An Evaluation of Performance Contracting for HEW.

ERIC Educational Resources Information Center

Carpenter, Polly

This speech provides a summary of the Rand/HEW study of eight performance contract programs in the five cities of Gilroy, California; Texarkana, Arkansas; Gary, Indiana; Grand Rapids, Michigan; and Norfolk, Virginia. The effects of performance contracting on instruction and on student learning, the program costs and management, the contractors,…

ATHENA: system studies and optics accommodation

NASA Astrophysics Data System (ADS)

Ayre, M.; Bavdaz, M.; Ferreira, I.; Wille, E.; Fransen, S.; Stefanescu, A.; Linder, M.

2016-07-01

ATHENA is currently in Phase A, with a view to adoption upon a successful Mission Adoption Review in 2019/2020. After a brief presentation of the reference spacecraft (SC) design, this paper will focus on the functional and environmental requirements, the thermo-mechanical design and the Assembly, Integration, Verification & Test (AIVT) considerations related to housing the Silicon Pore Optics (SPO) Mirror Modules (MM) in the very large Mirror Assembly Module (MAM). Initially functional requirements on the MM accommodation are presented, with the Effective Area and Half Energy Width (HEW) requirements leading to a MAM comprising (depending on final mirror size selected) between 700-1000 MMs, co-aligned with exquisite accuracy to provide a common focus. A preliminary HEW budget allocated across the main error-contributors is presented, and this is then used as a reference to derive subsequent requirements and engineering considerations, including: The procedures and technologies for MM-integration into the Mirror Structure (MS) to achieve the required alignment accuracies in a timely manner; stiffness requirements and handling scheme required to constrain deformation under gravity during x-ray testing; temperature control to constrain thermo-elastic deformation during flight; and the role of the Instrument Switching Mechanism (ISM) in constraining HEW and Effective Area errors. Next, we present the key environmental requirements of the MMs, and the need to minimise shock-loading of the MMs is stressed. Methods to achieve this Ø are presented, including: Selection of a large clamp-band launch vehicle interface (LV I/F); lengthening of the shock-path from the LV I/F to the MAM I/F; modal-tuning of the MAM to act as a low-pass filter during launch shock events; use of low-shock HDRMs for the MAM; and the possibility to deploy a passive vibration solution at the LV I/F to reduce loads.

Health Extension Workers' and Mothers' Attitudes to Maternal Health Service Utilization and Acceptance in Adwa Woreda, Tigray Region, Ethiopia.

PubMed

Jackson, Ruth; Tesfay, Fisaha Haile; Godefay, Hagos; Gebrehiwot, Tesfay Gebregzabher

2016-01-01

The maternal health system in Ethiopia links health posts in rural communities (kebeles) with district (woreda) health centres, and health centres with primary hospitals. At each health post two Health Extension Workers (HEWs) assist women with birth preparedness, complication readiness, and mobilize communities to facilitate timely referral to mid-level service providers. This study explored HEWs' and mother's attitudes to maternal health services in Adwa Woreda, Tigray Region. In this qualitative study, we trained 16 HEWs to interview 45 women to gain a better understanding of the social context of maternal health related behaviours. Themes included barriers to health services; women's social status and mobility; and women's perceptions of skilled birth attendant's care. All data were analyzed thematically. There have been substantial efforts to improve maternal health and reduce maternal mortality in Adwa Woreda. Women identified barriers to healthcare including distance and lack of transportation due to geographical factors; the absence of many husbands due to off-woreda farming; traditional factors such as zwar (some pregnant women are afraid of meeting other pregnant women), and discouragement from mothers and mothers-in-law who delivered their children at home. Some women experienced disrespectful care at the hospital. Facilitators to skilled birth attendance included: identification of pregnant women through Women's Development Groups (WDGs), and referral by ambulance to health facilities either before a woman's Expected Due Date (EDD) or if labour started at home. With the support of WDGs, HEWs have increased the rate of skilled birth attendance by calling ambulances to transfer women to health centres either before their EDD or when labour starts at home. These findings add to the growing body of evidence that health workers at the community level can work with women's groups to improve maternal health, thus reducing the need for emergency obstetric care in low-income countries.

Head Start/EPSDT Collaboration Evaluation. Final Report.

ERIC Educational Resources Information Center

Boone, Young and Associates, Inc., New York, NY.

This is the final report on the first year evaluation of the Head Start/Medicaid Early and Periodic Screening, Diagnosis and Treatment (EPSDT) Collaborative Effort, a demonstration program that was initiated by the Office of Child Development OCD/HEW in 1974. In initiating the program, OCD/HEW set forth the following objectives: (1) to assess the…

Accelerated shelf-life testing of quality loss for a commercial hydrolysed hen egg white powder.

PubMed

Rao, Qinchun; Rocca-Smith, Jeancarlo R; Schoenfuss, Tonya C; Labuza, Theodore P

2012-11-15

In recent years, due to the specific health benefits associated with bioactive peptides and the reduction of protein allergenicity by enzymatic hydrolysis, the utilisation of protein hydrolysates in functional foods and beverages for both protein supplementation and clinical use has significantly increased. However, few studies have explored the moisture-induced effects on food protein hydrolysates, and the resulting changes in the structure and texture of the food matrix as well as the loss in functional properties of bioactive peptides during storage. The main purpose of this study is to determine the influence of water activity (a(w)) on the storage quality of a commercial spray-dried hydrolysed hen egg white powder (HEW). During storage at 45 °C for two months at different a(w)s (0.05-0.79), the selected physicochemical properties of the HEW samples were analysed. Overall, the effect of a(w) on the colour change of HEW at 45 °C for one month was similar to that of HEW after four months at 23 °C due to the presence of a small amount of glucose in HEW. Several structural changes occurred at a(w)s from 0.43 to 0.79 including agglomeration, stickiness and collapse. Kinetic analysis showed a first-order hyperbolic model fit for the change in the L(∗) value, the total colour difference (ΔE(∗)) and the fluorescence intensity (FI). There was a high correlation between colour change and fluorescence, as expected for the Maillard reaction. The reduction in the remaining free amino groups was about 5% at a(w) 0.50 and 6% at a(w) 0.79 after one month storage. In summary, during storage, the Maillard reaction and/or its resulting products could decrease the nutritional value and the quality of HEW. Copyright © 2012 Elsevier Ltd. All rights reserved.

Delinquency Level Classification Via the HEW Community Program Youth Impact Scales.

ERIC Educational Resources Information Center

Truckenmiller, James L.

The former HEW National Strategy for Youth Development (NSYD) model was created as a community-based planning and procedural tool to promote youth development and prevent delinquency. To assess the predictive power of NSYD Impact Scales in classifying youths into low, medium, and high delinquency levels, male and female students aged 10-19 years…

Predicting Vandalism in a General Youth Sample via the HEW Youth Development Model's Community Program Impact Scales, Age, and Sex.

ERIC Educational Resources Information Center

Truckenmiller, James L.

The former HEW National Strategy for Youth Development model was a community-based planning and procedural tool to enhance and to prevent delinquency through a process of youth needs assessments, needs targeted programs, and program impact evaluation. The program's 12 Impact Scales have been found to have acceptable reliabilities, substantial…

Press Conference with Elliot L. Richardson, Secretary of HEW.

ERIC Educational Resources Information Center

Department of Health, Education, and Welfare, Washington, DC.

Two documents were released to the press on January 18, 1973, by Secretary Richardson, one summarizing his term of office as Secretary of Health, Education, and Welfare, and one reporting on HEW potential for the seventies (SO 005 666, SO 005 699). In an introductory statement prior to the press conference, the question of whether or not we as a…

Predicting Wanton Assault in a General Youth Sample via the HEW Youth Development Model's Community Program Impact Scales, Age and Sex.

ERIC Educational Resources Information Center

Truckenmiller, James L.

The former HEW National Strategy for Youth Development Model was a community-based planning and procedural tool designed to enhance positive youth development and prevent delinquency through a process of youth needs assessment, development of targeted programs, and program impact evaluation. A series of 12 Impact Scales most directly reflect the…

NASA Stennis hosts 2010 NASA Day at the Capitol.

NASA Technical Reports Server (NTRS)

2010-01-01

Astronaut Danny Olivas (center) speaks to members of the Mississippi Senate in chambers during NASA Day at the Capitol in Jackson on Jan. 6. Olivas was joined at the podium by Stennis Deputy Director Patrick Scheuermann (standing, l to r), Sen. David Baria, D-Bay St. Louis, and Sen. Billy Hewes, R-Gulfport. Baria and Hewes both are members of the Mississippi Senate Gulf Coast delegation.

New model for Jurassic microcontinent movement and Gondwana breakup in the Weddell Sea region

NASA Astrophysics Data System (ADS)

Jordan, Tom; Ferraccioli, Fausto; Leat, Philip

2017-04-01

The breakup of the Gondwana supercontinent changed the face of our planet. Precursors of supercontinental breakup are widely recognised in the Weddell Sea region in the Jurassic. These include the Karoo/Ferrar Large Igneous Province that extends from South Africa to East Antarctica and significant continental rifting and associated translation of microcontinental blocks in the Weddell Sea Embayment region. However, significant controversy surrounds the pre-breakup position, extent, timing and driving mechanism of inferred microcontinental movement. In particular geological and paleomagnetic data suggest >1000 km of translation and 90 degree rotation of the Haag-Ellsworth Whitmore block (HEW) away from East Antarctica. In contrast, some geophysical interpretations suggest little or no Jurassic or subsequent HEW block movement. Here we present a simpler tectonic model for the Weddell Sea Rift System and HEW movement, derived from our new compilation of airborne geophysical data, satellite magnetic data and potential field modelling (Jordan et al., 2016- Gondwana Res.). Based on the amount of inferred Jurassic crustal extension and pattern of magnetic anomalies we propose that the HEW was translated 500 km towards the Paleo-Pacific margin of Gondwana, possibly in response to a process of slab roll-back that led to distributed back-arc extension in the Weddell Sea Rift System. Widespread magmatism in the region was likely influenced by the presence of one or more mantle plumes impinging beneath the stretching lithosphere. A second phase of continental extension is inferred to have occurred between 180 and 165 Ma (prior to seafloor spreading) and is more closely associated with Gondwana breakup. This second phase over-printed the northern part of the older back arc system. We find no geophysical evidence indicating more than 30 degrees of syn-extensional HEW rotation during Jurassic rifting in the southern Weddell Sea Rift System. Instead, we propose the majority ( 60 degrees) of the inferred block rotation of the HEW sedimentary sequences occurred prior to Jurassic rifting, likely during the Permian-age Gondwanide orogeny as a phase of oroclinal bending in an overall transpressional intraplate orogenic setting.

Finding the Common Denominator: The Capacity of State Agencies to Assist the HEW Office for Civil Rights.

ERIC Educational Resources Information Center

Larson, Meredith A.; And Others

This two part study was designed to determine whether working relationships can be expanded between the Office for Civil Rights (OCR) and various State agencies with similar missions. First, a survey of State laws and enforcement mechanisms identifies those States with current laws or policies similar to those that OCR administers. Results…

Are Delinquents Different? Predictive Patterns for Low, Mid and High Delinquency Levels in a General Youth Sample via the HEW Youth Development Model's Impact Scales.

ERIC Educational Resources Information Center

Truckenmiller, James L.

The Health, Education and Welfare (HEW) Office of Youth Development's National Strategy for Youth Development model was promoted as a community-based planning and procedural tool for enhancing positive youth development and reducing delinquency. To test the applicability of the model as a function of delinquency level, the program's Impact Scales…

Cortical brain structure and sexual orientation in adult females with bipolar disorder or attention deficit hyperactivity disorder.

PubMed

Abé, Christoph; Rahman, Qazi; Långström, Niklas; Rydén, Eleonore; Ingvar, Martin; Landén, Mikael

2018-05-29

Nonheterosexual individuals have higher risk of psychiatric morbidity. Together with growing evidence for sexual orientation-related brain differences, this raises the concern that sexual orientation may be an important factor to control for in neuroimaging studies of neuropsychiatric disorders. We studied sexual orientation in adult psychiatric patients with bipolar disorder (BD) or ADHD in a large clinical cohort (N = 154). We compared cortical brain structure in exclusively heterosexual women (HEW, n = 29) with that of nonexclusively heterosexual women (nHEW, n = 37) using surface-based reconstruction techniques provided by FreeSurfer. The prevalence of nonheterosexual sexual orientation was tentatively higher than reported in general population samples. Consistent with previously reported cross-sex shifted brain patterns among homosexual individuals, nHEW patients showed significantly larger cortical volumes than HEW in medial occipital brain regions. We found evidence for a sex-reversed difference in cortical volume among nonheterosexual female patients, which provides insights into the neurobiology of sexual orientation, and may provide the first clues toward a better neurobiological understanding of the association between sexual orientation and mental health. We also suggest that sexual orientation is an important factor to consider in future neuroimaging studies of populations with certain mental health disorders. © 2018 The Authors. Brain and Behavior published by Wiley Periodicals, Inc.

Casper W. Weinberger to be Secretary of Health, Education, and Welfare: Hearings Before the Committee on Labor and Public Welfare. United States Senate, Ninety-Third Congress. Part 2: Appendix--Comprehensive HEW Simplification and Reform "MEGA Proposal".

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Senate Committee on Labor and Public Welfare.

A proposal up for consideration before the United States Senate is discussed. The program suggested is a redesign of the Department of Health, Education, and Welfare in keeping with the principles of the New Federalism. The proposal touches every major area of HEW policy: it simplifies the Department's program structure; it narrows and focuses the…

2011 NASA Day at the Capitol

NASA Image and Video Library

2011-02-10

Astronaut Steven Swanson (front) speaks to members of the Mississippi Senate in chambers, with Lt. Gov. Phil Bryant presiding (rear), during NASA Day at the Capitol in Jackson on Feb. 10. Swanson was joined at the podium by Sen. David Baria, D-Bay St. Louis (l to r), NASA Shared Services Center Executive Director Rick Arbuthnot, Stennis Director Patrick Scheuermann, Sen. Ezell Lee, D-Picayune, and Sen. Billy Hewes, R-Gulfport. Baria, Lee and Hewes all are members of the Mississippi Senate Gulf Coast delegation.

The Role of Health Extension Workers in Linking Pregnant Women With Health Facilities for Delivery in Rural and Pastoralist Areas of Ethiopia.

PubMed

Jackson, Ruth; Hailemariam, Assefa

2016-09-01

Women's preference to give birth at home is deeply embedded in Ethiopian culture. Many women only go to health facilities if they have complications during birth. Health Extension Workers (HEWs) have been deployed to improve the utilization of maternal health services by bridging the gap between communities and health facilities. This study examined the barriers and facilitators for HEWs as they refer women to mid-level health facilities for birth. A qualitative study was conducted in three regions: Afar Region, Southern Nations Nationalities and People's Region and Tigray Region between March to December 2014. Interviews and focus group discussions were conducted with 45 HEWs, 14 women extension workers (employed by Afar Pastoralist Development Association, Afar Region) and 11 other health workers from health centers, hospitals or health offices. Data analysis was done based on collating the data and identifying key themes. Barriers to health facilities included distance, lack of transportation, sociocultural factors and disrespectful care. Facilitators for facility-based deliveries included liaising with Health Development Army (HDA) leaders to refer women before their expected due date or if labour starts at home; the introduction of ambulance services; and, provision of health services that are culturally more acceptable for women. HEWs can effectively refer more women to give birth in health facilities when the HDA is well established, when health staff provide respectful care, and when ambulance is available at any time.

Understanding modern contraception uptake in one Ethiopian community: a case study.

PubMed

Sedlander, Erica; Bingenheimer, Jeffrey B; Edberg, Mark C; Rimal, Rajiv N; Shaikh, Hina; Munar, Wolfgang

2018-06-20

In the last decade, the proportion of Ethiopian women using contraceptive methods has increased substantially (from 14% in 2005 to 35% in 2016 among married women). Numerous factors have contributed to the increased uptake. An important one is the implementation of the Health Extension Program, a government-led health service delivery strategy that has deployed more than 38,000 health extension workers (HEWs) throughout the country. Key mechanisms underlying the success of this program are not well understood. Using a case study approach, the goal of this study is to describe how key features of local contexts, community perceptions, and messaging by HEWs have contributed to the increased use of modern contraception in one community in Ethiopia. We conducted focus groups and individual interviews with men, women, adolescents, and key informants, including (HEWs), in Oromia, Ethiopia. We used a random sampling protocol to recruit all participants except key informants, with whom purposive sampling was used to ensure participants were knowledgeable on family planning in the village. Interviews were audio recorded, translated, transcribed, and then analyzed using applied thematic analysis and NVivo v.11 qualitative research software. We identified four themes that may explain uptake of contraception: (1) HEWs are seen as trusted and valued community members who raised awareness about family planning; (2) the HEW messaging that contraception is useful to space pregnancies among married women was effective; (3) the message that spacing is healthy for mother and child was also effective; and (4) communicating to the entire community (including men, women, adolescents, and religious leaders), contributed to changing attitudes around contraception. The four aspects of the Health Extension Program approach increased uptake of contraception in our sample. In contexts where community health workers are valued by the health systems and local communities they serve, this type of approach to widening modern contraception use could help increase uptake and address unmet need. Understanding these granular aspects of the program in one local context may help explain how use of contraception increased in the country as a whole.

Increasing Access to Tuberculosis Services in Ethiopia: Findings From a Patient-Pathway Analysis.

PubMed

Fekadu, Lelisa; Hanson, Christy; Osberg, Mike; Makayova, Julia; Mingkwan, Pia; Chin, Daniel

2017-11-06

In Ethiopia, extensive scale-up of the availability of health extension workers (HEWs) at the community level has been credited with increased identification and referral of patients with presumptive tuberculosis, which has contributed to increased tuberculosis case notification and better treatment outcomes. However, nearly 30% of Ethiopia's estimated 191000 patients with tuberculosis remained unnotified in 2015. A better understanding of patient care-seeking practices may inform future government action to reach all patients with tuberculosis. A patient-pathway analysis was completed to assess the alignment between patient care initiation and the availability of diagnostic and treatment services at the national level. More than one third of patients initiated care with HEWs, who refer patients to health centers for diagnosis. An additional one third of patients initiated care at health centers. Of those health centers, >80% had microscopy services, but few had access to Xpert. Despite an extensive microscopy and radiography network at middle levels of the health system, a quarter of all notified patients with tuberculosis had no bacteriological confirmation of disease. While 30% of patients reported receiving some form of care from the private sector, private-sector facilities, especially pharmacies, were not widely accessed for tuberculosis diagnosis. The availability of HEWs can increase access to tuberculosis diagnostic and treatment support services, particularly for rural populations. Continued strengthening of referral systems from HEWs and health posts are needed to enable consistent and timely access to Xpert as an initial diagnostic test and to drug resistance screening. © The Author 2017. Published by Oxford University Press for the Infectious Diseases Society of America.

Space age health care delivery

NASA Technical Reports Server (NTRS)

Jones, W. L.

1977-01-01

Space age health care delivery is being delivered to both NASA astronauts and employees with primary emphasis on preventive medicine. The program relies heavily on comprehensive health physical exams, health education, screening programs and physical fitness programs. Medical data from the program is stored in a computer bank so epidemiological significance can be established and better procedures can be obtained. Besides health care delivery to the NASA population, NASA is working with HEW on a telemedicine project STARPAHC, applying space technology to provide health care delivery to remotely located populations.

The role of mHealth intervention on maternal and child health service delivery: findings from a randomized controlled field trial in rural Ethiopia

PubMed Central

Otto, Kate; Herbst, Christopher H.

2017-01-01

Background The provision of consistent and quality maternal and child health (MCH) services is a challenge for Ethiopia where most of the population lives in the rural setup. Health service delivery is constrained mainly by shortage of health professionals, meager resources, limited awareness among the society and bureaucratic procedures. Low health service utilization of antenatal care (ANC), delivery services, and postnatal care (PNC) are believed to contribute for high maternal and child mortality rates. Innovative approach like mHealth based technological intervention believed to alleviate such challenges in countries like ours. However, currently, there are few evidences that demonstrate the impact of mHealth technology applications on the level of service utilization. Therefore, the objective our study is to assess the role of mobile phone equipped with short message service (SMS) based data-exchange software linking community health workers to Health Centers in rural Ethiopia affect selected MCH outcomes. Methods A community-based randomized control trial (RCT) was conducted in three woredas of Guraghe zone (Ezha, partial &Abeshge full intervention, Sodo Control). Mobile phones equipped with FrontlineSMS based, locally developed application was distributed to all health extension workers (HEWs) to both intervention woredas who filled maternal, child and stock related forms and submitted to the central server which in turn sends reminder about the scheduled date of ANC visit, expected date of delivery, PNC, immunization schedule and vaccine and contraceptive stock status. Moreover, in Abeshge, the voluntary health workers (vCHW) and HEW supervisors in both intervention woreda were given a phone to facilitate communication with the HEW. No mobile was offered to the control woreda.Pre [2012] and post [2013] intervention community based survey on mothers who have under 5 and under 1 year old child was done to assess the effect of the mobile intervention on selected MCH process indicators. Structured and pretested questionnaire was used to collect data and SPSS v16 statistical software was used for analysis. Results Three thousand two hundred and forty mothers, 1,080 from each, were surveyed in the three woredas. The study revealed that the proportion of mothers receiving more than four ANC visits increased significantly in both intervention woredas. Besides, the rate of ANC delivered by HEWs improved in Ezha woreda (T1) (19.01% to 28.27%), proportions of deliveries attended by skilled health workers increased and home delivery decreased in all woredas; most pronounced increases in referrals from health post to health center by HEWs, reported in Ezha and Abeshge. The intervention also led to a significant reduction in stock-outs of preferred contraceptive products in Ezha (T1) from 16.96% to 8.24% but no change was observed in both contraceptive prevalence and immunization rates in the control and the other intervention woreda. Conclusions The study confirmed the positive contribution of SMS based mobile phone intervention in most of the selected MCH service indicators, like improvement in the percent of recommended number of ANC visit, percentage of delivery attended by health workers and facilitating the work processes of the health workers in rural Ethiopia. PMID:29184891

The role of mHealth intervention on maternal and child health service delivery: findings from a randomized controlled field trial in rural Ethiopia.

PubMed

Atnafu, Asfaw; Otto, Kate; Herbst, Christopher H

2017-01-01

The provision of consistent and quality maternal and child health (MCH) services is a challenge for Ethiopia where most of the population lives in the rural setup. Health service delivery is constrained mainly by shortage of health professionals, meager resources, limited awareness among the society and bureaucratic procedures. Low health service utilization of antenatal care (ANC), delivery services, and postnatal care (PNC) are believed to contribute for high maternal and child mortality rates. Innovative approach like mHealth based technological intervention believed to alleviate such challenges in countries like ours. However, currently, there are few evidences that demonstrate the impact of mHealth technology applications on the level of service utilization. Therefore, the objective our study is to assess the role of mobile phone equipped with short message service (SMS) based data-exchange software linking community health workers to Health Centers in rural Ethiopia affect selected MCH outcomes. A community-based randomized control trial (RCT) was conducted in three woredas of Guraghe zone (Ezha, partial &Abeshge full intervention, Sodo Control). Mobile phones equipped with FrontlineSMS based, locally developed application was distributed to all health extension workers (HEWs) to both intervention woredas who filled maternal, child and stock related forms and submitted to the central server which in turn sends reminder about the scheduled date of ANC visit, expected date of delivery, PNC, immunization schedule and vaccine and contraceptive stock status. Moreover, in Abeshge, the voluntary health workers (vCHW) and HEW supervisors in both intervention woreda were given a phone to facilitate communication with the HEW. No mobile was offered to the control woreda.Pre [2012] and post [2013] intervention community based survey on mothers who have under 5 and under 1 year old child was done to assess the effect of the mobile intervention on selected MCH process indicators. Structured and pretested questionnaire was used to collect data and SPSS v16 statistical software was used for analysis. Three thousand two hundred and forty mothers, 1,080 from each, were surveyed in the three woredas. The study revealed that the proportion of mothers receiving more than four ANC visits increased significantly in both intervention woredas. Besides, the rate of ANC delivered by HEWs improved in Ezha woreda (T1) (19.01% to 28.27%), proportions of deliveries attended by skilled health workers increased and home delivery decreased in all woredas; most pronounced increases in referrals from health post to health center by HEWs, reported in Ezha and Abeshge. The intervention also led to a significant reduction in stock-outs of preferred contraceptive products in Ezha (T1) from 16.96% to 8.24% but no change was observed in both contraceptive prevalence and immunization rates in the control and the other intervention woreda. The study confirmed the positive contribution of SMS based mobile phone intervention in most of the selected MCH service indicators, like improvement in the percent of recommended number of ANC visit, percentage of delivery attended by health workers and facilitating the work processes of the health workers in rural Ethiopia.

Women health extension workers: Capacities, opportunities and challenges to use eHealth to strengthen equitable health systems in Southern Ethiopia.

PubMed

Dusabe-Richards, John N; Tesfaye, Hayley Teshome; Mekonnen, Jarso; Kea, Aschenaki; Theobald, Sally; Datiko, Daniel G

2016-12-27

This study assesses the feasibility of female health extension workers (HEWs) using eHealth within their core duties, supporting both the design and capacity building for an eHealth system project focussed initially on tuberculosis, maternal child health, and gender equity. Health extension workers, Health Centre Heads, District Health Officers, Zonal Health Department and Regional Health Bureau representatives in Southern Ethiopia. The study was undertaken in Southern Ethiopia with three districts in Sidama zone (population of 3.5 million) and one district in Gedeo zone (control zone with similar health service coverage and population density). Mixed method baseline data collection was undertaken, using quantitative questionnaires (n = 57) and purposively sampled qualitative face-to-face semi-structured interviews (n = 10) and focus group discussions (n = 3). Themes were identified relating to HEW commitment and role, supervision, and performance management. The Health Management Information System (HMIS) was seen as important by all participants, but with challenges of information quality, accuracy, reliability and timeliness. Participants' perceptions varied by group regarding the purpose and benefits of HMIS as well as the potential of an eHealth system. Mobile phones were used regularly by all participants. eHealth technology presents a new opportunity for the Ethiopian health system to improve data quality and community health. Front-line female HEWs are a critical bridge between communities and health systems. Empowering HEWs, supporting them and responding to the challenges they face will be an important part of ensuring the sustainability and responsiveness of eHealth strategies. Findings have informed the subsequent eHealth technology design and implementation, capacity strengthening approach, supervision, and performance management approach.

Sexual orientation related differences in cortical thickness in male individuals.

PubMed

Abé, Christoph; Johansson, Emilia; Allzén, Elin; Savic, Ivanka

2014-01-01

Previous neuroimaging studies demonstrated sex and also sexual orientation related structural and functional differences in the human brain. Genetic information and effects of sex hormones are assumed to contribute to the male/female differentiation of the brain, and similar effects could play a role in processes influencing human's sexual orientation. However, questions about the origin and development of a person's sexual orientation remain unanswered, and research on sexual orientation related neurobiological characteristics is still very limited. To contribute to a better understanding of the neurobiology of sexual orientation, we used magnetic resonance imaging (MRI) in order to compare regional cortical thickness (Cth) and subcortical volumes of homosexual men (hoM), heterosexual men (heM) and heterosexual women (heW). hoM (and heW) had thinner cortices primarily in visual areas and smaller thalamus volumes than heM, in which hoM and heW did not differ. Our results support previous studies, which suggest cerebral differences between hoM and heM in regions, where sex differences have been reported, which are frequently proposed to underlie biological mechanisms. Thus, our results contribute to a better understanding of the neurobiology of sexual orientation.

Thin fused silica optics for a few arcsec angular resolution and large collecting area x-ray telescope

NASA Astrophysics Data System (ADS)

Citterio, O.; Civitani, M. M.; Pareschi, G.; Basso, S.; Campana, S.; Conconi, P.; Ghigo, M.; Mattaini, E.; Moretti, A.; Parodi, G.; Tagliaferri, G.

2013-09-01

The implementation of a X-ray mission with high imaging capabilities, similar to those achieved with Chandra (< 1 arcsec Half Energy Width, HEW), but with a much larger throughput is a very attractive perspective, even if challenging. For such a mission the scientific opportunities, in particular for the study of the early Universe, would remain at the state of the art for the next decades. At the beginning of the new millennium the XEUS mission has been proposed, with an effective area of several m2 and an angular resolution better than 2 arcsec HEW. Unfortunately, after the initial study, this mission was not implemented, mainly due to the costs and the low level of technology readiness. Currently the most advanced proposal for such a kind of mission is the SMART-X project, led by CfA and involving several other US Institutes. This project is based on adjustable segments of thin foil mirrors with piezo-electric actuators, aiming to achieve an effective area < 2 m2 at 1 keV and an angular resolution better than 1 arcsec HEW. Another attractive technology to realize an X-ray telescope with similar characteristics is being developed at NASA/Goddard. In this case the mirrors are based on Si substrates that are super-polished and figured starting from a bulky Si ingot, from which they are properly cut. Here we propose an alternative method based on precise direct grinding, figuring and polishing of thin (a few mm) glass shells with innovative deterministic polishing methods. This is followed by a final correction via ion figuring to obtain the desired accuracy in order to achieve the 1 arc sec HEW requirement. For this purpose, a temporary stiffening structure is used to support the shell from the polishing operations up to its integration in the telescope supporting structure. We will present the technological process under development, the results achieved so far and some mission scenarios based on this kind of optics, aiming to achieve an effective area more than 10 times larger than Chandra and an angular resolution of 1 arcsec HEW on axis and of a few arcsec off-axis across a large field of view (1 deg in diameter).

Effect of intracrystalline water on longitudinal sound velocity in tetragonal hen-egg-white lysozyme crystals.

PubMed

Tachibana, M; Koizumi, H; Kojima, K

2004-05-01

Longitudinal sound velocity of tetragonal hen-egg-white (HEW) lysozyme crystals was measured during air drying by ultrasonic pulseecho method. The sound velocity increases with exposure to open air and approaches a constant value. The maximum value is approximately 2900 m/s that is about 1.6 times as much as that of original one before drying. In addition, the sound velocity clearly recovers to original one after immersing the dried crystal in solution. Therefore, the sound velocity in tetragonal HEW lysozyme crystals can be reversibly changed due to dehydration and rehydration. These changes in sound velocity are discussed in the light of water-mediated intramolecular and intermolecular interactions in the crystals.

Effect of intracrystalline water on longitudinal sound velocity in tetragonal hen-egg-white lysozyme crystals

NASA Astrophysics Data System (ADS)

Tachibana, M.; Koizumi, H.; Kojima, K.

2004-05-01

Longitudinal sound velocity of tetragonal hen-egg-white (HEW) lysozyme crystals was measured during air drying by ultrasonic pulseecho method. The sound velocity increases with exposure to open air and approaches a constant value. The maximum value is ˜2900 m/s that is about 1.6 times as much as that of original one before drying. In addition, the sound velocity clearly recovers to original one after immersing the dried crystal in solution. Therefore, the sound velocity in tetragonal HEW lysozyme crystals can be reversibly changed due to dehydration and rehydration. These changes in sound velocity are discussed in the light of water-mediated intramolecular and intermolecular interactions in the crystals.

Iterative management of heat early warning systems in a changing climate.

PubMed

Hess, Jeremy J; Ebi, Kristie L

2016-10-01

Extreme heat is a leading weather-related cause of morbidity and mortality, with heat exposure becoming more widespread, frequent, and intense as climates change. The use of heat early warning and response systems (HEWSs) that integrate weather forecasts with risk assessment, communication, and reduction activities is increasingly widespread. HEWSs are frequently touted as an adaptation to climate change, but little attention has been paid to the question of how best to ensure effectiveness of HEWSs as climates change further. In this paper, we discuss findings showing that HEWSs satisfy the tenets of an intervention that facilitates adaptation, but climate change poses challenges infrequently addressed in heat action plans, particularly changes in the onset, duration, and intensity of dangerously warm temperatures, and changes over time in the relationships between temperature and health outcomes. Iterative management should be central to a HEWS, and iteration cycles should be of 5 years or less. Climate change adaptation and implementation science research frameworks can be used to identify HEWS modifications to improve their effectiveness as temperature continues to rise, incorporating scientific insights and new understanding of effective interventions. We conclude that, at a minimum, iterative management activities should involve planned reassessment at least every 5 years of hazard distribution, population-level vulnerability, and HEWS effectiveness. © 2016 New York Academy of Sciences.

Health extension workers improve tuberculosis case finding and treatment outcome in Ethiopia: a large-scale implementation study

PubMed Central

Datiko, Daniel G; Yassin, Mohammed A; Theobald, Sally J; Blok, Lucie; Suvanand, Sahu; Creswell, Jacob

2017-01-01

Background Tuberculosis (TB) is a major cause of death in Ethiopia. One of the main barriers for TB control is the lack of access to health services. Methods We evaluated a diagnostic and treatment service for TB based on the health extension workers (HEW) of the Ethiopian Health Extension Programme in Sidama Zone, with 3.5 million population. We added the services to the HEW routines and evaluated their effect over 4.5 years. 1024 HEWs were trained to identify individuals with symptoms of TB, request sputum samples and prepare smears. Smears were transported to designated laboratories. Individuals with TB were offered treatment at home or the local health post. A second zone (Hadiya) with 1.2 million population was selected as control. We compared TB case notification rates (CNR) and treatment outcomes in the zones 3 years before and 4.5 years after intervention. Results HEWs identified 216 165 individuals with symptoms and 27 918 (12%) were diagnosed with TB. Smear-positive TB CNR increased from 64 (95% CI 62.5 to 65.8) to 127 (95% CI 123.8 to 131.2) and all forms of TB increased from 102 (95% CI 99.1 to 105.8) to 177 (95% CI 172.6 to 181.0) per 100 000 population in the first year of intervention. In subsequent years, the smear-positive CNR declined by 9% per year. There was no change in CNR in the control area. Treatment success increased from 76% before the intervention to 95% during the intervention. Patients lost to follow-up decreased from 21% to 3% (p<0.001). Conclusion A community-based package significantly increased case finding and improved treatment outcome. Implementing this strategy could help meet the Ethiopian Sustainable Development Goal targets. PMID:29209537

A natural and readily available crowding agent: NMR studies of proteins in hen egg white.

PubMed

Martorell, Gabriel; Adrover, Miquel; Kelly, Geoff; Temussi, Piero Andrea; Pastore, Annalisa

2011-05-01

In vitro studies of biological macromolecules are usually performed in dilute, buffered solutions containing one or just a few different biological macromolecules. Under these conditions, the interactions among molecules are diffusion limited. On the contrary, in living systems, macromolecules of a given type are surrounded by many others, at very high total concentrations. In the last few years, there has been an increasing effort to study biological macromolecules directly in natural crowded environments, as in intact bacterial cells or by mimicking natural crowding by adding proteins, polysaccharides, or even synthetic polymers. Here, we propose the use of hen egg white (HEW) as a simple natural medium, with all features of the media of crowded cells, that could be used by any researcher without difficulty and inexpensively. We present a study of the stability and dynamics behavior of model proteins in HEW, chosen as a prototypical, readily accessible natural medium that can mimic cytosol. We show that two typical globular proteins, dissolved in HEW, give NMR spectra very similar to those obtained in dilute buffers, although dynamic parameters are clearly affected by the crowded medium. The thermal stability of one of these proteins, measured in a range comprising both heat and cold denaturation, is also similar to that in buffer. Our data open new possibilities to the study of proteins in natural crowded media. Copyright © 2010 Wiley-Liss, Inc.

Simbol-X Hard X-ray Focusing Mirrors: Results Obtained During the Phase A Study

NASA Astrophysics Data System (ADS)

Tagliaferri, G.; Basso, S.; Borghi, G.; Burkert, W.; Citterio, O.; Civitani, M.; Conconi, P.; Cotroneo, V.; Freyberg, M.; Garoli, D.; Gorenstein, P.; Hartner, G.; Mattarello, V.; Orlandi, A.; Pareschi, G.; Romaine, S.; Spiga, D.; Valsecchi, G.; Vernani, D.

2009-05-01

Simbol-X will push grazing incidence imaging up to 80 keV, providing a strong improvement both in sensitivity and angular resolution compared to all instruments that have operated so far above 10 keV. The superb hard X-ray imaging capability will be guaranteed by a mirror module of 100 electroformed Nickel shells with a multilayer reflecting coating. Here we will describe the technogical development and solutions adopted for the fabrication of the mirror module, that must guarantee an Half Energy Width (HEW) better than 20 arcsec from 0.5 up to 30 keV and a goal of 40 arcsec at 60 keV. During the phase A, terminated at the end of 2008, we have developed three engineering models with two, two and three shells, respectively. The most critical aspects in the development of the Simbol-X mirrors are i) the production of the 100 mandrels with very good surface quality within the timeline of the mission, ii) the replication of shells that must be very thin (a factor of 2 thinner than those of XMM-Newton) and still have very good image quality up to 80 keV, iii) the development of an integration process that allows us to integrate these very thin mirrors maintaining their intrinsic good image quality. The Phase A study has shown that we can fabricate the mandrels with the needed quality and that we have developed a valid integration process. The shells that we have produced so far have a quite good image quality, e.g. HEW <~30 arcsec at 30 keV, and effective area. However, we still need to make some improvements to reach the requirements. We will briefly present these results and discuss the possible improvements that we will investigate during phase B.

Development of a "Hydrologic Equivalent Wetland" Concept for Modeling Cumulative Effects of Wetlands on Watershed Hydrology

NASA Astrophysics Data System (ADS)

Wang, X.; Liu, T.; Li, R.; Yang, X.; Duan, L.; Luo, Y.

2012-12-01

Wetlands are one of the most important watershed microtopographic features that affect, in combination rather than individually, hydrologic processes (e.g., routing) and the fate and transport of constituents (e.g., sediment and nutrients). Efforts to conserve existing wetlands and/or to restore lost wetlands require that watershed-level effects of wetlands on water quantity and water quality be quantified. Because monitoring approaches are usually cost or logistics prohibitive at watershed scale, distributed watershed models, such as the Soil and Water Assessment Tool (SWAT), can be a best resort if wetlands can be appropriately represented in the models. However, the exact method that should be used to incorporate wetlands into hydrologic models is the subject of much disagreement in the literature. In addition, there is a serious lack of information about how to model wetland conservation-restoration effects using such kind of integrated modeling approach. The objectives of this study were to: 1) develop a "hydrologic equivalent wetland" (HEW) concept; and 2) demonstrate how to use the HEW concept in SWAT to assess effects of wetland restoration within the Broughton's Creek watershed located in southwestern Manitoba of Canada, and of wetland conservation within the upper portion of the Otter Tail River watershed located in northwestern Minnesota of the United States. The HEWs were defined in terms of six calibrated parameters: the fraction of the subbasin area that drains into wetlands (WET_FR), the volume of water stored in the wetlands when filled to their normal water level (WET_NVOL), the volume of water stored in the wetlands when filled to their maximum water level (WET_MXVOL), the longest tributary channel length in the subbasin (CH_L1), Manning's n value for the tributary channels (CH_N1), and Manning's n value for the main channel (CH_N2). The results indicated that the HEW concept allows the nonlinear functional relations between watershed processes and wetland characteristics (e.g., size and morphology) to be accurately represented in the models. The loss of the first 10 to 20% of the wetlands in the Minnesota study area would drastically increase the peak discharge and loadings of sediment, total phosphorus (TP), and total nitrogen (TN). On the other hand, the justifiable reductions of the peak discharge and loadings of sediment, TP, and TN in the Manitoba study area may require that 50 to 80% of the lost wetlands be restored. Further, the comparison between the predicted restoration and conservation effects revealed that wetland conservation seems to deserve a higher priority while both wetland conservation and restoration may be equally important. Moreover, although SWAT was used in this study, the HEW concept is generic and can also be applied with any other hydrologic models.

Community-Based Interventions for Newborns in Ethiopia (COMBINE): Cost-effectiveness analysis.

PubMed

Mathewos, Bereket; Owen, Helen; Sitrin, Deborah; Cousens, Simon; Degefie, Tedbabe; Wall, Stephen; Bekele, Abeba; Lawn, Joy E; Daviaud, Emmanuelle

2017-10-01

About 87 000 neonates die annually in Ethiopia, with slower progress than for child deaths and 85% of births are at home. As part of a multi-country, standardized economic evaluation, we examine the incremental benefit and costs of providing management of possible serious bacterial infection (PSBI) for newborns at health posts in Ethiopia by Health Extension Workers (HEWs), linked to improved implementation of existing policy for community-based newborn care (Health Extension Programme). The government, with Save the Children/Saving Newborn Lives and John Snow, Inc., undertook a cluster randomized trial. Both trial arms involved improved implementation of the Health Extension Programme. The intervention arm received additional equipment, support and supervision for HEWs to identify and treat PSBI. In 2012, ∼95% of mothers in the study area received at least one pregnancy or postnatal visit in each arm, an average of 5.2 contacts per mother in the intervention arm (4.9 in control). Of all visits, 79% were conducted by volunteer community health workers. HEWs spent around 9% of their time on the programme. The financial cost per mother and newborn was $34 (in 2015 USD) in the intervention arm ($27 in control), economic costs of $37 and $30, respectively. Adding PSBI management at community level was estimated to reduce neonatal mortality after day 1 by 17%, translating to a cost per DALY averted of $223 or 47% of the GDP per capita, a highly cost-effective intervention by WHO thresholds. In a routine situation, the intervention programme cost would represent 0.3% of public health expenditure per capita and 0.5% with additional monthly supervision meetings. A platform wide approach to improved supervision including a dedicated transport budget may be more sustainable than a programme-specific approach. In this context, strengthening the existing HEW package is cost-effective and also avoids costly transfers to health centres/hospitals. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Thin fused silica optics for a high angular resolution and large collecting area X Ray telescope after Chandra

NASA Astrophysics Data System (ADS)

Pareschi, Giovanni; Citterio, Oberto; Civitani, Marta M; Basso, Stefano; Campana, Sergio; Conconi, Paolo; Ghigo, Mauro; Mattaini, Enrico; Moretti, Alberto; Parodi, Giancarlo; Tagliaferri, Gianpiero

2014-08-01

The implementation of an X-ray mission with high imaging capabilities, similar to those achieved with Chandra (<1 arcsec Half Energy Width, HEW), but with a much larger throughput is very attractive, even if challenging. For such a mission the scientific opportunities, in particular for the study of the early Universe, would remain at the state of the art for the next decades. Initially the ESA-led XEUS mission was proposed, with an effective area of several m2 and an angular resolution better than 2 arcsec HEW. Unfortunately, this mission was not implemented, mainly due to the costs and the low level of technology readiness. Currently the most advanced proposal for such a mission is the SMART-X project, led by CfA together with other US institutes. This project is based on adjustable segments of thin foil mirrors with piezo-electric actuators, aiming to achieve an effective area >2 m2 at 1 keV and an angular resolution better than 1 arcsec HEW. Another attractive technology to realize an X-ray telescope with similar characteristics is being developed at NASA/Goddard. In this case the mirrors are based on Si substrates that are super-polished and figured starting from a bulky Si ingot, from which they are properly cut. Here we propose an alternative method based on precise direct grinding, figuring and polishing of thin (a few mm) glass shells with innovative deterministic polishing methods. This is followed by a final correction via ion figuring to obtain the desired accuracy. For this purpose, a temporary stiffening structure is used to support the shell from the polishing operations up to its integration in the telescope supporting structure. This paper deals with the technological process under development, the results achieved so far and some mission scenarios based on this kind of optics, aiming to achieve an effective area more than 10 times larger than Chandra and an angular resolution of 1 arcsec HEW on axis and of a few arcsec off-axis across a large field of view (1o in diameter).

