Effects of time of day on shopping behavior.

PubMed

Chebat, J C

1999-04-01

Shoppers interviewed in a shopping mall at different times of the day show different activities within the mall and attitudes toward the products. Prices also vary with the time of the day. These results can be explained in terms of shopping values and the related demographic characteristics of the population visiting the shopping center at different times of the day.

Price-Shopping in Consumer-Directed Health Plans

PubMed Central

Sood, Neeraj; Wagner, Zachary; Huckfeldt, Peter; Haviland, Amelia

2013-01-01

We use health insurance claims data from 63 large employers to estimate the extent of price shopping for nine common outpatient services in consumer-directed health plans (CDHPs) compared to traditional health plans. The main measures of price-shopping include: (1) the total price paid on the claim, (2) the share of claims from low and high cost providers and (3) the savings from price shopping relative to choosing prices randomly. All analyses control for individual and zip code level demographics and plan characteristics. We also estimate differences in price shopping within CDHPs depending on expected health care costs and whether the service was bought before or after reaching the deductible. For 8 out of 9 services analyzed, prices paid by CDHP and traditional plan enrollees did not differ significantly; CDHP enrollees paid 2.3% less for office visits. Similarly, office visits was the only service where CDHP enrollment resulted in a significantly larger share of claims from low cost providers and greater savings from price shopping relative to traditional plans. There was also no evidence that, within CDHP plans, consumers with lower expected medical expenses exhibited more price-shopping or that consumers exhibited more price-shopping before reaching the deductible. PMID:25342936

"It Looks Like an Adult Sweetie Shop": Point-of-Sale Tobacco Display Exposure and Brand Awareness in Scottish Secondary School Students.

PubMed

van der Sluijs, Winfried; Haseen, Farhana; Miller, Martine; MacGregor, Andy; Sharp, Clare; Amos, Amanda; Best, Catherine; Stead, Martine; Eadie, Douglas; Pearce, Jamie; Frank, John; Haw, Sally

2016-10-01

As further restrictions have been placed on tobacco advertising and promotions, point-of-sale (PoS) displays of cigarettes in shops have become an increasingly important source of young people's exposure to tobacco products. This study explored the relationship between PoS displays of cigarettes and brand awareness among secondary school students in Scotland. Cross-sectional school surveys (n = 1406) and focus groups (n = 86) were conducted with S2 (13-14 years) and S4 (15-16 years) students in four schools of differing socioeconomic status in 2013, prior to the PoS display ban in large shops. Adjusted negative binomial regression analysis examined associations between brand awareness and exposure variables (visiting tobacco retailers, noticing displays of tobacco products). Students visiting small shops more frequently (relative rate ratio [RRR] 1.19, 95% confidence interval [CI] 1.01-1.41) and those who noticed cigarette displays in small shops (RRR 1.24, 95% CI 1.03-1.51) and large supermarkets (RRR 1.15, 95% CI 1.01-1.30) had higher brand awareness. The focus groups supported these findings. Participants described PoS tobacco displays as being eye-catching, colorful and potentially attractive to young people. This mixed-methods study showed that higher cigarette brand awareness was significantly associated with regularly visiting small shops and noticing PoS displays in small and large shops, even when students' smoking status, smoking in their social networks, leisure activities, and demographics were included as confounding variables. This highlights the importance of PoS displays of tobacco products in increasing brand awareness, which is known to increase youth smoking susceptibility, and thus the importance of implementing PoS display bans in all shops. As increasing restrictions have been placed on tobacco promotion in many countries, PoS displays of cigarettes in shops have become an important source of young people's exposure to tobacco products and marketing. This mixed-methods study showed that prior to the PoS display ban in Scotland, and controlling for other factors, 13- and 15-year olds who regularly visited small shops and those who noticed PoS displays in small and large shops, had a higher awareness of cigarette brands. This highlights the importance of PoS displays in increasing youth brand awareness, which increases smoking susceptibility, and thus the need for comprehensive bans on PoS displays which cover all shops. © The Author 2016. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco.

Doctor shopping by overweight and obese patients is associated with increased healthcare utilization.

PubMed

Gudzune, Kimberly A; Bleich, Sara N; Richards, Thomas M; Weiner, Jonathan P; Hodges, Krista; Clark, Jeanne M

2013-07-01

Negative interactions with healthcare providers may lead patients to switch physicians or "doctor shop." We hypothesized that overweight and obese patients would be more likely to doctor shop, and as a result, have increased rates of emergency department (ED) visits and hospitalizations as compared to normal weight nonshoppers. We combined claims data from a health plan in one state with information from beneficiaries' health risk assessments. The primary outcome was "doctor shopping," which we defined as having outpatient claims with ≥5 different primary care physicians (PCPs) during a 24-month period. The independent variable was standard NIH categories of weight by BMI. We performed multivariate logistic regression to evaluate the association between weight categories and doctor shopping. We conducted multivariate zero-inflated negative binominal regression to evaluate the association between weight-doctor shopping categories with counts of ED visits and hospitalizations. Of the 20,726 beneficiaries, the mean BMI was 26.3 kg m(-2) (SD 5.1), mean age was 44.4 years (SD 11.1) and 53% were female. As compared to normal weight beneficiaries, overweight beneficiaries had 23% greater adjusted odds of doctor shopping (OR 1.23, 95%CI 1.04-1.46) and obese beneficiaries had 52% greater adjusted odds of doctor shopping (OR 1.52, 95%CI 1.26-1.82). As compared to normal weight non-shoppers, overweight and obese shoppers had higher rates of ED visits (IRR 1.85, 95%CI 1.37-2.45; IRR 1.83, 95%CI 1.34-2.50, respectively), which persisted during within weight group comparisons (Overweight IRR 1.50, 95%CI 1.10-2.03; Obese IRR 1.54, 95%CI 1.12-2.11). Frequently changing PCPs may impair continuity and result in increased healthcare utilization. Copyright © 2012 The Obesity Society.

13. Detail of doubledoor opening between machine shop section of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. Detail of double-door opening between machine shop section of roundhouse and engine house section of roundhouse. Engine house visible through rectangular opening. At one time the opening extended to the intrados of the arch above the doorway, allowing railroad engines to fit inside the machine shop. View to east. - Duluth & Iron Range Rail Road Company Shops, Roundhouse, Southwest of downtown Two Harbors, northwest of Agate Bay, Two Harbors, Lake County, MN

“It Looks Like an Adult Sweetie Shop”: Point-of-Sale Tobacco Display Exposure and Brand Awareness in Scottish Secondary School Students

PubMed Central

van der Sluijs, Winfried; Miller, Martine; MacGregor, Andy; Sharp, Clare; Amos, Amanda; Best, Catherine; Stead, Martine; Eadie, Douglas; Pearce, Jamie; Frank, John; Haw, Sally

2016-01-01

Introduction: As further restrictions have been placed on tobacco advertising and promotions, point-of-sale (PoS) displays of cigarettes in shops have become an increasingly important source of young people’s exposure to tobacco products. This study explored the relationship between PoS displays of cigarettes and brand awareness among secondary school students in Scotland. Methods: Cross-sectional school surveys (n = 1406) and focus groups (n = 86) were conducted with S2 (13–14 years) and S4 (15–16 years) students in four schools of differing socioeconomic status in 2013, prior to the PoS display ban in large shops. Adjusted negative binomial regression analysis examined associations between brand awareness and exposure variables (visiting tobacco retailers, noticing displays of tobacco products). Results: Students visiting small shops more frequently (relative rate ratio [RRR] 1.19, 95% confidence interval [CI] 1.01–1.41) and those who noticed cigarette displays in small shops (RRR 1.24, 95% CI 1.03–1.51) and large supermarkets (RRR 1.15, 95% CI 1.01–1.30) had higher brand awareness. The focus groups supported these findings. Participants described PoS tobacco displays as being eye-catching, colorful and potentially attractive to young people. Conclusions: This mixed-methods study showed that higher cigarette brand awareness was significantly associated with regularly visiting small shops and noticing PoS displays in small and large shops, even when students’ smoking status, smoking in their social networks, leisure activities, and demographics were included as confounding variables. This highlights the importance of PoS displays of tobacco products in increasing brand awareness, which is known to increase youth smoking susceptibility, and thus the importance of implementing PoS display bans in all shops. Implications: As increasing restrictions have been placed on tobacco promotion in many countries, PoS displays of cigarettes in shops have become an important source of young people’s exposure to tobacco products and marketing. This mixed-methods study showed that prior to the PoS display ban in Scotland, and controlling for other factors, 13- and 15-year olds who regularly visited small shops and those who noticed PoS displays in small and large shops, had a higher awareness of cigarette brands. This highlights the importance of PoS displays in increasing youth brand awareness, which increases smoking susceptibility, and thus the need for comprehensive bans on PoS displays which cover all shops. PMID:26883750

13. View northeast of boiler plant (Building 39), engineering work ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. View northeast of boiler plant (Building 39), engineering work order building/former tin shop (Building 129), laundry MAT workshop (Building 28), pipe shop/former water softening plant (Building 81), paint spray shop/former blacksmith shop (Building 95), fuel oil storage tank building (Building 103), mason's shop (Building 77), and carpenter shop (Building 97) with steel water tank (Building 124) in background - National Home for Disabled Volunteer Soldiers Western Branch, 4101 South Fourth Street, Leavenworth, Leavenworth County, KS

14. AERIAL VIEW OF ENGINE DISPLAY INSIDE PASSENGER CAR SHOP ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. AERIAL VIEW OF ENGINE DISPLAY INSIDE PASSENGER CAR SHOP (NOW A TRANSPORTATION MUSEUM) - Baltimore & Ohio Railroad, Mount Clare Passenger Car Shop, Southwest corner of Pratt & Poppleton Streets, Baltimore, Independent City, MD

4. Engine Stores Building, Southern Pacific Railroad Carlin Shops, oblique ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. Engine Stores Building, Southern Pacific Railroad Carlin Shops, oblique view of the southwest end and southeast side (135mm lens). Condemned freight cars spotted on the adjacent track prevented clear photography of southeast side. - Southern Pacific Railroad, Carlin Shops, Engine Stores Building, Foot of Sixth Street, Carlin, Elko County, NV

3. Engine Stores Building, Southern Pacific Railroad Carlin Shops, oblique ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. Engine Stores Building, Southern Pacific Railroad Carlin Shops, oblique view of the northeast end and southeast side (90mm lens). Condemned freight cars spotted on the adjacent track prevented clear photography of southeast side. - Southern Pacific Railroad, Carlin Shops, Engine Stores Building, Foot of Sixth Street, Carlin, Elko County, NV

11. EASTERN EDGE OF POST ENGINEER'S SHOPS AND YARD BUILDINGS, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. EASTERN EDGE OF POST ENGINEER'S SHOPS AND YARD BUILDINGS, WITH BUILDING 283 ON RIGHT, LOOKING 186 DEGREES SOUTH. - Presidio of San Francisco, Warehouse & Auto Shop, Crissy Field North cantonment, San Francisco, San Francisco County, CA

Prevalence and determinants of pharmacy shopping behaviour.

PubMed

Buurma, H; Bouvy, M L; De Smet, P A G M; Floor-Schreudering, A; Leufkens, H G M; Egberts, A C G

2008-02-01

Discontinuity of care bears the risk of medication errors and poor clinical outcomes. Little is known about the continuity of care related to pharmacies. Therefore, we studied the prevalence and determinants of pharmacy shopping behaviour in the Netherlands. Beneficiaries from a Dutch pharmacy claims database who had visited two or more pharmacies in 2001 were indicated as 'shoppers' (n = 45 805). A random sample was taken from all the other beneficiaries who had received at least one prescription: 'non-shoppers' (n = 45 805). Shoppers were classified as light (all patients who visited more than one pharmacy at least once in 2001, except for patients defined as heavy or moderate shoppers), moderate (visited 3 or 4 pharmacies and had proportion of prescriptions elsewhere >10% and number of prescriptions elsewhere >10) or heavy (visited 5 or more pharmacies and had proportion of prescriptions elsewhere >10% and number of prescriptions elsewhere >10). Determinants of shopping behaviour were investigated as well as the association between any dispensing of Anatomical Therapeutic Chemical (ATC) classes of drugs and this behaviour. 10.8% beneficiaries were identified as shoppers: 98.8%'light shoppers', 1.0%'moderate shoppers' and 0.2%'heavy shoppers'. Female gender [odds ratio (OR)(adj) 1.2; 95% confidence interval (CI) 1.1-1.2], younger age (OR(adj) 1.7; 95%CI 1.7-1.8), the use of > or =3 drugs (OR(adj) 2.9; 95%CI 2.8-3.0) and visiting different kind of prescribers (OR(adj) 2.4; 95%CI 2.4-2.5) were associated with shopping behaviour. Shoppers more frequently received at least one prescription for systemic anti-infectives (51.7% vs. 30.8%; OR 2.4; 95%Cl 2.3-2.5) and for nervous system drugs (46.2% vs. 29.3%; OR 2.1; 95%Cl 2.0-2.1). Pharmacy shopping behaviour is limited in the Netherlands. However, it may put the patient at risk for unintentional problems, such as drug-drug interactions with anti-infectives. A small proportion of patients exhibit possibly intentional shopping behaviour with psychotropic drugs.

Addressing sexual health needs: a comparison of a one-stop shop with separate genitourinary medicine and family planning services.

PubMed

French, Rebecca S; Mercer, Catherine H; Robinson, Angela J; Gerressu, Makeda; Rogstad, Karen E

2010-10-01

Little evidence is available on the extent to which one-stop shops address users' sexual health needs and the extent to which they identify additional needs users may not have identified. As part of the One-Stop Shop Evaluation, a questionnaire was designed to compare the reasons for users' visits and the reported outcomes of visits at a one-stop shop with the experiences of users in separate genitourinary medicine (GUM) and contraceptive clinics. The difference in the proportions of those attending the one-stop shop and those attending the control sites services for a sexually transmitted infection (STI)-related reason who were diagnosed with an STI was minimal, but those attending for an STI-related reason in the one-stop shop were more likely to receive an additional contraceptive outcome. Women attending for a contraceptive-related reason at the one-stop shop were more likely to have an STI screen than those attending the control sites for the same reason, but there was little difference in the proportions amongst this group receiving an STI diagnosis or receiving treatment. When focusing on women attending for a pregnancy-related reason, one-stop shop users were more likely to have received contraceptive advice or supplies. It was not possible in our evaluation to determine the relative effectiveness of the one-stop shop in comparison to the traditional GUM and contraceptive clinics in improving sexual health status, however the one-stop shop was more likely to address additional sexual health needs that service users may not have previously identified.

MTRETR MAINTENANCE SHOP, TRA653. FLOOR PLAN FOR FIRST FLOOR: MACHINE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MTR-ETR MAINTENANCE SHOP, TRA-653. FLOOR PLAN FOR FIRST FLOOR: MACHINE SHOP, ELECTRICAL AND INSTRUMENT SHOP, TOOL CRIB, ELECTRONIC SHOP, LOCKER ROOM, SPECIAL TEMPERATURE CONTROLLED ROOM, AND OFFICES. "NEW" ON DRAWING REFERS TO REVISION OF 11/1956 DRAWING ON WHICH AREAS WERE DESIGNATED AS "FUTURE." HUMMEL HUMMEL & JONES 810-MTR-ETR-653-A-7, 5/1957. INL INDEX NO. 532-0653-00-381-101839, REV. 2. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Doctor shopping by overweight and obese patients is associated with increased healthcare utilization

PubMed Central

Gudzune, Kimberly A.; Bleich, Sara N.; Richards, Thomas M.; Weiner, Jonathan P.; Hodges, Krista; Clark, Jeanne M.

2012-01-01

Negative interactions with healthcare providers may lead patients to switch physicians or “doctor shop.” We hypothesized that overweight and obese patients would be more likely to doctor shop, and as a result, have increased rates of emergency department (ED) visits and hospitalizations as compared to normal weight non-shoppers. We combined claims data from a health plan in one state with information from beneficiaries’ health risk assessments. The primary outcome was “doctor shopping,” which we defined as having outpatient claims with ≥5 different primary care physicians (PCPs) during a 24-month period. The independent variable was standard NIH categories of weight by BMI. We performed multivariate logistic regression to evaluate the association between weight categories and doctor shopping. We conducted multivariate zero-inflated negative binominal regression to evaluate the association between weight-doctor shopping categories with counts of ED visits and hospitalizations. Of the 20,726 beneficiaries, the mean BMI was 26.3 kg/m2 (SD 5.1), mean age was 44.4 years (SD 11.1) and 53% were female. As compared to normal weight beneficiaries, overweight beneficiaries had 23% greater adjusted odds of doctor shopping (OR 1.23, 95%CI 1.04–1.46) and obese beneficiaries had 52% greater adjusted odds of doctor shopping (OR 1.52, 95%CI 1.26–1.82). As compared to normal weight non-shoppers, overweight and obese shoppers had higher rates of ED visits (IRR 1.85, 95%CI 1.37–2.45; IRR 1.83, 95%CI 1.34–2.50, respectively), which persisted during within weight group comparisons (Overweight IRR 1.50, 95%CI 1.10–2.03; Obese IRR 1.54, 95%CI 1.12–2.11). Frequently changing PCPs may impair continuity and result in increased healthcare utilization. PMID:23671015

Standardized Curriculum for Diesel Engine Mechanics.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

Standardized curricula are provided for two courses for the secondary vocational education program in Mississippi: diesel engine mechanics I and II. The eight units in diesel engine mechanics I are as follows: orientation; shop safety; basic shop tools; fasteners; measurement; engine operating principles; engine components; and basic auxiliary…

KSC-03pd0360

NASA Image and Video Library

2003-02-12

KENNEDY SPACE CENTER, FLA. - Retired Navy Admiral Harold W. Gehman Jr. (second from right), chairman of the Columbia Accident Investigation Board, visits the Thermal Protection System shop and is briefed by Martin Wilson (left), the shop manager. Gehman and other members of the board are visiting sites at KSC to become familiar with the Shuttle launch process. The independent board is charged with determining what caused the destruction of the Space Shuttle Columbia and the loss of its seven-member crew on Feb. 1 during reentry.

KSC-03pd0362

NASA Image and Video Library

2003-02-12

KENNEDY SPACE CENTER, FLA. - Retired Navy Admiral Harold W. Gehman Jr. (third from left), chairman of the Columbia Accident Investigation Board, visits the Thermal Protection System shop and is briefed by Martin Wilson (second from left), the shop manager. Gehman and other members of the board are visiting sites at KSC to become familiar with the Shuttle launch process. The independent board is charged with determining what caused the destruction of the Space Shuttle Columbia and the loss of its seven-member crew on Feb. 1 during reentry.

KSC-03pd0359

NASA Image and Video Library

2003-02-12

KENNEDY SPACE CENTER, FLA. - Retired Navy Admiral Harold W. Gehman Jr. (second from left), chairman of the Columbia Accident Investigation Board, visits the Thermal Protection System shop and is briefed by Martin Wilson (second from right), the shop manager. Gehman and other members of the board are visiting sites at KSC to become familiar with the Shuttle launch process. The independent board is charged with determining what caused the destruction of the Space Shuttle Columbia and the loss of its seven-member crew on Feb. 1 during reentry.

KSC-03pd0358

NASA Image and Video Library

2003-02-12

KENNEDY SPACE CENTER, FLA. - Retired Navy Admiral Harold W. Gehman Jr. (left), chairman of the Columbia Accident Investigation Board, visits the Thermal Protection System shop and is briefed by Martin Wilson (right), the shop manager. Gehman and other members of the board are visiting sites at KSC to become familiar with the Shuttle launch process. The independent board is charged with determining what caused the destruction of the Space Shuttle Columbia and the loss of its seven-member crew on Feb. 1 during reentry.

KSC-03pd0361

NASA Image and Video Library

2003-02-12

KENNEDY SPACE CENTER, FLA. - Retired Navy Admiral Harold W. Gehman Jr. (center), chairman of the Columbia Accident Investigation Board, visits the Thermal Protection System shop and is briefed by Martin Wilson (pointing), the shop manager. Gehman and other members of the board are visiting sites at KSC to become familiar with the Shuttle launch process. The independent board is charged with determining what caused the destruction of the Space Shuttle Columbia and the loss of its seven-member crew on Feb. 1 during reentry.

WASTE MINIZATION OPPORTUNITY ASSESSMENT: NAVAL UNDERSEA WARFARE ENGINEERING STATION - KEYPORT, WA

EPA Science Inventory

This report describes the application of EPA's waste minimization assessment procedures to a torpedo maintenance facility at the Naval Undersea Warfare Engineering Station, Keyport, WA. he assessment focused on the Mark 48 shop and the Mark 46 shop. hese shops service the Mark 48...

9. Interior, original Boiler and Engine Room, Engine Stores Building, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. Interior, original Boiler and Engine Room, Engine Stores Building, Southern Pacific Railroad Carlin Shops, view to south (90mm lens). Note the roof truss system and built-up iron longitudinal roof girders. - Southern Pacific Railroad, Carlin Shops, Engine Stores Building, Foot of Sixth Street, Carlin, Elko County, NV

Space Odyssey Gift Shop

NASA Technical Reports Server (NTRS)

2000-01-01

The Space Odyssey Gift Shop located in StenniSphere at the John C. Stennis Space Center in Hancock County, Miss., offers every visitor the opportunity to go home with 'the right stuff' from his or her StenniSphere visit. The gift shop is located just inside the front doors to StenniSphere and offers a wide range of space-related apparel, memorabilia, toys, books, mission patches and more.

Food shopping behaviors of residents in two Bronx neighborhoods

PubMed Central

Dannefer, Rachel; Adjoian, Tamar; Brathwaite, Chantelle; Walsh, Rhonda

2015-01-01

Background Numerous researchers have documented associations between neighborhood food environments and residents' diets. However, few quantitative studies have examined the food shopping behaviors of residents in low-income neighborhoods, including the types of stores patronized and frequency of visits. This study presents findings on the food shopping behaviors of residents in the Bronx neighborhoods of West Farms and Fordham. Methods Street-intercept surveys were conducted in spring 2012 with residents of West Farms and Fordham as part of a broader program evaluation. The survey included questions on general food shopping behaviors including visits to neighborhood bodegas (corner stores) and supermarkets, mode of transportation to the supermarket most commonly frequented, and the primary source for purchases of fruits and vegetables. Results The survey was conducted with 505 respondents. The sample was 59% Hispanic and 34% black, with a median age of 45 years. Thirty-four percent of respondents had less than a high school education, 30% were high school graduates or had their GED, and 36% had attended some college. Almost all respondents (97%) shopped at supermarkets in their neighborhood; 84% usually shopped at a supermarket within their neighborhood, and 16% usually shopped at a supermarket outside of their neighborhood. Most respondents (95%) shopped at bodegas in their neighborhood, and 65% did so once per day or more. Conclusions Residents of these neighborhoods have high exposure to local food stores, with the vast majority of respondents shopping at neighborhood supermarkets and bodegas and almost 2 in 3 respondents going to bodegas every day. These findings demonstrate the important role of supermarkets and bodegas in local residents' shopping patterns and support the inclusion of these stores in efforts to create food environments that support and promote healthy eating. PMID:29546141

3. INTERIOR VIEW OF MAINTENANCE ROOM OF THE CIVIL ENGINEERING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. INTERIOR VIEW OF MAINTENANCE ROOM OF THE CIVIL ENGINEERING SHOP, BUILDING 103, LOOKING WEST. - Mill Valley Air Force Station, Civil Engineering Maintenance Shop, East Ridgecrest Boulevard, Mount Tamalpais, Mill Valley, Marin County, CA

An engine awaits processing in the new engine shop at KSC

NASA Technical Reports Server (NTRS)

1998-01-01

In the Space Shuttle Main Engine Processing Facility (SSMEPF), a new Block 2A engine sits on the workstand as technicians process it. The engine is scheduled to fly on the Space Shuttle Endeavour during the STS-88 mission in December 1998. The SSMEPF officially opened on July 6, replacing the Shuttle Main Engine Shop.

The "Shopping" Behavior of Parents of Mentally Retarded Children: The Professional Person's Role

ERIC Educational Resources Information Center

Anderson, Kathryn A.

1971-01-01

Discussed is the role of the professional in preventing or stopping diagnostic and therapeutic shopping (repeated visits to the same or different professionals without resolution of a resolvable problem), with emphasis on the initial informing interview. (KW)

10. Interior detail, original Boiler and Engine Room, Engine Stores ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. Interior detail, original Boiler and Engine Room, Engine Stores Building, Southern Pacific Railroad Carlin Shops, view to east (90mm lens). Note the pin-connected roof truss system and built-up iron longitudinal roof girders. - Southern Pacific Railroad, Carlin Shops, Engine Stores Building, Foot of Sixth Street, Carlin, Elko County, NV

Why do you shop there? A mixed methods study mapping household food shopping patterns onto weekly routines of black women.

PubMed

DiSantis, Katherine Isselmann; Hillier, Amy; Holaday, Rio; Kumanyika, Shiriki

2016-01-28

The effectiveness of initiatives to increase healthy food access may be affected by where people decide to shop. People with poor neighborhood access to large grocery stores develop shopping patterns that require traveling to other areas, and some people who do have neighborhood access also travel elsewhere for food shopping. We sought to gain an understanding of household food shopping patterns in a sample of Black women in terms of where they shopped and why. All food shopping trips of 35 low- or middle/high-income black mothers or caregivers living with at least one child were identified from grocery shopping receipts collected over four consecutive weeks. Food shopping locations were mapped along with locations of participants' homes and other places they visited during weekly routine travels (e.g. work, child's school). Semi-structured individual interviews elicited narrative information about whether and how grocery shopping trips were linked to routine travels. Inductive content analysis was utilized to identify emergent themes from interviews. Themes were considered in relation to geospatial distances and travel patterns identified through mapping of participants' shopping. Participants shopped at an average of six different stores, traveling on average a total of 35 miles (sd = 41) (Euclidian distance) over the four weeks. The most frequented store was within a mile of home (57%) or home or another place visited in the weekly routine for about 77% of participants. Interview results emphasized the concept of convenience which referred to geographical proximity to the home or routine destinations and also to potential to save time because several stores were co-located or because the store layout was easy to navigate and familiar. Store selection also related to mode of transportation, pricing, and family preference for certain foods. People have specific reasons for consistently shopping in areas outside of their neighborhood of residence. Incorporating considerations other than proximity (e.g. time saving while shopping, promoting less familiar foods, pricing) into food environment interventions may facilitate use of new stores by neighborhood residents and thereby increase the viability of these stores as health-promoting food environment interventions.

Shop test of the 501F; A 150 MW combustion turbine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Entenmann, D.T.; North, W.E.; Fukue, I.

1991-10-01

The 501F is a 150 MW-class 60 Hz engine jointly developed by Westinghouse Electric Corporation and Mitsubishi Heavy Industries, Ltd. This paper describes the full-load shop test program for the prototype engine, as carried out in Takasago, Japan. The shop test included a full range of operating conditions, from startup through full load at the 1260{degrees} C (2300{degrees} F) design turbine inlet temperature. The engine was prepared with more than 1500 instrumentation points to monitor flow path characteristics, metal temperatures, displacements, pressures, cooling circuit characteristics, strains, sound pressure levels, and exhaust emissions. The results of this shop test indicate themore » new 501F engine design and development effort to be highly successful. The engine exceeds power and overall efficiency expectations, thus verifying the new concepts and design improvements.« less

An engine awaits processing in the new engine shop at KSC

NASA Technical Reports Server (NTRS)

1998-01-01

In the Space Shuttle Main Engine Processing Facility (SSMEPF), a new Block 2A engine sits on the transport cradle before being moved to the workstand. The engine is scheduled to fly on the Space Shuttle Endeavour during the STS-88 mission in December 1998. The SSMEPF officially opened on July 6, replacing the Shuttle Main Engine Shop.

3. EASTERN EDGE OF POST ENGINEER'S SHOPS AND YARD, LOOKING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. EASTERN EDGE OF POST ENGINEER'S SHOPS AND YARD, LOOKING 312 DEGREES NORTH WEST, EUCALYPTUS TREES DENOTE EDGE OF PRESIDIO. - Presidio of San Francisco, Post Engineer's Headquarters Office, Crissy Field North cantonment, San Francisco, San Francisco County, CA

7. Detail, 1885 Sanborn Fire Insurance Map, Carlin, Nevada, in ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. Detail, 1885 Sanborn Fire Insurance Map, Carlin, Nevada, in collection of Nevada Historical Society, Reno; credit Nevada Historical Society. Engine Stores Building is adjacent to R.R. Repair Shop, and is shown containing Library, Cooper Shop, Office, Ware Room, and Boiler & Engine Room. - Southern Pacific Railroad, Carlin Shops, Foot of Sixth Street, Carlin, Elko County, NV

Drug seller adherence to clinical protocols with integrated management of malaria, pneumonia and diarrhoea at drug shops in Uganda.

PubMed

Awor, Phyllis; Wamani, Henry; Tylleskar, Thorkild; Peterson, Stefan

2015-07-16

Drug shops are usually the first source of care for febrile children in Uganda although the quality of care they provide is known to be poor. Within a larger quasi-experimental study introducing the WHO/UNICEF recommended integrated community case management (iCCM) of malaria, pneumonia and diarrhoea intervention for community health workers in registered drug shops, the level of adherence to clinical protocols by drug sellers was determined. All drug shops (N = 44) in the intervention area were included and all child visits (N = 7,667) from October 2011-June 2012 to the participating drug shops were analysed. Drug shops maintained a standard iCCM register where they recorded the children seen, their symptoms, diagnostic test performed, treatments given and actions taken. The proportion of children correctly assessed and treated was determined from the registers. Malaria management: 6,140 of 7,667 (80.1%) total visits to drug shops were of children with fever. 5986 (97.5%) children with fever received a malaria rapid diagnostic test (RDT) and the RDT positivity rate was 78% (95% CI 77-79). 4,961/5,307 (93.4%) children with a positive RDT received artemisinin combination therapy. Pneumonia management: after respiratory rate assessment of children with cough and fast/difficult breathing, 3,437 (44.8%) were categorized as "pneumonia", 3,126 (91.0%) of whom received the recommended drug-amoxicillin. Diarrhoea management: 2,335 (30.5%) child visits were for diarrhoea with 2,068 (88.6%) correctly treated with oral rehydration salts and zinc sulphate. Dual/Triple classification: 2,387 (31.1%) children had both malaria and pneumonia and 664 (8.7%) were classified as having three illnesses. Over 90% of the children with dual or triple classification were treated appropriately. Meanwhile, 381 children were categorized as severely sick (with a danger sign) with 309 (81.1%) of them referred for appropriate management. With the introduction of the iCCM intervention at drug shops in Eastern Uganda, it was possible to achieve high adherence to the treatment protocols, which is likely compatible with increased quality of care.

NASA Administrator Visits Ames Research Center (Reporter Pkg - May 2013)

NASA Image and Video Library

2013-05-24

NASA Administrator Charles Bolden and Congressman Mike Honda (D-San Jose, CA) were special guests at Ames Research Center recently. During their visit, they visited the SpaceShop, where they were shown demonstrations of Ames' contributions to the PhoneSat nano-satellite mission and 3D printing activity

MTR WING, TRA604. FIRST FLOOR PLAN. ENTRY LOBBY, MACHINE SHOP, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MTR WING, TRA-604. FIRST FLOOR PLAN. ENTRY LOBBY, MACHINE SHOP, INSTRUMENT SHOP, COUNTING ROOM, HEALTH PHYSICS LAB, LABS AND OFFICES, STORAGE, SHIPPING AND RECEIVING. BLAW-KNOX 3150-4-2, 7/1950. INL INDEX NO. 053-604-00-099-100008, REV. 7. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Where Students Shop for Nutrition Facts.

ERIC Educational Resources Information Center

Teaching PreK-8, 1995

1995-01-01

Describes a school tour launched by a supermarket to familiarize children with basic facts about nutrition and healthful eating. Discusses visits to a perishable foods department, a shopping activity, a recipe preparation activity, and Food Pyramid activity. Suggests making enquiries about such tours with local supermarket chains and bringing it…

Supermarket Choice, Shopping Behavior, Socioeconomic Status, and Food Purchases

PubMed Central

Pechey, Rachel; Monsivais, Pablo

2015-01-01

Introduction Both SES and supermarket choice have been associated with diet quality. This study aimed to assess the contributions of supermarket choice and shopping behaviors to the healthfulness of purchases and social patterning in purchases. Methods Observational panel data on purchases of fruit and vegetables and less-healthy foods/beverages from 2010 were obtained for 24,879 households, stratified by occupational social class (analyzed in 2014). Households’ supermarket choice was determined by whether they ever visited market-defined high- or low-price supermarkets. Analyses also explored extent of use within supermarket choice groups. Shopping behaviors included trip frequency, trip size, and number of store chains visited. Results Households using low-price (and not high-price) supermarkets purchased significantly lower percentages of energy from fruit and vegetables and higher percentages of energy from less-healthy foods/beverages than households using high-price (and not low-price) supermarkets. When controlling for SES and shopping behaviors, the effect of supermarket choice was reduced but remained significant for both fruit and vegetables and less-healthy foods/beverages. The extent of use of low- or high-price supermarkets had limited effects on outcomes. More-frequent trips and fewer small trips were associated with healthier purchasing for both outcomes; visiting more store chains was associated with higher percentages of energy from fruit and vegetables. Conclusions Although both supermarket choice and shopping behaviors are associated with healthfulness of purchases, neither appears to contribute to socioeconomic differences. Moreover, differences between supermarket environments may not be primary drivers of the relationship between supermarket choice and healthfulness of purchases. PMID:26163172

Supermarket Choice, Shopping Behavior, Socioeconomic Status, and Food Purchases.

PubMed

Pechey, Rachel; Monsivais, Pablo

2015-12-01

Both SES and supermarket choice have been associated with diet quality. This study aimed to assess the contributions of supermarket choice and shopping behaviors to the healthfulness of purchases and social patterning in purchases. Observational panel data on purchases of fruit and vegetables and less-healthy foods/beverages from 2010 were obtained for 24,879 households, stratified by occupational social class (analyzed in 2014). Households' supermarket choice was determined by whether they ever visited market-defined high- or low-price supermarkets. Analyses also explored extent of use within supermarket choice groups. Shopping behaviors included trip frequency, trip size, and number of store chains visited. Households using low-price (and not high-price) supermarkets purchased significantly lower percentages of energy from fruit and vegetables and higher percentages of energy from less-healthy foods/beverages than households using high-price (and not low-price) supermarkets. When controlling for SES and shopping behaviors, the effect of supermarket choice was reduced but remained significant for both fruit and vegetables and less-healthy foods/beverages. The extent of use of low- or high-price supermarkets had limited effects on outcomes. More-frequent trips and fewer small trips were associated with healthier purchasing for both outcomes; visiting more store chains was associated with higher percentages of energy from fruit and vegetables. Although both supermarket choice and shopping behaviors are associated with healthfulness of purchases, neither appears to contribute to socioeconomic differences. Moreover, differences between supermarket environments may not be primary drivers of the relationship between supermarket choice and healthfulness of purchases. Copyright © 2015 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

An engine awaits processing in the new engine shop at KSC

NASA Technical Reports Server (NTRS)

1998-01-01

A new Block 2A engine awaits processing in the low bay of the Space Shuttle Main Engine Processing Facility (SSMEPF). Officially opened on July 6, the new facility replaces the Shuttle Main Engine Shop. The SSMEPF is an addition to the existing Orbiter Processing Facility Bay 3. The engine is scheduled to fly on the Space Shuttle Endeavour during the STS-88 mission in December 1998.

18. MAINTENANCE SHOP, FIRST FLOOR, INTERIOR, ENGINE AND AIRPLANE OVERHAUL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. MAINTENANCE SHOP, FIRST FLOOR, INTERIOR, ENGINE AND AIRPLANE OVERHAUL AREAS; LOOKING EAST - Northwest Airways Hangar & Administration Building, 590 Bayfield Street, St. Paul Downtown Airport (Holman), Saint Paul, Ramsey County, MN

17. MAINTENANCE SHOP, FIRST FLOOR, INTERIOR, ENGINE AND AIRPLANE OVERHAUL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. MAINTENANCE SHOP, FIRST FLOOR, INTERIOR, ENGINE AND AIRPLANE OVERHAUL AREAS; LOOKING WEST. - Northwest Airways Hangar & Administration Building, 590 Bayfield Street, St. Paul Downtown Airport (Holman), Saint Paul, Ramsey County, MN

Photographic copy of architectural drawings for Building 4315: Taylor & ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of architectural drawings for Building 4315: Taylor & Barnes, Architects & Engineers, 803 W. Third Street, Los Angeles California, O.C.E. Office of Civil Engineer Job No. Muroc ESA 210-50 and 210-44, Military Construction: Muroc Flight Test Base, Muroc, California, Utility Yard & Shops: Carpenter & Paint Shop, Utility Shop & Lavatory, Plan & Elevations, Sheet No. 4 of 8, May 1945. Reproduced from the holdings of the National Archives, Pacific Southwest Region - Edwards Air Force Base, North Base, Utility & Paint Shop, Second & E Streets, Boron, Kern County, CA

Impact of food advertising on food purchases by students in primary and secondary schools in south-eastern Poland.

PubMed

Mazur, A; Telega, G; Kotowicz, A; Małek, H; Jarochowicz, S; Gierczak, B; Mazurkiewicz, M; Pop, T; Zajkiewicz, K; Drużbicki, M; Mazur, D

2008-09-01

The aim of the present study was to determine the impact of food advertising in primary and secondary schools on the food purchasing habits of children. All forty-four primary and secondary schools in Rzeszow, Poland were included in the investigation; 15000 children attend primary and secondary schools in the region. Schools were visited by members of the research team, who filled in a questionnaire regarding the type of food products displayed or advertised in the school shop window and recorded the presence of direct corporate advertising in the proximity of the school shop. Shop owners were asked to fill in a form describing food purchases by students within the week preceding the visit. The school principal (or one of teachers) completed a form describing the school's policy regarding food advertising and the sponsorship of school activities by food companies. Recommended foods like milk, yogurts and fruit were offered by only 40.9 % of shops. There was a correlation between foods offered in the shop and foods purchased by students. In schools, 40.9% (95% CI 25.8, 56.0%) of shop windows displayed or advertised 'healthy' foods while 9.1% (95% CI 0.0, 17.9%) of shops displayed advertisements of food companies. The difference between display of 'healthy' food in shop windows and display of food on company advertisements was significant (likelihood ratio chi2 test, P < 0.04). Type of school (primary v. secondary) was not significant factor in advertising or purchasing pattern. Educational programmes should be introduced in schools with the aim of improving the understanding of nutritional principles among pupils, teachers and parents.

1. Southeast elevation, Roundhouse Machine Shop Extension, Southern Pacific Railroad ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Southeast elevation, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to northwest (90mm lens). Engine Stores Building (HAER NV-26-A) is at left, Oil House (HAER NV-26-B) is at right. - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

A&M. A&M building (TAN607). Camera facing east. From left to ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. A&M building (TAN-607). Camera facing east. From left to right, pool section, hot shop, cold shop, and machine shop. Biparting doors to hot shop are in open position behind shroud. Four rail tracks lead to hot shop and cold shop. Date: August 20, 1954. INEEL negative no. 11706 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

36. Historic photo of Building 202 interior, shows shop area ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

36. Historic photo of Building 202 interior, shows shop area with engineers assembling twenty-thousand-pound-thrust rocket engine, December 15, 1958. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-49343. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

Use patterns of a state health care price transparency web site: what do patients shop for?

PubMed

Mehrotra, Ateev; Brannen, Tyler; Sinaiko, Anna D

2014-01-01

To help people shop for lower cost providers, several states have created their own price transparency Web sites or passed legislation mandating health plans provide such information. New Hampshire's HealthCost Web site is on the forefront of such initiatives. Despite the growing interest in price transparency, little is known about such efforts, including how often these tools are used and for what reason. We examined the use of New Hampshire HealthCost over a 3-year period. Approximately 1% of the state's residents used the Web site, and the most common searches were for outpatient visits, magnetic resonance imaging (MRI) or computed tomography (CT) scans, and emergency department visits. The results provide a cautionary note on the level of potential interest among consumers in this information but may guide others on practically what are the most "shop-able" services for patients. © The Author(s) 2014.

The relationship between accessibility of healthcare facilities and medical care utilization among the middle-aged and elderly population in Taiwan.

PubMed

Yang, Ya-Ting; Iqbal, Usman; Ko, Hua-Lin; Wu, Chia-Rong; Chiu, Hsien-Tsai; Lin, Yi-Chieh; Lin, Wender; Elsa Hsu, Yi-Hsin

2015-06-01

The purpose of this study was to explore the relationship between accessibility of healthcare facilities and medical care utilization among the middle-aged and elderly population in Taiwan. Cross-sectional study from 2007 Taiwan Longitudinal Study on Ageing (TLSA) survey. Community-based study. A total of 4249 middle-aged and elderly subjects were recruited. None. Outpatient visits within 1 month, and hospitalization, emergency visits as well as to shop in pharmacy stores within 1 year, respectively. Adjusting for important confounding variables, the middle-aged and elderly with National Health Insurance (NHI) and commercial insurance compared with those with NHI alone tended to have outpatient visits. The middle-aged and elderly with longer time to access healthcare facilities were less likely to shop in pharmacy stores compared with those with <30 min. The middle-aged and elderly who perceived inconvenient to access health care tended to shop in pharmacy stores compared with those with perceived convenience. Our study of Taiwan's experience could provide a valuable lesson for countries that are planning to launch universal health insurance system, locate budgets in health care and transportation. The middle-aged and elderly who were facing more challenges in accessing health care, no matter in perceived accessibility or real time to access health care, had less outpatient visits and more drug stores shopping. Strategic policies are needed to improve accessibility in increasing patients' perception on access and escalating convenience of transportation system for improving accessibility. © The Author 2015. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

Influence of Social and Behavioural Characteristics of Users on Their Evaluation of Subjective Loudness and Acoustic Comfort in Shopping Malls

PubMed Central

Meng, Qi; Kang, Jian

2013-01-01

A large-scale subjective survey was conducted in six shopping malls in Harbin City, China, to determine the influence of social and behavioural characteristics of users on their evaluation of subjective loudness and acoustic comfort. The analysis of social characteristics shows that evaluation of subjective loudness is influenced by income and occupation, with correlation coefficients or contingency coefficients of 0.10 to 0.40 (p<0.05 or p<0.01). Meanwhile, evaluation of acoustic comfort evaluation is influenced by income, education level, and occupation, with correlation coefficients or contingency coefficients of 0.10 to 0.60 (p<0.05 or p<0.01). The effect of gender and age on evaluation of subjective loudness and acoustic comfort is statistically insignificant. The effects of occupation are mainly caused by the differences in income and education level, in which the effects of income are greater than that of education level. In terms of behavioural characteristics, evaluation of subjective loudness is influenced by the reason for visit, frequency of visit, and length of stay, with correlation coefficients or contingency coefficients of 0.10 to 0.40 (p<0.05 or p<0.01). Evaluation of acoustic comfort is influenced by the reason for visit to the site, the frequency of visit, length of stay, and also season of visit, with correlation coefficients of 0.10 to 0.30 (p<0.05 or p<0.01). In particular, users who are waiting for someone show lower evaluation of acoustic comfort, whereas users who go to shopping malls more than once a month show higher evaluation of acoustic comfort. On the contrary, the influence of the period of visit and the accompanying persons are found insignificant. PMID:23336003

KSC-04pd2086

NASA Image and Video Library

2004-10-05

KENNEDY SPACE CENTER, FLA. - Inside the KSC Engine Shop, Boeing-Rocketdyne technicians attach an overhead crane to the container enclosing the third Space Shuttle Main Engine for Discovery’s Return to Flight mission STS-114 arrives at the KSC Engine Shop aboard a trailer. The engine is returning from NASA’s Stennis Space Center in Mississippi where it underwent a hot fire acceptance test. Typically, the engines are installed on an orbiter in the Orbiter Processing Facility approximately five months before launch.

DEVELOPING PROPER ATTITUDES TOWARD EYE PROTECTION IN THE SCHOOL SHOP, A RESEARCH REPORT.

ERIC Educational Resources Information Center

SCHAEFER, CARL J.; AND OTHERS

TWO METHODS OF IMPLEMENTING SCHOOL SHOP EYE PROTECTION PROGRAMS WERE INVESTIGATED TO DETERMINE THE MORE EFFECTIVE FOR DEVELOPING FAVORABLE AND LASTING STUDENT ATTITUDES. TWO INDEPENDENT SAMPLES, TOTALING 76, WERE DRAWN FROM THE TENTH GRADE VOCATIONAL MACHINE SHOP STUDENTS AND FROM COLLEGE STUDENTS ENROLLED IN AN ENGINEERING MACHINE SHOP COURSE.…

MTRETR MAINTENANCE SHOP, TRA653. FLOOR PLAN FOR MEZZANINE: LUNCH AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MTR-ETR MAINTENANCE SHOP, TRA-653. FLOOR PLAN FOR MEZZANINE: LUNCH AND CONFERENCE ROOM, STORAGE AREA, OFFICES FOR FOREMEN, STENOS, ENGINEERS, DISPATCHER, WOMEN'S RESTROOM. HUMMEL HUMMEL & JONES 810-MTR-ETR-653-A-12, 2/1958. INL INDEX NO. 532-0653-00-381-102837, REV. 3. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Sale of cigarettes to children in Exeter

PubMed Central

Bradley, N. C. A.

1983-01-01

The sale of cigarettes to children in Exeter was investigated. Thirty-seven local shops were visited and the salespeople interviewed: 28 incorrectly understood the relevant law and seven had no knowledge of it. Only seven people said they tried to keep within the law. Only two of the 37 shops were displaying the Tobacco Advisory Council's explanatory notice sent to every cigarette retailer in the United Kingdom in 1981. Every shop sold cigarettes. It is proposed that: a notice explaining the law be displayed in all cigarette retailing shops; the tobacconist's licence (abolished in 1963) be reintroduced; and local civic and health authorities combine to educate retailers, their staff and the public. PMID:6631800

The Associations between Yelp Online Reviews and Vape Shops Closing or Remaining Open One Year Later.

