Advanced Gas Turbine (AGT) Technology Development Project

NASA Technical Reports Server (NTRS)

1987-01-01

This report is the eleventh in the series of Technical Summary reports for the Advanced Gas Turbine (AGT) Technology Development Project, authorized under NASA Contract DEN3-167, and sponsored by the Department of Energy (DOE). This report was prepared by Garrett Turbine Engine Company, A Division of the Garrett Corporation, and includes information provided by Ford Motor Company, the Standard Oil Company, and AiResearch Casting Company. This report covers plans and progress for the period July 1, 1985 through June 30, 1986. Technical progress during the reported period was highlighted by the 85-hour endurance run of an all-ceramic engine operating in the 2000 to 2250 F temperature regime. Component development continued in the areas of the combustion/fuel injection system, regenerator and seals system, and ceramic turbine rotor attachment design. Component rig testing saw further refinements. Ceramic materials showed continued improvements in required properties for gas turbine applications; however, continued development is needed before performance and reliability goals can be set.

The MetSkill Program — Rapidly Developing Effective Young Engineers in the Workplace

NASA Astrophysics Data System (ADS)

Drinkwater, Diana; Bianco, Nina

MetSkill is a professional development program for metallurgical engineers that integrates with normal duties in their first one or two years of service. Graduates work together on a structured technical project, facilitated by specialists and supported by formal learning, and ultimately reported to their technical managers. The program enables graduates to "fill the gaps" in their undergraduate education, which is increasingly pertinent as engineering degrees become more general. Participants report that they enjoy the focus on more challenging (rewarding) aspects of their jobs and feel more confident about problem solving. Sponsor companies add that the relationships developed with external technical specialists enhances opportunities for innovation and development. MetSkill was delivered to two major resource companies in Australia in 2012. This paper provides an outline of the program and the reasons for its success, and demonstrates how the learning model could be applied to groups of graduates in other engineering disciplines.

A case study of the knowledge transfer practices from the perspectives of highly experienced engineers in the aerospace industry

NASA Astrophysics Data System (ADS)

Martin, Deloris

Purpose. The purpose of this study was to describe the existing knowledge transfer practices in selected aerospace companies as perceived by highly experienced engineers retiring from the company. Specifically it was designed to investigate and describe (a) the processes and procedures used to transfer knowledge, (b) the systems that encourage knowledge transfer, (c) the impact of management actions on knowledge transfer, and (d) constraining factors that might impede knowledge transfer. Methodology. A descriptive case study was the methodology applied in this study. Qualitative data were gathered from highly experienced engineers from 3 large aerospace companies in Southern California. A semistructured interview was conducted face-to-face with each participant in a private or semiprivate, non-workplace setting to obtain each engineer's perspectives on his or her company's current knowledge transfer practices. Findings. The participants in this study preferred to transfer knowledge using face-to-face methods, one-on-one, through actual troubleshooting and problem-solving scenarios. Managers in these aerospace companies were observed as having knowledge transfer as a low priority; they tend not to promote knowledge transfer among their employees. While mentoring is the most common knowledge transfer system these companies offer, it is not the preferred method of knowledge transfer among the highly experienced engineers. Job security and schedule pressures are the top constraints that impede knowledge transfer between the highly experienced engineers and their coworkers. Conclusions. The study data support the conclusion that the highly experienced engineers in the study's aerospace companies would more likely transfer their knowledge to those remaining in the industry if the transfer could occur face-to-face with management support and acknowledgement of their expertise and if their job security is not threatened. The study also supports the conclusion that managers should be responsible for the leadership in developing a knowledge-sharing culture and rewarding those who do share. Recommendations. It is recommended that a quantitative study of highly experienced engineers in aerospace be conducted to determine the degree to which knowledge-sharing methods, processes, and procedures may be effective in capturing their knowledge. It is also recommended that a replication of this study be undertaken to include the perspectives of first-line managers on developing a knowledge-sharing culture for the aerospace industry.

Nalco Fuel Tech

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michalak, S.

1995-12-31

The Nalco Fuel Tech with its seat at Naperville (near Chicago), Illinois, is an engineering company working in the field of technology and equipment for environmental protection. A major portion of NALCO products constitute chemical materials and additives used in environmental protection technologies (waste-water treatment plants, water treatment, fuel modifiers, etc.). Basing in part on the experience, laboratories and RD potential of the mother company, the Nalco Fuel Tech Company developed and implemented in the power industry a series of technologies aimed at the reduction of environment-polluting products of fuel combustion. The engineering solution of Nalco Fuel Tech belong tomore » a new generation of environmental protection techniques developed in the USA. They consist in actions focused on the sources of pollutants, i.e., in upgrading the combustion chambers of power engineering plants, e.g., boilers or communal and/or industrial waste combustion units. The Nalco Fuel Tech development and research group cooperates with leading US investigation and research institutes.« less

Interactive training model of TRIZ for mechanical engineers in China

NASA Astrophysics Data System (ADS)

Tan, Runhua; Zhang, Huangao

2014-03-01

Innovation is a process of taking an original idea and converting it into a business value, in which the engineers face some inventive problems which can be solved hardly by experience. TRIZ, as a new theory for companies in China, provides both conceptual and procedural knowledge for finding and solving inventive problems. Because the government plays a leading role in the diffusion of TRIZ, too many companies from different industries are waiting to be trained, but the quantity of the trainers mastering TRIZ is incompatible with that requirement. In this context, to improve the training effect, an interactive training model of TRIZ for the mechanical engineers in China is developed and the implementation in the form of training classes is carried out. The training process is divided into 6 phases as follows: selecting engineers, training stage-1, finding problems, training stage-2, finding solutions and summing up. The government, TRIZ institutions and companies to join the programs interact during the process. The government initiates and monitors a project in form of a training class of TRIZ and selects companies to join the programs. Each selected companies choose a few engineers to join the class and supervises the training result. The TRIZ institutions design the training courses and carry out training curriculum. With the beginning of the class, an effective communication channel is established by means of interview, discussion face to face, E-mail, QQ and so on. After two years training practices, the results show that innovative abilities of the engineers to join and pass the final examinations increased distinctly, and most of companies joined the training class have taken congnizance of the power of TRIZ for product innovation. This research proposes an interactive training model of TRIZ for mechanical engineers in China to expedite the knowledge diffusion of TRIZ.

78 FR 72552 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-03

... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... General Electric Company model GEnx-2B67 and GEnx-2B67B turbofan engines. This AD was prompted by the... certain serial number General Electric Company (GE) model GEnx-2B67 and GEnx-2B67B turbofan engines. The...

KSC-2013-3688

NASA Image and Video Library

2013-09-12

HOUSTON – Engineers and managers work inside a simulator of The Boeing Company's CST-100 spacecraft during evaluations of potential designs and software functions in a room at the company's Houston location. The CST-100 is under development in partnership between the company and NASA's Commercial Crew Program, or CCP. The spacecraft is designed to fly to low-Earth orbit and potentially dock with the International Space Station. Photo credit: The Boeing Company

IPAD project overview

NASA Technical Reports Server (NTRS)

Fulton, R. E.

1980-01-01

To respond to national needs for improved productivity in engineering design and manufacturing, a NASA supported joint industry/government project is underway denoted Integrated Programs for Aerospace-Vehicle Design (IPAD). The objective is to improve engineering productivity through better use of computer technology. It focuses on development of technology and associated software for integrated company-wide management of engineering information. The project has been underway since 1976 under the guidance of an Industry Technical Advisory Board (ITAB) composed of representatives of major engineering and computer companies and in close collaboration with the Air Force Integrated Computer-Aided Manufacturing (ICAM) program. Results to date on the IPAD project include an in-depth documentation of a representative design process for a large engineering project, the definition and design of computer-aided design software needed to support that process, and the release of prototype software to integrate selected design functions. Ongoing work concentrates on development of prototype software to manage engineering information, and initial software is nearing release.

Acoustics and Thrust of Separate Flow Exhaust Nozzles With Mixing Devices Investigated for High Bypass Ratio Engines

NASA Technical Reports Server (NTRS)

Saiyed, Naseem H.

2000-01-01

Typical installed separate-flow exhaust nozzle system. The jet noise from modern turbofan engines is a major contributor to the overall noise from commercial aircraft. Many of these engines use separate nozzles for exhausting core and fan streams. As a part of NASA s Advanced Subsonic Technology (AST) program, the NASA Glenn Research Center at Lewis Field led an experimental investigation using model-scale nozzles in Glenn s Aero-Acoustic Propulsion Laboratory. The goal of the investigation was to develop technology for reducing the jet noise by 3 EPNdB. Teams of engineers from Glenn, the NASA Langley Research Center, Pratt & Whitney, United Technologies Research Corporation, the Boeing Company, GE Aircraft Engines, Allison Engine Company, and Aero Systems Engineering contributed to the planning and implementation of the test.

E-Standards For Mass Properties Engineering

NASA Technical Reports Server (NTRS)

Cerro, Jeffrey A.

2008-01-01

A proposal is put forth to promote the concept of a Society of Allied Weight Engineers developed voluntary consensus standard for mass properties engineering. This standard would be an e-standard, and would encompass data, data manipulation, and reporting functionality. The standard would be implemented via an open-source SAWE distribution site with full SAWE member body access. Engineering societies and global standards initiatives are progressing toward modern engineering standards, which become functioning deliverable data sets. These data sets, if properly standardized, will integrate easily between supplier and customer enabling technically precise mass properties data exchange. The concepts of object-oriented programming support all of these requirements, and the use of a JavaTx based open-source development initiative is proposed. Results are reported for activity sponsored by the NASA Langley Research Center Innovation Institute to scope out requirements for developing a mass properties engineering e-standard. An initial software distribution is proposed. Upon completion, an open-source application programming interface will be available to SAWE members for the development of more specific programming requirements that are tailored to company and project requirements. A fully functioning application programming interface will permit code extension via company proprietary techniques, as well as through continued open-source initiatives.

National meeting to review IPAD status and goals. [Integrated Programs for Aerospace-vehicle Design

NASA Technical Reports Server (NTRS)

Fulton, R. E.

1980-01-01

A joint NASA/industry project called Integrated Programs for Aerospace-vehicle Design (IPAD) is described, which has the goal of raising aerospace-industry productivity through the application of computers to integrate company-wide management of engineering data. Basically a general-purpose interactive computing system developed to support engineering design processes, the IPAD design is composed of three major software components: the executive, data management, and geometry and graphics software. Results of IPAD activities include a comprehensive description of a future representative aerospace vehicle design process and its interface to manufacturing, and requirements and preliminary design of a future IPAD software system to integrate engineering activities of an aerospace company having several products under simultaneous development.

New Skills for Out-of-Work Engineers

ERIC Educational Resources Information Center

Environmental Science and Technology, 1972

1972-01-01

Discusses an innovative educational program conducted by a large aerospace company to retrain unemployed aerospace engineers in water pollution control, thus providing them with useful and satisfying employment. Program development, implementation and success are reviewed. (BL)

The growth of tissue engineering.

PubMed

Lysaght, M J; Reyes, J

2001-10-01

This report draws upon data from a variety of sources to estimate the size, scope, and growth rate of the contemporary tissue engineering enterprise. At the beginning of 2001, tissue engineering research and development was being pursued by 3,300 scientists and support staff in more than 70 startup companies or business units with a combined annual expenditure of over $600 million. Spending by tissue engineering firms has been growing at a compound annual rate of 16%, and the aggregate investment since 1990 now exceeds $3.5 billion. At the beginning of 2001, the net capital value of the 16 publicly traded tissue engineering startups had reached $2.6 billion. Firms focusing on structural applications (skin, cartilage, bone, cardiac prosthesis, and the like) comprise the fastest growing segment. In contrast, efforts in biohybrid organs and other metabolic applications have contracted over the past few years. The number of companies involved in stem cells and regenerative medicine is rapidly increasing, and this area represents the most likely nidus of future growth for tissue engineering. A notable recent trend has been the emergence of a strong commercial activity in tissue engineering outside the United States, with at least 16 European or Australian companies (22% of total) now active.

76 FR 22917 - National Register of Historic Places; Notification of Pending Nominations and Related Actions

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-25

... Program. DISTRICT OF COLUMBIA District of Columbia Engine Company 16--Truck Company 3, (Firehouses in Washington DC MPS) 1018 13th St., NW., Washington, 11000281 Engine Company 22, (Firehouses in Washington DC MPS) 5760 Georgia Ave., NW., Washington, 11000282 Engine Company 26, (Firehouses in Washington DC MPS...

76 FR 64844 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-19

... Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed... General Electric Company (GE) CF6-45 and CF6-50 series turbofan engines with certain low-pressure turbine... series turbofan engines with certain LPT rotor stage 3 disks installed. That AD requires initial and...

Creating Future Scientists and Engineers. 2013 Keynote Speech

ERIC Educational Resources Information Center

Hicks, Stephen

2013-01-01

This article presents a summary of the keynote speech presented at the ITEEA Conference in Columbus, OH, March 4, 2013, by Steven Hicks. Hicks is former Director, Research & Development, Flavor & Fragrance Development Global Capability, for the Procter & Gamble Company. Educated as a chemical engineer, his outside interests include…

Advanced Gas Turbine (AGT) Technology Development Project annual report

NASA Technical Reports Server (NTRS)

1986-01-01

This report is the tenth in a series of Technical Summary reports for the Advanced Gas Turbine (AGT) Technology Development Project, authorized under NASA Contract DEN3-167, and sponsored by the Department of Energy (DOE). This report was prepared by Garrett Turbine Engine Company, A Division of the Garrett Corporation, and includes information provided by Ford Motor Company, the Carborundum Company, and AiResearch Casting Company. The Project is administered by Mr. Thomas N. Strom, Project Manager, NASA-Lewis Research Center, Cleveland, Ohio. This report covers plans and progress for the period July 1, 1984 through June 30, 1985.

78 FR 44899 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-25

... Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed... Electric Company (GE) GE90-110B1 and -115B turbofan engines. This proposed AD was prompted by multiple...) 2165M22P01, installed on GE90-110B1 and -115B turbofan engines. One of the leaks led to an under cowl engine...

KSC-2013-3687

NASA Image and Video Library

2013-09-12

HOUSTON – Engineers and managers work inside a simulator of The Boeing Company's CST-100 spacecraft during evaluations of potential designs and software functions in a room at the company's Houston location. The CST-100 is under development in partnership between the company and NASA's Commercial Crew Program, or CCP. The spacecraft is designed to fly to low-Earth orbit and potentially dock with the International Space Station, which is seen on the screen in front of the simulator. Photo credit: The Boeing Company

78 FR 76045 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-16

... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... (AD) for General Electric Company (GE) GE90-110B1 and GE90-115B turbofan engines with certain high... turbofan engines with high pressure compressor (HPC) rotor stage 2-5 spools, part numbers (P/Ns) 351-103...

78 FR 50320 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-19

... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... Electric Company (GE) model GEnx-2B67B turbofan engines with booster anti-ice (BAI) air duct, part number...-2B67 turbofan engine be removed from the Applicability section of this AD. The commenters noted that...

78 FR 72567 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-03

... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... General Electric Company (GE) GE90-110B1 and -115B turbofan engines. This AD was prompted by multiple... turbofan engines with variable bypass valve (VBV) actuator fuel supply tube, part number (P/N) 2165M22P01...

77 FR 3088 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-23

... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... Electric Company (GE) CF34-10E series turbofan engines. This AD was prompted by a report of heavy wear... turbofan engines installed on airplanes of U.S. registry. We also estimate that it will take about 8 work...

168. ARAIV Index of drawings prepared by Norman Engineering Company ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

168. ARA-IV Index of drawings prepared by Norman Engineering Company in preparation for construction of ARA-IV. Norman Engineering Company 961-area/ML-1index. Date: March 1961. Ineel index code no. 066-9999-90-613-102731. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

Near East/South Asia Report

DTIC Science & Technology

1985-04-05

the air defense system Amon, a system which the. Contraves company developed by means of the Skyguard system on the basia of specifications engineers...of the Contraves Company and the Arab Industrialization Authority exhibits, displayed a group of armored vehicles, military transport vehicles...the most up-to-date kind, constituting a fair in itself. Take the Contraves Company, for example, which exhibited the latest aerial defense material

Event-driven management algorithm of an Engineering documents circulation system

NASA Astrophysics Data System (ADS)

Kuzenkov, V.; Zebzeev, A.; Gromakov, E.

2015-04-01

Development methodology of an engineering documents circulation system in the design company is reviewed. Discrete event-driven automatic models using description algorithms of project management is offered. Petri net use for dynamic design of projects is offered.

78 FR 56594 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-13

... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... General Electric Company (GE) GE90-76B, -85B, -90B, -94B, -110B1, and - 115B turbofan engines. This AD was...) Applicability This AD applies to General Electric Company (GE): (1) GE90-76B, -85B, -90B, and -94B turbofan...

77 FR 74125 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-13

... Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed... Company (GE) CF34-8C and CF34-8E turbofan engines with certain part numbers (P/N) of operability bleed... received reports of three failure events of OBV ring lock fuel fittings on GE CF34-8C turbofan engines. Two...

78 FR 38195 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-26

... Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT... all General Electric Company (GE) GE90-110B1 and GE90-115B turbofan engines. This emergency AD was.... owners and operators of these GE90-110B1 and GE90-115B turbofan engines. This action was prompted by...

78 FR 19628 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-02

... Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed... Electric Company (GE) GE90-76B, -85B, -90B, -94B, - 110B1, and -115B turbofan engines. This proposed AD was... of stage 1 HPT stator shroud distress resulting in engine removals on airplanes with GE90 turbofan...

78 FR 19983 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-03

... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... Electric Company (GE) CF34-8C and CF34-8E turbofan engines with certain part numbers (P/N) of operability...-8E6, and CF34-8E6A1 turbofan engines, with an operability bleed valve (OBV) part number (P/N...

Engine Lubricant

NASA Technical Reports Server (NTRS)

1993-01-01

PS 212, a plasma-sprayed coating developed by NASA, is used to coat valves in a new rotorcam engine. The coating eliminates the need for a liquid lubricant in the rotorcam, which has no crankshaft, flywheel, distributor or water pump. Developed by Murray United Development Corporation, it is a rotary engine only 10 inches long with four cylinders radiating outward from a central axle. Company officials say the engine will be lighter, more compact and cheaper to manufacture than current engines and will feature cleaner exhaust emissions. A licensing arrangement with a manufacturer is under negotiation. Primary applications are for automobiles, but the engine may also be used in light aircraft.

Auto Emission Testing

NASA Technical Reports Server (NTRS)

1979-01-01

The photos show automobile engines being tested for nitrous oxide emissions, as required by the Environmental Protection Agency (EPA), at the Research and Engineering Division of Ford Motor Company, Dearborn. Michigan. NASA technical information helped the company develop a means of calculating emissions test results. Nitrous oxide emission readings vary with relative humidity in the test facility. EPA uses a standard humidity measurement, but the agency allows manufacturers to test under different humidity conditions, then apply a correction factor to adjust the results to the EPA standard. NASA's Dryden Flight Research Center developed analytic equations which provide a simple, computer-programmable method of correcting for humidity variations. A Ford engineer read a NASA Tech Brief describing the Dryden development and requested more detailed information in the form of a technical support package, which NASA routinely supplies to industry on request. Ford's Emissions Test Laboratory now uses the Dryden equations for humidity-adjusted emissions data reported to EPA.

Importance And Role Of Competence In Professional Career Of Product Develop Engineers

NASA Astrophysics Data System (ADS)

Miltenović, Aleksandar; Banić, Milan; Miltenović, Vojislav

2015-07-01

Product development is a creative task where is systematically created a new product, which makes possible to firms to offer attractive, innovative and market oriented products. In conditions of fierce competition and saturated markets, companies that do not innovate are stagnating and disappear from the market. Innovation is therefore every intervention which can reduce production costs, enables optimum utilization of available human, energy and material resources, improve product quality, improve the placement, which leads to an increase in competitiveness. A prerequisite for fulfillment of the above-mentioned tasks is that the companies have engineers with the appropriate competencies, which are able to, through creativity, innovation and fascinating technique of creating new or improving existing products and lunch it on the market. The paper discusses the role and importance of the competences that are necessary for a successful professional career of product development engineers.

Computer Programming Languages and Expertise Needed by Practicing Engineers.

ERIC Educational Resources Information Center

Doelling, Irvin

1980-01-01

Discussed is the present engineering computer environment of a large aerospace company recognized as a leader in the application and development of computer-aided design and computer-aided manufacturing techniques. A review is given of the exposure spectrum of engineers to the world of computing, the computer languages used, and the career impacts…

Design, Test, Redesign: Simulation in Technology, Engineering, and Design Education Classrooms

ERIC Educational Resources Information Center

Swinson, Ronnie; Clark, Aaron C.; Ernst, Jeremy V.; Sutton, Kevin

2016-01-01

Today's engineers, designers, and technologists are often thrust into the role of problem solver, from the initial design phase of a product or process all the way to final development. Many engineers in manufacturing environments are tasked with solving problems and continuously improving processes to enhance company profitability, efficiency,…

High Bypass Turbofan Component Development. Phase II. Detailed Design.

DTIC Science & Technology

1979-08-01

Selecting Blade Thickness for Bird Strike 46 27. Method for Selecting Blade Airfoil Attachment 49 AIRCRAF ENGINE GROUP IV GENERAL ELECTRIC COMPANY...reserves, the replacement aircraft must have a fuel efficient engine as the propulsion system, i. e., * modern turbofan engine . Technology in the large... turbofan engines has been well demonstrated, but little has been done in the size applicable to a twin- engine primary trainer aircraft . Today, there is

Design of the subject of quality engineering and security of the product of the degree in engineering in industrial design and development of product based in the methodology of the case

NASA Astrophysics Data System (ADS)

González, M. R.; Lambán, M. P.

2012-04-01

This paper presents the result of designing the subject Quality Engineering and Security of the Product, belonging to the Degree of Engineering in Industrial Design and Product Development, on the basis of the case methodology. Practical sessions of this subject are organized using the whole documents of the Quality System Management of the virtual company BeaLuc S.A.

NASA Lewis Helps Company With New Single-Engine Business Turbojet

NASA Technical Reports Server (NTRS)

1998-01-01

Century Aerospace Corporation, a small company in Albuquerque, New Mexico, is developing a six-seat aircraft powered by a single turbofan engine for general aviation. The company had completed a preliminary design of the jet but needed analyses and testing to proceed with detailed design and subsequent fabrication of a prototype aircraft. NASA Lewis Research Center used computational fluid dynamics (CFD) analyses to ferret out areas of excessive curvature in the inlet where separation might occur. A preliminary look at the results indicated very good inlet performance; and additional calculations, performed with vortex generators installed in the inlet, led to even better results. When it was initially determined that the airflow distortion pattern at the compressor face fell outside of the limits set by the engine manufacturer, the Lewis team studied possible solutions, selected the best, and provided recommendations. CFD results for the inlet system were so good that wind tunnel tests were unnecessary.

28. MESTA STEAM ENGINE, INSTALLED BY THE CORRIGAN, McKINNEY COMPANY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

28. MESTA STEAM ENGINE, INSTALLED BY THE CORRIGAN, McKINNEY COMPANY IN 1916, STILL DRIVES THE 44-INCH REVERSING BLOOMING MILL. THE TWIN TANDAM, COMPOUND CONDENSING, REVERSING STEAM ENGINE HAS A RATED CAPACITY OF 35,000 H.P. IT WAS BUILT BY THE MESTA MACHINE COMPANY OF PITTSBURGH. - Corrigan, McKinney Steel Company, 3100 East Forty-fifth Street, Cleveland, Cuyahoga County, OH

The Zoom Lens: A Case Study in Geometrical Optics.

ERIC Educational Resources Information Center

Cheville, Alan; Scepanovic, Misa

2002-01-01

Introduces a case study on a motion picture company considering the purchase of a newly developed zoom lens in which students act as the engineers designing the zoom lens based on the criteria of company's specifications. Focuses on geometrical optics. Includes teaching notes and classroom management strategies. (YDS)

78 FR 24671 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-26

... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... certain General Electric Company (GE) CF6-80C2 series turbofan engines. That AD currently requires.../B1F/B2F/B4F/B6F/B7F/D1F turbofan engines with any of the following installed: (1) Fuel tube, part...

78 FR 47534 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-06

... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... directive (AD) 2013-14-51 for General Electric Company (GE) GE90-110B1 and GE90-115B turbofan engines with... all known U.S. owners and operators of GE90-110B1 and GE90-115B turbofan engines. AD 2013-14-51...

Spherical Joint Piston and Connecting Rod Developed

NASA Technical Reports Server (NTRS)

1996-01-01

Under an interagency agreement with the Department of Energy, the NASA Lewis Research Center manages a Heavy-Duty Diesel Engine Technology (HDET) research program. The overall program objectives are to reduce fuel consumption through increased engine efficiency, reduce engine exhaust emissions, and provide options for the use of alternative fuels. The program is administered with a balance of research contracts, university research grants, and focused in-house research. The Cummins Engine Company participates in the HDET program under a cost-sharing research contract. Cummins is researching and developing in-cylinder component technologies for heavy-duty diesel engines. An objective of the Cummins research is to develop technologies for a low-emissions, 55-percent thermal efficiency (LE-55) engine. The best current-production engines in this class achieve about 46-percent thermal efficiency. Federal emissions regulations are driving this technology. Regulations for heavy duty diesel engines were tightened in 1994, more demanding emissions regulations are scheduled for 1998, and another step is planned for 2002. The LE-55 engine emissions goal is set at half of the 1998 regulation level and is consistent with plans for 2002 emissions regulations. LE-55 engine design requirements to meet the efficiency target dictate a need to operate at higher peak cylinder pressures. A key technology being developed and evaluated under the Cummins Engine Company LE-55 engine concept is the spherical joint piston and connecting rod. Unlike conventional piston and connecting rod arrangements which are joined by a pin forming a hinged joint, the spherical joint piston and connecting rod use a ball-and-socket joint. The ball-and-socket arrangement enables the piston to have an axisymmetric design allowing rotation within the cylinder. The potential benefits of piston symmetry and rotation are reduced scuffing, improved piston ring sealing, improved lubrication, mechanical and thermal load symmetry, reduced bearing stresses, reduced running clearances, and reduced oil consumption. The spherical joint piston is a monolithic, squeeze-cast, fiber-reinforced aluminum piston. The connecting rod has a ball end that seats on a spherical saddle within the piston and is retained by a pair of aluminum bronze holder rings. The holder rings are secured by a threaded ring that mates with the piston. As part of the ongoing research and development activity, the Cummins Engine Company successfully completed a 100-hr test of the spherical joint piston and connecting rod at LE- 55 peak steady-state engine conditions. In addition, a 100-hr transient cycle test that varied engine conditions between LE-55 no-load and LE-55 full-load was successfully completed.

Alternative-fueled truck demonstration natural gas program: Caterpillar G3406LE development and demonstration

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

In 1990, the California Energy Commission, the South Coast Air Quality Management District, and the Southern California Gas Company joined together to sponsor the development and demonstration of compressed natural gas engines for Class 8 heavy-duty line-haul trucking applications. This program became part of an overall Alternative-Fueled Truck Demonstration Program, with the goal of advancing the technological development of alternative-fueled engines. The demonstration showed natural gas to be a technically viable fuel for Class 8 truck engines.

Breadboard Facility

NASA Technical Reports Server (NTRS)

1977-01-01

In the sixties, Chrysler was NASA's prime contractor for the Saturn I and IB test launch vehicles. The company installed and operated at Huntsville what was known as the Saturn I/IB Development Breadboard Facility. "Breadboard," means an array of electrical and electronic equipment for performing a variety of development and test functions. This work gave Chrysler a broad capability in computerized testing to assure quality control in development of solid-state electronic systems. Today that division is manufacturing many products not destined for NASA, most of them being associated with the company's automotive line. A major project is production and quality-control testing of the "lean-burn" engine, one that has a built-in Computer to control emission timing, and allow the engine to run on a leaner mixture of fuel and air. Other environment-related products include vehicle emission analyzers. The newest of the line is an accurate, portable solid state instrument for testing auto exhaust gases. The exhaust analyzers, now being produced for company dealers and for service

Innovative Ways of Teaching Polymerization Reaction Engineering: Exchanging Information between the University and Industry.

ERIC Educational Resources Information Center

Soares, Joao B. P.; Penlidis, Alexander; Hamielec, Archie E.

1998-01-01

Describes how interaction with several polymer manufacturing companies through industrial short courses and research projects has led to the development of dynamic and up-to-date undergraduate and graduate curriculums in polymer science and engineering technology. (DDR)

The organism is the product.

PubMed

Kelly, Jason

2012-01-20

A new industry model is emerging where microbes are first developed by specialist organism engineering firms and then deployed by customers in specific application areas. It is now realistic for companies without prior fermentation experience to purchase and deploy an engineered organism to expand their business.

78 FR 21578 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-11

... Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed... Company (GE) model GEnx-2B67 and GEnx-2B67B turbofan engines with booster anti-ice (BAI) air duct, part... GE model GEnx-2B67 and GEnx- 2B67B turbofan engines with BAI air duct, P/N 2469M32G01, and support...

Return of the propeller

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1987-05-01

Resurrecting the propeller-driven airplane could help save fuel if there is another oil crisis like in the 1970s. This article discusses the new propeller engine, propfans, which are being developed for commercial airplanes. It discusses the three types of propfan engines and the advantages and disadvantages of each. It also tells about the propfan airplanes several companies are developing.

The Supervisor in the Project-Organized Group Work Should Participate in Developing the Students' Project Competencies

ERIC Educational Resources Information Center

Hansen, Soren

2004-01-01

Most work done by engineers today is organized in projects and very often as teamwork. When educating towards employability, it is therefore important that the students develop competencies in areas such as project management, collaboration and teamwork. In companies using human resource management, we find similar expectations to the engineers'…

Research on Building Education & Workforce Capacity in Systems Engineering

DTIC Science & Technology

2012-09-30

Science Coast Guard Academy Chris Lund, Research Engineer USCG R&D center Civil Engineering Coast Guard Academy Scot T. Tripp, Program Manager USCG...74 researchers Coast Guard Academy Scot T. Tripp, Program Manager Internal institutional USCG R&D center... Woods Industry Lockheed Martin Aeronautics Company Defense contracted system development and analysis Stevens Tom Newby Industry Buro

Configuration Management File Manager Developed for Numerical Propulsion System Simulation

NASA Technical Reports Server (NTRS)

Follen, Gregory J.

1997-01-01

One of the objectives of the High Performance Computing and Communication Project's (HPCCP) Numerical Propulsion System Simulation (NPSS) is to provide a common and consistent way to manage applications, data, and engine simulations. The NPSS Configuration Management (CM) File Manager integrated with the Common Desktop Environment (CDE) window management system provides a common look and feel for the configuration management of data, applications, and engine simulations for U.S. engine companies. In addition, CM File Manager provides tools to manage a simulation. Features include managing input files, output files, textual notes, and any other material normally associated with simulation. The CM File Manager includes a generic configuration management Application Program Interface (API) that can be adapted for the configuration management repositories of any U.S. engine company.

Hurdles in tissue engineering/regenerative medicine product commercialization: a survey of North American academia and industry.

PubMed

Johnson, Peter C; Bertram, Timothy A; Tawil, Bill; Hellman, Kiki B

2011-01-01

The Tissue Engineering and Regenerative Medicine International Society-North America (TERMIS-NA) Industry Committee was formed in February 2009 to address the common roadblocks (i.e., hurdles) in the commercialization of tissue engineering/regenerative medicine products for its members. A semiquantitative online opinion survey instrument that delineated potentially sensitive hurdles to commercialization in each of the TERMIS constituency groups that generally participate in the stream of technology commercialization (academia, startup companies, development-stage companies, and established companies) was developed. The survey was opened to each of the 863 members of TERMIS-NA for a period of 5 weeks from October to November 2009. By its conclusion, 215 members (25%) had responded. Their proportionate numbers were closely representative of TERMIS-NA constituencies. The resulting data delineate what each group considers to be its most difficult and also its easiest hurdles in taking a technology to full product development. In addition, each group ranked its perception of the difficult and easy hurdles for all other groups, enabling an assessment of the degree of understanding between groups. The data depict not only critical hurdles in the path to commercialization at each stage in product development but also a variable understanding of perceptions of hurdles between groups. This assessment has provided the Industry Committee with activity foci needed to assist individual groups in the technology-commercialization stream. Moreover, the analysis suggests that enhanced communication between groups engaged in commercialization will be critical to the successful development of products in the tissue engineering/regenerative medicine sector.

Empirical research in service engineering based on AHP and fuzzy methods

NASA Astrophysics Data System (ADS)

Zhang, Yanrui; Cao, Wenfu; Zhang, Lina

2015-12-01

Recent years, management consulting industry has been rapidly developing worldwide. Taking a big management consulting company as research object, this paper established an index system of service quality of consulting, based on customer satisfaction survey, evaluated service quality of the consulting company by AHP and fuzzy comprehensive evaluation methods.

Proposed Missions and Organization of the U.S. Army Research, Development and Engineering Command

DTIC Science & Technology

2005-01-01

successfully employed in many industries and by many companies, including Pittsburgh Steel, IBM, Unilever , and Ford. Each of these organizations fine- tuned...employed by many companies, such as Pittsburgh Steel, IBM, Unilever , and Ford, which have fine-tuned the matrix to suit their particular goals and

Proposal for Supply Chain Concentration in the Traditional MBA Program

ERIC Educational Resources Information Center

Ramaswamy, K. V.

2012-01-01

The purpose of this proposal is to develop and implement a concentration in Supply Chain Management in the existing traditional MBA program effective fall 2012. Houston is the hub for many multinational oil and energy companies, large healthcare systems, wholesale/retail businesses, engineering and construction companies, and is a major city along…

77 FR 48110 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-13

... Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed... certain General Electric Company (GE) CF6-80C2 series turbofan engines. The existing AD requires... 2000-04-14, Amendment 39-11597 (65 FR 10698, February 29, 2000), for all GE CF6-80C2 series turbofan...

77 FR 76977 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-31

... Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Supplemental notice... proposed airworthiness directive (AD) for certain General Electric Company (GE) CF6-80C2 series turbofan... part 39 to include an AD that would apply to certain GE CF6-80C2 series turbofan engines. That NPRM...

STATION BUILDING. United Engineering Company Ltd., Alameda Shipyard, Ship Repair ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

STATION BUILDING. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities. Plan, elevations, sections, details. Austin Willmott Earl, Consulting Engineer, 233 Sansome Street, San Francisco, California. Drawing no. 504. Various scales. January 20, 1945, no revisions. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76, amendments 4 & 5. blueprint - United Engineering Company Shipyard, Electrical Services & Switching Station, 2900 Main Street, Alameda, Alameda County, CA

Ultra-Efficient Engine Technology (UEET) Program

NASA Technical Reports Server (NTRS)

Manthey, Lori A.

2001-01-01

The Ultra-Efficient Engine Technology (UEET) Program includes seven key projects that work with industry to develop and hand off revolutionary propulsion technologies that will enable future-generation vehicles over a wide range of flight speeds. A new program office, the Ultra-Efficient Engine Technology (UEET) Program Office, was formed at the NASA Glenn Research Center to manage an important National propulsion program for NASA. The Glenn-managed UEET Program, which began on October 1, 1999, includes participation from three other NASA centers (Ames, Goddard, and Langley), as well as five engine companies (GE Aircraft Engines, Pratt & Whitney, Honeywell, Allison/Rolls Royce, and Williams International) and two airplane manufacturers (the Boeing Company and Lockheed Martin Corporation). This 6-year, nearly $300 million program will address local air-quality concerns by developing technologies to significantly reduce nitrogen oxide (NOx) emissions. In addition, it will provide critical propulsion technologies to dramatically increase performance as measured in fuel burn reduction that will enable reductions of carbon dioxide (CO2) emissions. This is necessary to address the potential climate impact of long-term aviation growth.

26 CFR 1.482-9 - Methods to determine taxable income in connection with a controlled services transaction.

Code of Federal Regulations, 2010 CFR

2010-04-01

... or other similar arrangement. (vi) Research, development, or experimentation. (vii) Engineering or... property development activities. All of Company P's research and development (R&D) activity is devoted to...

From the Gleam in the Eye of an Engineer to a Dream Classroom: How Assistive Technology Products Move from Research and Development into the Hands of Children

ERIC Educational Resources Information Center

de St. Aubin, Shawn-Laree

2010-01-01

This article explains how Asssistive Technology products move from research and development into the hands of children. The assistive technology (AT) industry is maturing, with many exciting new technologies under development in university settings, by individual inventors and engineers, and by leading AT and information technology (IT) companies.…

7 CFR 1767.10 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... research institute, industry association, foundation, university, engineering company or similar contractor) in pursuing research, development, and demonstration activities including experiment, design... the removal of the property retired. Research, Development, and Demonstration (RD&D) includes all...

7 CFR 1767.10 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... research institute, industry association, foundation, university, engineering company or similar contractor) in pursuing research, development, and demonstration activities including experiment, design... the removal of the property retired. Research, Development, and Demonstration (RD&D) includes all...

7 CFR 1767.10 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... research institute, industry association, foundation, university, engineering company or similar contractor) in pursuing research, development, and demonstration activities including experiment, design... the removal of the property retired. Research, Development, and Demonstration (RD&D) includes all...

7 CFR 1767.10 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... research institute, industry association, foundation, university, engineering company or similar contractor) in pursuing research, development, and demonstration activities including experiment, design... the removal of the property retired. Research, Development, and Demonstration (RD&D) includes all...

7 CFR 1767.10 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... research institute, industry association, foundation, university, engineering company or similar contractor) in pursuing research, development, and demonstration activities including experiment, design... the removal of the property retired. Research, Development, and Demonstration (RD&D) includes all...

76 FR 68634 - Airworthiness Directives; General Electric Company (GE) CF6 Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-07

... Airworthiness Directives; General Electric Company (GE) CF6 Turbofan Engines AGENCY: Federal Aviation... ``(c) This AD applies to * * * and CF6-80A3 turbofan engines with left-hand links * * *.'' to ``(c) This AD applies to * * * and CF6-80A3 turbofan engines, including engines marked on the engine data...

76 FR 64291 - Airworthiness Directives; General Electric Company (GE) Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-18

... Company (GE) Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of... turbofan engines, including engines marked on the engine data plate as CF6-80C2B7F1. This proposed AD was... on engines in service. This proposed AD would require a one- time inspection of the No. 3 bearing...

76 FR 6759 - Monsanto Company and KWS SAAT AG; Decision With Respect to the Petition for Partial Deregulation...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-08

... Genetically Engineered Roundup Ready Sugar Beets AGENCY: Animal and Plant Health Inspection Service, USDA... Ready[supreg] sugar beets developed by the Monsanto Company (Monsanto) and KWS SAAT AG (KWS), designated.... APHIS will grant a partial deregulation for event H7-1 sugar beet root crop production activities when...

23. BUILDING NO. 22L, SHEET NO. 3. United Engineering Company ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

23. BUILDING NO. 22L, SHEET NO. 3. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities. Plans, section, & detail. Alben Froberg, Architect, 3454 Harlan Street, Oakland, California. Sheet no. 3. Plan no. 10,525. Various scales. March 1, 1943, last revised 3/15/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Engineering Building, 2900 Main Street, Alameda, Alameda County, CA

22. BUILDING NO. 22L, SHEET NO. 2. United Engineering Company ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. BUILDING NO. 22L, SHEET NO. 2. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities. Plans, section, & detail. Alben Froberg, Architect, 3454 Harlan Street, Oakland, California. Sheet no. 2. Plan no. 10,525. Various scales. March 1, 1942, last revised 3/15/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Engineering Building, 2900 Main Street, Alameda, Alameda County, CA

A Vision of the Chemical Engineering Curriculum of the Future

ERIC Educational Resources Information Center

Armstrong, Robert C.

2006-01-01

A dramatic shift in chemical engineering undergraduate education is envisioned, based on discipline-wide workshop discussions that have taken place over the last two years. Faculty from more than 53 universities and industry representatives from 19 companies participated. Through this process broad consensus has been developed regarding basic…

Development of Emissions Measurement Techniques for Afterburning Turbine Engines. Supplement 2. Afterburner Plume Computer Program User’s Manual.

