DOE Office of Scientific and Technical Information (OSTI.GOV)

PNNL

Case study describes how the Army Reserve 9th Mission Support Command (MSC) reduced lighting energy consumption by 62% for a total savings of 125,000 kWh and more than $50,000 per year by replacing over 400 fluorescent troffers with 36 W LED troffers. This project was part of the Army Reserve Net Zero Pilot Program, initiated in 2013, to reduce energy and water consumption, waste generation, and utility costs.

The effectiveness of energy management system on energy efficiency in the building

NASA Astrophysics Data System (ADS)

Julaihi, F.; Ibrahim, S. H.; Baharun, A.; Affendi, R.; Nawi, M. N. M.

2017-10-01

Energy plays a key role in achieving the desired economic growth for the country. Worldwide industries use 40 percent energy for material and consumption protection to fulfil human needs which contributes almost 37 percent of global greenhouse gases emissions. One of the approach in order to reduce the emission of greenhouse gases to the environment is by conserving energy. This could be executed by implementing energy management especially in commercial and office buildings as daily electricity consumption is high in this type of building. Energy management can also increase the efficiency of energy in the building. Study has been conducted to investigate the performance on implementation of energy management system in office building. Energy management is one of the contemporary challenges, thus study adopts an exploratory approach by using a tool developed by UNIDO called EnMS or Energy Management System. Findings show that by implementing energy management can reduce electricity consumption up to 30%. However, serious initiatives by the organization are needed to promote the effectiveness of energy management.

Energy metabolism of broiler breeder hens. 2. Contribution of tissues to total heat production in fed and fasted hens.

PubMed

Spratt, R S; McBride, B W; Bayley, H S; Leeson, S

1990-08-01

In vitro rates of O2 consumption were investigated using excised biopsies from the liver, ileum, magnum, and latissimus dorsi muscle of Hubbard (H) broiler-breeder hens fed four levels of ME intake. Diet had no effect on O2 consumption of any tissue. The overall mean initial O2 consumption (microL of O2 per mg of dry weight per h) for latissimus dorsi, liver, ileum, and magnum tissues were 4.38, 13.33, 10.54, and 8.01, respectively. The Na+ and K(+)-adenosine triphosphatase-dependent respiration (ouabain-sensitive respiration) was 16% of the initial rate for latissimus dorsi, liver, and magnum tissues and 22% for ileum tissues. Fasting heat production of H and Arbor Acre (AA) meat-type hens measured over 3 days following an initial 24-h fast was 219 and 216 kilojoules (kJ) per kg per day (1 kJ = .239 kcal). There were no strain differences in the partitioning of O2 consumption into tissue components of fasted H and AA hens. Fasting metabolism accounted for 75% of the maintenance energy requirement in the hens. The liver, gut, and reproductive tract, which together make up 5 to 6% of BW, account for 26 and 30% of the total energy expenditure in fed and fasted hens, respectively.

Evaluation of energy consumption of treating nitrate-contaminated groundwater by bioelectrochemical systems.

PubMed

Cecconet, Daniele; Zou, Shiqiang; Capodaglio, Andrea G; He, Zhen

2018-09-15

Nitrate contamination of groundwater is a mounting concern for drinking water production due to its healthy and ecological effects. Bioelectrochemical systems (BES) are a promising method for energy efficient nitrate removal, but its energy consumption has not been well understood. Herein, we conducted a preliminary analysis of energy consumption based on both literature information and multiple assumptions. Four scenarios were created for the purpose of analysis based on two treatment approaches, microbial fuel cells (MFCs) and controlled biocathodic denitrification (CBD), under either in situ or ex situ deployment. The results show a specific energy consumption based on the mass of NO 3 - -N removed (SEC N ) of 0.341 and 1.602 kWh kg NO 3 - -N -1 obtained from in situ and ex situ treatments with MFCs, respectively; the main contributor was the extraction of the anolyte (100%) in the former and pumping the groundwater (74.8%) for the latter. In the case of CBD treatment, the energy consumption by power supply outcompeted all the other energy items (over 85% in all cases), and a total SEC N of 19.028 and 10.003 kWh kg NO 3 - -N -1 were obtained for in situ and ex situ treatments, respectively. The increase in the water table depth (from 10 to 30 m) and the decrease of the nitrate concentration (from 25 to 15 mg NO 3 - -N) would lead to a rise in energy consumption in the ex situ treatment. Although some data might be premature due to the lack of sufficient information in available literature, the results could provide an initial picture of energy consumption by BES-based groundwater treatment and encourage further thinking and analysis of energy consumption (and production). Copyright © 2018 Elsevier B.V. All rights reserved.

Prediction and Analysis of CO2 Emission in Chongqing for the Protection of Environment and Public Health

PubMed Central

Yang, Shuai; Wang, Yu; Ao, Wengang; Bai, Yun; Li, Chuan

2018-01-01

Based on the consumption of fossil energy, the CO2 emissions of Chongqing are calculated and analyzed from 1997 to 2015 in this paper. Based on the calculation results, the consumption of fossil fuels and the corresponding CO2 emissions of Chongqing in 2020 are predicted, and the supporting data and corresponding policies are provided for the government of Chongqing to reach its goal as the economic unit of low-carbon emission in the ‘13th Five-Year Plan’. The results of the analysis show that there is a rapid decreasing trend of CO2 emissions in Chongqing during the ‘12th Five-Year Plan’, which are caused by the adjustment policy of the energy structure in Chongqing. Therefore, the analysis and prediction are primarily based on the adjustment of Chongqing’s coal energy consumption in this paper. At the initial stage, support vector regression (SVR) method is applied to predict the other fossil energy consumption and the corresponding CO2 emissions of Chongqing in 2020. Then, with the energy intensity of 2015 and the official target of CO2 intensity in 2020, the total fossil energy consumption and CO2 emissions of Chongqing in 2020 are predicted respectively. By the above results of calculation, the coal consumption and its corresponding CO2 emissions of Chongqing in 2020 are determined. To achieve the goal of CO2 emissions of Chongqing in 2020, the coal consumption level and energy intensity of Chongqing are calculated, and the adjustment strategies for energy consumption structure in Chongqing are proposed. PMID:29547505

Whole-Home Dehumidifiers: Field-Monitoring Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burke, Tom; Willem, Henry; Ni, Chun Chun

2014-09-23

Lawrence Berkeley National Laboratory (LBNL) initiated a WHD field-metering study to expand current knowledge of and obtain data on WHD operation and energy consumption in real-world applications. The field study collected real-time data on WHD energy consumption, along with information regarding housing characteristics, consumer behavior, and various outdoor conditions expected to affect WHD performance and efficiency. Although the metering study collected similar data regarding air conditioner operation, this report discusses only WHDs. The primary objectives of the LBNL field-metering study are to (1) expand knowledge of the configurations, energy consumption profiles, consumer patterns of use (e.g., relative humidity [RH] settings),more » and environmental parameters of whole-home dehumidification systems; and (2) develop distributions of hours of dehumidifier operation in four operating modes: off, standby, fan-only, and compressor (also called dehumidification mode). Profiling energy consumption entails documenting the power consumption, duration of power consumption in different modes, condensate generation, and properties of output air of an installed system under field conditions of varying inlet air temperature and RH, as well as system configuration. This profiling provides a more detailed and deeper understanding of WHD operation and its complexities. This report describes LBNL’s whole-home dehumidification field-metering study conducted at four homes in Wisconsin and Florida. The initial phase of the WHD field-metering study was conducted on one home in Madison, Wisconsin, from June to December of 2013. During a second phase, three Florida homes were metered from June to October of 2014. This report presents and examines data from the Wisconsin site and from the three Florida sites.« less

Improving energy sustainability for public buildings in Italian mountain communities.

PubMed

Mutani, Guglielmina; Cornaglia, Mauro; Berto, Massimo

2018-05-01

The objective of this work is to analyze and then optimize thermal energy consumptions of public buildings located within the mountain community of Lanzo, Ceronda and Casternone Valleys. Some measures have been proposed to reduce energy consumption and consequently the economic cost for energy production, as well as the harmful GHG emissions in the atmosphere. Initially, a study of the mountain territory has been carried out, because of its vast extension and climatic differences. Defined the communities and the buildings under investigation, energy dependant data were collected for the analysis of energy consumption monitoring: consumption data of three heating seasons, geometric buildings characteristics, type of opaque and transparent envelope, heating systems information with boiler performance and climatic data. Afterward, five buildings with critical energy performances were selected; for each of these buildings, different retrofit interventions have been hypothesized to reduce the energy consumption, with thermal insulation of vertical or horizontal structures, new windows or boiler substitution. The cost-optimal technique was used to choose the interventions that offered higher energy performance at lower costs; then a retrofit scenario has been planned with a specific financial investment. Finally, results showed possible future developments and scenarios related to buildings energy efficiency with regard to the topic of biomass exploitation and its local availability in this area. In this context, the biomass energy resource could to create a virtuous environmental, economic and social process, favouring also local development.

Breakthroughs Move Researchers One Step Closer to $35 Billion Fuel Savings

Science.gov Websites

representative blendstocks from five chemical families with the greatest promise for reducing energy consumption (Co-Optima) initiative. This national research effort is providing industry with the scientific consumption, improve air quality, and lower drivers' costs. Two new studies reveal how fundamental research

Effectiveness of In-Home Feedback Devices in Conjunction with Energy Use Information on Residential Energy Consumption

NASA Astrophysics Data System (ADS)

Rungta, Shaily

Residential energy consumption accounts for 22% of the total energy use in the United States. The consumer's perception of energy usage and conservation are very inaccurate which is leading to growing number of individuals who try to seek out ways to use energy more wisely. Hence behavioral change in consumers with respect to energy use, by providing energy use feedback may be important in reducing home energy consumption. Real-time energy information feedback delivered via technology along with feedback interventions has been reported to produce up to 20 percent declines in residential energy consumption through past research and pilot studies. There are, however, large differences in the estimates of the effect of these different types of feedback on energy use. As part of the Energize Phoenix Program, (a U.S. Department of Energy funded program), a Dashboard Study was conducted by the Arizona State University to estimate the impact of real-time, home-energy displays in conjunction with other feedback interventions on the residential rate of energy consumption in Phoenix, while also creating awareness and encouragement to households to reduce energy consumption. The research evaluates the effectiveness of these feedback initiatives. In the following six months of field experiment, a selected number of low-income multi-family apartments in Phoenix, were divided in three groups of feedback interventions, where one group received residential energy use related education and information, the second group received the same education as well as was equipped with the in-home feedback device and the third was given the same education, the feedback device and added budgeting information. Results of the experiment at the end of the six months did not lend a consistent support to the results from literature and past pilot studies. The data revealed a statistically insignificant reduction in energy consumption for the experiment group overall and inconsistent results for individual households when compared to a randomly selected control sample. However, as per the participant survey results, the study proved effective to foster awareness among participating residents of their own patterns of residential electricity consumption and understanding of residential energy use related savings.

Performance analysis of a continuous serpentine flow reactor for electrochemical oxidation of synthetic and real textile wastewater: Energy consumption, mass transfer coefficient and economic analysis.

PubMed

Pillai, Indu M Sasidharan; Gupta, Ashok K

2017-05-15

A continuous flow electrochemical reactor was developed, and its application was tested for the treatment of textile wastewater. A parallel plate configuration with serpentine flow was chosen for the continuous flow reactor. Uniparameter optimization was carried out for electrochemical oxidation of synthetic and real textile wastewater (collected from the inlet of the effluent treatment plant). Chemical Oxygen Demand (COD) removal efficiency of 90% was achieved for synthetic textile wastewater (initial COD - 780 mg L -1 ) at a flow rate of 500 mL h -1 (retention time of 6 h) and a current density of 1.15 mA cm -2 and the energy consumption for the degradation was 9.2 kWh (kg COD) -1 . The complete degradation of real textile wastewater (initial COD of 368 mg L -1 ) was obtained at a current density of 1.15 mA cm -2 , NaCl concentration of 1 g L -1 and retention time of 6 h. Energy consumption and mass transfer coefficient of the reactions were calculated. The continuous flow reactor performed better than batch reactor with reference to energy consumption and economy. The overall treatment cost for complete COD removal of real textile wastewater was 5.83 USD m -3 . Copyright © 2017 Elsevier Ltd. All rights reserved.

Total energy management for nursing homes and other long-term care institutions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1977-01-01

The purpose of this publication is to provide the basic instruction needed to implement the most effective form of energy conservation--Total Energy Management, or TEM--in your long-term care facility. The effort required is worthwhile for many different reasons: TEM is self-paying; TEM promotes energy conservation without negative impact on health care services; and energy costs will continue to escalate. Following the introductory chapter, chapters are titled: Understanding Energy Consumption; Initiating a Total Energy Management Program; Developing Energy Consumption Data; Conducting the Facility Survey; Developing and Implementing the Basic Plan; Communication and Motivation; Monitoring Your Program and Keeping It Effective; andmore » Guidelines for Energy Conservation. Two appendices furnish information on building information for TEM and sources of information for energy management. (MCW)« less

Bipolar membrane electrodialysis for generation of hydrochloric acid and ammonia from simulated ammonium chloride wastewater.

PubMed

Li, Ya; Shi, Shaoyuan; Cao, Hongbin; Wu, Xinmin; Zhao, Zhijuan; Wang, Liying

2016-02-01

Simulated ammonium chloride wastewater was treated by a lab-scale bipolar membrane electrodialysis for the generation of HCl and NH3·H2O and desalination. The influence of initial concentration of NH4Cl, current density, salt solution volume, initial concentration of acid and base and membrane stack structure on the yields of HCl and NH3·H2O was investigated. The current efficiency and energy consumption were also examined under different conditions. The results showed that, at the current density of 48 mA/cm(2), the highest concentration of HCl and NH3·H2O with initial concentration of 110 g/L NH4Cl was 57.67 g/L and 45.85 g/L, respectively. Higher initial concentration of NH4Cl was favor to reduce unit energy consumption and increase current efficiency of the BMED system. The membrane stack voltage of BMED increased quickly under constant current when the concentration of NH4Cl contained in the solution of salt compartment was depleted below the "inflection point concentration" about 8000 mg/L. It means that the concentration of NH4Cl below 8000 mg/L was no longer suitable for BMED because of higher energy consumption. The HCl and NH3·H2O concentration increased more quickly following the increase of current density. When increasing the volume of NH4Cl, the concentration of HCl and NH3·H2O also increased. The high initial concentration of acid and base could improve the final concentration of them, while the growth rate was decreased. Compared with the BMED system with three compartments, the growth rate of HCl concentration with the two compartments was higher and its unit energy consumption was lower. It meant that the performance of the BMED system could be improved by optimizing operation conditions. The application feasibility of the generation of HCl and NH3·H2O and desalination of ammonium chloride wastewater by BMED was proved. Copyright © 2015 Elsevier Ltd. All rights reserved.

Lean energy analysis of CNC lathe

NASA Astrophysics Data System (ADS)

Liana, N. A.; Amsyar, N.; Hilmy, I.; Yusof, MD

2018-01-01

The industrial sector in Malaysia is one of the main sectors that have high percentage of energy demand compared to other sector and this problem may lead to the future power shortage and increasing the production cost of a company. Suitable initiatives should be implemented by the industrial sectors to solve the issues such as by improving the machining system. In the past, the majority of the energy consumption in industry focus on lighting, HVAC and office section usage. Future trend, manufacturing process is also considered to be included in the energy analysis. A study on Lean Energy Analysis in a machining process is presented. Improving the energy efficiency in a lathe machine by enhancing the cutting parameters of turning process is discussed. Energy consumption of a lathe machine was analyzed in order to identify the effect of cutting parameters towards energy consumption. It was found that the combination of parameters for third run (spindle speed: 1065 rpm, depth of cut: 1.5 mm, feed rate: 0.3 mm/rev) was the most preferred and ideal to be used during the turning machining process as it consumed less energy usage.

Is Efficiency Enough? Towards a New Framework for Carbon Savingsin the California Residential Sector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moezzi, Mithra; Diamond, Rick

2005-10-01

The overall implementation of energy efficiency in the United States is not adequately aligned with the environmental benefits claimed for efficiency, because it does not consider absolute levels of energy use, pollutant emissions, or consumption. In some ways, promoting energy efficiency may even encourage consumption. A more effective basis for environmental policy could be achieved by recognizing the degree and nature of the synchronization between environmental objectives and efficiency. This research seeks to motivate and initiate exploration of alternative ways of defining efficiency or otherwise moderating energy use toward reaching environmental objectives, as applicable to residential electricity use in California.more » The report offers three main recommendations: (1) produce definitions of efficiency that better integrate absolute consumption, (2) attend to the deeper social messages of energy efficiency communications, and (3) develop a more critical perspective on benefits and limitations of energy efficiency for delivering environmental benefits. In keeping with the exploratory nature of this project, the report also identifies ten questions for further investigation.« less

Reduction of lighting energy consumption in office buildings through improved daylight design

NASA Astrophysics Data System (ADS)

Papadouri, Maria Violeta Prado

This study aims to investigate the lighting energy consumption in office buildings and the options for its reduction. One way to reduce lighting energy consumption is by improving the daylight design. A better use of daylight in buildings might be an outcome from the effort made in different directions. Like the improvement of a building's fabric and layout, the materials, even the furniture in a space influences the daylight quality considerably. Also very important role in lighting energy consumption has the development of more efficient lighting technology like the electric lighting control systems, such as photo sensors and occupancy sensors. Both systems are responsible so that the electric light is not used without reason. As the focusing area of this study, is to find ways to improve the daylight use in buildings, a consequent question is which are the methods provided in order to achieve this The accuracy of the methodology used is also an important issue in order to achieve reliable results. The methodology applied in this study includes the analysis of a case study by taking field measurements and computer simulations. The first stage included gathering information about the lighting design of the building and monitoring the light levels, both from natural and from the electric lighting. The second stage involved testing with computer simulations, different parameters that were expected to improve the daylight exploitation of the specific area. The results of the field measurements showed that the main problems of the space were the low natural light levels and the poor daylight distribution. The annual electric lighting energy consumption, as it was calculated with the use of computer simulations, represented the annual energy consumption of a typical air-conditioned prestige office building (energy consumption guide 19, for energy use in offices, 2000). After several computer simulations, the results showed that initial design parameters of the building can affect the lighting energy consumption of the space significantly. On the other hand, relatively small changes, like changing the reflectance of the surfaces and the lighting control systems can make even more difference to the light quality of the space and the reduction of lighting energy consumption.

Dynamic impact of urbanization, economic growth, energy consumption, and trade openness on CO 2 emissions in Nigeria.

PubMed

Ali, Hamisu Sadi; Law, Siong Hook; Zannah, Talha Ibrahim

2016-06-01

The objective of this paper is to examine the dynamic impact of urbanization, economic growth, energy consumption, and trade openness on CO 2 emissions in Nigeria based on autoregressive distributed lags (ARDL) approach for the period of 1971-2011. The result shows that variables were cointegrated as null hypothesis was rejected at 1 % level of significance. The coefficients of long-run result reveal that urbanization does not have any significant impact on CO 2 emissions in Nigeria, economic growth, and energy consumption has a positive and significant impact on CO 2 emissions. However, trade openness has negative and significant impact on CO 2 emissions. Consumption of energy is among the main determinant of CO 2 emissions which is directly linked to the level of income. Despite the high level of urbanization in the country, consumption of energy still remains low due to lower income of the majority populace and this might be among the reasons why urbanization does not influence emissions of CO 2 in the country. Initiating more open economy policies will be welcoming in the Nigerian economy as the openness leads to the reduction of pollutants from the environment particularly CO 2 emissions which is the major gases that deteriorate physical environment.

[Research on carbon reduction potential of electric vehicles for low-carbon transportation and its influencing factors].

PubMed

Shi, Xiao-Qing; Li, Xiao-Nuo; Yang, Jian-Xin

2013-01-01

Transportation is the key industry of urban energy consumption and carbon emissions. The transformation of conventional gasoline vehicles to new energy vehicles is an important initiative to realize the goal of developing low-carbon city through energy saving and emissions reduction, while electric vehicles (EV) will play an important role in this transition due to their advantage in energy saving and lower carbon emissions. After reviewing the existing researches on energy saving and emissions reduction of electric vehicles, this paper analyzed the factors affecting carbon emissions reduction. Combining with electric vehicles promotion program in Beijing, the paper analyzed carbon emissions and reduction potential of electric vehicles in six scenarios using the optimized energy consumption related carbon emissions model from the perspective of fuel life cycle. The scenarios included power energy structure, fuel type (energy consumption per 100 km), car type (CO2 emission factor of fuel), urban traffic conditions (speed), coal-power technologies and battery type (weight, energy efficiency). The results showed that the optimized model was able to estimate carbon emissions caused by fuel consumption more reasonably; electric vehicles had an obvious restrictive carbon reduction potential with the fluctuation of 57%-81.2% in the analysis of six influencing factors, while power energy structure and coal-power technologies play decisive roles in life-cycle carbon emissions of electric vehicles with the reduction potential of 78.1% and 81.2%, respectively. Finally, some optimized measures were proposed to reduce transport energy consumption and carbon emissions during electric vehicles promotion including improving energy structure and coal technology, popularizing energy saving technologies and electric vehicles, accelerating the battery R&D and so on. The research provides scientific basis and methods for the policy development for the transition of new energy vehicles in low-carbon transport.

Adolescent energy drink consumption: An Australian perspective.

PubMed

Costa, Beth M; Hayley, Alexa; Miller, Peter

2016-10-01

Caffeinated Energy Drinks (EDs) are not recommended for consumption by children, yet there is a lack of age-specific recommendations and restrictions on the marketing and sale of EDs. EDs are increasingly popular among adolescents despite growing evidence of their negative health effects. In the current study we examined ED consumption patterns among 399 Australian adolescents aged 12-18 years. Participants completed a self-report survey of consumption patterns, physiological symptoms, and awareness of current ED consumption guidelines. Results indicated that ED consumption was common among the sample; 56% reported lifetime ED consumption, with initial consumption at mean age 10 (SD = 2.97). Twenty-eight percent of the sample consumed EDs at least monthly, 36% had exceeded the recommended two standard EDs/day, and 56% of consumers had experienced negative physiological health effects following ED consumption. The maximum number of EDs/day considered appropriate for children, adolescents, and adults varied, indicating a lack of awareness of current consumption recommendations. These findings add to the growing body of international evidence of adolescent ED consumption, and the detrimental impact of EDs to adolescent health. Enforced regulation and restriction of EDs for children's and adolescents' consumption is urgently needed in addition to greater visibility of ED consumption recommendations. Copyright © 2016 Elsevier Ltd. All rights reserved.

Prevalence, side effects and awareness about energy drinks among the female university students in Saudi Arabia

PubMed Central

Rahamathulla, Mohamudha Parveen

2017-01-01

Objective: To evaluate the consumption, prevalence, side effects and awareness of energy drinks among female university students in Saudi Arabia. Methods: A quantitative research design was implied with sample size of 358 female students, recruited from Prince Sattam bin Abdulaziz University. The data, gathered through self-administered questionnaire, was analyzed through SPSS version 20.0 with p value <0.005 deemed statistically significant. Results: From the sample of 358 female students, 337 attempted the questionnaire from which 274 students were identified as energy drink consumers. The reasons for increased consumption of energy drinks mainly include giving company to friends (59.4%), better performance in exams (41.2%), and better concentration in studies (39.4%). The most common side effect was headache (32.3%), and the least was identified as allergy (2%). Only 39.4% and 29.9% of students acquired awareness regarding the harmful effects of energy drink consumption during pregnancy and breast feeding respectively. Conclusion: A significant proportion of female students at Prince Sattam bin Abdulaziz have reported to consume energy drinks regularly with several adverse effects. The government of Saudi Arabia should take serious initiatives towards organizing effective awareness programs specifically in universities and colleges to control the consumption of energy drinks and educate on the adverse effects. PMID:28523035

Prevalence, side effects and awareness about energy drinks among the female university students in Saudi Arabia.

PubMed

Rahamathulla, Mohamudha Parveen

2017-01-01

To evaluate the consumption, prevalence, side effects and awareness of energy drinks among female university students in Saudi Arabia. A quantitative research design was implied with sample size of 358 female students, recruited from Prince Sattam bin Abdulaziz University. The data, gathered through self-administered questionnaire, was analyzed through SPSS version 20.0 with p value <0.005 deemed statistically significant. From the sample of 358 female students, 337 attempted the questionnaire from which 274 students were identified as energy drink consumers. The reasons for increased consumption of energy drinks mainly include giving company to friends (59.4%), better performance in exams (41.2%), and better concentration in studies (39.4%). The most common side effect was headache (32.3%), and the least was identified as allergy (2%). Only 39.4% and 29.9% of students acquired awareness regarding the harmful effects of energy drink consumption during pregnancy and breast feeding respectively. A significant proportion of female students at Prince Sattam bin Abdulaziz have reported to consume energy drinks regularly with several adverse effects. The government of Saudi Arabia should take serious initiatives towards organizing effective awareness programs specifically in universities and colleges to control the consumption of energy drinks and educate on the adverse effects.

The significance of renewable energy use for economic output and environmental protection: evidence from the Next 11 developing economies.

PubMed

Paramati, Sudharshan Reddy; Sinha, Avik; Dogan, Eyup

2017-05-01

Increasing economic activities in developing economies raise demand for energy mainly sourced from conventional sources. The consumption of more conventional energy will have a significant negative impact on the environment. Therefore, attention of policy makers has recently shifted towards the promotion of renewable energy generation and uses across economic activities to ensure low carbon economy. Given the recent scenario, in this paper, we aim to examine the role of renewable energy consumption on the economic output and CO 2 emissions of the next fastest developing economies of the world. The study employs several robust panel econometric models by using annual data from 1990 to 2012. Empirical findings confirm the significant long-run association among the variables. Similarly, results show that renewable energy consumption positively contributes to economic output and has an adverse effect on CO 2 emissions. Given our findings, we suggest policy makers of those economies to initiate further effective policies to promote more renewable energy generation and uses across economic activities to ensure sustainable economic development.

Effect of some operational parameters on the arsenic removal by electrocoagulation using iron electrodes

PubMed Central

2014-01-01

Arsenic contamination of drinking water is a global problem that will likely become more apparent in future years as scientists and engineers measure the true extent of the problem. Arsenic poisoning is preventable though as there are several methods for easily removing even trace amounts of arsenic from drinking water. In the present study, electrocoagulation was evaluated as a treatment technology for arsenic removal from aqueous solutions. The effects of parameters such as initial pH, current density, initial concentration, supporting electrolyte type and stirring speed on removal efficiency were investigated. It has been observed that initial pH was highly effective on the arsenic removal efficiency. The highest removal efficiency was observed at initial pH = 4. The obtained experimental results showed that the efficiency of arsenic removal increased with increasing current density and decreased with increasing arsenic concentration in the solution. Supporting electrolyte had not significant effects on removal, adding supporting electrolyte decreased energy consumption. The effect of stirring speed on removal efficiency was investigated and the best removal efficiency was at the 150 rpm. Under the optimum conditions of initial pH 4, current density of 0.54 mA/cm2, stirring speed of 150 rpm, electrolysis time of 30 minutes, removal was obtained as 99.50%. Energy consumption in the above conditions was calculated as 0.33 kWh/m3. Electrocoagulation with iron electrodes was able to bring down 50 mg/L arsenic concentration to less than 10 μg/L at the end of electrolysis time of 45 minutes with low electrical energy consumption as 0.52 kWh/m3. PMID:24991426

Energy use and conservation trends, 1972--1986

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klan, M.S.; Belzer, D.B.; Marsh, S.J.

1989-02-01

US trends in energy use and conservation since 1972 are analyzed in this report. That year represents the last year prior to significant energy price shocks. In 1986, an estimated 31.8 quads has been saved in the US compared with what consumption would have been if the energy use per dollar of GNP had continued on the same trend after 1972 as in the period 1960--1972. Actual US energy consumption in 1986 was 74.3 quads. It is clear that energy conservation is persistent and conservation investments continue to pay off even after initial energy price shocks have subsided. Separate analysesmore » have been conducted for the major end-use sectors (residential, commercial, industrial, and transportation). Savings have been estimated in each sector, and the factors contributing to sectoral savings identified. 19 refs., 23 figs., 26 tabs.« less

Energy demand and environmental implications in urban transport — Case of Delhi

NASA Astrophysics Data System (ADS)

Bose, Ranjan Kumar

A simple model of passenger transport in the city of Delhi has been developed using a computer-based software called—Long Range Energy Alternatives Planning (LEAP) and the associated Environmental Database (EDB) model. The hierarchical structure of LEAP represents the traffic patterns in terms of passenger travel demand, mode (rail/road), type of vehicle and occupancy (persons per vehicle). Transport database in Delhi together with fuel consumption values for the vehicle types, formed the basis of the transport demand and energy consumption calculations. Emission factors corresponding to the actual vehicle types and driving conditions in Delhi is introduced into the EDB and linked to the energy consumption values for estimating total emission of CO, HC, NO x, SO 2 Pb and TSP. The LEAP model is used to estimate total energy demand and the vehicular emissions for the base year-1990/91 and extrapolate for the future—1994/95, 2000/01, 2004/05 and 2009/10, respectively. The model is run under five alternative scenarios to study the impact of different urban transport policy initiatives that would reduce total energy requirement in the transport sector of Delhi and also reduce emission. The prime objective is to arrive at an optimal transport policy which limits the future growth of fuel consumption as well as air pollution.

Joint Energy Supply and Routing Path Selection for Rechargeable Wireless Sensor Networks.

PubMed

Tang, Liangrui; Cai, Jinqi; Yan, Jiangyu; Zhou, Zhenyu

2018-06-17

The topic of network lifetime has been attracting much research attention because of its importance in prolonging the standing operation of battery-restricted wireless sensor networks, and the rechargeable wireless sensor network has emerged as a promising solution. In this paper, we propose a joint energy supply and routing path selection algorithm to extend the network lifetime based on an initiative power supply. We develop a two-stage energy replenishment strategy to supplement the energy consumption of nodes as much as possible. Furthermore, the influence of charging factors on the selection of next-hop nodes in data routing is considered. The simulation results show that our algorithm effectively prolong the network lifetime, and different demands of network delay and energy consumption can be obtained by dynamically adjusting parameters.

Optimization of electrocoagulation (EC) process for the purification of a real industrial wastewater from toxic metals.

PubMed

Gatsios, Evangelos; Hahladakis, John N; Gidarakos, Evangelos

2015-05-01

In the present work, the efficiency evaluation of electrocoagulation (EC) in removing toxic metals from a real industrial wastewater, collected from Aspropyrgos, Athens, Greece was investigated. Manganese (Mn), copper (Cu) and zinc (Zn) at respective concentrations of 5 mg/L, 5 mg/L and 10 mg/L were present in the wastewater (pH=6), originated from the wastes produced by EBO-PYRKAL munitions industry and Hellenic Petroleum Elefsis Refineries. The effect of operational parameters such as electrode combination and distance, applied current, initial pH and initial metal concentration, was studied. The results indicated that Cu and Zn were totally removed in all experiments, while Mn exhibited equally high removal percentages (approximately 90%). Decreasing the initial pH and increasing the distance between electrodes, resulted in a negative effect on the efficiency and energy consumption of the process. On the other hand, increasing the applied current, favored metal removal but resulted in a power consumption increase. Different initial concentrations did not affect metal removal efficiency. The optimal results, regarding both cost and EC efficiency, were obtained with a combination of iron electrodes, at 2 cm distance, at initial current of 0.1 A and pH=6. After 90 min of treatment, maximum removal percentages obtained were 89% for Mn, 100% for Cu and 100% for Zn, at an energy consumption of 2.55 kWh/m(3). Copyright © 2015 Elsevier Ltd. All rights reserved.

Energy Costs and Energy Conservation Programs in Colleges and Universities: 1972-73, 1974-75. Higher Education Panel Reports, Number 31.

ERIC Educational Resources Information Center

Atelsek, Frank J.; Gomberg, Irene L.

A survey was initiated at the request of the U.S. Office of Education and the Energy Task Force to: (1) measure the increase in energy expenditures since the OPEC oil embargo of 1973-74; (2) assess changes in energy consumption over a two-year period; and (3) examine some of the specific conservation practices of higher education institutions.…

Annual energy outlook 1991 with projections to 2010

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-03-01

The report examines a range of scenarios by considering and comparing the effects of three selected variations from a reference case. Fundamental forces that determine the direction of energy markets will remain in effect. Recent events and high prices may have some residual impacts on Government policy, industrial energy planners, and consumers. Higher oil prices could stimulate interest in conservation and renewable energy and encourage growth in domestic energy production capacity. United States energy consumption has held steady for the third year in a row. Oil imports increased and use of electrical power increased. Legislative initiatives could set in motionmore » significant changes in energy markets world wide. A proposed National Energy Strategy has primary goals of economic growth, energy security and environmental improvement. Energy resources and energy uses of the United States are discussed. Energy resources include petroleum, natural gas, coal, and renewable energy sources. Statistical data is presented in various tables and graphs for energy consumption by end use sector. (JF)« less

Annual energy outlook 1991 with projections to 2010

NASA Astrophysics Data System (ADS)

1991-03-01

The report examines a range of scenarios by considering and comparing the effects of three selected variations from a reference case. Fundamental forces that determine the direction of energy markets will remain in effect. Recent events and high prices may have some residual impacts on Government policy, industrial energy planners, and consumers. Higher oil prices could stimulate interest in conservation and renewable energy and encourage growth in domestic energy production capacity. United States energy consumption has held steady for the third year in a row. Oil imports increased and use of electrical power increased. Legislative initiatives could set in motion significant changes in energy markets world wide. A proposed National Energy Strategy has primary goals of economic growth, energy security and environmental improvement. Energy resources and energy uses of the United States are discussed. Energy resources include petroleum, natural gas, coal, and renewable energy sources. Statistical data is presented in various tables and graphs for energy consumption by end use sector.

Associations between smoking and caffeine consumption in two European cohorts

PubMed Central

Taylor, Amy E.; Ware, Jennifer J.; McMahon, George; Hottenga, Jouke‐Jan; Baselmans, Bart M. L.; Willemsen, Gonneke; Boomsma, Dorret I.; Munafò, Marcus R.; Vink, Jacqueline M.

2016-01-01

Abstract Aims To estimate associations between smoking initiation, smoking persistence and smoking heaviness and caffeine consumption in two population‐based samples from the Netherlands and the United Kingdom. Design Observational study employing data on self‐reported smoking behaviour and caffeine consumption. Setting Adults from the general population in the Netherlands and the United Kingdom. Participants Participants from the Netherlands Twin Register [NTR: n = 21 939, mean age 40.8, standard deviation (SD) = 16.9, 62.6% female] and the Avon Longitudinal Study of Parents and Children (ALSPAC: n = 9086, mean age 33.2, SD = 4.7, 100% female). Measurements Smoking initiation (ever versus never smoking), smoking persistence (current versus former smoking), smoking heaviness (number of cigarettes smoked) and caffeine consumption in mg per day through coffee, tea, cola and energy drinks. Findings After correction for age, gender (NTR), education and social class (ALSPAC), smoking initiation was associated with consuming on average 52.8 [95% confidence interval (CI) = 45.6–60.0; NTR] and 59.5 (95% CI = 51.8–67.2; ALSPAC) mg more caffeine per day. Smoking persistence was also associated with consuming more caffeine [+57.9 (95% CI = 45.2–70.5) and +83.2 (95% CI = 70.2–96.3) mg, respectively]. Each additional cigarette smoked per day was associated with 3.7 (95% CI = 1.9–5.5; NTR) and 8.4 (95% CI = 6.9–10.0; ALSPAC) mg higher daily caffeine consumption in current smokers. Smoking was associated positively with coffee consumption and less strongly with cola and energy drinks. For tea, associations were positive in ALSPAC and negative in NTR. Conclusions There appears to be a positive association between smoking and caffeine consumption in the Netherlands and the United Kingdom. PMID:26750569

JPRS Report, Science & Technology, Japan

DTIC Science & Technology

1987-10-27

large untapped deposits of low-grade coal in such countries as Thailand and Indonesia . China has large shares of both the production and consumption...their supply and demand situations well balanced. Among these nations, production and consumption of coal are also well balanced, and there are...of coal in this region. Among other energy sources, natural gas is still in the initial stages of development and utilization, and hydropower

Research on laser detonation pulse circuit with low-power based on super capacitor

NASA Astrophysics Data System (ADS)

Wang, Hao-yu; Hong, Jin; He, Aifeng; Jing, Bo; Cao, Chun-qiang; Ma, Yue; Chu, En-yi; Hu, Ya-dong

2018-03-01

According to the demand of laser initiating device miniaturization and low power consumption of weapon system, research on the low power pulse laser detonation circuit with super capacitor. Established a dynamic model of laser output based on super capacitance storage capacity, discharge voltage and programmable output pulse width. The output performance of the super capacitor under different energy storage capacity and discharge voltage is obtained by simulation. The experimental test system was set up, and the laser diode of low power pulsed laser detonation circuit was tested and the laser output waveform of laser diode in different energy storage capacity and discharge voltage was collected. Experiments show that low power pulse laser detonation based on super capacitor energy storage circuit discharge with high efficiency, good transient performance, for a low power consumption requirement, for laser detonation system and low power consumption and provide reference light miniaturization of engineering practice.

Soda Consumption During Ad Libitum Food Intake Predicts Weight Change

PubMed Central

Bundrick, Sarah C.; Thearle, Marie S.; Venti, Colleen A.; Krakoff, Jonathan; Votruba, Susanne B.

2013-01-01

Soda consumption may contribute to weight gain over time. Objective data were used to determine whether soda consumption predicts weight gain or changes in glucose regulation over time. Subjects without diabetes (128 men, 75 women; mean age 34.3±8.9 years; mean body mass index [BMI] 32.5±7.4; mean percentage body fat 31.6%±8.6%) self-selected their food from an ad libitum vending machine system for 3 days. Mean daily energy intake was calculated from food weight. Energy consumed from soda was recorded as were food choices that were low in fat (<20%) or high in simple sugars (>30%). Food choices were expressed as percentage of daily energy intake. A subset of 85 subjects had measurement of follow-up weights and oral glucose tolerance (57 men, 28 women; mean follow-up time=2.5±2.1 years, range 6 months to 9.9 years). Energy consumed from soda was negatively related to age (r=–0.27, P=0.0001), and choosing low-fat foods (r=−0.35, P<0.0001), but positively associated with choosing solid foods high in simple sugars (r=0.45, P<0.0001) and overall average daily energy intake (r=0.46, P<0.0001). Energy intake from food alone did not differ between individuals who did and did not consume beverage calories (P=0.11). Total daily energy intake had no relationship with change in weight (P=0.29) or change in glucose regulation (P=0.38) over time. However, energy consumed from soda correlated with change in weight (r=0.21, P=0.04). This relationship was unchanged after adjusting for follow-up time and initial weight. Soda consumption is a marker for excess energy consumption and is associated with weight gain. PMID:24321742

Using high frequency consumption data to identify demand response potential for solar energy integration

NASA Astrophysics Data System (ADS)

Jin, L.; Borgeson, S.; Fredman, D.; Hans, L.; Spurlock, A.; Todd, A.

2015-12-01

California's renewable portfolio standard (2012) requires the state to get 33% of its electricity from renewable sources by 2020. Increased share of variable renewable sources such as solar and wind in the California electricity system may require more grid flexibility to insure reliable power services. Such grid flexibility can be potentially provided by changes in end use electricity consumptions in response to grid conditions (demand-response). In the solar case, residential consumption in the late afternoon can be used as reserve capacity to balance the drop in solar generation. This study presents our initial attempt to identify, from a behavior perspective, residential demand response potentials in relation to solar ramp events using a data-driven approach. Based on hourly residential energy consumption data, we derive representative daily load shapes focusing on discretionary consumption with an innovative clustering analysis technique. We aggregate the representative load shapes into behavior groups in terms of the timing and rhythm of energy use in the context of solar ramp events. Households of different behavior groups that are active during hours with high solar ramp rates are identified for capturing demand response potential. Insights into the nature and predictability of response to demand-response programs are provided.

Self-balancing dynamic scheduling of electrical energy for energy-intensive enterprises

NASA Astrophysics Data System (ADS)

Gao, Yunlong; Gao, Feng; Zhai, Qiaozhu; Guan, Xiaohong

2013-06-01

Balancing production and consumption with self-generation capacity in energy-intensive enterprises has huge economic and environmental benefits. However, balancing production and consumption with self-generation capacity is a challenging task since the energy production and consumption must be balanced in real time with the criteria specified by power grid. In this article, a mathematical model for minimising the production cost with exactly realisable energy delivery schedule is formulated. And a dynamic programming (DP)-based self-balancing dynamic scheduling algorithm is developed to obtain the complete solution set for such a multiple optimal solutions problem. For each stage, a set of conditions are established to determine whether a feasible control trajectory exists. The state space under these conditions is partitioned into subsets and each subset is viewed as an aggregate state, the cost-to-go function is then expressed as a function of initial and terminal generation levels of each stage and is proved to be a staircase function with finite steps. This avoids the calculation of the cost-to-go of every state to resolve the issue of dimensionality in DP algorithm. In the backward sweep process of the algorithm, an optimal policy is determined to maximise the realisability of energy delivery schedule across the entire time horizon. And then in the forward sweep process, the feasible region of the optimal policy with the initial and terminal state at each stage is identified. Different feasible control trajectories can be identified based on the region; therefore, optimising for the feasible control trajectory is performed based on the region with economic and reliability objectives taken into account.

Energy efficiency, renewable energy and sustainable development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ervin, C.A.

1994-12-31

The Office of Energy Efficiency and Renewable Energy (EE) is part of the U.S. Department of Energy that is specifically charged with encouraging the more efficient use of energy resources, and the use of renewable energy resources - such as solar power, wind power, biomass energy and geothermal energy. In the past several years, EE has increased its emphasis on technology deployment through partnerships with states, local governments and private companies. Partnerships move new discoveries more quickly into the marketplace, where they can create jobs, prevent pollution, save resources, and produce many other benefits. The author then emphasizes the importancemore » of this effort in a number of different sections of the paper: energy consumption pervades everything we do; U.S. energy imports are rising to record levels; transportation energy demand is increasing; U.S. energy use is increasing; population growth increases world energy demand; total costs of energy consumption aren`t always counted; world energy markets offer incredible potential; cost of renewables is decreasing; clean energy is essential to sustainable development; sustainable energy policy; sustainable energy initiatives: utilities, buildings, and transportation.« less

Energy Metrics for State Government Buildings

NASA Astrophysics Data System (ADS)

Michael, Trevor

Measuring true progress towards energy conservation goals requires the accurate reporting and accounting of energy consumption. An accurate energy metrics framework is also a critical element for verifiable Greenhouse Gas Inventories. Energy conservation in government can reduce expenditures on energy costs leaving more funds available for public services. In addition to monetary savings, conserving energy can help to promote energy security, air quality, and a reduction of carbon footprint. With energy consumption/GHG inventories recently produced at the Federal level, state and local governments are beginning to also produce their own energy metrics systems. In recent years, many states have passed laws and executive orders which require their agencies to reduce energy consumption. In June 2008, SC state government established a law to achieve a 20% energy usage reduction in state buildings by 2020. This study examines case studies from other states who have established similar goals to uncover the methods used to establish an energy metrics system. Direct energy consumption in state government primarily comes from buildings and mobile sources. This study will focus exclusively on measuring energy consumption in state buildings. The case studies reveal that many states including SC are having issues gathering the data needed to accurately measure energy consumption across all state buildings. Common problems found include a lack of enforcement and incentives that encourage state agencies to participate in any reporting system. The case studies are aimed at finding the leverage used to gather the needed data. The various approaches at coercing participation will hopefully reveal methods that SC can use to establish the accurate metrics system needed to measure progress towards its 20% by 2020 energy reduction goal. Among the strongest incentives found in the case studies is the potential for monetary savings through energy efficiency. Framing energy conservation as budget enhancement is found to be a particularly useful approach in political environments that are not always receptive to climate change oriented efforts. For example, the NC Utility Savings Initiative claims to have saved over $400 million in avoided tax costs. The case studies reveal a wide range of individual successes as a result of energy conservation efforts. Despite the successes found, results indicate that most states have not obtained or completely measured progress towards their energy reduction goals.

Assessing Energy Efficiency Opportunities in US Industrial and Commercial Building Motor Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rao, Prakash; Sheaffer, Paul; McKane, Aimee

2015-09-01

In 2002, the United States Department of Energy (USDOE) published an energy efficiency assessment of U.S. industrial sector motor systems titled United States Industrial Electric Motor Systems Market Opportunities Assessment. The assessment advanced motor system efficiency by providing a greater understanding of the energy consumption, use characteristics, and energy efficiency improvement potential of industrial sector motor systems in the U.S. Since 2002, regulations such as Minimum Energy Performance Standards, cost reductions for motor system components such as variable frequency drives, system-integrated motor-driven equipment, and awareness programs for motor system energy efficiency have changed the landscape of U.S. motor system energymore » consumption. To capture the new landscape, the USDOE has initiated a three-year Motor System Market Assessment (MSMA), led by Lawrence Berkeley National Laboratory (LBNL). The MSMA will assess the energy consumption, operational and maintenance characteristics, and efficiency improvement opportunity of U.S. industrial sector and commercial building motor systems. As part of the MSMA, a significant effort is currently underway to conduct field assessments of motor systems from a sample of facilities representative of U.S. commercial and industrial motor system energy consumption. The Field Assessment Plan used for these assessments builds on recent LBNL research presented at EEMODS 2011 and EEMODS 2013 using methods for characterizing and determining regional motor system energy efficiency opportunities. This paper provides an update on the development and progress of the MSMA, focusing on the Field Assessment Plan and the framework for assessing the global supply chain for emerging motors and drive technologies.« less

Using Simple Circuits as Thermal Models for Your Home

ERIC Educational Resources Information Center

Poynor, Adele

2014-01-01

In 2009, President Obama proposed an initiative to decrease our country's energy consumption and dependence on fossil fuels. One key to this plan was to decrease the amount of energy used to heat and cool our homes through government incentives. The EPA estimates that the average American household spends over $1000 annually for heating and…

Alcohol mixed with energy drink: Use may be a consequence of heavy drinking.

PubMed

Rossheim, Matthew E; Thombs, Dennis L; Weiler, Robert M; Barry, Adam E; Suzuki, Sumihiro; Walters, Scott T; Barnett, Tracey E; Paxton, Raheem J; Pealer, Lisa N; Cannell, Brad

2016-06-01

In recent years, studies have indicated that consumers of alcohol mixed with energy drink (AmED) are more likely to drink heavily and experience more negative consequences than consumers who avoid these beverages. Although researchers have identified a number of plausible hypotheses that explain how alcohol-energy drink co-ingestion could cause greater alcohol consumption, there has been no postulation about reverse causal relations. This paper identifies several plausible hypotheses for the observed associations between AmED consumption and greater alcohol consumption, and provides initial evidence for one such hypothesis suggesting that heavy drinking may be a determinant of AmED use. Data collected from 511bar patrons were used to examine the plausibility of one of the proposed hypotheses, i.e., AmED is an artifact of heavy drinking. Associations between the consumption of an assortment of alcoholic beverage types and total alcohol consumption were examined at the event-level, to assess whether AmED is uniquely related with greater alcohol consumption. Increased alcohol consumption was associated with greater odds of consuming most alcoholic beverage types; this association was not unique to AmED. Results support the overlooked hypothesis that AmED use is an artifact of heavy drinking. Thus, AmED consumption may be a consequence or marker of heavier drinking. Much of the existing research on alcoholic beverage types is limited in its ability to implicate any specific type of drink, including AmED, as a cause of increased alcohol consumption and related harm. More rigorous study designs are needed to examine causal relationships. Copyright © 2016 Elsevier Ltd. All rights reserved.

Dynamics of renewable energy consumption and economic activities across the agriculture, industry, and service sectors: evidence in the perspective of sustainable development.

PubMed

Paramati, Sudharshan Reddy; Apergis, Nicholas; Ummalla, Mallesh

2018-01-01

This study aims to examine the impact of renewable and non-renewable energy consumption on the agriculture, industry, services, and overall economic activities (GDP) across a panel of G20 nations. The study makes use of annual data from 1980 to 2012 on 17 countries of the G20. To achieve the study objectives, we apply several robust panel econometric models which account for cross-sectional dependence and heterogeneity in the analysis. The empirical findings confirm the significant long-run equilibrium relationship among the variables. The long-run elasticities indicate that both renewable and non-renewable energy consumptions have significant positive effect on the economic activities across the sectors and also on the overall economic output. These results also imply that the impact is more from renewable energy on economic activities than that of non-renewable energy. Given that, our results offer significant policy implications. We suggest that the policy makers should aim to initiate effective policies to turn domestic and foreign investments into renewable energy projects. This eventually ensures low carbon emissions and sustainable economic development across the G20 nations.

Contribution of wind energy to the energy balance of a combined solar and wind energy system. Part 1: System description, data acquisition and system performance

NASA Astrophysics Data System (ADS)

Ferger, R.; Machens, U.

1985-05-01

A one-family house was equipped with a combined solar and wind energy system plus a night storage heater to measure the seasonal complementary contribution of wind and solar energy to energy demand. Project implementation, problems encountered and modifications to the initial system are described. Meteorological and operational data and house consumption data were recorded on computer-based measuring system. Data on the combined effects of and interdependence between solar collector and wind energy converter are discussed.

Action Potential Energy Efficiency Varies Among Neuron Types in Vertebrates and Invertebrates

PubMed Central

Sengupta, Biswa; Stemmler, Martin; Laughlin, Simon B.; Niven, Jeremy E.

2010-01-01

The initiation and propagation of action potentials (APs) places high demands on the energetic resources of neural tissue. Each AP forces ATP-driven ion pumps to work harder to restore the ionic concentration gradients, thus consuming more energy. Here, we ask whether the ionic currents underlying the AP can be predicted theoretically from the principle of minimum energy consumption. A long-held supposition that APs are energetically wasteful, based on theoretical analysis of the squid giant axon AP, has recently been overturned by studies that measured the currents contributing to the AP in several mammalian neurons. In the single compartment models studied here, AP energy consumption varies greatly among vertebrate and invertebrate neurons, with several mammalian neuron models using close to the capacitive minimum of energy needed. Strikingly, energy consumption can increase by more than ten-fold simply by changing the overlap of the Na+ and K+ currents during the AP without changing the APs shape. As a consequence, the height and width of the AP are poor predictors of energy consumption. In the Hodgkin–Huxley model of the squid axon, optimizing the kinetics or number of Na+ and K+ channels can whittle down the number of ATP molecules needed for each AP by a factor of four. In contrast to the squid AP, the temporal profile of the currents underlying APs of some mammalian neurons are nearly perfectly matched to the optimized properties of ionic conductances so as to minimize the ATP cost. PMID:20617202

Action potential energy efficiency varies among neuron types in vertebrates and invertebrates.

PubMed

Sengupta, Biswa; Stemmler, Martin; Laughlin, Simon B; Niven, Jeremy E

2010-07-01

The initiation and propagation of action potentials (APs) places high demands on the energetic resources of neural tissue. Each AP forces ATP-driven ion pumps to work harder to restore the ionic concentration gradients, thus consuming more energy. Here, we ask whether the ionic currents underlying the AP can be predicted theoretically from the principle of minimum energy consumption. A long-held supposition that APs are energetically wasteful, based on theoretical analysis of the squid giant axon AP, has recently been overturned by studies that measured the currents contributing to the AP in several mammalian neurons. In the single compartment models studied here, AP energy consumption varies greatly among vertebrate and invertebrate neurons, with several mammalian neuron models using close to the capacitive minimum of energy needed. Strikingly, energy consumption can increase by more than ten-fold simply by changing the overlap of the Na(+) and K(+) currents during the AP without changing the APs shape. As a consequence, the height and width of the AP are poor predictors of energy consumption. In the Hodgkin-Huxley model of the squid axon, optimizing the kinetics or number of Na(+) and K(+) channels can whittle down the number of ATP molecules needed for each AP by a factor of four. In contrast to the squid AP, the temporal profile of the currents underlying APs of some mammalian neurons are nearly perfectly matched to the optimized properties of ionic conductances so as to minimize the ATP cost.

78 FR 14717 - Energy Conservation Standards for Set-Top Boxes: Availability of Initial Analysis

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-07

.... Despite the participants' best efforts to negotiate a non- regulatory agreement, these talks ultimately... consumption of baseline products in on and sleep modes of operation by system level components (e.g., tuners...

Establishing a commercial building energy data framework for India

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iyer, Maithili; Kumar, Satish; Mathew, Sangeeta

Buildings account for over 40% of the world’s energy consumption and are therefore a key contributor to a country’s energy as well as carbon budget. Understanding how buildings use energy is critical to understanding how related policies may impact energy use. Data enables decision making, and good quality data arms consumers with the tools to compare their energy performance to their peers, allowing them to differentiate their buildings in the real estate market on the basis of their energy footprint. Good quality data are also essential for policy makers to prioritize their energy saving strategies and track implementation. The Unitedmore » States’ Commercial Building Energy Consumption Survey (CBECS) is an example of a successful data framework that is highly useful for governmental and nongovernmental initiatives related to benchmarking energy forecasting, rating systems and metrics, and more. The Bureau of Energy Efficiency (BEE) in India developed the Energy Conservation Building Code (ECBC) and launched the Star Labeling program for a few energy-intensive building segments as a significant first step. However, a data driven policy framework for systematically targeting energy efficiency in both new construction and existing buildings has largely been missing. There is no quantifiable mechanism currently in place to track the impact of code adoption through regular reporting/survey of energy consumption in the commercial building stock. In this paper we present findings from our study that explored use cases and approaches for establishing a commercial buildings data framework for India.« less

The neural basis of functional neuroimaging signal with positron and single-photon emission tomography.

PubMed

Sestini, S

2007-07-01

Functional imaging techniques such as positron and single-photon emission tomography exploit the relationship between neural activity, energy demand and cerebral blood flow to functionally map the brain. Despite the fact that neurobiological processes are not completely understood, several results have revealed the signals that trigger the metabolic and vascular changes accompanying variations in neural activity. Advances in this field have demonstrated that release of the major excitatory neurotransmitter glutamate initiates diverse signaling processes between neurons, astrocytes and blood perfusion, and that this signaling is crucial for the occurrence of brain imaging signals. Better understanding of the neural sites of energy consumption and the temporal correlation between energy demand, energy consumption and associated cerebrovascular hemodynamics gives novel insight into the potential of these imaging tools in the study of metabolic neurodegenerative disorders.

Life Cycle Water Consumption and Water Resource Assessment for Utility-Scale Geothermal Systems: An In-Depth Analysis of Historical and Forthcoming EGS Projects

DOE Data Explorer

Schroeder, Jenna N.

2013-08-31

This report is the third in a series of reports sponsored by the U.S. Department of Energy Geothermal Technologies Program in which a range of water-related issues surrounding geothermal power production are evaluated. The first report made an initial attempt at quantifying the life cycle fresh water requirements of geothermal power-generating systems and explored operational and environmental concerns related to the geochemical composition of geothermal fluids. The initial analysis of life cycle fresh water consumption of geothermal power-generating systems identified that operational water requirements consumed the vast majority of water across the life cycle. However, it relied upon limited operational water consumption data and did not account for belowground operational losses for enhanced geothermal systems (EGSs). A second report presented an initial assessment of fresh water demand for future growth in utility-scale geothermal power generation. The current analysis builds upon this work to improve life cycle fresh water consumption estimates and incorporates regional water availability into the resource assessment to improve the identification of areas where future growth in geothermal electricity generation may encounter water challenges.

A rapid and low energy consumption method to decolorize the high concentration triphenylmethane dye wastewater: operational parameters optimization for the ultrasonic-assisted ozone oxidation process.

PubMed

Zhou, Xian-Jiao; Guo, Wan-Qian; Yang, Shan-Shan; Ren, Nan-Qi

2012-02-01

This research set up an ultrasonic-assisted ozone oxidation process (UAOOP) to decolorize the triphenylmethane dyes wastewater. Five factors - temperature, initial pH, reaction time, ultrasonic power (low frequency 20 kHz), and ozone concentration - were investigated. Response surface methodology was used to find out the major factors influencing color removal rate and the interactions between these factors, and optimized the operating parameters as well. Under the experimental conditions: reaction temperature 39.81 °C, initial pH 5.29, ultrasonic power 60 W and ozone concentration 0.17 g/L, the highest color removals were achieved with 10 min reaction time and the initial concentration of the MG solution was 1000 mg/L. The optimal results indicated that the UAOOP was a rapid, efficient and low energy consumption technique to decolorize the high concentration MG wastewater. The predicted model was approximately in accordance with the experimental cases with correlation coefficients R(2) and R(adj)(2) of 0.9103 and 0.8386. Crown Copyright © 2011. Published by Elsevier Ltd. All rights reserved.

Research on Characteristics of New Energy Dissipation With Symmetrical Structure

NASA Astrophysics Data System (ADS)

Ming, Wen; Huang, Chun-mei; Huang, Hao-wen; Wang, Xin-fang

2018-03-01

Utilizing good energy consumption capacity of arc steel bar, a new energy dissipation with symmetrical structure was proposed in this article. On the base of collection experimental data of damper specimen Under low cyclic reversed loading, finite element models were built by using ANSYS software, and influences of parameter change (Conduction rod diameter, Actuation plate thickness, Diameter of arc steel rod, Curved bars initial bending) on energy dissipation performance were analyzed. Some useful conclusions which can lay foundations for practical application were drawn.

A grey NGM(1,1, k) self-memory coupling prediction model for energy consumption prediction.

PubMed

Guo, Xiaojun; Liu, Sifeng; Wu, Lifeng; Tang, Lingling

2014-01-01

Energy consumption prediction is an important issue for governments, energy sector investors, and other related corporations. Although there are several prediction techniques, selection of the most appropriate technique is of vital importance. As for the approximate nonhomogeneous exponential data sequence often emerging in the energy system, a novel grey NGM(1,1, k) self-memory coupling prediction model is put forward in order to promote the predictive performance. It achieves organic integration of the self-memory principle of dynamic system and grey NGM(1,1, k) model. The traditional grey model's weakness as being sensitive to initial value can be overcome by the self-memory principle. In this study, total energy, coal, and electricity consumption of China is adopted for demonstration by using the proposed coupling prediction technique. The results show the superiority of NGM(1,1, k) self-memory coupling prediction model when compared with the results from the literature. Its excellent prediction performance lies in that the proposed coupling model can take full advantage of the systematic multitime historical data and catch the stochastic fluctuation tendency. This work also makes a significant contribution to the enrichment of grey prediction theory and the extension of its application span.

Strategies to enhance waste minimization and energy conservation within organizations: a case study from the UK construction sector.