PubMed

Kong, Grace; Unger, Jennifer; Baezconde-Garbanati, Lourdes; Sussman, Steve

2017-01-01

Vape shops are popular brick-and-mortar stores that sell e-cigarette products but are not understood well. Previous analysis of Yelp reviews of vape shops located in various ethnic neighborhoods in Los Angeles, California in 2014 identified characteristics of vape shop as delineated by consumers. In this study, we assessed the associations between these characteristics and vape shops going out of business in 2015. Content analysis of Yelp reviews of 72 vape shops in 2014 identified 1) general characteristics of the reviews/reviewers, 2) vape shop, staff, and marketing attributes, 3) physical environment, and 4) health claims. In 2015, in-person visits confirmed that 22% of these vape shops closed permanently. We analyzed whether characteristics/attributes identified in 2014 associated with stores remaining open (n = 56) or permanently closing (n = 16) in 2015. Univariate findings showed that open vape shops relative to closed shops had greater 1) number of reviews, 2) rebuilds/fixings, 3) ratings of staff attributes as "helpful/patient/respectful," and 4) report of the physical environment as "bar type." Bar type vape shops and those with rebuilding/fixing capabilities were associated with staying open, suggesting the popularity of these attributes. Yelp consumer reviews is a useful research tool to identify consumer-determined important sustaining attributes of vape shops and may be used to identify aspects of enduring shops that need regulations.

View north of west gallery of inside machine shop 36; ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View north of west gallery of inside machine shop 36; the gallery housed turret, engine and toolroom lathes, small milling machines and drill presses used for machining small parts. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structure Shop, League Island, Philadelphia, Philadelphia County, PA

Visiting Santa: a supplemental view.

PubMed

Trinkaus, John

2008-12-01

Four recent informal successive yearly enquiries of the emotions of 1,050 children (total) immediately before their visit with Santa Claus at a shopping mall suggested that about 80% displayed facial expressions, judged by an observer, as indicating indifference. To investigate possible change in emotions of children immediately after their visit with Santa, this study was conducted in 2007. Of the 280 exiting children observed, about 60% appeared to be indifferent.

119. ARAI Shop and maintenance (ARA627) building sections and details ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

119. ARA-I Shop and maintenance (ARA-627) building sections and details of interior mesh partitions. Norman Engineering Company 961-area/SF-627-A-3. Date: January 1959. Ineel index code no. 068-0627-00-613-102761. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

117. ARAI Shop and maintenance (ARA627) building roof and floor ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

117. ARA-I Shop and maintenance (ARA-627) building roof and floor plan. Includes room finish and equipment schedule. Norman Engineering Company 961-area/SF-627-A-1. Date: January 1959. Ineel index code no. 068-0627-00-613-102759. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

General view of the shop floor looking north in the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of the shop floor looking north in the Vertical Processing Area of the Space Shuttle Main Engine (SSME) Processing Facility at Kennedy Space Center. SSME number 2061 is in the foreground. - Space Transportation System, Space Shuttle Main Engine, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

Production Machine Shop Employment Competencies. Part Three: The Engine Lathe.

ERIC Educational Resources Information Center

Bishart, Gus; Werner, Claire

Competencies for production machine shop are provided for the third of four topic areas: the engine lathe. Each competency appears in a one-page format. It is presented as a goal statement followed by one or more "indicator" statements, which are performance objectives describing an ability that, upon attainment, will establish…

Waste-minimization opportunity assessment: Naval Undersea Warfare Engineering Station, Keyport, Washington. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The report describes the application of EPA's waste minimization assessment procedures to a torpedo maintenance facility at the Naval Undersea Warfare Engineering Station, Keyport, WA. The assessment focused on the Mark 48 shop and the Mark 46 shop. These shops service the Mark 48 torpedo and the Mark 46 torpedo respectively. The five waste minimization options presented are volume reduction of contaminated clothing, automated cleaning of parts, automated fuel tank draining, modification of the deep sink draining schedule and recycling of mineral spirits.

The availability of novelty sweets within high school localities.

PubMed

Aljawad, A; Morgan, M Z; Rees, J S; Fairchild, R

2016-06-10

Background Reducing sugar consumption is a primary focus of current global public health policy. Achieving 5% of total energy from free sugars will be difficult acknowledging the concentration of free sugars in sugar sweetened beverages, confectionery and as hidden sugars in many savoury items. The expansion of the novelty sweet market in the UK has significant implications for children and young adults as they contribute to dental caries, dental erosion and obesity.Objective To identify the most available types of novelty sweets within the high school fringe in Cardiff, UK and to assess their price range and where and how they were displayed in shops.Subjects and methods Shops within a ten minute walking distance around five purposively selected high schools in the Cardiff aea representing different levels of deprivation were visited. Shops in Cardiff city centre and three supermarkets were also visited to identify the most commonly available novelty sweets.Results The ten most popular novelty sweets identified in these scoping visits were (in descending order): Brain Licker, Push Pop, Juicy Drop, Lickedy Lips, Big Baby Pop, Vimto candy spray, Toxic Waste, Tango candy spray, Brain Blasterz Bitz and Mega Mouth candy spray. Novelty sweets were located on low shelves which were accessible to all age-groups in 73% (14 out of 19) of the shops. Novelty sweets were displayed in the checkout area in 37% (seven out of 19) shops. The price of the top ten novelty sweets ranged from 39p to £1.Conclusion A wide range of acidic and sugary novelty sweets were easily accessible and priced within pocket money range. Those personnel involved in delivering dental and wider health education or health promotion need to be aware of recent developments in children's confectionery. The potential effects of these novelty sweets on both general and dental health require further investigation.

48 CFR 227.7107-1 - Architectural designs and data clauses for architect-engineer or construction contracts.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Government, in solicitations and contracts. (c) The Government shall obtain unlimited rights in shop drawings for construction. In solicitations and contracts calling for delivery of shop drawings, include the clause at 252.227-7033, Rights in Shop Drawings. ...

48 CFR 227.7107-1 - Architectural designs and data clauses for architect-engineer or construction contracts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Government, in solicitations and contracts. (c) The Government shall obtain unlimited rights in shop drawings for construction. In solicitations and contracts calling for delivery of shop drawings, include the clause at 252.227-7033, Rights in Shop Drawings. ...

48 CFR 227.7107-1 - Architectural designs and data clauses for architect-engineer or construction contracts.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Government, in solicitations and contracts. (c) The Government shall obtain unlimited rights in shop drawings for construction. In solicitations and contracts calling for delivery of shop drawings, include the clause at 252.227-7033, Rights in Shop Drawings. ...

48 CFR 227.7107-1 - Architectural designs and data clauses for architect-engineer or construction contracts.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Government, in solicitations and contracts. (c) The Government shall obtain unlimited rights in shop drawings for construction. In solicitations and contracts calling for delivery of shop drawings, include the clause at 252.227-7033, Rights in Shop Drawings. ...

48 CFR 227.7107-1 - Architectural designs and data clauses for architect-engineer or construction contracts.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Government, in solicitations and contracts. (c) The Government shall obtain unlimited rights in shop drawings for construction. In solicitations and contracts calling for delivery of shop drawings, include the clause at 252.227-7033, Rights in Shop Drawings. ...

The Associations between Yelp Online Reviews and Vape Shops Closing or Remaining Open One Year Later

PubMed Central

Kong, Grace; Unger, Jennifer; Baezconde-Garbanati, Lourdes; Sussman, Steve

2017-01-01

INTRODUCTION Vape shops are popular brick-and-mortar stores that sell e-cigarette products but are not understood well. Previous analysis of Yelp reviews of vape shops located in various ethnic neighborhoods in Los Angeles, California in 2014 identified characteristics of vape shop as delineated by consumers. In this study, we assessed the associations between these characteristics and vape shops going out of business in 2015. METHODS Content analysis of Yelp reviews of 72 vape shops in 2014 identified 1) general characteristics of the reviews/reviewers, 2) vape shop, staff, and marketing attributes, 3) physical environment, and 4) health claims. In 2015, in-person visits confirmed that 22% of these vape shops closed permanently. We analyzed whether characteristics/attributes identified in 2014 associated with stores remaining open (n = 56) or permanently closing (n = 16) in 2015. RESULTS Univariate findings showed that open vape shops relative to closed shops had greater 1) number of reviews, 2) rebuilds/fixings, 3) ratings of staff attributes as “helpful/patient/respectful,” and 4) report of the physical environment as “bar type.” CONCLUSIONS Bar type vape shops and those with rebuilding/fixing capabilities were associated with staying open, suggesting the popularity of these attributes. Yelp consumer reviews is a useful research tool to identify consumer-determined important sustaining attributes of vape shops and may be used to identify aspects of enduring shops that need regulations. PMID:29057379

An evaluation of retrofit engineering control interventions to reduce perchloroethylene exposures in commercial dry-cleaning shops.

PubMed

Earnest, G Scott; Ewers, Lynda M; Ruder, Avima M; Petersen, Martin R; Kovein, Ronald J

2002-02-01

Real-time monitoring was used to evaluate the ability of engineering control devices retrofitted on two existing dry-cleaning machines to reduce worker exposures to perchloroethylene. In one dry-cleaning shop, a refrigerated condenser was installed on a machine that had a water-cooled condenser to reduce the air temperature, improve vapor recovery, and lower exposures. In a second shop, a carbon adsorber was retrofitted on a machine to adsorb residual perchloroethylene not collected by the existing refrigerated condenser to improve vapor recovery and reduce exposures. Both controls were successful at reducing the perchloroethylene exposures of the dry-cleaning machine operator. Real-time monitoring was performed to evaluate how the engineering controls affected exposures during loading and unloading the dry-cleaning machine, a task generally considered to account for the highest exposures. The real-time monitoring showed that dramatic reductions occurred in exposures during loading and unloading of the dry-cleaning machine due to the engineering controls. Peak operator exposures during loading and unloading were reduced by 60 percent in the shop that had a refrigerated condenser installed on the dry-cleaning machine and 92 percent in the shop that had a carbon adsorber installed. Although loading and unloading exposures were dramatically reduced, drops in full-shift time-weighted average (TWA) exposures were less dramatic. TWA exposures to perchloroethylene, as measured by conventional air sampling, showed smaller reductions in operator exposures of 28 percent or less. Differences between exposure results from real-time and conventional air sampling very likely resulted from other uncontrolled sources of exposure, differences in shop general ventilation before and after the control was installed, relatively small sample sizes, and experimental variability inherent in field research. Although there were some difficulties and complications with installation and maintenance of the engineering controls, this study showed that retrofitting engineering controls may be a feasible option for some dry-cleaning shop owners to reduce worker exposures to perchloroethylene. By installing retrofit controls, a dry-cleaning facility can reduce exposures, in some cases dramatically, and bring operators into compliance with the Occupational Safety and Health Administration (OSHA) peak exposure limit of 300 ppm. Retrofit engineering controls are also likely to enable many dry-cleaning workers to lower their overall personal TWA exposures to perchloroethylene.

A&M. TAN607. Sections for second phase expansion: engine maintenance, machine, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607. Sections for second phase expansion: engine maintenance, machine, and welding shops; high bay assembly shop, chemical cleaning room (decontamination). Details of sliding door hoods. Approved by INEEL Classification Office for public release. Ralph M. Parsons 1299-5-ANP/GE-3-607-A 109. Date: August 1956. INEEL index code no. 034-0607-00-693-107169 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

Managing a cluster outbreak of psittacosis in Belgium linked to a pet shop visit in The Netherlands.

PubMed

DE Boeck, C; Dehollogne, C; Dumont, A; Spierenburg, M; Heijne, M; Gyssens, I; VAN DER Hilst, J; Vanrompay, D

2016-06-01

In July 2013, a Belgian couple were admitted to hospital because of pneumonia. Medical history revealed contact with birds. Eleven days earlier, they had purchased a lovebird in a pet shop in The Netherlands. The bird became ill, with respiratory symptoms. The couple's daughter who accompanied them to the pet shop, reported similar symptoms, but was travelling abroad. On the suspicion of psittacosis, pharyngeal swabs from the couple were taken and sent to the Belgian reference laboratory for psittacosis. Culture and nested polymerase chain reaction (PCR) tests were positive for the presence of Chlamydia psittaci, and ompA genotyping indicated genotype A in both patients. The patients were treated with doxycycline and the daughter started quinolone therapy; all three recovered promptly. Psittacosis is a notifiable disease in Belgium and therefore local healthcare authorities were informed. They contacted their Dutch colleagues, who visited the pet shop. Seven pooled faecal samples were taken and analysed using PCR by the Dutch national reference laboratory for notifiable animal diseases for the presence of Chlamydia psittaci. Four (57%) samples tested positive, genotyping revealed genotype A. Enquiring about exposure to pet birds is essential when patients present with pneumonia. Reporting to health authorities, even across borders, is warranted to prevent further spread.

40 CFR 89.328 - Inlet and exhaust restrictions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... at maximum air flow, as specified by the engine manufacturer for a clean air cleaner. A system representative of the installed engine may be used. In other cases a test shop system may be used. (2) The... cases a test shop system may be used. [59 FR 31335, June 17, 1994. Redesignated and amended at 63 FR...

40 CFR 89.328 - Inlet and exhaust restrictions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... at maximum air flow, as specified by the engine manufacturer for a clean air cleaner. A system representative of the installed engine may be used. In other cases a test shop system may be used. (2) The... cases a test shop system may be used. [59 FR 31335, June 17, 1994. Redesignated and amended at 63 FR...

40 CFR 89.328 - Inlet and exhaust restrictions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... at maximum air flow, as specified by the engine manufacturer for a clean air cleaner. A system representative of the installed engine may be used. In other cases a test shop system may be used. (2) The... cases a test shop system may be used. [59 FR 31335, June 17, 1994. Redesignated and amended at 63 FR...

40 CFR 89.328 - Inlet and exhaust restrictions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... at maximum air flow, as specified by the engine manufacturer for a clean air cleaner. A system representative of the installed engine may be used. In other cases a test shop system may be used. (2) The... cases a test shop system may be used. [59 FR 31335, June 17, 1994. Redesignated and amended at 63 FR...

40 CFR 89.328 - Inlet and exhaust restrictions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... at maximum air flow, as specified by the engine manufacturer for a clean air cleaner. A system representative of the installed engine may be used. In other cases a test shop system may be used. (2) The... cases a test shop system may be used. [59 FR 31335, June 17, 1994. Redesignated and amended at 63 FR...

Performance optimization of an online retailer by a unique online resilience engineering algorithm

NASA Astrophysics Data System (ADS)

Azadeh, A.; Salehi, V.; Salehi, R.; Hassani, S. M.

2018-03-01

Online shopping has become more attractive and competitive in electronic markets. Resilience engineering (RE) can help such systems divert to the normal state in case of encountering unexpected events. This study presents a unique online resilience engineering (ORE) approach for online shopping systems and customer service performance. Moreover, this study presents a new ORE algorithm for the performance optimisation of an actual online shopping system. The data are collected by standard questionnaires from both expert employees and customers. The problem is then formulated mathematically using data envelopment analysis (DEA). The results show that the design process which is based on ORE is more efficient than the conventional design approach. Moreover, on-time delivery is the most important factor from the personnel's perspective. In addition, according to customers' view, trust, security and good quality assurance are the most effective factors during transactions. This is the first study that introduces ORE for electronic markets. Second, it investigates impact of RE on online shopping through DEA and statistical methods. Third, a practical approach is employed in this study and it may be used for similar online shops. Fourth, the results are verified and validated through complete sensitivity analysis.

Aft Engine shop worker removes a heat shield on Columbia's main engines

NASA Technical Reports Server (NTRS)

2002-01-01

KENNEDY SPACE CENTER, FLA. -- Doug Buford (top), with the Aft Engine shop, along with another worker, removes a heat shield on one of Columbia's engines. After small cracks were discovered on the LH2 Main Propulsion System (MPS) flow liners in two other orbiters, program managers decided to move forward with inspections on Columbia before clearing it for flight on STS-107. After removal of the heat shields, the three main engines will be removed. Inspections of the flow liners will follow. The July 19 launch of Columbia on STS-107 has been delayed a few weeks

Tobacco display and brand communication at the point of sale: implications for adolescent smoking behaviour.

PubMed

Spanopoulos, Dionysis; Britton, John; McNeill, Ann; Ratschen, Elena; Szatkowski, Lisa

2014-01-01

In England, point-of-sale (PoS) displays in larger shops were prohibited in April 2012, with an exemption for smaller retailers until 2015. The aim of this study was to examine the association between tobacco displays and brand communication at the PoS and adolescent smoking behaviour, and to assess the potential benefits likely to accrue from this legislation. Self-completion questionnaire survey in students aged 11-15 years in March 2011. The odds of ever-smoking doubled for those visiting shops almost daily relative to less than once a week (OR 2.23, 95% CI 1.40 to 3.55), and susceptibility increased by around 60% (OR 1.62, 95% CI 1.25 to 2.10). Noticing tobacco on display every time during store visits increased the odds of susceptibility more than threefold compared with never noticing tobacco (OR 3.15, 95% CI 1.52 to 6.54). For each additional tobacco brand recognised at the PoS, the adjusted odds of being an ever-smoker increased by 5% (OR 1.05, 95% CI 1.03 to 1.06) and of susceptibility by 4% (OR 1.04, 95% CI 1.02 to 1.05). The association between frequency of visiting stores and susceptibility was predominantly due to exposure in small shops. Exposure to and awareness of PoS displays and brands in displays were associated with smoking susceptibility. The association between PoS display exposure and smoking susceptibility was predominantly due to exposure in small shops. These findings suggest that a one-off, comprehensive tobacco display ban is the recommended approach for countries considering a display ban.

Tobacco display and brand communication at the point of sale: implications for adolescent smoking behaviour

PubMed Central

Spanopoulos, Dionysis; Britton, John; McNeill, Ann; Ratschen, Elena; Szatkowski, Lisa

2014-01-01

Background In England, point-of-sale (PoS) displays in larger shops were prohibited in April 2012, with an exemption for smaller retailers until 2015. The aim of this study was to examine the association between tobacco displays and brand communication at the PoS and adolescent smoking behaviour, and to assess the potential benefits likely to accrue from this legislation. Methods Self-completion questionnaire survey in students aged 11–15 years in March 2011. Results The odds of ever-smoking doubled for those visiting shops almost daily relative to less than once a week (OR 2.23, 95% CI 1.40 to 3.55), and susceptibility increased by around 60% (OR 1.62, 95% CI 1.25 to 2.10). Noticing tobacco on display every time during store visits increased the odds of susceptibility more than threefold compared with never noticing tobacco (OR 3.15, 95% CI 1.52 to 6.54). For each additional tobacco brand recognised at the PoS, the adjusted odds of being an ever-smoker increased by 5% (OR 1.05, 95% CI 1.03 to 1.06) and of susceptibility by 4% (OR 1.04, 95% CI 1.02 to 1.05). The association between frequency of visiting stores and susceptibility was predominantly due to exposure in small shops. Conclusions Exposure to and awareness of PoS displays and brands in displays were associated with smoking susceptibility. The association between PoS display exposure and smoking susceptibility was predominantly due to exposure in small shops. These findings suggest that a one-off, comprehensive tobacco display ban is the recommended approach for countries considering a display ban. PMID:23449398

4. Contextual view to east of the Southern Pacific Railroad ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. Contextual view to east of the Southern Pacific Railroad Carlin Shops buildings at Carlin, Nevada. The Roundhouse Machine Shop Extension is at left, Oil House at center background, and Engine Stores Building at right (135mm lens). - Southern Pacific Railroad, Carlin Shops, Foot of Sixth Street, Carlin, Elko County, NV

3. Contextual view to south of the Southern Pacific Railroad ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. Contextual view to south of the Southern Pacific Railroad Carlin Shops buildings at Carlin, Nevada. The Oil House is at left, Engine Stores at center background, and Roundhouse Machine Shop Extension at right (90mm lens). - Southern Pacific Railroad, Carlin Shops, Foot of Sixth Street, Carlin, Elko County, NV

Outpatient-shopping behavior and survival rates in newly diagnosed cancer patients.

PubMed

Chiou, Shang-Jyh; Wang, Shiow-Ing; Liu, Chien-Hsiang; Yaung, Chih-Liang

2012-09-01

To evaluate the appropriateness of the definition of outpatient-shopping behavior in Taiwanese patients. Linked study of 3 databases (Taiwan Cancer Registry, National Health Insurance [NHI] claim database, and death registry database). Outpatient shopping behavior was defined as making at least 4 or 5 physician visits to confirm a cancer diagnosis. We analyzed patient-related factors and the 5-year overall survival rate of the outpatient-shopping group compared with a nonshopping group. Using the household registration database and NHI database, we determined the proportion of outpatient shopping, characteristics of patients who did and did not shop for outpatient therapy, time between diagnosis and start of regular treatment, and medical service utilization in the shopping versus the nonshopping group. Patients with higher incomes were significantly more likely to shop for outpatient care. Patients with higher comorbidity scores were 1.4 times more likely to shop for outpatient care than patients with lower scores. Patients diagnosed with more advanced cancer were more likely to shop than those who were not. Patients might be more trusting of cancer diagnoses given at higher-level hospitals. The nonshopping groups had a longer duration of survival over 5 years. Health authorities should consider charging additional fees after a specific outpatient- shopping threshold is reached to reduce this behavior. The government may need to reassess the function of the medical sources network by shrinking it from the original 4 levels to 2 levels, or by enhancing the referral function among different hospital levels.

118. ARAI Shop and maintenance (ARA627) building elevations of north, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

118. ARA-I Shop and maintenance (ARA-627) building elevations of north, south, east, and west sides and other details of door and window types. Norman Engineering Company 961-area/SF-627-A-2. Date: January 1959. Ineel index code no. 068-0627-00-613-102760. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

General view of the shop floor looking north in the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view of the shop floor looking north in the Vertical Processing Area of the Space Shuttle Main Engine (SSME) Processing Facility at Kennedy Space Center. SSME number 2061's nozzle is being inspected by an SSME technician in the foreground. - Space Transportation System, Space Shuttle Main Engine, Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

18. VIEW OF ENGINEERING CONTROLS USED IN THE BERYLLIUM SHOP ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. VIEW OF ENGINEERING CONTROLS USED IN THE BERYLLIUM SHOP TO REDUCE EMPLOYEE EXPOSURE. THE LATHE IS COVERED BY A HOOD WITH A SEPARATE AIR-HANDLING SYSTEM. PRECISION EQUIPMENT IS CONTROLLED DIGITALLY. (11/13/89) - Rocky Flats Plant, Non-Nuclear Production Facility, South of Cottonwood Avenue, west of Seventh Avenue & east of Building 460, Golden, Jefferson County, CO

Summary of the 1987 soil sampling effort at the Idaho National Engineering Laboratory Test Reactor Area Paint Shop Ditch

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, T.R.; Knight, J.L.; Hertzler, C.L.

1989-08-01

Sampling of the Test Reactor Area (TRA) Paint Shop Ditch at the Idaho National Engineering Laboratory was initiated in compliance with the Interim Agreement between the Department of Energy (DOE) and the Environmental Protection Agency (EPA). Sampling of the TRA Paint Shop Ditch was done as part of the Action Plan to achieve and maintain compliance with the Resource Conservation and Recovery Act (RCRA) and applicable regulations. It is the purpose of this document to provide a summary of the July 6, 1987 sampling activities that occurred in ditch west of Building TRA-662, which housed the TRA Paint Shop inmore » 1987. This report will give a narrative description of the field activities, locations of collected samples, discuss the sampling procedures and the chemical analyses. Also included in the scope of this report is to bring together data and reports on the TRA Paint Shop Ditch for archival purposes. 6 refs., 10 figs., 8 tabs.« less

Aft Engine shop worker removes a heat shield on Columbia's main engines

NASA Technical Reports Server (NTRS)

2002-01-01

KENNEDY SPACE CENTER, FLA. - Doug Buford, with the Aft Engine shop, works at removing a heat shield on Columbia, in the Orbiter Processing Facility. After small cracks were discovered on the LH2 Main Propulsion System (MPS) flow liners in two other orbiters, program managers decided to move forward with inspections on Columbia before clearing it for flight on STS-107. After removal of the heat shields, the three main engines will be removed. Inspections of the flow liners will follow. The July 19 launch of Columbia on STS-107 has been delayed a few weeks

Aft Engine shop worker removes a heat shield on Columbia's main engines

NASA Technical Reports Server (NTRS)

2002-01-01

KENNEDY SPACE CENTER, FLA. -- Doug Buford, with the Aft Engine shop, works at removing a heat shield on Columbia, in the Orbiter Processing Facility. After small cracks were discovered on the LH2 Main Propulsion System (MPS) flow liners in two other orbiters, program managers decided to move forward with inspections on Columbia before clearing it for flight on STS-107. After removal of the heat shields, the three main engines will be removed. Inspections of the flow liners will follow. The July 19 launch of Columbia on STS-107 has been delayed a few weeks

NACA Lewis Researcher and Technicians Discuss a Test Setup

NASA Image and Video Library

1956-12-21

Researcher Bill Reiwaldt discusses the preparations for a test in the Altitude Wind Tunnel with technicians Jack Wagner and Dick Golladay at the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory. Research engineers developed ideas for tests that were often in response to requests from the military or aircraft industry. Arrangements were made to obtain an engine for the study and to transport it to the Cleveland laboratory. The engine was brought into the facility’s shop area, where it was readied for investigation. It was common for several different engines to be worked on simultaneously in the shop. The researcher would discuss the engine and the test objectives with the Test Installation Division and the facility’s technicians. The operations team would handle the installation of the instrumentation and fitting the test into the facility’s schedule. Upon completion of the previous test, the engine was removed. The next engine was lifted by an overhead crane and transported from the shop to the test section. The engine was connected to the measurement devices and fuel and oil supply lines. Engines were tested over numerous runs under varying conditions and with variations on the configuration. The findings and test procedure were then described in research or technical memorandums and distributed to industry.

2. Contextual view to westsouthwest of Southern Pacific Railroad Carlin ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. Contextual view to west-southwest of Southern Pacific Railroad Carlin Shops buildings at Carlin, Nevada, taken from the pedestrian bridge visible in photo 1. The Engine Stores Building is at left center, Oil House at center, and Roundhouse Machine Shop Extension at right (90mm lens). - Southern Pacific Railroad, Carlin Shops, Foot of Sixth Street, Carlin, Elko County, NV

FME Carpentry Shop Keeps Facility in Good Repair | Poster

Cancer.gov

By Peggy Pearl, Contributing Writer Did you know that what most people call the Carpentry Shop at Facilities Maintenance and Engineering (FME) is actually made up of the three crafts, woodcrafting, painting, and locksmithing?  On any given day, throughout the Frederick National Laboratory campus, you may find shop staff utilizing an assortment of tools and a wide range of

View south of hydraulic hammer in boilermakers shop (probably the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View south of hydraulic hammer in boilermakers shop (probably the oldest piece of equipment in the yard, originally powered by steam) nameplate: United Engineers and FDRY. Co. Pittsburgh, Pa, USA Davy Brothers LTD. Patents - Aug 1, 1905, Feb, 1901, Sept 8, 1908 - 10000 lbs. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structure Shop, League Island, Philadelphia, Philadelphia County, PA

21. Generator Room (basement beneath Blacksmith Shop): view looking north ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. Generator Room (basement beneath Blacksmith Shop): view looking north showing remains of 1923 six-cylinder Studebaker engine and a dynamo - Ben Thresher's Mill, State Aid No. 1, Barnet, Caledonia County, VT

Injuries sustained by students in shop class.

PubMed

Knight, S; Junkins, E P; Lightfoot, A C; Cazier, C F; Olson, L M

2000-07-01

Injuries in the school environment are a serious public health problem. Injuries occurring within the school shop class are a part of this problem that has received little to no attention. The purpose of our study was to describe the epidemiology of shop class injuries in Utah public schools for the years 1992-1996. Utah statewide grades 7 through 12 school injury data for 1992-1996 were used. The data were generated from a standardized Student Injury Report form completed by school personnel immediately after the occurrence of an injury on school premises that: 1) caused loss of at least one half of a day of school; and/or 2) warranted medical attention and treatment. Shop injuries were defined as injuries that occurred in industrial art classes, vocational educational classes, or automotive classes. To determine the medical outcome and hospital charges associated with shop class injuries, we linked the Student Injury Report database to Utah statewide emergency department (ED) records (available for 1996 only), and to Utah statewide hospital inpatient discharge records (1992-1996). During 1992-1996, 14 133 students in grades 7 through 12 were injured at school, of which 1008 (7.1%) were injured during a shop class. The majority (88. 4%) of shop injuries involved equipment use. Equipment was misused in 37.9% and malfunctioned in 3.5% of the incidents. The leading injuries reported for shop equipment were lacerations (70.9%), burns (6.0%), and abrasions (4.6%), whereas the leading for nonequipment injuries were lacerations (45.4%), fractures (9.2%), and pain/tenderness (6.7%). In 1996, 167 students were injured in a shop class and 45 (26.9%) visited an ED as a result of the shop injury. Equipment was a factor in 88.9% of the shop injuries admitted to the ED. Table saws (15.0%), other saws (15.0%), and band saws (12.5%) were involved in nearly one half of the equipment injuries. Equipment was misused in 44.7% and malfunctioned in 10.5% of the incidents resulting in an ED visit. The majority (64.4%) of students sustained an open wound injury. The total ED charges were $16 571. For 1992-1996, 1008 students were injured in a shop class, 7 (.7%) required inpatient hospital care. Six of the students were injured using a table saw and 1 sustained injuries attributable to automotive cleaning fluid. Equipment was used improperly in 4 of the table saw injuries. Six of the students sustained hand injuries, with 3 suffering a traumatic amputation of a finger or thumb. The total inpatient charges were $26 747. School shop injuries have a great impact on students, their families, and schools because of the loss of productivity for the student and the financial impact. Many of the injuries are preventable. These findings stress the need for school administrators, teachers, and students to develop and improve safety policies and practices in school shop classes. In addition, the findings may provide useful information to pediatricians and enable them to better inform patients of risks in school shop classes.

5. VIEW OF 20TON STEAMPOWERED FORGE HAMMER Manufactured by Chambersburg ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. VIEW OF 20-TON STEAM-POWERED FORGE HAMMER Manufactured by Chambersburg Engineering Company, Chambersburg, Pennsylvania - Juniata Shops, Blacksmith Shop No. 1, East of Fourth Avenue at Second Street, Altoona, Blair County, PA

Women who doctor shop for prescription drugs.

PubMed

Worley, Julie; Thomas, Sandra P

2014-04-01

Doctor shopping is a term used to describe a form of diversion of prescription drugs when patients visit numerous prescribers to obtain controlled drugs for illicit use. Gender differences exist in regard to prescription drug abuse and methods of diversion. The purpose of this phenomenological study guided by the existential philosophy of Merleau-Ponty was to understand the lived experience of female doctor shoppers. Interviews were conducted with 14 women, which were recorded, transcribed, and analyzed. Included in the findings are figural aspects of the participants' experience of doctor shopping related to the existential grounds of world, time, body, and others. Four themes emerged from the data: (a) feeding the addiction, (b) networking with addicts, (c) playing the system, and (d) baiting the doctors. The findings suggest several measures that nurses can take to reduce the incidence of doctor shopping and to provide better care for female doctor shoppers.

Present Food Shopping Habits in the Spanish Adult Population: A Cross-Sectional Study.

PubMed

Achón, María; Serrano, María; García-González, Ángela; Alonso-Aperte, Elena; Varela-Moreiras, Gregorio

2017-05-18

Information on grocery shopping patterns is one key to understanding dietary changes in recent years in Spain. This report presents an overview of Spanish food shopping patterns in the adult population. A cross-sectional, nationally representative telephone survey was conducted in Spain. Individuals were asked about food shopping responsibility roles, types of visited food stores, time spent, additional behaviors while shopping, the influence of marketing/advertising and, in particular, fresh produce shopping profile. Binary logistic regression models were developed. The final random sample included 2026 respondents aged ≥18 years, of which 1223 were women and 803 were men. Women reported being in charge of most of the food shopping activities. Looking for best prices, more than looking for healthy or sustainable foods, seemed to be a general behavior. Supermarkets were the preferred retail spaces for food price consideration, convenience, variety and availability. Fresh produce shopping was associated with traditional markets and neighborhood stores in terms of reliance and personalized service. It is essential to highlight the importance of the role played by women. They are the main supporters concerned in preserving adequate dietary habits. Economic factors, more than health or food sustainability, are commonly considered by the population. Traditional markets may play an important role in preserving some healthy dietary habits of the Mediterranean food culture in Spain.

Present Food Shopping Habits in the Spanish Adult Population: A Cross-Sectional Study

PubMed Central

Achón, María; Serrano, María; García-González, Ángela; Alonso-Aperte, Elena; Varela-Moreiras, Gregorio

2017-01-01

Information on grocery shopping patterns is one key to understanding dietary changes in recent years in Spain. This report presents an overview of Spanish food shopping patterns in the adult population. A cross-sectional, nationally representative telephone survey was conducted in Spain. Individuals were asked about food shopping responsibility roles, types of visited food stores, time spent, additional behaviors while shopping, the influence of marketing/advertising and, in particular, fresh produce shopping profile. Binary logistic regression models were developed. The final random sample included 2026 respondents aged ≥18 years, of which 1223 were women and 803 were men. Women reported being in charge of most of the food shopping activities. Looking for best prices, more than looking for healthy or sustainable foods, seemed to be a general behavior. Supermarkets were the preferred retail spaces for food price consideration, convenience, variety and availability. Fresh produce shopping was associated with traditional markets and neighborhood stores in terms of reliance and personalized service. It is essential to highlight the importance of the role played by women. They are the main supporters concerned in preserving adequate dietary habits. Economic factors, more than health or food sustainability, are commonly considered by the population. Traditional markets may play an important role in preserving some healthy dietary habits of the Mediterranean food culture in Spain. PMID:28524085

'No, the government doesn't need to, it's already self-regulated': a qualitative study among vape shop operators on perceptions of electronic vapor product regulation.

PubMed

Nayak, Pratibha; Barker, Dianne C; Huang, Jidong; Kemp, Catherine B; Wagener, Theodore L; Chaloupka, Frank

2018-03-26

While the market share of electronic vapor products (EVPs), sold primarily through vape shops and other outlets, has increased rapidly, these products remained largely unregulated until 2016. This study, conducted prior to announcement of the deeming regulations, provides insights into vape shop operator attitudes toward potential government regulations of EVPs. In 2015, we conducted 37 in-person interviews of vape shop operators across nine US cities. Shops were identified through extensive web-searches. We used QSR International's NVivo 11 qualitative data analysis software to analyze the transcripts. Many vape shop operators viewed regulations requiring safe production of e-liquids, child-resistant bottles and listing e-juice ingredients as acceptable. They disagreed with the elimination of free samples and bans on flavored e-liquid sales, which generate significant revenue for their stores. Many held negative perceptions of pre-market review of new product lines and EVP-specific taxes. All agreed that EVPs should not be sold to minors, but most felt that owners should not be fined if minors visited vape shops. Findings from this study offer insights into the acceptability of proposed regulations, as well as barriers to effective regulation implementation.

Photocopy of drawing, May 22, 1919. Machine shop alterations, east ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing, May 22, 1919. Machine shop alterations, east wing, first and second floor plans and section. Watertown arsenal engineering division. Drawing number 9222. - Watertown Arsenal, Building No. 313, Talcott Avenue, Watertown, Middlesex County, MA

Consultation behaviour of doctor-shopping patients and factors that reduce shopping.

PubMed

Ohira, Yoshiyuki; Ikusaka, Masatomi; Noda, Kazutaka; Tsukamoto, Tomoko; Takada, Toshihiko; Miyahara, Masahito; Funakoshi, Hiraku; Basugi, Ayako; Keira, Katsunori; Uehara, Takanori

2012-04-01

To investigate the subsequent behaviour of doctor-shopping patients (defined as those attending multiple hospitals for the same complaint) who consulted our department and factors related to cessation of doctor shopping. Patients who presented without referral to the Department of General Medicine at Chiba University Hospital in Japan (our department) completed a questionnaire at their first visit. A follow-up questionnaire was also sent to them in order to assess doctor shopping after 3 months. Then items in the questionnaires were investigated for significant differences between patients who continued or stopped doctor shopping. Logistic regression analysis was performed with items showing a significant difference between patients who stopped doctor shopping and those who continued it, in order to identify independent determinants of the cessation of shopping. A total of 978 patients who presented spontaneously to our department consented to this study, and 929 patients (95.0%) completed questionnaires correctly. Among them, 203 patients (21.9%) were identified as doctor shoppers. The follow-up survey was completed correctly by 138 patients (68.0%). Among them, 25 patients (18.1%) were found to have continued doctor shopping, which was a significantly lower rate than before (P < 0.001). Logistic regression analysis selected the following factors as independent determinants of the cessation of doctor shopping: 'confirmation of the diagnosis' (odds ratio: 8.12, 95% confidence interval: 1.46-45.26), and 'satisfaction with consultation' (odds ratio: 2.07, 95% confidence interval: 1.42-3.01). Doctor shopping decreased significantly after patients consulted our department, with 'confirmation of the diagnosis' and 'satisfaction with consultation' being identified as contributing factors. © 2010 Blackwell Publishing Ltd.

77 FR 75823 - Closing of the Port of Whitetail, MT

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-26

...: January 25, 2013. FOR FURTHER INFORMATION CONTACT: Mr. Roger Kaplan, Office of Field Operations, U.S... goods and visit shops and restaurants. Another commenter stated that the closure would increase the cost...

When You Visit Your Doctor After a Heart Attack

MedlinePlus

... products will be searched. Shopping Cart Description Qty Price The Harvard Medical School 6-Week Plan for ... Memory: Understanding Age-Related Memory Loss (PDF - Lowest Price!) $18.00 Harvard Health Letter (Print & Online Access ( ...

When You Visit Your Doctor: Irregular Menstrual Periods

MedlinePlus

... products will be searched. Shopping Cart Description Qty Price The Harvard Medical School 6-Week Plan for ... Memory: Understanding Age-Related Memory Loss (PDF - Lowest Price!) $18.00 Harvard Health Letter (Print & Online Access ( ...

KSC00pp1068

NASA Image and Video Library

2000-07-28

KENNEDY SPACE CENTER, FLA. -- During a visit to KSC, NASCAR race driver Jeff Gordon (left) looks at a tile in the Tile Shop in the Launch Complex 39 area. Former KSC launch director Bob Sieck (far right) looks on

KSC-00pp1068

NASA Image and Video Library

2000-07-28

KENNEDY SPACE CENTER, FLA. -- During a visit to KSC, NASCAR race driver Jeff Gordon (left) looks at a tile in the Tile Shop in the Launch Complex 39 area. Former KSC launch director Bob Sieck (far right) looks on

Lead exposure and radiator repair work.

PubMed

Lussenhop, D H; Parker, D L; Barklind, A; McJilton, C

1989-11-01

In 1986, the ambient air for lead in radiator repair shops in the Minneapolis-St. Paul metropolitan area exceeded the Occupational Safety and Health Administration (OSHA) action level in nine of 12 shops sampled by Minnesota OSHA. We therefore sought to determine the prevalence of lead exposure/toxicity in this industry. Thirty-five radiator shops were identified, 30 were visited, and 53 workers were studied. The mean blood lead level was 1.53 (range 0.24-2.80). Seventeen individuals had blood lead levels greater than or equal to 1.93 mumol/L (40 micrograms/dl). The mean zinc protoporphyrin level (ZPP) was 0.55 mumol/L (range 0.16-1.43). No single worksite or personal characteristic was a strong determinant of either blood lead or ZPP level.

A&M. TAN607 third floor plan for hot shop. Crane control ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607 third floor plan for hot shop. Crane control rooms and their shielding windows. Plenum. Wall rack for manipulators in hot shop. Ralph M. Parsons 902-3-ANP-607-A 103. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-00-693-106755 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

Plow Shop Pond Supplemental Investigation Work Plan

DTIC Science & Technology

1994-09-01

the results of the TIE, major contributors to sediment toxicity in Plow I Shop will be identified. Site-specific numerical criteria for contaminants in...consume Plow Shop Pond fish is less than 1.3". ABB-ES would use an available software package to generate the probability distributions. 5 If...Fort Devens project. The Project Manager is responsible for confirming the appropriateness and adequacy of the technical or engineering services

FME Carpentry Shop Keeps Facility in Good Repair | Poster

Cancer.gov

By Peggy Pearl, Contributing Writer Did you know that what most people call the Carpentry Shop at Facilities Maintenance and Engineering (FME) is actually made up of the three crafts, woodcrafting, painting, and locksmithing?  On any given day, throughout the Frederick National Laboratory campus, you may find shop staff utilizing an assortment of tools and a wide range of skills on projects ranging from simple maintenance to complete renovations.

KSC-98pc786

NASA Image and Video Library

1998-07-06

James W. Tibble (pointing at engine), an Engine Systems/Ground Support Equipment team manager for Rocketdyne, discusses the operation of a Space Shuttle Main Engine with Robert B. Sieck, director of Shuttle Processing; U.S. Congressman Dave Weldon; and KSC Center Director Roy D. Bridges Jr. Following the ribbon cutting ceremony for KSC's new 34,600-square-foot Space Shuttle Main Engine Processing Facility (SSMEPF), KSC employees and media explored the facility. A major addition to the existing Orbiter Processing Facility Bay 3, the SSMEPF replaces the Shuttle Main Engine Shop located in the Vehicle Assembly Building (VAB). The decision to move the shop out of the VAB was prompted by safety considerations and recent engine processing improvements. The first three main engines to be processed in the new facility will fly on Shuttle Endeavour's STS-88 mission in December 1998

The SSMEPF opens with a ribbon-cutting ceremony

NASA Technical Reports Server (NTRS)

1998-01-01

James W. Tibble (pointing at engine), an Engine Systems/Ground Support Equipment team manager for Rocketdyne, discusses the operation of a Space Shuttle Main Engine with Robert B. Sieck, director of Shuttle Processing; U.S. Congressman Dave Weldon; and KSC Center Director Roy D. Bridges Jr. Following the ribbon cutting ceremony for KSC's new 34,600-square-foot Space Shuttle Main Engine Processing Facility (SSMEPF), KSC employees and media explored the facility. A major addition to the existing Orbiter Processing Facility Bay 3, the SSMEPF replaces the Shuttle Main Engine Shop located in the Vehicle Assembly Building (VAB). The decision to move the shop out of the VAB was prompted by safety considerations and recent engine processing improvements. The first three main engines to be processed in the new facility will fly on Shuttle Endeavour's STS-88 mission in December 1998.

Industrial Education. "Small Engines".

ERIC Educational Resources Information Center

Parma City School District, OH.

Part of a series of curriculum guides dealing with industrial education in junior high schools, this guide provides the student with information and manipulative experiences on small gasoline engines. Included are sections on shop adjustment, safety, small engines, internal combustion, engine construction, four stroke engines, two stroke engines,…

Consumers' perceptions of vape shops in Southern California: an analysis of online Yelp reviews.

PubMed

Sussman, Steve; Garcia, Robert; Cruz, Tess Boley; Baezconde-Garbanati, Lourdes; Pentz, Mary Ann; Unger, Jennifer B

2014-01-01

E-cigarettes are sold at many different types of retail establishments. A new type of shop has emerged, the vape shop, which specializes in sales of varied types of e-cigarettes. Vape shops allow users to sample several types. There are no empirical research articles on vape shops. Information is needed on consumers' beliefs and behaviors about these shops, the range of products sold, marketing practices, and variation in shop characteristics by ethnic community and potential counter-marketing messages. This study is the first to investigate marketing characteristics of vape shops located in different ethnic neighborhoods in Los Angeles, by conducting a Yelp electronic search and content analysis of consumer reports on vape shops they have visited. The primary measure was Yelp reviews (N = 103 vape shops in the Los Angeles, California area), which were retrieved and content coded. We compared the attributes of vape shops representing four ethnic communities: African American, Hispanic/Latino, Korean, and White. Vape shop attributes listed as most important were the selection of flavors or hardware (95%), fair prices (92%), and unique flavors or hardware (89%). Important staff marketing attributes included being friendly (99%), helpful/patient/respectful (97%), and knowledgeable/professional (95%). Over one-half of the shops were rated as clean (52%) and relaxed (61%). Relatively few of the reviews mentioned quitting smoking (32%) or safety of e-cigarettes (15%). The selection of flavors and hardware appeared relatively important in Korean ethnic location vape shops. Yelp reviews may influence potential consumers. As such, the present study's focus on Yelp reviews addressed at least eight of the FDA's Center for Tobacco Products' priorities pertaining to marketing influences on consumer beliefs and behaviors. The findings suggest that there were several vape shop and product attributes that consumers considered important to disseminate to others through postings on Yelp. Lack of health warnings about these products may misrepresent their potential risk. The main influence variables were product variety and price. There was only a little evidence of influence of ethnic neighborhood; for example, regarding importance of flavors and hardware. Shop observational studies are recommended to discern safety factors across different ethnic neighborhoods.

