FOREWORD: Focus on Advanced Ceramics Focus on Advanced Ceramics

NASA Astrophysics Data System (ADS)

Ohashi, Naoki

2011-06-01

Much research has been devoted recently to developing technologies for renewable energy and improving the efficiency of the processes and devices used in industry and everyday life. Efficient solutions have been found using novel materials such as platinum and palladium-based catalysts for car exhaust systems, samarium-cobalt and neodymium-iron-boron permanent magnets for electrical motors, and so on. However, their realization has resulted in an increasing demand for rare elements and in their deficit, the development of new materials based on more abundant elements and new functionalities of traditional materials. Moreover, increasing environmental and health concerns demand substitution of toxic or hazardous substances with nature-friendly alternatives. In this context, this focus issue on advanced ceramics aims to review current trends in ceramics science and technology. It is related to the International Conference on Science and Technology of Advanced Ceramics (STAC) held annually to discuss the emerging issues in the field of ceramics. An important direction of ceramic science is the collaboration between experimental and theoretical sciences. Recent developments in density functional theory and computer technology have enabled the prediction of physical and chemical properties of ceramics, thereby assisting the design of new materials. Therefore, this focus issue includes articles devoted to theory and advanced characterization techniques. As mentioned above, the potential shortage of rare elements is becoming critical to the industry and has resulted in a Japanese government initiative called the 'Ubiquitous Element Strategy'. This focus issue also includes articles related to this strategy and to the associated topics of energy conversion, such as phosphors for high-efficiency lighting and photocatalysts for solar-energy harvesting. We hope that this focus issue will provide a timely overview of current trends and problems in ceramics science and technology and promote new research and development in this field.

Components of a Comprehensive Market Research Program for Commuter Colleges.

ERIC Educational Resources Information Center

Clagett, Cragi

1999-01-01

Describes and evaluates eight elements of a comprehensive market-research program for commuter colleges: secondary research with formal environmental scanning, local business community-needs assessment; adult community-member telephone survey, classroom survey, new student survey, focus groups, brainstorming sessions, and survey of college…

Performance of an underwater acoustic volume array using time-reversal focusing.

PubMed

Root, Joseph A; Rogers, Peter H

2002-11-01

Time reversal permits acoustic focusing and beam forming in inhomogeneous and/or high-scattering environments. A volumetric array geometry can suppress back lobes and can fit a large, powerful array of elements into small spaces, like the free-water spaces on submarines. This research investigates applying the time-reversal method to an underwater acoustic volume array. The experiments evaluate the focusing performance of a 27-element volume array when different scattering structures are present within the volume of the array. The array is arranged in a 3x3x3 cubic matrix configuration with 18.75-cm vertical and horizontal element spacing. The system utilizes second-derivative Gaussian pulses to focus on a point 30 cm from the array. Results include a comparison between time-reversal focusing and standard focusing, an evaluation of the volume array's ability to suppress back lobes, and an analysis of how different scattering environments affect focal region size. Potential underwater applications for a volume array using time reversal include acoustic imaging, naval mine hunting, sonar, and underwater communications.

Performance of an underwater acoustic volume array using time-reversal focusing

NASA Astrophysics Data System (ADS)

Root, Joseph A.; Rogers, Peter H.

2002-11-01

Time reversal permits acoustic focusing and beam forming in inhomogeneous and/or high-scattering environments. A volumetric array geometry can suppress back lobes and can fit a large, powerful array of elements into small spaces, like the free-water spaces on submarines. This research investigates applying the time-reversal method to an underwater acoustic volume array. The experiments evaluate the focusing performance of a 27-element volume array when different scattering structures are present within the volume of the array. The array is arranged in a 3 x3 x3 cubic matrix configuration with 18.75-cm vertical and horizontal element spacing. The system utilizes second-derivative Gaussian pulses to focus on a point 30 cm from the array. Results include a comparison between time-reversal focusing and standard focusing, an evaluation of the volume array's ability to suppress back lobes, and an analysis of how different scattering environments affect focal region size. Potential underwater applications for a volume array using time reversal include acoustic imaging, naval mine hunting, sonar, and underwater communications. copyright 2002 Acoustical Society of America.

A Proposal for an Austrian Nursing Minimum Data Set (NMDS)

PubMed Central

Hackl, W.O.; Ammenwerth, E.

2014-01-01

Summary Objective Nursing Minimum Data Sets can be used to compare nursing care across clinical populations, settings, geographical areas, and time. NMDS can support nursing research, nursing management, and nursing politics. However, in contrast to other countries, Austria does not have a unified NMDS. The objective of this study is to identify possible data elements for an Austrian NMDS. Methods A two-round Delphi survey was conducted, based on a review of available NMDS, 22 expert interviews, and a focus group discussion. Results After reaching consensus, the experts proposed the following 56 data elements for an NMDS: six data elements concerning patient demographics, four data elements concerning data of the healthcare institution, four data elements concerning patient’s medical condition, 20 data elements concerning patient problems (nursing assessment, nursing diagnoses, risk assessment), eight data elements concerning nursing outcomes, 14 data elements concerning nursing interventions, and no additional data elements concerning nursing intensity. Conclusion The proposed NMDS focuses on the long-term and acute care setting. It must now be implemented and tested in the nursing practice. PMID:25024767

Identification and applications of the Petunia class II Act1/dTph1 transposable element system.

PubMed

Gerats, Tom; Zethof, Jan; Vandenbussche, Michiel

2013-01-01

Transposable genetic elements are considered to be ubiquitous. Despite this, their mutagenic capacity has been exploited in only a few species. The main plant species are maize, Antirrhinum, and Petunia. Representatives of all three major groups of class II elements, viz., hAT-, CACTA- and Mutator-like elements, have been identified in Petunia. Here we focus on the research "history" of the Petunia two-element Act1-dTph1 system and the development of its application in forward- and reverse-genetics studies.

Examining the Process of Developing a Research-Based Mathematics Curriculum and Its Policy Implications

ERIC Educational Resources Information Center

Superfine, Alison Castro; Kelso, Catherine Randall; Beal, Susan

2010-01-01

The implementation of "research-based" mathematics curricula is increasingly becoming a central element of mathematics education reform policies. Given the recent focus on grounding mathematics curriculum policies in research, it is important to understand precisely what it means for a curriculum to be research-based. Using the Curriculum Research…

As Medical Costs Soar, Health-Services Researchers Ask, What Works and What Doesn't?

ERIC Educational Resources Information Center

Wheeler, David L.

1990-01-01

Disenchantment with and heavy spending on health care has made policymakers more interested in health care research. The federal Agency for Health Care and Policy Research, university consortia for health-services research, and establishment of a national database are elements in a new focus on quality of care. (MSE)

Strategic Leadership Reconsidered

ERIC Educational Resources Information Center

Davies, Brent; Davies, Barbara J.

2005-01-01

This paper will address the challenge of how strategic leadership can be defined and articulated to provide a framework for developing a strategically focused school drawing on a NCSL research project. The paper is structured into three main parts. Part one outlines the elements that comprise a strategically focused school, develops an…

Cognitive Responses to Sociocultural Elements in Professional Graduate Programs: Two Case Studies

ERIC Educational Resources Information Center

Uhrig, Karl

2012-01-01

This article examines the sociocognitive context of two international students in academic programs in the United States. Bandura (2001) defines sociocognition as the interaction between an individual and the sociocultural elements that comprise his or her learning environment. Research in English for academic purposes has included more focus on…

Using a Critical Service-Learning Approach to Facilitate Civic Identity Development

ERIC Educational Resources Information Center

Mitchell, Tania D.

2015-01-01

This article highlights elements of civic engagement programs that have the rich potential to facilitate civic identity development. Focusing on research with alumni, the study examines 3 civic engagement programs, the approaches of which are guided by critical service-learning. It explores elements of the experiences that alumni name as…

Behavioral Health and Performance Element: Tools and Technologies

NASA Technical Reports Server (NTRS)

Leveton, Lauren B.

2009-01-01

This slide presentation reviews the research into the Behavioral Health and Performance (BHP) of the Human Research Program. The program element goal is to identify, characterize and prevent or reduce behavioral health and performance risks associated with space travel, exploration, and return to terrestrial life. To accomplish this goal the program focuses on applied research that is designed to yield deliverables that reduce risk. There are several different elements that are of particular interest: Behavioral Medicine, Sleep, and team composition, and team work. In order to assure success for NASA missions the Human Research Program develops and validate the standards for each of the areas of interest. There is discussion of the impact on BHP while astronauts are on Long Duration Missions. The effort in this research is to create tools to meet the BHP concerns, these prospective tools are reviewed.

Forensic Assertive Community Treatment: A Review of the Literature.

PubMed

Marquant, Thomas; Sabbe, Bernard; Van Nuffel, Meike; Goethals, Kris

2016-11-01

An extensive body of literature provides evidence supporting the effectiveness of assertive community treatment (ACT) with regard to non-forensic outcome measures, such as number of hospital admissions and length of stay. However, research findings on the effectiveness of ACT for forensic outcome measures, such as rearrests or detentions, is much less clear. The present review, therefore, focuses on the application of ACT in forensic populations, combining key elements of ACT with elements of forensic rehabilitation models. Specifically, a review of the literature was conducted using a systematic methodology in an attempt to combine evidence-based elements of 40 years of research on regular ACT with elements of forensic rehabilitation models. Results reveal limited yet promising evidence in support of the effectiveness of forensic ACT for forensic outcome measures. Implications for future research and clinical practice are discussed.

Competency-Based Education: Understanding the CBE Student's Experience

ERIC Educational Resources Information Center

Loveless, Jill L.

2017-01-01

Research on competency-based education (CBE) has primarily focused on elements of development, design, and implementation. The researcher interviewed students about their experiences in a CBE course as an avenue to deepen existing knowledge, build upon previous research, and improve development, design, and implementation. The researcher…

Science in the Elementary School Classroom: Portraits of Action Research.

ERIC Educational Resources Information Center

McDonald, Jane B., Ed.; Gilmer, Penny J., Ed.

Teacher knowledge and skills are critical elements in the student learning process. Action research serves as an increasingly popular technique to engage teachers in educational change in classrooms. This document focuses on action research reports of elementary school teachers. Chapters include: (1) "First Graders' Beliefs and Perceptions of…

Film Fabrication Technologies at NREL

NASA Technical Reports Server (NTRS)

Mcconnell, Robert D.

1993-01-01

The National Renewable Energy Laboratory (NREL) has extensive capabilities for fabricating a variety of high-technology films. Much of the in-house work in NREL's large photovoltaics (PV) program involves the fabrication of multiple thin-film semiconducting layers constituting a thin-film PV device. NREL's smaller program in superconductivity focuses on the fabrication of superconducting films on long, flexible tape substrates. This paper focuses on four of NREL's in-house research groups and their film fabrication techniques, developed for a variety of elements, alloys, and compounds to be deposited on a variety of substrates. As is the case for many national laboratories, NREL's technology transfer efforts are focusing on Cooperative Research and Development Agreements (CRADA's) between NREL researchers and private industry researchers.

The Carnegie Mellon/Sirsi Corporation Alliance.

ERIC Educational Resources Information Center

Troll, Denise A.; Depellegrin, Tracey A.; Myers, Melanie D.

1999-01-01

Describes the relationship between Carnegie Mellon University libraries and Sirsi Corporation, their integrated library-management system vendor. Topics include Carnegie Mellon's expertise in library automation research and development; and three primary elements of the alliance: research, including user protocols, surveys, and focus groups;…

Publishing Qualitative Research in Counseling Journals

ERIC Educational Resources Information Center

Hunt, Brandon

2011-01-01

This article focuses on the essential elements to be included when developing a qualitative study and preparing the findings for publication. Using the sections typically found in a qualitative article, the author describes content relevant to each section, with additional suggestions for publishing qualitative research.

Fostering Global Competence through Internationalization at American Research Universities. SERU Consortium Research Paper. Research & Occasional Paper Series: CSHE.10.17

ERIC Educational Resources Information Center

Shcheglova, Irina A.; Thomson, Gregg E.; Merrill, Martha C.

2017-01-01

American research universities have recently joined the march for internationalization and now are putting explicit efforts into finding ways to create an international focus. Within a short number of years, their missions have been transformed, incorporating elements of globalization. Universities now declare the importance of preparing students…

[Efficient identification and analysis of low and medium frequency repeats]. Progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jurka, J.

1991-08-28

The effective starting date of this grant was May 15. In the first three months of this project we focused primarily on organizational and technical aspects of our research which included: organization of the database of repeats in primates; preparation of software for rapid and sensitive search of novel repetitive elements in GenBank; purchase and installation of the Sun workstation; and research on the mammal-specific MAR1 family of repetitive elements (to be communicated in October).

(Efficient identification and analysis of low and medium frequency repeats)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jurka, J.

1991-08-28

The effective starting date of this grant was May 15. In the first three months of this project we focused primarily on organizational and technical aspects of our research which included: organization of the database of repeats in primates; preparation of software for rapid and sensitive search of novel repetitive elements in GenBank; purchase and installation of the Sun workstation; and research on the mammal-specific MAR1 family of repetitive elements (to be communicated in October).

Application of the Spectral Element Method to Interior Noise Problems

NASA Technical Reports Server (NTRS)

Doyle, James F.

1998-01-01

The primary effort of this research project was focused the development of analytical methods for the accurate prediction of structural acoustic noise and response. Of particular interest was the development of curved frame and shell spectral elements for the efficient computational of structural response and of schemes to match this to the surrounding fluid.

Predicting Elements of Early Maternal Elaborative Discourse from 12 to 18 Months of Age

ERIC Educational Resources Information Center

Ontai, Lenna L.; Virmani, Elita Amini

2010-01-01

To date, much of the research investigating maternal-child discourse has focused on the preschool period of children's development, with little attention paid to how these styles develop. The current study aimed to assess whether maternal elaborative discourse elements seen in preschool are also evident during the toddler years, and whether the…

Metadata Repository for Improved Data Sharing and Reuse Based on HL7 FHIR.

PubMed

Ulrich, Hannes; Kock, Ann-Kristin; Duhm-Harbeck, Petra; Habermann, Jens K; Ingenerf, Josef

2016-01-01

Unreconciled data structures and formats are a common obstacle to the urgently required sharing and reuse of data within healthcare and medical research. Within the North German Tumor Bank of Colorectal Cancer, clinical and sample data, based on a harmonized data set, is collected and can be pooled by using a hospital-integrated Research Data Management System supporting biobank and study management. Adding further partners who are not using the core data set requires manual adaptations and mapping of data elements. Facing this manual intervention and focusing the reuse of heterogeneous healthcare instance data (value level) and data elements (metadata level), a metadata repository has been developed. The metadata repository is an ISO 11179-3 conformant server application built for annotating and mediating data elements. The implemented architecture includes the translation of metadata information about data elements into the FHIR standard using the FHIR Data Element resource with the ISO 11179 Data Element Extensions. The FHIR-based processing allows exchange of data elements with clinical and research IT systems as well as with other metadata systems. With increasingly annotated and harmonized data elements, data quality and integration can be improved for successfully enabling data analytics and decision support.

The Lure of Statistics for Educational Researchers

ERIC Educational Resources Information Center

Labaree, David F.

2011-01-01

In this essay David Labaree explores the historical and sociological elements that have made educational researchers dependent on statistics. He shows that educational research as a domain, with its focus on a radically soft and thoroughly applied form of knowledge and with its low academic standing, fits the pattern in which weak professions have…

Research Elements: new article types by Elsevier to facilitate reproducibility in science

NASA Astrophysics Data System (ADS)

Zudilova-Seinstra, Elena; van Hensbergen, Kitty; Wacek, Bart

2016-04-01

When researchers start to make plans for new experiments, this is the beginning of a whole cycle of work, including experimental designs, tweaking of existing methods, developing protocols, writing code, collecting and processing experimental data, etc. A large part of this very useful information rarely gets published, which makes experiments difficult to reproduce. The same holds for experimental data, which is not always provided in a reusable format and lacks descriptive information. Furthermore, many types of data, such as a replication data, negative datasets or data from "intermediate experiments" often don't get published because they have no place in a research journal. To address this concern, Elsevier launched a series of peer-reviewed journal titles grouped under the umbrella of Research Elements (https://www.elsevier.com/books-and-journals/research-elements) that allow researchers to publish their data, software, materials and methods and other elements of the research cycle in a brief article format. To facilitate reproducibility, Research Elements have thoroughly thought out submission templates that include all necessary information and metadata as well as peer-review criteria defined per article type. Research Elements can be applicable to multiple research areas; for example, a number of multidisciplinary journals (Data in Brief, SoftwareX, MethodsX) welcome submissions from a large number of subject areas. At other times, these elements are better served within a single field; therefore, a number of domain-specific journals (e.g.: Genomics Data, Chemical Data Collections, Neurocomputing) support the new article formats, too. Upon publication, all Research Elements are assigned with persistent identifiers for direct citation and easy discoverability. Persistent identifiers are also used for interlinking Research Elements and relevant research papers published in traditional journals. Some Research Elements allow post-publication article updates. In the presentation, we will share our experiences and summarize lessons learned during the last two years. We will focus on three types of novel research publications: data articles, software articles and lab resources. We will also present two very recent developments targeting researchers working in Earth and Observational Sciences. And finally, we will illustrate how Research Elements fit in the Research Data Management landscape of a rich variety of services developed at Elsevier to assist researchers in sharing, finding, accessing, linking together and analyzing relevant research data.

Quality assessment and control of finite element solutions

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.; Babuska, Ivo

1987-01-01

Status and some recent developments in the techniques for assessing the reliability of finite element solutions are summarized. Discussion focuses on a number of aspects including: the major types of errors in the finite element solutions; techniques used for a posteriori error estimation and the reliability of these estimators; the feedback and adaptive strategies for improving the finite element solutions; and postprocessing approaches used for improving the accuracy of stresses and other important engineering data. Also, future directions for research needed to make error estimation and adaptive movement practical are identified.

NASA Human Research Program Space Radiation Program Element

NASA Technical Reports Server (NTRS)

Chappell, Lori; Huff, Janice; Patel, Janapriya; Wang, Minli; Hu, Shaowwen; Kidane, Yared; Myung-Hee, Kim; Li, Yongfeng; Nounu, Hatem; Plante, Ianik;

Good Schools: What Research Says about Improving Student Achievement.

ERIC Educational Resources Information Center

Hawley, Willis D.; And Others

1985-01-01

This journal, presented in monograph form, reviews research findings in order to identify elements that influence student academic achievement. Sections focus on effective teaching, effect of school leadership on achievement, schoolwide learning environment, learning resources, and parent involvement. An extensive bibliography is included. (DF)

Multivalent Narratives: Extending the Narrative Paradigm with Insights from Ancient Indian Rhetoric.

ERIC Educational Resources Information Center

Stroud, Scott R.

Research that has focused on ancient Indian rhetoric, a sub-category of Eastern rhetoric, has largely eschewed focus on the narrative paradigm as a theoretical guide. These narratives often enshrine didactic elements, contradictions, and mythic traits that often confound and inspire Western audiences. These archaic religious/philosophical texts…

Measures and Indicators of Vgi Quality: AN Overview

NASA Astrophysics Data System (ADS)

Antoniou, V.; Skopeliti, A.

2015-08-01

The evaluation of VGI quality has been a very interesting and popular issue amongst academics and researchers. Various metrics and indicators have been proposed for evaluating VGI quality elements. Various efforts have focused on the use of well-established methodologies for the evaluation of VGI quality elements against authoritative data. In this paper, a number of research papers have been reviewed and summarized in a detailed report on measures for each spatial data quality element. Emphasis is given on the methodology followed and the data used in order to assess and evaluate the quality of the VGI datasets. However, as the use of authoritative data is not always possible many researchers have turned their focus on the analysis of new quality indicators that can function as proxies for the understanding of VGI quality. In this paper, the difficulties in using authoritative datasets are briefly presented and new proposed quality indicators are discussed, as recorded through the literature review. We classify theses new indicators in four main categories that relate with: i) data, ii) demographics, iii) socio-economic situation and iv) contributors. This paper presents a dense, yet comprehensive overview of the research on this field and provides the basis for the ongoing academic effort to create a practical quality evaluation method through the use of appropriate quality indicators.

Research to Inform Nutrient Thresholds and Prioritization of ...

EPA Pesticide Factsheets

The information in this presentation focuses on SSWR's 4.02 project, which will advance the science needed to inform decisions to prioritize watersheds and nutrient sources for nutrient management and define appropriate nutrient levels for the nation’s waters, two important elements of EPA’s framework for managing nutrient pollution. The information in this presentation focuses on SSWR's 4.02 project, which will advance the science needed to inform decisions to prioritize watersheds and nutrient sources for nutrient management and define appropriate nutrient levels for the nation’s waters, two important elements of EPA’s framework for managing nutrient pollution.

The Guardian: The Source for Antiterrorism Information. Volume 9, Number 1, April 2007

DTIC Science & Technology

2007-04-01

the fuel in these research reactors is generally not highly radioactive . Unlike the fuel rods in a nuclear power plant, these fuel elements would...NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND...practices and lessons learned. In addition, we will include Service and issue-specific breakout sessions that will focus on critical AT program elements

Single Case Design Elements in Text Comprehension Research for Students with Developmental Disabilities

ERIC Educational Resources Information Center

Snyder, Sara M.; Knight, Victoria F.; Ayres, Kevin M.; Mims, Pamela J.; Sartini, Emily C.

2017-01-01

Recently researchers have begun exploring the efficacy of interventions designed to improve text comprehension skills for students with developmental disabilities (DD). Text comprehension is essential for understanding academic content as students with disabilities make progress in the general education curriculum. This article focuses on single…

Pedagogical Concerns in Doctoral Supervision: A Challenge for Pedagogy

ERIC Educational Resources Information Center

Zeegers, Margaret; Barron, Deirdre

2012-01-01

Purpose: The purpose of this paper is to focus on pedagogy as a crucial element in postgraduate research undertakings, implying active involvement of both student and supervisor in process of teaching and learning. Design/methodology/approach: Drawing on Australian higher degree research supervision practice to illustrate their argument, the…

Research to Controversy in 10 Decades

ERIC Educational Resources Information Center

Baker, Eva L.

2016-01-01

This article investigates the persistent and change elements of educational testing and assessment from 1920 to the present day. I show by examining the addresses and texts of American Educational Research Association presidents a continuing focus on schools, from early experiments and development up through applications in accountability systems.…

Parent-Adolescent Collaboration: An Interpersonal Model for Understanding Optimal Interactions

ERIC Educational Resources Information Center

Beveridge, Ryan M.; Berg, Cynthia A.

2007-01-01

Current parent-adolescent behavioral interaction research highlights the importance of three elements of behavior in defining adaptive interactions: autonomy, control, and warmth vs. hostility. However, this research has largely addressed the developmental needs and psychosocial outcomes of adolescents, as opposed to parents, with a focus on how…

The Survey with a Focus: Developing Critical and Creative Thinking Skills.

ERIC Educational Resources Information Center

Obergfell, Sandra C.

A modified, chronologically-based approach to the foreign language literature survey course integrates traditional elements of chronological organization with critical and concrete analysis of literary texts to increase the significance of the material to the liberal arts education. Research in higher education and research on left-right brain…

Data sharing platforms for de-identified data from human clinical trials.

PubMed

Huser, Vojtech; Shmueli-Blumberg, Dikla

2018-04-01

Data sharing of de-identified individual participant data is being adopted by an increasing number of sponsors of human clinical trials. In addition to standardizing data syntax for shared trial data, semantic integration of various data elements is the focus of several initiatives that define research common data elements. This perspective article, in the first part, compares several data sharing platforms for de-identified clinical research data in terms of their size, policies and supported features. In the second part, we use a case study approach to describe in greater detail one data sharing platform (Data Share from National Institute of Drug Abuse). We present data on the past use of the platform, data formats offered, data de-identification approaches and its use of research common data elements. We conclude with a summary of current and expected future trends that facilitate secondary research use of data from completed human clinical trials.

S/He Who Pays the Piper Calls the Tune? Professionalism, Developmentalism, and the Paucity of In-Service Education within the Research Profession

ERIC Educational Resources Information Center

Evans, Linda

2009-01-01

This paper focuses on the research-related, in-service professional development of social science academic researchers. It identifies as a gap in provision the paucity of provision of career-long training in the "creative" elements of research practice--specifically the methodological skills that have the potential to enhance individuals' research…

Trace Elements and Healthcare: A Bioinformatics Perspective.

PubMed

Zhang, Yan

2017-01-01

Biological trace elements are essential for human health. Imbalance in trace element metabolism and homeostasis may play an important role in a variety of diseases and disorders. While the majority of previous researches focused on experimental verification of genes involved in trace element metabolism and those encoding trace element-dependent proteins, bioinformatics study on trace elements is relatively rare and still at the starting stage. This chapter offers an overview of recent progress in bioinformatics analyses of trace element utilization, metabolism, and function, especially comparative genomics of several important metals. The relationship between individual elements and several diseases based on recent large-scale systematic studies such as genome-wide association studies and case-control studies is discussed. Lastly, developments of ionomics and its recent application in human health are also introduced.

Exploring Reticence in Research Methods: The Experience of Studying Psychological Research Methods in Higher Education

ERIC Educational Resources Information Center

Kingsley, Barbara E.; Robertson, Julia M.

2017-01-01

As a fundamental element of any psychology degree, the teaching and learning of research methods is repeatedly brought into sharp focus, and it is often regarded as a real challenge by undergraduate students. The reasons for this are complex, but frequently attributed to an aversion of maths. To gain a more detailed understanding of students'…

Achievement motivation and level of aspiration: adolescent Ethiopian immigrants in the Israeli education system.

PubMed

Horowitz, T R; Mosher, N

1997-01-01

This paper focuses on two questions: Are Ethiopian high school children who immigrated to Israel achievement motivated? To what extent does the presence or absence of certain components of the achievement construct in the indigenous value system of Ethiopian students affect progress at school? The study is based on pilot research conducted in Israel in 1987 for which the central research questions were: Are elements of motivation to be found in the indigenous value system of Ethiopian students? If so, what is their effect on progress at school? The research is based on a questionnaire administered to 88 Ethiopian students and 85 veteran Israeli students. The main findings of this research are: There are some elements in the socialization of Ethiopian students that can be looked upon as components of achievement motivation. These include a high level of aspiration, the ability to postpone gratification, and obedience. These elements help the Ethiopian children succeed at school. On the other hand, some elements in the socialization of Ethiopian children hinder their progress: conformity restraints on individual creativity and external locus of control.

Design and Aesthetics in E-Learning: A Usability and Credibility Perspective

ERIC Educational Resources Information Center

Glore, Peyton; David, Alicia

2012-01-01

This article reviews research pertaining to the use aesthetics design, and usability in education. This article focuses on defining the role of visual elements and aesthetics in the user interface while exploring the importance of their application in a web-based learning environment. Research demonstrates that aesthetics are pivotal in…

Study of the Entrepreneurship in Universities as Learning Organization Based on Senge Model

ERIC Educational Resources Information Center

Nejad, Bahareh Azizi; Abbaszadeh, Mir Mohammad Seiied; Hassani, Mohammad; Bernousi, Iraj

2012-01-01

Learning organization and entrepreneurship are the most important issues that are focused on different themes in management. The purpose of present research was to study the relationship between learning organization elements and entrepreneurship among academic faculty members of the West Azarbaijan State Universities. The research method was…

Sorrow and Solace: Neglected Areas in Bereavement Research

ERIC Educational Resources Information Center

Klass, Dennis

2013-01-01

The author argues that in its focus on finding positive outcomes, bereavement research has neglected or denigrated central phenomena in intense and long-term grief: sorrow and solace. Sorrow has two elements: yearning for the dead person and grief's depression. Consolation comes into sorrow in human relationships and from inner resources. The…

A Role for Language Analysis in Mathematics Textbook Analysis

ERIC Educational Resources Information Center

O'Keeffe, Lisa; O'Donoghue, John

2015-01-01

In current textbook analysis research, there is a strong focus on the content, structure and expectation presented by the textbook as elements for analysis. This research moves beyond such foci and proposes a framework for textbook language analysis which is intended to be integrated into an overall framework for mathematics textbook analysis. The…

Creativity in the Elementary Music Classroom: A Study of Students' Perceptions

ERIC Educational Resources Information Center

Coulson, Andrea N.; Burke, Brigid M.

2013-01-01

This research explored essential elements to be considered when teaching US students to develop and define creativity in the general elementary (students aged 5-11 years) music classroom. This case study focused on answering the following research questions: 1) What are students' perceptions of creativity? 2) How can music educators successfully…

SPECIATION OF ARSENIC IN EDIBLE BIOTA TO SUPPORT RISK ASSESSMENT DETERMINATION OF RELATIVE SOURCE CONTRIBUTION FOR ARSENIC

EPA Science Inventory

The Office of Research and Development has designated the study of arsenic as a high priority research area because of the health risk associated from exposure to this element. Present monitoring efforts are primarily focused on total concentration of arsenic in drinking water. ...

Understanding Why Researchers Should Use Synchrotron-Enhanced FTIR Instead of Traditional FTIR

ERIC Educational Resources Information Center

Stem, Michelle R.

2008-01-01

A synchrotron-enhanced Fourier transform infrared (SR-FTIR) specializes in combining the tremendous power, brightness, intensity, focusability, and tunability of the photons radiated by a synchrotron with FTIR ability to research the vibrational properties of the lighter elements (i.e., C, N, O, etc.). Infrared (IR) wavelengths correspond to the…

Co-Teaching an Online Action Research Class

ERIC Educational Resources Information Center

Wilson, Brent G.; Linder VanBerschot, Jennifer

2014-01-01

Two instructors report our experience co-teaching an action research (AR) required as part of an e-learning master's degree. Adopting a practice-centered stance we focus on the course activities of participants (instructors and students), with particular attention to the careful crafting of course elements with the goal of achieving an…

Antecedents of Identity Development in a Structured Recreation Setting: A Qualitative Inquiry

ERIC Educational Resources Information Center

Duerden, Mat D.; Taniguchi, Stacy; Widmer, Mark

2012-01-01

Identity research has focused primarily on outcomes associated with identity formation. Far less attention, however, has been given to understanding the facilitating contextual elements of this process. This qualitative study examined a context, a 2-week adventure recreation program for youth, quantitatively shown in previous research to have…

Emotionality and Learning Stories: Documenting How We Learn What We Feel

ERIC Educational Resources Information Center

Steele, Astrid; Scott, Jeff

2016-01-01

Based on a three-year research project in which outdoor and environmental education were embedded in classroom curricula, this paper considers learning story pedagogy and accompanying emotional elements often found in narratives. We draw on neuroscience research findings that support the importance of emotion in focusing attention and supporting…

Designing Feedback in an Immersive Videogame: Supporting Student Mathematical Engagement

ERIC Educational Resources Information Center

Gresalfi, Melissa Sommerfeld; Barnes, Jacqueline

2016-01-01

This paper draws from and contributes to two bodies of research: how particular elements of game design support learning; and how particular characteristics of feedback impact student engagement. This paper reports findings from two rounds of a design-based research project that focuses on better understanding how feedback is integrated into, and…

Action Research Study. A Framework To Help Move Teachers toward an Inquiry-Based Science Teaching Approach.

ERIC Educational Resources Information Center

Staten, Mary E.

This action research study developed a framework for moving teachers toward an inquiry-based approach to teaching science, emphasizing elements, strategies, and supports necessary to encourage and sustain teachers' use of inquiry-based science instruction. The study involved a literature review, participant observation, focus group discussions,…

Design and evaluation of a 63 element 1.75-dimensional ultrasound phased array for treating benign prostatic hyperplasia

NASA Astrophysics Data System (ADS)

Saleh, Khaldon Y.; Smith, Nadine B.

2003-10-01

Focused ultrasound surgery (FUS) is a clinical method for treating benign prostatic hyperplasia (BPH) in which tissue is noninvasively necrosed by elevating the temperature at the focal point above 60°C using short sonications. With 1.75-dimensional (1.75-D) arrays, the power and phase to the individual elements can be controlled electronically for focusing and steering. This research describes the design, construction and evaluation of a 1.75-D ultrasound phased array to be used in the treatment of benign prostatic hyperplasia. The array was designed with a steering angle of +/-13.5 deg in the transverse direction, and can move the focus in three parallel planes in the longitudinal direction with a relatively large focus size. A piezoelectric ceramic (PZT-8) was used as the material of the transducer and two matching layers were built for maximum acoustic power transmission to tissue. To verify the capability of the transducer for focusing and steering, exposimetry was performed and the results correlated well with the calculated fields. In vivo experiments were performed to verify the capability of the transducer to ablate tissue using short sonications. [Work supported by the Whitaker Foundation and the Department of Defense Congressionally Directed Medical Prostate Cancer Research Program.

"Girls Hit!" Constructing and Negotiating Violent African Femininities in a Working-Class Primary School

ERIC Educational Resources Information Center

Bhana, Deevia

2008-01-01

Whenever gender violence and schooling have been the topic of South African research, the investigations focus on African boys in secondary schools. In contrast, this paper focuses on the ways in which violence is mobilized by African schoolgirls in a working-class primary school context. By drawing on selected elements of an ethnographic study of…

Psychotherapy training: Suggestions for core ingredients and future research.

PubMed

Boswell, James F; Castonguay, Louis G

2007-12-01

Despite our considerable depth and breadth of empirical knowledge on psychotherapy process and outcome, research on psychotherapy training is somewhat lacking. We would argue, however, that the scientist-practitioner model should not only guide practice, but also the way our field approaches training. In this paper we outline our perspective on the crucial elements of psychotherapy training based on available evidence, theory, and clinical experience, focusing specifically on the structure, key components, and important skills to be learned in a successful training program. In addition, we derive specific research directions based on the crucial elements of our proposed training perspective, and offer general considerations for research on training, including method and measurement issues. (PsycINFO Database Record (c) 2010 APA, all rights reserved).

Gamification in Action: Theoretical and Practical Considerations for Medical Educators.

PubMed

Rutledge, Chrystal; Walsh, Catharine M; Swinger, Nathan; Auerbach, Marc; Castro, Danny; Dewan, Maya; Khattab, Mona; Rake, Alyssa; Harwayne-Gidansky, Ilana; Raymond, Tia T; Maa, Tensing; Chang, Todd P

2018-02-20

Gamification involves the application of game design elements to traditionally non-game contexts. It is increasingly being used as an adjunct to traditional teaching strategies in medical education to engage the millennial learner and enhance adult learning. The extant literature has focused on determining whether the implementation of gamification results in better learning outcomes, leading to a dearth of research examining its theoretical underpinnings within the medical education context. The authors define gamification, explore how gamification works within the medical education context using self-determination theory as an explanatory mechanism for enhanced engagement and motivation, and discuss common roadblocks and challenges to implementing gamification.While previous gamification research has largely focused on determining whether implementation of gamification in medical education leads to better learning outcomes, the authors recommend that future research should explore how and under what conditions gamification is likely to be effective. Selective, purposeful gamification that aligns with learning goals has the potential to increase learner motivation and engagement and, ultimately, learning. In line with self-determination theory, game design elements can be used to enhance learners' feelings of relatedness, autonomy, and competence to foster learners' intrinsic motivation. Poorly applied game design elements, however, may undermine these basic psychological needs by the overjustification effect or through negative effects of competition. Educators must, therefore, clearly understand the benefits and pitfalls of gamification in curricular design, take a thoughtful approach when integrating game design elements, and consider the types of learners and overarching learning objectives.

Are the Clinical Characteristics of Anxious Youths Participating in Non-Treatment-Related Research Comparable to Those of Youths Receiving Treatment?

ERIC Educational Resources Information Center

De Los Reyes, Andres; Alfano, Candice A.; Clementi, Michelle A.; Viana, Andres

2017-01-01

Background: A key element of the evidence-based assessment and treatment movements is ensuring an adequate representation of clients across the different settings in which they receive mental health care (e.g., research and routine or usual care settings). Prior work has focused on comparing clients from research settings to those from usual care…

Transportation research methods : a guide to searching for funding opportunities.

DOT National Transportation Integrated Search

2017-03-01

This project developed a training methodology focused on external funding. This hands-on training presented the basics of external funding identification, teambuilding and collaborative partners, and proposal element design. Real-time searches and tu...

Wavelet and Multiresolution Analysis for Finite Element Networking Paradigms

NASA Technical Reports Server (NTRS)

Kurdila, Andrew J.; Sharpley, Robert C.

1999-01-01

This paper presents a final report on Wavelet and Multiresolution Analysis for Finite Element Networking Paradigms. The focus of this research is to derive and implement: 1) Wavelet based methodologies for the compression, transmission, decoding, and visualization of three dimensional finite element geometry and simulation data in a network environment; 2) methodologies for interactive algorithm monitoring and tracking in computational mechanics; and 3) Methodologies for interactive algorithm steering for the acceleration of large scale finite element simulations. Also included in this report are appendices describing the derivation of wavelet based Particle Image Velocity algorithms and reduced order input-output models for nonlinear systems by utilizing wavelet approximations.

Unified control/structure design and modeling research

NASA Technical Reports Server (NTRS)

Mingori, D. L.; Gibson, J. S.; Blelloch, P. A.; Adamian, A.

1986-01-01

To demonstrate the applicability of the control theory for distributed systems to large flexible space structures, research was focused on a model of a space antenna which consists of a rigid hub, flexible ribs, and a mesh reflecting surface. The space antenna model used is discussed along with the finite element approximation of the distributed model. The basic control problem is to design an optimal or near-optimal compensator to suppress the linear vibrations and rigid-body displacements of the structure. The application of an infinite dimensional Linear Quadratic Gaussian (LQG) control theory to flexible structure is discussed. Two basic approaches for robustness enhancement were investigated: loop transfer recovery and sensitivity optimization. A third approach synthesized from elements of these two basic approaches is currently under development. The control driven finite element approximation of flexible structures is discussed. Three sets of finite element basic vectors for computing functional control gains are compared. The possibility of constructing a finite element scheme to approximate the infinite dimensional Hamiltonian system directly, instead of indirectly is discussed.

Learning Research as a Human Science: Old Wine in New Bottles?

ERIC Educational Resources Information Center

Penuel, William R.; O'Connor, Kevin

2010-01-01

Taken as a whole, this volume can be viewed as an argument for reframing learning research as a human science, one focused on interpreting learning situations and organizing for improving learning in ways that put human agency, values, and engagement with social practices at the center. Each chapter illuminates one or more elements of a human…

Leadership Matters: Teachers' Roles in School Decision Making and School Performance

ERIC Educational Resources Information Center

Ingersoll, Richard M.; Sirinides, Philip; Dougherty, Patrick

2018-01-01

Given the prominence of both instructional leadership and teacher leadership in the realms of school reform and policy, not surprisingly, both have also been the focus of extensive empirical research. But there have been limits to this research. It is, for example, unclear which of the many key elements of instructional leadership are more, or…

Composite mechanics for engine structures

NASA Technical Reports Server (NTRS)

Chamis, Christos C.

1987-01-01

Recent research activities and accomplishments at Lewis Research Center on composite mechanics for engine structures are summarized. The activities focused mainly on developing procedures for the computational simulation of composite intrinsic and structural behavior. The computational simulation encompasses all aspects of composite mechanics, advanced three-dimensional finite-element methods, damage tolerance, composite structural and dynamic response, and structural tailoring and optimization.

Composite mechanics for engine structures

NASA Technical Reports Server (NTRS)

Chamis, Christos C.

1989-01-01

Recent research activities and accomplishments at Lewis Research Center on composite mechanics for engine structures are summarized. The activities focused mainly on developing procedures for the computational simulation of composite intrinsic and structural behavior. The computational simulation encompasses all aspects of composite mechanics, advanced three-dimensional finite-element methods, damage tolerance, composite structural and dynamic response, and structural tailoring and optimization.

Correlational Study of Project Managers' Competence Experience, Education, and Technology Experience on Project

ERIC Educational Resources Information Center

Hosford, Bryan

2017-01-01

Organizations continue to rely on information technology (IT) as a foundational element, yet poor IT project success continues to impact growth and innovation. Research into IT project success is widespread yet has focused on high-level project management attributes, not specific IT solutions. A review of the research literature revealed that the…

Avoiding the Difference Fixation: Identity Categories, Markers of Difference, and the Teaching of Writing

ERIC Educational Resources Information Center

Kerschbaum, Stephanie L.

2012-01-01

In this essay, the author aims to show how a specific focus on interactionally emergent and rhetorically negotiated elements of a communicative situation can enrich the study of difference in composition research. She develops this argument by first identifying two strategies used by writing researchers when forwarding new understandings of…

Linking CALL and SLA: Using the IRIS Database to Locate Research Instruments

ERIC Educational Resources Information Center

Handley, Zöe; Marsden, Emma

2014-01-01

To establish an evidence base for future computer-assisted language learning (CALL) design, CALL research needs to move away from CALL versus non-CALL comparisons, and focus on investigating the differential impact of individual coding elements, that is, specific features of a technology which might have an impact on learning (Pederson, 1987).…

Dimensional Stability of Grout-Type Materials Used as Connections for Prefabricated Bridge Elements

DOT National Transportation Integrated Search

2016-05-01

The research presented in this report focuses on addressing performance concerns related to dimensional stability (primarily early age shrinkage) of 11 commercially available grout-type materials. Some of these grouts, especially those classified as ...

A breakthrough for experiencing and understanding simulated physics

NASA Technical Reports Server (NTRS)

Watson, Val

1988-01-01

The use of computer simulation in physics research is discussed, focusing on improvements to graphic workstations. Simulation capabilities and applications of enhanced visualization tools are outlined. The elements of an ideal computer simulation are presented and the potential for improving various simulation elements is examined. The interface between the human and the computer and simulation models are considered. Recommendations are made for changes in computer simulation practices and applications of simulation technology in education.

A governance model for integrated primary/secondary care for the health-reforming first world – results of a systematic review

PubMed Central

2013-01-01

Background Internationally, key health care reform elements rely on improved integration of care between the primary and secondary sectors. The objective of this systematic review is to synthesise the existing published literature on elements of current integrated primary/secondary health care. These elements and how they have supported integrated healthcare governance are presented. Methods A systematic review of peer-reviewed literature from PubMed, MEDLINE, CINAHL, the Cochrane Library, Informit Health Collection, the Primary Health Care Research and Information Service, the Canadian Health Services Research Foundation, European Foundation for Primary Care, European Forum for Primary Care, and Europa Sinapse was undertaken for the years 2006–2012. Relevant websites were also searched for grey literature. Papers were assessed by two assessors according to agreed inclusion criteria which were published in English, between 2006–2012, studies describing an integrated primary/secondary care model, and had reported outcomes in care quality, efficiency and/or satisfaction. Results Twenty-one studies met the inclusion criteria. All studies evaluated the process of integrated governance and service delivery structures, rather than the effectiveness of services. They included case reports and qualitative data analyses addressing policy change, business issues and issues of clinical integration. A thematic synthesis approach organising data according to themes identified ten elements needed for integrated primary/secondary health care governance across a regional setting including: joint planning; integrated information communication technology; change management; shared clinical priorities; incentives; population focus; measurement – using data as a quality improvement tool; continuing professional development supporting joint working; patient/community engagement; and, innovation. Conclusions All examples of successful primary/secondary care integration reported in the literature have focused on a combination of some, if not all, of the ten elements described in this paper, and there appears to be agreement that multiple elements are required to ensure successful and sustained integration efforts. Whilst no one model fits all systems these elements provide a focus for setting up integration initiatives which need to be flexible for adapting to local conditions and settings. PMID:24359610

A governance model for integrated primary/secondary care for the health-reforming first world - results of a systematic review.

PubMed

Nicholson, Caroline; Jackson, Claire; Marley, John

2013-12-20

Internationally, key health care reform elements rely on improved integration of care between the primary and secondary sectors. The objective of this systematic review is to synthesise the existing published literature on elements of current integrated primary/secondary health care. These elements and how they have supported integrated healthcare governance are presented. A systematic review of peer-reviewed literature from PubMed, MEDLINE, CINAHL, the Cochrane Library, Informit Health Collection, the Primary Health Care Research and Information Service, the Canadian Health Services Research Foundation, European Foundation for Primary Care, European Forum for Primary Care, and Europa Sinapse was undertaken for the years 2006-2012. Relevant websites were also searched for grey literature. Papers were assessed by two assessors according to agreed inclusion criteria which were published in English, between 2006-2012, studies describing an integrated primary/secondary care model, and had reported outcomes in care quality, efficiency and/or satisfaction. Twenty-one studies met the inclusion criteria. All studies evaluated the process of integrated governance and service delivery structures, rather than the effectiveness of services. They included case reports and qualitative data analyses addressing policy change, business issues and issues of clinical integration. A thematic synthesis approach organising data according to themes identified ten elements needed for integrated primary/secondary health care governance across a regional setting including: joint planning; integrated information communication technology; change management; shared clinical priorities; incentives; population focus; measurement - using data as a quality improvement tool; continuing professional development supporting joint working; patient/community engagement; and, innovation. All examples of successful primary/secondary care integration reported in the literature have focused on a combination of some, if not all, of the ten elements described in this paper, and there appears to be agreement that multiple elements are required to ensure successful and sustained integration efforts. Whilst no one model fits all systems these elements provide a focus for setting up integration initiatives which need to be flexible for adapting to local conditions and settings.

Extended depth of field integral imaging using multi-focus fusion

NASA Astrophysics Data System (ADS)

Piao, Yongri; Zhang, Miao; Wang, Xiaohui; Li, Peihua

2018-03-01

In this paper, we propose a new method for depth of field extension in integral imaging by realizing the image fusion method on the multi-focus elemental images. In the proposed method, a camera is translated on a 2D grid to take multi-focus elemental images by sweeping the focus plane across the scene. Simply applying an image fusion method on the elemental images holding rich parallax information does not work effectively because registration accuracy of images is the prerequisite for image fusion. To solve this problem an elemental image generalization method is proposed. The aim of this generalization process is to geometrically align the objects in all elemental images so that the correct regions of multi-focus elemental images can be exacted. The all-in focus elemental images are then generated by fusing the generalized elemental images using the block based fusion method. The experimental results demonstrate that the depth of field of synthetic aperture integral imaging system has been extended by realizing the generation method combined with the image fusion on multi-focus elemental images in synthetic aperture integral imaging system.

Guide to Academic Research Career Development

PubMed Central

Smith, Richard J.; Graboyes, Evan M.; Paniello, Randal C.; Paul Gubbels, Samuel

2016-01-01

Objectives/Hypothesis Development of an academic career easily follows a clinical course for which there are multiple role models; however, development of an academic research career involves few role models, and rarely do instructional guides reach out to the new faculty. The purpose of this article is to present the cumulative experiences of previously and currently funded authors to serve as a guide to young as well as older faculty for developing their research careers. Study Design Cumulative experiences of research‐dedicated faculty. Methods This article is the result of lessons learned from developing a Triological Society National Physician‐Scientist Program and Network, as well as the cumulative experiences of the authors. Results Table I illustrates key elements in developing a serious research career. Table II records the career courses of five surgeon‐scientists, highlighting the continued theme focus with theme‐specific publications and progressive grants. These cumulative experiences have face validity but have not been objectively tested. The value added is a composite of 50 years of experiences from authors committed to research career development for themselves and others. Conclusion Crucial elements in developing a research career are a desire for and commitment to high‐quality research, a focus on an overall theme of progressive hypothesis‐driven investigations, research guidance, a willingness to spend the time required, and an ability to learn from and withstand failure. Level of Evidence 5. PMID:28894799

Adult Attitudes Toward the Military: Poll One

DTIC Science & Technology

2002-04-01

EXECUTIVE SUMMARY The Department of Defense (DoD) uses market research to adapt advertising content and focus recruiting strategies . DoD market ... advertising as a major element in its recruitment marketing strategy . The primary objectives of advertising are: • Establish and sustain an...communications strategies and recommendations for each market . The Defense Manpower Data Center (DMDC) was responsible for this research. A two

Secondary-to-Tertiary Comparison through the Lens of Ways of Doing Mathematics in Relation to Functions: A Study in Collaboration with Teachers

ERIC Educational Resources Information Center

Corriveau, Claudia

2017-01-01

This article addresses the issue of transition from secondary to post-secondary education through collaborative research with teachers from both levels. It takes into account implicit elements in this transition. Research on the transition in mathematics education tends to focus more on the tertiary level, studying difficulties encountered by…

Nonlinear modelling in time domain numerical analysis of stringed instrument dynamics

NASA Astrophysics Data System (ADS)

Bielski, Paweł; Kujawa, Marcin

2017-03-01

Musical instruments are very various in terms of sound quality with their timbre shaped by materials and geometry. Materials' impact is commonly treated as dominant one by musicians, while it is unclear whether it is true or not. The research proposed in the study focuses on determining influence of both these factors on sound quality based on their impact on harmonic composition. Numerical approach has been chosen to allowed independent manipulation of geometrical and material parameters as opposed to experimental study subjected to natural randomness of instrument construction. Distinctive element of this research is precise modelling of whole instrument and treating it as one big vibrating system instead of performing modal analysis on an isolated part. Finite elements model of a stringed instrument has been built and a series of nonlinear time-domain dynamic analyses were executed to obtain displacement signals and perform subsequent spectral analysis. Precision of computations seems sufficient to determine the influence of instrument's macroscopic mechanical parameters on timbre. Further research should focus on implementation of acoustic medium in attempt to include dissipation and synchronization mechanisms. Outside the musical field this kind of research could be potentially useful in noise reduction problems.

Experts' opinions on the management of medically unexplained symptoms in primary care. A qualitative analysis of narrative reviews and scientific editorials.

PubMed

Heijmans, Mieke; Olde Hartman, Tim C; van Weel-Baumgarten, Evelyn; Dowrick, Christopher; Lucassen, Peter L B J; van Weel, Chris

2011-08-01

The feasibility as well as the suitability of several therapies for medically unexplained symptoms (MUS) in primary care applied by the family physician (FP) appeared to be low. FPs need effective and acceptable strategies to manage these functionally impaired patients. To review important and effective elements in the treatment of patients with MUS in primary care according to experts in MUS research. We performed a systematic search of narrative reviews and scientific editorials in Medline and PsycINFO and triangulated our findings by conducting a focus group with MUS experts. We included 7 scientific editorials and 23 narrative reviews. According to MUS experts, the most important elements in the treatment of MUS are creating a safe therapeutic environment, generic interventions (such as motivational interviewing, giving tangible explanations, reassurance and regularly scheduled appointments) and specific interventions (such as cognitive approaches and pharmacotherapy). Furthermore, MUS experts indicate that a multi-component approach in which these three important elements are combined are most helpful for patients with MUS. In contrast to most specific interventions, opinions of MUS experts regarding generic interventions and creating a safe therapeutic relationship seem to be more based on theory and experience than on quantitative research. MUS experts highlight the importance of generic interventions and doctor-patient communication and relationship. However, studies showing the effectiveness of these elements in the management of MUS in primary care is still scarce. Research as well as medical practice should focus more on these non-specific aspects of the medical consultation.

Habit Reversal Therapy for Body-Focused Repetitive Behaviors in Williams Syndrome: A Case Study

PubMed Central

Klein-Tasman, Bonita P.

2013-01-01

Williams syndrome (WS) is genetic neurodevelopmental disorder with a well-characterized cognitive and behavioral phenotype. Research has consistently demonstrated high rates of psychopathology in this population; however, little research has examined the use of empirically-supported psychosocial interventions in those with WS. The current case study reports on the use of Habit Reversal Therapy (HRT) to treat multiple body-focused repetitive behaviors in a child with WS. Although HRT is a well-established cognitive-behavioral intervention for body-focused repetitive behaviors, it has been infrequently used in populations with developmental disabilities. An etiologically-informed approach was used to adapt HRT to fit the known behavioral and cognitive phenotype of WS. Results suggest that HRT may be beneficial for this population. Modified treatment elements are described and future research areas highlighted. PMID:24357918

Application of the Spectral Element Method to Acoustic Radiation

NASA Technical Reports Server (NTRS)

Doyle, James F.; Rizzi, Stephen A. (Technical Monitor)

2000-01-01

This report summarizes research to develop a capability for analysis of interior noise in enclosed structures when acoustically excited by an external random source. Of particular interest was the application to the study of noise and vibration transmission in thin-walled structures as typified by aircraft fuselages. Three related topics are focused upon. The first concerns the development of a curved frame spectral element, the second shows how the spectral element method for wave propagation in folded plate structures is extended to problems involving curved segmented plates. These are of significance because by combining these curved spectral elements with previously presented flat spectral elements, the dynamic response of geometrically complex structures can be determined. The third topic shows how spectral elements, which incorporate the effect of fluid loading on the structure, are developed for analyzing acoustic radiation from dynamically loaded extended plates.

Strategic, Analytic and Operational Domains of Information Management.

ERIC Educational Resources Information Center

Diener, Richard AV

1992-01-01

Discussion of information management focuses on three main areas of activities and their interrelationship: (1) strategic, including establishing frameworks and principles of operations; (2) analytic, or research elements, including user needs assessment, data gathering, and data analysis; and (3) operational activities, including reference…

Distribution factors for construction loads and girder capacity equations [project summary].

DOT National Transportation Integrated Search

2017-03-01

This project focused on the use of Florida I-beams (FIBs) in bridge construction. University of Florida researchers used analytical models and finite element analysis to update equations used in the design of bridges using FIBs. They were particularl...

How Do You Build Community and Foster Engagement in Online Courses?

ERIC Educational Resources Information Center

Dolan, Joanne; Kain, Kevin; Reilly, Janet; Bansal, Gaurav

2017-01-01

This chapter reviews research linking the importance of community in increasing engagement in online courses from an interdisciplinary perspective. Additionally, we identify applicable teaching strategies that focus on the important elements of community building, namely teaching, social, and cognitive presence.

Sourcing in the Air Force: An Optimization Approach

DTIC Science & Technology

2009-09-01

quality supplies and services at the lowest cost ( Gabbard , 2004). The commodity sourcing strategy focuses on developing a specific sourcing strategy...Springer Series in Operations Research. New York: Springer-Verlag. Gabbard , E.G. (2004, April). Strategic sourcing: Critical elements and keys to success

High-temperature electronics

NASA Technical Reports Server (NTRS)

Matus, Lawrence G.; Seng, Gary T.

1990-01-01

To meet the needs of the aerospace propulsion and space power communities, the high temperature electronics program at the Lewis Research Center is developing silicon carbide (SiC) as a high temperature semiconductor material. This program supports a major element of the Center's mission - to perform basic and developmental research aimed at improving aerospace propulsion systems. Research is focused on developing the crystal growth, characterization, and device fabrication technologies necessary to produce a family of SiC devices.

A 2-D Interface Element for Coupled Analysis of Independently Modeled 3-D Finite Element Subdomains

NASA Technical Reports Server (NTRS)

Kandil, Osama A.

