Epifaunal Community Development on Great Lakes Breakwaters: An Engineering with Nature Demonstration Project

DTIC Science & Technology

2014-08-01

major taxonomic group and counted. The algae from each sample was captured on a preweighed paper filter and dried in an oven at 60-65° C for 24-48...Restoration Initiative managed by the Great Lakes National Program Office. BACKGROUND Engineering With Nature Approach. Engineering With Nature (EWN) is a ...person shall be subject to a penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number

Huyghens Engines--a new concept and its embodiment for nano-micro interlevel information processing.

PubMed

Santoli, Salvatore

2009-02-01

Current criteria in Bionanotechnology based on software and sensor/actuator hardware of Artificial Intelligence for bioinspired nanostructured systems lack the nanophysical background and key mathematics to describe and mimick the biological hierarchies of nano-to-micro-integrated informational/energetic levels. It is argued that bionanoscale hardware/software undividable solidarity can be mimicked by artificial nanostructured systems featuring intra/interlevel information processing through the emerging organization principle of quantum holography, described by the Heisenberg group G and by harmonic analysis on G. From a property of G as a Lie group, quantum holography is shown to merge the quantum/classical dynamic-symbolic ongoings into the structure-function unity of biological sensing-information processing-actuating, while by Ch. Huyghens' principles about wave motion and coupled oscillators synchronization it applies to environmental waves of any kind, so embodying a universal information processing engine, dubbed Huyghens Engine, that mimicks the holistic nanobiological structure-function solidarity and the kinetics/thermodynamics of nano/micro interface information transfer.

Handbook for aquaculture water quality

USDA-ARS?s Scientific Manuscript database

Efficient aquaculture production depends upon maintaining acceptable water quality conditions in culture units. This handbook discusses background information from chemistry, physics, biology, and engineering necessary for understanding the principles of water quality management in aquaculture. It a...

Annual Data Summary for 1986 CERC (Coastal Engineering Research Center) Field Research Facility. Volume 1. Main Text and Appendix A

DTIC Science & Technology

1988-08-01

Waterways Experiment Station, Corps of Engineers PO Box 631, Vicksburg, Mississippi 39180-0631 DTI ~;~c~v ~ jAUG 291988 : H Ke August 1988 Final Report...PART I: INTRODUCTION ................................................ 3 Background ........................................................ 3...Information Service, 5285 Port Royal Road, Springfield, VA. 22161. 2 ANNUAL DATA SUMMARY FOR 1986 CERC FIELD RESEARCH FACILITY PART I: INTRODUCTION

Incorporating comparative genomics into the design-test-learn cycle of microbial strain engineering.

PubMed

Sardi, Maria; Gasch, Audrey P

2017-08-01

Engineering microbes with new properties is an important goal in industrial engineering, to establish biological factories for production of biofuels, commodity chemicals and pharmaceutics. But engineering microbes to produce new compounds with high yield remains a major challenge toward economically viable production. Incorporating several modern approaches, including synthetic and systems biology, metabolic modeling and regulatory rewiring, has proven to significantly advance industrial strain engineering. This review highlights how comparative genomics can also facilitate strain engineering, by identifying novel genes and pathways, regulatory mechanisms and genetic background effects for engineering. We discuss how incorporating comparative genomics into the design-test-learn cycle of strain engineering can provide novel information that complements other engineering strategies. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Concentrating Solar Power Projects - Maricopa Solar Project | Concentrating

Science.gov Websites

Turbine Capacity: Net: 1.5 MW Gross: 1.5 MW Status: Currently Non-Operational Start Year: 2010 Do you have more information, corrections, or comments? Background Technology: Dish/Engine Status: Currently Non

ChE at the Erevan Polytechnic Institute Soviet Armenia.

ERIC Educational Resources Information Center

Hanesian, Deran

1984-01-01

Provides background information on Soviet Armenia and the Erevan Polytechnic Institute (EPI) located in this republic of the USSR. Also provides a description of chemical engineering programs and courses and faculty at the EPI. (JN)

Summer 2014 Pathways Report

NASA Technical Reports Server (NTRS)

Hand, Zachary

2014-01-01

Over the summer I had the exciting opportunity to work for NASA at the Kennedy Space Center as a Mission Assurance Engineering intern. When I was offered a position in mission assurance for the Safety and Mission Assurance directorate's Launch Services Division, I didn't really know what I would be doing, but I knew it would be an excellent opportunity to learn and grow professionally. In this report I will provide some background information on the Launch Services Division, as well as detail my duties and accomplishments during my time as an intern. Additionally, I will relate the significance of my work experience to my current academic work and future career goals. This report contains background information on Mission Assurance Engineering, a description of my duties and accomplishments over the summer of 2014, and relates the significance of my work experience to my school work and future career goals. It is a required document for the Pathways program.

Will They Report It? Ethical Attitude of Graduate Software Engineers in Reporting Bad News

ERIC Educational Resources Information Center

Sajeev, A. S. M.; Crnkovic, Ivica

2012-01-01

Hiding critical information has resulted in disastrous failures of some major software projects. This paper investigates, using a subset of Keil's test, how graduates (70% of them with work experience) from different cultural backgrounds who are enrolled in a postgraduate course on global software development would handle negative information that…

Some Thoughts About Water Analysis in Shipboard Steam Propulsion Systems for Marine Engineering Students.

ERIC Educational Resources Information Center

Schlenker, Richard M.; And Others

Information is presented about the problems involved in using sea water in the steam propulsion systems of large, modern ships. Discussions supply background chemical information concerning the problems of corrosion, scale buildup, and sludge production. Suggestions are given for ways to maintain a good water treatment program to effectively deal…

Magnetohydrodynamics (MHD) Engineering Test Facility (ETF) 200 MWe power plant. Conceptual Design Engineering Report (CDER). Volume 4: Supplementary engineering data

NASA Astrophysics Data System (ADS)

1981-09-01

The reference conceptual design of the Magnetohydrodynamic Engineering Test Facility (ETF), a prototype 200 MWe coal-fired electric generating plant designed to demonstrate the commercial feasibility of open cycle MHD is summarized. Main elements of the design are identified and explained, and the rationale behind them is reviewed. Major systems and plant facilities are listed and discussed. Construction cost and schedule estimates, and identification of engineering issues that should be reexamined are also given. The latest (1980-1981) information from the MHD technology program are integrated with the elements of a conventional steam power electric generating plant. Supplementary Engineering Data (Issues, Background, Performance Assurance Plan, Design Details, System Design Descriptions and Related Drawings) is presented.

Magnetohydrodynamics (MHD) Engineering Test Facility (ETF) 200 MWe power plant. Conceptual Design Engineering Report (CDER). Volume 4: Supplementary engineering data

NASA Technical Reports Server (NTRS)

1981-01-01

The reference conceptual design of the Magnetohydrodynamic Engineering Test Facility (ETF), a prototype 200 MWe coal-fired electric generating plant designed to demonstrate the commercial feasibility of open cycle MHD is summarized. Main elements of the design are identified and explained, and the rationale behind them is reviewed. Major systems and plant facilities are listed and discussed. Construction cost and schedule estimates, and identification of engineering issues that should be reexamined are also given. The latest (1980-1981) information from the MHD technology program are integrated with the elements of a conventional steam power electric generating plant. Supplementary Engineering Data (Issues, Background, Performance Assurance Plan, Design Details, System Design Descriptions and Related Drawings) is presented.

Ocean Instruments Web Site for Undergraduate, Secondary and Informal Education

NASA Astrophysics Data System (ADS)

Farrington, J. W.; Nevala, A.; Dolby, L. A.

2004-12-01

An Ocean Instruments web site has been developed that makes available information about ocean sampling and measurement instruments and platforms. The site features text, pictures, diagrams and background information written or edited by experts in ocean science and engineering and contains links to glossaries and multimedia technologies including video streaming, audio packages, and searchable databases. The site was developed after advisory meetings with selected professors teaching undergraduate classes who responded to the question, what could Woods Hole Oceanographic Institution supply to enhance undergraduate education in ocean sciences, life sciences, and geosciences? Prototypes were developed and tested with students, potential users, and potential contributors. The site is hosted by WHOI. The initial five instruments featured were provided by four WHOI scientists and engineers and by one Sea Education Association faculty member. The site is now open to contributions from scientists and engineers worldwide. The site will not advertise or promote the use of individual ocean instruments.

METAL ATTENUATION PROCESSES AT MINING SITES

EPA Science Inventory

The purpose of this Issue Paper is to provide scientists and engineers responsible for assessing remediation technologies with background information on MNA processes at mining-impacted sites. The global magnitude of the acid drainage problem is clear evidence that in most cases...

Evaluation of Quality and Readability of Health Information Websites Identified through India's Major Search Engines.

PubMed

Raj, S; Sharma, V L; Singh, A J; Goel, S

2016-01-01

Background. The available health information on websites should be reliable and accurate in order to make informed decisions by community. This study was done to assess the quality and readability of health information websites on World Wide Web in India. Methods. This cross-sectional study was carried out in June 2014. The key words "Health" and "Information" were used on search engines "Google" and "Yahoo." Out of 50 websites (25 from each search engines), after exclusion, 32 websites were evaluated. LIDA tool was used to assess the quality whereas the readability was assessed using Flesch Reading Ease Score (FRES), Flesch-Kincaid Grade Level (FKGL), and SMOG. Results. Forty percent of websites (n = 13) were sponsored by government. Health On the Net Code of Conduct (HONcode) certification was present on 50% (n = 16) of websites. The mean LIDA score (74.31) was average. Only 3 websites scored high on LIDA score. Only five had readability scores at recommended sixth-grade level. Conclusion. Most health information websites had average quality especially in terms of usability and reliability and were written at high readability levels. Efforts are needed to develop the health information websites which can help general population in informed decision making.

Using Internet Search Engines to Obtain Medical Information: A Comparative Study

PubMed Central

Wang, Liupu; Wang, Juexin; Wang, Michael; Li, Yong; Liang, Yanchun

2012-01-01

Background The Internet has become one of the most important means to obtain health and medical information. It is often the first step in checking for basic information about a disease and its treatment. The search results are often useful to general users. Various search engines such as Google, Yahoo!, Bing, and Ask.com can play an important role in obtaining medical information for both medical professionals and lay people. However, the usability and effectiveness of various search engines for medical information have not been comprehensively compared and evaluated. Objective To compare major Internet search engines in their usability of obtaining medical and health information. Methods We applied usability testing as a software engineering technique and a standard industry practice to compare the four major search engines (Google, Yahoo!, Bing, and Ask.com) in obtaining health and medical information. For this purpose, we searched the keyword breast cancer in Google, Yahoo!, Bing, and Ask.com and saved the results of the top 200 links from each search engine. We combined nonredundant links from the four search engines and gave them to volunteer users in an alphabetical order. The volunteer users evaluated the websites and scored each website from 0 to 10 (lowest to highest) based on the usefulness of the content relevant to breast cancer. A medical expert identified six well-known websites related to breast cancer in advance as standards. We also used five keywords associated with breast cancer defined in the latest release of Systematized Nomenclature of Medicine-Clinical Terms (SNOMED CT) and analyzed their occurrence in the websites. Results Each search engine provided rich information related to breast cancer in the search results. All six standard websites were among the top 30 in search results of all four search engines. Google had the best search validity (in terms of whether a website could be opened), followed by Bing, Ask.com, and Yahoo!. The search results highly overlapped between the search engines, and the overlap between any two search engines was about half or more. On the other hand, each search engine emphasized various types of content differently. In terms of user satisfaction analysis, volunteer users scored Bing the highest for its usefulness, followed by Yahoo!, Google, and Ask.com. Conclusions Google, Yahoo!, Bing, and Ask.com are by and large effective search engines for helping lay users get health and medical information. Nevertheless, the current ranking methods have some pitfalls and there is room for improvement to help users get more accurate and useful information. We suggest that search engine users explore multiple search engines to search different types of health information and medical knowledge for their own needs and get a professional consultation if necessary. PMID:22672889

Descriptive analysis of context evaluation instrument for technical oral presentation skills evaluation: A case study in English technical communication course

NASA Astrophysics Data System (ADS)

Mohamed, Abdullah-Adnan; Asmawi, Adelina; Hamid, Mohd Rashid Ab; Mustafa, Zainol bin

2015-02-01

This paper reports a pilot study of Context Evaluation using a self-developed questionnaire distributed among engineering undergraduates at a university under study. The study aims to validate the self-developed questionnaires used in the Context evaluation, a component in the CIPP Model. The Context evaluation assesses background information for needs, assets, problems and opportunities relevant to beneficiaries of the study in a defined environment. Through the questionnaire, background information for the assessment of needs, assets and problems related to the engineering undergraduates' perceptions on the teaching and learning of technical oral presentation skills was collected and analysed. The questionnaire was developed using 5-points Likert scale to measure the constructs under study. They were distributed to 100 respondents with 79 returned. The respondents consisted of engineering undergraduates studied at various faculties at one technical university in Malaysia. The descriptive analysis of data for each item which makes up the construct for Context evaluation is found to be high. This implied that engineering undergraduates showed high interest in teaching and learning of technical oral presentation skills, thus their needs are met. Also, they agreed that assets and facilities are conducive to their learning. In conclusion, the context evaluation involving needs and assets factors are both considerably important; their needs are met and the assets and facilities do support their technical oral presentation skills learning experience.

Diving Deep: A Comparative Study of Educator Undergraduate and Graduate Backgrounds and Their Effect on Student Understanding of Engineering and Engineering Careers, Utilizing an Underwater Robotics Program

NASA Astrophysics Data System (ADS)

Scribner, J. Adam

Numerous studies have demonstrated that educators having degrees in their subjects significantly enhances student achievement, particularly in secondary mathematics and science (Chaney, 1995; Goe, 2007; Rowan, Chiang, & Miller, 1997; Wenglinsky, 2000). Yet, science teachers in states that adopt the Next Generation Science Standards will be facilitating classroom engineering activities despite the fact that few have backgrounds in engineering. This quantitative study analyzed ex-post facto WaterBotics (an innovative underwater robotics curriculum for middle and high school students) data to determine if educators having backgrounds in engineering (i.e., undergraduate and graduate degrees in engineering) positively affected student learning on two engineering outcomes: 1) the engineering design process, and 2) understanding of careers in engineering (who engineers are and what engineers do). The results indicated that educators having backgrounds in engineering did not significantly affect student understanding of the engineering design process or careers in engineering when compared to educators having backgrounds in science, mathematics, technology education, or other disciplines. There were, however, statistically significant differences between the groups of educators. Students of educators with backgrounds in technology education had the highest mean score on assessments pertaining to the engineering design process while students of educators with disciplines outside of STEM had the highest mean scores on instruments that assess for student understanding of careers in engineering. This might be due to the fact that educators who lack degrees in engineering but who teach engineering do a better job of "sticking to the script" of engineering curricula.

Biomedical engineering education at Politecnico di Milano: development and recent changes.

PubMed

Baselli, G

2009-05-01

The biomedical engineering (BME) programme at the Politecnico di Milano (POLIMI) is characterized by a strong interdisciplinary background in a broad range of engineering subjects applied to biology and medicine. Accordingly, the undergraduate level (3 years) provides a general education, which includes mechanics, chemistry and materials, electronics, and information technology both in the context of general engineering and within BME foundations. In contrast, the postgraduate programme (2 years) offers a broad choice of specializations in BME fields in close connection with the BME research activities and laboratories of the campus and with active interchange with the other engineering disciplines. The history of BME development at POLIMI is briefly recalled, together with the characteristics of educational and research work, which is strongly biased by a large polytechnic university with no medical school within the same campus; points of strength and weakness due to this background are discussed. The introduction of a double cycle (undergraduate and postgraduate) according to the Bologna process (2000) and the effects on the programme structure is considered. An early phase in which professional education was emphasized at undergraduate level is recalled, which was followed by the actual revision fostering basic engineering and BME education at the first level while leaving in-depth specialization to postgraduate studies or to on-the-job training.

Subway Environmental Design Handbook, Volume II, Subway Environment Simulation Computer Program, Version 4, Part 1, User's Manual

DOT National Transportation Integrated Search

1975-10-01

This document forms part of the Subway Environmental Design Handbook. It contains the background information and instructions to enable an engineer to perform an analysis of a subway system by using the Subway Environment Simulation (SES) computer pr...

The Warp and The Woof.

ERIC Educational Resources Information Center

Truxal, John G.

1983-01-01

Discusses how the topic of spectral (Fourier) decomposition is introduced in a communications course at State University of New York (Stony Brook). Includes background information on this engineering concept (without focusing on calculus), how it is demonstrated, applications, and how the spectrum of a given signal can be measured. (JN)

Highlights From the Third Annual Mayo Clinic Conference on Systems Engineering and Operations Research in Health Care

PubMed Central

Kamath, Janine R. A.; Osborn, John B.; Roger, Véronique L.; Rohleder, Thomas R.

2011-01-01

In August 2010, the Third Annual Mayo Clinic Conference on Systems Engineering and Operations Research in Health Care was held. The continuing mission of the conference is to gather a multidisciplinary group of systems engineers, clinicians, administrators, and academic professors to discuss the translation of systems engineering methods to more effective health care delivery. Education, research, and practice were enhanced via a mix of formal presentations, tutorials, and informal gatherings of participants with diverse backgrounds. Although the conference promotes a diversity of perspectives and methods, participants are united in their desire to find ways in which systems engineering can transform health care, especially in the context of health care reform and other significant changes affecting the delivery of health care. PMID:21803959

Pavement design and performance studies : progress report no. 4 on phase A, performance study of typical Virginia pavements.

DOT National Transportation Integrated Search

1970-01-01

The performance of in-service typical Virginia flexible and rigid pavements in all areas of the state is under evaluation. The objectives are to provide a ready reference for designers and field engineers and to provide background information for des...

Evaluation of Quality and Readability of Health Information Websites Identified through India's Major Search Engines

PubMed Central

Raj, S.; Sharma, V. L.; Singh, A. J.; Goel, S.

2016-01-01

Background. The available health information on websites should be reliable and accurate in order to make informed decisions by community. This study was done to assess the quality and readability of health information websites on World Wide Web in India. Methods. This cross-sectional study was carried out in June 2014. The key words “Health” and “Information” were used on search engines “Google” and “Yahoo.” Out of 50 websites (25 from each search engines), after exclusion, 32 websites were evaluated. LIDA tool was used to assess the quality whereas the readability was assessed using Flesch Reading Ease Score (FRES), Flesch-Kincaid Grade Level (FKGL), and SMOG. Results. Forty percent of websites (n = 13) were sponsored by government. Health On the Net Code of Conduct (HONcode) certification was present on 50% (n = 16) of websites. The mean LIDA score (74.31) was average. Only 3 websites scored high on LIDA score. Only five had readability scores at recommended sixth-grade level. Conclusion. Most health information websites had average quality especially in terms of usability and reliability and were written at high readability levels. Efforts are needed to develop the health information websites which can help general population in informed decision making. PMID:27119025

Surfing the web during pandemic flu: availability of World Health Organization recommendations on prevention

PubMed Central

2010-01-01

Background People often search for information on influenza A(H1N1)v prevention on the web. The extent to which information found on the Internet is consistent with recommendations issued by the World Health Organization is unknown. Methods We conducted a search for "swine flu" accessing 3 of the most popular search engines through different proxy servers located in 4 English-speaking countries (Australia, Canada, UK, USA). We explored each site resulting from the searches, up to 4 clicks starting from the search engine page, analyzing availability of World Health Organization recommendations for swine flu prevention. Results Information on hand cleaning was reported on 79% of the 147 websites analyzed; staying home when sick was reported on 77.5% of the websites; disposing tissues after sneezing on 75.5% of the websites. Availability of other recommendations was lower. The probability of finding preventative recommendations consistent with World Health Organization varied by country, type of website, and search engine. Conclusions Despite media coverage on H1N1 influenza, relevant information for prevention is not easily found on the web. Strategies to improve information delivery to the general public through this channel should be improved. PMID:20854690

Continence technologies whitepaper: Informing new engineering science research.

PubMed

Culmer, Pete; Alazmani, Ali; Bryant, Mike; Mancuso, Elena; King, Sarah; Mapunde, Vee; Jeays-Ward, Katherine; Heron, Nicola; Pearson, Russell; Vollebregt, Paul F; Corner, Lynne; Day, Richard

2018-06-01

Advances in healthcare technology for continence have historically been limited compared to other areas of medicine, reflecting the complexities of the condition and social stigma which act as a barrier to participation. This whitepaper has been developed to inspire and direct the engineering science community towards research opportunities that exist for continence technologies that address unmet needs in diagnosis, treatment and long-term management. Our aim is to pinpoint key challenges and highlight related research opportunities for novel technological advances. To do so, we draw on experience and expertise from academics, clinicians, patients and patient groups linked to continence healthcare. This is presented in four areas of consideration: the clinical pathway, patient perspective, research challenges and effective innovation. In each we introduce seminal research, background information and demonstrative case-studies, before discussing their relevance to engineering science researchers who are interested in approaching this overlooked but vital area of healthcare.

Myths and realities: Defining re-engineering for a large organization

NASA Technical Reports Server (NTRS)

Yin, Sandra; Mccreary, Julia

1992-01-01

This paper describes the background and results of three studies concerning software reverse engineering, re-engineering, and reuse (R3) hosted by the Internal Revenue Service in 1991 and 1992. The situation at the Internal Revenue--aging, piecemeal computer systems and outdated technology maintained by a large staff--is familiar to many institutions, especially among management information systems. The IRS is distinctive for the sheer magnitude and diversity of its problems; the country's tax records are processed using assembly language and COBOL and spread across tape and network DBMS files. How do we proceed with replacing legacy systems? The three software re-engineering studies looked at methods, CASE tool support, and performed a prototype project using re-engineering methods and tools. During the course of these projects, we discovered critical issues broader than the mechanical definitions of methods and tool technology.

Spatial confidentiality and GIS: re-engineering mortality locations from published maps about Hurricane Katrina

PubMed Central

Curtis, Andrew J; Mills, Jacqueline W; Leitner, Michael

2006-01-01

Background Geographic Information Systems (GIS) can provide valuable insight into patterns of human activity. Online spatial display applications, such as Google Earth, can democratise this information by disseminating it to the general public. Although this is a generally positive advance for society, there is a legitimate concern involving the disclosure of confidential information through spatial display. Although guidelines exist for aggregated data, little has been written concerning the display of point level information. The concern is that a map containing points representing cases of cancer or an infectious disease, could be re-engineered back to identify an actual residence. This risk is investigated using point mortality locations from Hurricane Katrina re-engineered from a map published in the Baton Rouge Advocate newspaper, and a field team validating these residences using search and rescue building markings. Results We show that the residence of an individual, visualized as a generalized point covering approximately one and half city blocks on a map, can be re-engineered back to identify the actual house location, or at least a close neighbour, even if the map contains little spatial reference information. The degree of re-engineering success is also shown to depend on the urban characteristic of the neighborhood. Conclusion The results in this paper suggest a need to re-evaluate current guidelines for the display of point (address level) data. Examples of other point maps displaying health data extracted from the academic literature are presented where a similar re-engineering approach might cause concern with respect to violating confidentiality. More research is also needed into the role urban structure plays in the accuracy of re-engineering. We suggest that health and spatial scientists should be proactive and suggest a series of point level spatial confidentiality guidelines before governmental decisions are made which may be reactionary toward the threat of revealing confidential information, thereby imposing draconian limits on research using a GIS. PMID:17032448

Confronting Color-Blind STEM Talent Development: Toward a Contextual Model for Black Student STEM Identity

ERIC Educational Resources Information Center

Collins, Kristina Henry

2018-01-01

What is Black student's science, technology, engineering, and mathematics (STEM) identity? The author addresses this question through a synthesis of the literature that includes studies that explore Black student identity. Background information regarding STEM achievement and persistence followed by empirical studies that explore STEM attitudes…

Functional Restoration for the Stroke Survivor: Informing the Efforts of Engineers

PubMed Central

Patton, James; Smal, Steven L.; Rymer, William Zev

2009-01-01

As bioengineers begin to notice the importance of therapy in the recovery from stroke and other brain injuries, new technologies will be increasingly conceived, adapted, and designed to improve the patient’s road to recovery. What is clear from engineering history, however, is that the best engineering efforts are often built on strong scientific foundations. In an effort to inform engineers with the necessary background on cutting edge research in the field of stroke and motor recovery, this article summarizes the views of several experts in the field as a result of a workshop held in 2006 on the topic. Here we elaborate on several areas relevant to this goal, including the pathophysiology of stroke and stroke recovery, the biomechanics, the secondary peripheral changes in muscle and other tissue, and the results of neuroimaging studies. One conclusion is that the current state of knowledge is now ripe for research using machines but that highly sophisticated robotic devices may not yet be needed. Instead, what may be needed is basic evidence that shows a difference in one therapeutic strategy over another. PMID:19158061

Processing multilevel secure test and evaluation information

NASA Astrophysics Data System (ADS)

Hurlburt, George; Hildreth, Bradley; Acevedo, Teresa

1994-07-01

The Test and Evaluation Community Network (TECNET) is building a Multilevel Secure (MLS) system. This system features simultaneous access to classified and unclassified information and easy access through widely available communications channels. It provides the necessary separation of classification levels, assured through the use of trusted system design techniques, security assessments and evaluations. This system enables cleared T&E users to view and manipulate classified and unclassified information resources either using a single terminal interface or multiple windows in a graphical user interface. TECNET is in direct partnership with the National Security Agency (NSA) to develop and field the MLS TECNET capability in the near term. The centerpiece of this partnership is a state-of-the-art Concurrent Systems Security Engineering (CSSE) process. In developing the MLS TECNET capability, TECNET and NSA are providing members, with various expertise and diverse backgrounds, to participate in the CSSE process. The CSSE process is founded on the concepts of both Systems Engineering and Concurrent Engineering. Systems Engineering is an interdisciplinary approach to evolve and verify an integrated and life cycle balanced set of system product and process solutions that satisfy customer needs (ASD/ENS-MIL STD 499B 1992). Concurrent Engineering is design and development using the simultaneous, applied talents of a diverse group of people with the appropriate skills. Harnessing diverse talents to support CSSE requires active participation by team members in an environment that both respects and encourages diversity.

Systems Engineering and Project Management for Product Development: Optimizing Their Working Interfaces

DTIC Science & Technology

2013-09-01

reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instruction...Office of Management and Budget, Paperwork Reduction Project (0704-0188) Washington DC 20503. 1 . AGENCY USE ONLY (Leave blank) 2. REPORT DATE... 1   A.  BACKGROUND ................................................................................... 1   B.  PRODUCT DEVELOPMENT

Capacity-oriented curriculum system of optoelectronics in the context of large category cultivation

NASA Astrophysics Data System (ADS)

Luo, Yuan; Hu, Zhangfang; Zhang, Yi

2017-08-01

In order to cultivate the innovative talents with the comprehensive development to meet the talents demand for development of economic society, Chongqing University of Posts and Telecommunications implements cultivation based on broadening basic education and enrolment in large category of general education. Optoelectronic information science and engineering major belongs to the electronic engineering category. The "2 +2" mode is utilized for personnel training, where students are without major in the first and second year and assigned to a major within the major categories in the end of the second year. In the context of the comprehensive cultivation, for the changes in the demand for professionals in the global competitive environment with the currently rapid development, especially the demand for the professional engineering technology personnel suitable to industry and development of local economic society, the concept of CDIO engineering ability cultivation is used for reference. Thus the curriculum system for the three-node structure optoelectronic information science and engineering major is proposed, which attaches great importance to engineering practice and innovation cultivation under the background of the comprehensive cultivation. The conformity between the curriculum system and the personnel training objectives is guaranteed effectively, and the consistency between the teaching philosophy and the teaching behavior is enhanced. Therefore, the idea of major construction is clear with specific characteristics.

Perception and knowledge about stem cell and tissue engineering research: a survey amongst researchers and medical practitioners in perinatology.

PubMed

Gucciardo, Léonardo; De Koninck, Philip; Verfaillie, Catherine; Lories, Rik; Deprest, Jan

2014-08-01

Stem cell and tissue engineering (SC&TE) research remain controversial. Polemics are potential hurdles for raising public funds for research and clinical implementation. In view of future applications of SC&TE in perinatal conditions, we aimed to measure the background knowledge, perceptions or beliefs on SC&TE research among clinicians and academic researchers with perinatal applications on the department's research agenda. We polled three professional categories: general obstetrician gynecologists, perinatologists and basic or translational researchers in development and regeneration. The survey included questions on demographics, work environment, educational background, general knowledge, expectations, opinions and ethical reflections of the respondent about SC&TE. The response rate was 39 %. Respondents were mainly female (54 %) and under 40 years (63 %). The general background knowledge about SC&TE is low. Respondents confirm that remaining controversies still arise from the confusion that stem cell research coincides with embryo manipulation. Clinicians assume that stem cell research has reached the level of clinical implementation, and accept the risks associated of purposely harvesting fetal amniotic cells. Researchers in contrast are more cautious about both implementation and risks. Professionals in the field of perinatology may benefit of a better background knowledge and information on current SC & TE research. Though clinicians may be less aware of the current state of knowledge, they are open to clinical implementation, whereas dedicated researchers remain cautious. In view of the clinical introduction of SC & TE, purposed designed informative action should be taken and safety studies executed, hence avoid sustaining needless polemics.

Engineered materials characterization report, volume 3 - corrosion data and modeling update for viability assessments

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCright, R D

1998-06-30

This Engineered Materials Characterization Report (EMCR), Volume 3, discusses in considerable detail the work of the past 18 months on testing the candidate materials proposed for the waste-package (WP) container and on modeling the performance of those materials in the Yucca Mountain (YM) repository setting This report was prepared as an update of information and serves as one of the supporting documents to the Viability Assessment (VA) of the Yucca Mountain Project. Previous versions of the EMCR have provided a history and background of container-materials selection and evaluation (Volume I), a compilation of physical and mechanical properties for the WPmore » design effort (Volume 2), and corrosion-test data and performance-modeling activities (Volume 3). Because the information in Volumes 1 and 2 is still largely current, those volumes are not being revised. As new information becomes available in the testing and modeling efforts, Volume 3 is periodically updated to include that information.« less

Supporting information retrieval from electronic health records: A report of University of Michigan's nine-year experience in developing and using the Electronic Medical Record Search Engine (EMERSE).

PubMed

Hanauer, David A; Mei, Qiaozhu; Law, James; Khanna, Ritu; Zheng, Kai

2015-06-01

This paper describes the University of Michigan's nine-year experience in developing and using a full-text search engine designed to facilitate information retrieval (IR) from narrative documents stored in electronic health records (EHRs). The system, called the Electronic Medical Record Search Engine (EMERSE), functions similar to Google but is equipped with special functionalities for handling challenges unique to retrieving information from medical text. Key features that distinguish EMERSE from general-purpose search engines are discussed, with an emphasis on functions crucial to (1) improving medical IR performance and (2) assuring search quality and results consistency regardless of users' medical background, stage of training, or level of technical expertise. Since its initial deployment, EMERSE has been enthusiastically embraced by clinicians, administrators, and clinical and translational researchers. To date, the system has been used in supporting more than 750 research projects yielding 80 peer-reviewed publications. In several evaluation studies, EMERSE demonstrated very high levels of sensitivity and specificity in addition to greatly improved chart review efficiency. Increased availability of electronic data in healthcare does not automatically warrant increased availability of information. The success of EMERSE at our institution illustrates that free-text EHR search engines can be a valuable tool to help practitioners and researchers retrieve information from EHRs more effectively and efficiently, enabling critical tasks such as patient case synthesis and research data abstraction. EMERSE, available free of charge for academic use, represents a state-of-the-art medical IR tool with proven effectiveness and user acceptance. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Work, Productivity, and Human Performance: Practical Case Studies in Ergonomics, Human Factors and Human Engineering.

ERIC Educational Resources Information Center

Fraser, T. M.; Pityn, P. J.

This book contains 12 case histories, each based on a real-life problem, that show how a manager can use common sense, knowledge, and interpersonal skills to solve problems in human performance at work. Each case study describes a worker's problem and provides background information and an assignment; solutions are suggested. The following cases…

Learning from the Parallel Pathways of Makers to Broaden Pathways to Engineering

ERIC Educational Resources Information Center

Foster, Christina; Wigner, Aubrey; Lande, Micah; Jordan, Shawn S.

2018-01-01

Background: Makers are a growing community of STEM-minded people who bridge technical and non-technical backgrounds to imagine, build and fabricate engineering systems. Some have engineering training, some do not. This paper presents a study to explore the educational pathways of adult Makers and how they intersect with engineering. This research…

Systems engineering for Air Force C3I systems

NASA Astrophysics Data System (ADS)

Monahan, John H.

1993-06-01

Each day, sophisticated information systems provide the U.S. with crucial capabilities both to understand the world situation and to react effectively as required by our nation's decision makers. These systems attest to the success of the cooperative efforts of government and industry. Over the last 35 years, to help provide those capabilities, The MITRE Corporation has been privileged to fulfill the role of systems engineer on more than 100 different command, control, communications, and intelligence (C3I) systems for the Air Force and other elements of the Department of Defense (DOD). A long history of successful performance in this broad role provides MITRE with detailed knowledge of the systems' operational capabilities and needs, proficiency in their systems engineering, and a C3I-related corporate memory unmatched by any other organization. That background is the foundation of this book on systems engineering at MITRE.

Teaching smartphone and microcontroller systems using "Android Java"

NASA Astrophysics Data System (ADS)

Tigrek, Seyitriza

Mobile devices are becoming indispensable tools for many students and educators. Mobile technology is starting a new era in the computing methodologies in many engineering disciplines and laboratories. Microcontroller extension that communicates with mobile devices will take the data acquisition and control process into a new level in the sensing technology and communication. The purpose of this thesis is to develop a framework to incorporate the new mobile platform with robust embedded systems into the engineering curriculum. For this purpose a course material is developed "Introduction to Programming Java on a Mobile Platform" to teach novice programmers how to create applications, specifically on Android. Combining an introductory level programming class with the Android platform can appeal to non-programming individuals in multiple disciplines. The proposed course curriculum reduces the learning time, and allows senior engineering students to use the new framework for their specific needs in the labs such as mobile data acquisition and control projects. This work provides techniques for instructors with modest programming background to teach cutting edge technology, which is smartphone programming. Techniques developed in this work minimize unnecessary information carried into current teaching approaches with hands-on practice. It also helps the students with minimal background requirements overcome the barriers that have evolved around computer programming. The motivation of this thesis is to create a tailored programming introductory course to teach Java programming on Android by incorporating selected efficient methods from extant literature. The mechanism proposed in this thesis is to keep students motivated by an active approach based on student-centered learning with collaborative work. Teamwork through pair programming is adapted in this teaching process. Bloom's taxonomy, along with a knowledge survey, is used as a guide to classify the information and exercise problems. A prototype curriculum is a deliverable of this research that is suitable for novice programmers-such as engineering freshmen students. It also contains advanced material that allows senior students to use mobile phone and a microcontroller system to enhance engineering laboratories.

Launch Vehicle Design and Optimization Methods and Priority for the Advanced Engineering Environment

NASA Technical Reports Server (NTRS)

Rowell, Lawrence F.; Korte, John J.

2003-01-01

NASA's Advanced Engineering Environment (AEE) is a research and development program that will improve collaboration among design engineers for launch vehicle conceptual design and provide the infrastructure (methods and framework) necessary to enable that environment. In this paper, three major technical challenges facing the AEE program are identified, and three specific design problems are selected to demonstrate how advanced methods can improve current design activities. References are made to studies that demonstrate these design problems and methods, and these studies will provide the detailed information and check cases to support incorporation of these methods into the AEE. This paper provides background and terminology for discussing the launch vehicle conceptual design problem so that the diverse AEE user community can participate in prioritizing the AEE development effort.

CMMI (registered trademark) for Services, Version 1.2

DTIC Science & Technology

2009-02-01

background in information technology, especially those familiar with disciplines like service - oriented architecture (SOA) or software as a service ( SaaS ). In... services , the Software Engineering Institute (SEI) has found several dimensions that an organization can focus on to improve its business. Figure...International Business Machines) and the SEI [Humphrey 1989]. Humphrey’s book, Managing the Software Process, provides a CMMI for Services Version 1.2

NASA Image eXchange (NIX)

NASA Technical Reports Server (NTRS)

vonOfenheim. William H. C.; Heimerl, N. Lynn; Binkley, Robert L.; Curry, Marty A.; Slater, Richard T.; Nolan, Gerald J.; Griswold, T. Britt; Kovach, Robert D.; Corbin, Barney H.; Hewitt, Raymond W.

