Multiscale Model Simulations of Temperature and Relative Humidity for the License Application of the Proposed Yucca Mountain Repository

NASA Astrophysics Data System (ADS)

Buscheck, T.; Glascoe, L.; Sun, Y.; Gansemer, J.; Lee, K.

2003-12-01

For the proposed Yucca Mountain geologic repository for high-level nuclear waste, the planned method of disposal involves the emplacement of cylindrical packages containing the waste inside horizontal tunnels, called emplacement drifts, bored several hundred meters below the ground surface. The emplacement drifts reside in highly fractured, partially saturated volcanic tuff. An important phenomenological consideration for the licensing of the proposed repository at Yucca Mountain is the generation of decay heat by the emplaced waste and the consequences of this decay heat. Changes in temperature will affect the hydrologic and chemical environment at Yucca Mountain. A thermohydrologic-modeling tool is necessary to support the performance assessment of the Engineered Barrier System (EBS) of the proposed repository. This modeling tool must simultaneously account for processes occurring at a scale of a few tens of centimeters around individual waste packages, for processes occurring around the emplacement drifts themselves, and for processes occurring at the multi-kilometer scale of the mountain. Additionally, many other features must be considered including non-isothermal, multiphase-flow in fractured porous rock of variable liquid-phase saturation and thermal radiation and convection in open cavities. The Multiscale Thermohydrologic Model (MSTHM) calculates the following thermohydrologic (TH) variables: temperature, relative humidity, liquid-phase saturation, evaporation rate, air-mass fraction, gas-phase pressure, capillary pressure, and liquid- and gas-phase fluxes. The TH variables are determined as a function of position along each of the emplacement drifts in the repository and as a function of waste-package (WP) type. These variables are determined at various generic locations within the emplacement drifts, including the waste package and drip-shield surfaces and in the invert; they are also determined at various generic locations in the adjoining host rock; these variables are determined every 20 m for each emplacement drift in the repository. The MSTHM accounts for 3-D drift-scale and mountain-scale heat flow and captures the influence of the key engineering-design variables and natural-system factors affecting TH conditions in the emplacement drifts and adjoining host rock. Presented is a synopsis of recent MSTHM calculations conducted to support the Total System Performance Assessment for the License Application (TSPA-LA). This work was performed under the auspices of the U.S. Department of Energy by University of California Lawrence Livermore National Laboratory under contract No. W-7405-Eng-48.

Identification of the Emplacement of Improvised Explosive Devices by Experienced Mission Payload Operators.

PubMed

McNeese, Nathan J; Cooke, Nancy J; Branaghan, Russell; Knobloch, Ashley; Taylor, Amanda

2017-04-01

Improvised Explosive Devices (IEDs) have become one of the deadliest threats to military personnel, resulting in over 50% of American combat casualties in Iraq and Afghanistan. Identification of IED emplacement is conducted by mission payload operators (MPOs). Yet, experienced MPOs are limited in number, making MPO training a critical intervention. In this article, we implement a Cognitive Engineering Based on Expert Skill methodology to better understand how experienced MPOs identify the emplacement of IEDs for the purposes of improving training. First, expert knowledge was elicited through interviews and questionnaires to identify the types of perceptual cues used and how these cues are cognitively processed. Results indicate that there are many different static and dynamic cues that interact with each other over time and space. Using data from the interviews and questionnaires, an empirically grounded framework is presented that explains the cognitive process of IED emplacement detection. Using the overall findings and the framework, IED emplacement training scenarios were developed and built into a simulation. Copyright © 2016 Elsevier Ltd. All rights reserved.

Mush!

NASA Astrophysics Data System (ADS)

Ashwal, L. D.

2012-12-01

Evidence for emplacement as crystal-laden mushes is abundant in mafic magma systems (i.e. products of broadly basaltic magmatism), including anorthosite complexes, layered mafic intrusions and a variety of sills and dikes. Some of the best examples involve the way feldspar becomes concentrated into anorthositic rocks. Proterozoic anorthosite massifs (e.g. Nain, Rogaland, Adirondacks), whose bulk compositions are characteristically hyperfeldspathic, are best interpreted as resulting from emplacement of plagioclase-rich mushes that ascended to shallow crustal emplacement sites from deep (~Moho) staging chambers in which ~An50 crystals floated due to density relations at high pressure. Supporting evidence includes large (up to ~1 m) grain size, compositional homogeneity of plagioclase with variable Mg# (caused by trapped liquid effects), and protoclastic textures. Isotopic disequilibrium between cumulus plagioclase and post-cumulus pyroxene result from progressive contamination with continental components. This is dramatically demonstrated at Nain (Labrador), where the anorthositic crystal mushes (~1.3 Ga) were emplaced into early Archean (~3.8 Ga) country rocks. High-Al, high-pressure orthopyroxene megacrysts are commonly dragged upward in feldspathic mushes to shallow emplacement sites, where they exsolved plagioclase lamellae (Bybee & Ashwal, this meeting). Archean calcic anorthosites (e.g. Fiskenaesset, W Greenland) and related sills, dikes and flows that contain homogeneous megacrysts up to 10s of cm across of ~An80 also must have formed by mush emplacement, although probably from shallower staging chambers in oceanic rather than continental crust. Many layered mafic intrusions (e.g. Bushveld, Stillwater, Dufek, Duluth) contain thick horizons of anorthosite in which plagioclase compositions are uniform, in some cases throughout >1000 m of stratigraphy. This is best interpreted as representing repeated emplacement of plagioclase-rich mushes from one or more deeper crystallizing magma chambers. In the Bushveld Complex, where deep drill cores have allowed near-continuous measurements of mineral compositions and geophysical properties, the results reveal a subtle cyclicity, invisible in outcrops, over scales of 50 - 100 m, commonly associated with broad reversals in mineral compositional trends. Each of these can be interpreted as a blending zone involving a new addition of crystal-laden magma. Much of Bushveld stratigraphy, and that of other layered intrusions contains plagioclase:pyroxene demonstrably higher than cotectic proportions, supporting overall construction by plagioclase-rich magmas. Isotopic disequilibrium effects, similar to those described above, have been detected in Bushveld cumulates, lending further support to mush emplacement models. Large layered intrusions were probably constructed by repeated emplacement of dozens of individual magmatic entities with variable crystal:melt ratios (Marsh, 2006, Elements). Even the properties of very small (~30 km2) layered intrusions like that at Doros, Namibia (Owen-Smith & Ashwal, this meeting) show abundant evidence for multiple mush emplacement. In plutonic magma bodies arising from mafic magmatism, therefore, the involvement of crystal mushes appears to be the rule rather than the exception.

Nested granites in question: Contrasted emplacement kinematics of independent magmas in the Zaër pluton, Morocco

NASA Astrophysics Data System (ADS)

Bouchez, Jean Luc; Diot, Herve

1990-10-01

The concentrically zoned Zaër pluton (Variscan Meseta of Morocco), previously modeled as the nesting of two magmas forming a ballooning pluton, is here subjected to a study of its internal magmatic and solid-state structures. The magmatic flow patterns, derived mainly from anisotropy of magnetic susceptibility measurements, together with structural observations down to thin-section scale, indicate that these two magmas have undergone totally independent kinematics of emplacement. This supports recent isotope geochemistry and geochronology data indicating independent origin of the magmas and diachronism of emplacement, respectively. Thus, we propose that a magma diapir, probably emplaced within a crustal fracture zone, cooled down to brittle conditions, before a likely flat-lying fracture was opened within the fracture zone and was filled with a new and compositionally different pulse of magma.

A Volume Flux Approach to Cryolava Dome Emplacement on Europa

NASA Technical Reports Server (NTRS)

Quick, Lynnae C.; Fagents, Sarah A.; Hurford, Terry A.; Prockter, Louise M.

2017-01-01

We previously modeled a subset of domes on Europa with morphologies consistent with emplacement by viscous extrusions of cryolava. These models assumed instantaneous emplacement of a fixed volume of fluid onto the surface, followed by relaxation to form domes. However, this approach only allowed for the investigation of late-stage eruptive processes far from the vent and provided little insight into how cryolavas arrived at the surface. Consideration of dome emplacement as cryolavas erupt at the surface is therefore pertinent. A volume flux approach, in which lava erupts from the vent at a constant rate, was successfully applied to the formation of steep-sided volcanic domes on Venus. These domes are believed to have formed in the same manner as candi-date cryolava domes on Europa. In order to gain a more complete understanding of the potential for the emplacement of Europa domes via extrusive volcanism, we have applied this new volume flux approach to the formation of putative cryovolcanic domes on Europa. Assuming as in that europan cryolavas are briny, aqueous solutions which may or may not contain some ice crystal fraction, we present the results of this modeling and explore theories for the formation of low-albedo moats that surround some domes.

16. Emplacement no. 1, door to small communication room (L), ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

16. Emplacement no. 1, door to small communication room (L), delivery table for projectile at right - Fort Wadsworth Battery Romeyn B. Ayers, South side of Ayers Road, Staten Island, Rosebank, Richmond County, NY

11. Battery Richmond, emplacement no. 1, showing (LR): sealed location ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. Battery Richmond, emplacement no. 1, showing (L-R): sealed location of delivery table for projectile hoist, recess for powder hoist - Forth Wadsworth Battery Richmond, Fort Wadsworth, Staten Island, New York County, NY

Thermochronology of the Cornubian batholith in southwest England: Implications for pluton emplacement and protracted hydrothermal mineralization

NASA Astrophysics Data System (ADS)

Chesley, J. T.; Halliday, A. N.; Snee, L. W.; Mezger, K.; Shepherd, T. J.; Scrivener, R. C.

1993-04-01

The metalliferous ore deposits of southwest England are associated with biotite-muscovite granites that intruded upper Paleozoic sediments and volcanic rocks at the end of the Hercynian Orogeny. The hydrothermal mineralization can be subdivided into four stages: (1) exoskarns (2) high-temperature tin and tungsten oxide-bearing sheeted greisen bordered veins and Sn-bearing tourmaline veins and breccias (3) polymetallic quartz-tourmaline-chlorite-sulfide-fluorite-bearing fissure veins, which represent the main episode of economic mineralization (4) late-stage, low-temperature polymetallic fluorite veins. U-Pb dating of monazite and xenotime and 40Ar /39Ar dating of muscovite were used to determine emplacement ages and cooling times for individual plutons within the Cornubian batholith, as well as separate intrusive phases within the plutons. In addition, 40Ar /39Ar ages from hornblende and secondary muscovite and Sm-Nd isochron ages from fluorite were employed to determine the relationship between pluton emplacement and different stages of mineralization. The U-Pb ages indicate that granite magmatism was protracted from ~300 Ma down to ~275 Ma with no evidence of a major hiatus. There is no systematic relation between the age of a pluton and its location within the batholith. The U-Pb ages for separate granite phases within a single pluton are resolvable and indicate that magma emplacement within individual plutons occurred over periods of as much as 4.5 myrs. Felsic porphyry dike emplacement was coeval with plutonism, but continued to ~270 Ma. The geochronologic data suggest that the Cornubian batholith originated from repeated melting events over 30 myrs and was formed by a series of small coalescing granitic bodies. Cooling rates of the main plutons are unrelated to emplacement age, but decrease from the southwest to the northeast from ~210°C myr -1 to ~60°C myr -1 with a mean of 100°C myr -1. These slow cooling rates appear to reflect the addition of heat from multiple intrusive episodes. The mineralization history is distinct for each pluton and ranges from coeval with, to up to 40 myrs younger than the cooling age for the host pluton. Stage 2 mineralization is broadly synchronous with the emplacement of granite magmas, is dominated by fluids expelled during crystallization, and may be repeated by the emplacement of younger magmas within the same pluton. Sm-Nd isochrons for fluorite from stage 3 polymetallic mineralization give ages of 259 ± 7, 266 ± 3 and 267 ± 12 Ma, postdating stage 2 mineralization by up to 25 myrs within the same deposit. The similarity in age of the main polymetallic mineralization hosted by the oldest and youngest plutons, suggests that this stage of mineralization is unlikely to be related to hydrothermal circulation driven by the emplacement and cooling of the host granite. The mineralization is more likely the product of regional hydrothermal circulation driven by heat from the emplacement and crystallization of younger buried pulses of magma.

Thermochronology of the Cornubian batholith in southwest England: Implications for pluton emplacement and protracted hydrothermal mineralization

USGS Publications Warehouse

Chesley, J.T.; Halliday, A.N.; Snee, L.W.; Mezger, K.; Shepherd, T.J.; Scrivener, R.C.

1993-01-01

The metalliferous ore deposits of southwest England are associated with biotite-muscovite granites that intruded upper Paleozoic sediments and volcanic rocks at the end of the Hercynian Orogeny. The hydrothermal mineralization can be subdivided into four stages: 1. (1) exoskarns 2. (2) high-temperature tin and tungsten oxide-bearing sheeted greisen bordered veins and Sn-bearing tourmaline veins and breccias 3. (3) polymetallic quartz-tourmaline-chlorite-sulfide-fluorite-bearing fissure veins, which represent the main episode of economic mineralization 4. (4) late-stage, low-temperature polymetallic fluorite veins. U-Pb dating of monazite and xenotime and 40Ar 39Ar dating of muscovite were used to determine emplacement ages and cooling times for individual plutons within the Cornubian batholith, as well as separate intrusive phases within the plutons. In addition, 40Ar 39Ar ages from hornblende and secondary muscovite and Sm-Nd isochron ages from fluorite were employed to determine the relationship between pluton emplacement and different stages of mineralization. The U-Pb ages indicate that granite magmatism was protracted from ~300 Ma down to ~275 Ma with no evidence of a major hiatus. There is no systematic relation between the age of a pluton and its location within the batholith. The U-Pb ages for separate granite phases within a single pluton are resolvable and indicate that magma emplacement within individual plutons occurred over periods of as much as 4.5 myrs. Felsic porphyry dike emplacement was coeval with plutonism, but continued to ~270 Ma. The geochronologic data suggest that the Cornubian batholith originated from repeated melting events over 30 myrs and was formed by a series of small coalescing granitic bodies. Cooling rates of the main plutons are unrelated to emplacement age, but decrease from the southwest to the northeast from ~210??C myr-1 to ~60??C myr-1 with a mean of 100??C myr-1. These slow cooling rates appear to reflect the addition of heat from multiple intrusive episodes. The mineralization history is distinct for each pluton and ranges from coeval with, to up to 40 myrs younger than the cooling age for the host pluton. Stage 2 mineralization is broadly synchronous with the emplacement of granite magmas, is dominated by fluids expelled during crystallization, and may be repeated by the emplacement of younger magmas within the same pluton. Sm-Nd isochrons for fluorite from stage 3 polymetallic mineralization give ages of 259 ?? 7, 266 ?? 3 and 267 ?? 12 Ma, postdating stage 2 mineralization by up to 25 myrs within the same deposit. The similarity in age of the main polymetallic mineralization hosted by the oldest and youngest plutons, suggests that this stage of mineralization is unlikely to be related to hydrothermal circulation driven by the emplacement and cooling of the host granite. The mineralization is more likely the product of regional hydrothermal circulation driven by heat from the emplacement and crystallization of younger buried pulses of magma. ?? 1993.

Extremely High Magma Emplacement Rates Recorded in the Golden Horn Batholith, WA

NASA Astrophysics Data System (ADS)

Eddy, M. P.; Bowring, S. A.; Tepper, J. H.; Miller, R. B.

2015-12-01

High SiO2 rhyolites emplaced during 'super-eruptions' demonstrate that large volumes of eruptible magma can exist in the upper crust. However, the timescale over which the magma reservoirs that source these eruptions are built remains controversial. Thermal models suggest that magma emplacement rates need to be > 0.005-0.01 km3/yr in order to accumulate enough eruptible magma to source a 'super-eruption'. Yet, these rates are higher than the time-averaged rates (< 0.001 km3/yr) for nearly all well-studied granitoid plutonic complexes. This disparity contradicts geologic evidence suggesting that the high SiO2 rhyolites emplaced during 'super-eruptions' are extracted from crystal rich magma chambers that should be preserved in the geologic record as granodioritic and granitic plutons. We quantify time-averaged magma emplacement rates for the upper crustal Golden Horn batholith, WA based on new geologic mapping and U-Pb zircon CA-IDTIMS geochronology. The batholith is exposed over 310 km3 and can be separated in the field into five intrusive units. High topography allows the 3D geometry of each phase to be constrained and their volumes range from < 100 km3 to > 400 km3. U-Pb zircon geochronology reveals that four of the five phases were assembled incrementally and distinct zircon populations from samples within these phases suggest that individual magmatic pulses had fully crystallized before the next arrived. However, six nearly identical U-Pb zircon dates from a > 400 km3 rapakivi granite show that this phase was built in ca. 50 kyr and that large portions may have been emplaced nearly simultaneously. The implied emplacement rate for this phase (≥ 0.008 km3/yr) is in agreement with those predicted for assembly of the upper crustal magma chambers that source 'super-eruptions', and it may provide a rare and unprecedented opportunity to study the processes that occur in such chambers.

Eruption and emplacement dynamics of a thick trachytic lava flow of the Sancy volcano (France)

NASA Astrophysics Data System (ADS)

Latutrie, Benjamin; Harris, Andrew; Médard, Etienne; Gurioli, Lucia

2017-01-01

A 70-m-thick, 2200-m-long (51 × 106 m3) trachytic lava flow unit underlies the Puy de Cliergue (Mt. Dore, France). Excellent exposure along a 400-m-long and 60- to 85-m-high section allows the flow interior to be accessed on two sides of a glacial valley that cuts through the unit. We completed an integrated morphological, structural, textural, and chemical analysis of the unit to gain insights into eruption and flow processes during emplacement of this thick silicic lava flow, so as to elucidate the chamber and flow dynamic processed that operate during the emplacement of such systems. The unit is characterized by an inverse chemical stratification, where there is primitive lava beneath the evolved lava. The interior is plug dominated with a thin basal shear zone overlying a thick basal breccia, with ramping affecting the entire flow thickness. To understand these characteristics, we propose an eruption model that first involves processes operating in the magma chamber whereby a primitive melt is injected into an evolved magma to create a mixed zone at the chamber base. The eruption triggered by this event first emplaced a trachytic dome, into which banded lava from the chamber base was injected. Subsequent endogenous dome growth led to flow down the shallow slope to the east on which the highly viscous (1012 Pa s) coulée was emplaced. The flow likely moved extremely slowly, being emplaced over a period of 4-10 years in a glacial manner, where a thick (>60-m) plug slid over a thin (5-m-thick) basal shear zone. Excellent exposure means that the Puy de Cliergue complex can be viewed as a case type location for understanding and defining the eruption and emplacement of thick, high-viscosity, silicic lava flow systems.

Rapid Intradeformational Emplacement of the Big Hole Canyon Pluton Into the Sevier Fold-Thrust Belt, Southwest Montana.

NASA Astrophysics Data System (ADS)

Hespenheide, M. A.

2002-12-01

The Big Hole Canyon pluton (BHCp) is a Late Cretaceous pluton emplaced within the Sevier fold-and-thrust belt of the western North American Cordillera. The pluton is exposed over 60km2 and a thickness of ~1400m. Combined anisotropy of magnetic susceptibility (AMS), structural, and field studies document a clear pattern of magmatic flow radiating from at least three subvertical conduits <100m wide and ~300 to ~800m long. Interpreted flow plunges change rapidly to subhorizontal fabrics across the rest of the pluton, matching the expected pattern for laccolithic emplacement. Ascent conduits within the Big Hole Canyon pluton are coincident with the fold axis of an anticline above a thrust ramp, suggesting that the magma ascended up the fault of the fault-bend-fold. Geobarometry and stratigraphic reconstructions indicate an emplacement depth of approximately ~3km. Preliminary thermal modeling indicates that the BHCp was emplaced in 250,000 years, likely between periods of regional shortening deformation. Rapid magma ascent rates calculated by dike flow modeling and implied by entrained wall-rock xenoliths may indicate sequential magma injection into the pluton; an absence of chill margins between phases within the pluton indicates that sequential injections must have taken place quickly enough that the magmas did not have time to cool below the solidus temperature. The geometry and location of the BHCp suggest that magma used a pre-existing fault as a mechanical discontinuity for both ascent and emplacement. Continued intrusion of magma had a sufficient amount of driving pressure to stretch, shear, and lift the roof of the pluton. Detailed field mapping, structural studies, AMS, and thermobarometry indicate that the Late Cretaceous Big Hole Canyon pluton was emplaced as a laccolith at the top of a pre-existing fault-bend-fold in the frontal portion of the Sevier fold-thrust belt.

Exploring Inflated Pahohoe Lava Flow Morphologies and the Effects of Cooling Using a New Simulation Approach

NASA Technical Reports Server (NTRS)

Glaze, L. S.; Baloga, S. M.

2014-01-01

Pahoehoe lavas are recognized as an important landform on Earth, Mars and Io. Observations of such flows on Earth (e.g., Figure 1) indicate that the emplacement process is dominated by random effects. Existing models for lobate a`a lava flows that assume viscous fluid flow on an inclined plane are not appropriate for dealing with the numerous random factors present in pahoehoe emplacement. Thus, interpretation of emplacement conditions for pahoehoe lava flows on Mars requires fundamentally different models. A new model that implements a simulation approach has recently been developed that allows exploration of a variety of key influences on pahoehoe lobe emplacement (e.g., source shape, confinement, slope). One important factor that has an impact on the final topographic shape and morphology of a pahoehoe lobe is the volumetric flow rate of lava, where cooling of lava on the lobe surface influences the likelihood of subsequent breakouts.

Pluton emplacement in a releasing bend in a transpressive regime: the arrozal granite in the Paraíba do Sul shear belt, Rio de Janeiro.

PubMed

Nummer, Alexis R; Machado, Rômulo; Dehler, Nolan M

2007-06-01

The Arrozal Granite, situated in the southwestern region of the State of Rio de Janeiro, has a granitic to granodioritic composition. It contains a strong mylonitic foliation along its border, passing gradually to a well-developed magmatic foliation towards its center. Structural analysis indicates that the Arrozal Granite was emplaced along the Além-Paraíba Shear Zone in a dextral transpressive tectonic regime. A regional shift of the trend along this shear zone from NE-SW to E-W, observed in the area, is interpreted to be casually related to the creation of space for the emplacement of the granite. Our data indicate that releasing bends may have played an important role for space generation during the emplacement of the Arrozal Granite and other plutons.

Waste Handling and Emplacement Options for Disposal of Radioactive Waste in Deep Boreholes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cochran, John R.; Hardin, Ernest

2015-11-01

Traditional methods cannot be used to handle and emplace radioactive wastes in boreholes up to 16,400 feet (5 km) deep for disposal. This paper describes three systems that can be used for handling and emplacing waste packages in deep borehole: (1) a 2011 reference design that is based on a previous study by Woodward–Clyde in 1983 in which waste packages are assembled into “strings” and lowered using drill pipe; (2) an updated version of the 2011 reference design; and (3) a new concept in which individual waste packages would be lowered to depth using a wireline. Emplacement on coiled tubingmore » was also considered, but not developed in detail. The systems described here are currently designed for U.S. Department of Energy-owned high-level waste (HLW) including the Cesium- 137/Strontium-90 capsules from the Hanford Facility and bulk granular HLW from fuel processing in Idaho.« less

Regional stratigraphy and geologic history of Mare Crisium

NASA Technical Reports Server (NTRS)

Head, J. W., III; Adams, J. B.; Mccord, T. B.; Pieters, C.; Zisk, S.

1978-01-01

Remote sensing and Luna 24 sample data are used to develop a summary of the regional stratigraphy and geologic history of Mare Crisium. Laboratory spectra of Luna 24 samples, telescopic reflectance spectra in the 0.3 to 1.1 micron range and orbital X-ray data have identified three major basalt groups in the region. Group I soil is derived from iron- and magnesium-rich titaniferous basalts and was apparently emplaced over the majority of the basin, however is presently exposed as a shelf in the southwest part. Group II soils, derived from very low titanium ferrobasalts, were emplaced in two stages subsequent to Group I emplacement and now appear as part of the outer shelf and topographic annulus. Subsidence of the basin interior preceded and continued after the emplacement of the third basalt group, a soil derived from a low titanium ferrobasalt. The Luna 24 site is found to be within a patch of Group II material.

Igneous sills record far-field and near-field stress interactions during volcano construction: Isle of Mull, Scotland

NASA Astrophysics Data System (ADS)

Stephens, T. L.; Walker, R. J.; Healy, D.; Bubeck, A.; England, R. W.; McCaffrey, K. J. W.

2017-11-01

Sill emplacement is typically associated with horizontally mechanically layered host rocks in a near-hydrostatic far-field stress state, where contrasting mechanical properties across the layers promote transitions from dykes, or inclined sheets, to sills. We used detailed field observations from the Loch Scridain Sill Complex (Isle of Mull, UK), and mechanical models to show that layering is not always the dominant control on sill emplacement. The studied sills have consistently shallow dips (1°-25°) and cut vertically bedded and foliated metamorphic basement rocks, and horizontally bedded cover sedimentary rocks and lavas. Horizontal and shallowly-dipping fractures in the host rock were intruded with vertical opening in all cases, whilst steeply-dipping discontinuities within the sequence (i.e. vertical fractures and foliation in the basement, and vertical polygonal joints in the lavas) were not intruded during sill emplacement. Mechanical models of slip tendency, dilation tendency, and fracture susceptibility for local and overall sill geometry data, support a radial horizontal compression during sill emplacement. Our models show that dykes and sills across Mull were emplaced during NW-SE horizontal shortening, related to a far-field tectonic stress state. The dykes generally accommodated phases of NE-SW horizontal tectonic extension, whereas the sills record the superposition of the far-field stress with a near-field stress state, imposed by emplacement of the Mull Central Volcano. We show that through detailed geometric characterisation coupled with mechanical modelling, sills may be used as an indication of fluctuations in the paleostress state.

Palaeomagnetic Emplacement Temperature Determinations of Pyroclastic and Volcaniclastic Deposits in Southern African Kimberlite Pipes

NASA Astrophysics Data System (ADS)

Fontana, G.; Mac Niocaill, C.; Brown, R.; Sparks, R. S.; Matthew, F.; Gernon, T. M.

2009-12-01

Kimberlites are complex, ultramafic and diamond-bearing volcanic rocks preserved in volcanic pipes, dykes and craters. The formation of kimberlite pipes is a strongly debated issue and two principal theories have been proposed to explain pipe formation: (1) the explosive degassing of magma, and (2) the interaction of rising magma with groundwater (phreatomagmatism). Progressive thermal demagnetization studies are a powerful tool for determining the emplacement temperatures of ancient volcanic deposits and we present the first application of such techniques to kimberlite deposits. Lithic clasts were sampled from a variety of lithofacies, from three pipes for which the internal geology is well constrained (A/K1 pipe, Orapa Mine, Botswana and the K1 and K2 pipes, Venetia Mine, South Africa). The sampled deposits included massive and layered vent-filling breccias with varying abundances of lithic inclusions and layered crater-filling pyroclastic deposits, talus breccias and volcaniclastic breccias. Lithic clasts sampled from layered and massive vent-filling pyroclastic deposits in A/K1 were emplaced at >590° C. Results from K1 and K2 provide a maximum emplacement temperature limit for vent-filling breccias of 420-460° C; and constrain equilibrium deposit temperatures at 300-340° C. Crater-filling volcaniclastic kimberlite breccias and talus deposits from A/K1 were emplaced at ambient temperatures, consistent with infilling of the pipe by post-eruption epiclastic processes. Identified within the epiclastic crater-fill succession is a laterally extensive 15-20 metre thick kimberlite pyroclastic flow deposit emplaced at temperatures of 220-440° C. It overlies the post-eruption epiclastic units and is considered an extraneous pyroclastic kimberlite deposit erupted from another kimberlite vent. The results provide important constraints on kimberlite emplacement mechanisms and eruption dynamics. Emplacement temperatures of >590°C for pipe-filling pyroclastic deposits are consistent with volatile-driven eruptions, and suggest phreatomagmatism did not play a major role in the generation of the deposits. The discovery of an extraneous pyroclastic flow deposit within the Orapa A/K1 epiclastic crater, which was erupted from another vent, suggests kimberlite eruptions are capable of producing sustained eruption columns and thick pyroclastic deposits involving significant transport away from source.

The emplacement, geochemistry and petrogenesis of two central Morocco Hercynian granites. Geotectonic implications

NASA Astrophysics Data System (ADS)

Giuliani, G.; Cheilletz, A.; Zimmermann, J. L.

New field, petrographic and geochemical data including REE, Rb-Sr, and K-Ar, are presented concerning the emplacement and petrogenesis of two calc-alkaline Moroccan Hercynian granites: the Zaër pluton and the Djebel Aouam stocks. Zonation in the Zaër pluton does not appear to result from simple fractional crystallization nor from hydrothermal alteration but is rather the diapiric intrusion of two interlocked bodies. REE geochemistry supports the interpretation that the biotite-granodiorite magma (301 ± 8.2 M.a.) and the Djebel Aouam stocks appear to have been derived by fusion of crustal materials with possible mantle contamination ( Initial87Sr/ 86Srratio = 0.70514 ). The second two-mica granitic magma (283.4 ± 6.2 M.a.) corresponds to a peraluminous granite (1.22 < A/ CNK < 1.33) generated by fusion of continental crust including mature sedimentarr materials (Initial 87Sr/ 86Sr ratio = 0.70836). These granites are compared to the Acadian granites of north Appalachian and classified in the «post-collision, uplift environmentå type. An illustrative four step model presenting the generation and emplacement of these two granites together with the associated W-Sn-Pb-Zn-Ag mineralizations is proposed: (1) first magma generation, (2) first melt emplacement, (3) second melt emplacement, (4) late convective flow.

CONSTRUCTION PROGRESS PHOTO SHOWING EMPLACEMENT STEEL BEAMS FUEL STORAGE BUILDING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

CONSTRUCTION PROGRESS PHOTO SHOWING EMPLACEMENT STEEL BEAMS FUEL STORAGE BUILDING (CPP-603) LOOKING EAST. INL PHOTO NUMBER NRTS-51-1371. Unknown Photographer, 1/31/1951 - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

Relating Seismicity to Dike Emplacement, and the Conundrum of Dyke-Parallel Faulting

NASA Astrophysics Data System (ADS)

Dering, G.; Micklethwaite, S.; Cruden, A. R.; Barnes, S. J.; Fiorentini, M. L.

2016-12-01

Seismic monitoring shows that faulting and fracturing precede and accompany magma emplacement on timescales of hours and days. One outstanding problem is that the precision of earthquake hypocentre locations is typically limited to tens or hundreds of meters and cannot resolve whether the hypocentres relate to strain of wall rock fragments within the dikes, in a process zone around the intrusion or peripherally in the country rock. We examine a swarm of 19 dolerite dikes, near Albany, Western Australia using an unmanned aerial vehicle and Structure-from-Motion photogrammetry to obtain accurate, high resolution 3D reconstructions of outcrop and to digitally extract structural data. We find rare overprinting relationships indicate dike emplacement and faulting was coeval and that the number of faults/fractures increase into the dike swarm (2.2 ± 0.7 more fractures, per unit length in host rocks intruded by dikes relative to the background value). The faults are cataclasite-bearing and parallel to the dikes but intriguingly dike emplacement appears to have been accommodated by mode 1 extension. We further provide the first evidence that dike-parallel shear failure occurs in a damage zone associated with the dike swarm. These results support seismological observations of dike-parallel shear failure associated with some intrusion events, which contradict Mohr-Coulomb theory and numerical modelling of dike propagation in brittle-elastic rock, where shear failure is predicted to occur on faults oriented approximately 30° to the dyke plane. We suggest the dike swarm occupies a network of joints and fractures formed prior to swarm emplacement but then reactivated ahead of propagating dikes and remaining active during the early stages of emplacement.

Thermal Anomaly Engendered by the Emplacement of AN Au-DEPOSIT: Example from the Franciscan Complex

NASA Astrophysics Data System (ADS)

Lahfid, A.; Lacroix, B.; Delchini, S.; Hughes, J.

2016-12-01

The thermal history of the Lucia subterrane located within the Franciscan Complex (California, USA) has been previously proposed by Underwood et al. (1995). Based on both vitrinite reflectance (Rm) and illite cristallinity methods, these authors suggest that the Lucia subterrane is locally perturbed by a thermal anomaly (up to 300ºC), probably caused by the emplacement of an Au-deposit: the Los Burros Gold deposit. Although both the thermal anomaly and the deposit seem spatially correlated, their relationship is still poorly constrained. In order to better explain the anomalous temperatures recorded in the vicinity of the deposit and their possible link with mineralization processes, we first performed detailed geological and structural mapping within the Los Burros district coupled to a thermal study. The peak temperature reached by metasediments from the Lucia subterrane have been regionally investigated using Raman Spectroscopy of Carbonaceous Materials (RSCM) method. In addition, through a careful fluid-inclusion study of the deposit, the potential source and the temperature of the fluid responsible for the Los Burros Au-deposit emplacement are currently being investigated. Our preliminary results confirm the previous temperatures and the presence of the thermal anomaly in the range 260-320ºC as inferred by Underwood et al (1995). In addition, our structural interpretation shows that the Los Burros deposit was emplaced during a late tectonic event marked by local reorientation of the regional tectonic features and the emplacement of meter-wide, quartz-calcite-sulfide extension veins. The temperatures determined by both methods (RSCM thermometry and fluid inclusion microthermometry) are consistent and support that the thermal anomaly is likely generated by the emplacement of the Los Burros Au-deposit during a local tectonic event.

Magnetic fabric in granitoid plutons emplaced during Variscan orogeny and timing of their intrusions: Eastern Variscan front

NASA Astrophysics Data System (ADS)

Hrouda, F.; Schulmann, K.; Chlupacova, M.; Aichler, J.; Mixa, P.; Pecina, V.; Zacek, V.; Kroener, A.

2003-04-01

The eastern Variscan front at the Czech and Polish border is characterised by oblique underthrusting of Neo-Proterozoic continental margin below thickened crustal root. The underthrust plate is subsequently imbricated and forms obliquely convergent crustal wedge which was further thrust over the foreland. Several granitic plutons of arc geochemical affinity are intruded during different stages of crustal thickening and exhumation. Analysis of anisotropy of magnetic susceptibility was carried out to study the relationships between host rock deformation and magma emplacement fabrics in different crustal levels and geographical positions with respect to crustal wedge and westerly orogenic root. Deep seated granodiorite sheets (Javornik intrusion 348 Ma, and Stare Mesto sill 340 Ma) are emplaced in the deepest and more internal high grade parts of the orogen along the margin of thickened crustal root. They show AMS fabrics entirely concordant with surrounding high grade gneisses and were emplaced during contractional (transpressive) regime.The Sumperk granodiorite is a more shallow intrusion emplaced in the central part of the crustal wedge. This sheet-like intrusion shows its AMS fabrics conformable to transpressional fabrics of surrounding mylonitised barovian schists and gneisses. The Zulova Pluton 330 Ma, representing the shallowest intrusion, intrudes the most external part of the crustal wedge. It shows the magnetic fabrics virtually perpendicular to compressional structures in the neighbouring areas. In addition, these fabrics are clearly concordant with large-scale detachment zone along which the Devonian meta-sedimentary cover slided to the west. The AMS fabrics of granitoids thus testify the progressive oblique convergence prograding to the east followed by collapse of external part of orogenic wedge. The AMS fabric data allow us to evaluate the mechanical role of arc magmas syntectonically emplaced during oblique convergence and finally during normal shearing perpendicular to the orogen.

Paleomagnetic Investigations on the Tectonic Evolution of the Southeastern Anatolian Ophiolites in Late Cretaceous

NASA Astrophysics Data System (ADS)

Cengiz Cinku, M.; Karabulut, S.; Parlak, O.; Cabuk, B. S.; Ustaömer, T.; Hisarli, M. Z.

2016-12-01

Two E-W trending ophiolite belts crop out in SE Turkey, The southerly located ophiolites (Hatay, Koçali) were emplaced onto the Arabian Platform in Late Cretaceous whereas the northerly located ophiolites (Göksun, İspendere, Kömürhan, Guleman) were underthrust the S Tauride margin (i.e. Malatya-Keban Platform) in Late Cretaceous. Here we report our first paleomagnetic results from 155 different sites which was was focused on to the sheeted dyke complex, cumulate gabbros and extrusive sequences of each ophiolite from the N and S belts, while the cover units where sampled to distinguish emplacement related tectonic rotations from post-emplacement tectonic rotations. Rock magnetic experiments showed evidence of magnetite/titanomagnetite as the main magnetic carriers at the majority of sites. Progressive thermal and alternating demagnetization revealed that the characteristic remanent component is removed between 500 and 580 °C or 30-100 mT, respectively. Our new paleomagnetic results from the ophiolitic rocks emplaced in Arabian platform and the SE Anatolia show important implications to the spreading centre of the former ocean (s). Large counterclockwise rotations up to 100° are obtained from the sheeded dykes of the Hatay ophiolite in the Arabian plate with a paleolatitude of 16°, in contrast to the sheeded dykes of the Göksun ophiolite emplaced in the SE Anatolian with clockwise rotation of 90° and a paleolatitude of 22°. The relative movement of the ophiolitic series show their emplacement in the different zones. This study was financially supported by the project of the Scientific and Technical Research Council of Turkey (TUBITAK) with Project number 114R024.

CONSTRUCTION PROGRESS PHOTO REMOTE ANALYTICAL FACILITY (CPP627) SHOWING EMPLACEMENT OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

CONSTRUCTION PROGRESS PHOTO REMOTE ANALYTICAL FACILITY (CPP-627) SHOWING EMPLACEMENT OF ROOF SLABS. INL PHOTO NUMBER NRTS-54-13463. R.G. Larsen, Photographer, 12/20/1954 - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

Multisensory Emplaced Learning: Resituating Situated Learning in a Moving World

ERIC Educational Resources Information Center

Fors, Vaike; Backstrom, Asa; Pink, Sarah

2013-01-01

This article outlines the implications of a theory of "sensory-emplaced learning" for understanding the interrelationships between the embodied and environmental in learning processes. Understanding learning as multisensory and contingent within everyday place-events, this framework analytically describes how people establish themselves as…

Multisensory Emplaced Learning: Resituating Situated Learning in a Moving World

ERIC Educational Resources Information Center

Fors, Vaike; Backstrom, Asa; Pink, Sarah

2013-01-01

This article outlines the implications of a theory of "sensory-emplaced learning" for understanding the interrelationships between the embodied and environmental in learning processes. Understanding learning as multisensory and contingent within everyday place-events, this framework analytically describes how people establish themselves…

Thermal-Hydrology Simulations of Disposal of High-Level Radioactive Waste in a Single Deep Borehole

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hadgu, Teklu; Stein, Emily; Hardin, Ernest

2015-11-01

Simulations of thermal-hydrology were carried out for the emplacement of spent nuclear fuel canisters and cesium and strontium capsules using the PFLOTRAN simulator. For the cesium and strontium capsules the analysis looked at disposal options such as different disposal configurations and surface aging of waste to reduce thermal effects. The simulations studied temperature and fluid flux in the vicinity of the borehole. Simulation results include temperature and vertical flux profiles around the borehole at selected depths. Of particular importance are peak temperature increases, and fluxes at the top of the disposal zone. Simulations of cesium and strontium capsule disposal predictmore » that surface aging and/or emplacement of the waste at the top of the disposal zone reduces thermal effects and vertical fluid fluxes. Smaller waste canisters emplaced over a longer disposal zone create the smallest thermal effect and vertical fluid fluxes no matter the age of the waste or depth of emplacement.« less

New SW Pacific tectonic model: Cyclical intraoceanic magmatic arc construction and near-coeval emplacement along the Australia-Pacific margin in the Cenozoic

NASA Astrophysics Data System (ADS)

Whattam, Scott A.; Malpas, John; Ali, Jason R.; Smith, Ian E. M.

2008-03-01

Various reconstructions of the SW Pacific for the Late Cretaceous and Cenozoic suggest that northeast dipping subduction began in the South Loyalty Basin (SLB) at 55-50 Ma and that subsequent closure of the SLB resulted in the diachronous emplacement of Cretaceous-Paleocene ophiolitic nappes onto the Norfolk Ridge in New Caledonia at 40-34 Ma and in Northland, New Zealand, around 24-21 Ma. A fundamental problem with these models is that they do not account for the fact that NE dipping subduction had already been established offshore Papua New Guinea by at least 65-60 Ma which resulted in the emplacement of the Papuan Ultramafic Belt (PUB) ophiolite at 59-58 Ma. A second issue is that the reconstructions are based largely upon unfounded assumptions as to the age and nature of the basement beneath the Loyalty arc and Three Kings Ridge. Finally, reconstructions of the Northland region are based upon the erroneous assumption that the age of the majority of the igneous component comprising the Northland allochthon is Late Cretaceous-Paleocene, when in fact it is Oligocene. A new model is presented whereby the PUB, New Caledonia, and Northland ophiolites formed and were emplaced in a cyclical fashion above an extensive NE dipping Cenozoic intraoceanic arc system which diachronously propagated (N-S) along the entire eastern margin of the Australian Plate. These "infant arc" ophiolites represent fragments of suprasubduction zone lithosphere (SSZL) generated in the earliest stages of magmatic arc formation that were emplaced shortly after (<20 m.y.) as a result of forearc-Australian Plate collision. Subduction inception was the result of subsidence of older MORB-like lithosphere generated within an extensive "back arc basin" to the east of the Norfolk Ridge during the earliest stages of SLB formation above a southwest dipping Pacific Plate. During emplacement of each ophiolite, a crustal fragment of the older lithosphere was scraped off the NE dipping slab and subsequently back-thrust beneath each ophiolite during its emplacement.

13. Emplacement no. 2, overhead view of counterweight well, showing ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. Emplacement no. 2, overhead view of counterweight well, showing channel for gun motor cable and bolt plates upon which base ring of gun carriage was mounted - Fort Wadsworth Battery Romeyn B. Ayers, South side of Ayers Road, Staten Island, Rosebank, Richmond County, NY

10 CFR 60.113 - Performance of particular barriers after permanent closure.

Code of Federal Regulations, 2014 CFR

2014-01-01

... complete filling with groundwater of available void spaces in the underground facility shall be...) Geologic setting. The geologic repository shall be located so that pre-waste-emplacement groundwater travel... release rate, designed containment period or pre-waste-emplacement groundwater travel time, provided that...

10 CFR 60.113 - Performance of particular barriers after permanent closure.

Code of Federal Regulations, 2012 CFR

2012-01-01

... complete filling with groundwater of available void spaces in the underground facility shall be...) Geologic setting. The geologic repository shall be located so that pre-waste-emplacement groundwater travel... release rate, designed containment period or pre-waste-emplacement groundwater travel time, provided that...

10 CFR 60.113 - Performance of particular barriers after permanent closure.

Code of Federal Regulations, 2013 CFR

2013-01-01

... complete filling with groundwater of available void spaces in the underground facility shall be...) Geologic setting. The geologic repository shall be located so that pre-waste-emplacement groundwater travel... release rate, designed containment period or pre-waste-emplacement groundwater travel time, provided that...

40 CFR 194.24 - Waste characterization.

Code of Federal Regulations, 2012 CFR

2012-07-01

... system. (e) Waste may be emplaced in the disposal system only if the emplaced components of such waste... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Waste characterization. 194.24 Section... PROGRAMS CRITERIA FOR THE CERTIFICATION AND RE-CERTIFICATION OF THE WASTE ISOLATION PILOT PLANT'S...

40 CFR 194.24 - Waste characterization.

Code of Federal Regulations, 2013 CFR

2013-07-01

... system. (e) Waste may be emplaced in the disposal system only if the emplaced components of such waste... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Waste characterization. 194.24 Section... PROGRAMS CRITERIA FOR THE CERTIFICATION AND RE-CERTIFICATION OF THE WASTE ISOLATION PILOT PLANT'S...

40 CFR 194.24 - Waste characterization.

Code of Federal Regulations, 2011 CFR

2011-07-01

... system. (e) Waste may be emplaced in the disposal system only if the emplaced components of such waste... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Waste characterization. 194.24 Section... PROGRAMS CRITERIA FOR THE CERTIFICATION AND RE-CERTIFICATION OF THE WASTE ISOLATION PILOT PLANT'S...

40 CFR 194.24 - Waste characterization.

Code of Federal Regulations, 2014 CFR

2014-07-01

... system. (e) Waste may be emplaced in the disposal system only if the emplaced components of such waste... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Waste characterization. 194.24 Section... PROGRAMS CRITERIA FOR THE CERTIFICATION AND RE-CERTIFICATION OF THE WASTE ISOLATION PILOT PLANT'S...

ISLAY containment data report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stubbs, T.; Heinle, R.

1997-06-01

This containment data report for the ISLAY event provides a description of the event, including the site, emplacement, and instrumentation. Stemming performance is reported, including radiation pressure and motion. Collapse phenomena are reported, including motion and radiation pressure. Measurements on the emplacement pipe are reported, including motion, pressure, temperature, and radiation.

Magma Emplacement Processes of the Oligocene Zákupy and Miocene Měrunice Diatremes, Czech Republic: Revealed via Petrography, Anisotropy of Magnetic Susceptibility, Paleomegnetic, and Ground Magnetometry Data

NASA Astrophysics Data System (ADS)

Shields, Sarah; Petronis, Michael; Rapprich, Vladislav; Valenta, Jan

2016-04-01

The emplacement of silica-undersaturated magma in continental rift volcanoes remains poorly understood because the roots of these systems are not often accessible. The Miocene Měrunice and Oligocene Zákupy diatremes, Czech Republic, are located within or on the SE shoulder of the Eger Rift. These diatremes provide a unique opportunity to conduct a comparative emplacement study, in near 3-dimensions, of their sub-volcanic magma plumbing systems. Studies across the rift reveal that magma compositions show a temporal evolution trend that coincides with three rift phases: melilitic-nephelinites during pre-rift (79-49 Ma); two magmas, weakly alkaline olivine basalts and strongly alkaline nephlelinite-tephrite-phonolites during syn-rift (42-16 Ma), and olivine foidites during late rift (16-0.3 Ma). Here we report preliminary data on how varying degrees of alkaline magma generation paired with a dynamic rift stress regime yield unique emplacement mechanisms of presumed monogenetic rift diatremes. Field observations and laboratory data at both diatremes indicate multiple emplacement and eruptive events, as shown by variation in eruptive materials and cross cutting relationships between dikes and sills that differ in emplacement dynamics. Anisotropy of magnetic susceptibility (AMS) data were collected from 25 Zákupy diatreme sites and reveal primarily oblate magnetic fabrics that we interpret to indicate that magma flowed up, down, and laterally away from the suspected main conduit. Preliminary paleomagnetic data reveal that the intrusions are of reversed polarity and show some scatter about the expected reverse polarity reference direction that could be related to sub-volcanic deformation of the diatreme. In addition, ground magnetometry data indicate that the main conduit is likely located at the center of the quarry as shown by a magnetic low with a magnetic high radiating around the probable conduit. Curie point estimates show that the magnetic mineral phases carrying the characteristic remanent magnetization are moderate to high titanomagnetite with ilmenite inclusions in clinopyroxene. AMS data from the main feeder dikes from the Měrunice diatreme display a steep upward NW and NE emplacement trend. Petrologic observations indicate that the rocks are olivine basanites with little to no compositional variation between the intrusive and extrusive products. Paleomagnetic data from the Měrunice diatreme are underway and should aid with defining subvolcanic deformation during the growth of the diatreme. The results from this multidisciplinary study suggest that these presumed monogenetic systems display characteristics that are better described by a polygenetic emplacement model.

12. Battery Richmond, emplacement no. 1, iron stair from terreplein ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. Battery Richmond, emplacement no. 1, iron stair from terreplein up to loading platform. Beneath stair is doorway to powder room, at left is an entrance to the shot gallery; at center is entance to guard room - Forth Wadsworth Battery Richmond, Fort Wadsworth, Staten Island, New York County, NY

Task Order 22 – Engineering and Technical Support, Deep Borehole Field Test. AREVA Summary Review Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Denton, Mark A.

Under Task Order 22 of the industry Advisory and Assistance Services (A&AS) Contract to the Department of Energy (DOE) DE-NE0000291, AREVA has been tasked with providing assistance with engineering, analysis, cost estimating, and design support of a system for disposal of radioactive wastes in deep boreholes (without the use of radioactive waste). As part of this task order, AREVA was requested, through a letter of technical direction, to evaluate Sandia National Laboratory’s (SNL’s) waste package borehole emplacement system concept recommendation using input from DOE and SNL. This summary review report (SRR) documents this evaluation, with its focus on the primarymore » input document titled: “Deep Borehole Field Test Specifications/M2FT-15SN0817091” Rev. 1 [1], hereafter referred to as the “M2 report.” The M2 report focuses on the conceptual design development for the Deep Borehole Field Test (DBFT), mainly the test waste packages (WPs) and the system for demonstrating emplacement and retrieval of those packages in the Field Test Borehole (FTB). This SRR follows the same outline as the M2 report, which allows for easy correlation between AREVA’s review comments, discussion, potential proposed alternatives, and path forward with information established in the M2 report. AREVA’s assessment focused on three primary elements of the M2 report: the conceptual design of the WPs proposed for deep borehole disposal (DBD), the mode of emplacement of the WP into DBD, and the conceptual design of the DBFT. AREVA concurs with the M2 report’s selection of the wireline emplacement mode specifically over the drill-string emplacement mode and generically over alternative emplacement modes. Table 5-1 of this SRR compares the pros and cons of each emplacement mode considered viable for DBD. The primary positive characteristics of the wireline emplacement mode include: (1) considered a mature technology; (2) operations are relatively simple; (3) probability of a radiological release due to off-normal events are relatively low; (4) costs are relatively low; and (5) maintenance activities are relatively simple. The primary drawback associated with the wireline emplacement mode for DBD is the number of emplacement trips-in to the borehole, which results in a relatively higher probability for a drop event. Fortunately, the WPs can be engineered with impact limiters that will minimize the likelihood of a breach of the WP due to a drop. The WP designs presented in the M2 report appear to be focused on compatibility with the drill-string emplacement mode (e.g., the threaded connections). With the recommendation that the wireline emplacement mode be utilized for the DBFT, some changes may be warranted to these WPs. For example, the development of a WP release connection that is more reliable than the currently credited connection, which is considered to have a high failure probability, and the integration of an impact limiter into its design. The M2 report states the engineering demonstration of the DBFT will occur in the FTB over a 4-year period. AREVA recommends development and testing of the WP emplacement handling equipment occur separately (but concurrently, if not earlier) from the FTB at a mock-up facility. The separation of this activity would prevent schedule interference between the science and engineering thrusts of the project. Performing tests in a mock-up facility would allow additional control and observation compared to the FTB. The mock-up facility could also be utilized as a training facility for future operations. Terminal velocity and impact limiter testing would require the FTB for testing, since these areas would be difficult to reproduce in a limited depth mock-up. Although only at the end of the conceptual stage of design development, DBD appears to be a viable solution for some waste forms produced by the nuclear industry. However, regulatory requirements have yet to be established for pre- and post-closure performance of DBD and should be established as soon as possible. Some of the main areas of focus from a regulatory perspective include: (1) establishing acceptable performance requirements for the long-term behavior of DBD; (2) determining acceptable borehole abandonment criteria; (3) establishing retrievability requirements; (4) developing a consensus on the factor of safety (FoS) for the emplacement mode and WP; and (5) establishing safety and safeguards performance requirements for DBD. Although conservative requirements have been utilized to provide the foundation for the conceptual design of DBD, regulatory requirements and feedback are necessary to confirm recommendations made herein and to ensure the long-term performance of DBD is acceptable. The combination of the M2 report and this SRR is intended to facilitate the completion of the conceptual design for DBD for the Cs and Sr capsules and calcined waste forms. Using the conceptual design, preliminary design activities (the second stage of a three-stage process described in the M2 report) can proceed and the DBFT utilized to support, demonstrate, and confirm engineering elements of this design.« less

DETAIL OF THE SLOPING CONCRETE PAD AT THE SOUTH SIDE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL OF THE SLOPING CONCRETE PAD AT THE SOUTH SIDE OF THE GUN EMPLACEMENT. NOTE ADDED BLOCK OF CAST CONCRETE AT THE LOW (RIGHT) END OF SLOPED PAD. VIEW FACING SOUTHWEST - U.S. Naval Base, Pearl Harbor, Ford Island 5-Inch Antiaircraft Battery, East Gun Emplacement, Ford Island, Pearl City, Honolulu County, HI

From Embodiment to Emplacement: Re-Thinking Competing Bodies, Senses and Spatialities

ERIC Educational Resources Information Center

Pink, Sarah

2011-01-01

In this article I discuss how a shift from theories of embodiment to one of emplacement can inform how we understand the performing body in competitive and pedagogical contexts. I argue that recent theoretical advances concerning the senses, human perception and place offer new analytical possibilities for understanding skilled performances and…

Erratum: Correction to: Emplacement controls for the basaltic-andesitic radial dikes of Summer Coon volcano and implications for flank vents at stratovolcanoes

NASA Astrophysics Data System (ADS)

Harp, A. G.; Valentine, G. A.

2018-06-01

In the article "Emplacement controls for the basaltic-andesitic radial dikes of Summer Coon volcano and implications for flank vents at stratovolcanoes", the vertical axis for Fig. 8 a was incorrectly labeled (i.e., the value for dikes per km2).

Estimating the Life Cycle Cost of Space Systems

NASA Technical Reports Server (NTRS)

Jones, Harry W.

2015-01-01

A space system's Life Cycle Cost (LCC) includes design and development, launch and emplacement, and operations and maintenance. Each of these cost factors is usually estimated separately. NASA uses three different parametric models for the design and development cost of crewed space systems; the commercial PRICE-H space hardware cost model, the NASA-Air Force Cost Model (NAFCOM), and the Advanced Missions Cost Model (AMCM). System mass is an important parameter in all three models. System mass also determines the launch and emplacement cost, which directly depends on the cost per kilogram to launch mass to Low Earth Orbit (LEO). The launch and emplacement cost is the cost to launch to LEO the system itself and also the rockets, propellant, and lander needed to emplace it. The ratio of the total launch mass to payload mass depends on the mission scenario and destination. The operations and maintenance costs include any material and spares provided, the ground control crew, and sustaining engineering. The Mission Operations Cost Model (MOCM) estimates these costs as a percentage of the system development cost per year.

Logistics Modeling of Emplacement Rate and Duration of Operations for Generic Geologic Repository Concepts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalinina, Elena Arkadievna; Hardin, Ernest

This study identified potential geologic repository concepts for disposal of spent nuclear fuel (SNF) and (2) evaluated the achievable repository waste emplacement rate and the time required to complete the disposal for these concepts. Total repository capacity is assumed to be approximately 140,000 MT of spent fuel. The results of this study provide an important input for the rough-order-of-magnitude (ROM) disposal cost analysis. The disposal concepts cover three major categories of host geologic media: crystalline or hard rock, salt, and argillaceous rock. Four waste package sizes are considered: 4PWR/9BWR; 12PWR/21BWR; 21PWR/44BWR, and dual purpose canisters (DPCs). The DPC concepts assumemore » that the existing canisters will be sealed into disposal overpacks for direct disposal. Each concept assumes one of the following emplacement power limits for either emplacement or repository closure: 1.7 kW; 2.2 kW; 5.5 kW; 10 kW; 11.5 kW, and 18 kW.« less

Anisotropy of Magnetic Susceptibility of Silicic Rocks From Quarries in the Vicinity of São Marcos, Rio Grande Do Sul, South Brazil: Implications for Emplacement Mechanisms.

NASA Astrophysics Data System (ADS)

Canon-Tapia, E.; Raposo, M. I. B.

2017-12-01

The Paraná-Etendeka Large Igneous Province includes felsic volcanic rocks whose mechanism of emplacement and location of their eruptive sources are controversial. Opening of several quarries of dimension stone near the city of Sao Marcos, Rio Grande do Sul, Brazil, offers a unique opportunity to study in detail some of those products. Here, we present the results of a study of the anisotropy of magnetic susceptibility (AMS) completed in some rocks that had been interpreted as the roots of volcanic conduits. Our results, and reexamination of the textural features of the rocks, lead to a reinterpretation that suggests that these rocks were emplaced subaerially, and involved assimilation and remelting of clastic components of previous lavas. The extremely high eruption temperatures of the lavas promoted the development of peperite-like textures and mixing patterns similar to those observed in plutonic environments. Due to the inferred conditions of emplacement, it is unlikely that the eruptive vents are located far from the area of study, therefore ruling out the long-travelled nature of these products.

Anisotropy of magnetic susceptibility of silicic rocks from quarries in the vicinity of São Marcos, Rio Grande do Sul, South Brazil: Implications for emplacement mechanisms

NASA Astrophysics Data System (ADS)

Cañón-Tapia, Edgardo; Raposo, M. Irene B.

2018-04-01

The Paraná-Etendeka Large Igneous Province includes acid volcanic rocks that can be found throughout its extension. Several aspects concerning those rocks remain controversial, including their mechanism of emplacement and location of their eruptive sources. Opening of several quarries of dimension stone near the city of Sao Marcos, Rio Grande do Sul, Brazil, offers a unique opportunity to study in detail the acid products. Here, we present the results of a study of the anisotropy of magnetic susceptibility (AMS) completed in some rocks that had been interpreted as the roots of volcanic conduits. Our results, and reexamination of the textural features of the rocks, lead to a reinterpretation that suggests that these rocks were emplaced subaerially, and involved assimilation and remelting of clastic components of previous products. Due to the inferred conditions of emplacement, it is unlikely that the eruptive vents are located far from the area of study, therefore ruling out the long-travelled nature of these products.

Local-scale stratigraphy of grooved terrain on Ganymede

NASA Technical Reports Server (NTRS)

Murchie, Scott L.; Head, James W.; Helfenstein, Paul; Plescia, Jeffrey B.

1987-01-01

The surface of the Jovian satellite, Ganymede, is divided into two main units, dark terrain cut by arcuate and subradial furrows, and light terrain consisting largely of areas with pervasive U-shaped grooves. The grooved terrain may be subdivided on the basis of pervasive morphology of groove domains into four terrain types: (1) elongate bands of parallel grooves (groove lanes); (2) polygonal domains of parallel grooves (grooved polygons); (3) polygonal domains of two orthogonal groove sets (reticulate terrain); and (4) polygons having two to several complexly cross-cutting groove sets (complex grooved terrain). Reticulate terrain is frequently dark and not extensively resurfaced, and grades to a more hummocky terrain type. The other three grooved terrain types have almost universally been resurfaced by light material during their emplacement. The sequence of events during grooved terrain emplacement has been investigated. An attempt is made to integrate observed geologic and tectonic patterns to better constrain the relative ages and styles of emplacement of grooved terrain types. A revised model of grooved terrain emplacement is proposed and is tested using detailed geologic mapping and measurement of crater density.

Temporal and structural evolution of the Early Palæogene rocks of the Seychelles microcontinent.

PubMed

Shellnutt, J Gregory; Yeh, Meng-Wan; Suga, Kenshi; Lee, Tung-Yi; Lee, Hao-Yang; Lin, Te-Hsien

2017-03-14

The Early Palæogene Silhouette/North Island volcano-plutonic complex was emplaced during the rifting of the Seychelles microcontinent from western India. The complex is thought to have been emplaced during magnetochron C28n. However, the magnetic polarities of the rocks are almost entirely reversed and inconsistent with a normal polarity. In this study we present new in situ zircon U/Pb geochronology of the different intrusive facies of the Silhouette/North Island complex in order to address the timing of emplacement and the apparent magnetic polarity dichotomy. The rocks from Silhouette yielded weighted mean 206 Pb/ 238 U ages from 62.4 ± 0.9 Ma to 63.1 ± 0.9 Ma whereas the rocks from North Island yielded slightly younger mean ages between 60.6 ± 0.7 Ma to 61.0 ± 0.8 Ma. The secular latitudinal variation from Silhouette to North Island is consistent with the anticlockwise rotation of the Seychelles microcontinent and the measured polarities. The rocks from Silhouette were emplaced across a polarity cycle (C26r-C27n-C27r) and the rocks from North Island were emplaced entirely within a magnetic reversal (C26r). Moreover, the rocks from North Island and those from the conjugate margin of India are contemporaneous and together mark the culmination of rift-related magmatism.

Experimental Modeling of the Formation of Saucer-Shaped sills

NASA Astrophysics Data System (ADS)

Galland, O.; Planke, S.; Malthe-Sorenssen, A.

2007-12-01

Many magma intrusions in sedimentary basins are sills, and especially saucer-shaped sills. These features are observed in many places (i.e. South Africa; the Norwegian and North Sea; Siberia; Argentina). Sand injectites exhibit similar geometries. The occurrence of such features in so various settings suggests that their emplacement results from fundamental processes in sedimentary basins. To understand such processes, we performed experimental modeling of saucer-shaped sill emplacement. The experiments consist of injecting a molten low viscosity vegetable oil (model magma) at a constant flow rate into a fine-grained Coulomb silica flour (model rock). When the oil starts intruding, the initially flat surface of the model inflates and forms a smooth dome. At the end of the experiment, the oil erupts at the edge of the dome. After the experiment, the oil cools and solidifies, the resulting solid intrusion is unburied and exposed, and its upper surface digitalized. For our purpose, we did our experiments without external deformation. We performed two series of experiments with varying depth of injection. The first series consisted of injection into a homogeneous medium. The resulting intrusions were cone-sheets and dykes. The second series consisted of heterogeneous models where the heterogeneity was a weak layer made of a flexible net. The resulting intrusions were made of (1) a horizontal basal sill emplaced along the weakness, and (2) inclined sheets nucleating at the edges of the basal sill and propagating upward and outward. The inclined sheets exhibited a convex shape, i.e. a decreasing slope outward. In addition, the deeper the sills emplaced, the larger they were. Our experimental results are consistent with saucer-shaped features in nature. We infer from our results that the transition between the basal sills and the inclined sheets results from a transition of emplacement processes. We suggest that the basal sill emplace by open (mode I) fracturing, whereas the inclined sheets result from shear (mode II) fracturing, i.e. along faults at the edge of the dome.

Basement diapirism associated with the emplacement of major ophiolite nappes: Some constraints

NASA Astrophysics Data System (ADS)

Andrews-Speed, C. P.; Johns, C. C.

1985-09-01

The association of basement uplifts with major ophiolite nappes in some Phanerozoic orogenic belts suggests that gravitational instability results in the local diapiric uplift of the basement following ophiolite emplacement. In previous analyses of diapirism in crustal silicate rocks, viscous behaviour of rocks has been assumed. It is argued that this assumption is not valid. An alternative analysis is offered to determine whether or not the stress would be sufficient for diapirism to occur. The negative buoyancy stress resulting from the emplacement of an ophiolite nappe 5-15 km thick onto continental basement may be in the range 10-50 MPa. If the horizontal deviatoric stress is zero, this will be the maximum principal compressive stress. After ophiolite emplacement the thermal profile through the ophiolite and the basement will relax from a saw-tooth form to an equilibrium profile. If the ophiolite is young and thick there will be a zone of ductile strain in the lower part of the ophiolite and in the upper part of the continental basement. Results from steady-state creep experiments suggest that temperatures in this zone may be high enough for a short time after ophiolite emplacement (3 Ma or more) for the rocks in this zone to deform at geologically significant strain rates (10 -14 or greater) in response to the negative buoyancy stress. A thin ophiolite or rapid erosion will result in this ductile zone being absent or too short-lived for significant strain. Aquaeous fluids may reduce the strength of brittle rocks by decreasing the effective normal stress or by encouraging pressure solution creep. Evidence suggests that the deviatoric stress across presently active faults may be as low at 10 MPa. Thus diapirism in response to ophiolite emplacement may occur through brittle strain. Gravity spreading within the ophiolite is an alternative mechanism for accommodating the gravitational instability. The critical evidence lies in the field.

The propagation direction of mafic radial dikes inferred from flow-direction analysis of an exposed radial dike sequence, Summer Coon Volcano, Colorado, USA

NASA Astrophysics Data System (ADS)

Harp, A.; Valentine, G.

2016-12-01

Mafic eruptions along the flanks of stratovolcanoes pose significant hazards to life and property due to the uncertainty linked to new vent locations and their potentially close proximity to inhabited areas. Flank eruptions are often fed by radial dikes with magma supplied either laterally from the central conduit or vertically from a deeper storage location. The highly eroded Oligocene age Summer Coon stratovolcano, Colorado reveals over 700 mafic dikes surrounding a series of intrusive stocks (inferred conduit). The exposure provides an opportunity to study radial dike propagation directions and their relationship with the conduit in the lower portions of a volcanic edifice. Detailed geologic mapping and a geophysical survey revealed that little or no direct connection exists between the mafic radial dikes and the inferred conduit at the current level of exposure. Oriented samples collected from the chilled margins of 29 mafic dikes were analyzed for flow fabrics and emplacement directions. Among them, 20 dikes show flow angles greater than 30 degrees from horizontal, and a single dike had flow fabrics oriented at approximately 20 degrees. Of the dikes with steeper fabrics nine dikes were emplaced up and toward the volcano's center between 30-75 degrees from horizontal, and 11 dikes emplaced up and away from the volcano's center between 35-60 degrees. The two groups of dikes likely responded to the stress field within the edifice, where steepest-emplaced had relatively high magma overpressure and were focused toward the volcano's summit, while dikes with lower overpressures propagated out toward the flanks. At Summer Coon, the lack of connection between mafic dikes and the inferred conduit and presence of only one sub-horizontally emplaced dike implies the stresses within lower edifice impeded lateral dike nucleation and propagation while promoting and influencing the emplacement direction of upward propagating dikes.

Sill Emplacement and Forced Folding in the Canterbury Basin, offshore SE New Zealand

NASA Astrophysics Data System (ADS)

Reeves, Jennifer; Magee, Craig; Jackson, Christopher

2017-04-01

Sill-complexes are common in sedimentary basins worldwide. The geometry of sill-complexes and their associated deformation can be used to unravel tectono-magmatic events. For example, intruding magma may uplift the overburden and the free surface to produce forced folds that are typically either dome-shaped or flat-topped. These four-way dip closures can form suitable hydrocarbon traps and dating of onlapping of sedimentary strata allows the timing of emplacement, relative to hydrocarbon generation and migration to be assessed. Furthermore, these forced folds directly overlie the forcing intrusion and their volume is commonly assumed to equal that of the emplaced magma. This relationship between folds, which may be expressed that the Earth's surface, and magma volume is fundamental for volcano predication due to the use of ground deformation as a proxy for the location and magnitude of future eruptions. However, recent studies have demonstrated that fluidization of weak host rock can accommodate magma during non-brittle emplacement, producing little or no overburden deformation. Assessing the mechanics of intrusion-induced forced folding is therefore critical to a variety of Earth Science disciplines. Here, we use 3D seismic reflection data map four sills at a high-resolution within the underexplored Canterbury Basin, offshore SE New Zealand. We demonstrate that: (i) despite similar emplacement levels, forced folds are only developed above two of the sills, with no apparent uplift above the other two sills; (ii) onlap of sedimentary onto forced folds and associated hydrothermal vents indicates two episodes of sill emplacement in the Whaingaroan (34.6-31.8 Ma) and Opoitian (5.33-3.7 Ma); and (iii) intra-fold thickness is variable, with lower intervals within the folds displaying a flat-topped geometry overlain by sedimentary strata displaying dome-shaped folding. We discuss the formation of these forced folds as assess the role of non-brittle and inelastic deformation on the geometry and growth of forced folds.

The origins of radial fracture systems and associated large lava flows on Venus

NASA Technical Reports Server (NTRS)

Parfitt, Elisabeth A.; Wilson, Lionel; Head, James W., III

1992-01-01

Magellan images have revealed the existence of systems of radial fractures on venus that are very similar in form to terrestrial dike swarms such as the Mackenzie swarm in Northern Canada. The association of many of the fracture systems with lava flows, calderas, and volcanic edifices further support the idea of a dike emplacement origin. A global survey of the Magellan images has allowed the location of 300 such fracture systems. Two types of fracture systems are defined. A series of models were developed to simulate the emplacement of dikes on Venus. Observations of fracture lengths and widths were then used to constrain the emplacement conditions. The model results show that the great length and relatively large width of the fractures can only be explained if the dikes that produce them were emplaced in high driving pressure (pressure buffered) conditions. Such conditions imply high rates of melt production, which is consistent with the melt being derived directly from a plume head. We have recently modeled the vertical emplacement of a dike from the top of a mantle plume and calculated the eruption rates such a dike would produce on reaching the surface. This modeling shows that eruption rates of approximately 0.1 cu km/hr can readily be generated by such a dike, consistent with the above results. However, the sensitivity of the model to dike width and therefore driving pressure means that eruption rates from dikes emplaced from the base of the crust or the head of a mantle plume could be orders of magnitude higher than this. Clearly, therefore, the model needs to be refined in order to better constrain eruption conditions. However, it is worth noting here that the initial results do show that even for moderate dike widths, eruption rates could be at least on the order of those estimated for terrestrial flood basalts.

Using analog flow experiments to model morphologies developed during episodic dome growth: A case study of Mount St Helens, 1980-1986

NASA Astrophysics Data System (ADS)

Altman, K. M.; Teasdale, R.

2009-12-01

From 1980 to 1986 the dacite dome at Mount St. Helens was emplaced as a series of 17 events, identified by different growth rates, volumes, height to diameter ratios, emplacement rates, surface textures and dome morphologies (Swanson, 1989). Rates of emplacement characterize three periods; between October 18, 1980 and the end of 1981 the growth rate was 1.8 x 10^6 m^3/month; between March 1982 and March 1984 the growth rate was 1.3 x 10^6 m^3/month; followed by a growth rate of 0.62 x 10^6 m^3/month until the end of the emplacement events in 1986 (Swanson, 1989). The shape of the dome changed from 1980 to 1986 as a function of magma viscosity, tensile strength of the hot core, and thickness of the outer shell (Swanson, 1989). The height to diameter ratios (h:d) recorded throughout the growth of the dome have been used to quantify the changes in the shape of the dome. The dome was flatter during the first period of emplacement when larger volumes kept the dome hotter and hindered the formation of a thick, cool outer crust (Swanson, 1989). Once the growth rate slowed by June 1981, a thick skin had formed and allowed the dome to steepen (Swanson, 1989). Analog models presented here aim to reproduce the emplacement of the domes based on observations and data recorded at Mount St. Helens from 1980 to 1986. Flow experiments use a slurry of PEG (poly-ethelyne glycol) mixed with kaolin powder that is pumped into a tank of cold water (Fink and Griffiths, 1998). PEG is used because it is liquid at room temperature and solidifies in the cold water. Kaolin powder is added to the PEG to simulate the viscosity of the dacite domes. The observed and recorded data from Mount St. Helens are used to constrain analog flow model parameters such as slope, effusion rate, and PEG viscosity in an attempt to recreate the dome morphologies observed in the 1980 to 1986 episodes. As expected, dome morphology in experiments varies with the crustal thickness developed during experiments. The thickness of dome crust increases when the difference between water temperature and the slurry are large. Dome crust thickness controls the h:d ratio, which are used here to characterize dome morphology. The h:d ratio of experiments are within 5% of those measured at Mount St. Helens, so are considered good representations of dome growth events. Ongoing work investigates multiple episodes of dome emplacement using solid structures in the tanks to represent previously emplaced dome edifices.

A combined geochronological approach to investigating long lived granite magmatism, the Shap granite, UK

NASA Astrophysics Data System (ADS)

Miles, A. J.; Woodcock, N. H.

2018-04-01

With the advent of more precise dating methods, it has become apparent that zircon dates from granite plutons frequently indicate older emplacement ages than other dating methods. Here we attempt to reconcile a number of dating methods from the c. 5 km2 Caledonian Shap granite, Northern England. The results reveal a more complex and protracted evolution than indicated by application of any single dating method. Zircon U-Pb dates give a weighted mean age of 415.6 ± 1.4 (2σ) Ma. A mafic enclave, dated at 412 ± 2 (2σ) Ma (revised Rb-Sr feldspar age from Davidson et al., 2005), contains resorbed K-feldspar and zircon crystals scavenged from the host crystal mush. These ages are at odds with field relations in the thermal aureole that suggest final emplacement at approximately 404 Ma or later during Acadian deformation. Previously reported Re-Os ages on molybdenites associated with magmatic fluids, have given ages of 405.2 ± 1.8 (2σ) Ma (Selby et al., 2008) and confirm the overlap of at least some magmatic activity with Acadian deformation. A similar emplacement age is supported by Rb-Sr whole-rock-mineral and biotite K-Ar dates when adjusted for revised decay constants (402 ± 3 Ma and 401 ± 7 Ma, respectively, Wadge et al., 1978). The lower closure temperatures of these systems relative to the U-Pb system in zircon means that they are more likely to record the timing of final granite emplacement. These data suggest that most zircons grew before final granite emplacement, by about 10 Ma on average. We suggest that the majority of zircon crystals record pre-emplacement magmatic activity within a deeper part of the system. Mafic enclaves and their scavenged cargo of crystals record the assembly of a mid-crustal batholith where crystals remained at least locally mobile at 412 Ma. Gravity data support the existence of an extensive, 1500 km2 intrusive body, originally at about 15 km depth beneath Shap. This batholith is likely to have remained below the granite solidus for much of its existence due to conductive heat loss, but episodic influxes of silicic magma between c. 412 and 405 Ma are thought to have enabled periods of rejuvenation. These influxes are recorded by complex compositional zoning patterns within K-feldspar megacrysts. The Shap granite itself is likely to represent a rejuvenated crystal slurry, emplaced as a cylindrical cupola above the main magma body during Acadian transpression. This study highlights the importance of integrating different dating techniques and that final emplacement of granites can only be indicated by the youngest zircon ages.

Compound parabolic concentrator with cavity for tubular absorbers

DOEpatents

Winston, Roland

1983-01-01

A compond parabolic concentrator with a V-shaped cavity is provided in which an optical receiver is emplaced. The cavity redirects all energy entering between the receiver and the cavity structure onto the receiver, if the optical receiver is emplaced a distance from the cavity not greater than 0.27 r (where r is the radius of the receiver).

Curie temperatures of titanomagnetite in ignimbrites: Effects of emplacement temperatures, cooling rates, exsolution, and cation ordering

NASA Astrophysics Data System (ADS)

Jackson, Mike; Bowles, Julie A.

2014-11-01

Pumices, ashes, and tuffs from Mt. St. Helens and from Novarupta contain two principal forms of titanomagnetite: homogeneous grains with Curie temperatures in the range 350-500°C and oxyexsolved grains with similar bulk composition, containing ilmenite lamellae and having Curie temperatures above 500°C. Thermomagnetic analyses and isothermal annealing experiments in combination with stratigraphic settings and thermal models show that emplacement temperatures and cooling history may have affected the relative proportions of homogeneous and exsolved grains and have clearly had a strong influence on the Curie temperature of the homogeneous phase. The exsolved grains are most common where emplacement temperatures exceeded 600°C, and in laboratory experiments, heating to over 600°C in air causes the homogeneous titanomagnetites to oxyexsolve rapidly. Where emplacement temperatures were lower, Curie temperatures of the homogeneous grains are systematically related to overburden thickness and cooling timescales, and thermomagnetic curves are generally irreversible, with lower Curie temperatures measured during cooling, but little or no change is observed in room temperature susceptibility. We interpret this irreversible behavior as reflecting variations in the degree of cation ordering in the titanomagnetites, although we cannot conclusively rule out an alternative interpretation involving fine-scale subsolvus unmixing. Short-range ordering within the octahedral sites may play a key role in the observed phenomena. Changes in the Curie temperature have important implications for the acquisition, stabilization, and retention of natural remanence and may in some cases enable quantification of the emplacement temperatures or cooling rates of volcanic units containing homogeneous titanomagnetites.

Time-Lapse Electrical Geophysical Monitoring of Amendment-Based Biostimulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Timothy C.; Versteeg, Roelof; Day-Lewis, Frederick D.

Biostimulation is increasingly used to accelerate microbial remediation of recalcitrant groundwater contaminants. Effective application of biostimulation requires successful emplacement of amendment in the contaminant target zone. Verification of remediation performance requires postemplacement assessment and contaminant monitoring. Sampling based approaches are expensive and provide low-density spatial and temporal information. Time-lapse electrical resistivity tomography (ERT) is an effective geophysical method for determining temporal changes in subsurface electrical conductivity. Because remedial amendments and biostimulation-related biogeochemical processes often change subsurface electrical conductivity, ERT can complement and enhance sampling-based approaches for assessing emplacement and monitoring biostimulation-based remediation. Field studies demonstrating the ability of time-lapse ERTmore » to monitor amendment emplacement and behavior were performed during a biostimulation remediation effort conducted at the Department of Defense Reutilization and Marketing Office (DRMO) Yard, in Brandywine, Maryland, United States. Geochemical fluid sampling was used to calibrate a petrophysical relation in order to predict groundwater indicators of amendment distribution. The petrophysical relations were field validated by comparing predictions to sequestered fluid sample results, thus demonstrating the potential of electrical geophysics for quantitative assessment of amendment-related geochemical properties. Crosshole radar zero-offset profile and borehole geophysical logging were also performed to augment the data set and validate interpretation. In addition to delineating amendment transport in the first 10 months after emplacement, the time-lapse ERT results show later changes in bulk electrical properties interpreted as mineral precipitation. Results support the use of more cost-effective surfacebased ERT in conjunction with limited field sampling to improve spatial and temporal monitoring of amendment emplacement and remediation performance.« less

Time-lapse electrical geophysical monitoring of amendment-based biostimulation

USGS Publications Warehouse

Johnson, Timothy C.; Versteeg, Roelof J.; Day-Lewis, Frederick D.; Major, William; Lane, John W.

2015-01-01

Biostimulation is increasingly used to accelerate microbial remediation of recalcitrant groundwater contaminants. Effective application of biostimulation requires successful emplacement of amendment in the contaminant target zone. Verification of remediation performance requires postemplacement assessment and contaminant monitoring. Sampling-based approaches are expensive and provide low-density spatial and temporal information. Time-lapse electrical resistivity tomography (ERT) is an effective geophysical method for determining temporal changes in subsurface electrical conductivity. Because remedial amendments and biostimulation-related biogeochemical processes often change subsurface electrical conductivity, ERT can complement and enhance sampling-based approaches for assessing emplacement and monitoring biostimulation-based remediation.Field studies demonstrating the ability of time-lapse ERT to monitor amendment emplacement and behavior were performed during a biostimulation remediation effort conducted at the Department of Defense Reutilization and Marketing Office (DRMO) Yard, in Brandywine, Maryland, United States. Geochemical fluid sampling was used to calibrate a petrophysical relation in order to predict groundwater indicators of amendment distribution. The petrophysical relations were field validated by comparing predictions to sequestered fluid sample results, thus demonstrating the potential of electrical geophysics for quantitative assessment of amendment-related geochemical properties. Crosshole radar zero-offset profile and borehole geophysical logging were also performed to augment the data set and validate interpretation.In addition to delineating amendment transport in the first 10 months after emplacement, the time-lapse ERT results show later changes in bulk electrical properties interpreted as mineral precipitation. Results support the use of more cost-effective surface-based ERT in conjunction with limited field sampling to improve spatial and temporal monitoring of amendment emplacement and remediation performance.

EVALUATION OF RISKS AND WASTE CHARACTERIZATION REQUIREMENTS FOR THE TRANSURANIC WASTE EMPLACED IN WIPP DURING 1999

DOE Office of Scientific and Technical Information (OSTI.GOV)

Channell, J.K.; Walker, B.A.

2000-05-01

Specifically this report: 1. Compares requirements of the WAP that are pertinent from a technical viewpoint with the WIPP pre-Permit waste characterization program, 2. Presents the results of a risk analysis of the currently emplaced wastes. Expected and bounding risks from routine operations and possible accidents are evaluated; and 3. Provides conclusions and recommendations.

Emplacement of the youngest flood lava on Mars: A short, turbulent story

USGS Publications Warehouse

Jaeger, W.L.; Keszthelyi, L.P.; Skinner, J.A.; Milazzo, M.P.; McEwen, A.S.; Titus, T.N.; Rosiek, M.R.; Galuszka, D.M.; Howington-Kraus, E.; Kirk, R.L.

2010-01-01

Recently acquired data from the High Resolution Imaging Science Experiment (HiRISE), Context (CTX) imager, and Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) onboard the Mars Reconnaissance Orbiter (MRO) spacecraft were used to investigate the emplacement of the youngest flood-lava flow on Mars. Careful mapping finds that the Athabasca Valles flood lava is the product of a single eruption, and it covers 250,000 km2 of western Elysium Planitia with an estimated 5000-7500 km3 of mafic or ultramafic lava. Calculations utilizing topographic data enhanced with MRO observations to refine the dimensions of the channel system show that this flood lava was emplaced turbulently over a period of only a few to several weeks. This is the first well-documented example of a turbulently emplaced flood lava anywhere in the Solar System. However, MRO data suggest that this same process may have operated in a number of martian channel systems. The magnitude and dynamics of these lava floods are similar to the aqueous floods that are generally believed to have eroded the channels, raising the intriguing possibility that mechanical erosion by lava could have played a role in their incision. ?? 2009.

Emplacement of the youngest flood lava on Mars: A short, turbulent story

USGS Publications Warehouse

Jaeger, W.L.; Keszthelyi, L.P.; Skinner, J.A.; Milazzo, M.P.; McEwen, A.S.; Titus, T.N.; Rosiek, M.R.; Galuszka, D.M.; Howington-Kraus, E.; Kirk, R.L.

2009-01-01

Recently acquired data from the High Resolution Imaging Science Experiment (HiRISE), Context (CTX) imager, and Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) onboard the Mars Reconnaissance Orbiter (MRO) spacecraft were used to investigate the emplacement of the youngest flood-lava flow on Mars. Careful mapping finds that the Athabasca Valles flood lava is the product of a single eruption, and it covers 250,000 km2 of western Elysium Planitia with an estimated 5000-7500 km3 of mafic or ultramafic lava. Calculations utilizing topographic data enhanced with MRO observations to refine the dimensions of the channel system show that this flood lava was emplaced turbulently over a period of only a few to several weeks. This is the first well-documented example of a turbulently emplaced flood lava anywhere in the Solar System. However, MRO data suggest that this same process may have operated in a number of martian channel systems. The magnitude and dynamics of these lava floods are similar to the aqueous floods that are generally believed to have eroded the channels, raising the intriguing possibility that mechanical erosion by lava could have played a role in their incision.

Role of strike-slip faulting in the evolution of allochthonous terranes in the Philippines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karig, D.E.; Sarewitz, D.R.; Haeck, G.D.

1986-10-01

Concepts of allochthonous terrane transport and emplacement are dominated by the assumption that most terranes originate on the subducting plate, collide with the upper plate, and are emplaced there. Movement of terranes along the convergent margin is recognized but is generally attributed to postcollision slip. In the northern Philippines, allochthonous terranes originate primarily within the arc system, have been translated along it by strike-slip faults, and were emplaced by cessation of that slip. The authors suggest that in the Philippines some originally vertical strike-slip boundaries may have evolved into shallow-dipping sutures marked by fold and thrust systems. This mode ofmore » terrane evolution may be more common than generally appreciated, particularly in orogenic belts developed in response to oblique convergence.« less

Ground-water flow model of the Boone formation at the Tar Creek superfund site, Oklahoma and Kansas

USGS Publications Warehouse

Reed, T.B.; Czarnecki, John B.

2006-01-01

Extensive mining activities conducted at the Tar Creek Superfund site, one of the largest Superfund sites in the United States, pose substantial health and safety risks. Mining activities removed a total of about 6,000,000 tons of lead and zinc by 1949. To evaluate the effect of this mining on the ground-water flow, a MODFLOW 2000 digital model has been developed to simulate ground-water flow in the carbonate formations of Mississippian age underlying the Tar Creek Superfund site. The model consists of three layers of variable thickness and a grid of 580 rows by 680 columns of cells 164 feet (50 meters) on a side. Model flux boundary conditions are specified for rivers and general head boundaries along the northern boundary of the Boone Formation. Selected cells in layer 1 are simulated as drain cells. Model calibration has been performed to minimize the difference between simulated and observed water levels in the Boone Formation. Hydraulic conductivity values specified during calibration range from 1.3 to 35 feet per day for the Boone Formation with the larger values occurring along the axis of the Miami Syncline where horizontal anisotropy is specified as 10 to 1. Hydraulic conductivity associated with the mine void is set at 50,000 feet per day and a specific yield of 1.0 is specified to represent that the mine void is filled completely with water. Residuals (the difference between measured and simulated ground-water altitudes) has a root-mean-squared value of 8.53 feet and an absolute mean value of 7.29 feet for 17 observed values of water levels in the Boone Formation. The utility of the model for simulating and evaluating the possible consequences of remediation activities has been demonstrated. The model was used to simulate the emplacement of chat (mine waste consisting of fines and fragments of chert) back into the mine. Scenarios using 1,800,000 and 6,500,000 tons of chat were run. Hydraulic conductivity was reduced from 50,000 feet per day to 35 feet per day in the model cells corresponding to chat emplacement locations. A comparison of the simulated baseline conditions and conditions after simulated chat emplacement revealed little change in water levels, drainage and stream flux, and ground-water flow velocity. Using the calibrated flow model, particle tracks were simulated using MODPATH to evaluate the simultaneous movement of particles with water in the vicinity of four potential sites at which various volumes of chat might be emplaced in the underground mine workings as part of potential remediation efforts at the site. Particle tracks were generated to follow the rate and direction of water movement for a simulated period of 100 years. In general, chat emplacement had minimal effect on the direction and rate of movement when compared to baseline (current) flow conditions. Water-level differences between baseline and chat-emplacement scenarios showed declines as much as 2 to 3 feet in areas immediately downgradient from the chat emplacement cells and little or no head change upgradient. Chat emplacements had minimal effect on changes in surfacewater flux with the largest simulated difference in one cell between baseline and chat emplacement scenarios being about 3.5 gallons per minute.

Wireless Sensor Networks for Detection of IED Emplacement

DTIC Science & Technology

2009-06-01

unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 Abstract We are investigating the use of wireless nonimaging -sensor...networks for the difficult problem of detection of suspicious behavior related to IED emplacement. Hardware for surveillance by nonimaging -sensor networks...with people crossing a live sensor network. We conclude that nonimaging -sensor networks can detect a variety of suspicious behavior, but

Extent and impact of Cretaceous magmatism on the formation and evolution of Jurassic oceanic crust in the western Pacific

NASA Astrophysics Data System (ADS)

Feng, H.; Lizarralde, D.; Tominaga, M.; Hart, L.; Tivey, M.; Swift, S. A.

2015-12-01

Multi-channel seismic (MCS) images and wide-angle sonobuoy data acquired during a 2011 cruise on the R/V Thomas G. Thompson (TN272) show widespread emplacement of igneous sills and broadly thickened oceanic Layer 2 through hundreds of kilometers of oceanic crust in one of the oldest ocean basins in the western Pacific, a region known as the Jurassic Quiet Zone (JQZ). Oceanic crust from the JQZ has grown through at least two main magmatic phases: It was formed by mid-ocean ridge processes in the Jurassic (at ~170 Ma), and then it was added to by a substantial Cretaceous magmatic event (at ~75-125 Ma). The scale of Cretaceous magmatism is exemplified by massive seafloor features such as the Ontong Java Plateau, Mid-Pacific Mountains, Marshall-Gilbert Islands, Marcus-Wake Seamount Chain, and numerous guyots, seamounts, and volcaniclastic flows observed throughout the region. We use seismic data to image heavily intruded and modified oceanic crust along an 800-km-long transect through the JQZ in order to examine how processes of secondary crustal growth - including magmatic emplacement, transport, and distribution - are expressed in the structure of modified oceanic crust. We also model gravity anomalies to constrain crustal thickness and depth to the Moho. Our observations suggest that western Pacific crust was modified via the following modes of emplacement: (a) extrusive seafloor flows that may or may not have grown into seamounts, (b) seamounts formed through intrusive diking that pushed older sediments aside during their formation, and (c) igneous sills that intruded sediments at varying depths. Emplacement modes (a) and (b) tend to imply a focused, pipe-like mechanism for melt transport through the lithosphere. Such a mechanism does not explain the observed broadly distributed intrusive emplacement of mode (c) however, which may entail successive sill emplacement between igneous basement and sediments thickening oceanic Layer 2 along ~400 km of our seismic line. This mode of crustal growth seems to require broad zones of melt transport through the lithosphere and across the Moho.