HEW Proposals Open Door for Ms. Jock

ERIC Educational Resources Information Center

Klopfer, Susan

1974-01-01

Discusses the increased demand for women's sports programs as reflected in student publications following the signing of Title 9 of the Education Amendments Act which prohibits sex bias in federally financed education programs. (RB)

The Oral Provocation Test for Raw Egg in Patients with Hen Egg Allergy.

PubMed

Kido, Jun; Nishi, Natsuko; Matsumoto, Tomoaki

2018-06-06

Many researchers have made efforts to develop diagnostic tools for predicting the outcome of oral food challenges (OFCs). The aim of this study was to assess the diagnostic value of the skin prick test (SPT) and blood-specific IgE concentrations based on the outcome of the OFCs for heated and raw hen egg. This study included 103 children with suspected hen egg allergy (HEA; median age 23 months, range 10-155; 72 boys, 31 girls). Forty-three patients were diagnosed with HEA by OFC. Of 60 patients who tolerated heated egg white (HEW), 22 underwent the OFC for raw hen egg and 7 developed adverse reactions after ingesting raw egg. Their wheal diameters and specific IgE levels for egg white and ovomucoid were determined. Wheal diameters as well as blood-specific IgE levels for egg white and ovomucoid were significantly larger in children with positive OFC results for HEW than in those with negative results. However, there were no significant differences between the positive and negative test results for raw hen egg white (REW) in wheal diameter or blood-specific IgE levels. The SPT and blood-specific IgE can be used to diagnose HEA. However, the provocation test for REW in children without HEW allergy is important because the values of SPT and specific IgE were not significantly different between children with and without raw egg allergy. © 2018 S. Karger AG, Basel.

X-ray optical units made of glass: achievements and perspectives

NASA Astrophysics Data System (ADS)

Civitani, M.; Basso, S.; Ghigo, M.; Pareschi, G.; Salmaso, B.; Spiga, D.; Tagliaferri, G.; Vecchi, G.; Burwitz, V.; Hartner, G. D.; Menz, B.

2014-07-01

Future X-ray telescopes with very large collecting area, like the proposed Athena with more than 2 m2 effective area at 1 keV, need to be realized as assemblies of a large number of X-ray optical units, named X-ray Optical Units (XOUs). The Brera Astronomical Observatory (INAF-OAB) is developing a new technology to manufacture these modular elements, compatible with an angular resolution of 5 arcsec HEW (Half-Energy-Width). This technique consists in stacking in a Wolter-I configuration several layers of thin foils of glass, previously formed by direct hot slumping. The achievable global angular resolution of the optics relies on the required surface shape accuracy of slumped foils, on the smoothness of the mirror surfaces and on the correct integration and co-alignment of the mirror segments operated trough a dedicated Integration Machine (IMA). In this paper we provide an overview of the project development, reporting on the very promising results achieved so far, including in-focus full illumination X-ray tests of the prototype (Proof of Concept, POC#2, integrated at the beginning of 2013) for which an HEW of 22.1'' has been measured at Panter/MPE. Moreover we report on the on-going activities, with a new integrated prototype (PoC#3). X-ray test in pencil beam revealed that at least a segment between two external ribs is characterized by an HEW well below 10''. Lastly, the overall process up-grade to go from 20 m to 12m focal length (to be compatible with Athena+ configuration) is presented.

32 CFR 644.483 - Notification of Department of HEW or successor agencies.

Code of Federal Regulations, 2010 CFR

2010-07-01

... not needed for school, classroom, or other educational use or for use in the protection of public health, including research. If within the 20-day period, notice is received of a potential need, the...

Effect of an innovative community based health program on maternal health service utilization in north and south central Ethiopia: a community based cross sectional study.

PubMed

Afework, Mesganaw Fantahun; Admassu, Kesteberhan; Mekonnen, Alemayehu; Hagos, Seifu; Asegid, Meselech; Ahmed, Saifuddin

2014-04-04

Among Millennium Development Goals, achieving the fifth goal (MDG-5) of reducing maternal mortality poses the greatest challenge in Sub-Saharan Africa. Ethiopia has one of the highest maternal mortality ratios in the world with unacceptably low maternal health service utilization. The Government of Ethiopia introduced an innovative community-based intervention as a national strategy under the Health Sector Development Program. This new approach, known as the Health Extension Program, aims to improve access to and equity in essential health services through community based Health Extension Workers. The objective of the study is to assess the role of Health Extension Workers in improving women's utilization of antenatal care, delivery at health facility and postnatal care services. A cross sectional household survey was conducted in early 2012 in two districts of northern and south central parts of Ethiopia. Data were collected from 4949 women who had delivered in the two years preceding the survey. Logistic regression analysis was performed to determine the association between visit by Health Extension Workers during pregnancy and use of maternal health services, controlling for the effect of other confounding factors. The non-adjusted analysis showed that antenatal care attendance at least four times during pregnancy was significantly associated with visit by Health Extension Workers [Odds Ratio 3.46(95% CI 3.07,3.91)], whereas health facility delivery (skilled attendance at birth) was not significantly associated with visit by Health Extension Workers during pregnancy [Odds Ratio 0.87(95% CI 0.25,2.96)]. When adjusted for other factors the association of HEWs visit during pregnancy was weaker for antenatal care attendance [Adjusted Odds Ratio: 1.35(95% CI: 1.05, 1.72)] but positively and significantly associated with health facility delivery [Adjusted Odds Ratio 1.96(1.25,3.06)]. In general HEWs visit during pregnancy improved utilization of maternal health services. Health facility delivery is heavily affected by other factors. Meaningful improvement in skilled attendance at birth (health facility delivery) should include addressing other factors on top of visits by HEWs during pregnancy and specific target oriented interventions during visits by HEWs to support skilled attendance at birth.

32 CFR 644.483 - Notification of Department of HEW or successor agencies.

Code of Federal Regulations, 2012 CFR

2012-07-01

... improvements will be withheld from advertisement for bids for a period of 20 days from the date of the... health, including research. If within the 20-day period, notice is received of a potential need, the...

32 CFR 644.483 - Notification of Department of HEW or successor agencies.

Code of Federal Regulations, 2013 CFR

2013-07-01

... improvements will be withheld from advertisement for bids for a period of 20 days from the date of the... health, including research. If within the 20-day period, notice is received of a potential need, the...

32 CFR 644.483 - Notification of Department of HEW or successor agencies.

Code of Federal Regulations, 2014 CFR

2014-07-01

... improvements will be withheld from advertisement for bids for a period of 20 days from the date of the... health, including research. If within the 20-day period, notice is received of a potential need, the...

32 CFR 644.483 - Notification of Department of HEW or successor agencies.

Code of Federal Regulations, 2011 CFR

2011-07-01

... improvements will be withheld from advertisement for bids for a period of 20 days from the date of the... health, including research. If within the 20-day period, notice is received of a potential need, the...

A Cautious Green Light for Reproductive Studies.

ERIC Educational Resources Information Center

Randal, Judith

1979-01-01

The board that advises the Secretary of HEW on ethics has given a qualified approval for further review of federal funding for research on human embryos conceived in the laboratory. Issues and concerns that influenced the board's decision are addressed. (JMD)

Environmental Pollution, A Selective Bibliography.

ERIC Educational Resources Information Center

Clearinghouse for Federal Scientific and Technical Information, Springfield, VA.

This bibliography on environmental pollution is comprised primarily of reports of federally sponsored research by such departments and agencies as HEW, Interior, AEC, NASA, Defense, Transportation, and others. The reports were selected from Clearinghouse announcement journals during the period 1968 through April 1970. The bibliography contains…

Umbilical cord care in Ethiopia and implications for behavioral change: a qualitative study.

PubMed

Amare, Yared

2014-04-18

Infections account for up to a half of neonatal deaths in low income countries. The umbilicus is a common source of infection in such settings. This qualitative study investigates practices and perspectives related to umbilical cord care in Ethiopia. In-depth interviews (IDI) were conducted in a district in each of the four most populous regions in the country: Oromia, Amhara, Tigray and Southern Nations, Nationalities and Peoples Region (SNNPR). In each district, one community was purposively selected; and in each study community, IDIs were conducted with 6 mothers, 4 grandmothers, 2 Traditional Birth Attendants and 2 Health Extension Workers (HEWs). The two main questions in the interview guide related to cord care were: How was the umbilical cord cut and tied? Was anything applied to the cord stump immediately after cutting/in the first 7 days? Why was it applied/not applied? The study elucidates local cord care practices and the rational for these practices. Concepts underlying cord tying practices were how to stem blood flow and facilitate delivery of the placenta. Substances were applied on the cord to moisturize it, facilitate its separation and promote healing. Locally recognized cord problems were delayed healing, bleeding or swelling. Few respondents reported familiarity with redness of the cord - a sign of infection. Grandmothers, TBAs and HEWs were influential regarding cord care. This study highlights local rationale for cord practices, concerns about cord related problems and recognition of signs of infection. Behavioral change messages aimed at improving cord care including cleansing with CHX should address these local perspectives. It is suggested that HEWs and health facility staff target mothers, grandmothers, TBAs and other community women with messages and counseling.

The X-Ray Optics for the High Angular Resolution Imager (HARI)

NASA Technical Reports Server (NTRS)

Weisskopf, M. C.

2010-01-01

This slide presentation shows the basic parameters of the x-ray optics, the housing,a graph of the effective area vs energy, another graph showing the angular off-set vs HEW, and a series of graphs showing the detector offsets and tilts,

Position Papers on Bilingual Bicultural Educational Manpower Development.

ERIC Educational Resources Information Center

Montal Educational Associates, San Fernando, CA.

Selected by the Division of Manpower Development and Training, U. S. Office of Education (HEW, Washington, D. C.), the Montal Educational Associates conducted a Symposium for Bilingual-Bicultural Educational Manpower Development. The Symposium's purpose was to bring together Spanish Speaking educational and manpower experts from throughout the…

Directions in Substance Abuse Counseling, 2000.

ERIC Educational Resources Information Center

Cohen, Adam W., Ed.

2000-01-01

This volume of six lessons provides expert information on a variety of issues in substance abuse counseling. The lessons, which may be applied toward continuing education credits, are: (1) "Ethics in Substance Abuse Rehabilitation" (Robert L. Hewes); (2) "Addressing the Needs of Clients with Traumatic Injury and Alcoholism"…

Women in Sports, Spring 1977. Sports Kit.

ERIC Educational Resources Information Center

Women's Equity Action League, Washington, DC.

Information concerning the Washington-based Women's Equity Action League (WEAL), its legislative recommendations, and internship program is presented. Excerpts from Title IX sections applying to sport and a memorandum from the Department of Health, Education, and Welfare (HEW) regarding the legal obligations of school officials are included, as…

Ritalin: Education's Fix-It Drug?

ERIC Educational Resources Information Center

Divoky, Diane

1989-01-01

Describes the case of Casey Jesson, a hyperactive child ordered by the state of Hew Hampshire to ingest Ritalin or forego a public education. Despite adverse side effects and the perils of drug dependency, there is greater parental and educator acceptance of Ritalin than ever before. Scientologists are sparking an anti-Ritalin campaign. Includes…

Federal Programs Supporting Lifelong Learning.

ERIC Educational Resources Information Center

Christoffel, Pam, Comp.

Approximately 275 Federal programs support some form of lifelong learning. While the majority of the lifelong learning programs are administered by the various agencies within HEW, a significant number of programs are run by such Federal agencies as the Department of Justice, the National Foundation on the Arts and Humanities, and the Smithsonian…

Parent Education: Bandwagon, Bastard, or Bonafide.

ERIC Educational Resources Information Center

Kerckhoff, Florence G.

The author emphasizes the importance of education for parenthood and recommends such education for both adolescents and adults. In recent years, parenthood education for teenagers has been emphasized at the national level by the Children's Bureau, Office of Child Development, HEW. However, this emphasis is declining and parent education is…

Administrative Action to End Discrimination Based on Handicap: HEW's Section 504 Regulation.

ERIC Educational Resources Information Center

Engebretson, Mark F.

1979-01-01

Examines the drafting of regulations under Section 504 of the Rehabilitation Act of 1973, which prohibits discrimination against handicapped persons by recipients of federal funds. Available from Harvard Legislative Research Bureau, Langdell Hall, Harvard Law School, Cambridge, MA 02138; single copy $4.00. (Author/IRT)

On Campus with Women. Number 20. June 1978.

ERIC Educational Resources Information Center

Association of American Colleges, Washington, DC. Project on the Status and Education of Women.

The contents of this newsletter concern affirmative action and employment, education of women, women's studies, Title IX; medicine, sports, and international news. The following news items are included: increased part-time careers in academe, the status of women faculty in academe, new decisions on sex discrimination, HEW investigations of major…

Program Information and Application Procedures, Fiscal Year 1977. The Comprehensive Program.

ERIC Educational Resources Information Center

Fund for the Improvement of Postsecondary Education (DHEW), Washington, DC.

The Fund for the Improvement of Postsecondary Education, a separate organizational unit within HEW, is a grant-making organization that covers the entire range of postsecondary education and that funds policy-oriented and feasibility studies directly related to reform, innovation, and improvement. Directions for improvement are outlined in this…

Thesaurus/Glossary System. User's Guide. Improved Systems for Managing the Control of Paperwork.

ERIC Educational Resources Information Center

Hurley, Jeanne S.; And Others

Intended primarily for the use of NCES (National Center for Education Statistics) staff, this document contains installation-specific information for the Thesaurus/Glossary computer system as installed at the HEW (Health, Education and Welfare) Data Management Center. The first of three sections provides an overview of system objectives,…

Education Act Extends Sex Discrimination and Minimum Wage Provisions. Legislative Series 2.

ERIC Educational Resources Information Center

Employment Standards Administration (DOL), Washington, DC. Women's Bureau.

This brief presents highlights from the recently enacted Education Amendments which include comprehensive higher education provisions, authorization for greatly increased funding, and limitations on court-ordered busing. The act also establishes within HEW a National Institute of Education, whose prime purpose is to find ways to make educational…

Program Evaluation at HEW: Research versus Reality. Part 2: Education.

ERIC Educational Resources Information Center

Abert, James G., Ed.

Intended for both the student and the practitioner of evaluation, this book describes the state of the practice of program evaluation. Its focus is mainly institutional. Results of evaluation studies are of secondary importance. An introductory chapter written by the editor discusses evaluation at the Office of Education from 1967 through 1973.…

Special Report on Dental Care for Handicapped People.

ERIC Educational Resources Information Center

Rehabilitation Services Administration (DHEW), Washington, DC.

The document presents a Department of Health, Education and Welfare (HEW) special report on dental care for the handicapped. The nature and extent of the problem of providing dental services to the handicapped population is examined. The handicapped population is defined and their oral health status reviewed. Factors contributing to the poor oral…

[Use of satellites for public health purposes in tropical areas].

PubMed

Meynard, J B; Orlandi, E; Rogier, C; Sbai Idrissi, K; Deparis, X; Peyreffite, C; Lightburn, E; Malosse, D; Migliani, R; Spiegel, A; Boutin, J P

2003-01-01

The epidemiological hallmark of the new millennium has been the emergence or recrudescence of transmissible diseases with high epidemic potential. Disease tracking is becoming an increasingly global task requiring implementation of more and more sophisticated control strategies and facilities for sustainable development. A promising initiative involves the use of satellite technology to monitor and forecast the spread of disease. The Health Early Warning System (HEWS) was designed based on successful application of satellite data in food programs as well as in other areas (e.g. weather, farming and fishing). The HEWS integrates data from communications, remote-sensing and positioning satellites. The purpose of this review is to present the main studies containing satellite data on public health in tropical areas. Satellite data has allowed development of more reactive epidemiological tracking networks better suited to increasing population mobility, correlation of environmental factors (vegetation index, rainfall and ocean surface color) with human, animal and insect factors in epidemiological studies and assessment of the role of such factors in the development or reappearance of disease. Satellite technology holds great promise for more efficient management of public health problems in tropical areas.

Simulated wetland conservation-restoration effects on water quantity and quality at watershed scale.

PubMed

Wang, Xixi; Shang, Shiyou; Qu, Zhongyi; Liu, Tingxi; Melesse, Assefa M; Yang, Wanhong

2010-07-01

Wetlands are one of the most important watershed microtopographic features that affect hydrologic processes (e.g., routing) and the fate and transport of constituents (e.g., sediment and nutrients). Efforts to conserve existing wetlands and/or to restore lost wetlands require that watershed-level effects of wetlands on water quantity and water quality be quantified. Because monitoring approaches are usually cost or logistics prohibitive at watershed scale, distributed watershed models such as the Soil and Water Assessment Tool (SWAT), enhanced by the hydrologic equivalent wetland (HEW) concept developed by Wang [Wang, X., Yang, W., Melesse, A.M., 2008. Using hydrologic equivalent wetland concept within SWAT to estimate streamflow in watersheds with numerous wetlands. Trans. ASABE 51 (1), 55-72.], can be a best resort. However, there is a serious lack of information about simulated effects using this kind of integrated modeling approach. The objective of this study was to use the HEW concept in SWAT to assess effects of wetland restoration within the Broughton's Creek watershed located in southwestern Manitoba, and of wetland conservation within the upper portion of the Otter Tail River watershed located in northwestern Minnesota. The results indicated that the HEW concept allows the nonlinear functional relations between watershed processes and wetland characteristics (e.g., size and morphology) to be accurately represented in the models. The loss of the first 10-20% of the wetlands in the Minnesota study area would drastically increase the peak discharge and loadings of sediment, total phosphorus (TP), and total nitrogen (TN). On the other hand, the justifiable reductions of the peak discharge and loadings of sediment, TP, and TN in the Manitoba study area may require that 50-80% of the lost wetlands be restored. Further, the comparison between the predicted restoration and conservation effects revealed that wetland conservation seems to deserve a higher priority while both wetland conservation and restoration may be equally important. Copyright 2010 Elsevier Ltd. All rights reserved.

An Exploratory Study of Women in the Health Professions Schools. Volume VII: Women in Podiatry.

ERIC Educational Resources Information Center

Urban and Rural Systems Associates, San Francisco, CA.

In an exploratory study conducted for the Women's Action Program of HEW, the aims were to identify and explore the barriers to success that women face as MODVOPPP (Medicine, Osteopathic medicine, Dentistry, Veterinary medicine, Optometry, Podiatry, Pharmacy, and Public health) school applicants and students, and to describe the discrimination…

An Exploratory Study of Women in the Health Professions Schools: Volume VIII: Women in Pharmacy.

ERIC Educational Resources Information Center

Urban and Rural Systems Associates, San Francisco, CA.

In an exploratory study conducted for the Women's Action Program of HEW, the aims were to identify and explore the barriers to success that women face as MODVOPPP (Medicine, Osteopathic medicine, Dentistry, Veterinary medicine, Optometry, Podiatry, Pharmacy, and Public health) school applicants and students and to describe the discrimination…

An Exploratory Study of Women in the Health Professions Schools. Volume VI: Women in Optometry.

ERIC Educational Resources Information Center

Urban and Rural Systems Associates, San Francisco, CA.

In an exploratory study conducted for the Women's Action Program of HEW, the aims were to identify and explore the barriers to success that women face as MODVOPPP (Medicine, Osteopathic medicine, Dentistry, Veterinary medicine, Optometry, Podiatry, Pharmacy, and Public health) school applicants and students and to describe the discrimination…

The Role of Gatekeepers in the Asbestos Awareness Campaign.

ERIC Educational Resources Information Center

Freimuth, Vicki S.; Van Nevel, J. Paul

The role of news media as gatekeepers controlling the flow of information that the public receives was explored during the 1978 Asbestos Awareness campaign conducted by the Department of Health, Education, and Welfare (HEW). In an effort to inform high risk workers and the general public about the health hazards associated with asbestos exposure,…

Initial Development of Criteria for Assessing Quality of Medical Care.

ERIC Educational Resources Information Center

Ironside, Roderick A.

In 1969, the Medical School of the University of Puerto Rico (UPR) received a grant from the National Center for Health Services Research and Development (Public Health Service, HEW) to plan and conduct--as a demonstration project--a special retraining program for physicians who had failed to approve the licensure examinations of the Puerto Rico…

Implementing Title IX. ACSA School Management Digest, Series 1, Number 8. ERIC/CEM Research Analysis Series, Number 35.

ERIC Educational Resources Information Center

Mazzarella, Jo Ann

Title IX of the Education Amendments of 1972 and the HEW implementing regulations cover two major areas: sex discrimination in school courses, athletics, extracurricular activities, employment, and counseling, and sex descrimination in hiring, promotions, and benefits for school personnel. The author of this review examines the progress (and lack…

Results of the Boulder Consultation: The Beginnings of a Technical Assistance Program for the Office of Environmental Education/USOE/HEW.

ERIC Educational Resources Information Center

Office of Education (DHEW), Washington, DC. Office of Environmental Education.

In December 1977, the Office of Environmental Education (OEE) brought its fiscal year '77 grant recipients together in Boulder, Colorado, for a technical assistance consultation. The technical assistance responsibilities of OEE are mandated by the Environmental Education Act. Until this consultation, OEE had been giving its technical assistance on…

Summary and Recommendations: Conference on Pacific/Asian American Families and HEW-Related Issues.

ERIC Educational Resources Information Center

J W K International Corp., Annandale, VA.

The socioeconomic needs of Pacific and Asian American (PAA) families and Department of Health, Education, and Welfare programs having the most impact on the lives of PAAs are analyzed in this conference report. An overall outline of the conference proceedings, as well as reprints of all charts and papers presented, are included. The findings of…

Growth Patterns and E-Moderating Supports in Asynchronous Online Discussions in an Undergraduate Blended Course

ERIC Educational Resources Information Center

Ghadirian, Hajar; Ayub, Ahmad Fauzi Mohd; Bakar, Kamariah Binti Abu; Hassanzadeh, Maryam

2016-01-01

This study presents a case study of asynchronous online discussions' (AOD) growth patterns in an undergraduate blended course to address the gap in our current understanding of how threads are developed in peer-moderated AODs. Building on a taxonomy of thread pattern proposed by Chan, Hew and Cheung (2009), growth patterns of thirty-six forums…

Academic Writing in Context: Implications and Applications. Papers in Honour of Tony Dudley-Evans.

ERIC Educational Resources Information Center

Hewings, Martin, Ed.

The papers in this volume were collected to honor T. Dudley-Evans on his retirement from the University of Birmingham. They explore a number of themes of current interest to those engaged in English language teaching and academic writing. The papers are: (1) Introduction (Martin Hewings); (2) Distance and Refined Selves: Educational Tensions in…

The HEW Review of Educational Services to New York's Minority Children

ERIC Educational Resources Information Center

Gerry, Martin

1975-01-01

Testimony before a public hearing of the New York City Commission on Human Rights in May 1974 by the project director of a projected in-depth review of the delivery of educational services to over 700,000 minority children attending the New York City Public School system asserted to be the largest civil rights review of its kind in U.S. history.…

Workshop on Sex Bias and Sex Fairness in Career Interest Inventories. Report of Proceedings, March 6-8, 1974.

ERIC Educational Resources Information Center

Crump, Carol B., Ed.

This document contains abstracts of papers from a workshop resulting from events stemming from the Office of Education report, A Look at Women in Education: Issues and Answers for HEW. This report charged that a particular career interest inventory was sex-biased, but no operational definition of sex bias was given, the issues involved were not…

Predicting Gang Fight Participation in a General Youth Sample via the HEW Youth Development Model's Community Program Impact Scales, Age, and Sex.

ERIC Educational Resources Information Center

Truckenmiller, James L.

The accurate prediction of violence has been in the spotlight of critical concern in recent years. To investigate the relative predictive power of peer pressure, youth perceived negative labeling, youth perceived access to educational and occupational roles, social alienation, self-esteem, sex, and age with regard to gang fight participation…

Federal Funding of R & D Programs for Women's Educational Equity: Possible Sources in the Department of Labor and Other Agencies Outside HEW.

ERIC Educational Resources Information Center

Herman, Alexis M.

There is a great need to examine factors limiting educational opportunities of women, especially minority and low income women. Thus, it is important to identify funding sources for research and development programs which enhance women's educational equity. Possible funding sources include the Department of Labor and other federal programs. In the…

Foxfire 4: Fiddle Making, Springhouses, Horse Trading, Sassafras Tea, Berry Buckets, Gardening, and Further Affairs of Plain Living.

ERIC Educational Resources Information Center

Wigginton, Eliot, Ed.

Planting by the signs of the moon, well digging, hewing logs, wood carving, knife making, bird trapping, and horsetrading are but a few of the aspects of Appalachian culture explored in "Foxfire 4." Like its predecessors, the volume was compiled by high school students at Rabun Gap-Nacoochee School. Information on the cultural heritage…

Evaluation of Street Projects for the Spanish Speaking. Findings, Conclusions, Recommendations. Volume II of a Two-Volume Report.

ERIC Educational Resources Information Center

Vasquez Associates Ltd., Milwaukee, WI.

Nine Street Projects designed for the Spanish speaking and funded by Region V of the Department of Health, Education and Welfare (HEW) are examined here. They were: the El Hogar del Nino Day Care Center, Spanish-American Day Care Center, United Migrant Opportunity Services' Bilingual/Bicultural Early Childhood Center, Youth Services at El Centro…

Electric Field Distortion in Electro-Optical Devices Subjected to Ionizing Radiation.

DTIC Science & Technology

1983-12-26

applies- ties of scientif ic advances to nam military spae system . Versatilty and flaxibility hews beon developed to a high degree by the lehoratory...personel In deeling with the many problems encountered ina the nation’s rapidly dsvelopnas space system . 1expertise In the latest scientific developments is...desiga, distributed architectures for spacoerne m o putars, fault-tolerant c.speter system , artificia intelligence. end microelectronics applications

Ordinary Americans: U.S. History through the Eyes of Everyday People [and] Teacher's Guide.

ERIC Educational Resources Information Center

Monk, Linda R., Ed.

"Ordinary Americans" covers 500 years of U.S. history, from 1492 to 1992, in almost 200 readings, plus scores of archival photographs. The book relates the traditional events of U.S. history, but as an ordinary person lived it. Thus, the story of the Boston Tea Party is told not by Samuel Adams, but by George Hewes, a cobbler. The story of the…

Preventing Mental Retardation--More Can Be Done: Report to the Congress by the Comptroller General of the United States.

ERIC Educational Resources Information Center

Comptroller General of the U.S., Washington, DC.

Presented is a report on the current status of implementation of the Presidential goal (made in 1971) to reduce by half the incidence of mental retardation by the end of this century. Major conclusions are as follows: no major agency of the Department of Health, Education, and Welfare (HEW) has been made responsible for seeing that the goal is put…

Assessment of the Principal Needs of the Spanish Speaking in Chicago. Findings, Conclusions, and Recommendations. Volume I of a Two-Volume Report.

ERIC Educational Resources Information Center

Vasquez Associates Ltd., Milwaukee, WI.

The main portion of this study is devoted to the determination of needs for health, education and social welfare services of the Spanish speaking in Chicago, and to draw inferences about the degree to which Department of Health, Education and Welfare (HEW) funds and services in Chicago are reaching this specific minority and the extent to which…

Crowd Sourcing Data Collection through Amazon Mechanical Turk

DTIC Science & Technology

2013-09-01

The first recognition study consisted of a Panel Study using a simple detection protocol, in which participants were presented with vignettes and, for...variability than the crowdsourcing data set, hewing more closely to the year 1 verbs of interest and simple description grammar . The DT:PS data were...Study RT: PS Recognition Task: Panel Study RT: RT Recognition Task: Round Table S3 Amazon Simple Storage Service SVPA Single Verb Present /Absent

Student Financial Assistance Programs. Hearings Before a Subcommittee of the Committee on Government Operations, House of Representatives, Ninety-Fifth Congress, Second Session. July 27; August 3; and October 5, 1978.

ERIC Educational Resources Information Center

Congress of the U. S., Washington, DC. House Committee on Government Operations.

Three hearings held before the U.S. House of Representatives on student financial assistance programs were concerned with the manner in which the Office of Education's assistance programs were being administered, the extent and nature of fraud, waste and abuse, and the progress of the Department of Health, Education, and Welfare's (HEW) corrective…

History of the Army Nuclear Test Personnel Review (ANTPR).

DTIC Science & Technology

1987-09-01

weM S HISTORY OF THE AMR NUCLEAR TEST PERSONNEL REVIEW 1/1 CUITPR)(U) ARMY AMP JOINT SERVICES ENVIRONENTAL SUPPORT GROUP IMSHINSTON DC SEP 6...participants. 7 Apri 1978 VA issued Circular 10-78-69 authorizing physical examinations for nuclear test participants. 9fMay 1978 The White House directed HEW...testified at a hearing held by the Subcommittee of the House Committee on Government Operations. They discussed DOD re- search to identify participants in

Legislation to regulate medical devices.

PubMed

Harris, M

1975-01-01

The history of medical device regulation began with the need to rid the marketplace of bogus inventions which were either harmful in themselves or harmful because they delayed meaningful treatment of illness. Since World War II, sophistication in medical technology and development of electronic and other types of medical devices has created a new need for regulation of safety and performance of devices used to cure and mitigate disease in man. The 1938 amendments to the Food, Drug, and Cosmetic Act gave FDA authority over labeling and advertising of devices, enforceable only after devices were marketed. In 1969 a study by an HEW commission documented the need for further legislation. The commission recommended three categories of medical devices: those requiring premarket clearance or scientific review, those for which standards could be established to protect the public, and those which are generally recognized as safe and for which nor standards would be necessary. In 1974 the Senate unanimously approved Senator Kennedy's "Medical Device Amendments of 1973" legislation which fulfills the recommendations of the HEW commission report. The House of Representatives failed to pass their version of the legislation in the 93rd Congress. Senator Kennedy re-introduced the bill in the 94th Congress and it passed the Senate in April 1975. Representative Rogers re-introduced an amended bill. The bill is expected to become law in 1975.

Time and Temperature Conditions during Product Flow and Sensory Quality of Potato Salad Prepared in a Conventional Foodservice System.

DTIC Science & Technology

1983-01-01

potentially hazardous food requiring refrigeration should be cooled rapidly to an internal temperature of 450F or below so that the cooling period...does not exceed four hours; (c) potentially hazardous food to be served chilled should be kept at an internal temperature of 450F or below during...display and service (HEW, 1978). Potentially hazardous food - any food that consists in whole or in part of milk or milk products, eggs, meat, poultry

NASA Day at the Capitol

NASA Image and Video Library

2009-02-19

Stennis Space Center leaders and guests visit with Mississippi Senate members in chambers during NASA Day at the Capitol events in Jackson on Feb. 19. Standing at the Senate podium (rear) is Mississippi Lt. Gov. Phil Bryant. Standing at the lectern below are (l to r): Sen. David Baria, D-Bay St. Louis; Partners for Stennis Chair Clay Wagner; NASA Shared Services Center Director Rick Arbuthnot; astronaut Rex Walheim; Stennis Space Center Director Gene Goldman; President Pro Tempore Billy Hewes, R-Gulfport; Sen. Ezell Lee, D-Picayune; and Sen. Tommy Gollott, R-Biloxi.

Molecular and Metallic Hydrogen

DTIC Science & Technology

1977-05-01

ANO ADDRESS IL PR09RAM 91.ME XT. CH ~1 The Rand Corporation 1700 Main Street Santa Monica, Ca. .90406 It. CONTROLLING OFFICE NAME AND ADDRE~SS Defense...VOLUME DATA OF STEWART FOR MOLECULAR HYDROGEN P V/V P V/V (bar) o(_ark . 0 1000 3923 0.632 196.1 0.928 5884 0.583 392.2 0.883 7845 0.549 588.4 0.847...will not a *ieve metailic-like densities despite possib* M tbar pressures because, as the result of shock hew, tng, m.’ ch of the pressure is thermal and

Two-way time transfers between NRC/NBS and NRC/USNO via the Hermes (CTS) satellite

NASA Technical Reports Server (NTRS)

Costain, C. C.; Daams, H.; Boulanger, J. S.; Hanson, D. W.; Klepczynski, W. J.

1978-01-01

At each station the differences were measured between the local UTC seconds pulse and the remote UTC pulse received by satellite. The difference between the readings, if station delays are assumed to be symmetrical, is two times the difference between the clocks at the two ground station sites. Over a 20-minute period, the precision over the satellite is better than 1 ns. The time transfer from NRC to the CRC satellite terminal near Ottawa and from NBS to the Denver HEW terminal was examined.

Wave Propagation and Dynamics of Lattice Structures.

DTIC Science & Technology

1984-05-01

Progress in Solid Mechanics, North Holand Publishing Company, Amsterdam, 1960. [7) Y. K. Linn, and T. J. McDaniel, ’n)amics of Beam Type Periodic...deformation. -99- APPENDIX F FREQUENCY RESPONSE AND IMPULSE RESPONSE FUNCTIONS FOR LONGITUDINAL VIBRATION IN AN ELASTIC ROD Figure F1 shows the elastic rod to b...6 (F38) Rearranging eqn. (F38), .HE(w) = e’ 4e~3 ~e e 2 e1" +e " 6 e r (F39) Mlultiplying eqn. ( F1 =39) by 6Ŕ 6- and aragn te - . e 6 -e _ aix

Oversight Hearing on HEW Enforcement of School-Related Civil Rights Problems, 1975. Hearing Before the Subcommittee on Education of the Committee on Labor and Public Welfare United States Senate, Ninety-fourth Congress. First Session on Examination of the Administration and Enforcement of the Civil Rights Act in the Elementary and Secondary Areas of Education.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Senate Committee on Labor and Public Welfare.

This volume of hearings before the Sub-committee on Education of the Committee on Labor and Public Welfare, United States Senate, is organized into three sections, the contents of which are as follows: Section One comprises the testimony of four witnesses before the Committee; Director Office for Civil Rights, Department of Health, Education and…

Data acquisition of neutron crystallography on tetragonal and triclinic forms of hen-egg-white (HEW) lysozyme with an elastically bent Si monochromator

NASA Astrophysics Data System (ADS)

Tanaka, I.; Minezaki, Y.; Harada, K.; Niimura, N.

An elastically bent silicon (EBSi) as a monochromator has been optimized for neutron diffractometers of biocrystallography. It was found that several stacked thin Si plates were easier to be bent much for the near focusing point and they increased neutron reflectivity by aligning the plates. Currently, an EBSi(1 1 1) monochromator system was equipped at a diffractometer (BIX-I). It took 50 days to collect about 12 000 reflections of hen-egg-white lysozyme. The minimum d-spacing was 2.1 Å.

Simulation and modeling of silicon pore optics for the ATHENA x-ray telescope

NASA Astrophysics Data System (ADS)

Spiga, D.; Christensen, F. E.; Bavdaz, M.; Civitani, M. M.; Conconi, P.; Della Monica Ferreira, D.; Knudsen, E. B.; Massahi, S.; Pareschi, G.; Salmaso, B.; Shortt, B.; Tayabaly, K.; Westergaard, N. J.; Wille, E.

2016-07-01

The ATHENA X-ray observatory is a large-class ESA approved mission, with launch scheduled in 2028. The technology of silicon pore optics (SPO) was selected as baseline to assemble ATHENA's optic with more than 1000 mirror modules, obtained by stacking wedged and ribbed silicon wafer plates onto silicon mandrels to form the Wolter-I configuration. Even if the current baseline design fulfills the required effective area of 2 m2 at 1 keV on-axis, alternative design solutions, e.g., privileging the field of view or the off-axis angular resolution, are also possible. Moreover, the stringent requirement of a 5 arcsec HEW angular resolution at 1 keV entails very small profile errors and excellent surface smoothness, as well as a precise alignment of the 1000 mirror modules to avoid imaging degradation and effective area loss. Finally, the stray light issue has to be kept under control. In this paper we show the preliminary results of simulations of optical systems based on SPO for the ATHENA X-ray telescope, from pore to telescope level, carried out at INAF/OAB and DTU Space under ESA contract. We show ray-tracing results, including assessment of the misalignments of mirror modules and the impact of stray light. We also deal with a detailed description of diffractive effects expected in an SPO module from UV light, where the aperture diffraction prevails, to X-rays where the surface diffraction plays a major role. Finally, we analyze the results of X-ray tests performed at the BESSY synchrotron, we compare them with surface finishing measurements, and we estimate the expected HEW degradation caused by the X-ray scattering.

Long lasting insecticidal net use and its associated factors in Limmu Seka District, South West Ethiopia.

PubMed

Hambisa, Mitiku Teshome; Debela, Tessema; Dessie, Yadeta; Gobena, Tesfaye

2018-01-10

Many countries in sub-Saharan Africa, including Ethiopia, are focusing on the distribution of Long Lasting Insecticidal Nets (LLINs) to combat malaria. However, utilization of the LLIN is low when compared with LLIN possession because of various factors. This study was conducted to measure the actual LLIN usage and identify factors associated with its utilization in Limmu Seka District, South West Ethiopia. A community based cross-sectional survey was conducted among 830 households from December 25, 2011 to February 29, 2012. A total of 830 households were selected by stratified systematic sampling and surveyed. Ninety percent of those surveyed owned LLINs and 68.3% reported that someone had slept under the net on the night prior to the survey. The factors associated with LLIN usage were knowledge of the mode of malaria transmission (AOR; 0.086, 95% CI 0.03, 0.24), the preferred conical shapes of the LLIN (AOR; 1.6, 95% CI 1.31, 4.1), receiving information about their use from Health Extension Workers (HEWs) (AOR; 2.4, 95% CI 1.5, 3.9), hearing media campaigns (AOR; 3.2 95% CI 3.5, 9.2), education at a health facility (AOR; 2 95% CI 1.5, 3.9) or having a family size of three or less (AOR; 2.1, 95% CI 1.3, 3.5). Although ownership of Long Lasting Insecticidal Nets was high at 90%, the actual usage of LLIN was low, and not all family members were protected. Promoting the usage of LLINs utilization by those at most risk, especially the conical shaped ones, through intensified health education using HEWs and mass media campaigns at all health facilities, schools and communities will improve LLIN utilization.

A qualitative exploration of care-seeking pathways for sick children in the rural Oromia region of Ethiopia.

PubMed

Shaw, Bryan; Amouzou, Agbessi; Miller, Nathan P; Bryce, Jennifer; Surkan, Pamela J

2017-03-09

Ethiopia has experienced rapid improvements in its healthcare infrastructure, such as through the recent scale up of integrated community case management (iCCM) delivered by community-based health extension workers (HEWs) targeting children under the age of five. Despite notable improvements in child outcomes, the use of HEWs delivering iCCM remains very low. The aim of our study was to explain this phenomenon by examining care-seeking practices and treatment for sick children in two rural districts in the Oromia Region of Ethiopia. Using qualitative methods, we explored perceptions of child illness, influences on decision-making processes occurring over the course of a child's illness and caregiver perceptions of available community-based sources of child illness care. Sixteen focus group discussions (FGDs) and 40 in-depth interviews (IDIs) were held with mothers of children under age five. For additional perspective, 16 IDIs were conducted fathers and 22 IDIs with health extension workers and community health volunteers. Caregivers often described the act of care-seeking for a sick child as a time of considerable uncertainty. In particular, mothers of sick children described the cultural, social and community-based resources available to minimize this uncertainty as well as constraints and strategies for accessing these resources in order to receive treatment for a sick child. The level of trust and familiarity were the most common dynamics noted as influencing care-seeking strategies; trust in biomedical and government providers was often low. Overall, our research highlights the multiple and dynamic influences on care-seeking for sick children in rural Ethiopia. An understanding of these influences is critical for the success of existing and future health interventions and continued improvement of child health in Ethiopia.

Confocal Raman study of aging process in diabetes mellitus human voluntaries

NASA Astrophysics Data System (ADS)

Pereira, Liliane; Téllez Soto, Claudio Alberto; dos Santos, Laurita; Ali, Syed Mohammed; Fávero, Priscila Pereira; Martin, Airton A.

2015-06-01

Accumulation of AGEs [Advanced Glycation End - products] occurs slowly during the human aging process. However, its formation is accelerated in the presence of diabetes mellitus. In this paper, we perform a noninvasive analysis of glycation effect on human skin by in vivo confocal Raman spectroscopy. This technique uses a laser of 785 nm as excitation source and, by the inelastic scattering of light, it is possible to obtain information about the biochemical composition of the skin. Our aim in this work was to characterize the aging process resulting from the glycation process in a group of 10 Health Elderly Women (HEW) and 10 Diabetic Elderly Women (DEW). The Raman data were collected from the dermis at a depth of 70-130 microns. Through the theory of functional density (DFT) the bands positions of hydroxyproline, proline and AGEs (pentosidine and glucosepane) were calculated by using Gaussian 0.9 software. A molecular interpretation of changes in type I collagen was performed by the changes in the vibrational modes of the proline (P) and hydroxyproline (HP). The data analysis shows that the aging effects caused by glycation of proteins degrades type I collagen differently and leads to accelerated aging process.

Science requirements and optimization of the silicon pore optics design for the Athena mirror

NASA Astrophysics Data System (ADS)

Willingale, R.; Pareschi, G.; Christensen, F.; den Herder, J.-W.; Ferreira, D.; Jakobsen, A.; Ackermann, M.; Collon, M.; Bavdaz, M.

2014-07-01

The science requirements for the Athena X-ray mirror are to provide a collecting area of 2 m2 at 1 keV, an angular resolution of ~5 arc seconds half energy eidth (HEW) and a field of view of diameter 40-50 arc minutes. This combination of area and angular resolution over a wide field are possible because of unique features of the Silicon pore optics (SPO) technology used. Here we describe the optimization and modifications of the SPO technology required to achieve the Athena mirror specification and demonstrate how the optical design of the mirror system impacts on the scientific performance of Athena.

Enhancement of crystal homogeneity of protein crystals under application of an external alternating current electric field

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koizumi, H.; Uda, S.; Fujiwara, K.

X-ray diffraction rocking-curve measurements were performed on tetragonal hen egg white (HEW) lysozyme crystals grown with and without the application of an external alternating current (AC) electric field. The crystal quality was assessed by the full width at half maximum (FWHM) value for each rocking curve. For two-dimensional maps of the FWHMs measured on the 440 and the 12 12 0 reflection, the crystal homogeneity was improved under application of an external electric field at 1 MHz, compared with that without. In particular, the significant improvement of the crystal homogeneity was observed for the 12 12 0 reflection.