1998-01-01

This paper discusses the technical aspects of and the project background for the NASA Image exchange (NIX). NIX, which provides a single entry point to search selected image databases at the NASA Centers, is a meta-search engine (i.e., a search engine that communicates with other search engines). It uses these distributed digital image databases to access photographs, animations, and their associated descriptive information (meta-data). NIX is available for use at the following URL: http://nix.nasa.gov./NIX, which was sponsored by NASAs Scientific and Technical Information (STI) Program, currently serves images from seven NASA Centers. Plans are under way to link image databases from three additional NASA Centers. images and their associated meta-data, which are accessible by NIX, reside at the originating Centers, and NIX utilizes a virtual central site that communicates with each of these sites. Incorporated into the virtual central site are several protocols to support searches from a diverse collection of database engines. The searches are performed in parallel to ensure optimization of response times. To augment the search capability, browse functionality with pre-defined categories has been built into NIX, thereby ensuring dissemination of 'best-of-breed' imagery. As a final recourse, NIX offers access to a help desk via an on-line form to help locate images and information either within the scope of NIX or from available external sources.

Environmental resources of selected areas of Hawaii: Ecological resources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trettin, C.C.; Tolbert, V.R.; Jones, A.T.

1995-03-01

This report has been prepared to make available and archive the background scientific data and related information collected on ecological resources during the preparation of the environmental impact statement (EIS) for Phases 3 and 4 of the Hawaii Geothermal Project (HGP) as defined by the state of Hawaii in its April 1989 proposal to Congress. Since the state of Hawaii is no longer pursuing or planning to pursue the HGP, DOE considers the project to be terminated. The background scientific data and related information presented in this report focus on several areas of Hawaii County. In this report, reference ismore » made to these areas as study areas rather than as areas where proposed or alternative facilities of the HGP would be located. The resource areas addressed herein include terrestrial ecology, aquatic ecology, and marine ecology. The scientific background data and related information that were obtained from review of the (1) scientific literature, (2) government and private sector reports, (3) studies done under DOE interagency agreements with the US Fish and Wildlife Service (FWS) and with the US Army Corps of Engineers (COE), and (4) observations made during site visits are being made available for future research in these areas.« less

Evaluating a Federated Medical Search Engine

PubMed Central

Belden, J.; Williams, J.; Richardson, B.; Schuster, K.

2014-01-01

Summary Background Federated medical search engines are health information systems that provide a single access point to different types of information. Their efficiency as clinical decision support tools has been demonstrated through numerous evaluations. Despite their rigor, very few of these studies report holistic evaluations of medical search engines and even fewer base their evaluations on existing evaluation frameworks. Objectives To evaluate a federated medical search engine, MedSocket, for its potential net benefits in an established clinical setting. Methods This study applied the Human, Organization, and Technology (HOT-fit) evaluation framework in order to evaluate MedSocket. The hierarchical structure of the HOT-factors allowed for identification of a combination of efficiency metrics. Human fit was evaluated through user satisfaction and patterns of system use; technology fit was evaluated through the measurements of time-on-task and the accuracy of the found answers; and organization fit was evaluated from the perspective of system fit to the existing organizational structure. Results Evaluations produced mixed results and suggested several opportunities for system improvement. On average, participants were satisfied with MedSocket searches and confident in the accuracy of retrieved answers. However, MedSocket did not meet participants’ expectations in terms of download speed, access to information, and relevance of the search results. These mixed results made it necessary to conclude that in the case of MedSocket, technology fit had a significant influence on the human and organization fit. Hence, improving technological capabilities of the system is critical before its net benefits can become noticeable. Conclusions The HOT-fit evaluation framework was instrumental in tailoring the methodology for conducting a comprehensive evaluation of the search engine. Such multidimensional evaluation of the search engine resulted in recommendations for system improvement. PMID:25298813

Voice-enabled Knowledge Engine using Flood Ontology and Natural Language Processing

NASA Astrophysics Data System (ADS)

Sermet, M. Y.; Demir, I.; Krajewski, W. F.

2015-12-01

The Iowa Flood Information System (IFIS) is a web-based platform developed by the Iowa Flood Center (IFC) to provide access to flood inundation maps, real-time flood conditions, flood forecasts, flood-related data, information and interactive visualizations for communities in Iowa. The IFIS is designed for use by general public, often people with no domain knowledge and limited general science background. To improve effective communication with such audience, we have introduced a voice-enabled knowledge engine on flood related issues in IFIS. Instead of navigating within many features and interfaces of the information system and web-based sources, the system provides dynamic computations based on a collection of built-in data, analysis, and methods. The IFIS Knowledge Engine connects to real-time stream gauges, in-house data sources, analysis and visualization tools to answer natural language questions. Our goal is the systematization of data and modeling results on flood related issues in Iowa, and to provide an interface for definitive answers to factual queries. The goal of the knowledge engine is to make all flood related knowledge in Iowa easily accessible to everyone, and support voice-enabled natural language input. We aim to integrate and curate all flood related data, implement analytical and visualization tools, and make it possible to compute answers from questions. The IFIS explicitly implements analytical methods and models, as algorithms, and curates all flood related data and resources so that all these resources are computable. The IFIS Knowledge Engine computes the answer by deriving it from its computational knowledge base. The knowledge engine processes the statement, access data warehouse, run complex database queries on the server-side and return outputs in various formats. This presentation provides an overview of IFIS Knowledge Engine, its unique information interface and functionality as an educational tool, and discusses the future plans for providing knowledge on flood related issues and resources. IFIS Knowledge Engine provides an alternative access method to these comprehensive set of tools and data resources available in IFIS. Current implementation of the system accepts free-form input and voice recognition capabilities within browser and mobile applications.

MissileLab User’s Guide

DTIC Science & Technology

2009-02-01

extension) that contain the airframe geometry specific to a single configuration. Results from a MissileLab run will be stored in a directory...re)created and contain all APE results and associated input files. C. Background In the early stages of missile system design, it is necessary to...Copying the AeroEngine Files After installation, the subdirectories in the “AeroEngine” directory contain contact information on how to obtain valid

Solar thermal technical information guide

NASA Astrophysics Data System (ADS)

1985-05-01

This guide is designed to help investigators search for information in the solar thermal technology field. The information ranges from history and technology basics to the latest in research and develoment. It is written to help several audiences, including engineers and scientists who may be unfamiliar with a particular aspect of solar thermal energy, university researchers who are interested in the field, manufacturers needing to learn more about specific topics, and librarians who provide information to their clientele. The guide is divided into ten chapters, with Chapters 1 to 8 providing background on solar thermal energy development (including its history and current status) by topic. Within each topic, an overview is provided with references to relevant publications or information sources. Chapters 9 and 10 contain directories listing research centers and major technical information sources, respectively.

Information Communication using Knowledge Engine on Flood Issues

NASA Astrophysics Data System (ADS)

Demir, I.; Krajewski, W. F.

2012-04-01

The Iowa Flood Information System (IFIS) is a web-based platform developed by the Iowa Flood Center (IFC) to provide access to and visualization of flood inundation maps, real-time flood conditions, flood forecasts both short-term and seasonal, and other flood-related data for communities in Iowa. The system is designed for use by general public, often people with no domain knowledge and poor general science background. To improve effective communication with such audience, we have introduced a new way in IFIS to get information on flood related issues - instead of by navigating within hundreds of features and interfaces of the information system and web-based sources-- by providing dynamic computations based on a collection of built-in data, analysis, and methods. The IFIS Knowledge Engine connects to distributed sources of real-time stream gauges, and in-house data sources, analysis and visualization tools to answer questions grouped into several categories. Users will be able to provide input based on the query within the categories of rainfall, flood conditions, forecast, inundation maps, flood risk and data sensors. Our goal is the systematization of knowledge on flood related issues, and to provide a single source for definitive answers to factual queries. Long-term goal of this knowledge engine is to make all flood related knowledge easily accessible to everyone, and provide educational geoinformatics tool. The future implementation of the system will be able to accept free-form input and voice recognition capabilities within browser and mobile applications. We intend to deliver increasing capabilities for the system over the coming releases of IFIS. This presentation provides an overview of our Knowledge Engine, its unique information interface and functionality as an educational tool, and discusses the future plans for providing knowledge on flood related issues and resources.

Crew appliance concepts. Volume 1, appendix A: Bibliography. [manned space shuttle orbiter environmental control and life support systems

NASA Technical Reports Server (NTRS)

Proctor, B. W.; Reysa, R. P.; Russell, D. J.

1975-01-01

A review of crew appliance related literature was made to provide background engineering information for development of conceptual appliance systems for the shuttle orbiter and the modular space station. From this review, a file containing abstracts of 299 appliance-related documents coded according to subject was developed along with a computerized bibliography of 682 references. Trade studies were conducted using information from these references to determine the optimum concepts to satisfy the shuttle and space station mission requirements. An appliance system was devised for each vehicle which has minimum impact to the respective environmental control system with the smallest possible weight, volume, and electrical penalty. Engineering parameters for each appliance concept considered are presented along with the total thermal and electrical loads and weight and volume penalties for each of the optimized appliance systems.

Combining Search Engines for Comparative Proteomics

PubMed Central

Tabb, David

2012-01-01

Many proteomics laboratories have found spectral counting to be an ideal way to recognize biomarkers that differentiate cohorts of samples. This approach assumes that proteins that differ in quantity between samples will generate different numbers of identifiable tandem mass spectra. Increasingly, researchers are employing multiple search engines to maximize the identifications generated from data collections. This talk evaluates four strategies to combine information from multiple search engines in comparative proteomics. The “Count Sum” model pools the spectra across search engines. The “Vote Counting” model combines the judgments from each search engine by protein. Two other models employ parametric and non-parametric analyses of protein-specific p-values from different search engines. We evaluated the four strategies in two different data sets. The ABRF iPRG 2009 study generated five LC-MS/MS analyses of “red” E. coli and five analyses of “yellow” E. coli. NCI CPTAC Study 6 generated five concentrations of Sigma UPS1 spiked into a yeast background. All data were identified with X!Tandem, Sequest, MyriMatch, and TagRecon. For both sample types, “Vote Counting” appeared to manage the diverse identification sets most effectively, yielding heightened discrimination as more search engines were added.

NASA y Tú (NASA and You) - NASA's partnership with UNIVISION to promote Science, Technology, Engineering, and Math (STEM) careers among Hispanic youth

NASA Astrophysics Data System (ADS)

Colon-Robles, M.; Gilman, I.; Verstynen, S.; Jaramillo, R.; Bednar, S.; Shortridge, T.; Bravo, J.; Bowers, S.

2010-12-01

NASA is working with Univision Communications Inc. in support of the Spanish-language media outlet's initiative to improve high school graduation rates, prepare Hispanic students for college, and encourage them to pursue careers in science, technology, engineering and mathematics, or STEM, disciplines. A total of 52 Public Service Announcements (PSAs) named “Visión NASA” or “Vision: NASA” are being developed by NASA centered on current innovative technologies from all four NASA mission directorates (Science, Exploration Systems, Space Operations, and Aerodynamics). Public service announcements are being produced from scratch in both English and Spanish for a total of 26 announcements in each language. Interviews were conducted with NASA Hispanic Scientists or Engineers on the selected PSAs topics to both supply information on their subject matter and to serve as role models for Hispanic youth. Each topic selected for the PSAs has an accompanying website which includes the announcements, interviews with a Hispanic scientists or engineers, background information on the topic, and educational resources for students, parents and teachers. Products developed through this partnership will be presented including the websites of each PSA and their accompanying educational resources. The use of these educational resources for professional development, outreach and informal events, and for in-classroom uses will also be presented. This collaboration with Univision complements NASA's current education efforts to engage underrepresented and underserved students in the critical STEM fields.

New Method for Knowledge Management Focused on Communication Pattern in Product Development

NASA Astrophysics Data System (ADS)

Noguchi, Takashi; Shiba, Hajime

In the field of manufacturing, the importance of utilizing knowledge and know-how has been growing. To meet this background, there is a need for new methods to efficiently accumulate and extract effective knowledge and know-how. To facilitate the extraction of knowledge and know-how needed by engineers, we first defined business process information which includes schedule/progress information, document data, information about communication among parties concerned, and information which corresponds to these three types of information. Based on our definitions, we proposed an IT system (FlexPIM: Flexible and collaborative Process Information Management) to register and accumulate business process information with the least effort. In order to efficiently extract effective information from huge volumes of accumulated business process information, focusing attention on “actions” and communication patterns, we propose a new extraction method using communication patterns. And the validity of this method has been verified for some communication patterns.

MASS TRANSIT: FTA Could Relieve New Starts Program Funding Constraints

DTIC Science & Technology

2001-08-01

progress through a local or regional review of alternatives, develop preliminary engineering plans , and obtain FTA’s approval for final design.7 TEA-21...and transit programs can also be used to develop, plan , and/or construct these projects. 7The alternatives analysis stage provides information on the...include right-of-way acquisition, utility relocation, and the preparation of final construction plans and cost estimates. Background Page 5 GAO-01-987 New

CRAG (Composite Research Advisory Group) Test Methods for the Measurement of the Engineering Properties of Fibre Reinforced Plastics

DTIC Science & Technology

1988-02-01

Environmental effects Method 900 - Background information on environmental effects 78 Method 901 - Method of assessment of diffusivity properties of fibre... environmental conditioning. Strain gauges can sometimes fail during prolonged fatigue testing, and it is therefore prudent to undertake a secondary check...fibre volume fraction of the laminate as described in section 1000. (iv) The environmental history of the specimen prior to test. (v) The environmental

At a glance: cellular biology for engineers.

PubMed

Khoshmanesh, K; Kouzani, A Z; Nahavandi, S; Baratchi, S; Kanwar, J R

2008-10-01

Engineering contributions have played an important role in the rise and evolution of cellular biology. Engineering technologies have helped biologists to explore the living organisms at cellular and molecular levels, and have created new opportunities to tackle the unsolved biological problems. There is now a growing demand to further expand the role of engineering in cellular biology research. For an engineer to play an effective role in cellular biology, the first essential step is to understand the cells and their components. However, the stumbling block of this step is to comprehend the information given in the cellular biology literature because it best suits the readers with a biological background. This paper aims to overcome this bottleneck by describing the human cell components as micro-plants that form cells as micro-bio-factories. This concept can accelerate the engineers' comprehension of the subject. In this paper, first the structure and function of different cell components are described. In addition, the engineering attempts to mimic various cell components through numerical modelling or physical implementation are highlighted. Next, the interaction of different cell components that facilitate complicated chemical processes, such as energy generation and protein synthesis, are described. These complex interactions are translated into simple flow diagrams, generally used by engineers to represent multi-component processes.

Leadership training in science, technology, engineering and mathematics education in Bulgaria

NASA Astrophysics Data System (ADS)

Bairaktarova, Diana; Cox, Monica F.; Evangelou, Demetra

2011-12-01

This synthesis paper explores current leadership training in science, technology, engineering and mathematics (STEM) education in Bulgaria. The analysis begins with discussion of global factors influencing the implementation of leadership training in STEM education in general and then presents information about the current status of leadership training in Bulgaria with emphases on the country's economics, politics and geographical location as specific factors influencing leadership education. A short background of Bulgaria is presented with regard to population, gross domestic product, educational system, engineering force and possible need for leaders in industry in Bulgaria and the European Union. The paper provides an overall view about the current status of leadership training in all Bulgarian universities offering STEM education and concentrates specifically on two major universities by examining their currently offered programmes. As part of the discussion, similar training elements in other European countries and the USA are presented.

Current Status of Atopic Dermatitis-Related Information Available on the Internet in South Korea

PubMed Central

Lee, Yong Jun; Kim, Hyun Jee; Yu, Dong Soo; Lee, Young Bok; Hahn, Hyung Jin

2016-01-01

Background Patients with atopic dermatitis (AD) often resort to the internet for disease-related information. We believe that dermatologists be informed about the current accessibility of information to patients and the potential for misleading patients into making poor treatment decisions. Objective The study was carried out in order to determine the nature of AD-related information available on the internet in Korea, and to identify any changes since our last survey in 2005. The quality of information offered and the involvement of medical doctors in certain websites were also investigated. Methods Taking into account the current search engine market share in Korea, we gathered all search results obtained from the three major search engines using the keyword 'atopy', and investigated the nature of the information retrieved. Results The search results showed less commercial sites than our previous study in 2005. There is a dramatic increase in the number of public bodies offering information about AD. In addition, the quality of information available online has improved since our last survey. Conclusion The phenomenon of 'commercial overcrowding' seems to have stabilized. As AD becomes a more social phenomenon, patients are better informed than ever before. However, the information available on the internet still requires to be accompanied by consultation by dermatologists. We believe that self-regulation using a format such as the Health on the Net Foundation's code of conduct (HONcode) may improve the quality of online information accessible to patients with AD in Korea. PMID:26848212

Culturally responsive engineering education: A case study of a pre-college introductory engineering course at Tibetan Children's Village School of Selakui

NASA Astrophysics Data System (ADS)

Santiago, Marisol Mercado

Culturally responsive teaching has been argued to be effective in the education of Indigenous youth. This approach emphasizes the legitimacy of a group's cultural heritage, helps to associate abstract academic knowledge with the group's sociocultural context, seeks to incorporate a variety of strategies to engage students who have different learning styles, and strives to integrate multicultural information in the educational contents, among other considerations. In this work, I explore the outcomes of a culturally responsive introductory engineering short course that I developed and taught to Tibetan students at Tibetan Children's Village of Selakui (in Uttarakhand, India). Based on my ethnographic research in Tibetan communities in northern India, I examine two research questions: (a) What are the processes to develop and implement a pre-college culturally responsive introductory engineering course? and (b) How do Tibetan culture and Buddhism influence the engineering design and teamwork of the pre-college Tibetan students who took the course? I designed then taught the course that featured elementary lectures on sustainability, introductory engineering design, energy alternatives, and manufacturing engineering. The course also included a pre-college engineering design project through which Tibetan high school students investigated a problem at the school and designed a possible solution to it. Drawing from postcolonial studies, engineering studies, engineering and social justice, Buddhist studies, and Tibetan studies, I provide an analysis of my findings. Based on my findings, I conclude that my culturally responsive approach of teaching was an effective method to help students feel that their cultural background was respected and included in a pre-college engineering course; however, some students felt resistance toward the teaching approach. In addition, the culturally relevant content that connected with their ways of living in their school, Tibetan communities, and surroundings helped the students to relate to abstract concepts in familiar settings. Lastly, they appreciated that I brought to the course relevant information about technology and society in India (their host country), engineers' work in industry, technologies used in other contexts as well, and projects that show how engineers can help to alleviate poverty. The findings of my research can inform (a) educators who are interested in integrating culturally responsive activities in their teaching methods, (b) researchers or teachers in ethnic minority schools abroad, (c) educators interested in developing engineering activities or courses for underrepresented ethnic minorities, ethnic diasporas or refugee youth in the United States, and (d) facilitators at multicultural engineering summer camps in the United States.

5. Engine room, general view looking east, engine #2 in ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Engine room, general view looking east, engine #2 in foreground (1895, now cannibalized for parts), engine #3 is in the background - East Boston Pumping Station, Chelsea Street at Chelsea Creek, Boston, Suffolk County, MA

Setting the Public Agenda for Online Health Search: A White Paper and Action Agenda

PubMed Central

D'Andrea, Guy; Lorence, Dan

2004-01-01

Background Searches for health information are among the most common reasons that consumers use the Internet. Both consumers and quality experts have raised concerns about the quality of information on the Web and the ability of consumers to find accurate information that meets their needs. Objective To produce a national stakeholder-driven agenda for research, technical improvements, and education that will improve the results of consumer searches for health information on the Internet. Methods URAC, a national accreditation organization, and Consumer WebWatch (CWW), a project of Consumers Union (a consumer advocacy organization), conducted a review of factors influencing the results of online health searches. The organizations convened two stakeholder groups of consumers, quality experts, search engine experts, researchers, health-care providers, informatics specialists, and others. Meeting participants reviewed existing information and developed recommendations for improving the results of online consumer searches for health information. Participants were not asked to vote on or endorse the recommendations. Our working definition of a quality Web site was one that contained accurate, reliable, and complete information. Results The Internet has greatly improved access to health information for consumers. There is great variation in how consumers seek information via the Internet, and in how successful they are in searching for health information. Further, there is variation among Web sites, both in quality and accessibility. Many Web site features affect the capability of search engines to find and index them. Conclusions Research is needed to define quality elements of Web sites that could be retrieved by search engines and understand how to meet the needs of different types of searchers. Technological research should seek to develop more sophisticated approaches for tagging information, and to develop searches that "learn" from consumer behavior. Finally, education initiatives are needed to help consumers search more effectively and to help them critically evaluate the information they find. PMID:15249267

Overview of an REU program: A case study in gender parity, ethnic diversity, and community college students

NASA Astrophysics Data System (ADS)

Pearson, J. K.; Noriega, G.; Benthien, M. L.

2017-12-01

The Undergraduate Studies in Earthquake Information Technology (USEIT) is an REU Internship Program focused in multi-disciplinary, collaborative research offered through the Southern California Earthquake Center (SCEC); a research consortium focused on earthquake science. USEIT is an 8-week intensive undergraduate research program. The program is designed for interns to work as a collaborative engine to solve an overarching real-world earthquake problem referred to as the "Grand Challenge". The interns are organized in teams and paired with mentors that have expertise in their specific task in the Grand Challenge. The program is focused around earthquake system science, where students have the opportunity to use super computers, programming platforms, geographic information systems, and internally designed and developed visualization software. The goal of the USEIT program is to motivate undergraduates from diverse backgrounds towards careers in science and engineering through team-based research in the field of earthquake information technology. Efforts are made to recruit students with diverse backgrounds, taking into consideration gender, ethnic background, socioeconomic standing, major, college year, and institution type (2-year and 4-year colleges). USEIT has a partnership with two local community colleges to recruit underserved students. Our emphasis is to attract students that would 1) grow and develop technical skills, soft skills, and confidence from the program, and 2) provide perspective and innovation to the program. USEIT offers on-campus housing to provide a submerged learning environment, recruits diverse majors to foster interdisciplinary collaboration, maintains a full time in lab mentor for day-to-day intern needs, takes students on field trips to provide context to their research, and plans activities and field trips for team building and morale. Each year metrics are collected through exit surveys, personal statements, and intern experience statements. We highlight lessons learned, including a need for pre-program engagement to ensure student success.

Djeen (Database for Joomla!’s Extensible Engine): a research information management system for flexible multi-technology project administration

PubMed Central

2013-01-01

Background With the advance of post-genomic technologies, the need for tools to manage large scale data in biology becomes more pressing. This involves annotating and storing data securely, as well as granting permissions flexibly with several technologies (all array types, flow cytometry, proteomics) for collaborative work and data sharing. This task is not easily achieved with most systems available today. Findings We developed Djeen (Database for Joomla!’s Extensible Engine), a new Research Information Management System (RIMS) for collaborative projects. Djeen is a user-friendly application, designed to streamline data storage and annotation collaboratively. Its database model, kept simple, is compliant with most technologies and allows storing and managing of heterogeneous data with the same system. Advanced permissions are managed through different roles. Templates allow Minimum Information (MI) compliance. Conclusion Djeen allows managing project associated with heterogeneous data types while enforcing annotation integrity and minimum information. Projects are managed within a hierarchy and user permissions are finely-grained for each project, user and group. Djeen Component source code (version 1.5.1) and installation documentation are available under CeCILL license from http://sourceforge.net/projects/djeen/files and supplementary material. PMID:23742665

The Impact of Search Engine Selection and Sorting Criteria on Vaccination Beliefs and Attitudes: Two Experiments Manipulating Google Output

PubMed Central

Schulz, Peter Johannes; Nakamoto, Kent

2014-01-01

Background During the past 2 decades, the Internet has evolved to become a necessity in our daily lives. The selection and sorting algorithms of search engines exert tremendous influence over the global spread of information and other communication processes. Objective This study is concerned with demonstrating the influence of selection and sorting/ranking criteria operating in search engines on users’ knowledge, beliefs, and attitudes of websites about vaccination. In particular, it is to compare the effects of search engines that deliver websites emphasizing on the pro side of vaccination with those focusing on the con side and with normal Google as a control group. Method We conducted 2 online experiments using manipulated search engines. A pilot study was to verify the existence of dangerous health literacy in connection with searching and using health information on the Internet by exploring the effect of 2 manipulated search engines that yielded either pro or con vaccination sites only, with a group receiving normal Google as control. A pre-post test design was used; participants were American marketing students enrolled in a study-abroad program in Lugano, Switzerland. The second experiment manipulated the search engine by applying different ratios of con versus pro vaccination webpages displayed in the search results. Participants were recruited from Amazon’s Mechanical Turk platform where it was published as a human intelligence task (HIT). Results Both experiments showed knowledge highest in the group offered only pro vaccination sites (Z=–2.088, P=.03; Kruskal-Wallis H test [H5]=11.30, P=.04). They acknowledged the importance/benefits (Z=–2.326, P=.02; H5=11.34, P=.04) and effectiveness (Z=–2.230, P=.03) of vaccination more, whereas groups offered antivaccination sites only showed increased concern about effects (Z=–2.582, P=.01; H5=16.88, P=.005) and harmful health outcomes (Z=–2.200, P=.02) of vaccination. Normal Google users perceived information quality to be positive despite a small effect on knowledge and a negative effect on their beliefs and attitudes toward vaccination and willingness to recommend the information (χ2 5=14.1, P=.01). More exposure to antivaccination websites lowered participants’ knowledge (J=4783.5, z=−2.142, P=.03) increased their fear of side effects (J=6496, z=2.724, P=.006), and lowered their acknowledgment of benefits (J=4805, z=–2.067, P=.03). Conclusion The selection and sorting/ranking criteria of search engines play a vital role in online health information seeking. Search engines delivering websites containing credible and evidence-based medical information impact positively Internet users seeking health information. Whereas sites retrieved by biased search engines create some opinion change in users. These effects are apparently independent of users’ site credibility and evaluation judgments. Users are affected beneficially or detrimentally but are unaware, suggesting they are not consciously perceptive of indicators that steer them toward the credible sources or away from the dangerous ones. In this sense, the online health information seeker is flying blind. PMID:24694866

WaveNet: A Web-Based Metocean Data Access, Processing, and Analysis Tool. Part 3 - CDIP Database

DTIC Science & Technology

2014-06-01

and Analysis Tool; Part 3 – CDIP Database by Zeki Demirbilek, Lihwa Lin, and Derek Wilson PURPOSE: This Coastal and Hydraulics Engineering...Technical Note (CHETN) describes coupling of the Coastal Data Information Program ( CDIP ) database to WaveNet, the first module of MetOcnDat (Meteorological...provides a step-by-step procedure to access, process, and analyze wave and wind data from the CDIP database. BACKGROUND: WaveNet addresses a basic

Development and operation of NEW-KOTIS : In-house technical information database of Nippon Kokan Corp.

NASA Astrophysics Data System (ADS)

Yagi, Yukio; Takahashi, Kaei

The purpose of this report is to describe how the activities for managing technical information has been and is now being conducted by the Engineering department of Nippon Kokan Corp. In addition, as a practical example of database generation promoted by the department, this book gives whole aspects of the NEW-KOTIS (background of its development, history, features, functional details, control and operation method, use in search operations, and so forth). The NEW-KOTIS (3rd-term system) is an "in-house technical information database system," which started its operation on May, 1987. This database system now contains approximately 65,000 information items (research reports, investigation reports, technical reports, etc.) generated within the company, and this information is available to anyone in any department through the network connecting all the company's structures.

Modelling of plug and play interface for energy router based on IEC61850

NASA Astrophysics Data System (ADS)

Shi, Y. F.; Yang, F.; Gan, L.; He, H. L.

2017-11-01

Under the background of the “Internet Plus”, as the energy internet infrastructure equipment, energy router will be widely developed. The IEC61850 standard is the only universal standard in the field of power system automation which realizes the standardization of engineering operation of intelligent substation. To eliminate the lack of International unified standard for communication of energy router, this paper proposes to apply IEC61850 to plug and play interface and establishes the plug and play interface information model and information transfer services. This paper provides a research approach for the establishment of energy router communication standards, and promotes the development of energy router.

An American knowledge base in England - Alternate implementations of an expert system flight status monitor

NASA Technical Reports Server (NTRS)

Butler, G. F.; Graves, A. T.; Disbrow, J. D.; Duke, E. L.

1989-01-01

A joint activity between the Dryden Flight Research Facility of the NASA Ames Research Center (Ames-Dryden) and the Royal Aerospace Establishment (RAE) on knowledge-based systems has been agreed. Under the agreement, a flight status monitor knowledge base developed at Ames-Dryden has been implemented using the real-time AI (artificial intelligence) toolkit MUSE, which was developed in the UK. Here, the background to the cooperation is described and the details of the flight status monitor and a prototype MUSE implementation are presented. It is noted that the capabilities of the expert-system flight status monitor to monitor data downlinked from the flight test aircraft and to generate information on the state and health of the system for the test engineers provides increased safety during flight testing of new systems. Furthermore, the expert-system flight status monitor provides the systems engineers with ready access to the large amount of information required to describe a complex aircraft system.

The repository-based software engineering program: Redefining AdaNET as a mainstream NASA source

NASA Technical Reports Server (NTRS)

1993-01-01

The Repository-based Software Engineering Program (RBSE) is described to inform and update senior NASA managers about the program. Background and historical perspective on software reuse and RBSE for NASA managers who may not be familiar with these topics are provided. The paper draws upon and updates information from the RBSE Concept Document, baselined by NASA Headquarters, Johnson Space Center, and the University of Houston - Clear Lake in April 1992. Several of NASA's software problems and what RBSE is now doing to address those problems are described. Also, next steps to be taken to derive greater benefit from this Congressionally-mandated program are provided. The section on next steps describes the need to work closely with other NASA software quality, technology transfer, and reuse activities and focuses on goals and objectives relative to this need. RBSE's role within NASA is addressed; however, there is also the potential for systematic transfer of technology outside of NASA in later stages of the RBSE program. This technology transfer is discussed briefly.

National Research Council Dialogue to Assess Progress on NASA's Systems Engineering Cost/Risk Analysis Capability Roadmap Development: General Background and Introduction

NASA Technical Reports Server (NTRS)

Regenie, Victoria

2005-01-01

Contents include the following: General Background and Introduction of Capability. Roadmaps for Systems Engineering Cost/Risk Analysis. Agency Objectives. Strategic Planning Transformation. Review Capability Roadmaps and Schedule. Review Purpose of NRC Review. Capability Roadmap Development (Progress to Date).

Engineering a Cause and Cure to Climate Change; Working a culture change with our Future Engineers.

NASA Astrophysics Data System (ADS)

Hudier, E. J. J.

2014-12-01

Where scientist unravel the laws of nature giving the human race the means to remodel their environment, engineers are the tools that put together the very technologies that give humans this power. Early on, along our first steps through this industrialization era, development was the key word, nature could digest our waste products no matter what. We have managed to tamper with our atmosphere's gas composition and the climate is slowly remodelling our way of life. Engineers are now expected to be a key part of the solution. Engineering programs have evolved to include new dimensions such as ethics, communication and environment. We want future engineers to put these dimensions first while working on new machine designs, concepts and procedures. As undergraduate students with a deep science background we also want them to be a source of information for their co-workers and more. How well are we getting through? How good teachers our future engineers will be? This work take a look at the teaching/learning successes comparing engineering students with students attending an undergraduate program in biology. Methods emphasizing the acquisition of knowledge through lectures and reading assignments are tested along with activities aiming at unraveling the scientific fundamental behind environmental issues and putting forward original solutions to specific problematic. Concept knowledge scores, communications' quality and activities evaluations by students are discussed.

Engineering education for the 1980's: A speculation

NASA Technical Reports Server (NTRS)

Covert, E. E.

1975-01-01

The development of a course of study is briefly examined from two points of view. The first represents the background that would seem to be needed for a fledgling engineer upon his entry into the engineering profession and would allow him to complete successfully his on-the-job training, or engineering internship as it were. The second represents that which must be provided on the basis of the students background from secondary school. It is suggested that a course of study viewed in this way is never fixed, but rather evolves continuously. A particular evolving course of study is briefly discussed.

Turbine Engine Diagnostics System Study

DTIC Science & Technology

1991-10-01

objective of this report. Tehnical pNW Decuanfmesln Page 1. Ropro. 1/ 2. ,ornm.o Acceosioa No. 3 . o.p.ifteCatalog Me. DOT/FAA/CT-91/16 4. Titeo en. depeI 0o...Safety Information Service, Springfield, Performance Virginia 22161 I9. seewrity Clossa. too *is ,pw#) 3 . 0 n4 .i. (*#A pop) ,g. 21. me. of eeoc...1. INTRODUCTION 1 2. BACKGROUND 2 3 . PHASE I TECHNICAL OBJECTIVES 4 4. SYSTEM SURVEY 7 4.1 Literature Search 7 4.2 Industry Survey 10 4.3 Technology

Catalog of Resources for Education in Ada (Trade Name) and Software Engineering (CREASE). Version 4.0.

DTIC Science & Technology

1986-05-01

offering the course is a company. Name and Address of offeror: Tachyon Corporation 2725 Congress Street Suite 2H San Diego, CA 92110 Offeror’s...Background: Tachyon Corporation specializes in Ada software quality assurance, computer hosted instruction and information retrieval systems, authoring tools...easy to use (on-line help) and can look up or search for terms. Tachyon Corporation 20 CDURSE OFFERINGS 2.2. Lecture/Seminar Courses 2.2.1. Company

Development Of Maneuvering Autopilot For Flight Tests

NASA Technical Reports Server (NTRS)

Menon, P. K. A.; Walker, R. A.

1992-01-01

Report describes recent efforts to develop automatic control system operating under supervision of pilot and making airplane follow prescribed trajectories during flight tests. Report represents additional progress on this project. Gives background information on technology of control of test-flight trajectories; presents mathematical models of airframe, engine and command-augmentation system; focuses on mathematical modeling of maneuvers; addresses design of autopilots for maneuvers; discusses numerical simulation and evaluation of results of simulation of eight maneuvers under control of simulated autopilot; and presents summary and discussion of future work.

Terrorism Information Sharing and the Nationwide Suspicious Activity Report Initiative: Background and Issues for Congress

DTIC Science & Technology

2009-11-05

December_23_2008_Final.pdf. 46 Ibid. 47 Federated search is the process of performing a simultaneous real-time search of multiple diverse and distributed...sources from a single search page, with the federated search engine acting as intermediary. See Sol Lederman, “A Federated Search Primer, Part II...at http://www.altsearchengines.com/2009/01/12/a- federated - search -primer-part-ii-of- iii/ 48 Examples of this controversy can be found at Alice

High-Fidelity Simulation in Biomedical and Aerospace Engineering

NASA Technical Reports Server (NTRS)

Kwak, Dochan

2005-01-01

Contents include the following: Introduction / Background. Modeling and Simulation Challenges in Aerospace Engineering. Modeling and Simulation Challenges in Biomedical Engineering. Digital Astronaut. Project Columbia. Summary and Discussion.

Hazards in the Solar System: Out-of-School Time Student Activities Focused on Engineering Protective Space Gloves

NASA Astrophysics Data System (ADS)

Vaughan, R. G.; Meyer, N.; Anderson, R. B.; Sokol, K.; Nolan, B.; Edgar, L. A.; Gaither, T. A.; Milazzo, M. P.; Clark, J.

2017-12-01

"In Good Hands: Engineering Space Gloves" is a new Engineering Adventures® curriculum unit created for students in grades 3-5 in out-of-school time programs. It was designed and created by the Engineering is Elementary® team at the Museum of Science in Boston, MA, in collaboration with subject matter experts at the USGS Astrogeology Science Center and teacher professional development experts at Northern Arizona University's Center for Science Teaching and Learning. As part of the NASA-funded PLANETS (Planetary Learning that Advances the Nexus of Engineering, Technology, and Science) project, the goals for this unit are to introduce students to some of the potential hazards that would be faced by astronauts exploring planetary bodies in the solar system, and to engage students in thinking about how to engineer solutions to these challenges. Potential human health hazards in planetary exploration include: little to no breathable oxygen, exposure to extreme temperatures and pressures, radiation, dusty or toxic environments, and/or high velocity debris. First, students experiment with gloves made of different materials to accomplish tasks like picking up paper clips, entering numbers on a calculator, and using simple tools, while also testing for insulating properties, protection from crushing forces, and resistance to dust contamination. Students explore the trade-offs between form and multiple desired functions, and gain an introduction to materials engineering. Students are then presented with three different missions. Mission 1 is to collect and return a sample from Saturn's moon, Titan; Mission 2 is mining asteroids for useful minerals; and Mission 3 is to build a radio tower on the far side of Earth's moon. Each of these missions exhibits different potential hazards. Based on their previous experiments with different types of glove materials, students develop and test glove designs that will protect astronauts from mission-specific hazards, while still retaining basic dexterity and functionality. Educators are given background information and links to in-depth descriptions of the science content, and students are guided through the engineering design process as well as given scientific background on hazards in the solar system in a fun and engaging series of activities.

Bat-Inspired Algorithm Based Query Expansion for Medical Web Information Retrieval.