8. ARAI Shop and maintenance building ARA627 interior view. Remains ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. ARA-I Shop and maintenance building ARA-627 interior view. Remains of cabinetry and electrical switch panel in one of rooms. Ineel photo no. 1-11. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

How Combined Trip Purposes Are Associated with Transport Choice for Short Distance Trips. Results from a Cross-Sectional Study in the Netherlands

PubMed Central

Scheepers, Eline; Slinger, Minke; Wendel-Vos, Wanda; Schuit, Jantine

2014-01-01

Background One way to increase physical activity is to stimulate a shift from car use to walking or cycling. In single-purpose trips, purpose was found to be an important predictor of transport choice. However, as far as known, no studies have been conducted to see how trips with combined purposes affect this decision. This study was designed to provide insight into associations between combined purposes and transport choice. Methods An online questionnaire (N = 3,663) was used to collect data concerning transport choice for four primary purposes: shopping, going to public natural spaces, sports, and commuting. Per combination of primary trip purpose and transport choice, participants were asked to give examples of secondary purposes that they combine with the primary purpose. Logistic regression analyses were used to model the odds of both cycling and walking versus car use. Results Primary trip purposes combined with commuting, shopping, visiting private contacts or medical care were more likely to be made by car than by cycling or walking. Combinations with visiting catering facilities, trips to social infrastructure facilities, recreational outings, trips to facilities for the provision of daily requirements or private contacts during the trip were more likely to be made by walking and/or cycling than by car. Conclusion Combined trip purposes were found to be associated with transport choice. When stimulating active transport focus should be on the combined-trip purposes which were more likely to be made by car, namely trips combined with commuting, other shopping, visiting private contacts or medical care. PMID:25474653

29 CFR Non - Mandatory Appendix A to Subpart B of Part 1904-Partially Exempt Industries

Code of Federal Regulations, 2010 CFR

2010-07-01

.... 591 Drug Stores and Proprietary Stores 801 Offices & Clinics Of Medical Doctors. 592 Liquor Stores 802... Membership Organizations. 723 Beauty Shops 87 Engineering, Accounting, Research, Management, and Related Services. 724 Barber Shops 899 Services, not elsewhere classified. ...

29 CFR Non - Mandatory Appendix A to Subpart B of Part 1904-Partially Exempt Industries

Code of Federal Regulations, 2011 CFR

2011-07-01

.... 591 Drug Stores and Proprietary Stores 801 Offices & Clinics Of Medical Doctors. 592 Liquor Stores 802... Membership Organizations. 723 Beauty Shops 87 Engineering, Accounting, Research, Management, and Related Services. 724 Barber Shops 899 Services, not elsewhere classified. ...

29 CFR Non - Mandatory Appendix A to Subpart B of Part 1904-Partially Exempt Industries

Code of Federal Regulations, 2014 CFR

2014-07-01

.... 591 Drug Stores and Proprietary Stores 801 Offices & Clinics Of Medical Doctors. 592 Liquor Stores 802... Membership Organizations. 723 Beauty Shops 87 Engineering, Accounting, Research, Management, and Related Services. 724 Barber Shops 899 Services, not elsewhere classified. ...

29 CFR Non - Mandatory Appendix A to Subpart B of Part 1904-Partially Exempt Industries

Code of Federal Regulations, 2013 CFR

2013-07-01

.... 591 Drug Stores and Proprietary Stores 801 Offices & Clinics Of Medical Doctors. 592 Liquor Stores 802... Membership Organizations. 723 Beauty Shops 87 Engineering, Accounting, Research, Management, and Related Services. 724 Barber Shops 899 Services, not elsewhere classified. ...

29 CFR Non - Mandatory Appendix A to Subpart B of Part 1904-Partially Exempt Industries

Code of Federal Regulations, 2012 CFR

2012-07-01

.... 591 Drug Stores and Proprietary Stores 801 Offices & Clinics Of Medical Doctors. 592 Liquor Stores 802... Membership Organizations. 723 Beauty Shops 87 Engineering, Accounting, Research, Management, and Related Services. 724 Barber Shops 899 Services, not elsewhere classified. ...

Teens: Want a Brighter Smile? Visit the Dentist, Not the Shopping Mall

MedlinePlus

... information you need from the Academy of General Dentistry Friday, June 29, 2018 About | Contact InfoBites Quick ... for their adolescent, reports the Academy of General Dentistry (AGD), an organization of general dentists dedicated to ...

China Reflections.

ERIC Educational Resources Information Center

Duval, Concetta

1984-01-01

A math and science high school director, who spent a month studying and traveling in China, comments on cultural differences observed during a visit to a day care center and during shopping trips and relates his experiences jogging during the early morning hours. (RM)

Lead exposure and radiator repair work.

PubMed Central

Lussenhop, D H; Parker, D L; Barklind, A; McJilton, C

1989-01-01

In 1986, the ambient air for lead in radiator repair shops in the Minneapolis-St. Paul metropolitan area exceeded the Occupational Safety and Health Administration (OSHA) action level in nine of 12 shops sampled by Minnesota OSHA. We therefore sought to determine the prevalence of lead exposure/toxicity in this industry. Thirty-five radiator shops were identified, 30 were visited, and 53 workers were studied. The mean blood lead level was 1.53 (range 0.24-2.80). Seventeen individuals had blood lead levels greater than or equal to 1.93 mumol/L (40 micrograms/dl). The mean zinc protoporphyrin level (ZPP) was 0.55 mumol/L (range 0.16-1.43). No single worksite or personal characteristic was a strong determinant of either blood lead or ZPP level. PMID:2817174

Exploring the Role of the Food Environment on Food Shopping Patterns in Philadelphia, PA, USA: A Semiquantitative Comparison of Two Matched Neighborhood Groups

PubMed Central

Hirsch, Jana A.; Hillier, Amy

2013-01-01

Increasing research has focused on the built food environment and nutrition-related outcomes, yet what constitutes a food environment and how this environment influences individual behavior still remain unclear. This study assesses whether travel mode and distance to food shopping venues differ among individuals in varying food environments and whether individual- and household-level factors are associated with food shopping patterns. Fifty neighbors who share a traditionally defined food environment (25 in an unfavorable environment and 25 in a favorable environment) were surveyed using a mix of close- and open-ended survey questions. Food shopping patterns were mapped using Geographic Information Systems (GIS). Stores visited were beyond the 0.5-mile (805 meters) radius traditionally used to represent the extent of an individual’s food environment in an urban area. We found no significant difference in shopping frequency or motivating factor behind store choice between the groups. No differences existed between the two groups for big food shopping trips. For small trips, individuals in the favorable food environment traveled shorter distances and were more likely to walk than drive. Socioeconomic status, including car ownership, education, and income influenced distance traveled. These findings highlight the complexities involved in the study and measurement of food environments. PMID:23343984

Exploring the role of the food environment on food shopping patterns in Philadelphia, PA, USA: a semiquantitative comparison of two matched neighborhood groups.

PubMed

Hirsch, Jana A; Hillier, Amy

2013-01-14

Increasing research has focused on the built food environment and nutrition-related outcomes, yet what constitutes a food environment and how this environment influences individual behavior still remain unclear. This study assesses whether travel mode and distance to food shopping venues differ among individuals in varying food environments and whether individual- and household-level factors are associated with food shopping patterns. Fifty neighbors who share a traditionally defined food environment (25 in an unfavorable environment and 25 in a favorable environment) were surveyed using a mix of close- and open-ended survey questions. Food shopping patterns were mapped using Geographic Information Systems (GIS). Stores visited were beyond the 0.5-mile (805 meters) radius traditionally used to represent the extent of an individual's food environment in an urban area. We found no significant difference in shopping frequency or motivating factor behind store choice between the groups. No differences existed between the two groups for big food shopping trips. For small trips, individuals in the favorable food environment traveled shorter distances and were more likely to walk than drive. Socioeconomic status, including car ownership, education, and income influenced distance traveled. These findings highlight the complexities involved in the study and measurement of food environments.

Study on doctor shopping behavior: insight from patients with upper respiratory tract infection in Taiwan.

PubMed

Wang, Ming-Jye; Lin, Shu-Ping

2010-01-01

Based on the actual medical records of ambulatory care visits, this study analyzed patients' healthcare seeking behavior and doctor shopping behavior (DSB), and investigated the underlying factors and the impact on the depletion of the healthcare resources for health policy makers to build a better health delivery system. Among a cohort comprised of 200,000 patients randomly chosen from the National Health Insurance Research Database of Taiwan in 2004, only the patients seeking ambulatory care visits for upper respiratory tract infection (URI) were analyzed. Among the 45,951 URI patients, 2875 of them exhibited DSB (prevalence 6.3%). The DSB showed a reverse U-shaped relationship with the patient age (the highest DSB in age 18-34 years). The episodes of the URI had a negative impact on the DSB. The odds ratios of gender and the frequency of consultation versus DSB were 1.10 and 4.72, respectively, and the depletion of days of medication and repeat prescription increased with doctor shopping. Health education to raise DSB awareness is necessary, especially for female's age 18-34 years. Implementing a proper referral system with efficient data exchange, setting up control parameters in the IC cards, and strengthening the integrated care plan could reduce the unnecessary waste of the healthcare resources.

Hypertrophic Cardiomyopathy Association

MedlinePlus

... services. Shirt Closeout Sale!!! - Visit our Store to purchase yours today!!! ►►►►►■... Online Shopping Amazon donates 0.5% of the purchase price to Hypertrophic Cardiomyopathy Association. Bookmark the link ...

Diesel Fundamentals. Teacher Edition (Revised).

ERIC Educational Resources Information Center

Clark, Elton; And Others

This module is one of a series of teaching guides that cover diesel mechanics. The module contains 4 sections and 19 units. Section A--Orientation includes the following units: introduction to diesel mechanics and shop safety; basic shop tools; test equipment and service tools; fasteners; bearings; and seals. Section B--Engine Principles and…

VIEW OF TANK (BLDG. 1929) AND GARAGE (BLDG. 1930). SHOP ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF TANK (BLDG. 1929) AND GARAGE (BLDG. 1930). SHOP (BUILDING 1928) IS THE LARGER STRUCTURE IN THE BACKGROUND. Looking southeast - Edwards Air Force Base, X-15 Engine Test Complex, Tank & Garage, Rogers Dry Lake, east of Runway between North Base & South Base, Boron, Kern County, CA

A&M. TAN607. Shield wall sections and details around hot shop ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607. Shield wall sections and details around hot shop and special equipment room, showing taper, crane rail elevations, and elevation for biparting door (door no. 301) in wall between hot shop and special equipment room. Ralph M. Parsons 902-3-ANP-607-S 138. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-62-963-106782 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

A&M. TAN607. Interior view of operating gallery in hot shop. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607. Interior view of operating gallery in hot shop. Shielded viewing windows are along right side of corridor. Cabinet on wheels at left of corridor is operating console for hot shop manipulators. When in use, it is stationed at window station and connected to appropriate control cables. note reserve bottles of zinc bromide above each station. Date: January 3, 1955. INEEL negative no. 55-0072 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

The SSMEPF opens with a ribbon-cutting ceremony

NASA Technical Reports Server (NTRS)

1998-01-01

Participants in the ribbon cutting for KSC's new 34,600-square- foot Space Shuttle Main Engine Processing Facility (SSMEPF) gather to talk inside the facility following the ceremony. From left, they are Robert B. Sieck, director of Shuttle Processing; KSC Center Director Roy D. Bridges Jr.; U.S. Congressman Dave Weldon; John Plowden, vice president of Rocketdyne; and Donald R. McMonagle, manager of Launch Integration. A major addition to the existing Orbiter Processing Facility Bay 3, the SSMEPF replaces the Shuttle Main Engine Shop located in the Vehicle Assembly Building (VAB). The decision to move the shop out of the VAB was prompted by safety considerations and recent engine processing improvements. The first three main engines to be processed in the new facility will fly on Shuttle Endeavour's STS-88 mission in December 1998.

View from northeast of Car Shop showing east wall and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View from northeast of Car Shop showing east wall and north end; also a portion of (east facade) of Foundry building. Structure between houses the boilers and stationary steam engine - East Broad Top Railroad & Coal Company, State Route 994, West of U.S. Route 522, Rockhill Furnace, Huntingdon County, PA

37. DETAIL OF REAR OF STARBOARD ENGINE. AT LOWER LEFT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

37. DETAIL OF REAR OF STARBOARD ENGINE. AT LOWER LEFT OF ENGINE IS THE CASING FOR THE SHAFT GOING INTO THE ADJACENT AFT ENGINE ROOM & MACHINE SHOP. - U.S. Coast Guard Cutter WHITE LUPINE, U.S. Coast Guard Station Rockland, east end of Tillson Avenue, Rockland, Knox County, ME

The feasibility of introducing rapid diagnostic tests for malaria in drug shops in Uganda.

PubMed

Mbonye, Anthony K; Ndyomugyenyi, Richard; Turinde, Asaph; Magnussen, Pascal; Clarke, Siân; Chandler, Clare

2010-12-21

National malaria control programmes and international agencies are keen to scale-up the use of effective rapid diagnostic tests (RDTs) for malaria. The high proportion of the Ugandan population seeking care at drug shops makes these outlets attractive as providers of malaria RDTs. However, there is no precedent for blood testing at drug shops and little is known about how such tests might be perceived and used. Understanding use of drug shops by communities in Uganda is essential to inform the design of interventions to introduce RDTs. We conducted a qualitative study, with 10 community focus group discussions, and 18 in-depth interviews with drug shop attendants, health workers and district health officials. The formative study was carried out in Mukono district, central Uganda an area of high malaria endemicity from May-July 2009. Drug shops were perceived by the community as important in treating malaria and there was awareness among most drug sellers and the community that not all febrile illnesses were malaria. The idea of introducing RDTs for malaria diagnosis in drug shops was attractive to most respondents. It was anticipated that RDTs would improve access to effective treatment of malaria, offset high costs associated with poor treatment, and avoid irrational drug use. However, communities did express fear that drug shops would overprice RDTs, raising the overall treatment cost for malaria. Other fears included poor adherence to the RDT result, reuse of RDTs leading to infections and fear that RDTs would be used to test for human immune deficiency virus (HIV). All drug shops visited had no record on patient data and referral of cases to health units was noted to be poor. These results not only provide useful lessons for implementing the intervention study but have wide implications for scaling up malaria treatment in drug shops.

Distance traveled and frequency of interstate opioid dispensing in opioid shoppers and nonshoppers.

PubMed

Cepeda, M Soledad; Fife, Daniel; Yuan, Yingli; Mastrogiovanni, Greg

2013-10-01

Little is known about how far opioid shoppers travel or how often they cross state lines to fill their opioid prescriptions. This retrospective cohort study evaluated these measures for opioid shoppers and nonshoppers using a large U.S. prescription database. Patients with ≥3 opioid dispensings were followed for 18 months. A subject was considered a shopper when he or she filled overlapping opioid prescriptions written by >1 prescriber at ≥3 pharmacies. A heavy shopper had ≥5 shopping episodes. Outcomes assessed were distance traveled among pharmacies and number of states visited to fill opioid prescriptions. A total of 10,910,451 subjects were included; .7% developed any shopping behavior and their prescriptions accounted for 8.6% of all opioid dispensings. Shoppers and heavy shoppers were younger than the nonshoppers. Shoppers traveled a median of 83.8 miles, heavy shoppers 199.5 miles, and nonshoppers 0 miles. Almost 20% of shoppers or heavy shoppers, but only 4% of nonshoppers, visited >1 state. Shoppers traveled greater distances and more often crossed state borders to fill opioid prescriptions than nonshoppers, and their dispensings accounted for a disproportionate number of opioid dispensings. Sharing of data among prescription-monitoring programs will likely strengthen those programs and may decrease shopping behavior. This study shows that opioid shoppers travel greater distances and more often cross state borders to fill opioid prescriptions than nonshoppers, and their dispensings accounted for a disproportionate number of opioid dispensings. The findings support the need for data sharing among prescription-monitoring programs to deter opioid shopping behavior. Copyright © 2013 American Pain Society. Published by Elsevier Inc. All rights reserved.

Getting closer to people: family planning provision by drug shops in Uganda.

PubMed

Akol, Angela; Chin-Quee, Dawn; Wamala-Mucheri, Patricia; Namwebya, Jane Harriet; Mercer, Sarah Jilani; Stanback, John

2014-11-13

Private-sector drug shops are often the first point of health care in sub-Saharan Africa. Training and supporting drug shop and pharmacy staff to provide a wide range of contraceptive methods and information is a promising high-impact practice for which more information is needed to fully document implementation experience and impact. Between September 2010 and March 2011, we trained 139 drug shop operators (DSOs) in 4 districts of Uganda to safely administer intramuscular DMPA (depot medroxyprogesterone acetate) contraceptive injections. In 2012, we approached 54 of these DSOs and interviewed a convenience sample of 585 of their family planning clients to assess clients' contraceptive use and perspectives on the quality of care and satisfaction with services. Finally, we compared service statistics from April to June 2011 from drug shops, community health workers (CHWs), and government clinics in 3 districts to determine the drug shop market share of family planning services. Most drug shop family planning clients interviewed were women with low socioeconomic status. The large majority (89%) were continuing family planning users. DMPA was the preferred contraceptive. Almost half of the drug shop clients had switched from other providers, primarily from government health clinics, mostly as a result of more convenient locations, shorter waiting times, and fewer stock-outs in drug shops. All clients reported that the DSOs treated them respectfully, and 93% trusted the drug shop operator to maintain privacy. Three-quarters felt that drug shops offered affordable family planning services. Most of the DMPA clients (74%) were very satisfied with receiving their method from the drug shop and 98% intended to get the next injection from the drug shop. Between April and June 2011, clinics, CHWs, and drug shops in 3 districts delivered equivalent proportions of couple-years of protection, with drug shops leading marginally at 36%, followed by clinics (33%) and CHWs (31%). Drug shops can be a viable and convenient source of short-acting contraceptive methods, including DMPA, serving as a complement to government services. Family planning programs in Uganda and elsewhere should consider including drug shops in the network of community-based family planning providers. © Akol et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are properly cited. To view a copy of the license, visit http://creativecommons.org/licenses/by/3.0/. When linking to this article, please use the following permanent link: http://dx.doi.org/10.9745/GHSP-D-14-00085.

4. VIEW NORTH, YARD NORTH OF ENGINE HOUSE, SHOWING WATER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. VIEW NORTH, YARD NORTH OF ENGINE HOUSE, SHOWING WATER TANK AND SHOP Photocopy of photograph, 1941 (Courtesy of Chesapeake Beach Railway Museum; L. W. Rice, photographer) - Chesapeake Beach Railroad Engine House, 21 Yost Place, Seat Pleasant, Prince George's County, MD

Excise tax differences at Oklahoma smoke shops: an opportunity for inter-tribal coordination.

PubMed

Laux, Fritz L; Chaloupka, Frank J; Beebe, Laura A

2015-01-01

Oklahoma's tribal tobacco shops are distributed throughout the state, including in urban areas. During the time frame of this study, state excise tax rates for cigarettes varied by tribe and region, and took five distinct levels, ranging from 5.75 cents to $1.03 per pack. To describe the pricing behavior of these smoke shops in a way that could support potential increases in the tribal taxation of cigarettes within the state. Two waves (2010 and 2011) of site visits were conducted, covering nearly all tribal smoke shops in the northeastern quarter of the state, an area containing the city of Tulsa and 60% of all tribal outlets. Researchers recorded representative prices and verified the tax rate paid (via tax stamp) for each shop. Data were analyzed in 2013. Lower-taxed tribal cigarettes tended to be priced at discounts that were even greater than the differential in tax rates. For example, across waves, the average pack of Marlboros from a shop with a 5.75-cent tax stamp sold for 52 cents less than the same pack from a 25.75-cent shop and 60 cents less than from a 51.5-cent shop. The minimal inter-tribal price response to the discontinuation of large quantities of contraband cigarette sales suggests that inter-tribal price competition in the Tulsa area is not as intense as expected. Ample scope exists for either unilateral or coordinated cross-tribal tax and price increases that will increase tribal cigarette tax revenue collections and improve public health. Copyright © 2015 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

A&M. TAN607. Detail of installed hot shop viewing window almost ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607. Detail of installed hot shop viewing window almost complete. Cable channel is still exposed, lacking cover. Note bottle in upper left corner containing spare zinc bromide in even of leak from window. Date: October 20, 1954. INEEL negative no. 12560 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

STUDY AND DEVELOPMENT OF SHOP-CENTERED TEAM TEACHING FOR POTENTIAL HIGH SCHOOL DROP-OUTS.

ERIC Educational Resources Information Center

ODELL, WILLIAM R.

A RATIONALE AND PROCEDURE FOR THE EFFECTIVE VOCATIONAL EDUCATION OF LOW ACHIEVING HIGH SCHOOL STUDENTS WAS DEVELOPED FROM AN ANALYSIS OF 13 HIGH SCHOOL PROGRAMS IN 10 SAN FRANCISCO BAY AREA SCHOOL SYSTEMS WHERE THE RICHMOND PRE-ENGINEERING TECHNOLOGY PROGRAM WAS UNDER OPERATION. EXPERIMENTAL EFFORTS WERE MADE TO ESTABLISH SHOP-CENTERED TEAM…

Career Guidance Continuum.

ERIC Educational Resources Information Center

Varmecky, John A.

1989-01-01

Describes the art career guidance programs at Johnstown High School (Pennsylvania). Programs include high school art students' visits to elementary and junior high schools, an "Artist at Work" exhibit at a shopping mall, and an art career guide for high school students. The programs have increased interest in art careers from grade…

10. Building 105, Facilities Engineering Building, 1830, interior, air condition ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. Building 105, Facilities Engineering Building, 1830, interior, air condition repair shop, S end of building, looking N. - Watervliet Arsenal, Building 105, South Broadway, on Hudson River, Watervliet, Albany County, NY

39. ENGINE LATHE, SANDER, AND LATHE WITH PATTERNS AND SHAFTS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

39. ENGINE LATHE, SANDER, AND LATHE WITH PATTERNS AND SHAFTS ABOVE-LOOKING NORTHWEST. - W. A. Young & Sons Foundry & Machine Shop, On Water Street along Monongahela River, Rices Landing, Greene County, PA

Asbestos exposure from gaskets during disassembly of a medium duty diesel engine.

PubMed

Liukonen, Larry R; Weir, Francis W

2005-03-01

Diesel engines have historically used asbestos-containing gaskets leading to concerns of fiber release and mechanic exposure. Other published studies regarding asbestos fiber release during gasket removal have reported on short-duration events; were conducted under simulated work conditions; or had other limitations. There are no comprehensive studies relating to diesel engine gaskets under conditions similar to those reported herein, evaluating asbestos fiber release from gaskets during all facets of a complete disassembly and cleaning of a medium duty diesel engine in a busy repair and service shop by a journeyman mechanic. Asbestos content of all gaskets was identified; all disassembly tasks were described and timed; and personal and area air monitoring was conducted for each task. Twenty seven of thirty three gaskets contained chrysotile asbestos in concentrations that ranged from 5 to 70%. All but one air monitoring sample reported results below the limit of reliable detection even though plumes of visible dust were evident during various removal, cleaning, and buffing procedures. The detection limit for airborne asbestos fibers in this investigation was influenced by the presence of other shop dust in the air. Our investigation demonstrates that using shop-standard procedures in an established repair facility, a journeyman mechanic has very little potential for exposure to airborne asbestos fibers during disassembly of an engine, approximately 10% or less than that currently considered to be acceptable by OSHA.

A Method for Efficient Searching at Online Shopping

NASA Astrophysics Data System (ADS)

Sanjo, Tomomi; Nagata, Moiro

In recent years, online shopping has been popularized. However, the users can not find efficiently their items at on-line markets. This paper proposes an engine to find items easily at the online market. This engine has the following facilities. First, it presents information in a fixed format. Second, the user can find items by selected keywords. Third, it presents only necessary information by using his/her history. Finally, it has a customize function for each user. Moreover, the system asks the users to down load a page of recommended items. We show the effectives of our proposal with some experiments.

11. BUILDING NO. 18 (ENGINEERING BUILDING), CENTER, IN RELATION TO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. BUILDING NO. 18 (ENGINEERING BUILDING), CENTER, IN RELATION TO BUILDING NO. 19 (BENDING SHOP AND OVEN) AT FAR LEFT, AND TO THE WET BASIN AT FAR RIGHT. VIEW TO NORTH-NORTHWEST. - United Engineering Company Shipyard, 2900 Main Street, Alameda, Alameda County, CA

1. Distant view shows Engine Room Building behind cranes. Retort ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Distant view shows Engine Room Building behind cranes. Retort rings in foreground were once located in Engine Room Building. See photo WA-131-A-2. Building on left is Machine Shop. Boiler Building is in front of stack. - Pacific Creosoting Plant, Engine Room Building, 5350 Creosote Place, Northeast, Bremerton, Kitsap County, WA

Amber Plug-In for Protein Shop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oliva, Ricardo

2004-05-10

The Amber Plug-in for ProteinShop has two main components: an AmberEngine library to compute the protein energy models, and a module to solve the energy minimization problem using an optimization algorithm in the OPTI-+ library. Together, these components allow the visualization of the protein folding process in ProteinShop. AmberEngine is a object-oriented library to compute molecular energies based on the Amber model. The main class is called ProteinEnergy. Its main interface methods are (1) "init" to initialize internal variables needed to compute the energy. (2) "eval" to evaluate the total energy given a vector of coordinates. Additional methods allow themore » user to evaluate the individual components of the energy model (bond, angle, dihedral, non-bonded-1-4, and non-bonded energies) and to obtain the energy of each individual atom. The Amber Engine library source code includes examples and test routines that illustrate the use of the library in stand alone programs. The energy minimization module uses the AmberEngine library and the nonlinear optimization library OPT++. OPT++ is open source software available under the GNU Lesser General Public License. The minimization module currently makes use of the LBFGS optimization algorithm in OPT++ to perform the energy minimization. Future releases may give the user a choice of other algorithms available in OPT++.« less

Teaching Independent Community Social Skills to the Multihandicapped.

ERIC Educational Resources Information Center

Beaulac, Pauline F.

Ten multihandicapped high-school students in the Dayton (Ohio) Public Schools were trained using a curriculum of independent community social skills, focusing specifically on restaurant skills, travel skills, shopping skills, self-care skills, and skills for visiting a business or government agency. The students made weekly trips into the…

Don't Leave the Music on the Bus.

ERIC Educational Resources Information Center

Edman, Steve; Press, Doreen; Howk-Hanley, Mary

1998-01-01

Maintains that a shopping mall is an ideal location for an elementary school music performance and can increase community visibility in order to encourage support for the music program. Provides guidelines for planning the performance from choosing the mall and selecting music to transporting the equipment and visiting the site. (CMK)

18. VIEW TOWARD MAIN ENTRANCE OF AMERICAN TOOL ENGINE LATHE, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. VIEW TOWARD MAIN ENTRANCE OF AMERICAN TOOL ENGINE LATHE, JIB CRANE ABOVE-LOOKING NORTH. - W. A. Young & Sons Foundry & Machine Shop, On Water Street along Monongahela River, Rices Landing, Greene County, PA

17. TRACTOR ENGINE POWERING SHAFT SYSTEM IN FOREGROUND, BELT CONNECTS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. TRACTOR ENGINE POWERING SHAFT SYSTEM IN FOREGROUND, BELT CONNECTS WITH MAIN SHAFT LOOKING EAST. - W. A. Young & Sons Foundry & Machine Shop, On Water Street along Monongahela River, Rices Landing, Greene County, PA

13. RADIAL DRILL, ENGINE LATHE, DRILL PRESS, AND GRINDER (L ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. RADIAL DRILL, ENGINE LATHE, DRILL PRESS, AND GRINDER (L TO R)-LOOKING SOUTHEAST. - W. A. Young & Sons Foundry & Machine Shop, On Water Street along Monongahela River, Rices Landing, Greene County, PA

37. ENGINE ROOM, FROM PORT SIDE OF CONTROL CONSOLE, LOOKING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

37. ENGINE ROOM, FROM PORT SIDE OF CONTROL CONSOLE, LOOKING TOWARDS STERN, PORT ENGINE AT RIGHT, STARBOARD ENGINE AT LEFT, BOTH ARE DIESEL ENGINES, IN BACKGROUND IS STAIRS UP TO CREWS' BERTHING, BEYONE THE STAIRS IS THE DOOR TO AFT ENGINE ROOM & MACHINE SHOP. - U.S. Coast Guard Cutter WHITE HEATH, USGS Integrated Support Command Boston, 427 Commercial Street, Boston, Suffolk County, MA

A&M. TAN607. Foundation plan for hot shop floor and pool. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607. Foundation plan for hot shop floor and pool. Tunnels to turntable. Motor pit. Ralph M. Parsons 902-3-ANP-607-S128. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-62-693-160722 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

A&M. Outdoor turntable. Aerial view of trackage as of 1954. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. Outdoor turntable. Aerial view of trackage as of 1954. Camera faces northeast along line of track heading for the IET. Upper set of east/west tracks head for the hot shop; the other, for the cold shop. Date: November 24, 1954. INEEL negative no. 13203 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

Criterion-Referenced Test Items for Small Engines.

ERIC Educational Resources Information Center

Herd, Amon

This notebook contains criterion-referenced test items for testing students' knowledge of small engines. The test items are based upon competencies found in the Missouri Small Engine Competency Profile. The test item bank is organized in 18 sections that cover the following duties: shop procedures; tools and equipment; fasteners; servicing fuel…

Elders' Experiences During Return Visits to the Emergency Department: A Phenomenographic Study in Taiwan.

PubMed

Han, Chin-Yen; Lin, Chun-Chih; Goopy, Suzanne; Hsiao, Ya-Chu; Barnard, Alan

Elders often experience multiple chronic diseases associated with frequent early return visits to emergency departments (EDs). There is limited knowledge of the experiences and concerns of elders during ED return visits. The purpose of the research was to explore the experiences of elders during ED return visits, with a view toward identifying factors that contribute to return visits. The qualitative approach of phenomenography was used. Data were collected at one ED in a 3,000-bed medical center in Taiwan. Inclusion criteria were aged 65 or above and return visits to the ED within 72 hours of discharge from an index ED visit. The seven steps of qualitative data analysis for a phenomenographic study were employed to develop understanding of participants' experiences. Thirty return-visit elders were interviewed in 2014. Four categories of description were established from the participants' accounts. These were "being tricked by ED staff," "doctor shopping," "a sign of impending death," and "feeling fatalistic." The outcome space of elders with early return visits to ED was characterized as "seeking the answer." Index ED visits are linked to return visits for Taiwanese elders through physiological, psychological, and social factors.

The SSMEPF opens with a ribbon-cutting ceremony

NASA Technical Reports Server (NTRS)

1998-01-01

Participants in the ribbon cutting for KSC's new 34,600-square- foot Space Shuttle Main Engine Processing Facility (SSMEPF) pose in front of a Space Shuttle Main Engine on display for the ceremony. From left, they are Ed Adamek, vice president and associate program manager for Ground Operations of United Space Alliance; John Plowden, vice president of Rocketdyne; Donald R. McMonagle, manager of Launch Integration; U.S. Congressman Dave Weldon; KSC Center Director Roy D. Bridges Jr.; Wade Ivey of Ivey Construction, Inc.; and Robert B. Sieck, director of Shuttle Processing. A major addition to the existing Orbiter Processing Facility Bay 3, the SSMEPF replaces the Shuttle Main Engine Shop located in the Vehicle Assembly Building (VAB). The decision to move the shop out of the VAB was prompted by safety considerations and recent engine processing improvements. The first three main engines to be processed in the new facility will fly on Shuttle Endeavour's STS-88 mission in December 1998.

13. Building 105, Facilities Engineering Building, 1830, interior, tin metal ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. Building 105, Facilities Engineering Building, 1830, interior, tin metal shop area, showing construction of window and part of ceiling, E wall of building. - Watervliet Arsenal, Building 105, South Broadway, on Hudson River, Watervliet, Albany County, NY

4. DETAIL ALONG WEST SIDE, SHOWING EXTERIOR STAIRWAY, BUILDING NO. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. DETAIL ALONG WEST SIDE, SHOWING EXTERIOR STAIRWAY, BUILDING NO. 1 IN THE CENTER DISTANCE, AND ONE OF THE BENDING SHOPS AT RIGHT. - United Engineering Company Shipyard, Engineering Building, 2900 Main Street, Alameda, Alameda County, CA

1. Credit PSR. This view captures the main entrance to ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Credit PSR. This view captures the main entrance to the Administration/Shops Building, constructed in 1963, looking north northeast (30°). The plaque at the base of the flagpole commemorates the first firing of a liquid-fueled rocket engine at Test Stand "A" in 1945. - Jet Propulsion Laboratory Edwards Facility, Administration & Shops Building, Edwards Air Force Base, Boron, Kern County, CA

Want to Teach? First Go to the Mall.

ERIC Educational Resources Information Center

Logan, Lin

1996-01-01

Education majors need an updated field experience aimed at studying adolescents from diverse cultural and socioeconomic backgrounds. Visiting a local shopping mall on a Friday night to observe teens in their natural habitat is entertaining and enlightening. By surveying kids, college students can find out what teens value and examine their own…

A survey of environmental and occupational work practices in the automotive refinishing industry of a developing country: Sonora, Mexico.

PubMed

Velázquez, Luis; Bello, Dhimiter; Munguia, Nora; Zavala, Andrea; Marin, Amina; Moure-Eraso, Rafael

2008-01-01

The automotive repair and refinishing industry has been studied intensively in industrialized countries, in part due to use of hazardous chemicals such as isocyanates and solvents, but little is known about industry practices in the developing world. The main objective of this paper was to investigate environmental and occupational work practices of this industry in a developing region, Sonora, Mexico. An integrated survey approach maximizes the opportunity for identifying risks as well as reducing risks. This investigation included detailed workplace visits to 41 body shops and 6 paint suppliers, as well as a survey of shop owners and 24 workers. Information was collected on work practices, level of technology in the shops, use of personal protective equipment, consumption and handling of hazardous chemicals and waste, hazard communication, and environmental consciousness. Most shops had little capital, outdated technology for exposure control, poor working conditions, high potential for exposure to hazardous chemicals, and little awareness of environmental and occupational health and safety. We concluded that work practices in the Sonoran auto refinishing industry are unsustainable and may pose a health risk to workers and the environment.

Saturn Apollo Program

NASA Image and Video Library

1965-03-01

This photograph shows F-1 engines being stored in the F-1 Engine Preparation Shop, building 4666, at the Marshall Space Flight Center. Each F-1 engine produced a thrust of 1,500,000 pounds. A cluster of five engines was mounted on the thrust structure of the S-IC stage of a 364-foot long Saturn V launch vehicle that ultimately took astronauts to the Moon.

Beyond Neighborhood Food Environments: Distance Traveled to Food Establishments in 5 US Cities, 2009–2011

PubMed Central

Han, Bing; Cohen, Deborah A.

2015-01-01

Introduction Accurate conceptualizations of neighborhood environments are important in the design of policies and programs aiming to improve access to healthy food. Neighborhood environments are often defined by administrative units or buffers around points of interest. An individual may eat and shop for food within or outside these areas, which may not reflect accessibility of food establishments. This article examines the relevance of different definitions of food environments. Methods We collected data on trips to food establishments using a 1-week food and travel diary and global positioning system devices. Spatial-temporal clustering methods were applied to identify homes and food establishments visited by study participants. Results We identified 513 visits to food establishments (sit-down restaurants, fast-food/convenience stores, malls or stores, groceries/supermarkets) by 135 participants in 5 US cities. The average distance between the food establishments and homes was 2.6 miles (standard deviation, 3.7 miles). Only 34% of the visited food establishments were within participants’ neighborhood census tract. Buffers of 1 or 2 miles around the home covered 55% to 65% of visited food establishments. There was a significant difference in the mean distances to food establishments types (P = .008). On average, participants traveled the longest distances to restaurants and the shortest distances to groceries/supermarkets. Conclusion Many definitions of the neighborhood food environment are misaligned with individual travel patterns, which may help explain the mixed findings in studies of neighborhood food environments. Neighborhood environments defined by actual travel activity may provide more insight on how the food environment influences dietary and food shopping choices. PMID:26247426

40 CFR 63.10685 - What are the requirements for the control of contaminants from scrap?

Code of Federal Regulations, 2013 CFR

2013-07-01

... not charge to a furnace metallic scrap that contains scrap from motor vehicle bodies, engine blocks... vehicle bodies, engine blocks, oil filters, oily turnings, machine shop borings, transformers or... restriction does not apply to any post-consumer engine blocks, post-consumer oil filters, or oily turnings...

40 CFR 63.10685 - What are the requirements for the control of contaminants from scrap?

Code of Federal Regulations, 2012 CFR

2012-07-01

... not charge to a furnace metallic scrap that contains scrap from motor vehicle bodies, engine blocks... vehicle bodies, engine blocks, oil filters, oily turnings, machine shop borings, transformers or... restriction does not apply to any post-consumer engine blocks, post-consumer oil filters, or oily turnings...

40 CFR 63.10685 - What are the requirements for the control of contaminants from scrap?

Code of Federal Regulations, 2014 CFR

2014-07-01

... not charge to a furnace metallic scrap that contains scrap from motor vehicle bodies, engine blocks... vehicle bodies, engine blocks, oil filters, oily turnings, machine shop borings, transformers or... restriction does not apply to any post-consumer engine blocks, post-consumer oil filters, or oily turnings...

12. VIEW FROM MAIN ENTRANCE OF STOVE, ENGINE LATHE, AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. VIEW FROM MAIN ENTRANCE OF STOVE, ENGINE LATHE, AND GRINDER (L TO R) IN FOREGROUND, SHAFTING ABOVE LOOKING SOUTH. - W. A. Young & Sons Foundry & Machine Shop, On Water Street along Monongahela River, Rices Landing, Greene County, PA

Emergency contraception supply in Australian pharmacies after the introduction of ulipristal acetate: a mystery shopping mixed-methods study.

PubMed

Collins, Jack Charles; Schneider, Carl Richard; Moles, Rebekah Jane

2018-05-09

To explore the supply of emergency contraception (EC) from Australian community pharmacies after the introduction of ulipristal acetate (UPA) and to explore pharmacists' knowledge, decision-making, attitudes and beliefs surrounding supplying EC. A mixed-methods approach of mystery shopping with structured interview was employed. From August to November 2017, 20 pharmacy students mystery-shopped 10 community pharmacies in metropolitan Sydney, Australia, requesting "the morning after pill." Each pharmacy was visited five times with varying scenarios. Structured interviews were conducted immediately postvisit. Visit data were analyzed descriptively and comparatively. Interviews were transcribed verbatim and categorically analyzed. Of 50 planned visits, 43 were analyzed. EC was supplied in 38 requests by pharmacists (54% male). Levonorgestrel (LNG) was more frequently supplied than UPA (74% vs. 26%). UPA was only supplied when intercourse occurred >72 h prior. Directions for use were provided in 35 supplies. No difference in questioning or counseling was found based on sex of requester. Female pharmacists provided more counseling points (MED=4 [IQR=4-5] vs. MED=3 [IQR=0-4]; p<.01). Two pharmacists asked all guideline questions, and no pharmacist provided all guideline counseling points. Interviews elicited supply guidelines, regulatory and clinical knowledge, financial considerations, privacy and stock availability as factors influencing EC supply. EC was supplied in accordance with local legislation in all instances, with the majority supplied within the licensed timeframe for each EC formulation. LNG was supplied more frequently than UPA. UPA was only supplied in the 72-120-h timeframe. Clinical and regulatory knowledge, availability and cost to consumer were identified as factors influencing supply. This study found that despite the introduction of ulipristal acetate to the Australian market, it is not frequently supplied. Interviews identified the need for continuing professional development regarding pharmacist clinical and regulatory knowledge. Future guideline development should consider utility and user needs to optimize the implementation of guidelines. Copyright © 2018. Published by Elsevier Inc.

Mystery shopping and alcohol sales: do supermarkets and liquor stores sell alcohol to underage customers?

PubMed

Gosselt, Jordy F; van Hoof, Joris J; de Jong, Menno D T; Prinsen, Sander

2007-09-01

The Dutch national policy regarding alcohol and youth relies on retailers' willingness to refuse to sell alcohol to underage customers. This study examined unobtrusively whether supermarkets and liquor stores do indeed comply with the legal age restrictions for alcohol sales. A research protocol was developed based on the methodology of mystery shopping. Using the protocol, 150 supermarkets and 75 liquor stores were visited by 15-year-old adolescents who tried to buy soft alcoholic beverages (legal age, 16 years), and 75 liquor stores were visited by 17-year-old adolescents who tried to buy strong alcoholic beverages (legal age, 18). Of all 300 buying attempts, 86% were successful. In supermarkets, 88% of all attempts succeeded. In liquor stores, a difference was found between the purchase of strong alcohol by 17-year-olds (89%) and the purchase of soft alcoholic beverages by 15-year-olds (77%). In only 71 of all visits, mystery shoppers were asked for an ID. In 39% of these cases, they were still able to buy alcohol. Female adolescents were more successful in buying alcohol than male adolescents. The results show that supermarkets and liquor stores generally fail to see the need for extra care when young customers try to buy alcohol. Legal age restrictions without enforcement and facilitation clearly do not suffice to protect adolescents from early exposure to alcohol.

Willingness-to-pay for a rapid malaria diagnostic test and artemisinin-based combination therapy from private drug shops in Mukono district, Uganda

PubMed Central

Hansen, Kristian Schultz; Pedrazzoli, Debora; Mbonye, Anthony; Clarke, Sian; Cundill, Bonnie; Magnussen, Pascal; Yeung, Shunmay

2013-01-01

In Uganda, as in many parts of Africa, the majority of the population seek treatment for malaria in drug shops as their first point of care; however, parasitological diagnosis is not usually offered in these outlets. Rapid diagnostic tests (RDTs) for malaria have attracted interest in recent years as a tool to improve malaria diagnosis, since they have proved accurate and easy to perform with minimal training. Although RDTs could feasibly be performed by drug shop vendors, it is not known how much customers would be willing to pay for an RDT if offered in these settings. We conducted a contingent valuation survey among drug shop customers in Mukono District, Uganda. Exit interviews were undertaken with customers aged 15 years and above after leaving a drug shop having purchased an antimalarial and/or paracetamol. The bidding game technique was used to elicit the willingness-to-pay (WTP) for an RDT and a course of artemisinin-based combination therapy (ACT) with and without RDT confirmation. Factors associated with WTP were investigated using linear regression. The geometric mean WTP for an RDT was US$0.53, US$1.82 for a course of ACT and US$2.05 for a course of ACT after a positive RDT. Factors strongly associated with a higher WTP for these commodities included having a higher socio-economic status, no fever/malaria in the household in the past 2 weeks and if a malaria diagnosis had been obtained from a qualified health worker prior to visiting the drug shop. The findings further suggest that the WTP for an RDT and a course of ACT among drug shop customers is considerably lower than prevailing and estimated end-user prices for these commodities. Increasing the uptake of ACTs in drug shops and restricting the sale of ACTs to parasitologically confirmed malaria will therefore require additional measures. PMID:22589226

Willingness-to-pay for a rapid malaria diagnostic test and artemisinin-based combination therapy from private drug shops in Mukono District, Uganda.

PubMed

Hansen, Kristian Schultz; Pedrazzoli, Debora; Mbonye, Anthony; Clarke, Sian; Cundill, Bonnie; Magnussen, Pascal; Yeung, Shunmay

2013-03-01

In Uganda, as in many parts of Africa, the majority of the population seek treatment for malaria in drug shops as their first point of care; however, parasitological diagnosis is not usually offered in these outlets. Rapid diagnostic tests (RDTs) for malaria have attracted interest in recent years as a tool to improve malaria diagnosis, since they have proved accurate and easy to perform with minimal training. Although RDTs could feasibly be performed by drug shop vendors, it is not known how much customers would be willing to pay for an RDT if offered in these settings. We conducted a contingent valuation survey among drug shop customers in Mukono District, Uganda. Exit interviews were undertaken with customers aged 15 years and above after leaving a drug shop having purchased an antimalarial and/or paracetamol. The bidding game technique was used to elicit the willingness-to-pay (WTP) for an RDT and a course of artemisinin-based combination therapy (ACT) with and without RDT confirmation. Factors associated with WTP were investigated using linear regression. The geometric mean WTP for an RDT was US$0.53, US$1.82 for a course of ACT and US$2.05 for a course of ACT after a positive RDT. Factors strongly associated with a higher WTP for these commodities included having a higher socio-economic status, no fever/malaria in the household in the past 2 weeks and if a malaria diagnosis had been obtained from a qualified health worker prior to visiting the drug shop. The findings further suggest that the WTP for an RDT and a course of ACT among drug shop customers is considerably lower than prevailing and estimated end-user prices for these commodities. Increasing the uptake of ACTs in drug shops and restricting the sale of ACTs to parasitologically confirmed malaria will therefore require additional measures.

1. Contextual view to west of the Southern Pacific Railroad ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Contextual view to west of the Southern Pacific Railroad Carlin Shops buildings at Carlin, Nevada. Visible beneath the pedestrian bridge are the Engine Stores Building (HAER NV-26-A) left, Oil House (HAER NV-26-B) left center, and Roundhouse Machine Shop Extension (HAER NV-26-C) center background. The work train cars at right consist of the Boom Tender normally coupled to the wrecking crane and over which the crane's boom hung during travel, and a former Harriman standard-design Railway Post Office car (90mm lens). - Southern Pacific Railroad, Carlin Shops, Foot of Sixth Street, Carlin, Elko County, NV

7. Photographic copy (reduced to 4 x 5 from 8 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. Photographic copy (reduced to 4 x 5 from 8 X 10 black and white paper reproduction in 1941 appraisal by E.E. Malloy at the Engineering Office, Oakland Army Base, California). Photograph taken between June 1940 and January 1941 by unknown photographer. PARTIAL SOUTH ELEVATION OF VEHICLE MAINTENANCE SHOP (BLDG. 99). - Oakland Army Base, Vehicle Maintenance Shop, Attu Street & Corregidor Avenue, Oakland, Alameda County, CA

Installation Restoration Program. Phase I. Records Search, Vance Air Force Base, Oklahoma.

