Application of modern tensor calculus to engineered domain structures. 1. Calculation of tensorial covariants.

PubMed

Kopský, Vojtech

2006-03-01

This article is a roadmap to a systematic calculation and tabulation of tensorial covariants for the point groups of material physics. The following are the essential steps in the described approach to tensor calculus. (i) An exact specification of the considered point groups by their embellished Hermann-Mauguin and Schoenflies symbols. (ii) Introduction of oriented Laue classes of magnetic point groups. (iii) An exact specification of matrix ireps (irreducible representations). (iv) Introduction of so-called typical (standard) bases and variables -- typical invariants, relative invariants or components of the typical covariants. (v) Introduction of Clebsch-Gordan products of the typical variables. (vi) Calculation of tensorial covariants of ascending ranks with consecutive use of tables of Clebsch-Gordan products. (vii) Opechowski's magic relations between tensorial decompositions. These steps are illustrated for groups of the tetragonal oriented Laue class D(4z) -- 4(z)2(x)2(xy) of magnetic point groups and for tensors up to fourth rank.

Attracting Students to Fluid Mechanics with Coffee

NASA Astrophysics Data System (ADS)

Ristenpart, William

2016-11-01

We describe a new class developed at U.C. Davis titled "The Design of Coffee," which serves as a nonmathematical introduction to chemical engineering as illustrated by the process of roasting and brewing coffee. Hands-on coffee experiments demonstrate key engineering principles, including material balances, chemical kinetics, mass transfer, conservation of energy, and fluid mechanics. The experiments lead to an engineering design competition where students strive to make the best tasting coffee using the least amount of energy - a classic engineering optimization problem, but one that is both fun and tasty. "The Design of Coffee" started as a freshmen seminar in 2013, and it has exploded in popularity: it now serves 1,533 students per year, and is the largest and most popular elective course at U.C. Davis. In this talk we focus on the class pedagogy as applied to fluid mechanics, with an emphasis on how coffee serves as an engaging and exciting topic for teaching students about fluid mechanics in an approachable, hands-on manner.

Transforming an Introductory Programming Course: From Lectures to Active Learning via Wireless Laptops

ERIC Educational Resources Information Center

Barak, Miri; Harward, Judson; Kocur, George; Lerman, Steven

2007-01-01

Within the framework of MIT's course 1.00: Introduction to Computers and Engineering Problem Solving, this paper describes an innovative project entitled: "Studio 1.00" that integrates lectures with in-class demonstrations, active learning sessions, and on-task feedback, through the use of wireless laptop computers. This paper also describes a…

Astronautics Degrees for Space Industry

NASA Astrophysics Data System (ADS)

Gruntman, M.; Brodsky, R.; Erwin, D.; Kunc, J.

The Astronautics Program (http://astronautics.usc.edu) of the University of Southern California (USC) offers a full set of undergraduate and graduate degree programs in Aerospace Engineering with emphasis in Astronautics. The Bachelor of Science degree program in Astronautics combines basic science and engineering classes with specialized astronautics classes. The Master of Science degree program in Astronautics offers classes in various areas of space technology. The Certificate in Astronautics targets practicing engineers and scientists who enter space-related fields and/or who want to obtain training in specific space-related areas. Many specialized graduate classes are taught by adjunct faculty working at the leading space companies. The Master of Science degree and Certificate are available through the USC Distance Education Network (DEN). Today, the Internet allows us to reach students anywhere in the world through webcasting. The majority of our graduate students, as well as those pursuing the Certificate, work full time as engineers in the space industry and government research and development centers. The new world of distance learning presents new challenges and opens new opportunities. We show how the transformation of distance learning and particularly the introduction of webcasting transform organization of the program and class delivery. We will describe in detail the academic focus of the program, student reach, and structure of program components. Program development is illustrated by the student enrollment dynamics and related industrial trends; the lessons learned emphasize the importance of feedback from the students and from the space industry.

Astronautics degrees for the space industry

NASA Astrophysics Data System (ADS)

Gruntman, M.; Brodsky, R. F.; Erwin, D. A.; Kunc, J. A.

2004-01-01

The Astronautics Program (http://astronautics.usc.edu) of the University of Southern California (USC) offers a full set of undergraduate and graduate degree programs in Aerospace Engineering with emphasis in Astronautics. The Bachelor of Science and Master of Science degree programs in Astronautics combine basic science and engineering classes with specialized classes in space technology. The Certificate in Astronautics targets practicing engineers and scientists who enter space-related fields and/or who want to obtain training in specific space-related areas. Many specialized graduate classes are taught by adjunct faculty working at the leading space companies. The Master of Science degree and Certificate are available entirely through the USC Distance Education Network (DEN). Today, the Internet allows us to reach students anywhere in the world through webcasting. The majority of our graduate students, as well as those pursuing the Certificate, work full time as engineers in the space industry and government research and development centers while earning their degrees. The new world of distance learning presents new challenges and opens new opportunities. Distance learning, and particularly the introduction of webcasting, transform the organization of the graduate program and class delivery. We describe in detail the program's academic focus, student reach, and structure of program components. Program development is illustrated by the student enrollment dynamics and related industrial trends; the lessons learned emphasize the importance of feedback from the students and from the space industry.

CFD Analysis of a Penta-hulled, Air-Entrapment, High-Speed Planning Vessel

DTIC Science & Technology

2008-03-01

INTRODUCTION A. BACKGROUND The 2007 Total Ship Systems Engineering (TSSE) class was tasked with designing a new riverine craft or specialized...the concept of operations, for our defined system architecture (combined Specialized Command and Control Craft / Mobile Operating Base). This also...of an integration process that requires both systems and equipment optimization while meeting predetermined requirements set for by the Concept of

A High School Level Course On Robot Design And Construction

NASA Astrophysics Data System (ADS)

Sadler, Paul M.; Crandall, Jack L.

1984-02-01

The Robotics Design and Construction Class at Sehome High School was developed to offer gifted and/or highly motivated students an in-depth introduction to a modern engineering topic. The course includes instruction in basic electronics, digital and radio electronics, construction skills, robotics literacy, construction of the HERO 1 Heathkit Robot, computer/ robot programming, and voice synthesis. A key element which leads to the success of the course is the involvement of various community assets including manpower and financial assistance. The instructors included a physics/electronics teacher, a computer science teacher, two retired engineers, and an electronics technician.

Recent advances in electrospun nanofibers for wound healing.

PubMed

Chen, Shixuan; Liu, Bing; Carlson, Mark A; Gombart, Adrian F; Reilly, Debra A; Xie, Jingwei

2017-06-01

Electrospun nanofibers represent a novel class of materials that show great potential in many biomedical applications including biosensing, regenerative medicine, tissue engineering, drug delivery and wound healing. In this work, we review recent advances in electrospun nanofibers for wound healing. This article begins with a brief introduction on the wound, and then discusses the unique features of electrospun nanofibers critical for wound healing. It further highlights recent studies that have used electrospun nanofibers for wound healing applications and devices, including sutures, multifunctional dressings, dermal substitutes, engineered epidermis and full-thickness skin regeneration. Finally, we finish with conclusions and future perspective in this field.

Application of NX Siemens PLM software in educational process in preparing students of engineering branch

NASA Astrophysics Data System (ADS)

Sadchikova, G. M.

2017-01-01

This article discusses the results of the introduction of computer-aided design NX by Siemens Plm Software to the classes of a higher education institution. The necessity of application of modern information technologies in teaching students of engineering profile and selection of a software product is substantiated. The author describes stages of the software module study in relation to some specific courses, considers the features of NX software, which require the creation of standard and unified product databases. The article also gives examples of research carried out by the students with the various software modules.

Redox cofactor engineering in industrial microorganisms: strategies, recent applications and future directions.

PubMed

Liu, Jiaheng; Li, Huiling; Zhao, Guangrong; Caiyin, Qinggele; Qiao, Jianjun

2018-05-01

NAD and NADP, a pivotal class of cofactors, which function as essential electron donors or acceptors in all biological organisms, drive considerable catabolic and anabolic reactions. Furthermore, they play critical roles in maintaining intracellular redox homeostasis. However, many metabolic engineering efforts in industrial microorganisms towards modification or introduction of metabolic pathways, especially those involving consumption, generation or transformation of NAD/NADP, often induce fluctuations in redox state, which dramatically impede cellular metabolism, resulting in decreased growth performance and biosynthetic capacity. Here, we comprehensively review the cofactor engineering strategies for solving the problematic redox imbalance in metabolism modification, as well as their features, suitabilities and recent applications. Some representative examples of in vitro biocatalysis are also described. In addition, we briefly discuss how tools and methods from the field of synthetic biology can be applied for cofactor engineering. Finally, future directions and challenges for development of cofactor redox engineering are presented.

HydroViz: A web-based hydrologic observatory for enhancing hydrology and earth-science education

NASA Astrophysics Data System (ADS)

Habib, E. H.; Ma, Y.; Williams, D.

2010-12-01

The main goal of this study is to develop a virtual hydrologic observatory (HydroViz) that integrates hydrologic field observations with numerical simulations by taking advantage of advances in hydrologic field & remote sensing data, computer modeling, scientific visualization, and web resources and internet accessibility. The HydroViz system is a web-based teaching tool that can run on any web browsers. It leverages the strength of Google Earth to provide authentic and hands-on activities to improve learning. Evaluation of the HydroViz was performed in three engineering courses (a senior level course and two Introductory courses at two different universities). Evaluation results indicate that HydroViz provides an improvement over existing engineering hydrology curriculum. HydroViz was effective in facilitating students’ learning and understanding of hydrologic concepts & increasing related skills. HydroViz was much more effective for students in engineering hydrology classes rather than at the freshmen introduction to civil engineering class. We found that HydroViz has great potential for freshmen audience. Even though HydroViz was challenging to some freshmen, most of them still learned the key concepts and the tool increased the enthusiasm for half of the freshmen. The evaluation provided suggestions to create a simplified version of HydroViz for freshmen-level courses students. It identified concepts and tasks that might be too challenging or irrelevant to the freshmen and areas where we could provide more guidance in the tool. After the first round of evaluation, the development team has made significant improvements to HydroViz, which would further improve its effectiveness for next round of class applications which is planned for the Fall of 2010 to take place in 5 classes at 4 different institutions.

Trainer Engineering Report (Final) for MILES. Volume 2. Revision

DTIC Science & Technology

1981-04-22

formerly a separate document, Data Item AOOX. iii/iv 1A , SECURITY CLASSIFICATION OF THIS PAGE (Uhen Deaa Enterecd) ... __ . ....... REPORT DOCUMENTATION...NAVTRAEQUIPCEN, Orlando, FL 32813 3 14. MON’TORING AGENCY NAME & ADDRESS(II dilletent from CoftrollIn OGlue*) IS. SECURITY CLASS. (of thie twoot...OBSOLETE UNCLASSIFIED S/N 0102蓞-6601 I SECURITY CL.ASSIFICATION OF THIS iPAGE fUlses Data EaieteE i • CONTENTS .I * INTRODUCTION 1-1 1.1 1980 MILES 1-1

Tolerance to MHC class II disparate allografts through genetic modification of bone marrow

PubMed Central

Jindra, Peter T.; Tripathi, Sudipta; Tian, Chaorui; Iacomini, John; Bagley, Jessamyn

2012-01-01

Induction of molecular chimerism through genetic modification of bone marrow is a powerful tool for the induction of tolerance. Here we demonstrate for the first time that expression of an allogeneic MHC class II gene in autologous bone marrow cells, resulting in a state of molecular chimerism, induces tolerance to MHC class II mismatched skin grafts, a stringent test of transplant tolerance. Reconstitution of recipients with syngeneic bone marrow transduced with retrovirus encoding H-2I-Ab (I-Ab) resulted the long-term expression of the retroviral gene product on the surface of MHC class II-expressing bone marrow derived cell types. Mechanistically, tolerance was maintained by the presence of regulatory T cells, which prevented proliferation and cytokine production by alloreactive host T cells. Thus, the introduction of MHC class II genes into bone marrow derived cells through genetic engineering results in tolerance. These results have the potential to extend the clinical applicability of molecular chimerism for tolerance induction. PMID:22833118

Characterization and evaluation of graphene oxide scaffold for periodontal wound healing of class II furcation defects in dog

PubMed Central

Kawamoto, Kohei; Miyaji, Hirofumi; Nishida, Erika; Miyata, Saori; Kato, Akihito; Tateyama, Akito; Furihata, Tomokazu; Shitomi, Kanako; Iwanaga, Toshihiko; Sugaya, Tsutomu

2018-01-01

Introduction The 3-dimensional scaffold plays a key role in volume and quality of repair tissue in periodontal tissue engineering therapy. We fabricated a novel 3D collagen scaffold containing carbon-based 2-dimensional layered material, named graphene oxide (GO). The aim of this study was to characterize and assess GO scaffold for periodontal tissue healing of class II furcation defects in dog. Materials and methods GO scaffolds were prepared by coating the surface of a 3D collagen sponge scaffold with GO dispersion. Scaffolds were characterized using cytotoxicity and tissue reactivity tests. In addition, GO scaffold was implanted into dog class II furcation defects and periodontal healing was investigated at 4 weeks postsurgery. Results GO scaffold exhibited low cytotoxicity and enhanced cellular ingrowth behavior and rat bone forming ability. In addition, GO scaffold stimulated healing of dog class II furcation defects. Periodontal attachment formation, including alveolar bone, periodontal ligament-like tissue, and cementum-like tissue, was significantly increased by GO scaffold implantation, compared with untreated scaffold. Conclusion The results suggest that GO scaffold is biocompatible and possesses excellent bone and periodontal tissue formation ability. Therefore, GO scaffold would be beneficial for periodontal tissue engineering therapy. PMID:29713167

Fundamentals of Cryogenics

NASA Technical Reports Server (NTRS)

Johnson, Wesley; Tomsik, Thomas; Moder, Jeff

2014-01-01

Analysis of the extreme conditions that are encountered in cryogenic systems requires the most effort out of analysts and engineers. Due to the costs and complexity associated with the extremely cold temperatures involved, testing is sometimes minimized and extra analysis is often relied upon. This short course is designed as an introduction to cryogenic engineering and analysis, and it is intended to introduce the basic concepts related to cryogenic analysis and testing as well as help the analyst understand the impacts of various requests on a test facility. Discussion will revolve around operational functions often found in cryogenic systems, hardware for both tests and facilities, and what design or modelling tools are available for performing the analysis. Emphasis will be placed on what scenarios to use what hardware or the analysis tools to get the desired results. The class will provide a review of first principles, engineering practices, and those relations directly applicable to this subject including such topics as cryogenic fluids, thermodynamics and heat transfer, material properties at low temperature, insulation, cryogenic equipment, instrumentation, refrigeration, testing of cryogenic systems, cryogenics safety and typical thermal and fluid analysis used by the engineer. The class will provide references for further learning on various topics in cryogenics for those who want to dive deeper into the subject or have encountered specific problems.

Band engineering and precipitation enhance thermoelectric performance of SnTe with Zn-doping

NASA Astrophysics Data System (ADS)

Chen, Zhiyu; Wang, Ruifeng; Wang, Guoyu; Zhou, Xiaoyuan; Wang, Zhengshang; Yin, Cong; Hu, Qing; Zhou, Binqiang; Tang, Jun; Ang, Ran

2018-04-01

Not Available Project supported by the National Natural Science Foundation of China (Grant No. 51771126), the Youth Foundation of Science & Technology Department of Sichuan Province, China (Grant No. 2016JQ0051), the Sichuan University Talent Introduction Research Funding (Grand No. YJ201537), the Sichuan University Outstanding Young Scholars Research Funding (Grant No. 2015SCU04A20), the World First-Class University Construction Funding, and the Fundamental and Frontier Research in Chongqing (Grant No. CSTC2015JCYJBX0026).

Shedding light on the subject: introduction to illumination engineering and design for multidiscipline engineering students

NASA Astrophysics Data System (ADS)

Ronen, Ram S.; Smith, R. Frank

1995-10-01

Educating engineers and architects in Illumination Engineering and related subjects has become a very important field and a very satisfying and rewarding one. Main reasons include the need to significantly conserve lighting energy and meet government regulations while supplying appropriate light levels and achieving aesthetical requirements. The proliferation of new lamps, luminaries and lighting controllers many of which are 'energy savers' also helps a trend to seek help from lighting engineers when designing new commercial and residential buildings. That trend is believed to continue and grow as benefits become attractive and new government conservation regulations take affect. To make things even better one notices that Engineering and Science students in most disciplines make excellent candidates for Illumination Engineers because of their background and teaching them can move ahead at a brisk pace and be a rewarding experience nevertheless. In the past two years, Cal Poly Pomona College of Engineering has been the beneficiary of a DOE/California grant. Its purpose was to precipitate and oversee light curricula in various California community colleges and also develop and launch an Illumination Engineering minor at Cal Poly University. Both objectives have successfully been met. Numerous community colleges throughout California developed and are offering a sequence of six lighting courses leading to a certificate; the first graduating class is now coming out of both Cypress and Consumnes Community Colleges. At Cal Poly University a four course/laboratory sequence leading to a minor in Illumination Engineering (ILE) is now offered to upper division students in the College of Engineering, College of Science and College of Architecture and Design. The ILE sequence will briefly be described. The first course, Introduction to Illumination Engineering and its laboratory are described in more detail alter. Various methods of instruction including lectures, self work, industrial visits and guest lectures, as well as the accompanying laboratory work are discussed. Feedback from the students was very positive.

The Transport of Mass, Energy, and Entropy in Cryogenic Support Struts for Engineering Design

NASA Technical Reports Server (NTRS)

Elchert, J. P.

2012-01-01

Engineers working to understand and reduce cryogenic boil-off must solve a variety of transport problems. An important class of nonlinear problems involves the thermal and mechanical design of cryogenic struts. These classic problems are scattered about the literature and typically require too many resources to obtain. So, to save time for practicing engineers, the author presents this essay. Herein, a variety of new, old, and revisited analytical and finite difference solutions of the thermal problem are covered in this essay, along with commentary on approach and assumptions. This includes a few thermal radiation and conduction combined mode solutions with a discussion on insulation, optimum emissivity, and geometrical phenomenon. Solutions to cooling and heat interception problems are also presented, including a discussion of the entropy generation. The literature on the combined mechanical and thermal design of cryogenic support struts is reviewed with an introduction to the associated numerical methods.

The Transport of Mass, Energy, and Entropy in Cryogenic Support Struts for Engineering Design

NASA Technical Reports Server (NTRS)

Elchert, J. P.

2012-01-01

Engineers working to understand and reduce cryogenic boil-off must solve a. variety of transport problems. An important class of nonlinear problems involves the thermal and mechanical design of cryogenic struts. These classic problems are scattered about the literature and typically require too many resources to obtain. So, to save time for practicing engineers, the author presents this essay. Herein, a variety of new, old, and revisited analytical and finite difference solutions of the thermal problem are covered in this essay, along with commentary on approach and assumptions, This includes a few thermal radiation and conduction combined mode solution with a discussion on insulation, optimum emissivity, and geometrical phenomenon. Solutions to cooling and heat interception problems are also presented, including a discussion of the entropy generation. And the literature on the combined mechanical and thermal design of cryogenic support struts is reviewed with an introduction to the associated numerical methods.

Control of Suspect/Counterfeit and Defective Items

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheriff, Marnelle L.

2013-09-03

This procedure implements portions of the requirements of MSC-MP-599, Quality Assurance Program Description. It establishes the Mission Support Alliance (MSA) practices for minimizing the introduction of and identifying, documenting, dispositioning, reporting, controlling, and disposing of suspect/counterfeit and defective items (S/CIs). employees whose work scope relates to Safety Systems (i.e., Safety Class [SC] or Safety Significant [SS] items), non-safety systems and other applications (i.e., General Service [GS]) where engineering has determined that their use could result in a potential safety hazard. MSA implements an effective Quality Assurance (QA) Program providing a comprehensive network of controls and verification providing defense-in-depth by preventingmore » the introduction of S/CIs through the design, procurement, construction, operation, maintenance, and modification of processes. This procedure focuses on those safety systems, and other systems, including critical load paths of lifting equipment, where the introduction of S/CIs would have the greatest potential for creating unsafe conditions.« less

RealSurf - A Tool for the Interactive Visualization of Mathematical Models

NASA Astrophysics Data System (ADS)

Stussak, Christian; Schenzel, Peter

For applications in fine art, architecture and engineering it is often important to visualize and to explore complex mathematical models. In former times there were static models of them collected in museums respectively in mathematical institutes. In order to check their properties for esthetical reasons it could be helpful to explore them interactively in 3D in real time. For the class of implicitly given algebraic surfaces we developed the tool RealSurf. Here we give an introduction to the program and some hints for the design of interesting surfaces.

40 CFR Appendix I to Part 1054 - Summary of Previous Emission Standards

Code of Federal Regulations, 2014 CFR

2014-07-01

... Engines (g/kW-hr) a Engine displacement class HC NOX CO Class III 295 5.36 805 Class IV 241 5.36 805 Class...—Phase 2 Emission Standards for Handheld Engines (g/kW-hr) a Engine displacement class HC+NOX CO Class...-hr) a Engine displacement class HC+NOX CO Class I 16.1 519 Class II 13.4 519 a Phase 1 standards are...

40 CFR Appendix I to Part 1054 - Summary of Previous Emission Standards

Code of Federal Regulations, 2012 CFR

2012-07-01

... Engines (g/kW-hr) a Engine displacement class HC NOX CO Class III 295 5.36 805 Class IV 241 5.36 805 Class...—Phase 2 Emission Standards for Handheld Engines (g/kW-hr) a Engine displacement class HC+NOX CO Class...-hr) a Engine displacement class HC+NOX CO Class I 16.1 519 Class II 13.4 519 a Phase 1 standards are...

40 CFR Appendix I to Part 1054 - Summary of Previous Emission Standards

Code of Federal Regulations, 2013 CFR

2013-07-01

... Engines (g/kW-hr) a Engine displacement class HC NOX CO Class III 295 5.36 805 Class IV 241 5.36 805 Class...—Phase 2 Emission Standards for Handheld Engines (g/kW-hr) a Engine displacement class HC+NOX CO Class...-hr) a Engine displacement class HC+NOX CO Class I 16.1 519 Class II 13.4 519 a Phase 1 standards are...

40 CFR Appendix I to Part 1054 - Summary of Previous Emission Standards

Code of Federal Regulations, 2010 CFR

2010-07-01

... Engines (g/kW-hr) a Engine displacement class HC NOX CO Class III 295 5.36 805 Class IV 241 5.36 805 Class...—Phase 2 Emission Standards for Handheld Engines (g/kW-hr) a Engine displacement class HC+NOX CO Class...-hr) a Engine displacement class HC+NOX CO Class I 16.1 519 Class II 13.4 519 a Phase 1 standards are...

40 CFR Appendix I to Part 1054 - Summary of Previous Emission Standards

Code of Federal Regulations, 2011 CFR

2011-07-01

... Engines (g/kW-hr) a Engine displacement class HC NOX CO Class III 295 5.36 805 Class IV 241 5.36 805 Class...—Phase 2 Emission Standards for Handheld Engines (g/kW-hr) a Engine displacement class HC+NOX CO Class...-hr) a Engine displacement class HC+NOX CO Class I 16.1 519 Class II 13.4 519 a Phase 1 standards are...

Deciphering the Fluorine Code-The Many Hats Fluorine Wears in a Protein Environment.

PubMed

Berger, Allison Ann; Völler, Jan-Stefan; Budisa, Nediljko; Koksch, Beate

2017-09-19

Deciphering the fluorine code is how we describe not only the focus of this Account, but also the systematic approach to studying the impact of fluorine's incorporation on the properties of peptides and proteins used by our groups and others. The introduction of fluorine has been shown to impart favorable, but seldom predictable, properties to peptides and proteins, but up until about two decades ago the outcomes of fluorine modification of peptides and proteins were largely left to chance. Driven by the motivation to extend the application of the unique properties of the element fluorine from medicinal and agro chemistry to peptide and protein engineering we have established extensive research programs that enable the systematic investigation of effects that accompany the introduction of fluorine into this class of biopolymers. The introduction of fluorine into amino acids offers a universe of options for modifications with regard to number and position of fluorine substituents in the amino acid side chain. Moreover, it is important to emphasize that the consequences of incorporating the C-F bond into a biopolymer can be attributed to two distinct yet related phenomena: (i) the fluorine substituent can directly engage in intermolecular interactions with its environment and/or (ii) the other functional groups present in the molecule can be influenced by the electron withdrawing nature of this element (intramolecular) and in turn interact differently with their immediate environment (intermolecular). Based on our studies, we have shown that a change in number and/or position of as subtle as one single fluorine substituent has the power to considerably modify key properties of amino acids such as hydrophobicity, polarity, and secondary structure propensity. These properties are crucial factors in peptide and protein engineering, and thus, fluorinated amino acids can be applied to fine-tune properties such as protein folding, proteolytic stability, and protein-protein interactions provided we understand and become able to predict the outcome of a fluorine substitution in this context. With this Account, we attempt to analyze information we gained from our recent projects on how the nature of the fluorine atom and C-F bond influence four key properties of peptides and proteins: peptide folding, protein-protein interactions, ribosomal translation, and protease stability. These results impressively show why the introduction of fluorine creates a new class of amino acids with a repertoire of functionalities that is unique to the world of proteins and in some cases orthogonal to the set of canonical and natural amino acids. Our concluding statements aim to offer a few conserved design principles that have emerged from systematic studies over the last two decades; in this way, we hope to advance the field of peptide and protein engineering based on the judicious introduction of fluorinated building blocks.

An Introduction to Thermal-Fluid Engineering

NASA Astrophysics Data System (ADS)

Warhaft, Zellman

1998-01-01

This text is the first to provide an integrated introduction to basic engineering topics and the social implications of engineering practice. Aimed at beginning engineering students, the book presents the basic ideas of thermodynamics, fluid mechanics, heat transfer, and combustion through a real-world engineering situation. It relates the engine to the atmosphere in which it moves and exhausts its waste products. The book also discusses the greenhouse effect and atmospheric inversions, and the social implications of engineering in a crowded world with increasing energy demands. Students in mechanical, civil, agricultural, environmental, aerospace, and chemical engineering will welcome this engaging, well-illustrated introduction to thermal-fluid engineering.

Hybrid Turbine Electric Vehicle

NASA Technical Reports Server (NTRS)

Viterna, Larry A.

1997-01-01

Hybrid electric power trains may revolutionize today's ground passenger vehicles by significantly improving fuel economy and decreasing emissions. The NASA Lewis Research Center is working with industry, universities, and Government to develop and demonstrate a hybrid electric vehicle. Our partners include Bowling Green State University, the Cleveland Regional Transit Authority, Lincoln Electric Motor Division, the State of Ohio's Department of Development, and Teledyne Ryan Aeronautical. The vehicle will be a heavy class urban transit bus offering double the fuel economy of today's buses and emissions that are reduced to 1/10th of the Environmental Protection Agency's standards. At the heart of the vehicle's drive train is a natural-gas-fueled engine. Initially, a small automotive engine will be tested as a baseline. This will be followed by the introduction of an advanced gas turbine developed from an aircraft jet engine. The engine turns a high-speed generator, producing electricity. Power from both the generator and an onboard energy storage system is then provided to a variable-speed electric motor attached to the rear drive axle. An intelligent power-control system determines the most efficient operation of the engine and energy storage system.

The academic majors of students taking American soil science classes: 2004-2005 to 2013-2014 academic years

NASA Astrophysics Data System (ADS)

Brevik, Eric C.; Vaughan, Karen L.; Parikh, Sanjai J.; Dolliver, Holly; Lindbo, David; Steffan, Joshua J.; Weindorf, David; McDaniel, Paul; Mbila, Monday; Edinger-Marshall, Susan

2017-04-01

Many papers have been written in recent years discussing the interdisciplinary and transdisciplinary aspects of soil science. Therefore, it would make sense that soil science courses would be taken by students in a wide array of academic majors. To investigate this, we collected data from eight different American universities on the declared academic majors of students enrolled in soil science courses over a 10 year time period (2004-2005 to 2013-2014 academic years). Data was collected for seven different classes taught at the undergraduate level: introduction to soil science, soil fertility, soil management, pedology, soil biology/microbiology, soil chemistry, and soil physics. Overall trends and trends for each class were evaluated. Generally, environmental science and crop science/horticulture/agronomy students were enrolled in soil science courses in the greatest numbers. Environmental science and engineering students showed rapid increases in enrollment over the 10 years of the study, while the number of crop science/ horticulture/ agronomy students declined. In the introduction to soil science classes, environmental science and crop science/ horticulture/ agronomy students were enrolled in the greatest numbers, while declared soil science majors only made up 6.6% of the average enrollment. The highest enrollments in soil fertility were crop science/ horticulture/ agronomy students and other agricultural students (all agricultural majors except crop science, horticulture, agronomy, or soil science). In both the soil management and pedology classes, environmental science and other agricultural students were the largest groups enrolled. Other agricultural students and students from other majors (all majors not otherwise expressly investigated) were the largest enrolled groups in soil biology/microbiology courses, and environmental science and soil science students were the largest enrolled groups in soil chemistry classes. Soil physics was the only class investigated where declared soil science students made up the largest single group of students, with other agricultural students being the second largest group. Results of the study showed that students from many different academic majors take soil science classes at American universities, and the most common majors in these classes depended on the class and the material it addressed.

14 CFR 34.60 - Introduction.

Code of Federal Regulations, 2014 CFR

2014-01-01

... EXHAUST EMISSION REQUIREMENTS FOR TURBINE ENGINE POWERED AIRPLANES Test Procedures for Engine Exhaust Gaseous Emissions (Aircraft and Aircraft Gas Turbine Engines) § 34.60 Introduction. (a) Use the equipment...

40 CFR 90.116 - Certification procedure-determining engine displacement, engine class, and engine families.

Code of Federal Regulations, 2014 CFR

2014-07-01

... engine displacement, engine class, and engine families. 90.116 Section 90.116 Protection of Environment... Certification procedure—determining engine displacement, engine class, and engine families. (a) Engine displacement must be calculated using nominal engine values and rounded to the nearest whole cubic centimeter...

40 CFR 90.116 - Certification procedure-determining engine displacement, engine class, and engine families.

Code of Federal Regulations, 2013 CFR

2013-07-01

... engine displacement, engine class, and engine families. 90.116 Section 90.116 Protection of Environment... Certification procedure—determining engine displacement, engine class, and engine families. (a) Engine displacement must be calculated using nominal engine values and rounded to the nearest whole cubic centimeter...

40 CFR 90.116 - Certification procedure-determining engine displacement, engine class, and engine families.

Code of Federal Regulations, 2012 CFR

2012-07-01

... engine displacement, engine class, and engine families. 90.116 Section 90.116 Protection of Environment... Certification procedure—determining engine displacement, engine class, and engine families. (a) Engine displacement must be calculated using nominal engine values and rounded to the nearest whole cubic centimeter...

40 CFR 90.116 - Certification procedure-determining engine displacement, engine class, and engine families.

Code of Federal Regulations, 2011 CFR

2011-07-01

... engine displacement, engine class, and engine families. 90.116 Section 90.116 Protection of Environment... Certification procedure—determining engine displacement, engine class, and engine families. (a) Engine displacement must be calculated using nominal engine values and rounded to the nearest whole cubic centimeter...

40 CFR 90.116 - Certification procedure-determining engine displacement, engine class, and engine families.

Code of Federal Regulations, 2010 CFR

2010-07-01

... engine displacement, engine class, and engine families. 90.116 Section 90.116 Protection of Environment... Certification procedure—determining engine displacement, engine class, and engine families. (a) Engine displacement must be calculated using nominal engine values and rounded to the nearest whole cubic centimeter...

40 CFR 87.80 - Introduction.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... Test Procedures for Engine Smoke Emissions (Aircraft Gas Turbine Engines) § 87.80 Introduction. Except... determine the conformity of new and in-use gas turbine engines with the applicable standards set forth in...

14 CFR 34.60 - Introduction.

Code of Federal Regulations, 2012 CFR

2012-01-01

... EXHAUST EMISSION REQUIREMENTS FOR TURBINE ENGINE POWERED AIRPLANES Test Procedures for Engine Exhaust Gaseous Emissions (Aircraft and Aircraft Gas Turbine Engines) § 34.60 Introduction. (a) Except as provided... determine the conformity of new aircraft gas turbine engines with the applicable standards set forth in this...

78 FR 13286 - Sharing Certain Business Information Regarding the Introduction of Genetically Engineered...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-27

... Information Regarding the Introduction of Genetically Engineered Organisms With State and Tribal Government... proposing to amend our regulations regarding genetically engineered organisms regulated by the United States...). The regulations refer to such genetically engineered (GE) organisms and products as ``regulated...

14 CFR 34.80 - Introduction.

Code of Federal Regulations, 2012 CFR

2012-01-01

... EXHAUST EMISSION REQUIREMENTS FOR TURBINE ENGINE POWERED AIRPLANES Test Procedures for Engine Smoke Emissions (Aircraft Gas Turbine Engines) § 34.80 Introduction. Except as provided under § 34.5, the... of new and in-use gas turbine engines with the applicable standards set forth in this part. The test...

A case study for integrated STEM outreach in an urban setting using a do-it-yourself vertical jump measurement platform.

PubMed

Drazan, John F; Danielsen, Heather; Vercelletto, Matthew; Loya, Amy; Davis, James; Eglash, Ron

2016-08-01

The purpose of this study was to develop and deploy a low cost vertical jump platform using readily available materials for Science, Technology, Engineering, and Mathematics (STEM) education and outreach in the inner city. The platform was used to measure the jumping ability of participants to introduce students to the collection and analysis of scientific data in an engaging, accessible manner. This system was designed and fabricated by a student team of engineers as part of a socially informed engineering and design class. The vertical jump platform has been utilized in 10 classroom lectures in physics and biology. The system was also used in an after school program in which high school volunteers prepared a basketball based STEM outreach program, and at a community outreach events with over 100 participants. At present, the same group of high school students are now building their own set of vertical jump platform under the mentorship of engineering undergraduates. The construction and usage of the vertical jump platform provides an accessible introduction to the STEM fields within the urban community.

Introduction to current and future protein therapeutics: a protein engineering perspective.

PubMed

Carter, Paul J

2011-05-15

Protein therapeutics and its enabling sister discipline, protein engineering, have emerged since the early 1980s. The first protein therapeutics were recombinant versions of natural proteins. Proteins purposefully modified to increase their clinical potential soon followed with enhancements derived from protein or glycoengineering, Fc fusion or conjugation to polyethylene glycol. Antibody-based drugs subsequently arose as the largest and fastest growing class of protein therapeutics. The rationale for developing better protein therapeutics with enhanced efficacy, greater safety, reduced immunogenicity or improved delivery comes from the convergence of clinical, scientific, technological and commercial drivers that have identified unmet needs and provided strategies to address them. Future protein drugs seem likely to be more extensively engineered to improve their performance, e.g., antibodies and Fc fusion proteins with enhanced effector functions or extended half-life. Two old concepts for improving antibodies, namely antibody-drug conjugates and bispecific antibodies, have advanced to the cusp of clinical success. As for newer protein therapeutic platform technologies, several engineered protein scaffolds are in early clinical development and offer differences and some potential advantages over antibodies. Copyright © 2011 Elsevier Inc. All rights reserved.