PubMed

Khennak, Ilyes; Drias, Habiba

2017-02-01

With the increasing amount of medical data available on the Web, looking for health information has become one of the most widely searched topics on the Internet. Patients and people of several backgrounds are now using Web search engines to acquire medical information, including information about a specific disease, medical treatment or professional advice. Nonetheless, due to a lack of medical knowledge, many laypeople have difficulties in forming appropriate queries to articulate their inquiries, which deem their search queries to be imprecise due the use of unclear keywords. The use of these ambiguous and vague queries to describe the patients' needs has resulted in a failure of Web search engines to retrieve accurate and relevant information. One of the most natural and promising method to overcome this drawback is Query Expansion. In this paper, an original approach based on Bat Algorithm is proposed to improve the retrieval effectiveness of query expansion in medical field. In contrast to the existing literature, the proposed approach uses Bat Algorithm to find the best expanded query among a set of expanded query candidates, while maintaining low computational complexity. Moreover, this new approach allows the determination of the length of the expanded query empirically. Numerical results on MEDLINE, the on-line medical information database, show that the proposed approach is more effective and efficient compared to the baseline.

Will China be the first to initiate climate engineering?

NASA Astrophysics Data System (ADS)

Moore, John C.; Chen, Ying; Cui, Xuefeng; Yuan, Wenping; Dong, Wenjie; Gao, Yun; Shi, Peijun

2016-12-01

Over the last 30 years, China has industrialized more rapidly than any other society in history and become the world's largest emitter of CO2. This has demonstrated unprecedented ability to change the socioeconomic landscape, produced great wealth, and led to some catastrophic environmental damage. This is the background that has motivated several authors to postulate that China would initiate geoengineering using solar radiation management. But will China be the first to pioneer climate engineering? The answer, we argue here, is likely to be "no!" We reach this conclusion from an analysis of the historic philosophical tradition that informs the Chinese world view, China's experience of mega-engineering projects both ancient and modern, and the policies implemented over the last 60 years. The debate on geoengineering has to-date been almost exclusively Euro-American, but China has mega-engineering experience, huge resources, and a radically different world-view that needs to be acknowledged. Furthermore we contend that these experiences can be useful internationally in helping to frame the debate on climate mitigation from the perspective of the earth as shared, multiuse and finite.

Effect of Operating Conditions and Design on Afterburner Performance

NASA Technical Reports Server (NTRS)

Fleming, W. A.; Gabriel, D. S.; Lundin, B. T.

1956-01-01

Afterburners for turbojet engines have, within the past decade, found increasing application in service aircraft. Practically all engines manufactured today are equipped with some form of afterburner, and its use has increased from what was originally a short-period thrust-augmentation application to an essential feature of the turbojet propulsion system for flight at supersonic speeds. The design of these afterburners has been based on extensive research and development effort in expanded laboratory facilities by both the NACA and the American engine industry. Most of the work of the engine industry, however, has either not been published or is not generally available owing to its proprietary nature. Consequently, the main bulk of research information available for summary and discussion is of NACA origin. However, because industrial afterburner development has closely followed NACA research, the omission is more one of technical detail than method or concept. One principal difficulty encountered in summarizing the work in this field is that sufficient knowledge does not yet exist to rationally or directly integrate the available background of basic combustion principles into combustor design. A further difficulty is that most of the experimental investigations that have been conducted were directed chiefly toward the development of specific afterburners for various engines rather than to the accumulation of systematic data. This work has, nonetheless, provided not only substantial improvements in the performance of afterburners but also a large fund of experimental data and an extensive background of experience in the field. Consequently, it is the purpose of the present chapter to summarize the many, and frequently unrelated, experimental investigations that have been conducted rather than to formulate a set of design rules. In the treatment of this material an effort has been made, however, to convey to the reader the "know how" acquired by research engineers in the course of afterburner studies.

DETAIL VIEW OF WINCHING ENGINE LOCATED AT THE UPPER TRAM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL VIEW OF WINCHING ENGINE LOCATED AT THE UPPER TRAM TERMINAL, LOOKING NORTHEAST. THE CABLE FROM THIS ENGINE LEADS DOWN INTO THE DEEP RAVINE IN FRONT OF THE UPPER TRAM TERMINAL. IT WAS PROBABLY USED TO DRAG MATERIALS UP TOWARD THE TERMINAL WHEN THE TERMINAL WAS BEING CONSTRUCTED, OR IN TIMES OF TRAMWAY BREAKDOWN. THE DRIVE ENGINE IS IN THE BACKGROUND. TWO LONG OPERATING LEVERS FOR THE ENGINE ARE IN THE CENTER FOREGROUND. AN EXTRA SPOOL OF CABLE IS ON THE GROUND TO THE RIGHT OF THE ENGINE. A WATER PIPELINE STRETCHES ACROSS THE SLOPE IN THE BACKGROUND, CARRYING WATER TO THE UPPER MINES. SEE CA-291-37 FOR IDENTICAL B&W NEGATIVE. - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA

DETAIL VIEW OF WINCHING ENGINE LOCATED AT THE UPPER TRAM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL VIEW OF WINCHING ENGINE LOCATED AT THE UPPER TRAM TERMINAL LOOKING NORTHEAST. THE CABLE FROM THIS ENGINE LEADS DOWN INTO THE DEEP RAVINE IN FRONT OF THE UPPER TRAM TERMINAL. IT WAS PROBABLY USED TO DRAG MATERIALS UP TOWARD THE TERMINAL WHEN THE TERMINAL WAS BEING CONSTRUCTED, OR IN TIMES OF TRAMWAY BREAK DOWN. THE DRIVE ENGINE IS IN THE BACKGROUND. TWO LONG OPERATING LEVERS FOR THE ENGINE ARE IN THE CENTER FOREGROUND. AN EXTRA SPOOL OF CABLE IS ON THE GROUND TO THE RIGHT OF THE ENGINE. A WATER PIPELINE STRETCHES ACROSS THE SLOPE IN THE BACKGROUND, CARRYING WATER TO THE UPPER MINES. SEE CA-291-52 (CT) FOR IDENTICAL COLOR TRANSPARENCY. - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA

Tissue engineered constructs for peripheral nerve surgery

PubMed Central

Johnson, P. J.; Wood, M. D.; Moore, A. M.; Mackinnon, S. E.

2013-01-01

Summary Background Tissue engineering has been defined as “an interdisciplinary field that applies the principles of engineering and life sciences toward the development of biological substitutes that restore, maintain, or improve tissue function or a whole organ”. Traumatic peripheral nerve injury resulting in significant tissue loss at the zone of injury necessitates the need for a bridge or scaffold for regenerating axons from the proximal stump to reach the distal stump. Methods A review of the literature was used to provide information on the components necessary for the development of a tissue engineered peripheral nerve substitute. Then, a comprehensive review of the literature is presented composed of the studies devoted to this goal. Results Extensive research has been directed toward the development of a tissue engineered peripheral nerve substitute to act as a bridge for regenerating axons from the proximal nerve stump seeking the distal nerve. Ideally this nerve substitute would consist of a scaffold component that mimics the extracellular matrix of the peripheral nerve and a cellular component that serves to stimulate and support regenerating peripheral nerve axons. Conclusions The field of tissue engineering should consider its challenge to not only meet the autograft “gold standard” but also to understand what drives and inhibits nerve regeneration in order to surpass the results of an autograft. PMID:24385980

Tool for Constructing Data Albums for Significant Weather Events

NASA Astrophysics Data System (ADS)

Kulkarni, A.; Ramachandran, R.; Conover, H.; McEniry, M.; Goodman, H.; Zavodsky, B. T.; Braun, S. A.; Wilson, B. D.

2012-12-01

Case study analysis and climatology studies are common approaches used in Atmospheric Science research. Research based on case studies involves a detailed description of specific weather events using data from different sources, to characterize physical processes in play for a given event. Climatology-based research tends to focus on the representativeness of a given event, by studying the characteristics and distribution of a large number of events. To gather relevant data and information for case studies and climatology analysis is tedious and time consuming; current Earth Science data systems are not suited to assemble multi-instrument, multi mission datasets around specific events. For example, in hurricane science, finding airborne or satellite data relevant to a given storm requires searching through web pages and data archives. Background information related to damages, deaths, and injuries requires extensive online searches for news reports and official storm summaries. We will present a knowledge synthesis engine to create curated "Data Albums" to support case study analysis and climatology studies. The technological challenges in building such a reusable and scalable knowledge synthesis engine are several. First, how to encode domain knowledge in a machine usable form? This knowledge must capture what information and data resources are relevant and the semantic relationships between the various fragments of information and data. Second, how to extract semantic information from various heterogeneous sources including unstructured texts using the encoded knowledge? Finally, how to design a structured database from the encoded knowledge to store all information and to support querying? The structured database must allow both knowledge overviews of an event as well as drill down capability needed for detailed analysis. An application ontology driven framework is being used to design the knowledge synthesis engine. The knowledge synthesis engine is being applied to build a portal for hurricane case studies at the Global Hydrology and Resource Center (GHRC), a NASA Data Center. This portal will auto-generate Data Albums for specific hurricane events, compiling information from distributed resources such as NASA field campaign collections, relevant data sets, storm reports, pictures, videos and other useful sources.

An exploratory investigation of teaching innovations and learning factors in a lean manufacturing systems engineering course

NASA Astrophysics Data System (ADS)

Choomlucksana, Juthamas; Doolen, Toni L.

2017-11-01

The use of collaborative activities and simulation sessions in engineering education has been explored previously. However, few studies have investigated the relationship of these types of teaching innovations with other learner characteristics, such as self-efficacy and background knowledge. This study explored the effects of collaborative activities and simulation sessions on learning and the relationships between self-efficacy beliefs, background knowledge, and learning. Data were collected from two different terms in an upper division engineering course entitled Lean Manufacturing Systems Engineering. Findings indicated that the impact of collaborative activities and simulation sessions appears to be different, depending on the concepts being taught. Simulation sessions were found to have a significant effect on self-efficacy beliefs, and background knowledge had a mixed effect on learning. Overall the results of this study highlight the complex set of relationships between classroom innovations, learner characteristics, and learning.

Engineering Background: Modern Formats and Challenges of Conceptual Engineering

NASA Astrophysics Data System (ADS)

Khamidullina, A. F.; Kuzmina, M. A.; Khusnutdinova, E. M.; Konakhina, I. A.

2017-09-01

This paper describes the analysis of problems and development perspectives of engineering education in our and other countries. Special attention is given to modern formats of education that motivate creative efforts of engineers-to-be as well as issues of conceptual engineering taking the challenges of modernity into account.

Developing a state water plan: Ground-water conditions in Utah, spring of 1964

USGS Publications Warehouse

Arnow, Ted; Butler, R.G.; Mower, R.W.; Gates, Joseph S.; Cordova, R.M.; Carpenter, C.H.; Bjorklund, L.J.; Feltis, R.D.; Robinson, G.B. Jr.; Sandberg, G.W.

1964-01-01

This report is the first in a series of annual reports which will describe ground-water conditions in Utah. It was prepared cooperatively by the U.S. Geological Survey and the Utah Water and Power Board and was designed to provide the data for interested parties, such as legislators, administrators, and planners to keep abreast of changing ground-water conditions in the state. Because this report is the first of the series, it necessarily includes certain background and descriptive information which gives a broad general picture of ground-water conditions. Subsequent reports will discuss only changes that have taken place during the previous year.Many of the data used in the preparation of the report were collected by the Geological Survey in cooperation with the Utah State Engineer during past and continuing programs. The well-location map and some statistical information about numbers of wells in the State were prepared by digital computer from the Utah Resources Information System, University of Utah, utilizing records which were compiled largely from the files of the Utah State Engineer. R.E. Marsell, geological consultant to the Utah Water and Power Board, first suggested that this report be prepared.

Genetically Engineered ERα positive breast cancer mouse models

PubMed Central

Dabydeen, Sarah A.; Furth, Priscilla A.

2014-01-01

The majority of human breast cancers are ER+ but this has proven challenging to model in genetically engineered mice. This review summarizes information on twenty-one mouse models that develop ER+ mammary cancer. Where available, information on cancer pathology and gene expression profiles is referenced to assist in understanding which histological subtype of ER+ human cancer each model might represent. Esr1, Ccdn1, prolactin, TGFα, AIB1, Espl1, and Wnt1 over-expression, Pik3ca gain of function, as well as loss of p53 or loss of Stat1 are associated with ER+ mammary cancer. Treatment with the PPARγ agonist efatutazone in a mouse with Brca1 and p53 deficiency and DMBA exposure in combination with an activated myristoylated form of AKT1 also induce ER+ mammary cancer. A spontaneous mutant in nude mice that develops metastatic ER+ mammary cancer is included. Age of cancer development ranges from three to 26 months and the percentages of cancers that are ER+ vary from 21% to 100%. Not all models are characterized as to their estrogen dependency and/or response to anti-hormonal therapy. Strain backgrounds include C57Bl/6, FVB, BALB/c, 129S6/SvEv, CB6F1 and NIH nude. Most models have only been studied on one strain background. In summary while a range of models is available for studies of pathogenesis and therapy of ER+ breast cancers, many could benefit from further characterization and opportunity for development of new models remains. PMID:24481326

Selected Readings in Genetic Engineering

ERIC Educational Resources Information Center

Mertens, Thomas R.; Robinson, Sandra K.

1973-01-01

Describes different sources of readings for understanding issues and concepts of genetic engineering. Broad categories of reading materials are: concerns about genetic engineering; its background; procedures; and social, ethical and legal issues. References are listed. (PS)

Photoelectric professional students in common universities cultivate way to explore under the background of professional certification

NASA Astrophysics Data System (ADS)

Sun, Yan-jun; Wang, Li; Leng, Yan-bing

2017-08-01

In view of the engineering education professional certification of specialty construction and the specific requirements of the training system, combining with our school optoelectronic information science and engineering characteristics, analysis of the optoelectronic information science and engineering in our school problems and challenges, to locate the specific professional training objectives. From the service oriented industry demand for talent ability, at the same time, according to the ministry of education professional norms of the development of the photoelectric teaching steering committee, and the professional development and the characteristics of target, to build a set to conform to the goal of cultivating the professional curriculum system. At the same time set up a from fundamental to professional practice teaching system, covers the course experiment, course design, case teaching, comprehensive training, such as graduation design practice. Which implements a whole ability training from the practice of foundation to high-end chain, embodies the training goal emphasize "outstanding practical skills, quality education is distinct culture characteristic. By further speed up the professional construction, professional certification standards to standardize our training process, improved the level of professional training, and improve the comprehensive quality of the graduates and talent of social competitiveness, fostered more professional talents for the country.

A background correction algorithm for Van Allen Probes MagEIS electron flux measurements

DOE PAGES

Claudepierre, S. G.; O'Brien, T. P.; Blake, J. B.; ...

2015-07-14

We describe an automated computer algorithm designed to remove background contamination from the Van Allen Probes Magnetic Electron Ion Spectrometer (MagEIS) electron flux measurements. We provide a detailed description of the algorithm with illustrative examples from on-orbit data. We find two primary sources of background contamination in the MagEIS electron data: inner zone protons and bremsstrahlung X-rays generated by energetic electrons interacting with the spacecraft material. Bremsstrahlung X-rays primarily produce contamination in the lower energy MagEIS electron channels (~30–500 keV) and in regions of geospace where multi-M eV electrons are present. Inner zone protons produce contamination in all MagEIS energymore » channels at roughly L < 2.5. The background-corrected MagEIS electron data produce a more accurate measurement of the electron radiation belts, as most earlier measurements suffer from unquantifiable and uncorrectable contamination in this harsh region of the near-Earth space environment. These background-corrected data will also be useful for spacecraft engineering purposes, providing ground truth for the near-Earth electron environment and informing the next generation of spacecraft design models (e.g., AE9).« less

The Effect of Integrating Lab Experiments in Electronic Circuits into Mathematic Studies--A Case Study

ERIC Educational Resources Information Center

Sabag, Nissim

2017-01-01

Background: The importance of knowledge and skills in mathematics for electrical engineering students is well known. Engineers and engineering educators agree that any engineering curriculum must include plenty of mathematics studies to enrich the engineer's toolbox. Nevertheless, little attention has been given to the possible contribution of…

Comparison of Four Search Engines and their efficacy With Emphasis on Literature Research in Addiction (Prevention and Treatment)

PubMed Central

Samadzadeh, Gholam Reza; Rigi, Tahereh; Ganjali, Ali Reza

2013-01-01

Background Surveying valuable and most recent information from internet, has become vital for researchers and scholars, because every day, thousands and perhaps millions of scientific works are brought out as digital resources which represented by internet and researchers can’t ignore this great resource to find related documents for their literature search, which may not be found in any library. With regard to variety of documents presented on the internet, search engines are one of the most effective search tools for finding information. Objectives The aim of this study is to evaluate the three criteria, recall, preciseness and importance of the four search engines which are PubMed, Science Direct, Google Scholar and federated search of Iranian National Medical Digital Library in addiction (prevention and treatment) to select the most effective search engine for offering the best literature research. Materials and Methods This research was a cross-sectional study by which four popular search engines in medical sciences were evaluated. To select keywords, medical subject heading (Mesh) was used. We entered given keywords in the search engines and after searching, 10 first entries were evaluated. Direct observation was used as a mean for data collection and they were analyzed by descriptive statistics (number, percent number and mean) and inferential statistics, One way analysis of variance (ANOVA) and post hoc Tukey in Spss. 15 statistical software. P Value < 0.05 was considered statistically significant. Results Results have shown that the search engines had different operations with regard to the evaluated criteria. Since P Value was 0.004 < 0.05 for preciseness and was 0.002 < 0.05 for importance, it shows significant difference among search engines. PubMed, Science Direct and Google Scholar were the best in recall, preciseness and importance respectively. Conclusions As literature research is one of the most important stages of research, it's better for researchers, especially Substance-Related Disorders scholars to use different search engines with the best recall, preciseness and importance in that subject field to reach desirable results while searching and they don’t depend on just one search engine. PMID:24971257

Adolescents Searching for Health Information on the Internet: An Observational Study

PubMed Central

Derry, Holly A; Resnick, Paul J; Richardson, Caroline R

2003-01-01

Background Adolescents' access to health information on the Internet is partly a function of their ability to search for and find answers to their health-related questions. Adolescents may have unique health and computer literacy needs. Although many surveys, interviews, and focus groups have been utilized to understand the information-seeking and information-retrieval behavior of adolescents looking for health information online, we were unable to locate observations of individual adolescents that have been conducted in this context. Objective This study was designed to understand how adolescents search for health information using the Internet and what implications this may have on access to health information. Methods A convenience sample of 12 students (age 12-17 years) from 1 middle school and 2 high schools in southeast Michigan were provided with 6 health-related questions and asked to look for answers using the Internet. Researchers recorded 68 specific searches using software that captured screen images as well as synchronized audio recordings. Recordings were reviewed later and specific search techniques and strategies were coded. A qualitative review of the verbal communication was also performed. Results Out of 68 observed searches, 47 (69%) were successful in that the adolescent found a correct and useful answer to the health question. The majority of sites that students attempted to access were retrieved directly from search engine results (77%) or a search engine's recommended links (10%); only a small percentage were directly accessed (5%) or linked from another site (7%). The majority (83%) of followed links from search engine results came from the first 9 results. Incorrect spelling (30 of 132 search terms), number of pages visited within a site (ranging from 1-15), and overall search strategy (eg, using a search engine versus directly accessing a site), were each important determinants of success. Qualitative analysis revealed that participants used a trial-and-error approach to formulate search strings, scanned pages randomly instead of systematically, and did not consider the source of the content when searching for health information. Conclusions This study provides a useful snapshot of current adolescent searching patterns. The results have implications for constructing realistic simulations of adolescent search behavior, improving distribution and usefulness of Web sites with health information relevant to adolescents, and enhancing educators' knowledge of what specific pitfalls students are likely to encounter. PMID:14713653

Principles of Naval Engineering.

ERIC Educational Resources Information Center

Naval Personnel Program Support Activity, Washington, DC.

Fundamentals of shipboard machinery, equipment, and engineering plants are presented in this text prepared for engineering officers. A general description is included of the development of naval ships, ship design and construction, stability and buoyancy, and damage and casualty control. Engineering theories are explained on the background of ship…

Engineered cell-cell communication via DNA messaging

PubMed Central

2012-01-01

Background Evolution has selected for organisms that benefit from genetically encoded cell-cell communication. Engineers have begun to repurpose elements of natural communication systems to realize programmed pattern formation and coordinate other population-level behaviors. However, existing engineered systems rely on system-specific small molecules to send molecular messages among cells. Thus, the information transmission capacity of current engineered biological communication systems is physically limited by specific biomolecules that are capable of sending only a single message, typically “regulate transcription.” Results We have engineered a cell-cell communication platform using bacteriophage M13 gene products to autonomously package and deliver heterologous DNA messages of varying lengths and encoded functions. We demonstrate the decoupling of messages from a common communication channel via the autonomous transmission of various arbitrary genetic messages. Further, we increase the range of engineered DNA messaging across semisolid media by linking message transmission or receipt to active cellular chemotaxis. Conclusions We demonstrate decoupling of a communication channel from message transmission within engineered biological systems via the autonomous targeted transduction of user-specified heterologous DNA messages. We also demonstrate that bacteriophage M13 particle production and message transduction occurs among chemotactic bacteria. We use chemotaxis to improve the range of DNA messaging, increasing both transmission distance and communication bit rates relative to existing small molecule-based communication systems. We postulate that integration of different engineered cell-cell communication platforms will allow for more complex spatial programming of dynamic cellular consortia. PMID:22958599

Living microorganisms change the information (Shannon) content of a geophysical system.

PubMed

Tang, Fiona H M; Maggi, Federico

2017-06-12

The detection of microbial colonization in geophysical systems is becoming of interest in various disciplines of Earth and planetary sciences, including microbial ecology, biogeochemistry, geomicrobiology, and astrobiology. Microorganisms are often observed to colonize mineral surfaces, modify the reactivity of minerals either through the attachment of their own biomass or the glueing of mineral particles with their mucilaginous metabolites, and alter both the physical and chemical components of a geophysical system. Here, we hypothesise that microorganisms engineer their habitat, causing a substantial change to the information content embedded in geophysical measures (e.g., particle size and space-filling capacity). After proving this hypothesis, we introduce and test a systematic method that exploits this change in information content to detect microbial colonization in geophysical systems. Effectiveness and robustness of this method are tested using a mineral sediment suspension as a model geophysical system; tests are carried out against 105 experiments conducted with different suspension types (i.e., pure mineral and microbially-colonized) subject to different abiotic conditions, including various nutrient and mineral concentrations, and different background entropy production rates. Results reveal that this method can systematically detect microbial colonization with less than 10% error in geophysical systems with low-entropy background production rate.

Methods for evaluating potential sources of chloride in surface waters and groundwaters of the conterminous United States

USGS Publications Warehouse

Granato, Gregory E.; DeSimone, Leslie A.; Barbaro, Jeffrey R.; Jeznach, Lillian C.

2015-09-04

Scientists, engineers, regulators, and decisionmakers need information about potential sources of chloride, water and solute budgets, and methods for collecting water-quality data to help identify potential sources. This information is needed to evaluate potential sources of chloride in areas where chloride may have adverse ecological effects or may degrade water supplies used for drinking water, agriculture, or industry. Knowledge of potential sources will help decisionmakers identify the best mitigation measures to reduce the total background chloride load, thereby reducing the potential for water-quality exceedances that occur because of superposition on rising background concentrations. Also, knowledge of potential sources may help decisionmakers identify the potential for the presence of contaminants that have toxic, carcinogenic, mutagenic, or endocrine-disrupting effects at concentrations that are lower by orders of magnitude than the chloride concentrations in the source water. This report is a comprehensive synthesis of relevant information, but it is not the result of an exhaustive search for literature on each topic. The potential adverse effects of chloride on infrastructure and the environment are not discussed in this report because these issues have been extensively documented elsewhere.

A Method for the Design and Development of Medical or Health Care Information Websites to Optimize Search Engine Results Page Rankings on Google

PubMed Central

Cummins, Niamh Maria; Hannigan, Ailish; Shannon, Bill; Dunne, Colum; Cullen, Walter

2013-01-01

Background The Internet is a widely used source of information for patients searching for medical/health care information. While many studies have assessed existing medical/health care information on the Internet, relatively few have examined methods for design and delivery of such websites, particularly those aimed at the general public. Objective This study describes a method of evaluating material for new medical/health care websites, or for assessing those already in existence, which is correlated with higher rankings on Google's Search Engine Results Pages (SERPs). Methods A website quality assessment (WQA) tool was developed using criteria related to the quality of the information to be contained in the website in addition to an assessment of the readability of the text. This was retrospectively applied to assess existing websites that provide information about generic medicines. The reproducibility of the WQA tool and its predictive validity were assessed in this study. Results The WQA tool demonstrated very high reproducibility (intraclass correlation coefficient=0.95) between 2 independent users. A moderate to strong correlation was found between WQA scores and rankings on Google SERPs. Analogous correlations were seen between rankings and readability of websites as determined by Flesch Reading Ease and Flesch-Kincaid Grade Level scores. Conclusions The use of the WQA tool developed in this study is recommended as part of the design phase of a medical or health care information provision website, along with assessment of readability of the material to be used. This may ensure that the website performs better on Google searches. The tool can also be used retrospectively to make improvements to existing websites, thus, potentially enabling better Google search result positions without incurring the costs associated with Search Engine Optimization (SEO) professionals or paid promotion. PMID:23981848

77 FR 53802 - Procurement, Management, and Administration of Engineering and Design Related Services

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-04

...-2012-0043] RIN 2125-AF44 Procurement, Management, and Administration of Engineering and Design Related... regulations governing the procurement, management, and administration of engineering and design related... . Background The FHWA proposes to modify existing regulations for the administration of engineering and design...

Effects of Professional Development on Infusing Engineering Design into High School Science, Technology, Engineering, and Math (STEM) Curricula

ERIC Educational Resources Information Center

Avery, Zanj Kano

2010-01-01

The purpose of this study was to examine the effects of professional development (PD) on the infusion of engineering design into high school curricula. Four inservice teachers with backgrounds in physics, chemistry, industrial education, math, and electrical engineering participated in the 2006 National Center of Engineering and Technology…

37. ENGINE ROOM, FROM PORT SIDE OF CONTROL CONSOLE, LOOKING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

37. ENGINE ROOM, FROM PORT SIDE OF CONTROL CONSOLE, LOOKING TOWARDS STERN, PORT ENGINE AT RIGHT, STARBOARD ENGINE AT LEFT, BOTH ARE DIESEL ENGINES, IN BACKGROUND IS STAIRS UP TO CREWS' BERTHING, BEYONE THE STAIRS IS THE DOOR TO AFT ENGINE ROOM & MACHINE SHOP. - U.S. Coast Guard Cutter WHITE HEATH, USGS Integrated Support Command Boston, 427 Commercial Street, Boston, Suffolk County, MA

15. INTERIOR OF ENGINE ROOM, CONTAINING MESTACORLISS CROSSCOMPOUND ENGINE, FOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. INTERIOR OF ENGINE ROOM, CONTAINING MESTA-CORLISS CROSS-COMPOUND ENGINE, FOR 40" BLOOMING MILL. THIS VIEW IS TAKEN FROM THE HIGH-PRESSURE SIDE OF THE ENGINE SHOWING THE HOUSING EXTENSION; TO THE RIGHT, IN THE BACKGROUND, IS THE 24' CAST-IRON FLYWHEEL. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

Some propulsion system noise data handling conventions and computer programs used at the Lewis Research Center

NASA Technical Reports Server (NTRS)

Montegani, F. J.

1974-01-01

Methods of handling one-third-octave band noise data originating from the outdoor full-scale fan noise facility and the engine acoustic facility at the Lewis Research Center are presented. Procedures for standardizing, retrieving, extrapolating, and reporting these data are explained. Computer programs are given which are used to accomplish these and other noise data analysis tasks. This information is useful as background for interpretation of data from these facilities appearing in NASA reports and can aid data exchange by promoting standardization.

KC-135 and Other Microgravity Simulations

NASA Technical Reports Server (NTRS)

2005-01-01

This document represents a summary of medical and scientific evaluations conducted aboard the KC-135 from June 23, 2004 to June 27, 2005. Included is a general overview of KC-135 activities manifested and coordinated by the Human Adaptation and Countermeasures Office. A collection of brief reports that describe tests conducted aboard the KC-135 follows the overview. Principal investigators and test engineers contributed significantly to the content of the report describing their particular experiment or hardware evaluation. This document concludes with an appendix that provides background information concerning the KC-135 and the Reduced-Gravity Program.

40 CFR 1065.667 - Dilution air background emission correction.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.667 Dilution air background emission correction. (a) To determine the mass of background emissions to subtract... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Dilution air background emission...

40 CFR 1065.667 - Dilution air background emission correction.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.667 Dilution air background emission correction. (a) To determine the mass of background emissions to subtract... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Dilution air background emission...

40 CFR 1065.667 - Dilution air background emission correction.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.667 Dilution air background emission correction. (a) To determine the mass of background emissions to subtract... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Dilution air background emission...

40 CFR 1065.667 - Dilution air background emission correction.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.667 Dilution air background emission correction. (a) To determine the mass of background emissions to subtract... 40 Protection of Environment 33 2011-07-01 2011-07-01 false Dilution air background emission...

40 CFR 1065.667 - Dilution air background emission correction.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calculations and Data Requirements § 1065.667 Dilution air background emission correction. (a) To determine the mass of background emissions to subtract... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Dilution air background emission...

Sagace: A web-based search engine for biomedical databases in Japan

PubMed Central

2012-01-01

Background In the big data era, biomedical research continues to generate a large amount of data, and the generated information is often stored in a database and made publicly available. Although combining data from multiple databases should accelerate further studies, the current number of life sciences databases is too large to grasp features and contents of each database. Findings We have developed Sagace, a web-based search engine that enables users to retrieve information from a range of biological databases (such as gene expression profiles and proteomics data) and biological resource banks (such as mouse models of disease and cell lines). With Sagace, users can search more than 300 databases in Japan. Sagace offers features tailored to biomedical research, including manually tuned ranking, a faceted navigation to refine search results, and rich snippets constructed with retrieved metadata for each database entry. Conclusions Sagace will be valuable for experts who are involved in biomedical research and drug development in both academia and industry. Sagace is freely available at http://sagace.nibio.go.jp/en/. PMID:23110816

Expression of an (Engineered) 4,6-α-Glucanotransferase in Potato Results in Changes in Starch Characteristics

PubMed Central

Xu, Xuan; Dechesne, Annemarie; Visser, Richard G. F.; Trindade, Luisa M.

2016-01-01

Starch structure strongly influences starch physicochemical properties, determining the end uses of starch in various applications. To produce starches with novel structure and exploit the mechanism of starch granule formation, an (engineered) 4, 6-α-glucanotransferase (GTFB) from Lactobacillus reuteri 121 was introduced into two potato genetic backgrounds: amylose-containing line Kardal and amylose-free mutant amf. The resulting starches showed severe changes in granule morphology regardless of genetic backgrounds. Modified starches from amf background exhibited a significant increase in granule size and starch phosphate content relative to the control, while starches from Kardal background displayed a higher digestibility, but did not show changes in granule size and phosphate content. Transcriptome analysis revealed the existence of a mechanism to restore the regular packing of double helices in starch granules, which possibly resulted in the removal of novel glucose chains potentially introduced by the (engineered) GTFB. This amendment mechanics would also explain the difficulties to detect alterations in starch fine structure in the transgenic lines. PMID:27911907

Expression of an (Engineered) 4,6-α-Glucanotransferase in Potato Results in Changes in Starch Characteristics.

PubMed

Xu, Xuan; Dechesne, Annemarie; Visser, Richard G F; Trindade, Luisa M

2016-01-01

Starch structure strongly influences starch physicochemical properties, determining the end uses of starch in various applications. To produce starches with novel structure and exploit the mechanism of starch granule formation, an (engineered) 4, 6-α-glucanotransferase (GTFB) from Lactobacillus reuteri 121 was introduced into two potato genetic backgrounds: amylose-containing line Kardal and amylose-free mutant amf. The resulting starches showed severe changes in granule morphology regardless of genetic backgrounds. Modified starches from amf background exhibited a significant increase in granule size and starch phosphate content relative to the control, while starches from Kardal background displayed a higher digestibility, but did not show changes in granule size and phosphate content. Transcriptome analysis revealed the existence of a mechanism to restore the regular packing of double helices in starch granules, which possibly resulted in the removal of novel glucose chains potentially introduced by the (engineered) GTFB. This amendment mechanics would also explain the difficulties to detect alterations in starch fine structure in the transgenic lines.

Specialized medical search-engines are no better than general search-engines in sourcing consumer information about androgen deficiency.

PubMed

Ilic, D; Bessell, T L; Silagy, C A; Green, S

2003-03-01

The Internet provides consumers with access to online health information; however, identifying relevant and valid information can be problematic. Our objectives were firstly to investigate the efficiency of search-engines, and then to assess the quality of online information pertaining to androgen deficiency in the ageing male (ADAM). Keyword searches were performed on nine search-engines (four general and five medical) to identify website information regarding ADAM. Search-engine efficiency was compared by percentage of relevant websites obtained via each search-engine. The quality of information published on each website was assessed using the DISCERN rating tool. Of 4927 websites searched, 47 (1.44%) and 10 (0.60%) relevant websites were identified by general and medical search-engines respectively. The overall quality of online information on ADAM was poor. The quality of websites retrieved using medical search-engines did not differ significantly from those retrieved by general search-engines. Despite the poor quality of online information relating to ADAM, it is evident that medical search-engines are no better than general search-engines in sourcing consumer information relevant to ADAM.

An Examination of the Selection Criteria Used in the Architect-Engineer Selection Process of Air Force Base Civil Engineers.

DTIC Science & Technology

1987-09-01

overall goal of hiring highly qualified firms on a fair basis. In conducting this research and writing its report of findings, I have benefited greatly... it . Introduction................... . . ... .. .. ..... Overview.................. . . ... .. .. ... Background........ ...... .. .. ...... Focus of...the focus of the study, its purpose and justification, its specific objective, and the scope of the study’s application. Background In recent years

Auditory Perception of Motor Vehicle Travel Paths

PubMed Central

Ashmead, Daniel H.; Grantham, D. Wesley; Maloff, Erin S.; Hornsby, Benjamin; Nakamura, Takabun; Davis, Timothy J.; Pampel, Faith; Rushing, Erin G.

2012-01-01

Objective These experiments address concerns that motor vehicles in electric engine mode are so quiet that they pose a risk to pedestrians, especially those with visual impairments. Background The “quiet car” issue has focused on hybrid and electric vehicles, although it also applies to internal combustion engine vehicles. Previous research has focused on detectability of vehicles, mostly in quiet settings. Instead, we focused on the functional ability to perceive vehicle motion paths. Method Participants judged whether simulated vehicles were traveling straight or turning, with emphasis on the impact of background traffic sound. Results In quiet, listeners made the straight-or-turn judgment soon enough in the vehicle’s path to be useful for deciding whether to start crossing the street. This judgment is based largely on sound level cues rather than the spatial direction of the vehicle. With even moderate background traffic sound, the ability to tell straight from turn paths is severely compromised. The signal-to-noise ratio needed for the straight-or-turn judgment is much higher than that needed to detect a vehicle. Conclusion Although a requirement for a minimum vehicle sound level might enhance detection of vehicles in quiet settings, it is unlikely that this requirement would contribute to pedestrian awareness of vehicle movements in typical traffic settings with many vehicles present. Application The findings are relevant to deliberations by government agencies and automobile manufacturers about standards for minimum automobile sounds and, more generally, for solutions to pedestrians’ needs for information about traffic, especially for pedestrians with sensory impairments. PMID:22768645

NASA/DoD Aerospace Knowledge Diffusion Research Project. Paper 31: The information-seeking behavior of engineers

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Bishop, Ann P.; Barclay, Rebecca O.; Kennedy, John M.

1993-01-01

Engineers are an extraordinarily diverse group of professionals, but an attribute common to all engineers is their use of information. Engineering can be conceptualized as an information processing system that must deal with work-related uncertainty through patterns of technical communications. Throughout the process, data, information, and tacit knowledge are being acquired, produced, transferred, and utilized. While acknowledging that other models exist, we have chosen to view the information-seeking behavior of engineers within a conceptual framework of the engineer as an information processor. This article uses the chosen framework to discuss information-seeking behavior of engineers, reviewing selected literature and empirical studies from library and information science, management, communications, and sociology. The article concludes by proposing a research agenda designed to extend our current, limited knowledge of the way engineers process information.

Information-Technology Based Physics Education

NASA Astrophysics Data System (ADS)

Kim, J. S.; Lee, K. H.