A discrete choice experiment to determine facility-based delivery services desired by women and men in rural Ethiopia

PubMed Central

Beam, Nancy K; Bekele Dadi, Gezehegn; Rankin, Sally H; Weiss, Sandra; Cooper, Bruce; Thompson, Lisa M

2018-01-01

Objectives Despite global efforts to increase facility-based delivery (FBD), 90% of women in rural Ethiopia deliver at home without a skilled birth attendant. Men have an important role in increasing FBD due to their decision-making power, but this is largely unexplored. This study aimed to determine the FBD care attributes preferred by women and men, and whether poverty or household decision-making are associated with choice to deliver in a facility. Setting and participants We conducted a cross-sectional discrete choice experiment in 109 randomly selected households in rural Ethiopia in September–October 2015. We interviewed women who were pregnant or who had a child <2 years old and their male partners. Results Both women and men preferred health facilities where medications and supplies were available (OR=3.08; 95% CI 2.03 to 4.67 and OR=2.68; 95% CI 1.79 to 4.02, respectively), a support person was allowed in the delivery room (OR=1.69; 95% CI 1.37 to 2.07 and OR=1.74; 95% CI 1.42 to 2.14, respectively) and delivery cost was low (OR=1.15 95% CI 1.12 to 1.18 and OR=1.14; 95% CI 1.11 to 1.17, respectively). Women valued free ambulance service (OR=1.37; 95% CI 1.09 to 1.70), while men favoured nearby facilities (OR=1.09; 95% CI 1.06 to 1.13) with friendly providers (OR=1.30; 95% CI 1.03 to 1.64). Provider preferences were complex. Neither women nor men preferred female doctors to health extension workers (HEW) (OR=0.92; 95% CI 0.59 to 1.42 and OR=0.74; 95% CI 0.47 to 1.14, respectively), male doctors to HEW (OR=1.33; 95% CI 0.89 to 1.99 and OR=0.75; 95% CI 0.50 to 1.12, respectively) or female over male nurses (OR=0.68; 95% CI 0.94 to 1.71 and OR=1.03; 95% CI 0.77 to 2.94, respectively). While both women and men preferred male nurses to HEW (OR=1.86; 95% CI 1.23 to 2.80 and OR=1.95; 95% CI 1.30 to 2.95, respectively), men (OR=1.89; 95% CI 1.29 to 2.78), but not women (OR=1.47; 95% CI 1.00 to 2.13) preferred HEW to female nurses. Both women and men preferred female doctors to male nurses (OR=1.71; 95% CI 1.27 to 2.29 and OR=1.44; 95% CI 1.07 to 1.92, respectively), male doctors to female nurses (OR=1.95; 95% CI 1.44 to 2.62 and OR=1.41; 95% CI 1.05 to 1.90, respectively) and male doctors to male nurses (OR=2.47; 95% CI 1.84 to 3.32 and OR=1.46; 95% CI 1.09 to 1.95, respectively), while only women preferred male doctors to female doctors (OR=1.45; 95% CI 1.09 to 1.93 and OR=1.01; 95% CI 0.76 to 1.35, respectively) and only men preferred female nurses to female doctors (OR=1.34; 95% CI 0.98 to 1.84 and OR=1.39; 95% CI 1.02 to 1.89, respectively). Men were disproportionately involved in making household decisions (X2 (1, n=216)=72.18, p<0.001), including decisions to seek healthcare (X2 (1, n=216)=55.39, p<0.001), yet men were often unaware of their partners’ prenatal care attendance (X2 (1, n=215)=82.59, p<0.001). Conclusion Women’s and men’s preferences may influence delivery service choices. Considering these choices is one way the Ethiopian government and health facilities may encourage FBD in rural areas. PMID:29615441

Early Homo and the role of the genus in paleoanthropology.

PubMed

Villmoare, Brian

2018-01-01

The history of the discovery of early fossils attributed to the genus Homo has been contentious, with scholars disagreeing over the generic assignment of fossils proposed as members of our genus. In this manuscript I review the history of discovery and debate over early Homo and evaluate the various taxonomic hypotheses for the genus. To get a sense of how hominin taxonomy compares to taxonomic practice outside paleoanthropology, I compare the diversity of Homo to genera in other vertebrate clades. Finally, I propose a taxonomic model that hews closely to current models for hominin phylogeny and is consistent with taxonomic practice across evolutionary biology. © 2018 American Association of Physical Anthropologists.

Grazing incidence metal optics for the Berkeley Extreme Ultraviolet Explorer satellite - A progress report

NASA Technical Reports Server (NTRS)

Finley, D.; Malina, R. F.; Bowyer, S.

1985-01-01

The four flight Wolter-Schwarzschild mirrors currently under fabrication for the Extreme Ultraviolet Explorer (EUVE) satellite are described. The principal figuring operation of these grazing incidence metal mirrors (gold over nickel on an aluminum substrate) is carried out by diamond turning at the Lawrence Livermore National Laboratories. Turning has been accomplished and optical testing results analyzed for three of the mirrors. As-turned values of 1.7 arc sec full width at half maximum (FWHM) and half energy width (HEW) of 5 arc seconds in the visible have been achieved. These results illustrate the great potential of precision fabrication technology for the production of large grazing incidence optics.

Manufacturing and testing a thin glass mirror shell with piezoelectric active control

NASA Astrophysics Data System (ADS)

Spiga, D.; Barbera, M.; Collura, A.; Basso, S.; Candia, R.; Civitani, M.; Di Bella, M.; Di Cicca, G.; Lo Cicero, U.; Lullo, G.; Pelliciari, C.; Riva, M.; Salmaso, B.; Sciortino, L.; Varisco, S.

2015-09-01

Optics for future X-ray telescopes will be characterized by very large aperture and focal length, and will be made of lightweight materials like glass or silicon in order to keep the total mass within acceptable limits. Optical modules based on thin slumped glass foils are being developed at various institutes, aiming at improving the angular resolution to a few arcsec HEW. Thin mirrors are prone to deform, so they require a careful integration to avoid deformations and even correct forming errors. On the other hand, this offers the opportunity to actively correct the residual deformation: a viable possibility to improve the mirror figure is the application of piezoelectric actuators onto the non-optical side of the mirrors, and several groups are already at work on this approach. The concept we are developing consists of actively integrating thin glass foils with piezoelectric patches, fed by voltages driven by the feedback provided by X-rays. The actuators are commercial components, while the tension signals are carried by a printed circuit obtained by photolithography, and the driving electronic is a multi-channel low power consumption voltage supply developed inhouse. Finally, the shape detection and the consequent voltage signal to be provided to the piezoelectric array are determined in X-rays, in intra-focal setup at the XACT facility at INAF/OAPA. In this work, we describe the manufacturing steps to obtain a first active mirror prototype and the very first test performed in X-rays.

The Astrophysical r-Process 50 Years after B{sup 2}FH

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kratz, K.-L.; Pfeiffer, B.; Farouqi, K.

Since the historical papers by Burbidge et al. and Cameron 50 years ago, it is generally accepted that half of the chemical elements above Fe are formed in explosive stellar scenarios by a rapid neutron-capture process (the classical ''r-process''). Already from their essential ideas, it became clear that a correct modelling of this nucleosynthesis process requires both, the knowledge of various nuclear properties very far from stability and a detailed description of the astrophysical environments. However, it took about three decades, until in 1986 the first experimental nuclear-physics data on the neutron-magic r-isotopes {sup 80}Zn and {sup 130}Cd could bemore » obtained, which act as key ''waiting points'' in the respective A{approx_equal}80 and 130 peaks of the Solar-System (SS) r-abundances (N{sub r,{center_dot}}). Since then, using steadily improved nuclear data, we have optimized our r-process calculations to reproduce the present observables of the isotopic N{sub r,{center_dot}} ''residuals'', as well as the more recent elemental abundances in ultra-metal-poor, r-process-enriched halo stars. Concerning the latter observations, we support the basic idea about two different types of r-processes. Based on our many years' experience with the site-independent ''waiting-point approach'', we recently have extended our studies to fully dynamical network calculations for the most likely astrophysical r-process scenario, i.e. the high-entropy wind (HEW) of core-collapse type II supernovae (SN II). Again, an excellent reproduction of all observables for the ''main'' r-process has been achieved. However, a major difference is the nucleosynthesis origin of the lighter heavy elements in the 29{<=}Z{<=}45 mass region. Here, the HEW model predicts-instead of a ''weak'' neutron-capture r-process component-a primary rapid charged-particle process. This may explain the recent observations of a non-correlation of these elements with the heavier ''main'' r-process elements.« less

Meeting Community Health Worker Needs for Maternal Health Care Service Delivery Using Appropriate Mobile Technologies in Ethiopia

PubMed Central

Little, Alex; Medhanyie, Araya; Yebyo, Henock; Spigt, Mark; Dinant, Geert-Jan; Blanco, Roman

2013-01-01

Background Mobile health applications are complex interventions that essentially require changes to the behavior of health care professionals who will use them and changes to systems or processes in delivery of care. Our aim has been to meet the technical needs of Health Extension Workers (HEWs) and midwives for maternal health using appropriate mobile technologies tools. Methods We have developed and evaluated a set of appropriate smartphone health applications using open source components, including a local language adapted data collection tool, health worker and manager user-friendly dashboard analytics and maternal-newborn protocols. This is an eighteen month follow-up of an ongoing observational research study in the northern of Ethiopia involving two districts, twenty HEWs, and twelve midwives. Results Most health workers rapidly learned how to use and became comfortable with the touch screen devices so only limited technical support was needed. Unrestricted use of smartphones generated a strong sense of ownership and empowerment among the health workers. Ownership of the phones was a strong motivator for the health workers, who recognised the value and usefulness of the devices, so took care to look after them. A low level of smartphones breakage (8.3%,3 from 36) and loss (2.7%) were reported. Each health worker made an average of 160 mins of voice calls and downloaded 27Mb of data per month, however, we found very low usage of short message service (less than 3 per month). Conclusions Although it is too early to show a direct link between mobile technologies and health outcomes, mobile technologies allow health managers to more quickly and reliably have access to data which can help identify where there issues in the service delivery. Achieving a strong sense of ownership and empowerment among health workers is a prerequisite for a successful introduction of any mobile health program. PMID:24204872

Flood and landslide warning based on rainfall thresholds and soil moisture indexes: the HEWS (Hydrohazards Early Warning System) for Sicily

NASA Astrophysics Data System (ADS)

Brigandì, Giuseppina; Tito Aronica, Giuseppe; Bonaccorso, Brunella; Gueli, Roberto; Basile, Giuseppe

2017-09-01

The main focus of the paper is to present a flood and landslide early warning system, named HEWS (Hydrohazards Early Warning System), specifically developed for the Civil Protection Department of Sicily, based on the combined use of rainfall thresholds, soil moisture modelling and quantitative precipitation forecast (QPF). The warning system is referred to 9 different Alert Zones in which Sicily has been divided into and based on a threshold system of three different increasing critical levels: ordinary, moderate and high. In this system, for early flood warning, a Soil Moisture Accounting (SMA) model provides daily soil moisture conditions, which allow to select a specific set of three rainfall thresholds, one for each critical level considered, to be used for issue the alert bulletin. Wetness indexes, representative of the soil moisture conditions of a catchment, are calculated using a simple, spatially-lumped rainfall-streamflow model, based on the SCS-CN method, and on the unit hydrograph approach, that require daily observed and/or predicted rainfall, and temperature data as input. For the calibration of this model daily continuous time series of rainfall, streamflow and air temperature data are used. An event based lumped rainfall-runoff model has been, instead, used for the derivation of the rainfall thresholds for each catchment in Sicily characterised by an area larger than 50 km2. In particular, a Kinematic Instantaneous Unit Hydrograph based lumped rainfall-runoff model with the SCS-CN routine for net rainfall was developed for this purpose. For rainfall-induced shallow landslide warning, empirical rainfall thresholds provided by Gariano et al. (2015) have been included in the system. They were derived on an empirical basis starting from a catalogue of 265 shallow landslides in Sicily in the period 2002-2012. Finally, Delft-FEWS operational forecasting platform has been applied to link input data, SMA model and rainfall threshold models to produce warning on a daily basis for the entire region.

Beyond the biomedical: community resources for mental health care in rural Ethiopia.

PubMed

Selamu, Medhin; Asher, Laura; Hanlon, Charlotte; Medhin, Girmay; Hailemariam, Maji; Patel, Vikram; Thornicroft, Graham; Fekadu, Abebaw

2015-01-01

The focus of discussion in addressing the treatment gap is often on biomedical services. However, community resources can benefit health service scale-up in resource-constrained settings. These assets can be captured systematically through resource mapping, a method used in social action research. Resource mapping can be informative in developing complex mental health interventions, particularly in settings with limited formal mental health resources. We employed resource mapping within the Programme for Improving Mental Health Care (PRIME), to systematically gather information on community assets that can support integration of mental healthcare into primary care in rural Ethiopia. A semi-structured instrument was administered to key informants. Community resources were identified for all 58 sub-districts of the study district. The potential utility of these resources for the provision of mental healthcare in the district was considered. The district is rich in community resources: There are over 150 traditional healers, 164 churches and mosques, and 401 religious groups. There were on average 5 eddir groups (traditional funeral associations) per sub-district. Social associations and 51 micro-finance institutions were also identified. On average, two traditional bars were found in each sub-district. The eight health centres and 58 satellite clinics staffed by Health Extension Workers (HEWs) represented all the biomedical health services in the district. In addition the Health Development Army (HDA) are community volunteers who support health promotion and prevention activities. The plan for mental healthcare integration in this district was informed by the resource mapping. Community and religious leaders, HEWs, and HDA may have roles in awareness-raising, detection and referral of people with mental illness, improving access to medical care, supporting treatment adherence, and protecting human rights. The diversity of community structures will be used to support rehabilitation and social reintegration. Alcohol use was identified as a target disorder for community-level intervention.

Beyond the Biomedical: Community Resources for Mental Health Care in Rural Ethiopia

PubMed Central

Selamu, Medhin; Asher, Laura; Hanlon, Charlotte; Medhin, Girmay; Hailemariam, Maji; Patel, Vikram; Thornicroft, Graham; Fekadu, Abebaw

2015-01-01

Background The focus of discussion in addressing the treatment gap is often on biomedical services. However, community resources can benefit health service scale-up in resource-constrained settings. These assets can be captured systematically through resource mapping, a method used in social action research. Resource mapping can be informative in developing complex mental health interventions, particularly in settings with limited formal mental health resources. Method We employed resource mapping within the Programme for Improving Mental Health Care (PRIME), to systematically gather information on community assets that can support integration of mental healthcare into primary care in rural Ethiopia. A semi-structured instrument was administered to key informants. Community resources were identified for all 58 sub-districts of the study district. The potential utility of these resources for the provision of mental healthcare in the district was considered. Results The district is rich in community resources: There are over 150 traditional healers, 164 churches and mosques, and 401 religious groups. There were on average 5 eddir groups (traditional funeral associations) per sub-district. Social associations and 51 micro-finance institutions were also identified. On average, two traditional bars were found in each sub-district. The eight health centres and 58 satellite clinics staffed by Health Extension Workers (HEWs) represented all the biomedical health services in the district. In addition the Health Development Army (HDA) are community volunteers who support health promotion and prevention activities. Discussion The plan for mental healthcare integration in this district was informed by the resource mapping. Community and religious leaders, HEWs, and HDA may have roles in awareness-raising, detection and referral of people with mental illness, improving access to medical care, supporting treatment adherence, and protecting human rights. The diversity of community structures will be used to support rehabilitation and social reintegration. Alcohol use was identified as a target disorder for community-level intervention. PMID:25962075

Direct hot slumping and accurate integration process to manufacture prototypal x-ray optical units made of glass

NASA Astrophysics Data System (ADS)

Civitani, M.; Ghigo, M.; Basso, S.; Proserpio, L.; Spiga, D.; Salmaso, B.; Pareschi, G.; Tagliaferri, G.; Burwitz, V.; Hartner, G.; Menz, B.; Bavdaz, M.; Wille, E.

2013-09-01

X-ray telescopes with very large collecting area, like the proposed International X-ray Observatory (IXO, with around 3 m2 at 1 keV), need to be composed of a large number high quality mirror segments, aiming at achieving an angular resolution better than 5 arcsec HEW (Half-Energy-Width). A possible technology to manufacture the modular elements that will compose the entire optical module, named X-ray Optical Units (XOUs), consists of stacking in Wolter-I configuration several layers of thin foils of borosilicate glass, previously formed by hot slumping. The XOUs are subsequently assembled to form complete multi-shell optics with Wolter-I geometry. The achievable global angular resolution of the optic relies on the required surface shape accuracy of slumped foils, on the smoothness of the mirror surfaces and on the correct integration and co-alignment of the mirror segments. The Brera Astronomical Observatory (INAF-OAB) is leading a study, supported by ESA, concerning the implementation of the IXO telescopes based on thin slumped glass foils. In addition to the opto-mechanical design, the study foresees the development of a direct hot slumping thin glass foils production technology. Moreover, an innovative assembly concept making use of Wolter-I counter-form moulds and glass reinforcing ribs is under development. The ribs connect pairs of consecutive foils in an XOU stack, playing a structural and a functional role. In fact, as the ribs constrain the foil profile to the correct shape during the bonding, they damp the low-frequency profile errors still present on the foil after slumping. A dedicated semirobotic Integration MAchine (IMA) has been realized to this scope and used to build a few integrated prototypes made of several layers of slumped plates. In this paper we provide an overview of the project, we report the results achieved so far, including full illumination intra-focus X-ray tests of the last integrated prototype that are compliant with a HEW of around 17''.

Diurnal, seasonal and inter-annual variations in the Schumann resonance parameters

NASA Astrophysics Data System (ADS)

Price, Colin; Melnikov, Alexander

2004-09-01

The Schumann resonances (SR) represent an electromagnetic phenomenon in the Earth's atmosphere related to global lightning activity. The spectral characteristics of the SR modes are defined by their resonant mode amplitude, center frequency and half-width (Q-factor). Long-term (4 years) diurnal and seasonal variations of these parameters are presented based on measurements at a field site in the Negev desert, Israel. Variations of the different modes (8, 14 and 20Hz) and the different electromagnetic components (Hns, Hew and Ez) are presented. The power variations of the various modes and components show three dominant maxima in the diurnal cycle related to lightning activity in south-east Asia (0800UT), Africa (1400UT) and South America (2000UT). The largest global lightning activity occurs during the northern hemisphere summer (JJA) with the southern hemisphere summer (DJF) having the least lightning around the globe. The frequency and half-width (Q-factor) variations of the different modes and SR components are fairly complicated in structure, and will need additional theoretical work to explain their variations. However, the frequency variations are in excellent agreement with previous studies, implying that the frequency variations are robust features of the SR. The inter-annual variability of global lightning activity is shown to vary differently for each of the three major source regions of global lightning.

Analysis of Variations in Hospital Use by Medicare Patients in Psro Areas, 1974-1977

PubMed Central

Deacon, Ronald; Lubitz, James; Gornick, Marian; Newton, Marilyn

1979-01-01

A study of the use of short-stay hospitals in PSRO areas by Medicare enrollees aged 65 and over for the period 1974 through 1977 revealed that discharge rates increased, average length of stay (ALOS) decreased, and days-of-care rates remained relatively constant in nearly all of the PSRO areas. The data show large variations in hospital use in PSRO areas within States and HEW regions, and suggest that factors within the area are critical determinants of hospital utilization. This study presents important implications for PSRO program policy for it suggests that factors other than physician and hospital behavior should also be considered when setting objectives for reducing misutilization and improving the quality of health care. PMID:10309054

Remote-area health care delivery through space technology - STARPAHC

NASA Technical Reports Server (NTRS)

Belasco, N.; Johnston, R. S.; Stonesifer, J. C.; Pool, S. L.

1977-01-01

A joint NASA/HEW project called Space Technology Applied to Rural Papage Advanced Health Care (STARPAHC) has been developed to deliver quality health care to inhabitants of remote geographical areas. The system consists of a hospital-based support control center, a fixed clinic, a mobile clinic, and a referral center with access to specialists via television links to the control center. A strategically located relay station routes television, voice, and data transmissions between system elements. A model system has been installed on the Papage Indian Reservation in Arizona, and is undergoing a 2-year evaluation. The system has been shown to be both effective and cost-efficient, and applications of the concept are planned for future manned spacecraft flights.

STS-61A earth observations

NASA Image and Video Library

1985-10-31

61A-51-045 (31 Oct 1985) --- San Francisco Bay and the San Andreas fault line stand out in this 70mm frame exposed from the Earth-orbiting Space Shuttle Challenger on October 31, 1985. The California coastline extends from Tomales Bay on the north almost to Santa Cruz (just out of frame) on the south. Parts of the Sacramento and San Joaquin valleys are seen along the frame's right edge. Some of the bay's salt evaporators are recognizable by their unique hews, near Fremont and near Vallejo. Center point coordinates are located at 37.5 degrees north latitude and 122.5 degrees west longitude. The Challenger was 180 nautical miles directly above a point centered at 38.8 degrees north latitude and 126.5 degrees west longitude.

Influence of Dense Inert Additives (W and Pb) on Detonation Conditions and Regime of Condensed Explosives

NASA Astrophysics Data System (ADS)

Imkhovik, Nikolay A.

2010-10-01

Results of experimental and theoretical studies of the unusual detonation properties of mixtures of high explosives (HEs) with high-density inert additives W and Pb were analyzed and systematized. Typical examples of the nonideal detonation of composite explosives for which the measured detonation pressure is substantially lower and the detonation velocity is higher than the values calculated within the framework of the hydrodynamic model, with the specific heat ratio for the detonation products of ∼6-8, are presented. Mechanisms of formation of anomalous pressure and mass velocity profiles, which explain the correlation between the Chapman-Jouguet pressure for HE-W and HE-Pb mixtures, the velocity of the free surface of duralumin target, and the depth of the dent imprinted in steel witness plates, are described.

Health workers' perceptions of facilitators of and barriers to institutional delivery in Tigray, Northern Ethiopia.

PubMed

Gebrehiwot, Tesfay; San Sebastian, Miguel; Edin, Kerstin; Goicolea, Isabel

2014-04-10

Evidence shows that the three delays, delay in 1) deciding to seek medical care, 2) reaching health facilities and 3) receiving adequate obstetric care, are still contributing to maternal deaths in low-income countries. Ethiopia is a major contributor to the worldwide death toll of mothers with a maternal mortality ratio of 676 per 100,000 live births. The Ethiopian Ministry of Health launched a community-based health-care system in 2003, the Health Extension Programme (HEP), to tackle maternal mortality. Despite strong efforts, universal access to services remains limited, particularly skilled delivery attendance. With the help of 'the three delays' framework, this study explores health-service providers' perceptions of facilitators and barriers to the utilization of institutional delivery in Tigray, a northern region of Ethiopia. Twelve in-depth interviews were carried out with eight health extension workers (HEWs) and four midwives. Each interview lasted between 90 and 120 minutes. Data were analysed through a thematic analysis approach. Three themes emerged from the analysis: the struggle between tradition and newly acquired knowledge, community willingness to deal with geographical barriers, and striving to do a good job with insufficient resources. These themes represent the three steps in the path towards receiving adequate institutional delivery care at a health facility. Of the themes, 'increased community awareness', 'organization of the community' and 'hospital with specialized staff' were recognized as facilitators. On the other hand, 'delivery as a natural event', 'cultural tradition and rituals', 'inaccessible transport', 'unmet community expectation' and 'shortage of skilled human resources' were represented as barriers to institutional delivery. The participants in this study gave emphasis to the major barriers to institutional delivery that are closely connected with the three delays model. Despite the initiatives being implemented by the Tigray Regional Health Bureau, much is still needed to enhance the humanization approach of delivery care on a broader level of the region. A quick solution is needed to address the major issue of lack of transport accessibility. The poor capacity of the HEWs to provide delivery services, calls for reconsidering staffing patterns of remote health posts and readdressing the issue of downgraded health facilities would address unmet community needs.

Muscle free amino acid profiles are related to differences in skeletal muscle growth between single and twin ovine fetuses near term.

PubMed

Sales, Francisco; Pacheco, David; Blair, Hugh; Kenyon, Paul; McCoard, Sue

2013-01-01

Twin sheep fetuses have reduced skeletal muscle weight near birth relative to singles as a result of restricted muscle hypertrophy. Intracellular free amino acids (FAA) are reported to regulate metabolic pathways which control muscle protein accretion, whereby reduced intracellular content of specific FAA may reduce their activation and therefore, muscle hypertrophy. The aim of this study was to determine whether differences in muscle weight between singleton and twin fetuses, under different maternal conditions is associated with reduced concentration of specific FAA. The FAA content in the semitendinosus muscle (ST) in singleton and twin fetuses (rank) at 140 days of gestation from heavy (H) or light (L) ewes fed ad libitum (A) or maintenance (M) level of nutrition was measured. Muscle weight was reduced in twin fetuses compared to singletons in all groups. Reduced concentrations of leucine, threonine and valine, but higher concentrations of methionine, ornithine, lysine and serine were found in twin fetuses compared to singletons. Maternal size and nutrition interaction with rank resulted in reduced glutamine in twins from HM-ewes (H-ewes under M nutrition) compared to their singleton counterparts. Maternal weight interaction with pregnancy rank reduced the concentration of arginine in twins, with a larger effect on H-ewes compared with L-ewes. Maternal size interaction with pregnancy rank resulted in twins from M-ewes to have lower alanine, while twins from A-ewes had lower aspartic acid concentration compared to singletons. The ST muscle weight was positively correlated only with arginine concentration after taking into account rank, size and nutrition. The present results indicate that reduced concentrations of specific intracellular FAA, such as arginine, leucine, valine, glutamine, which are known to play a role in muscle growth, could be acting as limiting factors for muscle hypertrophy in twin fetuses during late gestation. Ewe size and nutrition can influence the concentration of specific FAA in muscle and should be considered in any intervention plan to improve twin fetal muscle growth.

Thinking Clearly About Schizotypy: Hewing to the Schizophrenia Liability Core, Considering Interesting Tangents, and Avoiding Conceptual Quicksand

PubMed Central

Lenzenweger, Mark F.

2015-01-01

The concept of schizotypy represents a rich and complex psychopathology construct. Furthermore, the construct implies a theoretical model that has considerable utility as an organizing framework for the study of schizophrenia, schizophrenia-related psychopathology (eg, delusional disorder, psychosis-NOS (not otherwise specified), schizotypal, and paranoid personality disorder), and putative schizophrenia endophenotypes as suggested by Rado, Meehl, Gottesman, Lenzenweger, and others. The understanding (and misunderstanding) of the schizophrenia-related schizotypy model, particularly as regards clinical illness, as well as an alternative approach to the construct require vigilance in order to ensure the methodological approach continues to yield the fruit that it can in illuminating the pathogenesis of schizophrenia-related psychopathology. The articles in the Special Section in this issue of Schizophrenia Bulletin highlight methodological and theoretical issues that should be examined carefully. PMID:25810061

Health education telecommunications experiment

NASA Technical Reports Server (NTRS)

Whalen, A. A.

1975-01-01

The Health/Education Telecommunications Experiment (HET) was conducted jointly by NASA and HEW on NASA's ATS-6 communications satellite. This experiment actually consisted of six experiments testing health and education applications of a communication spacecraft producing a broadcast of color television directly from space to over 120 low-cost receivers located in remote rural areas throughout the U.S. (including Alaska). The experiments were conducted over the period from 2 July 1974 to 20 May 1975 and operated on an almost daily basis. The overall telecommunications system to support these experiments consisted of many elements: The ATS-6 spacecraft; five different types of earth stations consisting of 120 video receive terminals, 51 telephony tranceivers and eight video originating terminals of three different types. Actual performance of the equipment as measured in the field was shown to equal or exceed predicted values.

13 CFR 305.4 - Projects for design and engineering work.

Code of Federal Regulations, 2014 CFR

2014-01-01

... engineering work. 305.4 Section 305.4 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION... and engineering work. In the case of Public Works Investment Assistance awarded solely for design and engineering work, the following additional application requirements and terms shall apply: (a) EDA may...

13 CFR 305.4 - Projects for design and engineering work.

Code of Federal Regulations, 2013 CFR

2013-01-01

... engineering work. 305.4 Section 305.4 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION... and engineering work. In the case of Public Works Investment Assistance awarded solely for design and engineering work, the following additional application requirements and terms shall apply: (a) EDA may...

13 CFR 305.4 - Projects for design and engineering work.

Code of Federal Regulations, 2010 CFR

2010-01-01

... engineering work. 305.4 Section 305.4 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION... and engineering work. In the case of Public Works Investment Assistance awarded solely for design and engineering work, the following additional application requirements and terms shall apply: (a) EDA may...

13 CFR 305.4 - Projects for design and engineering work.

Code of Federal Regulations, 2012 CFR

2012-01-01

... engineering work. 305.4 Section 305.4 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION... and engineering work. In the case of Public Works Investment Assistance awarded solely for design and engineering work, the following additional application requirements and terms shall apply: (a) EDA may...

13 CFR 305.4 - Projects for design and engineering work.

Code of Federal Regulations, 2011 CFR

2011-01-01

... engineering work. 305.4 Section 305.4 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION... and engineering work. In the case of Public Works Investment Assistance awarded solely for design and engineering work, the following additional application requirements and terms shall apply: (a) EDA may...

48 CFR 436.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2012 CFR

2012-10-01

... for architect-engineer work. 436.605 Section 436.605 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Service 436.605 Government cost estimate for architect-engineer work. The contracting...

48 CFR 436.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2013 CFR

2013-10-01

... for architect-engineer work. 436.605 Section 436.605 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Service 436.605 Government cost estimate for architect-engineer work. The contracting...

48 CFR 36.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2012 CFR

2012-10-01

... for architect-engineer work. 36.605 Section 36.605 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 36.605 Government cost estimate for architect-engineer work. (a) An independent...

48 CFR 1336.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2011 CFR

2011-10-01

... for architect-engineer work. 1336.605 Section 1336.605 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 1336.605 Government cost estimate for architect-engineer work. After award, the...

48 CFR 1336.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2012 CFR

2012-10-01

... for architect-engineer work. 1336.605 Section 1336.605 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 1336.605 Government cost estimate for architect-engineer work. After award, the...

48 CFR 1336.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2013 CFR

2013-10-01

... for architect-engineer work. 1336.605 Section 1336.605 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 1336.605 Government cost estimate for architect-engineer work. After award, the...

48 CFR 36.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2014 CFR

2014-10-01

... for architect-engineer work. 36.605 Section 36.605 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 36.605 Government cost estimate for architect-engineer work. (a) An independent...

48 CFR 36.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2010 CFR

2010-10-01

... for architect-engineer work. 36.605 Section 36.605 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 36.605 Government cost estimate for architect-engineer work. (a) An independent...

48 CFR 436.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2011 CFR

2011-10-01

... for architect-engineer work. 436.605 Section 436.605 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Service 436.605 Government cost estimate for architect-engineer work. The contracting...

48 CFR 436.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2010 CFR

2010-10-01

... for architect-engineer work. 436.605 Section 436.605 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Service 436.605 Government cost estimate for architect-engineer work. The contracting...

48 CFR 1336.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2010 CFR

2010-10-01

... for architect-engineer work. 1336.605 Section 1336.605 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 1336.605 Government cost estimate for architect-engineer work. After award, the...

48 CFR 36.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2013 CFR

2013-10-01

... for architect-engineer work. 36.605 Section 36.605 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 36.605 Government cost estimate for architect-engineer work. (a) An independent...

48 CFR 436.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2014 CFR

2014-10-01

... for architect-engineer work. 436.605 Section 436.605 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Service 436.605 Government cost estimate for architect-engineer work. The contracting...

48 CFR 36.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2011 CFR

2011-10-01

... for architect-engineer work. 36.605 Section 36.605 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 36.605 Government cost estimate for architect-engineer work. (a) An independent...

48 CFR 1336.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2014 CFR

2014-10-01

... for architect-engineer work. 1336.605 Section 1336.605 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 1336.605 Government cost estimate for architect-engineer work. After award, the...

48 CFR 736.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2013 CFR

2013-10-01

... for architect-engineer work. 736.605 Section 736.605 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 736.605 Government cost estimate for architect-engineer work. See 736.602-3(c)(5). ...

48 CFR 736.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2010 CFR

2010-10-01

... for architect-engineer work. 736.605 Section 736.605 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 736.605 Government cost estimate for architect-engineer work. See 736.602-3(c)(5). ...

48 CFR 736.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2014 CFR

2014-10-01

... for architect-engineer work. 736.605 Section 736.605 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 736.605 Government cost estimate for architect-engineer work. See 736.602-3(c)(5). ...

48 CFR 736.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2012 CFR

2012-10-01

... for architect-engineer work. 736.605 Section 736.605 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 736.605 Government cost estimate for architect-engineer work. See 736.602-3(c)(5). ...

48 CFR 736.605 - Government cost estimate for architect-engineer work.

Code of Federal Regulations, 2011 CFR

2011-10-01

... for architect-engineer work. 736.605 Section 736.605 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL DEVELOPMENT SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 736.605 Government cost estimate for architect-engineer work. See 736.602-3(c)(5). ...

Effect of food additives on egg yolk gelation induced by freezing.

PubMed

Primacella, Monica; Fei, Tao; Acevedo, Nuria; Wang, Tong

2018-10-15

This study demonstrates technological advances in preventing yolk gelation during freezing and thawing. Gelation negatively affects yolk functionality in food formulation. Preventing gelation using 10% salt or sugar limits the application of the yolk. Novel food additives were tested to prevent gelation induced by freezing. Significant reduction (p < 0.05) in gel hardness of frozen-thawed yolk (45 h freezing at -20 °C) indicates that hydrolyzed carboxymethyl cellulose (HCMC), proline, and hydrolyzed egg white and yolk (HEW and HEY) are effective gelation inhibitors. The mechanisms in which these additives prevented gelation were further studied through measuring the changes in the amount of freezable water, lipoprotein particle size, and protein surface hydrophobicity. Overall, this study provides several alternatives of gelation inhibitor that have great potentials in replacing the use of salt or sugar in commercial operation of freezing egg yolk for shelf-life extension. Copyright © 2018 Elsevier Ltd. All rights reserved.

Structural design of Stirling engine with free pistons

NASA Astrophysics Data System (ADS)

Matusov, Jozef; Gavlas, Stanislav; Malcho, Milan

2014-08-01

Stirling engine is a device that converts thermal energy to mechanical work, which is mostly used to drive a generator of electricity. Advantage of Stirling engine is that it works with closed-cycle, where working medium is regularly cooled and heated, which acts on the working piston. This engine can be made in three modifications - alpha, beta, gamma. This paper discusses the design of the gamma Stirling engine with free pistons.

Stirling cycle engine and refrigeration systems

NASA Technical Reports Server (NTRS)

Higa, W. H. (Inventor)

1976-01-01

A Stirling cycle heat engine is disclosed in which displacer motion is controlled as a function of the working fluid pressure P sub 1 and a substantially constant pressure P sub 0. The heat engine includes an auxiliary chamber at the constant pressure P sub 0. An end surface of a displacer piston is disposed in the auxiliary chamber. During the compression portion of the engine cycle when P sub 1 rises above P sub 0 the displacer forces the working fluid to pass from the cold chamber to the hot chamber of the engine. During the expansion portion of the engine cycle the heated working fluid in the hot chamber does work by pushing down on the engine's drive piston. As the working fluid pressure P sub 1 drops below P sub 0 the displacer forces most of the working fluid in the hot chamber to pass through the regenerator to the cold chamber. The engine is easily combinable with a refrigeration section to provide a refrigeration system in which the engine's single drive piston serves both the engine and the refrigeration section.

How engineers perceive the importance of ethics in Finland

NASA Astrophysics Data System (ADS)

Taajamaa, Ville; Majanoja, Anne-Maarit; Bairaktarova, Diana; Airola, Antti; Pahikkala, Tapio; Sutinen, Erkki

2018-01-01

Success in complex and holistic engineering practices requires more than problem-solving abilities and technical competencies. Engineering education must offer proficient technical competences and also train engineers to think and act ethically. A technical 'engineering-like' focus and demand have made educators and students overlook the importance of ethical awareness and transversal competences. Using two Finnish surveys, conducted in 2014 and 2016, we examine how engineers perceive working life needs regarding ethics. The data consider different age groups. We research whether an engineer's age affects their perception of the importance of ethics in their work and if there are differences between young experts and young managers in their use of ethics within work. The results indicate that practising engineers do not consider ethical issues important in their work. This especially applies to younger engineers; the older an engineer, the more important they consider ethics. No statistically significant difference was found between young engineering experts and managers.

Skilled delivery service utilization and its association with the establishment of Women's Health Development Army in Yeky district, South West Ethiopia: a multilevel analysis.

PubMed

Negero, Melese Girmaye; Mitike, Yifru Berhan; Worku, Abebaw Gebeyehu; Abota, Tafesse Lamaro

2018-01-30

Because of the unacceptably high maternal and perinatal morbidity and mortality, the government of Ethiopia has established health extension program with a community-based network involving health extension workers (HEWs) and a community level women organization which is known as "Women's Health Development Army" (WHDA). Currently, the HEWs and WHDA network is the approach preferred by the government to register pregnant women and encourage them to link in the healthcare system. However, its association with skilled delivery service utilization is not well known. A community-based cross-sectional study was conducted from January to February 2015. Within 380 clusters of WHDA, a total of 748 reproductive-age women who gave birth in 1 year preceding the study, were included using multistage sampling technique. The data were entered into EPI info version 7 statistical software and exported to STATA version 11 for analysis. Multilevel analysis technique was applied to check for an association of selected variables with a utilization of skilled delivery service. About 45% of women have received skilled delivery care. A significant heterogeneity was observed between "Women's Health Development Teams (clusters)" for skilled delivery care service utilization which explains about 62% of the total variation. Individual-level predictors including urban residence [AOR (95% CI) 35.10 (4.62, 266.52)], previous exposure of complications [AOR (95% CI) 3.81 (1.60, 9.08)], at least four ANC visits [AOR (95% CI) 7.44 (1.48, 37.42)] and preference of skilled personnel [AOR (95% CI) 8.11 (2.61, 25.15)] were significantly associated with skilled delivery service use. Among cluster level variables, the distance of clusters within 2 km radius from the nearest health facility was significantly associated [AOR (95% CI) 6.03 (1.92, 18.93)] with skilled delivery service utilization. In this study, significant variation among clusters of WHDA was observed. Both individual and cluster level variables were identified to predict skilled delivery service utilization. Encouraging women to have frequent ANC visits (- 4 and above), enhancing awareness creation towards the delivery care attendance, constructing more health facilities and roads in hard to reach areas and establishing telemedicine services are recommended.

Two-tank working gas storage system for heat engine

DOEpatents

Hindes, Clyde J.

1987-01-01

A two-tank working gas supply and pump-down system is coupled to a hot gas engine, such as a Stirling engine. The system has a power control valve for admitting the working gas to the engine when increased power is needed, and for releasing the working gas from the engine when engine power is to be decreased. A compressor pumps the working gas that is released from the engine. Two storage vessels or tanks are provided, one for storing the working gas at a modest pressure (i.e., half maximum pressure), and another for storing the working gas at a higher pressure (i.e., about full engine pressure). Solenoid valves are associated with the gas line to each of the storage vessels, and are selectively actuated to couple the vessels one at a time to the compressor during pumpdown to fill the high-pressure vessel with working gas at high pressure and then to fill the low-pressure vessel with the gas at low pressure. When more power is needed, the solenoid valves first supply the low-pressure gas from the low-pressure vessel to the engine and then supply the high-pressure gas from the high-pressure vessel. The solenoid valves each act as a check-valve when unactuated, and as an open valve when actuated.

On-Board Hydrogen Gas Production System For Stirling Engines

DOEpatents

Johansson, Lennart N.

2004-06-29

A hydrogen production system for use in connection with Stirling engines. The production system generates hydrogen working gas and periodically supplies it to the Stirling engine as its working fluid in instances where loss of such working fluid occurs through usage through operation of the associated Stirling engine. The hydrogen gas may be generated by various techniques including electrolysis and stored by various means including the use of a metal hydride absorbing material. By controlling the temperature of the absorbing material, the stored hydrogen gas may be provided to the Stirling engine as needed. A hydrogen production system for use in connection with Stirling engines. The production system generates hydrogen working gas and periodically supplies it to the Stirling engine as its working fluid in instances where loss of such working fluid occurs through usage through operation of the associated Stirling engine. The hydrogen gas may be generated by various techniques including electrolysis and stored by various means including the use of a metal hydride absorbing material. By controlling the temperature of the absorbing material, the stored hydrogen gas may be provided to the Stirling engine as needed.

Electronic Communication in Engineering Work.

ERIC Educational Resources Information Center

Bishop, Ann P.

1992-01-01

Discusses the role of electronic networks in engineering work; reviews selected literature on engineering work, knowledge, and communication; describes current uses of electronic networks; and presents results from a study of the use of networks by engineers in the aerospace industry, including their perceptions of networks. (67 references) (LRW)

78 FR 15110 - Aviation Rulemaking Advisory Committee; Engine Bird Ingestion Requirements-New Task

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-08

...: During the bird-ingestion rulemaking database (BRDB) working group`s reevaluation of the current engine... engine core ingestion. If the BRDB working group`s reevaluation determines that such requirements are... Task ARAC accepted the task and will establish the Engine Harmonization Working Group (EHWG), under the...

48 CFR 52.236-24 - Work Oversight in Architect-Engineer Contracts.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Architect-Engineer Contracts. 52.236-24 Section 52.236-24 Federal Acquisition Regulations System FEDERAL... Provisions and Clauses 52.236-24 Work Oversight in Architect-Engineer Contracts. As prescribed in 36.609-3, insert the following clause: Work Oversight in Architect-Engineer Contracts (APR 1984) The extent and...

48 CFR 52.236-24 - Work Oversight in Architect-Engineer Contracts.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Architect-Engineer Contracts. 52.236-24 Section 52.236-24 Federal Acquisition Regulations System FEDERAL... Provisions and Clauses 52.236-24 Work Oversight in Architect-Engineer Contracts. As prescribed in 36.609-3, insert the following clause: Work Oversight in Architect-Engineer Contracts (APR 1984) The extent and...

48 CFR 52.236-24 - Work Oversight in Architect-Engineer Contracts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Architect-Engineer Contracts. 52.236-24 Section 52.236-24 Federal Acquisition Regulations System FEDERAL... Provisions and Clauses 52.236-24 Work Oversight in Architect-Engineer Contracts. As prescribed in 36.609-3, insert the following clause: Work Oversight in Architect-Engineer Contracts (APR 1984) The extent and...

48 CFR 52.236-24 - Work Oversight in Architect-Engineer Contracts.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Architect-Engineer Contracts. 52.236-24 Section 52.236-24 Federal Acquisition Regulations System FEDERAL... Provisions and Clauses 52.236-24 Work Oversight in Architect-Engineer Contracts. As prescribed in 36.609-3, insert the following clause: Work Oversight in Architect-Engineer Contracts (APR 1984) The extent and...

48 CFR 52.236-24 - Work Oversight in Architect-Engineer Contracts.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Architect-Engineer Contracts. 52.236-24 Section 52.236-24 Federal Acquisition Regulations System FEDERAL... Provisions and Clauses 52.236-24 Work Oversight in Architect-Engineer Contracts. As prescribed in 36.609-3, insert the following clause: Work Oversight in Architect-Engineer Contracts (APR 1984) The extent and...