DTIC Science & Technology

1975-10-01

AO-AUHb b27 UNCLASSIFIED GENERAL ELECTRIC CO CINCINNATI OHIO AIRCRAFT ENGINE GROUP F/G 2l/5 DEVELOPMENT OF EMISSIONS MEASUREMENT TECHNIQUES FOR...Colley D.R. Ferguson M.A. Smith GENERAL ELECTRIC COMPANY Aircraft Engine Group Cincinnati, Ohio 45215 October 1975 Technical Report AFAPL-TR-7 5-52...Service (NTIS). At NTIS, it will be avail’ able to the general public, including foreign nations. This technical report has been reviewed and is

Use of learning miniprojects in a chemistry laboratory for engineering

NASA Astrophysics Data System (ADS)

Cancela, Angeles; Maceiras, Rocio; Sánchez, Angel; Izquierdo, Milagros; Urréjola, Santiago

2016-01-01

The aim of this paper is to describe the design of chemical engineering laboratory sessions in order to focus them on the learning company approach. This is an activity carried out in the classroom similar to the activities that exist in real companies. This could lead classroom practice to a more cooperative learning and a different style of experimentation. The stated goal is to make a design that seeks to motivate students in a cooperative manner to perform their experiments self-directed and self-organised. The teaching organisation and development of participatory action research are described.

18 CFR 367.1 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... retired. (40) Research, development, and demonstration (RD&D) means expenditures incurred by a service... organization (such as research institute, industry association, foundation, university, engineering company or similar contractor) in pursuing research, development, and demonstration activities including experiment...

18 CFR 367.1 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... retired. (40) Research, development, and demonstration (RD&D) means expenditures incurred by a service... organization (such as research institute, industry association, foundation, university, engineering company or similar contractor) in pursuing research, development, and demonstration activities including experiment...

18 CFR 367.1 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... retired. (40) Research, development, and demonstration (RD&D) means expenditures incurred by a service... organization (such as research institute, industry association, foundation, university, engineering company or similar contractor) in pursuing research, development, and demonstration activities including experiment...

18 CFR 367.1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... retired. (40) Research, development, and demonstration (RD&D) means expenditures incurred by a service... organization (such as research institute, industry association, foundation, university, engineering company or similar contractor) in pursuing research, development, and demonstration activities including experiment...

18 CFR 367.1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... retired. (40) Research, development, and demonstration (RD&D) means expenditures incurred by a service... organization (such as research institute, industry association, foundation, university, engineering company or similar contractor) in pursuing research, development, and demonstration activities including experiment...

Naming in a Programming Support Environment.

DTIC Science & Technology

1984-02-01

and Control, 1974. 10. T. E. Cheatham. An Overview of the Harvard Program Development System. I; Software Engineering Environments, H. Hunke, Ed.. North...Holland Publishing Compary, 1981, pp. 253-266. 11. T. E. Cheatham. Comparing Programming Support Environments. In Software Engineering Environments...Company. 1981. Third Edition 16. F. DeRemer and H Kron Programming -inthe Large Versus Programming -in-theSmall. IEEE Transactions on Software Engineering

Tank Insulation

NASA Technical Reports Server (NTRS)

1979-01-01

For NASA's Apollo program, McDonnell Douglas Astronautics Company, Huntington Beach, California, developed and built the S-IVB, uppermost stage of the three-stage Saturn V moonbooster. An important part of the development task was fabrication of a tank to contain liquid hydrogen fuel for the stage's rocket engine. The liquid hydrogen had to be contained at the supercold temperature of 423 degrees below zero Fahrenheit. The tank had to be perfectly insulated to keep engine or solar heat from reaching the fuel; if the hydrogen were permitted to warm up, it would have boiled off, or converted to gaseous form, reducing the amount of fuel available to the engine. McDonnell Douglas' answer was a supereffective insulation called 3D, which consisted of a one-inch thickness of polyurethane foam reinforced in three dimensions with fiberglass threads. Over a 13-year development and construction period, the company built 30 tanks and never experienced a failure. Now, after years of additional development, an advanced version of 3D is finding application as part of a containment system for transporting Liquefied Natural Gas (LNG) by ship.

76 FR 14796 - Airworthiness Directives; General Electric Company CF6-45 and CF6-50 Series Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-18

... Airworthiness Directives; General Electric Company CF6-45 and CF6-50 Series Turbofan Engines AGENCY: Federal... airworthiness directive (AD) for General Electric Company (GE) CF6-45 and CF6-50 series turbofan engines. That..., and MD-10- 30F. The commenter stated that the proposed AD only listed these airplanes as a series. We...

TRUSS DETAILS. United Engineering Company Ltd., Alameda Shipyard. Includes crane ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

TRUSS DETAILS. United Engineering Company Ltd., Alameda Shipyard. Includes crane girder section. No architect noted. Drawn by Penney. Plan no. 2-N-7. March 10, 1942, no revisions. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76, item no. 22A. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Warehouse, 2900 Main Street, Alameda, Alameda County, CA

Modeling Code Is Helping Cleveland Develop New Products

NASA Technical Reports Server (NTRS)

1998-01-01

Master Builders, Inc., is a 350-person company in Cleveland, Ohio, that develops and markets specialty chemicals for the construction industry. Developing new products involves creating many potential samples and running numerous tests to characterize the samples' performance. Company engineers enlisted NASA's help to replace cumbersome physical testing with computer modeling of the samples' behavior. Since the NASA Lewis Research Center's Structures Division develops mathematical models and associated computation tools to analyze the deformation and failure of composite materials, its researchers began a two-phase effort to modify Lewis' Integrated Composite Analyzer (ICAN) software for Master Builders' use. Phase I has been completed, and Master Builders is pleased with the results. The company is now working to begin implementation of Phase II.

Corruption: Engineers are Victims, Perpetrators or Both?

PubMed

Pecujlija, M; Cosic, I; Nesic-Grubic, L; Drobnjak, S

2015-08-01

This study was conducted in Serbian companies on licensed engineers and in its first part included a total of 336 licensed engineers who voluntarily completed the questionnaires about their ethical orientation and attitudes toward corruption and in the second part 214 engineers who participated in the first survey, who voluntarily evaluated their company's business operations characteristics. This study has clearly shown that there is a direct significant influence of the engineer's ethical orientations and attitudes toward corruption on their evaluation of the characteristics of their respective companies regarding business operations. This research also clearly shows that only engineers with a strong deontological orientation, low ethical subjectivity, and strong readiness to fight corruption, low corruption acceptance and high awareness of corruption can successfully fight corruption, improve the business operations of their companies and make beneficial changes to society. Otherwise, they should be considered as corruption perpetrators, not just as its victims.

Creating to understand - developmental biology meets engineering in Paris.

PubMed

Kicheva, Anna; Rivron, Nicolas C

2017-03-01

In November 2016, developmental biologists, synthetic biologists and engineers gathered in Paris for a meeting called 'Engineering the embryo'. The participants shared an interest in exploring how synthetic systems can reveal new principles of embryonic development, and how the in vitro manipulation and modeling of development using stem cells can be used to integrate ideas and expertise from physics, developmental biology and tissue engineering. As we review here, the conference pinpointed some of the challenges arising at the intersection of these fields, along with great enthusiasm for finding new approaches and collaborations. © 2017. Published by The Company of Biologists Ltd.

Metabolic engineering: the ultimate paradigm for continuous pharmaceutical manufacturing.

PubMed

Yadav, Vikramaditya G; Stephanopoulos, Gregory

2014-07-01

Research and development (R&D) expenditures by pharmaceutical companies doubled over the past decade, yet candidate attrition rates and development times rose markedly during this period. Understandably, companies have begun downsizing their pipelines and diverting investments away from R&D in favor of manufacturing. It is estimated that transitioning to continuous manufacturing could enable companies to compete for a share in emerging markets. Accordingly, the model for continuous manufacturing that has emerged commences with the conversion of late-stage intermediates into the active pharmaceutical ingredient (API) in a series of continuous flow reactors, followed by continuous solid processing to form finished tablets. The use of flow reactions for API synthesis will certainly generate purer products at higher yields in shorter times compared to equivalent batch reactions. However, transitioning from batch to flow configuration simply alleviates transport limitations within the reaction milieu. As the catalogue of reactions used in flow syntheses is a subset of batch-based chemistries, molecules such as natural products will continue to evade drug prospectors. Also, it is uncertain whether flow synthesis can deliver improvements in the atom and energy economies of API production at the scales that would achieve the levels of revenue growth targeted by companies. Instead, it is argued that implementing metabolic engineering for the production of oxidized scaffolds as gateway molecules for flow-based addition of electrophiles is a more effective and scalable strategy for accessing natural product chemical space. This new paradigm for manufacturing, with metabolic engineering as its engine, would also permit rapid optimization of production variables and allow facile scale-up from gram to ton scale to meet material requirements for clinical trials, thus recasting manufacturing as a tool for discovery. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Saturn Apollo Program

NASA Image and Video Library

1967-01-01

The Saturn IB S-IVB (second) stages in storage at the Douglas Aircraft Company's Sacramento Test Operations Facility (SACTO) in Sacramento, California. Designed and developed by the Marshall Space Flight Center and the Douglas Aircraft Company, the S-IVB stage was powered by a single J-2 engine, which produced 200,000 pounds of thrust, later uprated to 230,000 pounds for the Saturn V launch vehicle.

Infrared Imaging Sharpens View in Critical Situations

NASA Technical Reports Server (NTRS)

2007-01-01

Innovative Engineering and Consulting (IEC) Infrared Systems, a leading developer of thermal imaging systems and night vision equipment, received a Glenn Alliance for Technology Exchange (GATE) award, half of which was in the form of additional NASA assistance for new product development. IEC Infrared Systems worked with electrical and optical engineers from Glenn's Diagnostics and Data Systems Branch to develop a commercial infrared imaging system that could differentiate the intensity of heat sources better than other commercial systems. The research resulted in two major thermal imaging solutions: NightStalkIR and IntrudIR Alert. These systems are being used in the United States and abroad to help locate personnel stranded in emergency situations, defend soldiers on the battlefield abroad, and protect high-value facilities and operations. The company is also applying its advanced thermal imaging techniques to medical and pharmaceutical product development with a Cleveland-based pharmaceutical company.

74. ARAII. Dr. William Zinn of combustion engineering company and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

74. ARA-II. Dr. William Zinn of combustion engineering company and others at controls of SL-1. August 8, 1959. Ineel photo no. 59-4109. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

3. ELEVATIONS, ADDITION TO POWER HOUSE. United Engineering Company Ltd., ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. ELEVATIONS, ADDITION TO POWER HOUSE. United Engineering Company Ltd., Alameda Shipyard. John Hudspeth, architect, foot of Main Street, Alameda, California. Sheet 4. Plan no. 10,548. Scale 1/4 inch to the foot, elevations, and one inch to the foot, sections and details. April 30, 1945, last revised 6/19/45. pencil on vellum - United Engineering Company Shipyard, Boiler House, 2900 Main Street, Alameda, Alameda County, CA

14. DREDGING MAP. United Engineering Company Ltd., Alameda Shipyard. Ship ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. DREDGING MAP. United Engineering Company Ltd., Alameda Shipyard. Ship repair facilities dredging map. No architect noted. Drawn by "J.H." (John Hudspeth?). Sheet 1. Plan no. 10,529. Scale one inch to 50 feet. September 22, 1943. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 18, 1943. blueprint - United Engineering Company Shipyard, 2900 Main Street, Alameda, Alameda County, CA

ALTERATIONS AND ADDITIONS TO THE GATE HOUSE, United Engineering Company ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ALTERATIONS AND ADDITIONS TO THE GATE HOUSE, United Engineering Company Ltd., Alameda Shipyard. Plan, elevations, and details of expanded structure. No architect noted. Drawn by "J.B.H." (John Hudspeth?). Sheet 2 of 2. Plan no. 10,504. Scale 1/4 inch to the foot. November 28, 1942, last revised 5/5/45. pencil on vellum - United Engineering Company Shipyard, Gate House, 2900 Main Street, Alameda, Alameda County, CA

The Effect of Material and Side Walls on Hull Deflection during a Blast Event

DTIC Science & Technology

2017-12-13

by Danielle Abell SURVICE Engineering Company 4695 Millennium Dr Belcamp, MD 21017 under contract W911QX-16-D-0014...Laboratory. The views and conclusions contained in this document are those of SURVICE Engineering Company and the US Army Research Laboratory. Citation... Engineering Company 4695 Millennium Dr Belcamp, MD 21017 under contract W911QX-16-D-0014 Approved for public release

Development of an Industrial Engineering Project

ERIC Educational Resources Information Center

Moreno, Lorenzo; Gonzalez, Evelio; Acosta, Leopoldo; Toledo, Jonay; Marichal, Nicolas; Hamilton, Alberto; Sigut, Marta; Mendez, J. Albino; Hernandez, Sergio; Torres, Santiago

2005-01-01

This paper presents a teaching strategy of the scheduling and developmental phase of an Industrial Engineering computer project. It is based on a real project which has been carried out by our department in collaboration with a local company. The classroom setting provides an environment where students can experience firsthand all phases of the…

75 FR 21161 - Airworthiness Directives; General Electric Company (GE) CJ610 Series Turbojet Engines and CF700...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-23

... Airworthiness Directives; General Electric Company (GE) CJ610 Series Turbojet Engines and CF700 Series Turbofan... adopting a new airworthiness directive (AD) for GE CJ610 series turbojet engines and CF700 turbofan engines... part 39 with a proposed AD. The proposed AD applies to GE CJ610 series turbojet engines and CF700...

75 FR 46868 - Airworthiness Directives; The Boeing Company Model 747 Airplanes and Model 767 Airplanes Equipped...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-04

... crystal accretion. However, at this time, we do not agree to pursue research to develop an ice detector... significantly different type-design booster from that of the GE Model CF6-80C2 series engines (GE Model CF6-80A... events recorded on GE Model CF6-80A series engines. While this engine has a similar compressor design...

Advanced Material Nanotechnology in Israel

NASA Astrophysics Data System (ADS)

Figovsky, O.; Beilin, D.; Blank, N.

One of the most interesting directions in material engineering during the past few years is the technical development of nanocomposite materials consisting from two or more phases with precise interphase border and nanostructured materials based on interpenetrated polymer network. Israel is one of world leaders in fundamental and industrial nanotechnology research, including fostering of start-up companies. Some important developments in the field of nanotechnology material engineering in Israel are summarized in the paper.

Cigarette company trade secrets are not secret: an analysis of reverse engineering reports in internal tobacco industry documents released as a result of litigation.

PubMed

Velicer, Clayton; Lempert, Lauren K; Glantz, Stanton

2015-09-01

Use previously secret tobacco industry documents to assess tobacco companies' routine claims of trade secret protection for information on cigarette ingredients, additives and construction made to regulatory agencies, as well as the companies' refusal to publicly disclose this information. We analysed previously secret tobacco industry documents available at (http://legacy.library.ucsf.edu) to identify 100 examples of seven major tobacco companies' reverse engineering of their competitors' brands between 1937 and 2001. These reverse engineering reports contain detailed data for 142 different measurements for at least two companies, including physical parameters of the cigarettes, tobacco types, humectants, additives, flavourings, and smoke constituents of competitors' cigarettes. These 100 documents were distributed to 564 employees, including top managers in domestic and foreign offices across multiple departments, including executive leadership, research and design, product development, marketing and legal. These documents reported new competitors' products, measured ingredient changes over time, and informed companies' decisions regarding ingredients in their own products. Because cigarette companies routinely analyse their competitors' cigarettes in great detail, this information is neither secret nor commercially valuable and, thus, does not meet the legal definition of a 'trade secret.' This information is only being kept 'secret' from the people consuming cigarettes and the scientific community. Public agencies should release this detailed information because it would provide valuable information about how ingredients affect addictiveness and toxicity, and would help the public health community and consumers better understand the impact of cigarette design on human health. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Performance of the Southern California Edison Company Stirling dish

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lopez, C.W.; Stone, K.W.

1993-10-01

McDonnell Douglas Astronautics Company (MDAC) and United Stirling AB of Sweden (USAB) formed a joint venture in 1982 to develop and produce a Stirling dish solar generating system. In this report, the six year development and testing program continued by the Southern California Edison Company (SCE) is described. Each Stirling dish module consists of a sun tracking dish concentrator developed by the MDAC and a Stirling engine driven power conversion unit (PCU) developed by USAB. The Stirling dish system demonstrated twice the peak and daily solar-to-electric conversion efficiency of any other system then under development. This system continues to setmore » the performance standard for solar to electric systems being developed in the early 1990`s. Test data are presented and used to estimate the performance of a commercial system.« less

Initial test results from a prototype, 20 kW helium charged Stirling engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clarke, M.A.; Taylor, D.R.

An alpha-configuration, helium charged Stirling engine with a predicted output of 20 kW indicated power has been developed by a British consortium of universities and industrial companies. The work performed by the Royal Naval Engineering College has been in computer assisted design and component testing, with future plans for full engine trials during 1984/85. The scope of this paper is to outline the data obtained during motoring trials of the engine block and crankcase assembly, together with details of modifications incorporated in the various components.

The energy efficient engine project

NASA Technical Reports Server (NTRS)

Macioce, L. E.; Schaefer, J. W.; Saunders, N. T.

1980-01-01

The Energy Efficient Engine Project is directed at providing, by 1984, the advanced technologies which could be used for a generation of fuel conservative turbofan engines. The project is conducted through contracts with the General Electric Company and Pratt and Whitney Aircraft. The scope of the entire project and the current status of these efforts are summarized. A description of the preliminary designs of the fully developed engines is included and the potential benefits of these advanced engines, as well as highlights of some of the component technology efforts conducted to date, are discussed.

40 CFR 1048.635 - What special provisions apply to branded engines?

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES... apply if you identify the name and trademark of another company instead of your own on your emission... the other company that obligates that company to take the following steps: (1) Meet the emission...

40 CFR 1048.635 - What special provisions apply to branded engines?

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES... apply if you identify the name and trademark of another company instead of your own on your emission... the other company that obligates that company to take the following steps: (1) Meet the emission...

40 CFR 1048.635 - What special provisions apply to branded engines?

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES... apply if you identify the name and trademark of another company instead of your own on your emission... the other company that obligates that company to take the following steps: (1) Meet the emission...

40 CFR 1048.635 - What special provisions apply to branded engines?

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES... apply if you identify the name and trademark of another company instead of your own on your emission... the other company that obligates that company to take the following steps: (1) Meet the emission...

KSC-2013-4198

NASA Image and Video Library

2013-11-20

VAN HORN, Texas – Blue Origin test fires a powerful new hydrogen- and oxygen-fueled American rocket engine at the company's West Texas facility. During the test, the BE-3 engine fired at full power for more than two minutes to simulate a launch, then paused for about four minutes, mimicking a coast through space before it re-ignited for a brief final burn. The last phase of the test covered the work the engine could perform in landing the booster back softly on Earth. Blue Origin, a partner of NASA’s Commercial Crew Program, or CCP, is developing its Orbital Launch Vehicle, which could eventually be used to launch the company's Space Vehicle into orbit to transport crew and cargo to low-Earth orbit. CCP is aiding in the innovation and development of American-led commercial capabilities for crew transportation and rescue services to and from the station and other low-Earth orbit destinations by the end of 2017. For information about CCP, visit www.nasa.gov/commercialcrew. Photo credit: NASA/Lauren Harnett

KSC-2013-4124

NASA Image and Video Library

2013-11-20

VAN HORN, Texas – Blue Origin test fires a powerful new hydrogen- and oxygen-fueled American rocket engine at the company's West Texas facility. During the test, the BE-3 engine fired at full power for more than two minutes to simulate a launch, then paused for about four minutes, mimicking a coast through space before it re-ignited for a brief final burn. The last phase of the test covered the work the engine could perform in landing the booster back softly on Earth. Blue Origin, a partner of NASA’s Commercial Crew Program, or CCP, is developing its Orbital Launch Vehicle, which could eventually be used to launch the company's Space Vehicle into orbit to transport crew and cargo to low-Earth orbit. CCP is aiding in the innovation and development of American-led commercial capabilities for crew transportation and rescue services to and from the station and other low-Earth orbit destinations by the end of 2017. For information about CCP, visit www.nasa.gov/commercialcrew. Photo credit: Blue Origin

Challenges for Product Roadmapping in Inter-company Collaboration

NASA Astrophysics Data System (ADS)

Suomalainen, Tanja; Tihinen, Maarit; Parviainen, Päivi

Product roadmapping is a critical activity in product development, as it provides a link between business aspects and requirements engineering and thus helps to manage a high-level view of the company’s products. Nowadays, inter-company collaboration, such as outsourcing, is a common way of developing software products, as through collaboration, organisations gain advantages, such as flexibility with in-house resources, savings in product development costs and gain a physical presence in important markets. The role of product roadmapping becomes even more critical in collaborative settings, since different companies need to align strategies and work together to create products. In order to support companies in improving their own product roadmapping processes, this paper first gives an overview of product roadmapping and then discusses in detail an empirical study of the current practices in industry. The presented results particularly focus on the most challenging and important activities of product roadmapping in collaboration.

77 FR 58471 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-21

... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA.../P1, GEnx-1B75/P1, GEnx- 2B67, and GEnx-2B67B turbofan engines. This AD requires initial and... this AD will affect 11 GE GEnx turbofan engines installed on airplanes of U.S. registry. We also...

Factors that Influence First-Career Choice of Undergraduate Engineers in Software Services Companies: A South Indian Experience

ERIC Educational Resources Information Center

Gokuladas, V. K.

2010-01-01

Purpose: The purpose of this paper is to identify how undergraduate engineering students differ in their perception about software services companies in India based on variables like gender, locations of the college and branches of engineering. Design/methodology/approach: Data obtained from 560 undergraduate engineering students who had the…

Introducing Decision Making under Uncertainty and Strategic Considerations in Engineering Design

ERIC Educational Resources Information Center

Kosmopoulou, Georgia; Jog, Chintamani; Freeman, Margaret; Papavassiliou, Dimitrios V.

2010-01-01

Chemical Engineering graduates will face challenges at the workplace that even their peers who graduated a few years ago were not expected to face. One such major challenge is the management and operation of companies and plants under conditions of uncertainty and the need to make decisions in competitive situations. Modern developments in…

77 FR 10950 - Airworthiness Directives; General Electric Company (GE) Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-24

...) for all GE CF6-80C2B series turbofan engines. That AD currently requires installing software version 8.... This new AD requires the removal of the affected ECUs from service. This AD was prompted by two reports... ECUs from service. Comments We gave the public the opportunity to participate in developing this AD...

Perm State University HPC-hardware and software services: capabilities for aircraft engine aeroacoustics problems solving

NASA Astrophysics Data System (ADS)

Demenev, A. G.

2018-02-01

The present work is devoted to analyze high-performance computing (HPC) infrastructure capabilities for aircraft engine aeroacoustics problems solving at Perm State University. We explore here the ability to develop new computational aeroacoustics methods/solvers for computer-aided engineering (CAE) systems to handle complicated industrial problems of engine noise prediction. Leading aircraft engine engineering company, including “UEC-Aviadvigatel” JSC (our industrial partners in Perm, Russia), require that methods/solvers to optimize geometry of aircraft engine for fan noise reduction. We analysed Perm State University HPC-hardware resources and software services to use efficiently. The performed results demonstrate that Perm State University HPC-infrastructure are mature enough to face out industrial-like problems of development CAE-system with HPC-method and CFD-solvers.

75 FR 28188 - Airworthiness Directives; General Electric Company CF34-1A, -3A, -3A1, -3A2, -3B, and -3B1...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-20

... Frost, Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller Directorate, 12 New..., Massachusetts, on May 10, 2010. Peter A. White, Assistant Manager, Engine and Propeller Directorate, Aircraft... Airworthiness Directives; General Electric Company CF34-1A, -3A, -3A1, -3A2, -3B, and -3B1 Turbofan Engines...

Engineering English and the High-Tech Industry: A Case Study of an English Needs Analysis of Process Integration Engineers at a Semiconductor Manufacturing Company in Taiwan

ERIC Educational Resources Information Center

Spence, Paul; Liu, Gi-Zen

2013-01-01

The global high-tech industry is characterized by extreme competitiveness, innovation, and widespread use of English. Consequently, Taiwanese high-tech companies require engineers that are talented in both their engineering and English abilities. In response to the lack of knowledge regarding the English skills needed by engineers in Taiwan's…

40 CFR 1054.640 - What special provisions apply to branded engines?

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND... following provisions apply if you identify the name and trademark of another company instead of your own on... contractual agreement with the other company that obligates that company to take the following steps: (1) Meet...

40 CFR 1054.640 - What special provisions apply to branded engines?

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND... following provisions apply if you identify the name and trademark of another company instead of your own on... contractual agreement with the other company that obligates that company to take the following steps: (1) Meet...

40 CFR 1054.640 - What special provisions apply to branded engines?

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND... following provisions apply if you identify the name and trademark of another company instead of your own on... contractual agreement with the other company that obligates that company to take the following steps: (1) Meet...

40 CFR 1054.640 - What special provisions apply to branded engines?

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, SMALL NONROAD SPARK-IGNITION ENGINES AND... following provisions apply if you identify the name and trademark of another company instead of your own on... contractual agreement with the other company that obligates that company to take the following steps: (1) Meet...

System engineering of aerospace and advanced technology programs at an astronautics company (record of study)

NASA Astrophysics Data System (ADS)

Kennedy, Mike O.

An internship with the Martin Marietta Astronautics Group that was performed in partial fulfillment of the requirements for the Doctor of Engineering degree is documented. The internship included assignments with two Martin Marietta companies, on three different programs and in four areas of engineering. A first-hand look is taken at system engineering, SDI and advanced program management, and the way Martin Marietta conducts business. The five internship objectives were related to assignments in system modeling, system integration, engineering analysis and technical management: (1) The effects of thermally and mechanically induced mirror surface distortions upon the wavefront intensity field of a high energy laser beam passing through the optical train of a space-based laser system were modeled. (2) The restrictive as opposed to the broad interpretation of the 1972 ABM Treaty, and the capability of the Strategic Defense Initiative Zenith Star Program to comply with the Treaty were evaluated. (3) The capability of Martin Marietta to develop an automated analysis system to integrate and analyze Superconducting Super Collider detector designs was investigated. (4) The thermal models that were developed in support of the Small Intercontinental Ballistic Missile flight tests were described. (5) The technical management role of the Product Integrity Engineer assigned to the Zenith Star spacecraft's Beam Control and Transfer Subsystem was discussed. The relationships between the engineering, business, security and social concerns associated with the practice of engineering and the management of programs by a major defense contractor are explored.

SPARTNIK: Engineering catalyst for government and industry

NASA Technical Reports Server (NTRS)

Prass, James D.; Romano, Thomas C.; Hunter, Jeanine M.

1995-01-01

Industrial demands for highly motivated and competent technical personnel to carry forward with the technological goals of the US has posed a significant challenge to graduating engineers. While curricula has improved and diversified over time to meet these industry demands, relevant industry experience is not always available to undergraduates. The microsatellite development program at San Jose State University (SJSU) has allowed an entire undergraduate senior class to utilize a broad range of training and education to refine their engineering skills, bringing them closer to becoming engineering professionals. Close interaction with industry mentors and manufacturers on a real world project provides a significant advantage to educators and students alike. With support from companies and government agencies, the students have designed and manufactured a microsatellite, designed to be launched into a low Earth orbit. This satellite will gather telemetry for characterizing the state of the spacecraft. This will enable the students to have a physical check on their predicted value of spacecraft subsystem performance. Additional experiments will also be undertaken during the two year lifetime, including micro-meteorite impact sensing and capturing digital color images of the Earth. This paper will detail the process whereby students designed, prototype and manufactured a small satellite in a large team environment, along with the experiments that will be performed on board. With the project's limited funds, it needed the support of many industry companies to help with technical issues and hardware acquisition. Among the many supporting companies, NASA's space shuttle small payloads program could be used for an affordable launch vehicle for the student project. The paper address these collaborations between the student project and industry support, as well as explaining the benefits to both. The paper draws conclusion on how these types of student projects can be used by industry as a feasible resource for developing small platforms for space based experiments, as well as increasing the practical experience and engineering knowledge of graduating students. These benefits to industry and universities, can lead to a close working relationship between the two. These types of projects can facilitate the development of low-cost space rated parts to be used by the industry and university projects. It can also help with the understanding and use of acceptable risk non-space rated parts reducing the cost of the spacecraft. This will lead to the development of low cost platforms for space based experiments, providing research companies an inexpensive, long duration platform to conduct their in-space experiments, while better preparing engineering undergraduates for their transition into the work force.

SPARTNIK: Engineering catalyst for government and industry

NASA Astrophysics Data System (ADS)

Prass, James D.; Romano, Thomas C.; Hunter, Jeanine M.

1995-09-01

Industrial demands for highly motivated and competent technical personnel to carry forward with the technological goals of the US has posed a significant challenge to graduating engineers. While curricula has improved and diversified over time to meet these industry demands, relevant industry experience is not always available to undergraduates. The microsatellite development program at San Jose State University (SJSU) has allowed an entire undergraduate senior class to utilize a broad range of training and education to refine their engineering skills, bringing them closer to becoming engineering professionals. Close interaction with industry mentors and manufacturers on a real world project provides a significant advantage to educators and students alike. With support from companies and government agencies, the students have designed and manufactured a microsatellite, designed to be launched into a low Earth orbit. This satellite will gather telemetry for characterizing the state of the spacecraft. This will enable the students to have a physical check on their predicted value of spacecraft subsystem performance. Additional experiments will also be undertaken during the two year lifetime, including micro-meteorite impact sensing and capturing digital color images of the Earth. This paper will detail the process whereby students designed, prototype and manufactured a small satellite in a large team environment, along with the experiments that will be performed on board. With the project's limited funds, it needed the support of many industry companies to help with technical issues and hardware acquisition. Among the many supporting companies, NASA's space shuttle small payloads program could be used for an affordable launch vehicle for the student project. The paper address these collaborations between the student project and industry support, as well as explaining the benefits to both. The paper draws conclusion on how these types of student projects can be used by industry as a feasible resource for developing small platforms for space based experiments, as well as increasing the practical experience and engineering knowledge of graduating students. These benefits to industry and universities, can lead to a close working relationship between the two. These types of projects can facilitate the development of low-cost space rated parts to be used by the industry and university projects. It can also help with the understanding and use of acceptable risk non-space rated parts reducing the cost of the spacecraft. This will lead to the development of low cost platforms for space based experiments, providing research companies an inexpensive, long duration platform to conduct their in-space experiments, while better preparing engineering undergraduates for their transition into the work force.

WAREHOUSE END FRAMING. United Engineering Company Ltd., Alameda Shipyard. Sections ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

WAREHOUSE END FRAMING. United Engineering Company Ltd., Alameda Shipyard. Sections at north and detail sections. No architect noted. Drawn by Penney. Plan no. 2-N-9 (U.E. Co. plan no. 10,523). Scales 1/4 inch and 1 inch to the foot. March 10, 1942, no revisions. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76, item no. 22A. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Warehouse, 2900 Main Street, Alameda, Alameda County, CA

Building Safer Systems With SpecTRM

NASA Technical Reports Server (NTRS)

2003-01-01

System safety, an integral component in software development, often poses a challenge to engineers designing computer-based systems. While the relaxed constraints on software design allow for increased power and flexibility, this flexibility introduces more possibilities for error. As a result, system engineers must identify the design constraints necessary to maintain safety and ensure that the system and software design enforces them. Safeware Engineering Corporation, of Seattle, Washington, provides the information, tools, and techniques to accomplish this task with its Specification Tools and Requirements Methodology (SpecTRM). NASA assisted in developing this engineering toolset by awarding the company several Small Business Innovation Research (SBIR) contracts with Ames Research Center and Langley Research Center. The technology benefits NASA through its applications for Space Station rendezvous and docking. SpecTRM aids system and software engineers in developing specifications for large, complex safety critical systems. The product enables engineers to find errors early in development so that they can be fixed with the lowest cost and impact on the system design. SpecTRM traces both the requirements and design rationale (including safety constraints) throughout the system design and documentation, allowing engineers to build required system properties into the design from the beginning, rather than emphasizing assessment at the end of the development process when changes are limited and costly.System safety, an integral component in software development, often poses a challenge to engineers designing computer-based systems. While the relaxed constraints on software design allow for increased power and flexibility, this flexibility introduces more possibilities for error. As a result, system engineers must identify the design constraints necessary to maintain safety and ensure that the system and software design enforces them. Safeware Engineering Corporation, of Seattle, Washington, provides the information, tools, and techniques to accomplish this task with its Specification Tools and Requirements Methodology (SpecTRM). NASA assisted in developing this engineering toolset by awarding the company several Small Business Innovation Research (SBIR) contracts with Ames Research Center and Langley Research Center. The technology benefits NASA through its applications for Space Station rendezvous and docking. SpecTRM aids system and software engineers in developing specifications for large, complex safety critical systems. The product enables engineers to find errors early in development so that they can be fixed with the lowest cost and impact on the system design. SpecTRM traces both the requirements and design rationale (including safety constraints) throughout the system design and documentation, allowing engineers to build required system properties into the design from the beginning, rather than emphasizing assessment at the end of the development process when changes are limited and costly.

75 FR 52982 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-30

... Boeing Company, St. Louis, MO February 24, 2009. Engineering Operations, etc., Off-Site Workers Reporting to St. Louis, MO. 73,635A The Boeing Company, St. Charles, MO February 24, 2009. Engineering... 24, 2009. Engineering Operations & Technology Div. & Information Technology Div. 73,753 Lodging by...

Improving Performance Of Industrial Enterprises With CGT

NASA Astrophysics Data System (ADS)

Dolgih, I. N.; Bannova, K. A.; Kuzmina, N. A.; Zdanova, A. B.

2016-04-01

At the present day, a falling in the overall level of efficiency production activities, especially in the machine-building companies makes it necessary to development various actions in the State support, including through the creation consolidated taxation system. Such support will help improve efficiency of activity not only the industrial companies, but also will allow improve economic and social situation in regions where often large engineering factories is city-forming.

Product development: the making of the Abbott ARCHITECT.

PubMed

Kisner, H J

1997-01-01

Many laboratorians have a limited perspective on what is involved in developing an instrument and bringing it to market. This article traces the product development process used by Abbott Diagnostics Division that resulted in Abbott being named the 1996 Concurrent Engineering Company of the Year for the design of the ARCHITECT.

75 FR 22693 - Airworthiness Directives; General Electric Company (GE) CF34-1A, CF34-3A, and CF34-3B Series...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-30

..., Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller Directorate, 12 New England... Directives; General Electric Company (GE) CF34-1A, CF34-3A, and CF34-3B Series Turbofan Engines; Correction... to GE CF34-1A, CF34-3A, and CF34-3B series turbofan engines. The docket number is incorrect in all...

Proposal for a Conceptual Model for Evaluating Lean Product Development Performance: A Study of LPD Enablers in Manufacturing Companies

NASA Astrophysics Data System (ADS)

Osezua Aikhuele, Daniel; Mohd Turan, Faiz

2016-02-01

The instability in today's market and the emerging demands for mass customized products by customers, are driving companies to seek for cost effective and time efficient improvements in their production system and this have led to real pressure for the adaptation of new developmental architecture and operational parameters to remain competitive in the market. Among such developmental architecture adopted, is the integration of lean thinking in the product development process. However, due to lack of clear understanding of the lean performance and its measurements, many companies are unable to implement and fully integrate the lean principle into their product development process and without a proper performance measurement, the performance level of the organizational value stream will be unknown and the specific area of improvement as it relates to the LPD program cannot be tracked. Hence, it will result in poor decision making in the LPD implementation. This paper therefore seeks to present a conceptual model for evaluation of LPD performances by identifying and analysing the core existing LPD enabler (Chief Engineer, Cross-functional teams, Set-based engineering, Poka-yoke (mistakeproofing), Knowledge-based environment, Value-focused planning and development, Top management support, Technology, Supplier integration, Workforce commitment and Continuous improvement culture) for assessing the LPD performance.

Lea's Pies

NASA Technical Reports Server (NTRS)

1996-01-01

The Technology Transfer Office at Stennis Space Center worked with a pie company owner to develop an inexpensive container that would protect pies and keep them in a near frozen condition for shipping in 48 hours. A NASA engineer made a thermal barrier envelope from a metalized mylar called 'space blanket material,' developed during the Apollo era. The envelope protects the pies from heat transfer. Pictured, a NASA engineer removes the temperature logger from a pecan pie shipped to him in a prototype envelope.

Shuttle Engine Designs Revolutionize Solar Power

NASA Technical Reports Server (NTRS)

2014-01-01

The Space Shuttle Main Engine was built under contract to Marshall Space Flight Center by Rocketdyne, now part of Pratt & Whitney Rocketdyne (PWR). PWR applied its NASA experience to solar power technology and licensed the technology to Santa Monica, California-based SolarReserve. The company now develops concentrating solar power projects, including a plant in Nevada that has created 4,300 jobs during construction.

A New Archive and Internet Search Engine May Change the Nature of On-Line Research.

ERIC Educational Resources Information Center

Selingo, Jeffrey

1998-01-01

In the process of trying to preserve Internet history by archiving it, a company has developed a powerful Internet search engine that provides information on Web site usage patterns, which can act as a relatively objective source of information about information sources and can link sources that a researcher might otherwise miss. However, issues…

78 FR 28719 - Special Conditions: Cessna Aircraft Company, Model J182T; Diesel Cycle Engine Installation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-16

...; Special Conditions No. 23-259-SC] Special Conditions: Cessna Aircraft Company, Model J182T; Diesel Cycle..., air cooled, diesel cycle engine that uses turbine (jet) fuel. The Model No. J182T, which is a... engine airplane with a cantilever high wing, with the SMA SR305- 230E-C1 diesel cycle engine and...

Final Technical Report: Hydrogen Energy in Engineering Education (H2E3)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lehman, Peter A.; Cashman, Eileen; Lipman, Timothy

2011-09-15

Schatz Energy Research Center's Hydrogen Energy in Engineering Education curriculum development project delivered hydrogen energy and fuel cell learning experiences to over 1,000 undergraduate engineering students at five California universities, provided follow-on internships for students at a fuel cell company; and developed commercializable hydrogen teaching tools including a fuel cell test station and a fuel cell/electrolyzer experiment kit. Monitoring and evaluation tracked student learning and faculty and student opinions of the curriculum, showing that use of the curriculum did advance student comprehension of hydrogen fundamentals. The project web site (hydrogencurriculum.org) provides more information.

NASA Chief Technologist Douglas Terrier Tours Jacobs' Engineering Development Facility

NASA Image and Video Library

2017-08-10

NASA Chief Technologist Douglas Terrier joins Jacobs General Manager Lon Miller during a tour of the company's Engineering Development Facility in Houston. Jacobs provides advanced technologies used aboard the International Space Station and for deep space exploration. From left: NASA’s Johnson Space Center Chief Technologist Chris Culbert, Chief Technologist Douglas Terrier, Jacobs Clear Lake Group Deputy General Manager Joy Kelly and Jacobs Clear Lake Group General Manager Lon Miller. Date: 08-10-2017 Location: B1 & Jacobs Engineering Subject: NASA Acting Chief Technology Officer Douglas Terrier Tours JSC and Jacobs Photographer: David DeHoyos

Development of a Thermoacoustic Stirling Engine Technology Demonstrator

NASA Astrophysics Data System (ADS)

Reissner, Alexander; Gerger, Joachim; Hummel, Stefan; Reißig, Jannis; Pawelke, Roland

2014-08-01

Waste heat is a primary source of energy loss in many aerospace and terrestrial applications. FOTEC, an Austrian Research Company located in Wiener Neustadt, is presently developing a micro power converter, promising high efficiencies even for small- scale applications. The converter is based on an innovative thermoacoustic stirling engine concept without any moving parts. Such a maintenance-free engine system would be particularly suitable for advanced space power systems (radioisotope, waste heat) or even within the scope of terrestrial energy harvesting. This paper will summarizes the status of our ongoing efforts on this micro power converter technology.

Tools and Methods for Risk Management in Multi-Site Engineering Projects

NASA Astrophysics Data System (ADS)

Zhou, Mingwei; Nemes, Laszlo; Reidsema, Carl; Ahmed, Ammar; Kayis, Berman

In today's highly global business environment, engineering and manufacturing projects often involve two or more geographically dispersed units or departments, research centers or companies. This paper attempts to identify the requirements for risk management in a multi-site engineering project environment, and presents a review of the state-of-the-art tools and methods that can be used to manage risks in multi-site engineering projects. This leads to the development of a risk management roadmap, which will underpin the design and implementation of an intelligent risk mapping system.

