Comparative morphology of the postpharyngeal gland in the Philanthinae (Hymenoptera, Crabronidae) and the evolution of an antimicrobial brood protection mechanism.

PubMed

Weiss, Katharina; Strohm, Erhard; Kaltenpoth, Martin; Herzner, Gudrun

2015-12-21

Hymenoptera that mass-provision their offspring have evolved elaborate antimicrobial strategies to ward off fungal infestation of the highly nutritive larval food. Females of the Afro-European Philanthus triangulum and the South American Trachypus elongatus (Crabronidae, Philanthinae) embalm their prey, paralyzed bees, with a secretion from a complex postpharyngeal gland (PPG). This coating consists of mainly unsaturated hydrocarbons and reduces water accumulation on the prey's surface, thus rendering it unfavorable for fungal growth. Here we (1) investigated whether a North American Philanthus species also employs prey embalming and (2) assessed the occurrence and morphology of a PPG among females of the subfamily Philanthinae in order to elucidate the evolution of prey embalming as an antimicrobial strategy. We provide clear evidence that females of the North American Philanthus gibbosus possess large PPGs and embalm their prey. The comparative analyses of 26 species from six genera of the Philanthinae, using histological methods and 3D-reconstructions, revealed pronounced differences in gland morphology within the subfamily. A formal statistical analysis based on defined characters of the glands confirmed that while all members of the derived tribe Philanthini have large and complex PPGs, species of the two more basal tribes, Cercerini and Aphilanthopsini, possess simple and comparatively small glands. According to an ancestral state reconstruction, the complex PPG most likely evolved in the last common ancestor of the Philanthini, thus representing an autapomorphy of this tribe. Prey embalming, as described for P. triangulum and T. elongatus, and now also for P. gibbosus, most probably requires a complex PPG. Hence, the morphology and size of the PPG may allow for inferences about the origin and distribution of the prey embalming behavior within the Philanthinae. Based on our results, we suggest that prey embalming has evolved as an antimicrobial strategy in and is restricted to the tribe Philanthini, which seems to face exceptional threats with regard to fungal infestations of their larval provisions.

A comparison of embalming fluids for use in surgical workshops.

PubMed

Jaung, Rebekah; Cook, Peter; Blyth, Phil

2011-03-01

There is a growing need to learn surgical skills without risk to patients. One of the major determining factors on the suitability of specimens for surgical workshops is the fluid used for embalming. This study sought to compare three different arterial embalming preparations to a single fresh cadaver. Eleven cadavers embalmed using Graz (single cadaver), Dodge (four cadavers) and Genelyn (five cadavers) preparations were compared using four criteria; joint flexibility measured with a goniometer, tissue pliability rated on standardized videos of instrument handling, tissue color analyzed on standardized photographs and resistance to fungal growth identified by inoculation and observation of tissue blocks. The cadaver embalmed according to the Graz method had joint flexibility comparable to fresh tissue while the Dodge and Genelyn cadavers were less flexible. Tissue pliability was significantly affected by the Dodge and Genelyn methods while the Graz method tissue remained most like fresh tissue. The Graz method cadaver had color that was most akin to fresh tissue and the Dodge method cadavers were relatively more like fresh than the Genelyn. The Dodge and Genelyn method had quite similar fungicidal properties (3/11 Dodge and 2/9 Genelyn embalmed cadavers susceptible) while the Graz method cadaver did not grow mould. Variation exists between cadavers; however, the Graz method produced a cadaver with more flexible joints, better tissue quality and muscle color closest to the fresh specimen. The Dodge and Genelyn methods are similar with the exception of tissue color where the Dodge method was more similar to fresh tissue. Copyright © 2011 Wiley-Liss, Inc.

Validation of alternate light sources for detection of bruises in non-embalmed and embalmed cadavers.

PubMed

Olds, Kelly; Byard, Roger W; Winskog, Calle; Langlois, Neil E I

2017-03-01

Bruising is frequently documented in cases of violence for use as forensic evidence. However, bruises can be overlooked if they are not visible to the naked eye. Alternate light sources such as ultraviolet, narrow band, and infrared have been used in an attempt to reveal the presence of bruising that is not otherwise apparent. However, there is a significant gap in knowledge surrounding this technique as it has not been validated against histology to confirm that bruising is genuinely being enhanced. A recent study evaluated the ability of alternate light sources to enhance visibility of bruises using a pigskin model. However, histological confirmation of bruising in humans using these light sources has not yet been performed. In this study, embalmed and non-embalmed human cadavers were used. Bodies were surveyed with alternate light sources, and enhanced regions that were unapparent under white light were photographed with the alternate light sources and sampled for histological assessment. Immunohistochemical staining for the red blood cell surface protein glycophorin was used determine if the enhanced area was a bruise (defined by the presence of extravasated erythrocytes). Photographs of areas confirmed to be bruises were analyzed using the program Fiji to measure enhancement, which was defined as an increase in the measured transverse diameter. In the non-embalmed and the embalmed cadavers violet alternate light produced the greatest enhancement of histologically confirmed bruises, followed by blue (both p < 0.0001). Regions that were not confirmed as bruises also enhanced, indicating that light sources may not be specific. This suggests that the use of light sources to enhance the visibility of bruising should be undertaken with caution and further studies are required.

A pilot study comparing the use of Thiel- and formalin-embalmed cadavers in the teaching of human anatomy.

PubMed

Balta, Joy Y; Lamb, Clare; Soames, Roger W

2015-01-01

Formalin had traditionally been used to preserve human material to teach gross anatomy. In 2008 the Centre for Anatomy and Human Identification (CAHID) at the University of Dundee embarked on the use of the Thiel method of embalming. The aim of this pilot study was to assess the difference between formalin-embalmed cadavers (FEC) and Thiel-embalmed cadavers (TEC) used for teaching and surgical training. Three different questionnaires were prepared for data collection from undergraduate and postgraduate students and clinical staff. All undergraduate and postgraduate students as well as clinical staff commented on the appearance of the TEC. There was no overall consensus concerning the use of TEC, some respondents preferred TEC for the entire dissection, some only for certain areas such as the musculoskeletal system. On a technical level TEC were considered less hazardous then FEC by one-third of participants with fewer than 10% regarding TEC as more irritating than FEC. Psychologically, 32.7% of undergraduate students expressed the view that TEC made them feel more uncomfortable compared with FEC because of their life-like appearance. However, 57.1% of undergraduate students encountered the same uncomfortable feelings when viewing both TEC and FEC. The use of Thiel-embalmed cadavers to teach anatomy has an added value, though further research is required over longer periods of time to identify its best usage. © 2014 American Association of Anatomists.

The Histopathologic Reliability of Tissue Taken from Cadavers within the Gross Anatomy Laboratory

ERIC Educational Resources Information Center

Rae, Guenevere; Newman, William P., III; McGoey, Robin; Donthamsetty, Supriya; Karpinski, Aryn C.; Green, Jeffrey

2018-01-01

The purpose of this study was to examine the histopathologic reliability of embalmed cadaveric tissue taken from the gross anatomy laboratory. Tissue samples from hearts, livers, lungs, and kidneys were collected after the medical students' dissection course was completed. All of the cadavers were embalmed in a formalin-based fixative solution.…

Combined maceration procedure permits advanced microsurgical dissection of Thiel-embalmed specimens.

PubMed

Bangerter, Hannes; Boemke, Susanne; Röthlisberger, Raphael; Schwartz, Valerie; Bergmann, Mathias; Müller, Michael D; Djonov, Valentin

2017-03-01

Due to the realistic colour, texture conservation and preservation of biomechanical properties, Thiel-embalming is becoming the main embalming procedure for clinical courses and research based on human cadaver material. The aim of this study is to establish a new procedure that allows advanced microdissection of small vessels and intraorganic nerves in Thiel-embalmed material. After a classical gross anatomical dissection, human hemipelves underwent repetitive application of 3 consecutive steps: (i) maceration with alloy of nitric acid and MiliQ water 1:10 for 24-48h. (ii) Immersion: the hemipelves were rinsed under tap water for 20-30min. and placed in a water bath for 1h. The nerves become more prominent due to the swelling and increased water content. (iii) microdissection under surgical microscope. To facilitate the organ visualization perfusion with polyurethane (Pu4ii, VasQtec ® , Switzerland) in red/blue for arteries/veins respectively has been performed. By using the proposed procedure, we performed satisfactory microdissection on Thiel-embalmed samples. The combination with polyurethane vascular casting permits visualization of small arterioles and venules in a range of 20-25μm. The method is very suitable for demonstration of somatic and vegetative nerves. Branches of the sacral plexuses and autonomic nerves from the superior and inferior hypogastric plexus have been tracked up to the smallest intraorganic branches in a range of 12.5-15μm. In conclusion, the established combined procedure offers a new possibility for advanced microdissection, which will allow acquisition of clinically relevant information about organ specific micro- vascularization and innervation. Copyright © 2016 Elsevier GmbH. All rights reserved.

The Use of Fry (Embalming Fluid and PCP-Laced Cigarettes or Marijuana Sticks) among Crack Cocaine Smokers

ERIC Educational Resources Information Center

Peters, Ronald J.; Williams, Mark; Ross, Michael W.; Atkinson, John; McCurdy, Sherly A.

2009-01-01

Statistics show that the prevalence of crack cocaine use and embalming fluid and phencyclidine (PCP)-laced cigarettes or marijuana sticks, commonly referred to on the street as "fry" or "wet" is a problem; however, the relationship between these substances of abuse and concurrent polydrug use is unknown. In the present study, a…

Imaging in anatomy: a comparison of imaging techniques in embalmed human cadavers

PubMed Central

2013-01-01

Background A large variety of imaging techniques is an integral part of modern medicine. Introducing radiological imaging techniques into the dissection course serves as a basis for improved learning of anatomy and multidisciplinary learning in pre-clinical medical education. Methods Four different imaging techniques (ultrasound, radiography, computed tomography, and magnetic resonance imaging) were performed in embalmed human body donors to analyse possibilities and limitations of the respective techniques in this peculiar setting. Results The quality of ultrasound and radiography images was poor, images of computed tomography and magnetic resonance imaging were of good quality. Conclusion Computed tomography and magnetic resonance imaging have a superior image quality in comparison to ultrasound and radiography and offer suitable methods for imaging embalmed human cadavers as a valuable addition to the dissection course. PMID:24156510

Army Helicopter Crashworthiness

DTIC Science & Technology

1983-10-01

protect the structure surrounding the occupied Cabin volume. Components. An important part of this program was to evaluate analysis methods that could...rigid (nonstroking) seats and the production BLACK HAWK helicopter crashworthy crewseat. Tests of three embalmed cadavers in the rigid seat gave mixed...CONDITIONS FOR RIGID SEAT TESTS WITH EMBALMED CADAVERS 1 CADAVER WEIGHT PEAK TEST NO. NO. AGE HEIGHT (LB) SEX ACCEL. (G) FRACTURE CONDITION SERIES #1

A human cadaver fascial compartment pressure measurement model.

PubMed

Messina, Frank C; Cooper, Dylan; Huffman, Gretchen; Bartkus, Edward; Wilbur, Lee

2013-10-01

Fresh human cadavers provide an effective model for procedural training. Currently, there are no realistic models to teach fascial compartment pressure measurement. We created a human cadaver fascial compartment pressure measurement model and studied its feasibility with a pre-post design. Three faculty members, following instructions from a common procedure textbook, used a standard handheld intra-compartment pressure monitor (Stryker(®), Kalamazoo, MI) to measure baseline pressures ("unembalmed") in the anterior, lateral, deep posterior, and superficial posterior compartments of the lower legs of a fresh human cadaver. The right femoral artery was then identified by superficial dissection, cannulated distally towards the lower leg, and connected to a standard embalming machine. After a 5-min infusion, the same three faculty members re-measured pressures ("embalmed") of the same compartments on the cannulated right leg. Unembalmed and embalmed readings for each compartment, and baseline readings for each leg, were compared using a two-sided paired t-test. The mean baseline compartment pressures did not differ between the right and left legs. Using the embalming machine, compartment pressure readings increased significantly over baseline for three of four fascial compartments; all in mm Hg (±SD): anterior from 40 (±9) to 143 (±44) (p = 0.08); lateral from 22 (±2.5) to 160 (±4.3) (p < 0.01); deep posterior from 34 (±7.9) to 161 (±15) (p < 0.01); superficial posterior from 33 (±0) to 140 (±13) (p < 0.01). We created a novel and measurable fascial compartment pressure measurement model in a fresh human cadaver using a standard embalming machine. Set-up is minimal and the model can be incorporated into teaching curricula. Copyright © 2013 Elsevier Inc. All rights reserved.

Enhanced Preliminary Assessment Report: Kapalama Military Reservation, Honolulu, Hawaii

DTIC Science & Technology

1990-02-01

Environmentally Significant Operations - Transformers 3-4 5-1 Recommended Sampling Methods 5-6 vii 1073M2-4 LIST OF TABLES Tabf lN. Title ES-1 ESOs...Phase III. ES-I 1073M2-4 ESOs identified on the property include: Buildings 913/914 - Mortuary - chemicals used in the embalming process. The chemicals...The chemicals stored here are associated with the examination and embalming procedures performed at the mortuary and include arterial fluids

Nitrite pickling salt as an alternative to formaldehyde for embalming in veterinary anatomy--A study based on histo- and microbiological analyses.

PubMed

Janczyk, Pawel; Weigner, Janet; Luebke-Becker, Antina; Kaessmeyer, Sabine; Plendl, Johanna

2011-02-20

Formaldehyde, the traditional embalming agent has negative health effects. Nitrite pickling salt has been reported to be a good and inexpensive alternative when supplemented with antioxidants, but the antioxidants caused yellowish colouration of cadavers, and damaged corrosion-resistant steel tables and stone floors. Here, nitrite pickling salt was supplemented with ethanol and Pluriol(®) and tested for effectiveness as an embalming agent of twenty dog cadavers: 10 with open, and 10 with closed abdominal cavity. The texture of the tissue was monitored intermittently for 12 months throughout the course of an anatomical dissection class. Histological and microbiological analysis of samples from muscles, lungs, duodenum and colon were performed. Dogs with an open abdomen remained suitable for dissection purposes during the entire course. The abdominal organs of the closed cadavers lost their natural features, without histological signs of autolysis. Enterococcus spp., Staphylococcus spp., Micrococcus spp., Bacillus spp. and Clostridium perfringens were recorded after 24 weeks. The open cadavers underwent additional maintenance via renewed treatment with ethanol and Pluriol(®) after each dissection. After 30 weeks, C. perfringens was massively reduced in the colon of the open cadavers. The tested solution successfully embalms open bodies, carries no health risks and is environmentally friendly and cost effective. Copyright © 2010 Elsevier GmbH. All rights reserved.

Morphology, Chemistry and Function of the Postpharyngeal Gland in the South American Digger Wasps Trachypus boharti and Trachypus elongatus

PubMed Central

Herzner, Gudrun; Kaltenpoth, Martin; Poettinger, Theodor; Weiss, Katharina; Koedam, Dirk; Kroiss, Johannes; Strohm, Erhard

2013-01-01

Microbes pose severe threats to animals as competitors or pathogens and strongly affect the evolution of life history traits like parental care. Females of the European beewolf Philanthus triangulum, a solitary digger wasp, provision their offspring with paralyzed honeybees and embalm them with the secretion from large postpharyngeal glands (PPG) that contain mainly unsaturated hydrocarbons. This coating changes the physico-chemical properties of the prey surface, causes a reduction of water condensation and retards growth of mold fungi. Here we examined the closely related South American genus Trachypus, which shows a life-history similar to Philanthus. We investigated whether Trachypus spp. also possess PPGs and embalm larval provisions. Using histological methods and 3D reconstructions we show that Trachypus boharti and T. elongatus possess PPGs that are similar to P. triangulum but somewhat smaller. The ultrastructure of the gland epithelium suggests that the gland content is at least partly sequestered from the hemolymph. Chemical analyses using gas chromatography / mass spectrometry revealed that both the cuticle and PPGs of Trachypus contain mainly unsaturated long-chain hydrocarbons. The gland of T. boharti additionally contains long-chain ketones. The hydrocarbons from the PPG of T. elongatus occurred on prey bees excavated from nests in the field but not on conspecific control bees. While the embalming only slightly elevated the amount of hydrocarbons on prey bees, the proportion of unsaturated hydrocarbons, which is crucial for the antifungal effect, was significantly increased. The Trachypus species under study possess PPGs that are very similar to the PPG of P. triangulum with regard to morphology, ultrastructure and chemistry. Moreover, we provide clear evidence that T. elongatus females embalm their prey, presumably as a means of prey preservation. The observed differences among Trachypus and Philanthus in gland size and prey embalming may have evolved in response to divergent ecological conditions. PMID:24324830

Formaldehyde Exposures in a University Anatomy Laboratory

NASA Astrophysics Data System (ADS)

Winkler, Kyle William

Air sampling studies were conducted within a university anatomical laboratory during the embalmment of a cadaver in order to determine if dangerous concentrations of formaldehyde existed. Three air sampling studies were conducted in the anatomical laboratory on three separate days that a cadaver was being embalmed. Samples were collected and analyzed using the Occupational Safety and Health Administration (OSHA) Sampling and Analytical Methods: Method 52. Each air sampling study sampled for short term exposure limit (STEL) and time weighted mean (TWA) breathing zone formaldehyde concentrations as well as area TWA formaldehyde concentrations. A personal aldehyde monitor was also used in each air sampling study to sample for breathing zone formaldehyde concentrations. Measured TWA mean exposures to formaldehyde ranged from 0.15--1.3 parts per million (ppm), STEL formaldehyde exposures ranged from 0.019--0.64 ppm, and eight-hour TWAs ranged from 0.03 to 3.6 ppm. All 8-hour TWA formaldehyde concentrations sampled in the anatomy laboratory during an embalmment were less than the permissible exposure limit (PEL) required by OSHA.

Human Thiel-Embalmed Cadaveric Aortic Model with Perfusion for Endovascular Intervention Training and Medical Device Evaluation.

PubMed

McLeod, Helen; Cox, Ben F; Robertson, James; Duncan, Robyn; Matthew, Shona; Bhat, Raj; Barclay, Avril; Anwar, J; Wilkinson, Tracey; Melzer, Andreas; Houston, J Graeme

2017-09-01

The purpose of this investigation was to evaluate human Thiel-embalmed cadavers with the addition of extracorporeal driven ante-grade pulsatile flow in the aorta as a model for simulation training in interventional techniques and endovascular device testing. Three human cadavers embalmed according to the method of Thiel were selected. Extracorporeal pulsatile ante-grade flow of 2.5 L per min was delivered directly into the aorta of the cadavers via a surgically placed connection. During perfusion, aortic pressure and temperature were recorded and optimized for physiologically similar parameters. Pre- and post-procedure CT imaging was conducted to plan and follow up thoracic and abdominal endovascular aortic repair as it would be in a clinical scenario. Thoracic endovascular aortic repair (TEVAR) and endovascular abdominal repair (EVAR) procedures were conducted in simulation of a clinical case, under fluoroscopic guidance with a multidisciplinary team present. The Thiel cadaveric aortic perfusion model provided pulsatile ante-grade flow, with pressure and temperature, sufficient to conduct a realistic simulation of TEVAR and EVAR procedures. Fluoroscopic imaging provided guidance during the intervention. Pre- and post-procedure CT imaging facilitated planning and follow-up evaluation of the procedure. The human Thiel-embalmed cadavers with the addition of extracorporeal flow within the aorta offer an anatomically appropriate, physiologically similar robust model to simulate aortic endovascular procedures, with potential applications in interventional radiology training and medical device testing as a pre-clinical model.

A case of flying insects visiting an anatomy and embalming laboratory in Medellín, Colombia.

PubMed

Amat, Eduardo; Serna-Giraldo, Claudia; Antia-Montoya, German

2016-10-01

From July to September of 2012, the fauna of flying insects visiting the anatomy and embalming laboratory of the Tecnológico de Antioquia, Faculty of Forensic Sciences, located in the city of Medellin, Colombia, were recorded. The first checklist in the literature of incidental flying insects occurring in this type of locale is provided, and a brief discussion is given of their behavioral habits related to this uncommon case. Copyright © 2016 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Stability of knee ligament complex of Thiel-embalmed cadaver compared to in vivo knee.

PubMed

Völlner, Florian; Pilsl, Ulrike; Craiovan, Benjamin; Zeman, Florian; Schneider, Michael; Wörner, Michael; Grifka, Joachim; Weber, Markus

2017-07-01

The first biomechanical evaluation of new implants is usually carried out with cadavers. Fixation of Thiel-embalmed cadavers is supposed to preserve the histological structure, colour and consistency of the tissue and has a low risk of infection and toxicity. However, the biomechanical properties of Thiel-fixated tissue are still unknown. The aim of this study was to quantify the effect of the Thiel-embalming method on the elastic properties of the ligament complex of the knee compared to in vivo knees during total knee arthroplasty. The results of biomechanical tensile tests with 10 Thiel-embalmed knees were compared with the findings of 10 patients who underwent total knee arthroplasty with a standardised knee balancer at our department. We reconstructed the force-elongation curves of the medial and lateral ligament complex and calculated the stiffness in direct correlation with overall soft tissue stability in full extension and in 90° of flexion. All curves consisted of a non-linear part at the beginning and a linear part from about 80N onwards. In full extension, median stiffness in the cadavers was 26.6N/mm for the medial compartment and 31.6N/mm for the lateral compartment. The values for in vivo were 25.7N/mm for the medial compartment and 25.3N/mm for the lateral compartment (p=0.684 for the medial compartment and p=0.247 for the lateral compartment). In 90° of flexion, median stiffness in the cadaver group was 24.7N/mm for the medial compartment and 22.2N/mm for the lateral compartment. In vivo, median stiffness was 30.3N/mm for the medial compartment and 29.2N/mm for the lateral compartment (p=0.009 for the medial compartment and p=0.143 for the lateral compartment). Stiffness of the medial and lateral ligament complex in the knee was comparable between Thiel-embalmed cadavers and in vivo patients during total knee arthroplasty. Thiel fixation seems to preserve the soft tissue properties similar to those in vivo. Copyright © 2017 Elsevier Ltd. All rights reserved.

Cadaver embalming fluid for surgical training courses: modified Larssen solution.

PubMed

Bilge, Okan; Celik, Servet

2017-11-01

10% Formalin (F10)-fixed cadavers have disadvantages such as disturbing smell, mucosal irritation, discoloration and rigidity. We aimed to determine a suitable, simple and cost-effective embalming method that preserves color, texture, pliability and flexibility of the tissues for a long time without a disturbing smell and mucosal irritation. The embalmed cadavers were expected to be durable against environmental effects, utilizable for multiple and repetitive surgical trainings and instrumentations. Eight male (six intact, two autopsied bodies) and four female (three intact and one imported trunk) human cadavers were preserved with modified Larssen solution (MLS). Preserved bodies were kept in the deep freezers at -18/-20 °C. Bodies were allowed to thaw at room temperature 3 days prior to use. They were used in postgraduate hands-on courses for several medical disciplines. Each course lasted at least 1 day and during this period the bodies were stayed at room temperature. Assessments of 30 trainers and 252 trainees were collected during the courses. Additionally, the organoleptic characteristics of the fresh frozen (FF), preserved with MLS and F10-fixed cadavers were compared. The colors of muscles, fasciae, fatty tissue, nerves and vessels were evaluated and life-like tissues of MLS cadavers were impressive. There were no obvious or disturbing smell and sign of putrefaction of the MLS cadavers. MLS is a sustainable and relatively affordable soft cadaver embalming method. Its application is same as in other conventional methods and does not need new equipment. This article indicates the success of the MLS method in human cadavers.

Sulci of the liver found after death: Their nature and potential teaching value.

PubMed

Macchi, V; Porzionato, A; Stecco, C; Parenti, A; Newell, R L M; De Caro, R

2013-07-01

Accessory sulci of the liver are more commonly found after death than in life, raising questions as to their causation and possible classification. We have analyzed a group of 180 livers sampled from un-embalmed (96) and embalmed cadavers (84). In un-embalmed cadavers, no accessory sulci were found on the diaphragmatic surface in 58 cases. Diaphragmatic sulci were found in the right lobe of 38 livers. When removed from the abdominal cavity and placed flat on the examination table (the "bench position") all 58 livers without sulci appreciable in the abdominal cavity showed the appearance of two sulci. The first ran from the right side of the inferior vena cava (IVC), curving anteriorly to the inferior border of the liver, at a point midway between the right extremity of the inferior border and the gallbladder fossa, concave towards the left. The second sulcus ran from the left side of the IVC, curving anteriorly to reach the inferior border of the liver at the level of the gallbladder fossa, concave towards the right. With progressive side-to-side manual compression, the sulci on the diaphragmatic surface become more evident. Division of the hepatic parenchyma along the two sulci exposed the right and middle hepatic veins respectively in more than 90% of cases. In embalmed cadavers, 24 livers showed antero-posterior sulci in the superior surface, visible and palpable on the liver examined in situ. When the livers with sulci had been removed from the abdomen for further examination, the appearance of the superior surface did not change. In a removed liver, accessory sulci can be divided into true, "diaphragmatic," sulci and "false" sulci due to the position of the free liver on the examination table. The "false" sulci may be considered as further morphological evidence of the functional anatomical division of the liver. Their demonstration may also be useful in teaching its topographical and surgical anatomy. Copyright © 2012 Wiley Periodicals, Inc.

The embalming, the scientific method and the paleopathology: the case of Gaetano Arrighi (1836).

PubMed

Ciranni, Rosalba; Caramella, Davide; Nenci, Riccardo; Fornaciari, Gino

2005-01-01

Since the most ancient times the problem of the artificial preservation of dead bodies has been an important object of study. In ancient and classic times the reasons leading to this practice were essentially of a religious and esoteric type, but in the modern age, following the development of medical and biological studies, embalming has assumed a more practical trend which is both medicine and scientific. The discovery of blood circulation has marked the scientific method which, in its various forms, has circulated all over Europe bringing fame to eminent anatomists such as Federico Ruysch (1638-1731), William (1718-1783) and John Hunter (1728-1793), Jean Nicolas Gannal (1791-1852), Giuseppe Tranchina, Laskowky and Brosch, who affirmed the embalming by endoarterial injection of conservation fluids making evisceration useless and obsolete. The advent of formalin and the introduction of new surgical and autoptic methods have made this practice gradually fall into disuse. For this reason, the mummy found in Leghorn (Tuscany, Central Italy) is of particular importance since was obtained applying the intravascular injection following the method, described by the Italian medical Giuseppe Tranchina in 1835. The mummified body belongs to Gaetano Arrighi, a prisoner in the Leghorn fortress. He was born in Arezzo in 1789 and died on March 1836 at the age of 47 in the Civil Hospital of Leghorn following pleurisy, as results in an annexed document. The day after his death Dr. Raimondo Barsanti from Pisa and Superintendent at the Leghorn hospital made up the Tranchina's method, which consisted in the injection of an arsencial -mercury solution inside of the blood vessels, giving rigidity and dark red color to the dead body. The excellent outcome of the intervention has made it possible, more than 160 years later, to study not only the method by which Arrighi's body was embalmed but also to perform a careful paleopathological imaging study by traditional X-rays and by Computer Axial Tomography (CAT). The high percentage of mercury present in the conservation fluid conferred radiopacity, making it possible to evidence the diffusion of the liquid into the entire artery tree and in particular into the aorta as well as in all the right and left artery systems. The radiopacity showed an unusual thoracic picture suggesting a pathological situation. The CAT study enriched and ameliorated the results obtained by X-rays making it possible to reconstruct the embalming procedure and to confirm the diagnosis of wet pleurisy probably cause by a tubercular infection.

Historical sources about diseases, death and embalming regarding the family of Jean Antoine Michel Agar, Minister of Finance of Gioacchino Murat.

PubMed

Marinozzi, S; Gazzaniga, V; Giuffra, V; Fornaciari, G

2011-06-01

Among the mummies preserved in the Basilica of San Domenico Maggiore in Naples, there are the bodies of the wife and three children of Jean Antoine Michel Agar, Minister of Finance of Naple's Kingdom during the Monarchy of Joachim Murat (1808-1815). Between 1983 and 1987 paleopathological analyses were performed; in particular, X-ray examination allowed investigation of the health status of the Agar family members and reconstruction of the embalming processes used to preserve the bodies. In addition, an analysis of the historical and archival documents was carried out, to formulate hypotheses about the causes of death, demonstrating how these sources could become important instruments to obtain diagnoses and pathological histories.

Release from prey preservation behavior via prey switch allowed diversification of cuticular hydrocarbon profiles in digger wasps.

PubMed

Wurdack, Mareike; Polidori, Carlo; Keller, Alexander; Feldhaar, Heike; Schmitt, Thomas

2017-11-01

The cuticle of insects is covered by a layer of hydrocarbons (CHC), whose original function is the protection from desiccation and pathogens. However, in most insects CHC profiles are species specific. While this variability among species was largely linked to communication and recognition functions, additional selective forces may shape insect CHC profiles. Here, we show that in Philanthinae digger wasps (Crabronidae) the CHC profile coevolved with a peculiar brood-care strategy. In particular, we found that the behavior to embalm prey stored in the nest with hydrocarbons is adaptive to protect larval food from fungi in those species hunting for Hymenoptera. The prey embalming secretion is identical in composition to the alkene-dominated CHC profile in these species, suggesting that their profile is adaptively conserved for this purpose. In contrast, prey embalming is not required in those species that switched to Coleoptera as prey. Released from this chemical brood-care strategy, Coleoptera-hunting species considerably diversified their CHC profiles. Differential needs to successfully protect prey types used as larval food have thus driven the diversification of CHCs profiles of female Philanthinae wasps. To the best of our knowledge, this is the first evidence of a direct link between selection pressure for food preservation and CHC diversity. © 2017 The Author(s). Evolution © 2017 The Society for the Study of Evolution.

Mapping tissue shear modulus on Thiel soft-embalmed mouse skin with shear wave optical coherence elastography

NASA Astrophysics Data System (ADS)

Song, Shaozhen; Joy, Joyce; Wang, Ruikang K.; Huang, Zhihong

2015-03-01

A quantitative measurement of the mechanical properties of biological tissue is a useful assessment of its physiologic conditions, which may aid medical diagnosis and treatment of, e.g., scleroderma and skin cancer. Traditional elastography techniques such as magnetic resonance elastography and ultrasound elastography have limited scope of application on skin due to insufficient spatial resolution. Recently, dynamic / transient elastography are attracting more applications with the advantage of non-destructive measurements, and revealing the absolute moduli values of tissue mechanical properties. Shear wave optical coherence elastography (SW-OCE) is a novel transient elastography method, which lays emphasis on the propagation of dynamic mechanical waves. In this study, high speed shear wave imaging technique was applied to a range of soft-embalmed mouse skin, where 3 kHz shear waves were launched with a piezoelectric actuator as an external excitation. The shear wave velocity was estimated from the shear wave images, and used to recover a shear modulus map in the same OCT imaging range. Results revealed significant difference in shear modulus and structure in compliance with gender, and images on fresh mouse skin are also compared. Thiel embalming technique is also proven to present the ability to furthest preserve the mechanical property of biological tissue. The experiment results suggest that SW-OCE is an effective technique for quantitative estimation of skin tissue biomechanical status.

Inert Reassessment Document for Camphor - CAS No. 76-22-2

EPA Pesticide Factsheets

Camphor is used as a topical liniment, preservative in pharmaceuticalsand cosmetics, moth repellant, and plasticizer for esters, as well as in lacquers & varnishes, explosives, embalming fluid, and the manufacture of plastics and cymene.

Petamenophis (Padiamenemipet), an Egyptian Child Mummy Protected for Eternity: Revelation by Multidetector Computed Tomography.

PubMed

Martina, Maria Cristina; Cesarani, Federico; Boano, Rosa; Fiore Marochetti, Elisa; Gandini, Giovanni

The objective of our work was to report the most recent findings obtained with multidetector computed tomography of a child mummy from the Roman period (119-123 CE) housed at the Egyptian Museum in Turin, Italy. Multidetector computed tomography and postprocessing were applied to understand the embalming techniques, the nature of a foreign object, and anthropometrical values. The information was compared with that from other mummies that were buried in the same tomb, but today housed in different museums. New information regarding the embalming technique was revealed. Multidetector computed tomography allowed the identification of a knife-like metallic object, probably an amulet for the child's protection in the afterlife. Multidetector computed tomography and image postprocessing confirm their valuable role in noninvasive studies in ancient mummies and provided evidence of a unique cultural practice in the late history of Ancient Egypt such as placing a knife possibly as an amulet.

Applied anatomy of a new approach of endoscopic technique in thyroid gland surgery.

PubMed

Liu, Hong; Xie, Yong-jun; Xu, Yi-quan; Li, Chao; Liu, Xing-guo

2012-10-01

To explore the feasibility and safety of transtracheal assisted sublingual approach to totally endoscopic thyroidectomy by studying the anatomical approach and adjacent structures. A total of 5 embalmed adult cadavers from Chengdu Medical College were dissected layer by layer in the cervical region, pharyngeal region, and mandible region, according to transtracheal assisted sublingual approach that was verified from the anatomical approach and planes. A total of 15 embalmed adult cadavers were dissected by arterial vascular casting technique, imaging scanning technique, and thin layer cryotomy. Then the vessel and anatomical structures of thyroid surgical region were analyzed qualitatively and quantitatively. Three-dimensional visualization of larynx artery was reconstructed by Autodesk 3ds Max 2010(32). Transtracheal assisted sublingual approach for totally endoscopic thyroidectomy was simulated on 5 embalmed adult cadavers. The sublingual observed access was located in the middle of sublingual region. The geniohyoid muscle, mylohyoid seam, and submental triangle were divided in turn in the middle to reach the plane under the plastima muscles. Superficial cervical fascia, anterior body of hyoid bone, and infrahyoid muscles were passed in sequence to reach thyroid gland surgical region. The transtracheal operational access was placed from the cavitas oris propria, isthmus faucium, subepiglottic region, laryngeal pharynx, and intermediate laryngeal cavit, and then passed from the top down in order to reach pars cervicalis tracheae where a sagittal incision was made in the anterior wall of cartilagines tracheales to reach a ascertained surgical region. Transtracheal assisted sublingual approach to totally endoscopic thyroidectomy is anatomically feasible and safe and can be useful in thyroid gland surgery.

Bone conduction responses of middle ear structures in Thiel embalmed heads

NASA Astrophysics Data System (ADS)

Arnold, Andreas; Stieger, Christof; Caversaccio, Marco; Kompis, Martin; Guignard, Jérémie

2015-12-01

Thiel-embalmed human whole-head specimens offer a promising alternative model for bone conduction (BC) studies of middle ear structures. In this work we present the Thiel model's linearity and stability over time as well as its possible use in the study of a fixed ossicle chain. Using laser Doppler vibrometry (LDV), the motion of the retroauricular skull, the promontory, the stapes footplate and the round window (RW) were measured. A bone-anchored hearing aid stimulated the ears with step sinus tones logarithmically spread between 0.1 and 10 kHz. Linearity of the model was verified using input levels in steps of 10 dBV. The stability of the Thiel model over time was examined with measurements repeated after hours and weeks. The influence of a cement-fixed stapes was assessed. The middle ear elements measured responded linearly in amplitude for the applied input levels (100, 32.6, and 10 mV). The variability of measurements for both short- (2 h) and long-term (4-16 weeks) repetitions in the same ear was lower than the interindividual difference. The fixation of the stapes induced a lowered RW displacement for frequencies near 750 Hz (-4 dB) and an increased displacement for frequencies above 1 kHz (max. +3.7 dB at 4 kHz). LDV assessment of BC-induced middle ear motion in Thiel heads can be performed with stable results. The vibratory RW response is affected by the fixation of the stapes, indicating a measurable effect of ossicle chain inertia on BC response in Thiel embalmed heads.

History and future of human cadaver preservation for surgical training: from formalin to saturated salt solution method.

PubMed

Hayashi, Shogo; Naito, Munekazu; Kawata, Shinichi; Qu, Ning; Hatayama, Naoyuki; Hirai, Shuichi; Itoh, Masahiro

2016-01-01

Traditionally, surgical training meant on-the-job training with live patients in an operating room. However, due to advancing surgical techniques, such as minimally invasive surgery, and increasing safety demands during procedures, human cadavers have been used for surgical training. When considering the use of human cadavers for surgical training, one of the most important factors is their preservation. In this review, we summarize four preservation methods: fresh-frozen cadaver, formalin, Thiel's, and saturated salt solution methods. Fresh-frozen cadaver is currently the model that is closest to reality, but it also presents myriad problems, including the requirement of freezers for storage, limited work time because of rapid putrefaction, and risk of infection. Formalin is still used ubiquitously due to its low cost and wide availability, but it is not ideal because formaldehyde has an adverse health effect and formalin-embalmed cadavers do not exhibit many of the qualities of living organs. Thiel's method results in soft and flexible cadavers with almost natural colors, and Thiel-embalmed cadavers have been appraised widely in various medical disciplines. However, Thiel's method is relatively expensive and technically complicated. In addition, Thiel-embalmed cadavers have a limited dissection time. The saturated salt solution method is simple, carries a low risk of infection, and is relatively low cost. Although more research is needed, this method seems to be sufficiently useful for surgical training and has noteworthy features that expand the capability of clinical training. The saturated salt solution method will contribute to a wider use of cadavers for surgical training.

Defining the impaction frequency and threshold force required for femoral impaction grafting in revision hip arthroplasty

PubMed Central

2011-01-01

Background and purpose The two most common complications of femoral impaction bone grafting are femoral fracture and massive implant subsidence. We investigated fracture forces and implant subsidence rates in embalmed human femurs undergoing impaction grafting. The study consisted of two arms, the first examining the force at which femoral fracture occurs in the embalmed human femur, and the second examining whether significant graft implant/subsidence occurs following impaction at a set force at two different impaction frequencies. Methods Using a standardized impaction grafting technique with modifications, an initial group of 17 femurs underwent complete destructive impaction testing, allowing sequentially increased, controlled impaction forces to be applied until femoral fracture occurred. A second group of 8 femurs underwent impaction bone grafting at constant force, at an impaction frequency of 1 Hz or 10 Hz. An Exeter stem was cemented into the neomedullary canals. These constructs underwent subsidence testing simulating the first 2 months of postoperative weight bearing. Results No femurs fractured below an impaction force of 0.5 kN. 15/17 of the femurs fractured at or above 1.6 kN of applied force. In the second group of 8 femurs, all of which underwent femoral impaction grafting at 1.6 kN, there was no correlation between implant subsidence and frequency of impaction. Average subsidence was 3.2 (1–9) mm. Interpretation It is possible to calculate a force below which no fracture occurs in the embalmed human femur undergoing impaction grafting. Higher impaction frequency at constant force did not reduce rates of implant subsidence in this experiment. PMID:21689068

Subcutaneous packing in royal Egyptian mummies dated from 18th to 20th dynasties.

PubMed

Saleem, Sahar N; Hawass, Zahi

2015-01-01

It has been widely disseminated in the literature that subcutaneous packing, as part of mummification, was not usually done until the 21st dynasty. We aimed to study by computed tomography (CT) if subcutaneous packing was part of mummification of royal Egyptians dated to 18th to 20th dynasties. We analyzed the 2- and 3-dimensional CT images of 13 royal mummies dated to circa 1550 to 1153 BC for presence of subcutaneous embalming materials. Among the studied mummies were Amenhotep III, Tutankhamun, Seti I, and Ramesses II. We reported the CT characters of any detected subcutaneous embalming materials and noted their impact on the morphology of the involved body part. We correlated the CT findings with the archeological literature. Computed tomographic images showed subcutaneous packing in 12 (92.3%) mummies; whereas the mummy that was previously known as "Thutmose I" showed no such evidence. Subcutaneous packing involved the faces (n = 11), necks (n = 4), torsos (n = 5), and/or extremities (n = 4) of the mummies. Subcutaneous filling materials showed variation in homogeneity and CT densities and they were likely composed of resin, bits of linen with resin, or other substances. Subcutaneous packing procedure succeeded in providing uniform full contour of the involved body regions without causing significant tissue damages. Subcutaneous packing procedure was used as part of mummification of royal Ancient Egyptians dated to 18th to 20th dynasties earlier than what was believed in archaeology. The Ancient Egyptian embalmers must have been skilled in dissection and possessed surgical tools that enabled them to perform this fine procedure.

Correlation of contrast-detail analysis and clinical image quality assessment in chest radiography with a human cadaver study.

PubMed

De Crop, An; Bacher, Klaus; Van Hoof, Tom; Smeets, Peter V; Smet, Barbara S; Vergauwen, Merel; Kiendys, Urszula; Duyck, Philippe; Verstraete, Koenraad; D'Herde, Katharina; Thierens, Hubert

2012-01-01

To determine the correlation between the clinical and physical image quality of chest images by using cadavers embalmed with the Thiel technique and a contrast-detail phantom. The use of human cadavers fulfilled the requirements of the institutional ethics committee. Clinical image quality was assessed by using three human cadavers embalmed with the Thiel technique, which results in excellent preservation of the flexibility and plasticity of organs and tissues. As a result, lungs can be inflated during image acquisition to simulate the pulmonary anatomy seen on a chest radiograph. Both contrast-detail phantom images and chest images of the Thiel-embalmed bodies were acquired with an amorphous silicon flat-panel detector. Tube voltage (70, 81, 90, 100, 113, 125 kVp), copper filtration (0.1, 0.2, 0.3 mm Cu), and exposure settings (200, 280, 400, 560, 800 speed class) were altered to simulate different quality levels. Four experienced radiologists assessed the image quality by using a visual grading analysis (VGA) technique based on European Quality Criteria for Chest Radiology. The phantom images were scored manually and automatically with use of dedicated software, both resulting in an inverse image quality figure (IQF). Spearman rank correlations between inverse IQFs and VGA scores were calculated. A statistically significant correlation (r = 0.80, P < .01) was observed between the VGA scores and the manually obtained inverse IQFs. Comparison of the VGA scores and the automated evaluated phantom images showed an even better correlation (r = 0.92, P < .001). The results support the value of contrast-detail phantom analysis for evaluating clinical image quality in chest radiography. © RSNA, 2011.

Investigation into the visual perceptive ability of anaesthetists during ultrasound-guided interscalene and femoral blocks conducted on soft embalmed cadavers: a randomised single-blind study.

PubMed

Mustafa, A; Seeley, J; Munirama, S; Columb, M; McKendrick, M; Schwab, A; Corner, G; Eisma, R; Mcleod, G

2018-04-01

Errors may occur during regional anaesthesia whilst searching for nerves, needle tips, and test doses. Poor visual search impacts on decision making, clinical intervention, and patient safety. We conducted a randomised single-blind study in a single university hospital. Twenty trainees and two consultants examined the paired B-mode and fused B-mode and elastography video recordings of 24 interscalene and 24 femoral blocks conducted on two soft embalmed cadavers. Perineural injection was randomised equally to 0.25, 0.5, and 1.0 ml volumes. Tissue displacement perceived on both imaging modalities was defined as 'target' or 'distractor'. Our primary objective was to test the anaesthetists' perception of the number and proportion of targets and distractors on B-mode and fused elastography videos collected during femoral and sciatic nerve block on soft embalmed cadavers. Our secondary objectives were to determine the differences between novices and experts, and between test-dose volumes, and to measure the area and brightness of spread and strain patterns. All anaesthetists recognised perineural spread using 0.25 ml volumes. Distractor patterns were recognised in 133 (12%) of B-mode and in 403 (38%) of fused B-mode and elastography patterns; P<0.001. With elastography, novice recognition improved from 12 to 37% (P<0.001), and consultant recognition increased from 24 to 53%; P<0.001. Distractor recognition improved from 8 to 31% using 0.25 ml volumes (P<0.001), and from 15 to 45% using 1 ml volumes (P<0.001). Visual search improved with fusion elastography, increased volume, and consultants. A need exists to investigate image search strategies. Copyright © 2018 British Journal of Anaesthesia. Published by Elsevier Ltd. All rights reserved.

A comparative study of vascular injection fluids in fresh-frozen and embalmed human cadaver forearms.

PubMed

Doomernik, D E; Kruse, R R; Reijnen, M M P J; Kozicz, T L; Kooloos, J G M

2016-10-01

Over the years, various vascular injection products have been developed to facilitate anatomical dissections. This study aimed to compare the most commonly used vascular injection products in fresh-frozen and formalin-embalmed cadaver specimens. An overview of the properties, advantages and limitations of each substance was given, and a comparison of vascular infusion procedures in both preservation methods was made. A literature search was performed in order to identify the most commonly used vascular injection products. Acrylic paint, latex, gelatin, silicone, Araldite F and Batson's No. 17 were selected for the study. One fresh-frozen and one embalmed cadaver forearm were infused with each injection product according to a uniform protocol. The curing time, skin- and subcutaneous tissue penetration, degree of filling of the arterial tree, extravasations, consistency of the injected vessels during dissection, and the costs of each injection fluid were noted. There was a large variation between the injection fluids in processing- and curing time, colour intensity, flexibility, fragility, elasticity, strength, toxicity and costs. All fluids were suitable for infusion. The penetration of injection fluid into the skin and subcutaneous tissue was significantly better in fresh-frozen specimens (P = 0.002 and P = 0.009, respectively), with significantly smaller branches casted (P = 0.004). Vascular infusion of fresh-frozen cadaver specimens results in a significantly better filled coloured arterial tree, enabling more detail to be achieved and smaller branches casted. The biomechanical properties of fresh-frozen soft tissues are less affected compared with formalin fixation. All the injection fluids studied are suitable for vascular infusion, but their different properties ensure that certain products and procedures are more suitable for specific study purposes. © 2016 Anatomical Society.

Enhancement of anatomical learning and developing clinical competence of first-year medical and allied health profession students.

PubMed

Keim Janssen, Sarah A; VanderMeulen, Stephane P; Shostrom, Valerie K; Lomneth, Carol S

2014-01-01

Hands-on educational experiences can stimulate student interest, increase knowledge retention, and enhance development of clinical skills. The Lachman test, used to assess the integrity of the anterior cruciate ligament (ACL), is commonly performed by health care professionals and is relatively easy to teach to first-year health profession students. This study integrated teaching the Lachman test into a first-year anatomy laboratory and examined if students receiving the training would be more confident, competent, and if the training would enhance anatomical learning. First-year medical, physician assistant and physical therapy students were randomly assigned into either the intervention (Group A) or control group (Group B). Both groups received the course lecture on knee anatomy and training on how to perform the Lachman test during a surface anatomy class. Group A received an additional 15 minutes hands-on training for the Lachman test utilizing a lightly embalmed cadaver as a simulated patient. One week later, both groups performed the Lachman test on a lightly embalmed cadaver and later completed a post-test and survey. Students with hands-on training performed significantly better than students with lecture-only training in completing the checklist, a post-test, and correctly diagnosing an ACL tear. Students in Group A also reported being more confident after hands-on training compared to students receiving lecture-only training. Both groups reported that incorporating clinical skill activities facilitated learning and created excitement for learning. Hands-on training using lightly embalmed cadavers as patient simulators increased confidence and competence in performing the Lachman test and aided in learning anatomy. © 2013 American Association of Anatomists.