Efficiency bounds for nonequilibrium heat engines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mehta, Pankaj; Polkovnikov, Anatoli, E-mail: asp@bu.edu

2013-05-15

We analyze the efficiency of thermal engines (either quantum or classical) working with a single heat reservoir like an atmosphere. The engine first gets an energy intake, which can be done in an arbitrary nonequilibrium way e.g. combustion of fuel. Then the engine performs the work and returns to the initial state. We distinguish two general classes of engines where the working body first equilibrates within itself and then performs the work (ergodic engine) or when it performs the work before equilibrating (non-ergodic engine). We show that in both cases the second law of thermodynamics limits their efficiency. For ergodicmore » engines we find a rigorous upper bound for the efficiency, which is strictly smaller than the equivalent Carnot efficiency. I.e. the Carnot efficiency can be never achieved in single reservoir heat engines. For non-ergodic engines the efficiency can be higher and can exceed the equilibrium Carnot bound. By extending the fundamental thermodynamic relation to nonequilibrium processes, we find a rigorous thermodynamic bound for the efficiency of both ergodic and non-ergodic engines and show that it is given by the relative entropy of the nonequilibrium and initial equilibrium distributions. These results suggest a new general strategy for designing more efficient engines. We illustrate our ideas by using simple examples. -- Highlights: ► Derived efficiency bounds for heat engines working with a single reservoir. ► Analyzed both ergodic and non-ergodic engines. ► Showed that non-ergodic engines can be more efficient. ► Extended fundamental thermodynamic relation to arbitrary nonequilibrium processes.« less

Enhanced and Tunable Optical Quantum Efficiencies from Plasmon Bandwidth Engineering in Bimetallic CoAg Nanoparticles (Open Access Publisher’s Version)

DTIC Science & Technology

2016-08-01

Engineering Engineering -- Faculty Publications and Other Works 8-2016 Enhanced and tunable optical quantum efficiencies from plasmon bandwidth engineering ...this and additional works at: http://trace.tennessee.edu/utk_matepubs Part of the Materials Science and Engineering Commons This Article is brought to...you for free and open access by the Engineering -- Faculty Publications and Other Works at Trace: Tennessee Research and Creative Exchange. It has been

Double-reed exhaust valve engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, Charles L.

An engine based on a reciprocating piston engine that extracts work from pressurized working fluid. The engine includes a double reed outlet valve for controlling the flow of low-pressure working fluid out of the engine. The double reed provides a stronger force resisting closure of the outlet valve than the force tending to open the outlet valve. The double reed valve enables engine operation at relatively higher torque and lower efficiency at low speed, with lower torque, but higher efficiency at high speed.

33 CFR 211.73 - Determination of land available for sale.

Code of Federal Regulations, 2010 CFR

2010-07-01

... ARMY, DEPARTMENT OF DEFENSE REAL ESTATE ACTIVITIES OF THE CORPS OF ENGINEERS IN CONNECTION WITH CIVIL... the Director of Civil Works (Assistant to the Chief of Engineers for Civil Works) is hereby delegated... use. The Chief of Engineers or the Director of Civil Works (Assistant to the Chief of Engineers for...

7 CFR 1717.604 - Long-range engineering plans and construction work plans.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Long-range engineering plans and construction work... AND GUARANTEED ELECTRIC LOANS Operational Controls § 1717.604 Long-range engineering plans and construction work plans. (a) All borrowers are required to maintain up-to-date long-range engineering plans and...

7 CFR 1717.604 - Long-range engineering plans and construction work plans.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 11 2013-01-01 2013-01-01 false Long-range engineering plans and construction work... AND GUARANTEED ELECTRIC LOANS Operational Controls § 1717.604 Long-range engineering plans and construction work plans. (a) All borrowers are required to maintain up-to-date long-range engineering plans and...

7 CFR 1717.604 - Long-range engineering plans and construction work plans.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 11 2014-01-01 2014-01-01 false Long-range engineering plans and construction work... AND GUARANTEED ELECTRIC LOANS Operational Controls § 1717.604 Long-range engineering plans and construction work plans. (a) All borrowers are required to maintain up-to-date long-range engineering plans and...

7 CFR 1717.604 - Long-range engineering plans and construction work plans.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 11 2012-01-01 2012-01-01 false Long-range engineering plans and construction work... AND GUARANTEED ELECTRIC LOANS Operational Controls § 1717.604 Long-range engineering plans and construction work plans. (a) All borrowers are required to maintain up-to-date long-range engineering plans and...

7 CFR 1717.604 - Long-range engineering plans and construction work plans.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 11 2011-01-01 2011-01-01 false Long-range engineering plans and construction work... AND GUARANTEED ELECTRIC LOANS Operational Controls § 1717.604 Long-range engineering plans and construction work plans. (a) All borrowers are required to maintain up-to-date long-range engineering plans and...

Extracting Work from Quantum Measurement in Maxwell's Demon Engines

NASA Astrophysics Data System (ADS)

Elouard, Cyril; Herrera-Martí, David; Huard, Benjamin; Auffèves, Alexia

2017-06-01

The essence of both classical and quantum engines is to extract useful energy (work) from stochastic energy sources, e.g., thermal baths. In Maxwell's demon engines, work extraction is assisted by a feedback control based on measurements performed by a demon, whose memory is erased at some nonzero energy cost. Here we propose a new type of quantum Maxwell's demon engine where work is directly extracted from the measurement channel, such that no heat bath is required. We show that in the Zeno regime of frequent measurements, memory erasure costs eventually vanish. Our findings provide a new paradigm to analyze quantum heat engines and work extraction in the quantum world.

Social Work and Engineering Collaboration: Forging Innovative Global Community Development Education

ERIC Educational Resources Information Center

Gilbert, Dorie J.

2014-01-01

Interdisciplinary programs in schools of social work are growing in scope and number. This article reports on collaboration between a school of social work and a school of engineering, which is forging a new area of interdisciplinary education. The program engages social work students working alongside engineering students in a team approach to…

Women's Reasons for Leaving the Engineering Field.

PubMed

Fouad, Nadya A; Chang, Wen-Hsin; Wan, Min; Singh, Romila

2017-01-01

Among the different Science, Technology, Engineering, and Math fields, engineering continues to have one of the highest rates of attrition (Hewlett et al., 2008). The turnover rate for women engineers from engineering fields is even higher than for men (Frehill, 2010). Despite increased efforts from researchers, there are still large gaps in our understanding of the reasons that women leave engineering. This study aims to address this gap by examining the reasons why women leave engineering. Specifically, we analyze the reasons for departure given by national sample of 1,464 women engineers who left the profession after having worked in the engineering field. We applied a person-environment fit theoretical lens, in particular, the Theory of Work Adjustment (TWA) (Dawis and Lofquist, 1984) to understand and categorize the reasons for leaving the engineering field. According to the TWA, occupations have different "reinforcer patterns," reflected in six occupational values, and a mismatch between the reinforcers provided by the work environment and individuals' needs may trigger departure from the environment. Given the paucity of literature in this area, we posed research questions to explore the reinforcer pattern of values implicated in women's decisions to leave the engineering field. We used qualitative analyses to understand, categorize, and code the 1,863 statements that offered a glimpse into the myriad reasons that women offered in describing their decisions to leave the engineering profession. Our results revealed the top three sets of reasons underlying women's decision to leave the jobs and engineering field were related to: first, poor and/or inequitable compensation, poor working conditions, inflexible and demanding work environment that made work-family balance difficult; second, unmet achievement needs that reflected a dissatisfaction with effective utilization of their math and science skills, and third, unmet needs with regard to lack of recognition at work and adequate opportunities for advancement. Implications of these results for future research as well as the design of effective intervention programs aimed at women engineers' retention and engagement in engineering are discussed.

Teaching Engineering Students Team Work

NASA Technical Reports Server (NTRS)

Levi, Daniel

1998-01-01

The purpose of this manual is to provide professor's in engineering classes which the background necessary to use student team projects effectively. This manual describes some of the characteristics of student teams and how to use them in class. It provides a set of class activities and films which can be used to introduce and support student teams. Finally, a set of teaching modules used in freshmen, sophomore, and senior aeronautical engineering classes are presented. This manual was developed as part of a NASA sponsored project to improve the undergraduate education of aeronautical engineers. The project has helped to purchase a set of team work films which can be checked out from Cal Poly's Learning Resources Center in the Kennedy Library. Research for this project has included literature reviews on team work and cooperative learning; interviews, observations, and surveys of Cal Poly students from Industrial and Manufacturing Engineering, Aeronautical Engineering and Psychology; participation in the Aeronautical Engineering senior design lab; and interviews with engineering faculty. In addition to this faculty manual, there is a student team work manual which has been designed to help engineering students work better in teams.

48 CFR 36.609-3 - Work oversight in architect-engineer contracts.

Code of Federal Regulations, 2012 CFR

2012-10-01

... architect-engineer contracts. 36.609-3 Section 36.609-3 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 36.609-3 Work oversight in architect-engineer contracts. The contracting officer...

48 CFR 36.609-3 - Work oversight in architect-engineer contracts.

Code of Federal Regulations, 2013 CFR

2013-10-01

... architect-engineer contracts. 36.609-3 Section 36.609-3 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 36.609-3 Work oversight in architect-engineer contracts. The contracting officer...

48 CFR 36.609-3 - Work oversight in architect-engineer contracts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... architect-engineer contracts. 36.609-3 Section 36.609-3 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 36.609-3 Work oversight in architect-engineer contracts. The contracting officer...

48 CFR 36.609-3 - Work oversight in architect-engineer contracts.

Code of Federal Regulations, 2014 CFR

2014-10-01

... architect-engineer contracts. 36.609-3 Section 36.609-3 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 36.609-3 Work oversight in architect-engineer contracts. The contracting officer...

48 CFR 36.609-3 - Work oversight in architect-engineer contracts.

Code of Federal Regulations, 2011 CFR

2011-10-01

... architect-engineer contracts. 36.609-3 Section 36.609-3 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 36.609-3 Work oversight in architect-engineer contracts. The contracting officer...

Shape-memory materials as a working substance for martensitic rotary engines

NASA Astrophysics Data System (ADS)

Mandzhavidze, A. G.; Barnov, V. A.; Sobolevskaya, S. V.; Margvelashvili, O. V.

2006-05-01

A martensitic rotary engine has been designed. The physical properties of its working substance are studied, and the power characteristics of the engine are determined. Temperature and stress cycling are shown to adversely affect the properties of the working element (a coil spring made of titanium nickelide) and, thus, to decrease the engine efficiency.

Working conditions in the engine department - A qualitative study among engine room personnel on board Swedish merchant ships.

PubMed

Lundh, Monica; Lützhöft, Margareta; Rydstedt, Leif; Dahlman, Joakim

2011-01-01

The specific problems associated with the work on board within the merchant fleet are well known and have over the years been a topic of discussion. The work conditions in the engine room (ER) are demanding due to, e.g. the thermal climate, noise and awkward working postures. The work in the engine control room (ECR) has over recent years undergone major changes, mainly due to the introduction of computers on board. In order to capture the impact these changes had implied, and also to investigate how the work situation has developed, a total of 20 engine officers and engine ratings were interviewed. The interviews were semi-structured and Grounded Theory was used for the data analysis. The aim of the present study was to describe how the engine crew perceive their work situation and working environment on board. Further, the aim was to identify areas for improvements which the engine crew consider especially important for a safe and effective work environment. The result of the study shows that the design of the ECR and ER is crucial for how different tasks are performed. Design which does not support operational procedures and how tasks are performed risk inducing inappropriate behaviour as the crew members' are compelled to find alternative ways to perform their tasks in order to get the job done. These types of behaviour can induce an increased risk of exposure to hazardous substances and the engine crew members becoming injured. Copyright © 2010 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Generic Engineering Competencies: A Review and Modelling Approach

ERIC Educational Resources Information Center

Male, Sally A.

2010-01-01

This paper puts forward the view that engineering educators have a responsibility to prepare graduates for engineering work and careers. The current literature reveals gaps between the competencies required for engineering work and those developed in engineering education. Generic competencies feature in these competency gaps. Literature suggests…

Detonation Jet Engine. Part 2--Construction Features

ERIC Educational Resources Information Center

Bulat, Pavel V.; Volkov, Konstantin N.

2016-01-01

We present the most relevant works on jet engine design that utilize thermodynamic cycle of detonative combustion. Detonation engines of various concepts, pulse detonation, rotational and engine with stationary detonation wave, are reviewed. Main trends in detonation engine development are discussed. The most important works that carried out…

The Current Status and Factors Associated With Implanon Service Provision by the Health Extension Workers at the Health Post Level, Wolaita Zone, Southern Ethiopia: A Cross-Sectional Study

PubMed Central

Desalegn, Ketsela; Loha, Eskindir; Meskele, Mengistu

2017-01-01

Objective: Family Planning is often taken as one of the “Magic Bullet” interventions owing to its high impact and wide reaching nature in achieving multiple goals. This study aimed to assess the current status and the factors associated with health post level Implanon service provision through trained health extension workers in Wolaita zone, southern Ethiopia. Materials and methods: A cross sectional study was conducted among trained health extension workers in Wolaita zone in February 2013. A simple random sampling technique was used to identify a total of 285 trained HEWs. First bivariate, then multivariate logistic regression model along with 95% confidence interval was used to see the independent effect of factors associated with current Implanon service provision by the health extension workers. Results: Currently, the number of Implaon providing trained health extension workers in Wolaita was 264(45.8%). Distance of health post from district health offices and health center, turnover of trained health extension workers in the health post, interest of trained health extension workers in providing Implanon and their job satisfaction to serve as a health extension workers and availability of service delivery guidelines and teaching aids were associated with the current provision of Implanon by health extension workers. Conclusion: Implanon provision among trained health extension workers was affected by different factors. Hence, improving the working conditions of trained health extension workers, regular and periodic facilitative supervision, availing service delivery guidelines and improvement of health management information system are recommended. PMID:29114263

40 CFR Appendix C-1 to Subpart E... - Required Provisions-Consulting Engineering Agreements

Code of Federal Regulations, 2014 CFR

2014-07-01

... Engineering Agreements C Appendix C-1 to Subpart E of Part 35 Protection of Environment ENVIRONMENTAL... Provisions—Consulting Engineering Agreements 1. General 2. Responsibility of the Engineer 3. Scope of Work 4... drawings, designs, specifications, reports, and incidental engineering work or materials furnished...

40 CFR Appendix C-1 to Subpart E... - Required Provisions-Consulting Engineering Agreements

Code of Federal Regulations, 2013 CFR

2013-07-01

... Engineering Agreements C Appendix C-1 to Subpart E of Part 35 Protection of Environment ENVIRONMENTAL... Provisions—Consulting Engineering Agreements 1. General 2. Responsibility of the Engineer 3. Scope of Work 4... drawings, designs, specifications, reports, and incidental engineering work or materials furnished...

40 CFR Appendix C-1 to Subpart E... - Required Provisions-Consulting Engineering Agreements

Code of Federal Regulations, 2011 CFR

2011-07-01

... Engineering Agreements C Appendix C-1 to Subpart E of Part 35 Protection of Environment ENVIRONMENTAL... Provisions—Consulting Engineering Agreements 1. General 2. Responsibility of the Engineer 3. Scope of Work 4... drawings, designs, specifications, reports, and incidental engineering work or materials furnished...

40 CFR Appendix C-1 to Subpart E... - Required Provisions-Consulting Engineering Agreements

Code of Federal Regulations, 2012 CFR

2012-07-01

... Engineering Agreements C Appendix C-1 to Subpart E of Part 35 Protection of Environment ENVIRONMENTAL... Provisions—Consulting Engineering Agreements 1. General 2. Responsibility of the Engineer 3. Scope of Work 4... drawings, designs, specifications, reports, and incidental engineering work or materials furnished...

48 CFR 936.609-3 - Work oversight in architect-engineer contracts.

Code of Federal Regulations, 2012 CFR

2012-10-01

... architect-engineer contracts. 936.609-3 Section 936.609-3 Federal Acquisition Regulations System DEPARTMENT OF ENERGY SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 936.609-3 Work oversight in architect-engineer contracts. In addition to the clause at 48...

48 CFR 936.609-3 - Work oversight in architect-engineer contracts.

Code of Federal Regulations, 2014 CFR

2014-10-01

... architect-engineer contracts. 936.609-3 Section 936.609-3 Federal Acquisition Regulations System DEPARTMENT OF ENERGY SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 936.609-3 Work oversight in architect-engineer contracts. In addition to the clause at 48...

48 CFR 936.609-3 - Work oversight in architect-engineer contracts.

Code of Federal Regulations, 2013 CFR

2013-10-01

... architect-engineer contracts. 936.609-3 Section 936.609-3 Federal Acquisition Regulations System DEPARTMENT OF ENERGY SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 936.609-3 Work oversight in architect-engineer contracts. In addition to the clause at 48...

48 CFR 936.609-3 - Work oversight in architect-engineer contracts.

Code of Federal Regulations, 2011 CFR

2011-10-01

... architect-engineer contracts. 936.609-3 Section 936.609-3 Federal Acquisition Regulations System DEPARTMENT OF ENERGY SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 936.609-3 Work oversight in architect-engineer contracts. In addition to the clause at 48...

48 CFR 936.609-3 - Work oversight in architect-engineer contracts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... architect-engineer contracts. 936.609-3 Section 936.609-3 Federal Acquisition Regulations System DEPARTMENT OF ENERGY SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 936.609-3 Work oversight in architect-engineer contracts. In addition to the clause at 48...

Performance investigation of bandgap, gate material work function and gate dielectric engineered TFET with device reliability improvement

NASA Astrophysics Data System (ADS)

Raad, Bhagwan Ram; Nigam, Kaushal; Sharma, Dheeraj; Kondekar, P. N.

2016-06-01

This script features a study of bandgap, gate material work function and gate dielectric engineering for enhancement of DC and Analog/RF performance, reduction in the hot carriers effect (HCEs) and drain induced barrier lowering (DIBL) for better device reliability. In this concern, the use of band gap and gate material work function engineering improves the device performance in terms of the ON-state current and suppressed ambipolar behaviour with maintaining the low OFF-state current. With these advantages, the use of gate material work function engineering imposes restriction on the high frequency performance due to increment in the parasitic capacitances and also introduces the hot carrier effects. Hence, the gate dielectric engineering with bandgap and gate material work function engineering are used in this paper to overcome the cons of the gate material work function engineering by obtaining a superior performance in terms of the current driving capability, ambipolar conduction, HCEs, DIBL and high frequency parameters of the device for ultra-low power applications. Finally, the optimization of length for different work function is performed to get the best out of this.

Work extremum principle: structure and function of quantum heat engines.

PubMed

Allahverdyan, Armen E; Johal, Ramandeep S; Mahler, Guenter

2008-04-01

We consider a class of quantum heat engines consisting of two subsystems interacting with a work-source and coupled to two separate baths at different temperatures Th>Tc. The purpose of the engine is to extract work due to the temperature difference. Its dynamics is not restricted to the near equilibrium regime. The engine structure is determined by maximizing the extracted work under various constraints. When this maximization is carried out at finite power, the engine dynamics is described by well-defined temperatures and satisfies the local version of the second law. In addition, its efficiency is bounded from below by the Curzon-Ahlborn value 1-radical Tc/Th and from above by the Carnot value 1-(Tc/Th). The latter is reached-at finite power--for a macroscopic engine, while the former is achieved in the equilibrium limit Th-->Tc . The efficiency that maximizes the power is strictly larger than the Curzon-Ahloborn value. When the work is maximized at a zero power, even a small (few-level) engine extracts work right at the Carnot efficiency.

29 CFR 1910.1017 - Vinyl chloride.

Code of Federal Regulations, 2011 CFR

2011-07-01

... this section by engineering, work practice, and personal protective controls as follows: (1) Feasible engineering and work practice controls shall immediately be used to reduce exposures to at or below the permissible exposure limit. (2) Wherever feasible engineering and work practice controls which can be...

29 CFR 1910.1017 - Vinyl chloride.

Code of Federal Regulations, 2010 CFR

2010-07-01

... this section by engineering, work practice, and personal protective controls as follows: (1) Feasible engineering and work practice controls shall immediately be used to reduce exposures to at or below the permissible exposure limit. (2) Wherever feasible engineering and work practice controls which can be...

Rankine cycle waste heat recovery system

DOEpatents

Ernst, Timothy C.; Nelson, Christopher R.

2015-09-22

A waste heat recovery (WHR) system connects a working fluid to fluid passages formed in an engine block and/or a cylinder head of an internal combustion engine, forming an engine heat exchanger. The fluid passages are formed near high temperature areas of the engine, subjecting the working fluid to sufficient heat energy to vaporize the working fluid while the working fluid advantageously cools the engine block and/or cylinder head, improving fuel efficiency. The location of the engine heat exchanger downstream from an EGR boiler and upstream from an exhaust heat exchanger provides an optimal position of the engine heat exchanger with respect to the thermodynamic cycle of the WHR system, giving priority to cooling of EGR gas. The configuration of valves in the WHR system provides the ability to select a plurality of parallel flow paths for optimal operation.

Making Work: Demonstrating Thermodynamic Concepts with Solar-Powered Wax and Rubber Heat Engines

ERIC Educational Resources Information Center

Appleyard, S. J.

2007-01-01

Construction details are provided for simple heat engines that use candle wax and elastomers as working substances. The engines are constructed using common household materials and can be easily constructed in a school classroom or at home. They work reliably and are useful tools for demonstrating the conversion of heat to mechanical work. They…

An Australian study of possible selves perceived by undergraduate engineering students

NASA Astrophysics Data System (ADS)

Bennett, Dawn; Male, Sally A.

2017-11-01

In this study, we worked with second-year engineering students at an Australian university to examine previously identified threshold concepts within the theoretical framework of Possible Selves. Using workshops as the context for intensive work with students, students were encouraged to consider their future lives and work, including their engineering fears, expectations, and aspirations. The findings revealed many students to have a poor understanding of the realities of engineering work. Moreover, perceived gaps between self-efficacy and the requirements of engineering work appeared to be motivating if students deemed it possible to reduce the gap, but demotivating if they identified a characteristic over which there was perceived to be no control. The study suggests that these engineering students needed more opportunities to explore both the roles of engineers and their own possible selves. Overall, the findings indicate that higher education students may need encouragement and support to explore potential future roles, and they strengthen calls for further research in this area.

Investigation of He-W interactions using DiMES on DIII-D

NASA Astrophysics Data System (ADS)

Doerner, R. P.; Rudakov, D. L.; Chrobak, C. P.; Briesemeister, A. R.; Corr, C.; De Temmerman, G.; Kluth, P.; Lasnier, C. J.; McLean, A. G.; Pace, D. C.; Pitts, R. A.; Schmitz, O.; Thompson, M.; Winters, V.

2016-02-01

Tungsten button samples were exposed to He ELMing H-mode plasma in DIII-D using 2.3 MW of electron cyclotron heating power. Prior to the exposures, the W buttons were exposed to either He, or D, plasma in PISCES-A for 2000 s at surface temperatures of 225-850 °C to create a variety of surfaces (surface blisters, subsurface nano-bubbles, fuzz). Erosion was spectroscopically measured from each DiMES sample, with the exception of the fuzzy W samples which showed almost undetectable WI emission. Post-exposure grazing incidence small angle x-ray scattering surface analysis showed the formation of 1.5 nm diameter He bubbles in the surface of W buttons after only a single DIII-D (3 s, ˜150 ELMs) discharge, similar to the bubble layer resulting from the 2000 s. exposure in PISCES-A. No surface roughening, or damage, was detected on the samples after approximately 600 ELMs with energy density between 0.04-0.1 MJ m-2.

Sir Harold Jeffreys

USGS Publications Warehouse

Spall, H.

1980-01-01

Sir Harold Jeffreys is a world authority in theoretical geophyiscs. hew as born in Northumbria (northeast of England) and educated at Armstrong College (now the University of Newcastle-upon-Tyne) and Cambridge University. He is now a Senior Fellow of St.John's College, Cambridge. He has published over 300 scientific papers and is the author of 7 books, including Theory of Probability and Mathematical Physics (with his wife, Lady Bertha Swirles Jeffreys). Sir Harold has made innumerable theoretical contributions to seismology. Many of these are documented in his book The Earth, which has been published in six editions. His papers have recently been collated by Gordon and Breach (Publishers) into six volumes, Collected Papers on Sir Harold Jeffreys on Geophyiscs and other Sciences. Some idea of the breadth of this research can be seen from the individual volume titles: "Theoretical and Observational Seismology," "Observational Seismology," "Gravity," "Dissipation of Energy and Thermal History," "Astronomy and Geophysics," and "Matematics, Probability and Miscellaneious Other Sciences." 

U. S. ground troops in South Vietnam were in areas sprayed with herbicide orange

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-11-16

Between 1966 and 1969 a large number of U.S. ground troops in Vietnam were in areas sprayed with herbicide orange both during and shortly after spraying. DOD took few precautions to prevent exposure because at that time it did not consider the herbicide to be toxic or dangerous to humans. Marines assigned to units in sprayed areas can be identified, but Army personnel cannot because Army records are incomplete. Troops' actual exposure or the degree of exposure to the herbicide cannot be documented from available records. Also, the long-term efects of exposure remain largely unknown. The Congress should direct DOD,more » VA, HEW, or the Environmental Protection Agency to determine whether a study is needed of the health effects of herbicide orange on ground troops discussed in this report. GAO issued this report at the request of Senator Charles Percy, Ranking Minority Member of the Permanent Subcommittee on Investigations, Senate Committee on Governmental Affairs.« less

29 CFR 1910.1018 - Inorganic arsenic.

Code of Federal Regulations, 2012 CFR

2012-07-01

... possible time but not later than December 31, 1979, engineering and work practice controls to reduce... that such controls are not feasible. (ii) Where engineering and work practice controls are not... program to reduce exposures to or below the permissible exposure limit by means of engineering and work...

40 CFR 1048.405 - How does this program work?

Code of Federal Regulations, 2010 CFR

2010-07-01

... CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES Testing In-use Engines § 1048.405 How does this program work? (a) You must test in-use engines, for exhaust emissions, from the families we select. We may select up to 25 percent of your engine families in any model year—or one engine...

Assessment of a 40-kilowatt stirling engine for underground mining applications

NASA Technical Reports Server (NTRS)

Cairelli, J. E.; Kelm, G. G.; Slaby, J. G.

1982-01-01

An assessment of alternative power souces for underground mining applications was performed. A 40-kW Stirling research engine was tested to evaluate its performance and emission characteristics when operated with helium working gas and diesel fuel. The engine, the test facility, and the test procedures are described. Performance and emission data for the engine operating with helium working gas and diesel fuel are reported and compared with data obtained with hydrogen working gas and unleaded gasoline fuel. Helium diesel test results are compared with the characteristics of current diesel engines and other Stirling engines. External surface temperature data are also presented. Emission and temperature results are compared with the Federal requirements for diesel underground mine engines. The durability potential of Stirling engines is discussed on the basis of the experience gaind during the engine tests.

Verbal-Visual Preferences of Working Engineers

ERIC Educational Resources Information Center

Baukal, Charles E.; Ausburn, Lynna J.

2016-01-01

Many have argued for increased continuing education for working engineers, but relatively little research has been done on how to most effectively teach that group. Many have also recommended using learner characteristics to enhance learning, but relatively little is known about the learner characteristics of working engineers. In the study…

Women’s Reasons for Leaving the Engineering Field

PubMed Central

Fouad, Nadya A.; Chang, Wen-Hsin; Wan, Min; Singh, Romila

2017-01-01

Among the different Science, Technology, Engineering, and Math fields, engineering continues to have one of the highest rates of attrition (Hewlett et al., 2008). The turnover rate for women engineers from engineering fields is even higher than for men (Frehill, 2010). Despite increased efforts from researchers, there are still large gaps in our understanding of the reasons that women leave engineering. This study aims to address this gap by examining the reasons why women leave engineering. Specifically, we analyze the reasons for departure given by national sample of 1,464 women engineers who left the profession after having worked in the engineering field. We applied a person-environment fit theoretical lens, in particular, the Theory of Work Adjustment (TWA) (Dawis and Lofquist, 1984) to understand and categorize the reasons for leaving the engineering field. According to the TWA, occupations have different “reinforcer patterns,” reflected in six occupational values, and a mismatch between the reinforcers provided by the work environment and individuals’ needs may trigger departure from the environment. Given the paucity of literature in this area, we posed research questions to explore the reinforcer pattern of values implicated in women’s decisions to leave the engineering field. We used qualitative analyses to understand, categorize, and code the 1,863 statements that offered a glimpse into the myriad reasons that women offered in describing their decisions to leave the engineering profession. Our results revealed the top three sets of reasons underlying women’s decision to leave the jobs and engineering field were related to: first, poor and/or inequitable compensation, poor working conditions, inflexible and demanding work environment that made work-family balance difficult; second, unmet achievement needs that reflected a dissatisfaction with effective utilization of their math and science skills, and third, unmet needs with regard to lack of recognition at work and adequate opportunities for advancement. Implications of these results for future research as well as the design of effective intervention programs aimed at women engineers’ retention and engagement in engineering are discussed. PMID:28713295

Lossless Brownian Information Engine

NASA Astrophysics Data System (ADS)

Paneru, Govind; Lee, Dong Yun; Tlusty, Tsvi; Pak, Hyuk Kyu

2018-01-01

We report on a lossless information engine that converts nearly all available information from an error-free feedback protocol into mechanical work. Combining high-precision detection at a resolution of 1 nm with ultrafast feedback control, the engine is tuned to extract the maximum work from information on the position of a Brownian particle. We show that the work produced by the engine achieves a bound set by a generalized second law of thermodynamics, demonstrating for the first time the sharpness of this bound. We validate a generalized Jarzynski equality for error-free feedback-controlled information engines.

Lossless Brownian Information Engine.

PubMed

Paneru, Govind; Lee, Dong Yun; Tlusty, Tsvi; Pak, Hyuk Kyu

2018-01-12

We report on a lossless information engine that converts nearly all available information from an error-free feedback protocol into mechanical work. Combining high-precision detection at a resolution of 1 nm with ultrafast feedback control, the engine is tuned to extract the maximum work from information on the position of a Brownian particle. We show that the work produced by the engine achieves a bound set by a generalized second law of thermodynamics, demonstrating for the first time the sharpness of this bound. We validate a generalized Jarzynski equality for error-free feedback-controlled information engines.

Depot Maintenance: Air Force is Assessing Engine Maintenance Options for Work Currently Performed at Kelly Aviation Center

DTIC Science & Technology

2011-02-11

on TF39 engines, which are typically used for C-5 Galaxy aircraft; T56 engines, which are typically used for C-130 aircraft; and fuel accessories on...conducting separate cost-benefit analyses for the TF39 and T56 engine maintenance work. Under Air Force guidance for depot-level source-of-repair selection...Force has not developed specific risk mitigation plans for the TF39 or T56 engines because it is still assessing how the work will be performed

Phase-space interference in extensive and nonextensive quantum heat engines

NASA Astrophysics Data System (ADS)

Hardal, Ali Ü. C.; Paternostro, Mauro; Müstecaplıoǧlu, Özgür E.

2018-04-01

Quantum interference is at the heart of what sets the quantum and classical worlds apart. We demonstrate that quantum interference effects involving a many-body working medium is responsible for genuinely nonclassical features in the performance of a quantum heat engine. The features with which quantum interference manifests itself in the work output of the engine depends strongly on the extensive nature of the working medium. While identifying the class of work substances that optimize the performance of the engine, our results shed light on the optimal size of such media of quantum workers to maximize the work output and efficiency of quantum energy machines.

76 FR 10403 - Hewlett Packard (HP), Global Product Development, Engineering Workstation Refresh Team, Working...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-24

...), Global Product Development, Engineering Workstation Refresh Team, Working On-Site at General Motors... groups: The Non-Information Technology Business Development Team, the Engineering Application Support Team, and the Engineering Workstation Refresh Team. On February 2, 2011, the Department issued an...

Mathematical modeling of a four-stroke resonant engine for micro and mesoscale applications

NASA Astrophysics Data System (ADS)

Preetham, B. S.; Anderson, M.; Richards, C.

2014-12-01

In order to mitigate frictional and leakage losses in small scale engines, a compliant engine design is proposed in which the piston in cylinder arrangement is replaced by a flexible cavity. A physics-based nonlinear lumped-parameter model is derived to predict the performance of a prototype engine. The model showed that the engine performance depends on input parameters, such as heat input, heat loss, and load on the engine. A sample simulation for a reference engine with octane fuel/air ratio of 0.043 resulted in an indicated thermal efficiency of 41.2%. For a fixed fuel/air ratio, higher output power is obtained for smaller loads and vice-versa. The heat loss from the engine and the work done on the engine during the intake stroke are found to decrease the indicated thermal efficiency. The ratio of friction work to indicated work in the prototype engine is about 8%, which is smaller in comparison to the traditional reciprocating engines.

Effects of unique biomedical education programs for engineers: REDEEM and ESTEEM projects.

PubMed

Matsuki, Noriaki; Takeda, Motohiro; Yamano, Masahiro; Imai, Yohsuke; Ishikawa, Takuji; Yamaguchi, Takami

2009-06-01

Current engineering applications in the medical arena are extremely progressive. However, it is rather difficult for medical doctors and engineers to discuss issues because they do not always understand one another's jargon or ways of thinking. Ideally, medical engineers should become acquainted with medicine, and engineers should be able to understand how medical doctors think. Tohoku University in Japan has managed a number of unique reeducation programs for working engineers. Recurrent Education for the Development of Engineering Enhanced Medicine has been offered as a basic learning course since 2004, and Education through Synergetic Training for Engineering Enhanced Medicine has been offered as an advanced learning course since 2006. These programs, which were developed especially for engineers, consist of interactive, modular, and disease-based lectures (case studies) and substantial laboratory work. As a result of taking these courses, all students obtained better objective outcomes, on tests, and subjective outcomes, through student satisfaction. In this article, we report on our unique biomedical education programs for engineers and their effects on working engineers.

Perspectives and Plans for Graduate Studies. 11. Engineering 1974. E. Industrial Engineering and Systems Design. Report No. 74-22.

ERIC Educational Resources Information Center

Ontario Council on Graduate Studies, Toronto. Advisory Committee on Academic Planning.

On the instruction of the Council of Ontario Universities, the Advisory Committee on Academic Planning in cooperation with the Committee of Ontario Deans of Engineering has conducted a planning assessment for doctoral work in industrial engineering and systems design. Recommendations for doctoral work in engineering studies are presented.…

Linking First-Year and Senior Engineering Design Teams: Engaging Early Academic Career Students in Engineering Design

ERIC Educational Resources Information Center

Fox, Garey A.; Weckler, Paul; Thomas, Dan

2015-01-01

In Biosystems Engineering at Oklahoma State University, senior design is a two semester course in which students work on real-world projects provided by clients. First-year (freshmen and trans­fer) students enroll in an introductory engineering course. Historically, these students worked on a team-based analysis project, and the engineering design…

Structural Engineering: Overview

NASA Technical Reports Server (NTRS)

Castro, Edgar

2011-01-01

This slide presentation presents the work of the Structural Engineering Division of the Engineering Directorate. The work includes: providing technical expertise and leadership for the development, evaluation, and operation of structural, mechanical, and thermal spaceflight systems.

Guidelines for Engineering Teachers Concerning Educating the Engineer for Innovative and Entrepreneurial Activity.

ERIC Educational Resources Information Center

Eekels, J.

1987-01-01

Emphasizes that the concept of design is fundamental in innovation. Outlines the work of the European Society for Engineering Education-Working group on Innovation. Describes the innovation-management stream in the curriculum of the faculty of Industrial Design Engineering at Delft University of Technology, Netherlands. (CW)

Building Inclusive Engineering Identities: Implications for Changing Engineering Culture

ERIC Educational Resources Information Center

Atadero, Rebecca A.; Paguyo, Christina H.; Rambo-Hernandez, Karen E.; Henderson, Heather L.

2018-01-01

Ongoing efforts to broaden the participation of women and people of colour in engineering degree programmes and careers have had limited success. This paper describes a different approach to broadening participation that seeks to work with all students and develop inclusive engineering identities. Researchers worked with the instructors of two…

Savannah River Plant engineering, design, and construction history of ``S`` projects and other work, January 1961--December 1964. Volume 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1970-03-01

The work described in this volume of ``S`` Projects History is an extension of the type of work described in Volume I. E.I. du Pont de flemours & Company had entered into Contract AT (07-2)-l with the United States Atomic Energy Commission to develop, design, construct, install, and operate facilities to produce heavy water, fissionable materials, and related products. Under this contract,, Du Pont constructed and operated the Savannah River Plant. The engineering, design, and construction for most of the larger ``S`` projects was performed by the Engineering DeDartment. For some of the large and many of the smaller projectsmore » the Engineering Department was responsible only for the construction because the Atomic Energy Division (AED) of the Explosives Department handled the other phases. The Engineering Department Costruction Division also performed the physical work for many of the plant work orders. This volume includes a general description of the Du Pont Engineering Department activities pertaining to the engineering, design, and construction of the ``S`` projects at the Savannah River Plant; brief summaries of the projects and principal work requests; and supplementary informaticn on a few subjects in Volume I for which final data was not available at the closing date. Projects and other plant engineering work which were handled entirely by the Explosives Department -- AED are not included in this history.« less

Effects of Building a Sand Barrier Berm to Mitigate the Effects of the Deepwater Horizon Oil Spill on Louisiana Marshes

USGS Publications Warehouse

Lavoie, Dawn; Flocks, James G.; Kindinger, Jack G.; Sallenger, A.H.; Twichell, David C.

2010-01-01

The State of Louisiana requested emergency authorization on May 11, 2010, to perform spill mitigation work on the Chandeleur Islands and on all the barrier islands from Grand Terre Island eastward to Sandy Point to enhance the capability of the islands to reduce the movement of oil from the Deepwater Horizon oil spill to the marshes. The proposed action-building a barrier berm (essentially an artificial island fronting the existing barriers and inlets) seaward of the existing barrier islands and inlets-'restores' the protective function of the islands but does not alter the islands themselves. Building a barrier berm to protect the mainland wetlands from oil is a new strategy and depends on the timeliness of construction to be successful. Prioritizing areas to be bermed, focusing on those areas that are most vulnerable and where construction can be completed most rapidly, may increase chances for success. For example, it may be easier and more efficient to berm the narrow inlets of the coastal section to the west of the Mississippi River Delta rather than the large expanses of open water to the east of the delta in the southern parts of the Breton National Wildlife Refuge (NWR). This document provides information about the potential available sand resources and effects of berm construction on the existing barrier islands. The proposed project originally involved removing sediment from a linear source approximately 1 mile (1.6 km) gulfward of the barrier islands and placing it just seaward of the islands in shallow water (~2-m depth where possible) to form a continuous berm rising approximately 6 feet (~2 m) above sea level (North American Vertical Datum of 1988-NAVD88) with an ~110-yd (~100-m) width at water level and a slope of 25:1 to the seafloor. Discussions within the U.S. Geological Survey (USGS) and with others led to the determination that point-source locations, such as Hewes Point, the St. Bernard Shoals, and Ship Shoal, were more suitable 'borrow' locations because sand content is insufficient along a linear track offshore from most of Louisiana's barrier islands. Further, mining sediment near the toe of the barrier island platform or edge of actively eroding barrier islands could create pits in the seafloor that will capture nearshore sand, thereby enhancing island erosion, and focus incoming waves (for example, through refraction processes) that could yield hotspots of erosion. In the Breton NWR, the proposed berm would be continuous from just south of Hewes Point to Breton Island for approximately 100 km with the exception of several passages for vessel access. Proposed volume estimates by sources outside of the USGS suggest that the structure in the Breton NWR would contain approximately 56 million cubic yards (42.8 m3) of sandy material. In the west, the berm would require approximately 36 million cubic yards (27.5 m3) of sandy material because this area has less open water than the area to the east of the delta. The planned berm is intended to protect the islands and inland areas from oil and would be sacrificial; that is, it will rapidly erode through natural processes. It is not part of the coastal restoration plan long discussed in Louisiana to rebuild barrier islands for hurricane protection of mainland infrastructure and habitat.

Young Voices, Young Leadership: Native Americans in Engineering.

ERIC Educational Resources Information Center

Sorensen, Barbara

2001-01-01

An Odawa Indian woman who works as a process engineer is interviewed about her influences, college life, the college-to-work transition, her views on Indian leadership, and balancing work with other parts of life. Her booklet on survival skills for new engineers discusses adjusting to that first job, workplace conflict, gender differences, and…

48 CFR 1827.304-3 - Contracts for construction work or architect-engineer services. (NASA supplements paragraph (a))

Code of Federal Regulations, 2010 CFR

2010-10-01

... work or architect-engineer services. (NASA supplements paragraph (a)) 1827.304-3 Section 1827.304-3... REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patent Rights Under Government Contracts 1827.304-3 Contracts for construction work or architect-engineer services. (NASA supplements paragraph (a)) (a) For construction or...

Draftsmen at Work during Construction of the Aircraft Engine Research Laboratory

NASA Image and Video Library

1942-09-21

The National Advisory Committee for Aeronautics (NACA) Aircraft Engine Research Laboratory was designed by a group of engineers at the Langley Memorial Aeronautical Laboratory in late 1940 and 1941. Under the guidance of Ernest Whitney, the men worked on drawings and calculations in a room above Langley’s Structural Research Laboratory. The main Aircraft Engine Research Laboratory design group originally consisted of approximately 30 engineers and draftsmen, but there were smaller groups working separately on specific facilities. The new engine lab would have six principal buildings: the Engine Research Building, hangar, Fuels and Lubricants Building, Administration Building, Propeller Test Stand, and Altitude Wind Tunnel. In December 1941 most of those working on the project transferred to Cleveland from Langley. Harrison Underwood and Charles Egan led 18 architectural, 26 machine equipment, 3 structural and 10 mechanical draftsmen. Initially these staff members were housed in temporary offices in the hangar. As sections of the four-acre Engine Research Building were completed in the summer of 1942, the design team began relocating there. The Engine Research Building contained a variety of test cells and laboratories to address virtually every aspect of piston engine research. It also contained a two-story office wing, seen in this photograph that would later house many of the powerplant research engineers.

A Framework of Working Across Disciplines in Early Design and R&D of Large Complex Engineered Systems

NASA Technical Reports Server (NTRS)

McGowan, Anna-Maria Rivas; Papalambros, Panos Y.; Baker, Wayne E.

2015-01-01

This paper examines four primary methods of working across disciplines during R&D and early design of large-scale complex engineered systems such as aerospace systems. A conceptualized framework, called the Combining System Elements framework, is presented to delineate several aspects of cross-discipline and system integration practice. The framework is derived from a theoretical and empirical analysis of current work practices in actual operational settings and is informed by theories from organization science and engineering. The explanatory framework may be used by teams to clarify assumptions and associated work practices, which may reduce ambiguity in understanding diverse approaches to early systems research, development and design. The framework also highlights that very different engineering results may be obtained depending on work practices, even when the goals for the engineered system are the same.

Interdisciplinary Interactions During R&D and Early Design of Large Engineered Systems

NASA Technical Reports Server (NTRS)

McGowan, Anna-Maria Rivas

2014-01-01

Designing Large-Scale Complex Engineered Systems (LaCES) such as aircraft and submarines requires the input of thousands of engineers and scientists whose work is proximate in neither time nor space. Comprehensive knowledge of the system is dispersed among specialists whose expertise is in typically one system component or discipline. This study examined the interactive work practices among such specialists seeking to improve engineering practice through a rigorous and theoretical understanding of current practice. This research explored current interdisciplinary practices and perspectives during R&D and early LaCES design and identified why these practices and perspectives prevail and persist. The research design consisted of a three-fold, integrative approach that combined an open-ended survey, semi-structured interviews, and ethnography. Significant empirical data from experienced engineers and scientists in a large engineering organization were obtained and integrated with theories from organization science and engineering. Qualitative analysis was used to obtain a holistic, contextualized understanding. The over-arching finding is that issues related to cognition, organization, and social interrelations mostly dominate interactions across disciplines. Engineering issues, such as the integration of hardware or physics-based models, are not as significant. For example, organization culture is an important underlying factor that guided researchers more toward individual sovereignty over cross-disciplinarity. The organization structure and the engineered system architecture also serve as constraints to the engineering work. Many differences in work practices were observed, including frequency and depth of interactions, definition or co-construction of requirements, clarity or creation of the system architecture, work group proximity, and cognitive challenges. Practitioners are often unaware of these differences resulting in confusion and incorrect assumptions regarding work expectations. Cognitively, the enactment and coconstruction of knowledge are the fundamental tasks of the interdisciplinary interactions. Distributed and collective cognition represent most of the efforts. Argument, ignorance, learning, and creativity are interrelated aspects of the interactions that cause discomfort but yield benefits such as problem mitigation, broader understanding, and improved system design and performance. The quality and quantity of social interrelations are central to all work across disciplines with reciprocity, respectful engagement, and heedful interrelations being significant to the effectiveness of the engineering and scientific work.