DTIC Science & Technology

1984-07-01

cadmium , and descaling solutions. The general trend in waste disposal over the years since VAFB first began operation has been from 3 largely unsegregated...generated at the jet engine shop and metal plating shops and consists of phosphoric acid, chromic acid, potassium permanganate, cadmium , and descaling...benzene, MIBK, carbon tetrachloride, MEK, methylene chloride, and acetone. The metal analytes should include cadmium , chromium, copper, iron, lead

120. ARAI Expansion of ARA627 shop and maintenance building for ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

120. ARA-I Expansion of ARA-627 shop and maintenance building for new use as materials and metallurgy laboratory. Shows ground floor plan addition of gas analyzer room, fatigue testing room, microscope room, and offices. Idaho Nuclear Corporation 1230-ARA-627-A-5. Date: June 1970. Ineel index code no. 068-0627-00-400-154062. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

A novel hybrid genetic algorithm to solve the make-to-order sequence-dependent flow-shop scheduling problem

NASA Astrophysics Data System (ADS)

Mirabi, Mohammad; Fatemi Ghomi, S. M. T.; Jolai, F.

2014-04-01

Flow-shop scheduling problem (FSP) deals with the scheduling of a set of n jobs that visit a set of m machines in the same order. As the FSP is NP-hard, there is no efficient algorithm to reach the optimal solution of the problem. To minimize the holding, delay and setup costs of large permutation flow-shop scheduling problems with sequence-dependent setup times on each machine, this paper develops a novel hybrid genetic algorithm (HGA) with three genetic operators. Proposed HGA applies a modified approach to generate a pool of initial solutions, and also uses an improved heuristic called the iterated swap procedure to improve the initial solutions. We consider the make-to-order production approach that some sequences between jobs are assumed as tabu based on maximum allowable setup cost. In addition, the results are compared to some recently developed heuristics and computational experimental results show that the proposed HGA performs very competitively with respect to accuracy and efficiency of solution.

Engine Development Design Margins Briefing Charts

NASA Technical Reports Server (NTRS)

Bentz, Chuck

2006-01-01

New engines experience durability problems after entering service. The most prevalent and costly is the hot section, particularly the high-pressure turbine. The origin of durability problems can be traced back to: 1) the basic aero-mechanical design systems, assumptions, and design margins used by the engine designers, 2) the available materials systems, and 3) to a large extent, aggressive marketing in a highly competitive environment that pushes engine components beyond the demonstrated capability of the basic technology available for the hardware designs. Unfortunately the user must operate the engine in the service environment in order to learn the actual thrust loading and the time at max effort take-off conditions used in service are needed to determine the hot section life. Several hundred thousand hours of operational service will be required before the demonstrated reliability of a fleet of engines or the design deficiencies of the engine hot section parts can be determined. Also, it may take three to four engine shop visits for heavy maintenance on the gas path hardware to establish cost effective build standards. Spare parts drive the oerator's engine maintenance costs but spare parts also makes lots of money for the engine manufacturer during the service life of an engine. Unless competition prevails for follow-on engine buys, there is really no motivation for an OEM to spend internal money to improve parts durability and reduce earnings derived from a lucrative spare parts business. If the hot section life is below design goals or promised values, the OEM migh argue that the engine is being operated beyond its basic design intent. On the other hand, the airframer and the operator will continue to remind the OEM that his engine was selected based on a lot of promises to deliver spec thrust with little impact on engine service life if higher thrust is used intermittently. In the end, a standoff prevails and nothing gets fixed. This briefing will propose ways to hold competing engine manufacturers more accountable for engine hot section design margins during the entire Engine Development process as well as provide tools to assess the design temperature margins in the hot section parts of Service Engines.

Creative Play Leads to Lasting Memories

ERIC Educational Resources Information Center

Goff, Lynn

2010-01-01

When the author visits art museums, she always winds up in the children's section of the museum shop looking for appropriate books and games for her students. The games always intrigue her; however, they are rarely designed for more than two to four players, and the cost is often prohibitive. In light of this frustrating situation, she has spent a…

No Snow? No Problem! Ski Statutes Still Provide Legal Protection

ERIC Educational Resources Information Center

Buckmaster, Melanie E.; Young, Sarah J.

2018-01-01

In August 2012, Barbara Fakhouri visited Ober Gatlinburg, a ski resort located in eastern Tennessee to vacation with her family. Ms. Fakhouri used a wheelchair to ambulate. Despite the absence of snow on the ground, the resort operated year-round with many amenities such as an amusement park, restaurant, lounge, and shopping center to captivate…

1. View of engine terminal complex looking westnorthwest from east ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. View of engine terminal complex looking west-northwest from east side of Phillips Drive. Shown are (left to right) the south roundhouse, the machine and blacksmith shops, the storehouse, the oil house, and the coaling sation (behind the oil house in this view). - Central Railroad of New Jersey, Engine Terminal, Jersey City, Hudson County, NJ

26. Photocopied from Photo 1217, Olmstead Folder #2, Engineering Department, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

26. Photocopied from Photo 1217, Olmstead Folder #2, Engineering Department, Utah Power & Light Co., Salt Lake City, Utah. MACHINE SHOP -- LAB. - Telluride Power Company, Olmsted Hydroelectric Plant, mouth of Provo River Canyon West of U.S. Route 189, Orem, Utah County, UT

27. Photocopied from Photo 1216, Olmstead Folder #2, Engineering Department, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

27. Photocopied from Photo 1216, Olmstead Folder #2, Engineering Department, Utah Power & Light Co., Salt Lake City, Utah. MACHINE SHOP -- LAB. - Telluride Power Company, Olmsted Hydroelectric Plant, mouth of Provo River Canyon West of U.S. Route 189, Orem, Utah County, UT

KSC-98pc783

NASA Image and Video Library

1998-07-06

KSC Center Director Roy D. Bridges Jr. and U.S. Congressman Dave Weldon (holding scissors) cut the ribbon at a ceremony on July 6 to open KSC's new 34,600-square-foot Space Shuttle Main Engine Processing Facility (SSMEPF). Joining in the ribbon cutting are (left) Ed Adamek, vice president and associate program manager for Ground Operations of United Space Alliance; Marvin L. Jones, director of Installation Operations; Donald R. McMonagle, manager of Launch Integration; (right) Wade Ivey of Ivey Construction, Inc.; Robert B. Sieck, director of Shuttle Processing; and John Plowden, vice president of Rocketdyne. A major addition to the existing Orbiter Processing Facility Bay 3, the SSMEPF replaces the Shuttle Main Engine Shop located in the Vehicle Assembly Building (VAB). The decision to move the shop out of the VAB was prompted by safety considerations and recent engine processing improvements. The first three main engines to be processed in the new facility will fly on Shuttle Endeavour's STS-88 mission in December 1998

The SSMEPF opens with a ribbon-cutting ceremony

NASA Technical Reports Server (NTRS)

1998-01-01

KSC Center Director Roy D. Bridges Jr. and U.S. Congressman Dave Weldon (holding scissors) cut the ribbon at a ceremony on July 6 to open KSC's new 34,600-square-foot Space Shuttle Main Engine Processing Facility (SSMEPF). Joining in the ribbon cutting are (left) Ed Adamek, vice president and associate program manager for Ground Operations of United Space Alliance; Marvin L. Jones, director of Installation Operations; Donald R. McMonagle, manager of Launch Integration; (right) Wade Ivey of Ivey Construction, Inc.; Robert B. Sieck, director of Shuttle Processing; and John Plowden, vice president of Rocketdyne. A major addition to the existing Orbiter Processing Facility Bay 3, the SSMEPF replaces the Shuttle Main Engine Shop located in the Vehicle Assembly Building (VAB). The decision to move the shop out of the VAB was prompted by safety considerations and recent engine processing improvements. The first three main engines to be processed in the new facility will fly on Shuttle Endeavour's STS-88 mission in December 1998.

2007 SB14 Source Reduction Plan/Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, L

2007-07-24

Aqueous solutions (mixed waste) generated from various LLNL operations, such as debris washing, sample preparation and analysis, and equipment maintenance and cleanout, were combined for storage in the B695 tank farm. Prior to combination the individual waste streams had different codes depending on the particular generating process and waste characteristics. The largest streams were CWC 132, 791, 134, 792. Several smaller waste streams were also included. This combined waste stream was treated at LLNL's waste treatment facility using a vacuum filtration and cool vapor evaporation process in preparation for discharge to sanitary sewer. Prior to discharge, the treated waste streammore » was sampled and the results were reviewed by LLNL's water monitoring specialists. The treated solution was discharged following confirmation that it met the discharge criteria. A major source, accounting for 50% for this waste stream, is metal machining, cutting and grinding operations in the engineering machine shops in B321/B131. An additional 7% was from similar operations in B131 and B132S. This waste stream primarily contains metal cuttings from machined parts, machining coolant and water, with small amounts of tramp oil from the machining and grinding equipment. Several waste reduction measures for the B321 machine shop have been taken, including the use of a small point-of-use filtering/tramp-oil coalescing/UV-sterilization coolant recycling unit, and improved management techniques (testing and replenishing) for coolants. The recycling unit had some operational problems during 2006. The machine shop is planning to have it repaired in the near future. A major source, accounting for 50% for this waste stream, is metal machining, cutting and grinding operations in the engineering machine shops in B321/B131. An additional 7% was from similar operations in B131 and B132S. This waste stream primarily contains metal cuttings from machined parts, machining coolant and water, with small amounts of tramp oil from the machining and grinding equipment. Several waste reduction measures for the B321 machine shop have been taken, including the use of a small point-of-use filtering/tramp-oil coalescing/UV-sterilization coolant recycling unit, and improved management techniques (testing and replenishing) for coolants. The recycling unit had some operational problems during 2006. The machine shop is planning to have it repaired in the near future. Quarterly waste generation data prepared by the Environmental Protection Department's P2 Team are regularly provided to engineering shops as well as other facilities so that generators can track the effectiveness of their waste minimization efforts.« less

A&M. TAN607 second floor plan for hot shop. Roof of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607 second floor plan for hot shop. Roof of pool. Viewing window locations. Special equipment room. This drawing was re-drawn to show conditions in 1994. Ralph M. Parsons 902-3-ANP-607-A 101. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-060-00-693-106753 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

A mixed-method examination of food marketing directed towards children in Australian supermarkets.

PubMed

Campbell, Sarah; James, Erica L; Stacey, Fiona G; Bowman, Jennifer; Chapman, Kathy; Kelly, Bridget

2014-06-01

The purpose of this study was to determine the prevalence of children's food requests, and parents' experiences of food marketing directed towards children, in the supermarket environment. A mixed-method design was used. Firstly, intercept interviews were conducted with parents accompanied by a child/children on exiting supermarkets (sampled from a large regional centre in Australia). Parents were asked about the prevalence and types of food requests by child/children during their supermarket visit and whether they purchased these foods. Secondly, focus groups (n = 13) and telephone interviews (n = 3) were conducted exploring parents' experiences of supermarket shopping with children and the impact of child-directed marketing. Of the 158 intercept survey participants (30% response rate), 73% reported a food request during the supermarket visit. Most requested food items (88%) were unhealthy foods, with chocolate/confectionery being the most common food category requested (40%). Most parents (70%) purchased at least one food item requested during the shopping trip. Qualitative interviews identified four themes associated with food requests and prompts in the supermarket: parents' experience of pester power in the supermarket; prompts for food requests in the supermarket; parental responses to pestering in the supermarket environment, and; strategies to manage pestering and minimize requests for food items. Food requests from children are common during supermarket shopping. Despite the majority of the requests being unhealthy, parents often purchase these foods. Parents reported difficulties dealing with constant requests and expressed desire for environmental changes including confectionery-free checkouts, minimization of child friendly product placement and reducing children's exposure to food marketing.

An overview of SAE ARP 1587: Aircraft gas turbine engine monitoring system guide

NASA Technical Reports Server (NTRS)

Murphy, J. A.

1981-01-01

A systematic approach to developing an engine monitoring system (EMS) is outlined. An extensive shopping list of EMS capabilities and benefits are included. A team approach to developing an EMS is emphasized with a description of the responsibilities of each team member.

View of hammer nameplate (Chambersburg Engineering Company, Chambersburg, Penna USA) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of hammer nameplate (Chambersburg Engineering Company, Chambersburg, Penna USA) and view north of Tony Talotta (heavy forger), Paul Azcharka (hammer operator), and Morty Hoffman (hammer operator helper) forging eyebolts. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Structure Shop, League Island, Philadelphia, Philadelphia County, PA

On salesmen and tourists: Two-step optimization in deterministic foragers

NASA Astrophysics Data System (ADS)

Maya, Miguel; Miramontes, Octavio; Boyer, Denis

2017-02-01

We explore a two-step optimization problem in random environments, the so-called restaurant-coffee shop problem, where a walker aims at visiting the nearest and better restaurant in an area and then move to the nearest and better coffee-shop. This is an extension of the Tourist Problem, a one-step optimization dynamics that can be viewed as a deterministic walk in a random medium. A certain amount of heterogeneity in the values of the resources to be visited causes the emergence of power-laws distributions for the steps performed by the walker, similarly to a Lévy flight. The fluctuations of the step lengths tend to decrease as a consequence of multiple-step planning, thus reducing the foraging uncertainty. We find that the first and second steps of each planned movement play very different roles in heterogeneous environments. The two-step process improves only slightly the foraging efficiency compared to the one-step optimization, at a much higher computational cost. We discuss the implications of these findings for animal and human mobility, in particular in relation to the computational effort that informed agents should deploy to solve search problems.

A&M. TAN607. Elevation for secondphase expansion of A&M Building. Work ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607. Elevation for second-phase expansion of A&M Building. Work areas south of the Carpentry Shop. High-bay shop, decontamination room at south-most end. Approved by INEEL Classification Office for public release. Ralph M. Parsons 1299-5-ANP/GE-3-607-A 106. Date: August 1956. INEEL index code no. 034-0607-00-693-107166 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

General Mechanical Repair. Minor Automotive Maintenance. Volume 1. Teacher's Guide.

ERIC Educational Resources Information Center

East Texas State Univ., Commerce. Occupational Curriculum Lab.

Fourteen units on minor automotive maintenance are presented in this teacher's guide. The units are the following: introduction to minor automotive maintenance, shop safety, engine principles, fuel system operation and repair, electrical system, ignition system, lubrication system, engine cooling system, exhaust system, wheel bearings and tires,…

TEACHING ENGINEERING DESIGN, A STUDY OF JOBSHOP.

ERIC Educational Resources Information Center

ENTWISLE, DORIS R.; HUGGINS, W.H.

THE USE OF A COMPUTER PROGRAM BY ENGINEERING STUDENTS TO SIMULATE A JOB SHOP THAT MANUFACTURES ELECTRONIC DEVICES HAS INDICATED THAT SIMULATION METHODS OFFER REALISTIC ASSISTANCE IN TEACHING. EACH STUDENT IN THE STUDY SUBMITTED SPECIFICATIONS FOR A CIRCUIT DESIGN AND, FROM THE COMPUTER, RECEIVED PERFORMANCE ASSESSMENTS OF THE CIRCUIT WHICH…

Ototoxic occupational exposures for a stock car racing team: II. chemical surveys.

PubMed

Gwin, Kristin K; Wallingford, Kenneth M; Morata, Thais C; Van Campen, Luann E; Dallaire, Jacques; Alvarez, Frank J

2005-08-01

The National Institute for Occupational Safety and Health (NIOSH) conducted a series of surveys to evaluate occupational exposure to noise and potentially ototoxic chemical agents among members of a professional stock car racing team. Exposure assessments included site visits to the team's race shop and a worst-case scenario racetrack. During site visits to the race team's shop, area samples were collected to measure exposures to potentially ototoxic chemicals, including, organic compounds (typical of solvents), metals, and carbon monoxide (CO). Exposures to these chemicals were all below their corresponding Occupational Safety and Health Administration (OSHA) permissible exposure limits (PELs), NIOSH recommended exposure limits (RELs), and American Conference of Governmental Industrial Hygienists (ACGIH) threshold limit values (TLVs). During site visits to the racetrack, area and personal samples were collected for organic compounds, lead, and CO in and around the "pit" area where the cars undergo race preparation and service during the race. Exposures to organic compounds and lead were either nondetectable or too low to quantify. Twenty-five percent of the CO time-weighted average concentrations exceeded the OSHA PEL, NIOSH REL, and ACGIH TLV after being adjusted for a 10-hour workday. Peak CO measurements exceeded the NIOSH recommended ceiling limit of 200 ppm. Based on these data, exposures to potentially ototoxic chemicals are probably not high enough to produce an adverse effect greater than that produced by the high sound pressure levels alone. However, carbon monoxide levels occasionally exceeded all evaluation criteria at the racetrack.

Street choice logit model for visitors in shopping districts.

PubMed

Kawada, Ko; Yamada, Takashi; Kishimoto, Tatsuya

2014-09-01

In this study, we propose two models for predicting people's activity. The first model is the pedestrian distribution prediction (or postdiction) model by multiple regression analysis using space syntax indices of urban fabric and people distribution data obtained from a field survey. The second model is a street choice model for visitors using multinomial logit model. We performed a questionnaire survey on the field to investigate the strolling routes of 46 visitors and obtained a total of 1211 street choices in their routes. We proposed a utility function, sum of weighted space syntax indices, and other indices, and estimated the parameters for weights on the basis of maximum likelihood. These models consider both street networks, distance from destination, direction of the street choice and other spatial compositions (numbers of pedestrians, cars, shops, and elevation). The first model explains the characteristics of the street where many people tend to walk or stay. The second model explains the mechanism underlying the street choice of visitors and clarifies the differences in the weights of street choice parameters among the various attributes, such as gender, existence of destinations, number of people, etc. For all the attributes considered, the influences of DISTANCE and DIRECTION are strong. On the other hand, the influences of Int.V, SHOPS, CARS, ELEVATION, and WIDTH are different for each attribute. People with defined destinations tend to choose streets that "have more shops, and are wider and lower". In contrast, people with undefined destinations tend to choose streets of high Int.V. The choice of males is affected by Int.V, SHOPS, WIDTH (positive) and CARS (negative). Females prefer streets that have many shops, and couples tend to choose downhill streets. The behavior of individual persons is affected by all variables. The behavior of people visiting in groups is affected by SHOP and WIDTH (positive).

Street Choice Logit Model for Visitors in Shopping Districts

PubMed Central

Kawada, Ko; Yamada, Takashi; Kishimoto, Tatsuya

2014-01-01

In this study, we propose two models for predicting people’s activity. The first model is the pedestrian distribution prediction (or postdiction) model by multiple regression analysis using space syntax indices of urban fabric and people distribution data obtained from a field survey. The second model is a street choice model for visitors using multinomial logit model. We performed a questionnaire survey on the field to investigate the strolling routes of 46 visitors and obtained a total of 1211 street choices in their routes. We proposed a utility function, sum of weighted space syntax indices, and other indices, and estimated the parameters for weights on the basis of maximum likelihood. These models consider both street networks, distance from destination, direction of the street choice and other spatial compositions (numbers of pedestrians, cars, shops, and elevation). The first model explains the characteristics of the street where many people tend to walk or stay. The second model explains the mechanism underlying the street choice of visitors and clarifies the differences in the weights of street choice parameters among the various attributes, such as gender, existence of destinations, number of people, etc. For all the attributes considered, the influences of DISTANCE and DIRECTION are strong. On the other hand, the influences of Int.V, SHOPS, CARS, ELEVATION, and WIDTH are different for each attribute. People with defined destinations tend to choose streets that “have more shops, and are wider and lower”. In contrast, people with undefined destinations tend to choose streets of high Int.V. The choice of males is affected by Int.V, SHOPS, WIDTH (positive) and CARS (negative). Females prefer streets that have many shops, and couples tend to choose downhill streets. The behavior of individual persons is affected by all variables. The behavior of people visiting in groups is affected by SHOP and WIDTH (positive). PMID:25379274

JSC engineers visit area schools for National Engineers Week

NASA Image and Video Library

1996-02-28

Johnson Space Center (JSC) engineers visit Houston area schools for National Engineers Week. Students examine a machine that generates static electricity (4296-7). Students examine model rockets (4298).

Factors influencing choice of care-seeking for acute fever comparing private chemical shops with health centres and hospitals in Ghana: a study using case-control methodology.

PubMed

Ansah, Evelyn K; Gyapong, Margaret; Narh-Bana, Solomon; Bart-Plange, Constance; Whitty, Christopher J M

2016-05-25

Several public health interventions to improve management of patients with fever are largely focused on the public sector yet a high proportion of patients seek care outside the formal healthcare sector. Few studies have provided information on the determinants of utilization of the private sector as against formal public sector. Understanding the differences between those who attend public and private health institutions, and their pathway to care, has significant practical implications. The chemical shop is an important source of care for acute fever in Ghana. Case-control methodology was used to identify factors associated with seeking care for fever in the Dangme West District, Ghana. People presenting to health centres, or hospital outpatients, with a history or current fever were compared to counterparts from the same community with fever visiting a chemical shop. Of 600 patients, 150 each, were recruited from the district hospital and two health centres, respectively, and 300 controls from 51 chemical shops. Overall, 103 (17.2 %) patients tested slide positive for malaria. Specifically, 13.7 % (41/300) of chemical shop patients, 30.7 % (46/150) health centre and 10.7 % (16/150) hospital patients were slide positive. While it was the first option for care for 92.7 % (278/300) chemical shop patients, 42.7 % (64/150) of health centre patients first sought care from a chemical shop. More health centre patients (61.3 %; 92/150) presented with fever after more than 3 days than chemical shop patients (27.7 %; 83/300) [AOR = 0.19; p < 0.001 CI 0.11-0.30]. Although the hospital was the first option for 83.3 % (125/150) of hospital patients, most (63.3 %; 95/150) patients arrived there over 3 days after their symptoms begun. Proximity was significantly associated with utilization of each source of care. Education, but not other socioeconomic or demographic factors were significantly associated with chemical shop use. The private drug retail sector is the first option for the majority of patients, including poorer patients, with fever in this setting. Most patients with fever arrive at chemical shops with less delay and fewer signs of severity than at public health facilities. Improving chemical shop skills is a good opportunity to diagnose, treat or refer people with fever early.

Care-seeking at patent and proprietary medicine vendors in Nigeria.

PubMed

Prach, Lisa M; Treleaven, Emily; Isiguzo, Chinwoke; Liu, Jenny

2015-06-12

To achieve health development goals, policymakers are increasingly focused on improving primary care in low- and middle-income countries, and private sector drug retailers offer one channel through which basic services may be delivered. In Nigeria, patent and proprietary medicine vendors (PPMVs) serve as a main source of medications, but little is known about their clientele or how care is sought at PPMVs for common illnesses. We explore differences in care-seeking at PPMV shops based on the most commonly reported symptoms. In Kogi and Kwara states, Nigeria, 250 PPMV shop workers and 2,359 customers purchasing drugs were surveyed, and each worker-customer interaction was observed. Multivariate regression analysis was used to assess the association of commonly reported symptoms with care-seeking behavior prior to attending the shop and while interacting with the provider at the shop. Most customers sought care for headache (30.5 %), fever (22.9 %), cough/cold (18.1 %), or diarrhea (8.4 %). Customers with fever were more likely to report being diagnosed by a formally trained person, to have discussed the illness with and be examined by the shop worker, and have more difficulty paying. In contrast, customers with headache symptoms were less likely to experience these outcomes and spent less money purchasing drugs. Those reporting cough or cold symptoms were less likely to have been diagnosed by a formally trained person, waited longer before visiting the PPMV shop, and were more likely to discuss the illness with the shop worker, but were less likely to be examined or to recommend the purchased drug themselves. If a sick child was brought to the shop, a discussion of the illness and an exam were more likely and more money was spent on drugs. Because care-seeking behaviors vary by symptoms and the sick person's age, PPMVs should be trained to treat common illnesses for which customers are unlikely to seek a formal medical consultation. Interventions aimed at improving primary care need to target the places where most people access care, and equip PPMV workers with knowledge and tools to provide basic services.

KSC-2011-6515

NASA Image and Video Library

2011-08-18

CAPE CANAVERAL, Fla. -- In the Engine Shop at NASA’s Kennedy Space Center in Florida, space shuttle main engine #2 sits on a transporter after technicians removed it from space shuttle Atlantis in Orbiter Processing Facility-2. All three main engines are being removed from Atlantis so that the vehicle can be decommissioned and prepared for eventual display at the Kennedy Space Center Visitor Complex in Florida. Photo credit: Frankie Martin

Consumer Poultry Handling Behavior in the Grocery Store and In-Home Storage.

PubMed

Donelan, Amy K; Chambers, Delores H; Chambers, Edgar; Godwin, Sandria L; Cates, Sheryl C

2016-04-01

Considerable work on consumers' food safety habits has highlighted issues associated with home food preparation. However, consumer handling of foods, such as poultry, during shopping and storage has not been noted. The objective of this study was to determine consumer behaviors during purchasing and initial storage of raw poultry to determine potential cross-contamination issues. A shop-along observational study was conducted to determine actual shopping, transportation, and storage behavior of consumers who purchase raw poultry products. Neither hand sanitizer nor wipes were observed in 71% of grocery store meat sections of stores visited. Plastic bags could be found in the meat section 85% of the time, but only 25% of shoppers used the bag for their raw poultry purchases. During checkout, the poultry was bagged separately from other products 71% of the time. A majority of shoppers stored raw poultry in the original package without an additional container or overwrap. Overall, there needs to be an increase in food safety education on the handling of poultry during purchasing, transportation, and storage.

Virtual Factory Framework for Supporting Production Planning and Control.

PubMed

Kibira, Deogratias; Shao, Guodong

2017-01-01

Developing optimal production plans for smart manufacturing systems is challenging because shop floor events change dynamically. A virtual factory incorporating engineering tools, simulation, and optimization generates and communicates performance data to guide wise decision making for different control levels. This paper describes such a platform specifically for production planning. We also discuss verification and validation of the constituent models. A case study of a machine shop is used to demonstrate data generation for production planning in a virtual factory.

8. Credit USAF, ca. 1945. Original housed in the Muroc ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. Credit USAF, ca. 1945. Original housed in the Muroc Flight Test Base, Unit History, 1 September 1942 - 30 June 1945. Alfred F. Simpson Historical Research Agency. United States Air Force. Maxwell AFB, Alabama. View of concrete base for jet engine rotor balancing machine. Location where photograph was taken not determined, but presumed to be in shops of Building 4505 which had a sizeable machine shop. - Edwards Air Force Base, North Base, Hangar, End of North Base Road, Boron, Kern County, CA

Engineering Safety- and Security-Related Requirements for Software-Intensive Systems

DTIC Science & Technology

2007-05-31

University Very Large New Zoo Parking Lots Zoo Back Lots Restaurants and Shops Tropical Rainforest African SavannaChildren’s Petting Area Monkeys Great Apes...decide to ride to the Great Apes and Monkeys taxi station near the central shops and restaurants area. Mr. Smith then swipes his zoo taxi travel card...taxi station on their right, circles around the central area, and soon pulls off the Zoo Loop Line to enter the inner Great Apes and Monkeys taxi

Manufacturing engineering: Principles for optimization

NASA Astrophysics Data System (ADS)

Koenig, Daniel T.

Various subjects in the area of manufacturing engineering are addressed. The topics considered include: manufacturing engineering organization concepts and management techniques, factory capacity and loading techniques, capital equipment programs, machine tool and equipment selection and implementation, producibility engineering, methods, planning and work management, and process control engineering in job shops. Also discussed are: maintenance engineering, numerical control of machine tools, fundamentals of computer-aided design/computer-aided manufacture, computer-aided process planning and data collection, group technology basis for plant layout, environmental control and safety, and the Integrated Productivity Improvement Program.

Engines. FOS: Fundamentals of Service.

ERIC Educational Resources Information Center

John Deere Co., Moline, IL.

This manual on engines is one of a series of power mechanics texts and visual aids for training in servicing of farm and industrial machinery. (Automotive, truck, and bus applications are often covered as well.) Materials provide basic information and illustrations for use by vocational students and teachers as well as shop servicemen and laymen.…

77 FR 2932 - Airworthiness Directives; Rolls-Royce plc (RR) Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-20

...-pressure (IP) compressor rotor shaft rear balance land for cracks, which could lead to engine failure. This... and when in the shop, repetitive eddy current inspections (ECIs) for cracks on the rear balance land... for cracks on the rear balance land. That NPRM also proposed certain optional terminating actions...

East European Military Establishments: The Warsaw Pact Northern Tier.

DTIC Science & Technology

1980-12-01

grant is contributing to student fellowships for dissertation preparation, curriculum development, work- shops and tutorials, and a series of visiting...assistance is a source of consid- erable professional satisfaction for the Polish militarv officer and as such constitutes a source of solidaritv...with the Soviet military. Yet there is clear evidence that in the mid-1960s considerable dis- satisfaction existed within the Polish officer corns

Religious Radicalism and Security in South Asia

DTIC Science & Technology

2004-01-01

terrorists from visiting “schools, colleges … theaters, cinemas , fairs, amusement parks, hotels, clubs, restaurants, tea shops … railway stations...captured one Malaysian and one or two supporters from Burma.”45 428 BERTIL LINTNER 41. See also Jim Garamone, “Bin Laden and the Al-Qaeda Network...history, tragedy, drama, comedy, mime, painting, stained glass windows, cinema , comics, news items, and conversation. See Roland Barthes, “Introduction

Knowledge and practices of barbers regarding HIV transmission in Karachi: a cross-sectional study.

PubMed

Bawany, Faizan Imran; Khan, Muhammad Shahzeb; Shoaib, Atif Bilal; Naeem, Muhammad; Kazi, Abdul Nafey; Shehzad, Abdul Moid

2014-10-01

A barber shop is a potential place for non-sexual transmission of deadly blood borne diseases such as acquired immuno-deficient syndrome. Few researches have been conducted to assess the knowledge of barbers regarding human immunodeficiency virus (HIV) transmission in Pakistan. With majority of the population visiting roadside saloons, it is imperative to have local data in this regard. The objective of this study was to investigate the knowledge and practices of barbers with reference to razor use and steps taken to sterilize their instruments. A total of 300 barber saloons were conveniently selected for this cross-sectional study during a time period of 5 months from May 2012 till September 2012. The shops were categorized into three groups: big saloons, small saloons and roadside saloons based on the inclusion criteria. One barber was randomly selected as a representative from each saloon. Data collection from each barber shop was carried out by an interviewer using a pre-coded questionnaire. Majority of the barbers had low school education. Awareness regarding sharing of blades as a route of HIV transmission was known by 90 % (n = 90) of big saloon barbers with awareness decreasing in small (n = 55) and roadside saloon barbers (n = 27). Only 60.3 % (n = 181) of the barbers used new blades between customers. In comparison to big saloon barbers, the majority (n = 53) of roadside saloon barbers used tap water for cleaning purposes. Only 40 % of the roadside barbers used antiseptic after shaving. The results of our study indicate that roadside saloon barbers, to whom majority of Pakistani population visit, have inadequate awareness regarding HIV transmission. Their poor barbering practices were mainly due to their low education. This potentiates a great risk for aggravating the HIV endemic in Pakistan.

Health Service Utilisation, Detection Rates by Family Practitioners, and Management of Patients with Common Mental Disorders in French Family Practice.

PubMed

Norton, Joanna; Engberink, Agnès Oude; Gandubert, Catherine; Ritchie, Karen; Mann, Anthony; David, Michel; Capdevielle, Delphine

2017-08-01

Provide up-to-date detection rates for common mental disorders (CMD) and examine patient service-use since the Preferred Doctor scheme was introduced to France in 2005, with patients encouraged to register with and consult a family practitioner (FP) of their choice. Study of 1133 consecutive patients consulting 38 FPs in the Montpellier region, replicating a study performed before the scheme. Patients in the waiting room completed the self-report Patient Health Questionnaire (PHQ) and Client Service-Receipt Inventory with questions on registration with a Preferred Doctor and doctor-shopping. CMD was defined as reaching PHQ criteria for depression, somatoform, panic or anxiety disorder. For each patient, FPs completed a questionnaire capturing psychiatric caseness. 81.2% of patients were seeing their Preferred Doctor on the survey-day. Of those with a CMD, 52.6% were detected by the FP. This increased with CMD severity and comorbidity. Detected cases were more likely to be consulting their Preferred Doctor (84.7% versus 79.4% for non-detected cases, p = 0.05) rather than another FP. They declared more visits to psychiatrists (17.2% versus 6.7%, p = 0.002). There was no association with consultation frequency or doctor-shopping, which both declined between the two studies. The CMD detection rate is relatively high, with no increase compared to our previous study, despite a decline in doctor-shopping. An explanation is the same high proportion of patients visiting their usual FP on the survey-day at both periods, suggesting a limited impact of the scheme on care continuity. FP action taken highlights the importance of improving detection for providing care to patients with CMDs.

Health Service Utilisation, Detection Rates by Family Practitioners, and Management of Patients with Common Mental Disorders in French Family Practice

PubMed Central

Engberink, Agnès Oude; Gandubert, Catherine; Ritchie, Karen; Mann, Anthony; David, Michel; Capdevielle, Delphine

2017-01-01

Objective: Provide up-to-date detection rates for common mental disorders (CMD) and examine patient service-use since the Preferred Doctor scheme was introduced to France in 2005, with patients encouraged to register with and consult a family practitioner (FP) of their choice. Methods: Study of 1133 consecutive patients consulting 38 FPs in the Montpellier region, replicating a study performed before the scheme. Patients in the waiting room completed the self-report Patient Health Questionnaire (PHQ) and Client Service-Receipt Inventory with questions on registration with a Preferred Doctor and doctor-shopping. CMD was defined as reaching PHQ criteria for depression, somatoform, panic or anxiety disorder. For each patient, FPs completed a questionnaire capturing psychiatric caseness. Results: 81.2% of patients were seeing their Preferred Doctor on the survey-day. Of those with a CMD, 52.6% were detected by the FP. This increased with CMD severity and comorbidity. Detected cases were more likely to be consulting their Preferred Doctor (84.7% versus 79.4% for non-detected cases, p = 0.05) rather than another FP. They declared more visits to psychiatrists (17.2% versus 6.7%, p = 0.002). There was no association with consultation frequency or doctor-shopping, which both declined between the two studies. Conclusion: The CMD detection rate is relatively high, with no increase compared to our previous study, despite a decline in doctor-shopping. An explanation is the same high proportion of patients visiting their usual FP on the survey-day at both periods, suggesting a limited impact of the scheme on care continuity. FP action taken highlights the importance of improving detection for providing care to patients with CMDs. PMID:28107037

Action Memorandum for Decommissioning of TAN-607 Hot Shop Area

DOE Office of Scientific and Technical Information (OSTI.GOV)

M. A. Pinzel

The Department of Energy is documenting the selection of an alternative for the TAN-607 Hot Shop Area using a Comprehensive Environmental Response, Compensation, and Liability Act non-time-critical removal action (NTCRA). The scope of the removal action is limited to TAN-607 Hot Shop Area. An engineering evaluation/cost analysis (EE/CA) has assisted the Department of Energy Idaho Operations Office in identifuomg the most effective method for performing the decommissioning of this structure whose mission has ended. TAN-607 Hot Shop Area is located at Test Area North Technical Support Facility within the Idaho National Laboratory Site. The selected alternative consists of demolishing themore » TAN-607 aboveground structures and components, removing belowground noninert components (e.g. wood products), and removing the radiologically contaminated debris that does not meet remedial action objectives (RAOs), as defined in the Record of Decision Amendment for the V-Tanks and Explanation of Significant Differences for the PM-2A Tanks at Test Area North, Operable Unit 1-10.« less

Patterns of ambulatory care utilization in Taiwan.

PubMed

Chen, Tzeng-Ji; Chou, Li-Fang; Hwang, Shinn-Jang

2006-05-04

We used the insurance claims of a representative cohort to quantify the patterns of ambulatory care visits, especially the doctor-shopping phenomenon, in Taiwan. The ambulatory visit files of the 200,000-person cohort datasets from the National Health Insurance Research Database in 2002 were analyzed. Only a visit with physician consultation would be considered. We computed the visit patterns both by visit count and by patient count. In 2002, there were 182,474 eligible people with 2,443,003 physician consultations. During the year, 87.4% of the cohort had visited physician clinics and 57.5% had visited hospital-based outpatient or emergency departments. On average, a person had 13.4 physician consultations and consulted 3.4 specialties, 5.2 physicians, and 3.9 healthcare facilities in a year. In 2002, 17.3% of the cohort had ever visited different healthcare facilities on the same day; 23.5% had ever visited physicians of the same specialty at different healthcare facilities within 7 days and the percentage of second visits was 3.8% of all visits. Besides, 7.6% of the cohort had visited two or more specialties at the same facility on the same day, and such visits make up 2.5% of all visits. The people in Taiwan did visit the physicians and outpatient departments frequently. Many patients not only consulted several physicians of different specialties and at different healthcare facilities during the year, but also switched the physicians and facilities quickly. An effective referral system with efficient data exchange between facilities might be the solution.

Women's ability to self-screen for contraindications to combined oral contraceptive pills in Tanzanian drug shops.

PubMed

Chin-Quee, Dawn; Ngadaya, Esther; Kahwa, Amos; Mwinyiheri, Thomas; Otterness, Conrad; Mfinanga, Sayoki; Nanda, Kavita

2013-10-01

To estimate the accuracy of self-screening for contraindications to combined oral contraceptive pills (COCs) and to estimate the proportion of women with contraindications to hormonal methods among those using drug shops in Tanzania. Trained nurses interviewed 1651 women aged 18-39 years who self-screened for contraindications to COCs with the help of a poster at drug shops in Tanzania. Nurse assessment of the women served as the gold standard for comparison with self-assessment. Blood pressure was also measured onsite. Nurses reported that 437 (26.5%) women were not eligible to use COCs, compared with 485 (29.4%) according to self-report. Overall, 133 (8.1%) women who said that they were eligible were deemed ineligible by nurses. The rate of ineligibility was artificially high owing to participant and nurse assessments that were incorrectly based on adverse effects of pill use and cultural reasons, and because of the sampling procedure, which intercepted women regardless of their reasons for visiting the drug shop. Adjusted rates of ineligibility were 8.6% and 12.7%, respectively, according to nurse and participant assessment. Both nurses and women underestimated the prevalence of hypertension in the present group. Self-screening among women in rural and peri-urban Tanzania with regard to contraindications to COC use was comparable to assessment by trained nurses. © 2013.

Do chain pharmacies perform better than independent pharmacies? Evidence from a standardised patient study of the management of childhood diarrhoea and suspected tuberculosis in urban India.

PubMed

Miller, Rosalind; Goodman, Catherine

2017-01-01

Pharmacies and drug stores are frequently patients' first point of care in many low-income and middle-income countries, but their practice is often poor. Pharmacy retailing in India has traditionally been dominated by local, individually owned shops, but recent years have seen the growth of pharmacy chains. In theory, lower-powered profit incentives and self-regulation to preserve brand identity may lead to higher quality in chain stores. In practice, this has been little studied. We randomly selected a stratified sample of chain and independent pharmacies in urban Bengaluru. Standardised patients (SPs) visited pharmacies and presented a scripted case of diarrhoea for a child and suspected tuberculosis (TB). SPs were debriefed immediately after the visit using a structured questionnaire. We measured the quality of history taking, therapeutic management and advice giving against national (Government of India) and international (WHO) guidelines. We used Pearson's χ 2 tests to examine associations between pharmacy type and case management. Management of childhood diarrhoea and suspected TB was woefully substandard. History taking of the SP was limited; unnecessary and harmful medicines, including antibiotics, were commonly sold; and advice giving was near non-existent. The performance of chains and independent shops was strikingly similar for most areas of assessment. We observed no significant differences between the management of suspected TB in chains and independents. 43% of chains and 45% of independents managed the TB case correctly; 17% and 16% of chains and independents, respectively, sold antibiotics. We found that chains sold significantly fewer harmful antibiotics and antidiarrhoeals (35% vs 48%, p=0.029) and prescription-only medicines (37% vs 49%, p=0.048) for the patient with diarrhoea compared with independent shops. Not a single shop managed the patient with diarrhoea correctly according to guidelines. Our results from Bengaluru suggest that it is unlikely that chains alone can solve persisting quality challenges. However, they may offer a potential vehicle through which to deliver interventions. Future intervention research should consider recruiting chains to see whether effectiveness of interventions differ among chains compared with independents.

Do chain pharmacies perform better than independent pharmacies? Evidence from a standardised patient study of the management of childhood diarrhoea and suspected tuberculosis in urban India

PubMed Central

Miller, Rosalind; Goodman, Catherine

2017-01-01

Introduction Pharmacies and drug stores are frequently patients’ first point of care in many low-income and middle-income countries, but their practice is often poor. Pharmacy retailing in India has traditionally been dominated by local, individually owned shops, but recent years have seen the growth of pharmacy chains. In theory, lower-powered profit incentives and self-regulation to preserve brand identity may lead to higher quality in chain stores. In practice, this has been little studied. Methods We randomly selected a stratified sample of chain and independent pharmacies in urban Bengaluru. Standardised patients (SPs) visited pharmacies and presented a scripted case of diarrhoea for a child and suspected tuberculosis (TB). SPs were debriefed immediately after the visit using a structured questionnaire. We measured the quality of history taking, therapeutic management and advice giving against national (Government of India) and international (WHO) guidelines. We used Pearson’s χ2 tests to examine associations between pharmacy type and case management. Findings Management of childhood diarrhoea and suspected TB was woefully substandard. History taking of the SP was limited; unnecessary and harmful medicines, including antibiotics, were commonly sold; and advice giving was near non-existent. The performance of chains and independent shops was strikingly similar for most areas of assessment. We observed no significant differences between the management of suspected TB in chains and independents. 43% of chains and 45% of independents managed the TB case correctly; 17% and 16% of chains and independents, respectively, sold antibiotics. We found that chains sold significantly fewer harmful antibiotics and antidiarrhoeals (35% vs 48%, p=0.029) and prescription-only medicines (37% vs 49%, p=0.048) for the patient with diarrhoea compared with independent shops. Not a single shop managed the patient with diarrhoea correctly according to guidelines. Conclusion Our results from Bengaluru suggest that it is unlikely that chains alone can solve persisting quality challenges. However, they may offer a potential vehicle through which to deliver interventions. Future intervention research should consider recruiting chains to see whether effectiveness of interventions differ among chains compared with independents. PMID:29018588

7. DETAIL, WINDOWS AND SAFETY LADDER AT RECEIVING DEPARTMENT, NORTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. DETAIL, WINDOWS AND SAFETY LADDER AT RECEIVING DEPARTMENT, NORTH SIDE, NEAR WEST END. - United Engineering Company Shipyard, Inspection & Repair Shops, 2900 Main Street, Alameda, Alameda County, CA

5. Plat of Carlin Shops, 1884. Copied from Central Pacific ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Plat of Carlin Shops, 1884. Copied from Central Pacific Railroad bound book of station plats entitled 'Station Plans, CPRR, Mill City to Ogden,' in collection of Nevada Historical Society, Reno; credit Nevada Historical Society. Caption reads, 'Sand House - Hose Carriage Ho. - Casting Shed - Tank 'h' - Coal Shed 'I' and Iron Rack - finished in Oct. 1882. Tank 'c' built Nov. 1883 - Old Tank opp. & near main track taken down Nov. '83. E.C. Pierce's boarding house built May 1884. 172' old 1' pipe laid to Boarding house May 1884. 142 ft. 1' gas pipe - 2 Globe Valves laid to Div. Sup'ts Office Sept 1884.' Engine Stores Building is shown as building k. - Southern Pacific Railroad, Carlin Shops, Foot of Sixth Street, Carlin, Elko County, NV

General Mechanical Repair. Minor Automotive Maintenance, Small Engine [Repair, and] Welding: Student Manual.

ERIC Educational Resources Information Center

Hamlin, Larry

This document is a student manual for a general mechanical repair course. Following a list of common essential elements of trade and industrial education, the manual is divided into three sections. The first section, on minor automotive maintenance, contains 13 units: automotive shop safety; engine principles; fuel system operation and repair;…

Home school student visit and introduction to rail transportation and engineering.

DOT National Transportation Integrated Search

2016-06-22

This project consisted of hosting local Champaign-Urbana, Illinois home school students for a visit to : the Rail Transportation and Engineering Center (RailTEC) at the University of Illinois at Urbana- : Champaign (UIUC). Beyond visiting RailTEC, st...

Indoor air quality at nine shopping malls in Hong Kong.

PubMed

Li, W M; Lee, S C; Chan, L Y

2001-06-12

Hong Kong is one of the most attractive shopping paradises in the world. Many local people and international tourists favor to spend their time in shopping malls in Hong Kong. Good indoor air quality is, therefore, very essential to shoppers. In order to characterize the indoor air quality in shopping malls, nine shopping malls in Hong Kong were selected for this study. The indoor air pollutants included carbon dioxide (CO2), carbon monoxide (CO), total hydrocarbons (THC), formaldehyde (HCHO), respirable particulate matter (PM10) and total bacteria count (TBC). More than 40% of the shopping malls had 1-h average CO2 levels above the 1000 ppm of the ASHRAE standard on both weekdays and weekends. Also, they had average weekday PM10 concentrations that exceeded the Hong Kong Indoor Air Quality Objective (HKIAQO). The highest indoor PM10 level at a mall was 380 microg/m3. Of the malls surveyed, 30% had indoor airborne bacteria levels above 1000 cfu/m3 set by the HKIAQO. The elevated indoor CO2 and bacteria levels could result from high occupancy combined with insufficient ventilation. The increased PM10 levels could be probably attributed to illegal smoking inside these establishments. In comparison, the shopping malls that contained internal public transport drop-off areas, where vehicles were parked with idling engines and had major entry doors close to heavy traffic roads had higher CO and PM10 indoor levels. In addition, the extensive use of cooking stoves without adequate ventilation inside food courts could increase indoor CO2, CO and PM10 levels.