TVT-S in the U position--anatomical study.

PubMed

Hubka, Petr; Nanka, Ondrej; Martan, Alois; Grim, Milos; Zvarova, Jana; Masata, Jaromir

2011-02-01

The objective is to describe the anatomical position of tension-free vaginal tape Secur (TVT-S) in the U position regarding possible injury and fixation site. We placed TVT-S inserters bilaterally in 13 embalmed and five fresh frozen female bodies. After dissection, we measured distances from the obturator bundle. In embalmed bodies, the mean distance of TVT-S from the obturator bundle was 2.83 cm (standard deviation (SD) 0.87 cm) on the left, 2.92 cm (SD 1.24 cm) on the right. Perforation of the fascia of obturator internus muscle occurred in 38.5%. In fresh frozen bodies, results were fundamentally similar (p > 0.05). There is a risk of injury to the obturator bundle and urinary bladder during TVT-S; however, there is a significant risk of inserting the TVT-S inserter outside the obturator internus muscle (into the lesser pelvis). The position of TVT-S does not change significantly after legs mal-positioning.

Procedures and Frequencies of Embalming and Heart Extractions in Modern Period in Brittany. Contribution to the Evolution of Ritual Funerary in Europe

PubMed Central

Dedouit, Fabrice; Duchesne, Sylvie; Mokrane, Fatima-Zohra; Gendrot, Véronique; Gérard, Patrice; Dabernat, Henri; Crubézy, Éric; Telmon, Norbert

2016-01-01

The evolution of funeral practices from the Middle Ages through the Modern era in Europe is generally seen as a process of secularization. The study, through imaging and autopsy, of two mummies, five lead urns containing hearts, and more than six hundred skeletons of nobles and clergymen from a Renaissance convent in Brittany has led us to reject this view. In addition to exceptional embalming, we observed instances in which hearts alone had been extracted, a phenomenon that had never before been described, and brains alone as well, and instances in which each spouse's heart had been placed on the other's coffin. In some identified cases we were able to establish links between the religious attitudes of given individuals and either ancient Medieval practices or more modern ones generated by the Council of Trent. All of these practices, which were a function of social status, were rooted in religion. They offer no evidence of secularization whatsoever. PMID:28030554

Guidelines for the recognition of cemetery remains in Greece.

PubMed

Eliopoulos, Constantine; Moraitis, Konstantinos; Reyes, Federico; Spiliopoulou, Chara; Manolis, Sotiris

2011-06-01

Forensic pathologists frequently consult anthropologists for the identification of skeletonized human remains. These remains may be the result of criminal activity or remains that were unearthed because of erosion, or during construction projects. In some cases, human remains that had been previously buried in a cemetery may be the subject of a forensic investigation. Early recognition of cemetery remains prevents unnecessary efforts and conserves precious resources. One of the key characteristics of cemetery remains is the presence of embalmed tissue. However, there are countries where embalming is not a common practice, and other clues must be sought for identifying previously buried remains. Current funerary customs in Greece and, in particular, the tradition of exhumations result in a large number of misplaced human remains. The present study presents examples of cemetery remains from Greece and offers guidelines for recognizing changes on skeletal remains that may be indicative of a cemetery origin. Location of discovery, condition of the remains, and the types of associated artifacts are all factors that aid forensic anthropologists in identifying cemetery remains.

16 CFR 453.2 - Price disclosures.

Code of Federal Regulations, 2014 CFR

2014-01-01

... specific funeral goods and funeral services used in connection with the disposition of deceased human bodies, including at least the price of embalming, transportation of remains, use of facilities, caskets... the body; (H) Use of facilities and staff for viewing; (I) Use of facilities and staff for funeral...

16 CFR 453.2 - Price disclosures.

Code of Federal Regulations, 2013 CFR

2013-01-01

... specific funeral goods and funeral services used in connection with the disposition of deceased human bodies, including at least the price of embalming, transportation of remains, use of facilities, caskets... the body; (H) Use of facilities and staff for viewing; (I) Use of facilities and staff for funeral...

16 CFR 453.2 - Price disclosures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... specific funeral goods and funeral services used in connection with the disposition of deceased human bodies, including at least the price of embalming, transportation of remains, use of facilities, caskets... the body; (H) Use of facilities and staff for viewing; (I) Use of facilities and staff for funeral...

16 CFR 453.2 - Price disclosures.

Code of Federal Regulations, 2011 CFR

2011-01-01

... specific funeral goods and funeral services used in connection with the disposition of deceased human bodies, including at least the price of embalming, transportation of remains, use of facilities, caskets... the body; (H) Use of facilities and staff for viewing; (I) Use of facilities and staff for funeral...

16 CFR 453.2 - Price disclosures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... specific funeral goods and funeral services used in connection with the disposition of deceased human bodies, including at least the price of embalming, transportation of remains, use of facilities, caskets... the body; (H) Use of facilities and staff for viewing; (I) Use of facilities and staff for funeral...

48 CFR 837.7003 - Funeral authorization.

Code of Federal Regulations, 2013 CFR

2013-10-01

... be of sufficient strength to support the weight of an adult human body. Cardboard or press paper or... provided. The services must consist of the following: (1) Preparation of the body, embalming. (2) Clothing...) accompanies the casket to the place of burial. (c) An additional allowance for transportation of the body to...

48 CFR 837.7003 - Funeral authorization.

Code of Federal Regulations, 2012 CFR

2012-10-01

... be of sufficient strength to support the weight of an adult human body. Cardboard or press paper or... provided. The services must consist of the following: (1) Preparation of the body, embalming. (2) Clothing...) accompanies the casket to the place of burial. (c) An additional allowance for transportation of the body to...

48 CFR 837.7003 - Funeral authorization.

Code of Federal Regulations, 2014 CFR

2014-10-01

... be of sufficient strength to support the weight of an adult human body. Cardboard or press paper or... provided. The services must consist of the following: (1) Preparation of the body, embalming. (2) Clothing...) accompanies the casket to the place of burial. (c) An additional allowance for transportation of the body to...

48 CFR 837.7003 - Funeral authorization.

Code of Federal Regulations, 2011 CFR

2011-10-01

... be of sufficient strength to support the weight of an adult human body. Cardboard or press paper or... provided. The services must consist of the following: (1) Preparation of the body, embalming. (2) Clothing...) accompanies the casket to the place of burial. (c) An additional allowance for transportation of the body to...

48 CFR 837.7003 - Funeral authorization.

Code of Federal Regulations, 2010 CFR

2010-10-01

... be of sufficient strength to support the weight of an adult human body. Cardboard or press paper or... provided. The services must consist of the following: (1) Preparation of the body, embalming. (2) Clothing...) accompanies the casket to the place of burial. (c) An additional allowance for transportation of the body to...

16 CFR 453.3 - Misrepresentations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Misrepresentations. (a) Embalming provisions—(1) Deceptive acts or practices. In selling or offering to sell funeral... practices. In selling or offering to sell funeral goods or funeral services to the public, it is a deceptive... practices. In selling or offering to sell funeral goods and funeral services to the public, it is a...

Dilated Canine Hearts: A Specimen for Teaching Cardiac Anatomy

ERIC Educational Resources Information Center

Cope, Lee Anne

2008-01-01

Dilated canine hearts were used to teach undergraduate students internal and external cardiac anatomy. The specimens were dilated using hydrostatic pressure and then fixed using 5% formalin. These specimens provided the students with an alternative to prepackaged embalmed hearts and anatomical models for studying the external and internal cardiac…

Ethanol-Glycerin Fixation with Thymol Conservation: A Potential Alternative to Formaldehyde and Phenol Embalming

ERIC Educational Resources Information Center

Hammer, Niels; Loffler, Sabine; Feja, Christine; Sandrock, Mara; Schmidt, Wolfgang; Bechmann, Ingo; Steinke, Hanno

2012-01-01

Anatomical fixation and conservation are required to prevent specimens from undergoing autolysis and decomposition. While fixation is the primary arrest of the structures responsible for autolysis and decomposition, conservation preserves the state of fixation. Although commonly used, formaldehyde has been classified as carcinogenic to humans. For…

Through the Looking Glass: Examining the Practice of Science Classroom Dissection with a Multi-Faceted Lens

ERIC Educational Resources Information Center

Witte, Melissa Marie

2014-01-01

Dissection of lab specimens is a common procedure in science classrooms, yet there are many unasked and unexamined questions relating to this practice. In addition to ethical considerations, there are personal and environmental health impacts of using conventional dissection, which has historically included animals and animal organs embalmed in…

A Qualitative Assessment of Human Cadavers Embalmed by Thiel's Method Used in Laparoscopic Training for Renal Resection

ERIC Educational Resources Information Center

Rai, Bhavan Prasad; Tang, Benjie; Eisma, Roos; Soames, Roger W.; Wen, Haitao; Nabi, Ghulam

2012-01-01

Human cadaveric tissue is the fundamental substrate for basic anatomic and surgical skills training. A qualitative assessment of the use of human cadavers preserved by Thiel's method for a British Association of Urological Surgeons--approved, advanced laparoscopic renal resection skills training course is described in the present study. Four…

Take Away Body Parts! An Investigation into the Use of 3D-Printed Anatomical Models in Undergraduate Anatomy Education

ERIC Educational Resources Information Center

Smith, Claire F.; Tollemache, Nicholas; Covill, Derek; Johnston, Malcolm

2018-01-01

Understanding the three-dimensional (3D) nature of the human form is imperative for effective medical practice and the emergence of 3D printing creates numerous opportunities to enhance aspects of medical and healthcare training. A recently deceased, un-embalmed donor was scanned through high-resolution computed tomography. The scan data underwent…

The Chinese Visible Human (CVH) datasets incorporate technical and imaging advances on earlier digital humans

PubMed Central

Zhang, Shao-Xiang; Heng, Pheng-Ann; Liu, Zheng-Jin; Tan, Li-Wen; Qiu, Ming-Guo; Li, Qi-Yu; Liao, Rong-Xia; Li, Kai; Cui, Gao-Yu; Guo, Yan-Li; Yang, Xiao-Ping; Liu, Guang-Jiu; Shan, Jing-Lu; Liu, Ji-Jun; Zhang, Wei-Guo; Chen, Xian-Hong; Chen, Jin-Hua; Wang, Jian; Chen, Wei; Lu, Ming; You, Jian; Pang, Xue-Li; Xiao, Hong; Xie, Yong-Ming; Cheng, Jack Chun-Yiu

2004-01-01

We report the availability of a digitized Chinese male and a digitzed Chinese female typical of the population and with no obvious abnormalities. The embalming and milling procedures incorporate three technical improvements over earlier digitized cadavers. Vascular perfusion with coloured gelatin was performed to facilitate blood vessel identification. Embalmed cadavers were embedded in gelatin and cryosectioned whole so as to avoid section loss resulting from cutting the body into smaller pieces. Milling performed at −25 °C prevented small structures (e.g. teeth, concha nasalis and articular cartilage) from falling off from the milling surface. The male image set (.tiff images each of 36 Mb) has a section resolution of 3072 × 2048 pixels (∼170 μm, the accompanying magnetic resonance imaging and computer tomography data have a resolution of 512 × 512, i.e. ∼440 μm). The Chinese Visible Human male and female datasets are available at http://www.chinesevisiblehuman.com. (The male is 90.65 Gb and female 131.04 Gb). MPEG videos of direct records of real-time volume rendering are at: http://www.cse.cuhk.edu.hk/~crc PMID:15032906

The mixture of liquid foam soap, ethanol and citric acid as a new fixative-preservative solution in veterinary anatomy.

PubMed

Turan, Erkut; Gules, Ozay; Kilimci, Figen Sevil; Kara, Mehmet Erkut; Dilek, Omer Gurkan; Sabanci, Seyyid Said; Tatar, Musa

2017-01-01

The present study investigates the efficiency of liquid foam soap, ethanol, citric acid and benzalkonium chloride as a fixative-preservative solution (a soap-and ethanol-based fixing solution, or SEFS). In this study, ethanol serves as the fixative and preservative, liquid foam soap as the modifying agent, citric acid as the antioxidant and benzalkonium chloride as the disinfectant. The goat cadavers perfused with SEFS (n=8) were evaluated over a period of one year with respect to hardness, colour and odour using objective methods. Colour and hardness were compared between one fresh cadaver and the SEFS-embalmed cadavers. Histological and microbiological examinations were also performed in tissue samples. Additionally, the cadavers were subjectively evaluated after dissection and palpation. The SEFS provided the effectiveness expected over a 1-year embalming period for the animal cadavers. No bacteria or fungi were isolated except for some non-pathogenic Bacillus species. Visible mould was not present on either cadavers or in the surrounding environment. The cadavers maintained an appearance close to their original anatomical appearance, with muscles having good hardness and elasticity for dissection. Copyright © 2016 Elsevier GmbH. All rights reserved.

Attempts to revive Mycobacterium tuberculosis from 300-year-old human mummies.

PubMed

Lemma, Eshetu; Zimhony, Oren; Greenblatt, Charles L; Koltunov, Viktoria; Zylber, María Inés; Vernon, Kim; Spigelman, Mark

2008-06-01

Environmental persistence of Mycobacterium tuberculosis is subject to speculation. However, the reality that infected postmortem tissues can be a danger to pathologists and embalmers has worrisome implications. A few experimental studies have demonstrated the organism's ability to withstand exposure to embalming fluid and formalin. Recently, a failure was reported in an attempt to resuscitate an original isolate of Robert Koch to determine the lifetime of the tubercle bacillus. The present study also considers a historical approach to determine persistence under favorable environmental conditions. It asks whether acid-fast forms observed in tissues of 300-year-old Hungarian mummies can be resuscitated. Finding organisms before the advent of antibiotics and pasteurization may yield valuable genetic information. Using various media modifications, as well as guinea pig inoculation, an attempt was made to culture these tissues for M. tuberculosis. In addition, a resuscitation-promoting factor, known to increase colony counts in high G+C bacteria, was applied to the cultures. Although an occasional PCR-positive sample was detected, no colonies of M. tuberculosis were obtained. Our results may indicate that the life span of the tubercle bacillus is less than a few hundred years, even though in the short run it can survive harsh chemical treatment.

Why Did the Colonists Fight when They Were Safe, Prosperous, and Free?

ERIC Educational Resources Information Center

Schug, Mark C.

2007-01-01

In this article, the author takes a different approach in teaching U.S. history to young people. His approach is derived from economics but not economics as a long list of concepts embalmed in huge textbooks written for use in Econ 101 and 102. Instead, he suggests, history teachers can do much to improve their instruction by drawing upon a…

Practitioners' Perceptions of the Academic Preparation of Funeral Directors and Embalmers in the Context of Changing Death Care Preferences in the United States

ERIC Educational Resources Information Center

LuBrant, Michael Paul

2013-01-01

This study investigated practitioners' perceptions of the a) importance, b) academic preparation related to, and c) adequacy of, funeral service education at academic programs accredited by the American Board of Funeral Service Education (ABFSE) in the context of changing death care preferences in the United States. Participants in this…

The Utility of Cadaver-Based Approaches for the Teaching of Human Anatomy: A Survey of British and Irish Anatomy Teachers

ERIC Educational Resources Information Center

Balta, Joy Y.; Cronin, Michael; Cryan, John F.; O'Mahony, Siobhain M.

2017-01-01

Utilizing reality anatomy such as dissection and demonstrating using cadavers has been described as a superior way to create meaning. The chemicals used to embalm cadavers differentially alter the tissue of the human body, which has led to the usage of different processes along the hard to soft-fixed spectrum of preserved cadavers. A questionnaire…

Coupled Physical and Digital Cadaver Dissection Followed by a Visual Test Protocol Provides Insights into the Nature of Anatomical Knowledge and Its Evaluation

ERIC Educational Resources Information Center

Hisley, Kenneth C.; Anderson, Larry D.; Smith, Stacy E.; Kavic, Stephen M.; Tracy, J. Kathleen

2008-01-01

This research effort compared and contrasted two conceptually different methods for the exploration of human anatomy in the first-year dissection laboratory by accomplished students: "physical" dissection using an embalmed cadaver and "digital" dissection using three-dimensional volume modeling of whole-body CT and MRI image sets acquired using…

Biomechanical measurements of stopping and stripping torques during screw insertion in five types of human and artificial humeri.

PubMed

Aziz, Mina Sr; Tsuji, Matthew Rs; Nicayenzi, Bruce; Crookshank, Meghan C; Bougherara, Habiba; Schemitsch, Emil H; Zdero, Radovan

2014-05-01

During orthopedic surgery, screws are inserted by "subjective feel" in humeri for fracture fixation, that is, stopping torque, while trying to prevent accidental over-tightening that causes screw-bone interface failure, that is, stripping torque. However, no studies exist on stopping torque, stripping torque, or stopping/stripping torque ratio in human or artificial humeri. This study evaluated five types of humeri, namely, human fresh-frozen (n = 19), human embalmed (n = 18), human dried (n = 15), artificial "normal" (n = 13), and artificial "osteoporotic" (n = 13). An orthopedic surgeon used a torque screwdriver to insert 3.5-mm-diameter cortical screws into humeral shafts and 6.5-mm-diameter cancellous screws into humeral heads by "subjective feel" to obtain stopping and stripping torques. The five outcome measures were raw and normalized stopping torque, raw and normalized stripping torque, and stopping/stripping torque ratio. Normalization was done as raw torque/screw-bone interface area. For "gold standard" fresh-frozen humeri, cortical screw tests yielded averages of 1312 N mm (raw stopping torque), 30.4 N/mm (normalized stopping torque), 1721 N mm (raw stripping torque), 39.0 N/mm (normalized stripping torque), and 82% (stopping/stripping torque ratio). Similarly, fresh-frozen humeri gave cancellous screw average results of 307 N mm (raw stopping torque), 0.9 N/mm (normalized stopping torque), 392 N mm (raw stripping torque), 1.2 N/mm (normalized stripping torque), and 79% (stopping/stripping torque ratio). Of the five cortical screw parameters for fresh-frozen humeri versus other groups, statistical equivalence (p ≥ 0.05) occurred in four cases (embalmed), three cases (dried), four cases (artificial "normal"), and four cases (artificial "osteoporotic"). Of the five cancellous screw parameters for fresh-frozen humeri versus other groups, statistical equivalence (p ≥ 0.05) occurred in five cases (embalmed), one case (dried), one case (artificial "normal"), and zero cases (artificial "osteoporotic"). Stopping/stripping torque ratios were relatively constant for all groups at 77%-88% (cortical screws) and 79%-92% (cancellous screws). © IMechE 2014.

Tissue Quality Assessment Using a Novel Direct Elasticity Assessment Device (The E-Finger): A Cadaveric Study of Prostatectomy Dissection

PubMed Central

Good, Daniel W.; Khan, Ashfaq; Hammer, Steven; Scanlan, Paul; Shu, Wenmiao; Phipps, Simon; Parson, Simon H.; Stewart, Grant D.; Reuben, Robert; McNeill, S. Alan

2014-01-01

Introduction Minimally invasive radical prostatectomy (RP) (robotic and laparoscopic), have brought improvements in the outcomes of RP due to improved views and increased degrees of freedom of surgical devices. Robotic and laparoscopic surgeries do not incorporate haptic feedback, which may result in complications secondary to inadequate tissue dissection (causing positive surgical margins, rhabdosphincter damage, etc). We developed a micro-engineered device (6 mm2 sized) [E-finger]) capable of quantitative elasticity assessment, with amplitude ratio, mean ratio and phase lag representing this. The aim was to assess the utility of the device in differentiating peri-prostatic tissue types in order to guide prostate dissection. Material and Methods Two embalmed and 2 fresh frozen cadavers were used in the study. Baseline elasticity values were assessed in bladder, prostate and rhabdosphincter of pre-dissected embalmed cadavers using the micro-engineered device. A measurement grid was created to span from the bladder, across the prostate and onto the rhabdosphincter of fresh frozen cadavers to enable a systematic quantitative elasticity assessment of the entire area by 2 independent assessors. Tissue was sectioned along each row of elasticity measurement points, and stained with haematoxylin and eosin (H&E). Image analysis was performed with Image Pro Premier to determine the histology at each measurement point. Results Statistically significant differences in elasticity were identified between bladder, prostate and sphincter in both embalmed and fresh frozen cadavers (p = <0.001). Intra-class correlation (ICC) reliability tests showed good reliability (average ICC = 0.851). Sensitivity and specificity for tissue identification was 77% and 70% respectively to a resolution of 6 mm2. Conclusions This cadaveric study has evaluated the ability of our elasticity assessment device to differentiate bladder, prostate and rhabdosphincter to a resolution of 6 mm2. The results provide useful data for which to continue to examine the use of elasticity assessment devices for tissue quality assessment with the aim of giving haptic feedback to surgeons performing complex surgery. PMID:25384014

Dependence of Long Bone Flexural Properties on Bone Mineral Distribution

NASA Technical Reports Server (NTRS)

Katz, BethAnn; Cleek, Tammy M.; Whalen, Robert T.; Connolly, James P. (Technical Monitor)

1995-01-01

The objective of this study is to assess whether a non-invasive determination of long bone cross-sectional areal properties using bone densitometry accurately estimates true long bone flexural properties. In this study, section properties of two pairs of human female embalmed tibiae were compared using two methods: special analysis of bone densitometry data, and experimental determination of flexural regidities from bone surface strain measurements during controlled loading.

A System Approach to Navy Medical Education and Training. Appendix 15. Biotronics Technicians.

DTIC Science & Technology

1974-08-31

curricula based upon job analysis was implemented to a level of methodology determination. These methods and curriculum materials constituted a third...Therapy Technician 8495 Dermatology Technician 8496 Embalming Technician 8497 Medical Illustration Technician 8498 Medical Equipment Repair Technician... WET COMPRESSES/SOAKS/PACKS 24 ICONTROL BLEEDING BY PRESSURE DRESSING 25 1APPLY/CHANGE BANDAGES, E.G. ROLLER, TRIANGULAR, KURLEX GO TO RIGHT HAND PAGE

Functional aspects of cross-legged sitting with special attention to piriformis muscles and sacroiliac joints.

PubMed

Snijders, Chris J; Hermans, Paul F G; Kleinrensink, Gerrit Jan

2006-02-01

Transversely oriented pelvic muscles such as the internal abdominal oblique, transversus abdominis, piriformis and pelvic floor muscles may contribute to sacroiliac joint stability by pressing the sacrum between the hipbones. Surface electromyographic measurements showed that leg crossing lowers the activity of the internal oblique abdominal muscle significantly. This suggests that leg crossing is a substitute for abdominal muscle activity. No previous studies addressed piriformis muscle and related pelvic structures in cross-legged sitting. Angles of pelvis and femur were measured in healthy subjects in standing, normal sitting and cross-legged sitting, and were used to simulate these postures on embalmed pelvises and measure piriformis muscle elongation. Deformations of pelvic ring and iliolumbar ligament caused by piriformis muscle force were measured on embalmed pelvises. Cross-legged sitting resulted in a relative elongation of the piriformis muscle of 11.7% compared to normal sitting and even 21.4% compared to standing. Application of piriformis muscle force resulted in inward deformation of the pelvic ring and compression of the sacroiliac joints and the dorsal side of the pubic symphysis. Cross-legged sitting is common. We believe that it contributes to sacroiliac joint stability. This study demonstrates the influence of the piriformis muscle on sacroiliac joint compression. The elongation of the piriformis muscle bilaterally by crossing the legs may be functional in the build-up of active or passive tension between sacrum and femur.

Digital preservation of anatomical variation: 3D-modeling of embalmed and plastinated cadaveric specimens using uCT and MRI.

PubMed

Moore, Colin W; Wilson, Timothy D; Rice, Charles L

2017-01-01

Anatomy educators have an opportunity to teach anatomical variations as a part of medical and allied health curricula using both cadaveric and three-dimensional (3D) digital models of these specimens. Beyond published cadaveric case reports, anatomical variations identified during routine gross anatomy dissection can be powerful teaching tools and a medium to discuss several anatomical sub-disciplines from embryology to medical imaging. The purpose of this study is to document how cadaveric anatomical variation identified during routine dissection can be scanned using medical imaging techniques to create two-dimensional axial images and interactive 3D models for teaching and learning of anatomical variations. Three cadaveric specimens (2 formalin embalmed, 1 plastinated) depicting anatomical variations and an embryological malformation were scanned using magnetic resonance imaging (MRI) and micro-computed tomography (μCT) for visualization in cross-section and for creation of 3D volumetric models. Results provide educational options to enable visualization and facilitate learning of anatomical variations from cross-sectional scans. Furthermore, the variations can be highlighted, digitized, modeled and manipulated using 3D imaging software and viewed in the anatomy laboratory in conjunction with traditional anatomical dissection. This study provides an example for anatomy educators to teach and describe anatomical variations in the undergraduate medical curriculum. Copyright © 2016 Elsevier GmbH. All rights reserved.

The production of anatomical teaching resources using three-dimensional (3D) printing technology.

PubMed

McMenamin, Paul G; Quayle, Michelle R; McHenry, Colin R; Adams, Justin W

2014-01-01

The teaching of anatomy has consistently been the subject of societal controversy, especially in the context of employing cadaveric materials in professional medical and allied health professional training. The reduction in dissection-based teaching in medical and allied health professional training programs has been in part due to the financial considerations involved in maintaining bequest programs, accessing human cadavers and concerns with health and safety considerations for students and staff exposed to formalin-containing embalming fluids. This report details how additive manufacturing or three-dimensional (3D) printing allows the creation of reproductions of prosected human cadaver and other anatomical specimens that obviates many of the above issues. These 3D prints are high resolution, accurate color reproductions of prosections based on data acquired by surface scanning or CT imaging. The application of 3D printing to produce models of negative spaces, contrast CT radiographic data using segmentation software is illustrated. The accuracy of printed specimens is compared with original specimens. This alternative approach to producing anatomically accurate reproductions offers many advantages over plastination as it allows rapid production of multiple copies of any dissected specimen, at any size scale and should be suitable for any teaching facility in any country, thereby avoiding some of the cultural and ethical issues associated with cadaver specimens either in an embalmed or plastinated form. © 2014 American Association of Anatomists.

Clinical anatomy as practiced by ancient Egyptians.

PubMed

Loukas, Marios; Hanna, Michael; Alsaiegh, Nada; Shoja, Mohammadali M; Tubbs, R Shane

2011-05-01

Egypt is famously known for its Nile and pyramids, yet not many people know that Egypt made possible the origin of the anatomical sciences. Several ancient papyri guide us through the Egyptians' exploration of the human body and how they applied anatomical knowledge to clinical medicine to the best of their knowledge. It is through records, such as the Edwin Smith, Ebers, and Kahun papyri and other literature detailing the work of the Egyptian embalmers, physicians, and Greek anatomists, that we are able to take a glimpse into the evolution of the anatomical sciences from 3000 B.C. to 250 B.C. It is through the Egyptian embalmer that we were able to learn of some of the first interactions with human organs and their detailed observation. The Egyptian physician's knowledge, being transcribed into the Ebers and Edwin Smith papyri, enabled future physicians to seek reference to common ailments for diagnosing and treating a variety of conditions ranging from head injuries to procedures, such as trans-sphenoidal surgery. In Alexandria, Herophilus, and Erasistratus made substantial contributions to the anatomical sciences by beginning the practice of human dissection. For instance, Herophilus described the anatomy of the heart valves along with Erasistratus who demonstrated how blood was prevented from flowing retrograde under normal conditions. Hence, from various records, we are able to unravel how Egypt paved the road for study of the anatomical sciences. Copyright © 2011 Wiley-Liss, Inc.

THE USE OF FRY (EMBALMING FLUID AND PCP-LACED CIGARETTES OR MARIJUANA STICKS) AMONG CRACK COCAINE SMOKERS

PubMed Central

PETERS, RONALD J.; WILLIAMS, MARK; ROSS, MICHAEL W.; ATKINSON, JOHN; McCURDY, SHERLY A.

2010-01-01

Statistics show that the prevalence of crack cocaine use and embalming fluid and phencyclidine (PCP)-laced cigarettes or marijuana sticks, commonly referred to on the street as “fry” or “wet” is a problem; however, the relationship between these substances of abuse and concurrent polydrug use is unknown. In the present study, a cross-sectional survey was conducted among 426 African-American crack users in Houston, Texas, to investigate the difference between those who concurrently reported lifetime (defined as at least one usage of fry in life) fry use and those who stated they never used fry. The data were analyzed using chi-square and logistic regression analyses. Fry users were significantly more likely than non-users to not have a casual sex partner (92% users vs. 84% non-users, p ≤ 0.05) and were more likely to have been diagnosed with gonorrhea in the past 12 months (9% users vs. 2% non-users, p ≤ 0.05). In addition fry users had significantly higher odds of currently trading sex for drugs (OR = 2.30, p ≤ 0.05), marijuana use (OR = 12.11, p ≤ 0.05), and codeine (syrup) use (OR = 8.10, p ≤ 0.05). These findings are important in determining the “cultural novelties” relative to crack and fry use among younger African Americans. PMID:19157045

The Mechanics of Long Bone Fractures.

DTIC Science & Technology

1981-01-31

r = .99) between wet density and ultimate bending strength for 37 specimens of human femoral bone. Evans (1973) studied embalmed human tibial...Work 2 2.2 Methods 6 2.2.1 Torsional Loading 6 2.2.2 The Effects of Combined Loading 10 2.2.3 Cancellous Bone Effects 11 2.3 Results 11 2.3.1...PROPERTIES 21 3.1 Previous Work 22 3.2 Methods 26 3.2.1 Cross Sectional Property Software 26 3.2.2 CT Scanning Procedure 28 3.2.3 Linear Dependency of

Development of a Multiplex Single Base Extension Assay for Mitochondrial DNA Haplogroup Typing

PubMed Central

Nelson, Tahnee M.; Just, Rebecca S.; Loreille, Odile; Schanfield, Moses S.; Podini, Daniele

2007-01-01

Aim To provide a screening tool to reduce time and sample consumption when attempting mtDNA haplogroup typing. Methods A single base primer extension assay was developed to enable typing, in a single reaction, of twelve mtDNA haplogroup specific polymorphisms. For validation purposes a total of 147 samples were tested including 73 samples successfully haplogroup typed using mtDNA control region (CR) sequence data, 21 samples inconclusively haplogroup typed by CR data, 20 samples previously haplogroup typed using restriction fragment length polymorphism (RFLP) analysis, and 31 samples of known ancestral origin without previous haplogroup typing. Additionally, two highly degraded human bones embalmed and buried in the early 1950s were analyzed using the single nucleotide polymorphisms (SNP) multiplex. Results When the SNP multiplex was used to type the 96 previously CR sequenced specimens, an increase in haplogroup or macrohaplogroup assignment relative to conventional CR sequence analysis was observed. The single base extension assay was also successfully used to assign a haplogroup to decades-old, embalmed skeletal remains dating to World War II. Conclusion The SNP multiplex was successfully used to obtain haplogroup status of highly degraded human bones, and demonstrated the ability to eliminate possible contributors. The SNP multiplex provides a low-cost, high throughput method for typing of mtDNA haplogroups A, B, C, D, E, F, G, H, L1/L2, L3, M, and N that could be useful for screening purposes for human identification efforts and anthropological studies. PMID:17696300

The histopathologic reliability of tissue taken from cadavers within the gross anatomy laboratory.

PubMed

Rae, Guenevere; Newman, William P; McGoey, Robin; Donthamsetty, Supriya; Karpinski, Aryn C; Green, Jeffrey

2018-03-01

The purpose of this study was to examine the histopathologic reliability of embalmed cadaveric tissue taken from the gross anatomy laboratory. Tissue samples from hearts, livers, lungs, and kidneys were collected after the medical students' dissection course was completed. All of the cadavers were embalmed in a formalin-based fixative solution. The tissue was processed, embedded in paraffin, sectioned at six micrometers, and stained with H&E. The microscope slides were evaluated by a board certified pathologist to determine whether the cellular components of the tissues were preserved at a high enough quality to allow for histopathologic diagnosis. There was a statistically significant relationship between ratings and organ groups. Across all organs, there was a smaller proportion of "poor" ratings. The lung group had the highest percentage of "poor" ratings (23.1%). The heart group had the least "poor" ratings (0.0%). The largest percentage of "satisfactory" ratings were in the lung group (52.8%), and the heart group contained the highest percentage of "good" ratings (58.5%) The lung group had the lowest percentage of "good" ratings (24.2%). These results indicate that heart tissue is more reliable than lung, kidney, or liver tissue when utilizing tissue from the gross anatomy laboratory for research and/or educational purposes. This information advises educators and researchers about the quality and histopathologic reliability of tissue samples obtained from the gross anatomy laboratory. Anat Sci Educ 11: 207-214. © 2017 American Association of Anatomists. © 2017 American Association of Anatomists.

Using ATP-driven bioluminescence assay to monitor microbial safety in a contemporary human cadaver laboratory.

PubMed

Benninger, Brion; Maier, Thomas

2015-03-01

The objective of this study was to utilize a cost-effective method for assessing the levels of bacterial, yeast, and mold activity during a human dissection laboratory course. Nowadays, compliance with safety regulations is policed by institutions at higher standards than ever before. Fear of acquiring an unknown infection is one of the top concerns of professional healthcare students, and it provokes anti-laboratory anxiety. Human cadavers are not routinely tested for bacteria and viruses prior to embalming. Human anatomy dissecting rooms that house embalmed cadavers are normally cleaned after the dissected cadavers have been removed. There is no evidence that investigators have ever assessed bacterial and fungal activities using adenosine triphosphate (ATP)-driven bioluminescence assays. A literature search was conducted on texts, journals, and websites regarding bacterial, yeast, and mold activities in an active cadaver laboratory. Midway into a clinical anatomy course, ATP bioluminescence assays were used to swab various sites within the dissection room, including entrance and exiting door handles, water taps, cadaver tables, counter tops, imaging material, X-ray box switches, and the cadaver surfaces. The results demonstrated very low activities on cadaver tables, washing up areas, and exiting door handles. There was low activity on counter tops and X-ray boxes. There was medium activity on the entrance door handles. These findings suggest an inexpensive and accurate method for monitoring safety compliance and microbial activity. Students can feel confident and safe in the environment in which they work. © 2014 Wiley Periodicals, Inc.

Formaldehyde: a candidate toxic air contaminant. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frye, B.; Parker, T.

1988-03-01

Formaldehyde (HCHO) is a gas widely used in adhesives and resins, textiles, embalming fluids, fungicides, air fresheners, and cosmetics. It is directly emitted into the ambient outdoor air from vehicular and stationary sources, and is also produced in the atmosphere from other substances by photochemical smog processes. The International Agency for Research on Cancer (IARC) has determined that there is sufficient evidence for carcinogenicity of formaldehyde to animals, and limited evidence for carcinogenicity to humans. EPA classifies formaldehyde as a probable human carcinogen with a one in a million risk concentration of 0.08 ppb.

Anatomy of the interosseous region of the sacroiliac joint.

PubMed

Rosatelli, Alessandro L; Agur, Anne M; Chhaya, Sam

2006-04-01

Anatomical study of the interosseous region of the sacroiliac joint (SIJ) complex. To document and quantify the surface topography of the interosseous region of the SIJ. A review of the literature reveals that little consideration has been given to the interosseous region of the SIJ anatomically, biomechanically, and clinically. The interosseous region of 11 cadaveric specimens (9 formalin embalmed and 2 fresh frozen) were studied. Ten specimens were 55 years of age or older and 1 was 20 years old. To view the interosseous surfaces of the sacrum and ilium the specimens were either axially sectioned (1-cm slices) or disarticulated. One fresh-frozen and 6 embalmed specimens were disarticulated and the remainder axially sectioned. The topography (surface ridging and areas of ossification) of the interosseous region was documented in all specimens and in 2 specimens the surfaces were 3-dimensionally reconstructed using modeling and animation software (MAYA; Autodesk, Inc, San Rafael, CA). Surface characteristics of the SIJ complex observed in specimens 55 years of age or older included moderate to extensive ridging of the interosseous region of the sacrum and ilium in 100% of specimens and ossification of the central interosseous region of the sacroiliac (SI) ligament in 60% of specimens. Central region ossification of the interosseous SI ligament and the presence of ridges and depressions over the opposing interosseous surfaces of the sacrum and ilium are features common to specimens that are in or beyond their sixth decade. These findings further support the contention that there is little to no movement available at this joint in older individuals.

The Branching Pattern of the Brachiocephalic Trunk in the Donkey (Equus asinus).

PubMed

Akbari, G; Asadiahranjani, B; Goodarzi, N; Shokrollahi, S

2017-08-01

Donkeys are a member of the horse family (Equidae) and share a common ancestor. However, in morphological terms, donkeys and horses are regarded as two separate subgenus. Given variations in the branching pattern of the brachiocephalic trunk (BCT) in different species of animals and the use of donkeys in anatomy courses at colleges of veterinary medicine, we conducted this study in order to investigate the branching patterns of BCT and to describe detailed morphological information regarding donkeys. Seventeen mature donkeys were examined following euthanasia by exsanguination from the common carotid artery under general anaesthesia. Thirteen donkeys were embalmed and injected with coloured latex from BCT origin for better visualization of vessels. Four other donkeys were freshly studied without the embalming procedure. In all cases, the BCT was the only branch of the aortic arch and branched into the left subclavian (LSb) artery, the right costocervical trunk, the right subclavian (RSb) artery and the bicarotid trunk. The main branching pattern of the RSb was the costocervical trunk, the vertebral artery, the internal thoracic artery and the superficial cervical artery. The deep cervical artery branched from the costocervical trunk. The major branching pattern of the LSb was the vertebral artery, the internal thoracic artery and the superficial cervical artery. In donkeys, the external thoracic artery branches from the internal thoracic artery. Results obtained from this study indicate that BCT branching in donkeys has some similarities and differences as compared to that in horses and in the Caspian miniature horse. © 2017 Blackwell Verlag GmbH.

Analysis of metal artifact reduction tools for dental hardware in CT scans of the oral cavity: kVp, iterative reconstruction, dual-energy CT, metal artifact reduction software: does it make a difference?

PubMed

De Crop, An; Casselman, Jan; Van Hoof, Tom; Dierens, Melissa; Vereecke, Elke; Bossu, Nicolas; Pamplona, Jaime; D'Herde, Katharina; Thierens, Hubert; Bacher, Klaus

2015-08-01

Metal artifacts may negatively affect radiologic assessment in the oral cavity. The aim of this study was to evaluate different metal artifact reduction techniques for metal artifacts induced by dental hardware in CT scans of the oral cavity. Clinical image quality was assessed using a Thiel-embalmed cadaver. A Catphan phantom and a polymethylmethacrylate (PMMA) phantom were used to evaluate physical-technical image quality parameters such as artifact area, artifact index (AI), and contrast detail (IQFinv). Metal cylinders were inserted in each phantom to create metal artifacts. CT images of both phantoms and the Thiel-embalmed cadaver were acquired on a multislice CT scanner using 80, 100, 120, and 140 kVp; model-based iterative reconstruction (Veo); and synthesized monochromatic keV images with and without metal artifact reduction software (MARs). Four radiologists assessed the clinical image quality, using an image criteria score (ICS). Significant influence of increasing kVp and the use of Veo was found on clinical image quality (p = 0.007 and p = 0.014, respectively). Application of MARs resulted in a smaller artifact area (p < 0.05). However, MARs reconstructed images resulted in lower ICS. Of all investigated techniques, Veo shows to be most promising, with a significant improvement of both the clinical and physical-technical image quality without adversely affecting contrast detail. MARs reconstruction in CT images of the oral cavity to reduce dental hardware metallic artifacts is not sufficient and may even adversely influence the image quality.

Evaluation of automatic image quality assessment in chest CT - A human cadaver study.

PubMed

Franck, Caro; De Crop, An; De Roo, Bieke; Smeets, Peter; Vergauwen, Merel; Dewaele, Tom; Van Borsel, Mathias; Achten, Eric; Van Hoof, Tom; Bacher, Klaus

2017-04-01

The evaluation of clinical image quality (IQ) is important to optimize CT protocols and to keep patient doses as low as reasonably achievable. Considering the significant amount of effort needed for human observer studies, automatic IQ tools are a promising alternative. The purpose of this study was to evaluate automatic IQ assessment in chest CT using Thiel embalmed cadavers. Chest CT's of Thiel embalmed cadavers were acquired at different exposures. Clinical IQ was determined by performing a visual grading analysis. Physical-technical IQ (noise, contrast-to-noise and contrast-detail) was assessed in a Catphan phantom. Soft and sharp reconstructions were made with filtered back projection and two strengths of iterative reconstruction. In addition to the classical IQ metrics, an automatic algorithm was used to calculate image quality scores (IQs). To be able to compare datasets reconstructed with different kernels, the IQs values were normalized. Good correlations were found between IQs and the measured physical-technical image quality: noise (ρ=-1.00), contrast-to-noise (ρ=1.00) and contrast-detail (ρ=0.96). The correlation coefficients between IQs and the observed clinical image quality of soft and sharp reconstructions were 0.88 and 0.93, respectively. The automatic scoring algorithm is a promising tool for the evaluation of thoracic CT scans in daily clinical practice. It allows monitoring of the image quality of a chest protocol over time, without human intervention. Different reconstruction kernels can be compared after normalization of the IQs. Copyright © 2017 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Sandwich Hologram Interferometry For Determination Of Sacroiliac Joint Movements

NASA Astrophysics Data System (ADS)

Vukicevic, S.; Vinter, I.; Vukicevic, D.

1983-12-01

Investigations were carried out on embalmed and fresh specimens of human pelvisis with preserved lumbar spines, hip joints and all the ligaments. Specimens were tested under static vertical loading by pulsed laser interferometry. The deformations and behaviour of particular pelvic parts were interpreted by providing computer interferogram models. Results indicate rotation and tilting of the sacrum in the dorso-ventral direction and small but significant movements in the cranio-caudal direction. Sandwich holography proved to be the only applicable method when there is a combination of translation and tilt in the range of 200 μm to 1.5 mm.

A piezoelectric bone-conduction bending hearing actuator.

PubMed

Adamson, R B A; Bance, M; Brown, J A

2010-10-01

A prototype of a novel bone-conduction hearing actuator based on a piezoelectric bending actuator is presented. The device lies flat against the skull which would allow it to form the basis of a subcutaneous bone-anchored hearing aid. The actuator excites bending in bone through a local bending moment rather than the application of a point force as with conventional bone-anchored hearing aids. Through measurements of the cochlear velocity created by the actuator in embalmed human heads, the device is shown to exhibit high efficiency, making it a possible alternative to present-day electromagnetic bone-vibration actuators.

A comparison of direct versus indirect laryngoscopic visualization during endotracheal intubation of lightly embalmed cadavers utilizing the GlideScope®, Storz Medi Pack Mobile Imaging System™ and the New Storz CMAC™ videolaryngoscope.

PubMed

Boedeker, Ben H; Nicholsal, Thomas A; Carpenter, Jennifer; Singh, Leighton; Bernhagen, Mary A; Murray, W Bosseau; Wadman, Michael C

2011-01-01

Studies indicate that the skills needed to use video laryngoscope systems are easily learned by healthcare providers. This study compared several video laryngoscopic (VL) systems and a direct laryngoscope (DL) view when used by medical residents practicing intubation on cadavers. The video devices used included the Storz Medi Pack Mobile Imaging System™, the Storz CMAC® VL System and the GlideScope®. After Institutional Review Board (IRB) approval, University of Nebraska Medical Center, Department of Emergency Medicine (UNMC EM) residents were recruited and given a brief pre-study informational period. The cadavers were lightly embalmed. The study subjects were asked to perform intubations on two cadavers using both DL and VL while using the three different VL systems. Procedural data was recorded for each attempt and pre and post experience perceptions were collected. N=14. All subjects reported their varied previous intubation experience. The average airway score using DL: for the Storz VL was 1.54 (SD = 0.576) and for the C-MAC was 1.46 (SD = 0.637). Success in intubation of the standard airway using DL was 93% versus a 100% success rate when intubating with indirect VL visualization. Based on our data, we believe that the incorporation of VL into cadaver airway management training provided an improved learning environment for the study residents. In our study, the resident subjects were 93% successful with DL intubation even though 50% had less than 30 intubations. As well, there was a 100% success rate when intubating with indirect VL visualization. In conclusion, the researchers believe this cadaver model incorporated with VL is a powerful tool which may help improve the overall learning curve for orotracheal intubation. 2011.

Rediscovery of the type series of the Sacred Shrew, Sorex religiosus I. Geoffroy Saint-Hilaire, 1826, with additional notes on mummified shrews of ancient Egypt (Mammalia: Soricidae).

PubMed

Woodman, Neal; Koch, Claudia; Hutterer, Rainer

2017-10-30

In 1826, Isidore Geoffroy Saint-Hilaire described the Sacred Shrew, Sorex religiosus [= Crocidura religiosa] from a series of 22 embalmed individuals that comprised a portion of the Italian archeologist Joseph Passalacqua's collection of Egyptian antiquities from an ancient necropolis near Thebes, central Egypt. Living members of the species were not discovered until the beginning of the 20th century and are currently restricted to the Nile Delta region, well north of the type locality. In 1968, the type series of S. religiosus was reported lost, and in 1978, a neotype was designated from among a small collection of modern specimens in the Natural History Museum, London. Our investigations have revealed, however, that the type series is still extant. Most of the specimens used by I. Geoffroy Saint-Hilaire to describe S. religiosus still form part of the Passalacqua Collection in the Ägyptisches Museum, Berlin, Germany. We summarize the taxonomic history of S. religiosus, review the history of the Passalacqua collection, and explain why the type series was thought to have been lost. We designate an appropriate lectotype from among the original syntypes of S. religiosus in the Ägyptisches Museum. Our examination of the shrew mummies in the Passalacqua collection also yielded a species previously unrecorded from either ancient or modern Egypt: Crocidura pasha Dollman, 1915. Its presence increases the number of soricid species embalmed in ancient Egypt to seven and provides additional evidence for a more diverse Egyptian shrew fauna in the archeological past. Finally, we provide details that will assist in better understanding the variety of mummification procedures used to preserve animals in ancient Egypt.

The advantage of CT scans and 3D visualizations in the analysis of three child mummies from the Graeco-Roman Period.