Methods Used to Support a Life Cycle of Complex Engineering Products

NASA Astrophysics Data System (ADS)

Zakharova, Alexandra A.; Kolegova, Olga A.; Nekrasova, Maria E.; Eremenko, Andrey O.

2016-08-01

Management of companies involved in the design, development and operation of complex engineering products recognize the relevance of creating systems for product lifecycle management. A system of methods is proposed to support life cycles of complex engineering products, based on fuzzy set theory and hierarchical analysis. The system of methods serves to demonstrate the grounds for making strategic decisions in an environment of uncertainty, allows the use of expert knowledge, and provides interconnection of decisions at all phases of strategic management and all stages of a complex engineering product lifecycle.

Qualities Required from Engineers of the Global Times

NASA Astrophysics Data System (ADS)

Senuma, Takehide

In this paper, the qualities and characteristics required from an engineer who works globally are discussed based on my own experience of a joint research project with a European company. The most important qualities and characteristics are integrity, one‧s own initiative, basic and expert knowledge, creativity, communicative skills and broad world view. Having initiative seems to be especially significant but is a weak point of young engineers in Japan at present. Ways to develop students‧ initiative are discussed in detail from a view point of the engineering education.

New Norwegian HSE standard for the offshore industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huse, J.R.

1996-12-31

NORSOK (The competitive standing of the Norwegian offshore sector) is the Norwegian industry initiative to add value, reduce cost and lead time and remove unnecessary activities in offshore field developments and operations. The NORSOK standards are developed by the Norwegian petroleum industry as a part of the NORSOK initiative and are jointly issued by the Norwegian Oil Industry Association and the Federation of Norwegian Engineering Industries. The purpose of the industry standard is to replace the individual oil company specifications for use in existing and future petroleum industry developments, subject to the individual company`s review and application. The NORSOK Health,more » Safety and Environment (HSE) standards covers: Technical Safety, Working Environment, Environmental Care, HSE during Construction. The standards are now being used in ongoing offshore development projects, and the experience with standards shows that the principle aim is being met. The development of standards continues, implementing experience gained.« less

Steady-State Cycle Deck Launcher Developed for Numerical Propulsion System Simulation

NASA Technical Reports Server (NTRS)

VanDrei, Donald E.

1997-01-01

One of the objectives of NASA's High Performance Computing and Communications Program's (HPCCP) Numerical Propulsion System Simulation (NPSS) is to reduce the time and cost of generating aerothermal numerical representations of engines, called customer decks. These customer decks, which are delivered to airframe companies by various U.S. engine companies, numerically characterize an engine's performance as defined by the particular U.S. airframe manufacturer. Until recently, all numerical models were provided with a Fortran-compatible interface in compliance with the Society of Automotive Engineers (SAE) document AS681F, and data communication was performed via a standard, labeled common structure in compliance with AS681F. Recently, the SAE committee began to develop a new standard: AS681G. AS681G addresses multiple language requirements for customer decks along with alternative data communication techniques. Along with the SAE committee, the NPSS Steady-State Cycle Deck project team developed a standard Application Program Interface (API) supported by a graphical user interface. This work will result in Aerospace Recommended Practice 4868 (ARP4868). The Steady-State Cycle Deck work was validated against the Energy Efficient Engine customer deck, which is publicly available. The Energy Efficient Engine wrapper was used not only to validate ARP4868 but also to demonstrate how to wrap an existing customer deck. The graphical user interface for the Steady-State Cycle Deck facilitates the use of the new standard and makes it easier to design and analyze a customer deck. This software was developed following I. Jacobson's Object-Oriented Design methodology and is implemented in C++. The AS681G standard will establish a common generic interface for U.S. engine companies and airframe manufacturers. This will lead to more accurate cycle models, quicker model generation, and faster validation leading to specifications. The standard will facilitate cooperative work between industry and NASA. The NPSS Steady-State Cycle Deck team released a batch version of the Steady-State Cycle Deck in March 1996. Version 1.1 was released in June 1996. During fiscal 1997, NPSS accepted enhancements and modifications to the Steady-State Cycle Deck launcher. Consistent with NPSS' commercialization plan, these modifications will be done by a third party that can provide long-term software support.

Characterizing adoption of precautionary risk management guidance for nanomaterials, an emerging occupational hazard.

PubMed

Schubauer-Berigan, Mary K; Dahm, Matthew M; Schulte, Paul A; Hodson, Laura; Geraci, Charles L

2015-01-01

Exposure to engineered nanomaterials (substances with at least one dimension of 1-100 nm) has been of increased interest, with the recent growth in production and use of nanomaterials worldwide. Various organizations have recommended methods to minimize exposure to engineered nanomaterials. The purpose of this study was to evaluate available data to examine the extent to which studied U.S. companies (which represent a small fraction of all companies using certain forms of engineered nanomaterials) follow the guidelines for reducing occupational exposures to engineered nanomaterials that have been issued by the National Institute for Occupational Safety and Health (NIOSH) and other organizations. Survey data, field reports, and field notes for all NIOSH nanomaterial exposure assessments conducted between 2006 and 2011 were collected and reviewed to: (1) determine the level of adoption of precautionary guidance on engineering controls and personal protective equipment (PPE), and (2) evaluate the reliability of companies' self-reported use of engineering controls and PPE. Use of PPE was observed among 89% [95% confidence interval (CI): 76%-96%] of 46 visited companies, and use of containment-based engineering controls for at least some processes was observed among 83% (95% CI: 76%-96%). In on-site evaluations, more than 90% of the 16 engineered carbonaceous nanomaterial companies that responded to an industrywide survey were observed to be using engineering controls and PPE as reported or more stringently than reported. Since PPE use was slightly more prevalent than engineering controls, better communication may be necessary to reinforce the importance of the hierarchy of controls. These findings may also be useful in conducting exposure assessment and epidemiologic research among U.S. workers handling nanomaterials.

Pharmaceutical company internet sites as sources of information about antidepressant medications.

PubMed

Graber, Mark A; Weckmann, Michelle

2002-01-01

To determine the informational content of nine pharmaceutical company websites about the antidepressant medication marketed by the company. A structured, explicit review of materials found on pharmaceutical company websites about nine antidepressants for which no generic drug is available was conducted using eight popular search engines. The accessibility of these websites was also determined using these search engines. Of 72 searches (one for each drug using each search engine), 46 yielded the pharmaceutical company website within the top 10 links. When outliers were removed, the company website was found in the top 10 links for 45 of 56 searches. All of the websites contain information of an advertising and emotive nature. Of the nine company websites, three contain anecdotal information; only two mention electroconvulsive therapy and four mention other types of drug therapy; and only one mentions the tradenames of other drugs. None of the websites mention drug costs, only one has efficacy statistics for the company's drug and, although all of the websites mention at least one adverse effect of the company's drug, only one lists percentages for adverse effects. The information about drugs for treating depression on pharmaceutical company websites aimed at consumers is limited and makes it difficult for consumers to compare drugs.

13. INTERIOR OF DOUBLE ENGINE BLOWER. IN BLOWER HOUSE, LOOKING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. INTERIOR OF DOUBLE ENGINE BLOWER. IN BLOWER HOUSE, LOOKING WEST. FANS MADE BY THE BUCKEY BLOWER COMPANY OF COLUMBUS, OHIO. - Jenkins Brick Company, Plant No. 2, Furnace Street, Montgomery, Montgomery County, AL

California four cities program, 1971 - 1973. [aerospace-to-urban technology application

NASA Technical Reports Server (NTRS)

Macomber, H. L.; Wilson, J. H.

1974-01-01

A pilot project in aerospace-to-urban technology application is reported. Companies assigned senior engineering professionals to serve as Science and Technology Advisors to participating city governments. Technical support was provided by the companies and JPL. The cities, Anaheim, Fresno, Pasadena, and San Hose, California, provided the working environment and general service support. Each city/company team developed and carried out one or more technical or management pilot projects together with a number of less formalized technology efforts and studies. An account and evaluation is provided of the initial two-year phase of the program.

EXTERIOR ELEVATIONS. United Engineering Company Ltd., Alameda Shipyard, Ship Repair ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

EXTERIOR ELEVATIONS. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities, Office Building. Includes lettering detail for front elevation. John Hudspeth, Architect, at foot of Main Street, Alameda, Calif. Sheet no. A3 of 8 sheets, Plan no. 10,007. Scale 1/8 inch to the foot. March 18, 1942, last revised 9/21/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Office Building No. 137, 2900 Main Street, Alameda, Alameda County, CA

PLANS & ELEVATIONS. United Engineering Company Ltd., Alameda Shipyard. Also ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PLANS & ELEVATIONS. United Engineering Company Ltd., Alameda Shipyard. Also includes door schedule and a small scale plot plan. No architect noted. Drawn by W.H.H. Plan no. 2-N-5 (U.E. Co. plan no. 10,523). Scale 1/8 inch to the foot. March 10, 1942, last revised 10/6/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76, item no. 22A. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Warehouse, 2900 Main Street, Alameda, Alameda County, CA

SECOND FLOOR AND ROOF PLANS. United Engineering Company Ltd., Alameda ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

SECOND FLOOR AND ROOF PLANS. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities, Office Building. Second floor plan, and roof plan. John Hudspeth, Architect, at foot of Main Street, Alameda, Calif. Sheet no. A2 of 8 sheets, Plan no. 10,007. Scale 1/8 inch to the foot. March 18, 1942, last revised 9/22/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Office Building No. 137, 2900 Main Street, Alameda, Alameda County, CA

76 FR 27282 - Airworthiness Directives; General Electric Company CF34-10E2A1; CF34-10E5, CF34-10E5A1; CF34-10E6...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-11

... methods: Federal eRulemaking Portal: Go to http://www.regulations.gov . Follow the instructions for... Investigation of a General Electric Company (GE) CF34-10E turbofan engine experiencing high fan frame vibrations... likely to exist or develop in other products of the same type design. Proposed AD Requirements This...

Avionics Simulation, Development and Software Engineering

NASA Technical Reports Server (NTRS)

2002-01-01

During this reporting period, all technical responsibilities were accomplished as planned. A close working relationship was maintained with personnel of the MSFC Avionics Department Software Group (ED14), the MSFC EXPRESS Project Office (FD31), and the Huntsville Boeing Company. Accomplishments included: performing special tasks; supporting Software Review Board (SRB), Avionics Test Bed (ATB), and EXPRESS Software Control Panel (ESCP) activities; participating in technical meetings; and coordinating issues between the Boeing Company and the MSFC Project Office.

24 CFR 3286.3 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... otherwise, corporations, companies, associations, firms, partnerships, societies, and joint stock companies... creative work requiring education, training, and experience in architecture or engineering sciences and the application of special knowledge of the mathematical, physical, and engineering sciences in such professional...

24 CFR 3286.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... otherwise, corporations, companies, associations, firms, partnerships, societies, and joint stock companies... creative work requiring education, training, and experience in architecture or engineering sciences and the application of special knowledge of the mathematical, physical, and engineering sciences in such professional...

24 CFR 3286.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... otherwise, corporations, companies, associations, firms, partnerships, societies, and joint stock companies... creative work requiring education, training, and experience in architecture or engineering sciences and the application of special knowledge of the mathematical, physical, and engineering sciences in such professional...

24 CFR 3286.3 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... otherwise, corporations, companies, associations, firms, partnerships, societies, and joint stock companies... creative work requiring education, training, and experience in architecture or engineering sciences and the application of special knowledge of the mathematical, physical, and engineering sciences in such professional...

Competitive intelligence information management and innovation in small technology-based companies

NASA Astrophysics Data System (ADS)

Tanev, Stoyan

2007-05-01

In this article we examine how (i) company type and (ii) the competitive intelligence information used by small technology-based companies affect their innovation performance. The focus is on the specific information types used and not on the information sources. Information topics are classified in four groups - customers (10), company (9), competitor (11) and industry (12). The sample consists of 45 small new technology-based companies, specialized suppliers, and service companies from a variety of sectors - software, photonics, telecommunications, biomedical engineering and biotech, traditional manufacturing etc. The results suggest that the total number of intelligence information topics companies use to make decisions about innovation is not associated with the number of their new products, processes, services and patents. Therefore the companies in our sample do not seem to have the resources, processes or value systems required to use different competitive intelligence information when making decisions on innovation or may rely more on their own internal logic than on external information. Companies are classified using a Pavitt-like taxonomy. Service companies are considered as a separate company type. This allows for explicitly studying both, the innovative role of new services in product driven companies, and the role of new product development in service companies.

Critical needs for piston engine overhaul centre in Malaysia

NASA Astrophysics Data System (ADS)

Khairuddin, M. H.; Yahya, M. Y.; Johari, M. K.

2017-12-01

Piston engine overhaul centre (PEOC) is the branch of aviation Maintenance, Repair and Overhaul (MRO) providers, which plays a pivotal role in maintaining the fleet of business and commercial aircraft in the world. The centre typically offers three main MRO capabilities: airframe, engine and component services. Companies holding a PEOC(s) are all subjected to stringent procedures and conditions regulated and audited by the International Civil Aviation Organization. Currently, piston engine maintenance and repair for Asian countries is conducted only in Singapore. The focus of this study is to establish the needs for a PEOC in Malaysia, which will cater almost all small local aircraft companies such as transport and flying school companies.

KSC-2013-4164

NASA Image and Video Library

2013-11-20

VAN HORN, Texas – Blue Origin’s test stand, back right, is framed by a wind mill at the company’s West Texas facility. The company used this test stand to fire its powerful new hydrogen- and oxygen-fueled American rocket engine, the BE-3. The engine fired at full power for more than two minutes to simulate a launch, then paused for about four minutes, mimicking a coast through space before it re-ignited for a brief final burn. The last phase of the test covered the work the engine could perform in landing the booster back softly on Earth. Blue Origin, a partner of NASA’s Commercial Crew Program, or CCP, is developing its Orbital Launch Vehicle, which could eventually be used to launch the company's Space Vehicle into orbit to transport crew and cargo to low-Earth orbit. CCP is aiding in the innovation and development of American-led commercial capabilities for crew transportation and rescue services to and from the station and other low-Earth orbit destinations by the end of 2017. For information about CCP, visit www.nasa.gov/commercialcrew. Photo credit: NASA/Lauren Harnett

Definitional-mission report: Combined-cycle power plant, Sultan Iskandar Power Station Phase 2-B, Tenaga Nasional BHD, Malaysia. Export trade information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kadagathur, G.

1990-12-10

Tenaga Nasional BHD (TEN) formerly known as National Electricity Board of Malaysia is proposing to construct a Combined Cycle Power Plant at Pasir Gudang. The project is known as Sultan Iskandar Power Station Phase 2 (SIPS-2). U.S. engineering companies and U.S. equipment manufacturers are having difficulty in procuring contracts from the Malaysian Power Industry. To date, the industry is dominated by consortia with British and Swiss participation. Several U.S. engineering companies have approached the US Trade and Development Program (TDP) to assist them in breaking into the Malaysian utility market by supporting their effort on their current proposals for SIPS-2more » project. It is recommended that TDP should approve a grant to TEN that would provide funds for engineering upto the preparation of equipment specifications and associated technology transfer. The grant along with the weak dollar should be attractive enough for TEN to strongly consider consortia with U.S. companies very favorably. The project also offers a potential for the export of U.S. manufactured equipment in the range of $170 million.« less

NCC: A Multidisciplinary Design/Analysis Tool for Combustion Systems

NASA Technical Reports Server (NTRS)

Liu, Nan-Suey; Quealy, Angela

1999-01-01

A multi-disciplinary design/analysis tool for combustion systems is critical for optimizing the low-emission, high-performance combustor design process. Based on discussions between NASA Lewis Research Center and the jet engine companies, an industry-government team was formed in early 1995 to develop the National Combustion Code (NCC), which is an integrated system of computer codes for the design and analysis of combustion systems. NCC has advanced features that address the need to meet designer's requirements such as "assured accuracy", "fast turnaround", and "acceptable cost". The NCC development team is comprised of Allison Engine Company (Allison), CFD Research Corporation (CFDRC), GE Aircraft Engines (GEAE), NASA Lewis Research Center (LeRC), and Pratt & Whitney (P&W). This development team operates under the guidance of the NCC steering committee. The "unstructured mesh" capability and "parallel computing" are fundamental features of NCC from its inception. The NCC system is composed of a set of "elements" which includes grid generator, main flow solver, turbulence module, turbulence and chemistry interaction module, chemistry module, spray module, radiation heat transfer module, data visualization module, and a post-processor for evaluating engine performance parameters. Each element may have contributions from several team members. Such a multi-source multi-element system needs to be integrated in a way that facilitates inter-module data communication, flexibility in module selection, and ease of integration.

Development of LM10-MIRA LOX/LNG expander cycle demonstrator engine

NASA Astrophysics Data System (ADS)

Rudnykh, Mikhail; Carapellese, Stefano; Liuzzi, Daniele; Arione, Luigi; Caggiano, Giuseppe; Bellomi, Paolo; D'Aversa, Emanuela; Pellegrini, Rocco; Lobov, S. D.; Gurtovoy, A. A.; Rachuk, V. S.

2016-09-01

This article contains results of joint works by Konstruktorskoe Buro Khimavtomatiki (KBKhA, Russia) and AVIO Company (Italy) on creation of the LM10-MIRA liquid-propellant rocket demonstrator engine for the third stage of the upgraded "Vega" launcher.Scientific and research activities conducted by KBKhA and AVIO in 2007-2014 in the frame of the LYRA Program, funded by the Italian Space Agency, with ELV as Prime contractor, and under dedicated ASI-Roscosmos inter-agencies agreement, were aimed at development and testing of a 7.5 t thrust expander cycle demonstrator engine propelled by oxygen and liquid natural gas (further referred to as LNG).

Reengineering through natural structures: the fractal factory

NASA Astrophysics Data System (ADS)

Sihn, Wilfried

1995-08-01

Many branches of European industry have had to recognize that their lead in the world market has been caught up with, particularly through Asian competition. In many cases a deficit of up to 30% in costs and productivity already exists. The reasons are rigid, Tayloristic company structures. The companies are not in a position to react flexibly to constantly changing environmental conditions. This article illustrates the methods of the `fractal company' which are necessary to solve the structure crisis. The fractal company distinguishes itself through its dynamics and its vitality, as well as its independent reaction to the changing circumstances. The developed methods, procedures, and framework conditions such as company structuring, human networking, hierarchy formation, and models for renumeration and working time are explained. They are based on practical examples from IPA's work with the automobile industry, their suppliers, and the engineering industry.

737/CFM56-7 Aircraft Engine Systems

NASA Technical Reports Server (NTRS)

Wright, Steve; Shiosaki, Justin

2006-01-01

The configuration of the propulsion system engine externals must meet many airplane requirements such as cost, thrust, weight, range and systems power extraction. On the 737-700 several program requirements also played a major role in the development of the engine externals. These program goals were increased range, same cost as a 1994 737-300, 15% reduction in maintenance costs from the 737-300, and a propulsion package that appeared as if it was designed by one company. This presentation will show how these requirements shaped the design of the engine externals for the 737-700/CFM56-7B.

Survey of manufacturers of high-performance heat engines adaptable to solar applications

NASA Technical Reports Server (NTRS)

Stine, W. B.

1984-01-01

The results of an industry survey made during the summer of 1983 are summarized. The survey was initiated in order to develop an information base on advanced engines that could be used in the solar thermal dish-electric program. Questionnaires inviting responses were sent to 39 companies known to manufacture or integrate externally heated engines. Follow-up telephone communication ensured uniformity of response. It appears from the survey that the technology exists to produce external-heat-addition engines of appropriate size with thermal efficiencies of over 40%. Problem areas are materials and sealing.

Contemporary issues in HIM. Software engineering--what does it mean to you?

PubMed

Wear, L L

1994-02-01

There have been significant advances in the way we develop software in the last two decades. Many companies are using the new process oriented approach to software development. Companies that use the new techniques and tools have reported improvements in both productivity and quality, but there are still companies developing software the way we did 30 years ago. If you saw the movie Jurassic Park, you saw the perfect way not to develop software. The programmer in the movie was the only person who knew the details of the system. No processes were followed, and there was no documentation. This was an absolutely perfect prescription for failure. Some of you are probably familiar with the term hacker which describes a person who spends hours sitting at a terminal hacking out code. Hackers have created some outstanding software products, but with today's complex systems, most companies are trying to get away from their dependence on hackers. They are instead turning to the process-oriented approach. When selecting software vendors, don't just look at the functionality of a product. Try to determine how the vendor develops software, and determine if you are dealing with hackers or a process-driven company. In the long run, you should get better, more reliable products from the latter.

Environmental Analysis

NASA Technical Reports Server (NTRS)

1980-01-01

Burns & McDonnell Engineering's environmental control study is assisted by NASA's Computer Software Management and Information Center's programs in environmental analyses. Company is engaged primarily in design of such facilities as electrical utilities, industrial plants, wastewater treatment systems, dams and reservoirs and aviation installations. Company also conducts environmental engineering analyses and advises clients as to the environmental considerations of a particular construction project. Company makes use of many COSMIC computer programs which have allowed substantial savings.

Development Status of Higher Education in Northern India: A Review Study

ERIC Educational Resources Information Center

Verma, Chaman

2017-01-01

In development of any country depends upon higher educational status. India is fast growing country in the field of education and technology. Most of IT engineers are deputed in world's most IT companies. It has been possible because of strong development higher education system in India. This paper focuses on the comparative study of higher…

Hurdles in tissue engineering/regenerative medicine product commercialization: a pilot survey of governmental funding agencies and the financial industry.

PubMed

Bertram, Timothy A; Tentoff, Edward; Johnson, Peter C; Tawil, Bill; Van Dyke, Mark; Hellman, Kiki B

2012-11-01

The Tissue Engineering and Regenerative Medicine International Society of the Americas (TERMIS-AM) Industry Committee conducted a semiquantitative opinion survey in 2010 to delineate potential hurdles to commercialization perceived by the TERMIS constituency groups that participate in the stream of technology commercialization (academia, start-up companies, development-stage companies, and established companies). A significant hurdle identified consistently by each group was access to capital for advancing potential technologies into development pathways leading to commercialization. A follow-on survey was developed by the TERMIS-AM Industry Committee to evaluate the financial industry's perspectives on investing in regenerative medical technologies. The survey, composed of 15 questions, was developed and provided to 37 investment organizations in one of three sectors (governmental, private, and public investors). The survey was anonymous and confidential with sector designation the only identifying feature of each respondent's organization. Approximately 80% of the survey was composed of respondents from the public (n=14) and private (n=15) sectors. Each respondent represents one investment organization with the potential of multiple participants participating to form the organization's response. The remaining organizations represented governmental agencies (n=8). Results from this survey indicate that a high percentage (<60%) of respondents (governmental, private, and public) were willing to invest >$2MM into regenerative medical companies at the different stages of a company's life cycle. Investors recognized major hurdles to this emerging industry, including regulatory pathway, clinical translation, and reimbursement of these new products. Investments in regenerative technologies have been cyclical over the past 10-15 years, but investors recognized a 1-5-year investment period before the exit via Merger and Acquisition (M&A). Investors considered musculoskeletal products and their top technology choice with companies in the clinical stage of development being the most preferred investment targets. All sectors indicated a limited interest in early-stage start-up companies potentially explaining why start-up companies have struggled to access to capital and investors based their investment on the stage of a company's life cycle, reflecting each sector's risk tolerance, exit strategy, time of holding an investment, and investment strategy priorities. Investors highlighted the limited number of regenerative medical companies that have achieved commercial status as a basis for why public investors have been approached by so few companies. Based on respondents to this survey, regenerative medical sponsors seeking capital from the financial industry must keep the explanation of their technology simple, since all sectors considered regenerative medical technology as difficult to evaluate. This survey's results indicate that under the current financial environment, many regenerative medical companies must consider codevelopment or even M&A as nondilutive means of raising capital. The overall summary for this survey highlights the highly varied goals and motivations for the various sectors of the government and financial industries.

26. Photographic copy of plant engineer's handdrawn buildings function chart, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

26. Photographic copy of plant engineer's hand-drawn buildings function chart, dated 1967; Ink and pencil on tracing paper; Attributed to GWN, Original in collection of Rath drawings and blueprints owned by Waterloo Community Development Board, Waterloo, Iowa; SHEET THREE; OUTLINES ACTIVITIES TAKING PLANE ON EACH FLOOR OF MAJOR BUILDINGS IN THE RATH COMPLEX - Rath Packing Company, Sycamore Street between Elm & Eighteenth Streets, Waterloo, Black Hawk County, IA

24. Photographic copy of plant engineer's handdrawn buildings function chart, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

24. Photographic copy of plant engineer's hand-drawn buildings function chart, dated 1967; Ink and pencil on tracing paper; Attributed to GWN, Original in collection of Rath drawings and blueprints owned by Waterloo Community Development Board, Waterloo, Iowa; SHEET ONE; OUTLINES ACTIVITIES TAKING PLANE ON EACH FLOOR OF MAJOR BUILDINGS IN THE RATH COMPLEX - Rath Packing Company, Sycamore Street between Elm & Eighteenth Streets, Waterloo, Black Hawk County, IA

25. Photographic copy of plant engineer's handdrawn buildings function chart, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

25. Photographic copy of plant engineer's hand-drawn buildings function chart, dated 1967; Ink and pencil on tracing paper; Attributed to GWN, Original in collection of Rath drawings and blueprints owned by Waterloo Community Development Board, Waterloo, Iowa; SHEET TWO; OUTLINES ACTIVITIES TAKING PLANE ON EACH FLOOR OF MAJOR BUILDINGS IN THE RATH COMPLEX - Rath Packing Company, Sycamore Street between Elm & Eighteenth Streets, Waterloo, Black Hawk County, IA

Task 6 -- Advanced turbine systems program conceptual design and product development

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-01-10

The Allison Engine Company has completed the Task 6 Conceptual Design and Analysis of Phase 2 of the Advanced Turbine System (ATS) contract. At the heart of Allison`s system is an advanced simple cycle gas turbine engine. This engine will incorporate components that ensure the program goals are met. Allison plans to commercialize the ATS demonstrator and market a family of engines incorporating this technology. This family of engines, ranging from 4.9 MW to 12 MW, will be suitable for use in all industrial engine applications, including electric power generation, mechanical drive, and marine propulsion. In the field of electricmore » power generation, the engines will be used for base load, standby, cogeneration, and distributed generation applications.« less

PILING PLAN OF SHIPBUILDING WAYS AND WHIRLEY CRANE SUPPORT. United ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PILING PLAN OF SHIPBUILDING WAYS AND WHIRLEY CRANE SUPPORT. United Engineering Company Ltd., Alameda Shipbuilding Plant. General plan and two sections. James J. Walsh, Consulting Engineer. Sheet no. 2. Scales 1 inch to 10 feet, and 1/4 inch to one foot. April 20, 1941, revised 5/7/41. blueprint - United Engineering Company Shipyard, Shipway Nos. 1 & 2, 2900 Main Street, Alameda, Alameda County, CA

Applying Best Practices to Military Commercial-Derivative Aircraft Engine Sustainment: Assessment of Using Parts Manufacturer Approval (PMA) Parts and Designated Engineering Representative (DER) Repairs

DTIC Science & Technology

2016-01-01

Company HPT high-pressure turbine LPT low-pressure turbine MARPA Modification and Replacement Parts Association MRO maintenance , repair, and overhaul...Corporation R® is a registered trademark. Cover image: A KC-10 F103 (CF6-50) engine at the MTU Vancouver facility (courtesy of MTU Maintenance Canada Ltd...representative (DER) repairs to decrease the cost of their aircraft engine maintenance . These parts and repairs are provided by third-party companies and

Industry to Education Technology Transfer Program. Composite Materials--Personnel Development. Final Report.

ERIC Educational Resources Information Center

Tomezsko, Edward S. J.

A composite materials education program was established to train Boeing Helicopter Company employees in the special processing of new filament-reinforced polymer composite materials. During the personnel development phase of the joint Boeing-Penn State University project, an engineering instructor from Penn State completed a 5-month, full-time…

Virtual aluminum castings: An industrial application of ICME

NASA Astrophysics Data System (ADS)

Allison, John; Li, Mei; Wolverton, C.; Su, Xuming

2006-11-01

The automotive product design and manufacturing community is continually besieged by Hercule an engineering, timing, and cost challenges. Nowhere is this more evident than in the development of designs and manufacturing processes for cast aluminum engine blocks and cylinder heads. Increasing engine performance requirements coupled with stringent weight and packaging constraints are pushing aluminum alloys to the limits of their capabilities. To provide high-quality blocks and heads at the lowest possible cost, manufacturing process engineers are required to find increasingly innovative ways to cast and heat treat components. Additionally, to remain competitive, products and manufacturing methods must be developed and implemented in record time. To bridge the gaps between program needs and engineering reality, the use of robust computational models in up-front analysis will take on an increasingly important role. This article describes just such a computational approach, the Virtual Aluminum Castings methodology, which was developed and implemented at Ford Motor Company and demonstrates the feasibility and benefits of integrated computational materials engineering.

System Engineering of Aerospace and Advanced Technology Programs at AN Astronautics Company

NASA Astrophysics Data System (ADS)

Kennedy, Mike O.

The purpose of this Record of Study is to document an internship with the Martin Marietta Astronautics Group in Denver, Colorado that was performed in partial fulfillment of the requirements for the Doctor of Engineering degree at Texas A&M University, and to demonstrate that the internship objectives have been met. The internship included assignments with two Martin Marietta companies, on three different programs and in four areas of engineering. The Record of Study takes a first-hand look at system engineering, SDI and advanced program management, and the way Martin Marietta conducts business. The five internship objectives were related to assignments in system modeling, system integration, engineering analysis and technical management. In support of the first objective, the effects of thermally and mechanically induced mirror surface distortions upon the wavefront intensity field of a high energy laser beam passing through the optical train of a space-based laser system were modeled. To satisfy the second objective, the restrictive as opposed to the broad interpretation of the 1972 ABM Treaty, and the capability of the Strategic Defense Initiative Zenith Star Program to comply with the Treaty were evaluated. For the third objective, the capability of Martin Marietta to develop an automated analysis system to integrate and analyze Superconducting Super Collider detector designs was investigated. For the fourth objective, the thermal models that were developed in support of the Small Intercontinental Ballistic Missile flight tests were described. And in response to the fifth objective, the technical management role of the Product Integrity Engineer assigned to the Zenith Star spacecraft's Beam Control and Transfer Subsystem was discussed. This Record of Study explores the relationships between the engineering, business, security and social concerns associated with the practice of engineering and the management of programs by a major defense contractor.

[Chapter 2. Transitions in drug-discovery technology and drug-development in Japan (1980-2010)].

PubMed

Sakakibara, Noriko; Yoshioka, Ryuzo; Matsumoto, Kazuo

2014-01-01

In 1970s, the material patent system was introduced in Japan. Since then, many Japanese pharmaceutical companies have endeavored to create original in-house products. From 1980s, many of the innovative products were small molecular drugs and were developed using powerful medicinal-chemical technologies. Among them were antibiotics and effective remedies for the digestive organs and circulatory organs. During this period, Japanese companies were able to launch some blockbuster drugs. At the same time, the pharmaceutical market, which had grown rapidly for two decades, was beginning to level off. From the late 1990s, drug development was slowing down due to the lack of expertise in biotechnology such as genetic engineering. In response to the circumstances, the research and development on biotechnology-based drugs such as antibody drugs have become more dynamic and popular at companies than small molecule drugs. In this paper, the writers reviewed in detail the transitions in drug discovery and development between 1980 and 2010.

FIRST FLOOR PLAN AND SCHEDULES. United Engineering Company Ltd., Alameda ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

FIRST FLOOR PLAN AND SCHEDULES. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities, Office Building. First floor plan, door transom schedule, interior finish schedule, sash schedule, exterior color schedule, and location plot plan. John Hudspeth, Architect, at foot of Main Street, Alameda, Calif. Sheet no. Al of 8 sheets, Plan no. 10,007. Scale 1/8 inch to the foot. March 18, 1942, last revised 9/25/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Office Building No. 137, 2900 Main Street, Alameda, Alameda County, CA

Damage-Tolerant, Affordable Composite Engine Cases Designed and Fabricated

NASA Technical Reports Server (NTRS)

Hopkins, Dale A.; Roberts, Gary D.; Pereira, J. Michael; Bowman, Cheryl L.

2005-01-01

An integrated team of NASA personnel, Government contractors, industry partners, and university staff have developed an innovative new technology for commercial fan cases that will substantially influence the safety and efficiency of future turbine engines. This effective team, under the direction of the NASA Glenn Research Center and with the support of the Federal Aviation Administration, has matured a new class of carbon/polymer composites and demonstrated a 30- to 50-percent improvement in specific containment capacity (blade fragment kinetic energy/containment system weight). As the heaviest engine component, the engine case/containment system greatly affects both the safety and efficiency of aircraft engines. The ballistic impact research team has developed unique test facilities and methods for screening numerous candidate material systems to replace the traditional heavy, metallic engine cases. This research has culminated in the selection of a polymer matrix composite reinforced with triaxially braided carbon fibers and technology demonstration through the fabrication of prototype engine cases for three major commercial engine manufacturing companies.

A case study on open innovation on Procter & Gamble. Part II: Co-creation and digital involvement

NASA Astrophysics Data System (ADS)

Agafitei, I. G.; Avasilcai, S.

2015-11-01

The first part of the present study case has pointed to the efforts directed by Procter & Gamble over time to keep close to its customers and the manner in which management has supported innovation within the company. Following the principles of disruptive innovation, the CEO of the company has set the goal for the company as to produce at least 50% of the innovations from external ideas. So, the aim of this paper is to continue to analyse the tools and the approach that P&G has taken in order to launch new products by partnering with other companies. Innovating by collaborating with external entities holding a highly specialized level of technology and engineering knowhow has been appreciated to contribute to the value creation process. In order to understand how open innovation strategy has worked for Procter & Gamble and which was the designated tool used to enrich the company with valuable input in order to develop products, we have taken a look at P&G's open innovation platform Connect + Develop.

View of hammer nameplate (Chambersburg Engineering Company, Chambersburg, Penna USA) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of hammer nameplate (Chambersburg Engineering Company, Chambersburg, Penna USA) and view north of Tony Talotta (heavy forger), Paul Azcharka (hammer operator), and Morty Hoffman (hammer operator helper) forging eyebolts. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structure Shop, League Island, Philadelphia, Philadelphia County, PA

Photos of Kathleen O'Brady

NASA Image and Video Library

2018-05-07

Kathleen O'Brady reviews documents in her office at NASA’s Kennedy Space Center in Florida. As a certification systems engineer in the Commercial Crew Program’s (CCP's) Systems Engineering and Integration Office, she is responsible for defining an integrated plan for certification which is being executed by the agency's CCP partners Boeing and SpaceX. The two companies are developing spacecraft to fly NASA astronauts to the International Space Station and return them safely home.

Partnerships Take a New Turn.

ERIC Educational Resources Information Center

Rich, Don

1983-01-01

Milwaukee Area Technical College has joined with business and industry to develop training programs for computer-based information processing, and engineering and manufacturing technologies. These partnerships are important as companies look for ways to improve productivity and quality, keep abreast of changing technology, and ensure economic…

Advanced Concept

NASA Image and Video Library

2003-12-01

This photo gives an overhead look at an RS-88 development rocket engine being test fired at NASA's Marshall Space Flight Center in Huntsville, Alabama, in support of the Pad Abort Demonstration (PAD) test flights for NASA's Orbital Space Plane (OSP). The tests could be instrumental in developing the first crew launch escape system in almost 30 years. Paving the way for a series of integrated PAD test flights, the engine tests support development of a system that could pull a crew safely away from danger during liftoff. A series of 16 hot fire tests of a 50,000-pound thrust RS-88 rocket engine were conducted, resulting in a total of 55 seconds of successful engine operation. The engine is being developed by the Rocketdyne Propulsion and Power unit of the Boeing Company. Integrated launch abort demonstration tests in 2005 will use four RS-88 engines to separate a test vehicle from a test platform, simulating pulling a crewed vehicle away from an aborted launch. Four 156-foot parachutes will deploy and carry the vehicle to landing. Lockheed Martin is building the vehicles for the PAD tests. Seven integrated tests are plarned for 2005 and 2006.

Advanced Concept

NASA Image and Video Library

2003-12-01

In this photo, an RS-88 development rocket engine is being test fired at NASA's Marshall Space Flight Center in Huntsville, Alabama, in support of the Pad Abort Demonstration (PAD) test flights for NASA's Orbital Space Plane (OSP). The tests could be instrumental in developing the first crew launch escape system in almost 30 years. Paving the way for a series of integrated PAD test flights, the engine tests support development of a system that could pull a crew safely away from danger during liftoff. A series of 16 hot fire tests of a 50,000-pound thrust RS-88 rocket engine were conducted, resulting in a total of 55 seconds of successful engine operation. The engine is being developed by the Rocketdyne Propulsion and Power unit of the Boeing Company. Integrated launch abort demonstration tests in 2005 will use four RS-88 engines to separate a test vehicle from a test platform, simulating pulling a crewed vehicle away from an aborted launch. Four 156-foot parachutes will deploy and carry the vehicle to landing. Lockheed Martin is building the vehicles for the PAD tests. Seven integrated tests are plarned for 2005 and 2006.

Engine Company Evaluation of Feasibility of Aircraft Retrofit Water-Injected Turbomachines

NASA Technical Reports Server (NTRS)

Becker, Arthur

2006-01-01

This study supports the NASA Glenn Research Center and the U.S. Air Force Research Laboratory in their efforts to evaluate the effect of water injection on aircraft engine performance and emissions. In this study, water is only injected during the takeoff and initial climb phase of a flight. There is no water injection during engine start or ground operations, nor during climb, cruise, descent, or landing. This study determined the maintenance benefit of water injection during takeoff and initial climb and evaluated the feasibility of retrofitting a current production engine, the PW4062 (Pratt & Whitney, East Hartford, CT), with a water injection system. Predicted NO(x) emissions based on a 1:1 water-tofuel ratio are likely to be reduced between 30 to 60 percent in Environmental Protection Agency parameter (EPAP). The maintenance cost benefit for an idealized combustor water injection system installed on a PW4062 engine in a Boeing 747-400ER aircraft (The Boeing Company, Chicago, IL) is computed to be $22 per engine flight hour (EFH). Adding water injection as a retrofit kit would cost up to $375,000 per engine because of the required modifications to the fuel system and addition of the water supply system. There would also be significant nonrecurring costs associated with the development and certification of the system that may drive the system price beyond affordability.

15 CFR 801.10 - Rules and regulations for the BE-120, Benchmark Survey of Transactions in Selected Services and...

Code of Federal Regulations, 2010 CFR

2010-01-01

...; educational and training services; engineering, architectural, and surveying services; financial services (purchases only, by companies or parts of companies that are not financial services providers); industrial engineering services; industrial-type maintenance, installation, alteration, and training services; legal...

15 CFR 801.10 - Rules and regulations for the BE-120, Benchmark Survey of Transactions in Selected Services and...

Code of Federal Regulations, 2011 CFR

2011-01-01

...; educational and training services; engineering, architectural, and surveying services; financial services (purchases only, by companies or parts of companies that are not financial services providers); industrial engineering services; industrial-type maintenance, installation, alteration, and training services; legal...

77 FR 24587 - Addition of Certain Persons to the Entity List; and Implementation of Entity List Annual Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-25

...; --Mahtab Technical Engineering Company; --Composite Propellant Missile Industry; and --Sanaye Sokhte... entity; 0 (i) By removing the ``Country'' column for South Korea, including the South Korean entity... Technical Engineering Company;. --Composite Propellant Missile Industry; and. --Sanaye Sokhte Morakab (SSM...

Compound cycle engine program

NASA Technical Reports Server (NTRS)

Bobula, G. A.; Wintucky, W. T.; Castor, J. G.