The predictability of consumer visitation patterns

NASA Astrophysics Data System (ADS)

Krumme, Coco; Llorente, Alejandro; Cebrian, Manuel; Pentland, Alex ("Sandy"); Moro, Esteban

2013-04-01

We consider hundreds of thousands of individual economic transactions to ask: how predictable are consumers in their merchant visitation patterns? Our results suggest that, in the long-run, much of our seemingly elective activity is actually highly predictable. Notwithstanding a wide range of individual preferences, shoppers share regularities in how they visit merchant locations over time. Yet while aggregate behavior is largely predictable, the interleaving of shopping events introduces important stochastic elements at short time scales. These short- and long-scale patterns suggest a theoretical upper bound on predictability, and describe the accuracy of a Markov model in predicting a person's next location. We incorporate population-level transition probabilities in the predictive models, and find that in many cases these improve accuracy. While our results point to the elusiveness of precise predictions about where a person will go next, they suggest the existence, at large time-scales, of regularities across the population.

The predictability of consumer visitation patterns

PubMed Central

Krumme, Coco; Llorente, Alejandro; Cebrian, Manuel; Pentland, Alex ("Sandy"); Moro, Esteban

2013-01-01

We consider hundreds of thousands of individual economic transactions to ask: how predictable are consumers in their merchant visitation patterns? Our results suggest that, in the long-run, much of our seemingly elective activity is actually highly predictable. Notwithstanding a wide range of individual preferences, shoppers share regularities in how they visit merchant locations over time. Yet while aggregate behavior is largely predictable, the interleaving of shopping events introduces important stochastic elements at short time scales. These short- and long-scale patterns suggest a theoretical upper bound on predictability, and describe the accuracy of a Markov model in predicting a person's next location. We incorporate population-level transition probabilities in the predictive models, and find that in many cases these improve accuracy. While our results point to the elusiveness of precise predictions about where a person will go next, they suggest the existence, at large time-scales, of regularities across the population. PMID:23598917

Quit and Smoking Reduction Rates in Vape Shop Consumers: A Prospective 12-Month Survey

PubMed Central

Polosa, Riccardo; Caponnetto, Pasquale; Cibella, Fabio; Le-Houezec, Jacques

2015-01-01

Aims: Here, we present results from a prospective pilot study that was aimed at surveying changes in daily cigarette consumption in smokers making their first purchase at vape shops. Modifications in products purchase were also noted. Design: Participants were instructed how to charge, fill, activate and use their e-cigarettes (e-cigs). Participants were encouraged to use these products in the anticipation of reducing the number of cig/day smoked. Settings: Staff from LIAF contacted 10 vape shops in the province of the city of Catania (Italy) that acted as sponsors to the 2013 No Tobacco Day. Participants: 71 adult smokers (≥18 years old) making their first purchase at local participating vape shops were asked by professional retail staff to complete a form. Measurements: Their cigarette consumption was followed-up prospectively at 6 and 12 months. Details of products purchase (i.e., e-cigs hardware, e-liquid nicotine strengths and flavours) were also noted. Findings: Retention rate was elevated, with 69% of participants attending their final follow-up visit. At 12 month, 40.8% subjects could be classified as quitters, 25.4% as reducers and 33.8% as failures. Switching from standard refillables (initial choice) to more advanced devices (MODs) was observed in this study (from 8.5% at baseline to 18.4% at 12 month) as well as a trend in decreasing the e-liquid nicotine strength, with more participants adopting low nicotine strength (from 49.3% at baseline to 57.1% at 12 month). Conclusions: We have found that smokers purchasing e-cigarettes from vape shops with professional advice and support can achieve high success rates. PMID:25811767

'It puts life in us and we feel big': shifts in the local health care system during the introduction of rapid diagnostic tests for malaria into drug shops in Uganda.

PubMed

Hutchinson, Eleanor; Chandler, Clare; Clarke, Siân; Lal, Sham; Magnussen, Pascal; Kayendeke, Miriam; Nabirye, Christine; Kizito, James; Mbonye, Anthony

2015-01-01

This paper is an analysis of the social interaction between drug sellers, their clients and local health care workers within a medical trial that introduced rapid diagnostic tests for malaria into private sector drug shops in Mukono District, Uganda. It locates the introduction of a new technology to test blood and a system of referral within the context of local concerns about the choice and evaluation of treatment; and the socially legitimated statuses, roles and hierarchies within the local health care system. Based on the multi-layered interpretation of 21 focus group discussions, we describe three key aspects of the trial central to local interpretation: openly testing blood, supervisory visits to drug shops and a new referral form. Each had the potential to shift drug shop vendors from outsider to insider of the formal health service. The responses of the different groups of participants reflect their situation within the health care system. The clients and patients welcomed the local availability of new diagnostic technology and the apparent involvement of the government in securing good quality health services for them from providers with often uncertain credentials. The drug shop vendors welcomed the authorization to openly test blood, enabling the demonstration of a new skill and newfound legitimacy as a health worker rather than simple drug seller. Formal sector health workers were less enthusiastic about the trial, raising concerns about professional hierarchies and the maintenance of a boundary around the formal health service to ensure the exclusion of those they considered untrained, unprofessional and untrustworthy personnel.

‘It puts life in us and we feel big’: shifts in the local health care system during the introduction of rapid diagnostic tests for malaria into drug shops in Uganda

PubMed Central

Hutchinson, Eleanor; Chandler, Clare; Clarke, Siân; Lal, Sham; Magnussen, Pascal; Kayendeke, Miriam; Nabirye, Christine; Kizito, James; Mbonye, Anthony

2015-01-01

This paper is an analysis of the social interaction between drug sellers, their clients and local health care workers within a medical trial that introduced rapid diagnostic tests for malaria into private sector drug shops in Mukono District, Uganda. It locates the introduction of a new technology to test blood and a system of referral within the context of local concerns about the choice and evaluation of treatment; and the socially legitimated statuses, roles and hierarchies within the local health care system. Based on the multi-layered interpretation of 21 focus group discussions, we describe three key aspects of the trial central to local interpretation: openly testing blood, supervisory visits to drug shops and a new referral form. Each had the potential to shift drug shop vendors from outsider to insider of the formal health service. The responses of the different groups of participants reflect their situation within the health care system. The clients and patients welcomed the local availability of new diagnostic technology and the apparent involvement of the government in securing good quality health services for them from providers with often uncertain credentials. The drug shop vendors welcomed the authorization to openly test blood, enabling the demonstration of a new skill and newfound legitimacy as a health worker rather than simple drug seller. Formal sector health workers were less enthusiastic about the trial, raising concerns about professional hierarchies and the maintenance of a boundary around the formal health service to ensure the exclusion of those they considered untrained, unprofessional and untrustworthy personnel. PMID:25632175

Associations between frequency of food shopping at different store types and diet and weight outcomes: findings from the NEWPATH study.

PubMed

Minaker, Leia M; Olstad, Dana L; Thompson, Mary E; Raine, Kim D; Fisher, Pat; Frank, Lawrence D

2016-08-01

The present study aimed to: (i) examine associations between food store patronage and diet and weight-related outcomes; and (ii) explore consumer motivations for visiting different types of food store. A stratified probability sample of residents completed household and individual-level surveys in 2009/2010 on food purchasing patterns and motivations, dietary intake, waist circumference (WC), weight and height. Diet quality was calculated using the Healthy Eating Index for Canada from a subset of participants (n 1362). Generalized estimating equations were created in 2015 to examine how frequency of patronizing different types of food store was associated with diet quality, intake of fruits and vegetable, mean intake of energy (kcal) sodium and saturated fat, WC and BMI. Three mid-sized urban municipalities in Ontario, Canada. A representative sample of residents (n 4574). Participants who shopped frequently at food co-ops had significantly better diet quality (β=5·3; 99 % CI 0·3, 10·2) than those who did not. BMI and WC were significantly lower among those who frequently shopped at specialty shops (BMI, β=-2·1; 99 % CI -3·0, -1·1; WC, β=-4·8; 99 % CI -7·0, -2·5) and farmers' markets (BMI, β=-1·4; 99 % CI -2·3, -0·5; WC, β=-3·8; 99 % CI -6·0, -1·6) compared with those who did not. Relative importance of reasons for food outlet selection differed by large (price, food quality) v. small (proximity, convenient hours) shopping trip and by outlet type. Findings contribute to our understanding of food store selection and have implications for potentially relevant retail food intervention settings.

Environmental conditions around itineraries to destinations as correlates of walking for transportation among adults: the RECORD cohort study.

PubMed

Karusisi, Noëlla; Thomas, Frédérique; Méline, Julie; Brondeel, Ruben; Chaix, Basile

2014-01-01

Assessing the contextual factors that influence walking for transportation is important to develop more walkable environments and promote physical activity. To advance previous research focused on residential environments and overall walking for transportation, the present study investigates objective environmental factors assessed around the residence, the workplace, the home--work itinerary, and the home--supermarket itinerary, and considered overall walking for transportation but also walking to work and to shops. Data from the RECORD Study involving 7290 participants recruited in 2007-2008, aged 30-79 years, and residing in the Paris metropolitan area were analyzed. Multilevel ordinal regression analyses were conducted to investigate environmental characteristics associated with self-reported overall walking for transportation, walking to work, and walking to shops. High individual education was associated with overall walking for transportation, with walking to work, and walking to shops. Among workers, a high residential neighborhood education was associated with increased overall walking for transportation, while a high workplace neighborhood education was related to an increased time spent walking to work. The residential density of destinations was positively associated with overall walking for transportation, with walking to work, and with walking to shops, while the workplace density of destinations was positively associated with overall walking for transportation among workers. Environmental factors assessed around the itineraries were not associated with walking to work or to the shops. This research improves our understanding of the role of the environments on walking for transportation by accounting for some of the environments visited beyond the residential neighborhood. It shows that workers' walking habits are more influenced by the density of destinations around the workplace than around the residence. These results provide insight for the development of policies and programs to encourage population level active commuting.

Reaching youth at the point of sale: cigarette marketing is more prevalent in stores where adolescents shop frequently

PubMed Central

Henriksen, L; Feighery, E; Schleicher, N; Haladjian, H; Fortmann, S

2004-01-01

Objective: Although numerous studies describe the quantity and nature of tobacco marketing in stores, fewer studies examine the industry's attempts to reach youth at the point of sale. This study examines whether cigarette marketing is more prevalent in stores where adolescents shop frequently. Design, setting, and participants: Trained coders counted cigarette ads, products, and other marketing materials in a census of stores that sell tobacco in Tracy, California (n = 50). A combination of data from focus groups and in-class surveys of middle school students (n = 2125) determined which of the stores adolescents visited most frequently. Main outcome measures: Amount of marketing materials and shelf space measured separately for the three cigarette brands most popular with adolescent smokers and for other brands combined. Results: Compared to other stores in the same community, stores where adolescents shopped frequently contained almost three times more marketing materials for Marlboro, Camel, and Newport, and significantly more shelf space devoted to these brands. Conclusions: Regardless of whether tobacco companies intentionally target youth at the point of sale, these findings underscore the importance of strategies to reduce the quantity and impact of cigarette marketing materials in this venue. PMID:15333890

Consumer Nutrition Environments of Hospitals: An Exploratory Analysis Using the Hospital Nutrition Environment Scan for Cafeterias, Vending Machines, and Gift Shops, 2012

PubMed Central

Sallis, James F.; Swartz, Michael D.; Hoelscher, Deanna M.; Peskin, Melissa F.

2013-01-01

Introduction Hospitals are the primary worksite of over 5 million adults in the United States, and millions of meals are procured and consumed in this setting. Because many worksite nutrition initiatives use an ecological framework to improve the dietary habits of employees, the nutrition values of foods served in hospitals is receiving attention. Methods This study used the Hospital Nutrition Environment Scan for Cafeterias, Vending Machines, and Gift Shops to quantitatively describe the consumer nutrition environments of 39 hospitals in Southern California. Data were collected by visiting each facility once from February 2012 through May 2012. Results On average, hospitals achieved only 29%, 33%, and less than 1% of the total possible points for their cafeteria, vending machines, and gift shops sections, respectively; overall, hospitals scored 25% of the total possible points. Large facility size and contracted food service operations were associated with some healthy practices in hospital cafeterias, but we found no association between these variables and the sectional or overall nutrition composite scores. Conclusion The average consumer nutrition environment of hospitals in this sample was minimally conducive to healthful eating. Nutrition-related interventions are warranted in hospital settings. PMID:23823699

Reaching youth at the point of sale: cigarette marketing is more prevalent in stores where adolescents shop frequently.

PubMed

Henriksen, L; Feighery, E C; Schleicher, N C; Haladjian, H H; Fortmann, S P

2004-09-01

Although numerous studies describe the quantity and nature of tobacco marketing in stores, fewer studies examine the industry's attempts to reach youth at the point of sale. This study examines whether cigarette marketing is more prevalent in stores where adolescents shop frequently. Trained coders counted cigarette ads, products, and other marketing materials in a census of stores that sell tobacco in Tracy, California (n = 50). A combination of data from focus groups and in-class surveys of middle school students (n = 2125) determined which of the stores adolescents visited most frequently. Amount of marketing materials and shelf space measured separately for the three cigarette brands most popular with adolescent smokers and for other brands combined. Compared to other stores in the same community, stores where adolescents shopped frequently contained almost three times more marketing materials for Marlboro, Camel, and Newport, and significantly more shelf space devoted to these brands. Regardless of whether tobacco companies intentionally target youth at the point of sale, these findings underscore the importance of strategies to reduce the quantity and impact of cigarette marketing materials in this venue.

Consumer nutrition environments of hospitals: an exploratory analysis using the Hospital Nutrition Environment Scan for Cafeterias, Vending Machines, and Gift Shops, 2012.

PubMed

Winston, Courtney P; Sallis, James F; Swartz, Michael D; Hoelscher, Deanna M; Peskin, Melissa F

2013-07-03

Hospitals are the primary worksite of over 5 million adults in the United States, and millions of meals are procured and consumed in this setting. Because many worksite nutrition initiatives use an ecological framework to improve the dietary habits of employees, the nutrition values of foods served in hospitals is receiving attention. This study used the Hospital Nutrition Environment Scan for Cafeterias, Vending Machines, and Gift Shops to quantitatively describe the consumer nutrition environments of 39 hospitals in Southern California. Data were collected by visiting each facility once from February 2012 through May 2012. On average, hospitals achieved only 29%, 33%, and less than 1% of the total possible points for their cafeteria, vending machines, and gift shops sections, respectively; overall, hospitals scored 25% of the total possible points. Large facility size and contracted food service operations were associated with some healthy practices in hospital cafeterias, but we found no association between these variables and the sectional or overall nutrition composite scores. The average consumer nutrition environment of hospitals in this sample was minimally conducive to healthful eating. Nutrition-related interventions are warranted in hospital settings.

ELECTRICAL LINES ARRIVE FROM CENTRAL FACILITIES AREA, SOUTH OF MTR. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ELECTRICAL LINES ARRIVE FROM CENTRAL FACILITIES AREA, SOUTH OF MTR. EXCAVATION RUBBLE IN FOREGROUND. CONTRACTOR CRAFT SHOPS, CRANES, AND OTHER MATERIALS ON SITE. CAMERA FACES EAST, WITH LITTLE BUTTE AND MIDDLE BUTTE IN DISTANCE. INL NEGATIVE NO. 335. Unknown Photographer, 7/1/1950 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

110. ARAI support facilities. Index of drawings related to initial ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

110. ARA-I support facilities. Index of drawings related to initial construction of hot cell building ARA-626, shop and maintenance building ARA-627, and other buildings at ARA-I. Date: Circa January 1959. Norman Engineering Company. Ineel index code no. 068-9999-80-613-102703. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

How Mockups, a Key Engineering Tool, Help to Promote Science, Technology, Engineering, and Mathematics Education

NASA Technical Reports Server (NTRS)

McDonald, Harry E.

2010-01-01

The United States ranking among the world in science, technology, engineering, and mathematics (STEM) education is decreasing. To counteract this problem NASA has made it part of its mission to promote STEM education among the nation s youth. Mockups can serve as a great tool when promoting STEM education in America. The Orion Cockpit Working Group has created a new program called Students Shaping America s Next Space Craft (SSANS) to outfit the Medium Fidelity Orion Mockup. SSANS will challenge the students to come up with unique designs to represent the flight design hardware. There are two main types of project packages created by SSANS, those for high school students and those for university students. The high school projects will challenge wood shop, metal shop and pre-engineering classes. The university projects are created mainly for senior design projects and will require the students to perform finite element analysis. These projects will also challenge the undergraduate students in material selection and safety requirements. The SSANS program will help NASA in its mission to promote STEM education, and will help to shape our nations youth into the next generation of STEM leaders.

Final Environmental Assessment: Base-Wide Building Demolition Arnold Air Force Base, Tennessee

DTIC Science & Technology

2006-02-01

Building • Engine Test Facility ( ETF )-B Exhauster • ETF -A Airside • ETF -A Exhauster • ETF -A Reefer • CE Facility • Rocket Storage • Von Karman Gas...Executive Order ESA Endangered Species Act ETF Engine Test Facility FamCamp Family Camping Area P:\\ARNOLDAFB\\333402DO42COMPLIANCE\\DEMOLITION...Fabrication Shop • Natural Resources Building • Salt Storage Building • Administration Building • Engine Test Facility ( ETF )-B Exhauster • ETF -A

Characteristics and practices of Traditional Chinese Medicine retail shops in London, UK: A cross-sectional study using an observational approach.

PubMed

Teng, Lida; Shaw, Debbie; Barnes, Joanne

2015-09-15

Traditional Chinese Medicine (TCM) is a popular form of ethnomedicine in the UK, and is accessed by Western, Chinese and other ethnic groups. The current regulatory regime does not effectively protect the public against poor-quality and unsafe TCMs. Understanding ethnopharmacological information on how TCM is promoted and practiced may help to inform initiatives aimed at ensuring the safe use of TCMs in the UK, and put laboratory-based ethnopharmacological investigations of TCMs in a broader context. This study aimed to examine the characteristics and practices of TCM retail outlets in London, UK, and to identify factors relevant to the safe use of TCM in the UK. TCM retail outlets ('shops') in London, UK, were identified using a systematic approach. A structured questionnaire including questions on shop business type was used to recruit participant shops. Shops consenting to participate were visited within six weeks of providing consent. A piloted semi-structured questionnaire on shop characteristics was used for data collection following observation. The British National Formulary 53 was used to classify medical conditions/uses for TCMs promoted in the shops. Data were stored and analysed using MS Access 2003, MS Excel 2003 and SPSS 13. In total, 54 TCM shops in London were identified, of which 94% offered TCM consultations with a TCM practitioner. Detailed characteristics were described within 35/50 shops that gave consent to observing their premises. Most shops labelled and displayed over 150 Chinese Materia Medica (CMMs; crude materials, particularly herbs) for dispensing after consultations with a TCM practitioner. Medical conditions/uses and Patent Chinese Medicines (PCMs) were commonly promoted. In total, 794 occurrences of 205 different medical conditions/uses (median=32, QL=19, QU=48) were identified. These conditions/uses most commonly related to the following therapeutic systems: central nervous system (160/794, 20.2%); musculoskeletal and joint disease (133/794, 16.8%); obstetrics, gynaecology, and urinary-tract disorders (122/794, 15.4%); skin (102/794, 12.9%); gastrointestinal system (62/794, 7.8%). Specific conditions/uses that were frequently promoted included eczema (19/23 shops, 82.6%), arthritis (18/23, 78.3%), acne (17/23, 73.9%), obesity/weight loss/slimming (17/23, 73.9%) and psoriasis (17/23, 73.9%). Claimed conditions/uses included some serious medical conditions (e.g. diabetes, cancer and hypertension) and those focusing on vulnerable groups (e.g. children's diseases and pregnancy treatments). TCM shops in London, UK, typically displayed names of a wide range of medical conditions/uses for TCMs using readily understandable medical terms, implying TCM can be used to prevent or treat these conditions. However, many of these advertisements did not comply with UK regulations on medical claims for herbal medicines. Future studies should explore how these advertisements influence consumers' decisions to access TCM in the UK, practices of TCM shop staff towards the supply of TCMs in the UK, and what are the health implications at the individual and population levels. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Glossary: Defense Acquisition Acronyms and Terms. 4th Edition

DTIC Science & Technology

1989-10-01

Appropriations Committee R HARDMAN Manpower Planning for Hardware (Navy/USMC) HASC House Armed Services Committee 11 HBC House Budget Committee R HCA Head of...Logistics Review Group (Navy) LRIP Low Rate Initial Production LRP Low Rate Production LRRDAP Long Range Research, Development and Acquisition Plan...Software User’s Manual R SUPSHIPS Superintendent of Shipbuilding S/V Survivability/Vulnerability SVR Shop Visit Rate R SW or S/W Software SX Systems

Next Generation House Call.

PubMed

Adams, Jamie L; Tarolli, Christopher G; Dorsey, E Ray

2017-01-01

Just as online shopping is supplanting visits to the mall, and distance learning is part of the new wave in higher education, so is health care coming to a computer or mobile device near you. In the next few years, telehealth will increasingly become part of psychiatric and neurological care. Still to overcome is an unwieldy health care system that will need to adapt to practices that have the potential to lower costs and improve care .

XLR-11 - X-1 rocket engine display

NASA Technical Reports Server (NTRS)

1996-01-01

What started as a hobby for four rocket fanatics went on to break the sound barrier: Lovell Lawrence, Hugh Franklin Pierce, John Shesta, and Jimmy Wyld the four founders of Reaction Motors, Inc. that built the XLR-11 Rocket Engine. The XLR-11 engine is shown on display in the NASA Exchange Gift Shop, NASA Hugh L. Dryden Flight Research Center at Edwards, California. This engine, familiarly known as Black Betsy, a 4-chamber rocket that ignited diluted ethyl alcohol and liquid oxygen into 6000 pounds or more of thrust powered the X-1 series airplanes.

29. OVERVIEW OF CENTRAL PART, TO WEST, SHOWING CLERESTORY WINDOWS. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

29. OVERVIEW OF CENTRAL PART, TO WEST, SHOWING CLERESTORY WINDOWS. THE WALL AT REAR IS RECENT, SEPARATING TWO TENANTS' SPACES. - United Engineering Company Shipyard, Inspection & Repair Shops, 2900 Main Street, Alameda, Alameda County, CA

A&M. TAN607 floor plans. Shows three floor levels of pool, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607 floor plans. Shows three floor levels of pool, hot shop, and warm shop. Includes view of pool vestibule, personnel labyrinth, location of floor rails, and room numbers of office areas, labs, instrument rooms, and stairways. This drawing was re-drawn to show as-built features in 1993. Ralph M. Parsons 902-3-ANP-607-A 96. Date of original: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-00-693-106748 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

A&M. TAN607 sections. Section A shows variable roof lines, variable ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607 sections. Section A shows variable roof lines, variable thickness of hot shop shield walls, relationship of subterranean pool to grade. Section B shows relative heights of hot shop floor and its control gallery, position of bridge cranes and manipulator rails. Locomotive service pit. Referent drawing is ID-33-E-158 Above. Ralph M. Parsons 902-3-ANP-607-A 105. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-00-693-106757 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

KSC-04pd1058

NASA Image and Video Library

2004-05-07

KENNEDY SPACE CENTER, FLA. -- In the Space Shuttle Main Engine Shop at KSC, Boeing Product Support Director Dan Hausman (left) talks with STS-114 Mission Commander Eileen Collins. Behind them is one of the main engines. Crew members are touring several areas on Center. The STS-114 mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment plus the external stowage platform to the International Space Station.

77 FR 4648 - Airworthiness Directives; Rolls-Royce plc (RR) RB211-535 Series Turbofan Engine

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-31

... inspections (FPI) of the low-pressure (LP) turbine stage 1, 2, and 3 discs to detect cracks in the discs. This... turbine stage 1, 2, and 3 discs, which could result in an uncontained release of LP turbine blades and... require performing an initial FPI on the LP turbine stage 1, 2, and 3 discs at the next engine shop...

Review of Air Force Compressor Blade and Vane Rework and It’s Impact on Performance and Costs

DTIC Science & Technology

1990-05-01

rework effort for reasons other than FOD. The actuarial data for March 1988, indicate that there are 977 J-79-17 engines and 2413 J-79-15 engines...maintenance shops about once every seven years (Engine Depot actuarial data). Consequently, the increased fuel cost to be used for rework cost comparisons...actual count made by personnel at Oklahoma City was only for the month of August. Additional information was based on actuarial data, assuming the data

Performance, Life, and Operability Trade-Offs in VCE Control Logic Design.

DTIC Science & Technology

1981-08-01

primarily USAF Actuarial Reports), including all engine returns to the intermediate or depot shop - scheduled and unscheduled - engine and non-engine...Length (Min) Training * Air to Air (ATA) 30 576 87 e Air to Ground (ATG) 30 363 128 Combat e Air Superiority ( ASM ) 13 75 228 e Intercept 2 31 94... ASME , 16th Joint Propulsion Conference, Paper No. ALAA-80-1115, June 30 - July 2, 1980. 2. Akimov, V.M., Starik, D.E., et al., The Economic Efficiency

A&M. TAN607 sections. Section C cuts hot shop on its ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607 sections. Section C cuts hot shop on its 160-foot east/west line. Shows tapered shield wall on east and west facades of building. Relationship between hot shop and special equipment service room, cable tracks for overhead bridge crane, location of well. Concrete roof beams. Section D shows similar east/west of cold assembly room 115 and its bridge crane rail. Shows heavy shielding around special services cubicle and height of viewing windows on east and west sides. Rear of building is shown in relationship to the ridge east of the building. Referent drawing is ID-33-E-158 above. Ralph M. Parsons 902-3-ANP-607-A 106. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-00-693-106758 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

76 FR 38383 - Albany Engineering Corporation, Town of Stuyvesant, NY; Notice of Site Visit and Technical Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-30

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [ Project No. 2696-033] Albany Engineering Corporation, Town of Stuyvesant, NY; Notice of Site Visit and Technical Meeting On July 12, 2011, Office of Energy Projects staff will participate in a site visit and technical meeting for the Stuyvesant...

Visiting Professorships

NASA Astrophysics Data System (ADS)

Applications are now being accepted for the National Science Foundation (NSF) Visiting Professorships for Women Program. Under this program, women scientists and engineers from industry, government, and academia can be visiting professors at academic institutions in the United States.The program's objectives are to provide opportunities for women to advance their careers in the disciplines of science and engineering that are supported by NSF to provide greater visibility and wider opportunities for women scientists and engineers employed in industry, government, and academic institutions, and to provide encouragement for other women to pursue careers in science and engineering through the awardees' research, lecturing, counseling, and mentoring activities.

Capitol Day

NASA Image and Video Library

2009-02-19

Stennis Space Center Director Gene Goldman visits with Mississippi Gov. Haley Barbour during NASA Day at the Capitol activities on Feb. 19. During the visit, Goldman presented the governor with a model of the J-2X rocket engine currently in development. Stennis engineers did early component testing for the new engine.

75 FR 14128 - Center for Nanoscale Science and Technology Postdoctoral Researcher and Visiting Fellow...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-24

... Measurement Science and Engineering Program; Availability of Funds AGENCY: National Institute of Standards and... Measurement Science and Engineering Program. This program is intended to promote research, training, and... Visiting Fellow Measurement Science and Engineering Program are as follows: 1. To advance, through...

KSC-07pd1271

NASA Image and Video Library

2007-05-24

KENNEDY SPACE CENTER, FLA. -- In Space Shuttle Maine Engine Shop, workers get ready to install an engine controller in one of the three main engines (behind them) of the orbiter Discovery. The controller is an electronics package mounted on each space shuttle main engine. It contains two digital computers and the associated electronics to control all main engine components and operations. The controller is attached to the main combustion chamber by shock-mounted fittings. Discovery is the designated orbiter for mission STS-120 to the International Space Station. It will carry a payload that includes the Node 2 module, named Harmony. Launch is targeted for no earlier than Oct. 20. Photo credit: NASA/Cory Huston

KSC-07pd1272

NASA Image and Video Library

2007-05-24

KENNEDY SPACE CENTER, FLA. -- In the Space Shuttle Maine Engine Shop, workers are installing an engine controller in one of the three main engines of the orbiter Discovery. The controller is an electronics package mounted on each space shuttle main engine. It contains two digital computers and the associated electronics to control all main engine components and operations. The controller is attached to the main combustion chamber by shock-mounted fittings. Discovery is the designated orbiter for mission STS-120 to the International Space Station. It will carry a payload that includes the Node 2 module, named Harmony. Launch is targeted for no earlier than Oct. 20. Photo credit: NASA/Cory Huston

KSC-07pd1274

NASA Image and Video Library

2007-05-24

KENNEDY SPACE CENTER, FLA. -- In the Space Shuttle Maine Engine Shop, workers check the installation of an engine controller in one of the three main engines of the orbiter Discovery. The controller is an electronics package mounted on each space shuttle main engine. It contains two digital computers and the associated electronics to control all main engine components and operations. The controller is attached to the main combustion chamber by shock-mounted fittings. Discovery is the designated orbiter for mission STS-120 to the International Space Station. It will carry a payload that includes the Node 2 module, named Harmony. Launch is targeted for no earlier than Oct. 20. Photo credit: NASA/Cory Huston

KSC-07pd1273

NASA Image and Video Library

2007-05-24

KENNEDY SPACE CENTER, FLA. -- In the Space Shuttle Maine Engine Shop, workers are installing an engine controller in one of the three main engines of the orbiter Discovery. The controller is an electronics package mounted on each space shuttle main engine. It contains two digital computers and the associated electronics to control all main engine components and operations. The controller is attached to the main combustion chamber by shock-mounted fittings. Discovery is the designated orbiter for mission STS-120 to the International Space Station. It will carry a payload that includes the Node 2 module, named Harmony. Launch is targeted for no earlier than Oct. 20. Photo credit: NASA/Cory Huston

KSC-07pd1270

NASA Image and Video Library

2007-05-24

KENNEDY SPACE CENTER, FLA. -- In the Space Shuttle Maine Engine Shop, workers get ready to install an engine controller in one of the three main engines of the orbiter Discovery. The controller is an electronics package mounted on each space shuttle main engine. It contains two digital computers and the associated electronics to control all main engine components and operations. The controller is attached to the main combustion chamber by shock-mounted fittings. Discovery is the designated orbiter for mission STS-120 to the International Space Station. It will carry a payload that includes the Node 2 module, named Harmony. Launch is targeted for no earlier than Oct. 20. Photo credit: NASA/Cory Huston

2. PERSPECTIVE VIEW OF WEST AND SOUTH SIDES, LOOKING EAST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. PERSPECTIVE VIEW OF WEST AND SOUTH SIDES, LOOKING EAST DOWN 12TH STREET (820 Twelfth Street in background across Ninth Avenue) - Twelfth Street Car Shops, Fire Engine House No. 7, 1128 Ninth Avenue, Altoona, Blair County, PA

Problem Solving and Training Guide for Shipyard Industrial Engineers

DTIC Science & Technology

1986-06-01

Design Integration Tools Building 192 Room 128 9500 MacArthur Blvd Bethesda, MD 20817-5700 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING...called upon to increase the knowledge about industrial engineering of some shipyard group. The Curriculum is seen especially as a tool to identify new...materials on all common machine shop tools . Data permits calculation of machining time. 085 Ostwald, Phillip F. AMERICAN MACHINIST MANUFACTURING COST

Doctor shopping for medications used in the treatment of attention deficit hyperactivity disorder: shoppers often pay in cash and cross state lines.

PubMed

Cepeda, M Soledad; Fife, Daniel; Berwaerts, Joris; Friedman, Andrew; Yuan, Yingli; Mastrogiovanni, Greg

2015-05-01

Doctor shopping, defined by filling overlapping prescriptions from more than one prescriber at more than two pharmacies, is a way to obtain scheduled medications for diversion or abuse. Little is known about how far attention deficit hyperactivity disorder (ADHD) medication shoppers travel, how often they cross state lines to fill their ADHD prescriptions and how often they pay for their medication in cash, i.e. entirely out of pocket. We sought to describe the pattern of doctor shopping for ADHD medications: how far shoppers travel, how often they cross state lines to fill their prescriptions, and how often they pay in cash. Retrospective cohort study using LRx, a large US retail prescription database. We included subjects with any ADHD medication dispensed between 2011 and 2012. Subjects were followed for 18 months. Of a total of 4 402 464 subjects exposed to ADHD medications, 0.4% developed shopping behavior. Women were more likely to become shoppers. Shoppers travelled a median of 91.9 miles and non-shoppers 0.2 miles to fill their ADHD prescriptions. Almost 28% of the shoppers filled prescriptions in >1 state compared with 4.3% of non-shoppers. Of the shoppers, 27.3% paid at least one prescription in cash compared to 14.4% of the non-shoppers. Shoppers travelled larger distances, visited more states and paid in cash for ADHD medications more often than non-shoppers. Data sharing among prescriptions monitoring programs can improve their effectiveness and drug utilization studies should take account of cash purchases.

Food shopping transition: socio-economic characteristics and motivations associated with use of supermarkets in a North African urban environment.

PubMed

Tessier, Sophie; Traissac, Pierre; Bricas, Nicolas; Maire, Bernard; Eymard-Duvernay, Sabrina; El Ati, Jalila; Delpeuch, Francis

2010-09-01

In the context of the nutrition transition and associated changes in the food retail sector, to examine the socio-economic characteristics and motivations of shoppers using different retail formats (large supermarkets (LSM), medium-sized supermarkets (MSM) or traditional outlets) in Tunisia. Cross-sectional survey (2006). Socio-economic status, type of food retailer and motivations data were collected during house visits. Associations between socio-economic factors and type of retailer were assessed by multinomial regression; correspondence analysis was used to analyse declared motivations. Peri-urban area around Tunis, Tunisia, North Africa. Clustered random sample of 724 households. One-third of the households used LSM, two-thirds used either type of supermarket, but less than 5 % used supermarkets only. Those who shopped for food at supermarkets were of higher socio-economic status; those who used LSM were much wealthier, more often had a steady income or owned a credit card, while MSM users were more urban and had a higher level of education. Most households still frequently used traditional outlets, mostly their neighbourhood grocer. Reasons given for shopping at the different retailers were most markedly leisure for LSM, while for the neighbourhood grocer the reasons were fidelity, proximity and availability of credit (the latter even more for lower-income customers). The results pertain to the transition in food shopping practices in a south Mediterranean country; they should be considered in the context of growing inequalities in health linked to the nutritional transition, as they differentiate use and motivations for the choice of supermarkets v. traditional food retailers according to socio-economic status.

46 CFR 110.30-1 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING GENERAL PROVISIONS Testing and Inspection... vessels in other parts of this chapter. (b) In the inspection of electric equipment and installations, the...) This subpart must not be construed to imply that shop tests or factory inspections of electric...

46 CFR 110.30-1 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING GENERAL PROVISIONS Testing and Inspection... vessels in other parts of this chapter. (b) In the inspection of electric equipment and installations, the...) This subpart must not be construed to imply that shop tests or factory inspections of electric...

46 CFR 110.30-1 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING GENERAL PROVISIONS Testing and Inspection... vessels in other parts of this chapter. (b) In the inspection of electric equipment and installations, the...) This subpart must not be construed to imply that shop tests or factory inspections of electric...

1. GENERAL VIEW OF RAILROAD YARD LOOKING NORTH. Office and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. GENERAL VIEW OF RAILROAD YARD LOOKING NORTH. Office and Car and Wheel Shops to left, Engine House No. 1 to right. Ebensburg Processing Plant and Powerhouse (Colver Mine) in far left background. - Cambria & Indiana Railroad, Colver, Cambria County, PA

The Invention Studio: A University Maker Space and Culture

ERIC Educational Resources Information Center

Forest, Craig R.; Moore, Roxanne A.; Jariwala, Amit S.; Fasse, Barbara Burks; Linsey, Julie; Newstetter, Wendy; Ngo, Peter; Quintero, Christopher

2014-01-01

Creativity, invention, and innovation are values championed as central pillars of engineering education. However, university environments that foster open-ended design-build projects are uncommon. Fabrication and prototyping spaces at universities are typically "machine shops" where students relinquish actual fabrication activities to…

The Rigors of Aligning Performance

DTIC Science & Technology

2015-06-01

organization merged 6 its field activities into regional facilities engineering commands (FECs). Today, FECs provide one-stop shopping for NAVFAC clients...many are old and antiquated , sometimes the systems mesh together other times they do not. Training is lacking on the various systems.  Communication

The MSFC Systems Engineering Guide: An Overview and Plan

NASA Technical Reports Server (NTRS)

Shelby, Jerry; Thomas, L. Dale

2007-01-01

This paper describes the guiding vision, progress to date and the plan forward for development of the Marshall Space Flight Center (MSFC) Systems Engineering Guide (SEG), a virtual systems engineering handbook and archive that describes the system engineering processes used by MSFC in the development of ongoing complex space systems such as the Ares launch vehicle and forthcoming ones as well. It is the intent of this website to be a "One Stop Shop' for MSFC systems engineers that will provide tutorial information, an overview of processes and procedures and links to assist system engineering with guidance and references, and provide an archive of relevant systems engineering artifacts produced by the many NASA projects developed and managed by MSFC over the years.

KSC-02pd1100

NASA Image and Video Library

2002-06-28

KENNEDY SPACE CENTER, FLA. -- Doug Buford (top), with the Aft Engine shop, along with another worker, removes a heat shield on one of Columbia's engines. After small cracks were discovered on the LH2 Main Propulsion System (MPS) flow liners in two other orbiters, program managers decided to move forward with inspections on Columbia before clearing it for flight on STS-107. After removal of the heat shields, the three main engines will be removed. Inspections of the flow liners will follow. The July 19 launch of Columbia on STS-107 has been delayed a few weeks

KSC-02pd1101

NASA Image and Video Library

2002-06-28

KENNEDY SPACE CENTER, FLA. -- Doug Buford, with the Aft Engine shop, removes a heat shield on one of Columbia's engines. After small cracks were discovered on the LH2 Main Propulsion System (MPS) flow liners in two other orbiters, program managers decided to move forward with inspections on Columbia before clearing it for flight on STS-107. After removal of the heat shields, the three main engines will be removed. Inspections of the flow liners will follow. The July 19 launch of Columbia on STS-107 has been delayed a few weeks

Environmental Conditions around Itineraries to Destinations as Correlates of Walking for Transportation among Adults: The RECORD Cohort Study

PubMed Central

Karusisi, Noëlla; Thomas, Frédérique; Méline, Julie; Brondeel, Ruben; Chaix, Basile

2014-01-01

Introduction Assessing the contextual factors that influence walking for transportation is important to develop more walkable environments and promote physical activity. To advance previous research focused on residential environments and overall walking for transportation, the present study investigates objective environmental factors assessed around the residence, the workplace, the home – work itinerary, and the home – supermarket itinerary, and considered overall walking for transportation but also walking to work and to shops. Methods Data from the RECORD Study involving 7290 participants recruited in 2007–2008, aged 30–79 years, and residing in the Paris metropolitan area were analyzed. Multilevel ordinal regression analyses were conducted to investigate environmental characteristics associated with self-reported overall walking for transportation, walking to work, and walking to shops. Results High individual education was associated with overall walking for transportation, with walking to work, and walking to shops. Among workers, a high residential neighborhood education was associated with increased overall walking for transportation, while a high workplace neighborhood education was related to an increased time spent walking to work. The residential density of destinations was positively associated with overall walking for transportation, with walking to work, and with walking to shops, while the workplace density of destinations was positively associated with overall walking for transportation among workers. Environmental factors assessed around the itineraries were not associated with walking to work or to the shops. Conclusion This research improves our understanding of the role of the environments on walking for transportation by accounting for some of the environments visited beyond the residential neighborhood. It shows that workers' walking habits are more influenced by the density of destinations around the workplace than around the residence. These results provide insight for the development of policies and programs to encourage population level active commuting. PMID:24828890

A Case Study of the United States Navy’s Enterprise Resource Planning System

DTIC Science & Technology

2006-06-01

incarnations, MRP-II added the capabilities of shop-floor management and distribution management activities. Later versions included the ability to manage ... finances , human resources, engineering, and project management. Enterprise Resource Planning systems were then developed as an integrated system

Job Hunting in Tougher Times.

ERIC Educational Resources Information Center

Ross, Steven S.

1985-01-01

Several resources to consider are offered to ease the squeeze created by the computer market downturn. Areas addressed include: job-shop option; other-industries option; overseas option; graduate school option; entrepreneurial option; military option; job fairs; and weighing locations. Notes that colleges are looking for engineering teachers,…

Motivating Students with Robotics

ERIC Educational Resources Information Center

Brand, Brenda; Collver, Michael; Kasarda, Mary

2008-01-01

In recent years, the need to advance the number of individuals pursuing science, technology, engineering, and mathematics fields has gained much attention. The Montgomery County/Virginia Tech Robotics Collaborative (MCVTRC), a yearlong high school robotics program housed in an educational shop facility in Montgomery County, Virginia, seeks to…

Dr. Igor Sikorsky Visits the Lewis Flight Propulsion Laboratory

NASA Image and Video Library

1951-06-21

Dr. Igor Sikorsky, fourth from the left, visits the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory in Cleveland, Ohio. The legendary Russian-born aviation pioneer visited NACA Lewis several times during the 1940s and 1950s. In 1946 Sikorsky arrived at Lewis for the 1946 National Air Races, which included demonstrations by five of his helicopters. NACA flight mechanic Joseph Sikosky personally escorted Sikorsky during the visit. Sikorsky frequently addressed local professional organizations, such as the American Society of Mechanical Engineers, during his visits. Sikorsky built and flew the first multi-engine aircraft as a youth in Russia. In his mid-20s Sikorsky designed and oversaw the manufacturing of 75 four-engine bombers. During the Bolshevik Revolution he fled to New York City where he worked jobs outside of aviation. In 1923 Sikorsky obtained funding to build a twin-engine water aircraft. This aircraft was the first US twin-engine flying machine and a world-wide success. In 1939 Sikorsky designed the first successful US helicopter. He then put all of his efforts into helicopters, and built some of the most successful helicopters in use today. Sikorsky passed away in 1972. From left to right: unknown; John Collins, Chief of the Engine Performance and Materials Division; Abe Silverstein, Chief of Research; Sikorsky; lab Director Ray Sharp; and Executive Officer Robert Sessions.

KSC-2011-6523

NASA Image and Video Library

2011-08-19

CAPE CANAVERAL, Fla. -- In Orbiter Processing Facility-2 at NASA’s Kennedy Space Center in Florida, technicians monitor the progress as they use a Hyster forklift to position an engine removal device on Engine #3 on space shuttle Atlantis. Inside the aft section, a technician disconnects hydraulic, fluid and electrical lines. The forklift will be used to remove the engine and transport it to the Engine Shop for possible future use. Each of the three space shuttle main engines is 14 feet long and weighs 7,800 pounds. Removal of the space shuttle main engines is part of the Transition and Retirement work that is being performed in order to prepare Atlantis for eventual display at the Kennedy Space Center Visitor Complex in Florida. Photo credit: Frankie Martin

From 'solution shop' model to 'focused factory' in hospital surgery: increasing care value and predictability.

PubMed

Cook, David; Thompson, Jeffrey E; Habermann, Elizabeth B; Visscher, Sue L; Dearani, Joseph A; Roger, Veronique L; Borah, Bijan J

2014-05-01

The full-service US hospital has been described organizationally as a "solution shop," in which medical problems are assumed to be unstructured and to require expert physicians to determine each course of care. If universally applied, this model contributes to unwarranted variation in care, which leads to lower quality and higher costs. We purposely disrupted the adult cardiac surgical practice that we led at Mayo Clinic, in Rochester, Minnesota, by creating a "focused factory" model (characterized by a uniform approach to delivering a limited set of high-quality products) within the practice's solution shop. Key elements of implementing the new model were mapping the care process, segmenting the patient population, using information technology to communicate clearly defined expectations, and empowering nonphysician providers at the bedside. Using a set of criteria, we determined that the focused-factory model was appropriate for 67 percent of cardiac surgical patients. We found that implementation of the model reduced resource use, length-of-stay, and cost. Variation was markedly reduced, and outcomes were improved. Assigning patients to different care models increases care value and the predictability of care process, outcomes, and costs while preserving (in a lesser clinical footprint) the strengths of the solution shop. We conclude that creating a focused-factory model within a solution shop, by applying industrial engineering principles and health information technology tools and changing the model of work, is very effective in both improving quality and reducing costs.

4. Credit JPL. Original 4" x 5" black and white ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. Credit JPL. Original 4" x 5" black and white negative housed in the JPL Archives, Pasadena, California. This interior view displays the machine shop in the Administration/Shops Building (the compass angle of the view is undetermined). Looking clockwise from the lower left, the machine tools in view are a power hacksaw, a heat-treatment oven (with white gloves on top), a large hydraulic press with a tool grinder at its immediate right; along the wall in the back of the view are various unidentified machine tool attachments and a vertical milling machine. In the background, a machinist is operating a radial drilling machine, to the right of which is a small drill press. To the lower right, another machinist is operating a Pratt & Whitney engine lathe; behind the operator stand a workbench and vertical bandsaw (JPL negative no. 384-10939, 29 July 1975). - Jet Propulsion Laboratory Edwards Facility, Administration & Shops Building, Edwards Air Force Base, Boron, Kern County, CA

Automobile Course. Progress Record and Theory Outline.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford. Div. of Vocational-Technical Schools.