2001-04-01

Developing countries emphasize expansion of the educated population but demand for quality improvement follows later. Current science education reform is driven in part by post cold war restructuring of the global economy and associated focus on the education of a more scientifically literate society, due to the industrial change from labor-intensive to high-technology type, and the societal change inherent in the present information era. Industry needs employees of broad and flexible background with inter disciplinary training, engineers with better physics training, and well trained physicists. Education researches have proved that active-learning based methods are superior to the traditional methods and the information technology (IT) has lot to offer in this. Use of IT for improving physics education is briefly discussed with prospects for collaboration in the Asia-Pacific region via Asian Physics Education Network (ASPEN), UNESCO University Foundation Course in Physics (UUFCP), etc.

GSFC Information Systems Technology Developments Supporting the Vision for Space Exploration

NASA Technical Reports Server (NTRS)

Hughes, Peter; Dennehy, Cornelius; Mosier, Gary; Smith, Dan; Rykowski, Lisa

2004-01-01

The Vision for Space Exploration will guide NASA's future human and robotic space activities. The broad range of human and robotic missions now being planned will require the development of new system-level capabilities enabled by emerging new technologies. Goddard Space Flight Center is actively supporting the Vision for Space Exploration in a number of program management, engineering and technology areas. This paper provides a brief background on the Vision for Space Exploration and a general overview of potential key Goddard contributions. In particular, this paper focuses on describing relevant GSFC information systems capabilities in architecture development; interoperable command, control and communications; and other applied information systems technology/research activities that are applicable to support the Vision for Space Exploration goals. Current GSFC development efforts and task activities are presented together with future plans.

Solid waste information and tracking system client-server conversion project management plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

May, D.L.

1998-04-15

This Project Management Plan is the lead planning document governing the proposed conversion of the Solid Waste Information and Tracking System (SWITS) to a client-server architecture. This plan presents the content specified by American National Standards Institute (ANSI)/Institute of Electrical and Electronics Engineers (IEEE) standards for software development, with additional information categories deemed to be necessary to describe the conversion fully. This plan is a living document that will be reviewed on a periodic basis and revised when necessary to reflect changes in baseline design concepts and schedules. This PMP describes the background, planning and management of the SWITS conversion.more » It does not constitute a statement of product requirements. Requirements and specification documentation needed for the SWITS conversion will be released as supporting documents.« less

United Stirling's Solar Engine Development: the Background for the Vanguard Engine

NASA Technical Reports Server (NTRS)

Holgersson, S.

1984-01-01

The development and testing resulting in the Vanguard engine and some of the characteristics of the Stirling engine based power conversion unit are described. The major part of the solar engine development is concentrated to the three different areas, the receiver, the lubrication system and the control system. Five engines are on test within the solar project. The function of the components are validated in actual solar tests.

The Landscape of Prek-12 Engineering Online Resources for Teachers: Global Trends

ERIC Educational Resources Information Center

Bagiati, Aikaterini; Yoon, So Yoon; Evangelou, Demetra; Magana, Alejandra; Kaloustian, Garene; Zhu, Jiabin

2015-01-01

Background: The newly formed discipline of engineering education is addressing the need to (a) enhance STEM education for precollege students and (b) identify optimum ways to introduce engineering content starting, perhaps, from the early ages. Introducing engineering at the Prekindergarten through 12th grade (PreK-12) education level requires…

Meteorology Meets Engineering: An Interdisciplinary STEM Module for Middle and Early Secondary School Students

ERIC Educational Resources Information Center

Barrett, Bradford S.; Moran, Angela L.; Woods, John E.

2014-01-01

Background: Given the continued need to educate the public on both the meteorological and engineering hazards posed by the severe winds of a tornado, an interdisciplinary science, technology, engineering, and mathematics (STEM) module designed by the faculty from the Oceanography and Mechanical Engineering Departments at the United States Naval…

International program for Earth observations

NASA Technical Reports Server (NTRS)

1990-01-01

During the 1990 summer session of the International Space University, graduate students of many different countries and with various academic backgrounds carried out a design project that focused on how to meet the most pressing environmental information requirements of the 1990's. The International Program for Earth Observations (IPEO) is the result of the students labor. The IPEO report examines the legal and institutional, scientific, engineering and systems, financial and economic, and market development approaches needed to improve international earth observations and information systems to deal with environmental issues of global importance. The IPEO scenario is based on the production of a group of lightweight satellites to be used in global remote sensing programs. The design and function of the satellite is described in detail.

An architecture for diversity-aware search for medical web content.

PubMed

Denecke, K

2012-01-01

The Web provides a huge source of information, also on medical and health-related issues. In particular the content of medical social media data can be diverse due to the background of an author, the source or the topic. Diversity in this context means that a document covers different aspects of a topic or a topic is described in different ways. In this paper, we introduce an approach that allows to consider the diverse aspects of a search query when providing retrieval results to a user. We introduce a system architecture for a diversity-aware search engine that allows retrieving medical information from the web. The diversity of retrieval results is assessed by calculating diversity measures that rely upon semantic information derived from a mapping to concepts of a medical terminology. Considering these measures, the result set is diversified by ranking more diverse texts higher. The methods and system architecture are implemented in a retrieval engine for medical web content. The diversity measures reflect the diversity of aspects considered in a text and its type of information content. They are used for result presentation, filtering and ranking. In a user evaluation we assess the user satisfaction with an ordering of retrieval results that considers the diversity measures. It is shown through the evaluation that diversity-aware retrieval considering diversity measures in ranking could increase the user satisfaction with retrieval results.

Think Engineer, Think Male?

ERIC Educational Resources Information Center

Male, Sally A.; Bush, Mark B.; Murray, Kevin

2009-01-01

Engineering education needs to develop the competencies required for engineering work, and attract and retain students from diverse backgrounds. This study investigated the possibility that the perceived importance of competencies is subconsciously influenced by gendered assumptions, and as a consequence, this lowers the status given to…

Detectability prediction for a thermoacoustic sensor in the breazeale nuclear reactor pool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, James; Hrisko, Joshua; Garrett, Steven

2016-03-01

Laboratory experiments have suggested that thermoacoustic engines can be in- corporated within nuclear fuel rods. Such engines would radiate sounds that could be used to measure and acoustically-telemeter information about the op- eration of the nuclear reactor (e.g., coolant temperature or uxes of neutrons or other energetic particles) or the physical condition of the nuclear fuel itself (e.g., changes in temperature, evolved gases) that are encoded as the frequency and/or amplitude of the radiated sound [IEEE Measurement and Instrumen- tation 16(3), 18-25 (2013)]. For such acoustic information to be detectable, it is important to characterize the vibroacoustical environments within reactors.more » Measurements will be presented of the background noise spectra (with and with- out coolant pumps) and reverberation times within the 70,000 gallon pool that cools and shields the fuel in the 1 MW research reactor on Penn State's campus using two hydrophones, a piezoelectric projector, and an accelerometer. Sev- eral signal-processing techniques will be demonstrated to enhance the measured results. Background vibrational measurement were also taken at the 250 MW Advanced Test Reactor, located at the Idaho National Laboratory, using ac- celerometers mounted outside the reactor's pressure vessel and on plumbing will also be presented. The detectability predictions made in the thesis were validated in September 2015 using a nuclear ssion-heated thermoacoustic sensor that was placed in the core of the Breazeale Nuclear Reactor on Penn State's campus. Some features of the thermoacoustic device used in that experiment will also be revealed. [Work supported by the U.S. Department of Energy.]« less

Space Station engineering and technology development

NASA Technical Reports Server (NTRS)

1985-01-01

Historical background, costs, organizational assignments, technology development, user requirements, mission evolution, systems analyses and design, systems engineering and integration, contracting, and policies of the space station are discussed.

Interview with Dr. Charles Nolan: Dean of Admissions, Franklin W. Olin College of Engineering

ERIC Educational Resources Information Center

Helms, Robin Matross

2003-01-01

This article presents an interview with Dr. Charles Nolan, the former Dean of Admission at the Franklin W. Olin College of Engineering, in Needham, Massachusetts. Chartered in 1997, Olin College has taken a new approach to undergraduate engineering education by providing its students with both a solid engineering background and knowledge in the…

Impacts of Innovativeness and Attitude on Entrepreneurial Intention: Among Engineering and Non-Engineering Students

ERIC Educational Resources Information Center

Law, Kris M. Y.; Breznik, Kristijan

2017-01-01

This study attempted to explore the impacts of attitudinal antecedents on students' entrepreneurial intention. Comparisons between students of engineering and non-engineering backgrounds and gender groups were made. Total of 998 students from universities in Hong Kong were surveyed, leading to a number of highlights in the study. First, it is…

Interests and attitudes of engineering students

NASA Astrophysics Data System (ADS)

Rutherford, Brian

2007-12-01

Engineering programs have been less successful than other professions in achieving gender equity. Analyses of gender differences in the attitudes and interests of engineering students may help illuminate ways to combat the underrepresentation of women in engineering. This study examined data collected from 863 engineering students who attended 15 American universities from fall 2005 through spring 2006 using an online survey. The survey was designed to understand the backgrounds, academic preparation, motivation, interests, and attitudes of engineering students. To determine whether males and females received different academic preparation prior to entering engineering, the survey examined participants' mathematics, science, and technical coursework taken in high school. The questions probed students' comfort and interest level in mathematics, science, and technology/engineering and investigated student interest in the three fundamental engineering activities by asking 49 design, build, and analyze questions on topics covering a variety of engineering disciplines. A combination of question formats was used including pre-categorized demographic information, 5-point Likert scales, and open-ended responses. Gender similarities and differences were identified and their implications were considered for the recruitment and retention of engineers. Female engineering students in this study were equally or better prepared than males to major in engineering based on the number and types of science and mathematics classes taken in high school. However, statistically significant gender differences were found in the attitudes and interests of engineering students. The difference in the comfort level, interest in learning, being able to demonstrate, or in performing stem skills depended on the question topic rather than gender. The areas with the highest comfort and interest level were often different for females and males. Several topics and curriculum areas of high interest to both genders related to engineering education in several engineering disciplines were identified. It appears that females and males were motivated to choose engineering as a career for different reasons. Analysis revealed that female engineering students are generally more altruistic and less interested in "things" than male engineering students. This study also found that females were comfortable in mathematics or science, but were less comfortable using computers, tools, and machines---all essential engineering skills.

A Taxonomic Search Engine: Federating taxonomic databases using web services

PubMed Central

Page, Roderic DM

2005-01-01

Background The taxonomic name of an organism is a key link between different databases that store information on that organism. However, in the absence of a single, comprehensive database of organism names, individual databases lack an easy means of checking the correctness of a name. Furthermore, the same organism may have more than one name, and the same name may apply to more than one organism. Results The Taxonomic Search Engine (TSE) is a web application written in PHP that queries multiple taxonomic databases (ITIS, Index Fungorum, IPNI, NCBI, and uBIO) and summarises the results in a consistent format. It supports "drill-down" queries to retrieve a specific record. The TSE can optionally suggest alternative spellings the user can try. It also acts as a Life Science Identifier (LSID) authority for the source taxonomic databases, providing globally unique identifiers (and associated metadata) for each name. Conclusion The Taxonomic Search Engine is available at and provides a simple demonstration of the potential of the federated approach to providing access to taxonomic names. PMID:15757517

Noise abatement and traffic safety: The trade-off of quieter engines and pavements on vehicle detection.

PubMed

Mendonça, C; Freitas, E; Ferreira, J P; Raimundo, I D; Santos, J A

2013-03-01

Road traffic sounds are a major source of noise pollution in urban areas. But recent developments such as low noise pavements and hybrid/electric engine vehicles cast an optimistic outlook over such an environmental problem. However, it can be argued that engine, tire, and road noise could be relevant sources of information to avoid road traffic conflicts and accidents. In this paper, we analyze the potential trade-offs of traffic-noise abatement approaches in an experimental study, focusing for the first time on the impact and interaction of relevant factors such as pavement type, vehicle type, listener's age, and background noise, on vehicle detection levels. Results reveal that vehicle and pavement type significantly affect vehicle detection. Age is a significant factor, as both younger and older people exhibit lower detection levels of incoming vehicles. Low noise pavements combined with all-electric and hybrid vehicles might pose a severe threat to the safety of vulnerable road users. All factors interact simultaneously, and vehicle detection is best predicted by the loudness signal-to-noise ratio. Copyright © 2012 Elsevier Ltd. All rights reserved.

Trends in aeropropulsion research and their impact on engineering education

NASA Technical Reports Server (NTRS)

Povinelli, Louis A.; Reichert, Bruce A.; Glassman, Arthur J.

1992-01-01

This presentation is concerned with the trends in aeropropulsion both in the U.S. and abroad and the impact of these trends on the educational process in our universities. In this paper, we shall outline the new directions for research which may be of interest to educators in the aeropropulsion field. Awareness of new emphases, such as emission reductions, noise control, maneuverability, speed, etc., will have a great impact on engineering educators responsible for restructuring courses in propulsion. The information presented herein will also provide some background material for possible consideration in the future development of propulsion courses. In describing aeropropulsion, we are concerned primarily with air-breathing propulsion; however many observations apply equally as well to rocket engine systems. Aeropropulsion research needs are primarily motivated by technologies required for advanced vehicle systems and frequently driven by external requirements such as economic competitiveness, environmental concern and national security. In this presentation, vehicle based research is first described, followed by a discussion of discipline and multidiscipline research necessary to implement the vehicle-focused programs. The importance of collaboration in research and the training of future researchers concludes this presentation.

Rocket-Based Combined-Cycle (RBCC) Propulsion Technology Workshop. Tutorial session

NASA Technical Reports Server (NTRS)

1992-01-01

The goal of this workshop was to illuminate the nation's space transportation and propulsion engineering community on the potential of hypersonic combined cycle (airbreathing/rocket) propulsion systems for future space transportation applications. Four general topics were examined: (1) selections from the expansive advanced propulsion archival resource; (2) related propulsion systems technical backgrounds; (3) RBCC engine multimode operations related subsystem background; and (4) focused review of propulsion aspects of current related programs.

An Assessment of Different Educational Background of Students Performance in Engineering Mathematics and on the Class of Award Obtained at the Higher National Diploma (HND) Level at Cape Coast Polytechnic, Ghana

ERIC Educational Resources Information Center

Asirifi, Michael Kwabena; Mensah, Kweku Abeeku; Amoako, Joseph

2015-01-01

The purpose of this research article is to find out an assessment of different educational background of students performance in engineering mathematics and on the class of award obtained at the Higher National Diploma (HND) level at Cape Coast Polytechnic. A descriptive survey was conducted on students of the Electricals/Electronics Department…

Engineering brain-computer interfaces: past, present and future.

PubMed

Hughes, M A

2014-06-01

Electricity governs the function of both nervous systems and computers. Whilst ions move in polar fluids to depolarize neuronal membranes, electrons move in the solid-state lattices of microelectronic semiconductors. Joining these two systems together, to create an iono-electric brain-computer interface, is an immense challenge. However, such interfaces offer (and in select clinical contexts have already delivered) a method of overcoming disability caused by neurological or musculoskeletal pathology. To fulfill their theoretical promise, several specific challenges demand consideration. Rate-limiting steps cover a diverse range of disciplines including microelectronics, neuro-informatics, engineering, and materials science. As those who work at the tangible interface between brain and outside world, neurosurgeons are well placed to contribute to, and inform, this cutting edge area of translational research. This article explores the historical background, status quo, and future of brain-computer interfaces; and outlines the challenges to progress and opportunities available to the clinical neurosciences community.

3D printing from diagnostic images: a radiologist's primer with an emphasis on musculoskeletal imaging-putting the 3D printing of pathology into the hands of every physician.

PubMed

Friedman, Tamir; Michalski, Mark; Goodman, T Rob; Brown, J Elliott

2016-03-01

Three-dimensional (3D) printing has recently erupted into the medical arena due to decreased costs and increased availability of printers and software tools. Due to lack of detailed information in the medical literature on the methods for 3D printing, we have reviewed the medical and engineering literature on the various methods for 3D printing and compiled them into a practical "how to" format, thereby enabling the novice to start 3D printing with very limited funds. We describe (1) background knowledge, (2) imaging parameters, (3) software, (4) hardware, (5) post-processing, and (6) financial aspects required to cost-effectively reproduce a patient's disease ex vivo so that the patient, engineer and surgeon may hold the anatomy and associated pathology in their hands.

Common Criteria Related Security Design Patterns for Intelligent Sensors—Knowledge Engineering-Based Implementation

PubMed Central

Bialas, Andrzej

2011-01-01

Intelligent sensors experience security problems very similar to those inherent to other kinds of IT products or systems. The assurance for these products or systems creation methodologies, like Common Criteria (ISO/IEC 15408) can be used to improve the robustness of the sensor systems in high risk environments. The paper presents the background and results of the previous research on patterns-based security specifications and introduces a new ontological approach. The elaborated ontology and knowledge base were validated on the IT security development process dealing with the sensor example. The contribution of the paper concerns the application of the knowledge engineering methodology to the previously developed Common Criteria compliant and pattern-based method for intelligent sensor security development. The issue presented in the paper has a broader significance in terms that it can solve information security problems in many application domains. PMID:22164064

Common criteria related security design patterns for intelligent sensors--knowledge engineering-based implementation.

PubMed

Bialas, Andrzej

2011-01-01

Intelligent sensors experience security problems very similar to those inherent to other kinds of IT products or systems. The assurance for these products or systems creation methodologies, like Common Criteria (ISO/IEC 15408) can be used to improve the robustness of the sensor systems in high risk environments. The paper presents the background and results of the previous research on patterns-based security specifications and introduces a new ontological approach. The elaborated ontology and knowledge base were validated on the IT security development process dealing with the sensor example. The contribution of the paper concerns the application of the knowledge engineering methodology to the previously developed Common Criteria compliant and pattern-based method for intelligent sensor security development. The issue presented in the paper has a broader significance in terms that it can solve information security problems in many application domains.

Algebra for Enterprise Ontology: towards analysis and synthesis of enterprise models

NASA Astrophysics Data System (ADS)

Suga, Tetsuya; Iijima, Junichi

2018-03-01

Enterprise modeling methodologies have made enterprises more likely to be the object of systems engineering rather than craftsmanship. However, the current state of research in enterprise modeling methodologies lacks investigations of the mathematical background embedded in these methodologies. Abstract algebra, a broad subfield of mathematics, and the study of algebraic structures may provide interesting implications in both theory and practice. Therefore, this research gives an empirical challenge to establish an algebraic structure for one aspect model proposed in Design & Engineering Methodology for Organizations (DEMO), which is a major enterprise modeling methodology in the spotlight as a modeling principle to capture the skeleton of enterprises for developing enterprise information systems. The results show that the aspect model behaves well in the sense of algebraic operations and indeed constructs a Boolean algebra. This article also discusses comparisons with other modeling languages and suggests future work.

Andy Hardin with 3-D printed engine part

NASA Image and Video Library

2015-06-22

ANDY HARDIN, A PROPULSION ENGINEER AT NASA'S MARSHALL SPACE FLIGHT CENTER IN HUNTSVILLE, ALABAMA, SHOWS A 3-D PRINTED ROCKET PART MADE WITH A SELECTIVE LASER MELTING MACHINE. PARTS FOR THE SPACE LAUNCH SYSTEM'S RS-25 ROCKET ENGINE ARE BEING MADE WITH THE MACHINE IN THE BACKGROUND

Knowledge Engineering (Or, Catching Black Cats in Dark Rooms).

ERIC Educational Resources Information Center

Ruyle, Kim E.

1993-01-01

Discusses knowledge engineering, its relationship to artificial intelligence, and possible applications to developing expert systems, job aids, and technical training. The educational background of knowledge engineers is considered; the role of subject matter experts is described; and examples of flow charts, lists, and pictorial representations…

Initially Researches for the Development of SSME under the Background of IOT

NASA Astrophysics Data System (ADS)

Han, Kun; Liu, Shurong; Zhang, Dacheng; Han, Ying

The Internet Of Things (IOT) is proposed in the 1990s. The original intention has been put forward is people to things and things to things can deliver information like person as. IOT broke the human traditional thinking. This paper researches the practical function of IOT to expand the theory of Services Sciences, Management and Engineering (SSME). On the analysis of the key technology and model of IOT, the events-driven SSME model based on IOT, and the IOT framework based on SSME, it further studies the importance of IOT in the field of SSME.

NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box

NASA Technical Reports Server (NTRS)

ONeil, D. A.; Craig, D. A.; Christensen, C. B.; Gresham, E. C.

2005-01-01

The objective of this Technical Interchange Meeting was to increase the quantity and quality of technical, cost, and programmatic data used to model the impact of investing in different technologies. The focus of this meeting was the Technology Tool Box (TTB), a database of performance, operations, and programmatic parameters provided by technologists and used by systems engineers. The TTB is the data repository used by a system of models known as the Advanced Technology Lifecycle Analysis System (ATLAS). This report describes the result of the November meeting, and also provides background information on ATLAS and the TTB.

Advanced educational program in optoelectronics for undergraduates and graduates in electronics

NASA Astrophysics Data System (ADS)

Vladescu, Marian; Schiopu, Paul

2015-02-01

The optoelectronics education included in electronics curricula at Faculty of Electronics, Telecommunications and Information Technology of "Politehnica" University of Bucharest started in early '90s, and evolved constantly since then, trying to address the growing demand of engineers with a complex optoelectronics profile and to meet the increased requirements of microelectronics, optoelectronics, and lately nanotechnologies. Our goal is to provide a high level of theoretical background combined with advanced experimental tools in laboratories, and also with simulation platforms. That's why we propose an advanced educational program in optoelectronics for both grades of our study program, bachelor and master.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 51: Workplace communications skills and the value of communications and information-use skills instruction: Engineering students' perspectives

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1995-01-01

Studies indicate that communications and information-related activities take up a substantial portion of an engineer's work week; therefore, effective communications and information use skills are one of the key engineering competencies that recent graduates of engineering programs are expected to possess. Feedback from industry rates communications and information use skills of entry-level engineers low. Missing from current discussions of communications and information use skills and competencies for engineering students is a clear explanation from the professional engineering community about what constitutes 'acceptable and desirable communications and information norms' within that community. To gather adequate and generalizable data about communications and information skills instruction and to provide a student perspective on the communications skills of engineers, we undertook a national study of aerospace engineering students in March 1993. The study included questions about the importance of certain communications and information skills to professional success, the instruction students had received in these skills, and perceived helpfulness of the instruction. Selected results from the study study are reported in this paper.

Ignition study of a petrol/CNG single cylinder engine

NASA Astrophysics Data System (ADS)

Khan, N.; Saleem, Z.; Mirza, A. A.

2005-11-01

Benefits of laser ignition over the electrical ignition system for Compressed Natural Gas (CNG) engines have fuelled automobile industry and led to an extensive research on basic characteristics to switch over to the emerging technologies. This study was undertaken to determine the electrical and physical characteristics of the electric spark ignition of single cylinder petrol/CNG engine to determine minimum ignition requirements and timeline of ignition events to use in subsequent laser ignition study. This communication briefly reviews the ongoing research activities and reports the results of this experimental study. The premixed petrol and CNG mixtures were tested for variation of current and voltage characteristics of the spark with speed of engine. The current magnitude of discharge circuit was found to vary linearly over a wide range of speed but the stroke to stroke fire time was found to vary nonlinearly. The DC voltage profiles were observed to fluctuate randomly during ignition process and staying constant in rest of the combustion cycle. Fire to fire peaks of current amplitudes fluctuated up to 10% of the peak values at constant speed but increased almost linearly with increase in speed. Technical barriers of laser ignition related to threshold minimum ignition energy, inter-pulse durations and firing sequence are discussed. Present findings provide a basic initiative and background information for designing suitable timeline algorithms for laser ignited leaner direct injected CNG engines.

Leveraging Health Information Exchange to Improve Population Health Reporting Processes: Lessons in Using a Collaborative-Participatory Design Process

PubMed Central

Revere, Debra; Dixon, Brian E.; Hills, Rebecca; Williams, Jennifer L.; Grannis, Shaun J.

2014-01-01

Introduction: Surveillance, or the systematic monitoring of disease within a population, is a cornerstone function of public health. Despite significant investment in information technologies (IT) to improve the public’s health, health care providers continue to rely on manual, spontaneous reporting processes that can result in incomplete and delayed surveillance activities. Background: Participatory design principles advocate including real users and stakeholders when designing an information system to ensure high ecological validity of the product, incorporate relevance and context into the design, reduce misconceptions designers can make due to insufficient domain expertise, and ultimately reduce barriers to adoption of the system. This paper focuses on the collaborative and informal participatory design process used to develop enhanced, IT-enabled reporting processes that leverage available electronic health records in a health information exchange to prepopulate notifiable-conditions report forms used by public health authorities. Methods: Over nine months, public health stakeholders, technical staff, and informatics researchers were engaged in a multiphase participatory design process that included public health stakeholder focus groups, investigator-engineering team meetings, public health survey and census regarding high-priority data elements, and codesign of exploratory prototypes and final form mock-ups. Findings: A number of state-mandated report fields that are not highly used or desirable for disease investigation were eliminated, which allowed engineers to repurpose form space for desired and high-priority data elements and improve the usability of the forms. Our participatory design process ensured that IT development was driven by end user expertise and needs, resulting in significant improvements to the layout and functionality of the reporting forms. Discussion: In addition to informing report form development, engaging with public health end users and stakeholders through the participatory design process provided new insights into public health workflow and allowed the team to quickly triage user requests while managing user expectations within the realm of engineering possibilities. Conclusion: Engaging public health, engineering staff, and investigators in a shared codesigning process ensured that the new forms will not only meet real-life needs but will also support development of a product that will be adopted and, ultimately, improve communicable and infectious disease reporting by clinicians to public health. PMID:25848615

The Information-Seeking Habits of Engineering Faculty

ERIC Educational Resources Information Center

Engel, Debra; Robbins, Sarah; Kulp, Christina

2011-01-01

Many studies of information-seeking habits of engineers focus on understanding the similarities and differences between scientists and engineers. This study explores the information-seeking behavior of academic engineering faculty from twenty public research universities. This investigation includes an examination of how frequently engineer- ing…

Automated Knowledge Generation with Persistent Surveillance Video

DTIC Science & Technology

2008-03-26

5 2.1 Artificial Intelligence . . . . . . . . . . . . . . . . . . . . 5 2.1.1 Formal Logic . . . . . . . . . . . . . . . . . . . 6 2.1.2...background of Artificial Intelligence and the reasoning engines that will be applied to generate knowledge from data. Section 2.2 discusses background on...generation from persistent video. 4 II. Background In this chapter, we will discuss the background of Artificial Intelligence, Semantic Web, image

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 13: The information-seeking habits and practices of engineers

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.

1991-01-01

It is argued that only by maximizing the research and development process can the United States maintain and possibly capture its international competitive edge. Key to this goal is the provision of information services and products which meet the information needs of engineers. Evidence exists which indicates that traditional information services and products may, in fact, not be meeting the information needs of engineers. The primary reason for this deficiency is three fold. First, the specific information needs of engineers are neither well known nor well understood. Second, what is known about the information seeking habits and practices of engineers has not been applied to existing engineering information services. Third, the information professionals continue to over-emphasize technology instead of concentrating on the quality of the information itself and the ability of the information to meet the needs of the user.

MX Resident Engineer Networking Guide.

DTIC Science & Technology

1982-04-01

FIGURES 6 INTRODUCTION ............................................................ 11 Background Approach Purpose Scope 2 SYSTEM OVERVIEW...RESIDENT ENGINEER NETWORKING GUIDE 1 INTRODUCTION Background The Network Analysis System (NAS) is not a new planning method. It has been used for more than...DEVELOPMENT RUN DATE 19MAY7’ 2359MRS S U M M A R I P A Y N L N T S S T A I I M E N I PROJECT START jAUG ?? PROJECT EXR 4 L1 SAMPLE PNOPLEM *ACTIVITT-YN

Building Information Modelling for Cultural Heritage: A review

NASA Astrophysics Data System (ADS)

Logothetis, S.; Delinasiou, A.; Stylianidis, E.

2015-08-01

We discuss the evolution and state-of-the-art of the use of Building Information Modelling (BIM) in the field of culture heritage documentation. BIM is a hot theme involving different characteristics including principles, technology, even privacy rights for the cultural heritage objects. Modern documentation needs identified the potential of BIM in the recent years. Many architects, archaeologists, conservationists, engineers regard BIM as a disruptive force, changing the way professionals can document and manage a cultural heritage structure. The latest years, there are many developments in the BIM field while the developed technology and methods challenged the cultural heritage community in the documentation framework. In this review article, following a brief historic background for the BIM, we review the recent developments focusing in the cultural heritage documentation perspective.

US EPA's Ecological Risk Assessment Support Center ...

EPA Pesticide Factsheets

BackgroundThe ERASC provides technical information and addresses scientific questions of concern or interest on topics relevant to ecological risk assessment at hazardous waste sites for EPA's Office of Solid Waste and Emergency Response (OSWER) personnel and the Office of Resource Conservation and Recovery (ORCR) staff. Requests are channeled to ERASC through the Ecological Risk Assessment Forum (ERAF). To assess emerging and complex scientific issues that require expert judgment, the ERASC relies on the expertise of scientists and engineers located throughout EPA's Office of Research and Development (ORD) labs and centers.ResponseERASC develops responses that reflect the state of the science for ecological risk assessment and also provides a communication point for the distribution of the responses to other interested parties. For further information, contact Ecology_ERASC@epa.gov or call 513-569-7940.

iSMART: Ontology-based Semantic Query of CDA Documents

PubMed Central

Liu, Shengping; Ni, Yuan; Mei, Jing; Li, Hanyu; Xie, Guotong; Hu, Gang; Liu, Haifeng; Hou, Xueqiao; Pan, Yue

2009-01-01

The Health Level 7 Clinical Document Architecture (CDA) is widely accepted as the format for electronic clinical document. With the rich ontological references in CDA documents, the ontology-based semantic query could be performed to retrieve CDA documents. In this paper, we present iSMART (interactive Semantic MedicAl Record reTrieval), a prototype system designed for ontology-based semantic query of CDA documents. The clinical information in CDA documents will be extracted into RDF triples by a declarative XML to RDF transformer. An ontology reasoner is developed to infer additional information by combining the background knowledge from SNOMED CT ontology. Then an RDF query engine is leveraged to enable the semantic queries. This system has been evaluated using the real clinical documents collected from a large hospital in southern China. PMID:20351883

Preparing the NDE engineers of the future: Education, training, and diversity

NASA Astrophysics Data System (ADS)

Holland, Stephen D.

2017-02-01

As quantitative NDE has matured and entered the mainstream, it has created an industry need for engineers who can select, evaluate, and qualify NDE techniques to satisfy quantitative engineering requirements. NDE as a field is cross-disciplinary with major NDE techniques relying on a broad spectrum of physics disciplines including fluid mechanics, electromagnetics, mechanical waves, and high energy physics. An NDE engineer needs broad and deep understanding of the measurement physics across modalities, a general engineering background, and familiarity with shop-floor practices and tools. While there are a wide range of certification and training programs worldwide for NDE technicians, there are few programs aimed at engineers. At the same time, substantial demographic shifts are underway with many experienced NDE engineers and technicians nearing retirement, and with new generations coming from much more diverse backgrounds. There is a need for more and better education opportunities for NDE engineers. Both teaching and learning NDE engineering are inherently challenging because of the breadth and depth of knowledge required. At the same time, sustaining the field in a more diverse era will require broadening participation of previously underrepresented groups. The QNDE 2016 conference in Atlanta, GA included a session on NDE education, training, and diversity. This paper summarizes the outcomes and discussion from this session.

76 FR 20351 - Federal Acquisition Regulation; Information Collection; Architect-Engineer Qualifications (SF 330)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-12

...; Information Collection; Architect-Engineer Qualifications (SF 330) AGENCIES: Department of Defense (DOD... approve an extension of a currently approved information collection requirement for the Architect-Engineer... Standard Form 330, Part I is used by all Executive agencies to obtain information from architect-engineer...

A Web Search on Environmental Topics: What Is the Role of Ranking?

PubMed Central

Filisetti, Barbara; Mascaretti, Silvia; Limina, Rosa Maria; Gelatti, Umberto

2013-01-01

Abstract Background: Although the Internet is easy to use, the mechanisms and logic behind a Web search are often unknown. Reliable information can be obtained, but it may not be visible as the Web site is not located in the first positions of search results. The possible risks of adverse health effects arising from environmental hazards are issues of increasing public interest, and therefore the information about these risks, particularly on topics for which there is no scientific evidence, is very crucial. The aim of this study was to investigate whether the presentation of information on some environmental health topics differed among various search engines, assuming that the most reliable information should come from institutional Web sites. Materials and Methods: Five search engines were used: Google, Yahoo!, Bing, Ask, and AOL. The following topics were searched in combination with the word “health”: “nuclear energy,” “electromagnetic waves,” “air pollution,” “waste,” and “radon.” For each topic three key words were used. The first 30 search results for each query were considered. The ranking variability among the search engines and the type of search results were analyzed for each topic and for each key word. The ranking of institutional Web sites was given particular consideration. Results: Variable results were obtained when surfing the Internet on different environmental health topics. Multivariate logistic regression analysis showed that, when searching for radon and air pollution topics, it is more likely to find institutional Web sites in the first 10 positions compared with nuclear power (odds ratio=3.4, 95% confidence interval 2.1–5.4 and odds ratio=2.9, 95% confidence interval 1.8–4.7, respectively) and also when using Google compared with Bing (odds ratio=3.1, 95% confidence interval 1.9–5.1). Conclusions: The increasing use of online information could play an important role in forming opinions. Web users should become more aware of the importance of finding reliable information, and health institutions should be able to make that information more visible. PMID:24083368

Practical and Efficient Searching in Proteomics: A Cross Engine Comparison

PubMed Central

Paulo, Joao A.

2014-01-01

Background Analysis of large datasets produced by mass spectrometry-based proteomics relies on database search algorithms to sequence peptides and identify proteins. Several such scoring methods are available, each based on different statistical foundations and thereby not producing identical results. Here, the aim is to compare peptide and protein identifications using multiple search engines and examine the additional proteins gained by increasing the number of technical replicate analyses. Methods A HeLa whole cell lysate was analyzed on an Orbitrap mass spectrometer for 10 technical replicates. The data were combined and searched using Mascot, SEQUEST, and Andromeda. Comparisons were made of peptide and protein identifications among the search engines. In addition, searches using each engine were performed with incrementing number of technical replicates. Results The number and identity of peptides and proteins differed across search engines. For all three search engines, the differences in proteins identifications were greater than the differences in peptide identifications indicating that the major source of the disparity may be at the protein inference grouping level. The data also revealed that analysis of 2 technical replicates can increase protein identifications by up to 10-15%, while a third replicate results in an additional 4-5%. Conclusions The data emphasize two practical methods of increasing the robustness of mass spectrometry data analysis. The data show that 1) using multiple search engines can expand the number of identified proteins (union) and validate protein identifications (intersection), and 2) analysis of 2 or 3 technical replicates can substantially expand protein identifications. Moreover, information can be extracted from a dataset by performing database searching with different engines and performing technical repeats, which requires no additional sample preparation and effectively utilizes research time and effort. PMID:25346847

Rational selection and engineering of exogenous principal sigma factor (σHrdB) to increase teicoplanin production in an industrial strain of Actinoplanes teichomyceticus

PubMed Central

2014-01-01

Background Transcriptional engineering has presented a strong ability of phenotypic improvement in microorganisms. However, it could not be directly applied to Actinoplanes teichomyceticus L-27 because of the paucity of endogenous transcription factors in the strain. In this study, exogenous transcription factors were rationally selected and transcriptional engineering was carried out to increase the productivity of teicoplanin in L-27. Results It was illuminated that the σHrdB molecules shared strong similarity of amino acid sequences among some genera of actinomycetes. Combining this advantage with the ability of transcriptional engineering, exogenous sigma factor σHrdB molecules were rationally selected and engineered to improve L-27. hrdB genes from Actinoplanes missouriensis 431, Micromonospora aurantiaca ATCC 27029 and Salinispora arenicola CNS-205 were selected based on molecular evolutionary analysis. Random mutagenesis, DNA shuffling and point mutation were subsequently performed to generate diversified mutants. A recombinant was identified through screening program, yielding 5.3 mg/ml of teicoplanin, over 2-fold compared to that of L-27. More significantly, the engineered strain presented a good performance in 500-l pilot scale fermentation, which meant its valuable potential application in industry. Conclusions Through rational selection and engineering of exogenous transcriptional factor, we have extended the application of transcriptional engineering. To our knowledge, it is the first time to focus on the related issue. In addition, possessing the advantage of efficient metabolic perturbation in transcription level, this strategy could be useful in analyzing metabolic and physiological mechanisms of strains, especially those with the only information on taxonomy. PMID:24428890

(NESC) NASA Engineering and Safety Center Orion Heat Shield Carr

NASA Image and Video Library

2014-04-29

(NESC) NASA Engineering and Safety Center Orion Heat Shield Carrier Structure: Titanium Orthogrid heat shield sub-component dynamic test article : person in the photo Jim Jeans (Background: Mike Kirsch, James Ainsworth)

Development and tuning of an original search engine for patent libraries in medicinal chemistry

PubMed Central

2014-01-01

Background The large increase in the size of patent collections has led to the need of efficient search strategies. But the development of advanced text-mining applications dedicated to patents of the biomedical field remains rare, in particular to address the needs of the pharmaceutical & biotech industry, which intensively uses patent libraries for competitive intelligence and drug development. Methods We describe here the development of an advanced retrieval engine to search information in patent collections in the field of medicinal chemistry. We investigate and combine different strategies and evaluate their respective impact on the performance of the search engine applied to various search tasks, which covers the putatively most frequent search behaviours of intellectual property officers in medical chemistry: 1) a prior art search task; 2) a technical survey task; and 3) a variant of the technical survey task, sometimes called known-item search task, where a single patent is targeted. Results The optimal tuning of our engine resulted in a top-precision of 6.76% for the prior art search task, 23.28% for the technical survey task and 46.02% for the variant of the technical survey task. We observed that co-citation boosting was an appropriate strategy to improve prior art search tasks, while IPC classification of queries was improving retrieval effectiveness for technical survey tasks. Surprisingly, the use of the full body of the patent was always detrimental for search effectiveness. It was also observed that normalizing biomedical entities using curated dictionaries had simply no impact on the search tasks we evaluate. The search engine was finally implemented as a web-application within Novartis Pharma. The application is briefly described in the report. Conclusions We have presented the development of a search engine dedicated to patent search, based on state of the art methods applied to patent corpora. We have shown that a proper tuning of the system to adapt to the various search tasks clearly increases the effectiveness of the system. We conclude that different search tasks demand different information retrieval engines' settings in order to yield optimal end-user retrieval. PMID:24564220

Developing the Next Generation of Science Data System Engineers

NASA Technical Reports Server (NTRS)

Moses, John F.; Behnke, Jeanne; Durachka, Christopher D.