1998-01-01

Over the past few years, the development of the interface technology has provided an analysis framework for embedding detailed finite element models within finite element models which are less refined. This development has enabled the use of cascading substructure domains without the constraint of coincident nodes along substructure boundaries. The approach used for the interface element is based on an alternate variational principle often used in deriving hybrid finite elements. The resulting system of equations exhibits a high degree of sparsity but gives rise to a non-positive definite system which causes difficulties with many of the equation solvers in general-purpose finite element codes. Hence the global system of equations is generally solved using, a decomposition procedure with pivoting. The research reported to-date for the interface element includes the one-dimensional line interface element and two-dimensional surface interface element. Several large-scale simulations, including geometrically nonlinear problems, have been reported using the one-dimensional interface element technology; however, only limited applications are available for the surface interface element. In the applications reported to-date, the geometry of the interfaced domains exactly match each other even though the spatial discretization within each domain may be different. As such, the spatial modeling of each domain, the interface elements and the assembled system is still laborious. The present research is focused on developing a rapid modeling procedure based on a parametric interface representation of independently defined subdomains which are also independently discretized.

Searching for serial refreshing in working memory: Using response times to track the content of the focus of attention over time.

PubMed

Vergauwe, Evie; Hardman, Kyle O; Rouder, Jeffrey N; Roemer, Emily; McAllaster, Sara; Cowan, Nelson

2016-12-01

One popular idea is that, to support the maintenance of a set of elements over brief periods of time, the focus of attention rotates among the different elements, thereby serially refreshing the content of working memory (WM). In the research reported here, probe letters were presented between to-be-remembered letters, and response times to these probes were used to infer the status of the different items in WM. If the focus of attention cycles from one item to the next, its content should be different at different points in time, and this should be reflected in a change in the response time patterns over time. Across a set of four experiments, we demonstrated a striking pattern of invariance in the response time patterns over time, suggesting either that the content of the focus of attention did not change over time or that response times cannot be used to infer the content of the focus of attention. We discuss how this pattern constrains models of WM, attention, and human information processing.

The Columbia University Sub-micron Charged Particle Beam

PubMed Central

Randers-Pehrson, Gerhard; Johnson, Gary W.; Marino, Stephen A.; Xu, Yanping; Dymnikov, Alexander D.; Brenner, David J.

2009-01-01

A lens system consisting of two electrostatic quadrupole triplets has been designed and constructed at the Radiological Research Accelerator Facility (RARAF) of Columbia University. The lens system has been used to focus 6-MeV 4He ions to a beam spot in air with a diameter of 0.8 µm. The quadrupole electrodes can withstand voltages high enough to focus 4He ions up to 10 MeV and protons up to 5 MeV. The quadrupole triplet design is novel in that alignment is made through precise construction and the relative strengths of the quadrupoles are accomplished by the lengths of the elements, so that the magnitudes of the voltages required for focusing are nearly identical. The insulating sections between electrodes have had ion implantation to improve the voltage stability of the lens. The lens design employs Russian symmetry for the quadrupole elements. PMID:20161365

Weak form implementation of the semi-analytical finite element (SAFE) method for a variety of elastodynamic waveguides

NASA Astrophysics Data System (ADS)

Hakoda, Christopher; Lissenden, Clifford; Rose, Joseph L.

2018-04-01

Dispersion curves are essential to any guided wave NDE project. The Semi-Analytical Finite Element (SAFE) method has significantly increased the ease by which these curves can be calculated. However, due to misconceptions regarding theory and fragmentation based on different finite-element software, the theory has stagnated, and adoption by researchers who are new to the field has been slow. This paper focuses on the relationship between the SAFE formulation and finite element theory, and the implementation of the SAFE method in a weak form for plates, pipes, layered waveguides/composites, curved waveguides, and arbitrary cross-sections is shown. The benefits of the weak form are briefly described, as is implementation in open-source and commercial finite element software.

Extracting More Information from Passive Optical Tracking Observations for Reliable Orbit Element Generation

NASA Astrophysics Data System (ADS)

Bennett, J.; Gehly, S.

2016-09-01

This paper presents results from a preliminary method for extracting more orbital information from low rate passive optical tracking data. An improvement in the accuracy of the observation data yields more accurate and reliable orbital elements. A comparison between the orbit propagations from the orbital element generated using the new data processing method is compared with the one generated from the raw observation data for several objects. Optical tracking data collected by EOS Space Systems, located on Mount Stromlo, Australia, is fitted to provide a new orbital element. The element accuracy is determined from a comparison between the predicted orbit and subsequent tracking data or reference orbit if available. The new method is shown to result in a better orbit prediction which has important implications in conjunction assessments and the Space Environment Research Centre space object catalogue. The focus is on obtaining reliable orbital solutions from sparse data. This work forms part of the collaborative effort of the Space Environment Management Cooperative Research Centre which is developing new technologies and strategies to preserve the space environment (www.serc.org.au).

World Materials Summit (3rd). Held in Washington, DC on 9-12 October, 2011

DTIC Science & Technology

2012-05-23

It focused on the critical links among materials research, energy, and sustainable development on a global scale. Abundant clean energy supplies and...reliable energy storage systems are needed to address many critical societal issues in development and developed countries. On a broader scale, access...Houle of the Lawrence Berkeley National Laboratory spoke next about "Energy Critical Elements," focusing on the well-known shortage of rare earth (RE

The Relationship between Approaches to Teaching, Approaches to E-Teaching and Perceptions of the Teaching Situation in Relation to E-Learning among Higher Education Teachers

ERIC Educational Resources Information Center

Gonzalez, Carlos

2012-01-01

This study extends prior research on approaches to teaching and perceptions of the teaching situation by investigating these elements when e-learning is involved. In this study, approaches to teaching ranged from a focus on the teacher and the taught content to a focus on the student and their learning, resembling those reported in previous…

A Qualitative Experiment: Research on Mediated Meaning Construction Using a Hybrid Approach

ERIC Educational Resources Information Center

Robinson, Sue; Mendelson, Andrew L.

2012-01-01

This article presents a hybrid methodological technique that fuses elements of experimental design with qualitative strategies to explore mediated communication. Called the "qualitative experiment," this strategy uses focus groups and in-depth interviews "within" randomized stimulus conditions typically associated with…

Academic Fatalism: Applying Durkheim's Fatalistic Suicide Typology to Student Drop-Out and the Climate of Higher Education

ERIC Educational Resources Information Center

Godor, Brian P.

2017-01-01

Student drop-out remains a critical issue facing educational professionals. For higher education, the vast research in the past 40 years has been influenced by the work of Tinto and his model of student persistence. In this model are several elements that have proven to sharpen the focus of student drop-out research such as the concept of…

Primary Teachers' Written Unit Plans in Mathematics and Their Perceptions of Essential Elements of These

ERIC Educational Resources Information Center

Roche, Anne; Clarke, Doug M.; Clarke, David J.; Sullivan, Peter

2014-01-01

The content and purpose of written unit plans in mathematics is an under-researched area. In this article, we provide a brief overview of research on teachers' planning processes and the place of mental and written plans. We report on data from a questionnaire completed by 357 teachers from Victorian Catholic primary schools, where we focused on…

Primary teachers' written unit plans in mathematics and their perceptions of essential elements of these

NASA Astrophysics Data System (ADS)

Roche, Anne; Clarke, Doug M.; Clarke, David J.; Sullivan, Peter

2014-12-01

The content and purpose of written unit plans in mathematics is an under-researched area. In this article, we provide a brief overview of research on teachers' planning processes and the place of mental and written plans. We report on data from a questionnaire completed by 357 teachers from Victorian Catholic primary schools, where we focused on possible elements of written unit plans for primary mathematics, and the relative importance which teachers attributed to these elements. We then discuss 48 written unit plans which were provided to us by primary schools from which the 357 teachers were drawn. There was considerable variation in the length, intended teaching time, and level of specification of key ideas in these plans. We discuss this variation, and some discrepancies between the ratings of teachers of the importance of certain elements and their presence in the plans we examined. We also suggest potentially productive areas of future enquiry.

Transcranial Propagation with an Ultrasonic Mono-element Focused Transducer

NASA Astrophysics Data System (ADS)

Iglesias, P. C.; Jiménez, N.; Konofagou, E.; Camarena, F.; Redondo, J.

Focused Ultrasound is the only truly transient, local and non-invasive technique able to induce safe Blood-Brain Barrier Opening (BBBO), technique used in Parkinson or Alzheimer diseases research. However, the presence of the skull in the path usually affects the focus characteristics (gain, beam width, shape and maxima location). In this work, transcranial acoustic wave propagation generated by a mono-element focused transducer has been modeled using 2D and 3D FDTD methods. Skull structure of the non-human primate under test can be compared in terms of density and sound speed with polymethylmethacrylate (PMMA) films. Then, focus aberration and the phenomena that cause it are characterized, providing a better control of the beam focus using the BBBO technique. Results throw that focal axial displacements are constant with the angle of incidence for PMMA flat films. In normal incidence, a shift of 6 mm is given for axial displacement in the 2D transcranial propagation. Moreover, if the skull geometry under the action of the ultrasonic beam can be compared with the curvature radius of the transducer, displacements should be constant with angle independency, like those seeing in the homogenous flat films with the same thickness.

Database Comparison of the Adult-to-Adult Living Donor Liver Transplantation Cohort Study (A2ALL) and the SRTR U.S. Transplant Registry1,2,3

PubMed Central

Gillespie, BW; Merion, RM; Ortiz-Rios, E; Tong, L; Shaked, A; Brown, RS; Ojo, AO; Hayashi, PH; Berg, CL; Abecassis, MM; Ashworth, AS; Friese, CE; Hong, JC; Trotter, JF; Everhart, JE

2010-01-01

Data submitted by transplant programs to the Organ Procurement and Transplantation Network (OPTN) are used by the Scientific Registry of Transplant Recipients (SRTR) for policy development, performance evaluation, and research. This study compared OPTN/SRTR data with data extracted from medical records by research coordinators from the nine-center A2ALL study. A2ALL data were collected independently of OPTN data submission (48 data elements among 785 liver transplant candidates/recipients; 12 data elements among 386 donors). At least 90% agreement occurred between OPTN/SRTR and A2ALL for 11/29 baseline recipient elements, 4/19 recipient transplant or follow-up elements, and 6/12 donor elements. For the remaining recipient and donor elements, >10% of values were missing in OPTN/SRTR but present in A2ALL, confirming that missing data were largely avoidable. Other than variables required for allocation, the percentage missing varied widely by center. These findings support an expanded focus on data quality control by OPTN/SRTR for a broader variable set than those used for allocation. Center-specific monitoring of missing values could substantially improve the data. PMID:20199501

Trace elements in Mediterranean seagrasses and macroalgae. A review.

PubMed

Bonanno, Giuseppe; Orlando-Bonaca, Martina

2018-03-15

This review investigates the current state of knowledge on the levels of the main essential and non-essential trace elements in Mediterranean vascular plants and macroalgae. The research focuses also on the so far known effects of high element concentrations on these marine organisms. The possible use of plants and algae as bioindicators of marine pollution is discussed as well. The presence of trace elements is overall well known in all five Mediterranean vascular plants, whereas current studies investigated element concentrations in only c. 5.0% of all native Mediterranean macroalgae. Although seagrasses and macroalgae can generally accumulate and tolerate high concentrations of trace elements, phytotoxic levels are still not clearly identified for both groups of organisms. Moreover, although the high accumulation of trace elements in seagrasses and macroalgae is considered as a significant risk for the associated food webs, the real magnitude of this risk has not been adequately investigated yet. The current research provides enough scientific evidence that seagrasses and macroalgae may act as effective bioindicators, especially the former for trace elements in sediments, and the latter in seawater. The combined use of seagrasses and macroalgae as bioindicators still lacks validated protocols, whose application should be strongly encouraged to biomonitor exhaustively the presence of trace elements in the abiotic and biotic components of coastal ecosystems. Copyright © 2017 Elsevier B.V. All rights reserved.

Transposable elements as genetic regulatory substrates in early development.

PubMed

Gifford, Wesley D; Pfaff, Samuel L; Macfarlan, Todd S

2013-05-01

The abundance and ancient origins of transposable elements (TEs) in eukaryotic genomes has spawned research into the potential symbiotic relationship between these elements and their hosts. In this review, we introduce the diversity of TEs, discuss how distinct classes are uniquely regulated in development, and describe how they appear to have been coopted for the purposes of gene regulation and the orchestration of a number of processes during early embryonic development. Although young, active TEs play an important role in somatic tissues and evolution, we focus mostly on the contributions of the older, fixed elements in mammalian genomes. We also discuss major challenges inherent in the study of TEs and contemplate future experimental approaches to further investigate how they coordinate developmental processes. Published by Elsevier Ltd.

Transposable elements as genetic regulatory substrates in early development

PubMed Central

Gifford, Wesley D.; Pfaff, Samuel L.; Macfarlan, Todd S.

2014-01-01

The abundance and ancient origins of transposable elements (TEs) in eukaryotic genomes has spawned research into the potential symbiotic relationship between these elements and their hosts. In this review, we introduce the diversity of TEs, discuss how distinct classes are uniquely regulated in development, and describe how they appear to have been coopted for the purposes of gene regulation and the orchestration of a number of processes during early embryonic development. Although young, active TEs play an important role in somatic tissues and evolution, we focus mostly on the contributions of the older, fixed elements in mammalian genomes. We also discuss major challenges inherent in the study of TEs and contemplate future experimental approaches to further investigate how they coordinate developmental processes. PMID:23411159

Metrics for the NASA Airspace Systems Program

NASA Technical Reports Server (NTRS)

Smith, Jeremy C.; Neitzke, Kurt W.

2009-01-01

This document defines an initial set of metrics for use by the NASA Airspace Systems Program (ASP). ASP consists of the NextGen-Airspace Project and the NextGen-Airportal Project. The work in each project is organized along multiple, discipline-level Research Focus Areas (RFAs). Each RFA is developing future concept elements in support of the Next Generation Air Transportation System (NextGen), as defined by the Joint Planning and Development Office (JPDO). In addition, a single, system-level RFA is responsible for integrating concept elements across RFAs in both projects and for assessing system-wide benefits. The primary purpose of this document is to define a common set of metrics for measuring National Airspace System (NAS) performance before and after the introduction of ASP-developed concepts for NextGen as the system handles increasing traffic. The metrics are directly traceable to NextGen goals and objectives as defined by the JPDO and hence will be used to measure the progress of ASP research toward reaching those goals. The scope of this document is focused on defining a common set of metrics for measuring NAS capacity, efficiency, robustness, and safety at the system-level and at the RFA-level. Use of common metrics will focus ASP research toward achieving system-level performance goals and objectives and enable the discipline-level RFAs to evaluate the impact of their concepts at the system level.

Chinese children with autism: A multiple chemical elements profile in erythrocytes.

PubMed

Wu, Jing; Liu, Duo-Jian; Shou, Xiao-Jing; Zhang, Ji-Shui; Meng, Fan-Chao; Liu, Ya-Qiong; Han, Song-Ping; Zhang, Rong; Jia, Jin-Zhu; Wang, Jing-Yu; Han, Ji-Sheng

2018-06-01

Several lines of evidence suggested that abnormal levels of certain chemical elements may contribute to the development of autism spectrum disorders (ASD). The present work aimed to investigate the multiple chemical elements profile in the erythrocytes of autistic versus typically developing children (TDC) of China. Analyses were carried out to explore the possible association between levels of elements and the risk as well as the severity of ASD. Erythrocyte levels of 11 elements (32%) among 34 detected elements in autistic group were significantly different from those in the TDC group. To our knowledge, this is the first study which compared the levels of rare earth elements in erythrocytes between children with or without ASD. Five elements including Pb, Na, Ca, Sb, and La are associated with the Childhood Autism Rating Scale (CARS) total score. Also, a series of tendencies were found in this research which was believed to affect auditory response, taste, smell, and touch, as well as fear or nervousness. It can be concluded that Chinese autistic children suffer from multi-chemical element imbalances which involves a complex combination of genetic and environmental factors. The results showed a significant correlation between abnormal levels of several chemical elements and the severity of the autistic syndrome. It is suggested that abnormal levels of some chemical elements may contribute to the development of autism spectrum disorders (ASD). In this work, the impact of element imbalances on the risk and severity of ASD was investigated, focusing on the analysis of abnormal levels of the multi-chemical elements profile in erythrocytes compared with typically developing children. Furthermore, the results showed a significant correlation between abnormal levels of several chemical elements and the severity of the autistic syndrome. Autism Res 2018, 11: 834-845. © 2018 International Society for Autism Research, Wiley Periodicals, Inc. © 2018 International Society for Autism Research, Wiley Periodicals, Inc.

Satisfaction and dissatisfaction in the work of recyclable solid waste segregators: convergent-care research.

PubMed

Coelho, Alexa Pupiara Flores; Beck, Carmem Lúcia Colomé; Silva, Rosângela Marion da; Prestes, Francine Cassol; Camponogara, Silviamar; Peserico, Anahlú

2017-04-01

describe elements that promote satisfaction and dissatisfaction in the work of recyclable solid waste segregators and conduct a nursing action focused on these elements. qualitative research, convergent-care, conducted with members of the cooperative. Data production occurred during 2015 through participation observation, semi-structured interviews, and a convergence group. Analysis comprised the phases Apprehension, Synthesis, Theorization, and Transference. four categories emerged. They showed satisfaction and dissatisfaction related to identification with tasks and work content, material and personal gains obtained from solid waste segregation, prejudice, lack of appreciation, and difficulties in interpersonal relationships. This last item, due to its importance, received a nursing action. the study contributed to the advancement of knowledge and the association of possibilities between the research performance and nursing care for workers.

Preliminary analysis on the water quality index (WQI) of irradiated basic filter elements

NASA Astrophysics Data System (ADS)

Arif Abu Bakar, Asyraf; Muhamad Pauzi, Anas; Aziz Mohamed, Abdul; Syima Sharifuddin, Syazrin; Mohamad Idris, Faridah

2018-01-01

Simple water filtration system is needed in times of extreme floods. Clean water for sanitation at evacuation centres is essential and its production is possible by using the famous simple filtration system consisting of empty bottle and filter elements (sands, gravels, cotton/coffee filter). This research intends to study the effects of irradiated filter elements on the filtration effectiveness through experiments. The filter elements will be irradiated with gamma and neutron radiation using the facilities available at Malaysia Nuclear Agency. The filtration effectiveness is measured using the water quality index (WQI) that is developed in this study to reflect the quality of filtered water. The WQI of the filtered water using the system with irradiated filter elements is then compared with that of the system with non-irradiated filter elements. This preliminary analysis only focus on filtration element of silica sand. Results shows very nominal variation in in WQI after filtered by non-irradiated, gamma and neutron filter element (silica sand), where the hypothesis could not be affirmed.

PILOT PLANT TESTING OF ELEMENTAL MERCURY RE-EMISSION FROM WET SCRUBBERS

EPA Science Inventory

A pilot-scale wet lime/limestone flue gas desulfurization scrubber system was designed to conduct mercury emission control research. The first tests focused on investigating the phenomenon of Hgo re-emission from wet scrubbers with a specific objective of developing a Hgo re-emis...

Integrating Technology: The Principals' Role and Effect

ERIC Educational Resources Information Center

Machado, Lucas J.; Chung, Chia-Jung

2015-01-01

There are many factors that influence technology integration in the classroom such as teacher willingness, availability of hardware, and professional development of staff. Taking into account these elements, this paper describes research on technology integration with a focus on principals' attitudes. The role of the principal in classroom…

Murdering while Asleep: Clinical and Forensic Issues.

ERIC Educational Resources Information Center

Gilmore, John Vaughn

On the basis of the relevant research literature, this article discusses adult sleepwalking disorders, and focuses particularly on the documented cases of violence occurring during sleepwalking. Important diagnostic elements are reviewed, including family history, age of onset, gender, stages of sleep, impairments in memory and judgment, automatic…

Human factors evaluation of an in-vehicle active traffic and demand management (ATDM) system : final report.

DOT National Transportation Integrated Search

2016-02-15

This research study focused on the development and subsequent evaluation of an in-vehicle Active Traffic and Demand Management (ATDM) system deployed on Interstate 66 in Northern Virginia. The ATDM elements inside the vehicle allowed drivers to remai...

Research on design connotation of hair drier system

NASA Astrophysics Data System (ADS)

Li, Yongchuan; Wu, Qiong

2018-04-01

After the analysis and summary of the research on the design of hair drier system, the system design is focused on. Product system design is not only to study its entity, but also is recognized as the part, element and component with a systematic feature to deeply analyze the innovation way of product system design, which is taken as its concept to carry out the association analysis on the component elements of hair driers and the overall analysis and study on the system design process of hair dryers. The product life cycle is taken as the main goal, through system analysis, system synthesis and system optimization, to solve the problems of product design. It is of great practical significance.

WE-H-209-01: Advances in Ultrasound Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hynynen, K.

Focused ultrasound has been shown to be the only method that allows noninvasive thermal coagulation of tissues and recently this potential has been explored for image-guided drug delivery. In this presentation, the advances in ultrasound phased array technology for energy delivery, exposure monitoring and control will be discussed. Experimental results from novel multi-frequency transmit/receive arrays will be presented. In addition, the feasibility of fully electronically focused and steered high power arrays with many thousands of transducer elements will be discussed. Finally, some of the recent clinical and preclinical results for the treatment of brain disease will be reviewed. Learning Objectives:more » Introduce FUS therapy principles and modern techniques Discuss use of FUS for drug delivery Cover the technology required to deliver FUS and monitor therapy Present clinical examples of the uses of these techniques This research was supported by funding from The Canada Research Chair Program, Grants from CIHR and NIH (no. EB003268).; K. Hynynen, Canada Foundation for Innovation; Canadian Institutes of Health Research; Focused Ultrasound Surgery Foundation; Canada Research Chair Program; Natural Sciences and Engineering Research Council of Canada; Ontario Research Fund; National Institutes of Health; Canadian Cancer Society Research Institute; The Weston Brain Institute; Harmonic Medical; Focused Ultrasound Instruments.« less

WE-H-209-00: Carson/Zagzebski Distinguished Lectureship: Image Guided Ultrasound Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Focused ultrasound has been shown to be the only method that allows noninvasive thermal coagulation of tissues and recently this potential has been explored for image-guided drug delivery. In this presentation, the advances in ultrasound phased array technology for energy delivery, exposure monitoring and control will be discussed. Experimental results from novel multi-frequency transmit/receive arrays will be presented. In addition, the feasibility of fully electronically focused and steered high power arrays with many thousands of transducer elements will be discussed. Finally, some of the recent clinical and preclinical results for the treatment of brain disease will be reviewed. Learning Objectives:more » Introduce FUS therapy principles and modern techniques Discuss use of FUS for drug delivery Cover the technology required to deliver FUS and monitor therapy Present clinical examples of the uses of these techniques This research was supported by funding from The Canada Research Chair Program, Grants from CIHR and NIH (no. EB003268).; K. Hynynen, Canada Foundation for Innovation; Canadian Institutes of Health Research; Focused Ultrasound Surgery Foundation; Canada Research Chair Program; Natural Sciences and Engineering Research Council of Canada; Ontario Research Fund; National Institutes of Health; Canadian Cancer Society Research Institute; The Weston Brain Institute; Harmonic Medical; Focused Ultrasound Instruments.« less

Physical characteristics of welding arc ignition process

NASA Astrophysics Data System (ADS)

Shi, Linan; Song, Yonglun; Xiao, Tianjiao; Ran, Guowei

2012-07-01

The existing research of welding arc mainly focuses on the stable combustion state and the research on the mechanism of welding arc ignition process is quite lack. The tungsten inert gas(TIG) touch arc ignition process is observed via a high speed camera and the high time resolution spectral diagnosis system. The changing phenomenon of main ionized element provided the electrons in the arc ignition is found. The metallic element is the main contributor to provide the electrons at the beginning of the discharging, and then the excitated shielding gas element replaces the function of the metallic element. The electron density during the period of the arc ignition is calculated by the Stark-broadened lines of Hα. Through the discussion with the repeatability in relaxation phenomenon, the statistical regularity in the arc ignition process is analyzed. The similar rules as above are observed through the comparison with the laser-assisted arc ignition experiments and the metal inert gas(MIG) arc ignition experiments. This research is helpful to further understanding on the generation mechanism of welding arc ignition and also has a certain academic and practical significance on enriching the welding physical theoretical foundation and improving the precise monitoring on automatic arc welding process.

ULTRASONIC STUDIES OF THE FUNDAMENTAL MECHANISMS OF RECRYSTALLIZATION AND SINTERING OF METALS

DOE Office of Scientific and Technical Information (OSTI.GOV)

TURNER, JOSEPH A.

2005-11-30

The purpose of this project was to develop a fundamental understanding of the interaction of an ultrasonic wave with complex media, with specific emphases on recrystallization and sintering of metals. A combined analytical, numerical, and experimental research program was implemented. Theoretical models of elastic wave propagation through these complex materials were developed using stochastic wave field techniques. The numerical simulations focused on finite element wave propagation solutions through complex media. The experimental efforts were focused on corroboration of the models developed and on the development of new experimental techniques. The analytical and numerical research allows the experimental results to bemore » interpreted quantitatively.« less

Music therapy for mental disorder and mental health: the untapped potential of Indian classical music.

PubMed

Hegde, Shantala

2017-05-01

Music is a universal human trait. The healing power of music has been acknowledged in almost all traditions of music. Music therapy is moving from a social-science model focusing on overall health and well-being towards a neuroscience model focusing on specific elements of music and its effect on sensorimotor, language and cognitive functions. The handful of evidence-based music therapy studies on psychiatric conditions have shown promising results. Traditional music, such as Indian classical music, has only recently been evaluated in evidence-based research into music therapy. The need for systematic research in this area is underscored.

Thermal Effects Modeling Developed for Smart Structures

NASA Technical Reports Server (NTRS)

Lee, Ho-Jun

1998-01-01

Applying smart materials in aeropropulsion systems may improve the performance of aircraft engines through a variety of vibration, noise, and shape-control applications. To facilitate the experimental characterization of these smart structures, researchers have been focusing on developing analytical models to account for the coupled mechanical, electrical, and thermal response of these materials. One focus of current research efforts has been directed toward incorporating a comprehensive thermal analysis modeling capability. Typically, temperature affects the behavior of smart materials by three distinct mechanisms: Induction of thermal strains because of coefficient of thermal expansion mismatch 1. Pyroelectric effects on the piezoelectric elements; 2. Temperature-dependent changes in material properties; and 3. Previous analytical models only investigated the first two thermal effects mechanisms. However, since the material properties of piezoelectric materials generally vary greatly with temperature (see the graph), incorporating temperature-dependent material properties will significantly affect the structural deflections, sensory voltages, and stresses. Thus, the current analytical model captures thermal effects arising from all three mechanisms through thermopiezoelectric constitutive equations. These constitutive equations were incorporated into a layerwise laminate theory with the inherent capability to model both the active and sensory response of smart structures in thermal environments. Corresponding finite element equations were formulated and implemented for both the beam and plate elements to provide a comprehensive thermal effects modeling capability.

Decoding transcriptional enhancers: Evolving from annotation to functional interpretation

PubMed Central

Engel, Krysta L.; Mackiewicz, Mark; Hardigan, Andrew A.; Myers, Richard M.; Savic, Daniel

2016-01-01

Deciphering the intricate molecular processes that orchestrate the spatial and temporal regulation of genes has become an increasingly major focus of biological research. The differential expression of genes by diverse cell types with a common genome is a hallmark of complex cellular functions, as well as the basis for multicellular life. Importantly, a more coherent understanding of gene regulation is critical for defining developmental processes, evolutionary principles and disease etiologies. Here we present our current understanding of gene regulation by focusing on the role of enhancer elements in these complex processes. Although functional genomic methods have provided considerable advances to our understanding of gene regulation, these assays, which are usually performed on a genome-wide scale, typically provide correlative observations that lack functional interpretation. Recent innovations in genome editing technologies have placed gene regulatory studies at an exciting crossroads, as systematic, functional evaluation of enhancers and other transcriptional regulatory elements can now be performed in a coordinated, high-throughput manner across the entire genome. This review provides insights on transcriptional enhancer function, their role in development and disease, and catalogues experimental tools commonly used to study these elements. Additionally, we discuss the crucial role of novel techniques in deciphering the complex gene regulatory landscape and how these studies will shape future research. PMID:27224938

Decoding transcriptional enhancers: Evolving from annotation to functional interpretation.

PubMed

Engel, Krysta L; Mackiewicz, Mark; Hardigan, Andrew A; Myers, Richard M; Savic, Daniel

2016-09-01

Deciphering the intricate molecular processes that orchestrate the spatial and temporal regulation of genes has become an increasingly major focus of biological research. The differential expression of genes by diverse cell types with a common genome is a hallmark of complex cellular functions, as well as the basis for multicellular life. Importantly, a more coherent understanding of gene regulation is critical for defining developmental processes, evolutionary principles and disease etiologies. Here we present our current understanding of gene regulation by focusing on the role of enhancer elements in these complex processes. Although functional genomic methods have provided considerable advances to our understanding of gene regulation, these assays, which are usually performed on a genome-wide scale, typically provide correlative observations that lack functional interpretation. Recent innovations in genome editing technologies have placed gene regulatory studies at an exciting crossroads, as systematic, functional evaluation of enhancers and other transcriptional regulatory elements can now be performed in a coordinated, high-throughput manner across the entire genome. This review provides insights on transcriptional enhancer function, their role in development and disease, and catalogues experimental tools commonly used to study these elements. Additionally, we discuss the crucial role of novel techniques in deciphering the complex gene regulatory landscape and how these studies will shape future research. Copyright © 2016 Elsevier Ltd. All rights reserved.

Development of thermoplastic composite aircraft structures

NASA Technical Reports Server (NTRS)

Renieri, Michael P.; Burpo, Steven J.; Roundy, Lance M.; Todd, Stephanie A.; Kim, H. J.

1992-01-01

Efforts focused on the use of thermoplastic composite materials in the development of structural details associated with an advanced fighter fuselage section with applicability to transport design. In support of these designs, mechanics developments were conducted in two areas. First, a dissipative strain energy approach to material characterization and failure prediction, developed at the Naval Research Laboratory, was evaluated as a design/analysis tool. Second, a finite element formulation for thick composites was developed and incorporated into a lug analysis method which incorporates pin bending effects. Manufacturing concepts were developed for an upper fuel cell cover. A detailed trade study produced two promising concepts: fiber placement and single-step diaphragm forming. Based on the innovative design/manufacturing concepts for the fuselage section primary structure, elements were designed, fabricated, and structurally tested. These elements focused on key issues such as thick composite lugs and low cost forming of fastenerless, stiffener/moldine concepts. Manufacturing techniques included autoclave consolidation, single diaphragm consolidation (SDCC) and roll-forming.

Chemical Differentiation of Osseous, Dental, and Non-skeletal Materials in Forensic Anthropology using Elemental Analysis.

PubMed

Zimmerman, Heather A; Meizel-Lambert, Cayli J; Schultz, John J; Sigman, Michael E

2015-03-01

Forensic anthropologists are generally able to identify skeletal materials (bone and tooth) using gross anatomical features; however, highly fragmented or taphonomically altered materials may be problematic to identify. Several chemical analysis techniques have been shown to be reliable laboratory methods that can be used to determine if questionable fragments are osseous, dental, or non-skeletal in nature. The purpose of this review is to provide a detailed background of chemical analysis techniques focusing on elemental compositions that have been assessed for use in differentiating osseous, dental, and non-skeletal materials. More recently, chemical analysis studies have also focused on using the elemental composition of osseous/dental materials to evaluate species and provide individual discrimination, but have generally been successful only in small, closed groups, limiting their use forensically. Despite significant advances incorporating a variety of instruments, including handheld devices, further research is necessary to address issues in standardization, error rates, and sample size/diversity. Copyright © 2014 Forensic Science Society. Published by Elsevier Ireland Ltd. All rights reserved.

Children's Generalization of Strategies: An Historical Perspective on Transfer.

ERIC Educational Resources Information Center

Cox, Brian D.; And Others

As an aid to contemporary research, this paper examines historical ideas about young children's use of strategies for memorization and the transfer of such strategies to different contexts. Discussion focuses on (1) current approaches to inducing transfer of strategies; (2) Thorndike and Woodworth's concept of identical elements; (3) Gestalt…

Tribal Watershed Management: Culture, Science, Capacity, and Collaboration

ERIC Educational Resources Information Center

Cronin, Amanda; Ostergren, David M.

2007-01-01

This research focuses on two elements of contemporary American Indian natural resource management. First, the authors explore the capacity of tribes to manage natural resources, including the merging of traditional ecological knowledge (TEK) with Western science. Second, they analyze tribal management in the context of local and regional…

Emotional Readiness and Music Therapeutic Activities

ERIC Educational Resources Information Center

Drossinou-Korea, Maria; Fragkouli, Aspasia

2016-01-01

The purpose of this study is to understand the children's expression with verbal and nonverbal communication in the Autistic spectrum. We study the emotional readiness and the music therapeutic activities which exploit the elements of music. The method followed focused on the research field of special needs education. Assumptions on the parameters…

Understanding Teachers' Professional Cultures through Interview: A Constructivist Approach.

ERIC Educational Resources Information Center

Knight, Peter; Saunders, Murray

1999-01-01

Describes a research method used in a British project studying the professional culture of teachers, that of "dialogic interviews." The focus was on cultural constructs teachers used spontaneously, and the interviews were formed around elements of concept, discourse, general accounts of teaching, and site-specific accounts of teaching.…

Creating Research-Based Videos that Can Affect Behavior

ERIC Educational Resources Information Center

Cone, Joseph

2013-01-01

To engage recipients of Extension science-based video programming involves understanding what behaviors and decisions the recipients may be considering that can be affected by the programming. Such understanding may be developed through interviews, focus groups, and surveys, which should provide guidance for elements of the style and content of…

Reflections on Puccini's "La Boheme": Investigating a Model for Listening

ERIC Educational Resources Information Center

Madsen, Clifford K.; Geringer, John M.

2008-01-01

A continuing line of research indicates that focus of attention is perhaps the most important attribute of actively participating in meaningful music listening and a model accounting for these findings has been developed. Music teachers are especially concerned with meaningful listening when having students discern important elements or attributes…

Development of concrete mix proportions for minimizing/eliminating shrinkage cracks in slabs and high performance grouts : final report.

DOT National Transportation Integrated Search

2017-02-01

The two focus areas of this research address longstanding problems of (1) cracking of concrete slabs due to creep and shrinkage and (2) high performance compositions for grouting and joining precast concrete structural elements. Cracking of bridge de...

Creating Shared Value through Service-Learning in Management Education

ERIC Educational Resources Information Center

Nikolova, Natalia; Andersen, Lisa

2017-01-01

Service-learning has gained strong interest among educators as a model of experiential education through community engagement. Its potential to contribute to multiple stakeholders, including students, community partners, faculty, and university, is well recognized. While research has focused on elements of this teaching model that contribute to…

Contextual Antecedents of Identity Development in an Adventure Recreation Setting: A Qualitative Inquiry

ERIC Educational Resources Information Center

Duerden, Mat D.; Taniguchi, Stacy; Widmer, Mark

2011-01-01

Researchers have focused primarily on the processes and outcomes associated with adolescent identity development. Less is known about the interpersonal and contextual elements that facilitate the identity formation process. Therefore, the purpose of this study was to qualitatively investigate a structured recreation context that had been…

Vocational Education and Learning in Higher Education

ERIC Educational Resources Information Center

de Carvalho, Cynthia Paes

2012-01-01

This article discusses the relationship of students with learning and the university in the context of current challenges to vocational education and economic development. Inspired by the research of Pierre Bourdieu, this case study focuses on the relationship of students to learning and the university in Brazil. The survey gathered elements that…

Reconceptualizing the motive/environment link in recreation choice behavior

Treesearch

Richard Schreyer; Richard C. Knopf; Daniel R. Williams

1985-01-01

Effective inventory, management, and planning for recreation resources depend upon knowing why persons choose certain environments to attain specific goals, and what elements in those environments facilitate goal-attainment. Research focused on relating motives for participation to specific components in the environment has had only limited success. This paper proposes...

Behavioral Health Program Element

NASA Technical Reports Server (NTRS)

Leveton, Lauren B.

2006-01-01

The project goal is to develop behavioral health prevention and maintenance system for continued crew health, safety, and performance for exploration missions. The basic scope includes a) Operationally-relevant research related to clinical cognitive and behavioral health of crewmembers; b) Ground-based studies using analog environments (Antarctic, NEEMO, simulations, and other testbeds; c) ISS studies (ISSMP) focusing on operational issues related to behavioral health outcomes and standards; d) Technology development activities for monitoring and diagnostic tools; and e) Cross-disciplinary research (e.g., human factors and habitability research, skeletal muscle, radiation).

Health services research.

PubMed

Litwin, Mark S

2008-07-01

The discipline of health services research, often loosely referred to as outcomes research, is primarily focused on the study of access to care, costs of care, and quality of care. Access to care includes everything that facilitates or impedes the actual use of medical services. Costs of care include financial and nonfinancial payments by insurers and individuals for medical services as well as the opportunity cost of lost wages and the societal cost of decreased productivity. Quality of care encompasses elements of the structure, process, and outcome of medical care.

Common data elements for secondary use of electronic health record data for clinical trial execution and serious adverse event reporting.

PubMed

Bruland, Philipp; McGilchrist, Mark; Zapletal, Eric; Acosta, Dionisio; Proeve, Johann; Askin, Scott; Ganslandt, Thomas; Doods, Justin; Dugas, Martin

2016-11-22

Data capture is one of the most expensive phases during the conduct of a clinical trial and the increasing use of electronic health records (EHR) offers significant savings to clinical research. To facilitate these secondary uses of routinely collected patient data, it is beneficial to know what data elements are captured in clinical trials. Therefore our aim here is to determine the most commonly used data elements in clinical trials and their availability in hospital EHR systems. Case report forms for 23 clinical trials in differing disease areas were analyzed. Through an iterative and consensus-based process of medical informatics professionals from academia and trial experts from the European pharmaceutical industry, data elements were compiled for all disease areas and with special focus on the reporting of adverse events. Afterwards, data elements were identified and statistics acquired from hospital sites providing data to the EHR4CR project. The analysis identified 133 unique data elements. Fifty elements were congruent with a published data inventory for patient recruitment and 83 new elements were identified for clinical trial execution, including adverse event reporting. Demographic and laboratory elements lead the list of available elements in hospitals EHR systems. For the reporting of serious adverse events only very few elements could be identified in the patient records. Common data elements in clinical trials have been identified and their availability in hospital systems elucidated. Several elements, often those related to reimbursement, are frequently available whereas more specialized elements are ranked at the bottom of the data inventory list. Hospitals that want to obtain the benefits of reusing data for research from their EHR are now able to prioritize their efforts based on this common data element list.

A Status of the Advanced Space Transportation Program from Planning to Action

NASA Technical Reports Server (NTRS)

Lyles, Garry; Griner, Carolyn

1998-01-01

A Technology Plan for Enabling Commercial Space Business was presented at the 48th International Astronautical Congress in Turin, Italy. This paper presents a status of the program's accomplishments. Technology demonstrations have progressed in each of the four elements of the program; (1) Low Cost Technology, (2) Advanced Reusable Technology, (3) Space Transfer Technology and (4) Space Transportation Research. The Low Cost Technology program element is primarily focused at reducing development and acquisition costs of aerospace hardware using a "design to cost" philosophy with robust margins, adapting commercial manufacturing processes and commercial off-the-shelf hardware. The attributes of this philosophy for small payload launch are being demonstrated at the component, sub-system, and system level. The X-34 "Fastrac" engine has progressed through major component and subsystem demonstrations. A propulsion system test bed has been implemented for system-level demonstration of component and subsystem technologies; including propellant tankage and feedlines, controls, pressurization, and engine systems. Low cost turbopump designs, commercial valves and a controller are demonstrating the potential for a ten-fold reduction in engine and propulsion system costs. The Advanced Reusable Technology program element is focused on increasing life through high strength-to-weight structures and propulsion components, highly integrated propellant tanks, automated checkout and health management and increased propulsion system performance. The validation of rocket based combined cycle (RBCC) propulsion is pro,-,ressing through component and subsystem testing. RBCC propulsion has the potential to provide performance margin over an all rocket system that could result in lower gross liftoff weight, a lower propellant mass fraction or a higher payload mass fraction. The Space Transfer Technology element of the program is pursuing technology that can improve performance and dramatically reduce the propellant and structural mass of orbit transfer and deep space systems. Flight demonstration of ion propulsion is progressing towards launch. Ion propulsion is the primary propulsion for Deep Space 1; a flyby of comet West-kohoutek-lkemura and asteroid 3352 McAuliffe. Testing of critical solar-thermal propulsion subsystems have been accomplished and planning is continuing for the flight demonstration of an electrodynamic tether orbit transfer system. The forth and final element of the program, Space Transportation Research, has progressed in several areas of propulsion research. This element of the program is focused at long-term (25 years) breakthrough concepts that could bring launch costs to a factor of one hundred below today's cost or dramatically expand planetary travel and enable interstellar travel.

What Do We Mean by 'Community Resilience'? A Systematic Literature Review of How It Is Defined in the Literature.

PubMed

Patel, Sonny S; Rogers, M Brooke; Amlôt, Richard; Rubin, G James

2017-02-01

Government, industry and charitable organisations have an increasing focus on programs intended to support community resilience to disasters. But has consensus been reached as to what defines 'community resilience' and what its core characteristics are? We undertook a systematic literature review of definitions of community resilience related to disasters. We conducted an inductive thematic analysis of the definitions and descriptions that we identified, in order to determine the proposed characteristics of community resilience prior to, during and after a disaster. We identified 80 relevant papers. There was no evidence of a common, agreed definition of community resilience. In spite of this, evidence was found of nine core elements of community resilience that were common among the definitions. The core elements were: local knowledge, community networks and relationships, communication, health, governance and leadership, resources, economic investment, preparedness, and mental outlook. Within these core elements, we identified 19 sub-elements linked to community resilience. Our findings show that community resilience remains an amorphous concept that is understood and applied differently by different research groups. Yet in spite of the differences in conception and application, there are well-understood elements that are widely proposed as important for a resilient community. A focus on these individual elements may be more productive than attempting to define and study community resilience as a distinct concept.

What Do We Mean by 'Community Resilience'? A Systematic Literature Review of How It Is Defined in the Literature

PubMed Central

Patel, Sonny S.; Rogers, M. Brooke; Amlôt, Richard; Rubin, G. James

2017-01-01

Background: Government, industry and charitable organisations have an increasing focus on programs intended to support community resilience to disasters. But has consensus been reached as to what defines 'community resilience' and what its core characteristics are? Methods: We undertook a systematic literature review of definitions of community resilience related to disasters. We conducted an inductive thematic analysis of the definitions and descriptions that we identified, in order to determine the proposed characteristics of community resilience prior to, during and after a disaster. Results: We identified 80 relevant papers. There was no evidence of a common, agreed definition of community resilience. In spite of this, evidence was found of nine core elements of community resilience that were common among the definitions. The core elements were: local knowledge, community networks and relationships, communication, health, governance and leadership, resources, economic investment, preparedness, and mental outlook. Within these core elements, we identified 19 sub-elements linked to community resilience. Conclusion: Our findings show that community resilience remains an amorphous concept that is understood and applied differently by different research groups. Yet in spite of the differences in conception and application, there are well-understood elements that are widely proposed as important for a resilient community. A focus on these individual elements may be more productive than attempting to define and study community resilience as a distinct concept. PMID:29188132

Workplace harassment: a test of definitional criteria derived from an analysis of research definitions and Canadian social definitions.

PubMed

Claybourn, Marvin; Spinner, Barry; Malcom, Kathryn

2014-01-01

Public awareness of the occurrence and effects of workplace harassment continues to grow. However, despite increasing awareness, ambiguity remains about how harassment is defined and, consequently, how to determine whether a questionable situation should be judged as harassment. For this research we reviewed definitions of workplace harassment and identified four elements that were frequently included as criteria for making judgments of whether harassment had occurred (i.e., repetition, intent, perceived intent, consequences). In two separate studies, fictional scenarios were used to evaluate the extent to which participants' judgments about harassment were affected by the presence or absence of the four elements. Ratings of the scenarios provided by student participants (study one; N=160) and a convenience sample of community participants (study two; N=292) with varying levels of work experience and diverse professional backgrounds were analysed. According to our results the four elements significantly influenced participants' judgments of harassment. The intent of the harasser had the strongest and most consistent effect on harassment judgements and whether the behaviour was repeated had the weakest and least consistent effect. In addition to the unique effects of the individual elements, significant interactions between the elements emerged and suggest that harassment judgements depend on the interplay of a variety of factors. Though the results of these studies add to the growing body of research that focuses on defining workplace harassment, they also highlight the need for additional research in the area. Copyright © 2014 Elsevier Ltd. All rights reserved.

Subtask 4.8 - Fate and Control of Mercury and Trace Elements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pavlish, John; Lentz, Nicholas; Martin, Christopher

2011-12-31

The Center for Air Toxic Metals® (CATM®) Program at the Energy & Environmental Research Center (EERC) continues to focus on vital basic and applied research related to the fate, behavior, measurement, and control of trace metals, especially mercury, and the impact that these trace metals have on human health and the environment. For years, the CATM Program has maintained an international perspective, performing research and providing results that apply to both domestic and international audiences, with reports distributed in the United States and abroad. In addition to trace metals, CATM’s research focuses on other related emissions and issues that impactmore » trace metal releases to the environment, such as SO x, NO x, CO 2, ash, and wastewater streams. Of paramount interest and focus has been performing research that continues to enable the power and industrial sectors to operate in an environmentally responsible manner to meet regulatory standards. The research funded by the U.S. Department of Energy’s (DOE’s) National Energy Technology Laboratory (NETL) through CATM has allowed significant strides to be made to gain a better understanding of trace metals and other emissions, improve sampling and measurement techniques, fill data gaps, address emerging technical issues, and develop/test control technologies that allow industry to cost-effectively meet regulatory standards. The DOE NETL–CATM research specifically focused on the fate and control of mercury and trace elements in power systems that use CO 2 control technologies, such as oxycombustion and gasification systems, which are expected to be among those technologies that will be used to address climate change issues. In addition, research addressed data gaps for systems that use conventional and multipollutant control technologies, such as electrostatic precipitators, selective catalytic reduction units, flue gas desulfurization systems, and flue gas-conditioning methods, to understand mercury interactions, develop better control strategies and, in some cases, prevent mercury from being reemitted. This research also addressed stakeholder concerns and questions related to sampling and analytical methods for mercury, especially for continuous mercury monitors and sorbent trap methods for future compliance. Advancements were made toward the development of a much simpler dry-based method for measurement of halogens and trace metals. Finally, this research resulted in significant outcomes related to mercury and selenium concentrations in freshwater fish and how it is associated with other elements, thereby potentially impacting health; this has greatly enhanced the understanding of the second-order mechanism of mercury toxicity. The outcomes of this research have been shared with stakeholders in various domestic and international forums, working groups, conferences, educational settings, and published documents, with information available and accessible to those most impacted or interested in timely and current results on toxic metals. This subtask was funded through the EERC–DOE Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE-FC26-08NT43291.« less

A tale of oblivion: Ida Noddack and the ‘universal abundance’ of matter

PubMed Central

Santos, Gildo Magalhães

2014-01-01

Ida Noddack was a German chemist who in 1925, with her husband Walter Noddack, discovered element 75 (rhenium) and possibly element 43 (technetium). She is also known to have anticipated, by nine years, the possibility of nuclear fission. This article focuses on Ida's hypothesis that all elements are present in any mineral. Ida related the relative abundance of the elements in the Universe to hypothetical properties of the atomic nuclei. This allowed her to speculate about a different Periodic Table in which isotopes might be the cause of unexpected features of periodicity. Ida Noddack faced many professional obstacles because of her scientific nonconformity and gender, the resentment of physicists against intrusion in their field, and the overall difficulty of research under and after the Nazi regime.

Necessity for Industry-Academic Economic Geology Collaborations for Energy Critical Minerals Research and Development

NASA Astrophysics Data System (ADS)

Hitzman, M.

2012-12-01

Economic geology is a highly interdisciplinary field utilizing a diverse set of petrologic, geochemical, geophysical, and tectonic data for improved scientific understanding of element migration and concentration in the crust (ore formation). A number of elements that were once laboratory curiosities now figure prominently in new energy technologies (e.g. wind turbines, solar energy collectors). If widely deployed, such technologies have the capacity to transform the way we produce, transmit, store, and conserve energy. To meet domestic and worldwide renewable energy needs these systems must be scaled from laboratory, to demonstration, to widespread deployment. Such technologies are materials intensive. If widely deployed, the elements required by these technologies will be needed in significant quantities and shortage of these "energy critical elements" could significantly inhibit the adoption of otherwise game changing energy technologies. It is imperative to better understand the geology, metallurgy, and mining engineering of critical mineral deposits if we are to sustainably develop these new technologies. There is currently no consensus among federal and state agencies, the national and international mining industry, the public, and the U.S. academic community regarding the importance of economic geology to secure sufficient energy critical elements to undertake large-scale renewable energy development. Available federal funding for critical elements focuses on downstream areas such as metallurgy, substitutions, and recycling rather than primary deposits. Undertaking the required research to discover and mine critical element deposits in an environmentally friendly manner will require significant partnering with industry due to the current lack of federal research support.

Intelligent Elements for the ISHM Testbed and Prototypes (ITP) Project

NASA Technical Reports Server (NTRS)

Maul, William A.; Park, Han; Schwabacher, Mark; Watson, Michael; Mackey, Ryan; Fijany, Amir; Trevino, Luis; Weir, John

2005-01-01

Deep-space manned missions will require advanced automated health assessment capabilities. Requirements such as in-space assembly, long dormant periods and limited accessibility during flight, present significant challenges that should be addressed through Integrated System Health Management (ISHM). The ISHM approach will provide safety and reliability coverage for a complete system over its entire life cycle by determining and integrating health status and performance information from the subsystem and component levels. This paper will focus on the potential advanced diagnostic elements that will provide intelligent assessment of the subsystem health and the planned implementation of these elements in the ISHM Testbed and Prototypes (ITP) Project under the NASA Exploration Systems Research and Technology program.

Annual report for 2004 wild horse research and field activities

USGS Publications Warehouse

Ransom, Jason; Singer, Francis J.; Zeigenfuss, Linda; Coates-Markle, Linda

2005-01-01

The Bureau of Land Management (BLM) and U.S. Geological Survey-Biological Resources Discipline (USGS/BRD) continued wild horse research in 2004, investigating the strategic research elements of fertility control and population estimation. Fertility control research was focused on the individual-based porcine zonae pellucid (PZP) field trials at the Pryor Mountain Wild Horse Range (WHR), Little Rock Cliffs WHR, and McCullough Peaks Wild Horse Management Area (WHMA). Aerial population estimation research was conducted on a number of western wild horse herds to test different survey techniques as applied to various habitat types and population sizes.

COST action TD1407: network on technology-critical elements (NOTICE)--from environmental processes to human health threats.

PubMed

Cobelo-García, A; Filella, M; Croot, P; Frazzoli, C; Du Laing, G; Ospina-Alvarez, N; Rauch, S; Salaun, P; Schäfer, J; Zimmermann, S

2015-10-01

The current socio-economic, environmental and public health challenges that countries are facing clearly need common-defined strategies to inform and support our transition to a sustainable economy. Here, the technology-critical elements (which includes Ga, Ge, In, Te, Nb, Ta, Tl, the Platinum Group Elements and most of the rare-earth elements) are of great relevance in the development of emerging key technologies-including renewable energy, energy efficiency, electronics or the aerospace industry. In this context, the increasing use of technology-critical elements (TCEs) and associated environmental impacts (from mining to end-of-life waste products) is not restricted to a national level but covers most likely a global scale. Accordingly, the European COST Action TD1407: Network on Technology-Critical Elements (NOTICE)-from environmental processes to human health threats, has an overall objective for creating a network of scientists and practitioners interested in TCEs, from the evaluation of their environmental processes to understanding potential human health threats, with the aim of defining the current state of knowledge and gaps, proposing priority research lines/activities and acting as a platform for new collaborations and joint research projects. The Action is focused on three major scientific areas: (i) analytical chemistry, (ii) environmental biogeochemistry and (iii) human exposure and (eco)-toxicology.

A survey on the measure of combat readiness

NASA Astrophysics Data System (ADS)

Wen, Kwong Fook; Nor, Norazman Mohamad; Soon, Lee Lai

2014-09-01

Measuring the combat readiness in military forces involves the measures of tangible and intangible elements of combat power. Though these measures are applicable, the mathematical models and formulae used focus mainly on either the tangible or the intangible elements. In this paper, a review is done to highlight the research gap in the formulation of a mathematical model that incorporates tangible elements with intangible elements to measure the combat readiness of a military force. It highlights the missing link between the tangible and intangible elements of combat power. To bridge the gap and missing link, a mathematical model could be formulated that measures both the tangible and intangible aspects of combat readiness by establishing the relationship between the causal (tangible and intangible) elements and its effects on the measure of combat readiness. The model uses multiple regression analysis as well as mathematical modeling and simulation which digest the capability component reflecting its assets and resources, the morale component reflecting human needs, and the quality of life component reflecting soldiers' state of satisfaction in life. The results of the review provide a mean to bridge the research gap through the formulation of a mathematical model that shows the total measure of a military force's combat readiness. The results also significantly identify parameters for each of the variables and factors in the model.

Adhesives: Test Method, Group Assignment, and Categorization Guide for High-Loading-Rate Applications

DTIC Science & Technology

2014-06-01

CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Robert Jensen, Daniel DeSchepper, David Flanagan, Wendy Kosik...lessons learned , or research purposes; these are generally long-term records.” Records will be kept in physical laboratory notebooks and digitally... learned ” could have potential value in addressing future research focus. Testing progression protocols beyond the third tier are intended for ARL

Curved Thermopiezoelectric Shell Structures Modeled by Finite Element Analysis

NASA Technical Reports Server (NTRS)

Lee, Ho-Jun

2000-01-01

"Smart" structures composed of piezoelectric materials may significantly improve the performance of aeropropulsion systems through a variety of vibration, noise, and shape-control applications. The development of analytical models for piezoelectric smart structures is an ongoing, in-house activity at the NASA Glenn Research Center at Lewis Field focused toward the experimental characterization of these materials. Research efforts have been directed toward developing analytical models that account for the coupled mechanical, electrical, and thermal response of piezoelectric composite materials. Current work revolves around implementing thermal effects into a curvilinear-shell finite element code. This enhances capabilities to analyze curved structures and to account for coupling effects arising from thermal effects and the curved geometry. The current analytical model implements a unique mixed multi-field laminate theory to improve computational efficiency without sacrificing accuracy. The mechanics can model both the sensory and active behavior of piezoelectric composite shell structures. Finite element equations are being implemented for an eight-node curvilinear shell element, and numerical studies are being conducted to demonstrate capabilities to model the response of curved piezoelectric composite structures (see the figure).