Introduction to current and future protein therapeutics: A protein engineering perspective

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carter, Paul J., E-mail: pjc@gene.com

2011-05-15

Protein therapeutics and its enabling sister discipline, protein engineering, have emerged since the early 1980s. The first protein therapeutics were recombinant versions of natural proteins. Proteins purposefully modified to increase their clinical potential soon followed with enhancements derived from protein or glycoengineering, Fc fusion or conjugation to polyethylene glycol. Antibody-based drugs subsequently arose as the largest and fastest growing class of protein therapeutics. The rationale for developing better protein therapeutics with enhanced efficacy, greater safety, reduced immunogenicity or improved delivery comes from the convergence of clinical, scientific, technological and commercial drivers that have identified unmet needs and provided strategies tomore » address them. Future protein drugs seem likely to be more extensively engineered to improve their performance, e.g., antibodies and Fc fusion proteins with enhanced effector functions or extended half-life. Two old concepts for improving antibodies, namely antibody-drug conjugates and bispecific antibodies, have advanced to the cusp of clinical success. As for newer protein therapeutic platform technologies, several engineered protein scaffolds are in early clinical development and offer differences and some potential advantages over antibodies.« less

Designing multifunctional quantum dots for bioimaging, detection, and drug delivery

PubMed Central

Zrazhevskiy, Pavel; Sena, Mark; Gao, Xiaohu

2011-01-01

The emerging field of bionanotechnology aims at revolutionizing biomedical research and clinical practice via introduction of nanoparticle-based tools, expanding capabilities of existing investigative, diagnostic, and therapeutic techniques as well as creating novel instruments and approaches for addressing challenges faced by medicine. Quantum dots (QDs), semiconductor nanoparticles with unique photo-physical properties, have become one of the dominant classes of imaging probes as well as universal platforms for engineering of multifunctional nanodevices. Possessing versatile surface chemistry and superior optical features, QDs have found initial use in a variety of in vitro and in vivo applications. However, careful engineering of QD probes guided by application-specific design criteria is becoming increasingly important for successful transition of this technology from proof-of-concept studies towards real-life clinical applications. This review outlines the major design principles and criteria, from general ones to application-specific, governing the engineering of novel QD probes satisfying the increasing demands and requirements of nanomedicine and discusses the future directions of QD-focused bionanotechnology research (critical review, 201 references). PMID:20697629

Examining Elementary School Students' Transfer of Learning through Engineering Design Using Think-Aloud Protocol Analysis

ERIC Educational Resources Information Center

Kelley, Todd; Sung, Euisuk

2017-01-01

The introduction of engineering practices within the "Next Generation Science Standards" provides technology educators with opportunities to help STEM educators infuse engineering design within a core curriculum. The introduction of teaching engineering design in early elementary grades also provides opportunities to conduct research…

Pre-Engineering Program. Introduction to Engineering. Advanced Engineering.

ERIC Educational Resources Information Center

Henrico County Public Schools, Glen Allen, VA. Virginia Vocational Curriculum and Resource Center.

This guide contains information and hands-on activities to guide students through the problem-solving process needed in engineering (problem solving, presentation, and impact analysis) and information to help the instructor manage the program or courses in Virginia. Following an introduction, the guide contains a program description that supplies…

Engineering the System and Technical Integration

NASA Technical Reports Server (NTRS)

Blair, J. C.; Ryan, R. S.; Schutzenhofer, L. A.

2011-01-01

Approximately 80% of the problems encountered in aerospace systems have been due to a breakdown in technical integration and/or systems engineering. One of the major challenges we face in designing, building, and operating space systems is: how is adequate integration achieved for the systems various functions, parts, and infrastructure? This Contractor Report (CR) deals with part of the problem of how we engineer the total system in order to achieve the best balanced design. We will discuss a key aspect of this question - the principle of Technical Integration and its components, along with management and decision making. The CR will first provide an introduction with a discussion of the Challenges in Space System Design and meeting the challenges. Next is an overview of Engineering the System including Technical Integration. Engineering the System is expanded to include key aspects of the Design Process, Lifecycle Considerations, etc. The basic information and figures used in this CR were presented in a NASA training program for Program and Project Managers Development (PPMD) in classes at Georgia Tech and at Marshall Space Flight Center (MSFC). Many of the principles and illustrations are extracted from the courses we teach for MSFC.

14 CFR 34.80 - Introduction.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT FUEL VENTING AND EXHAUST EMISSION REQUIREMENTS FOR TURBINE ENGINE POWERED AIRPLANES Test Procedures for Engine Smoke Emissions (Aircraft Gas Turbine Engines) § 34.80 Introduction. Except as provided under § 34.5, the...

14 CFR 34.80 - Introduction.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT FUEL VENTING AND EXHAUST EMISSION REQUIREMENTS FOR TURBINE ENGINE POWERED AIRPLANES Test Procedures for Engine Smoke Emissions (Aircraft Gas Turbine Engines) § 34.80 Introduction. Except as provided under § 34.5, the...

An Introduction of Finite Element Method in the Engineering Teaching at the University of Camaguey.

ERIC Educational Resources Information Center

Napoles, Elsa; Blanco, Ramon; Jimenez, Rafael; Mc.Pherson, Yoanka

This paper illuminates experiences related to introducing finite element methods (FEM) in mechanical and civil engineering courses at the University of Camaguey in Cuba and provides discussion on using FEM in postgraduate courses for industry engineers. Background information on the introduction of FEM in engineering teaching is focused on…

Morphological changes in paraurethral area after introduction of tissue engineering construct on the basis of adipose tissue stromal cells.

PubMed

Makarov, A V; Arutyunyan, I V; Bol'shakova, G B; Volkov, A V; Gol'dshtein, D V

2009-10-01

We studied morphological changes in the paraurethral area of Wistar rats after introduction of tissue engineering constructs on the basis of multipotent mesenchymal stem cells and gelatin sponge. The tissue engineering construct containing autologous culture of the stromal fraction of the adipose tissue was most effective. After introduction of this construct we observed more rapid degradation of the construct matrix and more intensive formation of collagen fibers.

The Challenge of the Humanities and Social Science Education Through the Basic Seminar (Science of Snow Sports)

NASA Astrophysics Data System (ADS)

Taniai, Tetsuyuki; Sugimoto, Taku; Sato, Ken-Ichi; Ikota, Masaru

The Education Center of Chiba Institute of Technology is taking a new approach to the introduction of liberal arts subjects commonly included in the curriculum of all departments through a newly established basic seminar, the Science of Snow Sports. Each faculty member has been working on setting up classes that cross the conventional boundaries of fields and disciplines and which are targeted at students of all faculties and departments. This paper describes the potential for teaching liberal arts and social science subjects to engineering students through the medium of sports science, based on actual experience gained via this new approach.

Developing English Communication Expertise for Engineers in the Global Age

NASA Astrophysics Data System (ADS)

Ono, Yoshimasa A.; Morimura, Kumiko

This paper discusses contents and results of a new graduate course “English for Engineers and Scientists” given at School of Engineering, The University of Tokyo. This course is a new attempt to develop English communication expertise for engineering graduate students: how to write technical papers and how to make technical presentations in English. For these purposes, differences in the writing styles and in the sentence structures of English and Japanese are stressed: conclusions come first in English versus conclusions come last in Japanese; the three-step style of introduction, body, and conclusion in English versus the four-step style of ki-sho-ten-ketsu in Japanese. In addition, proper styles of technical papers (rhetoric) and related grammatical points are discussed. Technical presentation course consists of four-week lecture and seven-week practice session. In the lecture, essential points of technical presentations in English are discussed in detail, and in the practice session students‧ presentation skills are improved through guidance and instructions given by native-speaker moderators. The class evaluation results show that most students have obtained necessary skills of technical presentation, indicating that the combined course of lecture and practice session is essential for training students to make better technical presentations in English.

40 CFR 90.104 - Compliance with emission standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Volume Engine Families Engine class Two-stroke engines 1 HC+NOX CO Four-stroke engines HC+NOX CO Engines...). Class IV 1.1 1.1 1.5 1.1 Class V 1.1 1.1 1.5 1.1 1 Two-stroke technologies to which these assigned deterioration factors apply include conventional two-strokes, compression wave designs, and stratified...

40 CFR 90.104 - Compliance with emission standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Volume Engine Families Engine class Two-stroke engines 1 HC+NOX CO Four-stroke engines HC+NOX CO Engines...). Class IV 1.1 1.1 1.5 1.1 Class V 1.1 1.1 1.5 1.1 1 Two-stroke technologies to which these assigned deterioration factors apply include conventional two-strokes, compression wave designs, and stratified...

40 CFR 90.104 - Compliance with emission standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Volume Engine Families Engine class Two-stroke engines 1 HC+NOX CO Four-stroke engines HC+NOX CO Engines...). Class IV 1.1 1.1 1.5 1.1 Class V 1.1 1.1 1.5 1.1 1 Two-stroke technologies to which these assigned deterioration factors apply include conventional two-strokes, compression wave designs, and stratified...

40 CFR 90.104 - Compliance with emission standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Volume Engine Families Engine class Two-stroke engines 1 HC+NOX CO Four-stroke engines HC+NOX CO Engines...). Class IV 1.1 1.1 1.5 1.1 Class V 1.1 1.1 1.5 1.1 1 Two-stroke technologies to which these assigned deterioration factors apply include conventional two-strokes, compression wave designs, and stratified...

40 CFR 90.104 - Compliance with emission standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Volume Engine Families Engine class Two-stroke engines 1 HC+NOX CO Four-stroke engines HC+NOX CO Engines...). Class IV 1.1 1.1 1.5 1.1 Class V 1.1 1.1 1.5 1.1 1 Two-stroke technologies to which these assigned deterioration factors apply include conventional two-strokes, compression wave designs, and stratified...

Curriculum Outline for Introduction to Engineering Chemistry. First Edition. Review Cycle-Annual.

ERIC Educational Resources Information Center

Schlenker, Richard M.

This curriculum outline consists of behavioral objectives (called terminal and enabling objectives) for Introduction to Engineering Chemistry, a one-semester, post-secondary course consisting of four 1-hour lectures each week. Course goal is to introduce marine engineering students to the rudiments of basic/introductory inorganic chemistry. The…

Women and Work. Exploring Race, Ethnicity, and Class. Women and Work, Volume 6.

ERIC Educational Resources Information Center

Higginbotham, Elizabeth, Ed.; Romero, Mary, Ed.

This book contains 10 papers exploring the effects of race, ethnicity, and class on women in the workplace. The following papers are included: "Series Editors' Introduction" (Ann Stromberg, Barbara A. Gutek, Laurie Larwood); "Introduction" (Elizabeth Higginbotham). The book is organized in four parts. Part I, "Historical…

Thermodynamic Cycle Analysis of Magnetohydrodynamic-Bypass Airbreathing Hypersonic Engines

NASA Technical Reports Server (NTRS)

Litchford, Ron J.; Bityurin, Valentine A.; Lineberry, John T.

1999-01-01

Established analyses of conventional ramjet/scramjet performance characteristics indicate that a considerable decrease in efficiency can be expected at off-design flight conditions. This can be explained, in large part, by the deterioration of intake mass flow and limited inlet compression at low flight speeds and by the onset of thrust degradation effects associated with increased burner entry temperature at high flight speeds. In combination, these effects tend to impose lower and upper Mach number limits for practical flight. It has been noted, however, that Magnetohydrodynamic (MHD) energy management techniques represent a possible means for extending the flight Mach number envelope of conventional engines. By transferring enthalpy between different stages of the engine cycle, it appears that the onset of thrust degradation may be delayed to higher flight speeds. Obviously, the introduction of additional process inefficiencies is inevitable with this approach, but it is believed that these losses are more than compensated through optimization of the combustion process. The fundamental idea is to use MHD energy conversion processes to extract and bypass a portion of the intake kinetic energy around the burner. We refer to this general class of propulsion system as an MHD-bypass engine. In this paper, we quantitatively assess the performance potential and scientific feasibility of MHD-bypass airbreathing hypersonic engines using ideal gasdynamics and fundamental thermodynamic principles.

Curriculum Outline for Introduction to Engineering Chemistry. Second Edition. Review Cycle-Annual.

ERIC Educational Resources Information Center

Schlenker, Richard M.

Introduction to Engineering Chemistry is a four-credit hour (one semester) course designed to introduce marine engineering students to the rudiments of basic (introductory) inorganic chemistry. The course consists of 18 units (numbered 1.0 through 18.0) focusing on these subject areas: fundamental concepts; structure of the atom and the periodic…

Effectiveness of Three Case Studies and Associated Teamwork in Stimulating Freshman Interest in an Introduction to Engineering Course

ERIC Educational Resources Information Center

McIntyre, Joseph S.

2011-01-01

The effectiveness of three case studies and associated teamwork to stimulate interest of college freshman in engineering was investigated by observing students. Case studies were assigned as laboratory team exercises in an introduction to engineering course at Auburn University. Student interest in the case studies was evaluated qualitatively…

An Introduction to the Fundamentals of Chemistry for the Marine Engineer.

ERIC Educational Resources Information Center

Schlenker, Richard M.

This document describes an introduction course in the fundamentals of chemistry for marine engineers. The course is modularized, audio tutorial allowing the student to progress at his own rate while integrating laboratory and lecture materials. (SL)

Stirling engine application study

NASA Technical Reports Server (NTRS)

Teagan, W. P.; Cunningham, D.

1983-01-01

A range of potential applications for Stirling engines in the power range from 0.5 to 5000 hp is surveyed. Over one hundred such engine applications are grouped into a small number of classes (10), with the application in each class having a high degree of commonality in technical performance and cost requirements. A review of conventional engines (usually spark ignition or Diesel) was then undertaken to determine the degree to which commercial engine practice now serves the needs of the application classes and to detemine the nature of the competition faced by a new engine system. In each application class the Stirling engine was compared to the conventional engines, assuming that objectives of ongoing Stirling engine development programs are met. This ranking process indicated that Stirling engines showed potential for use in all application classes except very light duty applications (lawn mowers, etc.). However, this potential is contingent on demonstrating much greater operating life and reliability than has been demonstrated to date by developmental Stirling engine systems. This implies that future program initiatives in developing Stirling engine systems should give more emphasis to life and reliability issues than has been the case in ongoing programs.

Introduction to COFFE: The Next-Generation HPCMP CREATE-AV CFD Solver

NASA Technical Reports Server (NTRS)

Glasby, Ryan S.; Erwin, J. Taylor; Stefanski, Douglas L.; Allmaras, Steven R.; Galbraith, Marshall C.; Anderson, W. Kyle; Nichols, Robert H.

2016-01-01

HPCMP CREATE-AV Conservative Field Finite Element (COFFE) is a modular, extensible, robust numerical solver for the Navier-Stokes equations that invokes modularity and extensibility from its first principles. COFFE implores a flexible, class-based hierarchy that provides a modular approach consisting of discretization, physics, parallelization, and linear algebra components. These components are developed with modern software engineering principles to ensure ease of uptake from a user's or developer's perspective. The Streamwise Upwind/Petrov-Galerkin (SU/PG) method is utilized to discretize the compressible Reynolds-Averaged Navier-Stokes (RANS) equations tightly coupled with a variety of turbulence models. The mathematics and the philosophy of the methodology that makes up COFFE are presented.

Results of Using Multimedia Case Studies and Open-Ended Hands-On Design Projects in an "Introduction to Engineering" Course at Hampton University

ERIC Educational Resources Information Center

Halyo, Nesim; Le, Qiang

2011-01-01

This paper describes the implementation of a revised freshman engineering course, "Introduction to Engineering," at Hampton University and the observations of the instructors during its implementation. The authors collaborated with Auburn University faculty in jointly implementing the same course material at both universities. The revised course…

Using an Exploratory Internet Activity & Trivia Game to Teach Students about Biomes

ERIC Educational Resources Information Center

Richardson, Matthew L.

2009-01-01

Students in life science classes need an introduction to biomes, including an introduction to the concept, key biotic and abiotic features of biomes, and geographic locations of biomes. In this activity, students in seventh- and eighth-grade science classes used a directed exploratory Internet activity to learn about biomes. The author tested…

The Use of Flashcards in an Introduction to Psychology Class

ERIC Educational Resources Information Center

Golding, Jonathan M.; Wasarhaley, Nesa E.; Fletcher, Bradford

2012-01-01

Four hundred fifteen undergraduate students in an Introduction to Psychology course voluntarily reported their use of flashcards on three exams as well as answered other questions dealing with flashcard use (e.g., when did a student first use flashcards). Almost 70% of the class used flashcards to study for one or more exams. Students who used…

Introduction to Geostatistics

NASA Astrophysics Data System (ADS)

Kitanidis, P. K.

1997-05-01

Introduction to Geostatistics presents practical techniques for engineers and earth scientists who routinely encounter interpolation and estimation problems when analyzing data from field observations. Requiring no background in statistics, and with a unique approach that synthesizes classic and geostatistical methods, this book offers linear estimation methods for practitioners and advanced students. Well illustrated with exercises and worked examples, Introduction to Geostatistics is designed for graduate-level courses in earth sciences and environmental engineering.

Implications of NGA for NEHRP site coefficients

USGS Publications Warehouse

Borcherdt, Roger D.

2012-01-01

Three proposals are provided to update tables 11.4-1 and 11.4-2 of Minimum Design Loads for Buildings and Other Structures (7-10), by the American Society of Civil Engineers (2010) (ASCE/SEI 7-10), with site coefficients implied directly by NGA (Next Generation Attenuation) ground motion prediction equations (GMPEs). Proposals include a recommendation to use straight-line interpolation to infer site coefficients at intermediate values of ̅vs (average shear velocity). Site coefficients are recommended to ensure consistency with ASCE/SEI 7-10 MCER (Maximum Considered Earthquake) seismic-design maps and simplified site-specific design spectra procedures requiring site classes with associated tabulated site coefficients and a reference site class with unity site coefficients. Recommended site coefficients are confirmed by independent observations of average site amplification coefficients inferred with respect to an average ground condition consistent with that used for the MCER maps. The NGA coefficients recommended for consideration are implied directly by the NGA GMPEs and do not require introduction of additional models.

14 CFR 34.60 - Introduction.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Gaseous Emissions (Aircraft and Aircraft Gas Turbine Engines) § 34.60 Introduction. (a) Except as provided... determine the conformity of new aircraft gas turbine engines with the applicable standards set forth in this... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT FUEL VENTING AND...

14 CFR 34.60 - Introduction.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Gaseous Emissions (Aircraft and Aircraft Gas Turbine Engines) § 34.60 Introduction. (a) Except as provided... determine the conformity of new aircraft gas turbine engines with the applicable standards set forth in this... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT FUEL VENTING AND...

40 CFR 86.085-37 - Production vehicles and engines.

Code of Federal Regulations, 2014 CFR

2014-07-01

... transmission class. (2) Base level means a unique combination of basic engine, inertia weight, and transmission class. (3) Vehicle configuration means a unique combination of basic engine, engine code, inertia weight...

75 FR 22884 - Self-Regulatory Organizations; NYSE Arca, Inc.; Notice of Filing and Immediate Effectiveness of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-30

... uniform time frame for the introduction of new LEAPS on equity option classes, options on exchange traded... minimum volume threshold per underlying class to qualify for the introduction of a new expiration year of... 30 days from the date on which it was filed, or such shorter time as the Commission may designate if...

Introduction to metabolic genetic engineering for the production of valuable secondary metabolites in in vivo and in vitro plant systems.

PubMed

Benedito, Vagner A; Modolo, Luzia V

2014-01-01

Plants are capable of producing a myriad of chemical compounds. While these compounds serve specific functions in the plant, many have surprising effects on the human body, often with positive action against diseases. These compounds are often difficult to synthesize ex vivo and require the coordinated and compartmentalized action of enzymes in living organisms. However, the amounts produced in whole plants are often small and restricted to single tissues of the plant or even cellular organelles, making their extraction an expensive process. Since most natural products used in therapeutics are specialized, secondary plant metabolites, we provide here an overview of the classification of the main classes of these compounds, with its biochemical pathways and how this information can be used to create efficient in and ex planta production pipelines to generate highly valuable compounds. Metabolic genetic engineering is introduced in light of physiological and genetic methods to enhance production of high-value plant secondary metabolites.

Advances in yeast genome engineering.

PubMed

David, Florian; Siewers, Verena

2015-02-01

Genome engineering based on homologous recombination has been applied to yeast for many years. However, the growing importance of yeast as a cell factory in metabolic engineering and chassis in synthetic biology demands methods for fast and efficient introduction of multiple targeted changes such as gene knockouts and introduction of multistep metabolic pathways. In this review, we summarize recent improvements of existing genome engineering methods, the development of novel techniques, for example for advanced genome redesign and evolution, and the importance of endonucleases as genome engineering tools. © FEMS 2015. All rights reserved. For permissions, please e-mail: journals.permission@oup.com.

40 CFR 86.419-78 - Engine displacement, motorcycle classes.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 19 2014-07-01 2014-07-01 false Engine displacement, motorcycle... Emission Regulations for 1978 and Later New Motorcycles, General Provisions § 86.419-78 Engine displacement, motorcycle classes. (a)(1) Engine displacement shall be calculated using nominal engine values and rounded to...

40 CFR 86.419-2006 - Engine displacement, motorcycle classes.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 19 2014-07-01 2014-07-01 false Engine displacement, motorcycle... displacement, motorcycle classes. (a)(1) Engine displacement shall be calculated using nominal engine values... reference in § 86.1). (2) For rotary engines, displacement means the maximum volume of a combustion chamber...

40 CFR 86.419-78 - Engine displacement, motorcycle classes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 18 2011-07-01 2011-07-01 false Engine displacement, motorcycle... Emission Regulations for 1978 and Later New Motorcycles, General Provisions § 86.419-78 Engine displacement, motorcycle classes. (a)(1) Engine displacement shall be calculated using nominal engine values and rounded to...

40 CFR 86.419-2006 - Engine displacement, motorcycle classes.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 19 2012-07-01 2012-07-01 false Engine displacement, motorcycle... displacement, motorcycle classes. (a)(1) Engine displacement shall be calculated using nominal engine values... reference in § 86.1). (2) For rotary engines, displacement means the maximum volume of a combustion chamber...

40 CFR 86.419-78 - Engine displacement, motorcycle classes.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Engine displacement, motorcycle... Emission Regulations for 1978 and Later New Motorcycles, General Provisions § 86.419-78 Engine displacement, motorcycle classes. (a)(1) Engine displacement shall be calculated using nominal engine values and rounded to...

40 CFR 86.419-78 - Engine displacement, motorcycle classes.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 19 2013-07-01 2013-07-01 false Engine displacement, motorcycle... Emission Regulations for 1978 and Later New Motorcycles, General Provisions § 86.419-78 Engine displacement, motorcycle classes. (a)(1) Engine displacement shall be calculated using nominal engine values and rounded to...

40 CFR 86.419-2006 - Engine displacement, motorcycle classes.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 19 2013-07-01 2013-07-01 false Engine displacement, motorcycle... displacement, motorcycle classes. (a)(1) Engine displacement shall be calculated using nominal engine values... reference in § 86.1). (2) For rotary engines, displacement means the maximum volume of a combustion chamber...

40 CFR 86.419-2006 - Engine displacement, motorcycle classes.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Engine displacement, motorcycle... displacement, motorcycle classes. (a)(1) Engine displacement shall be calculated using nominal engine values... reference in § 86.1). (2) For rotary engines, displacement means the maximum volume of a combustion chamber...

40 CFR 86.419-78 - Engine displacement, motorcycle classes.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 19 2012-07-01 2012-07-01 false Engine displacement, motorcycle... Emission Regulations for 1978 and Later New Motorcycles, General Provisions § 86.419-78 Engine displacement, motorcycle classes. (a)(1) Engine displacement shall be calculated using nominal engine values and rounded to...

40 CFR 86.419-2006 - Engine displacement, motorcycle classes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 18 2011-07-01 2011-07-01 false Engine displacement, motorcycle... displacement, motorcycle classes. (a)(1) Engine displacement shall be calculated using nominal engine values... reference in § 86.1). (2) For rotary engines, displacement means the maximum volume of a combustion chamber...

Protein Engineering for Nicotinamide Coenzyme Specificity in Oxidoreductases: Attempts and Challenges.

PubMed

Chánique, Andrea M; Parra, Loreto P

2018-01-01

Oxidoreductases are ubiquitous enzymes that catalyze an extensive range of chemical reactions with great specificity, efficiency, and selectivity. Most oxidoreductases are nicotinamide cofactor-dependent enzymes with a strong preference for NADP or NAD. Because these coenzymes differ in stability, bioavailability and costs, the enzyme preference for a specific coenzyme is an important issue for practical applications. Different approaches for the manipulation of coenzyme specificity have been reported, with different degrees of success. Here we present various attempts for the switching of nicotinamide coenzyme preference in oxidoreductases by protein engineering. This review covers 103 enzyme engineering studies from 82 articles and evaluates the accomplishments in terms of coenzyme specificity and catalytic efficiency compared to wild type enzymes of different classes. We analyzed different protein engineering strategies and related them with the degree of success in inverting the cofactor specificity. In general, catalytic activity is compromised when coenzyme specificity is reversed, however when switching from NAD to NADP, better results are obtained. In most of the cases, rational strategies were used, predominantly with loop exchange generating the best results. In general, the tendency of removing acidic residues and incorporating basic residues is the strategy of choice when trying to change specificity from NAD to NADP, and vice versa . Computational strategies and algorithms are also covered as helpful tools to guide protein engineering strategies. This mini review aims to give a general introduction to the topic, giving an overview of tools and information to work in protein engineering for the reversal of coenzyme specificity.

National Research Council Dialogue to Assess Progress on NASA's Systems Engineering Cost/Risk Analysis Capability Roadmap Development: General Background and Introduction

NASA Technical Reports Server (NTRS)

Regenie, Victoria

2005-01-01

Contents include the following: General Background and Introduction of Capability. Roadmaps for Systems Engineering Cost/Risk Analysis. Agency Objectives. Strategic Planning Transformation. Review Capability Roadmaps and Schedule. Review Purpose of NRC Review. Capability Roadmap Development (Progress to Date).

40 CFR 91.1103 - Prohibited acts.

Code of Federal Regulations, 2010 CFR

2010-07-01

... case of a manufacturer of new marine SI engines or vessels for distribution in commerce, the sale, the offering for sale, or the introduction, or delivery for introduction, into commerce, of any new marine SI... deliver into commerce, a marine SI engine unless the manufacturer has complied with the requirements of...

"Why Did You Blend My Learning?" A Comparison of Student Success in Lecture and Blended Learning Introduction to Sociology Courses

ERIC Educational Resources Information Center

Luna, Yvonne M.; Winters, Stephanie A.

2017-01-01

Introduction to Sociology at a large public university was taught in two separate formats, blended learning and lecture, during the same semester by the first author. While some similarities existed, the distinction was in delivery of course content. Additionally, the blended class had one-third less in-class time that was primarily devoted to…

Development of naval diesel engine duty cycles for air exhaust emission environmental impact analysis. Master's thesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Markle, S.P.

1994-05-01

A strategy for testing naval diesel engines for exhaust emissions was developed. A survey of existing international and national standard diesel engine duty cycles was conducted. All were found to be inadequate for testing and certification of engine exhaust emissions from naval diesel powered ships. Naval ship data covering 11,500 hours of engine operation of four U.S. Navy LSD 41 Class amphibious ships was analyzed to develop a 27 point class operating profile. A procedure combining ship hull form characteristics, ship propulsion plant parameters, and ship operating profile was detailed to derive an 11-Mode duty cycle representative for testing LSDmore » 41 Class propulsion diesel engines. A similar procedure was followed for ship service diesel engines. Comparisons with industry accepted duty cycles were conducted using exhaust emission contour plots for the Colt-Pielstick PC-4B diesel engines. Results showed the 11-Mode LSD 41 Class Duty Cycle best predicted ship propulsion engine emissions compared to the 27 point operating profile propeller curve. The procedure was applied to T-AO 187 Class with similar results. The application of civilian industry standards to measure naval diesel ship propulsion engine exhaust emissions was found to be inadequate. Engine exhaust flow chemistry post turbocharger was investigated using the SANDIA Lab computer tool CHEMKIN. Results showed oxidation and reduction reactions within exhaust gases are quenched in the exhaust stack. Since the exhaust stream in the stack is unreactive, emission sampling may be performed where most convenient. A proposed emission measurement scheme for LSD 41 Class ships was presented.« less

Andragogical Model in Language Training of Mining Specialists

NASA Astrophysics Data System (ADS)

Bondareva, Evgeniya; Chistyakova, Galina; Kleshevskyi, Yury; Sergeev, Sergey; Stepanov, Aleksey

2017-11-01

Nowadays foreign language competence is one of the main professional skills of mining engineers. Modern competitive conditions require the ability for meeting production challenges in a foreign language from specialists and managers of mining enterprises. This is the reason of high demand on foreign language training/retraining courses. Language training of adult learners fundamentally differs from children and adolescent education. The article describes the features of andragogical learning model. The authors conclude that distance learning is the most productive education form having a number of obvious advantages over traditional (in-class) one. Interactive learning method that involves active engagement of adult trainees appears to be of the greatest interest due to introduction of modern information and communication technologies for distance learning.

40 CFR 87.21 - Standards for exhaust emissions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... aircraft gas turbine engine of class T8 manufactured on or after February 1, 1974, shall not exceed: Smoke number of 30. (b) Exhaust emissions of smoke from each new aircraft gas turbine engine of class TF and of... gas turbine engine of class T3 manufactured on or after January 1, 1978, shall not exceed: Smoke...

40 CFR 87.21 - Standards for exhaust emissions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... aircraft gas turbine engine of class T8 manufactured on or after February 1, 1974, shall not exceed: Smoke number of 30. (b) Exhaust emissions of smoke from each new aircraft gas turbine engine of class TF and of... gas turbine engine of class T3 manufactured on or after January 1, 1978, shall not exceed: Smoke...

The Influence of Circadian Type, Time of Day and Class Difficulty on Students' Grades

ERIC Educational Resources Information Center

McElroy, Todd; Mosteller, Lynn

2006-01-01

Introduction: In this paper we investigate how students' class grades are affected by individual differences in circadian rhythm, class time-of-day and class difficulty. Method: Using a sample of university students, we assessed morningness and eveningness personality type, and then obtained students recalled classes as well as their…

40 CFR 90.410 - Engine test cycle.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Engine test cycle. 90.410 Section 90... Procedures § 90.410 Engine test cycle. (a) Follow the appropriate 6-mode test cycle for Class I, I-B and II engines and 2-mode test cycle for Class I-A, III, IV, and V engines when testing spark-ignition engines...

Changing the Engineering Student Culture with Respect to Academic Integrity and Ethics.

PubMed

VanDeGrift, Tammy; Dillon, Heather; Camp, Loreal

2017-08-01

Engineers create airplanes, buildings, medical devices, and software, amongst many other things. Engineers abide by a professional code of ethics to uphold people's safety and the reputation of the profession. Likewise, students abide by a code of academic integrity while learning the knowledge and necessary skills to prepare them for the engineering and computing professions. This paper reports on studies designed to improve the engineering student culture with respect to academic integrity and ethics. To understand the existing culture at a university in the USA, a survey based on a national survey about cheating was administered to students. The incidences of self-reported cheating and incidences of not reporting others who cheat show the culture is similar to other institutions. Two interventions were designed and tested in an introduction to an engineering course: two case studies that students discussed in teams and the whole class, and a letter of recommendation assignment in which students wrote about themselves (character, strengths, examples of ethical decisions) three years into the future. Students were surveyed after the two interventions. Results show that first-year engineering students appreciate having a code of academic integrity and they want to earn their degree without cheating, yet less than half of the students would report on another cheating student. The letter of recommendation assignment had some impact on getting students to think about ethics, their character, and their actions. Future work in changing the student culture will continue in both a top-down (course interventions) and bottom-up (student-driven interventions) manner.

77 FR 41204 - Sunshine Act Meetings; National Science Board

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-12

... Activities Introduction of Chapter Authors and Discussion of Science and Engineering Indicators 2014... introduction) 8:20-8:30 a.m. (SCF) 8:30-11:00 a.m. (previously noticed continuation of CPP meeting) 11:00-11:45... Chairman's Closing Remarks Committee on Science & Engineering Indicators (SEI) Open Session: 1:30-4:00 p.m...

Engineering design activities and conceptual change in middle school science

NASA Astrophysics Data System (ADS)

Schnittka, Christine G.

The purpose of this research was to investigate the impact of engineering design classroom activities on conceptual change in science, and on attitudes toward and knowledge about engineering. Students were given a situated learning context and a rationale for learning science in an active, inquiry-based method, and worked in small collaborative groups. One eighth-grade physical science teacher and her students participated in a unit on heat transfer and thermal energy. One class served as the control while two others received variations of an engineering design treatment. Data were gathered from teacher and student entrance and exit interviews, audio recordings of student dialog during group work, video recordings and observations of all classes, pre- and posttests on science content and engineering attitudes, and artifacts and all assignments completed by students. Qualitative and quantitative data were collected concurrently, but analysis took place in two phases. Qualitative data were analyzed in an ongoing manner so that the researcher could explore emerging theories and trends as the study progressed. These results were compared to and combined with the results of the quantitative data analysis. Analysis of the data was carried out in the interpretive framework of analytic induction. Findings indicated that students overwhelmingly possessed alternative conceptions about heat transfer, thermal energy, and engineering prior to the interventions. While all three classes made statistically significant gains in their knowledge about heat and energy, students in the engineering design class with the targeted demonstrations made the most significant gains over the other two other classes. Engineering attitudes changed significantly in the two classes that received the engineering design intervention. Implications from this study can inform teachers' use of engineering design activities in science classrooms. These implications are: (1) Alternative conceptions will persist when not specifically addressed. (2) Engineering design activities are not enough to promote conceptual change. (3) A middle school teacher can successfully implement an engineering design-based curriculum in a science class. (4) Results may also be of interest to science curriculum developers and engineering educators involved in developing engineering outreach curricula for middle school students.

14 CFR 61.5 - Certificates and ratings issued under this part.

Code of Federal Regulations, 2013 CFR

2013-01-01

...-control aircraft. (2) Airplane class ratings— (i) Single-engine land. (ii) Multiengine land. (iii) Single-engine sea. (iv) Multiengine sea. (3) Rotorcraft class ratings— (i) Helicopter. (ii) Gyroplane. (4) Lighter-than-air class ratings— (i) Airship. (ii) Balloon. (5) Weight-shift-control aircraft class ratings...

14 CFR 61.5 - Certificates and ratings issued under this part.

Code of Federal Regulations, 2014 CFR

2014-01-01

...-control aircraft. (2) Airplane class ratings— (i) Single-engine land. (ii) Multiengine land. (iii) Single-engine sea. (iv) Multiengine sea. (3) Rotorcraft class ratings— (i) Helicopter. (ii) Gyroplane. (4) Lighter-than-air class ratings— (i) Airship. (ii) Balloon. (5) Weight-shift-control aircraft class ratings...

14 CFR 61.5 - Certificates and ratings issued under this part.

Code of Federal Regulations, 2012 CFR

2012-01-01

...-control aircraft. (2) Airplane class ratings— (i) Single-engine land. (ii) Multiengine land. (iii) Single-engine sea. (iv) Multiengine sea. (3) Rotorcraft class ratings— (i) Helicopter. (ii) Gyroplane. (4) Lighter-than-air class ratings— (i) Airship. (ii) Balloon. (5) Weight-shift-control aircraft class ratings...