2016-01-01

At Goddard, engineers and scientists with a range of experience in science data systems are needed to employ new technologies and develop advances in capabilities for supporting new Earth and Space science research. Engineers with extensive experience in science data, software engineering and computer-information architectures are needed to lead and perform these activities. The increasing types and complexity of instrument data and emerging computer technologies coupled with the current shortage of computer engineers with backgrounds in science has led the need to develop a career path for science data systems engineers and architects.The current career path, in which undergraduate students studying various disciplines such as Computer Engineering or Physical Scientist, generally begins with serving on a development team in any of the disciplines where they can work in depth on existing Goddard data systems or serve with a specific NASA science team. There they begin to understand the data, infuse technologies, and begin to know the architectures of science data systems. From here the typical career involves peermentoring, on-the-job training or graduate level studies in analytics, computational science and applied science and mathematics. At the most senior level, engineers become subject matter experts and system architect experts, leading discipline-specific data centers and large software development projects. They are recognized as a subject matter expert in a science domain, they have project management expertise, lead standards efforts and lead international projects. A long career development remains necessary not only because of the breadth of knowledge required across physical sciences and engineering disciplines, but also because of the diversity of instrument data being developed today both by NASA and international partner agencies and because multidiscipline science and practitioner communities expect to have access to all types of observational data.This paper describes an approach to defining career-path guidance for college-bound high school and undergraduate engineering students, junior and senior engineers from various disciplines.

Developing the Next Generation of Science Data System Engineers

NASA Astrophysics Data System (ADS)

Moses, J. F.; Durachka, C. D.; Behnke, J.

2015-12-01

At Goddard, engineers and scientists with a range of experience in science data systems are needed to employ new technologies and develop advances in capabilities for supporting new Earth and Space science research. Engineers with extensive experience in science data, software engineering and computer-information architectures are needed to lead and perform these activities. The increasing types and complexity of instrument data and emerging computer technologies coupled with the current shortage of computer engineers with backgrounds in science has led the need to develop a career path for science data systems engineers and architects. The current career path, in which undergraduate students studying various disciplines such as Computer Engineering or Physical Scientist, generally begins with serving on a development team in any of the disciplines where they can work in depth on existing Goddard data systems or serve with a specific NASA science team. There they begin to understand the data, infuse technologies, and begin to know the architectures of science data systems. From here the typical career involves peer mentoring, on-the-job training or graduate level studies in analytics, computational science and applied science and mathematics. At the most senior level, engineers become subject matter experts and system architect experts, leading discipline-specific data centers and large software development projects. They are recognized as a subject matter expert in a science domain, they have project management expertise, lead standards efforts and lead international projects. A long career development remains necessary not only because of the breath of knowledge required across physical sciences and engineering disciplines, but also because of the diversity of instrument data being developed today both by NASA and international partner agencies and because multi-discipline science and practitioner communities expect to have access to all types of observational data. This paper describes an approach to defining career-path guidance for college-bound high school and undergraduate engineering students, junior and senior engineers from various disciplines.

What Engineering Sophomores Know and Would Like to Know about Engineering Information Sources and Access

ERIC Educational Resources Information Center

Ercegovac, Zorana

2009-01-01

This exploratory study reports on what engineering undergraduate students know and would like to learn about engineering information sources and access. Responses were obtained on selected performance measures within the framework of "Information Literacy Standards for Science and Engineering/Technology" (ACRL/ALA/STS 2006). The results are based…

Information use skills in the engineering programme accreditation criteria of four countries

NASA Astrophysics Data System (ADS)

Bradley, Cara

2014-01-01

The need for twenty-first century information skills in engineering practice, combined with the importance for engineering programmes to meet accreditation requirements, suggests that it may be worthwhile to explore the potential for closer alignment between librarians and their work with information literacy competencies to assist in meeting accreditation standards and graduating students with high-level information skills. This article explores whether and how information use skills are reflected in engineering programme accreditation standards of four countries: Canada, the USA, the UK, and Australia. Results indicate that there is significant overlap between the information use skills required of students by engineering accreditation processes and librarians' efforts to develop information literacy competencies in students, despite differences in terms used to describe these skills. Increased collaboration between engineering faculty and librarians has the potential to raise student information literacy levels and fulfil the information use-related requirements of accreditation processes.

Hair cut

NASA Image and Video Library

2012-11-10

ISS033-E-018986 (10 Nov. 2012) --- Russian cosmonaut Evgeny Tarelkin, Expedition 33 flight engineer, trims the hair of Russian cosmonaut Oleg Novitskiy, flight engineer, in the Tranquility node of the International Space Station. Tarelkin used hair clippers fashioned with a vacuum device to garner freshly cut hair. NASA astronaut Kevin Ford, flight engineer, is visible in the background.

Examining Gender Inequality in a High School Engineering Course

ERIC Educational Resources Information Center

Riegle-Crumb, Catherine; Moore, Chelsea

2013-01-01

This paper examines gender inequality within the context of an upper-level high school engineering course recently offered in Texas. Data was collected from six high schools that serve students from a variety of backgrounds. Among the almost two hundred students who enrolled in this challenge-based engineering course, females constituted a clear…

Women in Engineering Education. Studies in Engineering Education 12.

ERIC Educational Resources Information Center

Michel, Jean

Engineering in higher education has the lowest proportion of women students when compared with other fields of study. This book discusses the issues and problems that face the training and promotion of women at the university level. Part one discusses the background and trends of female participation in different regions and disciplines of higher…

A Modern Approach to the Traditional Textbook: Bringing Introductory Geology Courses into the 21st Century

NASA Astrophysics Data System (ADS)

Workman Ford, K.; Ford, K. R.

2013-12-01

Undergraduate introductory geology courses are required in many colleges nationwide as part of the general education requirement. As a result, a large portion of those students are non-majors and most are not science majors. Textbooks used in these courses are often extensive with respect to the amount of material covered which tends to be overwhelming to the average student. Thus, students often purchase the pricey textbook but turn to their smartphones, notebooks, and laptops for answers. Before the development of the internet, students spent many hours in libraries and with their textbooks organizing and retrieving information. However, new technologies in the 21st century have essentially replaced traditional textbooks with students turning to online search engines, such as Google, to study and to complete homework assignments. Presently, online search engines may be more intuitive, but what's going on in the background isn't intuitive at all, and few students have a clear understanding of how search engines operate. Effectively this leads to students without the conception of how to build an adequate search strategy independent of search engines. Often, students are directed to online encyclopedias that may have erroneous information. Here, we employ an alternative to traditional textbooks and online search engines by implementing a guidebook with electronic resources for online activities and homework assignments. The proposed guidebook is roughly modeled after the American Geosciences Institute's Geoscience Handbook: AGI Data Sheets 4th, revised edition, and will include diagrams, graphs, charts, and pictures of basic geologic principles, processes, and earth materials. Along with the information, each topic will have online resources including sites for general reading, specific assignments that require visiting scientifically sound websites (i.e., USGS, GSA, AGU, Science, Nature), online self-assessment activities, and Google Earth activities. In addition, some elements would include a critical thinking problem wherein students research a topic without specific online resources provided, and compare what they find to reputable resources. This process is likely to drive students to evaluate their sources in a more critical manner. Given that textbooks are costly and sometimes overwhelming for students compelling them to use online search engines, the idea of a guidebook that encompasses electronic resources may engage the students more effectively, leading to a more comprehensive understanding and appreciation of the geosciences.

77 FR 43076 - Federal Acquisition Regulation; Information Collection; Value Engineering Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-23

...; Information Collection; Value Engineering Requirements AGENCIES: Department of Defense (DOD), General Services... collection requirement concerning Value Engineering Requirements. Public comments are particularly invited on... Information Collection 9000- 0027, Value Engineering Requirements, by any of the following methods...

Opportunities in Civil Engineering. [VGM Career Horizons Series].

ERIC Educational Resources Information Center

Hagerty, D. Joseph; Heer, John E., Jr.

This book presents information on career opportunities in civil engineering. Chapter 1 focuses on the scope of civil engineering, discussing: role of scientist, engineer, and technologists; engineering and engineering technology; civil engineer's role and obligations; and other information. Chapter 2 considers such aspects of the education for…

Clinical Decision Support Systems (CDSS) for preventive management of COPD patients

PubMed Central

2014-01-01

Background The use of information and communication technologies to manage chronic diseases allows the application of integrated care pathways, and the optimization and standardization of care processes. Decision support tools can assist in the adherence to best-practice medicine in critical decision points during the execution of a care pathway. Objectives The objectives are to design, develop, and assess a clinical decision support system (CDSS) offering a suite of services for the early detection and assessment of chronic obstructive pulmonary disease (COPD), which can be easily integrated into a healthcare providers' work-flow. Methods The software architecture model for the CDSS, interoperable clinical-knowledge representation, and inference engine were designed and implemented to form a base CDSS framework. The CDSS functionalities were iteratively developed through requirement-adjustment/development/validation cycles using enterprise-grade software-engineering methodologies and technologies. Within each cycle, clinical-knowledge acquisition was performed by a health-informatics engineer and a clinical-expert team. Results A suite of decision-support web services for (i) COPD early detection and diagnosis, (ii) spirometry quality-control support, (iii) patient stratification, was deployed in a secured environment on-line. The CDSS diagnostic performance was assessed using a validation set of 323 cases with 90% specificity, and 96% sensitivity. Web services were integrated in existing health information system platforms. Conclusions Specialized decision support can be offered as a complementary service to existing policies of integrated care for chronic-disease management. The CDSS was able to issue recommendations that have a high degree of accuracy to support COPD case-finding. Integration into healthcare providers' work-flow can be achieved seamlessly through the use of a modular design and service-oriented architecture that connect to existing health information systems. PMID:25471545

Synthetic biology: insights into biological computation.

PubMed

Manzoni, Romilde; Urrios, Arturo; Velazquez-Garcia, Silvia; de Nadal, Eulàlia; Posas, Francesc

2016-04-18

Organisms have evolved a broad array of complex signaling mechanisms that allow them to survive in a wide range of environmental conditions. They are able to sense external inputs and produce an output response by computing the information. Synthetic biology attempts to rationally engineer biological systems in order to perform desired functions. Our increasing understanding of biological systems guides this rational design, while the huge background in electronics for building circuits defines the methodology. In this context, biocomputation is the branch of synthetic biology aimed at implementing artificial computational devices using engineered biological motifs as building blocks. Biocomputational devices are defined as biological systems that are able to integrate inputs and return outputs following pre-determined rules. Over the last decade the number of available synthetic engineered devices has increased exponentially; simple and complex circuits have been built in bacteria, yeast and mammalian cells. These devices can manage and store information, take decisions based on past and present inputs, and even convert a transient signal into a sustained response. The field is experiencing a fast growth and every day it is easier to implement more complex biological functions. This is mainly due to advances in in vitro DNA synthesis, new genome editing tools, novel molecular cloning techniques, continuously growing part libraries as well as other technological advances. This allows that digital computation can now be engineered and implemented in biological systems. Simple logic gates can be implemented and connected to perform novel desired functions or to better understand and redesign biological processes. Synthetic biological digital circuits could lead to new therapeutic approaches, as well as new and efficient ways to produce complex molecules such as antibiotics, bioplastics or biofuels. Biological computation not only provides possible biomedical and biotechnological applications, but also affords a greater understanding of biological systems.

Lossless Brownian Information Engine

NASA Astrophysics Data System (ADS)

Paneru, Govind; Lee, Dong Yun; Tlusty, Tsvi; Pak, Hyuk Kyu

2018-01-01

We report on a lossless information engine that converts nearly all available information from an error-free feedback protocol into mechanical work. Combining high-precision detection at a resolution of 1 nm with ultrafast feedback control, the engine is tuned to extract the maximum work from information on the position of a Brownian particle. We show that the work produced by the engine achieves a bound set by a generalized second law of thermodynamics, demonstrating for the first time the sharpness of this bound. We validate a generalized Jarzynski equality for error-free feedback-controlled information engines.

Lossless Brownian Information Engine.

PubMed

Paneru, Govind; Lee, Dong Yun; Tlusty, Tsvi; Pak, Hyuk Kyu

2018-01-12

We report on a lossless information engine that converts nearly all available information from an error-free feedback protocol into mechanical work. Combining high-precision detection at a resolution of 1 nm with ultrafast feedback control, the engine is tuned to extract the maximum work from information on the position of a Brownian particle. We show that the work produced by the engine achieves a bound set by a generalized second law of thermodynamics, demonstrating for the first time the sharpness of this bound. We validate a generalized Jarzynski equality for error-free feedback-controlled information engines.

Multifuel rotary aircraft engine

NASA Technical Reports Server (NTRS)

Jones, C.; Berkowitz, M.

1980-01-01

The broad objectives of this paper are the following: (1) to summarize the Curtiss-Wright design, development and field testing background in the area of rotary aircraft engines; (2) to briefly summarize past activity and update development work in the area of stratified charge rotary combustion engines; and (3) to discuss the development of a high-performance direct injected unthrottled stratified charge rotary combustion aircraft engine. Efficiency improvements through turbocharging are also discussed.

Advanced rotary engines

NASA Technical Reports Server (NTRS)

Jones, C.

1983-01-01

The broad objectives of this paper are the following: (1) to summarize the Curtiss-Wright design, development and field testing background in the area of rotary aircraft engines; (2) to briefly summarize past activity and update development work in the area of stratified charge rotary combustion engines; and (3) to discuss the development of a high-performance direct injected unthrottled stratified charge rotary combustion aircraft engine. Efficiency improvements through turbocharging are also discussed.

Books on biotechnology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The books selected for this review could serve to establish or strengthen the background of the chemical engineer who seeks to enter the field of biotechnology, which is described as a field linking three different branches of science - microbiology, biochemistry and engineering. Nineteen books on biotechnology under the headings Science, Genetic Engineering, Biochemical Engineering, Biomass Energy, Directories and sourcebook are reviewed and titles of five other books received too late for comment given.

Industrial biosystems engineering and biorefinery systems.

PubMed

Chen, Shulin

2008-06-01

The concept of Industrial Biosystems Engineering (IBsE) was suggested as a new engineering branch to be developed for meeting the needs for science, technology and professionals by the upcoming bioeconomy. With emphasis on systems, IBsE builds upon the interfaces between systems biology, bioprocessing, and systems engineering. This paper discussed the background, the suggested definition, the theoretical framework and methodologies of this new discipline as well as its challenges and future development.

Engineering Review Information System

NASA Technical Reports Server (NTRS)

Grems, III, Edward G. (Inventor); Henze, James E. (Inventor); Bixby, Jonathan A. (Inventor); Roberts, Mark (Inventor); Mann, Thomas (Inventor)

2015-01-01

A disciplinal engineering review computer information system and method by defining a database of disciplinal engineering review process entities for an enterprise engineering program, opening a computer supported engineering item based upon the defined disciplinal engineering review process entities, managing a review of the opened engineering item according to the defined disciplinal engineering review process entities, and closing the opened engineering item according to the opened engineering item review.

Neurodevelopmental Malformations of the Cerebellar Vermis in Genetically Engineered Rats.

PubMed

Ramos, Raddy L; Van Dine, Sarah E; Gilbert, Mary E; Leheste, Joerg R; Torres, German

2015-12-01

The cerebellar vermis is particularly vulnerable to neurodevelopmental malformations in humans and rodents. Sprague-Dawley, and Long-Evans rats exhibit spontaneous cerebellar malformations consisting of heterotopic neurons and glia in the molecular layer of the vermis. Malformations are almost exclusively found along the primary fissure and are indicative of deficits of neuronal migration during cerebellar development. In the present report, we test the prediction that genetically engineered rats on Sprague-Dawley or Long-Evans backgrounds will also exhibit the same cerebellar malformations. Consistent with our hypothesis, we found that three different transgenic lines on two different backgrounds had cerebellar malformations. Heterotopia in transgenic rats had identical cytoarchitecture as that observed in wild-type rats including altered morphology of Bergmann glia. In light of the possibility that heterotopia could affect results from behavioral studies, these data suggest that histological analyses be performed in studies of cerebellar function or development when using genetically engineered rats on these backgrounds in order to have more careful interpretation of experimental findings.

16. INTERIOR VIEW OF HILLMAN FAN HOUSE ENGINE ROOM LOOKING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

16. INTERIOR VIEW OF HILLMAN FAN HOUSE ENGINE ROOM LOOKING EAST This overview of the 1883 Pittston Engine and Machine Company steam engine includes the flywheel and pillowblock in the foreground, with the shaft and cylinder in the background. The engine is a horizontal, slide valve type of 30 inch bore and 60 inch stroke that turned the fan at 49 revolutions per minute. - Dorrance Colliery Fan Complex, South side of Susquehanna River at Route 115 & Riechard Street, Wilkes-Barre, Luzerne County, PA

Engineering Information Infrastructure for Product Lifecycle Managment

NASA Astrophysics Data System (ADS)

Kimura, Fumihiko

For proper management of total product life cycle, it is fundamentally important to systematize design and engineering information about product systems. For example, maintenance operation could be more efficiently performed, if appropriate parts design information is available at the maintenance site. Such information shall be available as an information infrastructure for various kinds of engineering operations, and it should be easily accessible during the whole product life cycle, such as transportation, marketing, usage, repair/upgrade, take-back and recycling/disposal. Different from the traditional engineering database, life cycle support information has several characteristic requirements, such as flexible extensibility, distributed architecture, multiple viewpoints, long-time archiving, and product usage information, etc. Basic approaches for managing engineering information infrastructure are investigated, and various information contents and associated life cycle applications are discussed.

Aircraft engine and auxiliary power unit emissions from combusting JP-8 fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kimm, L.T.; Sylvia, D.A.; Gerstle, T.C.

1997-12-31

Due to safety considerations and in an effort to standardize Department of Defense fuels, the US Air Force (USAF) replaced the naptha-based JP-4, MIL-T-5624, with the kerosene-based JP-8, MIL-T-83133, as the standard turbine fuel. Although engine emissions from combustion of JP-4 are well documented for criteria pollutants, little information exists for criteria and hazardous air pollutants from combustion of JP-8 fuel. Due to intrinsic differences between these two raw fuels, their combustion products were expected to differ. As part of a broader engine testing program, the Air Force, through the Human Systems Center at Brooks AFB, TX, has contracted tomore » have the emissions characterized from aircraft engines and auxiliary power units (APUs). Criteria pollutant and targeted HAP emissions of selected USAF aircraft engines were quantified during the test program. Emission test results will be used to develop emission factors for the tested aircraft engines and APUs. The Air Force intends to develop a mathematical relationship, using the data collected during this series of tests and from previous tests, to extrapolate existing JP-4 emission factors to representative JP-8 emission factors for other engines. This paper reports sampling methodologies for the following aircraft engine emissions tests: F110-GE-100, F101-GE-102, TF33-P-102, F108-CF-100, T56-A-15, and T39-GE-1A/C. The UH-60A helicopter engine, T700-GE-700, and the C-5A/B and C-130H auxiliary power units (GTCP165-1 and GTCP85-180, respectively) were also tested. Testing was performed at various engine settings to determine emissions of particulate matter, carbon monoxide, nitrogen oxides, sulfur oxides, total hydrocarbon, and selected hazardous air pollutants. Ambient monitoring was conducted concurrently to establish background pollutant concentrations for data correction.« less

40 CFR 91.420 - CVS concept of exhaust gas sampling system.

Code of Federal Regulations, 2013 CFR

2013-07-01

... that complete mixing of the engine exhaust and background air is assured prior to the sampling probe.... The background probe must draw a representative sample of the background air during each sampling mode...) sampling system. If a critical flow venturi (CFV) is used on the dilute exhaust sample probe, this system...

40 CFR 91.420 - CVS concept of exhaust gas sampling system.

Code of Federal Regulations, 2010 CFR

2010-07-01

... that complete mixing of the engine exhaust and background air is assured prior to the sampling probe.... The background probe must draw a representative sample of the background air during each sampling mode...) sampling system. If a critical flow venturi (CFV) is used on the dilute exhaust sample probe, this system...

40 CFR 91.420 - CVS concept of exhaust gas sampling system.

Code of Federal Regulations, 2014 CFR

2014-07-01

... that complete mixing of the engine exhaust and background air is assured prior to the sampling probe.... The background probe must draw a representative sample of the background air during each sampling mode...) sampling system. If a critical flow venturi (CFV) is used on the dilute exhaust sample probe, this system...

40 CFR 91.420 - CVS concept of exhaust gas sampling system.

Code of Federal Regulations, 2011 CFR

2011-07-01

... that complete mixing of the engine exhaust and background air is assured prior to the sampling probe.... The background probe must draw a representative sample of the background air during each sampling mode...) sampling system. If a critical flow venturi (CFV) is used on the dilute exhaust sample probe, this system...

40 CFR 91.420 - CVS concept of exhaust gas sampling system.

Code of Federal Regulations, 2012 CFR

2012-07-01

... that complete mixing of the engine exhaust and background air is assured prior to the sampling probe.... The background probe must draw a representative sample of the background air during each sampling mode...) sampling system. If a critical flow venturi (CFV) is used on the dilute exhaust sample probe, this system...

Engineers Should Have a College Education. Research & Occasional Paper Series: CSHE.8.06

ERIC Educational Resources Information Center

King, C. Judson

2006-01-01

Many societal trends and needs call for engineers to broaden their outlooks, have more flexible career options, and work closely and effectively with persons of quite different backgrounds. Yet the education and general orientation of engineers have been directed inward toward the profession, rather than outward toward the rest of society and the…

Polytechnic Engineering Mathematics: Assessing Its Relevance to the Productivity of Industries in Uganda

ERIC Educational Resources Information Center

Jehopio, Peter J.; Wesonga, Ronald

2017-01-01

Background: The main objective of the study was to examine the relevance of engineering mathematics to the emerging industries. The level of abstraction, the standard of rigor, and the depth of theoretical treatment are necessary skills expected of a graduate engineering technician to be derived from mathematical knowledge. The question of whether…

ARO in Review 2012

DTIC Science & Technology

2012-01-01

promotes original research and experimentation in the sciences, engineering, and mathematics at the high school level and publicly recognizes students ...in programs that offered enrichment classes in engineering at universities through the UNITE program. 1,614 middle and high school students ...Research and Engineering Apprenticeship Program (REAP) REAP is designed to offer high school students the opportunity to expand their background and

Promoting Collaborative Problem-Solving Skills in a Course on Engineering Grand Challenges

ERIC Educational Resources Information Center

Zou, Tracy X. P.; Mickleborough, Neil C.

2015-01-01

The ability to solve problems with people of diverse backgrounds is essential for engineering graduates. A course on engineering grand challenges was designed to promote collaborative problem-solving (CPS) skills. One unique component is that students need to work both within their own team and collaborate with the other team to tackle engineering…

Examining Entrepreneurial Competencies and their Relationship to Self-Employment Intentions among Engineering Students: A Case Study from India

ERIC Educational Resources Information Center

Kumara, S. A. Vasantha; Kumar, Y. Vijaya

2010-01-01

The growth of technological institutions in India has been exponential and supply has exceeded demand in the job market. Against this background, it is a social responsibility of universities to provide alternative career options for engineering graduates. To encourage entrepreneurship careers among engineering graduates, the Visvesvarayya…

Advancing cognitive engineering methods to support user interface design for electronic health records

PubMed Central

Thyvalikakath, Thankam P.; Dziabiak, Michael P.; Johnson, Raymond; Torres-Urquidy, Miguel Humberto; Acharya, Amit; Yabes, Jonathan; Schleyer, Titus K.

2014-01-01

Background Despite many decades of research on the effective development of clinical systems in medicine, the adoption of health information technology to improve patient care continues to be slow, especially in ambulatory settings. This applies to dentistry as well, a primary care discipline with approximately 137,000 practitioners in the United States. A critical reason for slow adoption is the poor usability of clinical systems, which makes it difficult for providers to navigate through the information and obtain an integrated view of patient data. Objective In this study, we documented the cognitive processes and information management strategies used by dentists during a typical patient examination. The results will inform the design of a novel electronic dental record interface. Methods We conducted a cognitive task analysis (CTA) study to observe ten general dentists (five general dentists and five general dental faculty members, each with more than two years of clinical experience) examining three simulated patient cases using a think-aloud protocol. Results Dentists first reviewed the patient’s demographics, chief complaint, medical history and dental history to determine the general status of the patient. Subsequently, they proceeded to examine the patient’s intraoral status using radiographs, intraoral images, hard tissue and periodontal tissue information. The results also identified dentists’ patterns of navigation through patient’s information and additional information needs during a typical clinician-patient encounter. Conclusion This study reinforced the significance of applying cognitive engineering methods to inform the design of a clinical system. Second, applying CTA to a scenario closely simulating an actual patient encounter helped with capturing participants’ knowledge states and decision-making when diagnosing and treating a patient. The resultant knowledge of dentists’ patterns of information retrieval and review will significantly contribute to designing flexible and task-appropriate information presentation in electronic dental records. PMID:24503391

Characteristics Associated with Persistence and Retention among First-Generation College Students Majoring in Science, Technology, Engineering, or Math

NASA Astrophysics Data System (ADS)

Burnett, Lorie Lasseter

Persistence and retention of college students is a great concern in American higher education. The dropout rate is even more apparent among first-generation college students, as well as those majoring in science, technology, engineering, and math (STEM). More students earning STEM degrees are needed to fill the many jobs that require the skills obtained while in college. More importantly, those students who are associated with a low-socioeconomic background may use a degree to overcome poverty. Although many studies have been conducted to determine the characteristics associated with student attrition among first-generation students or STEM majors, very little information exists in terms of persistence and retention among the combined groups. The current qualitative study identified some of the characteristics associated with persistence and retention among first-generation college students who are also STEM majors. Participants were juniors or seniors enrolled at a regional 4-year institution. Face-to-face interviews were conducted to allow participants to share their personal experiences as first-generation STEM majors who continue to persist and be retained by their institution. Tinto's Theory of Individual Departure (1987) was used as a framework for the investigation. This theory emphasizes personal and academic background, personal goals, disconnecting from one's own culture, and institutional integration as predictors of persistence. The findings of the investigation revealed that persisting first-generation STEM majors are often connected to family, but have been able to separate that connection with that of the institution. They also are goal-driven and highly motivated and have had varied pre-college academic experiences. These students are academically integrated and socially integrated in some ways, but less than their non-first-generation counterparts. They are overcoming obstacles that students from other backgrounds may not experience. They receive support from their families and institution, but have diverse academic backgrounds. The findings show that a culmination of many characteristics have enabled the participants to persist and be retained by their institution.

Searching the Internet for information on prostate cancer screening: an assessment of quality.

PubMed

Ilic, Dragan; Risbridger, Gail; Green, Sally

2004-07-01

To identify how on-line information relating to prostate cancer screening (PCS) is best sourced, whether through general, medical, or meta-search engines, and to assess the quality of that information. Websites providing information about PCS were searched across 15 search engines representing three distinct types: general, medical, and meta-search engines. The quality of on-line information was assessed using the DISCERN quality assessment tool. Quality performance characteristics were analyzed by performing Mann-Whitney U tests. Search engine efficiency was measured by each search query as a percentage of the relevant websites included for analysis from the total returned and analyzed by performing Kruskal-Wallis analysis of variance. Of 6690 websites reviewed, 84 unique websites were identified as providing information relevant to PCS. General and meta-search engines were significantly more efficient at retrieving relevant information on PCS compared with medical search engines. The quality of information was variable, with most of a poor standard. Websites that provided referral links to other resources and a citation of evidence provided a significantly better quality of information. In contrast, websites offering a direct service were more likely to provide a significantly poorer quality of information. The current lack of a clear consensus on guidelines and recommendation in published data is also reflected by the variable quality of information found on-line. Specialized medical search engines were no more likely to retrieve relevant, high-quality information than general or meta-search engines.

78 FR 64209 - Information Collection Request Submitted to OMB for Review and Approval; Comment Request; Engine...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-28

... Reports and Voluntary Emission Recall Reports (Renewal) AGENCY: Environmental Protection Agency (EPA... request (ICR), Engine Emission Defect Information Reports and Voluntary Emission Recall Reports (EPA ICR... recall the engines. Engine manufacturers are required to submit Defect Information Reports (DIRs) if...

The Use of Web Search Engines in Information Science Research.

ERIC Educational Resources Information Center

Bar-Ilan, Judit

2004-01-01

Reviews the literature on the use of Web search engines in information science research, including: ways users interact with Web search engines; social aspects of searching; structure and dynamic nature of the Web; link analysis; other bibliometric applications; characterizing information on the Web; search engine evaluation and improvement; and…

Information Integration for Concurrent Engineering (IICE) IDEF3 Process Description Capture Method Report

DTIC Science & Technology

1992-05-01

methodology, knowledge acquisition, 140 requirements definition, information systems, information engineering, 16. PRICE CODE systems engineering...and knowledge resources. Like manpower, materials, and machines, information and knowledge assets are recognized as vital resources that can be...evolve towards an information -integrated enterprise. These technologies are designed to leverage information and knowledge resources as the key

Dynamic estimator for determining operating conditions in an internal combustion engine

DOEpatents

Hellstrom, Erik; Stefanopoulou, Anna; Jiang, Li; Larimore, Jacob

2016-01-05

Methods and systems are provided for estimating engine performance information for a combustion cycle of an internal combustion engine. Estimated performance information for a previous combustion cycle is retrieved from memory. The estimated performance information includes an estimated value of at least one engine performance variable. Actuator settings applied to engine actuators are also received. The performance information for the current combustion cycle is then estimated based, at least in part, on the estimated performance information for the previous combustion cycle and the actuator settings applied during the previous combustion cycle. The estimated performance information for the current combustion cycle is then stored to the memory to be used in estimating performance information for a subsequent combustion cycle.

Steve Nixon | NREL

Science.gov Websites

NREL. Steve has an extensive background in facilities engineering, facilities management, and Energy Manager, and a Project Management Professional. Prior to joining NREL, Steve was the Facilities manufacturing engineering, business application programming, and business process management positions

Acquisition Cycle Time: Defining the Problem

DTIC Science & Technology

2016-04-01

oversight and prescribe a more laissez - faire approach to acquisition. Others diagnose unaffordable ambitions and unnecessarily demanding requirements, and...treated as a subsystem. Systems engineering organizations need to engineer the software/avionics system – a change in leadership technical background

Making objective decisions in mechanical engineering problems

NASA Astrophysics Data System (ADS)

Raicu, A.; Oanta, E.; Sabau, A.

2017-08-01

Decision making process has a great influence in the development of a given project, the goal being to select an optimal choice in a given context. Because of its great importance, the decision making was studied using various science methods, finally being conceived the game theory that is considered the background for the science of logical decision making in various fields. The paper presents some basic ideas regarding the game theory in order to offer the necessary information to understand the multiple-criteria decision making (MCDM) problems in engineering. The solution is to transform the multiple-criteria problem in a one-criterion decision problem, using the notion of utility, together with the weighting sum model or the weighting product model. The weighted importance of the criteria is computed using the so-called Step method applied to a relation of preferences between the criteria. Two relevant examples from engineering are also presented. The future directions of research consist of the use of other types of criteria, the development of computer based instruments for decision making general problems and to conceive a software module based on expert system principles to be included in the Wiki software applications for polymeric materials that are already operational.

Whiplash Syndrome Reloaded: Digital Echoes of Whiplash Syndrome in the European Internet Search Engine Context

PubMed Central

2017-01-01

Background In many Western countries, after a motor vehicle collision, those involved seek health care for the assessment of injuries and for insurance documentation purposes. In contrast, in many less wealthy countries, there may be limited access to care and no insurance or compensation system. Objective The purpose of this infodemiology study was to investigate the global pattern of evolving Internet usage in countries with and without insurance and the corresponding compensation systems for whiplash injury. Methods We used the Internet search engine analytics via Google Trends to study the health information-seeking behavior concerning whiplash injury at national population levels in Europe. Results We found that the search for “whiplash” is strikingly and consistently often associated with the search for “compensation” in countries or cultures with a tort system. Frequent or traumatic painful injuries; diseases or disorders such as arthritis, headache, radius, and hip fracture; depressive disorders; and fibromyalgia were not associated similarly with searches on “compensation.” Conclusions In this study, we present evidence from the evolving viewpoint of naturalistic Internet search engine analytics that the expectations for receiving compensation may influence Internet search behavior in relation to whiplash injury. PMID:28347974

Context-Aware Online Commercial Intention Detection

NASA Astrophysics Data System (ADS)

Hu, Derek Hao; Shen, Dou; Sun, Jian-Tao; Yang, Qiang; Chen, Zheng

With more and more commercial activities moving onto the Internet, people tend to purchase what they need through Internet or conduct some online research before the actual transactions happen. For many Web users, their online commercial activities start from submitting a search query to search engines. Just like the common Web search queries, the queries with commercial intention are usually very short. Recognizing the queries with commercial intention against the common queries will help search engines provide proper search results and advertisements, help Web users obtain the right information they desire and help the advertisers benefit from the potential transactions. However, the intentions behind a query vary a lot for users with different background and interest. The intentions can even be different for the same user, when the query is issued in different contexts. In this paper, we present a new algorithm framework based on skip-chain conditional random field (SCCRF) for automatically classifying Web queries according to context-based online commercial intention. We analyze our algorithm performance both theoretically and empirically. Extensive experiments on several real search engine log datasets show that our algorithm can improve more than 10% on F1 score than previous algorithms on commercial intention detection.

Accessibility, nature and quality of health information on the Internet: a survey on osteoarthritis.

PubMed

Maloney, S; Ilic, D; Green, S

2005-03-01

This study aims to determine the quality and validity of information available on the Internet about osteoarthritis and to investigate the best way of sourcing this information. Keywords relevant to osteoarthritis were searched across 15 search engines representing medical, general and meta-search engines. Search engine efficiency was defined as the percentage of unique and relevant websites from all websites returned by each search engine. The quality of relevant information was appraised using the DISCERN tool and the concordance of the information offered by the website with the available evidence about osteoarthritis determined. A total of 3443 websites were retrieved, of which 344 were identified as unique and providing information relevant to osteoarthritis. The overall quality of website information was poor. There was no significant difference between types of search engine in sourcing relevant information; however, the information retrieved from medical search engines was of a higher quality. Fewer than a third of the websites identified as offering relevant information cited evidence to support their recommendations. Although the overall quality of website information about osteoarthritis was poor, medical search engines may provide consumers with the opportunity to source high-quality health information on the Internet. In the era of evidence-based medicine, one of the main obstacles to the Internet reaching its potential as a medical resource is the failure of websites to incorporate and attribute evidence-based information.

Optimal tuning of a confined Brownian information engine.

PubMed

Park, Jong-Min; Lee, Jae Sung; Noh, Jae Dong

2016-03-01

A Brownian information engine is a device extracting mechanical work from a single heat bath by exploiting the information on the state of a Brownian particle immersed in the bath. As for engines, it is important to find the optimal operating condition that yields the maximum extracted work or power. The optimal condition for a Brownian information engine with a finite cycle time τ has been rarely studied because of the difficulty in finding the nonequilibrium steady state. In this study, we introduce a model for the Brownian information engine and develop an analytic formalism for its steady-state distribution for any τ. We find that the extracted work per engine cycle is maximum when τ approaches infinity, while the power is maximum when τ approaches zero.