Relationship of Prior Knowledge and Working Engineers' Learning Preferences: Implications for Designing Effective Instruction

ERIC Educational Resources Information Center

Baukal, Charles E.; Ausburn, Lynna J.

2017-01-01

Continuing engineering education (CEE) is important to ensure engineers maintain proficiency over the life of their careers. However, relatively few studies have examined designing effective training for working engineers. Research has indicated that both learner instructional preferences and prior knowledge can impact the learning process, but it…

40 CFR 86.1905 - How does this program work?

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES (CONTINUED) Manufacturer-Run In-Use Testing Program for Heavy-Duty Diesel Engines § 86.1905 How does this program work? (a) You must test in-use engines from the families we select. We may select the following number of engine...

40 CFR 86.1905 - How does this program work?

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES Manufacturer-Run In-Use Testing Program for Heavy-Duty Diesel Engines § 86.1905 How does this program work? (a) You must test in-use engines from the families we select. We may select the following number of engine families for...

40 CFR 86.1905 - How does this program work?

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES (CONTINUED) Manufacturer-Run In-Use Testing Program for Heavy-Duty Diesel Engines § 86.1905 How does this program work? (a) You must test in-use engines from the families we select. We may select the following number of engine...

33 CFR 211.7 - Rights which may be granted by Division and District Engineers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... WITH CIVIL WORKS PROJECTS Temporary Use by Others of Civil Works Real Estate § 211.7 Rights which may.... Division Engineers, the President of the Mississippi River Commission, and District Engineers of districts... of the Mississippi River Commission in granting leases and District Engineers will administer the...

Heritage stones and their deterioration in rock-cut monuments in India

NASA Astrophysics Data System (ADS)

Sharma, Vinod K.

2017-04-01

India is dotted with thousands of rock- cut monuments of considerable antiquity having artwork of global importance. It is evident from the location of many of these monuments that knowledge of viable selection of site, geotechnical considerations and amenability to sculptures' chisel was vital for construction of rock-cut monuments and sculptures. These rock-cut structures also represent significant achievements of geotechnical and structural engineering and craftsmanship of contemporary period. The paper deals with some of the sites where natural rock-mass exposures were used to hew the monuments and highlight the deterioration owing to geological and climatic conditions. The Kailash temple in Ellora and Ajanta rock-cut caves are among the greatest architectural feats which owe their grandeur to amenability and consistency of basalt of Deccan Volcanic Province from which it is hewn. The Kailash Temple was created through a single, huge top-down excavation 100 feet deep down into the volcanic basaltic cliff rock. These ancient rock cut structures are amazing achievements of structural engineering and craftsmanship. The lava flows are nearly horizontal, competent rock medium facilitated the chiseling for the sculptures. The deterioration of these basalts are seen where the amygdule, vesicles and opening in rock discontinuity had the medium of construction or excavation. The monolithic rock- cut monuments of Mahabalipuram temples are constructed in the form of rathas or chriot and adjoining caves by excavating solid charnockite/granites. The large rock exposures are excavated and cut to perfection with wall decorations and sculptured art. The charnockites are the strongest and the most durable rock, yet quite amenable to fine dressing. These monolithic monuments in charnockite and are cut out of the hillock. The 7th Century monuments now exhibit somewhat rough surface probably due to weathering effect of salt laden winds from the sea side and alteration of feldspars. The Rock shelters of Bhimbetka, a World Heritage Site, are located within Vindhyan sandstone, yielded primitive tools and decorative rock paintings.The rock-cut caves in twin hills Udayagiri and Khandagiri , contain carvings sculptured in coarse grained grey to buff coloured sandstone of Gondwana group of rocks. The Badami cave temples constructed out of escarpment of the hill in sandstone represent some of the earliest known examples of Hindu temples. Utilizing in situ rock exposures, natural rocks and landscape of Deccan basalts, granites of peninsular shield, sandstones and limestone for rock cut architecture in India, thus, holds varied examples of rock-cut architectures.

Engineering as a Social Activity: Preparing Engineers to Thrive in the Changing World of Work

ERIC Educational Resources Information Center

Joyner, Fredricka F.; Mann, Derek T. Y.; Harris, Todd

2012-01-01

Key macro-trends are combining to create a new work context for the practice of engineering. Telecommuting and virtual teams create myriad possibilities and challenges related to managing work and workers. Social network technology tools allow for unprecedented global, 24/7 collaboration. Globalization has created hyper-diverse organizations,…

The transformation of heat in an engine

NASA Technical Reports Server (NTRS)

Neumann, Kurt

1929-01-01

This report presents a thermodynamic basis for rating heat engines. The production of work by a heat engine rests on the operation of supplying heat, under favorable conditions, to a working fluid and then taking it away.

Methodology discourses as boundary work in the construction of engineering education.

PubMed

Beddoes, Kacey

2014-04-01

Engineering education research is a new field that emerged in the social sciences over the past 10 years. This analysis of engineering education research demonstrates that methodology discourses have played a central role in the construction and development of the field of engineering education, and that they have done so primarily through boundary work. This article thus contributes to science and technology studies literature by examining the role of methodology discourses in an emerging social science field. I begin with an overview of engineering education research before situating the case within relevant bodies of literature on methodology discourses and boundary work. I then identify two methodology discourses--rigor and methodological diversity--and discuss how they contribute to the construction and development of engineering education research. The article concludes with a discussion of how the findings relate to prior research on methodology discourses and boundary work and implications for future research.

Aircraft Flight Modeling During the Optimization of Gas Turbine Engine Working Process

NASA Astrophysics Data System (ADS)

Tkachenko, A. Yu; Kuz'michev, V. S.; Krupenich, I. N.

2018-01-01

The article describes a method for simulating the flight of the aircraft along a predetermined path, establishing a functional connection between the parameters of the working process of gas turbine engine and the efficiency criteria of the aircraft. This connection is necessary for solving the optimization tasks of the conceptual design stage of the engine according to the systems approach. Engine thrust level, in turn, influences the operation of aircraft, thus making accurate simulation of the aircraft behavior during flight necessary for obtaining the correct solution. The described mathematical model of aircraft flight provides the functional connection between the airframe characteristics, working process of gas turbine engines (propulsion system), ambient and flight conditions and flight profile features. This model provides accurate results of flight simulation and the resulting aircraft efficiency criteria, required for optimization of working process and control function of a gas turbine engine.

Quantum Stirling heat engine and refrigerator with single and coupled spin systems

NASA Astrophysics Data System (ADS)

Huang, Xiao-Li; Niu, Xin-Ya; Xiu, Xiao-Ming; Yi, Xue-Xi

2014-02-01

We study the reversible quantum Stirling cycle with a single spin or two coupled spins as the working substance. With the single spin as the working substance, we find that under certain conditions the reversed cycle of a heat engine is NOT a refrigerator, this feature holds true for a Stirling heat engine with an ion trapped in a shallow potential as its working substance. The efficiency of quantum Stirling heat engine can be higher than the efficiency of the Carnot engine, but the performance coefficient of the quantum Stirling refrigerator is always lower than its classical counterpart. With two coupled spins as the working substance, we find that a heat engine can turn to a refrigerator due to the increasing of the coupling constant, this can be explained by the properties of the isothermal line in the magnetic field-entropy plane.

Work and power fluctuations in a critical heat engine.

PubMed

Holubec, Viktor; Ryabov, Artem

2017-09-01

We investigate fluctuations of output work for a class of Stirling heat engines with working fluid composed of interacting units and compare these fluctuations to an average work output. In particular, we focus on engine performance close to a critical point where Carnot's efficiency may be attained at a finite power as reported by M. Campisi and R. Fazio [Nat. Commun. 7, 11895 (2016)2041-172310.1038/ncomms11895]. We show that the variance of work output per cycle scales with the same critical exponent as the heat capacity of the working fluid. As a consequence, the relative work fluctuation diverges unless the output work obeys a rather strict scaling condition, which would be very hard to fulfill in practice. Even under this condition, the fluctuations of work and power do not vanish in the infinite system size limit. Large fluctuations of output work thus constitute inseparable and dominant element in performance of the macroscopic heat engines close to a critical point.

Work and power fluctuations in a critical heat engine

NASA Astrophysics Data System (ADS)

Holubec, Viktor; Ryabov, Artem

2017-09-01

We investigate fluctuations of output work for a class of Stirling heat engines with working fluid composed of interacting units and compare these fluctuations to an average work output. In particular, we focus on engine performance close to a critical point where Carnot's efficiency may be attained at a finite power as reported by M. Campisi and R. Fazio [Nat. Commun. 7, 11895 (2016), 10.1038/ncomms11895]. We show that the variance of work output per cycle scales with the same critical exponent as the heat capacity of the working fluid. As a consequence, the relative work fluctuation diverges unless the output work obeys a rather strict scaling condition, which would be very hard to fulfill in practice. Even under this condition, the fluctuations of work and power do not vanish in the infinite system size limit. Large fluctuations of output work thus constitute inseparable and dominant element in performance of the macroscopic heat engines close to a critical point.

Optimal tuning of a confined Brownian information engine.

PubMed

Park, Jong-Min; Lee, Jae Sung; Noh, Jae Dong

2016-03-01

A Brownian information engine is a device extracting mechanical work from a single heat bath by exploiting the information on the state of a Brownian particle immersed in the bath. As for engines, it is important to find the optimal operating condition that yields the maximum extracted work or power. The optimal condition for a Brownian information engine with a finite cycle time τ has been rarely studied because of the difficulty in finding the nonequilibrium steady state. In this study, we introduce a model for the Brownian information engine and develop an analytic formalism for its steady-state distribution for any τ. We find that the extracted work per engine cycle is maximum when τ approaches infinity, while the power is maximum when τ approaches zero.

Multi-cylinder hot gas engine

DOEpatents

Corey, John A.

1985-01-01

A multi-cylinder hot gas engine having an equal angle, V-shaped engine block in which two banks of parallel, equal length, equally sized cylinders are formed together with annular regenerator/cooler units surrounding each cylinder, and wherein the pistons are connected to a single crankshaft. The hot gas engine further includes an annular heater head disposed around a central circular combustor volume having a new balanced-flow hot-working-fluid manifold assembly that provides optimum balanced flow of the working fluid through the heater head working fluid passageways which are connected between each of the cylinders and their respective associated annular regenerator units. This balanced flow provides even heater head temperatures and, therefore, maximum average working fluid temperature for best operating efficiency with the use of a single crankshaft V-shaped engine block.

Stirling engine with air working fluid

DOEpatents

Corey, John A.

1985-01-01

A Stirling engine capable of utilizing air as a working fluid which includes a compact heat exchange module which includes heating tube units, regenerator and cooler positioned about the combustion chamber. This arrangement has the purpose and effect of allowing the construction of an efficient, high-speed, high power-density engine without the use of difficult to seal light gases as working fluids.

Mechanical equivalent of quantum heat engines.

PubMed

Arnaud, Jacques; Chusseau, Laurent; Philippe, Fabrice

2008-06-01

Quantum heat engines employ as working agents multilevel systems instead of classical gases. We show that under some conditions quantum heat engines are equivalent to a series of reservoirs at different altitudes containing balls of various weights. A cycle consists of picking up at random a ball from one reservoir and carrying it to the next, thereby performing or absorbing some work. In particular, quantum heat engines, employing two-level atoms as working agents, are modeled by reservoirs containing balls of weight 0 or 1. The mechanical model helps us prove that the maximum efficiency of quantum heat engines is the Carnot efficiency. Heat pumps and negative temperatures are considered.

Harmonic engine

DOEpatents

Bennett, Charles L [Livermore, CA

2009-10-20

A high efficiency harmonic engine based on a resonantly reciprocating piston expander that extracts work from heat and pressurizes working fluid in a reciprocating piston compressor. The engine preferably includes harmonic oscillator valves capable of oscillating at a resonant frequency for controlling the flow of working fluid into and out of the expander, and also preferably includes a shunt line connecting an expansion chamber of the expander to a buffer chamber of the expander for minimizing pressure variations in the fluidic circuit of the engine. The engine is especially designed to operate with very high temperature input to the expander and very low temperature input to the compressor, to produce very high thermal conversion efficiency.

General formalism of local thermodynamics with an example: Quantum Otto engine with a spin-1/2 coupled to an arbitrary spin.

PubMed

Altintas, Ferdi; Müstecaplıoğlu, Özgür E

2015-08-01

We investigate a quantum heat engine with a working substance of two particles, one with a spin-1/2 and the other with an arbitrary spin (spin s), coupled by Heisenberg exchange interaction, and subject to an external magnetic field. The engine operates in a quantum Otto cycle. Work harvested in the cycle and its efficiency are calculated using quantum thermodynamical definitions. It is found that the engine has higher efficiencies at higher spins and can harvest work at higher exchange interaction strengths. The role of exchange coupling and spin s on the work output and the thermal efficiency is studied in detail. In addition, the engine operation is analyzed from the perspective of local work and efficiency. We develop a general formalism to explore local thermodynamics applicable to any coupled bipartite system. Our general framework allows for examination of local thermodynamics even when global parameters of the system are varied in thermodynamic cycles. The generalized definitions of local and cooperative work are introduced by using mean field Hamiltonians. The general conditions for which the global work is not equal to the sum of the local works are given in terms of the covariance of the subsystems. Our coupled spin quantum Otto engine is used as an example of the general formalism.

General formalism of local thermodynamics with an example: Quantum Otto engine with a spin-1 /2 coupled to an arbitrary spin

NASA Astrophysics Data System (ADS)

Altintas, Ferdi; Müstecaplıoǧlu, Ã.-zgür E.

2015-08-01

We investigate a quantum heat engine with a working substance of two particles, one with a spin-1 /2 and the other with an arbitrary spin (spin s ), coupled by Heisenberg exchange interaction, and subject to an external magnetic field. The engine operates in a quantum Otto cycle. Work harvested in the cycle and its efficiency are calculated using quantum thermodynamical definitions. It is found that the engine has higher efficiencies at higher spins and can harvest work at higher exchange interaction strengths. The role of exchange coupling and spin s on the work output and the thermal efficiency is studied in detail. In addition, the engine operation is analyzed from the perspective of local work and efficiency. We develop a general formalism to explore local thermodynamics applicable to any coupled bipartite system. Our general framework allows for examination of local thermodynamics even when global parameters of the system are varied in thermodynamic cycles. The generalized definitions of local and cooperative work are introduced by using mean field Hamiltonians. The general conditions for which the global work is not equal to the sum of the local works are given in terms of the covariance of the subsystems. Our coupled spin quantum Otto engine is used as an example of the general formalism.

7 CFR 1724.6 - Insurance requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES General § 1724.6 Insurance requirements. (a) Borrowers shall ensure that all architects and engineers working under contract... also ensure that all architects and engineers working under contract with the borrower have insurance...

7 CFR 1724.6 - Insurance requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES General § 1724.6 Insurance requirements. (a) Borrowers shall ensure that all architects and engineers working under contract... also ensure that all architects and engineers working under contract with the borrower have insurance...

7 CFR 1724.6 - Insurance requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES General § 1724.6 Insurance requirements. (a) Borrowers shall ensure that all architects and engineers working under contract... also ensure that all architects and engineers working under contract with the borrower have insurance...

7 CFR 1724.6 - Insurance requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES General § 1724.6 Insurance requirements. (a) Borrowers shall ensure that all architects and engineers working under contract... also ensure that all architects and engineers working under contract with the borrower have insurance...

7 CFR 1724.6 - Insurance requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES General § 1724.6 Insurance requirements. (a) Borrowers shall ensure that all architects and engineers working under contract... also ensure that all architects and engineers working under contract with the borrower have insurance...

Dual compile strategy for parallel heterogeneous execution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Tyler Barratt; Perry, James Thomas

2012-06-01

The purpose of the Dual Compile Strategy is to increase our trust in the Compute Engine during its execution of instructions. This is accomplished by introducing a heterogeneous Monitor Engine that checks the execution of the Compute Engine. This leads to the production of a second and custom set of instructions designed for monitoring the execution of the Compute Engine at runtime. This use of multiple engines differs from redundancy in that one engine is working on the application while the other engine is monitoring and checking in parallel instead of both applications (and engines) performing the same work atmore » the same time.« less

78 FR 11728 - Aviation Rulemaking Advisory Committee; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-19

... Working Groups a. Airman Testing Standards and Training Working Group (ARAC) b. Flight Controls Harmonization Working Group (Transport Airplane and Engine Subcommittee [TAE]) c. Airworthiness Assurance Working Group (TAE) 3. New Tasks a. Engine Bird Ingestion Requirements--Revision of Section 33.76 b...

Laser engines operating by resonance absorption. [thermodynamic feasibility study

NASA Technical Reports Server (NTRS)

Garbuny, M.; Pechersky, M. J.

1976-01-01

Basic tutorial article on the thermodynamic feasibility of laser engines at the present state of the art. Three main options are considered: (1) laser power applied externally to a heat reservoir (boiler approach); (2) internal heating of working fluid by resonance absorption; and (3) direct conversion of selective excitation into work. Only (2) is considered practically feasible at present. Basic concepts and variants, efficiency relations, upper temperature limits of laser engines, selection of absorbing gases, engine walls, bleaching, thermodynamic cycles of optimized laser engines, laser-powered turbines, laser heat pumps are discussed. Photon engines and laser dissociation engines are also considered.

Two-stroke S.I. engine competitive to four-stroke engine in terms of the exhaust emission

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pavletic, R.; Trenc, F.

1994-09-01

A model engine with disintegrated working cycle was built. Its operation is not autonomous; compression of the working air is performed separately outside the engine by the compressed-air line supply. Pre-compressed charge together with the injected fuel is introduced in the combustion chamber. The model engine makes possible to determine indicated performance characteristics and its emission capability. Effective measured engine characteristics are of course not comparable with those obtained by a practical engine. The model presented is a two-stroke cycle engine. Exhaust emission picture of the presented engine is comparable with the emission of a modern four-stroke engine. 2 refs.,more » 13 figs., 2 tabs.« less

Single-temperature quantum engine without feedback control.

PubMed

Yi, Juyeon; Talkner, Peter; Kim, Yong Woon

2017-08-01

A cyclically working quantum-mechanical engine that operates at a single temperature is proposed. Its energy input is delivered by a quantum measurement. The functioning of the engine does not require any feedback control. We analyze work, heat, and the efficiency of the engine for the case of a working substance that is governed by the laws of quantum mechanics and that can be adiabatically compressed and expanded. The obtained general expressions are exemplified for a spin in an adiabatically changing magnetic field and a particle moving in a potential with slowly changing shape.

Introducing a new semi-active engine mount using force controlled variable stiffness

NASA Astrophysics Data System (ADS)

Azadi, Mojtaba; Behzadipour, Saeed; Faulkner, Gary

2013-05-01

This work introduces a new concept in designing semi-active engine mounts. Engine mounts are under continuous development to provide better and more cost-effective engine vibration control. Passive engine mounts do not provide satisfactory solution. Available semi-active and active mounts provide better solutions but they are more complex and expensive. The variable stiffness engine mount (VSEM) is a semi-active engine mount with a simple ON-OFF control strategy. However, unlike available semi-active engine mounts that work based on damping change, the VSEM works based on the static stiffness change by using a new fast response force controlled variable spring. The VSEM is an improved version of the vibration mount introduced by the authors in their previous work. The results showed significant performance improvements over a passive rubber mount. The VSEM also provides better vibration control than a hydromount at idle speed. Low hysteresis and the ability to be modelled by a linear model in low-frequency are the advantages of the VSEM over the vibration isolator introduced earlier and available hydromounts. These specifications facilitate the use of VSEM in the automotive industry, however, further evaluation and developments are needed for this purpose.

Diesel Engine Technician

ERIC Educational Resources Information Center

Tech Directions, 2010

2010-01-01

Diesel engine technicians maintain and repair the engines that power transportation equipment such as heavy trucks, trains, buses, and locomotives. Some technicians work mainly on farm machines, ships, compressors, and pumps. Others work mostly on construction equipment such as cranes, power shovels, bulldozers, and paving machines. This article…

The second law of thermodynamics and quantum heat engines: Is the law strictly enforced?

NASA Astrophysics Data System (ADS)

Keefe, Peter D.

2010-01-01

A quantum heat engine is a construct having a working medium which is cyclically processed through a pair of control variables of state involving a Bose-Einstein condensation (BEC) in which a heat input is converted into a work output. Of interest is a first species of quantum heat engine in which the working medium is macroscopic in the sense the size scale is sufficiently large that the BEC is not volumetrically coherent. In this first species of quantum heat engine, near Carnot efficiencies may be possible. Of particular interest is a second species of quantum heat engine in which the working medium is mesoscopic in the sense that the size scale is sufficiently small that the BEC is volumetrically coherent. In this second species of quantum heat engine, the resulting in-process non-equilibrium condition affects the finally arrived at control variables of state such that Carnot efficiencies and beyond may be possible. A Type I superconductor is used to model the first and second species of quantum heat engine.

Analysis of heat recovery of diesel engine using intermediate working fluid

NASA Astrophysics Data System (ADS)

Jin, Lei; Zhang, Jiang; Tan, Gangfeng; Liu, Huaming

2017-07-01

The organic Rankine cycle (ORC) is an effective way to recovery the engine exhaust heat. The thermal stability of the evaporation system is significant for the stable operation of the ORC system. In this paper, the performance of the designed evaporation system which combines with the intermediate fluid for recovering the exhaust waste heat from a diesel engine is evaluated. The thermal characteristics of the target diesel engine exhaust gas are evaluated based on the experimental data firstly. Then, the mathematical model of the evaporation system is built based on the geometrical parameters and the specific working conditions of ORC. Finally, the heat transfer characteristics of the evaporation system are estimated corresponding to three typical operating conditions of the diesel engine. The result shows that the exhaust temperature at the evaporator outlet increases slightly with the engine speed and load. In the evaporator, the heat transfer coefficient of the Rankine working fluid is slightly larger than the intermediate fluid. However, the heat transfer coefficient of the intermediate fluid in the heat exchanger is larger than the exhaust side. The heat transfer areas of the evaporator in both the two-phase zone and the preheated zone change slightly along with the engine working condition while the heat transfer areas of the overheated zone has changed obviously. The maximum heat transfer rate occurs in the preheating zone while the minimum value occurs in the overheating zone. In addition, the Rankine working fluid temperature at the evaporator outlet is not sensitively affected by the torque and speed of the engine and the organic fluid flow is relatively stable. It is concluded that the intermediate fluid could effectively reduce the physical changes of Rankine working fluid in the evaporator outlet due to changes in engine operating conditions.

21. Engine identified as a 'single cylinder vacuum assist engine ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. Engine identified as a 'single cylinder vacuum assist engine for Tod tandem compound engine' showing compressor. - Carnegie Steel-Ohio Works, Steam Engines, 912 Salt Springs Road, Youngstown, Mahoning County, OH

Quantum Otto heat engine with three-qubit XXZ model as working substance

NASA Astrophysics Data System (ADS)

Huang, X. L.; Sun, Qi; Guo, D. Y.; Yu, Qian

2018-02-01

A quantum Otto heat engine is established with a three-qubit Heisenberg XXZ model with Dzyaloshinskii-Moriya (DM) interaction under a homogeneous magnetic field as the working substance. The quantum Otto engine is composed of two quantum isochoric processes and two quantum adiabatic processes. Here we have restricted Bc /Bh =Jc /Jh = r in the two adiabatic processes, where r is the adiabatic compression ratio. The work output and efficiency are calculated for our cycle. The possible adiabatic compression ratios and the ratios of work output between our working substance and a single spin under the same external conditions in the Otto cycle are analyzed with different DM interaction parameters and anisotropic parameters. The effects of pairwise entanglements on the heat engine efficiency are discussed.

POLLUTION PREVENTION OPPORTUNITY ASSESSMENT OF THE U.S. ARMY CORPS OF ENGINEERS CIVIL WORKS FACILITIES

EPA Science Inventory

The Pollution Prevention Opportunity Assessments (PPOA) summarized here were conducted at the following representative Army Corps of Engineers (USAGE) Civil Works facilities: Pittsburgh Engineering Warehouse and Repair Station (PEWARS) and Emsworth Locks and Dams in Pittsburgh, P...

Evan Weaver | NREL

Science.gov Websites

Evan Weaver Photo of Evan Weaver Evan Weaver Researcher III-Software Engineering Evan.Weaver , he works as a software engineer developing whole-building energy modeling tools. Prior to joining NREL, he worked in the biomedical industry as a software engineer, specializing in graphical user

7 CFR 1724.32 - Inspection and certification of work order construction.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Engineering Services § 1724.32 Inspection and certification of work order... accordance with acceptable engineering practice. (2) A certification must also include the name of the...

7 CFR 1724.32 - Inspection and certification of work order construction.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Engineering Services § 1724.32 Inspection and certification of work order... accordance with acceptable engineering practice. (2) A certification must also include the name of the...

7 CFR 1724.32 - Inspection and certification of work order construction.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Engineering Services § 1724.32 Inspection and certification of work order... accordance with acceptable engineering practice. (2) A certification must also include the name of the...

20. Engine identified as a 'single cylinder vacuum assist engine ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. Engine identified as a 'single cylinder vacuum assist engine for the Tod tandem compound engine' showing crank end. - Carnegie Steel-Ohio Works, Steam Engines, 912 Salt Springs Road, Youngstown, Mahoning County, OH

NASA systems engineering handbook

NASA Astrophysics Data System (ADS)

Shishko, Robert; Aster, Robert; Chamberlain, Robert G.; McDuffee, Patrick; Pieniazek, Les; Rowell, Tom; Bain, Beth; Cox, Renee I.; Mooz, Harold; Polaski, Lou

1995-06-01

This handbook brings the fundamental concepts and techniques of systems engineering to NASA personnel in a way that recognizes the nature of NASA systems and environment. It is intended to accompany formal NASA training courses on systems engineering and project management when appropriate, and is designed to be a top-level overview. The concepts were drawn from NASA field center handbooks, NMI's/NHB's, the work of the NASA-wide Systems Engineering Working Group and the Systems Engineering Process Improvement Task team, several non-NASA textbooks and guides, and material from independent systems engineering courses taught to NASA personnel. Five core chapters cover systems engineering fundamentals, the NASA Project Cycle, management issues in systems engineering, systems analysis and modeling, and specialty engineering integration. It is not intended as a directive.

More bang for your buck: super-adiabatic quantum engines.

PubMed

del Campo, A; Goold, J; Paternostro, M

2014-08-28

The practical untenability of the quasi-static assumption makes any realistic engine intrinsically irreversible and its operating time finite, thus implying friction effects at short cycle times. An important technological goal is thus the design of maximally efficient engines working at the maximum possible power. We show that, by utilising shortcuts to adiabaticity in a quantum engine cycle, one can engineer a thermodynamic cycle working at finite power and zero friction. Our findings are illustrated using a harmonic oscillator undergoing a quantum Otto cycle.

More bang for your buck: Super-adiabatic quantum engines

PubMed Central

Campo, A. del; Goold, J.; Paternostro, M.

2014-01-01

The practical untenability of the quasi-static assumption makes any realistic engine intrinsically irreversible and its operating time finite, thus implying friction effects at short cycle times. An important technological goal is thus the design of maximally efficient engines working at the maximum possible power. We show that, by utilising shortcuts to adiabaticity in a quantum engine cycle, one can engineer a thermodynamic cycle working at finite power and zero friction. Our findings are illustrated using a harmonic oscillator undergoing a quantum Otto cycle. PMID:25163421

Multimedia Category Preferences of Working Engineers

ERIC Educational Resources Information Center

Baukal, Charles E., Jr.; Ausburn, Lynna J.

2016-01-01

Many have argued for the importance of continuing engineering education (CEE), but relatively few recommendations were found in the literature for how to use multimedia technologies to deliver it most effectively. The study reported here addressed this gap by investigating the multimedia category preferences of working engineers. Four categories…

77 FR 59243 - Aviation Rulemaking Advisory Committee Meeting on Transport Airplane and Engine Issues

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-26

... Committee Meeting on Transport Airplane and Engine Issues AGENCY: Federal Aviation Administration (FAA), DOT... Rulemaking Advisory Committee (ARAC) to discuss transport airplane and engine (TAE) issues. DATES: The... Prioritization Working Group Transport Canada Report Materials Flammability Working Group Report Avionics...

How Middle Schoolers Draw Engineers and Scientists

NASA Astrophysics Data System (ADS)

Fralick, Bethany; Kearn, Jennifer; Thompson, Stephen; Lyons, Jed

2009-02-01

The perceptions young students have of engineers and scientists are often populated with misconceptions and stereotypes. Although the perceptions that young people have of engineers and of scientists have been investigated separately, they have not been systematically compared. The research reported in this paper explores the question "How are student perceptions of engineers and scientists similar and how are they different?" Approximately 1,600 middle school students from urban and suburban schools in the southeastern United States were asked to draw either an engineer or a scientist at work. Drawings included space for the students to explain what their person was doing in the picture. A checklist to code the drawings was developed and used by two raters. This paper discusses similarities and differences in middle school perceptions of scientists and engineers. Results reveal that the students involved in this study frequently perceive scientists as working indoors conducting experiments. A large fraction of the students have no perception of engineering. Others frequently perceive engineers as working outdoors in manual labor. The findings have implications for the development and implementation of engineering outreach efforts.

Predicting on-site environmental impacts of municipal engineering works

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gangolells, Marta, E-mail: marta.gangolells@upc.edu; Casals, Miquel, E-mail: miquel.casals@upc.edu; Forcada, Núria, E-mail: nuria.forcada@upc.edu

2014-01-15

The research findings fill a gap in the body of knowledge by presenting an effective way to evaluate the significance of on-site environmental impacts of municipal engineering works prior to the construction stage. First, 42 on-site environmental impacts of municipal engineering works were identified by means of a process-oriented approach. Then, 46 indicators and their corresponding significance limits were determined on the basis of a statistical analysis of 25 new-build and remodelling municipal engineering projects. In order to ensure the objectivity of the assessment process, direct and indirect indicators were always based on quantitative data from the municipal engineering projectmore » documents. Finally, two case studies were analysed and found to illustrate the practical use of the proposed model. The model highlights the significant environmental impacts of a particular municipal engineering project prior to the construction stage. Consequently, preventive actions can be planned and implemented during on-site activities. The results of the model also allow a comparison of proposed municipal engineering projects and alternatives with respect to the overall on-site environmental impact and the absolute importance of a particular environmental aspect. These findings are useful within the framework of the environmental impact assessment process, as they help to improve the identification and evaluation of on-site environmental aspects of municipal engineering works. The findings may also be of use to construction companies that are willing to implement an environmental management system or simply wish to improve on-site environmental performance in municipal engineering projects. -- Highlights: • We present a model to predict the environmental impacts of municipal engineering works. • It highlights significant on-site environmental impacts prior to the construction stage. • Findings are useful within the environmental impact assessment process. • They also help contractors to implement environmental management systems.« less

Measurement of Work Generation and Improvement in Performance of a Pulse Tube Engine

NASA Astrophysics Data System (ADS)

Hamaguchi, Kazuhiro; Futagi, Hiroaki; Yazaki, Taichi; Hiratsuka, Yoshikatsu

Apart from double acting type engines, Stirling engines have either 2 pistons in 2 cylinders or 2 pistons in a single cylinder. Typically, the heater, regenerator and cooler are installed between the 2 pistons. The pulse tube engine, on the other hand, consists of a single piston in a single cylinder, a pulse tube, a heater, a regenerator, a cooler and a second cooler. For this paper, a simple prototype engine that uses air at normal atmospheric pressure as the working gas was fabricated. The oscillating velocity of the working gas in the pulse tube was measured using LDV, and the work flow emitting out of the pulse tube was observed. In addition, the effect of inserting heat storage material in the pulse tube on shaft power and indicated power was examined experimentally. A dramatic increase in the shaft power was achieved.

A national collaboration process: Finnish engineering education for the benefit of people and environment.

PubMed

Takala, A; Korhonen-Yrjänheikki, K

2013-12-01

The key stakeholders of the Finnish engineering education collaborated during 2006-09 to reform the system of education, to face the challenges of the changing business environment and to create a national strategy for the Finnish engineering education. The work process was carried out using participatory work methods. Impacts of sustainable development (SD) on engineering education were analysed in one of the subprojects. In addition to participatory workshops, the core part of the work on SD consisted of a research with more than 60 interviews and an extensive literature survey. This paper discusses the results of the research and the work process of the Collaboration Group in the subproject of SD. It is suggested that enhancing systematic dialogue among key stakeholders using participatory work methods is crucial in increasing motivation and commitment in incorporating SD in engineering education. Development of the context of learning is essential for improving skills of engineering graduates in some of the key abilities related to SD: systemic- and life-cycle thinking, ethical understanding, collaborative learning and critical reflection skills. This requires changing of the educational paradigm from teacher-centred to learner-centred applying problem- and project-oriented active learning methods.

Assessment of potential asbestos exposures from jet engine overhaul work.

PubMed

Mlynarek, S P; Van Orden, D R

2012-06-01

Asbestos fibers have been used in a wide variety of products and numerous studies have shown that exposures from the use or manipulation of these products can vary widely. Jet engines contained various components (gaskets, clamps, o-rings and insulation) that contained asbestos that potentially could release airborne fibers during routine maintenance or during an engine overhaul. To evaluate the potential exposures to aircraft mechanics, a Pratt & Whitney JT3D jet engine was obtained and overhauled by experienced mechanics using tools and work practices similar to those used since the time this engine was manufactured. This study has demonstrated that the disturbance of asbestos-containing gaskets, o-rings, and other types of asbestos-containing components, while performing overhaul work to a jet engine produces very few airborne fibers, and that virtually none of these aerosolized fibers is asbestos. The overhaul work was observed to be dirty and oily. The exposures to the mechanics and bystanders were several orders of magnitude below OSHA exposure regulations, both current and historic. The data presented underscore the lack of risk to the health of persons conducting this work and to other persons in proximity to it from airborne asbestos. Copyright © 2012 Elsevier Inc. All rights reserved.

CIVIL ENGINEERS' ROLES IN PUBLIC WORKS

NASA Astrophysics Data System (ADS)

Murata, Teruaki

Recently, the public interests are becoming high in the way of executing public works and the future direction of infrastructure development, which raises nation-wide discussion on these issues. How should we make our country's growth strategy for sustainable development? How should we realize the grand design of infrastructure needed for the implementation of such a strategy? It is obvious that further discussions are needed for these challenging questions. With an aim to promote such discussions, this paper reviews the history of public works and the professional practices (or accomplishments) of our great civil engineers, and discusses the future of public works and the roles of civil engineers based on their origin. Further, in this paper, the author, as the chairman of the Public Works Committee of Japan Civil Engineering Contractors Association, introduces the Association's proposal of "realization of an attractive construction industry." However, for its realization, sustainable institutional arrangements under social consensus are indispensable. Also, individual engineer must establish his/her own identity based on sense of social ethics. It is the author's hope that, through these journals, the professional practices of civil engineers will be widely known to the public with objective logics and discussed to achieve social consensus.

Relationship of prior knowledge and working engineers' learning preferences: implications for designing effective instruction

NASA Astrophysics Data System (ADS)

Baukal, Charles E.; Ausburn, Lynna J.

2017-05-01

Continuing engineering education (CEE) is important to ensure engineers maintain proficiency over the life of their careers. However, relatively few studies have examined designing effective training for working engineers. Research has indicated that both learner instructional preferences and prior knowledge can impact the learning process, but it has not established if these factors are interrelated. The study reported here considered relationships of prior knowledge and three aspects of learning preferences of working engineers at a manufacturing company: learning strategy choices, verbal-visual cognitive styles, and multimedia preferences. Prior knowledge was not found to be significantly related to engineers' learning preferences, indicating independence of effects of these variables on learning. The study also examined relationships of this finding to the Multimedia Cone of Abstraction and implications for its use as an instructional design tool for CEE.

40 CFR 80.1450 - What are the registration requirements under the RFS program?

Code of Federal Regulations, 2013 CFR

2013-07-01

... professional work experience in the chemical engineering field or related to renewable fuel production. (B) For... third-party engineering review and written report and verification of the information provided pursuant... professional engineer licensed in the United States with professional work experience in the chemical...

Systems Engineering Leadership Development: Advancing Systems Engineering Excellence

NASA Technical Reports Server (NTRS)

Hall, Phil; Whitfield, Susan

2011-01-01

This slide presentation reviews the Systems Engineering Leadership Development Program, with particular emphasis on the work being done in the development of systems engineers at Marshall Space Flight Center. There exists a lack of individuals with systems engineering expertise, in particular those with strong leadership capabilities, to meet the needs of the Agency's exploration agenda. Therefore there is a emphasis on developing these programs to identify and train systems engineers. The presentation reviews the proposed MSFC program that includes course work, and developmental assignments. The formal developmental programs at the other centers are briefly reviewed, including the Point of Contact (POC)

Efficiencies and coefficients of performance of heat engines, refrigerators, and heat pumps with friction: a universal limiting behavior.

PubMed

Bizarro, João P S; Rodrigues, Paulo

2012-11-01

For work-producing heat engines, or work-consuming refrigerators and heat pumps, the percentage decrease caused by friction in their efficiencies, or coefficients of performance (COP's), is approximately given by the ratio W(fric)/W between the work spent against friction forces and the work performed by, or delivered to, the working fluid. This universal scaling, which applies in the limit of small friction (W(fric)/W

KSC-2012-6224

NASA Image and Video Library

2012-11-09

CAPE CANAVERAL, Fla. -- At the Neo Liquid Propellant Testbed inside a facility near Kennedy Space Center’s Shuttle Landing Facility in Florida, engineers are working on the buildup of the Neo test fixture and an Injector 71 engine that uses super-cooled propellants. NASA engineers are working on the design and assembly of the Neo Liquid Propellant Testbed as part of the Engineering Directorate’s Rocket University training program. Photo credit: NASA/Frankie Martin

KSC-2012-6223

NASA Image and Video Library

2012-11-09

CAPE CANAVERAL, Fla. -- At the Neo Liquid Propellant Testbed inside a facility near Kennedy Space Center’s Shuttle Landing Facility in Florida, engineers are working on the buildup of the Neo test fixture and an Injector 71 engine that uses super-cooled propellants. NASA engineers are working on the design and assembly of the Neo Liquid Propellant Testbed as part of the Engineering Directorate’s Rocket University training program. Photo credit: NASA/Frankie Martin

Mathematical modeling of the Stirling engine in terms of applying the composition of the power complex containing non-conventional and renewable energy

NASA Astrophysics Data System (ADS)

Gaponenko, A. M.; Kagramanova, A. A.

2017-11-01

The opportunity of application of Stirling engine with non-conventional and renewable sources of energy. The advantage of such use. The resulting expression for the thermal efficiency of the Stirling engine. It is shown that the work per cycle is proportional to the quantity of matter, and hence the pressure of the working fluid, the temperature difference and, to a lesser extent, depends on the expansion coefficient; efficiency of ideal Stirling cycle coincides with the efficiency of an ideal engine working on the Carnot cycle, which distinguishes a Stirling cycle from the cycles of Otto and Diesel underlying engine. It has been established that the four input parameters, the only parameter which can be easily changed during operation, and which effectively affects the operation of the engine is the phase difference. Dependence of work per cycle of the phase difference, called the phase characteristic, visually illustrates mode of operation of Stirling engine. The mathematical model of the cycle of Schmidt and the analysis of operation of Stirling engine in the approach of Schmidt with the aid of numerical analysis. To conduct numerical experiments designed program feature in the language MathLab. The results of numerical experiments are illustrated by graphical charts.

Optical engineering capstone design projects with industry sponsors

NASA Astrophysics Data System (ADS)

Bunch, Robert M.; Leisher, Paul O.; Granieri, Sergio C.

2014-09-01

Capstone senior design is the culmination of a student's undergraduate engineering education that prepares them for engineering practice. In fact, any engineering degree program that pursues accreditation by the Engineering Accreditation Commission of ABET must contain "a major design experience based on the knowledge and skills acquired in earlier course work and incorporating appropriate engineering standards and multiple realistic constraints." At Rose-Hulman, we offer an interdisciplinary Optical Engineering / Engineering Physics senior design curriculum that meets this requirement. Part of this curriculum is a two-course sequence where students work in teams on a design project leading to a functional prototype. The students begin work on their capstone project during the first week of their senior year. The courses are deliverable-driven and the students are held accountable for regular technical progress through weekly updates with their faculty advisor and mid-term design reviews. We have found that client-sponsored projects offer students an enriched engineering design experience as it ensures consideration of constraints and standards requirements similar to those that they will encounter as working engineers. Further, client-sponsored projects provide teams with an opportunity for regular customer interactions which help shape the product design. The process that we follow in both soliciting and helping to scope appropriate industry-related design projects will be described. In addition, an outline of the capstone course structure as well as methods used to hold teams accountable for technical milestones will be discussed. Illustrative examples of past projects will be provided.

State administration and financing of family planning services.

PubMed

Weinberg, D

1972-04-01

A 1971 survey by the Center for Family Planning Program Development consisted of a questionnaire mailed to health and welfare directors in 50 states and 5 federal jurisdictions concerning their family planning policies and administrative practices. 52 agencies responded; Guam, Mississippi, and Louisiana did not. The major funding for state health agencies was allocated by HEW and by maternal and child health (MCH) formula grants under Title 5 of the Social Security Act. 11 states made additional expenditures of $1.7 million for a variety of purposes. 21 states required local welfare departments to purchase services under the Medicaid program established by Title 19 of the Social Security Act. Administration was assigned to specific organizations within the state health agencies. 31 states reported a total of 128 full-time professional personnel, with 90 assigned at state headquarters level. In general, on a state-by-state basis, the full-time staff does not correspond to the size of the appropriations. Survey findings were useful measures of resource commitments to family planning services by state health and welfare agencies and provided data on future levels of resource requirements.

Comprehensive School Reform: Meta-Analytic Evidence of Black-White Achievement Gap Narrowing.

PubMed

Gorey, Kevin M

2009-12-30

This meta-analysis extends a previous review of the achievement effects of comprehensive school reform (CSR) programs (Borman, Hewes, Overman, & Brown, 2003). That meta-analysis observed significant effects of well endowed and well-researched programs, but it did not account for race/ethnicity. This article synthesizes 34 cohort or quasi-experimental outcomes of studies that incorporated the policy-critical characteristic of race/ethnicity. compared with matched traditional schools, the black-white achievement gap narrowed significantly more among students in CSR schools. In addition, the aggregate effects were large, substantially to completely eliminating the achievement gap between African American and non-Hispanic white students in elementary and middle schools. Title I policies before or after the No Child Left Behind Act of 2001 seem to have had essentially no impact on the black-white achievement gap. Curricular and testing mandates along with the threat of sanctions without concomitant resource supports seem to have failed. This study suggests that educational achievement inequities need not be America's destiny. It seems that they could be eliminated through concerted political will and ample resource commitments to evidence-based educational programs.