PubMed

Jones, Jo; Jackson, Janet; Tudor, Terry; Bates, Margaret

2012-09-01

Strategies for enhancing environmental management are a key focus for the government in the UK. Using a manufacturing company from the construction sector as a case study, this paper evaluates selected interventionist techniques, including environmental teams, awareness raising and staff training to improve environmental performance. The study employed a range of methods including questionnaire surveys and audits of energy consumption and generation of waste to examine the outcomes of the selected techniques. The results suggest that initially environmental management was not a focus for either the employees or the company. However, as a result of employing the techniques, the company was able to reduce energy consumption, increase recycling rates and achieve costs savings in excess of £132,000.

Residential Central Air Conditioning and Heat Pump Installation – Workshop Outcomes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goetzler, William; Zogg, Robert; Young, Jim

DOE's Building Technologies Office works with researchers and industry partners to develop and deploy technologies that can substantially reduce energy consumption in residential and commercial buildings. This report aims to advance BTO’s energy savings, emissions reduction, and other program goals by identifying research and development (R&D), demonstration and deployment, and other non-regulatory initiatives for improving the design and installation of residential central air conditioners (CAC) and central heat pumps (CHP). Improving the adoption of CAC/CHP design and installation best practices has significant potential to reduce equipment costs, improve indoor air quality and comfort, improve system performance, and most importantly, reducemore » household energy consumption and costs for heating and cooling by addressing a variety of common installation issues.« less

Energy drinks mixed with alcohol: misconceptions, myths, and facts.

PubMed

Verster, Joris C; Aufricht, Christoph; Alford, Chris

2012-01-01

Whilst energy drinks improve performance and feelings of alertness, recent articles suggest that energy drink consumption combined with alcohol may reduce perception of alcohol intoxication, or lead to increased alcohol or drug use. This review discusses the available scientific evidence on the effects of mixing energy drinks with alcohol. A literature search was performed using the keywords "energy drink and Red Bull(®)" and consulting Medline/Pubmed, PsycINFO, and Embase. There is little evidence that energy drinks antagonize the behavioral effects of alcohol, and there is no consistent evidence that energy drinks alter the perceived level of intoxication of people who mix energy drinks with alcohol. No clinically relevant cardiovascular or other adverse effects have been reported for healthy subjects combining energy drinks with alcohol, although there are no long-term investigations currently available. Finally, whilst several surveys have shown associations, there is no direct evidence that coadministration of energy drinks increases alcohol consumption, or initiates drug and alcohol dependence or abuse. Although some reports suggest that energy drinks lead to reduced awareness of intoxication and increased alcohol consumption, a review of the available literature shows that these views are not supported by direct or reliable scientific evidence. A personality with higher levels of risk-taking behavior may be the primary reason for increased alcohol and drug abuse per se. The coconsumption of energy drinks being one of the many expressions of that type of lifestyle and personality.

Energy drinks mixed with alcohol: misconceptions, myths, and facts

PubMed Central

Verster, Joris C; Aufricht, Christoph; Alford, Chris

2012-01-01

Background Whilst energy drinks improve performance and feelings of alertness, recent articles suggest that energy drink consumption combined with alcohol may reduce perception of alcohol intoxication, or lead to increased alcohol or drug use. This review discusses the available scientific evidence on the effects of mixing energy drinks with alcohol. Methods A literature search was performed using the keywords “energy drink and Red Bull®” and consulting Medline/Pubmed, PsycINFO, and Embase. Results There is little evidence that energy drinks antagonize the behavioral effects of alcohol, and there is no consistent evidence that energy drinks alter the perceived level of intoxication of people who mix energy drinks with alcohol. No clinically relevant cardiovascular or other adverse effects have been reported for healthy subjects combining energy drinks with alcohol, although there are no long-term investigations currently available. Finally, whilst several surveys have shown associations, there is no direct evidence that coadministration of energy drinks increases alcohol consumption, or initiates drug and alcohol dependence or abuse. Conclusion Although some reports suggest that energy drinks lead to reduced awareness of intoxication and increased alcohol consumption, a review of the available literature shows that these views are not supported by direct or reliable scientific evidence. A personality with higher levels of risk-taking behavior may be the primary reason for increased alcohol and drug abuse per se. The coconsumption of energy drinks being one of the many expressions of that type of lifestyle and personality. PMID:22399863

Rules and persuasion to save energy: a description of the French connection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1977-02-07

Mr. Syrota discusses the results of France's energy program to save 45 million tons of oil equivalent in 1985 without slowing economic growth or causing undue discomfort. A combination of persuasion and tax incentives will be used to encourage lower consumption. Industry requires stronger regulations, tax incentives (such as taxes on heavy oils), and advertising restrictions. France's per capita energy consumption in 1973 was already the lowest of the industrialized nations. Success of the program's first two years is credited to the efforts of individuals, but now new policy initiatives must be made to encourage investment in energy conservation asmore » opposed to energy production. Reduced imports because of conservation will achieve the same balance of payments advantage as increased exports. Demonstration projects will promote waste heat recovery as a significant area for energy savings. Residential efforts include lowering thermostats, improving insulation and temperature control, and encouraging heat pumps and the use of waste heat. (DCK)« less

A facility monitoring system: The single most valuable and cost-effective tool available to an energy manager

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holmes, W.A.

Energy engineering and management combines engineering problem-solving and financial management techniques to reduce utility costs. At present, substantial amounts of time and money are being spent in order to attempt to quantify energy consumption and costs and define opportunities for savings. Unfortunately, accurate verification of results is often overlooked. Advances in technology during the last few years have made the installation of a permanent, PC-based monitoring system possible for any facility, often for no more than the cost of a detailed study. By investing initially in a monitoring system rather than audits or studies, the actual consumption and cost datamore » will be available on a continuing basis and can be used to produce immediate operational savings, more accurately analyze opportunities requiring capital investments, and to verify actual savings resulting from changes. A permanent monitoring system, installed as the first step in a utility cost reduction effort, to identify where and how energy is used in a facility on a dynamic and real-time basis, can provide the most valuable and cost-effective tool available to an energy manager. The resulting data allows energy consumption patterns and utility costs to be understood and managed in the same manner as all other costs within a facility.« less

Market assessment in connection with lighter than air

NASA Technical Reports Server (NTRS)

Wood, J. E. R.

1975-01-01

A review of the marketability of the airship is given, and the relative energy consumption and speed potential of the airship is compared to other modes and guidelines to areas of initial development are also provided, together with a brief historical review.

Current energy usage and sustainable energy in Kazakhstan: A review

NASA Astrophysics Data System (ADS)

Karatayev, Marat; Islam, Tofazzal; Salnikov, Vitaliy

2014-05-01

Kazakhstan has abundant natural resources. The country has enough coal to supply its energy needs for the next 150 years, and has the world's largest deposits of uranium, substantial quantities of natural gas and petroleum deposits. However, despite such energy riches, due to the size of the territory, its geography, and the country's economic structure, distribution of electricity in Kazakhstan is not uniform. As a result, Kazakhstani rural and remote areas suffer from serious electricity deficits. According to the latest estimates from the Ministry of Industry and New Technologies, about 25-30% of the Kazakhstani population lives in rural communities, where access to affordable energy (for heating, cooling, cooking, refrigeration, lighting, household as well as IT use) is limited. Furthermore, with the main electricity production infrastructure concentrated in the main urban areas, a high amount of electricity is therefore lost during transmission. Moreover, the consumption of poor quality coal as the main source of power generation creates a significant amount of environmental pollution. To illustrate this development, fuel combustion from coal has produced around 75% of carbon dioxide emissions in Kazakhstan. Thus, in order to address the country's electricity and environmental challenges, the Kazakhstani government is taking initiatives to promote renewable energy resources. However, so far, the outcome of these initiatives remains negligible. The current contribution of renewable energy to the total energy consumption is less than 1% (with 90% provided by hydropower) despite the significant potential for renewable energy in the country. As yet, no comprehensive study has been published on the energy scenario and on the potential for renewable energy resources in Kazakhstan. This comprehensive review aims to present an overview of the country's energy resources, supply and demand as the current energy scenario, while discussing the potential for renewable energy resources such as wind, solar, small hydro and biomass as alternative energy supplies in this country. Our analysis shows that wind and solar energy can become major contributors towards renewable energy in Kazakhstan. The biomass of agricultural residues, municipal solid waste and wood residues could be used for energy purposes too. Therefore, Kazakhstan should optimize energy consumption and take active and effective measures to increase the contribution of renewables in energy supply to make the country's energy mix environmentally sustainable.

Acetobacter pasteurianus metabolic change induced by initial acetic acid to adapt to acetic acid fermentation conditions.

PubMed

Zheng, Yu; Zhang, Renkuan; Yin, Haisong; Bai, Xiaolei; Chang, Yangang; Xia, Menglei; Wang, Min

2017-09-01

Initial acetic acid can improve the ethanol oxidation rate of acetic acid bacteria for acetic acid fermentation. In this work, Acetobacter pasteurianus was cultured in ethanol-free medium, and energy production was found to increase by 150% through glucose consumption induced by initial acetic acid. However, oxidation of ethanol, instead of glucose, became the main energy production pathway when upon culturing ethanol containing medium. Proteome assay was used to analyze the metabolism change induced by initial acetic acid, which provided insight into carbon metabolic and energy regulation of A. pasteurianus to adapt to acetic acid fermentation conditions. Results were further confirmed by quantitative real-time PCR. In summary, decreased intracellular ATP as a result of initial acetic acid inhibition improved the energy metabolism to produce more energy and thus adapt to the acetic acid fermentation conditions. A. pasteurianus upregulated the expression of enzymes related to TCA and ethanol oxidation to improve the energy metabolism pathway upon the addition of initial acetic acid. However, enzymes involved in the pentose phosphate pathway, the main pathway of glucose metabolism, were downregulated to induce a change in carbon metabolism. Additionally, the enhancement of alcohol dehydrogenase expression promoted ethanol oxidation and strengthened the acetification rate, thereby producing a strong proton motive force that was necessary for energy production and cell tolerance to acetic acid.

Techno-economical Analysis of Rooftop Grid-connected PV Dairy Farms; Case Study of Urmia University Dairy Farm

NASA Astrophysics Data System (ADS)

Nikbakht, A. M.; Aste, N.; Sarnavi, H. J.; Leonforte, F.

2017-08-01

The global trends indicate a growing commitment to renewable energy development because of declining fossil fuels and environmental threats. Moreover, the global demographic growth coupled with rising demands for food has escalated the rate of energy consumption in food section. This study aims to investigate the techno-economic impacts of a grid-connected rooftop PV plan applied for a educational dairy farm in Urmia university, with total estimated annual electrical energy consumption of 18,283 kWh, located at the north west part of Iran. Based on the current feed-in tariff and tremendously low electricity price in agriculture section in Iran, the plants with size ranged from 14.4 to 19.7 kWp (initial investment ranged from 26,000 to 36,000 USD) would be satisfied economically.

Catalytic Deoxygenation of Biomass Pyrolysis Vapors to Improve Bio-oil Stability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dayton, David C.

2016-12-22

The President’s Advanced Energy Initiative called for a change in the way Americans fuel their vehicles to promote improved energy security. Increasing biofuels production from domestic lignocellulosic resources requires advanced technology development to achieve the aggressive targets set forth to reduce motor gasoline consumption by 20% in ten years (by 2017). The U.S. Department of Energy (USDOE) Office of the Biomass Program (currently Bioenergy Technologies Office) is actively funding research and development in both biochemical and thermochemical conversion technologies to accelerate the deployment of biofuels technologies in the near future to meet the goals of the Advanced Energy Initiative. Thermochemicalmore » conversion technology options include both gasification and pyrolysis to enable the developing lignocellulosic biorefineries and maximize biomass resource utilization for production of biofuels.« less

Roles of water molecules in bacteria and viruses

NASA Astrophysics Data System (ADS)

Cox, C. S.

1993-02-01

In addition to water, microbes mainly comprise lipids, carbohydrates, proteins and nucleic acids. Their structure and function singularly and conjointly is affected by water activity. Desiccation leads to dramatic lipid phase changes whereas carbohydrates, proteins and nucleic acids initially suffer spontaneous, reversible low activation energy Maillard reactions forming products that more slowly re-arrange, cross-link etc. to give non-native states. While initial products spontaneously may reverse to native states by raising water activity, later products only do so through energy consumption and enzymatic activity eg. repair. Yet, native states of lipid membranes and associated enzymes are required to generate energy. Consequently, good reserves of high energy compounds (e.g. ATP) and of membrane stabilisers (e.g. trehalose) may be expected to enhance survival following drying and rehydration (e.g. anhydrobiotic organisms).

Citizen's actions

NASA Technical Reports Server (NTRS)

1975-01-01

The various ways in which energy may be conserved by individual citizens as consumers were explored. The following barriers against citizens implementing an effective conservation program were described: credibility gap between producers and consumers, consumptive lifestyles, inverted rate structure, low fuel costs, and initial costs compared to life cycle costs. The following indices for saving energy were identified: time to develop alternatives, scarcity of fuels, reduction of dependence on imports, and decreasing environmental pollution. The various approaches to encourage energy conservation by individuals were described, followed by specific conclusions and recommendations.

A Grey NGM(1,1, k) Self-Memory Coupling Prediction Model for Energy Consumption Prediction

PubMed Central

Guo, Xiaojun; Liu, Sifeng; Wu, Lifeng; Tang, Lingling

2014-01-01

Energy consumption prediction is an important issue for governments, energy sector investors, and other related corporations. Although there are several prediction techniques, selection of the most appropriate technique is of vital importance. As for the approximate nonhomogeneous exponential data sequence often emerging in the energy system, a novel grey NGM(1,1, k) self-memory coupling prediction model is put forward in order to promote the predictive performance. It achieves organic integration of the self-memory principle of dynamic system and grey NGM(1,1, k) model. The traditional grey model's weakness as being sensitive to initial value can be overcome by the self-memory principle. In this study, total energy, coal, and electricity consumption of China is adopted for demonstration by using the proposed coupling prediction technique. The results show the superiority of NGM(1,1, k) self-memory coupling prediction model when compared with the results from the literature. Its excellent prediction performance lies in that the proposed coupling model can take full advantage of the systematic multitime historical data and catch the stochastic fluctuation tendency. This work also makes a significant contribution to the enrichment of grey prediction theory and the extension of its application span. PMID:25054174

Treatment of industrial estate wastewater by the application of electrocoagulation process using iron electrodes.

PubMed

Yavuz, Y; Ögütveren, Ü B

2018-02-01

In this study electrocoagulation (EC) of industrial estate wastewater taken from the inlet of wastewater treatment plant was investigated using sacrificial iron electrodes. Employing a pole changer to homogenous consumption of electrodes, studies on the parameters such as current density, supporting electrolyte concentration and initial pH, which have significant effects on COD removal and hence the energy consumption, were performed. Hydrogen peroxide was used in different concentrations to observe its effects on COD removal efficiency and the energy consumption. Sludge productions were also calculated for all experiments. COD removal efficiency of ∼92% was obtained at the best experimental conditions (i = 30 mA/cm 2 , SE = 3 mM Na 2 SO 4 , pH = original pH (∼6) of the wastewater, 1500 mg/L H 2 O 2 ) with an energy cost of €3.41/m 3 wastewater treated and the sludge production of 5.45 g per g COD removed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Optimal design of a magnetorheological damper used in smart prosthetic knees

NASA Astrophysics Data System (ADS)

Gao, Fei; Liu, Yan-Nan; Liao, Wei-Hsin

2017-03-01

In this paper, a magnetorheological (MR) damper is optimally designed for use in smart prosthetic knees. The objective of optimization is to minimize the total energy consumption during one gait cycle and weight of the MR damper. Firstly, a smart prosthetic knee employing a DC motor, MR damper and springs is developed based on the kinetics characteristics of human knee during walking. Then the function of the MR damper is analyzed. In the initial stance phase and swing phase, the MR damper is powered off (off-state). While during the late stance phase, the MR damper is powered on to work as a clutch (on-state). Based on the MR damper model as well as the prosthetic knee model, the instantaneous energy consumption of the MR damper is derived in the two working states. Then by integrating in one gait cycle, the total energy consumption is obtained. Particle swarm optimization algorithm is used to optimize the geometric dimensions of MR damper. Finally, a prototype of the optimized MR damper is fabricated and tested with comparison to simulation.

Removal of aluminum from drinking water treatment sludge using vacuum electrokinetic technology.

PubMed

Xu, Hang; Ding, Mingmei; Shen, Kunlun; Cui, Jianfeng; Chen, Wei

2017-04-01

A vacuum electrokinetic apparatus was operated at a municipal water supply plant in Wuxi, China to study the removal of aluminum from the plant's drinking water treatment sludge, high in trivalent aluminum content. The effect of several experimental variables (initial pH, potential gradient, and zone in the sludge tank) and the trivalent aluminum removal mechanism were analyzed. The speciation of trivalent aluminum mainly depends on the initial pH of drinking water treatment sludge, and more fractions of trivalent aluminum were migrated at pH 4 than at higher or lower pH. The application of high voltage can enhance the removal efficiency of aluminum. A three-dimensional electric field analysis explained the difference in the removal efficiency at different zones in the sludge tank. In view of energy consumption, when the initial pH was 4 and a potential gradient of 2 V cm -1 was applied, achieving a final aluminum concentration of 30 g kg -1 after 120 h. The specific energy consumption was 11.7 kWh kg -1 of Al removed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Three Essays In and Tests of Theoretical Urban Economics

NASA Astrophysics Data System (ADS)

Zhao, Weihua

This dissertation consists of three essays on urban economics. The three essays are related to urban spatial structure change, energy consumption, greenhouse gas emissions, and housing redevelopment. Chapter 1 answers the question: Does the classic Standard Urban Model still describe the growth of cities? Chapter 2 derives the implications of telework on urban spatial structure, energy consumption, and greenhouse gas emissions. Chapter 3 investigates the long run effects of minimum lot size zoning on neighborhood redevelopment. Chapter 1 identifies a new implication of the classic Standard Urban Model, the "unitary elasticity property (UEP)", which is the sum of the elasticity of central density and the elasticity of land area with respect to population change is approximately equal to unity. When this implication of the SUM is tested, it fits US cities fairly well. Further analysis demonstrates that topographic barriers and age of housing stock are the key factors explaining deviation from the UEP. Chapter 2 develops a numerical urban simulation model with households that are able to telework to investigate the urban form, congestion, energy consumption and greenhouse gas emission implications of telework. Simulation results suggest that by reducing transportation costs, telework causes sprawl, with associated longer commutes and consumption of larger homes, both of which increase energy consumption. Overall effects depend on who captures the gains from telework (workers versus firms), urban land use regulation such as height limits or greenbelts, and the fraction of workers participating in telework. The net effects of telework on energy use and GHG emissions are generally negligible. Chapter 3 applies dynamic programming to investigate the long run effects of minimum lot size zoning on neighborhood redevelopment. With numerical simulation, comparative dynamic results show that minimum lot size zoning can delay initial land conversion and slow down demolition and housing redevelopment. Initially, minimum lot size zoning is not binding. However, as city grows, it becomes binding and can effectively distort housing supply. It can lower both floor area ratio and residential density, and reduce aggregate housing supply. Overall, minimum lot size zoning can stabilize the path of structure/land ratios, housing service levels, structure density, and housing prices. In addition, minimum lot size zoning provides more incentive for developer to maintain the building, slow structure deterioration, and raise the minimum level of housing services provided over the life cycle of development.

Climate Impacts on Extreme Energy Consumption of Different Types of Buildings

PubMed Central

Li, Mingcai; Shi, Jun; Guo, Jun; Cao, Jingfu; Niu, Jide; Xiong, Mingming

2015-01-01

Exploring changes of building energy consumption and its relationships with climate can provide basis for energy-saving and carbon emission reduction. Heating and cooling energy consumption of different types of buildings during 1981-2010 in Tianjin city, was simulated by using TRNSYS software. Daily or hourly extreme energy consumption was determined by percentile methods, and the climate impact on extreme energy consumption was analyzed. The results showed that days of extreme heating consumption showed apparent decrease during the recent 30 years for residential and large venue buildings, whereas days of extreme cooling consumption increased in large venue building. No significant variations were found for the days of extreme energy consumption for commercial building, although a decreasing trend in extreme heating energy consumption. Daily extreme energy consumption for large venue building had no relationship with climate parameters, whereas extreme energy consumption for commercial and residential buildings was related to various climate parameters. Further multiple regression analysis suggested heating energy consumption for commercial building was affected by maximum temperature, dry bulb temperature, solar radiation and minimum temperature, which together can explain 71.5 % of the variation of the daily extreme heating energy consumption. The daily extreme cooling energy consumption for commercial building was only related to the wet bulb temperature (R2= 0.382). The daily extreme heating energy consumption for residential building was affected by 4 climate parameters, but the dry bulb temperature had the main impact. The impacts of climate on hourly extreme heating energy consumption has a 1-3 hour delay in all three types of buildings, but no delay was found in the impacts of climate on hourly extreme cooling energy consumption for the selected buildings. PMID:25923205

Climate impacts on extreme energy consumption of different types of buildings.

PubMed

Li, Mingcai; Shi, Jun; Guo, Jun; Cao, Jingfu; Niu, Jide; Xiong, Mingming

2015-01-01

Exploring changes of building energy consumption and its relationships with climate can provide basis for energy-saving and carbon emission reduction. Heating and cooling energy consumption of different types of buildings during 1981-2010 in Tianjin city, was simulated by using TRNSYS software. Daily or hourly extreme energy consumption was determined by percentile methods, and the climate impact on extreme energy consumption was analyzed. The results showed that days of extreme heating consumption showed apparent decrease during the recent 30 years for residential and large venue buildings, whereas days of extreme cooling consumption increased in large venue building. No significant variations were found for the days of extreme energy consumption for commercial building, although a decreasing trend in extreme heating energy consumption. Daily extreme energy consumption for large venue building had no relationship with climate parameters, whereas extreme energy consumption for commercial and residential buildings was related to various climate parameters. Further multiple regression analysis suggested heating energy consumption for commercial building was affected by maximum temperature, dry bulb temperature, solar radiation and minimum temperature, which together can explain 71.5 % of the variation of the daily extreme heating energy consumption. The daily extreme cooling energy consumption for commercial building was only related to the wet bulb temperature (R2= 0.382). The daily extreme heating energy consumption for residential building was affected by 4 climate parameters, but the dry bulb temperature had the main impact. The impacts of climate on hourly extreme heating energy consumption has a 1-3 hour delay in all three types of buildings, but no delay was found in the impacts of climate on hourly extreme cooling energy consumption for the selected buildings.

The association of whole grain consumption with incident type 2 diabetes: the Women's Health Initiative Observational Study.

PubMed

Parker, Emily D; Liu, Simin; Van Horn, Linda; Tinker, Leslie F; Shikany, James M; Eaton, Charles B; Margolis, Karen L

2013-06-01

Whole grains may offer protection from diabetes by decreasing energy intake, preventing weight gain, and direct effects on insulin resistance. This study examined associations of whole and refined grains with incident type 2 diabetes (T2D) ascertained by self-reported medication use in a cohort of postmenopausal women. We included 72,215 women free of diabetes at baseline from the Women's Health Initiative Observational Study. Whole grain consumption was categorized as 0, less than 0.5, 0.5 to 1.0, 1.0 to less than 1.5, 1.5 to less than 2.0, and 2.0 or more servings per day. Proportional hazards regression was performed to estimate hazard ratios (HR) and 95% confidence intervals adjusting for potential confounders. There were 3465 cases of incident T2D over median follow-up of 7.9 years. Adjusted for age and energy intake per day, successively increasing categories of whole grain consumption were associated with statistically significant reduced risk of incident T2D (HRs, 1.00, 0.83, 0.73, 0.69, 0.61, and 0.57; P for trend < 0.0001). Results were attenuated after adjustment for confounders and other dietary components. The reduction in risk of T2D was greater among nonsmokers and those who maintained their weight within 5 pounds with higher consumption of whole grains than smokers and women who gained more weight. This large, prospective study found an inverse dose-response relationship between whole grain consumption and incident T2D in postmenopausal women. Copyright © 2013 Elsevier Inc. All rights reserved.

[Optimizing carbon/energy metabolism to enhance monellin production by Pichia pastoris].

PubMed

Huai, Qiangqiang; Jia, Luqiang; Ding, Jian; Chen, Shanshan; Sun, Jiaowen; Shi, Zhongping

2018-02-25

In heterologous protein productions by Pichia pastoris, methanol induction is generally initiated when cell density reaches very high level. However, this traditional strategy suffers with the problems of difficulty in DO control, toxic by-metabolites accumulation and low targeted protein titer. Therefore, initiating methanol induction at lower cell concentration is considered as an alternative strategy to overcome those problems. However, the methanol/energy regulation mechanisms of initiating induction at lower concentration are not clear and seldom reported. In this article, with monellin production as a prototype, we analyzed the methanol/energy metabolism in protein expression process using the strategies of initiating induction at both higher/lower cells concentrations. We attempted to interpret the advantages of the "alternative" strategy, via online measurements of methanol consumption, CO₂ production and O₂ uptake rates. When adopting this "alternative" strategy and maintaining temperature at 30 °C, carbon flux ratio directing into monellin precursors synthesis reached the highest level of 65%. In addition, monellin synthesis was completely associated with cell growth.

DUV light source sustainability achievements and next steps

NASA Astrophysics Data System (ADS)

Roman, Yzzer; Cacouris, Ted; Raju, Kumar Raja Guvindan; Kanawade, Dinesh; Gillespie, Walt; Luo, Siqi; Mason, Eric; Manley, David; Das, Saptaparna

2018-03-01

Key sustainability opportunities have been executed in support of corporate initiatives to reduce the environmental footprint and decrease the running cost of DUV light sources. Previously, substantial neon savings were demonstrated over several years through optimized gas management technologies. Beyond this work, Cymer is developing the XLGR 100, a self-contained neon recycling system, to enable minimal gas consumption. The high efficiency results of the XLGR 100 in a production factory are validated in this paper. Cymer has also developed new light source modules with 33% longer life in an effort to reduce raw and associated resource consumption. In addition, a progress report is included regarding the improvements developed to reduce light source energy consumption.

Energy Efficiency and Sustainability of Different Building Structures in Latvian Climate

NASA Astrophysics Data System (ADS)

Jakovičs, A.; Gendelis, S.; Bandeniece, L.

2015-11-01

Five experimental test buildings have been built in Riga, Latvia. They are identical except external walls for which different mainly regional building materials are used. Calculated U-values of the other walls, floor and ceiling are the same for each test building. Initial moisture influences the relative humidity of indoor air, which can be higher in the initial time period; as a result, heat transmittances are also very different and cause different heating/cooling energy consumption. Overheating risk in summer exists for test buildings with the smallest thermal inertia. Both summer and heating seasons have been analysed and differences between five test houses have been discussed in details.

State and location dependence of action potential metabolic cost in cortical pyramidal neurons.

PubMed

Hallermann, Stefan; de Kock, Christiaan P J; Stuart, Greg J; Kole, Maarten H P

2012-06-03

Action potential generation and conduction requires large quantities of energy to restore Na(+) and K(+) ion gradients. We investigated the subcellular location and voltage dependence of this metabolic cost in rat neocortical pyramidal neurons. Using Na(+)/K(+) charge overlap as a measure of action potential energy efficiency, we found that action potential initiation in the axon initial segment (AIS) and forward propagation into the axon were energetically inefficient, depending on the resting membrane potential. In contrast, action potential backpropagation into dendrites was efficient. Computer simulations predicted that, although the AIS and nodes of Ranvier had the highest metabolic cost per membrane area, action potential backpropagation into the dendrites and forward propagation into axon collaterals dominated energy consumption in cortical pyramidal neurons. Finally, we found that the high metabolic cost of action potential initiation and propagation down the axon is a trade-off between energy minimization and maximization of the conduction reliability of high-frequency action potentials.

[Analysis of grey correlation between energy consumption and economic growth in Liaoning Province, China.

PubMed

Wang, Li; Xi, Feng Ming; Wang, Jiao Yue

2016-03-01

The contradiction between energy consumption and economic growth is increasingly prominent in China. Liaoning Province as one of Chinese heavy industrial bases, consumes a large amount of energy. Its economic development has a strong dependence on energy consumption, but the energy in short supply become more apparent. In order to further understand the relationship between energy consumption and economic growth and put forward scientific suggestions on low carbon development, we used the grey correlation analysis method to separately examine the relevance of economic growth with energy consumption industries and energy consumption varieties through analy sis of energy consumption and economic growth data in Liaoning Province from 2000 to 2012. The results showed that the wholesale and retail sector and hotel and restaurant sector were in the minimum energy consumption in all kinds of sectors, but they presented the closest connection with the economic growth. Although industry energy consumption was the maximum, the degree of connection between industry energy consumption and economic growth was weak. In all types of energy consumption, oil and hydro-power consumption had a significant connection with economic growth. However, the degree of connection of coal consumption with economic growth was not significant, which meant that coal utilization efficiency was low. In order to achieve low carbon and sustainable development, Liaoning Province should transform the economic growth mode, adjust industry structure, optimize energy structure, and improve energy utilization efficiency, especially promote producer services and develop clean and renewable energy.

Energy saving and consumption reducing evaluation of thermal power plant

NASA Astrophysics Data System (ADS)

Tan, Xiu; Han, Miaomiao

2018-03-01

At present, energy saving and consumption reduction require energy saving and consumption reduction measures for thermal power plant, establishing an evaluation system for energy conservation and consumption reduction is instructive for the whole energy saving work of thermal power plant. By analysing the existing evaluation system of energy conservation and consumption reduction, this paper points out that in addition to the technical indicators of power plant, market activities should also be introduced in the evaluation of energy saving and consumption reduction in power plant. Ttherefore, a new evaluation index of energy saving and consumption reduction is set up and the example power plant is calculated in this paper. Rresults show that after introducing the new evaluation index of energy saving and consumption reduction, the energy saving effect of the power plant can be judged more comprehensively, so as to better guide the work of energy saving and consumption reduction in power plant.

Jet transport energy management for minimum fuel consumption and noise impact in the terminal area

NASA Technical Reports Server (NTRS)

Bull, J. S.; Foster, J. D.

1974-01-01

Significant reductions in both noise and fuel consumption can be gained through careful tailoring of approach flightpath and airspeed profile, and the point at which the landing gear and flaps are lowered. For example, the noise problem has been successfully attacked in recent years with development of the 'two-segment' approach, which brings the aircraft in at a steeper angle initially, thereby achieving noise reduction through lower thrust settings and higher altitudes. A further reduction in noise and a significant reduction in fuel consumption can be achieved with the 'decelerating approach' concept. In this case, the approach is initiated at high airspeed and in a drag configuration that allows for low thrust. The landing flaps are then lowered at the appropriate time so that the airspeed slowly decelerates to V sub r at touchdown. The decelerating approach concept can be applied to constant glideslope flightpaths or segmented flightpaths such as the two-segment approach.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, A.; Repac, B.; Gonder, J.

This poster presents initial estimates of the net energy impacts of automated vehicles (AVs). Automated vehicle technologies are increasingly recognized as having potential to decrease carbon dioxide emissions and petroleum consumption through mechanisms such as improved efficiency, better routing, lower traffic congestion, and by enabling advanced technologies. However, some effects of AVs could conceivably increase fuel consumption through possible effects such as longer distances traveled, increased use of transportation by underserved groups, and increased travel speeds. The net effect on petroleum use and climate change is still uncertain. To make an aggregate system estimate, we first collect best estimates formore » the energy impacts of approximately ten effects of AVs. We then use a modified Kaya Identity approach to estimate the range of aggregate effects and avoid double counting. We find that depending on numerous factors, there is a wide range of potential energy impacts. Adoption of automated personal or shared vehicles can lead to significant fuel savings but has potential for backfire.« less

The relative validity of a retrospective estimate of food consumption based on a current dietary history and a food frequency list.

PubMed

Bakkum, A; Bloemberg, B; van Staveren, W A; Verschuren, M; West, C E

1988-01-01

The relative validity of information and food consumption in the distant past was assessed by combining a dietary history (referring to the recent past) with a food frequency list (monitoring major changes over the past 12-14 years). This approach was evaluated in a study of two groups of apparently healthy elderly people (mean age 80 years) who had participated in a food consumption study 12-14 years before the start of the present study. One group consisted of 18 harbor employees who retired subsequent to the initial assessment of food intake. On the average, each member of this group had reduced his food consumption by about 1,000 kcal. The other group consisted of 46 elderly men and women who had retired before their food consumption was measured initially. This group had not markedly changed their food intake. The results showed that both groups overestimated changes in their food intake and that the systematic overestimation and random error were similar for both groups. If the men in both groups were combined to form one group, a valid ranking of subjects in small and large consumers of energy and most of the selected nutrients was possible. However, current food intake influenced the accuracy of the measurement of past food intake.

DCE: A Distributed Energy-Efficient Clustering Protocol for Wireless Sensor Network Based on Double-Phase Cluster-Head Election.

PubMed

Han, Ruisong; Yang, Wei; Wang, Yipeng; You, Kaiming

2017-05-01

Clustering is an effective technique used to reduce energy consumption and extend the lifetime of wireless sensor network (WSN). The characteristic of energy heterogeneity of WSNs should be considered when designing clustering protocols. We propose and evaluate a novel distributed energy-efficient clustering protocol called DCE for heterogeneous wireless sensor networks, based on a Double-phase Cluster-head Election scheme. In DCE, the procedure of cluster head election is divided into two phases. In the first phase, tentative cluster heads are elected with the probabilities which are decided by the relative levels of initial and residual energy. Then, in the second phase, the tentative cluster heads are replaced by their cluster members to form the final set of cluster heads if any member in their cluster has more residual energy. Employing two phases for cluster-head election ensures that the nodes with more energy have a higher chance to be cluster heads. Energy consumption is well-distributed in the proposed protocol, and the simulation results show that DCE achieves longer stability periods than other typical clustering protocols in heterogeneous scenarios.

The Effect of a Tectonic Stress Field on Coal and Gas Outbursts

PubMed Central

An, Fenghua; Cheng, Yuanping

2014-01-01

Coal and gas outbursts have always been a serious threat to the safe and efficient mining of coal resources. Ground stress (especially the tectonic stress) has a notable effect on the occurrence and distribution of outbursts in the field practice. A numerical model considering the effect of coal gas was established to analyze the outburst danger from the perspective of stress conditions. To evaluate the outburst tendency, the potential energy of yielded coal mass accumulated during an outburst initiation was studied. The results showed that the gas pressure and the strength reduction from the adsorbed gas aggravated the coal mass failure and the ground stress altered by tectonics would affect the plastic zone distribution. To demonstrate the outburst tendency, the ratio of potential energy for the outburst initiation and the energy consumption was used. Increase of coal gas and tectonic stress could enhance the potential energy accumulation ratio, meaning larger outburst tendency. The component of potential energy for outburst initiation indicated that the proportion of elastic energy was increased due to tectonic stress. The elastic energy increase is deduced as the cause for a greater outburst danger in a tectonic area from the perspective of stress conditions. PMID:24991648

Randomized Controlled Trial of High-Volume Energy Drink Versus Caffeine Consumption on ECG and Hemodynamic Parameters.

PubMed

Fletcher, Emily A; Lacey, Carolyn S; Aaron, Melenie; Kolasa, Mark; Occiano, Andrew; Shah, Sachin A

2017-04-26

Caffeine in doses <400 mg is typically not considered arrhythmogenic, but little is known about the additional ingredients in energy drinks. We evaluated the ECG and blood pressure (BP) effects of high-volume energy drink consumption compared with caffeine alone. This was a randomized, double-blind, controlled, crossover study in 18 young, healthy volunteers. Participants consumed either 946 mL (32 ounces) of energy drink or caffeinated control drink, both of which contained 320 mg of caffeine, separated by a 6-day washout period. ECG, peripheral BP, and central BP measurements were obtained at baseline and 1, 2, 4, 6, and 24 hours post study drink consumption. The time-matched, baseline-adjusted changes were compared. The change in corrected QT interval from baseline in the energy drink arm was significantly higher than the caffeine arm at 2 hours (0.44±18.4 ms versus -10.4±14.8 ms, respectively; P =0.02). The QTc changes were not different at other time points. While both the energy drink and caffeine arms raised systolic BP in a similar fashion initially, the systolic BP was significantly higher at 6 hours when compared with the caffeine arm (4.72±4.67 mm Hg versus 0.83±6.09 mm Hg, respectively; P =0.01). Heart rate, diastolic BP, central systolic BP, and central diastolic BP showed no evidence of a difference between groups at any time point. Post energy drink, augmentation index was lower at 6 hours. The corrected QT interval and systolic BP were significantly higher post high-volume energy drink consumption when compared with caffeine alone. Larger clinical trials validating these findings and evaluation of noncaffeine ingredients within energy drinks are warranted. URL: http://www.clinicaltrials.gov. Unique identifier: NCT02023723. © 2017 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley.

Evaluation of energy efficient design competition of a public office building in North Greece

NASA Astrophysics Data System (ADS)

Chatzimanoli, Asimina

Over the past few years in Greece there have been changes in the National Environmental and Energy Policy related to sustainability and energy conservation-saving, concerning the built environment as well. In this context, in 1999, the Hellenic Public Real Estate Corporation announced a Public Open Competition for the "Design and Construction" of a Police Station in the city of Kilkis, in North Greece. The energy efficiency and bioclimatic design was part of the General Design Principles of the brief. The following Report aims at evaluating the energy performance of the building and the comfort levels in the internal environment and determining the benefits of incorporating environmental design in a Public Office Building, in terms of savings in the energy consumption for heating. The Methodology included a description of the features of the design, analysis of the differences between the initial design and the constructed building, investigation of the operation of the constructed building (monitoring, questionnaire survey, energy consumption) and evaluation of the effect of the differences mentioned, using computer simulation (TAS software). Internal Temperatures fluctuated less than the external but for most of the monitoring period (end of mid-season-beginning of summer) Maximum Temperatures were higher than the external. The occupants gave positive comments and evaluated the general working conditions in the building as good, but the majority were not aware of the Passive Solar Systems installed in the building. The actual energy consumption for heating (150.85kWh/m2) is approximately 85% of the average consumption of Public Office Buildings in North Greece but 50% higher than that of recently built Public Office Buildings. However, the figure from the simulation analysis (corresponding to Office and Common spaces) is approximately 1/3 of the actual (55.14 kWh/m2), suggesting that proper operation of the building could result in significant reduction in energy required for heating.

Thermal and mechanical stabilization process of the organic fraction of the municipal solid waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Giudicianni, Paola, E-mail: giudicianni@irc.cnr.it; Bozza, Pio, E-mail: pi.bozza@studenti.unina.it; Sorrentino, Giancarlo, E-mail: g.sorrentino@unina.it

2015-10-15

Graphical abstract: Display Omitted - Highlights: • A domestic scale prototype for the pre-treatment of OFMSW has been tested. • Two grinding techniques are compared and thermopress is used for the drying stage. • Increasing temperature up to 170 °C reduces energy consumption of the drying stage. • In the range 5–10 bar a reduction of 97% of the initial volume is obtained. • In most cases energy recovery from the dried waste matches energy consumption. - Abstract: In the present study a thermo-mechanical treatment for the disposal of the Organic Fraction of Municipal Solid Waste (OFMSW) at apartment ormore » condominium scale is proposed. The process presents several advantages allowing to perform a significant volume and moisture reduction of the produced waste at domestic scale thus producing a material with an increased storability and improved characteristics (e.g. calorific value) that make it available for further alternative uses. The assessment of the applicability of the proposed waste pretreatment in a new scheme of waste management system requires several research steps involving different competences and application scales. In this context, a preliminary study is needed targeting to the evaluation and minimization of the energy consumption associated to the process. To this aim, in the present paper, two configurations of a domestic appliance prototype have been presented and the effect of some operating variables has been investigated in order to select the proper configuration and the best set of operating conditions capable to minimize the duration and the energy consumption of the process. The performances of the prototype have been also tested on three model mixtures representing a possible daily domestic waste and compared with an existing commercially available appliance. The results obtained show that a daily application of the process is feasible given the short treatment time required and the energy consumption comparable to the one of the common domestic appliances. Finally, the evaluation of the energy recovered in the final product per unit weight of raw material shows that in most cases it is comparable to the energy required from the treatment.« less

Using Field-Metered Data to Quantify Annual Energy Use of Portable Air Conditioners

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burke, Thomas; Willem, Henry; Ni, Chun Chun

2014-12-01

As many regions of the United States experience rising temperatures, consumers have come to rely increasingly on cooling appliances (including portable air conditioners) to provide a comfortable indoor temperature. Home occupants sometimes use a portable air conditioner (PAC) to maintain a desired indoor temperature in a single room or enclosed space. Although PACs in residential use are few compared to centrally installed and room air conditioning (AC) units, the past few years have witnessed an increase of PACs use throughout the United States. There is, however, little information and few research projects focused on the energy consumption and performance ofmore » PACs, particularly studies that collect information from field applications of PACs. The operation and energy consumption of PACs may differ among geographic locations and households, because of variations in cooling load, frequency, duration of use, and other user-selected settings. In addition, the performance of building envelope (thermal mass and air leakage) as well as inter-zonal mixing within the building would substantially influence the ability to control and maintain desirable indoor thermal conditions. Lawrence Berkeley National Laboratory (LBNL) conducted an initial field-metering study aimed at increasing the knowledge and data related to PAC operation and energy consumption in the United States.« less

Quantifying Energy and Water Savings in the U.S. Residential Sector.

PubMed

Chini, Christopher M; Schreiber, Kelsey L; Barker, Zachary A; Stillwell, Ashlynn S

2016-09-06

Stress on water and energy utilities, including natural resource depletion, infrastructure deterioration, and growing populations, threatens the ability to provide reliable and sustainable service. This study presents a demand-side management decision-making tool to evaluate energy and water efficiency opportunities at the residential level, including both direct and indirect consumption. The energy-water nexus accounts for indirect resource consumption, including water-for-energy and energy-for-water. We examine the relationship between water and energy in common household appliances and fixtures, comparing baseline appliances to ENERGY STAR or WaterSense appliances, using a cost abatement analysis for the average U.S. household, yielding a potential annual per household savings of 7600 kWh and 39 600 gallons, with most upgrades having negative abatement cost. We refine the national average cost abatement curves to understand regional relationships, specifically for the urban environments of Los Angeles, Chicago, and New York. Cost abatement curves display per unit cost savings related to overall direct and indirect energy and water efficiency, allowing utilities, policy makers, and homeowners to consider the relationship between energy and water when making decisions. Our research fills an important gap of the energy-water nexus in a residential unit and provides a decision making tool for policy initiatives.

Describing the Situational Contexts of Sweetened Product Consumption in a Middle Eastern Canadian Community: Application of a Mixed Method Design

PubMed Central

Moubarac, Jean-Claude; Cargo, Margaret; Receveur, Olivier; Daniel, Mark

2012-01-01

Little is known about the situational contexts in which individuals consume processed sources of dietary sugars. This study aimed to describe the situational contexts associated with the consumption of sweetened food and drink products in a Catholic Middle Eastern Canadian community. A two-stage exploratory sequential mixed-method design was employed with a rationale of triangulation. In stage 1 (n = 62), items and themes describing the situational contexts of sweetened food and drink product consumption were identified from semi-structured interviews and were used to develop the content for the Situational Context Instrument for Sweetened Product Consumption (SCISPC). Face validity, readability and cultural relevance of the instrument were assessed. In stage 2 (n = 192), a cross-sectional study was conducted and exploratory factor analysis was used to examine the structure of themes that emerged from the qualitative analysis as a means of furthering construct validation. The SCISPC reliability and predictive validity on the daily consumption of sweetened products were also assessed. In stage 1, six themes and 40-items describing the situational contexts of sweetened product consumption emerged from the qualitative analysis and were used to construct the first draft of the SCISPC. In stage 2, factor analysis enabled the clarification and/or expansion of the instrument's initial thematic structure. The revised SCISPC has seven factors and 31 items describing the situational contexts of sweetened product consumption. Initial validation of the instrument indicated it has excellent internal consistency and adequate test-retest reliability. Two factors of the SCISPC had predictive validity for the daily consumption of total sugar from sweetened products (Snacking and Energy demands) while the other factors (Socialization, Indulgence, Constraints, Visual Stimuli and Emotional needs) were rather associated to occasional consumption of these products. PMID:23028597

Can electrocoagulation process be an appropriate technology for phosphorus removal from municipal wastewater?

PubMed

Nguyen, D Duc; Ngo, H Hao; Guo, W; Nguyen, T Thanh; Chang, Soon W; Jang, A; Yoon, Yong S

2016-09-01

This paper evaluated a novel pilot scale electrocoagulation (EC) system for improving total phosphorus (TP) removal from municipal wastewater. This EC system was operated in continuous and batch operating mode under differing conditions (e.g. flow rate, initial concentration, electrolysis time, conductivity, voltage) to evaluate correlative phosphorus and electrical energy consumption. The results demonstrated that the EC system could effectively remove phosphorus to meet current stringent discharge standards of less than 0.2mg/L within 2 to 5min. This target was achieved in all ranges of initial TP concentrations studied. It was also found that an increase in conductivity of solution, voltages, or electrolysis time, correlated with improved TP removal efficiency and reduced specific energy consumption. Based on these results, some key economic considerations, such as operating costs, cost-effectiveness, product manufacturing feasibility, facility design and retrofitting, and program implementation are also discussed. This EC process can conclusively be highly efficient in a relatively simple, easily managed, and cost-effective for wastewater treatment system. Copyright © 2016 Elsevier B.V. All rights reserved.

Socio-Demographic Differences in Energy Drink Consumption and Reasons for Consumption among US College Students

ERIC Educational Resources Information Center

Poulos, Natalie S.; Pasch, Keryn E.

2016-01-01

Background: Energy drink consumption has become increasingly prevalent among US college students, yet little is known about current rates of consumption and reasons for consumption among current energy drink users, particularly differences related to gender and race/ethnicity. Objectives: To better understand energy drink consumption alone and…

Perceived stress, energy drink consumption, and academic performance among college students.

PubMed

Pettit, Michele L; DeBarr, Kathy A

2011-01-01

This study explored relationships regarding perceived stress, energy drink consumption, and academic performance among college students. Participants included 136 undergraduates attending a large southern plains university. Participants completed surveys including items from the Perceived Stress Scale(1) and items to describe energy drink consumption, academic performance, and demographics. Positive correlations existed between participants' perceived stress and energy drink consumption. Participants' energy drink consumption and academic performance were negatively correlated. Freshmen (M = 0.330) and sophomores (M = 0.408) consumed a lower number of energy drinks yesterday than juniors (M = 1.000). Males reported higher means than females for selected energy drink consumption items. Statistically significant interactions existed between gender and year in school for selected energy drink consumption items. Results confirm gender differences in energy drink consumption and illuminate a need for education regarding use of energy drinks in response to perceived stress.

Environmental impact of mushroom compost production.

PubMed

Leiva, Francisco; Saenz-Díez, Juan-Carlos; Martínez, Eduardo; Jiménez, Emilio; Blanco, Julio

2016-09-01

This research analyses the environmental impact of the creation of Agaricus bisporus compost packages. The composting process is the intermediate stage of the mushroom production process, subsequent to the mycelium cultivation stage and prior to the fruiting bodies cultivation stage. A full life cycle assessment model of the Agaricus bisporus composting process has been developed through the identification and analysis of the inputs-outputs and energy consumption of the activities involved in the production process. The study has been developed based on data collected from a plant during a 1 year campaign, thereby obtaining accurate information used to analyse the environmental impact of the process. A global analysis of the main stages of the process shows that the process that has the greatest impact in most categories is the compost batch preparation process. This is due to an increased consumption of energy resources by the machinery that mixes the raw materials to create the batch. At the composting process inside the tunnel stage, the activity that has the greatest impact in almost all categories studied is the initial stage of composting. This is due to higher energy consumption during the process compared to the other stages. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

Household energy consumption and expenditures 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-10-05

This presents information about household end-use consumption of energy and expenditures for that energy. These data were collected in the 1993 Residential Energy Consumption Survey; more than 7,000 households were surveyed for information on their housing units, energy consumption and expenditures, stock of energy-consuming appliances, and energy-related behavior. The information represents all households nationwide (97 million). Key findings: National residential energy consumption was 10.0 quadrillion Btu in 1993, a 9% increase over 1990. Weather has a significant effect on energy consumption. Consumption of electricity for appliances is increasing. Houses that use electricity for space heating have lower overall energy expendituresmore » than households that heat with other fuels. RECS collected data for the 4 most populous states: CA, FL, NY, TX.« less

Energy consumption behavior in the commercial sector: An ethnographic analysis of utility bill information and customer comprehension in the workplace

NASA Astrophysics Data System (ADS)

Payne, Christopher Todd

The commercial and industrial sectors of the United States compose roughly one-third of total United States energy consumption. Many studies have suggested that significant cost-effective energy savings opportunities exist in this sector, but there is a gap between predictions of potential and actual investment in energy-efficient technologies. Very few studies have been conducted to examine the decision-making environment of the business sector. In particular, there is essentially no information about how small-business decision-makers make choices about energy consumption. My research is intended to begin the process of understanding this important arena of energy consumption behavior. Using semi-structured interview techniques, I interviewed forty-four businesses in ten states. The focus of the interviews was the business decision-maker's handling and use of the utility bill---the main (often sole) piece of information that links energy consumption to cost. Through the interviews, I collected information about how utility bills are understood and misunderstood, what components of the bill are seen as useful or confusing, and how energy consumption was seen in the context of larger business decision-making. In addition, I collected data on two forms of energy consumption feedback: historic consumption feedback, in which informants compared their current energy use to patterns of their own energy consumption over time; and group comparison consumption feedback, in which informants compared their energy consumption to the consumption of a group of similar energy consumers. Finally, I collected data on sources of information to which decision-makers turned when they wanted to seek more information about energy consumption alternatives. Overall, my findings suggest that the current utility bill format is often misunderstood. In many cases, particularly in the small-business and medium-size-business categories, the link between energy consumption and energy cost is broken. The result is a sense of disempowerment for many consumers. Rather than seeing their energy consumption as something under their control, they instead view the energy bill as an unavoidable component of operating a business, comparing it to other required expenses like rent or taxes. Reaction to changes in the utility bill to provide consumption feedback were mixed. Improvements to self-comparison information provided on the bill were generally viewed positively. On the other hand, energy consumption comparisons with similar groups of customers were viewed with a great deal of skepticism. The idea of group comparison was generally discarded as impractical or invalid. This research improves academic understanding of the energy consumption decision-making environment in the business sector. By developing a better understanding of the context in which these energy consumption decisions are made, the research suggests opportunities for improvements to the mechanisms by which business decision-makers gain information about energy consumption alternatives and energy efficiency opportunities. Improvements to the information provided on the utility bill could enhance the linkage between energy consumption and energy cost for commercial-sector decision-makers, particularly in the small business sector. This could, in turn, lead to greater attention to economic opportunities for energy consumption reduction. Ultimately, improved utility bill information could result in energy and cost savings to business consumers.

The GreenLab Research Facility: A Micro-Grid Integrating Production, Consumption and Storage of Clean Energy

NASA Technical Reports Server (NTRS)

McDowell Bomani, Bilal Mark; Elbuluk, Malik; Fain, Henry; Kankam, Mark D.

2012-01-01

There is a large gap between the production and demand for energy from alternative fuel and alternative renewable energy sources. The NASA Glenn Research Center (GRC) has initiated a laboratory-pilot study that concentrates on using biofuels as viable alternative fuel resources for the field of aviation, as well as, utilizing wind and solar technologies as alternative renewable energy resources, and in addition, the use of pumped water for storage of energy that can be retrieved through hydroelectric generation. This paper describes the GreenLab Research Facility and its power and energy sources with .recommendations for worldwide expansion and adoption of the concept of such a facility

Electrochemical treatment of rice grain-based distillery effluent: chemical oxygen demand and colour removal.

PubMed

Prajapati, Abhinesh Kumar; Chaudhari, Parmesh Kumar

2014-01-01

The electrochemical (EC) treatment of rice grain-based distillery wastewater was carried out in a 1.5 dm3 electrolytic batch reactor using aluminium plate electrodes. With the four-plate configurations, a current density (j) of 89.3 A/m2 and pH 8 was found to be optimal, obtaining a maximum chemical oxygen demand (COD) and colour removal of 93% and 87%, respectively. The chemical dissolution of aluminium was strongly influenced by initial pH (pHi). At higher pHi (pH 9.5) anode consumption decreased while energy consumption increased. At the optimal current density 89.3 A/m2, the aluminium electrode consumption was 16.855 g/dm3 wastewater and energy consumption was 31.4 Wh/dm3 achieving a maximum COD removal of 87%. The settling and filterability characteristics ofelectrochemically treated sludge were also analysed at different pH. It was noted that treated slurry at pHi 9.5 gave best settling characteristic, which decreased with increase in pH. EC-treated effluent at pHi 8 had provided best filterability. Characteristics of scum and residues are also analysed at different pH.

U.S.– India Joint Center for Building Energy Research and Development (CBERD) Caring for the Energy Health of Healthcare Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singh, Reshma; Mathew, Paul; Granderson, Jessica

The U.S.-India Joint Center for Building Energy Research & Development (CBERD), created through the Partnership to Accelerate Clean Energy (PACE) agreement between the United States and India, is a research and development (R&D) center with over 30 institutional and industry partners from both nations. This five-year presidential initiative is jointly funded by the U.S. Department of Energy and the Government of India. CBERD aims to build upon a foundation of collaborative knowledge, tools, and technologies, and human capabilities that will increase development of high-performance buildings. To reach this goal, the R&D focuses on energy use reduction throughout the entire lifemore » cycle of buildings—i.e., design, construction, and operations. During the operations phase of buildings, even with best-practice energy-efficient design, actual energy use can be much higher than the design intent. Every day, much of the energy consumed by buildings serves no purpose (Roth et al. 2005). Building energy information systems (EIS) are commercially available systems that building owners and facility managers use to assess their building operations, measure, visualize, analyze, and report energy cost and consumption. Energy information systems can enable significant energy savings by tracking energy use, identifying consumption patterns, and benchmarking performance against similar buildings, thereby identifying improvement opportunities. The CBERD team has identified potential energy savings of approximately 2 quads of primary energy in the United States, while industry building energy audits in India have indicated potential energy savings of up to 30 percent in commercial buildings such as offices. Additionally, the CBERD team has identified healthcare facilities (e.g., hospitals, clinics), hotels, and offices as the three of the highest-growth sectors in India that have significant energy consumption, and that would benefit the most from implementation of EIS.« less

An energy-aware routing protocol for query-based applications in wireless sensor networks.

PubMed

Ahvar, Ehsan; Ahvar, Shohreh; Lee, Gyu Myoung; Crespi, Noel

2014-01-01

Wireless sensor network (WSN) typically has energy consumption restriction. Designing energy-aware routing protocol can significantly reduce energy consumption in WSNs. Energy-aware routing protocols can be classified into two categories, energy savers and energy balancers. Energy saving protocols are used to minimize the overall energy consumed by a WSN, while energy balancing protocols attempt to efficiently distribute the consumption of energy throughout the network. In general terms, energy saving protocols are not necessarily good at balancing energy consumption and energy balancing protocols are not always good at reducing energy consumption. In this paper, we propose an energy-aware routing protocol (ERP) for query-based applications in WSNs, which offers a good trade-off between traditional energy balancing and energy saving objectives and supports a soft real time packet delivery. This is achieved by means of fuzzy sets and learning automata techniques along with zonal broadcasting to decrease total energy consumption.

An Energy-Aware Routing Protocol for Query-Based Applications in Wireless Sensor Networks

PubMed Central

Crespi, Noel

2014-01-01

Wireless sensor network (WSN) typically has energy consumption restriction. Designing energy-aware routing protocol can significantly reduce energy consumption in WSNs. Energy-aware routing protocols can be classified into two categories, energy savers and energy balancers. Energy saving protocols are used to minimize the overall energy consumed by a WSN, while energy balancing protocols attempt to efficiently distribute the consumption of energy throughout the network. In general terms, energy saving protocols are not necessarily good at balancing energy consumption and energy balancing protocols are not always good at reducing energy consumption. In this paper, we propose an energy-aware routing protocol (ERP) for query-based applications in WSNs, which offers a good trade-off between traditional energy balancing and energy saving objectives and supports a soft real time packet delivery. This is achieved by means of fuzzy sets and learning automata techniques along with zonal broadcasting to decrease total energy consumption. PMID:24696640

Defining Toll Fee of Wheeling Renewable with Reference to a Gas Pipeline in Indonesia

NASA Astrophysics Data System (ADS)

Hakim, Amrullah

2017-07-01

Indonesia has a huge number of renewable energy sources (RE) however; the utilization of these is currently very low. The main challenge of power production is its alignment with consumption levels; supply should equal demand at all times. There is a strong initiative from corporations with high energy demand, compared to other sectors, to apply a renewable portfolio standard for their energy input, e.g. 15% of their energy consumption requirement must come from a renewable energy source. To support this initiative, the utilization of power wheeling will help large factories on industrial estates to source firm and steady renewables from remote sites. The wheeling renewable via PLN’s transmission line has been regulated under the Ministry Decree in 2015 however; the tariff or toll fee has not yet been defined. The potential project to apply wheeling renewable will obtain power supply from a geothermal power plant, with power demand from the scattered factories under one company. This is the concept driving the application of power wheeling in the effort to push the growth of renewable energy in Indonesia. Given that the capacity of PLN’s transmission line are normally large and less congested compared to distribution line, the wheeling renewable can accommodate the scattered factories locations which then results in the cheaper toll fee of the wheeling renewable. Defining the best toll fee is the main topic of this paper with comparison of the toll fee of the gas pipeline infrastructure in Indonesia, so that it can be applied massively to achieve COP21’s commitment.

Initial test results with a single-cylinder rhombic-drive Stirling engine. [to be applied to automobile engine design to conserve energy

NASA Technical Reports Server (NTRS)

Cairelli, J. E.; Thieme, L. G.; Walter, R. J.

1978-01-01

A 6 kW (8 hp), single-cylinder, rhombic-drive Stirling engine was restored to operating condition, and preliminary characterization tests run with hydrogen and helium as the working gases. Initial tests show the engine brake specific fuel consumption (BSFC) with hydrogen working gas to be within the range of BSFC observed by the Army at Fort Belvoir, Virginia, in 1966. The minimum system specific fuel consumption (SFC) observed during the initial tests with hydrogen was 669 g/kW hr (1.1 lb/hpx hr), compared with 620 g/kWx hr (1.02 lb/hpx hr) for the Army tests. However, the engine output power for a given mean compression-space pressure was lower than for the Army tests. The observed output power at a working-space pressure of 5 MPa (725 psig) was 3.27 kW (4.39 hp) for the initial tests and 3.80 kW (5.09 hp) for the Army tests. As expected, the engine power with helium was substantially lower than with hydrogen.