PubMed

Villa, Chiara; Davey, Janet; Craig, Pamela J G; Drummer, Olaf H; Lynnerup, Niels

2015-01-01

Three child mummies from the Graeco-Roman Period (332 BCE - c. 395 CE) were examined using CT scans and 3D visualizations generated with Vitrea 2 and MIMICS graphic workstations with the aim of comparing the results with previous X-ray examinations performed by Dawson and Gray in 1968. Although the previous analyses reported that the children had been excerebrated and eviscerated, no evidence of incisions or breaches of the cranial cavity were found; 3D visualizations were generated showing the brain and the internal organs to be in situ. A larger number of skeletal post-mortem damages were identified, such as dislocation of mandible, ribs, and vertebrae, probably suffered at the time of embalming procedure. Different radio-opaque granular particles were observed throughout bodies (internally and externally) and could be explained as presence of natron, used as external desiccating agent by the embalmers, or as adipocerous alteration, a natural alteration of body fat. Age-at-death was estimated using the 3D visualization of the teeth, the state of fusion of the vertebrae and the presence of the secondary centers of the long bones: two mummies died at the age of 4 years ± 12 months, the third one at the age of 6 years ± 24 months. Hyperdontia or polydontia, a dental anomaly, could also be identified in one child using 3D visualizations of the teeth: two supernumerary teeth were found behind the maxillary permanent central incisors which had not been noticed in the Dawson and Gray's X-ray analysis. In conclusion, CT-scan investigations and especially 3D visualizations are important tools in the non-invasive analysis of the mummies and, in this case, provided revised and additional information compared to the only X-ray examination.

An anatomical, histopathological, and molecular biological function study of the fascias posterior to the interperitoneal colon and its associated mesocolon: their relevance to colonic surgery

PubMed Central

Gao, Zhidong; Ye, Yingjiang; Zhang, Weiguang; Shen, Danhua; Zhong, Yanfeng; Jiang, Kewei; Yang, Xiaodong; Yin, Mujun; Liang, Bin; Tian, Long; Wang, Shan

2013-01-01

The study aim was to explore the anatomy, histopathology, and molecular biological function of the fascias posterior to the interperitoneal colon and its mesocolon to provide information for improving complete mesocolic excision. To accomplish this aim, we performed intraoperative observations in 60 interperitoneal colon-cancer patients accepted for complete mesocolic excision and conducted local anatomy observations for five embalmed cadavers. An additional two embalmed child cadaver specimens were studied with large slices and paraffin sections. Ten of the 60 patients were examined with a lymph node tracer technique in vivo, while fresh specimens from these patients were assessed by histopathological examination and transwell cell migration assays in vitro. The anatomical and histopathological findings showed that the fascias posterior to the interperitoneal colon and its associated mesocolon were composed of two independent layers: the visceral and parietal fascias. These two fascias were primarily composed of collagen fibers, with the parietal fascia containing a small amount of muscle fiber. The in vivo test showed that the visceral fascia surrounded the colon and its associated mesocolon, including vessels and lymphatics, and that it had no lymphatic flow through it into the rear tissues. Moreover, the in vitro assays showed the visceral fascia was able to block tumor cell migration. Although many surgical scholars have known of the existence of fascia tissue posterior to the intraperitoneal colon, the detailed structure has been ignored and been unclear. As shown by our findings, the visceral and parietal fascias are truly formed structures that have not been previously reported. A thorough understanding of fascial structures and the function of the visceral fascia barrier in blocking tumor cells will facilitate surgeons when performing high-quality complete mesocolic excision procedures. PMID:23721400

Contrast agent comparison for three-dimensional micro-CT angiography: A cadaveric study.

PubMed

Kingston, Mitchell J; Perriman, Diana M; Neeman, Teresa; Smith, Paul N; Webb, Alexandra L

2016-07-01

Barium sulfate and lead oxide contrast media are frequently used for cadaver-based angiography studies. These contrast media have not previously been compared to determine which is optimal for the visualisation and measurement of blood vessels. In this study, the lower limb vessels of 16 embalmed Wistar rats, and four sets of cannulae of known diameter, were injected with one of three different contrast agents (barium sulfate and resin, barium sulfate and gelatin, and lead oxide combined with milk powder). All were then scanned using micro-computed tomography (CT) angiography and 3-D reconstructions generated. The number of branching generations of the rat lower limb vessels were counted and compared between the contrast agents using ANOVA. The diameter of the contrast-filled cannulae, were measured and used to calculate the accuracy of the measurements by comparing the bias and variance of the estimates. Intra- and inter-observer reliability were calculated using intra-class correlation coefficients. There was no significant difference (mean difference [MD] 0.05; MD 95% confidence interval [CI] -0.83 to 0.93) between the number of branching generations for barium sulfate-resin and lead oxide-milk powder. Barium sulfate-resin demonstrated less bias and less variance of the estimates (MD 0.03; standard deviation [SD] 1.96 mm) compared to lead oxide-milk powder (MD 0.11; SD 1.96 mm) for measurements of contrast-filled cannulae scanned at high resolution. Barium sulfate-resin proved to be more accurate than lead oxide-milk powder for high resolution micro-CT scans and is preferred due to its non-toxicity. This technique could be applied to any embalmed specimen model. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Ureterorenoscopy training on cadavers embalmed by Thiel’s method: simulation or a further step towards reality? Initial report

PubMed Central

Tang, Benjie; Golabek, Tomasz; Wiatr, Tomasz; Ross, Gillian; Duncan, Alan; Howie, Duncan; Tait, Iain; Chłosta, Piotr; Kata, Sławomir G.

2017-01-01

Introduction The technique of ureterorenoscopy has a significant learning curve. Cadavers embalmed by the Thiel method have been successfully used for simulation training in a number of surgical specialties. Here we present our experience of the first use of Thiel cadavers in a formal ureteroscopy training course. Material and methods The inaugural ‘Masterclass in Flexible Ureterorenoscopy’ was run with participants performing ureterorenoscopy on three Thiel cadavers under expert supervision. A qualitative questionnaire was delivered to the participants and faculty. Assessed domains were tissue characteristics of the cadaveric urinary tract, anatomical features and procedural aspects. A five-point Likert score was used to assess responses. Data regarding participant experience in endourology were also collected. Results 8 questionnaires were collected. All participants completed cadaveric ureterorenoscopy. Three-quarters reported the overall quality of tissue in the cadaveric bladder, ureters and pelvicalyceal system as high or excellent. Half reported the cadaveric bladder as being softer than in a live patient, whilst five out of eight thought that the cadaveric ureter was softer and more prone to trauma. Seven out of eight were satisfied with the overall quality of the cadaveric model. The quality of vision and irrigation in the upper urinary tracts was reported as high. Conclusions Thiel cadavers have been shown to have excellent tissue characteristics, as well as being durable and reusable. We have described the first use of Thiel cadavers in a designated ureterorenoscopy course, with high levels of delegate satisfaction. Further work is required to develop the role of Thiel cadavers as part of an integrated, modular urology training. PMID:28461994

[Application of polyguanidine solution for fixation of biological and anatomical specimens].

PubMed

Anichkov, N M; Danilova, I A; Riabinin, I A; Kipenko, A V

2010-01-01

A new method for fixation of biological material is described, and its effectiveness is compared to that one of formalin fixation. As an embalming agent, polyhexamethylenguanidine (PHMG) hydrochloride was used. Using the proposed method of fixation, the anatomical and histological preparations of human organs and of chick embryos at developmental 12 days, were produced. The anatomical preparations obtained show the appearance, similar to that of the recently removed organs. Histological preparations were free from significant distortions of the microscopic characteristics of the specimens, which are typical to the material fixed with formalin. The results of the study suggest the possibility of PHMG application in the morphological studies.

Biomechanical measurements of stiffness and strength for five types of whole human and artificial humeri.

PubMed

Aziz, Mina S R; Nicayenzi, Bruce; Crookshank, Meghan C; Bougherara, Habiba; Schemitsch, Emil H; Zdero, Radovan

2014-05-01

The human humerus is the third largest longbone and experiences 2-3% of all fractures. Yet, almost no data exist on its intact biomechanical properties, thus preventing researchers from obtaining a full understanding of humerus behavior during injury and after being repaired with fracture plates and nails. The aim of this experimental study was to compare the biomechanical stiffness and strength of "gold standard" fresh-frozen humeri to a variety of humerus models. A series of five types of intact whole humeri were obtained: human fresh-frozen (n = 19); human embalmed (n = 18); human dried (n = 15); artificial "normal" (n = 12); and artificial "osteoporotic" (n = 12). Humeri were tested under "real world" clinical loading modes for shear stiffness, torsional stiffness, cantilever bending stiffness, and cantilever bending strength. After removing geometric effects, fresh-frozen results were 585.8 ± 181.5 N/mm2 (normalized shear stiffness); 3.1 ± 1.1 N/(mm2 deg) (normalized torsional stiffness); 850.8 ± 347.9 N/mm2 (normalized cantilever stiffness); and 8.3 ± 2.7 N/mm2 (normalized cantilever strength). Compared to fresh-frozen values, statistical equivalence (p ≥ 0.05) was obtained for all four test modes (embalmed humeri), 1 of 4 test modes (dried humeri), 1 of 4 test modes (artificial "normal" humeri), and 1 of 4 test modes (artificial "osteoporotic" humeri). Age and bone mineral density versus experimental results had Pearson linear correlations ranging from R = -0.57 to 0.80. About 77% of human humeri failed via a transverse or oblique distal shaft fracture, whilst 88% of artificial humeri failed with a mixed transverse + oblique fracture. To date, this is the most comprehensive study on the biomechanics of intact human and artificial humeri and can assist researchers to choose an alternate humerus model that can substitute for fresh-frozen humeri.

Interdisciplinary Study of Egyptian Mummies from the Pushkin State Museum of Fine Arts Collection at the National Research Centre ``Kurchatov Institute''

NASA Astrophysics Data System (ADS)

Yatsishina, E. B.; Kovalchuk, M. V.; Loshak, M. D.; Vasilyev, S. V.; Vasilieva, O. A.; Dyuzheva, O. P.; Pojidaev, V. M.; Ushakov, V. L.

2018-05-01

Nine ancient Egyptian mummies (dated preliminarily to the period from the 1st mill. BCE to the first centuries CE) from the collection of the State Pushkin Museum of Fine Arts have been studied at the National Research Centre "Kurchatov Institute" (NRC KI) on the base of the complex of NBICS technologies. Tomographic scanning is performed using a magneto-resonance tomograph (3 T) and a hybrid positron emission tomography/computed tomography (PET-CT) scanner. Three-dimensional reconstructions of mummies and their anthropological measurements are carried out. Some medical conclusions are drawn based on the tomographic data. In addition, the embalming composition and tissue of one of the mummies are preliminarily analyzed.

Implantation of radio frequency identification device (RFID) microchip in disaster victim identification (DVI).

PubMed

Meyer, Harald J; Chansue, Nantarika; Monticelli, Fabio

2006-03-10

The tsunami catastrophe of December 2004 left more than 200,000 dead. Disaster victim identification (DVI) teams were presented with the unprecedented challenge of identifying thousands of mostly markedly putrefied and partially skeletised bodies. To this end, an adequate body tagging method is essential. Conventional body bag tagging in terms of writing on body bags and placing of tags inside body bags proved unsatisfactory and problem prone due to consequences of cold storage, formalin (formaldehyde) embalming and body numbers inside storage facilities. The placement of radio frequency identification device (RFID) microchips inside victim bodies provided a practical solution to problems of body tagging and attribution in the DVI setting encountered by the Austrian DVI team in Thailand in early 2005.

The idea of the library in the twenty-first century*

PubMed Central

Matheson, Nina W.

2012-01-01

The fundamental idea of the library must change. The nineteenth-century idea of the library as the embalming of dead genius and the twentieth-century idea of the library as the repository for secondhand knowledge must give way to the idea of the library as the owner and the librarian as the manager of first-hand knowledge. In the coming era of knowledge capitalism, those individuals and organizations will flourish who are able to apply knowledge to create knowledge and to organize it to produce knowledge. The roles of present-day librarians and libraries will begin to differentiate sharply over the next decade. Some must seize the opportunity to participate in the transformation of libraries into online knowledge servers. PMID:23509431

X-ray microfluorescence analysis of pigments in decorative paintings from the sarcophagus cartonnage of an Egyptian mummy

NASA Astrophysics Data System (ADS)

Calza, C.; Anjos, M. J.; de Souza, S. M. F. Mendonça; Brancaglion, A.; Lopes, R. T.

2007-10-01

This work characterized the elemental composition of the pigments used in decorative paintings from the sarcophagus cartonnage fragments of an Egyptian mummy, using μXRF with Synchrotron Radiation. This female mummy (n.158) is considered one of the most important pieces of the National Museum (Rio de Janeiro, Brazil) because of its unconventional embalming with legs and arms swathed separately. The measurements were performed at the XRF beamline D09B of the Brazilian Synchrotron Light Laboratory (LNLS), using white beam and a Si(Li) detector with resolution of 165 eV at 5.9 keV. The elements found in the samples were: Si, S, Cl, K, Ca, Ti, Cr, Mn, Fe, Ni, Cu, Zn, As, Sr, Hg and Pb.

Change and Innovation in the Funeral Industry.

PubMed

Beard, Virginia R; Burger, William C

2017-05-01

The "modern" or traditional funeral, as it is known in the funeral industry today, that includes embalming, casket, service, and burial in a cemetery, emerged as a result of four forces in American society: the Industrial Revolution, the Civil War, the emergence of a genteel code of conduct as a result of increased wealth in our society, and changing cultural views toward death. While the traditional funeral ritual remains the most popular funeral selection in the United States today, the industry is experiencing changes that are reshaping the death rituals and methods of body disposal. A meta-analysis of relevant news articles from 1987 through 2014 finds that these changes are occurring as a result of two general motivational themes: a Business-Related Motivation and a Consumer-Related Motivation, each with corresponding subthemes.

Meningeal Preservation in a Child Mummy from Ancient Egypt.

PubMed

Isidro, Albert; Herrerin, Jesús

2017-04-01

Over many centuries, the ancient Egyptians developed a method of preserving bodies so they would remain lifelike. Mummification of bodies was originally a natural process in Egypt, and it evolved to a sophisticated embalming system to preserve the individual for the afterlife. Afterwards, mummification continued to be practiced in Egypt for some 3000 years, lasting until the end of the Christian era. In the Coptic necropolis of Qarara (Middle Egypt), 17 mummified individuals were studied during the 2012 campaign. One of them was a 6-8 old-year male child with a damaged skull that allowed us to see the meningeal structures covering the entire cranial vault, in absence of brain remains. This finding in a child mummy is exceptional, as reflected in the specialized literature. Copyright © 2017 Elsevier Inc. All rights reserved.

From first to latest imaging technology: Revisiting the first mummy investigated with X-ray in 1896 by using dual-source computed tomography.

PubMed

Zesch, Stephanie; Panzer, Stephanie; Rosendahl, Wilfried; Nance, John W; Schönberg, Stefan O; Henzler, Thomas

2016-01-01

The aim of this study was to systematically reinvestigate the first human mummy that was ever analyzed with X-ray imaging in 1896, using dual-source computed tomography (DSCT) in order to compare the earliest and latest imaging technologies, to estimate preservation, age at death, sex, anatomical variants, paleopathological findings, mummification, embalming and wrapping of the child mummy from ancient Egypt. Radiocarbon dating was used to determine the mummy's age and to specify the child's living period in the Egyptian chronology. The ancient Egyptian child mummy is kept in the Senckenberg Museum of Natural History in Frankfurt am Main, Germany. An accelerator mass spectrometer (MICADAS) was used for radiocarbon dating. DSCT was performed using a 2 × 64 slice dual-source CT system (Siemens Healthineers, Forchheim, Germany). A thorough visual examination of the mummy, a systematic radiological evaluation of the DICOM datasets, and established methods in physical anthropology were applied to assess the bio-anthropological data and the post mortem treatment of the body. Radiocarbon dating yielded a calibrated age between 378 and 235 cal BC (95.4% confidence interval), corresponding with the beginning of the Ptolemaic period. The mummy was a male who was four to five years old at the time of death. Remnants of the brain and inner organs were preserved by the embalmers, which is regularly observed in ancient Egyptian child mummies. Skin tissue, inner organs, tendons and/or musculature, cartilage, nerves and vasculature could be identified on the DSCT dataset. The dental health of the child was excellent. Anatomical variants and pathological defects included a congenital Pectus excavatum deformity, hepatomegaly, Harris lines, and longitudinal clefts in the ventral cortices of both femora. Our results highlight the enormous progress achieved form earliest to latest imaging technology for advanced mummy research using the first human mummy investigated with X-ray. With the application of DSCT, detailed knowledge regarding age at death, sex, diseases, death, and mummification of a child from Ptolemaic Egypt are revealed while considering the temporary rites of body treatment and burial for children.

Effects of three different preservation methods on the mechanical properties of human and bovine cortical bone.

PubMed

Unger, Stefan; Stefan, Unger; Blauth, Michael; Michael, Blauth; Schmoelz, Werner; Werner, Schmoelz

2010-12-01

In the development of new strategies for fracture fixation, new methods have to be tested biomechanically under in vitro conditions before clinical trials can be performed. The gold standard for laboratory evaluations is fresh-frozen specimen. As the availability of fresh-frozen specimens is limited and since their use bears infectious risks, specimens treated with various chemical embalming fluids are also used. These preservation methods may alter the mechanical properties of the specimens used. Therefore, the aims of the present study were to determine the effects of three different preservation methods (formalin fixation (FO), Thiel-fixation (TH), and alcohol-glycerine fixation (AG)) on the elastic and postyield mechanical properties of cortical bone and to compare these properties to those of fresh-frozen (FF) specimens. Cylindrical cortical specimens (diameter 3mm, length 60 mm) were obtained from human femurs (n=48) and bovine tibiae (n=40). Before specimen immersion in different fixation fluids, bone mineral density (BMD) as well as the initial Young's modulus was determined. The Young's modulus was determined in a nondestructive bending test, and measurements were repeated after 6 months of immersion in fixative solution. Subsequent to the nondestructive test, a destructive 3-point bending test was conducted to assess the postyield and fracture properties. The BMD as well as the initial Young's modulus showed no significant differences between the four test groups. After 6 months in fixative solution, the Young's modulus was significantly lowered in human Thiel specimens and only showed minor changes in formalin- and alcohol-glycerine-treated specimens. The plastic energy absorption of human and bovine specimens was altered significantly. Formalin as well as alcohol-glycerine fixation yielded a significant decrease in plastic energy absorption, whereas Thiel fixation significantly increased the plastic energy absorption. Because of the significantly altered plastic mechanical properties of cortical bone, the use fresh-frozen bone specimens is recommended in biomechanical studies investigating failure loads of orthopaedic implants. The use of embalmed specimens should be restricted to pilot tests. Copyright © 2010 Elsevier Inc. All rights reserved.

The heart of Blessed Anne-Madeleine Remuzat: a biomedical approach of "miraculous" heart conservation.

PubMed

Charlier, Philippe; Huynh-Charlier, Isabelle; Poupon, Joël; Fox, Carles Lalueza; Keyser, Christine; Mougniot, Christian; Popescu, Spéranta-Maria; Brun, Luc; Pietri, Sylvia; Thévenard, Frédéric; Laquay, Laëtitia; Hurel, Agathe; Ellul, Jean-Pierre; Hervé, Christian

2014-01-01

We present here the results of our inter-disciplinary examination of the mummified heart of Blessed Anne-Madeleine Remuzat (1696-1730). This organ has been examined in the context of a canonization process. This analysis is related to important aspects of the early history of anatomy in Europe, that of "Holy autopsies", and to the relationship between anatomical investigations, Catholic theology, and religious/medical customs. According to anatomical, genetic, toxicological, and palynological analyses, it has been shown that this organ has not been naturally ("miraculously") conserved but embalmed using myrtle, honey, and lime. Moreover, a right ventricle dilatation has been diagnosed, that may represent a post-tuberculosis condition and may have played a role in the cause of death of this religious figure. Copyright © 2014 Elsevier Inc. All rights reserved.

Macroscopic anatomy of the reproductive tract of the reproductively quiescent female emu (Dromaius novaehollandiae).

PubMed

Reed, Robert B; Cope, Lee A; Blackford, James T

2011-04-01

Three reproductively quiescent female emus (Dromaius novaehollandiae) were embalmed with 10% formalin solution. The reproductive tract was dissected and described. The reproductive tract consists of an ovary and oviduct situated on the left side of the abdominal cavity. The left ovary is dark brown to black in colour with follicles covering the ventral surface. The ovary is located medial to the spleen and closely associated with the ventral surface of the cranial and middle lobes of the left kidney. The oviduct is a relatively straight tube that extends from the level of the cranial extent of the left ilium to the caudal border of the left pubic bone. The oviduct is grossly divided into the infundibulum, magnum, isthmus, uterus and vagina using variations in the mucosal fold pattern. © 2010 Blackwell Verlag GmbH.

[Contribution of MRI to the preoperative evaluation of rotator cuff tears].

PubMed

Gagey, N; Desmoineaux, P; Gagey, O; Idy-Peretti, I; Mazas, F

1991-01-01

The authors report a series of 38 patients who had been examined by MRI and then operated for a rotator cuff syndrome. The correlation between the description of the cuff lesions after MRI and the surgical observations were excellent for 37 patients. In one case MRI showed a false image of tear of the supra spinatus m. on its anterior edge. This was due to a bad knowledge of the anatomy of the muscle and tendon and to a poor orientation of the frontal cut plane. This study was completed with MRI and anatomic study of 12 non embalmed cadaveric shoulders. The results showed that MRI was very sensitive (0.93) and specific (0.94) for the diagnosis of rotator cuff tears. MRI allowed also to show partial tears of the tendons of the rotator cuff. The authors propose a MRI classification of cuff lesions which permits to establish a good surgical planning.

[Practical endoscopic methods education in Educational Centre for Anatomy and Endoscopy of Department of Anatomy, Third Faculty Of Medicine, Charles University in Prague--is there room for further progress?].

PubMed

Doubková, A; Smrzová, T

2008-01-01

Unique multimedial centre for education in endoscopic surgery and miniinvasive surgery was established at the Department of Anatomy of Third Medical Faculty of Charles University in Prague during 2000 to 2005. A new fixation method was introduced to enable the repeated usage of cadavers for imitation of surgical interventions. One operating theatre was equipped with an audio-video network and a wireless connection to internet together with a graphic studio for the production of our own educational materials. The Centre's web side enables e-learning study. At the dissection courses for medical students arthroscopies of small and large joints, laparoscopies, bronchoscopies and gastroscopies are demonstrated. Also postgradual education courses for physicians are organised. They bring a great opportunity to gain experience in endoscopic surgery and miniinvasive surgery on specifically embalmed anatomical material.

Acromegalic gigantism, physicians and body snatching. Past or present?

PubMed

de Herder, Wouter W

2012-09-01

The skeletons of 2 famous acromegalic giants: Charles Byrne (1761-1783) and Henri Cot = Joseph Dusorc (1883-1912) and the embalmed body of the famous acromegalic giant Édouard Beaupré (1881-1904) all ended up in the medical collections of museums despite the fact that these patients had never donated or even refused to donate their corpses, nor had their relatives given permission. The corpse of the acromegalic giant John Aasen (1890-1938) was voluntarily donated to a physician annex collector of trivia from acromegalic giants. The autopsy on the acromegalic giant John Turner (1874-1911) was performed during his funeral ceremony without the relatives being informed. Only recently, the acromegalic giant Alexander Sizonenko (1959-2012) was made a financial offer during his life in exchange for his body after his death. The case-histories of these 6 patients and also the circumstances that led to the (in-) voluntary donation of their bodies are reviewed.

A comparison of surgical exposures for posterolateral osteochondral lesions of the talar dome.

PubMed

Mayne, Alistair I W; Lawton, Robert; Reidy, Michael J; Harrold, Fraser; Chami, George

2018-04-01

Perpendicular access to the posterolateral talar dome for the management of osteochondral defects is difficult. We examined exposure available from each of four surgical approaches. Four surgical approaches were performed on 9 Thiel-embalmed cadavers: anterolateral approach with arthrotomy; anterolateral approach with anterior talo-fibular ligament (ATFL) release; anterolateral approach with antero-lateral tibial osteotomy; and anterolateral approach with lateral malleolus osteotomy. The furthest distance posteriorly allowing perpendicular access with a 2mm k-wire was measured. An anterolateral approach with arthrotomy provided a mean exposure of the anterior third of the lateral talar dome. A lateral malleolus osteotomy provided superior exposure (81.5% vs 58.8%) compared to an anterolateral tibial osteotomy. Only the anterior half of the lateral border of the talar dome could be accessed with an anterolateral approach without osteotomy. A fibular osteotomy provided best exposure to the posterolateral aspect of the talar dome. Copyright © 2016 European Foot and Ankle Society. Published by Elsevier Ltd. All rights reserved.

A reliable technique for ultrasound-guided perineural injection in ulnar neuropathy at the elbow.

PubMed

Hamscha, Ulrike M; Tinhofer, Ines; Heber, Stefan; Grisold, Wolfgang; Weninger, Wolfgang J; Meng, Stefan

2017-08-01

Ulnar neuropathy at the elbow (UNE) is a common peripheral compression neuropathy and, in most cases, occurs at 2 sites, the retroepicondylar groove or the cubital tunnel. With regard to a potential therapeutic approach with perineural corticosteroid injection, the aim of this study was to evaluate the distribution of injection fluid applied at a standard site. We performed ultrasound-guided (US-guided) perineural injections to the ulnar nerve halfway between the olecranon and the medial epicondyle in 21 upper limbs from 11 non-embalmed cadavers. In anatomic dissection we investigated the spread of injected ink. Ink was successfully injected into the perineural sheath of the ulnar nerve in all 21 cases (cubital tunnel: 21 of 21; retroepicondylar groove: 19 of 21). US-guided injection between the olecranon and the medial epicondyle is a feasible and safe method to reach the most common sites of ulnar nerve entrapment. Muscle Nerve 56: 237-241, 2017. © 2016 Wiley Periodicals, Inc.

The peroneus quartus muscle: clinical correlation with evolutionary importance.

PubMed

Athavale, Sunita Arvind; Gupta, Vanita; Kotgirwar, Sheetal; Singh, Vikrant

2012-06-01

The peroneus quartus (PQ) is an accessory muscle of the peroneal/lateral compartment of the leg. The muscle has often been implicated as a cause of pain in the lateral ankle region, and subluxation or attrition of the peroneal tendons. The present study was aimed at observing the prevalence and morphology of this muscle in human cadavers. Ninety-two embalmed lower limbs were dissected for this study. The PQ muscle was found in 21% of the limbs. In all these limbs it originated from the lower part of the lateral surface of the fibula, the undersurface of peroneus brevis and the posterior intermuscular septum. In the majority of limbs, insertion was on the retrotrochlear eminence of the calcaneus. Taking into account the possibility of this muscle being a cause of lateral ankle pathology, the present study attempts to correlate the findings with the anatomy of the surrounding region. The frequent occurrence of this muscle in humans is suggestive of a progressive evolutionary change to evert the foot in order to assume a bipedal gait.

Anatomy of the subcutaneous tissue of the trunk and lower extremity.

PubMed

Markman, B; Barton, F E

1987-08-01

Dissections on 8 fresh and 10 embalmed cadavers were used to determine the anatomy of the subcutaneous adipose tissue in the trunk and extremities. These dissections, along with CT scans, confirmed Gray's original description of the subcutaneous tissue consisting of a superficial and deep adipose layer. The superficial adipose layer is contained within organized, compact fascial septa. The deep adipose layer demonstrated regional variations with respect to its fascial framework, but was contained within a relatively loose, less organized, and more widely spaced fascial septa. We observed that the adipose layers are partitioned by a discrete subcutaneous fascia which fuses with the underlying muscle fascia at particular anatomic locations. The deep layer is thus contained by the subcutaneous fascia above and the muscle fascia below to form what we termed the deep adipose compartments. The deep adipose compartments contributed significantly to overall adipose thickness, are bilateral, and are found in the abdomen and paralumbar and gluteal-thigh regions.

Variations in the nerves of the thumb and index finger.

PubMed

Wallace, W A; Coupland, R E

1975-11-01

The digital nerves to the thumb and index finger have been studied by dissecting twenty-five embalmed upper limbs. The palmar digital nerves to the thumb were constant in position and course, with a short lateral cutaneous branch from the radial palmar digital nerve in 30 per cent of cases. The palmar digital nerves to the index finger had a variable pattern, the commonest arrangement, well described in Gray's Anatomy, occurring in 74 per cent of cases. The variations and their frequency are described. By examining histological cross-sections of the index finger it was found that of about 5,000 endoneurial tubes entering the finger, 60 per cent passed beyond the distal digital crease to supply the pulp and nail bed. The depth of the palmar digital nerves was about 3 millimetres, but less at the digital creases, and their diameter lay between 1 and 1.5 millimetres as far as the distal digital crease. Clinical applications of the findings are discussed.

Innovative ventilation system for animal anatomy laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lacey, D.R.; Smith, D.C.

1997-04-01

A unique ventilation system was designed and built to reduce formaldehyde fumes in the large animal anatomy lab at the Vet Medical Center at Cornell University. The laboratory includes four rooms totaling 5,500 ft{sup 2}. The main room has 2,300 ft{sup 2} and houses the laboratory where up to 60 students dissect as many as 12 horses at a time. Other rooms are a cold storage locker, an animal preparation room and a smaller lab for specialized instruction. The large animal anatomy laboratory has a history of air quality complaints despite a fairly high ventilation rate of over 10 airmore » changes/hour. The horses are embalmed, creating a voluminous source of formaldehyde and phenol vapors. Budget constraints and increasingly stringent exposure limits for formaldehyde presented a great challenge to design a ventilation system that yields acceptable air quality. The design solution included two innovative elements: air-to-air heat recovery, and focused ventilation.« less

Mechanical properties of cancellous bone in the human mandibular condyle are anisotropic.

PubMed

Giesen, E B; Ding, M; Dalstra, M; van Eijden, T M

2001-06-01

The objective of the present study was (1) to test the hypothesis that the elastic and failure properties of the cancellous bone of the mandibular condyle depend on the loading direction, and (2) to relate these properties to bone density parameters. Uniaxial compression tests were performed on cylindrical specimens (n=47) obtained from the condyles of 24 embalmed cadavers. Two loading directions were examined, i.e., a direction coinciding with the predominant orientation of the plate-like trabeculae (axial loading) and a direction perpendicular to the plate-like trabeculae (transverse loading). Archimedes' principle was applied to determine bone density parameters. The cancellous bone was in axial loading 3.4 times stiffer and 2.8 times stronger upon failure than in transverse loading. High coefficients of correlation were found among the various mechanical properties and between them and the apparent density and volume fraction. The anisotropic mechanical properties can possibly be considered as a mechanical adaptation to the loading of the condyle in vivo.

Macroscopic anatomy of the heart of the ringed seal (Phoca hispida).

PubMed

Smodlaka, H; Henry, R W; Schumacher, J; Reed, R B

2008-02-01

Anatomical properties of the ringed seal (Phoca hispida) heart and associated blood vessels reveal adaptations related to requirements for diving. Seven adult ringed seals were embalmed and dissected to document the gross anatomical features of the heart. Computed tomography images of the thoracic cavity were taken on one seal prior to dissection. The shape and position of the heart is different from the typical carnivore heart. The most notable difference is its dorsoventral flattened appearance with its right and left sides positioned, respectively, within the thoracic cavity. The long axis of the heart is positioned horizontally, parallel to the sternum. The right ventricle is spacious with thin walls which extend caudally to the apex of the heart such that the apex is comprised of both right and left ventricles. The cusps of the left atrioventricular valve of the ringed seal heart resemble an uninterrupted, circular curtain making it challenging to distinguish the divisions into parietal and septal cusps.

Application of multislice spiral CT for guidance of insertion of thoracic spine pedicle screws: an in vitro study.

PubMed

Wang, Juan; Zhou, Yicheng; Hu, Ning; Wang, Renfa

2006-01-01

To investigate the value of the guidance of three dimensional (3-D) reconstruction of multi-slice spiral CT (MSCT) for the placement of pedicle screws, the 3-D anatomical data of the thoracic pedicles were measured by MSCT in two embalmed human cadaveric thoracic pedicles spines (T1-T10) to guide the insertion of pedicle screws. After pulling the screws out, the pathways were filled with contrast media. The PW, PH, TSA and SSA of developed pathways were measured on the CT images and they were also measured on the real objects by caliper and goniometer. Analysis of variance demonstrated that the difference between the CT scans and real objects had no statistical significance (P > 0.05). Moreover, the difference between pedicle axis and developed pathway also had no statistical significance (P > 0.05). The data obtained from 3-D reconstruction of MSCT demonstrated that individualized standards, are not only accurate but also helpful for the successful placement of pedicle screws.

Origin and development of forensic medicine in Egypt.

PubMed

Kharoshah, Magdy Abdel Azim; Zaki, Mamdouh Kamal; Galeb, Sherien Salah; Moulana, Ashraf Abdel Reheem; Elsebaay, Elsebaay Ahmed

2011-01-01

Egyptians are one of the first civilisations to practice the removal and examination of internal organs of humans. Their practices ranged from embalming to faith healing to surgery and autopsy. Modern radiological studies, together with various forensic techniques, allowed scientists unique glimpses of the state of health in Egypt 4000 years ago and discovered one of the earliest applications of autopsy, the main element of forensic medicine practice today. The Egyptian Forensic Medicine Authority handles a relatively large number of cases annually and depends on different assisting laboratories (forensic histopathology, microbiology, serology unit, DNA laboratory, forensic chemistry laboratory) as well as the Counterfeiting and Forgery unit. Crime scene investigations are performed mainly through the criminal laboratory related to the Ministry of Interior. Forensic Medicine is studied thoroughly in the faculty of medicine (undergraduates), as well as by forensic medical examiners at postgraduate level (diploma, master's and doctorate). This review recommends more scientific cooperation with universities in the field of forensic medicine and related sciences to solve various crimes with meticulous detail. Copyright © 2010 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Architecture of the Suprahyoid Muscles: A Volumetric Musculoaponeurotic Analysis.

PubMed

Shaw, Stephanie M; Martino, Rosemary; Mahdi, Ali; Sawyer, Forrest Kip; Mathur, Sunita; Hope, Andrew; Agur, Anne M

2017-10-17

Suprahyoid muscles play a critical role in swallowing. The arrangement of the fiber bundles and aponeuroses has not been investigated volumetrically, even though muscle architecture is an important determinant of function. Thus, the purpose was to digitize, model in three dimensions, and quantify the architectural parameters of the suprahyoid muscles to determine and compare their relative functional capabilities. Fiber bundles and aponeuroses from 11 formalin-embalmed specimens were serially dissected and digitized in situ. Data were reconstructed in three dimensions using Autodesk Maya. Architectural parameters were quantified, and data were compared using independent samples t-tests and analyses of variance. Based on architecture and attachment sites, suprahyoid muscles were divided into 3 groups: anteromedial, superolateral, and superoposterior. Architectural parameters differed significantly (p < .05) across muscles and across the 3 groups, suggesting differential roles in hyoid movement during swallowing. When activated simultaneously, anteromedial and superoposterior muscle groups could work together to elevate the hyoid. The results suggest that the suprahyoid muscles can have individualized roles in hyoid excursion during swallowing. Muscle balance may be important for identifying and treating hyolaryngeal dysfunction in patients with dysphagia.

Determining physiological cross-sectional area of extensor carpi radialis longus and brevis as a whole and by regions using 3D computer muscle models created from digitized fiber bundle data.

PubMed

Ravichandiran, Kajeandra; Ravichandiran, Mayoorendra; Oliver, Michele L; Singh, Karan S; McKee, Nancy H; Agur, Anne M R

2009-09-01

Architectural parameters and physiological cross-sectional area (PCSA) are important determinants of muscle function. Extensor carpi radialis longus (ECRL) and brevis (ECRB) are used in muscle transfers; however, their regional architectural differences have not been investigated. The aim of this study is to develop computational algorithms to quantify and compare architectural parameters (fiber bundle length, pennation angle, and volume) and PCSA of ECRL and ECRB. Fiber bundles distributed throughout the volume of ECRL (75+/-20) and ECRB (110+/-30) were digitized in eight formalin embalmed cadaveric specimens. The digitized data was reconstructed in Autodesk Maya with computational algorithms implemented in Python. The mean PCSA and fiber bundle length were significantly different between ECRL and ECRB (p < or = 0.05). Superficial ECRL had significantly longer fiber bundle length than the deep region, whereas the PCSA of superficial ECRB was significantly larger than the deep region. The regional quantification of architectural parameters and PCSA provides a framework for the exploration of partial tendon transfers of ECRL and ECRB.

Cadaver-based Necrotizing Fasciitis Model for Medical Training.

PubMed

Mohty, Kurt M; Cravens, Matthew G; Adamas-Rappaport, William J; Amini-Shervin, Bahareh; Irving, Steven C; Stea, Nicholas; Adhikari, Srikar; Amini, Richard

2017-04-14

Necrotizing fasciitis is a devastating infectious disease process that is characterized by extensive soft tissue necrosis along deep fascial planes, systemic toxicity, and high mortality. Ultrasound imaging is a rapid and non-invasive tool that can be used to help make the diagnosis of necrotizing fasciitis by identifying several distinctive sonographic findings. The purpose of this study is to describe the construction of a realistic diagnostic training model for necrotizing fasciitis using fresh frozen cadavers and common, affordable materials. Presently, fresh non-embalmed cadavers have been used at medical institutions for various educational sessions including cadaver-based ultrasound training sessions. Details for the preparation and construction of a necrotizing fasciitis cadaver model are presented here. This paper shows that the images obtained from the cadaver model closely imitate the ultrasound appearance of fluid and gas seen in actual clinical cases of necrotizing fasciitis. Therefore, it can be concluded that this cadaver-based model produces high-quality sonographic images that simulate those found in true cases of necrotizing fasciitis and is ideal for demonstrating the sonographic findings of necrotizing fasciitis.

"The soft embalmer of the still midnight": a problem of prescribing hypnotics in general practice.

PubMed Central

1976-01-01

Was it euthanasia or was it even murder? That is the rather dramatic question with which the case history ends. However, none of those taking part in this conference had any doubts that it was neither murder nor euthanasia. But all had doubts as to whether the patient received the best care which the medical and allied professions can command. The barrister declared that in law there would have been no case to answer but the consensus of opinion of the other participants was that as no real diagnosis had been made the treatment was essentially superficial - ensuring sleep for the patient by prescribing barbiturates. The most fundamental criticism of the management of this patient was that individuals looked after her rather than an interdisciplinary team, some member of which might properly have sought to overrule Dorothy (the patient's daughter) when she took her mother away from a nursing home. However, what makes this case conference fascinating is not the facts of the case or the treatment so much as the avenues for moral and social discussion opened for the reader. PMID:966261

An unusual case of Y-shaped right renal vein.

PubMed

Lavy, M; Martin, L; Eouzan, D; Turco, C; Heyd, B; Mantion, G; Parratte, B; Tatu, L

2015-01-01

Vascular renal anomalies are frequent, multiple and well described and result from errors in vessel embryogenesis between the 6th and 10th week of gestation. Historically, variations are described in anatomic dissection and currently mostly in image interpretation. We report an anatomic variation concerning the right renal vein which, to our knowledge, has never been described in the literature either by dissection or by radiological examination. This variation was discovered during the routine dissection of an embalmed male body. It consists of a Y-shaped right renal vein and is associated with multiple retroperitoneal variations: a bilateral accessory renal artery, a trident ending of the right renal artery and a left testicular vein variation. Venous and arterial renal anatomy and its variations are fundamentally important in renal surgery, especially concerning living donor renal grafts. These variations may be diagnosed thanks to injected tomodensitometry which has a good sensitivity and specificity for anomalies. Preoperative diagnosis of an anatomic vascular renal variation may reduce morbidity during surgery, which is why precise examination of injected tomography should be mandatory.

The morphometry of the laryngeal phonatory system - base of the anatomical study of the voice aptitudes.

PubMed

Hînganu, Marius Valeriu; Cozma, Romică Sebastian; Ciochină, Paula; Scutariu, Irina Andreea; Asimionoaiei-Simionescu, Cristina; Hînganu, Delia

2017-01-01

Speaking is one of the characteristics of the human race and the main factor that has marked our progress over time. The singing voice is the crowning of the speech act and the main component of the lyrical manifestation of personality. Doctors in various fields, but especially anatomists have been concerned about discovering how the voice and the substrate of its variability are formed, but these aspects have not yet been fully deciphered. This study is the starting point in our research on the phonation system, organized on three levels: laryngeal, oral, palatinal, pharyngeal, epiglottal and nasal. We performed the dissection of seven embalmed anatomical parts, on which, we made measurements of the anatomical elements involved in the phonation. We performed the same measurements on a batch of seven adults investigated by magnetic resonance imaging (MRI). The results were entered into the statistical calculation formulas and compared with each other and with the literature. The results of the study show that certain values resulting from the calculation formulas remain constant and others vary greatly from each individuals and gender.

A radiologic study of an ancient Egyptian mummy with a prosthetic toe.

PubMed

Brier, Bob; Vinh, Phuong; Schuster, Michael; Mayforth, Howard; Johnson Chapin, Emily

2015-06-01

A radiologic examination (both CT and traditional X-ray) of two mummies curated at the Albany Institute of History and Art revealed the identity of the mummified remains as well as details of the person's life style parameters (markers of occupational stress). These mummies, brought to the Institute over 100 years ago, were unstudied until 1989. This preliminary study led to the misappropriation of the remains, and subsequent switching of the remains within their coffins. Recent and more detailed analyses lead to the correct identification of sex, a re-association of the remains to their interment coffins, as well as a detailed analysis of occupational markers. A prosthetic toe was identified in one of the mummies which lead to the functional exploration of prosthetics in the past including their use as part of funerary processing in ancient Egypt. Finally, details of the embalming process place the wrapped mummy within the time frame identified on the coffin of the mummy identified as Ankhefenmut as well as confirming his social status. © 2015 Wiley Periodicals, Inc.

Does the nerve supply to both the superficial and deep surfaces of pectoralis major imply two separate developmental origins?

PubMed Central

Shinohara, H

1996-01-01

The nature of the nerve supply to the "pocket' of pectoralis major was examined on 7 randomly selected sides of 5 embalmed cadavers. The pocket was a U-shaped muscular fold, opening cranially. The anterior limb and inner surface of the fold were supplied by nerve branches that originated from the middle segment of the pectoral nerve loop and penetrated pectoralis minor. The outer surface of the posterior limb was supplied by one or two branches that extended from the caudal segment of the pectoral nerve loop. If the muscular U-shaped fold is unfolded, it becomes obvious that the posterior wall of the pocket forms the most caudal part of pectoralis major and is supplied from both the superficial (anterior) and deep (posterior) surfaces. This dual surface supply does not suggest any aspect of the developmental origin of the pocket but may simply be due to the relative positions of the pectoralis major and its nerve. Images Fig. 1 Fig. 2 Fig. 3 PMID:8621324

Queen Nefertari, the Royal Spouse of Pharaoh Ramses II: A Multidisciplinary Investigation of the Mummified Remains Found in Her Tomb (QV66)

PubMed Central

Habicht, Michael E.; Bianucci, Raffaella; Buckley, Stephen A.; Fletcher, Joann; Bouwman, Abigail S.; Öhrström, Lena M.; Seiler, Roger; Galassi, Francesco M.; Hajdas, Irka; Vassilika, Eleni; Böni, Thomas; Henneberg, Maciej; Rühli, Frank J.

2016-01-01

Queen Nefertari, the favourite Royal Consort of Pharaoh Ramses II (Ancient Egypt, New Kingdom, 19th Dynasty c. 1250 BC) is famous for her beautifully decorated tomb in the Valley of the Queens. Her burial was plundered in ancient times yet still many objects were found broken in the debris when the tomb was excavated. Amongst the found objects was a pair of mummified legs. They came to the Egyptian Museum in Turin and are henceforth regarded as the remains of this famous Queen, although they were never scientifically investigated. The following multidisciplinary investigation is the first ever performed on those remains. The results (radiocarbon dating, anthropology, paleopathology, genetics, chemistry and Egyptology) all strongly speak in favour of an identification of the remains as Nefertari’s, although different explanations—albeit less likely—are considered and discussed. The legs probably belong to a lady, a fully adult individual, of about 40 years of age. The materials used for embalming are consistent with Ramesside mummification traditions and indeed all objects within the tomb robustly support the burial as of Queen Nefertari. PMID:27902731

TVT ABBREVO: cadaveric study of tape position in foramen obturatum and adductor region.

PubMed

Hubka, Petr; Nanka, Ondrej; Masata, Jaromir; Martan, Alois; Svabik, Kamil

2016-07-01

The aim of the study was to describe fixation of the TVT ABBREVO and establish whether the tape penetrates through obturator muscles and membrane (obturator complex) into the adductor region and, if so, how far it penetrates. Eight formalin-embalmed female cadavers were used to simulate TVT ABBREVO surgery (totalling 16 insertions). Following tape insertion, dissection was performed and ends of the tape were identified. In cases of penetration, the length of tape penetrating into the adductor region was measured. Of the 16 cases, the tape ended in the obturator membrane in eight, in the internal obturator muscle in one, and penetrated through the obturator membrane into the external obturator muscle in five, where it remained. In two cases, it penetrated through the obturator internus muscle, obturator membrane and obturator externus muscle into the group of thigh adductors; one penetration was by 3 mm and the second by 10 mm. No contact with the obturator nerve or its branches was noted in any case. No TVT contact with the obturator nerve was noted; tape penetrated into the adductor region in two of the 16 cases.

A Multi-modality Approach Towards Elucidation of the Mechanism for Human Achilles Tendon Bending During Passive Ankle Rotation.

PubMed

Kinugasa, Ryuta; Taniguchi, Keigo; Yamamura, Naoto; Fujimiya, Mineko; Katayose, Masaki; Takagi, Shu; Edgerton, V Reggie; Sinha, Shantanu

2018-03-12

The in vitro unconstrained Achilles tendon is nearly straight, while in vivo experiments reveal that the proximal region of the Achilles tendon, adjacent to Kager's fat pad, bends ventrally during plantarflexion but remains nearly straight during dorsiflexion. Tendon bending is an important factor in determining the displacement of the foot compared to the shortening of the muscle fibers. The objective of this study was to elucidate the various mechanisms that could cause tendon bending, which currently remain unknown. Examination of Thiel-embalmed cadavers, with preservation of native articular joint mobility, revealed that the Achilles tendon still bent ventrally even when its surrounding tissues, including the skin surface, Kager's fat pad, and distal portions of the soleus muscle were removed. Shear modulus and collagen fiber orientation were distributed homogeneously with respect to the longitudinal line of the tendon, minimizing their causative contributions to the bending. Given that tendon bending is not caused by either the nature of the deformations of the tissues surrounding the Achilles tendon or its physical properties, we conclude that it results from the geometric architecture of the Achilles tendon and its configuration with respect to the surrounding tissues.