Identifying and addressing potential conflict of interest: a professional medical organization's code of ethics.

PubMed

Heim, Lori

2010-01-01

The new Consumer Alliance agreement between the American Academy of Family Physicians (AAFP) and The Coca-Cola Company provides a valuable opportunity to illustrate AAFP's adherence to its ethical foundation, demonstrate the AAFP's commitment to serving physicians and the public, and maintain the trust Americans put in their family physicians and the organization that represents them. Throughout the development of this program, as well as in all business interactions, the AAFP consistently addresses possible conflict of interest openly and directly, sharing with our members and the public exactly what measures we take to ensure that, in fact, no unethical conduct or breach of trust would--or will in the future--occur. In this case, the AAFP saw a public health and education need that was both unmet and undermined by the barrage of marketing messages and confusing information, and acted to fill that need. In so doing, the AAFP hewed to its high ethical standards, its core values, and its mission in the decisions made and the actions that followed.

KSC-2014-3150

NASA Image and Video Library

2014-07-08

CAPE CANAVERAL, Fla. -- In the KSC Training Auditorium at NASA's Kennedy Space Center in Florida, Dr. Mary Frances Berry, on stage, addresses the audience gathered for a special event marking the 50th anniversary of the Civil Rights Act of 1964, supported by a sign-language interpreter. Berry served as the assistant secretary for education in the U.S. Department of Health, Education and Welfare HEW between 1977 and 1980. From 1980 to 2004, she was a member of the U.S. Commission on Civil Rights, serving as chair from 1993 to 2004. Among Berry's many honors are the NAACP's Roy Wilkins Award, the Rosa Parks Award of the Southern Christian Leadership Conference, and the Ebony Magazine Black Achievement Award. She is one of 75 women featured in the book "I Dream a World: Portraits of Black Women Who Changed America." Sienna College Research Institute and the Women's Hall of Fame also designated her one of "America's Women of the Century." The event was presented by Kennedy's Office of Diversity and Equal Opportunity. For more information about Kennedy Space Center, visit http://www.nasa.gov/kennedy. Photo credit: NASA/Kim Shiflett

Beyond the depleting model of parenting: narratives of childrearing and change.

PubMed

Silva, Jennifer M; Pugh, Allison J

2010-01-01

A great deal of scholarship investigates the effects of parenting on adults who parent. While existing literature has identified the ways in which parenting affects parents adversely, we argue that more attention needs to be paid to how having children may enhance parents’ lives. Thus, we draw upon twenty-four in-depth interviews with young parents in order to investigate this process. First, we identify five ways in which parents say caregiving has changed their worldviews, relationships, and expectations, leading them to 1) erect barriers, 2) aspire for more, 3) view parenthood as a second chance, 4) hew a new path, and 5) make connections. Second, we uncover two central metaphors that parents rely on to explain the effect that having responsibility for children has had on their lives: the child as witness and the child as tether. We also point to future areas of investigation, arguing that only with an adequate understanding of what parenting does to parents can we understand what changing trends in families and inequality hold for ourselves and our futures.

INFINITY construction contract signed

NASA Image and Video Library

2010-04-06

Key state and community leaders celebrated April 6 with the signing of a construction contract for the state-of-the-art INFINITY Science Center planned near John C. Stennis Space Center in south Mississippi. Gulfport Mayor George Schloegel (l to r), chair of non-profit INFINITY Science Center Inc., was joined for the signing ceremony at the Hancock Bank in Gulfport by Virginia Wagner, sister of late Hancock Bank President Leo Seal Jr.; and Roy Anderson III, president and CEO of Roy Anderson Corp. Seal was the first chair of INFINITY Science Center Inc., which has led in development of the project. Roy Anderson Corp. plans to begin construction on the 72,000-square-foot, $28 million science and education center in May. The Mississippi Department of Transportation (MDOT) also is set to begin construction of a $2 million access road to the new center. The April 6 ceremony was attended by numerous officials, including former Stennis Space Center Directors Jerry Hlass and Roy Estess; Mississippi Senate President Pro Tempore Billy Hewes, R-Gulfport; Mississippi Rep. Diane Peranich, D-Pass Christian; and MDOT Southern District Commissioner Wayne Brown.

INFINITY construction contract signed

NASA Technical Reports Server (NTRS)

2010-01-01

Key state and community leaders celebrated April 6 with the signing of a construction contract for the state-of-the-art INFINITY Science Center planned near John C. Stennis Space Center in south Mississippi. Gulfport Mayor George Schloegel (l to r), chair of non-profit INFINITY Science Center Inc., was joined for the signing ceremony at the Hancock Bank in Gulfport by Virginia Wagner, sister of late Hancock Bank President Leo Seal Jr.; and Roy Anderson III, president and CEO of Roy Anderson Corp. Seal was the first chair of INFINITY Science Center Inc., which has led in development of the project. Roy Anderson Corp. plans to begin construction on the 72,000-square-foot, $28 million science and education center in May. The Mississippi Department of Transportation (MDOT) also is set to begin construction of a $2 million access road to the new center. The April 6 ceremony was attended by numerous officials, including former Stennis Space Center Directors Jerry Hlass and Roy Estess; Mississippi Senate President Pro Tempore Billy Hewes, R-Gulfport; Mississippi Rep. Diane Peranich, D-Pass Christian; and MDOT Southern District Commissioner Wayne Brown.

Slumped glass optics with interfacing ribs for high angular resolution x-ray astronomy: a progress report

NASA Astrophysics Data System (ADS)

Civitani, M.; Basso, S.; Brizzolari, C.; Ghigo, M.; Pareschi, G.; Salmaso, B.; Spiga, D.; Vecchi, G.; Breunig, E.; Burwitz, V.; Hartner, G. D.; Menz, B.

2015-09-01

The Slumped Glass Optics technology, developed at INAF/OAB since a few years, is becoming a competitive solution for the realization of the future X-ray telescopes with a very large collecting area, as e.g. the proposed Athena, with more than 2 m2 effective area at 1 keV and with a high angular resolution (5'' HEW). The developed technique is based on modular elements, named X-ray Optical Units (XOUs), made of several layers of thin foils of glass, previously formed by direct hot slumping in cylindrical configuration, and then stacked in a Wolter-I configuration, through interfacing ribs. The achievable global angular resolution of the optics relies on the surface shape accuracy of the slumped foils, on the smoothness of the mirror surfaces and on the correct integration and co-alignment of the mirror segments achieved with a dedicated Integration Machine (IMA). In this paper we provide an update of the project development, reporting on the last results achieved. In particular, we will present the results obtained with full illumination X-ray tests for the last developed prototypes.

Identifying and Addressing Potential Conflict of Interest: A Professional Medical Organization’s Code of Ethics

PubMed Central

Heim, Lori

2010-01-01

The new Consumer Alliance agreement between the American Academy of Family Physicians (AAFP) and The Coca-Cola Company provides a valuable opportunity to illustrate AAFP’s adherence to its ethical foundation, demonstrate the AAFP’s commitment to serving physicians and the public, and maintain the trust Americans put in their family physicians and the organization that represents them. Throughout the development of this program, as well as in all business interactions, the AAFP consistently addresses possible conflict of interest openly and directly, sharing with our members and the public exactly what measures we take to ensure that, in fact, no unethical conduct or breach of trust would—or will in the future—occur. In this case, the AAFP saw a public health and education need that was both unmet and undermined by the barrage of marketing messages and confusing information, and acted to fill that need. In so doing, the AAFP hewed to its high ethical standards, its core values, and its mission in the decisions made and the actions that followed. PMID:20644192

KSC-2014-3148

NASA Image and Video Library

2014-07-08

CAPE CANAVERAL, Fla. -- In the KSC Training Auditorium at NASA's Kennedy Space Center in Florida, Dr. Mary Frances Berry relates her personal experiences in the fight for civil liberties to employees gathered for a special event marking the 50th anniversary of the Civil Rights Act of 1964. Berry served as the assistant secretary for education in the U.S. Department of Health, Education and Welfare HEW between 1977 and 1980. From 1980 to 2004, she was a member of the U.S. Commission on Civil Rights, serving as chair from 1993 to 2004. Among Berry's many honors are the NAACP's Roy Wilkins Award, the Rosa Parks Award of the Southern Christian Leadership Conference, and the Ebony Magazine Black Achievement Award. She is one of 75 women featured in the book "I Dream a World: Portraits of Black Women Who Changed America." Sienna College Research Institute and the Women's Hall of Fame also designated her one of "America's Women of the Century." The event was presented by Kennedy's Office of Diversity and Equal Opportunity. For more information about Kennedy Space Center, visit http://www.nasa.gov/kennedy. Photo credit: NASA/Kim Shiflett

KSC-2014-3149

NASA Image and Video Library

2014-07-08

CAPE CANAVERAL, Fla. -- In the KSC Training Auditorium at NASA's Kennedy Space Center in Florida, Dr. Mary Frances Berry relates her personal experiences in the fight for civil liberties to employees gathered for a special event marking the 50th anniversary of the Civil Rights Act of 1964. Berry served as the assistant secretary for education in the U.S. Department of Health, Education and Welfare HEW between 1977 and 1980. From 1980 to 2004, she was a member of the U.S. Commission on Civil Rights, serving as chair from 1993 to 2004. Among Berry's many honors are the NAACP's Roy Wilkins Award, the Rosa Parks Award of the Southern Christian Leadership Conference, and the Ebony Magazine Black Achievement Award. She is one of 75 women featured in the book "I Dream a World: Portraits of Black Women Who Changed America." Sienna College Research Institute and the Women's Hall of Fame also designated her one of "America's Women of the Century." The event was presented by Kennedy's Office of Diversity and Equal Opportunity. For more information about Kennedy Space Center, visit http://www.nasa.gov/kennedy. Photo credit: NASA/Kim Shiflett

NASA Systems Engineering Handbook

NASA Technical Reports Server (NTRS)

Shishko, Robert; Aster, Robert; Chamberlain, Robert G.; Mcduffee, Patrick; Pieniazek, Les; Rowell, Tom; Bain, Beth; Cox, Renee I.; Mooz, Harold; Polaski, Lou

1995-01-01

This handbook brings the fundamental concepts and techniques of systems engineering to NASA personnel in a way that recognizes the nature of NASA systems and environment. It is intended to accompany formal NASA training courses on systems engineering and project management when appropriate, and is designed to be a top-level overview. The concepts were drawn from NASA field center handbooks, NMI's/NHB's, the work of the NASA-wide Systems Engineering Working Group and the Systems Engineering Process Improvement Task team, several non-NASA textbooks and guides, and material from independent systems engineering courses taught to NASA personnel. Five core chapters cover systems engineering fundamentals, the NASA Project Cycle, management issues in systems engineering, systems analysis and modeling, and specialty engineering integration. It is not intended as a directive. Superseded by: NASA/SP-2007-6105 Rev 1 (20080008301).

Building inclusive engineering identities: implications for changing engineering culture

NASA Astrophysics Data System (ADS)

Atadero, Rebecca A.; Paguyo, Christina H.; Rambo-Hernandez, Karen E.; Henderson, Heather L.

2018-05-01

Ongoing efforts to broaden the participation of women and people of colour in engineering degree programmes and careers have had limited success. This paper describes a different approach to broadening participation that seeks to work with all students and develop inclusive engineering identities. Researchers worked with the instructors of two first-year engineering courses to integrate curriculum activities designed to promote the formation of engineering identities and build an appreciation for how diversity and inclusion strengthen engineering practice. Multilevel modelling results indicated positive effects of the intervention on appreciation for diversity but no effects on engineering identity, and qualitative results indicated students learned the most about diversity not through one of the intervention activities, but through team projects in the courses. We also describe lessons learned in how to teach engineering students about diversity in ways that are relevant to engineering.

Affordable Rankine Cycle Waste Heat Recovery for Heavy Duty Trucks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Subramanian, Swami Nathan

Nearly 30% of fuel energy is not utilized and wasted in the engine exhaust. Organic Rankine Cycle (ORC) based waste heat recovery (WHR) systems offer a promising approach on waste energy recovery and improving the efficiency of Heavy-Duty diesel engines. Major barriers in the ORC WHR system are the system cost and controversial waste heat recovery working fluids. More than 40% of the system cost is from the additional heat exchangers (recuperator, condenser and tail pipe boiler). The secondary working fluid loop designed in ORC system is either flammable or environmentally sensitive. The Eaton team investigated a novel approach tomore » reduce the cost of implementing ORC based WHR systems to Heavy-Duty (HD) Diesel engines while utilizing safest working fluids. Affordable Rankine Cycle (ARC) concept aimed to define the next generation of waste energy recuperation with a cost optimized WHR system. ARC project used engine coolant as the working fluid. This approach reduced the need for a secondary working fluid circuit and subsequent complexity. A portion of the liquid phase engine coolant has been pressurized through a set of working fluid pumps and used to recover waste heat from the exhaust gas recirculation (EGR) and exhaust tail pipe exhaust energy. While absorbing heat, the mixture is partially vaporized but remains a wet binary mixture. The pressurized mixed-phase engine coolant mixture is then expanded through a fixed-volume ratio expander that is compatible with two-phase conditions. Heat rejection is accomplished through the engine radiator, avoiding the need for a separate condenser. The ARC system has been investigated for PACCAR’s MX-13 HD diesel engine.« less

75 FR 52807 - Aviation Rulemaking Advisory Committee; Transport Airplane and Engine Issues-New Task

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-27

...'s Transport Airplane and Engine Issues and has established a new Materials Flammability Working... International Aircraft Materials Fire Test Working Group. The working group is sponsored by the FAA's William J... implementation. FAA will provide ARAC with the proposed approach. The ARAC working group is expected to produce a...

Dialogue on sustainable development as part of engineering education: the relevance of the Finnish case : commentary on "a national collaboration process: Finnish engineering education for the benefit of people and environment".

PubMed

Geerts, Robert

2013-12-01

Society invests in the education of engineers because it is expected that the works of engineers will bring good results for society. Because the work of engineers is not value free or neutral, it is important that engineers are educated in the important principles of the social sciences and humanities. This education is essential for the awareness and understanding of what is good for society. Therefore the concept of sustainable development should be part of an education in engineering but only when the social sciences are also a part of it.

19. Engine identified as a single cylinder vacuum assist engine ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

19. Engine identified as a single cylinder vacuum assist engine for the Filer and Stowell 15-inch continuous mill. - Carnegie Steel-Ohio Works, Steam Engines, 912 Salt Springs Road, Youngstown, Mahoning County, OH

Tissue engineering in urethral reconstruction—an update

PubMed Central

Mangera, Altaf; Chapple, Christopher R

2013-01-01

The field of tissue engineering is rapidly progressing. Much work has gone into developing a tissue engineered urethral graft. Current grafts, when long, can create initial donor site morbidity. In this article, we evaluate the progress made in finding a tissue engineered substitute for the human urethra. Researchers have investigated cell-free and cell-seeded grafts. We discuss different approaches to developing these grafts and review their reported successes in human studies. With further work, tissue engineered grafts may facilitate the management of lengthy urethral strictures requiring oral mucosa substitution urethroplasty. PMID:23042444

Ethics and Engineering. Working Papers Series Volume 2.

ERIC Educational Resources Information Center

Cutcliffe, Stephen H., Ed.

This collection of essays is the second volume in a series of working papers from Lehigh University Technology Studies Resource Center. The papers focus on the ethical implications of engineering as a profession and the current problems associated with the public responsibility of engineers. Issues that relate to the ethical dimensions of…

33 CFR 211.74 - Public notice of the availability of land for sale.

Code of Federal Regulations, 2010 CFR

2010-07-01

... conditions, reservations and restrictions as the Chief of Engineers or the Director of Civil Works (Assistant to the Chief of Engineers for Civil Works) may determine to be necessary for the management and... of land for sale. 211.74 Section 211.74 Navigation and Navigable Waters CORPS OF ENGINEERS...

Electrical Engineers' Perceptions on Education--Electromagnetic Field Theory and Its Connection to Working Life

ERIC Educational Resources Information Center

Keltikangas, K.; Wallen, H.

2010-01-01

This paper investigates electrical engineers' perceptions on their education in Finland, with particular emphasis on the basic electromagnetic field theory courses and their applicability in working life, using two online surveys (n = 99 and n = 120). The answers show a reasonably good satisfaction with the electrical engineering studies in…

Principles of liquids working in heat engines

PubMed Central

Allen, P. C.; Knight, W. R.; Paulson, D. N.; Wheatley, J. C.

1980-01-01

The thermodynamic and thermophysical properties of liquids suggest that they should be powerful working fluids in heat engines. Their use requires heat engines based conceptually on the Stirling and Malone principles. The principles are explained, and then experiments on propylene are presented that demonstrate the principles and confirm the thermodynamic analysis. PMID:16592756

Parametric scramjet analysis

NASA Astrophysics Data System (ADS)

Choi, Jongseong

The performance of a hypersonic flight vehicle will depend on existing materials and fuels; this work presents the performance of the ideal scramjet engine for three different combustion chamber materials and three different candidate fuels. Engine performance is explored by parametric cycle analysis for the ideal scramjet as a function of material maximum service temperature and the lower heating value of jet engine fuels. The thermodynamic analysis is based on the Brayton cycle as similarly employed in describing the performance of the ramjet, turbojet, and fanjet ideal engines. The objective of this work is to explore material operating temperatures and fuel possibilities for the combustion chamber of a scramjet propulsion system to show how they relate to scramjet performance and the seven scramjet engine parameters: specific thrust, fuel-to-air ratio, thrust-specific fuel consumption, thermal efficiency, propulsive efficiency, overall efficiency, and thrust flux. The information presented in this work has not been done by others in the scientific literature. This work yields simple algebraic equations for scramjet performance which are similar to that of the ideal ramjet, ideal turbojet and ideal turbofan engines.

Globalization and Organizational Change: Engineers' Experiences and Their Implications for Engineering Education

ERIC Educational Resources Information Center

Lucena, Juan C.

2006-01-01

The demand for flexible engineers presents significant challenges to engineering education. Among these is the need for engineers to be prepared to understand and deal with organizational change. Yet engineering education and research on engineers have overlooked the impact of organizational change on engineering work. After outlining the impact…

Army Corps of Engineers: Better Guidance Could Improve Corps’ Information on Water Resources Projects Undertaken by Nonfederal Sponsors

DTIC Science & Technology

2016-12-01

Nonfederal Sponsors Why GAO Did This Study Through its Civil Works program, the Corps designs , constructs, and maintains federal water resources...Public Works United States Senate Dear Mr. Chairman: The U.S. Army Corps of Engineers (Corps) is the world’s largest public engineering, design ...its Civil Works Program, in general, the Corps plans, designs , constructs, operates, and maintains a wide range of water resources projects. Congress

Exergy analysis of electrically- and thermally-driven engines to drive heat pumps: An exhaustive comparative study

DOE PAGES

Ally, Moonis R.; Sharma, Vishaldeep; Abdelaziz, Omar

2017-02-21

The choice of driving a heat pump with an electrically$-$or a thermally-driven engine is a vexing question complicated by the carbon footprint and environmental impact of using electricity versus natural gas (or waste heat) as the main driver for the respective engines. The amount of useful work generated by these two distinct engines is the focal point of this paper, which addresses a key question: which engine presents a better choice for a given heat pumping application within the constraints of energy and environmental stewardship? Extensive use of energy, exergy, and availability analysis is necessary to quantify the useful workmore » and to examine the issue holistically for both types of engines. The methodology explains why the output of work from these two distinct engines to satisfy a given load is vastly different, a direct consequence of their inherent Irreversibility. Thermodynamic consistency is guaranteed by satisfaction of the First and Second Laws applied to closed systems and their subsystems. The general conclusion is that thermally-driven engines are not industrious converters of heat to mechanical work.« less

Exergy analysis of electrically- and thermally-driven engines to drive heat pumps: An exhaustive comparative study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ally, Moonis R.; Sharma, Vishaldeep; Abdelaziz, Omar

The choice of driving a heat pump with an electrically$-$or a thermally-driven engine is a vexing question complicated by the carbon footprint and environmental impact of using electricity versus natural gas (or waste heat) as the main driver for the respective engines. The amount of useful work generated by these two distinct engines is the focal point of this paper, which addresses a key question: which engine presents a better choice for a given heat pumping application within the constraints of energy and environmental stewardship? Extensive use of energy, exergy, and availability analysis is necessary to quantify the useful workmore » and to examine the issue holistically for both types of engines. The methodology explains why the output of work from these two distinct engines to satisfy a given load is vastly different, a direct consequence of their inherent Irreversibility. Thermodynamic consistency is guaranteed by satisfaction of the First and Second Laws applied to closed systems and their subsystems. The general conclusion is that thermally-driven engines are not industrious converters of heat to mechanical work.« less

Laser engines operating by resonance absorption.

PubMed

Garbuny, M; Pechersky, M J

1976-05-01

The coherence properties and power levels of lasers available at present lend themselves to the remote operation of mechanical engines by resonance absorption in a working gas. Laser radiation is capable of producing extremely high temperatures in a gas. Limits to the achievable temperatures in the working gas of an engine are imposed by the solid walls and by loss of resonance absorption due to thermal saturation, bleaching, and dissociation. However, it is shown that by proper control of the laser beam in space, time, and frequency, as well as by choice of the absorbing gas, these limits are to a great extent removed so that very high temperatures are indeed attainable. The working gas is largely monatomic, preferably helium with the addition of a few volume percent of an absorber. Such a gas mixture, internally heated, permits an optimization of the expansion ratio, with resulting thermal efficiencies and work ratios, not achievable in conventional engines. A relationship between thermal efficiency and work ratio is derived that is quite general for the optimization condition. The performance of laser piston engines, turbines, and the Stirling cycle based on these principles is discussed and compared with conventional engine operation. Finally, a brief discussion is devoted to the possibility and concepts for the direct conversion of selective vibrational or electronic excitation into mechanical work, bypassing the translational degrees of freedom.

Predictors of Work-Family Role Conflict and Its Impact on Professional Women in Medicine, Engineering, and Information Technology in Nigeria.

PubMed

Uzoigwe, Anthonia Ginika; Low, Wah Yun; Noor, Siti Nurani Mohd

2016-10-01

This study examines work-family role conflict and the factors predicting it, with a sample of 173 professional women in engineering and information technology (IT) firms, including 2 hospitals-1 public and 1 private. Our findings show no significant difference in the level of work-family role conflict encountered by women across medicine, engineering, and IT, whereas hours of work, family responsibilities, job demand, and work role overload were significantly correlated with work-family role conflict. Multiple linear regression analysis indicates that only work role overload, family responsibilities, and hours of work significantly predicted 45.9% of work-family role conflict. This implies that working women are burdened by work demands, which invariably affects the work-family role conflict they experience and leads to deterioration of their occupational health. It is suggested that employers should create a flexible work schedule and establish family-friendly policies in the workplace to promote a healthy work-life balance for women in science careers.

Optimization of thermoacoustic engine driven thermoacoustic refrigerator using response surface methodology

NASA Astrophysics Data System (ADS)

Desai, A. B.; Desai, K. P.; Naik, H. B.; Atrey, M. D.

2017-02-01

Thermoacoustic engines (TAEs) are devices which convert heat energy into useful acoustic work whereas thermoacoustic refrigerators (TARs) convert acoustic work into temperature gradient. These devices work without any moving component. Study presented here comprises of a combination system i.e. thermoacoustic engine driven thermoacoustic refrigerator (TADTAR). This system has no moving component and hence it is easy to fabricate but at the same time it is very challenging to design and construct optimized system with comparable performance. The work presented here aims to apply optimization technique to TADTAR in the form of response surface methodology (RSM). Significance of stack position and stack length for engine stack, stack position and stack length for refrigerator stack are investigated in current work. Results from RSM are compared with results from simulations using Design Environment for Low-amplitude Thermoacoustic Energy conversion (DeltaEC) for compliance.

Effective work function engineering for a TiN/XO(X = La, Zr, Al)/SiO{sub 2} stack structures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Dongjin, E-mail: dongjin0710.lee@samsung.com; Lee, Jieun; Jung, Kyoungho

In this study, we demonstrated that work function engineering is possible over a wide range (+200 mV to −430 mV) in a TiN/XO (X = La, Zr, or Al)/SiO{sub 2} stack structures. From ab initio simulations, we selected the optimal material for the work function engineering. The work function engineering mechanism was described by metal diffusion into the TiN film and silicate formation in the TiN/SiO{sub 2} interface. The metal doping and the silicate formation were confirmed by transmission electron microscopy and energy dispersive spectroscopy line profiling, respectively. In addition, the amount of doped metal in the TiN film depended on the thickness ofmore » the insertion layer XO. From the work function engineering technique, which can control a variety of threshold voltages (Vth), an improvement in transistors with different V{sub th} values in the TiN/XO/SiO{sub 2} stack structures is expected.« less

M.U.S.T. 2007 Summer Research Project at NASA's KSC MILA Facility

NASA Technical Reports Server (NTRS)

PintoRey, Christian R.

2007-01-01

The summer research activity at Kennedy Space Center (KSC) aims to introduce the student to the basic principles in their field of study. While at KSC, a specific research project awaits the student to complete. As an Aeronautical Engineering student, my assigned project is to assist the cognizant engineer, Mr. Troy Hamilton, in the six engineering phases for replacing the Ponce De Leon (PDL)4.3M Antenna Control Unit (ACU). Although the project mainly requires the attention of two engineers and two students, it also involves the participation of many colleagues at various points during the course of the engineering change (EC). Since the PDL 4.3M ACU engineering change makes both hardware and software changes, it calls upon the expertise of a Hardware Engineer as well as a Software Engineer. As students, Mr. Jeremy Bresette and I have worked side by side with the engineers, gaining invaluable experience. We work in two teams, the hardware team and the software team, On certain tasks, we assist the engineers, while on others we assume their roles. By diligently working in this fashion, we are learning how to communicate effectively as professionals, despite the fact that we are studying different engineering fields. This project has been a great fit for my field of study, as it has highly improved my awareness of the many critical tasks involved in carrying out an engineering project.

Integration of safety engineering into a cost optimized development program.

NASA Technical Reports Server (NTRS)

Ball, L. W.

1972-01-01

A six-segment management model is presented, each segment of which represents a major area in a new product development program. The first segment of the model covers integration of specialist engineers into 'systems requirement definition' or the system engineering documentation process. The second covers preparation of five basic types of 'development program plans.' The third segment covers integration of system requirements, scheduling, and funding of specialist engineering activities into 'work breakdown structures,' 'cost accounts,' and 'work packages.' The fourth covers 'requirement communication' by line organizations. The fifth covers 'performance measurement' based on work package data. The sixth covers 'baseline requirements achievement tracking.'

Theoretical modeling of the subject: Western and Eastern types of human reflexion.

PubMed

Lefebvre, Vladimir A

2017-12-01

The author puts forth the hypothesis that mental phenomena are connected with thermodynamic properties of large neural network. A model of the subject with reflexion and capable for meditation is constructed. The processes of reflexion and meditation are presented as the sequence of heat engines. Each subsequent engine compensates for the imperfectness of the preceding engine by performing work equal to the lost available work of the preceding one. The sequence of heat engines is regarded as a chain of the subject's mental images of the self. Each engine can be interpreted as an image of the self that the engine next to it has, and the work performed by engines as the emotions that the subject and his images are experiencing. Two types of meditation are analyzed: The dissolution in nothingness and union with the Absolute. In the first type, the initial engine is the one that yields heat to the coldest reservoir, and in the second type, the initial engine is the one that takes heat from the hottest reservoir. The main concepts of thermodynamics are reviewed in relation to the process of human reflexion. Copyright © 2017 Elsevier Ltd. All rights reserved.

2. EXTERIOR OF ENGINE ROOM, CONTAINING MESTACORLISS CROSSCOMPOUND ENGINE, FOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. EXTERIOR OF ENGINE ROOM, CONTAINING MESTA-CORLISS CROSS-COMPOUND ENGINE, FOR 40" BLOOMING MILL - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

1. EXTERIOR OF ENGINE ROOM, CONTAINING UNITEDTOD TWINTANDEM ENGINE, FOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. EXTERIOR OF ENGINE ROOM, CONTAINING UNITED-TOD TWIN-TANDEM ENGINE, FOR 40" BLOOMING MILL - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

[Development of a medical equipment support information system based on PDF portable document].

PubMed

Cheng, Jiangbo; Wang, Weidong

2010-07-01

According to the organizational structure and management system of the hospital medical engineering support, integrate medical engineering support workflow to ensure the medical engineering data effectively, accurately and comprehensively collected and kept in electronic archives. Analyse workflow of the medical, equipment support work and record all work processes by the portable electronic document. Using XML middleware technology and SQL Server database, complete process management, data calculation, submission, storage and other functions. The practical application shows that the medical equipment support information system optimizes the existing work process, standardized and digital, automatic and efficient orderly and controllable. The medical equipment support information system based on portable electronic document can effectively optimize and improve hospital medical engineering support work, improve performance, reduce costs, and provide full and accurate digital data

Software Engineering Improvement Plan

NASA Technical Reports Server (NTRS)

2006-01-01

In performance of this task order, bd Systems personnel provided support to the Flight Software Branch and the Software Working Group through multiple tasks related to software engineering improvement and to activities of the independent Technical Authority (iTA) Discipline Technical Warrant Holder (DTWH) for software engineering. To ensure that the products, comments, and recommendations complied with customer requirements and the statement of work, bd Systems personnel maintained close coordination with the customer. These personnel performed work in areas such as update of agency requirements and directives database, software effort estimation, software problem reports, a web-based process asset library, miscellaneous documentation review, software system requirements, issue tracking software survey, systems engineering NPR, and project-related reviews. This report contains a summary of the work performed and the accomplishments in each of these areas.

Role of measurement in feedback-controlled quantum engines

NASA Astrophysics Data System (ADS)

Yi, Juyeon; Kim, Yong Woon

2018-01-01

In feedback controls, measurement is an essential step in designing protocols according to outcomes. For quantum mechanical systems, measurement has another effect; to supply energy to the measured system. We verify that in feedback-controlled quantum engines, measurement plays a dual role; not only as an auxiliary to perform feedback control but also as an energy supply to drive the engines. We consider a specific engine cycle exploiting feedback control followed by projective measurement and show that the maximum bound of the extractable work is set by both the efficacy of the feedback control and the energy change caused by projective measurement. We take a concrete example of an engine using an immobile spin-1/2 particle as a working substance and suggest two possible scenarios for work extraction.

Faculty Perspectives on the Inclusion of Work-Related Learning in Engineering Curricula

ERIC Educational Resources Information Center

Magnell, Marie; Geschwind, Lars; Kolmos, Anette

2017-01-01

The purpose of this paper is to identify faculty perspectives on the integration of work-related issues in engineering education. A mixed methods approach was used to explore faculty attitudes towards work-related learning, to describe activities related to working life that have been introduced into the curriculum and to identify factors that…

Preliminary results from a four-working space, double-acting piston, Stirling engine controls model

NASA Technical Reports Server (NTRS)

Daniele, C. J.; Lorenzo, C. F.

1980-01-01

A four working space, double acting piston, Stirling engine simulation is being developed for controls studies. The development method is to construct two simulations, one for detailed fluid behavior, and a second model with simple fluid behaviour but containing the four working space aspects and engine inertias, validate these models separately, then upgrade the four working space model by incorporating the detailed fluid behaviour model for all four working spaces. The single working space (SWS) model contains the detailed fluid dynamics. It has seven control volumes in which continuity, energy, and pressure loss effects are simulated. Comparison of the SWS model with experimental data shows reasonable agreement in net power versus speed characteristics for various mean pressure levels in the working space. The four working space (FWS) model was built to observe the behaviour of the whole engine. The drive dynamics and vehicle inertia effects are simulated. To reduce calculation time, only three volumes are used in each working space and the gas temperature are fixed (no energy equation). Comparison of the FWS model predicted power with experimental data shows reasonable agreement. Since all four working spaces are simulated, the unique capabilities of the model are exercised to look at working fluid supply transients, short circuit transients, and piston ring leakage effects.

Development of a Dedicated Speech Work Station.

DTIC Science & Technology

1984-12-01

AD-Ai55 465 DEVELOPMENT OF R DEDICATED SPEECH WORK STTION(U) AIR / FORCE INST OF TECH WRIGHT-PATTERSON AFB OH SCHOOL OF ENGINEERING W H LIEBER DEC 84...Presented to the Faculty of the School of Engineering of the Air Force Institute of Technology Air University in Partial Fulfillment of the Requirement for...the Degree of Master of Science in Electrical Engineering by William H. Lieber, B.S.E.E. Capt USAF Graduate Electrical Engineering December 1984

Problem Decomposition and Recomposition in Engineering Design: A Comparison of Design Behavior between Professional Engineers, Engineering Seniors, and Engineering Freshmen

ERIC Educational Resources Information Center

Song, Ting; Becker, Kurt; Gero, John; DeBerard, Scott; DeBerard, Oenardi; Reeve, Edward

2016-01-01

The authors investigated the differences in using problem decomposition and problem recomposition between dyads of engineering experts, engineering seniors, and engineering freshmen. Participants worked in dyads to complete an engineering design challenge within 1 hour. The entire design process was video and audio recorded. After the design…

Faculty perspectives on the inclusion of work-related learning in engineering curricula

NASA Astrophysics Data System (ADS)

Magnell, Marie; Geschwind, Lars; Kolmos, Anette

2017-11-01

The purpose of this paper is to identify faculty perspectives on the integration of work-related issues in engineering education. A mixed methods approach was used to explore faculty attitudes towards work-related learning, to describe activities related to working life that have been introduced into the curriculum and to identify factors that faculty see as important if the amount of work-related learning is to increase. The results show that faculty members are positive about integrating work-related issues into the curriculum. Programmes with more extensive connections to industry offer more integrated activities, such as projects with external actors, and use professional contacts established through research in their teaching. In order to increase work-related learning in engineering curricula, faculty request clear goals and pedagogical tools. Other options to increase work-related learning include offering faculty the opportunity to work outside academia.

A Working Plan for Treating the Engineering Faculty Shortage Problem.

ERIC Educational Resources Information Center

Shoup, Terry E., Ed.

In view of the consequences of the engineering faculty shortage problem on engineering capabilities in the future in the United States, a working plan which will serve as a national agenda for prompt action has been developed. This plan involves the three key groups (federal government, academic community, industry) who have the vision,…

Are Quantity Surveyors Competent to Value for Civil Engineering Works? Evaluating QSs' Competencies and Militating Factors

ERIC Educational Resources Information Center

Olawumi, Timothy Oluwatosin; Ayegun, Olaleke Amos

2016-01-01

The role of the quantity surveyor is one that is often unclear amongst the general public. This study discussed the competencies of the quantity surveyor in measuring and managing civil engineering works and also carrying out the financial management for civil engineering construction projects; also outlined the various competencies and skills…

36 CFR Appendix A to Part 14 - Appendix A to Part 14

Code of Federal Regulations, 2010 CFR

2010-07-01

.... Forms 1 and 2 to be placed on maps. See § 14.25(a)(7). Engineer's Statement (Form 1) _____(Name of... survey of the _____(Kind of works) as described and shown on this map; that the survey of said works made... this map. Engineer Applicant's Certificate (Form 2) This is to certify that _____ (Engineer), who...

Demographic Trends and the Scientific and Engineering Work Force. A Technical Memorandum.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Office of Technology Assessment.

The Federal Government has acknowledged its key role in educating and assuring an adequate supply of scientists and engineers since World War II. Although scientists and engineers represent only three percent of the national work force, they are considered by many to be a crucial element in the nation's efforts to improve its economic…

Integrating Rehabilitation Engineering Technology With Biologics

PubMed Central

Collinger, Jennifer L.; Dicianno, Brad E.; Weber, Douglas J.; Cui, Xinyan Tracy; Wang, Wei; Brienza, David M.; Boninger, Michael L.

2017-01-01

Rehabilitation engineers apply engineering principles to improve function or to solve challenges faced by persons with disabilities. It is critical to integrate the knowledge of biologics into the process of rehabilitation engineering to advance the field and maximize potential benefits to patients. Some applications in particular demonstrate the value of a symbiotic relationship between biologics and rehabilitation engineering. In this review we illustrate how researchers working with neural interfaces and integrated prosthetics, assistive technology, and biologics data collection are currently integrating these 2 fields. We also discuss the potential for further integration of biologics and rehabilitation engineering to deliver the best technologies and treatments to patients. Engineers and clinicians must work together to develop technologies that meet clinical needs and are accessible to the intended patient population. PMID:21703573

Influence of Thrust Level on the Architecture and Optimal Working Process Parameters of a Small-scale Turbojet for UAV

NASA Astrophysics Data System (ADS)

Kuz`michev, V. S.; Filinov, E. P.; Ostapyuk, Ya A.

2018-01-01

This article describes how the thrust level influences the turbojet architecture (types of turbomachines that provide the maximum efficiency) and its working process parameters (turbine inlet temperature (TIT) and overall pressure ratio (OPR)). Functional gasdynamic and strength constraints were included, total mass of fuel and the engine required for mission and the specific fuel consumption (SFC) were considered optimization criteria. Radial and axial turbines and compressors were considered. The results show that as the engine thrust decreases, optimal values of working process parameters decrease too, and the regions of compromise shrink. Optimal engine architecture and values of working process parameters are suggested for turbojets with thrust varying from 100N to 100kN. The results show that for the thrust below 25kN the engine scale factor should be taken into the account, as the low flow rates begin to influence the efficiency of engine elements substantially.

Students' Changing Images of Engineering and Engineers. Research Brief

ERIC Educational Resources Information Center

Jocuns, Andrew; Stevens, Reed; Garrison, Lari; Amos, Daniel

2008-01-01

This study analyzes the images of engineers and engineering that students construct over the course of their undergraduate engineering educations. Students in their first year of study to become engineers knew very little about the work they would be doing as an engineer and their expectations were more specific, hopeful, and high status than…

Personal vision: enhancing work engagement and the retention of women in the engineering profession.

PubMed

Buse, Kathleen R; Bilimoria, Diana

2014-01-01

This study examines how personal vision enhances work engagement and the retention of women in the engineering profession. Using a mixed method approach to understand the factors related to the retention of women in the engineering profession, we first interviewed women who persisted and women who opted out of the profession (Buse and Bilimoria, 2014). In these rich stories, we found that women who persisted had a personal vision that included their profession, and that this personal vision enabled them to overcome the bias, barriers and discrimination in the engineering workplace. To validate this finding on a larger population, we developed a scale to measure one's personal vision conceptualized as the ideal self (Boyatzis and Akrivou, 2006). The measure was tested in a pilot study and then used in a study of 495 women with engineering degrees. The findings validate that the ideal self is comprised of self-efficacy, hope, optimism and core identity. For these women, the ideal self directly impacts work engagement and work engagement directly impacts career commitment to engineering. The findings add to extant theory related to the role of personal vision and intentional change theory. From a practical perspective, these findings will aid efforts to retain women in engineering and other STEM professions.

Personal vision: enhancing work engagement and the retention of women in the engineering profession

PubMed Central

Buse, Kathleen R.; Bilimoria, Diana

2014-01-01

This study examines how personal vision enhances work engagement and the retention of women in the engineering profession. Using a mixed method approach to understand the factors related to the retention of women in the engineering profession, we first interviewed women who persisted and women who opted out of the profession (Buse and Bilimoria, 2014). In these rich stories, we found that women who persisted had a personal vision that included their profession, and that this personal vision enabled them to overcome the bias, barriers and discrimination in the engineering workplace. To validate this finding on a larger population, we developed a scale to measure one's personal vision conceptualized as the ideal self (Boyatzis and Akrivou, 2006). The measure was tested in a pilot study and then used in a study of 495 women with engineering degrees. The findings validate that the ideal self is comprised of self-efficacy, hope, optimism and core identity. For these women, the ideal self directly impacts work engagement and work engagement directly impacts career commitment to engineering. The findings add to extant theory related to the role of personal vision and intentional change theory. From a practical perspective, these findings will aid efforts to retain women in engineering and other STEM professions. PMID:25538652

Methods of the working processes modelling of an internal combustion engine by an ANSYS IC Engine module

NASA Astrophysics Data System (ADS)

Kurchatkin, I. V.; Gorshkalev, A. A.; Blagin, E. V.

2017-01-01

This article deals with developed methods of the working processes modelling in the combustion chamber of an internal combustion engine (ICE). Methods includes description of the preparation of a combustion chamber 3-d model, setting of the finite-element mesh, boundary condition setting and solution customization. Aircraft radial engine M-14 was selected for modelling. The cycle of cold blowdown in the ANSYS IC Engine software was carried out. The obtained data were compared to results of known calculation methods. A method of engine’s induction port improvement was suggested.

Software Engineering Improvement Activities/Plan

NASA Technical Reports Server (NTRS)

2003-01-01

bd Systems personnel accomplished the technical responsibilities for this reporting period, as planned. A close working relationship was maintained with personnel of the MSFC Avionics Department Software Group (ED14). Work accomplishments included development, evaluation, and enhancement of a software cost model, performing literature search and evaluation of software tools available for code analysis and requirements analysis, and participating in other relevant software engineering activities. Monthly reports were submitted. This support was provided to the Flight Software Group/ED 1 4 in accomplishing the software engineering improvement engineering activities of the Marshall Space Flight Center (MSFC) Software Engineering Improvement Plan.

40 CFR 1065.210 - Work input and output sensors.

Code of Federal Regulations, 2012 CFR

2012-07-01

... may decide to measure the tractive (i.e., electrical output) power of a locomotive, rather than the brake power of the locomotive engine. In these cases, divide the electrical work by accurate values of... boundary, use good engineering judgment to estimate any work-conversion losses in a way that avoids...

40 CFR 1065.210 - Work input and output sensors.

Code of Federal Regulations, 2011 CFR

2011-07-01

... may decide to measure the tractive (i.e., electrical output) power of a locomotive, rather than the brake power of the locomotive engine. In these cases, divide the electrical work by accurate values of... boundary, use good engineering judgment to estimate any work-conversion losses in a way that avoids...

Work Sampling Study of an Engineering Professor during a Regular Contract Period

ERIC Educational Resources Information Center

Brink, Jan; McDonald, Dale B.

2015-01-01

Work sampling is a technique that has been employed in industry and fields such as healthcare for some time. It is a powerful technique, and an alternative to conventional stop watch time studies, used by industrial engineers to focus upon random work sampling observations. This study applies work sampling to the duties performed by an individual…

The Roles of Engineering Notebooks in Shaping Elementary Engineering Student Discourse and Practice

ERIC Educational Resources Information Center

Hertel, Jonathan D.; Cunningham, Christine M.; Kelly, Gregory J.

2017-01-01

Engineering design challenges offer important opportunities for students to learn science and engineering knowledge and practices. This study examines how students' engineering notebooks across four units of the curriculum "Engineering is Elementary" (EiE) support student work during design challenges. Through educational ethnography and…

Role of quantum correlations in light-matter quantum heat engines

NASA Astrophysics Data System (ADS)

Barrios, G. Alvarado; Albarrán-Arriagada, F.; Cárdenas-López, F. A.; Romero, G.; Retamal, J. C.