An Analysis of the Use of Energy Audits, Solar Panels, and Wind Turbines to Reduce Energy Consumption from Non Renewable Energy Sources

DTIC Science & Technology

2015-04-15

the Use of Energy Audits, Solar Panels, and Wind Turbines to Reduce Energy Consumption from Non Renewable Energy Sources Energy is a National...Park, NC 27709-2211 Energy Audits, Energy Conservation, Renewable Energy, Solar Energy, Wind Turbine Use, Energy Consumption REPORT DOCUMENTATION PAGE 11...in non peer-reviewed journals: An Analysis of the Use of Energy Audits, Solar Panels, and Wind Turbines to Reduce Energy Consumption from Non

[Energy Consumption Comparison and Energy Saving Approaches for Different Wastewater Treatment Processes in a Large-scale Reclaimed Water Plant].

PubMed

Yang, Min; Li, Ya-ming; Wei, Yuan-song; Lü, Jian; Yu, Da-wei; Liu, Ji-bao; Fan, Yao-bo

2015-06-01

Energy consumption is the main performance indicator of reclaimed water plant (RWP) operation. Methods of specific energy consumption analysis, unit energy consumption analysis and redundancy analysis were applied to investigate the composition and spatio-temporal distribution of energy consumption in Qinghe RWP with inverted A2/O, A2/O and A2/O-MBR processes. And the A2/ O-MBR process was mainly analyzed to identify the main nodes and causes for high energy consumption, approaches for energy saving were explored, and the energy consumption before and after upgrading for energy saving was compared. The results showed that aeration was the key factor affecting energy consumption in both conventional and A2/O-MBR processes, accounting for 42.97% and 50.65% of total energy consumption, respectively. A pulsating aeration allowed an increasing membrane flux and remarkably reduced the energy consumption of the A2/O-MBR process while still meeting the effluent standard, e.g., the membrane flux was increased by 20%, and the energy consumptions per kiloton wastewater and kilogram COD(removed) were decreased by 42.39% to 0.53 kW-h-kg-3 and by 54.74% to 1.29 kW x h x kg(-1), respectively. The decrease of backflow ratio in the A2/O-MBR process within a certain range would not deteriorate the effluent quality due to its insignificant correlation with the effluent quality, and therefore may be considered as one of the ways for further energy saving.

Design methodology analysis: design and operational energy studies in a new high-rise office building. Volume 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1983-02-01

Work on energy consumption in a large office building is reported, including the following tasks: (1) evaluating and testing the effectiveness of the existing ASHRAE 90-75 and 90-80 standards; (2) evaluating the effectiveness of the BEPS; (3) evaluating the effectiveness of some envelope and lighting design variables towards achieving the BEPS budgets; and (4) comparing the computer energy analysis technique, DOE-2.1, with manual calculation procedures. These tasks are the initial activities in the energy analysis of the Park Plaza Building and will serve as the basis for further understanding the results of ongoing data collection and analysis.

Regression Tree-Based Methodology for Customizing Building Energy Benchmarks to Individual Commercial Buildings

NASA Astrophysics Data System (ADS)

Kaskhedikar, Apoorva Prakash

According to the U.S. Energy Information Administration, commercial buildings represent about 40% of the United State's energy consumption of which office buildings consume a major portion. Gauging the extent to which an individual building consumes energy in excess of its peers is the first step in initiating energy efficiency improvement. Energy Benchmarking offers initial building energy performance assessment without rigorous evaluation. Energy benchmarking tools based on the Commercial Buildings Energy Consumption Survey (CBECS) database are investigated in this thesis. This study proposes a new benchmarking methodology based on decision trees, where a relationship between the energy use intensities (EUI) and building parameters (continuous and categorical) is developed for different building types. This methodology was applied to medium office and school building types contained in the CBECS database. The Random Forest technique was used to find the most influential parameters that impact building energy use intensities. Subsequently, correlations which were significant were identified between EUIs and CBECS variables. Other than floor area, some of the important variables were number of workers, location, number of PCs and main cooling equipment. The coefficient of variation was used to evaluate the effectiveness of the new model. The customization technique proposed in this thesis was compared with another benchmarking model that is widely used by building owners and designers namely, the ENERGY STAR's Portfolio Manager. This tool relies on the standard Linear Regression methods which is only able to handle continuous variables. The model proposed uses data mining technique and was found to perform slightly better than the Portfolio Manager. The broader impacts of the new benchmarking methodology proposed is that it allows for identifying important categorical variables, and then incorporating them in a local, as against a global, model framework for EUI pertinent to the building type. The ability to identify and rank the important variables is of great importance in practical implementation of the benchmarking tools which rely on query-based building and HVAC variable filters specified by the user.

10 CFR 431.134 - Uniform test methods for the measurement of energy consumption and water consumption of automatic...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Uniform test methods for the measurement of energy consumption and water consumption of automatic commercial ice makers. 431.134 Section 431.134 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Automatic Commercial Ice Makers Test...

10 CFR 431.134 - Uniform test methods for the measurement of energy consumption and water consumption of automatic...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Uniform test methods for the measurement of energy consumption and water consumption of automatic commercial ice makers. 431.134 Section 431.134 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Automatic Commercial Ice Makers Test...

Power-Efficient Beacon Recognition Method Based on Periodic Wake-Up for Industrial Wireless Devices.

PubMed

Song, Soonyong; Lee, Donghun; Jang, Ingook; Choi, Jinchul; Son, Youngsung

2018-04-17

Energy harvester-integrated wireless devices are attractive for generating semi-permanent power from wasted energy in industrial environments. The energy-harvesting wireless devices may have difficulty in their communication with access points due to insufficient power supply for beacon recognition during network initialization. In this manuscript, we propose a novel method of beacon recognition based on wake-up control to reduce instantaneous power consumption in the initialization procedure. The proposed method applies a moving window for the periodic wake-up of the wireless devices. For unsynchronized wireless devices, beacons are always located in the same positions within each beacon interval even though the starting offsets are unknown. Using these characteristics, the moving window checks the existence of the beacon associated withspecified resources in a beacon interval, checks again for neighboring resources at the next beacon interval, and so on. This method can reduce instantaneous power and generates a surplus of charging time. Thus, the proposed method alleviates the problems of power insufficiency in the network initialization. The feasibility of the proposed method is evaluated using computer simulations of power shortage in various energy-harvesting conditions.

Design of an Open Smart Energy Gateway for Smart Meter Data Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Page, Janie; McParland, Chuck; Piette, Mary Ann

With the widespread deployment of electronic interval meters, commonly known as smart meters, came the promise of real-time data on electric energy consumption. Recognizing an opportunity to provide consumers access to their near real-time energy consumption data directly from their installed smart meter, we designed a mechanism for capturing those data for consumer use via an open smart energy gateway (OpenSEG). By design, OpenSEG provides a clearly defined boundary for equipment and data ownership. OpenSEG is an open-source data management platform to enable better data management of smart meter data. Effectively, it is an information architecture designed to work withmore » the ZigBee Smart Energy Profile 1.x (SEP 1.x). It was specifically designed to reduce cyber-security risks and provide secure information directly from smart meters to consumers in near real time, using display devices already owned by the consumers. OpenSEG stores 48 hours of recent consumption data in a circular cache using a format consistent with commonly available archived (not real-time) consumption data such as Green Button, which is based on the Energy Services Provider Interface (ESPI) data standard. It consists of a common XML format for energy usage information and a data exchange protocol to facilitate automated data transfer upon utility customer authorization. Included in the design is an application program interface by which users can acquire data from OpenSEG for further post processing. A sample data display application is included in the initial software product. The data display application demonstrates that OpenSEG can help electricity use data to be retrieved from a smart meter and ported to a wide variety of user-owned devices such as cell phones or a user-selected database. This system can be used for homes, multi-family buildings, or small commercial buildings in California.« less

Options to improve energy efficiency for educational building

NASA Astrophysics Data System (ADS)

Jahan, Mafruha

The cost of energy is a major factor that must be considered for educational facility budget planning purpose. The analysis of energy related issues and options can be complex and requires significant time and detailed effort. One way to facilitate the inclusion of energy option planning in facility planning efforts is to utilize a tool that allows for quick appraisal of the facility energy profile. Once such an appraisal is accomplished, it is then possible to rank energy improvement options consistently with other facility needs and requirements. After an energy efficiency option has been determined to have meaningful value in comparison with other facility planning options, it is then possible to utilize the initial appraisal as the basis for an expanded consideration of additional facility and energy use detail using the same analytic system used for the initial appraisal. This thesis has developed a methodology and an associated analytic model to assist in these tasks and thereby improve the energy efficiency of educational facilities. A detailed energy efficiency and analysis tool is described that utilizes specific university building characteristics such as size, architecture, envelop, lighting, occupancy, thermal design which allows reducing the annual energy consumption. Improving the energy efficiency of various aspects of an educational building's energy performance can be complex and can require significant time and experience to make decisions. The approach developed in this thesis initially assesses the energy design for a university building. This initial appraisal is intended to assist administrators in assessing the potential value of energy efficiency options for their particular facility. Subsequently this scoping design can then be extended as another stage of the model by local facility or planning personnel to add more details and engineering aspects to the initial screening model. This approach can assist university planning efforts to identify the most cost effective combinations of energy efficiency strategies. The model analyzes and compares the payback periods of all proposed Energy Performance Measures (EPMs) to determine which has the greatest potential value.

Union Carbide's PECOP cops $500,000 fuel cut

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crawford, E.

1979-10-29

Union Carbide's Plant Energy Cost Optimization Program (POCOP) is saving $500,000 a year at a Taft, Louisiana chemical complex. Day-to-day decisions affecting fuel costs and plant operations are based on a system of computerized data-gathering and processing. Although Carbide's system is not unique, it is more extensive and more comprehensive than the systems used by other chemical companies. The plant has decreased its energy consumption 12% below the 1972 level while increasing production by 30%. The system was initiated in response to the shift from raw materials to energy as the major production cost.

Energy, The Environment And Astronomy: Education And Action

NASA Astrophysics Data System (ADS)

Rodgers, Bernadette; Doppmann, G.; Kalas, P.; Lacy, J.; Beck, T.; Marshall, P. J.

2010-01-01

The specter of global climate change is arguably the most pressing scientific, social and ethical issue of our time. Although the relatively small field of astronomy represents only a fraction of the total human carbon emissions, astronomers have a great potential, and therefore perhaps a great responsibility, to educate themselves and the public on this issue. In addition, the average per capita carbon emissions of professional astronomers are not small, and our profession can do much to reduce its energy consumption and maximize the cost-benefit ratio of our work. At the January AAS meeting, we are organizing a half-day splinter meeting titled "Energy, the Environment and Astronomy: Education and Action". The focus will be on energy conservation and education as it relates to professional astronomy. Education focuses on informing ourselves, our students and the general public with which we interact, about the real issues, the necessary actions, and the likely consequences of various energy consumption and carbon emission scenarios. Action focuses on effective energy conservation and renewable energy initiatives within professional astronomy. Air travel, solar energy at ground-based observatories, and Gemini's "Green Initiative” are among the topics that will be discussed. The splinter meeting will be open to all and will include expert speakers from outside astronomy, contributed talks by astronomers, and a discussion session.

The energy trilogy: An integrated sustainability model to bridge wastewater treatment plant energy and emissions gaps

NASA Astrophysics Data System (ADS)

Al-Talibi, A. Adhim

An estimated 4% of national energy consumption is used for drinking water and wastewater services. Despite the awareness and optimization initiatives for energy conservation, energy consumption is on the rise owing to population and urbanization expansion and to commercial and industrial business advancement. The principal concern is since energy consumption grows, the higher will be the energy production demand, leading to an increase in CO2 footprints and the contribution to global warming potential. This research is in the area of energy-water nexus, focusing on wastewater treatment plant (WWTP) energy trilogy -- the group of three related entities, which includes processes: (1) consuming energy, (2) producing energy, and (3) the resulting -- CO2 equivalents. Detailed and measurable energy information is not readily obtained for wastewater facilities, specifically during facility preliminary design phases. These limitations call for data-intensive research approach on GHG emissions quantification, plant efficiencies and source reduction techniques. To achieve these goals, this research introduced a model integrating all plant processes and their pertinent energy sources. In a comprehensive and "Energy Source-to-Effluent Discharge" pattern, this model is capable of bridging the gaps of WWTP energy, facilitating plant designers' decision-making for meeting energy assessment, sustainability and the environmental regulatory compliance. Protocols for estimating common emissions sources are available such as for fuels, whereas, site-specific emissions for other sources have to be developed and are captured in this research. The dissertation objectives were met through an extensive study of the relevant literature, models and tools, originating comprehensive lists of processes and energy sources for WWTPs, locating estimation formulas for each source, identifying site specific emissions factors, and linking the sources in a mathematical model for site specific CO2 e determination. The model was verified and showed a good agreement with billed and measured data from a base case study. In a next phase, a supplemental computational tool can be created for conducting plant energy design comparisons and plant energy and emissions parameters assessments. The main conclusions drawn from this research is that current approaches are severely limited, not covering plant's design phase and not fully considering the balance of energy consumed (EC), energy produced (EP) and the resulting CO2 e emission integration. Finally their results are not representative. This makes reported governmental and institutional national energy consumption figures incomplete and/or misleading, since they are mainly considering energy consumptions from electricity and some fuels or certain processes only. The distinction of the energy trilogy model over existing approaches is based on the following: (1) the ET energy model is unprecedented, prepared to fit WWTP energy assessment during the design and rehabilitation phases, (2) links the energy trilogy eliminating the need for using several models or tools, (3) removes the need for on-site expensive energy measurements or audits, (4) offers alternatives for energy optimization during plant's life-cycle, and (5) ensures reliable GHG emissions inventory reporting for permitting and regulatory compliance.

Synthesis of Biodiesel from Crude Palm Oil by Using Contact Glow Discharge Electrolysis

NASA Astrophysics Data System (ADS)

Saksono, Nelson; Aditya Siswosoebrotho, Danar; Pranata, Jeremia J. C.; Bismo, Setijo

2018-03-01

This research has evaluated the use of Contact Glow Discharge Electrolysis method in the synthesis of biodiesel. The purpose of this research is to get the synthesis process and biodiesel product. The solution used is the mix of Crude Palm Oil and methanol with molar ratio of 1:24, and catalyst of NaOH and KOH with variation of concentration 0.5% - 1.5%-wt. The result shows that the biodiesel can be made from transesterification reaction that may be initiated by radical methoxide. The use of electrolyte KOH is better than NaOH based on the yield of biodiesel and the energy consumption. The optimum yield reaches 97%, at the synthesis for 30 minutes with the use of KOH 1%-wt with the energy consumption of 1.32 kJ/mL.

Trends in Renewable Energy Consumption and Electricity

EIA Publications

2012-01-01

Presents a summary of the nation’s renewable energy consumption in 2010 along with detailed historical data on renewable energy consumption by energy source and end-use sector. Data presented also includes renewable energy consumption for electricity generation and for non-electric use by energy source, and net summer capacity and net generation by energy source and state. The report covers the period from 2006 through 2010.

10 CFR 431.134 - Uniform test methods for the measurement of energy consumption and water consumption of automatic...

Code of Federal Regulations, 2011 CFR

2011-01-01

... consumption and water consumption of automatic commercial ice makers. 431.134 Section 431.134 Energy... EQUIPMENT Automatic Commercial Ice Makers Test Procedures § 431.134 Uniform test methods for the measurement of energy consumption and water consumption of automatic commercial ice makers. (a) Scope. This...

Net Zero Energy Military Installations: A Guide to Assessment and Planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Booth, S.; Barnett, J.; Burman, K.

2010-08-01

The U.S. Department of Defense (DoD) recognizes the strategic importance of energy to its mission, and is working to reduce energy consumption and enhance energy self-sufficiency by drawing on local clean energy sources. A joint initiative formed between DoD and the U.S. Department of Energy (DOE) in 2008 to address military energy use led to a task force to examine the potential for net zero energy military installations, which would produce as much energy on site as they consume in buildings, facilities, and fleet vehicles. This report presents an assessment and planning process to examine military installations for net zeromore » energy potential. Net Zero Energy Installation Assessment (NZEIA) presents a systematic framework to analyze energy projects at installations while balancing other site priorities such as mission, cost, and security.« less

An Exploration of the Relationship between Improvements in Energy Efficiency and Life-Cycle Energy and Carbon Emissions using the BIRDS Low-Energy Residential Database.

PubMed

Kneifel, Joshua; O'Rear, Eric; Webb, David; O'Fallon, Cheyney

2018-02-01

To conduct a more complete analysis of low-energy and net-zero energy buildings that considers both the operating and embodied energy/emissions, members of the building community look to life-cycle assessment (LCA) methods. This paper examines differences in the relative impacts of cost-optimal energy efficiency measure combinations depicting residential buildings up to and beyond net-zero energy consumption on operating and embodied flows using data from the Building Industry Reporting and Design for Sustainability (BIRDS) Low-Energy Residential Database. Results indicate that net-zero performance leads to a large increase in embodied flows (over 40%) that offsets some of the reductions in operational flows, but overall life-cycle flows are still reduced by over 60% relative to the state energy code. Overall, building designs beyond net-zero performance can partially offset embodied flows with negative operational flows by replacing traditional electricity generation with solar production, but would require an additional 8.34 kW (18.54 kW in total) of due south facing solar PV to reach net-zero total life-cycle flows. Such a system would meet over 239% of operational consumption of the most energy efficient design considered in this study and over 116% of a state code-compliant building design in its initial year of operation.

Design and development of Building energy simulation Software for prefabricated cabin type of industrial building (PCES)

NASA Astrophysics Data System (ADS)

Zhang, Jun; Li, Ri Yi

2018-06-01

Building energy simulation is an important supporting tool for green building design and building energy consumption assessment, At present, Building energy simulation software can't meet the needs of energy consumption analysis and cabinet level micro environment control design of prefabricated building. thermal physical model of prefabricated building is proposed in this paper, based on the physical model, the energy consumption calculation software of prefabricated cabin building(PCES) is developed. we can achieve building parameter setting, energy consumption simulation and building thermal process and energy consumption analysis by PCES.

Multiple response optimization for high efficiency energy saving treatment of rhodamine B wastewater in a three-dimensional electrochemical reactor.

PubMed

Ji, Jing; Liu, Yang; Yang, Xue-Yuan; Xu, Juan; Li, Xiu-Yan

2018-07-15

The removal of high-concentration rhodamine B (RhB) wastewater was investigated in a three-dimensional electrochemical reactor (3DER) packed with granular activated carbon (GAC) particle electrodes. Response surface methodology (RSM) coupled with grey relational analysis (GRA) was used to evaluate the effects of voltage, initial pH, aeration rate and NaCl dosage on RhB removal and energy consumption of the 3DER. The optimal conditions were determined as voltage 7.25 V, pH 5.99, aeration rate 151.13 mL/min, and NaCl concentration 0.11 mol/L. After 30 min electrolysis, COD removal rate could arrive at 60.13% with an extremely low energy consumption of 6.22 kWh/kg COD. The voltage and NaCl were demonstrated to be the most significant factors affecting the COD removal and energy consumption of 3DER. The intermediates generated during the treatment process were identified and the possible degradation pathway of RhB was proposed. It is worth noting that 3DER also showed an excellent performance in total nitrogen (TN) removal under the optimal condition. The activated chlorine generated from chloride had great contributions to eliminate carbon and nitrogen of RhB wastewater. The treatment effluent had a good biodegradability, which was suitable for subsequent biological treatment. Copyright © 2018 Elsevier Ltd. All rights reserved.

A sustainable manufacturing system design: A fuzzy multi-objective optimization model.

PubMed

Nujoom, Reda; Mohammed, Ahmed; Wang, Qian

2017-08-10

In the past decade, there has been a growing concern about the environmental protection in public society as governments almost all over the world have initiated certain rules and regulations to promote energy saving and minimize the production of carbon dioxide (CO 2 ) emissions in many manufacturing industries. The development of sustainable manufacturing systems is considered as one of the effective solutions to minimize the environmental impact. Lean approach is also considered as a proper method for achieving sustainability as it can reduce manufacturing wastes and increase the system efficiency and productivity. However, the lean approach does not include environmental waste of such as energy consumption and CO 2 emissions when designing a lean manufacturing system. This paper addresses these issues by evaluating a sustainable manufacturing system design considering a measurement of energy consumption and CO 2 emissions using different sources of energy (oil as direct energy source to generate thermal energy and oil or solar as indirect energy source to generate electricity). To this aim, a multi-objective mathematical model is developed incorporating the economic and ecological constraints aimed for minimization of the total cost, energy consumption, and CO 2 emissions for a manufacturing system design. For the real world scenario, the uncertainty in a number of input parameters was handled through the development of a fuzzy multi-objective model. The study also addresses decision-making in the number of machines, the number of air-conditioning units, and the number of bulbs involved in each process of a manufacturing system in conjunction with a quantity of material flow for processed products. A real case study was used for examining the validation and applicability of the developed sustainable manufacturing system model using the fuzzy multi-objective approach.

Energy drink consumption and marketing in South Africa.

PubMed

Stacey, Nicholas; van Walbeek, Corné; Maboshe, Mashekwa; Tugendhaft, Aviva; Hofman, Karen

2017-12-01

Energy drinks are a fast-growing class of beverage containing high levels of caffeine and sugar. Advertising and marketing have been key to their growth in South Africa. This paper documents trends in energy drink consumption and energy drink advertising, and examines the relationship between exposure to energy drink advertising and consumption. Logistic regressions were estimated of categories of energy drink consumption on individual characteristics, as well as exposure to energy drink advertising. Exposure to advertising is measured by reported viewing of channels high in energy drink advertising. Energy drink consumption in South Africa is higher among younger, wealthier males. Spending on energy drink advertising is mostly focused on television. Targeted channels include youth, sports and general interest channels. Viewers of channels targeted by energy drink advertisers have higher odds of any and moderate levels of energy drinks consumption. Copyright © 2017 Elsevier Inc. All rights reserved.

Quantifying a cellular automata simulation of electric vehicles

NASA Astrophysics Data System (ADS)

Hill, Graeme; Bell, Margaret; Blythe, Phil

2014-12-01

Within this work the Nagel-Schreckenberg (NS) cellular automata is used to simulate a basic cyclic road network. Results from SwitchEV, a real world Electric Vehicle trial which has collected more than two years of detailed electric vehicle data, are used to quantify the results of the NS automata, demonstrating similar power consumption behavior to that observed in the experimental results. In particular the efficiency of the electric vehicles reduces as the vehicle density increases, due in part to the reduced efficiency of EVs at low speeds, but also due to the energy consumption inherent in changing speeds. Further work shows the results from introducing spatially restricted speed restriction. In general it can be seen that induced congestion from spatially transient events propagates back through the road network and alters the energy and efficiency profile of the simulated vehicles, both before and after the speed restriction. Vehicles upstream from the restriction show a reduced energy usage and an increased efficiency, and vehicles downstream show an initial large increase in energy usage as they accelerate away from the speed restriction.

TAS::89 0927::TAS RECOVERY - The Lean Green Energy Controller Machine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Teeter, John; Wang, Gene; Moss, David

Achieving efficiency improvements and providing demand-response programs have been identified as key elements of our national energy initiative. The residential market is the largest, yet most difficult, segment to engage in efforts to meet these objectives. This project developed Energy Management System that engages the consumer and enables Smart Grid services, applications, and business processes to address this need. Our innovative solution provides smart controller providing dynamic optimization of energy consumption for the residential energy consumer. Our solution extends the technical platform to include a cloud based Internet of Things (IoT) aggregation of data sensors and actuators the go beyondmore » energy management and extend to life style services provided through compelling mobile and console based user experiences.« less

Can developing countries leapfrog the centralized electrification paradigm?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levin, Todd; Thomas, Valerie M.

Due to the rapidly decreasing costs of small renewable electricity generation 'systems, centralized power systems are no longer a necessary condition of universal access to modern energy services. Developing countries, where centralized electricity infrastructures are less developed, may be able to adopt these new technologies more quickly. We first review the costs of grid extension and distributed solar home systems (SHSs) as reported by a number of different studies. We then present a general analytic framework for analyzing the choice between extending the grid and implementing distributed solar home systems. Drawing upon reported grid expansion cost data for three specificmore » regions, we demonstrate this framework by determining the electricity consumption levels at which the costs of provision through centralized and decentralized approaches are equivalent in these regions. We then calculate SHS capital costs that are necessary for these technologies provide each of five tiers of energy access, as defined by the United Nations Sustainable Energy for All initiative. Our results suggest that solar home systems can play an important role in achieving universal access to basic energy services. The extent of this role depends on three primary factors: SHS costs, grid expansion costs, and centralized generation costs. Given current technology costs, centralized systems will still be required to enable higher levels of consumption; however, cost reduction trends have the potential to disrupt this paradigm. By looking ahead rather than replicating older infrastructure styles, developing countries can leapfrog to a more distributed electricity service model. (C) 2016 International Energy Initiative. Published by Elsevier Inc. All rights reserved.« less

Structural Decomposition Analysis of China’s Industrial Energy Consumption Based on Input-Output Analysis

NASA Astrophysics Data System (ADS)

Huang, X. Y.; Zhou, J. Q.; Wang, Z.; Deng, L. C.; Hong, S.

2017-05-01

China is now at a stage of accelerated industrialization and urbanization, with energy-intensive industries contributing a large proportion of economic growth. In this study, we examined industrial energy consumption by decomposition analysis to describe the driving factors of energy consumption in China. Based on input-output (I-O) tables from the World Input-Output Database (WIOD) website and China’s energy use data from 1995 to 2011, we studied the sectorial changes of energy efficiency during the examined period. The results showed that all industries increased their energy efficiency. Energy consumption was decomposed into three factors by the logarithmic mean Divisia index (LMDI) method. The increase in production output was the leading factor that drives up China’s energy consumption. World Trade Organization accession and financial crises had great impact on the energy consumption. Based on these results, a series of energy policy suggestions for decision-makers has been proposed.

Energy drink consumption and the relation to socio-demographic factors and health behaviour among young adults in Denmark. A population-based study.

PubMed

Friis, Karina; Lyng, Jeppe I; Lasgaard, Mathias; Larsen, Finn B

2014-10-01

The objective of this study is to estimate the prevalence of energy drink consumption and examine the associations of socio-demographic factors and health behaviour with energy drink consumption among young adults in Denmark. The study is based on a public health survey from 2010 (n = 3923). Multiple logistic regression analyses were used to analyse the association between weekly consumption of energy drink and the potential explanatory factors of interest. In total, 15.8 % of the young adults drink energy drinks on a weekly basis. Men have higher odds of weekly energy drink consumption than women. The study also shows that young age, being employed and having a low educational level are associated with weekly energy drink consumption. According to health behaviour, daily smoking, high amounts of alcohol consumption, alcoholic binge drinking and being overweight are associated with weekly energy drink consumption. Compared with other European countries the prevalence of energy drink consumption is relatively low in Denmark. In Denmark energy drink consumption is typically a male phenomenon and there is a clear social gradient in the prevalence of energy drink consumption where the intake is far more common among people with low levels of education than among people with higher levels of education. This study also shows that there is some kind of 'add on' effect of energy drinks, meaning that people who also use other stimulants-such as alcohol and cigarettes-are more inclined to consume energy drinks. © The Author 2014. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

Regular energy drink consumption is associated with the risk of health and behavioural problems in adolescents.

PubMed

Holubcikova, Jana; Kolarcik, Peter; Madarasova Geckova, Andrea; Reijneveld, Sijmen A; van Dijk, Jitse P

2017-05-01

Consumption of energy drinks has become popular and frequent among adolescents across Europe. Previous research showed that regular consumption of these drinks was associated with several health and behavioural problems. The aim of the present study was to determine the socio-demographic groups at risk for regular energy drink consumption and to explore the association of regular energy drinks consumption with health and behavioural problems and negative school experiences in adolescents. Data from the Health Behaviour in School-aged Children Study conducted in 2014 in Slovakia were analysed. We assessed socio-demographic characteristics, energy drink consumption, health and behavioural problems and negative school experiences based on self-reports from 8977 adolescents aged 11-15 years (mean age/standard deviation 13/1.33; 50.0% boys). The prevalence of regular energy drink consumption in the present sample was 20.6% (95%CI: 20%-21%). Regular energy drink consumption was more frequent among boys and older adolescents. Adolescents with a medium-level family affluence were less likely to drink energy drinks regularly. Adolescents who consumed energy drinks regularly had more health and behavioural problems and negative school experiences. Adolescents drinking energy drinks are at risk of a wide range of negative outcomes and should be specifically addressed by preventive interventions. What is Known • Energy drink consumption has become popular and frequent among adolescents across Europe. • There is growing evidence that energy drink consumption is related to negative social, emotional and health outcomes, but only a few studies have explored this relationship in adolescents. What is New • Regular energy drink consumption was more frequent among boys and adolescents reporting low family affluence and increased with age. • Adolescents reporting regular energy drink consumption were in higher risk to suffer from health and behavioural problems and negative school experiences.

The analysis of energy consumption of the transport and manipulation process of Fanuc AM100iB robot

NASA Astrophysics Data System (ADS)

Cholewa, A.; Świder, J.; Zbilski, A.

2017-08-01

This article describes test results of energy consumption of Fanuc ArcMate 100iB robot during realization of the transport and manipulation process. The energy consumption test involved the acquisition of values of angular positions of the robot’s encoder shafts and values of tensions and expansions of the electrical currents in three phases of each engine. Based on the simulation results, the analysis of energy consumption was carried out, which specified the tested palletizing process using the set of complete and partial decompositions of the energy consumption of all these factors, which in significant degree impacted the amount of energy taken during the process. Quality of the data provided by the analysis of energy consumption was assessed through validation of results, which involved direct comparison of corresponding parameters, which values were measured and calculated. With regards to the developed analysis of energy consumption, computerized techniques were used to determine the impact of all material factors on the total energy consumption of the machine. The work presents the most significant results of the obtained outcomes.

Optimal Energy Consumption Analysis of Natural Gas Pipeline

PubMed Central

Liu, Enbin; Li, Changjun; Yang, Yi

2014-01-01

There are many compressor stations along long-distance natural gas pipelines. Natural gas can be transported using different boot programs and import pressures, combined with temperature control parameters. Moreover, different transport methods have correspondingly different energy consumptions. At present, the operating parameters of many pipelines are determined empirically by dispatchers, resulting in high energy consumption. This practice does not abide by energy reduction policies. Therefore, based on a full understanding of the actual needs of pipeline companies, we introduce production unit consumption indicators to establish an objective function for achieving the goal of lowering energy consumption. By using a dynamic programming method for solving the model and preparing calculation software, we can ensure that the solution process is quick and efficient. Using established optimization methods, we analyzed the energy savings for the XQ gas pipeline. By optimizing the boot program, the import station pressure, and the temperature parameters, we achieved the optimal energy consumption. By comparison with the measured energy consumption, the pipeline now has the potential to reduce energy consumption by 11 to 16 percent. PMID:24955410

Improved immunization strategy to reduce energy consumption on nodes traffic

NASA Astrophysics Data System (ADS)

Yuan, Jiazheng; Zhao, Dongyan; Long, Keping; Zheng, Yongrong

2017-04-01

The increasing requirement of transmission network sizes would result in huge energy consumption with communication traffic. Green communication technologies are expected to help in reducing energy consumption impact to environment. Therefore, it is important to design energy-efficient strategy that can decrease energy consumption. This paper proposes to use the acquaintance and improved targeted immunization strategies from complex systems to resolve energy consumption issues and uses traffic as measure standard to obtain a stable threshold. The simulation results show that the improved control strategy is better and more effective to save as much energy as possible.

IMPACT OF IMPROVED FAT-MEAT PRODUCTS CONSUMPTION ON ANTHROPOMETRIC MARKERS AND NUTRIENT INTAKES OF MALE VOLUNTEERS AT INCREASED CARDIOVASCULAR RISK.

PubMed

Celada, Paloma; Delgado-Pando, Gonzalo; Olmedilla-Alonso, Begoña; Jiménez-Colmenero, Francisco; Ruperto, Mar; Sánchez-Muniz, Francisco J

2015-08-01

meat products have been recognized to be adequate matrix for incorporating functional ingredients. The impact of meat products formulated by replacing animal fat with a combination of olive, linseed and fish oils on energy and nutrient intakes and anthropometric measurements were tested in a non-randomized-controlled- sequential study. eighteen male volunteers at high-CVD risk consumed weekly 200 g frankfurters and 250 g pâtés during three 4-wk periods (reduced fat (RF); n3-enriched- RF (n-3RF), and normal fat (NF)), separated by 4-wk washout. Energy and nutrient intakes, healthy eating index (HEI), and anthropometric changes were evaluated. body fat mass rate-of-change and the waist/ hip ratio significantly differs (p = 0.018 and p = 0.031, respectively) between periods, decreasing body fat mass, waist circumference and waist/hip ratio in RF period and increasing body fat mass in NF one (all p = 0.05). Significant inverse correlations were observed between rate- of-change of BMI and ideal body weight with dietary carbohydrate/SFA ratio in n-3RF period (p = 0.003 and p = 0.006, respectively). Initial diets presented low HEIs (means < 60). Carbohydrate, fat and protein energy contribution was 40%, 41%, and 16%, respectively. More than 33% of volunteers did not initially cover 70% of several minerals and vitamins RDAs. Product consumption improved dietary Zn, Ca, retinol equivalent, folate and vitamin B12 contents in all periods, and ameliorated n-3 PUFA contents and n-6/n-3 PUFA ratio over the n-3RF period. improved-fat meat products appear as functional foods for overweight/obeses since their consumption improved selected body-fat markers, without affecting HEI, macronutrient and energy but their n-3 PUFA and n6/n3 ratio intakes. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Consumption Patterns of Energy Drinks in Portuguese Adolescents from A City in Northern Portugal.

PubMed

Martins, Albino; Ferreira, Carmo; Sousa, Dinis; Costa, Sandra

2018-04-30

Energy drinks are youth-targeted beverages that contain high amounts of caffeine and other stimulants. A number of deleterious health effects associated with consumption of these drinks have already been reported. Despite the health concerns, energy drinks research has been sparse, especially at younger ages. The main purpose of this study was to determine the prevalence of energy drinks consumption and patterns of use among adolescents. Cross-sectional study of students aged between 11 - 17 years-old attending four public schools in Braga, cluster sampled. A self-administrated questionnaire was used to access sociodemographic data, self-reported academic performance as well as energy drinks consumption patterns, attitudes, awareness and associated symptoms. In a total of 1414 adolescents studied (mean age 15.1 ± 1.5 years; 53.9% were females), 56.7% reported to have used energy drinks at least once (62.5% in males; 52.1% in females). Of those, 34% described a regular consumption (at least once a month) and 14.1% a weekly consumption. The most common reasons for energy drinks consumption were the pleasant taste (49%), desire to increase global energy (35%) or sports performance (33%). On average, energy drinks users were older compared with non-users. Energy drinks consumption was associated with male gender and with self-reported worse academic performance. Approximately onethird experienced at least one symptom after consumption. In addition, 39.9% of energy drinks consumers reported mixing those with alcohol. Consumption of energy drinks has been increasing. The prevalence found for its consumption in this study is similar to that reported in the literature. Knowledge about motivation, general awareness of the risks or other variables related to consumption of these drinks might allow a better characterization of this behavior. This study showed a high prevalence of energy drinks consumption among adolescents from a city in Northern Portugal, with self-reported symptoms after consumption and common concomitant use of alcohol.

A study of the capacitive deionisation performance under various operational conditions.

PubMed

Mossad, Mohamed; Zou, Linda

2012-04-30

Capacitive deionisation (CDI) has many advantages over other desalination technologies due to its low energy consumption, less environmental pollution and low fouling potential. The objectives of this study are to investigate the effect of operational conditions on the CDI electrosorption efficiency and energy consumption, to identify ion selectivity in multi-ionic solutions and to probe the effect of dissolved reactive silica on the treatment efficiency. A series of laboratory scale experiments were conducted using a CDI unit with activated carbon electrodes. The electrosorption removal efficiency was inversely related to solution temperature, initial total dissolved salts (TDS) concentration and the applied flow rate. CDI energy consumption (kWh/m(3)) is directly related to the TDS concentration and inversely related to the flow rate. The kinetics analysis indicated that the electrosorption followed pseudo-first-order kinetics model. Ion selectivity on activated carbon electrodes followed the order of Fe(3+)>Ca(2+)>Mg(2+)>Na(+) for cations and SO(4)(2-)>Br(-)>Cl(-)>F(-)>NO(3)(-) for anions. It was found that the dissolved silica was not removed by CDI; no silica fouling was found. The deterioration of activated carbon electrodes was not observed at any time during experiment. Copyright © 2012 Elsevier B.V. All rights reserved.

A Smart Home Test Bed for Undergraduate Education to Bridge the Curriculum Gap from Traditional Power Systems to Modernized Smart Grids

ERIC Educational Resources Information Center

Hu, Qinran; Li, Fangxing; Chen, Chien-fei

2015-01-01

There is a worldwide trend to modernize old power grid infrastructures to form future smart grids, which will achieve efficient, flexible energy consumption by using the latest technologies in communication, computing, and control. Smart grid initiatives are moving power systems curricula toward smart grids. Although the components of smart grids…

Grinding kinetics and equilibrium states

NASA Technical Reports Server (NTRS)

Opoczky, L.; Farnady, F.

1984-01-01

The temporary and permanent equilibrium occurring during the initial stage of cement grinding does not indicate the end of comminution, but rather an increased energy consumption during grinding. The constant dynamic equilibrium occurs after a long grinding period indicating the end of comminution for a given particle size. Grinding equilibrium curves can be constructed to show the stages of comminution and agglomeration for certain particle sizes.

Residential Energy Consumption Survey (RECS): National interim energy consumption survey, 1978-1979, household monthly energy consumption and expenditures. Shopper's guide

NASA Astrophysics Data System (ADS)

Windell, P.

1981-08-01

The data from the National Interim Energy Consumption Survey (NIECS) is available to the public on machine readable magnetic tapes. Brief overviews of the Residential Energy Consumption Survey as a whole and of the NIECS in particular is a brief description of each of the files included in this tape, and a list of the variables in the data set are included. A copy of the fuel supplier record form used to collect consumption and expenditure data for each of the sample households is also included.

Energy consumption in commercial buildings: A comparison with BEPS budgets

NASA Astrophysics Data System (ADS)

1980-09-01

Metered energy consumption data were collected on existing commercial buildings to help establish the proposed building energy performance standards (BEPS). The search has identified 84 buildings whose metered energy consumption is equal to or less than that proposed for their BEPS budgets and another 7 buildings whose metered consumption is less than 20 percent above their BEPS budgets. The methodology used to identify the buildings and to collect their metered energy consumption data are described. The data are analyzed and summarized and conclusions are drawn.

Manufacturing Energy Consumption Survey (MECS)

EIA Publications

2028-01-01

The Manufacturing Energy Consumption Survey (MECS) is a national sample survey that collects information on the stock of U.S. manufacturing establishment, their energy-related building characteristics, and their energy consumption and expenditures.

Manufacturing Energy Consumption Data Show Large Reductions in Both Manufacturing Energy Use and the Energy Intensity of Manufacturing Activity between 2002 and 2010

EIA Publications

2013-01-01

Total energy consumption in the manufacturing sector decreased by 17% from 2002 to 2010, according to data from the U.S. Energy Information Administration's (EIA) Manufacturing Energy Consumption Survey (MECS).

Householders' Mental Models of Domestic Energy Consumption: Using a Sort-And-Cluster Method to Identify Shared Concepts of Appliance Similarity.

PubMed

Gabe-Thomas, Elizabeth; Walker, Ian; Verplanken, Bas; Shaddick, Gavin

2016-01-01

If in-home displays and other interventions are to successfully influence people's energy consumption, they need to communicate about energy in terms that make sense to users. Here we explore householders' perceptions of energy consumption, using a novel combination of card-sorting and clustering to reveal shared patterns in the way people think about domestic energy consumption. The data suggest that, when participants were asked to group appliances which they felt naturally 'went together', there are relatively few shared ideas about which appliances are conceptually related. To the extent participants agreed on which appliances belonged together, these groupings were based on activities (e.g., entertainment) and location within the home (e.g., kitchen); energy consumption was not an important factor in people's categorisations. This suggests messages about behaviour change aimed at reducing energy consumption might better be tied to social practices than to consumption itself.

The Effectiveness of Taiwan Building Energy Regulation under the influence of Future Climate

NASA Astrophysics Data System (ADS)

Weng, Yu-Teng; Huang, Kuo-Tsang

2017-04-01

Building energy consumption comprises circa 40% of the national annual energy usage in Taiwan, and the majority proportion is attributed to the cooling apparatus usage. As cooling energy is closely related to the outdoor climate, it is expected that the future global climate change would amplify its demand. Considering the building energy regulation criteria are the minimum requirements that the building has to be complied with, this study tried to investigate whether the current building energy regulation in Taiwan, initiated in 2013, would still be capable of maintaining the energy use in the future as today's level. The research adopted EnergyPlus to simulate the annual cooling energy use of several virtual office building cases with the constructed hourly future weather data under future climate change scenarios of RCP45 and RCP85 defined by IPCC. The virtual building cases are generated by a structured orthogonal array with each case is constituted by 10 building design parameters. The results revealed that the building energy consumption based on the current regulation criteria failed to maintain at the same level in the future as oppose to nowadays. By comparing to the current cooling energy usage, it would rise by 13% and 22% in RCP45 and RCP85, respectively, at the end of this century. This research further parametrically studied the potential cooling energy mitigation strategies and proposed effective building envelope design schemes in order to neutralize the future building energy increase.

75 FR 63404 - Fossil Fuel-Generated Energy Consumption Reduction for New Federal Buildings and Major...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-15

... [Docket No. EERE-2010-BT-STD-0031] RIN 1904-AB96 Fossil Fuel-Generated Energy Consumption Reduction for... of fossil fuel-generated energy consumption in new Federal buildings and Federal buildings undergoing... full fossil fuel-generated energy consumption reduction level is technically impracticable in light of...

10 CFR 431.64 - Uniform test method for the measurement of energy consumption of commercial refrigerators...

Code of Federal Regulations, 2010 CFR

2010-01-01

... consumption of commercial refrigerators, freezers, and refrigerator-freezers. 431.64 Section 431.64 Energy... method for the measurement of energy consumption of commercial refrigerators, freezers, and refrigerator... energy consumption in kilowatt hours per day (kWh/day) for a given product category and volume or total...

10 CFR 431.294 - Uniform test method for the measurement of energy consumption of refrigerated bottled or canned...

Code of Federal Regulations, 2010 CFR

2010-01-01

... consumption of refrigerated bottled or canned beverage vending machines. 431.294 Section 431.294 Energy... method for the measurement of energy consumption of refrigerated bottled or canned beverage vending... test procedure for energy consumption of refrigerated bottled or canned beverage vending machines shall...

Energy Drink Consumption in Europe: A Review of the Risks, Adverse Health Effects, and Policy Options to Respond

PubMed Central

Breda, João Joaquim; Whiting, Stephen Hugh; Encarnação, Ricardo; Norberg, Stina; Jones, Rebecca; Reinap, Marge; Jewell, Jo

2014-01-01

With the worldwide consumption of energy drinks increasing in recent years, concerns have been raised both in the scientific community and among the general public about the health effects of these products. Recent studies provide data on consumption patterns in Europe; however, more research is needed to determine the potential for adverse health effects related to the increasing consumption of energy drinks, particularly among young people. A review of the literature was conducted to identify published articles that examined the health risks, consequences, and policies related to energy drink consumption. The health risks associated with energy drink consumption are primarily related to their caffeine content, but more research is needed that evaluates the long-term effects of consuming common energy drink ingredients. The evidence indicating adverse health effects due to the consumption of energy drinks with alcohol is growing. The risks of heavy consumption of energy drinks among young people have largely gone unaddressed and are poised to become a significant public health problem in the future. PMID:25360435

Energy drink consumption in europe: a review of the risks, adverse health effects, and policy options to respond.

PubMed

Breda, João Joaquim; Whiting, Stephen Hugh; Encarnação, Ricardo; Norberg, Stina; Jones, Rebecca; Reinap, Marge; Jewell, Jo

2014-01-01

With the worldwide consumption of energy drinks increasing in recent years, concerns have been raised both in the scientific community and among the general public about the health effects of these products. Recent studies provide data on consumption patterns in Europe; however, more research is needed to determine the potential for adverse health effects related to the increasing consumption of energy drinks, particularly among young people. A review of the literature was conducted to identify published articles that examined the health risks, consequences, and policies related to energy drink consumption. The health risks associated with energy drink consumption are primarily related to their caffeine content, but more research is needed that evaluates the long-term effects of consuming common energy drink ingredients. The evidence indicating adverse health effects due to the consumption of energy drinks with alcohol is growing. The risks of heavy consumption of energy drinks among young people have largely gone unaddressed and are poised to become a significant public health problem in the future.

Micromagnetic simulation of energy consumption and excited eigenmodes in elliptical nanomagnetic switches

NASA Astrophysics Data System (ADS)

Carlotti, G.; Madami, M.; Gubbiotti, G.; Tacchi, S.

2014-02-01

Sub-200 nm patterned magnetic dots are key elements for the design of magnetic switches, memory cells or elementary units of nanomagnetic logic circuits. In this paper, we analyse by micromagnetic simulations the magnetization reversal, the dissipated energy and the excited spin eigenmodes in bistable magnetic switches, consisting of elliptical nanodots with 100×60 nm lateral dimensions. Two different strategies for reversal are considered and the relative results compared: (i) the irreversible switching obtained by the application of an external field along the easy axis, in the direction opposite to the initial magnetization; (ii) the precessional switching accomplished by the application of a short magnetic field pulse, oriented perpendicular to the initial magnetization direction. The obtained results are discussed in terms of deviation from the macrospin behavior, energy dissipation and characteristics of the spectrum of spin eigenmodes excited during the magnetization reversal process.

The nexus between energy consumption and financial development: estimating the role of globalization in Next-11 countries.

PubMed

Danish; Saud, Shah; Baloch, Muhammad Awais; Lodhi, Rab Nawaz

2018-04-28

In the modern era of globalization, the economic activities expand with the passage of time. This expansion may increase demand for energy both in developing and developed countries. Therefore, this study assesses the impact of financial development on energy consumption incorporating the role of globalization in Next-11 countries. A group of panel estimation techniques is used to analyze the panel data and time series data for the time 1990-2014. The empirical results of the study suggest that financial development stimulates energy consumption. Also, globalization increases demand for energy consumption, although the single country analysis suggests that the effect of globalization on energy demand is heterogeneous among N-11 countries. Furthermore, feedback hypothesis is confirmed between financial development and energy consumption. Also, bidirectional causality is found between economic growth and energy consumption. The findings urge for the attention of policymaker in emerging countries to develop a strategy to reduce the consequences of energy consumption by controlling resource transfer through globalization to the host country and by adopting energy conversation policies.

ECASTAR: Energy conservation. An assessment of systems, technologies and requirements

NASA Technical Reports Server (NTRS)

1975-01-01

A methodology was presented for a systems approach to energy conservation actions and their potentials and impacts in the United States. Constraints affecting the approach were ranked, and the most important ones are the present economic and technical conditions. The following unresolved issues were identified: consumptive lifestyles vs. conservation ethic, environmental standards vs. energy conservation, capital availability, decentralization and vertical integration vs. centralization, fuel rich regions vs. fuel poor regions, supply vs. end use conservation, life cycle costing vs. initial cost, mandatory savings vs. voluntary savings, labor intensive vs. capital intensive, price control vs. free market. The following recommendations were made: provide action/impact assessment, establish regional energy centers, improve technology articulation with government, design total energy systems, utilize existing systems approach expertise.

Analysis of Final Energy Consumption Patterns in 10 Arab Countries

NASA Astrophysics Data System (ADS)

Al-Hinti, I.; Al-Ghandoor, A.

2009-08-01

This study presents an analysis of the energy consumption patterns in 10 Arab countries: Saudi Arabia, Kuwait, United Arab Emirates (UAE), Syria, Lebanon, Jordan, Egypt, Libya, Tunisia, and Algeria. Commonalities and variations between these countries are discussed and explained through key economic and energy indicators, and the relationship between the overall final energy consumption per capita and the GDP per capita is examined. The distribution of the final energy consumption across different sectors is also analysed, and the patterns of consumption in the industrial, transportation, and residential sectors are discussed with focus on the types of energy consumed, and the main drivers of this consumption. The findings and the conclusions of this study are believed to be beneficial to the national energy policy planners in identifying possible strengths, weaknesses, and areas of emphasis and improvement in their strategic energy plans.

Estimating energy intensity and CO{sub 2} emission reduction potentials in the manufacturing sectors in Thailand

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wangskarn, P.; Khummongkol, P.; Schrattenholzer, L.

The final energy consumption in Thailand increased at about ten percent annually within the last 10 years. To slow the energy demand growth rate while maintaining the country`s economic advance and environmental sustainability, the Energy Conservation Promotion Act (ECPA) was adopted in 1992. With this Act, a comprehensive Energy Conservation Program (ENCON) was initiated. ENCON commits the government to promoting energy conservation, to developing appropriate regulations, and to providing financial and organizational resources for program implementation. Due to this existing ENCON program a great benefit is expected not only to reducing energy consumption, but also to decreasing GHGs emissions substantially.more » This study is a part of the ENCON research program which was supported by the German Federal Government under the program called Prompt-Start Measures to Implement the U.N. Framework Convention on Climate Change (FCCC). The basic activities carried out during the project included (1) An assessment of Thailand`s total and specific energy consumption in the industrial sectors and commercial buildings; (2) Identification of existing and candidate technologies for GHG emission reduction and energy efficiency improvements in specific factories and commercial buildings; and (3) Identification of individual factories and commercial buildings as candidates for detailed further study. Although the energy assessment had been carried out for the commercial buildings also, this paper will cover only the work on the manufacturing sector. On the basis of these steps, 14 factories were visited by the project team and preliminary energy audits were performed. As a result, concrete measures and investments were proposed and classified into two groups according to their economic characteristics. Those investments with a payback time of less than four years were considered together in a Moderate scenario, and those with longer payback times in an Intensive scenario.« less

10 CFR Appendix G to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Unvented Home Heating Equipment

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Uniform Test Method for Measuring the Energy Consumption..., App. G Appendix G to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of... energy consumption for primary electric heaters. For primary electric heaters, calculate the annual...

Beverage consumption and adult weight management: A review.

PubMed

Dennis, Elizabeth A; Flack, Kyle D; Davy, Brenda M

2009-12-01

Total energy consumption among United States adults has increased in recent decades, and energy-containing beverages are a significant contributor to this increase. Because beverages are less satiating than solid foods, consumption of energy-containing beverages may increase energy intake and lead to weight gain; trends in food and beverage consumption coinciding with increases in overweight and obesity support this possibility. The purpose of this review is to present what is known about the effect of beverage consumption on short-term (i.e., meal) energy intake, as well as longer-term effects on body weight. Specific beverages addressed include water, other energy-free beverages (diet soft drinks, coffee and tea), and energy-containing beverages (soft drinks, juices and juice drinks, milk and soy beverages, alcohol). Existing evidence, albeit limited, suggests that encouraging water consumption, and substituting water and other energy-free beverages (diet soft drinks, coffee and tea) for energy-containing beverages may facilitate weight management. Energy-containing beverages acutely increase energy intake, however long-term effects on body weight are uncertain. While there may be health benefits for some beverage categories, additional energy provided by beverages should be compensated for by reduced consumption of other foods in the diet.

Beverage Consumption and Adult Weight Management: A Review

PubMed Central

Dennis, Elizabeth A.; Flack, Kyle D.; Davy, Brenda M.

2010-01-01

Total energy consumption among United States adults has increased in recent decades, and energy-containing beverages are a significant contributor to this increase. Because beverages are less satiating than solid foods, consumption of energy-containing beverages may increase energy intake and lead to weight gain; trends in food and beverage consumption coinciding with increases in overweight and obesity support this possibility. The purpose of this review is to present what is known about the effect of beverage consumption on short-term (i.e., meal) energy intake, as well as longer-term effects on body weight. Specific beverages addressed include water, other energy-free beverages (diet soft drinks, coffee and tea), and energy-containing beverages (soft drinks, juices and juice drinks, milk and soy beverages, alcohol). Existing evidence, albeit limited, suggests that encouraging water consumption, and substituting water and other energy-free beverages (diet soft drinks, coffee and tea) for energy-containing beverages may facilitate weight management. Energy-containing beverages acutely increase energy intake, however long-term effects on body weight are uncertain. While there may be health benefits for some beverage categories, additional energy provided by beverages should be compensated for by reduced consumption of other foods in the diet. PMID:19778754

Intelligent Cooperative MAC Protocol for Balancing Energy Consumption

NASA Astrophysics Data System (ADS)

Wu, S.; Liu, K.; Huang, B.; Liu, F.

To extend the lifetime of wireless sensor networks, we proposed an intelligent balanced energy consumption cooperative MAC protocol (IBEC-CMAC) based on the multi-node cooperative transmission model. The protocol has priority to access high-quality channels for reducing energy consumption of each transmission. It can also balance the energy consumption among cooperative nodes by using high residual energy nodes instead of excessively consuming some node's energy. Simulation results show that IBEC-CMAC can obtain longer network lifetime and higher energy utilization than direct transmission.

Electrical energy consumption control apparatuses and electrical energy consumption control methods

DOEpatents

Hammerstrom, Donald J.

2012-09-04

Electrical energy consumption control apparatuses and electrical energy consumption control methods are described. According to one aspect, an electrical energy consumption control apparatus includes processing circuitry configured to receive a signal which is indicative of current of electrical energy which is consumed by a plurality of loads at a site, to compare the signal which is indicative of current of electrical energy which is consumed by the plurality of loads at the site with a desired substantially sinusoidal waveform of current of electrical energy which is received at the site from an electrical power system, and to use the comparison to control an amount of the electrical energy which is consumed by at least one of the loads of the site.

Study on energy saving effect of IHX on vehicle air conditioning system

NASA Astrophysics Data System (ADS)

Li, Huguang; Tong, Lin; Xu, Ming; Wei, Wangrui; Zhao, Meng; Wang, Long

2018-02-01

In this paper, the performance of Internal Heat Exchanger (IHX) air conditioning system for R134a is investigated in bench test and vehicle test. Comparison for cooling capacity and energy consumption between IHX air conditioning system and traditional tube air conditioning system are conducted. The suction temperature and discharge temperature of compressor is also recorded. The results show that IHX air conditioning system has higher cooling capacity, the vent temperature decrease 2.3 °C in idle condition. But the suction temperature and discharge temperature of compressor increase 10°C. IHX air conditioning system has lower energy consumption than traditional tube air conditioning system. Under the experimental conditions in this paper, the application of IHX can significantly reduce the energy consumption of air conditioning system. At 25°C of environment temperature, AC system energy consumption decrease 14%, compressor energy consumption decrease 16%. At 37°C of environment temperature, AC system energy consumption decrease 16%, compressor energy consumption decrease 13%.

Urban energy consumption and related carbon emission estimation: a study at the sector scale

NASA Astrophysics Data System (ADS)

Lu, Weiwei; Chen, Chen; Su, Meirong; Chen, Bin; Cai, Yanpeng; Xing, Tao

2013-12-01

With rapid economic development and energy consumption growth, China has become the largest energy consumer in the world. Impelled by extensive international concern, there is an urgent need to analyze the characteristics of energy consumption and related carbon emission, with the objective of saving energy, reducing carbon emission, and lessening environmental impact. Focusing on urban ecosystems, the biggest energy consumer, a method for estimating energy consumption and related carbon emission was established at the urban sector scale in this paper. Based on data for 1996-2010, the proposed method was applied to Beijing in a case study to analyze the consumption of different energy resources (i.e., coal, oil, gas, and electricity) and related carbon emission in different sectors (i.e., agriculture, industry, construction, transportation, household, and service sectors). The results showed that coal and oil contributed most to energy consumption and carbon emission among different energy resources during the study period, while the industrial sector consumed the most energy and emitted the most carbon among different sectors. Suggestions were put forward for energy conservation and emission reduction in Beijing. The analysis of energy consumption and related carbon emission at the sector scale is helpful for practical energy saving and emission reduction in urban ecosystems.

75 FR 66008 - Fossil Fuel-Generated Energy Consumption Reduction for New Federal Buildings and Major...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-27

... Fossil Fuel-Generated Energy Consumption Reduction for New Federal Buildings and Major Renovations of Federal Buildings; Correction AGENCY: Office of Energy Efficiency and Renewable Energy, Department of... the fossil fuel- generated energy consumption [[Page 66009

Directed transport as a mechanism for protein folding in vivo.

PubMed

González-Candela, Ernesto; Romero-Rochín, Víctor

2010-01-21

We propose a model for protein folding in vivo based on a Brownian ratchet mechanism in the multidimensional energy landscape space. The device is able to produce directed transport taking advantage of the assumed intrinsic asymmetric properties of the proteins and employing the consumption of energy provided by an external source. Through such a directed transport phenomenon, the polypeptide finds the native state starting from any initial state in the energy landscape with great efficacy and robustness, even in the presence of different types of obstacles. This model solves Levinthal's paradox without requiring biased transition probabilities but at the expense of opening the system to an external field.

Energy consumption: Past, present, future

NASA Technical Reports Server (NTRS)

1973-01-01

The energy consumption history of the United States and the changes which could occur in consumption characteristics in the next 50 years are presented. The various sources of energy are analyzed to show the limitations involved in development and utilization as a function of time available. Several scenarios were prepared to show the consumption and supply of energy under varying conditions.

The Increase of Energy Consumption and Carbon Dioxide (CO2) Emission in Indonesia

NASA Astrophysics Data System (ADS)

Sasana, Hadi; Putri, Annisa Eka

2018-02-01

In the last decade, the increase of energy consumption that has multiplied carbondioxide emissions becomes world problems, especially in the developing countries undergoing industrialization to be developed ones like Indonesia. This aim of this study was to analyze the effect of fossil energy consumption, population growth, and consumption of renewable energy on carbon dioxide emission. The method used was multiple linear regression analysis with Ordinary Least Square approach using time series in the period of 1990 - 2014. The result showed that fossil energy consumption and population growth have a positive influence on carbon dioxide emission in Indonesia. Meanwhile, the consumption variable of renewable energy has a negative effect on the level of carbon dioxide emissions produced.