Research on evaluation techniques for immersive multimedia

NASA Astrophysics Data System (ADS)

Hashim, Aslinda M.; Romli, Fakaruddin Fahmi; Zainal Osman, Zosipha

2013-03-01

Nowadays Immersive Multimedia covers most usage in tremendous ways, such as healthcare/surgery, military, architecture, art, entertainment, education, business, media, sport, rehabilitation/treatment and training areas. Moreover, the significant of Immersive Multimedia to directly meet the end-users, clients and customers needs for a diversity of feature and purpose is the assembly of multiple elements that drive effective Immersive Multimedia system design, so evaluation techniques is crucial for Immersive Multimedia environments. A brief general idea of virtual environment (VE) context and `realism' concept that formulate the Immersive Multimedia environments is then provided. This is followed by a concise summary of the elements of VE assessment technique that is applied in Immersive Multimedia system design, which outlines the classification space for Immersive Multimedia environments evaluation techniques and gives an overview of the types of results reported. A particular focus is placed on the implications of the Immersive Multimedia environments evaluation techniques in relation to the elements of VE assessment technique, which is the primary purpose of producing this research. The paper will then conclude with an extensive overview of the recommendations emanating from the research.

Focusing light through random scattering media by four-element division algorithm

NASA Astrophysics Data System (ADS)

Fang, Longjie; Zhang, Xicheng; Zuo, Haoyi; Pang, Lin

2018-01-01

The focusing of light through random scattering materials using wavefront shaping is studied in detail. We propose a newfangled approach namely four-element division algorithm to improve the average convergence rate and signal-to-noise ratio of focusing. Using 4096 independently controlled segments of light, the intensity at the target is 72 times enhanced over the original intensity at the same position. The four-element division algorithm and existing phase control algorithms of focusing through scattering media are compared by both of the numerical simulation and the experiment. It is found that four-element division algorithm is particularly advantageous to improve the average convergence rate of focusing.

Spent nuclear fuel assembly inspection using neutron computed tomography

NASA Astrophysics Data System (ADS)

Pope, Chad Lee

The research presented here focuses on spent nuclear fuel assembly inspection using neutron computed tomography. Experimental measurements involving neutron beam transmission through a spent nuclear fuel assembly serve as benchmark measurements for an MCNP simulation model. Comparison of measured results to simulation results shows good agreement. Generation of tomography images from MCNP tally results was accomplished using adapted versions of built in MATLAB algorithms. Multiple fuel assembly models were examined to provide a broad set of conclusions. Tomography images revealing assembly geometric information including the fuel element lattice structure and missing elements can be obtained using high energy neutrons. A projection difference technique was developed which reveals the substitution of unirradiated fuel elements for irradiated fuel elements, using high energy neutrons. More subtle material differences such as altering the burnup of individual elements can be identified with lower energy neutrons provided the scattered neutron contribution to the image is limited. The research results show that neutron computed tomography can be used to inspect spent nuclear fuel assemblies for the purpose of identifying anomalies such as missing elements or substituted elements. The ability to identify anomalies in spent fuel assemblies can be used to deter diversion of material by increasing the risk of early detection as well as improve reprocessing facility operations by confirming the spent fuel configuration is as expected or allowing segregation if anomalies are detected.

Perceived Leadership Soft Skills and Trustworthiness of Deans in Three Malaysian Public Universities

ERIC Educational Resources Information Center

Tang, Keow Ngang; Ariratana, Wallapha; Treputharan, Saowanee

2013-01-01

Soft skills comprised both rational and emotional elements, becoming a new focus on leadership, as behavior displayed during interaction with other individuals will affect effective interaction outcomes. This study aimed to examine the leadership soft skills of deans in public universities of Malaysia. This survey designed research was performed…

What Counts As Mathematics?: Technologies of Power in Adult and Vocational Education. Mathematics Education Library.

ERIC Educational Resources Information Center

Fitzsimons, Gail E.

This book, aimed at mathematics and vocational educators and researchers, analyzes the historical, sociological, and practical elements of mathematics within vocational education against the emerging impact of technology. Focus is on the current situation of mathematics within Australian vocational and technical education and how that might be…

A New Approach toward Digital Storytelling: An Activity Focused on Writing Self-Efficacy in a Virtual Learning Environment

ERIC Educational Resources Information Center

Xu, Yan; Park, Hyungsung; Baek, Youngkyun

2011-01-01

Recently, computer technology and multimedia elements have been developed and integrated into teaching and learning. Entertainment-based learning environments can make learning contents more attractive, and thus can lead to learners' active participation and facilitate learning. A significant amount of research examines using video editing…

The Creativity of Korean Leaders and Its Implications for Creativity Education

ERIC Educational Resources Information Center

Cho, Younsoon; Chung, Hyeyoung; Choi, Kyoulee; Suh, Yewon; Seo, Choyoung

2011-01-01

This research explores the promoting elements of Korean leaders' creative achievements, and provides implications for creativity education which are suitable in the Korean sociocultural context. In-depth interviews focusing on their school life and personal growth were held with twelve leaders, four each in the fields of science, humanities, and…

Critical Elements of Student Assistance Programs: A Qualitative Study

ERIC Educational Resources Information Center

Torres-Rodriguez, Leslie; Beyard, Karen; Goldstein, Marc B.

2010-01-01

Student assistance programs (SAPs) are one approach for using teams to respond to student needs, but there is little research on SAP implementation and whether SAPs function as intended. The authors present findings from a study of two SAPs that use a model developed by Connecticut's Governor's Prevention Partnership. The study focused on…

Fatima's Rules and Other Elements of an Unintended Chemistry Curriculum.

ERIC Educational Resources Information Center

Larson, Jane O.

Descriptions of curriculum often divide it into components entitled intended, implemented, and learned. Each domain intersects with the next to form a sequence of events in which curriculum, teacher, and students are major participants in the process of curriculum modulation. The focus of the research reported in this paper was to study the…

Exploring the Experiences of Female Emerging Adult Mentors: Building a Conceptual Model

ERIC Educational Resources Information Center

McGill, Julianne; Adler-Baeder, Francesca; Sollie, Donna L.; Kerpelman, Jennifer L.

2015-01-01

While mentoring programs are prevalent, limited research focused on the mentors' experiences exist, particularly during critical periods of development. Using a qualitative, grounded theory approach, this study explores the elements of the mentoring experience for a cohort of late adolescent/emerging adult women in a long-term program. Outcomes…

Embodiment during Reading: Simulating a Story Character's Linguistic Actions

ERIC Educational Resources Information Center

Gunraj, Danielle N.; Drumm-Hewitt, April M.; Klin, Celia M.

2014-01-01

According to theories of embodied cognition, a critical element in language comprehension is the formation of sensorimotor simulations of the actions and events described in a text. Although much of the embodied cognition research has focused on simulations of motor actions, we ask whether readers form simulations of story characters' linguistic…

"English?--Oh, It's Just Work!": A Study of BELF Users' Perceptions

ERIC Educational Resources Information Center

Kankaanranta, Anne; Louhiala-Salminen, Leena

2010-01-01

With the increasing number of business professionals operating globally, knowledge of successful English lingua franca in business contexts (BELF) has become an important element in overall business know-how. Here, we report on a research project focusing on everyday BELF communication at work. It consists of an extensive survey, and related…

Is Educational Achievement a Turning Point for Incarcerated Delinquents across Race and Sex?

ERIC Educational Resources Information Center

Blomberg, Thomas G.; Bales, William D.; Piquero, Alex R.

2012-01-01

Research has linked the role of education to delinquency, but much of the focus has been on general population samples and with little attention to demographic differences. Employing a cumulative disadvantage framework that integrates elements of informal social control and labeling theories, this article examines whether academic achievement…

Securing Our Dance Heritage: Issues in the Documentation and Preservation of Dance.

ERIC Educational Resources Information Center

Johnson, Catherine J.; Snyder, Allegra Fuller

The great research collections of the United States have resulted, in part, from a long and productive collaboration among scholars, librarians, and archivists. This booklet focuses on the documentation of, access to, and preservation of dance heritage. It discusses the cultural and intellectual value of dance and articulates what elements of…

Focused Group Interviews as an Innovative Quanti-Qualitative Methodology (QQM): Integrating Quantitative Elements into a Qualitative Methodology

ERIC Educational Resources Information Center

Grim, Brian J.; Harmon, Alison H.; Gromis, Judy C.

2006-01-01

There is a sharp divide between quantitative and qualitative methodologies in the social sciences. We investigate an innovative way to bridge this gap that incorporates quantitative techniques into a qualitative method, the "quanti-qualitative method" (QQM). Specifically, our research utilized small survey questionnaires and experiment-like…

Professional Development through Lesson Study: Teaching the Derivative Using Geogebra

ERIC Educational Resources Information Center

Verhoef, Nellie C.; Coenders, Fer; Pieters, Jules M.; van Smaalen, Daan; Tall, David O.

2015-01-01

This study focuses on mathematics teachers' professional development through elements of Japanese lesson study. The teachers designed a research lesson with regard to sense-making of the derivative using the integration of GeoGebra. In the second year of the four-year lesson study project, seven secondary school teachers--from different Dutch…

Visioning as an Integral Element to Understanding Indigenous Learners' Transition to University

ERIC Educational Resources Information Center

Parent, Amy

2017-01-01

This article focuses on high school to university transitions for Indigenous youth at universities in British Columbia, Canada. The study is premised on an Indigenous research design, which utilizes the concept of visioning and a storywork methodology (Archibald, 2008). The results challenge existing institutional and psychological approaches to…

Use Grants, Not Loans, for Getting Low-Income Hispanics to College

ERIC Educational Resources Information Center

Adam, Michelle

2007-01-01

The Educational Policy Institute (EPI) is an international think tank launched in 2002 "to expand educational opportunity for low-income and other historically underrepresented students through high-level research and analysis." Financial aid to students is a major element in expanding opportunity and thus is a major focus of EPI. Alex…

Effects of Teaching Strategies in Annotated Bibliography Writing

ERIC Educational Resources Information Center

Tan-de Ramos, Jennifer

2015-01-01

The study examines the effect of teaching strategies to improved writing of students in the tertiary level. Specifically, three teaching approaches--the use of modelling, grammar-based, and information element-focused--were tested on their effect on the writing of annotated bibliography in three research classes at a university in Manila.…

Cross-Cultural Trust Networks and Advancing Education Equity in Place-Based Partnerships

ERIC Educational Resources Information Center

Banks, Amber Joy

2017-01-01

Research suggests that trust can be a foundational element for the success and sustainability of multi-organizational partnerships focused on advancing education equity in a particular neighborhood or region. As these place-based strategies gain popularity in the U.S., collaborators are increasingly required to navigate relationships where racial…

An overview of the NASA textile composites program

NASA Technical Reports Server (NTRS)

Dexter, H. Benson

1993-01-01

The NASA Langley Research Center is conducting and sponsoring research to explore the benefits of textile reinforced composites for civil transport aircraft primary structures. The objective of this program is to develop and demonstrate the potential of affordable textile reinforced composite materials to meet design properties and damage tolerance requirements of advanced aircraft structures. In addition to in-house research, the program includes major participation by the aircraft industry and aerospace textile companies. The major program elements include development of textile preforms, processing science, mechanics of materials, experimental characterization of materials, and development and evaluation of textile reinforced composite structural elements and subcomponents. The NASA Langley in-house research is focused on science-based understanding of resin transfer molding (RTM), development of powder-coated towpreg processes, analysis methodology, and development of a performance database on textile reinforced composites. The focus of the textile industry participation is on development of multidirectional, damage-tolerant preforms, and the aircraft industry participation is in the areas of innovative design concepts, cost-effective fabrication, and testing of textile reinforced composite structural elements and subcomponents. Textile processes such as 3-D weaving, 2-D and 3-D braiding, and knitting/stitching are being compared with conventional laminated tape processes for improved damage tolerance. Through-the-thickness reinforcements offer significant damage tolerance improvements. However, these gains must be weighed against potential loss in in-plane properties such as strength and stiffness. Analytical trade studies are underway to establish design guidelines for the application of textile material forms to meet specific loading requirements. Fabrication and testing of large structural components are required to establish the full potential of textile reinforced composite materials. The goals of the NASA Langley-sponsored research program are to demonstrate technology readiness with subscale composite components by 1995 and to verify the performance of full-scale composite primary aircraft structural components by 1997. The status of textile reinforced composite structural elements under development by Boeing, Douglas, Lockheed, and Grumman are presented. Included are braided frames and woven/stitched wing and fuselage panels.

Sports participation and alcohol use among adolescents: the impact of measurement and other research design elements.

PubMed

Mays, Darren; Gatti, Margaret E; Thompson, Nancy J

2011-06-01

Sports participation, while offering numerous developmental benefits for adolescents, has been associated with alcohol use in prior research. However, the relationship between sports participation and alcohol use among adolescents remains unclear, particularly how research design elements impact evidence of this relationship. We reviewed the evidence regarding sports participation and alcohol use among adolescents, with a focus on examining the potential impact of research design elements on this evidence. Studies were assessed for eligibility and coded based on research design elements including: study design, sampling method, sample size, and measures of sports participation and alcohol use. Fifty-four studies were assessed for eligibility, 29 of which were included in the review. Nearly two-thirds used a cross-sectional design and a random sampling method, with sample sizes ranging from 178 to 50,168 adolescents (Median = 1,769). Sixteen studies used a categorical measure of sports participation, while 7 applied an index-type measure and 6 employed some other measure of sports participation. Most studies assessed alcohol-related behaviors (n = 18) through categorical measures, while only 6 applied frequency only measures of alcohol use, 1 study applied quantity only measures, and 3 studies used quantity and frequency measures. Sports participation has been defined and measured in various ways, most of which do not differentiate between interscholastic and community-based contexts, confounding this relationship. Stronger measures of both sports participation and alcohol use need to be applied in future studies to advance our understanding of this relationship among youths.

Online Classroom Research and Analysis Activities Using MARGINS-Related Resources for the Izu-Bonin-Mariana Subduction System

NASA Astrophysics Data System (ADS)

Ryan, J. G.

2007-12-01

Students today have online access to nearly unlimited scientific information in an entirely unfiltered state. As such, they need guidance and training in identifying and assessing high-quality information resources for educational and research use. The extensive research data resources available online for the Izu-Bonin-Mariana (IBM) subduction system that have been developed with MARGINS Program and related NSF funding are an ideal venue for focused Web research exercises that can be tailored to a range of undergraduate geoscience courses. This presentation highlights student web research activities examining: a) The 2003-2005 eruptions of Anatahan Volcano in the Mariana volcanic arc. MARGINS-supported geophysical research teams were in the region when the eruption initiated, permitting a unique "event response" data collection and analysis process, with preliminary results presented online at websites linked to the MARGINS homepage, and ultimately published in a special issue of the Journal of Volcanology and Geothermal Research. In this activity, students will conduct a directed Web surf/search effort for information on and datasets from the Anatahan arc volcano, which they will use in an interpretive study of recent magmatic activity in the Mariana arc. This activity is designed as a homework exercise for use in a junior-senior level Petrology course, but could easily be taken into greater depth for the benefit of graduate-level volcanology or geochemistry offerings. b) Geochemical and mineralogical results from ODP Legs 125 and 195 focused on diapiric serpentinite mud volcanoes, which erupt cold, high pH fluids, serpentine muds, and serpentinized ultramafic clasts at a number of sites in the forearc region of the Mariana subduction zone. The focus of this activity is an examination of the trace element chemistry of the forearc serpentines and their associated upwelling porefluids as a means of understanding the roles of ionic radius, valence, and system abundance in the formation and trace element systematics of serpentine group minerals.

Human Health Countermeasures (HHC) Element Management Plan: Human Research Program. Revision B

NASA Technical Reports Server (NTRS)

Norsk, Peter; Baumann, David

2012-01-01

NASA s Human Research Program (HRP) is an applied research and technology program within the Human Exploration and Operations Mission Directorate (HEOMD) that addresses human health and performance risk mitigation strategies in support of exploration missions. The HRP research and technology development is focused on the highest priority risks to crew health and safety with the goal of ensuring mission success and maintaining long-term crew health. Crew health and performance standards, defined by the NASA Chief Health and Medical Officer (CHMO), set the acceptable risk level for exploration missions. The HRP conducts research to inform these standards as well as provide deliverables, such as countermeasures, that ensure standards can be met to maximize human performance and mission success. The Human Health Countermeasures (HHC) Element was formed as part of the HRP to develop a scientifically-based, integrated approach to understanding and mitigating the health risks associated with human spaceflight. These health risks have been organized into four research portfolios that group similar or related risks. A fifth portfolio exists for managing technology developments and infrastructure projects. The HHC Element portfolios consist of: a) Vision and Cardiovascular; b) Exercise and Performance; c) Multisystem; d) Bone; and e) Technology and Infrastructure. The HHC identifies gaps associated with the health risks and plans human physiology research that will result in knowledge required to more fully understand risks and will result in validated countermeasures to mitigate risks.

Chemical speciation and bioavailability of rare earth elements (REEs) in the ecosystem: a review.

PubMed

Khan, Aysha Masood; Bakar, Nor Kartini Abu; Bakar, Ahmad Farid Abu; Ashraf, Muhammad Aqeel

2017-10-01

Rare earths (RE), chemically uniform group of elements due to similar physicochemical behavior, are termed as lanthanides. Natural occurrence depends on the geological circumstances and has been of long interest for geologist as tools for further scientific research into the region of ores, rocks, and oceanic water. The review paper mainly focuses to provide scientific literature about rare earth elements (REEs) with potential environmental and health effects in understanding the research. This is the initial review of RE speciation and bioavailability with current initiative toward development needs and research perceptive. In this paper, we have also discussed mineralogy, extraction, geochemistry, analytical methods of rare earth elements. In this study, REEs with their transformation and vertical distribution in different environments such as fresh and seawater, sediments, soil, weathering, transport, and solubility have been reported with most recent literature along key methods of findings. Speciation and bioavailability have been discussed in detail with special emphasis on soil, plant, and aquatic ecosystems and their impacts on the environment. This review shows that REE gained more importance in last few years due to their detrimental effects on living organisms, so their speciation, bioavailability, and composition are much more important to evaluate their health risks and are discussed thoroughly as well.

Rotorcraft flight-propulsion control integration

NASA Technical Reports Server (NTRS)

Mihaloew, James R.; Ballin, Mark G.; Ruttledge, D. G. C.

1988-01-01

The NASA Ames and Lewis Research Centers, in conjunction with the Army Research and Technology Laboratories have initiated and completed, in part, a joint research program focused on improving the performance, maneuverability, and operating characteristics of rotorcraft by integrating the flight and propulsion controls. The background of the program, its supporting programs, its goals and objectives, and an approach to accomplish them are discussed. Results of the modern control governor design of the T700 and the Rotorcraft Integrated Flight-Propulsion Control Study, which were key elements of the program, are also presented.

Qualitative Research in Emergency Care Part I: Research Principles and Common Applications.

PubMed

Choo, Esther K; Garro, Aris C; Ranney, Megan L; Meisel, Zachary F; Morrow Guthrie, Kate

2015-09-01

Qualitative methods are increasingly being used in emergency care research. Rigorous qualitative methods can play a critical role in advancing the emergency care research agenda by allowing investigators to generate hypotheses, gain an in-depth understanding of health problems or specific populations, create expert consensus, and develop new intervention and dissemination strategies. This article, Part I of a two-article series, provides an introduction to general principles of applied qualitative health research and examples of its common use in emergency care research, describing study designs and data collection methods most relevant to our field, including observation, individual interviews, and focus groups. In Part II of this series, we will outline the specific steps necessary to conduct a valid and reliable qualitative research project, with a focus on interview-based studies. These elements include building the research team, preparing data collection guides, defining and obtaining an adequate sample, collecting and organizing qualitative data, and coding and analyzing the data. We also discuss potential ethical considerations unique to qualitative research as it relates to emergency care research. © 2015 by the Society for Academic Emergency Medicine.

Qualitative Research in Emergency Care Part I: Research Principles and Common Applications

PubMed Central

Choo, Esther K.; Garro, Aris; Ranney, Megan L.; Meisel, Zachary; Guthrie, Kate Morrow

2015-01-01

Qualitative methods are increasingly being used in emergency care research. Rigorous qualitative methods can play a critical role in advancing the emergency care research agenda by allowing investigators to generate hypotheses, gain an in-depth understanding of health problems or specific populations, create expert consensus, and develop new intervention and dissemination strategies. This article, Part I of a two-article series, provides an introduction to general principles of applied qualitative health research and examples of its common use in emergency care research, describing study designs and data collection methods most relevant to our field, including observation, individual interviews, and focus groups. In Part II of this series, we will outline the specific steps necessary to conduct a valid and reliable qualitative research project, with a focus on interview-based studies. These elements include building the research team, preparing data collection guides, defining and obtaining an adequate sample, collecting and organizing qualitative data, and coding and analyzing the data. We also discuss potential ethical considerations unique to qualitative research as it relates to emergency care research. PMID:26284696

Our findings, my method: Framing science in televised interviews.

PubMed

Armon, Rony; Baram-Tsabari, Ayelet

2017-11-01

The public communication of science and technology largely depends on their framing in the news media, but scientists' role in this process has only been explored indirectly. This study focuses on storied accounts told by scientists when asked to present their research or provide expert advice in the course of a news interview. A total of 150 items from a current affairs talk show broadcast in the Israeli media were explored through a methodology combining narrative and conversation analysis. Using the concept of framing as originally proposed by Erving Goffman, we show that researchers use personal accounts as a way of reframing news stories introduced by the program hosts. Elements of method and rationale, which are usually considered technical and are shunned in journalistic reports, emerged as a crucial element in the accounts that experts themselves provided. The implications for framing research and science communication training are discussed.

Research on properties of an infrared imaging diffractive element

NASA Astrophysics Data System (ADS)

Rachoń, M.; Wegrzyńska, K.; Doch, M.; Kołodziejczyk, A.; Siemion, A.; Suszek, J.; Kakarenko, K.; Sypek, M.

2014-09-01

Novel thermovision imaging systems having high efficiency require very sophisticated optical components. This paper describes the diffractive optical elements which are designed for the wavelengths between 8 and 14 μm for the application in the FLIR cameras. In the current paper the authors present phase only diffractive elements manufactured in the etched gallium arsenide. Due to the simplicity of the manufacturing process only binary phase elements were designed and manufactured. Such solution exhibits huge chromatic aberration. Moreover, the performance of such elements is rather poor, which is caused by two factors. The first one is the limited diffraction efficiency (c.a. 40%) of binary phase structures. The second problem lies in the Fresnel losses coming from the reflection from the two surfaces (around 50%). Performance of this structures is limited and the imaging contrast is poor. However, such structures can be used for relatively cheap practical testing of the new ideas. For example this solution is sufficient for point spread function (PSF) measurements. Different diffractive elements were compared. The first one was the equivalent of the lens designed on the basis of the paraxial approximation. For the second designing process, the non-paraxial approach was used. It was due to the fact that f/# was equal to 1. For the non-paraxial designing the focal spot is smaller and better focused. Moreover, binary phase structures suffer from huge chromatic aberrations. Finally, it is presented that non-paraxially designed optical element imaging with extended depth of focus (light-sword) can suppress chromatic aberration and therefore it creates the image not only in the image plane.

Operations and support cost modeling of conceptual space vehicles

NASA Technical Reports Server (NTRS)

Ebeling, Charles

1994-01-01

The University of Dayton is pleased to submit this annual report to the National Aeronautics and Space Administration (NASA) Langley Research Center which documents the development of an operations and support (O&S) cost model as part of a larger life cycle cost (LCC) structure. It is intended for use during the conceptual design of new launch vehicles and spacecraft. This research is being conducted under NASA Research Grant NAG-1-1327. This research effort changes the focus from that of the first two years in which a reliability and maintainability model was developed to the initial development of an operations and support life cycle cost model. Cost categories were initially patterned after NASA's three axis work breakdown structure consisting of a configuration axis (vehicle), a function axis, and a cost axis. A revised cost element structure (CES), which is currently under study by NASA, was used to established the basic cost elements used in the model. While the focus of the effort was on operations and maintenance costs and other recurring costs, the computerized model allowed for other cost categories such as RDT&E and production costs to be addressed. Secondary tasks performed concurrent with the development of the costing model included support and upgrades to the reliability and maintainability (R&M) model. The primary result of the current research has been a methodology and a computer implementation of the methodology to provide for timely operations and support cost analysis during the conceptual design activities.

Microanalysis (micro-XRF, micro-XANES, and micro-XRD) of a tertiary sediment using microfocused synchrotron radiation.

PubMed

Denecke, Melissa A; Somogyi, Andrea; Janssens, Koen; Simon, Rolf; Dardenne, Kathy; Noseck, Ulrich

2007-06-01

Micro-focused synchrotron radiation techniques to investigate actinide elements in geological samples are becoming an increasingly used tool in nuclear waste disposal research. In this article, results using mu-focus techniques are presented from a bore core section of a U-rich tertiary sediment collected from Ruprechtov, Czech Republic, a natural analog to nuclear waste repository scenarios in deep geological formations. Different methods are applied to obtain various, complementary information. Elemental and element chemical state distributions are obtained from micro-XRF measurements, oxidation states of As determined from micro-XANES, and the crystalline structure of selected regions are studied by means of micro-XRD. We find that preparation of the thin section created an As oxidation state artifact; it apparently changed the As valence in some regions of the sample. Results support our previously proposed hypothesis of the mechanism for U-enrichment in the sediment. AsFeS coating on framboid Fe nodules in the sediment reduced mobile groundwater-dissolved U(VI) to less-soluble U(IV), thereby immobilizing the uranium in the sediment.

Subjective Experiences of the Benefits and Key Elements of a Cognitive Behavioral Intervention Focused on Community Work Outcomes in Persons With Mental Illness.

PubMed

Kukla, Marina; Strasburger, Amy M; Salyers, Michelle P; Rattray, Nicholas A; Lysaker, Paul H

2017-01-01

New research suggests that group-based cognitive behavioral therapy (CBT) may help improve employment outcomes in persons with mental illness, yet the effects and potential key elements facilitating change in such interventions are unclear. Using a mixed methods approach, this study examined the perspectives of persons with mental illness after participating in a pilot study of the "CBT for Work Success" intervention. Findings demonstrate that participants valued the intervention and perceived that it assisted them in achieving work goals. Therapeutic effects included improved self-efficacy, work motivation, enhanced sense of self as workers, and increased beliefs that work success is attainable. CBT for Work Success elements perceived to be important in facilitating work goals included cognitive restructuring, behavioral coping strategies, problem solving work barriers, meaningful reflection on oneself as a worker, and important factors associated with the group process. The authors discuss the implications of these findings and future research directions.

Interview-based Qualitative Research in Emergency Care Part II: Data Collection, Analysis and Results Reporting.

PubMed

Ranney, Megan L; Meisel, Zachary F; Choo, Esther K; Garro, Aris C; Sasson, Comilla; Morrow Guthrie, Kate

2015-09-01

Qualitative methods are increasingly being used in emergency care research. Rigorous qualitative methods can play a critical role in advancing the emergency care research agenda by allowing investigators to generate hypotheses, gain an in-depth understanding of health problems or specific populations, create expert consensus, and develop new intervention and dissemination strategies. In Part I of this two-article series, we provided an introduction to general principles of applied qualitative health research and examples of its common use in emergency care research, describing study designs and data collection methods most relevant to our field (observation, individual interviews, and focus groups). Here in Part II of this series, we outline the specific steps necessary to conduct a valid and reliable qualitative research project, with a focus on interview-based studies. These elements include building the research team, preparing data collection guides, defining and obtaining an adequate sample, collecting and organizing qualitative data, and coding and analyzing the data. We also discuss potential ethical considerations unique to qualitative research as it relates to emergency care research. © 2015 by the Society for Academic Emergency Medicine.

Interview-Based Qualitative Research in Emergency Care Part II: Data Collection, Analysis and Results Reporting

PubMed Central

Ranney, Megan L.; Meisel, Zachary; Choo, Esther K.; Garro, Aris; Sasson, Comilla; Morrow, Kathleen

2015-01-01

Qualitative methods are increasingly being used in emergency care research. Rigorous qualitative methods can play a critical role in advancing the emergency care research agenda by allowing investigators to generate hypotheses, gain an in-depth understanding of health problems or specific populations, create expert consensus, and develop new intervention and dissemination strategies. In Part I of this two-article series, we provided an introduction to general principles of applied qualitative health research and examples of its common use in emergency care research, describing study designs and data collection methods most relevant to our field (observation, individual interviews, and focus groups). Here in Part II of this series, we outline the specific steps necessary to conduct a valid and reliable qualitative research project, with a focus on interview-based studies. These elements include building the research team, preparing data collection guides, defining and obtaining an adequate sample, collecting and organizing qualitative data, and coding and analyzing the data. We also discuss potential ethical considerations unique to qualitative research as it relates to emergency care research. PMID:26284572

Strategic Research Directions In Microgravity Materials Science

NASA Technical Reports Server (NTRS)

Clinton, Raymond G., Jr.; Wargo, Michael J.; Marzwell, Neville L.; Sanders, Gerald; Schlagheck, Ron; Semmes, Ed; Bassler, Julie; Cook, Beth

2004-01-01

The Office of Biological and Physical Research (OBPR) is moving aggressively to align programs, projects, and products with the vision for space exploration. Research in advanced materials is a critical element in meeting exploration goals. Research in low gravity materials science in OBPR is being focused on top priority needs in support of exploration: 1) Space Radiation Shielding; 2) In Situ Resource Utilization; 3) In Situ Fabrication and Repair; 4) Materials Science for Spacecraft and Propulsion Systems; 5) Materials Science for Advanced Life Support Systems. Roles and responsibilities in low gravity materials research for exploration between OBPR and the Office of Exploration Systems are evolving.

Preparing for High Technology: Successful Co-op Strategies. Research and Development Series No. 263.

ERIC Educational Resources Information Center

Franchak, Stephen J.; Smith, O. H. Michael

This document has been prepared to assist program administrators and practitioners in planning and implementing cooperative (co-op) programs in high technology occupational areas. Information focuses on the key elements, strategies, and procedures of successful co-op programs. The guide contains nine chapters and is based on a review of the…

French & Raven's Power Bases: An Appropriate Focus for Educational Researchers and Practitioners.

ERIC Educational Resources Information Center

Tauber, Robert T.

"Whether it is to further learning in general, or discipline in particular, teachers must effectively exercise power." Five power bases available to teachers are identified in this paper each containing the common element that they are all dependent upon student beliefs. These power bases are: (1) coercive power, based on a student's belief that…

The Place of Learning Quantum Theory in Physics Teacher Education: Motivational Elements Arising from the Context

ERIC Educational Resources Information Center

Körhasan, Nilüfer Didis

2015-01-01

Quantum theory is one of the most successful theories in physics. Because of its abstract, mathematical, and counter-intuitive nature, many students have problems learning the theory, just as teachers experience difficulty in teaching it. Pedagogical research on quantum theory has mainly focused on cognitive issues. However, affective issues about…

The DEDEPRO[TM] Model for Regulating Teaching and Learning: Recent Advances

ERIC Educational Resources Information Center

de la Fuente Arias, Jesus; Justicia, Fernando Justicia

2007-01-01

Research on "self-regulated learning" has evolved from classic models focused exclusively on the student and the learning process, to models which take into consideration the context or the teaching process, as an element which can stimulate self-regulation in students. The DEDEPRO[TM] model is offered as a model of the latter type,…

Education and Lifelong Learning in Romania--Perspectives of the Year 2020

ERIC Educational Resources Information Center

Popescu, Veronica Adriana; Popescu, Gheorghe N.; Popescu, Cristina Raluca

2012-01-01

Our research study focuses on the problems of education and lifelong learning in the Romanian society of the year 2020. Starting from the idea that lifelong learning represents the continuous building of skills and knowledge through the life of an individual, we believe that the process of continuous education is the key element that each and…

Participative Case Studies: Integrating Case Writing and a Traditional Case Study Approach in a Marketing Context

ERIC Educational Resources Information Center

Forman, Howard

2006-01-01

Case-based pedagogy is a valuable tool for applying business concepts and theories to organizational contexts. Traditional case-based pedagogy offers such learning opportunities. What this pedagogy lacks, however, is an element of real-time experiential learning opportunities. This research focuses on the advantages of incorporating a case-writing…

Attention, Intention and the Structure of Discourse. Technical Report No. 380.

ERIC Educational Resources Information Center

Grosz, B. J.; Sidner, C. L.

Developing and integrating two lines of research, one focusing on discourse and the other on intention recognition in discourse, this paper presents the basic elements of a computational theory of discourse. The paper argues that by specifying the basic units a discourse comprises and the ways in which they can relate, an account of discourse…

From Isolation to Interaction? Network-Based Professional Development and Teacher Professional Communication.

ERIC Educational Resources Information Center

McMahon, Teresa A.

The Mathematics Learning Forums, a collaborative effort of Bank Street College and the Center for Children and Technology, Education Development Center, Inc., provided the primary research setting for this study. Each 8-week forum focuses on specific elements of a mathematics content area and is designed to address both student learning and…

Rethinking Diversity in Resegregated Schools: Lessons from a Case Study of Urban K-8 Preservice Teachers

ERIC Educational Resources Information Center

Michael-Luna, Sara; Marri, Anand R.

2011-01-01

Using the research question "How do urban teacher candidates (TCs) understand socioeconomic, racial, and cultural diversity in resegregated urban educational contexts," this case study examines the perceptions of preservice K-8 teachers in an urban education program. These TCs complicated diversity by focusing on "unseen" elements that are often…

Equity from an Anthropological Perspective. Research and Development Series No. 214M.

ERIC Educational Resources Information Center

Schwartz, Henrietta

This paper focuses on issues related to the cultural aspects of sex equity and schooling in American society. It begins with a framework of assumptions that relate the discipline of anthropology to concepts of equity. Education or schooling is discussed as a special form of socialization, and four operational elements are cited that are displayed…

Aberration analysis and calculation in system of Gaussian beam illuminates lenslet array

NASA Astrophysics Data System (ADS)

Zhao, Zhu; Hui, Mei; Zhou, Ping; Su, Tianquan; Feng, Yun; Zhao, Yuejin

2014-09-01

Low order aberration was founded when focused Gaussian beam imaging at Kodak KAI -16000 image detector, which is integrated with lenslet array. Effect of focused Gaussian beam and numerical simulation calculation of the aberration were presented in this paper. First, we set up a model of optical imaging system based on previous experiment. Focused Gaussian beam passed through a pinhole and was received by Kodak KAI -16000 image detector whose microlenses of lenslet array were exactly focused on sensor surface. Then, we illustrated the characteristics of focused Gaussian beam and the effect of relative space position relations between waist of Gaussian beam and front spherical surface of microlenses to the aberration. Finally, we analyzed the main element of low order aberration and calculated the spherical aberration caused by lenslet array according to the results of above two steps. Our theoretical calculations shown that , the numerical simulation had a good agreement with the experimental result. Our research results proved that spherical aberration was the main element and made up about 93.44% of the 48 nm error, which was demonstrated in previous experiment. The spherical aberration is inversely proportional to the value of divergence distance between microlens and waist, and directly proportional to the value of the Gaussian beam waist radius.

[Research progress on mechanical performance evaluation of artificial intervertebral disc].

PubMed

Li, Rui; Wang, Song; Liao, Zhenhua; Liu, Weiqiang

2018-03-01

The mechanical properties of artificial intervertebral disc (AID) are related to long-term reliability of prosthesis. There are three testing methods involved in the mechanical performance evaluation of AID based on different tools: the testing method using mechanical simulator, in vitro specimen testing method and finite element analysis method. In this study, the testing standard, testing equipment and materials of AID were firstly introduced. Then, the present status of AID static mechanical properties test (static axial compression, static axial compression-shear), dynamic mechanical properties test (dynamic axial compression, dynamic axial compression-shear), creep and stress relaxation test, device pushout test, core pushout test, subsidence test, etc. were focused on. The experimental techniques using in vitro specimen testing method and testing results of available artificial discs were summarized. The experimental methods and research status of finite element analysis were also summarized. Finally, the research trends of AID mechanical performance evaluation were forecasted. The simulator, load, dynamic cycle, motion mode, specimen and test standard would be important research fields in the future.

The snakes and ladders of National Health Service management in England.

PubMed

Powell, Martin

2014-01-01

This article explores managerial careers in the National Health Service (NHS) through the lens of talent management, particularly focusing on how managers view barriers (snakes) and facilitators (ladders) to career progression. There is a significant literature on enablers and barriers to career progression, but much of this focuses on specific groups such as black and minority ethnic and female workers, and there is relatively little material on the general workforce of the NHS. The research design is a mixed method quantitative (questionnaire) and qualitative (interview and focus group) approach consisting of a quasi-probability element that focuses on a maximum variety sample and a purposive element that seeks policy views at central and strategic health authority level, and examines talent management in high-performing NHS organisations. Ladders are identified as follows: volunteering, secondment, networking, mentoring, academic qualifications, development, good role models/managers and appraisal/personal development plan. Snakes are identified as managing expectations; identity and cognitive diversity; location; sector; NHS toxic and favouritism culture; poor talent spotting; credentialism; exclusive approach to talent; and sustainability. It concludes that while previous conceptual and empirical work is fairly clear on any ladders, it is less clear on snakes. Copyright © 2013 John Wiley & Sons, Ltd.

Deposition of magnesium nitride thin films on stainless steel-304 substrates by using a plasma focus device

NASA Astrophysics Data System (ADS)

Ramezani, Amir Hoshang; Habibi, Maryam; Ghoranneviss, Mahmood

2014-08-01

In this research, for the first time, we synthesize magnesium nitride thin films on 304-type stainless steel substrates using a Mather-type (2 kJ) plasma focus (PF) device. The films of magnesium nitride are coated with different number of focus shots (like 15, 25 and 35) at a distance of 8 cm from the anode tip and at 0° angular position with respect to the anode axis. For investigation of the structural properties and surface morphology of magnesium nitride films, we utilized the X-ray diffractometer (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM) analysis, respectively. Also, the elemental composition is characterized by energy-dispersive X-ray (EDX) analysis. Furthermore, Vicker's microhardness is used to study the mechanical properties of the deposited films. The results show that the degree of crystallinity of deposited thin films (from XRD), the average size of particles and surface roughness (from AFM), crystalline growth of structures (from SEM) and the hardness values of the films depend on the number of focus shots. The EDX analysis demonstrates the existence of the elemental composition of magnesium in the deposited samples.

Preparation for Scaling Studies of Ice-Crystal Icing at the NRC Research Altitude Test Facility

NASA Technical Reports Server (NTRS)

Struk, Peter M.; Bencic, Timothy J.; Tsao, Jen-Ching; Fuleki, Dan; Knezevici, Daniel C.

2013-01-01

This paper describes experiments conducted at the National Research Council (NRC) of Canadas Research Altitiude Test Facility between March 26 and April 11, 2012. The tests, conducted collaboratively between NASA and NRC, focus on three key aspects in preparation for later scaling work to be conducted with a NACA 0012 airfoil model in the NRC Cascade rig: (1) cloud characterization, (2) scaling model development, and (3) ice-shape profile measurements. Regarding cloud characterization, the experiments focus on particle spectra measurements using two shadowgraphy methods, cloud uniformity via particle scattering from a laser sheet, and characterization of the SEA Multi-Element probe. Overviews of each aspect as well as detailed information on the diagnostic method are presented. Select results from the measurements and interpretation are presented which will help guide future work.

Modeling and control of a hydraulically actuated flexible-prismatic link robot

DOE Office of Scientific and Technical Information (OSTI.GOV)

Love, L.; Kress, R.; Jansen, J.

1996-12-01

Most of the research related to flexible link manipulators to date has focused on single link, fixed length, single plane of vibration test beds. In addition, actuation has been predominantly based upon electromagnetic motors. Ironically, these elements are rarely found in the existing industrial long reach systems. This manuscript describes a new hydraulically actuated, long reach manipulator with a flexible prismatic link at Oak Ridge National Laboratory (ORNL). Focus is directed towards both modeling and control of hydraulic actuators as well as flexible links that have variable natural frequencies.

Interpersonal and systemic aspects of emotional abuse at work: the target's perspective.

PubMed

Keashly, L

2001-06-01

The most frequent form of workplace aggression is not physical, it is emotional and psychological in nature. Known by many names, emotional abuse at work is rapidly becoming recognized as pervasive and costly both in individual and organizational terms. Most of the research to date on emotional abuse at work has utilized survey and other quantitative methodologies in an effort to document the presence, prevalence, and impact of these behaviors. However, these methodologies are based on researchers' definitions and theories of what constitutes emotional abuse rather than on the meaning given to these experiences by the targets of these behaviors. A thorough understanding of this phenomenon requires a scholarly appreciation of the target's experience. Taking "feeling abused" as the criterion variable, this study examined target's experiences based on interviews with people who self-identifed as having experienced difficulties with a boss, coworker, or subordinate. The interpersonal aspects of emotional abuse focused on the nature of behaviors exhibited and the respondents' labeling of their experience. Consistent with elements of researchers' definitions, behaviors were defined as abusive when they were repetitive, resulted in injury or harm to target, and were experienced as a lack of recognition of the individual's integrity. Judgments of violation of standards of conduct and unsolicited nature of the behaviors were also related to respondents' experiences. Relative power differential was also an important element. However, contrary to researchers' definitions, actor intent was not central in defining the experience as abusive. The systemic aspect of emotional abuse was illustrated in the nature of organizational responding to concerns raised by respondents. These responses were of critical importance in respondents' labeling of their experiences as abusive. The focus on the meaning of the behaviors for the respondents provides an enriched picture of key definitional elements. Implications of the findings for future research are discussed.

Impact of Patient Protection and Affordable Care Act on academic radiology departments' clinical, research, and education missions.

PubMed

Mansoori, Bahar; Vidal, Lorenna L; Applegate, Kimberly; Rawson, James V; Novak, Ronald D; Ros, Pablo R

2013-10-01

The Patient Protection and Affordable Care Act (ACA) generated significant media attention since its inception. When the law was approved in 2010, the U.S. health care system began facing multiple changes to adapt and to incorporate measures to meet the new requirements. These mandatory changes will be challenging for academic radiology departments (ARDs) since they will need to promote a shift from a volume-focused to a value-focused practice. This will affect all components of the mission of ARDs, including clinical practice, education, and research. A unique key element to success in this transition is to focus on both quality and safety, thus improving the value of radiology in the post-ACA era. Given the changes ARDs will face during the implementation of ACA, suggestions are provided on how to adapt ARDs to this new environment. Copyright © 2013. Published by Elsevier Inc.

Branding a School-Based Campaign Combining Healthy Eating and Eco-friendliness.

PubMed

Folta, Sara C; Koch-Weser, Susan; Tanskey, Lindsay A; Economos, Christina D; Must, Aviva; Whitney, Claire; Wright, Catherine M; Goldberg, Jeanne P

2018-02-01

To develop a branding strategy for a campaign to improve the quality of foods children bring from home to school, using a combined healthy eating and eco-friendly approach and for a control campaign focusing solely on nutrition. Formative research was conducted with third- and fourth-grade students in lower- and middle-income schools in Greater Boston and their parents. Phase I included concept development focus groups. Phase II included concept testing focus groups. A thematic analysis approach was used to identify key themes. In phase I, the combined nutrition and eco-friendly messages resonated; child preference emerged as a key factor affecting food from home. In phase II, key themes included fun with food and an element of mystery. Themes were translated into a concept featuring food face characters. Iterative formative research provided information necessary to create a brand that appealed to a specified target audience. Copyright © 2017. Published by Elsevier Inc.

Qualitative study of knowledge and attitudes to biobanking among lay persons in Nigeria.

PubMed

Igbe, Michael A; Adebamowo, Clement A

2012-10-16

Interest in biobanking for collection of specimens for non-communicable diseases research has grown in recent times. This paper explores the perspectives of Nigerians on donation of specimen for the biobanking research. We conducted 16 Focus Group Discussions (FGD) with individuals from different ethnic, age and socio-economic groups in Kano (North), Enugu (Southeast), Oyo States (Southwest) and Abuja, the Federal Capital Territory (Central) of Nigeria. We used topic guides and prompt statements to explore the knowledge and understanding of interviewees to general issues about biobanking of biospecimens, their use and specifically about role of biobanking in non-communicable diseases research. A total of 123 individuals participated in 16 focus group discussions in 2011. Our participants had limited knowledge of the concept of biobanking but accepted it once they were educated about it and saw it as a worthwhile venture. Half of our study participants supported use of broad consent, a quarter supported restricted consent while the remaining quarter were in favour of tiered consent. Most discussants support shipment of their samples to other countries for further research, but they prefer those collaborations to be done only with competent, ethical researchers and they would like to receive feedback about such projects. The majority preferred health care as a benefit from participation, particularly for any unexpected condition that may be discovered during the course of the research instead of financial compensation. Participants emphasized the need to ensure that donated samples were not used for research that contradicts their religious beliefs. Our study demonstrates that our participants accepted biobanking once they understand it but there were different attitudes to elements of biobanking such as type of consent. Our study highlights the need to carefully document population attitudes to elements of modern scientific research and the consenting process.

An explorative study of experiences of healthcare providers posing as simulated care receivers in a 'care-ethical' lab.

PubMed

Vanlaere, Linus; Timmermann, Madeleine; Stevens, Marleen; Gastmans, Chris

2012-01-01

In recent approaches to ethics, the personal involvement of health care providers and their empathy are perceived as important elements of an overall ethical ability. Experiential working methods are used in ethics education to foster, inter alia, empathy. In 2008, the care-ethics lab 'sTimul' was founded in Flanders, Belgium, to provide training that focuses on improving care providers' ethical abilities through experiential working simulations. The curriculum of sTimul focuses on empathy sessions, aimed at care providers' empathic skills. The present study provides better insight into how experiential learning specifically targets the empathic abilities of care providers. Providing contrasting experiences that affect the care providers' self-reflection seems a crucial element in this study. Further research is needed to provide more insight into how empathy leads to long-term changes in behaviour.

Principles of Induction Accelerators

NASA Astrophysics Data System (ADS)

Briggs*, Richard J.

The basic concepts involved in induction accelerators are introduced in this chapter. The objective is to provide a foundation for the more detailed coverage of key technology elements and specific applications in the following chapters. A wide variety of induction accelerators are discussed in the following chapters, from the high current linear electron accelerator configurations that have been the main focus of the original developments, to circular configurations like the ion synchrotrons that are the subject of more recent research. The main focus in the present chapter is on the induction module containing the magnetic core that plays the role of a transformer in coupling the pulsed power from the modulator to the charged particle beam. This is the essential common element in all these induction accelerators, and an understanding of the basic processes involved in its operation is the main objective of this chapter. (See [1] for a useful and complementary presentation of the basic principles in induction linacs.)

Teaching authorship and publication practices in the biomedical and life sciences.

PubMed

Macrina, Francis L

2011-06-01

Examination of a limited number of publisher's Instructions for Authors, guidelines from two scientific societies, and the widely accepted policy document of the International Committee of Medical Journal Editors (ICMJE) provided useful information on authorship practices. Three of five journals examined (Nature, Science, and the Proceedings of the National Academy of Sciences) publish papers across a variety of disciplines. One is broadly focused on topics in medical research (New England Journal of Medicine) and one publishes research reports in a single discipline (Journal of Bacteriology). Similar elements of publication policy and accepted practices were found across the policies of these journals articulated in their Instructions for Authors. A number of these same elements were found in the professional society guidelines of the Society for Neuroscience and the American Chemical Society, as well as the ICMJE Uniform Requirements for Manuscripts Submitted to Biomedical Journals. Taken together, these sources provide the basis for articulating best practices in authorship in scientific research. Emerging from this material is a definition of authorship, as well as policy statements on duplicative publication, conflict of interest disclosure, electronic access, data sharing, digital image integrity, and research requiring subjects' protection, including prior registration of clinical trials. These common elements provide a foundation for teaching about scientific authorship and publication practices across biomedical and life sciences disciplines.

Flexural Fillet Geometry Optimization for Design of Force Transducers Used in Aeronautics Testing

NASA Technical Reports Server (NTRS)

Lynn, Keith C.; Dixon, Genevieve

2014-01-01

Force transducer designs used in the ground testing aeronautics community have seen minimal change over the last few decades. With increased focus on data quality and long- term performance capabilities over the life of these instruments, it is critical to investigate new methods that improve these designs. One area of focus in the past few years at NASA has been on the design of the exural elements of traditional force balance transducers. Many of the heritage balances that have been heavily used over the last few decades have started to develop fatigue cracks. The recent focus on the exural design of traditional single-piece force balances revolves around the design of these elements such that stress concentrations are minimized, with the overall goal of increasing the fatigue life of the balance. Recent research in the area of using conic shaped llets in the highly stressed regions of traditional force balances will be discussed, with preliminary numerical and experimental data results. A case study will be presented which discusses integration of this knowledge into a new high-capacity semi-span force balance

Flexural Fillet Geometry Optimization for Design of Force Transducers Used in Aeronautics Testing

NASA Technical Reports Server (NTRS)

Lynn, Keith C.; Dixon, Genevieve

2015-01-01

Force transducer designs used in the ground testing aeronautics community have seen minimal change over the last few decades. With increased focus on data quality and long-term performance capabilities over the life of these instruments, it is critical to investigate new methods that improve these designs. One area of focus in the past few years at NASA has been on the design of the flexural elements of traditional force balance transducers. Many of the heritage balances that have been heavily used over the last few decades have started to develop fatigue cracks. The recent focus on the flexural design of traditional single-piece force balances revolves around the design of these elements such that stress concentrations are minimized, with the overall goal of increasing the fatigue life of the balance. Recent research in the area of using conic shaped fillets in the highly stressed regions of traditional force balances will be discussed, with preliminary numerical and experimental data results. A case study will be presented which discusses integration of this knowledge into a new high-capacity semi-span force balance.

Mass distribution and elemental analysis of the resultant atmospheric aerosol particles generated in controlled biomass burning processes

NASA Astrophysics Data System (ADS)

Ordou, N.; Agranovski, I. E.

2017-12-01

Air contamination resulting from bushfires is becoming increasingly important research question, as such disasters frequently occur in many countries. The objectives of this project were focused on physical and chemical characterisations of particulate emission resulting from burning of common representatives of Australian vegetation under controlled laboratory conditions. It was found that leaves are burned mostly with flaming phase and producing black smoke resulting in larger particles compared to white smoke in case of branches and grass, dominated by smouldering phase, producing finer particles. Following elemental analysis determined nine main elements in three different size fractions of particulate matter for each category of burning material, ranging from 14.1 μm to particle sizes below 2.54 μm. Potassium was found to be one of the main biomass markers, and sulphur was the ubiquitous element among the smoke particles followed by less prevalent trace elements like Na, Al, Mg, Zn, Si, Ca, and Fe.

The Use of Deconstructed Tires as Elastic Elements in Railway Tracks.

PubMed

Sol-Sánchez, Miguel; Moreno-Navarro, Fernando; Rubio-Gámez, Mª Carmen

2014-08-18

Elastic elements such as rail pads, under sleeper pads and under ballast mats are railway components that allow for a reduction in track deterioration and vibrations. And they are furthermore commonly used to obtain an optimal vertical stiffness of the infrastructure. However, the use of elastomeric materials can increase construction costs and the consumption of raw materials. Thus, the utilization of used tire layers offers an alternative to reuse an abundant waste reducing the cost of elastic elements. In addition, an innovator technique allows deconstructing tire layers without grinding up the material, reducing production costs at the same time that tire properties are remained. This research is focused on the study of the viability of developing elastic components from used tire layers by evaluating the influence of thickness, the resistance capacity of the elements and their behavior in a ballast box. Results indicate the ability of tire pads to manufacture elastic elements (rail pads, under sleeper pads and under ballast mats) to be used in railway tracks.

The Use of Deconstructed Tires as Elastic Elements in Railway Tracks

PubMed Central

Sol-Sánchez, Miguel; Moreno-Navarro, Fernando; Rubio-Gámez, Mª Carmen

2014-01-01

Elastic elements such as rail pads, under sleeper pads and under ballast mats are railway components that allow for a reduction in track deterioration and vibrations. And they are furthermore commonly used to obtain an optimal vertical stiffness of the infrastructure. However, the use of elastomeric materials can increase construction costs and the consumption of raw materials. Thus, the utilization of used tire layers offers an alternative to reuse an abundant waste reducing the cost of elastic elements. In addition, an innovator technique allows deconstructing tire layers without grinding up the material, reducing production costs at the same time that tire properties are remained. This research is focused on the study of the viability of developing elastic components from used tire layers by evaluating the influence of thickness, the resistance capacity of the elements and their behavior in a ballast box. Results indicate the ability of tire pads to manufacture elastic elements (rail pads, under sleeper pads and under ballast mats) to be used in railway tracks. PMID:28788168

Organic matrix-related mineralization of sea urchin spicules, spines, test and teeth.

PubMed

Veis, Arthur

2011-06-01

The camarodont echinoderms have five distinct mineralized skeletal elements: embryonic spicules, mature test, spines, lantern stereom and teeth. The spicules are transient structural elements whereas the spines, and test plates are permanent. The teeth grow continuously. The mineral is a high magnesium calcite, but the magnesium content is different in each type of skeletal element, varying from 5 to 40 mole% Mg. The organic matrix creates the spaces and environments for crystal initiation and growth. The detailed mechanisms of crystal regulation are not known, but acidic and phosphorylated matrix proteins may be of special importance. Biochemical studies, sequencing of the complete genome, and high-throughput proteomic analysis have not yet provided insight into the mechanisms of crystallization, calcite composition, and orientation applicable to all skeletal elements. The embryonic spicules are not representative of the mature skeletal elements. The next phase of research will have to focus on the specific localization of the proteins and individual biochemistries of each system with regard to mineral content and placement.

Three tenets for secure cyber-physical system design and assessment

NASA Astrophysics Data System (ADS)

Hughes, Jeff; Cybenko, George

2014-06-01

This paper presents a threat-driven quantitative mathematical framework for secure cyber-physical system design and assessment. Called The Three Tenets, this originally empirical approach has been used by the US Air Force Research Laboratory (AFRL) for secure system research and development. The Tenets were first documented in 2005 as a teachable methodology. The Tenets are motivated by a system threat model that itself consists of three elements which must exist for successful attacks to occur: - system susceptibility; - threat accessibility and; - threat capability. The Three Tenets arise naturally by countering each threat element individually. Specifically, the tenets are: Tenet 1: Focus on What's Critical - systems should include only essential functions (to reduce susceptibility); Tenet 2: Move Key Assets Out-of-Band - make mission essential elements and security controls difficult for attackers to reach logically and physically (to reduce accessibility); Tenet 3: Detect, React, Adapt - confound the attacker by implementing sensing system elements with dynamic response technologies (to counteract the attackers' capabilities). As a design methodology, the Tenets mitigate reverse engineering and subsequent attacks on complex systems. Quantified by a Bayesian analysis and further justified by analytic properties of attack graph models, the Tenets suggest concrete cyber security metrics for system assessment.

Characteristics and genesis of Rare Earth Element (REE) in western Indonesia

NASA Astrophysics Data System (ADS)

Handoko, A. D.; Sanjaya, E.