2017-11-01

We study a quantum Otto engine embedding a working substance composed of a two-level system interacting with a harmonic mode. The physical properties of the substance are described by a generalized quantum Rabi model arising in superconducting circuit realizations. We show that light-matter quantum correlation reduction during the hot bath stage and adiabatic stages act as an indicator for enhanced work extraction and efficiency, respectively. Also, we demonstrate that the anharmonic spectrum of the working substance has a direct impact on the transition from heat engine into refrigerator as the light-matter coupling is increased. These results shed light on the search for optimal conditions in the performance of quantum heat engines.

State of the art and future needs in S.I. engine combustion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maly, R.R.

1994-12-31

The paper reviews, in short, the state-of-the-art in SI engine combustion by addressing its main features: mixture formation, ignition, homogeneous combustion, pollutant formation, knock, and engine modeling. Necessary links between fundamental and practical work are clarified and discussed along with advanced diagnostics and simulation tools. The needs for further work are identified, the most important one being integration of all fundamental and practical resources to meet R and D requirements for future engines.

Engineering works and the tidal Chesapeake

NASA Technical Reports Server (NTRS)

Hargis, W. J., Jr.

1972-01-01

The tidal tributaries of the ocean and coastal areas of the mid-Atlantic region and the ecological significance of engineering projects are discussed. The effects of engineering works on maritime environments and resources, with the Chesapeake Bay as the area of prime interest are examined. Significant engineering projects, both actual and proposed, are described. The conflict of navigational demands and maintenance of an estuarine environment for commercial and sport fishing and recreation is described. Specific applications of remote sensors for analyzing ecological conditions of the bay are included.

KENNEDY SPACE CENTER, FLA. - On a tour of the Orbiter Processing Facility, Center Director Jim Kennedy (left) looks at an external tank door corrosion work being done on Endeavour. At right, Tom Roberts, Airframe Engineering System specialist with United Space Alliance, is describing the work. At right is Kathy Laufenberg, Orbiter Airframe Engineering ground area manager,also with USA. Endeavour is in its Orbiter Major Modification period, which began in December 2003.

NASA Image and Video Library

2004-02-25

KENNEDY SPACE CENTER, FLA. - On a tour of the Orbiter Processing Facility, Center Director Jim Kennedy (left) looks at an external tank door corrosion work being done on Endeavour. At right, Tom Roberts, Airframe Engineering System specialist with United Space Alliance, is describing the work. At right is Kathy Laufenberg, Orbiter Airframe Engineering ground area manager,also with USA. Endeavour is in its Orbiter Major Modification period, which began in December 2003.

Effect of evaporation and condensation on a thermoacoustic engine: A Lagrangian simulation approach.

PubMed

Yasui, Kyuichi; Izu, Noriya

2017-06-01

Acoustic oscillations of a fluid (a mixture of gas and vapor) parcel in a wet stack of a thermoacoustic engine are numerically simulated with a Lagrangian approach taking into account Rott equations and the effect of non-equilibrium evaporation and condensation of water vapor at the stack surface. In a traveling-wave engine, the volume oscillation amplitude of a fluid parcel always increases by evaporation and condensation. As a result, pV work done by a fluid parcel is enhanced, which means enhancement of acoustic energy in a thermoacoustic engine. On the other hand, in a standing-wave engine, the volume oscillation amplitude sometimes decreases by evaporation and condensation, and pV work is suppressed. Presence of a tiny traveling-wave component, however, results in the enhancement of pV work by evaporation and condensation.

Engineering: Defining and differentiating its unique culture

NASA Astrophysics Data System (ADS)

Pilotte, Mary K.

The world of work for engineering professionals is changing. At a rapid pace, experienced engineers are exiting the workforce due to retirement of the Baby Boomer generation, while at the same time the problems facing engineers are increasingly complex and frequently global in nature. For firms to protect their knowledge assets, they must ensure that acquired understandings are shared among their engineering work groups. Engineering teaching and learning in the workplace (i.e., knowledge sharing), is a social activity that resides in a social context governed by the professional engineering culture. This quantitative study uses Hofstede's Organizational Cultural Values Model (Hofstede, Neuijen, Ohayv, & Sanders, 1990) to examine dimensions of engineering culture in the workplace, producing a central tendency profile of engineering's cultural practices. Further, it explores through hypotheses if demographic differentiators, including birth generation, gender, race, industry sector of employment, and engineering discipline, play roles in forming engineering cultural practices. Results both corroborate aspects of Hofstede's model and assert new understandings relative to factors influencing dimensions of engineering practice. Outcomes are discussed in terms of their potential impact on industrial knowledge sharing and formation of beneficial engineering cultures.

Concepts of Mathematics for Students of Physics and Engineering: A Dictionary

NASA Technical Reports Server (NTRS)

Kolecki, Joseph C.

2003-01-01

A physicist with an engineering background, the author presents a mathematical dictionary containing material encountered over many years of study and professional work at NASA. This work is a compilation of the author's experience and progress in the field of study represented and consists of personal notes and observations that can be used by students in physics and engineering.

Energy and Greenhouse Gas Emission Reduction Opportunities for Civil Works Projects Unique to the US Army Corps of Engineers

DTIC Science & Technology

2012-10-26

3600 hp diesel engine .................................................................................. 24 20 Diesel engine turbocharger ...ERDC/CERL TR-12-19 24 Figure 19. Fairbanks Morse 3600 hp diesel engine. Figure 20. Diesel engine turbocharger . Table 7. Energy consuming

RE-1000 free-piston Stirling engine update

NASA Technical Reports Server (NTRS)

Schreiber, J. G.

1985-01-01

A free piston Stirling engine was tested. The tests performed over the past several years on the single cylinder engine were designed to investigate the dynamics of a free piston Stirling engine. The data are intended to be used primarily for computer code validation. The tests designed to investigate the sensitivity of the engine performance to variations in working space pressure, heater and cooler temperatures, regenerator porosity, power piston mass and displacer dynamics were completed. In addition, some data were recorded with alternate working fluids. A novel resonant balance system for the engine was also tested. Some preliminary test results of the tests performed are presented along with an outline of future tests to be run with the engine coupled to a hydraulic output unit. A description of the hydraulic output unit is given.

Locomotive Engineer's Activity Diary

DOT National Transportation Integrated Search

1996-09-01

About 200 freight engineers working on several major railroads completed a 14-day diary recording such data as: the demographic characteristics of the participants; how much time they spent working, sleeping at home, sleeping away from home, commutin...

Locomotive engineer's activity diary.

DOT National Transportation Integrated Search

1996-09-01

About 200 freight engineers working on several major railroads completed a 14-day diary recording such data as: the demographic characteristics of the participants; how much time they spent working, sleeping at home, sleeping away from home, commutin...

Superconducting Qubits as Mechanical Quantum Engines

NASA Astrophysics Data System (ADS)

Sachtleben, Kewin; Mazon, Kahio T.; Rego, Luis G. C.

2017-09-01

We propose the equivalence of superconducting qubits with a pistonlike mechanical quantum engine. The work reports a study on the nature of the nonequilibrium work exchanged with the quantum-nonadiabatic working medium, which is modeled as a multilevel coupled quantum well system subject to an external control parameter. The quantum dynamics is solved for arbitrary control protocols. It is shown that the work output has two components: one that depends instantaneously on the level populations and another that is due to the quantum coherences built in the system. The nonadiabatic coherent dynamics of the quantum engine gives rise to a resistance (friction) force that decreases the work output. We consider the functional equivalence of such a device and a rf-SQUID flux qubit.

13. INTERIOR OF ENGINE ROOM, CONTAINING MESTACORLISS CROSSCOMPOUND ENGINE, FOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. INTERIOR OF ENGINE ROOM, CONTAINING MESTA-CORLISS CROSS-COMPOUND ENGINE, FOR 40" BLOOMING MILL. THIS VIEW HIGHLIGHTS THE CRANK AND 24' DIAMETER FLYWHEEL. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

Human Systems Integration Competency Development for Navy Systems Commands

DTIC Science & Technology

2012-09-01

cognizance of Applied Engineering /Psychology relative to knowledge engineering, training, teamwork, user interface design and decision sciences. KSA...cognizance of Applied Engineering /Psychology relative to knowledge engineering, training, teamwork, user interface design and decision sciences...requirements (as required). Fundamental cognizance of Applied Engineering / Psychology relative to knowledge engineering, training, team work, user

16. INTERIOR OF ENGINE ROOM, CONTAINING MESTACORLISS CROSSCOMPOUND ENGINE, FOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

16. INTERIOR OF ENGINE ROOM, CONTAINING MESTA-CORLISS CROSS-COMPOUND ENGINE, FOR 40" BLOOMING MILL. THIS VIEW IS TAKEN FROM THE HIGH-PRESSURE SIDE OF THE ENGINE SHOWING THE SERVICE PLATFORM - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

The Effects of Segmented Multimedia Worked Examples and Self-Explanations on Acquisition of Conceptual Knowledge and Problem-Solving Performance in an Undergraduate Engineering Course

ERIC Educational Resources Information Center

Kapli, Natalia V.

2010-01-01

The study investigated the effects of non-segmented multimedia worked examples (NS-MWE), segmented multimedia worked examples (S-MWE), and segmented multimedia worked examples enhanced with self-explanation prompts (S-MWE-SE) on acquisition of conceptual knowledge and problem solving performance in an undergraduate engineering course. In addition,…

36 CFR 327.30 - Shoreline Management on Civil Works Projects.

Code of Federal Regulations, 2010 CFR

2010-07-01

... ADMINISTERED BY THE CHIEF OF ENGINEERS § 327.30 Shoreline Management on Civil Works Projects. (k) * * * The Fee... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Shoreline Management on Civil Works Projects. 327.30 Section 327.30 Parks, Forests, and Public Property CORPS OF ENGINEERS, DEPARTMENT...

An Australian Study of Possible Selves Perceived by Undergraduate Engineering Students

ERIC Educational Resources Information Center

Bennett, Dawn; Male, Sally A.

2017-01-01

In this study, we worked with second-year engineering students at an Australian university to examine previously identified threshold concepts within the theoretical framework of Possible Selves. Using workshops as the context for intensive work with students, students were encouraged to consider their future lives and work, including their…

Project-Based Learning as a Contributing Factor to Graduates' Work Readiness

ERIC Educational Resources Information Center

Jollands, Margaret; Jolly, Lesley; Molyneaux, Tom

2012-01-01

This paper explores what work readiness means for two cohorts of graduate engineers, one from a traditional curriculum, the second from a largely project-based curriculum. Professional bodies and employers have defined a set of attributes for engineering graduates so that graduates will be "work ready". Problem-based learning (PBL) is…

32 CFR 644.462 - Performance of restoration work by district engineer-extension of time.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 4 2013-07-01 2013-07-01 false Performance of restoration work by district engineer-extension of time. 644.462 Section 644.462 National Defense Department of Defense (Continued... Leasehold Improvements § 644.462 Performance of restoration work by district engineer—extension of time...

36 CFR 327.30 - Shoreline Management on Civil Works Projects.

Code of Federal Regulations, 2011 CFR

2011-07-01

... ADMINISTERED BY THE CHIEF OF ENGINEERS § 327.30 Shoreline Management on Civil Works Projects. (k) * * * The Fee... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Shoreline Management on Civil Works Projects. 327.30 Section 327.30 Parks, Forests, and Public Property CORPS OF ENGINEERS, DEPARTMENT...

36 CFR 327.30 - Shoreline Management on Civil Works Projects.

Code of Federal Regulations, 2012 CFR

2012-07-01

... ADMINISTERED BY THE CHIEF OF ENGINEERS § 327.30 Shoreline Management on Civil Works Projects. (k) * * * The Fee... 36 Parks, Forests, and Public Property 3 2012-07-01 2012-07-01 false Shoreline Management on Civil Works Projects. 327.30 Section 327.30 Parks, Forests, and Public Property CORPS OF ENGINEERS, DEPARTMENT...

36 CFR 327.30 - Shoreline Management on Civil Works Projects.

Code of Federal Regulations, 2014 CFR

2014-07-01

... ADMINISTERED BY THE CHIEF OF ENGINEERS § 327.30 Shoreline Management on Civil Works Projects. (k) * * * The Fee... 36 Parks, Forests, and Public Property 3 2014-07-01 2014-07-01 false Shoreline Management on Civil Works Projects. 327.30 Section 327.30 Parks, Forests, and Public Property CORPS OF ENGINEERS, DEPARTMENT...

The thermodynamic efficiency of heat engines with friction

NASA Astrophysics Data System (ADS)

Bizarro, João P. S.

2012-04-01

The presence of the work done against friction is incorporated into the analysis of the efficiency of heat engines based on the first and second laws of thermodynamics. We obtain the efficiencies of Stirling and Brayton engines with friction and recover results known from finite-time thermodynamics. We show that ηfric/η ≈ (1 - Wfric/W), where ηfric/η is the ratio of the efficiencies with and without friction and Wfric/W is the fraction of the work W performed by the working fluid which is spent against friction forces.

Analysis of Office/Laboratory Staying Hour and Home Working Hour of Japanese Scientists and Engineers

NASA Astrophysics Data System (ADS)

Ejiri, A.

The second questionnaire for scientists and engineers was carried out in 2007, and status of Japanese scientists and engineers were analyzed and reported. A part of the data was reanalyzed from the viewpoint of work life balance. In particular, office/laboratory staying hour and home working hour were analyzed and dependences on various factors were investigated. It was found that these hours depend on gender, marital status, number of child, employment status and age. In addition, the total hours tend to be kept constant regardless of various factors.

Tailoring Systems Engineering Processes in a Conceptual Design Environment: A Case Study at NASA Marshall Spaceflight Center's ACO

NASA Technical Reports Server (NTRS)

Mulqueen, John; Maples, C. Dauphne; Fabisinski, Leo, III

2012-01-01

This paper provides an overview of Systems Engineering as it is applied in a conceptual design space systems department at the National Aeronautics and Space Administration (NASA) Marshall Spaceflight Center (MSFC) Advanced Concepts Office (ACO). Engineering work performed in the NASA MFSC's ACO is targeted toward the Exploratory Research and Concepts Development life cycle stages, as defined in the International Council on Systems Engineering (INCOSE) System Engineering Handbook. This paper addresses three ACO Systems Engineering tools that correspond to three INCOSE Technical Processes: Stakeholder Requirements Definition, Requirements Analysis, and Integration, as well as one Project Process Risk Management. These processes are used to facilitate, streamline, and manage systems engineering processes tailored for the earliest two life cycle stages, which is the environment in which ACO engineers work. The role of systems engineers and systems engineering as performed in ACO is explored in this paper. The need for tailoring Systems Engineering processes, tools, and products in the ever-changing engineering services ACO provides to its customers is addressed.

Status, Vision, and Challenges of an Intelligent Distributed Engine Control Architecture

NASA Technical Reports Server (NTRS)

Behbahani, Alireza; Culley, Dennis; Garg, Sanjay; Millar, Richard; Smith, Bert; Wood, Jim; Mahoney, Tim; Quinn, Ronald; Carpenter, Sheldon; Mailander, Bill;

When Measurement Benefits the Measured

DTIC Science & Technology

2014-04-23

manage how you estimate your work and how you manage the quality of our work. Knowledge workers manage themselves with data. Software engineers...development, coaching, and training. His current research and development interests include data quality assessment and improvement, project...was an engineer and manager at Boeing in Seattle. He has a Masters Degree in Systems Engineering and is a senior member of IEEE. Mark is a certified

Legacy System Engineering, VPERC Consortium

DTIC Science & Technology

2009-09-01

REPORT Legacy System Engineering, VPERC Consortium, Final Report, University of Utah for Work Ending Joly 15, 2009. 14. ABSTRACT 16. SECURITY...Engineering, VPERC Consortium, Final Report, University of Utah for Work Ending Joly 15, 2009. Report Title ABSTRACT This paper is one of three...Sons, 1995. [3] Turner MJ, Clough RW, Martin HC, Topp LJ. “Stiffness and deflection analysis of complex structures.” Journal of the Aeronautical

Eddie Patterson enjoyed "flying" a C-17 simulator during Take Your Children to Work Day June 22 while Dryden engineer Ken Norlin and other students look on

NASA Image and Video Library

2004-06-22

Eddie Patterson, a fourth-grade student at Tehachapi's Tompkins Elementary School, enjoyed "flying" a C-17 multi-engine aircraft simulator during Take Your Children to Work Day June 22 at NASA Dryden Flight Research Center while NASA Dryden engineer Ken Norlin and other students look on.

A static organization in a dynamic context--A qualitative study of changes in working conditions for Swedish engine officers.

PubMed

Lundh, Monica; Rydstedt, Leif W

2016-07-01

During the last decades the shipping industry has undergone rapid technical developments and experienced hard economic conditions and increased striving for profitability. This has led to reduced staffing and changes in task performance, which has been reported to increase workload for the remaining seafarers. The working conditions on board have a number of distinct and in many ways unique characteristics, which makes the job demands and resources for seafarers unique in several ways. The purpose of this study was to assess how engine room staff perceives how these major technical and organizational changes in the shipping industry have affected job demands as well as resources. The study compiled individual interviews and focus groups interviews with engine crew members where they were asked to elaborate on the psychosocial work environment and the major changes in the working conditions on board. Engine crew describes a work situation where they feel a lack of resources. The content of the work has changed, staffing has been reduced, new tasks are being added but the organization of the crew and the design of the work place remains unaltered. Copyright © 2016 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Programming (Tips) for Physicists & Engineers

ScienceCinema

Ozcan, Erkcan

2018-02-19

Programming for today's physicists and engineers. Work environment: today's astroparticle, accelerator experiments and information industry rely on large collaborations. Need more than ever: code sharing/resuse, code building--framework integration, documentation and good visualization, working remotely, not reinventing the wheel.

36 CFR 330.2 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 330.2 Parks, Forests, and Public Property CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY REGULATION OF LAW ENFORCEMENT SERVICES CONTRACTS AT CIVIL WORKS WATER RESOURCE PROJECTS ADMINISTERED BY THE CHIEF OF ENGINEERS... responsibilities for Civil Works water resource development projects. ...

Programming (Tips) for Physicists & Engineers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ozcan, Erkcan

2010-07-13

Programming for today's physicists and engineers. Work environment: today's astroparticle, accelerator experiments and information industry rely on large collaborations. Need more than ever: code sharing/resuse, code building--framework integration, documentation and good visualization, working remotely, not reinventing the wheel.

78 FR 21700 - Aviation Rulemaking Advisory Committee Meeting on Transport Airplane and Engine Issues

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-11

... Report Flight Controls Harmonization Working Group Report Aging Airplanes Working Group Report Engine... person listed in the FOR FURTHER INFORMATION CONTACT section. Sign and oral interpretation, as well as a...

Self-Oscillating Josephson Quantum Heat Engine

NASA Astrophysics Data System (ADS)

Marchegiani, G.; Virtanen, P.; Giazotto, F.; Campisi, M.

2016-11-01

The design of a mesoscopic self-oscillating heat engine that works thanks to purely quantum effects is presented. The proposed scheme is amenable to experimental implementation with current state-of-the-art nanotechnology and materials. One of the main features of the structure is its versatility: The engine can deliver work to a generic load without galvanic contact. This versatility makes it a promising building block for low-temperature on-chip energy-management applications. The heat engine consists of a circuit featuring a thermoelectric element based on a ferromagnetic insulator-superconductor tunnel junction and a Josephson weak link that realizes a purely quantum dc-ac converter. This makeup enables the contactless transfer of work to the load (a generic RL circuit). The performance of the heat engine is investigated as a function of the thermal gradient applied to the thermoelectric junction. Power up to 1 pW can be delivered to a load RL=10 Ω .

Single-ion quantum Otto engine with always-on bath interaction

NASA Astrophysics Data System (ADS)

Chand, Suman; Biswas, Asoka

2017-06-01

We demonstrate how the reciprocating heat cycle of a quantum Otto engine (QOE) can be implemented using a single ion and an always-on thermal environment. The internal degree of freedom of the ion is chosen as the working fluid, while the motional degree of freedom can be used as the cold bath. We show, that by adiabatically changing the local magnetic field, the work efficiency can be asymptotically made unity. We propose a projective measurement of the internal state of the ion that mimics the release of heat from the working fluid during the engine cycle. In our proposal, the coupling to the hot and the cold baths need not be switched off and on in an alternate fashion during the engine cycle, unlike other existing proposals of QOE. This renders the proposal experimentally feasible using the available tapped-ion engineering technology.

Control system for, and a method of, heating an operator station of a work machine

DOEpatents

Baker, Thomas M.; Hoff, Brian D.; Akasam, Sivaprasad

2005-04-05

There are situations in which an operator remains in an operator station of a work machine when an engine of the work machine is inactive. The present invention includes a control system for, and a method of, heating the operator station when the engine is inactive. A heating system of the work machine includes an electrically-powered coolant pump, a power source, and at least one piece of warmed machinery. An operator heat controller is moveable between a first and a second position, and is operable to connect the electrically-powered coolant pump to the power source when the engine is inactive and the operator heat controller is in the first position. Thus, by deactivating the engine and then moving the operator heat controller to the first position, the operator may supply electrical energy to the electrically-powered coolant pump, which is operably coupled to heat the operator station.

Energy efficient engine high pressure turbine ceramic shroud support technology report

NASA Technical Reports Server (NTRS)

Nelson, W. A.; Carlson, R. G.

1982-01-01

This work represents the development and fabrication of ceramic HPT (high pressure turbine) shrouds for the Energy Efficient Engine (E3). Details are presented covering the work performed on the ceramic shroud development task of the NASA/GE Energy Efficient Engine (E3) component development program. The task consists of four phases which led to the selection of a ZrO2-BY2O3 ceramic shroud material system, the development of an automated plasma spray process to produce acceptable shroud structures, the fabrication of select shroud systems for evaluation in laboratory, component, and CF6-50 engine testing, and finally, the successful fabrication of ZrO2-8Y2O3/superpeg, engine quality shrouds for the E3 engine.

A solar engine using the thermal expansion of metals.

NASA Technical Reports Server (NTRS)

Beam, R.; Jedlicka, J.

1973-01-01

A thermal engine which uses solid metal as the single-phase working substance to convert solar energy into small amounts of mechanical energy is described. Test data are given for an engine whose working substance was annealed 304-type steel welded into a thin-walled tube that was mounted in a bearing at each end (making it free to rotate about its axis) with a flywheel mass at its midpoint. When heated on its upper surface, the tube rotates producing steady power. The theory of the engine is outlined.

Engineering mechanics: statics and dynamics. [Textbook

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sandor, B.I.

1983-01-01

The purpose of this textbook is to provide engineering students with basic learning material about statics and dynamics which are fundamental engineering subjects. The chapters contain information on: an introduction to engineering mechanics; forces on particles, rigid bodies, and structures; kinetics of particles, particle systems, and rigid bodies in motion; kinematics; mechanical vibrations; and friction, work, moments of inertia, and potential energy. Each chapter contains introductory material, the development of the essential equations, worked-out example problems, homework problems, and, finally, summaries of the essential methods and equations, graphically illustrated where appropriate. (LCL)

Integrating rehabilitation engineering technology with biologics.

PubMed

Collinger, Jennifer L; Dicianno, Brad E; Weber, Douglas J; Cui, Xinyan Tracy; Wang, Wei; Brienza, David M; Boninger, Michael L

2011-06-01

Rehabilitation engineers apply engineering principles to improve function or to solve challenges faced by persons with disabilities. It is critical to integrate the knowledge of biologics into the process of rehabilitation engineering to advance the field and maximize potential benefits to patients. Some applications in particular demonstrate the value of a symbiotic relationship between biologics and rehabilitation engineering. In this review we illustrate how researchers working with neural interfaces and integrated prosthetics, assistive technology, and biologics data collection are currently integrating these 2 fields. We also discuss the potential for further integration of biologics and rehabilitation engineering to deliver the best technologies and treatments to patients. Engineers and clinicians must work together to develop technologies that meet clinical needs and are accessible to the intended patient population. Copyright © 2011 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

Problem Solving and Engineering Design, Introducing Bachelor Students to Engineering Practice at K. U. Leuven

ERIC Educational Resources Information Center

Heylen, Christel; Smet, Marc; Buelens, Hermans; Sloten, Jos Vander

2007-01-01

A present-day engineer has a large scientific knowledge; he is a team-player, eloquent communicator and life-long learner. At the Katholieke Universiteit Leuven, the course "Problem Solving and Engineering Design" introduces engineering students from the first semester onwards into real engineering practice and teamwork. Working in small…

Educating the Engineer of 2020: Adapting Engineering Education to the New Century

ERIC Educational Resources Information Center

National Academies Press, 2005

2005-01-01

"Educating the Engineer of 2020" is grounded by the observations, questions, and conclusions presented in the best-selling book "The Engineer of 2020: Visions of Engineering in the New Century." This new book offers recommendations on how to enrich and broaden engineering education so graduates are better prepared to work in a…

The Educational Needs of Graduate Mechanical Engineers in New Zealand.

ERIC Educational Resources Information Center

Deans, J.

1999-01-01

Surveys graduate and undergraduate mechanical engineering students at the University of Auckland. Shows that the dominant work activities of New Zealand mechanical engineers include design and consultancy and that graduate engineers rapidly migrate into management. (Author/CCM)

6. DETAIL OF UNITEDTOD TWINTANDEM STEAM ENGINE, SHOWING CRANK END ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. DETAIL OF UNITED-TOD TWIN-TANDEM STEAM ENGINE, SHOWING CRANK END OF LOW PRESSURE SIDE OF ENGINE. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

Ontology engineering for management of data in the transportation domain.

DOT National Transportation Integrated Search

2008-11-01

This report discusses work done as a collaboration between the Kansas Department of Transportation, the University of Kansas Civil Engineering Department, and the Dakota State University School of Business and Information Systems. The work was an exa...

36 CFR § 327.30 - Shoreline Management on Civil Works Projects.

Code of Federal Regulations, 2013 CFR

2013-07-01

... ADMINISTERED BY THE CHIEF OF ENGINEERS § 327.30 Shoreline Management on Civil Works Projects. (k) * * * The Fee... 36 Parks, Forests, and Public Property 3 2013-07-01 2012-07-01 true Shoreline Management on Civil Works Projects. § 327.30 Section § 327.30 Parks, Forests, and Public Property CORPS OF ENGINEERS...

Work Processes, Role Conflict, and Role Overload: The Case of Nurses and Engineers in the Public Sector.

ERIC Educational Resources Information Center

Bacharach, Samuel B.; And Others

1990-01-01

Study of five sets of work process variables and their relationship to role conflict and overload among public sector nurses and engineers found managerial strategies appropriate for minimizing role conflict not necessarily appropriate for minimizing role overload. Some work process predictors may be similar across professions, and managerial…

A Buddhist perspective on industrial engineering and the design of work.

PubMed

Lee, Wei-Tau; Blumenthal, James A; Funk, Kenneth H

2014-06-01

The modern way of life is highly dependent upon the production of goods by industrial organizations that are in turn dependent upon their workers for their ongoing operations. Even though more than a century has passed since the dawn of the industrial revolution, many dangerous aspects of work, both physical and mental, remain in the workplace today. Using Buddhist philosophical principles, this paper suggests that although many sources of the problem reside within the larger society, the industrial engineer is still a key factor in bettering work and providing a workplace suitable for their fellow workers. Drawing on these insights, we present a number of work design guidelines that industrial engineers who abide by Buddhist principles could practice to help overcome some of the many sufferings produced by modern work.

RE-1000 free-piston Stirling engine hydraulic output system description

NASA Technical Reports Server (NTRS)

Schreiber, Jeffrey G.; Geng, Steven M.

1987-01-01

The NASA Lewis Research Center was involved in free-piston Stirling engine research since 1976. Most of the work performed in-house was related to characterization of the RE-1000 engine. The data collected from the RE-1000 tests were intended to provide a data base for the validation of Stirling cycle simulations. The RE-1000 was originally build with a dashpot load system which did not convert the output of the engine into useful power, but was merely used as a load for the engine to work against during testing. As part of the interagency program between NASA Lewis and the Oak Ridge National Laboratory, (ORNL), the RE-1000 was converted into a configuration that produces useable hydraulic power. A goal of the hydraulic output conversion effort was to retain the same thermodynamic cycle that existed with the dashpot loaded engine. It was required that the design must provide a hermetic seal between the hydraulic fluid and the working gas of the engine. The design was completed and the hardware was fabricated. The RE-1000 was modified in 1985 to the hydraulic output configuration. The early part of the RE-1000 hydraulic output program consisted of modifying hardware and software to allow the engine to run at steady-state conditions. A complete description of the engine is presented in sufficient detail so that the device can be simulated on a computer. Tables are presented showing the masses of the oscillating components and key dimensions needed for modeling purposes. Graphs are used to indicate the spring rate of the diaphragms used to separate the helium of the working and bounce space from the hydraulic fluid.

Low-Power Baseline Test Results for the GPU 3 Stirling Engine

NASA Technical Reports Server (NTRS)

Thieme, L. G.

1979-01-01

A 7.5 kW (10 hp) Stirling engine was converted to a research configuration in order to obtain data for validating Stirling-cycle computer simulations. Test results for a range of heater-tube gas temperatures, mean compression-space pressures, and engine speeds with both helium and hydrogen as the working fluid are summarized. An instrumentation system to determine indicated work is described and preliminary results are presented.

11. DETAIL OF UNITEDTOD TWINTANDEM STEAM ENGINE, SHOWING HIGHPRESSURE CYLINDER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. DETAIL OF UNITED-TOD TWIN-TANDEM STEAM ENGINE, SHOWING HIGH-PRESSURE CYLINDER AND VALVE, AND LUBRICATING EQUIPMENT FOR ENGINE. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

Career preference theory: A grounded theory describing the effects of undergraduate career preferences on student persistence in engineering

NASA Astrophysics Data System (ADS)

Dettinger, Karen Marie

This study used grounded theory in a case study at a large public research university to develop a theory about how the culture in engineering education affects students with varying interests and backgrounds. According to Career Preference Theory, the engineering education system has evolved to meet the needs of one type of student, the Physical Scientist. While this educational process serves to develop the next generation of engineering faculty members, the majority of engineering undergraduates go on to work as practicing engineers, and are far removed from working as physical scientists. According to Career Preference Theory, students with a history of success in mathematics and sciences, and a focus on career, enter engineering. These students, who actually have a wide range of interests and values, each begin seeking an identity as a practicing engineer. Career Preference Theory is developed around a concept, Career Identity Type, that describes five different types of engineering students: Pragmatic, Physical Scientist, "Social" Scientist, Designer, and Educator. According to the theory, each student must develop an identity within the engineering education system if they are to persist in engineering. However, the current undergraduate engineering education system has evolved in such a way that it meets only the needs of the Physical Scientist. Pragmatic students are also likely to succeed because they tend to be extremely goal-focused and maintain a focus on the rewards they will receive once they graduate with an engineering degree. However, "Social" Scientists, who value interpersonal relationships and giving back to society; Designers, who value integrating ideas across disciplines to create aesthetically pleasing and useful products; and Educators, who have a strong desire to give back to society by working with young people, must make some connection between these values and a future engineering career if they are to persist in engineering. According to Career Preference Theory, "Social" Scientists, Designers, and Educators are likely to leave engineering, while Pragmatics and Physical Scientists are likely to persist.

The physical work environment and end-user requirements: Investigating marine engineering officers' operational demands and ship design.

PubMed

Mallam, Steven C; Lundh, Monica

2016-08-12

Physical environments influence how individuals perceive a space and behave within it. Previous research has revealed deficiencies in ship engine department work environments, and their impact on crew productivity, health and wellbeing. Connect operational task demands to pragmatic physical design and layout solutions by implementing a user-centric perspective. Three focus groups, each consisting of three marine engineers participated in this study. Focus groups were divided into two sessions: first, to investigate the end-user's operational requirements and their relationship with ship physical design and layout. Second, criteria formulated from group discussions were applied to a ship design case study. All focus group sessions were audio recorded and transcribed verbatim. The data were analyzed using Grounded Theory. Design choices made in a ships general arrangement were described to inherently influence how individuals and teams are able to function within the system. Participants detailed logistical relationships between key areas, stressing that the work environment and physical linkages must allow for flexibility of work organization and task execution. Traditional engine control paradigms do not allow effective mitigation of traditional engine department challenges. The influence of technology and modernization of ship systems can facilitate improvement of physical environments and work organization if effectively utilized.

Systems Engineering Processes at NASA/SR-71 Pratt and Whitney J58 Engine

NASA Technical Reports Server (NTRS)

Donastorg, Cristina

2010-01-01

This summer I was given several opportunities at NASA's Dryden Flight Research Center (DFRC). The first opportunity was given to me by a Senior Propulsion Engineer, Kurtt Kloesel, to work in a specialized engineering discipline. My task was to research the Pratt & Whitney J58 engine that was used on the SR-71 Blackbird. I entered the data I collected into engine modeling software programs in order to receive certain outputs, such as net thrust. I also had to take a "crash course" in propulsion in order to better understand the research I was performing. To facilitate my understanding of propulsion principals and formulas, I worked many problems out of thermodynamics and propulsion textbooks and entered the given values of various situations into the modeling software.

Engineering Delivery Vehicles for Genome Editing.

PubMed

Nelson, Christopher E; Gersbach, Charles A

2016-06-07

The field of genome engineering has created new possibilities for gene therapy, including improved animal models of disease, engineered cell therapies, and in vivo gene repair. The most significant challenge for the clinical translation of genome engineering is the development of safe and effective delivery vehicles. A large body of work has applied genome engineering to genetic modification in vitro, and clinical trials have begun using cells modified by genome editing. Now, promising preclinical work is beginning to apply these tools in vivo. This article summarizes the development of genome engineering platforms, including meganucleases, zinc finger nucleases, TALENs, and CRISPR/Cas9, and their flexibility for precise genetic modifications. The prospects for the development of safe and effective viral and nonviral delivery vehicles for genome editing are reviewed, and promising advances in particular therapeutic applications are discussed.

How Engineers Engineer: Lessons from My First Big Engineering Project

ERIC Educational Resources Information Center

Roman, Harry T.

2008-01-01

Little did the author realize how much his first engineering project would change his career path, but when it came, he was hooked forever on doing R&D-type engineering. In this article, the author takes the reader back to his first really important electrical engineering project. While the technology he worked on back then is antiquated by…

"Scholarship of Impact" Framework in Engineering Education Research: Learnings from the Institute for Scholarship on Engineering Education. Research Brief

ERIC Educational Resources Information Center

Lande, Micah; Adams, Robin; Chen, Helen; Currano, Becky; Leifer, Larry

2007-01-01

The Institute for Scholarship on Engineering Education (ISEE) program is one element of the NSF-sponsored Center for the Advancement of Engineering Education (CAEE). Its primary goal is to build a community of engineering education scholars who can think and work across disciplines with an ultimate aim of improving the engineering student…

Initial test results with a single-cylinder rhombic-drive Stirling engine. [to be applied to automobile engine design to conserve energy

NASA Technical Reports Server (NTRS)

Cairelli, J. E.; Thieme, L. G.; Walter, R. J.

1978-01-01

A 6 kW (8 hp), single-cylinder, rhombic-drive Stirling engine was restored to operating condition, and preliminary characterization tests run with hydrogen and helium as the working gases. Initial tests show the engine brake specific fuel consumption (BSFC) with hydrogen working gas to be within the range of BSFC observed by the Army at Fort Belvoir, Virginia, in 1966. The minimum system specific fuel consumption (SFC) observed during the initial tests with hydrogen was 669 g/kW hr (1.1 lb/hpx hr), compared with 620 g/kWx hr (1.02 lb/hpx hr) for the Army tests. However, the engine output power for a given mean compression-space pressure was lower than for the Army tests. The observed output power at a working-space pressure of 5 MPa (725 psig) was 3.27 kW (4.39 hp) for the initial tests and 3.80 kW (5.09 hp) for the Army tests. As expected, the engine power with helium was substantially lower than with hydrogen.

Developing Avionics Hardware and Software for Rocket Engine Testing

NASA Technical Reports Server (NTRS)

Aberg, Bryce Robert

2014-01-01

My summer was spent working as an intern at Kennedy Space Center in the Propulsion Avionics Branch of the NASA Engineering Directorate Avionics Division. The work that I was involved with was part of Rocket University's Project Neo, a small scale liquid rocket engine test bed. I began by learning about the layout of Neo in order to more fully understand what was required of me. I then developed software in LabView to gather and scale data from two flowmeters and integrated that code into the main control software. Next, I developed more LabView code to control an igniter circuit and integrated that into the main software, as well. Throughout the internship, I performed work that mechanics and technicians would do in order to maintain and assemble the engine.

Multimedia category preferences of working engineers

NASA Astrophysics Data System (ADS)

Baukal, Charles E.; Ausburn, Lynna J.

2016-09-01

Many have argued for the importance of continuing engineering education (CEE), but relatively few recommendations were found in the literature for how to use multimedia technologies to deliver it most effectively. The study reported here addressed this gap by investigating the multimedia category preferences of working engineers. Four categories of multimedia, with two types in each category, were studied: verbal (text and narration), static graphics (drawing and photograph), dynamic non-interactive graphics (animation and video), and dynamic interactive graphics (simulated virtual reality (VR) and photo-real VR). The results showed that working engineers strongly preferred text over narration and somewhat preferred drawing over photograph, animation over video, and simulated VR over photo-real VR. These results suggest that a variety of multimedia types should be used in the instructional design of CEE content.

Small Engines Care, Operation, Maintenance and Repair. Volume I.

ERIC Educational Resources Information Center

Turner, J. Howard

Developed by teacher educators and agricultural engineers and tested by vocational agriculture teachers, this reference is for student and teacher use as part of a course on servicing and operating an engine. Content includes: (1) Distinguishing Features of Small Engines, (2) How Small Gasoline Engines Work, (3) Comparing 4-(Stroke)Cycle and…

Engineering Play: Exploring Associations with Executive Function, Mathematical Ability, and Spatial Ability in Preschool

ERIC Educational Resources Information Center

Gold, Zachary Samuel

2017-01-01

Engineering play is a new perspective on preschool education that views constructive play as an engineering design process that parallels the way engineers think and work when they develop engineered solutions to human problems (Bairaktarova, Evangelou, Bagiati, & Brophy, 2011). Early research from this perspective supports its use in framing…

Design and Assessment of an "Engineering" Course for Non-Majors

ERIC Educational Resources Information Center

Sorby, Sheryl A.; Oppliger, Douglas E.; Boersma, Norma

2006-01-01

As a profession, engineering is not well understood by the general public. Engineers are perceived as "geeks" who love math and who have few interests outside of technical work. In short, the engineering profession has an image problem. In order to counteract this negative stereotyping, an engineering course for non-majors was developed…

A Multidisciplinary Engineering Summer School in an Industrial Setting

ERIC Educational Resources Information Center

Larsen, Peter Gorm; Fernandes, Joao M.; Habel, Jacek; Lehrskov, Hanne; Vos, Richard J. C.; Wallington, Oliver; Zidek, Jan

2009-01-01

Most university-level engineering studies produce technically skilled engineers. However, typically students face several difficulties when working in multidisciplinary teams when they initiate their industrial careers. In a globalised world, it becomes increasingly important that engineers are capable of collaborating across disciplinary…

32 CFR 555.2 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Experiment Station (WES), the U.S. Army Construction Engineering Research Laboratory (CERL), the U.S. Army Engineer Topographic Laboratories (ETL), the U.S. Army Coastal Engineering Research Center (CERC), the U.S... CEMETERIES CORPS OF ENGINEERS, RESEARCH AND DEVELOPMENT, LABORATORY RESEARCH AND DEVELOPMENT AND TESTS, WORK...

Designing Worked Examples in Statics to Promote an Expert Stance: Working THRU vs. Working OUT

ERIC Educational Resources Information Center

Calfee, Robert; Stahovich, Thomas

2011-01-01

The purpose of this study was to examine the performance patterns of freshman engineering students as they completed a tutorial on freebody problems that employed a computer-based pen (CBP) to provide feedback and direct learning. A secondary analysis was conducted on detailed performance data for 16 participants from a freshman Engineering course…

Superconductor Particles As The Working Media Of A Heat Engine

NASA Astrophysics Data System (ADS)

Keefe, Peter D.

2011-12-01

A heat engine is presented in which the working media comprises a multiplicity of mutually isolated particles of Type I superconductor which are selectively processed through H-T phase space so as to convert a heat influx from a high temperature heat reservoir into a useful work output, wherein no heat is rejected to a low temperature heat reservoir.

The Many Faces of a Software Engineer in a Research Community

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marinovici, Maria C.; Kirkham, Harold

2013-10-14

The ability to gather, analyze and make decisions based on real world data is changing nearly every field of human endeavor. These changes are particularly challenging for software engineers working in a scientific community, designing and developing large, complex systems. To avoid the creation of a communications gap (almost a language barrier), the software engineers should possess an ‘adaptive’ skill. In the science and engineering research community, the software engineers must be responsible for more than creating mechanisms for storing and analyzing data. They must also develop a fundamental scientific and engineering understanding of the data. This paper looks atmore » the many faces that a software engineer should have: developer, domain expert, business analyst, security expert, project manager, tester, user experience professional, etc. Observations made during work on a power-systems scientific software development are analyzed and extended to describe more generic software development projects.« less

Colloidal heat engines: a review.

PubMed

Martínez, Ignacio A; Roldán, Édgar; Dinis, Luis; Rica, Raúl A

2016-12-21

Stochastic heat engines can be built using colloidal particles trapped using optical tweezers. Here we review recent experimental realizations of microscopic heat engines. We first revisit the theoretical framework of stochastic thermodynamics that allows to describe the fluctuating behavior of the energy fluxes that occur at mesoscopic scales, and then discuss recent implementations of the colloidal equivalents to the macroscopic Stirling, Carnot and steam engines. These small-scale motors exhibit unique features in terms of power and efficiency fluctuations that have no equivalent in the macroscopic world. We also consider a second pathway for work extraction from colloidal engines operating between active bacterial reservoirs at different temperatures, which could significantly boost the performance of passive heat engines at the mesoscale. Finally, we provide some guidance on how the work extracted from colloidal heat engines can be used to generate net particle or energy currents, proposing a new generation of experiments with colloidal systems.

Usability engineering: domain analysis activities for augmented-reality systems

NASA Astrophysics Data System (ADS)

Gabbard, Joseph; Swan, J. E., II; Hix, Deborah; Lanzagorta, Marco O.; Livingston, Mark; Brown, Dennis B.; Julier, Simon J.

2002-05-01

This paper discusses our usability engineering process for the Battlefield Augmented Reality System (BARS). Usability engineering is a structured, iterative, stepwise development process. Like the related disciplines of software and systems engineering, usability engineering is a combination of management principals and techniques, formal and semi- formal evaluation techniques, and computerized tools. BARS is an outdoor augmented reality system that displays heads- up battlefield intelligence information to a dismounted warrior. The paper discusses our general usability engineering process. We originally developed the process in the context of virtual reality applications, but in this work we are adapting the procedures to an augmented reality system. The focus of this paper is our work on domain analysis, the first activity of the usability engineering process. We describe our plans for and our progress to date on our domain analysis for BARS. We give results in terms of a specific urban battlefield use case we have designed.