Data Center Energy Efficiency Standards in India: Preliminary Findings from Global Practices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raje, Sanyukta; Maan, Hermant; Ganguly, Suprotim

Global data center energy consumption is growing rapidly. In India, information technology industry growth, fossil-fuel generation, and rising energy prices add significant operational costs and carbon emissions from energy-intensive data centers. Adoption of energy-efficient practices can improve the global competitiveness and sustainability of data centers in India. Previous studies have concluded that advancement of energy efficiency standards through policy and regulatory mechanisms is the fastest path to accelerate the adoption of energy-efficient practices in the Indian data centers. In this study, we reviewed data center energy efficiency practices in the United States, Europe, and Asia. Using evaluation metrics, we identifiedmore » an initial set of energy efficiency standards applicable to the Indian context using the existing policy mechanisms. These preliminary findings support next steps to recommend energy efficiency standards and inform policy makers on strategies to adopt energy-efficient technologies and practices in Indian data centers.« less

Relation Decomposing between Urbanization and Consumption of Water-Energy Sources

NASA Astrophysics Data System (ADS)

Wang, Y.; Xiao, W.; Wang, Y.; Zhao, Y.; Wang, J., , Dr; Jiang, D.; Wang, H.

2017-12-01

Abstract: Water resources and energy, important subsystems of city, are the basic guarantee for the normal operation of city, which play an important role to brace the urbanization. The interdependence between them are increasing along with the rapid development of China's economy. The relationship between urbanization and consumption of energy and water have become the focal point of the scholars, but the research have more attention to the impact of urbanization on two subsystems separately, and do not reveal the effects of urbanization on the water-energy nexus. Thus, there is little consideration upon the different characteristics of China's several regions in water and energy consumption in urbanization. In this paper, the STIRPAT model is built to reveal the relationship between urbanization and the consumption of water and energy. Also, the influence of urbanization on different main body of water and energy consumption are discussed. The different regional main factors of water and energy in the process of urbanization are identified through water and energy panel data of China's thirty provinces. Finally, through the regression analysis of total water consumption data of agriculture, industry, service industry with total energy consumption data, the relationship of water and energy in the process of urban development are analyzed.

10 CFR Appendix O to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Vented Home Heating Equipment

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Uniform Test Method for Measuring the Energy Consumption..., App. O Appendix O to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of... mode energy consumption, (i.e., sections 3.7 and 4.7 of this appendix) need not be performed to...

Influences Energy Consumption has on Green GDP Growth in China

NASA Astrophysics Data System (ADS)

Hongxian, Xie

2018-02-01

This paper examines the relationship between China’s total energy consumption growth and GGDP growth based on the data of 1997-2016. With path analysis employed, the direct and indirect influence on GGDP growth rate exerted by several energy consumption ratios as well as the relationship among them is explored. Furtherly, the author determines how much each of these ratios contributes to GGDP. This research suggests that proportion of natural gas consumption and that of other energy consumption are the two major drivers of GGDP growth, while coal and oil consumption proportion inhibits GGDP Growth. Specifically, increasing the proportion of natural gas consumption contributes the most to GGDP growth.

An Analysis of energy consumption and economic growth of Cobb-Douglas production function based on ECM

NASA Astrophysics Data System (ADS)

Guo, Wei-wei

2018-02-01

Energy is one of the important factors affecting economic growth, the motive force of the economic development of countries in the world, essential for the world economic development and people’s living material resources, an important resource of the relationship between the national economies. The paper sums up the evaluation and literatures on energy consumption and economic growth at home and abroad, thinks “southern talk” as the energy consumption and economic growth in the time division, makes a series of empirical tests on the relationship between total energy consumption and economic growth in China from 1978 to 1991 and from 1992 to 2016.The results show that total energy consumption is a one-way causal relationship between economic growths in china, Economic growth has a strong dependence on energy, there is a co-integration relationship between energy consumption and economic growth. However, economic growth depends on the energy consumption decreased year by year in China, The way of economic growth is changing from the extensive economic growth mode to intensive mode of economic growth.

Territorial approach to increased energy consumption of water extraction from depletion of a highlands Mexican aquifer.

PubMed

Fonseca, Carlos Roberto; Esteller, María Vicenta; Díaz-Delgado, Carlos

2013-10-15

This work proposes a method to estimate increased energy consumption of pumping caused by a drawdown of groundwater level and the equivalent energy consumption of the motor-pump system in an aquifer under intensive exploitation. This method has been applied to the Valley of Toluca aquifer, located in the Mexican highlands, whose intensive exploitation is reflected in a decline in the groundwater level of between 0.10 and 1.6 m/year. Results provide a summary of energy consumption and a map of energy consumption isopleths showing the areas that are most susceptible to increases in energy consumption due to pumping. The proposed method can be used to estimate the effect of the intensive exploitation of the Valley of Toluca aquifer on the energy consumption of groundwater extraction. Finding reveals that, for the year 2006, groundwater extraction in the urban zone required 2.39 times more energy than the conditions observed 38 years earlier. In monetary terms, this reflects an increase of USD$ 3 million annually, according to 2005 energy production costs. Copyright © 2013 Elsevier Ltd. All rights reserved.

Power-Efficient Beacon Recognition Method Based on Periodic Wake-Up for Industrial Wireless Devices

PubMed Central

Lee, Donghun; Jang, Ingook; Choi, Jinchul; Son, Youngsung

2018-01-01

Energy harvester-integrated wireless devices are attractive for generating semi-permanent power from wasted energy in industrial environments. The energy-harvesting wireless devices may have difficulty in their communication with access points due to insufficient power supply for beacon recognition during network initialization. In this manuscript, we propose a novel method of beacon recognition based on wake-up control to reduce instantaneous power consumption in the initialization procedure. The proposed method applies a moving window for the periodic wake-up of the wireless devices. For unsynchronized wireless devices, beacons are always located in the same positions within each beacon interval even though the starting offsets are unknown. Using these characteristics, the moving window checks the existence of the beacon associated withspecified resources in a beacon interval, checks again for neighboring resources at the next beacon interval, and so on. This method can reduce instantaneous power and generates a surplus of charging time. Thus, the proposed method alleviates the problems of power insufficiency in the network initialization. The feasibility of the proposed method is evaluated using computer simulations of power shortage in various energy-harvesting conditions. PMID:29673206

Is the Consumption of Energy Drinks Associated With Academic Achievement Among College Students?

PubMed

Champlin, Sara E; Pasch, Keryn E; Perry, Cheryl L

2016-08-01

Despite widely reported side effects, use of energy drinks has increased among college students, who report that they consume energy drinks to help them complete schoolwork. However, little is known about the association between energy drink use and academic performance. We explored the relationship between energy drink consumption and current academic grade point average (GPA) among first-year undergraduate students. Participants included 844 first-year undergraduates (58.1 % female; 50.7 % White). Students reported their health behaviors via an online survey. We measured energy drink consumption with two measures: past month consumption by number of drinks usually consumed in 1 month and number consumed during the last occasion of consumption. We used multiple linear regression modeling with energy drink consumption and current GPA, controlling for gender, race, weekend and weekday sleep duration, perceived stress, perceived stress management, media use, and past month alcohol use. We found that past month energy drink consumption quantity by frequency (p < 0.001), and energy drinks consumed during the last occasion (p < 0.001), were associated with a lower GPA. Energy drinks consumed during the last occasion of consumption (p = 0.01) remained significantly associated with a lower GPA when controlling for alcohol use. While students report using energy drinks for school-related reasons, our findings suggest that greater energy drink consumption is associated with a lower GPA, even after controlling for potential confounding variables. Longitudinal research is needed that addresses whether GPA declines after continued use of energy drinks or if students struggling academically turn to energy drinks to manage their schoolwork.

Energy Modeling of IoT Mobile Terminals on WiFi Environmental Impacts †.

PubMed

Sun, Yuxia; Chen, Junxian; Tang, Yong; Chen, Yanjia

2018-05-28

With the popularity of various IoT mobile terminals such as mobile phones and sensors, the energy problems of IoT mobile terminals have attracted increasingly more attention. In this paper, we explore the impacts of some important factors of WiFi environments on the energy consumption of mobile phones, which are typical IoT end devices. The factors involve the WiFi signal strength under good signal conditions, the type and the amount of protocol packets that are initiated by WiFi APs (Access Points) to maintain basic network communication with the phones. Controlled experiments are conducted to quantitatively study the phone energy impacts by the above WiFi environmental factors. To describe such impacts, we construct a time-based signal strength-aware energy model and packet type/amount-aware energy models. The models constructed in the paper corroborate the following user experience on phone energy consumption: (1) a phone's energy is drawn faster under higher WiFi signal strengths than under lower ones even in normal signal conditions; (2) phones consume energy faster in a public WiFi network than in a private one even in the basic phone state. The energy modeling methods proposed in the paper enable ordinary developers to analyze phone energy draw conveniently by utilizing inexpensive power meters as measurement tools. The modeling methods are general and are able to be used for phones of any type and any platform.

The Effects of Domestic Energy Consumption on Urban Development Using System Dynamics

NASA Astrophysics Data System (ADS)

Saryazdi, M. D.; Homaei, N.; Arjmand, A.

2018-05-01

In developed countries, people have learned to follow efficient consumption patterns, while in developing countries, such as Iran, these patterns are not well executed. A large amount of energy is almost consumed in buildings and houses and though the consumption patterns varies in different societies, various energy policies are required to meet the consumption challenges. So far, several papers and more than ten case studies have worked on the relationship between domestic energy consumption and urban development, however these researches did not analyzed the impact of energy consumption on urban development. Therefore, this paper attempts to examine the interactions between the energy consumption and urban development by using system dynamics as the most widely used methods for complex problems. The proposed approach demonstrates the interactions using causal loop and flow diagrams and finally, suitable strategies will be proposed for urban development through simulations of different scenarios.

Comparison and Evolution of Energy Consumption in Moroccan Agro-food Industries

NASA Astrophysics Data System (ADS)

El Badaoui, Meryem; Touzani, Abdellatif

2017-06-01

The aim of this article is to establish a comparison between the Moroccan energy consumption and the BREF the reference document on best available techniques in the food industries, then an evolution of this consumption by 2030 in order to better understand it and to define strategies to reduce energy bill. According to a survey conducted among 5000 Moroccan companies, we were able to compare the energy consumption of the agro-food industries including sugar industry, dairy industry, cereal industry; fatty substances industry and fishing industry with that of the BREF. Also an evolution of Moroccan consumption was established by 2030 using the linear regression method, and then calculated a non-negligible average annual growth rate (AAGR). The results show that the Moroccan energy consumption is adequate to that of the BREF, and an energy consumption constantly increasing by registering a non-negligible AAGR.

Drivers of U.S. Household Energy Consumption, 1980-2009

EIA Publications

2015-01-01

In 2012, the residential sector accounted for 21% of total primary energy consumption and about 20% of carbon dioxide emissions in the United States (computed from EIA 2013). Because of the impacts of residential sector energy use on the environment and the economy, this study was undertaken to help provide a better understanding of the factors affecting energy consumption in this sector. The analysis is based on the U.S. Energy Information Administration's (EIA) residential energy consumption surveys (RECS) 1980-2009.

Global Transportation Energy Consumption Examination of Scenarios to 2040 using ITEDD

EIA Publications

2017-01-01

Energy consumption in the transportation sector is evolving. Over the next 25 years, the U.S. Energy Information Administration’s (EIA) International Energy Outlook (IEO) 2016 Reference case projects that Organization for Economic Cooperation and Development (OECD) countries’ transportation energy consumption will remain relatively flat. In contrast, non-OECD countries will grow to levels higher than in OECD countries by the early 2020s. This rapid non-OECD growth results in continued transportation energy consumption growth through at least 2040.

Final Nellis Air Force Base Capital Improvements Program Environmental Assessment

DTIC Science & Technology

2013-08-01

USCB United States Census Bureau USFWS United States Fish and Wildlife Service VOC Volatile Organic Compound WINDO Wing Infrastructure and...desert tortoise, consultation with the United States (U.S.) Fish and Wildlife Service would be initiated. Consultation with the U.S. Army Corps of...and decrease energy consumption on military installations. The projects described in the CIP are derived from the Base Comprehensive Asset Management

Nellis Air Force Base Capital Improvements Program Environmental Assessment

DTIC Science & Technology

2013-08-01

Air Force Warfare Center USC United States Code USCB United States Census Bureau USFWS United States Fish and Wildlife Service VOC Volatile...project arise with the potential to affect desert tortoise, consultation with the United States (U.S.) Fish and Wildlife Service would be initiated...Environmental Design (LEED) facilities and decrease energy consumption on military installations. The projects described in the CIP are derived

Measuring and managing the environmental cost of coffee production in Latin America

Treesearch

Victor Chavez Arce; Raul Raudales; Rich Trubey; David I. King; Richard B. Chandler; Carlin C. Chandler

2009-01-01

Coffee is a major international commodity, and because of this, coffee production has the potential for considerable global impacts on the environment. These impacts can include the consumption of energy, water, land and the loss of native forest. Here we quantify these costs using Costa Rica as a case study, and describe an initiative undertaken at the Montes de Oro...

Input-output modeling for urban energy consumption in Beijing: dynamics and comparison.

PubMed

Zhang, Lixiao; Hu, Qiuhong; Zhang, Fan

2014-01-01

Input-output analysis has been proven to be a powerful instrument for estimating embodied (direct plus indirect) energy usage through economic sectors. Using 9 economic input-output tables of years 1987, 1990, 1992, 1995, 1997, 2000, 2002, 2005, and 2007, this paper analyzes energy flows for the entire city of Beijing and its 30 economic sectors, respectively. Results show that the embodied energy consumption of Beijing increased from 38.85 million tonnes of coal equivalent (Mtce) to 206.2 Mtce over the past twenty years of rapid urbanization; the share of indirect energy consumption in total energy consumption increased from 48% to 76%, suggesting the transition of Beijing from a production-based and manufacturing-dominated economy to a consumption-based and service-dominated economy. Real estate development has shown to be a major driving factor of the growth in indirect energy consumption. The boom and bust of construction activities have been strongly correlated with the increase and decrease of system-side indirect energy consumption. Traditional heavy industries remain the most energy-intensive sectors in the economy. However, the transportation and service sectors have contributed most to the rapid increase in overall energy consumption. The analyses in this paper demonstrate that a system-wide approach such as that based on input-output model can be a useful tool for robust energy policy making.

Input-Output Modeling for Urban Energy Consumption in Beijing: Dynamics and Comparison

PubMed Central

Zhang, Lixiao; Hu, Qiuhong; Zhang, Fan

2014-01-01

Input-output analysis has been proven to be a powerful instrument for estimating embodied (direct plus indirect) energy usage through economic sectors. Using 9 economic input-output tables of years 1987, 1990, 1992, 1995, 1997, 2000, 2002, 2005, and 2007, this paper analyzes energy flows for the entire city of Beijing and its 30 economic sectors, respectively. Results show that the embodied energy consumption of Beijing increased from 38.85 million tonnes of coal equivalent (Mtce) to 206.2 Mtce over the past twenty years of rapid urbanization; the share of indirect energy consumption in total energy consumption increased from 48% to 76%, suggesting the transition of Beijing from a production-based and manufacturing-dominated economy to a consumption-based and service-dominated economy. Real estate development has shown to be a major driving factor of the growth in indirect energy consumption. The boom and bust of construction activities have been strongly correlated with the increase and decrease of system-side indirect energy consumption. Traditional heavy industries remain the most energy-intensive sectors in the economy. However, the transportation and service sectors have contributed most to the rapid increase in overall energy consumption. The analyses in this paper demonstrate that a system-wide approach such as that based on input-output model can be a useful tool for robust energy policy making. PMID:24595199

On-site energy consumption and selected emissions at softwood sawmills in the southwestern United States

Treesearch

Dan Loeffler; Nathaniel Anderson; Todd A. Morgan; Colin B. Sorenson

2016-01-01

Presently there is a lack of information describing US southwestern energy consumption and emissions generated from the sawmilling industry. This article uses a mail survey of softwood sawmills in the states of Arizona, Colorado, and New Mexico to develop a profile of on-site energy consumption and selected emissions for the industry. Energy consumption is...

Analyzing industrial energy use through ordinary least squares regression models

NASA Astrophysics Data System (ADS)

Golden, Allyson Katherine

Extensive research has been performed using regression analysis and calibrated simulations to create baseline energy consumption models for residential buildings and commercial institutions. However, few attempts have been made to discuss the applicability of these methodologies to establish baseline energy consumption models for industrial manufacturing facilities. In the few studies of industrial facilities, the presented linear change-point and degree-day regression analyses illustrate ideal cases. It follows that there is a need in the established literature to discuss the methodologies and to determine their applicability for establishing baseline energy consumption models of industrial manufacturing facilities. The thesis determines the effectiveness of simple inverse linear statistical regression models when establishing baseline energy consumption models for industrial manufacturing facilities. Ordinary least squares change-point and degree-day regression methods are used to create baseline energy consumption models for nine different case studies of industrial manufacturing facilities located in the southeastern United States. The influence of ambient dry-bulb temperature and production on total facility energy consumption is observed. The energy consumption behavior of industrial manufacturing facilities is only sometimes sufficiently explained by temperature, production, or a combination of the two variables. This thesis also provides methods for generating baseline energy models that are straightforward and accessible to anyone in the industrial manufacturing community. The methods outlined in this thesis may be easily replicated by anyone that possesses basic spreadsheet software and general knowledge of the relationship between energy consumption and weather, production, or other influential variables. With the help of simple inverse linear regression models, industrial manufacturing facilities may better understand their energy consumption and production behavior, and identify opportunities for energy and cost savings. This thesis study also utilizes change-point and degree-day baseline energy models to disaggregate facility annual energy consumption into separate industrial end-user categories. The baseline energy model provides a suitable and economical alternative to sub-metering individual manufacturing equipment. One case study describes the conjoined use of baseline energy models and facility information gathered during a one-day onsite visit to perform an end-point energy analysis of an injection molding facility conducted by the Alabama Industrial Assessment Center. Applying baseline regression model results to the end-point energy analysis allowed the AIAC to better approximate the annual energy consumption of the facility's HVAC system.

Energy Beverage Consumption Among Naval Aviation Candidates.

PubMed

Sather, Thomas E; Delorey, Donald R

2016-06-01

Since the debut of energy beverages, the consumption of energy beverages has been immensely popular with young adults. Research regarding energy beverage consumption has included college students, European Union residents, and U.S. Army military personnel. However, energy beverage consumption among naval aviation candidates in the United States has yet to be examined. The purpose of this study was to assess energy beverage consumption patterns (frequency and volume) among naval aviation candidates, including attitudes and perceptions regarding the benefits and safety of energy beverage consumption. A 44-item survey was used to assess energy beverage consumption patterns of 302 students enrolled in the Aviation Preflight Indoctrination Course at Naval Air Station Pensacola, FL. Results indicated that 79% of participants (N = 239) reported consuming energy beverages within the last year. However, of those who reported consuming energy beverages within the last year, only 36% (N = 85) reported consuming energy beverages within the last 30 d. Additionally, 51% (N = 153) of participants reported no regular energy beverages consumption. The majority of participants consumed energy beverages for mental alertness (67%), mental endurance (37%), and physical endurance (12%). The most reported side effects among participants included increased mental alertness (67%), increased heart rate (53%), and restlessness (41%). Naval aviation candidates appear to use energy drinks as frequently as a college student population, but less frequently than expected for an active duty military population. The findings of this study indicate that naval aviation candidates rarely use energy beverages (less than once per month), but when consumed, they use it for fatigue management.

Householders’ Mental Models of Domestic Energy Consumption: Using a Sort-And-Cluster Method to Identify Shared Concepts of Appliance Similarity

PubMed Central

Walker, Ian; Verplanken, Bas; Shaddick, Gavin

2016-01-01

If in-home displays and other interventions are to successfully influence people’s energy consumption, they need to communicate about energy in terms that make sense to users. Here we explore householders’ perceptions of energy consumption, using a novel combination of card-sorting and clustering to reveal shared patterns in the way people think about domestic energy consumption. The data suggest that, when participants were asked to group appliances which they felt naturally ‘went together’, there are relatively few shared ideas about which appliances are conceptually related. To the extent participants agreed on which appliances belonged together, these groupings were based on activities (e.g., entertainment) and location within the home (e.g., kitchen); energy consumption was not an important factor in people’s categorisations. This suggests messages about behaviour change aimed at reducing energy consumption might better be tied to social practices than to consumption itself. PMID:27467206

Energy Intensity Trends in AEO2010 (released in AEO2010)

EIA Publications

2010-01-01

Energy intensity (energy consumption per dollar of real GDP) indicates how much energy a country uses to produce its goods and services. From the early 1950s to the early 1970s, U.S. total primary energy consumption and real GDP increased at nearly the same annual rate. During that period, real oil prices remained virtually flat. In contrast, from the mid-1970s to 2008, the relationship between energy consumption and real GDP growth changed, with primary energy consumption growing at less than one-third the previous average rate and real GDP growth continuing to grow at its historical rate. The decoupling of real GDP growth from energy consumption growth led to a decline in energy intensity that averaged 2.8% per year from 1973 to 2008. In the Annual Energy Outlook 2010 Reference case, energy intensity continues to decline, at an average annual rate of 1.9% from 2008 to 2035.

Energy drink consumption is associated with unhealthy dietary behaviours among college youth.

PubMed

Poulos, Natalie S; Pasch, Keryn E

2015-11-01

Energy drink consumption has been associated with a variety of health risk behaviours, yet little research has explored the relationship between energy drinks and dietary behaviours of emerging adults. Therefore, the purpose of this study was to explore the relationship between energy drink consumption and dietary behaviours among energy drink users and non-users within a sample of college youth. College freshmen (n = 585, m age = 18.7 years; 47% non-Hispanic White, 20.9% Hispanic, 25.5% Asian, 2.7% non-Hispanic Black and 4.4% other; 56% female), at a large, southwest university self-reported their energy drink consumption in the past week and a variety of dietary behaviours, including past week soda, diet soda, pre-packaged salty snacks, pre-packaged sweet snacks, fast food, restaurant food, frozen food, fruits, vegetables, milk and breakfast consumption. Linear regression analyses were run to determine associations between energy drink consumption and dietary behaviour among users and non-users of energy drinks. Analyses controlled for gender, race/ethnicity and body mass index (BMI). Overall, 17.5% of students had consumed energy drinks in the past week. Energy drink users were more likely to be male, White and have a greater BMI. Students also reported low past week intake of fruits, vegetables, milk and breakfast. Past week energy drink consumption was associated with increased soda and frozen meal consumption. Given a rapidly expanding energy drink market, future dietary interventions among college youth may want to consider the implications of energy drinks, as results of this study suggest consumption of these beverages is associated with unhealthy dietary behaviours and a greater BMI. © Royal Society for Public Health 2015.

10 CFR 431.204 - Uniform test method for the measurement of energy consumption of illuminated exit signs.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Uniform test method for the measurement of energy consumption of illuminated exit signs. 431.204 Section 431.204 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION... Procedures § 431.204 Uniform test method for the measurement of energy consumption of illuminated exit signs...

Energy Security Strategies: An Analysis of Tanzania and Mozambique

DTIC Science & Technology

2016-06-01

prioritizes domestic consumption or export of energy resources. The strategy a government chooses affects the overall energy security of that country...This thesis seeks to explain why countries pursue energy strategies that focus on domestic consumption of indigenous energy resources instead of...energy strategy that either prioritizes domestic consumption or export of energy resources. The strategy a government chooses affects the overall

Study on energy consumption evaluation of mountainous highway based on LCA

NASA Astrophysics Data System (ADS)

Fei, Lunlin; Zhang, Qi; Xie, Yongqing

2017-06-01

For the system to understand the road construction energy consumption process, this paper selects a typical mountainous highway in the south, using the theory and method of Life Cycle Assessment (LCA) to quantitatively study the energy consumption of the whole process of highway raw materials production, construction and operation. The results show that the energy consumption in the raw material production stage is the highest, followed by the highway operation and construction stage. The energy consumption per unit of tunnel engineering, bridge engineering, roadbed engineering and pavement engineering in the construction phase are 2279.00 tce, 1718.07 tce, 542.19 tce and 34.02 tce, and in operational phase, 85.44% of electricity consumption comes from tunnel ventilation and lighting. Therefore, in the bridge and tunnel construction process, we should promote energy-saving innovation of the construction technology and mechanical equipment, and further strengthen the research and development of tunnel ventilation, lighting energy-saving equipment and intelligent control technology, which will help significantly reduce the energy consumption and greenhouse gas emissions of the life cycle of highway.

Bayes Node Energy Polynomial Distribution to Improve Routing in Wireless Sensor Network

PubMed Central

Palanisamy, Thirumoorthy; Krishnasamy, Karthikeyan N.

2015-01-01

Wireless Sensor Network monitor and control the physical world via large number of small, low-priced sensor nodes. Existing method on Wireless Sensor Network (WSN) presented sensed data communication through continuous data collection resulting in higher delay and energy consumption. To conquer the routing issue and reduce energy drain rate, Bayes Node Energy and Polynomial Distribution (BNEPD) technique is introduced with energy aware routing in the wireless sensor network. The Bayes Node Energy Distribution initially distributes the sensor nodes that detect an object of similar event (i.e., temperature, pressure, flow) into specific regions with the application of Bayes rule. The object detection of similar events is accomplished based on the bayes probabilities and is sent to the sink node resulting in minimizing the energy consumption. Next, the Polynomial Regression Function is applied to the target object of similar events considered for different sensors are combined. They are based on the minimum and maximum value of object events and are transferred to the sink node. Finally, the Poly Distribute algorithm effectively distributes the sensor nodes. The energy efficient routing path for each sensor nodes are created by data aggregation at the sink based on polynomial regression function which reduces the energy drain rate with minimum communication overhead. Experimental performance is evaluated using Dodgers Loop Sensor Data Set from UCI repository. Simulation results show that the proposed distribution algorithm significantly reduce the node energy drain rate and ensure fairness among different users reducing the communication overhead. PMID:26426701

Bayes Node Energy Polynomial Distribution to Improve Routing in Wireless Sensor Network.

PubMed

Palanisamy, Thirumoorthy; Krishnasamy, Karthikeyan N

2015-01-01

Wireless Sensor Network monitor and control the physical world via large number of small, low-priced sensor nodes. Existing method on Wireless Sensor Network (WSN) presented sensed data communication through continuous data collection resulting in higher delay and energy consumption. To conquer the routing issue and reduce energy drain rate, Bayes Node Energy and Polynomial Distribution (BNEPD) technique is introduced with energy aware routing in the wireless sensor network. The Bayes Node Energy Distribution initially distributes the sensor nodes that detect an object of similar event (i.e., temperature, pressure, flow) into specific regions with the application of Bayes rule. The object detection of similar events is accomplished based on the bayes probabilities and is sent to the sink node resulting in minimizing the energy consumption. Next, the Polynomial Regression Function is applied to the target object of similar events considered for different sensors are combined. They are based on the minimum and maximum value of object events and are transferred to the sink node. Finally, the Poly Distribute algorithm effectively distributes the sensor nodes. The energy efficient routing path for each sensor nodes are created by data aggregation at the sink based on polynomial regression function which reduces the energy drain rate with minimum communication overhead. Experimental performance is evaluated using Dodgers Loop Sensor Data Set from UCI repository. Simulation results show that the proposed distribution algorithm significantly reduce the node energy drain rate and ensure fairness among different users reducing the communication overhead.

Issues in International Energy Consumption Analysis: Canadian Energy Demand

EIA Publications

2015-01-01

The residential sector is one of the main end-use sectors in Canada accounting for 16.7% of total end-use site energy consumption in 2009 (computed from NRCan 2012. pp, 4-5). In this year, the residential sector accounted for 54.5% of buildings total site energy consumption. Between 1990 and 2009, Canadian household energy consumption grew by less than 11%. Nonetheless, households contributed to 14.6% of total energy-related greenhouse gas emissions in Canada in 2009 (computed from NRCan 2012). This is the U.S. Energy Information Administration’s second study to help provide a better understanding of the factors impacting residential energy consumption and intensity in North America (mainly the United States and Canada) by using similar methodology for analyses in both countries.

Household energy consumption in the United States, 1987 to 2009: Socioeconomic status, demographic composition, and energy services profiles

NASA Astrophysics Data System (ADS)

Kemp, Robert J.

This dissertation examines household energy consumption in the United States over the period of 1987 to 2009, specifically focusing on the role of socioeconomic status, demographic composition, and energy services profiles. The dissertation makes use of four cross-sections from the Residential Energy Consumption Survey data series to examine how household characteristics influence annual energy consumption overall, and by fuel type. Chapter 4 shows that household income is positively related to energy consumption, but more so for combustible fuel consumption than for electricity consumption. Additionally, results for educational attainment suggest a less cross-sectional association and more longitudinal importance as related to income. Demographic composition matters, as predicted by the literature; household size and householder age show predicted effects, but when considered together, income explains any interaction between age and household size. Combustible fuels showed a far greater relationship to housing unit size and income, whereas electricity consumption was more strongly related to educational attainment, showing important differences in the associations by fuel type. Taken together, these results suggest a life course-based model for understanding energy consumption that may be strongly linked to lifestyles. Chapter 5 extends the findings in Chapter 4 by examining the patterning of physical characteristics and behaviors within households. The chapter uses Latent Class Analysis to examine a broad set of energy significant behaviors and characteristics to discover five unique energy services profiles. These profiles are uniquely patterned across demographic and socioeconomic compositions of households and have important effects on energy consumption. These profiles are likely byproducts of the lifestyles in which the household takes part, due to factors such as their socioeconomic status and household demographic composition. Overall, the dissertation finds strong evidence for taking a more lifecycle-based approach to understanding how energy is consumed based on the combined importance of householder age, household size, and socioeconomic status. Additionally, these factors produce very different energy services profiles that I argue are indicative of the lifestyle in which a household engages. Finally, the dissertation argues that these connections are essential to understanding energy consumption and provide a fertile ground for future research.

Building and occupant characteristics as determinants of residential energy consumption

NASA Astrophysics Data System (ADS)

Nieves, L. A.; Nieves, A. L.

1981-10-01

The probable effects of building energy performance standards on energy consumption were studied. Observations of actual residential energy consumption that could affirm or disaffirm consumption estimates of the Department of Energy's 2.0A simulation model were obtained. Home owner's conservation investments and home purchase decisions were investigated. The investigation of determinants of household energy consumption is described. The underlying economic theory and its implications are given as well as a description of the data collection procedures, of the formulation of variables, and then of data analysis and findings. The assumptions and limitations of the energy use projections generated by the DOE 2.0A model are discussed. Actual electricity data for the houses are then compared with results of the simulation.

Modelling the link amongst fine-pore diffuser fouling, oxygen transfer efficiency, and aeration energy intensity.

PubMed

Garrido-Baserba, Manel; Sobhani, Reza; Asvapathanagul, Pitiporn; McCarthy, Graham W; Olson, Betty H; Odize, Victory; Al-Omari, Ahmed; Murthy, Sudhir; Nifong, Andrea; Godwin, Johnnie; Bott, Charles B; Stenstrom, Michael K; Shaw, Andrew R; Rosso, Diego

2017-03-15

This research systematically studied the behavior of aeration diffuser efficiency over time, and its relation to the energy usage per diffuser. Twelve diffusers were selected for a one year fouling study. Comprehensive aeration efficiency projections were carried out in two WRRFs with different influent rates, and the influence of operating conditions on aeration diffusers' performance was demonstrated. This study showed that the initial energy use, during the first year of operation, of those aeration diffusers located in high rate systems (with solids retention time - SRT-less than 2 days) increased more than 20% in comparison to the conventional systems (2 > SRT). Diffusers operating for three years in conventional systems presented the same fouling characteristics as those deployed in high rate processes for less than 15 months. A new procedure was developed to accurately project energy consumption on aeration diffusers; including the impacts of operation conditions, such SRT and organic loading rate, on specific aeration diffusers materials (i.e. silicone, polyurethane, EPDM, ceramic). Furthermore, it considers the microbial colonization dynamics, which successfully correlated with the increase of energy consumption (r 2 :0.82 ± 7). The presented energy model projected the energy costs and the potential savings for the diffusers after three years in operation in different operating conditions. Whereas the most efficient diffusers provided potential costs spanning from 4900 USD/Month for a small plant (20 MGD, or 74,500 m 3 /d) up to 24,500 USD/Month for a large plant (100 MGD, or 375,000 m 3 /d), other diffusers presenting less efficiency provided spans from 18,000USD/Month for a small plant to 90,000 USD/Month for large plants. The aim of this methodology is to help utilities gain more insight into process mechanisms and design better energy efficiency strategies at existing facilities to reduce energy consumption. Copyright © 2016 Elsevier Ltd. All rights reserved.

Analysis of Factors Influencing Energy Consumption at an Air Force Base.

DTIC Science & Technology

1995-12-01

include them in energy consumption projections. 28 Table 2-3 Selected Independent Variables ( Morill , 1985) Dependent Variable Energy Conservation...most appropriate method for forecasting energy consumption (Weck, 1981; Tinsley, 1981; and Morill , 1985). This section will present a brief

Energy consumption and CO{sub 2} emissions in Iran, 2025

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mirzaei, Maryam

Climate change and global warming as the key human societies' threats are essentially associated with energy consumption and CO{sub 2} emissions. A system dynamic model was developed in this study to model the energy consumption and CO{sub 2} emission trends for Iran over 2000–2025. Energy policy factors are considered in analyzing the impact of different energy consumption factors on environmental quality. The simulation results show that the total energy consumption is predicted to reach 2150 by 2025, while that value in 2010 is 1910, which increased by 4.3% yearly. Accordingly, the total CO{sub 2} emissions in 2025 will reach 985more » million tonnes, which shows about 5% increase yearly. Furthermore, we constructed policy scenarios based on energy intensity reduction. The analysis show that CO{sub 2} emissions will decrease by 12.14% in 2025 compared to 2010 in the scenario of 5% energy intensity reduction, and 17.8% in the 10% energy intensity reduction scenario. The results obtained in this study provide substantial awareness regarding Irans future energy and CO{sub 2} emission outlines. - Highlights: • Creation of an energy consumption model using system dynamics. • The effect of different policies on energy consumption and emission reductions. • An ascending trend for the environmental costs caused by CO{sub 2} emissions is observed. • An urgent need for energy saving and emission reductions in Iran.« less

Energy Consumption Database

Science.gov Websites

Consumption Database The California Energy Commission has created this on-line database for informal reporting ) classifications. The database also provides easy downloading of energy consumption data into Microsoft Excel (XLSX

Adolescent Energy Drink Use Related to Intake of Fried and High-sugar Foods.

PubMed

Williams, Ronald D; Odum, Mary; Housman, Jeff M

2017-07-01

We assessed the relationship between energy drinks, fried food, and high-sugar food consumption. Secondary analyses including Mann-Whitney U, Cohen's d and effect sizes were used to examine 7-day intakes of energy drinks, fried foods, and high-sugar foods among teenagers (N = 1570) who participated in the 2014 FLASHE Study. Energy drink consumption during the past 7 days was reported by 14.4% (N = 226) of participants. Those who reported consumption of energy drinks in the past 7 days were more likely to eat various fried and high-sugar foods than those who did not report past 7-day energy drink consumption. These foods include candy (p < .001), cake (p = .011), desserts (p < .001), sugary cereal (p < .001), fried potatoes (p < .001), fried chicken (p < .001), and chips (p < .001). Energy drink consumption among adolescents may be linked to other high-risk nutrition intake behaviors, specifically increased consumption of fried and high-sugar foods. This study adds to the growing number of recent studies highlighting the multiple behavioral risks associated with early energy drink use. Health promotion and nutrition education efforts should focus on delaying early consumption of energy drinks among adolescents.

Effects of snack consumption for 8 weeks on energy intake and body weight.

PubMed

Viskaal-van Dongen, M; Kok, F J; de Graaf, C

2010-02-01

Consumption of snacks might contribute to the obesity epidemic. It is not clear how the moment of consumption and energy density of snacks can influence the compensatory response to consumption of snacks in the long term. To investigate the effects of snack consumption for 8 weeks on changes in body weight, emphasizing on moment of consumption and energy density. In total, 16 men and 66 women (mean age 21.9 years (s.d. 0.3 year), mean body mass index 20.7 kg m(-2) (s.d. 0.2 kg m(-2))) were randomly assigned to one of four parallel groups in a 2 x 2 design: snacks consumed with or between meals and snacks having a low (<4 kJ g(-1)) or high (>12 kJ g(-1)) energy density. For 8 weeks, subjects consumed mandatory snacks that provided 25% of energy requirements on each day. Body weight, body composition, physical activity level (PAL) and energy intake were measured in week 1 and week 8. There were no differences in changes in body weight between the four groups. Moment of consumption (P=0.7), energy density (P=0.8) and interaction (P=0.09) did not influence body weight. Similarly, there were no differences in changes in body composition, PAL and energy intake between the four groups. Body weight after 8 weeks of snack consumption was not affected by moment of consumption and energy density of snacks. This finding suggests that consuming snacks that are high or low in energy density does not necessarily contribute to weight gain. Healthy, nonobese young adults may be able to maintain a normal body weight through an accurate compensation for the consumption of snacks.

Association between Plain Water and Sugar-Sweetened Beverages and Total Energy Intake among Mexican School-Age Children.

PubMed

Shamah-Levy, Teresa; García-Chávez, Claudia Gabriela; Rodríguez-Ramírez, Sonia

2016-12-18

Water consumption promotes a decrease in total diet energy intake, and one explanation for this fact is the replacement of sugar-sweetened beverages (SSBs) by plain water (PW). The objective of this study was to analyze the association between SSB and PW consumption as a part of the total energy intake. Dietary information was obtained by one 24 h recall of 2536 school-age children who participated in the National Nutrition Survey in Mexico. PW and SSB consumption was measured in mL and servings (240 mL), and consumption was stratified into two levels (<2 and ≥2 servings/day). Linear regression models were used to evaluate the association between PW and SSB consumption in relation to total energy intake. Models were adjusted for age, sex, the proportion of energy obtained from non-beverage food, area of residence, and socioeconomic status (based on information regarding housing conditions and ownership of home appliances). PW consumption at the national level was two servings/day, and was not associated with total energy intake. However, the combination of the high consumption of PW and the low consumption of SSB was associated with less total energy intake ( p < 0.05). Promoting higher PW and lower SSB consumption provides a useful public health strategy for reducing total energy intake and preventing overconsumption among Mexican school-age children.

16 CFR 305.5 - Determinations of estimated annual energy consumption, estimated annual operating cost, and...

Code of Federal Regulations, 2010 CFR

2010-01-01

... consumption, estimated annual operating cost, and energy efficiency rating, and of water use rate. 305.5... energy efficiency rating, and of water use rate. (a) Procedures for determining the estimated annual energy consumption, the estimated annual operating costs, the energy efficiency ratings, and the efficacy...

Associations between energy drink consumption and alcohol use behaviors among college students.

PubMed

Velazquez, Cayley E; Poulos, Natalie S; Latimer, Lara A; Pasch, Keryn E

2012-06-01

To explore associations between energy drink consumption and alcohol use among college students. Participants included 585 students (m age=18.7; 47.0% White, 21% Hispanic, 25% Asian, 7% other race/ethnicity; 56.0% female). Energy drink behaviors included past month and past week consumption. Alcohol use behaviors included past month and past two week consumption, as well as heavy drinking and quantity of alcohol consumed. Consumption of energy drinks mixed with alcohol was also measured. Linear and logistic regression analyses between energy drink consumption and alcohol use were run controlling for gender, age, and race/ethnicity. For each one unit increase in past month (i.e., additional day used) energy drink use, the likelihood of past month alcohol use increased by 80%, heavy drinking by 80% and past month energy drinks mixed with alcohol use by 90%. Similar results were found for past week energy drink use. A positive relationship between energy drink use and quantity of alcohol consumed during a single episode of drinking was also found (p<0.001). Significant gender interactions between energy drink consumption and alcohol use as well as quantity of alcohol consumed were found, with relationships stronger among males than females. There were no significant interactions by race/ethnicity. Energy drinks are readily available to students and pose potential health risks. Students who report greater energy drink consumption also consume more alcohol, are more likely to mix energy drinks and alcohol, and experience heavy episodes of drinking, which is problematic given the potential negative consequences of these drinks. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Clean Cities: Building Partnerships to Reduce Petroleum Use in Transportation (Brochure)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2012-03-01

This fact sheet provides an overview of the U.S. Department of Energy's Clean Cities program, which builds partnerships to reduce petroleum use in transportation in communities across the country. The U.S. Department of Energy's Clean Cities initiative advances the nation's economic, environmental, and energy security by supporting local actions to reduce petroleum consumption in transportation. Clean Cities accomplishes this work through the activities of nearly 100 local coalitions. These coalitions provide resources and technical assistance in the deployment of alternative and renewable fuels, idle-reduction measures, fuel economy improvements, and new transportation technologies, as they emerge. Clean Cities overarching goal ismore » to reduce U.S. petroleum use by 2.5 billion gallons per year by 2020. To achieve this goal, Clean Cities employs three strategies: (1) Replace petroleum with alternative and renewable fuels, including natural gas, propane, electricity, ethanol, biodiesel, and hydrogen; (2) Reduce petroleum consumption through smarter driving practices and fuel economy improvements; and (3) Eliminate petroleum use through idle reduction and other fuel-saving technologies and practices.« less

Petrobras eyes LNG project in Amazon region

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-08-07

The Brazilian state oil company has proved gas reserves in the Rio Urucu area of the Amazon jungle totaling 1.84 tcf. That compares with 3.08 tcf contained in the offshore Campos basin, source of most of Brazil`s oil and gas production. The environmentally sensitive Urucu region is one of the most dense, remote jungles in the world. Because of environmental concerns about pipelines in the rain forest and a government emphasis on boosting the natural gas share of Brazil`s energy mix, a small liquefied natural gas project is shaping up as the best option for developing and marketing Urucu gas.more » The amazon campaign underscores a government initiative to boost Brazilian consumption of natural gas. In Brazil natural gas accounts for only 4% of primary energy consumption. Some years ago, the government set an official goal of boosting the gas share of the primary energy mix to 10% by 2000. The paper discusses current drilling activities, gas production and processing, the logistics of the upper Amazon, and gas markets.« less

76 FR 58345 - Energy Conservation Program: Test Procedures for Residential Dishwashers, Dehumidifiers, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-20

...Where appropriate, the U.S. Department of Energy (DOE) has proposed to amend its test procedures for residential dishwashers, dehumidifiers, and conventional cooking products (which includes cooktops, ovens, and ranges) to include provisions for measuring standby mode and off mode energy consumption, as required by the Energy Independence and Security Act of 2007 (EISA 2007). These test procedure amendments would incorporate by reference certain provisions of the International Electrotechnical Commission (IEC) Standard 62301, ``Household electrical appliances--Measurement of standby power.'' Since publication of DOE's initial proposal in December 2010, the IEC has replaced the First Edition of this standard with the current Second Edition. This supplemental notice of proposed rulemaking proposes to incorporate the latest edition of IEC Standard 62301.

Energy drink consumption among New Zealand adolescents: Associations with mental health, health risk behaviours and body size.

PubMed

Utter, Jennifer; Denny, Simon; Teevale, Tasileta; Sheridan, Janie

2018-03-01

With the increase in popularity of energy drinks come multiple concerns about the associated health indicators of young people. The current study aims to describe the frequency of consumption of energy drinks in a nationally representative sample of adolescents and to explore the relationship between energy drink consumption and health risk behaviours, body size and mental health. Data were collected as part of Youth'12, a nationally representative survey of high school students in New Zealand (2012). In total, 8500 students answered a comprehensive questionnaire about their health and well-being, including multiple measures of mental well-being, and were weighed and measured for height. More than one-third (35%) of young people consumed energy drinks in the past week, and 12% consumed energy drinks four or more times in the past week. Energy drink consumption was significantly associated with greater depressive symptoms, greater emotional difficulties and lower general subjective well-being. Frequent energy drink consumption was also associated with binge drinking, smoking, engagement in unsafe sex, violent behaviours, risky motor vehicle use and disordered eating behaviours. There was no association between consumption of energy drinks and student body size. Consumption of energy drinks is associated with a range of health risk behaviours for young people. Strategies to limit consumption of energy drinks by young people are warranted. © 2017 Paediatrics and Child Health Division (The Royal Australasian College of Physicians).

The Commercial Energy Consumer: About Whom Are We Speaking?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Payne, Christopher

2006-05-12

Who are commercial sector customers, and how do they make decisions about energy consumption and energy efficiency investment? The energy policy field has not done a thorough job of describing energy consumption in the commercial sector. First, the discussion of the commercial sector itself is dominated by discussion of large businesses/buildings. Second, discussion of this portion of the commercial sectors consumption behavior is driven primarily by theory, with very little field data collected on the way commercial sector decision-makers describe their own options, choices, and reasons for taking action. These limitations artificially constrain energy policy options. This paper reviews themore » extant literature on commercial sector energy consumption behavior and identifies gaps in our knowledge. In particular, it argues that the primary energy policy model of commercial sector energy consumption is a top-down model that uses macro-level investment data to make conclusions about commercial behavior. Missing from the discussion is a model of consumption behavior that builds up to a theoretical framework informed by the micro-level data provided by commercial decision-makers themselves. Such a bottom-up model could enhance the effectiveness of commercial sector energy policy. In particular, translation of some behavioral models from the residential sector to the commercial sector may offer new opportunities for policies to change commercial energy consumption behavior. Utility bill consumption feedback is considered as one example of a policy option that may be applicable to both the residential and small commercial sector.« less

Determinants of residential electricity consumption: Using smart meter data to examine the effect of climate, building characteristics, appliance stock, and occupants' behavior

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kavousian, A; Rajagopal, R; Fischer, M

2013-06-15

We propose a method to examine structural and behavioral determinants of residential electricity consumption, by developing separate models for daily maximum (peak) and minimum (idle) consumption. We apply our method on a data set of 1628 households' electricity consumption. The results show that weather, location and floor area are among the most important determinants of residential electricity consumption. In addition to these variables, number of refrigerators and entertainment devices (e.g., VCRs) are among the most important determinants of daily minimum consumption, while number of occupants and high-consumption appliances such as electric water heaters are the most significant determinants of dailymore » maximum consumption. Installing double-pane windows and energy-efficient lights helped to reduce consumption, as did the energy-conscious use of electric heater. Acknowledging climate change as a motivation to save energy showed correlation with lower electricity consumption. Households with individuals over 55 or between 19 and 35 years old recorded lower electricity consumption, while pet owners showed higher consumption. Contrary to some previous studies, we observed no significant correlation between electricity consumption and income level, home ownership, or building age. Some otherwise energy-efficient features such as energy-efficient appliances, programmable thermostats, and insulation were correlated with slight increase in electricity consumption. (C) 2013 Elsevier Ltd. All rights reserved.« less

10 CFR 490.804 - Eligible reductions in petroleum consumption.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Eligible reductions in petroleum consumption. 490.804 Section 490.804 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ALTERNATIVE FUEL TRANSPORTATION PROGRAM Alternative Compliance § 490.804 Eligible reductions in petroleum consumption. (a) Motor vehicles...

10 CFR 490.804 - Eligible reductions in petroleum consumption.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Eligible reductions in petroleum consumption. 490.804 Section 490.804 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ALTERNATIVE FUEL TRANSPORTATION PROGRAM Alternative Compliance § 490.804 Eligible reductions in petroleum consumption. (a) Motor vehicles...

10 CFR 490.804 - Eligible reductions in petroleum consumption.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Eligible reductions in petroleum consumption. 490.804 Section 490.804 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ALTERNATIVE FUEL TRANSPORTATION PROGRAM Alternative Compliance § 490.804 Eligible reductions in petroleum consumption. (a) Motor vehicles...

10 CFR 490.804 - Eligible reductions in petroleum consumption.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Eligible reductions in petroleum consumption. 490.804 Section 490.804 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ALTERNATIVE FUEL TRANSPORTATION PROGRAM Alternative Compliance § 490.804 Eligible reductions in petroleum consumption. (a) Motor vehicles...

10 CFR 490.804 - Eligible reductions in petroleum consumption.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Eligible reductions in petroleum consumption. 490.804 Section 490.804 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ALTERNATIVE FUEL TRANSPORTATION PROGRAM Alternative Compliance § 490.804 Eligible reductions in petroleum consumption. (a) Motor vehicles...

Potential improvements in turbofan engine fuel economy

NASA Technical Reports Server (NTRS)

Hines, R. W.; Gaffin, W. O.

1976-01-01

The method developed for initial evaluation of possible performance improvements in the NASA Aircraft Energy Efficiency Program, directed toward improving the fuel economy of turbofan engines, is outlined, and results of the evaluation of 100 candidate engine modifications are presented. The study indicates that fuel consumption improvements of as much as 5% may be possible in current JT3D, JT8D, and JT9D turbofan engines. Aerodynamic, thermodynamic, material, and structural advances are expected to yield fuel consumption improvements on the order of 10 to 15% in advanced turbofan engines, with the greatest improvement stemming from significantly higher cycle pressure ratios. Higher turbine temperature and fan bypass ratios are also expected to contribute to fuel conservation.

On the Road to Transportation Efficiency (Video)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2014-03-01

Reducing emissions and oil consumption are crucial worldwide goals. Reducing transportation emissions, in particular, is key to reducing overall emissions. Electric vehicles driving on electrified roadways could be a significant part of the solution. E-roadways offer a variety of benefits: reduce petroleum consumption (electricity is used instead of gasoline), decrease vehicular operating costs (from about 12 cents per mile to 4 cents per mile), and extend the operational range of electric vehicles. Plus, e-roadway power can come from renewable sources. This animation was sponsored by the Clean Transportation Sector Initiative, and interagency effort between the U.S. Department of Transportation andmore » the U.S. Department of Energy.« less

Renewable Electricity Use by the U.S. Information and Communication Technology (ICT) Industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, John; Bird, Lori; Heeter, Jenny

The information and communication technology (ICT) sector continues to witness rapid growth and uptake of ICT equipment and services at both the national and global levels. The electricity consumption associated with this expansion is substantial, although recent adoptions of cloudcomputing services, co-location data centers, and other less energy-intensive equipment and operations have likely reduced the rate of growth in this sector. This paper is intended to aggregate existing ICT industry data and research to provide an initial look at electricity use, current and future renewable electricity acquisition, as well as serve as a benchmark for future growth and trends inmore » ICT industry renewable electricity consumption.« less

Flight trajectories with maximum tangential thrust in a central Newtonian field

NASA Astrophysics Data System (ADS)

Azizov, A. G.; Korshunova, N. A.

1983-07-01

The paper examines the two-dimensional problem of determining the optimal trajectories of a point moving with a limited per-second mass consumption in a central Newtonian field. It is shown that one of the cases in which the variational equations in the Meier formulation can be integrated in quadratures is motion with maximum tangential thrust. Trajectories corresponding to this motion are determined. By way of application, attention is given to the problem of determining the thrust which assures maximum kinetic energy for the point at the moment t = t1, corresponding to the mass consumption M0 - M1, where M0 and M1 are, respectively, the initial and final mass.

The impact of relative energy prices on industrial energy consumption in China: a consideration of inflation costs.

PubMed

He, Lingyun; Ding, Zhihua; Yin, Fang; Wu, Meng

2016-01-01

Significant effort has been exerted on the study of economic variables such as absolute energy prices to understand energy consumption and economic growth. However, this approach ignores general inflation effects, whereby the prices of baskets of goods may rise or fall at different rates from those of energy prices. Thus, it may be the relative energy price, not the absolute energy price, that has most important effects on energy consumption. To test this hypothesis, we introduce a new explanatory variable, the domestic relative energy price, which we define as "the ratio of domestic energy prices to the general price level of an economy," and we test the explanatory power of this new variable. Thus, this paper explores the relationship between relative energy prices and energy consumption in China from the perspective of inflation costs over the period from 1988 to 2012. The direct, regulatory and time-varying effects are captured using methods such as ridge regression and the state-space model. The direct impacts of relative energy prices on total energy consumption and intensity are -0.337 and -0.250, respectively; the effects of comprehensive regulation on energy consumption through the economic structure and the energy structure are -0.144 and -0.148, respectively; and the depressing and upward effects of rising and falling energy prices on energy consumption are 0.3520 and 0.3564, respectively. When economic growth and the energy price level were stable, inflation persisted; thus, rising energy prices benefitted both the economy and the environment. Our analysis is important for policy makers to establish effective energy-pricing policies that ensure both energy conservation and the stability of the pricing system.

The energy audit process for universities accommodation in Malaysia: a preliminary study

NASA Astrophysics Data System (ADS)

Dzulkefli Muhammad, Hilmi

2017-05-01

The increase of energy consumption in the Malaysian Universities has raised national concerns due to the fact that its consumption increase government fiscal budget and at the same time contributes negative impacts towards the environment. The purpose of this research is to focus on the process of energy audit conducted in the Malaysian universities and to identify the significant practice that can improve energy consumption of the selected universities. The significant criteria in energy audit may be found by comparing the energy implementation process of selected Malaysian universities through the investigation of energy consumption behavior and the number of electrical appliances, equipment, machinery and buildings activities that have an impact on energy consumption that can improve energy-efficiency in building. The Energy Efficiency Index (EEI) will be used as an indicator and combined with the suggested application of HOMER software to obtain solution and possible improvement of energy consumption during energy audit implementation. A document analysis approach will also be obtained in order to identify the best practice through the selected energy documentations. The result of this research may be used as a guideline for other universities that consume high energy in order to help improving the implementation of energy audit process in their universities.

[Early alcohol initiation and increased adult alcohol consumption: cause or indicator?].

PubMed

Geels, L M; Vink, J M; van Beek, J H D A; Willemsen, G; Bartels, M; Boomsma, D I

2013-01-01

Early alcohol initiation is strongly associated with increased alcohol consumption and alcohol abuse/dependence in adulthood. The mechanisms that underlie this association are unclear. To examine whether there is a causal link between early alcohol initiation and later alcohol consumption. Survey data were collected from twin pairs (age range 18-80) included in the Netherlands Twin Register (NTR). A discordant twin design was used to examine the origin of the link between early alcohol initiation and adult alcohol consumption. Within monozygotic pairs (82-143 pairs), twins who started drinking early were compared to their brother/sister who started drinking later, on frequency of alcohol use, weekly alcohol consumption, number of alcohol intoxications, excessive drinking, alcohol abuse/-dependence, and hazardous drinking. By drawing comparisons within monozygotic pairs, we were able to control for the effects of genes/shared environment. Additional analyses examined the effects of age, sex, and in-/exclusion of lifelong abstainers. Within monozygotic twin pairs, the twin who had started drinking early did not differ significantly from his/her brother/sister with respect to future alcohol consumption. Results were independent of age, sex, and in-/exclusion of lifelong abstainers. Early alcohol initiation did not have significant causal effects on subsequent alcohol consumption in adulthood and may be an indicator of a predisposition for alcohol consumption. Campaigns aimed at raising the minimum age for alcohol initiation will possibly have only a limited effect on adult alcohol consumption.

Energy and institution size

PubMed Central

2017-01-01

Why do institutions grow? Despite nearly a century of scientific effort, there remains little consensus on this topic. This paper offers a new approach that focuses on energy consumption. A systematic relation exists between institution size and energy consumption per capita: as energy consumption increases, institutions become larger. I hypothesize that this relation results from the interplay between technological scale and human biological limitations. I also show how a simple stochastic model can be used to link energy consumption with firm dynamics. PMID:28178339

A hybrid protection approaches for denial of service (DoS) attacks in wireless sensor networks

NASA Astrophysics Data System (ADS)

Gunasekaran, Mahalakshmi; Periakaruppan, Subathra

2017-06-01

Wireless sensor network (WSN) contains the distributed autonomous devices with the sensing capability of physical and environmental conditions. During the clustering operation, the consumption of more energy causes the draining in battery power that leads to minimum network lifetime. Hence, the WSN devices are initially operated on low-power sleep mode to maximise the lifetime. But, the attacks arrival cause the disruption in low-power operating called denial of service (DoS) attacks. The conventional intrusion detection (ID) approaches such as rule-based and anomaly-based methods effectively detect the DoS attacks. But, the energy consumption and false detection rate are more. The absence of attack information and broadcast of its impact to the other cluster head (CH) leads to easy DoS attacks arrival. This article combines the isolation and routing tables to detect the attack in the specific cluster and broadcasts the information to other CH. The intercommunication between the CHs prevents the DoS attacks effectively. In addition, the swarm-based defence approach is proposed to migrate the fault channel to normal operating channel through frequency hop approaches. The comparative analysis between the proposed table-based intrusion detection systems (IDSs) and swarm-based defence approaches with the traditional IDS regarding the parameters of transmission overhead/efficiency, energy consumption, and false positive/negative rates proves the capability of DoS prediction/prevention in WSN.

Prediction of Industrial Electric Energy Consumption in Anhui Province Based on GA-BP Neural Network

NASA Astrophysics Data System (ADS)

Zhang, Jiajing; Yin, Guodong; Ni, Youcong; Chen, Jinlan

2018-01-01

In order to improve the prediction accuracy of industrial electrical energy consumption, a prediction model of industrial electrical energy consumption was proposed based on genetic algorithm and neural network. The model use genetic algorithm to optimize the weights and thresholds of BP neural network, and the model is used to predict the energy consumption of industrial power in Anhui Province, to improve the prediction accuracy of industrial electric energy consumption in Anhui province. By comparing experiment of GA-BP prediction model and BP neural network model, the GA-BP model is more accurate with smaller number of neurons in the hidden layer.

Does energy consumption contribute to environmental pollutants? Evidence from SAARC countries.

PubMed

Akhmat, Ghulam; Zaman, Khalid; Shukui, Tan; Irfan, Danish; Khan, Muhammad Mushtaq

2014-05-01

The objective of the study is to examine the causal relationship between energy consumption and environmental pollutants in selected South Asian Association for Regional Cooperation (SAARC) countries, namely, Bangladesh, India, Nepal, Pakistan, and Srilanka, over the period of 1975-2011. The results indicate that energy consumption acts as an important driver to increase environmental pollutants in SAARC countries. Granger causality runs from energy consumption to environmental pollutants, but not vice versa, except carbon dioxide (CO2) emissions in Nepal where there exists a bidirectional causality between CO2 and energy consumption. Methane emissions in Bangladesh, Pakistan, and Srilanka and extreme temperature in India and Srilanka do not Granger cause energy consumption via both routes, which holds neutrality hypothesis. Variance decomposition analysis shows that among all the environmental indicators, CO2 in Bangladesh and Nepal exerts the largest contribution to changes in electric power consumption. Average precipitation in India, methane emissions in Pakistan, and extreme temperature in Srilanka exert the largest contribution.

Energy consumption model on WiMAX subscriber station

NASA Astrophysics Data System (ADS)

Mubarakah, N.; Suherman; Al-Hakim, M. Y.; Warman, E.