2018-02-01

Rare Earth Element (REE) has unique properties that have been used in many hightech applications. The demand of REE increased recently in the world due to its special properties. Although REE concentration in the crust is higher than gold, economically viable deposits are still rare. Reduction of REE exports by China cause increased prices of REE. Due to this condition, exploration of potential REE mines emerged. Indonesia also participates in this phenomenon, and explore the possibility of REE mines in its area. This review will discuss the characteristics and genesis of REE and its occurrence in western Indonesia; focused in Sumatera, Tin Island, and Kalimantan. The review is done based on literature research from several resources about characteristics of rare earth element in general and in the given area. The research shows that the potential REE mines can be found in several different locations in Indonesia, such as Tin Island, Sumatera, and Kalimantan. Most of them are composed of monazite, zircon, and xenotime as rare earth minerals. Monazite iss known for its elevated number of radioactive elements, so study about radioactive content and more environment friendly ore processing becomes compulsory.

Standardized Cardiovascular Data for Clinical Research, Registries, and Patient Care

PubMed Central

Anderson, H. Vernon; Weintraub, William S.; Radford, Martha J.; Kremers, Mark S.; Roe, Matthew T.; Shaw, Richard E.; Pinchotti, Dana M.; Tcheng, James E.

2013-01-01

Relatively little attention has been focused on standardization of data exchange in clinical research studies and patient care activities. Both are usually managed locally using separate and generally incompatible data systems at individual hospitals or clinics. In the past decade there have been nascent efforts to create data standards for clinical research and patient care data, and to some extent these are helpful in providing a degree of uniformity. Nevertheless these data standards generally have not been converted into accepted computer-based language structures that could permit reliable data exchange across computer networks. The National Cardiovascular Research Infrastructure (NCRI) project was initiated with a major objective of creating a model framework for standard data exchange in all clinical research, clinical registry, and patient care environments, including all electronic health records. The goal is complete syntactic and semantic interoperability. A Data Standards Workgroup was established to create or identify and then harmonize clinical definitions for a base set of standardized cardiovascular data elements that could be used in this network infrastructure. Recognizing the need for continuity with prior efforts, the Workgroup examined existing data standards sources. A basic set of 353 elements was selected. The NCRI staff then collaborated with the two major technical standards organizations in healthcare, the Clinical Data Interchange Standards Consortium and Health Level 7 International, as well as with staff from the National Cancer Institute Enterprise Vocabulary Services. Modeling and mapping were performed to represent (instantiate) the data elements in appropriate technical computer language structures for endorsement as an accepted data standard for public access and use. Fully implemented, these elements will facilitate clinical research, registry reporting, administrative reporting and regulatory compliance, and patient care. PMID:23500238

Parents, Practitioners, and Researchers: Community-Based Participatory Research With Early Head Start

PubMed Central

McAllister, Carol L.; Green, Beth L.; Terry, Martha Ann; Herman, Vivian; Mulvey, Laurie

2003-01-01

Community-based participatory research (CBPR) is an approach to research and evaluation that is receiving increased attention in the field of public health. Our report discusses the application of this approach to research and evaluation with an Early Head Start (EHS) program in Pittsburgh, Pa. Our primary purpose is to illustrate the key elements that contributed to effective collaboration among researchers, EHS practitioners, and parents of EHS children in the conduct of the study. The focus is not on research findings but on research process. Our goal is to make the practices of CBPR visible and explicit so they can be analyzed, further developed, and effectively applied to a range of public health issues in a diversity of community contexts. PMID:14534219

A DRDC Management Accountability Framework

DTIC Science & Technology

2009-09-01

51 A.2 Cultural Theory: Risk, Blame and Good Governance ................................................. 53 A.3...the MAF. These elements guide good management, enclosing the elements required to make good decisions. 18 In essence, the elements focus on the...of these areas.20 As a guide to good management practices, the elements focus on organizational capacity and capability within a department 21

African Americans and participation in clinical trials: differences in beliefs and attitudes by gender.

PubMed

BeLue, R; Taylor-Richardson, K D; Lin, J; Rivera, A T; Grandison, D

2006-12-01

To explore gender differences in perceptions of 1) barriers and motivators to participation in clinical trials and perceived need of clinical trials and 2) perceptions of risks and benefits of participation in clinical trials in African American men and women. Focus groups were conducted among African American participants by gender. A total of 67 African American participated in the focus groups. All focus groups were audio-taped and transcribed verbatim. Data analysis was performed by combining the key elements of grounded theory and content analysis with the assistance of the qualitative software ATLAS.ti 5.0. Different themes emerged for men versus women. The business and economic of research were important to male participants. The researcher-participant relationship emerged as one of the strongest themes related to potential female participation in research. Focus group results indicate that African American men and women present different preferences, beliefs and barriers to participation. Men expressed the desire to know information on funding issues, financial benefit and impact of the research. Women expressed the desire to be treated respectfully and as an individual as opposed to just a study subject. Integrating gender preferences into researcher-participant interactions, advertisement, informed consent delivery and advertisement of research studies may lead to increased participation rates. Discussing and presenting relevant information on clinical research funding mechanisms, and the business of clinical research with potential participants may be helpful in building trust with the researcher and the research team. Creating a process for information exchange and methods to minimize the power imbalance between the researcher and participant may also build trust and help participants feel more comfortable to participate in research.

Driving Circuitry for Focused Ultrasound Noninvasive Surgery and Drug Delivery Applications

PubMed Central

El-Desouki, Munir M.; Hynynen, Kullervo

2011-01-01

Recent works on focused ultrasound (FUS) have shown great promise for cancer therapy. Researchers are continuously trying to improve system performance, which is resulting in an increased complexity that is more apparent when using multi-element phased array systems. This has led to significant efforts to reduce system size and cost by relying on system integration. Although ideas from other fields such as microwave antenna phased arrays can be adopted in FUS, the application requirements differ significantly since the frequency range used in FUS is much lower. In this paper, we review recent efforts to design efficient power monitoring, phase shifting and output driving techniques used specifically for high intensity focused ultrasound (HIFU). PMID:22346589

Driving circuitry for focused ultrasound noninvasive surgery and drug delivery applications.

PubMed

El-Desouki, Munir M; Hynynen, Kullervo

2011-01-01

Recent works on focused ultrasound (FUS) have shown great promise for cancer therapy. Researchers are continuously trying to improve system performance, which is resulting in an increased complexity that is more apparent when using multi-element phased array systems. This has led to significant efforts to reduce system size and cost by relying on system integration. Although ideas from other fields such as microwave antenna phased arrays can be adopted in FUS, the application requirements differ significantly since the frequency range used in FUS is much lower. In this paper, we review recent efforts to design efficient power monitoring, phase shifting and output driving techniques used specifically for high intensity focused ultrasound (HIFU).

Equitable research: a bridge too far?

NASA Astrophysics Data System (ADS)

Walls, Leon

2017-06-01

This paper is written in response to Angela Chapman and Allan Feldman's research study, "Cultivation of science identity through authentic science in an urban high school". I utilize this forum piece to extend the call for "awakening a dialogue" that critically assesses the effectiveness of current K-12 science education research in addressing the needs of populations of color. I take the opportunity to first discuss elements of what an equitable research focus might look like. I finish by critiquing and ultimately commending the authors on the degree to which they succeed in demonstrating an equitable approach to the design and carrying out of their study.

Risk reduction using DDP (Defect Detection and Prevention): Software support and software applications

NASA Technical Reports Server (NTRS)

Feather, M. S.

2001-01-01

Risk assessment and mitigation is the focus of the Defect Detection and Prevention (DDP) process, which has been applied to spacecraft technology assessments and planning, both hardware and software. DDP's major elements and their relevance to core requirement engineering concerns are summarized. The accompanying research demonstration illustrates DDP's tool support, and further customizations for application to software.

Impact of the Thinking Reader[R] Software Program on Grade 6 Reading Vocabulary, Comprehension, Strategies, and Motivation: Final Report. NCEE 2010-4035

ERIC Educational Resources Information Center

Drummond, Kathryn; Chinen, Marjorie; Duncan, Teresa Garcia; Miller, H. Ray; Fryer, Lindsay; Zmach, Courtney; Culp, Katherine

2011-01-01

"Thinking Reader" is a software program for students in Grades 5-8 that incorporates elements commonly identified in policy reports as being key components of effective adolescent literacy instruction. This evaluation of the impact of "Thinking Reader" use by Grade 6 students focused on two confirmatory research questions about…

Creating Sustainable Relationships Using the Strengths, Opportunities, Aspirations and Results Framework, Trust, and Environmentalism: A Research-Based Case Study

ERIC Educational Resources Information Center

Sprangel, Joseph; Stavros, Jacqueline; Cole, Matthew

2011-01-01

New forms of organization development are moving from a classical diagnostic perspective to a dialogic perspective. This move includes a focus on exploring positive states of organizing, shared aspirations, and the design of preferred futures as key outcomes of a strategic change process. Training and development that applies the elements of the…

A Fantastic Decomposition: Unsettling the Fury of Having to Wait

ERIC Educational Resources Information Center

Holmes, Rachel

2012-01-01

This article draws on data from a single element of a larger project, which focused on the issue of "how children develop a reputation as "naughty" in the early years classroom." The author draws attention to the (in)corporeal (re)formation of the line in school, undertaking a decomposition of the topological spaces of research/art/education. She…

The New Youth Entrepreneur: How To Sell Your Idea. The "What's in It for Me" (WIIFM) Factor. Module 4.

ERIC Educational Resources Information Center

Kourilsky, Marilyn; And Others

The New Youth Entrepreneur currriculum is a series of 12 youth-oriented educational modules containing instructional materials, learning activities, and checkup exercises designed to teach students key elements of entrepreneurship. This document is the fourth module, which focuses on issues related to marketing, such as market niches and research,…

The Relationship between Principals' Leadership Styles and School Culture, as Assessed by Teachers

ERIC Educational Resources Information Center

Green, Lessie Marquita

2016-01-01

Leadership and school culture are two factors that have a great impact in schools today. Much research has focused on leaders, but more is needed on the culture of schools. Improving both elements of leadership and school culture may also increase other challenges that schools face such as student achievement. The purpose of this study was to…

Analysis of high speed flow, thermal and structural interactions

NASA Technical Reports Server (NTRS)

Thornton, Earl A.

1994-01-01

Research for this grant focused on the following tasks: (1) the prediction of severe, localized aerodynamic heating for complex, high speed flows; (2) finite element adaptive refinement methodology for multi-disciplinary analyses; (3) the prediction of thermoviscoplastic structural response with rate-dependent effects and large deformations; (4) thermoviscoplastic constitutive models for metals; and (5) coolant flow/structural heat transfer analyses.

Variable flushing mechanisms and landscape structure control stream DOC export during snowmelt in a set of nested catchments

Treesearch

Vincent J. Pacific; Kelsey G. Jencso; Brian L. McGlynn

2010-01-01

Stream DOC dynamics during snowmelt have been the focus of much research, and numerous DOC mobilization and delivery mechanisms from riparian and upland areas have been proposed. However, landscape structure controls on DOC export from riparian and upland landscape elements remains poorly understood. We investigated stream and groundwater DOC dynamics across three...

Mimetic Desire and Intersubjectivity in Disciplinary Cultures: Constraints or Enablers to Learning in Higher Education?

ERIC Educational Resources Information Center

Gunn, Vicky

2014-01-01

The interplay of the inner lives (intersubjectivity) of students and academics within a range of disciplinary cultural manifestations is a key element in the generation of student learning. This article suggests that research on student learning has yet to adequately articulate how this interplay occurs, suggesting that a focus on the influence of…

How to Address Citizens' Practices and Policies on Sustainability? A Consultative Tool for Brokering Policy-Related Knowledge between the Worlds of Policymaking and Everyday

ERIC Educational Resources Information Center

Espluga, Josep; Konrad, Wilfried; Mays, Claire; Oltra, Christian; Poumadére, Marc; Prades, Ana

2016-01-01

An innovative investigative approach (STAVE), combining elements of research, engagement and brokerage, was used to uncover policy assumptions and daily experiences related to energy use practices. Exploratory work within three policymaker institutions and eight reconvened focus groups were carried out in three different European countries…

Rethinking Pedagogy in Urban Spaces: Implementing Hip-Hop Pedagogy in the Urban Science Classroom

ERIC Educational Resources Information Center

Adjapong, Edmund S.; Emdin, Christopher

2015-01-01

A significant amount of research regarding Hip-Hop Based Education (HHBE) fails to provide insight on how to incorporate elements of Hip-Hop into daily teaching practices; rather Hip-Hop based educators focus mainly on incorporating Hip-Hop culture into curricula. This study explores the benefits of using two specific Hip-Hop pedagogical practices…

A Phenomenological Study: Faculty Members' Perception of Change Related to Embracing Student-Centered Teaching in a Private College

ERIC Educational Resources Information Center

Corrigan, Constance

2017-01-01

Most literature about student-centered teaching focuses on classroom techniques and student assessment. Another important element is the meaning educators ascribe to the transition to a student-centered classroom style. In this study, the researcher proposes to examine faculty members' perceptions related to their use of pedagogical style in the…

Exploring the Critical Dialogical Process: Psychological and Physical Spaces Creating Conditions Conducive to Multi-System Collective Action in Higher Education

ERIC Educational Resources Information Center

Pittman-Adkins, Pamela

2015-01-01

Purpose: The purpose of this study is to explore physical and psychological elements conducive to engaging educators from K-12 and higher education in meaningful exchanges that lead to collective action. Research Design: Through a qualitative case study of two higher education sites focused on advancing academically-based service learning…

f-Elements in ionic liquids: A synthetic, spectroscopic and electrochemical study

NASA Astrophysics Data System (ADS)

Bhatt, Anand Indravadan

This thesis reports on chemical research directed towards the utilisation of low temperature ionic liquids (LTILs) for the electrorefming of uranium and plutonium from spent nuclear fuel. Initial studies focus on evaluating the relevant physical and electrochemical properties of LTILs. One room temperature ionic liquid, [(CH[3])[3]N(n-C[4]H[9])][N(SO[2]CF[3])[2

Comparative Analysis of Classroom Speech in Upper Level Spanish College Courses: A Social Constructivist View

ERIC Educational Resources Information Center

Rondon-Pari, Graziela

2011-01-01

This study reflects a social constructivist theoretical framework in which the zone of proximal development (ZPD) is a central element, as two teaching approaches, communicative language teaching (CLT) and explicit focus on form (FonF) are examined. Research questions include: Are CLT and explicit FonF conducive to reaching the ZPD? Is there a…

Ecopedagogy as an element of citizenship education: The dialectic of global/local spheres of citizenship and critical environmental pedagogies

NASA Astrophysics Data System (ADS)

Misiaszek, Greg William

2016-10-01

Emerging from popular education movements in Latin America, ecopedagogy is a critical environmental pedagogy which focuses on understanding the connections between social conflict and environmentally harmful acts carried out by humans. These connections are often politically hidden in education. Ecopedagogy, while being pluralistic, is in its essence defined as a critical, transformative environmental pedagogy centred on increasing social and environmental justice. Its ultimate aim is to find a sustainable balance between the conflicting goals of diverse notions of human progress and environmental wellbeing. This article is based on two comparative research projects. The first was a qualitative study on ecopedagogical models involving 31 expert ecopedagogues in Argentina, Brazil and the Appalachian region of the United States. They were asked for their perspectives on how successful ecopedagogy can be defined within the contexts in which they taught and conducted research. The second study analysed how 18 international expert scholars of citizenship and/or environmental pedagogy from six world continents regarded the ways in which citizenship intersects with environmental issues and the pedagogies of both in an increasingly globalised world, with specific focus on Global Citizenship Education. Results from the first study indicate the following two needs for effective environmental pedagogies: (1) for there to be an ecopedagogical paradigm shift in environmental teaching and research; and (2) for ecopedagogy to be an essential element of citizenship education (and vice versa). This article examines how conflicting processes of globalisation both help and hinder in achieving such a paradigm shift by decentring traditional nation-state citizenship. Results from the second study indicate how critical teaching within and between different spheres of citizenship (e.g. local, national, global, and planetary citizenship) is essential for ecopedagogy (and the ecopedagogical element).

Dynamic-Receive Focusing with High-Frequency Annular Arrays

NASA Astrophysics Data System (ADS)

Ketterling, J. A.; Mamou, J.; Silverman, R. H.

High-frequency ultrasound is commonly employed for ophthalmic and small-animal imaging because of the fine-resolution images it affords. Annular arrays allow improved depth of field and lateral resolution versus commonly used single-element, focused transducers. The best image quality from an annular array is achieved by using synthetic transmit-to-receive focusing while utilizing data from all transmit-to-receive element combinations. However, annular arrays must be laterally scanned to form an image and this requires one pass for each of the array elements when implementing full synthetic transmit-to-receive focusing. A dynamic-receive focusing approach permits a single pass, although at a sacrifice of depth of field and lateral resolution. A five-element, 20-MHz annular array is examined to determine the acoustic beam properties for synthetic and dynamic-receive focusing. A spatial impulse response model is used to simulate the acoustic beam properties for each focusing case and then data acquired from a human eye-bank eye are processed to demonstrate the effect of each approach on image quality.

Rotorcraft flight-propulsion control integration: An eclectic design concept

NASA Technical Reports Server (NTRS)

Mihaloew, James R.; Ballin, Mark G.; Ruttledge, D. C. G.

1988-01-01

The NASA Ames and Lewis Research Centers, in conjunction with the Army Research and Technology Laboratories, have initiated and partially completed a joint research program focused on improving the performance, maneuverability, and operating characteristics of rotorcraft by integrating the flight and propulsion controls. The background of the program, its supporting programs, its goals and objectives, and an approach to accomplish them are discussed. Results of the modern control governor design of the General Electric T700 engine and the Rotorcraft Integrated Flight-Propulsion Control Study, which were key elements of the program, are also presented.

Baseline Geochemical Data for Medical Researchers in Kentucky

NASA Astrophysics Data System (ADS)

Anderson, W.

2017-12-01

According to the Centers for Disease Control, Kentucky has the highest cancer incidence and death rates in the country. New efforts by geochemists and medical researchers are examining ways to diagnose the origin and sources of carcinogenesis. In an effort to determine if naturally occurring geochemical or mineral elements contributes to the cancer causation, the Kentucky Geological Survey has established a Minerals and Geochemical Database that is available to medical researchers for examination of baseline geochemistry and determine if naturally occurring mineral or chemical elements contribute to the high rate of cancers in the state. Cancer causation is complex, so if natural sources can be accounted for, then researchers can focus on the true causation. Naturally occurring minerals, metals and elements occur in many parts of the state, and their presence is valuable for evaluating causation. For example, some data in the database contain maps showing (a) statewide elemental geochemistry, (b) areas of black shale oxidation occurrence, which releases metals in soil and surface waters, (c) some clay deposits in the state that can contain high content of rare earth elements, and (d) site-specific uranium occurrences. Knowing the locations of major ore deposits in the state can also provide information related to mineral and chemical anomalies, such as for base metals and mercury. Radionuclide data in soil and water analyses are limited, so future research may involve obtaining more analyses to determine radon potential. This database also contains information on faulting and geology in the state. Although the metals content of trees may not seem relevant, the ash and humus content of degraded trees affects soil, stream sediment and water geochemistry. Many rural homes heat with wood, releasing metals into the surrounding biosphere. Stressed vegetation techniques can be used to explore for ore deposits and look for high metal contents in soils and rocks. These naturally occurring elements could be used for baseline information related to new collaborative research that integrates medicine, geology, forestry, and botany to predict metal contents of stream sediments, soil residuum, trees, plants, and forest cover and determine their relation to carcinogenesis.

Novel "Elements" of Immune Suppression within the Tumor Microenvironment.

PubMed

Gurusamy, Devikala; Clever, David; Eil, Robert; Restifo, Nicholas P

2017-06-01

Adaptive evolution has prompted immune cells to use a wide variety of inhibitory signals, many of which are usurped by tumor cells to evade immune surveillance. Although tumor immunologists often focus on genes and proteins as mediators of immune function, here we highlight two elements from the periodic table-oxygen and potassium-that suppress the immune system in previously unappreciated ways. While both are key to the maintenance of T-cell function and tissue homeostasis, they are exploited by tumors to suppress immuno-surveillance and promote metastatic spread. We discuss the temporal and spatial roles of these elements within the tumor microenvironment and explore possible therapeutic interventions for effective and promising anticancer therapies. Cancer Immunol Res; 5(6); 426-33. ©2017 AACR . ©2017 American Association for Cancer Research.

Chemical elements in Mediterranean macroalgae. A review.

PubMed

Bonanno, Giuseppe; Orlando-Bonaca, Martina

2018-02-01

This review analyzes the state of knowledge on the capacity of Mediterranean macroalgae to accumulate, tolerate and biomonitor macro- and micro-elements present in seawater and sediments. The results show that the investigated macroalgal species amount to c. 5.0% of all Mediterranean native Rhodophyta, Chlorophyta and Ochrophyta. The most commonly analyzed elements in algae were Pb, Cd, Zn and Cu, whereas very few studies were available for macroelements such as Ca and K. Uptake mechanisms and the factors influencing accumulation are overall well known, but the available studies are restricted to a limited number of chemical elements and algal species. This review also shows that macroalgae can accumulate and tolerate high concentrations of chemical elements, and can act as effective bioindicators of marine pollution. Phytotoxic limits for algal species are not clearly identified by the available studies and require further investigation. Future research should focus on the development of protocols for long-term biomonitoring programmes through the use of macroalgae. Future studies also need to investigate the biomagnification of toxic trace elements in macroalgae-based food webs. Copyright © 2017 Elsevier Inc. All rights reserved.

Beyond STS: A research-based framework for socioscientific issues education

NASA Astrophysics Data System (ADS)

Zeidler, Dana L.; Sadler, Troy D.; Simmons, Michael L.; Howes, Elaine V.

2005-05-01

An important distinction can be made between the science, technology, and society (STS) movement of past years and the domain of socioscientific issues (SSI). STS education as typically practiced does not seem embedded in a coherent developmental or sociological framework that explicitly considers the psychological and epistemological growth of the child, nor the development of character or virtue. In contrast, the SSI movement focuses on empowering students to consider how science-based issues reflect, in part, moral principles and elements of virtue that encompass their own lives, as well as the physical and social world around them. The focus of this paper is to describe a research-based framework of current research and practice that identifies factors associated with reasoning about socioscientific issues and provide a working model that illustrates theoretical and conceptual links among key psychological, sociological, and developmental factors central to SSI and science education.

Developments in the photonics program at OSC

NASA Astrophysics Data System (ADS)

Peyghambarian, N.

2014-10-01

The photonics program at the College of Optical Sciences started nearly 30 years ago. In 1984, the program was focused on development of femtosecond laser sources and their use in investigating semiconductor carrier dynamics. The program grew into polymer and organic optics in late 1989 and was strengthened by the winning of the CAMP MURI from ONR in 1995 that was focused on multifunctional polymers including photorefractive polymers, organic light emitting diodes and 3D direct laser writing. Also in 1995, the areas of glass waveguide and fiber optic materials and devices were added to the program. In 2008, the optical communication and future internet research was started through winning the CIAN NSF ERC. Expertise in thin films, optical storage and the fundamental aspects of light are elements of the overall research program. Holographic 3D display, autofocus lenses, bio-medical imaging and devices for vision have also been ongoing research areas.

Using Community-based Participatory Research to Adapt keepin’ it REAL: Creating a Socially, Developmentally, and Academically Appropriate Prevention Curriculum for 5th Graders

PubMed Central

Harthun, Mary L.; Dustman, Patricia A.; Reeves, Leslie J.; Marsiglia, Flavio F.; Hecht, Michael L.

2010-01-01

This paper reports on a process in which program designers, classroom teachers, and students worked together to adapt the 7th grade “keepin’ it REAL” prevention curriculum to a developmentally, socially, and academically appropriate curriculum for 5th graders. A Community-Based Participatory Research methodology (CBPR), combined with a 9-step adaptation model, emphasized a collaborative approach, both transformative and empowering. Essential adaptation elements were the Risk-to-Resiliency Continuum; the teaching of a wide range of skills including risk assessment, decision making, and resistance strategies; and, maintaining the theoretical grounding of Narrative Theory, Communication Competence, and Focus Theory of Norms. This paper describes how CBPR methodology can be conducted successfully while focusing on sustained theoretical grounding and effective research practices in a school-based setting. PMID:21057596

The Physical/Chemical Closed-Loop Life Support Research Project

NASA Technical Reports Server (NTRS)

Bilardo, Vincent J., Jr.

1990-01-01

The various elements of the Physical/Chemical Closed-Loop Life Support Research Project (P/C CLLS) are described including both those currently funded and those planned for implementation at ARC and other participating NASA field centers. The plan addresses the entire range of regenerative life support for Space Exploration Initiative mission needs, and focuses initially on achieving technology readiness for the Initial Lunar Outpost by 1995-97. Project elements include water reclamation, air revitalization, solid waste management, thermal and systems control, and systems integration. Current analysis estimates that each occupant of a space habitat will require a total of 32 kg/day of supplies to live and operate comfortably, while an ideal P/C CLLS system capable of 100 percent reclamation of air and water, but excluding recycling of solid wastes or foods, will reduce this requirement to 3.4 kg/day.

Transferring diffractive optics from research to commercial applications: Part II - size estimations for selected markets

NASA Astrophysics Data System (ADS)

Brunner, Robert

2014-04-01

In a series of two contributions, decisive business-related aspects of the current process status to transfer research results on diffractive optical elements (DOEs) into commercial solutions are discussed. In part I, the focus was on the patent landscape. Here, in part II, market estimations concerning DOEs for selected applications are presented, comprising classical spectroscopic gratings, security features on banknotes, DOEs for high-end applications, e.g., for the semiconductor manufacturing market and diffractive intra-ocular lenses. The derived market sizes are referred to the optical elements, itself, rather than to the enabled instruments. The estimated market volumes are mainly addressed to scientifically and technologically oriented optical engineers to serve as a rough classification of the commercial dimensions of DOEs in the different market segments and do not claim to be exhaustive.

Regulation of cytoplasmic mRNA decay

PubMed Central

Schoenberg, Daniel R.; Maquat, Lynne E.

2012-01-01

Discoveries made over the past 20 years highlight the importance of mRNA decay as a means to modulate gene expression and thereby protein production. Up until recently, studies focused largely on identifying cis-acting sequences that serve as mRNA stability or instability elements, the proteins that bind these elements, how the process of translation influences mRNA decay, and the ribonucleases that catalyze decay. Now, current studies have begun to elucidate how the decay process is regulated. This review examines our current understanding of how mammalian-cell mRNA decay is controlled by different signaling pathways and lays out a framework for future research. PMID:22392217

One-dimensional analysis of filamentary composite beam columns with thin-walled open sections

NASA Technical Reports Server (NTRS)

Lo, Patrick K.-L.; Johnson, Eric R.

1986-01-01

Vlasov's one-dimensional structural theory for thin-walled open section bars was originally developed and used for metallic elements. The theory was recently extended to laminated bars fabricated from advanced composite materials. The purpose of this research is to provide a study and assessment of the extended theory. The focus is on flexural and torsional-flexural buckling of thin-walled, open section, laminated composite columns. Buckling loads are computed from the theory using a linear bifurcation analysis and a geometrically nonlinear beam column analysis by the finite element method. Results from the analyses are compared to available test data.

Rewards and incentives for the provision of human tissue for research.

PubMed

Devaney, Sarah

2014-01-01

The Nuffield Council on Bioethics' 2011 report, Human Bodies: Donation for Medicine and Research, proposes a system for examining the ethical implications of different types of incentives for the provision of human tissue for use in medicine and research. The cornerstone of this system is the principle of altruism which, the Council recommends, should, where possible, remain the starting point for any such tissue provision. Using the Council's example of ova provision for research as an area in which altruism-based rewards might be departed from, this article argues that such a system has the potential to become inconsistent and unnecessarily complex. It suggests that the outcomes-focussed and motivations-focussed justifications the Council provides do not sit easily within the fast-paced and unpredictable area of biotechnology research. Further, it may undermine the focus on autonomy that is enshrined in the relevant legislation. This article suggests that a fair system for incentivising and rewarding the provision of human tissue in research should be developed, which focuses on elements of this role that are common to all tissue providers.

Moral Emotions and Moral Behavior

PubMed Central

Stuewig, Jeff; Mashek, Debra J.

2011-01-01

Moral emotions represent a key element of our human moral apparatus, influencing the link between moral standards and moral behavior. This chapter reviews current theory and research on moral emotions. We first focus on a triad of negatively valenced “self-conscious” emotions—shame, guilt, and embarrassment. As in previous decades, much research remains focused on shame and guilt. We review current thinking on the distinction between shame and guilt, and the relative advantages and disadvantages of these two moral emotions. Several new areas of research are highlighted: research on the domain-specific phenomenon of body shame, styles of coping with shame, psychobiological aspects of shame, the link between childhood abuse and later proneness to shame, and the phenomena of vicarious or “collective” experiences of shame and guilt. In recent years, the concept of moral emotions has been expanded to include several positive emotions—elevation, gratitude, and the sometimes morally relevant experience of pride. Finally, we discuss briefly a morally relevant emotional process—other-oriented empathy. PMID:16953797

Moral emotions and moral behavior.

PubMed

Tangney, June Price; Stuewig, Jeff; Mashek, Debra J

2007-01-01

Moral emotions represent a key element of our human moral apparatus, influencing the link between moral standards and moral behavior. This chapter reviews current theory and research on moral emotions. We first focus on a triad of negatively valenced "self-conscious" emotions-shame, guilt, and embarrassment. As in previous decades, much research remains focused on shame and guilt. We review current thinking on the distinction between shame and guilt, and the relative advantages and disadvantages of these two moral emotions. Several new areas of research are highlighted: research on the domain-specific phenomenon of body shame, styles of coping with shame, psychobiological aspects of shame, the link between childhood abuse and later proneness to shame, and the phenomena of vicarious or "collective" experiences of shame and guilt. In recent years, the concept of moral emotions has been expanded to include several positive emotions-elevation, gratitude, and the sometimes morally relevant experience of pride. Finally, we discuss briefly a morally relevant emotional process-other-oriented empathy.

Heavy metal and trace elements in riparian vegetation and macrophytes associated with lacustrine systems in Northern Patagonia Andean Range.

PubMed

Juárez, Andrea; Arribére, María A; Arcagni, Marina; Williams, Natalia; Rizzo, Andrea; Ribeiro Guevara, Sergio

2016-09-01

Vegetation associated with lacustrine systems in Northern Patagonia was studied for heavy metal and trace element contents, regarding their elemental contribution to these aquatic ecosystems. The research focused on native species and exotic vascular plant Salix spp. potential for absorbing heavy metals and trace elements. The native species studied were riparian Amomyrtus luma, Austrocedrus chilensis, Chusquea culeou, Desfontainia fulgens, Escallonia rubra, Gaultheria mucronata, Lomatia hirsuta, Luma apiculata, Maytenus boaria, Myrceugenia exsucca, Nothofagus antarctica, Nothofagus dombeyi, Schinus patagonicus, and Weinmannia trichosperma, and macrophytes Hydrocotyle chamaemorus, Isöetes chubutiana, Galium sp., Myriophyllum quitense, Nitella sp. (algae), Potamogeton linguatus, Ranunculus sp., and Schoenoplectus californicus. Fresh leaves were analyzed as well as leaves decomposing within the aquatic bodies, collected from lakes Futalaufquen and Rivadavia (Los Alerces National Park), and lakes Moreno and Nahuel Huapi (Nahuel Huapi National Park). The elements studied were heavy metals Ag, As, Cd, Hg, and U, major elements Ca, K, and Fe, and trace elements Ba, Br, Co, Cr, Cs, Hf, Na, Rb, Se, Sr, and Zn. Geochemical tracers La and Sm were also determined to evaluate contamination of the biological tissues by geological particulate (sediment, soil, dust) and to implement concentration corrections.

The Cancer Family Caregiving Experience: An Updated and Expanded Conceptual Model

PubMed Central

Fletcher, Barbara Swore; Miaskowski, Christine; Given, Barbara; Schumacher, Karen

2011-01-01

Objective The decade from 2000–2010 was an era of tremendous growth in family caregiving research specific to the cancer population. This research has implications for how cancer family caregiving is conceptualized, yet the most recent comprehensive model of cancer family caregiving was published ten years ago. Our objective was to develop an updated and expanded comprehensive model of the cancer family caregiving experience, derived from concepts and variables used in research during past ten years. Methods A conceptual model was developed based on cancer family caregiving research published from 2000–2010. Results Our updated and expanded model has three main elements: 1) the stress process, 2) contextual factors, and 3) the cancer trajectory. Emerging ways of conceptualizing the relationships between and within model elements are addressed, as well as an emerging focus on caregiver-patient dyads as the unit of analysis. Conclusions Cancer family caregiving research has grown dramatically since 2000 resulting in a greatly expanded conceptual landscape. This updated and expanded model of the cancer family caregiving experience synthesizes the conceptual implications of an international body of work and demonstrates tremendous progress in how cancer family caregiving research is conceptualized. PMID:22000812

Implementation strategies: recommendations for specifying and reporting

PubMed Central

2013-01-01

Implementation strategies have unparalleled importance in implementation science, as they constitute the ‘how to’ component of changing healthcare practice. Yet, implementation researchers and other stakeholders are not able to fully utilize the findings of studies focusing on implementation strategies because they are often inconsistently labelled and poorly described, are rarely justified theoretically, lack operational definitions or manuals to guide their use, and are part of ‘packaged’ approaches whose specific elements are poorly understood. We address the challenges of specifying and reporting implementation strategies encountered by researchers who design, conduct, and report research on implementation strategies. Specifically, we propose guidelines for naming, defining, and operationalizing implementation strategies in terms of seven dimensions: actor, the action, action targets, temporality, dose, implementation outcomes addressed, and theoretical justification. Ultimately, implementation strategies cannot be used in practice or tested in research without a full description of their components and how they should be used. As with all intervention research, their descriptions must be precise enough to enable measurement and ‘reproducibility.’ We propose these recommendations to improve the reporting of implementation strategies in research studies and to stimulate further identification of elements pertinent to implementation strategies that should be included in reporting guidelines for implementation strategies. PMID:24289295

Implementation strategies: recommendations for specifying and reporting.

PubMed

Proctor, Enola K; Powell, Byron J; McMillen, J Curtis

2013-12-01

Implementation strategies have unparalleled importance in implementation science, as they constitute the 'how to' component of changing healthcare practice. Yet, implementation researchers and other stakeholders are not able to fully utilize the findings of studies focusing on implementation strategies because they are often inconsistently labelled and poorly described, are rarely justified theoretically, lack operational definitions or manuals to guide their use, and are part of 'packaged' approaches whose specific elements are poorly understood. We address the challenges of specifying and reporting implementation strategies encountered by researchers who design, conduct, and report research on implementation strategies. Specifically, we propose guidelines for naming, defining, and operationalizing implementation strategies in terms of seven dimensions: actor, the action, action targets, temporality, dose, implementation outcomes addressed, and theoretical justification. Ultimately, implementation strategies cannot be used in practice or tested in research without a full description of their components and how they should be used. As with all intervention research, their descriptions must be precise enough to enable measurement and 'reproducibility.' We propose these recommendations to improve the reporting of implementation strategies in research studies and to stimulate further identification of elements pertinent to implementation strategies that should be included in reporting guidelines for implementation strategies.

Understanding the Role of Biology in the Global Environment: NASA'S Mission to Planet Earth

NASA Technical Reports Server (NTRS)

Townsend, William F.

1996-01-01

NASA has long used the unique perspective of space as a means of expanding our understanding of how the Earth's environment functions. In particular, the linkages between land, air, water, and life-the elements of the Earth system-are a focus for NASA's Mission to Planet Earth. This approach, called Earth system science, blends together fields like meteorology, biology, oceanography, and atmospheric science. Mission to Planet Earth uses observations from satellites, aircraft, balloons, and ground researchers as the basis for analysis of the elements of the Earth system, the interactions between those elements, and possible changes over the coming years and decades. This information is helping scientists improve our understanding of how natural processes affect us and how we might be affecting them. Such studies will yield improved weather forecasts, tools for managing agriculture and forests, information for fishermen and local planners, and, eventually, an enhanced ability to predict how the climate will change in the future. NASA has designed Mission to Planet Earth to focus on five primary themes: Land Cover and Land Use Change; Seasonal to Interannual Climate Prediction; Natural Hazards; Long-Term Climate Variability; and Atmosphere Ozone.

H-P adaptive methods for finite element analysis of aerothermal loads in high-speed flows

NASA Technical Reports Server (NTRS)

Chang, H. J.; Bass, J. M.; Tworzydlo, W.; Oden, J. T.

1993-01-01

The commitment to develop the National Aerospace Plane and Maneuvering Reentry Vehicles has generated resurgent interest in the technology required to design structures for hypersonic flight. The principal objective of this research and development effort has been to formulate and implement a new class of computational methodologies for accurately predicting fine scale phenomena associated with this class of problems. The initial focus of this effort was to develop optimal h-refinement and p-enrichment adaptive finite element methods which utilize a-posteriori estimates of the local errors to drive the adaptive methodology. Over the past year this work has specifically focused on two issues which are related to overall performance of a flow solver. These issues include the formulation and implementation (in two dimensions) of an implicit/explicit flow solver compatible with the hp-adaptive methodology, and the design and implementation of computational algorithm for automatically selecting optimal directions in which to enrich the mesh. These concepts and algorithms have been implemented in a two-dimensional finite element code and used to solve three hypersonic flow benchmark problems (Holden Mach 14.1, Edney shock on shock interaction Mach 8.03, and the viscous backstep Mach 4.08).

The Process and Impact of Stakeholder Engagement in Developing a Pediatric Intensive Care Unit Communication and Decision-Making Intervention.

PubMed

Michelson, Kelly N; Frader, Joel; Sorce, Lauren; Clayman, Marla L; Persell, Stephen D; Fragen, Patricia; Ciolino, Jody D; Campbell, Laura C; Arenson, Melanie; Aniciete, Danica Y; Brown, Melanie L; Ali, Farah N; White, Douglas

2016-12-01

Stakeholder-developed interventions are needed to support pediatric intensive care unit (PICU) communication and decision-making. Few publications delineate methods and outcomes of stakeholder engagement in research. We describe the process and impact of stakeholder engagement on developing a PICU communication and decision-making support intervention. We also describe the resultant intervention. Stakeholders included parents of PICU patients, healthcare team members (HTMs), and research experts. Through a year-long iterative process, we involved 96 stakeholders in 25 meetings and 26 focus groups or interviews. Stakeholders adapted an adult navigator model by identifying core intervention elements and then determining how to operationalize those core elements in pediatrics. The stakeholder input led to PICU-specific refinements, such as supporting transitions after PICU discharge and including ancillary tools. The resultant intervention includes navigator involvement with parents and HTMs and navigator-guided use of ancillary tools. Subsequent research will test the feasibility and efficacy of our intervention.

Apparatus, systems, and methods for ultrasound synthetic aperature focusing

DOEpatents

Schuster, George J.; Crawford, Susan L.; Doctor, Steven R.; Harris, Robert V.

2005-04-12

One form of the present invention is a technique for interrogating a sample with ultrasound which includes: generating ultrasonic energy data corresponding to a volume of a sample and performing a synthetic aperture focusing technique on the ultrasonic energy data. The synthetic aperture focusing technique includes: defining a number of hyperbolic surfaces which extend through the volume at different depths and a corresponding number of multiple element accumulation vectors, performing a focused element calculation procedure for a group of vectors which are representative of the interior of a designated aperture, performing another focused element calculation procedure for vectors corresponding to the boundary of the aperture, and providing an image corresponding to features of the sample in accordance with the synthetic aperture focusing technique.

Assessing the Relationship between Family Mealtime Communication and Adolescent Emotional Well-Being Using the Experience Sampling Method

ERIC Educational Resources Information Center

Offer, Shira

2013-01-01

While most prior research has focused on the frequency of family meals the issue of which elements of family mealtime are most salient for adolescents' well-being has remained overlooked. The current study used the experience sampling method, a unique form of time diary, and survey data drawn from the 500 Family Study (N = 237 adolescents with…

Soil nutrients, landscape age, and Sphagno-Eriophoretum vaginati plant communities in Arctic moist-acidic Tundra landscapes

Treesearch

Joel Mercado-Diaz; William Gould; Grizelle Gonzalez

2014-01-01

Most research exploring the relationship between soil chemistry and vegetation in Alaskan Arctic tundra landscapes has focused on describing differences in soil elemental concentrations (e.g. C, N and P) of areas with contrasting vegetation types or landscape age. In this work we assess the effect of landscape age on physico-chemical parameters in organic and mineral...

Problem and Dilemma Identification and Formulation As the Most Critical Element of the Decision-Making Process: Behavioral Biases and Characteristics.

ERIC Educational Resources Information Center

Pashiardis, Petros

This paper presents an overview of research in the field of decision theory, with a focus on problem and identification. The goal is to make the decision-making process as rational as possible in order to maximize the rational administration of the organization. The decisions associated with educational administration can be categorized as…

The Structure of Good Beginnings: The Early Experiences of Graduate Students. ASHE Annual Meeting Paper.

ERIC Educational Resources Information Center

Boyle, Peg; Boice, Bob

This paper proposes a model for graduate student success and reports the results of a study of factors affecting the success of 40 first-year graduate students. Based on a review of the literature, a four-element model for graduate success was devised that focused on: (1) immersion in research activities; (2) academic regimen and planning; (3)…

Relationships between models used to analyze fire and fuel management alternatives

Treesearch

Nicholas L. Crookston; Werner A. Kurz; Sarah J. Beukema; Elizabeth D. Reinhardt

2000-01-01

Needs for analytical tools, the roles existing tools play, the processes they represent, and how they might interact are elements of key findings generated during a workshop held in Seattle February 17-18, 1999. The workshop was attended by 26 Joint Fire Science Program (JFSP) stakeholders and researchers. A focus of the workshop was the Fire and Fuels Extension to the...

Feeding Pigs and Looking for "Guembe": The Local Production of Knowledge about the Natural World of Peasant and Indigenous Children in San Ignacio

ERIC Educational Resources Information Center

Padawer, Ana

2012-01-01

Ever since the first ethnographic studies, the question about how people learn in different contexts was an essential element of research. Studies in anthropology of education have increasingly focused on schooling. Nowadays, however, the traditional topic of learning in out-of-school contexts recovers its relevance because the development of…

On the Nature of Agreement in English-French Acquisition: A Processing Investigation in the Verbal and Nominal Domains

ERIC Educational Resources Information Center

Renaud, Claire

2010-01-01

Current second language (L2) research focuses on the level of features--that is, the core elements of languages in the Minimalist Program framework. These features, involved in computations, are further divided into two types: those that indicate to which category a word belongs (i.e., interpretable features) versus those that constrain the type…

Guidelines for the Gamification of Self-Management of Chronic Illnesses: Multimethod Study

PubMed Central

Wills, Gary; Ranchhod, Ashok

2017-01-01

Background Gamification is the use of game elements and techniques in nongaming contexts. The use of gamification in health care is receiving a great deal of attention in both academic research and the industry. However, it can be noticed that many gamification apps in health care do not follow any standardized guidelines. Objective This research aims to (1) present a set of guidelines based on the validated framework the Wheel of Sukr and (2) assess the guidelines through expert interviews and focus group sessions with developers. Methods Expert interviews (N=6) were conducted to assess the content of the guidelines and that they reflect the Wheel of Sukr. In addition, the guidelines were assessed by developers (N=15) in 5 focus group sessions, where each group had an average of 3 developers. Results The guidelines received support from the experts. By the end of the sixth interview, it was determined that a saturation point was reached. Experts agreed that the guidelines accurately reflect the framework the Wheel of Sukr and that developers can potentially use them to create gamified self-management apps for chronic illnesses. Moreover, the guidelines were welcomed by developers who participated in the focus group sessions. They found the guidelines to be clear, useful, and implementable. Also, they were able to suggest many ways of gamifying a nongamified self-management app when they were presented with one. Conclusions The findings suggest that the guidelines introduced in this research are clear, useful, and ready to be implemented for the creation of self-management apps that use the notion of gamification as described in the Wheel of Sukr framework. The guidelines are now ready to be practically tested. Further practical studies of the effectiveness of each element in the guidelines are to be carried out. PMID:28500018

Superconductor Semiconductor Research for NASA's Submillimeter Wavelength Missions

NASA Technical Reports Server (NTRS)

Crowe, Thomas W.

1997-01-01

Wideband, coherent submillimeter wavelength detectors of the highest sensitivity are essential for the success of NASA's future radio astronomical and atmospheric space missions. The critical receiver components which need to be developed are ultra- wideband mixers and suitable local oscillator sources. This research is focused on two topics, (1) the development of reliable varactor diodes that will generate the required output power for NASA missions in the frequency range from 300 GHZ through 2.5 THz, and (2) the development of wideband superconductive mixer elements for the same frequency range.

A Mathematical Model Development for the Lateral Collapse of Octagonal Tubes

NASA Astrophysics Data System (ADS)

Ghazali Kamardan, M.; Sufahani, Suliadi; Othman, M. Z. M.; Che-Him, Norziha; Khalid, Kamil; Roslan, Rozaini; Ali, Maselan; Zaidi, A. M. A.

2018-04-01

Many researches has been done on the lateral collapse of tube. However, the previous researches only focus on cylindrical and square tubes. Then a research has been done discovering the collapse behaviour of hexagonal tube and the mathematic model of the deformation behaviour had been developed [8]. The purpose of this research is to study the lateral collapse behaviour of symmetric octagonal tubes and hence to develop a mathematical model of the collapse behaviour of these tubes. For that, a predictive mathematical model was developed and a finite element analysis procedure was conducted for the lateral collapse behaviour of symmetric octagonal tubes. Lastly, the mathematical model was verified by using the finite element analysis simulation results. It was discovered that these tubes performed different deformation behaviour than the cylindrical tube. Symmetric octagonal tubes perform 2 phases of elastic - plastic deformation behaviour patterns. The mathematical model had managed to show the fundamental of the deformation behaviour of octagonal tubes. However, further studies need to be conducted in order to further improve on the proposed mathematical model.

The BALDER Beamline at the MAX IV Laboratory

NASA Astrophysics Data System (ADS)

Klementiev, K.; Norén, K.; Carlson, S.; Sigfridsson Clauss, K. G. V.; Persson, I.

2016-05-01

X-ray absorption spectroscopy (XAS) includes well-established methods to study the local structure around the absorbing element - extended X-ray absorption fine structure (EXAFS), and the effective oxidation number or to quantitatively determine the speciation of an element in a complex matrix - X-ray absorption near-edge structure (XANES). The increased brilliance and intensities available at the new generation of synchrotron light sources makes it possible to study, in-situ and in-operando, much more dilute systems with relevance for natural systems, as well as the micro-scale variability and dynamics of chemical reactions on the millisecond time-scale. The design of the BALDER beamline at the MAX IV Laboratory 3 GeV ring has focused on a high flux of photons in a wide energy range, 2.4-40 keV, where the K-edge is covered for the elements S to La, and the L 3-edge for all elements heavier than Sb. The overall design of the beamline will allow large flexibility in energy range, beam size and data collection time. The other focus of the beamline design is the possibility to perform multi-technique analyses on samples. Development of sample environment requires focus on implementation of auxiliary methods in such a way that techniques like Fourier transform infrared (FTIR) spectroscopy, UV-Raman spectroscopy, X-ray diffraction and/or mass spectrometry can be performed simultaneously as the XAS study. It will be a flexible system where different instruments can be plugged in and out depending on the needs for the particular investigation. Many research areas will benefit from the properties of the wiggler based light source and the capabilities to perform in-situ and in-operando measurements, for example environmental and geochemical sciences, nuclear chemistry, catalysis, materials sciences, and cultural heritage.

Simplified equation for Young's modulus of CNT reinforced concrete

NASA Astrophysics Data System (ADS)

Chandran, RameshBabu; Gifty Honeyta A, Maria

2017-12-01

This research investigation focuses on finite element modeling of carbon nanotube (CNT) reinforced concrete matrix for three grades of concrete namely M40, M60 and M120. Representative volume element (RVE) was adopted and one-eighth model depicting the CNT reinforced concrete matrix was simulated using FEA software ANSYS17.2. Adopting random orientation of CNTs, with nine fibre volume fractions from 0.1% to 0.9%, finite element modeling simulations replicated exactly the CNT reinforced concrete matrix. Upon evaluations of the model, the longitudinal and transverse Young's modulus of elasticity of the CNT reinforced concrete was arrived. The graphical plots between various fibre volume fractions and the concrete grade revealed simplified equation for estimating the young's modulus. It also exploited the fact that the concrete grade does not have significant impact in CNT reinforced concrete matrix.

Total reflection X-ray fluorescence as a tool for food screening

NASA Astrophysics Data System (ADS)

Borgese, Laura; Bilo, Fabjola; Dalipi, Rogerta; Bontempi, Elza; Depero, Laura E.

2015-11-01

This review provides a comprehensive overview of the applications of total reflection X-ray fluorescence (TXRF) in the field of food analysis. Elemental composition of food is of great importance, since food is the main source of essential, major and trace elements for animals and humans. Some potentially toxic elements, dangerous for human health may contaminate food, entering the food chain from the environment, processing, and storage. For this reason the elemental analysis of food is fundamental for safety assessment. Fast and sensitive analytical techniques, able to detect major and trace elements, are required as a result of the increasing demand on multi-elemental information and product screening. TXRF is suitable for elemental analysis of food, since it provides simultaneous multi-elemental identification in a wide dynamic range of concentrations. Several different matrices may be analyzed obtaining results with a good precision and accuracy. In this review, the most recent literature about the use of TXRF for the analysis of food is reported. The focus is placed on the applications within food quality monitoring of drinks, beverages, vegetables, fruits, cereals, animal derivatives and dietary supplements. Furthermore, this paper provides a critical outlook on the developments required to transfer these methods from research to the industrial and analytical laboratories contexts.

A New Method for a Virtue-Based Responsible Conduct of Research Curriculum: Pilot Test Results.

PubMed

Berling, Eric; McLeskey, Chet; O'Rourke, Michael; Pennock, Robert T

2018-02-03

Drawing on Pennock's theory of scientific virtues, we are developing an alternative curriculum for training scientists in the responsible conduct of research (RCR) that emphasizes internal values rather than externally imposed rules. This approach focuses on the virtuous characteristics of scientists that lead to responsible and exemplary behavior. We have been pilot-testing one element of such a virtue-based approach to RCR training by conducting dialogue sessions, modeled upon the approach developed by Toolbox Dialogue Initiative, that focus on a specific virtue, e.g., curiosity and objectivity. During these structured discussions, small groups of scientists explore the roles they think the focus virtue plays and should play in the practice of science. Preliminary results have shown that participants strongly prefer this virtue-based model over traditional methods of RCR training. While we cannot yet definitively say that participation in these RCR sessions contributes to responsible conduct, these pilot results are encouraging and warrant continued development of this virtue-based approach to RCR training.

Historical trace element distribution in sediments from the Mississippi River delta

USGS Publications Warehouse

Swarzenski, P.W.; Baskaran, M.; Rosenbauer, R.J.; Orem, W.H.

2006-01-01

Five sediment cores were collected on the shelf of the inner Mississippi Bight in June 2003 for a suite of radionuclides to establish geochronologies and trace elements to examine patterns of contaminant deposition and accumulation. Core sites were chosen to reflect a matrix of variable water depths, proximity to the Mississippi River mouth as the primary source for terrigenous particles, and extent and duration of summertime water column hypoxia. The vertical distribution of 239,240Pu and 210Pbxs (= 210Pbtotal - 226Ra) provided reliable geochronological age constraints to develop models for mass accumulation rates and historic trace element inputs and variations. Mass accumulation rates ranged from 0.27 to 0.87 g cm-2 yr-1 and were internally consistent using either 210Pbxs or 239,240Pu. Measured inventories of 137Cs, 239,240Pu, and 210Pbxs were compared to atmospheric deposition rates to quantify potential sediment focusing or winnowing. Observed variability in calculated mass accumulation rates may be attributed foremost to site-specific proximity to the river mouth (i.e., sediment source), variability in water depth, and enhanced sediment focusing at the Mississippi River canyon site. Trace element concentrations were first normalized to Al, and then Al-normalized enrichment factors (ANEF) were calculated based on preanthropogenic and crustal trace element abundances. These ANEFs were typically > 1 for V and Ba, while for most other elements studied, either no enrichment or depletion was observed. The enrichment of Ba may be related, in part, to the seasonal occurrence of oxygen-depleted subsurface waters off the Mississippi River delta, as well as being an ubiquitous by-product of the petroleum industry. ?? 2006 Estuarine Research Federation.

Standardized cardiovascular data for clinical research, registries, and patient care: a report from the Data Standards Workgroup of the National Cardiovascular Research Infrastructure project.

PubMed

Anderson, H Vernon; Weintraub, William S; Radford, Martha J; Kremers, Mark S; Roe, Matthew T; Shaw, Richard E; Pinchotti, Dana M; Tcheng, James E

2013-05-07

Relatively little attention has been focused on standardization of data exchange in clinical research studies and patient care activities. Both are usually managed locally using separate and generally incompatible data systems at individual hospitals or clinics. In the past decade there have been nascent efforts to create data standards for clinical research and patient care data, and to some extent these are helpful in providing a degree of uniformity. Nonetheless, these data standards generally have not been converted into accepted computer-based language structures that could permit reliable data exchange across computer networks. The National Cardiovascular Research Infrastructure (NCRI) project was initiated with a major objective of creating a model framework for standard data exchange in all clinical research, clinical registry, and patient care environments, including all electronic health records. The goal is complete syntactic and semantic interoperability. A Data Standards Workgroup was established to create or identify and then harmonize clinical definitions for a base set of standardized cardiovascular data elements that could be used in this network infrastructure. Recognizing the need for continuity with prior efforts, the Workgroup examined existing data standards sources. A basic set of 353 elements was selected. The NCRI staff then collaborated with the 2 major technical standards organizations in health care, the Clinical Data Interchange Standards Consortium and Health Level Seven International, as well as with staff from the National Cancer Institute Enterprise Vocabulary Services. Modeling and mapping were performed to represent (instantiate) the data elements in appropriate technical computer language structures for endorsement as an accepted data standard for public access and use. Fully implemented, these elements will facilitate clinical research, registry reporting, administrative reporting and regulatory compliance, and patient care. Copyright © 2013 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

FOCUS: Essential Elements of Quality for State-Funded Preschool Programs

ERIC Educational Resources Information Center

New Mexico Public Education Department, 2016

2016-01-01

The "FOCUS: Essential Elements of Quality, New Mexico's Tiered Quality Rating and Improvement System (TQRIS)," provides early childhood program personnel with the criteria, tools, and resources they need to improve the quality of their program. These quality improvements focus on children's growth, development, and learning--so that each…

The group engagement model: procedural justice, social identity, and cooperative behavior.

PubMed

Tyler, Tom R; Blader, Steven L

2003-01-01

The group engagement model expands the insights of the group-value model of procedural justice and the relational model of authority into an explanation for why procedural justice shapes cooperation in groups, organizations, and societies. It hypothesizes that procedures are important because they shape people's social identity within groups, and social identity in turn influences attitudes, values, and behaviors. The model further hypothesizes that resource judgments exercise their influence indirectly by shaping social identity. This social identity mediation hypothesis explains why people focus on procedural justice, and in particular on procedural elements related to the quality of their interpersonal treatment, because those elements carry the most social identity-relevant information. In this article, we review several key insights of the group engagement model, relate these insights to important trends in psychological research on justice, and discuss implications of the model for the future of procedural justice research.