Trial of Engineer Educating of Manufacturing Field in Kagoshima National College of Technology

NASA Astrophysics Data System (ADS)

Nakamura, Itaru; Hombu, Mitsuyuki; Kusuhara, Yoshito; Kashine, Kenji; Sakasegawa, Eiichi; Tashima, Daisuke; Fukidome, Hiromi

In Kagoshima National College of Technology, based on investigation with “the job boost measure investigation work in a power supply area” undertaken in the 2005 fiscal year, we accepted the trust from Kyushu Bureau of Economy, Trade and Industry, and undertook “the small-and-medium-sized-enterprises personnel educating work which utilized the technical college etc.” for three years from the 2006 fiscal year to the 2008 fiscal year. As the trial of engineer educating according to the electrical engineering concept to the manufacturing field based on a conventional result, we act as a professor of the base technique for applying alternative energy (a fuel cell and a solar cell) in which social needs are powerful these days, and aim at aiming at cultivation of the problem-solving type engineer who can contribute to a low carbon society through manufacturing, we undertook this work according to the manufacturing bearer educating work (personnel educating and secured work of the manufacturing field) in the 2009 fiscal year of National Federation of Small Business Associations.

7 CFR 1753.94 - Procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... accept the certification only for matters within the staff engineer's area of specialization. In such... certification coordinator. (b) Certification borrowers, shall submit and obtain RUS approval of a work plan before construction and related engineering begin. (1) The work plan shall provide a description of the...

Working as a Team

ERIC Educational Resources Information Center

Brooks, Hannah

2017-01-01

In most STEM industries, teamwork is essential. Engineers, scientists, statisticians, and medical professionals, for example, must communicate with one another and work together. Someday, students may enter the STEM (science, technology, engineering, and math) workforce, where they also will need to collaborate effectively. This article describes…

The Development and Evaluation of Industrial Case Studies to Support a New Laboratory Course in Electrical Engineering.

ERIC Educational Resources Information Center

Bolton, B.; Adderley, K. J.

1978-01-01

After viewing videotaped case studies indicating the relevance of electrical laboratory work to professional engineers, student attitudes showed a positive improvement toward laboratory work. Semantic differential tests, questionnaires, and interviews were used. (Author/MH)

Multiple-state quantum Otto engine, 1D box system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Latifah, E., E-mail: enylatifah@um.ac.id; Purwanto, A.

2014-03-24

Quantum heat engines produce work using quantum matter as their working substance. We studied adiabatic and isochoric processes and defined the general force according to quantum system. The processes and general force are used to evaluate a quantum Otto engine based on multiple-state of one dimensional box system and calculate the efficiency. As a result, the efficiency depends on the ratio of initial and final width of system under adiabatic processes.

NASA Research on General Aviation Power Plants

NASA Technical Reports Server (NTRS)

Stewart, W. L.; Weber, R. J.; Willis, E. A.; Sievers, G. K.

1978-01-01

Propulsion systems are key factors in the design and performance of general aviation airplanes. NASA research programs that are intended to support improvements in these engines are described. Reciprocating engines are by far the most numerous powerplants in the aviation fleet; near-term efforts are being made to lower their fuel consumption and emissions. Longer-term work includes advanced alternatives, such as rotary and lightweight diesel engines. Work is underway on improved turbofans and turboprops.

Comprehensive School Reform: Meta-Analytic Evidence of Black-White Achievement Gap Narrowing1

PubMed Central

Gorey, Kevin M.

2016-01-01

This meta-analysis extends a previous review of the achievement effects of comprehensive school reform (CSR) programs (Borman, Hewes, Overman, & Brown, 2003). That meta-analysis observed significant effects of well endowed and well-researched programs, but it did not account for race/ethnicity. This article synthesizes 34 cohort or quasi-experimental outcomes of studies that incorporated the policy-critical characteristic of race/ethnicity. Findings: compared with matched traditional schools, the black-white achievement gap narrowed significantly more among students in CSR schools. In addition, the aggregate effects were large, substantially to completely eliminating the achievement gap between African American and non-Hispanic white students in elementary and middle schools. Title I policies before or after the No Child Left Behind Act of 2001 seem to have had essentially no impact on the black-white achievement gap. Curricular and testing mandates along with the threat of sanctions without concomitant resource supports seem to have failed. This study suggests that educational achievement inequities need not be America’s destiny. It seems that they could be eliminated through concerted political will and ample resource commitments to evidence-based educational programs. PMID:27453681

The Failure of the 1976 Swine Influenza Immunization Program

PubMed Central

Begley, Sharon L.

1977-01-01

The program to immunize 210 million Americans against swine flu failed. It set back the Federal government's relations with state health agencies, private physicians, pharmaceutical manufacturers, and the insurance industry. It increased mistrust of immunization programs and of government health programs in general. The well-intentioned plan had far-reaching consequences because its scope and the speed with which it was implemented were overreactions to the threat. Its size magnified every one of its faults, legal, medical and political. Organizational and scientific capacity were less than expected. Local health agencies could not administer the program with the inadequate funds from HEW and pharmaceutical companies could not produce a safe, effective children's vaccine. Because of the urgency given the program, Congress neglected the opposition of consumer advocates and state health officials, and did not spend time trying to include immunization against childhood disease in the swine flu program. The failure illustrates the dangers of hasty decisions, of considering only direct medical costs and benefits and not social and political effects on health policy, of launching a public health program whose scientific basis is weak and whose administrative requirements are untested. PMID:610056

KSC-2014-3151

NASA Image and Video Library

2014-07-08

CAPE CANAVERAL, Fla. -- In the KSC Training Auditorium at NASA's Kennedy Space Center in Florida, Dr. Mary Frances Berry, center, accepts a framed poster announcing her appearance from Center Director Robert Cabana, left, who made the opening remarks, and Yves Lamothe, right, transition manager for the Ground Systems Development and Operations Program, the master of ceremonies. Berry served as the assistant secretary for education in the U.S. Department of Health, Education and Welfare HEW between 1977 and 1980. From 1980 to 2004, she was a member of the U.S. Commission on Civil Rights, serving as chair from 1993 to 2004. Among Berry's many honors are the NAACP's Roy Wilkins Award, the Rosa Parks Award of the Southern Christian Leadership Conference, and the Ebony Magazine Black Achievement Award. She is one of 75 women featured in the book "I Dream a World: Portraits of Black Women Who Changed America." Sienna College Research Institute and the Women's Hall of Fame also designated her one of "America's Women of the Century." The event was presented by Kennedy's Office of Diversity and Equal Opportunity. For more information about Kennedy Space Center, visit http://www.nasa.gov/kennedy. Photo credit: NASA/Kim Shiflett

Clark T. Sawin historical vignette: what do criminology, Harry Houdini, and King George V have in common with postpartum thyroid dysfunction?

PubMed

Smallridge, Robert C

2014-12-01

The history of postpartum thyroid dysfunction (PPTD) dates back almost two millennia, when Soranus of Ephesus, who practiced obstetrics and neonatology, observed swelling in the necks (presumably goiters) of women after pregnancy. The next reference to PPTD appeared in artwork more than 1000 years later, with many portraits illustrating women with goiter while holding infants. In the early to mid-19th century, Caleb Hillier Parry and Armand Trousseau described postpartum hyperthyroidism, while in the late 1800s, Sir Horatio Bryan Donkin reported the first patient with postpartum hypothyroidism. The modern era of PPTD began with the description in the late 1940s by H.E.W. Roberton of women after delivery reporting hypothyroid symptoms and responding to thyroid extract. The immunologic influence on PPTD was recognized initially by Parker and Beierwaltes in the early 1960s, and the clinical variability and natural history were carefully documented by numerous investigators in the 1970s-1980s. The past two decades have seen further refinements in understanding the prevalence, etiology, and treatment of PPTD. Yet to be determined is the role of screening as a cost-effective measure.

The PSRO hospital review system.

PubMed

Goran, M J; Roberts, J S; Kellogg, M A; Fielding, J; Jessee, W

1975-04-01

The 1972 Social Security amendments contained the landmark Professional Standards Review Organization (PSRO) provisions as well as several sections upgrading existing utilization review (UR) requirements under Medicare and Medicaid. With issuance of the PSRO Program Manual and the recent publication of the new UR regulations, HEW for the first time has brought Medicare and Medicaid hospital review requirements into conformity and made them compatible with and supportive of the PSRO program. This article defines the PSRO hospital review system, describes how the three major components-concurrent review, medical care evaluation studies, and profile analysis-interrelate and provides examples of each of these components. Under utilization review requirements or PSRO, hospitals will be required to implement an integrated system of review designed to assure appropriate utilization practices and improve the quality of care. These aims are to be accomplished through the application of concepts of peer review, the use of norms, criteria, and standards, the identification of deficiencies in the quality, administration, or appropriateness of health care services, and their correction through linkage with programs of continuing medical education. Although PSROs are initially responsible for review in hospitals, they will likely provide the locus for a community-wide system of peer review for all services provided under National Health Insurance.

Thin fused silica shells for high-resolution and large collecting area x-ray telescopes (like Lynx/XRS)

NASA Astrophysics Data System (ADS)

Civitani, M. M.; Hołyszko, J.; Vecchi, G.; Basso, S.; Citterio, O.; Ghigo, M.; Pareschi, G.; Parodi, G.; Incorvaia, S.

2017-09-01

The implementation of an X-ray mission with high imaging capabilities, similar to those achieved with Chandra (< 1 arc second Half Energy Width, HEW), but with a much larger throughput (2.5 m2 effective area @1 keV), represents a compelling request by the scientific community. To this end the Lynx/XRS mission is being studied in USA, with the participation of international partners. In order to figure out the challenging technological task of the mirror fabrication, different approaches are considered, based on monolithic and segmented shells. Starting from the experience done on the glass prototypal shell realized in the past years, the direct polishing of thin (2 mm thick) fused silica monolithic shells is being investigated as a possible solution. A temporary stiffening structure is designed to support the shell during the figuring and polishing operations and to manage the handling up to its integration in the telescope structure. After the grinding and the polishing phases, in order to achieve the required surface accuracy, a final ion beam figuring correction is foreseen. In this paper, we present the technological process and the results achieved so far on a prototypal shell under development.

FOREWORD: 9th Curtin University of Technology Science and Engineering International Conference 2014 (CUTSE2014)

NASA Astrophysics Data System (ADS)

Chieng Chen, Vincent Lee

2015-04-01

A very warm welcome to all participants of the 9th Curtin University Technology, Science and Engineering (CUTSE) Conference 2014. This annual conference dates back to 2006 when the first Curtin University of Technology Science and Engineering (CUTSE) Conference was held in Curtin University, Miri Sarawak. CUTSE Conference was initially intended for Curtin's undergraduates such that they are able to experience the presentation of their work in a conference environment. As time passes and following the urge of knowledge dissemination, CUTSE Conference is hence open to public. This year the Department of Mechanical Engineering has been given the honour to organize the 9th CUTSE Conference. It has been a pleasure to watch CUTSE grow from strength to strength over the years. This year, our theme is "Discovering, Innovating and Engineering". We hope that it is in this spirit that CUTSE participants may align their respective work, such that we all aim for a greater and better implementation of "Discovering, Innovating and Engineering". The 9th CUTSE Conference 2014 is an excellent avenue for researchers, engineers, scientists, academicians, professionals from industry and students to share their research findings and initiate further collaborations in their respective fields. Parallel sessions in Mechanical, Electrical, Computer, Civil and Chemical engineering as well as the sciences will be hosted over a period of two days. Each year, the conference attracts participation from a number of countries in addition to Malaysia and Australia. In addition, student participants will get the opportunity to present their research projects and gain valuable feedback from industry professionals. This year the Conference will be organised by the Department of Mechanical Engineering of Curtin Sarawak's School of Engineering and Science in collaboration with The Institute of Engineers Malaysia, Miri Branch. On behalf of the organizing committee, I would like to thank this year's sponsors and supporters. We appreciate your support for CUTSE 2014 and in research and development, and your foresight in nurturing cutting edge research into industrial applications. CUTSE 2014 would not be possible without the dedicated work and efforts of the organizing committee, who worked tirelessly in all aspects of the conference organization. I thank you for your hard work and commitment towards making CUTSE 2014 a success. Selamat Datai (Welcome) and enjoy the conference. Dr Vincent Lee Chieng Chen Organizing Chairperson, 9th CUTSE Conference 2014

The second law, Maxwell's demon, and work derivable from quantum heat engines.

PubMed

Kieu, Tien D

2004-10-01

With a class of quantum heat engines which consists of two-energy-eigenstate systems undergoing, respectively, quantum adiabatic processes and energy exchanges with heat baths at different stages of a cycle, we are able to clarify some important aspects of the second law of thermodynamics. The quantum heat engines also offer a practical way, as an alternative to Szilard's engine, to physically realize Maxwell's demon. While respecting the second law on the average, they are also capable of extracting more work from the heat baths than is otherwise possible in thermal equilibrium.

5. GENERAL VIEW OF UNITEDTOD TWIN TANDEM STEAM ENGINE. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. GENERAL VIEW OF UNITED-TOD TWIN TANDEM STEAM ENGINE. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

The path from geoscience to road engineering: experience in Russia and Norway

NASA Astrophysics Data System (ADS)

Kuznetsova, Elena

2017-04-01

In the presentation I would like to talk about my personal path from taking the education in geoscience in Russia to getting job as a researcher in road engineering in Norway. I completed my master and PhD at one of the best universities of Russia before getting job in Norway, first at the research institute and the university after. What I noticed was the main different is the role of woman in the research and management positions. I feel that I have more rights and more opportunities for my career in Norway than as it was back in Russia. Road engineering does not sound as very "feminine" specialization, however I have many female colleagues who are doing great job and enjoying their work. I made a lot of observations of my female and male colleagues when it comes to do the laboratory and field work, and to have leadership and management positions. Time to time I am in contact with some former bosses or colleagues from my university in Russia and I see the huge difference with how the communication goes with them and with my colleagues here, in Norway. Few words about myself. I am 31 and I am working as a researcher at the Norwegian university of science and technology. I have 5 years of working experience after obtaining my PhD. My primary background is engineering geology and geocryology. Last 4 years I am working in the field of road construction engineering and one of my main responsibilities is managing the large research project financed by the Norwegian Research Council. During my working life I found a lot of advantages to be a woman in a men world of engineering.

Analysis and experimental investigation of ceramic powder coating on aluminium piston

NASA Astrophysics Data System (ADS)

Pal, S.; Deore, A.; Choudhary, A.; Madhwani, V.; Vijapuri, D.

2017-11-01

Energy conservation and efficiency have always been the quest of engineers concerned with internal combustion engines. The diesel engine generally offers better fuel economy than its counterpart petrol engine. Even the diesel engine rejects about two thirds of the heat energy of the fuel, one-third to the coolant, and one third to the exhaust, leaving only about one-third as useful power output. Theoretically if the heat rejected could be reduced, then the thermal efficiency would be improved, at least up to the limit set by the second law of thermodynamics. Low Heat Rejection engines aim to do this by reducing the heat lost to the coolant. Thermal Barrier Coatings (TBCs) in diesel engines lead to advantages including higher power density, fuel efficiency, and multifuel capacity due to higher combustion chamber temperature. Using TBC can increase engine power by 8%, decrease the specific fuel consumption by 15-20% and increase the exhaust gas temperature by 200K. Although several systems have been used as TBC for different purposes, yttria stabilized zirconia with 7-8 wt.% yttria has received the most attention. Several factors playing important role in TBC life include thermal conductivity, thermo chemical stability at the service temperature, high thermo mechanical stability to the maximum service temperature and thermal expansion coefficient (TEC). This work mainly concentrates on the behaviour of three TBC powders under the same diesel engine conditions. This work finds out the best powder among yttria, alumina and zirconia to be used as a piston coating material i.e., the one resulting in lowest heat flux and low side skirt and bottom temperature has been chosen for the coating purpose. This work then analyses the coated sample for its surface properties such as hardness, roughness, corrosion resistance and microstructural study. This work aims at making it easier for the manufacturers choose the coating material for engine coating purposes and surface properties for operating them in their service period.

Defining, Developing and Assessing Global Competence in Engineers

ERIC Educational Resources Information Center

Lohmann, Jack R.; Rollins, Howard A.; Hoey, J. Joseph

2006-01-01

Engineering curricula are increasingly focused on developing student competencies. Many new competencies needed by engineers today are professional skills (sometimes called the "soft skills"). Among the new competencies for engineering graduates is global competence, the ability to work knowledgeably and live comfortably in a…

Cleaner, More Efficient Diesel Engines

ScienceCinema

Musculus, Mark

2018-01-16

Mark Musculus, an engine combustion scientist at Sandia National Laboratories, led a study that outlines the science base for auto and engine manufacturers to build the next generation of cleaner, more efficient engines using low-temperature combustion. Here, Musculus discusses the work at Sandia's Combustion Research Facility.

33 CFR 240.9 - Procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., sketches, and similar engineering data and information sufficient to permit analysis of the local proposal. (b) The District Engineer shall review the engineering adequacy of the local proposal and its... the Chief of Engineers to the Assistant Secretary of the Army (Civil Works) and provide information on...

33 CFR 240.9 - Procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., sketches, and similar engineering data and information sufficient to permit analysis of the local proposal. (b) The District Engineer shall review the engineering adequacy of the local proposal and its... the Chief of Engineers to the Assistant Secretary of the Army (Civil Works) and provide information on...

33 CFR 240.9 - Procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., sketches, and similar engineering data and information sufficient to permit analysis of the local proposal. (b) The District Engineer shall review the engineering adequacy of the local proposal and its... the Chief of Engineers to the Assistant Secretary of the Army (Civil Works) and provide information on...

33 CFR 240.9 - Procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., sketches, and similar engineering data and information sufficient to permit analysis of the local proposal. (b) The District Engineer shall review the engineering adequacy of the local proposal and its... the Chief of Engineers to the Assistant Secretary of the Army (Civil Works) and provide information on...

A Resident Engineer.

ERIC Educational Resources Information Center

Chapman, Gary T.

This paper examines the work of resident engineers in a university setting. The need for engineers with industrial experience is established, and the benefits of using resident engineers in training programs are cited. Attributes and problems associated with the practice are studied from the viewpoints of industry, government, universities, and…

ENGINEERING MANPOWER BULLETIN NUMBER 9.

ERIC Educational Resources Information Center

ALDEN, JOHN D.

DESIGNED TO INFORM LEADERS IN INDUSTRY, GOVERNMENT, AND EDUCATION, WHOSE RESPONSIBILITY INCLUDES AWARENESS OF ENGINEERING MANPOWER DEVELOPMENTS, THIS BULLETIN REPORTS A STUDY CONDUCTED BY THE ENGINEERING MANPOWER COMMISSION OF ENGINEERS IN THE ARMED SERVICES. THE WORK OF THE COMMISSION IS TO ASSURE THE MOST EFFECTIVE UTILIZATION OF ENGINEERING…

33 CFR 240.9 - Procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., sketches, and similar engineering data and information sufficient to permit analysis of the local proposal. (b) The District Engineer shall review the engineering adequacy of the local proposal and its... the Chief of Engineers to the Assistant Secretary of the Army (Civil Works) and provide information on...

New Perspectives: Technology Teacher Education and Engineering Design

ERIC Educational Resources Information Center

Hill, Roger B.

2006-01-01

Initiatives to integrate engineering design within the field of technology education are increasingly evident. The National Science Foundation has encouraged and funded opportunities for technology educators and engineers to work collaboratively. However, perspectives regarding the role engineering should play within the discipline of technology…

An Online Graduate Requirements Engineering Course

ERIC Educational Resources Information Center

Kilicay-Ergin, N.; Laplante, P. A.

2013-01-01

Requirements engineering is one of the fundamental knowledge areas in software and systems engineering graduate curricula. Recent changes in educational delivery and student demographics have created new challenges for requirements engineering education. In particular, there is an increasing demand for online education for working professionals.…

10. DETAIL OF UNITEDTOD TWINTANDEM STEAM ENGINE, AS SEEN FROM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. DETAIL OF UNITED-TOD TWIN-TANDEM STEAM ENGINE, AS SEEN FROM HIGH-PRESSURE SIDE OF ENGINE (SPARE CRANK WAS KEPT AT THIS END) - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

7. DETAIL OF UNITEDTOD TWINTANDEM STEAM ENGINE, SHOWING CYLINDER AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. DETAIL OF UNITED-TOD TWIN-TANDEM STEAM ENGINE, SHOWING CYLINDER AND CROSS HEAD OF PISTON AT THE LOW PRESSURE SIDE OF ENGINE. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

8. DETAIL OF UNITEDTOD TWINTANDEM STEAM ENGINE, SHOWING CYLINDER AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. DETAIL OF UNITED-TOD TWIN-TANDEM STEAM ENGINE, SHOWING CYLINDER AND CROSS HEAD OF PISTON AT THE HIGH-PRESSURE SIDE OF ENGINE. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

Development of an integrated indicator system to assess the impacts of reclamation engineering on a river estuary.

PubMed

Xu, Yan; Cai, Yanpeng; Sun, Tao; Yin, Xin'An; Tan, Qian

2017-06-30

An integrated indicator system was developed for determining synthetic environmental responses under multiple types of coastal reclamation engineering in the Yellow River estuary, China. Four types of coastal engineering works were analyzed, namely port construction, petroleum exploitation, fishery and aquaculture, and seawall defense. In addition, two areas with limited human disturbances were considered for comparison. From the weights of the response value for each indicator, port construction was determined to be the primary impact contributor among the four engineering works studies. Specifically, hydrodynamic conditions, ecological status, economic costs, and engineering intensity were on average 72.78%, 65.03%, 75.03%, and 66.35% higher than those of other engineering types. Furthermore, fishery and aquaculture impact on water quality was 42.51% higher than that of other engineering types, whereas seawall defense impact on landscape variation was 51.75% higher than that of other engineering types. The proposed indicator system may provide effective coastal management in future. Copyright © 2017 Elsevier Ltd. All rights reserved.

Heavy-Duty Stoichiometric Compression Ignition Engine with Improved Fuel Economy over Alternative Technologies for Meeting 2010 On-Highway Emission

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kirby J. Baumgard; Richard E. Winsor

2009-12-31

The objectives of the reported work were: to apply the stoichiometric compression ignition (SCI) concept to a 9.0 liter diesel engine; to obtain engine-out NO{sub x} and PM exhaust emissions so that the engine can meet 2010 on-highway emission standards by applying a three-way catalyst for NO{sub x} control and a particulate filter for PM control; and to simulate an optimize the engine and air system to approach 50% thermal efficiency using variable valve actuation and electric turbo compounding. The work demonstrated that an advanced diesel engine can be operated at stoichiometric conditions with reasonable particulate and NOx emissions atmore » full power and peak torque conditions; calculated that the SCI engine will operate at 42% brake thermal efficiency without advanced hardware, turbocompounding, or waste heat recovery; and determined that EGR is not necessary for this advanced concept engine, and this greatly simplifies the concept.« less

Job stress models, depressive disorders and work performance of engineers in microelectronics industry.

PubMed

Chen, Sung-Wei; Wang, Po-Chuan; Hsin, Ping-Lung; Oates, Anthony; Sun, I-Wen; Liu, Shen-Ing

2011-01-01

Microelectronic engineers are considered valuable human capital contributing significantly toward economic development, but they may encounter stressful work conditions in the context of a globalized industry. The study aims at identifying risk factors of depressive disorders primarily based on job stress models, the Demand-Control-Support and Effort-Reward Imbalance models, and at evaluating whether depressive disorders impair work performance in microelectronics engineers in Taiwan. The case-control study was conducted among 678 microelectronics engineers, 452 controls and 226 cases with depressive disorders which were defined by a score 17 or more on the Beck Depression Inventory and a psychiatrist's diagnosis. The self-administered questionnaires included the Job Content Questionnaire, Effort-Reward Imbalance Questionnaire, demography, psychosocial factors, health behaviors and work performance. Hierarchical logistic regression was applied to identify risk factors of depressive disorders. Multivariate linear regressions were used to determine factors affecting work performance. By hierarchical logistic regression, risk factors of depressive disorders are high demands, low work social support, high effort/reward ratio and low frequency of physical exercise. Combining the two job stress models may have better predictive power for depressive disorders than adopting either model alone. Three multivariate linear regressions provide similar results indicating that depressive disorders are associated with impaired work performance in terms of absence, role limitation and social functioning limitation. The results may provide insight into the applicability of job stress models in a globalized high-tech industry considerably focused in non-Western countries, and the design of workplace preventive strategies for depressive disorders in Asian electronics engineering population.

15. INTERIOR OF ENGINE ROOM, CONTAINING MESTACORLISS CROSSCOMPOUND ENGINE, FOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. INTERIOR OF ENGINE ROOM, CONTAINING MESTA-CORLISS CROSS-COMPOUND ENGINE, FOR 40" BLOOMING MILL. THIS VIEW IS TAKEN FROM THE HIGH-PRESSURE SIDE OF THE ENGINE SHOWING THE HOUSING EXTENSION; TO THE RIGHT, IN THE BACKGROUND, IS THE 24' CAST-IRON FLYWHEEL. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

Aircraft Engine Emissions. [conference

NASA Technical Reports Server (NTRS)

1977-01-01

A conference on a aircraft engine emissions was held to present the results of recent and current work. Such diverse areas as components, controls, energy efficient engine designs, and noise and pollution reduction are discussed.

Decision Support System Requirements Definition for Human Extravehicular Activity Based on Cognitive Work Analysis

PubMed Central

Miller, Matthew James; McGuire, Kerry M.; Feigh, Karen M.

2016-01-01

The design and adoption of decision support systems within complex work domains is a challenge for cognitive systems engineering (CSE) practitioners, particularly at the onset of project development. This article presents an example of applying CSE techniques to derive design requirements compatible with traditional systems engineering to guide decision support system development. Specifically, it demonstrates the requirements derivation process based on cognitive work analysis for a subset of human spaceflight operations known as extravehicular activity. The results are presented in two phases. First, a work domain analysis revealed a comprehensive set of work functions and constraints that exist in the extravehicular activity work domain. Second, a control task analysis was performed on a subset of the work functions identified by the work domain analysis to articulate the translation of subject matter states of knowledge to high-level decision support system requirements. This work emphasizes an incremental requirements specification process as a critical component of CSE analyses to better situate CSE perspectives within the early phases of traditional systems engineering design. PMID:28491008

Decision Support System Requirements Definition for Human Extravehicular Activity Based on Cognitive Work Analysis.

PubMed

Miller, Matthew James; McGuire, Kerry M; Feigh, Karen M

2017-06-01

The design and adoption of decision support systems within complex work domains is a challenge for cognitive systems engineering (CSE) practitioners, particularly at the onset of project development. This article presents an example of applying CSE techniques to derive design requirements compatible with traditional systems engineering to guide decision support system development. Specifically, it demonstrates the requirements derivation process based on cognitive work analysis for a subset of human spaceflight operations known as extravehicular activity . The results are presented in two phases. First, a work domain analysis revealed a comprehensive set of work functions and constraints that exist in the extravehicular activity work domain. Second, a control task analysis was performed on a subset of the work functions identified by the work domain analysis to articulate the translation of subject matter states of knowledge to high-level decision support system requirements. This work emphasizes an incremental requirements specification process as a critical component of CSE analyses to better situate CSE perspectives within the early phases of traditional systems engineering design.

Work production of quantum rotor engines

NASA Astrophysics Data System (ADS)

Seah, Stella; Nimmrichter, Stefan; Scarani, Valerio

2018-04-01

We study the mechanical performance of quantum rotor heat engines in terms of common notions of work using two prototypical models: a mill driven by the heat flow from a hot to a cold mode, and a piston driven by the alternate heating and cooling of a single working mode. We evaluate the extractable work in terms of ergotropy, the kinetic energy associated to net directed rotation, as well as the intrinsic work based on the exerted torque under autonomous operation, and we compare them to the energy output for the case of an external dissipative load and for externally driven engine cycles. Our results connect work definitions from both physical and information-theoretical perspectives. In particular, we find that apart from signatures of angular momentum quantization, the ergotropy is consistent with the intuitive notion of work in the form of net directed motion. It also agrees with the energy output to an external load or agent under optimal conditions. This sets forth a consistent thermodynamical description of rotating quantum motors, flywheels, and clocks.

Ultra-efficient Engine Diameter Study

NASA Technical Reports Server (NTRS)

Daggett, David L.; Brown, Stephen T.; Kawai, Ron T.

2003-01-01

Engine fan diameter and Bypass Ratio (BPR) optimization studies have been conducted since the beginning of the turbofan age with the recognition that reducing the engine core jet velocity and increasing fan mass flow rate generally increases propulsive efficiency. However, performance tradeoffs limit the amount of fan flow achievable without reducing airplane efficiency. This study identifies the optimum engine fan diameter and BPR, given the advanced Ultra-Efficient Engine Technology (UEET) powerplant efficiencies, for use on an advanced subsonic airframe. Engine diameter studies have historically focused on specific engine size options, and were limited by existing technology and transportation infrastructure (e.g., ability to fit bare engines through aircraft doors and into cargo holds). This study is unique in defining the optimum fan diameter and drivers for future 2015 (UEET) powerplants while not limiting engine fan diameter by external constraints. This report follows on to a study identifying the system integration issues of UEET engines. This Engine Diameter study was managed by Boeing Phantom Works, Seattle, Washington through the NASA Glenn Revolutionary Aero Space Engine Research (RASER) contract under task order 10. Boeing Phantom Works, Huntington Beach, completed the engine/airplane sizing optimization, while the Boeing Commercial Airplane group (BCA) provided design oversight. A separate subcontract to support the overall project was issued to Tuskegee University.

Education of biomedical engineering in Taiwan.

PubMed

Lin, Kang-Ping; Kao, Tsair; Wang, Jia-Jung; Chen, Mei-Jung; Su, Fong-Chin

2014-01-01

Biomedical Engineers (BME) play an important role in medical and healthcare society. Well educational programs are important to support the healthcare systems including hospitals, long term care organizations, manufacture industries of medical devices/instrumentations/systems, and sales/services companies of medical devices/instrumentations/system. In past 30 more years, biomedical engineering society has accumulated thousands people hold a biomedical engineering degree, and work as a biomedical engineer in Taiwan. Most of BME students can be trained in biomedical engineering departments with at least one of specialties in bioelectronics, bio-information, biomaterials or biomechanics. Students are required to have internship trainings in related institutions out of campus for 320 hours before graduating. Almost all the biomedical engineering departments are certified by IEET (Institute of Engineering Education Taiwan), and met the IEET requirement in which required mathematics and fundamental engineering courses. For BMEs after graduation, Taiwanese Society of Biomedical Engineering (TSBME) provides many continue-learning programs and certificates for all members who expect to hold the certification as a professional credit in his working place. In current status, many engineering departments in university are continuously asked to provide joint programs with BME department to train much better quality students. BME is one of growing fields in Taiwan.

Services supporting collaborative alignment of engineering networks

NASA Astrophysics Data System (ADS)

Jansson, Kim; Uoti, Mikko; Karvonen, Iris

2015-08-01

Large-scale facilities such as power plants, process factories, ships and communication infrastructures are often engineered and delivered through geographically distributed operations. The competencies required are usually distributed across several contributing organisations. In these complicated projects, it is of key importance that all partners work coherently towards a common goal. VTT and a number of industrial organisations in the marine sector have participated in a national collaborative research programme addressing these needs. The main output of this programme was development of the Innovation and Engineering Maturity Model for Marine-Industry Networks. The recently completed European Union Framework Programme 7 project COIN developed innovative solutions and software services for enterprise collaboration and enterprise interoperability. One area of focus in that work was services for collaborative project management. This article first addresses a number of central underlying research themes and previous research results that have influenced the development work mentioned above. This article presents two approaches for the development of services that support distributed engineering work. Experience from use of the services is analysed, and potential for development is identified. This article concludes with a proposal for consolidation of the two above-mentioned methodologies. This article outlines the characteristics and requirements of future services supporting collaborative alignment of engineering networks.

Site systems engineering fiscal year 1999 multi-year work plan (MYWP) update for WBS 1.8.2.2

DOE Office of Scientific and Technical Information (OSTI.GOV)

GRYGIEL, M.L.

1998-10-08

Manage the Site Systems Engineering process to provide a traceable integrated requirements-driven, and technically defensible baseline. Through the Site Integration Group(SIG), Systems Engineering ensures integration of technical activities across all site projects. Systems Engineering's primary interfaces are with the RL Project Managers, the Project Direction Office and with the Project Major Subcontractors, as well as with the Site Planning organization. Systems Implementation: (1) Develops, maintains, and controls the site integrated technical baseline, ensures the Systems Engineering interfaces between projects are documented, and maintain the Site Environmental Management Specification. (2) Develops and uses dynamic simulation models for verification of the baselinemore » and analysis of alternatives. (3) Performs and documents fictional and requirements analyses. (4) Works with projects, technology management, and the SIG to identify and resolve technical issues. (5) Supports technical baseline information for the planning and budgeting of the Accelerated Cleanup Plan, Multi-Year Work Plans, Project Baseline Summaries as well as performance measure reporting. (6) Works with projects to ensure the quality of data in the technical baseline. (7) Develops, maintains and implements the site configuration management system.« less

High-speed engine/component performance assessment using exergy and thrust-based methods

NASA Technical Reports Server (NTRS)

Riggins, D. W.

1996-01-01

This investigation summarizes a comparative study of two high-speed engine performance assessment techniques based on energy (available work) and thrust-potential (thrust availability). Simple flow-fields utilizing Rayleigh heat addition and one-dimensional flow with friction are used to demonstrate the fundamental inability of conventional energy techniques to predict engine component performance, aid in component design, or accurately assess flow losses. The use of the thrust-based method on these same examples demonstrates its ability to yield useful information in all these categories. Energy and thrust are related and discussed from the stand-point of their fundamental thermodynamic and fluid dynamic definitions in order to explain the differences in information obtained using the two methods. The conventional definition of energy is shown to include work which is inherently unavailable to an aerospace Brayton engine. An engine-based energy is then developed which accurately accounts for this inherently unavailable work; performance parameters based on this quantity are then shown to yield design and loss information equivalent to the thrust-based method.

Initial comparison of single cylinder Stirling engine computer model predictions with test results

NASA Technical Reports Server (NTRS)

Tew, R. C., Jr.; Thieme, L. G.; Miao, D.

1979-01-01

A NASA developed digital computer code for a Stirling engine, modelling the performance of a single cylinder rhombic drive ground performance unit (GPU), is presented and its predictions are compared to test results. The GPU engine incorporates eight regenerator/cooler units and the engine working space is modelled by thirteen control volumes. The model calculates indicated power and efficiency for a given engine speed, mean pressure, heater and expansion space metal temperatures and cooler water inlet temperature and flow rate. Comparison of predicted and observed powers implies that the reference pressure drop calculations underestimate actual pressure drop, possibly due to oil contamination in the regenerator/cooler units, methane contamination in the working gas or the underestimation of mechanical loss. For a working gas of hydrogen, the predicted values of brake power are from 0 to 6% higher than experimental values, and brake efficiency is 6 to 16% higher, while for helium the predicted brake power and efficiency are 2 to 15% higher than the experimental.

Experimental study of quasi-periodic on-off phenomena in a small-scale traveling wave thermoacoustic heat engine

NASA Astrophysics Data System (ADS)

Chen, M.; Ju, Y. L.

2017-07-01

Periodic and spontaneous on-off oscillation belongs to the onset and damping behaviors of thermoacoustic engines, and investigations on this phenomenon lead to better operation of the thermoacoustic engines with stable performances. In this paper, the quasi- periodic on-off oscillation in a small-scale traveling wave thermoacoustic heat engine with a resonator length of only 1 m was experimentally investigated. The type of working media, mean pressure and the input heating power are the main operating parameters, which significantly affect the formation of the periodic on-off oscillation. The experimental results demonstrated there was a critical charge pressure over which the periodic on-off oscillation could happen. For the small- scale engine with helium gas as the working media, the mean pressure threshold value was about 1.4 MPa and the on-off oscillation occurred with a single frequency. Using nitrogen and argon gas as the working media, the on-off oscillation was not observed. The reason was qualitatively analyzed as well.

33 CFR 276.7 - Procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... will include full description of planned work, plans, sketches, and similar engineering data and... engineering adequacy of the local proposal and its relation to the possible selected Federal Plan and... Engineers—of the Assistant Secretary of the Army (Civil Works) by forwarding a copy of the draft survey...

33 CFR 276.7 - Procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... will include full description of planned work, plans, sketches, and similar engineering data and... engineering adequacy of the local proposal and its relation to the possible selected Federal Plan and... Engineers—of the Assistant Secretary of the Army (Civil Works) by forwarding a copy of the draft survey...

33 CFR 276.7 - Procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... will include full description of planned work, plans, sketches, and similar engineering data and... engineering adequacy of the local proposal and its relation to the possible selected Federal Plan and... Engineers—of the Assistant Secretary of the Army (Civil Works) by forwarding a copy of the draft survey...

33 CFR 276.7 - Procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... will include full description of planned work, plans, sketches, and similar engineering data and... engineering adequacy of the local proposal and its relation to the possible selected Federal Plan and... Engineers—of the Assistant Secretary of the Army (Civil Works) by forwarding a copy of the draft survey...

33 CFR 276.7 - Procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... will include full description of planned work, plans, sketches, and similar engineering data and... engineering adequacy of the local proposal and its relation to the possible selected Federal Plan and... Engineers—of the Assistant Secretary of the Army (Civil Works) by forwarding a copy of the draft survey...

78 FR 24207 - Request for Information About Diethanolamine (CAS No. 111-42-2)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-24

.... engineering controls, work practices, personal protective equipment, exposure data before and after... agent in agricultural chemicals, a corrosion inhibitor and wetting agent in metalworking fluids. The...., engineering controls, work practices, PPE) being taken to minimize worker exposure to diethanolamine. (8...

[Sociohygienic monitoring of the working conditions of workers at an aircraft engine factory].

PubMed

Usatov, A N; Demchenko, V G; Rod'kin, V P

2011-01-01

The authors have improved, modified, and introduced a sociohygienic monitoring model proposed by Yu. V. Erofeyev, V. V. Dalmatov, and D. V. Turchaninov (2007) in the P. I. Baranov engine association and proposed objective criteria for evaluating the work space.

78 FR 37818 - Request for Information on Toluene Diisocyanates

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-24

.... engineering controls, work practices, personal protective equipment, exposure data before and after... Conference of Governmental Industrial Hygienists (ACGIH) threshold limit value (TLV) for TDI is 0.005 ppm... vitro and in vivo studies. (7) Information on control measures (e.g., engineering controls, work...

29 CFR 1990.146 - Issues to be considered in the rulemaking.

Code of Federal Regulations, 2010 CFR

2010-07-01

... of substances subject to the rulemaking meets the definition of a potential occupational carcinogen... engineering and work practice controls including technological and economic considerations. (j) The... engineering and work practice controls and other issues relevant to substitution; and (l) Whether the...

Overview of heat transfer and fluid flow problem areas encountered in Stirling engine modeling

NASA Technical Reports Server (NTRS)

Tew, Roy C., Jr.

1988-01-01

NASA Lewis Research Center has been managing Stirling engine development programs for over a decade. In addition to contractual programs, this work has included in-house engine testing and development of engine computer models. Attempts to validate Stirling engine computer models with test data have demonstrated that engine thermodynamic losses need better characterization. Various Stirling engine thermodynamic losses and efforts that are underway to characterize these losses are discussed.

Development of the Junkers-diesel Aircraft Engine

NASA Technical Reports Server (NTRS)

Gasterstadt,

1930-01-01

The working process of the Junkers engine has resulted from a series of attempts to attain high performance and to control the necessarily rapid and complete combustion at extremely high speeds. The two main problems of Diesel engines in aircraft are addressed; namely, incomplete combustion and the greater weight of Diesel engine parts compared to gasoline engines.

Retrospective Perceptions and Views of Engineering Students about Physics and Engineering Practicals

ERIC Educational Resources Information Center

Bhathal, R.

2011-01-01

Hands-on practical work in physics and engineering has a long and well-established tradition in Australian universities. Recently, however, the question of whether hands-on physics and engineering practicals are useful for engineering students and whether they could be deleted or whether these could be replaced with computer simulations has been…

Engineering Employment Characteristics. Engineering Education and Practice in the United States.

ERIC Educational Resources Information Center

National Academy of Sciences - National Research Council, Washington, DC. Commission on Engineering and Technical Systems.

This panel report was prepared as part of the study of engineering education and practice conducted under the guidance of the National Research Council's Committee on the Education and Utilization of the Engineer. The panel's goal was to provide a data base that describes the engineering work force, its main activities, capabilities, and principal…

You're a What? Usability Engineer.

ERIC Educational Resources Information Center

Crosby, Olivia

2001-01-01

Describes the work of usability engineers, who improve computer hardware, software, and websites by focusing on how users perceive and manipulate those tools. Discusses education, training, salaries, and talents needed by usability engineers. (Author/JOW)

Millennials at Work: The Advice of Great Leaders

DTIC Science & Technology

2015-04-01

Millennials at Work The Advice of Great Leaders Carol Axten Axten has more than 30 years of experience in Defense Department engineering, program...management, and policy development. She has graduate degrees in business , engineering, international relations, and national security resource strategy...million members of the millennial generation will enter the workforce and by 2030 will make up 75 percent of all working professionals. As managers in the

Engineering a Cause and Cure to Climate Change; Working a culture change with our Future Engineers.

NASA Astrophysics Data System (ADS)

Hudier, E. J. J.

2014-12-01

Where scientist unravel the laws of nature giving the human race the means to remodel their environment, engineers are the tools that put together the very technologies that give humans this power. Early on, along our first steps through this industrialization era, development was the key word, nature could digest our waste products no matter what. We have managed to tamper with our atmosphere's gas composition and the climate is slowly remodelling our way of life. Engineers are now expected to be a key part of the solution. Engineering programs have evolved to include new dimensions such as ethics, communication and environment. We want future engineers to put these dimensions first while working on new machine designs, concepts and procedures. As undergraduate students with a deep science background we also want them to be a source of information for their co-workers and more. How well are we getting through? How good teachers our future engineers will be? This work take a look at the teaching/learning successes comparing engineering students with students attending an undergraduate program in biology. Methods emphasizing the acquisition of knowledge through lectures and reading assignments are tested along with activities aiming at unraveling the scientific fundamental behind environmental issues and putting forward original solutions to specific problematic. Concept knowledge scores, communications' quality and activities evaluations by students are discussed.

Teaching Teachers to Teach Green Engineering

ERIC Educational Resources Information Center

Flynn, Ann Marie; Naraghi, Mohammad H.; Austin, Nicole; Helak, Sean; Manzer, Jarrod

2006-01-01

The work provides guidelines for instructors who wish to incorporate green engineering concepts into a typical non-green engineering course without diluting course content or modifying the course syllabus by identifying 5 critical elements necessary to the successful integration of green engineering concepts into any traditional, design-oriented,…

Student Self-Selection for Specializations in Engineering.

ERIC Educational Resources Information Center

Izraeli, Dafna; And Others

1979-01-01

Tests the hypothesis that students self-selecting themselves for different occupational fields differ in relevant values and interests. Industrial engineers have different work values and images of their subfield than other engineering specialists. In terms of type of student selecting engineering, the profession cannot be treated as an…

33 CFR 211.108 - Determination of price.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Section 211.108 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE REAL ESTATE ACTIVITIES OF THE CORPS OF ENGINEERS IN CONNECTION WITH CIVIL WORKS PROJECTS... application from a former owner, the Chief of Engineers and/or the appropriate District Engineer is hereby...