40 CFR 1054.740 - What special provisions apply for generating and using emission credits?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 2013 model years. You may not use these transitional credits for Class I engines. (2) Enduring credits... in the 2012 and 2013 model years for Class I engines and only in the 2011 through 2013 model years... credits you may use under this paragraph (c) for each engine class. (4) For 2013 and earlier model years...

Teaching Engineering Students Team Work

NASA Technical Reports Server (NTRS)

Levi, Daniel

1998-01-01

The purpose of this manual is to provide professor's in engineering classes which the background necessary to use student team projects effectively. This manual describes some of the characteristics of student teams and how to use them in class. It provides a set of class activities and films which can be used to introduce and support student teams. Finally, a set of teaching modules used in freshmen, sophomore, and senior aeronautical engineering classes are presented. This manual was developed as part of a NASA sponsored project to improve the undergraduate education of aeronautical engineers. The project has helped to purchase a set of team work films which can be checked out from Cal Poly's Learning Resources Center in the Kennedy Library. Research for this project has included literature reviews on team work and cooperative learning; interviews, observations, and surveys of Cal Poly students from Industrial and Manufacturing Engineering, Aeronautical Engineering and Psychology; participation in the Aeronautical Engineering senior design lab; and interviews with engineering faculty. In addition to this faculty manual, there is a student team work manual which has been designed to help engineering students work better in teams.

Structural Basis of Glyphosate Resistance Resulting from the Double Mutation Thr97 → Ile and Pro101 → Ser in 5-Enolpyruvylshikimate-3-phosphate Synthase from Escherichia coli*S⃞

PubMed Central

Funke, Todd; Yang, Yan; Han, Huijong; Healy-Fried, Martha; Olesen, Sanne; Becker, Andreas; Schönbrunn, Ernst

2009-01-01

The shikimate pathway enzyme 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS) is the target of the broad spectrum herbicide glyphosate. The genetic engineering of EPSPS led to the introduction of glyphosate-resistant crops worldwide. The genetically engineered corn lines NK603 and GA21 carry distinct EPSPS enzymes. CP4 EPSPS, expressed in NK603 corn and transgenic soybean, cotton, and canola, belongs to class II EPSPS, glyphosate-insensitive variants of this enzyme isolated from certain Gram-positive bacteria. GA21 corn, on the other hand, was created by point mutations of class I EPSPS, such as the enzymes from Zea mays or Escherichia coli, which are sensitive to low glyphosate concentrations. The structural basis of the glyphosate resistance resulting from these point mutations has remained obscure. We studied the kinetic and structural effects of the T97I/P101S double mutation, the molecular basis for GA21 corn, using EPSPS from E. coli. The T97I/P101S enzyme is essentially insensitive to glyphosate (Ki = 2.4 mm) but maintains high affinity for the substrate phosphoenolpyruvate (PEP) (Km = 0.1 mm). The crystal structure at 1.7-Å resolution revealed that the dual mutation causes a shift of residue Gly96 toward the glyphosate binding site, impairing efficient binding of glyphosate, while the side chain of Ile97 points away from the substrate binding site, facilitating PEP utilization. The single site T97I mutation renders the enzyme sensitive to glyphosate and causes a substantial decrease in the affinity for PEP. Thus, only the concomitant mutations of Thr97 and Pro101 induce the conformational changes necessary to produce catalytically efficient, glyphosate-resistant class I EPSPS. PMID:19211556

Structural basis of glyphosate resistance resulting from the double mutation Thr97 -> Ile and Pro101 -> Ser in 5-enolpyruvylshikimate-3-phosphate synthase from Escherichia coli.

PubMed

Funke, Todd; Yang, Yan; Han, Huijong; Healy-Fried, Martha; Olesen, Sanne; Becker, Andreas; Schönbrunn, Ernst

2009-04-10

The shikimate pathway enzyme 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS) is the target of the broad spectrum herbicide glyphosate. The genetic engineering of EPSPS led to the introduction of glyphosate-resistant crops worldwide. The genetically engineered corn lines NK603 and GA21 carry distinct EPSPS enzymes. CP4 EPSPS, expressed in NK603 corn and transgenic soybean, cotton, and canola, belongs to class II EPSPS, glyphosate-insensitive variants of this enzyme isolated from certain Gram-positive bacteria. GA21 corn, on the other hand, was created by point mutations of class I EPSPS, such as the enzymes from Zea mays or Escherichia coli, which are sensitive to low glyphosate concentrations. The structural basis of the glyphosate resistance resulting from these point mutations has remained obscure. We studied the kinetic and structural effects of the T97I/P101S double mutation, the molecular basis for GA21 corn, using EPSPS from E. coli. The T97I/P101S enzyme is essentially insensitive to glyphosate (K(i) = 2.4 mm) but maintains high affinity for the substrate phosphoenolpyruvate (PEP) (K(m) = 0.1 mm). The crystal structure at 1.7-A resolution revealed that the dual mutation causes a shift of residue Gly(96) toward the glyphosate binding site, impairing efficient binding of glyphosate, while the side chain of Ile(97) points away from the substrate binding site, facilitating PEP utilization. The single site T97I mutation renders the enzyme sensitive to glyphosate and causes a substantial decrease in the affinity for PEP. Thus, only the concomitant mutations of Thr(97) and Pro(101) induce the conformational changes necessary to produce catalytically efficient, glyphosate-resistant class I EPSPS.

75 FR 36211 - Requirements for Distribution of Byproduct Material

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-24

.... Submitting Comments and Accessing Information II. Background A. Introduction B. Regulatory Framework III.... Introduction The Commission has authority to issue both general and specific licenses for the use of byproduct... Products As noted in the introduction on regulatory framework, class exemptions allow the Commission to...

Engineering applications of metaheuristics: an introduction

NASA Astrophysics Data System (ADS)

Oliva, Diego; Hinojosa, Salvador; Demeshko, M. V.

2017-01-01

Metaheuristic algorithms are important tools that in recent years have been used extensively in several fields. In engineering, there is a big amount of problems that can be solved from an optimization point of view. This paper is an introduction of how metaheuristics can be used to solve complex problems of engineering. Their use produces accurate results in problems that are computationally expensive. Experimental results support the performance obtained by the selected algorithms in such specific problems as digital filter design, image processing and solar cells design.

AUTOMOTIVE DIESEL MAINTENANCE 1. UNIT I, GENERAL INTRODUCTION TO DIESEL ENGINES.

ERIC Educational Resources Information Center

Human Engineering Inst., Cleveland, OH.

ONE OF A 30-MODULE COURSE DESIGNED TO UPGRADE THE JOB SKILLS AND TECHNICAL KNOWLEDGE OF DIESEL MAINTENANCE MECHANICS, THIS MATERIAL WAS DEVELOPED BY INDUSTRIAL TRAINING AND SUBJECT-MATTER SPECIALISTS AND TESTED IN INDUSTRIAL TRAINING SITUATIONS. THE PURPOSE OF THIS FIRST UNIT IS TO PROVIDE AN INTRODUCTION TO DIESEL ENGINES BY DEVELOPING AN…

Indian Middle Class Makes Mission Out of Sending Children to College: Primary Focus on Engineering, Medical Studies

ERIC Educational Resources Information Center

Honawar, Vaishali

2005-01-01

In India, putting a child through engineering or medical college is, for many middle-class families, a life's mission in a way that is almost unknown in the United States. Though middle-class families in India have long steered their children into professions like engineering and medicine, the trend has taken off over the past decade. It's been…

What's in a Name? Impact of marketing different course titles on enrollment for online classes.

PubMed

Kemper, Kathi J; Woods, Charles; McBride, Allison

2008-12-01

Little is known about the impact of different marketing strategies on enrollment of online courses for health professionals. The authors compared one aspect of marketing, course titles, for online classes about herbs and dietary supplements (HDS). The authors marketed two titles-one knowledge-oriented, the other behavior-oriented-for each of seven online HDS classes. The two titles were (1) "Introduction to topic" (Knowledge) and (2) "Talking with patients about topic" (Behavior). The seven classes were two general (introduction and safety) and five specialty (women, children, the elderly, depression, and gastrointestinal) topics. The Area Health Education Center in northwest North Carolina marketed the classes. Altogether, 195 clinicians enrolled in an average of 7.6 classes per enrollee (1,487 total). For every class, enrollment was higher for knowledge-oriented than behavior-oriented titled classes (average of 124 versus 89 enrollees per class, P < .01). Enrollment, combining the two general classes, was also significantly higher for general than specialty classes (266 versus 191 enrollees per class, P < .01). Differences in titles and levels of generality significantly impacted enrollment rates in these online classes on an unfamiliar topic. Additional marketing research is needed to inform efforts to enroll clinicians into courses on more familiar topics.

Megawatt Class Nuclear Space Power Systems (MCNSPS) conceptual design and evaluation report. Volume 1: Objectives, summary results and introduction

NASA Technical Reports Server (NTRS)

Wetch, J. R.

1988-01-01

The objective was to determine which reactor, conversion, and radiator technologies would best fulfill future Megawatt Class Nuclear Space Power System Requirements. Specifically, the requirement was 10 megawatts for 5 years of full power operation and 10 years systems life on orbit. A variety of liquid metal and gas cooled reactors, static and dynamic conversion systems, and passive and dynamic radiators were considered. Four concepts were selected for more detailed study. The concepts are: a gas cooled reactor with closed cycle Brayton turbine-alternator conversion with heat pipe and pumped tube-fin heat rejection; a lithium cooled reactor with a free piston Stirling engine-linear alternator and a pumped tube-fin radiator; a lithium cooled reactor with potassium Rankine turbine-alternator and heat pipe radiator; and a lithium cooled incore thermionic static conversion reactor with a heat pipe radiator. The systems recommended for further development to meet a 10 megawatt long life requirement are the lithium cooled reactor with the K-Rankine conversion and heat pipe radiator, and the lithium cooled incore thermionic reactor with heat pipe radiator.

High-Fidelity Simulation in Biomedical and Aerospace Engineering

NASA Technical Reports Server (NTRS)

Kwak, Dochan

2005-01-01

Contents include the following: Introduction / Background. Modeling and Simulation Challenges in Aerospace Engineering. Modeling and Simulation Challenges in Biomedical Engineering. Digital Astronaut. Project Columbia. Summary and Discussion.

Wave rotor-enhanced gas turbine engines

NASA Technical Reports Server (NTRS)

Welch, Gerard E.; Scott, Jones M.; Paxson, Daniel E.

1995-01-01

The benefits of wave rotor-topping in small (400 to 600 hp-class) and intermediate (3000 to 4000 hp-class) turboshaft engines, and large (80,000 to 100,000 lb(sub f)-class) high bypass ratio turbofan engines are evaluated. Wave rotor performance levels are calculated using a one-dimensional design/analysis code. Baseline and wave rotor-enhanced engine performance levels are obtained from a cycle deck in which the wave rotor is represented as a burner with pressure gain. Wave rotor-toppings is shown to significantly enhance the specific fuel consumption and specific power of small and intermediate size turboshaft engines. The specific fuel consumption of the wave rotor-enhanced large turbofan engine can be reduced while operating at significantly reduced turbine inlet temperature. The wave rotor-enhanced engine is shown to behave off-design like a conventional engine. Discussion concerning the impact of the wave rotor/gas turbine engine integration identifies tenable technical challenges.

Lateral dampers for thrust bearings

NASA Technical Reports Server (NTRS)

Hibner, D. H.; Szafir, D. R.

1985-01-01

The development of lateral damping schemes for thrust bearings was examined, ranking their applicability to various engine classes, selecting the best concept for each engine class and performing an in-depth evaluation. Five major engine classes were considered: large transport, military, small general aviation, turboshaft, and non-manrated. Damper concepts developed for evaluation were: curved beam, constrained and unconstrained elastomer, hybrid boost bearing, hydraulic thrust piston, conical squeeze film, and rolling element thrust face.

Protein Engineering for Nicotinamide Coenzyme Specificity in Oxidoreductases: Attempts and Challenges

PubMed Central

Chánique, Andrea M.; Parra, Loreto P.

2018-01-01

Oxidoreductases are ubiquitous enzymes that catalyze an extensive range of chemical reactions with great specificity, efficiency, and selectivity. Most oxidoreductases are nicotinamide cofactor-dependent enzymes with a strong preference for NADP or NAD. Because these coenzymes differ in stability, bioavailability and costs, the enzyme preference for a specific coenzyme is an important issue for practical applications. Different approaches for the manipulation of coenzyme specificity have been reported, with different degrees of success. Here we present various attempts for the switching of nicotinamide coenzyme preference in oxidoreductases by protein engineering. This review covers 103 enzyme engineering studies from 82 articles and evaluates the accomplishments in terms of coenzyme specificity and catalytic efficiency compared to wild type enzymes of different classes. We analyzed different protein engineering strategies and related them with the degree of success in inverting the cofactor specificity. In general, catalytic activity is compromised when coenzyme specificity is reversed, however when switching from NAD to NADP, better results are obtained. In most of the cases, rational strategies were used, predominantly with loop exchange generating the best results. In general, the tendency of removing acidic residues and incorporating basic residues is the strategy of choice when trying to change specificity from NAD to NADP, and vice versa. Computational strategies and algorithms are also covered as helpful tools to guide protein engineering strategies. This mini review aims to give a general introduction to the topic, giving an overview of tools and information to work in protein engineering for the reversal of coenzyme specificity. PMID:29491854

A Simple Interactive Introduction to Teaching Genetic Engineering

ERIC Educational Resources Information Center

Child, Paula

2013-01-01

In the UK, at key stage 4, students aged 14-15 studying GCSE Core Science or Unit 1 of the GCSE Biology course are required to be able to describe the process of genetic engineering to produce bacteria that can produce insulin. The simple interactive introduction described in this article allows students to consider the problem, devise a model and…

Introduction to Flight Test Engineering (Introduction aux techniques des essais en vol)

DTIC Science & Technology

2005-07-01

or aircraft parameters • Calculations in the frequency domain ( Fast Fourier Transform) • Data analysis with dedicated software for: • Signal...density Fast Fourier Transform Transfer function analysis Frequency response analysis Etc. PRESENTATION Color/black & white Display screen...envelope by operating the airplane at increasing ranges - representing increasing risk - of engine operation, airspeeds both fast and slow, altitude

21 CFR 868.5780 - Tube introduction forceps.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Identification. Tube introduction forceps (e.g., Magill forceps) are a right-angled device used to grasp a tracheal tube and place it in a patient's trachea. (b) Classification. Class I (general controls). The...

21 CFR 868.5780 - Tube introduction forceps.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Identification. Tube introduction forceps (e.g., Magill forceps) are a right-angled device used to grasp a tracheal tube and place it in a patient's trachea. (b) Classification. Class I (general controls). The...

21 CFR 868.5780 - Tube introduction forceps.

Code of Federal Regulations, 2014 CFR

2014-04-01

...) Identification. Tube introduction forceps (e.g., Magill forceps) are a right-angled device used to grasp a tracheal tube and place it in a patient's trachea. (b) Classification. Class I (general controls). The...

21 CFR 868.5780 - Tube introduction forceps.

Code of Federal Regulations, 2012 CFR

2012-04-01

...) Identification. Tube introduction forceps (e.g., Magill forceps) are a right-angled device used to grasp a tracheal tube and place it in a patient's trachea. (b) Classification. Class I (general controls). The...

21 CFR 868.5780 - Tube introduction forceps.

Code of Federal Regulations, 2013 CFR

2013-04-01

...) Identification. Tube introduction forceps (e.g., Magill forceps) are a right-angled device used to grasp a tracheal tube and place it in a patient's trachea. (b) Classification. Class I (general controls). The...

Diesel Technology: Engines. [Teacher and Student Editions.

ERIC Educational Resources Information Center

Barbieri, Dave; Miller, Roger; Kellum, Mary

Competency-based teacher and student materials on diesel engines are provided for a diesel technology curriculum. Seventeen units of instruction cover the following topics: introduction to engine principles and procedures; engine systems and components; fuel systems; engine diagnosis and maintenance. The materials are based on the…

40 CFR 87.21 - Exhaust emission standards for Tier 4 and earlier engines.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Emissions (New Aircraft Gas Turbine Engines) § 87.21 Exhaust emission standards for Tier 4 and earlier... standards. (a) Exhaust emissions of smoke from each new aircraft gas turbine engine of class T8 manufactured... from each new aircraft gas turbine engine of class TF and of rated output of 129 kilonewtons thrust or...

40 CFR 87.21 - Exhaust emission standards for Tier 4 and earlier engines.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Emissions (New Aircraft Gas Turbine Engines) § 87.21 Exhaust emission standards for Tier 4 and earlier... standards. (a) Exhaust emissions of smoke from each new aircraft gas turbine engine of class T8 manufactured... from each new aircraft gas turbine engine of class TF and of rated output of 129 kilonewtons thrust or...

A Course to Promote Informed Selection of an Engineering Major Using a Partially Flipped Classroom Model

ERIC Educational Resources Information Center

Meyers, Kerry Lynn

2016-01-01

A 1 credit hour First-Year Engineering Course which provides background to students on the engineering disciplinary options available to them was redesigned to help inform the selection of their engineering major for future study. Initially, course administration was a large lecture class but was transformed into smaller classes that were…

Class Size.

ERIC Educational Resources Information Center

Ellis, Thomas I.

1985-01-01

After a brief introduction identifying current issues and trends in research on class size, this brochure reviews five recent studies bearing on the relationship of class size to educational effectiveness. Part 1 is a review of two interrelated and highly controversial "meta-analyses" or statistical integrations of research findings on…

A Large-Scale Blended and Flipped Class: Class Design and Investigation of Factors Influencing Students' Intention to Learn

ERIC Educational Resources Information Center

Zhang, Yulei; Dang, Yan; Amer, Beverly

2016-01-01

This paper reports a study of a large-scale blended and flipped class and has two major parts. First, it presents the design of the class, i.e., a coordinated and multisection undergraduate introduction-to-computer-information-systems course. The detailed design of various teaching methods used in the class is presented, including a digital…

An Integrative Approach to STEM Concepts in an Introductory Neuroscience Course: Gains in Interdisciplinary Awareness

PubMed Central

Basu, Alo C.; Mondoux, Michelle A.; Whitt, Jessica L.; Isaacs, André K.; Narita, Tomohiko

2017-01-01

Neuroscience is an integrative discipline for which students must achieve broad-based proficiency in many of the sciences. We are motivated by the premise that student pursuit of proficiency in science, technology, engineering, and mathematics (STEM) can be supported by awareness of the application of knowledge and tools from the various disciplines for solving complex problems. We refer to this awareness as “interdisciplinary awareness.” Faculty from biology, chemistry, mathematics/computer science, physics, and psychology departments contributed to a novel integrative introductory neuroscience course with no pre-requisites. STEM concepts were taught in “flipped” class modules throughout the semester: Students viewed brief videos and completed accompanying homework assignments independently. In subsequent class meetings, students applied the STEM concepts to understand nervous system structure and function through engaged learning activities. The integrative introduction to neuroscience course was compared to two other courses to test the hypothesis that it would lead to greater gains in interdisciplinary awareness than courses that overlap in content but were not designed for this specific goal. Data on interdisciplinary awareness were collected using previously published tools at the beginning and end of each course, enabling within-subject analyses. Students in the integrative course significantly increased their identification of scientific terms as relevant to neuroscience in a term-discipline relevance survey and increased their use of terms related to levels of analysis (e.g., molecular, cellular, systems) in response to an open-ended prompt. These gains were seen over time within the integrative introduction to neuroscience course as well as relative to the other two courses. PMID:29371849

The Class Size Policy Debate. Working Paper No. 121.

ERIC Educational Resources Information Center

Krueger, Alan B.; Hanushek, Eric A.

These papers examine research on the impact of class size on student achievement. After an "Introduction," (Richard Rothstein), Part 1, "Understanding the Magnitude and Effect of Class Size on Student Achievement" (Alan B. Krueger), presents a reanalysis of Hanushek's 1997 literature review, criticizing Hanushek's vote-counting…

What Works for Me

ERIC Educational Resources Information Center

Plachta, Susan M.; Morris, Kevin

2009-01-01

In this article, the authors discuss what works for them in their first-year composition classes. In order to promote critical thinking and goal setting within her developmental writing and first-year composition classes, Susan Plachta begins their first class session by completing the standard introductions and syllabus discussions and finishes…

Annual Data Summary for 1986 CERC (Coastal Engineering Research Center) Field Research Facility. Volume 1. Main Text and Appendix A

DTIC Science & Technology

1988-08-01

Waterways Experiment Station, Corps of Engineers PO Box 631, Vicksburg, Mississippi 39180-0631 DTI ~;~c~v ~ jAUG 291988 : H Ke August 1988 Final Report...PART I: INTRODUCTION ................................................ 3 Background ........................................................ 3...Information Service, 5285 Port Royal Road, Springfield, VA. 22161. 2 ANNUAL DATA SUMMARY FOR 1986 CERC FIELD RESEARCH FACILITY PART I: INTRODUCTION

Renovation of a Mechanical Engineering Senior Design Class to an Industry-Tied and Team-Oriented Course

ERIC Educational Resources Information Center

Liu, Yucheng

2017-01-01

In this work, an industry-based and team-oriented education model was established based on a traditional mechanical engineering (ME) senior design class in order to better prepare future engineers and leaders so as to meet the increasing demand for high-quality engineering graduates. In the renovated curriculum, industry-sponsored projects became…

Pollution reduction technology program for small jet aircraft engines: Class T1

NASA Technical Reports Server (NTRS)

Bruce, T. W.; Davis, F. G.; Mongia, H. C.

1977-01-01

Small jet aircraft engines (EPA class T1, turbojet and turbofan engines of less than 35.6 kN thrust) were evaluated with the objective of attaining emissions reduction consistent with performance constraints. Configurations employing the technological advances were screened and developed through full scale rig testing. The most promising approaches in full-scale engine testing were evaluated.

Contribution de la Psychologie a l'Enseignement des Langues Etrangeres et a l'Introduction de la Television en Classe de Langue (Contribution of Psychology to Foreign Language Instruction and to the Introduction of Television in the Language Class).

ERIC Educational Resources Information Center

Engelkamp, Johannes

1980-01-01

Analyzes the psychological factors relevant to the acquisition of a second language and the behavior theories that have had the most dramatic impact on teaching methodology. Advocates a broader use of television in language instruction as a means of clarifying meanings through a visual context tailored to certain pedagogical requirements. (MES)

14 CFR 34.3 - General requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... powered by aircraft gas turbine engines of the classes specified herein and that have U.S. standard...), this FAR applies to civil airplanes that are powered by aircraft gas turbine engines of the classes... EXHAUST EMISSION REQUIREMENTS FOR TURBINE ENGINE POWERED AIRPLANES General Provisions § 34.3 General...

14 CFR 34.3 - General requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... powered by aircraft gas turbine engines of the classes specified herein and that have U.S. standard...), this FAR applies to civil airplanes that are powered by aircraft gas turbine engines of the classes... EXHAUST EMISSION REQUIREMENTS FOR TURBINE ENGINE POWERED AIRPLANES General Provisions § 34.3 General...

14 CFR 34.3 - General requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... EXHAUST EMISSION REQUIREMENTS FOR TURBINE ENGINE POWERED AIRPLANES General Provisions § 34.3 General... powered by aircraft gas turbine engines of the classes specified herein and that have U.S. standard...), this FAR applies to civil airplanes that are powered by aircraft gas turbine engines of the classes...

Timing of food introduction and development of food sensitization in a prospective birth cohort.

PubMed

Tran, Maxwell M; Lefebvre, Diana L; Dai, David; Dharma, Christoffer; Subbarao, Padmaja; Lou, Wendy; Azad, Meghan B; Becker, Allan B; Mandhane, Piush J; Turvey, Stuart E; Sears, Malcolm R

2017-08-01

The effect of infant feeding practices on the development of food allergy remains controversial. We examined the relationship between timing and patterns of food introduction and sensitization to foods at age 1 year in the Canadian Healthy Infant Longitudinal Development (CHILD) birth cohort study. Nutrition questionnaire data prospectively collected at age 3, 6, 12, 18, and 24 months were used to determine timing of introduction of cow's milk products, egg, and peanut. At age 1 year, infants underwent skin prick testing to cow's milk, egg white, and peanut. Logistic regression models were fitted to assess the impact of timing of food exposures on sensitization outcomes, and latent class analysis was used to study patterns of food introduction within the cohort. Among 2124 children with sufficient data, delaying introduction of cow's milk products, egg, and peanut beyond the first year of life significantly increased the odds of sensitization to that food (cow's milk adjOR 3.69, 95% CI 1.37-9.08; egg adjOR 1.89, 95% CI 1.25-2.80; peanut adjOR 1.76, 95% CI 1.07-3.01). Latent class analysis produced a three-class model: early, usual, and delayed introduction. A pattern of delayed introduction, characterized by avoidance of egg and peanut during the first year of life, increased the odds of sensitization to any of the three tested foods (adjOR 1.78, 95% CI 1.26-2.49). Avoidance of potentially allergenic foods during the first year of life significantly increased the odds of sensitization to the corresponding foods. © 2017 The Authors. Pediatric Allergy and Immunology Published by John Wiley & Sons Ltd.

Overview of rocket engine control

NASA Technical Reports Server (NTRS)

Lorenzo, Carl F.; Musgrave, Jeffrey L.

1991-01-01

The issues of Chemical Rocket Engine Control are broadly covered. The basic feedback information and control variables used in expendable and reusable rocket engines, such as Space Shuttle Main Engine, are discussed. The deficiencies of current approaches are considered and a brief introduction to Intelligent Control Systems for rocket engines (and vehicles) is presented.

Investigation of Remedial Education Course Scores as a Predictor of Introduction-Level Course Performances

ERIC Educational Resources Information Center

Ulmer, Ward; Means, Darris R.; Cawthon, Tony W.; Kristensen, Sheryl A.

2016-01-01

This study explores whether performance in remedial English and remedial math is a predictor of success in a college-level introduction English or college-level math class; and whether demographic variables increase the likelihood of remedial English and remedial math as a predictor of success in a college-level introduction English or…

Engineering Design Modules as Physics Teaching Tools

ERIC Educational Resources Information Center

Oliver, Douglas L.; Kane, Jackie

2011-01-01

Pre-engineering is increasingly being taught as a high school subject. This development presents challenges as well as opportunities for the physics education community. If pre-engineering is taught as a separate class, it may divert resources and students from traditional physics classes. However, design modules can be used as physics teaching…

40 CFR 1036.140 - Primary intended service class.

Code of Federal Regulations, 2014 CFR

2014-07-01

... POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE HEAVY-DUTY HIGHWAY ENGINES Emission Standards... vehicles for which you design and market the engine. The three primary intended service classes are light...) Light heavy-duty engines usually are not designed for rebuild and do not have cylinder liners. Vehicle...

40 CFR 1036.140 - Primary intended service class.

Code of Federal Regulations, 2013 CFR

2013-07-01

... POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE HEAVY-DUTY HIGHWAY ENGINES Emission Standards... vehicles for which you design and market the engine. The three primary intended service classes are light...) Light heavy-duty engines usually are not designed for rebuild and do not have cylinder liners. Vehicle...

40 CFR 1036.140 - Primary intended service class.

Code of Federal Regulations, 2012 CFR

2012-07-01

... POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE HEAVY-DUTY HIGHWAY ENGINES Emission Standards... vehicles for which you design and market the engine. The three primary intended service classes are light...) Light heavy-duty engines usually are not designed for rebuild and do not have cylinder liners. Vehicle...

14 CFR 34.1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... EXHAUST EMISSION REQUIREMENTS FOR TURBINE ENGINE POWERED AIRPLANES General Provisions § 34.1 Definitions... in, or which is manufactured for installation in, an aircraft. Aircraft gas turbine engine means a.... Class T3 means all aircraft gas turbine engines of the JT3D model family. Class T8 means all aircraft...

A review of nanostructured surfaces and materials for dental implants: surface coating, patterning and functionalization for improved performance.

PubMed

Rasouli, Rahimeh; Barhoum, Ahmed; Uludag, Hasan

2018-05-10

The emerging field of nanostructured implants has enormous scope in the areas of medical science and dental implants. Surface nanofeatures provide significant potential solutions to medical problems by the introduction of better biomaterials, improved implant design, and surface engineering techniques such as coating, patterning, functionalization and molecular grafting at the nanoscale. This review is of an interdisciplinary nature, addressing the history and development of dental implants and the emerging area of nanotechnology in dental implants. After a brief introduction to nanotechnology in dental implants and the main classes of dental implants, an overview of different types of nanomaterials (i.e. metals, metal oxides, ceramics, polymers and hydrides) used in dental implant together with their unique properties, the influence of elemental compositions, and surface morphologies and possible applications are presented from a chemical point of view. In the core of this review, the dental implant materials, physical and chemical fabrication techniques and the role of nanotechnology in achieving ideal dental implants have been discussed. Finally, the critical parameters in dental implant design and available data on the current dental implant surfaces that use nanotopography in clinical dentistry have been discussed.

Teaching Engineering Design Using Computer Workstations.

ERIC Educational Resources Information Center

Hodgson, J. M.

1988-01-01

Explains the use of computer workstations in Electronic Engineering and in Control and Computer Engineering. Provides an introduction; initial teaching exercises at the first year, second, and third year design, research and development; and conclusions. (YP)

AGARD Manual on Aeroelasticity in Axial-Flow Turbomachines. Volume 1. Unsteady Turbomachinery Aerodynamics

DTIC Science & Technology

1987-03-01

highly specialized unsteady aerodynamic and aeroelastic information to the turbomachinery design community and the introduction of young engineers to this...dynamics and aeroelas- ticity will be found useful as an introduction to this important special discipline and as a basis for future work. Max F...I. INTRODUCTION AND OVERVIEW F.Sisto, Stevens Institute of Technology Introduction

Impact of an Engineering Case Study in a High School Pre-Engineering Course

ERIC Educational Resources Information Center

Rutz, Eugene; Shafer, Michelle

2011-01-01

Students at an all-girls high school who were enrolled in an introduction to engineering course were presented an engineering case study to determine if the case study affected their attitudes toward engineering and their abilities to solve engineering problems. A case study on power plants was implemented during a unit on electrical engineering.…

CrossTalk: The Journal of Defense Software Engineering. Volume 18, Number 9

DTIC Science & Technology

2005-09-01

2004. 12. Humphrey , Watts . Introduction to the Personal Software Process SM. Addison- Wesley 1997. 13. Humphrey , Watts . Introduction to the Team...Personal Software ProcessSM (PSPSM)is a software development process orig- inated by Watts Humphrey at the Software Engineering Institute (SEI) in the...meets its commitments and bring a sense of control and predictability into an apparently chaotic project.u References 1. Humphrey , Watts . Coaching

Co-Optimization of Fuels & Engines: Misfueling Mitigation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sluder, C. Scott; Moriarty, Kristi; Jehlik, Forrest

This report examines diesel/gasoline misfueling, leaded/unleaded gasoline misfueling, E85/E15/E10 misfueling, and consumer selection of regular grade fuel over premium grade fuel in an effort to evaluate misfueling technologies that may be needed to support the introduction of vehicles optimized for a new fuel in the marketplace. This is one of a series of reports produced as a result of the Co-Optimization of Fuels & Engines (Co-Optima) project, a Department of Energy-sponsored multi-agency project to accelerate the introduction of affordable, scalable, and sustainable biofuels and high-efficiency, low-emission vehicle engines.

Venture Class Launch Services

NASA Technical Reports Server (NTRS)

Wiese, Mark

2016-01-01

Provide an introduction to the Launch Services Program, and specifically the strategic initiative that drove the Venture Class Launch Services contracts. Provide information from the VCLS request for proposals, as well as the Agency's CubeSat Launch Initiative.

40 CFR 86.1305-2010 - Introduction; structure of subpart.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Introduction; structure of subpart. 86... Exhaust Test Procedures § 86.1305-2010 Introduction; structure of subpart. (a) This subpart specifies the... use good engineering judgment when testing under this paragraph (h), and must comply with the...

14 CFR 21.21 - Issue of type certificate: normal, utility, acrobatic, commuter, and transport category aircraft...

Code of Federal Regulations, 2014 CFR

2014-01-01

...; aircraft engines; propellers. 21.21 Section 21.21 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION...; manned free balloons; special classes of aircraft; aircraft engines; propellers. An applicant is entitled... category, or for a manned free balloon, special class of aircraft, or an aircraft engine or propeller, if...

14 CFR 21.21 - Issue of type certificate: normal, utility, acrobatic, commuter, and transport category aircraft...

Code of Federal Regulations, 2010 CFR

2010-01-01

...; aircraft engines; propellers. 21.21 Section 21.21 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION...; manned free balloons; special classes of aircraft; aircraft engines; propellers. Link to an amendment..., special class of aircraft, or an aircraft engine or propeller, if— (a) The product qualifies under § 21.27...

14 CFR 21.21 - Issue of type certificate: normal, utility, acrobatic, commuter, and transport category aircraft...

Code of Federal Regulations, 2013 CFR

2013-01-01

...; aircraft engines; propellers. 21.21 Section 21.21 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION...; manned free balloons; special classes of aircraft; aircraft engines; propellers. An applicant is entitled... category, or for a manned free balloon, special class of aircraft, or an aircraft engine or propeller, if...

14 CFR 21.21 - Issue of type certificate: normal, utility, acrobatic, commuter, and transport category aircraft...

Code of Federal Regulations, 2012 CFR

2012-01-01

...; aircraft engines; propellers. 21.21 Section 21.21 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION...; manned free balloons; special classes of aircraft; aircraft engines; propellers. An applicant is entitled... category, or for a manned free balloon, special class of aircraft, or an aircraft engine or propeller, if...

40 CFR 87.31 - Standards for exhaust emissions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Gas Turbine Engines) § 87.31 Standards for exhaust emissions. (a) Exhaust emissions of smoke from each in-use aircraft gas turbine engine of Class T8, beginning February 1, 1974, shall not exceed: Smoke number of 30. (b) Exhaust emissions of smoke from each in-use aircraft gas turbine engine of class TF and...

40 CFR 87.31 - Standards for exhaust emissions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Gas Turbine Engines) § 87.31 Standards for exhaust emissions. (a) Exhaust emissions of smoke from each in-use aircraft gas turbine engine of Class T8, beginning February 1, 1974, shall not exceed: Smoke number of 30. (b) Exhaust emissions of smoke from each in-use aircraft gas turbine engine of class TF and...

40 CFR 87.31 - Standards for exhaust emissions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Gas Turbine Engines) § 87.31 Standards for exhaust emissions. (a) Exhaust emissions of smoke from each in-use aircraft gas turbine engine of Class T8, beginning February 1, 1974, shall not exceed: Smoke number of 30. (b) Exhaust emissions of smoke from each in-use aircraft gas turbine engine of class TF and...

40 CFR 87.31 - Standards for exhaust emissions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Gas Turbine Engines) § 87.31 Standards for exhaust emissions. (a) Exhaust emissions of smoke from each in-use aircraft gas turbine engine of Class T8, beginning February 1, 1974, shall not exceed: Smoke number of 30. (b) Exhaust emissions of smoke from each in-use aircraft gas turbine engine of class TF and...