Post-emplacement cooling and contraction of lava flows: InSAR observations and thermal model for lava fields at Hekla volcano, Iceland

NASA Astrophysics Data System (ADS)

Wittmann, Werner; Dumont, Stephanie; Lavallee, Yan; Sigmundsson, Freysteinn

2016-04-01

Gradual post-emplacement subsidence of lava flows has been observed at various volcanoes, e.g. Okmok volcano in Alaska, Kilauea volcano on Hawaii and Etna volcano on Sicily. In Iceland, this effect has been observed at Krafla volcano and Hekla volcano. The latter was chosen as a case study for investigating subsidence mechanisms, specifically thermal contraction. Effects like gravitational loading, clast repacking or creeping of a hot and liquid core can contribute to subsidence of emplaced lava flows, but thermal contraction is considered being a crucial effect. The extent to which it contributes to lava flow subsidence is investigated by mapping the relative movement of emplaced lava flows and flow substrate, and modeling the observed signal. The slow vegetation in Iceland is advantageous for Interferometric Synthetic Aperture Radar (InSAR) and offers great coherence over long periods after lava emplacement, expanding beyond the outlines of lava flows. Due to this reason, InSAR observations over volcanoes in Iceland have taken place for more than 20 years. By combining InSAR tracks from ERS, Envisat and Cosmo-SkyMed satellites we gain six time series with a total of 99 interferograms. Making use of the high spatial resolution, a temporal trend of vertical lava movements was investigated over a course of over 23 years over the 1991 lava flow of Hekla volcano, Iceland. From these time series, temporal trends of accumulated subsidence and subsidence velocities were determined in line of sight of the satellites. However, the deformation signal of lava fields after emplacement is vertically dominated. Subsidence on this lava field is still ongoing and subsidence rates vary from 14.8 mm/year in 1995 to about 1.0 mm/year in 2014. Fitting a simple exponential function suggests a exponential decay constant of 5.95 years. Additionally, a one-dimensional, semi-analytical model was fitted to these data. While subsidence due to phase change is calculated analytically, subsidence due to thermal contraction gives additional subsidence, which is calculated numerically. Inversions were carried out for initial lava thickness, thermal expansivity, thermal diffusivity, latent heat and specific heat as the crucial parameters governing lava flow subsidence.

Flood lavas on Earth, Io and Mars

USGS Publications Warehouse

Keszthelyi, L.; Self, S.; Thordarson, T.

2006-01-01

Flood lavas are major geological features on all the major rocky planetary bodies. They provide important insight into the dynamics and chemistry of the interior of these bodies. On the Earth, they appear to be associated with major and mass extinction events. It is therefore not surprising that there has been significant research on flood lavas in recent years. Initial models suggested eruption durations of days and volumetric fluxes of order 107 m3 s-1 with flows moving as turbulent floods. However, our understanding of how lava flows can be emplaced under an insulating crust was revolutionized by the observations of actively inflating pahoehoe flows in Hawaii. These new ideas led to the hypothesis that flood lavas were emplaced over many years with eruption rates of the order of 104 m3 s-1. The field evidence indicates that flood lava flows in the Columbia River Basalts, Deccan Traps, Etendeka lavas, and the Kerguelen Plateau were emplaced as inflated pahoehoe sheet flows. This was reinforced by the observation of active lava flows of ??? 100 km length on Io being formed as tube-fed flow fed by moderate eruption rates (102-103 m3 s-1). More recently it has been found that some flood lavas are also emplaced in a more rapid manner. New high-resolution images from Mars revealed 'platy-ridged' flood lava flows, named after the large rafted plates and ridges formed by compression of the flow top. A search for appropriate terrestrial analogues found an excellent example in Iceland: the 1783-1784 Laki Flow Field. The brecciated Laki flow top consists of pieces of pahoehoe, not aa clinker, leading us to call this 'rubbly pahoehoe'. Similar flows have been found in the Columbia River Basalts and the Kerguelen Plateau. We hypothesize that these flows form with a thick, insulating, but mobile crust, which is disrupted when surges in the erupted flux are too large to maintain the normal pahoehoe mode of emplacement Flood lavas emplaced in this manner could have (intermittently) reached effusion rates of the order of 106 m3 s-1.

Volcanic arc emplacement onto the southernmost Appalachian Laurentian shelf: Characteristics and constraints

USGS Publications Warehouse

Tull, J.F.; Barineau, C.I.; Mueller, P.A.; Wooden, J.L.

2007-01-01

In the southernmost Appalachians, the Hillabee Greenstone, an Ordovician volcanic arc fragment, lies directly atop the outermost Laurentian Devonian-earliest Mississippian(?) shelf sequence at the structural top of the greenschist facies Talladega belt, the frontal metamorphic allochthon along this orogenic segment. The Hillabee Greenstone was emplaced between latest Devonian and middle Mississippian time. It and the uppermost Laurentian section were later repeated together within a series of map-scale imbricate slices of a postmetamorphic, dextral, transpressional, Alleghanian thrust duplex system that placed the high-grade eastern Blue Ridge allochthon atop the Talladega belt. Geochemical and geochronologic (U-Pb zircon) studies indicate that the Hillabee Greenstone's interstratified tholeiitic metabasalt and calc-alkaline metadacite/rhyolite formed within an extensional setting on continental crust ca. 460-470 Ma. Palinspastic reconstructions of the southern Appalachian Ordovician margin place the Hillabee Greenstone outboard of the present position of the Pine Mountain terrane and suggest links to Ordovician plutonism in the overlying eastern Blue Ridge, and possibly to widespread K-bentonite deposits within Ordovician platform units. The tectonic evolution of the Hillabee Greenstone exhibits many unusual and intriguing features, including: (1) premetamorphic emplacement along a basal cryptic thrust, which is remarkably concordant to both hanging wall and footwall sequences across its entire extent (>230 km), (2) formation, transport, and emplacement of the arc fragment accompanied by minimal deformation of the Hillabee Greenstone and underlying outer-margin shelf rocks, (3) emplacement temporally coincident with the adjacent collision of the younger, tectonically independent Ouachita volcanic arc with southeastern Laurentia. These features highlight strong contrasts in the Ordovician-Taconian evolution of the southern and northern parts of the Appalachian orogen. ?? 2007 Geological Society of America.

Constraints on the magnitude and rate of CO2 dissolution at Bravo Dome natural gas field

PubMed Central

Sathaye, Kiran J.; Hesse, Marc A.; Cassidy, Martin; Stockli, Daniel F.

2014-01-01

The injection of carbon dioxide (CO2) captured at large point sources into deep saline aquifers can significantly reduce anthropogenic CO2 emissions from fossil fuels. Dissolution of the injected CO2 into the formation brine is a trapping mechanism that helps to ensure the long-term security of geological CO2 storage. We use thermochronology to estimate the timing of CO2 emplacement at Bravo Dome, a large natural CO2 field at a depth of 700 m in New Mexico. Together with estimates of the total mass loss from the field we present, to our knowledge, the first constraints on the magnitude, mechanisms, and rates of CO2 dissolution on millennial timescales. Apatite (U-Th)/He thermochronology records heating of the Bravo Dome reservoir due to the emplacement of hot volcanic gases 1.2–1.5 Ma. The CO2 accumulation is therefore significantly older than previous estimates of 10 ka, which demonstrates that safe long-term geological CO2 storage is possible. Integrating geophysical and geochemical data, we estimate that 1.3 Gt CO2 are currently stored at Bravo Dome, but that only 22% of the emplaced CO2 has dissolved into the brine over 1.2 My. Roughly 40% of the dissolution occurred during the emplacement. The CO2 dissolved after emplacement exceeds the amount expected from diffusion and provides field evidence for convective dissolution with a rate of 0.1 g/(m2y). The similarity between Bravo Dome and major US saline aquifers suggests that significant amounts of CO2 are likely to dissolve during injection at US storage sites, but that convective dissolution is unlikely to trap all injected CO2 on the 10-ky timescale typically considered for storage projects. PMID:25313084

Time-Lapse Electrical Geophysical Monitoring of Amendment-Based Biostimulation.

PubMed

Johnson, Timothy C; Versteeg, Roelof J; Day-Lewis, Frederick D; Major, William; Lane, John W

2015-01-01

Biostimulation is increasingly used to accelerate microbial remediation of recalcitrant groundwater contaminants. Effective application of biostimulation requires successful emplacement of amendment in the contaminant target zone. Verification of remediation performance requires postemplacement assessment and contaminant monitoring. Sampling-based approaches are expensive and provide low-density spatial and temporal information. Time-lapse electrical resistivity tomography (ERT) is an effective geophysical method for determining temporal changes in subsurface electrical conductivity. Because remedial amendments and biostimulation-related biogeochemical processes often change subsurface electrical conductivity, ERT can complement and enhance sampling-based approaches for assessing emplacement and monitoring biostimulation-based remediation. Field studies demonstrating the ability of time-lapse ERT to monitor amendment emplacement and behavior were performed during a biostimulation remediation effort conducted at the Department of Defense Reutilization and Marketing Office (DRMO) Yard, in Brandywine, Maryland, United States. Geochemical fluid sampling was used to calibrate a petrophysical relation in order to predict groundwater indicators of amendment distribution. The petrophysical relations were field validated by comparing predictions to sequestered fluid sample results, thus demonstrating the potential of electrical geophysics for quantitative assessment of amendment-related geochemical properties. Crosshole radar zero-offset profile and borehole geophysical logging were also performed to augment the data set and validate interpretation. In addition to delineating amendment transport in the first 10 months after emplacement, the time-lapse ERT results show later changes in bulk electrical properties interpreted as mineral precipitation. Results support the use of more cost-effective surface-based ERT in conjunction with limited field sampling to improve spatial and temporal monitoring of amendment emplacement and remediation performance. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

Temperature-package power correlations for open-mode geologic disposal concepts.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hardin, Ernest.

2013-02-01

Logistical simulation of spent nuclear fuel (SNF) management in the U.S. combines storage, transportation and disposal elements to evaluate schedule, cost and other resources needed for all major operations leading to final geologic disposal. Geologic repository reference options are associated with limits on waste package thermal power output at emplacement, in order to meet limits on peak temperature for certain key engineered and natural barriers. These package power limits are used in logistical simulation software such as CALVIN, as threshold requirements that must be met by means of decay storage or SNF blending in waste packages, before emplacement in amore » repository. Geologic repository reference options include enclosed modes developed for crystalline rock, clay or shale, and salt. In addition, a further need has been addressed for open modes in which SNF can be emplaced in a repository, then ventilated for decades or longer to remove heat, prior to permanent repository closure. For each open mode disposal concept there are specified durations for surface decay storage (prior to emplacement), repository ventilation, and repository closure operations. This study simulates those steps for several timing cases, and for SNF with three fuel-burnup characteristics, to develop package power limits at which waste packages can be emplaced without exceeding specified temperature limits many years later after permanent closure. The results are presented in the form of correlations that span a range of package power and peak postclosure temperature, for each open-mode disposal concept, and for each timing case. Given a particular temperature limit value, the corresponding package power limit for each case can be selected for use in CALVIN and similar tools.« less

Timing of mafic magmatism VS localization of the deformation: the Ivrea Zone (Italian Alps)

NASA Astrophysics Data System (ADS)

Bidault, M.; Geoffroy, L.; Arbaret, L.; Aubourg, C. T.

2017-12-01

Mafic magma emplacement is a common feature of continental extension systems, represented at initial stage by volcanic rifts and at more mature stage by volcanic passive margins. In those contexts, lithospheric extension is not isovolumic, magma being notably added to the crust while it is tectonically stretched and thinned. Crystal-scale power-law mechanisms responsible for the continuous flow of the lower crust during extension are composition- and temperature-dependent and additionally, very slow processes. However magma emplacement is a very rapid process. Its effect on the lower crust rheology is dual depending upon the time-scale of the processes: thermal weakening, when newly-formed hot intrusions emplace and heat their surrounding, and rheological chemical hardening when mafic intrusions are cold. Consequently, the localization and type of ductile deformation affecting the lower crust depend on the emplacement rate, volume and spatial organization of the mafic system. The Ivrea Zone is a well-known variscan continental crust section that underwent extension through first gravitational collapse in the Carboniferous and then lithospheric extension until the Permian. From the Late Carboniferous to the Permian, extension in the Ivrea Zone was associated with large volumes of magma intrusion within the lower crust. This volcanic rift stage predated the development of a non-volcanic passive margin during the Jurassic. The entire system was tilted 90° eastward during the Alpine orogeny but remained unaffected by significant metamorphism or pervasive strain. We combine new field observations, Anisotropy of Magnetic Susceptibility data and trace-element geochemistry to investigate the timing, tectonic-setting and consequences of magma emplacement in the in-extension Ivrea lower crust. We propose a new tectonic history, highlighting time-dependent strain transfer and localization in the lower crust, in connection with mafic magma intrusion.

The Jeffers Brook diorite-granodiorite pluton: style of emplacement and role of volatiles at various crustal levels in Avalonian appinites, Canadian Appalachians

NASA Astrophysics Data System (ADS)

Pe-Piper, Georgia; Piper, David J. W.

2018-04-01

Small appinite plutons ca. 610 Ma outcrop in the peri-Gondwanan Avalon terrane of northern Nova Scotia, with different structural levels exposed. Field mapping shows that the Jeffers Brook pluton is a laccolith emplaced along an upper crustal thrust zone, likely in a dilational jog in a regional dextral strike-slip system. The oldest rocks are probably mafic sills, which heated the area facilitating emplacement of intermediate magmas. Cross-cutting relationships show that both mafic and intermediate magmas were supplied throughout the history of pluton emplacement. The modal composition, mineral chemistry, and bulk chemistry of gabbro, diorite, tonalite, granodiorite, and granite have been studied in the main plutonic phases, dykes, and sills, and mafic microgranular enclaves. As with the type appinites in the Scottish Caledonides, the pluton shows evidence of high water content: the dominance of hornblende, locally within pegmatitic texture; vesicles and irregular felsic patches in enclaves; and late aplite dykes. Analyzed mafic microgranular enclaves are geochemically similar to larger diorite bodies in the pluton. Tonalite-granodiorite is distinct from the diorite in trace-element geochemistry and radiogenic isotopes. Elsewhere to the east, similar rocks of the same age form vertically sheeted complexes in major shear zones; hornblende chemistry shows that they were emplaced at a deeper upper crustal level. This implies that little of the observed geochemical variability in the Jeffers Brook pluton was developed within the pluton. The general requirements to form appinites are proposed to be small magma volumes of subduction-related magmas that reach the upper crust because of continual heating by mafic magmas moving through strike-slip fault pathways and trapping of aqueous fluids rather than venting through volcanic activity.

Internal fabrics in magmatic plutons emplaced in extended brittle crust - insight from analogue models with AMS (Anisotropy of Magnetic Susceptibility)

NASA Astrophysics Data System (ADS)

Mirzaei, Masoud; Zavada, Prokop; Machek, Matej; Roxerova, Zuzana

2016-04-01

Magma emplacement in extended brittle crust was simulated by injecting plaster of Paris (magma) into a large sandbox with central deformable rubber sheet. Analog magma is during the experiments injected through small circular inlet cut in the center of the elastic sheet. Injection force oscillation during the steadily evacuating analog magma was recorded during the experiments and regularly showed 3-4 increases followed by a quick drop. The recorded oscillation amplitude is largest for static injection without extension of the sandbox, which formed a columnar body with concentric and zonal internal fabric. Experiments including normal or oblique 20% extension resulted in along rift axis elongated oblate ellipsoidal pluton with rift parallel ridges in the top part of the pluton. Inspection of horizontal profiles show bone-shaped internal zoning patterns limited by conjugate sets of shear zones. Orientation of these internal shear zones is correlated with the sand-clock fault pattern developed in the overburden sand pack. Another set of shear zones parallel with the long axes of the plutons (rift axis) are associated with successive emplacement of distinct plaster pulses during the buildup of the entire body. The innermost lastly emplaced pulses of plaster display weak vertical magnetic fabrics with vertical lineations, while the outer shells of already emplaced plaster reveal stronger and margin parallel oblate magnetic fabrics with subhorizontal lineations. We interpret the vertical innermost fabrics as a result of active ascent of plaster from the injection inlet, while the fabrics in the outer zones likely reflect push due to inflation of the inner domain reflected in the reworking of the magnetic fabric.

Igneous Sheet Intrusions as a Record of Paleostress States

NASA Astrophysics Data System (ADS)

Stephens, T. L.; Walker, R. J.; Healy, D.; Bubeck, A.; England, R. W.; McCaffrey, K. J. W.

2017-12-01

The architecture of igneous sheet intrusion networks provides useful constraints on paleostress during emplacement. Several models for sill emplacement have used the close spatial relationships between sills and dikes in layered (sedimentary) host rocks to propose that dike-sill transitions are driven by layering. Such models require a stress rotation - from horizontal extension for dikes, to horizontal compression for sills - which is assumed to reflect a near-hydrostatic stress state, facilitating the dilation and intrusion of pre-existing structures (e.g. faults, joints, and bedding). Here, we present case examples of sills for which layering is not the main control on emplacement: Isle of Mull (UK), Faroe Islands (European Atlantic margin) and the San Rafael Subvolcanic Field (Utah, USA). In each case, dikes cut, or are cut by, sills; indicating that dikes were not the feeders to sills in the same section. The sills consist of linked, flat and shallowly-dipping segments that always show near-vertical opening directions. Sills cut bedding and formation contacts with consistent low-angle dips, and cut or abut against vertical faults, fractures, and tectonic foliations. From this, we infer that magma pressure during emplacement did not exceed the horizontal stress. To constrain the stress state during emplacement we present a novel approach that combines analysis of local and overall sill geometry data with mechanical models for slip tendency, dilation tendency, and fracture susceptibility. We also present a new depth-independent mechanical model, which estimates paleostress ratio and driving fluid pressure ratio using the opening angles of dilated fluid-filled fractures. Our results show that the studied sills record previously unrecognised local fluctuations in the far-field stress state, during magmatic supply. Sills, therefore, present an important tool for determining paleostress in areas where few brittle deformation structures (e.g. faults), other than intrusions, are present.

Emplacement of Basaltic Lava Flows: the Legacy of GPL Walker

NASA Astrophysics Data System (ADS)

Cashman, K. V.

2005-12-01

Through his early field measurements of lava flow morphology, G.P.L. Walker established a framework for examination of the dynamics of lava flow emplacement that is still in place today. I will examine this legacy as established by three early papers: (1) his 1967 paper, where he defined a relationship between the thickness of recent Etna lava flows and the slope over which they flowed, a relationship that he ascribed to lava viscosity; (2) his 1971 paper, which defined a relationship between lava flux and the formation of simple and compound flow units that he used to infer high effusion rates for the emplacement of some flood basalt lavas; and (3) his often-cited 1973 paper, which related the length of lava flows to their average effusion rate. These three papers, all similar in their basic approach of using field measurements of lava flow morphology to extract fundamental relationships between eruption conditions (magma flux and rheology) and emplacement style (flow length and thickness), firmly established the relationship between flow morphology and emplacement dynamics that has since been widely applied not only to subaerial lava flows, but also to the interpretation of flows in submarine and planetary environments. Important extensions of these concepts have been provided by improved field observation methods, particularly for analysis of flowing lava, by laboratory measurements of lava rheology, by the application of analog experiments to lava flow dynamics, and by steady improvement of numerical techniques to model the flow of lava over complex terrain. The real legacy of G.P.L. Walker's field measurement approach, however, may lie in the future, as new topographic measurement techniques such as LIDAR hold exciting promise for truly quantitative analysis of lava flow morphologies and their relationship to flow dynamics.

Emplacement of Volcanic Domes on Venus and Europa

NASA Technical Reports Server (NTRS)

Quick, Lynnae C.; Glaze, Lori S.; Baloga, Steve M.

2015-01-01

Placing firmer constraints on the emplacement timescales of visible volcanic features is essential to obtaining a better understanding of the resurfacing history of Venus. Fig. 1 shows a Magellan radar image and topography for a putative venusian lava dome. 175 such domes have been identified, having diameters that range from 19 - 94 km, and estimated thicknesses as great as 4 km [1-2]. These domes are thought to be volcanic in origin [3], having formed by the flow of a viscous fluid (i.e., lava) onto the surface. Among the unanswered questions surrounding the formation of Venus steep-sided domes are their emplacement duration, composition, and the rheology of the lava. Rheologically speaking, maintenance of extremely thick, 1-4 km flows necessitates higher viscosity lavas, while the domes' smooth upper surfaces imply the presence of lower viscosity lavas [2-3]. Further, numerous quantitative issues, such as the nature and duration of lava supply, how long the conduit remained open and capable of supplying lava, the volumetric flow rate, and the role of rigid crust in influencing flow and final morphology all have implications for subsurface magma ascent and local surface stress conditions. The surface of Jupiter's icy moon Europa exhibits many putative cryovolcanic constructs [5-7], and previous workers have suggested that domical positive relief features imaged by the Galileo spacecraft may be volcanic in origin [5,7-8] (Fig. 2). Though often smaller than Venus domes, if emplaced as a viscous fluid, formation mechanisms for europan domes may be similar to those of venusian domes [7]. Models for the emplacement of venusian lava domes (e.g. [9-10]) have been previously applied to the formation of putative cryolava domes on Europa [7].

Intraflow width variations in Martian and terrestrial lava flows

NASA Astrophysics Data System (ADS)

Peitersen, Matthew N.; Crown, David A.

1997-03-01

Flow morphology is used to interpret emplacement processes for lava flows on Earth and Mars. Accurate measurements of flow geometry are essential, particularly for planetary flows where neither compositional sampling nor direct observations of active flows may be possible. Width behavior may indicate a flow's response to topography, its emplacement regime, and its physical properties. Variations in width with downflow distance from the vent may therefore provide critical clues to flow emplacement processes. Flow width is also one of the few characteristics that can be readily measured from planetary mission data with accuracy. Recent analyses of individual flows at two terrestrial and four Martian sites show that widths within an individual flow vary by up to an order of magnitude. Width is generally thought to be correlated to topography; however, recent studies show that this relationship is neither straightforward nor easily quantifiable.

Documenting Chemical Assimilation in a Basaltic Lava Flow

NASA Technical Reports Server (NTRS)

Young, K. E.; Bleacher, J. E.; Needham, D. H.; Evans, C.; Whelley, P. L.; Scheidt, S.; Williams, D.; Rogers, A. D.; Glotch, T.

2017-01-01

Lava channels are features seen throughout the inner Solar System, including on Earth, the Moon, and Mars. Flow emplacement is therefore a crucial process in the shaping of planetary surfaces. Many studies have investigated the dynamics of lava flow emplacement, both on Earth and on the Moon [1,2,3] but none have focused on how the compositional and structural characteristics of the substrate over which a flow was emplaced influenced its final flow morphology. Within the length of one flow, it is common for flows to change in morphology, a quality linked to lava rheology (a function of multiple factors including viscosity, temperature, composition, etc.). The relationship between rheology and temperature has been well-studied [4,5,6] but less is understood about the relationship between a pre-flow terrain's chemistry and how the interaction between this flow and the new flow might affect lava rheology and therefore emplacement dynamics. Lava erosion. Through visual observations of active terrestrial flows, lava erosion has been well-documented [i.e. 7,8,9,10]. Lava erosion is the process by which flow composition is altered as the active lava melts and assimilates the pre-flow terrain over which it moves. Though this process has been observed, there is only one instance of where it was been geochemically documented.

Subsurface geology of a potential waste emplacement site, Salt Valley Anticline, Grand County, Utah

USGS Publications Warehouse

Hite, R.J.

1977-01-01

The Salt Valley anticline, which is located about 32 km northeast of Moab, Utah, is perhaps one of the most favorable waste emplacement sites in the Paradox basin. The site, which includes about 7.8 km 2, is highly accessible and is adjacent to a railroad. The anticline is one of a series of northwest-trending salt anticlines lying along the northeast edge of the Paradox basin. These anticlines are cored by evaporites of the Paradox Member of the Hermosa Formation of Middle Pennsylvanian age. The central core of the Salt Valley anticline forms a ridgelike mass of evaporites that has an estimated amplitude of 3,600 m. The evaporite core consists of about 87 percent halite rock, which includes some potash deposits; the remainder is black shale, silty dolomite, and anhydrite. The latter three lithologies are referred to as 'marker beds.' Using geophysical logs from drill holes on the anticline, it is possible to demonstrate that the marker beds are complexly folded and faulted. Available data concerning the geothermal gradient and heatflow at the site indicate that heat from emplaced wastes should be rapidly dissipated. Potentially exploitable resources of potash and petroleum are present at Salt Valley. Development of these resources may conflict with use of the site for waste emplacement.

The role of the geothermal gradient in the emplacement and replenishment of ground ice on Mars

NASA Technical Reports Server (NTRS)

Clifford, Stephen M.

1993-01-01

Knowledge of the mechanisms by which ground ice is emplaced, removed, and potentially replenished, are critical to understanding the climatic and hydrologic behavior of water on Mars, as well as the morphologic evolution of its surface. Because of the strong temperature dependence of the saturated vapor pressure of H2O, the atmospheric emplacement or replenishment of ground ice is prohibited below the depth at which crustal temperatures begin to monotonically increase due to geothermal heating. In contrast, the emplacement and replenishment of ground ice from reservoirs of H2O residing deep within the crust can occur by at least three different thermally-driven processes, involving all three phases of water. In this regard, Clifford has discussed how the presence of a geothermal gradient as small as 15 K/km can give rise to a corresponding vapor pressure gradient sufficient to drive the vertical transport of 1 km of water from a reservoir of ground water at depth to the base of the cryosphere every 10(exp 6) - 10(exp 7) years. This abstract expands on this earlier treatment by considering the influence of thermal gradients on the transport of H2O at temperatures below the freezing point.

A new model for the emplacement of Columbia River basalts as large, inflated pahoehoe lava flow fields

USGS Publications Warehouse

Self, S.; Thordarson, Th.; Keszthelyi, L.; Walker, G.P.L.; Hon, K.; Murphy, M.T.; Long, P.; Finnemore, S.

1996-01-01

Extensive flows of the Columbia River Basalt (CRB) Group in Washington, Oregon, and Idaho are dominantly inflated compound pahoehoe sheet lavas. Early studies recognized that CRB lavas are compound pahoehoe flows, with textures suggesting low flow velocities, but it was thought that the great thickness and extent of the major flows required very rapid emplacement as turbulent floods of lava over a period of days or weeks. However, small volume ( < 1 km3) compound pahoehoe flows on Kilauea, Hawai'i, demonstrate that such flows can thicken by at least an order of magnitude through gradual inflation and the same mechanism has been proposed for larger (10-20 km3) pahoehoe flows in Iceland. The vertical distribution of vesicles and other morphologic features within CRB lava flows indicate that they grew similarly by inflation. Small pahoehoe lobes at the base and top of many CRB pahoehoe lava flows indicate emplacement in a gradual, piecemeal manner rather than as a single flood. We propose that each thick CRB sheet flow was active for months to years and that each group of flows produced by a single eruption (a flow field) was emplaced slowly over many years. Copyright 1996 by the American Geophysical Union.

Lunar base habitat designs: Characterizing the environment, and selecting habitat designs for future trade-offs

NASA Technical Reports Server (NTRS)

Ganapathi, Gani B.; Ferrall, Joseph; Seshan, P. K.

1993-01-01

A survey of distinct conceptual lunar habitat designs covering the pre- and post-Apollo era is presented. The impact of the significant lunar environmental challenges such as temperature, atmosphere, radiation, soil properties, meteorites, and seismic activity on the habitat design parameters are outlined. Over twenty habitat designs were identified and classified according to mission type, crew size; total duration of stay, modularity, environmental protection measures, and emplacement. Simple selection criteria of (1) post-Apollo design, (2) uniqueness of the habitat design, (3) level of thoroughness in design layout, (4) habitat dimensions are provided, and (5) materials of construction for the habitat shell are specified, are used to select five habitats for future trade studies. Habitat emplacement scenarios are created to examine the possible impact of emplacement of the habitat in different locations, such as lunar poles vs. equatorial, above ground vs. below ground, etc.

Shapes of Venusian 'pancake' domes imply episodic emplacement and silicic composition

NASA Technical Reports Server (NTRS)

Fink, Jonathan H.; Bridges, Nathan T.; Grimm, Robert E.

1993-01-01

The main evidence available for constraining the composition of the large circular 'pancake' domes on Venus is their gross morphology. Laboratory simulations using polyethylene glycol show that the height to diameter (aspect) ratios of domes of a given total volume depend critically on whether their extrusion was continuous or episodic, with more episodes leading to greater cooling and taller domes. Thus without observations of their emplacement, the compositions of Venusian domes cannot be uniquely constrained by their morphology. However, by considering a population of 51 Venusian domes to represent a sampling of many stages during the growth of domes with comparable histories, and by plotting aspect ratio versus total volume, we find that the shapes of the domes are most consistent with episodic emplacement. On Earth this mode of dome growth is found almost exclusively in lavas of dacite to rhyolite composition, strengthening earlier inferences about the presence of evolved magmas on Venus.

Constraining dike emplacement conditions from virtual outcrop modelling

NASA Astrophysics Data System (ADS)

Jørgen Kjøll, Hans; Andersen, Torgeir; Tegner, Christian

2017-04-01

In the Late Neoproterozoic, the paleocontinents of Baltica and Laurentia rifted apart and sea-floor spreading into the Ordovician formed the Iapetus Ocean. The Iapetus later closed and the two continents collided forming the Caledonian orogen. Rocks related to the break-up and subsequent opening of the Iapetus, now reside as partly well-preserved tectonic lenses in thrust nappes within the Scandinavian Caledonides. The break-up architecture can be separated in two distinct domains, one hyperextended magma-poor segment in the SW, and one magma-rich part that comprise the Baltoscandian Dike Swarm (BDS), the main subject of this study. The magma-rich segment is exposed from c. Røros in the south, through Sweden and into Northern Norway, a distance of more than 900 kilometers. The magmatism of the BDS has been dated to c. 580-610 Ma and is now interpreted to represent a break-up related large igneous province (LIP). The BDS is generally well exposed in freshly glaciated outcrops and mountain cliffs. It intrudes proximal to distal marine, argillaceous, meta-sandstones and carbonates that locally display well-preserved extensional features, such as normal faults at both high and low angle. Partial melting of host rocks is observed at several localities, indicating relatively high temperatures during dike emplacement. Temperature estimates by previous workers indicate high-T (850°C) conditions during the break-up from the northernmost part of the dike swarm. Emplacement depths have not yet been accurately constrained, although some anomalous high pressure for an extensional environment (≈9Kbar) is indicated in the Corrovarre area. The spectacular exposure of the dike swarm provides the opportunity to evaluate the conditions during emplacement from dike geometries and morphologies. The several hundred meters high vertical cliff walls give excellent opportunities to assess the dike geometries over a range of host lithologies and across several km of stratigraphy (up to 3 km) in the, now tilted, cross-sections. The outcrops and mountain cliffs have been thoroughly photographed using a UAV and helicopter. 3-dimensional digital outcrop models have been prepared and interpreted together with outcrop observations. The new data give new insight into dike emplacement mechanisms, which in turn provide better constraints for the ambient conditions during emplacement of the dikes. Our regional observations support previous interpretations, that the BDS represented the distal parts of a magma-rich passive margin and the ocean-continent transition. Such tectonic domains are rarely exposed and available for direct observation and the study area in the North Scandinavian Caledonides, therefore represents a unique opportunity to better constrain the conditions during continental break-up as well as the infra-crustal dike emplacement mechanisms at divergent plate margins.

Similarities in basalt and rhyolite lava flow emplacement processes

NASA Astrophysics Data System (ADS)

Magnall, Nathan; James, Mike; Tuffen, Hugh; Vye-Brown, Charlotte

2016-04-01

Here we use field observations of rhyolite and basalt lava flows to show similarities in flow processes that span compositionally diverse lava flows. The eruption, and subsequent emplacement, of rhyolite lava flows is currently poorly understood due to the infrequency with which rhyolite eruptions occur. In contrast, the emplacement of basaltic lava flows are much better understood due to very frequent eruptions at locations such as Mt Etna and Hawaii. The 2011-2012 eruption of Cordón Caulle in Chile enabled the first scientific observations of the emplacement of an extensive rhyolite lava flow. The 30 to 100 m thick flow infilled a topographic depression with a negligible slope angle (0 - 7°). The flow split into two main channels; the southern flow advanced 4 km while the northern flow advanced 3 km before stalling. Once the flow stalled the channels inflated and secondary flows or breakouts formed from the flow front and margins. This cooling rather than volume-limited flow behaviour is common in basaltic lava flows but had never been observed in rhyolite lava flows. We draw on fieldwork conducted at Cordón Caulle and at Mt Etna to compare the emplacement of rhyolite and basaltic flows. The fieldwork identified emplacement features that are present in both lavas, such as inflation, breakouts from the flow font and margins, and squeeze-ups on the flow surfaces. In the case of Cordón Caulle, upon extrusion of a breakout it inflates due to a combination of continued lava supply and vesicle growth. This growth leads to fracturing and breakup of the breakout surface, and in some cases a large central fracture tens of metres deep forms. In contrast, breakouts from basaltic lava flows have a greater range of morphologies depending on the properties of the material in the flows core. In the case of Mt Etna, a range of breakout morphologies are observed including: toothpaste breakouts, flows topped with bladed lava as well as breakouts of pahoehoe or a'a lava. This range in breakout morphologies is in stark contrast to breakouts observed at Cordón Caulle. We also compare the cooled crusts that form on the surface of the flows; in basalts this is of order tens of centimetres thick, in rhyolite flows the crust is of order several metres thick (based on field observations and theoretical values). This surface crust may control the flow advance in the latter phases of the flow evolution, causing stalling of the flow front and subsequent breakout formation. The similarities in flow features between compositional end members hints at a more universal model for lava flow emplacement.

Geometry and controls on the development of igneous sill-related forced folds: 2D seismic reflection case study from offshore Southern Australia

NASA Astrophysics Data System (ADS)

Jackson, Christopher; Schofield, Nick; Magee, Craig; Golenkov, Bogdan

2017-04-01

Emplacement of magma in the shallow subsurface can result in the development of dome-shaped folds at the Earth's surface. These so-called 'forced folds' have been described in the field and in subsurface datasets, although the exact geometry of the folds and the nature of their relationship to underlying sills remains unclear and, in some cases, controversial. As a result, the utility of these features in tracking the subsurface movement of magma, and predicting the potential size and location of potentially hazardous volcanic eruptions, is uncertain. Here we use high-quality, 2D seismic reflection and borehole data from the Ceduna sub-basin, offshore southern Australia to describe the structure and infer the evolution of igneous sill-related forced folds in the Bight Basin Igneous Complex (BBIC). We mapped 33 igneous sills, which were emplaced 200-1500 m below the palaeo-seabed in an Upper Cretaceous, coal-bearing, predominantly coastal-plain succession. The intrusions, which are expressed as packages of high-amplitude reflections, are 32-250 m thick and 7-19 km in diameter. They are overlain by dome-shaped folds, which are up to 17 km wide and display up to 210 m of relief. The edges of these folds coincide with the margins of the underlying sills and the folds display the greatest relief where the underlying sills are thickest; the folds are therefore interpreted as forced folds that formed in response to emplacement of magma in the shallow subsurface. The folds are onlapped by Lutetian (middle Eocene) strata, indicating they formed and the intrusions were emplaced during the latest Ypresian (c. 48 Ma). We demonstrate that fold amplitude is typically less than sill thickness even for sills with very large diameter-to-depth ratios, suggesting that pure elastic bending (forced folding) of the overburden is not the only process accommodating magma emplacement, and that supra-sill compaction may be important even at relatively shallow depths. Based on the observation that the sills intruded a shallowly-buried succession, the discrepancy between fold amplitude and sill thickness may reflect loss of host rock volume by fluidisation and pore fluid expulsion from poorly-lithified, water-rich beds. This study indicates that host rock composition, emplacement depth and deformation mechanisms are important controls on the style of deformation that occurs during intrusive igneous activity, and that forced fold amplitude may not always reflect the thickness of an underlying igneous intrusion. In addition, the results of this study suggest that physical and numerical models need to model more complex host rock stratigraphies and rheologies if they wish to capture the full range of deformation mechanisms that occur during magma emplacement in the Earth's shallow subsurface.

Deformation mechanisms accommodating the emplacement of an igneous sill-complex in the Irish sector of the Rockall Basin, offshore NW Ireland

NASA Astrophysics Data System (ADS)

Magee, Craig; Jackson, Christopher; Schofield, Nick

2013-04-01

Magma intrusion within the subsurface is heavily influenced by the pre-existing architecture of the upper crust and, depending on the emplacement mechanisms, may modify basin structure and fluid flow pathways. Seismic reflection data reveal that intrusive networks predominantly consist of interconnected, saucer-shaped sills that are often associated with dome-shaped 'forced' folds generated by intrusion-induced uplift. Previous studies of intrusion-related forced folds have primarily focused on isolated sills or laccoliths and have shown that the fold amplitude is less than the intrusion thickness, suggesting that additional space-making mechanisms (e.g. grain comminution, fluidization) accompanied emplacement. Furthermore, forced folding is often considered as an instantaneous process over geological time. However, fold growth and the interplay between accompanying ductile and brittle deformation styles remains poorly understood. Here, we use 3D seismic reflection data from the eastern margin of the Irish Rockall Basin, NE Atlantic, to quantitatively study eighty-two igneous intrusions (i.e. saucer-shaped sills and inclined sheets) in order to constrain the emplacement history of a Palaeocene-to-Middle Eocene sill-complex. Emplacement occurred across a Cretaceous clastic-to-marl dominated succession at palaeodepths of <5 km. Northwards-dipping, planar transgressive sheet intrusions are most abundant in the deeper portion of the sill-complex and magma flow indicators within them (i.e. steps and broken bridges) reveal that magma flowed upwards and outwards, feeding into shallow-level saucer-shaped sills at the peak of the transgressive limbs. The saucer-shaped sills are characterized by radial magma flow patterns, emanating from the inner sill, distinguished by mapping the long axes of magma lobes and fingers. These magma flow indictors also provide a proxy for intrusion style; i.e. where sills intrude the Lower Cretaceous sandstones, magma propagation was facilitated by brittle fracturing while non-brittle processes (e.g. fluidization) accompanied shallow-level intrusions into the Upper Cretaceous marls. Directly overlying the sill-complex, within the Palaeocene-Mid-Eocene succession, are a series of 22 forced folds that are interpreted to have formed via intrusion-induced uplift. Onlap and truncational relationships observed throughout the folded Palaeocene-Mid-Eocene strata indicate that the folds grew progressively, likely due to the near-continuous intrusion of small magmatic pulses within the sill-complex. Importantly, individual forced folds cannot be attributed to a single intrusion and, instead, appear to have been generated from the incremental emplacement of adjacent and overlapping sills. Furthermore, where the sills are clustered, individual folds have merged together to form broad, compound folds. We show that emplacement depth below the contemporaneous seabed and vertical stacking of the sills strongly influenced forced fold development. Furthermore, magmatic activity occurred for a prolonged (~8 Ma) time period.

The Wall-Rock Record of Incremental Emplacement in the Little Cottonwood-Alta Magmatic and Hydrothermal System, Wasatch Mountains, Utah, U.S.A.

NASA Astrophysics Data System (ADS)

Stearns, M.; Callis, S.; Beno, C.; Bowman, J. R.; Bartley, J. M.

2017-12-01

Contact aureoles record the cumulative effects on wall rocks of magma emplacement. Like the plutons they surround, contact aureoles have long been regarded to form geologically instantaneously. Protracted incremental emplacement of plutons must be reconciled with the wall-rock record of heat and mass transfer. Fundamental questions include how heat and material move from intrusions into their aureoles and how long that process takes. The Little Cottonwood stock is surrounded by a 2 km-wide contact aureole that contains prograde AFM mineral assemblages in the pelitic layers of the Proterozoic Big Cottonwood Formation. The Alta stock is surrounded by a well characterized 1 km-wide contact aureole containing both prograde AFM and CMS mineral assemblages in Ophir Shale and Mississippian dolostones, respectively. Understanding the petrogenesis of these aureoles requires the timing of magmatism and wall-rock metamorphism to be independently determined. Preliminary petrochronology (U/Th-Pb dates and trace element concentrations collected by LASS-ICP-MS) from the inner aureoles of both intrusions establishes a protracted history of monazite (re)crystallization from 35-25 Ma in the Little Cottonwood aureole and 35 Ma in the Alta aureole. Little Cottonwood aureole monazites are characterized by a positive age correlation with heavy rare earth elements (HREE) and a negative correlation with Eu/Eu*. Alta aureole monazites have a similar range of the HREE concentrations and Eu/Eu* variation. Zircon growth interpreted to record emplacement-level magmatic crystallization of the western Little Cottonwood stock ranges from 33-28 Ma near the contact. Multi-grain U-Pb zircon TIMS dates from the Alta stock range from 35-33 Ma and are interpreted to suggest the full range of emplacement-level magmatism in the Alta stock. Additionally, in situ U-Pb titanite dates from the Alta stock record intermittent high temperature hydrothermal activity in the stock margin from 35-24 Ma. These new data suggest that the Little Cottonwood aureole developed over several million years and overlapped in time with hydrothermal (re)crystallization of titanite within the Alta Stock. Both systems continued to develop after monazite (re)crystallization within Ophir Shale, which was concurrent with emplacement of the Alta Stock.

Lunar mare deposits associated with the Orientale impact basin: New insights into mineralogy, history, mode of emplacement, and relation to Orientale Basin evolution from Moon Mineralogy Mapper (M3) data from Chandrayaan-1

USGS Publications Warehouse

Whitten, J.; Head, J.W.; Staid, M.; Pieters, C.M.; Mustard, J.; Clark, R.; Nettles, J.; Klima, R.L.; Taylor, L.

2011-01-01

Moon Mineralogy Mapper (M3) image and spectral reflectance data are combined to analyze mare basalt units in and adjacent to the Orientale multiring impact basin. Models are assessed for the relationships between basin formation and mare basalt emplacement. Mare basalt emplacement on the western nearside limb began prior to the Orientale event as evidenced by the presence of cryptomaria. The earliest post-Orientale-event mare basalt emplacement occurred in the center of the basin (Mare Orientale) and postdated the formation of the Orientale Basin by about 60-100 Ma. Over the next several hundred million years, basalt patches were emplaced first along the base of the Outer Rook ring (Lacus Veris) and then along the base of the Cordillera ring (Lacus Autumni), with some overlap in ages. The latest basalt patches are as young as some of the youngest basalt deposits on the lunar nearside. M3 data show several previously undetected mare patches on the southwestern margins of the basin interior. Regardless, the previously documented increase in mare abundance from the southwest toward the northeast is still prominent. We attribute this to crustal and lithospheric trends moving from the farside to the nearside, with correspondingly shallower density and thermal barriers to basaltic magma ascent and eruption toward the nearside. The wide range of model ages for Orientale mare deposits (3.70-1.66 Ga) mirrors the range of nearside mare ages, indicating that the small amount of mare fill in Orientale is not due to early cessation of mare emplacement but rather to limited volumes of extrusion for each phase during the entire period of nearside mare basalt volcanism. This suggests that nearside and farside source regions may be similar but that other factors, such as thermal and crustal thickness barriers to magma ascent and eruption, may be determining the abundance of surface deposits on the limbs and farside. The sequence, timing, and elevation of mare basalt deposits suggest that regional basin-related stresses exerted control on their distribution. Our analysis clearly shows that Orientale serves as an excellent example of the early stages of the filling of impact basins with mare basalt. Copyright ?? 2011 by the American Geophysical Union.

40Ar/39Ar geochronology of hypabyssal igneous rocks in the Maranon Basin of Peru - A record of thermal history, structure, and alteration

USGS Publications Warehouse

Prueher, L.M.; Erlich, R.; Snee, L.W.

2005-01-01

Hypabyssal andesites and dacites from the Balsapuerto Dome in the Mara?on Basin of Peru record the thermal, tectonic, and alteration history of the area. The Mara?on Basin is one of 19 sub-Andean foreland basins. The hypabyssal rocks in the Balsapuerto Dome are one of four known occurrences of subvolcanic rocks along the deformation front in Peru. This dome is a potential petroleum structural trap. Petroleum seeps near the dome indicate that a source for the petroleum is present, but the extent and amount of petroleum development is unknown. The Balsapuerto hypabyssal rocks are plagioclase-, hornblende-, pyroxene-phyric andesites to dacites. Some parts of the dome are pervasively altered to a hydrothermal assemblage of quartz-sericite-pyrite. 40Ar/39Ar geochronology shows that thermal activity related to emplacement of these subvolcanic rocks took place between 12-10 Ma, subsequent to the major periods of Andean folding and faulting, previously assumed to have occurred about 9 Ma. Eleven argon mineral age-spectrum analyses were completed. Argon apparent ages on amphibole range from 12.7 to 11.6 Ma, and the age spectra are simple, which indicates that the ages are very close to emplacement ages. Potassium feldspar yields an argon age spectrum ranging in age from 12.5 to 11.4 Ma, reflecting the period during which the potassium feldspar closed to argon diffusion between the temperature range of 350?C to about 150?C; thus the potassium feldspar age spectrum reflects a cooling profile throughout this temperature range. This age range is consistent with ages of emplacement for the entire igneous complex indicating that an increased thermal state existed in the area for at least 1.0 m.y. Combined with the coexisting hornblende age, this rock cooled from ~580?C to ~150?C in ~1.2 m.y. resulting in an average cooling rate of 358?C /m.y. White mica, or sericite, formed as a later alteration phase associated with quartz- sericite- pyrite and propylitic alteration in some samples. Three age-spectrum analyses on white mica indicate that alteration occurred at 12.5 Ma and again at 11 Ma, and suggest that alteration fluids were present throughout the range of emplacement and as long as 0.5 m.y. afterward. Based on these data, emplacement of the intrusive body(ies) began at about 12.7 Ma. The hornblende age range can be interpreted to reflect multiple periods of intrusion from 12.7 to 11.6 Ma or a period of thermal activity and high-temperature cooling during this age range. The potassium feldspar cooling age range supports either interpretation. The white mica ages indicate that at least two periods of hydrothermal activity occurred at 12.5 and 11.0 Ma, throughout the period of emplacement and cooling of the intrusive body below about 150?C. The magmatic and hydrothermal systems were active after the intrusion, with temperatures not reaching 150?C until about 1 m.y. after emplacement. Therefore, the thermal effects associated with emplacement of the intrusion and the associated hydrothermal system were probably high enough to destroy petroleum in the host and source rocks. Thus, the Balsapuerto Dome is not a viable source of petroleum. There is no evidence in the rock samples or thin sections for brittle or ductile deformation suggesting that this body was emplaced in its present location after cessation of Andean thrusting. Andean thrusting had been assumed to end about 9 Ma. However, this new data suggested that the Andean thrusting had ceased by about 12-10 Ma.

90. View of scanner building no. 104 showing emplacement process ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

90. View of scanner building no. 104 showing emplacement process for one-half of upper radar switch housing body. RCA Services Company 6 September, 1960, official photograph BMEWS Project by unknown photograph, Photographic Services, Riverton, NJ, BMEWS, clear as negative no. a-1163. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK

Solar energy emplacement developer

NASA Technical Reports Server (NTRS)

Mortensen, Michael; Sauls, Bob

1991-01-01

A preliminary design was developed for a Lunar Power System (LPS) composed of photovoltaic arrays and microwave reflectors fabricated from lunar materials. The LPS will collect solar energy on the surface of the Moon, transform it into microwave energy, and beam it back to Earth where it will be converted into usable energy. The Solar Energy Emplacement Developer (SEED) proposed will use a similar sort of solar energy collection and dispersement to power the systems that will construct the LPS.

Army Engineer Divers: First In Port-Au-Prince Harbor

DTIC Science & Technology

2010-12-01

to the pile once the concrete was poured. This step was com- pleted in a few minutes for each pile. Last, a prefabricated wooden form was emplaced...September-December 201010 Engineer This prefabricated wooden form was emplaced around a rebar cage at the top of damaged piles to hold concrete until it...the mainland into the harbor. Waste from tugboats and sewage from the mainland compounded ecological hazards. The only alternative for the Army and

Pluton emplacement within an extensional transfer zone during dextral strike-slip faulting: an example from the late Archaean Abitibi Greenstone Belt

NASA Astrophysics Data System (ADS)

Lacroix, S.; Sawyer, E. W.; Chown, E. H.

1998-01-01

The Lake Abitibi area within the late Archaean Abitibi Greenstone Belt exhibits an interlinked plutonic, structural and metamorphic evolution that may characterize segmented strike-slip faults at upper-to-mid-crustal levels. Along the major, southeastward propagating Macamic D2 dextral strike-slip fault, Theological and preexisting D1 structural heterogeneities induced the development of NNW-trending dextral-oblique splays which evolved into an extensional trailing fan and created an extensional, NNW-dipping stepover. Magma flowing upwards from deeper parts of the Macamic Fault spread towards the southeast at upper crustal levels along both the oblique-slip and extensional D2 splays, and built several plutons in a pull-apart domain between 2696 and 2690 Ma. Different emplacement and material transfer mechanisms operated simultaneously in different parts of the system, including fault dilation and wedging, lateral expansion, wall-rock ductile flow and stoping. Transfer of movement between D2 splays occurred under ductile conditions during syn-emplacement, amphibolite-grade metamorphism (500-700 °C). During cooling (< 2690 Ma), narrower brittle-ductile zones of greenschist-grade shearing were concentrated along the pluton-wall rock contacts, but the extensional stepover locked since both normal and reverse movements occurred along NNW-dipping faults. Pluton emplacement, contact metamorphism and propagation of D2 faults appear to have been closely linked during the Superior Province-wide late transpressional event.

The Dynamics of Rapidly Emplaced Terrestrial Lava Flows and Implications for Planetary Volcanism

NASA Technical Reports Server (NTRS)

Baloga, Stephen; Spudis, Paul D.; Guest, John E.

1995-01-01

The Kaupulehu 1800-1801 lava flow of Hualalai volcano and the 1823 Keaiwa flow from the Great Crack of the Kilauea southwest rift zone had certain unusual and possibly unique properties for terrestrial basaltic lava flows. Both flows apparently had very low viscosities, high effusion rates, and uncommonly rapid rates of advance. Ultramafic xenolith nodules in the 1801 flow form stacks of cobbles with lava rinds of only millimeter thicknesses. The velocity of the lava stream in the 1801 flow was extremely high, at least 10 m/s (more than 40 km/h). Observations and geological evidence suggest similarly high velocities for the 1823 flow. The unusual eruption conditions that produced these lava flows suggest a floodlike mode of emplacement unlike that of most other present-day flows. Although considerable effort has gone into understanding the viscous fluid dynamics and thermal processes that often occur in basaltic flows, the unusual conditions prevalent for the Kaupulehu and Keaiwa flows necessitate different modeling considerations. We propose an elementary flood model for this type of lava emplacement and show that it produces consistent agreement with the overall dimensions of the flow, channel sizes, and other supporting field evidence. The reconstructed dynamics of these rapidly emplaced terrestrial lava flows provide significant insights about the nature of these eruptions and their analogs in planetary volcanism.

Paleomagnetic evidence for high-temperature emplacement of the 1883 subaqueous pyroclastic flows from Krakatau Volcano, Indonesia

NASA Astrophysics Data System (ADS)

Mandeville, Charles W.; Carey, Steven; Sigurdsson, Haraldur; King, John

1994-05-01

The paroxysmal 1883 eruption of Krakatau volcano in Indonesia discharge at least 6.5 cu km (dense rock equivalent) of pyroclastic material into the shallow waters of the Sunda Straits within a 15-km radius of the volcano. Progressive thermal demagnetization studies of individually oriented pumice clasts from a core sample of the submarine pyroclastic deposits show that 41 out of 47 clasts exhibit single-component remanence with mean inclination of -24 deg. The partial thermoremanent magnetization components of both pumice and lithic clasts are well grouped in orientation, indicating that substantial cooling of clasts must have occurred following deposition. Estimated subaqueous emplacement temperature for such clasts is greater than 500 C. Rare two-component lithic fragments exhibit inflection points on vector endpoint diagrams that mark the temperature below which the fragments acquired magnetization of similar orientation. These inflection points range from 350 to 550 C, indicating a minimum subaqueous emplacement temperature of 350 C. Paleomagnetic evidence for high-emplacement temperature supports the hypothesis that proximal 1883 submarine pyroclastic deposits resulted from entrance of hot, subaerially generated pyroclastic flows into the sea. Similar deposits have been interpreted from the geologic record, but this is the first documented example of submarine pyroclastic flows from a historic eruption. The Kratatau deposits thus serve as an important modern analog for the study of pyroclastic flow/seawater interactions.

Field Detection of Chemical Assimilation in A Basaltic Lava Flow

NASA Technical Reports Server (NTRS)

Young, K. E.; Bleacher, J. E.; Needham, D. H.; Evans, C. A.; Whelley, P. L.; Scheidt, S. P.; Williams, D. A.; Rogers, A. D.; Glotch, T.

2017-01-01

Lava channels are features seen throughout the inner Solar System, including on Earth, the Moon, and Mars. Flow emplacement is therefore a crucial process in the shaping of planetary surfaces. Many studies, including some completed by members of this team at the December 1974 lava flow, have investigated the dynamics of lava flow emplacement, both on Earth and on the Moon and how pre-flow terrain can impact final channel morphology, but far fewer have focused on how the compositional characteristics of the substrate over which a flow was em-placed influenced its final flow morphology. Within the length of one flow, it is common for flows to change in morphology, a quality linked to rheology (a function of multiple factors including viscosi-ty, temperature, composition, etc.). The relationship between rheology and temperature has been well-studied but less is known about the relationship between an older flow's chemistry and how the interaction between this flow and the new flow might affect lava rheology and therefore emplacement dynamics. Lava erosion. Through visual observations of active terrestrial flows, mechanical erosion by flowing lava has been well-documented. Lava erosion by which flow composition is altered as the active lava melts and assimilates the pre-flow terrain over which it moves is also hypothesized to affect channel formation. However, there is only one previous field study that geochemically documents the process in recent basaltic flow systems.

Cryovolcanic emplacement of domes on Europa

NASA Astrophysics Data System (ADS)

Quick, Lynnae C.; Glaze, Lori S.; Baloga, Stephen M.

2017-03-01

Here we explore the hypothesis that certain domes on Europa may have been produced by the extrusion of viscous cryolavas. A new mathematical method for the emplacement and relaxation of viscous lava domes is presented and applied to putative cryovolcanic domes on Europa. A similarity solution approach is applied to the governing equation for fluid flow in a cylindrical geometry, and dome relaxation is explored assuming a volume of cryolava has been rapidly emplaced onto the surface. Nonphysical singularities inherent in previous models for dome relaxation have been eliminated, and cryolava cooling is represented by a time-variable viscosity. We find that at the onset of relaxation, bulk kinematic viscosities may lie in the range between 103 and 106 m2/s, while the actual fluid lava viscosity may be much lower. Plausible relaxation times to form the domes, which are linked to bulk cryolava rheology, are found to range from 3.6 days to 7.5 years. We find that cooling of the cryolava, while dominated by conduction through an icy skin, should not prevent fluids from advancing and relaxing to form domes within the timescales considered. Determining the range of emplacement conditions for putative cryolava domes will shed light on Europa's resurfacing history. In addition, the rheologies and compositions of erupted cryolavas have implications for subsurface cryomagma ascent and local surface stress conditions on Europa.

Jurassic magmatism in Dronning Maud Land: synthesis of results of the MAMOG project

USGS Publications Warehouse

Leat, P.T.; Curtis, M.L.; Riley, T.R.; Ferraccioli, F.

2007-01-01

The Jurassic Karoo large igneous province (LIP) of Antarctica, and its conjugate margin in southern Africa, is critical for investigating important questions about the relationship of basaltic LIPs to mantle plumes. Detailed aerogeophysical, structural, anisotropy of magnetic susceptibility (AMS), geochronological and geochemical investigations completed under the British Antarctic Survey’s MAMOG project have provided some of the answers. Across most of the area, magma volumes were small compared to those in southern Africa. Jurassic dikes intruding the Archean craton are sparse and the Jutulstraumen trough, a Jurassic rift, is interpreted, from aerogeophysical data, as largely amagmatic. The largest volumes of magma were emplaced along the margin of the craton and close to the Africa-Antarctica rift. Although dikes were emplaced by both vertical and horizontal flow, overwhelmingly magmas in Dronning Maud Land were locally derived, and not emplaced laterally from distant sources. Basaltic magmatism was protracted in Dronning Maud Land (several dike emplacement episodes between ~206 and 175 Ma), and the small magma volumes resulted in highly diverse magma compositions, including picrites and ferropicrites interpreted to have been derived from hot mantle in a mantle plume. The protracted magmatism before the locally ~177 Ma flood lava eruptions, and evidence for a radiating dike swarm, favor a model of mantle plume incubation for 20-30 million years before flood lava eruption.

Superhot fluids circulating close to magma intrusions: a contribution from analogue modelling

NASA Astrophysics Data System (ADS)

Montanari, Domenico; Agostini, Andrea; Bonini, Marco; Corti, Giacomo

2017-04-01

Magma overpressure at the time of the emplacement at shallow crustal levels may lead to deformation (i.e. forced folding, fracturing and faulting) in the country rock, both at local and regional scale. To get insights into this process, we reproduced and analysed in the laboratory the fracture/fault network associated with the emplacement of magma at shallow crustal levels. We used a mixture of quartz sand and K-feldspar fine sand as an analogue for the brittle crust, and polyglycerols for the magma. The models were able to reproduce complex 3D architectures of deformation resulting from magma emplacement, with different deformation patterns -invariably dominated by forced folding and associated brittle faulting/fracturing- resulting from variable parameters. These results provide useful hints into geothermal researches. Fractures and faults associated with magma emplacement are indeed expected to significantly influence the distribution and migration of superhot geothermal fluids near the edge of the magma intrusion. These structures can therefore be considered as potential targets for geothermal or mineral deposits exploration. In this perspective, the results of analogue models may provide useful geometric and conceptual constraints for field work, numerical modeling, and particularly seismic interpretation for achieving a better understanding and tuning of the integrated conceptual model concerning the circulation of supercritical fluids. The research leading to these results has received funding from the European Community's Seventh Framework Programme under grant agreement No. 608553 (Project IMAGE).

Cryovolcanic Emplacement of Domes on Europa

NASA Technical Reports Server (NTRS)

Quick, Lynnae C.; Glaze, Lori S.; Baloga, Stephen M.

2016-01-01

Here we explore the hypothesis that certain domes on Europa may have been produced by the extrusion of viscous cryolavas. A new mathematical method for the emplacement and relaxation of viscous lava domes is presented and applied to putative cryovolcanic domes on Europa. A similarity solution approach is applied to the governing equation for fluid flow in a cylindrical geometry, and dome relaxation is explored assuming a volume of cryolava has been rapidly emplaced onto the surface. Nonphysical sin- gularities inherent in previous models for dome relaxation have been eliminated, and cryolava cooling is represented by a time-variable viscosity. We find that at the onset of relaxation, bulk kinematic viscosities may lie in the range between 10(exp 3) and 10(exp 6) sq m/s, while the actual fluid lava viscosity may be much lower. Plausible relaxation times to form the domes, which are linked to bulk cryolava rheology, are found to range from 3.6 days to 7.5 years. We find that cooling of the cryolava, while dominated by conduction through an icy skin, should not prevent fluids from advancing and relaxing to form domes within the timescales considered. Determining the range of emplacement conditions for putative cryolava domes will shed light on Europa's resurfacing history. In addition, the rheologies and compositions of erupted cryolavas have implications for subsurface cryomagma ascent and local surface stress conditions on Europa.

Emplacement dynamics and lava field evolution of the flood basalt eruption at Holuhraun, Iceland: Observations from field and remote sensing data

NASA Astrophysics Data System (ADS)

Pedersen, Gro; Höskuldsson, Armann; Riishuus, Morten S.; Jónsdóttir, Ingibjörg; Thórdarson, Thorvaldur; Dürig, Tobias; Gudmundsson, Magnus T.; Durmont, Stephanie

2016-04-01

The Holuhraun eruption (Aug 2014- Feb 2015) is the largest effusive eruption in Iceland since the Laki eruption in 1783-84, with an estimated lava volume of ~1.6 km3 covering an area of ~83 km2. The eruption provides an unprecedented opportunity to study i) lava morphologies and their emplacement styles, ii) Morphological transitions iii) the transition from open to closed lava pathways and iv) the implication of lava pond formation. This study is based on three different categories of data; field data, airborne data and satellite data. The field data include tracking of the lava advancement by Global Positioning System (GPS) measurements and georeferenced GoPro cameras allowing classification of the lava margin morphology. Furthermore, video footage on-site documented lava emplacement. Complimentary observations have been provided from aircraft platforms and by satellite data. Of particular importance for lava morphology observations are 1-12 m/pixel airborne Synthetic Aperture Radar (SAR) images (x-band), as well as SAR data from TerraSAR-X and COSMO-SkyMed satellites. The Holuhraun lava field comprises a continuum of morphologies from pāhoehoe to 'a'ā, which have varied temporally and spatially. Shelly pāhoehoe lava was the first morphology to be observed (08-29). Spatially, this lava type was not widely distributed, but was emplaced throughout the eruption close to the vent area and the lava channels. Slabby pāhoehoe lava was initially observed the 08-31 and was observed throughout most of the eruption during the high-lava-flux phase of new lava lobe emplacement. 'A'ā lavas were the dominating morphology the first three months of the eruption and was first observed 09-01 like Rubbly pāhoehoe lava. Finally, Spiny pāhoehoe lava was first observed the 09-05 as a few marginal outbreaks along the fairly inactive parts of the 'a'ā lava lobe. However, throughout the eruption this morphology became more important and from mid-November/beginning of December the spiny pāhoehoe was the main type of lava emplacement. The morphological transitions observed in the field has been summarized in a transformation cycle, where the main cycle revolve from 'a'ā to rubbly and slabby pāhoehoe lava morphologies. As these morphologies come to rest, outbreaks of degassed, cooler and more viscous lava would form irregular spiny lobes. A continued low discharge, high viscosity lava supply to these lobes would result in inflation and new break outs of spiny pahoehoe lobes that eventually would create a compound lava field. Overall, the Holuhraun lava field evolution has been divided into three main phases. Phase 1, which was dominated by open lava channels, and horizontal stacking of 1 km sized 'a'ā branches (31 Augusut to mid-October). Phase 2 was dominated by lava pond formation east of the vent area and became the dominant distributary center for lava emplacement during this period (Mid-October to December). Finally, in phase 3, closed lava pathways, inflation and vertical stacking became increasingly important, dominating type of lava emplacement in the end of the eruption (December to 27th February).

Analysis of inflated submarine and sub-lacustrine Pahoehoe lava flows using high-resolution bathymetric and lidar data (Invited)

NASA Astrophysics Data System (ADS)

Deschamps, A.; Van Vliet-Lanoe, B.; Soule, S. A.; Allemand, P.; Le Saout, M.; Delacourt, C.

2013-12-01

The summit of the East Pacific Rise (EPR), 16°N, is investigated based -among others- on high-resolution bathymetry acquired using the AUV Aster-X, and photos and videos collected using the submersible Nautile (Ifremer). HR bathymetry reveals submarine tumuli and inflated smooth lava flows at the summit of the ridge, emplaced on sub-horizontal terrains. They are primarily composed of jumbled and lobate flows with occurrences of sheet flows, and pillows close to the flow margins. They are 5 to 15 meters -high, and their surface ranges 0.2 to 1.5 km2. Their surface is either planar or depressed, likely due to lava topographic downdraining during eruption. At their margins, planar slabs of lava, few meters wide, slope down from the top of the flow, at angles ranging 40 to 80°. A series of cracks, 0,5 to 1.5 m deep, separate the horizontal surface of the flow from their inclined flanks. These cracks parallel the sinuous edges of the flows, suggesting the flow flanks tilted outward. Tumuli are also observed. Some of these smooth flows form 80 to 750 m -long sinuous ridges, suggesting the existence of lava tubes. Their morphology indicates that these flows experienced inflationary emplacement styles, but at a much larger scale than Pahoehoe lavas in Hawaii and La Réunion Islands. In these two islands, indeed, inflation structures are typically less than 2 meters high and only several tens of meters in length at maximum, suggesting that their mechanism of emplacement and inflation is significantly different. Conversely, we observe comparable inflation flows in Iceland and in Idaho and Oregon, also emplaced onto sub-horizontal terrains. We use high-resolution aerial photographs and lidar data to investigate their morphology. In the Eastern Snake River Plain (ESRP), quaternary basaltic plains volcanism produced monogenetic coalescent shields, and phreatomagmatic basaltic eruptions that are directly related to proximity of magmatism to the Snake River or Pleistocene lakes. For example, the Hells Half Acres Holocene lava flows, Idaho, display similar morphology as EPR flows, with sheet lavas, flow lobes 5-8 m high and approximately 100 m wide, and pressure ridges. Similar flows are observed in the ESRP: Craters of the Moon, Wapi, and Cerro Grande lava flows for example. In Oregon, Potholes, Devils Garden, Diamond Craters, Deschute River, Owyhee River, Jordan Crater flows are also strictly comparable. In Iceland, Lake Mytvan lava flows, for example, were emplaced in sublacustrine environments, and Budahraun flows in Snaefellness were emplaced at the coast below the sea level. The common point of these presently "aerial" lava flow is their emplacement in lakes, paleo-lakes and river beds, thus in "wet" environment, often controlled by rivers and their tributaries. A more efficient cooling of the lava lobes in wet environment probably triggers the development of strong and plastic margins due to cooling, which resists continued movement of the flow, whereas a thinner margin developing in aerial environment may favor lobe break out when internal pressure rises above the tensile strength of the crust. We propose a theoretical model for these lava flow emplacement on sub-horizontal basement.

The relationship between magnetic anisotropy, rock-strength anisotropy and vein emplacement in gold-bearing metabasalts of Gadag (South India)

NASA Astrophysics Data System (ADS)

Vishnu, C. S.; Lahiri, Sivaji; Mamtani, Manish A.

2018-01-01

In this study the importance of rock strength and its anisotropy in controlling vein emplacement is evaluated by integrating anisotropy of magnetic susceptibility (AMS) with rock mechanics data from massive (visibly isotropic) metabasalts of Gadag region (Dharwar Craton, South India). Orientation of magnetic foliation (MF) is first recognized from AMS. Subsequently, rock mechanics tests viz. ultrasonic P-wave velocity (Vp), uniaxial compressive strength (UCS) and point load strength (Is(50)) are done in cores extracted parallel and perpendicular to MF. Vp is found to be higher in direction parallel to MF than perpendicular to it. In contrast rock strength (UCS and Is(50)) is greater in direction perpendicular to MF, than parallel to it. This proves that rocks from the gold mineralized belt of Gadag have rock strength anisotropy. Orientation of MF in Gadag region is NW-SE, which is also the mean orientation of quartz veins. Previous studies indicate that emplacement of veins in the region took place during regional D3 (NW-SE shortening). Based on the present study, it is concluded that vein emplacement took place in NW-SE orientation because the rocks have strength anisotropy and are weaker in this direction (orientation of MF), which dilated to accommodate fluid flow. In addition, vein intensities are measured along three traverses and found to be variable. It is argued that since mineralization is favoured when the system gets saturated with fluid, variation in fluid flow could not have been responsible for variation in vein intensities in the study area. Since the rock strength of the different blocks investigated here is not uniform, it is envisaged that variation in rock strength played an important role in controlling the vein intensities. It is concluded that rock strength variation controlled strain partitioning and channelized fluid flow thus influencing vein emplacement and mineralization and formation of lodes.

New field evidence for the emplacement of the Ronda peridotite

NASA Astrophysics Data System (ADS)

Bessière, Eloïse; Romagny, Adrien; Jolivet, Laurent; Augier, Romain; Savastano, Lucia

2017-04-01

The Betic-Rif orogen forms the westernmost part of the Alpine orogenic system and results from the closure of the Tethys Ocean between Africa and the Iberian Peninsula. Subduction and crustal thickening leading to the formation of high-pressure and low-temperature (HP/LT) metamorphic complexes were followed by a late-orogenic extension stage in an overall convergent setting. Plate kinematic reconstructions indeed reveal a continuous convergence between Africa and Eurasia from Late Cretaceous times currently characterized by slow convergence rates that add in complex ways with body forces stored during crustal thickening stages and subsequently released during crustal thinning. If this large-scale scenario is now broadly admitted, some first order questions remain opened. Among these questions, the timing and kinematics of the emplacement of the Ronda or Beni Bousera peridotite massifs remain particularly unclear. Due to the numerous published early Miocene ages, the emplacement of the Ronda or the Beni Bousera massifs is classically considered a very fast event before the high-temperature event. In this scenario, peridotite bodies are emplaced by overthrusting onto the continental crust within a compressional context. Based on new detailed field observations along the contact between the Ronda peridotites and the high-temperature continental basement and high-temperature marbles of the Dorsale Unit, as well as a metamorphic petrology approach, we reconsider this interpretation. We argue that this contact could instead be an early detachment, possibly active during the Mesozoic or before. A few old ages found in the western part of the chain could indeed be linked with such an episode of extreme thinning. This event is consistent with the opening of the Tethyan Ocean and associated with oceanization in the eastern part of the chain. In this work, we will argue for an emplacement as old as the Triassic, at least, thus much older than the Miocene thrusting event. This study is part of the Orogen Project, an academic-industrial collaboration between CNRS, BRGM and Total.

Dating kimberlite emplacement with zircon and perovskite (U-Th)/He geochronology

NASA Astrophysics Data System (ADS)

Stanley, Jessica; Flowers, Rebecca

2017-04-01

Kimberlites provide rich information about the composition and evolution of cratonic lithosphere. They can entrain xenoliths and xenocrysts from the entire lithospheric column as they transit rapidly to the surface, providing information on the state of the deep lithosphere as well as any sedimentary units covering the craton at the time of eruption. Accurate geochronology of these eruptions is key for interpreting this information and discerning spatiotemporal trends in lithospheric evolution, but kimberlites can sometimes be difficult to date with available methods. Here we explore whether (U-Th)/He dating of zircon and perovskite can serve as reliable techniques for determining kimberlite emplacement ages by dating a suite of sixteen southern African kimberlites by zircon and/or perovskite (U-Th)/He (ZHe, PHe). Most samples with abundant zircon yielded ZHe dates reproducible to ≤15% dispersion that are in good agreement with published eruption ages, though there were several samples that were more scattered. Since the majority of dated zircon were xenocrystic, zircon with reproducible dates were fully reset during eruption or resided at temperatures above the ZHe closure temperature ( 180 °C) prior to entrainment in the kimberlite magma. We attribute scattered ZHe dates to shallowly sourced zircon that underwent incomplete damage annealing and/or partial He loss during the eruptive process. All seven kimberlites dated with PHe yielded dates reproducible to ≤15% dispersion and reasonable results. As perovskite has not previously been used as a (U-Th)/He chronometer, we conducted two preliminary perovskite 4He diffusion experiments to obtain initial estimates of its temperature sensitivity. These experiments suggest a PHe closure temperature of >300 °C. Perovskite in kimberlites is unlikely to be xenocrystic and its relatively high temperature sensitivity suggests that PHe dates will typically record emplacement rather than post-emplacement processes. ZHe and PHe geochronology can effectively date kimberlite emplacement and provide useful complements to existing techniques.

Dome Structures Above Sills and Saucer-Shaped Sills: Insights From Experimental Modeling

NASA Astrophysics Data System (ADS)

Planke, S.; Galland, O.; Malthe-Sørenssen, A.

2007-12-01

Saucer-shaped magma and sand intrusions are common features in sedimentary basins. They result from fundamental processes for the emplacement of fluids in shallow sedimentary basins. Seismic data show that the overburden above saucer-shaped intrusions is usually deformed and exhibits a dome-like structure. The formation of such structures, and the associated deformation, are of primary importance in the evolution of petroleum systems. In this presentation, we report on experimental investigation of the deformation processes associated with the intrusion of saucer-shaped intrusions into sedimentary basins. The experimental setup consists of molten low-viscosity oil injected into fine-grained silica flour (see Galland et al., this session). It properly simulates the emplacement of saucer-shaped intrusions and the deformation of the country rock. During experiments, the surface of the model is digitalized through a structured light technique based on moiré projection principle. Such a tool provides topographic maps of the model and allows a periodic (every 1.5 s) monitoring of the model surface. When the model magma starts intruding, a symetrical dome rises above the inlet. As injection proceeds, the dome inflates and widens. Subsequently, the dome evolves to a plateau-like feature, with nearly flat surface and steep edges. The plateau keeps lifting up, but nearly stoppes widening. At the end of the experiments, the intruding liquid erupts at the edge of the plateau. The intrusion formed in the experiment is a typical saucer-shaped sill. The evolution of the deforming surface reflects the evolution of the intrusion. We infer that the first doming phase corresponds to the emplacement of a horizontal basal sill by open fracturing. The dome-to-plateau transition corresponds to a transition of the liquid emplacement mechanism from basal sill to inclined sheet. We suggest that the emplacement of the inclined sheets results from shear fracturing at the dome edge.

Ductile to Brittle Shear Localization in the Upper Crust During Thermal Anomaly: the Calamita Complex (Elba Island, Italy)

NASA Astrophysics Data System (ADS)

Papeschi, S.

2016-12-01

A field and microstructural study of contemporaneous pluton-related thermal anomaly and thrust faulting highlights the mutual interaction between active regional tectonics, magma emplacement and contact metamorphism. The Calamita Complex is composed of highly strained HT/LP schists, metarenites and metacarbonates. HT metamorphism was caused by the emplacement of the buried Porto Azzurro intrusion occurred at pressures below 0.2 GPa. Thermal anomaly was associated to top-to-NE shearing that produced multiple mylonitic shear zones, a HT/LP W-dipping foliation and E-W trending lineations. Strain markers provided by metaconglomerates suggest that deformation occurred in a constrictional regime, independent from the geometry of the magmatic system. Pluton emplacement and shearing were not caused by each other but they interacted producing an entirely new fabric that transposed the previous regional features. Deformation outlasted cooling causing the progressive localization of shearing along a main cataclastic zone localized at the contact between mylonitic metacarbonates and schists. The interaction between shearing and the emplacement of late leucogranitic sills caused also the development of mylonitic to cataclastic fabrics within the sills, depending on temperature and strain rate at the time of emplacement. At the microscale synkinematic blastesis of andalusite plus cordierite and the progressive switch from GBM- to SGR- to BLG- microstructures of quartz, locally overprinted by cataclastic fabrics. The analysis of microstructures suggest that in the Calamita Complex regional deformation affected the host rocks and the late magmatic products of the pluton that registered the switch from ductile to brittle conditions. This switch was generally due to the progressive cooling of the system; however multiple microstructures suggest that deformation in the Calamita was heterogeneous in time and space and possibly subject to different strain rates in different portions that may have produced coeval ductile and brittle deformation.

Eocene-Miocene igneous activity in Provence (SE France): 40Ar/39Ar data, geochemical-petrological constraints and geodynamic implications

NASA Astrophysics Data System (ADS)

Lustrino, Michele; Fedele, Lorenzo; Agostini, Samuele; Di Vincenzo, Gianfranco; Morra, Vincenzo

2017-09-01

Provence (SE France) was affected by two main phases of sporadic igneous activity during the Cenozoic. New 40Ar/39Ar laser step-heating data constrain the beginning of the oldest phase to late Eocene (40.82 ± 0.73 Ma), with activity present until early Miocene ( 20 Ma). The products are mainly andesites, microdiorites, dacites and basaltic andesites mostly emplaced in the Agay-Estérel area. Major- and trace-element constraints, together with Srsbnd Ndsbnd Pb isotopic ratios suggest derivation from a sub-continental lithosphere mantle source variably modified by subduction-related metasomatic processes. The compositions of these rocks overlap those of nearly coeval (emplaced 38-15 Ma) late Eocene-middle Miocene magmatism of Sardinia. The genesis of dacitic rocks cannot be accounted for by simple fractional crystallization alone, and may require interaction of evolved melts with lower crustal lithologies. The youngest phase of igneous activity comprises basaltic volcanic rocks with mildly sodic alkaline affinity emplaced in the Toulon area 10 Myr after the end of the previous subduction-related phase. These rocks show geochemical and isotopic characteristics akin to magmas emplaced in intraplate tectonic settings, indicating a sub-lithospheric HiMu + EM-II mantle source for the magmas, melting approximately in the spinel/garnet-lherzolite transition zone. New 40Ar/39Ar laser step-heating ages place the beginning of the volcanic activity in the late Miocene-Pliocene (5.57 ± 0.09 Ma). The emplacement of "anorogenic" igneous rocks a few Myr after rocks of orogenic character is a common feature in the Cenozoic districts of the Central-Western Mediterranean area. The origin of such "anorogenic" rocks can be explained with the activation of different mantle sources not directly modified by subduction-related metasomatic processes, possibly located in the sub-lithospheric mantle, and thus unrelated to the shallower lithospheric mantle source of the "orogenic" magmatism.

Using InSAR for Characterizing Pyroclastic Flow Deposits at Augustine Volcano Across Two Eruptive Cycles

NASA Astrophysics Data System (ADS)

McAlpin, D. B.; Meyer, F. J.; Lu, Z.; Beget, J. E.

2014-12-01

Augustine Island is a small, 8x11 km island in South Central Alaska's lower Cook Inlet. It is approximately 280 km southwest of Anchorage, and occupied entirely by its namesake Augustine Volcano. At Augustine Volcano, SAR data suitable for interferometry is available from 1992 to 2005, from March 2006 to April 2007, and from July 2007 to October 2010. Its last two eruptive episodes, in 1986 and 2006, resulted in substantial pyroclastic flow deposits (PFDs) on the Volcano's north flank. Earlier InSAR analyses of the area, from 1992-1999, identified local subsidence, but no volcano-wide deformation indicative of magma-chamber evacuation. In contrast to previous studies, we use InSAR data to determine a range of geophysical parameters for PFDs emplaced during the Augustine's two most recent eruption cycles. Based on InSAR measurements between 1992 and 2010, we reconstruct the deformation behavior of PFDs emplaced during Augustine's last two eruption cycles. Using a combination of InSAR measurements and modeling, we determine the thickness and long-term deformation of overlaying pyroclastic flow deposits emplaced in 1986 and 2006. Consistent with previous observations of pyroclastic flows, we found that the PFDs on Augustine Island rapidly subsided after emplacement due to an initial compaction of the material. We determined the length of this initial settling period and measured the compaction rate. Subsequent to this initial rapid subsidence, we found that PFD deformation slowed to a more persistent, linear, long-term rate, related to cooling of the deposits. We established that the deposits' contraction rate is linearly related to their thickness and measured the contraction rate. Finally, a study of long term coherence properties of the Augustine PFDs showed remarkable stability of the surface over long time periods. This information provides clues on the structural properties and composition of the emplaced material.

Fake ballistics and real explosions: field-scale experiments on the ejection and emplacement of volcanic bombs during vent-clearing explosive activity

NASA Astrophysics Data System (ADS)

Taddeucci, J.; Valentine, G.; Gaudin, D.; Graettinger, A. H.; Lube, G.; Kueppers, U.; Sonder, I.; White, J. D.; Ross, P.; Bowman, D. C.

2013-12-01

Ballistics - bomb-sized pyroclasts that travel from volcanic source to final emplacement position along ballistic trajectories - represent a prime source of volcanic hazard, but their emplacement range, size, and density is useful to inverse model key eruption parameters related to their initial ejection velocity. Models and theory, however, have so far focused on the trajectory of ballistics after leaving the vent, neglecting the complex dynamics of their initial acceleration phase in the vent/conduit. Here, we use field-scale buried explosion experiments to study the ground-to-ground ballistic emplacement of particles through their entire acceleration-deceleration cycle. Twelve blasts were performed at the University at Buffalo Large Scale Experimental Facility with a range of scaled depths (burial depth divided by the cubic root of the energy of the explosive charge) and crater configurations. In all runs, ballistic analogs were placed on the ground surface at variable distance from the vertical projection of the buried charge, resulting in variable ejection angle. The chosen analogs are tennis and ping-pong balls filled with different materials, covering a limited range of sizes and densities. The analogs are tracked in multiple high-speed and high-definition videos, while Particle Image Velocimetry is used to detail ground motion in response to the buried blasts. In addition, after each blast the emplacement position of all analog ballistics was mapped with respect to the blast location. Preliminary results show the acceleration history of ballistics to be quite variable, from very short and relatively simple acceleration coupled with ground motion, to more complex, multi-stage accelerations possibly affected not only by the initial ground motion but also by variable coupling with the gas-particle mixture generated by the blasts. Further analysis of the experimental results is expected to provide new interpretative tools for ballistic deposits and better hazard assessment, with particular emphasis for the case of vent-opening eruptions driven by explosive gas expansion beneath loose debris.

Constraints on the magnitude and rate of CO 2 dissolution at Bravo Dome natural gas field

DOE PAGES

Sathaye, Kiran J.; Hesse, Marc A.; Cassidy, M.; ...

2014-10-13

The injection of carbon dioxide (CO 2) captured at large point sources into deep saline aquifers can significantly reduce anthropogenic CO 2 emissions from fossil fuels. Dissolution of the injected CO 2 into the formation brine is a trapping mechanism that helps to ensure the long-term security of geological CO 2 storage. We use thermochronology to estimate the timing of CO 2 emplacement at Bravo Dome, a large natural CO 2 field at a depth of 700 m in New Mexico. Together with estimates of the total mass loss from the field we present, to our knowledge, the first constraintsmore » on the magnitude, mechanisms, and rates of CO 2 dissolution on millennial timescales. Apatite (U-Th)/He thermochronology records heating of the Bravo Dome reservoir due to the emplacement of hot volcanic gases 1.2–1.5 Ma. The CO 2 accumulation is therefore significantly older than previous estimates of 10 ka, which demonstrates that safe long-term geological CO 2 storage is possible. Here, integrating geophysical and geochemical data, we estimate that 1.3 Gt CO 2 are currently stored at Bravo Dome, but that only 22% of the emplaced CO 2 has dissolved into the brine over 1.2 My. Roughly 40% of the dissolution occurred during the emplacement. The CO 2 dissolved after emplacement exceeds the amount expected from diffusion and provides field evidence for convective dissolution with a rate of 0.1 g/(m 2y). Finally, the similarity between Bravo Dome and major US saline aquifers suggests that significant amounts of CO 2 are likely to dissolve during injection at US storage sites, but that convective dissolution is unlikely to trap all injected CO 2 on the 10-ky timescale typically considered for storage projects.« less

Holuhraun 2014-2015 Eruption Site on Iceland: A Flood Lava Analogue for Mars

NASA Astrophysics Data System (ADS)

Voigt, J.; Hamilton, C. W.; Scheidt, S. P.; Bonnefoy, L. E.; Jónsdóttir, I.; Höskuldsson, A.; Thordarson, T.

2017-09-01

The Holuhraun eruption 2014-2015 is the largest flood lava flow in Iceland since the Laki eruption in 1783-1784. We here present the first facies map of the whole Holuhraun lava flow, which we linked to the chronological emplacement history. Furthermore the facies we identify at Holuhraun are common on the Martian surface, especially at Marte Vallis and Rahway Valles. It therefore provides unique insights into the emplacement of flood lavas on Earth and other planetary bodies.

Preliminary post-emplacement safety analysis of the subseabed disposal of high-level nuclear waste

NASA Astrophysics Data System (ADS)

Kaplan, M. F.; Koplik, C. M.; Klett, R. D.

1984-09-01

The radiological hazard from the disposal of high-level nuclear waste within the deep ocean sediments is evaluated, on a preliminary basis, for locations in the central North Pacific and in the northwestern Atlantic. Radio-nuclide transport in the sediment and water column and by marine organisms is considered. Peak doses to an individual are approximately five orders of magnitude below background levels for both sites. Sensitivity analyses for most aspects of the post-emplacement systems models are included.

The Antiaircraft Journal. Volume 93, Number 6, November-December 1950

DTIC Science & Technology

1950-12-01

some reference to "in ground de - tating effects of both the "air and automatic artillery." fense roles command rests with so-and-so." In Korea no one...Battalion, were contacted with their units in air de - fense roles in critical areas. 111eir main difficulty was in displacing forward at the rate...is a most effective means of de - stroying emplaced or masked weapons. However, emplace- ments hidden from the air prove devastating to advancing

Radioisotope Thermoelectric Generators Emplaced in the Deep Ocean, Recover or Dispose in Situ

DTIC Science & Technology

1986-03-01

00 0 M! Technical Report 1106 Cll ) March 1986 Radioisotope Thermoelectric 00 Generators Emplaced in the Deep Ocean Recover or Dispose In Situ? 00...PROGRAM ELEMENT NO PROJECT NO8 TASK NO WORK UN IT NO NAV’COMPT 141 N� A8 WR00026 I I TITLE i,cmvd. Secunty CIaxssIoe,o’,) Radioisotope Thermoelectric ...disposal alternatives. . RTG DESCRIPTIONS Each RTG consists of a strontium-90 titanate heat source, thermoelectric generator, thermal insulation

Geochronology of the proterozoic basement of southwesternmost North America, and the origin and evolution of the Mojave crustal province

USGS Publications Warehouse

Barth, Andrew P.; Wooden, Joseph L.; Coleman, Drew S.; Fanning, C. Mark

2000-01-01

The Proterozoic Baldwin gneiss in the central Transverse Ranges of southern California, a part of the Mojave crustal province, is composed of quartzofeldspathic gneiss and schist, augen and granitic gneiss, trondhjemite gneiss, and minor quartzite, amphibolite, metagabbro, and metapyroxenite. Sensitive high resolution ion microprobe (SHRIMP) data indicate that augen and granitic gneisses comprise a magmatic arc intrusive suite emplaced between 1783 ± 12 and 1675 ± 19 Ma, adjacent to or through thinned Archean crust. High U/Th rims on zircons in most samples suggest an early metamorphic event at ∼1741 Ma, but peak amphibolite facies metamorphism and penetrative, west vergent deformation occurred after 1675 Ma. The Baldwin gneiss is part of a regional allochthon emplaced by west vergent deformation over a Proterozoic shelf-slope sequence (Joshua Tree terrane). We hypothesize that emplacement of this regional allochthon occurred during a late Early or Middle Proterozoic arc-continent collision along the western margin of Laurentia.

U-Pb zircon geochronology and evolution of some Adirondack meta-igneous rocks

NASA Technical Reports Server (NTRS)

Mclelland, J. M.

1988-01-01

An update was presented of the recent U-Pb isotope geochronology and models for evolution of some of the meta-igneous rocks of the Adirondacks, New York. Uranium-lead zircon data from charnockites and mangerites and on baddeleyite from anorthosite suggest that the emplacement of these rocks into a stable crust took place in the range 1160 to 1130 Ma. Granulite facies metamorphism was approximately 1050 Ma as indicated by metamorphic zircon and sphene ages of the anorthosite and by development of magmatitic alaskitic gneiss. The concentric isotherms that are observed in this area are due to later doming. However, an older contact metamorphic aureole associated with anorthosite intrusion is observed where wollastonite develops in metacarbonates. Zenoliths found in the anorthosite indicate a metamorphic event prior to anorthosite emplacement. The most probable mechanism for anorthosite genesis is thought to be ponding of gabbroic magmas at the Moho. The emplacement of the anorogenic anorthosite-mangerite-charnockite suite was apparently bracketed by compressional orogenies.

Process of breaking and rendering permeable a subterranean rock mass

DOEpatents

Lekas, Mitchell A.

1980-01-01

The process of the present invention involves the following steps: producing, as by hydrofracing, a substantially horizontal fracture in the subterranean rock mass to be processed; emplacing an explosive charge in the mass in spaced juxtaposed position to the fracture; enlarging the fracture to create a void space thereat, an initial lifting of the overburden, and to provide a free face juxtaposed to and arranged to cooperate with the emplaced explosive charge; and exploding the charge against the free face for fragmenting the rock and to distribute the space, thus providing fractured, pervious, rubble-ized rock in an enclosed subterranean chamber. Firing of the charge provides a further lifting of the overburden, an enlargement of the chamber and a larger void space to distribute throughout the rubble-ized rock within the chamber. In some forms of the invention an explosive charge is used to produce a transitory enlargement of the fracture, and the juxtaposed emplaced charge is fired during the critical period of enlargement of the fracture.

A Self-Replication Model for Long Channelized Lava Flows on the Mars Plains

NASA Technical Reports Server (NTRS)

Baloga, S. M.; Glaze, L. S.