1987-01-01

The Compound Cycle Engine (CCE) is a highly turbocharged, power compounded power plant which combines the lightweight pressure rise capability of a gas turbine with the high efficiency of a diesel. When optimized for a rotorcraft, the CCE will reduce fuel burn for a typical 2 hr (plus 30 min reserve) mission by 30 to 40 percent when compared to a conventional advanced technology gas turbine. The CCE can provide a 50 percent increase in range-payload product on this mission. A program to establish the technology base for a Compound Cycle Engine is presented. The goal of this program is to research and develop those technologies which are barriers to demonstrating a multicylinder diesel core in the early 1990's. The major activity underway is a three-phased contract with the Garrett Turbine Engine Company to perform: (1) a light helicopter feasibility study, (2) component technology development, and (3) lubricant and material research and development. Other related activities are also presented.

Compound cycle engine program

NASA Technical Reports Server (NTRS)

Bobula, G. A.; Wintucky, W. T.; Castor, J. G.

1986-01-01

The Compound Cycle Engine (CCE) is a highly turbocharged, power compounded power plant which combines the lightweight pressure rise capability of a gas turbine with the high efficiency of a diesel. When optimized for a rotorcraft, the CCE will reduce fuel burned for a typical 2 hr (plus 30 min reserve) mission by 30 to 40 percent when compared to a conventional advanced technology gas turbine. The CCE can provide a 50 percent increase in range-payload product on this mission. A program to establish the technology base for a Compound Cycle Engine is presented. The goal of this program is to research and develop those technologies which are barriers to demonstrating a multicylinder diesel core in the early 1990's. The major activity underway is a three-phased contract with the Garrett Turbine Engine Company to perform: (1) a light helicopter feasibility study, (2) component technology development, and (3) lubricant and material research and development. Other related activities are also presented.

Commerical Crew Program - SpaceX

NASA Image and Video Library

2014-05-21

A SpaceX SuperDraco engine is hot-fired at the company's test facility in McGregor, Texas. SpaceX is developing its Crew Dragon spacecraft and Falcon 9 rocket in partnership with NASA’s Commercial Crew Program to carry astronauts to and from the International Space Station.

A safety management system for an offshore Azerbaijan Caspian Sea Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brasic, M.F.; Barber, S.W.; Hill, A.S.

1996-11-01

This presentation will describe the Safety Management System that Azerbaijan International Operating Company (AIOC) has structured to assure that Company activities are performed in a manner that protects the public, the environment, contractors and AIOC employees. The Azerbaijan International Oil Company is a consortium of oil companies that includes Socar, the state oil company of Azerbaijan, a number of major westem oil companies, and companies from Russia, Turkey and Saudi Arabia. The Consortium was formed to develop and produce a group of large oil fields in the Caspian Sea. The Management of AIOC, in starting a new operation in Azerbaijan,more » recognized the need for a formal HSE management system to ensure that their HSE objectives for AIOC activities were met. As a consortium of different partners working together in a unique operation, no individual partner company HSE Management system was appropriate. Accordingly AIOC has utilized the E & P Forum {open_quotes}Guidelines for the Development and Application of Health Safety and Environmental Management Systems{close_quotes} as the framework document for the development of the new AIOC system. Consistent with this guideline, AIOC has developed 19 specific HSE Management System Expectations for implementing its HSE policy and objectives. The objective is to establish and continue to maintain operational integrity in all AIOC activities and site operations. An important feature is the use of structured Safety Cases for the design engineering activity. The basis for the Safety Cases is API RP 75 and 14 J for offshore facilities and API RP 750 for onshore facilities both complimented by {open_quotes}Best International Oilfield Practice{close_quotes}. When viewed overall, this approach provides a fully integrated system of HSE management from design into operation.« less

Structural Engineering Managers - Innovation Challenges for their Skills

NASA Astrophysics Data System (ADS)

Linkeschová, D.; Tichá, A.

2015-11-01

The profession of a structural engineer is highly responsible, because the consequences of a structural engineer's errors result not only in economic damage to the property and often irreversible damage to the environment, they can also lead to direct loss of lives. In the current turbulent, dynamically developing society the managerial methods of structural engineers should not stagnate at the level of the last century applications. This paper deals with the challenges which the ongoing century poses to structural engineers and managers. It compares the results of research regarding the current state of managerial skills of structural engineers in Czech building companies to the defined skills of the 21st century's managers according to the global research programme ITL Research and according to the Vision for the Future of Structural Engineering, drawn up by Structural Engineering Institute - SEI ASCE.

Bringing a military approach to teaching.

PubMed

Baillie, Jonathan

2015-03-01

Despite having only established the company nine years ago, the founders of Kidderminster-based Avensys Medical believe the company now offers not only one of the UK's most comprehensive maintenance, repair, consultancy, and equipment audit services for medical and dental equipment, but also one of the most tailored training portfolios for electro-biomedical (EBME) engineers working in healthcare settings to enable them to get the best out of such equipment, improve patient safety, optimise service life, and save both the NHS and private sector money. As HEJ editor, Jonathan Baillie, discovered on meeting one of the two co-founders, ex-Royal Electrical and Mechanical Engineers (REME) artificer sergeant-major (ASM) and MoD engineering trainer, Robert Strange, many of the company's key trainers have a strong military background, and it is the rigorous and disciplined approach this enables them to bring to their training that he believes singles the company out.

The History of the Internet Search Engine: Navigational Media and the Traffic Commodity

NASA Astrophysics Data System (ADS)

van Couvering, E.

This chapter traces the economic development of the search engine industry over time, beginning with the earliest Web search engines and ending with the domination of the market by Google, Yahoo! and MSN. Specifically, it focuses on the ways in which search engines are similar to and different from traditional media institutions, and how the relations between traditional and Internet media have changed over time. In addition to its historical overview, a core contribution of this chapter is the analysis of the industry using a media value chain based on audiences rather than on content, and the development of traffic as the core unit of exchange. It shows that traditional media companies failed when they attempted to create vertically integrated portals in the late 1990s, based on the idea of controlling Internet content, while search engines succeeded in creating huge "virtually integrated" networks based on control of Internet traffic rather than Internet content.

A New Concept for a Business Ethics Program and the Development of a Monitoring Method for the Engineering Ethics Environment of a Corporation

NASA Astrophysics Data System (ADS)

Okita, Yuji; Hayase, Kenichi; Oba, Kyoko; Fudano, Jun

For most modern corporations, engineering is an essential element. While the public increasingly demands social responsibility in business activities, the importance of the interweaving relationship between business ethics and engineering ethics has been recognized. In this paper, firstly the change in the business environment is overviewed. Then, a new concept for designing and implementing a business ethics program, named the EAB (Ethics Across the Business) approach, is proposed. The EAB approach is highly adaptable for engineering-oriented corporations in their business ethics program activities because it derives from a process approach which has been much used by many companies to perform such activities as quality assurance and environment management. Finally, a newly developed method to monitor employee consciousness in terms of engineering ethics is introduced together with trial results.

Space Technology for Medical Aids

NASA Technical Reports Server (NTRS)

1982-01-01

Under one of the earliest contracts awarded in the Apollo lunar landing program, Parker Hannifin Corporation developed and produced equipment for controlling the flow of propellants into the mammoth engines of the Saturn moonbooster. Today, Parker is supplying the huge valves that control propellant flow from the Space Shuttle's external fuel tank to the engines of the Shuttle Orbiter as well as the "peanut valve," named for its small size. In 1977, NASA, recognizing the company's special expertise in miniature systems, asked Parker to participate in the development of an implantable artificial sphincter for control of urinary incontinence. The company's peanut valve experience provided an ideal base for a new biomedical project, the Programmable Implantable Medication System (PIMS) for continuous, computer-directed delivery of precisely metered medication -- insulin, for example -- within a patient's body. The work on PIMS also inspired development of Micromed, a related programmable medication device for external, rather than implantable use. The Biomedical Products Division has also applied its fluid handling expertise to a drugless therapy system called Cryomax for the treatment of such disorders as rheumatoid arthritis and lupus.

Advanced Environmental Barrier Coatings Development for Si-Based Ceramics

NASA Technical Reports Server (NTRS)

Zhu, Dong-Ming; Choi, R. Sung; Robinson, Raymond C.; Lee, Kang N.; Bhatt, Ramakrishna T.; Miller, Robert A.

2005-01-01

Advanced environmental barrier coating concepts based on multi-component HfO2 (ZrO2) and modified mullite systems are developed for monolithic Si3N4 and SiC/SiC ceramic matrix composite (CMC) applications. Comprehensive testing approaches were established using the water vapor cyclic furnace, high pressure burner rig and laser heat flux steam rig to evaluate the coating water vapor stability, cyclic durability, radiation and erosion resistance under simulated engine environments. Test results demonstrated the feasibility and durability of the environmental barrier coating systems for 2700 to 3000 F monolithic Si3N4 and SiC/SiC CMC component applications. The high-temperature-capable environmental barrier coating systems are being further developed and optimized in collaboration with engine companies for advanced turbine engine applications.

System Engineering for J-2X Development: The Simpler, the Better

NASA Technical Reports Server (NTRS)

Kelly, William M.; Greasley, Paul; Greene, William D.; Ackerman, Peter

2008-01-01

The Ares I and Ares V Vehicles will utilize the J-2X rocket engine developed for NASA by the Pratt and Whitney Rocketdyne Company (PWR) as the upper stage engine (USE). The J-2X is an improved higher power version of the original J-2 engine used for Apollo. System Engineering (SE) facilitates direct and open discussions of issues and problems. This simple idea is often overlooked in large, complex engineering development programs. Definition and distribution of requirements from the engine level to the component level is controlled by Allocation Reports which breaks down numerical design objectives (weight, reliability, etc.) into quanta goals for each component area. Linked databases of design and verification requirements help eliminate redundancy and potential mistakes inherent in separated systems. Another tool, the Architecture Design Description (ADD), is used to control J-2X system architecture and effectively communicate configuration changes to those involved in the design process. But the proof of an effective process is in successful program accomplishment. SE is the methodology being used to meet the challenge of completing J-2X engine certification 2 years ahead of any engine program ever developed at PWR. This paper describes the simple, better SE tools and techniques used to achieve this success.

Identification of the actual state and entity availability forecasting in power engineering using neural-network technologies

NASA Astrophysics Data System (ADS)

Protalinsky, O. M.; Shcherbatov, I. A.; Stepanov, P. V.

2017-11-01

A growing number of severe accidents in RF call for the need to develop a system that could prevent emergency situations. In a number of cases accident rate is stipulated by careless inspections and neglects in developing repair programs. Across the country rates of accidents are growing because of a so-called “human factor”. In this regard, there has become urgent the problem of identification of the actual state of technological facilities in power engineering using data on engineering processes running and applying artificial intelligence methods. The present work comprises four model states of manufacturing equipment of engineering companies: defect, failure, preliminary situation, accident. Defect evaluation is carried out using both data from SCADA and ASEPCR and qualitative information (verbal assessments of experts in subject matter, photo- and video materials of surveys processed using pattern recognition methods in order to satisfy the requirements). Early identification of defects makes possible to predict the failure of manufacturing equipment using mathematical techniques of artificial neural network. In its turn, this helps to calculate predicted characteristics of reliability of engineering facilities using methods of reliability theory. Calculation of the given parameters provides the real-time estimation of remaining service life of manufacturing equipment for the whole operation period. The neural networks model allows evaluating possibility of failure of a piece of equipment consistent with types of actual defects and their previous reasons. The article presents the grounds for a choice of training and testing samples for the developed neural network, evaluates the adequacy of the neural networks model, and shows how the model can be used to forecast equipment failure. There have been carried out simulating experiments using a computer and retrospective samples of actual values for power engineering companies. The efficiency of the developed model for different types of manufacturing equipment has been proved. There have been offered other research areas in terms of the presented subject matter.

40 CFR 1051.645 - What special provisions apply to branded engines?

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Compliance... identify the name and trademark of another company instead of your own on your emission control information label, as provided by § 1051.135(c)(2): (a) You must have a contractual agreement with the other company...

40 CFR 1051.645 - What special provisions apply to branded engines?

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Compliance... identify the name and trademark of another company instead of your own on your emission control information label, as provided by § 1051.135(c)(2): (a) You must have a contractual agreement with the other company...

40 CFR 1051.645 - What special provisions apply to branded engines?

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Compliance... identify the name and trademark of another company instead of your own on your emission control information label, as provided by § 1051.135(c)(2): (a) You must have a contractual agreement with the other company...

40 CFR 1051.645 - What special provisions apply to branded engines?

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Compliance... identify the name and trademark of another company instead of your own on your emission control information label, as provided by § 1051.135(c)(2): (a) You must have a contractual agreement with the other company...

Acting Diverse: Target Group Orientation as Key Competence in Engineering Education

ERIC Educational Resources Information Center

Ihsen, S.; Buschmeyer, A.

2007-01-01

International companies are recognised by equity between men and women as well as between other different groups (Diversity) as an economic factor and incorporate it into their company visions. Mixed teams are set up to design target group-oriented products, for example in automotive engineering. Therefore they need employees who represent the…

Development and Evaluation of the Stingray, an Amphibious Maritime Interdiction Operations Unmanned Ground Vehicle

DTIC Science & Technology

2014-05-01

of Ships], Charles Griffin and Company, London, 246-261 (1908). [6] Volpich, H. & Bridge, I . C., “Paddle Wheels Pt 1: Preliminary Model Experiments...Transactions of the Institution of Engineers and Shipbuilders in Scotland, 327-380 (1955). [7] Volpich, H. & Bridge, I . C., “Paddle Wheels...Bridge, I . C., “Paddle Wheels Pt III: Ship/Model Correlation,” Transactions of the Institution of Engineers and Shipbuilders in Scotland, 512-550

Propulsion Controls Modeling for a Small Turbofan Engine

NASA Technical Reports Server (NTRS)

Connolly, Joseph W.; Csank, Jeffrey T.; Chicatelli, Amy; Franco, Kevin

2017-01-01

A nonlinear dynamic model and propulsion controller are developed for a small-scale turbofan engine. The small-scale turbofan engine is based on the Price Induction company's DGEN 380, one of the few turbofan engines targeted for the personal light jet category. Comparisons of the nonlinear dynamic turbofan engine model to actual DGEN 380 engine test data and a Price Induction simulation are provided. During engine transients, the nonlinear model typically agrees within 10 percent error, even though the nonlinear model was developed from limited available engine data. A gain scheduled proportional integral low speed shaft controller with limiter safety logic is created to replicate the baseline DGEN 380 controller. The new controller provides desired gain and phase margins and is verified to meet Federal Aviation Administration transient propulsion system requirements. In understanding benefits, there is a need to move beyond simulation for the demonstration of advanced control architectures and technologies by using real-time systems and hardware. The small-scale DGEN 380 provides a cost effective means to accomplish advanced controls testing on a relevant turbofan engine platform.

GPR applications in civil engineering collaborating with a Company and preparation of material for the educational package to teach in Universities. STSM, COST Action TU1208

NASA Astrophysics Data System (ADS)

Sossa, Viviana; Assunção, Sonia; Pérez, Vega

2017-04-01

The STSM, Short-Term Missions, was carried out with the support of Murphy Survey company from Dublin - Ireland, was proposed for to Develop a module "GPR Applications in Archaeology" of the educational pack defined in the different meetings of the Cost Action TU 1208. The employ of GPR is mainly determined by the limits and uncertainties associated to this technique that affects to the measurements and the results. Private companies and end-users are highly interested in known the limits associated to particular cases and the advantages of the methodology compared to other studies. During this STSM, we plan to prepare a field survey, analyzing the possible problems and defining the objectives, and to acquire data to assess the structure. This data will be analyzed and processed in order to determine the limits of the technique in the particular case. The results will be compared to other surveys, in order to determine some clear restrictions that the company need to take into account in further works. Aknowledgments: This work has been partially funded by the EU COST Action TU1208, "Civil Engineering Applications of Ground Penetrating Radar", and it is a contribution to the working group 2.2 tasks in the COST Action TU1208.

75 FR 61817 - Adrian & Blissfield Rail Road Company-Continuance in Control Exemption-Jackson & Lansing Railroad...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-06

... Southern Railroad Company; the Detroit Connecting Railroad Company; and the Lapeer Industrial Railroad... segments of the Lansing Industrial Track; and Docket No. FD 35418, Jackson & Lansing Railroad Company... historical rounding error in NSR's engineering maps. This transaction may not be consummated until October 20...

Wind Power Career Chat

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2011-01-01

This document will teach students about careers in the wind energy industry. Wind energy, both land-based and offshore, is expected to provide thousands of new jobs in the next several decades. Wind energy companies are growing rapidly to meet America's demand for clean, renewable, and domestic energy. These companies need skilled professionals. Wind power careers will require educated people from a variety of areas. Trained and qualified workers manufacture, construct, operate, and manage wind energy facilities. The nation will also need skilled researchers, scientists, and engineers to plan and develop the next generation of wind energy technologies.

77 FR 26768 - Food and Drug Administration/International Society for Pharmaceutical Engineering Cosponsorship...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-07

... year, FDA speakers provide updates on current efforts affecting the development of global regulatory strategies, while industry professionals from some of today's leading pharmaceutical companies present case... hear directly from FDA experts and representatives of global regulatory authorities on best practices...

22. Photocopy of original drawing by Office of the Post ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. Photocopy of original drawing by Office of the Post Engineer, New York Port of Embarkation, 1984 (original in possession of NYC Economic Development Corp.) STANDPIPE SYSTEM PROPOSAL/NEW YORK RAILWAY COMPANY-PIER 4 - Brooklyn Army Supply Base, Pier 4, Brooklyn, Kings County, NY

Photocopy from Evan Leigh's Modern Cotton Spinning (Vol 1), Manchester, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy from Evan Leigh's Modern Cotton Spinning (Vol 1), Manchester, 1873 (PL XX); illustration used by eminent British textile engineer to exemplify the ultimate development in American cotton mill technology. - Harmony Manufacturing Company, Mill Number 3, 100 North Mohawk Street, Cohoes, Albany County, NY

Commerical Crew Program - SpaceX

NASA Image and Video Library

2018-01-02

A SpaceX Merlin engine is on a test stand at the company's facility in McGregor, Texas. SpaceX is developing its Crew Dragon spacecraft and Falcon 9 rocket in partnership with NASA’s Commercial Crew Program to carry astronauts to and from the International Space Station.

2. EXTERIOR OF ENGINE ROOM, CONTAINING MESTACORLISS CROSSCOMPOUND ENGINE, FOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. EXTERIOR OF ENGINE ROOM, CONTAINING MESTA-CORLISS CROSS-COMPOUND ENGINE, FOR 40" BLOOMING MILL - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

1. EXTERIOR OF ENGINE ROOM, CONTAINING UNITEDTOD TWINTANDEM ENGINE, FOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. EXTERIOR OF ENGINE ROOM, CONTAINING UNITED-TOD TWIN-TANDEM ENGINE, FOR 40" BLOOMING MILL - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

Future development programs. [for emission reduction and production of aircraft engines

NASA Technical Reports Server (NTRS)

Waters, L.

1976-01-01

A company program was planned which has a main drive to develop those emission reduction concepts that have the promise of earliest success. These programs were proposed in an attempt to enhance existing engine systems, exploiting their potential for emission reduction as far as is compatible with retaining the well established features in them that are well understood and in current production. The intended programs identified in the area of new concepts were: (1) upgrading the TCM fuel system, (2) evaluation of accelerator pump, (3) reduced cooling requirement, and (4) variable spark timing.

Advanced Gasoline Turbocharged Direction Injection (GTDI) Engine Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, Terrance

This program was undertaken in response to US Department of Energy Solicitation DE-FOA-0000079, resulting in a cooperative agreement with Ford and MTU to demonstrate improvement of fuel efficiency in a vehicle equipped with an advanced GTDI engine. Ford Motor Company has invested significantly in GTDI engine technology as a cost effective, high volume, fuel economy solution, marketed globally as EcoBoost technology. Ford envisions additional fuel economy improvement in the medium and long term by further advancing EcoBoost technology. The approach for the project was to engineer a comprehensive suite of gasoline engine systems technologies to achieve the project objectives, andmore » to progressively demonstrate the objectives via concept analysis / computer modeling, single-cylinder and multi-cylinder engine testing on engine dynamometer, and vehicle level testing on chassis rolls.« less

Credibility engineering in the food industry: linking science, regulation, and marketing in a corporate context.

PubMed

Penders, Bart; Nelis, Annemiek P

2011-12-01

We expand upon the notion of the "credibility cycle" through a study of credibility engineering by the food industry. Research and development (R&D) as well as marketing contribute to the credibility of the food company Unilever and its claims. Innovation encompasses the development, marketing, and sales of products. These are directed towards three distinct audiences: scientific peers, regulators, and consumers. R&D uses scientific articles to create credit for itself amongst peers and regulators. These articles are used to support health claims on products. However, R&D, regulation, and marketing are not separate realms. A single strategy of credibility engineering connects health claims to a specific public through linking that public to a health issue and a food product.

Advanced High-Temperature Engine Materials Technology Progresses

NASA Technical Reports Server (NTRS)

1995-01-01

The objective of the Advanced High Temperature Engine Materials Technology Program (HITEMP) is to generate technology for advanced materials and structural analysis that will increase fuel economy, improve reliability, extend life, and reduce operating costs for 21st century civil propulsion systems. The primary focus is on fan and compressor materials (polymer-matrix composites--PMC's), compressor and turbine materials (superalloys, and metal-matrix and intermetallic-matrix composites--MMC's and IMC's) and turbine materials (ceramic-matrix composites--CMC's). These advanced materials are being developed by in-house researchers and on grants and contracts. NASA considers this program to be a focused materials and structures research effort that builds on our base research programs and supports component-development projects. HITEMP is coordinated with the Advanced Subsonic Technology (AST) Program and the Department of Defense/NASA Integrated High-Performance Turbine Engine Technology (IHPTET) Program. Advanced materials and structures technologies from HITEMP may be used in these future applications. Recent technical accomplishments have not only improved the state-of-the-art but have wideranging applications to industry. A high-temperature thin-film strain gage was developed to measure both dynamic and static strain up to 1100 C (2000 F). The gage's unique feature is that it is minimally intrusive. This technology, which received a 1995 R&D 100 Award, has been transferred to AlliedSignal Engines, General Electric Company, and Ford Motor Company. Analytical models developed at the NASA Lewis Research Center were used to study Textron Specialty Materials' manufacturing process for titanium-matrix composite rings. Implementation of our recommendations on tooling and processing conditions resulted in the production of defect free rings. In the Lincoln Composites/AlliedSignal/Lewis cooperative program, a composite compressor case is being manufactured with a Lewis-developed matrix, VCAP. The compressor case, which will reduce weight by 30 percent and costs by 50 percent, is scheduled to be engine tested in the near future.

A Product Analysis Method and Its Staging to Develop Redesign Competences

ERIC Educational Resources Information Center

Hansen, Claus Thorp; Lenau, Torben Anker

2013-01-01

Most product development work in industrial practice is incremental, i.e., the company has had a product in production and on the market for some time, and now time has come to design an upgraded variant. This type of redesign project requires that the engineering designers have competences to carry through an analysis of the existing product…

Seafood Packaging

NASA Technical Reports Server (NTRS)

1996-01-01

NASA's Technology Transfer Office at Stennis Space Center worked with a New Orleans seafood packaging company to develop a container to improve the shipping longevity of seafood, primarily frozen and fresh fish, while preserving the taste. A NASA engineer developed metalized heat resistant polybags with thermal foam liners using an enhanced version of the metalized mylar commonly known as 'space blanket material,' which was produced during the Apollo era.

Strategies for the Cooperation of Educational Institutions and Companies in Mechanical Engineering

ERIC Educational Resources Information Center

Kettunen, Juha

2006-01-01

Purpose: The purpose of this study is to analyse the strategic planning of the Centre for Mechanical Engineering, which is a joint venture of educational institutions and companies in Southwest Finland. Design/methodology/approach: The paper presents the strategies of focus and cost efficiency and how the selected strategies can be adjusted…

Industry involvement in IPAD through the Industry Technical Advisory Board

NASA Technical Reports Server (NTRS)

Swanson, W. E.

1980-01-01

In 1976 NASA awarded The Boeing Company a contract to develop IPAD (Integrated Programs for Aerospace-Vehicle Design). This contract included a requirement for Boeing to form an Industrial Technical Advisory Board (ITAB), with members representing major aerospace and computer companies. The purpose of this board was to guide the development of IPAD. The specific goal of IPAD is to increase United States aerospace industry productivity through the application of computers to manage engineering data. This goal clearly is attainable; in fact, IPAD's influence can reach beyond the aerospace industry to many businesses where product development is based on the design-building process. An enhanced IPAD, therefore, is a national asset of significance. The role of ITAB in guiding the development of this system is described.

Corporate ergonomics programme at Ford Motor Company.

PubMed

Joseph, Bradley S

2003-01-01

The use of ergonomic principles in automobile assembly and manufacturing operations has become an important part of a comprehensive health and safety process as well as an integral part of the engineering systems. Ford Motor Company has developed an ergonomics process to manage issues related to injury and illness (e.g., musculoskeletal diseases) and to ensure the appropriate use of human resources on the plant floor. The ergonomics programme uses joint labour and management teams to identify and evaluate jobs and develop and implement solutions. This paper summarises the efforts of the Ford Motor Company in implementing and maintaining the programme. Key strategies are outlined that provide important links to internal organisational units that are critical to fully utilise the ergonomics process. In addition, the paper outlines differences between proactive and reactive efforts and shows the importance of using the information generated by the initiatives for process improvement.

Developing a virtual engineering management community

NASA Astrophysics Data System (ADS)

Hewitt, Bill; Kidd, Moray; Smith, Robin; Wearne, Stephen

2016-03-01

The paper reviews the lessons of planning and running an Engineering Management practitioner development programme in a partnership between BP and the University of Manchester. This distance-learning programme is for professional engineers in mid-career experienced in the engineering and support activities for delivering safe, compliant and reliable projects and operations worldwide. The programme concentrates on the why and how of leadership and judgement in managing the engineering of large and small projects and operational support. Two intensive residential weeks are combined with a virtual learning environment over one year. Assessed assignments between and after the residential weeks provide opportunities for individual reflective learning for each delegate through applying concepts and the lessons of case studies to their experience, current challenges and expected responsibilities. This successful partnership between a major global company and a university rich in research and teaching required a significant dedication of intellectual and leadership effort by all concerned. The rewards for both parties and most importantly for the engineers themselves are extensive.

Engineer Company Force Structure Force Modularization in Support of Decisive Action. Does the Corps of Engineers Need to Re-Structure Engineer Construction Companies Again in order to Support Decisive Actions?

DTIC Science & Technology

2012-05-16

Regional Command RCP Route Clearance Platoon RSOI Reception, Staging, Onward Movement, Integration SBCT Stryker Brigade Combat Team TOE Table of...Point (ASPs), and field hospital platforms; prepare river crossing sites; and support port repair due to Hydraulic Excavator (HYEX), provides force...platforms, FARPS, supply routes, roads, control points, fire bases, tank ditches, ASPs, and field hospital platforms; prepare river crossing sites; and

8. SHEET 2, CONTROL HOUSE FOR DRY DOCK. United Engineering ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. SHEET 2, CONTROL HOUSE FOR DRY DOCK. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities, Office Building. John Hudspeth, Architect, at foot of Main Street, Alameda, Calif. Sheet no. 2 of 2 sheets, Plan no. 10,507. Various scales. January 4, 1943, last revised 1/19/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Control House for Dry Dock, 2900 Main Street, Alameda, Alameda County, CA

Sustainability Assessment Model in Product Development

NASA Astrophysics Data System (ADS)

Turan, Faiz Mohd; Johan, Kartina; Nor, Nik Hisyamudin Muhd; Omar, Badrul

2017-08-01

Faster and more efficient development of innovative and sustainable products has become the focus for manufacturing companies in order to remain competitive in today’s technologically driven world. Design concept evaluation which is the end of conceptual design is one of the most critical decision points. It relates to the final success of product development, because poor criteria assessment in design concept evaluation can rarely compensated at the later stages. Furthermore, consumers, investors, shareholders and even competitors are basing their decisions on what to buy or invest in, from whom, and also on what company report, and sustainability is one of a critical component. In this research, a new methodology of sustainability assessment in product development for Malaysian industry has been developed using integration of green project management, new scale of “Weighting criteria” and Rough-Grey Analysis. This method will help design engineers to improve the effectiveness and objectivity of the sustainable design concept evaluation, enable them to make better-informed decisions before finalising their choice and consequently create value to the company or industry. The new framework is expected to provide an alternative to existing methods.

The Application of Concurrent Engineering Tools and Design Structure Matrix in Designing Tire

NASA Astrophysics Data System (ADS)

Ginting, Rosnani; Fachrozi Fitra Ramadhan, T.

2016-02-01

The development of automobile industry in Indonesia is growing rapidly. This phenomenon causes companies related to the automobile industry such as tire industry must develop products based on customers’ needs and considering the timeliness of delivering the product to the customer. It could be reached by applying strategic planning in developing an integrated concept of product development. This research was held in PT. XYZ that applied the sequential approach in designing and developing products. The need to improve in one stage of product development could occur re-designing that needs longer time in developing a new product. This research is intended to get an integrated product design concept of tire pertaining to the customer's needs using Concurrent Engineering Tools by implementing the two-phased of product development. The implementation of Concurrent Engineering approach results in applying the stage of project planning, conceptual design, and product modules. The product modules consist of four modules that using Product Architecture - Design Structure Matrix to ease the designing process of new product development.

Crowne Plaza Renovation Retrofit Case Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

InterContinental Hotels Group (IHG) and its franchise partner B.F. Saul Company Hospitality Group (B.F. Saul Co.) partnered with the Department of Energy (DOE) to develop and implement solutions to retrofit existing buildings to reduce energy consumption by at least 30% versus requirements set by Standard 90.1-2004 of the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE), the American National Standards Institute (ANSI), and the Illuminating Engineering Society of North America (IESNA) as part of DOE’s Commercial Building Partnerships (CBP) Program.

77 FR 43368 - Navistar Truck Development and Technology Center, a Subsidiary of Navistar International...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-24

..., Alpha Personnel, Inc., and PPP Careers, Inc., Fort Wayne, Indiana; Amended Certification Regarding... workers were engaged in engineering and technical consulting services. The company reports that workers leased from PPP Careers, Inc. were employed on-site at the 2911 Meyer Road, Fort Wayne, Indiana location...

Computer Simulations Hone Leadership Skills

ERIC Educational Resources Information Center

Olson, Lynn

2007-01-01

An $11 million executive-training course for principals, modeled after best practices used in the corporate, medical, engineering, and military worlds, is starting to gain traction among states. Developed by the National Institute for School Leadership, or NISL, a for-profit company based in Washington, the program is now used widely in…

78 FR 8108 - NextGen Solutions Vendors Guide

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-05

... Commerce is developing a web-based NextGen Solutions Vendors Guide intended to be used by foreign air... being listed on the Vendors Guide Web site should submit their company's name, Web site address, contact... to aviation system upgrades) Example: Engineering Services More information on the four ICAO ASBU...

Keeping Cool With Solar-Powered Refrigeration

NASA Technical Reports Server (NTRS)

2003-01-01

In the midst of developing battery-free, solar-powered refrigeration and air conditioning systems for habitats in space, David Bergeron, the team leader for NASA's Advanced Refrigerator Technology Team at Johnson Space Center, acknowledged the need for a comparable solar refrigerator that could operate in conjunction with the simple lighting systems already in place on Earth. Bergeron, a 20-year veteran in the aerospace industry, founded the company Solus Refrigeration, Inc., in 1999 to take the patented advanced refrigeration technology he co-developed with his teammate, Johnson engineer Michael Ewert, to commercial markets. Now known as SunDanzer Refrigeration, Inc., Bergeron's company is producing battery-free, photovoltaic (PV) refrigeration systems under license to NASA, and selling them globally.

Facility design, construction, and operation

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

France has been disposing of low-level radioactive waste (LLW) at the Centre de Stockage de la Manche (CSM) since 1969 and now at the Centre de Stockage de l`Aube (CSA) since 1992. In France, several agencies and companies are involved in the development and implementation of LLW technology. The Commissariat a l`Energie Atomic (CEA), is responsible for research and development of new technologies. The Agence National pour la Gestion des Dechets Radioactifs is the agency responsible for the construction and operation of disposal facilities and for wastes acceptance for these facilities. Compagnie Generale des Matieres Nucleaires provides fuel services, includingmore » uranium enrichment, fuel fabrication, and fuel reprocessing, and is thus one generator of LLW. Societe pour les Techniques Nouvelles is an engineering company responsible for commercializing CEA waste management technology and for engineering and design support for the facilities. Numatec, Inc. is a US company representing these French companies and agencies in the US. In Task 1.1 of Numatec`s contract with Martin Marietta Energy Systems, Numatec provides details on the design, construction and operation of the LLW disposal facilities at CSM and CSA. Lessons learned from operation of CSM and incorporated into the design, construction and operating procedures at CSA are identified and discussed. The process used by the French for identification, selection, and evaluation of disposal technologies is provided. Specifically, the decisionmaking process resulting in the change in disposal facility design for the CSA versus the CSM is discussed. This report provides` all of the basic information in these areas and reflects actual experience to date.« less

Building local research and development capacity for the prevention and cure of neglected diseases: the case of India.

PubMed

Kettler, H E; Modi, R

2001-01-01

This paper examines the proposal to build research and development (R&D) capabilities for dealing with neglected infectious and tropical diseases in countries where they are endemic, as a potentially cost- and time-effective way to fill the gap between the supply of and need for new medicines. With reference to the situation in India, we consider the competencies and incentives needed by companies so that their strategy can be shifted from reverse engineering of existing products to investment in R&D for new products. This requires complex reforms, of which the intellectual property rights agreement is only one. We also consider whether Indian companies capable of conducting research and development are likely to target neglected diseases. Patterns of patenting and of R&D, together with evidence from interviews we have conducted, suggest that Indian companies, like multinational corporations, are likely to target global diseases because of the prospect of much greater returns. Further studies are required on how Indian companies would respond to push and pull incentives originally designed to persuade multinational corporations to do more R&D on neglected diseases.

Building local research and development capacity for the prevention and cure of neglected diseases: the case of India.

PubMed Central

Kettler, H. E.; Modi, R.

2001-01-01

This paper examines the proposal to build research and development (R&D) capabilities for dealing with neglected infectious and tropical diseases in countries where they are endemic, as a potentially cost- and time-effective way to fill the gap between the supply of and need for new medicines. With reference to the situation in India, we consider the competencies and incentives needed by companies so that their strategy can be shifted from reverse engineering of existing products to investment in R&D for new products. This requires complex reforms, of which the intellectual property rights agreement is only one. We also consider whether Indian companies capable of conducting research and development are likely to target neglected diseases. Patterns of patenting and of R&D, together with evidence from interviews we have conducted, suggest that Indian companies, like multinational corporations, are likely to target global diseases because of the prospect of much greater returns. Further studies are required on how Indian companies would respond to push and pull incentives originally designed to persuade multinational corporations to do more R&D on neglected diseases. PMID:11545331

Innovative Model of Practice-Oriented Training of Employees of the Town-Forming Enterprise in the Mining Region (by the Example of JSC "SUEK-Kuzbass")

NASA Astrophysics Data System (ADS)

Kulay, Svetlana; Kayachev, Gennady

2017-11-01

The article proposes to improve the system of training of employees of joint-stock company SUEK-Kuzbass in the educational institutions of the Kemerovo region according to the requirements of the company using practice-oriented training technology. The aim of the work is to substantiate the effectiveness of implementing practice-oriented training, identify priority directions and ways of its development. The main objectives of the study are: to identify the main advantages for the company and students; determine the criteria for the success and practical value of applying practice-oriented training for the company; conduct a comparative analysis of the target and practice-oriented model of training for the company. The real needs of the employer through the dual form of training were taking into account. The expansion of positive experience in training engineering personnel in higher education in technology-based training with the involvement of specialists from other regions of the company and expanding training in mining was also included.

An Engineering Technology Skills Framework that Reflects Workforce Needs on Maui and the Big Island of Hawai'i

NASA Astrophysics Data System (ADS)

Seagroves, S.; Hunter, L.

2010-12-01

The Akamai Workforce Initiative (AWI) is an interdisciplinary effort to improve science/engineering education in the state of Hawai'i, and to train a diverse population of local students in the skills needed for a high-tech economy. In 2009, the AWI undertook a survey of industry partners on Maui and the Big Island of Hawai'i to develop an engineering technology skills framework that will guide curriculum development at the U. of Hawai'i - Maui (formerly Maui Community College). This engineering skills framework builds directly on past engineering-education developments within the Center for Adaptive Optics Professional Development Program, and draws on curriculum development frameworks and engineering skills standards from the literature. Coupling that previous work with reviews of past Akamai Internship projects and information from previous conversations with the local high-tech community led to a structured-interview format where engineers and managers could contribute meaningful commentary to this framework. By incorporating these local high-tech companies' needs for entry-level engineers and technicians, a skills framework emerges that is unique and illuminating. Two surprising features arise in this framework: (1) "technician-like" skills of making existing technology work are on similar footing with "engineer-like" skills of creating new technology; in fact, both engineers and technicians at these workplaces use both sets of skills; and (2) project management skills are emphasized by employers even for entry-level positions.

Use of Learning Miniprojects in a Chemistry Laboratory for Engineering

ERIC Educational Resources Information Center

Cancela, Angeles; Maceiras, Rocio; Sánchez, Angel; Izquierdo, Milagros; Urréjola, Santiago

2016-01-01

The aim of this paper is to describe the design of chemical engineering laboratory sessions in order to focus them on the learning company approach. This is an activity carried out in the classroom similar to the activities that exist in real companies. This could lead classroom practice to a more cooperative learning and a different style of…

Aircraft Geared Architecture Reduces Fuel Cost and Noise

NASA Technical Reports Server (NTRS)

2015-01-01

In an effort to increase fuel efficiency and reduce noise in commercial airplanes, NASA aeronautics teamed up with East Hartford, Connecticut-based Pratt & Whitney through a Space Act Agreement to help the company increase the efficiency of its turbofan engine. The company's new PurePower line of engines is 15 percent more fuel-efficient and up to 75 percent quieter than its competitors.

Continuous improvement of the quality reporting system of a medium-size company

NASA Astrophysics Data System (ADS)

Hawkins, Anthony; Onuh, Spencer

2001-10-01

Many companies are faced with quality improvement issues on a daily basis but their response to this problem varies. This paper discusses the improvement in the defect reporting system at a medium sized manufacturing company following the appointment of an experienced, motivated, design engineer to be dedicated to that task. It sets out the situation that the engineer inherited and details the changes that were incorporated; it assesses which were successful and which failed. Following a survey of current literature, it was seen that there is little written specifically on the subject of audited defect reporting. It is felt that this study goes some way to filling that void. A successful survey of engineering companies in Southern Hampshire reinforces the principle findings, that the emphasising of the Check part of Demming's Plan-Do-Check-Act cycle is a novel approach to the Quality Improvement Process, and that it has reduced the cost of rework by an audited 80% in a period of two years.

Advanced Gas Turbine (AGT) Technology Development Project, ceramic component developments

NASA Technical Reports Server (NTRS)

Teneyck, M. O.; Macbeth, J. W.; Sweeting, T. B.

1987-01-01

The ceramic component technology development activity conducted by Standard Oil Engineered Materials Company while performing as a principal subcontractor to the Garrett Auxiliary Power Division for the Advanced Gas Turbine (AGT) Technology Development Project (NASA Contract DEN3-167) is summarized. The report covers the period October 1979 through July 1987, and includes information concerning ceramic technology work categorized as common and unique. The former pertains to ceramic development applicable to two parallel AGT projects established by NASA contracts DEN3-168 (AGT100) and DEN3-167 (AGT101), whereas the unique work solely pertains to Garrett directed activity under the latter contract. The AGT101 Technology Development Project is sponsored by DOE and administered by NASA-Lewis. Standard Oil directed its efforts toward the development of ceramic materials in the silicon-carbide family. Various shape forming and fabrication methods, and nondestructive evaluation techniques were explored to produce the static structural components for the ceramic engine. This permitted engine testing to proceed without program slippage.

The Plant Genetic Engineering Laboratory For Desert Adaptation

NASA Astrophysics Data System (ADS)

Kemp, John D.; Phillips, Gregory C.