Experimental and finite element investigation of the buckling characteristics of a beaded skin panel for a hypersonic aircraft. Ph.D. Thesis. Final Report

NASA Technical Reports Server (NTRS)

Siegel, W. H.

1978-01-01

As part of NASA's continuing research into hypersonics and 85 square foot hypersonic wing test section of a proposed hypersonic research airplane was laboratory tested. The project reported on in this paper has carried the hypersonic wing test structure project one step further by testing a single beaded panel to failure. The primary interest was focused upon the buckling characteristics of the panel under pure compression with boundary conditions similar to those found in a wing mounted condition. Three primary phases of analysis are included in the report. These phases include: experimental testing of the beaded panel to failure; finite element structural analysis of the beaded panel with the computer program NASTRAN; a summary of the semiclassical buckling equations for the beaded panel under purely compressive loads. Comparisons between each of the analysis methods are also included.

Modeling The Frontal Collison In Vehicles And Determining The Degree Of Injury On The Driver

NASA Astrophysics Data System (ADS)

Oţăt, Oana Victoria

2015-09-01

The present research study aims at analysing the kinematic and the dynamic behaviour of the vehicle's driver in a frontal collision. Hence, a subsequent objective of the research paper is to establish the degree of injury suffered by the driver. Therefore, in order to achieve the objectives set, first, we had to define the type of the dummy placed in the position of the driver, and then to design the three-element assembly, i.e. the chair-steering wheel-dashboard assembly. Based on this model, the following step focused on the positioning of the dummy, which has also integrated the defining of the contacts between the components of the dummy and the seat elements. Seeking to model such a behaviour that would highly accurately reflect the driver's movements in a frontal collision, passive safety systems have also been defined and simulated, namely the seatbelt and the frontal airbag.

Nonlinear force feedback control of piezoelectric-hydraulic pump actuator for automotive transmission shift control

NASA Astrophysics Data System (ADS)

Kim, Gi-Woo; Wang, K. W.

2008-03-01

In recent years, researchers have investigated the feasibility of utilizing piezoelectric-hydraulic pump based actuation systems for automotive transmission controls. This new concept could eventually reduce the complexity, weight, and fuel consumption of the current transmissions. In this research, we focus on how to utilize this new approach on the shift control of automatic transmissions (AT), which generally requires pressure profiling for friction elements during the operation. To illustrate the concept, we will consider the 1--> 2 up shift control using band brake friction elements. In order to perform the actuation force tracking for AT shift control, nonlinear force feedback control laws are designed based on the sliding mode theory for the given nonlinear system. This paper will describe the modeling of the band brake actuation system, the design of the nonlinear force feedback controller, and simulation and experimental results for demonstration of the new concept.

What do We Know about Family Interventions for Psychosis at the Process Level? A Systematic Review.

PubMed

Grácio, Jaime; Gonçalves-Pereira, Manuel; Leff, Julian

2016-03-01

The evidence regarding effectiveness of family interventions for psychosis (FIP) is strong and consistent. However, there is a gap in the research on the process of these interventions, and little is known about their active ingredients. This review aims to identify the active ingredients of FIP. We conducted a systematic literature review, focusing on qualitative research, and analyzed 22 papers in total. We found a single study comprehensively exploring the process of FIP. All other studies focused on particular aspects of process-related variables. The key elements of FIP seem to be the so-called "common therapeutic factors", followed by education about the illness and coping skills training. This review supports the value of a stepped model of intervention according to the needs of the families. However, the evidence reviewed also reveals a gap in the research findings based on the limited research available. FIP are complex, psychosocial interventions with multiple components, and more intensive, qualitative research is needed to establish linkages between process and outcome. © 2015 Family Process Institute.

USDA Biochar Research: Land Application Advances to Reap Its Multifunctional Abilities

NASA Astrophysics Data System (ADS)

Ippolito, J.; Spokas, K.; Novak, J.; Lentz, R. D.; Stromberger, M.; Ducey, T.; Johnson, M.

2014-12-01

Biochar is the solid byproduct from the pyrolysis of agricultural crop residues, manures, green wastes and wood-based materials. Pyrolyzing biomass causes inorganic and organic compounds to be concentrated within the carbonized remains of the original lignin and cellulose structure. It is through this complex mixture of organic aromatic structures and inorganic elements that potentially imparts biochars with special multi-functional capabilities. Our current research has focused on developing biochar to simultaneously sequester soil carbon and remediate degraded soils. This is accomplished by directly improving soil nutrient and moisture contents, sorbing pollutants, as well as altering microbial signaling. Maintaining these improvements needs to account for biochar physical degradation, which may be overcome by biochar-mineral associations. Additional research is focused on biochar use that minimizes soil microorganism population shifts in order to maintain current ecosystem services. Future USDA research involves more evaluations to understand the multifunctional role of biochar in the agricultural and environmental sectors (e.g., USEPA superfund locations). This presentation will provide highlights of current and future coordinated biochar research efforts from several key laboratory locations across the US.

Current DOT research on the effect of multiple site damage on structural integrity

NASA Technical Reports Server (NTRS)

Tong, P.; Arin, Kemal; Jeong, David Y.; Greif, R.; Brewer, John C.; Bobo, Stephan N.; Sampath, Sam N.

1992-01-01

Multiple site damage (MSD) is a type of cracking that may be found in aging airplanes and which may adversely affect their continuing airworthiness. The Volpe National Transportation Systems Center has supported the Federal Aviation Administration Technical Center on structural integrity research for the past two and half years. The work has focused on understanding the behavior of MSD, detection of MSD during airframe inspection, and the avoidance of MSD in future designs. These three elements of the MSD problem are addressed and a summary of the completed work, the current status, and requirements for future research is provided.

Sensitive Interviewing in Qualitative Research.

PubMed

Dempsey, Laura; Dowling, Maura; Larkin, Philip; Murphy, Kathy

2016-12-01

In this paper we focus on important considerations when planning and conducting qualitative interviews on sensitive topics. Drawing on experiences of conducting interviews with dementia caregivers, a framework of essential elements in qualitative interviewing was developed to emphasize study participants' needs while also providing guidance for researchers. Starting with a definition of sensitive research, the framework includes preparing for interviews, interacting with gatekeepers of vulnerable groups, planning for interview timing, and location, building relationships and conducting therapeutic interactions, protecting ethically vulnerable participants, and planning for disengagement. This framework has the potential to improve the effectiveness of sensitive interviewing with vulnerable groups. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

[Activating therapeutic care in geriatrics : Evaluation of a practice concept].

PubMed

Acklau, Stefanie; Gödecker, Lisa; Kaden, Andrea; Jahn, Patrick

2016-10-01

The special feature of the concept of activating therapeutic care in geriatrics (ATP-G) is based on the focus of nursing and therapeutic elements specifically related to the elderly. Further significance lies in the bottom-up development of this concept, which shows a close proximity to the nursing practice. The research project targeted the characteristics of ATP-G from a nursing point of view. Furthermore, the resulting elements of professional nursing care understanding for inpatient geriatric rehabilitation were used to build a scientific and theoretical foundation of the ATP-G concept. In this study 12 semi-structured interviews with professional caregivers were realized. The data collection was undertaken in three different facilities of inpatient geriatric (early) rehabilitation, chosen by lot. The data analysis was based on the methodology of qualitative content analysis according to Mayring. The research project showed that the basic elements described in the ATP-G concept are consistent with the view of nursing practitioners and therefore reflect the characteristic features of routine daily practice; nonetheless, some new aspects were found, primarily the importance of interdisciplinary teamwork in geriatric settings. There were also difficulties related to the ATP-G concept which were experienced as restraints by the questioned professionals. Further research should therefore investigate the structures for optimal implementation of the ATP-G concept into standard practice.

Characterization of materials formed by rice husk for construction

NASA Astrophysics Data System (ADS)

Portillo-Rodríguez, A. M.

2013-11-01

This review article delves into the use of agro-industrial wastes, which in construction field provides alternatives for environmental problems with the use of them. This fact enables development and lower costs for new options in the brick, cluster, mortar and concrete industry, what represents benefits for environment, housing and generally everything related to construction, looking for sustainability. For that reason a literature review is made to support the theme focusing on the use of rice husk in its natural, ground or ash state for manufacturing elements with clay masonry, precast and optimization of concrete and mortars. The technique used is based on scientific articles and researches found in reliable databases that were analyzed and integrated into a synthesized structure, which summarized the objectives, analysis processes, the physical and mechanical properties and finally the results. The conclusions are focused on potentiality of elements production in the construction development based on the high effectiveness like thermal insulation, low density and various benefits offered by high silica content pozzolanic properties, etc.

Computational Aspects of Sensitivity Calculations in Linear Transient Structural Analysis. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Greene, William H.

1989-01-01

A study has been performed focusing on the calculation of sensitivities of displacements, velocities, accelerations, and stresses in linear, structural, transient response problems. One significant goal was to develop and evaluate sensitivity calculation techniques suitable for large-order finite element analyses. Accordingly, approximation vectors such as vibration mode shapes are used to reduce the dimensionality of the finite element model. Much of the research focused on the accuracy of both response quantities and sensitivities as a function of number of vectors used. Two types of sensitivity calculation techniques were developed and evaluated. The first type of technique is an overall finite difference method where the analysis is repeated for perturbed designs. The second type of technique is termed semianalytical because it involves direct, analytical differentiation of the equations of motion with finite difference approximation of the coefficient matrices. To be computationally practical in large-order problems, the overall finite difference methods must use the approximation vectors from the original design in the analyses of the perturbed models.

Anopheline Reproductive Biology: Impacts on Vectorial Capacity and Potential Avenues for Malaria Control.

PubMed

Mitchell, Sara N; Catteruccia, Flaminia

2017-12-01

Vectorial capacity is a mathematical approximation of the efficiency of vector-borne disease transmission, measured as the number of new infections disseminated per case per day by an insect vector. Multiple elements of mosquito biology govern their vectorial capacity, including survival, population densities, feeding preferences, and vector competence. Intriguingly, biological pathways essential to mosquito reproductive fitness directly or indirectly influence a number of these elements. Here, we explore this complex interaction, focusing on how the interplay between mating and blood feeding in female Anopheles not only shapes their reproductive success but also influences their ability to sustain Plasmodium parasite development. Central to malaria transmission, mosquito reproductive biology has recently become the focus of research strategies aimed at malaria control, and we discuss promising new methods based on the manipulation of key reproductive steps. In light of widespread resistance to all public health-approved insecticides targeting mosquito reproduction may prove crucial to the success of malaria-eradication campaigns. Copyright © 2017 Cold Spring Harbor Laboratory Press; all rights reserved.

The influence of printing parameters on selected mechanical properties of FDM/FFF 3D-printed parts

NASA Astrophysics Data System (ADS)

Ćwikła, G.; Grabowik, C.; Kalinowski, K.; Paprocka, I.; Ociepka, P.

2017-08-01

Rapid Prototyping technologies, especially 3D printing are becoming increasingly popular due to their usability and the constant decrease in price of printing equipment and materials. The article focuses on the study of selected mechanical strength properties of 3D-printed elements, which are not very important if the element is only a model for further manufacturing techniques, but which are important when 3D-printed elements will be a part of a functioning device, e.g. a part of unique scientific equipment. The research was carried out on a set of standardised samples, printed with low-cost standard materials (ABS), using a cheap 3D printer. The influence of parameters (such as the type of infill pattern, infill density, shell thickness, printing temperature, the type of material) on selected mechanical properties of the samples, were tested. The obtained results allows making conscious decisions on the printing of elements to be durable enough, either on a non-professional printer, or when to ordered by a professional manufacturer.

Integrating utilization-focused evaluation with business process modeling for clinical research improvement.

PubMed

Kagan, Jonathan M; Rosas, Scott; Trochim, William M K

2010-10-01

New discoveries in basic science are creating extraordinary opportunities to design novel biomedical preventions and therapeutics for human disease. But the clinical evaluation of these new interventions is, in many instances, being hindered by a variety of legal, regulatory, policy and operational factors, few of which enhance research quality, the safety of study participants or research ethics. With the goal of helping increase the efficiency and effectiveness of clinical research, we have examined how the integration of utilization-focused evaluation with elements of business process modeling can reveal opportunities for systematic improvements in clinical research. Using data from the NIH global HIV/AIDS clinical trials networks, we analyzed the absolute and relative times required to traverse defined phases associated with specific activities within the clinical protocol lifecycle. Using simple median duration and Kaplan-Meyer survival analysis, we show how such time-based analyses can provide a rationale for the prioritization of research process analysis and re-engineering, as well as a means for statistically assessing the impact of policy modifications, resource utilization, re-engineered processes and best practices. Successfully applied, this approach can help researchers be more efficient in capitalizing on new science to speed the development of improved interventions for human disease.

Quality management and the work environment: an empirical investigation in a public sector organization.

PubMed

Taveira, Alvaro D; James, Craig A; Karsh, Ben -Tzion; Sainfort, François

2003-07-01

The integration of quality management initiatives, particularly total quality management (TQM), and ergonomics has received increasing attention from scholars and practitioners. Above all, the question of how TQM programs relate to ergonomic aspects of organizational design and culture is at the center of this discussion. This study examines how elements of a "typical", Deming-inspired, TQM program in the public sector interact with the work environment. Elements of the TQM program were defined and measured using the Malcom Baldridge Award criteria. The specific elements examined were "Management Support of Quality", "Information and Analysis", "Human Resources", "Processes and Quality Results", and "Customer Focus and Satisfaction". The relationship between these TQM elements and the work environment were defined through five separate hypotheses. The work environment was described by the constructs "Supervisor Support", "Task Clarity", "Task Orientation", and "Innovation". Data were obtained through survey questionnaires administered to employees of four departments in a municipal government organization. Results supported three of the hypotheses, but produced some unanticipated outcomes with regard to the other two. Namely, "Management Support of Quality" was significantly related to "Supervisor Support", "Task Orientation", "Task Clarity" and "Innovation"; "Human Resources" was significantly related to "Supervisor Support"; "Processes and Quality Results" was significantly related to "Task Orientation" and "Innovation". Contrary to predicted "Information and Analysis" was negatively related to "Innovation", and "Customer Focus" was unrelated to any of the outcome variables. The relationships between these TQM elements and work environment dimensions are discussed. Implications for TQM and ergonomic practice are analyzed, and directions for future research proposed.

Aphorisms and Short Phrases as Pieces of Knowledge in the Pedagogical Framework of the Andalusian School of Public Health

PubMed Central

González-García, Lorena; Chemello, Clarice; García-Sánchez, Filomena; Serpa-Anaya, Delia C.; Gómez-González, Carmen; Soriano-Carrascosa, Leticia; Muñoz-de Rueda, Paloma; Moya-Molina, Miguel; Sánchez-García, Fernando; Ortega-Calvo, Manuel

2012-01-01

Background: Bearing in mind the philosophical pedagogical significance of short phrases for the training of researchers in the health care ambit, we hence have studied the aphorisms and striking phrases expressed during the epidemiology course at the Andalusian School of Public Health. Methods: Belonging to the qualitative type and applied through the establishment of a multidisciplinary focus group made up of ten post-graduated students, where one of them acted as a moderator. The collection of information lasted four months. Information was classified in two ways: Firstly, aphorisms and short phrases with a pedagogical impact; and secondly, data with statistical, epidemiological, epistemological, pragmatic, or heuristic component, and for scientific diffusion. It was decided to perform a triangulation that included a descriptive presentation and a basic categorical analysis. The two teachers with a highest interpretative load have been identified . Results: A total of 127 elements, regarded as of interest by the focus group, were collected. Forty-four of them (34.6%) were aphorisms, and 83 were short phrases with a pedagogical load (65.3%). Most of all them were classified as statistical elements (35.4%) followed by epistemological (21.3%) and epidemiological (15.7%) elements. There was no tendency towards aphorisms or short phrases (P > 0.05) among the teachers with more informative representation. Conclusion: There has been a tilt in the contents towards the statistical area to the detriment of the epidemiological one. Concept maps have visualized classifications. This sort of qualitative analysis helps the researcher review contents acquired during his/her training process. PMID:22448313

Study on various elements of the geosciences with respect to space technology

NASA Technical Reports Server (NTRS)

Head, J. W., III

1981-01-01

The utility of data acquired in space for both basic and applied studies of the geology of the Earth was evaluated. Focus was placed upon the gaps in the current ability to make effective use of remote sensing technology within the Earth sciences. A long range plan is presented for future research that involves an appropriate balance between the development and application of space techniques.

Mixed Methods Design Study Investigating the Use of a Music Authentic Performance Assessment Tool by High School Band Directors to Measure Student Musical Growth

ERIC Educational Resources Information Center

Beason, Christine F.

2017-01-01

This research project was designed to determine if the Model Cornerstone Assessment for Performance, Proficient level, published by the National Association for Music Education would be an appropriate tool to use to demonstrate student growth as one element of teacher evaluations, specifically the T-TESS. This study focused on four main research…

Reexamining Ground SOF Command and Control: Does One Size Fit All

DTIC Science & Technology

2016-12-01

Case studies covering varying methods of employment of special operations forces in limited contingencies will be utilized. The case studies focus on ...operating environment, much like an open organization. This research examines three case studies including operation JUST CAUSE in Panama, RESTORE HOPE in... case studies , the HQ elements formed around existing homogenous commands and not a Theater Special Operations Command (TSOC) staff with limited

What the Words Do Not Say: SFS for Children under the Light of Social Semiotic Theory Case Study--'Horis sosivio'

ERIC Educational Resources Information Center

Dermata, Katerina; Skarpelos, Yannis

2017-01-01

The research on short stories for children has focused in Greece mostly on their literary, pedagogical, linguistic and educational aspects. This paper attempts to approach Short Form Stories for children under the light of social semiotics, the main elements being the author's choices in sign-creation process and its interpretation by the reader.…

Teacher or Coach? How Logics from the Field of Sports Contribute to the Construction of Knowledge in Physical Education Teacher Education Pedagogical Discourse through Educational Texts

ERIC Educational Resources Information Center

Svendsen, Annemari Munk; Svendsen, Jesper Tinggaard

2016-01-01

The main purpose of this paper is to focus attention on educational texts as central conveyers of discourses of sport into physical education teacher education (PETE) and by extension into physical education (PE). A considerable volume of research suggests that sport and games continue to be dominant elements of curriculum and practice in…

Relevant patient perceptions and experiences for evaluating quality of interaction with physiotherapists during outpatient rehabilitation: a qualitative study.

PubMed

Del Baño-Aledo, M Elena; Medina-Mirapeix, Francesc; Escolar-Reina, Pilar; Montilla-Herrador, Joaquina; Collins, Sean M

2014-03-01

To identify elements of the physiotherapist-patient interaction considered by patients when they evaluate the quality of care in outpatient rehabilitation settings. A qualitative study with nine focus groups, Two researchers conducted the focus groups, and a topic guide with predetermined questions was used. Each group discussion was audiotaped,, transcribed verbatim and analyzed thematically according to a modified grounded theory approach. Three postacute ambulatory centers in Barcelona, Madrid and Seville (Spain). Fifty-seven adults undergoing outpatient rehabilitation for musculoskeletal conditions/injuries. Patients based their evaluations of quality of care on their assessment of physiotherapists' willingness to provide information and education, technical expertise and interpersonal manners (eg. respect, emotional support and sensitivity changes in the patient's status). Both positive and negative aspects of the physiotherapist-patient interaction emerged under all these themes, except for friendly and respectful communication. This study identified which elements of the physiotherapist-patient interaction are considered by patients when evaluating the quality of care in rehabilitation outpatient settings. Further research should work to develop self-report questionnaires about patients' experiences of the physiotherapist-patient interaction in rehabilitation services to provide empirical and quantitative evidence. Copyright © 2013 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.

Lean Management Systems in Radiology: Elements for Success.

PubMed

Schultz, Stacy R; Ruter, Royce L; Tibor, Laura C

2016-01-01

This article is a review of the literature on Lean and Lean Management Systems and how they have been implemented in healthcare organizations and particularly in radiology departments. The review focuses on the elements required for a successful implementation of Lean by applying the principles of a Lean Management System instead of a Lean tools-only approach. This review shares the successes and failures from healthcare organizations' efforts to improve the quality and safety of the services they provide. There are a limited number of healthcare organizations in the literature who have shared their experiences and additional research is necessary to determine whether a Lean Management System is a viable alternative to the current management structure in healthcare.

Participation in Clinical Research Registries: A Focus Group Study Examining Views From Patients With Arthritis and Other Chronic Illnesses.

PubMed

Lee, Sara B; Zak, Agnes; Iversen, Maura D; Polletta, Valerie L; Shadick, Nancy A; Solomon, Daniel H

2016-07-01

Patient registries have contributed substantially to progress in clinical research in rheumatic diseases. However, not much is known about how to optimize the patient experience in such registries. We assessed patient views, motivations, and potential barriers towards participation in registry research to better understand how registries can be improved to maximize patient engagement. Focus groups were held with 23 patients (mean ± SD age 59 ± 13 years) from the Boston area and led by a bilingual moderator trained in focus group methodology, using a semistructured moderator guide. Three separate focus groups were conducted to thematic saturation: patients with rheumatoid arthritis (RA) who had registry experience, patients with any chronic illness, and Spanish-speaking patients with RA or osteoarthritis. Patients in the latter 2 groups had no prior registry experience. Focus groups were audiotaped and transcribed. Four researchers independently analyzed transcripts using open data coding to identify themes. A normative group process was used to consolidate and refine themes. Seven major themes were identified, including personalization/convenience of data collection, trust and confidentiality, camaraderie, learning about yourself and your disease, altruism, material motivators, and capturing mental health and other elements of the lived experience. We observed distinct differences in the discussion content of the Spanish-speaking patients compared to the English-speaking patients. This study identified patient attitudes towards registry research among those with and without prior experience in a registry. The results provide insight into strategies for registry design to maximize patient engagement, which can lead to more robust registry data. © 2016, American College of Rheumatology.

Socialization of Japanese nursing students.

PubMed

Condon, Eileen; Sharts-Hopko, Nancy

2010-01-01

An important focus of nursing education research is the acquisition of values, behaviors, and attitudes that will influence a nurse's professional role. In this qualitative study, the process of professional socialization among Japanese nursing students was investigated. Interviews with nursing students and faculty members in Tokyo revealed that socialization of nursing students is a multidimensional process, with classroom experiences, clinical practice, and extracurricular elements all having an influence. Six themes emerged from the data: openness to others, communication, team building, reflection, extracurricular networking, and focused education. Although communication and clinical experiences are limited by cultural norms, students become socialized to the nursing profession through various other means.

The application of mixed methods designs to trauma research.

PubMed

Creswell, John W; Zhang, Wanqing

2009-12-01

Despite the use of quantitative and qualitative data in trauma research and therapy, mixed methods studies in this field have not been analyzed to help researchers designing investigations. This discussion begins by reviewing four core characteristics of mixed methods research in the social and human sciences. Combining these characteristics, the authors focus on four select mixed methods designs that are applicable in trauma research. These designs are defined and their essential elements noted. Applying these designs to trauma research, a search was conducted to locate mixed methods trauma studies. From this search, one sample study was selected, and its characteristics of mixed methods procedures noted. Finally, drawing on other mixed methods designs available, several follow-up mixed methods studies were described for this sample study, enabling trauma researchers to view design options for applying mixed methods research in trauma investigations.

Broadband diffractive lens or imaging element

DOEpatents

Ceglio, Natale M.; Hawryluk, Andrew M.; London, Richard A.; Seppala, Lynn G.

1991-01-01

A broadband diffractive lens or imaging element produces a sharp focus and/or a high resolution image with broad bandwidth illuminating radiation. The diffractive lens is sectored or segmented into regions, each of which focuses or images a distinct narrowband of radiation but all of which have a common focal length. Alternatively, a serial stack of minus filters, each with a diffraction pattern which focuses or images a distinct narrowband of radiation but all of which have a common focal length, is used. The two approaches can be combined. Multifocal broadband diffractive elements can also be formed.

Toward a view-oriented approach for aligning RDF-based biomedical repositories.

PubMed

Anguita, A; García-Remesal, M; de la Iglesia, D; Graf, N; Maojo, V

2015-01-01

This article is part of the Focus Theme of METHODS of Information in Medicine on "Managing Interoperability and Complexity in Health Systems". The need for complementary access to multiple RDF databases has fostered new lines of research, but also entailed new challenges due to data representation disparities. While several approaches for RDF-based database integration have been proposed, those focused on schema alignment have become the most widely adopted. All state-of-the-art solutions for aligning RDF-based sources resort to a simple technique inherited from legacy relational database integration methods. This technique - known as element-to-element (e2e) mappings - is based on establishing 1:1 mappings between single primitive elements - e.g. concepts, attributes, relationships, etc. - belonging to the source and target schemas. However, due to the intrinsic nature of RDF - a representation language based on defining tuples < subject, predicate, object > -, one may find RDF elements whose semantics vary dramatically when combined into a view involving other RDF elements - i.e. they depend on their context. The latter cannot be adequately represented in the target schema by resorting to the traditional e2e approach. These approaches fail to properly address this issue without explicitly modifying the target ontology, thus lacking the required expressiveness for properly reflecting the intended semantics in the alignment information. To enhance existing RDF schema alignment techniques by providing a mechanism to properly represent elements with context-dependent semantics, thus enabling users to perform more expressive alignments, including scenarios that cannot be adequately addressed by the existing approaches. Instead of establishing 1:1 correspondences between single primitive elements of the schemas, we propose adopting a view-based approach. The latter is targeted at establishing mapping relationships between RDF subgraphs - that can be regarded as the equivalent of views in traditional databases -, rather than between single schema elements. This approach enables users to represent scenarios defined by context-dependent RDF elements that cannot be properly represented when adopting the currently existing approaches. We developed a software tool implementing our view-based strategy. Our tool is currently being used in the context of the European Commission funded p-medicine project, targeted at creating a technological framework to integrate clinical and genomic data to facilitate the development of personalized drugs and therapies for cancer, based on the genetic profile of the patient. We used our tool to integrate different RDF-based databases - including different repositories of clinical trials and DICOM images - using the Health Data Ontology Trunk (HDOT) ontology as the target schema. The importance of database integration methods and tools in the context of biomedical research has been widely recognized. Modern research in this area - e.g. identification of disease biomarkers, or design of personalized therapies - heavily relies on the availability of a technical framework to enable researchers to uniformly access disparate repositories. We present a method and a tool that implement a novel alignment method specifically designed to support and enhance the integration of RDF-based data sources at schema (metadata) level. This approach provides an increased level of expressiveness compared to other existing solutions, and allows solving heterogeneity scenarios that cannot be properly represented using other state-of-the-art techniques.

Trace elements in groundwater used for water supply in Latvia

NASA Astrophysics Data System (ADS)

Retike, Inga; Kalvans, Andis; Babre, Alise; Kalvane, Gunta; Popovs, Konrads

2014-05-01

Latvia is rich with groundwater resources of various chemical composition and groundwater is the main drinking source. Groundwater quality can be easily affected by pollution or overexploitation, therefore drinking water quality is an issue of high importance. Here the first attempt is made to evaluate the vast data base of trace element concentrations in groundwater collected by Latvian Environment, Geology and Meteorology Centre. Data sources here range from National monitoring programs to groundwater resources prospecting and research projects. First available historical records are from early 1960, whose quality is impossible to test. More recent systematic research has been focused on the agricultural impact on groundwater quality (Levins and Gosk, 2007). This research was mainly limited to Quaternary aquifer. Monitoring of trace elements arsenic, cadmium and lead was included in National groundwater monitoring program of Latvia in 2008 and 2009, but due to lack of funding the monitoring was suspended until 2013. As a result there are no comprehensive baseline studies regarding the trace elements concentration in groundwater. The aim of this study is to determine natural major and trace element concentration in aquifers mainly used for water supply in Latvia and to compare the results with EU potable water standards. A new overview of artesian groundwater quality will be useful for national and regional planning documents. Initial few characteristic traits of trace element concentration have been identified. For example, elevated fluorine, strontium and lithium content can be mainly associated with gypsum dissolution, but the highest barium concentrations are found in groundwaters with low sulphate content. The groundwater composition data including trace element concentrations originating from heterogeneous sources will be processed and analyzed as a part of a newly developed geologic and hydrogeological data management and modeling system with working name "GeoVipum". This study is supported by the European Social Fund project Nr.2013/0054/2DP/2.1.1.1.0/13/APIA/VIAA/007 in Latvia and European Social Fund Mobilitas grant No MJD309 in Estonia. Reference: Levins I., Gosk, E. 2007. Trace elements in groundwater as indicators of anthropogenic impact. Environmental Geology, 55, 285-290.

Watershed management and organizational dynamics: nationwide findings and regional variation

USGS Publications Warehouse

Clark, B.T.; Burkardt, N.; King, M.D.

2005-01-01

Recent attention has focused on resource management initiatives at the watershed scale with emphasis on collaborative, locally driven, and decentralized institutional arrangements. Existing literature on limited selections of well-established watershed-based organizations has provided valuable insights. The current research extends this focus by including a broad survey of watershed organizations from across the United States as a means to estimate a national portrait. Organizational characteristics include year of formation, membership size and composition, budget, guiding principles, and mechanisms of decision-making. These characteristics and the issue concerns of organizations are expected to vary with respect to location. Because this research focuses on organizations that are place based and stakeholder driven, the forces driving them are expected to differ across regions of the country. On this basis of location, we suggest basic elements for a regional assessment of watershed organizations to channel future research and to better approximate the organizational dynamics, issue concerns, and information needs unique to organizations across the country. At the broadest level, the identification of regional patterns or organizational similarities may facilitate the linkage among organizations to coordinate their actions at the much broader river basin or ecosystem scale.

Watershed management and organizational dynamics: nationwide findings and regional variation.

PubMed

Clark, Brad T; Burkardt, Nina; King, Dawn

2005-08-01

Recent attention has focused on resource management initiatives at the watershed scale with emphasis on collaborative, locally driven, and decentralized institutional arrangements. Existing literature on limited selections of well-established watershed-based organizations has provided valuable insights. The current research extends this focus by including a broad survey of watershed organizations from across the United States as a means to estimate a national portrait. Organizational characteristics include year of formation, membership size and composition, budget, guiding principles, and mechanisms of decision-making. These characteristics and the issue concerns of organizations are expected to vary with respect to location. Because this research focuses on organizations that are place based and stakeholder driven, the forces driving them are expected to differ across regions of the country. On this basis of location, we suggest basic elements for a regional assessment of watershed organizations to channel future research and to better approximate the organizational dynamics, issue concerns, and information needs unique to organizations across the country. At the broadest level, the identification of regional patterns or organizational similarities may facilitate the linkage among organizations to coordinate their actions at the much broader river basin or ecosystem scale.

Barriers to Considering Ethical and Societal Implications of Research: Perceptions of Life Scientists.

PubMed

McCormick, Jennifer Blair; Boyce, Angie M; Ladd, Jennifer M; Cho, Mildred

2012-01-01

BACKGROUND: As part of an empirical study investigating how life scientists think about ethical and societal implications of their work, and about life science research in general, we sought to elucidate barriers that scientists might face in considering such implications. METHOD: Between 2005 and 2007, we conducted a study consisting of phone interviews, focus groups, and a national survey of life scientists at biomedical research institutions. The study population included graduate students, postdoctoral fellows, faculty, clinical instructors, and research staff. We analyzed data through qualitative and quantitative methods. RESULTS: In analyzing the data, we found that life scientists do, in fact, face barriers to considering ethical and societal implications of research. We categorized these barriers as falling into four broad domains: (1) lack of awareness of ethical and societal implications; (2) lack of relevance of such concerns to their specific research; (3) self-confidence in their ability to resolve such concerns; and (4) aspects of the daily practice of science itself. CONCLUSIONS: Life science researchers experience elements inherent in their training and in the conduct of science as barriers to thinking about ethical and societal implications related to their work. These findings suggest areas in which research ethics educators, bioethicists, and the scientific community can focus their efforts to improve social and ethical accountability in research.

Finite element analysis of human joints

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bossart, P.L.; Hollerbach, K.

1996-09-01

Our work focuses on the development of finite element models (FEMs) that describe the biomechanics of human joints. Finite element modeling is becoming a standard tool in industrial applications. In highly complex problems such as those found in biomechanics research, however, the full potential of FEMs is just beginning to be explored, due to the absence of precise, high resolution medical data and the difficulties encountered in converting these enormous datasets into a form that is usable in FEMs. With increasing computing speed and memory available, it is now feasible to address these challenges. We address the first by acquiringmore » data with a high resolution C-ray CT scanner and the latter by developing semi-automated method for generating the volumetric meshes used in the FEM. Issues related to tomographic reconstruction, volume segmentation, the use of extracted surfaces to generate volumetric hexahedral meshes, and applications of the FEM are described.« less

Organisational performance and business continuity management: a theoretical perspective and a case study.

PubMed

Sawalha, Ihab Hanna Salman

2013-01-01

This paper seeks to extend the research relating to the strategic view of business continuity management (BCM) to the context of organisational performance (OP). It discusses potential performance consequences resulting from applying BCM aspects/elements within an organisation. The paper contributes to the understanding of the role of BCM in OP by discussing how deployment of BCM key aspects/elements can improve OP. Two main issues are discussed: first, background to performance and the elements of OP; and secondly, the role of BCM in achieving optimised OP. These issues are significant, as they go further than the extant literature relating to the significance of BCM and its potential influence on OP. The study focuses on Jordanian banks as a case study and as a way of illustrating how BCM helps improve OP for those organisations facing performance shortcomings or difficulties.

Finite element modelling of crash response of composite aerospace sub-floor structures

NASA Astrophysics Data System (ADS)

McCarthy, M. A.; Harte, C. G.; Wiggenraad, J. F. M.; Michielsen, A. L. P. J.; Kohlgrüber, D.; Kamoulakos, A.

Composite energy-absorbing structures for use in aircraft are being studied within a European Commission research programme (CRASURV - Design for Crash Survivability). One of the aims of the project is to evaluate the current capabilities of crashworthiness simulation codes for composites modelling. This paper focuses on the computational analysis using explicit finite element analysis, of a number of quasi-static and dynamic tests carried out within the programme. It describes the design of the structures, the analysis techniques used, and the results of the analyses in comparison to the experimental test results. It has been found that current multi-ply shell models are capable of modelling the main energy-absorbing processes at work in such structures. However some deficiencies exist, particularly in modelling fabric composites. Developments within the finite element code are taking place as a result of this work which will enable better representation of composite fabrics.

An Experimental Investigation of the Confluent Boundary Layer on a High-Lift System

NASA Technical Reports Server (NTRS)

Thomas, F. O.; Nelson, R. C.

1997-01-01

This paper describes a fundamental experimental investigation of the confluent boundary layer generated by the interaction of a leading-edge slat wake with the boundary layer on the main element of a multi-element airfoil model. The slat and airfoil model geometry are both fully two-dimensional. The research reported in this paper is performed in an attempt to investigate the flow physics of confluent boundary layers and to build an archival data base on the interaction of the slat wake and the main element wall layer. In addition, an attempt is made to clearly identify the role that slat wake / airfoil boundary layer confluence has on lift production and how this occurs. Although complete LDV flow surveys were performed for a variety of slat gap and overhang settings, in this report the focus is on two cases representing both strong and weak wake boundary layer confluence.

Cross-system nutrient transport: effects of locally-derived aeolian dust on oligotrophic lakes in West Greenland

NASA Astrophysics Data System (ADS)

Bullard, J. E.; Anderson, N. J.; McGowan, S.; Prater, C.; Watts, M.; Whitford, E.

2017-12-01

Terrestrially-derived nutrients can strongly affect production in aquatic environments. However, while some research has focused on nutrient delivery via hydrological inputs, the effects of atmospheric dry deposition are comparatively understudied. This paper examines the influence of aeolian-derived elements on water chemistry and microbial nutrient-limitation in oligotrophic lakes in West Greenland. Estimates of seasonal dust deposition and elemental leaching rates are combined with lake nutrient concentration measurements to establish the role of glacio-fluvial dust deposition in shaping nutrient stoichiometry of downwind lakes. The bioavailability of dust-associated elements is also explored using enzyme assays designed to indicate nutrient-limitation in microbial communities sampled across a dust deposition gradient. Together, these analyses demonstrate the importance of atmospheric dust inputs on hydrologically-isolated lakes found in arid high-latitude environments and demonstrate the need to better understand the role of aeolian deposition in cross-system nutrient transport.

Coupled structural, thermal, phase-change and electromagnetic analysis for superconductors, volume 1

NASA Technical Reports Server (NTRS)

Felippa, Carlos A.; Farhat, Charbel; Park, K. C.; Militello, Carmelo; Schuler, James J.

1993-01-01

This research program has dealt with the theoretical development and computer implementation of reliable and efficient methods for the analysis of coupled mechanical problems that involve the interaction of mechanical, thermal, phase-change and electromagnetic subproblems. The focus application has been the modeling of superconductivity and associated quantum-state phase-change phenomena. In support of this objective the work has addressed the following issues: (1) development of variational principles for finite elements; (2) finite element modeling of the electromagnetic problem; (3) coupling of thermal and mechanical effects; and (4) computer implementation and solution of the superconductivity transition problem. The research was carried out over the period September 1988 through March 1993. The main accomplishments have been: (1) the development of the theory of parametrized and gauged variational principles; (2) the application of those principled to the construction of electromagnetic, thermal and mechanical finite elements; and (3) the coupling of electromagnetic finite elements with thermal and superconducting effects; and (4) the first detailed finite element simulations of bulk superconductors, in particular the Meissner effect and the nature of the normal conducting boundary layer. The grant has fully supported the thesis work of one doctoral student (James Schuler, who started on January 1989 and completed on January 1993), and partly supported another thesis (Carmelo Militello, who started graduate work on January 1988 completing on August 1991). Twenty-three publications have acknowledged full or part support from this grant, with 16 having appeared in archival journals and 3 in edited books or proceedings.

Do adolescent delinquency and problem drinking share psychosocial risk factors? A literature review.

PubMed

Curcio, Angela L; Mak, Anita S; George, Amanda M

2013-04-01

Despite the prevalence and damaging effects of adolescent problem drinking, relative to delinquency, far less research has focused on drinking using an integrated theoretical approach. The aim of the current research was to review existing literature on psychosocial risk factors for delinquency and problem drinking, and explore whether integrating elements of social learning theory with an established psychosocial control theory of delinquency could explain adolescent problem drinking. We reviewed 71 studies published post-1990 with particular focus on articles that empirically researched risk factors for adolescent problem drinking and delinquency in separate and concurrent studies and meta-analytic reviews. We found shared risk factors for adolescent delinquency and problem drinking that are encompassed by an extension of psychosocial control theory. The potential of an extended psychosocial control theory providing a parsimonious theoretical approach to explaining delinquency, problem drinking and other adolescent problem behaviours, along with suggestions for future investigations, is discussed. Copyright © 2012 Elsevier Ltd. All rights reserved.

The Role of Glia in Stress: Polyamines and Brain Disorders

PubMed Central

Skatchkov, Serguei; Woodbury, Michel; Eaton, Misty

2014-01-01

Synopsis This review focuses on the roles of glia and polyamines (PAs) in brain function and dysfunction, highlighting how PAs are one of the principal differences between glia and neurons as they are surprisingly stored, but not synthesized, almost exclusively in glial cells from which they can be released to regulate neuronal synaptic activity. The review includes the novel role of PAs, such as putrescine (PUT), spermidine (SPD) and spermine (SPM) and their precursors and derivatives. However: (i) PAs have not yet been a focus of much glial research; (ii) PAs affect many neuronal and glial receptors, channels and transporters; (iii) PAs are therefore key elements in the development of many diseases and syndromes (iv) thus forming the rationale for PA and glia focused therapy for these conditions. PMID:25455070

Finite element simulation of core inspection in helicopter rotor blades using guided waves.

PubMed

Chakrapani, Sunil Kishore; Barnard, Daniel; Dayal, Vinay

2015-09-01

This paper extends the work presented earlier on inspection of helicopter rotor blades using guided Lamb modes by focusing on inspecting the spar-core bond. In particular, this research focuses on structures which employ high stiffness, high density core materials. Wave propagation in such structures deviate from the generic Lamb wave propagation in sandwich panels. To understand the various mode conversions, finite element models of a generalized helicopter rotor blade were created and subjected to transient analysis using a commercial finite element code; ANSYS. Numerical simulations showed that a Lamb wave excited in the spar section of the blade gets converted into Rayleigh wave which travels across the spar-core section and mode converts back into Lamb wave. Dispersion of Rayleigh waves in multi-layered half-space was also explored. Damage was modeled in the form of a notch in the core section to simulate a cracked core, and delamination was modeled between the spar and core material to simulate spar-core disbond. Mode conversions under these damaged conditions were examined numerically. The numerical models help in assessing the difficulty of using nondestructive evaluation for complex structures and also highlight the physics behind the mode conversions which occur at various discontinuities. Copyright © 2015 Elsevier B.V. All rights reserved.

Astrophysical Computation in Research, the Classroom and Beyond

NASA Astrophysics Data System (ADS)

Frank, Adam

2009-03-01

In this talk I review progress in the use of simulations as a tool for astronomical research, for education and public outreach. The talk will include the basic elements of numerical simulations as well as advances in algorithms which have led to recent dramatic progress such as the use of Adaptive Mesh Refinement methods. The scientific focus of the talk will be star formation jets and outflows while the educational emphasis will be on the use of advanced platforms for simulation based learning in lecture and integrated homework. Learning modules for science outreach websites such as DISCOVER magazine will also be highlighted.

Technology assessment and the Congress

NASA Technical Reports Server (NTRS)

Carpenter, R. A.

1972-01-01

The legislative branch is considered as the major focus for technology assessment, and the functions of the Congressional Research Service in supplying Congressmen with scientific and technological development is outlined, and the need for Congress to control, assess, and integrate the various and conflicting elements for the benefit of both technology and society is stressed. The organization of the Science Policy Research Division is mentioned, and its duties in gathering facts for the increased understanding by the members of Congress are indicated. Technology assessment aspects associated with congressional committees and hearings, adequacy of advice, trends in engineering education, and the public interest are also discussed.

Infrared Detector Activities at NASA Langley Research Center

NASA Technical Reports Server (NTRS)

Abedin, M. N.; Refaat, T. F.; Sulima, O. V.; Amzajerdian, F.

2008-01-01

Infrared detector development and characterization at NASA Langley Research Center will be reviewed. These detectors were intended for ground, airborne, and space borne remote sensing applications. Discussion will be focused on recently developed single-element infrared detector and future development of near-infrared focal plane arrays (FPA). The FPA will be applied to next generation space-based instruments. These activities are based on phototransistor and avalanche photodiode technologies, which offer high internal gain and relatively low noise-equivalent-power. These novel devices will improve the sensitivity of active remote sensing instruments while eliminating the need for a high power laser transmitter.

Environmental monitoring and research at the John F. Kennedy Space Center

NASA Technical Reports Server (NTRS)

Hall, C. R.; Hinkle, C. R.; Knott, W. M.; Summerfield, B. R.

1992-01-01

The Biomedical Operations and Research Office at the NASA John F. Kennedy Space Center has been supporting environmental monitoring and research since the mid-1970s. Program elements include monitoring of baseline conditions to document natural variability in the ecosystem, assessments of operations and construction of new facilities, and ecological research focusing on wildlife habitat associations. Information management is centered around development of a computerized geographic information system that incorporates remote sensing and digital image processing technologies along with traditional relational data base management capabilities. The proactive program is one in which the initiative is to anticipate potential environmental concerns before they occur and, by utilizing in-house expertise, develop impact minimization or mitigation strategies to reduce environmental risk.

Membrane-mirror-based autostereoscopic display for tele-operation and teleprescence applications

NASA Astrophysics Data System (ADS)

McKay, Stuart; Mair, Gordon M.; Mason, Steven; Revie, Kenneth

2000-05-01

An autostereoscopic display for telepresence and tele- operation applications has been developed at the University of Strathclyde in Glasgow, Scotland. The research is a collaborative effort between the Imaging Group and the Transparent Telepresence Research Group, both based at Strathclyde. A key component of the display is the directional screen; a 1.2-m diameter Stretchable Membrane Mirror is currently used. This patented technology enables large diameter, small f No., mirrors to be produced at a fraction of the cost of conventional optics. Another key element of the present system is an anthropomorphic and anthropometric stereo camera sensor platform. Thus, in addition to mirror development, research areas include sensor platform design focused on sight, hearing, research areas include sensor platform design focused on sight, hearing, and smell, telecommunications, display systems for all visual, aural and other senses, tele-operation, and augmented reality. The sensor platform is located at the remote site and transmits live video to the home location. Applications for this technology are as diverse as they are numerous, ranging from bomb disposal and other hazardous environment applications to tele-conferencing, sales, education and entertainment.

A novel design for maskless direct laser writing nanolithography: Combination of diffractive optical element and nonlinear absorption inorganic resists

NASA Astrophysics Data System (ADS)

Zha, Yikun; Wei, Jingsong; Gan, Fuxi

2013-09-01

Maskless laser direct writing lithography has been applied in the fabrication of optical elements and electric-optical devices. With the development of technology, the feature size of the elements and devices is required to reduce down to nanoscale. Increasing the numerical aperture of converging lens and shortening the laser wavelength are good methods to obtain the small spot and reduce the feature size to nanoscale, while this will cause the reduction of the depth of focus. The reduction of depth of focus will lead to some difficulties in the focusing and tracking servo controlling during the high speed laser direct writing lithography. In this work, the combination of the diffractive optical elements and the nonlinear absorption inorganic resist thin films cannot only extend the depth of focus, but also reduce the feature size of the lithographic marks down to nanoscale. By using the five-zone annular phase-only binary pupil filter as the diffractive optical elements and AgInSbTe as the nonlinear absorption inorganic resist thin film, the depth of focus cannot only extend to 7.39 times that of the focused spot, but also reduce the lithographic feature size down to 54.6 nm. The ill-effect of sidelobe on the lithography is also eliminated by the nonlinear reverse saturable absorption and the phase change threshold lithographic characteristics.

Consumer perspectives on assistive technology outcomes.

PubMed

Lenker, James A; Harris, Frances; Taugher, Mary; Smith, Roger O

2013-09-01

The current study explored domains of assistive technology (AT) device outcomes that are most valued by AT users. A secondary objective was to identify elements in the device acquisition process that affect outcomes. Focus groups were conducted at geographically dispersed locations within the USA. The groups were moderated by experienced AT practitioners who followed a detailed procedure emphasizing a nominal group facilitation technique. Twenty-four adult AT users, representing a range of ages and disability populations, participated in four focus groups. Many had over 15 years of experience with multiple device types. Qualitative analysis yielded 13 threads that embodied salient outcome domains (e.g. independence, subjective well-being, participation in work and school, cost-effectiveness) and key factors associated with the device acquisition process (e.g. lengthy periods of frustration, variable quality of service providers). Ironically, these data were evoked only after the term "outcomes" was omitted from focus group questions. AT outcomes studies are needed that report data regarding (a) the impact of AT on participation, (b) costs of AT provision and (c) key elements in the AT service delivery process. Future studies will be further strengthened to the extent that their methodologies actively assimilate consumer perspectives. Implications for Rehabilitation Consumers highly value the impact of AT devices on their independence, subjective well-being and participation in work and school. The process of acquiring assistive technology devices is often lengthy and frustrating for consumers. Future AT outcomes research should report descriptive data regarding service delivery processes, as well as long-term impacts for consumers. Practitioners and researchers should avoid the use of potentially confusing professional jargon when administering surveys to consumers.

Programmable diffractive optical elements for extending the depth of focus in ophthalmic optics

NASA Astrophysics Data System (ADS)

Romero, Lenny A.; Millán, María. S.; Jaroszewicz, Zbigniew; Kołodziejczyk, Andrzej

2015-01-01

The depth of focus (DOF) defines the axial range of high lateral resolution in the image space for object position. Optical devices with a traditional lens system typically have a limited DOF. However, there are applications such as in ophthalmology, which require a large DOF in comparison to a traditional optical system, this is commonly known as extended DOF (EDOF). In this paper we explore Programmable Diffractive Optical Elements (PDOEs), with EDOF, as an alternative solution to visual impairments, especially presbyopia. These DOEs were written onto a reflective liquid cystal on silicon (LCoS) spatial light modulator (SLM). Several designs of the elements are analyzed: the Forward Logarithmic Axicon (FLAX), the Axilens (AXL), the Light sword Optical Element (LSOE), the Peacock Eye Optical Element (PE) and Double Peacock Eye Optical Element (DPE). These elements focus an incident plane wave into a segment of the optical axis. The performances of the PDOEs are compared with those of multifocal lenses. In all cases, we obtained the point spread function and the image of an extended object. The results are presented and discussed.

Probabilistic structural analysis methods of hot engine structures

NASA Technical Reports Server (NTRS)

Chamis, C. C.; Hopkins, D. A.

1989-01-01

Development of probabilistic structural analysis methods for hot engine structures is a major activity at Lewis Research Center. Recent activities have focused on extending the methods to include the combined uncertainties in several factors on structural response. This paper briefly describes recent progress on composite load spectra models, probabilistic finite element structural analysis, and probabilistic strength degradation modeling. Progress is described in terms of fundamental concepts, computer code development, and representative numerical results.

Finite Element Model Optimization of the FalconSAT-5 Structural Engineering Model

DTIC Science & Technology

2009-03-01

for coupled loads analyses. To develop the FE tuning process, this research focuses on the United States Air Force Academy (USAFA) FalconSAT-5 SEM II...Kirtland Air Force Base (KAFB) were sufficient for design engineers to ensure compliance with launch loads. However, for the coupled loads analysis...OF THE AIR FORCE AIR UNIVERSITY AIR FORCE INSTITUTE OF TECHNOLOGY Wright-Patterson Air Force Base, Ohio APPROVED FOR PUBLIC RELEASE; DISTRIBUTION

Analysis of Production Constraints at NADEP Alameda; A TQL Approach

DTIC Science & Technology

1993-06-01

they will be worth. B. RESEARCH QUESTIONS Can production systems currently using TQL theory and Theory of Constraints (TOC) be improved strategically ...This thesis will have a broad scope in following a systems approach to TQL. Any element of the system that is strategically important to improve...point in time. Since time and money are finite, focusing on those issues that are strategically important, first, is the most successful way of employing

Focused Application Software for Ferrite Patch Antennas

DTIC Science & Technology

1999-10-01

Trott Mr. Rene D. Guidry Mr. Christopher G. Repesh 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Mission Research Corporation 147 John Sims...July 99 Contract Number: F49620-97-C-0022 SBIR Topic: AF96-003 MRC Project: 97054 Prepared by: Dr. Keith D. Trott , Mr. Rene D. Guidry, and Mr...application of recent innovations in the finite element (FE) method to the problem of modeling conformal antennas embedded in or on (substrate or

A Proposed Strategy for Research Misconduct Policy: A Review on Misconduct Management in Health Research System

PubMed Central

Djalalinia, Shirin; Owlia, Parviz; Malek Afzali, Hossein; Ghanei, Mostafa; Peykari, Niloofar

2016-01-01

Background: Today, with the rapid growth of scientific production, research misconduct has become a worldwide problem. This article is intended to introduce the successful experience on the management of research paper misconducts in the field of health research. Methods: Our aim was to design and develop the strategy for research misconduct policy. Focusing on the national regulatory system, we developed a hierarchical model for paper misconduct policy in all the medical sciences universities and their affiliated research units. Results: Through our regulatory policy for paper misconduct management, specific protocol was followed in the field of health research publications through which the capabilities of covering the four main elements of prevention, investigation, punishment, and correction have come together. Conclusions: Considering the proposed strategy, regarding the strengths and weaknesses, utilization of evaluation tool can be one of the best strategies to achieving the prospective of health research papers by 2025. PMID:27512558

A Proposed Strategy for Research Misconduct Policy: A Review on Misconduct Management in Health Research System.

PubMed

Djalalinia, Shirin; Owlia, Parviz; Malek Afzali, Hossein; Ghanei, Mostafa; Peykari, Niloofar

2016-01-01

Today, with the rapid growth of scientific production, research misconduct has become a worldwide problem. This article is intended to introduce the successful experience on the management of research paper misconducts in the field of health research. Our aim was to design and develop the strategy for research misconduct policy. Focusing on the national regulatory system, we developed a hierarchical model for paper misconduct policy in all the medical sciences universities and their affiliated research units. Through our regulatory policy for paper misconduct management, specific protocol was followed in the field of health research publications through which the capabilities of covering the four main elements of prevention, investigation, punishment, and correction have come together. Considering the proposed strategy, regarding the strengths and weaknesses, utilization of evaluation tool can be one of the best strategies to achieving the prospective of health research papers by 2025.

ENHANCING RESEARCH ETHICS REVIEW SYSTEMS IN EGYPT: THE FOCUS OF AN INTERNATIONAL TRAINING PROGRAM INFORMED BY AN ECOLOGICAL DEVELOPMENTAL APPROACH TO ENHANCING RESEARCH ETHICS CAPACITY

PubMed Central

Edwards, Hillary Anne; Hifnawy, Tamer; Silverman, Henry

2014-01-01

Recently, training programs in research ethics have been established to enhance individual and institutional capacity in research ethics in the developing world. However, commentators have expressed concern that the efforts of these training programs have placed “too great an emphasis on guidelines and research ethics review”, which will have limited effect on ensuring ethical conduct in research. What is needed instead is a culture of ethical conduct supported by national and institutional commitment to ethical practices that are reinforced by upstream enabling conditions (strong civil society, public accountability, and trust in basic transactional processes), which are in turn influenced by developmental conditions (basic freedoms of political freedoms, economic facilities, social opportunities, transparency guarantees, and protective security). Examining this more inclusive understanding of the determinants of ethical conduct enhances at once both an appreciation of the limitations of current efforts of training programs in research ethics and an understanding of what additional training elements are needed to enable trainees to facilitate national and institutional policy changes that enhance research practices. We apply this developmental model to a training program focused in Egypt to describe examples of such additional training activities. PMID:24894063

Enhancing Research Ethics Review Systems in Egypt: The Focus of an International Training Program Informed by an Ecological Developmental Approach to Enhancing Research Ethics Capacity.

PubMed

Edwards, Hillary Anne; Hifnawy, Tamer; Silverman, Henry

2015-12-01

Recently, training programs in research ethics have been established to enhance individual and institutional capacity in research ethics in the developing world. However, commentators have expressed concern that the efforts of these training programs have placed 'too great an emphasis on guidelines and research ethics review', which will have limited effect on ensuring ethical conduct in research. What is needed instead is a culture of ethical conduct supported by national and institutional commitment to ethical practices that are reinforced by upstream enabling conditions (strong civil society, public accountability, and trust in basic transactional processes), which are in turn influenced by developmental conditions (basic freedoms of political freedoms, economic facilities, social opportunities, transparency guarantees, and protective security). Examining this more inclusive understanding of the determinants of ethical conduct enhances at once both an appreciation of the limitations of current efforts of training programs in research ethics and an understanding of what additional training elements are needed to enable trainees to facilitate national and institutional policy changes that enhance research practices. We apply this developmental model to a training program focused in Egypt to describe examples of such additional training activities. © 2014 John Wiley & Sons Ltd.