2008-01-01

A model is presented for channelized lava flows emplaced by a self-replicating, levee-building process over long distances on the plains of Mars. Such flows may exhibit morphologic evidence of stagnation, overspills, and upstream breakouts. However, these processes do not inhibit the formation and persistence of a prominent central channel that can often be traced for more than 100 km. The two central assumptions of the self-replication model are (1) the flow advances at the average upstream velocity of the molten core and (2) the fraction of the lava that travels faster than the average upstream velocity forms stationary margins in the advancing distal zone to preserve the self-replication process. For an exemplary 300 km long flow north of Pavonis Mons, the model indicates that 8 m of crust must have formed during emplacement, as determined from the channel and levee dimensions. When combined with independent thermal dynamic estimates for the crustal growth rate, relatively narrow constraints are obtained for the flow rate (2250 m3 s 1), emplacement duration (600 d), and the lava viscosity of the molten interior (106 Pa s). Minor, transient overspills and breakouts increase the emplacement time by only a factor of 2. The primary difference between the prodigious channelized Martian flows and their smaller terrestrial counterparts is that high volumetric flow rates must have persisted for many hundreds of days on Mars, in contrast to a few hours or days on Earth.

CONCEPTUAL DESIGN OF A LUNAR REGOLITH CLUSTERED-REACTOR SYSTEM

DOE Office of Scientific and Technical Information (OSTI.GOV)

John Darrell Bess

2009-06-01

It is proposed that a fast-fission, heatpipe-cooled, lunar-surface power reactor system be divided into subcritical units that could be launched safely without the incorporation of additional spectral shift absorbers or other complex means of control. The reactor subunits are to be emplaced directly into the lunar regolith utilizing the regolith not just for shielding but as the reflector material to increase the neutron economy of the system. While a single subunit cannot achieve criticality by itself, coordinated placement of additional subunits will provide a critical reactor system for lunar surface power generation. A lunar regolith clustered-reactor system promotes reliability, safety,more » and ease of manufacture and testing at the cost of a slight increase in launch mass per rated power level and an overall reduction in neutron economy when compared to a single-reactor system. Additional subunits may be launched with future missions to increase the cluster size and power according to desired lunar base power demand and lifetime. The results address the potential uncertainties associated with the lunar regolith material and emplacement of the subunit systems. Physical distance between subunits within the clustered emplacement exhibits the most significant feedback regarding changes in overall system reactivity. Narrow, deep holes will be the most effective in reducing axial neutron leakage from the core. The variation in iron concentration in the lunar regolith can directly influence the overall system reactivity although its effects are less than the more dominant factors of subunit emplacement.« less

Paleomagnetism in the Determination of the Emplacement Temperature of Cerro Colorado Tuff Cone, El Pinacate Volcanic Field, Sonora, Mexico.

NASA Astrophysics Data System (ADS)

Rodriguez Trejo, A.; Alva-Valdivia, L. M.; Vidal Solano, J. R.; Garcia Amador, B.; Gonzalez-Rangel, J. A.

2014-12-01

Cerro Colorado Maar is located at the World Heritage Site, biosphere reserve El Pinacate and Gran Desierto del Altar, at the NNW region of Sonora, Mexico (in El Pinacate Volcanic Field). It is a tuff cone, about 1 km diameter, result of several phreatomagmatic episodes during the late Quaternary. We report paleomagnetic and rock magnetic properties from fusiform volcanic bombs obtained from the borders of Cerro Colorado. This study is based in the thermoremanent magnetization TRM normally acquired by volcanic rocks, which can be used to estimate the emplacement temperature range. We performed the experiments on 20 lithic fragments (10 cm to 20 cm approximately), taking 6-8 paleomagnetic cores from each. Rock magnetic experiments (magnetic susceptibility vs. temperature (k-T), hysteresis curves and FORC analysis, shows that the main magnetic mineral carriers of magnetization are titanomagnetite and titanohematite in different levels of intergrowth. The k-T curves suggest in many cases, only one magnetic phase, but also in other cases a second magnetic phase. Thermal demagnetization was used to demagnetize the specimens in detailed short steps and make a well-defined emplacement temperature determination ranges. We found that temperature emplacement determination range for these two magnetic phases is between 350-450 °C, and 550-580 °C, respectively. These results are consistent with those expected in an eruption of Surtsey type, showing a distinct volcanic activity compared to the other craters from El Pinacate volcanic field.

Emplacement, rapid burial, and exhumation of 90-Ma plutons in southeastern Alaska

USGS Publications Warehouse

Himmelberg, G.R.; Haeussler, Peter J.; Brew, D.A.

2004-01-01

In southeastern Alaska, granodiorite-tonalite plutons of the Admiralty-Revillagigedo belt intruded the Jurassic-Cretaceous Gravina belt along the eastern side of the Alexander terrane around 90 Ma. These plutons postdate some deformation related to a major contractional event between the previously amalgamated Wrangellia and Alexander terranes and the previously accreted terranes of the North American margin. We studied the aureole mineral assemblages of these plutons near Petersburg, Alaska, determined pressure and temperature of equilibration, and examined structures that developed within and adjacent to these plutons. Parallelism of magmatic and submagmatic fabrics with fabrics in the country rock indicates synchroneity of pluton emplacement with regional deformation and suggests that magma transport to higher crustal levels was assisted by regional deformation. Replacement of andalusite by kyanite or sillimanite indicates crustal thickening soon after pluton emplacement. Regional structural analysis indicates the crustal thickening was accomplished by thrust burial. Thermobarometric analyses indicate the aureoles reached near-peak temperatures of 525 to 635 ??C at pressures of 570 to 630 MPa. Consideration of the rate of thermal decay of the aureoles suggests that burial was rapid and occurred at rates around 5 to 8 mm/year. Structural observations indicate there was contractional deformation before, during, and after emplacement of the 90-Ma plutons. Initial exhumation of the Admiralty-Revillagedo belt in the Petersburg area may have occurred along a thrust west of the pluton belt within the Gravina belt. ?? 2004 NRC Canada.

Tracking lava flow emplacement on the east rift zone of Kilauea, Hawai’i with synthetic aperture radar (SAR) coherence

USGS Publications Warehouse

Dietterich, Hannah R.; Poland, Michael P.; Schmidt, David; Cashman, Katharine V.; Sherrod, David R.; Espinosa, Arkin Tapia

2012-01-01

Lava flow mapping is both an essential component of volcano monitoring and a valuable tool for investigating lava flow behavior. Although maps are traditionally created through field surveys, remote sensing allows an extraordinary view of active lava flows while avoiding the difficulties of mapping on location. Synthetic aperture radar (SAR) imagery, in particular, can detect changes in a flow field by comparing two images collected at different times with SAR coherence. New lava flows radically alter the scattering properties of the surface, making the radar signal decorrelated in SAR coherence images. We describe a new technique, SAR Coherence Mapping (SCM), to map lava flows automatically from coherence images independent of look angle or satellite path. We use this approach to map lava flow emplacement during the Pu‘u ‘Ō‘ō-Kupaianaha eruption at Kīlauea, Hawai‘i. The resulting flow maps correspond well with field mapping and better resolve the internal structure of surface flows, as well as the locations of active flow paths. However, the SCM technique is only moderately successful at mapping flows that enter vegetation, which is also often decorrelated between successive SAR images. Along with measurements of planform morphology, we are able to show that the length of time a flow stays decorrelated after initial emplacement is linearly related to the flow thickness. Finally, we use interferograms obtained after flow surfaces become correlated to show that persistent decorrelation is caused by post-emplacement flow subsidence.

Emplacement and dewatering of the world's largest exposed sand injectite complex

NASA Astrophysics Data System (ADS)

Sherry, Timothy J.; Rowe, Christie D.; Kirkpatrick, James D.; Brodsky, Emily E.

2012-08-01

Sandstone injectites form by up or down-section flow of a mobilized sand slurry through fractures in overlying rock. They act as reservoirs and high-permeability conduits through lower permeability rock in hydrocarbon systems. The Yellow Bank Creek Complex, Santa Cruz County, California is the largest known exposure of a sandstone injectite in the world. The complex contains granular textures that record processes of sand slurry flow, multiple pore fluids, and dewatering after emplacement. The injection was initially mobilized from a source containing both water and hydrocarbons. The water-sand slurry reached emplacement depth first, due to lower fluid viscosity. As the sand slurry emplaced, the transition from slurry flow to pore water percolation occurred. This transition resulted in preferred flow channels ˜6 mm wide in which sand grains were weakly aligned (laminae). The hydrocarbon-sand slurry intruded the dewatering sands and locally deformed the laminae. Compaction of the injectite deposit and pore fluid escape caused spaced compaction bands and dewatering pipes which created convolutions of the laminae. The hydrocarbon-rich sand slurry is preserved today as dolomite-cemented sand with oil inclusions. The laminae in this injectite are easily detected due to preferential iron oxide-cementation of the well-aligned sand laminae, and lack of cement in the alternating laminae. Subtle textures like these may develop during sand flow and be present but difficult to detect in other settings. They may explain permeability anisotropy in other sand deposits.

Tracking lava flow emplacement on the east rift zone of Kīlauea, Hawai‘i, with synthetic aperture radar coherence

NASA Astrophysics Data System (ADS)

Dietterich, Hannah R.; Poland, Michael P.; Schmidt, David A.; Cashman, Katharine V.; Sherrod, David R.; Espinosa, Arkin Tapia

2012-05-01

Lava flow mapping is both an essential component of volcano monitoring and a valuable tool for investigating lava flow behavior. Although maps are traditionally created through field surveys, remote sensing allows an extraordinary view of active lava flows while avoiding the difficulties of mapping on location. Synthetic aperture radar (SAR) imagery, in particular, can detect changes in a flow field by comparing two images collected at different times with SAR coherence. New lava flows radically alter the scattering properties of the surface, making the radar signal decorrelated in SAR coherence images. We describe a new technique, SAR Coherence Mapping (SCM), to map lava flows automatically from coherence images independent of look angle or satellite path. We use this approach to map lava flow emplacement during the Pu`u `Ō`ō-Kupaianaha eruption at Kīlauea, Hawai`i. The resulting flow maps correspond well with field mapping and better resolve the internal structure of surface flows, as well as the locations of active flow paths. However, the SCM technique is only moderately successful at mapping flows that enter vegetation, which is also often decorrelated between successive SAR images. Along with measurements of planform morphology, we are able to show that the length of time a flow stays decorrelated after initial emplacement is linearly related to the flow thickness. Finally, we use interferograms obtained after flow surfaces become correlated to show that persistent decorrelation is caused by post-emplacement flow subsidence.

Source, evolution and emplacement of Permian Tarim Basalts: Evidence from U-Pb dating, Sr-Nd-Pb-Hf isotope systematics and whole rock geochemistry of basalts from the Keping area, Xinjiang Uygur Autonomous region, northwest China

NASA Astrophysics Data System (ADS)

Zhang, Dayu; Zhou, Taofa; Yuan, Feng; Jowitt, Simon M.; Fan, Yu; Liu, Shuai

2012-04-01

Permian basalts distribute at least 250,000 km2, and underlie the southwest Tarim Basin in Xinjiang Uygur Autonomous region, northwest China. This vast accumulation of basalt is the main part of the Tarim Large Igneous Province (LIP). The basaltic units in the Lower Permian Kupukuziman and Kaipaizileike Formations in the Keping area, Tarim Basin; were the best exposure of the Permian basalt sequence in the basin. LA-ICP-MS U-Pb dating of zircon from the basal basaltic unit in the section gives an age of 291.9 ± 2.2 Ma (MSWD = 0.30, n = 17); this age, combined with previously published geochronological data, indicates that the basalts in the Tarim Basin were emplaced between 292 Ma and 272 Ma, with about 90% of the basalts being emplaced between 292 and 287 Ma. Basalts from the Keping area have high FeOT (10.8-18.6 wt.%), low Mg#s (0.26-0.60), and exhibit primitive mantle normalized patterns with positive Pb, P and Ti but negative Zr, Y and Ta anomalies. The basalts from both formations have similar 206Pb/204Pb (18.192-18.934), 207Pb/204Pb (15.555-15.598) and 208Pb/204Pb (38.643-38.793) ratios. The basalts also have high ɛSr(t) (45.7-62.1), low ɛNd(t) (-3.6 to -2.2) and low zircon ɛHf(t) (-4.84 to -0.65) values. These characteristics are typical of alkali basalts and suggest that the basalts within the Tarim Basin were derived from an OIB-type mantle source and interacted with enriched mantle (EMI-type) before emplacement. Rare earth element systematics indicate that the parental melts for the basalts were high-degree partial melts derived from garnet lherzolite mantle at the base of the lithosphere. Prior to emplacement, the Tarim Permian Basalts (TPB) underwent fractional crystallization and assimilated crustal material; the basalts were finally emplaced during crustal extension in an intra-plate setting. The wide distribution, deep source and high degree partial melting of the TPB was consistent with a mantle plume origin. The TPB and other coeval igneous rocks in the Tarim Basin constitute a Permian LIP formed by a mantle plume in a similar fashion to the plume-related Emeishan LIP in southwest China.

Facies Relationships and Emplacement History of the 2014-2015 Eruption at Holuhraun, Iceland

NASA Astrophysics Data System (ADS)

Voigt, Joana; Hamilton, Christopher W.; Scheidt, Stephen P.; Jónsdóttir, Ingibjörg; Höskuldsson, Ármann; Þórðarson, Þorvaldur

2017-04-01

The 2014-15 eruption at Holuhraun is the largest flood lava flow emplaced in Iceland since the Laki eruption in 1783-1784. The 2014-15 event extruded approximately 1.46 cubic kilometers of lava (= 1.1-1.2 cubic kilometers calculated as dense rock equivalent) [1, 2] from August 2014 to February 2015 and covered an area of 83.5 square kilometers. This exceeds the volume magma erupted from Kilauea Volcano during the past decade. Studying the products of such a large and recent eruption provides unique insights into the emplacement of flood lavas, which are infrequent in the modern geologic record. The 2014-15 lava flow at Holuhraun therefore offers an ideal study area for examining lava flow textures (i.e., facies) that are unaffected by modification processes induced by running water, aeolian sedimentation, and vegetation. To achieve our aim in investigating the different facies and the emplacement history we used three approaches: 1) Analysis of remote sensing data obtained using Unmanned Aerial Vehicle (UAVs) at resolutions of 1-4 cm per pixel and used to generate 4-20 cm per pixel Digital Terrain Models (DTMs). 2) In-situ field observations establish detailed descriptions of the different facies and their relationships to one and another along the flow margin and accessible contact zones within the interior of the lava field. 3) Compilation of this information into a geospatial database in ArcGIS to compare the known eruption chronology to the different facies. The final orthomosaics and DTMs enable us to identify and map out lava types that make up the flow field and are known to span the spectrum from aā to pāhoehoe morphologies, including subtypes such as spiny, slabby and rubbly pāhoehoe [3]. Furthermore, we also investigate structures specific to individual lava types, such as linear compressional ridges and extensional rifts, platy-ridged pattern, wavelike form, spirals/roses and inflation features including lava rise pits and wedges. The results provide a better understanding of facies arrangements and their relation to effusions rate and versus fluxes within the flow field. [1] Bonnefoy, L. E. et al. 2017: Landscape Evolution after the 2014-2015 Lava Flow at Holuhraun, Iceland. LPSC. [2] Thordarson, et al. 2015: Emplacement and Growth of the August 2014 to February 2015 Nornahraun Lava Flow Field North Iceland. AGU V13D-01. [3] Pedersen, G. et al. 2016: Emplacement dynamics and lava field evolution of the flood basalt eruption at Holuhraun, Iceland: Observations from field and remote sensing data. Vol. 18, EGU2016‒13961.

Mesozoic tectonic history and geochronology of the Kular Dome, Russia and Bendeleben Mountains, Seward Peninsula, Alaska

NASA Astrophysics Data System (ADS)

Harris, Daniel B.

The tectonic history responsible for formation of the major basins of the Arctic and movement of landmasses surrounding these basins remains unclear despite multidisciplinary efforts. Most studies focus on one of four potential movement pathways of the Arctic Alaska-Chukotka microplate during the Mesozoic and the relationship between this movement and formation of the Amerasian Basin. Due to difficulty in access and harsh climate of the Arctic Ocean, most geological studies focus on landmasses surrounding the Amerasian Basin. For this reason, we have conducted research in the Kular Dome of northern Russia and the Bendeleben Mountain Range of the Seward Peninsula, Alaska in an attempt to better constrain timing of emplacement of plutons in these areas and their associated tectonic conditions. For both areas, U-Pb zircon crystallization geochronology was performed on several samples collected from plutons responsible for gneiss dome formation during the Mesozoic. Dating of these plutons in tandem with field observation and thin section analysis of deformation suggests an extensional emplacement setting for both areas during the Middle to Late Cretaceous. In the Kular Dome, intrusion of the Kular pluton occurred from approximately 111-103 Ma along with extensional development of the nearby Yana fault, which was previously interpreted as a regional suture between deposits of the Kolyma-Omolon superterrane and passive-margin sequences of the Verkhoyansk Fold-Thrust Belt. Evidence for extensional emplacement of the Kular pluton includes top-down shear around mantled porphyroblasts plunging along gentle foliation away from the pluton and abundant low-offset normal faults in the area. The Kular Dome also falls into a north-south oriented belt of Late Cretaceous plutons interpreted to have been emplaced under regional extensional conditions based on geochemical discrimination diagrams. Detrital zircon geochronology was also performed on seven samples collected from Triassic sandstones and Jurassic greywackes near the Kular Dome and compared to results from previously studied surrounding regions in Russia and the Arctic Alaska-Chukotka microplate in order to better define the relationship between the Arctic Alaska-Chukotka microplate and northern Russia during the Mesozoic. Results suggest that though the Chukotkan portion of the Arctic Alaska-Chukotka microplate was separated from the Kular Dome area during the Triassic, by the Tithonian it shared similar source regions for detrital zircon populations. Based on detrital zircon data from Chukotka, the Kular Dome, and the In’Yali Debin area, a new tectonic model for the formation of the Amerasian Basin and structures within is proposed. In this new model, Chukotka separated from and moved independently of the North Slope of Alaska during the Late Triassic-Early Jurassic, experiencing strike-slip emplacement along the northern coast of paleo-Russia and closed the South Anyui Ocean via transpression to form the South Anyui suture. Geochronologic and geochemical results from the Bendeleben and Windy Creek plutons of the southeastern Seward Peninsula were also studied to better describe Arctic tectonic conditions during the Late Mesozoic. In this area, six samples were collected from the multiple lithologies seen within the Bendeleben and Windy Creek plutons and were also dated by zircon U-Pb geochronology and analyzed for their major and trace element geochemistry. Results suggest that the Bendeleben and Windy Creek plutons were emplaced during multiple extensionally driven pulses of magmatism above a southward-retreating, northward-subducting slab causing extension in the overlying crust from about 104 Ma to 83 Ma. The magma chamber at depth was experiencing continuous replenishment and liquid segregation causing stratification of the Bendeleben pluton. Magmas of the felsic cap, which now form the outer region of the Bendeleben pluton, were emplaced first, followed by subsequent intrusion of younger, mafic magma from below. Evidence for north-south directed extension during emplacement of the Bendeleben pluton was in the form of consistent east-west dike orientation in the Seward Peninsula, top-down shear in mantled garnet porphyroblasts from country rock surrounding the Bendeleben pluton, gentle foliation dip away from the pluton and stretching lineations around the pluton. Discrimination diagrams based on Rb, Nb and Y concentrations from bulk rock samples supports a collisional or volcanic arc province and is consistent with emplacement in an extensional environment above a subducting plate.

Hiding the Evidence: Growth of plutons by incremental emplacement of sheets in crystal mush

NASA Astrophysics Data System (ADS)

Miller, C. F.; Furbish, D. J.; Claiborne, L. L.; Walker, B. A.; Bleick, H. A.; Steinwinder, T. R.; Koteas, G. C.

2006-12-01

Growing evidence supports the notion that plutons are constructed incrementally, commonly over long periods of time, yet field evidence for the multiple injections that seem to be required is commonly sparse or absent (e.g. Glazner et al. 2004). Timescales of up to several million years, among other arguments, indicate that the dominant volume does not remain largely molten, yet if growing plutons are constructed from rapidly solidifying increments it is unlikely that intrusive contacts would escape notice. A model wherein magma increments are emplaced into crystal mush rather than either solid or crystal-poor material provides a plausible explanation for this apparent conundrum. A partially solidified intrusion undoubtedly comprises zones with contrasting melt fraction and therefore strength. The emplacement of dikes that intrude such a strength-zoned intrusion will be guided by the contrasts in the same way that dikes intruding solid media: magma spreads rather than continuing to propagate upward where it encounters a zone of higher rigidity (e.g. experiments by Kavanagh et al. 2006). We propose that ascending magma is in essence trapped by low-strength zones in plutonic mushes that are relatively melt-rich. In many cases, such zones may be subhorizontal and thus sill-like in geometry, but shapes and orientations could be highly variable, depending on the prior history of the composite intrusion. Contacts will commonly be obscure from the start because the contrast between intruding material (crystal-poorer magma) and host (crystal-richer mush) is subtle, and it may be obscured even further by subsequent destabilization of the mush. Field evidence and zircon zoning stratigraphy in plutons of the Colorado River region of southern Nevada support the hypothesis that emplacement of magma replenishments into a mush host is important in pluton construction. Except for highly fractionated dikes and sills, the dominant granite unit of the Spirit Mountain batholith displays only subtle internal contacts. However, ages and elemental zoning in zircons demonstrate a protracted history of almost 2 million years, major fluctuations in T and host melt chemistry, and mixing of strongly contrasting zircon populations in single samples (Walker et al. in press; Claiborne et al. in press). We interpret this to reflect reactivation of mushes and entrainment of earlier-formed crystals, and we infer that this was in response to granitic replenishment. Much of the smaller Aztec Wash pluton comprises interlayered cumulate-textured quartz monzonite and mafic sheets. The latest phase of pluton emplacement is marked by numerous thick granite "sills" that intruded the subhorizontal quartz monzonite sheets. Contacts between granite and quartz monzonite are "soft," highly irregular on cm-dm scale with coarse xenocrysts from the quartz monzonite entrained in the fine-grained granite. We interpret the granite replenishments to have spread laterally within mushy, melt-bearing quartz monzonite, beneath rigid mafic sheets. In this case, clear evidence for the emplacement process is fortuitously preserved because the granite was emplaced in the waning stage of thermal lifetime of the pluton, and because the mafic sheets enhance the strength contrast and make the geometry more visible.

Conceptual waste packaging options for deep borehole disposal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Su, Jiann -Cherng; Hardin, Ernest L.

This report presents four concepts for packaging of radioactive waste for disposal in deep boreholes. Two of these are reference-size packages (11 inch outer diameter) and two are smaller (5 inch) for disposal of Cs/Sr capsules. All four have an assumed length of approximately 18.5 feet, which allows the internal length of the waste volume to be 16.4 feet. However, package length and volume can be scaled by changing the length of the middle, tubular section. The materials proposed for use are low-alloy steels, commonly used in the oil-and-gas industry. Threaded connections between packages, and internal threads used to sealmore » the waste cavity, are common oilfield types. Two types of fill ports are proposed: flask-type and internal-flush. All four package design concepts would withstand hydrostatic pressure of 9,600 psi, with factor safety 2.0. The combined loading condition includes axial tension and compression from the weight of a string or stack of packages in the disposal borehole, either during lower and emplacement of a string, or after stacking of multiple packages emplaced singly. Combined loading also includes bending that may occur during emplacement, particularly for a string of packages threaded together. Flask-type packages would be fabricated and heat-treated, if necessary, before loading waste. The fill port would be narrower than the waste cavity inner diameter, so the flask type is suitable for directly loading bulk granular waste, or loading slim waste canisters (e.g., containing Cs/Sr capsules) that fit through the port. The fill port would be sealed with a tapered, threaded plug, with a welded cover plate (welded after loading). Threaded connections between packages and between packages and a drill string, would be standard drill pipe threads. The internal flush packaging concepts would use semi-flush oilfield tubing, which is internally flush but has a slight external upset at the joints. This type of tubing can be obtained with premium, low-profile threaded connections at each end. The internal-flush design would be suitable for loading waste that arrives from the originating site in weld-sealed, cylindrical canisters. Internal, tapered plugs with sealing filet welds would seal the tubing at each end. The taper would be precisely machined onto both the tubing and the plug, producing a metal-metal sealing surface that is compressed as the package is subjected to hydrostatic pressure. The lower plug would be welded in place before loading, while the upper plug would be placed and welded after loading. Conceptual Waste Packaging Options for Deep Borehole Disposal July 30, 2015 iv Threaded connections between packages would allow emplacement singly or in strings screwed together at the disposal site. For emplacement on a drill string the drill pipe would be connected directly into the top package of a string (using an adapter sub to mate with premium semi-flush tubing threads). Alternatively, for wireline emplacement the same package designs could be emplaced singly using a sub with wireline latch, on the upper end. Threaded connections on the bottom of the lowermost package would allow attachment of a crush box, instrumentation, etc.« less

Understanding the mechanical coupling between magma emplacement and the resulting deformation: the example of saucer-shaped sills

NASA Astrophysics Data System (ADS)

Galland, O.; Neumann, E. R.; Planke, S.

2009-12-01

The mechanical coupling between magma intrusions and the surrounding rocks plays a major role in the emplacement of volcanic plumbing systems. The deformation associated with magma emplacement has been widely studied, such as caldera inflation/deflation, volcano deformation during dike intrusion, and doming above laccoliths. However, the feedback processes, i.e. the effect of deformation resulting from intruding magma on the propagation of the intrusion itself, have rarely been studied. Saucer-shaped sills are adequate geological objects to understand such processes. Indeed, observation show that saucer-shaped sills are often associated with dome-like structures affecting the overlying sediments. In addition, there is a clear geometrical relation between the sills and the domes: the dome diameters are almost identical to those of saucers, and the tips of the inclined sheets of saucers are superimposed on the edges of the domes. In this presentation, we report on experimental investigations of the emplacement mechanisms of saucer-shaped sills and associated deformation. The model materials were (1) cohesive fine-grained silica flour, representing brittle crust, and (2) molten low-viscosity oil, representing magma. A weak layer located at the top of the injection inlet simulates strata. The main variable parameter is injection depth. During experiments, the surface of the model is digitalized through a structured light technique based on the moiré projection principle. Such a tool provides topographic maps of the surface of the model and allows a periodic (every 1.5 s) monitoring of the model topography. When the model magma starts intruding, a symmetrical dome rises above the inlet. Subsequently, the dome inflates and widens, and then evolves to a plateau-like feature, with nearly flat upper surface and steep sides. At the end of the experiments, the intruding liquid erupts at the edge of the plateau. The intrusions formed in the experiments are saucer-shaped sills, with flat inner sills, steep inclined sheets and flatter outer sills. Like in nature, there are clear relations between the intrusions geometries and the domes: (1) the inclined sheet formed underneath the edge of the plateau, and the oil erupts at its outermost edge; (2) the diameter of the sill is similar to that of the dome. In addition, the diameter of the sills and the domes increased with increasing injection depth. Our results suggest that the evolution of the deforming surface reflects the evolution of the intrusion, i.e. the first doming phase corresponds to the emplacement of a horizontal basal sill, and the dome-to-plateau transition corresponds to the transition from a basal sill to an inclined sheet. Conversely, the correlation between the dome and intrusion width and emplacement depth suggests that the development of the doming exerts a feedback on the sill propagation and controls the formation of the inclined sheets. Thus, our study shows that a good understanding of the coupling between magma emplacement and the associated deformation has major implications for the understanding of magma transport in volcanic systems.

The coupled geochemistry of Au and As in pyrite from ore deposits and geothermal fields: monitoring fluid evolution and external forcing factors in hydrothermal systems

NASA Astrophysics Data System (ADS)

Reich, M.; Deditius, A.; Tardani, D.; Sanchez-Alfaro, P.

2014-12-01

Among the many factors influencing the complex process of lava flow emplacement, the interaction with the substrate onto which flow is emplaced plays a central role. Lava flows are rarely emplaced onto smooth or regular surfaces. For example, at Kīlauea Volcano, Hawai'i, lava flows regularly flow over solid rock, vegetation, basaltic or silica sand, and man-made materials, including asphalt and concrete. In situ studies of lava-substrate interactions are inherently difficult, and often dangerous, to carry-out, requiring the design of controllable laboratory experiments. We investigate the effects of substrate grain size, cohesion, and roughness on flow mobility and morphology through a series of flow experiments using analog materials and molten basalt. We have developed a series of experiments that allow for adjustable substrate parameters and analyze their effects on lava flow emplacement. The first set of experiments are performed at the Fluids Mechanics Laboratory at the Lamont-Doherty Earth Observatory and focus on two analog materials: polyethylene glycol (PEG), a commercially available wax, and corn syrup. The fluids were each extruded onto a series of scaled substrate beds to replicate the emplacement of lava in a natural environment. Preliminary experiments demonstrated that irregular topography, particularly topography with a height amplitude similar to that of the flow itself, can affect flow morphology, width, and velocity by acting as local barriers or culverts to the fluid. This is expected from observations of fluid flow in natural environments. A follow-up set of experiments will be conducted in Fall 2015 at the Syracuse University (SU) Lava Project Lab. In this set, we will pour molten basalt directly onto a series of substrates representing natural environments found on the Earth and other rocky bodies in the Solar System. These experiments will allow for analysis of the effects of basaltic composition and high temperatures on lava-substrate heat transfer and mechanical interactions. Results will be used to improve current lava flow prediction models as well as increase our understanding of the evolution of volcanic regions on the Earth and other planets.

Investigating lava-substrate interactions through flow experiments with syrup, wax, and molten basalt

NASA Astrophysics Data System (ADS)

Rumpf, M. E.; Lev, E.

2015-12-01

Among the many factors influencing the complex process of lava flow emplacement, the interaction with the substrate onto which flow is emplaced plays a central role. Lava flows are rarely emplaced onto smooth or regular surfaces. For example, at Kīlauea Volcano, Hawai'i, lava flows regularly flow over solid rock, vegetation, basaltic or silica sand, and man-made materials, including asphalt and concrete. In situ studies of lava-substrate interactions are inherently difficult, and often dangerous, to carry-out, requiring the design of controllable laboratory experiments. We investigate the effects of substrate grain size, cohesion, and roughness on flow mobility and morphology through a series of flow experiments using analog materials and molten basalt. We have developed a series of experiments that allow for adjustable substrate parameters and analyze their effects on lava flow emplacement. The first set of experiments are performed at the Fluids Mechanics Laboratory at the Lamont-Doherty Earth Observatory and focus on two analog materials: polyethylene glycol (PEG), a commercially available wax, and corn syrup. The fluids were each extruded onto a series of scaled substrate beds to replicate the emplacement of lava in a natural environment. Preliminary experiments demonstrated that irregular topography, particularly topography with a height amplitude similar to that of the flow itself, can affect flow morphology, width, and velocity by acting as local barriers or culverts to the fluid. This is expected from observations of fluid flow in natural environments. A follow-up set of experiments will be conducted in Fall 2015 at the Syracuse University (SU) Lava Project Lab. In this set, we will pour molten basalt directly onto a series of substrates representing natural environments found on the Earth and other rocky bodies in the Solar System. These experiments will allow for analysis of the effects of basaltic composition and high temperatures on lava-substrate heat transfer and mechanical interactions. Results will be used to improve current lava flow prediction models as well as increase our understanding of the evolution of volcanic regions on the Earth and other planets.

Development of the 10-11 July 2015 two-stage sequence of multiple emplacements of pyroclastic density currents at Volcán de Colima, México: Insight from associated seismic signals

NASA Astrophysics Data System (ADS)

Zobin, Vyacheslav M.

2018-02-01

The 10-11 July 2015 partial collapses of the lava dome in the crater of Volcán de Colima, México, were accompanied by a sequence of two-stage multiple PDCs, separated by a 15-h interval, with a total bulk volume of 14.2 × 106 m3 of fragmentary material and runout distances reaching 9.1 and 10.3 km, respectively (Reyes-Dávila et al., 2016). Broad-band seismic signals, associated with the PDCs and recorded at seismic station EZ5 installed at a distance of 4 km from the crater, were used for analysis of the 20-h eruption process. This process included two stages of the multiple PDCs emplacements, two one-hour periods of preliminary events to each of the stages, and the inter-stage period. Analysis of seismic signals allowed us to identify the types of volcanic events composing this eruption episode and estimate their quantitative characteristics and spectral parameters of generated seismic signals. It was shown that the seismic signals produced by PDCs emplacements, recorded during the two stages, were characterized by different characteristics. The second stage PDCs had radiated greater seismic energy than the PDCs emplaced during the first stage. Spectral analysis of the seismic signals, produced by PDCs, indicates a clearly separation in frequency content at 1.95 Hz between the higher-frequency events of the first stage and the lower-frequency events of the second stage of the PDCs emplacements. The obtained difference in the spectral contents of the seismic signals, produced by the movement of two multiple PDCs, may be supposed as a consequence of the proposed relative difference in the volumes of the PDCs of two multiple sequences due to a difference in the level of radiated seismic energy and a change in bottom conditions of the ravines during their passing along the ravines. Results of seismic study were used in discussion of the nature of the two-stage eruptive process.

Investigating the anisotropy of magnetic susceptibility and other rock magnetic properties of the Beaver River Diabase in northeastern Minnesota

NASA Astrophysics Data System (ADS)

Hariri, Samer H.

The Beaver River Diabase (BRD) is a series of mafic dikes and sills within the Beaver Bay Complex (BBC) of northern Minnesota, which formed during the development of the ~1.1 Ga Midcontinent Rift (MCR). The BRD is one of the youngest and most extensive intrusive phases of the BBC. The BRD dikes and sills were emplaced into the medial levels of the 6-10 kilometer-thick North Shore Volcanic Group and occur over an arcuate area extending 120 by 20 kilometers. The BRD is composed of fine- to medium-grained ophitic olivine gabbro and does not display obvious foliation or lineation features and rarely displays modal layering. Without obvious magmatic internal structures, it is difficult to determine emplacement properties such as flow direction using standard geologic mapping or petrographic techniques. For this reason, we measured the anisotropy of magnetic susceptibility (AMS), in conjunction with other rock magnetic properties, to better understand the BRD's emplacement and deformation history in the context of the MCR. AMS measures the directional dependence of low-field magnetic susceptibility, and is used to infer a shape-preferred orientation of magnetic minerals within a rock, which can be related to specific emplacement mechanisms (e.g. directional flow or settling). Preliminary analysis of AMS at 20 sites within the southern half of the BRD (with 4-7 samples per site) shows maximum susceptibility values between 4.48 x 10-6 and 2.22 x 10-4 m 3/kg (1165 and 65400 μSI). Most specimens display nearly isotropic AMS ellipsoids (Pj < 1.15) with minor degrees of prolateness and oblateness. However, about 20% of specimens have higher anisotropies (Pj between 1.15 and 1.67) and higher degrees of oblateness and prolateness. Variations in AMS properties may reflect differences in concentration and composition of magnetic minerals, as well as emplacement mechanisms. Measurements of susceptibility as a function of temperature yield Curie points between 470 and 570 °C, indicating the presence of low-titanium titanomagnetite. Major hysteresis loops show coercivities between 1 and 25 mT, consistent with titanomagnetite as the dominant remanence carrier.

Secondary Mineral Deposits and Evidence of Past Seismicity and Heating of the Proposed Repository Horizon at Yucca Mountain, Nevada

USGS Publications Warehouse

Whelan, Josheph F.

2004-01-01

The Drift Degradation Analysis (DDA) (BSC, 2003) for the proposed high-level radioactive waste repository at Yucca Mountain, Nevada, describes model simulations of the effects of pre- and post-closure seismicity and waste-induced heating on emplacement drifts. Based on probabilistic seismic hazard analyses of the intensity and frequency of future seismic events in the region (CRWMS M&O, 1998), the DDA concludes that future seismicity will lead to substantial damage to emplacement drifts, particularly those in the lithophysal tuffs, where some simulations predict complete collapse of the drift walls. Secondary mineral studies conducted by the U.S. Geological Survey since 1995 indicate that secondary calcite and silica have been deposited in some fractures and lithophysal cavities in the unsaturated zone (UZ) at Yucca Mountain during at least the past 10 million years (m.y.), and probably since the tuffs cooled to less than 100?C. Tuff fragments, likely generated by past seismic activity, have commonly been incorporated into the secondary mineral depositional sequences. Preliminary observations indicate that seismic activity has generated few, if any, tuff fragments during the last 2 to 4 m.y., which may be inconsistent with the predictions of drift-wall collapse described in the DDA. Whether or not seismicity-induced tuff fragmentation occurring at centimeter to decimeter scales in the fracture and cavity openings relates directly to failure of tuff walls in the 5.5-m-diameter waste emplacement drifts, the deposits do provide a potential record of the spatial and temporal distribution of tuff fragments in the UZ. In addition, the preservation of weakly attached coatings and (or) delicate, upright blades of calcite in the secondary mineral deposits provides an upper limit for ground motion during the late stage of deposition that might be used as input to future DDA simulations. Finally, bleaching and alteration at a few of the secondary mineral sites indicate that they were subjected to heated gases at approximately the temperatures expected from waste emplacement. These deposits provide at least limited textural and mineralogic analogs for waste-induced, high-humidity thermal alteration of emplacement drift wall rocks.

Physical controls and depth of emplacement of igneous bodies: A review

NASA Astrophysics Data System (ADS)

Menand, Thierry

2011-03-01

The formation and growth of magma bodies are now recognised as involving the amalgamation of successive, discrete pulses such as sills. Sills would thus represent the building blocks of larger plutons ( sensu lato). Mechanical and thermal considerations on the incremental development of these plutons raise the issue of the crustal levels at which magma can stall and accumulate as sills. Reviewing the mechanisms that could a priori explain sill formation, it is shown that principal physical controls include: rigidity contrast, where sills form at the interface between soft strata overlaid by comparatively stiffer strata; rheology anisotropy, where sills form within the weakest ductile zones; and rotation of deviatoric stress, where sills form when the minimum compressive stress becomes vertical. Comparatively, the concept of neutral buoyancy is unlikely to play a leading control in the emplacement of sills, although it could assist their formation. These different controls on sill formation, however, do not necessarily operate on the same length scale. The length scale associated with the presence of interfaces separating upper stiffer layers from lower softer ones determines the depth at which rigidity-controlled sills will form. On another hand, the emplacement depths for rheology-controlled sills are likely to be determined by the distribution of the weakest ductile zones. Whereas the emplacement depth of stress-controlled sills is determined by a balance between the horizontal maximum compressive stress, which favours sill formation, and the buoyancy of their feeder dykes, which drives magma vertically. Ultimately, the depth at which a sill forms depends on whether crustal anisotropy or stress rotation is the dominant control, i.e. which of these processes operates at the smallest length scale. Using dimensional analysis, it is shown that sill formation controlled by remote stress rotation would occur on length scales of hundreds of meters or greater. This therefore suggests that crustal heterogeneities and their associated anisotropy are likely to play a larger role than remote stress rotation in controlling sill emplacement, unless these heterogeneities are several hundred meters or more apart. This also reinforces the role of local stress barriers, owing to interactions between deviatoric stress and crustal heterogeneities, in the formation of sills.

Magmatism and crustal extension: Constraining activation of the ductile shearing along the Gediz detachment, Menderes Massif (western Turkey)

NASA Astrophysics Data System (ADS)

Rossetti, Federico; Asti, Riccardo; Faccenna, Claudio; Gerdes, Axel; Lucci, Federico; Theye, Thomas

2017-06-01

The Menderes Massif of western Turkey is a key area to study feedback relationships between magma generation/emplacement and activation of extensional detachment tectonics. Here, we present new textural analysis and in situ U-(Th)-Pb titanite dating from selected samples collected in the transition from the undeformed to the mylonitized zones of the Salihli granodiorite at the footwall of the Neogene, ductile-to-brittle, top-to-the-NNE Gediz-Alaşheir (GDF) detachment fault. Ductile shearing was accompanied by the fluid-mediated sub-solidus transformation of the granodiorite to orthogneiss, which occurred at shallower crustal levels and temperatures compatible with the upper greenschist-to-amphibolite facies metamorphic conditions (530-580 °C and P < 2 GPa). The syn-tectonic metamorphic overgrowth of REE-poor titanite on pristine REE-rich igneous titanite offers the possibility to constrain the timing of magma crystallisation and solid-state shearing at the footwall of the Gediz detachment. The common Pb corrected 206Pb/238U (206Pb*/238U) ages and the REE re-distribution in titanite that spatially correlates with the Th/U zoning suggests that titanite predominantly preserve open-system ages during fluid-assisted syn-tectonic re-crystallisation in the transition from magma crystallization and emplacement (at 16-17 Ma) to the syn-tectonic, solid-state shearing (at 14-15 Ma). A minimum time lapse of ca. 1-2 Ma is then inferred between the crustal emplacement of the Salihli granodiorite and nucleation of the ductile extensional shearing along the Gediz detachment. The reconstruction of the cooling history of the Salihli granodiorite documents a punctuated evolution dominated by two episodes of rapid cooling, between 14 Ma and 12 Ma ( 100 °C/Ma) and between 3 and 2 Ma ( 105 °C/Ma). We relate the first episode to nucleation and development of post-emplacement of ductile shearing along the GDF and the second to brittle high-angle faulting, respectively. Our dataset suggests that in the Menderes Massif the activation of ductile extension was a consequence, rather than the cause, of magma emplacement in the extending crust.

Posthole Broadband Sensor Emplacement vs. Surface Vaults: Observations of Comparative Noise Performance and Trade-offs

NASA Astrophysics Data System (ADS)

Sweet, J. R.; Beaudoin, B. C.; Barstow, N.; Pfeifer, M.; Anderson, K. R.; Frassetto, A.

2015-12-01

Advances in seismometer design have diversified the range of instruments available for use in temporary field installations. IRIS programs, primarily PASSCAL and the Transportable Array (TA), have helped steer development of these new instruments to meet these evolving needs. PASSCAL operates a small pool of posthole broadband sensors, purpose built for direct burial. Near surface posthole installations are a new, cost effective, and logistically simple technique for broadband emplacement that is an alternative to the vault installations used in portable broadband seismic experiments for nearly 30 years. Direct burial installation is limited to the time and effort required to dig the borehole and emplace the sensor, thus reducing both material costs and time to install. Also, in Alaska, extreme environments and difficult logistics make standard TA tank vaults inappropriate for most sites. TA has developed improved deployment strategies for these environments. There, holes for posthole sensors are hammer- drilled or augered to several meters depth in soil, permafrost, or bedrock and then cased. These emplacement costs are generally less than standard TA vaults. We compare various installation techniques for test cases as well as general deployments of PASSCAL and TA stations. Automated noise performance analyses have been part of the TA throughout its operation, but until recently vault performance for portable installations supported by the PASSCAL program was sparse. In this study, we select a suite of co-located direct burial and surface vault installations and compare their noise performance using probability density functions. Our initial analyses suggest that direct burial sensors have lower noise levels than vault installations on both horizontal and vertical channels across a range of periods spanning <1 s to 100 s. However, most of these initial experiments for PASSCAL were with sensors not purpose built for direct burial and it became obvious that a sensor designed for direct burial was necessary. For the TA, direct emplacement of purpose-built sensors has routinely improved noise levels, particularly beyond about 20 s, by tens of dB. These results suggest that moving towards an instrument pool composed primarily of purpose-built direct burial sensors could yield higher-quality data at lower cost.

Crustal structure and evolution of the NW Zagros Mountains (Iran): Insights from numerical modeling of the interplay between surface and tectonic processes

NASA Astrophysics Data System (ADS)

Saura, Eduard; Garcia-Castellanos, Daniel; Casciello, Emilio; Vergés, Jaume

2014-05-01

Protracted Arabia-Eurasia convergence resulted in the closure of the >2000 km wide Neo-Tethys Ocean from early Late Cretaceous to Recent. This process was controlled by the structure of the NE margin of the Arabian plate, the NE-dipping oceanic subduction beneath Eurasia, the obduction of oceanic lithosphere and the collision of small continental and volcanic arc domains of the SW margin of Eurasia. The evolution of the Zagros Amiran and Mesopotamian foreland basins is studied in this work along a ~700 km long transect in NW Zagros constrained by field, seismic and published data. We use the well-defined geometries and ages of the Amiran and Mesopotamian foreland basins to estimate the elastic thickness of the lithosphere and model the evolution of the deformation to quantitatively link the topographic, tectonic and sedimentary evolution of the system. Modelling results show two major stages of emplacement. The obduction (pre-collision) stage involves the thin thrust sheets of the Kermanshah complex together with the Bisotun basement. The collision stage corresponds to the emplacement of the basement duplex and associated crustal thickening, coeval to the out of sequence emplacement of Gaveh Rud and Imbricated Zone in the hinterland. The geodynamic model is consistent with the history of the foreland basins, with the regional isostasy model, and with a simple scenario for the surface process efficiency. The emplacement of Bisotun basement during obduction tectonically loaded and flexed the Arabian plate triggering deposition in the Amiran foreland basin. The basement units emplaced during the last 10 My, flexed the Arabian plate below the Mesopotamian basin. During this stage, material eroded from the Simply Folded belt and the Imbricated zone was not enough to fill the Mesopotamian basin, which, according to our numerical model results, required a maximum additional sediment supply of 80 m/Myr. This additional supply had to be provided by an axial drainage system, which can be correlated by the income of paleo-Tigris and paleo-Eufrates rivers transporting sediments from north-westernmost areas.

Using volcanic spatter to contain eruptions in Idaho and at the Marius Hills on the Moon

NASA Astrophysics Data System (ADS)

Rader, E. L.; Heldmann, J.; Wysocki, R.; Kobs-Nawotniak, S. E.; Hughes, S. S.; Sehlke, A.; Garry, W. B.

2017-12-01

Natural spatter clasts from Craters of the Moon volcanic field ( 49 wt.% SiO2) exhibit characteristic morphological traits including clast length, width, vesicularity, and degree of fusion between clasts. Experimental spatter clasts created at the Syracuse Lava Project ( 50 wt.% SiO2) mimic these traits, suggesting spatter only forms in a narrow range of thermal and eruptive conditions. The possible identification of spatter cones at the Marius Hills allows for the conditions that form spatter on Earth to be applied (given lunar thermal constants) to the Moon and constrain eruption duration and eruption temperature for these lunar volcanoes. Higher emplacement temperatures of experimental spatter were associated with more fusion between clasts, less void space between clasts, and more elongated clast shape. Natural clasts had, on average, about 15-35% fusion between clasts, which was achieved experimentally with clasts that were emplaced at 800-950oC, had cooling rates between 6-9oC/min, and were above the glass transition temperature (700oC) for between 35-70 minutes. Numerical modeling allowed for the calculation of accumulation rates based on heat loss resulting in the listed conditions above and were found to be 0.5-2 m/h for Craters of the Moon spatter cones. Heat loss on the Moon will be less efficient as clasts travel from the vent to the ground, retaining more heat by the time of emplacement due to the lack of cooling by convection. By adjusting the numerical model to account for heat transfer in a vacuum, cooling rates of 4oC and emplacement temperatures between 850-1000oC allowed for similar time above 700oC with accumulation rates between 1-10 m/h. Given the height of one hypothesized spatter cone in the Marius Hills is about 100 m tall, it would have taken 10-100 eruption hours to build that feature. Further imaging of spatter deposits on the Moon would allow for the direct comparison of ellipticity of clasts as well as fusion and void space between clasts. This would allow for better constrained accumulations rates, emplacement temperatures, and eventually eruption characteristics of lunar volcanism.

Water On Mars: Mode of Emplacement, Scale, Behavior and Fate.

NASA Astrophysics Data System (ADS)

Head, J. W.

There is clear evidence for standing bodies of water in different places and at different times in the history of Mars. The martian outflow channels emptied into the northern lowlands primarily in the Late Hesperian Period and their characteristics suggest to many workers that a large standing body of water, or ocean, was produced as a result. Characteristics of northern lowland deposits in the Early Amazonian Period suggest that by this time such an ocean was gone. We analyze the fate of such standing bodies of water under climatic conditions similar to the present. The evolution of water loaded with sediments emplaced by outflow channel formation would include three phases. (1) Violent emplacement of warm water followed by a short period of intensive evaporation and convection. Water vapor would strongly influence the climate, at least for a geologically short time; when the water reached 277 K, boiling and intensive convection ceased and sediments were deposited. (2) Geologically fast (104 years) freezing accompanied by weak convective water movement. (3) Sublimation of the ice lasted longer than freezing, but for a geologically short period. The rate and latitudinal dependence of sublimation, and locations of water vapor condensation, crucially depend on planetary obliquity, climate, and sediment veneering of the ice. Several observations support the hypothesis that the Late Hesperian Vastitas Borealis Formation is the sublimation residue of the ocean. Geological evidence has been cited to support a `warm, wet' era in the earlier Noachian Period (e.g., valley networks, degradation rates, etc.) and standing bodies of water under these earlier conditions have different origins and could have significantly longer residence times. Critical assessment of this evidence leads to several scenarios for the emplacement style, location and fate of water on early Mars, and the important transition to conditions similar to those of today. Candidate early Mars emplacement styles include: 1) pluvial, 2) sapping and groundwater recharge, 3) ice sheet meltback, 4) global hydrostatic equilibrium, and 5) cryospheric seal disruption. We examine evidence for these mechanism for formation of standing bodies of water in the history of Mars, and assess their fate, including sequestration in polar and polar-like deposits.

Standing Bodies of Water on Mars: A Review of Their Mode of Emplacement, Scale, Behavior and Fate

NASA Astrophysics Data System (ADS)

Head, J. W.

2001-12-01

There is clear evidence for standing bodies of water in different places and at different times in the history of Mars. The martian outflow channels debouched into the northern lowlands primarily in the Late Hesperian Period and their characteristics suggest to many workers that a large standing body of water, or ocean, was produced as a result. Characteristics of northern lowland deposits in the Early Amazonian Period suggest that by this time such an ocean was gone. What would be the fate of such standing bodies of water under climatic conditions similar to the present? The evolution of water loaded with sediments emplaced by outflow channel formation would include three phases. (1) Violent emplacement of warm water followed by a short period of intensive evaporation and convection. Water vapor would strongly influence the climate, at least for a geologically short time; when the water reached 277 K, boiling and intensive convection ceased and sediments were deposited. (2) Geologically fast (104years) freezing accompanied by weak convective water movement. (3) Sublimation of the ice lasted longer than freezing, but for a geologically short period. The rate and latitudinal dependence of sublimation, and locations of water vapor condensation, crucially depend on planetary obliquity, climate, and sediment veneering of the ice. Several observations support the hypothesis that the Late Hesperian Vastitas Borealis Formation is the sublimation residue of the ocean. Geological evidence has been cited to support a `warm, wet' era in the earlier Noachian Period (e.g., valley networks, degradation rates, etc.) and standing bodies of water under these earlier conditions have different origins and could have significantly longer residence times. Critical assessment of this evidence leads to several scenarios for the emplacement style, location and fate of water on early Mars, and the important transition to conditions similar to those of today. Candidate early Mars emplacement styles include: 1) pluvial, 2) sapping and groundwater recharge, 3) ice sheet meltback, 4) global hydrostatic equilibrium, and 5) cryospheric seal disruption. We examine evidence for these mechanism for formation of standing bodies of water in the history of Mars, and assess their fate. Examples range in age from Noachian to Late Amazonian.

Impact Cratering Processes as Understood Through Martian and Terrestrial Analog Studies

NASA Astrophysics Data System (ADS)

Caudill, C. M.; Osinski, G. R.; Tornabene, L. L.

2016-12-01

Impact ejecta deposits allow an understanding of subsurface lithologies, volatile content, and other compositional and physical properties of a planetary crust, yet development and emplacement of these deposits on terrestrial bodies throughout the solar system is still widely debated. Relating relatively well-preserved Martian ejecta to terrestrial impact deposits is an area of active research. In this study, we report on the mapping and geologic interpretation of 150-km diameter Bakhuysen Crater, Mars, which is likely large enough to have produced a significant volume of melt, and has uniquely preserved ejecta deposits. Our mapping supports the current formation hypothesis for Martian crater-related pitted material, where pits are likened to collapsed degassing features identified at the Ries and Haughton terrestrial impact structures. As hot impact melt-bearing ejecta deposits are emplaced over volatile-saturated material during crater formation, a rapid degassing of the underlying layer results in lapilli-like fluid and gas flow pipes which may eventually lead to collapse features on the surface. At the Haughton impact structure, degassing pipes are related to crater fracture and fault systems; this is analogous to structure and collapse pits mapped in Bakhuysen Crater. Based on stratigraphic superposition, surface and flow texture, and morphological and thermophysical mapping of Bakhuysen, we interpret the top-most ejecta unit to be likely melt-bearing and analogous to terrestrial impact deposits (e.g., Ries suevites). Furthermore, we suggest that Chicxulub is an apt terrestrial comparison based on its final diameter and the evidence of a ballistically-emplaced and volatile-entrained initial ejecta. This is significant as Bakhuysen ejecta deposits may provide insight into larger impact structures where limited exposures make studies difficult. This supports previous work which suggests that given similarities in volatile content and subsurface stratigraphy, mechanisms of multi-unit ejecta emplacement extend to impact cratering processes on comparable rocky bodies. The widespread pitted material, ejecta rampart and lobe formations, and distal debris flows associated with Bakhuysen impactite emplacement further indicates a volatile-rich Martian crust during its formation.

Playing jigsaw with Large Igneous Provinces—A plate tectonic reconstruction of Ontong Java Nui, West Pacific

NASA Astrophysics Data System (ADS)

Hochmuth, Katharina; Gohl, Karsten; Uenzelmann-Neben, Gabriele

2015-11-01

The three largest Large Igneous Provinces (LIP) of the western Pacific—Ontong Java, Manihiki, and Hikurangi Plateaus—were emplaced during the Cretaceous Normal Superchron and show strong similarities in their geochemistry and petrology. The plate tectonic relationship between those LIPs, herein referred to as Ontong Java Nui, is uncertain, but a joined emplacement was proposed by Taylor (2006). Since this hypothesis is still highly debated and struggles to explain features such as the strong differences in crustal thickness between the different plateaus, we revisited the joined emplacement of Ontong Java Nui in light of new data from the Manihiki Plateau. By evaluating seismic refraction/wide-angle reflection data along with seismic reflection records of the margins of the proposed "Super"-LIP, a detailed scenario for the emplacement and the initial phase of breakup has been developed. The LIP is a result of an interaction of the arriving plume head with the Phoenix-Pacific spreading ridge in the Early Cretaceous. The breakup of the LIP shows a complicated interplay between multiple microplates and tectonic forces such as rifting, shearing, and rotation. Our plate kinematic model of the western Pacific incorporates new evidence from the breakup margins of the LIPs, the tectonic fabric of the seafloor, as well as previously published tectonic concepts such as the rotation of the LIPs. The updated rotation poles of the western Pacific allow a detailed plate tectonic reconstruction of the region during the Cretaceous Normal Superchron and highlight the important role of LIPs in the plate tectonic framework.

The emplacement of the Peridotite Nappe of New Caledonia and its bearing on the tectonics of obduction

NASA Astrophysics Data System (ADS)

Gautier, Pierre; Quesnel, Benoît; Boulvais, Philippe; Cathelineau, Michel

2016-12-01

The Peridotite Nappe of New Caledonia is one of the few ophiolites worldwide that escaped collisional orogeny after obduction. Here we describe the deformation associated with serpentinization in two klippes of the nappe in northwestern New Caledonia. The klippes are flat lying and involve S/SW vergent reverse-slip shear zones which are true compressional structures in origin. Further northeast, the nappe is folded in association with the development of a steep schistosity in low-grade metasediments. This difference in structural style indicates that the Peridotite Nappe experienced compression at greater depths toward its root zone, suggesting a "push from the rear" mechanism of emplacement. This supports the view that the nappe has been emplaced through horizontal contraction sustained by plate convergence. We establish a crustal-scale cross section at the end of the obduction event, before Neogene extension. This involves a large fold nappe of high-pressure rocks bounded from below by a major thrust. Furthermore, we show that obduction in New Caledonia occurred through dextral oblique convergence. Oblique convergence probably resulted from the initial obliquity between the subduction trench and the continental ribbon that became incorporated in it. This obliquity can solve the paradox of the Peridotite Nappe seemingly being emplaced at the same time the high-pressure rocks were exhumed. Oblique convergence together with focused erosional denudation on the northeastern flank of the island led to exhumation of the metamorphic rocks in a steep fold nappe rising through the rear part of the orogen.

Morphology and emplacement of a long channeled lava flow near Ascraeus Mons Volcano, Mars

NASA Astrophysics Data System (ADS)

Garry, W. Brent; Zimbelman, James R.; Gregg, Tracy K. P.

2007-08-01

Channeled lava flows, hundreds of kilometers long, are common on the lower flanks of the Tharsis Montes on Mars. Our analysis of a 690-km-long lava flow along the southwest perimeter of Ascraeus Mons shows that it was emplaced on low local slopes (<0.3°), with a deep channel (~20 m), and at high effusion rates (19,000-29,000 m3/s) calculated from the Graetz number. These parameters are similar to conditions needed to yield rapidly emplaced terrestrial flows >100 km in length, but the maximum effusion rates necessary on Earth are essentially the minimum for Martian flows. On the basis of our calculated effusion rates, the eruption duration was 3 to 7 Earth months, assuming a constant effusion rate and continuous eruption. The morphology of the Ascraeus Mons flow shows similarities to terrestrial and simulated channeled flows. Downstream changes in morphology resemble those observed in the 1907 flow, Mauna Loa Volcano, Hawaii and channeled polyethylene glycol (PEG) flows. Braided sections of the channel in the Ascraeus Mons flow contain islands which are hundreds of meters across and resemble features observed in the 1907 and 1984 flows on Mauna Loa Volcano. Crosscutting relationships suggest islands in the proximal section were shaped by thermal and mechanical erosion, whereas islands in the medial section are inferred to be material rafted by surges of lava through the channel. Overall, understanding the morphology of long lava flows on Mars is essential to the interpretation of their emplacement and constraining eruption conditions in the saddle regions of the Tharsis volcanoes.

Evidence of water degassing during emplacement and crystallization of 2.7 Ga komatiites from the Agnew-Wiluna greenstone belt, Western Australia

NASA Astrophysics Data System (ADS)

Fiorentini, M. L.; Beresford, S. W.; Stone, W. E.; Deloule, E.

2012-07-01

Komatiites are ancient volcanic rocks, mostly over 2.7 billion years old, which formed through >30% partial melting of the mantle. This study addresses the crucial relationship between volcanology and physical manifestation of primary magmatic water content in komatiites of the Agnew-Wiluna greenstone belt, Western Australia, and documents the degassing processes that occurred during the emplacement and crystallization of these magmas. The Agnew-Wiluna greenstone belt of Western Australia contains three co-genetic komatiite units that (1) display laterally variable volcanological features, including thick cumulates and spinifex-textured units, and (2) were emplaced as both lava flows and intrusions at various locations. Komatiite sills up to 500 m thick contain widespread occurrence of hydromagmatic amphibole in orthocumulate- and mesocumulate-textured rocks, which contain ca. 40-50 wt% MgO and <3 wt% TiO2. Conversely, komatiite flows do not contain any volatile-bearing mineral phases: ~150-m-thick flows only contain vesicles, amygdales and segregation structures, whereas <5-10-m-thick flows lack any textural and petrographic evidence of primary volatile contents. The main results of this study demonstrate that komatiites from the Agnew-Wiluna greenstone belt, irrespective of their initial water content, have degassed upon emplacement, flow and crystallization. More importantly, data show that komatiite flows most likely degassed more water than komatiite intrusions. Komatiite degassing may have indirectly influenced numerous physical and chemical parameters of the water from the primordial oceans and hence indirectly contributed to the creation of a complex zonation at the interface between water and seafloor.

Mineralogy and crystallization history of a highly differentiated REE-enriched hypabyssal rhyolite: Round Top laccolith, Trans-Pecos, Texas

NASA Astrophysics Data System (ADS)

O'Neill, L. Christine; Elliott, Brent A.; Kyle, J. Richard

2017-09-01

The Round Top hypabyssal rhyolite laccolith is a highly evolved magmatic system, enriched in incompatible elements including REE [Rare Earth Element(s)], U, Be, and F. The Round Top intrusion is part of a series of Paleogene intrusions emplaced as the Sierra Blanca Complex. These intrusions are situated within long-lived, complex tectonic regimes that have been subjected to regional compression and subduction, punctuated by extensional bimodal volcanism. The enrichment in the rhyolite that comprises Round Top is the result of the prolonged removal of compatible elements from the source magma chamber through the emplacement of earlier magmatic events. With the emplacement of each sequential laccolith, the F-rich source magma became more enriched in incompatible elements, with increasing HREE [Heavy Rare Earth Elements(s)] concentrations. The emplacement of Round Top as a laccolith (versus that of an extrusive rhyolitic flow) facilitated the retention of the volatile-rich vapor phase within the magma, forming ubiquitous REE-bearing minerals, mainly yttrofluorite and yttrocerite. The high temperature mineral-vapor phase alteration of the feldspar groundmass was essential to the formation of REE minerals, where the pervasive open pore space was occupied by the late-crystallizing minerals. These late-forming REE-bearing minerals also occur as crystals associated with other accessory and trace phases, as inclusions within other phases, along grain boundaries, and along fractures and within voids. The rhyolite at Round Top and other laccolith intrusions in the Sierra Blanca Complex represent a new sub-type of magmatic rare earth element hosting system.

Emplacement of pillow lavas from the ~ 2.8 Ga Chitradurga Greenstone Belt, South India: A physical volcanological, morphometric and geochemical perspective

NASA Astrophysics Data System (ADS)

Duraiswami, Raymond A.; Inamdar, Mustaqueem M.; Shaikh, Tahira N.

2013-08-01

The physical volcanology and morphometric analyses of pillowed lava flows from the Chitradurga basin of Chitradurga Greenstone Belt, South India have been undertaken. In the Chitradurga hills individual pillowed flows alternate with massive submarine sheet flows. The pillows from such flows are separated by chert and occur as spheroidal, elongated or reniform units that are devoid of vesicles, vesicle bands or pipe vesicles. The Mardihalli flow is exposed as a small elongated mound in the basin and consists of a massive core that is draped by pillows along the flow crest and flanks. The pillows from Mardihalli occur as spheroidal to elongate units with smooth, spalled or wrinkled surfaces with vesicular interiors. Repeated budding of larger pillows have produced a series of interconnected pillow units indicating fluid lava that was emplaced on steeply dipping flanks. Based on the morphological features the pillowed flows from the Chitradurga basin were emplaced at low effusion rates (≤ 5 m3/s). Pillows in these flows formed from low viscosity lavas that underwent negligible to moderate inflation due to rapid chilling. Sporadic occurrences of pillow breccias, hyaloclastite and chert breccias in the pillowed flow fields indicate disruption of pillows due to lava surges and slumping. It is envisaged that the Chitradurga basin witnessed distinct episodes of submarine tholeiite eruptions that produced pillowed lavas that variably interacted with sea water to produce geochemistries. The field and stratigraphic relationships of the volcanics and associated clastic sediments suggest that the pillow lavas were emplaced in a shallow marine marginal inter/back arc basin.

Emplacement of rock avalanche material across saturated sediments, Southern Alp, New Zealand

NASA Astrophysics Data System (ADS)

Dufresne, A.; Davies, T. R.; McSaveney, M. J.

2012-04-01

The spreading of material from slope failure events is not only influenced by the volume and nature of the source material and the local topography, but also by the materials encountered in the runout path. In this study, evidence of complex interactions between rock avalanche and sedimentary runout path material were investigated at the 45 x 106 m3 long-runout (L: 4.8 km) Round Top rock avalanche deposit, New Zealand. It was sourced within myolinitic schists of the active strike-slip Alpine Fault. The narrow and in-failure-direction elongate source scarp is deep-seated, indicating slope failure was triggered by strong seismic activity. The most striking morphological deposit features are longitudinal ridges aligned radially to source. Trenching and geophysical surveys show bulldozed and sheared substrate material at ridge termini and laterally displaced sedimentary strata. The substrate failed at a minimum depth of 3 m indicating a ploughing motion of the ridges into the saturated material below. Internal avalanche compression features suggest deceleration behind the bulldozed substrate obstacle. Contorted fabric in material ahead of the ridge document substrate disruption by the overriding avalanche material deposited as the next down-motion hummock. Comparison with rock avalanches of similar volume but different emplacement environments places Round Top between longer runout avalanches emplaced over e.g. playa lake sediments and those with shorter travel distances, whose runout was apparently retarded by topographic obstacles or that entrained high-friction debris. These empirical observations indicate the importance of runout path materials on tentative trends in rock avalanche emplacement dynamics and runout behaviour.

The Structure of the Distant Kuiper Belt in a Nice Model Scenario

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pike, R. E.; Shankman, C. J.; Kavelaars, J. J.

2017-03-01

This work explores the orbital distribution of minor bodies in the outer Solar System emplaced as a result of a Nice model migration from the simulations of Brasser and Morbidelli. This planetary migration scatters a planetesimal disk from between 29 and 34 au and emplaces a population of objects into the Kuiper Belt region. From the 2:1 Neptune resonance and outward, the test particles analyzed populate the outer resonances with orbital distributions consistent with trans-Neptunian object (TNO) detections in semimajor axis, inclination, and eccentricity, while capture into the closest resonances is too efficient. The relative populations of the simulated scatteringmore » objects and resonant objects in the 3:1 and 4:1 resonances are also consistent with observed populations based on debiased TNO surveys, but the 5:1 resonance is severely underpopulated compared to population estimates from survey results. Scattering emplacement results in the expected orbital distribution for the majority of the TNO populations; however, the origin of the large observed population in the 5:1 resonance remains unexplained.« less

WEXFORD containment data report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stubbs, T.; Heinle, R.

The WEXFORD event was detonated in hole U2cr of the Nevada Test Site. A plan view map of the local region of hole U2cr showing the surface projections of the faults and the local drill holes is given. The device had a depth-of-burial of 314 m in the Tunnel Beds tuff of Area 2, about 120 m above the standing water level (SWL). Stemming of the 2.44 m diameter emplacement hole followed the plan. A log of the stemming operations was maintained by Holmes and Narver. Detonation time was 07:45 PDT on August 30, 1984 and about 26 minutes latermore » the chimney collapsed to the surface leaving a small, off-center crater which grew, over several days, until it took on a cookie cutter form encompassing the emplacement hole and having a mean diameter of about 35 m. An interior, highly asymmetric crater had a mean diameter of about 12 m. No functioning monitors detected radiation arrivals in the emplacement hole above a depth of 130 m and the WEXFORD containment was considered successful.« less

Seismic signature of active intrusions in mountain chains.

PubMed

Di Luccio, Francesca; Chiodini, Giovanni; Caliro, Stefano; Cardellini, Carlo; Convertito, Vincenzo; Pino, Nicola Alessandro; Tolomei, Cristiano; Ventura, Guido

2018-01-01

Intrusions are a ubiquitous component of mountain chains and testify to the emplacement of magma at depth. Understanding the emplacement and growth mechanisms of intrusions, such as diapiric or dike-like ascent, is critical to constrain the evolution and structure of the crust. Petrological and geological data allow us to reconstruct magma pathways and long-term magma differentiation and assembly processes. However, our ability to detect and reconstruct the short-term dynamics related to active intrusive episodes in mountain chains is embryonic, lacking recognized geophysical signals. We analyze an anomalously deep seismic sequence (maximum magnitude 5) characterized by low-frequency bursts of earthquakes that occurred in 2013 in the Apennine chain in Italy. We provide seismic evidences of fluid involvement in the earthquake nucleation process and identify a thermal anomaly in aquifers where CO 2 of magmatic origin dissolves. We show that the intrusion of dike-like bodies in mountain chains may trigger earthquakes with magnitudes that may be relevant to seismic hazard assessment. These findings provide a new perspective on the emplacement mechanisms of intrusive bodies and the interpretation of the seismicity in mountain chains.

Seismic signature of active intrusions in mountain chains

PubMed Central

Di Luccio, Francesca; Chiodini, Giovanni; Caliro, Stefano; Cardellini, Carlo; Convertito, Vincenzo; Pino, Nicola Alessandro; Tolomei, Cristiano; Ventura, Guido

2018-01-01

Intrusions are a ubiquitous component of mountain chains and testify to the emplacement of magma at depth. Understanding the emplacement and growth mechanisms of intrusions, such as diapiric or dike-like ascent, is critical to constrain the evolution and structure of the crust. Petrological and geological data allow us to reconstruct magma pathways and long-term magma differentiation and assembly processes. However, our ability to detect and reconstruct the short-term dynamics related to active intrusive episodes in mountain chains is embryonic, lacking recognized geophysical signals. We analyze an anomalously deep seismic sequence (maximum magnitude 5) characterized by low-frequency bursts of earthquakes that occurred in 2013 in the Apennine chain in Italy. We provide seismic evidences of fluid involvement in the earthquake nucleation process and identify a thermal anomaly in aquifers where CO2 of magmatic origin dissolves. We show that the intrusion of dike-like bodies in mountain chains may trigger earthquakes with magnitudes that may be relevant to seismic hazard assessment. These findings provide a new perspective on the emplacement mechanisms of intrusive bodies and the interpretation of the seismicity in mountain chains. PMID:29326978

Infrastructure for deployment of power systems

NASA Technical Reports Server (NTRS)

Sprouse, Kenneth M.

1991-01-01

A preliminary effort in characterizing the types of stationary lunar power systems which may be considered for emplacement on the lunar surface from the proposed initial 100-kW unit in 2003 to later units ranging in power from 25 to 825 kW is presented. Associated with these power systems are their related infrastructure hardware including: (1) electrical cable, wiring, switchgear, and converters; (2) deployable radiator panels; (3) deployable photovoltaic (PV) panels; (4) heat transfer fluid piping and connection joints; (5) power system instrumentation and control equipment; and (6) interface hardware between lunar surface construction/maintenance equipment and power system. This report: (1) presents estimates of the mass and volumes associated with these power systems and their related infrastructure hardware; (2) provides task breakdown description for emplacing this equipment; (3) gives estimated heat, forces, torques, and alignment tolerances for equipment assembly; and (4) provides other important equipment/machinery requirements where applicable. Packaging options for this equipment will be discussed along with necessary site preparation requirements. Design and analysis issues associated with the final emplacement of this power system hardware are also described.

Thermally-assisted Magma Emplacement Explains Restless Calderas.

PubMed

Amoruso, Antonella; Crescentini, Luca; D'Antonio, Massimo; Acocella, Valerio

2017-08-11

Many calderas show repeated unrest over centuries. Though probably induced by magma, this unique behaviour is not understood and its dynamics remains elusive. To better understand these restless calderas, we interpret deformation data and build thermal models of Campi Flegrei caldera, Italy. Campi Flegrei experienced at least 4 major unrest episodes in the last decades. Our results indicate that the inflation and deflation of magmatic sources at the same location explain most deformation, at least since the build-up of the last 1538 AD eruption. However, such a repeated magma emplacement requires a persistently hot crust. Our thermal models show that this repeated emplacement was assisted by the thermal anomaly created by magma that was intruded at shallow depth ~3 ka before the last eruption. This may explain the persistence of the magmatic sources promoting the restless behaviour of the Campi Flegrei caldera; moreover, it explains the crystallization, re-melting and mixing among compositionally distinct magmas recorded in young volcanic rocks. Our model of thermally-assisted unrest may have a wider applicability, possibly explaining also the dynamics of other restless calderas.

Subduction initiation, recycling of Alboran lower crust, and intracrustal emplacement of subcontinental lithospheric mantle in the Westernmost Mediterranean

NASA Astrophysics Data System (ADS)

Varas-Reus, María Isabel; Garrido, Carlos J.; Bosch, Delphine; Marchesi, Claudio; Hidas, Károly; Booth-Rea, Guillermo; Acosta-Vigil, Antonio

2015-04-01

Unraveling the tectonic settings and processes involved in the annihilation of subcontinental mantle lithosphere is of paramount importance for our understanding of the endurance of continents through Earth history. Unlike ophiolites -- their oceanic mantle lithosphere counterparts -- the mechanisms of emplacement of the subcontinental mantle lithosphere in orogens is still poorly known. The emplacement of subcontinental lithospheric mantle peridotites is often attributed to extension in rifted passive margins or continental backarc basins, accretionary processes in subduction zones, or some combination of these processes. One of the most prominent features of the westernmost Mediterranean Alpine orogenic arcs is the presence of the largest outcrops worldwide of diamond facies, subcontinental mantle peridotite massifs; unveiling the mechanisms of emplacement of these massifs may provide important clues on processes involved in the destruction of continents. The western Mediterranean underwent a complex Alpine evolution of subduction initiation, slab fragmentation, and rollback within a context of slow convergence of Africa and Europe In the westernmost Mediterranean, the alpine orogeny ends in the Gibraltar tight arc, which is bounded by the Betic, Rif and Tell belts that surround the Alboran and Algero-Balearic basins. The internal units of these belts are mostly constituted of an allochthonous lithospheric domain that collided and overthrusted Mesozoic and Tertiary sedimentary rocks of the Mesozoic-Paleogene, South Iberian and Maghrebian rifted continental paleomargins. Subcontinental lithospheric peridotite massifs are intercalated between polymetamorphic internal units of the Betic (Ronda, Ojen and Carratraca massifs), Rif (Beni Bousera), and Tell belts. In the Betic chain, the internal zones of the allochthonous Alboran domain include, from bottom to top, polymetamorphic rock of the Alpujarride and Malaguide complexes. The Ronda peridotite massif -- the largest outcrop (> 300 km2) of subcontinental lithospheric mantle peridotite in westernmost Mediterranean -- occurs at the basal units of the western Alpujarride. Late, intrusive mantle, high-Mg pyroxenite dykes in the Ronda peridotite (Betic Cordillera, S. Spain) show geochemical signature akin to high-pressure (> 1 GPa) segregates of high-Mg andesite and boninite found in island arc terrains and ophiolite, where they usually witness nascent subduction and/or oceanic accretion in a forearc setting. These pyroxenites point to a suprasubduction environment prior to the intracrustal emplacement of subcontinental peridotites drawing some parallels between the crustal emplacement environment of some ophiolites and that of sublithospheric mantle in the westernmost Mediterranean. Here, we present new Sr-Nd-Pb-isotopic data from a variety of crustal rocks that might account for the crustal components seen in high-Mg Ronda pyroxenites. This data allows the origin of this crustal component to be unveiled, providing fundamentally constraints on the processes involved in the emplacement of large massifs of subcontinental mantle lithosphere in the westernmost Mediterranean. In order to test the hypothesis that the crustal component in Ronda high-Mg pyroxenites was acquired during the Alpine evolution of the Betic-Rif orogen, we selected samples from crustal sections that might have been underthrusted beneath the Alboran lithospheric mantle before the putative Miocene intra-crustal emplacement of peridotites. Samples are from the western Betics and comprise sediments from the Gibraltar Arc Flysch Trough units, which forms a fold-and-thrust belt between the Iberian paleomargin and the allochthonous Alboran domain, and metasedimentary rocks from the Jubrique and Blanca units of the Alpujarride complex, which underlie and overlie the Ronda peridotite and constitute the crustal section of the Alboran lithosphere domain to which the Ronda peridotite pertains. Sr-Nd-Pb systematic of sediments strongly support Alboran geodynamic models that envisage slab roll-back as the tectonic mechanism responsible for Miocene lithospheric thinning, and consistent with a scenario where back-arc inversion leading to subduction initiation of crustal units at the front of the Alboran wedge

Geochronology of Cenozoic rocks in the Bodie Hills, California and Nevada

USGS Publications Warehouse

Fleck, Robert J.; du Bray, Edward A.; John, David A.; Vikre, Peter G.; Cosca, Michael A.; Snee, Lawrence W.; Box, Stephen E.

2015-01-01

Four trachyandesite stratovolcanoes developed along the margins of the volcanic field and numerous silicic trachyandesite to rhyolite flow dome complexes erupted more centrally. Volcanism in the Bodie Hills volcanic field peaked at two periods, ~15.0 to 12.6 million years before present (Ma) and ~9.9 to 8.0 Ma, which were dominated by emplacement of large stratovolcanoes and large silicic trachyandesite-dacite lava domes, respectively. A final period of small-volume silicic dome emplacement began in the western part of the volcanic field at ~6 Ma and culminated at ~5.5 Ma (John and others, 2012).

Determining the Compositions of Extraterrestrial Lava Flows

NASA Technical Reports Server (NTRS)

Fink, Jonathan H.

2002-01-01

The primary purpose of this research project has been to develop techniques that allow the emplacement conditions of volcanic landforms on other planets to be related to attributes that can be remotely detected with available instrumentation. The underlying assumption of our work is that the appearance of a volcano, lava flow, debris avalanche, or exhumed magmatic intrusion can provide clues about the conditions operating when that feature was first emplaced. Magma composition, amount of crustal heat flow, state of tectonic stress, and climatic conditions are among the important variables that can be inferred from the morphology and texture of an igneous body.

Controlled directional scattering cavity for tubular absorbers

DOEpatents

Winston, Roland

1982-01-01

A specular cavity is provided in which an optical receiver is emplaced. The cavity is provided with a series of V groove-like indentations (or pyramidal-type indentations) which redirect energy entering between the receiver and cavity structure onto the receiver. The aperture opening of each V groove is less than half the cavity opening and in most preferred embodiments, much less than half. This enables the optical receiver to be emplaced a distance g from the cavity wherein 0.414r

Tilting, burial, and uplift of the Guadalupe Igneous Complex, Sierra Nevada, California

USGS Publications Warehouse

Haeussler, Peter J.; Paterson, Scott R.

1993-01-01

It is often incorrectly assumed that plutons have a relatively uneventful structural history after emplacement. The 151 Ma Guadalupe Igneous Complex (GIC) in the Foothills Terrane, California, was involved in three post-emplacement events: (1) ∼30° of southwestside-up tilting during ductile regional faulting and contraction, (2) burial of the pluton from ∼4 to 12 km during crustal thickening of the wall rocks, and (3) uplift with only minor tilting in the Late Cretaceous. Tilting of the pluton is indicated by (1) southwest to northeast gradational changes from layered gabbros and diorites to granites and granophyres; (2) northeastward dips of layering in gabbro, internal contacts, and bedding of overlying coeval(?) volcanic rocks; (3) northeastward decrease in wall-rock metamorphic grade; and (4) paleomagnetic data from 14 localities across the pluton. We argue that tilting occurred between 146-135 Ma during southwest-northeast-directed regional contraction. This contraction is indicated by widespread folds and cleavages and by reverse motion on the Bear Mountains fault zone (BMFZ), a large northeast-dipping shear zone that bounds the GIC on its southwest side. Burial of the GIC, which overlapped in time but outlasted tilting, is suggested by (1) post-emplacement contractional faulting, folding, and cleavage development; (2) analyses of strains associated with widespread cleavage that indicate vertical thickening of ∼100% and (3) microstructural and mineral assemblage data that indicate shallow emplacement of the GIC, in contrast to mineral assemblage and limited geobarometric data from adjacent 120-110 Ma plutons that indicate moderate emplacement levels. Late Cretaceous uplift is indicated by 95-75 Ma sedimentary rocks that unconformably overlie the 120-110 Ma plutons.This geologic history is interesting for several reasons. First, although the GIC participated in extensive post-emplacement deformation, it lacks internal structural evidence of these events, except locally along the Bear Mountains fault zone. Second, the agreement between paleomagnetic and structural evidence for tilting suggests that no large latitudinal displacement of the GIC is required. Third, the paleomagnetic data also help to define the geometry of the magma chamber now represented by the GIC. Lack of streaking of paleomagnetic site-mean directions demonstrates that the pluton acted as a single unit after cooling through the blocking temperature (450-560 °C) of low-titanium titanomagnetite; however, variations in the dip of internal layering and contacts, from 70° at the base to 30° near the top of the pluton, indicate that not all of these features were horizontal and planar when they formed. We propose that this variation in dip of layering is most consistent with sidewall crystallization of magma resulting in drape of layering along the walls of the intrusion. Therefore, internal layering within this pluton does not record paleohorizontal.

Geochronological, geochemical and mineralogical constraints of emplacement depth of TTG suite from the Sinassi Batholith in the Central African Fold Belt (CAFB) of northern Cameroon: Implications for tectonomagmatic evolution

NASA Astrophysics Data System (ADS)

Houketchang Bouyo, M.; Penaye, J.; Njel, U. O.; Moussango, A. P. I.; Sep, J. P. N.; Nyama, B. A.; Wassouo, W. J.; Abaté, J. M. E.; Yaya, F.; Mahamat, A.; Ye, Hao; Wu, Fei

2016-04-01

The Sinassi Batholith in the Central African Fold Belt (CAFB) of northern Cameroon represents the largest volume of plutonic rocks or granitoids massif of the Western Cameroonian Domain. It is made up dominantly of tonalite-trondhjemite-granodiorite (TTG) suite and lesser granite which are locally more or less deformed, and composed of varying proportions of quartz, plagioclase, K-feldspar, biotite, hornblende, sphene, magnetite, apatite and zircon. Major and trace element compositions of fifteen rock samples of granitoids (Djourdé granodiorite, Sinassi quartz diorite and orthogneisses groups) indicate that investigated rocks from the Sinassi Batholith are characterized by medium- to high-K calc-alkaline affinity and metaluminous I-type signature. In addition, their chondrite- and primitive mantle-normalized trace element patterns are strongly fractionated ((La/Yb)N = 2.96-61.40) and show respectively enrichment in LREE relative to HREE and enrichment in LILE compared to HFSE with moderate to slight negative Nb-Ta, Ti and Eu anomalies consistent with a continental magmatic arc setting related to a subduction zone. Geothermobarometric calculations using hornblende-plagioclase thermometry and aluminum-in-hornblende barometry on eleven rock samples indicate that plutons from Sinassi Batholith were emplaced at average temperatures and pressures ranging between 698 and 720 °C and 4.06-5.82 kbar (Djourdé granitoids), 698-728 °C and 4.04-5.34 kbar (Sinassi granitoids) and 667-670 and 4.23-4.76 kbar (orthogneisses group) respectively. The average emplacement depths estimates for the investigated granitoids is constrained at ca 16-18 km, indicating that at least 16 km of crustal rocks of the Sinassi Batholith must have been eroded or uplifted at approximately exhumation rates of 0.08-0.10 mm/year. Regardless of their Th/U ratios, geochronological results highlight three main events characterizing the Neoproterozoic tectonomagmatic evolution within the Sinassi Batholith at the northern margin of CAFB of northern Cameroon: (1) inherited magmatic sources ranging from one group to another at ca 692, 713, 722, 746 and 772 Ma; (2) successive emplacement ages at ca 670-686 Ma (orthogneisses group), ca 661-666 Ma (synchronous emplacement of the Djourdé and Sinassi groups) and ca 644 Ma (emplacement age of eyespots quartz diorite in the Sinassi group); and (3) post-magmatic alteration or metamorphism at ca 600 Ma. Correlations with the neighboring Mayo Kebbi Batholith in southwestern Chad show geochemical and geochronological similarities, demonstrating that the Sinassi and Mayo Kebbi granitoids beyond political boundaries are parts of a unique Sinassi-Mayo Kebbi Batholith witnessing a Neoproterozoic subduction-related continental magmatic arc setting of Andean-type.

Geochronological Constraints on the Exhumation and Emplacement of Subcontinental Lithospheric Mantle Peridotites in the Westernmost Mediterranean

NASA Astrophysics Data System (ADS)

Garrido, Carlos J.; Hidas, Károly; Marchesi, Claudio; Varas-Reus, María Isabel; Booth-Rea, Guillermo

2017-04-01

Exhumation of subcontinental mantle peridotite in the Western Mediterranean has been attributed to different tectonic processes including pure extension, transpression, or alternating contractive and extensional processes related with continental subduction followed by extension, before final their contractive intracrustal emplacement. Any model trying to explain the exhumation and emplacement of subcontinental lithospheric mantle peridotites in the westernmost Mediterranean should take into account the available geochronological constraints, as well as the petrological and geochemical processes that lead to internal tectono-magmatic zoning so characteristic of the Betic and Rif orogenic peridotites. Different studies have suggested a Hercynian, Cenozoic-Mesozoic or an Alpine age for the late tectono-magmatic evolution and intra-crustal emplacement of Betic-Rif peridotites. The pervasive presence of Mesozoic U-Pb zircon ages in Ronda UHP and HP garnet pyroxenites does not support a Hercynian age for the intracrustal emplacement of the peridotite. A hyper-extended margin setting for is in good agreement with the Jurassic extensional event that pervasively affected ALKAPECA terrains (i.e. the Alboran, Kabylides, Peloritani, and Calabria domains) in the western Mediterranean due to the opening of the Piemonte-Ligurian Ocean. However, a Jurassic age and a passive margin tectonic setting do not account, among other observations, for the late Miocene thermochronological ages recorded in zircons rims (U-Pb) and garnets (Lu-Hf) in garnet pyroxenites from the Betic-Rif peridotites, the pervasive Miocene resetting of U-Pb zircon and monazite ages in the overlying Jubrique crustal section, the supra-subduction radiogenic signature of late pyroxenite intrusive dikes in the Ronda peridotite, and the arc tholeiitic affinity of late mantle-derived, gabbroic dykes intruding in the Ronda and Ojen plagioclase lherzolites. These data are more consistent with a supra-subduction backarc setting for the Paleocene Alpine evolution of the Alboran peridotite massifs due to slab rollback in the westernmost Mediterranean. Several geodynamic models have proposed initial south directed migration of the orogenic arc in a more easterly position (south of the Balearic Islands) during the Paleogene before the closure of the Paleo-Tethys Ocean and collision with the Algerian margin. This early emplacement for the Ronda Peridotite (approx. 25-23 Ma) in such an easterly position would provide a common origin for the peridotite bodies found in the Kabylies in Algeria, and in the Betics-Rif. We propose that after thinning and extension in a back-arc setting recorded in the Ronda spinel tectonite domain and the recrystallization front, the final Miocene exhumation of Ronda Peridotite is associated with early folding and later but probably synkinematic shearing of the SCLM in a contractive geodynamic setting. This process is recorded in the low-pressure plagioclase tectonite domain of the Ronda peridotite and the supra-subduction bonititic affinity of late intrusive pyroxenites.

Growth of plutons by incremental emplacement of sheets in crystal-rich host: Evidence from Miocene intrusions of the Colorado River region, Nevada, USA

NASA Astrophysics Data System (ADS)

Miller, Calvin F.; Furbish, David J.; Walker, Barry A.; Claiborne, Lily L.; Koteas, G. Christopher; Bleick, Heather A.; Miller, Jonathan S.

2011-03-01

Growing evidence supports the notion that plutons are constructed incrementally, commonly over long periods of time, yet field evidence for the multiple injections that seem to be required is commonly sparse or absent. Timescales of up to several million years, among other arguments, indicate that the dominant volume does not remain largely molten, yet if growing plutons are constructed from rapidly solidifying increments it is unlikely that intrusive contacts would escape notice. A model wherein magma increments are emplaced into melt-bearing but crystal-rich host, rather than either solid or crystal-poor material, provides a plausible explanation for this apparent conundrum. A partially solidified intrusion undoubtedly comprises zones with contrasting melt fraction and therefore strength. Depending on whether these zones behave elastically or ductilely in response to dike emplacement, intruding magma may spread to form sheets by either of two mechanisms. If the melt-bearing host is elastic on the relevant timescale, magma spreads rather than continuing to propagate upward, where it encounters a zone of higher rigidity (higher crystal fraction). Similarly, if the dike at first ascends through rigid, melt-poor material and then encounters a zone that is weak enough (poor enough in crystals) to respond ductilely, the ascending material will also spread because the dike tip ceases to propagate as in rigid material. We propose that ascending magma is thus in essence trapped, by either mechanism, within relatively crystal-poor zones. Contacts will commonly be obscure from the start because the contrast between intruding material (crystal-poorer magma) and host (crystal-richer material) is subtle, and they may be obscured even further by subsequent destabilization of the crystal-melt framework. Field evidence and zircon zoning stratigraphy in plutons of the Colorado River region of southern Nevada support the hypothesis that emplacement of magma replenishments into a crystal-laden host is important in pluton construction. The dominant granite unit of the Spirit Mountain batholith displays only subtle internal contacts. However, ages and elemental zoning in zircons demonstrate a protracted history of almost 2 million years, major fluctuations in T and host melt chemistry, and mixing of strongly contrasting populations of magmatic zircon in single samples. We interpret this to reflect reactivation of rigid sponge and mush and entrainment of earlier-formed crystals, and we infer that this was in response to granitic replenishment. Much of the smaller Aztec Wash pluton comprises interlayered cumulate-textured quartz monzonite and mafic sheets. The latest phase of pluton emplacement is marked by numerous thick, fine-grained granite "sills" that intruded the subhorizontal quartz monzonite sheets. Contacts between granite and quartz monzonite are "soft," highly irregular on cm-dm scale with coarse xenocrysts from the quartz monzonite entrained in the fine-grained granite. We interpret the granite replenishments to have spread laterally within crystal-rich, melt-bearing quartz monzonite beneath rigid mafic sheets. In this case, clear evidence for the emplacement process is fortuitously preserved because the granite was emplaced in the waning stage of the thermal lifetime of the pluton, and because the mafic sheets enhance the strength contrast and make the geometry more visible. Similar "sills" of fine-grained granite were also preserved during the late stages of the history of the Spirit Mountain batholith.