2018-02-01

Mobile communication technologies move toward miniaturization. Mobile device’s energy source relies on its battery endurance. The smaller the mobile device, it is expected the slower the battery drains. Energy consumption reduction in mobile devices has been of interest of researcher. In order to optimize energy consumption, its usage should be predictable. This paper proposes a model of predicted energy amount consumed by the WiMAX subscriber station by using regression analysis of active WiMAX states and their durations. The proposed model was assessed by using NS-2 simulation for more than a hundred thousand of recorded energy consumptions data in every WiMAX states. The assessment show a small average deviation between predicted and measured energy consumptions, about 0.18% for training data and 0.187% and 0.191% for test data.

Energy Consumption Management of Virtual Cloud Computing Platform

NASA Astrophysics Data System (ADS)

Li, Lin

2017-11-01

For energy consumption management research on virtual cloud computing platforms, energy consumption management of virtual computers and cloud computing platform should be understood deeper. Only in this way can problems faced by energy consumption management be solved. In solving problems, the key to solutions points to data centers with high energy consumption, so people are in great need to use a new scientific technique. Virtualization technology and cloud computing have become powerful tools in people’s real life, work and production because they have strong strength and many advantages. Virtualization technology and cloud computing now is in a rapid developing trend. It has very high resource utilization rate. In this way, the presence of virtualization and cloud computing technologies is very necessary in the constantly developing information age. This paper has summarized, explained and further analyzed energy consumption management questions of the virtual cloud computing platform. It eventually gives people a clearer understanding of energy consumption management of virtual cloud computing platform and brings more help to various aspects of people’s live, work and son on.

Is more always better? The nonlinear relationship between energy consumption and wellbeing

NASA Astrophysics Data System (ADS)

Vaughan Winfrey, Elise Marie

Policymakers today face rapidly expanding world populations, increasing evidence of environmental degradation and climate change, and mounting economic crises. In this context, they are grappling with the challenge of balancing environmental concerns, economic viability, and the wellbeing of their citizens. Because energy consumption has both positive and negative wellbeing implications, it is unclear whether societal goals to raise standards of living through energy-intensive lifestyles conflict with the social, economic, environmental, and health dimensions of broader wellbeing aspirations. Though there has been a significant amount of research on the long-run environmental consequences of increasing aggregate world energy demand, there is a lack of direct evidence on the relationship between energy consumption and wellbeing. This paper attempts to improve our understanding of the net wellbeing consequences of energy consumption. Specifically, it examines whether there is a nonlinear relationship between per capita energy consumption, as measured alternatively by CO2 emissions (metric tons per capita), electricity consumption (kWh per capita), and total energy consumption (kg of oil equivalent per capita), and wellbeing, as measured by individual life satisfaction aggregated at the country level. Panel and cross-sectional regression analyses are conducted using data from the Gallup World Poll (GWP), integrated European and World Values Surveys (WVS-EVS), and the World Bank DataBank (WBDB). Despite the classic economic assumption that more is always better, this analysis indicates that increasing energy consumption is not always associated with wellbeing improvements. The empirical results provide some suggestive evidence that life satisfaction gains associated with energy consumption may eventually be counterbalanced by the related human and environmental costs. This is valuable information for policymakers trying to balance environmental, energy-security, and citizen-wellbeing concerns.

The impact of state energy programs and other contextual factors on U.S. buildings energy consumption

NASA Astrophysics Data System (ADS)

Ofori-Boadu, Andrea N. Y. A.

High energy consumption in the United States has been influenced by populations, climates, income and other contextual factors. In the past decades, U.S. energy policies have pursued energy efficiency as a national strategy for reducing U.S. environmental degradation and dependence on foreign oils. The quest for improved energy efficiency has led to the development of energy efficient technologies and programs. The implementation of energy programs in the complex U.S. socio-technical environment is believed to promote the diffusion of energy efficiency technologies. However, opponents doubt the fact that these programs have the capacity to significantly reduce U.S. energy consumption. In order to contribute to the ongoing discussion, this quantitative study investigated the relationships existing among electricity consumption/ intensity, energy programs and contextual factors in the U.S. buildings sector. Specifically, this study sought to identify the significant predictors of electricity consumption and intensity, as well as estimate the overall impact of selected energy programs on electricity consumption and intensity. Using state-level secondary data for 51 U.S. states from 2006 to 2009, seven random effects panel data regression models confirmed the existence of significant relationships among some energy programs, contextual factors, and electricity consumption/intensity. The most significant predictors of improved electricity efficiency included the price of electricity, public benefits funds program, building energy codes program, financial and informational incentives program and the Leadership in Energy and Environmental Design (LEED) program. Consistently, the Southern region of the U.S. was associated with high electricity consumption and intensity; while the U.S. commercial sector was the greater benefactor from energy programs. On the average, energy programs were responsible for approximately 7% of the variation observed in electricity consumption and intensity, over and above the variation associated with the contextual factors. This study also had implications in program implementation theory, and revealed that resource availability, stringency and adherence had significant impacts on program outcomes. Using seven classification tables, this study categorized and matched the predictors of electricity consumption and intensity with the specific energy sectors in which they demonstrated significance. Project developers, energy advocates, policy makers, program administrators, building occupants and other stakeholders could use study findings in conjunction with other empirical findings, to make informed decisions regarding the adoption, continuation or discontinuation of energy programs, while taking contextual factors into consideration. The adoption and efficient implementation of the most significant programs could reduce U.S. electricity consumption, and in the long term, probably reduce U.S. energy waste, environmental degradation, energy imports, energy prices, and demands for expanding energy generation and distribution infrastructure.

A survey of energy drink and alcohol mixed with energy drink consumption.

PubMed

Magnezi, Racheli; Bergman, Lisa Carroll; Grinvald-Fogel, Haya; Cohen, Herman Avner

2015-01-01

Energy drink consumption among youth is increasing despite recommendations by the American Academy of Pediatrics to eliminate consumption by youth. This study provides information on consumption of energy drinks and alcohol mixed with energy drinks (AmED) in a sample of Israeli youth and how consumer knowledge about the risks affects consumption rates. The study was conducted in three Tel Aviv public schools, with a total enrollment of 1,253 students in grades 8 through 12. Among them, 802 students completed a 49-item questionnaire about energy drink and AmED consumption, for a 64 % response rate Non-responders included 451 students who were absent or refused to participate. All students in the same school were administered the questionnaire on the same day. Energy drinks are popular among youth (84.2 % have ever drunk). More tenth through twelfth grade students consumed energy drinks than eighth and ninth grade students. Students who began drinking in elementary school (36.8 %) are at elevated risk for current energy drink (P < .001) and AmED (P = .002) use. Knowledge about amounts consumed and recommended allowances is associated with less consumption (OR 1.925; 95 %CI 1.18-3.14). The association between current AmED consumption and drinking ED at a young age is important. Boys and those who start drinking early have a greater risk of both ED and AmED consumption. The characteristics of early drinkers can help increase awareness of potential at-risk youth, such as junior and senior high school students with less educated or single parents. Risks posed by early use on later energy drink and AmED consumption are concerning. We suggest that parents should limit accessibility. Increased knowledge about acceptable and actual amounts of caffeine in a single product might decrease consumption.

Designing a gradual transition to a hydrogen economy in Spain

NASA Astrophysics Data System (ADS)

Brey, J. J.; Brey, R.; Carazo, A. F.; Contreras, I.; Hernández-Díaz, A. G.; Gallardo, V.

The lack of sustainability of the current Spanish energy system makes it necessary to study the adoption of alternative energy models. One of these is what is known as the hydrogen economy. In this paper, we aim to plan, for the case of Spain, an initial phase for transition to this energy model making use of the potential offered by each Spanish region. Specifically, the target pursued is to satisfy at least 15% of energy demand for transport by 2010 through renewable sources. We plan to attain this target gradually, establishing intermediate stages consisting of supplying 5 and 10% of the energy demand for transport by 2006 and 2008, respectively. The results obtained allow us to determine, for each region, the hydrogen production and consumption, the renewable energy sources used to obtain hydrogen and the transport requirements between regions.

77 FR 8238 - Notice of Petition for Waiver of GE Appliances From the Department of Energy Residential...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-14

... of Energy (DOE) test procedure for determining the energy consumption of certain specific electric... procedures may evaluate the basic model in a manner so unrepresentative of its true energy consumption... in a manner representative of its energy consumption. 10 CFR 430.27(b)(1)(iii). The Assistant...

10 CFR 431.224 - Uniform test method for the measurement of energy consumption for traffic signal modules and...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Uniform test method for the measurement of energy consumption for traffic signal modules and pedestrian modules. 431.224 Section 431.224 Energy DEPARTMENT OF... measurement of energy consumption for traffic signal modules and pedestrian modules. (a) Scope. This section...

In situ evaluation of water and energy consumptions at the end use level: The influence of flow reducers and temperature in baths.

PubMed

Matos, C; Briga-Sá, A; Bentes, I; Faria, D; Pereira, S

2017-05-15

Nowadays, water and energy consumption is intensifying every year in most of the countries. This perpetual increase will not be supportable in the long run, making urgently to manage these resources on a sustainable way. Domestic consumptions of water and electric energy usually are related and it's important to study that relation, identifying opportunities for use efficient improvement. In fact, without an understanding of water-energy relations, there are water efficiency measures that may lead to unintentional costs in the energy efficiency field. In order to take full advantage of combined effect between water and energy water management methodologies, it is necessary to collect data to ensure that the efforts are directed through the most effective paths. This paper presents a study based in the characterization, measurement and analysis of water and electricity consumption in a single family house (2months period) in order to find an interdependent relationship between consumptions at the end user level. The study was carried out on about 200 baths, divided in four different scenarios where the influence of two variables was tested: the flow reducer valve and the bath temperature. Data showed that the presence of flow reducer valve decreased electric energy consumption and water consumption, but increased the bath duration. Setting a lower temperature in water-heater, decreased electric consumption, water consumption and bath duration. Analysing the influence of the flow reducer valve and 60°C temperature simultaneously, it was concluded that it had a significant influence on electric energy consumption and on the baths duration but had no influence on water consumption. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

Determining the Water Bootprint of the Army’s Supply Chain

DTIC Science & Technology

2011-05-01

water, flue gas desulfurization ) • Water consumption estimates will be compared with other modeling techniques Utility Energy Methods Army End Users...Sector Gas /Petroleum Refining Retail Less Gas /Retail Trade Food & Beverages/ Food & Drinking Places Concession/Personal Care Services CY10 Retail...this study • Data collected to support initial reporting of Greenhouse Gas (GHG) Inventory (pursuant to EO 13514) can be leveraged to support this

Evaluation of a Prototype pCO2 Optical Sensor

NASA Astrophysics Data System (ADS)

Sanborn-Marsh, C.; Sutton, A.; Sabine, C. L.; Lawrence-Salvas, N.; Dietrich, C.

2016-12-01

Anthropogenic greenhouse gas emissions continue to rise, driving climate change and altering the ocean carbonate systems. Carbonate chemistry can be characterized by any two of the four parameters: pH, total alkalinity, dissolved inorganic carbon, and partial pressure of dissolved carbon dioxide gas (pCO2). To fully monitor these dynamic systems, researchers must deploy a more temporally and spatially comprehensive sensor network. Logistical challenges, such as the energy consumption, size, lifetime, depth range, and cost of pCO2 sensors have limited the network's reach so far. NOAA's Pacific Marine Environmental Laboratory has conducted assessment tests of a pCO2 optical sensor (optode), recently developed by Atamanchuk et al (2014). We hope to deploy this optode in the summer of 2017 on high-resolution moored profiler, along with temperature, salinity, and oxygen sensors. While most pCO2 optodes have energy consumptions of 3-10 W, this 36mm-diameter by 86mm-long instrument consumes a mere 7-80 mW. Initial testing showed that its accuracy varied within an absolute range of 2-75 μatm, depending on environmental conditions, including temperature, salinity, response time, and initial calibration. Further research independently examining the effects of each variable on the accuracy of the data will also be presented.

Energy Consumption Trends in Energy Scarce and Rich Countries: Comparative Study for Pakistan and Saudi Arabia

NASA Astrophysics Data System (ADS)

Gazder, Uneb

2017-11-01

Energy crisis is raising serious concerns throughout the world. There has been constant rise in energy consumption corresponding to the increase in global population. This sector affects the other pillars of national economy including industries and transportation. Because of these reasons, the traditional fossil-based energy sources are depleting rapidly, resulting in high and unstable energy prices. Saudi Arabia and Pakistan, although different from each other in terms of their economic stability and political systems, still rely heavily on the traditional fossil fuels. This paper presents the comparison of these two countries in terms of their energy consumption and factors affecting it. These factors include, but not limited to, economic development, and growth in population and other sectors such as; industries, transportation, etc. The comparison is also made with the regional and global energy consumption trends and these countries. Moreover, regression models were built to predict energy consumption till 2040 and compare the growth in this sector and share in global energy demand. Energy consumption in oil-rich countries (Saudi Arabia) has been driven through its economic development, while for energy insecure country (Pakistan) it is mainly because of population growth. It was also found that in the next two decades the share of Pakistan in the global energy demand will increase. This concludes that population growth will have more impact on energy consumption than economic growth. It could mean that the shift in energy sector would shift towards sustenance instead of using energy for commercial or industrial usage. Conference Track: Policy and Finance and Strategies

Impacts of wireless charging lanes on travel time and energy consumption in a two-lane road system

NASA Astrophysics Data System (ADS)

He, Jia; Yang, Hai; Huang, Hai-Jun; Tang, Tie-Qiao

2018-06-01

In this paper, we propose a method to compare different energy consumption models and design a strategy to study the quantitative effects of wireless charging lane (WCL) on each electric vehicle's (EV's) link travel time. We utilize the modified energy consumption model and strategy to explore electric vehicle's electricity consumption and link travel time in a two-lane system with a WCL. The numerical results show that EVs' charging behavior on WCL will cause the drivers to execute the lane-changing maneuvers frequently and that the WCL has prominent impacts on EV's energy consumption and travel time, i.e., the capacity drops by 8%-17% while the EV's energy consumption increases by 3%-14% in the two-lane road system.

Changes in cotton gin energy consumption apportioned by ten functions

USDA-ARS?s Scientific Manuscript database

The public is concerned about air quality and sustainability. Cotton producers, gin owners and plant managers are concerned about rising energy prices. Both have an interest in cotton gin energy consumption trends. Changes in cotton gins’ energy consumption over the past fifty years, a period of ...

77 FR 18799 - Proposed Agency Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-28

... Buildings Energy Consumption Survey.'' The Federal Energy Administration Act of 1974 (Pub. L. 93-275, 15 U.S... Buildings Energy Consumption Survey (CBECS) has been conducted nine times covering the years 1979, 1983 and 1986 under the name of the ``Nonresidential Buildings Energy Consumption Survey,'' and years 1989, 1992...

Analysis of Energy Consumption for Ad Hoc Wireless Sensor Networks Using a Bit-Meter-per-Joule Metric

NASA Astrophysics Data System (ADS)

Gao, J. L.

2002-04-01

In this article, we present a system-level characterization of the energy consumption for sensor network application scenarios. We compute a power efficiency metric -- average watt-per-meter -- for each radio transmission and extend this local metric to find the global energy consumption. This analysis shows how overall energy consumption varies with transceiver characteristics, node density, data traffic distribution, and base-station location.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Regnier, Cindy; Harding, Ari; Robinson, Alastair

The University of Hawai’i at Mānoa (UHM) partnered with the US Department of Energy (DOE) and the Hawai`i Clean Energy Initiative to develop and implement solutions to retrofit exiting buildings to reduce energy consumption by at least 30% as part of DOE’s Commercial Building Partnerships (CBP) Program1. Kuykendall Hall, located on the UHM campus in Honolulu, was the focus of a CBP analysis and design collaboration among the University of Hawai’i, their consultants, and Lawrence Berkeley National Laboratory (LBNL). Kuykendall Hall consists of two 1960s-era wings – a four-story wing containing classrooms, and a seven-story tower containing offices – withmore » a total floor area of approximately 76,000 square feet (ft²).« less

Analysis of the performance of the drive system and diffuser of the Langley unitary plan wind tunnel

NASA Technical Reports Server (NTRS)

Hasel, L. E.; Stallings, R. L.

1981-01-01

A broad program was initiated at the Langley Research Center in 1973 to reduce the energy consumption of the laboratory. As a part of this program, the performance characteristics of the Unitary Plan Wind Tunnel were reexamined to determine if potential methods for incresing the operating efficiencies of the tunnel could be formulated. The results of that study are summarized. The performance characteristics of the drive system components and the variable-geometry diffuser system of the tunnel are documented and analyzed. Several potential methods for reducing the energy requirements of the facility are discussed.

Energy parasites trigger oncogene mutation.

PubMed

Pokorný, Jiří; Pokorný, Jan; Jandová, Anna; Kobilková, Jitka; Vrba, Jan; Vrba, Jan

2016-10-01

Cancer initialization can be explained as a result of parasitic virus energy consumption leading to randomized genome chemical bonding. Analysis of experimental data on cell-mediated immunity (CMI) containing about 12,000 cases of healthy humans, cancer patients and patients with precancerous cervical lesions disclosed that the specific cancer and the non-specific lactate dehydrogenase-elevating (LDH) virus antigen elicit similar responses. The specific antigen is effective only in cancer type of its origin but the non-specific antigen in all examined cancers. CMI results of CIN patients display both healthy and cancer state. The ribonucleic acid (RNA) of the LDH virus parasitizing on energy reduces the ratio of coherent/random oscillations. Decreased effect of coherent cellular electromagnetic field on bonding electrons in biological macromolecules leads to elevating probability of random genome reactions. Overlapping of wave functions in biological macromolecules depends on energy of the cellular electromagnetic field which supplies energy to bonding electrons for selective chemical bonds. CMI responses of cancer and LDH virus antigens in all examined healthy, precancerous and cancer cases point to energy mechanism in cancer initiation. Dependence of the rate of biochemical reactions on biological electromagnetic field explains yet unknown mechanism of genome mutation.

US HPWH Market Transformation: Where We've Been and Where to Go Next

DOE Office of Scientific and Technical Information (OSTI.GOV)

Butzbaugh, Joshua B.; Sandahl, Linda J.; Baechler, Michael C.

Water heating is the second largest energy end use in the U.S. residential sector, accounting for approximately 17% of U.S. residential energy consumption. Heat pump water heaters (HPWH) consume 60% less energy than conventional electric-resistance water heaters. However, HPWHs presently make up just 1% of all electric water heaters sold in the residential sector. If market penetration doesn’t increase, there is a possibility that major water heater manufacturers will decrease investment in their HPWH product lines and eventually discontinue their HPWH models. Both market barriers and technology limitations have prevented market adoption in the past. However, through cooperation between manufacturersmore » and the energy efficiency community, technological barriers have decreased in importance. The U.S. Department of Energy (DOE), in partnership with National Laboratories, industry, and the energy efficiency community, is undertaking a national initiative with the intent to increase U.S. market penetration of HPWHs. This paper will serve as an important historical reference on HPWH commercialization and market transformation efforts in the U.S., as well as provide a detailed analysis of market opportunities and offer next steps via DOE’s national initiative.« less

Potential reduction of energy consumption in public university library

NASA Astrophysics Data System (ADS)

Noranai, Z.; Azman, ADF

2017-09-01

Efficient electrical energy usage has been recognized as one of the important factor to reduce cost of electrical energy consumption. Various parties have been emphasized about the importance of using electrical energy efficiently. Inefficient usage of electrical energy usage lead to biggest factor increasing of administration cost in Universiti Tun Hussein Onn Malaysia. With this in view, a project the investigate potential reduction electrical energy consumption in Universiti Tun Hussein Onn Malaysia was carried out. In this project, a case study involving electrical energy consumption of Perpustakaan Tunku Tun Aminah was conducted. The scopes of this project are to identify energy consumption in selected building and to find the factors that contributing to wastage of electrical energy. The MS1525:2001, Malaysian Standard - Code of practice on energy efficiency and use of renewable energy for non-residential buildings was used as reference. From the result, 4 saving measure had been proposed which is change type of the lamp, install sensor, decrease the number of lamp and improve shading coefficient on glass. This saving measure is suggested to improve the efficiency of electrical energy consumption. Improve of human behaviour toward saving energy measure can reduce 10% from the total of saving cost while on building technical measure can reduce 90% from total saving cost.

Energy Drink Consumption Practices of Young People in Bahrain

PubMed Central

Nassaif, Maryam M.; Alobed, Ghufran J. J.; Alaam, Noor A. A.; Alderrazi, Abdulla N.; Awdhalla, Muyssar S.; Vaithinathan, Asokan G.

2015-01-01

Background: Energy drink (ED) consumption is becoming increasingly popular among young Bahrainis, who may be unaware of the health risks associated with ED consumption. To date, there have been few publications on the consumption of ED in Bahrain, particularly among adolescents. This study seeks to fill a gap in the literature on energy drink consumption practices of Bahraini adolescents. Methods: Data were collected using a previously established European Food Safety Authority questionnaire. Cross-sectional analyses were conducted on a convenience sample of 262 Bahraini students aged 10 to 18 years. Results: Most participants consumed energy drinks 2 to 3 times per week and consumed two or more cans at a time. Eighty percent of partcipants preferred energy drinks with sugar. Participants in the older age group and higher educational level consumed more ED. The majority (57%) consumed ED at home with friends as part of socialization. Notably, 60% of the parents of the respondents have not consumed energy drinks. Prominent reasons for consumption of energy drinks included: taste (40%), energy (30%), stay awake (13%), augment concentration (4%), and enhance sports performance (6%). Conclusion: Energy drink consumption is a popular socialization activity among adolescents of Bahrain. The potential health risks necessitates the need for novel health promotion strategies and advocacy efforts for healthy hydration practices. PMID:29138721

The relationship between CO2 emission, energy consumption and economic growth in Malaysia: a three-way linkage approach.

PubMed

Sulaiman, Chindo; Abdul-Rahim, A S

2017-11-01

This study examines the three-way linkage relationships between CO 2 emission, energy consumption and economic growth in Malaysia, covering the 1975-2015 period. An autoregressive distributed lag approach was employed to achieve the objective of the study and gauged by dynamic ordinary least squares. Additionally, vector error correction model, variance decompositions and impulse response functions were employed to further examine the relationship between the interest variables. The findings show that economic growth is neither influenced by energy consumption nor by CO 2 emission. Energy consumption is revealed to be an increasing function of CO 2 emission. Whereas, CO 2 emission positively and significantly depends on energy consumption and economic growth. This implies that CO 2 emission increases with an increase in both energy consumption and economic growth. Conclusively, the main drivers of CO 2 emission in Malaysia are proven to be energy consumption and economic growth. Therefore, renewable energy sources ought to be considered by policy makers to curb emission from the current non-renewable sources. Wind and biomass can be explored as they are viable sources. Energy efficiency and savings should equally be emphasised and encouraged by policy makers. Lastly, growth-related policies that target emission reduction are also recommended.

Energy Drink Consumption Practices of Young People in Bahrain.

PubMed

Nassaif, Maryam M; Alobed, Ghufran J J; Alaam, Noor A A; Alderrazi, Abdulla N; Awdhalla, Muyssar S; Vaithinathan, Asokan G

2015-01-01

Energy drink (ED) consumption is becoming increasingly popular among young Bahrainis, who may be unaware of the health risks associated with ED consumption. To date, there have been few publications on the consumption of ED in Bahrain, particularly among adolescents. This study seeks to fill a gap in the literature on energy drink consumption practices of Bahraini adolescents. Data were collected using a previously established European Food Safety Authority questionnaire. Cross-sectional analyses were conducted on a convenience sample of 262 Bahraini students aged 10 to 18 years. Most participants consumed energy drinks 2 to 3 times per week and consumed two or more cans at a time. Eighty percent of partcipants preferred energy drinks with sugar. Participants in the older age group and higher educational level consumed more ED. The majority (57%) consumed ED at home with friends as part of socialization. Notably, 60% of the parents of the respondents have not consumed energy drinks. Prominent reasons for consumption of energy drinks included: taste (40%), energy (30%), stay awake (13%), augment concentration (4%), and enhance sports performance (6%). Energy drink consumption is a popular socialization activity among adolescents of Bahrain. The potential health risks necessitates the need for novel health promotion strategies and advocacy efforts for healthy hydration practices.

Energy drink use and its relationship to masculinity, jock identity, and fraternity membership among men.

PubMed

Wimer, David J; Levant, Ronald F

2013-07-01

The present study examined whether previous findings linking masculinity constructs and health behaviors applied to a relatively recent health risk behavior for men, the consumption of energy drinks. In addition, it also examined whether self-identifying as a jock and being a member of a fraternity would moderate the relationships between masculinity constructs and energy drink consumption. A total of 589 men completed measures of three masculinity constructs (endorsement of traditional masculinity ideology, conformity to masculine norms, and gender role conflict), energy drink consumption, jock identity, and fraternity membership, in addition to a demographic questionnaire. Age, endorsement of traditional masculinity ideology, and conforming to the masculine norms of risk taking and primacy of work were identified to be significant predictors of energy drink consumption. Furthermore, jock identity moderated the relationship between the endorsement of traditional masculinity ideology and energy drink consumption whereas fraternity membership moderated the relationship between conforming to the masculine norm of violence and energy drink consumption. Limitations, implications, and potential future directions are discussed.

Computer simulated building energy consumption for verification of energy conservation measures in network facilities

NASA Technical Reports Server (NTRS)

Plankey, B.

1981-01-01

A computer program called ECPVER (Energy Consumption Program - Verification) was developed to simulate all energy loads for any number of buildings. The program computes simulated daily, monthly, and yearly energy consumption which can be compared with actual meter readings for the same time period. Such comparison can lead to validation of the model under a variety of conditions, which allows it to be used to predict future energy saving due to energy conservation measures. Predicted energy saving can then be compared with actual saving to verify the effectiveness of those energy conservation changes. This verification procedure is planned to be an important advancement in the Deep Space Network Energy Project, which seeks to reduce energy cost and consumption at all DSN Deep Space Stations.

Greenhouse Gas Emissions, Energy Consumption and Economic Growth: A Panel Cointegration Analysis for 16 Asian Countries.

PubMed

Lu, Wen-Cheng

2017-11-22

This research investigates the co-movement and causality relationships between greenhouse gas emissions, energy consumption and economic growth for 16 Asian countries over the period 1990-2012. The empirical findings suggest that in the long run, bidirectional Granger causality between energy consumption, GDP and greenhouse gas emissions and between GDP, greenhouse gas emissions and energy consumption is established. A non-linear, quadratic relationship is revealed between greenhouse gas emissions, energy consumption and economic growth, consistent with the environmental Kuznets curve for these 16 Asian countries and a subsample of the Asian new industrial economy. Short-run relationships are regionally specific across the Asian continent. From the viewpoint of energy policy in Asia, various governments support low-carbon or renewable energy use and are reducing fossil fuel combustion to sustain economic growth, but in some countries, evidence suggests that energy conservation might only be marginal.

Greenhouse Gas Emissions, Energy Consumption and Economic Growth: A Panel Cointegration Analysis for 16 Asian Countries

PubMed Central

2017-01-01

This research investigates the co-movement and causality relationships between greenhouse gas emissions, energy consumption and economic growth for 16 Asian countries over the period 1990–2012. The empirical findings suggest that in the long run, bidirectional Granger causality between energy consumption, GDP and greenhouse gas emissions and between GDP, greenhouse gas emissions and energy consumption is established. A non-linear, quadratic relationship is revealed between greenhouse gas emissions, energy consumption and economic growth, consistent with the environmental Kuznets curve for these 16 Asian countries and a subsample of the Asian new industrial economy. Short-run relationships are regionally specific across the Asian continent. From the viewpoint of energy policy in Asia, various governments support low-carbon or renewable energy use and are reducing fossil fuel combustion to sustain economic growth, but in some countries, evidence suggests that energy conservation might only be marginal. PMID:29165399

State energy data report 1996: Consumption estimates

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sectors. The estimates are developed in the Combined State Energy Data System (CSEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining CSEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. CSEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public and (2) to provide themore » historical series necessary for EIA`s energy models. To the degree possible, energy consumption has been assigned to five sectors: residential, commercial, industrial, transportation, and electric utility sectors. Fuels covered are coal, natural gas, petroleum, nuclear electric power, hydroelectric power, biomass, and other, defined as electric power generated from geothermal, wind, photovoltaic, and solar thermal energy. 322 tabs.« less

10 CFR Appendix D to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Clothes Dryers

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Uniform Test Method for Measuring the Energy Consumption... CONSERVATION ENERGY CONSERVATION PROGRAM FOR CONSUMER PRODUCTS Test Procedures Pt. 430, Subpt. B, App. D Appendix D to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Clothes...

10 CFR Appendix D to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Clothes Dryers

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Uniform Test Method for Measuring the Energy Consumption... CONSERVATION ENERGY CONSERVATION PROGRAM FOR CONSUMER PRODUCTS Test Procedures Pt. 430, Subpt. B, App. D Appendix D to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Clothes...

10 CFR Appendix D to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Clothes Dryers

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Uniform Test Method for Measuring the Energy Consumption... CONSERVATION ENERGY CONSERVATION PROGRAM FOR CONSUMER PRODUCTS Test Procedures Pt. 430, Subpt. B, App. D Appendix D to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Clothes...

Biodiesel Supply and Consumption in the Short-Term Energy Outlook

EIA Publications

2009-01-01

The historical biodiesel consumption data published in the Energy Information Administration's Monthly Energy Review March 2009 edition were revised to account for imports and exports. Table 10.4 of the Monthly Energy Review was expanded to display biodiesel imports, exports, stocks, stock change, and consumption. Similar revisions were made in the April 2009 edition of the Short-Term Energy Outlook (STEO).

10 CFR Appendix B to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Freezers

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Uniform Test Method for Measuring the Energy Consumption... ENERGY CONSERVATION PROGRAM FOR CONSUMER PRODUCTS Test Procedures Pt. 430, Subpt. B, App. B Appendix B to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Freezers The provisions...

10 CFR Appendix B to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Freezers

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Uniform Test Method for Measuring the Energy Consumption... ENERGY CONSERVATION PROGRAM FOR CONSUMER PRODUCTS Test Procedures Pt. 430, Subpt. B, App. B Appendix B to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Freezers The provisions...

10 CFR Appendix B to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Freezers

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Uniform Test Method for Measuring the Energy Consumption... ENERGY CONSERVATION PROGRAM FOR CONSUMER PRODUCTS Test Procedures Pt. 430, Subpt. B, App. B Appendix B to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Freezers The provisions...

Modeling an impact of road geometric design on vehicle energy consumption

NASA Astrophysics Data System (ADS)

Luin, Blaž; Petelin, Stojan; Al-Mansour, Fouad

2017-11-01

Some roads connect traffic origins and destinations directly, some use winding, indirect routes. Indirect connections result in longer distances driven and increased fuel consumption. A similar effect is observed on congested roads and mountain roads with many changes in altitude. Therefore a framework to assess road networks based on energy consumption is proposed. It has been shown that road geometry has significant impact on overall traffic energy consumption and emissions. The methodology presented in the paper analyzes impact of traffic volume, shares of vehicle classes, road network configuration on the energy used by the vehicles. It can be used to optimize energy consumption with efficient traffic management and to choose optimum new road in the design phase. This is especially important as the energy consumed by the vehicles shortly after construction supersedes the energy spent for the road construction.

Energy consumption and usage characteristics from field measurements of residential dishwashers, clothes washers and clothes dryers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, Y.L.; Grot, R.A.

1980-10-01

The measured energy consumption and usage characteristics for household dishwashers, clothes washers, and clothes dryers for ten townhouses at Twin Rivers, N.J., are presented. Whenever the dishwashers and/or clothes washers were in use, the energy consumption, water consumption, frequency of usage, and water temperature were measured by a data acquisition system. The electrical energy of electric clothes dryers and the gas consumption of gas clothes dryers were measured, as well as their frequency and duration of use, and exhaust temperature. Typical household usage patterns of these major appliances are included.

Discovering the Highest Energy Neutrinos Using a Radio Phased Array

NASA Astrophysics Data System (ADS)

Vieregg, Abigail

2018-06-01

The detection of high energy neutrinos is an important step toward understanding the most energetic cosmic accelerators and would enable tests of fundamental physics at energy scales that cannot easily be achieved on Earth. IceCube has detected astrophysical neutrinos at lower energies, and at higher energies the best limits to date on the flux comes from IceCube and the ANITA experiment, a NASA balloon-borne radio telescope designed to detect coherent radio Cherenkov emission from cosmogenic ultra-high energy neutrinos. I will discuss a new radio phased array design that will push the achievable sensitivity and lower the energy threshold. I will discuss the initial deployment and performance of an 8-channel system in a ground-based experiment at the South Pole (ARA), and the plans for scaling to O(100) channels and lowering the power consumption for future balloon-borne and ground-based applications.

Solar Thermal Energy Storage in a Photochromic Macrocycle.

PubMed

Vlasceanu, Alexandru; Broman, Søren L; Hansen, Anne S; Skov, Anders B; Cacciarini, Martina; Kadziola, Anders; Kjaergaard, Henrik G; Mikkelsen, Kurt V; Nielsen, Mogens Brøndsted

2016-07-25

The conversion and efficient storage of solar energy is recognized to hold significant potential with regard to future energy solutions. Molecular solar thermal batteries based on photochromic systems exemplify one possible technology able to harness and apply this potential. Herein is described the synthesis of a macrocycle based on a dimer of the dihydroazulene/vinylheptafulvene (DHA/VHF) photo/thermal couple. By taking advantage of conformational strain, this DHA-DHA macrocycle presents an improved ability to absorb and store incident light energy in chemical bonds (VHF-VHF). A stepwise energy release over two sequential ring-closing reactions (VHF→DHA) combines the advantages of an initially fast discharge, hypothetically addressing immediate energy consumption needs, followed by a slow process for consistent, long-term use. This exemplifies another step forward in the molecular engineering and design of functional organic materials towards solar thermal energy storage and release. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Energy performance analysis of a detached single-family house to be refurbished

NASA Astrophysics Data System (ADS)

Aleixo, Kevin; Curado, António

2017-07-01

This study was developed with the purpose of analyzing the reinforcement of the energy performance in a detached single-family house to be refurbished, using this building as a case-study for simulation and experimental analysis. The building is located in Viana do Castelo, a city in the northwest of Portugal nearby the Atlantic Ocean. The developed study was carried out in order to characterize the thermal performance of the house, using simulation analysis in a dynamic regime. The energy consumption study was developed in permanent regime analysis, using simulation tools. At the end, the study aimed to propose and define the best retrofitting solutions, both passive and active, and to improve the energy performance of the building. The outcomes of the study provided the importance of passive retrofitting solutions on thermal comfort and energy performance. The use of a set of thermal solutions, as the insulation of the roof, walls and the windows, it is possible to achieve a global gain of 0, 63 °C and to reduce energy consumption in 61, 46 [kWh/m2.year]. The study of the building in a simplified thermal regime, according to the Portuguese energy efficiency regulation, allowed the determination of the energy efficiency class of the house and retrofitting solutions proposed. The initial energy performance class of the building is C. With the application of a passive set of solutions, it's possible to improve the energy performance to a class B. With the implementation of some active solutions, it is possible to reach an energy class A +.

Energy efficiency through integrated environmental management.

PubMed

Benromdhane, Souad Ahmed

2015-05-01

Integrated environmental management became an economic necessity after industrial development proved to be unsustainable without consideration of environmental direct and indirect impacts. Energy dependency and air pollution along with climate change grew into major challenges facing developed and developing countries alike. Thus, a new global market structure emerged and changed the way we do trade. The search intensified for alternatives to petroleum. However, scientists, policy makers, and environmental activists agreed to focus on strategic conservation and optimization of energy use. Environmental concerns will remain partially unaddressed with the current pace of consumption because greenhouse gas emissions will continue to rise with economic growth. This paper discusses energy efficiency, steady integration of alternative sources, and increased use of best available technologies. Energy criteria developed for environmental labeling certification are presented. Our intention is to encourage manufacturers and service providers to supply consumers with less polluting and energy-consuming goods and services, inform consumers of the environmental and energy impacts, and thereby instill sustainable and responsible consumption. As several programs were initiated in developed countries, environmental labeling requirements created barriers to many exports manufactured in developing countries, affecting current world trade and putting more pressure on countries to meet those requirements. Defining an institutional and legal framework of environmental labeling is a key challenge in implementing such programs for critical economic sectors like tourism, textiles, and food production where energy needs are the most important aspect to control. A case study of Tunisia and its experience with eco-labeling is presented.

Accurate Energy Consumption Modeling of IEEE 802.15.4e TSCH Using Dual-BandOpenMote Hardware.

PubMed

Daneels, Glenn; Municio, Esteban; Van de Velde, Bruno; Ergeerts, Glenn; Weyn, Maarten; Latré, Steven; Famaey, Jeroen

2018-02-02

The Time-Slotted Channel Hopping (TSCH) mode of the IEEE 802.15.4e amendment aims to improve reliability and energy efficiency in industrial and other challenging Internet-of-Things (IoT) environments. This paper presents an accurate and up-to-date energy consumption model for devices using this IEEE 802.15.4e TSCH mode. The model identifies all network-related CPU and radio state changes, thus providing a precise representation of the device behavior and an accurate prediction of its energy consumption. Moreover, energy measurements were performed with a dual-band OpenMote device, running the OpenWSN firmware. This allows the model to be used for devices using 2.4 GHz, as well as 868 MHz. Using these measurements, several network simulations were conducted to observe the TSCH energy consumption effects in end-to-end communication for both frequency bands. Experimental verification of the model shows that it accurately models the consumption for all possible packet sizes and that the calculated consumption on average differs less than 3% from the measured consumption. This deviation includes measurement inaccuracies and the variations of the guard time. As such, the proposed model is very suitable for accurate energy consumption modeling of TSCH networks.

Accurate Energy Consumption Modeling of IEEE 802.15.4e TSCH Using Dual-BandOpenMote Hardware

PubMed Central

Municio, Esteban; Van de Velde, Bruno; Latré, Steven

2018-01-01

The Time-Slotted Channel Hopping (TSCH) mode of the IEEE 802.15.4e amendment aims to improve reliability and energy efficiency in industrial and other challenging Internet-of-Things (IoT) environments. This paper presents an accurate and up-to-date energy consumption model for devices using this IEEE 802.15.4e TSCH mode. The model identifies all network-related CPU and radio state changes, thus providing a precise representation of the device behavior and an accurate prediction of its energy consumption. Moreover, energy measurements were performed with a dual-band OpenMote device, running the OpenWSN firmware. This allows the model to be used for devices using 2.4 GHz, as well as 868 MHz. Using these measurements, several network simulations were conducted to observe the TSCH energy consumption effects in end-to-end communication for both frequency bands. Experimental verification of the model shows that it accurately models the consumption for all possible packet sizes and that the calculated consumption on average differs less than 3% from the measured consumption. This deviation includes measurement inaccuracies and the variations of the guard time. As such, the proposed model is very suitable for accurate energy consumption modeling of TSCH networks. PMID:29393900

Factors That Influence Human Behavior And Negatively Affect Energy Consumption In USMC Ground Units During Operations

DTIC Science & Technology

2016-09-01

vehicle idling, energy strategy, energy behavior, energy reductions, behavior change 15. NUMBER OF PAGES 79 16. PRICE CODE 17. SECURITY...INFLUENCE HUMAN BEHAVIOR AND NEGATIVELY AFFECT ENERGY CONSUMPTION IN USMC GROUND UNITS DURING OPERATIONS by John A. Peters September 2016...NEGATIVELY AFFECT ENERGY CONSUMPTION IN USMC GROUND UNITS DURING OPERATIONS 5. FUNDING NUMBERS 6. AUTHOR(S) John A. Peters 7. PERFORMING

10 CFR Appendix G to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Unvented Home Heating Equipment

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Uniform Test Method for Measuring the Energy Consumption of Unvented Home Heating Equipment G Appendix G to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY..., App. G Appendix G to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of...

10 CFR Appendix G to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Unvented Home Heating Equipment

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Uniform Test Method for Measuring the Energy Consumption of Unvented Home Heating Equipment G Appendix G to Subpart B of Part 430 Energy DEPARTMENT OF ENERGY..., App. G Appendix G to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of...

Determine Neuronal Tuning Curves by Exploring Optimum Firing Rate Distribution for Information Efficiency

PubMed Central

Han, Fang; Wang, Zhijie; Fan, Hong

2017-01-01

This paper proposed a new method to determine the neuronal tuning curves for maximum information efficiency by computing the optimum firing rate distribution. Firstly, we proposed a general definition for the information efficiency, which is relevant to mutual information and neuronal energy consumption. The energy consumption is composed of two parts: neuronal basic energy consumption and neuronal spike emission energy consumption. A parameter to model the relative importance of energy consumption is introduced in the definition of the information efficiency. Then, we designed a combination of exponential functions to describe the optimum firing rate distribution based on the analysis of the dependency of the mutual information and the energy consumption on the shape of the functions of the firing rate distributions. Furthermore, we developed a rapid algorithm to search the parameter values of the optimum firing rate distribution function. Finally, we found with the rapid algorithm that a combination of two different exponential functions with two free parameters can describe the optimum firing rate distribution accurately. We also found that if the energy consumption is relatively unimportant (important) compared to the mutual information or the neuronal basic energy consumption is relatively large (small), the curve of the optimum firing rate distribution will be relatively flat (steep), and the corresponding optimum tuning curve exhibits a form of sigmoid if the stimuli distribution is normal. PMID:28270760

Maximization of current efficiency for organic pollutants oxidation at BDD, Ti/SnO2-Sb/PbO2, and Ti/SnO2-Sb anodes.

PubMed

Xing, Xuan; Ni, Jinren; Zhu, Xiuping; Jiang, Yi; Xia, Jianxin

2018-08-01

Whereas electrochemical oxidation is noted for its ability to degrade bio-refractory organics, it has also been incorrectly criticized for excessive energy consumption. The present paper rectifies this misunderstanding by demonstrating that the energy actually consumed in the degradation process is much less than that wasted in the side reaction of oxygen evolution. To minimize the side reaction, the possible highest instantaneous current efficiency (PHICE) for electrochemical oxidation of phenol at Boron-doped Diamond (BDD), Ti/SnO 2 -Sb/PbO 2 (PbO 2 ), and Ti/SnO 2 -Sb (SnO 2 ) anodes has been investigated systematically, and found to reach almost 100% at the BDD anode compared with 23% at the PbO 2 anode and 9% at the SnO 2 anode. The significant discrepancy between PHICE values at the various anodes is interpreted in terms of different existing forms of hydroxyl radicals. For each anode system, the PHICEs are maintained experimentally using a computer-controlled exponential decay current mode throughout the electrolysis process. For applications, the minimized energy consumption is predicted by response surface methodology, and demonstrated for the BDD anode system. Consequently, almost 100% current efficiency is achieved (for a relatively meagre energy consumption of 17.2 kWh kgCOD -1 ) along with excellent COD degradation efficiency by optimizing the initial current density, flow rate, electrolysis time, and exponential decay constant. Compared with galvanostatic conditions, over 70% of the energy is saved in the present study, thus demonstrating the great potential of electrochemical oxidation for practical applications. Copyright © 2018 Elsevier Ltd. All rights reserved.

Smart energy management system

NASA Astrophysics Data System (ADS)

Desai, Aniruddha; Singh, Jugdutt

2010-04-01

Peak and average energy usage in domestic and industrial environments is growing rapidly and absence of detailed energy consumption metrics is making systematic reduction of energy usage very difficult. Smart energy management system aims at providing a cost-effective solution for managing soaring energy consumption and its impact on green house gas emissions and climate change. The solution is based on seamless integration of existing wired and wireless communication technologies combined with smart context-aware software which offers a complete solution for automation of energy measurement and device control. The persuasive software presents users with easy-to-assimilate visual cues identifying problem areas and time periods and encourages a behavioural change to conserve energy. The system allows analysis of real-time/statistical consumption data with the ability to drill down into detailed analysis of power consumption, CO2 emissions and cost. The system generates intelligent projections and suggests potential methods (e.g. reducing standby, tuning heating/cooling temperature, etc.) of reducing energy consumption. The user interface is accessible using web enabled devices such as PDAs, PCs, etc. or using SMS, email, and instant messaging. Successful real-world trial of the system has demonstrated the potential to save 20 to 30% energy consumption on an average. Low cost of deployment and the ability to easily manage consumption from various web enabled devices offers gives this system a high penetration and impact capability offering a sustainable solution to act on climate change today.

76 FR 17755 - Energy Conservation Program for Consumer Products: Decision and Order Granting 180-Day Extension...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-31

... standby mode and off mode energy consumption of those products. The petitioners demonstrated that meeting... energy consumption. 75 FR 64621. More specifically, this test procedure final rule included a standby... ae ) for gas or oil-fired furnaces or boilers and annual electric energy consumption (E e ) for...

Heat-electrical regeneration way to intensive energy saving in an electric arc furnaces

NASA Astrophysics Data System (ADS)

Kartavtcev, S.; Matveev, S.; Neshporenko, E.

2018-03-01

Energy saving in steel production is of great significance for its large economical scale of 1500 mil t/year and high-energy consumption. Steady trend of last years is an increase of steel production in electric arc furnaces (EAF) with a very high consumption of electricity up to 750 kWh/ton. The intention to reduce so much energy consumption they can reach by many ways. One of such way is a transforming heat energy of liquid steel to electricity and destine it to steel electric arc process. Under certain conditions, it may lead to “zero” consumption of electric power in the process. The development of these conditions leads to the formation of energy-efficient heat schemes, with a minimum electricity consumption from the external network.

Using Field-Metered Data to Quantify Annual Energy Use of Portable Air Conditioners

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burke, Thomas; Willem, Henry; Ni, Chun Chun

2014-12-12

As many regions of the United States experience rising temperatures, consumers have come to rely increasingly on cooling appliances (including portable air conditioners) to provide a comfortable indoor temperature. Home occupants sometimes use a portable air conditioner (PAC) to maintain a desired indoor temperature in a single room or enclosed space. Although PACs in residential use are few compared to centrally installed and room air conditioning (AC) units, the past few years have witnessed an increase of PACs use throughout the United States. There is, however, little information and few research projects focused on the energy consumption and performance ofmore » PACs, particularly studies that collect information from field applications of PACs. The operation and energy consumption of PACs may differ among geographic locations and households, because of variations in cooling load, frequency, duration of use, and other user-selected settings. In addition, the performance of building envelope (thermal mass and air leakage) as well as inter-zonal mixing within the building would substantially influence the ability to control and maintain desirable indoor thermal conditions. Lawrence Berkeley National Laboratory (LBNL) conducted an initial field-metering study aimed at increasing the knowledge and data related to PAC operation and energy consumption in the United States. LBNL performed its field-metering study from mid-April to late October 2014. The study, which monitored 19 sites in the Northeastern United States (4 in upstate New York and 15 near Philadelphia), collected real-time data on PAC energy consumption along with information regarding housing characteristics, consumer behavior, and environmental conditions that were expected to affect PAC performance. Given the limited number of test sites, this study was not intended to be statistically representative of PAC users in the United States but rather to understand the system response to the cooling demand and to some extent, the operating hours of the studied units. Specifically, the primary objectives of the field-metering study were to (1) expand knowledge of the installation, energy consumption profiles, consumer patterns of use, and environmental parameters related to PAC use; (2) develop distributions of hours of PAC operation for three operating modes: standby, 1 fan-only, and cooling; and (3) describe how individual consumers’ selection of PAC capacity, the area of the space to be cooled, the temperature set point, and environmental conditions affect energy use. Beginning to understand the energy consumption of PACs operating in American homes and commercial settings will help develop a more accurate energy use profile that characterizes relevant variables. This report on LBNL’s field-metering study of PAC energy use describes: a general definition of a PAC and how it operates (section 2); current practices and sources of data for estimating PAC energy use (section 3); the process LBNL used to select field-metering sites, along with characteristics of the sites and the PACs studied (section 4); data collection methods and instrumentation (section 5); analysis methods (section 6); results and discussion (section 7); and conclusions (section 8).« less

Co-Optimization of Fuels and Engines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farrell, John

2016-04-11

The Co-Optimization of Fuels and Engines (Co-Optima) initiative is a new DOE initiative focused on accelerating the introduction of affordable, scalable, and sustainable biofuels and high-efficiency, low-emission vehicle engines. The simultaneous fuels and vehicles research and development (R&D) are designed to deliver maximum energy savings, emissions reduction, and on-road vehicle performance. The initiative's integrated approach combines the previously independent areas of biofuels and combustion R&D, bringing together two DOE Office of Energy Efficiency & Renewable Energy research offices, ten national laboratories, and numerous industry and academic partners to simultaneously tackle fuel and engine research and development (R&D) to maximize energymore » savings and on-road vehicle performance while dramatically reducing transportation-related petroleum consumption and greenhouse gas (GHG) emissions. This multi-year project will provide industry with the scientific underpinnings required to move new biofuels and advanced engine systems to market faster while identifying and addressing barriers to their commercialization. This project's ambitious, first-of-its-kind approach simultaneously tackles fuel and engine innovation to co-optimize performance of both elements and provide dramatic and rapid cuts in fuel use and emissions. This presentation provides an overview of the initiative and reviews recent progress focused on both advanced spark-ignition and compression-ignition approaches.« less

Emergy-based comparative analysis of energy intensity in different industrial systems.

PubMed

Liu, Zhe; Geng, Yong; Wang, Hui; Sun, Lu; Ma, Zhixiao; Tian, Xu; Yu, Xiaoman

2015-12-01

With the rapid economic development, energy consumption of China has been the second place in the world next to the USA. Usually, measuring energy consumption intensity or efficiency applies heat unit which is joule per gross domestic production (GDP) or coal equivalent per GDP. However, this measuring approach is only oriented by the conversion coefficient of heat combustion which does not match the real value of the materials during their formation in the ecological system. This study applied emergy analysis to evaluate the energy consumption intensity to fill this gap. Emergy analysis is considered as a bridge between ecological system and economic system, which can evaluate the contribution of ecological products and services as well as the load placed on environmental systems. In this study, emergy indicator for performing energy consumption intensity of primary energy was proposed. Industrial production is assumed as the main contributor of energy consumption compared to primary and tertiary industries. Therefore, this study validated this method by investigating the two industrial case studies which were Dalian Economic Development Area (DEDA) and Fuzhou economic and technological area (FETA), to comparatively study on their energy consumption intensity between the different kinds of industrial systems and investigate the reasons behind the differences. The results show that primary energy consumption (PEC) of DEDA was much higher than that of FETA during 2006 to 2010 and its primary energy consumption ratio (PECR) to total emergy involvement had a dramatically decline from year 2006 to 2010. In the same time, nonrenewable energy of PEC in DEDA was also much higher than that in FETA. The reason was that industrial structure of DEDA was mainly formed by heavy industries like petro-chemistry industry, manufacturing industries, and high energy-intensive industries. However, FETA was formed by electronic business, food industry, and light industries. Although the GDP of DEDA was much higher than that of FETA, its energy intensity was higher as well. Through the 5-year development, energy consumption intensity in DEDA made a significant reduction from 3.90E+16 seJ/$ to 1.84E+16 seJ/$, which was attributed by the improvement of industrial structure, construction of eco-industrial park and circular economic industrial park. The proposed emergy indicator for demonstrating energy consumption intensity overcame the weakness that the indicator was only transformed from the heat burning. Therefore, this study shows an optional way to measure energy consumption intensity from the perspective of material ecological contribution.

Quantifying the Consumptive Landscape in the Potomac Watershed Upstream From Washington DC

NASA Astrophysics Data System (ADS)

Kearns, M.; Zegre, N.; Fernandez, R.

2017-12-01

Some of the largest and fastest-growing eastern cities depend upon Appalachian headwaters for their fresh water. Today's relative abundance of water may be at risk: changes in climate and land use could alter the availability of surface water and human consumption could increase to meet the needs of a growing population and economy. Neither the supply of surface water nor the various withdrawals that support our population, irrigation, energy, and industry are distributed uniformly throughout our watersheds. This study correlates surface water withdrawals, consumptive use coefficients, and land-use/land-cover datasets to create a model for quantifying anthropogenic water consumption. The model suggests a method for downscaling and redistributing USGS county-level surface water withdrawals to 30 meter cells. Initially completed for the Potomac River watershed upstream from Washington DC's public supply intake, this approach could easily scale regionally or nationally. When combined with runoff estimates over the same landscape, the net-production or net-consumption of an area of interest may be calculated at high resolution. By better understanding the spatial relationship between hydrologic supply and demand, we can seek to improve the efficiency and security of our water resources.

Performance of Introducing Outdoor Cold Air for Cooling a Plant Production System with Artificial Light

PubMed Central

Wang, Jun; Tong, Yuxin; Yang, Qichang; Xin, Min

2016-01-01

The commercial use of a plant production system with artificial light (PPAL) is limited by its high initial construction and operation costs. The electric-energy consumed by heat pumps, applied mainly for cooling, accounts for 15–35% of the total electric-energy used in a PPAL. To reduce the electric-energy consumption, an air exchanger with low capacity (180 W) was used for cooling by introducing outdoor cold air. In this experiment, the indoor air temperature in two PPALs (floor area: 6.2 m2 each) was maintained at 25 and 20°C during photoperiod and dark period, respectively, for lettuce production. A null CO2 balance enrichment method was used in both PPALs. In one PPAL (PPALe), an air exchanger (air flow rate: 250 m3·h−1) was used along with a heat pump (cooling capacity: 3.2 kW) to maintain the indoor air temperature at the set-point. The other PPAL (PPALc) with only a heat pump (cooling capacity: 3.2 kW) was used for reference. Effects of introducing outdoor cold air on energy use efficiency, coefficient of performance (COP), electric-energy consumption for cooling and growth of lettuce were investigated. The results show that: when the air temperature difference between indoor and outdoor ranged from 20.2 to 30.0°C: (1) the average energy use efficiency of the air exchanger was 2.8 and 3.4 times greater than the COP of the heat pumps in the PPALe and PPALc, respectively; (2) hourly electric-energy consumption for cooling in the PPALe reduced by 15.8–73.7% compared with that in the PPALc; (3) daily supply of CO2 in the PPALe reduced from 0.15 to 0.04 kg compared with that in the PPALc with the outdoor air temperature ranging from −5.6 to 2.7°C; (4) no significant difference in lettuce growth was observed in both PPALs. The results indicate that using air exchanger to introduce outdoor cold air should be considered as an effective way to reduce electric-energy consumption for cooling with little effects on plant growth in a PPAL. PMID:27066012

An Energy-Efficient Mobile Sink-Based Unequal Clustering Mechanism for WSNs.

PubMed

Gharaei, Niayesh; Abu Bakar, Kamalrulnizam; Mohd Hashim, Siti Zaiton; Hosseingholi Pourasl, Ali; Siraj, Mohammad; Darwish, Tasneem

2017-08-11

Network lifetime and energy efficiency are crucial performance metrics used to evaluate wireless sensor networks (WSNs). Decreasing and balancing the energy consumption of nodes can be employed to increase network lifetime. In cluster-based WSNs, one objective of applying clustering is to decrease the energy consumption of the network. In fact, the clustering technique will be considered effective if the energy consumed by sensor nodes decreases after applying clustering, however, this aim will not be achieved if the cluster size is not properly chosen. Therefore, in this paper, the energy consumption of nodes, before clustering, is considered to determine the optimal cluster size. A two-stage Genetic Algorithm (GA) is employed to determine the optimal interval of cluster size and derive the exact value from the interval. Furthermore, the energy hole is an inherent problem which leads to a remarkable decrease in the network's lifespan. This problem stems from the asynchronous energy depletion of nodes located in different layers of the network. For this reason, we propose Circular Motion of Mobile-Sink with Varied Velocity Algorithm (CM2SV2) to balance the energy consumption ratio of cluster heads (CH). According to the results, these strategies could largely increase the network's lifetime by decreasing the energy consumption of sensors and balancing the energy consumption among CHs.

Energy consumption of agitators in activated sludge tanks - actual state and optimization potential.

PubMed

Füreder, K; Svardal, K; Frey, W; Kroiss, H; Krampe, J

2018-02-01

Depending on design capacity, agitators consume about 5 to 20% of the total energy consumption of a wastewater treatment plant. Based on inhabitant-specific energy consumption (kWh PE 120 -1 a -1 ; PE 120 is population equivalent, assuming 120 g chemical oxygen demand per PE per day), power density (W m -3 ) and volume-specific energy consumption (Wh m -3 d -1 ) as evaluation indicators, this paper provides a sound contribution to understanding energy consumption and energy optimization potentials of agitators. Basically, there are two ways to optimize agitator operation: the reduction of the power density and the reduction of the daily operating time. Energy saving options range from continuous mixing with low power densities of 1 W m -3 to mixing by means of short, intense energy pulses (impulse aeration, impulse stirring). However, the following correlation applies: the shorter the duration of energy input, the higher the power density on the respective volume-specific energy consumption isoline. Under favourable conditions with respect to tank volume, tank geometry, aeration and agitator position, mixing energy can be reduced to 24 Wh m -3 d -1 and below. Additionally, it could be verified that power density of agitators stands in inverse relation to tank volume.

The Mass Flux of Non-renewable Energy for Humanity

NASA Astrophysics Data System (ADS)

Solomon, Edwin

The global energy supply relies on non-renewable energy sources, coal, crude oil, and natural gas, along with nuclear power from uranium and these finite resources are located within the upper few kilometers of the Earth's crust. The total quantity of non-renewable energy resources consumed relative to the total quantity available is an essential question facing humanity. Analyses of energy consumption was conducted for the period 1800--2014 using data from the U. S. Energy Information Administration (EIA) and World Energy Production, 1800--1985 to determine the balance between non-renewable energy resources consumed and ultimately recoverable reserves. Annual energy consumption was plotted for each non-renewable resource followed by analyses to determine annual growth rates of consumption. Results indicated total energy consumption grew approximately exponentially 3.6% per year from 1800--1975 and was linear from 1975--2014. The ultimately recoverable reserves (URR) plus the total quantity consumed to date equals the total energy resource reserve prior to exploitation (7.15 x 1018 grams). Knowing the original resource quantity and the annual consumption and growth rates, we can forecast the duration of remaining resources using different scenarios. Alternatively, we can use population growth models and consumption trends to determine the per capita allocation trends and model that into the future. Alternative modeling of future resource allocation on a per capita bases suggests that resource lifetime may be significantly less than that predicted from consumption and production dynamics alone.

Caffeine Consumption Among Naval Aviation Candidates.