This combination progress record and course outline is designed for use by individuals teaching a course in automobile repair. Included among the topics addressed in the course are the following: shop safety, engines, fuel and exhaust systems, electrical systems, crankcase lubrication systems, cooling systems, power transmission systems, steering…

Materials and Manufacturing, Drafting 3: 9257.03.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

Designed for students interested in engineering fields pertaining to mechanical and electronic drafting, the course covers several types of drawings in the mechanical and electronic drafting field and many types of machine shop operations. The student will become familiar with stress, loading, safety factors, and manufacturing processes. The…

28. HOISTING CHAIN, ELECTRIC GENERATOR (FORMERLY USED TO DRIVE BELTS), ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

28. HOISTING CHAIN, ELECTRIC GENERATOR (FORMERLY USED TO DRIVE BELTS), ACETYLENE TANK, ENGINE LATHE, WELDING AREA, SCREW PRESS, AND AIR COMPRESSOR (L TO R)-LOOKING NORTHEAST. - W. A. Young & Sons Foundry & Machine Shop, On Water Street along Monongahela River, Rices Landing, Greene County, PA

Heavy Equipment Mechanic. Instructor Edition.

ERIC Educational Resources Information Center

Hendrix, Laborn J.; And Others

This manual is intended to assist heavy equipment instructors in teaching the latest concepts and functions of heavy equipment. It includes 7 sections and 27 instructional units. Sections (and units) are: orientation (shop safety and first aid, hand tools and miscellaneous tools, measuring, basic rigging and hoisting), engines (basic engine…

On the Ignition and Combustion Variances of Jet Propellant-8 and Diesel Fuel in Military Diesel Engines

DTIC Science & Technology

2008-09-22

NA Displacement (cc) 1357 6468 Operating speeds (rpm) 800 – 3000 1500 – 3400 IMEP range (bar) 5 – 27 2 – 10 Boost system Shop air Turbocharger ...Council Diesel Fuel Workshop. Pickett, L.M. and Hoogterp, L., “ Fundamental Spray and Combustion Measurements of JP-8 at Diesel Conditions”, SAE...N., 1981, "Transient Performance Simulation and Analysis of Turbocharged Diesel Engines", SAE Paper 810338.

KSC-04pd1057

NASA Image and Video Library

2004-05-07

KENNEDY SPACE CENTER, FLA. -- In the Space Shuttle Main Engine Shop at KSC, Boeing Tech Operations’ Team Manager Matthew McClelland (left) talks with STS-114 Pilot James Kelly. At right are Mission Specialists Wendy Lawrence and Charles Camarda. One of the main engines is in the background. Crew members are touring several areas on Center. The STS-114 mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment plus the external stowage platform to the International Space Station.

KSC-04PD-1057

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- In the Space Shuttle Main Engine Shop at KSC, Boeing Tech Operations Team Manager Matthew McClelland (left) talks with STS-114 Pilot James Kelly. At right are Mission Specialists Wendy Lawrence and Charles Camarda. One of the main engines is in the background. Crew members are touring several areas on Center. The STS-114 mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment plus the external stowage platform to the International Space Station.

ADM. Aerial view of administration area. Camera facing westerly. From ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ADM. Aerial view of administration area. Camera facing westerly. From left to right in foregound: Substation (TAN-605), Warehouse (TAN-628), Gate House (TAN-601), Administration Building (TAN-602). Left to right middle ground: Service Building (TAN-603), Warehouse (later known as Maintenance Shop or Craft Shop, TAN-604), Water Well Pump Houses, Fuel Tanks and Fuel Pump Houses, and Water Storage Tanks. Change House (TAN-606) on near side of berm. Large building beyond berm is A&M. Building, TAN-607. Railroad tracks beyond lead from (unseen) turntable to the IET. Date: June 6, 1955. INEEL negative no. 13201 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

Effects of retrofit emission controls and work practices on perchloroethylene exposures in small dry-cleaning shops.

PubMed

Ewers, Lynda M; Ruder, Avima M; Petersen, Martin R; Earnest, G Scott; Goldenhar, Linda M

2002-02-01

The effectiveness of commercially available interventions for reducing workers' perchloroethylene exposures in three small dry-cleaning shops was evaluated. Depending upon machine configuration, the intervention consisted of the addition of either a refrigerated condenser or a closed-loop carbon adsorber to the existing dry-cleaning machine. These relatively inexpensive (less than $5000) engineering controls were designed to reduce perchloroethylene emissions when dry-cleaning machine doors were opened for loading or unloading. Effectiveness of the interventions was judged by comparing pre- and postintervention perchloroethylene exposures using three types of measurements in each shop: (1) full-shift, personal breathing zone, air monitoring, (2) next-morning, end-exhaled worker breath concentrations of perchloroethylene, and (3) differences in the end-exhaled breath perchloroethylene concentrations before and after opening the dry-cleaning machine door. In general, measurements supported the hypothesis that machine operators' exposures to perchloroethylene can be reduced. However, work practices, especially maintenance practices, influenced exposures more than was originally anticipated. Only owners of dry-cleaning machines in good repair, with few leaks, should consider retrofitting them, and only after consultation with their machine's manufacturer. If machines are in poor condition, a new machine or alternative technology should be considered. Shop owners and employees should never circumvent safety features on dry-cleaning machines.

Rotating Liner Engine: Improving Efficiency of Heavy Duty Diesels by Significant Friction Reduction, and Extending the Life of Heavy Duty Engines.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dardalis, Dimitrios

2013-12-31

This report describes the work on converting a 4 cylinder Cummins ISB engine into a single cylinder Rotating Liner Engine functioning prototype that can be used to measure the friction benefits of rotating the cylinder liner in a high pressure compression ignition engine. A similar baseline engine was also prepared, and preliminary testing was done. Even though the fabrication of the single cylinder prototype was behind schedule due to machine shop delays, the fundamental soundness of the design elements are proven, and the engine has successfully functioned. However, the testing approach of the two engines, as envisioned by the originalmore » proposal, proved impossible due to torsional vibration resonance caused by the single active piston. A new approach for proper testing has been proposed,« less

10. Credit USAF, 1945. Original housed in the Muroc Flight ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. Credit USAF, 1945. Original housed in the Muroc Flight Test Base, Unit History, 1 September 1942 30 June 1945. Alfred F. Simpson Historical Research Agency. United States Air Force. Maxwell AFB, Alabama. View of jet engine rotor balancing machine with engine rotor in place for balancing operations. Original caption reads "Balancing bucket wheel of jet engine, Muroc Flight Test Base, Oct. 1945"; personnel not identified. Location where photograph was taken not determined, but presumed to be in shops of Building 4505. - Edwards Air Force Base, North Base, Hangar, End of North Base Road, Boron, Kern County, CA

Manual Training Schools in America.

ERIC Educational Resources Information Center

Schenck, John P.

John Runkle, president of the Massachusetts Institute of Technology (MIT), viewed the Moscow Imperial Technical School exhibit at the Philadelphia Centennial Exposition of 1876 and saw the Russian method of manual training as the answer to the dilemma of combining theory and practice in engineering instruction. On August 17, 1876, shops in which…

14. VIEW OF AIR COMPRESSOR. 1500 kw Westinghouse AC generator ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. VIEW OF AIR COMPRESSOR. 1500 kw Westinghouse AC generator steam-turbine unit; beyond is air compressor of Chicago Pneumatic Tool Company, 1920, engineered by Earl E. Know Company, Erie, Pennsylvania. - Juniata Shops, Power Plant & Boiler House, East of Fourth Avenue at Second Street, Altoona, Blair County, PA

DETAIL VIEW OF INTERIOR SHOWING TWO 3,000POUND STEAM HAMMERS, CA. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL VIEW OF INTERIOR SHOWING TWO 3,000-POUND STEAM HAMMERS, CA. 1905, CONVERTED TO COMPRESSED AIR 1985 (MANUFACTURED BY CHAMBERSBURG ENGINEERING COMPANY, CHAMBERSBURG, PENNSYLVANIA), LOCATED ON EITHER SIDE OF CAST-IRON CENTRAL SUPPORT COLUMN. - Cambria Iron Company, Blacksmith Shop, Lower Works, Johnstown, Cambria County, PA

Applying the Theory of Constraints to a Base Civil Engineering Operations Branch

DTIC Science & Technology

1991-09-01

Figure Page 1. Typical Work Order Processing . .......... 7 2. Typical Job Order Processing . .......... 8 3. Typical Simplified In-Service Work Plan for...Customers’ Customer Request Service Planning Unit Production] Control Center Material Control Scheduling CE Shops Figure 1.. Typical Work Order Processing 7

EAST ELEVATION OF MAIN PROCESSING BUILDING (CPP601) LOOKING NORTHWEST. MAINTENANCE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

EAST ELEVATION OF MAIN PROCESSING BUILDING (CPP-601) LOOKING NORTHWEST. MAINTENANCE SHOP AND OFFICE BUILDING (CPP-630) ON RIGHT IN PHOTO. INL PHOTO NUMBER HD-22-3-2. Mike Crane, Photographer, 11/1998 - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

18. Photocopy of copy of drawing of boiler plant and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. Photocopy of copy of drawing of boiler plant and shops building, dated June 15, 1944. Copy of drawing stored at 436 Civil Engineer Squadron, Design Management Element Cece, 600 8th Street, Dover AFB, DE - Dover Air Force Base, Hangar No. 1301, Dover, Kent County, DE

Jen Gustetic visits Swamp Works

NASA Image and Video Library

2016-10-28

Jenn Gustetic, NASA's Small Business Innovation Research Program executive, talks with Rob Mueller, senior technologist and co-founder of Kennedy Space Center's Swamp Works. Gustetic met team members and viewed many of the pioneering technologies and innovations in development at Kennedy. Swamp Works is a hands-on, lean development environment for innovation following the philosophies pioneered in Kelly Johnson's Skunk Works and Werner von Braun's development shops. The Swamp Works establishes rapid, innovative and cost-effective exploration mission solutions through a highly collaborative, "no walls" approach, leveraging partnerships across NASA, industry and academia.

Expedition 23, 24, 25 HQ Visit

NASA Image and Video Library

2011-03-16

Astronauts Tracy Caldwell Dyson, flight engineer on Expeditions 23 and 24, left, and Doug Wheelock, Expedition 24 flight engineer and commander of Expedition 25, discuss their mission to the International Space Station during a visit to NASA Headquarters in Washington, Wednesday, March 16, 2011. (NASA/Paul E. Alers)

Implementation of an Open-Loop Rule-Based Control Strategy for a Hybrid-Electric Propulsion System On a Small RPA

DTIC Science & Technology

2011-03-01

input spindle from the engine to over tighten and apply an even greater amount of resistance to the engine shaft . Not only was this dangerous to...Mengistu, Todd Rotramel, and Matt Rippl, all of whom worked together with me to design and build the test rig for our dynamometer setup. Countless...hours were spent together planning and executing the design and building the stand itself. The AFIT machine shop crew and ENY lab techs also

Patterns of Nonemergent Visits to Different Healthcare Facilities on the Same Day: A Nationwide Analysis in Taiwan

PubMed Central

Wu, Meng-Hsuan; Wu, Meng-Ju; Chou, Li-Fang

2014-01-01

Doctor shopping is a common phenomenon in many countries. However, patterns of switching healthcare facilities on the same day were little known. The data were obtained from the longitudinal cohort datasets (LHID2010) of Taiwan's National Health Insurance Research Database in 2010. Of 1,000,000 persons of the cohort with 13,276,928 nonemergent visits, 185,347 patients had visited different healthcare facilities within one day, with a total of 672,478 visits and 337,260 switches between facilities in 329,073 patient-days. While 63.0% (n = 212,590) of all switches occurred between facilities of the same accreditation level, 14.1% (n = 47,664) moved from lower to higher level, and 22.8% (n = 77,006) moved in the opposite direction. In 33,689 switches, patients moved to the same specialty of another facility. In 48,324 switches, patients moved to another facility with the same diagnosis, and the most frequent diagnoses were diseases of the digestive system (11,148) and diseases of the respiratory system (10,393). In a densely populated country without strict referral regulation, a high percentage of Taiwanese people had the experience of visiting different healthcare facilities on the same day. The system of family physicians as personal doctors and gatekeepers to healthcare might ameliorate the harmful impact. PMID:24892063

Patterns of nonemergent visits to different healthcare facilities on the same day: a nationwide analysis in Taiwan.

PubMed

Wu, Meng-Hsuan; Wu, Meng-Ju; Chou, Li-Fang; Chen, Tzeng-Ji

2014-01-01

Doctor shopping is a common phenomenon in many countries. However, patterns of switching healthcare facilities on the same day were little known. The data were obtained from the longitudinal cohort datasets (LHID2010) of Taiwan's National Health Insurance Research Database in 2010. Of 1,000,000 persons of the cohort with 13,276,928 nonemergent visits, 185,347 patients had visited different healthcare facilities within one day, with a total of 672,478 visits and 337,260 switches between facilities in 329,073 patient-days. While 63.0% (n = 212,590) of all switches occurred between facilities of the same accreditation level, 14.1% (n = 47,664) moved from lower to higher level, and 22.8% (n = 77,006) moved in the opposite direction. In 33,689 switches, patients moved to the same specialty of another facility. In 48,324 switches, patients moved to another facility with the same diagnosis, and the most frequent diagnoses were diseases of the digestive system (11,148) and diseases of the respiratory system (10,393). In a densely populated country without strict referral regulation, a high percentage of Taiwanese people had the experience of visiting different healthcare facilities on the same day. The system of family physicians as personal doctors and gatekeepers to healthcare might ameliorate the harmful impact.

76 FR 38155 - California State Nonroad Engine Pollution Control Standards; Ocean-Going Vessels At-Berth in...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-29

... composed solely of container or refrigerated cargo vessels making fewer than twenty-five (25) visits to the.... \\7\\ ``Fleet'' means ``all container, passenger, and refrigerated cargo vessels, visiting a specific... of nitrogen and particulate matter from auxiliary diesel engines on container vessels, passenger...

Research posts for women

NASA Astrophysics Data System (ADS)

The National Science Foundation (NSF) is accepting proposals for its Visiting Professorships for Women (VPW) program. Under this program, female scientists and engineers who are experienced in independent research can undertake advanced research as visiting professors at universities or research institutions that have the necessary facilities. In addition to research, each visiting professor takes on lecturing, counseling, and “other interactive activities” intended to increase the visibility of female scientists at the host institution and to encourage other women to pursue careers in science and engineering, according to NSF.

A&M. TAN607. Section views of hot shop. Section E shows ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607. Section views of hot shop. Section E shows equipment areas along rear wall. Section F shows storage pool cut along east/west line. Roof trusses, shelves along sides of pool, drain, roof trusses, shelves along sides of pool, drain, and sump. Section G cuts along north/south to show centerline of turntables, manipulator arms, O-man bridge, crane bridge. Referent drawing is ID-33-E-158 above. Ralph M. Parsons 902-3-ANP-607-A 107. Date: December 1952, but as-built in 1982. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-00-693-106759 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

46 CFR 56.90-1 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 2 2013-10-01 2013-10-01 false General. 56.90-1 Section 56.90-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Assembly § 56.90-1 General. (a) The assembly of the various piping components, whether done in a shop or as field...

46 CFR 56.90-1 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false General. 56.90-1 Section 56.90-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Assembly § 56.90-1 General. (a) The assembly of the various piping components, whether done in a shop or as field...

46 CFR 56.90-1 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 2 2011-10-01 2011-10-01 false General. 56.90-1 Section 56.90-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Assembly § 56.90-1 General. (a) The assembly of the various piping components, whether done in a shop or as field...

46 CFR 56.90-1 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 2 2014-10-01 2014-10-01 false General. 56.90-1 Section 56.90-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Assembly § 56.90-1 General. (a) The assembly of the various piping components, whether done in a shop or as field...

46 CFR 56.90-1 - General.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 2 2012-10-01 2012-10-01 false General. 56.90-1 Section 56.90-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING PIPING SYSTEMS AND APPURTENANCES Assembly § 56.90-1 General. (a) The assembly of the various piping components, whether done in a shop or as field...

Fiber Glass/Plastics. FOS: Fundamentals of Service.

ERIC Educational Resources Information Center

John Deere Co., Moline, IL.

This manual on methods of repairing damaged components and parts made of fiberglass/plastics is one of a series of texts and visual aids on operation, diagnosis, and repair of engine powered vehicles. Materials provide basic information with illustrations for use by vocational students and teachers as well as shop servicemen and laymen. Focusing…

NASA Education Stakeholder's Summit

NASA Image and Video Library

2010-09-12

William Kelly, PhD, PE, Manager, Public Affairs, American Society for Engineering Education speaks at the NASA Education Stakeholders’ Summit One Stop Shopping Initiative (OSSI), Monday, Sep. 13, 2010, at the Westfields Marriott Conference Center in Chantilly, VA. Seated are NASA Administrator Charles Bolden, left, and NASA Acting Associate Administrator for Education, James Stofan. (Photo Credit: NASA/Carla Cioffi)

77 FR 12444 - Airworthiness Directives; General Electric Company (GE) Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-01

... support the NPRM as written. Request To Correct Part Number Commenters GE and Delta Airlines (Delta... packing configuration either on-wing or in the shop and to determine if further actions are necessary. We.... Request To Modify Compliance Time Commenters GE and Delta requested that we change the compliance time of...

ADM. Change House (TAN606) as completed. Camera facing northerly. Note ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ADM. Change House (TAN-606) as completed. Camera facing northerly. Note proximity to shielding berm. Part of hot shop (A&M Building, TAN-607) at left of view beyond berm. Date: October 29, 1954. INEEL negative no. 12705 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

LOFT. Reactor apparatus leaves A&M building (TAN607). Shielded locomotive has ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

LOFT. Reactor apparatus leaves A&M building (TAN-607). Shielded locomotive has aerojet logo, which replaced old general electric logo, pulls reactor from assembly shop on dolly. Camera facing easterly. Date: 1973. INEEL negative no. 73-3700 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

The Effect of Mystery Shopper Reports on Age Verification for Tobacco Purchases

PubMed Central

KREVOR, BRAD S.; PONICKI, WILLIAM R.; GRUBE, JOEL W.; DeJONG, WILLIAM

2011-01-01

Mystery shops (MS) involving attempted tobacco purchases by young buyers have been employed to monitor retail stores’ performance in refusing underage sales. Anecdotal evidence suggests that MS visits with immediate feedback to store personnel can improve age verification. This study investigated the impact of monthly and twice-monthly MS reports on age verification. Forty-five Walgreens stores were each visited 20 times by mystery shoppers. The stores were randomly assigned to one of three conditions. Control group stores received no feedback, whereas two treatment groups received feedback communications every visit (twice monthly) or every second visit (monthly) after baseline. Logit regression models tested whether each treatment group improved verification rates relative to the control group. Post-baseline verification rates were higher in both treatment groups than in the control group, but only the stores receiving monthly communications had a significantly greater improvement than control group stores. Verification rates increased significantly during the study period for all three groups, with delayed improvement among control group stores. Communication between managers regarding the MS program may account for the delayed age-verification improvements observed in the control group stores. Encouraging inter-store communication might extend the benefits of MS programs beyond those stores that receive this intervention. PMID:21541874

Exposure Evaluation for Benzene, Lead and Noise in Vehicle and Equipment Repair Shops

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sweeney, Lynn C.

An exposure assessment was performed at the equipment and vehicle maintenance repair shops operating at the U. S. Department of Energy Hanford site, in Richland, Washington. The maintenance shops repair and maintain vehicles and equipment used in support of the Hanford cleanup mission. There are three general mechanic shops and one auto body repair shop. The mechanics work on heavy equipment used in construction, cranes, commercial motor vehicles, passenger-type vehicles in addition to air compressors, generators, and farm equipment. Services include part fabrication, installation of equipment, repair and maintenance work in the engine compartment, and tire and brake services. Workmore » performed at the auto body shop includes painting and surface preparation which involves applying body filler and sanding. 8-hour time-weighted-average samples were collected for benzene and noise exposure and task-based samples were collected for lead dust work activities involving painted metal surfaces. Benzene samples were obtained using 3M™ 3520 sampling badges and were analyzed for additional volatile organic compounds. These compounds were selected based on material safety data sheet information for the aerosol products used by the mechanics for each day of sampling. The compounds included acetone, ethyl ether, toluene, xylene, VM&P naphtha, methyl ethyl ketone, and trichloroethylene. Laboratory data for benzene, VM&P naphtha, methyl ethyl ketone and trichloroethylene were all below the reporting detection limit. Airborne concentrations for acetone, ethyl ether, toluene and xylene were all less than 10% of their occupational exposure limit. The task-based samples obtained for lead dusts were submitted for a metal scan analysis to identify other metals that might be present. Laboratory results for lead dusts were all below the reporting detection limit and airborne concentration for the other metals observed in the samples were less than 10% of the occupational exposure limit. Noise dosimetry sampling was performed on a random basis and was representative of the different work activities within the four shops. Twenty three percent of the noise samples exceeded the occupational exposure limit of 85 decibels for an 8-hour time-weightedaverage. Work activities where noise levels were higher included use of impact wrenches and grinding wheels.« less

Work Term Assignment Spring 2017

NASA Technical Reports Server (NTRS)

Sico, Mallory

2017-01-01

My tour in the Engineering Robotics directorate exceeded my expectations. I learned lessons about Creo, manufacturing and assembly, collaboration, and troubleshooting. During my first tour, last spring, I used Creo on a smaller project, but had limited experience with it before starting in the Dynamic Systems Test branch this spring. I gained valuable experience learning assembly design, sheet metal design and designing with intent for manufacturing and assembly. These skills came from working both on the hatch and the floor. I also learned to understand the intent of other designers on models I worked with. While redesigning the floor, I was modifying an existing part and worked to understand what the previous designer had done to make it fit with the new model. Through working with the machine shop and in the mock-up, I learned much more about manufacturing and assembly. I used a Dremel, rivet gun, belt sander, and countersink for the first time. Through taking multiple safety training for different machine shops, I learned new machine shop safety skills specific to each one. This semester also gave me new collaborative opportunities. I collaborated with engineers within my branch as well as with Human Factors and the building 10 machine shop. This experience helped me learn how to design for functionality and assembly, not only for what would be easiest in my designs. In addition to these experiences, I learned many lessons in troubleshooting. I was the first person in my office to use a Windows 10 computer. This caused unexpected issues with NASA services and programs, such as the Digital Data Management Server (DDMS). Because of this, I gained experience finding solutions to lockout and freeze issues as well as Creo specific settings. These will be useful skills to have in the future and will be implemented in future rotations. This co-op tour has motivated me more to finish my degree and pursue my academic goals. I intend to take a machining Career Gateway Elective in the Fall to improve my skills in building as well as designing with manufacturing intent. I am also inspired to take more mechatronics CGE courses before I graduate to learn more about the crossover between mechanical and electrical engineering. This semester, I worked on multiple projects and had the opportunity to learn from engineers of different disciplines. I became proficient in Creo 2.0, a program I had not used significantly before. I finished modifying the hatch for 3D print and made sizeable modifications to the nose floor support design. I also gained hands-on experience that will be useful in my engineering career in the future. I would consider all of these major achievements from this spring semester. Lastly, I learned to ask more questions and to search for the right people to find answers which I know will be a valuable skill in the future. This summer, I will be completing my last rotation in the Flight Operations Directorate at Ellington Air Field. After this last tour, I will be returning to school for the Fall, Spring and Summer. I will graduate in August of 2018. I am looking forward to learning more about the different jobs available to engineers. This division works directly with many different types of aircrafts and I am excited to learn more about this focus of engineering. The Aircraft Operations Division values team work greatly and I intend to improve my interpersonal skills by working with them this summer.

Global flexibility--shop floor flexibility: what's a worker to do?

PubMed

Forrant, R

1999-01-01

For several years new forms of work organization have been introduced by U.S. management to cut labor costs, improve productivity, and increase their shop floor control. Corporations have also invested in computer-controlled machinery in an effort to eliminate large numbers of skilled blue-collar workers and to decrease their reliance on the tacit knowledge of such workers. Once seemingly secure jobs in diverse industries like airplanes, jet engines, machine tools, and computer chips, are no longer so stable. In an effort to expand their global reach and reorganize the workplace, managers are able to capitalize on two conflicted and conflicting attitudes among the workforce: the first, workers most deep-seated fear, the loss of a permanent job; the second, their aspirations to contribute their knowledge and skills in a positive way on the shop floor. In this article the reorganization of work at two western Massachusetts metalworking companies is described. What distinguishes these cases is the central role that the union played in the organized plant and the workers played in both plants to improve production and at least for now preserve jobs.

KSC-2013-3238

NASA Image and Video Library

2013-08-09

CAPE CANAVERAL, Fla. – As seen on Google Maps, a Space Shuttle Main Engine, or SSME, stands inside the Engine Shop at Orbiter Processing Facility 3 at NASA's Kennedy Space Center. Each orbiter used three of the engines during launch and ascent into orbit. The engines burn super-cold liquid hydrogen and liquid oxygen and each one produces 155,000 pounds of thrust. The engines, known in the industry as RS-25s, could be reused on multiple shuttle missions. They will be used again later this decade for NASA's Space Launch System rocket. Google precisely mapped the space center and some of its historical facilities for the company's map page. The work allows Internet users to see inside buildings at Kennedy as they were used during the space shuttle era. Photo credit: Google/Wendy Wang

Prevalence of malaria parasitemia among clients seeking treatment for fever or malaria at drug stores in rural Tanzania 2004.

PubMed

Patrick Kachur, S; Schulden, Jeffrey; Goodman, Catherine A; Kassala, Herry; Elling, Berty Farida; Khatib, Rashid A; Causer, Louise M; Mkikima, Saidi; Abdulla, Salim; Bloland, Peter B

2006-04-01

To determine the prevalence of malaria parasitemia and other common illnesses among drug store clients in one rural community, with a view to the potential role of specialist drug stores in expanding coverage of effective malaria treatment to households in highly endemic areas. Follow-back study of 2466 client visits selected from all 10 drug stores operating in the town of Ikwiriri between May 30 and August 31 2004. Of these, 521 (21.2%) were made by or on behalf of persons ill with fever or malaria. Two hundred and ninety three were eligible as residents of the surrounding nine villages and all agreed to participate in the study. Each patient was evaluated by a clinical officer and provided a blood sample for malaria on the day of the shop visit, either at the shop or at home. Only 50 (17.1%) visits by or on behalf of febrile patients resulted in the purchase of an antimalarial drug, while an antipyretic medication was obtained at 226 visits (77.1%). Clinicians diagnosed malaria in 63.8% of patients. Malaria parasites were identified in blood film samples from 24.2% (95% CI: 19.6, 29.5). This is double the parasite prevalence rate of 10.7% (95% CI: 8.6, 13.1) obtained from a household survey of 1004 healthy individuals selected from these villages at the same time. It is not significantly lower than the prevalence observed among 880 clients presenting with fever at health facilities in the district: 29.7% (95% CI: 23.0, 37.3). The prevalence of malaria parasitemia among children younger than 5 years whose families sought fever treatment from drug stores (42.1%; 95% CI: 31.4, 53.5) was equal to that of children presenting with fever at health facilities (42.5%; 95% CI: 25.0, 62.2). Currently, drug store clients do not obtain malaria-specific treatment in the majority of cases where it might be warranted. Parasitological findings indicate that drug store clients, especially children, are as likely to be infected with malaria as patients seeking care for similar illnesses at health facilities. Drug stores may be attractive partners for policy makers eager to engage the private retail sector in expanding coverage of malaria treatment.

[Management of sexually transmitted infections by private pharmacies in Hanoi].

PubMed

Tran Van, Bac; Pham Minh, Khue; Strobel, Michel

2014-01-01

This cross-sectional study comprising quantitative and qualitative analysis of clinical practices was designed to evaluate the quality and relevance of management of sexually transmitted infections (STI) based on a syndrome approach by private pharmacies in Hanoi in 2010 compared to a similar study conducted in 2000. One investigator played the role of a customer presenting signs of STI. He visited 60 randomly selected private pharmacies in Hanoi and noted the treatments, questions and advice provided by pharmacists. The results show that pharmacists proposed a treatment for 87% of cases of urethral discharge and 30% of cases of genital ulcers. The patient was not asked any questions in 55% of cases. None of the prescriptions complied with national guidelines. Only 8.3% of pharmacists/shop assistants asked the "patient" questions concerning the spouse/partner and 20% provided advice (the use of condoms in 26.6% of cases and a screening test for HIV in only one case). Pharmacists/shop assistants recommended consulting a doctor in only 43.3% of cases or a specialized STI clinic in only 16.7% of cases. The behaviour of private pharmacists/shop assistants in Hanoi have not changed over the last ten years (2000-2010). They readily treat STI inappropriately and provide little advice concerning prevention, screening and treatment. In the age of the HIV pandemic and microbial resistance to antibiotics, patients with STI should be advised to seek management by competent public services.

[Aedes aegypti larval infestation index and identification of awareness, attitudes and practices related to Dengue in tire shops in Atlántico, Colombia].

PubMed

Maestre-Serrano, Ronald; Pacheco-Lugo, Lisandro; Salcedo-Mendoza, Soraya

2015-10-01

Objective To identify the awareness, attitudes and practices related to dengue in owners and workers of tire ships, as well as the levels of mosquito infestation in tire shops in Atlántico department - Colombia. Methods We conducted a descriptive study. The variables were described as percentages and measures of central tendency and dispersion. Index of larval infestation and containers were calculated in each of the municipalities studied. We visited and inspected 111 tire shops. 26.1 % (29/111) of these were found positive for Ae. aegypti larvae. The municipalities of Piojó, Santo Tomás, Santa Lucia, Sabanagrande and Luruaco were characterized by a higher larval infestation index. Results Regarding dengue, 90.9 % of respondents considered it a problem for them and their families. 94.6 % know that is transmitted by mosquitoes. 91.1 % know the vector larvae under the name "sarapico", 3.6 % as "gusarapo". 98.2 % felt that there is a relationship between the larva and Ae. aegypti mosquito. 100 % of participantes recognized tires to be a breeding for mosquitoes. 85.7% believed fever to be the most common symptom. 83 % reported accessing the health post to cure the disease. 90.8 % throw out unusable tires as if they were garbage. Conclusion In the population studied, there is good awareness of dengue and its vector. Nevertheless, there are problems related to attitudes and prevention practices.

KSC-02pd1091

NASA Image and Video Library

2002-06-28

KENNEDY SPACE CENTER, FLA. - Doug Buford, with the Aft Engine shop, works at removing a heat shield on Columbia, in the Orbiter Processing Facility. After small cracks were discovered on the LH2 Main Propulsion System (MPS) flow liners in two other orbiters, program managers decided to move forward with inspections on Columbia before clearing it for flight on STS-107. After removal of the heat shields, the three main engines will be removed. Inspections of the flow liners will follow. The July 19 launch of Columbia on STS-107 has been delayed a few weeks

KSC-02pd1092

NASA Image and Video Library

2002-06-28

KENNEDY SPACE CENTER, FLA. -- Doug Buford, with the Aft Engine shop, works at removing a heat shield on Columbia, in the Orbiter Processing Facility. After small cracks were discovered on the LH2 Main Propulsion System (MPS) flow liners in two other orbiters, program managers decided to move forward with inspections on Columbia before clearing it for flight on STS-107. After removal of the heat shields, the three main engines will be removed. Inspections of the flow liners will follow. The July 19 launch of Columbia on STS-107 has been delayed a few weeks

Assessing the performance, practices and roles of drug sellers/dispensers and mothers'/guardians' behaviour for common childhood conditions in Kibaha district, Tanzania.

PubMed

Nsimba, S E D

2007-10-01

In most third world countries, self-medication is common and pharmacies, drug stores and drug shops are important providers of health advice and inexpensive medicines. We used exit interviews to assess drug sellers'/dispensers' roles and consumers' behaviour in Kibaha district, Coast region, Tanzania. Exit interviews with mothers/guardians reported the following childhood conditions treated with or without prescriptions at drug shops: respiratory infections (34%), fever (21%), a combination of diarrhoea, acute respiratory infection (ARI) and fever (14%), diarrhoea alone (13%) and other conditions (17%). The majority of drug sellers/dispensers prescribed or dispensed branded drugs (85%) for most mothers/guardians who visited these drug shops. In addition, antibiotics in total were prescribed for 31% of the mothers/guardians. Of the antibiotics dispensed, 38% were not prescribed by clinicians. In total, oral rehydration salts (ORSs) (3%), antimalarials (sulphadoxine/pyrimethamine) (24%) and antipyretics (11%), were prescribed in 20% but were bought by only 9%; multivitamins (6%), cough mixtures (4%) and other drugs (2%) (antihelminthics, benzylbenzoate emulsions, ear and eye drops) were also purchased from these facilities. Of the diarrhoea case histories presented by simulated clients at the drug shops, only 35% of the bloody diarrhoea scenarios were accurately diagnosed for getting antibiotics as compared with 44% for watery diarrhoea for which the use of antibiotics were wrongly advised (P<0.01). Furthermore, drug sellers/dispensers in these drug shops recommended use of ORS less frequently (3%) for a combination of diarrhoea, ARI and fever, and 2% for ARI alone than for watery (29%) and bloody diarrhoea (32%), respectively, for children under five years of age (P<0.001). Antimicrobial agents were advised for ARI (38%), watery diarrhoea (44%) and bloody diarrhoea (35%), respectively, with no significant difference among the three common childhood conditions. Antipyretics were advised in almost all childhood conditions but were least in watery (2%) and bloody diarrhoea (4%). This study demonstrates that antibiotics are overused in both the urban and rural settings of Kibaha district and that this is due to both clinicians'and drug sellers'prescribing practices in public and private facilities. The use of branded drugs was more common than that of generic drugs in private pharmacies, drug stores and ordinary shops. It is hereby proposed that any intervention should focus on training both facilities in the district on selectively prescribing and rational use of antibiotics for ARI and diarrhoea, and also to prescribe and dispense generic drugs so that it costs patients less when they buy drugs in shops. There is a need to increase awareness in recommending the use of ORS for clients to manage watery and bloody diarrhoea, and ARI in children under five years of age.

piBox: A Platform for Privacy-Preserving Apps

DTIC Science & Technology

2012-10-03

media Arcade/Action! Books! Brain/Puzzles! Business! Cards/Casino! Casual! Comics! Communication! Education ! Entertainment! Finance! Health/Fitness... Lifestyle ! Live Wallpaper! Media/Video! Medical! Music/Audio! News/Magazines! Personalization! Photography! Productivity! Racing! Shopping! Social! Sports...Cells: A virtual mobile smartphone architecture. In SOSP, 2011. [4] Google App Engine. https://developers. google.com/appengine. [5] M. Backes, A. Kate

Michigan's District Focus Gets Traction: Partnership with Comprehensive Centers Provides Momentum

ERIC Educational Resources Information Center

Bailey, Bersheril; Coscarella, Mark; Kinnaman, Lisa

2012-01-01

Hitching a ride on an automotive metaphor comes easily when Michigan is at the center of the story. After the Michigan Department of Education (MDE) spent a couple years noodling in the design shop about the optimum drivers of school improvement, its education engineers were convinced that the local school district was positioned to shift the…

Development of Casting Process for Pressings of Pistons of Car Augmented Engines

NASA Astrophysics Data System (ADS)

Korostelev, V. F.; Denisov, M. S.

2017-01-01

Results of a study aimed at formation of a single-phase fine-grained structure in pistons during their production process involving isostatic pressing of liquid metal prior to the start of crystallization, pressing of the crystallizing metal, and holding under pressure in the process of cooling to the shop temperature are presented.

Engine Lathe Operator. Instructor's Guide. Part of Single-Tool Skills Program Series. Machine Industries Occupations.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of Secondary Curriculum Development.

Expected to help meet the need for trained operators in metalworking and suitable for use in the adult education programs of school districts, in manpower development and training programs, and in secondary schools, this guide consists of four sections: Introduction, General Job Content, Shop Projects, and Drawings for the Projects. General Job…

KSC-2009-5456

NASA Image and Video Library

2009-10-15

CAPE CANAVERAL, Fla. – At the Receipt Inspection Shop on Cape Canaveral Air Force Station in Florida, an ATK Space Systems' 60-inch graphite epoxy motor, or GEM, slated for launch of the GOES-P spacecraft rests on a work stand awaiting further processing. The United Launch Alliance Delta IV is the launch vehicle for GOES-P, the latest Geostationary Operational Environmental Satellite developed by NASA for the National Oceanic and Atmospheric Administration, or NOAA. Launch is targeted for March 4, 2010, from Launch Complex 37. For information on GOES-P, visit http://nasascience.nasa.gov/missions/goes-n-o-p. Photo credit: NASA/Dimitri Gerondidakis

KSC-2009-5454

NASA Image and Video Library

2009-10-15

CAPE CANAVERAL, Fla. – At the Receipt Inspection Shop on Cape Canaveral Air Force Station in Florida, ATK Space Systems workers guide a 60-inch graphite epoxy motor, or GEM, slated for launch of the GOES-P spacecraft as it is moved toward a work stand. The United Launch Alliance Delta IV is the launch vehicle for GOES-P, the latest Geostationary Operational Environmental Satellite developed by NASA for the National Oceanic and Atmospheric Administration, or NOAA. Launch is targeted for March 4, 2010, from Launch Complex 37. For information on GOES-P, visit http://nasascience.nasa.gov/missions/goes-n-o-p. Photo credit: NASA/Dimitri Gerondidakis

KSC-2009-5455

NASA Image and Video Library

2009-10-15

CAPE CANAVERAL, Fla. – At the Receipt Inspection Shop on Cape Canaveral Air Force Station in Florida, ATK Space Systems workers guide a 60-inch graphite epoxy motor, or GEM, slated for launch of the GOES-P spacecraft as it is lowered toward a work stand. The United Launch Alliance Delta IV is the launch vehicle for GOES-P, the latest Geostationary Operational Environmental Satellite developed by NASA for the National Oceanic and Atmospheric Administration, or NOAA. Launch is targeted for March 4, 2010, from Launch Complex 37. For information on GOES-P, visit http://nasascience.nasa.gov/missions/goes-n-o-p. Photo credit: NASA/Dimitri Gerondidakis

TAN HOT SHOP AND SUPPORT FACILITY UTILIZATION STUDY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phillips, Ken Crawforth

2001-11-01

Impacts to the U.S. Department of Energy (DOE) complex caused by early closure (prior to 2018) and Demolition and Dismantlement (D&D) of the Test Area North (TAN) hot shop and its support facilities are explored in this report. Various possible conditions, such as Standby, Safe Store and Lay-up, that the facility may be placed in prior to eventually being turned over to D&D are addressed. The requirements, impacts, and implications to the facility and to the DOE Complex are discussed for each condition presented in the report. Some details of the report reference the Idaho National Engineering and Environmental Laboratorymore » (INEEL) Spent Nuclear Fuel Life Cycle Baseline Plan, the INEEL 2000 Infrastructure Long Range Plan, and other internal INEEL reports.« less

TAN Hot Shop and Support Facility Utilization Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Picker, B.A.

2001-11-16

Impacts to the U.S. Department of Energy (DOE) complex caused by early closure (prior to 2018) and Demolition and Dismantlement (D and D) of the Test Area North (TAN) hot shop and its support facilities are explored in this report. Various possible conditions, such as Standby, Safe Store and Lay-up, that the facility may be placed in prior to eventually being turned over to D and D are addressed. The requirements, impacts, and implications to the facility and to the DOE Complex are discussed for each condition presented in the report. Some details of the report reference the Idaho Nationalmore » Engineering and Environmental Laboratory (INEEL) Spent Nuclear Fuel Life Cycle Baseline Plan, the INEEL 2000 Infrastructure Long Range Plan, and other internal INEEL reports.« less

Trichloroethylene and stoddard solvent reduction alternatives in a small shop. 1989 summer intern report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor, D.J.

1989-12-31

Aero Precision Engineering Corp. is a small screw machine shop which produces precision parts for industry located in St. Paul Park, MN. The project focused on identifying satisfactory water-based substitutes for trichloroethylene (TCE) used both as a vapor degreaser and as a cold solvent in a small covered container. At the time of the project, the company used about 500 gallons of trichloroethylene with approximately 165 gallons shipped off site as waste annually. The solvent was used primarily to remove cutting oil and metal chips from production parts. In identifying a standard for evaluating alterantives to the solvent for cleaning,more » it was noted that parts cleaned in the cold bucket were definitely not as clean as those cleaned in the vapor degreaser.« less

Female Staff Members in the Fabrication Shop

NASA Image and Video Library

1944-06-21

The loss of male NACA employees to the war effort and the military’s increased demand for expedited aeronautical research results resulted in a sharp demand for increased staffing in the early 1940s. The Aircraft Engine Research Laboratory (AERL) undertook an extensive recruiting effort to remedy the situation. Current employees were asked to bring in friends and family members, including women. The number of women employed at the AERL nearly doubled to 412 between 1943 and 1944. In May 1944 Director Raymond Sharp initiated a program to train women as machine operators, electricians, instrumentation engineers, and other technical positions. The move coincided with the lab’s implementation of a third shift to meet the military’s demands for improved aircraft performance. There was also a modest, but important, number of female engineers and chemists, as well as large group employed in more traditional positions such as data analysts, editors, and clerks. The integration of women in the research process was critical. Researchers developed a test and submitted plans to the Drafting Section to be converted into blueprints. In some instances the Instrumentation Shop was asked to create instruments for the test. During the test, computers gathered and analyzed the data. The researcher then wrote the report which was reviewed by the Editorial Department and printed in the Duplication Unit. All of these tasks were generally performed by female employees.

Online detection of potential duplicate medications and changes of physician behavior for outpatients visiting multiple hospitals using national health insurance smart cards in Taiwan.

PubMed

Hsu, Min-Huei; Yeh, Yu-Ting; Chen, Chien-Yuan; Liu, Chien-Hsiang; Liu, Chien-Tsai

2011-03-01

Doctor shopping (or hospital shopping), which means changing doctors (or hospitals) without professional referral for the same or similar illness conditions, is common in Hong Kong, Taiwan and Japan. Due to the lack of infrastructure for sharing health information and medication history among hospitals, doctor-shopping patients are more likely to receive duplicate medications and suffer adverse drug reactions. The Bureau of National Health Insurance (BNHI) adopted smart cards (or NHI-IC cards) as health cards in Taiwan. With their NHI-IC cards, patients can freely access different medical institutions. Because an NHI-IC card carries information about a patient's prescribed medications received from different hospitals nationwide, we used this system to address the problem of duplicate medications for outpatients visiting multiple hospitals. A computerized physician order entry (CPOE) system was enhanced with the capability of accessing NHI-IC cards and providing alerts to physicians when the system detects potential duplicate medications at the time of prescribing. Physician responses to the alerts were also collected to analyze changes in physicians' behavior. Chi-square tests and two-sided z-tests with Bonferroni adjustments for multiple comparisons were used to assess statistical significance of differences in actions taken by physicians over the three months. The enhanced CPOE system for outpatient services was implemented and installed at the Pediatric and Urology Departments of Taipei Medical University Wan-Fang Hospital in March 2007. The "Change Log" that recorded physician behavior was activated during a 3-month study period from April to June 2007. In 67.93% of patient visits, the physicians read patient NHI-IC cards, and in 16.76% of the reads, the NHI-IC card contained at least one prescribed medication that was taken by the patient. Among the prescriptions issued by physicians, on average, there were 2.36% prescriptions containing at least one medication that might be duplicative to the prior prescriptions stored in NHI-IC cards. The rate of potential duplicate medication alerts for the Pediatric Department was higher than that for the Urology Department (2.78% versus 1.67%). However, the rate of revisions to prescriptions was higher in the Urology Department than the Pediatric Department. Overall, the rate of physicians reviewing and revising their prescriptions was 29.25%; the rate of physicians reviewing without revising their prescriptions was 43.62%; the rate of physicians turning off the alert screens right after the screens popped up (overridden) was 27.13%. Thus, physicians accepted alerts to review their prescriptions with patients in most situations (72.87%). Moreover, over the study period, the rate of total revisions made to prescriptions increased and the "overridden" rate decreased. Our approach enhances the capability of CPOE systems using NHI-IC cards as a nationwide infrastructure to provide more complete patient health information and medication history sharing among hospitals in Taiwan. Thus, our system can provide a better prescribing tool to help physicians detect potential duplicate medications for frequent doctor-shopping patients and hence enhance patient safety across hospital boundaries. However, the effectiveness of detecting duplicate medications with our approach is very much dependent on the completeness of NHI-IC cards, which in turn primarily depends on physician use of the cards when prescribing. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Goldman visits Washington, D.C.

NASA Image and Video Library

2009-03-24

Stennis Space Center Director Gene Goldman (right) visited Washington, D.C,. last month, where he called on Louisiana and Mississippi leaders to update them on work at the rocket engine testing facility. Rep. Gene Taylor, D-Miss., was among those visited by Goldman on March 24.