Lavas and Sills in the Ferrar Large Igneous Province: Field and Geochemical Evidence for the Order of Emplacement.

NASA Astrophysics Data System (ADS)

Elliot, D. H.; Fleming, T. H.

2005-12-01

Many large igneous provinces, particularly those associated with Gondwana break-up, include major sill complexes as well as flood basalt fields. In the Ferrar province, radiometric dates of lavas and sills are indistinguishable. Nevertheless, in north Victoria Land (NVL) field evidence suggests the lavas had to have been erupted first in order to create the overburden needed for emplacement at shallow depths of thick sills, lacking vesicles, in a thin (100 m) Upper Triassic sedimentary sequence overlying basement. Elsewhere in the Transantarctic Mountains sills occur almost exclusively in a thick (2-2.5 km) Devonian-Triassic sedimentary sequence (Beacon Supergroup) that was possibly capped by 500+m of lavas before sill emplacement. For south Victoria Land (SVL), Marsh (2004) proposed that the most evolved rocks were erupted first as lavas, and sills were emplaced at progressively greater depth as increasingly more magnesian magmas and crystal mushes were injected into supracrustal and finally basement rocks. In NVL most lavas have MgO between 6-8% with a few as low as 4.5% MgO, whereas analyzed chilled margins of sills range from 3.7-5.6% MgO. In the Prince Albert Mountains (PAM), SVL, lava and sill compositions overlap (3.9-7.3% MgO). In the greater Dry Valleys region (SVL) lavas at Carapace Nunatak range from 3.6-6.7% MgO; chilled margins of Dry Valleys sills range from about 4.2 to 7.2% MgO. In the Queen Alexandra Range, central Transantarctic Mountains (CTM), lavas are predominantly 2.6-5.7% MgO; sills in the region range from 4.5% to 10.7% MgO. In the Otway Massif region (head of the Shackleton Glacier, CTM) most lavas are strongly evolved (2.7-3.4% MgO); sills in the Shackleton Glacier region range from 4.3-7.3% MgO. Nowhere do lavas show unequivocal systematic temporal change in MgO, and notably in CTM the initial flows are the most mafic (7.5-8.0% MgO). Olivine dolerite sills (chilled margins: -9% MgO) tend to occur low in the stratigraphic section. Except for NVL where Beacon strata exposures are limited, sills are thicker (100-200 m) and more regular in lower stratigraphic levels. Sills with orthopyroxene crystal-mush tongues are not known outside the Dry Valleys except perhaps the Warren Range (SVL). No province-wide systematic relationship is apparent between compositions of lavas and sill chilled margins. Nevertheless, in CTM most lavas are significantly more evolved than the sills; within the sills there is no clear relationship between MgO and stratigraphy, and some less evolved compositions occur at relatively high stratigraphic levels. In SVL compositional overlap is almost complete; locally, cross-cutting relations show more mafic sills and sheets cutting less mafic compositions. In NVL the chemical relations between lavas and sills are opposite from those that have been advocated for SVL. Interpretation is compounded by sills that exchange stratigraphic position or climb stratigraphically. Factors affecting magma emplacement include magma density, lithostatic pressure, overpressures required for lateral emplacement, and rock physical properties; when and where the evolving source was tapped may play an equal role in the emplacement order. Further, detailed work on the sills will show whether crystallization might have yielded lower density residual liquids that could have migrated and formed distal fingers of sills or migrated to higher stratigraphic levels.

Growth of plutons by incremental emplacement of sheets in crystal-rich host: Evidence from Miocene intrusions of the Colorado River region, Nevada, USA

USGS Publications Warehouse

Miller, C.F.; Furbish, D.J.; Walker, B.A.; Claiborne, L.L.; Koteas, G.C.; Bleick, H.A.; Miller, J.S.

2011-01-01

Growing evidence supports the notion that plutons are constructed incrementally, commonly over long periods of time, yet field evidence for the multiple injections that seem to be required is commonly sparse or absent. Timescales of up to several million years, among other arguments, indicate that the dominant volume does not remain largely molten, yet if growing plutons are constructed from rapidly solidifying increments it is unlikely that intrusive contacts would escape notice. A model wherein magma increments are emplaced into melt-bearing but crystal-rich host, rather than either solid or crystal-poor material, provides a plausible explanation for this apparent conundrum. A partially solidified intrusion undoubtedly comprises zones with contrasting melt fraction and therefore strength. Depending on whether these zones behave elastically or ductilely in response to dike emplacement, intruding magma may spread to form sheets by either of two mechanisms. If the melt-bearing host is elastic on the relevant timescale, magma spreads rather than continuing to propagate upward, where it encounters a zone of higher rigidity (higher crystal fraction). Similarly, if the dike at first ascends through rigid, melt-poor material and then encounters a zone that is weak enough (poor enough in crystals) to respond ductilely, the ascending material will also spread because the dike tip ceases to propagate as in rigid material. We propose that ascending magma is thus in essence trapped, by either mechanism, within relatively crystal-poor zones. Contacts will commonly be obscure from the start because the contrast between intruding material (crystal-poorer magma) and host (crystal-richer material) is subtle, and they may be obscured even further by subsequent destabilization of the crystal-melt framework. Field evidence and zircon zoning stratigraphy in plutons of the Colorado River region of southern Nevada support the hypothesis that emplacement of magma replenishments into a crystal-laden host is important in pluton construction. The dominant granite unit of the Spirit Mountain batholith displays only subtle internal contacts. However, ages and elemental zoning in zircons demonstrate a protracted history of almost 2 million years, major fluctuations in T and host melt chemistry, and mixing of strongly contrasting populations of magmatic zircon in single samples. We interpret this to reflect reactivation of rigid sponge and mush and entrainment of earlier-formed crystals, and we infer that this was in response to granitic replenishment. Much of the smaller Aztec Wash pluton comprises interlayered cumulate-textured quartz monzonite and mafic sheets. The latest phase of pluton emplacement is marked by numerous thick, fine-grained granite "sills" that intruded the subhorizontal quartz monzonite sheets. Contacts between granite and quartz monzonite are "soft," highly irregular on cm-dm scale with coarse xenocrysts from the quartz monzonite entrained in the fine-grained granite. We interpret the granite replenishments to have spread laterally within crystal-rich, melt-bearing quartz monzonite beneath rigid mafic sheets. In this case, clear evidence for the emplacement process is fortuitously preserved because the granite was emplaced in the waning stage of the thermal lifetime of the pluton, and because the mafic sheets enhance the strength contrast and make the geometry more visible. Similar "sills" of fine-grained granite were also preserved during the late stages of the history of the Spirit Mountain batholith. ?? 2009 Elsevier B.V.

Emplacement of the Rocche Rosse rhyolite lava flow (Lipari, Aeolian Islands)

NASA Astrophysics Data System (ADS)

Bullock, Liam A.; Gertisser, Ralf; O'Driscoll, Brian

2018-05-01

The Rocche Rosse lava flow marks the most recent rhyolitic extrusion on Lipari island (Italy), and preserves evidence for a multi-stage emplacement history. Due to the viscous nature of the advancing lava (108 to 1010 Pa s), indicators of complex emplacement processes are preserved in the final flow. This study focuses on structural mapping of the flow to highlight the interplay of cooling, crust formation and underlying slope in the development of rhyolitic lavas. The flow is made up of two prominent lobes, small (< 0.2 m) to large (> 0.2 m) scale folding and a channelled geometry. Foliations dip at 2-4° over the flatter topography close to the vent, and up to 30-50° over steeper mid-flow topography. Brittle faults, tension gashes and conjugate fractures are also evident across flow. Heterogeneous deformation is evident through increasing fold asymmetry from the vent due to downflow cooling and stagnation. A steeper underlying topography mid-flow led to development of a channelled morphology, and compression at topographic breaks resulted in fold superimposition in the channel. We propose an emplacement history that involved the evolution through five stages, each associated with the following flow regimes: (1) initial extrusion, crustal development and small scale folding; (2) extensional strain, stretching lineations and channel development over steeper topography; (3) compression at topographic break, autobrecciation, lobe development and medium scale folding; (4) progressive deformation with stagnation, large-scale folding and re-folding; and (5) brittle deformation following flow termination. The complex array of structural elements observed within the Rocche Rosse lava flow facilitates comparisons to be made with actively deforming rhyolitic lava flows at the Chilean volcanoes of Chaitén and Cordón Caulle, offering a fluid dynamic and structural framework within which to evaluate our data.

Emplacement temperatures of the November 22, 1994 nuee ardente deposits, Merapi Volcano, Java

USGS Publications Warehouse

Voight, B.; Davis, M.J.

2000-01-01

A study of emplacement temperatures was carried out for the largest of the 22 November 1994 nuée ardente deposits at Merapi Volcano, based mainly on the response of plastic and woody materials subjected to the hot pyroclastic current and the deposits, and to some extent on eyewitness observations. The study emphasizes the Turgo–Kaliurang area in the distal part of the area affected by the nuée ardente, where nearly 100 casualties occurred. The term nuée ardente as used here includes channeled block-and-ash flows, and associated ash-clouds of surge and fallout origins. The emplacement temperature of the 8 m thick channeled block-and-ash deposit was relatively high, ∼550°C, based mainly on eyewitness reports of visual thermal radiance. Emplacement temperatures for ash-cloud deposits a few cm thick were deduced from polymer objects collected at Turgo and Kaliurang. Most polymers do not display a sharp melting range, but polyethylene terephthalate used in water bottles melts between 245 and 265°C, and parts of the bottles that had been deformed during fabrication molding turn a milky color at 200°C. The experimental evidence suggests that deposits in the Turgo area briefly achieved a maximum temperature near 300°C, whereas those near Kaliurang were <200°C. Maximum ash deposit temperatures occurred in fallout with a local source in the channeled block-and-ash flow of the Boyong river valley; the surge deposit was cooler (∼180°C) due to entrainment of cool air and soils, and tree singe-zone temperatures were around 100°C.

Validating Cellular Automata Lava Flow Emplacement Algorithms with Standard Benchmarks

NASA Astrophysics Data System (ADS)

Richardson, J. A.; Connor, L.; Charbonnier, S. J.; Connor, C.; Gallant, E.

2015-12-01

A major existing need in assessing lava flow simulators is a common set of validation benchmark tests. We propose three levels of benchmarks which test model output against increasingly complex standards. First, imulated lava flows should be morphologically identical, given changes in parameter space that should be inconsequential, such as slope direction. Second, lava flows simulated in simple parameter spaces can be tested against analytical solutions or empirical relationships seen in Bingham fluids. For instance, a lava flow simulated on a flat surface should produce a circular outline. Third, lava flows simulated over real world topography can be compared to recent real world lava flows, such as those at Tolbachik, Russia, and Fogo, Cape Verde. Success or failure of emplacement algorithms in these validation benchmarks can be determined using a Bayesian approach, which directly tests the ability of an emplacement algorithm to correctly forecast lava inundation. Here we focus on two posterior metrics, P(A|B) and P(¬A|¬B), which describe the positive and negative predictive value of flow algorithms. This is an improvement on less direct statistics such as model sensitivity and the Jaccard fitness coefficient. We have performed these validation benchmarks on a new, modular lava flow emplacement simulator that we have developed. This simulator, which we call MOLASSES, follows a Cellular Automata (CA) method. The code is developed in several interchangeable modules, which enables quick modification of the distribution algorithm from cell locations to their neighbors. By assessing several different distribution schemes with the benchmark tests, we have improved the performance of MOLASSES to correctly match early stages of the 2012-3 Tolbachik Flow, Kamchakta Russia, to 80%. We also can evaluate model performance given uncertain input parameters using a Monte Carlo setup. This illuminates sensitivity to model uncertainty.

Upper crustal emplacement and deformation of granitoids inside the Uppermost Unit of the Cretan nappe stack: constraints from U-Pb zircon dating, microfabrics and paleostress analyses

NASA Astrophysics Data System (ADS)

Kneuker, Tilo; Dörr, Wolfgang; Petschick, Rainer; Zulauf, Gernold

2015-03-01

The present study is dealing with the emplacement and deformation of diorite and quartz diorite exposed along new road cuts between Agios Nikolaos and Sitia (Uppermost Unit, eastern Crete). Mingling of both melt types is indicated by enclaves of diorite inside quartz diorite and vice versa. The diorite and quartz diorite intruded into coarse-grained white marble, which is in lateral contact to, but also forms the roof of, the intrusive body. Evidence for contact metamorphism is indicated by increasing grain size of calcite in the marble with decreasing distance from the diorite. U-Pb (TIMS) dating of zircons, separated from quartz diorite, yielded a concordant age at 74.0 ± 0.25 Ma, which is interpreted as emplacement age. As this age is close to published K-Ar cooling ages of hornblende and biotite, the melt should have intruded and cooled down rapidly at upper structural levels, which is not common for granitoids of the Uppermost Unit of Crete. Upper crustal melt emplacement is also documented by stoped blocks and by the lack of any ductile (viscous) deformation. The diorite and quartz diorite, however, are affected by strong post-Oligocene brittle faulting. Paleostress analysis, based on these faults, revealed a change in stress field from N-S and NNW-SSE shortening by thrusting (convergence between African and European plates) to NNE-SSW and NE-SW shortening accommodated by strike-slip (SW-ward extrusion of the Anatolian microplate). Calcite-twin density indicates high differential stress (260 ± 20 MPa) related to these phases of crustal shortening.

Effects of Plinian Eruptions of Somma-vesuvius On People, Animals, Structures and Objects: Inferences From Avellino (3760 Yr B.p.) and Pompei (79 A.d.) Events.

NASA Astrophysics Data System (ADS)

Mastrolorenzo, G.; Petrone, P. P.; Geraci, G.; Guarino, F.; Incoronato, A.

An interdisciplinary approach to the archaeological sites affected by Avellino (3750 yr. B.P.) and Pompei (79 A.D.) plinian eruptions of Somma-Vesuvius provides new data relative to the depositional mechanisms. Large scale stratigraphy and local evi- dences provide new informations about the physical conditions at the emplacement of PDCs and their effects on structures, people and environment. Field evidences indicate that fine grained pyroclastic deposits related to the column collapses propagate up to a distance of about 15 km from the crater and emplaced with conspicuous thickness. In both Avellino and Pompei eruptions, direct evidences from archaeological sites in- dicate that the emplacement in intermediate and distal areas was relatively quite (low mechanical energy). The recognition of thin, continuous, fine grained surge deposits up to a distance of ca. 15 km from the crater suggests that turbulence was important and the PDCs advanced as a relatively thick dilute current, very poorly controlled by the topography. Furthermore, due to the very small sizes, the particles were always transported in suspension, even at very low current velocity, thus avoiding vertical grading to occur. However, due to the very high depositional mass rate, the emplace- ment was very rapid causing buildings and hut, objects, animals and people to be engulfed within the ash deposits thus preserving their original position, as seen at Herculaneum, Oplontis, Pompeii (79 AD) and Nola (3760 bp). The skeletons of hu- man as well animal victims show high temperature effects. In particular, microscopic bones texture of the victims in the sites affected by the 79 A.D are consistent with very high temperatures, which are anomalous in pyroclastic surge clouds.

Multiple Emplacement and Exhumation History of the Late Mesozoic Dayunshan-Mufushan Batholith in Southeast China and Its Tectonic Significance: 1. Structural Analysis and Geochronological Constraints

NASA Astrophysics Data System (ADS)

Ji, Wenbin; Faure, Michel; Lin, Wei; Chen, Yan; Chu, Yang; Xue, Zhenhua

2018-01-01

The South China Block (SCB) experienced a polyphase reworking by the Phanerozoic tectonothermal events. To better understand its Late Mesozoic tectonics, an integrated multidisciplinary investigation has been conducted on the Dayunshan-Mufushan composite batholith in the north-central SCB. This batholith consists of two major intrusions that recorded distinct emplacement features. According to our structural analysis, two deformation events in relation to batholith emplacement and subsequent exhumation are identified. The early one (D1) was observed mostly at the southern border of the batholith, characterized by a top-to-the-SW ductile shearing in the early-stage intrusion and along its contact zone. This deformation, chiefly associated with the pluton emplacement at ca. 150 Ma, was probably assisted by farfield compression from the northern Yangtze foreland belt. The second but main event (D2) involved two phases: (1) ductile shearing (D2a) prominently expressed along the Dayunshan detachment fault at the western border of the batholith where the syntectonic late-stage intrusion and minor metasedimentary basement in the footwall suffered mylonitization with top-to-the-NW kinematics; and (2) subsequent brittle faulting (D2b) further exhumed the entire batholith that behaved as rift shoulder with half-graben basins developed on its both sides. Geochronological constraints show that the crustal ductile extension occurred during 132-95 Ma. Such a Cretaceous NW-SE extensional tectonic regime, as indicated by the D2 event, has been recognized in a vast area of East Asia. This tectonism was responsible not only for the destruction of the North China craton but also for the formation of the so-called "southeast China basin and range tectonics."

Structure of the Castillo granite, Southwest Spain: Variscan deformation of a late Cadomian pluton

NASA Astrophysics Data System (ADS)

EguíLuz, L.; Apraiz, A.; ÁBalos, B.

1999-12-01

A geometrical reconstruction of the 500 Ma old Castillo granite pluton (SW Iberia) is completed on the basis of structural and geophysical (rock magnetism) techniques. The pluton is intrusive into latest Proterozoic-earliest Cambrian metasediments and conforms a tabular intrusion 6 km in diameter and 1.7 km thick that was emplaced at a depth of 10 km. Its magnetic fabric reveals that the strike of moderately to steeply dipping magmatic flow planes forms a high angle to the regional tectonic trends. Magnetic foliations and associated moderately to gently plunging magnetic lineations represent magmatic flow planes and directions. The internal anisotropy of the granite together with the structure shown by the country rocks attest the lateral propagation of the pluton and its latter inflation. The pluton's root zone would correspond to a likely thin, subvertical feeder structure initiated near the orientation of regional σ1 at the time of emplacement. During the Variscan orogeny the pluton was tilted and underwent localized brittle-ductile strain in relation to shear zone deformation in the footwall of a major ductile thrust. Tilting permits the observation and study of a vertical profile of the intrusion. Localized deformation caused superposition of tectonic zonations on the magmatic ones, a reactivation of the basal contact of the pluton, and dismemberment from its root. This and other granitoid plutons of similar age emplaced at a similar depth constrained the creation of crustal mechanical heterogeneity and anisotropy. This controlled the site of pluton emplacement, the nucleation of a major ductile thrust, and localization of deformation and tectonic displacements along the pluton margins during later orogenic reactivation.

Long-term performance monitoring for a permeable reactive barrier at the U.S. Coast Guard Support Center, Elizabeth City, North Carolina.

PubMed

Puls, R W; Blowes, D W; Gillham, R W

1999-08-12

A continuous hanging iron wall was installed in June, 1996, at the U. S. Coast Guard (USCG) Support Center near Elizabeth City, NC, United States, to treat overlapping plumes of chromate and chlorinated solvent compounds. The wall was emplaced using a continuous trenching machine whereby native soil and aquifer sediment was removed and the iron simultaneously emplaced in one continuous excavation and fill operation. To date, there have been seven rounds (November 1996, March 1997, June 1997, September 1997, December 1997, March 1998, and June 1998) of performance monitoring of the wall. At this time, this is the only full-scale continuous 'hanging' wall installed as a permeable reactive barrier to remediate both chlorinated solvent compounds and chromate in groundwater. Performance monitoring entails the following: sampling of 10-5 cm PVC compliance wells and 15 multi-level samplers for the following constituents: TCE, cis-dichloroethylene (c-DCE), vinyl chloride, ethane, ethene, acetylene, methane, major anions, metals, Cr(VI), Fe(II), total sulfides, dissolved H(2), Eh, pH, dissolved oxygen, specific conductance, alkalinity, and turbidity. Electrical conductivity profiles have been conducted using a Geoprobe to verify emplacement of the continuous wall as designed and to locate upgradient and downgradient wall interfaces for coring purposes. Coring has been conducted in November, 1996, in June and September, 1997, and March, 1998, to evaluate the rate of corrosion on the iron surfaces, precipitate buildup (particularly at the upgradient interface), and permeability changes due to wall emplacement. In addition to several continuous vertical cores, angled cores through the 0.6-m thick wall have been collected to capture upgradient and downgradient wall interfaces along approximate horizontal flow paths for mineralogic analyses.

Vertical movements following intracontinental magmatism: An example from southern Israel

NASA Astrophysics Data System (ADS)

Gvirtzman, Zohar; Garfunkel, Zvi

1997-02-01

We present a quantitative thermal model for vertical movements following continental magmatism, focusing on how the associated elevation changes depend on the depth of intrusion. When an intrusion is emplaced within the lithosphere, its buoyancy causes a quick initial movement which is followed by long-term movements caused by thermal relaxation. Intrusions emplaced within the gabbro stability field produce initial uplifting which is about 12% of their thickness. Subsequent thermal relaxation reduces the uplift to a residual value of 9-10% of the intrusion thickness. In contrast, intrusions emplaced within the eclogite stability field produce a small subsidence from the very beginning which is slowly increased by thermal relaxation and may reach a residual value of some 4% of the intrusion thickness. In both cases the rates of the thermal subsidence depend on the depth of intrusion: it is relatively fast when the intrusions are shallow but considerably slower when the intrusions are deep. The model enables us to infer volumes and depths of intrusions from amplitudes and rates of vertical movements. As an example we apply the model to analyze the geodynamic evolution of the central Negev, southern Israel, during the Early Cretaceous. Two distinct magmatic pulses that were recognized there represent the two basic situations envisaged by the model, i.e., shallow magma emplacement in the gabbro field associated with uplifting, and deep intrusion in the eclogite field associated with subsidence. In a wider context we think that this model may help in understanding intracratonic basins in nonextensional settings. In particular, deep and thick eclogite intrusions can explain subsidence of regions which were not extended nor uplifted and in regions where crustal magmatism and heating were not observed.

Characteristics and Significance of Magma Emplacement Horizons, Black Sturgeon Sill, Nipigon, Ontario

NASA Astrophysics Data System (ADS)

Zieg, M. J.; Hone, S. V.

2017-12-01

Spatial scales strongly control the timescales of processes in igneous intrusions, particularly through the thermal evolution of the magma, which in turn governs the evolution of crystallinity, viscosity, and other important physical and chemical properties of the system. In this study, we have collected a highly detailed data set comprising geochemical (bulk rock composition), textural (size and alignment of plagioclase crystals), and mineralogical (modal abundance) profiles through the central portion of the 250 m thick Black Sturgeon diabase sill. In this data, we have identified characteristic signals in texture (soft and somewhat diffuse chills), composition (reversals in differentiation trends), and mineralogy (olivine accumulations), all coinciding and recurring at roughly 10 meter intervals. Based on these signatures, we are able to map out multiple zones representing discrete pulses of magma that were emplaced sequentially as the intrusion was inflated. Simple thermal calculations suggest that each 10 meters of new crystallization would require repose times on the order of 10-100 years. To build up 250 meters of magma at this rate would only require approximately 250-2500 years, significantly less than the thermal lifetime of the entire sill. The soft chills we observe in the Black Sturgeon sill are therefore consistent with a system that remained warm throughout the emplacement process. Successive pulses were injected into partially crystalline mush, rather than pure liquid (which would result in hybridization) or solid (which would produce sharp hard chills). Episodic emplacement is by now widely recognized as a fundamental process in the formation of large felsic magma chambers; our results suggest that this also may be an important consideration in understanding the evolution of smaller mafic intrusions.

Magma emplacement mechanisms and syn-magmatic deformation - a new approach to the Knaben area in Vest Agder, Norway

NASA Astrophysics Data System (ADS)

Stormoen, Martin Austin; Slagstad, Trond; Henderson, Iain

2014-05-01

The Knaben area, known for its molybdenite mining, defines a N-S striking (~30 degrees dip towards the east) belt, consisting of porphyry granite with a varying density of amphibolite and varieties of deformed granite, lying within the Sirdal Magmatic Belt, is important for understanding the emplacement- and deformation mechanisms of the batholith. Detailed geological mapping combined with geochronology, geochemistry, and structural geology will be the focus areas. Last autumn's fieldwork indicated that several of the formerly mapped enclaves of amphibolite and deformed granite are more coherent then previously indicated, and some have been followed for a few kilometres. Several varieties of granite make up the area, mainly a dominating red porphyry granite, and a grey molybdenite-bearing finer grained granite. Structural investigations revealed consistent "top to the west" compressional kinematics on mappable shear zone networks often displaying west-directed duplex geometries. The Knaben area could possibly comprise a boundary between two individual plutons in the Sirdal Magmatic Belt, or a zone with remaining host rock. Geochronology of the eastern and western plutons will be done. Currently, largely different paleomagnetic vectors of the eastern and western porphyry granites indicate that they are separate plutons. Exploring how the emplacement- and deformation mechanisms have acted and are related, will be one of the main objectives. If the deformed granite is host rock, or syn- to post-magmatic deformed porphyry granite has been one of the major questions. A better understanding of the formation of the Knaben area, also regarding the emplacement of molybdenite, will prove useful for understanding the regional batholith, and possibly the possibility for molybdenite to occur elsewhere. The Sirdal Magmatic Belt, and also Knaben, seem to be of great value for studying magmatic processes.

Ground-based LiDAR Measurements of Actively Inflating Pahoehoe Flows, Kilauea Volcano, Hawaii: Implications for Emplacement of Basaltic Units on Mars

NASA Astrophysics Data System (ADS)

Byrnes, J. M.; Finnegan, D. C.; Nicoll, K.; Anderson, S. W.

2007-05-01

Remote sensing datasets enable planetary volcanologists to extract information regarding eruption processes. Long-lived effusive eruptions at sites such as Kilauea Volcano (HI) provide opportunities to collect rich observational data sets, including detailed measurements of topography and extrusion rates, that allow comparisons between lava flow surface morphologies and emplacement conditions for use in interpreting similar morphological features associated with planetary lava flows. On Mars, the emplacement of basaltic lava flows is a volumetrically and spatially important process, creating both large-scale and small-scale surface morphologies. On Earth, low effusion rate eruptions on relatively horizontal slopes tend to create inflated lava flows that display hummocky topography. To better understand the processes involved in creating observed surface characteristics, we repeatedly measured the surface topography of an actively flowing and inflating basaltic unit within the Pu'u O'o flow field over a 5-day period. We used a ground-based laser-scanner (LiDAR) system that provided vertical and horizontal accuracies of 4 mm. Comparing DEMs from repeated laser scans yielded the magnitudes and styles of constructional processes, allowing us to quantify the relationship between pre- and post-emplacement surface topography. Our study site (roughly 200 m x 200 m) experienced about 5 m of vertical inflation over a 3 day period and created a new hummocky surface containing several tumuli. The temporal and spatial patterns of inflation were complex and showed no obvious relationship with underlying topography. High-precision morphometric measurements acquired using ground-based LiDAR affords us the opportunity to capture the essential boundary conditions necessary for evaluating and comparing high-resolution planetary data sets, such as those acquired by the MOC, HRSC, and HiRISE instruments.

Calculation of the Naval Long and Short Waste Package Three-Dimensional Thermal Interface Temperatures

DOE Office of Scientific and Technical Information (OSTI.GOV)

H. Marr

2006-10-25

The purpose of this calculation is to evaluate the thermal performance of the Naval Long and Naval Short spent nuclear fuel (SNF) waste packages (WP) in the repository emplacement drift. The scope of this calculation is limited to the determination of the temperature profiles upon the surfaces of the Naval Long and Short SNF waste package for up to 10,000 years of emplacement. The temperatures on the top of the outside surface of the naval canister are the thermal interfaces for the Naval Nuclear Propulsion Program (NNPP). The results of this calculation are intended to support Licensing Application design activities.

Martian rampart crater ejecta - Experiments and analysis of melt-water interaction

NASA Astrophysics Data System (ADS)

Wohletz, K. H.; Sheridan, M. F.

1983-10-01

Viking images of Martian craters with rampart-bordered ejecta deposits reveal distinct impact ejecta morphology when compared to that associated with similar-sized craters on the Moon and Mercury. It is suggested that target water explosively vaporized during impact alters initial ballistic trajectories of ejecta and produces surging flow emplacement. The dispersal of particulates during a series of controlled steam explosions generated by interaction of a thermite melt with water has been experimentally modeled. Study of terrestrial, lobate, volcanic ejecta produced by steam-blast explosions reveals that particle size and vapor to clast volume ratio are primary parameters characterizing the emplacement mechanism and deposit morphology.

Lower Crstal Reflectity bands and Magma Emplacement in Norweigian sea, NE Atlantic

NASA Astrophysics Data System (ADS)

Rai, A.; Breivik, A. J.; Mjelde, R.

2013-12-01

In this study we present the OBS data collected along seismic profiles in the norweigian sea. The traveltime modelling of the OBS data provides first-hand information about seismic structure of the subsurface. However, waveform modelling is used to further constrain the fine scale structure, velocity constrast and velocity gradients. By forward modelling and inversion of the seismic waveforms, we show that the multiple bands of reflectivity could be due to multiple episodes of magma emplacements that might have frozen in the form of sills. These mafic intrusions probably intruded into the ductile lower crust during the main rifting phase of Europe and Greenland.

Mantle helium in ground waters of eastern North America: Time and space constraints on sources

USGS Publications Warehouse

Torgersen, T.; Drenkard, S.; Stute, M.; Schlosser, P.; Shapiro, A.

1995-01-01

Mantle helium in continental environments is generally considered to be the result of active volcanism and/or active extension. The latest episodes of volcanism in northeastern North America are the track of the New England hotspot (95–190 Ma) and the closure of the Iapetus sea (before 300 Ma). Thus, the identification of mantle helium in young ground waters of central New England is counter to the conventional wisdom. On the basis of evaluation of helium evolution in emplaced magmas, we postulate an “aged” mantle source for the excess helium component in ground waters of central New England that is either (1) a local, near-surface–emplaced, gas-rich magma that has retained significant volatiles (e.g., in fluid inclusions) or (2) a deeply emplaced gas-rich magma with high initial 2He/4He (10−5) and helium transport (with dispersion) through the crust over time. This gas-rich initial condition may support the concept of a volatile-enriched mantle wedge and thus explain the increased buoyancy flux of the New England hotspot as it traversed eastern North America, as has been suggested by others.

U-Pb ages and metamorphic evolution of the La Pampa Gneisses: Implications for the evolution of the Chilenia Terrane and Permo-Triassic tectonics of north Central Chile

NASA Astrophysics Data System (ADS)

Álvarez, Javier; Mpodozis, Constantino; Blanco-Quintero, Idael; García-Casco, Antonio; Arriagada, César; Morata, Diego

2013-11-01

The La Pampa Gneisses are an enclave of orthogneisses emplaced within late Paleozoic to Triassic granitoids of the Chollay Batholith, in the Cordillera Frontal, to the east of Vallenar. Previous geochronological data (a Rb/Sr “errorchron” of 415 ± 4 Ma) allowed to some authors to suggest that these rocks were part of the Chilenia Terrane accreted to Gondwana during the Middle Devonian (ca. 390 Ma). New petrographic, chemical and geothermobarometric studies, together with U-Pb geochronological data show that the protolith of the La Pampa Gneisses derives from peraluminous tonalites emplaced during the Pennsylvanian at 306.5 ± 1.8 Ma, ruling out the hypothesis considering these rocks as remnant of the pre-collisional Chilenia basement. The tonalites were metamorphosed between 5.06 and 5.58 kbar and 709-779 °C during the middle Permian (267.6 ± 2.1 Ma), possibly in conjunction with the San Rafael tectonic event and the emplacement of the oldest granitoids of the Chollay Batholith. A new intrusive episode occurred at ca. 240 Ma, followed by exhumation and cooling during a regional Triassic extensional episode.

Magnetic susceptibility and AMS of the Bushveld alkaline granites, South Africa

NASA Astrophysics Data System (ADS)

Ferré, Eric C.; Wilson, Jeff; Gleizes, Gérard

1999-06-01

The Bushveld Complex in South Africa includes one of the world's largest anorogenic alkaline granite intrusions (66,000 km 2). The granite forms a composite laccolith, of 350 × 250 km in area and about 2 km in thickness, which was emplaced at about 5 km depth into sediments overlying the Kaapvaal craton, at 2054 Ma. The Bushveld granite and its roof-rocks have long been mined for Sn, W and F. The Bushveld granites have high magnetic susceptibilities ( Km from 1000 to 4000 μSI), and a quantitative model is presented, suggesting that susceptibility fabrics are primarily carried by ferromagnetic minerals. The measured AMS foliations coincide with observed subhorizontal mineral lineations and compositional layering. Magnetic lineation trends vary considerably within the horizontal plane. The existence of a weak planar fabric and, an almost absent linear component may reflect (a) laccolithic emplacement by roof uplift, causing flattening magmatic fabrics, or (b) emplacement of largely crystal-free magma crystallizing in-situ and developing horizontal compositional layering from thermal chemical diffusion fronts and gravity-driven mechanisms. Weak magnétic fabrics, like those identified in the Bushveld granites require specific sampling schemes and procedures, in addition to rigorous constraint of magnetic mineralogy and crystallization sequence.

Landslides in Valles Marineris, Mars

NASA Technical Reports Server (NTRS)

Lucchitta, B. K.

1979-01-01

The morphology of the landslides in the Martian equatorial troughs, the geologic structure of the troughs, the time of emplacement, the similarity to terrestrial landslides, and the origin and mechanism of transport are analyzed. About 35 large landslides well-resolved on Viking images were examined, and it is found that the major landslides cover 31,000 sq km of the trough floors, and individual slides range in area from 40 to 7000 sq km. The morphologic variations of the landslides can be attributed mainly to their degree of confinement on trough floors. Many prominent landslides appear to be of similar age and were emplaced after a major faulting that dropped the trough floors. Most sliding occurred after the created scarps were dissected into spurs, gullies, and tributary canyons. Emplacement of the landslides approximately coincided with a late episode of major eruptive activity of the Tharsis volcanoes, and it is suggested that the slides may have originated as gigantic mudflows with slump blocks at their heads. The large size of many landslides is due to the fault scarps as high as 7 km on which they formed in the absence of vigorous fluvial erosion. The landslides suggest that Mars is earthlike in some respects, which may be important for further evaluations.

Propagation of dikes at Vesuvio (Italy) and the effect of Mt. Somma

NASA Astrophysics Data System (ADS)

Acocella, V.; Porreca, M.; Neri, M.; Massimi, E.; Mattei, M.

2006-04-01

Dikes provide crucial information on how magma propagates within volcanoes. Somma-Vesuvio (Italy) consists of the active Vesuvio cone, partly bordered by the older Mt. Somma edifice. Historical chronicles on the fissure eruptions in 1694-1944 are matched with an analytical solution to define the propagation path of the related dikes and to study any control of the Mt. Somma relief. The fissures always consisted of the downslope migration of vents from an open summit conduit, indicating lateral propagation as the predominant mechanism for shallow dike emplacement. No fissure emplaced beyond Mt. Somma, suggesting that its buttressing hinders the propagation of the radial dikes. An analytical solution is defined to describe the mechanism of formation of the laterally propagating dikes and to evaluate the effect of topography. The application to Somma-Vesuvio suggests that, under ordinary excess magmatic pressures, the dikes should not propagate laterally at depths >240-480 m below the surface, as the increased lithostatic pressure requires magmatic pressures higher than average. This implies that, when the conduit is open, the lateral emplacement of dikes is expectable on the S, W and E slopes. The lack of fissures N of Mt. Somma is explained by its buttressing, which hinders dike propagation.

Deep Borehole Field Test Requirements and Controlled Assumptions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hardin, Ernest

2015-07-01

This document presents design requirements and controlled assumptions intended for use in the engineering development and testing of: 1) prototype packages for radioactive waste disposal in deep boreholes; 2) a waste package surface handling system; and 3) a subsurface system for emplacing and retrieving packages in deep boreholes. Engineering development and testing is being performed as part of the Deep Borehole Field Test (DBFT; SNL 2014a). This document presents parallel sets of requirements for a waste disposal system and for the DBFT, showing the close relationship. In addition to design, it will also inform planning for drilling, construction, and scientificmore » characterization activities for the DBFT. The information presented here follows typical preparations for engineering design. It includes functional and operating requirements for handling and emplacement/retrieval equipment, waste package design and emplacement requirements, borehole construction requirements, sealing requirements, and performance criteria. Assumptions are included where they could impact engineering design. Design solutions are avoided in the requirements discussion. Deep Borehole Field Test Requirements and Controlled Assumptions July 21, 2015 iv ACKNOWLEDGEMENTS This set of requirements and assumptions has benefited greatly from reviews by Gordon Appel, Geoff Freeze, Kris Kuhlman, Bob MacKinnon, Steve Pye, David Sassani, Dave Sevougian, and Jiann Su.« less

Emplacement of the Santa Rita Flat pluton as a pluton-scale saddle reef

NASA Astrophysics Data System (ADS)

Vines, John A.; Law, Richard D.

2000-12-01

Regional mapping indicates that the Middle Jurassic Santa Rita Flat pluton, exposed in the Inyo Range of eastern California, is situated within the core of a south-plunging synform defined by bedding in the surrounding metasedimentary wall rocks, which dip beneath the pluton. However, bedding in rocks preserved above the pluton defines a south-plunging antiform. Anisotropy of magnetic susceptibility analysis revealed that magnetic foliation within the pluton also defines a south-plunging antiform, and the accompanying magnetic lineation plunges subparallel to the axis of this antiform. Our data indicate that the pluton was initially intruded as a sill in the hinge zone of the enveloping synform. Subsequent vertical inflation of the sill resulted in upward doming of the overlying roof and formation of the antiform now observed at the current erosion level in the pluton and preserved roof rocks. Emplacement of the pluton at 164 ± 1.5 Ma (U-Pb zircon age) overlaps in time with regional thrust faulting and folding ca. 185 148 Ma recognized in the southern Inyo Range. We speculate that space for initial emplacement of the pluton was produced during folding by layer-parallel slip and hinge-zone dilation, producing a saddle reef-like structure.

Morphology, stratigraphy, and surface roughness properties of Venusian lava flow fields

NASA Astrophysics Data System (ADS)

Byrnes, Jeffrey M.; Crown, David A.

2002-10-01

Morphologic characteristics, flow stratigraphy, and radar backscatter properties of five lava flow fields on Venus (Turgmam Fluctus, Zipaltonal Fluctus, Tuli Mons/Uilata Fluctus, Var Mons, and Mylitta Fluctus) were examined to understand flow field emplacement mechanisms and relationships to other surface processes. These analyses indicate that the flow fields studied developed through emplacement of numerous, thin flow units, presumably over extended periods of time. Although the Venusian fields display flow morphologies similar to those observed within terrestrial flow fields, the Venusian flow units are significantly larger and have a larger range of radar backscatter coefficients. Both simple and compound flow emplacement appear to have occurred within the flow fields. A potential correlation between flow rheology and radar brightness is suggested by differences in planform morphology, apparent flow thickness, and apparent sensitivity to topography between bright and dark flows. Distributary flow morphologies may result from tube-fed flows, and postemplacement modification by processes such as flow inflation and crustal foundering is consistent with discrete zones of increased radar brightness within individual flow lobes. Mapping of these flow fields does not indicate any simple evolutionary trend in eruptive/resurfacing style within the flow fields, or any consistent temporal sequence relative to other tectonic and volcanic features.

The ''Taourirt'' magmatic province, a marker of the closing stage of the Pan-African orogeny in the Tuareg Shield: review of available data and Sr-Nd isotope evidence

NASA Astrophysics Data System (ADS)

Azzouni-Sekkal, Abla; Liégeois, Jean-Paul; Bechiri-Benmerzoug, Faten; Belaidi-Zinet, Safia; Bonin, Bernard

2003-10-01

The Tuareg Shield, located between the Archaean to Palaeoproterozoic Saharan metacraton and the West African craton, is composed of 23 recognized terranes that welded together during the Neoproterozoic Pan-African orogeny (750-520 Ma). Final convergence occurred mainly during the 620-580 Ma period with the emplacement of high-K calc-alkaline batholiths, but continued until 520 Ma with the emplacement of alkali-calcic and alkaline high-level complexes. The last plutons emplaced in central Hoggar at 539-523 Ma are known as the "Taourirt" province. This expression is redefined and three geographical groups are identified: the Silet-, Laouni- and Tamanrasset-Taourirts. The Silet-Taourirts are cross-cutting Pan-African island arc assemblages while the two others intrude the Archaean-Palaeoproterozoic LATEA metacraton. The Taourirts are high-level subcircular often nested alkali-calcic, sometimes alkaline, complexes. They are aligned along mega-shear zones often delimiting terranes. Mainly granitic, they comprise highly differentiated varieties such as alaskite (Silet-Taourirts) and topaz-albite leucogranite (Tamanrasset-Taourirts). Different subgroups were defined on the basis of REE patterns and major and other trace elements. The Taourirt province displays a wide transition from dominant alkali-calcic to minor alkaline granite varieties. Sr isotopes indicate that these complexes were affected by fluid circulation during the Ordovician along shear zones probably contemporaneous to the beginning of the Tassilis sandstone deposition. Nd isotope systematic indicates a major interaction with the upper crust during the emplacement of highly differentiated melts, particularly in samples showing seagull wing-shaped REE patterns. On the other hand, all Taourirt plutons are strongly contaminated by the lower crust: ɛNd vary from -2 to -8 and TDM from 1200 to 1700 Ma. This implies the presence of an old crust at depth, also below the Silet-Taourirts, which are emplaced within Pan-African island arc assemblages. A model is proposed for the genesis of the Taourirt province where reworking of the mega-shear zones, which dissected the LATEA metacraton, provoked a linear delamination of the lithospheric mantle, asthenosphere uprise and partial melting of the lower crust (or strong interaction with), giving rise to a mixed source.

High-temperature metamorphism and its relation with magmatism (Svecofennian Belt, the Ladoga region, Russia)

NASA Astrophysics Data System (ADS)

Baltybaev, Shauket

2010-05-01

The Ladoga region, situated in the south-eastern part of the Fennoscandian shield, is subdivided into the Archean (ARD) and the Proterozoic (PRD) domains. The boundary between them is a wide shear-zone. The ARD consists mostly of AR-PR middle-low temperature gneisses and the PRD consists of turbidites, pelites, volcanics metamorphosed under HT-conditions (granulite facies). Metamorphism within the PRD is culminated at T= 800-900C and P=5-6 kbar. The peak of metamorphism of granulite facies is dated at 1881 Ma by Pb-Pb stepwise leaching method of rock-forming minerals of the granulites. Pb-Pb results are within error limits coeval with the U-Pb ages of metamorphic monazites. The same (1881Ma) age has gabbro-enderbites. Next stage of metamorphism lasts from 1881 to 1860 Ma under conditions of amphibolite facies. It was restricted with U-Pb, Pb-Pb, Sm-Nd data based on the closure temperature of zircon, monazite, garnet, sillimanite from gneisses, leucosomes of migmatites and synmetamorphic diorites and tonalites. The lowermost point of the trend shows P-T: ~3-4 kbar, 600C. By the time 1860 Ma K-rich granites were emplaced and the uppermost limit for granulite metamorphism comes from the ages of the aplitic/pegmatitic veins (1860-1850 Ma), which cut the K-rich granites. Thermal and tectonic settings can be described based on spatial and temporal changes during magma emplacement. The granulites of the PRD were produced by the emplacement of the extensive basic intrusion (gabbro-enderbites) into the lower-middle crust. A prolonged thermal flux over all area was supported by new generated dioritic and tonalitic melts, which were intruded into the middle crust. The final stage of tectono-metamorphic evolution was marked by emplacement of the K-rich granites. Numerical simulation of the process of magma emplacement (sequences: gabbro-enderbites, diorites and tonalites) and related heat production shows good correlation between intrusive activity and metamorphism of the surrounding rocks. Baltybaev Sh. K., Levchenkov O. A., Levsky L. K., Eklund O., Kilpeläinen T. 2006. Two metamorphic stages in the Svecofennian Domain: evidence from the isotopic geochronological study of the Ladoga and Sulkava metamorphic complexes. Petrology, 14(3), 247-261.

Structural control on the emplacement of contemporaneous Sn-Ta-Nb mineralized LCT pegmatites and Sn bearing quartz veins: Insights from the Musha and Ntunga deposits of the Karagwe-Ankole Belt, Rwanda

NASA Astrophysics Data System (ADS)

Hulsbosch, Niels; Van Daele, Johanna; Reinders, Nathan; Dewaele, Stijn; Jacques, Dominique; Muchez, Philippe

2017-10-01

The Nb-Ta-Sn pegmatites and Sn quartz veins of the Rwamagana-Musha-Ntunga area in eastern Rwanda are part of the Mesoproterozoic Karagwe-Ankole Belt. These commodities are on a regional scale spatiotemporally associated to the early Neoproterozoic fertile G4-granite generation. Although a transition from the lithium-cesium-tantalum pegmatites to cassiterite-microcline-quartz veins has been observed in the Rwamagana-Musha-Ntunga area, the structural control and the paragenetic relationship between the mineralized pegmatites and the Sn bearing quartz veins is largely unknown. Consequently, this study investigates the occurrence of pegmatites and quartz veins and the structural and lithological controls on their emplacement. The metasediments in the area are affected by a regional compressional regime with a shortening direction oriented N70E, which resulted in a N20W-oriented fold sequence. The Lake Muhazi granite is present in center of the Karehe anticline. The structural orientations of pegmatites and quartz veins show that two important factors control their emplacement. The first control is the reactivation of pre-existing discontinuities such as the bedding, bedding-parallel joints or strike-slip fault planes. In view of the regional structural grain in the Rwamagana-Musha-Ntunga area, this corresponds with abundant N20W-oriented pegmatites and quartz veins. The reactivation is strongly related to the lithology of the host rocks. The Musha Formation, which mainly consists of decimeter- to meter-scale lithological alternations of metapelite, metasiltstone and metasandstone, represents the most suitable environment for bedding reactivation. This is reflected in the predominance of bedding-parallel pegmatites and quartz veins hosted by the Musha Formation. Strike-parallel joints were mainly observed in the competent lithologies. The second controlling factor is related to the regional post-compressional stress regime. New joints initiated upon emplacement of the pegmatites and quartz veins. The orientations of these joints are influenced by the regional stress regime and resulted in steep EW-oriented pegmatites and quartz veins in the Rwamagana-Musha-Ntunga area. The pegmatites and quartz veins are interpreted as being initiated upon emplacement under influence of the prevailing regional stress regime. This post-compressional stress regime is characterized by a subvertical maximum compressive stress.

Analogue experiments as benchmarks for models of lava flow emplacement

NASA Astrophysics Data System (ADS)

Garel, F.; Kaminski, E. C.; Tait, S.; Limare, A.

2013-12-01

During an effusive volcanic eruption, the crisis management is mainly based on the prediction of lava flow advance and its velocity. The spreading of a lava flow, seen as a gravity current, depends on its "effective rheology" and on the effusion rate. Fast-computing models have arisen in the past decade in order to predict in near real time lava flow path and rate of advance. This type of model, crucial to mitigate volcanic hazards and organize potential evacuation, has been mainly compared a posteriori to real cases of emplaced lava flows. The input parameters of such simulations applied to natural eruptions, especially effusion rate and topography, are often not known precisely, and are difficult to evaluate after the eruption. It is therefore not straightforward to identify the causes of discrepancies between model outputs and observed lava emplacement, whereas the comparison of models with controlled laboratory experiments appears easier. The challenge for numerical simulations of lava flow emplacement is to model the simultaneous advance and thermal structure of viscous lava flows. To provide original constraints later to be used in benchmark numerical simulations, we have performed lab-scale experiments investigating the cooling of isoviscous gravity currents. The simplest experimental set-up is as follows: silicone oil, whose viscosity, around 5 Pa.s, varies less than a factor of 2 in the temperature range studied, is injected from a point source onto a horizontal plate and spreads axisymmetrically. The oil is injected hot, and progressively cools down to ambient temperature away from the source. Once the flow is developed, it presents a stationary radial thermal structure whose characteristics depend on the input flow rate. In addition to the experimental observations, we have developed in Garel et al., JGR, 2012 a theoretical model confirming the relationship between supply rate, flow advance and stationary surface thermal structure. We also provide experimental observations of the effect of wind the surface thermal structure of a viscous flow, that could be used to benchmark a thermal heat loss model. We will also briefly present more complex analogue experiments using wax material. These experiments present discontinuous advance behavior, and a dual surface thermal structure with low (solidified) vs. high (hot liquid exposed at the surface) surface temperatures regions. Emplacement models should tend to reproduce these two features, also observed on lava flows, to better predict the hazard of lava inundation.

The Jurassic-early Cretaceous Ilo batholith of southern coastal Peru: geology, geochronology and geochemistry

NASA Astrophysics Data System (ADS)

Boekhout, Flora; Sempere, Thierry; Spikings, Richard; Schaltegger, Urs

2010-05-01

The Ilo batholith (17°00 - 18°30 S) crops out in an area of about 20 by 100 km, along the coast of southern Peru. This batholith is emplaced into the ‘Chocolate‘ Formation of late Permian to middle Jurassic age, which consists of more than 1000 m of basaltic and andesitic lavas, with interbedded volcanic agglomerates and breccias. The Ilo Batholith is considered to be a rarely exposed fragment of the Jurassic arc in Peru. Our aim is to reconstruct the magmatic evolution of this batholith, and place it within the context of long-lasting magma genesis along the active Andean margin since the Paleozoic. Sampling for dating and geochemical analyses was carried out along several cross sections through the batholith that were exposed by post-intrusion eastward tilting of 20-30°. Sparse previous work postulates early to middle Jurassic and partially early Cretaceous emplacement, on the basis of conventional K/Ar and 40Ar/39Ar dating methods in the Ilo area. Twenty new U-Pb zircon ages (LA-ICP-MS and CA-ID-TIMS) accompanied by geochemical data suggests the Ilo batholith formed via the amalgamation of middle Jurassic and early Cretaceous, subduction-related plutons. Preliminary Hf isotope studies reveal a primitive mantle source for middle Jurassic intrusions. Additional Sr, Nd and Hf isotope analyses are planned to further resolve the source regions of different pulses of plutonic activity. We strongly suggest that batholith emplacement was at least partly coeval with the emplacement of the late Permian to middle Jurassic Chocolate Formation, which was deposited in an extensional tectonic regime. Our age results and geochemical signature fit into the scheme of episodic emplacement of huge amounts of subduction related magmatism that is observed throughout the whole Andean event, particularly during the middle Jurassic onset of the first Andean cycle (southern Peru, northern Chile and southern Argentina). Although the exact geodynamic setting remains to be precisely defined, these events can be linked to extensional episodes during the breakup of Pangea, which commenced at 230-220 Ma along the western South American margin, with a period of rifting, and culminated in the Jurassic with arc and back-arc extension.

Geology and geochemistry of newly discovered Tertiary carbonatite occurrences near Villa Ahumada area, Basin and Range province, Chihuahua, northern Mexico

NASA Astrophysics Data System (ADS)

Nandigam, Ravi Chenchu

This study targets some newly discovered carbonatite occurrences located in the eastern Mexican Basin and Range province, a few kilometers to the east of Villa Ahumada, Chihuahua. The region containing these occurrences experienced compression related to subduction of the Farallon plate until about 32 Ma that was followed by Basin and Range extension. Geological mapping (1:5,000 scale), petrography, study of drill hole cuttings and satellite images, and major and trace element chemical analyses were utilized to understand the intrusive style of the carbonatites, their mineralogy and petrogenesis. The carbonatites, named Yuca, Mariana and El Indio, collectively intrude limestones, granitic intrusives and subduction-related tuffs and lavas mainly as a stock, breccias and dikes. The Yuca carbonatite was emplaced as a 900-m diameter stock, 500 x 350 m breccia body, numerous dikes and networks of fracture fillings. Crosscutting field relationships at Yuca suggest at least two stages of carbonatite emplacement. At Mariana, carbonatite was emplaced as a 750 x 350 m breccia. Four out of nine reverse circulation drill holes penetrated and bottomed in the breccia at an average depth of about 300 m At El Indio, carbonatite was emplaced as a 20 m diameter breccia pipe and a 1m thick sill. Major minerals present are calcite, Fe-rich calcite and hematite. Sporadic presence of fluorite is common. At Mariana, two generations of grossular-rich garnets associated with limestones and granite porphyry respectively are recognized. It is inferred that garnets in granite porphyry represent metasomatic alteration due to the emplacement of carbonatite breccia. Parental magmas of Yuca carbonatites have undergone differentiation under low fO2 conditions during which they were progressively enriched in iron. The carbonatite compositional types recognized based on major element data, in the sequence of least to most highly differentiated, are (1) magnesio-, (2) calcio- and (3) ferrocarbonatites. The concentrations of thorium, uranium, niobium, yttrium and rare earth elements increase with differentiation. Carbonatites are associated with up to 20000 times enrichment of lanthanum and cerium with respect to chondrite. Finally, the Mariana carbonatite breccia is associated with about 7,928,550 short tons of rock with a grade of 0.14% SigmaREE, and primitive mantle normalized trace element plots of carbonatites indicate a mantle origin of their parental melts.

Mass wasting features in Juventae Chasma, Mars

NASA Astrophysics Data System (ADS)

Sarkar, Ranjan; Singh, Pragya; Porwal, Alok; Ganesh, Indujaa

2016-07-01

Introduction : We report mass-wasting features preserved as debris aprons from Juventae Chasma. Diverse lines of evidence and associated geomorphological features indicate that fluidized ice or water within the wall rocks of the chasma could be responsible for mobilizing the debris. Description : The distinctive features of the landslides in Juvenate Chasma are: (1) lack of a well-defined crown or a clear-cut section at their point of origin and instead the presence of amphitheatre-headed tributary canyons; (2) absence of slump blocks; (3) overlapping of debris aprons; (4) a variety of surface textures from fresh and grooved to degraded and chaotic; (5) rounded lobes of debris aprons; (6) large variation of sizes from small lumps (~0.52 m2) to large tongue shaped ones (~ 80 m2); (7) smaller average size of landslides as compared to other chasmas; and (8) occasional preservation of fresh surficial features indicating recent emplacement. Discussion : Amphitheatre-headed tributary canyons, which are formed due to ground water sapping, indicate that the same was responsible for wall-section collapse, although a structural control cannot be completely ruled out. The emplacement of the mass wasting features preferentially at the mouths of amphitheatre-headed tributary canyons along with the rounded flow fronts of the debris suggest fluids may have played a vital role in their emplacement. The mass-wasting features in Juventae Chasma are unique compared to other landslides in Valles Marineris despite commonalities such as the radial furrows, fan-shaped outlines, overlapping aprons and overtopped obstacles. The unique set of features and close association with amphitheatre-headed tributary canyons imply that the trigger of the landslides was not structural or tectonic but possibly weakness imparted by the presence of water or ice in the pore-spaces of the wall. Craters with fluidized ejecta blankets and scalloped depressions in the surrounding plateau also support this possibility. Depending on the amounts of fluids involved at the time of emplacement, these mass movements may also qualify as debris flows. The role of fluids in the Valles Marineris landslides is still debated; however, in the Juventae Chasma landslides we see unique features which set these apart from other landslides in Valles Marineris. Further study is required to fully investigate the mechanism of emplacement of these debris.

SILLi 1.0: a 1-D numerical tool quantifying the thermal effects of sill intrusions

NASA Astrophysics Data System (ADS)

Iyer, Karthik; Svensen, Henrik; Schmid, Daniel W.

2018-01-01

Igneous intrusions in sedimentary basins may have a profound effect on the thermal structure and physical properties of the hosting sedimentary rocks. These include mechanical effects such as deformation and uplift of sedimentary layers, generation of overpressure, mineral reactions and porosity evolution, and fracturing and vent formation following devolatilization reactions and the generation of CO2 and CH4. The gas generation and subsequent migration and venting may have contributed to several of the past climatic changes such as the end-Permian event and the Paleocene-Eocene Thermal Maximum. Additionally, the generation and expulsion of hydrocarbons and cracking of pre-existing oil reservoirs around a hot magmatic intrusion are of significant interest to the energy industry. In this paper, we present a user-friendly 1-D finite element method (FEM)-based tool, SILLi, which calculates the thermal effects of sill intrusions on the enclosing sedimentary stratigraphy. The model is accompanied by three case studies of sills emplaced in two different sedimentary basins, the Karoo Basin in South Africa and the Vøring Basin off the shore of Norway. An additional example includes emplacement of a dyke in a cooling pluton which forgoes sedimentation within a basin. Input data for the model are the present-day well log or sedimentary column with an Excel input file and include rock parameters such as thermal conductivity, total organic carbon (TOC) content, porosity and latent heats. The model accounts for sedimentation and burial based on a rate calculated by the sedimentary layer thickness and age. Erosion of the sedimentary column is also included to account for realistic basin evolution. Multiple sills can be emplaced within the system with varying ages. The emplacement of a sill occurs instantaneously. The model can be applied to volcanic sedimentary basins occurring globally. The model output includes the thermal evolution of the sedimentary column through time and the changes that take place following sill emplacement such as TOC changes, thermal maturity and the amount of organic and carbonate-derived CO2. The TOC and vitrinite results can be readily benchmarked within the tool to present-day values measured within the sedimentary column. This allows the user to determine the conditions required to obtain results that match observables and leads to a better understanding of metamorphic processes in sedimentary basins.

Timing of mid-crustal ductile extension in the northern Snake Range metamorphic core complex, Nevada: Evidence from U/Pb zircon ages

NASA Astrophysics Data System (ADS)

Lee, J.; Blackburn, T.; Johnston, S. M.

2016-12-01

Metamorphic core complexes (Mccs) within the western U.S. record a history of Cenozoic ductile and brittle extensional deformation, metamorphism, and magmatism, and exhumation within the footwall of high-angle Basin and Range normal faults. Documenting these histories within Mccs have been topics of research for over 40 years, yet there remains disagreement about: 1) whether the detachment fault formed and moved at low angles or initiated at high angles and rotated to a low angle; 2) whether brittle and ductile extensional deformation were linked in space and time; and 3) the temporal relationship of both modes of extension to the development of the detachment fault. The northern Snake Range metamorphic core complex (NSR), Nevada has been central to this debate. To address these issues, we report new U/Pb dates from zircon in deformed and undeformed rhyolite dikes emplaced into ductilely thinned and horizontally stretched lower plate rocks that provide tight bounds on the timing of ductile extension at between 38.2 ± 0.3 Ma and 22.50 ± 0.36 Ma. The maximum age constraint is from the Northern dike swarm (NDS), which was emplaced in the northwest part of the range pre- to syn-tectonic with ductile extension. The minimum age constraint is from the Silver Creek dike swarm (SDS) that was emplaced in the southern part of the range post ductile extensional deformation. Our field observations, petrography, and U/Pb zircon ages on the dikes combined with published data on the geology and kinematics of extension, moderate and low temperature thermochronology on lower plate rocks, and age and faulting histories of Cenozoic sedimentary basins adjacent to the NSR are interpreted as recording an episode of localized upper crustal brittle extension during the Eocene that drove upward ductile extensional flow of hot middle crustal rocks from beneath the NSR detachment soon after, or simultaneous with, emplacement of the NDS. Exhumation of the lower plate continued in a rolling hinge/isostatic rebound style; the western part of the lower plate was exhumed first and the eastern part extended ductilely either continuously or episodically until the early Miocene when the post-tectonic SDS was emplaced. Major brittle slip along the eastern part of the NSR detachment and along high angle normal faults exhumed the lower plate during middle Miocene.

Internal Stratigraphy of the Palisades Sill Olivine Zone: An Olivine Slurry Emplaced in a Hot Sill

NASA Astrophysics Data System (ADS)

Haddad, J. R.; Naslund, H. R.

2017-12-01

The Palisades Sill is a 300 m thick Jurassic-Triassic sill-like sheet formed from a quartz-normative tholeiitic magma. Three geochemical reversals within the sill are the result of magma chamber recharges. This study focuses on the reversal at 10 m height, widely considered to be the result of the emplacement of an olivine-rich slurry (Husch 1990, Gorring 1995). Major and trace elements were determined for 35 samples from the olivine layer and adjacent sill spanning 10 m of stratigraphic height. Samples were collected from outcrops near the Ross Dock Picnic Area in Fort Lee, NJ. Mineral compositions were determined for 21 thin sections using an electron microprobe (EMP). Bulk rock chemistry shows that the base of the olivine layer is between 2.5 and 3.25 m above the base of sampling. This is indicated by a marked reversal in Mg#, which jumped from 64.2 to 68.6; Al2O3, Co, Ni, Sc, Cs, Dy, and La also show clear reversals at the same interval. This is further collaborated by the formation of a ledge in the outcrop. Bulk chemistry and olivine composition show no systematic changes within the olivine layer. EMP analyses of augites reveals that below the 2.5 m height, crystals are typically strongly zoned, average rim Mg#= 67, core Mg#= 82. Above the 2.5 m layer, core Mg# are similar, but average rim Mg#=75. The plagioclase/augite ratio remains relatively constant through the olivine layer, but the ratio of olivine to plagioclase+augite is quite variable, suggesting that the olivine-slurry was emplaced as an inhomogeneous mixture of olivine + magma. Similar tholeiitic sills on Victoria Island, Canada, contain olivine-rich basal layers in which the olivine to plagioclase+augite ratio systematically increases, and the olivine composition becomes systematically more Fe-rich, from the base to the top of the layer. Comparisons between these otherwise similar basal olivine-rich layers, suggests that sills like the Palisades, which represents the injection of an olivine-rich slurry, can be distinguished from sills like the Victoria Island sills, which represent the initial emplacement of an olivine-phyric magma, followed by post-emplacement crystal settling.

The origin of Phobos grooves from ejecta launched from impact craters on Mars: Tests of the hypothesis

NASA Astrophysics Data System (ADS)

Ramsley, Kenneth R.; Head, James W.

2013-01-01

The surface of the martian moon Phobos is characterized by parallel and intersecting grooves that bear resemblance to secondary crater chains observed on planetary surfaces. Murray (2011) has hypothesized that the main groove-forming process on Phobos is the intersection of Phobos with ejecta from primary impact events on Mars to produce chains of secondary craters. The hypothesis infers a pattern of parallel jets of ejecta, either fluidized or solidified, that break into equally-spaced fragments and disperse uniformly along-trajectory during the flight from Mars to Phobos. At the moment of impact with Phobos the dispersed fragments emplace secondary craters that are aligned along strike corresponding to the flight pattern of ejecta along trajectory. The aspects of the characteristics of grooves on Phobos cited by this hypothesis that might be explained by secondary ejecta include: their observed linearity, parallelism, planar alignment, pitted nature, change in character along strike, and a "zone of avoidance" where ejecta from Mars is predicted not to impact (Murray, 2011). To test the hypothesis we plot precise Keplerian orbits for ejecta from Mars (elliptical and hyperbolic with periapsis located below the surface of Mars). From these trajectories we: (1) set the fragment dispersion limits of ejecta patterns required to emplace the more typically well-organized parallel grooves observed in returned images from Phobos; (2) plot ranges of the ejecta flight durations from Mars to Phobos and map regions of exposure; (3) utilize the same exposure map to observe trajectory-defined ejecta exposure shadows; (4) observe hemispheric exposure in response to shorter and longer durations of ejecta flight; (5) assess the viability of ejecta emplacing the large family of grooves covering most of the northern hemisphere of Phobos; and (6) plot the arrival of parallel lines of ejecta emplacing chains of craters at oblique incident angles. We also assess the bulk volume of ejecta from martian impact events and the number of events that are necessary to supply sufficient bulk densities of secondary impactor fragments. On the basis of our analysis, we find that six major predictions of the Murray hypothesis are not consistent with a wide range of Mars ejecta emplacement models and observations as follows: (1) To emplace families of parallel grooves as observed in the most common features (grooves that manifest virtually no positional defects), and to reach the maximum geographic extent of Phobos, grid patterns of ejecta fragments must be produced with nearly identical diameters (often tens of thousands in number) and must launch with virtually zero rates of dispersion (<1 mm/s and <1.0 μrad in all degrees of freedom) into fixed patterns of arrays where fragment dispersion is referenced to a common datum point for the duration of flights from Mars to Phobos of up to 3 h. (2) Half of the areal region observed as a "zone of avoidance" (where grooves are absent on the trailing orbital apex of Phobos) is directly exposed to ejecta trajectories from the surface of Mars, which suggests that the "zone of avoidance" is unrelated to ejecta trajectories. (3) Several families of grooves display groove segments that are observed in a region of Phobos that is shadowed from martian ejecta trajectories for flight durations up to 3 h. Where the Murray hypothesis predicts the emplacement of groove families from a single ejecta plume, this strongly suggests that these families of grooves could not have been produced by martian impact ejecta. (4) To reach increasingly westerly locations of Phobos ejecta must travel in space for substantially longer flight times (up to 20X) which would produce substantially lower secondary crater densities on the anti-Mars side of Phobos and observably reduce their pit organization. This is not observed. (5) The largest family of grooves cannot be emplaced by any valid trajectory from Mars in its present day or ancient orbit. (6) If emplaced by grid patterns of ejecta, the irregular topography and small-body radius of Phobos would clearly disrupt groove family linearity and parallelism due to the preponderance of oblique incident angle impacts. However, when viewed from any position, the vast majority of groove families and individual grooves appear to completely avoid the effects of Phobos' morphology. Based on our analysis we conclude that the Murray hypothesis, that many Phobos grooves are formed by intersection of ejecta from craters on Mars, is not valid.

Therapeutic experiences of community gardens: putting flow in its place.

PubMed

Pitt, Hannah

2014-05-01

This paper develops the concept of therapeutic place experiences by considering the role of activity. Research of community gardening finds that particular tasks are therapeutic and exhibit the characteristics of flow, but those who lack influence over their community gardening are less likely to benefit from flow as their sense of control is reduced. The notion of emplaced flow is proposed to locate individual experiences amongst socio-spatial factors which limit self-determinacy and therefore affect wellbeing. Emplacing flow prompts critical reflection on who is excluded from therapeutic place experiences, and whether sites offering momentary escape have an enduring impact on wellbeing. Copyright © 2014 Elsevier Ltd. All rights reserved.

The fretted terrain of the Nilosyrtis Mensae region of Mars: Clues to the timing of dichotomy formation and the emplacement of the northern plains

NASA Technical Reports Server (NTRS)

Detroye, Jeff E.; Williams, Steven H.

1994-01-01

Geologic mapping of the fretted terrain of the Nilosyrtis Mensae region of Mars has revealed geomorphic evidence that the breakup of the plateau units to the south of Nilosyrtis occurred well before the plains units to the north were emplaced in the late Hesperian time. The plains units were deposited against the fretted terrain which has undergone some modification by mass wasting but not significant backwasting. The morphology observed at the contact between plains and the fretted terrain is consistent with that expected where the edge of a pile of sedimentary debris has undergone mass wasting and other erosion.

Kaltag fault, northern Yukon, Canada: Constraints on evolution of Arctic Alaska

NASA Astrophysics Data System (ADS)

Lane, Larry S.

1992-07-01

The Kaltag fault has been linked to several strike-slip models of evolution of the western Arctic Ocean. Hundreds of kilometres of Cretaceous-Tertiary displacement have been hypothesized in models that emplace Arctic Alaska into its present position by either left- or right-lateral strike slip. However, regional-scale displacement is precluded by new potential-field data. Postulated transform emplacement of Arctic Alaska cannot be accommodated by motion on the Kaltag fault or adjacent structures. The Kaltag fault of the northern Yukon is an eastward extrapolation of its namesake in west-central Alaska; however, a connection cannot be demonstrated. Cretaceous-Tertiary displacement on the Alaskan Kaltag fault is probably accommodated elsewhere.

Magma interaction in the root of an arc batholith

NASA Astrophysics Data System (ADS)

Chapman, T.; Robbins, V.; Clarke, G. L.; Daczko, N. R.; Piazolo, S.

2016-12-01

Fiordland, New Zealand, preserves extensive Cretaceous arc plutons, emplaced into parts of the Delamerian/Ross Orogen. Dioritic to gabbroic material emplaced at mid to lower crustal levels are exposed in the Malaspina Pluton (c. 1.2 GPa) and the Breaksea Orthogneiss (c. 1.8 GPa). Distinct magmatic pulses can be mapped in both of these plutons consistent with cycles of melt advection. Relationships are consistent with predictions from lower crustal processing zones (MASH and hot zones) considered important in the formation of Cordilleran margins. Metamorphic garnet growth is enhanced along magmatic contacts, such as where hornblende gabbronorite is cut by garnet-clinopyroxene-bearing diorite. Such features are consistent with cycles of incremental emplacement, younger magma having induced localised garnet granulite metamorphism in wall rock of older material. Temperature estimates and microstructures preserved in garnet granulite are consistent with sub-solidus, water-poor conditions in both the Malaspina and Breaksea Orthogneiss. The extent and conditions of the metamorphism implies conditions and duration was incapable of partially melting older wall rock material. The nature of interactions in intermediate to basic compositions are assessed in terms of magma genesis in the Cretaceous batholith. Most of the upper crustal felsic I-type magmatism along the margin being controlled by high-pressure garnet-clinopyroxene fractionation.

Structure of the Malpelo Ridge (Colombia) from seismic and gravity modelling

NASA Astrophysics Data System (ADS)

Marcaillou, Boris; Charvis, Philippe; Collot, Jean-Yves

2006-12-01

Wide-angle and multichannel seismic data collected on the Malpelo Ridge provide an image of the deep structure of the ridge and new insights on its emplacement and tectonic history. The crustal structure of the Malpelo Ridge shows a 14 km thick asymmetric crustal root with a smooth transition to the oceanic basin southeastward, whereas the transition is abrupt beneath its northwestern flank. Crustal thickening is mainly related to the thickening of the lower crust, which exhibits velocities from 6.5 to 7.4 km/s. The deep structure is consistent with emplacement at an active spreading axis under a hotspot like the present-day Galapagos Hotspot on the Cocos-Nazca Spreading Centre. Our results favour the hypothesis that the Malpelo Ridge was formerly a continuation of the Cocos Ridge, emplaced simultaneously with the Carnegie Ridge at the Cocos-Nazca Spreading Centre, from which it was separated and subsequently drifted southward relative to the Cocos Ridge due to differential motion along the dextral strike-slip Panama Fracture Zone. The steep faulted northern flank of the Malpelo Ridge and the counterpart steep and faulted southern flank of Regina Ridge are possibly related to a rifting phase that resulted in the Coiba Microplate’s separation from the Nazca Plate along the Sandra Rift.

Lateral extrusion of a thermally weakened pluton overburden (Campiglia Marittima, Tuscany)

NASA Astrophysics Data System (ADS)

Vezzoni, Simone; Rocchi, Sergio; Dini, Andrea

2017-10-01

The ascent and emplacement of magmas in the upper crust modify the local pre-existing thermal and rheological settings. Such changes have important effects in producing anomalous structures, mass extrusion, rock fracturing, and in some conditions, hydrothermal mineralizations. In the Campiglia Marittima area, detailed field mapping led to the reconstruction of a local deformation history that overlaps, chronologically and spatially, with regional extension. This local deformation was triggered at the Miocene-Pliocene boundary by the intrusion of a monzogranitic pluton beneath a carbonate sedimentary sequence. The emplacement of the pluton produced a perturbation in the rheological behaviour of the carbonate host rocks, producing transient ductile conditions in the very shallow crust. The carbonate rocks were thermally weakened and flowed laterally, accumulating downslope of the pluton roof, mainly toward the east. As the thermal anomaly was decaying, the brittle-ductile boundary moved progressively back towards the pluton, and large tension gash-shaped volumes of fractured marble were generated. These fractured volumes were exploited by rising hydrothermal fluids generating sigmoidal skarn bodies and ore shoots. This work presents the Campiglia Marittima case study as a prime example of structural interference between regional extensional structures and local, lateral mass extrusion in a transient ductile rheological regime triggered by pluton emplacement.

Bright crater outflows: Possible emplacement mechanisms

NASA Technical Reports Server (NTRS)

Chadwick, D. John; Schaber, Gerald G.; Strom, Robert G.; Duval, Darla M.

1992-01-01

Lobate features with a strong backscatter are associated with 43 percent of the impact craters cataloged in Magellan's cycle 1. Their apparent thinness and great lengths are consistent with a low-viscosity material. The longest outflow yet identified is about 600 km in length and flows from the 90-km-diameter crater Addams. There is strong evidence that the outflows are largely composed of impact melt, although the mechanisms of their emplacement are not clearly understood. High temperatures and pressures of target rocks on Venus allow for more melt to be produced than on other terrestrial planets because lower shock pressures are required for melting. The percentage of impact craters with outflows increases with increasing crater diameter. The mean diameter of craters without outflows is 14.4 km, compared with 27.8 km for craters with outflows. No craters smaller than 3 km, 43 percent of craters in the 10- to 30-km-diameter range, and 90 percent in the 80- to 100-km-diameter range have associated bright outflows. More melt is produced in the more energetic impact events that produce larger craters. However, three of the four largest craters have no outflows. We present four possible mechanisms for the emplacement of bright outflows. We believe this 'shotgun' approach is justified because all four mechanisms may indeed have operated to some degree.

Late Jurassic plutonism in the southwest U.S. Cordillera

USGS Publications Warehouse

Barth, A.P.; Wooden, J.L.; Howard, K.A.; Richards, J.L.

2008-01-01

Although plate reconstructions suggest that subduction was an approximately steady-state process from the mid-Mesozoic through the early Tertiary, recent precise geochronologic studies suggest highly episodic emplacement of voluminous continental-margin batholiths in the U.S. Cordillera. In central and southern California and western Arizona, major episodes of batholithic magmatism are known to have occurred in Permian-Triassic, Middle Jurassic, and late Early to Late Cretaceous time. However, recent studies of forearc-basin and continental-interior sediments suggest that Late Jurassic time was probably also a period of significant magmatism, although few dated plutons of this age have been recognized. We describe a belt of Late Jurassic plutonic and hypabyssal rocks at least 200 km in length that extends from the northwestern Mojave Desert through the Transverse Ranges. The belt lies outboard of both the voluminous Middle Jurassic arc and the ca. 148 Ma Independence dike swarm at these latitudes. The plutons include two intrusive suites emplaced between 157 and 149 Ma: a calc-alkaline suite compositionally unlike Permian-Triassic and Middle Jurassic mon-zonitic suites but similar to Late Cretaceous arc plutons emplaced across this region, and a contemporaneous but not comagmatic alkaline suite. The Late Jurassic was thus a time of both tectonic and magmatic transitions in the southern Cordillera. ?? 2008 The Geological Society of America.

Erupted frothy xenoliths may explain lack of country-rock fragments in plutons

PubMed Central

Burchardt, Steffi; Troll, Valentin R.; Schmeling, Harro; Koyi, Hemin; Blythe, Lara

2016-01-01

Magmatic stoping is discussed to be a main mechanism of magma emplacement. As a consequence of stoping, abundant country-rock fragments should occur within, and at the bottom of, magma reservoirs as “xenolith graveyards”, or become assimilated. However, the common absence of sufficient amounts of both xenoliths and crustal contamination have led to intense controversy about the efficiency of stoping. Here, we present new evidence that may explain the absence of abundant country-rock fragments in plutons. We report on vesiculated crustal xenoliths in volcanic rocks that experienced devolatilisation during heating and partial melting when entrained in magma. We hypothesise that the consequential inflation and density decrease of the xenoliths allowed them to rise and become erupted instead of being preserved in the plutonic record. Our thermomechanical simulations of this process demonstrate that early-stage xenolith sinking can be followed by the rise of a heated, partially-molten xenolith towards the top of the reservoir. There, remnants may disintegrate and mix with resident magma or erupt. Shallow-crustal plutons emplaced into hydrous country rocks may therefore not necessarily contain evidence of the true amount of magmatic stoping during their emplacement. Further studies are needed to quantify the importance of frothy xenolith in removing stoped material. PMID:27804996

Spring sapping origin of the enigmatic relict valleys of Cape Cod and Martha's Vineyard and Nantucket Islands, Massachusetts

USGS Publications Warehouse

Uchupi, E.; Oldale, R.N.

1994-01-01

Steep-sided, flat-floored linear valleys that lack well developed tributaries and end in amphitheater-like heads are eroded on the outwash plains of Cape Cod, Martha's Vineyard and Nantucket Island. The valleys are restricted from the mid to the distal ends of the outwash plains and show no connection to possible water sources at the updip end of the plains. Their distribution and morphology lead us to propose that they were eroded by groundwater seeps fed by proglacial lakes (the high hydrostatic heads of the lakes led to the elevation of the water table) dammed by the outwash plains and associated moraines. The valleys on Cape Cod were initiated by seeps along the foreset surfaces of sandy deltas emplaced in lakes in Nantucket Sound and Cape Cod Bay after these lakes drained. Those on Martha's Vineyard and Nantucket islands were either eroded by seeps at the distal ends of outwash plain wedges emplaced atop the subareal continental shelf south of the islands or along the foreset surfaces of sandy deltas emplaced on a lake behind a peripheral crustal bulge south of the glacial front. Valley erosion terminated after the lakes were drained and the water table dropped. ?? 1994.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ghosh, A.; Hsiung, S.M.; Chowdhury, A.H.

Long-term stability of emplacement drifts and potential near-field fluid flow resulting from coupled effects are among the concerns for safe disposal of high-level nuclear waste (HLW). A number of factors can induce drift instability or change the near-field flow patterns. Repetitive seismic loads from earthquakes and thermal loads generated by the decay of emplaced waste are two significant factors. One of two key technical uncertainties (KTU) that can potentially pose a high risk of noncompliance with the performance objectives of 10 CFR Part 60 is the prediction of thermal-mechanical (including repetitive seismic load) effects on stability of emplacement drifts andmore » the engineered barrier system. The second KTU of concern is the prediction of thermal-mechanical-hydrological (including repetitive seismic load) effects on the host rock surrounding the engineered barrier system. The Rock Mechanics research project being conducted at the Center for Nuclear Waste Regulatory Analyses (CNWRA) is intended to address certain specific technical issues associated with these two KTUs. This research project has two major components: (i) seismic response of rock joints and a jointed rock mass and (ii) coupled thermal-mechanical-hydrological (TMH) response of a jointed rock mass surrounding the engineered barrier system (EBS). This final report summarizes the research activities concerned with the repetitive seismic load aspect of both these KTUs.« less

A tale of 10 plutons - Revisited: Age of granitic rocks in the White Mountains, California and Nevada

USGS Publications Warehouse

McKee, E.H.; Conrad, J.E.

1996-01-01

40Ar/39Ar incremental heating analysis and conventional K-Ar age determinations on plutonic rocks of the White Mountains define two stages of magmatic emplacement: Late Cretaceous, between ca. 90 Ma and 75 Ma, and Middle-Late Jurassic, between ca. 180 and 140 Ma. The Jurassic stage can be divided into two substages, 180-165 Ma and 150-140 Ma. Thermal effects of the younger plutons on the older granitoids partially to completely reset ages, making it difficult to determine the age of emplacement and cooling of several of the plutons even by 40Ar/39Ar incremental heating analyses. New data together with published ages and regional geochronological synthesis of the Sierra Nevada batholith indicate that regions within the batholith have coherent periods or episodes of magmatic activity. In the White Mountains and Sierra Nevada directly to the west there was little or no activity in Early Jurassic and Early Cretaceous time; magmatism took place during relatively short intervals of 15 m.y. or less in the Middle and Late Jurassic and Late Cretaceous periods. The new K-Ar and 40Ar/39Ar analyses of granitoids from the White Mountains help, but do not completely clarify the complex history of emplacement, cooling, and reheating of the batholith.

Lateral extrusion of a thermally weakened pluton overburden (Campiglia Marittima, Tuscany)

NASA Astrophysics Data System (ADS)

Vezzoni, Simone; Rocchi, Sergio; Dini, Andrea

2018-06-01

The ascent and emplacement of magmas in the upper crust modify the local pre-existing thermal and rheological settings. Such changes have important effects in producing anomalous structures, mass extrusion, rock fracturing, and in some conditions, hydrothermal mineralizations. In the Campiglia Marittima area, detailed field mapping led to the reconstruction of a local deformation history that overlaps, chronologically and spatially, with regional extension. This local deformation was triggered at the Miocene-Pliocene boundary by the intrusion of a monzogranitic pluton beneath a carbonate sedimentary sequence. The emplacement of the pluton produced a perturbation in the rheological behaviour of the carbonate host rocks, producing transient ductile conditions in the very shallow crust. The carbonate rocks were thermally weakened and flowed laterally, accumulating downslope of the pluton roof, mainly toward the east. As the thermal anomaly was decaying, the brittle-ductile boundary moved progressively back towards the pluton, and large tension gash-shaped volumes of fractured marble were generated. These fractured volumes were exploited by rising hydrothermal fluids generating sigmoidal skarn bodies and ore shoots. This work presents the Campiglia Marittima case study as a prime example of structural interference between regional extensional structures and local, lateral mass extrusion in a transient ductile rheological regime triggered by pluton emplacement.

The case for simultaneous deformation, metamorphism and plutonism: an example from Proterozoic rocks in central Arizona

NASA Astrophysics Data System (ADS)

Karlstrom, K. E.; Williams, M. L.

1995-01-01

The syntectonic 1.70 Ga Crazy Basin Monzogranite provides an example of the complex spatial and temporal interactions between metamorphism, deformation, and plutonism. Synchronous plutonism and deformation is indicated by syn-shortening dikes, sills, and veins; parallel magmatic and solid state fabrics; fabrics in xenoliths; and a foliation triple point. Synchronous plutonism and metamorphism is indicated by a systematic increase from 400 °C to 630 °C towards the pluton at a constant pressure of 300 MPa (3 kb). Temperatures are consistent with a conductive cooling model in which a 700 °C pluton was emplaced into country rocks undergoing greenschist facies regional metamorphism. Synchronous deformation and metamorphism is indicated by porphyroblast inclusion geometries that document the synmetamorphic development of the S2 cleavage. The pluton was emplaced adjacent to the Shylock shear zone during progressive shortening. Emplacement of granite as NE-trending sheets was facilitated by temporal partitioning of transpressional convergence into strike-slip and dip-slip components. At the scale of the pluton's aureole and on the relatively rapid time scale of 10 3-10 6 y, regional deformation and metamorphism were punctuated by thermal softening and increased diffusion rates. Data suggests that accretion of Proterozoic arcs in Arizona involved diachronous pluton-enhanced deformation and associated high temperature-low pressure regional metamorphism.

Mesozoic arc magmatism along the southern Peruvian margin during Gondwana breakup and dispersal

NASA Astrophysics Data System (ADS)

Boekhout, Flora; Spikings, Richard; Sempere, Thierry; Chiaradia, Massimo; Ulianov, Alexey; Schaltegger, Urs

2012-08-01

A high-resolution U-Pb zircon geochronological study of plutonic units along the south Peruvian margin between 17° and 18°S allows the integration of the geochemical, geodynamic and tectonic evolution of this part of the Andean margin. This study focuses on the composite Jurassic-early Cretaceous Ilo Batholith that was emplaced along the southern Peruvian coast during two episodes of intrusive magmatism; a first period between 173 and 152 Ma (with a peak in magmatic activity between roughly 168 and 162 Ma) and a second period between 110 and 106 Ma. Emplacement of the Jurassic part of the composite Ilo Batholith shortly post-dated the accumulation of the volcanosedimentary succession it intruded (Chocolate formation), which allows to estimate a subsidence rate for this unit of ~ 3.5 km/Ma. The emplacement of the main peak of Jurassic plutonism of the Ilo Batholith was also closely coeval with widespread and repeated slumping (during deposition of the Cachíos Formation) in the back-arc region, suggesting a common causal link between these phenomena, which is discussed in the context of an observed 100 km trenchward arc migration at ~ 175 Ma, and the relation with extensional tectonics that prevailed along the Central Andean margin during Pangaea break-up.

Constraining Controls on the Emplacement of Long Lava Flows on Earth and Mars Through Modeling in ArcGIS

NASA Astrophysics Data System (ADS)

Golder, K.; Burr, D. M.; Tran, L.

2017-12-01

Regional volcanic processes shaped many planetary surfaces in the Solar System, often through the emplacement of long, voluminous lava flows. Terrestrial examples of this type of lava flow have been used as analogues for extensive martian flows, including those within the circum-Cerberus outflow channels. This analogy is based on similarities in morphology, extent, and inferred eruptive style between terrestrial and martian flows, which raises the question of how these lava flows appear comparable in size and morphology on different planets. The parameters that influence the areal extent of silicate lavas during emplacement may be categorized as either inherent or external to the lava. The inherent parameters include the lava yield strength, density, composition, water content, crystallinity, exsolved gas content, pressure, and temperature. Each inherent parameter affects the overall viscosity of the lava, and for this work can be considered a subset of the viscosity parameter. External parameters include the effusion rate, total erupted volume, regional slope, and gravity. To investigate which parameter(s) may control(s) the development of long lava flows on Mars, we are applying a computational numerical-modelling to reproduce the observed lava flow morphologies. Using a matrix of boundary conditions in the model enables us to investigate the possible range of emplacement conditions that can yield the observed morphologies. We have constructed the basic model framework in Model Builder within ArcMap, including all governing equations and parameters that we seek to test, and initial implementation and calibration has been performed. The base model is currently capable of generating a lava flow that propagates along a pathway governed by the local topography. At AGU, the results of model calibration using the Eldgá and Laki lava flows in Iceland will be presented, along with the application of the model to lava flows within the Cerberus plains on Mars. We then plan to convert the model into Python, for easy modification and portability within the community.

Emplacement and magnetic fabrics of rapakivi granite intrusions within Wiborg and Åland rapakivi granite batholiths in Finland

NASA Astrophysics Data System (ADS)

Karell, Fredrik; Ehlers, Carl; Airo, Meri-Liisa

2014-02-01

Anisotropy of magnetic susceptibility (AMS) studies were carried out in two areas in Finland: the Ruotsinpyhtää intrusion within the Wiborg rapakivi granite batholith and the Saltvik intrusions within the Åland rapakivi granite batholith. The main aim of this study was to understand the emplacement history of these mid-Proterozoic rapakivi granites. Aeromagnetic images reveal structures of ca. 5-10 km intrusions that build up the large rapakivi granite batholiths of Åland and Wiborg. Magnetic susceptibility data from the database of the Geological Survey of Finland, including more than 1700 samples from the Wiborg rapakivi batholith and almost 900 samples from the Åland rapakivi batholith, were compared with measurements from the present study. The mean susceptibility is ca. 1500 μSI for the Wiborg batholith and ca. 10,000 μSI for the Åland batholith. Samples taken for this study demonstrate that the mean value for the Ruotsinpyhtää intrusion is ca. 1200 μSI and for the Saltvik intrusions ca. 24,000 μSI. Thermomagnetic measurements reveal that the magnetic susceptibility is mainly derived either from paramagnetic minerals or from magnetite. The absence of solid-state deformation features such as breccia or contact deformation indicates a cauldron-type subsidence emplacement. The AMS measurements from Ruotsinpyhtää confirm these proposals, with concentric gently dipping magnetic foliations that support a ring complex structure above a piston-type subsidence system. The Saltvik area consists of a number of smaller elliptical intrusions of different rapakivi granites forming a multiple intrusive complex. The magnetic fabric shows a general westward dipping of the pyterlite and eastward dipping of the contiguous even-grained rapakivi granite, which indicates a central inflow of magma batches towards the east and west resulting from a laccolitic emplacement of magma batches, while the main mechanism for space creation was derived from subsidence.

Proximal pyroclastic deposits from the 1989-1990 eruption of Redoubt Volcano, Alaska - stratigraphy, distribution, and physical characteristics

USGS Publications Warehouse

Gardner, C.A.; Neal, C.A.; Waitt, R.B.; Janda, R.J.

1994-01-01

More than 20 eruptive events during the 1989-1990 eruption of Redoubt Volcano emplaced a complex sequence of lithic pyroclastic-flow, -surge, -fall, ice-diamict, and lahar deposits mainly on the north side of the volcano. The deposits record the changing eruption dynamics from initial gas-rich vent-clearing explosions to episodic gas-poor lava-dome extrusions and failures. The repeated dome failures produced lithic pyroclastic flows that mixed with snow and glacial ice to generate lahars that were channelled off Drift glacier into the Drift River valley. Some of the dome failures occurred without precursory seismic warning and appeared to result solely from gravitational instability. Material from the disrupted lava domes avalanched down a steep, partly ice-filled canyon incised on the north flank of the volcano and came to rest on the heavily crevassed surface of the piedmont lobe of Drift glacier. Most dome-collapse events resulted in single, monolithologic, massive to reversely graded, medium- to coarse-grained, sandy pyroclastic-flow deposits containing abundant dense dome clasts. These deposits vary in thickness, grain size, and texture depending on distance from the vent and local topography; deposits are finer and better sorted down flow, thinner and finer on hummocks, and thicker and coarser where ponded in channels cut through the glacial ice. The initial vent-clearing explosions emplaced unusual deposits of glacial ice, snow, and rock in a frozen matrix on the north and south flanks of the volcano. Similar deposits were described at Nevado del Ruiz, Columbia and have probably been emplaced at other snow-and-ice-clad volcanoes, but poor preservation makes them difficult to recognize in the geologic record. In a like fashion, most deposits from the 1989-1990 eruption of Redoubt Volcano may be difficult to recognize and interpret in the future because they were emplaced in an environment where glacio-fluvial processes dominate and quickly obscure the primary depositional record. ?? 1994.