New Ancient Egyptian Human Mummies from the Valley of the Kings, Luxor: Anthropological, Radiological, and Egyptological Investigations.

PubMed

Rühli, Frank; Ikram, Salima; Bickel, Susanne

2015-01-01

The Valley of the Kings (arab. Wadi al Muluk; KV) situated on the West Bank near Luxor (Egypt) was the site for royal and elite burials during the New Kingdom (ca. 1500-1100 BC), with many tombs being reused in subsequent periods. In 2009, the scientific project "The University of Basel Kings' Valley Project" was launched. The main purpose of this transdisciplinary project is the clearance and documentation of nonroyal tombs in the surrounding of the tomb of Pharaoh Thutmosis III (ca. 1479-1424 BC; KV 34). This paper reports on newly discovered ancient Egyptian human mummified remains originating from the field seasons 2010-2012. Besides macroscopic assessments, the remains were conventionally X-rayed by a portable X-ray unit in situ inside KV 31. These image data serve as basis for individual sex and age determination and for the study of probable pathologies and embalming techniques. A total of five human individuals have been examined so far and set into an Egyptological context. This project highlights the importance of ongoing excavation and science efforts even in well-studied areas of Egypt such as the Kings' Valley.

Organic chemistry of embalming agents in Pharaonic and Graeco-Roman mummies.

PubMed

Buckley, S A; Evershed, R P

2001-10-25

Chemical treatments were an essential element of ancient Egyptian mummification. Although the inorganic salt natron is recognized as having a central role as a desiccant, without the application of organic preservatives the bodies would have decomposed in the humid environment of the tombs. The nature of the organic treatments remains obscure, because the ancient Egyptians left no written record of the process. Secondary textual evidence for mummification is provided by Herodotus, Diodorus Siculus, Strabo and Pliny. The most important account is that of Herodotus (about 450 yr bc), although archaeological evidence shows that by this time the process had declined significantly and the best results had been achieved centuries before. His account mentions myrrh, cassia, palm wine, 'cedar oil' (still widely disputed) and 'gum'; however, it is vague with respect to the specific natural products used. Here we report the results of chemical investigations of a substantial collection of samples of tissues, wrappings and 'resinous/bituminous' materials from provenanced and dated Egyptian mummies. We focused on examples of the 'classic' mummy-making culture of the Pharaonic or dynastic period, from which we can begin to track the development of mummification chronologically.

New Ancient Egyptian Human Mummies from the Valley of the Kings, Luxor: Anthropological, Radiological, and Egyptological Investigations

PubMed Central

Rühli, Frank; Ikram, Salima

2015-01-01

The Valley of the Kings (arab. Wadi al Muluk; KV) situated on the West Bank near Luxor (Egypt) was the site for royal and elite burials during the New Kingdom (ca. 1500–1100 BC), with many tombs being reused in subsequent periods. In 2009, the scientific project “The University of Basel Kings' Valley Project” was launched. The main purpose of this transdisciplinary project is the clearance and documentation of nonroyal tombs in the surrounding of the tomb of Pharaoh Thutmosis III (ca. 1479–1424 BC; KV 34). This paper reports on newly discovered ancient Egyptian human mummified remains originating from the field seasons 2010–2012. Besides macroscopic assessments, the remains were conventionally X-rayed by a portable X-ray unit in situ inside KV 31. These image data serve as basis for individual sex and age determination and for the study of probable pathologies and embalming techniques. A total of five human individuals have been examined so far and set into an Egyptological context. This project highlights the importance of ongoing excavation and science efforts even in well-studied areas of Egypt such as the Kings' Valley. PMID:26347313

Muscle parameters for musculoskeletal modelling of the human neck.

PubMed

Borst, Jordi; Forbes, Patrick A; Happee, Riender; Veeger, Dirkjan H E J

2011-05-01

To study normal or pathological neuromuscular control, a musculoskeletal model of the neck has great potential but a complete and consistent anatomical dataset which comprises the muscle geometry parameters to construct such a model is not yet available. A dissection experiment was performed on the left side of one 50th percentile male embalmed specimen. Geometrical data including muscle attachment sites were digitized using an Optotrak measurement system and laser diffraction was used to determine muscle sarcomere lengths. Bony landmarks were recorded and joint centres of rotation between different vertebrae were estimated using literature data. A total of 34 muscle parts of the neck were divided in 129 elements per body side. Muscle attachment sites, mass, physiological cross sectional area, fibre length, tendon length and optimal fibre length for each element are supplied as digital annexes to the paper. Results are coherent with other studies and new data are provided for several smaller muscles not reported elsewhere. Implementation of this dataset into a neck model is likely to improve the estimation of muscle forces and thus increase the model validity; this makes future neck models more suitable for the use as clinical tools. Copyright © 2010 Elsevier Ltd. All rights reserved.

Martin Van Butchell (1735-1814): the eccentric, "kook" dentist of old London.

PubMed

Christen, A G; Christen, J A

1999-11-01

This article is a thumbnail sketch of the life and times of Martin Van Butchell (1735-1814), an eccentric, "kook" advertising dentist of Old London. Van Butchell earned these descriptive labels by displaying an unorthodox lifestyle, an outrageous personal appearance and outlandish, extreme and socially unacceptable personal and professional behaviors. While the general populace seemed to be fascinated by his strange ways, dentists and physicians were generally alienated by them. Nevertheless, he was considered a good dentist for his time, and he was extremely popular with his patients. Martin practiced dentistry for 23 years, and he practiced medicine as well, specializing in the treatment of ruptures and anal fistulas. Van Butchell interacted greatly with both John and William Hunter, who became two of the most famous and talented physicians, surgeons, anatomists and biologists of all time. When his first wife, Mary died, Martin arranged for her body to be embalmed and publicly displayed in his dental office for advertising purposes. Her preserved body was shown at the Museum of the Royal College of Surgeons (London), until it was destroyed by a German fire bomb in May, 1941. Mary's remains were on public display for a total of 166 years.

Biomechanical outcome of proximal femoral nail antirotation is superior to proximal femoral locking compression plate for reverse oblique intertrochanteric fractures: a biomechanical study of intertrochanteric fractures.

PubMed

Ma, Jian-Xiong; Wang, Jie; Xu, Wei-Guo; Yu, Jing-Tao; Yang, Yang; Ma, Xin-Long

2015-01-01

Reverse obliquity intertrochanteric fractures are a challenge for orthopedic surgeons. The optimal internal fixation for repairing this type of unstable intertrochanteric fractures remains controversial. This study aimed to compare the biomechanical properties in axial load and cyclical axial load of proximal femoral nail antirotation (PFNA) and proximal femoral locking compression plate (PFLCP) for fixation of reverse obliquity intertrochanteric fractures. Sixteen embalmed cadaver femurs were sawed to simulate reverse obliquity intertrochanteric fracture and instrumented with PFNA or PFLCP. Axial loads and axial cyclic loads were applied to the femoral head by an Instron tester. If the implant-femur constructs did not fail, axial failure load was added to the remaining implant-femur constructs. Mean axial stiffness for PFNA was 21.10% greater than that of PFLCP. Cyclic axial loading caused significantly less (p=0.022) mean irreversible deformation in PFNA (3.43 mm) than in PFLCP (4.34 mm). Significantly less (p=0.002) mean total deformation was detected in PFNA (6.16 mm) than in PFLCP (8.67 mm). For fixing reverse obliquity intertrochanteric fractures, PFNA is superior to PFLCP under axial load.

Anatomy and histology of the transverse humeral ligament.

PubMed

Snow, Brian J; Narvy, Steven J; Omid, Reza; Atkinson, Roscoe D; Vangsness, C Thomas

2013-10-01

The classic literature describes the transverse humeral ligament (THL) as a distinct anatomic structure with a role in biceps tendon stability; however, recent literature suggests that it is not a distinct anatomic structure. The purpose of this study was to evaluate the gross and microscopic anatomy of the THL, including a specific investigation of the histology of this ligament. Thirty frozen, embalmed cadaveric specimens were dissected to determine the gross anatomy of the THL. Seven specimens were evaluated histologically for the presence of mechanoreceptors and free nerve endings. Two tissue layers were identified in the area described as the THL. In the deep layer, fibers of the subscapularis tendon were found to span the bicipital groove with contributions from the coracohumeral ligament and the supraspinatus tendon. Superficial to this layer was a fibrous fascial covering consisting of distinct bands of tissue. Neurohistology staining revealed the presence of free nerve endings but no mechanoreceptors. This study's findings demonstrate that the THL is a distinct structure continuous with the rotator cuff tendons and the coracohumeral ligament. The finding of free nerve endings in the THL suggests a potential role as a shoulder pain generator. Copyright 2013, SLACK Incorporated.

Science, art, and mistery in the statues and in the anatomical machines of the prince of sansevero: the masterpieces of the "Sansevero Chapel".

PubMed

Della Monica, Matteo; Galzerano, Domenico; Di Michele, Sara; Acquaviva, Fabio; Gregorio, Giovanni; Lonardo, Fortunato; Sguazzo, Francesca; Scarano, Francesca; Lama, Diana; Scarano, Gioacchino

2013-11-01

During the 18th century in Naples, Raimondo di Sangro, Prince of Sansevero, completed works on the family chapel, the so-called "Cappella Sansevero." The chapel houses statues of extraordinary beauty and spectacularly detailed but also, in the basement, two human skeletons known as the "Anatomical Machines" ("Macchine Anatomiche"). These two skeletons, a man and a pregnant woman, are entirely surrounded by their circulatory systems, just as if these were suddenly fixed. Legend, believed as truth until few years ago, says that Prince Raimondo had prepared and injected an unknown embalming substance in the blood vessels of two of his servants convicting them to eternal fixity. Recent investigations have demonstrated that, while the bones are authentic, the blood vessels are actually extraordinary artifacts that also reproduce some congenital malformations. The dreadful aspect of these two skeletons appears to be in strident contrast with the classic beauty of the statues which glorify and celebrate the ideal of morphology. Conversely, the two Anatomical Machines, protagonists of legends and superstitions since centuries, represent a marvelous example of science mixed with art. © 2013 Wiley Periodicals, Inc.

Anatomic Relationship Between Right Recurrent Laryngeal Nerve and Cervical Fascia and Its Application Significance in Anterior Cervical Spine Surgical Approach.

PubMed

Shan, Jianlin; Jiang, Heng; Ren, Dajiang; Wang, Chongwei

2017-04-15

An anatomic study of anterior cervical dissection of 42 embalmed cadavers. The aim was to study the anatomic relationship between recurrent laryngeal nerve (RLN) and cervical fascia combined with the requirements in anterior cervical spine surgery (ACSS). There has been no systematic research about how to avoid RLN injury in anterior cervical spine surgical approach from the aspect of the anatomic relationship between RLN and cervical fascia. Forty-two adult cadavers were dissected to observe the relationships between RLN and different cervical fascia layers. RLN pierced out the alar fascia from the inner edge of the carotid sheath in all cases, and the piercing position in 22 cases (52.4%) was located at the lower segment of T1. The enter point into visceral fascia of RLN was located at C7-T1 in 25 cases (59.5%). The middle layer of deep cervical fascia exhibited the most stable anatomic relationship with RLN at the carotid sheath confluence site. Pulling visceral sheath leftwards would significantly increase the RLN tension. Using the close and stable relationship between RLN and cervical fascia could help to avoid RLN injury in anterior cervical spine surgical approach. 4.

Chemical diversity of organic volatiles among comets: An emerging taxonomy and implications for processes in the proto-planetary disk

NASA Astrophysics Data System (ADS)

Mumma, Michael J.

2008-10-01

As messengers from the early Solar System, comets contain key information from the time of planet formation and even earlier some may contain material formed in our natal interstellar cloud. Along with water, the cometary nucleus contains ices of natural gases (CH4, C2H6), alcohols (CH3OH), acids (HCOOH), embalming fluid (H2CO), and even anti-freeze (ethylene glycol). Comets today contain some ices that vaporize at temperatures near absolute zero (CO, CH4), demonstrating that their compositions remain largely unchanged after 4.5 billion years. By comparing their chemical diversity, several distinct cometary classes have been identified but their specific relation to chemical gradients in the proto-planetary disk remains murky. How does the compositional diversity of comets relate to nebular processes such as chemical processing, radial migration, and dynamical scattering? No current reservoir holds a unique class, but their fractional abundance can test emerging dynamical models for origins of the scattered Kuiper disk, the Oort cloud, and the (proposed) main-belt comets. I will provide a simplified overview emphasizing what we are learning, current issues, and their relevance to the subject of this Symposium.

Histologic anatomy of the lesser metatarsophalangeal joint plantar plate.

PubMed

Gregg, J; Marks, P; Silberstein, M; Schneider, T; Kerr, J

2007-03-01

The plantar plate is the fibrocartilaginous structure that supports the ball of the foot, withstanding considerable compressive and tensile forces. This study describes the morphology of the plantar plate in order to understand its function and the pathologic disorders associated with it. Eight lesser metatarsophalangeal joint plantar plates from three soft-embalmed cadavers (74-92 years, two males, one female), and eight lesser metatarsophalangeal joint plantar plates from a fresh cadaver (19-year-old male) were obtained for histology assessment. Paraffin sections (10 microm) in the longitudinal and transverse planes were analyzed with bright-field and polarized light microscopy. The central plantar plate collagen bundles run in the longitudinal plane with varying degrees of undulation. The plantar plate borders run transversely and merge with collateral ligaments and the deep transverse intermetatarsal ligament. Bright-field microscopic evaluation shows the plantar aspect of the plantar plate becomes ligament-like the further distally it tapers, containing fewer chondrocytes, and a greater abundance of fibroblasts. The enthesis reveals longitudinal and interwoven collagen bundles entering the proximal phalanx with multiple interdigitations. Longer interdigitations centrally compared to the dorsal and plantar aspects suggest that the central fibers experience the greatest loads.

The Coronary Tree of the Anatomical Machines of the Prince of Sansevero: The reality of a legend.

PubMed

Michele, Sara Di; Mirabelli, Francesca; Gregorio, Giovanni; Lama, Diana; Paolisso, Giuseppe; Galzerano, Domenico

2015-01-01

During the 18 th century in Naples, Raimondo di Sangro, Prince of Sansevero, gave definitive form to the family chapel, the so-called "Cappella San Severo". The chapel houses not only extraordinarily beautiful and spectacularly detailed statues but also two human skeletons known as anatomical machines ("Macchine Anatomiche") in the basement. These two skeletons, a man and a pregnant woman, are entirely surrounded by their own circulatory system, just as they were suddenly and mysteriously, fixed. Legend, believed as truth until few years ago, tells that Prince Raimondo had prepared and injected an unknown embalming substance in their blood vessels convicting them to eternal fixity. Most recent investigations, however, demonstrated that while the bones are authentic, the blood vessels are actually an extraordinary artifact, even though the perfect reproduction of the coronary vascular tree, including congenital malformations in detail, raises some doubts about the technique used by the Prince. The dreadful aspect of these two skeletons appears to be in strident contrast with the classic beauty of the statues, which glorifies and celebrates the ideal of morphology. Conversely, the two "Anatomical Machines", protagonists of legends and superstitions since centuries, represent a marvelous example of science and art.

Laser scoop desobliteration: a method for minimally invasive remote recanalization of chronically occluded superficial femoral arteries

NASA Astrophysics Data System (ADS)

Heneweer, Carola; Siggelkow, Markus; Helle, Michael; Petzina, Rainer; Wulff, Asmus; Schaefer, Joost P.; Berndt, Rouven; Rusch, Rene; Wedel, Thilo; Klaws, Guenther; Müller-Gerbl, Magdalena; Röcken, Christoph; Jansen, Olav; Lutter, Georg; Cremer, Joachim; Groß, Justus

2015-02-01

Stenosis and occlusion of the superficial femoral artery (SFA) are most common in arterial occlusive disease. There are numerous interventional, surgical, and combined approaches to reconstitute maximum blood supply to the lower limb; however, despite intense clinical research, the long-term success rates are still poor. We present the first results with a catheter prototype for laser-based minimal invasive endarterectomy, called laser scoop desobliteration (LSD). The tip of a glass fiber containing a catheter was modified with a spatula head design and connected to an ultraviolet laser. It was tested in cadavers fixed with the Thiel embalming technique preserving tissue consistency, flexibility, and plasticity. After longitudinal arteriotomy of the SFA, a circular dissection between media and adventitia was performed. Then the LSD catheter was inserted and propagated with a progress of 1 mm/s. Afterward, the atheroma core, which showed a plain surface without substantial attaching tissue debris, was removed. Histological examination of the vessel wall showed that the dissection was performed at the media/adventitia interface. In summary, the constructed LSD catheter allowed a rapid and easy way to perform an endarterectomy, thereby offering an innovative approach in the treatment of chronic occluded SFA.

Anatomical risk evaluation of iatrogenic injury to the infrapatellar branch of the saphenous nerve during medial meniscus arthroscopic surgery.

PubMed

Koch, Guillaume; Kling, Agathe; Ramamurthy, Nitin; Edalat, Faramarz; Cazzato, Roberto Luigi; Kahn, Jean-Luc; Garnon, Julien; Clavert, Philippe

2017-06-01

To determine the relationship of the medial meniscus with the infrapatellar branches of the saphenous nerve, the primary goal is to define and characterize different risk areas for these nerves during medial meniscus surgery. After dissecting 20 embalmed cadaver knees, we defined 7 readily identifiable anatomical landmarks. For each knee, we recorded 2 morphological criteria and 16 measurements. The most common anatomical course is a main trunk that is 8 mm anterior to the tuberculum adductorium and 60 mm posterior to the midpoint of the medial patellar margin. It has two main infrapatellar branches. The nerve division is 23 mm above the joint line. The path is oblique with an angle of 55.5°. The anterior meniscal landmark is 24 mm from the upper branch and 42.5 mm from the lower branch. The posterior meniscal landmark is 55 mm from the upper branch and 38 mm from the lower branch. We defined a common anatomical course for the saphenous nerve and its infrapatellar branches. Then, three different areas were defined at risk for iatrogenic nerve injuries during medial meniscus.

Anatomical Study of the Neurovascular in Flexor Hallucis Longus Tendon Transfers.

PubMed

Mao, Haijiao; Dong, Wenwei; Shi, Zengyuan; Yin, Weigang; Xu, Dachuan; Wapner, Keith L

2017-10-27

The transfer of the flexor hallucis longus tendon or flexor digitorum longus tendon is frequently used for the treatment of posterior tibial tendon insufficiency or chronic Achilles tendinopathy. According to several anatomical studies, harvesting the flexor hallucis longus (FHL) tendon may cause nerve injury. Sixty-eight embalmed feet were dissected and anatomically classified to define the relationship between Henry's knot and the plantar nerves. Two different configurations were identified. In Pattern 1, which was observed in 64 specimens (94.1%), the distance between the medial plantar nerve and Henry's knot was 5.96 mm (range, 3.34 to 7.84, SD = 1.12). In Pattern 2, which was observed in 4 specimens (5.9%), there was no distance between the medial plantar nerve (MPN) and Henry's knot. No statistically significant difference was observed according to gender or side (p > 0.05). A retraction was performed to harvest the FHL through the posteromedial hindfoot incision using a single minimally invasive technique, and the medial and lateral plantar nerve lesions were scrupulously assessed. In conclusion, medial and lateral plantar nerve injuries did not occur more frequently, even after performing a single minimally invasive incision to harvest the FHL tendon, due to the large distance between the FHL tendon and the medial and lateral plantar nerves.

Executions and scientific anatomy.

PubMed

Dolezal, Antonín; Jelen, Karel; Stajnrtova, Olga

2015-12-01

The very word "anatomy" tells us about this branch's connection with dissection. Studies of anatomy have taken place for approximately 2.300 years already. Anatomy's birthplace lies in Greece and Egypt. Knowledge in this specific field of science was necessary during surgical procedures in ophthalmology and obstetrics. Embalming took place without public disapproval just like autopsies and manipulation with relics. Thus, anatomical dissection became part of later forensic sciences. Anatomical studies on humans themselves, which needed to be compared with the knowledge gained through studying procedures performed on animals, elicited public disapprobation and prohibition. When faced with a shortage of cadavers, anatomists resorted to obtaining bodies of the executed and suicide victims - since torture, public display of the mutilated body, (including anatomical autopsy), were perceived as an intensification of the death penalty. Decapitation and hanging were the main execution methods meted out for death sentences. Anatomists preferred intact bodies for dissection; hence, convicts could thus avoid torture. This paper lists examples of how this process was resolved. It concerns the manners of killing, vivisection on people in the antiquity and middle-ages, experiments before the execution and after, vivifying from seeming death, experiments with galvanizing electricity on fresh cadavers, evaluating of sensibility after guillotine execution, and making perfect anatomical preparations and publications during Nazism from fresh bodies of the executed.

Scenes from the past: radiologic evidence of anthropogenic mummification in the Capuchin Catacombs of Palermo, Sicily.

PubMed

Panzer, Stephanie; Zink, Albert R; Piombino-Mascali, Dario

2010-01-01

The purpose of this study was to use paleoradiologic analyses to investigate a sample of the mummies in the Capuchin Catacombs in Palermo, Sicily, in order to assess skeletal abnormalities and the state of preservation, especially the condition of the internal organs, and to determine radiologic evidence of anthropogenic mummification. Ten 19th and early 20th century mummies with good external preservation were investigated by using a portable direct radiography unit inside the Capuchin Catacombs. The radiographs clearly demonstrated signs of anthropogenic mummification in nine of the 10 mummies investigated. The embalming methods that had been used included (a) evisceration and arterial injection; (b) the placement of foreign materials into the orbits and the nasal and oral cavities; and (c) filling of the thoracic, abdominal, and rectal cavities with foreign materials. Organ preservation varied greatly among the mummies, although brain tissue was found in all of the mummies. Analyses of the skeletal material of the mummies showed evidence of healed vertebral fractures, age-related degenerative changes, and, in one of the child mummies, a remarkable skeletal pathologic condition. The radiographs clearly illustrated different methods of anthropogenic mummification in the catacomb mummies of Palermo, allowed assessment of the preservation of the mummies, and demonstrated skeletal abnormalities.

Radiological and archaeological investigation of a mummy from Roman Egypt curated in the National Museum of Lithuania.

PubMed

Piombino-Mascali, Dario; Jankauskas, Rimantas; Snitkuvienė, Aldona; Rutkauskas, Tadas; Sutherland, M Linda

2016-01-01

Among the collections belonging to the National Museum of Lithuania at Vilnius, resides an ancient Egyptian coffin containing a mummified human body. The coffin and its occupant are believed to have belonged to the King of Poland and to have been located in his palace at Warsaw. At the turn of the last century, Egyptologists dated the coffin to the end of the 21st dynasty (1070 BC-945 BC), and described the item as coming from Thebes, belonging to Hori, priest of Amun-Ra. However, no investigation was ever carried out on the human body associated with the coffin. Within the framework of the Lithuanian Mummy Project, the preserved human remains underwent computed tomographic investigation in order to reconstruct the biological profile of the subject and to determine the embalming method employed. This led to the identification of a young adult male. Additionally, the mummy shroud was stylistically assessed in order to determine the mummy's chronology in Egyptian history. Interestingly, the body could be ascribed to the Roman period of Egypt (30 BC-395 AD) due to analogies with the burial shrouds of the Soter group. This indicates a reuse of the coffin at some point in history.

Descriptive anatomy of the interscalene triangle and the costoclavicular space and their relationship to thoracic outlet syndrome: a study of 60 cadavers.

PubMed

Dahlstrom, Kelly A; Olinger, Anthony B

2012-06-01

Thoracic outlet syndrome classically results from constrictions in 1 or more of 3 specific anatomical locations: the interscalene triangle, costoclavicular space, and coracopectoral tunnel. Magnetic resonance and computed tomographic imaging studies suggest that, of the 3 potential locations for constriction, the costoclavicular space is the most susceptible to compression. This study of human cadavers aims to expand on the descriptive anatomy of the interscalene triangle and associated costoclavicular space. The interscalene angle, interscalene triangle base, and costoclavicular space were measured on 120 sides of embalmed human cadavers. Linear distances and angles were measured using a caliper and protractor, respectively. The data were analyzed by calculating the mean, range, and standard deviation. The range for the interscalene base was 0 to 21.0 mm with a mean of 10.7 mm. For the interscalene angle, the range was 4° to 22° with a mean of 11.3°. Measurements for the costoclavicular space ranged from 6 to 30.9 mm with a mean of 13.5 mm. No significant differences were observed between left and right interscalene triangles or costoclavicular spaces; furthermore, there were no differences between the sexes concerning these 2 locations. Copyright © 2012 National University of Health Sciences. Published by Mosby, Inc. All rights reserved.

Estimation of perimortal percent carboxy-heme in nonstandard postmortem specimens using analysis of carbon monoxide by GC/MS and iron by flame atomic absorption spectrophotometry.

PubMed

Middleberg, R A; Easterling, D E; Zelonis, S F; Rieders, F; Rieders, M F

1993-01-01

In decomposed, formalin-fixed, embalmed, exhumed, and some fire-dried cases in which normal blood is unavailable, the usual methods for determination of carboxyhemoglobin saturation frequently fail. To address these specimens, a method utilizing both gas chromatography/mass spectrometric (GC/MS) determination of carbon monoxide (CO) and flame atomic absorption spectrophotometry (FAAS) determination of iron (Fe), in the same specimen, was developed. The method is reported here, along with its application to seven pertinent forsensic death investigations. The CO analytical methodology involves acid liberation of the gas from the specimen aliquot in a headspace vial. After heating and equilibrating, a sample of the headspace vapor is injected into the GC/MS system with a gastight syringe. Quantitation is achieved by standard addition comparison utilizing the ideal gas law equation. Iron is quantified by FAAS analysis of the same aliquot used for the CO determination, following nitric acid digestion. The concentration is determined by comparison to a standard curve. A formula for determining the minimum percent carboxy-heme saturation was derived by using the ratio of the amount of CO to the amount of Fe in the aliquot analyzed. Tissue types analyzed include spleen, liver, muscle, dried blood, and unspecified decomposed tissue.

Anatomical consideration of the occipital cutaneous nerves and artery for the safe treatment of occipital neuralgia.

PubMed

Shin, Kang-Jae; Kim, Hong-San; O, Jehoon; Kwon, Hyun-Jin; Yang, Hun-Mu

2018-05-12

There is no standardized approach to the greater occipital nerve (GON) block technique for treating occipital neuralgia. The aim of the present study was to validate the previously-suggested guidelines for conventional injection techniques and to provide navigational guidelines for safe GON block. The GON, lesser occipital nerve (LON) and occipital artery (OA) were carefully dissected in the occipital region of embalmed cadavers. Using a 3D digitizer, the GON, LON, and OA were observed on the two reference lines. The distances between the landmarks were recorded and statistically analyzed. On the superior nuchal line, the mean distances between the external occipital protuberance (EOP) and the most medial branch of the GON was 33.5 mm. The mean distance between the EOP and the most medial branch of the OA was 37.4 mm. On the EOP-mastoid process (MP) line, the GON was on the medial third and the LON the lateral third of the EOP-MP line. The safe injection points on the EOP-MP line are about 3 cm from the EOP, 1 cm inferior parallel to the EOP-MP line, and about 3 cm away from the MP. This article is protected by copyright. All rights reserved. © 2018 Wiley Periodicals, Inc.

Musculoskeletal imaging with a prototype photon-counting detector.

PubMed

Gruber, M; Homolka, P; Chmeissani, M; Uffmann, M; Pretterklieber, M; Kainberger, F

2012-01-01

To test a digital imaging X-ray device based on the direct capture of X-ray photons with pixel detectors, which are coupled with photon-counting readout electronics. The chip consists of a matrix of 256 × 256 pixels with a pixel pitch of 55 μm. A monolithic image of 11.2 cm × 7 cm was obtained by the consecutive displacement approach. Images of embalmed anatomical specimens of eight human hands were obtained at four different dose levels (skin dose 2.4, 6, 12, 25 μGy) with the new detector, as well as with a flat-panel detector. The overall rating scores for the evaluated anatomical regions ranged from 5.23 at the lowest dose level, 6.32 at approximately 6 μGy, 6.70 at 12 μGy, to 6.99 at the highest dose level with the photon-counting system. The corresponding rating scores for the flat-panel detector were 3.84, 5.39, 6.64, and 7.34. When images obtained at the same dose were compared, the new system outperformed the conventional DR system at the two lowest dose levels. At the higher dose levels, there were no significant differences between the two systems. The photon-counting detector has great potential to obtain musculoskeletal images of excellent quality at very low dose levels.

A seventeenth century mandibular tumor in a North American Indian

USGS Publications Warehouse

Kelln, E.E.; McMichael, E.V.; Zimmermann, B.

1967-01-01

The oldest tumor so far recorded is believed to have been a hemangioma. It occurred in a bone of a dinosaur’s tail1 and thus considerably antedates the historical period. The oldest known human tumor is much younger, dating back only to the middle of the third century after Christ.1 It was found in the catacombs of Kom el Shougafa in Alexandria, Egypt. This bony tumor (believed to be an osteosarcoma) occurred in the ischium and lower part of the ilium of a pelvic bone. Mention also should be made of a sixteenth century Danish skeleton from Noestried, which had 134 osteomas, and the Bovidal skull, in which there was a sinus osteoma weighing over 12 pounds.2Tumorlike lesions were obviously a problem in Egypt and Assyria, as dissecting instruments and instructions for tumor removal have been found.3 Paleopathologic studies have not yet disclosed bony tumors which occurred in these periods when vigorous embalming techniques were in vogue, and it is possible that only soft-tissue tumors were of concern. Such soft-tissue tumors, of course, would not survive to the present day, and relative accounts of prehistoric neoplasms must be largely based on intraosseus or calcified tumors. Roentgenographic bone patterns, correlated with size, site, age, etc., have led archaeologists and paleopathologists to believe that most surviving ossified tumors are osteomas and osteosarcomas.4

Autopsy findings in bodies repatriated to the UK.

PubMed

Williams, Edward John; Davison, Andrew

2014-07-01

Following the death of a British National on foreign soil, a primary investigation is conducted by the authorities of that country; HM Coroner and the United Kingdom police have no jurisdiction to conduct investigations abroad. Upon repatriation of a body, the legal investigation in the UK remains largely unchanged since the publication of the "harmonisation of medico-legal autopsy rules" (1999) and the passing of the Coroners and Justice Act (2009). We identified 44 cases within a 10-year period. An invasive autopsy had been performed abroad in 25 cases; an autopsy report was received prior to UK autopsy in one case. Seven cases showed incomplete evisceration; the absence of part or whole organs was recorded in 11 cases. Toxicology was performed abroad in five cases. Recurring technical difficulties related chiefly to embalming, including difficulty with dissection and noxious fumes. When an autopsy had been performed abroad, the time to UK inquest was prolonged by an average of seven months. A verdict of unlawful killing was returned in nine cases. The discussion expands on these issues, and attempts to offer reasoned explanation where possible. Two cases are used as exemplars to highlight difficulties to both the pathologist and Coroner. This casework remains rare but the potential problems include: absence of tissue; lack of information; technical difficulties; and a disproportionately high number of unlawful killings, making clear the need for experience and caution when making the post mortem examination.

The journey of discovering skull base anatomy in ancient Egypt and the special influence of Alexandria.

PubMed

Elhadi, Ali M; Kalb, Samuel; Perez-Orribo, Luis; Little, Andrew S; Spetzler, Robert F; Preul, Mark C

2012-08-01

The field of anatomy, one of the most ancient sciences, first evolved in Egypt. From the Early Dynastic Period (3100 BC) until the time of Galen at the end of the 2nd century ad, Egypt was the center of anatomical knowledge, including neuroanatomy. Knowledge of neuroanatomy first became important so that sacred rituals could be performed by ancient Egyptian embalmers during mummification procedures. Later, neuroanatomy became a science to be studied by wise men at the ancient temple of Memphis. As religious conflicts developed, the study of the human body became restricted. Myths started to replace scientific research, squelching further exploration of the human body until Alexander the Great founded the city of Alexandria. This period witnessed a revolution in the study of anatomy and functional anatomy. Herophilus of Chalcedon, Erasistratus of Chios, Rufus of Ephesus, and Galen of Pergamon were prominent physicians who studied at the medical school of Alexandria and contributed greatly to knowledge about the anatomy of the skull base. After the Royal Library of Alexandria was burned and laws were passed prohibiting human dissections based on religious and cultural factors, knowledge of human skull base anatomy plateaued for almost 1500 years. In this article the authors consider the beginning of this journey, from the earliest descriptions of skull base anatomy to the establishment of basic skull base anatomy in ancient Egypt.

[Biomechanical research of antegrade intramedullary fixation for the metacarpal fractures].

PubMed

Zhang, Li-shan; Pan, Yong-wei; Tian, Guang-lei; Li, Wen-jun; Xia, Shao-hua; Tao, Jian-feng

2010-04-15

To study the biomechanical characteristics of antegrade intramedullary fixation for metacarpal fractures. From March to May 2008, both the 4th and 5th metacarpals from 25 formalin embalmed cadaver hands had three-point bending test after transverse osteotomy followed by randomly fixation with one of the following three methods: plate and screw, antegrade intramedullary K-wire, crossed K-wire. While, both the 2nd and 3rd metacarpals had torsional loading test after the same management as the 4th and 5th metacarpal had undergone. In the three-point bending test, both the maximum bending moment (M(max)) and bending rigidity (EI) of the antegrade intramedullary K-wire were comparable with those of the plate and screw, and were significantly larger than those of the crossed K-wire. In the torsional loading test, the antegrade intramedullary K-wire had a statistically smaller maximum torque (T(max)) than the plate and screw, and had a comparable T(max) with the crossed K-wire; while, the torsional rigidity (GJ) of the intramedullary K-wire was statistically weaker than that of both the plate and screw and the crossed wire. One single antegrade intramedullary K-wire can provide a satisfactory M(max) and EI for metacarpal fixation and shows relatively weak in the torsional loading test. The injured finger should be well protected to avoid torsional deformity in clinical practice.

Biomechanical study of three kinds of internal fixation for the treatment of sacroiliac joint disruption using biomechanical test and finite element analysis.

PubMed

Wu, Tao; Ren, Xuejiao; Cui, Yunwei; Cheng, Xiaodong; Peng, Shuo; Hou, Zhiyong; Han, Yongtai

2018-06-19

To compare the stability of sacroiliac joint disruption fixed with three kinds of internal fixation using both biomechanical test and finite element analysis. Five embalmed specimens of an adult were used. The symphysis pubis rupture and left sacroiliac joint disruption were created. The symphysis pubis was stabilized with a five-hole plate. The sacroiliac joint disruption was fixed with three kinds of internal fixation in a randomized design. Displacements of the whole specimen and shifts in the gap were recorded. Three-dimensional finite element models of the pelvis, the pelvis with symphysis pubis rupture and left sacroiliac joint disruption, and three kinds of internal fixation techniques were created and analyzed. Under the vertical load, the displacements and shifts in the gap of the pelvis fixed with minimally invasive adjustable plate (MIAP) combined with one iliosacral (IS) screw were the smallest, and the average displacements of the pelvis fixed with an anterior plate were the largest one. The differences among them were significant. In finite element analysis and MIAP combined with one IS screw fixation showed relatively best fixation stability and lowest risks of implant failure than two IS screws fixation and anterior plate fixation. The stability of sacroiliac joint disruption fixed with MIAP combined with one IS screw is better than that fixed with two IS screws and anterior plate under vertical load.

Basic Study for Ultrasound-Based Navigation for Pedicle Screw Insertion Using Transmission and Backscattered Methods

PubMed Central

Chen, Ziqiang; Wu, Bing; Zhai, Xiao; Bai, Yushu; Zhu, Xiaodong; Luo, Beier; Chen, Xiao; Li, Chao; Yang, Mingyuan; Xu, Kailiang; Liu, Chengcheng; Wang, Chuanfeng; Zhao, Yingchuan; Wei, Xianzhao; Chen, Kai; Yang, Wu; Ta, Dean; Li, Ming

2015-01-01

The purpose of this study was to understand the acoustic properties of human vertebral cancellous bone and to study the feasibility of ultrasound-based navigation for posterior pedicle screw fixation in spinal fusion surgery. Fourteen human vertebral specimens were disarticulated from seven un-embalmed cadavers (four males, three females, 73.14 ± 9.87 years, two specimens from each cadaver). Seven specimens were used to measure the transmission, including tests of attenuation and phase velocity, while the other seven specimens were used for backscattered measurements to inspect the depth of penetration and A-Mode signals. Five pairs of unfocused broadband ultrasonic transducers were used for the detection, with center frequencies of 0.5 MHz, 1 MHz, 1.5 MHz, 2.25 MHz, and 3.5 MHz. As a result, good and stable results were documented. With increased frequency, the attenuation increased (P<0.05), stability of the speed of sound improved (P<0.05), and penetration distance decreased (P>0.05). At about 0.6 cm away from the cortical bone, warning signals were easily observed from the backscattered measurements. In conclusion, the ultrasonic system proved to be an effective, moveable, and real-time imaging navigation system. However, how ultrasonic navigation will benefit pedicle screw insertion in spinal surgery needs to be determined. Therefore, ultrasound-guided pedicle screw implantation is theoretically effective and promising. PMID:25861053

Health-hazard-evaluation report HETA 87-387-2050, Ithaca College, Ithaca, New York

DOE Office of Scientific and Technical Information (OSTI.GOV)

Almaguer, D.; Klein, M.; Klincewicz, S.

1990-06-01

In response to a request from an authorized representative of the employees of Ithaca College located in Ithaca, New York, a study was made of possible hazardous conditions at the college stemming from the use of formalin solutions during the embalming and fixing of primates for study. Samples were collected in the anatomy laboratory, the refrigeration room, and the hallway which separated the two rooms. Analyses of the 22 samples collected ranged from nondetectable to 0.12 parts per million for formaldehyde. Two samples which contained quantifiable levels of formaldehyde were collected in the anatomy laboratory. All tests for phenol andmore » ethylene-glycol showed nondetectable levels. Measurements indicated the ventilation system supplied air to the location in line with requirements but that air distribution and exhaust within the laboratory were not conducive to minimizing occupant exposure to contaminants. Only one set of exhaust conditions was under negative pressure. Ventilation may have been inadequate. The staff reported symptoms of headache, sinus congestion, odors in the office, sore throat, and itching and burning eyes. The authors conclude that exposures to low levels of formaldehyde existed at the time of the survey. Formaldehyde levels measured during the study were not deemed high enough to be causing reported symptoms. The authors recommend measures to improve the ventilation system.« less

[The origin and development of fragrance activity in Chinese ancient times].

PubMed

Ding, Jie-yun; Jin, Zhi-jun

2010-05-01

It has a long history of the fragrance activities in the ancient China. During the period of pre-Qin, it was mainly used in the therapy and worship. Until the Three Kingdoms, the crowd using the fragrance expanded from the royal to the literati and the general officials. People applied the spices to incense clothes, purify rooms, prevent and treat epidemic diseases in daily. In the worship, the spices were dedicated to Gods and other fairies. The fragrance was developed quickly during the period from Wei Dynasty to South and North Dynasties. People had more experiences of spices used as medicines, the formula of spices were used more widely. Then, during the period from Sui Dynasty to Song Dynasty, the fragrance activities climbed to the peak. The fragrance activities were institutionalized, when nobility matched their spices each other. The Literati made spice products and enjoyed the fragrance activities. Doctors knew more than before in the application experiences and species of spices. In the times of Yuan, Ming and Qing Dynasty, the fragrance activities spread among the public. The spices appeared in each side of the daily life of nobility, when natural fruits appeared in the fragrance activities. External therapy with spices appeared in the clinical. In addition to prevention and therapy, spices should be used in the embalming. After a long period, the fragrance activities had gradually developed into a kind of culture.

An anatomical study comparing two surgical approaches for isolated talonavicular arthrodesis.

PubMed

Higgs, Zoe; Jamal, Bilal; Fogg, Quentin A; Kumar, C Senthil

2014-10-01

Two operative approaches are commonly used for isolated talonavicular arthrodesis: the medial and the dorsal approach. It is recognized that access to the lateral aspect of the talonavicular joint can be limited when using the medial approach, and it is our experience that using the dorsal approach addresses this issue. We performed an anatomical study using cadaver specimens, to compare the amount of articular surface that can be accessed by each operative approach. Medial and dorsal approaches to the talonavicular joint were performed on each of 11 cadaveric specimens (10 fresh frozen, 1 embalmed). Distraction of the joint was performed as used intraoperatively and the accessible area of articular surfaces was marked for each of the 2 approaches using a previously reported technique. Disarticulation was performed and the marked surface area was quantified using an immersion digital microscribe, allowing a 3-dimensional virtual model of the articular surfaces to be assessed. The median percentage of total accessible talonavicular articular surface area for the medial and dorsal approaches was 71% and 92%, respectively (Wilcoxon signed-rank test, P < .001). This study provides quantifiable measurements of the articular surface accessible by the medial and dorsal approaches to the talonavicular joint. These data support for the use of the dorsal approach for talonavicular arthrodesis, particularly in cases where access to the lateral half of the joint is necessary. © The Author(s) 2014.

Dental status of three Egyptian mummies: radiological investigation by multislice computerized tomography.

PubMed

Gerloni, Alessandro; Cavalli, Fabio; Costantinides, Fulvio; Costantinides, Fulvia; Bonetti, Stefano; Paganelli, Corrado

2009-06-01

The aim of the study was to provide a paleopathologic and radiologic overview of the jaws and teeth of 3 Egyptian mummies preserved in the Civic Museum of History and Art in Trieste. Computerized tomography (CT) imaging and postprocessing techniques were used to examine the oral structures. A 16-slice CT scanner was used (Aquilion 16; Toshiba Medical Systems Europe, Zoetermeer, The Netherlands). Scans were obtained at high resolution. Orthogonal-plane and 3-dimensional (3D) reconstructions were created along with curved reconstructions of the lower and upper jaws. Determination of decayed/missing teeth (DMT) and decayed/missing/tooth surfaces (DMTs) were made with 3D images. Analyses revealed differences in the embalming techniques and state of preservation of the bodies. Marked wear of the occlusal surfaces was a characteristic finding in all of the mummies. The DMT and DMTs were low compared with values for contemporary populations. Two mummies had fully erupted third molars. All mummies exhibited bone changes consistent with periodontitis. The CT evaluations of the oral structures of the mummies provided insight into the dental status and oral diseases of these ancient Egyptians. The low DMT and DMTs values and indications of periodontitis may be associated with the lifestyle of these Egyptians. The fully erupted and well aligned third molars may represent a morphologic adaptation of the arches to the muscular activity associated with grinding tough foods.

The potential complications of open carpal tunnel release surgery to the ulnar neurovascular bundle and its branches: A cadaveric study.

PubMed

Boughton, O; Adds, P J; Jayasinghe, J A P

2010-07-01

This study investigated the ulnar artery and the ulnar nerve and its branches in the palm to assess how frequently they may be at risk of damage during open carpal tunnel release surgery. Twenty-one formalin-embalmed cadaveric hands were dissected, and the proximity of the ulnar neurovascular bundle to two different lines of incision, the 3rd and 4th interdigital web space axis and the ring finger axis, was assessed and compared. It was found that an incision in the latter (ring finger) axis put the ulnar artery at risk in 12 of 21 specimens, whereas an incision in the former axis (3rd/4th interdigital web space) put the ulnar artery at risk in only two specimens. In 15 hands at least one structure (the ulnar artery or a branch of the ulnar nerve) was at risk in the ring finger axis compared to only seven hands in the axis of the 3rd/4th interdigital web space. We conclude that the ulnar artery and branches of the ulnar nerve are at increased risk of damage with an incision in the axis of the ring finger. The importance of using a blunt dissection technique under direct vision during surgery to identify and preserve these structures and median nerve branches is emphasized. (c) 2010 Wiley-Liss, Inc.

Wireless Mobile Technology to Improve Workflow and Feasibility of MR-Guided Percutaneous Interventions

PubMed Central

Rube, Martin A.; Holbrook, Andrew B.; Cox, Benjamin F.; Buciuc, Razvan; Melzer, Andreas

2015-01-01

Purpose A wireless interactive display and control device combined with a platform-independent web-based User Interface (UI) was developed to improve the workflow for interventional Magnetic Resonance Imaging (iMRI). Methods The iMRI-UI enables image acquisition of up to three independent slices using various pulse sequences with different contrast weighting. Pulse sequence, scan geometry and related parameters can be changed on the fly via the iMRI-UI using a tablet computer for improved lesion detection and interventional device targeting. The iMRI-UI was validated for core biopsies with a liver phantom (n=40) and Thiel soft-embalmed human cadavers (n=24) in a clinical 1.5T MRI scanner. Results The iMRI-UI components and setup were tested and found conditionally MRI-safe to use according to current ASTM standards. Despite minor temporary touchscreen interference at a close distance to the bore (<20 cm), no other issues regarding quality or imaging artefacts were observed. The 3D root-mean-square distance error was 2.8±1.0 (phantom) / 2.9±0.8 mm (cadaver) and overall procedure times ranged between 12–22 (phantom) / 20–55 minutes (cadaver). Conclusions The wireless iMRI-UI control setup enabled fast and accurate interventional biopsy needle placements along complex trajectories and improved the workflow for percutaneous interventions under MRI guidance in a preclinical trial. PMID:25179151

Verification of Embolic Channel Causing Blindness Following Filler Injection.

PubMed

Tansatit, Tanvaa; Moon, Hyoung Jin; Apinuntrum, Prawit; Phetudom, Thavorn

2015-02-01

Ocular complications following cosmetic filler injections are serious situations. This study provided scientific evidence that filler in the facial and the superficial temporal arteries could enter into the orbits and the globes on both sides. We demonstrated the existence of an embolic channel connecting the arterial system of the face to the ophthalmic artery. After the removal of the ocular contents from both eyes, liquid dye was injected into the cannulated channel of the superficial temporal artery in six soft embalmed cadavers and different color dye was injected into the facial artery on both sides successively. The interior sclera was monitored for dye oozing from retrograde ophthalmic perfusion. Among all 12 globes, dye injections from the 12 superficial temporal arteries entered ipsilateral globes in three and the contralateral globe in two arteries. Dye from the facial artery was infused into five ipsilateral globes and in three contralateral globes. Dye injections of two facial arteries in the same cadaver resulted in bilateral globe staining but those of the superficial temporal arteries did not. Direct communications between the same and different arteries of the four cannulated arteries were evidenced by dye dripping from the cannulating needle hubs in 14 of 24 injected arteries. Compression of the orbital rim at the superior nasal corner retarded ocular infusion in 11 of 14 arterial injections. Under some specific conditions favoring embolism, persistent interarterial anastomoses between the face and the eye allowed filler emboli to flow into the globe causing ocular complications.