Social marketing and breastfeeding: a literature review.

PubMed

Schmidt, Manuela

2013-02-08

Through the review of relevant literature this study illuminates the concepts of social marketing and breastfeeding. It specifically discusses the positioning of the link between social marketing and breastfeeding within different fields of study and develops a theoretical framework that tries to bridge the gap between those disciplines. Various electronic databases were used and through systematic selection 11 scientific articles were identified that this literature review is based on. The review indicates that the relationship between social marketing and breastfeeding is complex. There are indications that this relationship is being investigated within three distinct fields of research: psychology/education, public health and marketing. Depending on the research field the emphasis is put on either breastfeeding or social marketing as well as on the other concepts that were discovered to be of importance within this relationship. Namely, group and individual demography as well as behaviour were revealed to be important elements of the link between social marketing and breastfeeding. Based on the results this study concludes that a more multidimensional view on the relationship between the concepts under study is needed since the focus of previous studies is very one-sided and limited to just one element when all elements should be integrated equally.

Assessing and appraising nursing students' professional communication

NASA Astrophysics Data System (ADS)

Diers, Jane E.

The purpose of this research was to define professional communication in nursing and to develop a prototype to assess and appraise communication at a selected college. The research focused on verbal and nonverbal communication between the nurse and the client using a simulated environment. The first objective was to identify the major characteristics of professional communication in nursing. In this study, the characteristics of professional communication emerged from the constant comparison method of the results of research studies in the fields of healthcare and communication. These characteristics became the elements, representative properties, and descriptive dimensions to assess and appraise verbal and nonverbal communication at the college of study. The second objective was to develop a template to assess verbal and nonverbal communication at a selected college. Using a two-fold process, the researcher used the results from the first objective to begin template construction. First, specialists in the fields of communication and nursing established the content validity of the elements, representative properties, and descriptive dimensions. Second, the course educators determined the relevancy and importance of the elements, properties, and descriptive dimensions to the objectives of two courses at the college of study. The third objective was to develop a rubric to appraise nursing students' verbal and nonverbal communication in a videotaped communication review. An appraisal rubric was constructed from an extension of the template. This rubric was then tested by faculty at the selected college to appraise the communication of five students each in the junior and senior years of the nursing program.

Factors Influencing Energy Use and Carbon Emissions in China

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fisher-Vanden, Karen; Jefferson, Gary

This research project was designed to fill a critical void in our understanding of the state of energy research and innovation in China. It seeks to provide a comprehensive review and accounting of the various elements of the Chinese government and non-governmental sectors (commercial, university, research institutes) that are engaged in energy-related R&D and various aspects of energy innovation, including specific programs and projects designed to promote renewable energy innovation and energy conservation. The project provides an interrelated descriptive, statistical, and econometric account of China's overall energy innovation activities and capabilities, spanning the full economy with a particular focus onmore » the dynamic industrial sector.« less

Kashlev Named First Deputy Chief, GRCBL | Poster

Cancer.gov

By Nancy Parrish, Staff Writer Editor’s note: The text for this article was adapted from an e-mail announcement to the Center for Cancer Research community from Robert Wiltrout, Ph.D., on September 8, 2014. Robert Wiltrout, Ph.D., director, NCI Center for Cancer Research (CCR), recently announced the appointment of Mikhail Kashlev, Ph.D., to deputy chief of the Gene Regulation and Chromosome Biology Laboratory (GRCBL). The first deputy chief to be named in the GRCBL, Kashlev joins Jeff Strathern, Ph.D., GRCBL chief, in leading the laboratory in an active research environment that focuses on chromosome dynamics (recombination, chromosome segregation, and transposable elements) and regulation (transcription, silencing, and cell cycle control).

[Gender power, poverty and contraception: multiparous women's experiences].

PubMed

Prates, Cibeli de Souza; Abib, Gilda Maria de Carvalho; de Oliveira, Dora Lúcia Leidens Correa

2008-12-01

Multiparity among poor women is associated to vulnerability as a generating or strengthening factor. This is a qualitative and exploratory research that aims at analyzing experiences of contraception among poor multiparae women, considering the influence of gender on their autonomy in choosing the number of children, the moment of getting pregnant, and the contraception strategies. It also aims at analyzing the mechanisms of resistance used by these women in the search for such autonomy. The data were gathered through focus groups. The content analysis suggests that the high number of children these women give birth to is explained by a reduced autonomy in their use of contraception, arising from poverty and gender inequalities. These women face these difficulties using resistance strategies that result in male power disruptions. This research has brought new elements for understanding the multiparity phenomenon in the context of poverty, and it also contributes towards a critical analysis of actions focused on promoting family planning.

Applying projective techniques to formative research in health communication development.

PubMed

Wiehagen, Theresa; Caito, Nicole M; Thompson, Vetta Sanders; Casey, Christopher M; Weaver, Nancy L; Jupka, Keri; Kreuter, Matthew W

2007-04-01

This article describes a new approach to formative research in which projective techniques commonly used in psychological assessment were adapted for use in focus groups to help design colorectal-cancer screening materials for African American men and women. Participants (N = 20) were divided into six "design teams." Each team was given a selection of design supplies and asked to create and discuss a visual layout for screening materials. Participants chose design elements that reflected visual preferences that they felt would connect meaningfully with other African Americans. The dynamics within the design teams were different than in traditional focus groups, with participants having more control over the group's direction. Using projective techniques helped draw out unique information from participants by allowing them to "project" their opinions onto objects. This approach may be a valuable tool for health-promotion and health-communication practitioners seeking insight on the implicit values of a priority population.

Management of Customer Service in Terms of Logistics Information Systems

NASA Astrophysics Data System (ADS)

Kampf, Rudolf; Ližbetinová, Lenka; Tišlerová, Kamila

2017-03-01

This paper is focused on perceiving the logistic services as the competition advantage in frame of the ecommerce. Customers consider their purchases in its complexity and all the logistic services should be designed to meet with customers' preferences as much as possible. Our aim was to identify and evaluate of customers perceiving in frame of sales proposals offered by e-shops. Collected data of research were processed with the usage of cluster analysis. The aim of this paper is to present the results and conclusions from this research with focus on the elements of logistics services within e-commerce. These outputs can be used for knowledge base of information systems through which enterprises evaluate their decisions and selection of variants. For the enterprise, it is important to appropriate decisions about resource allocation and design of the structure of logistics services were set based on real customer preferences.

Broadband diffractive lens or imaging element

DOEpatents

Ceglio, Natale M.; Hawryluk, Andrew M.; London, Richard A.; Seppala, Lynn G.

1993-01-01

A broadband diffractive lens or imaging element produces a sharp focus and/or a high resolution image with broad bandwidth illuminating radiation. The diffractive lens is sectored or segmented into regions, each of which focuses or images a distinct narrowband of radiation but all of which have a common focal length. Alternatively, a serial stack of minus filters, each with a diffraction pattern which focuses or images a distinct narrowband of radiation but all of which have a common focal length, is used. The two approaches can be combined. Multifocal broadband diffractive elements can also be formed. Thin film embodiments are described.

Broadband diffractive lens or imaging element

DOEpatents

Ceglio, N.M.; Hawryluk, A.M.; London, R.A.; Seppala, L.G.

1993-10-26

A broadband diffractive lens or imaging element produces a sharp focus and/or a high resolution image with broad bandwidth illuminating radiation. The diffractive lens is sectored or segmented into regions, each of which focuses or images a distinct narrowband of radiation but all of which have a common focal length. Alternatively, a serial stack of minus filters, each with a diffraction pattern which focuses or images a distinct narrowband of radiation but all of which have a common focal length, is used. The two approaches can be combined. Multifocal broadband diffractive elements can also be formed. Thin film embodiments are described. 21 figures.

Resilience theory incorporated into urban wastewater systems management. State of the art.

PubMed

Juan-García, P; Butler, D; Comas, J; Darch, G; Sweetapple, C; Thornton, A; Corominas, Ll

2017-05-15

Government bodies, utilities, practitioners, and researchers have growing interest in the incorporation of resilience into wastewater management. Since resilience is a multidisciplinary term, it is important to review what has been achieved in the wastewater sector, and describe the future research directions for the forthcoming years. This work presents a critical review of studies that deal with resilience in the wastewater treatment sector, with a special focus on understanding how they addressed the key elements for assessing resilience, such as stressors, system properties, metrics and interventions to increase resilience. The results showed that only 17 peer-reviewed papers and 6 relevant reports, a small subset of the work in wastewater research, directly addressed resilience. The lack of consensus in the definition of resilience, and the elements of a resilience assessment, is hindering the implementation of resilience in wastewater management. To date, no framework for resilience assessment is complete, comprehensive or directly applicable to practitioners; current examples are lacking key elements (e.g. a comprehensive study of stressors, properties and metrics, examples of cases study, ability to benchmark interventions or connectivity with broader frameworks). Furthermore, resilience is seen as an additional cost or extra effort, instead of a means to overcome project uncertainty that could unlock new opportunities for investment. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

A novel phase assignment protocol and driving system for a high-density focused ultrasound array.

PubMed

Caulfield, R Erich; Yin, Xiangtao; Juste, Jose; Hynynen, Kullervo

2007-04-01

Currently, most phased-array systems intended for therapy are one-dimensional (1-D) and use between 5 and 200 elements, with a few two-dimensional (2-D) systems using several hundred elements. The move toward lambda/2 interelement spacing, which provides complete 3-D beam steering, would require a large number of closely spaced elements (0.15 mm to 3 mm). A solution to the resulting problem of cost and cable assembly size, which this study examines, is to quantize the phases available at the array input. By connecting elements with similar phases to a single wire, a significant reduction in the number of incoming lines can be achieved while maintaining focusing and beam steering capability. This study has explored the feasibility of such an approach using computer simulations and experiments with a test circuit driving a 100-element linear array. Simulation results demonstrated that adequate focusing can be obtained with only four phase signals without large increases in the grating lobes or the dimensions of the focus. Experiments showed that the method can be implemented in practice, and adequate focusing can be achieved with four phase signals with a reduction of 20% in the peak pressure amplitude squared when compared with the infinite-phase resolution case. Results indicate that the use of this technique would make it possible to drive more than 10,000 elements with 33 input lines. The implementation of this method could have a large impact on ultrasound therapy and diagnostic devices.

Experiences on p-Version Time-Discontinuous Galerkin's Method for Nonlinear Heat Transfer Analysis and Sensitivity Analysis

NASA Technical Reports Server (NTRS)

Hou, Gene

2004-01-01

The focus of this research is on the development of analysis and sensitivity analysis equations for nonlinear, transient heat transfer problems modeled by p-version, time discontinuous finite element approximation. The resulting matrix equation of the state equation is simply in the form ofA(x)x = c, representing a single step, time marching scheme. The Newton-Raphson's method is used to solve the nonlinear equation. Examples are first provided to demonstrate the accuracy characteristics of the resultant finite element approximation. A direct differentiation approach is then used to compute the thermal sensitivities of a nonlinear heat transfer problem. The report shows that only minimal coding effort is required to enhance the analysis code with the sensitivity analysis capability.

Spectroscopic Studies of Pre-Biotic Carbon Chemistry

NASA Technical Reports Server (NTRS)

Blake, Geoffrey A.

2002-01-01

As described in the original proposal and in our progress reports, research in the Blake group supported by the Exobiology program seeks to understand the pre-biotic chemistry of carbon along with that of other first- and second-row elements from the earliest stages of star formation through the development of planetary systems. The major tool used is spectroscopy, and the program has observational, laboratory, and theoretical components. The observational and theoretical programs are concerned primarily with a quantitative assessment of the chemical budgets of the biogenic elements in star-forming molecular cloud cores, while the laboratory work is focused on the complex species that characterize the prebiotic chemistry of carbon. We outline below our results over the past two years acquired, in part, with Exobiology support.

Advances and trends in the development of computational models for tires

NASA Technical Reports Server (NTRS)

Noor, A. K.; Tanner, J. A.

1985-01-01

Status and some recent developments of computational models for tires are summarized. Discussion focuses on a number of aspects of tire modeling and analysis including: tire materials and their characterization; evolution of tire models; characteristics of effective finite element models for analyzing tires; analysis needs for tires; and impact of the advances made in finite element technology, computational algorithms, and new computing systems on tire modeling and analysis. An initial set of benchmark problems has been proposed in concert with the U.S. tire industry. Extensive sets of experimental data will be collected for these problems and used for evaluating and validating different tire models. Also, the new Aircraft Landing Dynamics Facility (ALDF) at NASA Langley Research Center is described.

Sensitivity Analysis of Stability Problems of Steel Structures using Shell Finite Elements and Nonlinear Computation Methods

NASA Astrophysics Data System (ADS)

Kala, Zdeněk; Kala, Jiří

2011-09-01

The main focus of the paper is the analysis of the influence of residual stress on the ultimate limit state of a hot-rolled member in compression. The member was modelled using thin-walled elements of type SHELL 181 and meshed in the programme ANSYS. Geometrical and material non-linear analysis was used. The influence of residual stress was studied using variance-based sensitivity analysis. In order to obtain more general results, the non-dimensional slenderness was selected as a study parameter. Comparison of the influence of the residual stress with the influence of other dominant imperfections is illustrated in the conclusion of the paper. All input random variables were considered according to results of experimental research.

Health effects and toxicity mechanisms of rare earth elements-Knowledge gaps and research prospects.

PubMed

Pagano, Giovanni; Guida, Marco; Tommasi, Franca; Oral, Rahime

2015-05-01

In the recent decades, rare earth elements (REE) have undergone a steady spread in several industrial and medical applications, and in agriculture. Relatively scarce information has been acquired to date on REE-associated biological effects, from studies of bioaccumulation and of bioassays on animal, plant and models; a few case reports have focused on human health effects following occupational REE exposures, in the present lack of epidemiological studies of occupationally exposed groups. The literature is mostly confined to reports on few REE, namely cerium and lanthanum, whereas substantial information gaps persist on the health effects of other REE. An established action mechanism in REE-associated health effects relates to modulating oxidative stress, analogous to the recognized redox mechanisms observed for other transition elements. Adverse outcomes of REE exposures include a number of endpoints, such as growth inhibition, cytogenetic effects, and organ-specific toxicity. An apparent controversy regarding REE-associated health effects relates to opposed data pointing to either favorable or adverse effects of REE exposures. Several studies have demonstrated that REE, like a number of other xenobiotics, follow hormetic concentration-related trends, implying stimulatory or protective effects at low levels, then adverse effects at higher concentrations. Another major role for REE-associated effects should be focused on pH-dependent REE speciation and hence toxicity. Few reports have demonstrated that environmental acidification enhances REE toxicity; these data may assume particular relevance in REE-polluted acidic soils and in REE mining areas characterized by concomitant REE and acid pollution. The likely environmental threats arising from REE exposures deserve a new line of research efforts. Copyright © 2015 Elsevier Inc. All rights reserved.

Recent progress in NASA Langley textile reinforced composites program

NASA Technical Reports Server (NTRS)

Dexter, H. Benson; Harris, Charles E.; Johnston, Norman J.

1992-01-01

The NASA LaRC is conducting and sponsoring research to explore the benefits of textile reinforced composites for civil transport aircraft primary structures. The objective of this program is to develop and demonstrate the potential of affordable textile reinforced composite materials to meet design properties and damage tolerance requirements of advanced aircraft structural concepts. In addition to in-house research, the program was recently expanded to include major participation by the aircraft industry and aerospace textile companies. The major program elements include development of textile preforms, processing science, mechanics of materials, experimental characterization of materials, and development and evaluation of textile reinforced composite structural elements and subcomponents. The NASA Langley in-house focus is as follows: development of a science-based understanding of resin transfer molding (RTM), development of powder-coated towpreg processes, analysis methodology, and development of a performance database on textile reinforced composites. The focus of the textile industry participation is on development of multidirectional, damage-tolerant preforms, and the aircraft industry participation is in the areas of design, fabrication and testing of textile reinforced composite structural elements and subcomponents. Textile processes such as 3D weaving, 2D and 3D braiding, and knitting/stitching are being compared with conventional laminated tape processes for improved damage tolerance. Through-the-thickness reinforcements offer significant damage tolerance improvements. However, these gains must be weighed against potential loss in in-plane properties such as strength and stiffness. Analytical trade studies are underway to establish design guidelines for the application of textile material forms to meet specific loading requirements. Fabrication and testing of large structural components are required to establish the full potential of textile reinforced composite materials.

Marketing activity in the community pharmacy sector - A scoping review.

PubMed

Mirzaei, Ardalan; Carter, Stephen R; Schneider, Carl R

2018-02-01

Community pharmacy ownership requires engaging with marketing strategies to influence consumer behaviour. There is a plethora of information from trade journals, expert opinion, and published discussion surrounding this issue. Despite this, evidence relating to the efficacy of marketing activity within the pharmacy sector is scant. To review how marketing activity has been conceptualised in the community pharmacy sector and to determine the evidence for the effect of marketing activity. Seven databases were systematically searched using a scoping review framework with the reporting protocol of PRISMA-P. The search yielded 33 studies that were analysed for year of publication, journal, country of focus, and framework of marketing. The majority of marketing research papers focused on the United States and were published in healthcare journals. These were various marketing strategy elements, including; segmentation, targeting, differentiation, and positioning. Also evident was research regarding marketing mix, which predominately involved the "4Ps" model. Actual marketing activity comprised little of the research. Research into marketing activity in community pharmacy is limited, and little evidence is available to show the effects of such activities. Future research needs to demonstrate the causality for the effect of marketing activities on consumer behaviour and economic outcomes. Copyright © 2017 Elsevier Inc. All rights reserved.

Third European Stroke Science Workshop.

PubMed

Dichgans, Martin; Planas, Anna M; Biessels, Geert Jan; van der Worp, Bart; Sudlow, Cathie; Norrving, Bo; Lees, Kennedy; Mattle, Heinrich P

2016-07-01

Lake Eibsee, Garmisch-Partenkirchen, November 19 to 21, 2015: The European Stroke Organization convened >120 stroke experts from 27 countries to discuss latest results and hot topics in clinical, translational, and basic stroke research. Since its inception in 2011, the European Stroke Science Workshop has become a cornerstone of European Stroke Organization's academic activities and major highlight for researchers in the field. Participants include stroke researchers at all career stages who convene for plenary lectures and discussions, thus facilitating crosstalk among researchers from different fields. As in previous years, the workshop was organized into 7 scientific sessions each focusing on a major research topic. All sessions started with a keynote lecture that provided an overview on current developments and set the scene for the following presentations. The latter were short focused talks on a timely topic and included the most recent findings, including unpublished data. A new element at this year's meeting was a hot topic session in which speakers had to present a provocative concept or update sharply within 5 minutes. In the following, we summarize the key contents of the meeting. The program is provided in the online-only Data Supplement. © 2016 American Heart Association, Inc.

Evidence Base Update for Autism Spectrum Disorder.

PubMed

Smith, Tristram; Iadarola, Suzannah

2015-01-01

This evidence base update examines the level of empirical support for interventions for children with autism spectrum disorder (ASD) younger than 5 years old. It focuses on research published since a previous review in this journal (Rogers & Vismara, 2008 ). We identified psychological or behavioral interventions that had been manualized and evaluated in either (a) experimental or quasi-experimental group studies or (b) systematic reviews of single-subject studies. We extracted data from all studies that met these criteria and were published after the previous review. Interventions were categorized across two dimensions. First, primary theoretical principles included applied behavior analysis (ABA), developmental social-pragmatic (DSP), or both. Second, practice elements included scope (comprehensive or focused), modality (individual intervention with the child, parent training, or classrooms), and intervention targets (e.g., spoken language or alternative and augmentative communication). We classified two interventions as well-established (individual, comprehensive ABA and teacher-implemented, focused ABA + DSP), 3 as probably efficacious (individual, focused ABA for augmentative and alternative communication; individual, focused ABA + DSP; and focused DSP parent training), and 5 as possibly efficacious (individual, comprehensive ABA + DSP; comprehensive ABA classrooms; focused ABA for spoken communication; focused ABA parent training; and teacher-implemented, focused DSP). The evidence base for ASD interventions has grown substantially since 2008. An increasing number of interventions have some empirical support; others are emerging as potentially efficacious. Priorities for future research include improving outcome measures, developing interventions for understudied ASD symptoms (e.g., repetitive behaviors), pinpointing mechanisms of action in interventions, and adapting interventions for implementation with fidelity by community providers.

Long-Term Engagement in Authentic Research with NASA (LEARN): Innovative Practices Suggested By a New Model for Teacher Research Experiences

NASA Astrophysics Data System (ADS)

Pippin, M. R.; Joseph, J. D.; Yang, M. M.; Omar, A. H.; Crecelius, S.; Harte, T.; Lewis, P. M., Jr.; Taylor, J.; Bujosa, R.; Moulton, C.; Haggard, C. S.; Hyater-Adams, S.; Kollmeyer, R.; Weisman, A.

2014-12-01

NASA's LEARN Project is an innovative program that provides long-term immersion in the practice of atmospheric science for middle and high school in-service teachers. Working alongside NASA scientists and using authentic NASA Science Mission Directorate research data, teachers develop individual research topics of interest during two weeks in the summer while on-site at NASA Langley. With continued, intensive mentoring by NASA scientists, the teachers further develop their research throughout the academic year through virtual group meetings and data team meetings mirroring scientific collaborations. At the end of the first year, LEARN teachers present scientific posters. The LEARN experience has had such an impact that multiple teachers from the first two cohorts have elected to continue their research. The LEARN project evaluation has provided insights into particularly effective elements of this new approach. Findings indicate that teachers' perceptions of the scientific enterprise have changed, and that LEARN provided substantial resources to help them take real-world research to their students. This presentation will focus on key factors from LEARN's implementation that inform best practices for the incorporation of authentic scientific research into teacher professional development experiences. We suggest that these factors should be considered in the development of other such experiences, including: (1) The involvement of a single scientist as both the project leader/manager and the project scientist, to ensure that the project can meet teachers' needs. (2) An emphasis on framing and approaching scientific research questions, so that teachers can learn to evaluate the feasibility of studies based on scope, scale, and availability of data. (3) Long term, ongoing relationships where teachers and scientists work as collaborators, beyond the workshop "mold." (4) A focus on meeting the needs of individual teachers, whether their needs relate to elements of research and analysis, or to their tight professional schedules. (5) Above all, flexibility and patience. LEARN builds relationships with teachers slowly, over a long period of time. In the middle, life often intervenes. LEARN has emphasized that teachers' success is more important than deadlines or following a rigid protocol.

Focusators for laser-branding

NASA Astrophysics Data System (ADS)

Doskolovich, L. L.; Kazanskiy, N. L.; Kharitonov, S. I.; Uspleniev, G. V.

A new method is investigated for synthesis of computer-generated optical elements: focusators that are able to focus the radial-symmetrical laser beam into complex focal contours, in particular into alphanumeric symbols. The method is based on decomposition of the focal contour into segments of straight lines and semi-circles, following corresponding spacing out of the focusator on elementary segments (concentric rings or sectors) and solution of the inverse task of focusing from focusator segments into corresponding elements of the focal contour. The results of numerical computing of the field from synthesized focusators into the letters are presented. The theoretical efficiency of the focusators discussed is no less than 85%. The amplitude masks and the results of operational studies of synthesized focusators are presented.

Nanoporous Metals with Structural Hierarchy: A Review

DOE PAGES

Juarez, Theresa; Biener, Juergen; Weissmüller, Jörg; ...

2017-08-09

Nanoporous (np) metals have generated much interest since they combine several desirable material characteristics, such as high surface area, mechanical size effects, and high conductivity. Most of the research has been focused on np Au due to its relatively straightforward synthesis, chemical stability, and many promising applications in the fields of catalysis and actuation. Other materials, such as np-Cu, Ag, and Pd have also been studied. Here, this review discusses recent advances in the field of np metals, focusing on new research areas that implement and leverage structural hierarchy while using np metals as their base structural constituents. First, wemore » focus on single-element porous metals that are made of np metals at the fundamental level, but synthesized with additional levels of porosity. Second, we discuss the fabrication of composite structures, which use auxiliary materials to enhance the properties of np metals. Important applications of these hierarchical materials, especially in the fields of catalysis and electrochemistry, are also reviewed. Lastly, we conclude with a discussion about future opportunities for the advancement and application of np metals.« less

Nanoporous Metals with Structural Hierarchy: A Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Juarez, Theresa; Biener, Juergen; Weissmüller, Jörg

Nanoporous (np) metals have generated much interest since they combine several desirable material characteristics, such as high surface area, mechanical size effects, and high conductivity. Most of the research has been focused on np Au due to its relatively straightforward synthesis, chemical stability, and many promising applications in the fields of catalysis and actuation. Other materials, such as np-Cu, Ag, and Pd have also been studied. Here, this review discusses recent advances in the field of np metals, focusing on new research areas that implement and leverage structural hierarchy while using np metals as their base structural constituents. First, wemore » focus on single-element porous metals that are made of np metals at the fundamental level, but synthesized with additional levels of porosity. Second, we discuss the fabrication of composite structures, which use auxiliary materials to enhance the properties of np metals. Important applications of these hierarchical materials, especially in the fields of catalysis and electrochemistry, are also reviewed. Lastly, we conclude with a discussion about future opportunities for the advancement and application of np metals.« less

Trace elements in stormflow, ash, and burned soil following the 2009 station fire in southern California

USGS Publications Warehouse

Burton, Carmen; Hoefen, Todd M.; Plumlee, Geoffrey S.; Baumberger, Katherine L.; Backlin, Adam R.; Gallegos, Elizabeth; Fisher, Robert N.

2016-01-01

Most research on the effects of wildfires on stream water quality has focused on suspended sediment and nutrients in streams and water bodies, and relatively little research has examined the effects of wildfires on trace elements. The purpose of this study was two-fold: 1) to determine the effect of the 2009 Station Fire in the Angeles National Forest northeast of Los Angeles, CA on trace element concentrations in streams, and 2) compare trace elements in post-fire stormflow water quality to criteria for aquatic life to determine if trace elements reached concentrations that can harm aquatic life. Pre-storm and stormflow water-quality samples were collected in streams located inside and outside of the burn area of the Station Fire. Ash and burned soil samples were collected from several locations within the perimeter of the Station Fire. Filtered concentrations of Fe, Mn, and Hg and total concentrations of most trace elements in storm samples were elevated as a result of the Station Fire. In contrast, filtered concentrations of Cu, Pb, Ni, and Se and total concentrations of Cu were elevated primarily due to storms and not the Station Fire. Total concentrations of Se and Zn were elevated as a result of both storms and the Station Fire. Suspended sediment in stormflows following the Station Fire was an important transport mechanism for trace elements. Cu, Pb, and Zn primarily originate from ash in the suspended sediment. Fe primarily originates from burned soil in the suspended sediment. As, Mn, and Ni originate from both ash and burned soil. Filtered concentrations of trace elements in stormwater samples affected by the Station Fire did not reach levels that were greater than criteria established for aquatic life. Total concentrations for Fe, Pb, Ni, and Zn were detected at concentrations above criteria established for aquatic life.

Trace Elements in Stormflow, Ash, and Burned Soil following the 2009 Station Fire in Southern California

PubMed Central

Burton, Carmen A.; Hoefen, Todd M.; Plumlee, Geoffrey S.; Baumberger, Katherine L.; Backlin, Adam R.; Gallegos, Elizabeth; Fisher, Robert N.

2016-01-01

Most research on the effects of wildfires on stream water quality has focused on suspended sediment and nutrients in streams and water bodies, and relatively little research has examined the effects of wildfires on trace elements. The purpose of this study was two-fold: 1) to determine the effect of the 2009 Station Fire in the Angeles National Forest northeast of Los Angeles, CA on trace element concentrations in streams, and 2) compare trace elements in post-fire stormflow water quality to criteria for aquatic life to determine if trace elements reached concentrations that can harm aquatic life. Pre-storm and stormflow water-quality samples were collected in streams located inside and outside of the burn area of the Station Fire. Ash and burned soil samples were collected from several locations within the perimeter of the Station Fire. Filtered concentrations of Fe, Mn, and Hg and total concentrations of most trace elements in storm samples were elevated as a result of the Station Fire. In contrast, filtered concentrations of Cu, Pb, Ni, and Se and total concentrations of Cu were elevated primarily due to storms and not the Station Fire. Total concentrations of Se and Zn were elevated as a result of both storms and the Station Fire. Suspended sediment in stormflows following the Station Fire was an important transport mechanism for trace elements. Cu, Pb, and Zn primarily originate from ash in the suspended sediment. Fe primarily originates from burned soil in the suspended sediment. As, Mn, and Ni originate from both ash and burned soil. Filtered concentrations of trace elements in stormwater samples affected by the Station Fire did not reach levels that were greater than criteria established for aquatic life. Total concentrations for Fe, Pb, Ni, and Zn were detected at concentrations above criteria established for aquatic life. PMID:27144270

Optimization of the Robotic Joint Equipped with Epicyloidal Gear and Direct Drive for Space Applications

NASA Astrophysics Data System (ADS)

Seweryn, Karol; Grassmann, Kamil; Ciesielska, Monika; Rybus, Tomasz; Turek, Michal

2013-09-01

One of the most critical element in the orbital manipulators are kinematic joints. Joints must be adapted to work in tough conditions of space environment and must ensure the greatest efficiency and work without backlash. At the Space Mechatronics and Robotics Laboratory (LMRS) of the Space Research Centre, PAS our team designed and built a lightweight kinematic pair based on a new concept. The new concept is based on the epicycloid two-stage gearbox with torque motor. In this paper we have focused on optimization of the joint design for space application. The optimization was focused on the minimization of the mass and backlash effects and on maximizing the joint efficiency.

Shape Effect of Electrochemical Chloride Extraction in Structural Reinforced Concrete Elements Using a New Cement-Based Anodic System

PubMed Central

Carmona, Jesús; Climent, Miguel-Ángel; Antón, Carlos; de Vera, Guillem; Garcés, Pedro

2015-01-01

This article shows the research carried out by the authors focused on how the shape of structural reinforced concrete elements treated with electrochemical chloride extraction can affect the efficiency of this process. Assuming the current use of different anode systems, the present study considers the comparison of results between conventional anodes based on Ti-RuO2 wire mesh and a cement-based anodic system such as a paste of graphite-cement. Reinforced concrete elements of a meter length were molded to serve as laboratory specimens, to closely represent authentic structural supports, with circular and rectangular sections. Results confirm almost equal performances for both types of anode systems when electrochemical chloride extraction is applied to isotropic structural elements. In the case of anisotropic ones, such as rectangular sections with no uniformly distributed rebar, differences in electrical flow density were detected during the treatment. Those differences were more extreme for Ti-RuO2 mesh anode system. This particular shape effect is evidenced by obtaining the efficiencies of electrochemical chloride extraction in different points of specimens.

On the torsional loading of elastoplastic spheres in contact

NASA Astrophysics Data System (ADS)

Nadimi, Sadegh; Fonseca, Joana

2017-06-01

The mechanical interaction between two bodies involves normal loading in combination with tangential, torsional and rotational loading. This paper focuses on the torsional loading of two spherical bodies which leads to twisting moment. The theoretical approach for calculating twisting moment between two spherical bodies has been proposed by Lubkin [1]. Due to the complexity of the solution, this has been simplified by Deresiewicz for discrete element modelling [2]. Here, the application of a simplified model for elastoplastic spheres is verified using computational modelling. The single grain interaction is simulated in a combined finite discrete element domain. In this domain a grain can deform using a finite element formulation and can interact with other objects based on discrete element principles. For an elastoplastic model, the contact area is larger in comparison with the elastic model, under a given normal force. Therefore, the plastic twisting moment is stiffer. The results presented here are important for describing any granular system involving torsional loading of elastoplastic grains. In particular, recent research on the behaviour of soil has clearly shown the importance of plasticity on grain interaction and rearrangement.

Effect of Bending Stiffness of the Electroactive Polymer Element on the Performance of a Hybrid Actuator System (HYBAS)

NASA Technical Reports Server (NTRS)

Xu, Tian-Bing; Su, Ji; Jiang, Xiaoning; Rehrig, Paul W.; Zhang, Shujun; Shrout, Thomas R.; Zhang, Qiming

2006-01-01

An electroactive polymer (EAP)-ceramic hybrid actuation system (HYBAS) was developed recently at NASA Langley Research Center. This paper focuses on the effect of the bending stiffness of the EAP component on the performance of a HYBAS, in which the actuation of the EAP element can match the theoretical prediction at various length/thickness ratios for a constant elastic modulus of the EAP component. The effects on the bending stiffness of the elastic modulus and length/thickness ratio of the EAP component were studied. A critical bending stiffness to keep the actuation of the EAP element suitable for a rigid beam theory-based modeling was found for electron irradiated P(VDF-TrFE) copolymer. For example, the agreement of experimental data and theoretical modeling for a HYBAS with the length/thickness ratio of EAP element at 375 times is demonstrated. However, the beam based theoretical modeling becomes invalid (i.e., the profile of the HYBAS movement does not follow the prediction of theoretical modeling) when the bending stiffness is lower than a critical value.

Music, health, and well-being: a review.

PubMed

MacDonald, Raymond A R

2013-08-07

The relationship between arts participation and health is currently very topical. Motivated by a desire to investigate innovative, non-invasive, and economically viable interventions that embrace contemporary definitions of health, practitioners and researchers across the world have been developing and researching arts inventions. One of the key drivers in this vigorous research milieu is the growth of qualitative research within health care contexts and researchers interested in exploring the potential benefits of musical participation have fully embraced the advances that have taken place in health-related qualitative research. The following article presents a number of different types of qualitative research projects focused on exploring the process and outcomes of music interventions. It also presents a new conceptual model for music, health and well-being. This new model develops on a previous version of MacDonald, Kreutz, and Mitchell (2012b) by incorporating new elements and contextualization and providing detailed experimental examples to support the various components.

Music, health, and well-being: A review

PubMed Central

2013-01-01

The relationship between arts participation and health is currently very topical. Motivated by a desire to investigate innovative, non-invasive, and economically viable interventions that embrace contemporary definitions of health, practitioners and researchers across the world have been developing and researching arts inventions. One of the key drivers in this vigorous research milieu is the growth of qualitative research within health care contexts and researchers interested in exploring the potential benefits of musical participation have fully embraced the advances that have taken place in health-related qualitative research. The following article presents a number of different types of qualitative research projects focused on exploring the process and outcomes of music interventions. It also presents a new conceptual model for music, health and well-being. This new model develops on a previous version of MacDonald, Kreutz, and Mitchell (2012b) by incorporating new elements and contextualization and providing detailed experimental examples to support the various components. PMID:23930991

Challenges in Measuring Benefit of Clinical Research Training Programs--the ASH Clinical Research Training Institute Example.

PubMed

Sung, Lillian; Crowther, Mark; Byrd, John; Gitlin, Scott D; Basso, Joe; Burns, Linda

2015-12-01

The American Society of Hematology developed the Clinical Research Training Institute (CRTI) to address the lack of training in patient-oriented research among hematologists. As the program continues, we need to consider metrics for measuring the benefits of such a training program. This article addresses the benefits of clinical research training programs. The fundamental and key components are education and mentorship. However, there are several other benefits including promotion of collaboration, job and advancement opportunities, and promotion of work-life balance. The benefits of clinical research training programs need to be measured so that funders and society can judge if they are worth the investment in time and resources. Identification of elements that are important to program benefit is essential to measuring the benefit of the program as well as program planning. Future work should focus on the constructs which contribute to benefits of clinical research training programs such as CRTI.

Research on aspheric focusing lens processing and testing technology in the high-energy laser test system

NASA Astrophysics Data System (ADS)

Liu, Dan; Fu, Xiu-hua; Jia, Zong-he; Wang, Zhe; Dong, Huan

2014-08-01

In the high-energy laser test system, surface profile and finish of the optical element are put forward higher request. Taking a focusing aspherical zerodur lens with a diameter of 100mm as example, using CNC and classical machining method of combining surface profile and surface quality of the lens were investigated. Taking profilometer and high power microscope measurement results as a guide, by testing and simulation analysis, process parameters were improved constantly in the process of manufacturing. Mid and high frequency error were trimmed and improved so that the surface form gradually converged to the required accuracy. The experimental results show that the final accuracy of the surface is less than 0.5μm and the surface finish is □, which fulfils the accuracy requirement of aspherical focusing lens in optical system.

Derivative Free Optimization of Complex Systems with the Use of Statistical Machine Learning Models

DTIC Science & Technology

2015-09-12

AFRL-AFOSR-VA-TR-2015-0278 DERIVATIVE FREE OPTIMIZATION OF COMPLEX SYSTEMS WITH THE USE OF STATISTICAL MACHINE LEARNING MODELS Katya Scheinberg...COMPLEX SYSTEMS WITH THE USE OF STATISTICAL MACHINE LEARNING MODELS 5a.  CONTRACT NUMBER 5b.  GRANT NUMBER FA9550-11-1-0239 5c.  PROGRAM ELEMENT...developed, which has been the focus of our research. 15. SUBJECT TERMS optimization, Derivative-Free Optimization, Statistical Machine Learning 16. SECURITY

A Study on the Failure of Conventional Deterrence: The Case Study of the Bombardment of Yeonpyeong in 2010

DTIC Science & Technology

2016-12-01

December 2016 3. REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE A STUDY ON THE FAILURE OF CONVENTIONAL DETERRENCE: THE CASE ...Approved for public release. Distribution is unlimited A STUDY ON THE FAILURE OF CONVENTIONAL DETERRENCE: THE CASE STUDY OF THE BOMBARDMENT OF...necessary to analyze these diverse elements comprehensively. E. RESEARCH DESIGN This thesis focuses on a single case study about the bombardment of

Addressing Human Factors Gaps in Cyber Defense

DTIC Science & Technology

2016-09-23

Factors Gaps in Cyber Defense 5a. CONTRACT NUMBER FA8650-14-D-6501-0009 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Alex... Cyber security is a high-ranking national priority that is only likely to grow as we become more dependent on cyber systems. From a research perspective...currently available work often focuses solely on technological aspects of cyber , acknowledging the human in passing, if at all. In recent years, the

Laser Additive Manufacturing of Magnetic Materials

NASA Astrophysics Data System (ADS)

Mikler, C. V.; Chaudhary, V.; Borkar, T.; Soni, V.; Jaeger, D.; Chen, X.; Contieri, R.; Ramanujan, R. V.; Banerjee, R.

2017-03-01

While laser additive manufacturing is becoming increasingly important in the context of next-generation manufacturing technologies, most current research efforts focus on optimizing process parameters for the processing of mature alloys for structural applications (primarily stainless steels, titanium base, and nickel base alloys) from pre-alloyed powder feedstocks to achieve properties superior to conventionally processed counterparts. However, laser additive manufacturing or processing can also be applied to functional materials. This article focuses on the use of directed energy deposition-based additive manufacturing technologies, such as the laser engineered net shaping (LENS™) process, to deposit magnetic alloys. Three case studies are presented: Fe-30 at.%Ni, permalloys of the type Ni-Fe-V and Ni-Fe-Mo, and Fe-Si-B-Cu-Nb (derived from Finemet) alloys. All these alloys have been processed from a blend of elemental powders used as the feedstock, and their resultant microstructures, phase formation, and magnetic properties are discussed in this paper. Although these alloys were produced from a blend of elemental powders, they exhibited relatively uniform microstructures and comparable magnetic properties to those of their conventionally processed counterparts.

Measurement of Irradiated Pyroprocessing Samples via Laser Induced Breakdown Spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phongikaroon, Supathorn

The primary objective of this research is to develop an applied technology and provide an assessment to remotely measure and analyze the real time or near real time concentrations of used nuclear fuel (UNF) dissolute in electrorefiners. Here, Laser-Induced Breakdown Spectroscopy (LIBS), in UNF pyroprocessing facilities will be investigated. LIBS is an elemental analysis method, which is based on the emission from plasma generated by focusing a laser beam into the medium. This technology has been reported to be applicable in the media of solids, liquids (includes molten metals), and gases for detecting elements of special nuclear materials. The advantagesmore » of applying the technology for pyroprocessing facilities are: (i) Rapid real-time elemental analysis|one measurement/laser pulse, or average spectra from multiple laser pulses for greater accuracy in < 2 minutes; (ii) Direct detection of elements and impurities in the system with low detection limits|element specific, ranging from 2-1000 ppm for most elements; and (iii) Near non-destructive elemental analysis method (about 1 g material). One important challenge to overcome is achieving high-resolution spectral analysis to quantitatively analyze all important fission products and actinides. Another important challenge is related to accessibility of molten salt, which is heated in a heavily insulated, remotely operated furnace in a high radiation environment with an argon atmosphere.« less

The influences of inorganic elements in soil on the development of famous - region Atractylodes lancea (Thunb.) DC

PubMed Central

Zhang, Weiwanqi; Ouyang, Zhen; Zhao, Ming; Wei, Yuan; Peng, Huasheng; Wang, Qiang; Guo, Ling

2015-01-01

Background: Atractylodes lancea (Thunb.) DC., is an important medicinal plant in China. Recently, researches of A. Lancea were focused on chemical composition and genetics, only a few were concerned with soil factors. Objective: The aim was to discuss the relationship between geo-herbalism of A. Lancea (Thunb.) DC. and inorganic elements in soil. Materials and Methods: The contents of 15 kinds of inorganic elements in the rhizoma of A. Lancea (Thunb.) DC. and soils from various regions were determined with inductively coupled plasma-optical emission spectrometer and the data were analyzed with Statistical Package for the Social Sciences 20.0 software. Results: The contents of inorganic elements in rhizoma of A. Lancea and in soil with different geological background were different. The soils in the famous region contained high aluminum, iron, sodium and low sulfur content. The rhizoma of A. Lancea contained high aluminum, lithium, manganese and low iron, sulfur content. The famous-region crude drugs had a strong tendency to accumulate selenium, manganese. Ten characteristic elements of A. Lancea were K, Ca, S, Al, Li, Ti, Mn, Pb, Ni, SE. Conclusion: The contents of inorganic elements in rhizoma of A. Lancea showed a significant positive interrelationship with those in soil. It was identified that inorganic elements play an important role in forming authenticity A. Lancea (Thunb.) DC. PMID:25829773

Guidelines for the Gamification of Self-Management of Chronic Illnesses: Multimethod Study.

PubMed

AlMarshedi, Alaa; Wills, Gary; Ranchhod, Ashok

2017-05-12

Gamification is the use of game elements and techniques in nongaming contexts. The use of gamification in health care is receiving a great deal of attention in both academic research and the industry. However, it can be noticed that many gamification apps in health care do not follow any standardized guidelines. This research aims to (1) present a set of guidelines based on the validated framework the Wheel of Sukr and (2) assess the guidelines through expert interviews and focus group sessions with developers. Expert interviews (N=6) were conducted to assess the content of the guidelines and that they reflect the Wheel of Sukr. In addition, the guidelines were assessed by developers (N=15) in 5 focus group sessions, where each group had an average of 3 developers. The guidelines received support from the experts. By the end of the sixth interview, it was determined that a saturation point was reached. Experts agreed that the guidelines accurately reflect the framework the Wheel of Sukr and that developers can potentially use them to create gamified self-management apps for chronic illnesses. Moreover, the guidelines were welcomed by developers who participated in the focus group sessions. They found the guidelines to be clear, useful, and implementable. Also, they were able to suggest many ways of gamifying a nongamified self-management app when they were presented with one. The findings suggest that the guidelines introduced in this research are clear, useful, and ready to be implemented for the creation of self-management apps that use the notion of gamification as described in the Wheel of Sukr framework. The guidelines are now ready to be practically tested. Further practical studies of the effectiveness of each element in the guidelines are to be carried out. ©Alaa AlMarshedi, Gary Wills, Ashok Ranchhod. Originally published in JMIR Serious Games (http://games.jmir.org), 12.05.2017.

Transtheoretical Model-based Nursing Intervention on Lifestyle Change: A Review Focused on Intervention Delivery Methods.

PubMed

Lee, Joo Yun; Park, Hyeoun-Ae; Min, Yul Ha

2015-06-01

The transtheoretical model (TTM) was used to provide tailored nursing for lifestyle management such as diet, physical activity, and smoking cessation. The present study aims to assess the provision of intervention delivery methods, intervention elements, and stage-matched interventions, in order to identify ways in which information technology is used in the TTM-based research. The relevant literature was selected by two researchers using inclusion criteria after searching for "TTM (transtheoretical or stage of change)" and "nursing" from the databases PubMed and CINAHL. The selected studies were categorized in terms of study characteristics, intervention delivery method, intervention element, and use and level of stage-matched intervention. A total of 35 studies were selected including eight studies that used information communication technology (ICT). Nine different intervention delivery methods were used, of which "face-to-face" was the most common at 24 times. Of the 35 studies, 26 provided stage-matched interventions. Seven different intervention elements were used, of which "counseling" was the most common at 27 times. Of all the intervention elements, tailored feedback used ICT the most at seven instances out of nine, and there was a significant difference in the rate of ICT usage among intervention elements. ICT is not yet actively used in the TTM-based nursing interventions. Stage-matched interventions and TTM concepts were shown to be in partial use also in the TTM-based interventions. Therefore, it is necessary to develop a variety of ways to use ICT in tailored nursing interventions and to use TTM frameworks and concepts. Copyright © 2015. Published by Elsevier B.V.

[Research progress on identification and quality evaluation of glues medicines].

PubMed

Li, Hui-Hu; Ren, Gang; Chen, Li-Min; Zhong, Guo-Yue

2018-01-01

Glues medicines is a special kind of traditional Chinese medicine.As the market demand is large, the raw materials are in short supply and lacks proper quality evaluation technology, which causes inconsistent quality of products on the market. Its authentic identification and evaluation stay a problem to be solved. In this paper, the research progress of the methods and techniques of the evaluation of the identification and quality of glues medicines were reviewed. The researches of medicinal glue type identification and quality evaluation mainly concentrated in four aspects of medicinal materials of physical and chemical properties, trace elements, organic chemicals and biological genetic methods and techniques. The methods of physicochemical properties include thermal analysis, gel electrophoresis, isoelectric focusing electrophoresis, infrared spectroscopy, gel exclusion chromatography, and circular dichroism. The methods including atomic absorption spectrometry, X-ray fluorescence spectrometry, plasma emission spectrometry and visible spectrophotometry were used for the study of the trace elements of glues medicines. The organic chemical composition was studied by methods of composition of amino acids, content detection, odor detection, lipid soluble component, organic acid detection. Methods based on the characteristics of biogenetics include DNA, polypeptide and amino acid sequence difference analysis. Overall, because of relative components similarity of the glues medicines (such as amino acids, proteins and peptides), its authenticity and quality evaluation index is difficult to judge objectively, all sorts of identification evaluation methods have different characteristics, but also their limitations. It indicates that further study should focus on identification of evaluation index and various technology integrated application combining with the characteristics of the production process. Copyright© by the Chinese Pharmaceutical Association.

An amplitude and phase hybrid modulation Fresnel diffractive optical element

NASA Astrophysics Data System (ADS)

Li, Fei; Cheng, Jiangao; Wang, Mengyu; Jin, Xueying; Wang, Keyi

2018-04-01

An Amplitude and Phase Hybrid Modulation Fresnel Diffractive Optical Element (APHMFDOE) is proposed here. We have studied the theory of APHMFDOE and simulated the focusing properties of it along the optical axis, which show that the focus can be blazed to other positions with changing the quadratic phase factor. Moreover, we design a Composite Fresnel Diffraction Optical Element (CFDOE) based on the characteristics of APHMFDOE. It greatly increases the outermost zone width without changing the F-number, which brings a lot of benefits to the design and processing of diffraction device. More importantly, the diffraction efficiency of the CFDOE is almost unchanged compared with AFZP at the same focus.

The use of an automated flight test management system in the development of a rapid-prototyping flight research facility

NASA Technical Reports Server (NTRS)

Duke, Eugene L.; Hewett, Marle D.; Brumbaugh, Randal W.; Tartt, David M.; Antoniewicz, Robert F.; Agarwal, Arvind K.

1988-01-01

An automated flight test management system (ATMS) and its use to develop a rapid-prototyping flight research facility for artificial intelligence (AI) based flight systems concepts are described. The ATMS provides a flight test engineer with a set of tools that assist in flight planning and simulation. This system will be capable of controlling an aircraft during the flight test by performing closed-loop guidance functions, range management, and maneuver-quality monitoring. The rapid-prototyping flight research facility is being developed at the Dryden Flight Research Facility of the NASA Ames Research Center (Ames-Dryden) to provide early flight assessment of emerging AI technology. The facility is being developed as one element of the aircraft automation program which focuses on the qualification and validation of embedded real-time AI-based systems.

Bridging Food Webs, Ecosystem Metabolism, and Biogeochemistry Using Ecological Stoichiometry Theory.

PubMed

Welti, Nina; Striebel, Maren; Ulseth, Amber J; Cross, Wyatt F; DeVilbiss, Stephen; Glibert, Patricia M; Guo, Laodong; Hirst, Andrew G; Hood, Jim; Kominoski, John S; MacNeill, Keeley L; Mehring, Andrew S; Welter, Jill R; Hillebrand, Helmut

2017-01-01

Although aquatic ecologists and biogeochemists are well aware of the crucial importance of ecosystem functions, i.e., how biota drive biogeochemical processes and vice-versa, linking these fields in conceptual models is still uncommon. Attempts to explain the variability in elemental cycling consequently miss an important biological component and thereby impede a comprehensive understanding of the underlying processes governing energy and matter flow and transformation. The fate of multiple chemical elements in ecosystems is strongly linked by biotic demand and uptake; thus, considering elemental stoichiometry is important for both biogeochemical and ecological research. Nonetheless, assessments of ecological stoichiometry (ES) often focus on the elemental content of biota rather than taking a more holistic view by examining both elemental pools and fluxes (e.g., organismal stoichiometry and ecosystem process rates). ES theory holds the promise to be a unifying concept to link across hierarchical scales of patterns and processes in ecology, but this has not been fully achieved. Therefore, we propose connecting the expertise of aquatic ecologists and biogeochemists with ES theory as a common currency to connect food webs, ecosystem metabolism, and biogeochemistry, as they are inherently concatenated by the transfer of carbon, nitrogen, and phosphorous through biotic and abiotic nutrient transformation and fluxes. Several new studies exist that demonstrate the connections between food web ecology, biogeochemistry, and ecosystem metabolism. In addition to a general introduction into the topic, this paper presents examples of how these fields can be combined with a focus on ES. In this review, a series of concepts have guided the discussion: (1) changing biogeochemistry affects trophic interactions and ecosystem processes by altering the elemental ratios of key species and assemblages; (2) changing trophic dynamics influences the transformation and fluxes of matter across environmental boundaries; (3) changing ecosystem metabolism will alter the chemical diversity of the non-living environment. Finally, we propose that using ES to link nutrient cycling, trophic dynamics, and ecosystem metabolism would allow for a more holistic understanding of ecosystem functions in a changing environment.

Research at the Bedside: It Makes A Difference.

PubMed

Bridges, Elizabeth J

2015-07-01

Research at the bedside makes a difference for our patients, and also for our nurses. However, it is now time to broaden our focus from research on interventions or events at a narrow point in time to research that addresses care across the continuum. This continuum may start at the point of injury, such as the battlefield through en route care delivered during the 8000-mile journey home for our wounded warriors, or for critically ill patients as they move between the emergency department, operating room, and intensive care unit. This focus also requires researchers to consider "care within context," that is, research- and evidence-based practice tailored to the unique conditions of the care environment. Beyond conducting research and developing new knowledge is the challenge of translating evidence into practice. A culture of inquiry is a critical element in the successful translation of evidence into practice. In a culture of inquiry, nurses are encouraged to question and evaluate their practice, provide evidence-based care, and actively participate in and lead clinical inquiry. This article draws from a program of applied clinical research reflecting care across the continuum within both military and civilian health care settings and discusses how the application of these research findings and the advancement of a culture of inquiry make a difference for both patients and nurses. ©2015 American Association of Critical-Care Nurses.

HIFU Monitoring and Control with Dual-Mode Ultrasound Arrays

NASA Astrophysics Data System (ADS)

Casper, Andrew Jacob

The biological effects of high-intensity focused ultrasound (HIFU) have been known and studied for decades. HIFU has been shown capable of treating a wide variety of diseases and disorders. However, despite its demonstrated potential, HIFU has been slow to gain clinical acceptance. This is due, in part, to the difficulty associated with robustly monitoring and controlling the delivery of the HIFU energy. The non-invasive nature of the surgery makes the assessment of treatment progression difficult, leading to long treatment times and a significant risk of under treatment. This thesis research develops new techniques and systems for robustly monitoring HIFU therapies for the safe and efficacious delivery of the intended treatment. Systems and algorithms were developed for the two most common modes of HIFU delivery systems: single-element and phased array applicators. Delivering HIFU with a single element transducer is a widely used technique in HIFU therapies. The simplicity of a single element offers many benefits in terms of cost and overall system complexity. Typical monitoring schemes rely on an external device (e.g. diagnostic ultrasound or MRI) to assess the progression of therapy. The research presented in this thesis explores using the same element to both deliver and monitor the HIFU therapy. The use of a dual-mode ultrasound transducer (DMUT) required the development of an FPGA based single-channel arbitrary waveform generator and high-speed data acquisition unit. Data collected from initial uncontrolled ablations led to the development of monitoring and control algorithms which were implemented directly on the FPGA. Close integration between the data acquisition and arbitrary waveform units allowed for fast, low latency control over the ablation process. Results are presented that demonstrate control of HIFU therapies over a broad range of intensities and in multiple in vitro tissues. The second area of investigation expands the DMUT research to an ultrasound phased-array. The phased-array allows for electronic steering of the HIFU focus and imaging of the acoustic medium. Investigating the dual-mode ultrasound array (DMUA) required the design and construction of a novel ultrasound-guided focused ultrasound (USgFUS) platform. The platform consisted of custom hardware designed for the unique requirements of operating a phased-array in both therapeutic and imaging modes. The platform also required the development of FPGA based signal processing and GPU based beamforming algorithms for online monitoring of the therapy process. The results presented in this thesis represent the first demonstration of a real-time USgFUS platform based around a DMUA. Experimental imaging and therapy results from series of animal experiments, including a 12 animal GLP study, are presented. In addition, in vitro control results, which build upon the DMUT work, are presented.

NASA's Exobiology Program.

PubMed

DeVincenzi, D L

1984-01-01

The goal of NASA's Exobiology Program is to understand the origin, evolution, and distribution of life, and life-related molecules, on Earth and throughout the universe. Emphasis is focused on determining how the rate and direction of these processes were affected by the chemical and physical environment of the evolving planet, as well as by planetary, solar, and astrophysical phenomena. This is accomplished by a multi-disciplinary program of research conducted by over 60 principal investigators in both NASA and university laboratories. Major program thrusts are in the following research areas: biogenic elements; chemical evolution; origin of life; organic geochemistry; evolution of higher life forms; solar system exploration; and the search for extraterrestrial intelligence (SETI).

Ethnic identity in adolescents and adults: review of research.