Investigating Magmatic Processes in the Lower Levels of Mantle-derived Magmatic Systems: The Age & Emplacement of the Kunene Anorthosite Complex (SW Angola)

NASA Astrophysics Data System (ADS)

Hayes, B.; Bybee, G. M.; Owen-Smith, T.; Lehmann, J.; Brower, A. M.; Ashwal, L. D.; Hill, C. M.

2017-12-01

Our understanding of mantle-derived magmatic systems has shifted from a notion of upper crustal, melt-dominated magma chambers that feed short-lived volcanic eruptions, to a view of more long-lived trans-crustal, mush-dominated systems. Proterozoic massif-type anorthosite systems are voluminous, plagioclase-dominated plutonic suites with ubiquitous intermediate compositions (An 50 ± 10) that represent mantle-derived magmas initially ponded at Moho depths and crystallized polybarically until emplacement at mid-crustal levels. Thus, these systems provide unique insight into magma storage and processing in the lower reaches of the magma mush column, where such interpretation has previously relied on cumulate xenoliths in lavas, geophysical data and experimental/numerical modeling. We present new CA-ID-TIMS ages and a series of detailed field observations from the largest Proterozoic anorthosite massif on Earth, the Kunene Anorthosite Complex (KAC) of SW Angola. Field structures indicate that (i) the bulk of the material was emplaced in the form of crystal mushes, as both plutons and sheet-like intrusions; (ii) prolonged magmatism led to cumulate disaggregation (block structure development) and remobilization, producing considerable textural heterogeneity; (iii) crystal-rich magmatic flow induced localized recrystallization and the development of protoclastic (mortar) textures; and (iv) late residual melts were able to migrate locally prior to complete solidification. Dating of pegmatitic pods entrained from cumulate zones at the base of the crust (1500 ± 13 Ma) and their host anorthosites (1375-1438 Ma) reveals time periods in the range of 60-120 Myr between the earliest products of the system and the final mushes emplaced at higher crustal levels. Therefore, the KAC represents a complex, mushy magmatic system that developed over a long period of time. Not only do these observations help in refining our understanding of Proterozoic anorthosite petrogenesis, they also allow us to place constraints on the types of magmatic processes that operate in the lower levels of other trans-crustal magmatic systems.

Sensor Emplacement Techniques and Seismic Noise Analysis for USArray Transportable Array Seismic Stations

NASA Astrophysics Data System (ADS)

Frassetto, A.; Busby, R. W.; Hafner, K.; Woodward, R.; Sauter, A.

2013-12-01

In preparation for the upcoming deployment of EarthScope's USArray Transportable Array (TA) in Alaska, the National Science Foundation (NSF) has supported exploratory work on seismic station design, sensor emplacement, and communication concepts appropriate for this challenging high-latitude environment. IRIS has installed several experimental stations to evaluate different sensor emplacement schemes both in Alaska and in the lower-48 of the U.S. The goal of these tests is to maintain or enhance a station's noise performance while minimizing its footprint and the weight of the equipment, materials, and overall expense required for its construction. Motivating this approach are recent developments in posthole broadband seismometer design and the unique conditions for operating in Alaska, where there are few roads, cellular communications are scarce, most areas are only accessible by small plane or helicopter, and permafrost underlies much of the state. We will review the methods used for directly emplacing broadband seismometers in comparison to the current methods used for the lower-48 TA. These new methods primarily focus on using a portable drill to make a bored hole three to five meters, beneath the active layer of the permafrost, or by coring 1-2 meters deep into surface bedrock. Both methods are logistically effective in preliminary trials. Subsequent station performance has been assessed quantitatively using probability density functions summed from power spectral density estimates. These are calculated for the continuous time series of seismic data recorded for each channel of the seismometer. There are five test stations currently operating in Alaska. One was deployed in August 2011 and the remaining four in October 2012. Our results show that the performance of seismometers in Alaska with auger-hole or core-hole installations can sometimes exceed that of the quietest TA stations in the lower-48, particularly horizontal components at long periods. A comparison of the performance of the various installations is discussed.

On thermohydrologic conditions near high-level nuclear wastes emplaced in partially saturated fractured tuff: 1. Simulation studies with explicit consideration of fracture effects

NASA Astrophysics Data System (ADS)

Pruess, K.; Wang, J. S. Y.; Tsang, Y. W.

1990-06-01

We have performed modeling studies on the simultaneous transport of heat, liquid water, vapor, and air in partially saturated, fractured porous rock. Formation parameters were chosen as representative of the potential nuclear waste repository site in the Topopah Spring unit of the Yucca Mountain tuffs. The presence of fractures makes the transport problem very complex, both in terms of flow geometry and physics. The numerical simulator used for our flow calculations takes into account most of the physical effects believed to be important in multiphase fluid and heat flow. It has provisions for handling the extreme nonlinearities that arise in phase transitions, component disappearances, and capillary discontinuities at fracture faces. We model a region around an infinite linear string of nuclear waste canisters, taking into account both the discrete fractures and the porous matrix. Thermohydrologic conditions in the vicinity of the waste packages are found to depend strongly on relative permeability and capillary pressure characteristics of the fractures, which are unknown at the present time. If liquid held on the rough walls of drained fractures is assumed to be mobile, strong heat pipe effects are predicted. Under these conditions the host rock will remain in two-phase conditions right up to the emplacement hole, and formation temperatures will peak near 100°C. If it is assumed that liquid cannot move along drained fractures, the region surrounding the waste packages is predicted to dry up, and formation temperatures will rise beyond 200°C. A substantial fraction of waste heat can be removed if emplacement holes are left open and ventilated, as opposed to backfilled and sealed emplacement conditions. Comparing our model predictions with observations from in situ heater experiments reported by Zimmerman and coworkers, some intriguing similarities are noted. However, for a quantitative evaluation, additional carefully controlled laboratory and field experiments will be needed.

New Radiolarian Age Constraints on the Emplacement History of the Manipur Ophiolitic Complex, India: the Timing of 'soft Collision'

NASA Astrophysics Data System (ADS)

Kachovich, S.; Aitchison, J. C.; Lokho, K.; Stojanovic, D.

2016-12-01

The Manipur Ophiolite complex in the Indo-Burman ranges is characterised by a north-south trending belt of ophiolitic and related oceanic volcanic and sedimentary rocks. The ophiolite is considered to have formed in Jurassic time as part of an intra-oceanic subduction zone. It was subsequently emplaced onto the continental margin of India. Although the ophiolite is extensively disrupted, well-exposed outcrops exist in new road cuttings. We present new results from investigations of associated oceanic pelagic sequences amongst which radiolarian microfossils help to constrain the timing for the emplacement event. Pelagic sediments assigned to the Disang Formation that crop out near Khamasom village, west of Ukhrul city are characterised by extensive fault-bounded packages of reddish-coloured, radiolarian-bearing mudstones. They yield abundant well-preserved, late Palaeocene to early Eocene radiolarians. As the ophiolitic rocks are thrust over these radiolarian-bearing sediments, they provide a precise biostratigraphic maximum age with which to constrain any ophiolite emplacement event. Elsewhere along the length of the Indus-Yarlung Tsangpo suture zone from NW India (Spongtang, Ladakh) in the west as well as at Zhongba, Sangdanlin and Gyantse across Tibet, correlative radiolarian faunas provide similar age constraints suggesting that this event was broadly coeval. Collision of an intra-oceanic island arc system with northern margin of the Indian continent over such an extensive strike length must be of regional significance. Moreover, given that this was an intra-Tethyan system it's collision (the `soft-collision' postulated by Curray et al. 1982) must pre-date later (hard) continent-continent collision. Reference: Curray, J.R., Emmel, F.J., Moore, D.G., Raitt, R.W., 1982. Structure, tectonics, and geological history of the northeastern Indian Ocean. In; Nairn, A.E.M. The Ocean Basins and Margins vol. 6: 399-450, Plenum Press.

Thermally-assisted Magma Emplacement Explains Restless Calderas

NASA Astrophysics Data System (ADS)

Amoruso, A.; Crescentini, L.; D'Antonio, M.; Acocella, V.

2017-12-01

Many calderas show repeated unrest over centuries. Though probably induced by magma, this unique behaviour is not understood and its dynamics remains elusive. To better understand these restless calderas, we interpret deformation data and build thermal models of Campi Flegrei, Italy, which is the best-known, yet most dangerous calderas, lying to the west of Naples and restless since the 1950s at least.Our elaboration of the geodetic data indicates that the inflation and deflation of magmatic sources at the same location explain most deformation, at least since the build-up of the last 1538 AD eruption. However, such a repeated magma emplacement requires a persistently hot crust.Our thermal models show that the repeated emplacement was assisted by the thermal anomaly created by magma that was intruded at shallow depth 3 ka before the last eruption and, in turn, contributed to maintain the thermal anomaly itself. This may explain the persistence of the magmatic sources promoting the restless behaviour of the Campi Flegrei caldera; moreover, it explains the crystallization, re-melting and mixing among compositionally distinct magmas recorded in young volcanic rocks.Available information at other calderas highlights similarities to Campi Flegrei, in the pattern and cause of unrest. All monitored restless calderas have either geodetically (Yellowstone, Aira Iwo-Jima, Askja, Fernandina and, partly, Long Valley) or geophysically (Rabaul, Okmok) detected sill-like intrusions inducing repeated unrest. Some calderas (Yellowstone, Long Valley) also show stable deformation pattern, where inflation insists on and mimics the resurgence uplift. The common existence of sill-like sources, also responsible for stable deformation patterns, in restless calderas suggests close similarities to Campi Flegrei. This suggests a wider applicability of our model of thermally-assisted sill emplacement, to be tested by future studies to better understand not only the dynamics of restless calderas and their eruptive potential but also the growth and assemblage of igneous intrusions and plutons.

The glaciovolcanic evolution of an andesitic edifice, South Crater, Tongariro volcano, New Zealand

NASA Astrophysics Data System (ADS)

Cole, R. P.; White, J. D. L.; Conway, C. E.; Leonard, G. S.; Townsend, D. B.; Pure, L. R.

2018-02-01

Unusual deposits, mapped and logged in detail, around the summit area of Tongariro volcano, Tongariro Volcanic Centre, New Zealand indicate that the construction and evolution of a substantial portion of this andesitic stratovolcano was beneath a significant ice cap or summit glacier. As the edifice was built under and through the overlying ice, the style of volcanism evolved in a complex history of growth. Initially, a ≥ 100 m thick, widespread hyaloclastite deposit was emplaced within a subglacial, eruption-formed meltwater lake. This was followed by several phases of effusive and explosive eruptions, producing lava flows and primary volcaniclastic deposits emplaced along channels carved into the ice by heated meltwater. The clastic deposits contain quenched bombs and structural features that indicate waterlain transport and emplacement, and soft sediment deformation. Such accumulation of water on a steep-sided edifice without evidence for a subaerial crater lake, along with lava flow features indicating confinement, suggest that a substantial summit glacier was responsible for the production and retention of water, and the architecture of these deposits. Recent studies at nearby Ruapehu volcano have provided good evidence for glaciovolcanic interactions during the last glacial period. However, until now, little was known of the physical lava-ice interactions in the Centre during the last interglacial period and the earlier part of the last glacial period (110-64 ka). These new data support a reinterpretation for the volcanic evolution of the older Tongariro edifice and the emplacement mechanisms of primary volcaniclastic deposits. They also help to constrain local ice thicknesses and extents at the times of eruption. In addition, this study contributes to a sparse global catalogue of glaciovolcanic deposits of andesitic composition, particularly of primary volcaniclastics preserved at mid-latitude stratovolcanoes. The variety of deposit types indicates a volcano building and evolving with glaciation and is an outstanding example of the types of glaciovolcanic interaction that can occur at one volcano.

Forced folding and complex overburden deformation associated with magmatic intrusion in the Vøring Basin, offshore Norway

NASA Astrophysics Data System (ADS)

Omosanya, Kamaldeen Olakunle; Johansen, Ståle E.; Eruteya, Ovie Emmanuel; Waldmann, Nicolas

2017-06-01

In this study, three-dimensional seismic reflection and borehole data from the Vøring Basin, offshore Norway have been used to characterize a supra-sill related forced fold to understand its evolution and relevance in the context of regional tectonics. Magmatic sills were recognised to be positive high-amplitude anomalies with similar polarity to the seabed reflection. The seismic dataset reveals two groups of sills in the study area comprising interconnected sills beneath the regional forced fold, and those intruded into the overburden. Magmatic sills forming the interconnected sill complex are emplaced at a depth of about 5.5 s TWTT below the modern seafloor. Aspect ratio (length/width), A for the sills ranges from 1.63-6.90. The regional forced fold is interpreted based on its bathymetric and seismic-stratigraphic expression on horizon H7, which is part of the Palaeocene to Eocene Tang Formation. Amplitude of the accommodation fold is about 780 km2. Hydrothermal vent complexes and fluid-flow conduits in the study area develop above the sill edges and on the flanks of the interconnected sill complex extending from the lower part of the Tang Formation to the uppermost section of the Brygge Formation evidencing vertically focussed fluid flow in the study area. The overlying overburden is in turn deformed and structurally compartmentalized through forced folding and Late Cenozoic tectonics. We demonstrate that accommodation folding is formed in response to the emplacement of several interconnected sills during the opening of the Norwegian-Greenland Seas. Sill emplacement in the study area causes uplift of the Cretaceous to Palaeocene depocentre prior to further restructuration during Cenozoic tectonic inversion. Magmatic intrusions documented in this study have wider implications for understanding supra-sill deformations along volcanic margins with well-developed emplaced sills at depth and likewise hydrocarbon prospectivity in the study area.

A model for radial dike emplacement in composite cones based on observations from Summer Coon volcano, Colorado, USA

USGS Publications Warehouse

Poland, Michael P.; Moats, W.P.; Fink, J.H.

2008-01-01

We mapped the geometry of 13 silicic dikes at Summer Coon, an eroded Oligocene stratovolcano in southern Colorado, to investigate various characteristics of radial dike emplacement in composite volcanoes. Exposed dikes are up to about 7 km in length and have numerous offset segments along their upper peripheries. Surprisingly, most dikes at Summer Coon increase in thickness with distance from the center of the volcano. Magma pressure in a dike is expected to lessen away from the pressurized source region, which would encourage a blade-like dike to decrease in thickness with distance from the center of the volcano. We attribute the observed thickness pattern as evidence of a driving pressure gradient, which is caused by decreasing host rock shear modulus and horizontal stress, both due to decreasing emplacement depths beneath the sloping flanks of the volcano. Based on data from Summer Coon, we propose that radial dikes originate at depth below the summit of a host volcano and follow steeply inclined paths towards the surface. Near the interface between volcanic cone and basement, which may represent a neutral buoyancy surface or stress barrier, magma is transported subhorizontally and radially away from the center of the volcano in blade-like dikes. The dikes thicken with increasing radial distance, and offset segments and fingers form along the upper peripheries of the intrusions. Eruptions may occur anywhere along the length of the dikes, but the erupted volume will generally be greater for dike-fed eruptions far from the center of the host volcano owing to the increase in driving pressure with distance from the source. Observed eruptive volumes, vent locations, and vent-area intrusions from inferred post-glacial dike-fed eruptions at Mount Adams, Washington, USA, support the proposed model. Hazards associated with radial dike emplacement are therefore greater for longer dikes that propagate to the outer flanks of a volcano. ?? Springer-Verlag 2007.

An early extensional event of the South China Block during the Late Mesozoic recorded by the emplacement of the Late Jurassic syntectonic Hengshan Composite Granitic Massif (Hunan, SE China)

NASA Astrophysics Data System (ADS)

Wei, Wei; Chen, Yan; Faure, Michel; Martelet, Guillaume; Lin, Wei; Wang, Qingchen; Yan, Quanren; Hou, Quanlin

2016-03-01

Continental scaled extension is the major Late Mesozoic (Jurassic and Cretaceous) tectonic event in East Asia, characterized by faulting, magmatic intrusions and half-grabens in an area with a length of > 5000 km and a width of > 1000 km. Numerous studies have been conducted on this topic in the South China Block (SCB), However, the space and time ranges of the compressional or extensional regimes of the SCB during the Jurassic are still unclear, partly due to the lack of structural data. The emplacement fabrics of granitic plutons can help determine the regional tectonic background. In this study, a multidisciplinary approach, including Anisotropy of Magnetic Susceptibility (AMS), macro and microstructural analyses, quartz c-axis preferred orientation, gravity modeling and monazite EPMA dating, was conducted on the Hengshan composite granitic massif in SCB that consists of the Triassic Nanyue biotite granitic pluton and the Late Jurassic Baishifeng two-mica granitic pluton. The magnetic fabrics are characterized by a consistent NW-SE oriented lineation and weakly inclined foliation. A dominant high temperature deformation with a top-to-the-NW shear sense is identified for both plutons. The deformation increasing from the center of the Baishifeng pluton to its western border is associated to the development of the West Hengshan Boundary Fault (WHBF). The gravity modeling shows a ;saw tooth-shaped; NE-SW oriented structure of the Baishifeng pluton, which may be considered as NE-SW oriented tension-gashes formed due to the NW-SE extension. All results show that the Triassic Nanyue pluton was deformed under post-solidus conditions by the WHBF coeval with the emplacement of the Late Jurassic Baishifeng pluton. All these observations comply with the NW-SE extensional tectonics coeval with the emplacement of the Baishifeng pluton, which argues that the NW-SE crustal stretching started since the Late Jurassic, at least in this part of the SCB.

Constraints on the magnitude and rate of carbon dioxide dissolution at Bravo Dome natural gas field

NASA Astrophysics Data System (ADS)

Sathaye, K.; Hesse, M. A.

2013-12-01

The Bravo Dome field in northeastern New Mexico contains at least 10 trillion cubic feet (tcf) of magmatic CO2. The CO2 has been emplaced in the reservoir for at least 10,000 years, providing a useful analog for geologic CO2 storage. The reservoir is comprised of a CO2 gas layer overlying brine water in a sandstone reservoir. Previous estimates have used differences in the CO2/3He ratio in the gas to infer that locally, half of the CO2 originally emplaced has dissolved into the underlying brine. This study presents the first estimate of the total amount of CO2 dissolved. We incorporate gas pressure, reservoir geometry, and gas layer thickness to show that over 80% of the CO2 originally emplaced is still present in the gas layer. It is generally assumed that the dissolution of CO2 is driven by convective currents in the brine. We present an alternative hypothesis for the spatial differences of the CO2/3He ratio seen in this reservoir. Gas injection theory predicts that as gas displaces a liquid, relatively insoluble gas components will become enriched at the front of the displacement. If the emplacement occurred from west to east this would cause 3He enrichment in the eastern portion of the Bravo Dome field overlying the brine. This effect could be responsible for the spatial differences in the CO2/3He ratio. Mass per area in the gas layer of the reservoir is seen in the 2 right panes. The measured bottom hole pressure data from 1981 is used in combination with CO2/3He measurements to estimate the mass of CO2 originally in place. The water thickness is inversely correlated with the CO2/3He ratio, suggesting that there may be convective dissolution occurring in the eastern part of the reservoir. Present day mass of CO2 is roughly 83% of the original total.

Emplacement temperature estimation of the 2015 dome collapse of Volcán de Colima as key proxy for flow dynamics of confined and unconfined pyroclastic density currents

NASA Astrophysics Data System (ADS)

Pensa, Alessandra; Capra, Lucia; Giordano, Guido; Corrado, Sveva

2018-05-01

The recent 10th-11th of July 2015 Volcán de Colima eruption involved the collapse of the summit dome that breached to the south generating pyroclastic density currents (PDCs) along the Montegrande ravine on the southern flank of the volcano. Trees within the valley were buried, uprooted and variably transported by the PDCs, while the trees on the edges of the valley and on the overbanks, were mainly burned and folded. The emplacement temperature of valley confined and overbank PDC deposits were reconstructed using Partial Thermal Remanent Magnetization (pTRM) analysis of lithic clasts and Charcoal Reflectance analysis (Ro %) applied to the charred wood. A total of 13 sites were sampled for the pTRM study and 39 charcoaled wood fragments were collected for the charcoal optical analysis along the entire deposit length in order to detect temperature variation from proximal to distal zone. The result overlap from both data sets display a T max from ≃345°-385 °C in valley-confined area (from 3.5 to 8.5 km from the vent) and ≃170°-220 °C (from 8.0 to 10.5 km from the vent) in unconfined distal area. The emplacement temperature pattern along the 10.5 km long deposit appears related to the degree of topography confinement: valley confined and unconfined. In particular the valley confined setting is very conservative in terms of temperature, while the major drop occurs in a very narrow space where the PDC expanded over unconfined flat topography just at the exit of the main valley. This study represents the first attempt in determining the relationship between PDCs flow dynamics variation and topographic confining using deposit emplacement temperature as key proxy.

Origin of a late Neoproterozoic (605 ± 13 Ma) intrusive carbonate-albitite complex in Southern Sinai, Egypt

NASA Astrophysics Data System (ADS)

Azer, Mokhles Kamal; Stern, Robert J.; Kimura, Jun-Ichi

2010-03-01

New geochemical, isotopic, and geochronological data and interpretations are presented for late Neoproterozoic intrusive carbonates and related rocks of southern Sinai, Egypt (northernmost Arabian-Nubian Shield). The Tarr carbonates are coarsely crystalline and related to explosive emplacement of hypabyssal and volcanic albitite at 605 ± 13 Ma. The carbonates associated with the albitites are divisible into two types: primary dolomitite and secondary breunneritite (Fe-rich magnesite). The dolomitite was clearly intrusive but differs from classic igneous carbonatites, containing much lower abundances of incompatible elements, such as REE, U, Th, Rb, Nb, Y, P, Sr, Zr, Ba, and total alkalies. The breunneritite is a secondary replacement of dolomitite, probably marking the roots of a vigorous hydrothermal system. Albitites show pristine abundances of major and trace elements and were not subjected to a major metamorphic overprint. They are relatively more fractionated, alkaline and related to within-plate A-type magmas, were emplaced in an extensional or non-compressive tectonic regime in the cupola of high-level A-type granite. Tarr albitites may represent residual magma remaining after near-total crystallization of an A-type granite pluton at depth, forcibly emplaced into the roof above the cooling pluton. The intrusive dolomitite exsolved from highly differentiated albitite melt, in the apical regions of a still-buried alkaline “A-type” granite pluton that was rich in CO2; these volatiles migrated upwards and towards the cooler margins of the magma body. Late NNE-SSW extension allowed a shallow-level cupola to form, into which albitite melts and carbonate fluids migrated, culminating in explosive emplacement of albitite breccia and intrusive carbonate. Isotopic compositions of Tarr dolomitite and albitite indicate these are consanguineous and ultimately of mantle origin. Magmatic volatiles fenitized the wall rock, while submarine hydrothermal activity transformed some of the dolomitite into breunneritite. Recognition of Tarr-type should encourage similar hypabyssal complex intrusions to be sought for in association with A-type granitic plutons elsewhere.

Geology of the Ishmas gold district, Kingdom of Saudi Arabia

USGS Publications Warehouse

Doebrich, Jeff L.; White, Willis M.

1991-01-01

The Ishmas gold district was mapped at 1:25,000 scale to place auriferous mineralization into geologic perspective, to assist in creating an ore-deposit model, and to aid in devising a strategy for subsequent exploration elsewhere in the Jabal Ishmas-Wadi Tathlith gold belt. The precratonic evolution of the district began with the deposition of a tholeiitic mafic volcanic and volcaniclastic sequence that was intruded by diabase and gabbro. Basaltic to rhyodacitic volcanism following a calc-alkaline evolutionary trend ensued. Subsequent deposition of a thick wacke and sandstone unit represented the final phase in the volcano sedimentary accumulation. The emplacement of a large lopolithic layered-gabbro complex marked the end of the precratonic evolutionary cycle. The district coincides with the boundary of two allochthonous terranes. The collisional Nabitah orogeny represents the suturing of the two terranes. The effects of this event are manifested by numerous north-trending, steeply dipping faults, shear zones, and mylonite belts, as well as diapiric serpentinite. During the waning stages of the orogeny, auriferous quartz pods were precipitated in dilatant structures within the north-trending shear zones by deep-seated circulating fluids. The emplacement of a tonalite stock was closely followed by the formation of N. 20°-35° W. -trending faults. These faults influenced the emplacement of dacite porphyry stocks and associated auriferous quartz veins. The auriferous veins are massive, tabular open-fracture fillings that are spatially, temporally, and genetically related to the dacite porphyry. The emplacement of a quartz monzodiorite stock was responsible for additional auriferous quartz vein mineralization that is almost exclusively hosted by the intrusion. A nearly random orientation of the veins indicates that no regional structure influenced their formation. The formation of a series of N. 60°-80° W -trending faults represents the final episode in the district's geologic history and corresponds to the cratonic reactivation that affected a large part of the Arabian Shield (that is, the Najd faulting event). 

Sensor emplacement testing at Poker Flat, Alaska

NASA Astrophysics Data System (ADS)

Reusch, A.; Beaudoin, B. C.; Anderson, K. E.; Azevedo, S.; Carothers, L.; Love, M.; Miller, P. E.; Parker, T.; Pfeifer, M.; Slad, G.; Thomas, D.; Aderhold, K.

2013-12-01

PASSCAL provides equipment and support for temporary seismic projects. Speed and efficiency of deployments are essential. A revised emplacement technique of putting broadband sensors directly into soil (aka direct burial) is being tested. The first phase (fall 2011 to spring 2013) comparing data quality and sensor stability between the direct burial and the traditional 1 m deep temporary PASSCAL-style vault in a wet and noisy site near San Antonio, NM is complete. Results suggest there is little or no difference in sensor performance in the relatively high-noise environment of this initial test. The second phase was started in November 2012 with the goal of making the same comparison, but at Poker Flat, Alaska, in a low-noise, high-signal, cold and wet environment, alongside a Transportable Array (TA) deployment to be used as a performance control. This location is in an accessible and secure area with very low site noise. In addition to benefiting future worldwide PASSCAL deployments, the Poker Flat experiment serves a secondary purpose of testing modifications necessary to successfully deploy and recover broadband stations in a cold environment with the limited logistics anticipated for remote Flexible Array (FA) and PASSCAL Program deployments in Alaska. Developing emplacement techniques that maintain high data quality and data return while minimizing logistics is critical to enable principle investigators to effectively and efficiently co-locate within the future TA Alaska footprint. Three Nanometrics sensors were installed in November 2012 in power-augered holes 76 cm in depth: a Trillium Compact Posthole (PH) and two Trillium 120PH units (one standard PH and one enhanced PHQ). The installations took less than 8 hours in -30°C conditions with 4 hours of usable daylight. The Compact PH and the 120PHQ are delivering data in realtime, while the 120PH is testing standalone power and data collection systems. Preliminary results compare favorably to each other as well as the nearby Trillium 240 in a traditional TA surface vault and a 120PH in a 5 m machine-drilled borehole. This summer, two Trillium 120PA sensors were installed at a depth of 54 cm in traditional PASSCAL-style vaults, adjacent to the Trillium Compact PH, Trillium 120PH and 120PHQ emplacements. Analysis of the data collected from these five sensors will include the use of probability density functions of power spectral density to examine temporal trends in noise, signal-to-noise ratios for local, regional, and teleseismic earthquakes, and coherence of both noise and earthquake signal recordings to compare the data quality of direct burial versus temporary PASSCAL-style vaults sensor emplacements.

Investigating the anisotropy of magnetic susceptibility and other rock magnetic properties of the Beaver River Diabase in northeastern Minnesota

NASA Astrophysics Data System (ADS)

Hariri, S. H.; Brownlee, S. J.; Feinberg, J. M.; Jackson, M. J.; Miller, J. D.

2013-12-01

The Beaver River Diabase (BRD) is a series of mafic dikes and sills within the Beaver Bay Complex (BBC) of northern Minnesota, which formed during the development of the ~1.1 Ga Midcontinent Rift (MCR). The BRD is one of the youngest and most extensive intrusive phases of the BBC. The BRD dikes and sills were emplaced into the medial levels of the 6-10 kilometer-thick North Shore Volcanic Group and occur over an arcuate area extending 120 by 20 kilometers. The BRD is composed of fine- to medium-grained ophitic olivine gabbro and does not display obvious foliation or lineation features and rarely displays modal layering. Without obvious magmatic internal structures, it is difficult to determine emplacement properties such as flow direction using standard geologic mapping or petrographic techniques. For this reason, we measured the anisotropy of magnetic susceptibility (AMS), in conjunction with other rock magnetic properties, to better understand the BRD's emplacement and deformation history in the context of the MCR. AMS measures the directional dependence of low-field magnetic susceptibility, and is used to infer a shape-preferred orientation of magnetic minerals within a rock, which can be related to specific emplacement mechanisms (e.g. directional flow or settling). Preliminary analysis of AMS at 20 sites within the southern half of the BRD (with 4-7 samples per site) shows maximum susceptibility values between 4.48 x 10-6 and 2.22 x 10-4 m3/kg (1165 and 65400 μSI). Most specimens display nearly isotropic AMS ellipsoids (Pj < 1.15) with minor degrees of prolateness and oblateness. However, about 20% of specimens have higher anisotropies (Pj between 1.15 and 1.67) and higher degrees of oblateness and prolateness. Variations in AMS properties may reflect differences in concentration and composition, as well as emplacement mechanisms. Measurements of susceptibility as a function of temperature yield Curie points between 470 and 570 °C, indicating a presence of low-titanium titanomagnetite. Major hysteresis loops and first order reversal curve (FORC) experiments show coercivities between 1 and 125 mT, with a bulk average microcoercivity of 25 mT, consistent with titanomagnetite as the dominant remanence carrier. Further analysis will also investigate the relationship of AMS to rock fabric by measuring mineral crystal preferred orientations using electron backscatter diffraction. These measurements will supplement the AMS data, and provide links to the role of microstructure, texture and mineralogy in AMS.

Sill and Laccolith growth by Inflation and Propagation--just not necessarily at the same time

NASA Astrophysics Data System (ADS)

Currier, R. M.; Marsh, B. D.

2013-12-01

Sill and laccolith growth is achieved by two key mechanisms, inflation (vertical growth) and propagation (radial growth). Of the myriad of models proposed for magmatic intrusion, all are variations on the same theme--some combination of inflation and propagation. Because of the inherent observational limitations in studying actual high-level crustal magma emplacement, there remains a poor consensus on any preferred model. To gain insight we have performed a series of simple experiments using layered gelatin as a viscoelastic crustal analog, and molten wax as magma analog. Wax is injected from the base of the gelatin mold, begins ascent as a dike, and is captured by the overlying, more rigid, layer of gelatin. The use of a solidifying magma analog separates these experiments from other gelatin-based studies. When water is used, a common choice for magma analog, the intrusion propagates in an extremely smooth manner. However, at the tip of any magma filled crack, where thickness is at a minimum, propagation and solidification are in fierce competition. The introduction of solidification reveals that emplacement actually occurs as a series of ensuing pulses--at times propagating and inflating concurrently, and at other times growth is achieved solely through propagation, or solely inflation. Unlike models without solidification, here no single combination of propagation and inflation accounts for growth, but rather, the different styles of emplacement reflect the relative competitiveness of propagation and solidification at that time and location. When propagation is fast relative to solidification, growth is smooth, and propagation and inflation occur simultaneously. When solidification dominates, propagation ceases, and growth by inflation becomes the chief emplacement mechanism. Nevertheless, regardless of the strong effect of solidification, building backpressure and the associated crack stresses can disrupt the chill zone at the sill edge, and bring on rapid propagation of magma in conjunction with overall sill deflation. Because the competitiveness of solidification increases with decreasing propagation velocity, and because propagation velocity of a growing magma body must necessarily decrease with time, these mechanisms are a fundamental feature of any magma body that grows for any extended period. Generally, larger flux rates correlate to larger radii and thinner sills. For classical laccolith formation, flux rate must be slow enough for solidification to curtail propagation at an early stage, effectively limiting radial growth and promoting further growth solely via inflation. The effects of this overall process occurs on multiple scales, and the history of the chilled margins can be clearly seen with a series of essentially ';chatter rinds' marking the staccato process of emplacement.

Rapid thermal rejuvenation of high-crystallinity magma linked to porphyry copper deposit formation; evidence from the Koloula Porphyry Prospect, Solomon Islands

NASA Astrophysics Data System (ADS)

Tapster, S.; Condon, D. J.; Naden, J.; Noble, S. R.; Petterson, M. G.; Roberts, N. M. W.; Saunders, A. D.; Smith, D. J.

2016-05-01

Magmas containing the components needed to form porphyry copper deposits are relatively common within arcs, yet mineralising events are uncommon within the long-lived magmatic systems that host them. Understanding what causes the transition from barren to productive intrusions is critical to the development of conceptual deposit models. We have constrained the tempo of pre- and syn-mineralisation magmatic events in relationship to the thermal evolution of the plutonic body that underlies one of the world's youngest exposed plutonic-porphyry systems, the Inamumu Zoned Pluton, Koloula Porphyry Prospect, Solomon Islands. High precision ID-TIMS U-Pb dates of texturally and chemically characterised zircons indicate pluton emplacement over <150 kyr was superseded after ca. 50 kyr by two discrete episodes of mineralising porphyritic melt emplacement. Their associated hydrothermal systems initiated within ca. 30 kyrs of each other. Zircon populations within evolved intrusions contain resorbed cores that were recycled from the deeper magmatic system, yet their youngest dates are statistically indistinguishable from those yielded by crystals lacking resorption. Comparisons of Ti-in-zircon proxy temperatures, modelled zircon saturation temperatures and temperature-crystallinity relationships suggest that prior to being heated and emplaced within the shallow level pluton, magmas were stored at depth in a high-crystallinity (>50% crystals) state, past the point of rheological lock-up. We estimate that thermal rejuvenation of the deeper high-crystallinity magma and generation of a mobile melt fraction may have occurred ≤10 kyr before its transport and emplacement within the porphyry environment. The underlying pluton likely cooled and returned to high-crystallinity states prior to subsequent remobilisation-emplacement events. Titanium-in-zircon geothermometry and whole-rock geochemistry suggest pre-mineralisation intrusions were remobilised by mixing of a silicic magma with a high-temperature, less-evolved melt. In contrast, syn-mineralisation melts were most likely remobilised by the percolation of hot volatiles exsolved from contemporaneous less-evolved intrusions cooling beneath the crystalline silicic magma. The evidence for the rapid thermal rejuvenation and long term storage of highly crystalline silicic magmas is consistent with previous studies that indicate two components of exsolved volatiles contribute to ore forming fluids. We conclude that the liberation of crystal-rich porphyry copper deposit forming magmas, and the addition of the chemical components required for ore formation, are intrinsically linked to the volatiles released during the recharge of less-evolved melt into a highly crystalline silicic magma.

Morphology and Composition of Localized Lunar Dark Mantle Deposits With LROC Data

NASA Astrophysics Data System (ADS)

Gustafson, O.; Bell, J. F.; Gaddis, L. R.; Hawke, B. R.; Robinson, M. S.; LROC Science Team

2010-12-01

Clementine color (ultraviolet, visible or UVVIS) and Lunar Reconnaissance Orbiter (LRO) Wide Angle (WAC) and Narrow Angle (NAC) camera data provide the means to investigate localized lunar dark-mantle deposits (DMDs) of potential pyroclastic origin. Our goals are to (1) examine the morphology and physical characteristics of these deposits with LROC WAC and NAC data; (2) extend methods used in earlier studies of lunar DMDs with Clementine spectral reflectance (CSR) data; (3) use LRO WAC multispectral data to complement and extend the CSR data for compositional analyses; and (4) apply these results to identify the likely mode of emplacement and study the diversity of compositions among these deposits. Pyroclastic deposits have been recognized all across the Moon, identified by their low albedo, smooth texture, and mantling relationship to underlying features. Gaddis et al. (2003) presented a compositional analysis of 75 potential lunar pyroclastic deposits (LPDs) based on CSR measurements. New LRO camera (LROC) data permit more extensive analyses of such deposits than previously possible. Our study began with six sites on the southeastern limb of the Moon that contain nine of the cataloged 75 potential pyroclastic deposits: Humboldt (4 deposits), Petavius, Barnard, Abel B, Abel C, and Titius. Our analysis found that some of the DMDs exhibit qualities characteristic of fluid emplacement, such as flat surfaces, sharp margins, embaying relationships, and flow textures. We conclude that the localized DMDs are a complex class of features, many of which may have formed by a combination of effusive and pyroclastic emplacement mechanisms. We have extended this analysis to include additional localized DMDs from the catalog of 75 potential pyroclastic deposits. We have examined high resolution (up to 0.5 m/p) NAC images as they become available to assess the mode of emplacement of the deposits, locate potential volcanic vents, and assess physical characteristics of the DMDs such as thickness, roughness, and rock abundance. Within and around each DMD, the Clementine UVVIS multispectral mosaic (100 m/p, 5 bands at 415, 750, 900, 950, and 1000 nm) and LROC WAC multispectral image cubes (75 to 400 m/p, 7 bands at 320, 360, 415, 565, 605, 645, and 690 nm) have been used to extract spectral reflectance data. Spectral ratio plots were prepared to compare deposits and draw conclusions regarding compositional differences, such as mafic mineral or titanium content and distribution, both within and between DMDs. The result of the study will be an improved classification of these deposits in terms of emplacement mechanisms and composition, including identifying compositional affinities among DMDs and between DMDs and other volcanic deposits.

Developmental palaeobiology of trilobite eyes and its evolutionary significance

NASA Astrophysics Data System (ADS)

Thomas, A. T.

2005-06-01

Understanding of the calcified composite eyes of trilobites, the oldest preserved visual system, has advanced greatly in recent decades. Three types of trilobite eye occur, the more derived abathochroal and schizochroal types having evolved neotenically from holochroal eyes. Comparative morphology and phylogenetic considerations suggest that all three eye-types were underlain by common developmental systems. So far, understanding of these systems has been based entirely on morphological data from fossils, particularly the way the visual surface grew and the patterning of lens emplacement. Lenses characteristically form a hexagonal array comprising horizontal rows and, conspicuously in schizochroal eyes, dorso-ventral files. Because individual trilobites sometimes have eyes with different numbers of files, file number must reflect the operation of a developmental programme rather than being under immediate genetic control. An empirical developmental model has been devised to describe trilobite eye development, with separate rules dealing with the initiation of lens emplacement, growth and differentiation of the visual surface, and the termination of lens emplacement. Rarely, trilobites may have visual surfaces of normal size, but which lack lenses. This confirms that visual surface growth must have been regulated separately from lens emplacement, and is a feature that cannot be accounted for by the existing developmental model. Such a developmental separation is one of a number of similarities shared with Drosophila, the modern arthropod in which eye development is best understood. Many aspects of eye development are conserved in the Euarthropoda, and in bilaterian metazoans in general. A revised model for trilobite eye development is proposed using extant phylogenetic bracketing, interpreting morphological data from the fossils in the context of the hierarchy of developmental controls now becoming known from living animals. This new model suggests that overall eye shape and size did not require differential growth of the generative zone, as previously thought, and that no separate instruction was needed to specify the termination of lens emplacement. Instead, these features were regulated directly, by controlling the proliferation of cells making up the nascent visual surface. A process documented from Drosophila, which involves the selective inhibition of cells in front of a wave-like front of differentiation, and that is regulated by widely conserved genes, can be used to explain how the trilobite visual surface became differentiated. The model implies also that changes in hormonally regulated developmental pathways known from recent arthropods may have been responsible for the development of abathochroal and schizochroal eyes, and for heterochronic secondary eye reduction and blindness in trilobites.

Magma deformation and emplacement in rhyolitic dykes

NASA Astrophysics Data System (ADS)

McGowan, Ellen; Tuffen, Hugh; James, Mike; Wynn, Peter

2016-04-01

Silicic eruption mechanisms are determined by the rheological and degassing behaviour of highly-viscous magma ascending within shallow dykes and conduits. However, we have little knowledge of how magmatic behaviour shifts during eruptions as dykes and conduits evolve. To address this we have analysed the micro- to macro-scale textures in shallow, dissected rhyolitic dykes at the Tertiary Húsafell central volcano in west Iceland. Dyke intrusion at ~3 Ma was associated with the emplacement of subaerial rhyolitic pyroclastic deposits following caldera formation[1]. The dykes are dissected to ~500 m depth, 2-3 m wide, and crop out in two stream valleys with 5-30 m-long exposures. Dykes intrude diverse country rock types, including a welded ignimbrite, basaltic lavas, and glacial conglomerate. Each of the six studied dykes is broadly similar, exhibiting obsidian margins and microcrystalline cores. Dykes within pre-fractured lava are surrounded by external tuffisite vein networks, which are absent from dykes within conglomerate, whereas dykes failed to penetrate the ignimbrite. Obsidian at dyke margins comprises layers of discrete colour. These display dramatic thickness variations and collapsed bubble structures, and are locally separated by zones of welded, brecciated and flow-banded obsidian. We use textural associations to present a detailed model of dyke emplacement and evolution. Dykes initially propagated with the passage of fragmented, gas-charged magma and generation of external tuffisite veins, whose distribution was strongly influenced by pre-existing fractures in the country rock. External tuffisites retained permeability throughout dyke emplacement due to their high lithic content. The geochemically homogenous dykes then evolved via incremental magma emplacement, with shear deformation localised along emplacement boundary layers. Shear zones migrated between different boundary layers, and bubble deformation promoted magma mobility. Brittle-ductile microtextures and bubble populations point towards multi-step and multi-rate magma decompression, and we propose that gas overpressure in bubbles created tensile micro-cracks, whose coalescence culminated in macroscopic fragmentation. Finally, we infer that bubble collapse was associated with both localised brittle magma failure at shallow levels and macroscopic magma fragmentation deeper within the magmatic system. Processes recorded by the Húsafell dyke exposures appear akin to those occurring in the shallow conduits of Chaitén and Cordón Caulle during recent rhyolitic eruptions[2,3]. The field evidence presented here therefore bridges the gap between eruption observations and the deeper geological record, and so provides new insight into conduit evolution during explosive-hybrid-effusive eruptive phases[2,3] and the influence of country rock. The parallels between intrusive dyke textures and those found in extruded silicic lavas suggest that processes recorded in the dykes, including bubble collapse, volatile resorption, thermally-induced vesiculation and the formation of brittle-ductile shear zones, also occur within extrusive flows, contributing to their extreme textural heterogeneity[4]. [1] Saemundsson K & Noll H (1974) Jökull 24, 40-59. [2] Schipper CI et al. (2013) JVGR, 262, 25-37. [3] Castro JC et al. (2014) EPSL, 405, 52-61. [4] Shields JK et al. (2016) JVGR, 310, 137-158.

Syn- and post-eruptive volcanic processes in the Yubileinaya kimberlite pipe, Yakutia, Russia, and implications for the emplacement of South African-style kimberlite pipes

NASA Astrophysics Data System (ADS)

Kurszlaukis, S.; Mahotkin, I.; Rotman, A. Y.; Kolesnikov, G. V.; Makovchuk, I. V.

2009-11-01

The Yubileinaya kimberlite pipe, with a surface area of 59 ha, is one of the largest pipes in the Yakutian kimberlite province. The Devonian pipe was emplaced under structural control into Lower Paleozoic karstic limestone. The pipe complex consists of several smaller precursor pipes which are cut by the large, round Main pipe. While the precursor pipes show many features typical for root zones, Main pipe is younger, cuts into the precursor pipes and exposes well-bedded volcaniclastic sediments. The maximum estimated erosion since emplacement is 250 m. Open pit mapping of a 180 m thick kimberlite sequence documents the waning phases of the volcanic activity in the kimberlite pipe and the onset of its crater infill by resedimentation. Three volcanic lithofacies types can be differentiated. The deepest and oldest facies type is a massive volcaniclastic rock ("AKB") only accessible in drill core. It is equivalent to Tuffisitic Kimberlite in South African pipes and thought to be related to the main volcanic phase which was characterized by violent explosions. The overlying lithofacies type comprises primary and resedimented volcaniclastic sediments as well as rock avalanche deposits sourced from the exposed maar crater collar. It represents the onset of sedimentation onto the crater floor during the waning phase of volcanic eruptions, where primary pyroclastic deposition was contemporaneous with resedimentation from the tephra wall and the widening maar crater. Ongoing volcanic activity is also testified by the presence of a vertical feeder conduit marking the area of the last volcanic eruption clouds piercing through the diatreme. This feeder conduit is overlain by the third and youngest lithofacies type which consists mainly of resedimented volcaniclastic material and lake beds. During the sedimentation of this facies, primary volcanic activity was only minor and finally absent and resedimentation processes dominated the crater infill. The Yubileinaya pipe complex exposes root zones, contact breccias as well as diatreme and crater infill sediments. It has all features typical of large South African-style pipes and much can be learned from Yubileinaya about the emplacement sequence and behaviour of these pipes. Emplacement of the pipe occurred over an extended time span with intermittent phases of volcanic quiescence and consolidation. The AKB reveals little direct evidence of what sort of emplacement process was dominant during the main period of volcanic activity. There is neither textural evidence that violent degassing of a juvenile gas phase has caused pipe excavation, nor that external water was present during the main phase of volcanic eruptions. However, there is clear evidence in rock textures that meteoric surface water was present during crater infill. Base surge deposits forming part of the bedded crater infill sequence indicate that water was present in the eruption clouds and, hence, the root zone of the pipe. There is no reason to assume that groundwater did not also have access to the ascending magma during the main phase of volcanic activity that excavated the pipe and formed the AKB.

A Chill Sequence to the Bushveld Complex - Insight into the First Stages of Emplacement and the Parental Magmas to the World's Largest Layered Intrusion

NASA Astrophysics Data System (ADS)

Wilson, A.

2012-04-01

Evidence of the initial stages of magma emplacement in large mafic chambers is commonly lacking because of resorption of early-formed chills and complicated by the fact that the first magmas that entered the chamber were usually more evolved than the true parental magma. Deep drilling has revealed a rare occurrence of a chill sequence from the eastern Bushveld Complex at the base of a previously unrecognized thick succession of ultramafic rocks that forms part of the Lower Zone. The chill sequence (1.8 m thick) includes a true chill against quartzite floor rock, crystalline quench textured and orthopyroxene spinifex textured rocks. Importantly the chill composition represents a relatively evolved magma formed by the separation of high-Mg olivines prior to its emplacement, probably in a conduit or a pre-chamber. An overlying pyroxene dunite represents the extract that gave rise to the chill and was emplaced either as a crystal slurry derived from the feeder conduit or as the crystallization product from a slightly later influx of primitive magma of komatiitic composition. This highly-Mg rich pyroxene dunite most likely acted as a barrier to the thermal erosion of the chill sequence as the chamber filled. The olivine in the pyroxene dunite layer is the most primitive yet recorded for the Bushveld Complex at Mg# 0.915, and the cores of associated orthopyroxene are Mg# 0.93. Compositions of the orthopyroxene in the quench and spinifex textured units range from Mg# 0.91 to 0.72 and preserve cores close to the original liquidus as well as tracking the complete in-situ solidification process. Olivine contains abundant dendritic exsolution structures of Cr-spinel and Al-rich clinopyroxene indicating that they formed at high temperature from incorporation of Ca, Al and Cr into olivine, with little time to equilibrate before emplacement. Chromite in the section is the most primitive yet recorded for the Bushveld Complex. The komatiite magma that was initially emplaced into the Bushveld chamber contained 19-20% MgO but trace element analysis indicates that it was derived from melting of a more primitive komatiite source which digested about 40% of typical Kaapvaal basement to give the strong crustal signature represented by trace elements and Sr isotopes. The evolved B1 magma, which compositionally is only broadly constrained, is regarded as the parental magma to the Lower and Critical Zones, but this is shown to represent a number of different magmas also derived from a komatiitic source with relatively high degrees of crustal contamination. The komatiite source to the Bushveld magmas could have been derived from subducted Archean ocean crust such as the silica- rich but highly depleted Commondale-type komatiites, as well as Barberton-type komatiites and komatiitic basalts. A mantle peridotite source is not considered a suitable bulk source because the Ni content in the Bushveld olivines (up to 4000 ppm) is indicative of a pyroxenite source in the mantle.

Geomagnetic Investigation of Sandstone Dikes of the Colorado Front Range, for Determination of Age and Mode of Emplacement

NASA Astrophysics Data System (ADS)

Freedman, D.; Petronis, M. S.; Siddoway, C. S.

2012-12-01

In the Colorado Front Range, an array of sandstone dikes has intrigued geologists for over a century (Cross 1894,GSAB, 5, 525). Within their crystalline host, the dikes reach widths >7m and have a lateral extent of 70km along the Ute Pass Fault (UPF). The essential questions of sediment source, emplacement mode, and age of the dikes are unanswered. We present new paleomagnetic, rock magnetic, and anisotropy of magnetic susceptibility (AMS) results used to determine the age and emplacement behavior of the dikes. The eleven dikes selected for magnetic studies have sharp, planar margins, and share the systematic geometry of the NW striking subvertical dike array. They exhibit little or no overprint by brittle fracturing/shear associated with the UPF. Our approach involved the use of paleomagnetic techniques to isolate the characteristic remanent magnetization (ChRM), which we used to limit the age of the dikes' magnetization. Anisotropy of magnetic susceptibility (AMS),arising from alignment of detrital magnetite, serves as a proxy for the orientation of flow during dike emplacement. U-Pb detrital zircon ages, obtained previously, did not provide a useful constraint on emplacement age because the dominant age matches that of the prevalent host,1.03Ga Pikes Peak Granite. IRM acquisition experiments were performed to identify the principal magnetic phases as a mixture of Fe-Ti oxide phases, likely to be low-Ti magnetite and hematite. The sandstone consists of sub-rounded to rounded sand-sized quartz, angular feldspar (<5%), and detrital magnetite; selected samples have uniform grain size and uniform color arising from hematite cement. Although direct cover relationships are not preserved, a portion of the study sites are proximal to in situ near-horizontal sedimentary cover rocks that offer evidence against large tectonic rotation. Cores were collected using a gas-powered drill with a diamond bit and oriented using a sun compass. Where possible, cores were obtained on paired margins to test for directionality of flow using AMS. Paleomagnetic results reveal a magnetization carried by both magnetite and hematite. Laboratory unblocking temperatures for most samples are >600°C. Some samples carry a characteristic remanent magnetization (ChRM) of NW declination with shallow positive inclination, while others yield a characteristic remanent magnetization of SE declination with shallow inclination. By correlation with paleomagnetic results from the region, our findings indicate an age Permian or older. The NW directed ChRM may signify a magnetization of Neoproterozoic age, while the SE directed ChRM is more consistent with a Permo-Carboniferous magnetization. Our investigation of these possibilities is ongoing. Analysis of AMS for nine dike sites yielded subhorizontal strongly prolate magnetic ellipsoids. The magnetic lineation (K1) has moderate plunge and trends NW, parallel to the dike margins. Average bulk susceptibilities (Km) are low (6.39E-5 SI). The AMS characteristics, together with primary sedimentary structures point to instantaneous lateral injection due to elevated pore fluid pressures arising from high lithostatic or tectonic loads. We hypothesize that sediment production and fluid overpressure led to emplacement in a glacial or seismically active setting.

Response of zircon to melting and metamorphism in deep arc crust, Fiordland (New Zealand): implications for zircon inheritance in cordilleran granites

NASA Astrophysics Data System (ADS)

Bhattacharya, Shrema; Kemp, A. I. S.; Collins, W. J.

2018-04-01

The Cretaceous Mount Daniel Complex (MDC) in northern Fiordland, New Zealand was emplaced as a 50 m-thick dyke and sheet complex into an active shear zone at the base of a Cordilleran magmatic arc. It was emplaced below the 20-25 km-thick, 125.3 ± 1.3 Ma old Western Fiordland Orthogneiss (WFO) and is characterized by metre-scale sheets of sodic, low and high Sr/Y diorites and granites. 119.3 ± 1.2 Ma old, pre-MDC lattice dykes and 117.4 ± 3.1 Ma late-MDC lattice dykes constrain the age of the MDC itself. Most dykes were isoclinally folded as they intruded, but crystallised within this deep-crustal, magma-transfer zone as the terrain cooled and was buried from 25 to 50 km (9-14 kbar), based on published P-T estimated from the surrounding country rocks. Zircon grains formed under these magmatic/granulite facies metamorphic conditions were initially characterized by conservatively assigning zircons with oscillatory zoning as igneous and featureless rims as metamorphic, representing 54% of the analysed grains. Further petrological assignment involved additional parameters such as age, morphology, Th/U ratios, REE patterns and Ti-in-zircon temperature estimates. Using this integrative approach, assignment of analysed grains to metamorphic or igneous groupings improved to 98%. A striking feature of the MDC is that only 2% of all igneous zircon grains reflect emplacement, so that the zircon cargo was almost entirely inherited, even in dioritic magmas. Metamorphic zircons of MDC show a cooler temperature range of 740-640 °C, reflects the moderate ambient temperature of the lower crust during MDC emplacement. The MDC also provides a cautionary tale: in the absence of robust field and microstructural relations, the igneous-zoned zircon population at 122.1 ± 1.3 Ma, derived mostly from inherited zircons of the WFO, would be meaningless in terms of actual magmatic emplacement age of MDC, where the latter is further obscured by younger (ca. 114 Ma) metamorphic overgrowths. Thus, our integrative approach provides the opportunity to discriminate between igneous and metamorphic zircon within deep-crustal complexes. Also, without the tight field relations at Mt Daniel, the scatter beyond a statistically coherent group might be ascribed to the presence of "antecrysts", but it is clear that the WFO solidified before the MDC was emplaced, and these older "igneous" grains are inherited. The bimodal age range of inherited igneous grains, dominated by 125 Ma and 350-320 Ma age clusters, indicate that the adjacent WFO and a Carboniferous metaigneous basement were the main sources of the MDC magmas. Mafic lenses, stretched and highly attenuated into wisps within the MDC and dominated by 124 Ma inherited zircons, are considered to be entrained restitic material from the WFO. A comparison with lower- and upper-crustal, high Sr/Y metaluminous granites elsewhere in Fiordland shows that zircon inheritance is common in the deep crust, near the source region, but generally much less so in coeval, shallow magma chambers (plutons). This is consistent with previous modelling on rapid zircon dissolution rates and high Zr saturation concentrations in metaluminous magmas. Accordingly, unless unusual circumstances exist, such as MDC preservation in the deep crust, low temperatures of magma generation, or rapid emplacement and crystallization at higher structural levels, information on zircon inheritance in upper crustal, Cordilleran plutons is lost during zircon dissolution, along with information on the age, nature and variety of the source material. The observation that dioritic magmas can form at these low temperatures (< 750 °C) also suggests that the petrogenesis of mafic rocks in the arc root might need to be re-assessed.

Structural Analysis of Silicic Lavas Reveals the Importance of Endogenous Flow During Emplacement

NASA Astrophysics Data System (ADS)

Andrews, G. D.; Martens, A.; Isom, S.; Maxwell, A.; Brown, S. R.

2017-12-01

Recent observations of silicic lava flows in Chile strongly suggest sustained, endogeneous flow beneath an insulating carapace, where the flow advances through breakouts at the flow margin. New mapping of vertical exposures around the margin of Obsidian Dome, California, has identified discreet lobe structures in cross-section, suggesting that flow-front breakouts occured there during emplacement. The flow lobes are identified through structural measurements of flow-banding orientation and the stretching directions of vesicles. Newly acquired lidar of the Inyo Domes, including Obsidian Dome, is being analyzed to better understand the patterns of folding on the upper surface of the lavas, and to test for fold vergence patterns that may distinguish between endogenous and exogenous flow.

Additive Construction with Mobile Emplacement (ACME)

NASA Technical Reports Server (NTRS)

Vickers, John

2015-01-01

The Additive Construction with Mobile Emplacement (ACME) project is developing technology to build structures on planetary surfaces using in-situ resources. The project focuses on the construction of both 2D (landing pads, roads, and structure foundations) and 3D (habitats, garages, radiation shelters, and other structures) infrastructure needs for planetary surface missions. The ACME project seeks to raise the Technology Readiness Level (TRL) of two components needed for planetary surface habitation and exploration: 3D additive construction (e.g., contour crafting), and excavation and handling technologies (to effectively and continuously produce in-situ feedstock). Additionally, the ACME project supports the research and development of new materials for planetary surface construction, with the goal of reducing the amount of material to be launched from Earth.

Late Triassic (Carnian) lamproites from Noril'sk, polar Siberia: Evidence for melting of the recycled Archean crust and the question of lamproite source for some placer diamond deposits of the Siberian Craton

NASA Astrophysics Data System (ADS)

Ivanov, Alexei V.; Demonterova, Elena I.; Savatenkov, Valery M.; Perepelov, Alexander B.; Ryabov, Viktor V.; Shevko, Artem Y.

2018-01-01

Two typical lamproitic dykes were found in Noril'sk region of the north-western Siberian Craton, which according to mineralogical, geochemical and isotopic criteria belong to anorogenic, non-diamondiferous type of lamproites. According to the geologic relationships, they cut through the Noril'sk-1 intrusion of the Siberian flood basalt province and thus are younger than 251 Ma. 40Ar/39Ar dating of the two dykes yielded ages of 235.24 ± 0.19 Ma and 233.96 ± 0.19 Ma, showing that they were emplaced in Carnian of the Late Triassic, about 16 Ma after the flood basalt event. There are some indications that there were multiple lamproitic dyke emplacements, including probably emplacement of diamondiferous lamproites, which produced Carnian-age diamond-rich placer deposits in other parts of the Siberian Craton and in adjacent regions. Lead isotope modelling shows that the source of the studied lamproites was formed with participation of recycled crust, which underwent modification of its U/Pb ratio as early as 2.5 Ga. However, the exact mechanism of the recycling cannot be deciphered now. It could be either through delamination of the cratonic crust or subduction of a mix of ancient terrigenous sediments into the mantle transition zone.

Magnetic Signature of the Lunar South Pole-Aitken Basin: Character, Origin, and Age

NASA Technical Reports Server (NTRS)

Purucker, Michael E.; Head, James W., III; Wilson, Lionel

2012-01-01

A new magnetic map of the Moon, based on Lunar Prospector (LP) magnetometer observations, sheds light on the origin of the South Pole-Aitken Basin (SPA), the largest and oldest of the recognized lunar basins. A set of WNW-trending linear to arcuate magnetic features, evident in both the radial and scalar observations, covers much of a 1000 km wide region centered on the NW portion of SPA. The source bodies are not at the surface because the magnetic features show no first-order correspondence to any surface topographic or structural feature. Patchy mare basalts of possible late Imbrianage are emplaced within SPA and are inferred to have been emplaced through dikes, directly from mantle sources. We infer that the magnetic features represent dike swarms that served as feeders for these mare basalts, as evident from the location of the Thomson/ Mare Ingenii, Van de Graaff, and Leeuwenhoek mare basalts on the two largest magnetic features in the region. Modeling suggests that the dike zone is between 25 and 50 km wide at the surface, and dike magnetization contrasts are in the range of 0.2 A/m. We theorize that the basaltic dikes were emplaced in the lunar crust when a long-lived dynamo was active. Based on pressure, temperature, and stress conditions prevalent in the lunar crust, dikes are expected to be a dominantly subsurface phenomenon, consistent with the observations reported here.

Low-latitude arc–continent collision as a driver for global cooling

PubMed Central

Jagoutz, Oliver; Macdonald, Francis A.; Royden, Leigh

2016-01-01

New constraints on the tectonic evolution of the Neo-Tethys Ocean indicate that at ∼90–70 Ma and at ∼50–40 Ma, vast quantities of mafic and ultramafic rocks were emplaced at low latitude onto continental crust within the tropical humid belt. These emplacement events correspond temporally with, and are potential agents for, the global climatic cooling events that terminated the Cretaceous Thermal Maximum and the Early Eocene Climatic Optimum. We model the temporal effects of CO2 drawdown from the atmosphere due to chemical weathering of these obducted ophiolites, and of CO2 addition to the atmosphere from arc volcanism in the Neo-Tethys, between 100 and 40 Ma. Modeled variations in net CO2-drawdown rates are in excellent agreement with contemporaneous variation of ocean bottom water temperatures over this time interval, indicating that ophiolite emplacement may have played a major role in changing global climate. We demonstrate that both the lithology of the obducted rocks (mafic/ultramafic) and a tropical humid climate with high precipitation rate are needed to produce significant consumption of CO2. Based on these results, we suggest that the low-latitude closure of ocean basins along east–west trending plate boundaries may also have initiated other long-term global cooling events, such as Middle to Late Ordovician cooling and glaciation associated with the closure of the Iapetus Ocean. PMID:27091966

Using paleomagnetism to uncover long-runout pyroclastic flows

NASA Astrophysics Data System (ADS)

Lerner, G. A.; Cronin, S. J.; Turner, G. M.

2017-12-01

Understanding the conditions under which volcanic deposits were emplaced is vital to better preparing for hazards at an active stratovolcano. The coherence of paleomagnetic directions in different parts of the blocking temperature spectrum between the clasts of mass flow deposits has proven to be a useful tool for ascertaining emplacement temperatures. These temperature estimates can help in distinguishing between hot pyroclastic density currents (PDCs) and cold lahars. In the case of more clast-poor distal deposits, however, it can be difficult to obtain sufficient clast material for effective paleomagnetic study. In this study, the problem was remedied by using oriented and strengthened samples of matrix material from mass flow deposits in the 11,500 BP Warea Formation from Mt. Taranaki, New Zealand. Paleomagnetic data from matrix samples was used to supplement the limited data obtained from the traditional clast analysis in order to determine the emplacement temperature of the deposits. Comparison of paleomagnetic directions obtained from matrix samples at several sites within the Warea Formation revealed it as a PDC with matrix temperatures over 200°C and clasts reaching temperatures of up to 410°C at the time of deposition. This discovery of hot PDC deposits at distances >20 km from the summit of the volcano extends their known range at this volcano by 5 km. These findings will significantly change the hazard mapping and emergency planning for this region.

Regional and contact metamorphism within the Moy Intrusive Complex, Grampian Highlands, Scotland

NASA Astrophysics Data System (ADS)

Zaleski, E.

1985-04-01

In central Scotland, the Moy Intrusive Complex consists of (1) the Main Phase — syntectonic peraluminous granodiorite to granite emplaced at c. 455 Ma, intruded by (2) the Finglack Alaskite — post-tectonic leucocratic granite emplaced at 407+/-5 Ma. The Main Phase was emplaced into country rocks at amphibolite facies temperatures. Rb-Sr dates and a compositional spectrum of decreasing celadonite content in Main Phase muscovite suggest the persistence of c. 550° C temperatures for c. 30 Ma but with a declining pressure regime, i.e. isothermal uplift. The Finglack Alaskite was intruded at high structural level, leading to the development of a contact metamorphic aureole in the Main Phase. The thermal effects of contact metamorphism include intergrowths of andalusite, biotite and feldspar in pseudomorphs after muscovite. This is associated with recrystallized granoblastic quartz. Muscovite breakdown and reaction with adjacent biotite, quartz and feldspar, i.e. a function of local mineral assemblage rather than bulk rock composition, is postulated to explain the occurrence of metamorphic andalusite in a granitoid rock. The Main Phase pluton of the Moy Intrusive Complex lies within a NNE trending belt of c. 450 Ma Caledonian tectonic and magmatic activity paralleling the Moine Thrust, and extending from northern Scotland to the Highland Boundary Fault. Syntectonic ‘S-type’ magmatism with upper crustal source areas implies crustal thickening and suggests an intracratonic orogeny.

Evidence for multiple metamorphic events in the Adirondack Mountains, N. Y

DOE Office of Scientific and Technical Information (OSTI.GOV)

McLelland, J.; Lochhead, A.; Vyhnal, C.

1988-05-01

Field evidence consisting of: (1) rotated, foliated xenoliths, (2) country rock foliation truncated by isoclinally folded igneous intrusions bearing granulite facies assemblages document one, or more, early dynamothermal event(s) of regional scale and high grade. Early metamorphism resulted in pronounced linear and planar fabric throughout the Adirondacks and preceded the emplacement of the anorthosite-mangerite-charnockite-granite-alaskite (AMCA) suite which contains xenoliths of the metamorphosed rocks. Olivine metagabbros, believed to be approximately contemporaneous with the AMCA-suite, also crosscut and contain xenoliths of, strongly foliated metasediments. These intrusive rocks caused contact metamorphism in the metasediments which locally exhibit both anatectite and restite assemblages. Subsequently,more » this already complex framework underwent three phases of folding, including an early recumbent isoclinical event, and was metamorphosed to granulite facies P,T conditions. The age of the early metamorphism cannot yet be narrowly constrained, but isotopic results suggest that it may be as young as approx. 1200 Ma or older than approx. 1420 Ma. U-Pb zircon ages indicate emplacement of the AMCA-(metagabbro)-suite in the interval 1160-1130 Ma and place the peak of granulite facies metamorphism between 1070-1025 Ma. The anorogenic character of the AMCA-suite, and the occurrence of metadiabase dike swarms within it, are further evidence of the separate nature of the metamorphic events that precede and postdate AMCA emplacement.« less

Deformation of the Wineglass Welded Tuff and the timing of caldera collapse at Crater Lake, Oregon

USGS Publications Warehouse

Kamata, H.; Suzuki-Kamata, K.; Bacon, C.R.

1993-01-01

Four types of deformation occur in the Wineglass Welded Tuff on the northeast caldera rim of Crater Lake: (a) vertical tension fractures; (b) ooze-outs of fiamme: (c) squeeze-outs of fiamme; and (d) horizontal pull-apart structures. The three types of plastic deformation (b-d) developed in the lower part of the Wineglass Welded Tuff where degree of welding and density are maximum. Deformation originated from concentric normal faulting and landsliding as the caldera collapsed. The degree of deformation of the Wineglass Welded Tuff increases toward the northeast part of the caldera, where plastic deformation occurred more easily because of a higher emplacement temperature probably due to proximity to the vent. The probable glass transition temperature of the Wineglass Welded Tuff suggests that its emplacement temperature was ???750??C where the tuff is densely welded. Calculation of the conductive cooling history of the Wineglass Welded Tuff and the preclimactic Cleetwood (lava) flow under assumptions of a initially isothermal sheet and uniform properties suggests that (a) caldera collapse occurred a maximum of 9 days after emplacement of the Wineglass Welded Tuff, and that (b) the period between effusion of the Cleetwood (lava) flow and onset of the climactic eruption was <100 years. If cooling is controlled more by precipitation during quiescent periods than by conduction, these intervals must be shorter than the calculated times. ?? 1993.

Post-mining deterioration of bauxite overburdens in Jamaica: storage methods or subsoil dilution?

NASA Astrophysics Data System (ADS)

Harris, Mark A.; Omoregie, Samson N.

2008-03-01

Rapid degradation of disturbed soil from a karst bauxite mine in Jamaica was recorded. Substantial macronutrient losses were incurred during a short (1 month) or a long (12 months) storage of the replaced topsoils during frequent wet/dry changes. The results suggested very high rates (>70% in the first year) of soil degradation from storage, alongside moderate rates (30%) within the same storage dump. However, higher levels of soil organic matter (SOM) were indicated just below the surface, compared with the surface horizons. It was unlikely that under a high leaching humid tropical rainfall regime, natural degradation processes could have re-emplaced such material firmly intact in the 15-30 cm zone. It was therefore concluded that these SOM anomalies were due to mechanical dilution of surface soil with subsoil material during overburden removal and emplacement rather than from long storage. Increasing the soil organic content during storage could be one corrective approach. However, it is far less costly to exercise greater care to apply more precise overburden removal and emplacement techniques initially, than it is to correct the results of topsoil contamination with subsoil. Although this study was limited to one mine, in the context of imminent large-scale mining expansion and current practices, further investigations are needed to accurately ascertain the proportion of similar subsoil contamination in other bauxite-mined sites.

The ultimate fate of a synmagmatic shear zone. Interplay between rupturing and ductile flow in a cooling granite pluton

NASA Astrophysics Data System (ADS)

Zibra, I.; White, J. C.; Menegon, L.; Dering, G.; Gessner, K.

2018-05-01

The Neoarchean Cundimurra Pluton (Yilgarn Craton, Western Australia) was emplaced incrementally along the transpressional Cundimurra Shear Zone. During syndeformational cooling, discrete networks of cataclasites and ultramylonites developed in the narrowest segment of the shear zone, showing the same kinematics as the earlier synmagmatic structures. Lithological boundaries between aplite/pegmatite veins and host granitic gneiss show more intense pre-cataclasite fabrics than homogeneous material, and these boundaries later became the preferred sites of shear rupture and cataclasite nucleation. Transient ductile instabilities established along lithological boundaries culminated in shear rupture at relatively high temperature (∼500-600 °C). Here, tensile fractures at high angles from the fault plane formed asymmetrically on one side of the fault, indicating development during seismic rupture, establishing the oldest documented earthquake on Earth. Tourmaline veins were emplaced during brittle shearing, but fluid pressure probably played a minor role in brittle failure, as cataclasites are in places tourmaline-free. Subsequent ductile deformation localized in the rheologically weak tourmaline-rich aggregates, forming ultramylonites that deformed by grain-size sensitive creep. The shape and width of the pluton/shear zone and the regime of strain partitioning, induced by melt-present deformation and established during pluton emplacement, played a key role in controlling the local distribution of brittle and then ductile subsolidus structures.

Low-latitude arc-continent collision as a driver for global cooling.

PubMed

Jagoutz, Oliver; Macdonald, Francis A; Royden, Leigh

2016-05-03

New constraints on the tectonic evolution of the Neo-Tethys Ocean indicate that at ∼90-70 Ma and at ∼50-40 Ma, vast quantities of mafic and ultramafic rocks were emplaced at low latitude onto continental crust within the tropical humid belt. These emplacement events correspond temporally with, and are potential agents for, the global climatic cooling events that terminated the Cretaceous Thermal Maximum and the Early Eocene Climatic Optimum. We model the temporal effects of CO2 drawdown from the atmosphere due to chemical weathering of these obducted ophiolites, and of CO2 addition to the atmosphere from arc volcanism in the Neo-Tethys, between 100 and 40 Ma. Modeled variations in net CO2-drawdown rates are in excellent agreement with contemporaneous variation of ocean bottom water temperatures over this time interval, indicating that ophiolite emplacement may have played a major role in changing global climate. We demonstrate that both the lithology of the obducted rocks (mafic/ultramafic) and a tropical humid climate with high precipitation rate are needed to produce significant consumption of CO2 Based on these results, we suggest that the low-latitude closure of ocean basins along east-west trending plate boundaries may also have initiated other long-term global cooling events, such as Middle to Late Ordovician cooling and glaciation associated with the closure of the Iapetus Ocean.

The Ottaviano eruption of Somma-Vesuvio (8000 y B.P.): a magmatic alternating fall and flow-forming eruption

NASA Astrophysics Data System (ADS)

Rolandi, G.; Maraffi, S.; Petrosino, P.; Lirer, L.

1993-11-01

The Ottaviano eruption occurred in the late neolithic (8000 y B.P.). 2.40 km 3 of phonolitic pyroclastic material (0.61 km 3 DRE) were emplaced as pyroclastic flow, surge and fall deposits. The eruption began with a fall phase, with a model column height of 14 km, producing a pumice fall deposit (LA). This phase ended with short-lived weak explosive activity, giving rise to a fine-grained deposit (L1), passing to pumice fall deposits as the result of an increasing column height and mass discharge rate. The subsequent two fall phases (producing LB and LC deposits), had model column heights of 20 and 22 km with eruption rates of 2.5 × 10 7 and 2.81 × 10 7 kg/s, respectively. These phases ended with the deposition of ash layers (L2 and L3), related to a decreasing, pulsing explosive activity. The values of dynamic parameters calculated for the eruption classify it as a sub-plinian event. Each fall phase was characterized by variations in the eruptive intensity, and several pyroclastic flows were emplaced (F1 to F3). Alternating pumice and ash fall beds record the waning of the eruption. Finally, owing to the collapse of a eruptive column of low gas content, the last pyroclastic flow (F4) was emplaced.

Insights Into Magma Ascent During Shallow-Level Crustal Shortening From Magnetic Fabrics of the Philipsburg Batholith, SW Montana

NASA Astrophysics Data System (ADS)

Naibert, T. J.; Geissman, J. W.

2007-12-01

Latest Cretaceous development of the Sevier fold and thrust belt in SW Montana overlapped spatially with silicic magmatism. In the fold thrust belt, large volumes of magma were emplaced well east of the main magmatic arc, now exposed as the Idaho Batholith. Hypothesized mechanisms for emplacement of magma within the overthrust belt often involve magma ascent along shallow, west-dipping faults. The ~ 74 Ma (K-Ar method) Philipsburg Batholith is a 122 km2 tabular granodiorite emplaced into deformed Precambrian Belt Supergroup through Cretaceous strata. The Philipsburg Batholith lies in the upper plate of the Georgetown- Princeton Thrust, NW of Anaconda, Montana and cross-cuts two other previously mapped faults. Anisotropy of magnetic susceptibility (AMS) measurements of 122 sites from the Philipsburg Batholith define magnetic foliations and/or lineations to test magma ascent along the Georgetown-Princeton Thrust. AMS fabrics in the Philipsburg Batholith, dominantly defined by magnetite, are generally oblate or triaxial and are typically very consistent at the site level. Preliminary fabric data show subhorizontal foliations across most of the batholith, with steeply dipping foliations near the margins and a minor increase in foliation dip near the inferred fault trace. The hypothesis of magma ascent along fault surfaces will be supported if further data confirm the concentration of relatively steep foliation orientations across the trace of the Georgetown-Princeton thrust.

Contrasting magmatic structures between small plutons and batholiths emplaced at shallow crustal level (Sierras de Córdoba, Argentina)

NASA Astrophysics Data System (ADS)

Pinotti, Lucio P.; D'Eramo, Fernando J.; Weinberg, Roberto F.; Demartis, Manuel; Tubía, José María; Coniglio, Jorge E.; Radice, Stefania; Maffini, M. Natalia; Aragón, Eugenio

2016-11-01

Processes like injection, magma flow and differentiation and influence of the regional strain field are here described and contrasted to shed light on their role in the formation of small plutons and large batholiths their magmatic structures. The final geometric and compositional arrangement of magma bodies are a complex record of their construction and internal flow history. Magma injection, flow and differentiation, as well as regional stresses, all control the internal nature of magma bodies. Large magma bodies emplaced at shallow crustal levels result from the intrusion of multiple magma batches that interact in a variety of ways, depending on internal and external dynamics, and where the early magmatic, growth-related structures are commonly overprinted by subsequent history. In contrast, small plutons emplaced in the brittle-ductile transition more likely preserve growth-related structures, having a relatively simple cooling history and limited internal magma flow. Outcrop-scale magmatic structures in both cases record a rich set of complementary information that can help elucidate their evolution. Large and small granitic bodies of the Sierra Pampeanas preserve excellent exposures of magmatic structures that formed as magmas stepped through different rheological states during pluton growth and solidification. These structures reveal not only the flow pattern inside magma chambers, but also the rheological evolution of magmas in response to temperature evolution.

Cretaceous plutonic rocks in the Donner Lake-Cisco Grove area, northern Sierra Nevada, California

USGS Publications Warehouse

Kulow, Matthew J.; Hanson, Richard E.; Girty, Gary H.; Girty, Melissa S.; Harwood, David S.

1998-01-01

The northernmost occurrences of extensive, glaciated exposures of the Sierra Nevada batholith occur in the Donner Lake-Cisco Grove area of the northern Sierra Nevada. The plutonic rocks in this area, which are termed here the Castle Valley plutonic assemblage, crop out over an area of 225 km2 and for the most part are shown as a single undifferentiated mass on previously published geological maps. In the present work, the plutonic assemblage is divided into eight separate intrusive units or lithodemes, two of which each consist of two separate plutons. Compositions are dominantly granodiorite and tonalite, but diorite and granite form small plutons in places. Spectacular examples of comb layering and orbicular texture occur in the diorites. U-Pb zircon ages have been obtained for all but one of the main units and range from ~120 to 114 Ma, indicating that the entire assemblage was emplaced in a narrow time frame in the Early Cretaceous. This is consistent with abundant field evidence that many of the individual phases were intruded penecontemporaneously. The timing of emplacement correlates with onset of major Cretaceous plutonism in the main part of the Sierra Nevada batholith farther south. The emplacement ages also are similar to isotopic ages for gold-quartz mineralization in the Sierran foothills west of the study area, suggesting a direct genetic relationship between the voluminous Early Cretaceous plutonism and hydrothermal gold mineralization.

Accommodation folding and magmatic intrusions in the Vøring Basin, Norwegian Sea

NASA Astrophysics Data System (ADS)

Omosanya, K. O.; Johansen, S. E.; Eruteya, O. E.; Waldmann, N.

2016-12-01

The geometry and growth of volcanic-related accommodation folds remain an interesting topic for both the academia and petroleum industry as these can serve as hydrocarbon traps, which directly result from the forceful emplacement of volcanic sills in the shallow subsurface. In this study, we employed a high-resolution 3D seismic reflection data to characterize the geometry and the development of a regional forced fold in the Vøring Basin, Norwegian Sea. The volcanic sills were interpreted based on the principles of volcanostratigraphy and are recognized as positive high-amplitude anomalies with similar polarity as the seabed reflection. The interpreted fold covers ca. 78 km2 with amplitude of ca. 770 m and it is underlain by an extensive complex of interconnected sills. The volcanic sills are emplaced at depths of 4000 to 5000 ms, where they include saucer-shaped, sub-vertical to transgressive sills. The accommodation fold is interfered by E-W extensional faults and several fractures related to hydrothermal vents in the southern and western parts. The overlying overburden is in turn deformed and structurally compartmentalized through regional buckling. In this work, we demonstrate that accommodation folding is formed in response to the emplacement of several interconnected sills during the opening of the Northern Atlantic Ocean. The interpreted accommodation fold characterized here represents one of the largest documented known structures so far and has important implications for hydrocarbon exploration.

Simulation of ventilation efficiency, and pre-closure temperatures in emplacement drifts at Yucca Mountain, Nevada, using Monte Carlo and composite thermal-pulse methods

USGS Publications Warehouse

Case, J.B.; Buesch, D.C.

2004-01-01

Predictions of waste canister and repository driftwall temperatures as functions of space and time are important to evaluate pre-closure performance of the proposed repository for spent nuclear fuel and high-level radioactive waste at Yucca Mountain, Nevada. Variations in the lithostratigraphic features in densely welded and crystallized rocks of the 12.8-million-year-old Topopah Spring Tuff, especially the porosity resulting from lithophysal cavities, affect thermal properties. A simulated emplacement drift is based on projecting lithophysal cavity porosity values 50 to 800 m from the Enhanced Characterization of the Repository Block cross drift. Lithophysal cavity porosity varies from 0.00 to 0.05 cm3/cm3 in the middle nonlithophysal zone and from 0.03 to 0.28 cm3/cm3 in the lower lithophysal zone. A ventilation model and computer program titled "Monte Carlo Simulation of Ventilation" (MCSIMVENT), which is based on a composite thermal-pulse calculation, simulates statistical variability and uncertainty of rock-mass thermal properties and ventilation performance along a simulated emplacement drift for a pre-closure period of 50 years. Although ventilation efficiency is relatively insensitive to thermal properties, variations in lithophysal porosity along the drift can result in a range of peak driftwall temperatures can range from 40 to 85??C for the preclosure period. Copyright ?? 2004 by ASME.

Thermal Modeling of Permafrost Melt by Overlying Lava Flows with Applications to Flow-associated Outflow Channel Volumes in the Cerberus Plains, Mars

NASA Technical Reports Server (NTRS)

Chase, Z. A. J.; Sakimoto, S. E. H.

2003-01-01

The Cerberus region of Mars has numerous geologically recent fluvial and volcanic features superimposed spatially, with some of them using the same flow channels and apparent vent structures. Lava-water interaction landforms such as psuedocraters suggest some interaction of emplacing lava flows with underlying ground ice or water. This study investigates a related interaction type a region where the emplaced lava might have melted underlying ice in the regolith, as there are small outflow channel networks emerging from the flank flows of a lava shield over a portion of the Eastern Cerberus Rupes. Specifically, we use high-resolution Mars Orbiter Laser Altimeter (MOLA) topography to constrain channel and flow dimensions, and thus estimate the thermal pulse from the emplaced lava into the substrate and the resulting melting durations and refreezing intervals. These preliminary thermal models indicate that the observed flows could easily create thermal pulse(s) sufficient to melt enough ground ice to fill the observed fluvial small outflow channels. Depending on flow eruption timing and hydraulic recharge times, this system could easily have produced multiple thermal pulses and fluvial releases. This specific case suggests that regional small water releases from similar cases may be more common than suspected, and that there is a possibility for future fluvial releases if ground ices are currently present and future volcanic eruptions in this young region are possible.

Paving the seafloor: Volcanic emplacement processes during the 2005-2006 eruptions at the fast spreading East Pacific Rise, 9°50‧N

NASA Astrophysics Data System (ADS)

Fundis, A. T.; Soule, S. A.; Fornari, D. J.; Perfit, M. R.

2010-08-01

The 2005-2006 eruptions near 9°50'N at the East Pacific Rise (EPR) marked the first observed repeat eruption at a mid-ocean ridge and provided a unique opportunity to deduce the emplacement dynamics of submarine lava flows. Since these new flows were documented in April 2006, a total of 40 deep-towed imaging surveys have been conducted with the Woods Hole Oceanographic Institution's (WHOI) TowCam system. More than 60,000 digital color images and high-resolution bathymetric profiles of the 2005-2006 flows from the TowCam surveys were analyzed for lava flow morphology and for the presence of kipukas, collapse features, faults and fissures. We use these data to quantify the spatial distributions of lava flow surface morphologies and to investigate how they relate to the physical characteristics of the ridge crest, such as seafloor slope, and inferred dynamics of flow emplacement. We conclude that lava effusion rate was the dominant factor controlling the observed morphological variations in the 2005-2006 flows. We also show that effusion rates were higher than in previously studied eruptions at this site and varied systematically along the length of the eruptive fissure. This is the first well-documented study in which variations in seafloor lava morphology can be directly related to a well documented ridge-crest eruption where effusion rate varied significantly.

Magnetotelluric Investigations of the Yellowstone Caldera: Understanding the Emplacement of Crustal Magma Bodies

NASA Astrophysics Data System (ADS)

Gurrola, R. M.; Neal, B. A.; Bennington, N. L.; Cronin, R.; Fry, B.; Hart, L.; Imamura, N.; Kelbert, A.; Bowles-martinez, E.; Miller, D. J.; Scholz, K. J.; Schultz, A.

2017-12-01

Wideband magnetotellurics (MT) presents an ideal method for imaging conductive shallow magma bodies associated with contemporary Yellowstone-Snake River Plain (YSRP) magmatism. Particularly, how do these magma bodies accumulate in the mid to upper crust underlying the Yellowstone Caldera, and furthermore, what role do hydrothermal fluids play in their ascent? During the summer 2017 field season, two field teams from Oregon State University and the University of Wisconsin-Madison installed forty-four wideband MT stations within and around the caldera, and using data slated for joint 3-D inversion with existing seismic data, two 2-D vertical conductivity sections of the crust and upper mantle were constructed. These models, in turn, provide preliminary insight into the emplacement of crustal magma bodies and hydrothermal processes in the YSRP region.

Fiskenaesset Anorthosite Complex: Stable isotope evidence for shallow emplacement into Archean ocean crust

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peck, W.H.; Valley, J.W.

1996-06-01

Oxygen and hydrogen isotope ratios indicate that unusual rocks at the upper contact of the Archean Fiskenaesset Anorthosite Complex at Fiskenaesset Harbor (southwest Greenland) are the products of hydrothermal alteration by seawater at the time of anorthosite intrusion. Subsequent granulite-facies metamorphism of these Ca-poor and Al- and Mg-rich rocks produced sapphirine- and kornerupine-bearing assemblages. Because large amounts of surface waters cannot penetrate to depths of 30 km during granulite-facies metamorphism, the isotopic signature of the contact rocks must have been obtained prior to regional metamorphism. The stable isotope and geochemical characteristics of the contact rocks support a model of shallowmore » emplacement into Archean ocean crust for the Fiskenaesset Anorthosite Complex. 45 refs., 3 figs., 2 tabs.« less

The intercrater plains of Mercury and the Moon: Their nature, origin and role in terrestrial planet evolution. Chronology of surface history of the Moon. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Leake, M. A.

1982-01-01

The sequence of events is described that occurred from the time that the ancient lunar crust solidified (about 4.4. billion years ago) and anorthositic high lands dominated the surface, until the global contraction (cooling) that began around 3.3 billion years ago when late stage basalts were emplaced at basin margins where fractures penetrated to subsurface tensional zones. The lunar intercrater plains may be linked with early KREEP volcanism, the LKFM basalt source region, and the first stages of mare volcanism. Ages of KREEP bracket the possible ages of the pre-Imbrian plains, and overlap the initial stages of mare basalt emplacement. Both plains are extruded under the same tensional tectonic regime.

U-Pb isotopic evidence for accretion of a continental microplate in the Zalm region of the Saudi Arabian Shield

USGS Publications Warehouse

Stacey, J.S.; Agar, R.A.

1986-01-01

U-Pb zircon age determinations show that this "Andean" continental margin developed before about 720 Ma, and emplacement of calc-alkaline plutonic rocks continued until about 690 Ma. During the period 690-640 Ma, the continental Afif microplate collided with the Asir terrane as part of the Nabitah orogeny. At approximately 640 Ma ago, the Najd strike-slip orogen commenced with a dextral phase that controlled the emplacement of granitic plutons as well as the development of a series of large pull-apart grabens. Some of these grabens were floored by new oceanic crust and were filled with volcano-sedimentary rocks of the Bani Ghayy group. Subsequently, the Najd fault system changed to sinistral strike slip motion at about 620 Ma ago.

Shale oil recovery process

DOEpatents

Zerga, Daniel P.

1980-01-01

A process of producing within a subterranean oil shale deposit a retort chamber containing permeable fragmented material wherein a series of explosive charges are emplaced in the deposit in a particular configuration comprising an initiating round which functions to produce an upward flexure of the overburden and to initiate fragmentation of the oil shale within the area of the retort chamber to be formed, the initiating round being followed in a predetermined time sequence by retreating lines of emplaced charges developing further fragmentation within the retort zone and continued lateral upward flexure of the overburden. The initiating round is characterized by a plurality of 5-spot patterns and the retreating lines of charges are positioned and fired along zigzag lines generally forming retreating rows of W's. Particular time delays in the firing of successive charges are disclosed.

Well casing-based geophysical sensor apparatus, system and method

DOEpatents

Daily, William D.

2010-03-09

A geophysical sensor apparatus, system, and method for use in, for example, oil well operations, and in particular using a network of sensors emplaced along and outside oil well casings to monitor critical parameters in an oil reservoir and provide geophysical data remote from the wells. Centralizers are affixed to the well casings and the sensors are located in the protective spheres afforded by the centralizers to keep from being damaged during casing emplacement. In this manner, geophysical data may be detected of a sub-surface volume, e.g. an oil reservoir, and transmitted for analysis. Preferably, data from multiple sensor types, such as ERT and seismic data are combined to provide real time knowledge of the reservoir and processes such as primary and secondary oil recovery.

Igneous evolution of a complex laccolith-caldera, the Solitario, Trans-Pecos Texas: Implications for calderas and subjacent plutons

USGS Publications Warehouse

Henry, C.D.; Kunk, Michael J.; Muehlberger, W.R.; McIntosh, W.C.