40 CFR 87.31 - Standards for exhaust emissions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) Definitions. Exhaust Emissions (In-Use Aircraft Gas Turbine Engines) § 87.31 Standards for exhaust emissions. (a) Exhaust emissions of smoke from each in-use aircraft gas turbine engine of Class T8... in-use aircraft gas turbine engine of class TF and of rated output of 129 kilonewtons thrust or...

14 CFR 34.10 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-01-01

... In-Use Aircraft Gas Turbine Engines) § 34.10 Applicability. (a) The provisions of this subpart are applicable to all new aircraft gas turbine engines of classes T3, T8, TSS, and TF equal to or greater than 36... applicable to all new aircraft gas turbine engines of class TF less than 36 kilonewtons (8090 pounds) rated...

14 CFR 34.21 - Standards for exhaust emissions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... (New Aircraft Gas Turbine Engines) § 34.21 Standards for exhaust emissions. (a) Exhaust emissions of smoke from each new aircraft gas turbine engine of class T8 manufactured on or after February 1, 1974...) Exhaust emission of smoke from each new aircraft gas turbine engine of class T3 manufactured on or after...

14 CFR 34.21 - Standards for exhaust emissions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... (New Aircraft Gas Turbine Engines) § 34.21 Standards for exhaust emissions. (a) Exhaust emissions of smoke from each new aircraft gas turbine engine of class T8 manufactured on or after February 1, 1974...) Exhaust emission of smoke from each new aircraft gas turbine engine of class T3 manufactured on or after...

14 CFR 34.10 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-01-01

... In-Use Aircraft Gas Turbine Engines) § 34.10 Applicability. (a) The provisions of this subpart are applicable to all new aircraft gas turbine engines of classes T3, T8, TSS, and TF equal to or greater than 36... applicable to all new aircraft gas turbine engines of class TF less than 36 kilonewtons (8090 pounds) rated...

Hydrostatic Pressure Project: Linked-Class Problem-Based Learning in Engineering

ERIC Educational Resources Information Center

Davis, Freddie J.; Lockwood-Cooke, Pamela; Hunt, Emily M.

2011-01-01

Over the last few years, WTAMU Mathematics, Engineering and Science faculty has used interdisciplinary projects as the basis for implementation of a linked-class approach to Problem-Based Learning (PBL). A project that has significant relevance to engineering statics, fluid mechanics, and calculus is the Hydrostatic Pressure Project. This project…

Effect of a "Look-Ahead" Problem on Undergraduate Engineering Students' Concept Comprehension

ERIC Educational Resources Information Center

Goodman, Kevin; Davis, Julian; McDonald, Thomas

2016-01-01

In an effort to motivate undergraduate engineering students to prepare for class by reviewing material before lectures, a "Look-Ahead" problem was utilized. Students from two undergraduate engineering courses; Statics and Electronic Circuits, were assigned problems from course material that had not yet been covered in class. These…

Stationary Engineering. Science Manual--2.

ERIC Educational Resources Information Center

Frost, Harold J.; Steingress, Frederick M.

This second-year student manual contains 140 brief related science lessons applying science and math to trade activities in the field of stationary engineering. The lessons are organized into 16 units: (1) Introduction to Stationary Engineering, (2) Engineering Fundamentals, (3) Steam Boilers, (4) Boiler Fittings, (5) Boilerroom System, (6)…

Active Learning in Engineering Education: A (Re)Introduction

ERIC Educational Resources Information Center

Lima, Rui M.; Andersson, Pernille Hammar; Saalman, Elisabeth

2017-01-01

The informal network "Active Learning in Engineering Education" (ALE) has been promoting Active Learning since 2001. ALE creates opportunity for practitioners and researchers of engineering education to collaboratively learn how to foster learning of engineering students. The activities in ALE are centred on the vision that learners…

Radiation Engineering for Designers

NASA Technical Reports Server (NTRS)

Pellish, Jonathan A.

2015-01-01

This tutorial provides an overview of the natural space radiation environment, an introduction to radiation effect types, an overview of EEE parts selection, scrubbing, and radiation mitigation, and an introduction to radiation testing.

NACA Mechanics in an Allison Engine Training Class

NASA Image and Video Library

1943-10-21

The Allison Engine Company's A.G. Covell instructs mechanics from various divisions at the National Advisory Committee for Aeronautics (NACA) Aircraft Engine Research Laboratory on the operation of the Allison Basic Engine. The military had asked that the laboratory undertake an extensive program to improve the performance of the Allison V–1710 engine. The V–1710 was the only liquid-cooled engine used during World War II, and the military counted on it to power several types of fighter aircraft. The NACA instituted an Apprentice Program during the war to educate future mechanics, technicians, and electricians. The program was suspended for a number of years due to the increasing rates of military service by its participants. The laboratory continued its in-house education during the war, however, by offering a number of classes to its employees and lectures for the research staff. The classes and lectures were usually taught by fellow members of the staff, but occasionally external experts were brought in. The students in the Allison class in the Engine Research Building were taught how to completely disassemble and reassemble the engine components and systems. From left to right are Don Vining, Ed Cudlin, Gus DiNovo, George Larsen, Charles Diggs, Martin Lipes, Harley Roberts, Martin Berwaldt and John Dempsey. A.G. Covell is standing.

Can Technology Improve Large Class Learning? The Case of an Upper-Division Business Core Class

ERIC Educational Resources Information Center

Stanley, Denise

2013-01-01

Larger classes are often associated with lower student achievement. The author tested the hypothesis that the introduction of personal response systems significantly improves scores in a 250-seat classroom, through the channels of improved attendance and engagement. She focused on how continuous participation with the technology could change…

Introduction to Latent Class Analysis with Applications

ERIC Educational Resources Information Center

Porcu, Mariano; Giambona, Francesca

2017-01-01

Latent class analysis (LCA) is a statistical method used to group individuals (cases, units) into classes (categories) of an unobserved (latent) variable on the basis of the responses made on a set of nominal, ordinal, or continuous observed variables. In this article, we introduce LCA in order to demonstrate its usefulness to early adolescence…

Eustace Tilley Comes to Class

ERIC Educational Resources Information Center

Arin, Jennifer

2009-01-01

Of all the reasons to use "The New Yorker" in a college writing class, the most compelling may be that its articles go beyond--well beyond--the five-paragraph model. Why, oh why, did that paradigm become such a fixture in composition courses? Students in the author's writing classes invariably suppose they can compose a quick introduction, add…

Hinduism: A Unit for Junior High and Middle School Social Studies Classes.

ERIC Educational Resources Information Center

Galloway, Louis J.

As an introduction and explanation of the historical development, major concepts, beliefs, practices, and traditions of Hinduism, this teaching unit provides a course outline for class discussion and activities for reading the classic epic, "The Ramayana." The unit requires 10 class sessions and utilizes slides, historical readings,…

History of Significant Vehicle and Fuel Introductions in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shirk, Matthew; Alleman, Teresa; Melendez, Margo

This is one of a series of reports produced as a result of the Co-Optimization of Fuels & Engines (Co-Optima) project, a Department of Energy (DOE)-sponsored multi-agency project initiated to accelerate the introduction of affordable, scalable, and sustainable biofuels and high-efficiency, low-emission vehicle engines. The simultaneous fuels and vehicles research and development is designed to deliver maximum energy savings, emissions reduction, and on-road performance.

18 CFR 50.5 - Pre-filing procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... ELECTRIC TRANSMISSION FACILITIES § 50.5 Pre-filing procedures. (a) Introduction. Any applicant seeking a... consultations, project engineering, route planning, environmental and engineering contractor engagement... proceeding. This description also must include the identification of the environmental and engineering firms...

40 CFR 87.10 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... Engine Fuel Venting Emissions (New and In-Use Aircraft Gas Turbine Engines) § 87.10 Applicability. (a) The provisions of this subpart are applicable to all new aircraft gas turbines of classes T3, T8, TSS..., and to all in-use aircraft gas turbine engines of classes T3, T8, TSS and TF equal to or greater than...

Design Your Own Underwater Remotely Operated Vehicle (ROV)

ERIC Educational Resources Information Center

Lien, Brian

2009-01-01

While looking for labs for his pre-engineering class, the author came across an idea for a marine engineering project from the Future Scientists and Engineers of America website. The author thought the lab looked fun, and it was not too expensive. These were two important criteria as he chose labs for the class. Another important criteria he had…

The gate studies: Assessing the potential of future small general aviation turbine engines

NASA Technical Reports Server (NTRS)

Strack, W. C.

1979-01-01

Four studies were completed that explore the opportunities for future General Aviation turbine engines (GATE) in the 150-1000 SHP class. These studies forecasted the potential impact of advanced technology turbine engines in the post-1988 market, identified important aircraft and missions, desirable engine sizes, engine performance, and cost goals. Parametric evaluations of various engine cycles, configurations, design features, and advanced technology elements defined baseline conceptual engines for each of the important missions identified by the market analysis. Both fixed-wing and helicopter aircraft, and turboshaft, turboprop, and turbofan engines were considered. Sizable performance gains (e.g., 20% SFC decrease), and large engine cost reductions of sufficient magnitude to challenge the reciprocating engine in the 300-500 SHP class were predicted.

Microprocessors in Systems Engineering at the U.S. Naval Academy.

ERIC Educational Resources Information Center

Mitchell, Eugene E., Ed.; Lowe, W. M., Ed.

1982-01-01

Describes the introduction of microprocessors into the Weapons and Systems Engineering Department at the U.S. Naval Academy, including planning decisions, implementation, procedures, uses of microprocessors in the department, and impact on the Systems Engineering major and curriculum. (SK)

78 FR 44199 - Semiannual Regulatory Agenda, Spring 2013

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-23

..., interstate movement, and environmental release of certain genetically engineered organisms. This rule will... genetically engineered plants and certain other genetically engineered organisms. Timetable: Action Date FR... Citrus Canker; 0579-AC05 Compensation for Certified Citrus Nursery Stock. 17 Introduction of Organisms...

Dissolution of Monocrystalline Silicon Nanomembranes and Their Use as Encapsulation Layers and Electrical Interfaces in Water-Soluble Electronics.

PubMed

Lee, Yoon Kyeung; Yu, Ki Jun; Song, Enming; Barati Farimani, Amir; Vitale, Flavia; Xie, Zhaoqian; Yoon, Younghee; Kim, Yerim; Richardson, Andrew; Luan, Haiwen; Wu, Yixin; Xie, Xu; Lucas, Timothy H; Crawford, Kaitlyn; Mei, Yongfeng; Feng, Xue; Huang, Yonggang; Litt, Brian; Aluru, Narayana R; Yin, Lan; Rogers, John A

2017-12-26

The chemistry that governs the dissolution of device-grade, monocrystalline silicon nanomembranes into benign end products by hydrolysis serves as the foundation for fully eco/biodegradable classes of high-performance electronics. This paper examines these processes in aqueous solutions with chemical compositions relevant to groundwater and biofluids. The results show that the presence of Si(OH) 4 and proteins in these solutions can slow the rates of dissolution and that ion-specific effects associated with Ca 2+ can significantly increase these rates. This information allows for effective use of silicon nanomembranes not only as active layers in eco/biodegradable electronics but also as water barriers capable of providing perfect encapsulation until their disappearance by dissolution. The time scales for this encapsulation can be controlled by introduction of dopants into the Si and by addition of oxide layers on the exposed surfaces.The former possibility also allows the doped silicon to serve as an electrical interface for measuring biopotentials, as demonstrated in fully bioresorbable platforms for in vivo neural recordings. This collection of findings is important for further engineering development of water-soluble classes of silicon electronics.

Working-Class Women in the Academy: Laborers in the Knowledge Factory.

ERIC Educational Resources Information Center

Tokarczyk, Michelle M., Ed.; Fay, Elizabeth A., Ed.

This volume contains a collection of essays on the issues and concerns that face women from working-class backgrounds who enter academic careers. Following an introduction and transcript of a dialogue between Kate Ellis and Lillain S. Robinson, the essays are as follows: "What's a Nice Working-Class Girl Like You Doing in a Place Like…

Integrating Research Methods into Substantive Courses: A Class Project to Identify Social Backgrounds of Political Elites.

ERIC Educational Resources Information Center

Johnson, Margaret A.; Steward, Gary Jr.

1997-01-01

Reports on a class project that combined an examination of social class and political power with an introduction to sociological research. The project consisted of compiling biographical profiles of cabinet members from the Ronald Reagan, George Bush, and Bill Clinton administrations. Introduces students to issues of conceptualization,…

Very Long Term Oxidation of Ti-48Al-2Cr-2Nb at 704 C In Air

NASA Technical Reports Server (NTRS)

Locci, I. E.; Brady, M. P.; MacKay, R. A.; Smith, J. W.

1997-01-01

Introduction Titanium aluminides are of great interest for intermediate-temperature (600 C - 850 C) aerospace and power generation applications because of their high specific properties. Replacement of conventional superalloys by titanium aluminides offers the potential of significant weight savings. Extensive development efforts over the past IO years have led to the identification of y (TiAl) + alpha(sub 2) (Ti3Al) alloys, such as the G.E. alloy Ti48Al-2Cr-2Nb (all composition in at. %), which offer a balance of room temperature mechanical properties and high-temperature strength retention. The two phase gamma + alpha(sub 2) class of titanium aluminides also offers superior oxidation and embrittlement resistance compared to the alpha(sub 2) and orthorhombic classes of titanium aluminides. However, environmental durability is still a major concern. Significant progress has recently been made in understanding the fundamental aspects of the oxidation behavior of binary gamma + alpha(sub 2) Ti-Al alloys. However, most of this work has concentrated on short term (less than 1000 hours), high temperature (900 C - 1000 C) exposures. Also little data are available in the literature regarding the oxidation behavior of the quaternary and higher order gamma + alpha(sub 2) engineering alloys. This is especially true for the very long-term, low temperature conditions likely to be experienced during engineering applications. The present work addresses this regime to fill this gap by characterizing the oxidation behavior of Ti48Al-2Cr-2Nb for periods up to 9000 h at 704 C in air.

MX Resident Engineer Networking Guide.

DTIC Science & Technology

1982-04-01

FIGURES 6 INTRODUCTION ............................................................ 11 Background Approach Purpose Scope 2 SYSTEM OVERVIEW...RESIDENT ENGINEER NETWORKING GUIDE 1 INTRODUCTION Background The Network Analysis System (NAS) is not a new planning method. It has been used for more than...DEVELOPMENT RUN DATE 19MAY7’ 2359MRS S U M M A R I P A Y N L N T S S T A I I M E N I PROJECT START jAUG ?? PROJECT EXR 4 L1 SAMPLE PNOPLEM *ACTIVITT-YN

Expedient Gap Definition Using 3D LADAR

DTIC Science & Technology

2006-09-01

Research and Development Center (ERDC), ASI has developed an algorithm to reduce the 3D point cloud acquired with the LADAR system into sets of 2D...ATO IV.GC.2004.02. The GAP Program is conducted by the U.S. Army Engineer Research and Development Center (ERDC) in conjunction with the U.S. Army...Introduction 1 1 Introduction Background The Battlespace Gap Definition and Defeat ( GAP ) Program is conducted by the U.S. Army Engineer Research and

Results of Summer Enrichment Program to Promote High School Students' Interest in Engineering

ERIC Educational Resources Information Center

Hart, Brenda; McAnulty, Kate

2014-01-01

For more than thirty years, personnel from the University of Louisville J.B. Speed School of Engineering have presented a summer program targeting high school students historically underrepresented in engineering fields. INSPIRE provides these students with an introduction to careers in engineering and assists the students in planning their…

Engineering Education at a New Public University in Brazil: First Students' Contact with Engineering Methods

ERIC Educational Resources Information Center

Romero, Jesus Franklin A.; Leite, Patricia; Mantovani, Gerson L.; Lanfredi, Alexandre J. C.; Martins-Filho, Luiz S.

2011-01-01

This paper describes the experience of an introductory discipline to the engineering curricula at the Brazilian Federal University of ABC (UFABC). The university offers a common basic curriculum that must be accomplished by every student and can be followed by professionalising courses. The discipline "Introduction to Engineering"…

The Effectiveness of Web Search Engines to Index New Sites from Different Countries

ERIC Educational Resources Information Center

Pirkola, Ari

2009-01-01

Introduction: Investigates how effectively Web search engines index new sites from different countries. The primary interest is whether new sites are indexed equally or whether search engines are biased towards certain countries. If major search engines show biased coverage it can be considered a significant economic and political problem because…

Engineered Coatings Inc.; Proposed Settlement of Clean Water Act Class I Administrative Penalty and Opportunity to Comment

EPA Pesticide Factsheets

Public Notice of Proposed Settlement of Clean Water Act Class I Administrative Penalty and Opportunity to Comment In the Matter of Engineered Coatings Inc., 3154 Harcourt Street, Compton, California, 90221.

75 FR 13313 - Advisory Committee for International Science and Engineering; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-19

... NATIONAL SCIENCE FOUNDATION Advisory Committee for International Science and Engineering; Notice... Science and Engineering ( 25104). Date/Time: April 19, 2010--8:30 a.m. to 5 p.m. April 20, 2010--8:30 a.m... Engineering. Agenda April 19, 2010 AM: Introductions and Updates--Presentation and Discussion of 2010...

Introduction to NEPA and mitigation for TxDOT PDP : workshop material.

DOT National Transportation Integrated Search

2014-10-01

The purpose of this workshop is to provide transportation planners, engineers, : environmental practitioners, and local officials with an introduction to National : Environemntal policy Act (EPA), mitigation, and the project development : process (PD...

Training order and structural location of meaningful stimuli: effects on equivalence class formation.

PubMed

Nartey, Richard K; Arntzen, Erik; Fields, Lanny

2015-12-01

In the present study, equivalence class formation was influenced by the temporal point of inclusion of a meaningful stimulus when baseline relations were serially or sequentially trained, and much less so by the location of the meaningful stimulus in the nodal structure of the class. In Experiment 1, participants attempted to form three 3-node, 5-member classes (A→B→C→D→E) under the simultaneous protocol. After serially training the baseline relations AB, BC, CD, and DE, in that order, the emergence of all emergent relations was tested concurrently. In the A-as-PIC condition, A was meaningful stimulus and B to E were meaningless stimulus, and 60 % of the participants formed classes. In addition, classes were formed by 40 %, 70 %, 40 %, and 20 % of the participants in the B-as-PIC, C-as-PIC, D-as-PIC, and E-as-PIC groups, respectively. Thus, the likelihood of class formation could have been influenced by the location of a meaningful stimulus in the class structure and/or by its order of introduction during training. In Experiment 2, we controlled for any effect of order of introduction by the concurrent training of all of the baseline relations. Regardless of the location of the meaningful stimulus, 0-20 % of participants formed classes. Thus, the temporal order of introducing a meaningful stimulus was the primary modulator of the class-enhancing property of meaningful stimuli, and not the location of the meaningful stimulus in the class structure.

Steps towards the synthetic biology of polyketide biosynthesis.

PubMed

Cummings, Matthew; Breitling, Rainer; Takano, Eriko

2014-02-01

Nature is providing a bountiful pool of valuable secondary metabolites, many of which possess therapeutic properties. However, the discovery of new bioactive secondary metabolites is slowing down, at a time when the rise of multidrug-resistant pathogens and the realization of acute and long-term side effects of widely used drugs lead to an urgent need for new therapeutic agents. Approaches such as synthetic biology are promising to deliver a much-needed boost to secondary metabolite drug development through plug-and-play optimized hosts and refactoring novel or cryptic bacterial gene clusters. Here, we discuss this prospect focusing on one comprehensively studied class of clinically relevant bioactive molecules, the polyketides. Extensive efforts towards optimization and derivatization of compounds via combinatorial biosynthesis and classical engineering have elucidated the modularity, flexibility and promiscuity of polyketide biosynthetic enzymes. Hence, a synthetic biology approach can build upon a solid basis of guidelines and principles, while providing a new perspective towards the discovery and generation of novel and new-to-nature compounds. We discuss the lessons learned from the classical engineering of polyketide synthases and indicate their importance when attempting to engineer biosynthetic pathways using synthetic biology approaches for the introduction of novelty and overexpression of products in a controllable manner. © 2013 The Authors FEMS Microbiology Letters published by John Wiley & Sons Ltd on behalf of Federation of European Microbiological Societies.

Synthesis of Engineered Zeolitic Materials: From Classical Zeolites to Hierarchical Core-Shell Materials.

PubMed

Masoumifard, Nima; Guillet-Nicolas, Rémy; Kleitz, Freddy

2018-04-01

The term "engineered zeolitic materials" refers to a class of materials with a rationally designed pore system and active-sites distribution. They are primarily made of crystalline microporous zeolites as the main building blocks, which can be accompanied by other secondary components to form composite materials. These materials are of potential importance in many industrial fields like catalysis or selective adsorption. Herein, critical aspects related to the synthesis and modification of such materials are discussed. The first section provides a short introduction on classical zeolite structures and properties, and their conventional synthesis methods. Then, the motivating rationale behind the growing demand for structural alteration of these zeolitic materials is discussed, with an emphasis on the ongoing struggles regarding mass-transfer issues. The state-of-the-art techniques that are currently available for overcoming these hurdles are reviewed. Following this, the focus is set on core-shell composites as one of the promising pathways toward the creation of a new generation of highly versatile and efficient engineered zeolitic substances. The synthesis approaches developed thus far to make zeolitic core-shell materials and their analogues, yolk-shell, and hollow materials, are also examined and summarized. Finally, the last section concisely reviews the performance of novel core-shell, yolk-shell, and hollow zeolitic materials for some important industrial applications. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Artificial Intelligence Is for Real: Undergraduate Students Should Know about It.

ERIC Educational Resources Information Center

Liebowitz, Jay

1988-01-01

Discussion of the possibilities of introducing artificial intelligence (AI) into the undergraduate curriculum highlights the introduction of AI in an introduction to information processing course for business students at George Washington University. Topics discussed include robotics, expert systems prototyping in class, and the interdisciplinary…

Inverse Opal Scaffolds and Their Biomedical Applications.

PubMed

Zhang, Yu Shrike; Zhu, Chunlei; Xia, Younan

2017-09-01

Three-dimensional porous scaffolds play a pivotal role in tissue engineering and regenerative medicine by functioning as biomimetic substrates to manipulate cellular behaviors. While many techniques have been developed to fabricate porous scaffolds, most of them rely on stochastic processes that typically result in scaffolds with pores uncontrolled in terms of size, structure, and interconnectivity, greatly limiting their use in tissue regeneration. Inverse opal scaffolds, in contrast, possess uniform pores inheriting from the template comprised of a closely packed lattice of monodispersed microspheres. The key parameters of such scaffolds, including architecture, pore structure, porosity, and interconnectivity, can all be made uniform across the same sample and among different samples. In conjunction with a tight control over pore sizes, inverse opal scaffolds have found widespread use in biomedical applications. In this review, we provide a detailed discussion on this new class of advanced materials. After a brief introduction to their history and fabrication, we highlight the unique advantages of inverse opal scaffolds over their non-uniform counterparts. We then showcase their broad applications in tissue engineering and regenerative medicine, followed by a summary and perspective on future directions. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Technologies of polytechnic education in global benchmark higher education institutions

NASA Astrophysics Data System (ADS)

Kurushina, V. A.; Kurushina, E. V.; Zemenkova, M. Y.

2018-05-01

The Russian polytechnic education is going through the sequence of transformations started with introduction of bachelor and master degrees in the higher education instead of the previous “specialists”. The next stage of reformation in the Russian polytechnic education should imply the growth in quality of teaching and learning experience that is possible to achieve by accumulating the best education practices of the world-class universities using the benchmarking method. This paper gives an overview of some major distinctive features of the foreign benchmark higher education institution and the Russian university of polytechnic profile. The parameters that allowed the authors to select the foreign institution for comparison include the scope of educational profile, industrial specialization, connections with the leading regional corporations, size of the city and number of students. When considering the possibilities of using relevant higher education practices of the world level, the authors emphasize the importance of formation of a new mentality of an engineer, the role of computer technologies in engineering education, the provision of licensed software for the educational process which exceeds the level of a regional Russian university, and successful staff technologies (e.g., inviting “guest” lecturers or having 2-3 lecturers per course).

Engineering the future with America's high school students

NASA Technical Reports Server (NTRS)

Farrance, M. A.; Jenner, J. W.

1993-01-01

The number of students enrolled in engineering is declining while the need for engineers is increasing. One contributing factor is that most high school students have little or no knowledge about what engineering is, or what engineers do. To teach young students about engineering, engineers need good tools. This paper presents a course of study developed and used by the authors in a junior college course for high school students. Students learned about engineering through independent student projects, in-class problem solving, and use of career information resources. Selected activities from the course can be adapted to teach students about engineering in other settings. Among the most successful techniques were the student research paper assignments, working out a solution to an engineering problem as a class exercise, and the use of technical materials to illustrate engineering concepts and demonstrate 'tools of the trade'.

How to Teach Engineering and Industrial Design: a U.K. Experience.

ERIC Educational Resources Information Center

Sheldon, D. F.

1988-01-01

Explored are the possibilities of teaching engineering through a project approach. Discussed are the introduction, clashing cultures of industrial and engineering design, skills required of a designer, teaching approach to the total design activity, CAD/CAM experiences, and conclusions. (Author/YP)

A Program on Biochemical and Biomedical Engineering.

ERIC Educational Resources Information Center

San, Ka-Yiu; McIntire, Larry V.

1989-01-01

Presents an introduction to the Biochemical and Biomedical Engineering program at Rice University. Describes the development of the academic and enhancement programs, including organizational structure and research project titles. (YP)

40 CFR 87.60 - Introduction.

Code of Federal Regulations, 2012 CFR

2012-07-01

... emission standard. For turboprop engines, use the procedures specified for turbofan engines, consistent... § 87.60—LTO Test Cycles Mode Turboprop Percent of rated output Time in mode(minutes) Subsonic turbofan...

Advanced Subsonic Airplane Design and Economic Studies

NASA Technical Reports Server (NTRS)

Liebeck, Robert H.; Andrastek, Donald A.; Chau, Johnny; Girvin, Raquel; Lyon, Roger; Rawdon, Blaine K.; Scott, Paul W.; Wright, Robert A.

1995-01-01

A study was made to examine the effect of advanced technology engines on the performance of subsonic airplanes and provide a vision of the potential which these advanced engines offered. The year 2005 was selected as the entry-into-service (EIS) date for engine/airframe combination. A set of four airplane classes (passenger and design range combinations) that were envisioned to span the needs for the 2005 EIS period were defined. The airframes for all classes were designed and sized using 2005 EIS advanced technology. Two airplanes were designed and sized for each class: one using current technology (1995) engines to provide a baseline, and one using advanced technology (2005) engines. The resulting engine/airframe combinations were compared and evaluated on the basis on sensitivity to basic engine performance parameters (e.g. SFC and engine weight) as well as DOC+I. The advanced technology engines provided significant reductions in fuel burn, weight, and wing area. Average values were as follows: reduction in fuel burn = 18%, reduction in wing area = 7%, and reduction in TOGW = 9%. Average DOC+I reduction was 3.5% using the pricing model based on payload-range index and 5% using the pricing model based on airframe weight. Noise and emissions were not considered.

Education and Learning Improvement by Introduction of an Evaluation System to Graduation Research Work

NASA Astrophysics Data System (ADS)

Kuba, Takahiro; Yasufuku, Noriyuki

A new evaluation system was introduced to the graduation research in the Civil Engineering Course, Department of Earth Resources, Marine and Civil Engineering, Kyushu University. The purpose of the graduation research was also specified, and it was shared by all the students and the educators in the course. Consequently, the introduction of the system apparently led to education improvement for the educators, as well as learning improvement for the students, e.g., their presentation ability and communications skills have improved.

The Physics and Chemistry of Materials

NASA Astrophysics Data System (ADS)

Gersten, Joel I.; Smith, Frederick W.

2001-06-01

A comprehensive introduction to the structure, properties, and applications of materials This title provides the first unified treatment for the broad subject of materials. Authors Gersten and Smith use a fundamental approach to define the structure and properties of a wide range of solids on the basis of the local chemical bonding and atomic order present in the material. Emphasizing the physical and chemical origins of material properties, the book focuses on the most technologically important materials being utilized and developed by scientists and engineers. Appropriate for use in advanced materials courses, The Physics and Chemistry of Materials provides the background information necessary to assimilate the current academic and patent literature on materials and their applications. Problem sets, illustrations, and helpful tables complete this well-rounded new treatment. Five sections cover these important topics: * Structure of materials, including crystal structure, bonding in solids, diffraction and the reciprocal lattice, and order and disorder in solids * Physical properties of materials, including electrical, thermal, optical, magnetic, and mechanical properties * Classes of materials, including semiconductors, superconductors, magnetic materials, and optical materials in addition to metals, ceramics, polymers, dielectrics, and ferroelectrics * A section on surfaces, thin films, interfaces, and multilayers discusses the effects of spatial discontinuities in the physical and chemical structure of materials * A section on synthesis and processing examines the effects of synthesis on the structure and properties of various materials This book is enhanced by a Web-based supplement that offers advanced material together with an entire electronic chapter on the characterization of materials. The Physics and Chemistry of Materials is a complete introduction to the structure and properties of materials for students and an excellent reference for scientists and engineers.

"Encouragement of Sound Education amongst the Industrial Classes:" Mechanics' Institutes and Working-Class Membership 1838-1881

ERIC Educational Resources Information Center

Walker, Martyn

2013-01-01

Historians and educationalists have often assumed that working-class adult education emerged at the beginning of the twentieth century with the introduction of state-funded technical colleges. This was not the case. In 1823, the Glasgow Mechanics' Institute was opened and within a few years similar institutions were being established across the…

An Introduction to Multitasking and Texting: Prevalence and Impact on Grades and GPA in Marketing Classes

ERIC Educational Resources Information Center

Clayson, Dennis E.; Haley, Debra A.

2013-01-01

This exploratory study looks at the phenomena of texting in a marketing education context. It outlines the difficulties of multitasking within two metacognitive models of learning and sets the stage for further research on the effects of texting within class. Students in marketing classes in two different universities were surveyed. They received…

Teaching SSE and Some of Its Applications in Junior High School.

ERIC Educational Resources Information Center

Bernard, John E.

This paper describes the development of curriculum materials for teaching the Sum of Squared Errors (SSE) to one class of 25 eighth graders in Hawaii. Microcomputers were used in class. Prior to explicit introduction of the SSE students were given repeated contact with a data base of various statistics collected from members of their class. Then a…

What Predicts Student Success in Introductory Data Management Classes? An Investigation of Demographic, Personality, Computer-Related, and Interaction Variables

ERIC Educational Resources Information Center

Harris, Kenneth J.; Harris, Ranida B.; Lambert, Alysa D.

2011-01-01

Introduction to data management classes are often times students' first exposure to advanced material in these areas. Many factors are likely to influence success in these classes, but empirical investigations have focused on relatively few variables. In this study, we extend this research by examining the relative contributions of the previously…

The Effect of STEM Learning through the Project of Designing Boat Model toward Student STEM Literacy

NASA Astrophysics Data System (ADS)

Tati, T.; Firman, H.; Riandi, R.

2017-09-01

STEM Learning focusses on development of STEM-literate society, the research about implementation of STEM learning to develope students’ STEM literacy is still limited. This study is aimed to examine the effect of implementation STEM learning through the project of designing boat model on students STEM literacy in energy topic. The method of this study was a quasi-experiment with non-randomized pretest-posttest control group design. There were two classes involved, the experiment class used Project Based Learning with STEM approach and control class used Project-Based Learning without STEM approach. A STEM Literacy test instrument was developed to measure students STEM literacy which consists of science literacy, mathematics literacy, and technology-engineering literacy. The analysis showed that there were significant differences on improvement science literacy, mathematics technology-engineering between experiment class and control class with effect size more than 0.8 (large effect). The difference of improvement of STEM literacy between experiment class and control class is caused by the existence of design engineering activity which required students to apply the knowledge from every field of STEM. The challenge that was faced in STEM learning through design engineering activity was how to give the students practice to integrate STEM field in solving the problems. In additional, most of the students gave positive response toward implementation of STEM learning through design boat model project.

Introduction to Engineering. Course I: Challenges of Engineering. Course II: Engineering Projects.

ERIC Educational Resources Information Center

Barrier, Lynn P.

This guide, which is designed to be used in a two-course sequence, is intended to prepare college-bound high school juniors and seniors for engineering and related courses at the college level. The guide was developed as part of an experimental competency-based curriculum that integrates the high-tech applications of mathematics and science…

The Science of Solubility: Using Reverse Engineering to Brew a Perfect Cup of Coffee

ERIC Educational Resources Information Center

West, Andrew B.; Sickel, Aaron J.; Cribbs, Jennifer D.

2015-01-01

The Next Generation Science Standards call for the integration of science and engineering. Often, the introduction of engineering activities occurs after instruction in the science content. That is, engineering is used as a way for students to elaborate on science ideas that have already been explored. However, using only this sequence of…

Assessment of an Engineering Technology Outreach Program for 4th-7th Grade Girls

ERIC Educational Resources Information Center

Dell, Elizabeth M.; Christman, Jeanne; Garrick, Robert D.

2011-01-01

This paper describes a workshop led by female Engineering Technology students, with support from female faculty, to provide an introduction to Engineering Technology to 4th-7th grade girls through a series of interactive laboratory experiments. This outreach program was developed to improve attitudes towards science and engineering in middle…

Data management in engineering

NASA Technical Reports Server (NTRS)

Browne, J. C.

1976-01-01

An introduction to computer based data management is presented with an orientation toward the needs of engineering application. The characteristics and structure of data management systems are discussed. A link to familiar engineering applications of computing is established through a discussion of data structure and data access procedures. An example data management system for a hypothetical engineering application is presented.

A Project-Based Engineering and Leadership Workshop for High School Students

ERIC Educational Resources Information Center

Ryder, Linda Sue; Pegg, Jerine; Wood, Nathan

2012-01-01

Summer outreach programs provide pre-college participants an introduction to college life and exposure to engineering in an effort to raise the level of interest and bring more students into engineering fields. The Junior Engineering, Mathematics, and Science (JEMS) program is a project-based summer workshop in which teams of high school students…

Integral Engine Inlet Particle Separator. Volume 1. Technology Program

DTIC Science & Technology

1975-07-01

inlet particle separators for future Army aircraft gas turbine engines . Appropriate technical personnel of this Directorate have reviewed this report...USAAMRDL-TR-75-31A I - / INTEGRAL ENGINE INLET PARTICLE SEPARATOR Volume I-- Technology Program General Electric Company Aircraft Engine Group...N1 i 9ap mm tm~qu INTRODUCTION The adverse environments in which Army equipment operates impose severe )enalties upon gas turbine engine performance

Robustness of magnetic and electric domains against charge carrier doping in multiferroic hexagonal ErMnO 3

DOE PAGES

Hassanpour, E.; Wegmayr, V.; Schaab, J.; ...