PubMed

Sather, Thomas E; Williams, Ronald D; Delorey, Donald R; Woolsey, Conrad L

2017-04-01

Education frequently dictates students need to study for prolonged periods of time to adequately prepare for examinations. This is especially true with aviation preflight indoctrination (API) candidates who have to assimilate large volumes of information in a limited amount of time during API training. The purpose of this study was to assess caffeine consumption patterns (frequency, type, and volume) among naval aviation candidates attending API to determine the most frequently consumed caffeinated beverage and to examine if the consumption of a nonenergy drink caffeinated beverage was related to energy drink consumption. Data were collected by means of an anonymous 44-item survey administered and completed by 302 students enrolled in API at Naval Air Station Pensacola, FL. Results indicated the most frequently consumed caffeinated beverage consumed by API students was coffee (86.4%), with daily coffee consumption being approximately 28% and the most frequent pattern of consumption being 2 cups per day (85%). The least frequently consumed caffeinated beverages reported were energy drinks (52%) and energy shots (29.1%). The present study also found that the consumption patterns (weekly and daily) of caffeinated beverages (coffee and cola) were positively correlated to energy drink consumption patterns. Naval aviation candidates' consumption of caffeinated beverages is comparable to other college and high school cohorts. This study found that coffee and colas were the beverages of choice, with energy drinks and energy shots being the least frequently reported caffeinated beverages used. Additionally, a relationship between the consumption of caffeinated beverages and energy drinks was identified.Sather TE, Williams RD, Delorey DR, Woolsey CL. Caffeine consumption among naval aviation candidates. Aerosp Med Hum Perform. 2017; 88(4):399-405.

Housing characteristics 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-06-01

This report, Housing Characteristics 1993, presents statistics about the energy-related characteristics of US households. These data were collected in the 1993 Residential Energy Consumption Survey (RECS) -- the ninth in a series of nationwide energy consumption surveys conducted since 1978 by the Energy Information Administration of the US Department of Energy. Over 7 thousand households were surveyed, representing 97 million households nationwide. A second report, to be released in late 1995, will present statistics on residential energy consumption and expenditures.

A Case of Acute Psychosis Following Energy Drink Consumption

PubMed Central

GÖRGÜLÜ, Yasemin; TAŞDELEN, Öznur; SÖNMEZ, Mehmet Bülent; KÖSE ÇINAR, Rugül

2014-01-01

Interest in energy drinks is increasing every day. Energy drink consumption is increasing proportionally. Users often utilize these drinks in order to enjoy, have fun and to increase performance and attention. However, consumption of the energy drinks sometimes may also cause adverse physical and psychological consequences. Unwanted physical results are in the more foreground, noticeable and visible but the data about psychological problems caused by energy drinks is accumulated over the years in the literature. In this case report, we describe the case of a young man with no psychiatric history who was hospitalized for psychotic symptoms following excessive consumption of energy drinks. PMID:28360600

Life cycle assessment of central softening of very hard drinking water.

PubMed

Godskesen, B; Hauschild, M; Rygaard, M; Zambrano, K; Albrechtsen, H-J

2012-08-30

Many consumers prefer softened water due to convenience issues such as avoidance of removing limescale deposits from household appliances and surfaces, and to reduce consumption of cleaning agents and laundry detergents leading to lower household expenses. Even though central softening of drinking water entailed an increased use of energy, sand and chemicals at the waterworks, the distributed and softened drinking water supported a decrease in consumption of energy and chemical agents in the households along with a prolonged service life of household appliances which heat water. This study used Life Cycle Assessment (LCA) to quantify the environmental impacts of central softening of drinking water considering both the negative effects at the waterworks and the positive effects imposed by the changed water quality in the households. The LCA modeling considered central softening of drinking water from the initial hardness of the region of study (Copenhagen, Denmark) which is 362 mg/L as CaCO(3) to a final hardness as CaCO(3) of 254 (a softening depth of 108) mg/L or 145 (a softening depth of 217) mg/L. Our study showed that the consumer preference can be met together with reducing the impact on the environment and the resource consumption. Environmental impacts decreased by up to 3 mPET (milli Personal Equivalent Targeted) and the break-even point from where central softening becomes environmentally beneficial was reached at a softening depth of only 22 mg/L as CaCO(3). Both energy-related and chemically related environmental impacts were reduced as well as the consumption of resources. Based on scarcity criteria, nickel was identified as the most problematic non-renewable resource in the system, and savings of up to 8 mPR (milli Person Reserve) were found. Copyright © 2012 Elsevier Ltd. All rights reserved.

Technical assessment of maglev system concepts. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lever, J.H.

1998-10-01

The Government Maglev System Assessment Team operated from 1991 to 1993 as part of the National Maglev Initiative. They assessed the technical viability of four US Maglev system concepts, using the French TGV high speed train and the German TR07 Maglev system as assessment baselines. Maglev in general offers advantages that include high speed potential, excellent system control, high capacity, low energy consumption, low maintenance, modest land requirements, low operating costs, and ability to meet a variety of transportation missions. Further, the US Maglev concepts could provide superior performance to TR07 for similar cost or similar performance for less cost.more » They also could achieve both lower trip times and lower energy consumption along typical US routes. These advantages result generally from the use of large gap magnetic suspensions, more powerful linear synchronous motors and tilting vehicles. Innovative concepts for motors, guideways, suspension, and superconducting magnets all contribute to a potential for superior long term performance of US Maglev systems compared with TGV and TR07.« less

Are shocks to renewable energy consumption permanent or temporary? Evidence from 54 developing and developed countries.

PubMed

Demir, Ender; Gozgor, Giray

2018-02-01

The renewable energy sources are considered as the important factor to decrease the level of carbon emissions and to promote the global green economy. Understanding the dynamics of renewable energy consumption, this paper analyzes whether there is a unit root in renewable energy consumption in 54 countries over the period 1971-2016. To this end, the unit root test of Narayan-Popp with two endogenous (unknown) breaks is implemented. The paper finds that renewable energy consumption series are stationary around a level and the time trend in 45 of 54 countries. In other words, renewable energy consumption follows a unit root process only in nine countries: Brazil, China, Colombia, India, Israel, Japan, the Netherlands, Spain, and Turkey. The evidence implies that renewable energy demand policies, which aimed to decrease the carbon emissions, will only have permanent effects in those nine countries.

Deep influence of passive low energy consumption multi-storey residential building in cold region

NASA Astrophysics Data System (ADS)

Shuai, Zhang; Lihua, Zhao; Rong, Jin; Dong, Junyan

2018-02-01

The example of passive architecture demonstration building in Jilin Province, China, based on the practical experience of this project, the control index of passive and low energy consumption residential buildings in cold and passive buildings is referenced by reference to the German construction standard and the Chinese residence construction document, “passive ultra-low energy consumption green Building Technology Guide (Trial)”. The requirement of passive low energy residential buildings on the ground heat transfer coefficient limits is determined, and the performance requirements of passive residential buildings are discussed. This paper analyzes the requirement of the passive low energy residential building on the ground heat transfer coefficient limit, and probes into the influence factors of the ground thermal insulation of the passive low energy consumption residential building. The construction method of passive low energy consumption residential building is proposed.

Building Energy Consumption Pattern Analysis of Detached Housing for the Policy Decision Simulator

NASA Astrophysics Data System (ADS)

Lim, Jiyoun; Lee, Seung-Eon

2018-03-01

The Korean government announced its plan to raise the previous reduction goal of greenhouse gas emission from buildings by 26.9% until 2020 on July 2015. Therefore, policies regarding efficiency in the building energy are implemented fast, but the level of building owners and market understanding is low in general, and the government service system which supports decision making for implementing low-energy buildings has not been provided yet. The purpose of this study is to present the design direction for establishing user customized building energy database to perform a role to provide autonomous ecosystem of low-energy buildings. In order to reduce energy consumption in buildings, it is necessary to carry out the energy performance analysis based on the characteristics of target building. By analysing about 20-thousand cases of the amount of housing energy consumption in Korea, this study suggested the real energy consumption pattern by building types. Also, the energy performance of a building could be determined by energy consumption, but previous building energy consumption analysis programs required expert knowledge and experience in program usage, so it was difficult for normal building users to use such programs. Therefore, a measure to provide proper default using the level of data which general users with no expert knowledge regarding building energy could enter easily was suggested in this study.

75 FR 52049 - Notice of Projects Approved for Consumptive Uses of Water

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-24

....; Consumptive Use of up to 4.990 mgd; Approval Date: July 6, 2010. 3. Talisman Energy USA, Inc.; Pad ID: Shedden... County, Pa.; Consumptive Use of up to 4.000 mgd; Approval Date: July 7, 2010. 10. Talisman Energy USA....; Consumptive Use of up to 7.500 mgd; Approval Date: July 9, 2010. 20. Talisman Energy USA, Inc.; Pad ID: Nolt...

Respiration, respiratory metabolism and energy consumption under weightless conditions

NASA Technical Reports Server (NTRS)

Kasyan, I. I.; Makarov, G. F.

1975-01-01

Changes in the physiological indices of respiration, respiratory metabolism and energy consumption in spacecrews under weightlessness conditions manifest themselves in increased metabolic rates, higher pulmonary ventilation volume, oxygen consumption and carbon dioxide elimination, energy consumption levels in proportion to reduction in neuroemotional and psychic stress, adaptation to weightlessness and work-rest cycles, and finally in a relative stabilization of metabolic processes due to hemodynamic shifts.

Fossil energy consumption and greenhouse gas emissions, including soil carbon effects, of producing agriculture and forestry feedstocks

Treesearch

Christina E. Canter; Zhangcai Qin; Hao Cai; Jennifer B. Dunn; Michael Wang; D. Andrew Scott

2017-01-01

The GHG emissions and fossil energy consumption associated with producing potential biomass sup­ply in the select BT16 scenarios include emissions and energy consumption from biomass production, harvest/collection, transport, and pre-processing activities to the reactor throat. Emissions associated with energy, fertilizers, and...

75 FR 57937 - Energy Conservation Program for Consumer Products: Notice of Petition for Waiver of Samsung...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-23

... determining the energy consumption of clothes washers. Today's notice also grants an interim waiver of the... evaluate the basic model in a manner so unrepresentative of its true energy consumption characteristics as... manner representative of its energy consumption. 10 CFR 430.27(b)(1)(iii). The Assistant Secretary may...

Planning Strategies for Transportation Fuel Consumption Reduction: An Evaluation of the Hawaii Clean Energy Initiative’s Transportation Plan

DTIC Science & Technology

2014-04-01

technologies to improve fleet efficiency goals, and evaluate switching to biodiesel for trucks and vehicles without other alternatives (HCEI 2011...standards and biodiesel usage levels 2020 Goal 50 MGY of renewable fuels 28 working with industry to increase EV market penetration, and...Strategy Reduction Potential Purchase more efficient vehicles 10-20% Promote hybrid technologies 10-20% Evaluate biodiesel switching (freight) TBD

Highway Fuel Consumption Computer Model (Version 1)

DOT National Transportation Integrated Search

1974-04-01

A highway fuel consumption computer model is given. The model allows the computation of fuel consumption of a highway vehicle class as a function of time. The model is of the initial value (in this case initial inventory) and lumped parameter type. P...

Influence of air temperature on electric consumption in Moscow

NASA Astrophysics Data System (ADS)

Lokoshchenko, Mikhail A.; Nikolayeva, Nataliya A.

2017-04-01

For the first time for mid latitudes and with the use of long-term data of Moscow State University Meteorological observatory a dependence of electric power consumption E on the air temperature T has been studied for each separate day for the period from 1990 to 2015 (totally - 9496 values). As a result, it is shown that the relation is in general decreasing in conditions of cold Moscow region: energy consumption as a rule reduces with a rise of the temperature. However, in time of severe frosts the energy consumption increasing goes to nothing due to special measures for energy savings whereas during heat wave episodes of extremely hot weather (especially in summer of 2010) an opposite tendency appears to the energy consumption increase with the increase of the air temperature due to additional consumption for the air conditioning. This relation between E and T is statistically significant with extremely high confidence probability (more than 0.999). The optimum temperature for the energy saving is 18 ˚C. The air temperature limit values in Moscow during last decades have been discussed. Daily-averaged T varied from -28.0 ˚C in January of 2006 to +31.4 ˚C in August of 2010 so a range of this parameter is almost 60 ˚C. Catastrophic heat wave in 2010 appeared as a secondary summer maximum of the electric consumption annual course. The relation between E and T for separate years demonstrates strong weekly periodicity at the dynamics of E daily values. As a result statistical distribution of E daily values for separate years is bimodal. One its mode is connected with working-days and another one - with non-work days (Saturday, Sunday and holidays) when consumption is much less. In recent time weekly cycle at the electric consumption became weaker due to total fall of industry in Moscow. In recent years the dependence of energy consumption on the air temperature generally became stronger - probably due to changes of its structure (growth of non-industrial users' contribution). A relation of energy consumption with the relative humidity is absent whereas a relation of energy consumption with the water vapor pressure e indirectly reflects a dependence of this parameter on the air temperature. Use of multiple and partial correlation between E, T and e confirmed an absence of direct relation between energy consumption and water vapor pressure. Authors are much grateful to System Operator of Unified Energy System of Russia for given data about electric power consumption in Moscow region.

Co-Optimization of Fuels and Engines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farrell, John

2016-03-24

The Co-Optimization of Fuels and Engines (Co-Optima) initiative is a new DOE initiative focused on accelerating the introduction of affordable, scalable, and sustainable biofuels and high-efficiency, low-emission vehicle engines. The simultaneous fuels and vehicles research and development (R&D) are designed to deliver maximum energy savings, emissions reduction, and on-road vehicle performance. The initiative's integrated approach combines the previously independent areas of biofuels and combustion R&D, bringing together two DOE Office of Energy Efficiency & Renewable Energy research offices, ten national laboratories, and numerous industry and academic partners to simultaneously tackle fuel and engine research and development (R&D) to maximize energymore » savings and on-road vehicle performance while dramatically reducing transportation-related petroleum consumption and greenhouse gas (GHG) emissions. This multi-year project will provide industry with the scientific underpinnings required to move new biofuels and advanced engine systems to market faster while identifying and addressing barriers to their commercialization. This project's ambitious, first-of-its-kind approach simultaneously tackles fuel and engine innovation to co-optimize performance of both elements and provide dramatic and rapid cuts in fuel use and emissions. This presentation provides an overview of the project.« less

Providing Personalized Energy Management and Awareness Services for Energy Efficiency in Smart Buildings.

PubMed

Fotopoulou, Eleni; Zafeiropoulos, Anastasios; Terroso-Sáenz, Fernando; Şimşek, Umutcan; González-Vidal, Aurora; Tsiolis, George; Gouvas, Panagiotis; Liapis, Paris; Fensel, Anna; Skarmeta, Antonio

2017-09-07

Considering that the largest part of end-use energy consumption worldwide is associated with the buildings sector, there is an inherent need for the conceptualization, specification, implementation, and instantiation of novel solutions in smart buildings, able to achieve significant reductions in energy consumption through the adoption of energy efficient techniques and the active engagement of the occupants. Towards the design of such solutions, the identification of the main energy consuming factors, trends, and patterns, along with the appropriate modeling and understanding of the occupants' behavior and the potential for the adoption of environmentally-friendly lifestyle changes have to be realized. In the current article, an innovative energy-aware information technology (IT) ecosystem is presented, aiming to support the design and development of novel personalized energy management and awareness services that can lead to occupants' behavioral change towards actions that can have a positive impact on energy efficiency. Novel information and communication technologies (ICT) are exploited towards this direction, related mainly to the evolution of the Internet of Things (IoT), data modeling, management and fusion, big data analytics, and personalized recommendation mechanisms. The combination of such technologies has resulted in an open and extensible architectural approach able to exploit in a homogeneous, efficient and scalable way the vast amount of energy, environmental, and behavioral data collected in energy efficiency campaigns and lead to the design of energy management and awareness services targeted to the occupants' lifestyles. The overall layered architectural approach is detailed, including design and instantiation aspects based on the selection of set of available technologies and tools. Initial results from the usage of the proposed energy aware IT ecosystem in a pilot site at the University of Murcia are presented along with a set of identified open issues for future research.

Providing Personalized Energy Management and Awareness Services for Energy Efficiency in Smart Buildings

PubMed Central

Fotopoulou, Eleni; Tsiolis, George; Gouvas, Panagiotis; Liapis, Paris; Fensel, Anna; Skarmeta, Antonio

2017-01-01

Considering that the largest part of end-use energy consumption worldwide is associated with the buildings sector, there is an inherent need for the conceptualization, specification, implementation, and instantiation of novel solutions in smart buildings, able to achieve significant reductions in energy consumption through the adoption of energy efficient techniques and the active engagement of the occupants. Towards the design of such solutions, the identification of the main energy consuming factors, trends, and patterns, along with the appropriate modeling and understanding of the occupants’ behavior and the potential for the adoption of environmentally-friendly lifestyle changes have to be realized. In the current article, an innovative energy-aware information technology (IT) ecosystem is presented, aiming to support the design and development of novel personalized energy management and awareness services that can lead to occupants’ behavioral change towards actions that can have a positive impact on energy efficiency. Novel information and communication technologies (ICT) are exploited towards this direction, related mainly to the evolution of the Internet of Things (IoT), data modeling, management and fusion, big data analytics, and personalized recommendation mechanisms. The combination of such technologies has resulted in an open and extensible architectural approach able to exploit in a homogeneous, efficient and scalable way the vast amount of energy, environmental, and behavioral data collected in energy efficiency campaigns and lead to the design of energy management and awareness services targeted to the occupants’ lifestyles. The overall layered architectural approach is detailed, including design and instantiation aspects based on the selection of set of available technologies and tools. Initial results from the usage of the proposed energy aware IT ecosystem in a pilot site at the University of Murcia are presented along with a set of identified open issues for future research. PMID:28880227

Balancing energy consumption with hybrid clustering and routing strategy in wireless sensor networks.

PubMed

Xu, Zhezhuang; Chen, Liquan; Liu, Ting; Cao, Lianyang; Chen, Cailian

2015-10-20

Multi-hop data collection in wireless sensor networks (WSNs) is a challenge issue due to the limited energy resource and transmission range of wireless sensors. The hybrid clustering and routing (HCR) strategy has provided an effective solution, which can generate a connected and efficient cluster-based topology for multi-hop data collection in WSNs. However, it suffers from imbalanced energy consumption, which results in the poor performance of the network lifetime. In this paper, we evaluate the energy consumption of HCR and discover an important result: the imbalanced energy consumption generally appears in gradient k = 1, i.e., the nodes that can communicate with the sink directly. Based on this observation, we propose a new protocol called HCR-1, which includes the adaptive relay selection and tunable cost functions to balance the energy consumption. The guideline of setting the parameters in HCR-1 is provided based on simulations. The analytical and numerical results prove that, with minor modification of the topology in Sensors 2015, 15 26584 gradient k = 1, the HCR-1 protocol effectively balances the energy consumption and prolongs the network lifetime.

[Relationships between settlement morphology transition and residents commuting energy consumption].

PubMed

Zhou, Jian; Xiao, Rong-Bo; Sun, Xiang

2013-07-01

Settlement morphology transition is triggered by rapid urbanization and urban expansion, but its relationships with residents commuting energy consumption remains ambiguous. It is of significance to understand the controlling mechanisms of sustainable public management policies on the energy consumption and greenhouse gases emission during the process of urban settlement morphology transition. Taking the Xiamen City of East China as a case, and by using the integrated land use and transportation modeling system TRANUS, a scenario analysis was made to study the effects of urban settlement morphology transition on the urban spatial distribution of population, jobs, and land use, and on the residents commuting energy consumption and greenhouse gasses emission under different scenarios. The results showed that under the Business As Usual (BAU) scenario, the energy consumption of the residents at the morning peak travel time was 54.35 tce, and the CO2 emission was 119.12 t. As compared with those under BAU scenario, both the energy consumption and the CO2 emission under the Transition of Settlement Morphology (TSM) scenario increased by 12%, and, with the implementation of the appropriate policies such as land use, transportation, and economy, the energy consumption and CO2 emission under the Transition of Settlement Morphology with Policies (TSMP) scenario reduced by 7%, indicating that urban public management policies could effectively control the growth of residents commuting energy consumption and greenhouse gases emission during the period of urban settlement morphology transition.

Predictors of changes in adolescents' consumption of fruits, vegetables and energy-dense snacks.

PubMed

Pearson, Natalie; Ball, Kylie; Crawford, David

2011-03-01

Understanding the predictors of developmental changes in adolescent eating behaviours is important for the design of nutrition interventions. The present study examined associations between individual, social and physical environmental factors and changes in adolescent eating behaviours over 2 years. Consumption of fruits, vegetables and energy-dense snacks was assessed using a Web-based survey completed by 1850 adolescents from years 7 and 9 of secondary schools in Victoria, Australia, at baseline and 2 years later. Perceived value of healthy eating, self-efficacy for healthy eating, social modelling and support, and home availability and accessibility of foods were assessed at baseline. Self-efficacy for increasing fruit consumption was positively associated with the change in fruit and vegetable consumption, while self-efficacy for decreasing junk food consumption was inversely associated with the change in energy-dense snack consumption. Home availability of energy-dense foods was inversely associated with the change in fruit consumption and positively associated with the change in energy-dense snack consumption, while home availability of fruits and vegetables was positively associated with the change in vegetable consumption. Perceived value of healthy eating and modelling of healthy eating by mothers were positively associated with the change in fruit consumption. Support of best friends for healthy eating was positively associated with the change in vegetable consumption. Self-efficacy and home availability of foods appear to be consistent predictors of change in fruit, vegetable and energy-dense snack consumption. Future study should assess the effectiveness of methods to increase self-efficacy for healthy eating and to improve home availability of healthy food options in programmes promoting healthy eating among adolescents.

Evaluating the effect of energy-dense foods consumption on preschool children's body mass index: a prospective analysis from 2 to 4 years of age.

PubMed

Durão, Catarina; Severo, Milton; Oliveira, Andreia; Moreira, Pedro; Guerra, António; Barros, Henrique; Lopes, Carla

2015-08-01

The aim of this study was to study the association between the consumption of energy-dense foods at 2 years and body mass index (BMI) at 4 years, using a cross-lagged panel design. The present study included 589 children evaluated at 2 and 4 years of age, as part of the birth cohort generation XXI. Information was obtained by face-to-face interviews. Consumption of energy-dense foods (salty snacks, soft drinks, cakes, and sweets) was measured using a food frequency questionnaire. Children's weight and height were measured by standard procedures, and BMI standard deviation scores (BMI z-scores) were calculated according to the World Health Organization. Linear regression and cross-lagged panel design models were fitted to estimate the associations between the consumption of energy-dense foods and BMI z-scores (controlled for maternal age, education and prepregnancy BMI, and children's exact age at 2 years). The consumption of energy-dense foods at 2 years was significantly associated with their consumption at 4 years (β = 0.522, 95% CI 0.432-0.612). Children's BMI z-scores at 2 years were associated with posterior BMI z-scores (β = 0.747, 95% CI 0.688-0.806). In the cross-lagged analysis, consumption of energy-dense foods at 2 years had no effect on subsequent BMI z-scores (β = -0.030, 95% CI -0.095 to 0.035) and BMI z-scores at 2 years were not significantly associated with the consumption of energy-dense foods at 4 years (β = -0.012, 95% CI -0.086 to 0.062). Consumption of energy-dense foods and BMI tracked over time, but the consumption of energy-dense foods at 2 years was not associated with BMI z-scores at 4 years.

Dynamic modeling of potentially conflicting energy reduction strategies for residential structures in semi-arid climates.

PubMed

Hester, Nathan; Li, Ke; Schramski, John R; Crittenden, John

2012-04-30

Globally, residential energy consumption continues to rise due to a variety of trends such as increasing access to modern appliances, overall population growth, and the overall increase of electricity distribution. Currently, residential energy consumption accounts for approximately one-fifth of total U.S. energy consumption. This research analyzes the effectiveness of a range of energy-saving measures for residential houses in semi-arid climates. These energy-saving measures include: structural insulated panels (SIP) for exterior wall construction, daylight control, increased window area, efficient window glass suitable for the local weather, and several combinations of these. Our model determined that energy consumption is reduced by up to 6.1% when multiple energy savings technologies are combined. In addition, pre-construction technologies (structural insulated panels (SIPs), daylight control, and increased window area) provide roughly 4 times the energy savings when compared to post-construction technologies (window blinds and efficient window glass). The model also illuminated the importance variations in local climate and building configuration; highlighting the site-specific nature of this type of energy consumption quantification for policy and building code considerations. Published by Elsevier Ltd.

Energy consumption and CO2 emissions in Iran, 2025.

PubMed

Mirzaei, Maryam; Bekri, Mahmoud

2017-04-01

Climate change and global warming as the key human societies' threats are essentially associated with energy consumption and CO 2 emissions. A system dynamic model was developed in this study to model the energy consumption and CO 2 emission trends for Iran over 2000-2025. Energy policy factors are considered in analyzing the impact of different energy consumption factors on environmental quality. The simulation results show that the total energy consumption is predicted to reach 2150 by 2025, while that value in 2010 is 1910, which increased by 4.3% yearly. Accordingly, the total CO 2 emissions in 2025 will reach 985million tonnes, which shows about 5% increase yearly. Furthermore, we constructed policy scenarios based on energy intensity reduction. The analysis show that CO 2 emissions will decrease by 12.14% in 2025 compared to 2010 in the scenario of 5% energy intensity reduction, and 17.8% in the 10% energy intensity reduction scenario. The results obtained in this study provide substantial awareness regarding Irans future energy and CO 2 emission outlines. Copyright © 2017 Elsevier Inc. All rights reserved.

Electrooxidation of industrial wastewater containing 1,4-dioxane in the presence of different salts.

PubMed

Barndõk, H; Hermosilla, D; Cortijo, L; Torres, E; Blanco, A

2014-04-01

The treatment of 1,4-dioxane solution by electrochemical oxidation on boron-doped diamond was studied using a central composite design and the response surface methodology to investigate the use of SO4 (2-) and HCO3 (-) as supporting electrolytes considering the applied electric current, initial chemical oxygen demand (COD) value, and treatment time. Two industrial effluents containing bicarbonate alkalinity, one just carrying 1,4-dioxane (S1), and another one including 1,4-dioxane and 2-methyl-1,3-dioxolane (S2), were treated under optimized conditions and subsequently subjected to biodegradability assays with a Pseudomonas putida culture. Electrooxidation was compared with ozone oxidation (O3) and its combination with hydrogen peroxide (O3/H2O2). Regarding the experimental design, the optimal compromise for maximum COD removal at minimum energy consumption was shown at the maximum tested concentrations of SO4 (2-) and HCO3 (-) (41.6 and 32.8 mEq L(-1), respectively) and the maximum selected initial COD (750 mg L(-1)), applying a current density of 11.9 mA cm(-2) for 3.8 h. Up to 98 % of the COD was removed in the electrooxidation treatment of S1 effluent using 114 kWh per kg of removed COD and about 91 % of the COD from S2 wastewater applying 49 kWh per kg of removed COD. The optimal biodegradability enhancement was achieved after 1 h of electrooxidation treatment. In comparison with O3 and O3/H2O2 alternatives, electrochemical oxidation achieved the fastest degradation rate per oxidant consumption unit, and it also resulted to be the most economical treatment in terms of energy consumption and price per unit of removed COD.

Factors affecting wood energy consumption by U.S. households

Treesearch

Nianfu Song; Francisco X. Aguilar; Stephen R. Shifley; Michael E. Goerndt

2012-01-01

About 23% of energy derived from woody sources in the U.S. was consumed by households, of which 70% was used by households in rural areas in 2005. We investigated factors affecting household-level wood energy consumption in the four continental U.S. regions using data from the U.S. Residential Energy Consumption Survey. To account for a large number of zero...

Energy consumption and energy-saving potential analysis of pollutant abatement systems in a 1000MW coal-fired power plant.

PubMed

Yang, Hang; Zhang, Yongxin; Zheng, Chenghang; Wu, Xuecheng; Chen, Linghong; Gao, Xiang; Fu, Joshua S

2018-05-10

The pollutant abatement systems are widely applied in the coal-fired power sector and the energy consumption was considered an important part of the auxiliary power. An energy consumption analysis and assessment model of pollutant abatement systems in a power unit was developed based on the dynamic parameters and technology. The energy consumption of pollutant abatement systems in a 1000 MW coal-fired power unit which meet the ultra-low emission limits and the factors of operating parameters including unit load and inlet concentration of pollutants on the operating power were analyzed. The results show that the total power consumption of the pollutant abatement systems accounted for 1.27% of the gross power generation during the monitoring period. The WFGD system consumed 67% of the rate while the SCR and ESP systems consumed 8.9% and 24.1%. The power consumption rate of pollutant abatement systems decreased with the increase of unit load and increased with the increase of the inlet concentration of pollutants. The operation adjustment was also an effective method to increase the energy efficiency. For example, the operation adjustment of slurry circulation pumps could promote the energy-saving operation of WFGD system. Implication Statement The application of pollutant abatement technologies increases the internal energy consumption of the power plant, which will lead to an increase of power generation costs. The real-time energy consumption of the different pollutant abatement systems in a typical power unit is analyzed based on the dynamic operating data. Further, the influence of different operating parameters on the operating power of the system and the possible energy-saving potential are analyzed.

A Novel Cost Based Model for Energy Consumption in Cloud Computing

PubMed Central

Horri, A.; Dastghaibyfard, Gh.

2015-01-01

Cloud data centers consume enormous amounts of electrical energy. To support green cloud computing, providers also need to minimize cloud infrastructure energy consumption while conducting the QoS. In this study, for cloud environments an energy consumption model is proposed for time-shared policy in virtualization layer. The cost and energy usage of time-shared policy were modeled in the CloudSim simulator based upon the results obtained from the real system and then proposed model was evaluated by different scenarios. In the proposed model, the cache interference costs were considered. These costs were based upon the size of data. The proposed model was implemented in the CloudSim simulator and the related simulation results indicate that the energy consumption may be considerable and that it can vary with different parameters such as the quantum parameter, data size, and the number of VMs on a host. Measured results validate the model and demonstrate that there is a tradeoff between energy consumption and QoS in the cloud environment. Also, measured results validate the model and demonstrate that there is a tradeoff between energy consumption and QoS in the cloud environment. PMID:25705716

A novel cost based model for energy consumption in cloud computing.

PubMed

Horri, A; Dastghaibyfard, Gh

2015-01-01

Cloud data centers consume enormous amounts of electrical energy. To support green cloud computing, providers also need to minimize cloud infrastructure energy consumption while conducting the QoS. In this study, for cloud environments an energy consumption model is proposed for time-shared policy in virtualization layer. The cost and energy usage of time-shared policy were modeled in the CloudSim simulator based upon the results obtained from the real system and then proposed model was evaluated by different scenarios. In the proposed model, the cache interference costs were considered. These costs were based upon the size of data. The proposed model was implemented in the CloudSim simulator and the related simulation results indicate that the energy consumption may be considerable and that it can vary with different parameters such as the quantum parameter, data size, and the number of VMs on a host. Measured results validate the model and demonstrate that there is a tradeoff between energy consumption and QoS in the cloud environment. Also, measured results validate the model and demonstrate that there is a tradeoff between energy consumption and QoS in the cloud environment.

Energy drink consumption in children and early adolescents.

PubMed

Gallimberti, Luigi; Buja, Alessandra; Chindamo, Sonia; Vinelli, Angela; Lazzarin, Gianna; Terraneo, Alberto; Scafato, Emauele; Baldo, Vincenzo

2013-10-01

The aim of this study was to investigate the prevalence of energy drink consumption in children and very young adolescents and to study the sociodemographic and environmental-behavioral factors associated with regular, at least once a week, energy drink consumption in early adolescence. This survey was conducted during the 2011-2012 school year in the Province of Rovigo, in the Veneto Region (northeastern Italy), and involved a sample of 916 students. The usage of energy drinks increased significantly with age, from 17.8 % among sixth graders to 56.2 % among eighth graders. Among the male student population, 16.5 % of those in the eighth grade and 6.21 % of those in the sixth grade, respectively, drank them at least once a week. The independent variables conferring a higher likelihood of being at least once-a-week energy drink consumers were smoking and alcohol consumption. Awareness of the damage caused by energy drinks emerged as a protective factor that reduced the likelihood of young students consuming such drinks. This study showed that energy drink consumption is rising steadily in children and early adolescents. Energy drink consumption was found associated with the abuse of other substances, such as tobacco and alcohol.

Evaluation of the effects of one cold wave on heating energy consumption in different regions of northern China

NASA Astrophysics Data System (ADS)

Jiang, D.; Xiao, W.; Wang, J.; Wang, H.; Zhao, Y.; Wang, Y.

2017-12-01

The heating energy consumption per floor area (HECPA) and heating degree days (HDD) are effective indicators in quantifying the energy demand for heating with climate change. Using the heating energy consumption and meteorological data, an attempt has been made to analyse the relationship between the HECPA and HDD in different regions of northern China by the linear regression model. Based on the constructed model, the effects of one cold wave on heating energy consumption in different regions are evaluated. The results show that the HECPA and HDD in Beijing have a positive correlation with a correlation coefficient of 0.68. During the cold wave in 2016, the heating energy consumption in Beijing approximately increases 2.37 per cent compared with 2014. However, no correlation has been found between the HECPA and HDD in the relatively undeveloped regions. It seems that the cold wave has a greater effect on the developed regions than relatively undeveloped ones. It is considered that the reasons for the little effect of one cold wave on heating energy consumption in the undeveloped regions are outdated heating systems, insufficient energy supply for heating and low living standards.

An Energy-Efficient Approach to Enhance Virtual Sensors Provisioning in Sensor Clouds Environments

PubMed Central

Filho, Raimir Holanda; Rabêlo, Ricardo de Andrade L.; de Carvalho, Carlos Giovanni N.; Mendes, Douglas Lopes de S.; Costa, Valney da Gama

2018-01-01

Virtual sensors provisioning is a central issue for sensors cloud middleware since it is responsible for selecting physical nodes, usually from Wireless Sensor Networks (WSN) of different owners, to handle user’s queries or applications. Recent works perform provisioning by clustering sensor nodes based on the correlation measurements and then selecting as few nodes as possible to preserve WSN energy. However, such works consider only homogeneous nodes (same set of sensors). Therefore, those works are not entirely appropriate for sensor clouds, which in most cases comprises heterogeneous sensor nodes. In this paper, we propose ACxSIMv2, an approach to enhance the provisioning task by considering heterogeneous environments. Two main algorithms form ACxSIMv2. The first one, ACASIMv1, creates multi-dimensional clusters of sensor nodes, taking into account the measurements correlations instead of the physical distance between nodes like most works on literature. Then, the second algorithm, ACOSIMv2, based on an Ant Colony Optimization system, selects an optimal set of sensors nodes from to respond user’s queries while attending all parameters and preserving the overall energy consumption. Results from initial experiments show that the approach reduces significantly the sensor cloud energy consumption compared to traditional works, providing a solution to be considered in sensor cloud scenarios. PMID:29495406

An Energy-Efficient Approach to Enhance Virtual Sensors Provisioning in Sensor Clouds Environments.

PubMed

Lemos, Marcus Vinícius de S; Filho, Raimir Holanda; Rabêlo, Ricardo de Andrade L; de Carvalho, Carlos Giovanni N; Mendes, Douglas Lopes de S; Costa, Valney da Gama

2018-02-26

Virtual sensors provisioning is a central issue for sensors cloud middleware since it is responsible for selecting physical nodes, usually from Wireless Sensor Networks (WSN) of different owners, to handle user's queries or applications. Recent works perform provisioning by clustering sensor nodes based on the correlation measurements and then selecting as few nodes as possible to preserve WSN energy. However, such works consider only homogeneous nodes (same set of sensors). Therefore, those works are not entirely appropriate for sensor clouds, which in most cases comprises heterogeneous sensor nodes. In this paper, we propose ACxSIMv2, an approach to enhance the provisioning task by considering heterogeneous environments. Two main algorithms form ACxSIMv2. The first one, ACASIMv1, creates multi-dimensional clusters of sensor nodes, taking into account the measurements correlations instead of the physical distance between nodes like most works on literature. Then, the second algorithm, ACOSIMv2, based on an Ant Colony Optimization system, selects an optimal set of sensors nodes from to respond user's queries while attending all parameters and preserving the overall energy consumption. Results from initial experiments show that the approach reduces significantly the sensor cloud energy consumption compared to traditional works, providing a solution to be considered in sensor cloud scenarios.

Energy efficiency evaluation of hospital building office

NASA Astrophysics Data System (ADS)

Fitriani, Indah; Sangadji, Senot; Kristiawan, S. A.

2017-01-01

One of the strategy employed in building design is reducing energy consumption while maintaining the best comfort zone in building indoor climate. The first step to improve office buildings energy performance by evaluating its existing energy usage using energy consumption intensity (Intensitas Konsumsi Energi, IKE) index. Energy evaluation of office building for hospital dr. Sayidiman at Kabupaten Magetan has been carried out in the initial investigation. The office building is operated with active cooling (air conditioning, AC) and use limited daylighting which consumes 14.61 kWh/m2/month. This IKE value is attributed into a slightly inefficient category. Further investigation was carried out by modeling and simulating thermal energy load and room lighting in every building zone using of Ecotect from Autodesk. Three scenarios of building energy and lighting retrofit have been performed simulating representing energy efficiency using cross ventilation, room openings, and passive cooling. The results of the numerical simulation indicate that the third scenario by employing additional windows, reflector media and skylight exhibit the best result and in accordance with SNI 03-6575-2001 lighting standard. Total thermal load of the existing building which includes fabric gains, indirect solar gains, direct solar gains, ventilation fans, internal gains, inter-zonal gains and cooling load were 162,145.40 kWh. Based on the three scenarios, the thermal load value (kWh) obtained was lowest achieved scenario 2 with the thermal value of 117,539.08 kWh.The final results are interpreted from the total energy emissions evaluated using the Ecotect software, the heating and cooling demand value and specific design of the windows are important factors to determine the energy efficiency of the buildings.

Power Play: Calculating Home Electricity Consumption

ERIC Educational Resources Information Center

Roman, Harry T.

2007-01-01

With both energy usage and energy costs rising rapidly, people can benefit from paying closer attention to their consumption of energy. Students can gain greater awareness of their personal use of electricity and get some excellent experience with the practical application of mathematics by studying their families' consumption of electricity. A…

RECS Data Show Decreased Energy Consumption per Household

EIA Publications

2012-01-01

Total United States energy consumption in homes has remained relatively stable for many years as increased energy efficiency has offset the increase in the number and average size of housing units, according to the newly released data from the Residential Energy Consumption Survey (RECS). The average household consumed 90 million British thermal units (Btu) in 2009 based on RECS. This continues the downward trend in average residential energy consumption of the last 30 years. Despite increases in the number and the average size of homes plus increased use of electronics, improvements in efficiency for space heating, air conditioning, and major appliances have all led to decreased consumption per household. Newer homes also tend to feature better insulation and other characteristics, such as double-pane windows, that improve the building envelope.

Evaluation of energy consumption during aerobic sewage sludge treatment in dairy wastewater treatment plant.

PubMed

Dąbrowski, Wojciech; Żyłka, Radosław; Malinowski, Paweł

2017-02-01

The subject of the research conducted in an operating dairy wastewater treatment plant (WWTP) was to examine electric energy consumption during sewage sludge treatment. The excess sewage sludge was aerobically stabilized and dewatered with a screw press. Organic matter varied from 48% to 56% in sludge after stabilization and dewatering. It proves that sludge was properly stabilized and it was possible to apply it as a fertilizer. Measurement factors for electric energy consumption for mechanically dewatered sewage sludge were determined, which ranged between 0.94 and 1.5 kWhm -3 with the average value at 1.17 kWhm -3 . The shares of devices used for sludge dewatering and aerobic stabilization in the total energy consumption of the plant were also established, which were 3% and 25% respectively. A model of energy consumption during sewage sludge treatment was estimated according to experimental data. Two models were applied: linear regression for dewatering process and segmented linear regression for aerobic stabilization. The segmented linear regression model was also applied to total energy consumption during sewage sludge treatment in the examined dairy WWTP. The research constitutes an introduction for further studies on defining a mathematical model used to optimize electric energy consumption by dairy WWTPs. Copyright © 2016 Elsevier Inc. All rights reserved.

Comparison of phthalic acid removal from aqueous solution by electrochemical methods: Optimization, kinetic and sludge study.

PubMed

Sandhwar, Vishal Kumar; Prasad, Basheshwar

2017-12-01

In this work, comparative study between electrochemical processes such as electrocoagulation (EC), peroxi-coagulation (PC) and peroxi-electrocoagulation (PEC) was performed for the removal of phthalic acid (PA) and chemical oxygen demand (COD) from aqueous medium. Initially, acid treatment was studied at various pH (1-3) and temperature (10-55 °C). Subsequently, the supernatant was re-treated by electrochemical processes such as EC, PC and PEC separately. Independent parameters viz. pH, current density (CD), electrolyte concentration (m), electrode gap (g), H 2 O 2 concentration and electrolysis time (t) were optimized by Central Composite Design (CCD) for these electrochemical processes. All three processes were compared based on removal, energy consumption, kinetic analysis, operating cost and sludge characteristics. In this study, PEC process was found more efficient among EC, PC and PEC processes in order to get maximum removal, minimum energy consumption and minimum operating cost. Maximum removal of PA- 68.21%, 74.36%, 82.25% & COD- 64.79%, 68.15%, 75.21% with energy consumption - 120.95, 97.51, 65.68 (kWh/kg COD removed) were attained through EC, PC and PEC processes respectively at their corresponding optimum conditions. Results indicated that PA and COD removals are in order of PEC > PC > EC under optimum conditions. First order kinetic model was found able to describe the degradation kinetics and provided best correlation for the removal rate within the acceptable error range. Copyright © 2017 Elsevier Ltd. All rights reserved.

Vacuum arc plasma thrusters with inductive energy storage driver

NASA Technical Reports Server (NTRS)

Schein, Jochen (Inventor); Gerhan, Andrew N. (Inventor); Woo, Robyn L. (Inventor); Au, Michael Y. (Inventor); Krishnan, Mahadevan (Inventor)

2004-01-01

An apparatus for producing a vacuum arc plasma source device using a low mass, compact inductive energy storage circuit powered by a low voltage DC supply acts as a vacuum arc plasma thruster. An inductor is charged through a switch, subsequently the switch is opened and a voltage spike of Ldi/dt is produced initiating plasma across a resistive path separating anode and cathode. The plasma is subsequently maintained by energy stored in the inductor. Plasma is produced from cathode material, which allows for any electrically conductive material to be used. A planar structure, a tubular structure, and a coaxial structure allow for consumption of cathode material feed and thereby long lifetime of the thruster for long durations of time.

10 CFR 434.508 - Determination of the design energy consumption and design energy cost.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Determination of the design energy consumption and design energy cost. 434.508 Section 434.508 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance...

10 CFR 434.508 - Determination of the design energy consumption and design energy cost.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Determination of the design energy consumption and design energy cost. 434.508 Section 434.508 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance...

10 CFR 434.508 - Determination of the design energy consumption and design energy cost.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Determination of the design energy consumption and design energy cost. 434.508 Section 434.508 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance...

10 CFR 434.508 - Determination of the design energy consumption and design energy cost.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Determination of the design energy consumption and design energy cost. 434.508 Section 434.508 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance...

10 CFR 434.508 - Determination of the design energy consumption and design energy cost.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Determination of the design energy consumption and design energy cost. 434.508 Section 434.508 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CODE FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS Building Energy Cost Compliance...

Low energy consumption vortex wave flow membrane bioreactor.

PubMed

Wang, Zhiqiang; Dong, Weilong; Hu, Xiaohong; Sun, Tianyu; Wang, Tao; Sun, Youshan

2017-11-01

In order to reduce the energy consumption and membrane fouling of the conventional membrane bioreactor (MBR), a kind of low energy consumption vortex wave flow MBR was exploited based on the combination of biofilm process and membrane filtration process, as well as the vortex wave flow technique. The experimental results showed that the vortex wave flow state in the membrane module could be formed when the Reynolds number (Re) of liquid was adjusted between 450 and 1,050, and the membrane flux declined more slowly in the vortex wave flow state than those in the laminar flow state and turbulent flow state. The MBR system was used to treat domestic wastewater under the condition of vortex wave flow state for 30 days. The results showed that the removal efficiency for CODcr and NH 3 -N was 82% and 98% respectively, and the permeate quality met the requirement of 'Water quality standard for urban miscellaneous water consumption (GB/T 18920-2002)'. Analysis of the energy consumption of the MBR showed that the average energy consumption was 1.90 ± 0.55 kWh/m 3 (permeate), which was only two thirds of conventional MBR energy consumption.

Energy drink consumption and associated health behaviors among university students in an urban setting.

PubMed

Spierer, David K; Blanding, Nineequa; Santella, Anthony

2014-02-01

The objective of this study is to describe energy drink consumption and health behaviors among college students attending a predominantly minority university. Undergraduate and graduate students attending a private, minority-serving university were invited to participate in an online survey between September 2009 and August 2010. Out of 2,500 students, 407 participated yielding a response of 16 %. Analysis assessed energy drink consumption as well as participation in sport activities and high-risk behaviors. Energy drink consumption is significantly related with drinking alcohol to inebriation and driving (r = .14, p < .05) and to riding with a drunk driver (r = .15, p < .05). Athletes were more likely to engage in drinking alcohol to inebriation and driving F (1, 186) = 6.12, p < .02. Energy drink consumption is a common practice among racial minority university students. Tailored health promotion strategies and interventions are needed to address misconceptions of energy drink and alcohol mixing.

A new procedure to analyze the effect of air changes in building energy consumption

PubMed Central

2014-01-01

Background Today, the International Energy Agency is working under good practice guides that integrate appropriate and cost effective technologies. In this paper a new procedure to define building energy consumption in accordance with the ISO 13790 standard was performed and tested based on real data from a Spanish region. Results Results showed that the effect of air changes on building energy consumption can be defined using the Weibull peak function model. Furthermore, the effect of climate change on building energy consumption under several different air changes was nearly nil during the summer season. Conclusions The procedure obtained could be the much sought-after solution to the problem stated by researchers in the past and future research works relating to this new methodology could help us define the optimal improvement in real buildings to reduce energy consumption, and its related carbon dioxide emissions, at minimal economical cost. PMID:24456655

Efficiency Assessment of the Power Supply System of an Industrial Enterprise Through the Assessment of the Modes of Electric Power Consumption

NASA Astrophysics Data System (ADS)

Miatishkin, Gennadii V.; Filinova, Anastasiia S.

2018-01-01

The paper reviews the terms of the rational consumption and distribution of the energy resources at an enterprise. The authors analyze the significance and the effect of the change of the profile of the energy consumption per hour by the enterprise. The text explores the factors influencing the discipline of the planned electricity and power consumption. The authors present a calculation of the weighted average deviations for consumers and the terms of their assessment. The authors make conclusions concerning the rationality of the means of defining the energy efficiency system through the assessment of the modes of electric energy consumption of an industrial enterprise.

A forecasting model for power consumption of high energy-consuming industries based on system dynamics

NASA Astrophysics Data System (ADS)

Zhou, Zongchuan; Dang, Dongsheng; Qi, Caijuan; Tian, Hongliang

2018-02-01

It is of great significance to make accurate forecasting for the power consumption of high energy-consuming industries. A forecasting model for power consumption of high energy-consuming industries based on system dynamics is proposed in this paper. First, several factors that have influence on the development of high energy-consuming industries in recent years are carefully dissected. Next, by analysing the relationship between each factor and power consumption, the system dynamics flow diagram and equations are set up to reflect the relevant relationships among variables. In the end, the validity of the model is verified by forecasting the power consumption of electrolytic aluminium industry in Ningxia according to the proposed model.

Energy consumption analysis of the Venus Deep Space Station (DSS-13)

NASA Technical Reports Server (NTRS)

Hayes, N. V.

1983-01-01

This report continues the energy consumption analysis and verification study of the tracking stations of the Goldstone Deep Space Communications Complex, and presents an audit of the Venus Deep Space Station (DSS 13). Due to the non-continuous radioastronomy research and development operations at the station, estimations of energy usage were employed in the energy consumption simulation of both the 9-meter and 26-meter antenna buildings. A 17.9% decrease in station energy consumption was experienced over the 1979-1981 years under study. A comparison of the ECP computer simulations and the station's main watt-hour meter readings showed good agreement.

Energy Resources Program of the U.S. Geological Survey

USGS Publications Warehouse

Weedman, Suzanne

2001-01-01

Our Nation faces the simultaneous challenges of increasing demand for energy, declining domestic production from existing oil and gas fields, and increasing expectations for environmental protection. The Energy Information Administration (2000) forecasts that worldwide energy consumption will increase 32 percent between 1999 and 2020 because of growth of the world economy. Forecasts indicate that in the same time period, U.S. natural gas consumption will increase 62 percent, petroleum consumption will increase 33 percent, and coal consumption will increase 22 percent. The U.S. Geological Survey provides the objective scientific information our society needs for sound decisions regarding land management, environmental quality, and economic, energy, and strategic policy.

Estimation of Power Consumption in the Circular Sawing of Stone Based on Tangential Force Distribution

NASA Astrophysics Data System (ADS)

Huang, Guoqin; Zhang, Meiqin; Huang, Hui; Guo, Hua; Xu, Xipeng

2018-04-01

Circular sawing is an important method for the processing of natural stone. The ability to predict sawing power is important in the optimisation, monitoring and control of the sawing process. In this paper, a predictive model (PFD) of sawing power, which is based on the tangential force distribution at the sawing contact zone, was proposed, experimentally validated and modified. With regard to the influence of sawing speed on tangential force distribution, the modified PFD (MPFD) performed with high predictive accuracy across a wide range of sawing parameters, including sawing speed. The mean maximum absolute error rate was within 6.78%, and the maximum absolute error rate was within 11.7%. The practicability of predicting sawing power by the MPFD with few initial experimental samples was proved in case studies. On the premise of high sample measurement accuracy, only two samples are required for a fixed sawing speed. The feasibility of applying the MPFD to optimise sawing parameters while lowering the energy consumption of the sawing system was validated. The case study shows that energy use was reduced 28% by optimising the sawing parameters. The MPFD model can be used to predict sawing power, optimise sawing parameters and control energy.

Estimation of energetic efficiency of heat supply in front of the aircraft at supersonic accelerated flight. Part 1. Mathematical models

NASA Astrophysics Data System (ADS)

Latypov, A. F.

2008-12-01

Fuel economy at boost trajectory of the aerospace plane was estimated during energy supply to the free stream. Initial and final flight velocities were specified. The model of a gliding flight above cold air in an infinite isobaric thermal wake was used. The fuel consumption rates were compared at optimal trajectory. The calculations were carried out using a combined power plant consisting of ramjet and liquid-propellant engine. An exergy model was built in the first part of the paper to estimate the ramjet thrust and specific impulse. A quadratic dependence on aerodynamic lift was used to estimate the aerodynamic drag of aircraft. The energy for flow heating was obtained at the expense of an equivalent reduction of the exergy of combustion products. The dependencies were obtained for increasing the range coefficient of cruise flight for different Mach numbers. The second part of the paper presents a mathematical model for the boost interval of the aircraft flight trajectory and the computational results for the reduction of fuel consumption at the boost trajectory for a given value of the energy supplied in front of the aircraft.

Mexico City air quality research initiative. Volume 2, Problem definition, background, and summary of prior research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-06-01

Air pollution in Mexico City has increased along with the growth of the city, the movement of its population, and the growth of employment created by industry. The main cause of pollution in the city is energy consumption. Therefore, it is necessary to take into account the city`s economic development and its prospects when considering the technological relationships between well-being and energy consumption. Air pollution in the city from dust and other particles suspended in the air is an old problem. However, pollution as we know it today began about 50 years ago with the growth of industry, transportation, andmore » population. The level of well-being attained in Mexico City implies a high energy use that necessarily affects the valley`s natural air quality. However, the pollution has grown so fast that the City must act urgently on three fronts: first, following a comprehensive strategy, transform the economic foundation of the city with nonpolluting activities to replace the old industries, second, halt pollution growth through the development of better technologies; and third, use better fuels, emission controls, and protection of wooded areas.« less

Review of China's Low-Carbon City Initiative and Developments in the Coal Industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fridley, David; Khanna, Nina Zheng; Hong, Lixuan

As China continues its double-digit economic growth, coal remains the principal fuel for the country’s primary energy consumption and electricity generation. China’s dependence on coal in coming years makes its carbon emission intensity reduction targets more difficult to achieve, particularly given rising electricity demand from a growing number of Chinese cities. This paradox has led the government to pursue cleaner and more efficient development of the coal industry on the supply side and “low carbon” development of cities on the demand side. To understand and assess how China may be able to meet its energy and carbon intensity reduction targets,more » this report looks at the recent development of low carbon cities as well as new developments and trends in the coal industry. Specifically, we review low-carbon city and related eco-city development in China before delving into a comparison of eight pilot lowcarbon city plans to highlight their strengths and weaknesses in helping achieve national energy and carbon targets. We then provide insights into the future outlook for China’s coal industry by evaluating new and emerging trends in coal production, consumption, transport, trade and economic performance.« less

Analyzing Residential End-Use Energy Consumption Data to Inform Residential Consumer Decisions and Enable Energy Efficiency Improvements

NASA Astrophysics Data System (ADS)

Carlson, Derrick R.

While renewable energy is in the process of maturing, energy efficiency improvements may provide an opportunity to reduce energy consumption and consequent greenhouse gas emissions to bridge the gap between current emissions and the reductions necessary to prevent serious effects of climate change and will continue to be an integral part of greenhouse gas emissions policy moving forward. Residential energy is a largely untapped source of energy reductions as consumers, who wish to reduce energy consumption for monetary, environmental, and other reasons, face barriers. One such barrier is a lack of knowledge or understanding of how energy is consumed in a home and how to reduce this consumption effectively through behavioral and technological changes. One way to improve understanding of residential energy consumption is through the creation of a model to predict which appliances and electronics will be present and significantly contribute to the electricity consumption of a home on the basis of various characteristics of that home. The basis of this model is publically available survey data from the Residential Energy Consumption Survey (RECS). By predicting how households are likely to consume energy, homeowners, policy makers, and other stakeholders have access to valuable data that enables reductions in energy consumption in the residential sector. This model can be used to select homes that may be ripe for energy reductions and to predict the appliances that are the basis of these potential reductions. This work suggests that most homes in the U.S. have about eight appliances that are responsible for about 80% of the electricity consumption in that home. Characteristics such as census region, floor space, income, and total electricity consumption affect which appliances are likely to be in a home, however the number of appliances is generally around 8. Generally it takes around 4 appliances to reach the 50% threshold and 12 appliances to reach 90% of electricity consumption, which suggests significant diminishing returns for parties interested in monitoring appliance level electricity consumption. Another way to improve understanding of residential energy consumption is through the development of residential use phase energy vectors for use in the Economic Input-Output Life Cycle Assessment (EIO-LCA) model. The EIO-LCA model is a valuable scoping tool to predict the environmental impacts of economic activity. This tool has a gap in its capabilities as residential use phase energy is outside the scope of the model. Adding use phase energy vectors to the EIO-LCA model will improve the modeling, provide a more complete estimation of energy impacts and allow for embedded energy to be compared to use phase energy for the purchase of goods and services in the residential sector. This work adds 21 quads of energy to the residential energy sector for the model and 15 quads of energy for personal transportation. These additions represent one third of the total energy consumption of the United States and a third of the total energy in the EIO-LCA model. This work also demonstrates that for many products such as electronics and household appliances use phase energy demands are much greater than manufacturing energy demands and dominate the life cycles for these products. A final way in which this thesis improves upon the understanding of how use phase energy is consumed in a home is through the exploration of potential energy reductions in a home. This analysis selects products that are used or consumed in a home, and explores the potential for reductions in the embedded manufacturing and use phase energy of that product using EIO-LCA and the energy vectors created in Chapter 3. The results give consumers an understanding of where energy is consumed in the lifecycle of products that they purchase and provide policy makers with valuable information on how to focus or refocus policies that are aimed and reducing energy in the residential sector. This work finds that a majority of the energy consumed by retail products is consumed in the use phase of electronics and appliances. Consequently the largest potential reductions in residential energy use can be found in the same area. The work also shows that targeting reductions in the manufacturing energy for many products is likely to be an ineffective strategy for energy reductions with the exception of a select few products. Supply chain energy reductions may be more promising than manufacturing energy reductions, though neither is likely to be as effective as strategies that target use phase energy reductions.