1997-01-01

The Solitario is a large, combination laccolith and caldera (herein termed "laccocaldera"), with a 16-km-diameter dome over which developed a 6 x 2 km caldera. This laccocaldera underwent a complex sequence of predoming sill, laccolith, and dike intrusion and concurrent volcanism; doming with emplacement of a main laccolith; ash-flow eruption and caldera collapse; intracaldera sedimentation and volcanism; and late intrusion. Detailed geologic mapping and 40Ar/39Ar dating reveal that the Solitario evolved over an interval of approximately 1 m.y. in three distinct pulses at 36.0, 35.4, and 35.0 Ma. The size, duration, and episodicity of Solitario magmatism are more typical of large ash-flow calderas than of most previously described laccoliths. Small volumes of magma intruded as abundant rhyolitic to trachytic sills and small laccoliths and extruded as lavas and tuffs during the first pulse at 36.0 Ma. Emplacement of the main laccolith, doming, ash-flow eruption, and caldera collapse occurred at 35.4 Ma during the most voluminous pulse. A complex sequence of debris-flow and debris-avalanche deposits, megabreccia, trachyte lava, and minor ash-flow tuff subsequently filled the caldera. The final magmatic pulse at 35.0 Ma consisted of several small laccoliths or stocks and numerous dikes in caldera fill and along the ring fracture. Solitario rocks appear to be part of a broadly cogenetic, metaluminous suite. Peralkaline rhyolite lava domes were emplaced north and west of the Solitario at approximately 35.4 Ma, contemporaneous with laccolith emplacement and the main pulse in the Solitario. The spatial and temporal relation along with sparse geochemical data suggest that the peralkaline rhyolites are crustal melts related to the magmatic-thermal flux represented by the main pulse of Solitario magmatism. Current models of laccolith emplacement and evolution suggest a continuum from initial sill emplacement through growth of the main laccolith. Although the Solitario laccocaldera followed this sequence of events, our field and 40Ar/39Ar data demonstrate that it developed through repeated, episodic magma injections, separated by 0.4 to 0.6 m.y. intervals of little or no activity. This evolution requires a deep, long-lived magma source, well below the main laccolith. Laccoliths are commonly thought to be small, shallow features that are not representative of major, silicic magmatic systems such as calderas and batholiths. In contrast, we suggest that magma chambers beneath many ashflow calderas are tabular, floored intrusions, including laccoliths. Evidence for this conclusion includes the following: (1) many large plutons are recognized to be laccoliths or at least tabular, (2) the Solitario and several larger calderas are known to have developed over laccoliths, and (3) magma chambers beneath calderas, which are as much as 80 km in diameter, cannot be as deep as they are wide or some would extend into the upper mantle. The Solitario formed during a tectonically neutral period following Laramide deformation and preceding Basin and Range extension. Therefore, space for the main laccolith was made by uplift of its roof and possibly subsidence of the floor, not by concurrent faulting. Laccolith-type injection is probably a common way that space is made for magma bodies of appreciable areal extent in the upper crust.

Emplacement of the La Peña alkaline igneous complex, Mendoza, Argentina (33° S): Implications for the early Miocene tectonic regime in the retroarc of the Andes

NASA Astrophysics Data System (ADS)

Pagano, D. S.; Galliski, M. A.; Márquez-Zavalía, M. F.

2014-03-01

The La Peña alkaline complex (LPC) of Miocene age (18-19 Ma) lies on the eastern front of the Precordillera (32°41ʹ34ʺS, 68°59ʹ48″W, 1400-2900 m a.s.l.), 30 km northwest of Mendoza city, Argentina. It is a subcircular massif of 19 km2 and 5 km in diameter, intruded in the metasedimentary sequence of the Villavicencio Formation of Silurian-Devonian age. It is the result of integration of multiple pulses derived from one or more deep magma chambers, which form a suite of silicate rocks grouped into: a clinopyroxenite body, a central syenite facies with a large breccia zone at the contact with the clinopyroxenite, bodies of malignite, trachyte and syenite porphyry necks, and a system of radial and annular dikes of different compositions. Its subcircular geometry and dike system distribution are frequent features of intraplate plutons or plutons emplaced in post-orogenic settings. These morphostructural features characterize numerous alkaline complexes worldwide and denote the importance of magmatic pressures that cause doming with radial and annular fracturing, in a brittle country rock. However, in the LPC, the attitude of the internal fabric of plutonic and subvolcanic units and the preferential layout of dikes match the NW-SE extensional fractures widely distributed in the host rock. This feature indicates a strong tectonic control linked to the structure that facilitate space for emplacement, corresponding to the brittle shear zone parallel to the N-S stratigraphy of the country rock. Shearing produced a system of discontinuities, with a K fractal fracture pattern, given by the combination of Riedel (R), anti-Riedel (R‧), (P) and extensional (T) fracture systems, responsible for the control of melt migration by the opening of various fracture branches, but particularly through the NW-SE (T) fractures. Five different pulses would have ascent, (1) an initial one from which cumulate clinopyroxenite was formed, (2) a phase of mafic composition represented by dikes cross-cutting the clinopyroxenite, (3) a malignite facies that causes a small breccia in the clinopyroxenite, (4) a central syenite facies that develops breccias at the contact with the clinopyroxenite and, finally, (5) porphyry necks and a system of radial dikes intruding all units. At the moment of the emplacement different mechanisms would have acted, they summarized in: 1) opening of discontinuities synchronous to the magma circulation as the principal mechanism for formation of dikes and conduits; 2) stoping processes, that play an important role in the development of the breccia zone and enabling an efficient transference of material during the emplacement of the syenitic magma and 3) shear-related deformation (regional stress), affected the internal fabric of the facies, causing intracrystalline deformation and submagmatic flow, which is very evident in the central syenite intrusive. The kinematic analysis of shear planes allows proposing that emplacement of the LPC took place in a transtensive regime, which would have occurred in the back-arc of the Andes orogen, during a long period spanning from Miocene to the present, of the compressive deformation responsible, westward and at the same latitude, for the development of the Aconcagua fold and thrust belt.

Dyke emplacement at the incipient Namibian margin - structural and anisotropy of magnetic susceptibility (AMS) studies in the Henties Bay - Outjo Dyke Swarm

NASA Astrophysics Data System (ADS)

Wiegand, Miriam; Trumbull, Robert; Greiling, Reinhard O.

2010-05-01

During the Cretaceous breakup of western Gondwana, the conjugate Namibian and South American margins were the site of flood basalts, mafic dyke swarms and subvolcanic intrusive complexes which make up the South Atlantic Large Igneous Province and the volcanic margin of northwestern Namibia. This contribution presents data on internal fabrics in mafic dykes (mostly subalkaline tholeiitic dolerites) from the major Henties Bay-Outjo dyke swarm (HOD) in coastal and inland NW Namibia, which are discussed in terms of magma emplacement. The HOD is some 100 km wide and extends at least 500 km from the continental margin. The dykes were emplaced in Neoproterozoic (Panafrican) Damara mobile belt, which is bounded by the Angola/Congo craton on the north and the Kalahari craton on the south. Field relations and radiometric dates indicate Early Cretaceous emplacement ages for the dykes. In coastal exposures north of the HOD, dolerite dykes are mainly coast-parallel (NNW-SSE) and syn-tectonic with normal faults that offset Etendeka lavas. Coast-parallel dykes are also common within the HOD, but the great majority of dykes strike NE-SW. We observed the latter dykes to crosscut coast-parallel ones. But the opposite relationship is also found locally. The dominant NE-SW strike of HOD indicates the influence of the Damara Belt structural grain at a regional scale, but locally the dykes commonly crosscut basement foliations and lithologic contacts. Depending on dyke thickness, which varies in the HOD from a few cm to about 50 m), the dykes are variably fine grained with chilled margins. Vesiculation is seldom observed. Typical textures are intersertal to subophitic, with plagioclase, clinopyroxene and olivine being the main mineral phases. Common minor minerals include opaque oxides and acicular apatite. Linear dykes are composed of segments, 10 m to some km in length, which are connected by transfer zones. Often a minor horizontal displacement can be observed between these segments. Dyke margins are often offset at pre-existing fractures or they may follow suitably oriented ones. These observations imply a major horizontal principal stress parallel to the dykes, at a high angle with the coastline. Successive, multiple intrusions of subparallel dykes imply a crack-seal mechanism of emplacement. We analysed by the anisotropy of magnetic susceptibility (AMS) or magnetic fabric of dykes and sampled at 24 different stations in the area between Henties Bay at the coast and Outjo ca. 300 km inland. Most of the dykes were sampled on both margins and some also in the centre. This strategy allows inferring magma flow directions from the AMS results. Magnetic susceptibility is relatively high, around 20x10E-3 SI units. Microscopic studies and kappa-T measurements indicate magnetite and titanomagnetite as dominating magnetic minerals. The anisotropy of magnetic susceptibility is mostly low, indicating a primary fabric with little secondary overprint. A few samples show higher anisotropies and distinctly prolate fabrics, which are interpreted as the expression of a strong flow fabric. Steep long axes of such fabrics may be related to vertical melt emplacement at intrusion centres, and shallow plunges to horizontal flow along the dyke fractures. Oblate fabrics were observed in places, which define a flat-lying magnetic foliation, that we tentatively attribute to a rheologic disturbance or gravitational deformation at the top end of dykes, where the melt was prevented from flowing further upwards.

The Summer 1997 Eruption at Pillan Patera on Io: Implications for Ultrabasic Lava Flow Emplacement

NASA Technical Reports Server (NTRS)

Williams, David A.; Davies, Ashley G.; Keszthelyi, Laszlo; Greeley, Ronald

2001-01-01

Galileo data and numerical modeling were used to investigate the summer 1997 eruption at Pillan Patera on Io. This event, now defined as 'Pillanian' eruption style, included a high-temperature (greater than 1600 C), possibly ultrabasic, 140-km-high plume eruption that deposited dark, orthopyroxene-rich pyroclastic material over greater than 125,000 sq km, followed by emplacement of dark flow-like material over greater than 3100 sq km to the north of the caldera. We estimate that the high-temperature, energetic episode of this eruption had a duration of 52- 167 days between May and September 1997, with peak eruption temperatures around June 28, 1997. Galileo 20 m/pixel images of part of the Pillan flow field show a widespread, rough, pitted surface that is unlike any flow surface we have seen before. We suggest that th.s surface may have resulted from (1) a fractured lava crust formed during rapid, low-viscosity lava surging, perhaps including turbulent flow emplacement; (2) disruption of the lava flow by explosive interaction with a volatile-rich substrate: or (3) a combination of 1 and 2 with or without accumulation of pyroclastic materials on the surface. Well-developed flow lobes are observed, suggesting that this is a relatively distal part of the flow field. Shadow measurements at flow margins indicate a thickness of approx. 8-10 m. We have modeled the emplacement of putative ultrabasic flows from the summer 1997 Pillan eruption using constraints from new Galileo data. Results suggest that either laminar sheet flows or turbulent channelized flows could have traveled 50-150 km on a flat. unobstructed surface, which is consistent with the estimated length of the Pillan flow field (approx. 60 km). Our modeling suggests low thermal erosion rates (less than 0.1 m/d), and that the formation of deep (greater than 20 m) erosion channels was unlikely, especially distal to the source. We calculate a volumetric flow rate of approx. 2-7 x l0(exp 3) cu m/s, which is greater than those for typical Mauna Loa/Kilauea flows but comparable to those for the (1783) Laki eruption and the inferred flow rates of the Roza flows in the Columbia River flood basalts. The differences in ultrabasic eruption styles on Earth and Io appear to be controlled by the different eruption environments: Plumes at sites of ultrabasic eruptions on Io suggest strong magma-volatile: interactions on a low-gravity body lacking an atmosphere, whereas the geology at sites of komatiite eruptions on Earth suggest mostly submarine emplacement of thick flows with a pronounced lack of subaerial explosive activity.

The growth history of the Lago Della Vacca (Southern Adamello Massive, Italy) intrusion from field observations, thermal and rheological modelling

NASA Astrophysics Data System (ADS)

Rust, A.; Annen, C.; Blundy, J. D.; Caricchi, L.

2010-12-01

The Lago Della Vacca granitoid is an intrusive body emplaced at about 4-6 km in up to 1 My. The core of the body is characterised by the presence of dyke-like structures, enclave-swarms and randomly distributed enclaves, which appear undeformed. Enclaves become oblate with the short axis perpendicular to the foliation, which, in turn follows the margin of the plutonic body (John and Blundy, 1993). Geothermometry and experimental data have been used to constrain the temperature of injection of the mafic component (1273-1323 K), the temperature of the host granitic magma (1173-1223), and to characterise the evolution of crystallinity with temperature for both magmas (Blundy and Sparks, 1992). Based on these data thermal and rheological modelling have been combined to interpret the growth and deformation history of the Lago della Vacca intrusive body. The pluton was modeled as a series of incrementally emplaced nested cylinders with 1D-cylindrical conductive heat transfer. The evolution of temperature and melt fraction distribution in the pluton and country rock were determined and used as input parameters for the rheological modelling. The rheology of each magma depends on the viscosity of the melt and, more importantly, on crystallinity. Field observations suggest that the mafic magma was injected as dykes. Their partial or total disaggregation produced mafic enclaves. The presence of randomly distributed enclaves in the core of Lago Della Vacca body indicates that convection was active in this portion of the intrusion. The undeformed nature of the enclaves in this region also implies that the contrast in temperature between host magma and mafic material produced a sudden (hours) rheological inversion with the mafic magma becoming more viscous than the felsic end-member. In these conditions, the enclaves would be transported passively by the felsic-host without suffering any substantial deformation. Thermal modelling indicates that to maintain the core of the pluton above solidus temperature between injections requires either fast emplacement or high initial temperatures of the country rocks. The latter is unlikely for emplacement depths of 4-6 km and as a consequence we infer duration of emplacement up to few hundred thousand years. The wider range of zircon ages may reflect combined intrusion and thermal relaxation times. The extremely flattened enclaves at the rim of the pluton are the result of deformation at lower temperature as the core inflates. As magmas cool the crystallinity of host become as high as the enclaves, resulting in a small viscosity contrast between them, which can be seen as a Window of Mutual Deformability (WMD). Further straining results in a homogeneous deformation and flattening of the enclaves parallel to the margins.

Paleomagnetism of Proterozoic mafic dikes from the Tobacco Root Mountains, southwest Montana

USGS Publications Warehouse

Harlan, S.S.; Geissman, J. Wm; Snee, L.W.

2008-01-01

Paleomagnetic data from Proterozoic mafic dikes in southwestern Montana provides evidence for two distinct episodes of subparallel dike emplacement at ca. 1450 and 780 Ma. Published geochemical data from dikes in the southern Tobacco Root Mountains has identified three distinct compositional groups, termed groups A, B, and C. Geochronological data from the group A dikes yielded a Sm-Nd age of 1448 ?? 49 Ma. Emplacement of these dikes is thought to reflect mafic magmatism associated with extension accompanying development of the adjacent Mesoproterozoic Belt Basin. Paleomagnetic results from these dikes and a group C dike yield antipodal magnetizations with a group-mean direction of D = 225.0??, I = 61.8?? (k = 27.9, ??95 = 7.7??, N = 14 independent means/24 sites). The average paleomagnetic pole (8.7??N, 216.1??E, A95 = 10.3??) is considered to be primary on the basis of positive baked contact tests and similarity to poles of ca. 1.45-1.4 Ga from intrusions elsewhere in North America, but is discordant with respect to poles from age equivalent sedimentary rocks of the Meosoproterozoic Belt Supergroup. 40Ar/39Ar dates from geochemical group B dikes are consistent with published U-Pb dates that demonstrate dike emplacement at 780 Ma as part of the regional Gunbarrel magmatic event. Hornblende concentrates from the group B dikes yield 40Ar/39Ar apparent ages of 778-772 Ma, whereas biotite from a baked contact zone yielded a plateau date of 788 Ma. Paleomagnetic results from the group B dikes yield a mean direction of D = 301.5??, I = -17.1?? (k = 65.7, ??95 = 4.0??, N = 12 independent means/23 sites) with a paleomagnetic pole at 14.6??N, 127.0??E (A95 = 3.2??). The combination of geochronologic data, results of a baked contact test, and spatial agreement of the paleomagnetic poles with poles of similar age elsewhere in North America indicates that this is also a primary magnetization associated with dike emplacement. Paleomagnetic data from some of the Tobacco Root Mountains dikes provide evidence that they were partially to completely remagnetized during latest Cretaceous to early Tertiary time, perhaps due to thermal affects associated with emplacement of the Late Cretaceous Tobacco Root Batholith. The overall agreement of paleomagnetic poles from the Proterozoic dikes with those of age equivalent rocks elsewhere in North America and agreement of the secondary magnetization with expected directions for the latest Cretaceous/early Tertiary indicate that the rocks of the Tobacco Root Mountains have not experienced significant tilting or vertical axis rotation since the Mesoproterozoic. The new paleomagnetic poles from this study thus provide key data for refining Meso- and Neoproterozoic parts of the North American APW path. ?? 2008 Elsevier B.V. All rights reserved.

The Summer 1997 Eruption at Pillan Patera on Io: Implications for Ultrabasic Lava Flow Emplacement

NASA Technical Reports Server (NTRS)

Williams, David A.; Davies, Ashley G.; Keszthelyi, Laszlo P.; Greeley, Ronald

2001-01-01

Galileo data and numerical modeling were used to investigate the summer 1977 eruption at Pillan Patera on Io. This event, now defined as "Pillanian" eruption style, included a high-temperature (greater than 1600 C), possible ultrabasic , 140-km-high plume eruption that deposited dark, orthopyroxene-rich pyroclastic material over greater than 125,000 sq km, followed by emplacement of dark flow-like material over greater than 3100 sq km to the north of the caldera. We estimate that the high-temperature, energetic episode of this eruption had a duration of 52 - 167 days between May and September 1997, with peak eruption temperatures around June 28, 1997. Galileo 20 m/pixel images of part of the Pillan flow field show a wide-spread, rough, pitted surface that is unlike any flow surface we have seen before. We suggest that this surface may have resulted from: 1. A fractured lava crust formed during rapid, low-viscosity lava surging, perhaps including turbulent flow emplacement. 2. Disruption of the lava flow by explosive interaction with a volatile-rich substrate. or 3. A combination of 1 and 2 with or without accumulation of pyroclastic material on the surface. Well-developed flow lobes are observed, suggesting that this is a relatively distant part of the flow field.Shadow measurements at flow margins indicate a thickness of-8 - 10 m. We have modeled the emplacement of putative ultrabasic flow from the summer 1997 Pillan eruption using constraints from new Galileo data. Results suggest that either laminar sheet flows or turbulent channelized flows could have traveled 50 - 150 km on a flat, unobstructed surface, which is consistent with the estimated length of the Pillan flow field (approx. 60 km). Our modeling suggests low thermal erosion rates (less than 4.1 m/d), and that the formation of deep (greater than 20 m) erosion channels was unlikely, especially distal to the source. We calculate a volumetric flow rate of approx. 2 - 7 x 10(exp 3)cu m/s, which is greater than those for typical Mauna Loa/Kilaueaq flows but comparable to those for the (1783) Laki eruption and the inferred flow rates of the Roza flows in the Columbia River flood basalts. The differences in ultrabasic eruption styles on Earth and Io appear to be controlled by the different eruption environments; Plumes at sites of ultrabasic eruptions on Io suggest strong magma-volatile interactions on a low-gravity body lacking an atmosphere, whereas the geology at sites of komatiite eruptions on Earth suggest mostly submarine emplacement of thick flows with a pronounced lack of subaerial explosive activity.

Various-scale controls of complex subduction dynamics on magmatic-hydrothermal processes in eastern Mediterranean

NASA Astrophysics Data System (ADS)

Menant, Armel; Jolivet, Laurent; Sternai, Pietro; Ducoux, Maxime; Augier, Romain; Rabillard, Aurélien; Gerya, Taras; Guillou-Frottier, Laurent

2014-05-01

In subduction environment, magmatic-hydrothermal processes, responsible for the emplacement of magmatic bodies and related mineralization, are strongly controlled by slab dynamics. This 3D dynamics is often complex, resulting notably in spatial evolution through time of mineralization and magmatism types and in fast kinematic changes at the surface. Study at different scales of the distribution of these magmatic and hydrothermal products is useful to better constrain subduction dynamics. This work is focused on the eastern Mediterranean, where the complex dynamics of the Tethyan active margin since the upper Cretaceous is still largely debated. We propose new kinematic reconstructions of the region also showing the distribution of magmatic products and mineralization in space and time. Three main periods have thus been identified with a general southward migration of magmatic and ore bodies. (1) From late Cretaceous to lower Paleocene, calc-alkaline magmatism and porphyry Cu deposits emplaced notably in the Balkans, along a long linear cordillera. (2) From late Paleocene to Eocene, a barren period occurred while the Pelagonian microcontinent was buried within the subduction zone. (3) Since the Oligocene, Au-rich deposits and related K-rich magmatism emplaced in the Rhodopes, the Aegean and western Anatolian extensional domains in response to fast slab retreat and related mantle flow inducing the partial melting of the lithospheric mantle or the base of the upper crust where Au was previously stored. The emplacement at shallow level of this mineralization was largely controlled by large-scale structures that drained the magmatic-hydrothermal fluids. In the Cyclades for instance, field studies show that Au-rich but also base metal-rich ore deposits are syn-extensional and spatially related to large-scale detachment systems (e.g. on Tinos, Mykonos, Serifos islands), which are recognized as subduction-related structures. These results highlight the importance at different scales of subduction dynamics and related mantle flow on the emplacement of mineralization and magmatic bodies. Indeed, besides a general southward migration of the magmatic-hydrothermal activity since the upper Cretaceous from the Balkans to the present-day Aegean volcanic arc, a secondary westward migration is observed during the Miocene from the Menderes massif to the Cyclades. This feature is a possible consequence of a slab tearing event and related mantle flow, as suggested notably by tomographic models below western Anatolia. To further test the effects of slab retreat and tearing on the flow and temperature field within the mantle, we performed 3D thermo-mechanical numerical modeling. Models suggest that the asthenospheric flow induced by the development of a slab tear controls the migration of magmatic products stored at the base of the crust, influencing the distribution of potentially fertile magmas within the upper crust.

Impact Melt Emplacement on Mercury

NASA Astrophysics Data System (ADS)

Daniels, J. W.; Neish, C. D.

2018-05-01

This work proposes that fresh craters on rocky bodies may deposit impact melt externally ultimately according to the strength of its surface gravity, regardless of the body's surface topography and melt abundance.

Magma traps and driving pressure: consequences for pluton shape and emplacement in an extensional regime

NASA Astrophysics Data System (ADS)

Hogan, John P.; Price, Jonathan D.; Gilbert, M. Charles

1998-09-01

The level of emplacement and final form of felsic and mafic igneous rocks of the Wichita Mountains Igneous Province, southwestern Oklahoma, U.S.A. are discussed in light of magma driving pressure, lithostatic load, and crustal magma traps. Deposition of voluminous A-type rhyolites upon an eroded gabbroic substrate formed a subhorizontal strength anisotropy that acted as a crustal magma trap for subsequent rising felsic and mafic magma. Intruded along this crustal magma trap are the A-type sheet granites (length/thickness 100:1) of the Wichita Granite Group, of which the Mount Scott Granite sheet is typical, and smaller plutons of biotite bearing Roosevelt Gabbro. In marked contrast to the subhorizontal granite sheets, the gabbro plutons form more equant stocks with flat roofs and steep side walls. Late Diabase dikes cross-cut all other units, but accompanying basaltic flows are extremely rare in the volcanic pile. Based on magmastatic calculations, we draw the following conclusions concerning the level of emplacement and the shape of these intrusions. (1) Magma can rise to a depth at which the magma driving pressure becomes negligible. Magma that maintains a positive driving pressure at the surface has the potential to erupt. (2) Magma ascent may be arrested at a deeper level in the crust by a subhorizontal strength anisotropy (i.e. crustal magma trap) if the magma driving pressure is greater than or equal to the lithostatic load at the depth of the subhorizontal strength anisotropy. (3) Subhorizontal sheet-intrusions form along crustal magma traps when the magma driving pressure greatly exceeds the lithostatic load. Under such conditions, the magma driving pressure is sufficent to lift the overburden to create the necessary space for the intrusion. (4) Thicker steep-sided stocks or batholiths, with flat roofs, form at crustal magma traps when the magma driving pressure approximates that of the lithostatic load. Under these conditions, the necessary space for the intrusion must be created by other mechanisms (e.g. stoping). (5) Subvertical sheets (i.e. dikes) form when the magma driving pressure is less than the lithostatic load at the level of emplacement.

Comparative use of TIMS and SHRIMP for U Pb zircon dating of A-type granites and mafic tholeiitic layered complexes and dykes from the Corsican Batholith (France)

NASA Astrophysics Data System (ADS)

Cocherie, A.; Rossi, Ph.; Fanning, C. M.; Guerrot, C.

2005-05-01

The Corsica-Sardinia batholith in the southern realm of the Hercynian belt of Europe shows evidence for gravitational collapse of this part of the mountain belt, causing major felsic and mafic magmatism. The latest intrusions are composed of leucomonzogranite and late metaluminous and alkaline granite, associated with tholeiitic layered complexes and dykes. Three dating methods on zircon (Pb-evaporation, ID-TIMS and SHRIMP) were used to unravel the chronology of these felsic and mafic rocks. Dating of zircons by the conventional U-Pb method, using TIMS after zircon dissolution, achieved an analytical uncertainty of 1 Ma for favourable cases. The TIMS Pb-evaporation technique resulted in ages with an uncertainty range of 4 to 8 Ma. After 15 to 20 analyses with the SHRIMP method, a precision ranging from 2 to 5 Ma was obtained (all at 2 σ). The three methods applied to the same zircon population extracted from four A-type granites, show that the uncertainty ranges within 2-5 Ma according to the sample. This error seems to correspond to the real geochronological uncertainty that can be achieved. The results obtained show that all six tested alkaline granites were emplaced during a very short interval of about 3-5 Ma at about 288 Ma, almost contemporaneous with the leucomonzogranite emplacement (291-287 Ma) that ended the batholith formation. In addition, there is no significant gap with the age of emplacement of the mafic tholeiitic magmatism (around 286 Ma) crosscutting the "A-type" granites. The late alkaline granites definitely do not show up here as precursors of the Tethyan rifting that began at about 170 Ma, i.e. some 100 Ma after their emplacement. It is thus necessary to examine if alternative hypotheses to the anorogenic model of the A-type Younger Granite province better fit the new geochronological data. A model involving depleted continental-crust derived magma should be compatible with the timing and geodynamical constraints as far as isotopic data are concerned.

Temporal evolution of the Roccamonfina volcanic complex (Pleistocene), Central Italy

NASA Astrophysics Data System (ADS)

Rouchon, V.; Gillot, P. Y.; Quidelleur, X.; Chiesa, S.; Floris, B.

2008-10-01

The Roccamonfina volcanic complex (RVC), in southern Italy, is an Early to Middle Pleistocene stratovolcano sharing temporal and morphological characteristics with the Somma-Vesuvius and the Alban Hills; both being associated with high volcanic hazard for the cities of Naples and Rome, respectively. The RVC is important for the understanding of volcanic evolution in the Roman and Campanian volcanic provinces. We report a comprehensive study of its evolution based on morphological, geochemical and K-Ar geochronological data. The RVC was active from c.a. 550 ka to 150 ka. Its evolution is divided into five stages, defining a volcanic pulse recurrence time of c.a. 90-100 kyr. The two initial stages, consisted in the construction of two successive stratovolcanoes of the tephrite-phonolite, namely "High-K series". The first stage was terminated by a major plinian eruption emplacing the trachytic Rio Rava pumices at 439 ± 9 ka. At the end of the second stage, the last High-K series stratovolcano was destroyed by a large sector collapse and the emplacement of the Brown Leucitic Tuff (BLT) at 353 ± 5 ka. The central caldera of the RVC is the result of the overlapping of the Rio Rava and of the BLT explosions. The plinian eruption of the BLT is related to the emptying of a stratified, deep-seated HKS magma chamber during the upwelling of K series (KS) magma, marking a major geochemical transition and plumbing system re-organization. The following stage was responsible for the emplacement of the Lower White Trachytic Tuff at 331 ± 2 ka, and of basaltic-trachytic effusive products erupted through the main vent. The subsequent activity was mainly restricted to the emplacement of basaltic-shoshonitic parasitic cones and lava flows, and of minor subplinian deposits of the Upper White Trachytic Tuff between 275 and 230 ka. The northern crater is most probably a maar that formed by the phreatomagmatic explosion of the Yellow Trachytic Tuff at 230 ka. The latest stage of activity featured the edification of the central shoshonitic domes at c.a. 150 ka.

Fracture mechanics and geochemical factors influencing the emplacement mechanisms of the Stewart Lithia gem bearing granitic pegmatite, Pala District, San Diego County, California

NASA Astrophysics Data System (ADS)

Patterson, Jeffrey E.

The emplacement mechanisms and cooling characteristics of pegmatites are not well understood, yet little work has been done on this subject. Historically, it is the pegmatite mineralogy and zonation that has been the focus of attention because of fascination with giant sized crystals, diversity of mineralization, and abundance of minerals containing important strategic elements, (Li, Be, Ta, Nb, and others). In this thesis the subject of the emplacement mechanisms is a synergistic approach from geophysical and engineering viewpoints, using the principals of fracture mechanics to determine the properties related to emplacement. From this, the cooling characteristics are considered to explain the zonation of a pegmatite based upon the temperature of crystallization of each mineral. This provides a model to image the position of each mineral according to the temperature profiles over time. Finally, the mineral growth characteristics are considered in light of the boundary conditions placed upon them by the cooling period. To test these hypothetical conditions in the real world, the Stewart Lithia Pegmatite, Pala, California, has been evaluated both physically and geochemically. The structure of the pegmatite was examined along strike and along dip, as exposed in underground workings. The analyses of these data show that there are 5 discreet divisions along strike. The analyses of the geochemical data for precisely located tourmalines shows that these divisions are composed of approximately 10 discreet pulses, with the economically important "Chimney Division" containing all 10. The importance of this work is that it demonstrates the following. A complex pegmatite is more likely to consist of multiple pulses of different melt composition than a single pulse with un-explainable mineralogy and zonation; Giant crystals are more likely due to rapid polymerization of a few mineral species where the cooling rate and crystallization rate are nearly equal; The range of mineral sizes to eleven orders of magnitude is due to the minimal rate of cooling, with the smallest crystals nucleating and not growing because there is no thermal differential driving force; and gem crystals generally only occur in fluid filled miarolitic cavities.

Observations of hybrid seismic events at Soufriere Hills Volcano, Montserrat: July 1995 to September 1996

USGS Publications Warehouse

White, R.A.; Miller, A.D.; Lynch, L.; Power, J.

1998-01-01

Swarms of small repetitive events with similar waveforms and magnitudes are often observed during the emplacement of lava domes. Over 300 000 such events were recorded in association with the emplacement of the lava dome at Soufriere Hills Volcano, Montserrat, from August 1995 through August 1996. These events originated <2-3 km deep. They exhibited energy ranging over ??1.5-4.5 Hz and were broader band than typical long-period events. We term the events 'hybrid' between long-period and voclano-tectonic. The events were more impulsive and broader band prior to, compared with during and after, periods of inferred increased magma flux rate. Individual swarms contained up to 10 000 events often exhibiting very similar magnitudes and waveforms throughout the swarm. Swarms lasted hours to weeks, during which inter-event intervals generally increased, then decreased, often several times. Long-duration swarms began about every two months starting in late September 1995. We speculate that the events were produced as the magma column degassed into adjacent cracks.Swarms of small repetitive events with similar waveforms and magnitudes are often observed during the emplacement of lava domes. Over 300,000 such events were recorded in association with the emplacement of the lava dome at Soufriere Hills Volcano, Montserrat, from August 1995 through August 1996. These events originated <2-3 km deep. They exhibited energy ranging over approximately 1.5-4.5 Hz and were broader band than typical long-period events. We term the events `hybrid' between long-period and volcano-tectonic. The events were more impulsive and broader band prior to, compared with during and after, periods of inferred increased magma flux rate. Individual swarms contained up to 10,000 events often exhibiting very similar magnitudes and waveforms throughout the swarm. Swarms lasted hours to weeks, during which inter-event intervals generally increased, then decreased, often several times. Long-duration swarms began about every two months starting in late September 1995. We speculate that the events were produced as the magma column degassed into adjacent cracks.

Regional implications of geochemistry and style of emplacement of Miocene I-type diorite and granite, Delos, Cyclades, Greece

NASA Astrophysics Data System (ADS)

Pe-Piper, Georgia; Piper, David J. W.; Matarangas, Dionysis

2002-01-01

The Miocene plutons of the Cyclades were emplaced in a subduction setting during regional back-arc extension of continental crust, that led to flat-lying mid-crustal detachment faulting. Mapping of the island of Delos shows that quartz diorite and tonalite were emplaced as dykes in country rock of schist and marble within shear zones parallel to the extension direction. Mafic magmas were followed by numerous small batches of felsic magma, with magmatic and ductile deformation synchronous with magma emplacement. Late granite dykes occupy brittle fractures in the more deformed rocks. Mafic and intermediate rocks show a bimodal distribution of incompatible trace elements, with one group of broadly tholeiitic character and the other with substantial enrichment in Sr, Nb, and HFSE, but low Th and Ba. These differences appear to be inherited from two distinct mafic sources that are different from the mafic source for the plutons of the eastern Cyclades. Voluminous granodiorite results from these mafic magmas fractionating and/or mixing with felsic crustal material, some of which was derived by anatexis of a sedimentary protolith, indicated by high B and Mn. Some late granites appear derived from partial melting of Hercynian paragneiss. Regionally, the shear zones appear to be feeders to more extensive granitic plutons located at space produced at ramps in detachment fault zones. The shear zones parallel the Mid-Cycladic Lineament, a broad zone of displacement between two crustal blocks rotating in opposing directions as rollback took place at the Hellenic subduction zone. Distinctive geochemical features in Miocene igneous rocks suggests that these two blocks had quite different geological histories. The localisation of plutonism and core complexes near the Mid Cycladic Lineament suggests that this crustal-scale shear played a role in bringing subduction-derived magmas to mid-crustal levels. The heat supplied by the mafic magmas promoted ductile deformation high in the crust, where extension was concentrated, leading to the formation of core complexes. The regional extension resulted in progressive shallowing of the position of the granite solidus within the crust, leading to welding of the Mid-Cycladic Lineament, which is no longer seismically active.

Emplacement controls for the basaltic-andesitic radial dikes of Summer Coon volcano and implications for flank vents at stratovolcanoes

NASA Astrophysics Data System (ADS)

Harp, A. G.; Valentine, G. A.

2018-02-01

Mafic flank eruptions are common events that pose a serious hazard to the communities and infrastructure often encroaching on the slopes of stratovolcanoes. Flank vent locations are dictated by the propagation path of their feeder dikes. The dikes are commonly thought to propagate either laterally from the central conduit or vertically from a deeper source. However, these interpretations are often based on indirect measurements, such as surface deformation and seismicity at active systems, and several studies at eroded volcanoes indicate the propagation paths may be more complex. We investigated the Oligocene age Summer Coon volcano (Colorado, USA), where erosion has exposed over 700 basaltic-andesitic radial dikes, to constrain the propagation directions, geometries, and spatial distributions of mafic dikes within a stratovolcano. The mean fabric angle of aligned plagioclase crystals was measured in oriented samples from the margins of 77 dikes. Of the 41 dikes with statistically significant flow fabrics, 85% had fabric angles that were inclined—plunging both inward and outward relative to the center of the volcano. After comparing fabric angles to those reported in other studies, we infer that, while most of the dikes with outward-plunging fabrics descended toward the flanks from a source within the edifice and near its axis, dikes with inward-plunging fabrics ascended through the edifice and toward the flanks from a deeper source. A possible control for the inclination of ascending dikes was the ratio between magma overpressure and the normal stress in the host rock. While higher ratios led to high-angle propagation, lower ratios resulted in inclined emplacement. Dikes crop out in higher frequencies within a zone surrounding the volcano axis at 2500 m radial distance from the center and may be the result of ascending dikes, emplaced at similar propagation angles, intersecting the current level of exposure at common distances from the volcano axis. The process of inclined dike emplacement may be common at other stratovolcanoes and should be considered from a monitoring and hazard perspective as slight variations in the propagation angle would translate to major shifts in the anticipated vent location.

Noise Characteristics of EarthScope Transportable Array Posthole Sensor Emplacements in Alaska and Canada

NASA Astrophysics Data System (ADS)

Aderhold, K.; Frassetto, A.; Busby, R. W.; Enders, M.; Bierma, R. M.; Miner, J.; Woodward, R.

2016-12-01

From 2011 to 2015, IRIS has built or upgraded 67 broadband seismic stations in Alaska and western Canada as part of the EarthScope Transportable Array (TA) program. An additional 72 stations will be completed by the fall of 2016. Nearly all use new posthole seismometers, emplaced at 3 m depth in cased holes within fractured bedrock outcrops, permafrost, or soil. Based on initial tests in Alaska, New Mexico, and California, this emplacement technique was chosen to streamline logistics in challenging, remote conditions as well as optimize station performance. A versatile drill capable of operating with a hammer bit or auger was developed specifically for the TA and is light enough to be transported by helicopter in a single load. The drilling system is ideal for TA deployment logistics in Alaska, but could be adapted to many regional or permanent network operations because it is easily transported on a flatbed truck and manuevered into tight working locations. The TA will complete another 73 installations in 2017 and operate the full network of 268 real-time stations through at least 2019. The removal of some TA stations is planned for 2020, but upgrades to existing stations are permanent contributions to these networks. The TA stations are a proof of concept for a new approach to emplacement of seismometers across a large network and will enable high-quality scientific research as well as advances in hazard monitoring. To evaluate the new and upgraded stations, we use probability density functions of hourly power spectral density computed by the IRIS DMC MUSTANG metric service for the continuous data recorded through 2016. Our results show that the noise performance of TA postholes in Alaska and Canada show significant improvement over the tank vaults of the lower-48 TA. With an ideal posthole drilled into bedrock or permafrost, noise levels can approach the quality of GSN stations particularly on the horizontal channels at long periods [>70 seconds]. Stations also display a strong but expected regional and seasonal variation. We provide notable examples of station performance, focusing on regional trends as well as the performance of stations upgraded from surface vault to posthole configuration.

The Influence of Topography on the Emplacement Dynamics of Martian Lava flows

NASA Astrophysics Data System (ADS)

Tremblay, J.; Fitch, E. P.; Fagents, S. A.

2017-12-01

Lava flows on the Martian surface exhibit a diverse array of complex morphologies. Previous emplacement models, based on terrestrial flows, do not fully account for these observed complex morphologies. We assert that the topography encountered by the flow can exert substantial control over the thermal, rheological, and morphological evolution of the flow, and that these effects can be better incorporated into flow models to predict Martian flow morphologies. Our development of an updated model can be used to account for these topographical effects and better constrain flow parameters. The model predicts that a slope break or flow meander induces eddy currents within the flow, resulting in the disruption of the flow surface crust. The exposure of the flow core results in accelerated cooling of the flow and a resultant increase in viscosity, leading to slowing of the flow. A constant source lava flux and a stagnated flow channel would then result in observable morphological changes, such as overflowing of channel levees. We have identified five morphological types of Martian flows, representing a range of effusion rates, eruption durations and topographic settings, which are suitable for application of our model. To characterize flow morphology, we used imaging and topographic data sets to collect data on flow dimensions. For eight large (50 to hundreds of km long) channelized flows in the Tharsis region, we used the MOLA 128 ppd DEM and/or individual MOLA shot points to derive flow cross-sectional thickness profiles, from which we calculated the cross-sectional area of the flow margins adjacent to the main channel. We found that the largest flow margin cross sectional areas (excluding the channel) occur in association with a channel bend, typically near the bend apex. Analysis of high-resolution images indicates that these widened flow margins are the result of repeated overflows of the channel levees and emplacement of short flow lobes adjacent to the main flow. In the context of our model, the morphological changes associated with channel bends and slope breaks support our interpretation of lava crust disruption and enhanced flow cooling. We are currently working to obtain data for the additional three flow types and to further apply our lava emplacement model.

Controls on Lava Flow Morphology and Propagation: Using Laboratory Analogue Experiments

NASA Astrophysics Data System (ADS)

Peters, S.; Clarke, A. B.

2017-12-01

The morphology of lava flows is controlled by eruption rate, composition, cooling rate, and topography [Fink and Griffiths, 1990; Gregg and Fink, 2000, 2006]. Lava flows are used to understand how volcanoes, volcanic fields, and igneous provinces formed and evolved [Gregg and Fink., 1996; Sheth, 2006]. This is particularly important for other planets where compositional data is limited and historical context is nonexistent. Numerical modeling of lava flows remains challenging, but has been aided by laboratory analog experiments [Gregg and Keszrthelyi, 2004; Soule and Cashman, 2004]. Experiments using polyethylene glycol (PEG) 600 wax have been performed to understand lava flow emplacement [Fink and Griffiths, 1990, 1992; Gregg and Fink, 2000]. These experiments established psi (hereafter denoted by Ψ), a dimensionless parameter that relates crust formation and advection timescales of a viscous gravity current. Four primary flow morphologies corresponding to discreet Ψ ranges were observed. Gregg and Fink [2000] also investigated flows on slopes and found that steeper slopes increase the effective effusion rate producing predicted morphologies at lower Ψ values. Additional work is needed to constrain the Ψ parameter space, evaluate the predictive capability of Ψ, and determine if the preserved flow morphology can be used to indicate the initial flow conditions. We performed 514 experiments to address the following controls on lava flow morphology: slope (n = 282), unsteadiness/pulsations (n = 58), slope & unsteadiness/pulsations (n = 174), distal processes, and emplacement vs. post-emplacement morphologies. Our slope experiments reveal a similar trend to Gregg and Fink [2000] with the caveat that very high and very low local & source eruption rates can reduce the apparent predictive capability of Ψ. Predicted Ψ morphologies were often produced halfway through the eruption. Our pulse experiments are expected to produce morphologies unique to each eruption rate and promote tube formation and compound flows. Post-emplacement morphologies are modified by a variety of factors (e.g. solidification, deflation), which may not preserve the initial morphology produced during an eruption. Relating this morphology to the eruption conditions is pertinent to understanding the evolution of planetary surfaces.

Eruptive history of the Ubehebe Crater cluster, Death Valley, California

NASA Astrophysics Data System (ADS)

Fierstein, Judy; Hildreth, Wes

2017-04-01

A sequence of late Holocene eruptions from the Ubehebe Crater cluster in Death Valley was short-lived, emplacing several phreatomagmatic and magmatic deposits. Seven craters form the main group, which erupted along a north-south alignment 1.5 km long. At least five more make a 500-m east-west alignment west of the main crater group. One more is an isolated shallow crater 400 m south of that alignment. All erupted through Miocene fanglomerate and sandstone, which are now distributed as comminuted matrix and lithic clasts in all Ubehebe deposits. Stratigraphic evidence showing that all Ubehebe strata were emplaced within a short time interval includes: (1) deposits from the many Ubehebe vents make a multi-package sequence that conformably drapes paleo-basement topography with no erosive gullying between emplacement units; (2) several crater rims that formed early in the eruptive sequence are draped smoothly by subsequent deposits; and (3) tack-welded to agglutinated spatter and bombs that erupted at various times through the sequence remained hot enough to oxidize the overlying youngest emplacement package. In addition, all deposits sufficiently consolidated to be drilled yield reliable paleomagnetic directions, with site mean directions showing no evidence of geomagnetic secular variation. Chemical analyses of juvenile components representing every eruptive package yield a narrow range in major elements [SiO2 (48.65-50.11); MgO (4.98-6.23); K2O (2.24-2.39)] and trace elements [Rb (28-33); Sr (1513-1588); Zr (373-404)]. Despite lithologic similarities, individual fall units can be traced outward from vent by recording layer thicknesses, maximum scoria and lithic sizes, and juvenile clast textural variations. This permits reconstruction of the eruptive sequence, which produced a variety of eruptive styles. The largest and northernmost of the craters, Ubehebe Crater, is the youngest of the group. Its largely phreatomagmatic deposits drape all of the others, thicken in paleogullies and thin over several newly created crater rims. Evidence in-hand virtually requires that the Ubehebe cluster of craters erupted over a brief time interval, not protracted over centuries.

Assembling an ignimbrite: Compositionally defined eruptive packages in the 1912 Valley of Ten Thousand Smokes ignimbrite, Alaska

USGS Publications Warehouse

Fierstein, J.; Wilson, C.J.N.

2005-01-01

The 1912 Valley of Ten Thousand Smokes (VTTS) ignimbrite was constructed from 9 compositionally distinct, sequentially emplaced packages, each with distinct proportions of rhyolite (R), dacite (D), and andesite (A) pumices that permit us to map package boundaries and flow paths from vent to distal extents. Changing pumice proportions and interbedding relationships link ignimbrite formation to coeval fall deposition during the first ???16 h (Episode I) of the eruption. Pumice compositional proportions in the ignimbrite were estimated by counts on ???100 lapilli at multiple levels in vertical sections wherever accessible and more widely over most of the ignimbrite surface in the VTTS. The initial, 100% rhyolite ignimbrite package (equivalent to regional fall Layer A and occupying ???3.5 h) was followed by packages with increasing proportions of andesite, then dacite, emplaced over ???12.5 h and equivalent to regional fall Layers B1-B3. Coeval fall deposits are locally intercalated with the ignimbrite and show parallel changes in R:D (rhyolite:dacite) proportions, but lack significant amounts of andesite. Andesite was thus dominantly a low-fountaining component in the eruption column and is preferentially represented in packages filling the VTTS north of the vent. The most extensive packages (3 and 4) occur in B1 and early B2 times where flow mobility and volume were optimized; earlier all-rhyolite flows (Package 1) were highly energetic but less voluminous, while later packages (5-9) were both less voluminous and emplaced at lower velocities. Package boundaries are expressed as one or more of the following: sharp color changes corresponding to compositional variations; persistent finer-grained basal parts of flow units; compaction swales filled by later packages; erosional channels cut by the flows that fill them; lobate accumulations of one package; and (mostly south of the vent) intercalated fall deposit layers. Clear flow-unit boundaries are best developed between ignimbrite of non-successive packages, indicating time breaks of tens of minutes to hours. Less well-defined stratification may represent rapidly emplaced successive flow units but often changes over short distances and indicates variations in localized depositional conditions. ?? 2005 Geological Society of America.

Control of Precambrian basement deformation zones on emplacement of the Laramide Boulder batholith and Butte mining district, Montana, United States

USGS Publications Warehouse

Berger, Byron R.; Hildenbrand, Thomas G.; O'Neill, J. Michael

2011-01-01

What are the roles of deep Precambrian basement deformation zones in the localization of subsequent shallow-crustal deformation zones and magmas? The Paleoproterozoic Great Falls tectonic zone and its included Boulder batholith (Montana, United States) provide an opportunity to examine the importance of inherited deformation fabrics in batholith emplacement and the localization of magmatic-hydrothermal mineral deposits. Northeast-trending deformation fabrics predominate in the Great Falls tectonic zone, which formed during the suturing of Paleoproterozoic and Archean cratonic masses approximately 1,800 mega-annum (Ma). Subsequent Mesoproterozoic to Neoproterozoic deformation fabrics trend northwest. Following Paleozoic through Early Cretaceous sedimentation, a Late Cretaceous fold-and-thrust belt with associated strike-slip faulting developed across the region, wherein some Proterozoic faults localized thrust faulting, while others were reactivated as strike-slip faults. The 81- to 76-Ma Boulder batholith was emplaced along the reactivated central Paleoproterozoic suture in the Great Falls tectonic zone. Early-stage Boulder batholith plutons were emplaced concurrent with east-directed thrust faulting and localized primarily by northwest-trending strike-slip and related faults. The late-stage Butte Quartz Monzonite pluton was localized in a northeast-trending pull-apart structure that formed behind the active thrust front and is axially symmetric across the underlying northeast-striking Paleoproterozoic fault zone, interpreted as a crustal suture. The modeling of potential-field geophysical data indicates that pull-apart?stage magmas fed into the structure through two funnel-shaped zones beneath the batholith. Renewed magmatic activity in the southern feeder from 66 to 64 Ma led to the formation of two small porphyry-style copper-molybdenum deposits and ensuing world-class polymetallic copper- and silver-bearing veins in the Butte mining district. Vein orientations parallel joints in the Butte Quartz Monzonite that, in turn, mimic Precambrian deformation fabrics found outside the district. The faults controlling the Butte veins are interpreted to have formed through activation under shear of preexisting northeast-striking joints as master faults from which splay faults formed along generally east-west and northwest joint plane orientations.

Nuées ardentes of 22 November 1994 at Merapi volcano, Java, Indonesia

USGS Publications Warehouse

Abdurachman, E.K.; Bourdier, J.-L.; Voight, B.

2000-01-01

Nuées ardentes associated with dome collapse on 22 November 1994, at Merapi volcano traveled to the south–southwest as far as 6.5 km, and collectively accumulated roughly 2.5–3 million cubic meters of deposits. The damaged area comprises 9.5 km2 and is covered by two nuée ardente facies, a conventional “Merapi-type”, valley-fill block-and-ash flow facies and a pyroclastic surge facies. The proximal deposits reflect the accumulation of dozens of nuées ardentes, with many subsidiary flow units. The distal deposits are more simply organized, as only a few individual events reached to distances >3.5 km. The stratigraphic relationships north of Turgo hill indicate that the surge deposits are a facies of particularly mobile nuées ardentes that also deposited channeled block-and-ash flow facies. They further suggest that the surge facies beyond the channel margins correlate laterally with a finer-grained sublayer locally developed at the base of the block-and-ash flow facies. Eyewitness reports suggest that the emplacement of the block-and-ash flow facies in the distal part of the Boyong river may have followed, by a short time interval, the destruction and deposition of the surge facies at Turgo village. The stratigraphy is in accord with the eyewitness reports. The surge facies was emplaced by a dilute surge current, detached from the same dome-collapse nuée ardente that, as a separate flow unit, subsequently emplaced the distal block-and-ash deposit in the Boyong valley. The detachment occurred at higher elevations, likely at or above the slope break at about 2000 m elevation. This flow separation enabled the surge current to shortcut over the landscape and to emplace its deposit even as the block-and-ash flow continued its tortuous southward movement in the Boyong channel. Dome-collapse nuée ardente activity formed the bulk of the eruption, which was accompanied by virtually no significant vertical summit explosive activity.

Magnetic fabric constraints of the emplacement of igneous intrusions

NASA Astrophysics Data System (ADS)

Maes, Stephanie M.

Fabric analysis is critical to evaluating the history, kinematics, and dynamics of geological deformation. This is particularly true of igneous intrusions, where the development of fabric is used to constrain magmatic flow and emplacement mechanisms. Fabric analysis was applied to three mafic intrusions, with different tectonic and petrogenetic histories, to study emplacement and magma flow: the Insizwa sill (Mesozoic Karoo Large Igneous Province, South Africa), Sonju Lake intrusion (Proterozoic Midcontinent Rift, Minnesota, USA), and Palisades sill (Mesozoic rift basin, New Jersey, USA). Multiple fabric analysis techniques were used to define the fabric in each intrusive body. Using digital image analysis techniques on multiple thin sections, the three-dimensional shape-preferred orientation (SPO) of populations of mineral phases were calculated. Low-field anisotropy of magnetic susceptibility (AMS) measurements were used as a proxy for the mineral fabric of the ferromagnetic phases (e.g., magnetite). In addition, a new technique---high-field AMS---was used to isolate the paramagnetic component of the fabric (e.g., silicate fabric). Each fabric analysis technique was then compared to observable field fabrics as a framework for interpretation. In the Insizwa sill, magnetic properties were used to corroborate vertical petrologic zonation and distinguish sub-units within lithologically defined units. Abrupt variation in magnetic properties provides evidence supporting the formation of the Insizwa sill by separate magma intrusions. Low-field AMS fabrics in the Sonju Lake intrusion exhibit consistent SW-plunging lineations and SW-dipping foliations. These fabric orientations provide evidence that the cumulate layers in the intrusion were deposited in a dynamic environment, and indicate magma flowed from southwest to northeast, parallel to the pre-existing rift structures. In the Palisades sill, the magnetite SPO and low-field AMS lineation have developed orthogonal to the plagioclase SPO and high-field AMS lineation. Magma flow in the Palisades magmatic system is interpreted to have originated from a point source feeder. Low-field AMS records the flow direction, whereas high-field AMS records extension within the igneous sheet. The multiple fabric analysis techniques presented in this dissertation have advanced our understanding of the development of fabric and its relationship to internal structure, emplacement, and magma dynamics in mafic igneous systems.

Fresh Dark Ray Crater

NASA Image and Video Library

2011-10-15

The crater on asteroid Vesta shown in this image from NASA Dawn spacecraft was emplaced onto the ejecta blanket of two large twin craters. Commonly, rays from impact craters are brighter than the surrounding surface.

10 CFR 60.72 - Construction records.

Code of Federal Regulations, 2010 CFR

2010-01-01

... least the following: (1) Surveys of the underground facility excavations, shafts, and boreholes... emplacement, and location of seals used. [48 FR 28222, June 21, 1983, as amended at 53 FR 19251, May 27, 1988] ...

Design of lunar base observatories

NASA Technical Reports Server (NTRS)

Johnson, Stewart W.

1988-01-01

Several recently suggested concepts for conducting astronomy from a lunar base are cited. Then, the process and sequence of events that will be required to design an observatory to be emplaced on the Moon are examined.

SECO containment data report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stubbs, T.; Heinle, R.

1997-06-01

This containment data report for the SECO event provides a description of the event, including the site, emplacement, and instrumentation. Stemming performance is reported, including radiation, pressure, collapse phenomena, and motion. Surface array measurements are provided.

Mars penetrator: Subsurface science mission

NASA Technical Reports Server (NTRS)

Lumpkin, C. K.

1974-01-01

A penetrator system to emplace subsurface science on the planet Mars is described. The need for subsurface science is discussed, and the technologies for achieving successful atmospheric entry, Mars penetration, and data retrieval are presented.

Petrology of Aztec Wash pluton, Eldorado Mountains, southern Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Falkner, C.M.; Miller, C.F.; Wooden, J.L.

1993-04-01

Aztec Wash pluton, a 50 km[sup 2] intrusive complex in the northern Eldorado Mountains, was emplaced ca. 16 Ma (Faulds et al., 1990) during extension within the Colorado River Corridor. The pluton displays extreme compositional variability, ranging from olivine gabbro (ca. 50 wt% SiO[sub 2]) to highly evolved aplite (76% SiO[sub 2]). Most of the intrusion is medium grained, homogeneous granite (ca. 72% SiO[sub 2]), but 1/3 is highly heterogeneous and dominated by mafic to intermediate rocks; a 6 [times] 3km, N-S mafic zone almost bisects the pluton. Well-displayed magma mingling and late mafic and felsic dikes verify the coexistencemore » of mafic and felsic melts. Hornblende barometry indicates that the entire exposed portion of Aztec Wash pluton was emplaced at very shallow depth (« less

Dike/Drift Interactions

DOE Office of Scientific and Technical Information (OSTI.GOV)

E. Gaffiney

2004-11-23

This report presents and documents the model components and analyses that represent potential processes associated with propagation of a magma-filled crack (dike) migrating upward toward the surface, intersection of the dike with repository drifts, flow of magma in the drifts, and post-magma emplacement effects on repository performance. The processes that describe upward migration of a dike and magma flow down the drift are referred to as the dike intrusion submodel. The post-magma emplacement processes are referred to as the post-intrusion submodel. Collectively, these submodels are referred to as a conceptual model for dike/drift interaction. The model components and analyses ofmore » the dike/drift interaction conceptual model provide the technical basis for assessing the potential impacts of an igneous intrusion on repository performance, including those features, events, and processes (FEPs) related to dike/drift interaction (Section 6.1).« less

Datation U_Pb : âge de mise en place du magmatisme bimodal des Jebilet centrales (chaîne Varisque, Maroc). Implications géodynamiquesU_Pb dating: emplacement age of the bimodal magmatism of central Jebilet (Variscan Belt, Morocco). Geodynamic implications

NASA Astrophysics Data System (ADS)

Essaifi, Abderrahim; Potrel, Alain; Capdevila, Ramon; Lagarde, Jean-Louis

2003-01-01

The bimodal magmatism of central Jebilet is dated to 330.5 +0.68-0.83 Ma by UPb dating on zircons. This age, similar to that of the syntectonic Jebilet cordierite-bearing granitoids, corresponds to the age of the local major tectonometamorphic event. The syntectonic plutonism of the Jebilet massif, composed of tholeiitic, alkaline, and peraluminous calc-alkaline series, is variegated. Magmas emplacement was favoured by the local extension induced by the motion along the western boundary of the Carboniferous basins of the Moroccan Meseta. The Jebilet massif exemplifies the activation of various magmas sources during an episode of continental convergence and crustal wrenching.

Geomorphology of crater and basin deposits - Emplacement of the Fra Mauro formation

NASA Technical Reports Server (NTRS)

Morrison, R. H.; Oberbeck, V. R.

1975-01-01

Characteristics of continuous deposits near lunar craters larger than about 1 km wide are considered, and it is concluded that (1) concentric dunes, radial ridges, and braided lineations result from deposition of the collision products of ejecta from adjacent pairs of similarly oriented secondary-crater chains and are, therefore, concentrations of secondary-crater ejecta; (2) intracrater ridges are produced within preexisting craters surrounding a fresh primary crater by ricocheting and focusing of secondary-crater ejecta from the preexisting craters' walls; and (3) secondary cratering has produced many of the structures of the continuous deposits of relatively small lunar craters and is the dominant process for emplacement of most of the radial facies of the continuous deposits of large lunar craters and basins. The percentages of Imbrium ejecta in deposits and the nature of Imbrium sculpturing are investigated.

Method of Remotely Constructing a Room

DOEpatents

Michie, J. D.; De Hart, R. C.

1971-10-05

The testing of nuclear devices of high explosive yield has required that cavities of relatively large size be provided at considerable distances below the surface of the earth for the pre-detonation emplacement of the device. The construction of an essentially watertight chamber or room in the cavity is generally required for the actual emplacement of the device. A method is described of constructing such a room deep within the earth by personnel at the surface. A dual wall bladder of a watertight, pliable fabric material is lowered down a shaft into a selected position. The bladder is filled with a concrete grout while a heavy fluid having essentially the same density as the grout is maintained on both sides of the bladder, to facilitate complete deployment of the bladder by the grout to form a room of desired configuration. (10 claims)

Method of remotely constructing a room

DOEpatents

Michie, J.D.; De Hart, R.C.

1971-10-05

The testing of nuclear devices of high explosive yield has required that cavities of relatively large size be provided at considerable distances below the surface of the earth for the pre-detonation emplacement of the device. The construction of an essentially watertight chamber or room in the cavity is generally required for the actual emplacement of the device. A method is described of constructing such a room deep within the earth by personnel at the surface. A dual wall bladder of a watertight, pliable fabric material is lowered down a shaft into a selected position. The bladder is filled with a concrete grout while a heavy fluid having essentially the same density as the grout is maintained on both sides of the bladder, to facilitate complete deployment of the bladder by the grout to form a room of desired configuration. (10 claims)

Emplacement history of a thrust sheet based on analysis of pressure solution cleavage and deformed fossils

DOE Office of Scientific and Technical Information (OSTI.GOV)

Protzman, G.M.; Mitra, G.

The emplacement history of a thrust sheet is recorded by the strain accumulated in its hanging wall and footwall. Detailed studies of second order structures and analysis of strain due to pressure solution and plastic deformation allow the authors to determine the deformation history of the Meade thrust in the Idaho - Wyoming thrust belt. Emplacement of the Meade thrust was accompanied by the formation of a series of second order in echelon folds in the footwall. Temporal relations based on detailed structural studies show that these folds, which are confined to the Jurassic Twin Creek Formation, formed progressively inmore » front of the advancing Meade thrust and were successively truncated and overridden by footwall imbricates of the Meade thrust. The Twin Creek Formation in both the hanging wall and footwall of the Meade thrust is penetratively deformed, with a well developed pressure solution cleavage. In addition, plastic strain is recorded by deformed Pentacrinus within fossil hash layers in the Twin Creek. Much of this penetrative deformation took place early in the history of the thrust sheet as layer parallel shortening, and the cleavage and deformed fossils behaved passively during subsequent folding and faulting. The later stages of deformation may be sequentially removed through balancing techniques to track successive steps in the deformation. This strain history, which is typical of an internal thrust sheet, is partly controlled by the lithologies involved, timing between successive thrusts, and the amount of interaction between major faults.« less

40Ar/39Ar ages and Sr-Nd-Pb isotopic compositions of alkaline and tholeiitic rocks from the northern Deccan Traps

NASA Astrophysics Data System (ADS)

Marzoli, A.; Parisio, L.; Jourdan, F.; Melluso, L.; Sethna, S. F.; Bellieni, G.

2015-12-01

The Deccan large igneous province in India was emplaced close to the Cretaceous-Paleogene boundary (K-Pg; 66.0 Ma) and is formed by tholeiitic and alkaline rocks. Definition of the origin of Deccan magmatism and of its environmental impact relies on precise and accurate geochronological analyses. We present new 40Ar/39Ar ages from the northern sector of the province. In this area, tholeiitic and alkaline rocks were contemporaneously emplaced at 66.60±0.35 to 65.25±0.29 Ma in the Phenai Mata area, while rocks from Rajpipla and Mt. Pavagadh yielded ages ranging from 66.40±2.80 to 64.90±0.80 Ma. Indistinguishable ages for alkaline and tholeiitic magmatism, coupled with distinct major and trace element and Sr-Nd-Pb isotopic compositions suggest that distinct mantle sources, necessary for the two magmatic series were synchronously active. The new ages are compared with previous ages, which were carefully screened and filtered and then recalculated in order to be comparable. The entire data set of geochronological data does not support a time-related migration of the magmatism related to the northward Indian Plate movement relative to the Reunion mantle plume. The main phase of magmatism, including the newly dated rocks from the Northern Deccan occurred across the K-Pg boundary, confirming a causal link between the emplacement of the province and the K-Pg mass extinction.

Magma emplacement in 3D

NASA Astrophysics Data System (ADS)

Gorczyk, W.; Vogt, K.

2017-12-01

Magma intrusion is a major material transfer process in Earth's continental crust. Yet, the mechanical behavior of the intruding magma and its host are a matter of debate. In this study, we present a series of numerical thermo-mechanical experiments on mafic magma emplacement in 3D.In our model, we place the magmatic source region (40 km diameter) at the base of the mantle lithosphere and connect it to the crust by a 3 km wide channel, which may have evolved at early stages of magmatism during rapid ascent of hot magmatic fluids/melts. Our results demonstrate continental crustal response due to magma intrusion. We observe change in intrusion geometries between dikes, cone-sheets, sills, plutons, ponds, funnels, finger-shaped and stock-like intrusions as well as injection time. The rheology and temperature of the host-rock are the main controlling factors in the transition between these different modes of intrusion. Viscous deformation in the warm and deep crust favours host rock displacement and magma pools along the crust-mantle boundary forming deep-seated plutons or magma ponds in the lower to middle-crust. Brittle deformation in the cool and shallow crust induces cone-shaped fractures in the host rock and enables emplacement of finger- or stock-like intrusions at shallow or intermediate depth. A combination of viscous and brittle deformation forms funnel-shaped intrusions in the middle-crust. Low-density source magma results in T-shaped intrusions in cross-section with magma sheets at the surface.

Simulation of Cooling and Pressure Effects on Inflated Pahoehoe Lava Flows

NASA Technical Reports Server (NTRS)

Glaze, Lori S.; Baloga, Stephen M.

2016-01-01

Pahoehoe lobes are often emplaced by the advance of discrete toes accompanied by inflation of the lobe surface. Many random effects complicate modeling lobe emplacement, such as the location and orientation of toe breakouts, their dimensions, mechanical strength of the crust, micro-topography and a host of other factors. Models that treat the movement of lava parcels as a random walk have explained some of the overall features of emplacement. However, cooling of the surface and internal pressurization of the fluid interior has not been modeled. This work reports lobe simulations that explicitly incorporate 1) cooling of surface lava parcels, 2) the propensity of breakouts to occur at warmer margins that are mechanically weaker than cooler ones, and 3) the influence of internal pressurization associated with inflation. The surface temperature is interpreted as a surrogate for the mechanic strength of the crust at each location and is used to determine the probability of a lava parcel transfer from that location. When only surface temperature is considered, the morphology and dimensions of simulated lobes are indistinguishable from equiprobable simulations. However, inflation within a lobe transmits pressure to all connected fluid locations with the warmer margins being most susceptible to breakouts and expansion. Simulations accounting for internal pressurization feature morphologies and dimensions that are dramatically different from the equiprobable and temperature-dependent models. Even on flat subsurfaces the pressure-dependent model produces elongate lobes with distinct directionality. Observables such as topographic profiles, aspect ratios, and maximum extents should be readily distinguishable in the field.

21. Interior, view of shot corridor looking from the south ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. Interior, view of shot corridor looking from the south to illustrate struyctural failure and a 15" shift - Fort Point, Gun Emplacement Number 1, 25 Wentworth Road, New Castle, Rockingham County, NH

Landsat investigations of the northern Paradox basin, Utah and Colorado: implications for radioactive waste emplacement

USGS Publications Warehouse

Friedman, Jules D.; Simpson, Shirley L.

1978-01-01

The first stages of a remote-sensing project on the Paradox basin, part of the USGS (U.S. Geological Survey) radioactive waste-emplacement program, consisted of a review and selection of the best available satellite scanner images to use in geomorphologic and tectonic investigations of the region. High-quality Landsat images in several spectral bands (E-2260-17124 and E-5165-17030), taken under low sun angle October 9 and 10, 1975, were processed via computer for planimetric rectification, histogram analysis, linear transformation of radiance values, and edge enhancement. A lineament map of the northern Paradox basin was subsequently compiled at 1:400,000 using the enhanced Landsat base. Numerous previously unmapped northeast-trending lineaments between the Green River and Yellowcat dome; confirmatory detail on the structural control of major segments of the Colorado, Gunnison, and Dolores Rivers; and new evidence for late Phanerozoic reactivation of Precambrian basement structures are among the new contributions to the tectonics of the region. Lineament trends appear to be compatible with the postulated Colorado lineament zone, with geophysical potential-field anomalies, and with a northeast-trending basement fault pattern. Combined Landsat, geologic, and geophysical field evidence for this interpretation includes the sinuousity of the composite Salt Valley anticline, the transection of the Moab-Spanish Valley anticline on its southeastern end by northeast-striking faults, and possible transection (?) of the Moab diapir. Similarly, northeast-trending lineaments in Cottonwood Canyon and elsewhere are interpreted as manifestations of structures associated with northeasterly trends in the magnetic and gravity fields of the La Sal Mountains region. Other long northwesterly lineaments near the western termination of the Ryan Creek fault zone. may be associated with the fault zone separating the Uncompahgre horst uplift from the Paradox basin. Implications of the present investigation for a potential radioactive waste-emplacement site in Salt Valley include confirmation of lack of permanent surface drainage and absence of agricultural or other development in the area of northern Salt Valley. On the other hand, the existence of diapirism, salt-karst landforms, and extensive lineamentation of the northern Paradox basin suggest regional tectonic instability at least in the geologic past. Future reactivation of diapiric or other halokinetic processes, including lateral flow, would lead to plastic behavior of the halite that might cause emplaced waste containers to migrate within the diapir. At Salt Valley, existing diapiric boundary faults and intersecting joint sets in sandstone units on the anticlinal flanks could, if the hydraulic gradient is suitable, provide conduits to the halite core for circulating ground water from adjacent Mesozoic sandstones in synclinal areas between the salt diapirs. Moreover, the loci of major lineament intersections might be areas of somewhat elevated seismic risk. If the salt barrier of Salt Valley anticline should fail in the future, potentially water-bearing Mesozoic fissile shales and friable to quartizitic sandstones would be the ultimate repository of the emplaced radioactive waste.

Geochemical, mineralogical, and volcanological constraints on the petrogenesis of komatiites

NASA Astrophysics Data System (ADS)

Lesher, C. M.

2003-04-01

Komatiites are ultramafic volcanic rocks that occur primarily in Archean greenstone belts and that are inferred to have had very high liquidus temperatures (1640-1360oC), a very large interval between the liquidus and solidus (460-180oC), very low viscosities (0.1-1.0 Pa s), high densities (2800-2700 g m-3), and high specific heats (1800-1700 J kg-1 oC-1). Because of these unusual geochemical, thermal, and physical characteristics they are interpreted to have erupted very rapidly and superheated, formed very voluminous and very mobile flows that may have traveled great distances from their eruptive sites, become channelized within seafloor depressions, and cooled and solidified slowly. Depending on the degree of channelization, they may have also thermomechanically eroded wall rocks and/or substrates. As such, they provide critical information regarding the composition and structure of the Archean mantle and the nature of volcanism on the young Earth. The high MgO contents (up to 30%) of least-altered aphyric and fine random spinifex-textured komatiites and the high Fo contents (up to 94) of relict igneous olivines require derivation from a mantle source. Very low abundances of HILE relative to MILE and positive eNd values in most komatiites worldwide indicate derivation from depleted sources. Although it has been suggested that komatiites were water-rich (up to 4%) and were generated by hydrous melting, this is inconsistent with the lack of enrichment of HILE in most komatiites, suggesting that the rare komatiites that do contain igneous amphibole or abundant vesicles incorporated water during emplacement. Low abundances of MILE in most komatiites suggest moderate to high degrees of partial melting, depending on the composition of the source and the degree of prior melt extraction. Individual komatiite sequences commonly grade upwards from massive or differentiated cumulate units derived from high-Mg komatiites to massive or differentiated non-cumulate units derived from low-Mg komatiites, suggesting that the lava pile evolved by fractional crystallization during emplacement in a regressive lava flow field. Crustal contamination occurred on large scales during ascent through the crust, typically in the late stages of eruptive cycles, or on very localized scales during emplacement, typically in the early stages of eruptive cycles. Although crystallization of spinifex zones and accumulation of olivine has been proposed to have occurred during inflation, textural, mineralogical, whole-rock geochemical, and mineral chemical variations indicate that inflation must have occurred early, that the excess olivine in the cumulate zones crystallized during emplacement, and that the spinifex zones crystallized after the flows ponded. Because of their unique thermal and physical characteristics and propensity to fractionate and crystallize olivine ± chromite and to assimilate country rocks, the emplacement and crystallization history of komatiites must be carefully evaluated prior to making any inferences about magma generation processes.

From a long-lived upper-crustal magma chamber to rapid porphyry copper emplacement: Reading the geochemistry of zircon crystals at Bajo de la Alumbrera (NW Argentina)

NASA Astrophysics Data System (ADS)

Buret, Yannick; von Quadt, Albrecht; Heinrich, Christoph; Selby, David; Wälle, Markus; Peytcheva, Irena

2016-09-01

The formation of world class porphyry copper deposits reflect magmatic processes that take place in a deeper and much larger underlying magmatic system, which provides the source of porphyry magmas, as well as metal and sulphur-charged mineralising fluids. Reading the geochemical record of this large magmatic source region, as well as constraining the time-scales for creating a much smaller porphyry copper deposit, are critical in order to fully understand and quantify the processes that lead to metal concentration within these valuable mineral deposits. This study focuses on the Bajo de la Alumbrera porphyry copper deposit in Northwest Argentina. The deposit is centred on a dacitic porphyry intrusive stock that was mineralised by several pulses of porphyry magma emplacement and hydrothermal fluid injections. To constrain the duration of ore formation, we dated zircons from four porphyry intrusions, including pre-, syn- and post-mineralisation porphyries based on intersection relations between successive intrusion and vein generations, using high precision CA-ID-TIMS. Based on the youngest assemblages of zircon grains, which overlap within analytical error, all four intrusions were emplaced within 29 ka, which places an upper limit on the total duration of hydrothermal mineralisation. Re/Os dating of hydrothermal molybdenite fully overlaps with this high-precision age bracket. However, all four porphyries contain zircon antecrysts which record protracted zircon crystallisation during the ∼200 ka preceding the emplacement of the porphyries. Zircon trace element variations, Ti-in-zircon temperatures, and Hf isotopic compositions indicate that the four porphyry magmas record a common geochemical and thermal history, and that the four intrusions were derived from the same upper-crustal magma chamber. Trace element zoning within single zircon crystals confirms a fractional crystallisation trend dominated by titanite and apatite crystallisation. However, zircon cathodoluminescence imaging reveals the presence of intermediate low luminescent (dark) growth zones in many crystals from all intrusions, characterised by anomalously high Th, U and REE concentrations and transient excursions in trace element ratios. A return to the same fractionation trend after this excursion excludes external compositional forcing such as magma mixing. Instead we interpret the ;dark-zones; to record zircon crystallisation during a transient event of rapid growth that resulted from mafic magma injection into the base of the magma chamber, releasing a CO2-rich vapour phase into the dacitic crystal mush. We propose that this vapour phase then migrated upwards to the apical part of the magma chamber from where it was expelled, together with successive batches of magma, to form the porphyry copper deposit within a short time-span of less than a few 10,000 years. The short duration of host rock emplacement, hydrothermal alteration and mineralisation presented in this study provides critical constraints on fluid storage in magma chambers and the genesis of large porphyry copper deposits.

Statistical Distribution of Inflation on Lava Flows: Analysis of Flow Surfaces on Earth and Mars

NASA Technical Reports Server (NTRS)

Glazel, L. S.; Anderson, S. W.; Stofan, E. R.; Baloga, S.

2003-01-01

The surface morphology of a lava flow results from processes that take place during the emplacement of the flow. Certain types of features, such as tumuli, lava rises and lava rise pits, are indicators of flow inflation or endogenous growth of a lava flow. Tumuli in particular have been identified as possible indicators of tube location, indicating that their distribution on the surface of a lava flow is a junction of the internal pathways of lava present during flow emplacement. However, the distribution of tumuli on lava flows has not been examined in a statistically thorough manner. In order to more rigorously examine the distribution of tumuli on a lava flow, we examined a discrete flow lobe with numerous lava rises and tumuli on the 1969 - 1974 Mauna Ulu flow at Kilauea, Hawaii. The lobe is located in the distal portion of the flow below Holei Pali, which is characterized by hummocky pahoehoe flows emplaced from tubes. We chose this flow due to its discrete nature allowing complete mapping of surface morphologies, well-defined boundaries, well-constrained emplacement parameters, and known flow thicknesses. In addition, tube locations for this Mauna Ulu flow were mapped by Holcomb (1976) during flow emplacement. We also examine the distribution of tumuli on the distal portion of the hummocky Thrainsskjoldur flow field provided by Rossi and Gudmundsson (1996). Analysis of the Mauna Ulu and Thrainsskjoldur flow lobes and the availability of high-resolution MOC images motivated us to look for possible tumuli-dominated flow lobes on the surface of Mars. We identified a MOC image of a lava flow south of Elysium Mons with features morphologically similar to tumuli. The flow is characterized by raised elliptical to circular mounds, some with axial cracks, that are similar in size to the tumuli measured on Earth. One potential avenue of determining whether they are tumuli is to look at the spatial distribution to see if any patterns similar to those of tumuli-dominated terrestrial flows can be identified. Since tumuli form by the injection of lava beneath a crust, the distribution of tumuli on a flow should represent the distribution of thermally preferred pathways beneath the surface of the crust. That distribution of thermally preferred pathways may be a function of the evolution of a basaltic lava flow. As a longer-lived flow evolves, initially broad thermally preferred pathways would evolve to narrower, more well-defined tube-like pathways. The final flow morphology clearly preserves the growth of the flow over time, with inflation features indicating pathways that were not necessarily contemporaneously active. Here, we test using statistical analysis whether this final flow morphology produces distinct distributions that can be used to readily determine the distribution of thermally preferred pathways beneath the surface of the crust.

Flooded Crater in Terra Sirenum

NASA Image and Video Library

2003-03-22

The floor of the crater in this NASA Mars Odyssey image displays interesting textures and it appears to have been flooded by some type of material. It is unclear if this material was fluvially emplaced mud hyperconcentrated flows or lava.

Flood-Emplaced Blocks in Holden Crater

NASA Image and Video Library

2010-10-21

This image from NASA Mars Reconnaissance Orbiter shows blocks of bright, layered rock embedded in darker material that are thought to have been deposited by a giant flood that occurred when Uzboi Valles breached the rim of Holden Crater.

Admixture enhanced controlled low-strength material for direct underwater injection with minimal cross-contamination

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hepworth, H.K.; Davidson, J.S.; Hooyman, J.L.

1997-03-01

Commercially available admixtures have been developed for placing traditional concrete products under water. This paper evaluates adapting anti-washout admixture (AWA) and high range water reducing admixture (HRWRA) products to enhance controlled low-strength materials (CLSMs) for underwater placement. A simple experimental scale model (based on dynamic and geometric similitude) of typical grout pump emplacement equipment has been developed to determine the percentage of cementing material washed out. The objective of this study was to identify proportions of admixtures and underwater CLSM emplacement procedures which would minimize the cross-contamination of the displaced water while maintaining the advantages of CLSM. Since the displacedmore » water from radioactively contaminated systems must be subsequently treated prior to release to the environment, the amount of cross-contamination is important for cases in which cementing material could form hard sludges in a water treatment facility and contaminate the in-place CLSM stabilization medium.« less

The internal structure of lava flows—insights from AMS measurements II: Hawaiian pahoehoe, toothpaste lava and 'a'ā

NASA Astrophysics Data System (ADS)

Cañón-Tapia, Edgardo; Walker, George P. L.; Herrero-Bervera, Emilio

1997-03-01

We studied the anisotropy of magnetic susceptibility (AMS) of 22 basaltic flow units, including S-type pahoehoe, P-type pahoehoe, toothpaste lava and 'a'ā emplaced over different slopes in two Hawaiian islands. Systematic differences occur in several aspects of AMS (mean susceptibility, degree of anisotropy, magnetic fabric and orientation of the principal susceptibilities) among the morphological types that can be related to different modes of lava emplacement. AMS also detects systematic changes in the rate of shear with position in a unit, allowing us to infer local flow direction and some other aspects of the velocity field of each unit. 'A'ā flows are subject to stronger deformation than pahoehoe, and also their internal parts behave more like a unit. According to AMS, the central part of pahoehoe commonly reveals a different deformation history than the upper and lower extremes, probably resulting from endogenous growth.

Patterns and processes: Subaerial lava flow morphologies: A review

NASA Astrophysics Data System (ADS)

Gregg, Tracy K. P.

2017-08-01

Most lava flows have been emplaced away from the watchful eyes of volcanologists, so there is a desire to use solidified lava-flow morphologies to reveal important information about the eruption that formed them. Our current understanding of the relationship between solidified basaltic lava morphology and the responsible eruption and emplacement processes is based on decades of fieldwork, laboratory analyses and simulations, and computer models. These studies have vastly improved our understanding of the complex interactions between the solids, liquids, and gases that comprise cooling lava flows. However, the complex interactions (at millimeter and sub-millimeter scales) between the temperature-dependent abundances of the distinct phases that comprise a lava flow and the final morphology remain challenging to model and to predict. Similarly, the complex behavior of an active pahoehoe flow, although almost ubiquitous on Earth, remains difficult to quantitatively model and precisely predict.

Remote sensing studies of the terrain northwest of Humorum basin

NASA Technical Reports Server (NTRS)

Hawke, B. R.; Peterson, Chris A.; Lucey, Paul G.; Taylor, G. J.; Blewett, David T.; Campbell, Bruce A.; Coombs, Cassandra R.; Spudis, Paul D.

1993-01-01

We have used near-infrared reflectance spectra and Earth-based radar data to investigate the composition and origin of the various geologic units northwest of Humorum basin as well as the stratigraphy of the Humorum preimpact target site. The results of our spectral analysis indicate that at least a portion of the inner, mare-bounding ring is composed of pure anorthosite. Other highlands units in the region are dominated by noritic anorthosite. The anorthosites on the inner ring may have been derived from a layer of anorthosite that exists at depth beneath a more pyroxene-rich unit. Both Gassendi G and F craters expose mare material from beneath a highlands-rich surface unit that was emplaced as a result of the Letronne, Gassendi, and other impact events. This ancient basalt unit was emplaced after the formation of Humorum basin but prior to the Orientale impact.

Ardnamurchan 3D cone-sheet architecture explained by a single elongate magma chamber

PubMed Central

Burchardt, Steffi; Troll, Valentin R.; Mathieu, Lucie; Emeleus, Henry C.; Donaldson, Colin H.

2013-01-01

The Palaeogene Ardnamurchan central igneous complex, NW Scotland, was a defining place for the development of the classic concepts of cone-sheet and ring-dyke emplacement and has thus fundamentally influenced our thinking on subvolcanic structures. We have used the available structural information on Ardnamurchan to project the underlying three-dimensional (3D) cone-sheet structure. Here we show that a single elongate magma chamber likely acted as the source of the cone-sheet swarm(s) instead of the traditionally accepted model of three successive centres. This proposal is supported by the ridge-like morphology of the Ardnamurchan volcano and is consistent with the depth and elongation of the gravity anomaly underlying the peninsula. Our model challenges the traditional model of cone-sheet emplacement at Ardnamurchan that involves successive but independent centres in favour of a more dynamical one that involves a single, but elongate and progressively evolving magma chamber system. PMID:24100542

Ordovician magmatism in the Lévézou massif (French Massif Central): tectonic and geodynamic implications

NASA Astrophysics Data System (ADS)

Lotout, Caroline; Pitra, Pavel; Poujol, Marc; Van Den Driessche, Jean

2017-03-01

New U-Pb dating on zircon yielded ca. 470 Ma ages for the granitoids from the Lévézou massif in the southern French Massif Central. These new ages do not support the previous interpretation of these granitoids as syn-tectonic intrusions emplaced during the Late Devonian-Early Carboniferous thrusting. The geochemical and isotopic nature of this magmatism is linked to a major magmatic Ordovician event recorded throughout the European Variscan belt and related to extreme thinning of continental margins during a rifting event or a back-arc extension. The comparable isotopic signatures of these granitoids on each side of the eclogite-bearing leptyno-amphibolitic complex in the Lévézou massif, together with the fact that they were emplaced at the same time, strongly suggest that these granitoids were originally part of a single unit, tectonically duplicated by either isoclinal folding or thrusting during the Variscan tectonics.

Ardnamurchan 3D cone-sheet architecture explained by a single elongate magma chamber.

PubMed

Burchardt, Steffi; Troll, Valentin R; Mathieu, Lucie; Emeleus, Henry C; Donaldson, Colin H

2013-10-08

The Palaeogene Ardnamurchan central igneous complex, NW Scotland, was a defining place for the development of the classic concepts of cone-sheet and ring-dyke emplacement and has thus fundamentally influenced our thinking on subvolcanic structures. We have used the available structural information on Ardnamurchan to project the underlying three-dimensional (3D) cone-sheet structure. Here we show that a single elongate magma chamber likely acted as the source of the cone-sheet swarm(s) instead of the traditionally accepted model of three successive centres. This proposal is supported by the ridge-like morphology of the Ardnamurchan volcano and is consistent with the depth and elongation of the gravity anomaly underlying the peninsula. Our model challenges the traditional model of cone-sheet emplacement at Ardnamurchan that involves successive but independent centres in favour of a more dynamical one that involves a single, but elongate and progressively evolving magma chamber system.

Relating stress models of magma emplacement to volcano-tectonic earthquakes

NASA Astrophysics Data System (ADS)

Vargas-Bracamontes, D.; Neuberg, J.

2007-12-01

Among the various types of seismic signals linked to volcanic processes, volcano-tectonic earthquakes are probably the earliest precursors of volcanic eruptions. Understanding their relationship with magma emplacement can provide insight into the mechanisms of magma transport at depth and assist in the ultimate goal of forecasting eruptions. Volcano-tectonic events have been observed to occur on faults that experience increases in Coulomb stress changes as the result of magma intrusions. To simulate stress changes associated with magmatic injections, we test different models of volcanic sources in an elastic half-space. For each source model, we look at several aspects that influence the stress conditions of the magmatic system such as the regional tectonic setting, the effect of varying the elastic parameters of the media, the evolution of the magma with time, as well as the volume and rheology of the ascending magma.

The geology of Pine and Crater Buttes: Two basaltic constructs on the far eastern Snake River Plain

NASA Technical Reports Server (NTRS)

Mazierski, Paul F.; King, John S.

1987-01-01

The emplacement history and petrochemical evolution of the volcanics associated with Pine Butte, Crater Butte, and other nearby vents are developed and described. Four major vents were identified in the study area and their associated eruptive products were mapped. All of the vents show a marked physical elongation or linear orientation coincident with the observed rift set. Planetary exploration has revealed the importance of volcanic processes in the genesis and modification of extraterrestrial surfaces. Interpretation of surface features has identified plains-type basaltic volcanism in various mare regions of the Moon and the volcanic provinces of Mars. Identification of these areas with features that appear analogous to those observed in the Pine Butte area suggests similar styles of eruption and mode of emplacement. Such terrestrial analogies serve as a method to interpret the evolution of volcanic planetary surfaces on the inner planets.

Field Measurements of the 1983 Royal Gardens Lava Flows, Kilauea Volcano, and 1984 Mauna Loa Lava Flow, Hawaii

NASA Technical Reports Server (NTRS)

Fink, J.; Zimbelman, J.

1985-01-01

Theoretical models used in the remote determination of lava flow rheology and compositions rely on estimates of such geometric and flow parameters as volume flow rates, levee heights, and channel dimensions, as well as morphologic and structural patterns on the flow surfaces. Quantitative measures of these variables are difficult to obtain, even under optimum conditions. Detailed topographic profiles across several Hawaiian lava flows that were carefully monitored by the U.S. Geological Survey during their emplacement in 1983 were surveyed in order to test various flow emplacement models. Twenty two accurate channel cross sections were constructed by combining these profiles with digitized pre-flow topographic measurements. Levee heights, shear zone widths, and flow depths could then be read directly from the cross sections and input into the models. The profiles were also compared with ones constructed for some Martian lava flows.

Tectonic lineaments in the cenozoic volcanics of southern Guatemala: Evidence for a broad continental plate boundary zone

NASA Technical Reports Server (NTRS)

Baltuck, M.; Dixon, T. H.

1984-01-01

The northern Caribbean plate boundary has been undergoing left lateral strike slip motion since middle Tertiary time. The western part of the boundary occurs in a complex tectonic zone in the continental crust of Guatemala and southernmost Mexico, along the Chixoy-Polochic, Motogua and possibly Jocotan-Chamelecon faults. Prominent lineaments visible in radar imagery in the Neogene volcanic belt of southern Guatemala and western El Salvador were mapped and interpreted to suggest southwest extensions of this already broad plate boundary zone. Because these extensions can be traced beneath Quaternary volcanic cover, it is thought that this newly mapped fault zone is active and is accommodating some of the strain related to motion between the North American and Caribbean plates. Onshore exposures of the Motoqua-Polochic fault systems are characterized by abundant, tectonically emplaced ultramafic rocks. A similar mode of emplacement for these off shore ultramafics, is suggested.

STARR: shortwave-targeted agile Raman robot for the detection and identification of emplaced explosives

NASA Astrophysics Data System (ADS)

Gomer, Nathaniel R.; Gardner, Charles W.

2014-05-01

In order to combat the threat of emplaced explosives (land mines, etc.), ChemImage Sensor Systems (CISS) has developed a multi-sensor, robot mounted sensor capable of identification and confirmation of potential threats. The system, known as STARR (Shortwave-infrared Targeted Agile Raman Robot), utilizes shortwave infrared spectroscopy for the identification of potential threats, combined with a visible short-range standoff Raman hyperspectral imaging (HSI) system for material confirmation. The entire system is mounted onto a Talon UGV (Unmanned Ground Vehicle), giving the sensor an increased area search rate and reducing the risk of injury to the operator. The Raman HSI system utilizes a fiber array spectral translator (FAST) for the acquisition of high quality Raman chemical images, allowing for increased sensitivity and improved specificity. An overview of the design and operation of the system will be presented, along with initial detection results of the fusion sensor.

Shear zones bounding the central zone of the Limpopo Mobile Belt, southern Africa

NASA Astrophysics Data System (ADS)

McCouri, Stephen; Vearncombe, Julian R.

Contrary to previously suggested north-directed thrust emplacement of the central zone of the Limpopo mobile belt, we present evidence indicating west-directed emplacement. The central zone differs from the marginal zones in rock types, structural style and isotopic signature and is an allochthonous thrust sheet. It is bounded in the north by the dextral Tuli-Sabi shear zone and in the south by the sinistral Palala shear zone which are crustal-scale lateral ramps. Published gravity data suggest that the lateral ramps are linked at depth and they probably link at the surface, in a convex westward frontal ramp, in the vicinity of longitude 26°30'E in eastern Botswana. Two phases of movement, the first between 2.7 and 2.6 Ga and the second between 2.0 and 1.8 Ga. occurred on both the Tuli-Sabi and the Palala shear zones.

Sulfur volcanoes on Io?

NASA Astrophysics Data System (ADS)

Greeley, R.; Fink, J.