2016-04-12

We investigate the effect of chemical doping on the electric and magnetic domain pattern in multiferroic hexagonal ErMnO 3 . Hole- and electron doping are achieved through the growth of Er 1-x Ca x MnO 3 and Er 1-x Zr x MnO 3 single crystals, which allows for a controlled introduction of divalent and tetravalent ions, respectively. Using conductance measurements, piezoresponse force microscopy and nonlinear optics we study doping-related variations in the electronic transport and image the corrsponding ferroelectric and antiferromagnetic domains. We find that moderate doping levels allow for adjusting the electronic conduction properties of ErMnO 3 without destroyingmore » its characteristic domain patterns. Our findings demonstrate the feasibility of chemical doping for nonperturbative property-engineering of intrinsic domain states in this important class of multiferroics.« less

Black Officer Accession and Retention

DTIC Science & Technology

1980-05-15

of Historically Black educational institutions. FACT. Provided for information at inclosure 1 is correspondence frcm HQ DA outlining the...CHAPTER I. INTRODUCTION ............... ....................... 1 Background Information ...INTRODUCTION BACKGROUND INFORMATION A gro’np of black students from the US Army War College Class of 󈨓, reached the conclusion that black officers were

Mathematical Education of Engineers.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France).

The seminar reported in this document examined the university mathematics courses which should be available to future engineers, and was especially concerned with the introduction of computer science education. There are four major sections. The first reports a survey of electrical engineers in the United Kingdom which investigated how often they…

Tailoring of EIA-649-1: Definition of Major (Class I) Engineering Change Proposal

DTIC Science & Technology

2015-05-15

MISSILE SYSTEMS CENTER TAILORING TAILORING OF EIA -649-1: DEFINITION OF MAJOR (CLASS I) ENGINEERING CHANGE PROPOSAL APPROVED FOR...PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED 1 Tailoring of EIA -649-1: Definition of Major (Class I) ECP. 1. Intent of this Tailoring Document...This tailoring document remedies a requirements gap in the industry consensus standard, EIA -649-1: 2015. Specifically, this tailoring provides a

78 FR 63971 - Draft Supplemental Environmental Impact Statement for the Introduction of the P-8A Multi-Mission...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-25

... the Introduction of the P-8A Multi-Mission Maritime Aircraft Into the U.S. Navy Fleet; Rescheduling of... Environmental Impact Statement (SEIS) for the Introduction of the P-8A Multi-Mission Maritime Aircraft into the... to December 2, 2013. FOR FURTHER INFORMATION CONTACT: Naval Facilities Engineering Command Atlantic...

Energy Optimization Audit at Humphreys Engineer Center

DTIC Science & Technology

2008-09-01

EPDM (ethylene propylene diene M- class [ rubber ]). Doors There are three pairs of doors to the interior terrace (Figure 6) and exit with a high...System EISA Energy Independence and Security Act EPAct Energy Policy Act EPDM EPDM (ethylene propylene diene M-class [ rubber ]) ERDC Engineer

From Assumption of Knowledge to Knowledgeable Considerations: a Class Activity on 'Ionizing Radiation' and Its Biological Effects.

ERIC Educational Resources Information Center

Ronen, Miky; Ganiel, Uri

1988-01-01

Describes a class activity, a game called "Beware--Radiation," developed as a framework for the introduction of the topic of radiation. Reports that both students and teachers had similar and mostly wrong preconceptions. (Author/YP)

Stunden-abstract (Class-Hour Plan)

ERIC Educational Resources Information Center

Hohmann, Heinz-Otto

1977-01-01

Offers a class-hour plan for Grade 11 on the theme of "James Thurber, 'The Peacelike Mongoose' - Discussion of Text," dividing the treatment into stages: Introduction and Reading, Text Elucidation, Comprehension Check, Summarizing Content, Reflection, Written Homework. Possible alternative approaches are discussed. (Text is in German.)…

A Case Study of Engineering Ethics

NASA Astrophysics Data System (ADS)

Shimizu, Kazuo

In Engineering Ethics Class at Shizuoka University, the Code of Ethics and Cases for Electrical Engineers by IEEJ Ethics committee is used to promote for high education effect to correspond large number of students (140students). In this paper, a case study in the class, and survey results for ethics value of students are presented. In addition, some comments for role playing act on the case of virtual experiences by students are described.

40 CFR 86.1505 - Introduction; structure of subpart.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations for Otto-Cycle Heavy-Duty Engines, New Methanol-Fueled Natural Gas-Fueled, and Liquefied Petroleum Gas-Fueled Diesel-Cycle Heavy-Duty Engines, New Otto-Cycle Light-Duty Trucks, and New Methanol-Fueled...

Russian Engineering Education in the Era of Change

ERIC Educational Resources Information Center

Vladimirovich Pukharenko, Yurii; Vladimirovna Norina, Natalia; Aleksandrovich Norin, Veniamin

2017-01-01

The article investigates modern issues of engineering education in Russia related to introduction of the Bologna system. The author shows that the situation in the education in general gives reasons for concern; the issue of qualitative enrolment of students for engineering specialties escalates; graduates with masters and bachelors' degrees are…

Introduction of Sustainability Concepts into Industrial Engineering Education: A Modular Approach

ERIC Educational Resources Information Center

Nazzal, Dima; Zabinski, Joseph; Hugar, Alexander; Reinhart, Debra; Karwowski, Waldemar; Madani, Kaveh

2015-01-01

Sustainability in operations, production, and consumption continues to gain relevance for engineers. This trend will accelerate as demand for goods and services grows, straining resources and requiring ingenuity to replace boundless supply in meeting the needs of a more crowded, more prosperous world. Industrial engineers are uniquely positioned…

Career Access Models: The Philadelphia Minorities in Engineering Consortium.

ERIC Educational Resources Information Center

McLaughlin, W. Barry

The Philadelphia Regional Introduction for Minorities to Engineering (PRIME) program, a nonprofit consortium of colleges, public schools, business/industry, government, and community agencies, is described. The pre-engineering program begins in the seventh grade and continues to track students through their college years. At the middle schools,…

76 FR 37771 - Monsanto Co.; Availability of Petition, Plant Pest Risk Assessment, and Environmental Assessment...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-28

... Determination of Nonregulated Status for Soybean Genetically Engineered To Have a Modified Fatty Acid Profile... soybean designated as MON 87705, which has been genetically engineered to have a modified fatty acid... our regulations concerning the introduction of certain genetically engineered organisms and products...

The Essence of Language Is History: A Theoretical Introduction to the Connection between Social Relations and Language Relations in 19th Century Brussels.

ERIC Educational Resources Information Center

de Metsenaere, Machteld

An examination of language use in 19th century Brussels seeks to explain how and why a link between language and social class came into operation. Hypotheses relating the social characteristics (material circumstances and consciousness) of social classes and segments of social classes to various resulting language patterns are proposed. This…

When in Rome, Do as Jon Stewart Does: Using "America--The Book" as a Textbook for Introductory-Level Classes in American Politics

ERIC Educational Resources Information Center

Teten, Ryan Lee

2010-01-01

This article draws from different experiences in teaching Introduction to American Politics classes over a six-year period. It examines the value of using nontraditional texts in introductory political science classes that may also fulfill general education requirements, in order to engage as many students as possible in the subject matter. It…

Interactive training model of TRIZ for mechanical engineers in China

NASA Astrophysics Data System (ADS)

Tan, Runhua; Zhang, Huangao

2014-03-01

Innovation is a process of taking an original idea and converting it into a business value, in which the engineers face some inventive problems which can be solved hardly by experience. TRIZ, as a new theory for companies in China, provides both conceptual and procedural knowledge for finding and solving inventive problems. Because the government plays a leading role in the diffusion of TRIZ, too many companies from different industries are waiting to be trained, but the quantity of the trainers mastering TRIZ is incompatible with that requirement. In this context, to improve the training effect, an interactive training model of TRIZ for the mechanical engineers in China is developed and the implementation in the form of training classes is carried out. The training process is divided into 6 phases as follows: selecting engineers, training stage-1, finding problems, training stage-2, finding solutions and summing up. The government, TRIZ institutions and companies to join the programs interact during the process. The government initiates and monitors a project in form of a training class of TRIZ and selects companies to join the programs. Each selected companies choose a few engineers to join the class and supervises the training result. The TRIZ institutions design the training courses and carry out training curriculum. With the beginning of the class, an effective communication channel is established by means of interview, discussion face to face, E-mail, QQ and so on. After two years training practices, the results show that innovative abilities of the engineers to join and pass the final examinations increased distinctly, and most of companies joined the training class have taken congnizance of the power of TRIZ for product innovation. This research proposes an interactive training model of TRIZ for mechanical engineers in China to expedite the knowledge diffusion of TRIZ.

Shrinking Your Class

ERIC Educational Resources Information Center

Herron-Thorpe, Farren L.; Olson, Jo Clay; Davis, Denny

2010-01-01

Toys in the classroom was the result of a National Science Foundation grant that brought two engineering graduate students to a middle school math class. The graduate students and teachers collaborated in an effort to enhance students' mathematical learning. An engineering context was theorized as a way to further develop students' understanding…

Improving engineering effectiveness

NASA Technical Reports Server (NTRS)

Fiero, J. D.

1985-01-01

Methodologies to improve engineering productivity were investigated. The rocky road to improving engineering effectiveness is reviewed utilizing a specific semiconductor engineering organization as a case study. The organization had a performance problem regarding new product introductions. With the help of this consultant as a change agent the engineering team used a systems approach to through variables that were effecting their output significantly. Critical factors for improving this engineering organization's effectiveness and the roles/responsibilities of management, the individual engineers and the internal consultant are discussed.

A Study of the Relationship Between the Practice of Civil Engineering and Student Courses: Volume 1.

ERIC Educational Resources Information Center

Bull, A. J. U.; Richardson, E.

Australian civil engineers were surveyed for a study intended to establish a model for development based on a list of the basic stock of knowledge and techniques that need to be mastered by the graduate civil engineer. Following a brief introduction and summary, chapters 3-7 review the survey objectives, civil engineering definitions and…

The Humanistic Side of Engineering: Considering Social Science and Humanities Dimensions of Engineering in Education and Research

ERIC Educational Resources Information Center

Hynes, Morgan; Swenson, Jessica

2013-01-01

Mathematics and science knowledge/skills are most commonly associated with engineering's pre-requisite knowledge. Our goals in this paper are to argue for a more systematic inclusion of social science and humanities knowledge in the introduction of engineering to K-12 students. As part of this argument, we present a construct for framing the…

Perspectives in metabolic engineering: understanding cellular regulation towards the control of metabolic routes.

PubMed

Zadran, Sohila; Levine, Raphael D

2013-01-01

Metabolic engineering seeks to redirect metabolic pathways through the modification of specific biochemical reactions or the introduction of new ones with the use of recombinant technology. Many of the chemicals synthesized via introduction of product-specific enzymes or the reconstruction of entire metabolic pathways into engineered hosts that can sustain production and can synthesize high yields of the desired product as yields of natural product-derived compounds are frequently low, and chemical processes can be both energy and material expensive; current endeavors have focused on using biologically derived processes as alternatives to chemical synthesis. Such economically favorable manufacturing processes pursue goals related to sustainable development and "green chemistry". Metabolic engineering is a multidisciplinary approach, involving chemical engineering, molecular biology, biochemistry, and analytical chemistry. Recent advances in molecular biology, genome-scale models, theoretical understanding, and kinetic modeling has increased interest in using metabolic engineering to redirect metabolic fluxes for industrial and therapeutic purposes. The use of metabolic engineering has increased the productivity of industrially pertinent small molecules, alcohol-based biofuels, and biodiesel. Here, we highlight developments in the practical and theoretical strategies and technologies available for the metabolic engineering of simple systems and address current limitations.

Human Relations Class. A Syllabus.

ERIC Educational Resources Information Center

Guillen, Mary A.

A junior high level human relations class develops human interaction and oral communication skills. A week-by-week syllabus contains the following components: introduction of the students to each other and to the principles of body language, transactional analysis, and group interaction; behavior contracts; group dynamics topics and exercises;…

Parents and Infants: An Interactive Network. I. Introduction.

ERIC Educational Resources Information Center

Yarrow, Leon J.

This symposium introduction outlines the first phase of an investigation of the mother-father-infant triad as an interactive system, influencing both parent attitudes and behaviors and child development. The focus of the research was on the early determinants of parental behavior. Subjects were 67 middle class, white parents and their first-born…

Using Calibrated Peer Review to Teach Basic Research Skills

ERIC Educational Resources Information Center

Bracke, Marianne S.; Graveel, John G.

2014-01-01

Calibrated Peer Review (CPR) is an online tool being used in the class Introduction to Agriculture and Purdue University (AGR 10100) to integrate a writing and research component (http://cpr.molsci.ucla.edu/Home.aspx). Calibrated Peer Review combines the ability to create writing intensive assignments with an introduction to the peer-review…

Evaluation of Distance Learning in an "Introduction to Biostatistics" Class: A Case Study

ERIC Educational Resources Information Center

Evans, Scott R.; Wang, Rui; Yeh, Tzu-Min; Anderson, Jeff; Haija, Rammy; McBratney-Owen, Paul Madoc; Peeples, Lynne; Sinha, Subir; Xanthakis, Vanessa; Rajicic, Natasa; Zhang, Jiameng

2007-01-01

Biostatistics is not universally available in colleges/universities and is thus an attractive course to offer via distance education. However, evaluation of the impact of distance education on course enrollment and student success is lacking. We evaluated an "Introduction to Biostatistics" course at Harvard University that offered the distance…

Course in Introduction to Cross-Cultural Communication. Adult Education in the Community.

ERIC Educational Resources Information Center

Corvell, Wendy; Gavin, Dorothy; Knight, Melinda; Lorey, Barb

Materials are provided for Introduction to Cross-Cultural Communication, a 75-hour course developed by teachers experienced in working with students in adult literacy and basic education and English as a second language classes. The course is designed to provide adults with the skills and understanding to enable them to communicate…

Undergraduate optics program for the 21st Century

NASA Astrophysics Data System (ADS)

Palmer, James M.

2002-05-01

We have been offering a successful BS degree in optical engineering for the past ten years. We have produced more than 100 graduates, highly trained in basic optics and electronics. Our Industrial Affiliates, while very pleased with our graduates, requested that we produce some with greater mechanical engineering skills and knowledge. Our response was the creation of a new degree program, retaining the virtues of the previous one, but allowing a high degree of flexibility through the inclusion of minors within the program. The new program allows sufficient room for a variety of minors. Engineering minors identified include aerospace, computer, electrical, materials and mechanical. Science minors include astronomy, computer science, math and physics. Non-science minors accommodated include business, pre-health and pre-law. The new BSO program features: (1) Better structure and flow, more tightly coupling related classes; (2) New laboratory classes for juniors, linked to lecture classes; (3) Expanded optical deign, fabrication and testing classes; (4) New class in electronics for optics; (5) New classes in fiber optics and optical communications; (6) New capstone/senior project class for ABET compliance. This new BSO program will produce better entry-level optical scientists and engineers, and better candidates for graduate school. Our interactions with the external community will provide inputs concerning industrial needs, leading towards improved student counseling and program development. We will better serve national needs for skilled personnel in optics, and contribute even more to the optics workforce pipeline.

Heavy Lift Launch Capability with a New Hydrocarbon Engine

NASA Technical Reports Server (NTRS)

Threet, Grady E., Jr.; Holt, James B.; Philips, Alan D.; Garcia, Jessica A.

2011-01-01

The Advanced Concepts Office at NASA's George C. Marshall Space Flight Center was tasked to define the thrust requirement of a new liquid oxygen rich staged combustion cycle hydrocarbon engine that could be utilized in a launch vehicle to meet NASA s future heavy lift needs. Launch vehicle concepts were sized using this engine for different heavy lift payload classes. Engine out capabilities for one of the heavy lift configurations were also analyzed for increased reliability that may be desired for high value payloads or crewed missions. The applicability for this engine in vehicle concepts to meet military and commercial class payloads comparable to current ELV capability was also evaluated.

Pollution reduction technology program for class T4(JT8D) engines

NASA Technical Reports Server (NTRS)

Roberts, R.; Fiorentino, A. J.; Diehl, L. A.

1977-01-01

The technology required to develop commercial gas turbine engines with reduced exhaust emissions was demonstrated. Can-annular combustor systems for the JT8D engine family (EPA class T4) were investigated. The JT8D turbofan engine is an axial-flow, dual-spool, moderate-bypass-ratio design. It has a two-stage fan, a four-stage low-pressure compressor driven by a three-stage low-pressure turbine, and a seven-stage high-pressure compressor driven by a single-stage high-pressure turbine. A cross section of the JT8D-17 showing the mechanical configuration is given. Key specifications for this engine are listed.

A User’s Guide to the Coastal Engineering Research Center’s (CERC’S) Field Research Facility.

DTIC Science & Technology

1985-05-01

7 PART I: INTRODUCTION ............. ......................... 8 Use of the FRF .......... ......................... 12 Description of... INTRODUCTION 1. Federal interest in coastal engineering began in the 1920’s as a result of the increasing shoreline erosion along the recreational...lower at the pier end. As waves move 70 i- .r, N . SURVEY INTERVALS DAYS Jul 1. 1961 Jul 17 Aug 4 jAug 24 1Sep 19 Now 3 ’o1 en a 16Apr21I Jun?. to to to

Global differential geometry: An introduction for control engineers

NASA Technical Reports Server (NTRS)

Doolin, B. F.; Martin, C. F.

1982-01-01

The basic concepts and terminology of modern global differential geometry are discussed as an introduction to the Lie theory of differential equations and to the role of Grassmannians in control systems analysis. To reach these topics, the fundamental notions of manifolds, tangent spaces, vector fields, and Lie algebras are discussed and exemplified. An appendix reviews such concepts needed for vector calculus as open and closed sets, compactness, continuity, and derivative. Although the content is mathematical, this is not a mathematical treatise but rather a text for engineers to understand geometric and nonlinear control.

Introduction to China’s Aeronautical Engineering Institutions of Higher Learning -- Student Enrollment in 1981 in Higher Aeronautical Colleges and Schools Administered by the Third Ministry of Machine Building

DTIC Science & Technology

1981-10-13

FTD-ID(RS )T-1029-81 Si FOREIGN TECHNOLOGY DIVISION INTRODUCTION TO CHINA’S AERONAUTICAL ENGINEERING INSTITUTIONS OF HIGHER LEARNING -- STUDENT...TRODUCTION TO JWINA’ S PRONAUTICAL ,NGINEERING 7’ S- NSTITUTIONS OF •IGHER LEARNING -- 4TUDENT I-ENROLLMENT IN 1951 IN ITGHER AERONAUTICAL OLLEGES AND...BYs ADVOCATEDOR IMPLIED ARE THOSE Ot THE SOURCE AND DO NOT NECESSARILY REFLECT THE POSITION TRANSLATION DIVISION OR OPINION OF THE FOREIGN TECHNOLOGY

Engineering Ethics in the Subject of Engineering History

NASA Astrophysics Data System (ADS)

Isohata, Hiroshi

Engineering ethics has been focused in the field of engineering education since the introduction of accreditation system of engineering education. In this paper, contents of the subject of engineering history are examined and discussed from the viewpoints of education of engineering ethics through a practical case of civil engineering history in a college. For the first step, codes of engineering ethics regulated in various engineering organizations are analyzed and the common contents are extracted to set the requirements for the education of engineering ethics. Then contents of the subject of engineering history are examined according to the requirements. Finally, conditions of engineering history for engineering ethics are discussed.

40 CFR 87.80 - Introduction.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 20 2011-07-01 2011-07-01 false Introduction. 87.80 Section 87.80 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF AIR... various operating points representative of engine usage in aircraft. Other smoke measurement systems may...

40 CFR 87.80 - Introduction.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Introduction. 87.80 Section 87.80 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF AIR... various operating points representative of engine usage in aircraft. Other smoke measurement systems may...

Reviews Equipment: Data logger Book: Imagined Worlds Equipment: Mini data loggers Equipment: PICAXE-18M2 data logger Books: Engineering: A Very Short Introduction and To Engineer Is Human Book: Soap, Science, & Flat-Screen TVs Equipment: uLog and SensorLab Web Watch

NASA Astrophysics Data System (ADS)

2012-07-01

WE RECOMMEND Data logger Fourier NOVA LINK: data logging and analysis To Engineer is Human Engineering: essays and insights Soap, Science, & Flat-Screen TVs People, politics, business and science overlap uLog sensors and sensor adapter A new addition to the LogIT range offers simplicity and ease of use WORTH A LOOK Imagined Worlds Socio-scientific predictions for the future Mini light data logger and mini temperature data logger Small-scale equipment for schools SensorLab Plus LogIT's supporting software, with extra features HANDLE WITH CARE CAXE110P PICAXE-18M2 data logger Data logger 'on view' but disappoints Engineering: A Very Short Introduction A broad-brush treatment fails to satisfy WEB WATCH Two very different websites for students: advanced physics questions answered and a more general BBC science resource

Relevance of graduate programs - university viewpoint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guerrero, E.T.

1978-01-01

Graduate programs in engineering evolved in the early 1900's and saw rapid expansion during, and after World War II, particularly after Sputnik I. The Master's Degree is an extension of Bachelor's work, tending toward specialization and an introduction into inquiry and research. The Doctoral Degree represents considerably more and signifies mastery of a field of learning and training for independent inquiry. The upper one-third of Bachelor's graduates in petroleum engineering should obtain a Master's Degree and the upper 10 to 20% of these should study for the Ph.D. Drilling and production operations involve a rapidly changing and ever more complexmore » technology. Recent innovations of computerized drilling optimization, numerical simulation of production and reservoir engineering problems, and introduction of a host of enhanced oil recovery methods require more petroleum engineers with Master's Degrees, as well as some with Ph.D Degrees. Engineers can receive valuable education through company continuing education programs; however, advanced education is best obtained in an accredited university.« less

Education and the Ideologies of Racism.

ERIC Educational Resources Information Center

Sarup, Madan

As an introduction to education and the ideologies of racism within it, this book discusses the link between education and social class. The problematic relationship between class, gender, and race, and how this affects black students is addressed. The term "Black" is being used for nonwhite students rather than strictly those of African…

Revolution.

ERIC Educational Resources Information Center

Garrahy, Dennis J.

One of a series of social studies units designed to develop the reading and writing skills of low achievers, this student activity book focuses on the theme of revolution. The unit can be used for high school classes, individual study in alternative and continuing high schools, and adult education classes. Following an introduction, material is…

Consumerism Theme.

ERIC Educational Resources Information Center

Garrahy, Dennis J.

One of a series of social studies units designed to develop the reading and writing skills of low achievers, this student activity book focuses on the theme of consumerism. The unit can be used for high school classes, individual study in alternative and continuing high schools, and adult education classes. Following an introduction, five sections…

Test Anxiety Reduction. Curriculum Guide.

ERIC Educational Resources Information Center

Silverman, Eda; Hanna, Joyce

This curriculum guide is intended to assist teachers in helping their adult and teenage students learn to cope with their test anxiety. The introduction examines some of the causes of test anxiety and its negative ramifications from the standpoint of class placement, class grades, employment opportunities, and job advancement. General guidelines…

Computational fluid dynamics - An introduction for engineers

NASA Astrophysics Data System (ADS)

Abbott, Michael Barry; Basco, David R.

An introduction to the fundamentals of CFD for engineers and physical scientists is presented. The principal definitions, basic ideas, and most common methods used in CFD are presented, and the application of these methods to the description of free surface, unsteady, and turbulent flow is shown. Emphasis is on the numerical treatment of incompressible unsteady fluid flow with primary applications to water problems using the finite difference method. While traditional areas of application like hydrology, hydraulic and coastal engineering and oceanography get the main emphasis, newer areas of application such as medical fluid dynamics, bioengineering, and soil physics and chemistry are also addressed. The possibilities and limitations of CFD are pointed out along with the relations of CFD to other branches of science.

Results in Developing an Engineering Degree Program in Safeguards and Security of Nuclear Materials at Moscow Engineering Physics Institute

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kryuchkov, Eduard F.; Geraskin, Nikolay I.; Killinger, Mark H.

The world’s first master’s degree program in nuclear safeguards and security, established at Moscow Engineering Physics Institute (MEPhI), has now graduated nine classes of students. Most of the graduates have gone on to work at government agencies, research organizations, or obtain their PhD. In order to meet the demand for safeguards and security specialists at nuclear facilities, MEPhI established a 5½ year engineering degree program that provides more hands-on training desired by facilities. In February 2004, the first students began their studies in the new discipline Nuclear Material Safeguards and Nonproliferation. This class, as well as other subsequent classes, includedmore » students who started the program in their third year of studies, as the first 2½ years consists of general engineering curriculum. Fourteen students made up the first graduating class, receiving their engineering degrees in February 2007. The topics addressed in this paper include specific features of the program caused by peculiarities of Russian education legislation and government quality control of academic education. This paper summarizes the main joint actions undertaken by MEPhI and the US National Laboratories in conjunction with the U.S. Department of Energy, to develop the engineering degree program. Also discussed are the program’s specific training requirements, student internships, and job placement. The paper concludes with recommendations from a recent international seminar on nonproliferation education and training.« less

Engineering in Elementary STEM Education: Curriculum Design, Instruction, Learning, and Assessment

ERIC Educational Resources Information Center

Cunningham, Christine M.

2018-01-01

Bolstered by new standards and new initiatives to promote STEM education, engineering is making its way into the school curriculum. This comprehensive introduction will help elementary educators integrate engineering into their classroom, school, or district in age-appropriate, inclusive, and engaging ways. Building on the work of a Museum of…

Science and Technology Resources on the Internet: Standards Resources for Engineering and Technology

ERIC Educational Resources Information Center

Phillips, Margaret; Huber, Sarah

2017-01-01

The goal of this webliography is to provide an introduction to standards resources for librarians that support post-secondary engineering and technology programs, as well as engineering and technology faculty members and students. It serves as a reference on standards collection development and integrating standards information literacy into…

Teaching Sustainable Entrepreneurship to Engineering Students: The Case of Delft University of Technology

ERIC Educational Resources Information Center

Bonnet, Hans; Quist, Jaco; Hoogwater, Daan; Spaans, Johan; Wehrmann, Caroline

2006-01-01

Sustainability, enhancement of personal skills, social aspects of technology, management and entrepreneurship are of increasing concern for engineers and therefore for engineering education. In 1996 at Delft University of Technology this led to the introduction of a subject on sustainable entrepreneurship and technology in the course programmes of…

Turbocharged Diesels

NASA Technical Reports Server (NTRS)

1984-01-01

In a number of feasibility studies of turbine rotor designs, engineers of Cummins Engine Company, Inc.'s turbocharger group have utilized a computer program from COSMIC. Part of Cummins research effort is aimed toward introduction of advanced turbocharged engines that deliver extra power with greater fuel efficiency. Company claims use of COSMIC program substantially reduced software development costs.

Introduction of Life Cycle Assessment and Sustainability Concepts in Chemical Engineering Curricula

ERIC Educational Resources Information Center

Gallego-Schmid, Alejandro; Schmidt Rivera, Ximena C.; Stamford, Laurence

2018-01-01

Purpose: The implementation of life cycle assessment (LCA) and carbon footprinting represents an important professional and research opportunity for chemical engineers, but this is not broadly reflected in chemical engineering curricula worldwide. This paper aims to present the implementation of a coursework that is easy to apply, free of cost,…

Impact of Commercial Search Engines and International Databases on Engineering Teaching and Research

ERIC Educational Resources Information Center

Chanson, Hubert

2007-01-01

For the last three decades, the engineering higher education and professional environments have been completely transformed by the "electronic/digital information revolution" that has included the introduction of personal computer, the development of email and world wide web, and broadband Internet connections at home. Herein the writer compares…

Engineering Education on the "Fuzzy" Front End: A High-Technology Entrepreneurship Model

ERIC Educational Resources Information Center

Crawford, G. P.; Broer, D. J.; Bastiaansen, C. W. M.

2006-01-01

We have developed a university entrepreneurship program, culminating in a prototype and business plan, with five objectives: (1) value for all academic participants' (2) introduction to engineering issues for students; (3) refinement of engineering students' "soft" skills; (4) training for students in creating value out of embryonic ideas; and (5)…

Library Systems Engineering: An Introduction.

ERIC Educational Resources Information Center

Buckland, Michael K.; Tolliver, Don L.

The application of systems engineering and operations research to the problems of libraries has developed quite strongly during the past five years. The purpose of this paper is to draw attention to this relatively new area. There are serious problems of applying systems engineering to libraries. This is to be expected in the case of a…

D-21B RBCC Modification Feasibility Study

NASA Technical Reports Server (NTRS)

1999-01-01

This report presents a feasibility study on the modifications required to re-engine the Lockheed D-21 Drone for use as a NASA RBCC engine. An introduction, background information, engine configuration and performance, propulsion system integration, loads/thermal analysis, avionics/systems, flight test results, costs and work schedule, and some conclusions are presented.

Incorporating Critical Thinking into an Engineering Undergraduate Learning Environment

ERIC Educational Resources Information Center

Adair, Desmond; Jaeger, Martin

2016-01-01

Critical thinking extends to all aspects of professional engineering, especially in technical development, and, since the introduction of the ABET 2000 criteria, there has been an increased emphasis in engineering education on the development of critical thinking skills. What is hoped for is that the students obtain critical thinking skills to…

The Big Crush: An Introduction to Materials Testing

ERIC Educational Resources Information Center

Roman, Harry T.

2011-01-01

Lots of engineering thinking can be involved in crushing things. As an example, engineers spend a great deal of time designing crush-proof packaging for delicate equipment and packing materials for items that must be stored or shipped. This article presents an activity wherein students can begin to appreciate the technology behind the engineering.…

Stunden-abstract. Einfuhrung un die Unterrichtseinheit "U.S.A." (A Class-hour Abstract. Introduction to the Teaching Unit "U.S.A.")

ERIC Educational Resources Information Center

Keiner, Helmut

1978-01-01

Describes a class hour in a 10th grade class in English, using the teaching unit "USA." Historical and geographical aspects are considered. The aim is to acquire sociological knowledge and to articulate it in English. For each phase of the hour, introductory questions, goals, and materials used are provided. (Text is in German.) (IFS/WGA)

Immersion, Relevance and Transferability: The Motivational Preferences of Lower Secondary Students towards a Newly Created Praxis-Based Class Music Program

ERIC Educational Resources Information Center

Lowe, Geoffrey; Coy, Neil

2016-01-01

The purpose of this study was to gather information on measures of motivation among year 7, 8 and 9 students enrolled in class music in a major Australian secondary school. The rationale for the study was to gain insights into why retention in the class music program had dramatically increased since the introduction of a new teaching program. A…

Discriminative non-negative matrix factorization (DNMF) and its application to the fault diagnosis of diesel engine

NASA Astrophysics Data System (ADS)

Yang, Yong-sheng; Ming, An-bo; Zhang, You-yun; Zhu, Yong-sheng

2017-10-01

Diesel engines, widely used in engineering, are very important for the running of equipments and their fault diagnosis have attracted much attention. In the past several decades, the image based fault diagnosis methods have provided efficient ways for the diesel engine fault diagnosis. By introducing the class information into the traditional non-negative matrix factorization (NMF), an improved NMF algorithm named as discriminative NMF (DNMF) was developed and a novel imaged based fault diagnosis method was proposed by the combination of the DNMF and the KNN classifier. Experiments performed on the fault diagnosis of diesel engine were used to validate the efficacy of the proposed method. It is shown that the fault conditions of diesel engine can be efficiently classified by the proposed method using the coefficient matrix obtained by DNMF. Compared with the original NMF (ONMF) and principle component analysis (PCA), the DNMF can represent the class information more efficiently because the class characters of basis matrices obtained by the DNMF are more visible than those in the basis matrices obtained by the ONMF and PCA.

Online Normalization Algorithm for Engine Turbofan Monitoring

DTIC Science & Technology

2014-10-02

Online Normalization Algorithm for Engine Turbofan Monitoring Jérôme Lacaille 1 , Anastasios Bellas 2 1 Snecma, 77550 Moissy-Cramayel, France...understand the behavior of a turbofan engine, one first needs to deal with the variety of data acquisition contexts. Each time a set of measurements is...it auto-adapts itself with piecewise linear models. 1. INTRODUCTION Turbofan engine abnormality diagnosis uses three steps: reduction of

Things for You to Know. Fuel System. Student Manual--Introduction. Small Engine Repair Series. First Edition.

ERIC Educational Resources Information Center

Hill, Pamela

This student manual, part of a small-engine repair series on servicing fuel systems, is designed for use by special needs students in Texas. Information covered in this manual is considered to be the minimum that students need to know about fuel systems in order to get small-engine repair jobs. The manual introduces students to small-engine fuel…

40 CFR 87.1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... engines. Class TF means all turbofan or turbojet aircraft engines or aircraft engines designed for... turbine engines employed for propulsion of aircraft designed to operate at supersonic flight speeds... Model means all commercial aircraft turbine engines which are of the same general series, displacement...

40 CFR 87.1 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... engines. Class TF means all turbofan or turbojet aircraft engines or aircraft engines designed for... turbine engines employed for propulsion of aircraft designed to operate at supersonic flight speeds... Model means all commercial aircraft turbine engines which are of the same general series, displacement...

40 CFR 87.1 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... engines. Class TF means all turbofan or turbojet aircraft engines or aircraft engines designed for... turbine engines employed for propulsion of aircraft designed to operate at supersonic flight speeds... Model means all commercial aircraft turbine engines which are of the same general series, displacement...

Standardization of Clinical Skill Evaluation in Physical/Occupational Therapist Education –Effects of Introduction of an Education System Using OSCE–

PubMed Central

Sakurai, Hiroaki; Kanada, Yoshikiyo; Sugiura, Yoshito; Motoya, Ikuo; Yamada, Masayuki; Tomita, Masao; Naka, Toru; Teranishi, Toshio; Tanabe, Shigeo; Tsujimura, Toru; Okanishi, Tetsuo

2013-01-01

[Purpose] A major issue in physical/occupational therapist education is the improvement of students' clinical techniques. In this study, we introduced an education system using an Objective Structured Clinical Examination (OSCE), and made an attempt at standardization of its evaluation. [Subjects] The subjects were 227 students in the classes of 2008 to 2010 who enrolled at our university between 2004 and 2006, before the introduction of the education system using OSCE, and 221 students in the classes of 2011 to 2013 who enrolled between 2007 and 2009, after the introduction. [Methods] Performances in attitude and skills (performance in clinical training and OSCE) were compared between before and after the introduction of OSCE. OSCE results were compared between before and after clinical trainings at each OSCE Level; and the correlation of between performances in clinical training and OSCE was examined. [Results] Performances in OSCE and clinical training (attitude, skills) were improved by the introduction of the education system using OSCE, but no significant correlation was observed in the relationship between performances in OSCE and clinical training. [Conclusion] Further studies should be conducted aiming at the standardization of clinical skill evaluation in postgraduate education to establish an education system using OSCE. PMID:24259918

40 CFR 89.321 - Oxides of nitrogen analyzer calibration.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... (b) Prior to its introduction into service, and monthly thereafter, the chemiluminescent oxides of... periodic calibration. Prior to its introduction into service, after any maintenance which could alter... represent good engineering practice. For each range calibrated, if the deviation from a least-squares best...

U.S. Naval Sea Cadet Corps 2009 Annual Report

DTIC Science & Technology

2009-01-01

Ceremonial Honor Guard CA, NJ, NY, WA (7 classes) Culinary Arts MI, TN, NY (7 classes) Field Training GA, SC, MN (6 classes) Fire Fighting MI, MA (2...the pre- viously established naval engineering, seamanship, culinary arts and operations specialist classes, additional classes in Naval gunners

Optical versus virtual: teaching assistant perceptions of the use of virtual microscopy in an undergraduate human anatomy course.