1985-11-01

The Plant Genetic Engineering Laboratory for Desert Adaptation (PGEL) is one of five Centers of Technical Excellence established as a part of the state of New Mexico's Rio Grande Research Corridor (RGRC). The scientific mission of PGEL is to bring innovative advances in plant biotechnology to bear on agricultural productivity in arid and semi-arid regions. Research activities focus on molecular and cellular genetics technology development in model systems, but also include stress physiology investigations and development of desert plant resources. PGEL interacts with the Los Alamos National Laboratory (LANL), a national laboratory participating in the RGRC. PGEL also has an economic development mission, which is being pursued through technology transfer activities to private companies and public agencies.

Use of the self-organizing feature map to diagnose abnormal engineering change

NASA Astrophysics Data System (ADS)

Lu, Ruei-Shan; Wu, Zhi-Ting; Peng, Kuo-Wei; Yu, Tai-Yi

2015-07-01

This study established identification manners with self-organizing feature map (SOM) to achieve the goal of monitoring Engineering Change (EC) based on historical data of a company that specializes in computers and peripherals. The product life cycle of this company is 3-6 months. The historical data were divided into three parts, each covering four months. The first part, comprising 2,343 records from January to April (the training period), comprise the Control Group. The second and third parts comprise Experimental Groups (EG) 1 and 2, respectively. For EG 1 and 2, the successful rate of recognizing information on abnormal ECs was approximately 96% and 95%, respectively. This paper shows the importance and screening procedures of abnormal engineering change for a particular company specializing in computers and peripherals.

Overview of the Integrated Programs for Aerospace Vehicle Design (IPAD) project

NASA Technical Reports Server (NTRS)

Venneri, S. L.

1983-01-01

To respond to national needs for improved productivity in engineering design and manufacturing, a NASA supported joint industry/government project is underway denoted Integrated Programs for Aerospace Vehicle Design (IPAD). The objective is to improve engineering productivity through better use of computer technology. It focuses on development of data base management technology and associated software for integrated company wide management of engineering and manufacturing information. Results to date on the IPAD project include an in depth documentation of a representative design process for a large engineering project, the definition and design of computer aided design software needed to support that process, and the release of prototype software to manage engineering information. This paper provides an overview of the IPAD project and summarizes progress to date and future plans.

"Think different": a qualitative assessment of commercial innovation for diabetes information technology programs.

PubMed

Rupcic, Sonia; Tamrat, Tigest; Kachnowski, Stan

2012-11-01

This study reviews the state of diabetes information technology (IT) initiatives and presents a set of recommendations for improvement based on interviews with commercial IT innovators. Semistructured interviews were conducted with 10 technology developers, representing 12 of the most successful IT companies in the world. Average interview time was approximately 45 min. Interviews were audio-recorded, transcribed, and entered into ATLAS.ti for qualitative data analysis. Themes were identified through a process of selective and open coding by three researchers. We identified two practices, common among successful IT companies, that have allowed them to avoid or surmount the challenges that confront healthcare professionals involved in diabetes IT development: (1) employing a diverse research team of software developers and engineers, statisticians, consumers, and business people and (2) conducting rigorous research and analytics on technology use and user preferences. Because of the nature of their respective fields, healthcare professionals and commercial innovators face different constraints. With these in mind we present three recommendations, informed by practices shared by successful commercial developers, for those involved in developing diabetes IT programming: (1) include software engineers on the implementation team throughout the intervention, (2) conduct more extensive baseline testing of users and monitor the usage data derived from the technology itself, and (3) pursue Institutional Review Board-exempt research.

Informational content of official pharmaceutical industry web sites about treatments for erectile dysfunction.

PubMed

Waack, Katherine E; Ernst, Michael E; Graber, Mark A

2004-12-01

In the last 5 years, several treatments have become available for erectile dysfunction (ED). During this same period, consumer use of the Internet for health information has increased rapidly. In traditional direct-to-consumer advertisements, viewers are often referred to a pharmaceutical company Web site for further information. To evaluate the accessibility and informational content of 5 pharmaceutical company Web sites about ED treatments. Using 10 popular search engines and 1 specialized search engine, the accessibility of the official pharmaceutical company-sponsored Web site was determined by searching under brand and generic names. One company also manufactures an ED device; this site was also included. A structured, explicit review of information found on these sites was conducted. Of 110 searches (1 for each treatment, including corresponding generic drug name, using each search engine), 68 yielded the official pharmaceutical company Web site within the first 10 links. Removal of outliers (for both brand and generic name searches) resulted in 68 of 77 searches producing the pharmaceutical company Web site for the brand-name drug in the top 10 links. Although all pharmaceutical company Web sites contained general information on adverse effects and contraindications to use, only 2 sites gave actual percentages. Three sites provided references for their materials or discussed other treatment or drug options, while 4 of the sites contained profound advertising or emotive content. None mentioned cost of the therapy. The information contained on pharmaceutical company Web sites for ED treatments is superficial and aimed primarily at consumers. It is largely promotional and provides only limited information needed to effectively compare treatment options.

An Ethical Study on the Uses of Enhancement Genetic Engineering

NASA Astrophysics Data System (ADS)

Kawakita, Koji

A variety of biomedical technologies are being developed that can be used for purposes other than treating diseases. Such “enhancement technologies” can be used to improve our own and future generation's life-chances. While these technologies can help people in many ways, their use raises important ethical issues. Some arguments for anti-enhancement as well as pro-enhancement seem to rest, however, on shaky foundation. Both company engineers and the general public had better learn more from technological, economical and philosophical histories. For such subjects may provide engineers with less opportunities of technological misuses and more powers of self-esteem in addition to self-control.

CASIS Fact Sheet: Hardware and Facilities

NASA Technical Reports Server (NTRS)

Solomon, Michael R.; Romero, Vergel

2016-01-01

Vencore is a proven information solutions, engineering, and analytics company that helps our customers solve their most complex challenges. For more than 40 years, we have designed, developed and delivered mission-critical solutions as our customers' trusted partner. The Engineering Services Contract, or ESC, provides engineering and design services to the NASA organizations engaged in development of new technologies at the Kennedy Space Center. Vencore is the ESC prime contractor, with teammates that include Stinger Ghaffarian Technologies, Sierra Lobo, Nelson Engineering, EASi, and Craig Technologies. The Vencore team designs and develops systems and equipment to be used for the processing of space launch vehicles, spacecraft, and payloads. We perform flight systems engineering for spaceflight hardware and software; develop technologies that serve NASA's mission requirements and operations needs for the future. Our Flight Payload Support (FPS) team at Kennedy Space Center (KSC) provides engineering, development, and certification services as well as payload integration and management services to NASA and commercial customers. Our main objective is to assist principal investigators (PIs) integrate their science experiments into payload hardware for research aboard the International Space Station (ISS), commercial spacecraft, suborbital vehicles, parabolic flight aircrafts, and ground-based studies. Vencore's FPS team is AS9100 certified and a recognized implementation partner for the Center for Advancement of Science in Space (CASIS

Interview: Interview with Brad Gray for Personalized Medicine.

PubMed

Gray, Brad

2011-05-01

On 29 June 2010 Brad Gray became the President and Chief Executive Officer of the privately held life sciences company NanoString Technologies, WA, USA. Previously the Vice President of Product and Business Development at Genzyme Genetics, the diagnostic services division of Genzyme Corporation, Brad was in charge of developing molecular diagnostics and partnering activities. In December 2010, NanoString announced its securing of an exclusive worldwide license to develop in vitro diagnostic and research products for breast cancer intrinsic subtyping with the PAM50 gene signature. Brad Gray received a BA in Economics and Management from Oxford University, where he studied as a British Marshall Scholar, and an SB in Chemical Engineering from the Massachusetts Institute of Technology. Brad was also a management consultant in the healthcare practice of McKinsey & Company.

13. INTERIOR OF ENGINE ROOM, CONTAINING MESTACORLISS CROSSCOMPOUND ENGINE, FOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. INTERIOR OF ENGINE ROOM, CONTAINING MESTA-CORLISS CROSS-COMPOUND ENGINE, FOR 40" BLOOMING MILL. THIS VIEW HIGHLIGHTS THE CRANK AND 24' DIAMETER FLYWHEEL. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

75 FR 17703 - Combined Notice of Filings # 1

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-07

...: Southwest Power Pool, Inc submits Substitute Sixth Revised Sheet 14 et al to its FERC Electric Tariff, Fifth...: Central Maine Power Company. Description: Central Maine Power Company submits Engineering and Procurement.... Docket Numbers: ER10-911-001. Applicants: Wisconsin Electric Power Company. Description: Wisconsin...

Ethics in biomedical engineering.

PubMed

Morsy, Ahmed; Flexman, Jennifer

2008-01-01

This session focuses on a number of aspects of the subject of Ethics in Biomedical Engineering. The session starts by providing a case study of a company that manufactures artificial heart valves where the valves were failing at an unexpected rate. The case study focuses on Biomedical Engineers working at the company and how their education and training did not prepare them to deal properly with such situation. The second part of the session highlights the need to learn about various ethics rules and policies regulating research involving human or animal subjects.

7. SHEET 1, CONTROL HOUSE FOR DRY DOCK. United Engineering ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. SHEET 1, CONTROL HOUSE FOR DRY DOCK. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities, Office Building. Plans, elevations, sections, details. John Hudspeth, Architect, at foot of Main Street, Alameda, Calif. Sheet no. 1 of 2 sheets, Plan no. 10,507. Various scales. January 4, 1943, last revised 1/28/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Control House for Dry Dock, 2900 Main Street, Alameda, Alameda County, CA

Business process re-engineering in the logistics industry: a study of implementation, success factors, and performance

NASA Astrophysics Data System (ADS)

Shen, Chien-wen; Chou, Ching-Chih

2010-02-01

As business process re-engineering (BPR) is an important foundation to ensure the success of enterprise systems, this study would like to investigate the relationships among BPR implementation, BPR success factors, and business performance for logistics companies. Our empirical findings show that BPR companies outperformed non-BPR companies, not only on information processing, technology applications, organisational structure, and co-ordination, but also on all of the major logistics operations. Comparing the different perceptions of the success factors for BPR, non-BPR companies place greater emphasis on the importance of employee involvement while BPR companies are more concerned about the influence of risk management. Our findings also suggest that management attitude towards BPR success factors could affect performance with regard to technology applications and logistics operations. Logistics companies which have not yet implemented the BPR approach could refer to our findings to evaluate the advantages of such an undertaking and to take care of those BPR success factors affecting performance before conducting BPR projects.

6. DETAIL OF UNITEDTOD TWINTANDEM STEAM ENGINE, SHOWING CRANK END ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. DETAIL OF UNITED-TOD TWIN-TANDEM STEAM ENGINE, SHOWING CRANK END OF LOW PRESSURE SIDE OF ENGINE. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

Analysis of the Lifecycle of Mechanical Engineering Products

NASA Astrophysics Data System (ADS)

Gubaydulina, R. H.; Gruby, S. V.; Davlatov, G. D.

2016-08-01

Principal phases of the lifecycle of mechanical engineering products are analyzed in the paper. The authors have developed methods and procedures to improve designing, manufacturing, operating and recycling of the machine. It has been revealed that economic lifecycle of the product is a base for appropriate organization of mechanical engineering production. This lifecycle is calculated as a minimal sum total of consumer and producer costs. The machine construction and its manufacturing technology are interrelated through a maximal possible company profit. The products are to be recycled by their producer. Recycling should be considered as a feedback phase, necessary to make the whole lifecycle of the product a constantly functioning self-organizing system. The principles, outlined in this paper can be used as fundamentals to develop an automated PLM-system.

Impact of synthetic biology and metabolic engineering on industrial production of fine chemicals.

PubMed

Jullesson, David; David, Florian; Pfleger, Brian; Nielsen, Jens

2015-11-15

Industrial bio-processes for fine chemical production are increasingly relying on cell factories developed through metabolic engineering and synthetic biology. The use of high throughput techniques and automation for the design of cell factories, and especially platform strains, has played an important role in the transition from laboratory research to industrial production. Model organisms such as Saccharomyces cerevisiae and Escherichia coli remain widely used host strains for industrial production due to their robust and desirable traits. This review describes some of the bio-based fine chemicals that have reached the market, key metabolic engineering tools that have allowed this to happen and some of the companies that are currently utilizing these technologies for developing industrial production processes. Copyright © 2015 Elsevier Inc. All rights reserved.

Development of a Course of Training Programs for Young Engineers at Work to Nurture the “Basic Competencies of Employees”

NASA Astrophysics Data System (ADS)

Itoh, Michiko; Jomura, Makoto; Hongo, Tetsuyuki; Chohji, Tetsuji

According to our feasibility study in 2005, many of small and medium-sized companies in and around Toyama city asked their young engineers for originality and strong will to try and solve problems positively in their workplaces. These skills have a lot in common with “Basic Competencies of Employees” advocated by the Ministry of Economy, Trade and Industry, Japan. Since Toyama National College of Technology has an accumulated educational know-how to nurture “Basic Competencies of Employees” , we have applied this to develop a course of training programs for young engineers. Through four year‧s practice and improvement, we have established and evaluated this training course. We show the details of our course in this report.

Aerial Video Imaging

NASA Technical Reports Server (NTRS)

1991-01-01

When Michael Henry wanted to start an aerial video service, he turned to Johnson Space Center for assistance. Two NASA engineers - one had designed and developed TV systems in Apollo, Skylab, Apollo- Soyuz and Space Shuttle programs - designed a wing-mounted fiberglass camera pod. Camera head and angles are adjustable, and the pod is shaped to reduce vibration. The controls are located so a solo pilot can operate the system. A microprocessor displays latitude, longitude, and bearing, and a GPS receiver provides position data for possible legal references. The service has been successfully utilized by railroads, oil companies, real estate companies, etc.

Confessions of a serial entrepreneur: a conversation with Alfred E. Mann. Interview by Molly Joel Coye.

PubMed

Mann, Alfred E

2006-01-01

In this wide-ranging interview, Alfred Mann describes the activities of several medical technology enterprises with which he is engaged. Several of them are companies that he formed; one is a nonprofit foundation, the Alfred E. Mann Foundation for Biomedical Engineering, founded to establish research-oriented institutes on a dozen university campuses and support their work in developing marketable innovations. Mann discusses the need to consider the cost implications of technology, in the context of U.S. health system reform, and describes several important innovations that have emerged from his companies over the years.

Training Program for Practical Engineering Design through the Collaboration with Regional Companies

NASA Astrophysics Data System (ADS)

Gofuku, Akio; Tabata, Nobuhisa; Tomita, Eiji; Funabiki, Nobuo

An education program to bring up engineering design capabilities through long-term internship by the collaboration with regional companies has been put in practice for five years. The program is composed of two types of long-term internships and several lectures for patent systems and engineering ethics. This paper describes the outline of the program, educational effects, and our experiences. The program was improved into two educational programs in 2011. The one is a special course to educate engineers and scientists who can lead the technologies of their domains. The other is a long-term internship program for master students in engineering divisions of graduate school. This paper also describes the current activities of the latter program.

Cross Functional Career Navigation: The Way to Broaden Your Career Options

NASA Astrophysics Data System (ADS)

Greenhalgh, Todd

2000-03-01

In today's rapid paced global environment, broadening career options for career development depends on successful cross-functional career navigation. For scientists and engineers, this means developing a diversity of skills in addition to a strong technical foundation. Fortunately, companies use cross-functional teams as one of the key tools for rapidly developing and commercializing products and services. Participation on these teams carries with it the additional benefit of allowing an individual to develop new skills, and to gain valuable expertise in areas that are critical to the growth of their company, their industry and, most importantly, their career. This talk will outline some of the important cross functional skills that can propel your career ahead and ways in which you can take charge of your career mapping and enhance your value and employability.

Terrestrial applications from space technology

NASA Technical Reports Server (NTRS)

Clarks, H.

1985-01-01

NASA's Technology Utilization Program, which is concerned with transferring aerospace technologies to the public and private sectors, is described. The strategy for transferring the NASA technologies to engineering projects includes: (1) identification of the problem, (2) selection of an appropriate aerospace technology, (3) development of a partnership with the company, (4) implementation of the project, and (5) commercialization of the product. Three examples revealing the application of aerospace technologies to projects in biomedical engineering, materials, and automation and robotics are presented; the development of a programmable, implantable medication system and a programmable, mask-based optical correlator, and the improvement of heat and erosion resistance in continuous casting are examined.

ECM soldering technologies for small businesses. Final report/project accomplishments summary, project number 93-KCPP-015-E1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Becka, G.A.

1997-03-01

The purpose of this outreach project was to demonstrate, transfer, and educate multiple small and medium-sized US firms in the methodology and technology of environmentally conscious manufacturing soldering techniques. Consultation on replacement solvents for ozone-depleting chemicals, low residue/no clean soldering, and lead-free solder alloys were examples of available FM and T expertise. Depending upon the needs, materials engineering or process engineering help was made available under the program. Requesting businesses could obtain up to 250 hours of assistance from AlliedSignal FM and T on these efforts. The participating companies mainly requested assistance with their immediate needs. Examples of assistance providedmore » included specialized training for their particular product line. FM and T Solder Certification School has an excellent reputation and responded with solder training and help with course outlines for the requesters. One company reported problems soldering certain components. FM and T evaluations determined that the company was received components with solderability levels that did not meet specification rather than experiencing a soldering process problem. Other companies received assistance in incorporating lead-free soldering materials into their production lines and development assistance with fluxless soldering processes. The project was terminated when it was determined that this need could be served by FM and T`s current Technical Assistance Program.« less

5. GENERAL VIEW OF UNITEDTOD TWIN TANDEM STEAM ENGINE. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. GENERAL VIEW OF UNITED-TOD TWIN TANDEM STEAM ENGINE. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

12. Detail of clutch and backup gasoline engine for powering ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. Detail of clutch and backup gasoline engine for powering Stoney gates. Clutch mechanism manufactured by Baldridge Machine Company, Detroit, Michigan, ca. 1910. Instrument to the left records volume of flow through headworks. View looking south towards Stoney gates. Photo by Jet Lowe, HAER, 1989. - Puget Sound Power & Light Company, White River Hydroelectric Project, 600 North River Avenue, Dieringer, Pierce County, WA

5. INDUSTRIAL PIPING SYSTEM FOR 500 H.P. LLEWELLYN BOILER, ADDITION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. INDUSTRIAL PIPING SYSTEM FOR 500 H.P. LLEWELLYN BOILER, ADDITION TO POWER HOUSE. United Engineering Company Ltd., Alameda Shipyard. John Hudspeth, architect, foot of Main Street, Alameda, California. Sheet M1. Plan no. 10,551. Scale 1/4 inch to the foot. June 1, 1945. pencil on vellum - United Engineering Company Shipyard, Boiler House, 2900 Main Street, Alameda, Alameda County, CA

Creative Engineering Based Education with Autonomous Robots Considering Job Search Support

NASA Astrophysics Data System (ADS)

Takezawa, Satoshi; Nagamatsu, Masao; Takashima, Akihiko; Nakamura, Kaeko; Ohtake, Hideo; Yoshida, Kanou

The Robotics Course in our Mechanical Systems Engineering Department offers “Robotics Exercise Lessons” as one of its Problem-Solution Based Specialized Subjects. This is intended to motivate students learning and to help them acquire fundamental items and skills on mechanical engineering and improve understanding of Robotics Basic Theory. Our current curriculum was established to accomplish this objective based on two pieces of research in 2005: an evaluation questionnaire on the education of our Mechanical Systems Engineering Department for graduates and a survey on the kind of human resources which companies are seeking and their expectations for our department. This paper reports the academic results and reflections of job search support in recent years as inherited and developed from the previous curriculum.

Benefit from NASA

NASA Image and Video Library

1998-01-01

Don Sirois, an Auburn University research associate, and Bruce Strom, a mechanical engineering Co-Op Student, are evaluating the dimensional characteristics of an aluminum automobile engine casting. More accurate metal casting processes may reduce the weight of some cast metal products used in automobiles, such as engines. Research in low gravity has taken an important first step toward making metal products used in homes, automobiles, and aircraft less expensive, safer, and more durable. Auburn University and industry are partnering with NASA to develop one of the first accurate computer model predictions of molten metals and molding materials used in a manufacturing process called casting. Ford Motor Company's casting plant in Cleveland, Ohio is using NASA-sponsored computer modeling information to improve the casting process of automobile and light-truck engine blocks.

Improving Metal Casting Process

NASA Technical Reports Server (NTRS)

1998-01-01

Don Sirois, an Auburn University research associate, and Bruce Strom, a mechanical engineering Co-Op Student, are evaluating the dimensional characteristics of an aluminum automobile engine casting. More accurate metal casting processes may reduce the weight of some cast metal products used in automobiles, such as engines. Research in low gravity has taken an important first step toward making metal products used in homes, automobiles, and aircraft less expensive, safer, and more durable. Auburn University and industry are partnering with NASA to develop one of the first accurate computer model predictions of molten metals and molding materials used in a manufacturing process called casting. Ford Motor Company's casting plant in Cleveland, Ohio is using NASA-sponsored computer modeling information to improve the casting process of automobile and light-truck engine blocks.

Bringing Environmental Sustainability to Undergraduate Engineering Education: Experiences in an Inter-Disciplinary Course

ERIC Educational Resources Information Center

Aurandt, Jennifer; Borchers, Andrew Scott; Lynch-Caris, Terri; El-Sayed, Jacqueline; Hoff, Craig

2012-01-01

This paper chronicles the development of an interdisciplinary course in environmentally conscious design at Kettering University, a technologically focused Midwestern university. Funded by the National Science Foundation, a team of six faculty members at Kettering University adapted work done by Ford Motor Company to educate undergraduate STEM…

26 CFR 1.482-9 - Methods to determine taxable income in connection with a controlled services transaction.

Code of Federal Regulations, 2014 CFR

2014-04-01

... or other similar arrangement. (vi) Research, development, or experimentation. (vii) Engineering or... participant. (8) Examples. The application of this section is illustrated by the following examples. No... conclusion in any example. For purposes of Examples 1 through 14, assume that Company P and its subsidiaries...

26 CFR 1.482-9 - Methods to determine taxable income in connection with a controlled services transaction.

Code of Federal Regulations, 2013 CFR

2013-04-01

... or other similar arrangement. (vi) Research, development, or experimentation. (vii) Engineering or... participant. (8) Examples. The application of this section is illustrated by the following examples. No... conclusion in any example. For purposes of Examples 1 through 14, assume that Company P and its subsidiaries...

26 CFR 1.482-9 - Methods to determine taxable income in connection with a controlled services transaction.

Code of Federal Regulations, 2012 CFR

2012-04-01

... or other similar arrangement. (vi) Research, development, or experimentation. (vii) Engineering or... participant. (8) Examples. The application of this section is illustrated by the following examples. No... conclusion in any example. For purposes of Examples 1 through 14, assume that Company P and its subsidiaries...

26 CFR 1.482-9 - Methods to determine taxable income in connection with a controlled services transaction.

Code of Federal Regulations, 2011 CFR

2011-04-01

... or other similar arrangement. (vi) Research, development, or experimentation. (vii) Engineering or... participant. (8) Examples. The application of this section is illustrated by the following examples. No... conclusion in any example. For purposes of Examples 1 through 14, assume that Company P and its subsidiaries...

Innovations in education and approaches to assessment of regional educational systems

NASA Astrophysics Data System (ADS)

Bauer, V. I.; Iljinyh, V. D.; Bazanov, A. V.; Kozin, E. S.

2018-05-01

The analysis of the latest innovations in the Russian education and trends in the development of educational regional systems is provided. Approaches to assessing the effectiveness of the operation of the company-university system are discussed by an example of motor engineering training for the oil and gas industry.

Project Future. A Workplace Literacy Project.

ERIC Educational Resources Information Center

Jefferson County Public Schools, Louisville, KY.

This document contains 12 units of study for a competency-based workplace literacy program, developed by Jefferson County Public Schools in Louisville, Kentucky, for a local plastics and engineering company. Each unit covers between two and nine competencies. Of the 12 units, 5 are devoted to language skills and 7 are devoted to mathematics. Each…

Best Practices Case Study: Tommy Williams Homes -Gainesville, FL

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2011-04-01

Case study of Tommy Williams Homes who has continued to outsell the competition with sales increasing despite the recession thanks to a systems-engineering approach developed with DOE’s Building America that yields high energy efficiency, comfort, and indoor air quality. The company offers to pay buyers’ energy bills for the first year.

Advanced Automotive Diesel Assessment Program, executive summary

NASA Technical Reports Server (NTRS)

1983-01-01

The objectives of this analytical study were: to select one advanced automotive diesel engine (AAD) concept which would increase the tank mileage of a 3,000 pound passenger car from the present 35 mpg to at least 52 mpg; to identify long term component research and development work required to bring the selected concept to fruition; and to prepare a development strategy that will bring the selected concept to a prototype testing phase. Cummins Engine Company has completed this study. The selected concept is a 4 stroke cycle, direct injection, spark assisted, advanced adiabatic diesel engine with positive displacement compounding plus expander and part load air preheating. The engine does not use a liquid coolant nor liquid lubricants. It is a 4 cylinder, in-line, 77 mm bore x 77 mm stroke, 1.434 liters displacement engine weighing 300 lb, and rated at 70 BHP at 3000 rpm. Installation dimensions are 621 mm length x 589 mm width x 479 mm height (24.4 inch x 22 inch x 18.9 inch).

NASA Project Develops Next-Generation Low-Emissions Combustor Technologies

NASA Technical Reports Server (NTRS)

Lee, Chi-Ming; Chang, Clarence T.; Herbon, John T.; Kramer, Stephen K.

2013-01-01

NASA's Environmentally Responsible Aviation (ERA) Project is working with industry to develop the fuel flexible combustor technologies for a new generation of low-emissions engine targeted for the 2020 timeframe. These new combustors will reduce nitrogen oxide (NOx) emissions to half of current state-of-the-art (SOA) combustors, while simultaneously reducing noise and fuel burn. The purpose of the low NOx fuel-flexible combustor research is to advance the Technology Readiness Level (TRL) and Integration Readiness Level (IRL) of a low NOx, fuel flexible combustor to the point where it can be integrated in the next generation of aircraft. To reduce project risk and optimize research benefit NASA chose to found two Phase 1 contracts. The first Phase 1 contracts went to engine manufactures and were awarded to: General Electric Company, and Pratt & Whitney Company. The second Phase 1 contracts went to fuel injector manufactures Goodrich Corporation, Parker Hannifin Corporation, and Woodward Fuel System Technology. In 2012, two sector combustors were tested at NASA's ASCR. The results indicated 75% NOx emission reduction below the 2004 CAEP/6 regulation level.

KSC-2013-4197

NASA Image and Video Library

2013-11-20

VAN HORN, Texas – The sun sets over a test stand at Blue Origin’s West Texas facility. The company used this test stand to fire its powerful new hydrogen- and oxygen-fueled American rocket engine, the BE-3, on Nov. 20. The BE-3 fired at full power for more than two minutes to simulate a launch, then paused for about four minutes, mimicking a coast through space before it re-ignited for a brief final burn. The last phase of the test covered the work the engine could perform in landing the booster back softly on Earth. Blue Origin, a partner of NASA’s Commercial Crew Program, or CCP, is developing its Orbital Launch Vehicle, which could eventually be used to launch the company's Space Vehicle into orbit to transport crew and cargo to low-Earth orbit. CCP is aiding in the innovation and development of American-led commercial capabilities for crew transportation and rescue services to and from the station and other low-Earth orbit destinations by the end of 2017. For information about CCP, visit www.nasa.gov/commercialcrew. Photo credit: NASA/Lauren Harnett

An Overview of SBIR Phase 2 Airbreathing Propulsion Technologies

NASA Technical Reports Server (NTRS)

Nguyen, Hung D.; Steele, Gynelle C.; Bitler, Dean W.

2014-01-01

Technological innovation is the overall focus of NASA's Small Business Innovation Research (SBIR) program. The program invests in the development of innovative concepts and technologies to help NASA's mission directorates address critical research and development needs for agency projects. This report highlights innovative SBIR Phase II projects from 2007-2012 specifically addressing areas in Airbreathing Propulsion which is one of six core competencies at NASA Glenn Research Center. There are twenty technologies featured with emphasis on a wide spectrum of applications such as with a Turbo-Brayton cryocooler for aircraft superconducting systems, braided composite rotorcraft structures, engine air brake, combustion control valve, flexible composite driveshaft, and much more. Each article in this booklet describes an innovation, technical objective, and highlights NASA commercial and industrial applications. This report serves as an opportunity for NASA personnel including engineers, researchers, and program managers to learn of NASA SBIR's capabilities that might be crosscutting into this technology area. As the result, it would cause collaborations and partnerships between the small companies and NASA Programs and Projects resulting in benefit to both SBIR companies and NASA.

Team-Based Development of Medical Devices: An Engineering-Business Collaborative.

PubMed

Eberhardt, Alan W; Johnson, Ophelia L; Kirkland, William B; Dobbs, Joel H; Moradi, Lee G

2016-07-01

There is a global shift in the teaching methodology of science and engineering toward multidisciplinary, team-based processes. To meet the demands of an evolving technical industry and lead the way in engineering education, innovative curricula are essential. This paper describes the development of multidisciplinary, team-based learning environments in undergraduate and graduate engineering curricula focused on medical device design. In these programs, students actively collaborate with clinicians, professional engineers, business professionals, and their peers to develop innovative solutions to real-world problems. In the undergraduate senior capstone courses, teams of biomedical engineering (BME) and business students have produced and delivered numerous functional prototypes to satisfied clients. Pursuit of commercialization of devices has led to intellectual property (IP) disclosures and patents. Assessments have indicated high levels of success in attainment of student learning outcomes and student satisfaction with their undergraduate design experience. To advance these projects toward commercialization and further promote innovative team-based learning, a Master of Engineering (MEng) in Design and Commercialization was recently launched. The MEng facilitates teams of graduate students in engineering, life sciences, and business who engage in innovation-commercialization (IC) projects and coursework that take innovative ideas through research and development (R&D) to create marketable devices. The activities are structured with students working together as a "virtual company," with targeted outcomes of commercialization (license agreements and new start-ups), competitive job placement, and/or career advancement.

Engineering--A Career for 330 Women at Boeing

ERIC Educational Resources Information Center

Minor, Barbara

1974-01-01

Describes the efforts of the Boeing Company to encourage and hire women for engineering jobs. Much of the article is devoted to women employed by Boeing in engineering jobs and their comments about engineering as a career for women. (BR)

11. DETAIL OF UNITEDTOD TWINTANDEM STEAM ENGINE, SHOWING HIGHPRESSURE CYLINDER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. DETAIL OF UNITED-TOD TWIN-TANDEM STEAM ENGINE, SHOWING HIGH-PRESSURE CYLINDER AND VALVE, AND LUBRICATING EQUIPMENT FOR ENGINE. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

A strategy to assist management in workforce engagement and employee retention in the high tech engineering environment.

PubMed

Kennedy, Elizabeth; Daim, Tugrul U

2010-11-01

Many companies use survey methods in an attempt to gauge employees' attitudes and opinions toward the company. These attitudes and opinions are directly related to an employee's engagement within the company. In many instances, employees wait in vain for the survey response and the subsequent employer actions, but the truth is sometimes management does not know what to do with the results. For this reason, we theorize that this type of survey, typically utilizing the Likert-scale, is not adequately assisting management in addressing employee engagement and retention issues. For instance, in many occasions, once the survey results are tabulated, companies are doing little or nothing to address the issues. In fact, far too many companies make the mistake of conducting employee engagement surveys, and then ignore the answers. Thus, we propose that a company should take advantage of the survey results, and utilize them to provide data to bridge employees' needs and goals with stakeholders' responsibilities and goals by refining and incorporating them into a hierarchical decision model (HDM). Thus, this would essentially be utilizing the quantitative data to determine what to measure qualitatively. We use a case from the high tech industry, specifically focusing on the engineering environment. Engineering environments are known to be more creative and such approaches would be more beneficial. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

Development of InCVAX as a novel in situ autologous vaccine for metastatic cancers (Conference Presentation)

NASA Astrophysics Data System (ADS)

Hode, Tomas; Alleruzzo, Luciano; Raker, Joseph; Lam, Samuel Siu Kit; Nordquist, Robert E.; Chen, Wei R.

2016-03-01

A novel method, an in situ autologous whole-cell cancer vaccine (inCVAX), is being developed by Immunophotonics, Inc., for the treatment of metastatic cancers. inCVAX combines phototherapy and immunotherapy to potentially induce a systemic anti-tumor immune response in the hosts. Immunophotonics and its academic partners have spent years conducting nonclinical research, developing CMC techniques and conducting clinical research. In 2015 the company initiated a late-stage (II/III) clinical trial in South America for advanced breast cancer patients. The process of developing the inCVAX approach from a laboratory setting into clinical trials requires significant efforts from a group of dedicated engineers, scientists, and physicians. The growth of the company and its business advances demonstrated the determination of a group of visionary investors, entrepreneurs, and business leaders. This talk will chronicle the milestones of the scientific achievement, medical progress, and business development of Immunophotonics.

Development of a solar receiver for an organic Rankine cycle engine

NASA Astrophysics Data System (ADS)

Haskins, H. J.; Taylor, R. M.; Osborn, D. B.

A prototype power conversion assembly (PCA) developed by an American aerospace company is considered. The PCA will be mounted at the focal point of a 12 meter parabolic dish and will produce approximately 20 kW of 3 kHz ac power to a ground-mounted rectifier. The PCA includes a cavity receiver coupled to an organic Rankine cycle engine. The engine working fluid is toluene. The performance goals of the receiver design are to maximize both the thermal efficiency and the heat capacity of the core. The latter goal is desired for stabilizing the PCA operation during intermittent cloud cover. The receiver design is based upon the utilization of a direct-heated copper shell. It was necessary to develop a feasible manufacturing process for assuring a good braze joint between the stainless steel, containing the toluene, and the copper shell.

Development of a solar receiver for an organic Rankine cycle engine

NASA Technical Reports Server (NTRS)

Haskins, H. J.; Taylor, R. M.; Osborn, D. B.

1981-01-01

A prototype power conversion assembly (PCA) developed by an American aerospace company is considered. The PCA will be mounted at the focal point of a 12 meter parabolic dish and will produce approximately 20 kW of 3 kHz ac power to a ground-mounted rectifier. The PCA includes a cavity receiver coupled to an organic Rankine cycle engine. The engine working fluid is toluene. The performance goals of the receiver design are to maximize both the thermal efficiency and the heat capacity of the core. The latter goal is desired for stabilizing the PCA operation during intermittent cloud cover. The receiver design is based upon the utilization of a direct-heated copper shell. It was necessary to develop a feasible manufacturing process for assuring a good braze joint between the stainless steel, containing the toluene, and the copper shell.

Impact of accelerated plant growth on seed variety development

NASA Astrophysics Data System (ADS)

Christophersen, Eric

1998-01-01

The commercial lives of agricultural seed products have steadily declined in recent years. The introduction of genetically engineered crop seeds in 1966 has accentuated that trend. Widespread grower demand for genetically engineered seed requires competitive response by industry followers in order to avert market share losses to the industry leaders. Limitations on plant transformation technology, regulatory requirements and patent impediments require companies to rapidly convert transformed lines into elite commercial products. Massive multigenerational backcrossing efforts are required to distribute genetically engineered traits into a broad product mix. Significant incidents of expression failures, or ``gene silencing,'' have occurred unexpectedly, requiring product substitution strategies. First-to-market strategies, competitive response, broad germplasm conversion and rescue of product failures all share the element of urgency. Technologies which reliably accelerate product development rates can expect favorable reception by commercial seed developers. A growth chamber which dramatically accelerates the rate of plant growth is described.

16. INTERIOR OF ENGINE ROOM, CONTAINING MESTACORLISS CROSSCOMPOUND ENGINE, FOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

16. INTERIOR OF ENGINE ROOM, CONTAINING MESTA-CORLISS CROSS-COMPOUND ENGINE, FOR 40" BLOOMING MILL. THIS VIEW IS TAKEN FROM THE HIGH-PRESSURE SIDE OF THE ENGINE SHOWING THE SERVICE PLATFORM - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

Controlling Rapid Change Through Systems Engineering the Organization

NASA Technical Reports Server (NTRS)

Hihn, Jairus; Wheeler, Rebecca; Zak, Haya

2000-01-01

A new approach to change management has been developed and applied at the Jet Propulsion Laboratory (JPL). It's main focus is on aligning the organization with the strategic plan; and understanding the internal organizational relationships that impact change, which ultimately determine an organizations ability to be transformed and renewed The new approach regards the strategic plan of a company as the standard by which progress and achievement are measured. Purposeful interventions should generate a company movement along a strategic course, and tracking that movement is essential for managing change. This paper presents an overview of DYNOMO, or the DYNamic Organizational MOdel which was developed to assist in the measurement and analysis of organizational state. The paper concludes with summaries of two applications.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kennedy, W.S.; Kovacic, S.M.; Rea, E.C.

The development of ballistic missiles and particularly intercontinental ballistic missiles (ICBMs) by the U.S. space technology manufacturer is examined. Collaboration by the company with the U.S. Air Force is described which began in the 1950s and combined systems engineering and technical assistance. Missile products reviewed in this paper include Atlas, Thor, Titans I and II, Minuteman I, II, III, the Peacekeeper, and the small ICBM. The company developed facilities and programs to support the R and D activities for the missile products, and descriptions are given of the Space Technologies Laboratory and the Ballistic Missiles Division. Contributions to ICBM technologiesmore » by the concern include carbon-carbon nozzle materials, propellant formulation data, movable nozzles, casting techniques for large volumes of propellants, and studies of fracture mechanics. 41 refs.« less

Voltage Controller

NASA Technical Reports Server (NTRS)

1997-01-01

Power Efficiency Corporation, specifically formed to manufacture and develop products from NASA technology, has a license to a three-phase power factor controller originally developed by Frank Nola, an engineer at Marshall Space Flight Center. Power Efficiency and two major distributors, Performance Control and Edison Power Technologies, use the electronic control boards to assemble three different motor controllers: Power Commander, Performance Controller, and Energy Master. The company Power Factor Controller reduces excessive energy waste in AC induction motors. It is used in industries and applications where motors operate under variable loads, including elevators and escalators, machine tools, intake and exhaust fans, oil wells, conveyors, pumps, die casting, and compressors. Customer lists include companies such as May Department Stores, Caesars Atlantic City, Ford Motors, and American Axle.

Open the `black box' creativity and innovation: a study of activities in R&D departments. Some prospects for engineering education

NASA Astrophysics Data System (ADS)

Millet, Charlyne; Oget, David; Cavallucci, Denis

2017-11-01

Innovation is a key component to the success and longevity of companies. Our research opens the 'black box' of creativity and innovation in R&D teams. We argue that understanding the nature of R&D projects in terms of creativity/innovation, efficiency/inefficiency, is important for designing education policies and improving engineering curriculum. Our research addresses the inventive design process, a lesser known aspect of the innovation process, in 197 R&D departments of industrial sector companies in France. One fundamental issue facing companies is to evaluate processes and results of innovation. Results show that the evaluation of innovation is confined by a lack of methodology of inventive projects. We will be establishing the foundations of a formal ontology for inventive design projects and finally some recommendations for engineering education.

The Telephone Company Agrees

ERIC Educational Resources Information Center

Stokes, Rembert R.

1975-01-01

A representative of the American Telephone and Telegraph Company responds to a statement by the director of the National Institute for Rehabilitation Engineering on telephone communication systems for the hearing impaired. (GW)

77 FR 47058 - Transcontinental Gas Pipe Line Company, LLC; Notice of Availability of the Environmental...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-07

... Corps of Engineers, and U.S. Department of Transportation Pipeline and Hazardous Materials Safety...] Transcontinental Gas Pipe Line Company, LLC; Notice of Availability of the Environmental Assessment for the...) proposed by Transcontinental Gas Pipe Line Company (Transco) in the above-referenced docket. Transco...

40 CFR 1042.640 - Special provisions for branded engines.

Code of Federal Regulations, 2011 CFR

2011-07-01

.... 1042.640 Section 1042.640 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... apply if you identify the name and trademark of another company instead of your own on your emission... the other company that obligates that company to take the following steps: (1) Meet the emission...

40 CFR 1042.640 - Special provisions for branded engines.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... 1042.640 Section 1042.640 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... apply if you identify the name and trademark of another company instead of your own on your emission... the other company that obligates that company to take the following steps: (1) Meet the emission...