Twente spine model: A complete and coherent dataset for musculo-skeletal modeling of the thoracic and cervical regions of the human spine.

PubMed

Bayoglu, Riza; Geeraedts, Leo; Groenen, Karlijn H J; Verdonschot, Nico; Koopman, Bart; Homminga, Jasper

2017-06-14

Musculo-skeletal modeling could play a key role in advancing our understanding of the healthy and pathological spine, but the credibility of such models are strictly dependent on the accuracy of the anatomical data incorporated. In this study, we present a complete and coherent musculo-skeletal dataset for the thoracic and cervical regions of the human spine, obtained through detailed dissection of an embalmed male cadaver. We divided the muscles into a number of muscle-tendon elements, digitized their attachments at the bones, and measured morphological muscle parameters. In total, 225 muscle elements were measured over 39 muscles. For every muscle element, we provide the coordinates of its attachments, fiber length, tendon length, sarcomere length, optimal fiber length, pennation angle, mass, and physiological cross-sectional area together with the skeletal geometry of the cadaver. Results were consistent with similar anatomical studies. Furthermore, we report new data for several muscles such as rotatores, multifidus, levatores costarum, spinalis, semispinalis, subcostales, transversus thoracis, and intercostales muscles. This dataset complements our previous study where we presented a consistent dataset for the lumbar region of the spine (Bayoglu et al., 2017). Therefore, when used together, these datasets enable a complete and coherent dataset for the entire spine. The complete dataset will be used to develop a musculo-skeletal model for the entire human spine to study clinical and ergonomic applications. Copyright © 2017 Elsevier Ltd. All rights reserved.

Use of Eye Tracking as an Innovative Instructional Method in Surgical Human Anatomy.

PubMed

Sánchez-Ferrer, María Luísa; Grima-Murcia, María Dolores; Sánchez-Ferrer, Francisco; Hernández-Peñalver, Ana Isabel; Fernández-Jover, Eduardo; Sánchez Del Campo, Francisco

Tobii glasses can record corneal infrared light reflection to track pupil position and to map gaze focusing in the video recording. Eye tracking has been proposed for use in training and coaching as a visually guided control interface. The aim of our study was to test the potential use of these glasses in various situations: explanations of anatomical structures on tablet-type electronic devices, explanations of anatomical models and dissected cadavers, and during the prosection thereof. An additional aim of the study was to test the use of the glasses during laparoscopies performed on Thiel-embalmed cadavers (that allows pneumoinsufflation and exact reproduction of the laparoscopic surgical technique). The device was also tried out in actual surgery (both laparoscopy and open surgery). We performed a pilot study using the Tobii glasses. Dissection room at our School of Medicine and in the operating room at our Hospital. To evaluate usefulness, a survey was designed for use among students, instructors, and practicing physicians. The results were satisfactory, with the usefulness of this tool supported by more than 80% positive responses to most questions. There was no inconvenience for surgeons and that patient safety was ensured in the real laparoscopy. To our knowledge, this is the first publication to demonstrate the usefulness of eye tracking in practical instruction of human anatomy, as well as in teaching clinical anatomy and surgical techniques in the dissection and operating rooms. Copyright © 2017 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Three-dimensional study of pectoralis major muscle and tendon architecture.

PubMed

Fung, Lillia; Wong, Brian; Ravichandiran, Kajeandra; Agur, Anne; Rindlisbacher, Tim; Elmaraghy, Amr

2009-05-01

A thorough understanding of the normal structural anatomy of the pectoralis major (PM) is of paramount importance in the planning of PM tendon transfers or repairs following traumatic PM tears. However, there is little consensus regarding the complex musculotendinous architecture of the PM in the anatomic or surgical literature. The purpose of this study is to model and quantify the three-dimensional architecture of the pectoralis muscle and tendon. Eleven formalin embalmed cadaveric specimens were examined: five (2M/3F) were serially dissected, digitized, and modeled in 3D using Autodesk Maya; six (4M/2F) were dissected and photographed. The PM tendon consisted of longer anterior and shorter posterior layers that were continuous inferiorly. The muscle belly consisted of an architecturally uniform clavicular head (CH) and a segmented sternal head (SH) with 6-7 segments. The most inferior SH segment in all specimens was found to fold anteriorly forming a trough that cradled the inferior aspect of the adjacent superior segment. No twisting of either the PM muscle or tendon was noted. Within the CH, the fiber bundle lengths (FBL) were found to increase from superior to inferior, whereas the mean FBLs of SH were greatest in segments 3-5 found centrally. The mean lateral pennation angle was greater in the CH (29.4 +/- 6.9 degrees ) than in the SH (20.6 +/- 2.7 degrees ). The application of these findings could form the basis of future studies to optimize surgical planning and functional recovery of repair/reconstruction procedures.

Anatomical bases of the surgical dissection of the interatrial septum: a morphological and histological study.

PubMed

Filaire, Marc; Nohra, Olivier; Sakka, Laurent; Chadeyras, Jean Baptiste; Da Costa, Valence; Naamee, Adel; Bailly, Patrick; Escande, Georges

2008-06-01

The interatrial septum (IAS) can be dissected to resect pulmonary tumors invading the left atrium. The aim of this study was to describe the dissected structures, and to expose the benefits, the limits, and the embryologic reasons of such dissection. We dissected the IAS of 11 fresh, non-embalmed human hearts. The dissected structures were described and the length and depth of the dissection were measured. A histological study was performed in four other fresh hearts to identify and differentiate between dissectible and non-dissectible structures. The dissection was performed through a fatty tissue located between two muscular walls. The depth limit of the IAS dissection was identified as the limbus of the fossa ovalis and the muscular roof of the atria. The section of the latter doubles the depth of the dissection at the level of the upper pulmonary veins. Mean length of the dissected IAS was 77 mm (55-90). Mean depths of the IAS were 41 mm (35-50) at the level of the left upper pulmonary vein, 27 mm (12-35) between the upper and lower pulmonary veins, and 14 mm (8-20) at the level of the left inferior pulmonary vein The surgical dissection of the IAS is performed through the septum secundum that appears as an infold of the atrial wall. The length of the resectable left atrial cuff reaches a mean of 40 mm at the level of the upper pulmonary vein.

[Attempt to reduce the formaldehyde concentration by blowing cooled fresh air down in to the breathing zone of medical students from an admission port on the ceiling during gross anatomy class].

PubMed

Takayanagi, Masaaki; Sakai, Makoto; Ishikawa, Youichi; Murakami, Kunio; Kimura, Akihiko; Kakuta, Sachiko; Sato, Fumi

2008-09-01

Cadavers in gross anatomy laboratories at most medical schools are conventionally embalmed in formaldehyde solution, which is carcinogenic to humans. Medical students and instructors are thus exposed to formaldehyde vapors emitted from cadavers during dissection. To reduce high formaldehyde concentrations in the breathing zone above cadavers being examined by anatomy medical students provisionally, dissection beds were located under existing admission ports on the ceiling to supply cooled fresh air from the admission port blowing downward on to the cadaver. In all cases, compared to normal condition, the downward flow of cooled fresh air from an admission port reduced formaldehyde concentrations by 0.09-0.98 ppm and reduced to 12.6-65.4% in the air above a cadaver in the breathing zone of students. The formaldehyde concentrations above cadavers under admission ports were not more than the formaldehyde concentrations between beds representing the indoor formaldehyde concentrations. Although the application of an existing admission port on the ceiling in this study did not remove formaldehyde, the downflow of cooled fresh air using this system reduced the formaldehyde concentration in the air above cadavers being attended by anatomy students during dissections. These results suggest the need for reducing formaldehyde levels in gross anatomy laboratories using fundamental countermeasures in order to satisfy the guidelines of 0.08 ppm established by the World Health Organization and the Japan Ministry of Health, Labor and Welfare.

Formaldehyde exposure in gross anatomy laboratory of Suranaree University of Technology: a comparison of area and personal sampling.

PubMed

Saowakon, Naruwan; Ngernsoungnern, Piyada; Watcharavitoon, Pornpun; Ngernsoungnern, Apichart; Kosanlavit, Rachain

2015-12-01

Cadavers are usually preserved by embalming solution which is composed of formaldehyde (FA), phenol, and glycerol. Therefore, medical students and instructors have a higher risk of exposure to FA inhalation from cadavers during dissection. Therefore, the objective of this study was to evaluate the FA exposure in indoor air and breathing zone of medical students and instructors during dissection classes in order to investigate the relationship between them. The indoor air and personal air samples in breathing zone were collected three times during anatomy dissection classes (in January, August, and October of 2014) with sorbent tubes, which were analyzed by high-performance liquid chromatography (HPLC). The air cleaner machines were determined by weight measurement. Pulmonary function tests and irritation effects were also investigated. The mean of FA concentrations ranged from 0.117 to 0.415 ppm in the indoor air and from 0.126 to 1.176 ppm in the breathing zone of students and instructors. All the personal exposure data obtained exceeded the threshold limit of NIOSH and WHO agencies. The air cleaner machines were not significant difference. The pulmonary function of instructors showed a decrease during attention of classes and statistically significant decreasing in the instructors more than those of the students. Clinical symptoms that were observed in nose and eyes were irritations with general fatigue. We suggested that the modified exhaust ventilation and a locally ventilated dissection work table were considered for reducing FA levels in the gross anatomy dissection room.

Reduced mechanical load decreases the density, stiffness, and strength of cancellous bone of the mandibular condyle.

PubMed

Giesen, E B W; Ding, M; Dalstra, M; van Eijden, T M G J

2003-05-01

To investigate the influence of decreased mechanical loading on the density and mechanical properties of the cancellous bone of the human mandibular condyle. Destructive compressive mechanical tests were performed on cancellous bone specimens.Background. Reduced masticatory function in edentate people leads to a reduction of forces acting on the mandible. As bone reacts to its mechanical environment a change in its material properties can be expected. Cylindrical bone specimens were obtained from dentate and edentate embalmed cadavers. Mechanical parameters were determined in the axial and in the transverse directions. Subsequently, density parameters were determined according to a method based on Archimedes' principle. The apparent density and volume fraction of the bone were about 18% lower in the edentate group; no age-related effect on density was found. The decrease of bone in the edentate group was associated with a lower stiffness and strength (about 22% and 28%, respectively). The ultimate strain, however, did not differ between the two groups. Both groups had similar mechanical anisotropy; in axial loading the bone was stiffer and stronger than in transverse loading. Reduced mechanical load had affected the density and herewith the mechanical properties of condylar cancellous bone, but not its anisotropy. The change in material properties of the cancellous bone after loss of teeth indicate that the mandibular condyle is sensitive for changes in its mechanical environment. Therefore, changes in mechanical loading of the condyle have to be accounted for in surgical procedures of the mandible.

Architectural measures of the cancellous bone of the mandibular condyle identified by principal components analysis.

PubMed

Giesen, E B W; Ding, M; Dalstra, M; van Eijden, T M G J

2003-09-01

As several morphological parameters of cancellous bone express more or less the same architectural measure, we applied principal components analysis to group these measures and correlated these to the mechanical properties. Cylindrical specimens (n = 24) were obtained in different orientations from embalmed mandibular condyles; the angle of the first principal direction and the axis of the specimen, expressing the orientation of the trabeculae, ranged from 10 degrees to 87 degrees. Morphological parameters were determined by a method based on Archimedes' principle and by micro-CT scanning, and the mechanical properties were obtained by mechanical testing. The principal components analysis was used to obtain a set of independent components to describe the morphology. This set was entered into linear regression analyses for explaining the variance in mechanical properties. The principal components analysis revealed four components: amount of bone, number of trabeculae, trabecular orientation, and miscellaneous. They accounted for about 90% of the variance in the morphological variables. The component loadings indicated that a higher amount of bone was primarily associated with more plate-like trabeculae, and not with more or thicker trabeculae. The trabecular orientation was most determinative (about 50%) in explaining stiffness, strength, and failure energy. The amount of bone was second most determinative and increased the explained variance to about 72%. These results suggest that trabecular orientation and amount of bone are important in explaining the anisotropic mechanical properties of the cancellous bone of the mandibular condyle.

Surgical anatomy of the posterior liver surface: the retrohepatic lamina as the basis for mobilisation of the right liver.

PubMed

Macchi, Veronica; Porzionato, Andrea; Bardini, Romeo; Picardi, Edgardo Enrico Edoardo; De Caro, Raffaele

2013-10-01

During right hepatectomies, dissection of the bare area is performed to obtain mobilisation of the liver. Fifty computed tomography scans of the upper abdomen of patients were examined. Specimens of supramesocolic compartment were sampled from 10 un-embalmed cadavers. Macrosections were cut for histotopographic study. In four cadavers, in situ dissection of the posterior liver surface was performed. The hepatophrenic tissue showed a stratigraphic organisation resulting from the juxtaposition of thin layer of dense connective tissue corresponding to the inferior diaphragmatic fascia (mean thickness is 30 ± 4 μm); variable amount of fibroadipose tissue corresponding to retroperitoneal fibroadipose tissue (mean thickness is 34 ± 8 μm); two connective layers with nets of flat cells forming a fusion fascia, the retrohepatic lamina (mean thickness 24 ± 6 μm); and layer of connective tissue corresponding to the hepatic capsule. The juxta-caval portion of the retrohepatic lamina, connecting the right and left sides of the caval groove, forms the inferior vena cava ligament. During dissection, fluid injection developed a preferential plane between the two layers of the retrohepatic lamina, close to the hepatic surface, and no major or minor vessels were ever found along this plane. During right hepatectomy, to reduce the risk of dissemination of tumour cells, the dissection plane should be performed between the two layers of the retrohepatic lamina.

Rural neurosurgical and spinal laboratory setup.

PubMed

Smith, Adam; Gagliardi, Filippo; Pelzer, Nicholas Robert; Hampton, Jacob; Chau, Anthony Minh Tien; Stewart, Fiona; Mortini, Pietro; Gragnaniello, Cristian

2015-12-01

Increasing focus has been placed on the use of simulation in neurosurgical and spinal surgical training worldwide, with the establishment of many surgical laboratories dedicated to such purpose. So far, the opportunities for hands-on cadaveric training in the areas of neurosurgery and spine surgery remain limited in Australia, owing to various factors, including the abolition of dissection in many medical schools, high maintenance requirements and widespread geographical distribution of surgical trainees. We established a cadaver-based neurosurgical laboratory based at the medical school of the University of New England in Armidale, Australia, which is used by the surgical dissection course for junior surgical trainees offered by the university. We reported our experiences in setting up a neurosurgical research laboratory, and explored the feasibility of establishing a cost-effective anatomical research facility in a rural setting in Australia. We found that Genelyn(TM)-fixed cadavers had limited movements of the head as required for adequate surgical positioning and exposure. Furthermore, we discovered that bodies embalmed via the femoral vein had poorly perfused heads after surgical exposure, and thus decapitation had to be performed unfortunately for our purpose. Cadaver samples and surgical equipment were sourced from various veterinary practices and commercial companies. Using human and animal cadavers, this laboratory provided trainees with hands-on opportunities to improve their surgical skills and neuroanatomical knowledge, as well as develop familiarity with highly specialized surgical equipment. We demonstrated the feasibility of establishing a cost-effective neurosurgical research laboratory in Australia and discussed various aspects of its maintenance.

Parotid Branches of the Auriculotemporal Nerve: An Anatomical Study With Implications for Frey Syndrome.

PubMed

Iwanaga, Joe; Fisahn, Christian; Watanabe, Koichi; Bobek, Samuel L; Ogata, Kinuko; Tanoue, Ryuichiro; Kusukawa, Jingo; Oskouian, Rod J; Tubbs, R Shane

2017-01-01

The auriculotemporal nerve is one of the many branches of the mandibular division of the trigeminal nerve. Of these, its superficial temporal branch has been most described. Although the parotid branches, secretomotor fibers to the parotid gland, are well known as the cause of Frey syndrome, there have been almost no descriptions of their anatomy. In this study, the authors dissected the parotid branches of the auriculotemporal nerve to elucidate their anatomy. A total of 10 sides from 7 adult and embalmed cadaver heads were used in this study. The specimens were derived from 3 males and 4 females, the age of cadavers at death ranged from 65 to 92 years old. Measurements included their diameter and the distance of their branching point from the main trunk of the auriculotemporal nerve from the middle of the tragus. Three of 10 sides had 2 parotid branches and 7 sides were found to have 1 parotid branch. The vertical distance between middle of the tragus to branching point of the parotid branch ranged from 1.79 to 16.17 mm. The horizontal distance between middle of the tragus to branching point of the parotid branch ranged from 3.03 to 12.62 mm. The diameter of the parotid branch ranged from 0.31 to 0.49 mm. An improved knowledge of the parotid branch of the auriculotemporal nerve might decrease injury to these structures with the potential for postoperative.

Real-time visualization of ultrasound-guided retrobulbar blockade: an imaging study.

PubMed

Luyet, C; Eichenberger, U; Moriggl, B; Remonda, L; Greif, R

2008-12-01

Retrobulbar anaesthesia allows eye surgery in awake patients. Severe complications of the blind techniques are reported. Ultrasound-guided needle introduction and direct visualization of the spread of local anaesthetic may improve quality and safety of retrobulbar anaesthesia. Therefore, we developed a new ultrasound-guided technique using human cadavers. In total, 20 blocks on both sides in 10 embalmed human cadavers were performed. Using a small curved array transducer and a long-axis approach, a 22 G short bevel needle was introduced under ultrasound guidance lateral and caudal of the eyeball until the needle tip was seen 2 mm away from the optic nerve. At this point, 2 ml of contrast dye as a substitute for local anaesthetic was injected. Immediately after the injection, the spread of the contrast dye was documented by means of CT scans performed in each cadaver. The CT scans showed the distribution of the contrast dye in the muscle cone and behind the posterior sclera in all but one case. No contrast dye was found inside the optic nerve or inside the eyeball. In one case, there could be an additional trace of contrast dye behind the orbita. Our new ultrasound-guided technique has the potential to improve safety and efficacy of the procedure by direct visualization of the needle placement and the distribution of the injected fluid. Furthermore, the precise injection near the optic nerve could lead to a reduction of the amount of the local anaesthetic needed with fewer related complications.

Weigners fixative-an alternative to formalin fixation for histology with improved preservation of nucleic acids.

PubMed

Klopfleisch, R; von Deetzen, M; Weiss, A Th; Weigner, J; Weigner, F; Plendl, J; Gruber, A D

2013-01-01

Formalin fixation and paraffin embedding (FFPE) is the standard method for tissue storage in histopathology. However, FFPE has disadvantages in terms of user health, environment, and nucleic acid integrity. Weigners fixative has been suggested as an alternative for embalming cadavers in human and veterinary anatomy. The present study tested the applicability of Weigners for histology and immunohistochemistry and the preservation of nucleic acids. To this end, a set of organs was fixed for 2 days and up to 6 months in Weigners (WFPE) or formalin. WFPE tissues from the skin, brain, lymphatic tissues, liver, and muscle had good morphologic preservation, comparable to formalin fixation. The quality of kidney and lung samples was inferior to FFPE material due to less accentuated nuclear staining and retention of proteinaceous interstitial fluids. Azan, Turnbull blue, toluidin, and immunohistochemical stainings for CD79a, cytokeratin, vimentin, and von Willebrand factor led to comparable results with both fixates. Of note, immunohistochemical detection of CD3 was possible after 6 months in WFPE but not in FFPE tissues. mRNA, miRNA, and DNA from WFPE tissues had superior quality and allowed for amplification of miRNA, 400-bp-long mRNA, and 1000-bp-long DNA fragments after 6 months of fixation in WFPE. In summary, Weigners fixative is a nonhazardous alternative to formalin, which provides a good morphologic preservation of most organs, a similar sensitivity for protein detection, and a superior preservation of nucleic acids. Weigners may therefore be a promising alternative to cryopreservation and may be embraced by people affected by formalin allergies.

Evidence for prehistoric origins of Egyptian mummification in late Neolithic burials.

PubMed

Jones, Jana; Higham, Thomas F G; Oldfield, Ron; O'Connor, Terry P; Buckley, Stephen A

2014-01-01

Traditional theories on ancient Egyptian mummification postulate that in the prehistoric period (i.e. the Neolithic and Chalcolithic periods, 5th and 4th millennia B.C.) bodies were naturally desiccated through the action of the hot, dry desert sand. Although molding of the body with resin-impregnated linen is believed to be an early Pharaonic forerunner to more complex processes, scientific evidence for the early use of resins in artificial mummification has until now been limited to isolated occurrences during the late Old Kingdom (c. 2200 B.C.), their use becoming more apparent during the Middle Kingdom (c. 2000-1600 BC). We examined linen wrappings from bodies in securely provenanced tombs (pit graves) in the earliest recorded ancient Egyptian cemeteries at Mostagedda in the Badari region (Upper Egypt). Our investigations of these prehistoric funerary wrappings using a combination of gas chromatography-mass spectrometry (GC-MS) and thermal desorption/pyrolysis (TD/Py)-GC-MS have identified a pine resin, an aromatic plant extract, a plant gum/sugar, a natural petroleum source, and a plant oil/animal fat in directly AMS-dated funerary wrappings. Predating the earliest scientific evidence by more than a millennium, these embalming agents constitute complex, processed recipes of the same natural products, in similar proportions, as those utilized at the zenith of Pharaonic mummification some 3,000 years later. The antibacterial properties of some of these ingredients and the localized soft-tissue preservation that they would have afforded lead us to conclude that these represent the very beginnings of experimentation that would evolve into the famous mummification practice of the Pharaonic period.

Evidence for Prehistoric Origins of Egyptian Mummification in Late Neolithic Burials

PubMed Central

Jones, Jana; Higham, Thomas F. G.; Oldfield, Ron; O'Connor, Terry P.; Buckley, Stephen A.

2014-01-01

Traditional theories on ancient Egyptian mummification postulate that in the prehistoric period (i.e. the Neolithic and Chalcolithic periods, 5th and 4th millennia B.C.) bodies were naturally desiccated through the action of the hot, dry desert sand. Although molding of the body with resin-impregnated linen is believed to be an early Pharaonic forerunner to more complex processes, scientific evidence for the early use of resins in artificial mummification has until now been limited to isolated occurrences during the late Old Kingdom (c. 2200 B.C.), their use becoming more apparent during the Middle Kingdom (c. 2000-1600 BC). We examined linen wrappings from bodies in securely provenanced tombs (pit graves) in the earliest recorded ancient Egyptian cemeteries at Mostagedda in the Badari region (Upper Egypt). Our investigations of these prehistoric funerary wrappings using a combination of gas chromatography-mass spectrometry (GC-MS) and thermal desorption/pyrolysis (TD/Py)-GC-MS have identified a pine resin, an aromatic plant extract, a plant gum/sugar, a natural petroleum source, and a plant oil/animal fat in directly AMS-dated funerary wrappings. Predating the earliest scientific evidence by more than a millennium, these embalming agents constitute complex, processed recipes of the same natural products, in similar proportions, as those utilized at the zenith of Pharaonic mummification some 3,000 years later. The antibacterial properties of some of these ingredients and the localized soft-tissue preservation that they would have afforded lead us to conclude that these represent the very beginnings of experimentation that would evolve into the famous mummification practice of the Pharaonic period. PMID:25118605

The anatomy of the coracohumeral ligament and its relation to the subscapularis muscle.

PubMed

Arai, Ryuzo; Nimura, Akimoto; Yamaguchi, Kumiko; Yoshimura, Hideya; Sugaya, Hiroyuki; Saji, Takahiko; Matsuda, Shuichi; Akita, Keiichi

2014-10-01

Only a few reports describe the extension of the coracohumeral ligament to the subscapularis muscle. The purposes of this study were to histo-anatomically examine the structure between the ligament and subscapularis and to discuss the function of the ligament. Nineteen intact embalmed shoulders were used. In 9 shoulders, the expansion of the ligament was anatomically observed, and in 6 of these 9, the muscular tissue of the supraspinatus and subscapularis was removed to carefully examine the attachments to the tendons of these muscles. Five shoulders were frozen and sagittally sectioned into 3-mm-thick slices. After observation, histologic analysis was performed on 3 of these shoulders. In the remaining 5 shoulders, the coracoid process was harvested to investigate the ligament origin. The coracohumeral ligament originated from the horizontal limb and base of the coracoid process and enveloped the cranial part of the subscapularis muscle. The superficial layer of the ligament covered a broad area of the anterior surface of the muscle. Laterally, it protruded between the long head of the biceps tendon and subscapularis and attached to the tendinous floor, which extended from the subscapularis insertion. Histologically, the ligament consisted of irregular and sparse fibers abundant in type III collagen. The coracohumeral ligament envelops the whole subscapularis muscle and insertion and seems to function as a kind of holder for the subscapularis and supraspinatus muscles. The ligament is composed of irregular and sparse fibers and contains relatively rich type III collagen, which would suggest flexibility. Copyright © 2014 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

The fascicular anatomy and peak force capabilities of the sternocleidomastoid muscle.

PubMed

Kennedy, Ewan; Albert, Michael; Nicholson, Helen

2017-06-01

The fascicular morphology of the sternocleidomastoid (SCM) is not well described in modern anatomical texts, and the biomechanical forces it exerts on individual cervical motion segments are not known. The purpose of this study is to investigate the fascicular anatomy and peak force capabilities of the SCM combining traditional dissection and modern imaging. This study is comprised of three parts: Dissection, magnetic resonance imaging (MRI) and biomechanical modelling. Dissection was performed on six embalmed cadavers: three males of age 73-74 years and three females of age 63-93 years. The fascicular arrangement and morphologic data were recorded. MRIs were performed on six young, healthy volunteers: three males of age 24-37 and three females of age 26-28. In vivo volumes of the SCM were calculated using the Cavalieri method. Modelling of the SCM was performed on five sets of computed tomography (CT) scans. This mapped the fascicular arrangement of the SCM with relation to the cervical motion segments, and used volume data from the MRIs to calculate realistic peak force capabilities. Dissection showed the SCM has four parts; sterno-mastoid, sterno-occipital, cleido-mastoid and cleido-occipital portions. Force modelling shows that peak torque capacity of the SCM is higher at lower cervical levels, and minimal at higher levels. Peak shear forces are higher in the lower cervical spine, while compression is consistent throughout. The four-part SCM is capable of producing forces that vary across the cervical motion segments. The implications of these findings are discussed with reference to models of neck muscle function and dysfunction.

Anatomy and biomechanics of gluteus maximus and the thoracolumbar fascia at the sacroiliac joint.

PubMed

Barker, P J; Hapuarachchi, K S; Ross, J A; Sambaiew, E; Ranger, T A; Briggs, C A

2014-03-01

Biomechanical models predict that recruitment of gluteus maximus (GMax) will exert a compressive force across the sacroiliac joint (SIJ), yet this muscle requires morphologic assessment. The aims of this study were to document GMax's proximal attachments and assess their capacity to generate forces including compressive force at the SIJ. In 11 embalmed cadaver limbs, attachments of GMax crossing the SIJ were dissected and their fascicle orientation, length and attachment volume documented. The physiological cross-sectional area (PCSA) of each attachment was calculated along with its estimated maximum force at the SIJ and lumbar spine. GMax fascicles originated from the gluteus medius fascia, ilium, thoracolumbar fascia, erector spinae aponeurosis, sacrum, coccyx, dorsal sacroiliac and sacrotuberous ligaments in all specimens. Their mean fascicle orientation ranged from 32 to 45° below horizontal and mean length from 11 to 18 cm. The mean total PCSA of GMax was 26 cm(2) (range 16-36), of which 70% crossed the SIJ. The average maximum force predicted to be generated by GMax's total attachments crossing each SIJ was 891 N (range 572-1,215), of which 70% (702 N: range 450-1,009) could act perpendicular to the plane of the SIJ. The capacity of GMax to generate an extensor moment at lower lumbar segments was estimated at 4 Nm (range 2-9.5). GMax may generate compressive forces at the SIJ through its bony and fibrous attachments. These may assist effective load transfer between lower limbs and trunk. Copyright © 2013 Wiley Periodicals, Inc.

A Cadaveric Study on Sacroiliac Joint Injection

PubMed Central

Zou, Yu-Cong; Li, Yi-Kai; Yu, Cheng-Fu; Yang, Xian-Wen; Chen, Run-Qi

2015-01-01

The scope of this study was to explore the possibility as well as the feasibility of sacroiliac joint injection following simple X-ray clip location. For the cadaveric study, 10 fixed sacroiliac joint (SIJ) sectional specimens, 4 dried cadaveric pelvises and 21 embalmed adult cadaveric pelvises were dissected, followed by an injection of contrast agent into the joint. The irrigation of the agent was observed through CT scanning. For the radiologic study, 188 CT scans of ankylosing spondylitis patients (143 male, 45 female) were collected from 2010 to 2012, in Nanfang Hospital. What was measured was (1) Distance between the posterior midline and sagittal synovium; (2) Length of the sagittal synovium; (3) Distance between the midpoint of the sagittal synovium and posterior superior iliac spine; and (4) Distance between the superficial skin vertical to the sagittal synovium point were measured. For the practice-based study: 20 patients (17 males and 3 females) with early ankylosing spondylitis, from Nanfang Hospital affiliated with Southern Medical University were recruited, and sacroiliac joint unguided injections were done on the basis of the cadaveric and radiologic study. Only the inferior 1/3rd portion parallel to the posterior midline could be injected into since the superior 2/3rd portion were filled with interosseous ligaments. Thirteen of the 20 patients received successful injections as identified by CT scan using the contrast agent. Sacroiliac joint injection following simple X-ray clip location is possible and feasible if the operation is performed by trained physicians familiar with the sacroiliac joint and its surrounding anatomic structures. PMID:25692437

Vascular patterns of upper limb: an anatomical study with accent on superficial brachial artery

PubMed Central

Kachlik, David; Konarik, Marek; Baca, Vaclav

2011-01-01

The aim of the study was to evaluate the terminal segmentation of the axillary artery and to present four cases of anomalous branching of the axillary artery, the superficial brachial artery (arteria brachialis superficialis), which is defined as the brachial artery that runs superficially to the median nerve. Totally, 130 cadaveric upper arms embalmed by classical formaldehyde technique from collections of the Department of Anatomy, Third Faculty of Medicine, Charles University in Prague, were macroscopically dissected with special focus on the branching arrangement of the axillary artery. The most distal part of the axillary artery (infrapectoral part) terminated in four cases as a bifurcation into two terminal branches: the superficial brachial artery and profunda brachii artery, denominated according to their relation to the median nerve. The profunda brachii artery primarily gave rise to the main branches of the infrapectoral part of the axillary artery. The superficial brachial artery descended to the cubital fossa where it assumed the usual course of the brachial artery in two cases and in the other two cases its branches (the radial and ulnar arteries) passed superficially to the flexors. The incidence of the superficial brachial artery in our study was 5% of cases. The reported incidence is a bit contradictory, from 0.12% to 25% of cases. The anatomical knowledge of the axillary region is of crucial importance for neurosurgeons and specialists using the radiodiagnostic techniques, particularly in cases involving traumatic injuries. The improved knowledge would allow more accurate diagnostic interpretations and surgical treatment. PMID:21342134

The right intercostobronchial trunk: anatomical study in respect of posterior intercostal artery origin and its clinical application.

PubMed

Kocbek, Lidija; Rakuša, Mateja

2018-01-01

The right bronchial artery usually arises from the descending thoracic aorta as a common trunk with the right intercostal artery and forms the right intercostobronchial trunk. Both, the third right posterior intercostal artery and the right intercostobronchial trunk, are described as the most constant vessels. The focus of the study was to determine the characteristics of the right intercostobronchial trunk regarding the origins of the posterior intercostal arteries from the thoracic aorta. Posterior intercostal arteries and the right bronchial arteries were dissected in 43 human cadavers, preserved after Thiel's embalming method with intraarterial infusion of red colored latex. Postmortem examination gave valued information on the right intercostobronchial trunk present in 58% of cases. The right intercostobronchial trunk was mapped and new classification regarding the origin of the posterior intercostal arteries from the thoracic aorta suggested type A, B and C, the latter ones into subtypes 1 and 2. Type A was proportional to the origin level of the PIA and its corresponding intercostal space. Size of outer diameter at the origin did not indicate the right bronchial artery branch. In subtype 2 of type B the proximal posterior intercostal artery diameter that gave off right bronchial artery was thicker than distal one. The right bronchial artery originates from the second to the fifth posterior intercostal artery forming the right intercostobronchial trunk. Various origin and types of origin, diameter and course of the right intercostobronchial trunk described and analyzed in the study offer valuable information on the procedures involving the right intercostobronchial trunk.

History of attitudes toward death: a comparative study between Persian and western cultures.

PubMed

Aramesh, Kiarash

2016-01-01

In his seminal book on the historical periods of Western attitudes toward death, Philippe Aries describes four consecutive periods through which these attitudes evolved and transformed. According to him, the historical attitudes of Western cultures have passed through four major parts described above: "Tamed Death," One's Own Death," "Thy Death," and "Forbidden Death." This paper, after exploring this concept through the lens of Persian Poetic Wisdom, concludes that he historical attitudes of Persian-speaking people toward death have generally passed through two major periods. The first period is an amalgamation of Aries' "Tamed Death" and "One's Own Death" periods, and the second period is an amalgamation of Aries' "Thy Death" and "Forbidden Death" periods. This paper explores the main differences and similarities of these two historical trends through a comparative review of the consecutive historical periods of attitudes toward death between the Western and Persian civilizations/cultures. Although both civilizations moved through broadly similar stages, some influential contextual factors have been very influential in shaping noteworthy differences between them. The concepts of after-death judgment and redemption/downfall dichotomy and practices like deathbed rituals and their evolution after enlightenment and modernity are almost common between the above two broad traditions. The chronology of events and some aspects of conceptual evolutions (such as the lack of the account of permanent death of nonbelievers in the Persian tradition) and ritualistic practices (such as the status of the tombs of Shiite Imams and the absolute lack of embalming and wake in the Persian/Shiite culture) are among the differences.

Preparing medical students for obstetrics and gynecology milestone level one: a description of a pilot curriculum

PubMed Central

Morgan, Helen; Marzano, David; Lanham, Michael; Stein, Tamara; Curran, Diana; Hammoud, Maya

2014-01-01

Background The implementation of the Accreditation Council for Graduate Medical Education (ACGME) Milestones in the field of obstetrics and gynecology has arrived with Milestones Level One defined as the level expected of an incoming first-year resident. Purpose We designed, implemented, and evaluated a 4-week elective for fourth-year medical school students, which utilized a multimodal approach to teaching and assessing the Milestones Level One competencies. Methods The 78-hour curriculum utilized traditional didactic lectures, flipped classroom active learning sessions, a simulated paging curriculum, simulation training, embalmed cadaver anatomical dissections, and fresh-frozen cadaver operative procedures. We performed an assessment of student knowledge and surgical skills before and after completion of the course. Students also received feedback on their assessment and management of eight simulated paging scenarios. Students completed course content satisfaction surveys at the completion of each of the 4 weeks. Results Students demonstrated improvement in knowledge and surgical skills at the completion of the course. Paging confidence trended toward improvement at the completion of the course. Student satisfaction was high for all of the course content, and the active learning components of the curriculum (flipped classroom, simulation, and anatomy sessions) had higher scores than the traditional didactics in all six categories of our student satisfaction survey. Conclusions This pilot study demonstrates a practical approach for preparing fourth-year medical students for the expectations of Milestones Level One in obstetrics and gynecology. This curriculum can serve as a framework as medical schools and specific specialties work to meet the first steps of the ACGME's Next Accreditation System. PMID:25430640

Stent Design Affects Femoropopliteal Artery Deformation.

PubMed

MacTaggart, Jason; Poulson, William; Seas, Andreas; Deegan, Paul; Lomneth, Carol; Desyatova, Anastasia; Maleckis, Kaspars; Kamenskiy, Alexey

2018-03-23

Poor durability of femoropopliteal artery (FPA) stenting is multifactorial, and severe FPA deformations occurring with limb flexion are likely involved. Different stent designs result in dissimilar stent-artery interactions, but the degree of these effects in the FPA is insufficiently understood. To determine how different stent designs affect limb flexion-induced FPA deformations. Retrievable markers were deployed into n = 28 FPAs of lightly embalmed human cadavers. Bodies were perfused and CT images were acquired with limbs in the standing, walking, sitting, and gardening postures. Image analysis allowed measurement of baseline FPA foreshortening, bending, and twisting associated with each posture. Markers were retrieved and 7 different stents were deployed across the adductor hiatus in the same limbs. Markers were then redeployed in the stented FPAs, and limbs were reimaged. Baseline and stented FPA deformations were compared to determine the influence of each stent design. Proximal to the stent, Innova, Supera, and SmartFlex exacerbated foreshortening, SmartFlex exacerbated twisting, and SmartControl restricted bending of the FPA. Within the stent, all devices except Viabahn restricted foreshortening; Supera, SmartControl, and AbsolutePro restricted twisting; SmartFlex and Innova exacerbated twisting; and Supera and Viabahn restricted bending. Distal to the stents, all devices except AbsolutePro and Innova exacerbated foreshortening, and Viabahn, Supera, Zilver, and SmartControl exacerbated twisting. All stents except Supera were pinched in flexed limb postures. Peripheral self-expanding stents significantly affect limb flexion-induced FPA deformations, but in different ways. Although certain designs seem to accommodate some deformation modes, no device was able to match all FPA deformations.

Surgical anatomy and morphologic variations of umbilical structures.

PubMed

Fathi, Amir H; Soltanian, Hooman; Saber, Alan A

2012-05-01

The umbilicus is the main access route to the abdominal cavity in laparoscopic surgeries. However, its anatomical configuration is rarely studied in the surgical and anatomical literature. With introduction of laparoendoscopic single-site surgery and considering the significant number of primary and postoperative umbilical hernias, we felt the necessity to comprehensively study the umbilical structures and analyze their protective function against hernias. Twenty-four embalmed cadavers were studied in the anatomy laboratory of Case Western Reserve University. Round hepatic, median and medial ligaments, umbilical ring, umbilical and umbilicovesicular fasciae, and pattern of attachment to the ring were dissected and measured. Mean age was 82.1 years, ranging between 56 and 96 years, with a male-to-female ratio of 1.4:1. Ninety-two per cent was white and 8 per cent black adults. According to shape and attachment pattern of ligaments, umbilical ring is classified into five types. Hernia incidence was 25 per cent. All hernia cases lacked the umbilical fascia and the round hepatic ligament was not attached to the inferior border of the ring. The umbilical ring and its morphologic relation with adjacent ligaments are described and classified into five types. In contrary to sparse existing literature, we propose that umbilical fascia is continuation and condensation of umbilicovesicular rather than transversalis fascia. It was absent in cadavers forming conjoined median and medial ligaments with a single insertion site to the ring. Round ligament insertion to the inferior border of the ring provides another protective factor. These two protective measures were absent in all the observed umbilical hernias.

Biomechanical comparison of fixation methods in transverse patella fractures.

PubMed

Scilaris, T A; Grantham, J L; Prayson, M J; Marshall, M P; Hamilton, J J; Williams, J L

1998-01-01

To compare monofilament wire versus braided cable for stabilizing transverse patella fractures using the modified AO tension band technique. A randomized blocked (paired) study comparing two fixation methods. Statistical analysis was performed using a nested repeated measures analysis, followed by Bonferroni post hoc testing. Seven paired embalmed knees (mean age 71.8 years, SD 14.6 years) were dissected, and transverse fractures were simulated. The knees were reduced and randomly fixed by either two parallel 0.062-inch Kirschner wires with a 1.0-millimeter-diameter 316L stainless steel monofilament wire tension loop or two Kirschner wires with a 1.0-millimeter-diameter 316L stainless steel braided cable tension loop. Knees were tested by applying a cyclic load through the suprapatellar tendon between twenty and 300 newtons for thirty cycles. The maximum fracture displacement increased with each cycle of loading for both the braided cable and monofilament wire tension loop configurations (p = 0.0001). The average peak displacement at the thirtieth cycle was 2.25 millimeters for monofilament wire and 0.73 millimeters for the cable. When comparing both methods for all cycles, the braided cable allowed less fracture displacement than did the monofilament wire (p = 0.002), and the rate of increase per cycle of maximum fracture displacement was less for the cable than for the wire (p = 0.0001). In transverse, noncomminuted patella fractures, fixation with two Kirschner wires and a 1.0-millimeter braided cable tension loop was superior to the monofilament wire tension loop. Most importantly, the braided cable afforded more predictable results during cyclic loading.

Dead sea asphalts: historical aspects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nissenbaum, A.

1978-05-01

Asphalts are present in the Dead Sea basin in three forms: (1) huge blocks, up to 100 tons in weight, composed of extremely pure (>99.99%) solid asphalt occasionally found floating on the lake, (2) veins, seepages, and cavity and fissure fillings in Lower Cretaceous to Holocene rocks, and (3) ozocerite veins on the eastern shore of the lake. Dead Sea asphalts probably have been documented over a longer period of time than any other hydrocarbon deposit--from antiquity to the 19th century. Major uses of asphalt from the Dead Sea have been as an ingredient in the embalming process, for medicinalmore » purposes, for fumigation, and for agriculture. The first known war for control of a hydrocarbon deposit was in the Dead Sea area in 312 B.C. between the Seleucid Syrians and the Nabatean Arabs who lived around the lake. Surface manifestations of asphalt are linked closely to tectonic activity. In the lake itself, the asphalt is associated with diapirs During certain historic periods, tectonic and diapiric activity caused frequent liberation to the Dead Sea surface of semiliquid asphalt associated with large amounts of hydrogen sulfide gas. When the tectonic activity was attenuated, as in the 19th and 20th centuries, the rate of asphalt seepage to the bottom sediments of the Dead Sea was much slower and the asphalt solidified on the lake bottom. The release of asphalt to the surface became much more sporadic, and may have resulted in part from earthquakes. Thus, future asphalt prospecting in the Dead Sea area should be conducted along the boundaries of diapirs or their associated faults.« less

Monoaxial external fixation of the calcaneus: An anatomical study assessing the safety of monoaxial pin insertion.

PubMed

Thomson, Callum M; Esparon, Tom; Rea, Paul M; Jamal, Bilal

2016-10-01

The use of external fixation for intra-articular calcaneal fractures is increasing in popularity. Studies have shown fine wire and monoaxial external fixation to be a viable surgical alternative to more invasive methods of open reduction and internal fixation of the calcaneus. However, there is an absence of literature that quantifies the risk of pin insertion for monoaxial fixation. This study aimed to determine the safety of inserting monoaxial pins within the calcaneus to house the Orthofix Calcaneal Mini-Fixator. Five formalin embalmed cadaveric ankle and lower leg specimens were inserted with six monoaxial pins. Careful dissection then revealed the presence of the tendons of peroneus longus and brevis, the sural nerve and the small saphenous vein in relation to these pins. Measurements from each pin to each of these structures were made as the structures transected lines drawn from each pin to two palpable bony landmarks: the inferior tip of the lateral malleolus and the posterosuperior calcaneus. In doing this, the risk posed by each pin could be evaluated. We found that two particular pins, those used to hold the articular surface of the subtalar joint in a reduced position, posed a larger risk of injury to surrounding structures than the remaining pins. These findings therefore suggest that monoaxial fixation of the calcaneus using a six pin approach is a relatively safe method of rectifying calcaneal fractures and thus may serve as a welcome alternative to other methods of calcaneal fixation. Copyright © 2016 Elsevier Ltd. All rights reserved.

Nerve supply of the subscapularis during anterior shoulder surgery: definition of a potential risk area.

PubMed

Leschinger, Tim; Hackl, Michael; Zeifang, Felix; Scaal, Martin; Müller, Lars Peter; Wegmann, Kilian

2017-01-01

The purpose of the study was to evaluate the position of the subscapular nerves relative to surgical landmarks during exposure and to analyze the pattern of innervation of the subscapularis to avoid injury during anterior shoulder surgery. 20 embalmed human cadaveric shoulder specimens were used in the study. The muscular insertions of the subscapular nerves were marked and their closest branches to the musculotendinous junction and the coracoid process were measured in horizontal and vertical distances. In addition, the innervation pattern of each specimen was documented. 14/20 specimens showed an innervation of the subscapularis with an upper, middle and lower subscapular nerve branch. Even though the nerve branches were in average more than 2 cm medial to the musculotendinous junction, minimal distances of 1.1-1.3 cm were found. The mean vertical distance as measured from the medial base of the coracoid to the nerve innervation point into the muscle was 0.7 cm for the upper nerve branch, 2.2 cm for the middle nerve branch and 4.4 cm for the lower nerve branch. The subscapularis has a variable nerve supply, which increases the risk of muscle denervation during open shoulder surgery. Dissection or release should be avoided at the anterior aspect of the subscapularis muscle more than 1 cm medial to the musculotendinous junction. In approaches with a horizontal incision of the subscapularis, splitting should be performed at a vertical distance of 3.2-3.6 cm to the coracoid base to avoid iatrogenic subscapular nerve injuries.

A composite gluteofemoral flap for reconstruction of large pressure sores over the sacrococcygeal region.

PubMed

Xie, Yun; Zhuang, Yue-Hong; Xue, Lan; Zheng, He-Ping; Lin, Jian-Hua

2015-12-01

Gigantic pressure sores pose a daunting challenge for plastic surgeons. This paper presents a composite gluteofemoral flap for reconstruction of large pressure sores over the sacrococcygeal region. In this anatomical study, 30 embalmed cadaveric lower limbs were used for dissection to observe the musculocutaneous perforators of the inferior gluteal artery and the longitudinal nutritional vascular chain of the posterior femoral cutaneous nerve. In this clinical study, eight patients underwent surgical harvest of the composite gluteofemoral flap for coverage of grade IV sacrococcygeal pressure sores. The size of the pressure sores ranged between 16 × 9 cm and 22 × 10 cm. The inferior gluteal artery was present in 26 cases and absent in four cases. It gave off two to four musculocutaneous branches with a diameter larger than 0.5 mm to the gluteus maximus. A direct cutaneous branch was given off at the inferior margin of the gluteus maximus, serving as a nutritional artery for the posterior femoral cutaneous nerve. The size of the flap harvested ranged between 22 × 9 cm and 32 × 10 cm. Flaps in seven patients survived uneventfully and developed epidermal necrosis at the distal margin in one case. An average 2-year follow-up revealed no recurrence of pressure sores. The composite gluteofemoral flap, being robust in blood supply, simple in surgical procedure, and large in donor territory, is an important addition to the armamentarium. Copyright © 2015 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Anatomical study of the articular branches innervated the hip and knee joint with reference to mechanism of referral pain in hip joint disease patients.