PubMed

Collier, Larissa; Dunham, Stacey; Braun, Mark W; O'Loughlin, Valerie Dean

2012-01-01

Many studies that evaluate the introduction of technology in the classroom focus on student performance and student evaluations. This study focuses on instructor evaluation of the introduction of virtual microscopy into an undergraduate anatomy class. Semi-structured interviews were conducted with graduate teaching assistants (TA) and analyzed through qualitative methods. This analysis showed that the teaching assistants found the virtual microscope to be an advantageous change in the classroom. They cite the ease of use of the virtual microscope, access to histology outside of designated laboratory time, and increasing student collaboration in class as the primary advantages. The teaching assistants also discuss principal areas where the use of the virtual microscope can be improved from a pedagogical standpoint, including requiring students to spend more time working on histology in class. Copyright © 2011 American Association of Anatomists.

Reviews Book: The 4% Universe: Dark Matter, Dark Energy and the Race to Discover the Rest of Reality Book: Quantitative Understanding of Biosystems: An Introduction to Biophysics Book: Edison's Electric Light: The Art of Invention Book: The Edge of Physics: Dispatches from the Frontiers of Cosmology Equipment: Voicebox Equipment: Tracker 4 Books: Hands-On Introduction to NI LabVIEW with Vernier, and Engineering Projects with NI LabVIEW and Vernier Places to Visit: Discovery Museum Book: Philosophy of Science: A Very Short Introduction Web Watch

NASA Astrophysics Data System (ADS)

2011-11-01

WE RECOMMEND Quantitative Understanding of Biosystems: An Introduction to Biophysics Text applies physics to biology concepts Edison's Electric Light: The Art of Invention Edison's light still shines brightly The Edge of Physics: Dispatches from the Frontiers of Cosmology Anecdotes explore cosmology Voicebox Voicebox kit discovers the physics and evolution of speech Tracker 4 Free software tracks motion analysis Hands-On Introduction to NI LabVIEW with Vernier, and Engineering Projects with NI LabVIEW and Vernier Books support the LabVIEW software Discovery Museum Newcastle museum offers science enjoyment for all Philosophy of Science: A Very Short Introduction Philosophy opens up science questions WORTH A LOOK The 4% Universe: Dark Matter, Dark Energy and the Race to Discover the Rest of Reality Book researches the universe WEB WATCH Superconductivity websites are popular

Hanging an Airplane: A Case Study in Static Equilibrium

ERIC Educational Resources Information Center

Katz, Debora M.

2009-01-01

Our classrooms are filled with engineering majors who take a semester-long course in static equilibrium. Many students find this class too challenging and drop their engineering major. In our introductory physics class, we often breeze through static equilibrium; to physicists equilibrium is just a special case of Newton's second law. While it is…

A Modest Critical Pedagogy for English as a Foreign Language Education

ERIC Educational Resources Information Center

Kim, Mi Kyong; Pollard, Vikki Ann

2017-01-01

This paper uses the introduction of critical pedagogy to an English as a Foreign Language class in the Republic of Korea as a case study for a "modest critical pedagogy" (Tinning 2002). Focusing on the stress and resistances experienced during the introduction, we suggest a modest critical pedagogy that 1) makes the paradigm itself an…

Le journal: une introduction (The Newspaper: An Introduction). Teacher's Guide [and Module].

ERIC Educational Resources Information Center

Scane, Joyce; Ullmann, Rebecca

A reading activity module based on the newspaper was designed for students in grades 6-8 who have had two years of instruction in French as a second language. The module includes the teacher's guide, the facsimile newspaper, and transparencies for class activities. Module objectives are to introduce students to both newspaper reading and…

Jon Stewart Comes to Class: The Learning Effects of "America (The Book)" in Introduction to American Government Courses

ERIC Educational Resources Information Center

Baumgartner, Jody C.; Morris, Jonathan S.

2008-01-01

This project posits that incorporating political humor into the classroom can have a positive effect on learning in higher education. Specifically, we present preliminary findings from a quasi-experiment in which a humorous, "mock" textbook titled America (The Book) (Stewart, Karlin, and Javerbaum 2004) was incorporated into Introduction to…

Optical versus Virtual: Teaching Assistant Perceptions of the Use of Virtual Microscopy in an Undergraduate Human Anatomy Course

ERIC Educational Resources Information Center

Collier, Larissa; Dunham, Stacey; Braun, Mark W.; O'Loughlin, Valerie Dean

2012-01-01

Many studies that evaluate the introduction of technology in the classroom focus on student performance and student evaluations. This study focuses on instructor evaluation of the introduction of virtual microscopy into an undergraduate anatomy class. Semi-structured interviews were conducted with graduate teaching assistants (TA) and analyzed…

The general theory of convolutional codes

NASA Technical Reports Server (NTRS)

Mceliece, R. J.; Stanley, R. P.

1993-01-01

This article presents a self-contained introduction to the algebraic theory of convolutional codes. This introduction is partly a tutorial, but at the same time contains a number of new results which will prove useful for designers of advanced telecommunication systems. Among the new concepts introduced here are the Hilbert series for a convolutional code and the class of compact codes.

Modern Cast Irons in Chemical Engineering

DTIC Science & Technology

1934-11-09

fl’ceew. T I SOCIETY OF CHEMICAL INDUSTRY CHEMICAL ENGINEERING GROUP MODERN CAST IRONS IN CHEMICAL ENGINEERING By J. G. PEARCE, M.Sc., F.Inst.P...CAST IRONS IN CHEMICAL ENGINEERING By J. G. PEARCE, M.Sc., F.Inst.P., M.I.E.E.* INTRODUCTION to chemical or thermal resistance. Small blow-holes Any...consideration of modern cast irons in chemical seldom appear to reduce the mechanical strength of engineering should strictly be prefaced by a definition

A Basic Comparison of the Space Shuttle Main Engine and the J-2X Engine

NASA Technical Reports Server (NTRS)

Ayer, Adam

2007-01-01

With the introduction of the new manned space effort through the Constellation Program, there is an interest to have a basic comparison of the current Space Shuttle Main Engine (SSME) to the J-2X engine used for the second stage of both the Ares I and Ares V rockets. This paper seeks to compare size, weight and thrust capabilities while drawing simple conclusions on differences between the two engines.

40 CFR 89.320 - Carbon monoxide analyzer calibration.

Code of Federal Regulations, 2010 CFR

2010-07-01

... introduction into service and annually thereafter, the NDIR carbon monoxide analyzer shall be checked for... to its introduction into service, after any maintenance which could alter calibration, and every two... engineering practice. For each range calibrated, if the deviation from a least-squares best-fit straight line...

Medical imaging education in biomedical engineering curriculum: courseware development and application through a hybrid teaching model.

PubMed

Zhao, Weizhao; Li, Xiping; Chen, Hairong; Manns, Fabrice

2012-01-01

Medical Imaging is a key training component in Biomedical Engineering programs. Medical imaging education is interdisciplinary training, involving physics, mathematics, chemistry, electrical engineering, computer engineering, and applications in biology and medicine. Seeking an efficient teaching method for instructors and an effective learning environment for students has long been a goal for medical imaging education. By the support of NSF grants, we developed the medical imaging teaching software (MITS) and associated dynamic assessment tracking system (DATS). The MITS/DATS system has been applied to junior and senior medical imaging classes through a hybrid teaching model. The results show that student's learning gain improved, particularly in concept understanding and simulation project completion. The results also indicate disparities in subjective perception between junior and senior classes. Three institutions are collaborating to expand the courseware system and plan to apply it to different class settings.

Alternative-fueled truck demonstration natural gas program: Caterpillar G3406LE development and demonstration

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

In 1990, the California Energy Commission, the South Coast Air Quality Management District, and the Southern California Gas Company joined together to sponsor the development and demonstration of compressed natural gas engines for Class 8 heavy-duty line-haul trucking applications. This program became part of an overall Alternative-Fueled Truck Demonstration Program, with the goal of advancing the technological development of alternative-fueled engines. The demonstration showed natural gas to be a technically viable fuel for Class 8 truck engines.

Beyond the Syllabus: Using the First Day of Class in Physical Chemistry as an Introduction to the Development of Macroscopic, Molecular-Level, and Mathematical Models

ERIC Educational Resources Information Center

Bruce, Chrystal D.

2013-01-01

The initial interaction among student, instructor, and content on the first day of class is critical in setting the stage for the remainder of the semester. While many students would like to ease into the semester, experienced faculty realize that the first day of class provides a one-time opportunity to shape the students' first impression…

Engineering Outreach through College Pre-Orientation Programs: MIT Discover Engineering

ERIC Educational Resources Information Center

Thompson, Mary Kathryn; Consi, Thomas R.

2007-01-01

Freshmen Pre-Orientation Programs (FPOPs) can be powerful outreach tools for incoming college students and provide an exciting introduction to the field of engineering. The benefits reach not only the first year students, but also the upperclassmen who help to run the programs and the departments that sponsor them. A family of three engineering…

Enhancing the Programming Experience for First-Year Engineering Students through Hands-On Integrated Computer Experiences

ERIC Educational Resources Information Center

Canfield, Stephen L.; Ghafoor, Sheikh; Abdelrahman, Mohamed

2012-01-01

This paper describes the redesign and implementation of the course, "Introduction to Programming for Engineers" using microcontroller (MCU) hardware as the programming target. The objective of this effort is to improve the programming competency for engineering students by more closely relating the initial programming experience to the student's…

Use of Concept Maps as an Assessment Tool in Mechanical Engineering Education

ERIC Educational Resources Information Center

Tembe, B. L.; Kamble, S. K.

2013-01-01

The purpose of this study to investigate, how third year mechanical engineering students are able to use their knowledge of concept maps in their study of the topic of "Introduction to the Internal Combustion Engines (IICE)". 41 students participated in this study. Firstly, the students were taught about concept maps and then asked to…

Practical Tips and Strategies for Finding Information on the Internet.

ERIC Educational Resources Information Center

Armstrong, Rhonda; Flanagan, Lynn

This paper presents the most important concepts and techniques to use in successfully searching the major World Wide Web search engines and directories, explains the basics of how search engines work, and describes what is included in their indexes. Following an introduction that gives an overview of Web directories and search engines, the first…

40 CFR 90.711 - Suspension and revocation of certificates of conformity.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the regulations of this part by testing as many engines as needed so that the CumSum statistic, as... continue introduction into commerce of a modified version of that family, the following actions must be... as many engines as needed from the modified engine family so that the CumSum statistic, as calculated...

Branch Detonation of a Pulse Detonation Engine With Flash Vaporized JP-8

DTIC Science & Technology

2006-12-01

Mark F. Reeder (Member) date iii Abstract Pulse Detonation Engines ( PDE ) operating on liquid hydrocarbon fuels are... Detonation Transition FF – Fill Fraction FN – Flow Number NPT – National Pipe Thread OH – Hydroxyl PDE – Pulse Detonation Engine PF – Purge...Introduction Motivation Research on Pulsed Detonation Engines ( PDE ) has increased over the past ten years due to the potential for increased

Pressure Characteristics of a Diffuser in a Ram RDE Propulsive Device

DTIC Science & Technology

2017-07-21

Continuous detonation Rotating-detonation- engine Ethylene-air Diffuser Pressure feedback Modeling and simulation Office of Naval Research 875 N. Randolph...RDE PROPULSIVE DEVICE INTRODUCTION This report focuses on the diffuser of a ram Rotating Detonation Engine (RDE) device. A ram RDE is a ramjet with...the constant pressure combustion chamber replaced with a Rotating Detonation Engine combustor to accomplish pressure gain combustion. A ram engine

The White Majority: Between Poverty and Affluence.

ERIC Educational Resources Information Center

Howe, Louise Kapp, Ed.

Contents of this book include: "Introduction," Louise Kapp Howe; "The revolt of the white lower-middle class," Pete Hamill; "Life with Cappelli on $101 a week," Harvey Aronson; "Blue-collar marriages and families," Mirra Komarovsky; "Working-class youth: alienation without an image," William Simon and John H. Gagnon; "Greasers, Dupers and Hippies:…

76 FR 72482 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Order Granting...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-23

... Rule To Increase the Number of Series Permitted Per Class in the Short Term Option Series Program November 17, 2011. I. Introduction On September 19, 2011, the Chicago Board Options Exchange, Incorporated... proposed rule change to increase the number of series permitted per class in the Short Term Options Series...

Introduction of Interactive Learning into French University Physics Classrooms

ERIC Educational Resources Information Center

Rudolph, Alexander L.; Lamine, Brahim; Joyce, Michael; Vignolles, Hélène; Consiglio, David

2014-01-01

We report on a project to introduce interactive learning strategies (ILS) to physics classes at the Université Pierre et Marie Curie, one of the leading science universities in France. In Spring 2012, instructors in two large introductory classes, first-year, second-semester mechanics, and second-year introductory electricity and magnetism,…

Students' Self-Esteem and Their Perception of Teacher Behavior: A Study of Between-Class Ability Grouping

ERIC Educational Resources Information Center

Kususanto, Prihadi; Ismail, Hairul Nizam; Jamil, Hazri

2010-01-01

Introduction: Between-class ability grouping practice in Malaysian Secondary Schools was studied in order to find the influence students' perception on their teachers' behavior on their self-esteem. Students' perception on teachers' behaviors were divided into two categories: controlling students' behavior to avoid disciplinary matters and…

The Coagulation Method of Starting Lecture-Discussion Courses

ERIC Educational Resources Information Center

Nyberg, David

1976-01-01

Describes a method used in the first class periods of a foundations of education course of 20-35 students to introduce students to each other and develop the interpersonal climate necessary for an effective discussion course. Involves breaking up into groups of five strangers for personal introductions and later class presentations. (JT)

Participant Observation: Teaching Students the Benefits of Using a Framework

ERIC Educational Resources Information Center

Daas, Karen L.; McBride, M. Chad

2014-01-01

Participant observation is a topic covered in most Introduction to Communication Research classes and specialized courses on qualitative inquiry. However, as humans are natural observers in everyday life, students may not appreciate the importance of systematic and thoughtful observation and note taking. The purpose of the one-to-two class period…

Heterogeneous Associations of Second-Graders' Learning in Robotics Class

ERIC Educational Resources Information Center

Cho, Eunji; Lee, Kyunghwa; Cherniak, Shara; Jung, Sung Eun

2017-01-01

Drawing on Latour's (Reassembling the social: an introduction to actor--network-theory, Oxford University Press, New York, 2005), this manuscript discusses a study of a robotics class in a public, Title I elementary school. Compared with theoretical frameworks (e.g., constructivism and constructionism) dominant in the field of early childhood…

Can Human Subject Pool Participation Benefit Sociology Students?

ERIC Educational Resources Information Center

Chin, Lynn Gencianeo; Gibbs Stayte, Patricia

2015-01-01

Instructors at non-research institutions are less able to expose their students to research firsthand. Utilizing human subject pools (HSPs) in class may be a solution. Given that HSPs tend to be used in introduction to psychology classes at research institutions, we examine a community college HSP to answer three questions: (1) Do community…

Beliefs and Expectations of Principles of Marketing Students

ERIC Educational Resources Information Center

Ferrell, Linda; Gonzalez, Gabriel

2004-01-01

Students were surveyed to determine their beliefs and expectations prior to taking their Principles of Marketing class. The students were surveyed on the first day of class before any introduction to the course. The students were asked eight open-ended questions to determine their knowledge and awareness about marketing as a field of study. The…

Upper-Secondary Agricultural Course. A Suggested Three-Year Teacher's Guide. InfoTVE 13.

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Paris (France).

This teacher's guide provides syllabi for a 3-year program for upper secondary agricultural programs in rural agricultural schools. Part 1 contains an introduction, recommendations for early morning practical classes, and suggestions for scheduling of theoretical classes. Part 2 consists of the syllabi. Each syllabus offers a content outline. The…

Adding Interactivity to a Non-Interative Class

ERIC Educational Resources Information Center

Rogers, Gary; Krichen, Jack

2004-01-01

The IT 3050 course at Capella University is an introduction to fundamental computer networking. This course is one of the required courses in the Bachelor of Science in Information Technology program. In order to provide a more enriched learning environment for learners, Capella has significantly modified this class (and others) by infusing it…

An Introduction to Thermodynamic Performance Analysis of Aircraft Gas Turbine Engine Cycles Using the Numerical Propulsion System Simulation Code

NASA Technical Reports Server (NTRS)

Jones, Scott M.

2007-01-01

This document is intended as an introduction to the analysis of gas turbine engine cycles using the Numerical Propulsion System Simulation (NPSS) code. It is assumed that the analyst has a firm understanding of fluid flow, gas dynamics, thermodynamics, and turbomachinery theory. The purpose of this paper is to provide for the novice the information necessary to begin cycle analysis using NPSS. This paper and the annotated example serve as a starting point and by no means cover the entire range of information and experience necessary for engine performance simulation. NPSS syntax is presented but for a more detailed explanation of the code the user is referred to the NPSS User Guide and Reference document (ref. 1).

Introduction and expression of genes for metabolic engineering applications in Saccharomyces cerevisiae.

PubMed

Da Silva, Nancy A; Srikrishnan, Sneha

2012-03-01

Metabolic pathway engineering in the yeast Saccharomyces cerevisiae leads to improved production of a wide range of compounds, ranging from ethanol (from biomass) to natural products such as sesquiterpenes. The introduction of multienzyme pathways requires precise control over the level and timing of expression of the associated genes. Gene number and promoter strength/regulation are two critical control points, and multiple studies have focused on modulating these in yeast. This MiniReview focuses on methods for introducing genes and controlling their copy number and on the many promoters (both constitutive and inducible) that have been successfully employed. The advantages and disadvantages of the methods will be presented, and applications to pathway engineering will be highlighted. © 2011 Federation of European Microbiological Societies. Published by Blackwell Publishing Ltd. All rights reserved.

14 CFR 34.60 - Introduction.

Code of Federal Regulations, 2013 CFR

2013-01-01

... test fuel that meets the specifications described in Appendix 4 of ICAO Annex 16. The test fuel must... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT FUEL VENTING AND EXHAUST EMISSION REQUIREMENTS FOR TURBINE ENGINE POWERED AIRPLANES Test Procedures for Engine Exhaust...

Home school student visit and introduction to rail transportation and engineering.

DOT National Transportation Integrated Search

2016-06-22

This project consisted of hosting local Champaign-Urbana, Illinois home school students for a visit to : the Rail Transportation and Engineering Center (RailTEC) at the University of Illinois at Urbana- : Champaign (UIUC). Beyond visiting RailTEC, st...

75 FR 70044 - Withdrawal of Regulatory Guide 1.39

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-16

...: Hector L. Rodriguez-Luccioni, Regulatory Guide Development Branch, Division of Engineering, Office of...-251-7685 or e-mail [email protected] . SUPPLEMENTARY INFORMATION: I. Introduction The... N. Ridgely, Acting Chief, Regulatory Guide Development Branch, Division of Engineering, Office of...

14 CFR 34.1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... series, displacement, and design characteristics and are approved under the same type certificate... engines. Class TF means all turbofan or turbojet aircraft engines or aircraft engines designed for... turbine engines employed for propulsion of aircraft designed to operate at supersonic flight speeds...

14 CFR 34.1 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... series, displacement, and design characteristics and are approved under the same type certificate... engines. Class TF means all turbofan or turbojet aircraft engines or aircraft engines designed for... turbine engines employed for propulsion of aircraft designed to operate at supersonic flight speeds...

An Introduction to Electrical Breakdown in Dielectrics

DTIC Science & Technology

1985-04-01

PROJECT TASK WORK UNIT ELEMENT NO. NO. NO. NO. 11TI TL E ’tniclude Security Classification) AN INTRODUCTION TO ELECTRICAL 1PERSONAL AUTHOR(S...find themselves working in the area without the benefit of formal coursework. inAlthough the title of the course was High Voltage Engineer- inI titled...this work , "An Introduction to Electrical Breakdown * Phenomena," because breakdown may occur at low voltages when spacecraft systems are considered

V/STOL Aerodynamics

DTIC Science & Technology

1974-10-01

jet exhaust, m (ft) Ro radius of engine exhaust, m (ft) 1. INTRODUCTION free deg S wing area, m2 (ft2) t time, see T Thrust, N (lb) u...dimensional potential flow method to lift prediction for a wing with internally blown flaps is described. INTRODUCTION The objectives of this paper are...twofold. The first is to provide an introduction to this session on research into the aerodynamics of powered high lift systems. This will be

A Flipped Mode Teaching Approach for Large and Advanced Electrical Engineering Courses

ERIC Educational Resources Information Center

Ravishankar, Jayashri; Epps, Julien; Ambikairajah, Eliathamby

2018-01-01

A fully flipped mode teaching approach is challenging for students in advanced engineering courses, because of demanding pre-class preparation load, due to the complex and analytical nature of the topics. When this is applied to large classes, it brings an additional complexity in terms of promoting the intended active learning. This paper…

15. View of the Main Office (Buildings 1, 2, and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. View of the Main Office (Buildings 1, 2, and 3), U.S. Plant Introduction Station, Glenn Dale, MD, ca. 1950. Facilities and Engineering Branch. Beltsville Agricultural Research Center, Building 426. - U.S. Plant Introduction Station, 11601 Old Pond Road, Glenn Dale, Prince George's County, MD

An Introduction to Tissue Engineering Using Hydrogels

ERIC Educational Resources Information Center

Ballyns, Jeffrey J.; Doran, Robert F.; Archer, Shivaun D.; Bonassar, Lawrence J.

2011-01-01

Biotechnology has often been a favorite topic in popular culture. While this has provided students with some introduction to the futuristic potential of biotechnology and biomedical sciences, it does not often translate to activities that will excite and stimulate them academically. In this article, the authors present a three-part classroom…

40 CFR 86.205-11 - Introduction; structure of this subpart.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES Emission Regulations for 1994 and Later Model Year Gasoline-Fueled New Light-Duty Vehicles, New Light-Duty Trucks and New Medium-Duty Passenger Vehicles; Cold Temperature Test Procedures § 86.205-11 Introduction...

40 CFR 86.205-94 - Introduction; structure of this subpart.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES Emission Regulations for 1994 and Later Model Year Gasoline-Fueled New Light-Duty Vehicles, New Light-Duty Trucks and New Medium-Duty Passenger Vehicles; Cold Temperature Test Procedures § 86.205-94 Introduction...

Stable Beginnings in Engineering Design

ERIC Educational Resources Information Center

McCormick, Mary E.; Hammer, David

2016-01-01

Novel Engineering activities are premised on the integration of engineering and literacy: students identify and engineer solutions to problems that arise for fictional characters in stories they read for class. There are advantages to this integration, for both engineering and literacy goals of instruction: the stories provide ''clients'' to…

Software engineering from a Langley perspective

NASA Technical Reports Server (NTRS)

Voigt, Susan

1994-01-01

A brief introduction to software engineering is presented. The talk is divided into four sections beginning with the question 'What is software engineering', followed by a brief history of the progression of software engineering at the Langley Research Center in the context of an expanding computing environment. Several basic concepts and terms are introduced, including software development life cycles and maturity levels. Finally, comments are offered on what software engineering means for the Langley Research Center and where to find more information on the subject.

Flipping the Classroom Applications to Curriculum Redesign for an Introduction to Management Course: Impact on Grades

ERIC Educational Resources Information Center

Albert, Michael; Beatty, Brian J.

2014-01-01

The authors discuss the application of the flipped classroom model to the redesign of an introduction to management course at a highly diverse, urban, Association to Advance Collegiate Schools of Business-accredited U.S. university. The author assessed the impact of a flipped classroom versus a lecture class on grades. Compared to the prior…

ACHP | Introduction to Section 106 Class

Science.gov Websites

? Click here. The Introduction to Section 106 is a new ACHP one-day course designed to introduce combination of small group activities and lecture to acquaint those new to Section 106 with the fundamentals Course is a one day course and meets from 8:30 a.m.- 4:30 p.m. Register and pay on-line! - Single

An Effective Introduction to Technology and Design in Norwegian Primary Education

ERIC Educational Resources Information Center

Kirkeby, Pal J.

2010-01-01

How can young pupils get "An effective introduction" to technology and design at the primary level in the Norwegian context? This question is highlighted with examples based on case studies at five classes in two schools doing their first technology and design project at grades 1 or 2 (age 6-8 years). The project was about air rockets.…

40 CFR 205.155 - Motorcycle class and manufacturer abbreviation.

Code of Federal Regulations, 2014 CFR

2014-07-01

... separate combinations of the following parameters: (1) Engine type: (i) Gasoline—two stroke. (ii) Gasoline—four stroke. (iii) Gasoline—rotary. (iv) Other. (2) Engine displacement. (3) Engine configuration: (i...

40 CFR 205.155 - Motorcycle class and manufacturer abbreviation.

Code of Federal Regulations, 2012 CFR

2012-07-01

... separate combinations of the following parameters: (1) Engine type: (i) Gasoline—two stroke. (ii) Gasoline—four stroke. (iii) Gasoline—rotary. (iv) Other. (2) Engine displacement. (3) Engine configuration: (i...

40 CFR 205.155 - Motorcycle class and manufacturer abbreviation.

Code of Federal Regulations, 2013 CFR

2013-07-01

... separate combinations of the following parameters: (1) Engine type: (i) Gasoline—two stroke. (ii) Gasoline—four stroke. (iii) Gasoline—rotary. (iv) Other. (2) Engine displacement. (3) Engine configuration: (i...

40 CFR 205.155 - Motorcycle class and manufacturer abbreviation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... separate combinations of the following parameters: (1) Engine type: (i) Gasoline—two stroke. (ii) Gasoline—four stroke. (iii) Gasoline—rotary. (iv) Other. (2) Engine displacement. (3) Engine configuration: (i...

40 CFR 205.155 - Motorcycle class and manufacturer abbreviation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... separate combinations of the following parameters: (1) Engine type: (i) Gasoline—two stroke. (ii) Gasoline—four stroke. (iii) Gasoline—rotary. (iv) Other. (2) Engine displacement. (3) Engine configuration: (i...

40 CFR 87.20 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-07-01

... POLLUTION FROM AIRCRAFT AND AIRCRAFT ENGINES Exhaust Emissions (New Aircraft Gas Turbine Engines) § 87.20 Applicability. The provisions of this subpart are applicable to all aircraft gas turbine engines of the classes...

40 CFR 87.20 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-07-01

... POLLUTION FROM AIRCRAFT AND AIRCRAFT ENGINES Exhaust Emissions (New Aircraft Gas Turbine Engines) § 87.20 Applicability. The provisions of this subpart are applicable to all aircraft gas turbine engines of the classes...

40 CFR 87.20 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... POLLUTION FROM AIRCRAFT AND AIRCRAFT ENGINES Exhaust Emissions (New Aircraft Gas Turbine Engines) § 87.20 Applicability. The provisions of this subpart are applicable to all aircraft gas turbine engines of the classes...

40 CFR 87.20 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... POLLUTION FROM AIRCRAFT AND AIRCRAFT ENGINES Exhaust Emissions (New Aircraft Gas Turbine Engines) § 87.20 Applicability. The provisions of this subpart are applicable to all aircraft gas turbine engines of the classes...

40 CFR 87.1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF AIR... turboprop engines. Class TF means all turbofan or turbojet aircraft engines or aircraft engines designed for... turbine engines employed for propulsion of aircraft designed to operate at supersonic flight speeds...

Drexel at TREC 2014 Federated Web Search Track

DTIC Science & Technology

2014-11-01

of its input RS results. 1. INTRODUCTION Federated Web Search is the task of searching multiple search engines simultaneously and combining their...or distributed properly[5]. The goal of RS is then, for a given query, to select only the most promising search engines from all those available. Most...result pages of 149 search engines . 4000 queries are used in building the sample set. As a part of the Vertical Selection task, search engines are

Advanced component technologies for energy-efficient turbofan engines

NASA Technical Reports Server (NTRS)

Saunders, N. T.

1980-01-01

The paper reviews NASA's Energy Efficient Engine Project which was initiated to provide the advanced technology base for a new generation of fuel-conservative engines for introduction into airline service by the late 1980s. Efforts in this project are directed at advancing engine component and systems technologies to a point of demonstrating technology-readiness by 1984. Early results indicate high promise in achieving most of the goals established in the project.

Life-Cycle Cost Database. Volume II. Appendices E, F, and G. Sample Data Development.

DTIC Science & Technology

1983-01-01

Bendix Field Engineering Corporation Columbia, Maryland 21045 5 CONTENTS Page GENERAL 8 Introduction Objective Engineering Survey SYSTEM DESCRIPTION...in a typical administrative type building over a 25-year period. 1.3 ENGINEERING SURVEY An on-site survey was conducted by Bendix Field Engineering...Damp Mop and Buff Buff Routine Vacuum Strip and Refinish Heavy Duty Vacuum Machine, Scrub and Surface Shampoo Pick Up Extraction Clean Repair Location

An Introduction to the Cost of Engineering and Institutional Controls at Brownfield Properties

EPA Pesticide Factsheets

This fact sheet introduces and explores the costs of site cleanup and, where cleanup leaves site contamination that restricts reuse, outlines the engineering and institutional controls and their monitoring and maintenance costs over a longer time frame.

40 CFR 86.420-78 - Engine families.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Engine families. 86.420-78 Section 86... Later New Motorcycles, General Provisions § 86.420-78 Engine families. (a) The vehicles covered in the... a separate engine family. (b) Reciprocating families. To be classed in the same engine family...

Class Projects in Physical Organic Chemistry: The Hammett Equation

NASA Astrophysics Data System (ADS)

Marrs, Peter S.

2001-04-01

This paper provides a brief introduction to the Hammett equation. A laboratory experiment is described that requires students to determine the pKa of three para-substituted phenols through the use of UV-spectroscopy. A student's individual data are combined with other students' data to provide a class set. The students analyze the class set of data to determine whether sp or sp- is more appropriate for the reaction studied, and they also determine r for the reaction.

New Architectures for Presenting Search Results Based on Web Search Engines Users Experience

ERIC Educational Resources Information Center

Martinez, F. J.; Pastor, J. A.; Rodriguez, J. V.; Lopez, Rosana; Rodriguez, J. V., Jr.

2011-01-01

Introduction: The Internet is a dynamic environment which is continuously being updated. Search engines have been, currently are and in all probability will continue to be the most popular systems in this information cosmos. Method: In this work, special attention has been paid to the series of changes made to search engines up to this point,…

Query Transformations for Result Merging

DTIC Science & Technology

2014-11-01

tors, term dependence, query expansion 1. INTRODUCTION Federated search deals with the problem of aggregating results from multiple search engines . The...invidual search engines are (i) typically focused on a particular domain or a particular corpus, (ii) employ diverse retrieval models, and (iii...determine which search engines are appropri- ate for addressing the information need (resource selection), and (ii) merging the results returned by

Comparative Analyses of Discourse in Specialized STEM School Classes

ERIC Educational Resources Information Center

Tofel-Grehl, Colby; Callahan, Carolyn M.; Nadelson, Louis S.

2017-01-01

The authors detail the discourse patterns observed within mathematics and science classes at specialized STEM (science, technology, engineering, and mathematics) high schools. Analyses reveal that teachers in mathematics classes tended to engage their students in authoritative discourse while teachers in science classes tended to engage students…

Preliminary engineering analysis for clothes washers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biermayer, Peter J.

1996-10-01

The Engineering Analysis provides information on efficiencies, manufacturer costs, and other characteristics of the appliance class being analyzed. For clothes washers, there are two classes: standard and compact. Since data were not available to analyze the compact class, only clothes washers were analyzed in this report. For this analysis, individual design options were combined and ordered in a manner that resulted in the lowest cumulative cost/savings ratio. The cost/savings ratio is the increase in manufacturer cost for a design option divided by the reduction in operating costs due to fuel and water savings.

Teaching introductory game development with unreal engine: Challenges, strategies, and experiences

NASA Astrophysics Data System (ADS)

Head, Nicholas A.

From the days of Pong to 100 million dollar projects such as the Grand Theft Auto franchise, video games have evolved significantly over the years. This evolution has also changed the way game development is viewed as a career. Today, video games are one of the most profitable forms of entertainment, and game development courses are appearing at universities around the world. Even with this growth, a degree from a university has yet to be an important factor in finding a job in game development (Owen, 2013). This thesis examines a method of creating and implementing an introductory gaming course and recommends ways to improve the curriculum. The main focus of the course was to introduce game development to the students. Each week, they were given an exercise that covered a different topic. Students also took part in a team project in which they were tasked with creating a complete game. The goal of the team projects was to expand the student's basic knowledge given to them from the exercises. Data was gathered on the students' subjective experiences with the class. This data and the class's overall performance were compared with past iterations of the course. New to the course was the Unreal Engine. Students used the latest version of the engine, Unreal Engine 4, to complete exercises. Not all students chose to use this engine for the team project. Instructor and students experiences with the engine were also recorded. While there were some problems implementing the engine within our lab environment, we were still able to execute the overall lesson plan. Even with the engine issues, the course had overall good performance. CGT 241, Introduction to 3D Animation, was shown to help the students to complete the course while CGT 215, Computer Graphics Programming I, did not provide enough information on game programming. Exercises were found to be helpful but students wanted a better understanding of how these skills can be applied to game development. Team projects also went well with most teams creating a functional project. Students wanted more time to complete projects along with a structured approach to the project. Confidence in game development and the Unreal Engine were not high but students were enthusiastic in continuing in the field of game development. Recommendations were made to the curriculum in order to fix some of the issues with the introductory course and help students find a career. In order to fix the gap between the programming course and the introductory game course, a video game programming course was recommended that focused on teaching students how code works with video game engines. An option to specialize was also recommended in order to see a higher level of understanding on game concepts and a higher level of quality of game projects. Changes to the higher courses were also made for a yearlong course where students would focus on a single project to publish. This would expand on the introductory course while also replicating the game development process.

Dealing with Differences: Taking Action on Class, Race, Gender, and Disability.

ERIC Educational Resources Information Center

Ellis, Angele; Llewellyn, Marilyn

This study/action guide was developed from a project on difference and prejudice that was implemented in a Pittsburgh (Pennsylvania) high school in 1994 and evaluated through surveys and in-depth interviews. The book provides a basic introduction to difference and prejudice organized about issues of class, race, gender, and disability in the…

How to Make a Math Modeling Class from Scratch in Six (Not-So) Easy Steps

ERIC Educational Resources Information Center

Gerhardt, Ira

2017-01-01

The recent introduction of a new course in mathematical modeling at Manhattan College has provided students with a valuable opportunity to gain practical experience utilizing tools in applying their mathematical abilities to a real-world problem. This paper describes the steps taken to create this class, from obtaining a real-world partner…

University Professors' Stress and Perceived State of Health in Relation to Teaching Schedules

ERIC Educational Resources Information Center

Cladellas, Ramon; Castello, Antoni

2011-01-01

Introduction: The aim of this research is to analyze the influence of time management, particularly in connection with university teachers' assigned class hours, on psychosocial factors relating to perceived health and stress symptoms. Special attention is given to the effect of very early and very late class hours. Method: The sample comprised…

Teaching Psychometrics in South Korea through a Reunification Attitude Scale Class Project.