40 CFR 1042.640 - Special provisions for branded engines.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... 1042.640 Section 1042.640 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... apply if you identify the name and trademark of another company instead of your own on your emission... the other company that obligates that company to take the following steps: (1) Meet the emission...

40 CFR 1042.640 - Special provisions for branded engines.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... 1042.640 Section 1042.640 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... apply if you identify the name and trademark of another company instead of your own on your emission... the other company that obligates that company to take the following steps: (1) Meet the emission...

77 FR 41806 - RG Steel Sparrows Point LLC, Formerly Known as Severstal Sparrows Point LLC, a Subsidiary of RG...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-16

... Leased Workers From Echelon Service Company, Sun Associated Industries, INC., MPI Consultants LLC... International, including on-site leased workers from Echelon Service Company, Sun Associated Industries, Inc... Company, Sun Associated Industries, Inc., MPI Consultants LLC, Alliance Engineering, Inc., Washington...

Fundamentals of Friction: Macroscopic and Microscopic Processes. Proceedings of the NATO Advanced Study Institute on Fundamentals of Friction Held In Germany on July 29 - August 9, 1991

DTIC Science & Technology

1991-08-09

processes Prof T E Fischer, Stevens Institute of Technology, Hoboken, USA. Friction of granular materials Dr M J Adams, Unilever Research, Wirral, England...Army Research Office, ERO US National Science Foundation US Office of Naval Research, ERO Unilever Research and Engineering Division Mobil Research and...Development Corporation Exxon Research and Engineering Company . We are especially grateful to the ASI Administrator, Mr M G de St V Atkins, who was

Bank Record Processing

NASA Technical Reports Server (NTRS)

1982-01-01

Barnett Banks of Florida, Inc. operates 150 banking offices in 80 Florida cities. Banking offices have computerized systems for processing deposits or withdrawals in checking/savings accounts, and for handling commercial and installment loan transactions. In developing a network engineering design for the terminals used in record processing, an affiliate, Barnett Computing Company, used COSMIC's STATCOM program. This program provided a reliable network design tool and avoided the cost of developing new software.

An Educational Program of Engineering Ethics and Its Dissemination Activity

NASA Astrophysics Data System (ADS)

Muramatsu, Ryujiro; Nagashima, Shigeo

Education on ethics for corporate employees, especially for engineers, seems to become increasingly important for most of companies in Japan, because some affairs or scandals caused by ethical problem in many companies were likely to subject them to operational disadvantages. Even in Hitachi, Ltd., we have worked on education of engineering ethics for two years. In this paper, we describe some activities of committees on engineering ethics, an e-learning training course which is usable on our intranet e-learning system, and a short-term in-house training course operated regularly in our training institute. And we also refer to its dissemination activities to employees in each division and some subsidiaries.

47 CFR 32.6535 - Engineering expense.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 2 2014-10-01 2014-10-01 false Engineering expense. 32.6535 Section 32.6535... FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6535 Engineering expense. (a) This account shall include costs incurred in the general engineering of the telecommunications plant...

47 CFR 32.6535 - Engineering expense.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 2 2011-10-01 2011-10-01 false Engineering expense. 32.6535 Section 32.6535... FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6535 Engineering expense. (a) This account shall include costs incurred in the general engineering of the telecommunications plant...

47 CFR 32.6535 - Engineering expense.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 2 2012-10-01 2012-10-01 false Engineering expense. 32.6535 Section 32.6535... FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6535 Engineering expense. (a) This account shall include costs incurred in the general engineering of the telecommunications plant...

47 CFR 32.6535 - Engineering expense.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 2 2013-10-01 2013-10-01 false Engineering expense. 32.6535 Section 32.6535... FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6535 Engineering expense. (a) This account shall include costs incurred in the general engineering of the telecommunications plant...

47 CFR 32.6535 - Engineering expense.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Engineering expense. 32.6535 Section 32.6535... FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6535 Engineering expense. (a) This account shall include costs incurred in the general engineering of the telecommunications plant...

Computer Program for Steady Transonic Flow over Thin Airfoils by Finite Elements

DTIC Science & Technology

1975-10-01

COMPUTER PROGRAM FOR STEADY JJ TRANSONIC FLOW OVER THIN AIRFOILS BY g FINITE ELEMENTS • *q^^ r ̂ c HUNTSVILLE RESEARCH & ENGINEERING CENTER...jglMMi B Jun’ INC ORGANIMTION NAME ANO ADDRESS Lö^kfteed Missiles & Space Company, Inc. Huntsville Research & Engineering Center,^ Huntsville, Alab...This report was prepared by personnel in the Computational Mechamcs Section of the Lockheed Missiles fc Space Company, Inc.. Huntsville Research

Monsanto may bypass NIH in microbe test.

PubMed

Sun, Marjorie

1985-01-11

The Monsanto Company is planning to ask the Environmental Protection Agency for clearance to field test a genetically engineered microbial pesticide, bypassing the traditional approval process of the National Institutes of Health. Although only federally funded institutions are required to obtain NIH approval for genetic engineering tests, Monsanto is the first company to bypass the NIH regulatory process, which has become mired in a lawsuit brought by Jeremy Rifkin.

Commercial Aircraft Airframe Fuel Systems Survey and Analysis.

DTIC Science & Technology

1982-07-01

Type of Report end Period Covered Ag Sponsorin ncy Na.e and Address FINAL REPORT U.S. DEPARTMENT OF TRANSPORTATION October, 1980 - June, 1982 FEDERAL...Philadelphia, Pennsylvania Weybridge, Surry England KT130SF Mr. Roy Riseley Mr. William Miles de Havilland Aircraft Cessna Aircraft Company Garratt Blvd. Wallace...Guido F. Pesotti Mr. Frank C. Davis Technical Director Engineering Specialist Empresa Brasileira Aeronautica, S.A. Garrett Turbine Engine Company

Integrated continuous bioprocessing: Economic, operational, and environmental feasibility for clinical and commercial antibody manufacture.

PubMed

Pollock, James; Coffman, Jon; Ho, Sa V; Farid, Suzanne S

2017-07-01

This paper presents a systems approach to evaluating the potential of integrated continuous bioprocessing for monoclonal antibody (mAb) manufacture across a product's lifecycle from preclinical to commercial manufacture. The economic, operational, and environmental feasibility of alternative continuous manufacturing strategies were evaluated holistically using a prototype UCL decisional tool that integrated process economics, discrete-event simulation, environmental impact analysis, operational risk analysis, and multiattribute decision-making. The case study focused on comparing whole bioprocesses that used either batch, continuous or a hybrid combination of batch and continuous technologies for cell culture, capture chromatography, and polishing chromatography steps. The cost of goods per gram (COG/g), E-factor, and operational risk scores of each strategy were established across a matrix of scenarios with differing combinations of clinical development phase and company portfolio size. The tool outputs predict that the optimal strategy for early phase production and small/medium-sized companies is the integrated continuous strategy (alternating tangential flow filtration (ATF) perfusion, continuous capture, continuous polishing). However, the top ranking strategy changes for commercial production and companies with large portfolios to the hybrid strategy with fed-batch culture, continuous capture and batch polishing from a COG/g perspective. The multiattribute decision-making analysis highlighted that if the operational feasibility was considered more important than the economic benefits, the hybrid strategy would be preferred for all company scales. Further considerations outside the scope of this work include the process development costs required to adopt continuous processing. © 2017 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers Biotechnol. Prog., 33:854-866, 2017. © 2017 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers.

Water Injection Feasibility for Boeing 747 Aircraft

NASA Technical Reports Server (NTRS)

Daggett, David L.

2005-01-01

Can water injection be offered at a reasonable cost to large airplane operators to reduce takeoff NO( sub x) emissions? This study suggests it may be possible. This report is a contract deliverable to NASA Glenn Research Center from the prime contractor, The Boeing Commercial Airplane Company of Seattle, WA. This study was supported by a separate contract to the Pratt & Whitney Engine Company of Hartford, CT (contract number NNC04QB58P). Aviation continues to grow and with it, environmental pressures are increasing for airports that service commercial airplanes. The feasibility and performance of an emissions-reducing technology, water injection, was studied for a large commercial airplane (e.g., Boeing 747 with PW4062 engine). The primary use of the water-injection system would be to lower NOx emissions while an important secondary benefit might be to improve engine turbine life. A tradeoff exists between engine fuel efficiency and NOx emissions. As engines improve fuel efficiency, by increasing the overall pressure ratio of the engine s compressor, the resulting increased gas temperature usually results in higher NOx emissions. Low-NO(sub x) combustors have been developed for new airplanes to control the increases in NO(sub x) emissions associated with higher efficiency, higher pressure ratio engines. However, achieving a significant reduction of NO(sub x) emissions at airports has been challenging. Using water injection during takeoff has the potential to cut engine NO(sub x) emissions some 80 percent. This may eliminate operating limitations for airplanes flying into airports with emission constraints. This study suggests an important finding of being able to offer large commercial airplane owners an emission-reduction technology that may also save on operating costs.

Engineering Ethics : The Second Report on Student Awareness and Course Methodology

NASA Astrophysics Data System (ADS)

Abe, Takao; Hachimori, Akira; Honywood, Michael

This paper is the second one detailing the findings of a questionnaire survey administered to gauge respondents' awareness of engineering ethics. The survey was carried out with the cooperation of Japanese, South Korean, and Chinese universities as well as a number of Japanese corporations. Our findings indicate that while students and company employees alike generally exhibit an appetite for learning about engineering ethics, South Korean and Chinese students have adopted a posture that is more conducive to such study than their Japanese counterparts. We also discovered a number of other differences rooted in students' nationality. Engineering ethics content seems to receive little attention in corporate training programs. Small and medium size companies in particular may not be addressing questions of engineering ethics in an aggressive manner.

46. Interior detail of barge crane engine house with machinery. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

46. Interior detail of barge crane engine house with machinery. Lambert Hoisting Engine Company Winder Powered by A Gray Marine Diesel. - Barbour Boat Works, Tryon Palace Drive, New Bern, Craven County, NC

Pioneering Integrated Education and Research Program in Graduate School of Engineering and its Inquiry by Questionnaire

NASA Astrophysics Data System (ADS)

Minamino, Yoritoshi

Department of Adaptive Machine Systems, Department of Materials and Manufucturing Science and Department of Business engineering have constructed the educational programs of consecutive system from master to doctor courses in graduate school of engineering, “Pioneering Integrated Education and Research Program (PP) ”, to produce volitional and original mind researchers with high abilities of research, internationality, leader, practice, management and economics by cooperation between them for reinforcement of their ordinary curriculums. This program consists of the basic PP for master course students and the international exchange PP, leadership pp and tie-up PP of company and University for Doctor course students. In 2005th the basic PP was given to the master course students and then their effectiveness of the PP was investigated by questionnaire. The results of questionnaire proved that the graduate school students improved their various abilities by the practical lesson in cooperation between companies and our Departments in the basic PP, and that the old boys after basic PP working in companies appreciated the advantages to business planning, original conception, finding solution, patents, discussion, report skills required in companies.

Predictive Model and Methodology for Heat Treatment Distortion Final Report CRADA No. TC-298-92

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nikkel, D. J.; McCabe, J.

This project was a multi-lab, multi-partner CRADA involving LLNL, Los Alamos National Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, Martin Marietta Energy Systems and the industrial partner, The National Center of Manufacturing Sciences (NCMS). A number of member companies of NCMS participated including General Motors Corporation, Ford Motor Company, The Torrington Company, Gear Research, the Illinois Institute of Technology Research Institute, and Deformation Control Technology •. LLNL was the lead laboratory for metrology technology used for validation of the computational tool/methodology. LLNL was also the lead laboratory for the development of the software user interface , for the computationalmore » tool. This report focuses on the participation of LLNL and NCMS. The purpose of the project was to develop a computational tool/methodology that engineers would use to predict the effects of heat treatment on the _size and shape of industrial parts made of quench hardenable alloys. Initially, the target application of the tool was gears for automotive power trains.« less

FBIS report. Science and technology: Europe/International, March 29, 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-03-29

;Partial Contents: Advanced Materials (EU Project to Improve Production in Metal Matrix Compounds Noted, Germany: Extremely Hard Carbon Coating Development, Italy: Director of CNR Metallic Materials Institute Interviewed); Aerospace (ESA Considers Delays, Reductions as Result of Budget Cuts, Italy: Space Agency`s Director on Restructuring, Future Plans); Automotive, Transportation (EU: Clean Diesel Engine Technology Research Reviewed); Biotechnology (Germany`s Problems, Successes in Biotechnology Discussed); Computers (EU Europort Parallel Computing Project Concluded, Italy: PQE 2000 Project on Massively Parallel Systems Viewed); Defense R&D (France: Future Tasks of `Brevel` Military Intelligence Drone Noted); Energy, Environment (German Scientist Tests Elimination of Phosphates); Advanced Manufacturing (France:more » Advanced Rapid Prototyping System Presented); Lasers, Sensors, Optics (France: Strategy of Cilas Laser Company Detailed); Microelectronics (France: Simulation Company to Develop Microelectronic Manufacturing Application); Nuclear R&D (France: Megajoule Laser Plan, Cooperation with Livermore Lab Noted); S&T Policy (EU Efforts to Aid Small Companies` Research Viewed); Telecommunications (France Telecom`s Way to Internet).« less

Defence electronics industry profile, 1990-1991

NASA Astrophysics Data System (ADS)

The defense electronics industry profiled in this review comprises an estimated 150 Canadian companies that develop, manufacture, and repair radio and communications equipment, radars for surveillance and navigation, air traffic control systems, acoustic and infrared sensors, computers for navigation and fire control, signal processors and display units, special-purpose electronic components, and systems engineering and associated software. Canadian defense electronics companies generally serve market niches and end users of their products are limited to the military, government agencies, or commercial airlines. Geographically, the industry is concentrated in Ontario and Quebec, where about 91 percent of the industry's production and employment is found. In 1989, the estimated revenue of the industry was $2.36 billion, and exports totalled an estimated $1.4 billion. Strengths and weaknesses of the industry are discussed in terms of such factors as the relatively small size of Canadian companies, the ability of Canadian firms to access research and development opportunities and export markets in the United States, the dependence on foreign-made components, and international competition.

10. DETAIL OF UNITEDTOD TWINTANDEM STEAM ENGINE, AS SEEN FROM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. DETAIL OF UNITED-TOD TWIN-TANDEM STEAM ENGINE, AS SEEN FROM HIGH-PRESSURE SIDE OF ENGINE (SPARE CRANK WAS KEPT AT THIS END) - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

7. DETAIL OF UNITEDTOD TWINTANDEM STEAM ENGINE, SHOWING CYLINDER AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. DETAIL OF UNITED-TOD TWIN-TANDEM STEAM ENGINE, SHOWING CYLINDER AND CROSS HEAD OF PISTON AT THE LOW PRESSURE SIDE OF ENGINE. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

8. DETAIL OF UNITEDTOD TWINTANDEM STEAM ENGINE, SHOWING CYLINDER AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. DETAIL OF UNITED-TOD TWIN-TANDEM STEAM ENGINE, SHOWING CYLINDER AND CROSS HEAD OF PISTON AT THE HIGH-PRESSURE SIDE OF ENGINE. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

Gender Bias in the Workplace: Should Women be Marginalized in Engineering Job?

NASA Astrophysics Data System (ADS)

Kurniawan, Y.; Nurhaeni, I. D. A.; Mugijatna; Habsari, S. K.

2018-02-01

Research observing women marginalization in the workplace viewed from the endusers have not been widely conducted. This article discusses about gender bias in the workplace from the perspective of the end-users of vocational higher education in terms of first, the companies’ policies in the salary payment and second the availability of companies’ policies in fulfilling the gender needs for male and female employees graduating from vocational schools. The research employing gender analysis was conducted in the Ex-Residency of Surakarta, Central Java Indonesia. The data were collected through documentation studies. The result shows that both male and female entrepreneurs have gender-biased view of women’s and men’s positions within the companies. Consequently, women’s salary tends to be lower than that of men for the same job and the companies were still not responsive to the different needs of women and men. Accordingly, local government should supervise the companies to implement gender mainstreaming in the workplace, especially in the employees’ career development and give rewards to companies implementing gender equality and otherwise give punishment to companies which have marginalized women in the workplace.

Methods for automated semantic definition of manufacturing structures (mBOM) in mechanical engineering companies

NASA Astrophysics Data System (ADS)

Stekolschik, Alexander, Prof.

2017-10-01

The bill of materials (BOM), which involves all parts and assemblies of the product, is the core of any mechanical or electronic product. The flexible and integrated management of engineering (Engineering Bill of Materials [eBOM]) and manufacturing (Manufacturing Bill of Materials [mBOM]) structures is the key to the creation of modern products in mechanical engineering companies. This paper presents a method framework for the creation and control of e- and, especially, mBOM. The requirements, resulting from the process of differentiation between companies that produce serialized or engineered-to-order products, are considered in the analysis phase. The main part of the paper describes different approaches to fully or partly automated creation of mBOM. The first approach is the definition of part selection rules in the generic mBOM templates. The mBOM can be derived from the eBOM for partly standardized products by using this method. Another approach is the simultaneous use of semantic rules, options, and parameters in both structures. The implementation of the method framework (selection of use cases) in a standard product lifecycle management (PLM) system is part of the research.

Wireless Rover Meets 3D Design and Product Development

ERIC Educational Resources Information Center

Deal, Walter F., III; Hsiung, Steve C.

2016-01-01

Today there are a number of 3D printing technologies that are low cost and within the budgets of middle and high school programs. Educational technology companies offer a variety of 3D printing technologies and parallel curriculum materials to enable technology and engineering teachers to easily add 3D learning activities to their programs.…

A Qualitative Examination of the Relationship between Organizational Culture and Innovation in a Global Engineering Company

ERIC Educational Resources Information Center

Sandler, Heidi J.

2016-01-01

The purpose of this grounded theory study was to examine the relationship between corporate culture (artifacts, values, and assumptions) and the creative endeavor of innovation in the software development industry. Innovation, the active implementation of creative ideas, is a widespread enterprise in the corporate world, especially in the areas of…

NREL Wins Prestigious UK "Academy Award" for Engineering | News | NREL

Science.gov Websites

College London (UCL), along with NASA, The European Synchrotron, and the UK National Physical Laboratory impressive company." UCL, NREL, NASA, and their partners were recognized in the category of Safety and Device developed by NREL and NASA to study failure mechanisms in Li-ion batteries and then recorded their

Managers in the Making: Careers, Development and Control in Corporate Britain and Japan.

ERIC Educational Resources Information Center

Storey, John; Edwards, Paul; Sisson, Keith

This book presents an analysis of the processes by which managers are made in Britain and Japan. It provides a detailed comparative study of the careers, training, developmental experience, and job demands of managers in eight companies in four sectors: engineering, banking, retail, and communications. Data are from the following sources:…

Analyzing Company Economics Using the Leontief Open Production Model

ERIC Educational Resources Information Center

Laumakis, Paul J.

2008-01-01

This article details the application of an economic theory to the fiscal operation of a small engineering consulting firm. Nobel Prize-winning economist Wassily Leontief developed his general input-output economic theory in the mid-twentieth century to describe the flow of goods and services in the U.S. economy. We use one mathematical model that…

Continuing Vocational Training in the Space Industry: A Siberian Case Study

ERIC Educational Resources Information Center

Churlyaeva, Natalya; Kukushkin, Sergey

2013-01-01

The development of a continuing vocational training programme at the Information Satellite Systems Joint-Stock Company (ISS JSC) during the transition from the planned Soviet economy to what is now called the Russian market economy is briefly outlined. How the collapse of a planned economy led to the degradation of engineering higher education…

Defense Supplier Base: DOD Should Leverage Ongoing Initiatives in Developing Its Program to Mitigate Risk of Counterfeit Parts

DTIC Science & Technology

2010-03-01

titanium, used in fighter jet engine mounts. Brake shoes Brake shoes were made with substandard materials, including seaweed . Source: DOD. DOD does...company. These brake shoes were made with various materials, including seaweed . U.S. customs agents had already seized the brake shoes and DOD never

Team-Based Development of Medical Devices: An Engineering–Business Collaborative

PubMed Central

Eberhardt, Alan W.; Johnson, Ophelia L.; Kirkland, William B.; Dobbs, Joel H.; Moradi, Lee G.

2016-01-01

There is a global shift in the teaching methodology of science and engineering toward multidisciplinary, team-based processes. To meet the demands of an evolving technical industry and lead the way in engineering education, innovative curricula are essential. This paper describes the development of multidisciplinary, team-based learning environments in undergraduate and graduate engineering curricula focused on medical device design. In these programs, students actively collaborate with clinicians, professional engineers, business professionals, and their peers to develop innovative solutions to real-world problems. In the undergraduate senior capstone courses, teams of biomedical engineering (BME) and business students have produced and delivered numerous functional prototypes to satisfied clients. Pursuit of commercialization of devices has led to intellectual property (IP) disclosures and patents. Assessments have indicated high levels of success in attainment of student learning outcomes and student satisfaction with their undergraduate design experience. To advance these projects toward commercialization and further promote innovative team-based learning, a Master of Engineering (MEng) in Design and Commercialization was recently launched. The MEng facilitates teams of graduate students in engineering, life sciences, and business who engage in innovation-commercialization (IC) projects and coursework that take innovative ideas through research and development (R&D) to create marketable devices. The activities are structured with students working together as a “virtual company,” with targeted outcomes of commercialization (license agreements and new start-ups), competitive job placement, and/or career advancement. PMID:26902869

Coatings Extend Life of Engines and Infrastructure

NASA Technical Reports Server (NTRS)

2010-01-01

MesoCoat Inc., of Euclid, Ohio, collaborated with Glenn Research Center to provide thermal barrier coating (TBC) technology, developed by Glenn researcher Dongming Zhu, to enhance the lifespan and performance of engines in U.S. Air Force legacy aircraft. The TBC reduces thermal stresses on engine parts, increasing component life by 50 percent. MesoCoat is also producing metal cladding technology that may soon provide similar life-lengthening benefits for the Nation's infrastructure. Through a Space Act Agreement with Glenn, the company employs the Center's high-density infrared arc lamp system to bond its cladding materials for demonstration prototypes; the coating technology can prevent corrosion on metal beams, pipes, and rebar for up to 100 years.

Key Future Engineering Capabilities for Human Capital Retention

NASA Astrophysics Data System (ADS)

Sivich, Lorrie

Projected record retirements of Baby Boomer generation engineers have been predicted to result in significant losses of mission-critical knowledge in space, national security, and future scientific ventures vital to high-technology corporations. No comprehensive review or analysis of engineering capabilities has been performed to identify threats related to the specific loss of mission-critical knowledge posed by the increasing retirement of tenured engineers. Archival data from a single diversified Fortune 500 aerospace manufacturing engineering company's engineering career database were analyzed to ascertain whether relationships linking future engineering capabilities, engineering disciplines, and years of engineering experience could be identified to define critical knowledge transfer models. Chi square, logistic, and linear regression analyses were used to map patterns of discipline-specific, mission-critical knowledge using archival data of engineers' perceptions of engineering capabilities, key developmental experiences, and knowledge learned from their engineering careers. The results from the study were used to document key engineering future capabilities. The results were then used to develop a proposed human capital retention plan to address specific key knowledge gaps of younger engineers as veteran engineers retire. The potential for social change from this study involves informing leaders of aerospace engineering corporations on how to build better quality mentoring or succession plans to fill the void of lost knowledge from retiring engineers. This plan can secure mission-critical knowledge for younger engineers for current and future product development and increased global competitiveness in the technology market.

Insights into software development in Japan

NASA Technical Reports Server (NTRS)

Duvall, Lorraine M.

1992-01-01

The interdependence of the U.S.-Japanese economies makes it imperative that we in the United States understand how business and technology developments take place in Japan. We can gain insight into these developments in software engineering by studying the context in which Japanese software is developed, the practices that are used, the problems encountered, the setting surrounding these problems, and the resolution of these problems. Context includes the technological and sociological characteristics of the software development environment, the software processes applied, personnel involved in the development process, and the corporate and social culture surrounding the development. Presented in this paper is a summary of results of a study that addresses these issues. Data for this study was collected during a three month visit to Japan where the author interviewed 20 software managers representing nine companies involved in developing software in Japan. These data are compared to similar data from the United States in which 12 managers from five companies were interviewed.

77 FR 4650 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-31

... blade borescope inspection (BSI) or a failed engine core vibration survey, establishes a new lower life... LPT rotor stage 3 disk removal after a failed HPT blade BSI or a failed engine core vibration survey... engine test cell as part of an engine manual performance run fulfill the vibration survey requirements of...

9. INTERIOR VIEW OF BREW HOUSE, STEAM ENGINE READS: HAMILTON ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. INTERIOR VIEW OF BREW HOUSE, STEAM ENGINE- READS: HAMILTON CORLISS ENGINES, THE HOOVEN, OWENS & RENTSCHLER CO., BUILDERS, HAMILTON, OHIO, U.S.A. - August Schell Brewing Company, Twentieth Street South, New Ulm, Brown County, MN

Application of Advanced Materials in Petroleum Engineering

NASA Astrophysics Data System (ADS)

Zhao, Gufan; Di, Weina; Wang, Minsheng

With the background of increasing requirements on the petroleum engineering technology from more high demanding exploration targets, global oil companies and oil service companies are making more efforts on both R&D and application of new petroleum engineering technology. Advanced materials always have a decisive role in the functionality of a new product. Technology transplantation has become the important means of innovation in oil and gas industry. Here, we mainly discuss the properties and scope of application of several advanced materials. Based on the material requirements in petroleum engineering, we provide several candidates for downhole electronics protection, drilling fluid additives, downhole tools, etc. Based on the analysis of petroleum engineering technology characteristics, this paper made analysis and research on such advanced materials as new insulation materials, functional gradient materials, self-healing polymers, and introduced their application prospect in petroleum engineering in terms of specific characteristics.

Application of the Simplified Dow Chemical Company Relative Ranking Hazard Assessment Method for Air Combat Command Bases

DTIC Science & Technology

1993-09-01

Chiras , Daniel D. Environmental Science . Redwood City, California: The Benjamin/Cummings Publishing Company, Inc., 1991. Cummings-Saxton, J., L...Engineering of the Air Force Institute of Technology Air University In Partial Fulfillment of the Requirements for the Degree of Master of Science in...Engineering and Environmental Management Raymond A. Sable, B. Architecture Captain, USAF, R.A. September 1993 Approved for public release; distribution

40 CFR 1039.640 - What special provisions apply to branded engines?

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION... following provisions apply if you identify the name and trademark of another company instead of your own on... contractual agreement with the other company that obligates that company to take the following steps: (1) Meet...

40 CFR 1039.640 - What special provisions apply to branded engines?

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION... following provisions apply if you identify the name and trademark of another company instead of your own on... contractual agreement with the other company that obligates that company to take the following steps: (1) Meet...

40 CFR 1039.640 - What special provisions apply to branded engines?

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION... following provisions apply if you identify the name and trademark of another company instead of your own on... contractual agreement with the other company that obligates that company to take the following steps: (1) Meet...

40 CFR 1039.640 - What special provisions apply to branded engines?

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION... following provisions apply if you identify the name and trademark of another company instead of your own on... contractual agreement with the other company that obligates that company to take the following steps: (1) Meet...

77 FR 50102 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-20

... Incorporated; Jacobs Engineering Group Incorporated; Foster Wheeler AG; Fluor Corporation. Obligor: The obligor is a special purpose vehicle anticipated to be named ``Sadara Chemical Company.'' Guarantor(s): The Dow Chemical Company, Dow Europe Holding B.V., and Saudi Arabian Oil Company. Description of Items...

75 FR 49526 - Halliburton Company, Duncan Mfg., Including On-Site Leased Workers from Express Personnel...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-13

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-70,232; TA-W-70,232A] Halliburton Company, Duncan Mfg., Including On-Site Leased Workers from Express Personnel, Clayton Personnel Service, and Manpower Planning, Duncan, OK; Halliburton Company, Technology and Engineering Division, Finance and Administration Division, Duncan, OK;...

77 FR 71731 - Airworthiness Directives; The Boeing Company

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-04

... inability of the forward engine mount bulkhead fittings to carry engine loads, resulting in the loss or... to carry engine loads, resulting in the loss or departure of an engine. Hydraulic embrittlement could... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2012...

Engine room, showing engine generator foundation and inlet louvers, looking ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Engine room, showing engine generator foundation and inlet louvers, looking southwest. Note fuel gauge on west wall, left of fuse box, and exhaust pipe through south wall. - Western Union Telegraph Company, Jennerstown Relay, Laurel Summit Road off U.S. 30, Laughlintown, Westmoreland County, PA

The Role of System Thinking Development and Experiential Learning on Enterprise Transformation

NASA Astrophysics Data System (ADS)

Lopez, Gabriel

The recent economic downturn has had global repercussions in all businesses alike. Competition is fierce and a survival of the fittest model is always present; fast delivery times and innovative designs ultimately translate into the enterprises' bottom line. In such market conditions, enterprises have to find ways to develop and train their workforce in a manner that enhances the innovative capabilities of the enterprise. Additionally, if companies are to stay competitive, they have to ensure critical skills in their workforce are transferred from generation to generation. This study builds on recent research on system-thinking development via experiential learning methodologies. First, a conceptual framework model was developed. This conceptual model captures a methodology to construct a system-thinking apprenticeship program suitable for system engineers. Secondly, a survey of system engineering professionals was conducted in order to assess and refine the proposed conceptual model. This dissertation captures the findings of the conceptual model and the implications of the study for enterprises and for system engineering organizations.

Engineered Chloroplast Genome just got Smarter

PubMed Central

Jin, Shuangxia; Daniell, Henry

2015-01-01

Chloroplasts are known to sustain life on earth by providing food, fuel and oxygen through the process of photosynthesis. However, the chloroplast genome has also been smartly engineered to confer valuable agronomic traits and/or serve as bioreactors for production of industrial enzymes, biopharmaceuticals, bio-products or vaccines. The recent breakthrough in hyper-expression of biopharmaceuticals in edible leaves has facilitated the advancement to clinical studies by major pharmaceutical companies. This review critically evaluates progress in developing new tools to enhance or simplify expression of targeted genes in chloroplasts. These tools hold the promise to further the development of novel fuels and products, enhance the photosynthetic process, and increase our understanding of retrograde signaling and cellular processes. PMID:26440432

A KSC engineer describes the new fertilizer-producing facility near Launch Pad 39A

NASA Technical Reports Server (NTRS)

2000-01-01

Clyde Parrish, a NASA/KSC engineer, explains how the fertilizer scrubber control panel (center) works to turn nitrogen tetroxide vapor into fertilizer, potassium hydroxide. Parrish developed the system, which uses a 'scrubber,' to capture nitrogen tetroxide vapor that develops as a by-product when it is transferred from ground storage tanks into the Shuttle storage tanks. Nitrogen tetroxide is used as the oxidizer for the hypergolic propellant in the Shuttle's on-orbit reaction control system. The scrubber then uses hydrogen peroxide to produce nitric acid, which, after adding potassium hydroxide, converts to potassium nitrate. The resulting fertilizer will be used on the orange groves that KSC leases to outside companies.

Rocket-Based Combined Cycle Engine Concept Development

NASA Technical Reports Server (NTRS)

Ratekin, G.; Goldman, Allen; Ortwerth, P.; Weisberg, S.; McArthur, J. Craig (Technical Monitor)

2001-01-01

The development of rocket-based combined cycle (RBCC) propulsion systems is part of a 12 year effort under both company funding and contract work. The concept is a fixed geometry integrated rocket, ramjet, scramjet, which is hydrogen fueled and uses hydrogen regenerative cooling. The baseline engine structural configuration uses an integral structure that eliminates panel seals, seal purge gas, and closeout side attachments. Engine A5 is the current configuration for NASA Marshall Space Flight Center (MSFC) for the ART program. Engine A5 models the complete flight engine flowpath of inlet, isolator, airbreathing combustor, and nozzle. High-performance rocket thrusters are integrated into the engine enabling both low speed air-augmented rocket (AAR) and high speed pure rocket operation. Engine A5 was tested in GASL's new Flight Acceleration Simulation Test (FAST) facility in all four operating modes, AAR, RAM, SCRAM, and Rocket. Additionally, transition from AAR to RAM and RAM to SCRAM was also demonstrated. Measured performance demonstrated vision vehicle performance levels for Mach 3 AAR operation and ramjet operation from Mach 3 to 4. SCRAM and rocket mode performance was above predictions. For the first time, testing also demonstrated transition between operating modes.

ACS News. Report Covers Layoffs by Six Companies

ERIC Educational Resources Information Center

Chemical and Engineering News, 1975

1975-01-01

Summarizes a report covering six layoffs involving 66 chemists and chemical engineers occurring from March to September 1974. Guidelines for employers were not met by some companies. Note is made of this. (EB)

Warning: Projects May Be Closer than They Appear

NASA Technical Reports Server (NTRS)

Africa, Colby

2004-01-01

I had been working for two years as the technical product manager for a large software company, when their partner company gave me a call. They needed good software engineers to customize a new version of software, and they thought I was their guy. They told me what they wanted to do to the software, and they even showed me some prototypes. Their idea was to take the basic software tool that the large company was producing and make it more accessible to the customer. They would do this by building in flexibility based on user skill level and organizational maturity. I thought that was a fascinating approach, and I bought into it in a big way. I decided to leave my job and join up with the smaller company as their director of software engineering.

Social license to operate: case from brazilian mining industry

NASA Astrophysics Data System (ADS)

Santiago, Ana Lúcia F.; Demajorovic, Jacques; Aledo, Antonio

2015-04-01

The approach of the Social License to Operate (SLO) emerges as an important element in academic discussions and business practices related to extractive industries. It appears that in productive activities with great potential to produce economic, social and environmental impacts, conventional approaches based on legal compliance no longer sufficient to legitimize the actions of companies and engagement stakeholders. Studies highlight the need of mining activities receiving a SLO "issued" by companies stakeholders, including society, government, non-governmental organizations, media and communities. However, local communities appears as major stakeholders in governance arrangements, by virtue of its proximity to extractive areas and ability to affect the company's results. Stakeholders with unmet expectations can generate conflicts and risks to the company, the knowledge of these expectations and an awareness of company managers of the importance of Social License to Operate (SLO), can generate strategies and mitigating actions to prevent and or minimize possible conflicts. The concept of SLO arises in engineering extractive industry, when you need to respond to social challenges, beyond the usual environmental challenges, technological and management. According to Franks and Cohen (2012) there is a tendency of engineering sectors, sustainability, environmental, safety and especially in risk mappings, treat the technological issues in a neutral manner, separating the technological research projects of social influences. I want to contribute to the advancement of the debate on stakeholder engagement and adopting as focus on the company's relationship with the community, the aim of this study was to understand how a social project held by one of the largest mining companies in Brazil contributed to the process of SLO. This methodological procedure adopted was a qualitative, descriptive, and exploratory interviews with the communities located in rural areas of direct influence of the company's approach. The results show that the strategy adopted by the company contributed to the process of SLO, furthermore it is necessary adopt strong methodologies that facilitate the engagement processes of the other company's stakeholders, as well as the challenge to keep on local legitimacy earned. Key words: Mining, social license to operate (SLO), social impact, corporate social responsibility, stakeholders. References: * FRANKS, DANIEL M.; COHEN, TAMAR. Social Licence in Design: Constructive technology assessment within a mineral research and development institution. Centre for Social Responsibility in Mining, Sustainable Minerals Institute, University of Queensland, Australia. 79 122 Technological Forecasting & Social Change. 2012.

Needs challenge software

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-07-01

New hardware and software tools build on existing platforms and add performance and ease-of-use benefits as the struggle to find and produce hydrocarbons at the lowest cost becomes more and more competitive. Software tools now provide geoscientists and petroleum engineers with a better understanding of reservoirs from the shape and makeup of formation to behavior projections as hydrocarbons are extracted. Petroleum software tools allow scientists to simulate oil flow, predict the life expectancy of a reservoir, and even help determine how to extend the life and economic viability of the reservoir. The requirement of the petroleum industry to find andmore » extract petroleum more efficiently drives the solutions provided by software and service companies. To one extent or another, most of the petroleum software products available today have achieved an acceptable level of competency. Innovative, high-impact products from small, focussed companies often were bought out by larger companies with deeper pockets if their developers couldn`t fund their expansion. Other products disappeared from the scene, because they were unable to evolve fast enough to compete. There are still enough small companies around producing excellent products to prevent the marketplace from feeling too narrow and lacking in choice. Oil companies requiring specific solutions to their problems have helped fund product development within the commercial sector. As the industry has matured, strategic alliances between vendors, both hardware and software, have provided market advantages, often combining strengths to enter new and undeveloped areas for technology. The pace of technological development has been fast and constant.« less

A game-based decision support methodology for competitive systems design

NASA Astrophysics Data System (ADS)

Briceno, Simon Ignacio

This dissertation describes the development of a game-based methodology that facilitates the exploration and selection of research and development (R&D) projects under uncertain competitive scenarios. The proposed method provides an approach that analyzes competitor positioning and formulates response strategies to forecast the impact of technical design choices on a project's market performance. A critical decision in the conceptual design phase of propulsion systems is the selection of the best architecture, centerline, core size, and technology portfolio. This selection can be challenging when considering evolving requirements from both the airframe manufacturing company and the airlines in the market. Furthermore, the exceedingly high cost of core architecture development and its associated risk makes this strategic architecture decision the most important one for an engine company. Traditional conceptual design processes emphasize performance and affordability as their main objectives. These areas alone however, do not provide decision-makers with enough information as to how successful their engine will be in a competitive market. A key objective of this research is to examine how firm characteristics such as their relative differences in completing R&D projects, differences in the degree of substitutability between different project types, and first/second-mover advantages affect their product development strategies. Several quantitative methods are investigated that analyze business and engineering strategies concurrently. In particular, formulations based on the well-established mathematical field of game theory are introduced to obtain insights into the project selection problem. The use of game theory is explored in this research as a method to assist the selection process of R&D projects in the presence of imperfect market information. The proposed methodology focuses on two influential factors: the schedule uncertainty of project completion times and the uncertainty associated with competitive reactions. A normal-form matrix is created to enumerate players, their moves and payoffs, and to formulate a process by which an optimal decision can be achieved. The non-cooperative model is tested using the concept of a Nash equilibrium to identify potential strategies that are robust to uncertain market fluctuations (e.g: uncertainty in airline demand, airframe requirements and competitor positioning). A first/second-mover advantage parameter is used as a scenario dial to adjust market rewards and firms' payoffs. The methodology is applied to a commercial aircraft engine selection study where engine firms must select an optimal engine project for development. An engine modeling and simulation framework is developed to generate a broad engine project portfolio. The creation of a customer value model enables designers to incorporate airline operation characteristics into the engine modeling and simulation process to improve the accuracy of engine/customer matching. Summary. Several key findings are made that provide recommendations on project selection strategies for firms uncertain as to when they will enter the market. The proposed study demonstrates that within a technical design environment, a rational and analytical means of modeling project development strategies is beneficial in high market risk situations.

ECUT: Energy Conversion and Utilization Technologies program. Biocatalysis project

NASA Technical Reports Server (NTRS)

1990-01-01

The Biocatalysis Project is a mission-oriented, applied research and exploratory development activity directed toward resolution of the major generic technical barriers that impede the development of biologically catalyzed commercial chemical production. The approach toward achieving project objectives involves an integrated participation of Universities, Industrial Companies and Government Research Laboratories. The Project's technical activities were organized into three work elements: molecular modeling and applied genetics; bioprocess engineering; and bioprocess design and assessment.

Use Of Lasers In Seam Welding Of Engine Parts For Cars

NASA Astrophysics Data System (ADS)

Luttke, A.

1986-11-01

The decision in favour of active research into laser technology was taken in our company in 1978. In the following years we started with the setting-up of a laser laboratory charged with the task of performing basic manufacturing technology experiments in order to examine the ap-plications of laser technology for cutting, welding, hardening, remelting and secondary alloys. The first laboratory-laser - a 2,5 kW fast axial flow CO2 laser - is connected with a CNC-controlled workpiece manipulation unit, which is designed in such a way that workpieces from the smallest component of a car gearbox up to crankcases for commercial vehicles can be manipulated at speeds considered theoretically feasible for laser machining. The use of the laser beam for cutting, hardening and welding tasks has been under investigation in our company, in this laboratory for some 6 years. Laser cutting is now no longer a question of development, but is instead standard practice and is already used in various sec-tions of our production division for pilot-series manufacturing and for small batches. Laser hardening has, in our opinion, great possibilities for tasks which, for distortion and accessibility reasons, cannot be satisfactorily performed using present-day processes, for instance induction hardening. However, a great deal of development work is still necessary before economically reasonable and quality-assured production installation can be undertaken. Laser-welding is now used in series-production in our company for two engine components. More details are given below.