1985-04-01

The unusual rheological properties of molten sulfur, in which viscosity decreases approximately four orders of magnitude as it cools from 170 to 120 C, may result in distinctive volcanic flow morphologies that allow sulfur flows and volcanoes to be identified on Io. Search of high resolution Voyager images reveals three features--Atar Patera, Daedalus Patera, and Kibero Patera--considered to be possible sulfur volcanoes based on their morphology. All three average 250 km in diameter and are distinguished by circular-to-oval central masses surrounded by irregular, widespread flows. Geometric relations indicate that the flows were emplaced after the central zone and appear to have emanated from their margins. The central zones are interpreted to be domes representing the high temperature stage of sulfur formed initially upon eruption. Rapid quenching formed a crust which preserved this phase of the emplacement. Upon cooling to 170 C, the sulfur reached a low viscosity runny stage and was released as the thin, widespread flows.

Galileo at Io: results from high-resolution imaging.

PubMed

McEwen, A S; Belton, M J; Breneman, H H; Fagents, S A; Geissler, P; Greeley, R; Head, J W; Hoppa, G; Jaeger, W L; Johnson, T V; Keszthelyi, L; Klaasen, K P; Lopes-Gautier, R; Magee, K P; Milazzo, M P; Moore, J M; Pappalardo, R T; Phillips, C B; Radebaugh, J; Schubert, G; Schuster, P; Simonelli, D P; Sullivan, R; Thomas, P C; Turtle, E P; Williams, D A

2000-05-19

During late 1999/early 2000, the solid state imaging experiment on the Galileo spacecraft returned more than 100 high-resolution (5 to 500 meters per pixel) images of volcanically active Io. We observed an active lava lake, an active curtain of lava, active lava flows, calderas, mountains, plateaus, and plains. Several of the sulfur dioxide-rich plumes are erupting from distal flows, rather than from the source of silicate lava (caldera or fissure, often with red pyroclastic deposits). Most of the active flows in equatorial regions are being emplaced slowly beneath insulated crust, but rapidly emplaced channelized flows are also found at all latitudes. There is no evidence for high-viscosity lava, but some bright flows may consist of sulfur rather than mafic silicates. The mountains, plateaus, and calderas are strongly influenced by tectonics and gravitational collapse. Sapping channels and scarps suggest that many portions of the upper approximately 1 kilometer are rich in volatiles.

Men's re-placement: Social practices in a Men's Shed.

PubMed

Anstiss, David; Hodgetts, Darrin; Stolte, Ottilie

2018-05-06

Transitions into retirement can be difficult at the best of times. Many men find themselves having to reflect on who they are and what their lives are about. Their access to social supports and material resources are often disrupted. Men's Sheds offer a space where retired men can actively pursue wellbeing, and respond to disruption and loneliness through emplaced community practices. This paper draws on ethnographic research in a Men's Shed in Auckland, New Zealand in order to explore the social practices through which men create a shared space for themselves in which they can engage in meaningful relationships with each other. We document how participants work in concert to create a space in which they can be together through collective labour. Their emplacement in the shed affords opportunities for supported transitions into retirement and for engaging healthy lives beyond paid employment. Copyright © 2018 Elsevier Ltd. All rights reserved.

Near-field transport of {sup 129}I from a point source in an in-room disposal vault

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kolar, M.; Leneveu, D.M.; Johnson, L.H.

1995-12-31

A very small number of disposal containers of heat generating nuclear waste may have initial manufacturing defects that would lead to pin-hole type failures at the time of or shortly after emplacement. For sufficiently long-lived containers, only the initial defects need to be considered in modeling of release rates from the disposal vault. Two approaches to modeling of near-field mass transport from a single point source within a disposal room have been compared: the finite-element code MOTIF (A Model Of Transport In Fractured/porous media) and a boundary integral method (BIM). These two approaches were found to give identical results formore » a simplified model of the disposal room without groundwater flow. MOTIF has then been used to study the effects of groundwater flow on the mass transport out of the emplacement room.« less

Mass movements on Venus - Preliminary results from Magellan cycle 1 observations

NASA Technical Reports Server (NTRS)

Malin, Michael C.

1992-01-01

A preliminary assessment of mass movements and their geomorphic characteristics as determined from visual inspection of Magellan cycle 1 synthetic aperture radar images is described. The primary data set was a catalog of over 200 ten-inch square photographic prints of full-resolution mosaic image data records. Venus exhibits unambiguous evidence of mass movements at a variety of scales. Mass movements appear mostly in the form of block and rock movements; there is little evidence of regolith and sediment movements. Unique Venusian conditions may play a role in the creation of some mass movement features. Dark (smooth) surfaces surrounding many rockslide avalanches are probably fine materials emplaced as part of the mass movement process, as airfall, surface-hugging density flows, or coarse-depleted debris flows. The size and efficiency of emplacement of landslide deposits on Venus are comparable to those seen on Mars, which in turn generally resemble terrestrial occurrences.

Sulfur Volcanoes on Io?

NASA Technical Reports Server (NTRS)

Greeley, R.; Fink, J.

1985-01-01

The unusual rheological properties of molten sulfur, in which viscosity decreases approximately four orders of magnitude as it cools from 170 to 120 C, may result in distinctive volcanic flow morphologies that allow sulfur flows and volcanoes to be identified on Io. Search of high resolution Voyager images reveals three features--Atar Patera, Daedalus Patera, and Kibero Patera--considered to be possible sulfur volcanoes based on their morphology. All three average 250 km in diameter and are distinguished by circular-to-oval central masses surrounded by irregular, widespread flows. Geometric relations indicate that the flows were emplaced after the central zone and appear to have emanated from their margins. The central zones are interpreted to be domes representing the high temperature stage of sulfur formed initially upon eruption. Rapid quenching formed a crust which preserved this phase of the emplacement. Upon cooling to 170 C, the sulfur reached a low viscosity runny stage and was released as the thin, widespread flows.

An AMS study of the Takidani pluton (Japan)

NASA Astrophysics Data System (ADS)

Hartung, Eva; Caricchi, Luca; Floess, David; Wallis, Simon; Harayama, Satoru

2016-04-01

Large plutonic bodies are typically constructed incrementally often by under-accretion of distinct successive magma pulses. Petrography and geochemistry of the Takidani Pluton (1.54 Ma ± 0.23 Ma) in the Northern Japanese Alps show that the chemical and textural variability observed at the roof of this intrusion is best explained by the segregation of residual melt from a crystallising magma body. We carried out a magnetic susceptibility survey (bulk susceptibility and anisotropy of magnetic susceptibility) to identify the structures associated with the emplacement and extraction of residual melts from a magmatic mush. Additionally, we determined shape preferred orientations (SPO) of amphibole at several locations within the Takidani pluton. From bottom to top of the intrusion, the bulk susceptibility is about constant in the main granodioritic part, decreases roofwards within the porphyritic unit, before increasing again within the marginal granodiorite close to the contact with the overlaying Hotaka Andesite. Such variability mimics the major and trace elements compositional variability measured in the whole rock samples. Magnetic foliations are observed at the western tectonic contact of the pluton potentially indicating overprint, while most other magnetic fabrics across the pluton are characterised by triaxial ellipsoids of magnetic susceptibility or magnetic lineations. Our preliminary data and the lack of internal contacts indicate that Takidani Pluton was likely emplaced as a series of successive magma pulses finally merging to produce a large connected magma body. While amphibole foliations may likely be the results of super-solidus tectonic overprint, anisotropy of magnetic susceptibility data may be related to post-emplacement melt segregation.

The evolution of the early Martian climate and the initial emplacement of crustal H2O

NASA Technical Reports Server (NTRS)

Clifford, S. M.

1993-01-01

Given the geomorphic evidence for the widespread occurrence of water and ice in the early Martian crust, and the difficulty involved in accounting for this distribution given the present climate, it has been suggested that the planet's early climate was originally more Earth-like, permitting the global emplacement of crustal H2O by direct precipitation as snow or rain. The resemblance of the Martian valley networks to terrestrial runoff channels and their almost exclusive occurrence in the planet's ancient (approximately 4-b.y.-old) heavily cratered terrain are often cited as evidence of just such a period. An alternative school of thought suggests that the early climate did not differ substantially from that of today. Advocates of this view find no compelling reason to invoke a warmer, wetter period to explain the origin of the valley networks. Rather, they cite evidence that the primary mechanism of valley formation was groundwater sapping, a process that does not require that surface water exists in equilibrium with the atmosphere. However, while sapping may successfully explain the origin of the small valleys, it fails to address how the crust was initially charged with ice as the climate evolved towards its present state. Therefore, given the uncertainty regarding the environmental conditions that prevailed on early Mars, the initial emplacement of ground ice is considered here from two perspectives: (1) the early climate started warm and wet, but gradually cooled with time, and (2) the early climate never differed substantially from that of today.

Forced transport of thermal energy in magmatic and phreatomagmatic large volume ignimbrites: Paleomagnetic evidence from the Colli Albani volcano, Italy

NASA Astrophysics Data System (ADS)

Trolese, Matteo; Giordano, Guido; Cifelli, Francesca; Winkler, Aldo; Mattei, Massimo

2017-11-01

Few studies have detailed the thermal architecture of large-volume pyroclastic density current deposits, although such work has a clear importance for understanding the dynamics of eruptions of this magnitude. Here we examine the temperature of emplacement of large-volume caldera-forming ignimbrites related to magmatic and phreatomagmatic eruptions at the Colli Albani volcano, Italy, by using thermal remanent magnetization analysis on both lithic and juvenile clasts. Results show that all the magmatic ignimbrites were deposited at high temperature, between the maximum blocking temperature of the magnetic carrier (600-630 °C) and the glass transition temperature (about 710 °C). Temperature estimations for the phreatomagmatic ignimbrite range between 200 and 400 °C, with most of the clasts emplaced between 200 and 320 °C. Because all the investigated ignimbrites, magmatic and phreatomagmatic, share similar magma composition, volume and mobility, we attribute the temperature difference to magma-water interaction, highlighting its pronounced impact on thermal dissipation, even in large-volume eruptions. The homogeneity of the deposit temperature of each ignimbrite across its areal extent, which is maintained across topographic barriers, suggests that these systems are thermodynamically isolated from the external environment for several tens of kilometers. Based on these findings, we propose that these large-volume ignimbrites are dominated by the mass flux, which forces the lateral transport of mass, momentum, and thermal energy for distances up to tens of kilometers away from the vent. We conclude that spatial variation of the emplacement temperature can be used as a proxy for determining the degree of forced-convection flow.

Contribution of Anisotropy of Magnetic Susceptibility (AMS) to reconstruct flooding characteristics of a 4220 BP tsunami from a thick unconsolidated structureless deposit (Banda Aceh, Sumatra)

NASA Astrophysics Data System (ADS)

Wassmer, Patrick; Gomez, Christopher; Iskandasyah, T. Yan W. M.; Lavigne, Franck; Sartohadi, Junun

2015-07-01

One of the main concerns of deciphering tsunami sedimentary records along seashore is to link the emplaced layers with marine high energy events. Based on a combination of morphologic features, sedimentary figures, grain size characteristics, fossils content, microfossils assemblages, geochemical elements, heavy minerals presence; it is, in principle, possible to relate the sedimentary record to a tsunami event. However, experience shows that sometimes, in reason of a lack of any visible sedimentary features, it is hard to decide between a storm and a tsunami origin. To solve this issue, the authors have used the Anisotropy of Magnetic Susceptibility (AMS) to evidence the sediment fabric. The validity of the method for reconstructing flow direction has been proved when applied on sediments in the aftermath of a tsunami event, for which the behaviour was well documented (2004 IOT). We present herein an application of this method for a 56 cm thick paleo-deposit dated 4220 BP laying under the soil covered by the 2004 IOT, SE of Banda Aceh, North Sumatra. We analysed this homogenous deposit, lacking of any visible structure, using methods of classic sedimentology to confirm the occurrence of a high energy event. We then applied AMS technique that allowed the reconstruction of flow characteristics during sediment emplacement. We show that all the sequence was emplaced by uprush phases and that the local topography played a role on the re-orientation of a part of the uprush flow, creating strong reverse current. This particular behaviour was reported by eyewitnesses during the 2004 IOT event.

Deep Borehole Disposal Concept: Development of Universal Canister Concept of Operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rigali, Mark J.; Price, Laura L.

This report documents key elements of the conceptual design for deep borehole disposal of radioactive waste to support the development of a universal canister concept of operations. A universal canister is a canister that is designed to be able to store, transport, and dispose of radioactive waste without the canister having to be reopened to treat or repackage the waste. This report focuses on the conceptual design for disposal of radioactive waste contained in a universal canister in a deep borehole. The general deep borehole disposal concept consists of drilling a borehole into crystalline basement rock to a depth ofmore » about 5 km, emplacing WPs in the lower 2 km of the borehole, and sealing and plugging the upper 3 km. Research and development programs for deep borehole disposal have been ongoing for several years in the United States and the United Kingdom; these studies have shown that deep borehole disposal of radioactive waste could be safe, cost effective, and technically feasible. The design concepts described in this report are workable solutions based on expert judgment, and are intended to guide follow-on design activities. Both preclosure and postclosure safety were considered in the development of the reference design concept. The requirements and assumptions that form the basis for the deep borehole disposal concept include WP performance requirements, radiological protection requirements, surface handling and transport requirements, and emplacement requirements. The key features of the reference disposal concept include borehole drilling and construction concepts, WP designs, and waste handling and emplacement concepts. These features are supported by engineering analyses.« less

Mapping and DOWNFLOW simulation of recent lava flow fields at Mount Etna

NASA Astrophysics Data System (ADS)

Tarquini, Simone; Favalli, Massimiliano

2011-07-01

In recent years, progress in geographic information systems (GIS) and remote sensing techniques have allowed the mapping and studying of lava flows in unprecedented detail. A composite GIS technique is introduced to obtain high resolution boundaries of lava flow fields. This technique is mainly based on the processing of LIDAR-derived maps and digital elevation models (DEMs). The probabilistic code DOWNFLOW is then used to simulate eight large flow fields formed at Mount Etna in the last 25 years. Thanks to the collection of 6 DEMs representing Mount Etna at different times from 1986 to 2007, simulated outputs are obtained by running the DOWNFLOW code over pre-emplacement topographies. Simulation outputs are compared with the boundaries of the actual flow fields obtained here or derived from the existing literature. Although the selected fields formed in accordance with different emplacement mechanisms, flowed on different zones of the volcano over different topographies and were fed by different lava supplies of different durations, DOWNFLOW yields results close to the actual flow fields in all the cases considered. This outcome is noteworthy because DOWNFLOW has been applied by adopting a default calibration, without any specific tuning for the new cases considered here. This extensive testing proves that, if the pre-emplacement topography is available, DOWNFLOW yields a realistic simulation of a future lava flow based solely on a knowledge of the vent position. In comparison with deterministic codes, which require accurate knowledge of a large number of input parameters, DOWNFLOW turns out to be simple, fast and undemanding, proving to be ideal for systematic hazard and risk analyses.

Feeder systems of acidic lava flows from the Paraná-Etendeka Igneous Province in southern Brazil and their implications for eruption style

NASA Astrophysics Data System (ADS)

de Lima, Evandro Fernandes; Waichel, Breno Leitão; Rossetti, Lucas De Magalhães May; Sommer, Carlos Augusto; Simões, Matheus Silva

2018-01-01

In the Rio Grande do Sul State, southern Brazil, the volcanic sequence of the Paraná-Etendeka Igneous Province consists of pahoehoe and rubbly pahoehoe lava flows with basaltic and basaltic andesitic composition respectively, overlaid by acidic volcanic rocks. The acidic volcanic rocks of the Paraná-Etendeka Igneous Province exhibit textures and structures that can be related to effusive and/or explosive eruptions generating predominantly rheoignimbrites. The huge lava volume related to the emplacement of large igneous provinces implicates on efficient feeder systems that are more commonly observed in continental environments. In the Paraná-Etendeka Igneous Province, feeders of basaltic rocks are exposed in several dyke swarms (Ponta Grossa NW trending, Florianópolis/Skeleton Coast (NW Namibia) N-S trending, Serra do Mar NE trending and Henties Bay/Outjo NE trending). In contrast, the only feeder system proposed to the acidic rocks of the Paraná-Etendeka Igneous Province is the Messum complex in Namibia (Milner et al. 1995). In the study area, the opening of three quarries for the extraction of dimension stones has exposed impressive structures/textures that show the effusive emplacement and the ductile to fragile-ductile magma transition along the acidic feeder dykes. Besides that, magma mixing/mingling processes between two acidic magmas are observed along the dykes. Here we describe new occurrences of acidic feeder dykes, correlate the dykes with acidic flows and discuss their importance to understand the emplacement of the Palmas type acid units in southern Brazil.

Multi-pack Disposal Concepts for Spent Fuel (Rev. 0)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hadgu, Teklu; Hardin, Ernest; Matteo, Edward N.

2015-12-01

At the initiation of the Used Fuel Disposition (UFD) R&D campaign, international geologic disposal programs and past work in the U.S. were surveyed to identify viable disposal concepts for crystalline, clay/shale, and salt host media (Hardin et al., 2012). Concepts for disposal of commercial spent nuclear fuel (SNF) and high-level waste (HLW) from reprocessing are relatively advanced in countries such as Finland, France, and Sweden. The UFD work quickly showed that these international concepts are all “enclosed,” whereby waste packages are emplaced in direct or close contact with natural or engineered materials . Alternative “open” modes (emplacement tunnels are keptmore » open after emplacement for extended ventilation) have been limited to the Yucca Mountain License Application Design (CRWMS M&O, 1999). Thermal analysis showed that, if “enclosed” concepts are constrained by peak package/buffer temperature, waste package capacity is limited to 4 PWR assemblies (or 9-BWR) in all media except salt. This information motivated separate studies: 1) extend the peak temperature tolerance of backfill materials, which is ongoing; and 2) develop small canisters (up to 4-PWR size) that can be grouped in larger multi-pack units for convenience of storage, transportation, and possibly disposal (should the disposal concept permit larger packages). A recent result from the second line of investigation is the Task Order 18 report: Generic Design for Small Standardized Transportation, Aging and Disposal Canister Systems (EnergySolution, 2015). This report identifies disposal concepts for the small canisters (4-PWR size) drawing heavily on previous work, and for the multi-pack (16-PWR or 36-BWR).« less

Multi-Pack Disposal Concepts for Spent Fuel (Revision 1)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hardin, Ernest; Matteo, Edward N.; Hadgu, Teklu

2016-01-01

At the initiation of the Used Fuel Disposition (UFD) R&D campaign, international geologic disposal programs and past work in the U.S. were surveyed to identify viable disposal concepts for crystalline, clay/shale, and salt host media. Concepts for disposal of commercial spent nuclear fuel (SNF) and high-level waste (HLW) from reprocessing are relatively advanced in countries such as Finland, France, and Sweden. The UFD work quickly showed that these international concepts are all “enclosed,” whereby waste packages are emplaced in direct or close contact with natural or engineered materials . Alternative “open” modes (emplacement tunnels are kept open after emplacement formore » extended ventilation) have been limited to the Yucca Mountain License Application Design. Thermal analysis showed that if “enclosed” concepts are constrained by peak package/buffer temperature, that waste package capacity is limited to 4 PWR assemblies (or 9 BWR) in all media except salt. This information motivated separate studies: 1) extend the peak temperature tolerance of backfill materials, which is ongoing; and 2) develop small canisters (up to 4-PWR size) that can be grouped in larger multi-pack units for convenience of storage, transportation, and possibly disposal (should the disposal concept permit larger packages). A recent result from the second line of investigation is the Task Order 18 report: Generic Design for Small Standardized Transportation, Aging and Disposal Canister Systems. This report identifies disposal concepts for the small canisters (4-PWR size) drawing heavily on previous work, and for the multi-pack (16-PWR or 36-BWR).« less

How to build a mid-crustal intrusive suite: geologic mapping, U-Pb geo-/thermochronology, and thermal modeling of the Bergell Intrusion, Central Alps

NASA Astrophysics Data System (ADS)

Samperton, K. M.; Schoene, B.; Annen, C.

2015-12-01

Insights into the characteristic rates and processes of crustal magmatic systems can best be made through the integration of observational, analytical and modeling perspectives. We present such an approach in reconstructing the emplacement, differentiation and cooling history of the Bergell Intrusion (N Italy/SE Switzerland), a normally-zoned pluton preserving a ~10 km mid-crustal transect. U-Pb zircon, titanite and allanite geo-/thermochronology of Bergell granitoids provide key empirical constraints for informing numerical simulations of pulse-wise, incremental assembly. Protracted zircon crystallization histories, representing the time between magma zircon saturation and cooling to the solidus, provide a direct petrologic link to forward models of magma emplacement, both of which can be used to derive quantitative magmatic cooling rates for the middle crust. Titanite and allanite dates provide additional constraints on the timing of solidification. Geochronology and modeling are performed in the context of detailed field and structural observations, including those previously interpreted as evidence of upward, pluton-scale melt migration via floor convergence/roof ballooning. Combined Bergell data and modeling demonstrate that pulsed assembly can lead to the formation of substantial melt reservoirs in the middle crust: this finding is largely in contrast to similar models of shallow crustal plutons, highlighting the importance of factors such as ambient country rock temperature in affecting melt residence timescales. This work emphasizes the importance of implementing joint data/modeling studies to intrusive rocks across the full range of spatial scales, emplacement levels and tectonic settings observed on Earth.

UAV Photogrammetry of Inflated Komatiite Flow Lobes in an Archean Bimodal Volcanic Terrane, Yilgarn Craton, Western Australia

NASA Astrophysics Data System (ADS)

Barnes, S. J.; Dering, G.

2016-12-01

Previous studies of large komatiite fields in Archean greenstone belts in Western Australia and elsewhere have led to the suggestion that komatiite lavas were emplaced by similar mechanisms to modern pahoehoe flows, notwithstanding the very low viscosities and sea-floor eruption setting. Of komatiites. We use UAV photogrammetry to identify and map inflation features characteristic of modern pahoehoe flows in Archean komatiites at the Gordon Sirdar Lake locality near Kalgoorlie. Komatiite lavas, forming part of the 2705 Ma old plume-related bimodal volcanic sequence of the Eastern Goldfields Superterrane, Yilgarn Craton, were emplaced within a sequence of dacitic lava flows and semi-consolidated tuffs. The sequence was tilted to the vertical on the flanks of a regional isoclinal fold, and is exposed as partially weathered outcrop in the bed of a playa lake. Komatiite lava lobes form characteristic lenticular cross sections ranging from 1-6 m thick and up to 20m long, in some cases with lower margins draped over pre-existing dacite flow tops, and in others showing invasive textures implying eruption onto or into wet sediment. Inflation features include tumuli, inflation clefts, breakouts, and terraced margins. Spinifex textures are preserved locally at flow tops and rarely at bases. High temperature (>1400 C) and low viscosities (<50 Pa s) of komatiites evidently do not preclude inflation as an emplacement mechanism of individual flows. Flow-top morphology has been used to identify inflation of basaltic lava flows in Martian environments. We suggest these criteria may be extended to the possible recognition of Martian komatiites.

The effect of oxygen fugacity on the rheological evolution of crystallizing basaltic melts

NASA Astrophysics Data System (ADS)

Kolzenburg, S.; Di Genova, D.; Giordano, D.; Hess, K. U.; Dingwell, D. B.

2018-04-01

Storage and transport of silicate melts in the Earth's crust and their emplacement on the planet's surface occur almost exclusively at sub-liquidus temperatures. At these conditions, the melts undergo crystallization under a wide range of cooling-rates, deformation-rates, and oxygen fugacities (fO2). Oxygen fugacity is known to influence the thermodynamics and kinetics of crystallization in magmas and lavas. Yet, its influence on sub-liquidus rheology remains largely uncharted. We present the first rheological characterization of crystallizing lavas along natural cooling paths and deformation-rates and at varying fO2. Specifically, we report on apparent viscosity measurements for two crystallizing magmatic suspensions 1) at log ⁡ fO2 of -9.15 (quartz-fayalite-magnetite buffer, QFM, -2.1) and 2) in air. These fugacities span a range of reduced to oxidized conditions pertinent to magma migration and lava emplacement. We find that: 1) crystallization at constant cooling-rates results in a quasi-exponential increase in the apparent viscosity of the magmatic suspensions until they achieve their rheological cut off temperature (Tcutoff), where the melt effectively solidifies 2) the rheological departure and Tcutoff increase with increasing fO2 and 3) increasing fO2 results in decreased crystallization-rates. Based on the experimental results and by comparison with previous rheological isothermal studies we propose a generalisation of the effect of fO2 on the dynamic rheological evolution of natural magmatic and volcanic suspensions. We further discuss the implications for magmatic transport in plumbing and storage systems (e.g. conduits, dikes and magma chambers) and during lava flow emplacement.

Mars: The initial emplacement of ground ice in response to the thermal evolution of its early crust

NASA Technical Reports Server (NTRS)

Clifford, Stephen M.

1993-01-01

Given the geomorphic evidence for the widespread occurrence of water and ice in the early martian crust, and the difficulty involved in accounting for this distribution given the present climate, it has been suggested that the planet's early climate was originally more Earth-like, permitting the global emplacement of crustal H2O by direct precipitation as snow or rain. The resemblance of the martian valley networks to terrestrial runoff channels, and their almost exclusive occurrence in the planet's ancient (approximately 4 billion year old) heavily cratered terrain, is often cited as evidence of just such a period. An alternative school of thought suggests that the early climate did not differ substantially from that of today. Advocates of this view find no compelling reason to invoke a warmer, wetter period to explain the origin of the valley networks. Rather, they cite evidence that the primary mechanism of valley formation was ground water sapping, a process that does not require that surface water exist in equilibrium with the atmosphere. However, while sapping may successfully explain the origin of the small valleys, it fails to address how the crust was initially charged with ice as the climate evolved towards its present state. Therefore, given the uncertainty regarding the environmental conditions that prevailed on early Mars, the initial emplacement of ground ice is considered from two perspectives: (1) that the early climate started warm and wet, but gradually cooled with time; and (2) that it never differed substantially from that of today.

Depositional processes in large-scale debris-flow experiments

USGS Publications Warehouse

Major, J.J.

1997-01-01

This study examines the depositional process and characteristics of deposits of large-scale experimental debris flows (to 15 m3) composed of mixtures of gravel (to 32 mm), sand, and mud. The experiments were performed using a 95-m-long, 2-m-wide debris-flow flume that slopes 31??. Following release, experimental debris flows invariably developed numerous shallow (???10 cm deep) surges. Sediment transported by surges accumulated abruptly on a 3?? runout slope at the mouth of the flume. Deposits developed in a complex manner through a combination of shoving forward and shouldering aside previously deposited debris and through progressive vertical accretion. Progressive accretion by the experimental flows is contrary to commonly assumed en masse sedimentation by debris flows. Despite progressive sediment emplacement, deposits were composed of unstratified accumulations of generally unsorted debris; hence massively textured, poorly sorted debris-flow deposits are not emplaced uniquely en masse. The depositional process was recorded mainly by deposit morphology and surface texture and was not faithfully registered by interior sedimentary texture; homogeneous internal textures could be misinterpreted as the result of en masse emplacement by a single surge. Deposition of sediment by similar, yet separate, debris flows produced a homogenous, massively textured composite deposit having little stratigraphic distinction. Similar deposit characteristics and textures are observed in natural debris-flow deposits. Experimental production of massively textured deposits by progressive sediment accretion limits interpretations that can be drawn from deposit characteristics and casts doubt on methods of estimating flow properties from deposit thickness or from relations between particle size and bed thickness.

Benchmarking computational fluid dynamics models of lava flow simulation for hazard assessment, forecasting, and risk management

USGS Publications Warehouse

Dietterich, Hannah; Lev, Einat; Chen, Jiangzhi; Richardson, Jacob A.; Cashman, Katharine V.

2017-01-01

Numerical simulations of lava flow emplacement are valuable for assessing lava flow hazards, forecasting active flows, designing flow mitigation measures, interpreting past eruptions, and understanding the controls on lava flow behavior. Existing lava flow models vary in simplifying assumptions, physics, dimensionality, and the degree to which they have been validated against analytical solutions, experiments, and natural observations. In order to assess existing models and guide the development of new codes, we conduct a benchmarking study of computational fluid dynamics (CFD) models for lava flow emplacement, including VolcFlow, OpenFOAM, FLOW-3D, COMSOL, and MOLASSES. We model viscous, cooling, and solidifying flows over horizontal planes, sloping surfaces, and into topographic obstacles. We compare model results to physical observations made during well-controlled analogue and molten basalt experiments, and to analytical theory when available. Overall, the models accurately simulate viscous flow with some variability in flow thickness where flows intersect obstacles. OpenFOAM, COMSOL, and FLOW-3D can each reproduce experimental measurements of cooling viscous flows, and OpenFOAM and FLOW-3D simulations with temperature-dependent rheology match results from molten basalt experiments. We assess the goodness-of-fit of the simulation results and the computational cost. Our results guide the selection of numerical simulation codes for different applications, including inferring emplacement conditions of past lava flows, modeling the temporal evolution of ongoing flows during eruption, and probabilistic assessment of lava flow hazard prior to eruption. Finally, we outline potential experiments and desired key observational data from future flows that would extend existing benchmarking data sets.

Geochronologic and paleomagnetic evidence defining the relationship between the Miocene Hiko and Racer Canyon tuffs, eccentric outflow lobes from the Caliente caldera complex, southeastern Great Basin, USA

USGS Publications Warehouse

Gromme, S.; Deino, A.M.; Best, M.G.; Hudson, M.R.

1997-01-01

Outflow sheets of the Hiko tuff and the Racer Canyon tuff, which together extend over approximately 16000 km2 around the Caliente caldera complex in southeastern Nevada, have long been considered to be products of simultaneous or near-simultaneous eruptions from inset calderas in the west and east ends, respectively, of the caldera complex. New high-precision 40Ar/39Ar geochronology and paleomagnetic data demonstrate that emplacement of the uppermost part of the Racer Canyon tuff at 18.33??0.03 Ma was nearly synchronous with emplacement of the single outflow cooling unit of the much larger overlying Hiko tuff at 18.32??0.04 Ma. Based on comparison with the geomagnetic polarity time scale derived from the sea-floor spreading record, we conclude that emplacement of the first of several outflow cooling units of the Racer Canyon tuff commenced approximately 0.5 m.y. earlier. Only one paleomagnetic polarity is found in the Hiko tuff, but at least two paleomagnetic reversals have been found in the Racer Canyon tuff. The two formations overlap in only one place, at and near Panaca Summit northeast of the center of the Caliente caldera complex; here the Hiko tuff is stratigraphically above the Racer Canyon tuff. This study demonstrates the power of combining 40Ar/39Ar and paleomagnetic data in conjunction with phenocryst compositional modes to resolve problematic stratigraphic correlations in complex ash-flow sequences where use of one method alone might not eliminate ambiguities.

Garden City Vein Complex, Gale Crater, Mars: Implications for Late Diagenetic Fluid Flow

NASA Astrophysics Data System (ADS)

Kronyak, R. E.; Kah, L. C.; Blaney, D. L.; Sumner, D. Y.; Fisk, M. R.; Rapin, W.; Nachon, M.; Mangold, N.; Grotzinger, J. P.; Wiens, R. C.

2015-12-01

Calcium sulfate filled fractures are observed in nearly all stratigraphic units encountered by the Mars Science Laboratory (MSL) Curiosity rover. The mm-scale of veins, however, provides little evidence for emplacement style. From sols 924-949, Curiosity observed a vein rich outcrop called Garden City, which shows variation in both thickness and complexity of veins. Extensive Mastcam and MAHLI imaging was conducted across the outcrop to provide textural detail that can be related to emplacement mechanisms. Additionally, Curiosity collected geochemical data on 17 ChemCam targets and 7 APXS targets, shedding light on the composition and variety of potential vein fluids. The Garden City vein system records (1) the presence of distinct dark-toned and light-toned (calcium sulfate) mineralization, and (2) the presence of laminated, epitaxial, and brecciated fabrics that suggest multiple emplacement modes. Dark-toned mineralization is observed as erosionally resistant ridges predominantly along fracture walls. Although erosional resistance may reflect the permeability of host rock to fracture-borne fluids, at Garden City, laminated textures suggest that at least some mineralization may have occurred as fracture-fill. Light-toned mineralization often bisects dark-toned material, indicating re-use of fluid pathways. Light-toned veinlets permeate fracture walls, and the largest veins entrain host rock and dark-toned material within calcium sulfate matrix. Such brecciation indicates high forces associated with fluid expulsion. Elsewhere, linear patterns occur broadly perpendicular to fracture walls, and are interpreted to represent epitaxial crystal growth, suggesting lower flow rates and fluid flow pressures within the fracture system. Together these observations indicate multiple episodes of fluid flow in the Gale Crater system.

Emplacement and Deformation of Mesozoic Gabbros of the High Atlas (Morocco): Paleomagnetism and Magnetic Fabrics

NASA Astrophysics Data System (ADS)

Calvín, P.; Ruiz-Martínez, V. C.; Villalaín, J. J.; Casas-Sainz, A. M.; Moussaid, B.

2017-12-01

A paleomagnetic and magnetic fabric study is performed in Upper Jurassic gabbros of the central High Atlas (Morocco). These gabbros were emplaced in the core of preexisting structures developed during the extensional stage and linked to basement faults. These structures were reactivated as anticlines during the Cenozoic compressional inversion. Gabbros from 19 out of the 33 sampled sites show a stable characteristic magnetization, carried by magnetite, which has been interpreted as a primary component. This component shows an important dispersion due to postemplacement tectonic movements. The absence of paleoposition markers in these igneous rocks precludes direct restorations. A novel approach analyzing the orientation of the primary magnetization is used here to restore the magmatic bodies and to understand the deformational history recorded by these rocks. Paleomagnetic vectors are distributed along small circles with horizontal axes, indicating horizontal axis rotations of the gabbro bodies. These rotations are higher when the ratio between shales and gabbros in the core of the anticlines increases. Due to the uncertainties inherent to this work (the igneous bodies recording strong rotations), interpretations must be qualitative. The magnetic fabric is carried by ferromagnetic (s.s.) minerals mimicking the magmatic fabric. Anisotropy of magnetic susceptibility (AMS) axes, using the rotation routine inferred from paleomagnetic results, result in more tightly clustered magnetic lineations, which also become horizontal and are considered in terms of magma flow trend during its emplacement: NW-SE (parallel to the general extensional direction) in the western sector and NE-SW (parallel to the main faults) in the easternmost structures.

Structural development of the Red Hill portion of the Feather River ultramafic complex, Pulmas County, California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weisenberg, C.W.

1979-01-01

The Feather River Ultramafic Complex is a partially serpentinized body of metamorphosed alpine peridotite and gabbro that lies along the northern part of the Melones fault zone, a NNW trending belt in the Northern Sierra Nevada. The complex was studied in the area of Red Hill, near the canyon of the North Fork, Feather River. The complex is separated from the Calaveras Terrain and Arlington Formation country rocks by steep faults; the Melones Fault on the east and the Rich Bar Fault on the west. Units recognized within the complex include Rich Bar metamorphic rocks, peridotite, metaperidotite, tremolite-olivine schist, hornblendemore » schist, and layered metagabbro. The Rich Bar metamorphic rocks are tectonic slices of amphibolite grade hornblende schist, mica schist, and quartzite found along the Rich Bar Fault. The complex shows evidence of 4 major events. E-1 (Pennsylvania-Permian) was formation of the peridotite-gabbro complex. E-2 (Permo-Triassic) consisted of pervasive shearing parallel to the Rich Bar Fault associated with initial emplacement within the Sierra Nevada. E-3 is believed to be compression and metamorphism (serpentinization) associated with the Nevadan orogeny. E-4 was associated with intrusion of nearby plutons. The regional association of the complex with late paleozoic arc volcanics of the Taylorsville area suggest formation near or under an island arc. Metamorphism during emplacement indicates association with the arc at that time. Left-lateral shear during emplacement along the Rich Bar Fault indicates NW directed thrusting when the layering in metagabbro is rotated to horizontal.« less

Detrital zircon geochronology overlying the Naga Hills ophiolite

NASA Astrophysics Data System (ADS)

Roeder, T.; Aitchison, J.; Stojanovic, D.; Agarwal, A.; Ao, A.; Bhowmik, S.

2013-12-01

The Nagaland ophiolite in NE India represents the easternmost section of the ophiolitic belt running along the India-Asia suture. Outcrops near the border between Nagaland and Myanmar include not only a full suite of ophiolitic rocks but also high P/T blueschist rocks within a serpentinite-matrix mélange. Although Upper Jurassic radiolarians have been reported from the ophiolite itself (Baxter et al., 2011), few constraints have been placed on the timing of its emplacement onto India. Terrestrial sediments of the Phokphur Formation unconformably overlie the ophiolite. Similar to other sediments from along the ophiolite belt such as the Luiqu conglomerates in Tibet (Davis et al., 2002), they contain detritus derived from both the ophiolite and the continental margin onto which the ophiolite was emplaced. The clastic sediments of the Phokphur Formation potentially record not only the timing of ophiolite generation but also the ages of source terranes and can be used to place a minimum age constraint on the timing of ophiolite emplacement. As a contribution towards extending knowledge of the ophiolite belt and the India/Asia collision, we report preliminary results of an investigation into the sedimentology and detrital zircon geochronology of the Phokphur Formation in areas near Salumi and Zephu. Baxter, A.T., Aitchison, J.C., Zyabrev, S.V., Ali, J.R., 2011. Upper Jurassic radiolarians from the Naga Ophiolite, Nagaland, northeast India. Gondwana Research 20, 638-644. Davis, A.M., Aitchison, J.C., Badengzhu, Luo, H., Zyabrev, S., 2002. Paleogene island arc collision-related conglomerates, Yarlung-Tsangpo suture zone, Tibet. Sedimentary Geology 150, 247-273.

PERMEABLE REACTIVE BARRIER TECHNOLOGIES FOR CONTAMINANT REMEDIATION

EPA Science Inventory

Environmental scientists are generally familiar with the concept of barriers for restricting the movement of contaminant plumes in ground water. Such barriers are typically constructed of highly impermeable emplacements of materials such as grouts, slurries, or sheet pilings to ...

Paleointensity in ignimbrites and other volcaniclastic flows

NASA Astrophysics Data System (ADS)

Bowles, J. A.; Gee, J. S.; Jackson, M. J.

2011-12-01

Ash flow tuffs (ignimbrites) are common worldwide, frequently contain fine-grained magnetite hosted in the glassy matrix, and often have high-quality 40Ar/39Ar ages. This makes them attractive candidates for paleointensity studies, potentially allowing for a substantial increase in the number of well-dated paleointensity estimates. However, the timing and nature of remanence acquisition in ignimbrites are not sufficiently understood to allow confident interpretation of paleointensity data from ash flows. The remanence acquisition may be a complex function of mineralogy and thermal history. Emplacement conditions and post-emplacement processes vary considerably between and within tuffs and may potentially affect the ability to recover ancient field intensity information. To better understand the relevant magnetic recording assemblage(s) and remanence acquisition processes we have collected samples from two well-documented historical ignimbrites, the 1980 ash flows at Mt. St. Helens (MSH), Washington, and the 1912 flows from Mt. Katmai in the Valley of Ten Thousand Smokes (VTTS), Alaska. Data from these relatively small, poorly- to non-welded historical flows are compared to the more extensive and more densely welded 0.76 Ma Bishop Tuff. This sample set enables us to better understand the geologic processes that destroy or preserve paleointensity information so that samples from ancient tuffs may be selected with care. Thellier-type paleointensity experiments carried out on pumice blocks sampled from the MSH flows resulted in a paleointensity of 55.8 μT +/- 0.8 (1 standard error). This compares favorably with the actual value of 56.0 μT. Excluded specimens of poor technical quality were dominantly from sites that were either emplaced at low temperature (<350°C) or were subject to post-emplacement hydrothermal alteration. The VTTS experienced much more wide-spread low-temperature hydrothermal activity than did MSH. Pumice-bearing ash matrix samples from this locality are characterized by at least two magnetic phases, one of which appears to carry a chemical remanent magnetization. Paleointensities derived from the second phase give results that vary widely but which may be correlated with degree of hydrothermal alteration or hydration. Preliminary data from the Bishop Tuff suggests that vapor-phase alteration at high (>600°C) temperatures does not corrupt the paleointensity signal, and additional data will be presented which explores this more fully.

Sensor Emplacement Techniques and Seismic Noise Analysis for USArray Transportable Array Seismic Stations

NASA Astrophysics Data System (ADS)

Busby, Robert; Frassetto, Andy; Hafner, Katrin; Woodward, Robert; Sauter, Allan

2013-04-01

In preparation for deployment of EarthScope's USArray Transportable Array (TA) in Alaska beginning in 2014, the National Science Foundation (NSF) is supporting exploratory work on seismic station design, sensor emplacement and communication concepts appropriate for the challenging high-latitude environment that is proposed for deployment. IRIS has installed several experimental stations to evaluate different sensor emplacement schemes both in Alaska and the lower-48 U.S. The goal of these tests is to maintain or enhance a station's noise performance while minimizing its footprint and the equipment, materials, and overall expense required for its construction. Motivating this approach are recent developments in posthole broadband seismometer design and the unique conditions for operating in Alaska, where there are few roads, cellular communications are scarce, most areas are only accessible by small plane or helicopter, and permafrost underlies much of the northern tundra. In this study we review our methods used for directly emplacing of broadband seismometers in comparison to the current methods used to deploy TA stations. These primarily focus on using an auger to drill three to five meters, beneath the active layer of the permafrost, or coring directly into surface bedrock to one meter depth using a portable drill. Both methods have proven logistically effective in trials. Subsequent station performance can be quantitatively assessed using probability density functions summed from power spectral density estimates. These are calculated for the continuous time series of seismic data recorded for each channel of the seismometer. There are five test stations currently operating in Alaska. One was deployed in August 2011 and the remaining four in October 2012. Our results show that the performance of seismometers in Alaska with auger-hole or core-hole installations equals or exceeds that of the quietest TA stations in the lower-48, particularly at long periods, and in exceptional cases approaches the performance of the GSN low noise model. The station at Poker Flat Research Range, Alaska co-locates a sensor in a 5 meter deep auger hole with a 2 meter deep TA tank installation typical of the lower-48. The augered seismometer is currently over 20 dB quieter at periods over 40 seconds than the TA tank installation. Similar performance has been observed at other TA stations, which also compare favorably to co-located permanent stations.

Synkinematic emplacement of the magmatic epidote bearing Major Isidoro tonalite-granite batholith: Relicts of an Ediacaran continental arc in the Pernambuco-Alagoas domain, Borborema Province, NE Brazil

NASA Astrophysics Data System (ADS)

Silva, Thyego R. da; Ferreira, Valderez P.; Lima, Mariucha M. Correia de; Sial, Alcides N.; Silva, José Mauricio R. da

2015-12-01

The Neoproterozoic Major Isidoro batholith (˜100 km2), composed of metaluminous to slightly peraluminous magmatic epidote-bearing tonalite to granite, is part of the Águas Belas-Canindé composite batholith, which intruded the Pernambuco-Alagoas Domain of the Borborema Province, northeastern Brazil. These rocks contain biotite, amphibole, titanite and epidote that often shows an allanite core as key mafic mineral phases. K-diorite mafic enclaves are abundant in this pluton as well as are amphibole-rich clots. The plutonic rocks are medium-to high-K calc-alkaline, with SiO2 varying from 59.1 to 71.6%, Fe# from 0.6 to 0.9 and total alkalis from 6.1 to 8.5%. Chondrite-normalized REE patterns are moderately fractionated, show (La/Lu)N ratios from 13.6 to 31.8 and discrete negative Eu anomalies (0.48-0.85). Incompatible-element spidergrams exhibit negative Nb-Ta and Ti anomalies. This batholith was emplaced around 627 Ma (U-Pb SHRIMP zircon age) coevally with an amphibolite-facies metamorphic event in the region. It shows Nd-model age varying from 1.1 to 1.4 Ga, average ɛNd(627Ma) of -1.60 and back-calculated (627 Ma) initial 87Sr/86Sr ratios from 0.7069 to 0.7086. Inherited zircon cores that yielded 206Pb/238U ages from 800 to 1000 Ma are likely derived from rocks formed during the Cariris Velhos (1.1-0.9 Ga) orogenic event. These isotopic data coupled with calculated δ18O(w.r.) value of +8.75‰ VSMOW indicate an I-type source and suggest a reworked lower continental crust as source rock. A granodioritic orthogneiss next to the Major Isidoro pluton, emplaced along the Jacaré dos Homens transpressional shear zone, yielded a U-Pb SHRIMP zircon age of 642 Ma, recording early tectonic movements along this shear zone that separates the Pernambuco-Alagoas Domain to the north, from the Sergipano Domain to the south. The emplacement of the Major Isidoro pluton was synkinematic, coeval with the development of a regional flat-lying foliation, probably during the peak of metamorphism related to the convergence/contractional deformation of the São Francisco craton and Pernambuco-Alagoas block during the Brasiliano Orogeny.

Posthole Sensor Performance in the USArray Transportable Array - Results from Testing and Initial Deployments in Alaska and Canada

NASA Astrophysics Data System (ADS)

Frassetto, A.; Busby, R. W.; Hafner, K.; Sauter, A.; Woodward, R.

2014-12-01

To prepare for the deployment of EarthScope's USArray Transportable Array (TA) in Alaska and adjacent Canada over the next several years, IRIS has evaluated different strategies for emplacing posthole seismometers. The goal of this work has been to maintain or enhance a TA station's noise performance while reducing the weight and logistical considerations required for its installation. Motivating this research are developments in posthole broadband seismometer design and the unique conditions for operating in this region, where many potential sites are located on frost-fractured outcrops or underlain by permafrost, in either case only accessible by helicopter. Current emplacement methods use a portable rig to auger or hammer-drill a hole 2.5-5 meters deep, in unconsolidated materials and permafrost, or by diamond bit coring 1-3 meters into rock. These emplacements are used at new TA installations and upgrades to existing AK network stations, and we compare their performance to the lower-48 TA vault installations. Through July 2014 there are eight TA and six upgraded AK stations operating under USArray; including five since at least October 2012, providing a detailed record of seasonal and/or site-specific behavior. We also discuss testing of different downhole configurations for 13 stations deployed at Piñon Flat Observatory in California since April 2014. Station performance is presented and compared using probability density functions summed from hourly power spectral density calculations. These are computed for the continuous time series of seismic data recorded on each seismic channel. Our results show that the noise performance of seismometers in Alaska with cased- or core- hole installations sometimes exceeds that of the quietest TA stations in the lower-48, particularly for the horizontal channels at long periods. We analyze and discuss the performance of example stations, comparing to other nearby seismometers. We also examine the performance of AK stations before and after they have been converted from surface vault to posthole configuration. At Piñon Flat, different methods for packing the seismometer and clamping its cables within cased holes has guided development of field procedure. The new posthole emplacements generally improve upon the mean performance of the lower-48 TA vaults.

The Sedimentology and Origins of a Giant Mass Transport Deposit: The Nataraja Slide, Arabian Sea

NASA Astrophysics Data System (ADS)

Dailey, S. K.; Clift, P. D.; Kulhanek, D. K.; Calves, G.

2017-12-01

The Nataraja Slide was recently discovered by seismic mapping off the west coast of India in the Arabian Sea. Volumetrically estimated to be 19,000 km3, it is the second largest mass transport deposit known on a passive margin. Understanding how this deposit was emplaced is important to constrain how mass wasting affects the bathymetry of sedimentary basins, as well as the effects triggered by such a large event, including tsunamis. The Nataraja Slide was emplaced at 10.8 Ma as a result of collapse of the western India margin, which traveled 550 km into the basin. The deposit has been cored in two locations by the International Ocean Discovery Program (IODP) Expedition 355, where it is 330 m (Site U1456) and 190 m thick (Site U1457). The presence of various deformation structures and the occurrence of a predominantly reworked calcareous nannofossil assemblages are used to define the top of the deposit. The deposit appears to consist of two units at Site U1456 with 22 m of upper Miocene hemipelagic sediment separating them, suggesting emplacement in two large pulses. At both sites, the mass transport deposit has a coarse carbonate-dominated base, composed of clast-supported breccia overlain by massive calcarenite associated with high-energy current transport, and calcilutite. These strata are overlain by steeply inclined, slumped but otherwise coherent pyritized, siliciclastic mudstones and minor volumes of matrix-supported conglomerates, interpreted as debris flows. Emplacement appears to have eroded significant thicknesses of Indus Fan turbidites at Site U1456, as there is a hiatus that is a minimum of 2.5 m.y. at the base. At Site U1457, the slide directly overlies Paleocene reddish mudstones on the eastern flank of the Laxmi Ridge, which likely diverted the sediment to the south in the Laxmi Basin and away from the main Arabian Sea basin. Bulk sediment Nd and Sr isotope geochemistry show a provenance, similar to those of the Tapti and Narmada rivers in western India, and include entrainment of Indus Fan material particularly in the top of the deposit, and drape. Our study aims to further evaluate the depositional mechanisms and original trigger for the mass wasting event by using petrography to understand the sediment in this upper Miocene mass transport deposit.

Age distribution of lithium-cesium-tantalum enriched pegmatites and relationships to orogeny

NASA Astrophysics Data System (ADS)

McCauley, A.; Bradley, D. C.

2011-12-01

Pegmatites account for about one third of the world's lithium production, most of the tantalum, and all of the cesium. Pegmatites enriched in these elements (LCT pegmatites) are widely interpreted as extreme fractionation products of orogenic granitic melts, although it is not always possible to tie a particular pegmatite to a known granite of the same age. The global age distribution of LCT pegmatites is similar to the age distributions of common pegmatites, of orogenic granites, and of detrital zircons. Our geochronological synthesis expands on, and generally confirms, the recent study by Tkachev (2011, Geol. Soc. Spec. Publ. 350, 7). The LCT pegmatite maxima at ca. 2650, 1800, 525, 350, and 100 Ma correspond to times of collisional orogeny and, except for the comparatively minor peak at 100 Ma, to times of supercontinent assembly. Between these pulses are long intervals of few or no LCT pegmatites. Global minima in LCT pegmatite abundance overlap with supercontinent tenures at ca. 2450-2225, 1625-1000, 875-725, and 250-200 Ma, as established, for the Precambrian, from global minima in the abundances of passive margins and detrital zircons. A key question that bears on both metallogenesis and exploration strategies is why are some orogenic belts well endowed with LCT pegmatites, whereas other, seemingly similar orogens are barren? For the present study, LCT pegmatites from the Appalachian, Variscan, Damara, and Argentine Precordilleran orogens are being dated by the U-Pb method to relate pegmatite emplacement to other igneous events, shortening, metamorphism, foreland-basin sedimentation, and, on the broadest scale, to supercontinent assembly. Anecdotal evidence suggests that LCT pegmatites typically are emplaced late in orogenic cycles. In the Inland Branch of the Damaride orogen, about 45 m.y. elapsed between initial arc-passive margin collision at ca. 550 Ma and LCT pegmatite emplacement at ca. 505 Ma, very late in the assembly of this part of Gondwana. In the Appalachian orogen, LCT pegmatites evidently were emplaced at ca. 345 and ca. 275 Ma-long after initial arc-passive margin collision. Neither time is particularly remarkable in the long sequence of Appalachian orogenic events. The ca. 275 Ma event was coeval with the last increment of Appalachian plate convergence during the final assembly of Pangea. Possible triggers for melt generation in various pegmatite provinces include late collisional crustal thickening, shear heating, mantle plumes, slab break-off, and lower lithospheric delamination.

Magma batches in the Timber Mountain magmatic system, Southwestern Nevada Volcanic Field, Nevada, USA

NASA Astrophysics Data System (ADS)

Mills, James G.; Saltoun, Benjamin W.; Vogel, Thomas A.

1997-09-01

The common occurrence of compositionally and mineralogically zoned ash flow sheets, such as those of the Timber Mountain Group, provides evidence that the source magma bodies were chemically and thermally zoned. The Rainier Mesa and Ammonia Tanks tuffs of the Timber Mountain Group are both large volume (1200 and 900 km 3, respectively) chemically zoned (57-78 wt.% SiO 2) ash flow sheets. Evidence of distinct magma batches in the Timber Mountain system are based on: (1) major- and trace-element variations of whole pumice fragments; (2) major-element variations in phenocrysts; (3) major-element variations in glass matrix; and (4) emplacement temperatures calculated from Fe-Ti oxides and feldspars. There are three distinct groups of pumice fragments in the Rainier Mesa Tuff: a low-silica group and two high-silica groups (a low-Th and a high-Th group). These groups cannot be related by crystal fractionation. The low-silica portion of the Rainier Mesa Tuff is distinct from the low-silica portion of the overlying Ammonia Tanks Tuff, even though the age difference is less than 200,000 years. Three distinct groups occur in the Ammonia Tanks Tuff: a low-silica, intermediate-silica and a high-silica group. Part of the high-silica group may be due to mixing of the two high-silica Rainier Mesa groups. The intermediate-silica group may be due to mixing of the low- and high-silica Ammonia Tanks groups. Three distinct emplacement temperatures occur in the Rainier Mesa Tuff (869, 804, 723 °C) that correspond to the low-silica, high-Th and low-Th magma batches, respectively. These temperature differences could not have been maintained for any length of time in the magma chamber (cf. Turner, J.S., Campbell, I.H., 1986. Convection and mixing in magma chambers. Earth-Sci. Rev. 23, 255-352; Martin, D., Griffiths, R.W., Campbell, I.H., 1987. Compositional and thermal convection in magma chambers. Contrib. Mineral. Petrol. 96, 465-475) and therefore eruption must have occurred soon after emplacement of the magma batches into the chamber. Emplacement temperatures of the pumice fragments from the Ammonia Tanks Tuff show a continuous gradient of temperatures with composition. This continuous temperature gradient is consistent with the model of storage of magma batches in the Ammonia Tanks group that have undergone both thermal and chemical diffusion.

The 1.33-1.30 Ga Yanliao large igneous province in the North China Craton: Implications for reconstruction of the Nuna (Columbia) supercontinent, and specifically with the North Australian Craton

NASA Astrophysics Data System (ADS)

Zhang, Shuan-Hong; Zhao, Yue; Li, Xian-Hua; Ernst, Richard E.; Yang, Zhen-Yu

2017-05-01

The Yanliao rift zone in the northern North China Craton (NCC) is the location of the standard section for late Paleoproterozoic-Mesoproterozoic stratigraphy in China and is associated with the emplacement of large volumes of diabase sills. Detailed field investigations show that the sills are distributed over a region that is >600 km long and >200 km wide, with areal extent > 1.2 ×105 km2 and cumulative thickness of the sills in any one area ranging from 50 m to >1800 m. High-resolution secondary ion mass spectrometry (SIMS) baddeleyite dating shows that emplacement of these sills occurred between about 1330 and 1305 Ma with a peak age of 1323 Ma. Emplacement of these diabase sills was accompanied by pre-magmatic uplift that started at about 1.35-1.34 Ga as indicated by the disconformity between the Changlongshan and Xiamaling formations and absence of sedimentation after the Xiamaling Formation in some areas. All the diabase sills exhibit similar geochemical features of tholeiitic compositions with intraplate characteristics. Given a relatively short duration of emplacement at 1.33-1.30 Ga, along with the large areal extent and volume, as well as intraplate character, this magmatic province constitutes a large igneous province (LIP). This Yanliao LIP and the accompanying pre-magmatic uplift were related either to a mantle plume and/or continental rifting during breakup of the NCC from the Nuna (Columbia) supercontinent. Paleomagnetic, ash bed and LIP data and other geological constraints suggest that the NCC had a close connection with Siberia, Laurentia, Baltica, North Australia and India crustal blocks. In particular, the most direct age match between the 1.33-1.30 Ga Yanliao LIP and the 1.33-1.30 Ga Derim Derim-Galiwinku LIP of the North Australian Craton (NAC), as well as the similarities between the late Paleoproterozoic-Mesoproterozoic stratigraphic units of the Yanliao rift in the NCC with the southeastern McArthur Basin in the NAC, indicate that the Yanliao and Derim Derim-Galiwinku events are fragmented parts of the same LIP, supporting the paleomagnetically plausible idea that the NCC and NAC were connected (or at least near neighbors) during the early Mesoproterozoic period.

Lava flow field emplacement studies of Manua Ulu (Kilauea Volcano, Hawai'i, United States) and Venus, using field and remote sensing analyses

NASA Astrophysics Data System (ADS)

Byrnes, Jeffrey Myer

2002-04-01

This work examines lava emplacement processes by characterizing surface units using field and remote sensing analyses in order to understand the development of lava flow fields. Specific study areas are the 1969--1974 Mauna Ulu compound flow field, (Kilauea Volcano, Hawai'i, USA), and five lava flow fields on Venus: Turgmam Fluctus, Zipaltonal Fluctus, the Tuli Mons/Uilata Fluctus flow complex, the Var Mons flow field, and Mylitta Fluctus. Lava surface units have been examined in the field and with visible-, thermal-, and radar-wavelength remote sensing datasets for Mauna Ulu, and with radar data for the Venusian study areas. For the Mauna Ulu flow field, visible characteristics are related to color, glass abundance, and dm- to m-scale surface irregularities, which reflect the lava flow regime, cooling, and modification due to processes such as coalescence and inflation. Thermal characteristics are primarily affected by the abundance of glass and small-scale roughness elements (such as vesicles), and reflect the history of cooling, vesiculation and degassing, and crystallization of the lava. Radar characteristics are primarily affected by unit topography and fracturing, which are related to flow inflation, remobilization, and collapse, and reflect the local supply of lava during and after unit emplacement. Mauna Ulu surface units are correlated with pre-eruption topography, lack a simple relationship to the main feeder lava tubes, and are distributed with respect to their position within compound flow lobes and with distance from the vent. The Venusian lava flow fields appear to have developed through emplacement of numerous, thin, simple and compound flows, presumably over extended periods of time, and show a wider range of radar roughness than is observed at Mauna Ulu. A potential correlation is suggested between flow rheology and surface roughness. Distributary flow morphologies may result from tube-fed flows, and flow inflation is consistent with observed surface characteristics. Furthermore, the significance of inflation at Mauna Ulu and comparison of radar characteristics indicates that inflation may, in fact, be more prevalent on Venus than at Mauna Ulu. Although the Venusian flow fields display morphologies similar to those observed within terrestrial flow fields, the Venusian flow units are significantly larger.

The geology of the northern tip of the Arabian-Nubian Shield

NASA Astrophysics Data System (ADS)

Beyth, M.; Eyal, Y.; Garfunkel, Z.

2014-11-01

Recently, a detailed (1:50,000) geological map of the Elat area, southern Israel was published. Attached to this map is a stratigraphic table of the Neoproterozoic metamorphic-magmatic complex of the study area. The Neoproterozoic basement in the Elat area encapsulates the Arabian Nubian Shield (ANS) geologic evolution. Uranium-Lead and Lead-Lead zircon ages, included in previous studies and referred to in this paper, reveal that these rocks were formed during more than 300 million years of Neoproterozoic time. The major process controlling the formation of the ANS as part of the East African Orogen is the closure of the Mozambique Ocean. The first orogenic phase in the Elat area, represented by the metamorphic rocks, includes the development of an island arc, erosion of the islands and deposition, and metamorphism. This event took place between ∼950 Ma and 780-790 Ma. Elat Schist, the oldest metamorphic rock in the area, was deformed and then intruded by quartz dioritic and granitic plutons that were later deformed and metamorphosed. The amphibolite metamorphic rock facies indicate metamorphic conditions of up to 650 °C and between 4 and 5 kbar. The peak of the metamorphic event was most probably before 750 Ma. A gradual change from compressional to extensional stress regime is evidenced by emplacement andesitic magnesium-rich dykes dated to 705 Ma that were later metamorphosed to schistose dykes at a greenschist metamorphic facies. The second orogenic phase (terrane amalgamation, main shaping of crust) was associated with the emplacement of large volumes (>50% of area) of calc-alkaline intrusions in a post-collision setting. These very last stages of metamorphism and deformation are characterized by intrusion of ∼630 Ma granitoids exhibiting some foliation. Pluton emplacement continued also after the end of deformation. Exhumation and transition to an extensional regime is recorded by the intrusion of shallow alkaline granites in ∼608 Ma which were accompanied in ∼609 Ma by rhyolite, andesite and composite dykes. The last magmatic event in the Elat area is represented by the volcano-conglomeratic series comprising rhyolites, basalts, andesites, hypabyssal intrusions of monzonite and syenite and conglomerates. The conglomerates, dated to about 590 Ma, are the products of a major erosion phase in which about 12,000 m of the section were removed. These conglomerates were intruded by 585 Ma rhyolite, andesite and composite dykes. The Neoproterozoic basement is truncated by a peneplain whose age, post 532 Ma, is constrained by the age of the youngest eroded dolerite dykes. This Early Cambrian peneplain was associated with erosion of 2000 m of the section and by chemical weathering. Three major breaks in Neoproterozoic magmatic activity are recognized: the first, occurred in Cryogenian time, lasted ∼60 million years after the amphibolite facies metamorphism and before emplacement of the calc alkaline plutons, separating the first and the second orogenic phases; the second break between the orogenic and the extensional phases occurred in early Ediacaran time, encompassed ∼20 million years between the emplacement of the calc-alkaline and alkaline plutonic rocks and rhyolite, andesite and the composite dykes; and the third, ∼50 Ma break, occurred between the emplacement of the last felsic intrusions at ∼585 Ma and intrusion of the dolerite dykes in 532 Ma, before the Early Cambrian peneplain developed. The great lateral extension of the Cambrian to Eocene sedimentary rocks and their slow facies and thickness changes suggest a stable flat platform area at the northern tip of the ANS. Early Cambrian sedimentation began with fluviatile subarkoses of the Amudei Shlomo Formation. It was overlain by an Early to Middle Cambrian transgressive-regressive lagoonal cycle of dolostones, sandstones, and siltstones of the Timna Formation. Then Middle Cambrian subarkoses and siltstones of the Shehoret Formation and the quartz arenite of the Netafim Formation were deposited in a coastal, intertidal environment representing the southern transgression of a Cambrian ocean.

WIPP Magnesium Oxide (MgO) - Planned Change Request

EPA Pesticide Factsheets

On April 10, 2006, the DOE submitted a planned change request pertaining to the amount of MgO emplaced in the WIPP repository. MgO is an engineered barrier that DOE included as part of the original WIPP Certification Decision.

40 CFR 148.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) HAZARDOUS WASTE INJECTION RESTRICTIONS General § 148.2 Definitions. Injection interval means that part of the injection zone in which the well is screened, or in which the waste is otherwise directly emplaced...

Evolution and Erosion of Tyrrhena and Hadriaca Paterae, Mars: New Insights from MOC and MOLA

NASA Technical Reports Server (NTRS)

Gregg, T. K. P.; Crown, D. A.; Sakimoto, S. E. H.

2001-01-01

Investigation of Hadriaca and Tyrrhena Paterae, Mars, using MOC and MOLA data reveals new information about caldera formation, channel development, and lava flow-field emplacement. Additional information is contained in the original extended abstract.

Modelling Mass Movements for Planetary Studies

NASA Technical Reports Server (NTRS)

Bulmer, M. H.; Glaze, L.; Barnouin-Jha, O.; Murphy, W.; Neumann, G.

2002-01-01

Use of an empirical model in conjunction with data from the Chaos Jumbles rock avalanches constrain to first order their flow behavior, and provide a method to interpret rock/debris avalanche emplacement on Mars. Additional information is contained in the original extended abstract.

Encapsulated microenergetic material

DOEpatents

Roberts, Jeffery James; Aines, Roger D.; Duoss, Eric B.; Spadaccini, Christopher M.; Vandersall, Kevin S.

2018-02-20

Providing high energy materials that can be placed in previously created fractures and activating them in place to extend or change an existing fracture system. Also detecting the location of fractures or permeable pathways and a means to assess the extent and efficiency of proppant emplacement.

Encapsulated microenergetic material

DOEpatents

Roberts, Jeffery James; Aines, Roger D.; Duoss, Eric B.; Spadaccini, Christopher M.; Vandersall, Kevin S.

2017-02-07

Providing high energy materials that can be placed in previously created fractures and activating them in place to extend or change an existing fracture system. Also detecting the location of fractures or permeable pathways and a means to assess the extent and efficiency of proppant emplacement.

Geomorphic Mapping of Lava Flows on Mars, Earth, and Mercury

NASA Astrophysics Data System (ADS)

Golder, K. B.; Burr, D. M.

2018-06-01

To advance understanding of flood basalts, we have mapped lava flows on three planets, Mars, Earth, and Mercury, as part of three projects. The common purpose of each project is to investigate potential magma sources and/or emplacement conditions.

10 CFR 61.11 - General information.

Code of Federal Regulations, 2010 CFR

2010-01-01

... REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Licenses § 61...) Plans for use of the land disposal facility for purposes other than disposal of radioactive wastes; and..., and first emplacement of waste at the proposed land disposal facility. ...

10 CFR 61.11 - General information.

Code of Federal Regulations, 2012 CFR

2012-01-01

... REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Licenses § 61...) Plans for use of the land disposal facility for purposes other than disposal of radioactive wastes; and..., and first emplacement of waste at the proposed land disposal facility. ...

10 CFR 61.11 - General information.

Code of Federal Regulations, 2011 CFR

2011-01-01

... REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Licenses § 61...) Plans for use of the land disposal facility for purposes other than disposal of radioactive wastes; and..., and first emplacement of waste at the proposed land disposal facility. ...

10 CFR 61.11 - General information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Licenses § 61...) Plans for use of the land disposal facility for purposes other than disposal of radioactive wastes; and..., and first emplacement of waste at the proposed land disposal facility. ...

10 CFR 61.11 - General information.

Code of Federal Regulations, 2014 CFR

2014-01-01

... REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Licenses § 61...) Plans for use of the land disposal facility for purposes other than disposal of radioactive wastes; and..., and first emplacement of waste at the proposed land disposal facility. ...

Magmatism at different crustal levels in the ancient North Cascades magmatic arc

NASA Astrophysics Data System (ADS)

Shea, E. K.; Bowring, S. A.; Miller, R. B.; Miller, J. S.

2013-12-01

The mechanisms of magma ascent and emplacement inferred from study of intrusive complexes have long been the subject of intense debate. Current models favor incremental construction based on integration of field, geochemical, geochronologic, and modeling studies. Much of this work has been focused on a single crustal level. However, study of magmatism throughout the crust is critical for understanding how magma ascends through and intrudes surrounding crustal material. Here, we present new geochronologic and geochemical work from intrusive complexes emplaced at a range of crustal depths in the Cretaceous North Cascades magmatic arc. These complexes were intruded between 92 and 87 Ma at depths of at ≤5 -10 km, ~20 km, and ~25 km during this time. U-Pb CA-TIMS geochronology in zircon can resolve <0.1% differences in zircon dates and when combined with detailed field relationships allow new insights into how magmatic systems are assembled. We can demonstrate highly variable rates of intrusion at different crustal levels: the shallow-crustal (5-10 km) Black Peak intrusive complex was assembled semi-continuously over ~5 My, while the deep-crustal (25-30 km) Tenpeak intrusive complex was assembled in brief, high-flux events over ~2.6 My. Between these bodies is the Seven-Fingered Jack-Entiat intrusive complex, a highly elongate amalgamation of intrusions recording two episodes of magmatism between~92-88 Ma and ~80-77 Ma. Each of these complexes provides a window into crustal processes that occur at different depths. Our data suggest assembly of the Black Peak intrusive complex occurred via a series of small (0.5-2 km2) magmatic increments from ~92 Ma to ~87 Ma. Field relations and zircon trace element geochemistry indicate each of these increments were emplaced and crystallized as closed systems-we find no evidence for mixing between magmas in the complex. However, zircon inheritance becomes more common in younger intrusions, indicating assimilation of older plutonic material, possibly during magma production or transport. The Seven-Fingered Jack intrusive complex, emplaced around 15-20 km, preserves a much more discontinuous record of intrusion than the Black Peak. Our data indicate major magmatism in the complex occurred between ~92.1-91.1 Ma. Inheritance in the Seven-Fingered Jack is common, particularly along contacts between intrusions. The Tenpeak intrusive complex, assembled between ~92 Ma and 89 Ma, represents one of the deepest exhumed complexes in the North Cascades. Our geochronology indicates that plutons comprising the complex were intruded rapidly (<200 ka) and followed by periods of magmatic quiescence. Contact relations between contemporaneous intrusions are often mixed, further supporting rapid assembly. Zircon systematics in the Tenpeak are relatively simple, showing no evidence for inheritance from the surrounding host rock or from earlier intrusions. However, zircon oxygen isotope data indicates many magmas contain significant crustal input. The Black Peak, Seven-Fingered Jack, and Tenpeak intrusions illustrate the complicated nature of magmatism at different crustal levels in the 92-87 Ma North Cascades magmatic arc. Our data support incremental assembly of these complexes, but show that many features, such as style of emplacement, zircon chemical and temporal systematics, and magma composition vary between these intrusions.

REE investigation of the Motru Dyke System components from the Danubian basements (South Carpathians, Romania)

NASA Astrophysics Data System (ADS)

Campeanu, Mara; Balica, Constantin; Balintoni, Ioan; Tănăselia, Claudiu; Cadar, Oana

2017-04-01

Dragsan and Lainici-Paius groups represent the basement components of the Danubian Alpine units (South Carpathians, Romania), which consist of medium-grade metamorphic rocks. A subvolcanic system of dykes (i.e. Motru Dyke System - MDS) crosscut mostly the Lainici Paius basement as an effect of a late-Variscan termo-tectonic event. The geochemical features, frame the MDS components within a wide range of petrotypes (basaltic andesites to rhyolites), and define a wide differentiation series. Classically this subvolcanic system was inferred to be in connection to a unique mantle source [1], however, recent studies [2,3] suggest a mixed mantle-crust source, based on the interpretation of the trace elements in conjunction with Sr and Nd isotope data. Aditionally, the presence of relict zircon grains consolidates this assumption. New REE data collected from eight MDS components, generally confirm the mixed mantle-crust source hypothesis. The distribution patterns reveal two groups of samples. The first group (six samples) is moderately enriched in REE and shows moderately fractionated patterns with (La/Yb)N between 7-21 and low Eu/Eu* (0.81-0.9). The second group, strongly enriched in light REE, have high (La/Yb)N and strong negative Eu anomaly (Eu/Eu* of 0.41 and 0.38 respectively). REE vary between 107-147 ppm for the first group and 612 ppm - 907ppm for the second group. We can assume a stronger fractionation of plagioclase as well as of garnet and amphibole for the second group. With a flatter pattern, for the first group of samples, the fractionation of these minerals appears to be moderate. The emplacement age of MDS has been long disputed, since it was supposed as pre-Silurian for a long time. However, newly zircon U/Pb isotopic dating performed on two collected samples indicate a mean age of 300 My [2,3]. Owing to the croscutting relationships with the post-colisional granitoid plutons emplaced in the Danubian basement during the late Variscan, and based on new geochemical data, we consider that MDS was generated from a mixed mantle and crustal source, and emplaced in a post-collisional tectonic setting during the final stages of the Variscan orogeny. Acknowledgements: study supported by PN-II-ID-PCE-2011-3-0100 Grant, UEFIS-CDI and Core Program - ANCS PN 16.40.02.01. References: [1] Féménias, O., Berza, T., Tatu, M., Diot, H., Demaiffe, D., 2008. Nature and signifiance of a Cambro-Ordovician high-K, calc-alkaline sub-volcanic suite: the late- to post-orogenic Motru Dyke Swarm (Southern Carpathians, Romania), Int. J. Earth Sci. [2] Câmpeanu, M., Balica, C., Balintoni, I.C., 2014. Geochronology and emplacement conditions of Motru Dyke System (South Carpathians, Romania), Bul. Shk. Gjeol.2014- Special Issue, Vol 1/2014, Proceedings of XX CBGA Congress, Tirana, Albania, p.198. [3] Câmpeanu, M., Balica, C., Balintoni, I.C., Tanaselia, C., 2015. Motru Dyke Swarm (South Carpathians, Romania): Emplacement age and geotectonic setting (0) Goldschmidt Abstracts, 2015-459.

Tin Bider Crater (Algeria): New Field Data and Metamorphism Shock

NASA Astrophysics Data System (ADS)

Sahoui, R.; Belhai, D.

2017-07-01

Tin Bider is a 6 km diameter crater emplaced on a sedimentary mixed target rock including sandstones, limestones, shales, gypsum...It is formed by a central pick and two circular rings; where shock effects are defined, as to kinds of breccias.

10 CFR 63.131 - General requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... in situ monitoring, laboratory and field testing, and in situ experiments, as may be appropriate to... REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN A GEOLOGIC REPOSITORY AT YUCCA... conditions encountered and changes in those conditions during construction and waste emplacement operations...

10 CFR 63.131 - General requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... in situ monitoring, laboratory and field testing, and in situ experiments, as may be appropriate to... REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN A GEOLOGIC REPOSITORY AT YUCCA... conditions encountered and changes in those conditions during construction and waste emplacement operations...

10 CFR 63.131 - General requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... in situ monitoring, laboratory and field testing, and in situ experiments, as may be appropriate to... REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN A GEOLOGIC REPOSITORY AT YUCCA... conditions encountered and changes in those conditions during construction and waste emplacement operations...

10 CFR 63.131 - General requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... in situ monitoring, laboratory and field testing, and in situ experiments, as may be appropriate to... REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN A GEOLOGIC REPOSITORY AT YUCCA... conditions encountered and changes in those conditions during construction and waste emplacement operations...

10 CFR 63.131 - General requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... in situ monitoring, laboratory and field testing, and in situ experiments, as may be appropriate to... REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN A GEOLOGIC REPOSITORY AT YUCCA... conditions encountered and changes in those conditions during construction and waste emplacement operations...

Demonstration of close-coupled barriers for subsurface containment of buried waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dwyer, B.P.

1996-05-01

A close-coupled barrier is produced by first installing a conventional cement grout curtain followed by a thin inner lining of a polymer grout. The resultant barrier is a cement polymer composite that has economic benefits derived from the cement and performance benefits from the durable and resistant polymer layer. Close-coupled barrier technology is applicable for final, interim, or emergency containment of subsurface waste forms. Consequently, when considering the diversity of technology application, the construction emplacement and material technology maturity, general site operational requirements, and regulatory compliance incentives, the close-coupled barrier system provides an alternative for any hazardous or mixed wastemore » remediation plan. This paper discusses the installation of a close-coupled barrier and the subsequent integrity verification. The demonstration was installed at a benign site at the Hanford Geotechnical Test Facility, 400 Area, Hanford, Washington. The composite barrier was emplaced beneath a 7,500 liter tank. The tank was chosen to simulate a typical DOE Complex waste form. The stresses induced on the waste form were evaluated during barrier construction. The barrier was constructed using conventional jet grouting techniques. Drilling was completed at a 45{degree} angle to the ground, forming a conical shaped barrier with the waste form inside the cone. Two overlapping rows of cylindrical cement columns were grouted in a honeycomb fashion to form the secondary backdrop barrier layer. The primary barrier, a high molecular weight polymer manufactured by 3M Company, was then installed providing a relatively thin inner liner for the secondary barrier. The primary barrier was emplaced by panel jet grouting with a dual wall drill stem, two phase jet grouting system.« less

Yucca Mountain Project Subsurface Facilities Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

A. Linden; R.S. Saunders; R.J. Boutin

2002-11-19

Four units of the Topopah Springs formation (volcanic tuff) are considered for the proposed repository: the upper lithophysal, the middle non-lithophysal, the lower lithophysal, and the lower non-lithophysal. Yucca Mountain was recently designated the site for a proposed repository to dispose of spent nuclear fuel and high-level radioactive waste. Work is proceeding to advance the design of subsurface facilities to accommodate emplacing waste packages in the proposed repository. This paper summarized recent progress in the design of subsurface layout of the proposed repository. The original Site Recommendation (SR) concept for the subsurface design located the repository largely within the lowermore » lithophysal zone (approximately 73%) of the Topopah The Site Recommendation characterized area suitable for emplacement consisted of the primary upper block, the lower block and the southern upper block extension. The primary upper block accommodated the mandated 70,000 metric tons of heavy metal (MTHM) at a 1.45 kW/m hear heat load. Based on further study of the Site Recommendation concept, the proposed repository siting area footprint was modified to make maximum use of available site characterization data, and thus, reduce uncertainties associated with performance assessment. As a result of this study, a modified repository footprint has been proposed and is presently being review for acceptance by the DOE. A panel design concept was developed to reduce overall costs and reduce the overall emplacement schedule. This concept provides flexibility to adjust the proposed repository subsurface layout with time, as it makes it unnecessary to ''commit'' to development of a large single panel at the earliest stages of construction. A description of the underground layout configuration and influencing factors that affect the layout configuration are discussed in the report.« less

Limited role for thermal erosion by turbulent lava in proximal Athabasca Valles, Mars

PubMed Central

Cataldo, Vincenzo; Williams, David A.; Dundas, Colin M.; Keszthelyi, Laszlo P.

2017-01-01

The Athabasca Valles flood lava is among the most recent (<50 Ma) and best preserved effusive lava flows on Mars and was probably emplaced turbulently. The Williams et al. [2005] model of thermal erosion by lava has been applied to what we term “proximal Athabasca,” the 75 km long upstream portion of Athabasca Valles. For emplacement volumes of 5000 and 7500 km3 and average flow thicknesses of 20 and 30 m, the duration of the eruption varies between ~11 and ~37 days. The erosion of the lava flow substrate is investigated for three eruption temperatures (1270°C, 1260°C, and 1250°C), and volatile contents equivalent to 0–65 vol% bubbles. The largest erosion depths of ~3.8–7.5 m are at the lava source, for 20 m thick and bubble-free flows that erupted at their liquidus temperature (1270°C). A substrate containing 25 vol% ice leads to maximum erosion. A lava temperature 20°C below liquidus reduces erosion depths by a factor of ~2.2. If flow viscosity increases with increasing bubble content in the lava, the presence of 30–50 vol % bubbles leads to erosion depths lower than those relative to bubble-free lava by a factor of ~2.4. The presence of 25 vol % ice in the substrate increases erosion depths by a factor of 1.3. Nevertheless, modeled erosion depths, consistent with the emplacement volume and flow duration constraints, are far less than the depth of the channel (~35–100 m). We conclude that thermal erosion does not appear to have had a major role in excavating Athabasca Valles. PMID:29082120

Evidence for post-1620 Ma Proterozoic regional deformation, Lucy Gray Range, southern Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duebendorfer, E.M.; Christensen, C.H.; Shafiqullah, M.

1993-04-01

Major mylonite zones in the northern Lucy Gray Range, Nevada, deform and are spatially associated with the 1,425 Ma Beer Bottle Pass pluton, Mylonitic granite yielded a K-Ar biotite date of 1,400 [+-] 30 Ma and is overlain nonconformably by the Cambrian Tapeats Sandstone, thus constraining deformation to the Proterozoic. The mylonites may therefore represent an unrecognized period of Proterozoic deformation in the Southwest. Field and microstructural studies were undertaken to evaluate between 3 possible models for the apparent spatial association of granite and mylonites: (1) deformation directly related to pluton emplacement (ballooning); (2) synkinematic pluton emplacement; or (3) post-emplacementmore » deformation. Mylonite zones up to 50 meters thick strike north to northeast, dip moderately to steeply northwest, and contain a remarkably consistent west-plunging mineral lineation. Mylonites are present locally at the granite-wall rock contact; however, less than 30% of the exposed contact is mylonitic. The authors reject a pluton-emplacement origin for the mylonites because (1) mylonite zones within wall rocks locally strike at high angles to an undeformed pluton-wall rock contact, (2) the consistent (pluton-side-down) shear sense is more compatible with a uniform-sense simple shear zone than a ballooning pluton, (3) plane strain fabrics dominate over flattening fabrics, and (4) mylonites adjacent to pluton contacts lack annealing textures predicted by the ballooning model. If so, the conventional interpretation of 1,400 Ga granitoids as anorogenic may need to be re-evaluated. The authors cannot, however, rule out the possibility that the mylonites completely postdate intrusion of the Beer Bottle Pass pluton. Future work is planned to delimit the regional extent of this previously unrecognized Proterozoic deformational event.« less

Uranium-234 anomalies in authigenic uranium as a new oxygenation proxy in the Southern Ocean

NASA Astrophysics Data System (ADS)

Hayes, C. T.; Severmann, S.; Anderson, A.

2016-12-01

Authigenic uranium (aU) is a sensitive indicator for suboxic conditions in marine pore waters that has been used to reconstruct past oxygenation conditions or organic matter export. aU suffers, however, from possible post-depositional remobilization or "burn-down" when the depth of the oxygenation front in the sediments undergoes rapid changes. In terms of isotope composition, the 234U/238U activity ratio, or δ234U in per mil notation, of authigenic U will reflect the isotope ratio in seawater (147‰) which has been relatively stable (within 15‰) for at least one ocean residence time of U (about 400 kyr). The δ234U ratio in bulk marine sediments should then reflect the mixture of the seawater ratio and the ratio of detrital U (0‰ or somewhat negative). In careful analysis of bulk δ234U over a peak in aU from Southern Ocean core ODP-1094, I found ratios higher than seawater (up to 250‰), not explainable by isotope mixing of known sources. I propose a new diagenetic effect in which a partial reoxidation of an aU emplacement can cause 234U that has been alpha-recoiled from in-situ 238U decay to diffuse into the aU emplacement. This means that with aU records that may be slightly altered by reoxidation, careful tracking of δ234U will allow proper identification of the depth/size of the original aU emplacement. Therefore, δ234U of aU is a more robust redox tracer than elemental proxies alone. In this presentation, I will recount the evidence for this assertion and lay out future research targets.

Lunar Limb Observatory: An Incremental Plan for the Utilization, Exploration, and Settlement of the Moon

NASA Technical Reports Server (NTRS)

Lowman, Paul. D., Jr.

1996-01-01

This paper proposes a comprehensive incremental program, Lunar Limb Observatory (LLO), for a return to the Moon, beginning with robotic missions and ending with a permanent lunar settlement. Several recent technological developments make such a program both affordable and scientifically valuable: robotic telescopes, the Internet, light-weight telescopes, shared- autonomy/predictive graphics telerobotic devices, and optical interferometry systems. Reasons for focussing new NASA programs on the Moon include public interest, Moon-based astronomy, renewed lunar exploration, lunar resources (especially helium-3), technological stimulus, accessibility of the Moon (compared to any planet), and dispersal of the human species to counter predictable natural catastrophes, asteroidal or cometary impacts in particular. The proposed Lunar Limb Observatory would be located in the crater Riccioli, with auxiliary robotic telescopes in M. Smythii and at the North and South Poles. The first phase of the program, after site certification, would be a series of 5 Delta-launched telerobotic missions to Riccioli (or Grimaldi if Riccioli proves unsuitable), emplacing robotic telescopes and carrying out surface exploration. The next phase would be 7 Delta-launched telerobotic missions to M. Smythii (2 missions), the South Pole (3 missions), and the North Pole (2 missions), emplacing robotic telescopes to provide continuous all-sky coverage. Lunar base establishment would begin with two unmanned Shuttle/Fitan-Centaur missions to Riccioli, for shelter emplacement, followed by the first manned return, also using the Shuttle/Fitan-Centaur mode. The main LLO at Riccioli would then be permanently or periodically inhabited, for surface exploration, telerobotic rover and telescope operation and maintenance, and support of Earth-based student projects. The LLO would evolve into a permanent human settlement, serving, among other functions, as a test area and staging base for the exploration, settlement, and terraforming of Mars.

Syn-extensional emplacement of the 1. 42 Ga Sandia Granite, N. M

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karlstrom, K.E.; Kirby, E.; Andronicos, C.

1993-02-01

The 1.42 Ga Sandia pluton is one of a suite of Middle Proterozoic granitoid intrusions exposed in northern New Mexico. It crops out over 420 km[sup 2] in the Sandia Mountains, just east of Albuquerque. Recent structural work indicates that the pluton was emplaced syntectonically with respect to a transtensional ductile shear zone on its southeastern side. The shear zone is 1-2 km wide, dips 60[degree] NW under the pluton, and is thus inferred to be a deformed base or lower side of the pluton. From NW to SE, a transect across the zone consists of (1) essentially undeformed, locallymore » flow-foliated Sandia pluton (megacrystic monzogranite); (2) mylonitic, augen orthogneiss that is clearly sheared Sandia pluton; its matrix is depleted in quartz and K-feldspar and enriched in biotite relative to the undeformed pluton; (3) Cibola granite - a 1 km wide zone of fine to coarse grained, equigranular, leucocratic granite; (4) the Tijeras Fault - a Phanerozoic brittle fault; (5) the Tijeras Greenstone - unsheared amphibolite and interlayered pelitic schist and quartzite. Field and microstructural relationships indicate that pluton crystallization was synchronous with shear zone movements. Shear zone movement is interpreted to have punctuated segregation of evolved melts during fractional crystallization of the magma. Geochemical data show linear trends in major and trace elements, with compositional gaps between the main pluton and leucocratic phases. Strain studies suggest that the biotite-rich mylonitic augen orthogneiss records significant volume loss in the matrix. Melts presumably were drawn down pressure gradients into the active shear zone after the main unit was 50--70% crystallized. Further work is required to constrain whether extension was related to regional deformation or only to pluton emplacement.« less

Post-depositional fracturing and subsidence of pumice flow deposits: Lascar Volcano, Chile.

PubMed

Whelley, Patrick L; Jay, J; Calder, E S; Pritchard, M E; Cassidy, N J; Alcaraz, S; Pavez, A

Unconsolidated pyroclastic flow deposits of the 1993 eruption of Lascar Volcano, Chile, have, with time, become increasingly dissected by a network of deeply penetrating fractures. The fracture network comprises orthogonal sets of decimeter-wide linear voids that form a pseudo-polygonal grid visible on the deposit surface. In this work, we combine shallow surface geophysical imaging tools with remote sensing observations and direct field measurements of the deposit to investigate these fractures and their underlying causal mechanisms. Based on ground penetrating radar images, the fractures are observed to have propagated to depths of up to 10 m. In addition, orbiting radar interferometry shows that deposit subsidence of up to 1 cm/year -1 occurred between 1993 and 1996 with continued subsidence occurring at a slower rate thereafter. In situ measurements show that 1 m below the surface, the 1993 deposits remain 5°C to 15°C hotter, 18 years after emplacement, than adjacent deposits. Based on the observed subsidence as well as estimated cooling rates, the fractures are inferred to be the combined result of deaeration, thermal contraction, and sedimentary compaction in the months to years following deposition. Significant environmental factors, including regional earthquakes in 1995 and 2007, accelerated settling at punctuated moments in time. The spatially variable fracture pattern relates to surface slope and lithofacies variations as well as substrate lithology. Similar fractures have been reported in other ignimbrites but are generally exposed only in cross section and are often attributed to formation by external forces. Here we suggest that such interpretations should be invoked with caution, and deformation including post-emplacement subsidence and fracturing of loosely packed ash-rich deposits in the months to years post-emplacement is a process inherent in the settling of pyroclastic material.

Insights into the emplacement of upper-crustal plutons and their relationship to large silicic calderas, from field relationships, geochronology, and zircon trace element geochemistry in the Stillwater - Clan Alpine caldera complex, western Nevada, USA

NASA Astrophysics Data System (ADS)

Colgan, Joseph P.; John, David A.; Henry, Christopher D.; Watts, Kathryn E.

2018-01-01

Geologic mapping, new U-Pb zircon ages, and new and published 40Ar/39Ar sanidine ages document the timing and extent of Oligocene magmatism in the southern Stillwater Range and Clan Alpine Mountains of western Nevada, where Miocene extension has exposed at least six nested silicic calderas and underlying granitic plutons to crustal depths locally ≥ 9 km. Both caldera-forming rhyolitic tuffs and underlying plutons were emplaced in two episodes, one from about 30.4-28.2 Ma that included the Deep Canyon, Job Canyon, and Campbell Creek calderas and underlying plutons, and one from about 25.3-24.8 Ma that included the Louderback Mountains, Poco Canyon, and Elevenmile Canyon calderas and underlying plutons. In these two 1-2 m.y. periods, almost the entire Mesozoic upper crust was replaced by Oligocene intrusive and extrusive rocks to depths ≥ 9 km over an estimated total area of 1500 km2 (pre-extension). Zircon trace element geochemistry indicates that some plutonic rock can be solidified residual magma from the tuff eruptions. Most plutons are not solidified residual magma, although they directly underlie calderas and were emplaced along the same structures shortly after to as much as one million years after caldera formation. Magma chambers and plutons grew by floor subsidence accommodated by downward transfer of country rocks. If other Great Basin calderas are similar, the dense concentration of shallowly exposed calderas in central Nevada is underlain by a complexly zoned mid-Cenozoic batholith assembled in discrete pulses that coincided with formation of large silicic calderas up to 2500-5000 km3.