PubMed

Phinney, J S

1990-11-01

Ethnic identity is central to the psychological functioning of members of ethnic and racial minority groups, but research on the topic is fragmentary and inconclusive. This article is a review of 70 studies of ethnic identity published in refereed journals since 1972. The author discusses the ways in which ethnic identity has been defined and conceptualized, the components that have been measured, and empirical findings. The task of understanding ethnic identity is complicated because the uniqueness that distinguishes each group makes it difficult to draw general conclusions. A focus on the common elements that apply across groups could lead to a better understanding of ethnic identity.

3D-printed adaptive acoustic lens as a disruptive technology for transcranial ultrasound therapy using single-element transducers.

PubMed

Maimbourg, Guillaume; Houdouin, Alexandre; Deffieux, Thomas; Tanter, Mickael; Aubry, Jean-François

2018-01-16

The development of multi-element arrays for better control of the shape of ultrasonic beams has opened the way for focusing through highly aberrating media, such as the human skull. As a result, the use of brain therapy with transcranial-focused ultrasound has rapidly grown. Although effective, such technology is expensive. We propose a disruptive, low-cost approach that consists of focusing a 1 MHz ultrasound beam through a human skull with a single-element transducer coupled with a tailored silicone acoustic lens cast in a 3D-printed mold and designed using computed tomography-based numerical acoustic simulation. We demonstrate on N  =  3 human skulls that adding lens-based aberration correction to a single-element transducer increases the deposited energy on the target 10 fold.

3D-printed adaptive acoustic lens as a disruptive technology for transcranial ultrasound therapy using single-element transducers

NASA Astrophysics Data System (ADS)

Maimbourg, Guillaume; Houdouin, Alexandre; Deffieux, Thomas; Tanter, Mickael; Aubry, Jean-François

2018-01-01

The development of multi-element arrays for better control of the shape of ultrasonic beams has opened the way for focusing through highly aberrating media, such as the human skull. As a result, the use of brain therapy with transcranial-focused ultrasound has rapidly grown. Although effective, such technology is expensive. We propose a disruptive, low-cost approach that consists of focusing a 1 MHz ultrasound beam through a human skull with a single-element transducer coupled with a tailored silicone acoustic lens cast in a 3D-printed mold and designed using computed tomography-based numerical acoustic simulation. We demonstrate on N  =  3 human skulls that adding lens-based aberration correction to a single-element transducer increases the deposited energy on the target 10 fold.

Health-related quality of life research and the capability approach of Amartya Sen.

PubMed

Verkerk, M A; Busschbach, J J; Karssing, E D

2001-01-01

Standardised health-related quality of life questionnaires play an increasing role as measures of outcome in the evaluation of health care interventions. However, problems can arise when the selected functions or dimensions of such standardised measures are not in line with the intervention that is the focus of the research. Furthermore, the subjective element of quality of life makes standardised questionnaires vulnerable to the coping mechanism, thereby decreasing their sensitivity. The capability approach of the economist and philosopher Amartya Sen offers a descriptive concept that contributes to a better understanding of these problems. This article provides an introduction to the ideas of Sen for researchers who wish to go beyond the traditional framework of measuring health-related quality of life.

Overview of research addressing ethical dimensions of participation in traumatic stress studies: autonomy and beneficence.

PubMed

Newman, Elana; Kaloupek, Danny

2009-12-01

One element of the design of human research studies is ethically informed decision-making. Key issues include the safety, costs, and benefits of participation. Historically, much of this decision-making was based on opinion rather than formal evidence. Recently, however, investigators in the traumatic stress field have begun to collect data that are relevant to these decisions. In this article, the authors focus on issues emanating from the ethical concepts of autonomy and respect for persons and beneficence and nonmaleficence, and then summarize relevant evidence from studies with trauma-exposed individuals. Discussion addresses implications of this evidence for research practice and policy, and identifies some potentially informative data collections opportunities for future trauma studies.

Essential elements of self-help/minimal intervention strategies for smoking cessation.

PubMed

Glynn, T J; Boyd, G M; Gruman, J C

1990-01-01

Two decades of research suggest that self-help/minimal intervention strategies for smoking cessation may be the preferred means by which smokers stop and can produce success rates approximating those of more formal programs, at lower cost and with greater access to relevant populations. In order to make the best possible use of these self-help/minimal intervention approaches, the National Cancer Institute (NCI) supported a series of randomized, controlled intervention trials and, in June of 1988, convened an Expert Advisory Panel to address the question "What are the essential elements of self-help/minimal intervention strategies for smoking cessation?". The panel's recommendations were that: (1) Intervention efforts should focus on increasing smokers' motivations to make serious quit attempts; (2) Delivery of programs be broadened to include all smokers; (3) Programs be targeted to stages of cessation and specific populations; (4) All programs include (a) elements focused on health and social consequences of smoking, and (b) strategies and exercises aimed at quitting, maintenance of nonsmoking, relapse prevention, and recycling; (5) Materials and programs be made widely available rather than "fine tuning" existing programs or developing new ones; and (6) Programs make use of specific adjunctive strategies. In this way, a reacceleration of the decline in smoking prevalence may be realized in the 1990s and significantly contribute to the NCI's Year 2000 goals and the Surgeon General's aim of a smoke-free society.

2013 Space Radiation Standing Review Panel Status Review for: The Risk of Acute and Late Central Nervous System Effects from Radiation Exposure, The Risk of Acute Radiation Syndromes Due to Solar Particle Events (SPEs), The Risk Of Degenerative Tissue Or Other Health Effects From Radiation Exposure, and The Risk of Radiation Carcinogenesis

NASA Technical Reports Server (NTRS)

2014-01-01

The Space Radiation Standing Review Panel (from here on referred to as the SRP) was impressed with the strong research program presented by the scientists and staff associated with NASA's Space Radiation Program Element and National Space Biomedical Research Institute (NSBRI). The presentations given on-site and the reports of ongoing research that were provided in advance indicated the potential Risk of Acute and Late Central Nervous System Effects from Radiation Exposure (CNS) and were extensively discussed by the SRP. This new data leads the SRP to recommend that a higher priority should be placed on research designed to identify and understand these risks at the mechanistic level. To support this effort the SRP feels that a shift of emphasis from Acute Radiation Syndromes (ARS) and carcinogenesis to CNS-related endpoints is justified at this point. However, these research efforts need to focus on mechanisms, should follow pace with advances in the field of CNS in general and should consider the specific comments and suggestions made by the SRP as outlined below. The SRP further recommends that the Space Radiation Program Element continue with its efforts to fill the vacant positions (Element Scientist, CNS Risk Discipline Lead) as soon as possible. The SRP also strongly recommends that NASA should continue the NASA Space Radiation Summer School. In addition to these broad recommendations, there are specific comments/recommendations noted for each risk, described in detail below.

Static aeroelastic analysis and tailoring of a single-element racing car wing

NASA Astrophysics Data System (ADS)

Sadd, Christopher James

This thesis presents the research from an Engineering Doctorate research programme in collaboration with Reynard Motorsport Ltd, a manufacturer of racing cars. Racing car wing design has traditionally considered structures to be rigid. However, structures are never perfectly rigid and the interaction between aerodynamic loading and structural flexibility has a direct impact on aerodynamic performance. This interaction is often referred to as static aeroelasticity and the focus of this research has been the development of a computational static aeroelastic analysis method to improve the design of a single-element racing car wing. A static aeroelastic analysis method has been developed by coupling a Reynolds-Averaged Navier-Stokes CFD analysis method with a Finite Element structural analysis method using an iterative scheme. Development of this method has included assessment of CFD and Finite Element analysis methods and development of data transfer and mesh deflection methods. Experimental testing was also completed to further assess the computational analyses. The computational and experimental results show a good correlation and these studies have also shown that a Navier-Stokes static aeroelastic analysis of an isolated wing can be performed at an acceptable computational cost. The static aeroelastic analysis tool was used to assess methods of tailoring the structural flexibility of the wing to increase its aerodynamic performance. These tailoring methods were then used to produce two final wing designs to increase downforce and reduce drag respectively. At the average operating dynamic pressure of the racing car, the computational analysis predicts that the downforce-increasing wing has a downforce of C[1]=-1.377 in comparison to C[1]=-1.265 for the original wing. The computational analysis predicts that the drag-reducing wing has a drag of C[d]=0.115 in comparison to C[d]=0.143 for the original wing.

Dual stage beamforming in the absence of front-end receive focusing

NASA Astrophysics Data System (ADS)

Bera, Deep; Bosch, Johan G.; Verweij, Martin D.; de Jong, Nico; Vos, Hendrik J.

2017-08-01

Ultrasound front-end receive designs for miniature, wireless, and/or matrix transducers can be simplified considerably by direct-element summation in receive. In this paper we develop a dual-stage beamforming technique that is able to produce a high-quality image from scanlines that are produced with focused transmit, and simple summation in receive (no delays). We call this non-delayed sequential beamforming (NDSB). In the first stage, low-resolution RF scanlines are formed by simple summation of element signals from a running sub-aperture. In the second stage, delay-and-sum beamforming is performed in which the delays are calculated considering the transmit focal points as virtual sources emitting spherical waves, and the sub-apertures as large unfocused receive elements. The NDSB method is validated with simulations in Field II. For experimental validation, RF channel data were acquired with a commercial research scanner using a 5 MHz linear array, and were subsequently processed offline. For NDSB, good average lateral resolution (0.99 mm) and low grating lobe levels (<-40 dB) were achieved by choosing the transmit {{F}\\#} as 0.75 and the transmit focus at 15 mm. NDSB was compared with conventional dynamic receive focusing (DRF) and synthetic aperture sequential beamforming (SASB) with their own respective optimal settings. The full width at half maximum of the NDSB point spread function was on average 20% smaller than that of DRF except for at depths  <30 mm and 10% larger than SASB considering all the depths. NDSB showed only a minor degradation in contrast-to-noise ratio and contrast ratio compared to DRF and SASB when measured on an anechoic cyst embedded in a tissue-mimicking phantom. In conclusion, using simple receive electronics front-end, NDSB can attain an image quality better than DRF and slightly inferior to SASB.

A research strategy case study of alcohol and drug prevention by non-governmental organizations in Sweden 2003-2009.

PubMed

Eriksson, Charli; Geidne, Susanna; Larsson, Madelene; Pettersson, Camilla

2011-04-14

Alcohol and drug prevention is high on the public health agenda in many countries. An increasing trend is the call for evidence-based practice. In Sweden in 2002 an innovative project portfolio including an integrated research and competence-building strategy for non-governmental organisations (NGOs) was designed by the National Board of Health and Welfare (NBHW). This research strategy case study is based on this initiative. The embedded case study includes 135 projects in 69 organisations and 14 in-depth process or effect studies. The data in the case study has been compiled using multiple methods - administrative data; interviews and questionnaires to project leaders; focus group discussions and seminars; direct and participatory observations, interviews, and documentation of implementation; consultations with the NBHW and the NGOs; and a literature review. Annual reports have been submitted each year and three bi-national conferences Reflections on preventions have been held. A broad range of organisations have been included in the NBHW project portfolio. A minority of the project were run by Alcohol or drug organisations, while a majority has children or adolescents as target groups. In order to develop a trustful partnership between practitioners, national agencies and researchers a series of measures were developed and implemented: meeting with project leaders, project dialogues and consultations, competence strengthening, support to documentation, in-depth studies and national conferences. A common element was that the projects were program-driven and not research-driven interventions. The role of researchers-as-technical advisors was suitable for the fostering of a trustful partnership for research and development. The independence of the NGOs was regarded as important for the momentum in the project implementation. The research strategy also includes elements of participatory research. This research strategy case study shows that it is possible to integrate research into alcohol and drug prevention programs run by NGOs, and thereby contribute to a more evidence-based practice. A core element is developing a trustful partnership between the researchers and the organisations. Moreover, the funding agency must acknowledge the importance of knowledge development and allocating resources to research groups that is capable of cooperating with practitioners and NGOs.

Research-based-decision-making in Canadian health organizations: a behavioural approach.

PubMed

Jbilou, Jalila; Amara, Nabil; Landry, Réjean

2007-06-01

Decision making in Health sector is affected by a several elements such as economic constraints, political agendas, epidemiologic events, managers' values and environment... These competing elements create a complex environment for decision making. Research-Based-Decision-Making (RBDM) offers an opportunity to reduce the generated uncertainty and to ensure efficacy and efficiency in health administrations. We assume that RBDM is dependant on decision makers' behaviour and the identification of the determinants of this behaviour can help to enhance research results utilization in health sector decision making. This paper explores the determinants of RBDM as a personal behaviour among managers and professionals in health administrations in Canada. From the behavioural theories and the existing literature, we build a model measuring "RBDM" as an index based on five items. These items refer to the steps accomplished by a decision maker while developing a decision which is based on evidence. The determinants of RBDM behaviour are identified using data collected from 942 health care decision makers in Canadian health organizations. Linear regression is used to model the behaviour RBDM. Determinants of this behaviour are derived from Triandis Theory and Bandura's construct "self-efficacy." The results suggest that to improve research use among managers in Canadian governmental health organizations, strategies should focus on enhancing exposition to evidence through facilitating communication networks, partnerships and links between researchers and decision makers, with the key long-term objective of developing a culture that supports and values the contribution that research can make to decision making in governmental health organizations. Nevertheless, depending on the organizational level, determinants of RBDM are different. This difference has to be taken into account if RBDM adoption is desired. Decision makers in Canadian health organizations (CHO) can help to build networks, develop partnerships between professionals locally, regionally and nationally, and also act as change agents in the dissemination and adoption of knowledge and innovations in health services. However, the research focused on knowledge use as a support to decision-making, further research is needed to identify and evaluate effective incentives and strategies to implement so as to enhance RBDM adoption among health decision makers and more theoretical development are to complete in this perspective.

Alternatives to antibiotics as growth promoters for use in swine production: a review

PubMed Central

2013-01-01

In the past two decades, an intensive amount of research has been focused on the development of alternatives to antibiotics to maintain swine health and performance. The most widely researched alternatives include probiotics, prebiotics, acidifiers, plant extracts and neutraceuticals such as copper and zinc. Since these additives have been more than adequately covered in previous reviews, the focus of this review will be on less traditional alternatives. The potential of antimicrobial peptides, clay minerals, egg yolk antibodies, essential oils, eucalyptus oil-medium chain fatty acids, rare earth elements and recombinant enzymes are discussed. Based on a thorough review of the literature, it is evident that a long and growing list of compounds exist which have been tested for their ability to replace antibiotics as feed additives in diets fed to swine. Unfortunately, the vast majority of these compounds produce inconsistent results and rarely equal antibiotics in their effectiveness. Therefore, it would appear that research is still needed in this area and that the perfect alternative to antibiotics does not yet exist. PMID:24034214

Case conceptualization research in cognitive behavior therapy: A state of the science review.

PubMed

Easden, Michael H; Kazantzis, Nikolaos

2018-03-01

Prominent models of cognitive behavior therapy (CBT) assert that case conceptualization is crucial for tailoring interventions to adequately address the needs of the individual client. We aimed to review the research on case conceptualization in CBT. We conducted a systematic search of PsychINFO, MEDLINE, Psychology and Behavioral Science Collection, and CINAHL databases to February 2016. A total of 24 studies that met inclusion criteria were identified. It was notable that studies (a) focused on the assessment function of case conceptualization, (b) employed diverse methodologies, and, overall, (c) there remains a paucity of studies examining the in-session process of using case conceptualization or examining relations with outcome. Results from the existing studies suggest that experienced therapists can reliably construct some elements of case conceptualizations, but importance for the efficacy of case conceptualization in CBT has yet to be demonstrated. Research that involves direct observation of therapist competence in case conceptualization as a predictor of CBT outcomes is recommended as a focus for future hypothesis testing. © 2017 Wiley Periodicals, Inc.

Modeling, Simulation, and Measurement of Balanced Antipodal Vivaldi (BAV) Antennas for Fully Polarimetric Forward-Looking Ground-Penetrating Radar (FLGPR) Receive Channels

DTIC Science & Technology

2017-08-01

compared against the current receiver. The focus of the design was to maximize low-frequency performance, particularly below 1.0 GHz. The current...Department of the Army position unless so designated by other authorized documents. Citation of manufacturer’s or trade names does not constitute an...documents the design , simulation, and measurement of balanced antipodal Vivaldi (BAV) antenna elements for the receive channels of a US Army Research

Overview of the NCC

NASA Technical Reports Server (NTRS)

Liu, Nan-Suey

2001-01-01

A multi-disciplinary design/analysis tool for combustion systems is critical for optimizing the low-emission, high-performance combustor design process. Based on discussions between then NASA Lewis Research Center and the jet engine companies, an industry-government team was formed in early 1995 to develop the National Combustion Code (NCC), which is an integrated system of computer codes for the design and analysis of combustion systems. NCC has advanced features that address the need to meet designer's requirements such as "assured accuracy", "fast turnaround", and "acceptable cost". The NCC development team is comprised of Allison Engine Company (Allison), CFD Research Corporation (CFDRC), GE Aircraft Engines (GEAE), NASA Glenn Research Center (LeRC), and Pratt & Whitney (P&W). The "unstructured mesh" capability and "parallel computing" are fundamental features of NCC from its inception. The NCC system is composed of a set of "elements" which includes grid generator, main flow solver, turbulence module, turbulence and chemistry interaction module, chemistry module, spray module, radiation heat transfer module, data visualization module, and a post-processor for evaluating engine performance parameters. Each element may have contributions from several team members. Such a multi-source multi-element system needs to be integrated in a way that facilitates inter-module data communication, flexibility in module selection, and ease of integration. The development of the NCC beta version was essentially completed in June 1998. Technical details of the NCC elements are given in the Reference List. Elements such as the baseline flow solver, turbulence module, and the chemistry module, have been extensively validated; and their parallel performance on large-scale parallel systems has been evaluated and optimized. However the scalar PDF module and the Spray module, as well as their coupling with the baseline flow solver, were developed in a small-scale distributed computing environment. As a result, the validation of the NCC beta version as a whole was quite limited. Current effort has been focused on the validation of the integrated code and the evaluation/optimization of its overall performance on large-scale parallel systems.

Screen-Printed Electrodes Modified with “Green” Metals for Electrochemical Stripping Analysis of Toxic Elements

PubMed Central

Economou, Anastasios

2018-01-01

This work reviews the field of screen-printed electrodes (SPEs) modified with “green” metals for electrochemical stripping analysis of toxic elements. Electrochemical stripping analysis has been established as a useful trace analysis technique offering many advantages compared to competing optical techniques. Although mercury has been the preferred electrode material for stripping analysis, the toxicity of mercury and the associated legal requirements in its use and disposal have prompted research towards the development of “green” metals as alternative electrode materials. When combined with the screen-printing technology, such environment-friendly metals can lead to disposable sensors for trace metal analysis with excellent operational characteristics. This review focuses on SPEs modified with Au, Bi, Sb, and Sn for stripping analysis of toxic elements. Different modification approaches (electroplating, bulk modification, use of metal precursors, microengineering techniques) are considered and representative applications are described. A developing related field, namely biosensing based on stripping analysis of metallic nanoprobe labels, is also briefly mentioned. PMID:29596391

Screen-Printed Electrodes Modified with "Green" Metals for Electrochemical Stripping Analysis of Toxic Elements.

PubMed

Economou, Anastasios

2018-03-29

This work reviews the field of screen-printed electrodes (SPEs) modified with "green" metals for electrochemical stripping analysis of toxic elements. Electrochemical stripping analysis has been established as a useful trace analysis technique offering many advantages compared to competing optical techniques. Although mercury has been the preferred electrode material for stripping analysis, the toxicity of mercury and the associated legal requirements in its use and disposal have prompted research towards the development of "green" metals as alternative electrode materials. When combined with the screen-printing technology, such environment-friendly metals can lead to disposable sensors for trace metal analysis with excellent operational characteristics. This review focuses on SPEs modified with Au, Bi, Sb, and Sn for stripping analysis of toxic elements. Different modification approaches (electroplating, bulk modification, use of metal precursors, microengineering techniques) are considered and representative applications are described. A developing related field, namely biosensing based on stripping analysis of metallic nanoprobe labels, is also briefly mentioned.

On Heat Transfer - Stress Analysis of Modified Brick (Reed Filler) Upon Its Production Stage

NASA Astrophysics Data System (ADS)

Ornam, Kurniati; Kimsan, Masykur; Teguh Prakasa, Cadas; Ode Ngkoimani, La; Santi

2017-05-01

This paper aimed to scrutinize how burning process in modified brick’s production impinge on crack as a result of stress differentiation between two consecutive layers of the brick’s element. Diffusion engages in burning process of bricks, hence it generates thermal stress on element for different temperature between layers. This research focused on burning process in traditional production ward. Analytical of nonlinear equation and numerical solution, finite difference, were involved to obtain temperature value in each layer, followed by stress calculation. Based on the results, it can be concluded that crack occurs particularly on boundary area, since difussion tends to yield relatively more different value on it. Therefore, certain strategies, that may decrease this differentiation, are required to minimize number of cracks during brick’s production.

Optofluidic Approaches for Enhanced Microsensor Performances

PubMed Central

Testa, Genni; Persichetti, Gianluca; Bernini, Romeo

2015-01-01

Optofluidics is a relatively young research field able to create a tight synergy between optics and micro/nano-fluidics. The high level of integration between fluidic and optical elements achievable by means of optofluidic approaches makes it possible to realize an innovative class of sensors, which have been demonstrated to have an improved sensitivity, adaptability and compactness. Many developments in this field have been made in the last years thanks to the availability of a new class of low cost materials and new technologies. This review describes the Italian state of art on optofluidic devices for sensing applications and offers a perspective for further future advances. We introduce the optofluidic concept and describe the advantages of merging photonic and fluidic elements, focusing on sensor developments for both environmental and biomedical monitoring. PMID:25558989

Propel: A Discontinuous-Galerkin Finite Element Code for Solving the Reacting Navier-Stokes Equations

NASA Astrophysics Data System (ADS)

Johnson, Ryan; Kercher, Andrew; Schwer, Douglas; Corrigan, Andrew; Kailasanath, Kazhikathra

2017-11-01

This presentation focuses on the development of a Discontinuous Galerkin (DG) method for application to chemically reacting flows. The in-house code, called Propel, was developed by the Laboratory of Computational Physics and Fluid Dynamics at the Naval Research Laboratory. It was designed specifically for developing advanced multi-dimensional algorithms to run efficiently on new and innovative architectures such as GPUs. For these results, Propel solves for convection and diffusion simultaneously with detailed transport and thermodynamics. Chemistry is currently solved in a time-split approach using Strang-splitting with finite element DG time integration of chemical source terms. Results presented here show canonical unsteady reacting flow cases, such as co-flow and splitter plate, and we report performance for higher order DG on CPU and GPUs.

Synchronization in complex networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arenas, A.; Diaz-Guilera, A.; Moreno, Y.

Synchronization processes in populations of locally interacting elements are in the focus of intense research in physical, biological, chemical, technological and social systems. The many efforts devoted to understand synchronization phenomena in natural systems take now advantage of the recent theory of complex networks. In this review, we report the advances in the comprehension of synchronization phenomena when oscillating elements are constrained to interact in a complex network topology. We also overview the new emergent features coming out from the interplay between the structure and the function of the underlying pattern of connections. Extensive numerical work as well as analyticalmore » approaches to the problem are presented. Finally, we review several applications of synchronization in complex networks to different disciplines: biological systems and neuroscience, engineering and computer science, and economy and social sciences.« less

Spectroscopic Studies of Pre-Biotic Carbon Chemistry

NASA Technical Reports Server (NTRS)

Blake, Geoffrey A.

2003-01-01

As described in the original proposal and in our progress reports, research in the Blake group supported by the Exobiology program seeks to understand the pre-biotic chemistry of carbon along with that of other first- and second-row elements from the earliest stages of star formation through the development of planetary systems. The major tool used is spectroscopy, and the program has observational, laboratory, and theoretical components. The observational and theoretical programs are concerned primarily with a quantitative assessment of the chemical budgets of the biogenic elements in the circumstellar environment of forming stars and planetary systems, while the laboratory work is focused on the complex species that characterize the pre-biotic chemistry of carbon. We outline below our results over the past year acquired, in part, with Exobiology support.

Understanding stakeholder participation in research as part of sustainable development.

PubMed

Bell, Simon; Morse, Stephen; Shah, Rupesh A

2012-06-30

Participation is often presented as a 'good' thing and a fairer way to represent views and opinions outside narrow confines of interest and expertise. However, the roots of participatory approaches within research contexts are deep and numerous twists and turns demonstrate a confused and possibly confusing morphology with significant gaps and weaknesses. In this paper 'via the medium' of the POINT (Policy Influence of Indicators) research project we trace elements of the recent history of group participation in sustainable development and the emergence of focus on four areas, most significantly how participatory methods are used. In the absence of strong evidence to contrary we suggest that the issue of how participants engage in participation remains a significant weakness for the field. In order to counter the apparent gap we suggest that a certain degree of structure and process can provide the oeuvre of participatory approaches with a higher degree of transparency in the research process and, by focus on the use of a method called Triple Task, group participatory events can be encouraged to yield greater insights into the workings of groups of all kinds. Copyright © 2012 Elsevier Ltd. All rights reserved.

Modeling focusing characteristics of low Fnumber diffractive optical elements with continuous relief fabricated by laser direct writing.

PubMed

Shan, Mingguang; Tan, Jiubin

2007-12-10

A theoretical model is established using Rayleigh-Sommerfeld diffraction theory to describe the diffraction focusing characteristics of low F-number diffractive optical elements with continuous relief fabricated by laser direct writing, and continuous-relief diffractive optical elements with a design wavelength of 441.6nm and a F-number of F/4 are fabricated and measured to verify the validity of the diffraction focusing model. The measurements made indicate that the spot size is 1.75mum and the diffraction efficiency is 70.7% at the design wavelength, which coincide well with the theoretical results: a spot size of 1.66mum and a diffraction efficiency of 71.2%.

PREFACE: Focus section on superconducting power systems Focus section on superconducting power systems

NASA Astrophysics Data System (ADS)

Cardwell, D. A.; Amemiya, N.; Fair, R.

2012-01-01

This focus section of Superconductor Science and Technology looks at the properties, technology and applications of (RE)BCO and MgB2 based superconductors for power engineering systems. Both bulk and conductor forms of material are addressed, including elements of materials fabrication and processing, and the measurement of their applied properties for various levels of system application. The areas of research include ac losses in type II materials in power devices, cables and coated conductors, the development of high current dc cables and the application of superconductors in levitation devices, motors and fault current limiters. This focus section presents a broad cross-section of contemporary issues, that represent state-of-the-art for power applications of superconductors, and highlights the areas that require further development if commercial applications of these rapidly emerging materials are to be realised. It contains papers from some of the major groups in the field, including contributions from Europe, the USA and Japan, and describes devices that are relatively close to market.

Social Marketing and Breastfeeding: A Literature Review

PubMed Central

Schmidt, Manuela

2013-01-01

Aims: Through the review of relevant literature this study illuminates the concepts of social marketing and breastfeeding. It specifically discusses the positioning of the link between social marketing and breastfeeding within different fields of study and develops a theoretical framework that tries to bridge the gap between those disciplines. Method: Various electronic databases were used and through systematic selection 11 scientific articles were identified that this literature review is based on. Results: The review indicates that the relationship between social marketing and breastfeeding is complex. There are indications that this relationship is being investigated within three distinct fields of research: psychology/education, public health and marketing. Depending on the research field the emphasis is put on either breastfeeding or social marketing as well as on the other concepts that were discovered to be of importance within this relationship. Namely, group and individual demography as well as behaviour were revealed to be important elements of the link between social marketing and breastfeeding. Conclusions: Based on the results this study concludes that a more multidimensional view on the relationship between the concepts under study is needed since the focus of previous studies is very one-sided and limited to just one element when all elements should be integrated equally. PMID:23618478

A finite element model to assess transtibial prosthetic sockets with elastomeric liners.

PubMed

Cagle, John C; Reinhall, Per G; Allyn, Kate J; McLean, Jake; Hinrichs, Paul; Hafner, Brian J; Sanders, Joan E

2017-12-13

People with transtibial amputation often experience skin breakdown due to the pressures and shear stresses that occur at the limb-socket interface. The purpose of this research was to create a transtibial finite element model (FEM) of a contemporary prosthesis that included complete socket geometry, two frictional interactions (limb-liner and liner-socket), and an elastomeric liner. Magnetic resonance imaging scans from three people with characteristic transtibial limb shapes (i.e., short-conical, long-conical, and cylindrical) were acquired and used to develop the models. Each model was evaluated with two loading profiles to identify locations of focused stresses during stance phase. The models identified five locations on the participants' residual limbs where peak stresses matched locations of mechanically induced skin issues they experienced in the 9 months prior to being scanned. The peak contact pressure across all simulations was 98 kPa and the maximum resultant shear stress was 50 kPa, showing reasonable agreement with interface stress measurements reported in the literature. Future research could take advantage of the developed FEM to assess the influence of changes in limb volume or liner material properties on interface stress distributions. Graphical abstract Residual limb finite element model. Left: model components. Right: interface pressures during stance phase.

Trace element bias in the use of CO2 vents as analogues for low pH environments: Implications for contamination levels in acidified oceans

NASA Astrophysics Data System (ADS)

Vizzini, S.; Di Leonardo, R.; Costa, V.; Tramati, C. D.; Luzzu, F.; Mazzola, A.

2013-12-01

Research into the effects of ocean acidification on marine ecosystems has increasingly focused on natural CO2 vents, although their intrinsic environmental complexity means observations from these areas may not relate exclusively to pH gradients. In order to assess trace element levels and distribution in the Levante Bay (Vulcano Island, NE Sicily, Italy) and its suitability for studying biological effects of pH decline, Ba, Fe and trace elements (As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, V and Zn) in sediment were analysed from 7 transects. Where present, Cymodocea nodosa leaves and epiphytes were also analysed. At the spatial scale of the bay, trace element concentrations in sediments and biota showed wide variability, possibly related to both input from fluid emissions and seawater physico-chemical variables (i.e. pH and Eh), which may considerably affect the solubility and bioavailability of potentially harmful trace elements. According to two pollution indices (MSPI: Marine Sediment Pollution Index and SQG-Q: Sediment Quality Guideline Quotient), the bay can be considered to be affected by low contamination with moderate potential for adverse biological effects, especially in the area between about 150 and 350 m from the primary vent, where localized detrimental effects on biota may occur. Generally, biological samples showed concentrations that were comparable with the lower values of seagrass ranges. The overall results of this study support the complex spatial dynamics of trace elements in the CO2 vent studied, which are constrained by both direct input from the vent and/or biogeochemical processes affecting element precipitation at the sediment-seawater interface. Consequently, great caution should be used when relating biological changes along pH gradients to the unifactorial effect of pH only, as interactions with concurrent, multiple stressors, including trace element enrichments, may occur. This finding has implications for the use of CO2 vents as analogues in ocean acidification research. They should be considered more appropriately as analogues for low pH environments with non-negligible trace element contamination which, in a scenario of continuous increase in anthropogenic pollution, may be very common.

3-D modeling of ductile tearing using finite elements: Computational aspects and techniques

NASA Astrophysics Data System (ADS)

Gullerud, Arne Stewart

This research focuses on the development and application of computational tools to perform large-scale, 3-D modeling of ductile tearing in engineering components under quasi-static to mild loading rates. Two standard models for ductile tearing---the computational cell methodology and crack growth controlled by the crack tip opening angle (CTOA)---are described and their 3-D implementations are explored. For the computational cell methodology, quantification of the effects of several numerical issues---computational load step size, procedures for force release after cell deletion, and the porosity for cell deletion---enables construction of computational algorithms to remove the dependence of predicted crack growth on these issues. This work also describes two extensions of the CTOA approach into 3-D: a general 3-D method and a constant front technique. Analyses compare the characteristics of the extensions, and a validation study explores the ability of the constant front extension to predict crack growth in thin aluminum test specimens over a range of specimen geometries, absolutes sizes, and levels of out-of-plane constraint. To provide a computational framework suitable for the solution of these problems, this work also describes the parallel implementation of a nonlinear, implicit finite element code. The implementation employs an explicit message-passing approach using the MPI standard to maintain portability, a domain decomposition of element data to provide parallel execution, and a master-worker organization of the computational processes to enhance future extensibility. A linear preconditioned conjugate gradient (LPCG) solver serves as the core of the solution process. The parallel LPCG solver utilizes an element-by-element (EBE) structure of the computations to permit a dual-level decomposition of the element data: domain decomposition of the mesh provides efficient coarse-grain parallel execution, while decomposition of the domains into blocks of similar elements (same type, constitutive model, etc.) provides fine-grain parallel computation on each processor. A major focus of the LPCG solver is a new implementation of the Hughes-Winget element-by-element (HW) preconditioner. The implementation employs a weighted dependency graph combined with a new coloring algorithm to provide load-balanced scheduling for the preconditioner and overlapped communication/computation. This approach enables efficient parallel application of the HW preconditioner for arbitrary unstructured meshes.

Sensors 2000! Program: Advanced Biosensor and Measurement Systems Technologies for Spaceflight Research and Concurrent, Earth-Based Applications

NASA Technical Reports Server (NTRS)

Hines, J.

1999-01-01

Sensors 2000! (S2K!) is a specialized, integrated projects team organized to provide focused, directed, advanced biosensor and bioinstrumentation systems technology support to NASA's spaceflight and ground-based research and development programs. Specific technology thrusts include telemetry-based sensor systems, chemical/ biological sensors, medical and physiological sensors, miniaturized instrumentation architectures, and data and signal processing systems. A concurrent objective is to promote the mutual use, application, and transition of developed technology by collaborating in academic-commercial-govemment leveraging, joint research, technology utilization and commercialization, and strategic partnering alliances. Sensors 2000! is organized around three primary program elements: Technology and Product Development, Technology infusion and Applications, and Collaborative Activities. Technology and Product Development involves development and demonstration of biosensor and biotelemetry systems for application to NASA Space Life Sciences Programs; production of fully certified spaceflight hardware and payload elements; and sensor/measurement systems development for NASA research and development activities. Technology Infusion and Applications provides technology and program agent support to identify available and applicable technologies from multiple sources for insertion into NASA's strategic enterprises and initiatives. Collaborative Activities involve leveraging of NASA technologies with those of other government agencies, academia, and industry to concurrently provide technology solutions and products of mutual benefit to participating members.

A 1372-element Large Scale Hemispherical Ultrasound Phased Array Transducer for Noninvasive Transcranial Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Song, Junho; Hynynen, Kullervo; Medical Biophysics, University of Toronto, ON, M4N 3M5

2009-04-14

Noninvasive transcranial therapy using high intensity focused ultrasound transducers has attracted high interest as a promising new modality for the treatments of brain related diseases. We describe the development of a 1372 element large scale hemispherical ultrasound phased array transducer operating at a resonant frequency of 306 kHz. The hemispherical array has a diameter of 31 cm and a 15.5 cm radius of curvature. It is constructed with piezoelectric (PZT-4) tube elements of a 10 mm in diameter, 6 mm in length and 1.4 mm wall thickness. Each element is quasi-air backed by attaching a cork-rubber membrane on the backmore » of the element. The acoustic efficiency of the element is determined to be approximately 50%. The large number of the elements delivers high power ultrasound and offers better beam steering and focusing capability. Comparisons of sound pressure-squared field measurements with theoretical calculations in water show that the array provides good beam steering and tight focusing capability over an efficient volume of approximately 100x100x80 mm{sup 3} with nominal focal spot size of approximately 2.3 mm in diameter at -6 dB. We also present its beam steering and focusing capability through an ex vivo human skull by measuring pressure-squared amplitude after phase corrections. These measurements show the same efficient volume range and focal spot sizes at -6 dB as the ones in water without the skull present. These results indicate that the array is sufficient for use in noninvasive transcranial ultrasound therapy.« less

Design of HIFU transducers to generate specific nonlinear ultrasound fields.

PubMed

Khokhlova, Vera A; Yuldashev, Petr V; Rosnitskiy, Pavel B; Maxwell, Adam D; Kreider, Wayne; Bailey, Michael R; Sapozhnikov, Oleg A

2016-01-01

Various clinical applications of high intensity focused ultrasound (HIFU) have different requirements on the pressure level and degree of nonlinear waveform distortion at the focus. Applications that utilize nonlinear waves with developed shocks are of growing interest, for example, for mechanical disintegration as well as for accelerated thermal ablation of tissue. In this work, an inverse problem of determining transducer parameters to enable formation of shocks with desired amplitude at the focus is solved. The solution was obtained by performing multiple direct simulations of the parabolic Khokhlov-Zabolotskaya-Kuznetsov (KZK) equation for various parameters of the source. It is shown that results obtained within the parabolic approximation can be used to describe the focal region of single element spherical sources as well as complex transducer arrays. It is also demonstrated that the focal pressure level at which fully developed shocks are formed mainly depends on the focusing angle of the source and only slightly depends on its aperture and operating frequency. Using the simulation results, a 256-element HIFU array operating at 1.5 MHz frequency was designed for a specific application of boiling-histotripsy that relies on the presence of 90-100 MPa shocks at the focus. The size of the array elements and focusing angle of the array were chosen to satisfy technical limitations on the intensity at the array elements and desired shock amplitudes in the focal waveform. Focus steering capabilities of the array were analysed using an open-source T-Array software developed at Moscow State University.

Design of HIFU Transducers to Generate Specific Nonlinear Ultrasound Fields

NASA Astrophysics Data System (ADS)

Khokhlova, Vera A.; Yuldashev, Petr V.; Rosnitskiy, Pavel B.; Maxwell, Adam D.; Kreider, Wayne; Bailey, Michael R.; Sapozhnikov, Oleg A.

Various clinical applications of high intensity focused ultrasound (HIFU) have different requirements on the pressure level and degree of nonlinear waveform distortion at the focus. Applications that utilize nonlinear waves with developed shocks are of growing interest, for example, for mechanical disintegration as well as for accelerated thermal ablation oftissue. In this work, an inverse problem of determining transducer parameters to enable formation of shockswith desired amplitude at the focus is solved. The solution was obtained by performing multipledirect simulations of the parabolic Khokhlov-Zabolotskaya-Kuznetsov (KZK) equation for various parameters of the source. It is shown that results obtained within the parabolic approximation can be used to describe the focal region of single element spherical sourcesas well as complex transducer arrays. It is also demonstrated that the focal pressure level at which fully developed shocksare formed mainly depends on the focusing angle of the source and only slightly depends on its aperture and operating frequency. Using the simulation results, a 256-element HIFU array operating at 1.5 MHz frequency was designed for a specific application of boiling-histotripsy that relies on the presence of 90-100 MPa shocks at the focus. The size of the array elements and focusing angle of the array were chosen to satisfy technical limitations on the intensity at the array elements and desired shock amplitudes in the focal waveform. Focus steering capabilities of the array were analysed using an open-source T-Array software developed at Moscow State University.

Wind River watershed restoration, annual report November 2009 to October 2010.

USGS Publications Warehouse

Connolly, P.J.; Jezorek, I.G.

2011-01-01

This report summarizes work completed by U.S. Geological Survey’s Columbia River Research Laboratory (USGS-CRRL) in the Wind River subbasin during the period November 2009 through October 2010 under Bonneville Power Administration (BPA) contract 46102. Long term research in the Wind River has focused on assessments of steelhead/rainbow trout Oncorhynchus mykiss populations, interactions with introduced populations of spring Chinook salmon O. tshawytscha and brook trout Salvelinus fontinalis, and influences of habitat variables and habitat restoration on fish productivity. During the period covered by this report, we collected water temperature data to characterize variation within and among tributaries and mainstem sections in the Trout Creek watershed, and assisted Washington Department of Fish and Wildlife (WDFW) with smolt trapping and tagging of smolt and parr steelhead with passive integrated transponder (PIT) tags. We also continued to maintain and test efficacy of a passive integrated transponder tag interrogation system (PTIS) in Trout Creek for assessing the adult steelhead runsize. A statement of work (SOW) was submitted to BPA in October 2009 that outlined work to be performed by USGS-CRRL. The SOW was organized by work elements, with each describing a research task. This report summarizes the progress completed under each work element.

Some Thoughts on Stability in Nonlinear Periodic Focusing Systems

DOE R&D Accomplishments Database

McMillan, E. M.

1967-09-05

A brief discussion is given of the long-term stability of particle motions through periodic focusing structures containing lumped nonlinear elements. A method is presented whereby one can specify the nonlinear elements in such a way as to generate a variety of structures in which the motion has long-term stability.

Martian Analogue Sample Characterization and Spectral Library Development at the Johnson Space Center

NASA Technical Reports Server (NTRS)

Morris, Richard V.

2002-01-01

An extensive collection of Martian analogue samples housed at the Johnson Space Center is the focus of ongoing research by the JSC Mars soil genesis group and their collaborators. Because the major element composition of Martian meteorites and in situ analyses of Martian soils and rocks indicate that Mars is predominantly an iron-rich basaltic world, the focus of active sample collection and analysis is basaltic materials and their hydrolytic (both aqueous and hydrothermal) and sulfatetic alteration products. Described below are the scope of the JSC Mars analogue sample collection, the characterization process, and plans to incorporate the data into spectral libraries for the Mars 2003 Mars Exploration Rover (MER) and Mars 2005 Mars Reconnaissance Orbiter (MRO) CRISM missions.

Advancement of Optical Component Control for an Imaging Fabry-Perot Interferometer

NASA Technical Reports Server (NTRS)

Larar, Allen M.; Cook, William B.; Flood, Michael A.; Campbell, Joel F.; Boyer, Charles M.

2009-01-01

Risk mitigation activities associated with a prototype imaging Fabry-Perot Interferometer (FPI) system are continuing at the NASA Langley Research Center. The system concept and technology center about enabling and improving future space-based atmospheric composition missions, with a current focus on observing tropospheric ozone around 9.6 micron, while having applicability toward measurement in different spectral regions and other applications. Recent activities have focused on improving an optical element control subsystem to enable precise and accurate positioning and control of etalon plates; this is needed to provide high system spectral fidelity critical for enabling the required ability to spectrally-resolve atmospheric line structure. The latest results pertaining to methodology enhancements, system implementation, and laboratory characterization testing will be reported

Aberration compensation of an ultrasound imaging instrument with a reduced number of channels.

PubMed

Jiang, Wei; Astheimer, Jeffrey P; Waag, Robert C

2012-10-01

Focusing and imaging qualities of an ultrasound imaging system that uses aberration correction were experimentally investigated as functions of the number of parallel channels. Front-end electronics that consolidate signals from multiple physical elements can be used to lower hardware and computational costs by reducing the number of parallel channels. However, the signals from sparse arrays of synthetic elements yield poorer aberration estimates. In this study, aberration estimates derived from synthetic arrays of varying element sizes are evaluated by comparing compensated receive focuses, compensated transmit focuses, and compensated b-scan images of a point target and a cyst phantom. An array of 80 x 80 physical elements with a pitch of 0.6 x 0.6 mm was used for all of the experiments and the aberration was produced by a phantom selected to mimic propagation through abdominal wall. The results show that aberration correction derived from synthetic arrays with pitches that have a diagonal length smaller than 70% of the correlation length of the aberration yield focuses and images of approximately the same quality. This connection between correlation length of the aberration and synthetic element size provides a guideline for determining the number of parallel channels that are required when designing imaging systems that employ aberration correction.

Design of HIFU transducers for generating specified nonlinear ultrasound fields

PubMed Central

Rosnitskiy, Pavel B.; Yuldashev, Petr V.; Sapozhnikov, Oleg A.; Maxwell, Adam; Kreider, Wayne; Bailey, Michael R.; Khokhlova, Vera A.

2016-01-01

Various clinical applications of high intensity focused ultrasound (HIFU) have different requirements for the pressure levels and degree of nonlinear waveform distortion at the focus. The goal of this work was to determine transducer design parameters that produce either a specified shock amplitude in the focal waveform or specified peak pressures while still maintaining quasilinear conditions at the focus. Multi-parametric nonlinear modeling based on the KZK equation with an equivalent source boundary condition was employed. Peak pressures, shock amplitudes at the focus, and corresponding source outputs were determined for different transducer geometries and levels of nonlinear distortion. Results are presented in terms of the parameters of an equivalent single-element, spherically shaped transducer. The accuracy of the method and its applicability to cases of strongly focused transducers were validated by comparing the KZK modeling data with measurements and nonlinear full-diffraction simulations for a single-element source and arrays with 7 and 256 elements. The results provide look-up data for evaluating nonlinear distortions at the focus of existing therapeutic systems as well as for guiding the design of new transducers that generate specified nonlinear fields. PMID:27775904

Between the Rock and a Hard Place: The CCMC as a Transit Station Between Modelers and Forecasters

NASA Technical Reports Server (NTRS)

Hesse, Michael

2009-01-01

The Community Coordinated Modeling Center (CCMC) is a US inter-agency activity aiming at research in support of the generation of advanced space weather models. As one of its main functions, the CCMC provides to researchers the use of space science models, even if they are not model owners themselves. The second CCMC activity is to support Space Weather forecasting at national Space Weather Forecasting Centers. This second activity involved model evaluations, model transitions to operations, and the development of draft Space Weather forecasting tools. This presentation will focus on the latter element. Specifically, we will discuss the process of transition research models, or information generated by research models, to Space Weather Forecasting organizations. We will analyze successes as well as obstacles to further progress, and we will suggest avenues for increased transitioning success.

Information bias in health research: definition, pitfalls, and adjustment methods

PubMed Central

Althubaiti, Alaa

2016-01-01

As with other fields, medical sciences are subject to different sources of bias. While understanding sources of bias is a key element for drawing valid conclusions, bias in health research continues to be a very sensitive issue that can affect the focus and outcome of investigations. Information bias, otherwise known as misclassification, is one of the most common sources of bias that affects the validity of health research. It originates from the approach that is utilized to obtain or confirm study measurements. This paper seeks to raise awareness of information bias in observational and experimental research study designs as well as to enrich discussions concerning bias problems. Specifying the types of bias can be essential to limit its effects and, the use of adjustment methods might serve to improve clinical evaluation and health care practice. PMID:27217764

Why farming with high tech methods should integrate elements of organic agriculture.

PubMed

Ammann, Klaus

2009-09-01

In the previous article [Ammann, K. (2008) Feature: integrated farming: why organic farmers should use transgenic crops. New Biotechnol. 25, 101-107], in a plea for the introduction of transgenic crops into organic and integrated farming, it was announced that the complementary topic, namely that high tech farmers should integrate elements of organic agriculture, will be a follow up. Some selected arguments for such a view are summarised here. Basically, they comprise a differentiated view on agro-biodiversity outside the field of production; landscape management methods to enhance biodiversity levels. Both elements are compatible with basic ideas of organic farming. First, Precision Farming is given as one example of the many ways to support agricultural production through high technology, with the aim of reducing energy input, maintaining excellent soil conditions and enhancing yield. It is clear from this analysis that modern agriculture and certain elements of organic-integrated agriculture are compatible. There are sectors of high tech farming, such as the introduction of a better recycling scheme and also a better focus on socio-economic aspects, which need to be taken up seriously from organic-integrated farming, a system which puts a lot of emphasis on those elements and for which important research data are available. In the final part a new concept of dynamic sustainability is presented.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Yanwen; Jin, Ke; Xue, Haizhou

We report that historically, alloy development with better radiation performance has been focused on traditional alloys with one or two principal element(s) and minor alloying elements, where enhanced radiation resistance depends on microstructural or nanoscale features to mitigate displacement damage. In sharp contrast to traditional alloys, recent advances of single-phase concentrated solid solution alloys (SP-CSAs) have opened up new frontiers in materials research. In these alloys, a random arrangement of multiple elemental species on a crystalline lattice results in disordered local chemical environments and unique site-to-site lattice distortions. Based on closely integrated computational and experimental studies using a novel setmore » of SP-CSAs in a face-centered cubic structure, we have explicitly demonstrated that increasing chemical disorder can lead to a substantial reduction in electron mean free paths, as well as electrical and thermal conductivity, which results in slower heat dissipation in SP-CSAs. The chemical disorder also has a significant impact on defect evolution under ion irradiation. Considerable improvement in radiation resistance is observed with increasing chemical disorder at electronic and atomic levels. Finally, the insights into defect dynamics may provide a basis for understanding elemental effects on evolution of radiation damage in irradiated materials and may inspire new design principles of radiation-tolerant structural alloys for advanced energy systems.« less

Evolution of Functional Family Therapy as an Evidence-Based Practice for Adolescents with Disruptive Behavior Problems.

PubMed

Robbins, Michael S; Alexander, James F; Turner, Charles W; Hollimon, Amy

2016-09-01

This article summarizes the evolution of functional family therapy (FFT) based upon four decades of clinical practice and scientific scrutiny through research evidence. FFT research has evolved from an initial focus upon clinical process research, which examined sequential exchanges between therapists and family members. A key element of this research has been an examination of the way in which clinicians acquire, consolidate, and maintain the skills needed to implement FFT effectively with youth and families. Many randomized efficacy and effectiveness studies have evaluated the impact of FFT across diverse clinical populations. Subsequent research investigated factors that influence the effectiveness of implementation across more than 300 clinical settings in which more than 2,500 trained clinicians have provided service to nearly 400,000 families. Another important set of investigations concerned the cost-effectiveness of the interventions. © 2016 Family Process Institute.

Research on robotics by principal investigators of the Robotics Technology Development Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrigan, R.W.

The U.S. Department of Energy`s Office of Technology Development has been developing robotics and automation technologies for the clean-up and handling of hazardous and radioactive waste through one of its major elements, Cross Cutting and Advanced Technology development. CC&AT university research and development programs recognize the strong technology, base resident in the university community and sponsor a focused technology research and development program which stresses close interaction between the university sector and the DOE community. This report contains a compilation of research articles by each of 14 principle investigators supported by CC&AT to develop robotics and automation technologies for themore » clean-up and handling of hazardous and radioactive waste. This research has led to innovative solutions for waste clean-up problems, and it has moved technology out of university laboratories into functioning systems which has allowed early evaluation by site technologists.« less

Human Research Program 2010 Chair Standing Review Panel Meeting

NASA Technical Reports Server (NTRS)

Steinberg, Susan

2011-01-01

The 13 Human Research Program (HRP) Standing Review Panel (SRP) Chairs, and in some cases one or two additional panel members (see section XIV, roster) referred to as the Chair (+1) SRP throughout this document, met at the NASA Johnson Space Center (JSC) on December 7, 2010 to allow the HRP Elements and Projects to report on their progress over the past year, their current status, and their plans for the upcoming year based on NASA's current goals and objectives for human space exploration. A large focus of the meeting was also used to discuss integration across the HRP scientific disciplines based on a recommendation from the 2009 HRP SRP review. During the one-day meeting, each of the HRP Elements and Projects presented the changes they made to the HRP Integrated Research Plan (IRP Rev. B) over the last year, and what their top three areas of integration are between other HRP Elements/Projects. The Chair (+1) SRP spent sufficient time addressing the panel charge, either as a group or in a separate closed session, and the Chair (+1) SRP and the HRP presenters and observers, in most cases, had sufficient time to discuss during and after the presentations. The SRP made a final debriefing to the HRP Program Scientist, Dr. John B. Charles, prior to the close of the meeting on December 7, 2010. Overall, the Chair (+1) SRP concluded that most of the HRP Elements/Projects did a commendable job during the past year in addressing integration across the HRP scientific disciplines with the available resources. The Chair (+1) SRP agreed that the idea of integration between HRP Elements/Projects is noble, but believes all parties involved should have the same definition of integration, in order to be successful. The Chair (+1) SRP also believes that a key to successful integration is communication among the HRP Elements/Projects which may present a challenge. The Chair (+1) SRP recommends that the HRP have a workshop on program integration (with HRP Element/Project representatives and maybe outside experts), to interpret the several meanings of integration and how they best can be implemented for the HRP. Another suggestion regarding integration between HRP Elements/Projects is that the HRP convene a meeting of scientists who have a good record of pursuing multidisciplinary/integrative research in the general areas that are relevant to the HRP; identify those that are of high priority; and then support research on those, giving priority to multidisciplinary/integrative teams in which all relevant HRP disciplines are represented. Some of these teams may be already established and functioning within the HRP; others might be organized in response to NASA's research announcements. Lastly, the Chair (+1) SRP felt that there were two overarching issues that spanned across all of the HRP Elements/Projects. The first, which was discussed in great detail, is access to the astronaut medical records, psychological as well as physical. New research will not be useful unless one has access to what has been done, what has worked, and what has not worked. Second is access to records of what medications are being taken by the astronauts while in-flight. The Chair (+1) SRP feels that there needs to be good medical reconciliation to know beginning to end what is happening healthwise to the astronauts.

The Mechanical Response of Multifunctional Battery Systems

NASA Astrophysics Data System (ADS)

Tsutsui, Waterloo

The current state of the art in the field of the mechanical behavior of electric vehicle (EV) battery cells is limited to quasi-static analysis. The lack of published data in the dynamic mechanical behavior of EV battery cells blinds engineers and scientists with the uncertainty of what to expect when EVs experience such unexpected events as intrusions to their battery systems. To this end, the recent occurrences of several EVs catching fire after hitting road debris even make this topic timelier. In order to ensure the safety of EV battery, it is critical to develop quantitative understanding of battery cell mechanical behavior under dynamic compressive loadings. Specifically, the research focuses on the dynamic mechanical loading effect on the standard "18650" cylindrical lithium-ion battery cells. In the study, the force-displacement and voltage-displacement behavior of the battery cells were analyzed experimentally at two strain rates, two state-of-charges, and two unit-cell configurations. The results revealed the strain rate sensitivity of their mechanical responses with the solid sacrificial elements. When the hollow sacrificial cells are used, on the other hand, effect was negligible up to the point of densification strength. Also, the high state-of-charge appeared to increase the stiffness of the battery cells. The research also revealed the effectiveness of the sacrificial elements on the mechanical behavior of a unit cell that consists of one battery cell and six sacrificial elements. The use of the sacrificial elements resulted in the delayed initiation of electric short circuit. Based on the analysis of battery behavior at the cell level, granular battery assembly, a battery pack, was designed and fabricated. The behavior of the granular battery assembly was analyzed both quasistatically and dynamically. Building on the results of the research, various research plans were proposed. Through conducting the research, we sought to answer the following research questions: Could we use battery cells and packs as a part of vehicle structures? Could we use battery cells and packs as a part of vehicle impact energy absorption structure? Based on the research results, the answer to the first question is "yes." However, the granular battery assembly configuration is not suitable as a load-bearing battery structure since the main purpose of granular battery assembly, apart from energy storage for vehicle propulsion, is to work as a kinetic energy dissipation device. The answer to the second question is also "yes." However, the kinetic energy dissipation is mainly performed by the sacrificial elements surrounding the battery cells.