A simple approach to industrial laser safety.

PubMed

Lewandowski, Michael A; Hinz, Michael W

2005-02-01

Industrial applications of lasers include marking, welding, cutting, and other material processing. Lasers used in these ways have significant power output but are generally designed to limit operator exposure to direct or scattered laser radiation to harmless levels in order to meet the Federal Laser Product Performance Standard (21CFR1040) for Class 1 laser products. Interesting challenges occur when companies integrate high power lasers into manufacturing or process control equipment. A significant part of the integration process is developing engineering and administrative controls to produce an acceptable level of laser safety while balancing production, maintenance, and service requirements. 3M Company uses a large number of high power lasers in numerous manufacturing processes. Whether the laser is purchased as a Class 1 laser product or whether it is purchased as a Class 4 laser and then integrated into a manufacturing application, 3M Company has developed an industrial laser safety program that maintains a high degree of laser safety while facilitating the rapid and economical integration of laser technology into the manufacturing workplace. This laser safety program is based on the requirements and recommendations contained in the American National Standard for Safe Use of Lasers, ANSI Z136.1. The fundamental components of the 3M program include hazard evaluation, engineering, administrative, and procedural controls, protective equipment, signs and labels, training, and re-evaluation upon change. This program is implemented in manufacturing facilities and has resulted in an excellent history of laser safety and an effective and efficient use of laser safety resources.

9. DETAIL OF UNITEDTOD TWINTANDEM STEAM ENGINE, SHOWING HIGHPRESSURE CYLINDER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. DETAIL OF UNITED-TOD TWIN-TANDEM STEAM ENGINE, SHOWING HIGH-PRESSURE CYLINDER AND EXTENSION OF HOUSING. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

Innovation through developing consumers communities. Part II: Digitalizing the innovation processes

NASA Astrophysics Data System (ADS)

Avasilcai, S.; Galateanu (Avram, E.

2015-11-01

The current research recognises the concept of innovation as the main driver for organisational growth and profitability. The companies seek to develop new ways to engage consumers and customers into co - creation value through the product design, development and distribution processes. However the main concern is manifested for new and creative ways of customization products based on consumers’ requirements and needs. Thus the need for innovative virtual instruments arose as the demand from social communities for personalised products or services increased. Basically companies should develop own innovative platforms, where consumers can participate, with ideas, concepts or other relevant contributions, and interact with designers or engineers for product development. This paper aims to present the most important features of platform development within BMW Group as a concept and as innovative instrument. From this point of view it is important to enhance past experiences of the company in the field of co - creation projects. There will be highlighted the dual consumers’ character as co - creator and co - evaluator based on their involvement in the proposed and developed projects and platform structure. The significant impact on platform functioning it has the diversity of company's concerns for Research & Development and innovation activities. From this point of view there will be assessed the platform structure, the main proposed themes and the evaluation process. The main outcome is to highlight the significance of platform development as innovative tool for consumers’ communities’ enhancement. Based on the analysis of “BMW Co-Creation Lab”, there will be revealed the main consumers concerns in terms of safety, comfort and appearance of the products. Thus it is important to understand the evaluation process of gathered ideas and intellectual property policy. The importance of platform development and implementation will be highlighted by company's results in terms of Research & Development investments and future projects which will be proposed, assessed and implemented by BMW Group in order to show the responsibility for their products and consumers.

Cost effective management of space venture risks

NASA Technical Reports Server (NTRS)

Giuntini, Ronald E.; Storm, Richard E.

1986-01-01

The development of a model for the cost-effective management of space venture risks is discussed. The risk assessment and control program of insurance companies is examined. A simplified system development cycle which consists of a conceptual design phase, a preliminary design phase, a final design phase, a construction phase, and a system operations and maintenance phase is described. The model incorporates insurance safety risk methods and reliability engineering, and testing practices used in the development of large aerospace and defense systems.

Component Provider’s and Tool Developer’s Handbook. Central Archive for Reusable Defense Software (CARDS)

DTIC Science & Technology

1994-03-25

metrics [DISA93b]. " The Software Engineering Institute (SET) has developed a domain analysis process (Feature-Oriented Domain Analysis - FODA ) and is...and expresses the range of variability of these decisions. 3.2.2.3 Feature Oriented Domain Analysis Feature Oriented Domain Analysis ( FODA ) is a domain...documents created in this phase. From a purely profit-oriented business point of view, a company may develop its own analysis of a government or commercial

75 FR 34170 - Chrysler Group LLC, Formally Known as Chrysler LLC, Kenosha Engine Plant, Including On-Site...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-16

... automobile engines. The company reports that workers leased from Caravan Knight Facilities Management, LLC..., Formally Known as Chrysler LLC, Kenosha Engine Plant, Including On-Site Leased Workers From Caravan Knight..., Kenosha Engine Plant, Kenosha, Wisconsin. The notice was published in [[Page 34171

46 CFR 13.505 - Proof of service for tankerman-engineer endorsement.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 1 2014-10-01 2014-10-01 false Proof of service for tankerman-engineer endorsement. 13... SEAMEN CERTIFICATION OF TANKERMEN Requirements for Tankerman-Engineer Endorsement § 13.505 Proof of service for tankerman-engineer endorsement. (a) Service must be proved by a letter on company letterhead...

Documenting the Engineering Design Process

ERIC Educational Resources Information Center

Hollers, Brent

2017-01-01

Documentation of ideas and the engineering design process is a critical, daily component of a professional engineer's job. While patent protection is often cited as the primary rationale for documentation, it can also benefit the engineer, the team, company, and stakeholders through creating a more rigorously designed and purposeful solution.…

Nuclear Magnetic Resonance Used to Quantify the Effect of Pyrolysis Conditions on the Oxidative Stability of Silicon Oxycarbide Ceramics

NASA Technical Reports Server (NTRS)

1996-01-01

This work was undertaken in support of the Low Cost Ceramic Composite Virtual Company, (LC^3), whose members include Northrop Grumman Corporation, AlliedSignal Inc., and Allison Advanced Development Company. LC^3 is a cost-shared effort funded by the Advanced Research Projects Agency (ARPA) and the LC^3 participants to develop a low-cost fabrication methodology for manufacturing ceramic matrix composite structural components. The program, which is being administered by the U.S. Air Force Wright Laboratory Materials Directorate, is focused on demonstrating a ceramic matrix composite turbine seal for a regional aircraft engine. This part is to be fabricated by resin transfer molding of a siloxane polymer into a fiber preform that will be transformed into a ceramic by pyrolytic conversion.

GSFC Technical Outreach: The Capitol College Model

NASA Technical Reports Server (NTRS)

Marius, Julio L.; Wagner, David

2008-01-01

In February 2005, as part of the National Aeronautic and Space Administration (NASA) Technical Outreach Program, Goddard Space Flight Center (GSFC) awarded Capitol College of Laurel, Maryland an Educational Grant to establish a Space Operation academic curriculum to meet the future needs of mission operations engineers. This was in part due to the aerospace industry and GSFC concerns that a large number of professional engineers are projected to retire in the near term with evidence showing that current enrollment in engineering schools will not produce sufficient number of space operation trained engineers that will meet industry and government demands. Capitol College, under the agreement of the Educational Grant, established the Space Operations Institute (SOI) with a new curriculum in Space Operations that was approved and certified by the State of Maryland. The SO1 programs focuses on attracting, recruiting, and training a pipeline of highly qualified engineers with experience in mission operations, system engineering and development. The selected students are integrated as members of the engineering support team in any of the missions supported by the institute. The students are mentored by professional engineers from several aerospace companies that support GSFC. Initially, the institute was involved in providing console engineers and mission planning trainees for the Upper Atmosphere Research Satellite (UARS), the Earth Radiation Budget Satellite (ERBS) and the Total Ozone Mapping Spectrometer mission (TOMS). Subsequently, the students were also involved in the technology refresh of the TOMS ground system and other mission operations development. Further mission assignment by GSFC management included participation in the Tropical Rainfall Measuring Mission (TRMM) mission operations and ground system technology refresh. The SOI program has been very successful. Since October 2005, sixty-four students have been enrolled in the SOI program and twenty-five have already graduated from the program, nineteen of whom are employed by company's supporting GSFC. Due to the success of the program, the initial grant period was extended for another period of two years. This paper presents the process that established the SOI as a viable pipeline of mission operations engineers, the lessons learned in the process of dealing with grants, and experience gained in mentoring engineering students that are responsible for particular areas of expertise and functionality. This paper can also be considered a case study and model for integrating a student team with government and industry professionals in the real world of mission operations.

Outbrief - Long Life Rocket Engine Panel

NASA Technical Reports Server (NTRS)

Quinn, Jason Eugene

2004-01-01

This white paper is an overview of the JANNAF Long Life Rocket Engine (LLRE) Panel results from the last several years of activity. The LLRE Panel has met over the last several years in order to develop an approach for the development of long life rocket engines. Membership for this panel was drawn from a diverse set of the groups currently working on rocket engines (Le. government labs, both large and small companies and university members). The LLRE Panel was formed in order to determine the best way to enable the design of rocket engine systems that have life capability greater than 500 cycles while meeting or exceeding current performance levels (Specific Impulse and Thrust/Weight) with a 1/1,OOO,OOO likelihood of vehicle loss due to rocket system failure. After several meetings and much independent work the panel reached a consensus opinion that the primary issues preventing LLRE are a lack of: physics based life prediction, combined loads prediction, understanding of material microphysics, cost effective system level testing. and the inclusion of fabrication process effects into physics based models. With the expected level of funding devoted to LLRE development, the panel recommended that fundamental research efforts focused on these five areas be emphasized.

Common Analysis Tool Being Developed for Aeropropulsion: The National Cycle Program Within the Numerical Propulsion System Simulation Environment

NASA Technical Reports Server (NTRS)

Follen, Gregory J.; Naiman, Cynthia G.

1999-01-01

The NASA Lewis Research Center is developing an environment for analyzing and designing aircraft engines-the Numerical Propulsion System Simulation (NPSS). NPSS will integrate multiple disciplines, such as aerodynamics, structure, and heat transfer, and will make use of numerical "zooming" on component codes. Zooming is the coupling of analyses at various levels of detail. NPSS uses the latest computing and communication technologies to capture complex physical processes in a timely, cost-effective manner. The vision of NPSS is to create a "numerical test cell" enabling full engine simulations overnight on cost-effective computing platforms. Through the NASA/Industry Cooperative Effort agreement, NASA Lewis and industry partners are developing a new engine simulation called the National Cycle Program (NCP). NCP, which is the first step toward NPSS and is its initial framework, supports the aerothermodynamic system simulation process for the full life cycle of an engine. U.S. aircraft and airframe companies recognize NCP as the future industry standard common analysis tool for aeropropulsion system modeling. The estimated potential payoff for NCP is a $50 million/yr savings to industry through improved engineering productivity.

78 FR 37958 - Special Conditions: Cessna Aircraft Company, Model J182T; Electronic Engine Control System...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-25

...; Electronic Engine Control System Installation AGENCY: Federal Aviation Administration (FAA), DOT. ACTION... feature(s) associated with the installation of an electronic engine control. The applicable airworthiness...) Engines, Inc. SR305-230E-C1 which is a four-stroke, air cooled, diesel cycle engine that uses turbine (jet...

15. MAP OF ALAMEDA SHIPYARD SHOWING PROPOSED ADDITIONAL FACILITIES. United ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. MAP OF ALAMEDA SHIPYARD SHOWING PROPOSED ADDITIONAL FACILITIES. United Engineering Company Ltd., Alameda Shipyard. A site map with all existing structures keyed to an identification legend. Also shows proposed new structures. No architect noted. Drawn by "J.B.H." (John Hudspeth?). Sheet 2. Plan no. 10,528. Scale one inch to 100 feet. November 12, 1943, last revised 1/18/44. pencil on vellum - United Engineering Company Shipyard, 2900 Main Street, Alameda, Alameda County, CA

4. FLOOR PLAN AND SECTIONS, ADDITION TO POWER HOUSE. United ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. FLOOR PLAN AND SECTIONS, ADDITION TO POWER HOUSE. United Engineering Company Ltd., Alameda Shipyard. Also includes plot plan at 1 inch to 100 feet. John Hudspeth, architect, foot of Main Street, Alameda, California. Sheet 3. Plan no. 10,548. Scale 1/4 inch and h inch to the foot. April 30, 1945, last revised 6/22/45. pencil on vellum - United Engineering Company Shipyard, Boiler House, 2900 Main Street, Alameda, Alameda County, CA

Anthropometric Sizing, Fit-Testing and Evaluation of the MBU-12/P Oral-Nasal Oxygen Mask

DTIC Science & Technology

1979-08-01

Engineering Company, Sierra Madre , California, has a low profile single-unit facepiece in which a deformable silicone rubber face form is bonded to a...Churchill & Truett, 1957; Hertzberg et al., 1954). This comparison indicated that the 1967 sample was, on the average, older (2.64 years), taller (1.78...Support Special Projects Office, Wright-Patterson Air Force Base, Ohio, which, in turn, contracted with Sierra Engineering Company, Sierra Madre , California

A hydrogen-oxygen rocket engine coolant passage design program (RECOP) for fluid-cooled thrust chambers and nozzles

NASA Technical Reports Server (NTRS)

Tomsik, Thomas M.

1994-01-01

The design of coolant passages in regeneratively cooled thrust chambers is critical to the operation and safety of a rocket engine system. Designing a coolant passage is a complex thermal and hydraulic problem requiring an accurate understanding of the heat transfer between the combustion gas and the coolant. Every major rocket engine company has invested in the development of thrust chamber computer design and analysis tools; two examples are Rocketdyne's REGEN code and Aerojet's ELES program. In an effort to augment current design capabilities for government and industry, the NASA Lewis Research Center is developing a computer model to design coolant passages for advanced regeneratively cooled thrust chambers. The RECOP code incorporates state-of-the-art correlations, numerical techniques and design methods, certainly minimum requirements for generating optimum designs of future space chemical engines. A preliminary version of the RECOP model was recently completed and code validation work is in progress. This paper introduces major features of RECOP and compares the analysis to design points for the first test case engine; the Pratt & Whitney RL10A-3-3A thrust chamber.

Overview of the NCC

NASA Technical Reports Server (NTRS)

Liu, Nan-Suey

2001-01-01

A multi-disciplinary design/analysis tool for combustion systems is critical for optimizing the low-emission, high-performance combustor design process. Based on discussions between then NASA Lewis Research Center and the jet engine companies, an industry-government team was formed in early 1995 to develop the National Combustion Code (NCC), which is an integrated system of computer codes for the design and analysis of combustion systems. NCC has advanced features that address the need to meet designer's requirements such as "assured accuracy", "fast turnaround", and "acceptable cost". The NCC development team is comprised of Allison Engine Company (Allison), CFD Research Corporation (CFDRC), GE Aircraft Engines (GEAE), NASA Glenn Research Center (LeRC), and Pratt & Whitney (P&W). The "unstructured mesh" capability and "parallel computing" are fundamental features of NCC from its inception. The NCC system is composed of a set of "elements" which includes grid generator, main flow solver, turbulence module, turbulence and chemistry interaction module, chemistry module, spray module, radiation heat transfer module, data visualization module, and a post-processor for evaluating engine performance parameters. Each element may have contributions from several team members. Such a multi-source multi-element system needs to be integrated in a way that facilitates inter-module data communication, flexibility in module selection, and ease of integration. The development of the NCC beta version was essentially completed in June 1998. Technical details of the NCC elements are given in the Reference List. Elements such as the baseline flow solver, turbulence module, and the chemistry module, have been extensively validated; and their parallel performance on large-scale parallel systems has been evaluated and optimized. However the scalar PDF module and the Spray module, as well as their coupling with the baseline flow solver, were developed in a small-scale distributed computing environment. As a result, the validation of the NCC beta version as a whole was quite limited. Current effort has been focused on the validation of the integrated code and the evaluation/optimization of its overall performance on large-scale parallel systems.

The Ford Partnership for Advanced Studies: A New Case for Curriculum Integration in Technology Education

ERIC Educational Resources Information Center

Zinser, Richard; Poledink, Paul

2005-01-01

The Ford Motor Company launched a new pre-engineering curriculum for high schools in the Fall of 2004. Building on an earlier manufacturing program, the development process for the Ford Partnership for Advanced Studies took approximately three years. Ford and the course designers wanted the new program to incorporate the best principles and…

Rapid Sediment Characterization Tools

DTIC Science & Technology

2008-09-01

sensitive to organic and inorganic toxicants as mysid shrimp, silverside fish, chain diatoms, and sea urchins . The data from the bioassay can be...correlated with more conventional toxicity tests, such as amphipod and sea urchin development [17], [23]. The QwikLite Testing System™ can be used for...7 Barajas and Associates with Tetra Tech, op. cit. 8 Battelle, SEA Engineering and Neptune and Company. 2005

Alternative Fuels Data Center: ampCNG Puts Conventional Fuels Out to

Science.gov Websites

; Steve Josephs, co-founder and director of engineering at ampCNG, Chicago, Illinois When ampCNG isn't the process. ampCNG's Cow-Powered Trucks ampCNG, a CNG station developer based in Chicago, Illinois interest in using more sustainable forms of fuel began in 2010, when the company partnered with Fair Oaks

Turbomachine Sealing and Secondary Flows - Part 3. Part 3; Review of Power-Stream Support, Unsteady Flow Systems, Seal and Disk Cavity Flows, Engine Externals, and Life and Reliability Issues

NASA Technical Reports Server (NTRS)

Hendricks, R. C.; Steinetz, B. M.; Zaretsky, E. V.; Athavale, M. M.; Przekwas, A. J.

2004-01-01

The issues and components supporting the engine power stream are reviewed. It is essential that companies pay close attention to engine sealing issues, particularly on the high-pressure spool or high-pressure pumps. Small changes in these systems are reflected throughout the entire engine. Although cavity, platform, and tip sealing are complex and have a significant effect on component and engine performance, computational tools (e.g., NASA-developed INDSEAL, SCISEAL, and ADPAC) are available to help guide the designer and the experimenter. Gas turbine engine and rocket engine externals must all function efficiently with a high degree of reliability in order for the engine to run but often receive little attention until they malfunction. Within the open literature statistically significant data for critical engine components are virtually nonexistent; the classic approach is deterministic. Studies show that variations with loading can have a significant effect on component performance and life. Without validation data they are just studies. These variations and deficits in statistical databases require immediate attention.

Stirling engine design manual

NASA Technical Reports Server (NTRS)

Martini, W. R.

1978-01-01

This manual is intended to serve both as an introduction to Stirling engine analysis methods and as a key to the open literature on Stirling engines. Over 800 references are listed and these are cross referenced by date of publication, author and subject. Engine analysis is treated starting from elementary principles and working through cycles analysis. Analysis methodologies are classified as first, second or third order depending upon degree of complexity and probable application; first order for preliminary engine studies, second order for performance prediction and engine optimization, and third order for detailed hardware evaluation and engine research. A few comparisons between theory and experiment are made. A second order design procedure is documented step by step with calculation sheets and a worked out example to follow. Current high power engines are briefly described and a directory of companies and individuals who are active in Stirling engine development is included. Much remains to be done. Some of the more complicated and potentially very useful design procedures are now only referred to. Future support will enable a more thorough job of comparing all available design procedures against experimental data which should soon be available.

Vers l'elimination des dessins d'ingenierie des processus de modification d'ingenierie en aeronautique

NASA Astrophysics Data System (ADS)

Quintana, Virgilio

For many years, 3D models and 2D drawings have been the main basic elements that together form and carry a product's definition throughout its lifecycle. With the advent of the Digital Product Definition trend, the Aerospace and Automotive industries have been very interested in adopting a Model-based Definition (MBD) approach that promises reduced time-to-market and improved product quality. Its main purpose is to improve and accelerate the design, manufacturing and inspection processes by integrating drawing annotations directly onto a 3D model, thereby minimizing the need to generate engineering drawings. Even though CAD tools and international standards support the MBD concept, its implementation throughout the whole product lifecycle has not yet been fully adopted; traditional engineering drawings still play an essential part in the capture and distribution of non-geometric data (tolerances, notes, etc.), in the long-term storage of product definitions, as well as in the management of engineering changes. This is especially so within the Engineering Change Management (ECM) process, which involves the study, review, annotation, validation, approval and release of engineering drawings. The exploration of alternatives to reengineer the ECM process in the absence of drawings is therefore a necessary step before the MBD approach can be broadly accepted. The objective of this research project was to propose a solution to conduct the ECM process in a drawing-less environment and to quantify its potential gains. Two Canadian aerospace companies participated in this project. First, the main barriers to be overcome in order to fully implement the MBD initiative were identified. Our observations were based on forty-one interviews conducted within the Engineering, Drafting, Configuration Management, Airworthiness, Certification, Manufacturing, Inspection and Knowledge Management departments from the two participating companies. The results indicated that there is a need to define how the Product Definition will be carried in this drawing-less environment while supporting all of the downstream users' specific requirements. Next, a solution to conduct an MBD-driven Engineering Change Management Process (ECM) was developed and evaluated based on the process requirements from both companies. The solution consists of the definition of a dataset composed of the MBD model (generated by the CAD system) and a lightweight distribution file (generated and exploited by the visualization application). The ECM process was then reengineered to support its execution when working with MBD datasets. Finally, the gains from administering the MBD-driven ECM process were determined using empirical and experimental data within a discrete-event simulation approach. Based on a case study conducted in a Canadian aerospace company, our results show that a reduction of about 11% can be achieved in both the average overall processing time and in the average cost.

Middle East respiratory syndrome: obstacles and prospects for vaccine development

PubMed Central

Papaneri, Amy B.; Johnson, Reed F.; Wada, Jiro; Bollinger, Laura; Jahrling, Peter B.; Kuhn, Jens H.

2016-01-01

Summary The recent emergence of Middle East respiratory syndrome (MERS) highlights the need to engineer new methods for expediting vaccine development against emerging diseases. However, several obstacles prevent pursuit of a licensable MERS vaccine. First, the lack of a suitable animal model for MERS complicates in vivo testing of candidate vaccines. Second, due to the low number of MERS cases, pharmaceutical companies have little incentive to pursue MERS vaccine production as the costs of clinical trials are high. In addition, the timeline from bench research to approved vaccine use is 10 years or longer. Using novel methods and cost-saving strategies, genetically engineered vaccines can be produced quickly and cost-effectively. Along with progress in MERS animal model development, these obstacles can be circumvented or at least mitigated. PMID:25864502

Rocketdyne RBCC Engine Concept Development

NASA Technical Reports Server (NTRS)

Ratckin, G.; Goldman, A.; Ortwerth, P.; Weisberg, S.

1999-01-01

Boeing Rocketdyne is pursuing the development of Rocket Based Combined Cycle (RBCC), propulsion systems as demonstrated by significant contract work in the hypersonic arena (ART, NASP, SCT, system studies) and over 12 years of steady company discretionary investment. The Rocketdyne concept is a fixed geometry integrated rocket, ramjet, scramjet which is hydrogen fueled and uses hydrogen regenerative cooling. The baseline engine structural configuration uses an integral structure that eliminates panel seals. seal purge gas, and closeout side attachments. Rocketdyne's experimental RBCC engine (Engine A5) was constructed under contract with the NASA Marshall Space Flight Center. Engine A5 models the complete flight engine flowpath consisting of an inlet, isolator, airbreathing combustor and nozzle. High performance rocket thrusters are integrated into the engine to enable both air-augmented rocket (AAR) and pure rocket operation. Engine A5 was tested in CASL's new FAST facility as an air-augmented rocket, a ramjet and a pure rocket. Measured performance demonstrated vision vehicle performance levels for Mach 3 AAR operation and ramjet operation from Mach 3 to 4. Rocket mode performance was above predictions. For the first time. testing also demonstrated transition from AAR operation to ramjet operation. This baseline configuration has also been shown, in previous testing, to perform well in the scramjet mode.

15. INTERIOR OF ENGINE ROOM, CONTAINING MESTACORLISS CROSSCOMPOUND ENGINE, FOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. INTERIOR OF ENGINE ROOM, CONTAINING MESTA-CORLISS CROSS-COMPOUND ENGINE, FOR 40" BLOOMING MILL. THIS VIEW IS TAKEN FROM THE HIGH-PRESSURE SIDE OF THE ENGINE SHOWING THE HOUSING EXTENSION; TO THE RIGHT, IN THE BACKGROUND, IS THE 24' CAST-IRON FLYWHEEL. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

The offshore petroleum industry: The formative years, 1945-1962

NASA Astrophysics Data System (ADS)

Kreidler, Tai Deckner

1997-12-01

This dissertation is the first to examine the offshore oil industry that was born in the calm waters of the Gulf of Mexico. It describes the industry's origins and tracks its development as a consequence of a search for new oil frontiers. In addition, it elaborates how the oil industry moved into the marine province using available technology, and was driven by the economic urgency to compete and develop new territories. Enterprising drilling contractors and operators seized the offshore gamble, finding it possible to lower the economic and technological threshold by drawing directly from wartime research and surplus equipment. Though large oil companies had placed its indelible stamp upon the industry, the smaller, independent oil operators set the pace of early offshore development. As a technological frontier, offshore development depended upon creative and unconventional engineering. Unfamiliar marine conditions tested the imagination of oil industry engineering. The unorthodox methods of John Hayward of Barnsdall Oil and R. G. LeTourneau of LeTourneau, Inc. among others transformed the industry by blending petroleum and marine engineering. Grappling with alien marine conditions and lacking formal training, Hayward and LeTourneau merged a century of practical oil field knowledge and petroleum engineering with 2,000 years of shipbuilding experience. The Gulf of Mexico served as a fertile and protective environment for the development of a fledgling industry. With calm waters, lacking the tempestuous and stormy character of the Atlantic Ocean, with a gradual sea-floor slope and saturated with the highly productive salt dome reservoirs, the Gulf became the birth place of the modern offshore oil industry. Within its protective sphere, companies experimented and developed various technical and business adaptations. Operators used technology and business strategies that increased the opportunity for success. In addition, regional academic research institutes arose as a response to increasing work done for the offshore industry. Academic areas that developed included oceanography, physical oceanography, marine biology, marine geology, meteorology, and weather forecasting, During the formative era that ended in the late 1950s the industry had formed its technological and economic foundation in the Gulf, and stood poised to seize the initiative in the North Sea, the Middle East, the Far East, and Indonesia.

Cigarette company trade secrets are not secret: an analysis of reverse engineering reports in internal tobacco industry documents released as a result of litigation

PubMed Central

Velicer, Clayton; Lempert, Lauren K; Glantz, Stanton

2014-01-01

Objectives Use previously secret tobacco industry documents to assess tobacco companies’ routine claims of trade secret protection for information on cigarette ingredients, additives and construction made to regulatory agencies, as well as the companies’ refusal to publicly disclose this information. Methods We analysed previously secret tobacco industry documents available at (http://legacy.library.ucsf.edu) to identify 100 examples of seven major tobacco companies’ reverse engineering of their competitors’ brands between 1937 and 2001. Results These reverse engineering reports contain detailed data for 142 different measurements for at least two companies, including physical parameters of the cigarettes, tobacco types, humectants, additives, flavourings, and smoke constituents of competitors’ cigarettes. These 100 documents were distributed to 564 employees, including top managers in domestic and foreign offices across multiple departments, including executive leadership, research and design, product development, marketing and legal. These documents reported new competitors’ products, measured ingredient changes over time, and informed companies’ decisions regarding ingredients in their own products. Conclusions Because cigarette companies routinely analyse their competitors’ cigarettes in great detail, this information is neither secret nor commercially valuable and, thus, does not meet the legal definition of a ‘trade secret.’ This information is only being kept ‘secret’ from the people consuming cigarettes and the scientific community. Public agencies should release this detailed information because it would provide valuable information about how ingredients affect addictiveness and toxicity, and would help the public health community and consumers better understand the impact of cigarette design on human health. PMID:24920577

Chemical Work Force Drops Steeply in 1985.

ERIC Educational Resources Information Center

Chemical and Engineering News, 1986

1986-01-01

Provides data on industrial employment in the chemical industry, comparing subgroups of production for all employees and for scientists and engineers. Gives company by company sales per employee breakdown. Compares wages among industry subgroups. Cites productivity measures. (JM)

Study of optical techniques for the Ames unitary wind tunnels. Part 3: Angle of attack

NASA Technical Reports Server (NTRS)

Lee, George

1992-01-01

A review of optical sensors that are capable of accurate angle of attack measurements in wind tunnels was conducted. These include sensors being used or being developed at NASA Ames and Langley Research Centers, Boeing Airplane Company, McDonald Aircraft Company, Arnold Engineering Development Center, National Aerospace Laboratory of the Netherlands, National Research Council of Canada, and the Royal Aircraft Establishment of England. Some commercial sensors that may be applicable to accurate angle measurements were also reviewed. It was found that the optical sensor systems were based on interferometers, polarized light detector, linear or area photodiode cameras, position sensing photodetectors, and laser scanners. Several of the optical sensors can meet the requirements of the Ames Unitary Plan Wind Tunnel. Two of these, the Boeing interferometer and the Complere lateral effect photodiode sensors are being developed for the Ames Unitary Plan Wind Tunnel.

Virtually Out of This World!

NASA Technical Reports Server (NTRS)

2002-01-01

Ames Research Center granted Reality Capture Technologies (RCT), Inc., a license to further develop NASA's Mars Map software platform. The company incorporated NASA#s innovation into software that uses the Virtual Plant Model (VPM)(TM) to structure, modify, and implement the construction sites of industrial facilities, as well as develop, validate, and train operators on procedures. The VPM orchestrates the exchange of information between engineering, production, and business transaction systems. This enables users to simulate, control, and optimize work processes while increasing the reliability of critical business decisions. Engineers can complete the construction process and test various aspects of it in virtual reality before building the actual structure. With virtual access to and simulation of the construction site, project personnel can manage, access control, and respond to changes on complex constructions more effectively. Engineers can also create operating procedures, training, and documentation. Virtual Plant Model(TM) is a trademark of Reality Capture Technologies, Inc.

77 FR 33560 - Eastern Maine Railway Company-Trackage Rights Exemption-Woodland Rail, LLC

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-06

... the Line within the United States. The end points of the Line are at engineering station 64+17 in Baileyville and engineering station 6978+84 in Calais, in Washington County, Me. The transaction includes a spur track between Woodland Junction, Me., which is engineering station 363+45, and engineering station...

HCCI Combustion Engines Final Report CRADA No. TC02032.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aceves, S.; Lyford-Pike, E.

This was a collaborative effort between Lawrence Livermore National Security, LLC (formerly The Regents of the University of California)/Lawrence Livermore National Laboratory (LLNL) and Cummins Engine Company (Cwnmins), to advance the state of the art on HomogeneousCharge Compression-Ignition (HCCI) engines, resulting in a clean, high-efficiency alternative to diesel engines.

75 FR 5147 - Global Engine Manufacturing Alliance a Subsidiary of the Chrysler Group LLC Including On-Site...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-01

... engaged in the production of 4-cylinder engines for automobiles. The company reports that on-site leased... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-71,581] Global Engine... Adjustment Assistance on September 22, 2009, applicable to workers of Global Engine Manufacturing Alliance, a...

Concentrating Solar Power Projects - Dahan Power Plant | Concentrating

Science.gov Websites

Plant Country: China Location: Beijing Owner(s): Institute of Electrical Engineering of Chinese Academy Electricity Generation: 1,950 MWh/yr Contact(s): Fengli Du Company: Institute of Electrical Engineering of Electrical Engineering of Chinese Academy of Sciences Owner(s) (%): Institute of Electrical Engineering of

Evolution of seismic risk management for insurance over the past 30 years

NASA Astrophysics Data System (ADS)

Shah, Haresh C.; Dong, Weimin; Stojanovski, Pane; Chen, Alex

2018-01-01

During the past 30 years, there has been spectacular growth in the use of risk analysis and risk management tools developed by engineers in the financial and insurance sectors. The insurance, the reinsurance, and the investment banking sectors have enthusiastically adopted loss estimation tools developed by engineers in developing their business strategies and for managing their financial risks. As a result, insurance/reinsurance strategy has evolved as a major risk mitigation tool in managing catastrophe risk at the individual, corporate, and government level. This is particularly true in developed countries such as US, Western Europe, and Japan. Unfortunately, it has not received the needed attention in developing countries, where such a strategy for risk management is most needed. Fortunately, in the last five years, there has been excellent focus in developing "InsurTech" tools to address the much needed "Insurance for the Masses", especially for the Asian Markets. In the earlier years of catastrophe model development, risk analysts were mainly concerned with risk reduction options through engineering strategies, and relatively little attention was given to financial and economic strategies. Such state-of-affairs still exists in many developing countries. The new developments in the science and technologies of loss estimation due to natural catastrophes have made it possible for financial sectors to model their business strategies such as peril and geographic diversification, premium calculations, reserve strategies, reinsurance contracts, and other underwriting tools. These developments have not only changed the way in which financial sectors assess and manage their risks, but have also changed the domain of opportunities for engineers and scientists. This paper will address the issues related to developing insurance/reinsurance strategies to mitigate catastrophe risks and describe the role catastrophe risk insurance and reinsurance has played in managing financial risk due to natural catastrophes. Historical losses and the share of those losses covered by insurance will be presented. How such risk sharing can help the nation share the burden of losses between tax paying public, the "at risk" property owners, the insurers and the reinsurers will be discussed. The paper will summarize the tools that are used by the insurance and reinsurance companies for estimating their future losses due to catastrophic natural events. The paper will also show how the results of loss estimation technologies developed by engineers are communicated to the business flow of insurance/reinsurance companies. Finally, to make it possible to grow "Insurance for the Masses-IFM", the role played by parametric insurance products and InsurTech tools will be discussed.

Test Results of the RS-44 Integrated Component Evaluator Liquid Oxygen/Hydrogen Rocket Engine

NASA Technical Reports Server (NTRS)

Sutton, R. F.; Lariviere, B. W.

1993-01-01

An advanced LOX/LH2 expander cycle rocket engine, producing 15,000 lbf thrust for Orbital Transfer Vehicle missions, was tested to determine ignition, transition, and main stage characteristics. Detail design and fabrication of the pump fed RS44 integrated component evaluator (ICE) was accomplished using company discretionary resources and was tested under this contracted effort. Successful demonstrations were completed to about the 50 percent fuel turbopump power level (87,000 RPM), but during this last test, a high pressure fuel turbopump (HPFTP) bearing failed curtailing the test program. No other hardware were affected by the HPFTP premature shutdown. The ICE operations matched well with the predicted start transient simulations. The tests demonstrated the feasibility of a high performance advanced expander cycle engine. All engine components operated nominally, except for the HPFTP, during the engine hot-fire tests. A failure investigation was completed using company discretionary resources.

True rewards

NASA Astrophysics Data System (ADS)

Friebele, Elaine

The National Science Board invites nominations for the 1998 NSB Public Service Award. Candidates should meet at least one of the following criteria: increased understanding of science and engineering or encouraged others to do so; promoted the engagement of scientists and engineers in public outreach and scientific literacy; helped to develop broad science and engineering policy and its support; influenced and encouraged the next generation of scientists and engineers; achieved broad recognition outside area of specialization; and fostered awareness among broad segments of the population. The award may be given to one or more individuals, to a company, corporation, or organization, but not to members of the U.S. government.The deadline for nominations is July 31, 1997. Nominations must be accompanied by the addresses and telephone numbers of both the nominee and nominator, a summary of the nominee's activities, and the nominee's vitae (no more than three pages).

Advanced Turbine Technology Applications Project (ATTAP)

NASA Technical Reports Server (NTRS)

1993-01-01

This report is the fifth in a series of Annual Technical Summary Reports for the Advanced Turbine Technology Applications Project (ATTAP), sponsored by the U.S. Department of Energy (DOE). The report was prepared by Garrett Auxiliary Power Division (GAPD), a unit of Allied-Signal Aerospace Company, a unit of Allied Signal, Inc. The report includes information provided by Garrett Ceramic Components, and the Norton Advanced Ceramics Company, (formerly Norton/TRW Ceramics), subcontractors to GAPD on the ATTAP. This report covers plans and progress on ceramics development for commercial automotive applications over the period 1 Jan. through 31 Dec. 1992. Project effort conducted under this contract is part of the DOE Gas Turbine Highway Vehicle System program. This program is directed to provide the U.S. automotive industry the high-risk, long-range technology necessary to produce gas turbine engines for automobiles with reduced fuel consumption, reduced environmental impact, and a decreased reliance on scarce materials and resources. The program is oriented toward developing the high-risk technology of ceramic structural component design and fabrication, such that industry can carry this technology forward to production in the 1990's. The ATTAP test bed engine, carried over from the previous AGT101 project, is being used for verification testing of the durability of next generation ceramic components, and their suitability for service at Reference Powertrain Design conditions. This document reports the technical effort conducted by GAPD and the ATTAP subcontractors during the fifth year of the project. Topics covered include ceramic processing definition and refinement, design improvements to the ATTAP test bed engine and test rigs, and the methodology development of ceramic impact and fracture mechanisms. Appendices include reports by ATTAP subcontractors in the development of silicon nitride materials and processes.

National Program for Inspection of Non-Federal Dams. Knox Mill Dam (ME 00276), Megunticook River Basin, Camden, Maine. Phase I Inspection Report.

DTIC Science & Technology

1978-08-01

been furnished the owner, Camden Water & Power Co., 33 Mechanic Street, ..... a ine 0,-43. Co-ies of this report will be made available to the public...gn Branch Engineering Division SAUL CO ER, Member Chief, Water Control Branch Engineering Division APPROVAL RECOMMENDED: JOE B. FRYAR Chief...Camden Water & Power Co. 33 Mechanic Street Camden, Maine 04843 Tne Camden Water and Power Company is an affiliate of Knox Woolen Mills Company. f

Electromagnetic Instrumentation for Exploration and the Environment: A Retrospective Look by Canada's Leading Manufacture

NASA Astrophysics Data System (ADS)

Catalano, M.

2009-05-01

Geonics Limited has a very rich and varied history. This talk will provide a historical perspective about how a few key individuals shaped the development of some of the world's most useful electromagnetic (EM) geophysical instrumentation. A brief review of these systems, including the science behind them, will showcase the evolution of each to the market place and emphasize how a combination of business savvy and a constant investment to research is what lead to a successful line of instrumentation. In 1950 a company called Aeromagnetic Surveys Ltd. was established that was considered "the largest and most diversified air- survey firm in the world" (FLIGHT, 1954), for its time. It employed Vaino Ronka and Alex Herz, young engineers, who patented several new EM technologies including an in-phase and quadrature towed bird helicopter EM system (the first commercial transistorized instrument). The two also set new standards for ground based horizontal loop EM systems and won several mining Blue Ribbon Awards. By the end of 1958, Mr. Ronka began offering independent design services for geophysical instruments and it became inevitable that one day he would form his own company. Geonics Limited was incorporated in 1962 by Vaino Ronka and Alex Herz and the EM-16 VLF receiver, first sold in 1965, became the first successful instrument. It's considered the best selling electrical geophysical tool of all-time and is still sold today by the same model name 44 years later. In 1974, the company was purchased by James Duncan McNeill, the former chief engineering physicist of Barringer Research Ltd. During his time as president of Geonics he was responsible for an explosion of new instruments from the 70's, 80's and into the 90's that permanently placed Geonics instruments in virtually every government environmental lab and consulting firm active in near-surface geophysics. His ability to foresee new problem areas and to define new roles that geophysical methods could play in a solution helped established several key areas of application for Geonics instruments outside of mineral exploration. These included civil engineering, sea-ice thickness and permafrost mapping, environmental site assessment, groundwater exploration, agriculture and archaeology. It is safe to say that without him Geonics would have far fewer geophysical instruments (Kaufman, 1994). Mr. McNeill sold the company to Swedish Geological AB (SGAB), a Swedish government company which also owned ABEM in the early 90's only to purchase it back a year later with new partner Miro Bosnar the VP and chief engineer. Mr. McNeill retired soon after and Geonics has been owned by Mr. Bosnar, the current president and chief engineer, ever since. Mr. Bosnar has been with Geonics since 1968 and has arguably been the most influential person in the history of the company. He has been involved in the design, research and development of every instrument manufactured since that time and has established him self as the most experienced and respected designer of all types of EM systems in the world. From fixed-wing and helicopter towed-bird EM systems to the PROTEM ground transient EM system, ground conductivity meters and a wide variety of metal detectors that have revolutionized the search for unexploded ordnance (UXO) and improvised explosive devices (IED's). EM equipment is generally recognized as one of the most difficult to manufacture but Mr. Bosnar continues to maintain customer loyalty through a strong commitment to research and development and high-quality instruments, including well over 50 commercial products over the last five decades, to an ever-broadening market place.