Collaborative Early Systems Engineering: Strategic Information Management Review

DTIC Science & Technology

2010-09-02

Early Systems Engineering: Strategic Information Management Review 2 Table of Contents Executive Summary...5  Center for Systems Engineering (CSE) .............................................................................. 6...Collaborative Early Systems Engineering .......................................................................... 6  Development Planning

View looking north west showing the boom, top of the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View looking north west showing the boom, top of the center mast and boom angle reeving of the 175-ton derrick. Note in the background of the view, just above the center mast is the F-1 Static-Test Stand used for test firing the Saturn V engines and subsequent program's engine testing. Also in the background center is the Redstone Static Test Stand (center right) and it's cold calibration tower (center left). - Marshall Space Flight Center, Saturn V Dynamic Test Facility, East Test Area, Huntsville, Madison County, AL

Information Technologies in the System of Military Engineer Training of Cadets

ERIC Educational Resources Information Center

Khizhnaya, Anna V.; Kutepov, Maksim M.; Gladkova, Marina N.; Gladkov, Alexey V.; Dvornikova, Elena I.

2016-01-01

The necessity of enhancement of the information component in the military engineer training is determined by the result of a comparative analysis of global and national engineering education standards. The purpose is to substantiate the effectiveness and relevance of applying information technology in the system of military engineer training of…

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 53: From student to entry-level professional: Examining the technical communications practices of early career-stage US aerospace engineers and scientists

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Holloway, Karen; Barclay, Rebecca O.; Kennedy, John M.

1995-01-01

Studies indicate that communications and information-related activities take up a substantial portion of an engineer's work week; therefore, effective communications and information-use skills are one of the key engineering competencies that early career-stage aerospace engineers and scientists must possess to be successful. Feedback from industry rates communications and information-use skills high in terms of their importance to engineering practice; however, this same feedback rates the communications and information-use skills of early career-stage engineers low. To gather adequate and generalizable data about the communications and information-related activities of entry-level aerospace engineers and scientists, we surveyed 264 members of the AIAA who have no more than 1-5 years of aerospace engineering work experience. To learn more about the concomitant communications norms, we compared the results of this study with data (1,673 responses) we collected from student members of the AIAA and with data (341 responses) we collected from a study of aerospace engineering professionals. In this paper, we report selected results from these studies that focused on the communications practices and information-related activities of early career-stage U.S. aerospace engineers and scientists in the workplace.

High School Graphics Experience Influencing the Self-Efficacy of First-Year Engineering Students in an Introductory Engineering Graphics Course

ERIC Educational Resources Information Center

Metraglia, Riccardo; Villa, Valerio; Baronio, Gabriele; Adamini, Riccardo

2015-01-01

Today's students enter engineering colleges with different technical backgrounds and prior graphics experience. This may due to their high school of provenience, which can be technical or non-technical. The prior experience affects students' ability in learning and hence their motivation and self-efficacy beliefs. This study intended to evaluate…

Concepts of Mathematics for Students of Physics and Engineering: A Dictionary

NASA Technical Reports Server (NTRS)

Kolecki, Joseph C.

2003-01-01

A physicist with an engineering background, the author presents a mathematical dictionary containing material encountered over many years of study and professional work at NASA. This work is a compilation of the author's experience and progress in the field of study represented and consists of personal notes and observations that can be used by students in physics and engineering.

On architecting and composing engineering information services to enable smart manufacturing

PubMed Central

Ivezic, Nenad; Srinivasan, Vijay

2016-01-01

Engineering information systems play an important role in the current era of digitization of manufacturing, which is a key component to enable smart manufacturing. Traditionally, these engineering information systems spanned the lifecycle of a product by providing interoperability of software subsystems through a combination of open and proprietary exchange of data. But research and development efforts are underway to replace this paradigm with engineering information services that can be composed dynamically to meet changing needs in the operation of smart manufacturing systems. This paper describes the opportunities and challenges in architecting such engineering information services and composing them to enable smarter manufacturing. PMID:27840595

Bioelectricity-AQA, one of the first MOOC courses in engineering.

PubMed

Barr, Roger C

2014-01-01

Bioelectricity-AQA was one of the first massively open online courses in engineering, having been given the first time via Coursera starting in September, 2012. This report provides some detail on its background, presentation, enrollment, and lessons learned.

The Better Mousetrap...Can Be Built by Engineers.

ERIC Educational Resources Information Center

McBride, Matthew

2003-01-01

Describes the growth of the INSPEC database developed by the Institution of Electrical Engineers. Highlights include an historical background of its growth from "Science Abstracts"; production methods, including computerization; indexing, including controlled (thesaurus-based), uncontrolled, chemical, and numerical indexing; and the…

U.S. Air Force Bomber Sustainment and Modernization: Background and Issues for Congress

DTIC Science & Technology

2014-06-04

turbofan Thrust: Each engine up to 17,000 pounds Wingspan: 185 feet (56.4 meters) Length: 159 feet, 4 inches (48.5 meters) Height: 40 feet, 8...precision and non-precision weapons. Features The B-1B’s blended wing and body configuration, variable-geometry wings, and turbofan afterburning engines... turbofan engine with afterburner Thrust: 30,000-plus pounds with afterburner, per engine Wingspan: 137 feet (41.8 meters) extended forward, 79 feet

Using Collaborative Engineering to Inform Collaboration Engineering

NASA Technical Reports Server (NTRS)

Cooper, Lynne P.

2012-01-01

Collaboration is a critical competency for modern organizations as they struggle to compete in an increasingly complex, global environment. A large body of research on collaboration in the workplace focuses both on teams, investigating how groups use teamwork to perform their task work, and on the use of information systems to support team processes ("collaboration engineering"). This research essay presents collaboration from an engineering perspective ("collaborative engineering"). It uses examples from professional and student engineering teams to illustrate key differences in collaborative versus collaboration engineering and investigates how challenges in the former can inform opportunities for the latter.

Ceramics in Restorative and Prosthetic DENTISTRY1

NASA Astrophysics Data System (ADS)

Kelly, J. Robert

1997-08-01

This review is intended to provide the ceramic engineer with information about the history and current use of ceramics in dentistry, contemporary research topics, and potential research agenda. Background material includes intra-oral design considerations, descriptions of ceramic dental components, and the origin, composition, and microstructure of current dental ceramics. Attention is paid to efforts involving net-shape processing, machining as a forming method, and the analysis of clinical failure. A rationale is presented for the further development of all-ceramic restorative systems. Current research topics receiving attention include microstructure/processing/property relationships, clinical failure mechanisms and in vitro testing, wear damage and wear testing, surface treatments, and microstructural modifications. The status of the field is critically reviewed with an eye toward future work. Significant improvements seem possible in the clinical use of ceramics based on engineering solutions derived from the study of clinically failed restorations, on the incorporation of higher levels of "biomimicry" in new systems, and on the synergistic developments in dental cements and adhesive dentin bonding.

Systems Security Engineering

DTIC Science & Technology

2010-08-22

Commission (IEC). “Information technology — Security techniques — Code of practice for information security management ( ISO /IEC 27002 ...Information technology — Security techniques — Information security management systems —Requirements ( ISO /IEC 27002 ),”, “Information technology — Security...was a draft ISO standard on Systems and software engineering, Systems and software assurance [18]. Created by systems engineers for systems

Characterizing Internet Searchers of Smoking Cessation Information

PubMed Central

Graham, Amanda L

2006-01-01

Background The Internet is a viable channel to deliver evidence-based smoking cessation treatment that has the potential to make a large population impact on reducing smoking prevalence. There is high demand for smoking cessation information and support on the Internet. Approximately 7% (10.2 million) of adult American Internet users have searched for information on quitting smoking. Little is known about these individuals, their smoking status, what type of cessation services they are seeking on the Internet, or how frequently these searches for cessation information are conducted. Objective The primary goal of this study was to characterize individuals who search for smoking cessation information on the Internet to determine appropriate triage and treatment strategies. The secondary goal was to estimate the incidence of searches for cessation information using publicly available search engine data. Methods We recruited individuals who clicked on a link to a leading smoking cessation website (QuitNet) from within the results of a search engine query. Individuals were “intercepted” before seeing the QuitNet home page and were invited to participate in the study. Those accepting the invitation were routed to an online survey about demographics, smoking characteristics, preferences for specific cessation services, and Internet search patterns. To determine the generalizability of our sample, national datasets on search engine usage patterns, market share, and keyword rankings were examined. These datasets were then used to estimate the number of queries for smoking cessation information each year. Results During the 10-day study period, 2265 individuals were recruited and 29% (N = 655) responded. Of these, 59% were female and overall tended to be younger than the previously characterized general Internet population. Most (76%) respondents were current smokers; 17% had quit within the last 7 days, and 7% had quit more than 7 days ago. Slightly more than half of active smokers (53%) indicated that they were planning to quit in the next 30 days. Smokers were more likely to seek information on how to quit and on medications; former smokers were more interested in how to cope with withdrawal. All participants rated withdrawal information and individually tailored information as being more useful, while displaying little interest in telephone counseling, expert support, or peer support. Publicly available data from large search engines suggest that 4 million Americans search for resources on smoking cessation each year. Conclusions This study adds to the limited data available on individuals who search for smoking cessation information on the Internet, supports the prior estimates of the size of the population, and indicates that these individuals are in appropriate stages for both active cessation interventions and aggressive relapse prevention efforts. Continued development and evaluation of online interventions is warranted, and organizations seeking to promote cessation should carefully evaluate the Internet as a possible modality for treatment and as a gateway to other traditional programs. PMID:17032633

Plant adaptation to low atmospheric pressures: potential molecular responses

NASA Technical Reports Server (NTRS)

Ferl, Robert J.; Schuerger, Andrew C.; Paul, Anna-Lisa; Gurley, William B.; Corey, Kenneth; Bucklin, Ray

2002-01-01

There is an increasing realization that it may be impossible to attain Earth normal atmospheric pressures in orbital, lunar, or Martian greenhouses, simply because the construction materials do not exist to meet the extraordinary constraints imposed by balancing high engineering requirements against high lift costs. This equation essentially dictates that NASA have in place the capability to grow plants at reduced atmospheric pressure. Yet current understanding of plant growth at low pressures is limited to just a few experiments and relatively rudimentary assessments of plant vigor and growth. The tools now exist, however, to make rapid progress toward understanding the fundamental nature of plant responses and adaptations to low pressures, and to develop strategies for mitigating detrimental effects by engineering the growth conditions or by engineering the plants themselves. The genomes of rice and the model plant Arabidopsis thaliana have recently been sequenced in their entirety, and public sector and commercial DNA chips are becoming available such that thousands of genes can be assayed at once. A fundamental understanding of plant responses and adaptation to low pressures can now be approached and translated into procedures and engineering considerations to enhance plant growth at low atmospheric pressures. In anticipation of such studies, we present here the background arguments supporting these contentions, as well as informed speculation about the kinds of molecular physiological responses that might be expected of plants in low-pressure environments.

Using the sound of nuclear energy

DOE PAGES

Garrett, Steven; Smith, James; Smith, Robert; ...

2016-08-01

The generation of sound by heat has been documented as an “acoustical curiosity” since a Buddhist monk reported the loud tone generated by a ceremonial rice-cooker in his diary, in 1568. Over the last four decades, significant progress has been made in understanding “thermoacoustic processes,” enabling the design of thermoacoustic engines and refrigerators. Motivated by the Fukushima nuclear reactor disaster, we have developed and tested a thermoacoustic engine that exploits the energy-rich conditions in the core of a nuclear reactor to provide core condition information to the operators without a need for external electrical power. The heat engine is self-poweredmore » and can wirelessly transmit the temperature and reactor power level by generation of a pure tone which can be detected outside the reactor. We report here the first use of a fission-powered thermoacoustic engine capable of serving as a performance and safety sensor in the core of a research reactor and present data from the hydrophones in the coolant (far from the core) and an accelerometer attached to a structure outside the reactor. These measurements confirmed that the frequency of the sound produced indicates the reactor’s coolant temperature and that the amplitude (above an onset threshold) is related to the reactor’s operating power level. Furthermore, these signals can be detected even in the presence of substantial background noise generated by the reactor’s fluid pumps.« less

Using the sound of nuclear energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garrett, Steven; Smith, James; Smith, Robert

The generation of sound by heat has been documented as an “acoustical curiosity” since a Buddhist monk reported the loud tone generated by a ceremonial rice-cooker in his diary, in 1568. Over the last four decades, significant progress has been made in understanding “thermoacoustic processes,” enabling the design of thermoacoustic engines and refrigerators. Motivated by the Fukushima nuclear reactor disaster, we have developed and tested a thermoacoustic engine that exploits the energy-rich conditions in the core of a nuclear reactor to provide core condition information to the operators without a need for external electrical power. The heat engine is self-poweredmore » and can wirelessly transmit the temperature and reactor power level by generation of a pure tone which can be detected outside the reactor. We report here the first use of a fission-powered thermoacoustic engine capable of serving as a performance and safety sensor in the core of a research reactor and present data from the hydrophones in the coolant (far from the core) and an accelerometer attached to a structure outside the reactor. These measurements confirmed that the frequency of the sound produced indicates the reactor’s coolant temperature and that the amplitude (above an onset threshold) is related to the reactor’s operating power level. Furthermore, these signals can be detected even in the presence of substantial background noise generated by the reactor’s fluid pumps.« less

75 FR 42437 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-21

...; Comment Request; Engine Emission Defect Information Reports and Voluntary Emission Recall Reports (Renewal... Information Reports and Voluntary Emission Recall Reports (Renewal). ICR numbers: EPA ICR No. 0282.15, OMB... is required to recall the engines. Engine manufacturers are required to submit Defect Information...

Educating Engineers in Information Utilization.

ERIC Educational Resources Information Center

Borovansky, Vladimir T.

1987-01-01

Traditionally engineers are not heaviest users of information resources. This can be traced to lack of emphasis on information sources in engineering education. Failure to use available knowledge leads to reinventing the wheel and losing the race for technological superiority. Few U.S. universities offer formal courses in information resources in…

Engineers as Information Processors: A Survey of US Aerospace Engineering Faculty and Students.

ERIC Educational Resources Information Center

Holland, Maurita Peterson; And Others

1991-01-01

Reports on survey results from 275 faculty and 640 students, predominantly in the aerospace engineering field, concerning their behaviors about the appropriation and dissemination of information. Indicates that, as information processors, aerospace faculty and students are "information naive." Raises questions about the efficacy of…

Information technology security system engineering methodology

NASA Technical Reports Server (NTRS)

Childs, D.

2003-01-01

A methodology is described for system engineering security into large information technology systems under development. The methodology is an integration of a risk management process and a generic system development life cycle process. The methodology is to be used by Security System Engineers to effectively engineer and integrate information technology security into a target system as it progresses through the development life cycle. The methodology can also be used to re-engineer security into a legacy system.

76 FR 61118 - Advisory Committee for Computer and Information Science and Engineering; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-03

... Engineering; Notice of Meeting In accordance with the Federal Advisory Committee Act (Pub. L. 92- 463, as... Computer and Information Science and Engineering (1115). Date and Time: November 1, 2011 from 12 p.m.-5:30... Computer and Information Science and Engineering, National Science Foundation, 4201 Wilson Blvd., Suite...

Bioelectricity-AQA, one of the first MOOC courses in Engineering

PubMed Central

Barr, Roger C.

2014-01-01

Bioelectricity-AQA was one of the first massively open online courses in engineering, having been given the first time via Coursera starting in September, 2012. This report provides some detail on its background, presentation, enrollment, and lessons learned. PMID:25570327

ARC-2009-ACD09-0220-126

NASA Image and Video Library

2009-10-09

LCROSS Impact Night From left to right: Khanh Trinh (Simulator Engineer), and Dan Andrews (LCROSS Project Manager) in background, John Bresina (Command Sequencing Engineer), and John Schreiner (Mission Operations Manager), shake hands after confirmation the LCROSS spacecraft successfully impacted its target crater on the moon.

1. CHANNEL DIMENSIONS AND ALIGNMENT RESEARCH INSTRUMENTATION. ENGINEERING TECHNICIAN WITH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. CHANNEL DIMENSIONS AND ALIGNMENT RESEARCH INSTRUMENTATION. ENGINEERING TECHNICIAN WITH VIDEO-CONTROLED MODEL BOAT IN MODEL NAVIGATION CHANNEL. NOTE CONTROL TRAILER IN BACKGROUND. - Waterways Experiment Station, Hydraulics Laboratory, Halls Ferry Road, 2 miles south of I-20, Vicksburg, Warren County, MS

Modelling and Simulation of Search Engine

NASA Astrophysics Data System (ADS)

Nasution, Mahyuddin K. M.

2017-01-01

The best tool currently used to access information is a search engine. Meanwhile, the information space has its own behaviour. Systematically, an information space needs to be familiarized with mathematics so easily we identify the characteristics associated with it. This paper reveal some characteristics of search engine based on a model of document collection, which are then estimated the impact on the feasibility of information. We reveal some of characteristics of search engine on the lemma and theorem about singleton and doubleton, then computes statistically characteristic as simulating the possibility of using search engine. In this case, Google and Yahoo. There are differences in the behaviour of both search engines, although in theory based on the concept of documents collection.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 14: Engineering work and information use in aerospace: Results of a telephone survey

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Kennedy, John M.; White, Terry F.

1992-01-01

A telephone survey of U.S. aerospace engineers and scientists who were on the Society of Automotive Engineers (SAE) mailing list was conducted between August 14-26, 1991. The survey was undertaken to obtain information on the daily work activities of aerospace engineers and scientists, to measure various practices used by aerospace engineers and scientists to obtain STI, and to ask aerospace engineers and scientists about their use of electronic networks. Co-workers were found important sources of information. Co-workers are used to obtain technical information because the information they have is relevant, not because co-workers are accessible. As technical uncertainty increases, so does the need for information internal and external to the organization. Electronic networks enjoy widespread use within the aerospace community. These networks are accessible and they are used to contact people at remote sites. About 80 percent of the respondents used electronic mail, file transfer, and information or data retrieval to commercial or in-house data bases.

Research on the optimization strategy of web search engine based on data mining

NASA Astrophysics Data System (ADS)

Chen, Ronghua

2018-04-01

With the wide application of search engines, web site information has become an important way for people to obtain information. People have found that they are growing in an increasingly explosive manner. Web site information is verydifficult to find the information they need, and now the search engine can not meet the need, so there is an urgent need for the network to provide website personalized information service, data mining technology for this new challenge is to find a breakthrough. In order to improve people's accuracy of finding information from websites, a website search engine optimization strategy based on data mining is proposed, and verified by website search engine optimization experiment. The results show that the proposed strategy improves the accuracy of the people to find information, and reduces the time for people to find information. It has an important practical value.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 20: Engineers as information processors: A survey of US aerospace engineering faculty and students

NASA Technical Reports Server (NTRS)

Holland, Maurita Peterson; Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1991-01-01

U.S. aerospace engineering faculty and students were surveyed as part of the NASA/DoD Aerospace Knowledge Research Project. Faculty and students were viewed as information processors within a conceptual framework of information seeking behavior. Questionnaires were received from 275 faculty members and 640 students, which were used to determine: (1) use and importance of information sources; (2) use of specific print sources and electronic data bases; (3) use of information technology; and (4) the influence of instruction on the use of information sources and the products of faculty and students. Little evidence was found to support the belief that instruction in library or engineering information use has significant impact either on broadening the frequency or range of information products and sources used by U.S. aerospace engineering students.

Using Internet search engines to obtain medical information: a comparative study.

PubMed

Wang, Liupu; Wang, Juexin; Wang, Michael; Li, Yong; Liang, Yanchun; Xu, Dong

2012-05-16

The Internet has become one of the most important means to obtain health and medical information. It is often the first step in checking for basic information about a disease and its treatment. The search results are often useful to general users. Various search engines such as Google, Yahoo!, Bing, and Ask.com can play an important role in obtaining medical information for both medical professionals and lay people. However, the usability and effectiveness of various search engines for medical information have not been comprehensively compared and evaluated. To compare major Internet search engines in their usability of obtaining medical and health information. We applied usability testing as a software engineering technique and a standard industry practice to compare the four major search engines (Google, Yahoo!, Bing, and Ask.com) in obtaining health and medical information. For this purpose, we searched the keyword breast cancer in Google, Yahoo!, Bing, and Ask.com and saved the results of the top 200 links from each search engine. We combined nonredundant links from the four search engines and gave them to volunteer users in an alphabetical order. The volunteer users evaluated the websites and scored each website from 0 to 10 (lowest to highest) based on the usefulness of the content relevant to breast cancer. A medical expert identified six well-known websites related to breast cancer in advance as standards. We also used five keywords associated with breast cancer defined in the latest release of Systematized Nomenclature of Medicine-Clinical Terms (SNOMED CT) and analyzed their occurrence in the websites. Each search engine provided rich information related to breast cancer in the search results. All six standard websites were among the top 30 in search results of all four search engines. Google had the best search validity (in terms of whether a website could be opened), followed by Bing, Ask.com, and Yahoo!. The search results highly overlapped between the search engines, and the overlap between any two search engines was about half or more. On the other hand, each search engine emphasized various types of content differently. In terms of user satisfaction analysis, volunteer users scored Bing the highest for its usefulness, followed by Yahoo!, Google, and Ask.com. Google, Yahoo!, Bing, and Ask.com are by and large effective search engines for helping lay users get health and medical information. Nevertheless, the current ranking methods have some pitfalls and there is room for improvement to help users get more accurate and useful information. We suggest that search engine users explore multiple search engines to search different types of health information and medical knowledge for their own needs and get a professional consultation if necessary.

Engine control techniques to account for fuel effects

DOEpatents

Kumar, Shankar; Frazier, Timothy R.; Stanton, Donald W.; Xu, Yi; Bunting, Bruce G.; Wolf, Leslie R.

2014-08-26

A technique for engine control to account for fuel effects including providing an internal combustion engine and a controller to regulate operation thereof, the engine being operable to combust a fuel to produce an exhaust gas; establishing a plurality of fuel property inputs; establishing a plurality of engine performance inputs; generating engine control information as a function of the fuel property inputs and the engine performance inputs; and accessing the engine control information with the controller to regulate at least one engine operating parameter.

75 FR 19428 - Advisory Committee for Computer and Information Science and Engineering; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-14

... Engineering; Notice of Meeting In accordance with the Federal Advisory Committee Act (Pub. L. 92- 463, as... Computer and Information Science and Engineering--(1115). Date and Time: May 7, 2010, 8:30 a.m.-5 p.m... Information Science and Engineering at 703/292-8900 prior to the meeting so that a visitor's badge may be...

77 FR 66873 - Advisory Committee for Computer and Information Science and Engineering; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-07

... Engineering; Notice of Meeting In accordance with Federal Advisory Committee Act (Pub. L. 92-463, as amended... and Information Science and Engineering (1115). Date/Time: November 28, 2012: 12:00 p.m. to 5:30 p.m... Information Science and Engineering (CISE) community. To provide advice to the Assistant Director for CISE on...

Information engineering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunt, D.N.

1997-02-01

The Information Engineering thrust area develops information technology to support the programmatic needs of Lawrence Livermore National Laboratory`s Engineering Directorate. Progress in five programmatic areas are described in separate reports contained herein. These are entitled Three-dimensional Object Creation, Manipulation, and Transport, Zephyr:A Secure Internet-Based Process to Streamline Engineering Procurements, Subcarrier Multiplexing: Optical Network Demonstrations, Parallel Optical Interconnect Technology Demonstration, and Intelligent Automation Architecture.

Principles of Sociology in Systems Engineering

NASA Technical Reports Server (NTRS)

Watson, Michael D.; Andrews, James G.; Larsen, Jordan A.

2017-01-01

Systems engineering involves both the integration of the system and the integration of the disciplines which develop and operate the system. Integrating the disciplines is a sociological effort to bring together different groups, often with different terminology, to achieve a common goal, the system. The focus for the systems engineer is information flow through the organization, between the disciplines, to ensure the system is developed and operated with all relevant information informing system decisions. Robert K. Merton studied the sociological principles of the sciences and the sociological principles he developed apply to systems engineering. Concepts such as specification of ignorance, common terminology, opportunity structures, role-sets, and the reclama (reconsideration) process are all important sociological approaches that should be employed by the systems engineer. In bringing the disciplines together, the systems engineer must also be wary of social ambivalence, social anomie, social dysfunction, insider-outsider behavior, unintended consequences, and the self-fulfilling prophecy. These sociological principles provide the systems engineer with key approaches to manage the information flow through the organization as the disciplines are integrated and share their information. This also helps identify key sociological barriers to information flow through the organization. This paper will discuss this theoretical basis for the application of sociological principles to systems engineering.

Hydrocarbon-Fueled Rocket Engine Plume Diagnostics: Analytical Developments and Experimental Results

NASA Technical Reports Server (NTRS)

Tejwani, Gopal D.; McVay, Gregory P.; Langford, Lester A.; St. Cyr, William W.

2006-01-01

A viewgraph presentation describing experimental results and analytical developments about plume diagnostics for hydrocarbon-fueled rocket engines is shown. The topics include: 1) SSC Plume Diagnostics Background; 2) Engine Health Monitoring Approach; 3) Rocket Plume Spectroscopy Simulation Code; 4) Spectral Simulation for 10 Atomic Species and for 11 Diatomic Molecular Electronic Bands; 5) "Best" Lines for Plume Diagnostics for Hydrocarbon-Fueled Rocket Engines; 6) Experimental Set Up for the Methane Thruster Test Program and Experimental Results; and 7) Summary and Recommendations.

Development of a Noninterference Technique for Measurement of Turbine Engine Compressor Blade Stress

DTIC Science & Technology

1980-06-01

TECHNIQUE FOR MEASUREMENT OF TURBINE ENGINE COMPRESSOR BLADE STRESS 7 A U T H O R ( s ) P . E. M c C a r t y a n d J . W. Thompson , J r...e a e a ~ and tdentJ~ by b|ock numbe~ A noninterference technique for measuring stress in compressor blades of turbine engines is being developed...43 4 AEDC-TR-79-78 1.0 INTRODUCTION 1.1 BACKGROUND Compressor rotor blades in turbojet engines are subjected to

Accessible engineering drawings for visually impaired machine operators.

PubMed

Ramteke, Deepak; Kansal, Gayatri; Madhab, Benu

2014-01-01

An engineering drawing provides manufacturing information to a machine operator. An operator plans and executes machining operations based on this information. A visually impaired (VI) operator does not have direct access to the drawings. Drawing information is provided to them verbally or by using sample parts. Both methods have limitations that affect the quality of output. Use of engineering drawings is a standard practice for every industry; this hampers employment of a VI operator. Accessible engineering drawings are required to increase both independence, as well as, employability of VI operators. Today, Computer Aided Design (CAD) software is used for making engineering drawings, which are saved in CAD files. Required information is extracted from the CAD files and converted into Braille or voice. The authors of this article propose a method to make engineering drawings information directly accessible to a VI operator.

Development of Health Information Search Engine Based on Metadata and Ontology

PubMed Central

Song, Tae-Min; Jin, Dal-Lae

2014-01-01

Objectives The aim of the study was to develop a metadata and ontology-based health information search engine ensuring semantic interoperability to collect and provide health information using different application programs. Methods Health information metadata ontology was developed using a distributed semantic Web content publishing model based on vocabularies used to index the contents generated by the information producers as well as those used to search the contents by the users. Vocabulary for health information ontology was mapped to the Systematized Nomenclature of Medicine Clinical Terms (SNOMED CT), and a list of about 1,500 terms was proposed. The metadata schema used in this study was developed by adding an element describing the target audience to the Dublin Core Metadata Element Set. Results A metadata schema and an ontology ensuring interoperability of health information available on the internet were developed. The metadata and ontology-based health information search engine developed in this study produced a better search result compared to existing search engines. Conclusions Health information search engine based on metadata and ontology will provide reliable health information to both information producer and information consumers. PMID:24872907

Development of health information search engine based on metadata and ontology.

PubMed

Song, Tae-Min; Park, Hyeoun-Ae; Jin, Dal-Lae

2014-04-01

The aim of the study was to develop a metadata and ontology-based health information search engine ensuring semantic interoperability to collect and provide health information using different application programs. Health information metadata ontology was developed using a distributed semantic Web content publishing model based on vocabularies used to index the contents generated by the information producers as well as those used to search the contents by the users. Vocabulary for health information ontology was mapped to the Systematized Nomenclature of Medicine Clinical Terms (SNOMED CT), and a list of about 1,500 terms was proposed. The metadata schema used in this study was developed by adding an element describing the target audience to the Dublin Core Metadata Element Set. A metadata schema and an ontology ensuring interoperability of health information available on the internet were developed. The metadata and ontology-based health information search engine developed in this study produced a better search result compared to existing search engines. Health information search engine based on metadata and ontology will provide reliable health information to both information producer and information consumers.

Synthetic Biology and the U.S. Biotechnology Regulatory System: Challenges and Options

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carter, Sarah R.; Rodemeyer, Michael; Garfinkel, Michele S.

Synthetic Biology and the U.S. Biotechnology Regulatory System: Challenges and Options Sarah R. Carter, Ph.D., J. Craig Venter Institute; Michael Rodemeyer, J.D., University of Virginia; Michele S. Garfinkel, Ph.D., EMBO; Robert M. Friedman, Ph.D., J. Craig Venter Institute In recent years, a range of genetic engineering techniques referred to as “synthetic biology” has significantly expanded the tool kit available to scientists and engineers, providing them with far greater capabilities to engineer organisms than previous techniques allowed. The field of synthetic biology includes the relatively new ability to synthesize long pieces of DNA from chemicals, as well as improved methods formore » genetic manipulation and design of genetic pathways to achieve more precise control of biological systems. These advances will help usher in a new generation of genetically engineered microbes, plants, and animals. The JCVI Policy Center team, along with researchers at the University of Virginia and EMBO, examined how well the current U.S. regulatory system for genetically engineered products will handle the near-term introduction of organisms engineered using synthetic biology. In particular, the focus was on those organisms intended to be used or grown directly in the environment, outside of a contained facility. The study concludes that the U.S. regulatory agencies have adequate legal authority to address most, but not all, potential environmental, health and safety concerns posed by these organisms. Such near-term products are likely to represent incremental changes rather than a marked departure from previous genetically engineered organisms. However, the study also identified two key challenges for the regulatory system, which are detailed in the report. First, USDA’s authority over genetically engineered plants depends on the use of an older engineering technique that is no longer necessary for many applications. The shift to synthetic biology and other newer genetic engineering techniques will leave many engineered plants without any pre-market regulatory review. Second, the number and diversity of engineered microbes for commercial use will increase in the near future, challenging EPA’s resources, expertise, and perhaps authority to regulate them. For each of these challenges, the report sets out a series of options, including an analysis of the advantages and disadvantages of each option from a variety of perspectives, for policy makers to consider. Policy responses will depend on the trade-offs chosen among competing considerations. This report, funded by the Department of Energy with additional funds from the Alfred P. Sloan Foundation, is the result of a two-year process that included interviews, commissioned background papers, discussions, and two workshops that sought input from a wide range of experts, including U.S. federal agency regulators, legal and science policy experts, representatives from the biotechnology indus¬try, and non-governmental organiza¬tions. This cross-section of views informed this report, but the conclusions are solely those of the authors. An Executive Summary, full Report, and background papers are available at: http://www.jcvi.org/cms/research/projects/synthetic-biology-and-the-us-biotechnology-regulatory-system/overview/« less

A Survey of Current Trends in Master's Programs in Microelectronics

ERIC Educational Resources Information Center

Bozanic, Mladen; Sinha, Saurabh

2018-01-01

Contribution: This paper brings forward a paradigm shift in microelectronic and nanoelectronic engineering education. Background: An increasing number of universities are offering graduate-level electrical engineering degree programs with multi-disciplinary Master's-level specialization in microelectronics or nanoelectronics. The paradigm shift…

Re-Engineering Graduate Skills--A Case Study

ERIC Educational Resources Information Center

Nair, Chenicheri Sid; Patil, Arun; Mertova, Patricie

2009-01-01

Research on student-learning outcomes indicates that university graduates do not possess important skills required by employers, such as communication, decision-making, problem-solving, leadership, emotional intelligence, social ethics skills as well as the ability to work with people of different backgrounds. Today, engineering graduates are…

Engineering industrial Saccharomyces cerevisiae strains for xylose fermentation and comparison for switchgrass conversion.

PubMed

Hector, Ronald E; Dien, Bruce S; Cotta, Michael A; Qureshi, Nasib

2011-09-01

Saccharomyces' physiology and fermentation-related properties vary broadly among industrial strains used to ferment glucose. How genetic background affects xylose metabolism in recombinant Saccharomyces strains has not been adequately explored. In this study, six industrial strains of varied genetic background were engineered to ferment xylose by stable integration of the xylose reductase, xylitol dehydrogenase, and xylulokinase genes. Aerobic growth rates on xylose were 0.04-0.17 h(-1). Fermentation of xylose and glucose/xylose mixtures also showed a wide range of performance between strains. During xylose fermentation, xylose consumption rates were 0.17-0.31 g/l/h, with ethanol yields 0.18-0.27 g/g. Yields of ethanol and the metabolite xylitol were positively correlated, indicating that all of the strains had downstream limitations to xylose metabolism. The better-performing engineered and parental strains were compared for conversion of alkaline pretreated switchgrass to ethanol. The engineered strains produced 13-17% more ethanol than the parental control strains because of their ability to ferment xylose.

An appraisal of an online tutorial system for the teaching and learning of engineering physics in conjunction with contextual physics and mathematics, and relevant mathematics

NASA Astrophysics Data System (ADS)

Bhathal, Ragbir

2016-09-01

The number of students entering engineering schools in Australian universities has increased tremendously over the last few years because of the Australian Federal Government's policy of increasing the participation rates of Higher School Certificate students and students from low social economic status backgrounds in the tertiary sector. They now come with a diverse background of skills, motivations and prior knowledge. It is imperative that new methods of teaching and learning be developed. This paper describes an online tutorial system used in conjunction with contextual physics and mathematics, and the revision of the relevant mathematical knowledge at the appropriate time before a new topic is introduced in the teaching and learning of engineering physics. Taken as a whole, this study shows that students not only improved their final examination results but there was also an increase in the retention rate of first-year engineering students which has financial implications for the university.

How do Consumers Search for and Appraise Information on Medicines on the Internet? A Qualitative Study Using Focus Groups

PubMed Central

Aslani, Parisa; Williams, Kylie A

2003-01-01

Background Many consumers use the Internet to find information about their medicines. It is widely acknowledged that health information on the Internet is of variable quality and therefore the search and appraisal skills of consumers are important for selecting and assessing this information. The way consumers choose and evaluate information on medicines on the Internet is important because it has been shown that written information on medicines can influence consumer attitudes to and use of medicines. Objective To explore consumer experiences in searching for and appraising Internet-based information on medicines. Methods Six focus groups (N = 46 participants) were conducted in metropolitan Sydney, Australia from March to May 2003 with consumers who had used the Internet for information on medicines. Verbatim transcripts of the group discussions were analyzed using a grounded theory approach. Results All participants reported using a search engine to find information on medicines. Choice of search engine was determined by factors such as the workplace or educational environments, or suggestions by family or friends. Some participants found information solely by typing the medicine name (drug or brand name) into the search engine, while others searched using broader terms. Search skills ranged widely from more-advanced (using quotation marks and phrases) to less-than-optimal (such as typing in questions and full sentences). Many participants selected information from the first page of search results by looking for keywords and descriptions in the search results, and by looking for the source of the information as apparent in the URL. Opinions on credible sources of information on medicines varied with some participants regarding information by pharmaceutical companies as the "official" information on a medicine, and others preferring what they considered to be impartial sources such as governments, organizations, and educational institutions. It was clear that although most participants were skeptical of trusting information on the Internet, they had not paid conscious attention to how they selected information on medicines. Despite this, it was evident that participants viewed the Internet as an important source for information on medicines. Conclusions The results showed that there was a range of search and appraisal skills among participants, with many reporting a limited awareness of how they found and evaluated Internet-based information on medicines. Poor interpretation of written information on medicines has been shown to lead to anxiety and poor compliance to therapy. This issue is more important for Internet-based information since it is not subject to quality control and standardization as is written information on medicines. Therefore, there is a need for promoting consumer search and appraisal skills when using this information. Educating consumers in how to find and interpret Internet-based information on medicines may help them use their medicines in a safer and more-effective way. PMID:14713661

Selective Guide to Literature on Agricultural Engineering. Engineering Literature Guides, Number 4.

ERIC Educational Resources Information Center

Cloud, Gayla Staples, Comp.