ERIC Educational Resources Information Center

Webster, Sandra K.

The introduction of a team term project into a Korean psychometrics class is described. Students developed an item pool of attitude statements regarding the reunification of South Korea and North Korea. Then teams of students used the item pool to develop attitude questionnaires, survey other students, analyze the results, and recommend which…

Asynchronous Peer-to-Peer Learning: Putting Student Projects to Work in Future Classes

ERIC Educational Resources Information Center

Talley, Kimberly G.; Smith, Shaunna

2018-01-01

For instructors interested in flipping their courses or using in-class video introductions to new topics, the development of custom video lecture content can be a daunting task. Having students create videos as a term project creates the potential opportunity to engage students in peer-to-peer learning via videos while also generating course…

Continuation of Programmatic Research on Curricular Modules for Early Childhood Education and Parent Participation. Final Report.

ERIC Educational Resources Information Center

Adkins, Dorothy C.; O'Malley, J. Michael

Four projects, conducted as part of an ongoing programmatic research effort to develop and evaluate curricular modules for Head Start classes, are presented. Project A was an attempt to identify the effectiveness of an intervention approach that involved the introduction into two classes of curricula in language, mathematics, motivation, and…

A Comparison of a Traditional Lecture-Based and Online Supplemental Video and Lecture-Based Approach in an Engineering Statics Class

ERIC Educational Resources Information Center

Halupa, Colleen M.; Caldwell, Benjamin W.

2015-01-01

This quasi-experimental research study evaluated two intact undergraduate engineering statics classes at a private university in Texas. Students in the control group received traditional lecture, readings and homework assignments. Those in the experimental group also were given access to a complete set of online video lectures and videos…

Demonstration and Assessment of a Simple Viscosity Experiment for High School Science Classes

ERIC Educational Resources Information Center

Floyd­-Smith, T. M.; Kwon, K. C.; Burmester, J. A.; Dale, F. F.; Vahdat, N.; Jones, P.

2006-01-01

The demonstration of a simple viscosity experiment for high school classes was conducted and assessed. The purpose of the demonstration was to elicit the interest of high school juniors and seniors in the field of chemical engineering. The demonstration consisted of a discussion on both engineering and the concept of viscosity as well as a…

The end of the line: The relationship between New York City's subway system and residential class structure

NASA Astrophysics Data System (ADS)

Rhindress, Mindy

Public money is necessary to build and maintain this country's vast network of mass transit systems and highways. Thus you would expect class equity in choices of infrastructure location, types of projects and pricing. However, the influence of commercial interests appears to create a contradictory effect, and may negatively influence the settlement patterns where transit serves. New York City and its subway system offered the perfect case study by which to examine the before and after effects of mass transit introduction given the enormous size of the transit system and the grand development of New York City that appeared to occur simultaneous to subway inauguration. The main objective of this study was to determine the relationship between the growth of the New York City subway system and the establishment of class structure in residential patterns. Regional census data covering the first 16-year period of the subway's development was examined along with geographic statistics on subway line expansion and station openings. GIS (Geographic Information Systems) maps were used to illustrate the development of living spaces as a function of subway introduction into communities, and several Indices were computed to demonstrate the population growth and class disparity. The results revealed that the early years of transit development were entrepreneurial efforts coordinated by business interests. This led to transit first providing significant benefits mostly to the middle and upper classes, giving them a reasonable means by which to escape horrible tenement living conditions while turning a profit at the same time. Thus new settlements were stratified by class almost immediately after introduction. The cycle continued until years later when the automobile was introduced and the once expensive and luxurious, but now more reasonably priced and just functional, public transit system finally befit the population much lower on the socioeconomic scale. Class divisions still existed, but the subway's influence on this stratification decreased. The outcome of this study can provide important direction for new transportation projects that access public money by establishing guidelines to monitor business interests in new transit systems, while ensuring a fair pricing and land use policy.

40 CFR 86.004-15 - NOX plus NMHC and particulate averaging, trading, and banking for heavy-duty engines.

Code of Federal Regulations, 2013 CFR

2013-07-01

... all diesel-cycle engine families within the same primary service class is allowed. (ii) Urban buses... averaging set from all other heavy-duty engines. Averaging and trading between diesel cycle bus engine... heavy-duty engines, the equivalent mileage is 6.3 miles. For diesel heavy-duty engines, the equivalent...

40 CFR 86.004-15 - NOX plus NMHC and particulate averaging, trading, and banking for heavy-duty engines.

Code of Federal Regulations, 2014 CFR

2014-07-01

... all diesel-cycle engine families within the same primary service class is allowed. (ii) Urban buses... averaging set from all other heavy-duty engines. Averaging and trading between diesel cycle bus engine... heavy-duty engines, the equivalent mileage is 6.3 miles. For diesel heavy-duty engines, the equivalent...

7 CFR 340.3 - Notification for the introduction of certain regulated articles. 5

Code of Federal Regulations, 2010 CFR

2010-01-01

... that the introduced genetic sequences do not pose a significant risk of the creation of any new plant... AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE INTRODUCTION OF ORGANISMS AND PRODUCTS ALTERED OR PRODUCED THROUGH GENETIC ENGINEERING WHICH ARE PLANT PESTS OR WHICH THERE IS REASON TO BELIEVE...

7 CFR 340.3 - Notification for the introduction of certain regulated articles. 5

Code of Federal Regulations, 2013 CFR

2013-01-01

... that the introduced genetic sequences do not pose a significant risk of the creation of any new plant... AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE INTRODUCTION OF ORGANISMS AND PRODUCTS ALTERED OR PRODUCED THROUGH GENETIC ENGINEERING WHICH ARE PLANT PESTS OR WHICH THERE IS REASON TO BELIEVE...

7 CFR 340.3 - Notification for the introduction of certain regulated articles. 5

Code of Federal Regulations, 2014 CFR

2014-01-01

... that the introduced genetic sequences do not pose a significant risk of the creation of any new plant... AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE INTRODUCTION OF ORGANISMS AND PRODUCTS ALTERED OR PRODUCED THROUGH GENETIC ENGINEERING WHICH ARE PLANT PESTS OR WHICH THERE IS REASON TO BELIEVE...

7 CFR 340.3 - Notification for the introduction of certain regulated articles. 5

Code of Federal Regulations, 2012 CFR

2012-01-01

... that the introduced genetic sequences do not pose a significant risk of the creation of any new plant... AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE INTRODUCTION OF ORGANISMS AND PRODUCTS ALTERED OR PRODUCED THROUGH GENETIC ENGINEERING WHICH ARE PLANT PESTS OR WHICH THERE IS REASON TO BELIEVE...

7 CFR 340.3 - Notification for the introduction of certain regulated articles. 5

Code of Federal Regulations, 2011 CFR

2011-01-01

... that the introduced genetic sequences do not pose a significant risk of the creation of any new plant... AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE INTRODUCTION OF ORGANISMS AND PRODUCTS ALTERED OR PRODUCED THROUGH GENETIC ENGINEERING WHICH ARE PLANT PESTS OR WHICH THERE IS REASON TO BELIEVE...

Storing and Predicting Dynamic Attributes in a World Model Knowledge Store

DTIC Science & Technology

2007-01-01

1 INTRODUCTION ..................................................................................................................16 Motivation and...be addressed and summarily solved by future robotic engineers. 16 CHAPTER 1 INTRODUCTION The world of mobile, intelligent robotics is...Office of the Secretary of Defense charted what was then the Joint Architecture for Unmanned Ground Vehicles Working Group ( JAUGS WG). JAUGS has since

24 CFR 200.934 - User fee system for the technical suitability of products program.

Code of Federal Regulations, 2010 CFR

2010-04-01

... COMMISSIONER, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT GENERAL INTRODUCTION TO FHA PROGRAMS Minimum Property... section establishes fee requirements for the issuance of Structural Engineering Bulletins (SEBs), Mechanical Engineering Bulletins (MEBs), Truss Connector Bulletins (TCBs), Area Letters of Acceptance (ALAs...

75 FR 37842 - Notice of Issuance of Regulatory Guide

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-30

... INFORMATION CONTACT: R. A. Jervey, Regulatory Guide Development Branch, Division of Engineering, Office of...) 251-7404 or e-mail [email protected] . SUPPLEMENTARY INFORMATION: I. Introduction The U.S. Nuclear..., Regulatory Guide Development Branch, Division of Engineering, Office of Nuclear Regulatory Research. [FR Doc...

40 CFR 264.344 - Hazardous waste incinerator permits.

Code of Federal Regulations, 2010 CFR

2010-07-01

... initial introduction of hazardous waste to the incinerator and ending with initiation of the trial burn... standards of § 264.343, based on the Regional Administrator's engineering judgment. The Regional... Regional Administrator's engineering judgement. (4) For the remaining duration of the permit, the operating...

75 FR 43208 - Withdrawal of Regulatory Guide 5.17

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-23

... Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, Washington, DC 20555.... Introduction The U.S. Nuclear Regulatory Commission (NRC) is withdrawing Regulatory Guide 5.17, ``Truck... Development Branch, Division of Engineering, Office of Nuclear Regulatory Research. [FR Doc. 2010-18077 Filed...

Freshman year computer engineering students' experiences for flipped physics lab class: An action research

NASA Astrophysics Data System (ADS)

Akı, Fatma Nur; Gürel, Zeynep

2017-02-01

The purpose of this research is to determine the university students' learning experiences about flipped-physics laboratory class. The research has been completed during the fall semester of 2015 at Computer Engineering Department of Istanbul Commerce University. In this research, also known as a teacher qualitative research design, action research method is preferred to use. The participants are ten people, including seven freshman and three junior year students of Computer Engineering Department. The research data was collected at the end of the semester with the focus group interview which includes structured and open-ended questions. And data was evaluated with categorical content analysis. According to the results, students have some similar and different learning experiences to flipped education method for physics laboratory class.

Antibiotic Algae by Chemical Surface Engineering.

PubMed

Kerschgens, Isabel P; Gademann, Karl

2018-03-02

Chemical cell-surface engineering is a tool for modifying and altering cellular functions. Herein, we report the introduction of an antibiotic phenotype to the green alga Chlamydomonas reinhardtii by chemically modifying its cell surface. Flow cytometry and confocal microscopy studies demonstrated that a hybrid of the antibiotic vancomycin and a 4-hydroxyproline oligomer binds reversibly to the cell wall without affecting the viability or motility of the cells. The modified cells were used to inhibit bacterial growth of Gram-positive Bacillus subtilis cultures. Delivery of the antibiotic from the microalgae to the bacterial cells was verified by microscopy. Our studies provide compelling evidence that 1) chemical surface engineering constitutes a useful tool for the introduction of new, previously unknown functionality, and 2) living microalgae can serve as new platforms for drug delivery. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Propulsion technology needs for advanced space transportation systems. [orbit maneuvering engine (space shuttle), space shuttle boosters

NASA Technical Reports Server (NTRS)

Gregory, J. W.

1975-01-01

Plans are formulated for chemical propulsion technology programs to meet the needs of advanced space transportation systems from 1980 to the year 2000. The many possible vehicle applications are reviewed and cataloged to isolate the common threads of primary propulsion technology that satisfies near term requirements in the first decade and at the same time establish the technology groundwork for various potential far term applications in the second decade. Thrust classes of primary propulsion engines that are apparent include: (1) 5,000 to 30,000 pounds thrust for upper stages and space maneuvering; and (2) large booster engines of over 250,000 pounds thrust. Major classes of propulsion systems and the important subdivisions of each class are identified. The relative importance of each class is discussed in terms of the number of potential applications, the likelihood of that application materializing, and the criticality of the technology needed. Specific technology programs are described and scheduled to fulfill the anticipated primary propulsion technology requirements.

The Integrated Framework of College Class Activities--Using Learn Mode with the Introduction of Educational Technology as an Example

ERIC Educational Resources Information Center

Tsai, Chia-Ling; Ku, David Tawei

2014-01-01

This paper takes the undergraduate course "The Introduction of Educational Technology" as an example, and carries out the practice based on the application of Learn Mode. In Taiwan, there were plenty of attempts for the implementation of mobile learning on both elementary and high schools; yet, it has not been extended to the higher…

Learner Perceptions of the Introduction of Computer-Assisted Learning in Mathematics at a Peri-Urban School in South Africa

ERIC Educational Resources Information Center

Hartley, M. Shaheed; Treagust, David F.

2014-01-01

This study responded to a national call to improve the outcomes in mathematics in the Grade 12 matriculation examination in South Africa by reporting learners' perceptions of the introduction of computer-assisted learning in their mathematics classrooms. Three Grade 12 mathematics classes in a peri-urban school in South Africa were visited over a…

Corynebacterium glutamicum promoters: a practical approach

PubMed Central

Pátek, Miroslav; Holátko, Jiří; Busche, Tobias; Kalinowski, Jörn; Nešvera, Jan

2013-01-01

Summary Transcription initiation is the key step in gene expression in bacteria, and it is therefore studied for both theoretical and practical reasons. Promoters, the traffic lights of transcription initiation, are used as construction elements in biotechnological efforts to coordinate ‘green waves’ in the metabolic pathways leading to the desired metabolites. Detailed analyses of Corynebacterium glutamicum promoters have already provided large amounts of data on their structures, regulatory mechanisms and practical capabilities in metabolic engineering. In this minireview the main aspects of promoter studies, the methods developed for their analysis and their practical use in C. glutamicum are discussed. These include definitions of the consensus sequences of the distinct promoter classes, promoter localization and characterization, activity measurements, the functions of transcriptional regulators and examples of practical uses of constitutive, inducible and modified promoters in biotechnology. The implications of the introduction of novel techniques, such as in vitro transcription and RNA sequencing, to C. glutamicum promoter studies are outlined. PMID:23305350

Compressor Research Facility F100 High Pressure Compressor Inlet Total Pressure and Swirl Profile Simulation.

DTIC Science & Technology

1984-10-01

SECTION I INTRODUCTION 1. GENERAL -.The F100 gas turbine engine currently powers the Air Force F-15 and F-16 aircraft . The compression section of this... Aircraft in designing these vanes and screens to provide the measured engine profiles. lata acquisition system was defined and transported to Pratt and...WILLIAM W. COEHVRWALKER H. MITCHELL Compressor Test Group Chief, Technology Branch Technology Branch Turbine Engine Division Turbine Engine Division

40 CFR 1054.145 - Are there interim provisions that apply only for a limited time?

Code of Federal Regulations, 2014 CFR

2014-07-01

...-IGNITION ENGINES AND EQUIPMENT Emission Standards and Related Requirements § 1054.145 Are there interim... Phase 3 implementation for engine manufacturers. Small-volume engine manufacturers may delay complying... II engines and until 2014 for Class I engines. The running loss standards in § 1054.112 also do not...

Software engineering processes for Class D missions

NASA Astrophysics Data System (ADS)

Killough, Ronnie; Rose, Debi

2013-09-01

Software engineering processes are often seen as anathemas; thoughts of CMMI key process areas and NPR 7150.2A compliance matrices can motivate a software developer to consider other career fields. However, with adequate definition, common-sense application, and an appropriate level of built-in flexibility, software engineering processes provide a critical framework in which to conduct a successful software development project. One problem is that current models seem to be built around an underlying assumption of "bigness," and assume that all elements of the process are applicable to all software projects regardless of size and tolerance for risk. This is best illustrated in NASA's NPR 7150.2A in which, aside from some special provisions for manned missions, the software processes are to be applied based solely on the criticality of the software to the mission, completely agnostic of the mission class itself. That is, the processes applicable to a Class A mission (high priority, very low risk tolerance, very high national significance) are precisely the same as those applicable to a Class D mission (low priority, high risk tolerance, low national significance). This paper will propose changes to NPR 7150.2A, taking mission class into consideration, and discuss how some of these changes are being piloted for a current Class D mission—the Cyclone Global Navigation Satellite System (CYGNSS).

Outreach to Scientists and Engineers at the Hanford Technical Library

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buxton, Karen A.

Staff at the Hanford Technical Library has developed a suite of programs designed to help busy researchers at the Pacific Northwest National Laboratory (PNNL) make better use of library products and services. Programs include formal training classes, one-on-one consultations, and targeted email messages announcing new materials to researchers in specific fields. A staple of outreach has been to teach classes to library clients covering research tools in their fields. These classes started out in the library classroom and then expanded to other venues around PNNL. Class surveys indicated that many researchers desired a practical approach to learning rather than themore » traditional lecture format. The library instituted “Library Learning Day” and hosted classes in the PNNL computer training room to provide lab employees with a hands-on learning experience. Classes are generally offered at noon and lab staff attends classes on their lunch hour. Many just do not have time to spend a full hour in training. Library staff added some experimental half-hour mini classes in campus buildings geared to the projects and interests of researchers there to see if this format was more appealing. As other programs have developed librarians are teaching fewer classes but average attendance figures has remained fairly stable from 2005-2007. In summer of 2004 the library began the Traveling Librarian program. Librarians call-on groups and individuals in 24 buildings on the Richland Washington campus. Five full-time and two part-time librarians are involved in the program. Librarians usually send out email announcements prior to visits and encourage scientists and engineers to make appointments for a brief 15 minute consultation in the researcher’s own office. During the meeting lab staff learn about products or product features that can help them work more productively. Librarians also make cold calls to staff that do not request a consultation and may not be making full use of the library. Scientists and engineers who require longer sessions can arrange half-hour training appointments in the researcher’s own office or at the library. Since the program was implemented staff made 165 visits to 1249 laboratory staff including some repeat consultation requests. New acquisitions lists are sent to individuals and groups that would be interested in recent journal, database, and books purchases. These lists are topic specific and targeted to groups and individuals with an interest in the field. For example newly acquired engineering resources are targeted at engineering groups. The new acquisitions list for engineering began mid year in 2005. An analysis of circulation statistics for engineering books in fiscal year 2005, 2006, and 2007 show that circulation increased each year with 2007 circulation nearly double that of 2005. This took place when overall circulation rose in FY06 but fell slightly in FY07. Outreach strategies tailored and individualized can be effective. Offering multiple outreach options offers researchers different ways to interact with library staff and services.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hattemer-Frey, H.A.; Brandt, E.J.; Travis, C.C.

Commercial genetic engineering is advancing into areas that require the small-scale introduction of genetically engineered microorganisms (GEMs) to better quantify variables that affect microorganism distribution and survival and to document potential long-term consequences. A recombinant DNA marker system, the lacZY marker, developed by the Monsanto Agricultural Co., enables the distribution and fate of marked fluorescent pseudomonad organisms to be monitored under actual field conditions. Critical evaluation of GEMs under field conditions is imperative if plant-beneficial effects are to be correlated with organism release. This paper evaluates the effectiveness of this marker system and its ability to facilitate the assessment ofmore » risks associated with deliberate environmental introductions of genetically engineered microorganisms. Results of prerelease contained growth chamber and field experiments demonstrated that: (1) the scientific risk assessment methodology adopted by Monsanto and approved by the U.S. Environmental Protection Agency was appropriate and comprehensive; (2) the deliberate introduction of a GEM did not pose unacceptable or unforeseen risks to human health or the environment; (3) the lacZY marker is an effective environmental tracking tool; and (4) regulatory oversight should reflect the expected risk and not be excessively burdensome for all GEMs.« less

Profile of a Successful Civil Engineering Career in the United States Air Force.

DTIC Science & Technology

1984-09-01

Introduction ........ * * ........... 7 Career Success .. .. .. . .. . . ... 4- . .. ....... 8 Research Methods . .. . .. a.. . .. .. ............ it III...Definition of Terms I The following terms, for the purpose of this study, were defined as: Career success refers to an Air Force civil engineering officer...discussion of career success . An Air Force civil engineer is an officer currently possessing a 55XX duty Air Force . Specialty Code (AFSC). Statement of

Special issue: engineering toxins for 21st-century therapies: introduction.

PubMed

Acharya, K Ravi

2011-12-01

This special issue on 'Engineering toxins for 21st century therapies' provides a critical review of the current state of multifaceted aspects of toxin research by some of the leading researchers in the field. It also highlights the clinical potential and challenges for development of novel biologics based on engineered toxin derived products. © 2011 The Author Journal compilation © 2011 FEBS.

Manufacturing Methods and Technology Program Plan. Update.

DTIC Science & Technology

1981-11-01

INDUSTRIAL BASE ENGINEERING ACTIVITY ROCK ISLAND. ILLINOIS 61299 82 INDEX PAGE I. INTRODUCTION The MMT Program Plan Update ........... 1 Industry Guide...obtained from that Plan, extra copies of which are available upon request from the Industrial Base Engineering Activity. Other sources for this data are...Major Subcommands (SUBMACOM’S). The SUBMACOM’S plan, formulate, budget, and execute individual projects. The Industrial Base Engineering Activity

Professional Competencies Development of Competitive Bachelors in Machine Engineering

ERIC Educational Resources Information Center

Dorozhkin, Evgenij M.; Tarasyuk, Olga V.; Sinkina, Elena A.; Deryabina, Ekaterina ?.; Sisimbaeva, Valeria S.

2016-01-01

The significance of the problem being investigated is conditioned by the need of introduction of considerable amendments to academic discipline content with the objective of ensuring effective education process and professional competencies development level increase of bachelors in machine engineering necessary in their professional activities…

Introduction to Flight: An Experiment in Adult Education.

ERIC Educational Resources Information Center

Aviation/Space, 1979

1979-01-01

This is a three-day refresher course. Its intended audience is composed of personnel active in aerospace related fields, but who may not have a degree in aerospace engineering, and aerospace engineers who want to review the fundamentals of flight and gain a historical perspective. (BB)

75 FR 79049 - Notice of Issuance of Regulatory Guide

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-17

..., Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission... INFORMATION: I. Introduction The U.S. Nuclear Regulatory Commission (NRC) is issuing a revision to an existing... Development Branch, Division of Engineering, Office of Nuclear Regulatory Research. [FR Doc. 2010-31731 Filed...

78 FR 1522 - Semiannual Regulatory Agenda, Fall 2012

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-08

..., interstate movement, and environmental release of certain genetically engineered organisms and update the... of Organisms 0579-AC31 and Products Altered or Produced Through Genetic Engineering. 139 Importation..., Riverdale, MD 20737-1231, Phone: 301 851-2286. RIN: 0579-AC05 138. Introduction of Organisms and Products...

AGARD Flight Test Instrumentation Series. Volume 16. Trajectory Measurements for Take-Off and Landing Tests and Other Short-Range Applications

DTIC Science & Technology

1985-01-01

general introduction to the basic principles of flight test instrumentation engineering and is composed from contributions by several specialized authors...Required measuring accuracy 17 OPTICAL METHODS OF TRAJECTORY MEASUREMENTS 19 3.1 Introduction 19 3.2 Kinetheodolites 19 3.2.1 General principles 19...without photographic cameras 30 3.5.1 General introduction 30 3.5.2 Trajectory measurements using lasers 31 3.5.2.1 General aspects 31 3.5.2.2

Fundamental Properties of Soils for Complex Dynamic Loadings: Dynamic Constitutive Modeling of Sandy Soils.

DTIC Science & Technology

1983-04-01

1.0 INTRODUCTION AND SCOPE 1 2.0 PROGRESS SUMMARY 3 2.1 Soil Element Model Development 3 2.2 U.S. Any Engineer Waterways Experiment Station (WES...LABORATORY BEHAVIOR OF SAND 8 3.1 Introduction 8 3.2 Material Description 8 3.3 Laboratory Tests Performed 9 3.4 Laboratory Test Results 14 4.0 MODELING THE... INTRODUCTION AND SCOPE The subject of this annual report is constitutive modeling of cohesionless soil, for both laboratory standard static test conditions

Progress of teaching and learning of nuclear engineering courses at College of Engineering, Universiti Tenaga Nasional (UNITEN)

NASA Astrophysics Data System (ADS)

Hamid, Nasri A.; Mohamed, Abdul Aziz; Yusoff, Mohd. Zamri

2015-04-01

Developing human capital in nuclear with required nuclear background and professional qualifications is necessary to support the implementation of nuclear power projects in the near future. Sufficient educational and training skills are required to ensure that the human resources needed by the nuclear power industry meets its high standard. The Government of Malaysia has made the decision to include nuclear as one of the electricity generation option for the country, post 2020 in order to cater for the increasing energy demands of the country as well as to reduce CO2 emission. The commitment by the government has been made clearer with the inclusion of the development of first NPP by 2021 in the Economic Transformation Program (ETP) which was launched by the government in October 2010. The In tandem with the government initiative to promote nuclear energy, Center for Nuclear Energy, College of Engineering, Universiti Tenaga Nasional (UNITEN) is taking the responsibility in developing human capital in the area of nuclear power and technology. In the beginning, the College of Engineering has offered the Introduction to Nuclear Technology course as a technical elective course for all undergraduate engineering students. Gradually, other nuclear technical elective courses are offered such as Nuclear Policy, Security and Safeguards, Introduction to Nuclear Engineering, Radiation Detection and Nuclear Instrumentation, Introduction to Reactor Physics, Radiation Safety and Waste Management, and Nuclear Thermal-hydraulics. In addition, another course Advancement in Nuclear Energy is offered as one of the postgraduate elective courses. To enhance the capability of teaching staffs in nuclear areas at UNITEN, several junior lecturers are sent to pursue their postgraduate studies in the Republic of Korea, United States and the United Kingdom, while the others are participating in short courses and workshops in nuclear that are conducted locally and abroad. This paper describes the progress of teaching and learning in nuclear engineering and technology at UNITEN that include curriculum development, students' enrolment and performance, and teaching staff's human resource development.

STEMujeres: A case study of the life stories of first-generation Latina engineers and scientists

NASA Astrophysics Data System (ADS)

Vielma, Karina I.

Research points to the many obstacles that first-generation, Latina students face when attempting to enter fields in science, technology, engineering, and mathematics, STEM. This qualitative, case study examined the personal and educational experiences of first-generation Latina women who successfully navigated the STEM educational pipeline earning bachelor's, master's, and doctoral degrees in various fields of engineering. Three research questions guided the study: (1) How does a first-generation Latina engineer and scientist describe her life experiences as she became interested in STEM? (2) How does she describe her educational experiences as she navigated the educational pipeline in the physics, mathematics, and/or engineering field(s)? (3) How did she respond to challenges, obstacles and microaggressions, if any, while navigating the STEM educational pipeline? The study was designed using a combination of Critical Race Theory frameworks---Chicana feminist theory and racial microaggressions. Through a life history case study approach, the women shared their stories of success. With the participants' help, influential persons in their educational paths were identified and interviewed. Data were analyzed using crystallization and thematic results indicated that all women in this study identified their parents as planting the seed of interest through the introduction of mathematics. The women unknowingly prepared to enter the STEM fields by taking math and science coursework. They were guided to apply to STEM universities and academic programs by others who knew about their interest in math and science including teachers, counselors, and level-up peers---students close in age who were just a step more advanced in the educational pipeline. The women also drew from previous familial struggles to guide their perseverance and motivation toward educational degree completion. The lives of the women where complex and intersected with various forms of racism including gender, race, class, legality and power. In many instances, the women used their knowledge to help other STEMujeres advance.

Utilizing the National Research Council's (NRC) Conceptual Framework for the Next Generation Science Standards (NGSS): A Self-Study in My Science, Engineering, and Mathematics Classroom

NASA Astrophysics Data System (ADS)

Corvo, Arthur Francis

Given the reality that active and competitive participation in the 21 st century requires American students to deepen their scientific and mathematical knowledge base, the National Research Council (NRC) proposed a new conceptual framework for K--12 science education. The framework consists of an integration of what the NRC report refers to as the three dimensions: scientific and engineering practices, crosscutting concepts, and core ideas in four disciplinary areas (physical, life and earth/spaces sciences, and engineering/technology). The Next Generation Science Standards (NGSS ), which are derived from this new framework, were released in April 2013 and have implications on teacher learning and development in Science, Technology, Engineering, and Mathematics (STEM). Given the NGSS's recent introduction, there is little research on how teachers can prepare for its release. To meet this research need, I implemented a self-study aimed at examining my teaching practices and classroom outcomes through the lens of the NRC's conceptual framework and the NGSS. The self-study employed design-based research (DBR) methods to investigate what happened in my secondary classroom when I designed, enacted, and reflected on units of study for my science, engineering, and mathematics classes. I utilized various best practices including Learning for Use (LfU) and Understanding by Design (UbD) models for instructional design, talk moves as a tool for promoting discourse, and modeling instruction for these designed units of study. The DBR strategy was chosen to promote reflective cycles, which are consistent with and in support of the self-study framework. A multiple case, mixed-methods approach was used for data collection and analysis. The findings in the study are reported by study phase in terms of unit planning, unit enactment, and unit reflection. The findings have implications for science teaching, teacher professional development, and teacher education.

Teaching smartphone and microcontroller systems using "Android Java"

NASA Astrophysics Data System (ADS)

Tigrek, Seyitriza

Mobile devices are becoming indispensable tools for many students and educators. Mobile technology is starting a new era in the computing methodologies in many engineering disciplines and laboratories. Microcontroller extension that communicates with mobile devices will take the data acquisition and control process into a new level in the sensing technology and communication. The purpose of this thesis is to develop a framework to incorporate the new mobile platform with robust embedded systems into the engineering curriculum. For this purpose a course material is developed "Introduction to Programming Java on a Mobile Platform" to teach novice programmers how to create applications, specifically on Android. Combining an introductory level programming class with the Android platform can appeal to non-programming individuals in multiple disciplines. The proposed course curriculum reduces the learning time, and allows senior engineering students to use the new framework for their specific needs in the labs such as mobile data acquisition and control projects. This work provides techniques for instructors with modest programming background to teach cutting edge technology, which is smartphone programming. Techniques developed in this work minimize unnecessary information carried into current teaching approaches with hands-on practice. It also helps the students with minimal background requirements overcome the barriers that have evolved around computer programming. The motivation of this thesis is to create a tailored programming introductory course to teach Java programming on Android by incorporating selected efficient methods from extant literature. The mechanism proposed in this thesis is to keep students motivated by an active approach based on student-centered learning with collaborative work. Teamwork through pair programming is adapted in this teaching process. Bloom's taxonomy, along with a knowledge survey, is used as a guide to classify the information and exercise problems. A prototype curriculum is a deliverable of this research that is suitable for novice programmers-such as engineering freshmen students. It also contains advanced material that allows senior students to use mobile phone and a microcontroller system to enhance engineering laboratories.

Design study of a kinematic Stirling engine for dispered solar electric power systems

NASA Technical Reports Server (NTRS)

1980-01-01

The concept evaluation shows that the four cylinder double acting U type Stirling engine with annular regenerators is the most suitable engine type for the 15 kW solar application with respect to design, performance and cost. Results show that near term performance for a metallic Stirling engine is 42% efficiency. Further improved components show an impact on efficiency of the future metallic engine to 45%. Increase of heater temperature, through the introduction of ceramic components, contribute the greatest amount to achieve high efficiency goals. Future ceramic Stirling engines for solar applications show an efficiency of around 50%.

The Impact of Adding Online Homework Assignments to an Introduction to Physical Geology Class

NASA Astrophysics Data System (ADS)

Brevik, Eric C.

2017-04-01

As instructors we are constantly looking for ways to improve student performance in the classroom. In an attempt to improve student performance in my GEOL 105 - Introduction to Physical Geology class, I added online homework assignments from the Pearson Mastering Geology program beginning in the Fall semester of 2014. There were several anticipated advantages to the online homework approach. If a student is struggling with a question they can get hints that don't tell them the answer, but are designed to stimulate their thinking and lead them towards the correct answer. The students also know immediately after submitting their answers which questions they got right and which were wrong, and they can go back to the wrong answers and try to determine the correct answer so they know what it is. This gives them much more rapid feedback than traditional paper homework, all of which makes this a more student-centered approach to learning. It is also my hope that the students find the online homework more interesting and interactive than paper-based homework, which I hope in turn will stimulate the students to be more likely to do the homework and take it seriously while also having some fun while doing it. As of the end of Fall semester 2016, I had been using the online homework assignments in my classes for three years. Therefore, I analyzed student performance in the three years prior to adopting the online homework and compared it to performance over the three years since adopting online homework. In the three years prior to adopting the online homework, the average grade in my classes was 73.8%; afterwards the average grade was 81.3%, for an improvement of 7.5% on average. Most of that improvement was in average test scores, which increased by 6.3% (67.4% prior to 73.6% after). The online homework did not improve the performance of the top students, but it did improve the performance of the other students. Prior to adopting the online homework, grade distribution in the class was 15% A (90-100% scores), 32% B (80-90%), 19% C (70-80%), 19% D (60-79%), and 15% F (<60%). After adopting the online homework, the grade distribution was 13% A, 48% B, 24% C, 13% D, and 2% F. Therefore, students who either passed the class but didn't excel or who struggled with the class prior to online homework adoption saw improvements in their performance, while students who showed truly outstanding performance remained constant. Test grades showed a similar trend. The average test scores for those who received an A in the class were 88.0% prior to and 88.6% after adopting the online homework, while test averages for students who received less than an A were 63.9% prior to and 71.4% (7.5% improvement) after adopting the online homework. I am always making small changes to my classes in an effort to improve them, but the only major change made to the class over the time period covered in this study was replacing paper homework assignments (which were not graded) with the online homework assignments. In addition, there was no statistical difference in scores in the Introduction to Physical Geology Laboratory over the same period (87.8% average before adoption, 85.7% after adoption). Students are required to take the lecture and laboratory at the same time, so the student populations were identical. The online homework applied to the lecture, where grades improved, but not to the laboratory, where grades remained consistent. Therefore, it was concluded that the addition of online homework to the Introduction to Physical Geology class had a strong positive effect on student scores. While students who would excel regardless of the format (those who received A grades) showed the same performance under both class formats, those who fell farther down the grade scale showed significant improvement with the use of the online homework assignments. Acknowledgement The integration of online homework assignments into the Introduction to Physical Geology class was funded by a Summer Faculty Fellowship from the North Dakota Space Grant Consortium.

Constructing engineers through practice: Gendered features of learning and identity development

NASA Astrophysics Data System (ADS)

Tonso, Karen L.

How do women and men student engineers develop an engineering identity (a sense of belonging, or not), while practicing "actual" engineering? What are the influences of gender, learning and knowledge, relations of power, and conceptions of equality on cultural identity development? I studied these issues in reform-minded engineering design classes, courses organized around teaching students communications, teamwork, and practical engineering. Engineering-student cultural identity categories revealed a status hierarchy, predicated on meeting "academic" criteria for excellence, and the almost total exclusion of women. While working as an engineering colleague on five student teams (three first-year and two senior) and attending their design classes, I documented how cultural identities were made evident and constructed in students' practical engineering. Design projects promoted linking academic knowledge with real-world situations, sharing responsibilities and trusting colleagues, communicating engineering knowledge to technical and non-technical members of business communities, and addressing gaps in students' knowledge. With a curriculum analysis and survey of students' perceptions of the differences between design and conventional courses, I embedded the design classes in the wider campus and found that: (1) Engineering education conferred prestige, power, and well-paying jobs on students who performed "academic" engineering, while failing to adequately encourage "actual" engineering practices. High-status student engineers were the least likely to perform "actual" engineering in design teams. (2) Engineering education advanced an ideology that encouraged its practitioners to consider men's privilege and women's invisibility normal. By making "acting like men act" the standards to which engineering students must conform, women learned to put up with oppressive treatment. Women's accepting their own mistreatment and hiding their womanhood became a condition of women's belonging. (3) Despite all of the pressures to do otherwise, (some) teams of students (at all levels) carved out small oases where "actual" engineering prevailed and women's participation was robust. Students--not faculty, not progressive pedagogy, not "reformed" courses--disrupted prevailing norms. However, two women engineering students, one on each senior team, performed fabulous "actual" engineering, yet neither of them had a job when they graduated--the only two senior students on my teams without jobs.