A Comparison of Lecture-Based and Challenge-Based Learning in a Workplace Setting: Course Designs, Patterns of Interactivity, and Learning Outcomes

ERIC Educational Resources Information Center

O'Mahony, Timothy K.; Vye, Nancy J.; Bransford, John D.; Sanders, Elizabeth A.; Stevens, Reed; Stephens, Richard D.; Richey, Michael C.; Lin, Kuen Y.; Soleiman, Moe K.

2012-01-01

We describe findings from a research partnership involving a global airline manufacturing company (The Boeing Company), and learning scientists and aeronautical engineers from the University of Washington. Our starting point for the partnership focused on an 8-hour introductory composites course that was designed for company employees. In phase…

Energy planning and energy efficiency assistance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Markel, L.

1995-12-31

Electrotek is an engineering services company specializing in energy-related programs. Clients are most utilities, large energy users, and the U.S. Electric Power Research Institute. Electrotek has directed energy projects for the U.S. Agency for International Development and the U.S. Department of Energy in Poland and other countries of Central Europe. The objective is to assist the host country organizations to identify and implement appropriate energy efficiency and pollution reduction technologies, to transfer technical and organizational knowledge, so that further implementations are market-driven, without needed continuing foreign investment. Electrotek has worked with the Silesian Power Distribution Company to design an energymore » efficiency program for industrial customers that has proven to be profitable for the company and for its customers. The program has both saved energy and costs, and reduced pollution. The program is expanding to include additional customers, without needing more funding from the U.S. government.« less

78 FR 28128 - Airworthiness Directives; the Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-14

...., Washington, DC 20590. FOR FURTHER INFORMATION CONTACT: Sue Lucier, Aerospace Engineer, Propulsion Branch, ANM... Lucier, Aerospace Engineer, Propulsion Branch, ANM-140S, Seattle Aircraft Certification Office, FAA, 1601...

77 FR 16432 - Airworthiness Directives; Cessna Aircraft Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-21

... CONTACT: David Fairback, Aerospace Engineer, Mechanical Systems and Propulsion Branch, ACE-116W, FAA... Fairback, Aerospace Engineer, Mechanical Systems and Propulsion Branch, ACE- 116W, FAA, Wichita Aircraft...

76 FR 82111 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-30

.... FOR FURTHER INFORMATION CONTACT: Chris Parker, Aerospace Engineer, Propulsion Branch, ANM-140S, FAA... Information For more information about this AD, contact Chris Parker, Aerospace Engineer, Propulsion Branch...

75 FR 31329 - Airworthiness Directives; The Boeing Company Model 757 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-03

... after receipt. FOR FURTHER INFORMATION CONTACT: Tak Kobayashi, Aerospace Engineer, Propulsion Branch..., Aerospace Engineer, Propulsion Branch, ANM- 140S, FAA, Seattle Aircraft Certification Office, 1601 Lind...

Engineering approaches to immunotherapy.

PubMed

Swartz, Melody A; Hirosue, Sachiko; Hubbell, Jeffrey A

2012-08-22

As the science of immunology grows increasingly mechanistic, motivation for developing quantitative, design-based engineering approaches has also evolved, both for therapeutic interventions and for elucidating immunological pathways in human disease. This has seeded the nascent field of "immunoengineering," which seeks to apply engineering analyses and design approaches to problems in translational immunology. For example, cell engineers are creating ways to tailor and use immune cells as living therapeutics; protein engineers are devising new methods of rapid antibody discovery; biomaterials scientists are guiding vaccine delivery and immune-cell activation with novel constructs; and systems immunologists are deciphering the evolution and maintenance of T and B cell receptor repertoires, which could help guide vaccine design. The field is multidisciplinary and collaborative, with engineers and immunologists working together to better understand and treat disease. We discuss the scientific progress in this young, yet rapidly evolving research area, which has yielded numerous start-up companies that are betting on impact in clinical and commercial translation in the near future.

Modular Engine Noise Component Prediction System (MCP) Program Users' Guide

NASA Technical Reports Server (NTRS)

Golub, Robert A. (Technical Monitor); Herkes, William H.; Reed, David H.

2004-01-01

This is a user's manual for Modular Engine Noise Component Prediction System (MCP). This computer code allows the user to predict turbofan engine noise estimates. The program is based on an empirical procedure that has evolved over many years at The Boeing Company. The data used to develop the procedure include both full-scale engine data and small-scale model data, and include testing done by Boeing, by the engine manufacturers, and by NASA. In order to generate a noise estimate, the user specifies the appropriate engine properties (including both geometry and performance parameters), the microphone locations, the atmospheric conditions, and certain data processing options. The version of the program described here allows the user to predict three components: inlet-radiated fan noise, aft-radiated fan noise, and jet noise. MCP predicts one-third octave band noise levels over the frequency range of 50 to 10,000 Hertz. It also calculates overall sound pressure levels and certain subjective noise metrics (e.g., perceived noise levels).

Real-Time Simulation

NASA Technical Reports Server (NTRS)

1997-01-01

Coryphaeus Software, founded in 1989 by former NASA electronic engineer Steve Lakowske, creates real-time 3D software. Designer's Workbench, the company flagship product, is a modeling and simulation tool for the development of both static and dynamic 3D databases. Other products soon followed. Activation, specifically designed for game developers, allows developers to play and test the 3D games before they commit to a target platform. Game publishers can shorten development time and prove the "playability" of the title, maximizing their chances of introducing a smash hit. Another product, EasyT, lets users create massive, realistic representation of Earth terrains that can be viewed and traversed in real time. Finally, EasyScene software control the actions among interactive objects within a virtual world. Coryphaeus products are used on Silican Graphics workstation and supercomputers to simulate real-world performance in synthetic environments. Customers include aerospace, aviation, architectural and engineering firms, game developers, and the entertainment industry.

Job Prospects for Chemical Engineers.

ERIC Educational Resources Information Center

Basta, Nicholas

1985-01-01

After several lean years, chemical engineering (a popular discipline among women) is witnessing a higher job demand for new graduates. Companies show a trend toward specialty chemicals with resultant needs for more engineering talent. Other opportunities in the field include agriculture and food processing, environmental control, biotechnology,…

AJ26 engine testing moves forward

NASA Image and Video Library

2010-07-19

Stennis employees at the E-1 Test Stand position an Aerojet AJ26 rocket engine in preparation for a series of early tests. Stennis has partnered with Orbital Sciences Corporation to test the rocket engine for the company's commercial cargo flights to the International Space Station.

11. BUILDING NO. 18 (ENGINEERING BUILDING), CENTER, IN RELATION TO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. BUILDING NO. 18 (ENGINEERING BUILDING), CENTER, IN RELATION TO BUILDING NO. 19 (BENDING SHOP AND OVEN) AT FAR LEFT, AND TO THE WET BASIN AT FAR RIGHT. VIEW TO NORTH-NORTHWEST. - United Engineering Company Shipyard, 2900 Main Street, Alameda, Alameda County, CA

The Power of Aircraft Engines at Altitude

NASA Technical Reports Server (NTRS)

Ragazzi, Paolo

1939-01-01

The subject of the present paper is confined to the investigations and methods employed by the Fiat company in their studies on the altitude performance of an air-cooled engine of the production type. The experimental set-up as well as test engine data are provided.

Governance implications of nanomaterials companies' inconsistent risk perceptions and safety practices

NASA Astrophysics Data System (ADS)

Engeman, Cassandra D.; Baumgartner, Lynn; Carr, Benjamin M.; Fish, Allison M.; Meyerhofer, John D.; Satterfield, Terre A.; Holden, Patricia A.; Harthorn, Barbara Herr

2012-03-01

Current research on the nanotechnology industry indicates its downstream expansion at a rapid pace, while toxicological research and best practices for environmental health and safety are still being developed. Companies that use and/or produce engineered nanomaterials (ENMs) have enormous potential to influence safe-handling practices for ENMs across the product life cycle. Knowledge of both industry practices and leaders' perceptions of risk is vital for understanding how companies will act to control potential environmental and health risks. This article reports results from a new international survey of nanomaterials companies in 14 countries. In this survey, company participants reported relatively high levels of uncertainty and/or perceived risk with regard to ENMs. However, these perspectives were not accompanied by expected risk-avoidant practices or preferences for regulatory oversight. A majority of companies indicated "lack of information" as a significant impediment to implementing nano-specific safety practices, but they also reported practices that were inconsistent with widely available guidance. Additionally, in the absence of safe-handling regulations, companies reported nano-specific health and safety programs that were narrow in scope. Taken together, these findings indicate that health and safety guidance is not reaching industry. While industry leaders' reluctance toward regulation might be expected, their own reported unsafe practices and recognition of possible risks suggest a more top-down approach from regulators is needed to protect workers and the environment.

20. San FranciscoOakland Bay Bridge contract recipients, April 28, 1933, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. San Francisco-Oakland Bay Bridge contract recipients, April 28, 1933, photographer unknown. Standing, left to right: Edward J. Schneider, Columbia Steel Corporation; C.C. Horton, Healy-Tibbitts Construction Company; Henry J. Kaiser, Bridge Builders, Inc.; Albert Huber, Clinton Construction Company; Allan McDonald, Transbay Construction Company; C.C. Carleton, Chief, Division of Contracts and Rights of Way, California Department of Public Works. Seated, left to right: Henry J. Brunnier, Consulting Engineer, Member of Consulting Board, San Francisco-Oakland Bay Bridge; Charles E. Andrew, Bridge Engineer, San Francisco-Oakland Bay Bridge; Earl Lee Kelly, Director, California Department of Public Works; Harrison S. Robinson, President, Financial ... - Salt River Bridge, Spanning Salt River at Dillon Road, Ferndale, Humboldt County, CA

Workplace Design

NASA Technical Reports Server (NTRS)

1984-01-01

The Anthropometric Source Book was developed based on Johnson Space Center project of anthropometry, the study of the size, shape and motion characteristics of the human body. Designed primarily for use by NASA, the military services and aerospace contractors, the book was also intended to help non-aerospace engineers, architects, and others engaged in design of clothing, equipment and workplaces. An example of its use by Eastman Kodak Company is the company's application of the data to design efficient, productive and comfortable workplaces for employees in the Rochester, NY processing laboratories. The sourcebook was used to determine such dimensions as leg space, work surface height and thickness, employee reach distances, proper height for computer terminal screen, seat height and knee space.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vanvick, T.W.

The Logan Generating Plant (formerly Keystone Cogeneration Project) is a 230 MW (gross) pulverized coal cogeneration facility located on the Delaware River in Logan Township, New Jersey, off Route 130. Owned and operated by U.S. Generating Company, the plant was built by Bechtel Corporation, which provided engineering, procurement, construction, and startup services. Power from the plant is furnished to Atlantic Electric, and approximately 50,000 pounds of process steam per hour is provided to Monsanto`s adjacent facility. U.S. Generating Company is committed to operating plants with close attention to the environment and has developed a specific Environmental Mission Statement. This papermore » addresses some of the key environmental features at the Logan Generating Plant.« less

Ducted Fan Designs Lead to Potential New Vehicles

NASA Technical Reports Server (NTRS)

2010-01-01

In 1994, aerospace engineers Rob Bulaga and Mike Moshier formed Trek Aerospace Inc., based in Folsom, California, to develop personal air vehicles using a novel ducted fan design. The company relied on Ames Research Center for a great deal of testing, the results of which have provided greater lift, lowered weight, more power, and improved maneuverability. The technology has been applied to three models: the Dragonfly UMR-1, the Springtail EFV, and the OVIWUN, a small-scale version that is for sale through the company's Web site. It is safer than a manned vehicle, and its size makes it relatively difficult for it to damage itself during test flights the way a larger mass, faster craft could.

Robotic Waterjet System

NASA Technical Reports Server (NTRS)

1996-01-01

NASA needed a way to safely strip old paint and thermal protection material from reusable components from the Space Shuttle; to meet this requirement, Marshall Space Flight Center teamed with United Technologies' USBI Company and developed a stripping system based on hydroblasting. United Technology spun off a new company, Waterjet Systems, to commercialize and market the technology. The resulting ARMS (Automated Robotic Maintenance Systems), employ waterblasts at 55,000 pounds per square inch controlled by target-sensitive robots. The systems are used on aircraft and engine parts, and the newest application is on ships, where it not only strips but catches the ensuing wastewater. This innovation results in faster, cheaper stripping with less clean-up and reduced environmental impact.

Onboard Systems Record Unique Videos of Space Missions

NASA Technical Reports Server (NTRS)

2010-01-01

Ecliptic Enterprises Corporation, headquartered in Pasadena, California, provided onboard video systems for rocket and space shuttle launches before it was tasked by Ames Research Center to craft the Data Handling Unit that would control sensor instruments onboard the Lunar Crater Observation and Sensing Satellite (LCROSS) spacecraft. The technological capabilities the company acquired on this project, as well as those gained developing a high-speed video system for monitoring the parachute deployments for the Orion Pad Abort Test Program at Dryden Flight Research Center, have enabled the company to offer high-speed and high-definition video for geosynchronous satellites and commercial space missions, providing remarkable footage that both informs engineers and inspires the imagination of the general public.

Influence of firm size on the competencies required to management engineers in the Jordanian telecommunications sector

NASA Astrophysics Data System (ADS)

Conchado Peiró, Andrea; Bas Cerdá, María del Carmen; Gharaibeh, Khaled M.; Kaylani, Hazem

2017-09-01

The objective of this study is to identify the competencies required to achieve success in the transition from higher education to the labour market based on the perceptions of employers. This paper analyses the assessments made by a group of engineering company employers. An item-battery of 20 competencies was grouped into 3 dimensions by using factor analysis. Subsequently, respondents' scores were also clustered into three groups and characterised through contingency tables. The competencies demanded by employers were grouped into business and finance, problem-solving and strategic planning. Significant differences were found between responses from employers working in medium and small companies, who placed more importance on competencies related to problem-solving and strategic planning, and employers in big companies, who were more concerned about the difficulties of finding well-trained graduates. The findings from this paper have important implications for research in the areas of higher education and organisations that usually employ graduate engineers.

Training of Ability for Engineering Design through Long Term Internship Program

NASA Astrophysics Data System (ADS)

Konishi, Masami; Gofuku, Akio; Tomita, Eiji

The education program for engineering design capabilities through long term internship of Okayama University had started in 2006. The program supported by the MEXT is aimed to educate students in the Graduate School of Natural Science and Technology of Okayama University. The internship satellite laboratory of the University is settled in the near place of collaborative companies in which students are engaged with the project themes extracted from problems in the factory of collaborative companies. Through the program, promotion of abilities for setup and solving a problem considering cost and due date together with performance of the solution. Students are also expected to gain knowledge on patent and ethics required for skillful engineers.

Development and operation of NEW-KOTIS : In-house technical information database of Nippon Kokan Corp.

NASA Astrophysics Data System (ADS)

Yagi, Yukio; Takahashi, Kaei

The purpose of this report is to describe how the activities for managing technical information has been and is now being conducted by the Engineering department of Nippon Kokan Corp. In addition, as a practical example of database generation promoted by the department, this book gives whole aspects of the NEW-KOTIS (background of its development, history, features, functional details, control and operation method, use in search operations, and so forth). The NEW-KOTIS (3rd-term system) is an "in-house technical information database system," which started its operation on May, 1987. This database system now contains approximately 65,000 information items (research reports, investigation reports, technical reports, etc.) generated within the company, and this information is available to anyone in any department through the network connecting all the company's structures.

Company Profile: Selventa, Inc.

PubMed

Fryburg, David A; Latino, Louis J; Tagliamonte, John; Kenney, Renee D; Song, Diane H; Levine, Arnold J; de Graaf, David

2012-08-01

Selventa, Inc. (MA, USA) is a biomarker discovery company that enables personalized healthcare. Originally founded as Genstruct, Inc., Selventa has undergone significant evolution from a technology-based service provider to an active partner in the development of diagnostic tests, functioning as a molecular dashboard of disease activity using a unique platform. As part of that evolution, approximately 2 years ago the company was rebranded as Selventa to reflect its new identity and mission. The contributions to biomedical research by Selventa are based on in silico, reverse-engineering methods to determine biological causality. That is, given a set of in vitro or in vivo biological observations, which biological mechanisms can explain the measured results? Facilitated by a large and carefully curated knowledge base, these in silico methods generated new insights into the mechanisms driving a disease. As Selventa's methods would enable biomarker discovery and be directly applicable to generating novel diagnostics, the scientists at Selventa have focused on the development of predictive biomarkers of response in autoimmune and oncologic diseases. Selventa is presently building a portfolio of independent, as well as partnered, biomarker projects with the intention to create diagnostic tests that predict response to therapy.

75 FR 52982 - Chrysler Group LLC, Formally Known as Chrysler LLC, Kenosha Engine Plant, Including On-Site...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-30

... automobile engines. The company reports that workers leased from Syncreon were employed on-site at the..., Formally Known as Chrysler LLC, Kenosha Engine Plant, Including On-Site Leased Workers From Caravan Knight... Chrysler, LLC, Kenosha Engine Plant, Kenosha, Wisconsin. The notice was published in the Federal Register...

Investigations on Required Core Competencies for Engineering Graduates with Reference to the Indian IT Industry

ERIC Educational Resources Information Center

Goel, Sanjay

2006-01-01

Fifty-four engineers and managers working with Indian and multinational IT companies, with an average experience of 7.5 years, have responded to a survey about engineering education. Respondents have assessed the importance of 49 parameters. Twenty-three of these parameters correspond to core engineering and general professional competencies for…

Cost Effective Repair Techniques for Turbine Airfoils. Volume 2

DTIC Science & Technology

1979-04-01

BLADES , *GUIDE VANES , *REPAIR, TURBOFAN ENGINES , DIFFUSION BONDING, COST EFFECTIVENESS Identifiers: (U) * Turbine vanes , TF-39 engines , Activated...REPAIR TECHNIQUES FOR TURBINE AIRFOILS J. A. WEIN W. R. YOUNG GENERAL ELECTRIC COMPANY AIRCRAFT ENGINE GROUP CINCINNATI, OHIO 45215 APRIL 1979...Author: GENERAL ELECTRIC CO CINCINNATI OH AIRCRAFT ENGINE BUSINESS GROUP Unclassified Title: (U) Cost Effective Repair Techniques for

17. INTERIOR VIEW OF HILLMAN FAN HOUSE ENGINE ROOM LOOKING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. INTERIOR VIEW OF HILLMAN FAN HOUSE ENGINE ROOM LOOKING EAST The direct-acting 1883 Pittston Engine and Machine Company steam engine was made by George A. Parrish and W. B. Culver of West Pittston, Pennsylvania. - Dorrance Colliery Fan Complex, South side of Susquehanna River at Route 115 & Riechard Street, Wilkes-Barre, Luzerne County, PA

Learning Engineers to Reflect: Obstacles and Remedies in an Engineering Community

ERIC Educational Resources Information Center

Aase, Karina; Olsen, Odd Einar; Pedersen, Cathrine

2007-01-01

The article reports results from a research facilitated learning project carried out in an engineering department in an oil and gas company. The objective of the project was to enhance an awareness of and the ability to use, dialogue and reflection-based learning approaches. The results document that the project-based engineering setting induces…

Ionic Liquids as Novel Lubricants and /or Lubricant Additives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qu, J.; Viola, M. B.

2013-10-31

This ORNL-GM CRADA developed ionic liquids (ILs) as novel lubricants or oil additives for engine lubrication. A new group of oil-miscible ILs have been designed and synthesized with high thermal stability, non-corrosiveness, excellent wettability, and most importantly effective anti-scuffing/anti-wear and friction reduction characteristics. Mechanistic analysis attributes the superior lubricating performance of IL additives to their physical and chemical interactions with metallic surfaces. Working with a leading lubricant formulation company, the team has successfully developed a prototype low-viscosity engine oil using a phosphonium-phosphate IL as an anti-wear additive. Tribological bench tests of the IL-additized formulated oil showed 20-33% lower friction inmore » mixed and elastohydrodynamic lubrication and 38-92% lower wear in boundary lubrication when compared with commercial Mobil 1 and Mobil Clean 5W-30 engine oils. High-temperature, high load (HTHL) full-size engine tests confirmed the excellent anti-wear performance for the IL-additized engine oil. Sequence VID engine dynamometer tests demonstrated an improved fuel economy by >2% for this IL-additized engine oil benchmarked against the Mobil 1 5W-30 oil. In addition, accelerated catalyst aging tests suggest that the IL additive may potentially have less adverse impact on three-way catalysts compared to the conventional ZDDP. Follow-on research is needed for further development and optimization of IL chemistry and oil formulation to fully meet ILSAC GF-5 specifications and further enhance the automotive engine efficiency and durability.« less

6. OVERALL VIEW OF THE FRONT AND THE TOWER, LOOKING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. OVERALL VIEW OF THE FRONT AND THE TOWER, LOOKING WEST FROM THE ACTIVE PIER OF BAY SHIP AND YACHT COMPANY. COAST GUARD CUTTER SHERMAN AT RIGHT. - United Engineering Company Shipyard, Crane, 2900 Main Street, Alameda, Alameda County, CA

Advanced Turbine Technology Applications Project (ATTAP) 1993 annual report

NASA Technical Reports Server (NTRS)

1994-01-01

This report summarizes work performed by AlliedSignal Engines, a unit of AlliedSignal Aerospace Company, during calendar year 1993, toward development and demonstration of structural ceramic technology for automotive gas turbine engines. This work was performed for the U.S. Department of Energy (DOE) under National Aeronautics and Space Administration (NASA) Contract DEN3-335, Advanced Turbine Technology Applications Project (ATFAP). During 1993, the test bed used to demonstrate ceramic technology was changed from the AlliedSignal Engines/Garrett Model AGT101 regenerated gas turbine engine to the Model 331-200(CT) engine. The 331-200(CT) ceramic demonstrator is a fully-developed test platform based on the existing production AlliedSignal 331-200(ER) gas turbine auxiliary power unit (APU), and is well suited to evaluating ceramic turbine blades and nozzles. In addition, commonality of the 331-200(CT) engine with existing gas turbine APU's in commercial service provides the potential for field testing of ceramic components. The 1993 ATTAP activities emphasized design modifications of the 331-200 engine test bed to accommodate ceramic first-stage turbine nozzles and blades, fabrication of the ceramic components, ceramic component proof and rig tests, operational tests of the test bed equipped with the ceramic components, and refinement of critical ceramic design technologies.

Integral Engine Inlet Particle Separator. Volume 1. Technology Program

DTIC Science & Technology

1975-07-01

inlet particle separators for future Army aircraft gas turbine engines . Appropriate technical personnel of this Directorate have reviewed this report...USAAMRDL-TR-75-31A I - / INTEGRAL ENGINE INLET PARTICLE SEPARATOR Volume I-- Technology Program General Electric Company Aircraft Engine Group...N1 i 9ap mm tm~qu INTRODUCTION The adverse environments in which Army equipment operates impose severe )enalties upon gas turbine engine performance

Job Prospects for Industrial Engineers.

ERIC Educational Resources Information Center

Basta, Nicholas

1986-01-01

Because of the impetus on how to improve productivity in companies, the demand for graduating industrial engineers continues to be strong from a variety of sources. Starting salary offers for graduates have been averaging $26,784. Enrollments in industrial engineering programs are increasing (with 3,923 graduates in 1984). (JN)

77 FR 20848 - Notice of Lodging of Consent Decree Under the Clean Air Act

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-06

... labeled marine diesel engines in their respective operations. The Consent Decree requires Settling...-ignition engine manufacturer, and National Steel and Shipbuilding Company, a marine vessel manufacturer... Selective Catalytic Reduction emissions control technology at a marine engine test stand operated at...

Geographic Freedom

NASA Technical Reports Server (NTRS)

2000-01-01

Kennedy Space Center's need to conduct real-time monitoring of Space Shuttle operations led to the development of Netlander Inc.'s JTouch system. The technology behind JTouch allows engineers to view Space Shuttle and ground support data from any desktop computer using a web browser. Companies can make use of JTouch to better monitor locations scattered around the world, increasing decision-making speed and reducing travel costs for site visits.

Technology Transferred to the Kirby Company

NASA Technical Reports Server (NTRS)

1996-01-01

NASA Lewis Research Center's Propulsion Systems Branch, evaluated the structural and vibration characteristics of the Kirby Model G-4 fan. Modes of vibration and resonance potential were evaluated in the Holography Test Lab at Lewis. As a result of the Lewis tests and rotor structural evaluation, Kirby engineers gained new insights into their existing design, enabling them to develop a more robust fan for use in their vacuum cleaners.

Life and Utilization Criteria Identification in Design (LUCID). Volume II

DTIC Science & Technology

1981-10-01

AFWAL-.TR.412101 VOLUME Iff LIFE AND UTILIZATION CRITERIA IDENTIFICATION oIN DESIGN , VOLUME I[ SMcDonnell Aircraft Company SMcDonnell Douglas... design , a complexinteractive air- craft/engine design effort is conducted. The primary objective of the Life and Utilization Criteria Identification in... Design (LUCID) Program was to develop and demonstrate techniques which will aid in identifying, during conceptual design , balanced and consistent

14. INTERIOR OF ENGINE ROOM, CONTAINING MESTACORLISS CROSSCOMPOUND ENGINE, FOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. INTERIOR OF ENGINE ROOM, CONTAINING MESTA-CORLISS CROSS-COMPOUND ENGINE, FOR 40" BLOOMING MILL. THIS VIEW HIGHLIGHTS THE CRANK AND 24' DIAMETER FLYWHEEL. THE ENGINE IS A 7,940 HP MESTA-CORLISS CROSS-COMPOUND STEAM ENGINE ITS BORE AND STROKE ARE 32"X84"X60". NOTE FLY BALL GOVERNOR ON ENGINE. MILL DRIVE SHAFT ATTACHED TO PULLEY ON LOCATED ON CRANK. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

Study of Noise-Certification Standards for Aircraft Engines. Volume 1. Noise-Control Technology for Turbofan Engines.

DTIC Science & Technology

1983-06-01

28 2. TFE731 from Garrett Turbine Engine Company .... ............ 29 3. NASA QCGAT (Quiet, Clean General-Aviation Turbofan...engines, with as much as 3.67 for the Garrett TFE731 engine. Increasing the axial spacing between rotor and stator stages reduces turbo- machinery...envelope. Except for the TFE731 , none of the engines for business/executive jets had absorp- tive duct linings within the engine envelope. Because the

Out of the Lab...Into the Real World

NASA Technical Reports Server (NTRS)

1999-01-01

Big Sky Laser Technologies of Bozeman, MT is a developer of compact, ruggedized commercial and developmental laser systems, including small medical lasers and Lidars used in NASA tracking applications. Company engineers developing new laser products determined that NASA technology for detection and control of prelasing in a Q-switched laser would be of value to them in at least two of their product lines. Big Sky Laser's CFR-800 unit is based on NASA technology to which they obtained a non-exclusive patent.

Control Systems

NASA Technical Reports Server (NTRS)

1984-01-01

Boeing Commercial Airplane Company's Flight Control Department engineers relied on Langley developed software package known as ORACLS to develop an advanced control synthesis package for both continuous and discrete control system. Package was used by Boeing for computerized analysis of new system designs. Resulting applications include a multiple input/output control system for the terrain-following navigation equipment of the Air Forces B-1 Bomber, and another for controlling in flight changes of wing camber on an experimental airplane. ORACLS is one of 1,300 computer programs available from COSMIC.

1995 Laboratory-Directed Research and Development Annual report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cauffman, D.P.; Shoaf, D.L.; Hill, D.A.

1995-12-31

The Laboratory-Directed Research and Development Program (LDRD) is a key component of the discretionary research conducted by Lockheed Idaho Technologies Company (Lockheed Idaho) at the Idaho National Engineering Laboratory (INEL). The threefold purpose and goal of the LDRD program is to maintain the scientific and technical vitality of the INEL, respond to and support new technical opportunities, and enhance the agility and flexibility of the national laboratory and Lockheed Idaho to address the current and future missions of the Department of Energy.

40 CFR 89.1009 - What special provisions apply to branded engines?

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION... branded engines? A manufacturer identifying the name and trademark of another company on the emission...

40 CFR 89.1009 - What special provisions apply to branded engines?

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION... branded engines? A manufacturer identifying the name and trademark of another company on the emission...

40 CFR 89.1009 - What special provisions apply to branded engines?

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION... branded engines? A manufacturer identifying the name and trademark of another company on the emission...

40 CFR 89.1009 - What special provisions apply to branded engines?

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION... branded engines? A manufacturer identifying the name and trademark of another company on the emission...

How to Find Reliable ENT Info

MedlinePlus

... about your condition may be difficult. Most search engines and directories do not rank information from your ... you to buy its product paid the search engine company to list it near the top. Your ...

The growing importance of geo-scientists in the global oil field service industry

NASA Astrophysics Data System (ADS)

Schwartz, L.

2005-12-01

Schlumberger is often seen as a physics, chemistry and engineering company whose primary businesses are directional drilling, well logging, cementing, perforating and stimulation. However, in the future we see enormous potential for growth in the areas of seismic for reservoir monitoring, production services and project management. To succeed we will have to greatly strengthen our geo-technical workforce - geologists, geophysicists, drilling, reservoir and petroleum engineers. This will involve recruiting new graduates and developing their careers in addition to mid-career hiring. For the last 25 years, we have developed a culture of hiring in the countries where we work and of career development for employees of all nationalities. I will review our recruiting, training and university relations efforts and will discuss the adjustments we have made to effectively manage the growth of our geo-technical community.

75 FR 354 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-05

..., 2009. Take notice that the Commission received the following electric rate filings: Docket Numbers...: Iberdrola Renewables, Inc et al. submit Original Sheet 1 to FERC Electric Tariff, Third Revised Volume 1... Maine Power Company. Description: Central Maine Power Company submits executed Engineering and...

77 FR 76476 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-28

.... Applicants: Sierra Pacific Power Company. Description: Rate Schedule No. 64. Engineering Procurement... that the Commission received the following electric rate filings: Docket Numbers: ER13-251-001... Numbers: ER13-428-001. Applicants: Pennsylvania Electric Company, PJM Interconnection, L.L.C. Description...

Remediation System Evaluation, Vineland Chemical Company Superfund Site, Vineland, New Jersey

EPA Pesticide Factsheets

The Vineland Chemical Company Superfund Site was selected by EPA OSRTI based on recommendations from the EPA Remedial Project Manager for the site and from the U.S. Army Corps of Engineers (USACE) Philadelphia District that provides oversight of remedial..

78 FR 6247 - Airworthiness Directives; the Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-30

... Company Model 757 airplanes. The existing AD currently requires revising the maintenance program by... for ignition sources inside fuel tanks caused by latent failures, alterations, repairs, or maintenance... CONTACT: Kevin Nguyen, Aerospace Engineer, Propulsion Branch, ANM-140S, FAA, Seattle Aircraft...

12. GENERAL VIEW OF UNITEDTOD TWINTANDEM STEAM ENGINE, AS SEEN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. GENERAL VIEW OF UNITED-TOD TWIN-TANDEM STEAM ENGINE, AS SEEN FROM WALKWAY ALONG WALL, ON THE OTHER SIDE OF WHICH STOOD THE 40" BLOOMING MILL - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

Status of Social Engineering Awareness in Business Organizations and Colleges/Universities

ERIC Educational Resources Information Center

Hauser, Deanna Mae

2017-01-01

Social engineers manipulate individuals into divulging confidential information or compromising personal or organizational security. The purpose of this qualitative case study was to examine the potential lack of social engineering awareness that affects employees at companies in southeastern Michigan. The research method consisted of interviews…

40 CFR 89.1009 - What special provisions apply to branded engines?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false What special provisions apply to branded engines? 89.1009 Section 89.1009 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... branded engines? A manufacturer identifying the name and trademark of another company on the emission...

Continuing Education for Scientists and Engineers: Delivery Systems in North Carolina.

ERIC Educational Resources Information Center

Harrell, Daniel E.; Gibbs, Rebecca F.

Focusing on the continuing education (CE) of scientists/engineers in North Carolina working in small (1-500 employees), geographically dispersed companies, this study: 1) identified and described CE resources currently being used by scientists/engineers to maintain and extend their professional competence and capabilities; 2) determined the extent…

Genetic Engineering of Plants. Agricultural Research Opportunities and Policy Concerns.

ERIC Educational Resources Information Center

Roberts, Leslie

Plant scientists and science policymakers from government, private companies, and universities met at a convocation on the genetic engineering of plants. During the convocation, researchers described some of the ways genetic engineering may be used to address agricultural problems. Policymakers delineated and debated changes in research funding…

75 FR 77570 - Airworthiness Directives; General Electric Company CF6 Series Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-13

... electronically. Mail: Docket Management Facility, U.S. Department of Transportation, 1200 New Jersey Avenue, SE...-2251. FOR FURTHER INFORMATION CONTACT: Tomasz Rakowski, Aerospace Engineer, Engine Certification Office... signed the comment on behalf of an association, business, labor union, etc.). You may review the DOT's...

Job Prospects for Chemical Engineers.

ERIC Educational Resources Information Center

Basta, Nicholas

1985-01-01

The job situation for new chemical engineers with bachelor's degrees is continuing to reflect the gradual improvement that began in 1983. However, companies are looking for graduates with technical expertise as well as marketing, sales, or communications skills. Smaller classes may lead to shortages of chemical engineering graduates in the future.…

The research and development of damage tolerant carbon fiber composites

NASA Astrophysics Data System (ADS)

Miranda, John Armando

This record of study takes a first hand look at corporate research and development efforts to improve the damage tolerance of two unique composite materials used in high performance aerospace applications. The professional internship with The Dow Chemical Company---Dow/United Technologies joint venture describes the intern's involvement in developing patentable process technologies for interleave toughening of high temperature resins and their composites. The subsequent internship with Hexcel Corporation describes the intern's involvement in developing the damage tolerance of novel and existing honeycomb sandwich structure technologies. Through the Doctor of Engineering professional internship experience this student exercised fundamental academic understanding and methods toward accomplishing the corporate objectives of the internship sponsors in a resource efficient and cost-effective manner. Also, the student gained tremendous autonomy through exceptional training in working in focused team environments with highly trained engineers and scientists in achieving important corporate objectives.

Acoustics: A branch of engineering at the Universidad Austral de Chile (UACh)

NASA Astrophysics Data System (ADS)

Poblete, Victor; Arenas, Jorge P.; Sommerhoff, Jorge

2002-11-01

At the end of the 1960s, the first acousticians graduating at UACh had acquired an education in applied physics and musical arts, since there was no College of Engineering at that time. Initially, they had a (rather modest) four-year undergraduate program, and most of the faculty were not specialized teachers. The graduates from such a program received a sound engineering degree and they were skilled for jobs in the musical industry and sound reinforcement companies. In addition, they worked as sound engineers and producers. Later, because of the scientific, industrial and educational changes in Chile during the 1980s, the higher education system had massive changes that affected all of the undergraduate and graduate programs of the 61 universities in Chile. The UACh College of Engineering was officially founded in 1989. Then, acoustics as an area of expertise was included, widened and developed as an interdisciplinary subject. Currently, the undergraduate program in acoustics at UACh offers a degree in engineering sciences and a 6-year professional studies in Civil Engineering (Acoustics), having two main fields: Sound and Image, and Environment and Industry.

Genetically Engineered Materials for Biofuels Production

NASA Astrophysics Data System (ADS)

Raab, Michael

2012-02-01

Agrivida, Inc., is an agricultural biotechnology company developing industrial crop feedstocks for the fuel and chemical industries. Agrivida's crops have improved processing traits that enable efficient, low cost conversion of the crops' cellulosic components into fermentable sugars. Currently, pretreatment and enzymatic conversion of the major cell wall components, cellulose and hemicellulose, into fermentable sugars is the most expensive processing step that prevents widespread adoption of biomass in biofuels processes. To lower production costs we are consolidating pretreatment and enzyme production within the crop. In this strategy, transgenic plants express engineered cell wall degrading enzymes in an inactive form, which can be reactivated after harvest. We have engineered protein elements that disrupt enzyme activity during normal plant growth. Upon exposure to specific processing conditions, the engineered enzymes are converted into their active forms. This mechanism significantly lowers pretreatment costs and enzyme loadings (>75% reduction) below those currently available to the industry.

Turnkey CAD/CAM systems' integration with IPAD systems

NASA Technical Reports Server (NTRS)

Blauth, R. E.

1980-01-01

Today's commercially available turnkey CAD/CAM systems provide a highly interactive environment, and support many specialized application functions for the design/drafting/manufacturing process. This paper presents an overview of several aerospace companies which have successfully integrated turnkey CAD/CAM systems with their own company wide engineering and manufacturing systems. It also includes a vendor's view of the benefits as well as the disadvantages of such integration efforts. Specific emphasis is placed upon the selection of standards for representing geometric engineering data and for communicating such information between different CAD/CAM systems.

Allison moving forward

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raflo, D.

1994-07-01

Allison has been on its own since December 1, when General Motors Corporation sold its former Allison Gas Turbine Division to Clayton, Dubilier & Rice Inc, a private New York investment firm, and a group of senior Allison managers for $318 million. Allison engine Company`s current product line includes large engines, small aircraft engines, and industrial engines. Over 140,000 engines have been produced since 1915, giving Allison a large stake in world leaderhsip. With strong cogeneration markets already established in Europe and Japan, Allison`s industrial engines are being positioned to compete in emerging markets in China, Indonesia and the Sovietmore » Union. Cogeneration market potential in the US improves despite the current popularity with abundant, low-cost natural gas because of the South Coast Air Control Management District`s push for reduced emissions. The new 7000-shp KB7 industrial engine is the latest addition to the 501K engine family, and adds increased power (by 1700 shp), with a boost compressor to the current core compressor increasing air flow, along with a new low-loss exhaust system. Allison`s new AE series of turboprop (AE 2100) and turbofan (AE 3007) engines, with engine cores derived from the T406 design, have been selected to power regional airliners. 2 figs.« less

2. PERSPECTIVE VIEW OF SOUTH SIDE AND WEST END OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. PERSPECTIVE VIEW OF SOUTH SIDE AND WEST END OF ENGINE REPAIR HOUSE, HARBISON-WALKER QUARRY - Harbison-Walker Refractories Company, Engine Repair House, West end of Shirley Street, Mount Union, Huntingdon County, PA

76 FR 6535 - Airworthiness Directives; The Boeing Company Model MD-90-30 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-07

.... FOR FURTHER INFORMATION CONTACT: William S. Bond, Aerospace Engineer, Propulsion Branch, ANM-140L, FAA..., contact William S. Bond, Aerospace Engineer, Propulsion Branch, ANM-140L, FAA, Los Angeles Aircraft...

How to Find Reliable ENT Info

MedlinePlus

... information about your condition may be difficult. Most search engines and directories do not rank information from your ... wants you to buy its product paid the search engine company to list it near the top. Your ...

40 CFR 98.237 - Records that must be retained.

Code of Federal Regulations, 2013 CFR

2013-07-01

... emissions computer model runs used for engineering estimation of emissions. (e) The records required under § 98.3(g)(2)(i) shall include an explanation of how company records, engineering estimation, or best...

40 CFR 98.237 - Records that must be retained.

Code of Federal Regulations, 2014 CFR

2014-07-01

... emissions computer model runs used for engineering estimation of emissions. (e) The records required under § 98.3(g)(2)(i) shall include an explanation of how company records, engineering estimation, or best...

40 CFR 98.237 - Records that must be retained.

Code of Federal Regulations, 2012 CFR

2012-07-01

... emissions computer model runs used for engineering estimation of emissions. (e) The records required under § 98.3(g)(2)(i) shall include an explanation of how company records, engineering estimation, or best...