A Review of Brain-Computer Interface Games and an Opinion Survey from Researchers, Developers and Users

PubMed Central

Ahn, Minkyu; Lee, Mijin; Choi, Jinyoung; Jun, Sung Chan

2014-01-01

In recent years, research on Brain-Computer Interface (BCI) technology for healthy users has attracted considerable interest, and BCI games are especially popular. This study reviews the current status of, and describes future directions, in the field of BCI games. To this end, we conducted a literature search and found that BCI control paradigms using electroencephalographic signals (motor imagery, P300, steady state visual evoked potential and passive approach reading mental state) have been the primary focus of research. We also conducted a survey of nearly three hundred participants that included researchers, game developers and users around the world. From this survey, we found that all three groups (researchers, developers and users) agreed on the significant influence and applicability of BCI and BCI games, and they all selected prostheses, rehabilitation and games as the most promising BCI applications. User and developer groups tended to give low priority to passive BCI and the whole head sensor array. Developers gave higher priorities to “the easiness of playing” and the “development platform” as important elements for BCI games and the market. Based on our assessment, we discuss the critical point at which BCI games will be able to progress from their current stage to widespread marketing to consumers. In conclusion, we propose three critical elements important for expansion of the BCI game market: standards, gameplay and appropriate integration. PMID:25116904

A review of brain-computer interface games and an opinion survey from researchers, developers and users.

PubMed

Ahn, Minkyu; Lee, Mijin; Choi, Jinyoung; Jun, Sung Chan

2014-08-11

In recent years, research on Brain-Computer Interface (BCI) technology for healthy users has attracted considerable interest, and BCI games are especially popular. This study reviews the current status of, and describes future directions, in the field of BCI games. To this end, we conducted a literature search and found that BCI control paradigms using electroencephalographic signals (motor imagery, P300, steady state visual evoked potential and passive approach reading mental state) have been the primary focus of research. We also conducted a survey of nearly three hundred participants that included researchers, game developers and users around the world. From this survey, we found that all three groups (researchers, developers and users) agreed on the significant influence and applicability of BCI and BCI games, and they all selected prostheses, rehabilitation and games as the most promising BCI applications. User and developer groups tended to give low priority to passive BCI and the whole head sensor array. Developers gave higher priorities to "the easiness of playing" and the "development platform" as important elements for BCI games and the market. Based on our assessment, we discuss the critical point at which BCI games will be able to progress from their current stage to widespread marketing to consumers. In conclusion, we propose three critical elements important for expansion of the BCI game market: standards, gameplay and appropriate integration.

Synthesis of a fiber-optic magnetostrictive sensor (FOMS) pixel for RF magnetic field imaging

NASA Astrophysics Data System (ADS)

Rengarajan, Suraj

The principal objective of this dissertation was to synthesize a sensor element with properties specifically optimized for integration into arrays capable of imaging RF magnetic fields. The dissertation problem was motivated by applications in nondestructive eddy current testing, smart skins, etc., requiring sensor elements that non-invasively detect millimeter-scale variations over several square meters, in low level magnetic fields varying at frequencies in the 100 kHz-1 GHz range. The poor spatial and temporal resolution of FOMS elements available prior to this dissertation research, precluded their use in non-invasive large area mapping applications. Prior research had been focused on large, discrete devices for detecting extremely low level magnetic fields varying at a few kHz. These devices are incompatible with array integration and imaging applications. The dissertation research sought to overcome the limitations of current technology by utilizing three new approaches; synthesizing magnetostrictive thin films and optimizing their properties for sensor applications, integrating small sensor elements into an array compatible fiber optic interferometer, and devising a RF mixing approach to measure high frequency magnetic fields using the integrated sensor element. Multilayer thin films were used to optimize the magnetic properties of the magnetostrictive elements. Alternating soft (Nisb{80}Fesb{20}) and hard (Cosb{50}Fesb{50}) magnetic alloy layers were selected for the multilayer and the layer thicknesses were varied to obtain films with a combination of large magnetization, high frequency permeability and large magnetostrictivity. X-Ray data and measurement of the variations in the magnetization, resistivity and magnetostriction with layer thicknesses, indicated that an interfacial layer was responsible for enhancing the sensing performance of the multilayers. A FOMS pixel was patterned directly onto the sensing arm of a fiber-optic interferometer, by sputtering a multilayer film with favorable sensor properties. After calibrating the interferometer response with a piezo, the mechanical and magnetic responses of the FOMS element were evaluated for various test fields. High frequency magnetic fields were detected using a local oscillator field to downconvert the RF signal fields to the lower mechanical resonant frequency of the element. A field sensitivity of 0.3 Oe/cm sensor element length was demonstrated at 1 MHz. A coherent magnetization rotation model was developed to predict the magnetostrictive response of the element, and identify approaches for optimizing its performance. This model predicts that an optimized element could resolve ˜1 mm variations in fields varying at frequencies >10 MHz with a sensitivity of ˜10sp{-3} Oe/mm. The results demonstrate the potential utility of integrating this device as a FOMS pixel in RF magnetic field imaging arrays.

Sex workers talk about sex work: six contradictory characteristics of legalised sex work in Melbourne, Australia.

PubMed

Begum, Sufia; Hocking, Jane S; Groves, Jan; Fairley, Christopher K; Keogh, Louise A

2013-01-01

Despite research suggesting that legal sex work is safe and that emotional risks and social stigma are of greater concern than health risks, much research on sex work has focused on health risks. Given the legalisation of sex work in Victoria, Australia, it is timely to look beyond health. Three focus groups were conducted with a total of 14 female sex workers on their experience of legal sex work, both positive and negative, and the social acceptability of their profession. Thematic analysis was used to identify the key ways that sex workers described sex work. Women saw legal sex work as safer than illegal sex work, but still not socially acceptable. However, they also described six contradictory elements of sex work, which was seen as: financially rewarding and entrapping; empowering and demeaning; increasing some opportunities while reducing others; flexible and demanding; offering both intimacy and competition; and leading to a 'double life'. While legalisation has improved the safety of sex work, stigma and discrimination persist.

Evidence, Goals, and Outcomes in Stuttering Treatment: Applications With an Adolescent Who Stutters.

PubMed

Marcotte, Anne K

2018-01-09

The purpose of this clinical focus article is to summarize 1 possible process that a clinician might follow in designing and conducting a treatment program with John, a 14-year-old male individual who stutters. The available research evidence, practitioner experience, and consideration of individual preferences are combined to address goals, treatment procedures, and outcomes for John. The stuttering treatment research literature includes multiple well-designed reviews and individual studies that have shown the effectiveness of prolonged speech (and smooth speech and related variations) for improving stuttered speech and for improving social, emotional, cognitive, and related variables in adolescents who stutter. Based on that evidence, and incorporating the additional elements of practitioner experience and client preferences, this clinical focus article suggests that John would be likely to benefit from a treatment program based on prolonged speech. The basic structure of 1 possible such program is also described, with an emphasis on the goals and outcomes that John could be expected to achieve.

Health effects of carbon-containing particulate matter: focus on sources and recent research program results.

PubMed

Rohr, Annette; McDonald, Jacob

2016-02-01

Air pollution is a complex mixture of gas-, vapor-, and particulate-phase materials comprised of inorganic and organic species. Many of these components have been associated with adverse health effects in epidemiological and toxicological studies, including a broad spectrum of carbonaceous atmospheric components. This paper reviews recent literature on the health impacts of organic aerosols, with a focus on specific sources of organic material; it is not intended to be a comprehensive review of all the available literature. Specific emission sources reviewed include engine emissions, wood/biomass combustion emissions, biogenic emissions and secondary organic aerosol (SOA), resuspended road dust, tire and brake wear, and cooking emissions. In addition, recent findings from large toxicological and epidemiological research programs are reviewed in the context of organic PM, including SPHERES, NPACT, NERC, ACES, and TERESA. A review of the extant literature suggests that there are clear health impacts from emissions containing carbon-containing PM, but difficulty remains in apportioning responses to certain groupings of carbonaceous materials, such as organic and elemental carbon, condensed and gas phases, and primary and secondary material. More focused epidemiological and toxicological studies, including increased characterization of organic materials, would increase understanding of this issue.

An overview: recycling nutrients from crop residues for space applications.

PubMed

Strayer, R F; Atkinson, C F

1997-01-01

Without some form of regenerative life support system, long duration space habitation or travel will be limited severely by the prohibitive costs of resupplying air, water, and food from Earth. Components under consideration for inclusion in a regenerative life support system are based on either physicochemical or biological processes. Physicochemical systems would use filtration and elemental phase changes to convert waste materials into usable products, while biological systems would use higher plants and bioreactors to supply crew needs. Neither a purely biological nor strictly a physicochemical approach can supply all crew needs, thus, the best each approach can offer will be combined into a hybrid regenerative life support system. Researchers at Kennedy Space Center (KSC) Advanced Life Support Breadboard Project have taken the lead on bioregenerative aspects of space life support. The major focus has been on utilization of higher plants for production of food, oxygen, and clean water. However, a key to any regenerative life support system is recycling and recovery of resources (wastes). In keeping with the emphasis at KSC on bioregenerative systems and with the focus on plants, this paper focuses on research with biologically-based options for resource recovery from inedible crop residues.

A study of material composition disclosure practices in green footwear products.

PubMed

Jacques, Jocelise J; Guimarães, Lia B M

2012-01-01

This work is based on the study of pioneering sustainable product development initiatives, and the analysis was guided by the cradle-to-cradle concept, which sees the waste of a given process as raw material for another, just like it happens in nature. Several studies on human factors have focused on factory conditions and workers dealing with product assembly. This research, however, relates more to consumer behavior, product use and end-of-life. The purchase of more environmentally- friendly products, in particular, is heavily influenced by the information made available by the companies. In this scenario, this article discusses three early but notable efforts on green product development, focusing on the disclosure practices adopted by the companies regarding the composition of their products. Research and data collection has focused on the footwear industry, whose products satisfy a basic human need and are ubiquitous worldwide. The use of hazardous materials and chemicals in shoe manufacturing, particularly the use of chromium - a highly toxic element - in addition to toxic solvents and adhesives and non-recyclable synthetic materials can pose serious risks to human health and the environment, even though the consumer usually is not aware of all the relevant characteristics of this kind of product.

An overview: recycling nutrients from crop residues for space applications

NASA Technical Reports Server (NTRS)

Strayer, R. F.; Atkinson, C. F.

1997-01-01

Without some form of regenerative life support system, long duration space habitation or travel will be limited severely by the prohibitive costs of resupplying air, water, and food from Earth. Components under consideration for inclusion in a regenerative life support system are based on either physicochemical or biological processes. Physicochemical systems would use filtration and elemental phase changes to convert waste materials into usable products, while biological systems would use higher plants and bioreactors to supply crew needs. Neither a purely biological nor strictly a physicochemical approach can supply all crew needs, thus, the best each approach can offer will be combined into a hybrid regenerative life support system. Researchers at Kennedy Space Center (KSC) Advanced Life Support Breadboard Project have taken the lead on bioregenerative aspects of space life support. The major focus has been on utilization of higher plants for production of food, oxygen, and clean water. However, a key to any regenerative life support system is recycling and recovery of resources (wastes). In keeping with the emphasis at KSC on bioregenerative systems and with the focus on plants, this paper focuses on research with biologically-based options for resource recovery from inedible crop residues.

Study of Mechanical and Thermal Impact of a Plasma Focus Discharge on Diagnostic Elements of PFM-72M Installation

NASA Astrophysics Data System (ADS)

Bashutin, O. A.; Savelov, A. S.; Sidorov, P. P.

2017-12-01

Mechanical and thermal impact of the plasma focus discharge on structural elements of diagnostic windows of the PFM-72m discharge installation are calculated. The absence of critical impact at early discharge stages and during the first 300 ns after the "plasma focus" formation is shown. The possibility of shock impact on the surface of diagnostic windows at later times, which may result in their substantial deformation and destruction, is demonstrated.

Laying the foundation for Connect to Protect: a multi-site community mobilization intervention to reduce HIV/AIDS incidence and prevalence among urban youth.

PubMed

Ziff, Mauri A; Harper, Gary W; Chutuape, Kate S; Deeds, Bethany Griffin; Futterman, Donna; Francisco, Vincent T; Muenz, Larry R; Ellen, Jonathan M

2006-05-01

Despite the considerable resources that have been dedicated to HIV prevention interventions and services over the past decade, HIV incidence among young people in the United States remains alarmingly high. One reason is that the majority of prevention efforts continue to focus solely on modifying individual behavior, even though public health research strongly suggests that changes to a community's structural elements, such as their programs, practices, and laws or policies, may result in more effective and sustainable outcomes. Connect to Protect is a multi-city community mobilization intervention that focuses on altering or creating community structural elements in ways that will ultimately reduce youth HIV incidence and prevalence. The project, which spans 6 years, is sponsored by the Adolescent Medicine Trials Network for HIV/AIDS Interventions at multiple urban clinical research sites. This paper provides an overview of the study's three phases and describes key factors in setting a firm foundation for the initiation and execution of this type of undertaking. Connect to Protect's community mobilization approach to achieving structural change represents a relatively new and broad direction in HIV prevention research. To optimize opportunities for its success, time and resources must be initially placed into laying the groundwork. This includes activities such as building a strong overarching study infrastructure to ensure protocol tasks can be met across sites; tapping into local site and community expertise and knowledge; forming collaborative relationships between sites and community organizations and members; and fostering community input on and support for changes at a structural level. Failing to take steps such as these may lead to insurmountable implementation problems for an intervention of this kind.

Health promotion and young prisoners: a European perspective.

PubMed

MacDonald, Morag; Rabiee, Fatemeh; Weilandt, Caren

2013-01-01

The purpose of this paper is to assess the health promotion needs of vulnerable young prisoners and the existing health promotion activities in custodial settings in seven European Union (EU) Member States. The research comprised two components: the first involved identifying existing health promotion practices. The second involved mapping out young offenders' health promotion needs by carrying out a needs assessment. Both quantitative and qualitative methods were adopted. The quantitative element comprised surveys among young prisoners and prison staff and focused on the availability and perceived importance of health promotion activities in prison. The qualitative element comprised focus groups with young offenders and individual interviews with prison staff, field experts and NGO members. The findings from the research have identified a number of similar, but also some diverse areas of unmet need for health promotion activities in prison settings across these diverse seven EU countries. There is no consistency of approach within and between countries regarding health promotion policy, guidance, resources and programmes for young prisoners. In order to improve the health of young prisoners and to establish and increase sustainability of existing health promotion programmes, there is a need for the establishment of National and EU standards. Providing health promotion activities for young prisoners while in custodial settings is key to addressing their unmet health and well-being needs and to facilitate their reintegration back into the community. Despite the barriers identified by this research, health promotion is to some extent being delivered in the partner countries and provides a foundation upon which further implementation of health promotion activities can be built especially when the benefits of health promotion activities, like dealing with the common problems of alcohol and drug addiction, mental health and communicable diseases are linked to successful reintegration.

Process improvement methods increase the efficiency, accuracy, and utility of a neurocritical care research repository.

PubMed

O'Connor, Sydney; Ayres, Alison; Cortellini, Lynelle; Rosand, Jonathan; Rosenthal, Eric; Kimberly, W Taylor

2012-08-01

Reliable and efficient data repositories are essential for the advancement of research in Neurocritical care. Various factors, such as the large volume of patients treated within the neuro ICU, their differing length and complexity of hospital stay, and the substantial amount of desired information can complicate the process of data collection. We adapted the tools of process improvement to the data collection and database design of a research repository for a Neuroscience intensive care unit. By the Shewhart-Deming method, we implemented an iterative approach to improve the process of data collection for each element. After an initial design phase, we re-evaluated all data fields that were challenging or time-consuming to collect. We then applied root-cause analysis to optimize the accuracy and ease of collection, and to determine the most efficient manner of collecting the maximal amount of data. During a 6-month period, we iteratively analyzed the process of data collection for various data elements. For example, the pre-admission medications were found to contain numerous inaccuracies after comparison with a gold standard (sensitivity 71% and specificity 94%). Also, our first method of tracking patient admissions and discharges contained higher than expected errors (sensitivity 94% and specificity 93%). In addition to increasing accuracy, we focused on improving efficiency. Through repeated incremental improvements, we reduced the number of subject records that required daily monitoring from 40 to 6 per day, and decreased daily effort from 4.5 to 1.5 h/day. By applying process improvement methods to the design of a Neuroscience ICU data repository, we achieved a threefold improvement in efficiency and increased accuracy. Although individual barriers to data collection will vary from institution to institution, a focus on process improvement is critical to overcoming these barriers.

Rare earth elements in human and animal health: State of art and research priorities.

PubMed

Pagano, Giovanni; Aliberti, Francesco; Guida, Marco; Oral, Rahime; Siciliano, Antonietta; Trifuoggi, Marco; Tommasi, Franca

2015-10-01

A number of applications have been developed using rare earth elements (REE), implying several human exposures and raising unsolved questions as to REE-associated health effects. A MedLine survey was retrieved from early reports (1980s) up to June 2015, focused on human and animal exposures to REE. Literature from animal models was selected focusing on REE-associated health effects. Some REE occupational exposures, in jobs such as glass polishers, photoengravers and movie projectionists showed a few case reports on health effects affecting the respiratory system. No case-control or cohort studies of occupational REE exposures were retrieved. Environmental exposures have been biomonitored in populations residing in REE mining areas, showing REE accumulation. The case for a iatrogenic REE exposure was raised by the use of gadolinium-based contrast agents for nuclear magnetic resonance. Animal toxicity studies have shown REE toxicity, affecting a number of endpoints in liver, lungs and blood. On the other hand, the use of REE as feed additives in livestock is referred as a safe and promising device in zootechnical activities, possibly suggesting a hormetic effect both known for REE and for other xenobiotics. Thus, investigations on long-term exposures and observations are warranted. The state of art provides a limited definition of the health effects in occupationally or environmentally REE-exposed human populations. Research priorities should be addressed to case-control or cohort studies of REE-exposed humans and to life-long animal experiments. Copyright © 2015 Elsevier Inc. All rights reserved.

Microsystem enabled photovoltaic modules and systems

DOEpatents

Nielson, Gregory N; Sweatt, William C; Okandan, Murat

2015-05-12

A microsystem enabled photovoltaic (MEPV) module including: an absorber layer; a fixed optic layer coupled to the absorber layer; a translatable optic layer; a translation stage coupled between the fixed and translatable optic layers; and a motion processor electrically coupled to the translation stage to controls motion of the translatable optic layer relative to the fixed optic layer. The absorber layer includes an array of photovoltaic (PV) elements. The fixed optic layer includes an array of quasi-collimating (QC) micro-optical elements designed and arranged to couple incident radiation from an intermediate image formed by the translatable optic layer into one of the PV elements such that it is quasi-collimated. The translatable optic layer includes an array of focusing micro-optical elements corresponding to the QC micro-optical element array. Each focusing micro-optical element is designed to produce a quasi-telecentric intermediate image from substantially collimated radiation incident within a predetermined field of view.

Child Disaster Mental Health Interventions: Therapy Components

PubMed Central

Pfefferbaum, Betty; Sweeton, Jennifer L.; Nitiéma, Pascal; Noffsinger, Mary A.; Varma, Vandana; Nelson, Summer D.; Newman, Elana

2015-01-01

Children face innumerable challenges following exposure to disasters. To address trauma sequelae, researchers and clinicians have developed a variety of mental health interventions. While the overall effectiveness of multiple interventions has been examined, few studies have focused on the individual components of these interventions. As a preliminary step to advancing intervention development and research, this literature review identifies and describes nine common components that comprise child disaster mental health interventions. This review concluded that future research should clearly define the constituent components included in available interventions. This will require that future studies dismantle interventions to examine the effectiveness of specific components and identify common therapeutic elements. Issues related to populations studied (eg, disaster exposure, demographic and cultural influences) and to intervention delivery (eg, timing and optimal sequencing of components) also warrant attention. PMID:25225954

Current strategies for mobilome research.

PubMed

Jørgensen, Tue S; Kiil, Anne S; Hansen, Martin A; Sørensen, Søren J; Hansen, Lars H

2014-01-01

Mobile genetic elements (MGEs) are pivotal for bacterial evolution and adaptation, allowing shuffling of genes even between distantly related bacterial species. The study of these elements is biologically interesting as the mode of genetic propagation is kaleidoscopic and important, as MGEs are the main vehicles of the increasing bacterial antibiotic resistance that causes thousands of human deaths each year. The study of MGEs has previously focused on plasmids from individual isolates, but the revolution in sequencing technology has allowed the study of mobile genomic elements of entire communities using metagenomic approaches. The problem in using metagenomic sequencing for the study of MGEs is that plasmids and other mobile elements only comprise a small fraction of the total genetic content that are difficult to separate from chromosomal DNA based on sequence alone. The distinction between plasmid and chromosome is important as the mobility and regulation of genes largely depend on their genetic context. Several different approaches have been proposed that specifically enrich plasmid DNA from community samples. Here, we review recent approaches used to study entire plasmid pools from complex environments, and point out possible future developments for and pitfalls of these approaches. Further, we discuss the use of the PacBio long-read sequencing technology for MGE discovery.

Language, music, syntax and the brain.

PubMed

Patel, Aniruddh D

2003-07-01

The comparative study of music and language is drawing an increasing amount of research interest. Like language, music is a human universal involving perceptually discrete elements organized into hierarchically structured sequences. Music and language can thus serve as foils for each other in the study of brain mechanisms underlying complex sound processing, and comparative research can provide novel insights into the functional and neural architecture of both domains. This review focuses on syntax, using recent neuroimaging data and cognitive theory to propose a specific point of convergence between syntactic processing in language and music. This leads to testable predictions, including the prediction that that syntactic comprehension problems in Broca's aphasia are not selective to language but influence music perception as well.

Inter-individual variation in expression: a missing link in biomarker biology?

PubMed

Little, Peter F R; Williams, Rohan B H; Wilkins, Marc R

2009-01-01

The past decade has seen an explosion of variation data demonstrating that diversity of both protein-coding sequences and of regulatory elements of protein-coding genes is common and of functional importance. In this article, we argue that genetic diversity can no longer be ignored in studies of human biology, even research projects without explicit genetic experimental design, and that this knowledge can, and must, inform research. By way of illustration, we focus on the potential role of genetic data in case-control studies to identify and validate cancer protein biomarkers. We argue that a consideration of genetics, in conjunction with proteomic biomarker discovery projects, should improve the proportion of biomarkers that can accurately classify patients.

Ultrashort pulse energy distribution for propulsion in space

NASA Astrophysics Data System (ADS)

Bergstue, Grant Jared

This thesis effort focuses on the development of a novel, space-based ultrashort pulse transmission system for spacecraft. The goals of this research include: (1) ultrashort pulse transmission strategies for maximizing safety and efficiency; (2) optical transmission system requirements; (3) general system requirements including control techniques for stabilization; (4) optical system requirements for achieving effective ablative propulsion at the receiving spacecraft; and (5) ultrashort pulse transmission capabilities required for future missions in space. A key element of the research is the multiplexing device required for aligning the ultrashort pulses from multiple laser sources along a common optical axis for transmission. This strategy enables access to the higher average and peak powers required for useful missions in space.

Science and Technology Review June 2005

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aufderheide, M

2005-05-03

This is the articles in this month's issue: (1) Close Collaborations Advance Progress in Genomic Research--Commentary by Elbert Branscomb; (2) Mining Genomes--Livermore computer programs help locate the stretches of DNA in gene deserts that regulate protein-making genes; (3) Shedding Light on Quantum Physics--Laboratory laser research builds from the foundation of Einstein's description of the quantization of light. (4) The Sharper Image for Surveillance--Speckle imaging-an image-processing technique used in astronomy is bringing long-distance surveillance into sharper focus. (5) Keeping Cool Close to the Sun--The specially coated gamma-ray spectrometer aboard the MESSENGER spacecraft will help scientists determine the abundance of elements inmore » Mercury's crust.« less

The Life Sciences program at the NASA Ames Research Center - An overview

NASA Technical Reports Server (NTRS)

Vernikos-Danellis, Joan; Sharp, Joseph C.

1989-01-01

The research projects planned for the Life Sciences program have a goal of answering basic questions concerning the nature of life itself and its evolution in the universe from basic elements, as well as the search for extraterrestrial intelligence. The program also includes studies of the evolution and development of life on the planet earth, and the global changes occurring today that affect life on the earth. The paper describes the simulation models developed to study the effects of space, the flight projects of the program, and the biomedical program, which currently focuses on the physiological changes in the human body that are associated with space flights and the interactions among these changes.

77 FR 16868 - Quality Verification for Plate-Type Uranium-Aluminum Fuel Elements for Use in Research and Test...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-22

... Fuel Elements for Use in Research and Test Reactors AGENCY: Nuclear Regulatory Commission. ACTION... Plate-Type Uranium-Aluminum Fuel Elements for Use in Research and Test Reactors.'' This guide describes... plate-type uranium-aluminum fuel elements used in research and test reactors (RTRs). DATES: Submit...

Control Activity in Support of NASA Turbine Based Combined Cycle (TBCC) Research

NASA Technical Reports Server (NTRS)

Stueber, Thomas J.; Vrnak, Daniel R.; Le, Dzu K.; Ouzts, Peter J.

2010-01-01

Control research for a Turbine Based Combined Cycle (TBCC) propulsion system is the current focus of the Hypersonic Guidance, Navigation, and Control (GN&C) discipline team. The ongoing work at the NASA Glenn Research Center (GRC) supports the Hypersonic GN&C effort in developing tools to aid the design of control algorithms to manage a TBCC airbreathing propulsion system during a critical operating period. The critical operating period being addressed in this paper is the span when the propulsion system transitions from one cycle to another, referred to as mode transition. One such tool, that is a basic need for control system design activities, is computational models (hereto forth referred to as models) of the propulsion system. The models of interest for designing and testing controllers are Control Development Models (CDMs) and Control Validation Models (CVMs). CDMs and CVMs are needed for each of the following propulsion system elements: inlet, turbine engine, ram/scram dual-mode combustor, and nozzle. This paper presents an overall architecture for a TBCC propulsion system model that includes all of the propulsion system elements. Efforts are under way, focusing on one of the propulsion system elements, to develop CDMs and CVMs for a TBCC propulsion system inlet. The TBCC inlet aerodynamic design being modeled is that of the Combined-Cycle Engine (CCE) Testbed. The CCE Testbed is a large-scale model of an aerodynamic design that was verified in a small-scale screening experiment. The modeling approach includes employing existing state-of-the-art simulation codes, developing new dynamic simulations, and performing system identification experiments on the hardware in the NASA GRC 10 by10-Foot Supersonic Wind Tunnel. The developed CDMs and CVMs will be available for control studies prior to hardware buildup. The system identification experiments on the CCE Testbed will characterize the necessary dynamics to be represented in CDMs for control design. These system identification models will also be the reference models to validate the CDM and CVM models. Validated models will give value to the tools used to develop the models.

Design of near-field irregular diffractive optical elements by use of a multiresolution direct binary search method.

PubMed

Li, Jia-Han; Webb, Kevin J; Burke, Gerald J; White, Daniel A; Thompson, Charles A

2006-05-01

A multiresolution direct binary search iterative procedure is used to design small dielectric irregular diffractive optical elements that have subwavelength features and achieve near-field focusing below the diffraction limit. Designs with a single focus or with two foci, depending on wavelength or polarization, illustrate the possible functionalities available from the large number of degrees of freedom. These examples suggest that the concept of such elements may find applications in near-field lithography, wavelength-division multiplexing, spectral analysis, and polarization beam splitters.

Design of HIFU transducers to generate specific nonlinear ultrasound fields

PubMed Central

Khokhlova, Vera A.; Yuldashev, Petr V.; Rosnitskiy, Pavel B.; Maxwell, Adam D.; Kreider, Wayne; Bailey, Michael R.; Sapozhnikov, Oleg A.

2017-01-01

Various clinical applications of high intensity focused ultrasound (HIFU) have different requirements on the pressure level and degree of nonlinear waveform distortion at the focus. Applications that utilize nonlinear waves with developed shocks are of growing interest, for example, for mechanical disintegration as well as for accelerated thermal ablation of tissue. In this work, an inverse problem of determining transducer parameters to enable formation of shocks with desired amplitude at the focus is solved. The solution was obtained by performing multiple direct simulations of the parabolic Khokhlov–Zabolotskaya–Kuznetsov (KZK) equation for various parameters of the source. It is shown that results obtained within the parabolic approximation can be used to describe the focal region of single element spherical sources as well as complex transducer arrays. It is also demonstrated that the focal pressure level at which fully developed shocks are formed mainly depends on the focusing angle of the source and only slightly depends on its aperture and operating frequency. Using the simulation results, a 256-element HIFU array operating at 1.5 MHz frequency was designed for a specific application of boiling-histotripsy that relies on the presence of 90–100 MPa shocks at the focus. The size of the array elements and focusing angle of the array were chosen to satisfy technical limitations on the intensity at the array elements and desired shock amplitudes in the focal waveform. Focus steering capabilities of the array were analysed using an open-source T-Array software developed at Moscow State University. PMID:28580038

Hydrodynamic metamaterials: Microfabricated arrays to steer, refract, and focus streams of biomaterials

PubMed Central

Morton, Keith J.; Loutherback, Kevin; Inglis, David W.; Tsui, Ophelia K.; Sturm, James C.; Chou, Stephen Y.; Austin, Robert H.

2008-01-01

We show that it is possible to direct particles entrained in a fluid along trajectories much like rays of light in classical optics. A microstructured, asymmetric post array forms the core hydrodynamic element and is used as a building block to construct microfluidic metamaterials and to demonstrate refractive, focusing, and dispersive pathways for flowing beads and cells. The core element is based on the concept of deterministic lateral displacement where particles choose different paths through the asymmetric array based on their size: Particles larger than a critical size are displaced laterally at each row by a post and move along the asymmetric axis at an angle to the flow, while smaller particles move along streamline paths. We create compound elements with complex particle handling modes by tiling this core element using multiple transformation operations; we show that particle trajectories can be bent at an interface between two elements and that particles can be focused into hydrodynamic jets by using a single inlet port. Although particles propagate through these elements in a way that strongly resembles light rays propagating through optical elements, there are unique differences in the paths of our particles as compared with photons. The unusual aspects of these modular, microfluidic metamaterials form a rich design toolkit for mixing, separating, and analyzing cells and functional beads on-chip. PMID:18495920

Reading in healthy ageing: the influence of information structuring in sentences.

PubMed

Price, Jessica M; Sanford, Anthony J

2012-06-01

In three experiments, we investigated the cognitive effects of linguistic prominence to establish whether focus plays a similar or different role in modulating language processing in healthy ageing. Information structuring through the use of cleft sentences is known to increase the processing efficiency of anaphoric references to elements contained with a marked focus structure. It also protects these elements from becoming suppressed in the wake of subsequent information, suggesting selective mechanisms of enhancement and suppression. In Experiment 1 (using self-paced reading), we found that focus enhanced (faster) integration for anaphors referring to words contained within the scope of focus; but suppressed (slower) integration for anaphors to words contained outside of the scope of focus; and in some cases, the effects were larger in older adults. In Experiment 2 (using change detection), we showed that older adults relied more on the linguistic structure to enhance change detection when the changed word was in focus. In Experiment 3 (using delayed probe recognition and eye-tracking), we found that older adults recognized probes more accurately when they were made to elements within the scope of focus than when they were outside the scope of focus. These results indicate that older adults' ability to selectively attend or suppress concepts in a marked focus structure is preserved. PsycINFO Database Record (c) 2012 APA, all rights reserved

Design and testing of an annular array for very-high-frequency imaging

NASA Astrophysics Data System (ADS)

Ketterling, Jeffrey A.; Ramachandran, Sarayu; Lizzi, Frederic L.; Aristizábal, Orlando; Turnbull, Daniel H.

2004-05-01

Very-high-frequency ultrasound (VHFU) transducer technology is currently experiencing a great deal of interest. Traditionally, researchers have used single-element transducers which achieve exceptional lateral image resolution although at a very limited depth of field. A 5-ring focused annular array, a transducer geometry that permits an increased depth of field via electronic focusing, has been constructed. The transducer is fabricated with a PVDF membrane and a copper-clad Kapton film with an annular array pattern. The PVDF is bonded to the Kapton film and pressed into a spherically curved shape. The back side of the transducer is then filled with epoxy. One side of the PVDF is metallized with gold, forming the ground plane of the transducer. The array elements are accessed electrically via copper traces formed on the Kapton film. The annular array consists of 5 equal-area rings with an outer diameter of 1 cm and a radius of curvature of 9 mm. A wire reflector target was used to test the imaging capability of the transducer by acquiring B-scan data for each transmit/receive pair. A synthetic aperture approach was then used to reconstruct the image and demonstrate the enhanced depth of field capabilities of the transducer.

Nurses' Unique Opportunity to Promote Patient Engagement in Prenatal Care.

PubMed

Dyess-Nugent, Phyllis

2018-01-01

To report an analysis of the concept of patient engagement in prenatal care. Engagement in health care has been widely discussed but vaguely defined. Patients benefit more from their health care when they are fully engaged in their care. Patient engagement in prenatal care is an important element of prenatal care utilization that has not been analyzed, standardized as a concept, or measured. Concept analysis. CINAHL, MEDLINE, PsycINFO databases, and the internet were searched for literature published in English with a focus on peer-reviewed journals from disciplines of business, allied health sciences, health administration, psychology, and nursing, focusing on the period of 2010-2015. Hybrid version of the Walker and Avant concept analysis method (2011). This concept analysis provides 4 defining attributes of patient engagement in prenatal care and a table of related empirical referents of engagement. These elements offer a foundation for further nursing scholarship toward measurement and evaluation of patient engagement in prenatal care. Patient engagement in prenatal care represents a human response to a health condition. Efforts to increase patient engagement in health care are best addressed by the nursing profession through continued research and intervention development. © 2017 Wiley Periodicals, Inc.

"If donors woke up tomorrow and said we can't fund you, what would we do?" A health system dynamics analysis of implementation of PMTCT option B+ in Uganda.

PubMed

Doherty, Tanya; Besada, Donnela; Goga, Ameena; Daviaud, Emmanuelle; Rohde, Sarah; Raphaely, Nika

2017-07-26

In October 2012 Uganda extended its prevention of mother to child HIV transmission (PMTCT) policy to Option B+, providing lifelong antiretroviral treatment for HIV positive pregnant and breastfeeding women. The rapid changes and adoptions of new PMTCT policies have not been accompanied by health systems research to explore health system preparedness to implement such programmes. The implementation of Option B+ provides many lessons which can inform the shift to 'Universal Test and Treat', a policy which many sub-Saharan African countries are preparing to adopt, despite fragile health systems. This qualitative study of PMTCT Option B+ implementation in Uganda three years following the policy adoption, uses the health system dynamics framework to explore the impacts of this programme on ten elements of the health system. Qualitative data were gathered through rapid appraisal during in-country field work. Key informant interviews and focus group discussions (FGDs) were undertaken with the Ministry of Health, implementing partners, multilateral agencies, district management teams, facility-based health workers and community cadres. A total of 82 individual interviews and 16 focus group discussions were completed. We conducted a simple manifest analysis, using the ten elements of a health system for grouping data into categories and themes. Of the ten elements in the health system dynamics framework, context and resources (finances, infrastructure & supplies, and human resources) were the most influential in the implementation of Option B+ in Uganda. Support from international actors and implementing partners attempted to strengthen resources at district level, but had unintended consequences of creating dependence and uncertainty regarding sustainability. The health system dynamics framework offers a novel approach to analysis of the effects of implementation of a new policy on critical elements of the health system. Its emphasis on relationships between system elements, population and context is helpful in unpacking impacts of and reactions to pressures on the system, which adds value beyond some previous frameworks.

Outcomes-focused knowledge translation: a framework for knowledge translation and patient outcomes improvement.

PubMed

Doran, Diane M; Sidani, Souraya

2007-01-01

Regularly accessing information that is current and reliable continues to be a challenge for front-line staff nurses. Reconceptualizing how nurses access information and designing appropriate decision support systems to facilitate timely access to information may be important for increasing research utilization. An outcomes-focused knowledge translation framework was developed to guide the continuous improvement of patient care through the uptake of research evidence and feedback data about patient outcomes. The framework operationalizes the three elements of the PARIHS framework at the point of care. Outcomes-focused knowledge translation involves four components: (a) patient outcomes measurement and real-time feedback about outcomes achievement; (b) best-practice guidelines, embedded in decision support tools that deliver key messages in response to patient assessment data; (c) clarification of patients' preferences for care; and (d) facilitation by advanced practice nurses and practice leaders. In this paper the framework is described and evidence is provided to support theorized relationships among the concepts in the framework. The framework guided the design of a knowledge translation intervention aimed at continuous improvement of patient care and evidence-based practice, which are fostered through real-time feedback data about patient outcomes, electronic access to evidence-based resources at the point of care, and facilitation by advanced practice nurses. The propositions in the framework need to be empirically tested through future research.

Electric Motor Thermal Management R&D (Presentation)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennion, K.

2014-11-01

Thermal constraints place significant limitations on how electric motors ultimately perform. Without the ability to remove heat, the motor cannot operate without sacrificing performance, efficiency, and reliability. Finite element analysis and computational fluid dynamics modeling approaches are being increasingly utilized in the design and analysis of electric motors. As the models become more sophisticated, it is important to have detailed and accurate knowledge of both the passive thermal performance and the active cooling performance. In this work, we provide an overview of research characterizing both passive and active thermal elements related to electric motor thermal management. To better characterize themore » passive thermal performance, the effective thermal properties and inter-lamination thermal contact resistances were measured for different stator lamination materials. The active cooling performance of automatic transmission fluid (ATF) jets was also measured to better understand the heat transfer coefficients of ATF impinging on motor copper windings. Ford's Mercon LV was the ATF evaluated in this study. The presentation provides an overview of prior work with a focus on describing future plans for research to be performed during FY15.« less

A summary of recent NASA/Army contributions to rotorcraft vibrations and structural dynamics technology

NASA Technical Reports Server (NTRS)

Kvaternik, Raymond G.; Bartlett, Felton D., Jr.; Cline, John H.

1988-01-01

The requirement for low vibrations has achieved the status of a critical design consideration in modern helicopters. There is now a recognized need to account for vibrations during both the analytical and experimental phases of design. Research activities in this area were both broad and varied and notable advances were made in recent years in the critical elements of the technology base needed to achieve the goal of a jet smooth ride. The purpose is to present an overview of accomplishments and current activities of govern and government-sponsored research in the area of rotorcraft vibrations and structural dynamics, focusing on NASA and Army contributions over the last decade or so. Specific topics addressed include: airframe finite-element modeling for static and dynamic analyses, analysis of coupled rotor-airframe vibrations, optimization of airframes subject to vibration constraints, active and passive control of vibrations in both the rotating and fixed systems, and integration of testing and analysis in such guises as modal analysis, system identification, structural modification, and vibratory loads measurement.

Strengthening the Canadian alcohol advertising regulatory system.

PubMed

Heung, Carly M; Rempel, Benjamin; Krank, Marvin

2012-05-24

Research evidence points to harmful effects from alcohol advertising among children and youth. In particular, exposure to alcohol advertising has been associated with adolescents drinking both earlier and heavier. Although current federal and provincial guidelines have addressed advertising practices to prevent underage drinking, practice has not been supported by existing policy. While protective measures such as social marketing campaigns have the potential for counteracting the effects from alcohol advertising, the effectiveness of such measures can be easily drowned out with increasing advertising activities from the alcohol industry, especially without effective regulation. Research reviewed by the European Focus on Alcohol Safe Environment (FASE) Project has identified a set of key elements that are necessary to make alcohol advertising policy measures effective at protecting children and youth from the harmful effects of alcohol marketing. Using these key elements as an evaluation framework, there are critical components in the Canadian alcohol advertising regulatory system that clearly require strengthening. To protect impressionable children and youth against the harmful effects of alcohol advertising, 13 recommendations to strengthen current alcohol advertising regulations in Canada are provided for Canadian policy-makers, advertising standard agencies, and public health groups.

Understanding care in the past to develop caring science of the future: a historical methodological approach.

PubMed

Nyborg, Vibeke N; Hvalvik, Sigrun; McCormack, Brendan

2018-05-31

In this paper, we explore how the development of historical research methodologies during the last centuries can contribute to more diverse and interdisciplinary research in future caring science, especially towards a care focus that is more person-centred. The adding of a historical approach by professional historians to the theory of person-centredness and person-centred care can develop knowledge that enables a more holistic understanding of the patient and the development of the patient perspective from the past until today. Thus, the aim was to show how developments within historical methodology can help us to understand elements of care in the past to further develop caring science in future. Historical research methodologies have advocated a "history from below" perspective, and this has enabled the evolution of systematic approaches to historical research that can be explored and critically analysed. Linked with this, the development of a more social and cultural oriented understanding of historical research has enabled historians to explore and add knowledge from a broader societal perspective. By focusing on the life of ordinary people and taking social and cultural aspects into account when trying to reconstruct the past, we can get a deeper understanding of health, care and medical development. However, an interdisciplinary research focus on person-centredness and person-centred care that includes professional historians can be challenging. In this paper, we argue that a historical perspective is necessary to meet the challenges we face in future delivery of health care to all people, in all parts of society in an ever more global world. © 2018 Nordic College of Caring Science.

Control of Formation-Flying Multi-Element Space Interferometers with Direct Interferometer-Output Feedback

NASA Technical Reports Server (NTRS)

Lu, Hui-Ling; Cheng, H. L.; Lyon, Richard G.; Carpenter, Kenneth G.

2007-01-01

The long-baseline space interferometer concept involving formation flying of multiple spacecraft holds great promise as future space missions for high-resolution imagery. A major challenge of obtaining high-quality interferometric synthesized images from long-baseline space interferometers is to accurately control these spacecraft and their optics payloads in the specified configuration. Our research focuses on the determination of the optical errors to achieve fine control of long-baseline space interferometers without resorting to additional sensing equipment. We present a suite of estimation tools that can effectively extract from the raw interferometric image relative x/y, piston translational and tip/tilt deviations at the exit pupil aperture. The use of these error estimates in achieving control of the interferometer elements is demonstrated using simulated as well as laboratory-collected interferometric stellar images.

NASA. Lewis Research Center Advanced Modulation and Coding Project: Introduction and overview

NASA Technical Reports Server (NTRS)

Budinger, James M.

1992-01-01

The Advanced Modulation and Coding Project at LeRC is sponsored by the Office of Space Science and Applications, Communications Division, Code EC, at NASA Headquarters and conducted by the Digital Systems Technology Branch of the Space Electronics Division. Advanced Modulation and Coding is one of three focused technology development projects within the branch's overall Processing and Switching Program. The program consists of industry contracts for developing proof-of-concept (POC) and demonstration model hardware, university grants for analyzing advanced techniques, and in-house integration and testing of performance verification and systems evaluation. The Advanced Modulation and Coding Project is broken into five elements: (1) bandwidth- and power-efficient modems; (2) high-speed codecs; (3) digital modems; (4) multichannel demodulators; and (5) very high-data-rate modems. At least one contract and one grant were awarded for each element.

Control of Formation-Flying Multi-Element Space Interferometers with Direct Interferometer-Output Feedback

NASA Technical Reports Server (NTRS)

Lu, Hui-Ling; Cheng, Victor H. L.; Lyon, Richard G.; Carpenter, Kenneth G.

2007-01-01

The long-baseline space interferometer concept involving formation flying of multiple spacecrafts holds great promise as future space missions for high-resolution imagery. A major challenge of obtaining high-quality interferometric synthesized images from long-baseline space interferometers is to accurately control these spacecraft and their optics payloads in the specified configuration. Our research focuses on the determination of the optical errors to achieve fine control of long-baseline space interferometers without resorting to additional sensing equipment. We present a suite of estimation tools that can effectively extract from the raw interferometric image relative x/y, piston translational and tip/tilt deviations at the exit pupil aperture. The use of these error estimates in achieving control of the interferometer elements is demonstrated using simulated as well as laboratory-collected interferometric stellar images.

Effects of selenium biofortification on crop nutritional quality.

PubMed

Malagoli, Mario; Schiavon, Michela; dall'Acqua, Stefano; Pilon-Smits, Elizabeth A H

2015-01-01

Selenium (Se) at very low doses has crucial functions in humans and animals. Since plants represent the main dietary source of this element, Se-containing crops may be used as a means to deliver Se to consumers (biofortification). Several strategies have been exploited to increase plant Se content. Selenium assimilation in plants affects both sulfur (S) and nitrogen (N) metabolic pathways, which is why recent research has also focused on the effect of Se fertilization on the production of S- and N- secondary metabolites with putative health benefits. In this review we discuss the function of Se in plant and human nutrition and the progress in the genetic engineering of Se metabolism to increase the levels and bioavailability of this element in food crops. Particular attention is paid to Se biofortification and the synthesis of compounds with beneficial effects on health.

Mass spectrometry for identification of proteins that specifically bind to a distal enhancer of the Oct4 gene

NASA Astrophysics Data System (ADS)

Bakhmet, E. I.; Nazarov, I. B.; Artamonova, T. O.; Khodorkovsky, M. A.; Tomilin, A. N.

2017-11-01

Transcription factor Oct4 is a marker of pluripotent stem cells and has a significant role in their self-renewal. Oct4 gene is controlled by three cis-regulatory elements - proximal promoter, proximal enhancer and distal enhancer. All of these elements are targets for binding of regulatory proteins. Distal enhancer is in our research focus because of its activity in early stages of embryonic development. There are two main sequences called site 2A and site 2B that are presented in distal enhancer. For this moment proteins which bind to a site 2A (CCCCTCCCCCC) remain unknown. Using combination of in vitro method electrophoretic mobility shift assay (EMSA) and mass spectromery we identified several candidates that can regulate Oct4 gene expression through site 2A.

Nail Damage (Severe Onychodystrophy) Induced by Acrylate Glue: Scanning Electron Microscopy and Energy Dispersive X-Ray Investigations

PubMed Central

Pinteala, Tudor; Chiriac, Anca Eduard; Rosca, Irina; Larese Filon, Francesca; Pinteala, Mariana; Chiriac, Anca; Podoleanu, Cristian; Stolnicu, Simona; Coros, Marius Florin; Coroaba, Adina

2017-01-01

Background Scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) techniques have been used in various fields of medical research, including different pathologies of the nails; however, no studies have focused on obtaining high-resolution microscopic images and elemental analysis of disorders caused by synthetic nails and acrylic adhesives. Methods Damaged/injured fingernails caused by the use of acrylate glue and synthetic nails were investigated using SEM and EDX methods. Results SEM and EDX proved that synthetic nails, acrylic glue, and nails damaged by contact with acrylate glue have a different morphology and different composition compared to healthy human nails. Conclusions SEM and EDX analysis can give useful information about the aspects of topography (surface sample), morphology (shape and size), hardness or reflectivity, and the elemental composition of nails. PMID:28232921

Brief, embedded, spontaneous metacognitive talk indicates thinking like a physicist

NASA Astrophysics Data System (ADS)

Sayre, Eleanor C.; Irving, Paul W.

2015-12-01

[This paper is part of the Focused Collection on Upper Division Physics Courses.] Instructors and researchers think "thinking like a physicist" is important for students' professional development. However, precise definitions and observational markers remain elusive. We reinterpret popular beliefs inventories in physics to indicate what physicists think thinking like a physicist entails. Through discourse analysis of upper-division students' speech in natural settings, we show that students may appropriate or resist these elements. We identify a new element in the physicist speech genre: brief, embedded, spontaneous metacognitive talk (BESM talk). BESM talk communicates students' in-the-moment enacted expectations about physics as a technical field and a cultural endeavor. Students use BESM talk to position themselves as physicists or nonphysicists. Students also use BESM talk to communicate their expectations in four ways: understanding, confusion, spotting inconsistencies, and generalized expectations.

Implementing general quantum measurements on linear optical and solid-state qubits

NASA Astrophysics Data System (ADS)

Ota, Yukihiro; Ashhab, Sahel; Nori, Franco

2013-03-01

We show a systematic construction for implementing general measurements on a single qubit, including both strong (or projection) and weak measurements. We mainly focus on linear optical qubits. The present approach is composed of simple and feasible elements, i.e., beam splitters, wave plates, and polarizing beam splitters. We show how the parameters characterizing the measurement operators are controlled by the linear optical elements. We also propose a method for the implementation of general measurements in solid-state qubits. Furthermore, we show an interesting application of the general measurements, i.e., entanglement amplification. YO is partially supported by the SPDR Program, RIKEN. SA and FN acknowledge ARO, NSF grant No. 0726909, JSPS-RFBR contract No. 12-02-92100, Grant-in-Aid for Scientific Research (S), MEXT Kakenhi on Quantum Cybernetics, and the JSPS via its FIRST program.

Exploration of Advanced Probabilistic and Stochastic Design Methods

NASA Technical Reports Server (NTRS)

Mavris, Dimitri N.

2003-01-01

The primary objective of the three year research effort was to explore advanced, non-deterministic aerospace system design methods that may have relevance to designers and analysts. The research pursued emerging areas in design methodology and leverage current fundamental research in the area of design decision-making, probabilistic modeling, and optimization. The specific focus of the three year investigation was oriented toward methods to identify and analyze emerging aircraft technologies in a consistent and complete manner, and to explore means to make optimal decisions based on this knowledge in a probabilistic environment. The research efforts were classified into two main areas. First, Task A of the grant has had the objective of conducting research into the relative merits of possible approaches that account for both multiple criteria and uncertainty in design decision-making. In particular, in the final year of research, the focus was on the comparison and contrasting between three methods researched. Specifically, these three are the Joint Probabilistic Decision-Making (JPDM) technique, Physical Programming, and Dempster-Shafer (D-S) theory. The next element of the research, as contained in Task B, was focused upon exploration of the Technology Identification, Evaluation, and Selection (TIES) methodology developed at ASDL, especially with regards to identification of research needs in the baseline method through implementation exercises. The end result of Task B was the documentation of the evolution of the method with time and a technology transfer to the sponsor regarding the method, such that an initial capability for execution could be obtained by the sponsor. Specifically, the results of year 3 efforts were the creation of a detailed tutorial for implementing the TIES method. Within the tutorial package, templates and detailed examples were created for learning and understanding the details of each step. For both research tasks, sample files and tutorials are attached in electronic form with the enclosed CD.

MONTANA PALLADIUM RESEARCH INITIATIVE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, John; McCloskey, Jay; Douglas, Trevor

2012-05-09

Project Objective: The overarching objective of the Montana Palladium Research Initiative is to perform scientific research on the properties and uses of palladium in the context of the U.S. Department of Energy's Hydrogen, Fuel Cells and Infrastructure Technologies Program. The purpose of the research will be to explore possible palladium as an alternative to platinum in hydrogen-economy applications. To achieve this objective, the Initiatives activities will focus on several cutting-edge research approaches across a range of disciplines, including metallurgy, biomimetics, instrumentation development, and systems analysis. Background: Platinum-group elements (PGEs) play significant roles in processing hydrogen, an element that shows highmore » potential to address this need in the U.S. and the world for inexpensive, reliable, clean energy. Platinum, however, is a very expensive component of current and planned systems, so less-expensive alternatives that have similar physical properties are being sought. To this end, several tasks have been defined under the rubric of the Montana Palladium Research Iniative. This broad swath of activities will allow progress on several fronts. The membrane-related activities of Task 1 employs state-of-the-art and leading-edge technologies to develop new, ceramic-substrate metallic membranes for the production of high-purity hydrogen, and develop techniques for the production of thin, defect-free platinum group element catalytic membranes for energy production and pollution control. The biomimetic work in Task 2 explores the use of substrate-attached hydrogen-producing enzymes and the encapsulation of palladium in virion-based protein coats to determine their utility for distributed hydrogen production. Task 3 work involves developing laser-induced breakdown spectroscopy (LIBS) as a real-time, in situ diagnostic technique to characterize PGEs nanoparticles for process monitoring and control. The systems engineering work in task 4 will determine how fuel cells taken as systems behave over periods of time that should show how their reformers and other subsystems deteriorate with time.« less

Comparing geological and statistical approaches for element selection in sediment tracing research

NASA Astrophysics Data System (ADS)

Laceby, J. Patrick; McMahon, Joe; Evrard, Olivier; Olley, Jon

2015-04-01

Elevated suspended sediment loads reduce reservoir capacity and significantly increase the cost of operating water treatment infrastructure, making the management of sediment supply to reservoirs of increasingly importance. Sediment fingerprinting techniques can be used to determine the relative contributions of different sources of sediment accumulating in reservoirs. The objective of this research is to compare geological and statistical approaches to element selection for sediment fingerprinting modelling. Time-integrated samplers (n=45) were used to obtain source samples from four major subcatchments flowing into the Baroon Pocket Dam in South East Queensland, Australia. The geochemistry of potential sources were compared to the geochemistry of sediment cores (n=12) sampled in the reservoir. The geochemical approach selected elements for modelling that provided expected, observed and statistical discrimination between sediment sources. Two statistical approaches selected elements for modelling with the Kruskal-Wallis H-test and Discriminatory Function Analysis (DFA). In particular, two different significance levels (0.05 & 0.35) for the DFA were included to investigate the importance of element selection on modelling results. A distribution model determined the relative contributions of different sources to sediment sampled in the Baroon Pocket Dam. Elemental discrimination was expected between one subcatchment (Obi Obi Creek) and the remaining subcatchments (Lexys, Falls and Bridge Creek). Six major elements were expected to provide discrimination. Of these six, only Fe2O3 and SiO2 provided expected, observed and statistical discrimination. Modelling results with this geological approach indicated 36% (+/- 9%) of sediment sampled in the reservoir cores were from mafic-derived sources and 64% (+/- 9%) were from felsic-derived sources. The geological and the first statistical approach (DFA0.05) differed by only 1% (σ 5%) for 5 out of 6 model groupings with only the Lexys Creek modelling results differing significantly (35%). The statistical model with expanded elemental selection (DFA0.35) differed from the geological model by an average of 30% for all 6 models. Elemental selection for sediment fingerprinting therefore has the potential to impact modeling results. Accordingly is important to incorporate both robust geological and statistical approaches when selecting elements for sediment fingerprinting. For the Baroon Pocket Dam, management should focus on reducing the supply of sediments derived from felsic sources in each of the subcatchments.

Attractive Flicker--Guiding Attention in Dynamic Narrative Visualizations.

PubMed

Waldner, Manuela; Le Muzic, Mathieu; Bernhard, Matthias; Purgathofer, Werner; Viola, Ivan

2014-12-01

Focus+context techniques provide visual guidance in visualizations by giving strong visual prominence to elements of interest while the context is suppressed. However, finding a visual feature to enhance for the focus to pop out from its context in a large dynamic scene, while leading to minimal visual deformation and subjective disturbance, is challenging. This paper proposes Attractive Flicker, a novel technique for visual guidance in dynamic narrative visualizations. We first show that flicker is a strong visual attractor in the entire visual field, without distorting, suppressing, or adding any scene elements. The novel aspect of our Attractive Flicker technique is that it consists of two signal stages: The first "orientation stage" is a short but intensive flicker stimulus to attract the attention to elements of interest. Subsequently, the intensive flicker is reduced to a minimally disturbing luminance oscillation ("engagement stage") as visual support to keep track of the focus elements. To find a good trade-off between attraction effectiveness and subjective annoyance caused by flicker, we conducted two perceptual studies to find suitable signal parameters. We showcase Attractive Flicker with the parameters obtained from the perceptual statistics in a study of molecular interactions. With Attractive Flicker, users were able to easily follow the narrative of the visualization on a large display, while the flickering of focus elements was not disturbing when observing the context.