Agricultural engineering overlaps many other disciplines. This document is a survey of information sources in agricultural engineering and is intended to identify those core resources which can help engineers and librarians to find information about the discipline. Sections include: (1) "Guides to the Literature"; (2) "Bibliographies"; (3)…

MetaSEEk: a content-based metasearch engine for images

NASA Astrophysics Data System (ADS)

Beigi, Mandis; Benitez, Ana B.; Chang, Shih-Fu

1997-12-01

Search engines are the most powerful resources for finding information on the rapidly expanding World Wide Web (WWW). Finding the desired search engines and learning how to use them, however, can be very time consuming. The integration of such search tools enables the users to access information across the world in a transparent and efficient manner. These systems are called meta-search engines. The recent emergence of visual information retrieval (VIR) search engines on the web is leading to the same efficiency problem. This paper describes and evaluates MetaSEEk, a content-based meta-search engine used for finding images on the Web based on their visual information. MetaSEEk is designed to intelligently select and interface with multiple on-line image search engines by ranking their performance for different classes of user queries. User feedback is also integrated in the ranking refinement. We compare MetaSEEk with a base line version of meta-search engine, which does not use the past performance of the different search engines in recommending target search engines for future queries.

Activities and Accomplishments of ICAM

NASA Technical Reports Server (NTRS)

Tiwari, S. N.

1997-01-01

A brief historical background on establishing the Institute for Computational and Applied Mechanics (ICAM) is presented and basic goals and objectives are discussed. It is emphasized that the goal of the ICAM has been to develop and maintain a self-sustaining center of excellence in computational methods at Old Dominion University (ODU). Information is provided on funding sources and budget disposition, recent activities and accomplishments, list of graduate students supported on the program, and number of students who received graduate degrees (M.S. as well as Ph.D.). Information is also provided on research coordination with various scientists and engineers, and on different reports specifically written for ICAM. ICAM has been supported, in part, by NASA Langley Research Center through Grant NAG-1-363. This report constitutes the final report for ICAM for the period ending December 1996. The grant has been monitored by the University Affairs Officers at NASA Langley.

Tank waste remediation system functions and requirements document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carpenter, K.E

1996-10-03

This is the Tank Waste Remediation System (TWRS) Functions and Requirements Document derived from the TWRS Technical Baseline. The document consists of several text sections that provide the purpose, scope, background information, and an explanation of how this document assists the application of Systems Engineering to the TWRS. The primary functions identified in the TWRS Functions and Requirements Document are identified in Figure 4.1 (Section 4.0) Currently, this document is part of the overall effort to develop the TWRS Functional Requirements Baseline, and contains the functions and requirements needed to properly define the top three TWRS function levels. TWRS Technicalmore » Baseline information (RDD-100 database) included in the appendices of the attached document contain the TWRS functions, requirements, and architecture necessary to define the TWRS Functional Requirements Baseline. Document organization and user directions are provided in the introductory text. This document will continue to be modified during the TWRS life-cycle.« less

77 FR 37283 - Airworthiness Directives; Turbomeca S.A. Turboshaft Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-21

... INFORMATION CONTACT: Rose Len, Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller...; email: rose[email protected] . SUPPLEMENTARY INFORMATION: Discussion We issued a notice of proposed... air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds...

ExaCT: automatic extraction of clinical trial characteristics from journal publications

PubMed Central

2010-01-01

Background Clinical trials are one of the most important sources of evidence for guiding evidence-based practice and the design of new trials. However, most of this information is available only in free text - e.g., in journal publications - which is labour intensive to process for systematic reviews, meta-analyses, and other evidence synthesis studies. This paper presents an automatic information extraction system, called ExaCT, that assists users with locating and extracting key trial characteristics (e.g., eligibility criteria, sample size, drug dosage, primary outcomes) from full-text journal articles reporting on randomized controlled trials (RCTs). Methods ExaCT consists of two parts: an information extraction (IE) engine that searches the article for text fragments that best describe the trial characteristics, and a web browser-based user interface that allows human reviewers to assess and modify the suggested selections. The IE engine uses a statistical text classifier to locate those sentences that have the highest probability of describing a trial characteristic. Then, the IE engine's second stage applies simple rules to these sentences to extract text fragments containing the target answer. The same approach is used for all 21 trial characteristics selected for this study. Results We evaluated ExaCT using 50 previously unseen articles describing RCTs. The text classifier (first stage) was able to recover 88% of relevant sentences among its top five candidates (top5 recall) with the topmost candidate being relevant in 80% of cases (top1 precision). Precision and recall of the extraction rules (second stage) were 93% and 91%, respectively. Together, the two stages of the extraction engine were able to provide (partially) correct solutions in 992 out of 1050 test tasks (94%), with a majority of these (696) representing fully correct and complete answers. Conclusions Our experiments confirmed the applicability and efficacy of ExaCT. Furthermore, they demonstrated that combining a statistical method with 'weak' extraction rules can identify a variety of study characteristics. The system is flexible and can be extended to handle other characteristics and document types (e.g., study protocols). PMID:20920176

Information Geography: A Bridge between Engineering and the Social Sciences

ERIC Educational Resources Information Center

Paradiso, Maria

2006-01-01

This paper presents the metaphor of engineering and the social sciences located on either side of a chasm and connected by the bridge of information geography. Information geography is not an integral part of engineering and is a new field within geography, a social science discipline. The specialty of information geography is one of the newest in…

The Human Side of Information's Converging Technology.

ERIC Educational Resources Information Center

Williams, Berney

1982-01-01

Discusses current issues in the design of information systems, noting contributions from three professions--computer science, human factors engineering, and information science. The eclectic nature of human factors engineering and the difficulty of drawing together studies with human engineering or software psychological components from diverse…

75 FR 65385 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-22

... Earthquake Engineering Simulation (NEES). SUMMARY: In compliance with the requirement of section 3506(c)(2)(A... of the Network for Earthquake Engineering Simulation. Type of Information Collection Request: New... inform decision making regarding the future of NSF support for earthquake engineering research...

Signature pathway expression of xylose utilization in the genetically engineered industrial yeast Saccharomyces cerevisiae

USDA-ARS?s Scientific Manuscript database

Background: The limited xylose utilizing ability of native Saccharomyces cerevisiae has been a major obstacle for efficient cellulosic ethanol production from lignocellulosic materials. Haploid laboratory strains of S. cerevisiae are commonly used for genetic engineering to enable its xylose utiliza...

The use of mathematical models in teaching wastewater treatment engineering.

PubMed

Morgenroth, E; Arvin, E; Vanrolleghem, P

2002-01-01

Mathematical modeling of wastewater treatment processes has become increasingly popular in recent years. To prepare students for their future careers, environmental engineering education should provide students with sufficient background and experiences to understand and apply mathematical models efficiently and responsibly. Approaches for introducing mathematical modeling into courses on wastewater treatment engineering are discussed depending on the learning objectives, level of the course and the time available.

KC-135 and Other Microgravity Simulations

NASA Technical Reports Server (NTRS)

Skinner, Noel C.

1999-01-01

This document represents a summary of medical and scientific evaluations conducted aboard the KC-135 from June 20, 1998 to June 20, 1999. Included is a general overview of KC-135 activities manifested and coordinated by the Life Sciences Research Laboratories. A collection of brief reports that describes tests conducted aboard the KC-135 follows the overview. Principal investigators and test engineers contributed significantly to the content of the report describing their particular experiment or hardware evaluation. Although this document follows general guidelines, each report format may vary to accommodate differences in experiment design and procedures. This document concludes with an appendix that provides background information concerning the KC-135 and the Reduced-Gravity Program.

C-9 and Other Microgravity Simulations

NASA Technical Reports Server (NTRS)

Hecht, Sharon (Editor); Reeves, Jacqueline M. (Editor); Spector, Elisabeth (Editor)

2009-01-01

This document represents a summary of medical and scientific evaluations conducted aboard the C-9 and other NASA-sponsored aircraft from June 2008 to June 2009. Included is a general overview of investigations manifested and coordinated by the Human Adaptation and Counter-measures Division. A collection of brief reports that describe tests conducted aboard the NASA-sponsored aircraft follows the overview. Principal investigators and test engineers contributed significantly to the content of the report, describing their particular experiment or hardware evaluation. Although this document follows general guidelines, each report format may vary to accommodate differences in experiment design and procedures. This document concludes with an appendix that provides background information concerning the Reduced Gravity Program. Acknowledgments

C-9 and Other Microgravity Simulations

NASA Technical Reports Server (NTRS)

Schlegel, Todd; Skinner, Noel

2007-01-01

This document represents a summary of medical and scientific evaluations conducted aboard the C-9 or other NASA-sponsored aircraft from June 30, 2006, to June 30, 2007. Included is a general overview of investigations manifested and coordinated by the Human Adaptation and Countermeasures Office. A collection of brief reports that describe tests conducted aboard the NASA-sponsored aircraft follows the overview. Principal investigators and test engineers contributed significantly to the content of the report, describing their particular experiment or hardware evaluation. Although this document follows general guidelines, each report format may vary to accommodate differences in experiment design and procedures. This document concludes with an appendix that provides background information about the Reduced Gravity Program.

KC-135 and Other Microgravity Simulations

NASA Technical Reports Server (NTRS)

Skinner, Noel C.; Schlegel, Todd T. (Technical Monitor)

2001-01-01

This document represents a summary of medical and scientific evaluations conducted aboard the KC-135 from January to June 15, 2001. Included is a general overview of KC-135 activities manifested and coordinated by the Human Adaptation and Countermeasures Office. A collection of brief reports that describes tests conducted aboard the KC-135 follows the overview. Principal investigators and test engineers contributed significantly to the content of the report describing their particular experiment or hardware evaluation. Although this document follows general guidelines, each report format may vary to accommodate differences in experiment design and procedures. This document concludes with an appendix that provides background information concerning the KC-135 and the Reduced-Gravity Program.

KSC-2009-4027

NASA Image and Video Library

2009-07-11

CAPE CANAVERAL, Fla. – At Astrotech Space Operations in Titusville, Fla., workers move a work stand into position to hold NASA's Solar Dynamics Observatory, or SDO, in the background. SDO is the first space weather research network mission in NASA's Living With a Star Program. The spacecraft's long-term measurements will give solar scientists in-depth information about changes in the sun's magnetic field and insight into how they affect Earth. In preparation for its anticipated November launch, engineers will perform a battery of comprehensive tests to ensure SDO can withstand the stresses and vibrations of the launch itself, as well as what it will encounter in the space environment after launch. Photo credit: NASA/Cory Huston

C-9 and Other Microgravity Simulations Summary Report

NASA Technical Reports Server (NTRS)

2010-01-01

This document represents a summary of medical and scientific evaluations conducted aboard the C-9 and other NASA-sponsored aircraft from June 2009 to June 2010. Included is a general overview of investigations manifested and coordinated by the Human Adaptation and Countermeasures Division. A collection of brief reports that describe tests conducted aboard the NASA-sponsored aircraft follows the overview. Principal investigators and test engineers contributed significantly to the content of the report, describing their particular experiment or hardware evaluation. Although this document follows general guidelines, each report format may vary to accommodate differences in experiment design and procedures. This document concludes with an appendix that provides background information concerning the Reduced Gravity Program.

Exploring Encoding and Retrieval Effects of Background Information on Text Memory

ERIC Educational Resources Information Center

Rawson, Katherine A.; Kintsch, Walter

2004-01-01

Two experiments were conducted (a) to evaluate how providing background information at test may benefit retrieval and (b) to further examine how providing background information prior to study influences encoding. Half of the participants read background information prior to study, and the other half did not. In each group, half were presented…

Searching for Cancer Information on the Internet: Analyzing Natural Language Search Queries

PubMed Central

Theofanos, Mary Frances

2003-01-01

Background Searching for health information is one of the most-common tasks performed by Internet users. Many users begin searching on popular search engines rather than on prominent health information sites. We know that many visitors to our (National Cancer Institute) Web site, cancer.gov, arrive via links in search engine result. Objective To learn more about the specific needs of our general-public users, we wanted to understand what lay users really wanted to know about cancer, how they phrased their questions, and how much detail they used. Methods The National Cancer Institute partnered with AskJeeves, Inc to develop a methodology to capture, sample, and analyze 3 months of cancer-related queries on the Ask.com Web site, a prominent United States consumer search engine, which receives over 35 million queries per week. Using a benchmark set of 500 terms and word roots supplied by the National Cancer Institute, AskJeeves identified a test sample of cancer queries for 1 week in August 2001. From these 500 terms only 37 appeared ≥ 5 times/day over the trial test week in 17208 queries. Using these 37 terms, 204165 instances of cancer queries were found in the Ask.com query logs for the actual test period of June-August 2001. Of these, 7500 individual user questions were randomly selected for detailed analysis and assigned to appropriate categories. The exact language of sample queries is presented. Results Considering multiples of the same questions, the sample of 7500 individual user queries represented 76077 queries (37% of the total 3-month pool). Overall 78.37% of sampled Cancer queries asked about 14 specific cancer types. Within each cancer type, queries were sorted into appropriate subcategories including at least the following: General Information, Symptoms, Diagnosis and Testing, Treatment, Statistics, Definition, and Cause/Risk/Link. The most-common specific cancer types mentioned in queries were Digestive/Gastrointestinal/Bowel (15.0%), Breast (11.7%), Skin (11.3%), and Genitourinary (10.5%). Additional subcategories of queries about specific cancer types varied, depending on user input. Queries that were not specific to a cancer type were also tracked and categorized. Conclusions Natural-language searching affords users the opportunity to fully express their information needs and can aid users naïve to the content and vocabulary. The specific queries analyzed for this study reflect news and research studies reported during the study dates and would surely change with different study dates. Analyzing queries from search engines represents one way of knowing what kinds of content to provide to users of a given Web site. Users ask questions using whole sentences and keywords, often misspelling words. Providing the option for natural-language searching does not obviate the need for good information architecture, usability engineering, and user testing in order to optimize user experience. PMID:14713659

Selective Guide to Literature on Mining Engineering. Engineering Literature Guides, Number 6.

ERIC Educational Resources Information Center

Erdmann, Charlotte A., Comp.

The multidisciplinary field of mining engineering offers many challenges. Often, many sources must be used to solve a problem. This document is a survey of information sources in mining engineering and is intended to identify those core resources which can help engineers and librarians to find information about the discipline. Sections include:…

Project-oriented teaching model about specialized courses in the information age

NASA Astrophysics Data System (ADS)

Chen, Xiaodong; Wang, Jinjiang; Tian, Qingguo; Wang, Yi; Cai, Huaiyu

2017-08-01

Specialized courses play a significant role in the usage of basic knowledge in the practical application for engineering college students. The engineering data available has sharply increased since the beginning of the information age in the 20th century, providing much more approaches to study and practice. Therefore, how to guide students to make full use of resources for active engineering practice learning has become one of the key problems for specialized courses. This paper took the digital image processing course for opto-electronic information science and technology major as an example, discussed the teaching model of specialized course in the information age, put forward the "engineering resource oriented model", and fostered the ability of engineering students to use the basic knowledge to innovate and deal with specific project objectives. The fusion of engineering examples into practical training and teaching encourages students to practice independent engineering thinking.

33 CFR 240.9 - Procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., sketches, and similar engineering data and information sufficient to permit analysis of the local proposal. (b) The District Engineer shall review the engineering adequacy of the local proposal and its... the Chief of Engineers to the Assistant Secretary of the Army (Civil Works) and provide information on...

33 CFR 240.9 - Procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., sketches, and similar engineering data and information sufficient to permit analysis of the local proposal. (b) The District Engineer shall review the engineering adequacy of the local proposal and its... the Chief of Engineers to the Assistant Secretary of the Army (Civil Works) and provide information on...

33 CFR 240.9 - Procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., sketches, and similar engineering data and information sufficient to permit analysis of the local proposal. (b) The District Engineer shall review the engineering adequacy of the local proposal and its... the Chief of Engineers to the Assistant Secretary of the Army (Civil Works) and provide information on...

33 CFR 240.9 - Procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., sketches, and similar engineering data and information sufficient to permit analysis of the local proposal. (b) The District Engineer shall review the engineering adequacy of the local proposal and its... the Chief of Engineers to the Assistant Secretary of the Army (Civil Works) and provide information on...

33 CFR 240.9 - Procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., sketches, and similar engineering data and information sufficient to permit analysis of the local proposal. (b) The District Engineer shall review the engineering adequacy of the local proposal and its... the Chief of Engineers to the Assistant Secretary of the Army (Civil Works) and provide information on...

78 FR 13286 - Sharing Certain Business Information Regarding the Introduction of Genetically Engineered...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-27

... Information Regarding the Introduction of Genetically Engineered Organisms With State and Tribal Government... proposing to amend our regulations regarding genetically engineered organisms regulated by the United States...). The regulations refer to such genetically engineered (GE) organisms and products as ``regulated...

Aircraft Engine-Monitoring System And Display

NASA Technical Reports Server (NTRS)

Abbott, Terence S.; Person, Lee H., Jr.

1992-01-01

Proposed Engine Health Monitoring System and Display (EHMSD) provides enhanced means for pilot to control and monitor performances of engines. Processes raw sensor data into information meaningful to pilot. Provides graphical information about performance capabilities, current performance, and operational conditions in components or subsystems of engines. Provides means to control engine thrust directly and innovative means to monitor performance of engine system rapidly and reliably. Features reduce pilot workload and increase operational safety.

Development and Certification of Ultrasonic Background Noise Test (UBNT) System for use on the International Space Station (ISS)

NASA Technical Reports Server (NTRS)

Prosser, William H.; Madaras, Eric I.

2011-01-01

As a next step in the development and implementation of an on-board leak detection and localization system on the International Space Station (ISS), there is a documented need to obtain measurements of the ultrasonic background noise levels that exist within the ISS. This need is documented in the ISS Integrated Risk Management System (IRMA), Watch Item #4669. To address this, scientists and engineers from the Langley Research Center (LaRC) and the Johnson Space Center (JSC), proposed to the NASA Engineering and Safety Center (NESC) and the ISS Vehicle Office a joint assessment to develop a flight package as a Station Development Test Objective (SDTO) that would perform ultrasonic background noise measurements within the United States (US) controlled ISS structure. This document contains the results of the assessment

Auditory perception of motor vehicle travel paths.

PubMed

Ashmead, Daniel H; Grantham, D Wesley; Maloff, Erin S; Hornsby, Benjamin; Nakamura, Takabun; Davis, Timothy J; Pampel, Faith; Rushing, Erin G

2012-06-01

These experiments address concerns that motor vehicles in electric engine mode are so quiet that they pose a risk to pedestrians, especially those with visual impairments. The "quiet car" issue has focused on hybrid and electric vehicles, although it also applies to internal combustion engine vehicles. Previous research has focused on detectability of vehicles, mostly in quiet settings. Instead, we focused on the functional ability to perceive vehicle motion paths. Participants judged whether simulated vehicles were traveling straight or turning, with emphasis on the impact of background traffic sound. In quiet, listeners made the straight-or-turn judgment soon enough in the vehicle's path to be useful for deciding whether to start crossing the street. This judgment is based largely on sound level cues rather than the spatial direction of the vehicle. With even moderate background traffic sound, the ability to tell straight from turn paths is severely compromised. The signal-to-noise ratio needed for the straight-or-turn judgment is much higher than that needed to detect a vehicle. Although a requirement for a minimum vehicle sound level might enhance detection of vehicles in quiet settings, it is unlikely that this requirement would contribute to pedestrian awareness of vehicle movements in typical traffic settings with many vehicles present. The findings are relevant to deliberations by government agencies and automobile manufacturers about standards for minimum automobile sounds and, more generally, for solutions to pedestrians' needs for information about traffic, especially for pedestrians with sensory impairments.

Transport and retention of surfactant- and polymer-stabilized engineered silver nanoparticles in silicate-dominated aquifer material

USDA-ARS?s Scientific Manuscript database

Packed column experiments were conducted to investigate the transport and blocking behavior of surfactant- and polymer-stabilized engineered silver nanoparticles (Ag-ENPs) in saturated natural aquifer material with varying silt and clay content, background solution chemistry, and flow velocity. Brea...

Anatomy for Biomedical Engineers

ERIC Educational Resources Information Center

Carmichael, Stephen W.; Robb, Richard A.

2008-01-01

There is a perceived need for anatomy instruction for graduate students enrolled in a biomedical engineering program. This appeared especially important for students interested in and using medical images. These students typically did not have a strong background in biology. The authors arranged for students to dissect regions of the body that…

Hadfield poses with MSL FLSS in the Node 2

NASA Image and Video Library

2012-12-23

ISS034-E-010603 (28 Dec. 2012) --- Canadian Space Agency astronaut Chris Hadfield, Expedition 34 flight engineer, poses with a Materials Science Laboratory (MSL) Furnace Launch Support Structure (FLSS) in the Destiny laboratory of the International Space Station. NASA astronaut Tom Marshburn, flight engineer, uses a computer in the background.

Computers in Electrical Engineering Education at Virginia Polytechnic Institute.

ERIC Educational Resources Information Center

Bennett, A. Wayne

1982-01-01

Discusses use of computers in Electrical Engineering (EE) at Virginia Polytechnic Institute. Topics include: departmental background, level of computing power using large scale systems, mini and microcomputers, use of digital logic trainers and analog/hybrid computers, comments on integrating computers into EE curricula, and computer use in…

Undergraduate Astronautics at the United States Naval Academy.

ERIC Educational Resources Information Center

Bagaria, William J.

1991-01-01

The aerospace engineering curriculum at the U.S. Naval Academy which includes an astronautical and an aeronautical track is described. The objective of the program is to give students the necessary astronautical engineering background to perform a preliminary spacecraft design during the last semester of the program. (KR)

Study Programmes for Engineers from Developing Countries at the Norwegian Institute of Technology.

ERIC Educational Resources Information Center

Lasson, Axel; Hermansen, John

1989-01-01

Describes the background of the study and fellowship programs for graduates from the developing countries at the Norwegian Institute of Technology. Discusses some experiences with the programs. Includes a brief description of five courses: (1) "Pulp and Paper Technology"; (2) "Marine Civil Engineering"; (3) "Hydropower…

Scientists, Engineers, and Physicians From Abroad, Trends Through Fiscal Year 1970.

ERIC Educational Resources Information Center

Gannon, Joseph; Stewart, Christine C.

A report on the influx of scientists, engineers, and physicians from abroad is presented to assess recent trends in terms of numbers, occupations, and national backgrounds. Both immigrant and nonimmigrant components are included. Descriptions are made in connection with migration patterns, aliens adjusted to immigrant status, demographic…

The Civil Engineering Graduate Program at PUC-Rio: A Brazilian Experience.

ERIC Educational Resources Information Center

Romanel, Celso; Filho, Jose Napoleao

This document discusses the graduate programs in civil engineering at the Pontifical Catholic University of Rio de Janeiro, Brazil, the oldest Brazilian private university. The report features discussions of faculty member backgrounds, trends in student enrollment, women's participation in the program, degree completion, student origins,…

Engineering industrial Saccharomyces cerevisiae strains for xylose fermentation and comparison for switchgrass conversion

USDA-ARS?s Scientific Manuscript database

Saccharomyces physiology and fermentation related properties vary broadly among industrial strains. In this study, six industrial strains of varied genetic background were engineered to ferment xylose. Aerobic growth rates on xylose were 0.040 h**-1 to 0.167 h**-1. Fermentation of xylose, glucose/xy...

Interactive Information Organization: Techniques and Evaluation

DTIC Science & Technology

2001-05-01

information search and access. Locating interesting information on the World Wide Web is the main task of on-line search engines . Such engines accept a...likelihood of being relevant to the user’s request. The majority of today’s Web search engines follow this scenario. The ordering of documents in the

78 FR 64255 - Advisory Committee for Computer and Information Science and Engineering; Cancellation of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-28

... NATIONAL SCIENCE FOUNDATION Advisory Committee for Computer and Information Science and Engineering; Cancellation of Meeting SUMMARY: As a result of the impact of the recent government shutdown, the... Committee for Computer and Information Science and Engineering meeting. The public notice for this committee...

Space Transportation System Western Launch Site Construction Management Information System - A Case Study.

DTIC Science & Technology

1979-09-01

The Corps of Engineers Management Information System (COEMIS) is used by the Corps of Engineers in their role as Construction Agents on Air Force...California. The research concluded that the Corps of Engineers Management Information System can be an effective, efficient management tool which has the

Intercultural Communication in Management of Engineering and Technology

NASA Astrophysics Data System (ADS)

Miyoshi, Kazuhisa

Companies want more business-minded industrial technology managers and engineers with entrepreneurial skills who also have an awareness of the challenges of global marketplace. Both the Master of Engineering and Management Degree (MEM) and the Master of Management of Technology Degree (MOT) aim to meet the needs of industry by offering managers and engineers the critical skills need to be successful in a professional career. The world today is characterized by an ever-growing number of contacts resulting in communication between people in industry with different linguistic and cultural backgrounds. This communication takes place because of contacts within the areas of business, engineering, technology, science, and education but also because of immigration brought about by labor shortage or political conflicts. In all these contacts, there is communication, which needs to be as constructive as possible, without misunderstandings and breakdowns. Knowledge on the nature of linguistic and cultural similarities and differences can play a positive and constructive role. The objective of this paper is to examine what makes the difference in communication between people with diverse cultural background. In addition, it emphasizes the importance of diversity management and diversity leadership in the diverse workplace.

Heat engine driven by purely quantum information.

PubMed

Park, Jung Jun; Kim, Kang-Hwan; Sagawa, Takahiro; Kim, Sang Wook

2013-12-06

The key question of this Letter is whether work can be extracted from a heat engine by using purely quantum mechanical information. If the answer is yes, what is its mathematical formula? First, by using a bipartite memory we show that the work extractable from a heat engine is bounded not only by the free energy change and the sum of the entropy change of an individual memory but also by the change of quantum mutual information contained inside the memory. We then find that the engine can be driven by purely quantum information, expressed as the so-called quantum discord, forming a part of the quantum mutual information. To confirm it, as a physical example we present the Szilard engine containing a diatomic molecule with a semipermeable wall.

40 CFR 86.1605 - Information to be submitted.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES (CONTINUED) Regulations for Altitude Performance Adjustments for New and In-Use Motor Vehicles and Engines § 86.1605 Information to be..., car line, model year, engine displacement, engine family, and exhaust emission control systems...

40 CFR 86.1605 - Information to be submitted.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES (CONTINUED) Regulations for Altitude Performance Adjustments for New and In-Use Motor Vehicles and Engines § 86.1605 Information to be..., car line, model year, engine displacement, engine family, and exhaust emission control systems...

40 CFR 86.1605 - Information to be submitted.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES (CONTINUED) Regulations for Altitude Performance Adjustments for New and In-Use Motor Vehicles and Engines § 86.1605 Information to be..., car line, model year, engine displacement, engine family, and exhaust emission control systems...

40 CFR 86.1605 - Information to be submitted.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES Regulations for Altitude Performance Adjustments for New and In-Use Motor Vehicles and Engines § 86.1605 Information to be submitted... line, model year, engine displacement, engine family, and exhaust emission control systems...

40 CFR 86.1605 - Information to be submitted.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES (CONTINUED) Regulations for Altitude Performance Adjustments for New and In-Use Motor Vehicles and Engines § 86.1605 Information to be..., car line, model year, engine displacement, engine family, and exhaust emission control systems...

Developing a search engine for pharmacotherapeutic information that is not published in biomedical journals.

PubMed

Do Pazo-Oubiña, F; Calvo Pita, C; Puigventós Latorre, F; Periañez-Párraga, L; Ventayol Bosch, P

2011-01-01

To identify publishers of pharmacotherapeutic information not found in biomedical journals that focuses on evaluating and providing advice on medicines and to develop a search engine to access this information. Compiling web sites that publish information on the rational use of medicines and have no commercial interests. Free-access web sites in Spanish, Galician, Catalan or English. Designing a search engine using the Google "custom search" application. Overall 159 internet addresses were compiled and were classified into 9 labels. We were able to recover the information from the selected sources using a search engine, which is called "AlquimiA" and available from http://www.elcomprimido.com/FARHSD/AlquimiA.htm. The main sources of pharmacotherapeutic information not published in biomedical journals were identified. The search engine is a useful tool for searching and accessing "grey literature" on the internet. Copyright © 2010 SEFH. Published by Elsevier Espana. All rights reserved.

Multispectral imaging of aircraft exhaust

NASA Astrophysics Data System (ADS)

Berkson, Emily E.; Messinger, David W.

2016-05-01

Aircraft pollutants emitted during the landing-takeoff (LTO) cycle have significant effects on the local air quality surrounding airports. There are currently no inexpensive, portable, and unobtrusive sensors to quantify the amount of pollutants emitted from aircraft engines throughout the LTO cycle or to monitor the spatial-temporal extent of the exhaust plume. We seek to thoroughly characterize the unburned hydrocarbon (UHC) emissions from jet engine plumes and to design a portable imaging system to remotely quantify the emitted UHCs and temporally track the distribution of the plume. This paper shows results from the radiometric modeling of a jet engine exhaust plume and describes a prototype long-wave infrared imaging system capable of meeting the above requirements. The plume was modeled with vegetation and sky backgrounds, and filters were selected to maximize the detectivity of the plume. Initial calculations yield a look-up chart, which relates the minimum amount of emitted UHCs required to detect the presence of a plume to the noise-equivalent radiance of a system. Future work will aim to deploy the prototype imaging system at the Greater Rochester International Airport to assess the applicability of the system on a national scale. This project will help monitor the local pollution surrounding airports and allow better-informed decision-making regarding emission caps and pollution bylaws.

Low-thrust chemical rocket engine study

NASA Technical Reports Server (NTRS)

Mellish, J. A.

1981-01-01

Engine data and information are presented to perform system studies on cargo orbit-transfer vehicles which would deliver large space structures to geosynchronous equatorial orbit. Low-thrust engine performance, weight, and envelope parametric data were established, preliminary design information was generated, and technologies for liquid rocket engines were identified. Two major engine design drivers were considered in the study: cooling and engine cycle options. Both film-cooled and regeneratively cooled engines were evaluated. The propellant combinations studied were hydrogen/oxygen, methane/oxygen, and kerosene/oxygen.

MIRASS: medical informatics research activity support system using information mashup network.

PubMed

Kiah, M L M; Zaidan, B B; Zaidan, A A; Nabi, Mohamed; Ibraheem, Rabiu

2014-04-01

The advancement of information technology has facilitated the automation and feasibility of online information sharing. The second generation of the World Wide Web (Web 2.0) enables the collaboration and sharing of online information through Web-serving applications. Data mashup, which is considered a Web 2.0 platform, plays an important role in information and communication technology applications. However, few ideas have been transformed into education and research domains, particularly in medical informatics. The creation of a friendly environment for medical informatics research requires the removal of certain obstacles in terms of search time, resource credibility, and search result accuracy. This paper considers three glitches that researchers encounter in medical informatics research; these glitches include the quality of papers obtained from scientific search engines (particularly, Web of Science and Science Direct), the quality of articles from the indices of these search engines, and the customizability and flexibility of these search engines. A customizable search engine for trusted resources of medical informatics was developed and implemented through data mashup. Results show that the proposed search engine improves the usability of scientific search engines for medical informatics. Pipe search engine was found to be more efficient than other engines.

46. (Credit LSU) High service pumping room, c1904. The # ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

46. (Credit LSU) High service pumping room, c1904. The # 1 Worthington horizontal, triple expansion, high service engine is in the background. The pump whose steam end is in the foreground is a Blake compound, duplex horizontal engine, installed c1904. The engine in the center of the illustration is one of the original 1887 Blake high service engines (compound, duplex). It was shortly after removed. (From: Shreveport Progressive League, Shreveport of To-Day, September 1904, p. 47) - McNeil Street Pumping Station, McNeil Street & Cross Bayou, Shreveport, Caddo Parish, LA

A Clinical Decision Support Engine Based on a National Medication Repository for the Detection of Potential Duplicate Medications: Design and Evaluation

PubMed Central

Yang, Cheng-Yi; Lo, Yu-Sheng; Chen, Ray-Jade

2018-01-01

Background A computerized physician order entry (CPOE) system combined with a clinical decision support system can reduce duplication of medications and thus adverse drug reactions. However, without infrastructure that supports patients’ integrated medication history across health care facilities nationwide, duplication of medication can still occur. In Taiwan, the National Health Insurance Administration has implemented a national medication repository and Web-based query system known as the PharmaCloud, which allows physicians to access their patients’ medication records prescribed by different health care facilities across Taiwan. Objective This study aimed to develop a scalable, flexible, and thematic design-based clinical decision support (CDS) engine, which integrates a national medication repository to support CPOE systems in the detection of potential duplication of medication across health care facilities, as well as to analyze its impact on clinical encounters. Methods A CDS engine was developed that can download patients’ up-to-date medication history from the PharmaCloud and support a CPOE system in the detection of potential duplicate medications. When prescribing a medication order using the CPOE system, a physician receives an alert if there is a potential duplicate medication. To investigate the impact of the CDS engine on clinical encounters in outpatient services, a clinical encounter log was created to collect information about time, prescribed drugs, and physicians’ responses to handling the alerts for each encounter. Results The CDS engine was installed in a teaching affiliate hospital, and the clinical encounter log collected information for 3 months, during which a total of 178,300 prescriptions were prescribed in the outpatient departments. In all, 43,844/178,300 (24.59%) patients signed the PharmaCloud consent form allowing their physicians to access their medication history in the PharmaCloud. The rate of duplicate medication was 5.83% (1843/31,614) of prescriptions. When prescribing using the CDS engine, the median encounter time was 4.3 (IQR 2.3-7.3) min, longer than that without using the CDS engine (median 3.6, IQR 2.0-6.3 min). From the physicians’ responses, we found that 42.06% (1908/4536) of the potential duplicate medications were recognized by the physicians and the medication orders were canceled. Conclusions The CDS engine could easily extend functions for detection of adverse drug reactions when more and more electronic health record systems are adopted. Moreover, the CDS engine can retrieve more updated and completed medication histories in the PharmaCloud, so it can have better performance for detection of duplicate medications. Although our CDS engine approach could enhance medication safety, it would make for a longer encounter time. This problem can be mitigated by careful evaluation of adopted solutions for implementation of the CDS engine. The successful key component of a CDS engine is the completeness of the patient’s medication history, thus further research to assess the factors in increasing the PharmaCloud consent rate is required. PMID:29351893

The Effects of Thermal Barrier Coating, Common-Rail Injection, and Reduced Compression Ratio on the Efficiency of Single-Cylinder Diesel Engines

DTIC Science & Technology

2010-05-12

m) YXX:........................................Molar Fraction of Compound XX 12 1 Introduction and Background Small internal combustion...Heywood, John B. Internal Combustion Engine Fundamentals. New York: McGraw-Hill, 1988. [9] Judge, A.W. High Speed Diesel Engines. London...performance and exergy potential of the exhaust gas. Energy Conversion and Management 46:489-499. [11] Parlak A., Yasar H., and Sahin B. 2003. Performance

Multi-fuel rotary engine for general aviation aircraft

NASA Technical Reports Server (NTRS)

Jones, C.; Ellis, D. R.; Meng, P. R.

1983-01-01

Design studies of advanced multifuel general aviation and commuter aircraft rotary stratified charge engines are summarized. Conceptual design studies were performed at two levels of technology, on advanced general aviation engines sized to provide 186/250 shaft kW/hp under cruise conditions at 7620 (25000 m/ft) altitude. A follow on study extended the results to larger (2500 hp max.) engine sizes suitable for applications such as commuter transports and helicopters. The study engine designs were derived from relevant engine development background including both prior and recent engine test results using direct injected unthrottled rotary engine technology. Aircraft studies, using these resultant growth engines, define anticipated system effects of the performance and power density improvements for both single engine and twin engine airplanes. The calculated results indicate superior system performance and 27 to 33 percent fuel economy improvement for the rotary engine airplanes as compared to equivalent airframe concept designs with current baseline engines. The research and technology activities required to attain the projected engine performance levels are also discussed.

76 FR 55389 - Federal Acquisition Regulation; Submission for OMB Review; Architect-Engineer Qualifications (SF...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-07

...; Submission for OMB Review; Architect-Engineer Qualifications (SF 330) AGENCIES: Department of Defense (DOD... extension of a previously approved information collection requirement for the Architect-Engineer... 330, Part I is used by all Executive agencies to obtain information from architect-engineer firms...

Pre-Engineering Program. Introduction to Engineering. Advanced Engineering.

ERIC Educational Resources Information Center

Henrico County Public Schools, Glen Allen, VA. Virginia Vocational Curriculum and Resource Center.