Research & Development Roadmap for Next-Generation Appliances

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goetzler, William; Sutherland, Timothy; Foley, Kevin

2012-03-01

Appliances present an attractive opportunity for near-term energy savings in existing building, because they are less expensive and replaced more regularly than heating, ventilation, and air-conditioning (HVAC) systems or building envelope components. This roadmap targets high-priority research and development (R&D), demonstration and commercialization activities that could significantly reduce residential appliance energy consumption. The main objective of the roadmap is to seek activities that accelerate the commercialization of high-efficiency appliance technologies while maintaining the competitiveness of American industry. The roadmap identified and evaluated potential technical innovations, defined research needs, created preliminary research and development roadmaps, and obtained stakeholder feedback on themore » proposed initiatives.« less

Glass and Fiber Glass Footprint, October 2012 (MECS 2006)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2012-10-17

Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumedmore » by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released as a result of manufacturing energy use. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high- level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The principle energy use data source is the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), for consumption in the year 2006, when the survey was last completed.« less

Computers, Electronics, and Appliances Footprint, October 2012 (MECS 2006)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2012-10-17

Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumedmore » by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released as a result of manufacturing energy use. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high- level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The principle energy use data source is the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), for consumption in the year 2006, when the survey was last completed.« less

Textiles Footprint, October 2012 (MECS 2006)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2012-10-17

Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumedmore » by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released as a result of manufacturing energy use. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high- level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The principle energy use data source is the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), for consumption in the year 2006, when the survey was last completed.« less

Aluminum Footprint, October 2012 (MECS 2006)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2012-10-17

Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumedmore » by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released as a result of manufacturing energy use. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high- level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The principle energy use data source is the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), for consumption in the year 2006, when the survey was last completed.« less

Fabricated Metals Footprint, October 2012 (MECS 2006) (in Spanish)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2012-10-19

Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumedmore » by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released as a result of manufacturing energy use. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high- level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The principle energy use data source is the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), for consumption in the year 2006, when the survey was last completed.« less

Cement Footprint, October 2012 (MECS 2006)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2012-10-01

Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumedmore » by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released as a result of manufacturing energy use. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high- level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The principle energy use data source is the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), for consumption in the year 2006, when the survey was last completed.« less

Chemicals Footprint, October 2012 (MECS 2006)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2012-10-17

Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumedmore » by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released as a result of manufacturing energy use. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high- level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The principle energy use data source is the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), for consumption in the year 2006, when the survey was last completed.« less

Food and Beverage Footprint, October 2012 (MECS 2006)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2012-10-17

Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumedmore » by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released as a result of manufacturing energy use. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high- level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The principle energy use data source is the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), for consumption in the year 2006, when the survey was last completed.« less

All Manufacturing Footprint, October 2012 (MECS 2006)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2012-10-17

Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumedmore » by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released as a result of manufacturing energy use. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high- level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The principle energy use data source is the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), for consumption in the year 2006, when the survey was last completed.« less

Forest Products Footprint, October 2012 (MECS 2006)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2012-10-17

Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumedmore » by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released as a result of manufacturing energy use. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high- level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The principle energy use data source is the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), for consumption in the year 2006, when the survey was last completed.« less

Foundries Footprint, October 2012 (MECS 2006)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2012-10-17

Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumedmore » by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released as a result of manufacturing energy use. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high- level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The principle energy use data source is the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), for consumption in the year 2006, when the survey was last completed.« less

Plastics and Rubber Footprint, October 2012 (MECS 2006)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2012-10-17

Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumedmore » by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released as a result of manufacturing energy use. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high- level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The principle energy use data source is the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), for consumption in the year 2006, when the survey was last completed.« less

Transportation Equipment Footprint, October 2012 (MECS 2006)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2012-10-17

Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumedmore » by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released as a result of manufacturing energy use. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high- level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The principle energy use data source is the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), for consumption in the year 2006, when the survey was last completed.« less

Iron and Steel Footprint, October 2012 (MECS 2006)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2012-10-17

Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumedmore » by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released as a result of manufacturing energy use. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high- level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The principle energy use data source is the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), for consumption in the year 2006, when the survey was last completed.« less

Machinery Footprint, October 2012 (MECS 2006)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2012-10-17

Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumedmore » by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released as a result of manufacturing energy use. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high- level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The principle energy use data source is the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), for consumption in the year 2006, when the survey was last completed.« less

Petroleum Refining Footprint, October 2012 (MECS 2006)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2012-10-17

Manufacturing energy and carbon footprints map energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumedmore » by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released as a result of manufacturing energy use. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high- level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The principle energy use data source is the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), for consumption in the year 2006, when the survey was last completed.« less

Energy consumption renewable energy development and environmental impact in Algeria - Trend for 2030

NASA Astrophysics Data System (ADS)

Sahnoune, F.; Imessad, K.; Bouakaz, D. M.

2017-02-01

The study provides a detailed analysis of the energy production and consumption in Algeria and the associated CO2 emissions. Algeria is an important energy producer (oil and natural gas). The production is currently around 155 MToe. The total primary energy consumption amounted to about 58 MToe equivalent to 1.46 Toe/capita. The energy demand is still increasing, an average annual growth rate of more than 6% per year during the last decade. The growth rate for electricity production was almost twice that of the total energy consumption. In 2015, the installed capacity of the electricity generation plants reached 17.6 GW. Electricity consumption was 64.6 TWh and is expected to reach at least 75 TWh in 2020 and 130 TWh in 2030. The already high electricity demand will double by 2030. In the structure of final energy consumption, the transport sector ranks first (36%), natural gas consumption ranks second (28.5%), followed by electricity production (27.7%). By activity, the energy sector is the main source of CO2 emissions, about ¾ of the total and this sector has the most important potential for mitigation measures. CO2 emissions from this energy sector amounted to 112.2 MT CO2 as follows: 33% transport, 31% electricity production and 26% from natural gas combustion for residential use. The integration of renewable sources in the energy mix represents for Algeria a major challenge. In 2015, Algeria adopted an ambitious program for development of renewable energy. The target is to achieve 22 GW capacity of electricity from renewable by 2030 to reach a rate of 27 % of national electricity generation through renewable sources. By implementing this program, CO2 emissions of power generation will be reduced by more than 18% in 2030.

10 CFR 431.222 - Definitions concerning traffic signal modules and pedestrian modules.

Code of Federal Regulations, 2013 CFR

2013-01-01

... (or hydraulic) characteristics that affect energy consumption, energy efficiency, water consumption... 10 Energy 3 2013-01-01 2013-01-01 false Definitions concerning traffic signal modules and pedestrian modules. 431.222 Section 431.222 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY...

10 CFR 431.222 - Definitions concerning traffic signal modules and pedestrian modules.

Code of Federal Regulations, 2014 CFR

2014-01-01

... (or hydraulic) characteristics that affect energy consumption, energy efficiency, water consumption... 10 Energy 3 2014-01-01 2014-01-01 false Definitions concerning traffic signal modules and pedestrian modules. 431.222 Section 431.222 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY...

10 CFR 431.222 - Definitions concerning traffic signal modules and pedestrian modules.

Code of Federal Regulations, 2012 CFR

2012-01-01

... (or hydraulic) characteristics that affect energy consumption, energy efficiency, water consumption... 10 Energy 3 2012-01-01 2012-01-01 false Definitions concerning traffic signal modules and pedestrian modules. 431.222 Section 431.222 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY...

10 CFR Appendix D1 to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Clothes Dryers

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Uniform Test Method for Measuring the Energy Consumption... Appendix D1 to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Clothes... without heated or unheated forced air circulation to remove moisture from the clothing, remove wrinkles or...

10 CFR Appendix D2 to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Clothes Dryers

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Uniform Test Method for Measuring the Energy Consumption... Appendix D2 to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Clothes... forced air circulation to remove moisture from the clothing, remove wrinkles or prevent wrinkling of the...

10 CFR Appendix D1 to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Clothes Dryers

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Uniform Test Method for Measuring the Energy Consumption... Appendix D1 to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of Clothes... without heated or unheated forced air circulation to remove moisture from the clothing, remove wrinkles or...

Cash and in-kind transfers in poor rural communities in Mexico increase household fruit, vegetable, and micronutrient consumption but also lead to excess energy consumption.

PubMed

Leroy, Jef L; Gadsden, Paola; Rodríguez-Ramírez, Sonia; de Cossío, Teresa González

2010-03-01

Conditional transfer programs are increasingly popular, but the impact on household nutrient consumption has not been studied. We evaluated the impact of the Programa de Apoyo Alimentario (PAL), a cash and in-kind transfer program, on the energy and nutrient consumption of poor rural households in Mexico. The program has been shown to reduce poverty. Beneficiary households received either a food basket (including micronutrient-fortified milk) or cash. A random sample of 206 rural communities in Southern Mexico was randomly assigned to 1 of 4 groups: a monthly food basket with or without health and nutrition education, a cash transfer with a cost to the government equivalent to the food basket (14 USD/mo) with education, or control. The impact after 14 mo of exposure was estimated in a panel of 5823 households using a double difference regression model with household fixed effects. PAL was associated with increases (P < 0.01) in the consumption of total energy (5-9%), energy from fruits and vegetables (24-28%), and energy from animal source foods (24-39%). It also affected iron, zinc, and vitamin A and C consumption (P < 0.05). The consumption of energy and all nutrients was greater in the food basket group (P < 0.05). Cash and in-kind transfers in populations that are not energy-deficient should be carefully redesigned to ensure that pulling poor families out of poverty leads to improved micronutrient intake but not to increased energy consumption.

The influence of socioeconomic factors and family context on energy-dense food consumption among 2-year-old children.

PubMed

Vilela, S; Oliveira, A; Pinto, E; Moreira, P; Barros, H; Lopes, C

2015-01-01

Adverse effect on health has been described for a high consumption of energy-dense food, among children and adults. Limited research has been performed among pre-school children. The objective of this study is to evaluate the association between socioeconomic characteristics and family structure, and the consumption of energy-dense food among 2-year-old children. The study sample includes 808 2-year-old children from the Portuguese birth cohort Generation XXI with information on food consumption. Data were obtained from questionnaires administered by interviewers to parents. Based on a food frequency questionnaire, four groups of energy-dense food were defined: soft drinks (sweetened drinks), sweets (chocolate and candies), cakes (creamy and not creamy cakes and sweet pastry) and salty snacks (crisps, pizza and burger). Multinomial logistic regression models (odds ratio and 95% confidence intervals) were fitted to estimate the associations. Intakes of energy-dense food were much lower than in similar aged children in other Westernized countries. Maternal age and education, grandparents' education, household income and maternal occupation were inversely associated with the consumption of energy-dense food, particularly soft drinks and sweets. Children with older siblings were more likely to have a daily consumption of any energy-dense food. Few significant associations were found between socioeconomic characteristics and family structure and consumption of cakes and sweets less than once a week. High socioeconomic characteristics were associated with lower consumption of energy-dense food by 2-year-old children, mainly soft drinks and sweets. This influence is not only from parents' background but also from the preceding generations.

Energy drink consumption and the perceived risk and disapproval of drugs: Monitoring the Future, 2010-2016.

PubMed

Jackson, Dylan B; Leal, Wanda E

2018-07-01

Energy drinks have become quite popular in recent years among adolescents, prompting a wealth of recent research examining the potential deleterious consequences of energy drink consumption among youth. The present study adds to this body of work by exploring perceptions of risk and disapproval of soft and hard drugs among adolescents and whether such attitudes are predicted by patterns of energy drink/shot consumption. Data were derived from the seven most recent cohorts (2010-2016) of the Monitoring the Future (MTF) study, a nationally representative survey of U.S. youth. The significance of associations between energy drink/shot consumption and drug perceptions/attitudes was tested using logistic regression techniques employing adjustments for covariates and cohort-specific fixed effects. Energy drink/shot consumption was largely associated with significant increases in the odds of failing to perceive any risk of drug use and failing to disapprove of drug use among youths, regardless of whether attitudes concerning soft or hard drugs were examined. These associations were particularly robust in the case of habitual energy drink/shot consumers (relative to occasional consumers or abstainers). Additional efforts should be made to heighten awareness and education concerning the potential dangers of energy drink consumption among youth, particularly as it pertains to drug attitudes and diminished perceptions of substance use risk. Policies that minimize energy drink consumption among youth as well as programs that educate parents and teachers about the drug attitudes of youths who regularly consume energy drinks and promote active monitoring of these adolescents may be worthwhile. Copyright © 2018 Elsevier B.V. All rights reserved.

The consumption of alcohol mixed with energy drinks: prevalence and key correlates among Canadian high school students.

PubMed

Azagba, Sunday; Langille, Don; Asbridge, Mark

2013-01-01

An emerging body of research has reported high consumption of alcohol mixed with energy drinks among young adults, particularly college students. However, little is known about adolescents' consumption of these drinks. The purpose of this study was to determine the prevalence of consumption of alcohol mixed with energy drinks and to examine its correlates among Canadian high school students. We used a nationally representative sample of 36 155 Canadian students in grades 7 to 12 who participated in the 2010/2011 Youth Smoking Survey. About 20% of Canadian high school students reported consuming alcohol mixed with energy drinks in the last year, with considerable variation across provinces. Multivariate logistic regression analyses showed that the odds of consumption of these drinks were higher among students in lower grades (grades 7 and 8) and among students who identified their ethnicity as black or "other." Consumption of alcohol mixed with energy drinks was positively associated with substance use (current smoking [adjusted odds ratio (OR) 1.52, 95% confidence interval (CI) 1.19-1.95], past-year heavy drinking [adjusted OR 3.41, 95% CI 2.84-4.09] and marijuana use [adjusted OR 2.29, 95% CI 1.90-2.76]), absence from school, participation in school team sports and having more weekly spending money. Students who felt more connected to school and had an academic average of 70% or higher were less likely to consume alcohol mixed with energy drinks. The consumption of alcohol mixed with energy drinks is an emerging public health concern. Consumption of these drinks is substantial among Canadian high school students and can lead to many potential harms, both acute (e.g., injury) and long term (e.g., increased alcohol dependence). Our findings highlight the need for further research into the long-term effects of consumption of alcohol mixed with energy drinks among young people, as well as the development of interventions aimed at reducing consumption of these drinks.

The effects of temporal perspective on college students' energy drink consumption.

PubMed

Kim, Jarim; Anagondahalli, Deepa

2017-09-01

Consideration of future consequences (CFC) describes the extent to which individuals consider potential future outcomes of their present behaviors. This personality trait has been found to predict repetitive health behaviors. Research is yet to explore the role of health beliefs, which may mediate the relationship between CFC and self-directed health behaviors. Thus, this study examined how CFC affects energy drink-related health beliefs and consumption behavior. A cross-sectional correlational online survey with 1,050 college students was conducted. Key measures include the CFC Scale, health belief measures, and current energy drink consumption pattern. CFC was associated with energy drink consumption as well as several health beliefs. CFC had indirect effects on energy drink consumption through health beliefs, including perceived severity of consuming energy drinks (indirect effect estimate = -.191, 95% confidence interval [CI] [-.271, -.122]), perceived benefits of avoiding energy drinks (indirect effect estimate = -.108, 95% CI [-.174, -.050]), and perceived barriers in abstaining from energy drinks (energy level-related barriers, indirect effect estimate = -.274, 95% CI [-.387, -.181]; and socialization-related barriers, indirect effect estimate = .152, 95% CI [.078, .249]). As the first study to examine CFC's indirect effects on a self-directed health behavior through health beliefs, this study extended CFC's applicability by examining its role in the context of college students' energy drink consumption. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

76 FR 971 - Energy Conservation Program for Consumer Products: Test Procedures for Clothes Dryers and Room...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-06

... clarify application of these provisions for measuring standby mode and off mode power consumption in.... Measures of Energy Consumption a. Clothes Dryers b. Room Air Conditioners C. Clothes Dryer and Room Air... the Per-Cycle Gas Dryer Continuously Burning Pilot Light Gas Energy Consumption 9. Clarification of...

10 CFR 431.193 - Test procedures for measuring energy consumption of distribution transformers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... distribution transformers. 431.193 Section 431.193 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Test Procedures § 431.193 Test procedures for measuring energy consumption of distribution transformers. The test...

10 CFR 431.193 - Test procedures for measuring energy consumption of distribution transformers.

Code of Federal Regulations, 2012 CFR

2012-01-01

... distribution transformers. 431.193 Section 431.193 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Test Procedures § 431.193 Test procedures for measuring energy consumption of distribution transformers. The test...

10 CFR 431.193 - Test procedures for measuring energy consumption of distribution transformers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... distribution transformers. 431.193 Section 431.193 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Test Procedures § 431.193 Test procedures for measuring energy consumption of distribution transformers. The test...

10 CFR 431.193 - Test procedures for measuring energy consumption of distribution transformers.

Code of Federal Regulations, 2010 CFR

2010-01-01

... distribution transformers. 431.193 Section 431.193 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Test Procedures § 431.193 Test procedures for measuring energy consumption of distribution transformers. The test...

10 CFR 431.193 - Test procedures for measuring energy consumption of distribution transformers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... distribution transformers. 431.193 Section 431.193 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Distribution Transformers Test Procedures § 431.193 Test procedures for measuring energy consumption of distribution transformers. The test...

DNA Assembly with De Bruijn Graphs Using an FPGA Platform.

PubMed

Poirier, Carl; Gosselin, Benoit; Fortier, Paul

2018-01-01

This paper presents an FPGA implementation of a DNA assembly algorithm, called Ray, initially developed to run on parallel CPUs. The OpenCL language is used and the focus is placed on modifying and optimizing the original algorithm to better suit the new parallelization tool and the radically different hardware architecture. The results show that the execution time is roughly one fourth that of the CPU and factoring energy consumption yields a tenfold savings.

Do foreign direct investment and renewable energy consumption affect the CO2 emissions? New evidence from a panel ARDL approach to Kyoto Annex countries.

PubMed

Mert, Mehmet; Bölük, Gülden

2016-11-01

This study examines the impact of foreign direct investment (FDI) and the potential of renewable energy consumption on carbon dioxide (CO 2 ) emissions in 21 Kyoto countries using an unbalanced panel data. For this purpose, Environmental Kuznets Curve (EKC) hypothesis was tested using panel cointegration analysis. Panel causality tests show that there are significant long-run causalities from the variables to carbon emissions, renewable energy consumption, fossil fuel energy consumption and inflow foreign direct investments. The results of our model support the pollution haloes hypothesis which states that FDI brings in clean technology and improves the environmental standards. However, an inverted U-shaped relationship (EKC) was not supported by the estimated model for the 21 Kyoto countries. This means that economic growth cannot ensure environmental protection itself or environmental goals cannot await economic growth. Another important finding is that renewable energy consumption decreases carbon emissions. Based on the empirical results, some important policy implications emerge. Kyoto countries should stimulate the FDI inflows and usage of renewable energy consumption to mitigate the air pollution and meet the emission targets. This paper provides new insights into environment and energy policies through FDI inclusion.

Life cycle water use of energy production and its environmental impacts in China.

PubMed

Zhang, Chao; Anadon, Laura Diaz

2013-12-17

The energy sector is a major user of fresh water resources in China. We investigate the life cycle water withdrawals, consumptive water use, and wastewater discharge of China's energy sectors and their water-consumption-related environmental impacts, using a mixed-unit multiregional input-output (MRIO) model and life cycle impact assessment method (LCIA) based on the Eco-indicator 99 framework. Energy production is responsible for 61.4 billion m(3) water withdrawals, 10.8 billion m(3) water consumption, and 5.0 billion m(3) wastewater discharges in China, which are equivalent to 12.3%, 4.1% and 8.3% of the national totals, respectively. The most important feature of the energy-water nexus in China is the significantly uneven spatial distribution of consumptive water use and its corresponding environmental impacts caused by the geological discrepancy among fossil fuel resources, fresh water resources, and energy demand. More than half of energy-related water withdrawals occur in the east and south coastal regions. However, the arid north and northwest regions have much larger water consumption than the water abundant south region, and bear almost all environmental damages caused by consumptive water use.

Energy consumption optimization of the total-FETI solver by changing the CPU frequency

NASA Astrophysics Data System (ADS)

Horak, David; Riha, Lubomir; Sojka, Radim; Kruzik, Jakub; Beseda, Martin; Cermak, Martin; Schuchart, Joseph

2017-07-01

The energy consumption of supercomputers is one of the critical problems for the upcoming Exascale supercomputing era. The awareness of power and energy consumption is required on both software and hardware side. This paper deals with the energy consumption evaluation of the Finite Element Tearing and Interconnect (FETI) based solvers of linear systems, which is an established method for solving real-world engineering problems. We have evaluated the effect of the CPU frequency on the energy consumption of the FETI solver using a linear elasticity 3D cube synthetic benchmark. In this problem, we have evaluated the effect of frequency tuning on the energy consumption of the essential processing kernels of the FETI method. The paper provides results for two types of frequency tuning: (1) static tuning and (2) dynamic tuning. For static tuning experiments, the frequency is set before execution and kept constant during the runtime. For dynamic tuning, the frequency is changed during the program execution to adapt the system to the actual needs of the application. The paper shows that static tuning brings up 12% energy savings when compared to default CPU settings (the highest clock rate). The dynamic tuning improves this further by up to 3%.

Safe Upper-Bounds Inference of Energy Consumption for Java Bytecode Applications

NASA Technical Reports Server (NTRS)

Navas, Jorge; Mendez-Lojo, Mario; Hermenegildo, Manuel V.

2008-01-01

Many space applications such as sensor networks, on-board satellite-based platforms, on-board vehicle monitoring systems, etc. handle large amounts of data and analysis of such data is often critical for the scientific mission. Transmitting such large amounts of data to the remote control station for analysis is usually too expensive for time-critical applications. Instead, modern space applications are increasingly relying on autonomous on-board data analysis. All these applications face many resource constraints. A key requirement is to minimize energy consumption. Several approaches have been developed for estimating the energy consumption of such applications (e.g. [3, 1]) based on measuring actual consumption at run-time for large sets of random inputs. However, this approach has the limitation that it is in general not possible to cover all possible inputs. Using formal techniques offers the potential for inferring safe energy consumption bounds, thus being specially interesting for space exploration and safety-critical systems. We have proposed and implemented a general frame- work for resource usage analysis of Java bytecode [2]. The user defines a set of resource(s) of interest to be tracked and some annotations that describe the cost of some elementary elements of the program for those resources. These values can be constants or, more generally, functions of the input data sizes. The analysis then statically derives an upper bound on the amount of those resources that the program as a whole will consume or provide, also as functions of the input data sizes. This article develops a novel application of the analysis of [2] to inferring safe upper bounds on the energy consumption of Java bytecode applications. We first use a resource model that describes the cost of each bytecode instruction in terms of the joules it consumes. With this resource model, we then generate energy consumption cost relations, which are then used to infer safe upper bounds. How energy consumption for each bytecode instruction is measured is beyond the scope of this paper. Instead, this paper is about how to infer safe energy consumption estimations assuming that those energy consumption costs are provided. For concreteness, we use a simplified version of an existing resource model [1] in which an energy consumption cost for individual Java opcodes is defined.

Consumption of Energy Drinks Among Lebanese Youth: A Pilot Study on the Prevalence and Side Effects

PubMed Central

Itany, Manal; Diab, Batoul; Rachidi, Samar; Awada, Sanaa; Al Hajje, Amal; Bawab, Wafaa; Salameh, Pascale

2014-01-01

Background: The new millennium has been together with a variety of synthetic and caffeinated high-energy drinks targeting the youth market. Energy drinks raise the level of energy and their consumption has been increased significantly worldwide. Objectives: This research aimed to determine patterns of energy drink consumption and to assess the prevalence of adverse side effects among energy drink users. Patients and Methods: A pilot cross-sectional study survey was undertaken on students aged between 13 and 30 years in private and public schools and universities in Lebanon over 5 months. A self-administered questionnaire was used inquiring about sociodemographic characteristics, consumption patterns, attitudes and beliefs about energy drinks. Bivariate and multivariate analyses were conducted. Data was analyzed using SPSS 17. Results: We studied 1500 students (mean age: 18.92 ± 1.85; 51.3% were males). The overall prevalence of energy drinks consumption was 63.6% (60.5% were males), among which 50.5% used alcoholic energy drinks. Respondents indicated that most consumed energy drinks were “Red Bull” and “Boom Boom” (70.9% and 51.5% respectively). In total, 64.5% of participants believed the effect of these drinks in energizing the body, and 72.7% believed that they can stimulate intellectual capacities. In addition, 29.6% of consumers experienced at least one adverse effect, where tachycardia was reported in 21.1% of cases. On the other hand, desired effects felt after consumption were mostly pleasure (33.8%). Males had a 3-time more risk of consuming such drinks compared to females (OR: 0.381, P < 0.001; 95% CI: 0.300-0.484). Additionally, this analysis demonstrated a significant association between energy drinks consumption and regions outside Beirut (OR: 1.401, P: 0.006; 95% CI: 1.103-1.781), medical field of work (OR: 0.376, P: 0.010; 95% CI: 0.179-0.790) and higher personal income (OR: 1.317, P < 0.001; 95% CI: 1.117-1.553). Conclusions: This study showed a high prevalence of energy drinks consumption among youth. The current results highlight the importance of education to prevent the consumption of energy drinks in excessive quantities and modifying some wrong perceptions regarding the benefits of energy drinks in youth. PMID:25632383

Consumption of energy drinks among lebanese youth: a pilot study on the prevalence and side effects.

PubMed

Itany, Manal; Diab, Batoul; Rachidi, Samar; Awada, Sanaa; Al Hajje, Amal; Bawab, Wafaa; Salameh, Pascale

2014-09-01

The new millennium has been together with a variety of synthetic and caffeinated high-energy drinks targeting the youth market. Energy drinks raise the level of energy and their consumption has been increased significantly worldwide. This research aimed to determine patterns of energy drink consumption and to assess the prevalence of adverse side effects among energy drink users. A pilot cross-sectional study survey was undertaken on students aged between 13 and 30 years in private and public schools and universities in Lebanon over 5 months. A self-administered questionnaire was used inquiring about sociodemographic characteristics, consumption patterns, attitudes and beliefs about energy drinks. Bivariate and multivariate analyses were conducted. Data was analyzed using SPSS 17. We studied 1500 students (mean age: 18.92 ± 1.85; 51.3% were males). The overall prevalence of energy drinks consumption was 63.6% (60.5% were males), among which 50.5% used alcoholic energy drinks. Respondents indicated that most consumed energy drinks were "Red Bull" and "Boom Boom" (70.9% and 51.5% respectively). In total, 64.5% of participants believed the effect of these drinks in energizing the body, and 72.7% believed that they can stimulate intellectual capacities. In addition, 29.6% of consumers experienced at least one adverse effect, where tachycardia was reported in 21.1% of cases. On the other hand, desired effects felt after consumption were mostly pleasure (33.8%). Males had a 3-time more risk of consuming such drinks compared to females (OR: 0.381, P < 0.001; 95% CI: 0.300-0.484). Additionally, this analysis demonstrated a significant association between energy drinks consumption and regions outside Beirut (OR: 1.401, P: 0.006; 95% CI: 1.103-1.781), medical field of work (OR: 0.376, P: 0.010; 95% CI: 0.179-0.790) and higher personal income (OR: 1.317, P < 0.001; 95% CI: 1.117-1.553). This study showed a high prevalence of energy drinks consumption among youth. The current results highlight the importance of education to prevent the consumption of energy drinks in excessive quantities and modifying some wrong perceptions regarding the benefits of energy drinks in youth.

Renewable energy, carbon emissions, and economic growth in 24 Asian countries: evidence from panel cointegration analysis.

PubMed

Lu, Wen-Cheng

2017-11-01

This article aims to investigate the relationship among renewable energy consumption, carbon dioxide (CO 2 ) emissions, and GDP using panel data for 24 Asian countries between 1990 and 2012. Panel cross-sectional dependence tests and unit root test, which considers cross-sectional dependence across countries, are used to ensure that the empirical results are correct. Using the panel cointegration model, the vector error correction model, and the Granger causality test, this paper finds that a long-run equilibrium exists among renewable energy consumption, carbon emission, and GDP. CO 2 emissions have a positive effect on renewable energy consumption in the Philippines, Pakistan, China, Iraq, Yemen, and Saudi Arabia. A 1% increase in GDP will increase renewable energy by 0.64%. Renewable energy is significantly determined by GDP in India, Sri Lanka, the Philippines, Thailand, Turkey, Malaysia, Jordan, United Arab Emirates, Saudi Arabia, and Mongolia. A unidirectional causality runs from GDP to CO 2 emissions, and two bidirectional causal relationships were found between CO 2 emissions and renewable energy consumption and between renewable energy consumption and GDP. The findings can assist governments in curbing pollution from air pollutants, execute energy conservation policy, and reduce unnecessary wastage of energy.

Mapping water consumption for energy production around the Pacific Rim

DOE PAGES

Tidwell, Vincent; Moreland, Barbie

2016-09-07

World energy demand is projected to increase by more than a third by 2035 and with it the use of water to extract and process fuels and generate electricity. Management of this energy-water nexus requires a clear understanding of the inter-related demands of these resources as well as their regional distribution. Toward this need the fresh water consumed for energy production was mapped for almost 12 000 watersheds distributed across the 21-economies comprising the Asia-Pacific Economic Cooperation. Fresh water consumption was estimated for ten different sectors including thermoelectric and hydroelectric power; energy extraction including coal, oil, natural gas, uranium andmore » unconventional oil/gas; energy processing including oil and biofuels; and biofuel feedstock irrigation. These measures of water consumption were put in context by drawing comparison with published measures of water risk. In total 791 watersheds (32%) of the 2511 watersheds where energy related water consumption occurred were also characterized by high to extreme water risk, these watersheds were designated as being at energy-water risk. Furthermore, for six economies watersheds at energy-water risk represented half or more of all basins where energy related water consumption occurred, while four additional economies exceeded 30%.« less

Mapping water consumption for energy production around the Pacific Rim

NASA Astrophysics Data System (ADS)

Tidwell, Vincent; Moreland, Barbie

2016-09-01

World energy demand is projected to increase by more than a third by 2035 and with it the use of water to extract and process fuels and generate electricity. Management of this energy-water nexus requires a clear understanding of the inter-related demands of these resources as well as their regional distribution. Toward this need the fresh water consumed for energy production was mapped for almost 12 000 watersheds distributed across the 21-economies comprising the Asia-Pacific Economic Cooperation. Fresh water consumption was estimated for ten different sectors including thermoelectric and hydroelectric power; energy extraction including coal, oil, natural gas, uranium and unconventional oil/gas; energy processing including oil and biofuels; and biofuel feedstock irrigation. These measures of water consumption were put in context by drawing comparison with published measures of water risk. In total 791 watersheds (32%) of the 2511 watersheds where energy related water consumption occurred were also characterized by high to extreme water risk, these watersheds were designated as being at energy-water risk. For six economies watersheds at energy-water risk represented half or more of all basins where energy related water consumption occurred, while four additional economies exceeded 30%.

Mapping water consumption for energy production around the Pacific Rim

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tidwell, Vincent; Moreland, Barbie

World energy demand is projected to increase by more than a third by 2035 and with it the use of water to extract and process fuels and generate electricity. Management of this energy-water nexus requires a clear understanding of the inter-related demands of these resources as well as their regional distribution. Toward this need the fresh water consumed for energy production was mapped for almost 12 000 watersheds distributed across the 21-economies comprising the Asia-Pacific Economic Cooperation. Fresh water consumption was estimated for ten different sectors including thermoelectric and hydroelectric power; energy extraction including coal, oil, natural gas, uranium andmore » unconventional oil/gas; energy processing including oil and biofuels; and biofuel feedstock irrigation. These measures of water consumption were put in context by drawing comparison with published measures of water risk. In total 791 watersheds (32%) of the 2511 watersheds where energy related water consumption occurred were also characterized by high to extreme water risk, these watersheds were designated as being at energy-water risk. Furthermore, for six economies watersheds at energy-water risk represented half or more of all basins where energy related water consumption occurred, while four additional economies exceeded 30%.« less

Smart campus: Data on energy consumption in an ICT-driven university.

PubMed

Popoola, Segun I; Atayero, Aderemi A; Okanlawon, Theresa T; Omopariola, Benson I; Takpor, Olusegun A

2018-02-01

In this data article, we present a comprehensive dataset on electrical energy consumption in a university that is practically driven by Information and Communication Technologies (ICTs). The total amount of electricity consumed at Covenant University, Ota, Nigeria was measured, monitored, and recorded on daily basis for a period of 12 consecutive months (January-December, 2016). Energy readings were observed from the digital energy meter (EDMI Mk10E) located at the distribution substation that supplies electricity to the university community. The complete energy data are clearly presented in tables and graphs for relevant utility and potential reuse. Also, descriptive first-order statistical analyses of the energy data are provided in this data article. For each month, the histogram distribution and time series plot of the monthly energy consumption data are analyzed to show insightful trends of energy consumption in the university. Furthermore, data on the significant differences in the means of daily energy consumption are made available as obtained from one-way Analysis of Variance (ANOVA) and multiple comparison post-hoc tests. The information provided in this data article will foster research development in the areas of energy efficiency, planning, policy formulation, and management towards the realization of smart campuses.

Identifying new technologies that save energy and reduce costs to the Federal sector: The New Technology Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunt, W.D.M.; Conover, D.R.; Stockmeyer, M.K.

1995-11-01

In 1990 the New Technology Demonstration Program (formerly the Test Bed Demonstration Program) was initiated by the US Department of Energy`s Office (DOE`s) of Federal Energy Management Programs with the purpose of accelerating the introduction of new technologies into the Federal sector. The program has since expanded into a multi-laboratory collaborative effort that evaluates new technologies and shares the results with the Federal design and procurement communities. These evaluations are performed on a collaborative basis which typically includes technology manufacturers, Federal facilities, utilities, trade associations, research institutes, and other in partnership with DOE. The end result is a range ofmore » effective technology transfer tools that provide operations and performance data on new technologies to Federal designers, building managers, and procurement officials. These tools assist in accelerating a technology`s Federal application and realizing reductions in energy consumption and costs.« less

Performance and economics of the ACES and alternative residential heating and air conditioning systems in 115 US cities

NASA Astrophysics Data System (ADS)

Abbatiello, L. A.; Nephew, E. A.; Ballou, M. L.

1981-03-01

The efficiency and life cycle costs of the brine chiller minimal annual cycle energy system (ACES) for residential space heating, air conditioning, and water heating requirements are compared with three conventional systems. The conventional systems evaluated are a high performance air-to-air heat pump with an electric resistance water heater, an electric furnace with a central air conditioner and an electric resistance water heater, and a high performance air-to-air heat pump with a superheater unit for hot water production. Monthly energy requirements for a reference single family house are calculated, and the initial cost and annual energy consumption of the systems, providing identical energy services, are computed and compared. The ACES consumes one third to one half ot the electrical energy required by the conventional systems and delivers the same annual loads at comparable costs.

Analysis of energy consumption and emission of the heterogeneous traffic flow consisting of traditional vehicles and electric vehicles

NASA Astrophysics Data System (ADS)

Xiao, Hong; Huang, Hai-Jun; Tang, Tie-Qiao

2017-12-01

Electric vehicle (EV) has become a potential traffic tool, which has attracted researchers to explore various traffic phenomena caused by EV (e.g. congestion, electricity consumption, etc.). In this paper, we study the energy consumption (including the fuel consumption and the electricity consumption) and emissions of heterogeneous traffic flow (that consists of the traditional vehicle (TV) and EV) under three traffic situations (i.e. uniform flow, shock and rarefaction waves, and a small perturbation) from the perspective of macro traffic flow. The numerical results show that the proportion of electric vehicular flow has great effects on the TV’s fuel consumption and emissions and the EV’s electricity consumption, i.e. the fuel consumption and emissions decrease while the electricity consumption increases with the increase of the proportion of electric vehicular flow. The results can help us better understand the energy consumption and emissions of the heterogeneous traffic flow consisting of TV and EV.

Energy Use in Manufacturing

EIA Publications

2006-01-01

This report addresses both manufacturing energy consumption and characteristics of the manufacturing economy related to energy consumption. In addition, special sections on fuel switching capacity and energy-management activities between 1998 and 2002 are also featured in this report.

Early-release Estimates From the 2010 MECS Show That Energy Consumption In the Manufacturing Sector Decreased Between 2006 and 2010

EIA Publications

2012-01-01

Energy consumption in the U.S. manufacturing sector fell from 21,098 trillion Btu (tBtu) in 2006 to 19,062 tBtu in 2010, a decline of almost 10% , based on preliminary estimates released from the 2010 Manufacturing Energy Consumption Survey (MECS). This decline continues the downward trend in manufacturing energy use since the 1998 MECS report.

10 CFR Appendix O to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Vented Home Heating Equipment

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Uniform Test Method for Measuring the Energy Consumption..., App. O Appendix O to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of... condition. 1.9“Flue gases” means reaction products resulting from the combustion of a fuel with the oxygen...

10 CFR Appendix O to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Vented Home Heating Equipment

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Uniform Test Method for Measuring the Energy Consumption..., App. O Appendix O to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of... products resulting from the combustion of a fuel with the oxygen of the air, including the inerts and any...

10 CFR Appendix O to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Vented Home Heating Equipment

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Uniform Test Method for Measuring the Energy Consumption..., App. O Appendix O to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of... condition. 1.9“Flue gases” means reaction products resulting from the combustion of a fuel with the oxygen...

10 CFR Appendix O to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Vented Home Heating Equipment

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Uniform Test Method for Measuring the Energy Consumption..., App. O Appendix O to Subpart B of Part 430—Uniform Test Method for Measuring the Energy Consumption of... condition. 1.9“Flue gases” means reaction products resulting from the combustion of a fuel with the oxygen...

Energy consumption analysis for the Mars deep space station

NASA Technical Reports Server (NTRS)

Hayes, N. V.

1982-01-01

Results for the energy consumption analysis at the Mars deep space station are presented. It is shown that the major energy consumers are the 64-Meter antenna building and the operations support building. Verification of the antenna's energy consumption is highly dependent on an accurate knowlege of the tracking operations. The importance of a regular maintenance schedule for the watt hour meters installed at the station is indicated.

Wireless network interface energy consumption implications of popular streaming formats

NASA Astrophysics Data System (ADS)

Chandra, Surendar

2001-12-01

With the proliferation of mobile streaming multimedia, available battery capacity constrains the end-user experience. Since streaming applications tend to be long running, wireless network interface card's (WNIC) energy consumption is particularly an acute problem. In this work, we explore the WNIC energy consumption implications of popular multimedia streaming formats from Microsoft (Windows media), Real (Real media) and Apple (Quick Time). We investigate the energy consumption under varying stream bandwidth and network loss rates. We also explore history-based client-side strategies to reduce the energy consumed by transitioning the WNICs to a lower power consuming sleep state. We show that Microsoft media tends to transmit packets at regular intervals; streams optimized for 28.8 Kbps can save over 80% in energy consumption with 2% data loss. A high bandwidth stream (768 Kbps) can still save 57% in energy consumption with less than 0.3% data loss. For high bandwidth streams, Microsoft media exploits network-level packet fragmentation, which can lead to excessive packet loss (and wasted energy) in a lossy network. Real stream packets tend to be sent closer to each other, especially at higher bandwidths. Quicktime packets sometimes arrive in quick succession; most likely an application level fragmentation mechanism. Such packets are harder to predict at the network level without understanding the packet semantics.

Can storage reduce electricity consumption? A general equation for the grid-wide efficiency impact of using cooling thermal energy storage for load shifting

NASA Astrophysics Data System (ADS)

Deetjen, Thomas A.; Reimers, Andrew S.; Webber, Michael E.

2018-02-01

This study estimates changes in grid-wide, energy consumption caused by load shifting via cooling thermal energy storage (CTES) in the building sector. It develops a general equation for relating generator fleet fuel consumption to building cooling demand as a function of ambient temperature, relative humidity, transmission and distribution current, and baseline power plant efficiency. The results present a graphical sensitivity analysis that can be used to estimate how shifting load from cooling demand to cooling storage could affect overall, grid-wide, energy consumption. In particular, because power plants, air conditioners and transmission systems all have higher efficiencies at cooler ambient temperatures, it is possible to identify operating conditions such that CTES increases system efficiency rather than decreasing it as is typical for conventional storage approaches. A case study of the Dallas-Fort Worth metro area in Texas, USA shows that using CTES to shift daytime cooling load to nighttime cooling storage can reduce annual, system-wide, primary fuel consumption by 17.6 MWh for each MWh of installed CTES capacity. The study concludes that, under the right circumstances, cooling thermal energy storage can reduce grid-wide energy consumption, challenging the perception of energy storage as a net energy consumer.

Relationship between mean daily energy intake and frequency of consumption of out-of-home meals in the UK National Diet and Nutrition Survey.

PubMed

Goffe, Louis; Rushton, Stephen; White, Martin; Adamson, Ashley; Adams, Jean

2017-09-22

Out-of-home meals have been characterised as delivering excessively large portions that can lead to high energy intake. Regular consumption is linked to weight gain and diet related diseases. Consumption of out-of-home meals is associated with socio-demographic and anthropometric factors, but the relationship between habitual consumption of such meals and mean daily energy intake has not been studied in both adults and children in the UK. We analysed adult and child data from waves 1-4 of the UK National Diet and Nutrition Survey using generalized linear modelling. We investigated whether individuals who report a higher habitual consumption of meals out in a restaurant or café, or takeaway meals at home had a higher mean daily energy intake, as estimated by a four-day food diary, whilst adjusting for key socio-demographic and anthropometric variables. Adults who ate meals out at least weekly had a higher mean daily energy intake consuming 75-104 kcal more per day than those who ate these meals rarely. The equivalent figures for takeaway meals at home were 63-87 kcal. There was no association between energy intake and frequency of consumption of meals out in children. Children who ate takeaway meals at home at least weekly consumed 55-168 kcal more per day than those who ate these meals rarely. Additionally, in children, there was an interaction with socio-economic position, where greater frequency of consumption of takeaway meals was associated with higher mean daily energy intake in those from less affluent households than those from more affluent households. Higher habitual consumption of out-of-home meals is associated with greater mean daily energy intake in the UK. More frequent takeaway meal consumption in adults and children is associated with greater daily energy intake and this effect is greater in children from less affluent households. Interventions seeking to reduce energy content through reformulation or reduction of portion sizes in restaurants, cafés and takeaways could potentially lead to reductions in mean daily energy intake, and may reduce inequalities in health in children.

Select Results from the Energy Assessor Experiment in the 2012 Commercial Buildings Energy Consumption Survey

EIA Publications

2015-01-01

As part of an effort to make EIA’s energy consumption surveys as accurate and efficient as possible, EIA invited the National Research Council (NRC) to review the Commercial Buildings Energy Consumption Survey (CBECS) data-gathering process and make recommendations for improvements. The NRC suggested sending professional energy assessors to some sites and comparing the data obtained from the survey to the data collected by the assessors. Results from the energy assessment data collection have largely confirmed the quality of data gathered by CBECS interviewers.

TERRASTAR: Terrestrial application of solar technology and research

NASA Technical Reports Server (NTRS)

1973-01-01

The application of solar energy to the energy crisis of the 70's and beyond is discussed in the context of energy consumption in the U.S., energy resources in the U.S., and the state-of-the-art of solar energy applications. Solar energy application concepts, such as solar farms (a term used to describe vast fields of concentrators collecting solar energy for the generation of steam to drive power turbines), an orbiting solar power station, and the conversion of solar energy into solar power for heating and cooling of individual buildings on the earth, are discussed. The report emphasizes the application of solar energy to the heating and cooling of buildings since this application seems to be more promising in the near term as far as research and development are concerned. The importance of initiating research and development on all solar application concepts is stressed as an important step in pursuing the use of solar energy. Immediate steps leading to the application of solar energy to heating and cooling of buildings are outlined to insure appreciable energy displacement through the use of solar energy by the year 2020.

Analysis of asymmetries in air pollution with water resources, and energy consumption in Iran.

PubMed

Ashouri, Mohammad Javad; Rafei, Meysam

2018-04-17

Iran should pay special attention to its excessive consumption of energy and air pollution due to the limited availability of water resources. This study explores the effects of the consumption of energy and water resources on air pollution in Iran from 1971 to 2014. It utilizes the non-linear autoregressive distributed lag approach to establish a robust relationship between the variables which show that both long- and short-run coefficients are asymmetrical. The positive and negative aspects of the long-run coefficients of energy consumption and water resources were found to be 0.19, - 1.63, 0.18, and 2.36, respectively, while only the negative ones were significant for energy consumption. Based on the cumulative effects, it can be established that there are important and significant differences in the responses of air pollution to positive and negative changes in water productivity and energy consumption. In particular, CO 2 gas emissions are affected by negative changes in H 2 O productivity both in terms of the total and the GDP per unit of energy use in Iran. In regard to short-run results, considerable asymmetric effects occur on all the variables for CO 2 emissions. Based on the results obtained, some recommendations are presented, which policymakers can adopt in efforts to address the issues of pollution and consumption.

Prey consumption and energy transfer by marine birds in the Gulf of Alaska

USGS Publications Warehouse

Hunt, G.L.; Drew, G.S.; Jahncke, J.; Piatt, John F.

2005-01-01

We investigated prey consumption by marine birds and their contribution to cross-shelf fluxes in the northern Gulf of Alaska. We utilized data from the North Pacific Pelagic Seabird Database for modeling energy demand and prey consumption. We found that prey consumption by marine birds was much greater over the continental shelf than it was over the basin. Over the shelf, subsurface-foraging marine birds dominated food consumption, whereas over the basin, surface-foraging birds took the most prey biomass. Daily consumption by marine birds during the non-breeding season ("winter") from September through April was greater than daily consumption during the breeding season, between May and August. Over the shelf, shearwaters, murres and, in winter, sea ducks, were the most important consumers. Over the basin, northern fulmars, gulls and kittiwakes predominated in winter and storm-petrels dominated in May to August. Our results suggest that marine birds contribute little to cross-shelf fluxes of energy or matter, but they do remove energy from the marine system through consumption, respiration and migration. ?? 2005 Elsevier Ltd. All rights reserved.

A study of energy consumption in turning process using lubrication of nanoparticles enhanced coconut oil (NECO)

NASA Astrophysics Data System (ADS)

Mansor, A. F.; Zakaria, M. S.; Azmi, A. I.; Khalil, A. N. M.; Musa, N. A.

2017-10-01

Cutting fluids play very important role in machining application in order to increase tool life, surface finish and reduce energy consumption. Instead of using petrochemical and synthetic based cutting fluids, vegetable oil based lubricants is safety for operators, environmental friendly and become more popular in the industrial applications. This research paper aims to find the advantage of using vegetable oils (coconut oil) with additional of nano particles (CuO) as lubricant to the energy consumption during machining process. The energy was measured for each run from 2 level factorial experimental layout. Obtained results illustrate that lubricant with enhancement of nanoparticles has capability to improve the energy consumption during the machining process.

Energy and traffic light labelling have no impact on parent and child fast food selection.

PubMed

Dodds, Pennie; Wolfenden, Luke; Chapman, Kathy; Wellard, Lyndal; Hughes, Clare; Wiggers, John

2013-10-25

Labelling of food from fast food restaurants at point-of-purchase has been suggested as one strategy to reduce population energy consumption and contribute to reductions in obesity prevalence. The aim of this study was to examine the effects of energy and single traffic light labelling systems on the energy content of child and adult intended food purchases. The study employed a randomised controlled trial design. English speaking parents of children aged between three and 12 years were recruited from an existing research cohort. Participants were mailed one of three hypothetical fast food menus. Menus differed in their labelling technique- either energy labels, single traffic light labels, or a no-label control. Participants then completed a telephone survey which assessed intended food purchases for both adult and child. The primary trial outcome was total energy of intended food purchase. A total of 329 participants completed the follow-up telephone interview. Eighty-two percent of the energy labelling group and 96% of the single traffic light labelling group reported noticing labelling information on their menu. There were no significant differences in total energy of intended purchases of parents, or intended purchases made by parents for children, between the menu labelling groups, or between menu labelling groups by socio-demographic subgroups. This study provided no evidence to suggest that energy labelling or single traffic light labelling alone were effective in reducing the energy of fast food items selected from hypothetical fast food menus for purchase. Additional complementary public health initiatives promoting the consumption of healthier foods identified by labelling, and which target other key drivers of menu item selection in this setting may be required. Copyright © 2013. Published by Elsevier Ltd.

The effect of energy and traffic light labelling on parent and child fast food selection: a randomised controlled trial.

PubMed

Dodds, Pennie; Wolfenden, Luke; Chapman, Kathy; Wellard, Lyndal; Hughes, Clare; Wiggers, John

2014-02-01

Labelling of food from fast food restaurants at point-of-purchase has been suggested as one strategy to reduce population energy consumption and contribute to reductions in obesity prevalence. The aim of this study was to examine the effects of energy and single traffic light labelling systems on the energy content of child and adult intended food purchases. The study employed a randomised controlled trial design. English speaking parents of children aged between three and 12 years were recruited from an existing research cohort. Participants were mailed one of three hypothetical fast food menus. Menus differed in their labelling technique – either energy labels, single traffic light labels, or a no-label control. Participants then completed a telephone survey which assessed intended food purchases for both adult and child. The primary trial outcome was total energy of intended food purchase. A total of 329 participants completed the follow-up telephone interview. Eighty-two percent of the energy labelling group and 96% of the single traffic light labelling group reported noticing labelling information on their menu. There were no significant differences in total energy of intended purchases of parents, or intended purchases made by parents for children, between the menu labelling groups, or between menu labelling groups by socio-demographic subgroups. This study provided no evidence to suggest that energy labelling or single traffic light labelling alone were effective in reducing the energy of fast food items selected from hypothetical fast food menus for purchase. Additional complementary public health initiatives promoting the consumption of healthier foods identified by labelling, and which target other key drivers of menu item selection in this setting may be required.

Clinical Symptoms and Adverse Effects Associated With Energy Drink Consumption in Adolescents.

PubMed

Bashir, Dalia; Reed-Schrader, Essie; Olympia, Robert P; Brady, Jodi; Rivera, Ruby; Serra, Theresa; Weber, Christopher

2016-11-01

The aims of the study were to determine the prevalence of energy drink consumption by adolescents, to identify associated clinical symptoms and adverse effects, and to gain an understanding to the motivation behind its consumption. A prospective, questionnaire-based study was conducted at 2 emergency departments from June 2011 to June 2013. The questionnaire was distributed to a convenience sample of adolescents aged 12 to 18 years. Stratification was performed on the basis of frequency of consumption: frequent consumption (at least once a month) and infrequent consumption (less frequent than once a month). Data analysis was performed on 612 completed questionnaires. Two hundred two responders (33%) were considered frequent energy drink consumers. Frequent consumers were more likely to be involved in high-risk behaviors and more likely to consume other caffeinated drinks. In the previous 6 months, frequent energy drink consumers were more likely to report headache (76%), anger (47%), and increased urination (24%) and were more likely to require medical evaluation for headache (41%) and difficulty breathing (22%). Frequent energy drink consumers were more likely to believe that energy drinks "help me do better in school" (12%), "help me do better in sports" (35%), "are just for fun" (46%), "help me stay up at night" (67%), and "make me concentrate/focus better" (34%). Clarifying common misconceptions associated with energy drink consumption, especially in high-risk adolescents and frequent energy drink consumers, may decrease the frequency of symptoms experienced by adolescents, such as headache and difficulty breathing, requiring medical evaluation.

Energy Use in China: Sectoral Trends and Future Outlook

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Nan; McNeil, Michael A.; Fridley, David

2007-10-04

This report provides a detailed, bottom-up analysis ofenergy consumption in China. It recalibrates official Chinese governmentstatistics by reallocating primary energy into categories more commonlyused in international comparisons. It also provides an analysis of trendsin sectoral energy consumption over the past decades. Finally, itassesses the future outlook for the critical period extending to 2020,based on assumptions of likely patterns of economic activity,availability of energy services, and energy intensities. The followingare some highlights of the study's findings: * A reallocation of sectorenergy consumption from the 2000 official Chinese government statisticsfinds that: * Buildings account for 25 percent of primary energy, insteadof 19more » percent * Industry accounts for 61 percent of energy instead of 69percent * Industrial energy made a large and unexpected leap between2000-2005, growing by an astonishing 50 percent in the 3 years between2002 and 2005. * Energy consumption in the iron and steel industry was 40percent higher than predicted * Energy consumption in the cement industrywas 54 percent higher than predicted * Overall energy intensity in theindustrial sector grew between 2000 and 2003. This is largely due tointernal shifts towards the most energy-intensive sub-sectors, an effectwhich more than counterbalances the impact of efficiency increases. *Industry accounted for 63 percent of total primary energy consumption in2005 - it is expected to continue to dominate energy consumption through2020, dropping only to 60 percent by that year. * Even assuming thatgrowth rates in 2005-2020 will return to the levels of 2000-2003,industrial energy will grow from 42 EJ in 2005 to 72 EJ in 2020. * Thepercentage of transport energy used to carry passengers (instead offreight) will double from 37 percent to 52 percent between 2000 to 2020,.Much of this increase is due to private car ownership, which willincrease by a factor of 15 from 5.1 million in 2000 to 77 million in2020. * Residential appliance ownership will show signs of saturation inurban households. The increase in residential energy consumption will belargely driven by urbanization, since rural homes will continue to havelow consumption levels. In urban households, the size of appliances willincrease, but its effect will be moderated by efficiency improvements,partially driven by government standards. * Commercial energy increaseswill be driven both by increases in floor space and by increases inpenetration of major end uses such as heating and cooling. Theseincreases will be moderated somewhat, however, by technology changes,such as increased use of heat pumps. * China's Medium- and Long-TermDevelopment plan drafted by the central government and published in 2004calls for a quadrupling of GDP in the period from 2000-2020 with only adoubling in energy consumption during the same period. A bottom-upanalysis with likely efficiency improvements finds that energyconsumption will likely exceed the goal by 26.12 EJ, or 28 percent.Achievements of these goals will there fore require a more aggressivepolicy of encouraging energy efficiency.« less

Annual Energy Review 1999

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seiferlein, Katherine E.

A generation ago the Ford Foundation convened a group of experts to explore and assess the Nation’s energy future, and published their conclusions in A Time To Choose: America’s Energy Future (Cambridge, MA: Ballinger, 1974). The Energy Policy Project developed scenarios of U.S. potential energy use in 1985 and 2000. Now, with 1985 well behind us and 2000 nearly on the record books, it may be of interest to take a look back to see what actually happened and consider what it means for our future. The study group sketched three primary scenarios with differing assumptions about the growth ofmore » energy use. The Historical Growth scenario assumed that U.S. energy consumption would continue to expand by 3.4 percent per year, the average rate from 1950 to 1970. This scenario assumed no intentional efforts to change the pattern of consumption, only efforts to encourage development of our energy supply. The Technical Fix scenario anticipated a “conscious national effort to use energy more efficiently through engineering know-how." The Zero Energy Growth scenario, while not clamping down on the economy or calling for austerity, incorporated the Technical Fix efficiencies plus additional efficiencies. This third path anticipated that economic growth would depend less on energy-intensive industries and more on those that require less energy, i.e., the service sector. In 2000, total energy consumption was projected to be 187 quadrillion British thermal units (Btu) in the Historical Growth case, 124 quadrillion Btu in the Technical Fix case, and 100 quadrillion Btu in the Zero Energy Growth case. The Annual Energy Review 1999 reports a preliminary total consumption for 1999 of 97 quadrillion Btu (see Table 1.1), and the Energy Information Administration’s Short-Term Energy Outlook (April 2000) forecasts total energy consumption of 98 quadrillion Btu in 2000. What energy consumption path did the United States actually travel to get from 1974, when the scenarios were drawn, to the end of the century? What happened to the relationship between growth and energy consumption? How did the fuel mix change over this period? What are the effects of energy usage on our environment? What level of consumption will the United States—and the world—record in the Annual Energy Review 2025? We present this edition of the Annual Energy Review to help investigate these important questions and to stimulate and inform our thinking about what the future holds.« less

Analysis of electric energy consumption of automatic milking systems in different configurations and operative conditions.

PubMed

Calcante, Aldo; Tangorra, Francesco M; Oberti, Roberto

2016-05-01

Automatic milking systems (AMS) have been a revolutionary innovation in dairy cow farming. Currently, more than 10,000 dairy cow farms worldwide use AMS to milk their cows. Electric consumption is one of the most relevant and uncontrollable operational cost of AMS, ranging between 35 and 40% of their total annual operational costs. The aim of the present study was to measure and analyze the electric energy consumption of 4 AMS with different configurations: single box, central unit featuring a central vacuum system for 1 cow unit and for 2 cow units. The electrical consumption (daily consumption, daily consumption per cow milked, consumption per milking, and consumption per 100L of milk) of each AMS (milking unit + air compressor) was measured using 2 energy analyzers. The measurement period lasted 24h with a sampling frequency of 0.2Hz. The daily total energy consumption (milking unit + air compressor) ranged between 45.4 and 81.3 kWh; the consumption per cow milked ranged between 0.59 and 0.99 kWh; the consumption per milking ranged between 0.21 and 0.33 kWh; and the consumption per 100L of milk ranged between 1.80 to 2.44 kWh according to the different configurations and operational contexts considered. Results showed that AMS electric consumption was mainly conditioned by farm management rather than machine characteristics/architectures. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Modelling Electrical Energy Consumption in Automotive Paint Shop

NASA Astrophysics Data System (ADS)

Oktaviandri, Muchamad; Safiee, Aidil Shafiza Bin

2018-03-01

Industry players are seeking ways to reduce operational cost to sustain in a challenging economic trend. One key aspect is an energy cost reduction. However, implementing energy reduction strategy often struggle with obstructions, which slow down their realization and implementation. Discrete event simulation method is an approach actively discussed in current research trend to overcome such obstructions because of its flexibility and comprehensiveness. Meanwhile, in automotive industry, paint shop is considered the most energy consumer area which is reported consuming about 50%-70% of overall automotive plant consumption. Hence, this project aims at providing a tool to model and simulate energy consumption at paint shop area by conducting a case study at XYZ Company, one of the automotive companies located at Pekan, Pahang. The simulation model was developed using Tecnomatix Plant Simulation software version 13. From the simulation result, the model was accurately within ±5% for energy consumption and ±15% for maximum demand after validation with real system. Two different energy saving scenarios were tested. Scenario 1 was based on production scheduling approach under low demand situation which results energy saving up to 30% on the consumption. Meanwhile scenario 2 was based on substituting high power compressor with the lower power compressor. The results were energy consumption saving of approximately 1.42% and maximum demand reduction about 1.27%. This approach would help managers and engineers to justify worthiness of investment for implementing the reduction strategies.

Consumption of Energy in New York State: 1972 (with Estimates for 1973).

ERIC Educational Resources Information Center

Hausgaard, Olaf

This report contains tabular data on energy consumption for the calendar year 1972 and a forecast of natural gas requirements for the period 1973 to 1976. Broad sector categories used in the tables are electric utilities, residential commercial, industrial, and transportation. Tables show energy consumption by primary source and major sector for…

Water Data Collection in the 2007 CBECS

EIA Publications

2012-01-01

The 2007 round of the Commercial Buildings Energy Consumption Survey (CBECS) was the first time in the 30 year CBECS history that questions about water consumption were asked of respondents. The Energy Information Administration (EIA), in cooperation with the Environmental Protection Agency (EPA), added these questions to the CBECS because water and energy consumption are connected in many ways.

75 FR 37593 - Energy Conservation Program for Consumer Products: Test Procedures for Clothes Dryers and Room...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-29

... consumption in clothes dryers and room air conditioners. In addition, DOE is proposing to adopt definitions of... Modes and Off Mode a. Clothes Dryers b. Room Air Conditioners 5. Measures of Energy Consumption a... Gas Dryer Continuously Burning Pilot Light Gas Energy Consumption 9. Clarification of the Gas Supply...

10 CFR 431.134 - Uniform test methods for the measurement of energy and water consumption of automatic commercial...

Code of Federal Regulations, 2013 CFR

2013-01-01

... water consumption of automatic commercial ice makers. 431.134 Section 431.134 Energy DEPARTMENT OF... Automatic Commercial Ice Makers Test Procedures § 431.134 Uniform test methods for the measurement of energy and water consumption of automatic commercial ice makers. (a) Scope. This section provides the test...

10 CFR 431.134 - Uniform test methods for the measurement of energy and water consumption of automatic commercial...

Code of Federal Regulations, 2014 CFR

2014-01-01

... water consumption of automatic commercial ice makers. 431.134 Section 431.134 Energy DEPARTMENT OF... Automatic Commercial Ice Makers Test Procedures § 431.134 Uniform test methods for the measurement of energy and water consumption of automatic commercial ice makers. (a) Scope. This section provides the test...

Oxygen Consumption by Red Wines. Part I: Consumption Rates, Relationship with Chemical Composition, and Role of SO₂.