Fitting in and feeling good: the relationships among peer alignment, instructor connectedness, and self-efficacy in undergraduate satisfaction with engineering

NASA Astrophysics Data System (ADS)

Micari, Marina; Pazos, Pilar

2016-07-01

This study examined the relationships among peer alignment (the feeling that one is similar in important ways to one's engineering peers), instructor connectedness (the sense that one knows and looks up to academic staff/faculty members in the department), self-efficacy for engineering class work (confidence in one's ability to successfully complete engineering class work), and engineering students' satisfaction with the major. A total of 135 sophomore (second-year university students) and junior (third-year students) engineering students were surveyed to measure these three variables. A multiple regression analysis showed that self-efficacy, peer alignment, and instructor connectedness predicted student satisfaction with the major, and that self-efficacy acted as a mediator between both peer alignment and instructor connectedness on the one hand, and satisfaction on the other. The authors offer suggestions for practice based on the results.

41 CFR 102-192.40 - Where can we obtain more information about the classes of mail?

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROGRAMS 192-MAIL MANAGEMENT Introduction to this Part § 102-192.40 Where can we obtain more information... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Where can we obtain more information about the classes of mail? 102-192.40 Section 102-192.40 Public Contracts and Property Management...

The Use of Web-Based Portfolios in College Physical Education Activity Courses

ERIC Educational Resources Information Center

Hastie, Peter A.; Sinelnikov, Oleg A.

2007-01-01

This paper describes the introduction of web-based portfolios as a means of authentic assessment in collegiate physical education classes. Students in three volleyball classes were required to contribute to web-based team portfolios, and at the end of the semester, were able to make comment upon this process. A six-item on-line survey used to…

[Experimental Course in Elementary Number Theory, Cambridge Conference on School Mathematics Feasibility Study No. 35.

ERIC Educational Resources Information Center

Hatch, Mary Jacqueline

In the winter of 1965, an experimental course in Elementary Number Theory was presented to a 6th grade class in the Hosmer School, Watertown, Massachusetts. Prior to the introduction of the present material, students had been exposed in class to such topics from the University of Illinois Arithmetic Project as lattices, number lines, frame…

Novices on the Net: An Introduction to Education Class Uses E-Mail and the Internet.

ERIC Educational Resources Information Center

Corl, Susan F.

In order to offer computer and/or technology instruction to their education students before they transfer to four-year colleges, Louisiana State University at Eunice (LSUE), a two-year college, added a computer component to an introductory education class. The component introduces pre-service teachers to electronic mail and the Internet in order…

Seeking Effectiveness and Equity in a Large College Chemistry Course: An HLM Investigation of Peer-Led Guided Inquiry

ERIC Educational Resources Information Center

Lewis, Scott E.; Lewis, Jennifer E.

2008-01-01

This study employed hierarchical linear models (HLM) to investigate Peer-Led Guided Inquiry (PLGI), a teaching practice combining cooperative learning and inquiry and tailored for a large class. Ultimately, the study provided an example of the effective introduction of a reform pedagogical approach in a large class setting. In the narrative, the…

Seeing the Forest of Information for the Trees of Papers: An Information Literacy Case Study in a Geography/Geology Class

ERIC Educational Resources Information Center

Blake, Linda; Warner, Tim

2011-01-01

After receiving a mini-grant for developing integrated information literacy programs, a Geography/Geology Department faculty member worked with the Science Librarian to embed information literacy in a cross-listed geology and geography course, Geog/Geol 455, Introduction to Remote Sensing. Planning for the revisions to the class started with…

Using a Personal Response System as an In-Class Assessment Tool in the Teaching of Basic College Chemistry

ERIC Educational Resources Information Center

Chen, Tzy-Ling; Lan, Yu-Li

2013-01-01

Since the introduction of personal response systems (PRS) (also referred to as "clickers") nearly a decade ago, their use has been extensively adopted on college campuses, and they are particularly popular with lecturers of large classes. Available evidence supports that PRS offers a promising avenue for future developments in pedagogy,…

Effectively Serving the Needs of Today's Business Student: The Product Life Cycle Approach to Class Organization

ERIC Educational Resources Information Center

Eastman, Jacqueline K.; Aviles, Maria; Hanna, Mark

2012-01-01

We illustrate a class organization process utilizing the concept of the Product Life Cycle to meet the needs of today's millennial student. In the Introduction stage of a business course, professors need to build structure to encourage commitment. In the Growth stage, professors need to promote the structure through multiple, brief activities that…

Internet Power Searching: The Advanced Manual. 2nd Edition. Neal-Schuman NetGuide Series.

ERIC Educational Resources Information Center

Bradley, Phil

This handbook provides information on how Internet search engines and related software and utilities work and how to use them in order to improve search techniques. The book begins with an introduction to the Internet. Part 1 contains the following chapters that cover mining the Internet for information: "An Introduction to Search…

Engineering Encounters: Elephant Trunks and Dolphin Tails

ERIC Educational Resources Information Center

Hefty, Lukas

2014-01-01

This article describes how one class at Douglas Jamerson Elementary School in St. Petersburg, Florida, a center for engineering and mathematics, incorporated an Engineering Design Process into its curriculum. At Jamerson Elementary, all students in kindergarten through fifth grade engage in teacher-created, integrated engineering units of study,…

An Engineer Does What Now?

ERIC Educational Resources Information Center

Gilbert, Amy; Wade, Katherine

2014-01-01

For an introductory engineering class at an all-girls urban high school in the Southeast, the authors planned an experience that would align with the engineering aspects of the "Next Generation Science Standards" (NGSS Lead States 2013). The goal was to better relate science, technology, engineering, and mathematics (STEM) to everyday…

14 CFR 34.10 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-01-01

... EXHAUST EMISSION REQUIREMENTS FOR TURBINE ENGINE POWERED AIRPLANES Engine Fuel Venting Emissions (New and In-Use Aircraft Gas Turbine Engines) § 34.10 Applicability. (a) The provisions of this subpart are applicable to all new aircraft gas turbine engines of classes T3, T8, TSS, and TF equal to or greater than 36...

14 CFR 34.10 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-01-01

... EXHAUST EMISSION REQUIREMENTS FOR TURBINE ENGINE POWERED AIRPLANES Engine Fuel Venting Emissions (New and In-Use Aircraft Gas Turbine Engines) § 34.10 Applicability. (a) The provisions of this subpart are applicable to all new aircraft gas turbine engines of classes T3, T8, TSS, and TF equal to or greater than 36...

14 CFR 34.10 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-01-01

... EXHAUST EMISSION REQUIREMENTS FOR TURBINE ENGINE POWERED AIRPLANES Engine Fuel Venting Emissions (New and In-Use Aircraft Gas Turbine Engines) § 34.10 Applicability. (a) The provisions of this subpart are applicable to all new aircraft gas turbine engines of classes T3, T8, TSS, and TF equal to or greater than 36...

An Analysis of the Influence of some External Disturbances on the Aerodynamic Stability of Turbine Engine Axial Flow Fans and Compressors

DTIC Science & Technology

1977-08-01

237 265 X A E DC-T R-77-80 CHAPTER I INTRODUCTION Stable aerodynamic operation of the compression system of an aircraft gas turbine engine is...of an aircraft gas turbine engine consists of one or more compressors arranged in configurations such as those illustrated in Fig. 1 (Appendix A). 1...difficulties in the operation of several aircraft gas turbine engines which have been experienced because of compressor stability problems. Montgomery’s

Development of a Noninterference Technique for Measurement of Turbine Engine Compressor Blade Stress

DTIC Science & Technology

1980-06-01

TECHNIQUE FOR MEASUREMENT OF TURBINE ENGINE COMPRESSOR BLADE STRESS 7 A U T H O R ( s ) P . E. M c C a r t y a n d J . W. Thompson , J r...e a e a ~ and tdentJ~ by b|ock numbe~ A noninterference technique for measuring stress in compressor blades of turbine engines is being developed...43 4 AEDC-TR-79-78 1.0 INTRODUCTION 1.1 BACKGROUND Compressor rotor blades in turbojet engines are subjected to

An Appraisal of a Number of Power Assessment Procedures being Proposed for Use in Chinook-Lycoming T55 Engine

DTIC Science & Technology

1989-02-01

WHICH WILL NOT BE ADDED TO THE DISTIS DATA UNLESS SPECIFICA.LLY REQUESTED. 16. ABSTRACT (CONT.) control ( FADEC ) to the T55-Lll engine. This latter...the Power Assurance Test (PAT) proposed in conjunction with the retrofitting of a full authority digital engine control ( FADEC ) to the T55-Lll engine...Research Laboratory, P.Q. Bcx 4331, felbourne, Victoria, 3001, A..sLralia CONTENTS Page NOMENCLATURE 1.0 INTRODUCTION ........................ 1 2.0 FADEC

The Algebra of Complex Numbers.

ERIC Educational Resources Information Center

LePage, Wilbur R.

This programed text is an introduction to the algebra of complex numbers for engineering students, particularly because of its relevance to important problems of applications in electrical engineering. It is designed for a person who is well experienced with the algebra of real numbers and calculus, but who has no experience with complex number…

A Design-Based Engineering Graphics Course for First-Year Students.

ERIC Educational Resources Information Center

Smith, Shana Shiang-Fong

2003-01-01

Describes the first-year Introduction to Design course at Iowa State University which incorporates design for manufacturing and concurrent engineering principles into the curriculum. Autodesk Inventor was used as the primary CAD tool for parametric solid modeling. Test results show that student spatial visualization skills were dramatically…

Slope Stability. CEGS Programs Publication Number 15.

ERIC Educational Resources Information Center

Pestrong, Raymond

Slope Stability is one in a series of single-topic problem modules intended for use in undergraduate and earth science courses. The module, also appropriate for use in undergraduate civil engineering and engineering geology courses, is a self-standing introduction to studies of slope stability. It has been designed to supplement standard…

DIALOG for Electrical Engineers. CTHB Publikation Nr 29 (1982).

ERIC Educational Resources Information Center

Fjallbrant, Nancy

This manual provides electrical and electronic engineers with an introduction to online information retrieval as implemented on the DIALOG information retrieval system. Sections cover: (1) the development of computerized information retrieval; (2) its advantages; (3) the equipment needed, DIALOG hours of availability, methods of access, and cost…

DOE Office of Scientific and Technical Information (OSTI.GOV)

None Available

To make the web work better for science, OSTI has developed state-of-the-art technologies and services including a deep web search capability. The deep web includes content in searchable databases available to web users but not accessible by popular search engines, such as Google. This video provides an introduction to the deep web search engine.

Basic Drafting: Book One.

ERIC Educational Resources Information Center

Davis, Ronald; And Others

The first of a two-book course in drafting, this manual consists of 13 topics in the following units: introduction to drafting, general safety, basic tools and lines, major equipment, applying for a job, media, lettering, reproduction, drawing sheet layout, architect's scale usage, civil engineer's scale usage, mechanical engineer's scale usage,…

Extending Engineering Design Graphics Laboratories to Have a CAD/CAM Component: Implementation Issues.

ERIC Educational Resources Information Center

Juricic, Davor; Barr, Ronald E.

1996-01-01

Reports on a project that extended the Engineering Design Graphics curriculum to include instruction and laboratory experience in computer-aided design, analysis, and manufacturing (CAD/CAM). Discusses issues in project implementation, including introduction of finite element analysis to lower-division students, feasibility of classroom prototype…

General Mechanical Repair. Minor Automotive Maintenance. Volume 1. Teacher's Guide.

ERIC Educational Resources Information Center

East Texas State Univ., Commerce. Occupational Curriculum Lab.

Fourteen units on minor automotive maintenance are presented in this teacher's guide. The units are the following: introduction to minor automotive maintenance, shop safety, engine principles, fuel system operation and repair, electrical system, ignition system, lubrication system, engine cooling system, exhaust system, wheel bearings and tires,…

Software Engineering Laboratory (SEL) data base reporting software user's guide and system description. Volume 1: Introduction and user's guide

NASA Technical Reports Server (NTRS)

1983-01-01

Reporting software programs provide formatted listings and summary reports of the Software Engineering Laboratory (SEL) data base contents. The operating procedures and system information for 18 different reporting software programs are described. Sample output reports from each program are provided.

Engineer Equipment Operator.

ERIC Educational Resources Information Center

Marine Corps Inst., Washington, DC.

This student guide, one of a series of correspondence training courses designed to improve the job performance of members of the Marine Corps, deals with the skills needed by engineer equipment operators. Addressed in the seven individual units of the course are the following topics: introduction to Military Occupation Specialty (MOS) 1345…

Issues in Engineering Self-Aware and Self-Expressive Ensembles

NASA Astrophysics Data System (ADS)

Hölzl, Matthias; Wirsing, Martin

The following sections are included: * Introduction * Classifying Awareness and Self-Expression * Elements of the awareness mechanism * A white-box definition of awareness * Self-expression * A black-box definition of awareness * Awareness Engineering * Socio-Technical Issues * Privacy, ownership and control of data * Discrimination and responsibility * Failuremodes * Summary and Conclusions

76 FR 50275 - Guidance for the Assessment of Beyond-Design-Basis Aircraft Impacts

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-12

...: Mekonen M. Bayssie, Regulatory Guide Development Branch, Division of Engineering, Office of Nuclear... e-mail to [email protected] . SUPPLEMENTARY INFORMATION: I. Introduction The Nuclear..., Division of Engineering, Office of Nuclear Regulatory Research. [FR Doc. 2011-20513 Filed 8-11-11; 8:45 am...

40 CFR 89.322 - Carbon dioxide analyzer calibration.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Test Equipment Provisions § 89.322 Carbon dioxide analyzer calibration. (a) Prior to its introduction... requirements of paragraph (a)(3) of this section. Proceed as follows: (1) Follow good engineering practices for... engineering practice. For each range calibrated, if the deviation from a least-squares best-fit straight line...

The VLAB OER Experience: Modeling Potential-Adopter Student Acceptance

ERIC Educational Resources Information Center

Raman, Raghu; Achuthan, Krishnashree; Nedungadi, Prema; Diwakar, Shyam; Bose, Ranjan

2014-01-01

Virtual Labs (VLAB) is a multi-institutional Open Educational Resources (OER) initiative, exclusively focused on lab experiments for engineering education. This project envisages building a large OER repository, containing over 1650 virtual experiments mapped to the engineering curriculum. The introduction of VLAB is a paradigm shift in an…

78 FR 7430 - Sunshine Act Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-01

... at 10:30 a.m. in Room TW-C305, at 445 12th Street SW., Washington, DC. 1 Office of Engineering... Review of Telecommunications Regulations--Part 2 Administered by the Office of Engineering and Technology... accelerate innovation and promote the introduction of new products, including medical devices, to the...

75 FR 16525 - Notice of Issuance of Regulatory Guide

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-01

... CONTACT: Mekonen M. Bayssie, Regulatory Guide Development Branch, Division of Engineering, Office of...) 251-7489 or e-mail [email protected] . SUPPLEMENTARY INFORMATION: I. Introduction The U.S..., Division of Engineering, Office of Nuclear Regulatory Research. [FR Doc. 2010-7391 Filed 3-31-10; 8:45 am...

40 CFR 86.1505 - Introduction; structure of subpart.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations for Otto-Cycle Heavy-Duty Engines, New Methanol-Fueled Natural Gas-Fueled, and Liquefied Petroleum Gas-Fueled Diesel-Cycle Heavy-Duty Engines, New Otto-Cycle Light-Duty Trucks, and New Methanol-Fueled Natural Gas-Fueled, and Liquefied Petroleum Gas-Fueled Diesel-Cycle Light-Duty Trucks; Idle Test...

Professional Language in Engineering Education

ERIC Educational Resources Information Center

Zascerinska, Jelena

2010-01-01

Introduction: The use of 3-5 languages that involves professional language to form varied cooperative networks for the creation of new knowledge is of the greatest importance for the development of humans, institutions and society (Maslo, 2006). Aim of the Study: To identify and analyze professional language in engineering education on the…

Highway Safety Program Manual: Volume 13: Traffic Engineering Services.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 13 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on traffic engineering services. The introduction outlines the purposes and objectives of Highway Safety Program Standard 13 and the Highway Safety Program Manual. Program development and…

Implementation of an Industrial-Based Case Study as the Basis for a Design Project in an Introduction to Mechanical Design Course

ERIC Educational Resources Information Center

Lackey, Ellen

2011-01-01

The purpose of this paper is to discuss the implementation of an industrial-based case study as the basis for a design project for the Spring 2009 Introduction to Mechanical Design Course at the University of Mississippi. Course surveys documented the lack of student exposure in classes to the types of projects typically experienced by engineers…

Introduction to Concepts in Artificial Neural Networks

NASA Technical Reports Server (NTRS)

Niebur, Dagmar

1995-01-01

This introduction to artificial neural networks summarizes some basic concepts of computational neuroscience and the resulting models of artificial neurons. The terminology of biological and artificial neurons, biological and machine learning and neural processing is introduced. The concepts of supervised and unsupervised learning are explained with examples from the power system area. Finally, a taxonomy of different types of neurons and different classes of artificial neural networks is presented.

40 CFR 1054.740 - What special provisions apply for generating and using emission credits?

Code of Federal Regulations, 2011 CFR

2011-07-01

...) × (Avg. Power) × (Avg. UL) × (LF) ×(10−3) Where: Emissions Delta = 1.6 g/kW-hr for Class I and 2.1 g/kW... volumes. Avg. Power = the production-weighted average value of the maximum modal power for all your engine families in the engine class, as described in § 1054.705(a), in kilowatts. Avg. UL = the production...

Introduction to bioengineering: melding of engineering and biological sciences.

PubMed

Shoureshi, Rahmat A

2005-04-01

Engineering has traditionally focused on the external extensions of organisms, such as transportation systems, high-rise buildings, and entertainment systems. In contrast, bioengineering is concerned with inward processes of biologic organisms. Utilization of engineering principles and techniques in the analysis and solution of problems in medicine and biology is the basis for bioengineering. This article discusses subspecialties in bioengineering and presents examples of projects in this discipline.

Automating Software Design Metrics.

DTIC Science & Technology

1984-02-01

INTRODUCTION 1 ", ... 0..1 1.2 HISTORICAL PERSPECTIVE High quality software is of interest to both the software engineering com- munity and its users. As...contributions of many other software engineering efforts, most notably [MCC 77] and [Boe 83b], which have defined and refined a framework for quantifying...AUTOMATION OF DESIGN METRICS Software metrics can be useful within the context of an integrated soft- ware engineering environment. The purpose of this

Introduction of interdisciplinary teaching: two case studies : commentary on "teaching science, technology, and society to engineering students: a sixteen year journey".

PubMed

Spitzer, Hartwig

2013-12-01

Interdisciplinary courses on science, engineering and society have been successfully established in two cases, at Bilkent University, Ankara, Turkey, and at the University of Hamburg, Germany. In both cases there were institutional and perceptual barriers that had to be overcome in the primarily disciplinary departments. The ingredients of success included a clear vision of interdisciplinary themes and didactics, and the exploitation of institutional opportunities. Haldun M. Ozaktas in Ankara used the dynamics of an accreditation process to establish courses on engineering and society. At the University of Hamburg the introduction of optional courses into all curricula allowed for the establishment of a seminar series on physics and society, as well as on peace education and peace building. Both of these approaches have a weakness in common: the courses can disappear once their initiators have left, unless the interdisciplinary themes are integrated into compulsory core curricula.

14 CFR 61.107 - Flight proficiency.

Code of Federal Regulations, 2010 CFR

2010-01-01

...-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport and seaplane... lighter-than-air category rating with an airship class rating: (i) Preflight preparation; (ii) Preflight...

14 CFR 61.107 - Flight proficiency.

Code of Federal Regulations, 2013 CFR

2013-01-01

...-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport and seaplane... lighter-than-air category rating with an airship class rating: (i) Preflight preparation; (ii) Preflight...

14 CFR 61.107 - Flight proficiency.

Code of Federal Regulations, 2012 CFR

2012-01-01

...-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport and seaplane... lighter-than-air category rating with an airship class rating: (i) Preflight preparation; (ii) Preflight...

14 CFR 61.107 - Flight proficiency.

Code of Federal Regulations, 2011 CFR

2011-01-01

...-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport and seaplane... lighter-than-air category rating with an airship class rating: (i) Preflight preparation; (ii) Preflight...

14 CFR 61.107 - Flight proficiency.

Code of Federal Regulations, 2014 CFR

2014-01-01

...-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport and seaplane... lighter-than-air category rating with an airship class rating: (i) Preflight preparation; (ii) Preflight...

Preparation guide for class B software specification documents

NASA Technical Reports Server (NTRS)

Tausworthe, R. C.

1979-01-01

General conceptual requirements and specific application rules and procedures are provided for the production of software specification documents in conformance with deep space network software standards and class B standards. Class B documentation is identified as the appropriate level applicable to implementation, sustaining engineering, and operational uses by qualified personnel. Special characteristics of class B documents are defined.

An Exact Efficiency Formula for Holographic Heat Engines

DOE PAGES

Johnson, Clifford

2016-03-31

Further consideration is given to the efficiency of a class of black hole heat engines that perform mechanical work via the pdV terms present in the First Law of extended gravitational thermodynamics. It is noted that, when the engine cycle is a rectangle with sides parallel to the (p,V) axes, the efficiency can be written simply in terms of the mass of the black hole evaluated at the corners. Since an arbitrary cycle can be approximated to any desired accuracy by a tiling of rectangles, a general geometrical algorithm for computing the efficiency of such a cycle follows. Finally, amore » simple generalization of the algorithm renders it applicable to broader classes of heat engine, even beyond the black hole context.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Exercise environment for Introduction to Cyber Technologies class. This software is essentially a collection of short scripts, configuration files, and small executables that form the exercise component of the Sandia Cyber Technologies Academy's Introduction to Cyber Technologies class. It builds upon other open-source technologies, such as Debian Linux and minimega, to provide comprehensive Linux and networking exercises that make learning these topics exciting and fun. Sample exercises: a pre-built set of home directories the student must navigate through to learn about privilege escalation, the creation of a virtual network playground designed to teach the student about the resiliency of themore » Internet, and a two-hour Capture the Flag challenge for the final lesson. There are approximately thirty (30) exercises included for the students to complete as part of the course.« less

Constellation Program Design Challenges as Opportunities for Educational Outreach and Workforce Development for Senior Design Classes

NASA Technical Reports Server (NTRS)

Trevino, Robert C.

2009-01-01

The Texas Space Grant Consortium (TSGC) and the Exploration Systems Mission Directorate (ESMD) both have programs that present design challenges for university senior design classes that offer great opportunities for educational outreach and workforce development. These design challenges have been identified by NASA engineers and researchers as real design problems faced by the Constellation Program in its exploration missions and architecture. Student teams formed in their senior design class select and then work on a design challenge for one or two semesters. The senior design class follows the requirements set by their university, but it must also comply with the Accreditation Board for Engineering and Technology (ABET) in order to meet the class academic requirements. Based on a one year fellowship at a TSGC university under the NASA Administrator's Fellowship Program (NAFP) and several years of experience, results and metrics are presented on the NASA Design Challenge Program.

40 CFR 1048.615 - What are the provisions for exempting engines designed for lawn and garden applications?

Code of Federal Regulations, 2010 CFR

2010-07-01

... certificate of conformity showing that it meets emission standards for Class II engines under 40 CFR part 90... requirements and restrictions of 40 CFR part 90 or 1054 apply to anyone manufacturing these engines, anyone manufacturing equipment that uses these engines, and all other persons in the same manner as if these engines...

"We Must Have Writers": An Introduction to the Narrative Rhetorical Theory of Meridel LeSueur.

ERIC Educational Resources Information Center

Allen, Julia M.

This paper examines the life and works of Meridel LeSueur, a colleague of Kenneth Burke, and herself a radical writer during the 1920s and 1930s. The paper states that LeSueur's primary aim was to establish an indigenous working-class culture to support working-class action. It notes that her arguments about writing build upon the rhetorical…

14 CFR 61.127 - Flight proficiency.

Code of Federal Regulations, 2010 CFR

2010-01-01

... a single-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport...; and (xi) Postflight procedures. (7) For a lighter-than-air category rating with an airship class...

14 CFR 61.127 - Flight proficiency.

Code of Federal Regulations, 2012 CFR

2012-01-01

... a single-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport...; and (xi) Postflight procedures. (7) For a lighter-than-air category rating with an airship class...

14 CFR 61.127 - Flight proficiency.

Code of Federal Regulations, 2014 CFR

2014-01-01

... a single-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport...; and (xi) Postflight procedures. (7) For a lighter-than-air category rating with an airship class...

14 CFR 61.127 - Flight proficiency.

Code of Federal Regulations, 2013 CFR

2013-01-01

... a single-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport...; and (xi) Postflight procedures. (7) For a lighter-than-air category rating with an airship class...

14 CFR 61.127 - Flight proficiency.

Code of Federal Regulations, 2011 CFR

2011-01-01

... a single-engine class rating: (i) Preflight preparation; (ii) Preflight procedures; (iii) Airport...; and (xi) Postflight procedures. (7) For a lighter-than-air category rating with an airship class...

40 CFR 87.10 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., manufactured on or after January 1, 1974, and to all in-use aircraft gas turbine engines of classes T3, T8, TSS... POLLUTION FROM AIRCRAFT AND AIRCRAFT ENGINES Engine Fuel Venting Emissions (New and In-Use Aircraft Gas Turbine Engines) § 87.10 Applicability. (a) The provisions of this subpart are applicable to all new...

40 CFR 87.10 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., manufactured on or after January 1, 1974, and to all in-use aircraft gas turbine engines of classes T3, T8, TSS... POLLUTION FROM AIRCRAFT AND AIRCRAFT ENGINES Engine Fuel Venting Emissions (New and In-Use Aircraft Gas Turbine Engines) § 87.10 Applicability. (a) The provisions of this subpart are applicable to all new...

40 CFR 87.10 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., manufactured on or after January 1, 1974, and to all in-use aircraft gas turbine engines of classes T3, T8, TSS... POLLUTION FROM AIRCRAFT AND AIRCRAFT ENGINES Engine Fuel Venting Emissions (New and In-Use Aircraft Gas Turbine Engines) § 87.10 Applicability. (a) The provisions of this subpart are applicable to all new...

40 CFR 87.10 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., manufactured on or after January 1, 1974, and to all in-use aircraft gas turbine engines of classes T3, T8, TSS... POLLUTION FROM AIRCRAFT AND AIRCRAFT ENGINES Engine Fuel Venting Emissions (New and In-Use Aircraft Gas Turbine Engines) § 87.10 Applicability. (a) The provisions of this subpart are applicable to all new...

Group by Subject or by Ability? Tertiary Mathematics for Engineering Students

ERIC Educational Resources Information Center

Plank, Michael; James, Alex; Hannah, John

2011-01-01

The mathematics topics taught to engineering students at university are ostensibly no different to those taught to mathematics majors, so should these students be taught together or separately? Should engineering students be segregated by ability in their mathematics classes? This study analyses the grades of over 1000 engineering students, and…

NNSA Nonproliferation Graduate Fellowship Program Annual Report June 2008 - May 2009

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berkman, Clarissa O.; Fankhauser, Jana G.

2010-03-01

In 2009, the Nonproliferation Graduate Fellowship Program (NGFP) completed its 16th successful year in support of the NNSA’s mission by developing future leaders in nonproliferation and promoting awareness of career opportunities. We provide this annual report to review program activities from June 2008 through May 2009 - the fellowship term for the Class of 2008. Contents include: Welcome Letter Introduction The NGFP Team Program Management Highlights Class of 2008 Incoming Fellows Orientation Travel Career Development Management of the Fellows Performance Highlights Closing Ceremony Encore Performance Where They Are Now Alumnus Career Highlights: Christine Buzzard Class of 2009 Applicant Database Upgradesmore » Fall Recruitment Activities Interviews Hiring and Clearances Introducing the Class of 2009 Class of 2010 Recruitment Strategy On the Horizon Appendix A: Class of 2009 Fellows« less

A Brief Historical Introduction to Solitons and the Inverse Scattering Transform--A Vision of Scott Russell

ERIC Educational Resources Information Center

Debnath, Lokenath

2007-01-01

This paper deals with a brief introduction to major remarkable discoveries of the "soliton" and the "inverse scattering transform" in the 1960s. The discovery of the soliton (or the solitary waves) began with the famous physical experiments of the Scottish Engineer and Naval Architect John Scott Russell in the Glasgow-Edinburgh…

Key Concepts for and Assessment of an Undergraduate Class that Engages Engineering Students in Climate Change Grand Challenge

NASA Astrophysics Data System (ADS)

Powers, S. E.; DeWaters, J.; Dhaniyala, S.

2015-12-01

Engineers must take a leading role in addressing the challenges of mitigating climate change and adapting to the inevitable changes that our world is facing. Yet climate change classes targeting engineering students are scarce. Technical education must focus on the problem formulation and solutions that consider multiple, complex interactions between engineered systems and the Earth's climate system and recognize that transformation raises societal challenges, including trade-offs among benefits, costs, and risks. Moreover, improving engineering students' climate science literacy will require strategies that also inspire students' motivation to work toward their solution. A climate science course for engineers has been taught 5 semesters as part of a NASA Innovations in Climate Education program grant (NNXlOAB57A). The basic premise of this project was that effective instruction must incorporate scientifically-based knowledge and observations and foster critical thinking, problem solving, and decision-making skills. Lecture, in-class cooperative and computer-based learning and a semester project provide the basis for engaging students in evaluating effective mitigation and adaptation solutions. Policy and social issues are integrated throughout many of the units. The objective of this presentation is to highlight the content and pedagogical approach used in this class that helped to contribute to significant gains in engineering students' climate literacy and critical thinking competencies. A total of 89 students fully participated in a pre/post climate literacy questionnaire. As a whole, students demonstrated significant gains in climate-related content knowledge (p<0.001), affect (p<0.001), and behavior (p=0.002). Mean post scores were above a 'passing' cutoff (70%) for all three subscales. Assessment of semester project reports with a critical thinking rubric showed that the students did an excellent job of formulating problem statements and solutions in a manner that incorporated a multidimensional systems perspective. These skills are sometimes foreign to technically focused, number crunching engineering students, but are critical for using their engineering skills and profession to address climate change mitigation and adaptation strategies.

Computer simulation of the heavy-duty turbo-compounded diesel cycle for studies of engine efficiency and performance

NASA Technical Reports Server (NTRS)

Assanis, D. N.; Ekchian, J. A.; Heywood, J. B.; Replogle, K. K.

1984-01-01

Reductions in heat loss at appropriate points in the diesel engine which result in substantially increased exhaust enthalpy were shown. The concepts for this increased enthalpy are the turbocharged, turbocompounded diesel engine cycle. A computer simulation of the heavy duty turbocharged turbo-compounded diesel engine system was undertaken. This allows the definition of the tradeoffs which are associated with the introduction of ceramic materials in various parts of the total engine system, and the study of system optimization. The basic assumptions and the mathematical relationships used in the simulation of the model engine are described.

Robust detection, isolation and accommodation for sensor failures

NASA Technical Reports Server (NTRS)

Emami-Naeini, A.; Akhter, M. M.; Rock, S. M.

1986-01-01

The objective is to extend the recent advances in robust control system design of multivariable systems to sensor failure detection, isolation, and accommodation (DIA), and estimator design. This effort provides analysis tools to quantify the trade-off between performance robustness and DIA sensitivity, which are to be used to achieve higher levels of performance robustness for given levels of DIA sensitivity. An innovations-based DIA scheme is used. Estimators, which depend upon a model of the process and process inputs and outputs, are used to generate these innovations. Thresholds used to determine failure detection are computed based on bounds on modeling errors, noise properties, and the class of failures. The applicability of the newly developed tools are demonstrated on a multivariable aircraft turbojet engine example. A new concept call the threshold selector was developed. It represents a significant and innovative tool for the analysis and synthesis of DiA algorithms. The estimators were made robust by introduction of an internal model and by frequency shaping. The internal mode provides asymptotically unbiased filter estimates.The incorporation of frequency shaping of the Linear Quadratic Gaussian cost functional modifies the estimator design to make it suitable for sensor failure DIA. The results are compared with previous studies which used thresholds that were selcted empirically. Comparison of these two techniques on a nonlinear dynamic engine simulation shows improved performance of the new method compared to previous techniques

Injectable nanoengineered stimuli-responsive hydrogels for on-demand and localized therapeutic delivery.

PubMed

Jalili, Nima A; Jaiswal, Manish K; Peak, Charles W; Cross, Lauren M; Gaharwar, Akhilesh K

2017-10-19

"Smart" hydrogels are an emerging class of biomaterials that respond to external stimuli and have been investigated for a range of biomedical applications, including therapeutic delivery and regenerative engineering. Stimuli-responsive nanogels constructed of thermoresponsive polymers such as poly(N-isopropylacrylamide-co-acrylamide) (poly(NIPAM-co-AM)) and magnetic nanoparticles (MNPs) have been developed as "smart carriers" for on-demand delivery of therapeutic biomolecules via magneto-thermal activation. However, due to their small size and systemic introduction, these poly(NIPAM-co-AM)/MNP nanogels result in limited control over long-term, localized therapeutic delivery. Here, we developed an injectable nanoengineered hydrogel loaded with poly(NIPAM-co-AM)/MNPs for localized, on-demand delivery of therapeutics (doxorubicin (DOX)). We have engineered shear-thinning and self-recoverable hydrogels by modulating the crosslinking density of a gelatin methacrylate (GelMA) network. Poly(NIPAM-co-AM)/MNP nanogels loaded with DOX were entrapped within a GelMA pre-polymer solution prior to crosslinking. The temperature and magnetic field dependent release of loaded DOX was observed from the nanoengineered hydrogels (GelMA/(poly(NIPAM-co-AM)/MNPs)). Finally, the in vitro efficacy of DOX released from injectable nanoengineered hydrogels was investigated using preosteoblast and osteosarcoma cells. Overall, these results demonstrated that the injectable nanoengineered hydrogels could be used for on-demand and localized therapeutic delivery for biomedical applications.

An Assessment of Different Educational Background of Students Performance in Engineering Mathematics and on the Class of Award Obtained at the Higher National Diploma (HND) Level at Cape Coast Polytechnic, Ghana

ERIC Educational Resources Information Center

Asirifi, Michael Kwabena; Mensah, Kweku Abeeku; Amoako, Joseph

2015-01-01

The purpose of this research article is to find out an assessment of different educational background of students performance in engineering mathematics and on the class of award obtained at the Higher National Diploma (HND) level at Cape Coast Polytechnic. A descriptive survey was conducted on students of the Electricals/Electronics Department…

Deep Web video

ScienceCinema

None Available

2018-02-06

To make the web work better for science, OSTI has developed state-of-the-art technologies and services including a deep web search capability. The deep web includes content in searchable databases available to web users but not accessible by popular search engines, such as Google. This video provides an introduction to the deep web search engine.