KSC-2011-7883

NASA Image and Video Library

2011-11-22

CAPE CANAVERAL, Fla. -- The pressurized vessel of The Boeing Co.'s Commercial Crew Transportation System, which could take NASA astronauts to the International Space Station, is on display in Orbiter Processing Facility-3 (OPF-3) at NASA's Kennedy Space Center in Florida. Boeing is maturing its CST-100 spacecraft design for NASA's Commercial Crew Program (CCP) under the Commercial Crew Development Round 2 (CCDev2) activities. Boeing's current design shows the CST-100 taking up to seven astronauts and cargo to the space station or other low Earth orbit destinations by the middle of the decade. Through an agreement with NASA and Space Florida, Boeing is leasing OPF-3, the Processing Control Facility (PCC) and Space Shuttle Main Engine Shop at Kennedy to design, manufacture, process and integrate the CST-100. This work is expected to generate up to 550 engineering and technical jobs for Florida's Space Coast. Chuck Hardison, Boeing's production and ground operations manager, explained that the CST-100 will be manufactured using a spin-form technology, which is expected to bring down the cost and safety concerns of a traditional welded spacecraft. It's innovations such as this that CCP hopes will drive down the cost of space travel as well as open up space to more people than ever before. Seven aerospace companies are maturing launch vehicle and spacecraft designs under CCDev2, including Alliant Techsystems Inc. (ATK) of Promontory, Utah, Blue Origin of Kent, Wash., The Boeing Co., of Houston, Excalibur Almaz Inc. of Houston, Sierra Nevada Corp. of Louisville, Colo., Space Exploration Technologies (SpaceX) of Hawthorne, Calif., and United Launch Alliance (ULA) of Centennial, Colo. For more information, visit www.nasa.gov/exploration/commercial Photo credit: Jim Grossmann

KSC-2011-7884

NASA Image and Video Library

2011-11-22

CAPE CANAVERAL, Fla. -- Chuck Hardison, the production and ground operations manager of The Boeing Co.'s Commercial Crew Transportation System, talks to media about plans to take NASA astronauts to the International Space Station in Orbiter Processing Facility-3 (OPF-3) at NASA's Kennedy Space Center in Florida. Boeing is maturing its CST-100 spacecraft design for NASA's Commercial Crew Program (CCP) under the Commercial Crew Development Round 2 (CCDev2) activities. Boeing's current design shows the CST-100 taking up to seven astronauts and cargo to the space station or other low Earth orbit destinations by the middle of the decade. Through an agreement with NASA and Space Florida, Boeing is leasing OPF-3, the Processing Control Facility (PCC) and Space Shuttle Main Engine Shop at Kennedy to design, manufacture, process and integrate the CST-100. This work is expected to generate up to 550 engineering and technical jobs for Florida's Space Coast. Hardison explained that the CST-100 will be manufactured using a spin-form technology, which is expected to bring down the cost and safety concerns of a traditional welded spacecraft. It's innovations such as this that CCP hopes will drive down the cost of space travel as well as open up space to more people than ever before. Seven aerospace companies are maturing launch vehicle and spacecraft designs under CCDev2, including Alliant Techsystems Inc. (ATK) of Promontory, Utah, Blue Origin of Kent, Wash., The Boeing Co., of Houston, Excalibur Almaz Inc. of Houston, Sierra Nevada Corp. of Louisville, Colo., Space Exploration Technologies (SpaceX) of Hawthorne, Calif., and United Launch Alliance (ULA) of Centennial, Colo. For more information, visit www.nasa.gov/exploration/commercial Photo credit: Jim Grossmann

Paint shop, coach shop, car shop, and blacksmith shop (all ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Paint shop, coach shop, car shop, and blacksmith shop (all car department), all north of the roadhouse and locomotive shops. Photographed between 1880 and 1888 - Chicago, Burlington & Quincy Railroad, Roundhouse & Shops, Broadway & Spring Streets, Aurora, Kane County, IL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kochin, I.V.; Belichenko, A.G.; Livshits, B.Ya.

Modern mechanical methods of coal processing involve crushing and the emission of coal dust in substantial amounts into the shop atmosphere, along with noise and vibration problems. Wet cleaning processes produce high humidity, while flotation involves the use of toxic reagents (alcohols, oils, kerosene). The air in flotation shops reaches humidities of 91 to 95% at 20.1 to 24.3/sup 0/C and contains 1.6 to 28.2 mg/m/sup 3/ of coal dust (with 1.4 to 7.9% SiO/sub 2/) and up to 600 mg/m/sup 3/ of kerosene vapors. The introduction of process improvements, automation, and mechanization brings about a correlated reduction in absenteeismmore » through illness. Automation in the flotation section has improved both technical and economic performance; the labor productivity index has risen by 40% and the ash of the tailings has increased by 10%, while the phenols content of the shop effluent and the concentration of kerosene vapors in the shop have decreased by factors of 6.5 and 3 respectively. The working conditions have been correspondingly improved. It is worthwhile and necessary to extend and improve the work of the medical-engineering team. This represents a novel form of collaboration between the medical services and the plant staff, to overcome health problems, control health and safety hazards and improve the health of the labor force. Reductions in man-hour losses from illness provide a major source of increased working time and labor productivity.« less

Skylab mission report, third visit

NASA Technical Reports Server (NTRS)

1974-01-01

An evaluation is presented of the operational and engineering aspects of the third Skylab visit, including information on the performance of the command and service module and the experiment hardware, the crew's evaluation of the visit, and other visit-related areas of interest such as biomedical observations. The specific areas discussed are contained in the following: (1) solar physics and astrophysics investigations; (2) Comet Kohoutek experiments; (3) medical experiments; (4) earth observations, including data for the multispectral photographic facility, the earth terrain camera, and the microwave radiometer/scattermometer and altimeter; (5) engineering and technology experiments; (6) food and medical operational equipment; (7) hardware and experiment anomalies; and (8) mission support, mission objectives, flight planning, and launch phase summary. Conclusions discussed as a result of the third visit to Skylab involve the advancement of the sciences, practical applications, the durability of man and systems in space, and spaceflight effectiveness and economy.

5. Photographic copy of construction drawing, dated May 7, 1943, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Photographic copy of construction drawing, dated May 7, 1943, U.S. Engineers Field Office, Selfridge Field, in possession of Selfridge Base Museum, Mt. Clemens, Michigan. CHANGES AND ADDITIONS TO MOTOR REPAIR SHOP, JOB N-354, DRAWING NO. 1/300. - Selfridge Field, Building No. 197, East of Jefferson Avenue between George & Railroad Streets, Mount Clemens, Macomb County, MI

A&M. TAN607. Structural supports for biparting door on east wall ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. TAN-607. Structural supports for biparting door on east wall of hot shop. Special services cubicle shielding. Ralph M. Parsons 902-3-ANP-607-S141. Date: December 1952. Approved by INEEL Classification Office for public release. INEEL index code no. 034-0607-60-693-106785 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

KSC-04pd1056

NASA Image and Video Library

2004-05-07

KENNEDY SPACE CENTER, FLA. -- STS-114 Mission Specialist Soichi Noguchi looks closely at low pressure oxidizer duct in the Space Shuttle Main Engine Shop at KSC. He and other crew members are touring several areas on the Center. The STS-114 mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment plus the external stowage platform to the International Space Station.

Controlling the Internal Heat Transfer Coefficient by the Characteristics of External Flows

NASA Astrophysics Data System (ADS)

Zhuromskii, V. M.

2018-01-01

The engineering-physical fundamentals of substance synthesis in a boiling apparatus are presented. We have modeled a system of automatic stabilization of the maximum internal heat transfer coefficient in such an apparatus by the characteristics of external flows on the basis of adaptive seeking algorithms. The results of operation of the system in the shop are presented.

Petroleum Dependency: The Case to Replace the Internal Combustion Engine

DTIC Science & Technology

2015-02-17

at Ft. Benning, Georgia where he was commissioned an Ordnance Officer. During his career, COL Melton served as a Maintenance Platoon Leader/ Shop ...reasons to stay with the ICE, there are greater reasons to explore alternatives. In fact, there is no logical reason to stay with the antiquated ...hydrogen fueling systems while antiquated vehicle platform inventories dwindle away. 50

Explore engineering with solar energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davidson, J.H.

1995-11-01

An outreach program was initiated at the University of Minnesota by faculty and student members of the Society of Women Engineers in the spring of 1994 to interest students in 3rd through 9th grade, particularly girls, in careers in engineering. Interaction with elementary and junior high students focuses on hands-on experiences with portable solar devices. This paper reports progress of the program including descriptions of the solar devices, their use in visits to local schools, day visits to the University, and week-long summer camps, and continuing education programs for elementary and secondary school teachers.

NASA LaRC Hazardous Material Pharmacy

NASA Technical Reports Server (NTRS)

Esquenet, Remy

1995-01-01

In 1993-1994 the Office of Environmental Engineering contracted SAIC to develop NASA Langley's Pollution Prevention (P2) Program. One of the priority projects identified in this contract was the development of a hazardous waste minimization (HAZMIN)/hazardous materials reutilization (HAZMART) program in the form of a Hazardous Materials Pharmacy. A hazardous materials pharmacy is designed to reduce hazardous material procurement costs and hazardous waste disposal costs. This is accomplished through the collection and reissue of excess hazardous material. Currently, a rarely used hazardous material may be stored in a shop area, unused, until it passes its expiration date. The material is then usually disposed of as a hazardous waste, often at a greater expense than the original cost of the material. While this material was on the shelf expiring, other shop areas may have ordered new supplies of the same material. The hazardous material pharmacy would act as a clearinghouse for such materials. Material that is not going to be used would be turned in to the pharmacy. Other users could then be issued this material free of charge, thereby reducing procurement costs. The use of this material by another shop prevents it from expiring, thereby reducing hazardous waste disposal costs.

Exposure of Trucking Company Workers to Particulate Matter during the Winter

PubMed Central

Lee, Byeong-Kyu; Smith, Thomas J.; Garshick, Eric; Natkin, Jonathan; Reaser, Paul; Lane, Kevin; Lee, Haengah Kim

2006-01-01

This study analyzed the workplace area concentrations and the personal exposure concentrations to fine particulate (PM2.5), elemental carbon (EC), and organic carbon (OC) measured during the winter period in trucking companies. The averaged personal exposure concentrations at breathing zones of workers are much greater than those of the microenvironment concentrations. The highest difference between the area (microenvironment) and personal exposure concentrations was in the PM2.5 concentrations followed by the OC concentrations. The area concentrations of PM2.5, EC, and OC at a large terminal were higher than those at a small one. The highest area concentrations of PM2.5, EC, and OC were observed in the shop areas followed by pick-up and delivery (P&D) areas. The area concentrations and personal exposure to PM2.5, EC, and OC in the shop and P&D areas which are highly affected by diesel engine exhaust emissions were much higher than those in the docks which are significantly affected by liquefied petroleum gas (LPG) engine exhaust emissions. The highest EC fraction to the total carbon (EC + OC) concentrations was observed in the shops, while the lowest one was identified in the offices. The personal exposure of the smoking workers to PM2.5 and OC was much higher than that of the non-smoking workers. However, the smoking might not significantly contribute to the personal exposure to EC. There were significant correlations between the PM2.5 and OC concentrations in both the area and personal exposure concentrations. However, significant correlations between the PM2.5 and EC concentrations and between the OC and EC concentrations were not identified. PMID:15913707

Biomedical Engineering | Classification | College of Engineering & Applied

Science.gov Websites

Engineering, Biomedical Engineering(414) 229-6614wjchang@uwm.eduEng & Math Sciences 1113 profile photo Malkoc, Ph.D.Visiting Assistant ProfessorBiomedical Engineering414-229-6919malkoc@uwm.eduEng & Math Engineering / Electrical Engineering(414) 229-3327misra@uwm.eduEng & Math Sciences E-314 profile photo

Summary report for CF6 jet engine diagnostics program

NASA Technical Reports Server (NTRS)

Fasching, W. A.; Stricklin, R.

1982-01-01

Cockpit cruise recordings and test cell data in conjunction with hardware inspection results from airline overhaul shops were analyzed to define the extent and magnitude of performance deterioration of the General Electric CF6 high bypass turbofan engines. The magnitude of Short Term deterioration from the Long Term was isolated and the individual damage mechanisms that were the cause for the majority of the performance deterioration were identified. A potential for reduction in compressor clearance and a potential for improvement in turbine roundness, which corresponds to cruise SFC reductions of 0.38 and 0.36 percent, respectively, were identified.

Ergonomic design of a barber's workstation.

PubMed

al-Haboubi, M H; Baig, A

1997-06-01

Long hours of work while standing have been known to cause health problems for humans. Such professions include that of the barber. A survey was conducted of barbers from different barber shops in Saudi Arabia to determine their discomfort level. A prototype workstation was then designed and constructed in which the barber sits and performs work. The workstation was tested by nine barbers in the Human Factors Laboratory in the Systems Engineering Department at King Fahd University of Petroleum and Minerals. These barbers were among those surveyed earlier in their shops. Their discomfort level was again taken and an experiment was conducted to design the shape of the footrest. The discomfort levels obtained while standing and sitting were statistically analysed. From the results, it was concluded that the mean of the discomfort levels while standing is significantly (alpha = 0.01) higher than that while sitting.

Blood lead levels in radiator repair workers in Colorado.

PubMed

Dalton, C B; McCammon, J B; Hoffman, R E; Baron, R C

1997-01-01

A laboratory-based blood lead surveillance system in Colorado identified radiator repair workers as having the highest blood lead levels of all worker groups reported. A survey of 42 radiator repair shops in ten locales throughout Colorado was undertaken to estimate the prevalence of workers with elevated blood lead levels > 25 micrograms/dL. The survey was designed to test the sensitivity of the surveillance system and to assess working conditions and practices in the radiator repair industry in Colorado. Of 63 workers, 39 (62%) had blood lead levels > 25 micrograms/dL. The sensitivity of the surveillance system for detecting radiator repair workers with elevated blood lead levels was estimated at 11%. None of the radiator repair shops had adequate local exhaust ventilation. Work practice and engineering modifications are needed to reduce lead exposure in this industry.

Creating a Parallel Version of VisIt for Microsoft Windows

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitlock, B J; Biagas, K S; Rawson, P L

2011-12-07

VisIt is a popular, free interactive parallel visualization and analysis tool for scientific data. Users can quickly generate visualizations from their data, animate them through time, manipulate them, and save the resulting images or movies for presentations. VisIt was designed from the ground up to work on many scales of computers from modest desktops up to massively parallel clusters. VisIt is comprised of a set of cooperating programs. All programs can be run locally or in client/server mode in which some run locally and some run remotely on compute clusters. The VisIt program most able to harness today's computing powermore » is the VisIt compute engine. The compute engine is responsible for reading simulation data from disk, processing it, and sending results or images back to the VisIt viewer program. In a parallel environment, the compute engine runs several processes, coordinating using the Message Passing Interface (MPI) library. Each MPI process reads some subset of the scientific data and filters the data in various ways to create useful visualizations. By using MPI, VisIt has been able to scale well into the thousands of processors on large computers such as dawn and graph at LLNL. The advent of multicore CPU's has made parallelism the 'new' way to achieve increasing performance. With today's computers having at least 2 cores and in many cases up to 8 and beyond, it is more important than ever to deploy parallel software that can use that computing power not only on clusters but also on the desktop. We have created a parallel version of VisIt for Windows that uses Microsoft's MPI implementation (MSMPI) to process data in parallel on the Windows desktop as well as on a Windows HPC cluster running Microsoft Windows Server 2008. Initial desktop parallel support for Windows was deployed in VisIt 2.4.0. Windows HPC cluster support has been completed and will appear in the VisIt 2.5.0 release. We plan to continue supporting parallel VisIt on Windows so our users will be able to take full advantage of their multicore resources.« less

Structural investigation of websites of selected educational hospitals of Shiraz University of Medical Sciences from Patient Relationship Management (PRM) perspective.

PubMed

Bakhshi, Mahdieh; Monem, Hossein; Barati, Omid; Sharifian, Roxana; Nematollahi, Mohtaram

2017-07-01

Hospital websites are considered as an appropriate system for exchanging information and establishing communication between patients, hospitals, and medical staff. Website character, website contact interactivity, shopping convenience, as well as care and service are the factors that the present study investigated as far as the patient relationship management is concerned. This descriptive-analytical study was conducted on 206 patients visiting Shahid Faghihi and Ali Asghar Hospitals in Shiraz, which were capable of offering electronic services. The data collection tool was a researcher-made questionnaire based on the Mekkamol model and other similar studies, as well as investigations into the websites of the world's top hospitals. The questionnaire's validity was approved by a committee of experts and its reliability was approved based on a 54-patient sample with a Cronbach's alpha of 0.94. The data were analyzed using the Structural Equation Modeling (SEM) with partial least squares (PLS) approach and by utilizing SPSS and Smart-PLS V2 software programs. The results showed that there are significant relationships between "website character" and "website contact interactivity" (p=0.00), between "shopping convenience" and "website contact interactivity" (p=0.00), and between "website contact interactivity" and "care and service" (p=0.00). Website design with such characteristics as website simplicity, shopping convenience, authenticity of information, and provision of such services as admission, scheduling appointments, and electronic payment of bills will result in interaction and communication between patients and hospital websites. This will, for its turn, pave the way for attracting more patients.

Fusing Quantitative Requirements Analysis with Model-based Systems Engineering

NASA Technical Reports Server (NTRS)

Cornford, Steven L.; Feather, Martin S.; Heron, Vance A.; Jenkins, J. Steven

2006-01-01

A vision is presented for fusing quantitative requirements analysis with model-based systems engineering. This vision draws upon and combines emergent themes in the engineering milieu. "Requirements engineering" provides means to explicitly represent requirements (both functional and non-functional) as constraints and preferences on acceptable solutions, and emphasizes early-lifecycle review, analysis and verification of design and development plans. "Design by shopping" emphasizes revealing the space of options available from which to choose (without presuming that all selection criteria have previously been elicited), and provides means to make understandable the range of choices and their ramifications. "Model-based engineering" emphasizes the goal of utilizing a formal representation of all aspects of system design, from development through operations, and provides powerful tool suites that support the practical application of these principles. A first step prototype towards this vision is described, embodying the key capabilities. Illustrations, implications, further challenges and opportunities are outlined.

KSC-2009-5453

NASA Image and Video Library

2009-10-15

CAPE CANAVERAL, Fla. – At the Receipt Inspection Shop on Cape Canaveral Air Force Station in Florida, an ATK Space Systems' 60-inch graphite epoxy motor, or GEM, slated for launch of the GOES-P spacecraft is lifted from the tractor-trailer in which it was delivered. The United Launch Alliance Delta IV is the launch vehicle for GOES-P, the latest Geostationary Operational Environmental Satellite developed by NASA for the National Oceanic and Atmospheric Administration, or NOAA. Launch is targeted for March 4, 2010, from Launch Complex 37. For information on GOES-P, visit http://nasascience.nasa.gov/missions/goes-n-o-p. Photo credit: NASA/Dimitri Gerondidakis

Do perceptions of direct-to-consumer pharmaceutical advertising vary based on urban versus rural living?

PubMed

Spake, Deborah F; Joseph, Mathew; Megehee, Carol M

2014-01-01

This study explores the connection between perceptions of direct-to-consumer (DTC) advertising based on where people live and shop. Urban consumers were found to be more skeptical of DTC advertising, but more likely to believe that physicians select pharmaceuticals based on the efficacy of the product. Those living in rural areas were more motivated to visit a doctor and more likely to feel an equal doctor-patient relationship after exposure to DTC advertising. Interaction effects among gender, income, and education were detected, as well as an interaction effects between location and income on views of DTC advertising.

NewProt - a protein engineering portal.

PubMed

Schwarte, Andreas; Genz, Maika; Skalden, Lilly; Nobili, Alberto; Vickers, Clare; Melse, Okke; Kuipers, Remko; Joosten, Henk-Jan; Stourac, Jan; Bendl, Jaroslav; Black, Jon; Haase, Peter; Baakman, Coos; Damborsky, Jiri; Bornscheuer, Uwe; Vriend, Gert; Venselaar, Hanka

2017-06-01

The NewProt protein engineering portal is a one-stop-shop for in silico protein engineering. It gives access to a large number of servers that compute a wide variety of protein structure characteristics supporting work on the modification of proteins through the introduction of (multiple) point mutations. The results can be inspected through multiple visualizers. The HOPE software is included to indicate mutations with possible undesired side effects. The Hotspot Wizard software is embedded for the design of mutations that modify a proteins' activity, specificity, or stability. The NewProt portal is freely accessible at http://newprot.cmbi.umcn.nl/ and http://newprot.fluidops.net/. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

A&M. Radioactive parts security storage area, TAN647 and TAN648. Plot ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. Radioactive parts security storage area, TAN-647 and TAN-648. Plot plan, fencing details. Relationship to hot shop and railroad turntable. Ralph M. Parsons 1480-7-ANP/GE-3-102. Date: November 19958. Approved by INEEL Classification Office for public release. INEEL index no. 034-0100-00-693-107447 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

Alternative Fuels Data Center: Maryland Conserves Fuel With Hybrid Trucks

Science.gov Websites

reducing fuel consumption, engine noise, and greenhouse gas emissions with hybrid trucks. For information of a car Electric Vehicles Charge up at State Parks in West Virginia Dec. 9, 2017 Photo of a car Smart Car Shopping Nov. 4, 2017 Photo of a truck Natural Gas Vehicles Make a Difference in Tennessee Oct

24. View toward the northeast of the interior of the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

24. View toward the northeast of the interior of the blacksmith shop. Note the wall-hung crane on the east wall at the right. The olden door at the left led to the material track; the ramp and door in the northeast corner (center of photograph) gave access to the material platform. - Central Railroad of New Jersey, Engine Terminal, Jersey City, Hudson County, NJ

Attitude Control of a Satellite Simulator Using Reaction Wheels and a PID Controller

DTIC Science & Technology

2010-03-01

allow continuous and smooth control while inducing the smallest possible disturbance torques. The objective of this research is to design , build...making me feel welcome in their machine shop and for educating me on the difficulties of fabricating my engineering designs . On a personal note, much...3.16. SimSat II Reaction Wheel Designs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 3.17. EPOS 70/10 Velocity Controller

NACA Apprentice is Trained on the Lab's Altitude Systems

NASA Image and Video Library

1955-02-21

An apprentice at the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory shown training on the altitude supply air systems in the Engine Research Building. An ongoing four-year apprentice program was established at the laboratory in 1949 to facilitate the close interaction of the lab’s engineers, mechanics, technicians, and scientists. The apprentice school covered a variety of trades including aircraft mechanic, electronics instrumentation, machinist, and altitude systems mechanic, seen in this photograph. The apprentices rotated through the various shops and facilities to provide them with a well-rounded understanding of the work at the lab. The specialized skills required meant that NACA apprentices were held to a higher standard than those in industry. They had to pass written civil service exams before entering the program. Previous experience with mechanical model airplanes, radio transmission, six months of work experience, or one year of trade school was required. The Lewis program was certified by both the Department of Labor and the State of Ohio. One hundred fifty of the 2,000 hours of annual training were spent in the classroom. The remainder was devoted to study of models and hands-on work in the facilities. Examinations were coupled with evaluation by supervisors in the shops. The apprentices were promoted through a series of grades until they reached journeyman status. Those who excelled in the Apprentice Program would be considered for a separate five-year engineering draftsman program.

Using the PRECEDE Planning Approach to Develop a Physical Activity Intervention for African American Men Who Visit Barbershops: Results From the FITShop Study

PubMed Central

Hood, Sula; Linnan, Laura; Jolly, David; Muqueeth, Sadiya; Hall, Marla B.; Dixon, Carrissa; Robinson, Seronda

2016-01-01

African American (AA) men have a higher prevalence of many chronic disease risk behaviors compared to Caucasian men, including physical inactivity. Innovative ways to reach AA men with interventions to increase physical activity (PA) and decrease other key risk factors are needed to reduce health disparities in this population. The barbershop is a natural but underutilized setting for reaching AA men. In the Fitness in the Shop (FITShop) study, shop owners, barbers, and customers were recruited from four local barbershops to complete structured interviews and customer focus groups. We assessed knowledge, perceived barriers, and interests/concerns about PA, as well as explored how to best intervene in the barbershop. Barbers and customers endorsed the idea of receiving health and PA information in the barbershop. These formative research results generated information and strategies for developing a multilevel barbershop-based health intervention to promote PA in the barbershop. This article describes the formative research results and how PRECEDE was used to develop a culturally and contextually appropriate, multilevel barbershop-based intervention designed to promote PA and to reduce chronic disease disparities among AA men. PMID:24972715

Reliability of the hospital nutrition environment scan for cafeterias, vending machines, and gift shops.

PubMed

Winston, Courtney P; Sallis, James F; Swartz, Michael D; Hoelscher, Deanna M; Peskin, Melissa F

2013-08-01

According to ecological models, the physical environment plays a major role in determining individual health behaviors. As such, researchers have started targeting the consumer nutrition environment of large-scale foodservice operations when implementing obesity-prevention programs. In 2010, the American Hospital Association released a call-to-action encouraging health care facilities to join in this movement and improve their facilities' consumer nutrition environments. The Hospital Nutrition Environment Scan (HNES) for Cafeterias, Vending Machines, and Gift Shops was developed in 2011, and the present study evaluated the inter-rater reliability of this instrument. Two trained raters visited 39 hospitals in southern California and completed the HNES. Percent agreement, kappa statistics, and intraclass correlation coefficients were calculated. Percent agreement between raters ranged from 74.4% to 100% and kappa statistics ranged from 0.458 to 1.0. The intraclass correlation coefficient for the overall nutrition composite scores was 0.961. Given these results, the HNES demonstrated acceptable reliability metrics and can now be disseminated to assess the current state of hospital consumer nutrition environments. Copyright © 2013 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Using the PRECEDE Planning Approach to Develop a Physical Activity Intervention for African American Men Who Visit Barbershops: Results From the FITShop Study.

PubMed

Hood, Sula; Linnan, Laura; Jolly, David; Muqueeth, Sadiya; Hall, Marla B; Dixon, Carrissa; Robinson, Seronda

2015-07-01

African American (AA) men have a higher prevalence of many chronic disease risk behaviors compared to Caucasian men, including physical inactivity. Innovative ways to reach AA men with interventions to increase physical activity (PA) and decrease other key risk factors are needed to reduce health disparities in this population. The barbershop is a natural but underutilized setting for reaching AA men. In the Fitness in the Shop (FITShop) study, shop owners, barbers, and customers were recruited from four local barbershops to complete structured interviews and customer focus groups. We assessed knowledge, perceived barriers, and interests/concerns about PA, as well as explored how to best intervene in the barbershop. Barbers and customers endorsed the idea of receiving health and PA information in the barbershop. These formative research results generated information and strategies for developing a multilevel barbershop-based health intervention to promote PA in the barbershop. This article describes the formative research results and how PRECEDE was used to develop a culturally and contextually appropriate, multilevel barbershop-based intervention designed to promote PA and to reduce chronic disease disparities among AA men. © The Author(s) 2014.

Bolden STEM Event

NASA Image and Video Library

2011-01-28

NASA Administrator Charles Bolden visits with students from Albert Hill Middle School during a visit to the MathScience Innovation Center, Friday, Jan. 28, 2011, in Richmond, Va. During his visit, Bolden highlighted the importance of science, technology, engineering and math, or STEM, as he shared his life experiences with the students. Photo Credit:(NASA/Paul E. Alers)

Optical Engineering | CTIO

Science.gov Websites

Program PIA Program GO-FAAR Program Other Opportunities Tourism Visits to Tololo Astro tourism in Chile Tourism in Chile Information for travelers Visit Tololo Media Relations News Press Release Publications

Craftsmen in the Wood Model Shop at the Lewis Flight Propulsion Laboratory

NASA Image and Video Library

1953-01-21

Craftsmen work in the wood model shop at the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory. The Fabrication Division created almost all of the equipment and models used at the laboratory. The Fabrication Shop building contained a number of specialized shops in the 1940s and 1950s. These included a Machine Shop, Sheet Metal Shop, Wood Model and Pattern Shop, Instrument Shop, Thermocouple Shop, Heat Treating Shop, Metallurgical Laboratory, and Fabrication Office. The Wood Model and Pattern Shop created everything from control panels and cabinets to aircraft models molds for sheet metal work.

16. Interior, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

16. Interior, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to south (90mm lens). Note the large segmental-arched doorway to move locomotives in and out of Machine Shop. - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

The historical evolution of engineering degrees: competing stakeholders, contestation over ideas, and coherence across national borders

NASA Astrophysics Data System (ADS)

Case, Jennifer M.

2017-11-01

Recent times have seen significant realignment of engineering degrees globally, most notably in the Washington Accord, a system of mutual recognition of accreditation across much of the Anglophone world and beyond, and the Bologna Process, impacting significantly on the form of engineering degrees in Europe. This article, tracing the historical evolution of engineering degrees, argues that recent events can be seen to be part of an ongoing process of reworking the arrangements for formal engineering education, based on a long-standing contradiction between the different stakeholders that have an interest in curriculum: the state, engineering employers, and academics. This is reflected in a contestation over what was historically termed the 'shop culture' of the employers versus the 'school culture' of the academy. Furthermore, contemporary developments of mutual accreditation beyond national borders can be seen to have an earlier echo in the relative measure of global coherence that was achieved in the 1870s.

14. Interior, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. Interior, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to north (90mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

12. Interior, Blacksmith Shop, Roundhouse Machine Shop Extension, Southern Pacific ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. Interior, Blacksmith Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to northwest (90mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

Team 278 gets help from KSC machine shop

NASA Technical Reports Server (NTRS)

2000-01-01

The Hero Team (278) gets some help from a Kennedy Space Center research and development machine shop in repairing their robot, named Hero. The team of Edgewater High School students was co- sponsored by NASA Kennedy Space Center and Honeywell. Students from all over the country are at the KSC Visitor Complex for the FIRST (For Inspiration and Recognition of Science and Technology) Southeast Regional competition March 9-11 in the Rocket Garden. Teams of high school students are testing the limits of their imagination using robots they have designed, with the support of business and engineering professionals and corporate sponsors, to compete in a technological battle against other schools' robots. Of the 30 high school teams competing, 16 are Florida teams co- sponsored by NASA and KSC contractors. Local high schools participating are Astronaut, Bayside, Cocoa Beach, Eau Gallie, Melbourne, Melbourne Central Catholic, Palm Bay, Rockledge, Satellite, and Titusville.

Team 278 gets help from KSC machine shop

NASA Technical Reports Server (NTRS)

2000-01-01

The Hero Team (278) robot, named Hero, is repaired in a Kennedy Space Center research and development machine shop. The team of Edgewater High School students was co-sponsored by NASA Kennedy Space Center and Honeywell. Students from all over the country are at the KSC Visitor Complex for the FIRST (For Inspiration and Recognition of Science and Technology) Southeast Regional competition March 9-11 in the Rocket Garden. Teams of high school students are testing the limits of their imagination using robots they have designed, with the support of business and engineering professionals and corporate sponsors, to compete in a technological battle against other schools' robots. Of the 30 high school teams competing, 16 are Florida teams co-sponsored by NASA and KSC contractors. Local high schools participating are Astronaut, Bayside, Cocoa Beach, Eau Gallie, Melbourne, Melbourne Central Catholic, Palm Bay, Rockledge, Satellite, and Titusville.

Fabrication Division Staff in the Machine Shop

NASA Image and Video Library

1946-07-21

Machine Shop technicians in the Technical Service Building at the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory. The 260-person Fabrication Division, led by Dan White and John Dalgleish, created almost all of the equipment and models used at the laboratory. The Technical Services Building, referred to as the Fab Shop, contained a number of specialized shops in the 1940s and 1950s. These included a Machine Shop, Sheet Metal Shop, Wood and Pattern Shop, Instrument Shop, Thermocouple Shop, Heat Treating Shop, Metallurgical Laboratory, and Fabrication Office. The Machine Shop fabricated specialized research equipment not commercially available. During World War II these technicians produced high-speed cameras for combustion research, impellers and other supercharger components, and key equipment for the lab’s first supersonic wind tunnel. The Wood and Pattern Shop created everything from control panels and cabinets to aircraft model molds for sheet metal work. The Sheet Metal Shop had the ability to work with 0.01 to 4-inch thick steel plates. The Instrument Shop specialized in miniature parts and instrumentation, while the Thermocouple Shop standardized the installation of pitot tubes and thermocouples.

Bidding-based autonomous process planning and scheduling

NASA Astrophysics Data System (ADS)

Gu, Peihua; Balasubramanian, Sivaram; Norrie, Douglas H.

1995-08-01

Improving productivity through computer integrated manufacturing systems (CIMS) and concurrent engineering requires that the islands of automation in an enterprise be completely integrated. The first step in this direction is to integrate design, process planning, and scheduling. This can be achieved through a bidding-based process planning approach. The product is represented in a STEP model with detailed design and administrative information including design specifications, batch size, and due dates. Upon arrival at the manufacturing facility, the product registered in the shop floor manager which is essentially a coordinating agent. The shop floor manager broadcasts the product's requirements to the machines. The shop contains autonomous machines that have knowledge about their functionality, capabilities, tooling, and schedule. Each machine has its own process planner and responds to the product's request in a different way that is consistent with its capabilities and capacities. When more than one machine offers certain process(es) for the same requirements, they enter into negotiation. Based on processing time, due date, and cost, one of the machines wins the contract. The successful machine updates its schedule and advises the product to request raw material for processing. The concept was implemented using a multi-agent system with the task decomposition and planning achieved through contract nets. The examples are included to illustrate the approach.

76 FR 82103 - Airworthiness Directives; General Electric Company (GE) GE90-110B1 and GE90-115B Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-30

... of small pieces from the HPC stages 1-2 seal teeth and two shop findings of cracks in the seal teeth... stages 1-2 seal teeth of the HPC stages 2-5 spool for cracks. This AD only allows installation of either HPC stator stage 1 interstage seals that are pregrooved or previously worn seals with acceptable wear...

A&M. Grading and drainage plan. Shows natural ground elevation of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. Grading and drainage plan. Shows natural ground elevation of the (presumed) dry lake-bed shore and berm shielding the administrative area from the hot shop area. Ralph M. Parsons 902-2&3-ANP-U 4. Date: December 1953. Approved by INEEL Classification Office for public release. INEEL code no. 032-0000-00-693-106691 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

USSR Report, Political and Sociological Affairs

DTIC Science & Technology

1985-11-05

gratifying that you at your accountability and election meeting have concerned yourselves both with the affairs of the shop and of the entire plant...demanding approach at meetings in party groups. You rightly emphasized that we cannot tolerate that a part of workers, engineering and...businesslike discussion and it disclosed that you did not hide weak aspects in the work of the party group and the entire lathe section. Such a party

LOFT complex, aerial view taken on same on same day ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

LOFT complex, aerial view taken on same on same day as HAER photo ID-33-E-376. Camera facing south. Note curve of rail track toward hot shop (TAN-607). Earth shielding on control building (TAN-630) is partly removed, showing edge of concrete structure. Great southern butte on horizon. Date: 1975. INEEL negative no. 75-3693 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

AUTOMOTIVE REPAIR SHOP, INTERIOR VIEW TO SOUTHEAST, DOORWAYS TO SHOP ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

AUTOMOTIVE REPAIR SHOP, INTERIOR VIEW TO SOUTHEAST, DOORWAYS TO SHOP OFFICE AND SOUTH WING. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

Eyes wide shopped: shopping situations trigger arousal in impulsive buyers.

PubMed

Serfas, Benjamin G; Büttner, Oliver B; Florack, Arnd

2014-01-01

The present study proposes arousal as an important mechanism driving buying impulsiveness. We examined the effect of buying impulsiveness on arousal in non-shopping and shopping contexts. In an eye-tracking experiment, we measured pupil dilation while participants viewed and rated pictures of shopping scenes and non-shopping scenes. The results demonstrated that buying impulsiveness is closely associated with arousal as response to viewing pictures of shopping scenes. This pertained for hedonic shopping situations as well as for utilitarian shopping situations. Importantly, the effect did not emerge for non-shopping scenes. Furthermore, we demonstrated that arousal of impulsive buyers is independent from cognitive evaluation of scenes in the pictures.

AUTOMOTIVE REPAIR SHOP, INTERIOR VIEW TO SOUTHEAST, DOORWAYS TO SHOP ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

AUTOMOTIVE REPAIR SHOP, INTERIOR VIEW TO SOUTHEAST, DOORWAYS TO SHOP OFFICE AND SOUTH WING, WITH SCALE. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

Distance Teaching of Environmental Engineering Courses at the Open University.

ERIC Educational Resources Information Center

Porteous, Andrew; Nesaratnam, Suresh T.; Anderson, Judith

1997-01-01

Describes two integrated distance learning environmental engineering degree courses offered by the environmental engineering group of the Open University in Great Britain. Discusses admission requirements for courses, advantages offered by distance learning, professional accreditation, site visits, and tutors. (AIM)

Cohort study investigating the effects of first stage of the English tobacco point-of-sale display ban on awareness, susceptibility and smoking uptake among adolescents

PubMed Central

Bogdanovica, Ilze; McNeill, Ann; Britton, John

2017-01-01

Objective A prospective evaluation of the effect of 2012 point-of-sale (PoS) display ban in supermarkets in England on perceived exposure to PoS displays, and on changes in susceptibility and smoking uptake among young people. Design Cohort study. Settings Seven schools in Nottinghamshire, England. Participants 1035 11–16-year-old school children. Primary and secondary outcome measures Changes in reported exposure to PoS displays before and after prohibition, and the association between exposure to and awareness of PoS displays and change in susceptibility to smoking and smoking status between 2011 and 2012 (before the ban) and 2012 and 2013 (after the ban). Results The proportion of children noticing tobacco PoS displays in supermarkets most or every time they visited a shop changed little between 2011 and 2012 (59.6% (95% CI 56.6% to 62.6%) and 58.8% (95% CI 55.8% to 61.8%), respectively); but decreased by about 13 percentage points to 45.7% (95% CI 42.7% to 48.7%) in 2013, after the ban. However, after adjusting for confounders, implementation of the first stage of the PoS ban in 2012 did not result in significant changes in the relation between susceptibility to smoking and smoking status and exposure to and awareness of PoS displays. Conclusions Prohibition of PoS in large supermarkets resulted in a decline in the proportion of young people noticing PoS displays in large shops, but little or no change in smoking uptake or susceptibility. It remains to be seen whether extension of the PoS ban to all shops in 2015 has a more marked effect. PMID:28115330

Structural investigation of websites of selected educational hospitals of Shiraz University of Medical Sciences from Patient Relationship Management (PRM) perspective

PubMed Central

Bakhshi, Mahdieh; Monem, Hossein; Barati, Omid; Sharifian, Roxana; Nematollahi, Mohtaram

2017-01-01

Background Hospital websites are considered as an appropriate system for exchanging information and establishing communication between patients, hospitals, and medical staff. Website character, website contact interactivity, shopping convenience, as well as care and service are the factors that the present study investigated as far as the patient relationship management is concerned. Methods This descriptive-analytical study was conducted on 206 patients visiting Shahid Faghihi and Ali Asghar Hospitals in Shiraz, which were capable of offering electronic services. The data collection tool was a researcher-made questionnaire based on the Mekkamol model and other similar studies, as well as investigations into the websites of the world’s top hospitals. The questionnaire’s validity was approved by a committee of experts and its reliability was approved based on a 54-patient sample with a Cronbach’s alpha of 0.94. The data were analyzed using the Structural Equation Modeling (SEM) with partial least squares (PLS) approach and by utilizing SPSS and Smart-PLS V2 software programs. Results The results showed that there are significant relationships between “website character” and “website contact interactivity” (p=0.00), between “shopping convenience” and “website contact interactivity” (p=0.00), and between “website contact interactivity” and “care and service” (p=0.00). Conclusion Website design with such characteristics as website simplicity, shopping convenience, authenticity of information, and provision of such services as admission, scheduling appointments, and electronic payment of bills will result in interaction and communication between patients and hospital websites. This will, for its turn, pave the way for attracting more patients. PMID:28894536

2. VIEW SOUTHWESTNORTH ELEVATION OF BOILER SHOP SECTION OF THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. VIEW SOUTHWEST-NORTH ELEVATION OF BOILER SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

6. VIEW WESTINTERIOR OF BOILER SHOP SECTION OF THE BETHLEHEM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. VIEW WEST-INTERIOR OF BOILER SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

7. VIEW EASTINTERIOR OF BOILER SHOP SECTION OF THE BETHLEHEM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. VIEW EAST-INTERIOR OF BOILER SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

8. VIEW EASTINTERIOR OF BLACKSMITH SHOP SECTION OF THE BETHLEM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. VIEW EAST-INTERIOR OF BLACKSMITH SHOP SECTION OF THE BETHLEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

9. VIEW WESTINTERIOR OF BLACKSMITH SHOP SECTION OF THE BETHLEHEM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. VIEW WEST-INTERIOR OF BLACKSMITH SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

3. VIEW SOUTHNORTH ELEVATION OF BLACKSMITH SHOP SECTION OF THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. VIEW SOUTH-NORTH ELEVATION OF BLACKSMITH SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

13. Interior detail, Blacksmith Shop, showing a portion of the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. Interior detail, Blacksmith Shop, showing a portion of the original overhead belt drive system that powered machine tools in the adjacent Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to west, 135mm lens. - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

5. VIEW EASTOPENING IN WEST ELEVATION OF BLACKSMITH SHOP SECTION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. VIEW EAST-OPENING IN WEST ELEVATION OF BLACKSMITH SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

Eyes Wide Shopped: Shopping Situations Trigger Arousal in Impulsive Buyers

PubMed Central

Serfas, Benjamin G.; Büttner, Oliver B.; Florack, Arnd

2014-01-01

The present study proposes arousal as an important mechanism driving buying impulsiveness. We examined the effect of buying impulsiveness on arousal in non-shopping and shopping contexts. In an eye-tracking experiment, we measured pupil dilation while participants viewed and rated pictures of shopping scenes and non-shopping scenes. The results demonstrated that buying impulsiveness is closely associated with arousal as response to viewing pictures of shopping scenes. This pertained for hedonic shopping situations as well as for utilitarian shopping situations. Importantly, the effect did not emerge for non-shopping scenes. Furthermore, we demonstrated that arousal of impulsive buyers is independent from cognitive evaluation of scenes in the pictures. PMID:25489955

RIGGERS LOFT/PAINT SHOP/SHEET METAL SHOP, VIEW TO SOUTHEAST. THE PAINT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

RIGGERS LOFT/PAINT SHOP/SHEET METAL SHOP, VIEW TO SOUTHEAST. THE PAINT SHOP WAS LOCATED IN THE CLOSEST CORNER OF THE BUILDING. THE SHEET METAL SHOP WAS LOCATED IN THE CORNER OF THE BUILDING ON THE RIGHT. THE RIGGERS LOFT WAS LOCATED IN THE PORTION OF THE BUILDING OUT OF VIEW TO THE LEFT - Rosie the Riveter National Historical Park, Riggers Loft/Paint Shop/Sheet Metal Shop, 1322 Canal Boulevard, Richmond, Contra Costa County, CA

Impeller Creation at the Fabrication Shop

NASA Image and Video Library

1950-10-21

A mechanic and apprentice work on a wooden impeller in the Fabrication Shop at the NACA Lewis Flight Propulsion Laboratory. The 260-person Fabrication Division created almost all of the equipment and models used at the laboratory. The Technical Services Building, referred to as the “Fab Shop”, contained a number of specialized shops in the 1940s and 1950s. These included a Machine Shop, Sheet Metal Shop, Wood and Pattern Shop, Instrument Shop, Thermocouple Shop, Heat Treating Shop, Metallurgical Laboratory, and Fabrication Office. The Machine Shop fabricated research equipment not commercially available. During World War II these technicians produced high-speed cameras for combustion research, impellers and other supercharger components, and key equipment for the lab’s first supersonic wind tunnel. The Wood and Pattern Shop created everything from control panels and cabinets to aircraft model molds for sheet metal work. The Sheet Metal Shop had the ability to work with 0.01 to 4-inches thick steel plates. The Instrument Shop specialized in miniature parts and instrumentation, while the Thermocouple Shop standardized the installation of pitot tubes and thermocouples. The Metallurgical Laboratory contained a control lab for the Heat Treating Shop and a service lab for the NACA Lewis research divisions. The Heat Treating Shop heated metal parts to optimize their physical properties and contained a Precision Castings Foundry to manufacture equipment made of heat resisting alloys.

KSC-2009-5452

NASA Image and Video Library

2009-10-15

CAPE CANAVERAL, Fla. – At the Receipt Inspection Shop on Cape Canaveral Air Force Station in Florida, an ATK Space Systems' 60-inch graphite epoxy motor, or GEM, slated for launch of the GOES-P spacecraft is lifted from the tractor-trailer in which it was delivered. The two GEMs in the foreground were delivered previously to support another mission. The United Launch Alliance Delta IV is the launch vehicle for GOES-P, the latest Geostationary Operational Environmental Satellite developed by NASA for the National Oceanic and Atmospheric Administration, or NOAA. Launch is targeted for March 4, 2010, from Launch Complex 37. For information on GOES-P, visit http://nasascience.nasa.gov/missions/goes-n-o-p. Photo credit: NASA/Dimitri Gerondidakis

1. GENERAL PERSPECTIVE VIEW FACING WEST SHOWING ERECTING SHOP ON ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. GENERAL PERSPECTIVE VIEW FACING WEST SHOWING ERECTING SHOP ON RIGHT, FOLLOWED BY THE MACHINE SHOP NO. 1, STOREHOUSE, AND MACHINE SHOP NO. 2 - Juniata Shops, Erecting Shop, East of Fourth Avenue at Third Street, Altoona, Blair County, PA

18. Interior detail, drill press and grinder, Machine Shop, Roundhouse ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. Interior detail, drill press and grinder, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to east (135mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

19. Interior detail, grinder and drill press, Machine Shop, Roundhouse ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

19. Interior detail, grinder and drill press, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to south (135mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

STS-128 crew visits Stennis

NASA Technical Reports Server (NTRS)

2009-01-01

Astronauts C.J. Sturckow (seated, left) and Pat Forrester (seated, right) sign autographs during their Oct. 7 visit to Stennis Space Center. The astronauts visited the rocket engine testing facility to thank Stennis employees for contributions to their recent STS-128 space shuttle mission. All three of the main engines used on the mission were tested at Stennis. Sturckow served as commander for the STS-128 flight; Forrester was a mission specialist. During a 14-day mission aboard space shuttle discovery, the STS-128 crew delivered equipment and supplies to the International Space Station, including science and storage racks, a freezer to store research samples, a new sleeping compartment and an exercise treadmill. The mission featured three spacewalks to replace experiments and install new equipment at the space station.