PubMed

Ferreira, Vicente; Carrascon, Vanesa; Bueno, Mónica; Ugliano, Maurizio; Fernandez-Zurbano, Purificación

2015-12-30

Fifteen Spanish red wines extensively characterized in terms of SO2, color, antioxidant indexes, metals, and polyphenols were subjected to five consecutive sensor-controlled cycles of air saturation at 25 °C. Within each cycle, O2 consumption rates cannot be interpreted by simple kinetic models. Plots of cumulated consumed O2 made it possible to define a fast and highly wine-dependent initial O2 consumption rate and a second and less variable average O2 consumption rate which remains constant in saturations 2 to 5. Both rates have been satisfactorily modeled, and in both cases they were independent of Fe and SO2 and highly dependent on Cu levels. Average rates were also related to Mn, pH, Folin, protein precipitable proanthocyanidins (PPAs), and polyphenolic profile. Initial rates were strong and negatively correlated to SO2 consumption, indicating that such an initial rate is either controlled by an unknown antioxidant present in some wines or affected by a poor real availability of SO2. Remaining unreacted SO2 is proportional to initial combined SO2 and to final free acetaldehyde.

Assessment of the Energy Impacts of Improving Highway-Infrastructure Materials

DOT National Transportation Integrated Search

1995-04-01

Argonne National Laboratory has conducted a study to ascertain the relative importance of improved highway materials compared to vehicle energy consumption on U.S. energy consumption. Energy savings through an improved highway infrastructure can occu...

Energy minimization of mobile video devices with a hardware H.264/AVC encoder based on energy-rate-distortion optimization

NASA Astrophysics Data System (ADS)

Kang, Donghun; Lee, Jungeon; Jung, Jongpil; Lee, Chul-Hee; Kyung, Chong-Min

2014-09-01

In mobile video systems powered by battery, reducing the encoder's compression energy consumption is critical to prolong its lifetime. Previous Energy-rate-distortion (E-R-D) optimization methods based on a software codec is not suitable for practical mobile camera systems because the energy consumption is too large and encoding rate is too low. In this paper, we propose an E-R-D model for the hardware codec based on the gate-level simulation framework to measure the switching activity and the energy consumption. From the proposed E-R-D model, an energy minimizing algorithm for mobile video camera sensor have been developed with the GOP (Group of Pictures) size and QP(Quantization Parameter) as run-time control variables. Our experimental results show that the proposed algorithm provides up to 31.76% of energy consumption saving while satisfying the rate and distortion constraints.

Leanergy(TM): how lean manufacturing can improve energy efficiency.

PubMed

Riche, Jean-Pierre

2013-01-01

Energy efficiency has become a competitive issue for industrial companies. The evolution of energy prices and regulation will make this issue even more important in the future. For several years, the energy-intensive chemical industry has been implementing corrective actions. Helped by the absorption of base load energy consumption by larger production volumes, specific energy consumption (KWh per production unit) has been significantly reduced in recent years. However, most plants have reached the end of their first action plan based on improving the utilities performance. The Leanergy(TM) method developed by the consultancy company Okavango-energy, is a structured approach based on lean manufacturing which widens the scope of saving sources to process and operations. Starting from the analysis of actual production requirements, Okavango is able to adjust consumption to minimum requirements and so remove any energy consumption that does not contribute to the added value creation.

Energy Consumption vs. Energy Requirement

ERIC Educational Resources Information Center

Fan, L. T.; Zhang, Tengyan; Schlup, John R.

2006-01-01

Energy is necessary for any phenomenon to occur or any process to proceed. Nevertheless, energy is never consumed; instead, it is conserved. What is consumed is available energy, or exergy, accompanied by an increase in entropy. Obviously, the terminology, "energy consumption" is indeed a misnomer although it is ubiquitous in the…

Uncertainties in predicting energy consumption in houses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Penz, A.J.; Yasky, Y.

1979-01-01

Many efforts are underway to develop public and private sector programs to encourage energy conservation in existing housing. The effectiveness of these programs, which range from public persuasion to implementation of building-performance codes, depends on the ability of their designers to identify at an aggregate level energy-conservation techniques that are economically viable on an individual-household level. Whereas information on average energy consumption per household forms the basis for many conservation programs, variations in household energy consumption threaten to weaken the impact of programs that are too general. Differences in weather, house site conditions, house design and condition, and household behaviormore » are all likely to influence the benefits derived from conservation actions. This paper focuses on sources of variance in household energy consumption and their impact on the effectiveness of various energy-conservation strategies. 45 references.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Poyer, D.A.

In this report, tests of statistical significance of five sets of variables with household energy consumption (at the point of end-use) are described. Five models, in sequence, were empirically estimated and tested for statistical significance by using the Residential Energy Consumption Survey of the US Department of Energy, Energy Information Administration. Each model incorporated additional information, embodied in a set of variables not previously specified in the energy demand system. The variable sets were generally labeled as economic variables, weather variables, household-structure variables, end-use variables, and housing-type variables. The tests of statistical significance showed each of the variable sets tomore » be highly significant in explaining the overall variance in energy consumption. The findings imply that the contemporaneous interaction of different types of variables, and not just one exclusive set of variables, determines the level of household energy consumption.« less

Steel industry energy consumption: Sensitivity to technology choice, fuel prices, and carbon prices

EIA Publications

2016-01-01

Steel industry energy consumption in 2010 totaled 1,158 trillion British thermal units (Btu), representing 8% of total manufacturing energy consumption. Energy consumption in the steel industry is largely for crude steel production using basic oxygen furnace (BOF) and electric arc furnace (EAF) technologies. Overall energy intensity in EAF, used primarily to melt scrap steel, is significantly lower than in BOF which is used to create virgin steel from iron ore. Over the past two decades, a shift from BOF to EAF has contributed to a substantial reduction in the energy intensity of the U.S. steel industry. From 1991 to 2010, the EAF share of total U.S. steel production in physical units increased from 38% to 61%, and the overall energy intensity of crude steel production in Btu per metric ton decreased by 37%.

Documenting helicopter operations from an energy standpoint

NASA Technical Reports Server (NTRS)

Davis, S. J.; Stepniewski, W. Z.

1974-01-01

Results are presented of a study of the relative and absolute energy consumption of helicopters, including limited comparisons with fixed-wing aircraft, and selected surface transportation vehicles. Additional comparisons were made to determine the level of reduction in energy consumption expected from the application of advanced technologies to the helicopter design and sizing process. It was found that improvements in helicopter consumption characteristics can be accomplished through the utilization of advanced technology to reduce drag, structures weight, and powerplant fuel consumption.

An Assessment of EIA's Building Consumption Data

EIA Publications

2012-01-01

The U.S. Energy Information Administration (EIA) routinely uses feedback from customers and outside experts to help improve its programs and products. As part of an assessment of its consumption surveys, EIA reached out to the National Academy of Sciences' Committee on National Statistics (CNSTAT) asking them to assess the Commercial Buildings Energy Consumption Survey (CBECS) and the Residential Energy Consumption Survey (RECS) and recommend improvements in data quality, geographic coverage, timeliness of data releases, and relevance of data for users.

A Review of the Literature on Policies Directed at the Youth Consumption of Sugar Sweetened Beverages123

PubMed Central

Levy, David T.; Friend, Karen B.; Wang, Y. Claire

2011-01-01

Sugar sweetened beverages (SSB) constitute a large percentage of energy consumed by youth. This paper reviews the literature on school nutrition policies and price interventions directed at youth SSB consumption. In addition to considering the direct effect of policies on SSB consumption, we provide an overview of the literature on how SSB consumption affects total energy intake (TEI) and BMI, as well as on how TEI affects BMI. By considering each of these links, we attempted to gauge the effect of policies directed at SSB consumption, as well as highlight areas that merit future research. We found that school nutrition and price policies reduce SSB consumption and that reduced SSB consumption is associated with a reduction in energy intake that can influence BMI. Policies directed at SSB consumption can play an important role in reducing youth overweight and obesity. PMID:22332051

Energy, water and fish: biodiversity impacts of energy-sector water demand in the United States depend on efficiency and policy measures.

PubMed

McDonald, Robert I; Olden, Julian D; Opperman, Jeffrey J; Miller, William M; Fargione, Joseph; Revenga, Carmen; Higgins, Jonathan V; Powell, Jimmie

2012-01-01

Rising energy consumption in coming decades, combined with a changing energy mix, have the potential to increase the impact of energy sector water use on freshwater biodiversity. We forecast changes in future water use based on various energy scenarios and examine implications for freshwater ecosystems. Annual water withdrawn/manipulated would increase by 18-24%, going from 1,993,000-2,628,000 Mm(3) in 2010 to 2,359,000-3,271,000 Mm(3) in 2035 under the Reference Case of the Energy Information Administration (EIA). Water consumption would more rapidly increase by 26% due to increased biofuel production, going from 16,700-46,400 Mm(3) consumption in 2010 to 21,000-58,400 Mm(3) consumption in 2035. Regionally, water use in the Southwest and Southeast may increase, with anticipated decreases in water use in some areas of the Midwest and Northeast. Policies that promote energy efficiency or conservation in the electric sector would reduce water withdrawn/manipulated by 27-36 m(3)GJ(-1) (0.1-0.5 m(3)GJ(-1) consumption), while such policies in the liquid fuel sector would reduce withdrawal/manipulation by 0.4-0.7 m(3)GJ(-1) (0.2-0.3 m(3)GJ(-1) consumption). The greatest energy sector withdrawal/manipulation are for hydropower and thermoelectric cooling, although potential new EPA rules that would require recirculating cooling for thermoelectric plants would reduce withdrawal/manipulation by 441,000 Mm(3) (20,300 Mm(3) consumption). The greatest consumptive energy sector use is evaporation from hydroelectric reservoirs, followed by irrigation water for biofuel feedstocks and water used for electricity generation from coal. Historical water use by the energy sector is related to patterns of fish species endangerment, where water resource regions with a greater fraction of available surface water withdrawn by hydropower or consumed by the energy sector correlated with higher probabilities of imperilment. Since future increases in energy-sector surface water use will occur in areas of high fish endemism (e.g., Southeast), additional management and policy actions will be needed to minimize further species imperilment.

The global contribution of energy consumption by product exports from China.

PubMed

Tang, Erzi; Peng, Chong

2017-06-01

This paper presents a model to analyze the mechanism of the global contribution of energy usage by product exports. The theoretical analysis is based on the perspective that contribution estimates should be in relatively smaller sectors in which the production characteristics could be considered, such as the productivity distribution for each sector. Then, we constructed a method to measure the global contribution of energy usage. The simple method to estimate the global contribution is the percentage of goods export volume compared to the GDP as a multiple of total energy consumption, but this method underestimates the global contribution because it ignores the structure of energy consumption and product export in China. According to our measurement method and based on the theoretical analysis, we calculated the global contribution of energy consumption only by industrial manufactured product exports in a smaller sector per industry or manufacturing sector. The results indicated that approximately 42% of the total energy usage in the whole economy for China in 2013 was contributed to foreign regions. Along with the primary products and service export in China, the global contribution of energy consumption for China in 2013 by export was larger than 42% of the total energy usage.

International energy outlook 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-05-01

This International Energy Outlook presents historical data from 1970 to 1993 and EIA`s projections of energy consumption and carbon emissions through 2015 for 6 country groups. Prospects for individual fuels are discussed. Summary tables of the IEO96 world energy consumption, oil production, and carbon emissions projections are provided in Appendix A. The reference case projections of total foreign energy consumption and of natural gas, coal, and renewable energy were prepared using EIA`s World Energy Projection System (WEPS) model. Reference case projections of foreign oil production and consumption were prepared using the International Energy Module of the National Energy Modeling Systemmore » (NEMS). Nuclear consumption projections were derived from the International Nuclear Model, PC Version (PC-INM). Alternatively, nuclear capacity projections were developed using two methods: the lower reference case projections were based on analysts` knowledge of the nuclear programs in different countries; the upper reference case was generated by the World Integrated Nuclear Evaluation System (WINES)--a demand-driven model. In addition, the NEMS Coal Export Submodule (CES) was used to derive flows in international coal trade. As noted above, foreign projections of electricity demand are now projected as part of the WEPS. 64 figs., 62 tabs.« less

A low-cost method for estimating energy expenditure during soccer refereeing.

PubMed

Ardigò, Luca Paolo; Padulo, Johnny; Zuliani, Andrea; Capelli, Carlo

2015-01-01

This study aimed to apply a validated bioenergetics model of sprint running to recordings obtained from commercial basic high-sensitivity global positioning system receivers to estimate energy expenditure and physical activity variables during soccer refereeing. We studied five Italian fifth division referees during 20 official matches while carrying the receivers. By applying the model to the recorded speed and acceleration data, we calculated energy consumption during activity, mass-normalised total energy consumption, total distance, metabolically equivalent distance and their ratio over the entire match and the two halves. Main results were as follows: (match) energy consumption = 4729 ± 608 kJ, mass normalised total energy consumption = 74 ± 8 kJ · kg(-1), total distance = 13,112 ± 1225 m, metabolically equivalent distance = 13,788 ± 1151 m and metabolically equivalent/total distance = 1.05 ± 0.05. By using a very low-cost device, it is possible to estimate the energy expenditure of soccer refereeing. The provided predicting mass-normalised total energy consumption versus total distance equation can supply information about soccer refereeing energy demand.

Energy use of televisions and video cassette recorders in the U.S.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meier, Alan; Rosen, Karen

1999-03-01

In an effort to more accurately determine nationwide energy consumption, the U.S. Department of Energy has recently commissioned studies with the goal of improving its understanding of the energy use of appliances in the miscellaneous end-use category. This study presents an estimate of the residential energy consumption of two of the most common domestic appliances in the miscellaneous end-use category: color televisions (TVs) and video cassette recorders (VCRs). The authors used a bottom-up approach in estimating national TV and VCR energy consumption. First, they obtained estimates of stock and usage from national surveys, while TV and VCR power measurements andmore » other data were recorded at repair and retail shops. Industry-supplied shipment and sales distributions were then used to minimize bias in the power measurement samples. To estimate national TV and VCR energy consumption values, ranges of power draw and mode usage were created to represent situations in homes with more than one unit. Average energy use values for homes with one unit, two units, etc. were calculated and summed to provide estimates of total national TV and VCR energy consumption.« less

Consumption of Energy Drinks among Undergraduate Students in Taiwan: Related Factors and Associations with Substance Use.

PubMed

Chang, Yen-Jung; Peng, Ching-Yi; Lan, Yu-Ching

2017-08-24

Background : This study aimed to investigate the consumption of energy drinks and associated factors among undergraduate students in Taiwan. Methods : Data came from a cross-sectional survey conducted in 2015. Eligible participants completed a self-administered questionnaire assessing use and perceptions of energy drinks, tobacco, alcohol, and betel nut. Results : Among 606 surveyed undergraduate students, 24.8% reported consuming energy drinks in the past 30 days. The major reasons for use included keeping alert at work (48.7%), being curious about the products (32.0%), enjoying the flavor (31.3%), or preparing for school exams (26.7%). Among energy drink users, half have never read the nutrition label, and 15.3% reported that they had ever mixed energy drinks with alcohol. Most participants showed negative attitudes toward using tobacco, alcohol, or betel nut, while 54.1% reported positive attitudes toward consuming energy drinks. Being male, living away from parents' home, tobacco use, alcohol use, and positive perceptions of energy drink's effects significantly predicted energy drink consumption. Conclusions : In addition to exploring motivations of energy drink consumption in undergraduate students in Taiwan, the study findings indicated that energy drink consumption might relate to the use of tobacco and alcohol, which should be taken into account in substance use prevention programs.

Energy-Filtered Tunnel Transistor: A New Device Concept Toward Extremely-Low Energy Consumption Electronics

DTIC Science & Technology

2015-12-17

temperature . New device architecture that utilizes cold-electron transport for ultra-low energy consumption electronics has been designed in a configuration...the oxygen has also been found important for the SiC>2 sputter deposition. The sputter was carried out at room temperature . Our optimized process...have been pursued for two electronic devices, 1) room- temperature single-electron transistors, and 2) ultralow energy consumption transistors. For

Carbon dioxide emissions, output, and energy consumption categories in Algeria.

PubMed

Amri, Fethi

2017-06-01

This study examines the relation between CO 2 emissions, income, non-renewable, and renewable energy consumption in Algeria during the period extending from 1980 to 2011. Our work gives particular attention to the validity of environmental Kuznets curve (EKC) hypothesis. The autoregressive distributed lag (ARDL) with break point method outcome demonstrates the positive effect of non-renewable type of energy on CO 2 emissions consumption. On the contrary, the results reveal an insignificant effect of renewable energy on environment improvement. Moreover, the results accept the existence of EKC hypothesis but the highest gross domestic product value in logarithm scale of our data is inferior to the estimated turning point. Consequently, policy-makers in Algeria should expand the ratio of renewable energy and should decrease the quota of non-renewable energy consumption.

Investigating energy consumption of coastal vacation rental homes

NASA Astrophysics Data System (ADS)

Myers, Sam

In 2007, vacation rental properties in the United States accounted for more than 22% of the domestic lodging market. These properties are a unique segment of the lodging industry due to their residential design and commercial use. Coastal vacation rental properties represent the largest supply, demand and value of the nation's vacation rental supply. In the case of North Carolina's Outer Banks, tourism is the area's largest source of income, with vacation real estate agencies being the largest accommodation provider. This study uses a multiple regression analysis to investigate the energy consumption of 30 vacation rental homes on Hatteras Island. Hatteras Island's abundant supply of vacation rental homes provided a diverse sample to study energy consumption with a wide range of houses regarding size, age, and location. Since very little research has been conducted on the energy consumption of vacation rental homes, this study aims to contribute detailed information regarding the energy consumption of unique accommodation sector.

The causal link among militarization, economic growth, CO2 emission, and energy consumption.

PubMed

Bildirici, Melike E

2017-02-01

This paper examines the long-run and the causal relationship among CO 2 emissions, militarization, economic growth, and energy consumption for USA for the period 1960-2013. Using the bound test approach to cointegration, a short-run as well as a long-run relationship among the variables with a positive and a statistically significant relationship between CO 2 emissions and militarization was found. To determine the causal link, MWALD and Rao's F tests were applied. According to Rao's F tests, the evidence of a unidirectional causality running from militarization to CO 2 emissions, from energy consumption to CO 2 emissions, and from militarization to energy consumption all without a feedback was found. Further, the results determined that 26% of the forecast-error variance of CO 2 emissions was explained by the forecast error variance of militarization and 60% by energy consumption.

Motives for mixing alcohol with energy drinks and other nonalcoholic beverages, and consequences for overall alcohol consumption.

PubMed

Verster, Joris C; Benson, Sarah; Scholey, Andrew

2014-01-01

The aim of this survey was to assess the motives for energy drink consumption, both alone and mixed with alcohol, and to determine whether negative or neutral motives for consuming alcohol mixed with energy drinks (AMED) have a differential effect on overall alcohol consumption. Demographics, alcohol and energy drink consumption-related questions, and motives for the consumption of energy drinks (alone or mixed with alcohol) were assessed. The motives to mix alcohol with energy drinks were compared with those for mixing alcohol with other nonalcoholic beverages. A total of 2,329 students who completed the study consumed energy drinks. The motives for consuming energy drinks (without alcohol) included "I like the taste" (58.6%), "To keep me awake" (54.3%), "It gives me energy" (44.3%), "It helps concentrating when studying" (33.9%), "It increases alertness" (28.8%), "It helps me concentrate better" (20.6%), and "It makes me less sleepy when driving" (14.2%). A total of 1,239 students reported occasionally consuming AMED (AMED group). The most frequent motives included "I like the taste" (81.1%), "I wanted to drink something else" (35.3%), and "To celebrate a special occasion" (14.6%). No relevant differences in motives were observed for using an energy drink or another nonalcoholic beverage as a mixer. A minority of students (21.6%) reported at least one negative motive to consume AMED. Despite these negative motives, students reported consuming significantly less alcohol on occasions when they consumed AMED compared to alcohol-only occasions. The majority of students who consume energy drinks (without alcohol) do so because they like the taste, or they consume these drinks to keep them awake and give them energy. AMED consumption is more frequently motivated by neutral as opposed to negative motives. No relevant differences in drinking motives and overall alcohol consumption were observed between the occasions when energy drinks or other nonalcoholic beverages were mixed with alcohol.

Initial Business Case Analysis of Two Integrated Heat Pump HVAC Systems for Near-Zero-Energy Homes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baxter, Van D

2006-11-01

The long range strategic goal of the Department of Energy's Building Technologies (DOE/BT) Program is to create, by 2020, technologies and design approaches that enable the construction of net-zero energy homes at low incremental cost (DOE/BT 2005). A net zero energy home (NZEH) is a residential building with greatly reduced needs for energy through efficiency gains, with the balance of energy needs supplied by renewable technologies. While initially focused on new construction, these technologies and design approaches are intended to have application to buildings constructed before 2020 as well resulting in substantial reduction in energy use for all building typesmore » and ages. DOE/BT's Emerging Technologies (ET) team is working to support this strategic goal by identifying and developing advanced heating, ventilating, air-conditioning, and water heating (HVAC/WH) technology options applicable to NZEHs. Although the energy efficiency of heating, ventilating, and air-conditioning (HVAC) equipment has increased substantially in recent years, new approaches are needed to continue this trend. Dramatic efficiency improvements are necessary to enable progress toward the NZEH goals, and will require a radical rethinking of opportunities to improve system performance. The large reductions in HVAC energy consumption necessary to support the NZEH goals require a systems-oriented analysis approach that characterizes each element of energy consumption, identifies alternatives, and determines the most cost-effective combination of options. In particular, HVAC equipment must be developed that addresses the range of special needs of NZEH applications in the areas of reduced HVAC and water heating energy use, humidity control, ventilation, uniform comfort, and ease of zoning. In FY05 ORNL conducted an initial Stage 1 (Applied Research) scoping assessment of HVAC/WH systems options for future NZEHs to help DOE/BT identify and prioritize alternative approaches for further development. Eleven system concepts with central air distribution ducting and nine multi-zone systems were selected and their annual and peak demand performance estimated for five locations: Atlanta (mixed-humid), Houston (hot-humid), Phoenix (hot-dry), San Francisco (marine), and Chicago (cold). Performance was estimated by simulating the systems using the TRNSYS simulation engine (Solar Energy Laboratory et al. 2006) in two 1800-ft{sup 2} houses--a Building America (BA) benchmark house and a prototype NZEH taken from BEopt results at the take-off (or crossover) point (i.e., a house incorporating those design features such that further progress towards ZEH is through the addition of photovoltaic power sources, as determined by current BEopt analyses conducted by NREL). Results were summarized in a project report, 'HVAC Equipment Design options for Near-Zero-Energy Homes--A Stage 2 Scoping Assessment,' ORNL/TM-2005/194 (Baxter 2005). The 2005 study report describes the HVAC options considered, the ranking criteria used, and the system rankings by priority. Table 1 summarizes the energy savings potential of the highest scoring options from the 2005 study for all five locations.« less

A multipath routing protocol based on clustering and ant colony optimization for wireless sensor networks.

PubMed

Yang, Jing; Xu, Mai; Zhao, Wei; Xu, Baoguo

2010-01-01

For monitoring burst events in a kind of reactive wireless sensor networks (WSNs), a multipath routing protocol (MRP) based on dynamic clustering and ant colony optimization (ACO) is proposed. Such an approach can maximize the network lifetime and reduce the energy consumption. An important attribute of WSNs is their limited power supply, and therefore some metrics (such as energy consumption of communication among nodes, residual energy, path length) were considered as very important criteria while designing routing in the MRP. Firstly, a cluster head (CH) is selected among nodes located in the event area according to some parameters, such as residual energy. Secondly, an improved ACO algorithm is applied in the search for multiple paths between the CH and sink node. Finally, the CH dynamically chooses a route to transmit data with a probability that depends on many path metrics, such as energy consumption. The simulation results show that MRP can prolong the network lifetime, as well as balance of energy consumption among nodes and reduce the average energy consumption effectively.

10 CFR 434.521 - The simulation tool.

Code of Federal Regulations, 2012 CFR

2012-01-01

... of the building including night setback during various times of the year; and 521.1.5Energy consumption information at a level necessary to determine the Energy Cost Budget and Design Energy Cost... buildings. In addition, models shall be capable of translating the Design Energy Consumption into energy...

10 CFR 434.521 - The simulation tool.

Code of Federal Regulations, 2013 CFR

2013-01-01

... of the building including night setback during various times of the year; and 521.1.5Energy consumption information at a level necessary to determine the Energy Cost Budget and Design Energy Cost... buildings. In addition, models shall be capable of translating the Design Energy Consumption into energy...

10 CFR 434.521 - The simulation tool.

Code of Federal Regulations, 2010 CFR

2010-01-01

... of the building including night setback during various times of the year; and 521.1.5Energy consumption information at a level necessary to determine the Energy Cost Budget and Design Energy Cost... buildings. In addition, models shall be capable of translating the Design Energy Consumption into energy...

10 CFR 434.521 - The simulation tool.

Code of Federal Regulations, 2011 CFR

2011-01-01

... of the building including night setback during various times of the year; and 521.1.5Energy consumption information at a level necessary to determine the Energy Cost Budget and Design Energy Cost... buildings. In addition, models shall be capable of translating the Design Energy Consumption into energy...

Changing Our Energy Behavior

ERIC Educational Resources Information Center

Hogan, M. Janice

1978-01-01

Three case studies involving a high, medium, and low-energy family are presented to illustrate the relationship among family lifestyles, decision making, and energy consumption practices. The author discusses ways the family can conserve in both direct and indirect energy consumption and how home economists are helping families adopt energy-saving…

Analysis of the heavy oil production technology effectiveness using natural thermal convection with heat agent recirculation method in reservoirs with varying initial water saturation

NASA Astrophysics Data System (ADS)

Osnos, V. B.; Kuneevsky, V. V.; Larionov, V. M.; Saifullin, E. R.; Gainetdinov, A. V.; Vankov, Yu V.; Larionova, I. V.

2017-01-01

The method of natural thermal convection with heat agent recirculation (NTC HAR) in oil reservoirs is described. The analysis of the effectiveness of this method for oil reservoir heating with the values of water saturation from 0 to 0.5 units is conducted. As the test element Ashalchinskoye oil field is taken. CMG STARS software was used for calculations. Dynamics of cumulative production, recovery factor and specific energy consumption per 1 m3 of crude oil produced in the application of the heat exchanger with heat agent in cases of different initial water saturation are defined and presented as graphs.

Energy management of a university campus utilizing short-term load forecasting with an artificial neural network

NASA Astrophysics Data System (ADS)

Palchak, David

Electrical load forecasting is a tool that has been utilized by distribution designers and operators as a means for resource planning and generation dispatch. The techniques employed in these predictions are proving useful in the growing market of consumer, or end-user, participation in electrical energy consumption. These predictions are based on exogenous variables, such as weather, and time variables, such as day of week and time of day as well as prior energy consumption patterns. The participation of the end-user is a cornerstone of the Smart Grid initiative presented in the Energy Independence and Security Act of 2007, and is being made possible by the emergence of enabling technologies such as advanced metering infrastructure. The optimal application of the data provided by an advanced metering infrastructure is the primary motivation for the work done in this thesis. The methodology for using this data in an energy management scheme that utilizes a short-term load forecast is presented. The objective of this research is to quantify opportunities for a range of energy management and operation cost savings of a university campus through the use of a forecasted daily electrical load profile. The proposed algorithm for short-term load forecasting is optimized for Colorado State University's main campus, and utilizes an artificial neural network that accepts weather and time variables as inputs. The performance of the predicted daily electrical load is evaluated using a number of error measurements that seek to quantify the best application of the forecast. The energy management presented utilizes historical electrical load data from the local service provider to optimize the time of day that electrical loads are being managed. Finally, the utilization of forecasts in the presented energy management scenario is evaluated based on cost and energy savings.

Optimizing energy for a ‘green’ vaccine supply chain

PubMed Central

Lloyd, John; McCarney, Steve; Ouhichi, Ramzi; Lydon, Patrick; Zaffran, Michel

2015-01-01

This paper describes an approach piloted in the Kasserine region of Tunisia to increase the energy efficiency of the distribution of vaccines and temperature sensitive drugs. The objectives of an approach, known as the ‘net zero energy’ (NZE) supply chain were demonstrated within the first year of operation. The existing distribution system was modified to store vaccines and medicines in the same buildings and to transport them according to pre-scheduled and optimized delivery circuits. Electric utility vehicles, dedicated to the integrated delivery of vaccines and medicines, improved the regularity and reliability of the supply chains. Solar energy, linked to the electricity grid at regional and district stores, supplied over 100% of consumption meeting all energy needs for storage, cooling and transportation. Significant benefits to the quality and costs of distribution were demonstrated. Supply trips were scheduled, integrated and reliable, energy consumption was reduced, the recurrent cost of electricity was eliminated and the release of carbon to the atmosphere was reduced. Although the initial capital cost of scaling up implementation of NZE remain high today, commercial forecasts predict cost reduction for solar energy and electric vehicles that may permit a step-wise implementation over the next 7–10 years. Efficiency in the use of energy and in the deployment of transport is already a critical component of distribution logistics in both private and public sectors of industrialized countries. The NZE approach has an intensified rationale in countries where energy costs threaten the maintenance of public health services in areas of low population density. In these countries where the mobility of health personnel and timely arrival of supplies is at risk, NZE has the potential to reduce energy costs and release recurrent budget to other needs of service delivery while also improving the supply chain. PMID:25444811

Estimate of oxygen consumption and intracellular zinc concentration of human spermatozoa in relation to motility.

PubMed

Henkel, Ralf R; Defosse, Kerstin; Koyro, Hans-Wilhelm; Weissmann, Norbert; Schill, Wolf-Bernhard

2003-03-01

To investigate the human sperm oxygen/energy consumption and zinc content in relation to motility. In washed spermatozoa from 67 ejaculates, the oxygen consumption was determined. Following calculation of the total oxygen consumed by the Ideal Gas Law, the energy consumption of spermatozoa was calculated. In addition, the zinc content of the sperm was determined using an atomic absorption spectrometer. The resulting data were correlated to the vitality and motility. The oxygen consumption averaged 0.24 micromol/10(6) sperm x 24h, 0.28 micromol/10(6) live sperm x 24h and 0.85 micromol/10(6) live motile sperm x 24h. Further calculations revealed that sperm motility was the most energy consuming process (164.31 mJ/10(6) motile spermatozoa x 24h), while the oxygen consumption of the total spermatozoa was 46.06 mJ/10(6) spermatozoa x 24h. The correlation of the oxygen/energy consumption and zinc content with motility showed significant negative correlations (r= -0.759; P<0.0001 and r=-0.441; P<0.0001, respectively). However, when correlating sperm energy consumption with the zinc content, a significant positive relation (r=0.323; P=0.01) was observed. Poorly motile sperm are actually wasting the available energy. Moreover, our data clearly support the "Geometric Clutch Model" of the axoneme function and demonstrate the importance of the outer dense fibers for the generation of sperm motility, especially progressive motility.

Fast food consumption and gestational diabetes incidence in the SUN project.

PubMed

Dominguez, Ligia J; Martínez-González, Miguel A; Basterra-Gortari, Francisco Javier; Gea, Alfredo; Barbagallo, Mario; Bes-Rastrollo, Maira

2014-01-01

Gestational diabetes prevalence is increasing, mostly because obesity among women of reproductive age is continuously escalating. We aimed to investigate the incidence of gestational diabetes according to the consumption of fast food in a cohort of university graduates. The prospective dynamic "Seguimiento Universidad de Navarra" (SUN) cohort included data of 3,048 women initially free of diabetes or previous gestational diabetes who reported at least one pregnancy between December 1999 and March 2011. Fast food consumption was assessed through a validated 136-item semi-quantitative food frequency questionnaire. Fast food was defined as the consumption of hamburgers, sausages, and pizza. Three categories of fast food were established: low (0-3 servings/month), intermediate (>3 servings/month and ≤2 servings/week) and high (>2 servings/week). Non-conditional logistic regression models were used to adjust for potential confounders. We identified 159 incident cases of gestational diabetes during follow-up. After adjusting for age, baseline body mass index, total energy intake, smoking, physical activity, family history of diabetes, cardiovascular disease/hypertension at baseline, parity, adherence to Mediterranean dietary pattern, alcohol intake, fiber intake, and sugar-sweetened soft drinks consumption, fast food consumption was significantly associated with a higher risk of incident gestational diabetes, with multivariate adjusted OR of 1.31 (95% conficence interval [CI]:0.81-2.13) and 1.86 (95% CI: 1.13-3.06) for the intermediate and high categories, respectively, versus the lowest category of baseline fast food consumption (p for linear trend: 0.007). Our results suggest that pre-pregnancy higher consumption of fast food is an independent risk factor for gestational diabetes.

A US-China Interview Study: Biology Students' Argumentation and Explanation about Energy Consumption Issues

ERIC Educational Resources Information Center

Jin, Hui; Hokayem, Hayat; Wang, Sasha; Wei, Xin

2015-01-01

As China and the United States become the top two carbon emitters in the world, it is crucial for citizens in both countries to construct a sophisticated understanding of energy consumption issues. This interview study examines how U.S. and Chinese students compare in explaining and arguing about two critical energy consumption issues: burning…

A US-China Interview Study: Biology Students' Argumentation and Explanation about Energy Consumption Issues

ERIC Educational Resources Information Center

Jin, Hui; Hokayem, Hayat; Wang, Sasha; Wei, Xin

2016-01-01

As China and the United States become the top two carbon emitters in the world, it is crucial for citizens in both countries to construct a sophisticated understanding of energy consumption issues. This interview study examines how U.S. and Chinese students compare in explaining and arguing about two critical energy consumption issues: burning…

10 CFR Appendix P to Subpart B of... - Uniform Test Method for Measuring the Energy Consumption of Pool Heaters

Code of Federal Regulations, 2014 CFR

2014-01-01

... with section 5 of IEC 62301 (Second Edition) (incorporated by reference; see § 430.3) and the fossil... power consumption during the off mode, PW,OFF = 0, and the fossil fuel energy consumed during the off... 62301 (Second Edition) (incorporated by reference; see § 430.3), and the fossil fuel energy consumption...

The Analysis of Electrical Energy Consumption of the Impact Screwdriver During Assembly of Fixed Threaded Joints

NASA Astrophysics Data System (ADS)

Grinevich, I.; Nikishin, Vl.; Mozga, N.; Laitans, M.

2017-06-01

The paper deals with the possibilities of reducing the consumption of electrical energy of the impact screwdriver during the assembly of fixed threaded joints. The recommendations related to a decrease in electrical energy consumption would allow reducing product costs but so far there have been no such recommendations from the producers of the tool as to the effective operating regimes of the impact screwdrivers in relation to electrical energy consumption and necessary tightening moment of the nut. The aim of the study is to find out the economical operating mode of the electrical impact screwdriver when assembling fixed threaded joints. By varying the set speed of the rotor head and working time of the impact mechanism, there is an opportunity to determine electrical energy consumption of the tool for the given tightening moment. The results of the experiment show that at the same tightening moment obtained the electrical energy consumption of the impact screwdriver is less at a higher starting set speed of the rotor head but shorter operating time of the impact mechanism than at a lower speed of the rotor head and longer operating time of the impact mechanism.

Energy consumption analysis of constant voltage and constant current operations in capacitive deionization

DOE PAGES

Qu, Yatian; Campbell, Patrick G.; Gu, Lei; ...

2016-09-21

Here we report our studies to compare energy consumption of a CDI cell in constant voltage (CV) and constant current (CC) operations, with a focus on understanding the underlying physics of consumption patterns. The comparison is conducted under conditions that the CV and CC operations result in the same amounts of input charge and within identical charging phase durations. We present two electrical circuit models to simulate energy consumption in charging phase: one is a simple RC circuit model, and the other a transmission line circuit model. We built and tested a CDI cell to validate the transmission line model,more » and performed a series of experiments to compare CV versus CC operation under the condition of equal applied charge and charging duration. The experiments show that CC mode consumes energy at 33.8 kJ per mole of ions removed, which is only 28% of CV mode energy consumption (120.6 kJ/mol), but achieves similar level of salt removals. Lastly, together, the models and experiment support our major conclusion that CC is more energy efficient than CV for equal charge and charging duration. The models also suggest that the lower energy consumption of CC in charging is due to its lower resistive dissipation.« less

Effect of Groove Surface Texture on Tribological Characteristics and Energy Consumption under High Temperature Friction.

PubMed

Wu, Wei; Chen, Guiming; Fan, Boxuan; Liu, Jianyou

2016-01-01

Energy consumption and tribological properties could be improved by proper design of surface texture in friction. However, some literature focused on investigating their performance under high temperature. In the study, different groove surface textures were fabricated on steels by a laser machine, and their tribological behaviors were experimentally studied with the employment of the friction and wear tester under distinct high temperature and other working conditions. The friction coefficient was recorded, and wear performance were characterized by double light interference microscope, scanning electron microscope (SEM) and x-ray energy dispersive spectrometry (EDS). Then, the performances of energy consumptions were carefully estimated. Results showed that friction coefficient, wear, and energy consumption could almost all be reduced by most textures under high temperature conditions, but to a different extent which depends on the experimental conditions and texture parameters. The main improvement mechanisms were analyzed, such as the hardness change, wear debris storage, thermal stress release and friction induced temperature reduction by the textures. Finally, a scattergram of the relatively reduced ratio of the energy consumption was drawn for different surface textures under four distinctive experimental conditions to illustrate the comprehensive energy consumption improving ability of textures, which was of benefit for the application of texture design.

Energy consumption analysis of constant voltage and constant current operations in capacitive deionization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qu, Yatian; Campbell, Patrick G.; Gu, Lei

Here we report our studies to compare energy consumption of a CDI cell in constant voltage (CV) and constant current (CC) operations, with a focus on understanding the underlying physics of consumption patterns. The comparison is conducted under conditions that the CV and CC operations result in the same amounts of input charge and within identical charging phase durations. We present two electrical circuit models to simulate energy consumption in charging phase: one is a simple RC circuit model, and the other a transmission line circuit model. We built and tested a CDI cell to validate the transmission line model,more » and performed a series of experiments to compare CV versus CC operation under the condition of equal applied charge and charging duration. The experiments show that CC mode consumes energy at 33.8 kJ per mole of ions removed, which is only 28% of CV mode energy consumption (120.6 kJ/mol), but achieves similar level of salt removals. Lastly, together, the models and experiment support our major conclusion that CC is more energy efficient than CV for equal charge and charging duration. The models also suggest that the lower energy consumption of CC in charging is due to its lower resistive dissipation.« less

Effect of Groove Surface Texture on Tribological Characteristics and Energy Consumption under High Temperature Friction

PubMed Central

Wu, Wei; Chen, Guiming; Fan, Boxuan; Liu, Jianyou

2016-01-01

Energy consumption and tribological properties could be improved by proper design of surface texture in friction. However, some literature focused on investigating their performance under high temperature. In the study, different groove surface textures were fabricated on steels by a laser machine, and their tribological behaviors were experimentally studied with the employment of the friction and wear tester under distinct high temperature and other working conditions. The friction coefficient was recorded, and wear performance were characterized by double light interference microscope, scanning electron microscope (SEM) and x-ray energy dispersive spectrometry (EDS). Then, the performances of energy consumptions were carefully estimated. Results showed that friction coefficient, wear, and energy consumption could almost all be reduced by most textures under high temperature conditions, but to a different extent which depends on the experimental conditions and texture parameters. The main improvement mechanisms were analyzed, such as the hardness change, wear debris storage, thermal stress release and friction induced temperature reduction by the textures. Finally, a scattergram of the relatively reduced ratio of the energy consumption was drawn for different surface textures under four distinctive experimental conditions to illustrate the comprehensive energy consumption improving ability of textures, which was of benefit for the application of texture design. PMID:27035658

Low Calorie Beverage Consumption Is Associated with Energy and Nutrient Intakes and Diet Quality in British Adults

PubMed Central

Gibson, Sigrid A.; Horgan, Graham W.; Francis, Lucy E.; Gibson, Amelia A.; Stephen, Alison M.

2016-01-01

It is unclear whether consumption of low-calorie beverages (LCB) leads to compensatory consumption of sweet foods, thus reducing benefits for weight control or diet quality. This analysis investigated associations between beverage consumption and energy intake and diet quality of adults in the UK National Diet and Nutrition Survey (NDNS) (2008–2011; n = 1590), classified into: (a) non-consumers of soft drinks (NC); (b) LCB consumers; (c) sugar-sweetened beverage (SSB) consumers; or (d) consumers of both beverages (BB), based on 4-day dietary records. Within-person data on beverage consumption on different days assessed the impact on energy intake. LCB consumers and NC consumed less energy and non-milk extrinsic sugars than other groups. Micronutrient intakes and food choices suggested higher dietary quality in NC/LCB consumers compared with SSB/BB consumers. Within individuals on different days, consumption of SSB, milk, juice, and alcohol were all associated with increased energy intake, while LCB and tea, coffee or water were associated with no change; or reduced energy intake when substituted for caloric beverages. Results indicate that NC and LCB consumers tend to have higher quality diets compared with SSB or BB consumers and do not compensate for sugar or energy deficits by consuming more sugary foods. PMID:26729159

Low Calorie Beverage Consumption Is Associated with Energy and Nutrient Intakes and Diet Quality in British Adults.

PubMed

Gibson, Sigrid A; Horgan, Graham W; Francis, Lucy E; Gibson, Amelia A; Stephen, Alison M

2016-01-02

It is unclear whether consumption of low-calorie beverages (LCB) leads to compensatory consumption of sweet foods, thus reducing benefits for weight control or diet quality. This analysis investigated associations between beverage consumption and energy intake and diet quality of adults in the UK National Diet and Nutrition Survey (NDNS) (2008-2011; n = 1590), classified into: (a) non-consumers of soft drinks (NC); (b) LCB consumers; (c) sugar-sweetened beverage (SSB) consumers; or (d) consumers of both beverages (BB), based on 4-day dietary records. Within-person data on beverage consumption on different days assessed the impact on energy intake. LCB consumers and NC consumed less energy and non-milk extrinsic sugars than other groups. Micronutrient intakes and food choices suggested higher dietary quality in NC/LCB consumers compared with SSB/BB consumers. Within individuals on different days, consumption of SSB, milk, juice, and alcohol were all associated with increased energy intake, while LCB and tea, coffee or water were associated with no change; or reduced energy intake when substituted for caloric beverages. Results indicate that NC and LCB consumers tend to have higher quality diets compared with SSB or BB consumers and do not compensate for sugar or energy deficits by consuming more sugary foods.

Characterization of Norwegian women eating wholegrain bread.

PubMed

Bakken, Toril; Braaten, Tonje; Olsen, Anja; Lund, Eiliv; Skeie, Guri

2015-10-01

To investigate dietary and non-dietary characteristics of wholegrain bread eaters in the Norwegian Women and Cancer study. Cross-sectional study using an FFQ. Women were divided into two groups according to wholegrain bread consumption. Adult women (n 69 471). Median daily consumption of standardized slices of wholegrain bread was 2·5 in the low intake group and 4·5 in the high intake group. The OR for high wholegrain bread consumption was 0·28, 2·19 and 4·63 for the first, third and fourth quartile of energy intake, respectively, compared with the second quartile. Living outside Oslo or in East Norway and having a high level of physical activity were associated with high wholegrain bread consumption. BMI and smoking were inversely associated with wholegrain bread consumption. Intake of many food items was positively associated with wholegrain bread consumption (P trend <0·01). After adjustment for energy intake, consumption of most food items was inversely associated with wholegrain bread consumption (P trend <0·001). The mean intakes of thiamin and Fe were higher in those with high wholegrain bread consumption, even after taking energy intake into account. Energy intake was strongly positively associated with wholegrain bread consumption. Geographical differences in wholegrain bread consumption were observed. Our study suggests that women with high wholegrain bread consumption do not generally have a healthier diet than those who eat less wholegrain bread, but that they tend to be healthier in regard to other lifestyle factors.

Analysis of Household Electricity Consumption Patterns and Economy of Water Heating Shifting and Saving Bulbs

NASA Astrophysics Data System (ADS)

Rosin, Argo; Moller, Taavi; Lehtla, Madis; Hoimoja, Hardi

2010-01-01

This article analyses household electricity consumption based on an object in Estonia. Energy consumption of workday and holiday by loads (including high and low tariff energy consumption) is discussed. The final part describes the evaluation of profitability of common investments of consumption shifting and replacing inefficient devices with more efficient ones. Additionally it describes shifting problems and shifting equipment profitability in real-time tariff system.

Energy drinks in the Gulf Cooperation Council states: A review.

PubMed

Alhyas, Layla; El Kashef, Ahmed; AlGhaferi, Hamad

2016-01-01

Energy drinks have become a popular beverage worldwide. This review was carried out to have an overview among adolescents and emerging adults in the Gulf Co-operation Council states about energy drinks consumption rates and other related issues such as starting age and patterns of energy drink consumption. The Medline and Embase databases were searched separately using different terms such as energy drinks, energy beverages, and caffeinated drinks. Data related to the rates of energy drinks use were entered in STATA for statistical analysis. Then, these data were used to conduct meta-analysis to estimate the rate of energy drink consumption. Overall, meta-analysis results showed that the estimated rates of energy drinks consumption is 46.9% (95% CIs, 33.2 -66.1; nine studies) with I-square 3.7%. Findings indicated that individuals start to consume energy drinks at approximately 16 years old, and males were found to consume energy drinks more frequently than females. Results from this review carry several recommendations for policy and enforcement, public education and research that can help policy and decision makers to achieve the goal of safer use of energy drinks.

An Assessment of Hydrogen as a Means to Implement the United States Navy’s Renewable Energy Initiative

DTIC Science & Technology

2014-09-01

pH of Household Items and Associated Effect on Fish , after [5] 5 As the world’s average surface temperature increases and continues to negatively... Effect on Fish , after [5] ........... 4  Figure 4.  Historical and Predicted Sea Level Change, after [10] ......................... 6  Figure 5...IPCC states in a 2014 climate change report [4] that, “[t]he global average consumption of fish and other products from fisheries and aquaculture in

Test results of the Chrysler upgraded automotive gas turbine engine: Initial design

NASA Technical Reports Server (NTRS)

Horvath, D.; Ribble, G. H., Jr.; Warren, E. L.; Wood, J. C.

1981-01-01

The upgraded engine as built to the original design was deficient in power and had excessive specific fuel consumption. A high instrumented version of the engine was tested to identify the sources of the engine problems. Analysis of the data shows the major problems to be low compressor and power turbine efficiency and excessive interstage duct losses. In addition, high HC and CO emission were measured at idle, and high NOx emissions at high energy speeds.

Near-term hybrid vehicle program, phase 1

NASA Technical Reports Server (NTRS)

1979-01-01

The preliminary design of a hybrid vehicle which fully meets or exceeds the requirements set forth in the Near Term Hybrid Vehicle Program is documented. Topics addressed include the general layout and styling, the power train specifications with discussion of each major component, vehicle weight and weight breakdown, vehicle performance, measures of energy consumption, and initial cost and ownership cost. Alternative design options considered and their relationship to the design adopted, computer simulation used, and maintenance and reliability considerations are also discussed.

Energy War Is Generating Jobs

ERIC Educational Resources Information Center

Fiester, Kenneth

1977-01-01

Describes various energy-related projects and legislation, with new job estimates, to improve or design buildings and methods to reduce the annual growth in energy consumption by reducing gasoline consumption, cutting oil imports, increasing coal production, insulating buildings, and installing solar energy devices. (MF)

Energy Drink Use Linked to High-sugar Beverage Intake and BMI among Teens.

PubMed

Williams, Ronald D; Housman, Jeff M; Odum, Mary; Rivera, Alissa E

2017-05-01

We assessed the relationship of energy drink, high-sugar, and low-sugar beverage consumption. Mann-Whitney U, Cohen's d and effect sizes were used to examine data from 1737 adolescents in the United States who participated in the 2014 FLASHE Study. Secondary analysis examined consumption of energy drinks, high- and low-sugar beverages, and adolescents' BMIs. Among adolescents, 13.7% (N = 239) reported past 7-day energy drink consumption. Participants who did not consume energy drinks in the past 7 days were more likely to consume low-sugar beverages of water (p < .001) and milk (p = .046). Consumption of energy drinks was positively related to sweetened fruit drinks (p < .001), pure fruit juice (p = .008), soda (p < .001), and sports drinks (p < .001). Energy drink consumers also reported higher mean BMI (p = .004). Adolescents who consume energy drinks during the past 7 days are more likely to also consume other high-sugar beverages. Whereas those who report no past 7-day use of energy drinks consume higher rates of low- or no-sugar beverages. Health education and prevention efforts to reduce adolescent energy drink consumption may lead to reductions in other high-sugar beverage intake and have a positive impact on obesity rates among adolescents.

Energy Use and Power Levels in New Monitors and Personal Computers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberson, Judy A.; Homan, Gregory K.; Mahajan, Akshay

2002-07-23

Our research was conducted in support of the EPA ENERGY STAR Office Equipment program, whose goal is to reduce the amount of electricity consumed by office equipment in the U.S. The most energy-efficient models in each office equipment category are eligible for the ENERGY STAR label, which consumers can use to identify and select efficient products. As the efficiency of each category improves over time, the ENERGY STAR criteria need to be revised accordingly. The purpose of this study was to provide reliable data on the energy consumption of the newest personal computers and monitors that the EPA can usemore » to evaluate revisions to current ENERGY STAR criteria as well as to improve the accuracy of ENERGY STAR program savings estimates. We report the results of measuring the power consumption and power management capabilities of a sample of new monitors and computers. These results will be used to improve estimates of program energy savings and carbon emission reductions, and to inform rev isions of the ENERGY STAR criteria for these products. Our sample consists of 35 monitors and 26 computers manufactured between July 2000 and October 2001; it includes cathode ray tube (CRT) and liquid crystal display (LCD) monitors, Macintosh and Intel-architecture computers, desktop and laptop computers, and integrated computer systems, in which power consumption of the computer and monitor cannot be measured separately. For each machine we measured power consumption when off, on, and in each low-power level. We identify trends in and opportunities to reduce power consumption in new personal computers and monitors. Our results include a trend among monitor manufacturers to provide a single very low low-power level, well below the current ENERGY STAR criteria for sleep power consumption. These very low sleep power results mean that energy consumed when monitors are off or in active use has become more important in terms of contribution to the overall unit energy consumption (UEC). Cur rent ENERGY STAR monitor and computer criteria do not specify off or on power, but our results suggest opportunities for saving energy in these modes. Also, significant differences between CRT and LCD technology, and between field-measured and manufacturer-reported power levels reveal the need for standard methods and metrics for measuring and comparing monitor power consumption.« less

Short-Term Energy Outlook Model Documentation: Motor Gasoline Consumption Model

EIA Publications

2011-01-01

The motor gasoline consumption module of the Short-Term Energy Outlook (STEO) model is designed to provide forecasts of total U.S. consumption of motor gasolien based on estimates of vehicle miles traveled and average vehicle fuel economy.

Major food sources contributing to energy intake--a nationwide survey of Brazilians aged 10 years and older.

PubMed

Sichieri, Rosely; Bezerra, Ilana Nogueira; Araújo, Marina Campos; de Moura Souza, Amanda; Yokoo, Edna Massae; Pereira, Rosangela Alves

2015-05-28

Identification of major sources of energy in the diet helps to implement dietary recommendations to reduce obesity. To determine the food sources of energy consumed by Brazilians, we used the traditional method of ranking energy contribution of selected food groups and also compared days with and without consumption of specific food groups. Analysis was based on two non-consecutive days of dietary record from the Brazilian National Dietary Survey, conducted among 34,003 Brazilians (aged 10 years or more), taking into account the complex design of the survey. Comparison of days with and without consumption gave more consistent results, with sweets and cookies as the most important contributors to energy intake, increasing 992 kJ/d (95% CI 883, 1096) for those days when consumption of cakes, cookies and desserts was reported compared to days without their consumption. Savoury snacks, cheese and sugar-sweetened beverages (SSB) also increase energy intake by about 600 kJ. The only group associated with decreased energy intake was vegetable (-155 kJ; 95% CI -272, -37). Consumption of beans, milk and fruits increased the energy intake by about 210 kJ. In total, the mean energy intake of the group was 8000 kJ. Except for the consumption of vegetables, all of the other ten food groups analysed were associated with increased energy intake. Sweets and cookies may increase the energy intake by 12% and SSB by 7%, indicating that these two groups are major targets for improving healthy eating by reducing energy intake; whereas vegetable intake is associated with the reduction of energy content of the diet.

Experimental verification of an energy consumption signal tool for operational decision support in an office building

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pavlak, Gregory S.; Henze, Gregor P.; Hirsch, Adam I.

This paper demonstrates an energy signal tool to assess the system-level and whole-building energy use of an office building in downtown Denver, Colorado. The energy signal tool uses a traffic light visualization to alert a building operator to energy use which is substantially different from expected. The tool selects which light to display for a given energy end-use by comparing measured energy use to expected energy use, accounting for uncertainty. A red light is only displayed when a fault is likely enough, and abnormal operation costly enough, that taking action will yield the lowest cost result. While the theoretical advancesmore » and tool development were reported previously, it has only been tested using a basic building model and has not, until now, been experimentally verified. Expected energy use for the field demonstration is provided by a compact reduced-order representation of the Alliance Center, generated from a detailed DOE-2.2 energy model. Actual building energy consumption data is taken from the summer of 2014 for the office building immediately after a significant renovation project. The purpose of this paper is to demonstrate a first look at the building following its major renovation compared to the design intent. The tool indicated strong under-consumption in lighting and plug loads and strong over-consumption in HVAC energy consumption, which prompted several focused actions for follow-up investigation. In addition, this paper illustrates the application of Bayesian inference to the estimation of posterior parameter probability distributions to measured data. Practical discussion of the application is provided, along with additional findings from further investigating the significant difference between expected and actual energy consumption.« less

Water Use in the United States Energy System: A National Assessment and Unit Process Inventory of Water Consumption and Withdrawals.

PubMed

Grubert, Emily; Sanders, Kelly T

2018-06-05

The United States (US) energy system is a large water user, but the nature of that use is poorly understood. To support resource comanagement and fill this noted gap in the literature, this work presents detailed estimates for US-based water consumption and withdrawals for the US energy system as of 2014, including both intensity values and the first known estimate of total water consumption and withdrawal by the US energy system. We address 126 unit processes, many of which are new additions to the literature, differentiated among 17 fuel cycles, five life cycle stages, three water source categories, and four levels of water quality. Overall coverage is about 99% of commercially traded US primary energy consumption with detailed energy flows by unit process. Energy-related water consumption, or water removed from its source and not directly returned, accounts for about 10% of both total and freshwater US water consumption. Major consumers include biofuels (via irrigation), oil (via deep well injection, usually of nonfreshwater), and hydropower (via evaporation and seepage). The US energy system also accounts for about 40% of both total and freshwater US water withdrawals, i.e., water removed from its source regardless of fate. About 70% of withdrawals are associated with the once-through cooling systems of approximately 300 steam cycle power plants that produce about 25% of US electricity.

Electrode contact configuration and energy consumption in spinal cord stimulation.

PubMed

de Vos, Cecile C; Hilgerink, Marjolein P; Buschman, Hendrik P J; Holsheimer, Jan

2009-12-01

To test the hypothesis that in spinal cord stimulation, an increase in the number of cathodes increases the energy per pulse, contrary to an increase in the number of anodes, which decreases energy consumption per pulse. Patients with an Itrel III (7425; Medtronic, Inc., Minneapolis, MN) implantable pulse generator and a Pisces-Quad (3487A; Medtronic, Inc.) implantable quadripolar lead were selected for this study. A set of 7 standard contact configurations was used for each patient. Resistor network models mimicking these configurations were constructed. The University of Twente's Spinal Cord Stimulation software was used to simulate the effect of these contact configurations on large spinal nerve fibers. To allow a comparison of the measured and modeled energy per pulse, all values were normalized. Both the empirical and the modeling results showed an increase in energy consumption with an increasing number of cathodes. Although the patient data with 1 and 2 cathodes did not differ significantly, energy consumption was significantly higher when 3 cathodes were used instead of 1 or 2 cathodes. The average energy consumption was significantly higher when bipolar stimulation was used instead of monopolar cathodal stimulation. An increasing number of anodes caused a decrease in energy consumption. When the paresthesia area can be covered with several configurations, it will be beneficial for the patient to program a configuration with 1 cathode and either no or multiple anodes.

Energy drink consumption is associated with anxiety in Australian young adult males.

PubMed

Trapp, Georgina S A; Allen, Karina; O'Sullivan, Therese A; Robinson, Monique; Jacoby, Peter; Oddy, Wendy H

2014-05-01

Energy drinks are predominantly targeted to young adult consumers; however, there has been limited research into their effects on psychological functioning in this demographic group. This study examined cross-sectional associations between energy drink consumption and mental health in a population-based sample of young adults participating in the Western Australian Pregnancy Cohort (Raine) Study. We used self-report questionnaires to assess energy drink consumption and mental health (Depression Anxiety Stress Scale-21; DASS-21) at the 20-year cohort follow-up. In the regression analyses, we considered associations between energy drink consumption (mL/day) and continuous DASS-21 scores, adjusting for sociodemographic variables, alcohol and drug use, physical activity, body mass index (BMI), and dietary intake. Our sample included 502 males and 567 females (mean age 20 ± 3 years). After adjusting for potential confounding factors and controlling for coexisting mental health problems, energy drink consumption (per 100 mL/day) was significantly associated with anxiety (but not depression or stress), and this relationship was found only in males (β = 0.32; 95% CI = 0.05, 0.58). Our study found that energy drink consumption was associated with increased anxiety in young adult males. Further research into the possible contribution of energy drink use to the development of mental health problems in young adults is needed. © 2013 Wiley Periodicals, Inc.

An empirical analysis of financial development and energy demand: establishing the role of globalization.

PubMed

Saud, Shah; Danish; Chen, Songsheng

2018-06-14

The rapid mode of globalization is experienced in the last few years. The acceleration in globalization expands economic activities through a share of knowledge and transfer of technology which influence energy demand. So, the objective of this empirical work is to explore the impact of financial development on energy demand incorporating globalization. The empirical finding is based on autoregressive distributed lag (ARDL) bound testing approach from 1980 to 2016 in case of China. Overall, we infer that financial development increases energy demand in China. Furthermore, the finding shows that globalization has a negative and significant impact on energy demand. The additional determinants, such as economic growth, and urbanization stimulate energy consumption. Besides, energy consumption granger cause financial development in the long-run path. Similarly, unidirectional causality is detected between globalization and energy consumption. The result gives direction to policymakers to preserve as well as to enhance efficient energy consumption and sustain economic growth in China with acceleration in globalization.