PubMed

Sakamoto, Junya; Manabe, Yoshitaka; Oyamada, Joichi; Kataoka, Hideki; Nakano, Jiro; Saiki, Kazunobu; Okamoto, Keishi; Tsurumoto, Toshiyuki; Okita, Minoru

2018-07-01

Referred pain in the anterior knee joint is the most common symptom in hip disease patients. The development of referred pain is considered to be related to dichotomizing peripheral sensory fibers. However, no gross anatomical findings identify any dichotomizing fibers innervating both the hip and knee joints. We dissected the femoral and obturator nerves in human cadavers to investigate the distribution of the articular branches in the hip and knee joints. Fourteen embalmed left lower limbs from 14 Japanese adult cadavers (five from females, nine from males, average age 73.8 ± 14.1 years) were observed macroscopically. The articular branches of the femoral and obturator nerves were dissected at the anterior margin of the groin toward the thigh region. After dissections of the articular nerves of the hip joints, the femoral and obturator nerves were exposed from proximally to distally to identify the articular nerves of the knee joints. The branching pattern of the articular branches in the hip and knee joints was recorded. In six of 14 limbs (42.9%), the femoral nerve supplied articular branches to the anteromedial aspect of both the hip and knee joints. These articular branches were derived from the same bundle of femoral nerve. These gross anatomical findings suggested that dichotomizing peripheral sensory fibers innervate the hip and knee joints and these could relate to the referred pain confirmed in the anterior knee joints of patients with hip disease. Clin. Anat. 31:705-709, 2018. © 2018 Wiley Periodicals, Inc. © 2018 Wiley Periodicals, Inc.

Cadaveric Study of the Articular Branches of the Shoulder Joint.

PubMed

Eckmann, Maxim S; Bickelhaupt, Brittany; Fehl, Jacob; Benfield, Jonathan A; Curley, Jonathan; Rahimi, Ohmid; Nagpal, Ameet S

This cadaveric study investigated the anatomic relationships of the articular branches of the suprascapular (SN), axillary (AN), and lateral pectoral nerves (LPN), which are potential targets for shoulder analgesia. Sixteen embalmed cadavers and 1 unembalmed cadaver, including 33 shoulders total, were dissected. Following dissections, fluoroscopic images were taken to propose an anatomical landmark to be used in shoulder articular branch blockade. Thirty-three shoulders from 17 total cadavers were studied. In a series of 16 shoulders, 16 (100%) of 16 had an intact SN branch innervating the posterior head of the humerus and shoulder capsule. Suprascapular sensory branches coursed laterally from the spinoglenoid notch then toward the glenohumeral joint capsule posteriorly. Axillary nerve articular branches innervated the posterolateral head of the humerus and shoulder capsule in the same 16 (100%) of 16 shoulders. The AN gave branches ascending circumferentially from the quadrangular space to the posterolateral humerus, deep to the deltoid, and inserting at the inferior portion of the posterior joint capsule. In 4 previously dissected and 17 distinct shoulders, intact LPNs could be identified in 14 (67%) of 21 specimens. Of these, 12 (86%) of 14 had articular branches innervating the anterior shoulder joint, and 14 (100%) of 14 LPN articular branches were adjacent to acromial branches of the thoracoacromial blood vessels over the superior aspect of the coracoid process. Articular branches from the SN, AN, and LPN were identified. Articular branches of the SN and AN insert into the capsule overlying the glenohumeral joint posteriorly. Articular branches of the LPN exist and innervate a portion of the anterior shoulder joint.

Study of the three-dimensional orientation of the labrum: its relations with the osseous acetabular rim

PubMed Central

Bonneau, Noémie; Bouhallier, July; Baylac, Michel; Tardieu, Christine; Gagey, Olivier

2012-01-01

Understanding the three-dimensional orientation of the coxo-femoral joint remains a challenge as an accurate three-dimensional orientation ensure an efficient bipedal gait and posture. The quantification of the orientation of the acetabulum can be performed using the three-dimensional axis perpendicular to the plane that passes along the edge of the acetabular rim. However, the acetabular rim is not regular as an important indentation in the anterior rim was observed. An innovative cadaver study of the labrum was developed to shed light on the proper quantification of the three-dimensional orientation of the acetabulum. Dissections on 17 non-embalmed corpses were performed. Our results suggest that the acetabular rim is better represented by an anterior plane and a posterior plane rather than a single plane along the entire rim as it is currently assumed. The development of the socket from the Y-shaped cartilage was suggested to explain the different orientations in these anterior and posterior planes. The labrum forms a plane that takes an orientation in between the anterior and posterior parts of the acetabular rim, filling up inequalities of the bony rim. The vectors VL, VA2 and VP, representing the three-dimensional orientation of the labrum, the anterior rim and the posterior rim, are situated in a unique plane that appears biomechanically dependent. The three-dimensional orientation of the acetabulum is a fundamental parameter to understand the hip joint mechanism. Important applications for hip surgery and rehabilitation, as well as for physical anthropology, were discussed. PMID:22360458

Ultrasound imaging of the thenar motor branch of the median nerve: a cadaveric study.

PubMed

Petrover, David; Bellity, Jonathan; Vigan, Marie; Nizard, Remy; Hakime, Antoine

2017-11-01

Anatomic variations of the median nerve (MN) increase the risk of iatrogenic injury during carpal tunnel release surgery. We investigated whether high-frequency ultrasonography could identify anatomic variations of the MN and its thenar motor branch (MBMN) in the carpal tunnel. For each volar wrist of healthy non-embalmed cadavers, the type of MN variant (Lanz classification), course and orientation of the MBMN, and presence of hypertrophic muscles were scored by 18-MHz ultrasound and then by dissection. MBMN was identified by ultrasound in all 30 wrists (15 subjects). By dissection, type 1, 2 and 3 variants were found in 84%, 3%, and 13% of wrists, respectively. Ultrasound had good agreement with dissection in identifying the variant type (kappa =0.9). With both techniques, extra-, sub-, and transligamentous courses were recorded in 65%, 31%, and 4% of cases, respectively. With both techniques, the bifid nerve, hypertrophic muscles, and bilateral symmetry for variant type were identified in 13.3%, 13.3%, and 86.7% of wrists, respectively. Agreement between ultrasound and dissection was excellent for the MBMN course and orientation (kappa =1). Ultrasound can be used reliably to identify anatomic variations of the MN and MBMN. It could be a useful tool before carpal tunnel release surgery. • Ultrasound can identify variations of the motor branch of the median nerve. • Ultrasound mapping should be used prior to carpal tunnel release surgery. • All sub-, extra-, and transligamentous courses were accurately identified. • Type 3 variants (bifid nerve), hypertrophic muscles, and bilateral symmetry were accurately identified.

Occupational exposure to formaldehyde and alterations in lymphocyte subsets

PubMed Central

Hosgood, H. Dean; Zhang, Luoping; Tang, Xiaojiang; Vermeulen, Roel; Hao, Zhenyue; Shen, Min; Qiu, Chuangyi; Ge, Yichen; Hua, Ming; Ji, Zhiying; Li, Senhua; Xiong, Jun; Reiss, Boris; Liu, Songwang; Xin, Kerry X.; Azuma, Mariko; Xie, Yuxuan; Freeman, Laura Beane; Ruan, Xiaolin; Guo, Weihong; Galvan, Noe; Blair, Aaron; Li, Laiyu; Huang, Hanlin; Smith, Martyn T.; Rothman, Nathaniel; Lan, Qing

2012-01-01

Background Formaldehyde is used in many occupational settings, most notably in manufacturing, health care, and embalming. Formaldehyde has been classified as a human carcinogen, but its mechanism of action remains uncertain. Methods We carried out a cross-sectional study of 43 formaldehyde exposed-workers and 51 unexposed age and sex-matched controls in Guangdong, China to study formaldehyde’s early biologic effects. To follow-up our previous report that the total lymphocyte count was decreased in formaldehyde-exposed workers compared to controls, we evaluated each major lymphocyte subset (i.e., CD4+ T cells, CD8+ T cells, natural killer (NK) cells, and B cells) and T cell lymphocyte subset (CD4+ naïve and memory T cells, CD8+ naïve and memory T cells, and regulatory T cells). Linear regression of each subset was used to test for differences between exposed workers and controls, adjusting for potential confounders. Results Total NK cell and T cell counts were about 24% (p=0.037) and 16% (p=0.0042) lower, respectively, among exposed workers. Among certain T cell subsets, decreased counts among exposed workers were observed for CD8+ T cells (p=0.026), CD8+ effector memory T cells (p=0.018), and regulatory T cells (CD4+FoxP3+: p=0.04; CD25+FoxP3+: p=0.008). Conclusions Formaldehyde exposed-workers experienced decreased counts of NK cells, regulatory T cells, and CD8+ effector memory T cells; however, due to the small sample size these findings need to be confirmed in larger studies. PMID:22767408

Development of surgical skill with singular neurectomy using human cadaveric temporal bones.

PubMed

Feigl, Georg; Kos, Izabel; Anderhuber, Friedrich; Guyot, Jean Phillippe; Fasel, Jean

2008-01-01

Profound anatomical knowledge and surgical experience are essential for safe otological surgery. The surgeon's learning curve is evaluated in performing Gacek's singular neurectomy on cadaveric specimens. One otological surgeon performed Gacek's approach on 96 halves of human heads embalmed according to Thiel's method, divided into four groups (24 halves per group) and evaluated them concurrent to the evaluation of an anatomist after a first surgical attempt. Successful operations were subdivided into "direct hits" of the osseous canal of the posterior ampullary nerve also known as the singular nerve and "indirect hits" with access to the posterior ampullary recess. Unsuccessful operations showed "no hit" of the nerve without lesion of the membranous labyrinth. "Indirect" or "no hits" were reinvestigated in a second attempt to evaluate possible reclassifications due to a learning process of the surgeon. The order of dissection, the rate of success and the changes of results in correlation with the numbers of dissected specimens were documented. The success rate significantly increased from 54.2% direct hits after the first group to 87.36% in the fourth group after the first attempt. Successful operations were performed in 86.5% after completion of the first attempt and 97.9% after the second attempt. The number of new allocations decreased from 11 cases in the first group of dissected specimens to zero in the fourth group. This paper strengthens the value of cadaveric training for surgeons and the crucial role of dissection of a large number of specimens in improvement of the surgeon's experience and success rate.

Fiber types of the anterior and lateral cervical muscles in elderly males.

PubMed

Cornwall, Jon; Kennedy, Ewan

2015-09-01

The anterior and lateral cervical muscles (ALCM) are generally considered to be postural, yet few studies have investigated ALCM fiber types to help clarify the function of these muscles. This study aimed to systematically investigate ALCM fiber types in cadavers. Anterior and lateral cervical muscles (four scalenus anterior, medius, posterior muscles; five longus colli, five longus capitis taken bilaterally from one cadaver) were removed from four male embalmed cadavers (mean age 87.25 years). Paraffin-embedded specimens were sectioned then stained immunohistochemically to identify type I and II skeletal muscle fibers. Proportional fiber type numbers and cross-sectional area (CSA) occupied by fiber types were determined using stereology (random systematic sampling). Results were analyzed using ANOVA (P < 0.05) and descriptive statistics. Scalenus anterior had the greatest average number and CSA of type I fibers (71.9 and 83.7%, respectively); longus capitis had the lowest number (48.5%) and CSA (61.4%). All scalene muscles had significantly greater type I CSA than longus capitis and longus colli; scalenus anterior and medius had significantly greater type I numbers than longus capitis and longus colli. Some significant differences were observed between individual cadavers in longus colli for CSA, and longus capitis for number. The ALCM do not share a common functional fiber type distribution, although similar fiber type distributions are shared by longus colli and longus capitis, and by the scalene muscles. Contrary to conventional descriptions, longus colli and longus capitis have type I fiber proportions indicative of postural as well as phasic muscle function.

Innervation pattern of the suprascapular nerve within supraspinatus: a three-dimensional computer modeling study.

PubMed

Hermenegildo, J A; Roberts, S L; Kim, S Y

2014-05-01

The relationship between the innervation pattern of the suprascapular nerve (SSN) and the muscle architecture of supraspinatus has not been thoroughly investigated. The supraspinatus is composed of two architecturally distinct regions: anterior and posterior. Each of these regions is further subdivided into three parts: superficial, middle and deep. The purpose of this study was to investigate the course of the SSN throughout the volume of supraspinatus and to relate the intramuscular branches to the distinct regions and parts of the supraspinatus. The SSN was dissected in thirty formalin embalmed cadaveric specimens and digitized throughout the muscle volume in six of those specimens. The digitized data were modeled using Autodesk(®) Maya(®) 2011. The three-dimensional (3D) models were used to relate the intramuscular innervation pattern to the muscle and tendon architecture defined by Kim et al. (2007, Clin Anat 20:648-655). The SSN bifurcated into two main trunks: medial and lateral. All parts of the anterior region were predominantly innervated by the medial trunk and its proximal and medial branches, whereas all parts of the posterior region predominantly by the lateral trunk and its posterolateral and/or posteromedial branches. The posterior region also received innervation from the proximal branch of the medial trunk in half of the specimens. These findings provide evidence that the anterior and posterior regions are distinct with respect to their innervation. The 3D map of the innervation pattern will aid in planning future clinical studies investigating muscle activation patterns and provide insight into possible injury of the nerve with supraspinatus pathology and surgical techniques. Copyright © 2013 Wiley Periodicals, Inc.

The utility of cadaver-based approaches for the teaching of human anatomy: A survey of British and Irish anatomy teachers.

PubMed

Balta, Joy Y; Cronin, Michael; Cryan, John F; O'Mahony, Siobhain M

2017-03-01

Utilizing reality anatomy such as dissection and demonstrating using cadavers has been described as a superior way to create meaning. The chemicals used to embalm cadavers differentially alter the tissue of the human body, which has led to the usage of different processes along the hard to soft-fixed spectrum of preserved cadavers. A questionnaire based approach was used to gain a better insight into the opinion of anatomists on the use of preserved cadavers for the teaching of human anatomy. This study focused on anatomy teachers in the United Kingdom and Ireland. From the 125 participating anatomists, 34.4% were medically qualified, 30.4% had a PhD in a non-anatomical science and 22.4% had a PhD in an anatomical science, these figures include ten anatomists who had combinations of MD with the two other PhD qualifications. The main findings from the questionnaire were that 61.6% of participants agreed that hard-fixed formalin cadavers accurately resemble features of a human body whereas 21.6% disagreed. Moreover, anatomists rated the teaching aids on how accurately they resemble features of the human body as follows: plastic models the least accurate followed by plastinated specimens, hard fixed cadavers; soft preserved cadavers were considered to be the most accurate when it comes to resembling features of the human body. Though anatomists considered soft preserved cadavers as the most accurate tool, further research is required in order to investigate which techniques or methods provide better teaching tool for a range of anatomical teaching levels and for surgical training. Anat Sci Educ 10: 137-143. © 2016 American Association of Anatomists. © 2016 American Association of Anatomists.

Neuromuscular partitioning in the extensor carpi radialis longus and brevis based on intramuscular nerve distribution patterns: A three-dimensional modeling study.

PubMed

Ravichandiran, Mayoorendra; Ravichandiran, Nisanthini; Ravichandiran, Kajeandra; McKee, Nancy H; Richardson, Denyse; Oliver, Michele; Agur, Anne M

2012-04-01

Differential activation of specific regions within a skeletal muscle has been linked to the presence of neuromuscular compartments. However, few studies have investigated the extra- or intramuscular innervation throughout the muscle volume of extensor carpi radialis longus (ECRL) and brevis (ECRB). The aim of this study was to determine the presence of neuromuscular partitions in ECRL and ECRB based on the extra- and intramuscular innervation using three-dimensional modeling. The extra- and intramuscular nerve distribution was digitized and reconstructed in 3D in all the muscle volumes using Autodesk Maya in seven formalin embalmed cadaveric specimens (mean age, 75.7 ± 15.2 years). The intramuscular nerve distribution was modeled in all the muscle volumes. ECRL was found to have two neuromuscular compartments, superficial and deep. One branch from the radial nerve proper was found to innervate ECRL. This branch was divided into anterior and posterior branches to the superficial and deep compartments, respectively. Five innervation patterns were identified in ECRB with partitioning of the muscle belly into two, three, or four compartments, in a proximal to distal direction depending on the number of nerve branches entering the muscle belly. The ECRL and ECRB both demonstrated neuromuscular compartmentalization based on intramuscular innervation. According to the partitioning hypothesis, a muscle may be differentially activated depending on the required function of the muscle, thus allowing multifunctional muscles to contribute to a variety of movements. Therefore, the increased number of neuromuscular partitions in ECRB when compared with ECRL could be due to the need for more differential recruitment in the ECRB depending on force requirements. Copyright © 2011 Wiley Periodicals, Inc.

Characterizing the Lateral Border of the Frontalis for Safe and Effective Injection of Botulinum Toxin.

PubMed

Choi, You-Jin; Won, Sung-Yoon; Lee, Jae-Gi; Hu, Kyung-Seok; Kim, Sung-Taek; Tansatit, Tanvaa; Kim, Hee-Jin

2016-03-01

The forehead is a common site for injection of botulinum neurotoxin type A (BoNT-A) to treat hyperactive facial muscles. Unexpected side effects of BoNT-A injection may occur because the anatomy of the forehead musculature is not fully characterized. The authors described the lateral border of the frontalis in terms of facial landmarks and reference lines to determine the safest and most effective forehead injection sites for BoNT-A. The hemifaces of 49 embalmed adult Korean cadavers were dissected in a morphometric analysis of the frontalis. L2 was defined in terms of FT (the most protruding point of the frontotemporal region), L0 (the line connecting the infraorbital margin with the tragus), and L1 (the line parallel to L0 and passing through FT) such that L2 was positioned 45° from L1 and passed through FT. The distance from FT to the superior margin of the orbicularis oculi was 12.3 ± 3.3 mm. The frontalis extended more than 5 cm along L2 in 49 of 49 cases (100%), more than 6 cm in 47 cases (95.9%), more than 7 cm in 34 cases (69.4%), more than 8 cm in 11 cases (22.4%), and more than 9 cm in 3 cases (6.1%). The lateral border of the frontalis ran parallel to and within 1 cm of the medial side of L2. Surface anatomy mapping can assist with predicting the lateral border of the frontalis to minimize the side effects and maximize the efficiency of BoNT-A injections into the forehead. © 2015 The American Society for Aesthetic Plastic Surgery, Inc. Reprints and permission: journals.permissions@oup.com.

Anatomical study of the internal nasal branch of the infraorbital nerve: Application to Minimizing Nerve Damage With Surgery In and Around the Nose.

PubMed

Iwanaga, Joe; Watanabe, Koichi; Henry, Brandon; Tomaszewski, Krzysztof A; Walocha, Jerzy A; Oskouian, Rod J; Tubbs, R Shane

2017-09-01

The internal nasal branch of the infraorbital nerve (ION) runs down the nose and around the ala to be distributed to the nasal septum and vestibule. The aim of this study was to measure the internal nasal branch around the ala of the nose and discuss its possible relevance in clinical/surgical practice. Twelve sides from seven specimens derived from fresh frozen and embalmed Caucasian cadaveric heads were dissected. The specimens included three males and four females. The ages of the cadavers at death ranged from 65 to 84 years. The diameter of the internal nasal branch, horizontal distance from the lateral contour of the ala (Point A) to the branch (distance H) and vertical distance from the bottom part of the ala (Point B) to the branch (distance V) were recorded. Distance H ranged from -1.6 to 1.5 mm on right sides and -1.0 to 1.5 mm on left sides. The diameter of the nerves at Point A ranged from 1.3 to 1.8 mm on right sides and 1.3 to 1.6 mm on left sides. Distance V ranged from -1.5 to 1.0 mm on right sides and -2.3 to 1.1 mm on left sides. The diameter of the nerves at Point B ranged from 0.7 to 1.3 mm on right sides and 0.8 to 1.2 mm on left sides. The results of this study are the first to detail the topography of the internal nasal branch of the ION. Clin. Anat. 30:817-820, 2017. © 2017Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

History of attitudes toward death: a comparative study between Persian and western cultures

PubMed Central

Aramesh, Kiarash

2016-01-01

In his seminal book on the historical periods of Western attitudes toward death, Philippe Aries describes four consecutive periods through which these attitudes evolved and transformed. According to him, the historical attitudes of Western cultures have passed through four major parts described above: “Tamed Death,” One’s Own Death,” “Thy Death,” and “Forbidden Death.” This paper, after exploring this concept through the lens of Persian Poetic Wisdom, concludes that he historical attitudes of Persian-speaking people toward death have generally passed through two major periods. The first period is an amalgamation of Aries’ “Tamed Death” and “One’s Own Death” periods, and the second period is an amalgamation of Aries’ “Thy Death” and “Forbidden Death” periods. This paper explores the main differences and similarities of these two historical trends through a comparative review of the consecutive historical periods of attitudes toward death between the Western and Persian civilizations/cultures. Although both civilizations moved through broadly similar stages, some influential contextual factors have been very influential in shaping noteworthy differences between them. The concepts of after-death judgment and redemption/downfall dichotomy and practices like deathbed rituals and their evolution after enlightenment and modernity are almost common between the above two broad traditions. The chronology of events and some aspects of conceptual evolutions (such as the lack of the account of permanent death of nonbelievers in the Persian tradition) and ritualistic practices (such as the status of the tombs of Shiite Imams and the absolute lack of embalming and wake in the Persian/Shiite culture) are among the differences. PMID:28523121

How much articular displacement can be detected using fluoroscopy for tibial plateau fractures?

PubMed

Haller, Justin M; O'Toole, Robert; Graves, Matthew; Barei, David; Gardner, Michael; Kubiak, Erik; Nascone, Jason; Nork, Sean; Presson, Angela P; Higgins, Thomas F

2015-11-01

While there is conflicting evidence regarding the importance of anatomic reduction for tibial plateau fractures, there are currently no studies that analyse our ability to grade reduction based on fluoroscopic imaging. The purpose of this study was to determine the accuracy of fluoroscopy in judging tibial plateau articular reduction. Ten embalmed human cadavers were selected. The lateral plateau was sagitally sectioned, and the joint was reduced under direct visualization. Lateral, anterior-posterior (AP), and joint line fluoroscopic views were obtained. The same fluoroscopic views were obtained with 2mm displacement and 5mm displacement. The images were randomised, and eight orthopaedic traumatologists were asked whether the plateau was reduced. Within each pair of conditions (view and displacement from 0mm to 5mm) sensitivity, specificity, and intraclass correlations (ICC) were evaluated. The AP-lateral view with 5mm displacement yielded the highest accuracy for detecting reduction at 90% (95% CI: 83-94%). For the other conditions, accuracy ranged from (37-83%). Sensitivity was highest for the reduced lateral view (79%, 95% CI: 57-91%). Specificity was highest in the AP-lateral view 98% (95% CI: 93-99%) for 5mm step-off. ICC was perfect for the AP-lateral view with 5mm displacement, but otherwise agreement ranged from poor to moderate at ICC=0.09-0.46. Finally, there was no additional benefit to including the joint-line view with the AP and lateral views. Using both AP and lateral views for 5mm displacement had the highest accuracy, specificity, and ICC. Outside of this scenario, agreement was poor to moderate and accuracy was low. Applying this clinically, direct visualization of the articular surface may be necessary to ensure malreduction less than 5mm. Copyright © 2015 Elsevier Ltd. All rights reserved.

Ready for the OR? – Clinical anatomy and basic surgical skills for students in their preclinical education

PubMed Central

Böckers, Anja; Lippold, Dominique; Fassnacht, Ulrich; Schelzig, Hubert; Böckers, Tobias M.

2011-01-01

Medical students’ first experience in the operating theatre often takes place during their electives and is therefore separated from the university’s medical curriculum. In the winter term 2009/10, the Institute of Anatomy and Cell Biology at the University of Ulm implemented an elective called “Ready for the OR” for 2nd year medical students participating in the dissection course. We attempted to improve learning motivation and examination results by transferring anatomical knowledge into a surgical setting and teaching basic surgical skills in preparation of the students’ first participation in the OR. Out of 69 online applicants, 50 students were randomly assigned to the Intervention Group (FOP) or the Control Group. In 5 teaching session students learned skills like scrubbing, stitching or the identification of frequently used surgical instruments. Furthermore, students visited five surgical interventions which were demonstrated by surgical colleagues on donated bodies that have been embalmed using the Thiel technique. The teaching sessions took place in the institute’s newly built “Theatrum Anatomicum” for an ideal simulation of a surgical setting. The learning outcomes were verified by OSPE. In a pilot study, an intervention group and a control group were compared concerning their examination results in the dissection course and their learning motivation through standardized SELLMO-test for students. Participants gained OSPE results between 60.5 and 92% of the maximum score. “Ready for the OR” was successfully implemented and judged an excellent add-on to anatomy teaching by the participants. However, we could not prove a significant difference in learning motivation or examination results. Future studies should focus on the learning orientation, the course’s long-term learning effects and the participants’ behavior in a real surgery setting. PMID:21866247

Cadaveric and radiologic study of the anatomical variations of the prostatic arteries: A review of the literature and a new classification proposal with application to prostatectomy.

PubMed

Moya, Celia; Cuesta, Julián; Friera, Alfonsina; Gil-Vernet Sedó, Jose María; Valderrama-Canales, Francisco J

2017-01-01

Development of prostatic arterial embolization (PAE) to treat benign prostatic hyperplasia (BPH) has raised interest in the variations of the prostatic arteries (PA). The aim of this study is to identify these vascular variations, to compare them with previous data, and to propose a simple classification. Ten adult male pelvis sides from embalmed cadavers were dissected, ages 69 to 92 years, and 10 PA were examined. In a retrospective analysis of 34 DSA pelvic angiographies on 28 patients aged 50 to 90 years, 48 PA were identified. A total of 58 PA were therefore analyzed. Six types are defined. Type I: PA originates from the anterior division (AD) of the internal iliac artery (IIA), 20.7%; Type II: PA emerges from the obturator artery (OA), 5.2%; type III: PA arises from the gluteal-pudendal trunk (GPT), 27.5%; Type IV: PA originates from the internal pudendal artery (IPA), 29.3%; Type V: PA comes from the middle rectal artery (MRA), 15.5%. Other origins, not observed in our sample but described in the literature, were amalgamated under Type VI. The AD/GPT/IPA stem is the main source of the PA. Analysis of the definitions of IIA branches and the associated terminology is necessary for interpreting the results reported by several authors on different samples, but in general the results fit the meta-analysis well. A new, simple, and complete classification for vascular variations of the PA is proposed. Clin. Anat. 30:71-80, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Anatomy of psoas muscle innervation: Cadaveric study.

PubMed

Mahan, Mark A; Sanders, Luke E; Guan, Jian; Dailey, Andrew T; Taylor, William; Morton, David A

2017-05-01

Hip flexion weakness is relatively common after lateral transpsoas surgery. Persistent weakness may result from injury to the innervation of the psoas major muscles (PMMs); however, anatomical texts have conflicting descriptions of this innervation, and the branching pattern of the nerves within the psoas major, particularly relative to vertebral anatomy, has not been described. The authors dissected human cadavers to describe the branching pattern of nerves supplying the PMMs. Sixteen embalmed cadavers were dissected, and the fine branching pattern of the innervation to the PMM was studied in 24 specimens. The number of branches and width and length of each branch of nerves to the PMMs were quantified. Nerve branches innervating the PMMs arose from spinal nerve levels L1-L4, with an average of 6.3 ± 1.1 branches per muscle. The L1 nerve branch was the least consistently present, whereas L2 and L3 branches were the most robust, the most numerous, and always present. The nerve branches to the psoas major commonly crossed the intervertebral (IV) disc obliquely prior to ramification within the muscle; 76%, 80%, and 40% of specimens had a branch to the PMM cross the midportion of the L2-3, L3-4, and L4-5 IV discs, respectively. The PMMs are segmentally innervated from the L2-L4 ventral rami branches, where these branches course obliquely across the L2-3, L3-4, and L4-5 IV discs. Knowledge of the mapping of nerve branches to the PMMs may reduce injury and the incidence of persistent weak hip flexion during lateral transpsoas surgery. Clin. Anat. 30:479-486, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Simulation of RIRS in soft cadavers: a novel training model by the Cadaveric Research On Endourology Training (CRET) Study Group.

PubMed

Huri, Emre; Skolarikos, Andreas; Tatar, İlkan; Binbay, Murat; Sofikerim, Mustafa; Yuruk, Emrah; Karakan, Tolga; Sargon, Mustafa; Demiryurek, Deniz; Miano, Roberto; Bagcioglu, Murat; Ezer, Mehmet; Cracco, Cecilia Maria; Scoffone, Cesare Marco

2016-05-01

The aim of the current study was to evaluate the use of fresh-frozen concurrently with embalmed cadavers as initial training models for flexible ureteroscopy (fURS) in a group of urologists who were inexperienced in retrograde intrarenal surgery (RIRS). Twelve urologists involved in a cadaveric fURS training course were enrolled into this prospective study. All the participants were inexperienced in fURS. Theoretical lectures and step-by-step tips and tricks video presentations on fURS were used to incorporate the technical background of the procedure to the hands-on-training course and to standardize the operating steps of the procedure. An 8-item survey was administered to the participants upon initiation and at the end of the course. Pre- and post-training scores were similar for each question. All the participants successfully completed the hands-on-training tasks. Mean pre-training duration [3.56 ± 2.0 min (range 1.21-7.46)] was significantly higher than mean post-training duration [1.76 ± 1.54 min (range 1.00-6.34)] (p = 0.008). At the end of the day, the trainers checked the integrity of the collecting system both by endoscopy and by fluoroscopy and could not detect any injury of the upper ureteral wall or pelvicalyceal structures. The functionality of the scopes was also checked, and no scope injury (including a reduction in the deflection capacity) was noted. The fURS simulation training model using soft human cadavers has the unique advantage of perfectly mimicking the living human tissues. This similarity makes this model one of the best if not the perfect simulator for an effective endourologic training.

The histology of tendon attachments to bone in man.

PubMed Central

Benjamin, M; Evans, E J; Copp, L

1986-01-01

Based on a parallel study of a wide range of human tendons from embalmed dissecting room subjects and from a study of dried bones, an explanation is offered for the well known similarity in gross appearance between the markings left by certain tendons (e.g. those of the rotator cuff) and by articular surfaces on dried bones. Epiphyseal tendons leave markings on bones that look like those left by articular surfaces. These tendons have a prominent zone of fibrocartilage at their attachment site and the deepest part of this is calcified, just as the deepest part of articular hyaline cartilage is calcified. After maceration of the soft tissues, the calcified (fibro) cartilage is left attached to the bone at articular surfaces and at the sites of tendon attachment. In all cases, the tissues separate at the basophilic tidemark between the calcified and uncalcified regions. This tidemark is smooth where there is much overlying uncalcified (fibro) cartilage and it is the smoothness that gives the typical appearance of the dried bone. Blood vessels do not generally traverse the tendon fibrocartilage plugs. Hence the areas are devoid of vascular foramina. The functional significance of tendon fibrocartilage is discussed with particular reference to supraspinatus. It is suggested that the uncalcified fibrocartilage ensures that the tendon fibres do not bend, splay out or become compressed at a hard tissue interface, and are thereby offered some protection from wear and tear. It is also suggested that the fibrocartilage plug of supraspinatus prevents the tendon from rubbing on the head of the humerus. Images Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 PMID:3693113

A biomechanical testing system to determine micromotion between hip implant and femur accounting for deformation of the hip implant: Assessment of the influence of rigid body assumptions on micromotions measurements.

PubMed

Leuridan, Steven; Goossens, Quentin; Roosen, Jorg; Pastrav, Leonard; Denis, Kathleen; Mulier, Michiel; Desmet, Wim; Vander Sloten, Jos

2017-02-01

Accurate pre-clinical evaluation of the initial stability of new cementless hip stems using in vitro micromotion measurements is an important step in the design process to assess the new stem's potential. Several measuring systems, linear variable displacement transducer-based and other, require assuming bone or implant to be rigid to obtain micromotion values or to calculate derived quantities such as relative implant tilting. An alternative linear variable displacement transducer-based measuring system not requiring a rigid body assumption was developed in this study. The system combined advantages of local unidirectional and frame-and-bracket micromotion measuring concepts. The influence and possible errors that would be made by adopting a rigid body assumption were quantified. Furthermore, as the system allowed emulating local unidirectional and frame-and-bracket systems, the influence of adopting rigid body assumptions were also analyzed for both concepts. Synthetic and embalmed bone models were tested in combination with primary and revision implants. Single-legged stance phase loading was applied to the implant - bone constructs. Adopting a rigid body assumption resulted in an overestimation of mediolateral micromotion of up to 49.7μm at more distal measuring locations. Maximal average relative rotational motion was overestimated by 0.12° around the anteroposterior axis. Frontal and sagittal tilting calculations based on a unidirectional measuring concept underestimated the true tilting by an order of magnitude. Non-rigid behavior is a factor that should not be dismissed in micromotion stability evaluations of primary and revision femoral implants. Copyright © 2017 Elsevier Ltd. All rights reserved.

Clinically relevant anatomy of recurrent laryngeal nerve.

PubMed

Haller, Justin M; Iwanik, Michael; Shen, Francis H

2012-01-15

An anatomic study of anterior cervical dissection of 11 embalmed cadavers. To determine the anatomic relationship of the recurrent laryngeal nerve (RLN) to the cervical spine and demonstrate vulnerability of the nerve during anterior surgical approach. The most common complications of anterior neck surgery are dysphagia and RLN palsy. The morbidity of these complications has led to the investigation of the impact of sidedness in anterior cervical spine surgery. Eleven adult cadavers (5 male/6 female) were dissected bilaterally to expose the path of the recurrent laryngeal nerve. The right RLN branched from the vagus nerve at the level of T1-T2 or inferior in all specimens. After looping around the subclavian artery, the right RLN became invested in the tracheoesophageal fascia greater than 0.5 cm inferior to C7-T1 in all specimens. The RLN traveled superiorly, slightly anterior to the tracheoesophageal groove, before coursing between the trachea and the thyroid. In 82% (9 of 11) of right-sided dissections, the RLN entered the larynx at or inferior to C6-C7. After looping around the aortic arch, the left RLN was invested in the tracheoesophageal fascia inferior to the T2 level in 100% (10 of 10) of cadavers. The nerve traveled slightly anterior to the tracheoesophageal groove and within the tracheoesophageal fascia before coursing between the trachea and thyroid. In all the left-sided dissections, the RLN entered the larynx at or inferior to C6-C7. This study found that superior to C7-T1, both RLNs had similar anatomic courses and received similar protection via surrounding soft-tissue structures. From an anatomic perspective, the authors did not appreciate a side-to-side difference superior to this level that could place either nerve under greater risk for injury.

Horizontal Slide Creates Less Cervical Motion When Centering an Injured Patient on a Spine Board.

PubMed

DuBose, Dewayne N; Zdziarski, Laura Ann; Scott, Nicole; Conrad, Bryan; Long, Allyson; Rechtine, Glenn R; Prasarn, Mark L; Horodyski, MaryBeth

2016-05-01

A patient with a suspected cervical spine injury may be at risk for secondary neurologic injury when initially placed and repositioned to the center of the spine board. We sought to determine which centering adjustment best limits cervical spine movement and minimizes the chance for secondary injury. Using five lightly embalmed cadaveric specimens with a created global instability at C5-C6, motion sensors were anchored to the anterior surface of the vertebral bodies. Three repositioning methods were used to center the cadavers on the spine board: horizontal slide, diagonal slide, and V-adjustment. An electromagnetic tracking device measured angular (degrees) and translation (millimeters) motions at the C5-C6 level during each of the three centering adjustments. The dependent variables were angular motion (flexion-extension, axial rotation, lateral flexion) and translational displacement (anteroposterior, axial, and medial-lateral). The nonuniform condition produced significantly less flexion-extension than the uniform condition (p = 0.048). The horizontal slide adjustment produced less cervical flexion-extension (p = 0.015), lateral bending (p = 0.003), and axial rotation (p = 0.034) than the V-adjustment. Similarly, translation was significantly less with the horizontal adjustment than with the V-adjustment; medial-lateral (p = 0.017), axial (p < 0.001), and anteroposterior (p = 0.006). Of the three adjustments, our team found that horizontal slide was also easier to complete than the other methods. The horizontal slide best limited cervical spine motion and may be the most helpful for minimizing secondary injury based on the study findings. Copyright © 2016 Elsevier Inc. All rights reserved.

Anatomical association between wrist extensor musculature and topographical pain sensitivity maps of the elbow area.

PubMed

Prados-Frutos, Juan Carlos; Ruiz-Ruiz, Beatriz; De-la-Llave-Rincón, Ana Isabel; Arendt-Nielsen, Lars; Madeleine, Pascal; Fernández-de-Las-Peñas, César

2012-06-01

High-density topographical sensitivity maps have been developed to visualize nonuniformity deep tissue pain sensitivity in, for example, lateral epicondylitis (LE). The aim of this cadaveric study was to determine the anatomical association between the topographical sensitivity maps over the elbow area and wrist extensor musculature. A topographical pressure sensitivity map consisting of 12 points forming a 3 × 4 matrix: 4 points in the superior part, 4 points in the middle, and 4 points in the lower part around the lateral epicondyle was marker on a 50-year embalmed cadaver. Color marker pins were inserted into each point. Pins were removed during the process of dissection, but the small holes created by their removal assured accurate relocation. Progressive dissection revealed that points 1 to 4 (superior line) were placed over the musculotendinous junction and belly of the extensor carpi radialis brevis (ECRB) muscle, points 6 to 8 (middle line) were placed over the musculotendinous junction and belly of the extensor digitorum communis muscle, and points 9 to 12 (inferior line) were located over the musculotendinous junction and belly of the extensor carpi ulnaris muscle. It was also observed that the superficial branch of the radial nerve runs between the belly of the ECRB and extensor digitorum communis muscles. This study confirmed that anatomical location previously assumed supporting the important wrist extensor muscles, particularly the ECRB, in patients with LE as depicted by pressure pain sensitivity maps. This study also suggests a potential role of the superficial branch of the radial nerve in LE. Copyright © 2012 National University of Health Sciences. Published by Mosby, Inc. All rights reserved.

Effect of an ozone-generating air-purifying device on reducing concentrations of formaldehyde in air

DOE Office of Scientific and Technical Information (OSTI.GOV)

Esswein, E.J.; Boeniger, M.F.

1994-02-01

Formaldehyde, an air contaminant found in many indoor air investigations, poses distinct occupational exposure hazards in certain job categories (e.g., mortuary science) but is also of concern when found or suspected in office buildings and homes. A variety of air-purifying devices (APDs) are currently available or marketed for application to reduce or remove concentrations of a variety of indoor air pollutants through the use of ozone as a chemical oxidant. An investigation was conducted to determine if concentrations of formaldehyde similar to those found in industrial hygiene evaluations of funeral homes could be reduced with the use of an ozone-generatingmore » APD. An ozone-generating APD was placed in an exposure chamber and formaldehyde-containing embalming solution was allowed to evaporate naturally, creating peak and mean chamber concentrations of 2.5 and 1.3 ppm, respectively. Continuous-reading instruments were used to sample for formaldehyde and ozone. Active sampling methods were also used to sample simultaneously for formaldehyde and a possible reactant product, formic acid. Triplicate measurements were made in each of three evaluations: formaldehyde alone, ozone alone, and formaldehyde and ozone combined. Concentrations of formaldehyde were virtually identical with and without 0.5 ppm ozone. No reduction in formaldehyde concentration was found during a 90-minute evaluation using ozone at this concentration with peak and average concentrations of approximately 2.5 and 1.3 ppm formaldehyde, respectively. The results of this investigation suggest that the use of ozone is ineffective in reducing concentrations of formaldehyde. Because ozone has demonstrated health hazards, and is a regulated air contaminant in both the occupational and ambient environment, the use of ozone as an air purification agent in indoor air does not seem warranted. 25 refs., 5 figs., 4 tabs.« less

A new distraction arthroplasty device using magnetic force; a cadaveric study.

PubMed

Kamei, Goki; Ochi, Mitsuo; Okuhara, Atsushi; Fujimiya, Mineko; Deie, Masataka; Adachi, Nobuo; Nakamae, Atsuo; Nakasa, Tomoyuki; Ohkawa, Shingo; Takazawa, Kobun; Eguchi, Akio; Katou, Tomohiro; Takada, Tsuyoshi; Usman, Muhammad Andry

2013-04-01

It is difficult for an articular cartilage injury to repair spontaneously. There are many procedures for treating cartilage injury, however there is no standard procedure for middle-aged patients who have diffuse knee osteoarthritis, especially of the lateral compartment. Therefore, Ochi developed a new distraction device that uses magnetic power to enlarge a joint space and promote cartilage regeneration with microfracture. The purpose of this study is to evaluate this new distraction arthroplasty system by using the cadaveric knee. This study used ten knees from six cadavers that were embalmed by Thiel's methods. The medial and lateral joint space was measured by AP radiographic view before and after distraction, and after weight-bearing to evaluate the joint distraction. The contact pressure of the medial and lateral compartments at the knee extension position by using a prescale film system was measured before and after weight-bearing with a 15 or 30-kg weight-bearing load to evaluate the effectiveness of this device. The lateral joint space significantly increased from the pre-distraction to the post-distraction; however, it did not change significantly between post-distraction and post-weight-bearing. With a 15 or 30-kg weight-bearing load, the contact pressure of the lateral compartment significantly decreased from the pre-distraction to the post-distraction. The most important advantage of this device is that it maintains a continuous distraction tension and enables almost the full range of motion of the knee. We believe that joint distraction by using magnetic force can be a promising option for cartilage injury in middle-aged patients. Copyright © 2013 Elsevier Ltd. All rights reserved.

Take away body parts! An investigation into the use of 3D-printed anatomical models in undergraduate anatomy education.

PubMed

Smith, Claire F; Tollemache, Nicholas; Covill, Derek; Johnston, Malcolm

2018-01-01

Understanding the three-dimensional (3D) nature of the human form is imperative for effective medical practice and the emergence of 3D printing creates numerous opportunities to enhance aspects of medical and healthcare training. A recently deceased, un-embalmed donor was scanned through high-resolution computed tomography. The scan data underwent segmentation and post-processing and a range of 3D-printed anatomical models were produced. A four-stage mixed-methods study was conducted to evaluate the educational value of the models in a medical program. (1) A quantitative pre/post-test to assess change in learner knowledge following 3D-printed model usage in a small group tutorial; (2) student focus group (3) a qualitative student questionnaire regarding personal student model usage (4) teaching faculty evaluation. The use of 3D-printed models in small-group anatomy teaching session resulted in a significant increase in knowledge (P = 0.0001) when compared to didactic 2D-image based teaching methods. Student focus groups yielded six key themes regarding the use of 3D-printed anatomical models: model properties, teaching integration, resource integration, assessment, clinical imaging, and pathology and anatomical variation. Questionnaires detailed how students used the models in the home environment and integrated them with anatomical learning resources such as textbooks and anatomy lectures. In conclusion, 3D-printed anatomical models can be successfully produced from the CT data set of a recently deceased donor. These models can be used in anatomy education as a teaching tool in their own right, as well as a method for augmenting the curriculum and complementing established learning modalities, such as dissection-based teaching. Anat Sci Educ 11: 44-53. © 2017 American Association of Anatomists. © 2017 American Association of Anatomists.

The incidence and morphology of maxillary sinus septa in dentate and edentulous maxillae: a cadaveric study with a brief review of the literature

PubMed Central

Wabale, Rajendra Namdeo; Siddiqui, Abu Ubaida; Farooqui, Mujjebuddeen Samsudeen

2015-01-01

Objectives The aim of this study is to determine the incidence, location, and orientation of maxillary sinus septa in formalin embalmed cadavers. Materials and Methods The study was conducted on 210 cadaveric heads available in our department. After taking the mid-sagittal section the specimens were opened from the medial aspect and the sinus cavity was explored for the presence of maxillary sinus septa, their anatomical plane, location and dimensions. Results The mean linear distance between maxillary sinus floor and its anatomical ostium was 26.76±5.21 mm and 26.91±4.96 mm on right and left side, respectively. A total of 59 maxillary sinus septa (28.1%) were observed in 210 maxillary specimens. Septae were most common, 33 septa (55.9%), in the middle region (between first and second molar tooth) of the sinus cavity. The maxillary sinus membrane (Schneiderian membrane) adhered tightly to the maxillary sinus and over the septae. Significantly more maxillary sinus septa were observed in edentulous maxillae in comparison to the dentate upper jaw. Conclusion Knowledge of location of maxillary sinus ostium is mandatory for the rhinologist for drainage of secretions in maxillary sinusitis. The morphological details of maxillary sinus septa, particularly their location and anatomical planes, will guide dentists in performance of safe implant surgeries. The maxillary antrum septa of category I and II may complicate the procedure of inversion of bone plate and elevation of sinus membrane during maxillary augmentation surgeries. The category III septa observed in the sagittal plane were embedded by one of the branches of the infraorbital nerve in it, and if accidentally cut will lead to infraorbital nerve palsy in maxillary sinus surgeries. PMID:25741466

The influence of simulated transversus abdominis muscle force on sacroiliac joint flexibility during asymmetric moment application to the pelvis.

PubMed

Gnat, Rafael; Spoor, Kees; Pool-Goudzwaard, Annelies

2015-10-01

The role of so-called local muscle system in motor control of the lower back and pelvis is a subject of ongoing debate. Prevailing beliefs in stabilizing function of this system were recently challenged. This study investigated the impact of in vitro simulated force of transversely oriented fibres of the transversus abdominis muscle (a part of the local system) on flexibility of the sacroiliac joint during asymmetric moment application to the pelvis. In 8 embalmed specimens an incremental moment was applied in the sagittal plane to one innominate with respect to the fixed contralateral innominate. Ranges of motion of the sacroiliac joint were recorded using the Vicon Motion Capture System. Load-deformation curves were plotted and flexibility of the sacroiliac joint was calculated separately for anterior and posterior rotations of the innominate, with and without simulated muscle force. Flexibility of the sacroiliac joint was significantly bigger during anterior rotation of the innominate, as compared to posterior rotation (Anova P<0.05). After application of simulated force of transversus abdominis, flexibility of the joint did not change both during anterior and posterior rotations of the innominate. A lack of a stiffening effect of simulated transversus abdominis force on the sacroiliac joint was demonstrated. Earlier hypotheses suggesting a stiffening influence of this muscle on the pelvis cannot be confirmed. Consistent with previous findings smaller flexibility of the joint recorded during posterior rotation of the innominate may be of clinical importance for physio- and manual therapists. However, major limitations of the study should be acknowledged: in vitro conditions and simulation of only solitary muscle force. Copyright © 2015 Elsevier Ltd. All rights reserved.