Heat Treat Shop in the Technical Services Building

NASA Image and Video Library

1948-01-21

A technician prepares a metal component for a high-temperature bake in the Heat Treatment Shop at the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory. Fabrication Division under Dan White and John Dalgleish created almost all of the equipment and models used at the laboratory. The Technical Services Building, referred to as the Fab Shop, contained a number of specialized shops in the 1940s and 1950s. These included a Machine Shop, Sheet Metal Shop, Wood and Pattern Shop, Instrument Shop, Thermocouple Shop, Heat Treating Shop, Metallurgical Laboratory, and Fabrication Office. The Metallurgical Laboratory contained a control lab for the Heat Treating Shop and a service lab for the NACA Lewis research divisions. This metallurgical group performed tensile and impact tests on metals to determine their suitability for specific research or equipment. The Heat Treating Shop heated metal parts to optimize their physical properties and contained a Precision Castings Foundry to manufacture equipment made of heat resisting alloys.

Air Force Officers Visit Aircraft Engine Research Laboratory

NASA Image and Video Library

1945-08-21

A group of 60 Army Air Forces officers visited the National Advisory Committee for Aeronautics (NACA) Aircraft Engine Research Laboratory on August 27, 1945. The laboratory enacted strict security regulations throughout World War II. During the final months of the war, however, the NACA began opening its doors to groups of writers, servicemen, and aviation industry leaders. These events were the first exposure of the new engine laboratory to the outside world. Grandstands were built alongside the Altitude Wind Tunnel specifically for group photographs. George Lewis, Raymond Sharp, and Addison Rothrock (right to left) addressed this group of officers in the Administration Building auditorium. Lewis was the NACA’s Director of Aeronautical Research, Sharp was the lab’s manager, and Rothrock was the lab’s chief of research. Abe Silverstein, Jesse Hall and others watch from the rear of the room. The group toured several facilities after the talks, including the Altitude Wind Tunnel and a new small supersonic wind tunnel. The visit concluded with a NACA versus Army baseball game and cookout.

An Expert System Solution for the Quantitative Condition Assessment of Electrical Distribution Systems in the United States Air Force

DTIC Science & Technology

1991-09-01

Distribution system ... ......... 4 2. Architechture of an Expert system .. .............. 66 vi List of Tables Table Page 1. Prototype Component Model...expert system to properly process work requests Ln civil engineering (8:23). Electric Power Research Institute (EPRI). EPRI is a private organization ...used (51) Training Level. The level of training shop technicians receive, and the resulting proficiency, are important in all organizations . Experts 1

Design for Production Manual. Volume 2. Design/Production Integration

DTIC Science & Technology

1985-12-01

woodworking equipment such as circular saw, cross cut saw, planer / thicknesser and sander. There is considerable use of hand tools in the shop. Joinery inclucies...PROGRAM BY SOCIETY OF NAVAL ARCHITECTS AND MARINE ENGINEERS SHIP PRODUCTION COMMITTEE PANEL SP- 4 DESIGN PRODUCTION INTEGRATION CONTRACT DTMA91-82-C...DEC 1985 2. REPORT TYPE N/A 3. DATES COVERED - 4 . TITLE AND SUBTITLE Design for Production Manual Volume 2 of 3 Design/Production

46. ARAI. Aerial view of ARAI buildings as they looked ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

46. ARA-I. Aerial view of ARA-I buildings as they looked in 1981. From left to right, buildings are tank (ARA-727), contaminated waste storage tank (ARA-629), trailer, hot cell building (ARA-626), fuel oil storage tank (ARA-728), guard house (ARA-628), shop and maintenance building (ARA-627), and two trailers. Ineel photo no. 81-297. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

Iran: Profile and Statements of President Mahmoud Ahmadinejad

DTIC Science & Technology

2007-04-25

running a grocery store and then a barber shop in Aradan, became a blacksmith in Tehran. Ahmadinejad holds a Ph.D. in traffic and transport engineering...The sanctions were imposed by the U.N. Security Council after Iran refused to halt uranium enrichment in order to appease Western concerns about its...agreement that includes a deal that sees the two countries developing an international oil company. Ahmedinejad also met the newly elected Nicaraguan

29 CFR 779.320 - Partial list of establishments whose sales or service may be recognized as retail.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... Antique shops. Auto courts. Automobile dealers' establishments. Automobile laundries. Automobile repair shops. Barber shops. Beauty shops. Bicycle shops. Billiard parlors. Book stores. Bowling alleys. Butcher shops. Cafeterias. Cemeteries. China, glassware stores. Cigar stores. Clothing stores. Coal yards...

29 CFR 779.320 - Partial list of establishments whose sales or service may be recognized as retail.

Code of Federal Regulations, 2011 CFR

2011-07-01

.... Antique shops. Auto courts. Automobile dealers' establishments. Automobile laundries. Automobile repair shops. Barber shops. Beauty shops. Bicycle shops. Billiard parlors. Book stores. Bowling alleys. Butcher shops. Cafeterias. Cemeteries. China, glassware stores. Cigar stores. Clothing stores. Coal yards...

29 CFR 779.320 - Partial list of establishments whose sales or service may be recognized as retail.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... Antique shops. Auto courts. Automobile dealers' establishments. Automobile laundries. Automobile repair shops. Barber shops. Beauty shops. Bicycle shops. Billiard parlors. Book stores. Bowling alleys. Butcher shops. Cafeterias. Cemeteries. China, glassware stores. Cigar stores. Clothing stores. Coal yards...

29 CFR 779.320 - Partial list of establishments whose sales or service may be recognized as retail.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... Antique shops. Auto courts. Automobile dealers' establishments. Automobile laundries. Automobile repair shops. Barber shops. Beauty shops. Bicycle shops. Billiard parlors. Book stores. Bowling alleys. Butcher shops. Cafeterias. Cemeteries. China, glassware stores. Cigar stores. Clothing stores. Coal yards...

29 CFR 779.320 - Partial list of establishments whose sales or service may be recognized as retail.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... Antique shops. Auto courts. Automobile dealers' establishments. Automobile laundries. Automobile repair shops. Barber shops. Beauty shops. Bicycle shops. Billiard parlors. Book stores. Bowling alleys. Butcher shops. Cafeterias. Cemeteries. China, glassware stores. Cigar stores. Clothing stores. Coal yards...

Students' Understanding of the Special Theory of Relativity and Design for a Guided Visit to a Science Museum

ERIC Educational Resources Information Center

Guisasola, Jenaro; Solbes, Jordi; Barragues, Jose-Ignacio; Morentin, Maite; Moreno, Antonio

2009-01-01

The present paper describes the design of teaching materials that are used as learning tools in school visits to a science museum. An exhibition on "A century of the Special Theory of Relativity", in the Kutxaespacio Science Museum, in San Sebastian, Spain, was used to design a visit for first-year engineering students at the university…

Space Operations Learning Center Facebook Application

NASA Technical Reports Server (NTRS)

Lui, Ben; Milner, Barbara; Binebrink, Dan; Kuok, Heng

2012-01-01

The proposed Space Operations Learning Center (SOLC) Facebook module, initially code-named Spaceville, is intended to be an educational online game utilizing the latest social networking technology to reach a broad audience base and inspire young audiences to be interested in math, science, and engineering. Spaceville will be a Facebook application/ game with the goal of combining learning with a fun game and social environment. The mission of the game is to build a scientific outpost on the Moon or Mars and expand the colony. Game activities include collecting resources, trading resources, completing simple science experiments, and building architectures such as laboratories, habitats, greenhouses, machine shops, etc. The player is awarded with points and achievement levels. The player s ability increases as his/her points and levels increase. A player can interact with other players using multiplayer Facebook functionality. As a result, a player can discover unexpected treasures through scientific missions, engineering, and working with others. The player creates his/her own avatar with his/her selection of its unique appearance, and names the character. The player controls the avatar to perform activities such as collecting oxygen molecules or building a habitat. From observations of other successful social online games such as Farmville and Restaurant City, a common element of these games is having eye-catching and cartoonish characters, and interesting animations for all activities. This will create a fun, educational, and rewarding environment. The player needs to accumulate points in order to be awarded special items needed for advancing to higher levels. Trophies will be awarded to the player when certain goals are reached or tasks are completed. In order to acquire some special items needed for advancement in the game, the player will need to visit his/her neighboring towns to discover the items. This is the social aspect of the game that requires the player to go out of his/her own establishment to explore what is in the neighborhood. Spaceville will take advantage of Facebook s successful architecture to inspire a new audience of scientists and engineers for the future.

Employee and customer handling of nicotine-containing e-liquids in vape shops.

PubMed

Garcia, Robert; Allem, Jon Patrick; Baezconde-Garbanati, Lourdes; Unger, Jennifer Beth; Sussman, Steve

2016-01-01

Vape shops sell electronic cigarettes and related products such as e-liquids, which may contain nicotine. Direct contact with nicotine can lead to adverse health effects, and few regulations exist on how nicotine is handled in vape shops. This study examined how customers and employees come into contact with, and handle, nicotine-containing e-liquids in vape shops with the goal of informing potential future regulation of nicotine handling in vape shops. Data were collected from 77 vape shops in the Los Angeles basin. Characteristics of the shops were documented by employee interviews and in store observations. Data collection was focused on shops located in areas with high concentrations of communities of interest; 20 shops from African-American communities, 17 from Hispanic communities, 18 from Korean communities, and 22 from non-Hispanic White communities. Half of the vape shops allowed customers to sample e-liquids with nicotine. Most of the shops (83%) provided self-service sampling stations for customers. A majority of shop employees (72%) reported that spills of e-liquids containing nicotine had occurred in the past. While 64% of the shops provided safety equipment, only 34% provided equipment for proper nicotine handling. Furthermore, 62% of shop employees reported handling nicotine without gloves or other safety equipment. Regulation on the handling of nicotine by customers and vape shop employees is important to prevent unsafe practices and subsequent injury. The frequent occurrence of spills and limited availability of safety equipment in vape shops highlights the need for the creation and enforcement of regulations to protect employees and customers. Appropriate safety training and equipment should be provided to employees to prevent accidental exposure to nicotine. Information on ways to safely handle nicotine should be communicated to vape shop employees and customers.

Employee and customer handling of nicotine-containing e-liquids in vape shops

PubMed Central

Garcia, Robert; Allem, Jon Patrick; Baezconde-Garbanati, Lourdes; Unger, Jennifer Beth; Sussman, Steve

2017-01-01

INTRODUCTION Vape shops sell electronic cigarettes and related products such as e-liquids, which may contain nicotine. Direct contact with nicotine can lead to adverse health effects, and few regulations exist on how nicotine is handled in vape shops. This study examined how customers and employees come into contact with, and handle, nicotine-containing e-liquids in vape shops with the goal of informing potential future regulation of nicotine handling in vape shops. METHODS Data were collected from 77 vape shops in the Los Angeles basin. Characteristics of the shops were documented by employee interviews and in store observations. Data collection was focused on shops located in areas with high concentrations of communities of interest; 20 shops from African-American communities, 17 from Hispanic communities, 18 from Korean communities, and 22 from non-Hispanic White communities. RESULTS Half of the vape shops allowed customers to sample e-liquids with nicotine. Most of the shops (83%) provided self-service sampling stations for customers. A majority of shop employees (72%) reported that spills of e-liquids containing nicotine had occurred in the past. While 64% of the shops provided safety equipment, only 34% provided equipment for proper nicotine handling. Furthermore, 62% of shop employees reported handling nicotine without gloves or other safety equipment. CONCLUSIONS Regulation on the handling of nicotine by customers and vape shop employees is important to prevent unsafe practices and subsequent injury. The frequent occurrence of spills and limited availability of safety equipment in vape shops highlights the need for the creation and enforcement of regulations to protect employees and customers. Appropriate safety training and equipment should be provided to employees to prevent accidental exposure to nicotine. Information on ways to safely handle nicotine should be communicated to vape shop employees and customers. PMID:28660255

International use of an academic nephrology World Wide Web site: from medical information resource to business tool.

PubMed

Abbott, Kevin C; Oliver, David K; Boal, Thomas R; Gadiyak, Grigorii; Boocks, Carl; Yuan, Christina M; Welch, Paul G; Poropatich, Ronald K

2002-04-01

Studies of the use of the World Wide Web to obtain medical knowledge have largely focused on patients. In particular, neither the international use of academic nephrology World Wide Web sites (websites) as primary information sources nor the use of search engines (and search strategies) to obtain medical information have been described. Visits ("hits") to the Walter Reed Army Medical Center (WRAMC) Nephrology Service website from April 30, 2000, to March 14, 2001, were analyzed for the location of originating source using Webtrends, and search engines (Google, Lycos, etc.) were analyzed manually for search strategies used. From April 30, 2000 to March 14, 2001, the WRAMC Nephrology Service website received 1,007,103 hits and 12,175 visits. These visits were from 33 different countries, and the most frequent regions were Western Europe, Asia, Australia, the Middle East, Pacific Islands, and South America. The most frequent organization using the site was the military Internet system, followed by America Online and automated search programs of online search engines, most commonly Google. The online lecture series was the most frequently visited section of the website. Search strategies used in search engines were extremely technical. The use of "robots" by standard Internet search engines to locate websites, which may be blocked by mandatory registration, has allowed users worldwide to access the WRAMC Nephrology Service website to answer very technical questions. This suggests that it is being used as an alternative to other primary sources of medical information and that the use of mandatory registration may hinder users from finding valuable sites. With current Internet technology, even a single service can become a worldwide information resource without sacrificing its primary customers.

Factors associated with the perpetration of sexual violence among wine-shop patrons in Chennai, India

PubMed Central

Go, Vivian F.; Srikrishnan, Aylur K.; Salter, Megan L.; Mehta, Shruti; Johnson, Sethulakshmi C.; Sivaram, Sudha; Davis, Wendy; Solomon, Suniti; Celentano, David D.

2010-01-01

With an estimated 2.5 million people living with HIV/AIDS, India has the third highest number of HIV-infected people in the world. Despite reductions in prevalence among the general population, the percentage of all infections occurring among Indian women is continuing to rise. Women s risk of HIV infection from their partner and observed associations between sexual violence and HIV infection in India underscore the importance of understanding determinants of forced sex. A probability survey was conducted from June 2003 to August 2007 in Chennai, India among alcohol venue (“wine shops”) patrons to estimate the prevalence of sexual violence and to identify risk factors associated with perpetrating forced sex. Among 1499 men, 28.5% reported forced sex with at least one partner in the past 3 months. In multivariate analysis, earning income for less than 12 months a year, visiting the wine shop with friends, STD symptoms, perpetration of physical violence, and number of sexual partners were statistically significantly associated with perpetrating forced sex. Men who reported having 3 or more close friends were less likely to perpetrate violence. HIV interventions that facilitate formal groups that foster positive social support and address a range of HIV risk behaviors including sexually and physically abusive behaviors are recommended to reduce sexual violence. PMID:20692757

The Effect of the Social and Physical Environment on Children's Independent Mobility to Neighborhood Destinations.

PubMed

Christian, Hayley E; Klinker, Charlotte D; Villanueva, Karen; Knuiman, Matthew W; Foster, Sarah A; Zubrick, Stephan R; Divitini, Mark; Wood, Lisa; Giles-Corti, Billie

2015-06-16

Relationships between context-specific measures of the physical and social environment and children's independent mobility to neighborhood destination types were examined. Parents in RESIDE's fourth survey reported whether their child (8-15 years; n = 181) was allowed to travel without an adult to school, friend's house, park and local shop. Objective physical environment measures were matched to each of these destinations. Social environment measures included neighborhood perceptions and items specific to local independent mobility. Independent mobility to local destinations ranged from 30% to 48%. Independent mobility to a local park was less likely as the distance to the closest park (small and large size) increased and less likely with additional school grounds (P < .05). Independent mobility to school was less likely as the distance to the closest large park increased and if the neighborhood was perceived as unsafe (P < .05). Independent mobility to a park or shops decreased if parenting social norms were unsupportive of children's local independent movement (P < .05). Independent mobility appears dependent upon the specific destination being visited and the impact of neighborhood features varies according to the destination examined. Findings highlight the importance of access to different types and sizes of urban green space for children's independent mobility to parks.

ERECTING/MACHINE SHOP, CRANE ACCESS GANGWAY BETWEEN ERECTING (L) AND MACHINE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ERECTING/MACHINE SHOP, CRANE ACCESS GANGWAY BETWEEN ERECTING (L) AND MACHINE (R) SHOPS, LOOKING NORTH. - Southern Pacific, Sacramento Shops, Erecting Shop, 111 I Street, Sacramento, Sacramento County, CA

45 CFR 155.705 - Functions of a SHOP.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Functions of a SHOP. 155.705 Section 155.705... Functions: Small Business Health Options Program (SHOP) § 155.705 Functions of a SHOP. (a) Exchange functions that apply to SHOP. The SHOP must carry out all the required functions of an Exchange described in...

45 CFR 155.720 - Enrollment of employees into QHPs under SHOP.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Enrollment of employees into QHPs under SHOP. 155... ACT Exchange Functions: Small Business Health Options Program (SHOP) § 155.720 Enrollment of employees into QHPs under SHOP. (a) General requirements. The SHOP must process the SHOP single employee...

MACHINE SHOP, WEST BAY, DETAIL OF COLUMN, BEAM, CRANE RAIL, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MACHINE SHOP, WEST BAY, DETAIL OF COLUMN, BEAM, CRANE RAIL, AND TRUSS CONNECTION TO ERECTING SHOP, LOOKING NORTHWEST. - Southern Pacific, Sacramento Shops, Erecting Shop, 111 I Street, Sacramento, Sacramento County, CA

Exposure to point‐of‐sale displays and changes in susceptibility to smoking: findings from a cohort study of school students

PubMed Central

Szatkowski, Lisa; McNeill, Ann; Spanopoulos, Dionysis; Britton, John

2015-01-01

Abstract Aims To investigate the association between frequency of visiting shops and noticing of tobacco point‐of‐sale (PoS) displays and the development of susceptibility to smoking, or smoking uptake, in secondary school students. Design Two surveys of a school based cohort study carried out in 2011 and 2012. Settings Nottinghamshire, UK. Participants A total of 2270 children aged 11–16 years from eight schools in Nottinghamshire. Measurements We investigated changes in susceptibility to smoking and smoking status in relation to frequency of visiting shops and noticing PoS displays and number of tobacco brands recognized, controlling for a range of potential confounders. Susceptibility to smoking was defined using a set of three questions covering intentions to try smoking, to smoke within the next year and likelihood of smoking if a best friend offered a cigarette. For the analysis we used multinomial logistic regression. Findings Among non‐susceptible never smokers, noticing PoS displays more frequently was associated independently with an increased risk of becoming susceptible to smoking [adjusted relative risk ratio (RRR) = 1.74; 99% confidence interval (CI) = 1.13–2.69], but was not associated with smoking uptake. Recognizing a higher number of brands among non‐susceptible never smokers doubled the risk of becoming susceptible to smoking and of becoming a smoker, but this did not have a significant effect on transition to smoking among susceptible never smokers. Frequency of noticing tobacco PoS displays was not associated significantly with smoking uptake among those who were susceptible never smokers at baseline. Conclusions Noticing tobacco point‐of‐sale displays more often and recognizing a higher number of tobacco brands is associated with an increased risk of becoming susceptible to smoking among adolescents in the United Kingdom, and recognizing a higher number of brands is associated positively with an increased risk of smoking uptake. PMID:25488727

Exposure to point-of-sale displays and changes in susceptibility to smoking: findings from a cohort study of school students.

PubMed

Bogdanovica, Ilze; Szatkowski, Lisa; McNeill, Ann; Spanopoulos, Dionysis; Britton, John

2015-04-01

To investigate the association between frequency of visiting shops and noticing of tobacco point-of-sale (PoS) displays and the development of susceptibility to smoking, or smoking uptake, in secondary school students. Two surveys of a school based cohort study carried out in 2011 and 2012. Nottinghamshire, UK. A total of 2270 children aged 11-16 years from eight schools in Nottinghamshire. We investigated changes in susceptibility to smoking and smoking status in relation to frequency of visiting shops and noticing PoS displays and number of tobacco brands recognized, controlling for a range of potential confounders. Susceptibility to smoking was defined using a set of three questions covering intentions to try smoking, to smoke within the next year and likelihood of smoking if a best friend offered a cigarette. For the analysis we used multinomial logistic regression. Among non-susceptible never smokers, noticing PoS displays more frequently was associated independently with an increased risk of becoming susceptible to smoking [adjusted relative risk ratio (RRR) = 1.74; 99% confidence interval (CI) = 1.13-2.69], but was not associated with smoking uptake. Recognizing a higher number of brands among non-susceptible never smokers doubled the risk of becoming susceptible to smoking and of becoming a smoker, but this did not have a significant effect on transition to smoking among susceptible never smokers. Frequency of noticing tobacco PoS displays was not associated significantly with smoking uptake among those who were susceptible never smokers at baseline. Noticing tobacco point-of-sale displays more often and recognizing a higher number of tobacco brands is associated with an increased risk of becoming susceptible to smoking among adolescents in the United Kingdom, and recognizing a higher number of brands is associated positively with an increased risk of smoking uptake. © 2014 Society for the Study of Addiction.

Footprint of Sandia's August 15 2016 Informal Idea Exploration Session on "Towards an Engineering and Applied Science of Research".

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsao, Jeffrey Y.; Fleming Lindsley, Elizabeth S.; Heffelfinger, Grant S.

On August 15, 2016, Sandia hosted a visit by Professor Venkatesh Narayanamurti. Prof Narayanamurti (Benjamin Peirce Research Professor of Technology and Public Policy at Harvard, Board Member of the Belfer Center for Science and International Affairs, former Dean of the School of Engineering and Applied Science at Harvard, former Dean of Engineering at UC Santa Barbara, and former Vice President of Division 1000 at Sandia). During the visit, a small, informal, all-day idea exploration session on "Towards an Engineering and Applied Science of Research" was conducted. This document is a brief synopsis or "footprint" of the presentations and discussions atmore » this Idea Exploration Session. The intent of this document is to stimulate further discussion about pathways Sandia can take to improve its Research practices.« less

West elevation of Machine Shop (Bldg. 163) north bay. Boiler ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

West elevation of Machine Shop (Bldg. 163) north bay. Boiler Shop (Bldg. 152) is at left - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Machine Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

20. MACHINE SHOP, LOOKING SOUTH. SHOP IS EQUIPPED WITH A ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. MACHINE SHOP, LOOKING SOUTH. SHOP IS EQUIPPED WITH A 25-TON SHAW CRANE TO HANDLE PARTS FROM RAIL CARS INTO THE SHOP. MACHINE SHOP HANDLES ALL NECESSARY REPAIR WORK ON THE DOCK MACHINERY. - Pennsylvania Railway Ore Dock, Lake Erie at Whiskey Island, approximately 1.5 miles west of Public Square, Cleveland, Cuyahoga County, OH

World Presidents Organization

NASA Technical Reports Server (NTRS)

2010-01-01

Members of the World Presidents' Organization enjoy a buffet luncheon during a Jan. 26 visit to NASA's John C. Stennis Space Center. WPO members from several states toured Stennis facilities during a daylong visit that included a river ride with Special Boat Team 22, the U.S. Navy's elite boat warriors group that trains at Stennis. Visiting president also had an opportunity to learn about the ongoing work of the nation's premier rocket engine testing site.

World Presidents Organization

NASA Image and Video Library

2010-01-26

Members of the World Presidents' Organization enjoy a buffet luncheon during a Jan. 26 visit to NASA's John C. Stennis Space Center. WPO members from several states toured Stennis facilities during a daylong visit that included a river ride with Special Boat Team 22, the U.S. Navy's elite boat warriors group that trains at Stennis. Visiting president also had an opportunity to learn about the ongoing work of the nation's premier rocket engine testing site.

5. Northwest elevation, Roundhouse Machine Shop Extension, Southern Pacific Railroad ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Northwest elevation, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to southeast (90mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

4. Southwest end, Roundhouse Machine Shop Extension, Southern Pacific Railroad ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. Southwest end, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to northeast (135mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

Looking northeast from roof of Machine Shop (Bldg. 163) at ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking northeast from roof of Machine Shop (Bldg. 163) at transfer table pit and Boiler Shop (Bldg. 152) - Atchison, Topeka, Santa Fe Railroad, Albuquerque Shops, Machine Shop, 908 Second Street, Southwest, Albuquerque, Bernalillo County, NM

21. VIEW OF AXLE AND WHEEL ASSEMBLY STORAGE AREA, adjacent ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. VIEW OF AXLE AND WHEEL ASSEMBLY STORAGE AREA, adjacent to Erecting Shop and Machine Shop. - Juniata Shops, Erecting Shop & Machine Shop, East of Fourth Avenue, between Fourth & Fifth Streets, Altoona, Blair County, PA

KSC-2012-2760

NASA Image and Video Library

2012-05-14

CAPE CANAVERAL, Fla. – Dr. LaNetra C. Tate, center, materials engineer at Kennedy Space Center, is surrounded by students as she welcomes them for their tour of the Space Life Sciences Lab facilities. The 26 honor students in chemistry and biology and their teachers got a chance to visit a number of high-tech labs at Kennedy as part of an effort to encourage students in the areas of science, technology, engineering and math. The tenth and eleventh grade students from Terry Parker High School in Jacksonville, Fla., visited a number of vastly different labs during their one-day tour. The group's visit to Kennedy was hosted by the Education Office as part of a nationwide effort by the National Lab Network to help introduce the nation's students to science careers. Photo credit: NASA/Jim Grossmann

STS-119 crew visit

NASA Image and Video Library

2009-05-05

Stennis Space Center Director Gene Goldman (r to l) presents a commemorative photo of a space shuttle main engine test firing to STS-119 Mission Commander Lee Archambault, Pilot Tony Antonelli and Mission Specialists Steve Swanson and Richard Arnold during the crew's May 5 visit to the facility.

15. Interior, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. Interior, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to northeast (90mm lens). The arched cutouts in the bottom chords of the roof trusses were necessary to provide clearance for the smokestacks of steam locomotives, and also mark the location of the former inspection pit in the floor (now filled in and covered by a new concrete floor). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

Modelling Electrical Energy Consumption in Automotive Paint Shop

NASA Astrophysics Data System (ADS)

Oktaviandri, Muchamad; Safiee, Aidil Shafiza Bin

2018-03-01

Industry players are seeking ways to reduce operational cost to sustain in a challenging economic trend. One key aspect is an energy cost reduction. However, implementing energy reduction strategy often struggle with obstructions, which slow down their realization and implementation. Discrete event simulation method is an approach actively discussed in current research trend to overcome such obstructions because of its flexibility and comprehensiveness. Meanwhile, in automotive industry, paint shop is considered the most energy consumer area which is reported consuming about 50%-70% of overall automotive plant consumption. Hence, this project aims at providing a tool to model and simulate energy consumption at paint shop area by conducting a case study at XYZ Company, one of the automotive companies located at Pekan, Pahang. The simulation model was developed using Tecnomatix Plant Simulation software version 13. From the simulation result, the model was accurately within ±5% for energy consumption and ±15% for maximum demand after validation with real system. Two different energy saving scenarios were tested. Scenario 1 was based on production scheduling approach under low demand situation which results energy saving up to 30% on the consumption. Meanwhile scenario 2 was based on substituting high power compressor with the lower power compressor. The results were energy consumption saving of approximately 1.42% and maximum demand reduction about 1.27%. This approach would help managers and engineers to justify worthiness of investment for implementing the reduction strategies.

Open Campus: Strategic Plan

DTIC Science & Technology

2016-05-01

The formal and informal interactions among scientists, engineers, and business and technology specialists fostered by this environment will lead...pathways for highly trained graduates of science, technology, engineering, and mathematics (STEM) academic programs, and help academic institutions...engineering and mathematics (STEM) disciplines relevant to ARL science and technology programs. Under EPAs, visiting students and professors

Marketing activities of vape shops across racial/ethnic communities.

PubMed

Garcίa, Robert; Sidhu, Anupreet; Allem, Jon-Patrick; Baezconde-Garbanati, Lourdes; Unger, Jennifer B; Sussman, Steve

2016-01-01

There has been a surge in the number of vape shops in the USA. Research on the marketing practices of e-cigarette manufacturers is scarce and even less known are the practices of vape shop retailers. Past research on tobacco marketing has shown differences in the amount and content of marketing material, based on a community's demographic profile. This study examined marketing strategies in vape shops and explored differences among vape shops located in communities that differ by ethnic composition. Data was gathered in 2014 from a pilot-study on vape shops (n=77) in Los Angeles, which documented the characteristics of shops through employee interviews and in-store observations. Data were collected from shops located in communities that were predominantly, African-American (n=20), Hispanic (n=17), Korean (n=18), or non-Hispanic White (n=22). Sixty-one percent of vape shops had advertisements (print ads and posters) for e-cigarettes and 84% offered discounts. Vape shops in Hispanic communities were more likely to have ethnic specific marketing material compared to shops in other communities. All the shops provided customers with free samples, however those in Korean and non-Hispanic White communities had a significantly higher prevalence of customer accessible free samples. Vape shop marketing practices differed by ethnic community. A large majority of shops provided free samples to their customers, a practice which is now banned by the FDA. It will be important to monitor how vape shops will adjust their marketing strategy because of this ban. Future research should expand on the findings presented here to provide regulators with further crucial information.

The Long Island Sound Dredged Material Containment Feasibility Study.

DTIC Science & Technology

1983-02-01

ancilliary businesses, such as sporting goods stores, dockside gasoline dealers, bait and tackle shops, and fast food services would also be negatively...to there is almost always some ex- tached or unable to move fast enough maintain the area’s importance as a change of nutrients and organisms to avoid...basis, authorized depth of 14 feet or less will no longer be maintained by the Corps of (4) Fast -tracking of navigation Engineers. Presently, only 7

2. Creosote plant site (NE side) as viewed from passenger ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. Creosote plant site (NE side) as viewed from passenger deck of Washington State Ferry as it approaches the Winslow landing. Remnants of Milwaukee Bock are visible on far left. Building at left is Office Engine Room Building with sloped roof is at center behind tanks. To the right is Boiler Building with stack. Long building is Machine Shop. Dock on right is West Dock. - Pacific Creosoting Plant, 5350 Creosote Place, Northeast, Bremerton, Kitsap County, WA

Wastewater and Hazardous Waste Survey, Homestead AFB Florida.

DTIC Science & Technology

1988-03-01

tank into the sanitary sewer. 16. Bilge waste from the Water Survival School is currently placed in 55-gallon drums and stored on site. At the time...plant. W0’I; • ,. =% . Fiue5. AGE Accumulation Site , 30 7. A disposal contract for waste bilge water is needed for the Water Survival School. Currently...eliminate all pesticide wastes from S this shop. 16. The Water Survival School can possibly eliminate bilge water waste by having Civil Engineering

Adobe Mining grows during tough times

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scott, F.E.

1983-05-01

This article describes how a mining company produces coal at its 10 surface operations 24 hrs. a day, 7 days a week, and runs its 3 preparation plants 24 hrs. a day, 5 days a week. In 1982 Adobe topped 2 million tons per year in coal production. A significant savings is realized because Adobe has its own shop to rebuild all major engines and power train components when necessary. Adobe origins and safety and reclamation are discussed.

6. NORTH END OF MACHINE SHOP. FORGE SHOP (HAER No. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. NORTH END OF MACHINE SHOP. FORGE SHOP (HAER No. CA-326-K) ON LEFT, FORD PLANT IN DISTANCE, NE BY 60. - Rosie the Riveter National Historical Park, Machine Shop, 1311 Canal Boulevard, Richmond, Contra Costa County, CA

Process improvement by cycle time reduction through Lean Methodology

NASA Astrophysics Data System (ADS)

Siva, R.; patan, Mahamed naveed khan; lakshmi pavan kumar, Mane; Purusothaman, M.; pitchai, S. Antony; Jegathish, Y.

2017-05-01

In present world, every customer needs their products to get on time with good quality. Presently every industry is striving to satisfy their customer requirements. An aviation concern trying to accomplish continuous improvement in all its projects. In this project the maintenance service for the customer is analyzed. The maintenance part service is split up into four levels. Out of it, three levels are done in service shops and the fourth level falls under customer’s privilege to change the parts in their aircraft engines at their location. An enhancement for electronics initial provisioning (eIP) is done for fourth level. Customers request service shops to get their requirements through Recommended Spare Parts List (RSPL) by eIP. To complete this RSPL for one customer, it takes 61.5 hours as a cycle time which is very high. By mapping current state VSM and takt time, future state improvement can be done in order to reduce cycle time using Lean tools such as Poke-Yoke, Jidoka, 5S, Muda etc.,

Opioid shopping behavior: how often, how soon, which drugs, and what payment method.

PubMed

Cepeda, M Soledad; Fife, Daniel; Chow, Wing; Mastrogiovanni, Gregory; Henderson, Scott C

2013-01-01

Doctor shopping (obtaining opioid prescriptions from multiple prescribers) is one example of opioid abuse and diversion. The authors assessed how soon shopping behavior was observed after opioid exposure, number of events per shopper, preferred opioids, and method of payment. This was a cohort study. Individuals with ≤1 dispensing for any opioid in 2008 were followed for 18 months. Shopping behavior was defined as ≤2 prescriptions by different prescribers with ≤1 day of overlap and filled at ≤3 pharmacies. Of 25,161,024 subjects, 0.30% exhibited shopping behavior. Opioid-experienced subjects were 13.7 times more likely to exhibit shopping behavior and had more shopping episodes than opioid-naive subjects. Time to first shopping event was 246.90 ± 163.61 days. Number of episodes was 2.74 ± 4.66. Most subjects with shopping behavior (55.27%) had 1 shopping episode, whereas 9.52% had ≤6 episodes; 88.99% had ≤4 prescribers. Subjects with shopping behavior filled schedule II opioids more often than subjects without shopping behavior (19.51% vs 10.89%) and more often paid in cash (44.85% vs 18.54%). Three of 1000 people exposed to opioids exhibit shopping behavior, on average, 8 months after exposure. Opioid shoppers seek strong opioids, avoid combination products, often pay cash, and obtain prescriptions from few prescribers. © 2012 The Author(s).

1. AERIAL VIEW OF SHOPS COMPLEX LOOKING EAST SHOWING WEST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. AERIAL VIEW OF SHOPS COMPLEX LOOKING EAST SHOWING WEST AND EAST ROUNDHOUSES, FROG AND SWITCH SHOP, AND MACHINE SHOP. - Baltimore & Ohio Railroad, Martinsburg Repair Shops, West Side of Tuscarora Creek Opposite East End of Race Street, Martinsburg, Berkeley County, WV

Technical and Occupational Shops. Volume II.

ERIC Educational Resources Information Center

Ontario Dept. of Education, Toronto. School Planning and Building Research Section.

The layouts and specifications provided are intended as a guide to school boards, educators, and architects. Drawings and room plans illustrate specifications for girls' occupational shop, graphic arts, carpentry (millwork and building construction shop), boys' occupational shop (mechanical), boys' occupational shop (building construction),…

Marketing activities of vape shops across racial/ethnic communities

PubMed Central

Garcίa, Robert; Sidhu, Anupreet; Allem, Jon-Patrick; Baezconde-Garbanati, Lourdes; Unger, Jennifer B.; Sussman, Steve

2017-01-01

INTRODUCTION There has been a surge in the number of vape shops in the USA. Research on the marketing practices of e-cigarette manufacturers is scarce and even less known are the practices of vape shop retailers. Past research on tobacco marketing has shown differences in the amount and content of marketing material, based on a community’s demographic profile. This study examined marketing strategies in vape shops and explored differences among vape shops located in communities that differ by ethnic composition. METHODS Data was gathered in 2014 from a pilot-study on vape shops (n=77) in Los Angeles, which documented the characteristics of shops through employee interviews and in-store observations. Data were collected from shops located in communities that were predominantly, African-American (n=20), Hispanic (n=17), Korean (n=18), or non-Hispanic White (n=22). RESULTS Sixty-one percent of vape shops had advertisements (print ads and posters) for e-cigarettes and 84% offered discounts. Vape shops in Hispanic communities were more likely to have ethnic specific marketing material compared to shops in other communities. All the shops provided customers with free samples, however those in Korean and non-Hispanic White communities had a significantly higher prevalence of customer accessible free samples. CONCLUSIONS Vape shop marketing practices differed by ethnic community. A large majority of shops provided free samples to their customers, a practice which is now banned by the FDA. It will be important to monitor how vape shops will adjust their marketing strategy because of this ban. Future research should expand on the findings presented here to provide regulators with further crucial information. PMID:29046899

Comparison of the risks of shopping behavior and opioid abuse between tapentadol and oxycodone and association of shopping behavior and opioid abuse.

PubMed

Cepeda, M Soledad; Fife, Daniel; Kihm, Mary A; Mastrogiovanni, Greg; Yuan, Yingli

2014-12-01

This study compared the risks of opioid shopping behavior and opioid abuse between tapentadol immediate release and oxycodone immediate release and, to validate the definition of shopping, examined the association between opioid shopping and opioid abuse further. This retrospective cohort study using linked dispensing and diagnosis databases followed opioid-naive patients for development of shopping behavior and/or opioid abuse during 1 year after initial exposure to tapentadol or oxycodone. Shopping was defined by having overlapping opioid prescriptions from >1 prescriber filled at ≥3 pharmacies; abuse by having International Classification of Diseases, 9th revision diagnoses reflecting opioid abuse, addiction, or dependence. To determine their association, we cross-tabulated shopping and opioid abuse and calculated odds ratios. Risks of developing each outcome were estimated using logistic regression. Among 277,401 participants initiating opioid use with tapentadol (39,524) or oxycodone (237,877), 0.6% developed shopping behavior, 0.75% developed abuse. Higher proportions of patients in the oxycodone group developed shopping behavior and abuse than in the tapentadol group (shopping: adjusted odds ratio [95% confidence interval], 0.45 [0.36-0.55]; abuse: 0.44 [0.37-0.54]). Shopping behavior and abuse were associated; of those with shopping behavior, 6.5% had abuse. Age (18 to 64 y), sex (male), prior benzodiazepine use, paying cash, and history (mood disorders, abuse of nonopioid medications, and back pain) were risk factors for developing either outcome. Shopping behavior and abuse measure complementary, but associated, constructs, which further validates the current definition of shopping. The risk of developing either is lower among patients who initiate opioid use with tapentadol than those who initiate opioid use with oxycodone.

Comparison of the Risks of Shopping Behavior and Opioid Abuse Between Tapentadol and Oxycodone and Association of Shopping Behavior and Opioid Abuse

PubMed Central

Fife, Daniel; Kihm, Mary A.; Mastrogiovanni, Greg; Yuan, Yingli

2014-01-01

Objectives: This study compared the risks of opioid shopping behavior and opioid abuse between tapentadol immediate release and oxycodone immediate release and, to validate the definition of shopping, examined the association between opioid shopping and opioid abuse further. Materials and Methods: This retrospective cohort study using linked dispensing and diagnosis databases followed opioid-naive patients for development of shopping behavior and/or opioid abuse during 1 year after initial exposure to tapentadol or oxycodone. Shopping was defined by having overlapping opioid prescriptions from >1 prescriber filled at ≥3 pharmacies; abuse by having International Classification of Diseases, 9th revision diagnoses reflecting opioid abuse, addiction, or dependence. To determine their association, we cross-tabulated shopping and opioid abuse and calculated odds ratios. Risks of developing each outcome were estimated using logistic regression. Results: Among 277,401 participants initiating opioid use with tapentadol (39,524) or oxycodone (237,877), 0.6% developed shopping behavior, 0.75% developed abuse. Higher proportions of patients in the oxycodone group developed shopping behavior and abuse than in the tapentadol group (shopping: adjusted odds ratio [95% confidence interval], 0.45 [0.36-0.55]; abuse: 0.44 [0.37-0.54]). Shopping behavior and abuse were associated; of those with shopping behavior, 6.5% had abuse. Age (18 to 64 y), sex (male), prior benzodiazepine use, paying cash, and history (mood disorders, abuse of nonopioid medications, and back pain) were risk factors for developing either outcome. Discussion: Shopping behavior and abuse measure complementary, but associated, constructs, which further validates the current definition of shopping. The risk of developing either is lower among patients who initiate opioid use with tapentadol than those who initiate opioid use with oxycodone. PMID:24370606

STS-126 crew visit

NASA Image and Video Library

2009-01-13

Stennis Space Center Director Gene Goldman (center) stands with astronauts Christopher Ferguson (right) and Heidemarie Stefanyshyn-Piper in front of the A-2 Test Stand during the space shuttle crew members' visit to NASA's rocket engine testing facility Jan. 13. During their visit, Ferguson and Stefanyshyn-Piper reported on the STS-126 space shuttle delivery and servicing mission to the International Space Station. Ferguson served as commander of the mission. Stefanyshyn-Piper served as a mission specialist.

STS-126 crew visit

NASA Technical Reports Server (NTRS)

2009-01-01

Stennis Space Center Director Gene Goldman (center) stands with astronauts Christopher Ferguson (right) and Heidemarie Stefanyshyn-Piper in front of the A-2 Test Stand during the space shuttle crew members' visit to NASA's rocket engine testing facility Jan. 13. During their visit, Ferguson and Stefanyshyn-Piper reported on the STS-126 space shuttle delivery and servicing mission to the International Space Station. Ferguson served as commander of the mission. Stefanyshyn-Piper served as a mission specialist.

CAR MACHINE SHOP, FIRST FLOOR, DETAIL OF STEEL COLUMN AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

CAR MACHINE SHOP, FIRST FLOOR, DETAIL OF STEEL COLUMN AND BEAM ALTERATION, LOOKING SOUTH. MODIFICATION WAS DONE TO ACCOMMODATE MACHINERY DURING THE BUILDING'S USE AS A WHEEL SHOP. - Southern Pacific, Sacramento Shops, Car Machine Shop, 111 I Street, Sacramento, Sacramento County, CA

General view along tracks to Locomotive Shop with Car Shop ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General view along tracks to Locomotive Shop with Car Shop on right. Note locomotive tires leaning against Car Shop wall. View from west - East Broad Top Railroad & Coal Company, State Route 994, West of U.S. Route 522, Rockhill Furnace, Huntingdon County, PA

Technical and Occupational Shops.

ERIC Educational Resources Information Center

Ontario Dept. of Education, Toronto. School Planning and Building Research Section.

This booklet presents suggested plans and specifications for and discusses facilities common to technical and occupational shops. Drawings, room plans, and text illustrate specifications for drafting rooms, a welding shop, an automechanics shop, an auto body shop, and a high school greenhouse. Also included are facility designs for agricultural…

How do people with learning disability experience the city centre? A Sheffield case study.

PubMed

McClimens, Alex; Partridge, Nick; Sexton, Ed

2014-07-01

The use of city centre spaces by people with learning disability is not much debated in the literature. Here we include the thoughts and opinions of groups of people with learning disability as we undertook some guided walks through Sheffield city centre. We found that few of the participants had independent access to the city centre. Many cited concerns over personal safety and the most, on few occasions when they did visit, did so with family and/or paid staff for pre-planned purposes, usually linked to shopping. The need for appropriate support figured prominently. There is also a need to re-assess what we mean by social inclusion for this cohort. Copyright © 2014 Elsevier Ltd. All rights reserved.

6. North wall and east end of air brake shop ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. North wall and east end of air brake shop section of roundhouse at center. East end of boiler shop section of roundhouse to the right of air brake shop. East end of blacksmith shop section of roundhouse at far right. View to southeast. - Duluth & Iron Range Rail Road Company Shops, Roundhouse, Southwest of downtown Two Harbors, northwest of Agate Bay, Two Harbors, Lake County, MN

3. Oblique view of southwest end, Roundhouse Machine Shop Extension, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. Oblique view of southwest end, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to north showing the curvature of the end wall that was the common wall with the Roundhouse, and the large metal-clad doors through which steam locomotives were moved into the Machine Shop (135mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

Detail of north end of the Electrical Shop (foreground) and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail of north end of the Electrical Shop (foreground) and Sheet Metal Shop, note the metal-frame windows in the Electrical Shop, view facing east - Kahului Cannery, Plant No. 28, Boiler House, Sheet Metal and Electrical Shops, 120 Kane Street, Kahului, Maui County, HI

11. Interior detail, Boiler Room, fire door to the adjacent ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. Interior detail, Boiler Room, fire door to the adjacent Blacksmith Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to southwest (90mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

45 CFR 155.710 - Eligibility standards for SHOP.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Eligibility standards for SHOP. 155.710 Section... Exchange Functions: Small Business Health Options Program (SHOP) § 155.710 Eligibility standards for SHOP. (a) General requirement. The SHOP must permit qualified employers to purchase coverage for qualified...

Youth Clothes-Shopping Behavior: An Analysis by Gender.

ERIC Educational Resources Information Center

Peters, John F.

1989-01-01

Explored possible gender differences in clothes-shopping behavior among adolescents. Findings from 387 college students revealed that: parents financially assisted sons and daughters equally; there was no gender difference in shopping frequency; mothers more frequently shopped with sons than with daughters; fathers rarely shopped with any…

Wildflower plantings do not compete with neighboring almond orchards for pollinator visits

USDA-ARS?s Scientific Manuscript database

The engineering of flowering agricultural field borders has emerged as a research and policy priority to mitigate threats to pollinators. Studies have, however, rarely addressed the potential that flowering field borders might compete with neighboring crops for pollinator visits if they both are in ...

NRC visit

NASA Image and Video Library

2012-08-22

Four members of the National Research Council visited Stennis Space Center on Aug. 22, touring test stands and facilities, and holding roundtable discussions with Stennis leaders. The NRC mission is to improve government decision making and public policy, increase public understanding, and promote the acquisition and dissemination of knowledge in matters involving science, engineering, technology and health.

Expedition 52 Red Square Visit

NASA Image and Video Library

2017-07-10

Expedition 52 flight engineers Paolo Nespoli of ESA, left, Sergey Ryazanskiy of Roscosmos, center, and Randy Bresnik of NASA visit Red Square to lay roses at the site where Russian space icons are interred as part of traditional pre-launch ceremonies, Monday, July 10, 2017 in Moscow. Photo Credit: (NASA/Bill Ingalls)