Limited role for thermal erosion by turbulent lava in proximal Athabasca Valles, Mars

USGS Publications Warehouse

Cataldo, Vincenzo; Williams, David A.; Dundas, Colin M.; Kestay, Laszlo P.

2015-01-01

The Athabasca Valles flood lava is among the most recent (<50 Ma) and best preserved effusive lava flows on Mars and was probably emplaced turbulently. The Williams et al. (2005) model of thermal erosion by lava has been applied to what we term “proximal Athabasca,” the 75 km long upstream portion of Athabasca Valles. For emplacement volumes of 5000 and 7500 km3and average flow thicknesses of 20 and 30 m, the duration of the eruption varies between ~11 and ~37 days. The erosion of the lava flow substrate is investigated for three eruption temperatures (1270°C, 1260°C, and 1250°C), and volatile contents equivalent to 0–65 vol % bubbles. The largest erosion depths of ~3.8–7.5 m are at the lava source, for 20 m thick and bubble-free flows that erupted at their liquidus temperature (1270°C). A substrate containing 25 vol % ice leads to maximum erosion. A lava temperature 20°C below liquidus reduces erosion depths by a factor of ~2.2. If flow viscosity increases with increasing bubble content in the lava, the presence of 30–50 vol % bubbles leads to erosion depths lower than those relative to bubble-free lava by a factor of ~2.4. The presence of 25 vol % ice in the substrate increases erosion depths by a factor of 1.3. Nevertheless, modeled erosion depths, consistent with the emplacement volume and flow duration constraints, are far less than the depth of the channel (~35–100 m). We conclude that thermal erosion does not appear to have had a major role in excavating Athabasca Valles.

Multistage magma emplacement and progressive strain accumulation in the shallow-level Krkonoše-Jizera plutonic complex, Bohemian Massif

NASA Astrophysics Data System (ADS)

Žák, Jiří; Verner, Kryštof; Sláma, Jiří; Kachlík, Václav; Chlupáčová, Marta

2013-09-01

relationships combined with new U-Pb zircon geochronology suggest that the shallow-level Krkonoše-Jizera plutonic complex, northern Bohemian Massif, was assembled successively from bottom to top, starting with emplacement of the separately evolved S-type Tanvald granite (317.3 ± 2.1 Ma), followed by at least two voluminous batches of the I-type porphyritic Liberec (319.5 ± 2.3 Ma) and Jizera (320.1 ± 3.0 Ma and 319.3 ± 3.7 Ma) granites. The intrusive sequence was completed by uppermost, minor intrusions of the equigranular Harrachov (315.0 ± 2.7 Ma) and Krkonoše granites. The I-type granites exhibit an unusually complex pattern of superposed feldspar phenocryst and magnetic fabrics as revealed from the anisotropy of magnetic susceptibility (AMS). The outer Liberec granite preserves margin-parallel foliations and lineations, interpreted to record emplacement-related strain captured by cooling from the pluton floor and walls. In contrast, the inner Jizera, Harrachov, and Krkonoše granites were overprinted by synmagmatic strain resulting from dextral movements along regional strike-slip faults cutting the opposite ends of the plutonic complex. Late-stage felsic dikes in the Liberec and Jizera granites reorient from horizontal to vertical (lineation-perpendicular) attitude in response to changing the least principal stress direction, whereas mafic schlieren do not do so, representing only randomly oriented small-scale thermal-mechanical instabilities in the phenocryst framework. In general, this case example challenges the common approach of inferring pluton-wide magma flow from interpolated foliation, lineation, and schlieren patterns. More likely, magmatic fabrics in large plutons record complex temporal succession of superposed strains resulting from diverse processes at multiple scales.

Lunar Limb Observatory: an Incremental Plan for the Utilization, Exploration, and Settlement of the Moon

NASA Astrophysics Data System (ADS)

Lowman, Paul. D., Jr.

1996-10-01

This paper proposes a comprehensive incremental program, Lunar Limb Observatory (LLO), for a return to the Moon, beginning with robotic missions and ending with a permanent lunar settlement. Several recent technological developments make such a program both affordable and scientifically valuable: robotic telescopes, the Internet, light-weight telescopes, shared- autonomy/predictive graphics telerobotic devices, and optical interferometry systems. Reasons for focussing new NASA programs on the Moon include public interest, Moon-based astronomy, renewed lunar exploration, lunar resources (especially helium-3), technological stimulus, accessibility of the Moon (compared to any planet), and dispersal of the human species to counter predictable natural catastrophes, asteroidal or cometary impacts in particular. The proposed Lunar Limb Observatory would be located in the crater Riccioli, with auxiliary robotic telescopes in M. Smythii and at the North and South Poles. The first phase of the program, after site certification, would be a series of 5 Delta-launched telerobotic missions to Riccioli (or Grimaldi if Riccioli proves unsuitable), emplacing robotic telescopes and carrying out surface exploration. The next phase would be 7 Delta-launched telerobotic missions to M. Smythii (2 missions), the South Pole (3 missions), and the North Pole (2 missions), emplacing robotic telescopes to provide continuous all-sky coverage. Lunar base establishment would begin with two unmanned Shuttle/Fitan-Centaur missions to Riccioli, for shelter emplacement, followed by the first manned return, also using the Shuttle/Fitan-Centaur mode. The main LLO at Riccioli would then be permanently or periodically inhabited, for surface exploration, telerobotic rover and telescope operation and maintenance, and support of Earth-based student projects. The LLO would evolve into a permanent human settlement, serving, among other functions, as a test area and staging base for the exploration, settlement, and terraforming of Mars.

Kaguyak dome field and its Holocene caldera, Alaska Peninsula

USGS Publications Warehouse

Fierstein, J.; Hildreth, W.

2008-01-01

Kaguyak Caldera lies in a remote corner of Katmai National Park, 375??km SW of Anchorage, Alaska. The 2.5-by-3-km caldera collapsed ~ 5.8 ?? 0.2??ka (14C age) during emplacement of a radial apron of poorly pumiceous crystal-rich dacitic pyroclastic flows (61-67% SiO2). Proximal pumice-fall deposits are thin and sparsely preserved, but an oxidized coignimbrite ash is found as far as the Valley of Ten Thousand Smokes, 80??km southwest. Postcaldera events include filling the 150-m-deep caldera lake, emplacement of two intracaldera domes (61.5-64.5% SiO2), and phreatic ejection of lakefloor sediments onto the caldera rim. CO2 and H2S bubble up through the lake, weakly but widely. Geochemical analyses (n = 148), including pre-and post-caldera lavas (53-74% SiO2), define one of the lowest-K arc suites in Alaska. The precaldera edifice was not a stratocone but was, instead, nine contiguous but discrete clusters of lava domes, themselves stacks of rhyolite to basalt exogenous lobes and flows. Four extracaldera clusters are mid-to-late Pleistocene, but the other five are younger than 60??ka, were truncated by the collapse, and now make up the steep inner walls. The climactic ignimbrite was preceded by ~ 200??years by radial emplacement of a 100-m-thick sheet of block-rich glassy lava breccia (62-65.5% SiO2). Filling the notches between the truncated dome clusters, the breccia now makes up three segments of the steep caldera wall, which beheads gullies incised into the breccia deposit prior to caldera formation. They were probably shed by a large lava dome extruding where the lake is today.

Martian impact crater ejecta morphologies and their potential as indicators of subsurface volatile distribution

NASA Technical Reports Server (NTRS)

Barlow, Nadine G.

1991-01-01

Many martian impact craters ejecta morphologies suggestive of fluidization during ejecta emplacement. Impact into subsurface volatile reserviors (i.e., water, ice, CO2, etc.) is the mechanism favored by many scientists, although acceptance of this mechanism is not unanimous. In recent years, a number of studies were undertaken to better understand possible relationships between ejecta morphology and latitude, longitude, crater diameter, and terrain. These results suggest that subsurface volatiles do influence the formation of specific ejecta morphologies and may provide clues to the vertical and horizontal distribution of volatiles in more localized regions of Mars. The location of these volatile reservoirs will be important to humans exploring and settling Mars in the future. Qualitative descriptions of ejecta morphology and quantitative analyses of ejecta sinuosity and ejecta lobe areal extent from the basis of the studies. Ejecta morphology studies indicate that morphology is correlated with crater diameter and latitude, and, using depth-diameter relationships, these correlations strongly suggest that changes in morphology are related to transition among subsurface layers with varying amounts of volatiles. Ejecta sinuosity studies reveal correlations between degree of sinuosity (lobateness) and crater morphology, diameter, latitude, and terrain. Lobateness, together with variations in areal extent of the lobate ejecta blanket with morphology and latitude, probably depends most directly on the ejecta emplacement process. The physical parameters measured here can be compared with those predicted by existing ejecta emplacement models. Some of these parameters are best reproduced by models requiring incorporation of volatiles within the ejecta. However, inconsistencies between other parameters and the models indicate that more detailed modeling is necessary before the location of volatile reservoirs can be confidently predicted based on ejecta morphology studies alone.

Multiple Emplacement and Exhumation History of the Late Mesozoic Dayunshan-Mufushan Batholith in Southeast China and Its Tectonic Significance: 2. Magnetic Fabrics and Gravity Survey

NASA Astrophysics Data System (ADS)

Ji, Wenbin; Chen, Yan; Chen, Ke; Wei, Wei; Faure, Michel; Lin, Wei

2018-01-01

The Late Mesozoic magmatic province is a prominent feature of the South China Block (SCB). However, the tectonic regimes associated with the magmatism are still elusive. A combined anisotropy of magnetic susceptibility and gravity study has been carried out to determine the fabric patterns and shape at depth of the Dayunshan-Mufushan composite batholith in the north-central SCB. This is a companion paper to Part 1 that presented the structural and geochronological data of this batholith. The magnetic fabrics in the batholith interior predominantly reflect magma flow structures. Two distinct patterns of the magnetic lineations are defined, around NNE-SSW and WNW-ESE trends for the early-stage and late-stage intrusions of the batholith, respectively. The gravity survey reveals that the early-stage intrusion has a main feeder zone located below its northern part, while several linear feeder zones trending NNE-SSW are inferred for the late-stage intrusion. Integrating all results, a two-stage construction of the batholith with distinct tectonic regimes has been established. It is concluded that the early-stage intrusion experienced a southward magma transport during its emplacement, partially assisted by far-field compression from the north at ca. 150 Ma. Conversely, the emplacement and exhumation of the late-stage intrusion was accommodated by a NW-SE crustal stretching involving a lateral magma expansion above the multiple feeder zones (likely corresponding to extensional fractures) and ductile shearing during 132-95 Ma localized mainly along the Dayunshan detachment fault. Finally, we discuss the geodynamic linkage between the paleo-Pacific subduction and the Late Mesozoic tectonomagmatism in the SCB.

Magnetic fabric and flow direction in the Ediacaran Imider dyke swarms (Eastern Anti-Atlas, Morocco), inferred from the Anisotropy of Magnetic Susceptibility (AMS)

NASA Astrophysics Data System (ADS)

Otmane, Khadija; Errami, Ezzoura; Olivier, Philippe; Berger, Julien; Triantafyllou, Antoine; Ennih, Nasser

2018-03-01

Located in the Imiter Inlier (Eastern Saghro, Anti-Atlas, Morocco), Ediacaran volcanic dykes have been studied for their petrofabric using Anisotropy of Magnetic Susceptibility (AMS) technique. Four dykes, namely TF, TD, FF and FE show andesitic compositions and are considered to belong to the same dyke swarm. They are oriented respectively N25E, N40E, N50E, and N10E and have been emplaced during a first tectonic event. The dyke FW, oriented N90E displays a composition of alkali basalt and its emplacement is attributed to a subsequent tectonic event. These rocks are propylitized under greenschist facies conditions forming a secondary paragenesis constituted by calcite, chlorite, epidote and sericite. The dykes TF, TD, FF and FE are sub-volcanic calc-alkaline, typical of post-collisional basalts/andesites, belonging to plate margin andesites. The FW dyke shows a within-plate basalt signature; alkaline affinity reflecting a different petrogenetic process. The thermomagnetic analyses show a dominantly ferromagnetic behaviour in the TF dyke core carried by single domain Ti-poor magnetite, maghemite and pyrrhotite. The dominantly paramagnetic susceptibilities in TF dyke rims and TD, FE, FF and FW dykes are controlled by ilmenite, amphibole, pyroxene and chlorite. The magnetic fabrics of the Imider dykes, determined by our AMS study, allows us to reconstitute the tectonic conditions which prevailed during the emplacement of these two generations of volcanic dykes. The first tectonic event was characterized by a roughly NE-SW compression and the second tectonic event is characterized by an E-W shortening followed by a relaxation recording the end of the Pan-African orogeny in the eastern Anti-Atlas.

Thermal history of volcanic debris flow deposits on the eastern flanks of Mt. Taranaki, New Zealand: Implications for future hazards

NASA Astrophysics Data System (ADS)

Turner, Gillian M.; Alloway, Brent V.; Dixon, Benjamin J.; Atkins, Cliff B.

2018-03-01

We use palaeomagnetic methods to decipher the thermal histories of a succession of massive to weakly stratified debris flow deposits (Ngatoro and Te Popo formations) of late Holocene age located on the eastern lower flanks of Mt. Taranaki/Egmont Volcano, western North Island, New Zealand. Results from two sites, Vickers Quarry and Surrey Road Quarry, both c. 9.6 km from the present-day summit, enable us to distinguish between clast incorporation temperatures of about 400 °C and emplacement temperatures between 150 and 200 °C, consistent with observation of superficial charring and desiccation of outer podocarp-hardwood tree trunks at Vickers Quarry. Analysis of palaeomagnetic directions and lithofacies architecture suggest that these deposits were likely initiated as a closely-spaced succession of block-and-ash flows (BAFs) that rapidly cooled as they descended the volcano flanks. Radiocarbon chronology and the widespread occurrence of a palaeosol between the products of the preceding Inglewood eruptive phase, c. 3.4 cal. ka B.P., and the overlying Ngatoro Formation suggest that these two events are temporally unrelated. Certainly, there is no field evidence of contemporaneous explosive volcanic activity that might be related to the emplacement of Ngatoro Formation. However, we suggest that these low-temperature deposits might either relate to collapse of a small emergent lava dome or a cooling dome remnant, possibly emplaced in the aftermath of the Inglewood eruption. How collapse was initiated remains uncertain: the remnant dome may have been rendered unstable by volcano-tectonic or tectonic seismic events and/or by adverse meteorological events. Nevertheless, this study demonstrates that edifice collapse events generating potentially hazardous debris flows can occur independent of specific eruptive activity.

Terrestrial analogues for lunar impact melt flows

NASA Astrophysics Data System (ADS)

Neish, C. D.; Hamilton, C. W.; Hughes, S. S.; Nawotniak, S. Kobs; Garry, W. B.; Skok, J. R.; Elphic, R. C.; Schaefer, E.; Carter, L. M.; Bandfield, J. L.; Osinski, G. R.; Lim, D.; Heldmann, J. L.

2017-01-01

Lunar impact melt deposits have unique physical properties. They have among the highest observed radar returns at S-Band (12.6 cm wavelength), implying that they are rough at the decimeter scale. However, they are also observed in high-resolution optical imagery to be quite smooth at the meter scale. These characteristics distinguish them from well-studied terrestrial analogues, such as Hawaiian pāhoehoe and ´a´ā lava flows. The morphology of impact melt deposits can be related to their emplacement conditions, so understanding the origin of these unique surface properties will help to inform us as to the circumstances under which they were formed. In this work, we seek to find a terrestrial analogue for well-preserved lunar impact melt flows by examining fresh lava flows on Earth. We compare the radar return and high-resolution topographic variations of impact melt flows to terrestrial lava flows with a range of surface textures. The lava flows examined in this work range from smooth Hawaiian pāhoehoe to transitional basaltic flows at Craters of the Moon (COTM) National Monument and Preserve in Idaho to rubbly and spiny pāhoehoe-like flows at the recent eruption at Holuhraun in Iceland. The physical properties of lunar impact melt flows appear to differ from those of all the terrestrial lava flows studied in this work. This may be due to (a) differences in post-emplacement modification processes or (b) fundamental differences in the surface texture of the melt flows due to the melts' unique emplacement and/or cooling environment. Information about the surface properties of lunar impact melt deposits will be critical for future landed missions that wish to sample these materials.

Emplacement mechanisms of the South Kona slide complex, Hawaii Island: Sampling and observations by remotely operated vehicle Kaiko

USGS Publications Warehouse

Yokose, H.; Lipman, P.W.

2004-01-01

Emplacement of a giant submarine slide complex, offshore of South Kona, Hawaii Island, was investigated in 2001 by visual observation and in-situ sampling on the bench scarp and a megablock, during two dives utilizing the Remotely Operated Vehicle (ROV) Kaiko and its mother ship R/V Kairei. Topography of the bench scarp and megablocks were defined in 3-D perspective, using high-resolution digital bathymetric data acquired during the cruise. Compositions of 34 rock samples provide constraints on the landslide source regions and emplacement mechanisms. The bench scarp consists mainly of highly fractured, vesiculated, and oxidized a-a lavas that slumped from the subaerial flank of ancestral Mauna Loa. The megablock contains three units: block facies, matrix facies, and draped sediment. The block facies contains hyaloclastite interbedded with massive lava, which slid from the shallow submarine flank of ancestral Mauna Loa, as indicated by glassy groundmass of the hyaloclastite, low oxidation state, and low sulfur content. The matrix facies, which directly overlies the block facies and is similar to a lahar deposit, is thought to have been deposited from the water column immediately after the South Kona slide event. The draped sediment is a thin high-density turbidite layer that may be a distal facies of the Alika-2 debris-avalanche deposit; its composition overlaps with rocks from subaerial Mauna Loa. The deposits generated by the South Kona slide vary from debris avalanche deposit to turbidite. Spatial distribution of the deposits is consistent with deposits related to large landslides adjacent to other Hawaiian volcanoes and the Canary Islands. ?? Springer-Verlag 2004.

Ries Bunte Breccia revisited: Indications for the presence of water in Itzing and Otting drill cores and implications for the emplacement process

NASA Astrophysics Data System (ADS)

Pietrek, Alexa; Kenkmann, Thomas

2016-07-01

We reassessed two drill cores of the Bunte Breccia deposits of the Ries crater, Germany. The objectives of our study were the documentation of evidence for water in the Bunte Breccia, the evaluation of how that water influenced the emplacement processes, and from which preimpact water reservoir it was derived. The Bunte Breccia in both cores can be structured into a basal layer composed mainly of local substrate material, overlain by texturally and compositionally diverse, crater-derived breccia units. The basal layer is composed of the youngest sediments (Tertiary clays and Upper Jurassic limestone) and has a razor-sharp boundary to the upper breccia units, which are composed of older rocks of Upper Jurassic to Upper Triassic age. Sparse material exchange occurred between the basal layer and the rest of the Bunte Breccia. Fluids predominantly came from the Tertiary and the Upper Triassic sandstone formation. In the basal layer, Tertiary clays were subjected to intense, ductile deformation, indicating saturation with water. This suggests that water was mixed into the matrix, creating a fluidized basal layer with a strong shear localization. In the upper units, Upper Triassic sandstones are intensely deformed by granular flow. The texture requires that the rocks were disaggregated into granular sand. Vaporization of pore water probably aided fragmentation of these rocks. In the Otting core, hot suevite (T > 600 °C) covered the Bunte Breccia shortly after its emplacement. Vertically oriented gas escape pipes in suevite partly emanate directly at the contact to the Bunte Breccia. They indicate that the Bunte Breccia contained a substantial amount of water in the upper part that was vaporized and escaped through these vents.

Differences in Landsat TM derived lava flow thermal structures during summit and flank eruption at Mount Etna

NASA Astrophysics Data System (ADS)

Lombardo, V.; Buongiorno, M. F.; Pieri, D.; Merucci, L.

2004-06-01

The simultaneous solution of the Planck equation (the so-called "dual-band" technique) for two shortwave infrared Landsat Thematic Mapper (TM) bands allows an estimate of the fractional area of the hottest part of an active flow and the temperature of the cooler crust. Here, the dual-band method has been applied to a time series of Mount Etna eruptions. The frequency distribution of the fractional area of the hottest component reveals specific differences between summit and flank lava flows. The shape of the density function shows a trend consistent with a Gaussian distribution and suggests a relationship between the moments of the distribution and the emplacement environment. Because flow composition of Etnean lavas generally remains constant during the duration of their emplacement, it appears that the shape of any particular frequency distribution is probably related to fluid mechanical aspects of flow emplacement that affect flow velocity and flow heat loss and thus the rate of formation of the surface crust. These factors include the influence of topographical features such as changes in slope gradient, changes in volume effusion rate, and progressive downflow increases in bulk or effective viscosity. A form of the general theoretical solution for the 'dual-band' system, which illustrates the relationship between radiance in TM bands 5 and 7, corresponding to hot fractional area and crust temperature, is presented. Generally speaking, it appears that for a given flow at any point in time, larger fractional areas of exposed hot material are correlated with higher temperatures and that, while the overall shape of that distribution is common for the flows studied, its amplitude and slope reflect individual flow rheological regimes.

Mapping Emplaced Articulated Concrete Mattress Using Geoelectrical and Electromagnetic Techniques.

DTIC Science & Technology

1998-08-01

4 Articulated Concrete Mattress ........................... 4 Test Sites . ........................................ 5 3- Self -Potential M ethod...7 Self -Potential Theory . ................................ 7 Calculation of Self -Potential Response Profiles...45 Figures 1-53 Appendix A: Phase II Report - Investigation of Articulated Concrete Mattress Using Self -Potential and

SURFACTANT ENHANCED REMEDIATION OF SOIL COLUMNS CONTAMINATED BY RESIDUAL TETRACHLOROETHYLENE

EPA Science Inventory

The ability of aqueous surfactant solutions to recover tetrachloroethylene (PCE) entrapped in Ottawa sand was evaluated in four column experiments. Residual PCE was emplaced by injecting ¹⁴C-labeled PCE into water-saturated soil columns and displacing the free product ...

U–Pb geochronology documents out-of-sequence emplacement of ultramafic layers in the Bushveld Igneous Complex of South Africa

PubMed Central

Mungall, James E.; Kamo, Sandra L.; McQuade, Stewart

2016-01-01

Layered intrusions represent part of the plumbing systems that deliver vast quantities of magma through the Earth's crust during the formation of large igneous provinces, which disrupt global ecosystems and host most of the Earth's endowment of Pt, Ni and Cr deposits. The Rustenburg Layered Suite of the enormous Bushveld Igneous Complex of South Africa has been presumed to have formed by deposition of crystals at the floor of a subterranean sea of magma several km deep and hundreds of km wide called a magma chamber. Here we show, using U–Pb isotopic dating of zircon and baddeleyite, that individual chromitite layers of the Rustenburg Layered Suite formed within a stack of discrete sheet-like intrusions emplaced and solidified as separate bodies beneath older layers. Our U–Pb ages and modelling necessitate reassessment of the genesis of layered intrusions and their ore deposits, and challenge even the venerable concept of the magma chamber itself. PMID:27841347

Results and analysis of saltstone cores taken from saltstone disposal unit cell 2A

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reigel, M. M.; Hill, K. A.

2016-03-01

As part of an ongoing Performance Assessment (PA) Maintenance Plan, Savannah River Remediation (SRR) has developed a sampling and analyses strategy to facilitate the comparison of field-emplaced samples (i.e., saltstone placed and cured in a Saltstone Disposal Unit (SDU)) with samples prepared and cured in the laboratory. The primary objectives of the Sampling and Analyses Plan (SAP) are; (1) to demonstrate a correlation between the measured properties of laboratory-prepared, simulant samples (termed Sample Set 3), and the field-emplaced saltstone samples (termed Sample Set 9), and (2) to validate property values assumed for the Saltstone Disposal Facility (SDF) PA modeling. Themore » analysis and property data for Sample Set 9 (i.e. six core samples extracted from SDU Cell 2A (SDU2A)) are documented in this report, and where applicable, the results are compared to the results for Sample Set 3. Relevant properties to demonstrate the aforementioned objectives include bulk density, porosity, saturated hydraulic conductivity (SHC), and radionuclide leaching behavior.« less

Steerable sound transport in a 3D acoustic network

NASA Astrophysics Data System (ADS)

Xia, Bai-Zhan; Jiao, Jun-Rui; Dai, Hong-Qing; Yin, Sheng-Wen; Zheng, Sheng-Jie; Liu, Ting-Ting; Chen, Ning; Yu, De-Jie

2017-10-01

Quasi-lossless and asymmetric sound transports, which are exceedingly desirable in various modern physical systems, are almost always based on nonlinear or angular momentum biasing effects with extremely high power levels and complex modulation schemes. A practical route for the steerable sound transport along any arbitrary acoustic pathway, especially in a three-dimensional (3D) acoustic network, can revolutionize the sound power propagation and the sound communication. Here, we design an acoustic device containing a regular-tetrahedral cavity with four cylindrical waveguides. A smaller regular-tetrahedral solid in this cavity is eccentrically emplaced to break spatial symmetry of the acoustic device. The numerical and experimental results show that the sound power flow can unimpededly transport between two waveguides away from the eccentric solid within a wide frequency range. Based on the quasi-lossless and asymmetric transport characteristic of the single acoustic device, we construct a 3D acoustic network, in which the sound power flow can flexibly propagate along arbitrary sound pathways defined by our acoustic devices with eccentrically emplaced regular-tetrahedral solids.

Sub-decadal turbidite frequency during the early Holocene: Eel Fan, offshore northern California

USGS Publications Warehouse

Paull, Charles K.; McGann, Mary L.; Sumner, Esther J; Barnes, Philip M; Lundsten, Eve M.; Anderson, Krystle; Gwiazda, Roberto; Edwards, Brian D.; Caress, David W

2014-01-01

Remotely operated and autonomous underwater vehicle technologies were used to image and sample exceptional deep sea outcrops where an ∼100-m-thick section of turbidite beds is exposed on the headwalls of two giant submarine scours on Eel submarine fan, offshore northern California (USA). These outcrops provide a rare opportunity to connect young deep-sea turbidites with their feeder system. 14C measurements reveal that from 12.8 ka to 7.9 ka, one turbidite was being emplaced on average every 7 yr. This emplacement rate is two to three orders of magnitude higher than observed for turbidites elsewhere along the Pacific margin of North America. The turbidites contain abundant wood and shallow-dwelling foraminifera, demonstrating an efficient connection between the Eel River source and the Eel Fan sink. Turbidite recurrence intervals diminish fivefold to ∼36 yr from 7.9 ka onward, reflecting sea-level rise and re-routing of Eel River sediments.

Possible emplacement of crustal rocks into the forearc mantle of the Cascadia Subduction Zone

USGS Publications Warehouse

Calvert, A.J.; Fisher, M.A.; Ramachandran, K.; Trehu, A.M.

2003-01-01

Seismic reflection profiles shot across the Cascadia forearc show that a 5-15 km thick band of reflections, previously interpreted as a lower crustal shear zone above the subducting Juan de Fuca plate, extends into the upper mantle of the North American plate, reaching depths of at least 50 km. In the extreme western corner of the mantle wedge, these reflectors occur in rocks with P wave velocities of 6750-7000 ms-1. Elsewhere, the forearc mantle, which is probably partially serpentinized, exhibits velocities of approximately 7500 ms-1. The rocks with velocities of 6750-7000 ms-1 are anomalous with respect to the surrounding mantle, and may represent either: (1) locally high mantle serpentinization, (2) oceanic crust trapped by backstepping of the subduction zone, or (3) rocks from the lower continental crust that have been transported into the uppermost mantle by subduction erosion. The association of subparallel seismic reflectors with these anomalously low velocities favours the tectonic emplacement of crustal rocks. Copyright 2003 by the American Geophysical Union.

Spectral reflectance studies of the Humorum Basin region

NASA Technical Reports Server (NTRS)

Peterson, C. A.; Hawke, B. R.; Lucey, P. G.; Taylor, G. J.; Blewett, D. T.; Spudis, P. D.

1993-01-01

A portion of the mare-bounding (MB) ring of Humorum Basin is composed of pure anorthosite while other parts of the ring are composed of noritic anorthosite. An episode of mare volcanism emplaced basaltic units in the region northwest of the MB ring after the Humorum impact event. Subsequently, large impacts emplaced a veneer of highlands material atop the basalt flows. Some mare material could have been mixed with this highlands debris either by local mixing by secondary craters or by vertical mixing. Spectra for most other highlands units in the region indicate a noritic anorthosite lithology. Spectra of mare basalts in Mare Humorum and nearby mare flooded craters show relatively deep absorption bands due to the presence of abundant high-Ca pyroxene. An analysis of spectra for a small number of craters in the highlands west of the outer ring of Humorum reveals the presence of high-Ca pyroxene. This suggests the possible presence of an extensive gabbroic province.

Additive Construction with Mobile Emplacement (ACME) / Automated Construction of Expeditionary Structures (ACES) Materials Delivery System (MDS)

NASA Technical Reports Server (NTRS)

Mueller, R. P.; Townsend, I. I.; Tamasy, G. J.; Evers, C. J.; Sibille, L. J.; Edmunson, J. E.; Fiske, M. R.; Fikes, J. C.; Case, M.

2018-01-01

The purpose of the Automated Construction of Expeditionary Structures, Phase 3 (ACES 3) project is to incorporate the Liquid Goods Delivery System (LGDS) into the Dry Goods Delivery System (DGDS) structure to create an integrated and automated Materials Delivery System (MDS) for 3D printing structures with ordinary Portland cement (OPC) concrete. ACES 3 is a prototype for 3-D printing barracks for soldiers in forward bases, here on Earth. The LGDS supports ACES 3 by storing liquid materials, mixing recipe batches of liquid materials, and working with the Dry Goods Feed System (DGFS) previously developed for ACES 2, combining the materials that are eventually extruded out of the print nozzle. Automated Construction of Expeditionary Structures, Phase 3 (ACES 3) is a project led by the US Army Corps of Engineers (USACE) and supported by NASA. The equivalent 3D printing system for construction in space is designated Additive Construction with Mobile Emplacement (ACME) by NASA.

Dike emplacement on Venus and on earth

NASA Technical Reports Server (NTRS)

Mckenzie, Dan; Mckenzie, James M.; Saunders, R. S.

1992-01-01

Attention is given to long linear features visible in SAR images of the surface of Venus. They are shallow graben a few kilometers across. Calculations show that dike emplacement can account for such features if the top of the dikes is a few kilometers below the surface of the planet. The dikes are often curved near their probable sources, and the magnitude of the regional stress field estimated from this curvature is about 3 MPa, or similar to that of earth. On both Venus and earth, dikes often form intersecting patterns. Two-dimensional calculations show that this behavior can occur only if the stress field changes with time. Transport of melt over distances as large as 2000 km in dikes whose width is 30 m or more occurs in some continental shields on earth and can also account for linear features on Venus that extend for comparable distances. Such transport is possible because the viscosity and thermal conductivity of both the melt and the wall rock are small.

Exceptional mobility of an advancing rhyolitic obsidian flow at Cordón Caulle volcano in Chile.

PubMed

Tuffen, Hugh; James, Mike R; Castro, Jonathan M; Schipper, C Ian

2013-01-01

The emplacement mechanisms of rhyolitic lava flows are enigmatic and, despite high lava viscosities and low inferred effusion rates, can result in remarkably, laterally extensive (>30 km) flow fields. Here we present the first observations of an active, extensive rhyolitic lava flow field from the 2011-2012 eruption at Cordón Caulle, Chile. We combine high-resolution four-dimensional flow front models, created using automated photo reconstruction techniques, with sequential satellite imagery. Late-stage evolution greatly extended the compound lava flow field, with localized extrusion from stalled, ~35 m-thick flow margins creating >80 breakout lobes. In January 2013, flow front advance continued ~3.6 km from the vent, despite detectable lava supply ceasing 6-8 months earlier. This illustrates how efficient thermal insulation by the lava carapace promotes prolonged within-flow horizontal lava transport, boosting the extent of the flow. The unexpected similarities with compound basaltic lava flow fields point towards a unifying model of lava emplacement.

Thermohydrological conditions and silica redistribution near high-level nuclear wastes emplaced in saturated geological formations

NASA Astrophysics Data System (ADS)

Verma, A.; Pruess, K.

1988-02-01

Evaluation of the thermohydrological conditions near high-level nuclear waste packages is needed for the design of the waste canister and for overall repository design and performance assessment. Most available studies in this area have assumed that the hydrologic properties of the host rock are not changed in response to the thermal, mechanical, or chemical effects caused by waste emplacement. However, the ramifications of this simplifying assumption have not been substantiated. We have studied dissolution and precipitation of silica in liquid-saturated hydrothermal flow systems, including changes in formation porosity and permeability. Using numerical simulation, we compare predictions of thermohydrological conditions with and without inclusion of silica redistribution effects. Two cases were studied, namely, a canister-scale problem, and a repository-wide thermal convection problem and different pore models were employed for the permeable medium (fractures with uniform or nonuniform cross sections). We find that silica redistribution in water-saturated conditions does not have a sizeable effect on host rock and canister temperatures, pore pressures, or flow velocities.

Observational Constraints on the Identification of Shallow Lunar Magmatism: Insights from Floor-Fractured Craters

NASA Technical Reports Server (NTRS)

Jozwiak, L. M.; Head, J. W., III; Neumann, G. A.; Wilson, L.

2016-01-01

Floor-fractured craters are a class of lunar crater hypothesized to form in response to the emplacement of a shallow magmatic intrusion beneath the crater floor. The emplacement of a shallow magmatic body should result in a positive Bouguer anomaly relative to unaltered complex craters, a signal which is observed for the average Bouguer anomaly interior to the crater walls. We observe the Bouguer anomaly of floor-fractured craters on an individual basis using the unfiltered Bouguer gravity solution from GRAIL and also a degree 100-600 band-filtered Bouguer gravity solution. The low-magnitude of anomalies arising from shallow magmatic intrusions makes identification using unfiltered Bouguer gravity solutions inconclusive. The observed anomalies in the degree 100-600 Bouguer gravity solution are spatially heterogeneous, although there is spatial correlation between volcanic surface morphologies and positive Bouguer anomalies. We interpret these observations to mean that the spatial heterogeneity observed in the Bouguer signal is the result of variable degrees of magmatic degassing within the intrusions.

Bunte Breccia of the Ries - Continuous deposits of large impact craters

NASA Technical Reports Server (NTRS)

Horz, F.; Ostertag, R.; Rainey, D. A.

1983-01-01

The 26-km-diameter Ries impact crater in south Germany and the mechanism of ejection and emplacement associated with its formation about 15 Myr ago are discussed in detail, and the implications of the findings for models of crater formation on earth, moon, and planets are considered. Field observations and laboratory tests on 560-m core materials from nine locations are reported. The continuous deposits (Bunte Breccia) are found to be a chaotic mixture resulting from deposition at ambient temperatures in a highly turbulent environment, probably in the ballistic scenario proposed by Oberbeck et al. (1975), with an emplacement time of only about 5 min. Further impact parameters are estimated using the 'Z model' of Maxwell (1977): initial radius = 6.5 km, excavation depth = 1650 m, excavation volume = 136 cu km, and transient cavity volume = 230 cu km. The interpretation of lunar and planetary remote-sensing and in situ evidence from impact craters is reviewed in the light of the Ries findings. Numerous photographs, maps, diagrams, and tables illustrate the investigation.

Newly Discovered Ring-Moat Dome Structures in the Lunar Maria: Possible Origins and Implications

NASA Astrophysics Data System (ADS)

Zhang, Feng; Head, James W.; Basilevsky, Alexander T.; Bugiolacchi, Roberto; Komatsu, Goro; Wilson, Lionel; Fa, Wenzhe; Zhu, Meng-Hua

2017-09-01

We report on a newly discovered morphological feature on the lunar surface, here named Ring-Moat Dome Structure (RMDS). These low domes (a few meters to 20 m height with slopes <5°) are typically surrounded by narrow annular depressions or moats. We mapped about 2,600 RMDSs in the lunar maria with diameters ranging from tens to hundreds of meters. Four candidate hypotheses for their origin involving volcanism are considered. We currently favor a mechanism for the formation of the RMDS related to modification of the initial lava flows through inflated flow squeeze-ups and/or extrusion of magmatic foams below a cooling lava flow surface. These newly discovered features provide new insights into the nature of emplacement of lunar lava flows, suggesting that in the waning stages of a dike emplacement event, magmatic foams can be produced, extrude to the surface as the dike closes, and break through the upper lava flow thermal boundary layer (crust) to form foam mounds and surrounding moats.

Geologic Mapping in the Hesperia Planum Region of Mars

NASA Technical Reports Server (NTRS)

Gregg, Tracy K. P.; Crown, David A.

2010-01-01

Hesperia Planum, characterized by a high concentration of mare-type wrinkle ridges and ridge rings, encompasses > 2 million square km in the southern highlands of Mars. The most common interpretation is that the plains were emplaced as "flood" lavas with total thicknesses of <3 km [4-10]. The wrinkle ridges on its surface make Hesperia Planum the type locale for "Hesperian-aged ridged plains" on Mars, and wrinkle-ridge formation occurred in more than one episode. Hesperia Planum s stratigraphic position and crater-retention age define the base of the Hesperian System. However, preliminary results of geologic mapping reveal that the whole of Hesperia Planum is unlikely to be composed of the same materials, emplaced at the same geologic time. To unravel these complexities, we are generating a 1:1.5M-scale geologic map of Hesperia Planum and its surroundings. To date, we have identified 4 distinct plains units within Hesperia Planum and are attempting to determine the nature and relative ages of these materials.

Excess plutonium disposition: The deep borehole option

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ferguson, K.L.

1994-08-09

This report reviews the current status of technologies required for the disposition of plutonium in Very Deep Holes (VDH). It is in response to a recent National Academy of Sciences (NAS) report which addressed the management of excess weapons plutonium and recommended three approaches to the ultimate disposition of excess plutonium: (1) fabrication and use as a fuel in existing or modified reactors in a once-through cycle, (2) vitrification with high-level radioactive waste for repository disposition, (3) burial in deep boreholes. As indicated in the NAS report, substantial effort would be required to address the broad range of issues relatedmore » to deep bore-hole emplacement. Subjects reviewed in this report include geology and hydrology, design and engineering, safety and licensing, policy decisions that can impact the viability of the concept, and applicable international programs. Key technical areas that would require attention should decisions be made to further develop the borehole emplacement option are identified.« less

Geochronology, geochemistry, and tectonic environment of porphyry mineralization in the central Alaska Peninsula

USGS Publications Warehouse

Wilson, Frederic H.; Cox, Dennis P.

1983-01-01

Porphyry type sulfide systems on the central Alaska Peninsula occupy a transition zone between the Aleutian island magmatic arc and the continental magmatic arc of southern Alaska. Mineralization occurs associated with early and late Tertiary magmatic centers emplaced through a thick section of Mesozoic continental margin clastic sedimentary rocks. The systems are of the molybdenum-rich as opposed to gold-rich type and have anomalous tungsten, bismuth, and tin, attributes of continental-margin deposits, yet gravity data suggest that at least part of the study area is underlain by oceanic or transitional crust. Potassium-argon age determinations indicate a variable time span of up to 2 million years between emplacement and mineralization in a sulfide system with mineralization usually followed by postmineral intrusive events. Finally, mineralization in the study area occurred at many times during the time span of igneous activity and should be an expected stage in the history of a subduction related magmatic center.

Emplacement of a silicic lava dome through a crater glacier: Mount St Helens, 2004-06

USGS Publications Warehouse

Walder, J.S.; LaHusen, R.G.; Vallance, J.W.; Schilling, S.P.

2007-01-01

The process of lava-dome emplacement through a glacier was observed for the first time after Mount St Helens reawakened in September 2004. The glacier that had grown in the crater since the cataclysmic 1980 eruption was split in two by the new lava dome. The two parts of the glacier were successively squeezed against the crater wall. Photography, photogrammetry and geodetic measurements document glacier deformation of an extreme variety, with strain rates of extraordinary magnitude as compared to normal alpine glaciers. Unlike normal temperate glaciers, the crater glacier shows no evidence of either speed-up at the beginning of the ablation season or diurnal speed fluctuations during the ablation season. Thus there is evidently no slip of the glacier over its bed. The most reasonable explanation for this anomaly is that meltwater penetrating the glacier is captured by a thick layer of coarse rubble at the bed and then enters the volcano's groundwater system rather than flowing through a drainage network along the bed.

Ancient Continental Lithosphere Dislocated Beneath Ocean Basins Along the Mid-Lithosphere Discontinuity: A Hypothesis

NASA Astrophysics Data System (ADS)

Wang, Zhensheng; Kusky, Timothy M.; Capitanio, Fabio A.

2017-09-01

The documented occurrence of ancient continental cratonic roots beneath several oceanic basins remains poorly explained by the plate tectonic paradigm. These roots are found beneath some ocean-continent boundaries, on the trailing sides of some continents, extending for hundreds of kilometers or farther into oceanic basins. We postulate that these cratonic roots were left behind during plate motion, by differential shearing along the seismically imaged mid-lithosphere discontinuity (MLD), and then emplaced beneath the ocean-continent boundary. Here we use numerical models of cratons with realistic crustal rheologies drifting at observed plate velocities to support the idea that the mid-lithosphere weak layer fostered the decoupling and offset of the African continent's buoyant cratonic root, which was left behind during Meso-Cenozoic continental drift and emplaced beneath the Atlantic Ocean. We show that in some cratonic areas, the MLD plays a similar role as the lithosphere-asthenosphere boundary for accommodating lateral plate tectonic displacements.

Coupled THM processes in EDZ of crystalline rocks using an elasto-plastic cellular automaton

NASA Astrophysics Data System (ADS)

Pan, Peng-Zhi; Feng, Xia-Ting; Huang, Xiao-Hua; Cui, Qiang; Zhou, Hui

2009-05-01

This paper aims at a numerical study of coupled thermal, hydrological and mechanical processes in the excavation disturbed zones (EDZ) around nuclear waste emplacement drifts in fractured crystalline rocks. The study was conducted for two model domains close to an emplacement tunnel; (1) a near-field domain and (2) a smaller wall-block domain. Goodman element and weak element were used to represent the fractures in the rock mass and the rock matrix was represented as elasto-visco-plastic material. Mohr-Coulomb criterion and a non-associated plastic flow rule were adopted to consider the viscoplastic deformation in the EDZ. A relation between volumetric strain and permeability was established. Using a self-developed EPCA2D code, the elastic, elasto-plastic and creep analyses to study the evolution of stress and deformations, as well as failure and permeability evolution in the EDZ were conducted. Results indicate a strong impact of fractures, plastic deformation and time effects on the behavior of EDZ especially the evolution of permeability around the drift.

The intercrater plains of Mercury and the Moon: Their nature, origin and role in terrestrial planet evolution. Chronology of surface history of Mercury. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Leake, M. A.

1982-01-01

Phases in the history of the planet Mercury include: (1) condensation and accretion; (2) heating; (3) planetary expansion during heavy bombardment; (4) tidal spin-down and lineament formation; (5) P5 plains emplacement; (6) P4 plains emplacement; (7) peak planetary volume in P3 period; (8) scarp formation; (9) Caloris Basin formation, late class 3; (10) scarp formation and P2 plains formation; (11) smooth plains formation in and around large basins; (12) late or local tectonic stress; and (13) quiescent class 1 period. Although the cooling and contraction of the lithosphere are complete, the core remains molten as an active dynamo, producing the magnetic fields detected by Mariner 10. Plains produced since core formation (P3 to P-1) should record its magnetic activity. Cratering during the Class 2 and Class 1 periods is probably not enough to distribute ballistic materials and homogenize any color differences.

Correlation of ash-flow tuffs.

USGS Publications Warehouse

Hildreth, W.; Mahood, G.

1985-01-01

Discrimination and correlation of ash-flow sheets is important in structurally complex, long-lived volcanic fields where such sheets provide the best keys to the regional stratigraphic framework. Three-dimensional complexities resulting from pulsatory eruptions, sectorial emplacement, mechanical sorting during outflow, thermal and compositional zoning of magmas, the physical zoning of cooling units, and structural and erosional disruption can make such correlation and discrimination difficult. When lithologic, magnetic, petrographic, chemical, and isotopic criteria for correlating ash-flow sheets are critically evaluated, many problems and pitfalls can be identified. Distinctive phenocrysts, pumice clasts, and lithic fragments are among the more reliable criteria, as are high-precision K-Ar ages and thermal remanent magnetization (TRM) directions in unaltered welded tuff. Chemical correlation methods should rely principally upon welded or nonwelded pumice blocks, not upon the ash-flow matrix, which is subject to fractionation, mixing, and contamination during emplacement. Compositional zoning of most large sheets requires that many samples be analyzed before phenocryst, glass or whole-rock chemical trends can be used confidently as correlation criteria.-Authors

U-Pb geochronology documents out-of-sequence emplacement of ultramafic layers in the Bushveld Igneous Complex of South Africa.

PubMed

Mungall, James E; Kamo, Sandra L; McQuade, Stewart

2016-11-14

Layered intrusions represent part of the plumbing systems that deliver vast quantities of magma through the Earth's crust during the formation of large igneous provinces, which disrupt global ecosystems and host most of the Earth's endowment of Pt, Ni and Cr deposits. The Rustenburg Layered Suite of the enormous Bushveld Igneous Complex of South Africa has been presumed to have formed by deposition of crystals at the floor of a subterranean sea of magma several km deep and hundreds of km wide called a magma chamber. Here we show, using U-Pb isotopic dating of zircon and baddeleyite, that individual chromitite layers of the Rustenburg Layered Suite formed within a stack of discrete sheet-like intrusions emplaced and solidified as separate bodies beneath older layers. Our U-Pb ages and modelling necessitate reassessment of the genesis of layered intrusions and their ore deposits, and challenge even the venerable concept of the magma chamber itself.

Emplacement of Xenolith Nodules in the Kaupulehu Lava Flow, Hualalai Volcano, Hawaii

NASA Technical Reports Server (NTRS)

Guest, J. E.; Spudis, P. D.; Greeley, R.; Taylor, G. J.; Baloga, S. M.

1995-01-01

The basaltic Kaupulehu 1800-1801 lava flow of Hualalai Volcano, Hawaii contains abundant ultramafic xenoliths. Many of these xenoliths occur as bedded layers of semi-rounded nodules, each thinly coated with a veneer (typically 1 mm thick) of lava. The nodule beds are analogous to cobble deposits of fluvial sedimentary systems. Although several mechanisms have been proposed for the formation of the nodule beds, it was found that, at more than one locality, the nodule beds are overbank levee deposits. The geological occurrence of the nodules, certain diagnostic aspects of the flow morphology and consideration of the inferred emplacement process indicate that the Kaupulehu flow had an exceptionally low viscosity on eruption and that the flow of the lava stream was extremely rapid, with flow velocities of at least 10 m/s (more than 40 km/h. This flow is the youngest on Hualalai Volcano and future eruptions of a similar type would pose considerable hazard to life as well as property.

Biographical Narratives of Encounter: The Significance of Mobility and Emplacement in Shaping Attitudes towards Difference

PubMed Central

Sadgrove, Joanna

2014-01-01

This paper is located within work in urban studies about the significance of contact with difference as a means for reducing prejudice and achieving social change. Recent approaches, influenced by theories of affect, have emphasised non-conscious everyday negotiations of difference in the city. In this paper it is argued that such approaches lose sight of the significance of the subject: of the reflective judgements of ‘others’ made by individuals; of our ability to make decisions around the control of our feelings and identifications; and of the significance of personal pasts and collective histories in shaping the ways we perceive and react to encounters. Rather, this paper uses a biographical approach focusing on interviewees’ narratives of encounter. Through its attention to processes of mobility and emplacement, it contributes to debates about when contact with difference matters by highlighting the importance of everyday social normativities in the production of moral dispositions. PMID:26300566

Origin, mode of emplacement, and trace element geochemistry of albertite at the type locality, Albert Mines, southeastern New Brunswick, Canada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farrell, K.P.J.; Mossman, D.J.

1995-07-01

Fracturing of oil shale was coeval with albertite vein formation at Albert Mines early in the diagenetic history of the Lower Carboniferous (Tourmasian) Albert Formation. Albertite of this type locality is a pre-oil bitumen produced as a result of overpressuring due to a high rate of hydrocarbon generation and, as such, is largely preserved in an immature source rock. Dolomite precipitated in albertite during emplacement of the latter, and was sourced from an accompanying CO{sub 2}-rich fluid phase. Trace element contents of albertite are within the range of selected other major bitumen occurrences and, except for nickel, are lower thanmore » those of the host rock. Ratios of Ni/V are elevated in comparison with the host oil shale and with other bitumen occurrences. Carbon isotope values for albertite range from 27.92 to 30.80 {per_thousand}, {delta} {sup 13}C, within the range of most conventional crudes.« less

A Comprehensive Expedient Methods Field Manual.

DTIC Science & Technology

1984-09-01

structures. " Revetments may be constructed of sandbags, sod blocks , and other expedients [17:933." Bunkers are emplacements with overhead protective...Lapland Fence............................. 75 19. Hardening: Dimensional Timber (Soil Bin) Revetment ............................................. 76...20. Hardening: Log Bulkhead (Soil Bin) Revetment ... 77 21. Hardening: Landing Mat Bulkhead (Soil Bin) Revetment

A NEW TWO-PHASE FLOW AND TRANSPORT MODEL WITH INTERPHASE MASS EXCHANGE

EPA Science Inventory

The focus of this numerical investigation is on modelling the emplacement and subsequent removal, through dissolution, of a Denser-than-water Non-Aqueous Phase Liquid (DNAPL) in a saturated groundwater system. pecifically the model must address two flow and transport regimes. irs...

In situ biofilm coupon device

DOEpatents

Peyton, Brent M.; Truex, Michael J.

1997-01-01

An apparatus for characterization of in-situ microbial biofilm populations in subsurface groundwater. The device permits biofilm-forming microorganisms to adhere to packing material while emplaced in a groundwater strata, so that the packing material can be later analyzed for quantity and type of microorganisms, growth rate, and nutrient requirements.

10 CFR 61.28 - Contents of application for closure.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Licenses § 61.28 Contents of application for closure. (a) Prior to final closure of the disposal... site data pertinent to the long-term containment of emplaced radioactive wastes obtained during the...

10 CFR 61.28 - Contents of application for closure.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Licenses § 61.28 Contents of application for closure. (a) Prior to final closure of the disposal... site data pertinent to the long-term containment of emplaced radioactive wastes obtained during the...

10 CFR 61.28 - Contents of application for closure.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Licenses § 61.28 Contents of application for closure. (a) Prior to final closure of the disposal... site data pertinent to the long-term containment of emplaced radioactive wastes obtained during the...

10 CFR 61.28 - Contents of application for closure.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Licenses § 61.28 Contents of application for closure. (a) Prior to final closure of the disposal... site data pertinent to the long-term containment of emplaced radioactive wastes obtained during the...

10 CFR 61.28 - Contents of application for closure.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Licenses § 61.28 Contents of application for closure. (a) Prior to final closure of the disposal... site data pertinent to the long-term containment of emplaced radioactive wastes obtained during the...

Aerogeophysical evidence for strike-slip faulting at the boundary between East and West Antarctica: implications for Jurassic magma emplacement and Gondwana breakup models

NASA Astrophysics Data System (ADS)

Jordan, Tom; Ferraccioli, Fausto

2014-05-01

Fragmentation of the Gondwana supercontinent began in the Jurassic and was the most significant reconfiguration of the continents of the southern hemisphere in the last 500 Ma. Jurassic continental rifting began adjacent to South Africa in the Weddell Sea region of Antarctica. This region is therefore critical for understanding the process that initiated supercontinent breakup, including the role of mantle plumes, magmatism, and major plate and microplate re-configurations. However, due to the remote location and blanketing ice sheets, the magmatic and tectonic evolution of the Weddell Sea sector of Antarctica has remained poorly understood and controversial. Our recent aeromagnetic and airborne gravity investigations reveal the inland extent of the Weddell Sea Rift system beneath the West Antarctic Ice Sheet, and indicate the presence of a major left-lateral strike slip fault system, separating the Ellsworth Whitmore block from East Antarctica (Jordan et al., 2013 Tectonophysics). In this study we use 3D inversion of magnetic data to investigate the geometry and emplacement mechanism of Jurassic granites both along the boundary and within the Ellsworth-Whitmore block. Our models demonstrate a high degree of structural control on Jurassic granite emplacement along the newly identified left-lateral Pagano Shear Zone that flanks the Ellsworth-Whitmore block. Other granitoids emplaced further west within the Ellsworth-Whtimore block itself do not appear to have the same structural control, suggesting that this possible microplate or block was relatively more rigid. Extensive and likely more rigid Precambrian basement of Grenvillian-age is clearly delineated from aeromagnetic signatures at the northern edge of the Ellsworth-Whitmore block, lending support to this interpretation. Most intriguing, it that the high amplitude anomalies over the northern margin of the Ellsworth-Whitmore block are remarkably similar to those previously mapped over the Shackleton Range in East Antarctica. In the Shackleton Range, the association between Grenvillian-age basement and aeromagnetic anomalies is less well-constrained but nevertheless possible. Here we test in Gplates our new geodynamic model that involves the Ellsworth Whitmore block being originally closer to the Shackleton Range region in East Antarctica and then translated to West Antarctica in Jurassic times via ca 300 km of crustal extension in the Weddell Sea rift. We compare and contrast our new model with the currently more widely accepted geodynamic model that predicts significantly more complex movements of the Ellsworth-Whitmore microplate, including 180 degree rotation, and ~1500 km of strike-slip displacement from the Natal Embayment adjacent to South Africa to its current position in West Antarctica.

Chronology of Late Cretaceous igneous and hydrothermal events at the Golden Sunlight gold-silver breccia pipe, southwestern Montana

USGS Publications Warehouse

DeWitt, Ed; Foord, Eugene E.; Zartman, Robert E.; Pearson, Robert C.; Foster, Fess

1996-01-01

Gold mineralization at the Golden Sunlight breccia pipe, southwestern Montana, is related to emplacement of Late Cretaceous alkali-calcic rhyolite and subsequent collapse of the Belt Supergroup wallrock and rhyolite in the pipe. The pipe is inferred to grade downward into an alkalic porphyry molybdenum system. The pipe is cut by alkalic to sub-alkalic lamprophyre dikes and sills, which locally contain high-grade gold where emplaced along late shear zones and vein systems. Determination of the emplacement age of the rhyolite is hampered by inherited lead or inherited Late Archean zircon from the source region of the rhyolite. An emplacement age of about 80 Ma for the rhyolite can be inferred if a basement age of 2,600 Ma is assumed. This Late Archean age is in agreement with basement ages determined in many parts of southwestern Montana. A 206 Pb- 238 U whole-rock date of 84 ? 18 Ma from altered and mineralized Belt Supergroup strata and rhyolite in the breccia pipe indicates hydrothermal alteration related to gold mineralization in Late Cretaceous time. Although sericite is a relatively widespread hydrothermal mineral, attempts to date the very fine grained material by the 40 Ar- 39 Ar method did not provide a spectra that could be interpreted unambiguously. A 40 Ar- 39 Ar plateau date of 76.9 ? 0.5 Ma from biotite phenocrysts in the lamprophyre indciates intrusion of mafic magma and attendant CO 2 metasomatism in the Late Cretaceous. Fission-track data from zircon in the rhyolite are permissive of slow uplift of the Belt Supergroup strata, 1U.S. Geological Survey, Box 25046, Denver Federal Center, Denver, CO 80225. 2Golden Sunlight Mines, Inc., 453 MT Highway 2 East, Whitehall, MT 59759. rhyolite, and lamprophyre between 55 and 50 Ma, but the data are not definitive. Rhyolitic welded tuff in the informally named units 7, 9, and 11 of the Elkhorn Mountains Volcanics is most similar in chemistry and age to the rhyolite at the Golden Sunlight mine. Trachybasalt in the Adel Mountains Volcanics and andesitic basalt in the informally named unit 8 of the Elkhorn Mountains Volcanics are the most analogous in chemistry and age to lamprophyres at the mine. The rhyolitic rocks appear to be derived from deep crustal sources, but data for the lamprophyres and mafic rocks in the Elkhorn Mountains Volcanics indicate that they were derived from the mantle.

Influence of low-angle normal faulting on radial fracture pattern associated to pluton emplacement in Tuscany, Italy

NASA Astrophysics Data System (ADS)

Balsamo, F.; Rossetti, F.; Salvini, F.

2003-04-01

Fault-related fracture distribution significantly influences fluid flow in the sub-surface. Fault zone can act either as barriers or conduits to fluid migration, or as mixed conduit/barrier systems, depending on several factors that include the enviromental condition of deformation (pore fluid pressure, regional stress fields, overburden etc.), the kinematics of the fault and its geometry, and the rock type. The aim of this study is to estimate the boundary conditions of deformation along the Boccheggiano Fault, in the central Appennines. Seismic and deep well data are avaible for the Boccheggiano area, where a fossil geothermal system is exposed. The dominant structural feature of the studied area is a NW-SE trending low-angle detachment fault (Boccheggiano fault, active since the upper Miocene times), separating non-metamorphic sedimentary sequences of the Tuscan meso-cenozoic pelagiac succession and oceanic-derived Ligurids in the hangingwall, from green-schists facies metamorphic rocks of Paleozoic age in the footwall. Gouge-bearing mineralized damage zone (about 100 m thick) is present along the fault. The deep geometry of the Boccheggiano Fault is well imaged in the seismic profiles. The fault is shallow-dipping toward NE and flattens at the top of a magmatic intrusion, which lies at about 1000 m below the ground-level. Geometrical relationships indicate syn-tectonic pluton emplacement at the footwall of the Boccheggiano fault. Statistical analysis of fracture distribution pointed out a strong control of both azimuth and frequency by their position with respect to the Boccheggiano Fault: (i) a NW-SE trending fracture set within the fault zone, (ii) a radial pattern associated away from fault zone. Interpretation of structural and seismic data suggest an interplay between the near-field deformation associated with the rising intrusion during its emplacement (radial fracturing) and the NE-SW far-field extensional tectonic regime (NW-SE fractures) recognized in the area, responsible for the fault development. The 3-D geometry of the Boccheggiano Fault was simulated in a numerical tool specifically designed to model the 3-D distribution of fractures (joints and solution surfaces) along fault. Comparison between the actual fracture distribution and the predicted ones at different boundary conditions allowed to estimate the resulting stress field (both far field and near field) and the pore fluid pressure acting during fault motion and co-eval pluton emplacement. Numerical modelling predictions indicate transfer segments along the main fault as more permeable sectors. This justify the location intense mineralisation zones and abandoned mines.

Emplacement, petrological and magnetic susceptibility characteristics of diverse magmatic epidote-bearing granitoid rocks in Brazil, Argentina and Chile

NASA Astrophysics Data System (ADS)

Sial, A. N.; Toselli, A. J.; Saavedra, J.; Parada, M. A.; Ferreira, V. P.

1999-03-01

Magmatic epidote (mEp)-bearing granitoids from five Neoproterozoic tectonostratigraphic terranes in Northeastern (NE) Brazil, Early Palaeozoic calc-alkalic granitoids in Northwestern (NW) Argentina and from three batholiths in Chile have been studied. The elongated shape of some of these plutons suggests that magmas filled fractures and that dyking was probably the major mechanism of emplacement. Textures reveal that, in many cases, epidote underwent partial dissolution by host magma and, in these cases, may have survived dissolution by relatively rapid upward transport by the host magma. In plutons where such a mechanism is not evident, unevenly distributed epidote at outcrop scale is armoured by biotite or near-solidus K-feldspar aggregates, which probably grew much faster than epidote dissolution, preventing complete resorption of epidote by the melt. Al-in-hornblende barometry indicates that, in most cases, amphibole crystallized at P≥5 kbar. Kyanite-bearing thermal aureoles surrounding plutons that intruded low-grade metamorphic rocks in NE Brazil support pluton emplacement at intermediate to high pressure. mEp show overall chemical variation from 20 to 30 mol% (mole percent) pistacite (Ps) and can be grouped into two compositional ranges: Ps 20-24 and Ps 27-30. The highest Ps contents are in epidotes of plutons in which hornblende solidified under P<5 kbar. The percentage of corrosion of individual epidote crystals included in plagioclase in high-K calc-alkalic granitoids in NE Brazil, emplaced at 5-7 kbar pressure, yielded estimates of magma transport rate from 70 to 350 m year -1. Most of these plutons lack Fe-Ti oxide minerals and Fe +3 is mostly associated with the epidote structure. Consequently, magnetic susceptibility (MS) in the Neoproterozoic granitoids in NE Brazil, as well as Early Palaeozoic plutons in Argentina and Late Palaeozoic plutons in Chile, is usually low (<0.50×10 -3 SI), which is typical behavior of plutons which crystallized under low fO 2 (ilmenite-series granitoids), although Fe/(Fe+Mg) ratios in hornblende (0.40-0.65) indicate crystallization under high fO 2. Mesozoic to Tertiary calc-alkalic plutons in Chile, however, exhibit iron oxide minerals and MS values >3.0×10 -3 SI, typical of magnetite-series granitoids crystallized under higher oxygen fugacity. In NE Brazil, Argentina and Chile, it seems that mEp is more common in Precambrian to Palaeozoic ilmenite-series granitoids, while its occurrence in magnetite-series granitoids is more restricted to Mesozoic to Tertiary granitoids.

Field-trip guide to Mount St. Helens, Washington - An overview of the eruptive history and petrology, tephra deposits, 1980 pyroclastic density current deposits, and the crater

USGS Publications Warehouse

Pallister, John S.; Clynne, Michael A.; Wright, Heather M.; Van Eaton, Alexa R.; Vallance, James W.; Sherrod, David R.; Kokelaar, B. Peter

2017-08-02

This field trip will provide an introduction to several fascinating features of Mount St. Helens. The trip begins with a rigorous hike of about 15 km from the Johnston Ridge Observatory (9 km north-northeast of the crater vent), across the 1980 Pumice Plain, to Windy Ridge (3.6 km northeast of the crater vent) to examine features that document the dynamics and progressive emplacement of pyroclastic flows. The next day, we examine classic tephra outcrops of the past 3,900 years and observe changes in thickness and character of these deposits as we traverse their respective lobes. We examine clasts in the deposits and discuss how the petrology and geochemistry of Mount St. Helens deposits reveal the evolution of the magmatic system through time. We also investigate the stratigraphy of the 1980 blast deposit and review the chronology of this iconic eruption as we travel through the remains of the blown-down forest. The third day is another rigorous hike, about 13 km round trip, climbing from the base of Windy Ridge (elevation 1,240 m) to the front of the Crater Glacier (elevation 1,700 m). En route we examine basaltic andesite and basalt lava flows emplaced between 1,800 and 1,700 years before present, a heterolithologic flow deposit produced as the 1980 blast and debris avalanche interacted, debris-avalanche hummocks that are stranded on the north flank and in the crater mouth, and shattered dacite lava domes that were emplaced between 3,900 and 2,600 years before present. These domes underlie the northern part of the volcano. In addition, within the crater we traverse well-preserved pyroclastic-flow deposits that were emplaced on the crater floor during the summer of 1980, and a beautiful natural section through the 1980 deposits in the upper canyon of the Loowit River.Before plunging into the field-trip log, we provide an overview of Mount St. Helens geology, geochemistry, petrology, and volcanology as background. The volcano has been referred to as a “master teacher.” The 1980 eruption and studies both before and after 1980 played a major role in the establishment of the modern U.S. Geological Survey Volcano Hazards Program and our understanding of flank collapses, debris avalanches, cryptodomes, blasts, pyroclastic density currents, and lahars, as well as the dynamics of magma ascent and eruption.

The mode of emplacement of Neogene flood basalts in Eastern Iceland: The plagioclase ultraphyric basalts in the Grænavatn group

NASA Astrophysics Data System (ADS)

Óskarsson, Birgir V.; Andersen, Christina B.; Riishuus, Morten S.; Sørensen, Erik Vest; Tegner, Christian

2017-02-01

Plagioclase ultraphyric basalt lava with high fraction of solids have a mode of emplacement that is poorly understood. In this study we conduct detailed mapping of a PUB group in eastern Iceland, namely the Grænavatn group, and assess the group architecture, flow morphology and internal structure with additional constraints from petrography, petrology and crystal size distribution, to derive information on emplacement dynamics of plagioclase ultraphyric basalts. We also derive information on the plumbing system of the group with reference to the source of the macrocysts. The group is exposed in steep glacially carved fjords and can be traced for more than 70 km along strike. The flows have mixed architecture of simple and compound flows. Individual flow lobes have thicknesses in the range of 1-24 m and many reach widths and lengths exceeding 1000 m. The flows vary from rubbly to slabby pahoehoe, but are predominantly of pahoehoe type. The aspect ratio of the group and the nature of the flows indicate fissure-fed eruptions. The plagioclase macrocrysts (5-30 mm) are An-rich, exhibit bimodal size distribution and the modal proportions within the group varies from 15-40%. Clinopyroxene macrocrysts are also present ranging from 1-6%. The lowermost flow is thickest and carries the greatest crystal cargo load. The morphology of the lava flows suggests low viscous behavior, at odds with the high crystal content. The very calcic plagioclase macrocrysts (An80-85) are in disequilibrium with the groundmass and plagioclase microlaths therein (An50-70), meaning that the crystal-laden magmas quickly ascended from deeper crustal levels to the surface. The flows with highest crystal content may have maintained high temperatures by heat exchange with the primitive macrocrysts in the flows and developed non-Newtonian behavior such as shear thinning. Such conditions would have enabled the flows to advance rapidly during episodes with high effusion rates forming the simple flows, and subsequently maintained by insulated lobe-by-lobe emplacement. Occasionally surges disrupted the crust to form rubbly and slabby pahoehoe. A Herschel-Bulkley model is applied to the flows yielding effusion rates in the order of 103-104 m 3/s for the largest eruptions. Variation in crystal proportions within the group and individual flows is considered to be the result of magmas penetrating a crystal mush, followed by disaggregation and mobilization, sorting by flotation, mixing of magma batches and transportation of heterogeneous crystal-laden magmas to the surface with opportunities for staging en route.

Permian charnockites in the Pobeda area: Implications for Tarim mantle plume activity and HT metamorphism in the South Tien Shan range

NASA Astrophysics Data System (ADS)

Loury, Chloé; Rolland, Yann; Lanari, Pierre; Guillot, Stéphane; Bosch, Delphine; Ganino, Clément; Jourdon, Anthony; Petit, Carole; Gallet, Sylvain; Monié, Patrick; Riel, Nicolas

2018-04-01

The Permian history of the Central Asian Orogenic belt is marked by large-scale strike-slip faults that reactivate former Paleozoic structures, delineated by widespread alkaline magmatism. The genetic link between the syn-kinematic granitoids emplaced in the Tien Shan range and magmas emplaced within the Tarim Large Igneous Province, and the interaction between this plume and transcurrent tectonics, are still unsolved issues. We investigated the Pobeda massif, in the eastern Kyrgyz Tien Shan, located at the boundary between the Tien Shan range and the Tarim Craton, which exhibits a high-temperature unit. In this unit, Permian magmatism resulted in the emplacement of alkaline charnockites at mid-crustal levels. The primary mineralogical assemblage is nominally anhydrous and made of ortho- and clino-pyroxenes, fayalite, K-feldspar, plagioclase and quartz. These charnockites are associated with partially-molten paragneisses and marbles. Thermobarometry on these rocks indicates that the charnockites emplaced following the intrusion of a melt at a temperature > 1000 °C and pressure of around 6 kbar, corresponding to depth of 20 km. The resulting thermal anomaly triggered the partial melting of paragneisses. Bulk geochemistry including Sr, Nd, Pb and Hf isotopes suggests that charnockites fit into the Tarim Large Igneous Province magmatic series, with minor crustal assimilation. U-Pb ages on zircons of charnockites and surrounding paragneisses indicate that charnockites intruded and triggered partial melting of the gneisses at c. 287, 275 and 265 Ma. 40Ar/39Ar dating on amphibole gives a similar age as the U-Pb age at 276.2 ± 2.0 Ma. 40Ar/39Ar dating on biotite from the Charnockite unit marbles gives ages at ca. 256-265 Ma, which shows that exhumation onset directly follows the HT history, and is tentatively correlated to top-to-the-North thrusting of the Charnockite unit in a transpressive context. Additional 40Ar/39Ar dating on syn-kinematic white micas from an adjacent transpressive shear-zone indicates continuation of the strike-slip tectonics at shallow crustal levels, after the exhumation of the Charnockite unit, at 248-257 Ma. These results demonstrate that Tien Shan Permian magmatism is linked to the Tarim mantle plume activity. Lithosphere-scale shear zones in the Tien Shan range, could have been responsible for lateral flow focusing of the Tarim mantle plume up to the boundary with the Tien Shan range and subsequent decompression melting resulting in the Permian magmatism observed in the Pobeda area.

Development of Mine Explosion Ground Truth Smart Sensors

DTIC Science & Technology

2011-09-01

interest. The two candidates are the GS11-D by Oyo Geospace that is used extensively in seismic monitoring of geothermal fields and the Sensor Nederland SM...Technologies 853 Figure 4. Our preferred sensors and processor for the GTMS. (a) Sensor Nederland SM-6 geophone with emplacement spike. (b

40 CFR 194.43 - Passive institutional controls.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., design, and contents of the disposal system. Such measures shall include: (1) Identification of the controlled area by markers that have been designed and will be fabricated and emplaced to be as permanent as... system; (ii) The design of the disposal system; (iii) The nature and hazard of the waste; (iv) Geologic...

40 CFR 194.43 - Passive institutional controls.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., design, and contents of the disposal system. Such measures shall include: (1) Identification of the controlled area by markers that have been designed and will be fabricated and emplaced to be as permanent as... system; (ii) The design of the disposal system; (iii) The nature and hazard of the waste; (iv) Geologic...

10 CFR 63.51 - License amendment for permanent closure.

Code of Federal Regulations, 2011 CFR

2011-01-01

... to compliance with § 63.113. (2) A description of the program for post-permanent closure monitoring... that have been designed, fabricated, and emplaced to be as permanent as is practicable; (ii) Placement..., pertinent to compliance with § 63.113. (5) The results of tests, experiments, and any other analyses...

10 CFR 63.51 - License amendment for permanent closure.

Code of Federal Regulations, 2012 CFR

2012-01-01

... to compliance with § 63.113. (2) A description of the program for post-permanent closure monitoring... that have been designed, fabricated, and emplaced to be as permanent as is practicable; (ii) Placement..., pertinent to compliance with § 63.113. (5) The results of tests, experiments, and any other analyses...

Biotoxicity of Mars Analog Soils: Microbial Dispersal into Desiccated Soils Versus Emplacement in Salt or Ice Inclusion Fluids

NASA Astrophysics Data System (ADS)

Schuerger, A. C.; Ming, D. W.; Golden, D. C.

2010-04-01

Six Mars analog soils were prepared to simulate a range of potentially biotoxic soils. Interactive effects of high-salt, desiccation, and low pressure were responsible for significant decreases in viable numbers of microbial species tested under martian conditions for 7 d.

10 CFR 50.82 - Termination of license.

Code of Federal Regulations, 2011 CFR

2011-01-01

... to the NRC, consistent with the requirements of § 50.4(b)(8); (ii) Once fuel has been permanently... fuel from the reactor vessel, or when a final legally effective order to permanently cease operations... emplacement or retention of fuel into the reactor vessel. (3) Decommissioning will be completed within 60...

Sensory Narratives: Capturing Embodiment in Narratives of Movement, Sport, Leisure and Health

ERIC Educational Resources Information Center

Hunter, Lisa; Emerald, Elke

2016-01-01

Narrative research has been employed by many researchers in the field of physical culture (including movement, play, dance, sport, leisure, physical pursuits, physical activity, physical education and health). From our storied worlds, narrative research reveals complex embodied and emplaced social phenomena within this field. However, there are…

Context Dependent Spectral Unmixing

DTIC Science & Technology

2014-08-01

the tar- get sizes). The targets were made of 100% cotton fabric and were emplaced so that there would be representatives of each color type completely...method for simplex-based endmember extraction algorithm,” IEEE Transactions on Geoscience and Re- mote Sensing, vol. 44, no. 10, pp. 2804–2819, 2006. [68

In situ biofilm coupon device

DOEpatents

Peyton, B.M.; Truex, M.J.

1997-06-24

An apparatus is disclosed for characterization of in-situ microbial biofilm populations in subsurface groundwater. The device permits biofilm-forming microorganisms to adhere to packing material while emplaced in a groundwater strata, so that the packing material can be later analyzed for quantity and type of microorganisms, growth rate, and nutrient requirements. 3 figs.

Evolution of Crater Glacier, Mount St. Helens, Washington, September 2006-November 2009

USGS Publications Warehouse

Walder, Joseph S.; Schilling, Steven P.; Sherrod, David R.; Vallance, James W.

2010-01-01

Lava-dome emplacement through a glacier was observed for the first time during the 2004-08 eruption of Mount St. Helens and documented using photography, photogrammetry, and geodetic measurements. Previously published reports present such documentation through September 2006; this report extends that documentation until November 2009.

Analyses of Rock Size-Frequency Distributions and Morphometry of Modified Hawaiian Lava Flows: Implications for Future Martian Landing Sites

NASA Technical Reports Server (NTRS)

Craddock, Robert A.; Golombek, Matthew; Howard, Alan D.

2000-01-01

Both the size-frequency distribution and morphometry of rock populations emplaced by a variety of geologic processes in Hawaii indicate that such information may be useful in planning future landing sites on Mars and interpreting the surface geology.

Predicting the Emplacement of Improvised Explosive Devices: An Innovative Solution

ERIC Educational Resources Information Center

Lerner, Warren D.

2013-01-01

In this quantitative correlational study, simulated data were employed to examine artificial-intelligence techniques or, more specifically, artificial neural networks, as they relate to the location prediction of improvised explosive devices (IEDs). An ANN model was developed to predict IED placement, based upon terrain features and objects…

New Directions, New Questions? Social Theory, Education and Embodiment

ERIC Educational Resources Information Center

Evans, John; Davies, Brian

2011-01-01

This paper introduces the contents of the special issue whose authors, in our view, together demonstrate the need for transdisciplinary study of body pedagogies focussed on embodiment, emplacement, enactment and subjectivity. We celebrate theoretical and methodological diversity in the social sciences while calling for "border crossings" between…

The Use of Molecular and Genomic Techniques Applied to Microbial Diversity, Community Structure, and Activities at DNAPL and Metal Contaminated Sites

EPA Science Inventory

A wide variety of in situ subsurface remediation strategies have been developed to mitigate contamination by chlorinated solvent dense non-aqueous phase liquids (DNAPLS) and metals. Geochemical methods include: zerovalent iron emplacement, various electrolytic applications, elec...

Detection of IED Emplacement in Urban Environments

DTIC Science & Technology

2008-09-01

confidence is achieved in the prediction. The scope of this thesis will be to conduct various experiments using wireless sensor network motes to detect the...A wireless sensor network configured with proper equipment provides useful results for detecting IEDs and shows potential for correctly predicting behavior associated personnel carrying IED material.

Role of fluid in the mechanism of formation of volcaniclastic and coherent kimberlite facies: a diamond perspective

NASA Astrophysics Data System (ADS)

Fedortchouk, Yana; Chinn, Ingrid

2016-04-01

Dissolution features on diamonds recovered from kimberlites vary depending on the dissolution conditions and can be used as a reliable proxy for volatiles and their role in kimberlite emplacement. Volatiles determine the mechanism of magma emplacement; variation in volatile content and CO2/CO2+H2O ratio may affect the geology of kimberlite bodies and formation of coherent vs. volcaniclastic kimberlite facies. Here we examine the evolution of a kimberlite system during ascent using the resorption morphology of its diamond population. We use 655 macro-diamonds from a complex kimberlite pipe in the Orapa kimberlite field (Botswana) to examine the role of volatiles in the formation of the three facies comprising this pipe: two coherent kimberlite facies (CKA and CKB) and one massive volcaniclastic facies (MVK). The diamonds come from three drillholes through each of the studied kimberlite facies. Separate diamond samples derived from 2 - 13 m intervals were combined into 40 m depth intervals for statistical purposes. Four independent morphological methods allowed us to reliably discriminate products of resorption in kimberlite magma from resorption in the mantle, and use the former in our study. We found that the proportion of diamonds with kimberlitic resorption is the lowest in CKA - 22%, medium in MVK - 50%, and highest in CKB - 73%, and it increases with depth in each of the drillholes. Each kimberlite facies shows its own style of kimberlite-induced resorption on rounded tetrahexahedron (THH) diamonds: glossy surfaces in MVK, rough corroded surfaces in CKB, and combination of glossy surfaces with chains of circular pits in CKA, where these pits represent the initial stages of development of corrosive features observed on CKB diamonds. Based on the results of our previous experimental studies we propose that resorption of MVK diamonds is a product of interaction with COH fluid, resorption of CKB diamonds is a product of interaction with a volatile-undersaturated melt (possibly carbonatitic), and CKA diamonds show an overprint of melt-controlled resorption over a fluid-controlled resorption. We propose an early separation of the fluid phase during the ascent of this kimberlite magma, segregation of this fluid and rise towards the top of the magma column. Over-pressurisation caused by the expansion of this fluid worked as a driving force for the magma ascent acceleration. The magma column has separated into two parts: (1) the bubble-rich magma towards the top, explosive emplacement of which formed the MVK facies, followed by the "tailing" bubble-poor magma quietly arriving to form the CKA facies, and (2) magma that lost volatiles to the upwardly escaping bubbles, in which a slower ascent caused more intensive diamond resorption and delayed emplacement, forming the CKB facie. It is possible that formation, buoyancy, and growth of fluid bubbles controls the ascent of the kimberlite magma, where emplacement of bubble-rich magma forms volcaniclastic kimberlite facies, while fast rise of the bubbles through the magma column separates the fluid-rich phase that moves up preparing the conduit in the surrounding rocks and forms an explosive pipe at the surface, from a volatile-depleted magma, which slowly rises and fills the pipe with CK kimberlite facies.

Glacitectonic rafting and associated deformation of mid-Pleistocene glacigenic sediments, near Central Graben, central North Sea; results of a 2D High-Resolution Geophysical Survey

NASA Astrophysics Data System (ADS)

Vaughan-Hirsch, David

2013-04-01

Glacitectonic rafts are defined as dislocated slabs of bedrock or unconsolidated sediments, transported from their original position by glacial action. These relatively thin, slab-like bodies feature transport distances ranging from tens of meters to hundreds of kilometers. They occur as either single rafts, or multiple stacked bodies associated with a variety of ice-pushed landforms. Internally, rafts frequently appear undeformed although at a larger scale, they may be folded or cut by shear zones and brittle faults. However, the processes leading to the detachment, transport and subsequent emplacement of the rafts remain uncertain. This work describes the results of a geophysical 2D seismic survey of thrust-bound glacitectonic rafts and associated deformation structures, occurring within mid-Pleistocene glacigenic sediments of the Central Graben, central North Sea. The total shortened length of the rafted section is 2.4km, comprising a series of nine discrete rafts which individually range from 235m to 1018m in length. The principle basal detachment occurs at the erosive contact between Aberdeen Ground Formation and overlying Ling Bank Formation. The ice-proximal (northern) limit of rafting is defined by the presence of a large-scale palaeo-channel oriented perpendicular to the direction of rafting, composed of sediments of the Ling Bank Formation and the Forth Formation. The observed deformation structures infer a mean tectonic direction of 178°, indicating that they are associated with an active glacial advance from the north. The resulting deformation creates a minimum lateral shortening throughout the observed sequence of 35%, typifying a strongly compressional regieme associated with rafting. Throughout the surveyed area, structurally younger rafts are found to be emplaced towards the south, compared to the structurally older rafts which are emplaced towards the south-east. This distinction is suggested to be caused by early rafts creating an obstacle to transport for later stages of deformation, resulting in strike-slip basal detachment being associated with the later rafts. Localised distributions of high amplitude surfaces located adjacent to the primary detachment surface are identified through amplitude extraction techniques. These are indicative of migration and collection of gas along the inclined lower surfaces of rafted blocks. They represent a gas risk for drilling operations and demonstrate the significance and possible hazards of glacitectonic deformation to the exploration industry. A model for raft detachment and emplacement is proposed whereby; i) saturated sediments within the palaeo-channel are subject to pressurisation associated with overburden caused by over-riding ice, ii) elevated pore-water pressure develops along the principle detachment surface of the rafts, iii) early stages of deformation consist of ice-distal (southern) blocks becoming emplaced at relatively low angles of inclination, iv) with more proximal blocks accumulating as an imbricate thrust-stack sequence at relatively high angles of elevation. This interpretation suggests a significant subglacial hydrological control upon raft detachment and transport, with fluctuations between an extensional and compressive deformation regime caused by a switch from actively advancing glacial conditions to an oscillating ice-margin at this location. Tectono-stratigraphic evidence indicates that rafting occurring throughout the site is likely to be associated with a glacial advance of the Anglian (MIS 12).

Nature and time of emplacement of a pegmatoidal granite within the Delhi Fold Belt near Bayalan, Rajasthan, India

NASA Astrophysics Data System (ADS)

Dasgupta, N.; Sen, J.; Pal, T.; Ghosh, T.

2009-04-01

The study area is situated about 70 km south east of Ajmer, in Rajasthan, India around the village Bayala (26o 02' 19 N''; 74o 21' 01'') within the Ajmer district of Central Rajasthan. The area is along the eastern flank of the central portion of the Precambrian South Delhi Fold Belt (SDFB) and it stratigraphically belongs to the Bhim Group of rocks. Basement rocks of Archaean age, commonly known as the Banded gneissic Complex (BGC), is exposed to the east, where the rocks of the Bhim Group rests unconformably over BGC. To the west gneissic basement rocks of mid-Proterozoic times underlie the Bhim Group and have been referred to as the Beawar gneiss (BG). The Bhim Group of rocks comprises of metamorphosed marls and calc-silicate gneisses with minor amounts of quartzites and pelitic schists, indicative of its shallow marine origin. Within the Bhim Group, a pegmatoidal granite has intruded the calc silicate gneisses of the area. The pegmatoidal granite body is elliptical in outline with the long dimension(20 km) trending N-S and covers an area of 300 sq. km. approximately. This granite have so far been mapped as basement rocks (BG) surrounding the Beawar town (26o 06' 05'' N; 74o 19' 03'' E), 50 km south east of Ajmer. Rafts of calc-silicate gneisses, belonging to the Bhim Group, are seen to be entrapped within granite. Fragments of BG and its equivalents have also been found as caught up blocks within this pegmatoidal granite body near Andheri Devari, a small hamlet east of Beawar. The objective of the study was to map this pegmatoidal body, and decipher the mechanism and time of emplacement of this granite. A detailed structural mapping of the area in a 1:20000 scale spread over a 30 sq. km area in the vicinity of Bayala was carried out to analyse the geometry and the time of emplacement of the pegmatitic granite. The ridges of calc silicates and marbles adjoining the area were studied for the structural analyses of the Delhi fold belt rocks of the area. The calc silicate gneisses of the Bhim Group have been deformed by three major phases of folding, namely D1, D2 and D3. Of these the D1 folds defined by transposed compositional layering are intrafolial and isoclinal in nature. The D2 folds are asymmetric with alternate steeply and gently easterly dipping limbs and are defined by compositional banding and schistosity (S1). A good compositional layering parallel to the S2 fabric has been observed within the calc silicate gneisses. The D2 folds are close to tight, gently plunging with a modal plunge of 20o towards 40o; and has an inclined axial plane which has an easterly vergence. This is the most dominant phase of deformation. The D3 folds have developed on the gentle limbs of the D2 folds with a horizontal axis on a vertical axial plane. Interference of the D1 with D2 and D1 with D3 has produced Type III type of interference pattern. The pegmatitic granite body is a coarse grained rock composed of quartz feldspar (dominantly K-feldspar), muscovite, biotite, and tourmaline. A weak foliation has developed within this rock which is parallel to the D3 axial planar structure found within the calc silicate gneisses. Thus from the structural study it is proposed that the pegmatitic granite was emplaced post-D2 and possibly syn D3. The presence of narrow planar zones of hornfelsic rocks parallel to the D3 axial plane within the calc silicate rocks also attests to the above fact. Therefore the D3 axial planes provided the necessary conduits of the granite fluid movement within the calcsilicate rocks. The intrusions have scaled off the calc silicate gneisses into large continuous pieces along the gneissosity plane and got emplaced along the hinges of the D2 and D3 folds. Though disturbed, it has been seen that the orientation of the structural elements within these ripped off blocks of the calc silicate gneisses were quite similar to those found within the ridges, unaffected by the granite. The granites were thus emplaced lit-par-lit in the country rocks and on their contact with the calc gneisses shows hornfelsic textures within the calcsilicates (Tremolite-actinolite schists). It is thought of that this pegmatoidal granite has a bearing in age with the wide scale granite activity seen within this region. The structural study shows that this pegmatitic granite was emplaced synchronous to the D3 deformation episode which is the last major recognizable deformation within the Delhi Orogeny. Therefore this pegmatitic granite marks the closing stages of the Delhi Orogeny. Combined with the 1 Ga age of the formation of crust, in the western segment of the Delhi basin, a proper dating of this granite could give us the exact time span of the delhi orogenic cycle.

10 CFR 60.111 - Performance of the geologic repository operations area through permanent closure.

Code of Federal Regulations, 2012 CFR

2012-01-01

... retrieval throughout the period during which wastes are being emplaced and, thereafter, until the completion of a preformance confirmation program and Commission review of the information obtained from such a... retrievability. (3) For purposes of this paragraph, a reasonable schedule for retrieval is one that would permit...

10 CFR 60.111 - Performance of the geologic repository operations area through permanent closure.

Code of Federal Regulations, 2013 CFR

2013-01-01

... retrieval throughout the period during which wastes are being emplaced and, thereafter, until the completion of a preformance confirmation program and Commission review of the information obtained from such a... retrievability. (3) For purposes of this paragraph, a reasonable schedule for retrieval is one that would permit...

10 CFR 60.111 - Performance of the geologic repository operations area through permanent closure.

Code of Federal Regulations, 2014 CFR

2014-01-01

... retrieval throughout the period during which wastes are being emplaced and, thereafter, until the completion of a preformance confirmation program and Commission review of the information obtained from such a... retrievability. (3) For purposes of this paragraph, a reasonable schedule for retrieval is one that would permit...

10 CFR 60.111 - Performance of the geologic repository operations area through permanent closure.

Code of Federal Regulations, 2011 CFR

2011-01-01

... retrieval throughout the period during which wastes are being emplaced and, thereafter, until the completion of a preformance confirmation program and Commission review of the information obtained from such a... retrievability. (3) For purposes of this paragraph, a reasonable schedule for retrieval is one that would permit...

A Choice Reaction Time Index of Callosal Anatomical Homotopy

ERIC Educational Resources Information Center

Desjardins, Sameul; Braun, Claude M. J.; Achim, Andre; Roberge, Carl

2009-01-01

Tachistoscopically presented bilateral stimulus pairs not parallel to the meridian produced significantly longer RTs on a task requiring discrimination of shapes (Go/no-Go) than pairs emplaced symmetrically on each side of the meridian in Desjardins and Braun [Desjardins, S., & Braun, C. M. J. (2006). Homotopy and heterotopy and the bilateral…

40 CFR 61.226 - Reconsideration of rescission and reinstatement of this subpart.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Emission Standards for Radon Emissions From the Disposal of Uranium Mill Tailings § 61.226 Reconsideration... by EPA and NRC or the tailings closure plan (radon) (i.e., contained in the license) requirements establishing milestones for the purpose of emplacing a permanent radon barrier that will achieve compliance...

Constraining the Timing of Lobate Debris Apron Emplacement at Martian Mid-Latitudes Using a Numerical Model of Ice Flow

NASA Astrophysics Data System (ADS)

Parsons, R. A.; Nimmo, F.

2010-03-01

SHARAD observations constrain the thickness and dust content of lobate debris aprons (LDAs). Simulations of dust-free ice-sheet flow over a flat surface at 205 K for 10-100 m.y. give LDA lengths and thicknesses that are consistent with observations.

Latino/a Youth Activism in Higher Education: A New Materialist Analysis of the Latino Graduation Ceremony

ERIC Educational Resources Information Center

Gildersleeve, Ryan Evely; Sifuentez, Brenda Jimenez

2017-01-01

In this paper, we entangle Latino/a youth activism with ritual culture in U.S. higher education. Specifically, we analyze ethnographically-generated data from Gildersleeve's (2015; 2016) study of Latino graduation ceremonies, emplacing our analyses within new materialist philosophy. We theorize the Latino graduation ceremony as assemblage…