The human first carpometacarpal joint: osteoarthritic degeneration and 3-dimensional modeling.

PubMed

Kovler, Maksim; Lundon, Katie; McKee, Nancy; Agur, Anne

2004-01-01

The purpose of this study was to gain insight into potential mechanical factors contributing to osteoarthritis of the human first carpometacarpal joint (CMC). This was accomplished by creating three-dimensional (3-D) computer models of the articular surfaces of CMC joints of older humans and by determining their locus of cartilage degeneration. The research questions of this study were: 1) What is the articular wear pattern of cartilage degeneration in CMC osteoarthritis?, (2) Are there significant topographic differences in joint area and contour between the joints of males and females?, and 3) Are there measurable bony joint recesses consistently found within the joint? The articular surfaces of 25 embalmed cadaveric joints (from 13 cadavers) were graded for degree of osteoarthritis, and the location of degeneration was mapped using a dissection microscope. The surfaces of 14 mildly degenerated joints were digitized and reconstructed as 3-D computer models using the Microscribe 3D-X Digitizer and the Rhinoceros 2.0 NURBS Modeling Software. This technology provided accurate and reproducible information on joint area and topography. The dorsoradial trapezial region was found to be significantly more degenerated than other quadrants in both males and females. Mean trapezial articular surface area was 197 mm 2 in males and 160 mm(2) in females; the respective mean areas for the metacarpal were 239 mm(2) in males and 184 mm(2) in females. Joints of females were found to be significantly more concave in radioulnar profile than those of males. Three bony joint recesses were consistently found, two in the radial and ulnar aspects of the trapezium and the third in the palmar surface of the metacarpal.

Validity and reliability of a structured-light 3D scanner and an ultrasound imaging system for measurements of facial skin thickness.

PubMed

Lee, Kang-Woo; Kim, Sang-Hwan; Gil, Young-Chun; Hu, Kyung-Seok; Kim, Hee-Jin

2017-10-01

Three-dimensional (3 D)-scanning-based morphological studies of the face are commonly included in various clinical procedures. This study evaluated validity and reliability of a 3 D scanning system by comparing the ultrasound (US) imaging system versus the direct measurement of facial skin. The facial skin thickness at 19 landmarks was measured using the three different methods in 10 embalmed adult Korean cadavers. Skin thickness was first measured using the ultrasound device, then 3 D scanning of the facial skin surface was performed. After the skin on the left half of face was gently dissected, deviating slightly right of the midline, to separate it from the subcutaneous layer, and the harvested facial skin's thickness was measured directly using neck calipers. The dissected specimen was then scanned again, then the scanned images of undissected and dissected faces were superimposed using Morpheus Plastic Solution (version 3.0) software. Finally, the facial skin thickness was calculated from the superimposed images. The ICC value for the correlations between the 3 D scanning system and direct measurement showed excellent reliability (0.849, 95% confidence interval = 0.799-0.887). Bland-Altman analysis showed a good level of agreement between the 3 D scanning system and direct measurement (bias = 0.49 ± 0.49 mm, mean±SD). These results demonstrate that the 3 D scanning system precisely reflects structural changes before and after skin dissection. Therefore, an in-depth morphological study using this 3 D scanning system could provide depth data about the main anatomical structures of face, thereby providing crucial anatomical knowledge for utilization in various clinical applications. Clin. Anat. 30:878-886, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

A new beating-heart off-pump coronary artery bypass grafting training model.

PubMed

Bouma, Wobbe; Kuijpers, Michiel; Bijleveld, Aanke; De Maat, Gijs E; Koene, Bart M; Erasmus, Michiel E; Natour, Ehsan; Mariani, Massimo A

2015-01-01

Training models are essential in mastering the skills required for off-pump coronary artery bypass grafting (OPCAB). We describe a new, high-fidelity, effective and reproducible beating-heart OPCAB training model in human cadavers. Human cadavers were embalmed according to the 'Thiel method' which allows their long-term and repeated use. The training model was constructed by bilateral ligation of the pulmonary veins, cross-clamping of the aorta, positioning of an intra-aortic balloon pump (IABP) in the left ventricle (LV) through the apex (tightened with pledget-reinforced purse strings) and finally placing of a fluid line in the LV through the left atrial appendage (tightened with a pledget-reinforced purse string). The LV was filled with saline to the desired pressure through the fluid line and the IABP was switched on and set to a desired frequency [usually 60-80 beats per minute (bpm)]. A high-fidelity simulation has known limitations, but a more complex, realistic training environment with an actual beating (human) heart strengthens the entire training exercise and is of incremental value. All types of coronary artery anastomosis can be trained with this model. Training should be performed under the supervision of an experienced OPCAB surgeon and training progress is best evaluated with serial Objective Structured Assessment of Technical Skills (OSATS). A score of at least 48 points on the final OSATS ('good' on all components) is recommended before trainees can start their training on patients. The entire set-up provides a versatile training model to help develop and improve the skills required to safely perform beating heart OPCAB anastomoses. © The Author 2014. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

Assessment of Accuracy and Reliability in Acetabular Cup Placement Using an iPhone/iPad System.

PubMed

Kurosaka, Kenji; Fukunishi, Shigeo; Fukui, Tomokazu; Nishio, Shoji; Fujihara, Yuki; Okahisa, Shohei; Takeda, Yu; Daimon, Takashi; Yoshiya, Shinichi

2016-07-01

Implant positioning is one of the critical factors that influences postoperative outcome of total hip arthroplasty (THA). Malpositioning of the implant may lead to an increased risk of postoperative complications such as prosthetic impingement, dislocation, restricted range of motion, polyethylene wear, and loosening. In 2012, the intraoperative use of smartphone technology in THA for improved accuracy of acetabular cup placement was reported. The purpose of this study was to examine the accuracy of an iPhone/iPad-guided technique in positioning the acetabular cup in THA compared with the reference values obtained from the image-free navigation system in a cadaveric experiment. Five hips of 5 embalmed whole-body cadavers were used in the study. Seven orthopedic surgeons (4 residents and 3 senior hip surgeons) participated in the study. All of the surgeons examined each of the 5 hips 3 times. The target angle was 38°/19° for operative inclination/anteversion angles, which corresponded to radiographic inclination/anteversion angles of 40°/15°. The simultaneous assessment using the navigation system showed mean±SD radiographic alignment angles of 39.4°±2.6° and 16.4°±2.6° for inclination and anteversion, respectively. Assessment of cup positioning based on Lewinnek's safe zone criteria showed all of the procedures (n=105) achieved acceptable alignment within the safe zone. A comparison of the performances by resident and senior hip surgeons showed no significant difference between the groups (P=.74 for inclination and P=.81 for anteversion). The iPhone/iPad technique examined in this study could achieve acceptable performance in determining cup alignment in THA regardless of the surgeon's expertise. [Orthopedics. 2016; 39(4):e621-e626.]. Copyright 2016, SLACK Incorporated.

Cervical extraforaminal ligaments: an anatomical study.

PubMed

Arslan, Mehmet; Açar, Halil İbrahim; Cömert, Ayhan

2017-12-01

The purpose of this study was to elucidate the anatomy and clinical importance of extraforaminal ligaments in the cervical region. This study was performed on eight embalmed cadavers. The existence and types of extraforaminal ligaments were identified. The morphology, quantity, origin, insertion, and orientation of the extraforaminal ligaments in the cervical region were observed. Extraforaminal ligaments could be divided into two types: transforaminal ligaments and radiating ligaments. It was observed that during their course, transforaminal ligaments cross the intervertebral foramen ventrally. They usually originate from the anteroinferior margin of the anterior tubercle of the cranial transverse process and insert into the superior margin of the anterior tubercle of the caudal transverse process. The dorsal aspect of the transforaminal ligaments adhere loosely to the spinal nerve sheath. The length, width and thickness of these ligaments increased from the cranial to the caudal direction. A single intervertebral foramen contained at least one transforaminal ligament. A total of 98 ligaments in 96 intervertebral foramina were found. The spinal nerves were extraforaminally attached to neighboring anterior and posterior tubercle of the cervical transverse process by the radiating ligaments. The radiating ligaments consisted of the ventral superior, ventral, ventral inferior, dorsal superior and dorsal inferior radiating ligaments. Radiating ligaments originated from the adjacent transverse processes and inserted into the nerve root sheath. The spinal nerve was held like the hub of a wheel by a series of radiating ligaments. The dorsal ligaments were the thickest. From C2-3 to C6-7 at the cervical spine, radiating ligaments were observed. They developed particularly at the level of the C5-C6 intervertebral foramen. This anatomic study may provide a better understanding of the relationship of the extraforaminal ligaments to the cervical nerve root.

Tensile properties of the transverse carpal ligament and carpal tunnel complex.

PubMed

Ugbolue, Ukadike C; Gislason, Magnus K; Carter, Mark; Fogg, Quentin A; Riches, Philip E; Rowe, Philip J

2015-08-01

A new sophisticated method that uses video analysis techniques together with a Maillon Rapide Delta to determine the tensile properties of the transverse carpal ligament-carpal tunnel complex has been developed. Six embalmed cadaveric specimens amputated at the mid-forearm and aged (mean (SD)): 82 (6.29) years were tested. The six hands were from three males (four hands) and one female (two hands). Using trigonometry and geometry the elongation and strain of the transverse carpal ligament and carpal arch were calculated. The cross-sectional area of the transverse carpal ligament was determined. Tensile properties of the transverse carpal ligament-carpal tunnel complex and Load-Displacement data were also obtained. Descriptive statistics, one-way ANOVA together with a post-hoc analysis (Tukey) and t-tests were incorporated. A transverse carpal ligament-carpal tunnel complex novel testing method has been developed. The results suggest that there were no significant differences between the original transverse carpal ligament width and transverse carpal ligament at peak elongation (P=0.108). There were significant differences between the original carpal arch width and carpal arch width at peak elongation (P=0.002). The transverse carpal ligament failed either at the mid-substance or at their bony attachments. At maximum deformation the peak load and maximum transverse carpal ligament displacements ranged from 285.74N to 1369.66N and 7.09mm to 18.55mm respectively. The transverse carpal ligament cross-sectional area mean (SD) was 27.21 (3.41)mm(2). Using this method the results provide useful biomechanical information and data about the tensile properties of the transverse carpal ligament-carpal tunnel complex. Copyright © 2015 Elsevier Ltd. All rights reserved.

Characterizing the Lateral Border of the Frontalis for Safe and Effective Injection of Botulinum Toxin

PubMed Central

Choi, You-Jin; Won, Sung-Yoon; Lee, Jae-Gi; Hu, Kyung-Seok; Kim, Sung-Taek; Tansatit, Tanvaa; Kim, Hee-Jin

2016-01-01

Background The forehead is a common site for injection of botulinum neurotoxin type A (BoNT-A) to treat hyperactive facial muscles. Unexpected side effects of BoNT-A injection may occur because the anatomy of the forehead musculature is not fully characterized. Objectives The authors described the lateral border of the frontalis in terms of facial landmarks and reference lines to determine the safest and most effective forehead injection sites for BoNT-A. Methods The hemifaces of 49 embalmed adult Korean cadavers were dissected in a morphometric analysis of the frontalis. L2 was defined in terms of FT (the most protruding point of the frontotemporal region), L0 (the line connecting the infraorbital margin with the tragus), and L1 (the line parallel to L0 and passing through FT) such that L2 was positioned 45° from L1 and passed through FT. Results The distance from FT to the superior margin of the orbicularis oculi was 12.3 ± 3.3 mm. The frontalis extended more than 5 cm along L2 in 49 of 49 cases (100%), more than 6 cm in 47 cases (95.9%), more than 7 cm in 34 cases (69.4%), more than 8 cm in 11 cases (22.4%), and more than 9 cm in 3 cases (6.1%). The lateral border of the frontalis ran parallel to and within 1 cm of the medial side of L2. Conclusions Surface anatomy mapping can assist with predicting the lateral border of the frontalis to minimize the side effects and maximize the efficiency of BoNT-A injections into the forehead. PMID:26507959

Anatomical feasibility study of flexor hallucis longus transfer in treatment of Achilles tendon and posteromedial portal of ankle arthroscopy.

PubMed

Mao, Haijiao; Wang, Linger; Dong, Wenwei; Liu, Zhenxin; Yin, Weigang; Xu, Dachuan; Wapner, Keith L

2018-04-16

The aim of this study was to evaluate the occurrence of anatomical variations of the musculotendinous junction of the flexor hallucis longus (FHL) muscle, the relationship between FHL tendon or muscle and the tibial neurovascular bundle at the level of the posterior ankle joint in human cadavers. Seventy embalmed feet from 20 male and 15 female cadavers, the cadavers' mean age was 65.4 (range from 14 to 82) years, were dissected and anatomically classified to observe FHL muscle morphology define the relationship between FHL tendon or muscle and the tibial neurovascular bundle. The distance between the musculotendinous junction and the relationship between FHL tendon or muscle and the tibial neurovascular bundle was determined. Three morphology types of FHL muscle were identified: a long lateral and shorter medial muscle belly, which was observed in 63 specimens (90%); equal length medial and lateral muscle bellies, this variant was only observed in five specimens (7.1%); one lateral and no medial muscle belly, which was observed in two specimens (2.9%). No statistically significant difference was observed according to gender or side (p > 0.05). Two patterns were identified and described between FHL tendon or muscle and the tibial neurovascular bundle. Pattern 1, the distance between the neurovascular bundle and FHL tendon was 3.46 mm (range 2.34-8.84, SD = 2.12) which was observed in 66 specimens (94.3%); Pattern 2, there was no distance which was observed in four specimens (5.7%). Knowing FHL muscle morphology, variations provide new important insights into secure planning and execution of a FHL transfer for Achilles tendon defect as well as for the interpretation of ultrasound and magnetic resonance images. With posterior arthroscopic for the treatment of various ankle pathologies, posteromedial portal may be introduced into the posterior aspect of the ankle without gross injury to the tibial neurovascular structures because of the gap between the neurovascular bundle and FHL tendon.

Quantitative verification of the keyhole concept: a comparison of area of exposure in the parasellar region via supraorbital keyhole, frontotemporal pterional, and supraorbital approaches.

PubMed

Cheng, Cheng-Mao; Noguchi, Akio; Dogan, Aclan; Anderson, Gregory J; Hsu, Frank P K; McMenomey, Sean O; Delashaw, Johnny B

2013-02-01

This study was designed to determine if the "keyhole concept," proposed by Perneczky's group, can be verified quantitatively. Fourteen (3 bilateral and 8 unilateral) sides of embalmed latex-injected cadaveric heads were dissected via 3 sequential craniotomy approaches: supraorbital keyhole, frontotemporal pterional, and supraorbital. Three-dimensional cartesian coordinates were recorded using a stereotactic localizer. The orthocenter of the ipsilateral anterior clinoid process, the posterior clinoid process, and the contralateral anterior clinoid process are expressed as a center point (the apex). Seven vectors project from the apex to their corresponding target points in a radiating manner on the parasellar skull base. Each 2 neighboring vectors border what could be considered a triangle, and the total area of the 7 triangles sharing the same apex was geometrically expressed as the area of exposure in the parasellar region. Values are expressed as the mean ± SD (mm(2)). The total area of exposure was as follows: supraorbital keyhole 1733.1 ± 336.0, pterional 1699.3 ± 361.9, and supraorbital 1691.4 ± 342.4. The area of exposure on the contralateral side was as follows: supraorbital keyhole 602.2 ± 194.7, pterional 595.2 ± 228.0, and supraorbital 553.3 ± 227.2. The supraorbital keyhole skull flap was 2.0 cm(2), and the skull flap size ratio was 1:5:6.5 (supraorbital keyhole/pterional/supraorbital). The area of exposure of the parasellar region through the smaller supraorbital keyhole approach is as adequate as the larger pterional and supraorbital approaches. The keyhole concept can be verified quantitatively as follows: 1) a wide area of exposure on the skull base can be obtained through a small keyhole skull opening, and 2) the side opposite the opening can also be visualized.

Classic versus millennial medical lab anatomy.

PubMed

Benninger, Brion; Matsler, Nik; Delamarter, Taylor

2014-10-01

This study investigated the integration, implementation, and use of cadaver dissection, hospital radiology modalities, surgical tools, and AV technology during a 12-week contemporary anatomy course suggesting a millennial laboratory. The teaching of anatomy has undergone the greatest fluctuation of any of the basic sciences during the past 100 years in order to make room for the meteoric rise in molecular sciences. Classically, anatomy consisted of a 2-year methodical, horizontal, anatomy course; anatomy has now morphed into a 12-week accelerated course in a vertical curriculum, at most institutions. Surface and radiological anatomy is the language for all clinicians regardless of specialty. The objective of this study was to investigate whether integration of full-body dissection anatomy and modern hospital technology, during the anatomy laboratory, could be accomplished in a 12-week anatomy course. Literature search was conducted on anatomy text, journals, and websites regarding contemporary hospital technology integrating multiple image mediums of 37 embalmed cadavers, surgical suite tools and technology, and audio/visual technology. Surgical and radiology professionals were contracted to teach during the anatomy laboratory. Literature search revealed no contemporary studies integrating full-body dissection with hospital technology and behavior. About 37 cadavers were successfully imaged with roentograms, CT, and MRI scans. Students were in favor of the dynamic laboratory consisting of multiple activity sessions occurring simultaneously. Objectively, examination scores proved to be a positive outcome and, subjectively, feedback from students was overwhelmingly positive. Despite the surging molecular based sciences consuming much of the curricula, full-body dissection anatomy is irreplaceable regarding both surface and architectural, radiological anatomy. Radiology should not be a small adjunct to understand full-body dissection, but rather, full-body dissection aids the understanding of radiology mediums. The millennial anatomy dissection laboratory should consist of, at least, 50% radiology integration during full-body dissection. This pilot study is an example of the most comprehensive integration of full-body dissection, radiology, and hospital technology. © 2014 Wiley Periodicals, Inc.

Vertical Vibration Transmission Through the Lumbar Spine of the Seated SUBJECT—FIRST Results

NASA Astrophysics Data System (ADS)

El-Khatib, A.; Guillon, F.; Dômont, A.

1998-08-01

Seven fresh, not embalmed, cadavers (58·1±6·6 years, 73±10·3 kg, 170·7±6·5 cm) were submitted, in the week following their death (7·1±3·1 days), to a whole-body vertical broad-band white random vibration in the bandwidth 0·8 to 25 Hz of about 1·5 m/s2r.m.s. Two postures were tested using the same rigid seat, each one with and without a lumbar support: seated erect and seated as in a car. Vibration was monitored on the floor, the seating in the vertical direction (buttocks-to-head), the five lumbar vertebrae and the sternum: vertical (buttocks to head) and longitudinal (back to chest). Biaxial accelerometers were mounted rigidly on the anterior face of the vertebral body, after the removal of the abdominal viscera. Analogue recordings of each channel were passed through an antialising filter (Fc=40 Hz) then sampled at 80 Hz (4096 samples/channel). The inclination of each accelerometer (α) was measured on the lateral X-ray taken for every trial, then the data were set in order to be in the same reference (Z=z/cos α,X=xcos α). Spectral analysis was performed with a frequency resolution of 0·3 Hz, on the basis of Welch's method. Thirty one overlapping sections (256 samples per section using a Hanning window with an overlap rate of 128 samples) of the estimated periodograms were averaged. Transfer and coherence functions were than estimated between the vertical seating acceleration and the measured accelerations at the upper levels. The first results showed that the vertical vibration transmission was constant throughout the lumbar spine. Inter-subject variability was the major source of disparity. Resonance phenomena were observed between 4 and 9 Hz and depended on posture.

Sorption kinetics of Hg and HgCl[sub 2] on Kirkwood-Cohansey aquifer sediments from the New Jersey Coastal Plain

DOE Office of Scientific and Technical Information (OSTI.GOV)

MacLeod, C.; Peterson, J.

1992-01-01

Anomalously high Hg concentrations have been detected from domestic wells in the Kirkwood-Cohansey Aquifer System, New Jersey Coastal Plain. Mercury concentrations ranging from 0.2--83.0 [mu]g/l in relatively shallow wells ([lt] 100 feet) have been detected. Concentrations in excess of 2.0 [mu]g/l, (the USEPA Drinking Water Standard) have been detected in wells where the Cohansey Sand is overlain by the Bridgeton Formation; a fluvial iron-rich sand with some gravelly channel deposits containing goethite and gibbsite nodules. In this study, Bridgeton Fm. sediments were used to determine the sorption kinetics for solutions containing HgCl[sub 2] and for solutions containing dissolved elemental Hgmore » in order to assess the potential for the Bridgeton sediments to act as a conduit for Hg mobilized from the surface. Results of batch equilibrium experiments suggest that dissolved elemental Hg sorbs to Bridgeton sediments by a risk-order kinetic process. Sorption of the Hg proceeded exponentially and equilibrium was reached within 14 hours. The sorption kinetics for the HgCl[sub 2] solutions, however, appear to be of a second or higher order. For this compound sorption to the sediments begins exponentially, but after 6 hours desorption into the water begins to predominate followed by a slower exponential sorption step that requires nearly 36 hours to reach equilibrium. These experiments illustrate the necessity of determining the distribution coefficients of possible source compounds when attempting to evaluate mobilization potential of a contaminant in the unsaturated zone. Moreover, these data also suggest that HgCl[sub 2], a seed dressing for corn, medial bacteriacide, and embalming fluid ingredient, is more mobile in the environment than dissolved elemental Hg. Consequently, the ground water contamination potential appears to be greater for HgCl[sub 2] than for elemental Hg.« less

Locked versus standard unlocked plating of the symphysis pubis in a Type-C pelvic injury: a cadaver biomechanical study.

PubMed

Moed, Berton R; O'Boynick, Christopher P; Bledsoe, J Gary

2014-04-01

The benefits of locked plating for pubic symphyseal disruption have not been established. The purpose of this biomechanical study was to determine whether locked plating offers any advantage over conventional unlocked plating of the pubic symphysis in the vertically unstable, Type-C pelvic injury. In each of eight embalmed cadaver pelvis specimens, sectioning of the pubic symphysis in conjunction with a unilateral release of the sacroiliac, sacrospinous, and sacrotuberous ligaments and pelvic floor was performed to simulate a vertically unstable Type-C (Orthopaedic Trauma Association 61-C1.2) pelvic injury. The disrupted SI joint was then reduced and fixed using two 6.5mm cannulated screws inserted into the S1 body. Using a six-hole 3.5mm plate specifically designed for the symphysis pubis having both locked and unlocked capability, four pelvises were fixed with locked screws and four pelvises were fixed with standard unlocked bicortical screws. Both groups were similar based on a dual-emission X-ray absorptiometry evaluation (P=0.69). Each pelvis was then mounted on a servohydraulic materials-testing apparatus using a bilateral stance model to mainly stress the symphyseal fixation and was cycled up to 1 million cycles or failure, whichever occurred first. Five specimens experienced failure at the jig mounting/S1 vertebral body interface, occurring between 360,000 and 715,000 cycles. Frank failure of the anterior or posterior instrumentation did not occur. However, end-trialing diastasis of the initial pubic symphysis reduction was found in all pelvises. There were no differences between the groups with respect to this loss of symphyseal reduction (P=0.69) or average cycles to failure (P=1.0). Pubic symphyseal locked plating does not appear to offer any advantage over standard unlocked plating for a Type-C (OTA 61-C1.2) pelvic ring injury. Copyright © 2013 Elsevier Ltd. All rights reserved.

Evaluation of the coracoid and coracoacromial arch geometry on Thiel-embalmed cadavers using the three-dimensional MicroScribe digitizer.

PubMed

Alobaidy, Mohammad A; Soames, Roger W

2016-01-01

Understanding the geometry of the coracoid and coracoacromial arch will improve surgical intervention in shoulder surgery. Thirty pairs of scapulae from 20 female and 10 male deceased donors, average age of 82 years (range, 62-101 years), were scanned and measurements taken using the 3-dimensional (3D) MicroScribe digitizer (Immersion Corp, San Jose CA, USA) and Rhino software (McNeel North America, Seattle, WA, USA). The following mean angles were determined: coracoid slope, 44° ± 11°; coracoid deviation, 35° ± 6°; coracoid root to glenoid, 115° ± 14°; coracoid head to glenoid, 110° ± 11°; scapular spine angle, 35° ± 6°; and coracoacromial angle, 63° ± 9°. The following mean distances were also determined: coracoid height, 10 ± 3 mm; coracoacromial distance, 42 ± 7 mm; coracoacromial arch height, 20 ± 5 mm; and coracoid (anterior, 29 ± 6 mm; middle, 20 ± 4 mm; posterior tip, 18 ± 6 mm) to the glenoid fossa. The coracoid root-to-glenoid angle was significantly correlated with the coracoacromial angle. In addition, coracoid slope was significantly correlated with coracoid root-to-glenoid angle and also with coracoid deviation. Left shoulders had a significantly higher coracoid-to-glenoid angle (P < .029) than right shoulders. Women had a significantly higher coracoid root-to-glenoid angle than men (P < .042), and men had a significantly higher coracoid deviation (P < .011), anterior (P < .006) and posterior coracoid-to-glenoid distances (P < .03), and coracoacromial arch height (P < .07) than women. This is the first time that the 3D MicroScribe digitizer has been used to evaluate the geometry of the coracoacromial arch and coracoid process. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Anatomy of the proximal tibiofibular joint and interosseous membrane, and their contributions to joint kinematics in below-knee amputations.

PubMed

Burkhart, Timothy A; Asa, Benjamin; Payne, Michael W C; Johnson, Marjorie; Dunning, Cynthia E; Wilson, Timothy D

2015-02-01

A result of below-knee amputations (BKAs) is abnormal motion that occurs about the proximal tibiofibular joint (PTFJ). While it is known that joint morphology may play a role in joint kinematics, this is not well understood with respect to the PTFJ. Therefore, the purposes of this study were: (i) to characterize the anatomy of the PTFJ and statistically analyze the relationships within the joint; and (ii) to determine the relationships between the PTFJ characteristics and the degree of movement of the fibula in BKAs. The PTFJ was characterized in 40 embalmed specimens disarticulated at the knee, and amputated through the mid-tibia and fibula. Four metrics were measured: inclination angle (angle at which the fibula articulates with the tibia); tibial and fibular articular surface areas; articular surface concavity and shape. The specimens were mechanically tested by applying a load through the biceps femoris tendon, and the degree of motion about the tibiofibular joint was measured. Regression analyses were performed to determine the relationships between the different PTFJ characteristics and the magnitude of fibular abduction. Finally, Pearson correlation analyses were performed on inclination angle and surface area vs. fibular kinematics. The inclination angle measured on the fibula was significantly greater than that measured on the tibia. This difference may be attributed to differences in concavity of the tibial and fibular surfaces. Surface area measured on the tibia and fibula was not statistically different. The inclination angle was not statistically correlated to surface area. However, when correlating fibular kinematics in BKAs, inclination angle was positively correlated to the degree of fibular abduction, whereas surface area was negatively correlated. The characteristics of the PTFJ dictate the amount of fibular movement, specifically, fibular abduction in BKAs. Predicting BKA complications based on PTFJ characteristics can lead to recommendations in treatment. © 2014 Anatomical Society.

Novel femoral artery terminology: integrating anatomy and clinical procedures leading to standardized intuitive nomenclature.

PubMed

Benninger, Brion

2014-10-01

The objective of this study is to investigate the terminology of the femoral artery and recommended alternative terminology that satisfies both anatomy and clinical arenas.The femoral artery (FA) is often defined as the continuation of the external iliac artery. Specifically, when the external iliac artery reaches directly beneath the inguinal ligament, it becomes the FA. Currently, Terminologia Anatomica (TA) records the profunda femoris or deep femoral as a terminal branch. Clinicians often use superficial femoral artery (SFA) rather than FA and profunda or deep FA. SFA is actually very deep and well protected for most of its journey. On observation, the terminology in current use is not intuitive. The objective of this study was to investigate the terminology associated with the anatomical and clinical anatomical interpretations of the FA and its terminal branches and to suggest a more appropriate terminology that addresses the points of view of the macro anatomist, as well as that of the clinician. Literature search was conducted regarding the nomenclature of the FA and its terminal branches. Dissection of 89 embalmed cadavers (49F, 40M, ages 47-89) was conducted to analyze the morphology of the FA and its branches. Perusal of the literature revealed a difference in terminology between anatomical and clinical textbooks/atlases/journals regarding the FA and its terminal branch. Our dissections suggested that the FA may be better defined vis-à-vis its relationship to the anterior and posterior compartments of the thigh. A difference in terminology exists between the anatomical and clinical arenas. A need for a standardized terminology is necessary because clinicians and their publishers have not adopted TA. This study suggests that the current FA be considered the common FA and the continuation of the FA, the SFA be renamed the anterior FA and the current profunda (the deep FA) be renamed the posterior FA, respectively. The proposed terminology mirrors the lower limb anterior/posterior tibial artery terminology. © 2014 Wiley Periodicals, Inc.

A new physiological model for studying the effect of chest compression and ventilation during cardiopulmonary resuscitation: The Thiel cadaver.

PubMed

Charbonney, Emmanuel; Delisle, Stéphane; Savary, Dominique; Bronchti, Gilles; Rigollot, Marceau; Drouet, Adrien; Badat, Bilal; Ouellet, Paul; Gosselin, Patrice; Mercat, Alain; Brochard, Laurent; Richard, Jean-Christophe M

2018-04-01

Studying ventilation and intrathoracic pressure (ITP) induced by chest compressions (CC) during Cardio Pulmonary Resuscitation is challenging and important aspects such as airway closure have been mostly ignored. We hypothesized that Thiel Embalmed Cadavers could constitute an appropriate model. We assessed respiratory mechanics and ITP during CC in 11 cadavers, and we compared it to measurements obtained in 9 out-of-hospital cardiac arrest patients and to predicted values from a bench model. An oesophageal catheter was inserted to assess chest wall compliance, and ITP variation (ΔITP). Airway pressure variation (ΔPaw) at airway opening and ΔITP generated by CC were measured at decremental positive end expiratory pressure (PEEP) to test its impact on flow and ΔPaw. The patient's data were derived from flow and airway pressure captured via the ventilator during resuscitation. Resistance and Compliance of the respiratory system were comparable to those of the out-of-hospital cardiac arrest patients (C RS TEC 42 ± 12 vs C RS PAT 37.3 ± 10.9 mL/cmH 2 O and Res TEC 17.5 ± 7.5 vs Res PAT 20.2 ± 5.3 cmH 2 O/L/sec), and remained stable over time. During CC, ΔITP varied from 32 ± 12 cmH 2 O to 69 ± 14 cmH 2 O with manual and automatic CC respectively. Transmission of ΔITP at the airway opening was significantly affected by PEEP, suggesting dynamic small airway closure at low lung volumes. This phenomenon was similarly observed in patients. Respiratory mechanics and dynamic pressures during CC of cadavers behave as predicted by a theoretical model and similarly to patients. The Thiel model is a suitable to assess ITP variations induced by ventilation during CC. Copyright © 2018 Elsevier B.V. All rights reserved.

Effect of simultaneous stretching of the wrist and finger extensors for lateral epicondylitis: a gross anatomical study of the tendinous origins of the extensor carpi radialis brevis and extensor digitorum communis.

PubMed

Shirato, Rikiya; Wada, Takuro; Aoki, Mitsuhiro; Iba, Kousuke; Kanaya, Kohei; Fujimiya, Mineko; Yamashita, Toshihiko

2015-11-01

Pulling the wrist into flexion with the elbow in extension and forearm in pronation has been used as the stretching technique of wrist extensors for lateral epicondylitis. Simultaneous stretching of the fingers in addition to the wrist flexion has also been applied. However, the mechanism of this simultaneous stretching has not been clarified. This study is designed to clarify the mechanism underlying this simultaneous stretching technique based on the anatomical features of the origins of the extensor carpi radialis brevis (ECRB) and extensor digitorum communis (EDC). Thirty-nine arms from formalin-embalmed Japanese human specimens were dissected. The features of the origins of the ECRB and EDC were macroscopically observed, and the locations of each origin on the lateral epicondyle were measured. The ECRB had a long and wide, purely tendinous origin which originated from the anterior slope of the lateral epicondyle. The tendinous origin of the index finger of the EDC (EDC-IF) arose from the posterior aspect of the ECRB tendinous origin, with a coexisting muscular portion observed at the level of the proximal forearm. The middle finger of the EDC (EDC-MF) had a short tendinous origin with an associated muscular portion and originated proximo-laterally to the origin of the ECRB on the lateral epicondyle. In addition, the muscular origin of the EDC-MF arose on the superficial and posterior aspect of the ECRB tendinous origin. In contrast, the ring and little fingers of the EDC originated from the tendinous septum of the extensor digiti minimi and extensor carpi ulnaris, and had no connection with the ECRB tendinous origin. On the basis of our anatomical findings, simultaneous stretching of the wrist extensors by wrist, index and middle fingers flexion could provide stretching force to both the tendinous origins of the ECRB and EDC through the EDC-IF and EDC-MF.

Case report: hydroquinone and/or glutaraldehyde induced acute myeloid leukaemia?

PubMed Central

Makropoulos , Vassilios; Alexopoulos, Evangelos C

2006-01-01

Background Exposures to high doses of irradiation, to chemotherapy, benzene, petroleum products, paints, embalming fluids, ethylene oxide, herbicides, pesticides, and smoking have been associated with an increased risk of acute myelogenous leukemia (AML). Although there in no epidemiological evidence of relation between X-ray developer, fixer and replenisher liquids and AML, these included glutaraldehyde which has weakly associated with lymphocytic leukemia in rats and hydroquinone has been increasingly implicated in producing leukemia, causing DNA and chromosomal damage, inhibits topo-isomerase II, alter hematopoiesis and inhibit apoptosis of neoplastic cells. Case presentation Two white females (A and B) hired in 1985 as medical radiation technologists in a primary care center, in Greece. In July 2001, woman A, 38-years-old, was diagnosed as having acute monocytic leukaemia (FAB M5). The patient did not respond to therapy and died threeweeks later. In August 2001, woman B, 35-year-old, was diagnosed with acute promyelocytic leukaemia (FAB M3). Since discharge, she is in continuous complete remission. Both women were non smokers without any medical history. Shortly after these incidents official inspectors and experts inspected workplace, examined equipment, archives of repairs, notes, interviewed and monitored employees. They concluded that shielding was inadequate for balcony's door but personal monitoring did not show any exceeding of TLV of 20 mSv yearly and cytogenetics analysis did not reveal findings considered to be characteristics of ionizing exposure. Equipment for developing photos had a long list of repairs, mainly leakages of liquids and increases of temperature. On several occasions the floor has been flooded especially during 1987–1993 and 1997–2001. Inspection confirmed a complete lack of ventilation and many spoiled medical x-ray films. Employees reported that an "osmic" level was continuously evident and frequently developed symptoms of respiratory irritation and dizziness. Conclusion The findings support the hypothesis that the specific AML cases might have originated from exposure to chemicals, especially hydroquinone and/or glutaraldehyde. The report also emphasises the crucial role of inspection of facilities and enforcement of compliance with regulations in order to prevent similar incidents. PMID:16872480

The surgical anatomy of the infrapatellar branch of the saphenous nerve in relation to incisions for anteromedial knee surgery.

PubMed

Kerver, A L A; Leliveld, M S; den Hartog, D; Verhofstad, M H J; Kleinrensink, G J

2013-12-04

Iatrogenic injury to the infrapatellar branch of the saphenous nerve is a common complication of surgical approaches to the anteromedial side of the knee. A detailed description of the relative anatomic course of the nerve is important to define clinical guidelines and minimize iatrogenic damage during anterior knee surgery. In twenty embalmed knees, the infrapatellar branch of the saphenous nerve was dissected. With use of a computer-assisted surgical anatomy mapping tool, safe and risk zones, as well as the location-dependent direction of the nerve, were calculated. The location of the infrapatellar branch of the saphenous nerve is highly variable, and no definite safe zone could be identified. The infrapatellar branch runs in neither a purely horizontal nor a vertical course. The course of the branch is location-dependent. Medially, it runs a nearly vertical course; medial to the patellar tendon, it has a -45° distal-lateral course; and on the patella and patellar tendon, it runs a close to horizontal-lateral course. Three low risk zones for iatrogenic nerve injury were identified: one is on the medial side of the knee, at the level of the tibial tuberosity, where a -45° oblique incision is least prone to damage the nerves, and two zones are located medial to the patellar apex (cranial and caudal), where close to horizontal incisions are least prone to damage the nerves. The infrapatellar branch of the saphenous nerve is at risk for iatrogenic damage in anteromedial knee surgery, especially when longitudinal incisions are made. There are three low risk zones for a safer anterior approach to the knee. The direction of the infrapatellar branch of the saphenous nerve is location-dependent. To minimize iatrogenic damage to the nerve, the direction of incisions should be parallel to the direction of the nerve when technically possible. These findings suggest that iatrogenic damage of the infrapatellar branch of the saphenous nerve can be minimized in anteromedial knee surgery when both the location and the location-dependent direction of the nerve are considered when making the skin incision.

Surgical anatomy of the sural and superficial fibular nerves with an emphasis on the approach to the lateral malleolus

PubMed Central

SOLOMON, L. B.; FERRIS, L.; TEDMAN, R.; HENNEBERG, M.

2001-01-01

The aim of this study was to investigate the risk and to analyse the significance of laceration of the sural and superficial fibular nerves during the surgical approach to the lateral malleolus. The sural and the superficial fibular nerves, and their branches were dissected under ×3 magnifying lenses in 68 embalmed leg-ankle-foot specimens. The specimens were measured, drawn and photographed. In 35% of specimens the superficial fibular nerve branched before piercing the crural fascia, and in all these specimens the medial dorsal cutaneous nerve of the foot was located in the anterior compartment while the intermediate dorsal cutaneous nerve of the foot was located in the lateral compartment. In 35% of specimens the intermediate dorsal cutaneous nerve of the foot was absent or did not innervate any toe. The deep part of the superficial fibular nerve was in contact with the intermuscular septum. Its superficial part was parallel with the lateral malleolus when the nerve pierced the fascia more proximally and oblique to the lateral malleolus when the nerve pierced the fascia distally. In one case the intermediate dorsal cutaneous nerve of the foot was in danger of laceration during a subcutaneous incision to the lateral malleolus. In 7 cases (10%) the sural nerve overlapped or was tangent to the tip of the malleolus. Malleolar nerve branches were identified in 76% of the cases (in 28% from both sources). The sural nerve supplies the lateral 5 dorsal digital nerves in 40% of cases. Our study indicates that during the approach to the lateral malleolus there is a high risk of laceration of malleolar branches from both the sural and the superficial fibular nerves. There is less risk of damage to the main trunk of these nerves, but the 10% chance of laceration of sural nerve at the tip of the malleolus is significant. As the sural nerve supplies the superficial innervation to the lateral half of the foot and toes in 40% of cases, the risk of its laceration is even more important than indicated by the common anatomical teaching. PMID:11787825

The posterior cruciate ligament: a study on its bony and soft tissue anatomy using novel 3D CT technology.

PubMed

Van Hoof, Tom; Cromheecke, Michiel; Tampere, Thomas; D'herde, Katharina; Victor, Jan; Verdonk, Peter C M

2013-05-01

The bony insertion sites of the PCL have been studied and described extensively using 2D technology such as macroscopic images, plain radiograph, computerized tomography (CT) and MRI. The purpose of this study is to visualize both the tibial and the femoral bony insertion sites but also the soft tissue anatomy of the native PCL using novel 3D CT imaging. In addition, new concepts of best-fit cylinder and central axis are introduced and evaluated. Nine unpaired knees of embalmed cadavers were used in this study. Following the dissection process, the PCL was injected with a contrast medium for computed tomography (CT) imaging. The obtained CT images were segmented and rendered in 3D allowing morphological and morphometric analysis of PCL. Femoral and tibial footprint surface area, best-fit PCL-cylinder intersection area, best-fit PCL-cylinder/footprint coverage ratio, best-fit PCL-cylinder central axis projections at the tibial and femoral footprint were used to describe the anatomy of the PCL. Mean footprint surface area of the tibial and femoral footprint were 189.1 and 293.3 mm², respectively. The mean diameter of the best-fit cylinder was 10.5 mm. The mean coverage of the best-fit cylinder on the tibial and femoral footprint was 76.5 and 46.5, respectively. The best-fit cylinder central axis was located in the anterolateral AL bundle footprint on the femur and more centrally in the PCL footprint on the tibia. This study is the first to describe the detailed anatomy of the human PCL with respect to its course and footprints using a 3D approach. It confirms the large difference between the tibial and the femoral footprint area with the former being significantly smaller. In addition, a large inter-patient variability is observed. The best-fit cylinder and central axis concept offer additional insights into the optimal tunnel placement at the tibia and femoral footprint in order to cover the largest portion of the native PCL soft tissue.

Macroscopic and microscopic analysis of the thumb carpometacarpal ligaments: a cadaveric study of ligament anatomy and histology.

PubMed

Ladd, Amy L; Lee, Julia; Hagert, Elisabet

2012-08-15

Stability and mobility represent the paradoxical demands of the human thumb carpometacarpal joint, yet the structural origin of each functional demand is poorly defined. As many as sixteen and as few as four ligaments have been described as primary stabilizers, but controversy exists as to which ligaments are most important. We hypothesized that a comparative macroscopic and microscopic analysis of the ligaments of the thumb carpometacarpal joint would further define their role in joint stability. Thirty cadaveric hands (ten fresh-frozen and twenty embalmed) from nineteen cadavers (eight female and eleven male; average age at the time of death, seventy-six years) were dissected, and the supporting ligaments of the thumb carpometacarpal joint were identified. Ligament width, length, and thickness were recorded for morphometric analysis and were compared with use of the Student t test. The dorsal and volar ligaments were excised from the fresh-frozen specimens and were stained with use of a triple-staining immunofluorescent technique and underwent semiquantitative analysis of sensory innervation; half of these specimens were additionally analyzed for histomorphometric data. Mixed-effects linear regression was used to estimate differences between ligaments. Seven principal ligaments of the thumb carpometacarpal joint were identified: three dorsal deltoid-shaped ligaments (dorsal radial, dorsal central, posterior oblique), two volar ligaments (anterior oblique and ulnar collateral), and two ulnar ligaments (dorsal trapeziometacarpal and intermetacarpal). The dorsal ligaments were significantly thicker (p < 0.001) than the volar ligaments, with a significantly greater cellularity and greater sensory innervation compared with the anterior oblique ligament (p < 0.001). The anterior oblique ligament was consistently a thin structure with a histologic appearance of capsular tissue with low cellularity. The dorsal deltoid ligament complex is uniformly stout and robust; this ligament complex is the thickest morphometrically, has the highest cellularity histologically, and shows the greatest degree of sensory nerve endings. The hypocellular anterior oblique ligament is thin, is variable in its location, and is more structurally consistent with a capsular structure than a proper ligament.

Sports Injury-Related Fingers and Thumb Deformity Due to Tendon or Ligament Rupture.

PubMed

Bai, Rong-Jie; Zhang, Hui-Bo; Zhan, Hui-Li; Qian, Zhan-Hua; Wang, Nai-Li; Liu, Yue; Li, Wen-Ting; Yin, Yu-Ming

2018-05-05

Hand injuries are very common in sports, such as skiing and ball sports. One of the major reasons causing hand and finger deformity is due to ligament and tendon injury. The aim of this study was to investigate if the high-resolution 3T magnetic resonance imaging (MRI) can demonstrate the complex anatomy of the fingers and thumb, especially the tendons and ligaments, and provide the accurate diagnosis of clinically important fingers and thumbs deformity due to ligamentous and tendinous injuries during sport activities. Sixteen fresh un-embalmed cadaveric hands were harvested from eight cadavers. A total of 20 healthy volunteers' hands and 44 patients with fingers or thumb deformity due to sports-related injuries were included in this study. All subjects had MR examination with T1-weighted images and proton density-weighted imaging with fat suppression (PD FS) in axial, coronal, and sagittal plane, respectively. Subsequently, all 16 cadaveric hands were sliced into 2-mm thick slab with a band saw (six in coronal plane, six in sagittal plane, and four in axial plane). The correlation of anatomic sections and the MRI characteristics of tendons of fingers and the ulnar collateral ligament (UCL) at the metacarpal phalangeal joint (MCPJ) of thumb between 20 healthy volunteers and 44 patients (confirmed by surgery) were analyzed. The normal ligaments and tendons in 16 cadaveric hands and 20 volunteers' hands showed uniform low-signal intensity on all the sequences of the MRI. Among 44 patients with tendinous and ligamentous injuries in the fingers or thumb, 12 cases with UCL injury at MCPJ of the thumb (Stener lesion = 8 and non-Stener lesion = 4), 6 cases with the central slip injury, 12 cases with terminal tendon injury, and 14 cases with flexor digitorum profundus injury. The ligaments and tendons disruption manifested as increased signal intensity and poor definition, discontinuity, and heterogeneous signal intensity of the involved ligaments and tendons. Sports injury-related fingers and thumb deformity are relatively common. MRI is an accurate method for evaluation of the anatomy and pathologic conditions of the fingers and thumb. It is a useful tool for accurate diagnosis of the sports-related ligaments and tendons injuries in hand.

Relative device stability of anterior versus axillary needle decompression for tension pneumothorax during casualty movement: Preliminary analysis of a human cadaver model.

PubMed

Leatherman, Matthew L; Held, Jenny M; Fluke, Laura M; McEvoy, Christian S; Inaba, Kenji; Grabo, Daniel; Martin, Matthew J; Earley, Angela S; Ricca, Robert L; Polk, Travis M

2017-07-01

Tension pneumothorax (tPTX) remains a significant cause of potentially preventable death in military and civilian settings. The current prehospital standard of care for tPTX is immediate decompression with a 14-gauge 8-cm angiocatheter; however, failure rates may be as high as 17% to 60%. Alternative devices, such as 10-gauge angiocatheter, modified Veress needle, and laparoscopic trocar, have shown to be potentially more effective in animal models; however, little is known about the relative insertional safety or mechanical stability during casualty movement. Seven soft-embalmed cadavers were intubated and mechanically ventilated. Chest wall thickness was measured at the second intercostal space at the midclavicular line (2MCL) and the fifth intercostal space along the anterior axillary line (5AAL). CO2 insufflation created a PTX, and needle decompression was then performed with a randomized device. Insertional depth was measured between hub and skin before and after simulated casualty transport. Thoracoscopy was used to evaluate for intrapleural placement and/or injury during insertion and after movement. Cadaver demographics, device displacement, device dislodgment, and injuries were recorded. Three decompressions were performed at each site (2MCL/5AAL), totaling 12 events per cadaver. Eighty-four decompressions were performed. Average cadaver age was 59 years, and body mass index was 24 kg/m. The CWT varied between cadavers because of subcutaneous emphysema, but the average was 39 mm at the 2MCL and 31 mm at the 5AAL. Following movement, the 2MCL site was more likely to become dislodged than the 5AAL (67% vs. 17%, p = 0.001). Median displacement also differed between 2MCL and 5AAL (23 vs. 2 mm, p = 0.001). No significant differences were noted in dislodgement or displacement between devices. Five minor lung injuries were noted at the 5AAL position. Preliminary results from this human cadaver study suggest the 5AAL position is a more stable and reliable location for thoracic decompression of tPTX during combat casualty transport. Therapeutic study, level III.

2D and 3D assessment of sustentaculum tali screw fixation with or without Screw Targeting Clamp.

PubMed

De Boer, A Siebe; Van Lieshout, Esther M M; Vellekoop, Leonie; Knops, Simon P; Kleinrensink, Gert-Jan; Verhofstad, Michael H J

2017-12-01

Precise placement of sustentaculum tali screw(s) is essential for restoring anatomy and biomechanical stability of the calcaneus. This can be challenging due to the small target area and presence of neurovascular structures on the medial side. The aim was to evaluate the precision of positioning of the subchondral posterior facet screw and processus anterior calcanei screw with or without a Screw Targeting Clamp. The secondary aim was to evaluate the added value of peroperative 3D imaging over 2D radiographs alone. Twenty Anubifix™ embalmed, human anatomic lower limb specimens were used. A subchondral posterior facet screw and a processus anterior calcanei screw were placed using an extended lateral approach. A senior orthopedic trauma surgeon experienced in calcaneal fracture surgery and a senior resident with limited experience in calcaneal surgery performed screw fixation in five specimens with and in five specimens without the clamp. 2D lateral and axial radiographs and a 3D recording were obtained postoperatively. Anatomical dissection was performed postoperatively as a diagnostic golden standard in order to obtain the factual screw positions. Blinded assessment of quality of fixation was performed by two surgeons. In 2D, eight screws were considered malpositioned when placed with the targeting device versus nine placed freehand. In 3D recordings, two additional screws were malpositioned in each group as compared to the golden standard. As opposed to the senior surgeon, the senior resident seemed to get the best results using the Screw Targeting Clamp (number of malpositioned screws using freehand was eight, and using the targeting clamp five). In nine out of 20 specimens 3D images provided additional information concerning target area and intra-articular placement. Based on the 3D assessment, five additional screws would have required repositioning. Except for one, all screw positions were rated equally after dissection when compared with 3D examinations. This study does not show a substantial benefit between the Screw Targeting Clamp and the freehand technique as well between experienced and inexperienced surgeons. Data suggest that the clamp might help positioning sustentaculum tali screws, especially for inexperienced surgeons. Perioperative 3D recordings facilitate identification of malpositioned screws. Copyright © 2017 Elsevier Ltd. All rights reserved.

Morphological changes in the cervical intervertebral foramen dimensions with unilateral facet joint dislocation.

PubMed

Ebraheim, Nabil A; Liu, Jiayong; Ramineni, Satheesh K; Liu, Xiaochen; Xie, Joe; Hartman, Ryan G; Goel, Vijay K

2009-11-01

Many investigators have conducted studies to determine the biomechanics, causes, complications and treatment of unilateral facet joint dislocation in the cervical spine. However, there is no quantitative data available on morphological changes in the intervertebral foramen of the cervical spine following unilateral facet joint dislocation. These data are important to understand the cause of neurological compromise following unilateral facet joint dislocation. Eight embalmed human cadaver cervical spine specimens ranging from level C1-T1 were used. The nerve roots of these specimens at C5-C6 level were marked by wrapping a 0.12mm diameter wire around them. Unilateral facet dislocation at C5-C6 level was simulated by serially sectioning the corresponding ligamentous structures. A CT scan of the specimens was obtained before and after the dislocation was simulated. A sagittal plane through the centre of the pedicle and facet joint was constructed and used for measurement. The height and area of the intervertebral foramen, the facet joint space, nerve root diameter and area, and vertebral alignment both before and after dislocation were evaluated. The intervertebral foramen area changed from 50.72+/-0.88mm(2) to 67.82+/-4.77mm(2) on the non-dislocated side and from 41.39+/-1.11mm(2) to 113.77+/-5.65mm(2) on the dislocated side. The foraminal heights changed from 9.02+/-0.30mm to 10.52+/-0.50mm on the non-dislocated side and 10.43+/-0.50mm to 17.04+/-0.96mm on the dislocated side. The facet space area in the sagittal plane changed from 6.80+/-0.80mm(2) to 40.02+/-1.40mm(2) on the non-dislocated side. The C-5 anterior displacement showed a great change from 0mm to 5.40+/-0.24mm on the non-dislocated side and from 0mm to 3.42+/-0.20mm on the dislocated side. Neither of the nerve roots on either side showed a significant change in size. The lack of change in nerve root area indicates that the associated nerve injury with unilateral facet joint dislocation is probably due to distraction rather than due to direct nerve root compression.

The surgical vascular anatomy of the minimally invasive lateral lumbar interbody approach: a cadaveric and radiographic analysis.

PubMed

Alkadhim, Mustafa; Zoccali, Carmine; Abbasifard, Salman; Avila, Mauricio J; Patel, Apar S; Sattarov, Kamran; Walter, Christina M; Baaj, Ali A

2015-11-01

The minimally invasive (MI) lateral lumbar interbody fusion (LLIF) approach has become increasingly popular for the treatment of degenerative lumbar spine disease. The neural anatomy of the lumbar plexus has been studied; however, the pertinent surgical vascular anatomy has not been examined in detail. The goal of this study is to examine the vascular structures that are relevant in relation to the MI-LLIF approach. Anatomic dissection of the lumbar spines and associated vasculature was performed in three embalmed, adult cadavers. Right and left surgeon perspective views during LLIF were for a total of six approaches. During the dissection, all vascular elements were noted and photographed, and anatomical relationships to the vertebral bodies and disc spaces were analyzed. In addition, several axial and sagittal MRI images of the lumbar spine were analyzed to complement the cadaveric analysis. The aorta descends along the left anterior aspect of lumbar vertebra with an average distance of 2.1 cm (range 1.9-2.3 cm) to the center of each intervertebral disc. The vena cava descends along the right anterior aspect of lumbar vertebrates with average distance of 1.4 cm (range 1.3-1.6 cm) to the center of the intervertebral disc. Each vertebral body has two lumbar arteries (direct branches from the aorta); one exits to the left and one to the right side of the vertebral body. The lumbar arteries pass underneath the sympathetic trunk, run in the superior margin of the vertebral body and extend all the way across it, with average length of 3.8 cm (range 2.5-5 cm). The mean distance between the arteries and the inferior plate of the superior disc space is 4.2 mm (range 2-5 mm) and mean distance of 3.1 cm (range 2.8-3.8 cm) between two arteries in adjacent vertebrae. One of the cadavers had an expected normal anatomical variation where the left arteries at L3-L4 anastomosed dorsally of the vertebral bodies at the middle of the intervertebral disc. Understanding the vascular anatomy of the lateral and anterior lumbar spine is paramount for successfully and safely executing the LLIF procedure. It is imperative to identify anatomical variations in lumbar arteries and veins with careful assessment of the preoperative imaging.

Reproducibility of a peripheral quantitative computed tomography scan protocol to measure the material properties of the second metatarsal.

PubMed

Chaplais, Elodie; Greene, David; Hood, Anita; Telfer, Scott; du Toit, Verona; Singh-Grewal, Davinder; Burns, Joshua; Rome, Keith; Schiferl, Daniel J; Hendry, Gordon J

2014-07-19

Peripheral quantitative computed tomography (pQCT) is an established technology that allows for the measurement of the material properties of bone. Alterations to bone architecture are associated with an increased risk of fracture. Further pQCT research is necessary to identify regions of interest that are prone to fracture risk in people with chronic diseases. The second metatarsal is a common site for the development of insufficiency fractures, and as such the aim of this study was to assess the reproducibility of a novel scanning protocol of the second metatarsal using pQCT. Eleven embalmed cadaveric leg specimens were scanned six times; three times with and without repositioning. Each foot was positioned on a custom-designed acrylic foot plate to permit unimpeded scans of the region of interest. Sixty-six scans were obtained at 15% (distal) and 50% (mid shaft) of the second metatarsal. Voxel size and scan speed were reduced to 0.40 mm and 25 mm.sec(-1). The reference line was positioned at the most distal portion of the 2(nd) metatarsal. Repeated measurements of six key variables related to bone properties were subject to reproducibility testing. Data were log transformed and reproducibility of scans were assessed using intraclass correlation coefficients (ICC) and coefficients of variation (CV%). Reproducibility of the measurements without repositioning were estimated as: trabecular area (ICC 0.95; CV% 2.4), trabecular density (ICC 0.98; CV% 3.0), Strength Strain Index (SSI) - distal (ICC 0.99; CV% 5.6), cortical area (ICC 1.0; CV% 1.5), cortical density (ICC 0.99; CV% 0.1), SSI - mid shaft (ICC 1.0; CV% 2.4). Reproducibility of the measurements after repositioning were estimated as: trabecular area (ICC 0.96; CV% 2.4), trabecular density (ICC 0.98; CV% 2.8), SSI - distal (ICC 1.0; CV% 3.5), cortical area (ICC 0.99; CV%2.4), cortical density (ICC 0.98; CV% 0.8), SSI - mid shaft (ICC 0.99; CV% 3.2). The scanning protocol generated excellent reproducibility for key bone properties measured at the distal and mid-shaft regions of the 2(nd) metatarsal. This protocol extends the capabilities of pQCT to evaluate bone quality in people who may be at an increased risk of metatarsal insufficiency fractures.

Reproducibility of a peripheral quantitative computed tomography scan protocol to measure the material properties of the second metatarsal

PubMed Central

2014-01-01

Background Peripheral quantitative computed tomography (pQCT) is an established technology that allows for the measurement of the material properties of bone. Alterations to bone architecture are associated with an increased risk of fracture. Further pQCT research is necessary to identify regions of interest that are prone to fracture risk in people with chronic diseases. The second metatarsal is a common site for the development of insufficiency fractures, and as such the aim of this study was to assess the reproducibility of a novel scanning protocol of the second metatarsal using pQCT. Methods Eleven embalmed cadaveric leg specimens were scanned six times; three times with and without repositioning. Each foot was positioned on a custom-designed acrylic foot plate to permit unimpeded scans of the region of interest. Sixty-six scans were obtained at 15% (distal) and 50% (mid shaft) of the second metatarsal. Voxel size and scan speed were reduced to 0.40 mm and 25 mm.sec-1. The reference line was positioned at the most distal portion of the 2nd metatarsal. Repeated measurements of six key variables related to bone properties were subject to reproducibility testing. Data were log transformed and reproducibility of scans were assessed using intraclass correlation coefficients (ICC) and coefficients of variation (CV%). Results Reproducibility of the measurements without repositioning were estimated as: trabecular area (ICC 0.95; CV% 2.4), trabecular density (ICC 0.98; CV% 3.0), Strength Strain Index (SSI) - distal (ICC 0.99; CV% 5.6), cortical area (ICC 1.0; CV% 1.5), cortical density (ICC 0.99; CV% 0.1), SSI – mid shaft (ICC 1.0; CV% 2.4). Reproducibility of the measurements after repositioning were estimated as: trabecular area (ICC 0.96; CV% 2.4), trabecular density (ICC 0.98; CV% 2.8), SSI - distal (ICC 1.0; CV% 3.5), cortical area (ICC 0.99; CV%2.4), cortical density (ICC 0.98; CV% 0.8), SSI – mid shaft (ICC 0.99; CV% 3.2). Conclusions The scanning protocol generated excellent reproducibility for key bone properties measured at the distal and mid-shaft regions of the 2nd metatarsal. This protocol extends the capabilities of pQCT to evaluate bone quality in people who may be at an increased risk of metatarsal insufficiency fractures. PMID:25037451

Anatomic fit of six different radial head plates: comparison of precontoured low-profile radial head plates.

PubMed

Burkhart, Klaus Josef; Nowak, Tobias E; Kim, Yoon-Joo; Rommens, Pol M; Müller, Lars P

2011-04-01

Bulky implants may lead to symptomatic soft tissue irritation after open reduction and internal fixation of radial head and neck fractures. The purpose of our study was to compare the anatomic fit of precontoured radial head plates. We stripped 22 embalmed human cadaveric radiuses of soft tissues. We investigated 6 radial head plates: (1) the Medartis radial head buttress plate (MBP), (2) the Medartis radial head rim plate (MRP), (3) the Synthes radial neck plate (SNP), (4) the Synthes radial head plate (SHP), (5) the Acumed radial head plate (AHP), and (6) the Wright radial head plate (WHP). Each plate was applied to each radial head at the place of best fit within the safe zone. We tested 4 parameters of anatomic fit: (1) plate-to-bone distance, (2) plate contact judged by 3 different observers, (3) pin-subchondral zone distance, and (4) plate-to-bone contact after adjustment of the plates. The MBP and MRP showed the lowest profile by objective measurements, the SNP and AHP had a moderate profile, and the SHP and WHP demonstrated the bulkiest profile. The subjective assessments also demonstrated the best fit for the MBP, a good fit for the SNP, a moderate fit for the MRP and AHP, and a poor fit for the SHP and WHP. The MBP, MRP, and AHP could always provide pin-subchondral zone contact, unlike the SHP, SNP, and WHP. After bending, significant improvement of plate-to-bone distance could only be seen for the MBP, MRP, and WHP. The ranking among plates remained the same except for the WHP, which showed a significantly lower plate-to-bone distance than the SHP. Currently available radial head implants are heterogeneous. The MBP and MRP showed the lowest profile and best anatomic fit. Owing to the complex radial head anatomy, to date there is no one radial head plate that perfectly fits all radial heads. Conformance of existing plates to the radial head and neck is not perfect. Careful plate selection and modification, when necessary, may minimize interference of this hardware with the surrounding soft tissues and facilitate recovery of motion. Copyright © 2011 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Validation of Long Bone Mechanical Properties from Densitometry

NASA Technical Reports Server (NTRS)

Whalen, R.; Katz, B.; Cleek, T.; Hargens, Alan R. (Technical Monitor)

1995-01-01

The objective of this study was to assess whether cross-sectional areal properties, calculated from densitometry, correlate to the true flexural properties. Right and left male embalmed tibiae were used in the study. Prior to scanning, the proximal end of each tibia was potted in a fixture with registration pins, flushed thoroughly with water under pressure to remove trapped air, and then placed in a constant thickness water bath attached to a precision indexer. Two sets of three scans of the entire tibia were taken with an Hologic QDR 1000/W densitometer at rotations of 0, 45, and 90 degrees about the tibia long axis. An aluminum step phantom and a bone step phantom, machined from bovine cortical bone, were also in the bath and scanned separately. Pixel attenuation data from the two sets of scans were averaged to reduce noise. Pixel data from the high energy beam were then converted to equivalent thicknesses using calibration equations. Cross-sectional areal properties (centroid, principal area moments and principal angle) along the length were computed from the three registered scans using methods developed in our laboratory. Flexural rigidities. Four strain gages were bonded around the circumference of each of 5 cross-sections encompassing the entire diaphysis. A known transverse load was then applied to the distal end and the bone was rotated 360 degrees in eight increments of 45 degrees each. Strains from the eight orientations were analyzed along with the known applied bending moments at each section to compute section centroids, curvatures, principal flexural rigidities and principal angle. Reference axes between the two methods were maintained within +/- 0.5 degrees using an electronic inclinometer. Principal angles (flexural - areal) differed by -2.0 +/- 4.0 degrees, and 1.0 +/- 2.5 degrees for the right and left tibia, respectively. Section principal flexural rigidities were highly correlated to principal areal moments (right: r(sup 2)= 0.997; left: r(sup 2)= 0.978) indicating a nearly constant effective flexural modulus. Right and left tibia exhibited a very high degree of symmetry when comparing either flexural or areal properties. To our knowledge this is the first study to validate the use of densitometry (DXA) to predict three dimensional structural properties of long bones. Our initial results support the conclusion that bone mineral and its distribution are the primary determinants of flexural modulus and rigidity.

Systematization of the vesical and uterovaginal efferences of the female inferior hypogastric plexus (pelvic): applications to pelvic surgery on women patients.

PubMed

Mauroy, B; Bizet, B; Bonnal, J L; Crombet, T; Duburcq, T; Hurt, C

2007-04-01

To locate and describe the various efferences of the plexus in order to make it easier to avoid nerve lesions during pelvic surgery on women patients through a better anatomical knowledge of the inferior hypogastric plexus (IHP). We dissected 27 formalin embalmed female anatomical subjects, none of which bore any stigmata of subumbilical surgery. The dissection was always performed using the same technique: identification of the inferior hypogastric plexus, whose posterior superior angle follows on from the hypogastric nerve and whose top, which is anterior and inferior, is located exactly at the ureter's point of entry into the base of the parametrium, underneath the posterior layer of the broad ligament. The IHP is located at the level of the posterior floor of the pelvis, opposite to the sacral concavity. Its top, which is anterior inferior, is at the point of contact with the ureter at its entry into the posterior layer of the broad ligament. The uterovaginal, vesical and rectal efferences originate in the paracervix. Three efferent nerves branch, two of them from its top and the third from its inferior edge: (1) A vaginal nerve, medial to the ureter, follows the uterine artery and divides into two groups: anterior thin, heading for the vagina and the uterus; posterior, voluminous, heading in a superior rectal direction (=superior rectal nerve). (2) A vesical nerve, lateral to the ureter, divides into two groups, lateral and medial. (3) The inferior rectal nerve emerges from the inferior edge of the IHP, between the fourth sacral root and the ureter's point of entry into the base of the parametrium. The ureter is the crucial point of reference for the IHP and its efferences and acts as a real guide for identifying the anterior inferior angle or top of the IHP, the origin of the vaginal nerve, the level of the ureterovesical junction and the division of the vesical nerve into its two medial and lateral branches. Dissecting underneath and inside the ureter and the uterine artery involves a risk of lesion of the vaginal nerve and its uterovaginal branches. Further forward, between the intersection and the ureterovesical junction, dissecting and/or coagulating under the ureter involves a risk of lesions to the vesical nerve, which are likely to explain the phenomena of denervation of the anterior floor encountered after certain hysterectomies and/or surgical treatments of vesicoureteral reflux.

Motion generated in the unstable cervical spine during the application and removal of cervical immobilization collars.

PubMed

Prasarn, Mark L; Conrad, Bryan; Del Rossi, Gianluca; Horodyski, MaryBeth; Rechtine, Glenn R

2012-06-01

Many studies have compared the restriction of motion that immobilization collars provide to the injured victim. No previous investigation has assessed the amount of motion that is generated during the fitting and removal process. The purpose of this study was to compare the three-dimensional motion generated when one-piece and two-piece cervical collars are applied and removed from cadavers intact and with unstable cervical spine injuries. Five fresh, lightly embalmed cadavers were tested three times each with either a one-piece or two-piece cervical collar in the supine position. Testing was performed in the intact state, following creation of a global ligamentous instability at C5-C6. The amount of angular motion resulting from the collar application and removal was measured using a Fastrak, three-dimensional, electromagnetic motion analysis device (Polhemus Inc., Colchester, VT). The measurements recorded in this investigation included maximum values for flexion/extension, axial rotation, medial/lateral flexion, anterior/posterior displacement, axial distraction, and medial/lateral displacement at the level of instability. There was statistically more motion observed with application or removal of either collar following the creation of a global instability. During application, there was a statistically significant difference in flexion/extension between the one-piece (1.8 degrees) and two-piece (2.6 degrees) collars, p = 0.009. There was also a statistically significant difference in anterior/posterior translation between the one-piece (3.6 mm) and two-piece (3.4 mm) collars, p = 0.015. The maximum angulation and displacement during the application of either collar was 3.4 degrees and 4.4 mm. Statistical analysis revealed no significant differences between the one-piece and two-piece collars during the removal process. The maximum angulation and displacement during removal of either collar type was 1.6 degrees and 2.9 mm. There were statistically significant differences in motion between the one-piece and two-piece collars during the application process, but it was only 1.2 degrees in flexion/extension and 0.2 mm in anterior/posterior translation. Overall, the greatest amount of angulation and displacement observed during collar application was 3.4 degrees and 4.4 mm. Although the exact amount of motion that could be deleterious to a cervical spine-injured patient is unknown, collars can be placed and removed with manual in-line stabilization without large displacements. Only trained practitioners should do so and with great care given that some motion in all planes does occur during the process. Copyright © 2012 by Lippincott Williams & Wilkins.

Intra-pelvic pressure changes after pelvic fracture: A cadaveric study quantifying the effect of a pelvic binder and limb bandaging over a bolster.

PubMed

Morris, Rhys; Loftus, Andrew; Friedmann, Yasmin; Parker, Paul; Pallister, Ian

2017-04-01

Unstable pelvic fractures can be life-threatening due to catastrophic haemorrhage. Non-invasive methods of reducing and stabilising these injuries include pelvic binder application and also lower limb bandaging over a knee-flexion bolster. Both of these methods help close the pelvic ring and should tamponade bleeding. This study aimed to quantify the intra-pelvic pressure changes that occurred with 3 different manoeuvres: lower limb bandaging over a bolster; a Trauma Pelvic Orthotic Device (T-POD) pelvic binder, and a combination of both. Following a pilot study with 2 soft embalmed cadavers, a formal study with 6 unembalmed cadavers was performed. For each specimen an unstable pelvic injury was created (OA/OTA 61-C1) by dividing the pelvic ring anteriorly and posteriorly. A 3-4cm manometric water-filled balloon was placed in the retropubic space and connected to a 50ml syringe and water manometer via a 3-way tap. A baseline pressure of 8cmH 2 O (equating to the average central venous pressure) was used for each cadaver. Steady intra-pelvic pressures (more reliably reflecting the pressures achieved following an intervention) were used in the subsequent statistical analysis, using R statistical language and Rstudio. Paired t-test or Wilcoxon's rank sum test were used (depending on the normality of the dataset) to determine the impact of each intervention on the intra-pelvic pressure. The mean steady intra-pelvic pressures were significantly greater than the baseline pressure for each intervention. The binder and limb bandaging over a bolster alone increased the mean steady pelvic pressures significantly to 24 (SE=5) (p<0.036) and 15.5 (SE=2) (p<0.02)cmH 2 O respectively. Combining these interventions further increased the mean steady pressure to 31 (SE=7)cmH 2 O. However, this was not significantly greater than pressures for each of the individual interventions. Both lower limb bandaging over a bolster and pelvic binder application significantly increased intra-pelvic pressure above the baseline pressure. This was further increased through combining these interventions, which could be useful clinically to augment haemorrhage control in these fractures. Lower-limb bandaging over a bolster, and pelvic binder application, both significantly increased intra-pelvic pressures, and were greatest in combination. These findings support the use of these techniques to facilitate non-surgical haemorrhage control. Copyright © 2017 Elsevier Ltd. All rights reserved.

Gross anatomical and dimensional characteristics of the proximal hamstring origin.

PubMed

Feucht, Matthias J; Plath, Johannes E; Seppel, Gernot; Hinterwimmer, Stefan; Imhoff, Andreas B; Brucker, Peter U

2015-09-01

The current study was undertaken to better define the gross anatomical and dimensional characteristics of the proximal hamstring origin. Twelve paired whole-lower extremities from six embalmed cadavers were dissected. The gross anatomy of the proximal hamstrings was studied. With the tendons attached to the ischial tuberosity, the width and thickness of each tendon was measured 1 cm distally to their origin, and the distance from the most proximal border of the common origin of the semitendinosus (ST) and long head of the biceps (LB) to their distal junction was assessed. After removal of the hamstring group, the shape, orientation, and dimension of the tendon footprints were determined. One cadaver demonstrated unique anatomy, which was considered as an anatomic variant and was therefore excluded from the study group. The ST and LB had a common origin on the posterolateral aspect of the ischial tuberosity (ST/LB), whereas the semimembranosus (SM) had a separated origin at the anterolateral aspect. The mean distance from the most proximal border of the ST/LB origin to the distal junction was 10.0 ± 1.3 cm. The shape of both footprints was longitudinal-oval, with the longitudinal axes of the SM and ST/LB footprints parallel aligned. Mean tendon width was 3.4 ± 0.5 cm for the common ST/LB complex and 4.2 ± 0.9 cm for the SM (p = 0.009). The corresponding values for tendon thickness were 1.0 ± 0.3 cm (ST/LB) and 0.8 ± 0.2 cm (SM), respectively (n.s.). Mean footprint length was 3.9 ± 0.4 cm for ST/LB and 4.5 ± 0.5 cm for SM (p = 0.002). The corresponding values for footprint height were 1.4 ± 0.5 cm (ST/LB) and 1.2 ± 0.3 cm (SM), respectively (n.s.). The ST and LB had a common origin, whereas the SM originated separately. The site of origin of both tendons was the lateral aspect of the ischial tuberosity, with the SM footprint lying directly anterior to the footprint of the ST/LB complex. The footprint of the SM was significantly wider than the footprint of the ST/LB. The reported gross anatomic findings and dimensions may aid surgeons in anchor placement at the anatomical attachment site, thereby facilitating anatomic hamstring repair. In addition, the provided data may improve diagnosis and conservative treatment of proximal hamstring tendinopathy, since detailed knowledge about the normal anatomy is crucial for recognizing tendon abnormalities and for several conservative treatment modalities such as shockwave application or ultrasound-guided injections.

Comparing different post-mortem human samples as DNA sources for downstream genotyping and identification.

PubMed

Calacal, Gayvelline C; Apaga, Dame Loveliness T; Salvador, Jazelyn M; Jimenez, Joseph Andrew D; Lagat, Ludivino J; Villacorta, Renato Pio F; Lim, Maria Cecilia F; Fortun, Raquel D R; Datar, Francisco A; De Ungria, Maria Corazon A

2015-11-01

The capability of DNA laboratories to perform genotyping procedures from post-mortem remains, including those that had undergone putrefaction, continues to be a challenge in the Philippines, a country characterized by very humid and warm conditions all year round. These environmental conditions accelerate the decomposition of human remains that were recovered after a disaster and those that were left abandoned after a crime. When considerable tissue decomposition of human remains has taken place, there is no other option but to extract DNA from bone and/or teeth samples. Routinely, femur shafts are obtained from recovered bodies for human identification because the calcium matrix protects the DNA contained in the osteocytes. In the Philippines, there is difficulty in collecting femur samples after natural disasters or even human-made disasters, because these events are usually characterized by a large number of fatalities. Identification of casualties is further delayed by limitation in human and material resources. Hence, it is imperative to test other types of biological samples that are easier to collect, transport, process and store. We analyzed DNA that were obtained from body fluid, bone marrow, muscle tissue, clavicle, femur, metatarsal, patella, rib and vertebral samples from five recently deceased untreated male cadavers and seven male human remains that were embalmed, buried for ∼ 1 month and then exhumed. The bodies had undergone different environmental conditions and were in various stages of putrefaction. A DNA extraction method utilizing a detergent-washing step followed by an organic procedure was used. The utility of bone marrow and vitreous fluid including bone marrow and vitreous fluid that was transferred on FTA(®) cards and subjected to autosomal STR and Y-STR DNA typing were also evaluated. DNA yield was measured and the presence or absence of PCR inhibitors in DNA extracts was assessed using Plexor(®)HY. All samples were amplified using PowerPlex(®)21 and PowerPlexY(®)23 systems and analyzed using the AB3500 Genetic Analyzer and the GeneMapper(®) ID-X v.1.2 software. PCR inhibitors were consistently detected in bone marrow, muscle tissue, rib and vertebra samples. Amplifiable DNA was obtained in a majority of the samples analyzed. DNA recovery from 0.1g biological material was adequate for successful genotyping of most of the non-bone and bone samples. Complete DNA profiles were generated from bone marrow, femur, metatarsal and patella with 0.1 ng DNA template. Using 0.5 ng DNA template resulted in increased allele recovery and improved intra- and inter-locus peak balance. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Evidence Suggesting that the Buccal and Zygomatic Branches of the Facial Nerve May Contain Parasympathetic Secretomotor Fibers to the Parotid Gland by Means of Communications from the Auriculotemporal Nerve.

PubMed

Tansatit, Tanvaa; Apinuntrum, Prawit; Phetudom, Thavorn

2015-12-01

The auriculotemporal nerve is one of the peripheral nerves that communicates with the facial nerve. However, the function of these communications is poorly understood. Details of how these communications form and connect with each other are still unclear. In addition, a reliable anatomical landmark for locating these communications during surgery has not been sufficiently described. Microdissection was performed on 20 lateral hemifaces of 10 soft-embalmed cadavers to investigate facial-auriculotemporal nerve communications with emphasis on determining their function. The auriculotemporal nerve was identified in the retromandibular space and traced towards its terminations. The communicating branches were followed and the anatomical relationships to surrounding structures observed. The auriculotemporal nerve is suspended above the maxillary artery in the dense retromandibular fascia behind the mandibular ramus. It forms a knot and fans out, providing multiple branches in all directions in the sagittal plane. Inferiorly, it connects the maxillary periarterial plexus, while minute branches supply the temporomandibular joint anteriorly. The larger branches mainly communicate with the branches of the temporofacial division of the facial nerve, and the auricular branches enter the fascia of the auricular cartilage posteriorly. The temporal branches and occasionally the zygomatic branches arise superiorly to distribute within the temporoparietal fascia. The auriculotemporal nerve forms the parotid retromandibular plexus through two types of communication. It sends one to three branches to join the zygomatic and buccal branches of the facial nerve at the branching area of the temporofacial division. It also communicates with the periarterial plexus of the superficial temporal and maxillary arteries. This plexus continues anteriorly along the branches of the facial nerve and the periarterial plexus of the transverse facial artery as the parotid periductal autonomic plexus, supplying the branches of the parotid duct within the loop of the two main divisions of the parotid gland. A single cutaneous zygomatic branch arising from the auriculotemporal nerve in some specimens, the intraparotid communications with the zygomatic and the buccal trunks of the facial nerve, the retromandibular communications with the superficial temporal-maxillary periarterial plexuses, and the periductal autonomic plexus between the loop of the two main facial divisions lead to the suggestion that these communications of the auriculotemporal nerve convey the secretomotor to the zygomatic and buccal branches of the facial nerve. This journal requires that authors assign a level of evidence to each submission to which Evidence-Based Medicine rankings are applicable. This excludes Review Articles, Book Reviews, and manuscripts that concern Basic Science, Animal Studies, Cadaver Studies, and Experimental Studies. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.

Non-invasive quantification of lower limb mechanical alignment in flexion

PubMed Central

Deakin, Angela; Fogg, Quentin A.; Picard, Frederic

2014-01-01

Objective Non-invasive navigation techniques have recently been developed to determine mechanical femorotibial alignment (MFTA) in extension. The primary aim of this study was to evaluate the precision and accuracy of an image-free navigation system with new software designed to provide multiple kinematic measurements of the knee. The secondary aim was to test two types of strap material used to attach optical trackers to the lower limb. Methods Seventy-two registrations were carried out on 6 intact embalmed cadaveric specimens (mean age: 77.8 ± 12 years). A validated fabric strap, bone screws and novel rubber strap were used to secure the passive tracker baseplate for four full experiments with each knee. The MFTA angle was measured under the conditions of no applied stress, valgus stress, and varus stress. These measurements were carried out at full extension and at 30°, 40°, 50° and 60° of flexion. Intraclass correlation coefficients, repeatability coefficients, and limits of agreement (LOA) were used to convey precision and agreement in measuring MFTA with respect to each of the independent variables, i.e., degree of flexion, applied coronal stress, and method of tracker fixation. Based on the current literature, a repeatability coefficient and LOA of ≤3° were deemed acceptable. Results The mean fixed flexion for the 6 specimens was 12.8° (range: 6–20°). The mean repeatability coefficient measuring MFTA in extension with screws or fabric strapping of the baseplate was ≤2°, compared to 2.3° using rubber strapping. When flexing the knee, MFTA measurements taken using screws or fabric straps remained precise (repeatability coefficient ≤3°) throughout the tested range of flexion (12.8–60°); however, using rubber straps, the repeatability coefficient was >3° beyond 50° flexion. In general, applying a varus/valgus stress while measuring MFTA decreased precision beyond 40° flexion. Using fabric strapping, excellent repeatability (coefficient ≤2°) was observed until 40° flexion; however, beyond 50° flexion, the repeatability coefficient was >3°. As was the case with precision, agreement between the invasive and non-invasive systems was satisfactory in extension and worsened with flexion. Mean limits of agreement between the invasive and non-invasive system using fabric strapping to assess MFTA were 3° (range: 2.3–3.8°) with no stress applied and 3.9° (range: 2.8–5.2°) with varus and valgus stress. Using rubber strapping, the corresponding values were 4.4° (range: 2.8–8.5°) with no stress applied, 5.5° (range: 3.3–9.0°) with varus stress, and 5.6° (range: 3.3–11.9°) with valgus stress. Discussion Acceptable precision and accuracy may be possible when measuring knee kinematics in early flexion using a non-invasive system; however, we do not believe passive trackers should be mounted with rubber strapping such as was used in this study. Flexing the knee appears to decrease the precision and accuracy of the system. The functions of this new software using image-free navigation technology have many potential clinical applications, including assessment of bony and soft tissue deformity, pre-operative planning, and post-operative evaluation, as well as in further pure research comparing kinematics of the normal and pathological knee. PMID:24856249

Clinical anatomy of the pelvic floor.

PubMed

Fritsch, H; Lienemann, A; Brenner, E; Ludwikowski, B

2004-01-01

The study presented here comparing cross-sectional anatomy of the fetal and the adult pelvic connective tissue with the results of modern imaging techniques and actual surgical techniques shows that the classical concepts concerning the subdivision of the pelvic connective tissue and muscles need to be revised. According to clinical requirements, the subdivision of the pelvic cavity into anterior, posterior, and middle compartments is feasible. Predominating connecting tissue structures within the different compartments are: Paravisceral fat pad within the anterior compartment (Fig. 17, I), rectal adventitia or perirectal tissue within the posterior compartment (Fig. 17, II), and uterosacral ligaments within the middle compartment. The nerve-vessel guiding plate can be found in all of these compartments; it starts within the posterior compartment and it ends within the anterior one. It constitutes the morphological border between the anterior and posterior compartments in the male. This border is supplied by the uterosacral ligaments in the female. Whereas in gross anatomy no further border is discernable between anterior and posterior or middle compartment, the rectal fascia (hardly visible in embalmed cadavers) demarcates the rectal adventitia and is one of the most important pelvic structures for the surgeon. In principle, the outlined subdivision of the pelvic connective tissue is identical in the male and in the female; facts that become clear from early human life and that are already established during this period (Fig. 18). The uterus is interposed between the bladder and rectum and subdivides the pelvic peritoneum into two pouches thus establishing the only real difference between male and female pelvic cavity. The preferential direction of the pelvic connective tissue fibers is not changed by the interposition of the uterovaginal complex. The pelvic floor muscles are composed of the portions of the levator ani muscle, the muscles of the cavernous organs and the deep transverse perineal muscle in the male. The latter does not exist in the female. We have clearly shown that the different muscles can already be found in early human life and that they are never intermingled with the muscular walls of the pelvic organs. The levator ani muscle of the female, however, is intermingled with connective tissue long before the female sexual hormones exert influence. We have also shown that the distinct sexual differences within the pelvic floor muscles as well as within the sphincter muscles can already be found in early human life. Both the external urethral and the external anal sphincter muscles are not completely circular. The external anal sphincter is intimately connected with the internal sphincter as well as with the longitudinal muscle. Whereas the innervation and function of the urethral sphincter muscles are mostly clear, cloacal development, innervation, and function of all parts of anal sphincter complex are not completely clarified. As to the support of the pelvic viscera, we believe that intact pelvic floor muscles, an undisturbed topography of the pelvic organs, and an undisturbed perineum are of more importance than the so-called pelvic ligaments. Our hypothesis points to the fact that the support of pelvic viscera is multistructural. Thus in pelvic surgery, a lot of techniques have to be revised with the aim to preserve or to reconstruct all the structures mentioned. This is a multidisciplinary task that can only be solved by cooperation of morphologists, urologists, gynecologists, and coloproctologic surgeons or by creating a multidisciplinary pelvic floor specialist.

Use and trade of bitumen in antiquity and prehistory: molecular archaeology reveals secrets of past civilizations

PubMed Central

Connan, J.

1999-01-01

Natural asphalt (or bitumen) deposits, oil seepage and liquid oil shows are widespread in the Middle East, especially in the Zagros mountains of Iran. Ancient people from northern Iraq, south-west Iran and the Dead Sea area extensively used this ubiquitous natural resource until the Neolithic period (7000 to 6000 BC). Evidence of earlier use has been recently documented in the Syrian desert near El Kown, where bitumen-coated flint implements, dated to 40,000 BC (Mousterian period), have been unearthed. This discovery at least proves that bitumen was used by Neanderthal populations as hafting material to fix handles to their flint tools. Numerous testimonies, proving the importance of this petroleum-based material in Ancient civilizations, were brought to light by the excavations conducted in the Near East as of the beginning of the century. Bitumen remains show a wide range of uses that can be classified under several headings. First of all, bitumen was largely used in Mesopotamia and Elam as mortar in the construction of palaces (e.g. the Darius Palace in Susa), temples, ziggurats (e.g. the so-called 'Tower of Babel' in Babylon), terraces (e.g. the famous 'Hanging Gardens of Babylon') and exceptionally for roadway coating (e.g. the processional way of Babylon). Since the Neolithic, bitumen served to waterproof containers (baskets, earthenware jars, storage pits), wooden posts, palace grounds (e.g. in Mari and Haradum), reserves of lustral waters, bathrooms, palm roofs, etc. Mats, sarcophagi, coffins and jars, used for funeral practices, were often covered and sealed with bitumen. Reed and wood boats were also caulked with bitumen. Abundant lumps of bituminous mixtures used for that particular purpose have been found in storage rooms of houses at Ra's al-Junayz in Oman. Bitumen was also a widespread adhesive in antiquity and served to repair broken ceramics, fix eyes and horns on statues (e.g. at Tell al-Ubaid around 2500 BC). Beautiful decorations with stones, shells, mother of pearl, on palm trees, cups, ostrich eggs, musical instruments (e.g. the Queen's lyre) and other items, such as rings, jewellery and games, have been excavated from the Royal tombs in Ur. They are on view in the British Museum. With a special enigmatic material, commonly referred to as 'bitumen mastic', the inhabitants of Susa sculpted masterpieces of art which are today exhibited in the Louvre Museum in Paris. This unique collection is presented in a book by Connan and Deschesne (1996). Last, bitumen was also considered as a powerful remedy in medical practice, especially as a disinfectant and insecticide, and was used by the ancient Egyptians to prepare mixtures to embalm the corpses of their dead. Modern analytical techniques, currently applied in the field of petroleum geochemistry, have been adapted to the study of numerous archaeological bituminous mixtures found in excavations. More than 700 bituminous samples have been analysed during the last decade, using gas chromatography alone and gas chromatography coupled with mass spectrometry and isotopic chemistry (carbon and hydrogen mainly). These powerful tools, focused on the detailed analysis of biomarkers in hydrocarbon fractions, were calibrated on various well-known natural sources of bitumen in Iraq, Syria, Iran, Bahrain and Kuwait. These reference studies have made it possible to establish the origins of bitumen from numerous archaeological sites and to document the bitumen trade routes in the Middle East and the Arabo-Persian Gulf. Using a well-documented case history, Tell el 'Oueili (5800 to 3500 BC) in South Mesopotamia, we will illustrate in this paper how these new molecular and isotopic tools can help us to recognize different sources of bitumen and to trace the ancient trade routes through time. These import routes were found to vary with major cultural and political changes in the area under study. A second example, referring to the prehistoric period, describes bitumen traces on flint implements, dated from Mousterian times. This discovery, from the Umm El Tlel excavations near El Kown in Syria, was reported in 1996 in Boëda et al. At that time, the origin of the bitumen had not been elucidated due to contamination problems. Last year, a ball of natural oil-stained sands, unearthed from the same archaeological layer, allowed us to determine the source of the bitumen used. This source is regional and located in the Jebel Bichri, nearly 40 km from the archaeological site. The last case history was selected to illustrate another aspect of the investigations carried out. Recent geochemical studies on more than 20 balms from Egyptian mummies from the Intermediate, Ptolemaic and Roman periods have revealed that these balms are composed of various mixtures of bitumen, conifer resins, grease and beeswax. Bitumen occurs with the other ingredients and the balms studied show a great variety of molecular compositions. Bitumen from the Dead Sea area is the most common source but some other sources (Hit in Iraq?) are also revealed by different molecular patterns. The absolute amount of bitumen in balms varies from almost zero to 30% per weight.

PREFACE: 6th International Conference on Aperiodic Crystals (APERIODIC'09)

NASA Astrophysics Data System (ADS)

Grimm, Uwe; McGrath, Rónán; Degtyareva, Olga; Sharma, Hem Raj

2010-04-01

Aperiodic Logo Aperiodic'09, the sixth International Conference on Aperiodic Crystals, took place in Liverpool 13-18 September 2009. It was the first major conference in this interdisciplinary research field held in the UK. The conference, which was organised under the auspices of the Commission on Aperiodic Crystals of the International Union of Crystallography (IUCr), followed on from Aperiodic'94 (Les Diablerets, Switzerland), Aperiodic'97 (Alpe d'Huez, France), Aperiodic'2000 (Nijmegen, The Netherlands), Aperiodic'03 (Belo Horizonte, Brazil) and Aperiodic'06 (Zao, Japan). The next conference in the series will take place in Australia in 2012. The Aperiodic conference series is itself the successor to a series of Conferences on Modulated Structures, Polytypes and Quasicrystals (MOSPOQ), which were held in Marseilles (France) in 1984, Wroclaw (Poland) in 1986, Varanasi (India) in 1988 and Balatonszeplak (Hungary) in 1991. The remit of the conference covers two broad areas of research on aperiodic crystals, incommensurately modulated and composite crystals on the one hand, and quasicrystals on the other hand, sharing the property that they are aperiodically ordered solids. In addition, the conference also featured recent research on complex metal alloys, which are in fact periodically ordered solids. However, the term complex refers to their large unit cells, which may contain thousands of atoms, and as a consequence complex metal alloys share some of the properties of quasicrystalline solids. Aperiodic'09 attracted about 110 participants from across the world, including 20 UK-based scientists (the second largest group after Japan who sent 21 delegates). A particular feature of the conference series is its interdisciplinary character, and once again the range of disciplines of participants included mathematics, physics, crystallography and materials science. The programme started with three tutorial lectures on Sunday afternoon, presenting introductory overviews on quasicrystals (Eiji Abe), complex metal alloys (Alessandra Beni) and incommensurately modulated structures (Gervais Chapuis). While these were mainly aimed at younger researchers in the field, the lectures were very well attended and appreciated by the participants. The main programme ran from Monday morning until Friday lunchtime. It comprised 13 invited and 40 contributed plenary talks, and more than 40 posters, which were presented at two afternoon/evening poster sessions. The topics covered in the programme range from mathematical foundations, mathematical models, new materials, sample preparation, structure determination, physical properties and surface properties to industrial applications. Every presenter was invited to submit an article for this proceedings volume, and the 36 peer-reviewed papers in this volume present a cross-section of the range of presentations at the conference. They have been arranged into four categories, (i) quasicrystals, (ii) modulated structures, (iii) mathematical and theoretical aspects of aperiodic order, and (iv) approximants and complex phases. Prizes for best student presentations were awarded to Heinrich Orsini-Rosenberg (ETH Zurich) for his poster Tailor-made sevenfold approximants: ab-initio investigations on formation and stability and to Holger Euchner (Universität Stuttgart) for his contributed talk on Lattice dynamics in complex metallic alloys - vibrational properties of Zn11Mg2. In addition to a cash prize, Heinrich Orsini-Rosenberg received an icosahedral teapot, which was manufactured and donated by David Warrington, and Holger Euchner received a book prize. The meeting started with a welcome reception in the University's recently refurbished Victoria Gallery and Museum. A public lecture Simple sets of shapes that tile the plane but cannot ever repeat by Professor Sir Roger Penrose FRS attracted a wide audience and gave a fascinating insight into the discovery of the Penrose tiling, which is still the paradigm of aperiodic order in two dimensions and used in modelling quasicrystalline materials, some ten years before quasicrystals were first seen in experiment. The conference excursion and dinner centred on the historic waterfront area of this 800-year old city that was designated European Capital of Culture in 2008. The enjoyment of the ferry trip on the Mersey and subsequent walk to the Albert dock museums was greatly enhanced by the fine weather, which lasted throughout the entire conference week. The guests of honour at the conference dinner were Professor Sir Roger Penrose FRS and Professor Alan L Mackay FRS, bringing together two distinguished UK scientists who made seminal contributions to the subject. Besides the scientific programme, the conference also offered a presentation by the author Ann Lingard, whose latest novel The Embalmer's Book of Recipes features a mathematician working on quasicrystals at the University of Liverpool as its main character. A related EPSRC-supported workshop on Mathematical Aspects of Aperiodic Order, organised by Alex Clark, John Hunton and Uwe Grimm, was held in Leicester in the week preceding the conference, and attracted about 40 participants. It is not possible to organise a conference without the help and support of a large number of people, and we would like to take this opportunity to acknowledge the support of everyone who was involved in organising and running this conference. We would like to thank the IUCr Aperiodic Commission, and in particular its chair Professor Marc de Boissieu, who not only entrusted us with hosting the event, but acted as the International Advisory Committee and provided valuable advice and guidance. We are indebted to the members of the International Programme Committee, who helped to put together an exciting programme by suggesting invited speakers and selecting presentations for contributed plenary talks. We are immensely grateful to all members of the National Organising Committee, who provided essential support during the organising stage and during the conference itself, and we would particularly like to thank the conference secretary, Mrs Angie Reid, for her excellent administrative support before, during and after the conference, and for her help in the production of this volume. We are very much indebted to out co-editors, Dr Olga Degtyareva (Edinburgh) and Dr Hem Raj Sharma (Liverpool), for their contributions to the editing of this volume. Finally, and most of all, we would like to thank all participants of the conference for coming to Liverpool, for contributing by presenting their recent work and taking part in discussions, and for creating such an enjoyable and fruitful collegiate atmosphere throughout the week. Last but not least we would like to express our gratitude for the generous financial support we received from the Open University, the University of Liverpool and the Institute of Physics (Mathematical and Theoretical Physics Group and Thin Films and Surfaces Group). The International Union of Crystallography provided financial sponsorship which was allocated to support the participation of 15 young scientists. The European Network of Excellence on Complex Metallic Alloys provided travel and subsistence support to members of participating organisations. Rónán McGrath Uwe Grimm Conference photograph