This guide contains information and hands-on activities to guide students through the problem-solving process needed in engineering (problem solving, presentation, and impact analysis) and information to help the instructor manage the program or courses in Virginia. Following an introduction, the guide contains a program description that supplies…

The Effect of “Countrywide Services Management Law” on the Work Motivation of the Employees of Iranian Ministry of Health

PubMed Central

Shafeghat, Hossein; Jafari, Mehdi; Monavarian, Abbas; Shafayi, Maryam; Dehnavieh, Reza

2014-01-01

Background: Labor laws and regulations have inevitable effects on employees’ work motivation as well as the overall efficiency and productivity of the organization. Objectives: This study was conducted to assess the effects of the “Countrywide Services Management Law” on the work motivation level of the employees of the Iranian Ministry of Health. Patients and Methods: This cross-sectional study was done in 2011 in the Iran's Ministry of Health. Data was collected by a 51-item Likert scale questionnaire, in five domains including: organizational structure, information technology, training patterns, salary and bonus system and re-engineering process. The reliability and validity of the questionnaire was evaluated (Cronbach's alpha= 0.96). Data analysis was conducted using descriptive and inferential statistics (t-test). Results: Out of 192 samples examined, 55.2% of the respondents were female, 88 (45.8%) had BS degree and 116 (60.4%) had less than 10 years’ experience. The mean scores in the domains of organizational structure, information technology, training patterns, salary and bonus system and re-engineering patterns were: 3.11, 3.51, 3.05, 3.21 and 3.14, respectively. Relationship between the items related to manpower in the “Countrywide Services Management Law”, with employees' work motivation was significant (P < 0.0001). The training patterns did not show a significant relation (P < 0.26) with any of five domains. Conclusions: According to our results and the views of the employees of the Iranian Ministry of Health, “Countrywide Services Management Law” positively affected the personnel's work motivation regarding all the factors associated with motivation including: organizational structure, information technology, training patterns, salary and bonus system and re-engineering pattern. Finally, to enhance the workforce motivation and satisfaction level, application and implementation of the rules and regulations should be based on the organizational needs. PMID:24719736

What to Buy? The Role of Director of Defense Research and Engineering (DDR&E) Lessons from the 1970s

DTIC Science & Technology

2011-01-01

experience . ix Contents 1. Background , Methodology, and Approach .................................................................1 2. Origins and...65 5 . The Case of the 2000–3000 Ton Surface Effect Ship (SES) Prototype Program...97 1. Strategic Background : The Antisubmarine Warfare Experience ................97 2. The Problem

IDEF3 Formalization Report

DTIC Science & Technology

1991-10-01

SUBJECT TERMS 15. NUMBER OF PAGES engineering management information systems method formalization 60 information engineering process modeling 16 PRICE...CODE information systems requirements definition methods knowlede acquisition methods systems engineering 17. SECURITY CLASSIFICATION ji. SECURITY... Management , Inc., Santa Monica, California. CORYNEN, G. C., 1975, A Mathematical Theory of Modeling and Simula- tion. Ph.D. Dissertation, Department

78 FR 61870 - Advisory Committee for Computer and Information Science and Engineering; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-04

... NATIONAL SCIENCE FOUNDATION Advisory Committee for Computer and Information Science and Engineering; Notice of Meeting In accordance with Federal Advisory Committee Act (Pub. L. 92-463, as amended... Committee for Computer and Information Science and Engineering (1115). Date/Time: Oct 31, 2013: 12:30 p.m...

78 FR 79014 - Advisory Committee for Computer and Information Science and Engineering Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-27

... NATIONAL SCIENCE FOUNDATION Advisory Committee for Computer and Information Science and Engineering Notice of Meeting In accordance with Federal Advisory Committee Act (Pub. L. 92-463, as amended... and Information Science and Engineering (1115) DATE/TIME: January 14, 2014, 3:00 p.m. to 5:00 p.m...

How has the flu virus infected the Web? 2010 influenza and vaccine information available on the Internet

PubMed Central

2013-01-01

Background The 2009–10 influenza pandemic was a major public health concern. Vaccination was recommended by the health authorities, but compliance was not optimal and perception of the presumed associated risks was high among the public. The Internet is increasingly being used as a source of health information and advice. The aim of the study was to investigate the characteristics of websites providing information about flu vaccine and the quality of the information provided. Methods Website selection was performed in autumn 2010 by entering eight keywords in two of the most commonly used search engines (Google.com and Yahoo.com). The first three result pages were analysed for each search, giving a total of 480 occurrences. Page rank was evaluated to assess visibility. Websites based on Web 2.0 philosophy, websites merely displaying popular news/articles and single files were excluded from the subsequent analysis. We analysed the selected websites (using WHO criteria) as well as the information provided, using a codebook for pro/neutral websites and a qualitative approach for the adverse ones. Results Of the 89 websites selected, 54 dealt with seasonal vaccination, three with anti-H1N1 vaccination and 32 with both. Rank analysis showed that only classic websites (ones not falling in any other category) and one social network were provided on the first pages by Yahoo; 21 classic websites, six displaying popular news/articles and one blog by Google. Analysis of the selected websites revealed that the majority of them (88.8%) had a positive/neutral attitude to flu vaccination. Pro/neutral websites distinguished themselves from the adverse ones by some revealing features like greater transparency, credibility and privacy protection. Conclusions We found that the majority of the websites providing information on flu vaccination were pro/neutral and gave sufficient information. We suggest that antivaccinationist information may have been spread by a different route, such as via Web 2.0 tools, which may be more prone to the dissemination of “viral” information. The page ranking analysis revealed the crucial role of search engines regarding access to information on the Internet. PMID:23360311

77 FR 14955 - DoD Information Assurance Scholarship Program (IASP)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-14

... IA and information technology (IT) management, technical, digital and multimedia forensics, cyber..., digital and multimedia forensics, electrical engineering, electronics engineering, information security...

Guiding Principles for a Pediatric Neurology ICU (neuroPICU) Bedside Multimodal Monitor

PubMed Central

Eldar, Yonina C.; Gopher, Daniel; Gottlieb, Amihai; Lammfromm, Rotem; Mangat, Halinder S; Peleg, Nimrod; Pon, Steven; Rozenberg, Igal; Schiff, Nicholas D; Stark, David E; Yan, Peter; Pratt, Hillel; Kosofsky, Barry E

2016-01-01

Summary Background Physicians caring for children with serious acute neurologic disease must process overwhelming amounts of physiological and medical information. Strategies to optimize real time display of this information are understudied. Objectives Our goal was to engage clinical and engineering experts to develop guiding principles for creating a pediatric neurology intensive care unit (neuroPICU) monitor that integrates and displays data from multiple sources in an intuitive and informative manner. Methods To accomplish this goal, an international group of physicians and engineers communicated regularly for one year. We integrated findings from clinical observations, interviews, a survey, signal processing, and visualization exercises to develop a concept for a neuroPICU display. Results Key conclusions from our efforts include: (1) A neuroPICU display should support (a) rapid review of retrospective time series (i.e. cardiac, pulmonary, and neurologic physiology data), (b) rapidly modifiable formats for viewing that data according to the specialty of the reviewer, and (c) communication of the degree of risk of clinical decline. (2) Specialized visualizations of physiologic parameters can highlight abnormalities in multivariable temporal data. Examples include 3-D stacked spider plots and color coded time series plots. (3) Visual summaries of EEG with spectral tools (i.e. hemispheric asymmetry and median power) can highlight seizures via patient-specific “fingerprints.” (4) Intuitive displays should emphasize subsets of physiology and processed EEG data to provide a rapid gestalt of the current status and medical stability of a patient. Conclusions A well-designed neuroPICU display must present multiple datasets in dynamic, flexible, and informative views to accommodate clinicians from multiple disciplines in a variety of clinical scenarios. PMID:27437048

From design to implementation - The Joint Asia Diabetes Evaluation (JADE) program: A descriptive report of an electronic web-based diabetes management program

PubMed Central

2010-01-01

Background The Joint Asia Diabetes Evaluation (JADE) Program is a web-based program incorporating a comprehensive risk engine, care protocols, and clinical decision support to improve ambulatory diabetes care. Methods The JADE Program uses information technology to facilitate healthcare professionals to create a diabetes registry and to deliver an evidence-based care and education protocol tailored to patients' risk profiles. With written informed consent from participating patients and care providers, all data are anonymized and stored in a databank to establish an Asian Diabetes Database for research and publication purpose. Results The JADE electronic portal (e-portal: http://www.jade-adf.org) is implemented as a Java application using the Apache web server, the mySQL database and the Cocoon framework. The JADE e-portal comprises a risk engine which predicts 5-year probability of major clinical events based on parameters collected during an annual comprehensive assessment. Based on this risk stratification, the JADE e-portal recommends a care protocol tailored to these risk levels with decision support triggered by various risk factors. Apart from establishing a registry for quality assurance and data tracking, the JADE e-portal also displays trends of risk factor control at each visit to promote doctor-patient dialogues and to empower both parties to make informed decisions. Conclusions The JADE Program is a prototype using information technology to facilitate implementation of a comprehensive care model, as recommended by the International Diabetes Federation. It also enables health care teams to record, manage, track and analyze the clinical course and outcomes of people with diabetes. PMID:20465815

An astronomy camera for low background applications in the 1. 0 to 2. 5. mu. m spectral region

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kaki, S.A.; Bailey, G.C.; Hagood, R.W.

1989-02-01

A short wavelength (1.0-2.5 ..mu..m) 128 x 128 focal plane array forms the heart of this low background astronomy camera system. The camera is designed to accept either a 128 x 128 HgCdTe array for the 1-2.5 ..mu..m spectral region or an InSb array for the 3-5 ..mu..m spectral region. A cryogenic folded optical system is utilized to control excess stray light along with a cold eight-position filter wheel for spectral filtering. The camera head and electronics will also accept a 256 x 256 focal plane. Engineering evaluation of the complete system is complete along with two engineering runs atmore » the JPL Table Mountain Observatory. System design, engineering performance, and sample imagery are presented in this paper.« less

Engineering Escherichia coli K12 MG1655 to use starch

PubMed Central

2014-01-01

Background To attain a sustainable bioeconomy, fuel, or valuable product, production must use biomass as substrate. Starch is one of the most abundant biomass resources and is present as waste or as a food and agroindustry by-product. Unfortunately, Escherichia coli, one of the most widely used microorganisms in biotechnological processes, cannot use starch as a carbon source. Results We engineered an E. coli strain capable of using starch as a substrate. The genetic design employed the native capability of the bacterium to use maltodextrins as a carbon source plus expression and secretion of its endogenous α-amylase, AmyA, in an adapted background. Biomass production improved using 35% dissolved oxygen and pH 7.2 in a controlled bioreactor. Conclusion The engineered E. coli strain can use starch from the milieu and open the possibility of optimize the process to use agroindustrial wastes to produce biofuels and other valuable chemicals. PMID:24886307

Application of Background Oriented Schlieren for Altitude Testing of Rocket Engines

NASA Technical Reports Server (NTRS)

Wernet, Mark P.; Stiegemeier, Benjamin R.

2017-01-01

A series of experiments was performed to determine the feasibility of using the Background Oriented Schlieren, BOS, flow visualization technique to image a simulated, small, rocket engine, plume under altitude test conditions. Testing was performed at the NASA Glenn Research Centers Altitude Combustion Stand, ACS, using nitrogen as the exhaust gas simulant. Due to limited optical access to the facility test capsule, all of the hardware required to conduct the BOS were located inside the vacuum chamber. During the test series 26 runs were performed using two different nozzle configurations with pressures in the test capsule around 0.3 psia. No problems were encountered during the test series resulting from the optical hardware being located in the test capsule and acceptable resolution images were captured. The test campaign demonstrated the ability of using the BOS technique for small, rocket engine, plume flow visualization during altitude testing.

Gauging Workplace Readiness: Assessing the Information Needs of Engineering Co-op Students

ERIC Educational Resources Information Center

Jeffryes, Jon; Lafferty, Meghan

2012-01-01

Librarians at the Science and Engineering Library at the University of Minnesota surveyed engineering students participating in a work placement as part of the cooperative education program. The survey asked about students' on-the-job information usage, comfort level accessing different types of engineering literature, and experience learning to…

Patent Information Use in Engineering Technology Design: An Analysis of Student Work

ERIC Educational Resources Information Center

Phillips, Margaret; Zwicky, Dave

2017-01-01

How might engineering technology students make use of patent information in the engineering design process? Librarians analyzed team project reports and personal reflections created by students in an undergraduate mechanical engineering technology design course, revealing that the students used patents to consider the patentability of their ideas,…

An Exploratory Investigation of Teaching Innovations and Learning Factors in a Lean Manufacturing Systems Engineering Course

ERIC Educational Resources Information Center

Choomlucksana, Juthamas; Doolen, Toni L.

2017-01-01

The use of collaborative activities and simulation sessions in engineering education has been explored previously. However, few studies have investigated the relationship of these types of teaching innovations with other learner characteristics, such as self-efficacy and background knowledge. This study explored the effects of collaborative…

Treatment of colitis with a commensal gut bacterium engineered to secrete human TGF-beta1 under the control of dietary xylan

USDA-ARS?s Scientific Manuscript database

Background: Growth factors have shown promise in treating inflammatory bowel disease. They are unstable when administered orally and required in higher doses with systemic administration. In consideration of these problems, we have engineered the commensal bacterium Bacteroides ovatus for the con...

Science and Engineering Doctorate Production among Minorities with Non-Traditional Backgrounds.

ERIC Educational Resources Information Center

Brazziel, William F.; Brazziel, Marian E.

This study examined the extent to which minority individuals with baccalaureate origins as non-traditional students (baccalaureates completed at age 25 or over) completed doctoral degrees in science and engineering. It compared the efficacy of their degree completion, i.e., elapsed time and registered time to degree, with that of counterparts with…

An Investigation into the Understanding and Skills of First-Year Electrical Engineering Students

ERIC Educational Resources Information Center

Smaill, C. R.; Rowe, G. B.; Godfrey, E.; Paton, R. O.

2012-01-01

In response to demands from industry and the profession for more graduates, first-year engineering numbers have grown considerably over the last decade, matched by an increasing diversity of academic backgrounds. In order to support first-year students effectively, and ensure the courses they take remain appropriately pitched, the academic…

Voss with soldering tool in Service Module

NASA Image and Video Library

2001-03-28

ISS002-E-5068 (28 March 2001) --- Astronaut James S. Voss, Expedition Two flight engineer, prepares to use a soldering tool for a maintenance task in the Zvezda Service Module onboard the International Space Station (ISS). Astronaut Susan J. Helms, flight engineer, is in the background. The image was recorded with a digital still camera.

A New Approach to Improving Science, Technology, Engineering, and Math Education. Backgrounder No. 2259

ERIC Educational Resources Information Center

Lips, Dan; McNeill, Jena Baker

2009-01-01

The authors express reservations about additional federal funding for the National Science Foundation, including new funding for science, technology, engineering, and math (STEM) education programs, provided by the American Recovery and Reinvestment Act of 2009. For more than 50 years, American political, business, military, and academic leaders…

Student Learning Outcomes from a Pilot Medical Innovations Course with Nursing, Engineering, and Biology Undergraduate Students

ERIC Educational Resources Information Center

Ludwig, Patrice M.; Nagel, Jacquelyn K.; Lewis, Erica J.

2017-01-01

Background: Preparing today's undergraduate students from science, technology, engineering, and math (STEM) and related health professions to solve wide-sweeping healthcare challenges is critical. Moreover, it is imperative that educators help students develop the capabilities needed to meet those challenges, including problem solving,…

Multi-topic assignment for exploratory navigation of consumer health information in NetWellness using formal concept analysis

PubMed Central

2014-01-01

Background Finding quality consumer health information online can effectively bring important public health benefits to the general population. It can empower people with timely and current knowledge for managing their health and promoting wellbeing. Despite a popular belief that search engines such as Google can solve all information access problems, recent studies show that using search engines and simple search terms is not sufficient. Our objective is to provide an approach to organizing consumer health information for navigational exploration, complementing keyword-based direct search. Multi-topic assignment to health information, such as online questions, is a fundamental step for navigational exploration. Methods We introduce a new multi-topic assignment method combining semantic annotation using UMLS concepts (CUIs) and Formal Concept Analysis (FCA). Each question was tagged with CUIs identified by MetaMap. The CUIs were filtered with term-frequency and a new term-strength index to construct a CUI-question context. The CUI-question context and a topic-subject context were used for multi-topic assignment, resulting in a topic-question context. The topic-question context was then directly used for constructing a prototype navigational exploration interface. Results Experimental evaluation was performed on the task of automatic multi-topic assignment of 99 predefined topics for about 60,000 consumer health questions from NetWellness. Using example-based metrics, suitable for multi-topic assignment problems, our method achieved a precision of 0.849, recall of 0.774, and F1 measure of 0.782, using a reference standard of 278 questions with manually assigned topics. Compared to NetWellness’ original topic assignment, a 36.5% increase in recall is achieved with virtually no sacrifice in precision. Conclusion Enhancing the recall of multi-topic assignment without sacrificing precision is a prerequisite for achieving the benefits of navigational exploration. Our new multi-topic assignment method, combining term-strength, FCA, and information retrieval techniques, significantly improved recall and performed well according to example-based metrics. PMID:25086916

Engaging Engineering and Information Systems Students in Advocacy for Individuals with Disabilities through a Disability Film Media Project

ERIC Educational Resources Information Center

Lawler, James; Iturralde, Val; Goldstein, Allan; Joseph, Anthony

2015-01-01

College curricula of engineering and information systems do not afford frequent engagement with individuals with disabilities. The authors of this research study analyzed the benefits of disability films for a community film festival of largely engineering and information systems students and individuals with developmental and intellectual…

Engineering Design Thinking and Information Gathering. Final Report. Research in Engineering and Technology Education

ERIC Educational Resources Information Center

Mentzer, Nathan

2011-01-01

The objective of this research was to explore the relationship between information access and design solution quality of high school students presented with an engineering design problem. This objective is encompassed in the research question driving this inquiry: How does information access impact the design process? This question has emerged in…

Distinguishing nanomaterial particles from background airborne particulate matter for quantitative exposure assessment

NASA Astrophysics Data System (ADS)

Ono-Ogasawara, Mariko; Serita, Fumio; Takaya, Mitsutoshi

2009-10-01

As the production of engineered nanomaterials quantitatively expands, the chance that workers involved in the manufacturing process will be exposed to nanoparticles also increases. A risk management system is needed for workplaces in the nanomaterial industry based on the precautionary principle. One of the problems in the risk management system is difficulty of exposure assessment. In this article, examples of exposure assessment in nanomaterial industries are reviewed with a focus on distinguishing engineered nanomaterial particles from background nanoparticles in workplace atmosphere. An approach by JNIOSH (Japan National Institute of Occupational Safety and Health) to quantitatively measure exposure to carbonaceous nanomaterials is also introduced. In addition to real-time measurements and qualitative analysis by electron microscopy, quantitative chemical analysis is necessary for quantitatively assessing exposure to nanomaterials. Chemical analysis is suitable for quantitative exposure measurement especially at facilities with high levels of background NPs.

7. EXTERIOR VIEW OF BALTIMORE FAN HOUSE, AIRWAY, AND HILLMAN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. EXTERIOR VIEW OF BALTIMORE FAN HOUSE, AIRWAY, AND HILLMAN FAN HOUSE LOOKING SOUTHEAST The roof of the 1908 Baltimore Fan House is to the left; the doorway opens onto the rear of the metal fan housing. In the immediate foreground is a section of the blast doors installed in the airway directly over the shaft to protect the fans in case of a mine explosion. The sloping airway, to the right, connects with the New Fan House, whose metal updraft chimney is evident in the right background. The engine house of the Hillman Fan House is in the left background with the fan housing and updraft chimney connected. The boiler house stack is in the background. All of the engines in the fan complex were powered by the boiler house. - Dorrance Colliery Fan Complex, South side of Susquehanna River at Route 115 & Riechard Street, Wilkes-Barre, Luzerne County, PA

Making Informed Decisions: The Role of Information Literacy in Ethical and Effective Engineering Design

ERIC Educational Resources Information Center

Fosmire, Michael

2017-01-01

Engineering designers must make evidence-based decisions when applying the practical tools and techniques of their discipline to human problems. Information literacy provides a structure for determining information gaps, locating appropriate and relevant information, applying that information effectively, and documenting and managing the knowledge…

Career Profiles- Aero-Mechanical Design- Operations Engineering Branch

NASA Image and Video Library

2015-10-26

NASA Armstrong’s Aeromechanical Design Group provides mechanical design solutions ranging from research and development to ground support equipment. With an aerospace or mechanical engineering background, team members use the latest computer-aided design software to create one-of-kind parts, assemblies, and drawings, and aid in the design’s fabrication and integration. Reverse engineering and inspection of Armstrong’s fleet of aircraft is made possible by using state-of-the-art coordinate measuring machines and laser scanning equipment.

26. Port side of engine room looking forward from aft ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

26. Port side of engine room looking forward from aft bulkhead. This area contains mostly electrical equipment. Two single-cylinder steam-driven dynamos are located near the engine bed, one at right foreground, the other in background. At left in image are a motor-generator set installed to convert DC current (from dynamos) to AC current. Edge-on view of control panel appears near center of image. - Ferry TICONDEROGA, Route 7, Shelburne, Chittenden County, VT

Study of Periodical Flow Heat Transfer in an Internal Combustion Engine

NASA Astrophysics Data System (ADS)

Luo, Xi

In-cylinder heat transfer is one of the most critical physical behaviors which has a direct influence on engine out emission and thermal efficiency for IC engine. In-cylinder wall temperature has to be precisely controlled to achieve high efficiency and low emission. However, this cannot be done without knowing gas-to-wall heat flux. This study reports on the development of a technique suitable for engine in-cylinder surface temperature measurement, as the traditional method is "hard to reach." A laser induced phosphorescence technique was used to study in-cylinder wall temperature effects on engine out unburned hydrocarbons during the engine transitional period (warm up). A linear correlation was found between the cylinder wall surface temperature and the unburned hydrocarbons at mediate and high charge densities. At low charge density, no clear correlation was observed because of miss-fire events. A new auto background correction infrared (IR) diagnostic was developed to measure the instantaneous in-cylinder surface temperature at 0.1 CAD resolution. A numerical mechanism was designed to suppress relatively low-frequency background noise and provide an accurate in-cylinder surface temperature measurements with an error of less than 1.4% inside the IC engine. In addition, a proposed optical coating reduced time delay errors by 50% compared to more conventional thermocouple techniques. A new cycle-averaged Res number was developed for an IC engine to capture the characteristics of engine flow. Comparison and scaling between different engine flow parameters are available by matching the averaged Res number. From experimental results, the engine flow motion was classified as intermittently turbulent, and it is different from the original fully developed turbulent assumption, which has previously been used in almost all engine simulations. The intermittent turbulence could have a great impact on engine heat transfer because of the transitional turbulence effect. Engine 3D CFD model further proves the existence of transitional turbulence flow. A new multi zone heat transfer model is proposed for IC engines only. The model includes pressure work effects and improved heat transfer prediction compared to the standard Law of the wall model.

21. RW Meyer Sugar Mill: 18761889. Simple, singlecylinder, horizontal, reciprocating ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. RW Meyer Sugar Mill: 1876-1889. Simple, single-cylinder, horizontal, reciprocating steam engine, model no. 1, 5' x 10', 6 hp, 175 rpm. Manufactured by Ames Iron Works, Oswego, New York, 1879. View: Steam engine powered the mill's centrifugals. Steam-feed pipe at top left of engine. Steam exhaust pipe leaves base of engine on right end and projects upwards. The boiler feed and supply pipe running water through the engine's pre-heat system are seen running to the lower left end of the engine. Pulley in the foreground was not used. The centrifugals were powered by a belt running from the flywheel in the background. Ball-type governor and pulley are on left end of the engine. - R. W. Meyer Sugar Mill, State Route 47, Kualapuu, Maui County, HI

Multi-Fuel Rotary Engine for General Aviation Aircraft

NASA Technical Reports Server (NTRS)

Jones, C.; Ellis, D. R.; Meng, P. R.

1983-01-01

Design studies, conducted for NASA, of Advanced Multi-fuel General Aviation and Commuter Aircraft Rotary Stratified Charge Engines are summarized. Conceptual design studies of an advanced engine sized to provide 186/250 shaft KW/HP under cruise conditions at 7620/25,000 m/ft. altitude were performed. Relevant engine development background covering both prior and recent engine test results of the direct injected unthrottled rotary engine technology, including the capability to interchangeably operate on gasoline, diesel fuel, kerosene, or aviation jet fuel, are presented and related to growth predictions. Aircraft studies, using these resultant growth engines, define anticipated system effects of the performance and power density improvements for both single engine and twin engine airplanes. The calculated results indicate superior system performance and 30 to 35% fuel economy improvement for the Rotary-engine airplanes as compared to equivalent airframe concept designs with current baseline engines. The research and technology activities required to attain the projected engine performance levels are also discussed.

Designing optimal cell factories: integer programming couples elementary mode analysis with regulation

PubMed Central

2012-01-01

Background Elementary mode (EM) analysis is ideally suited for metabolic engineering as it allows for an unbiased decomposition of metabolic networks in biologically meaningful pathways. Recently, constrained minimal cut sets (cMCS) have been introduced to derive optimal design strategies for strain improvement by using the full potential of EM analysis. However, this approach does not allow for the inclusion of regulatory information. Results Here we present an alternative, novel and simple method for the prediction of cMCS, which allows to account for boolean transcriptional regulation. We use binary linear programming and show that the design of a regulated, optimal metabolic network of minimal functionality can be formulated as a standard optimization problem, where EM and regulation show up as constraints. We validated our tool by optimizing ethanol production in E. coli. Our study showed that up to 70% of the predicted cMCS contained non-enzymatic, non-annotated reactions, which are difficult to engineer. These cMCS are automatically excluded by our approach utilizing simple weight functions. Finally, due to efficient preprocessing, the binary program remains computationally feasible. Conclusions We used integer programming to predict efficient deletion strategies to metabolically engineer a production organism. Our formulation utilizes the full potential of cMCS but adds additional flexibility to the design process. In particular our method allows to integrate regulatory information into the metabolic design process and explicitly favors experimentally feasible deletions. Our method remains manageable even if millions or potentially billions of EM enter the analysis. We demonstrated that our approach is able to correctly predict the most efficient designs for ethanol production in E. coli. PMID:22898474

Cost analysis of aquatic biomass systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-07-25

A cost analysis of aquatic biomass systems was conducted to provide the U.S. Department of Energy with engineering cost information on which to base decisions in the area of planning and executing research and development programs dealing with aquatic biomass as an alternative energy resource. Calculations show that several hundred 100 square mile aquatic biomass farms, the size selected by DOE staff for this analysis, would be needed to provide meaningful supplies of energy. With this background, specific engineering analyses were conducted on two original design concepts for 100 square mile aquatic biomass energy farms. These systems were an open-oceanmore » system and a land-based system; outstanding experts in all aspects of this project were called upon to participate and provide information in projecting the costs for harvested aquatic biomass for these systems. It was found that the projections of costs for harvested open-ocean biomass, utilizing optimistic assumptions of scientific and engineering design parameters, appear to be above any practical costs to be considered for energy. One of the major limitations is due to the need to provide upwelled sub-surface water containing needed nutrients, for which pumping energy is required. It is concluded from this analysis that large scale land-based aquatic biomass farms may merit development, but perhaps within a much narrower range than heretofore investigated. Aquatic plants which appear to have potential for development as an energy resource are the so-called emersed plants, or angiosperms, including many types of freshwater weeds such as duckweed, Hydrilla, and water hyacinths. It is recommended that substantially greater basic and applied knowledge on these aquatic biomass are needed, especially on growth rates and nutrient requirements.« less

Preoperational Subsurface Conditions at the Idaho Nuclear Technology and Engineering Center Service Waste Disposal Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ansley, Shannon Leigh

2002-02-01

The Idaho Nuclear Technology and Engineering Center (INTEC) Service Wastewater Discharge Facility replaces the existing percolation ponds as a disposal facility for the INTEC Service Waste Stream. A preferred alternative for helping decrease water content in the subsurface near INTEC, closure of the existing ponds is required by the INTEC Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Record of Decision (ROD) for Waste Area Group 3 Operable Unit 3-13 (DOE-ID 1999a). By August 2002, the replacement facility was constructed approximately 2 miles southwest of INTEC, near the Big Lost River channel. Because groundwater beneath the Idaho National Engineering andmore » Environmental Laboratory (INEEL) is protected under Federal and State of Idaho regulations from degradation due to INEEL activities, preoperational data required by U.S. Department of Energy (DOE) Order 5400.1 were collected. These data include preexisting physical, chemical, and biological conditions that could be affected by the discharge; background levels of radioactive and chemical components; pertinent environmental and ecological parameters; and potential pathways for human exposure or environmental impact. This document presents specific data collected in support of DOE Order 5400.1, including: four quarters of groundwater sampling and analysis of chemical and radiological parameters; general facility description; site specific geology, stratigraphy, soils, and hydrology; perched water discussions; and general regulatory requirements. However, in order to avoid duplication of previous information, the reader is directed to other referenced publications for more detailed information. Documents that are not readily available are compiled in this publication as appendices. These documents include well and borehole completion reports, a perched water evaluation letter report, the draft INEEL Wellhead Protection Program Plan, and the Environmental Checklist.« less

A Study of Vehicle Structural Layouts in Post-WWII Aircraft

NASA Technical Reports Server (NTRS)

Sensmeier, Mark D.; Samareh, Jamshid A.

2004-01-01

In this paper, results of a study of structural layouts of post-WWII aircraft are presented. This study was undertaken to provide the background information necessary to determine typical layouts, design practices, and industry trends in aircraft structural design. Design decisions are often predicated not on performance-related criteria, but rather on such factors as manufacturability, maintenance access, and of course cost. For this reason, a thorough understanding of current best practices in the industry is required as an input for the design optimization process. To determine these best practices and industry trends, a large number of aircraft structural cutaway illustrations were analyzed for five different aircraft categories (commercial transport jets, business jets, combat jet aircraft, single engine propeller aircraft, and twin-engine propeller aircraft). Several aspects of wing design and fuselage design characteristics are presented here for the commercial transport and combat aircraft categories. A great deal of commonality was observed for transport structure designs over a range of eras and manufacturers. A much higher degree of variability in structural designs was observed for the combat aircraft, though some discernable trends were observed as well.

Tags Extarction from Spatial Documents in Search Engines

NASA Astrophysics Data System (ADS)

Borhaninejad, S.; Hakimpour, F.; Hamzei, E.

2015-12-01

Nowadays the selective access to information on the Web is provided by search engines, but in the cases which the data includes spatial information the search task becomes more complex and search engines require special capabilities. The purpose of this study is to extract the information which lies in spatial documents. To that end, we implement and evaluate information extraction from GML documents and a retrieval method in an integrated approach. Our proposed system consists of three components: crawler, database and user interface. In crawler component, GML documents are discovered and their text is parsed for information extraction; storage. The database component is responsible for indexing of information which is collected by crawlers. Finally the user interface component provides the interaction between system and user. We have implemented this system as a pilot system on an Application Server as a simulation of Web. Our system as a spatial search engine provided searching capability throughout the GML documents and thus an important step to improve the efficiency of search engines has been taken.

SEG and AAPG: common background, common problems, common future

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larner, K.

1989-03-01

Today, products of the geophysical method are considered indispensable for geologic interpretation in petroleum exploration. Few exploration case histories today lack the evidence of seismic data upon which structural and stratigraphic interpretations have been constrained. Likewise, during the deep recession that exploration has been experiencing, exploration geophysicists are increasingly realizing that their tools have value only to the extent that they can yield geological and reservoir information that is more directly relevant to oil finding and field development than in the past. Geophysicists are now preoccupied with more than just their wavelets, static correction, and migration. As the papers inmore » this session indicate, geophysicists are extending their technology to estimate lithology, fluid content, monitoring of EOR efforts, and characterization and development of reservoirs. The three-dimensional seismic method, for example, is being brought right to the borehole with the use of the drill bit as the energy source. The futures of their two societies and their members are fully intertwined. Geologists and petroleum engineers who wish to gain considerably more information, cost-effectively, about their prospects, fields, and reservoirs must stay in touch with the exciting new developments from the geophysical community. Equally, geophysicists can maintain their relevance to oil finding only by staying closely in touch with developments in understanding of geology and the reservoir, and with the working interests and needs of geologists and petroleum engineers.« less

Effects of background stimulation upon eye-movement information.

PubMed

Nakamura, S

1996-04-01

To investigate the effects of background stimulation upon eye-movement information (EMI), the perceived deceleration of the target motion during pursuit eye movement (Aubert-Fleishl paradox) was analyzed. In the experiment, a striped pattern was used as a background stimulus with various brightness contrasts and spatial frequencies for serially manipulating the attributions of the background stimulus. Analysis showed that the retinal-image motion of the background stimulus (optic flow) affected eye-movement information and that the effects of optic flow became stronger when high contrast and low spatial frequency stripes were presented as the background stimulus. In conclusion, optic flow is one source of eye-movement information in determining real object motion, and the effectiveness of optic flow depends on the attributes of the background stimulus.

78 FR 32474 - Agency Information Collection Activities: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-30

...; Programs to strengthen scientific and engineering research potential; Science and engineering education... support applied research was added to the Organic Act. In 1980, The Science and Engineering Equal... NATIONAL SCIENCE FOUNDATION Agency Information Collection Activities: Comment Request AGENCY...

77 FR 31401 - Agency Information Collection Activities: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-25

...; Programs to strengthen scientific and engineering research potential; Science and engineering education... support applied research was added to the Organic Act. In 1980, The Science and Engineering Equal... NATIONAL SCIENCE FOUNDATION Agency Information Collection Activities: Comment Request AGENCY...

The Engineering Technician.

ERIC Educational Resources Information Center

American Society for Engineering Education, Washington, DC.

Occupational and educational information concerning 12 categories of engineering technicians and engineering technology is presented. This information covers the role of the technicians, student qualifications, typical job titles, and typical educational programs. The categories presented are (1) air conditioning, heating, and refrigeration, (2)…

76 FR 82111 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-30

.... FOR FURTHER INFORMATION CONTACT: Chris Parker, Aerospace Engineer, Propulsion Branch, ANM-140S, FAA... Information For more information about this AD, contact Chris Parker, Aerospace Engineer, Propulsion Branch...

76 FR 20051 - Advisory Committee for Computer and Information; Science and Engineering; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-11

... Engineering; Notice of Meeting In accordance with the Federal Advisory Committee Act (Pub. L. 92- 463, as... Committee for Computer and Information Science and Engineering--(1115). Date and Time: May 6, 2011 8:30 a.m... Engineering, National Science Foundation, 4201 Wilson Blvd., Suite 1105, Arlington, VA 22230. Telephone: (703...

77 FR 24538 - Advisory Committee for Computer and Information Science And Engineering; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-24

... Engineering; Notice of Meeting In accordance with the Federal Advisory Committee Act (Pub. L. 92- 463, as... Computer and Information Science and Engineering (1115). Date and Time: May 10, 2012 12 p.m.-5:30 p.m., May... Science and Engineering, National Science Foundation, 4201 Wilson Blvd., Suite 1105, Arlington VA 22230...

Preliminary assessment of rover power systems for the Mars Rover Sample Return Mission

NASA Technical Reports Server (NTRS)

Bents, David J.

1989-01-01

Four isotope power system concepts were presented and compared on a common basis for application to on-board electrical prime power for an autonomous planetary rover vehicle. A representative design point corresponding to the Mars Rover Sample Return (MRSR) preliminary mission requirements (500 W) was selected for comparison purposes. All systems concepts utilize the General Purpose Heat Source (GPHS) isotope heat source developed by DOE. Two of the concepts employ thermoelectric (TE) conversion: one using the GPHS Radioisotope Thermoelectric Generator (RTG) used as a reference case, the other using an advanced RTG with improved thermoelectric materials. The other two concepts employed are dynamic isotope power systems (DIPS): one using a closed Brayton cycle (CBC) turboalternator, and the other using a free piston Stirling cycle engine/linear alternator (FPSE) with integrated heat source/heater head. Near term technology levels have been assumed for concept characterization using component technology figure-of-merit values taken from the published literature. For example, the CBC characterization draws from the historical test database accumulated from space Brayton cycle subsystems and components from the NASA B engine through the mini-Brayton rotating unit. TE system performance is estimated from Voyager/multihundred Watt (MHW)-RTG flight experience through Mod-RTG performance estimates considering recent advances in TE materials under the DOD/DOE/NASA SP-100 and NASA Committee on Scientific and Technological Information programs. The Stirling DIPS system is characterized from scaled-down Space Power Demonstrator Engine (SPDE) data using the GPHS directly incorporated into the heater head. The characterization/comparison results presented here differ from previous comparison of isotope power (made for Low Earth Orbit (LEO) applications) because of the elevated background temperature on the Martian surface compared to LEO, and the higher sensitivity of dynamic systems to elevated sink temperature. The mass advantage of dynamic systems is significantly reduced for this application due to Mars' elevated background temperature.

Systematic Review of Quality of Patient Information on Liposuction in the Internet

PubMed Central

Zuk, Grzegorz; Eylert, Gertraud; Raptis, Dimitri Aristotle; Guggenheim, Merlin; Shafighi, Maziar

2016-01-01

Background: A large number of patients who are interested in esthetic surgery actively search the Internet, which represents nowadays the first source of information. However, the quality of information available in the Internet on liposuction is currently unknown. The aim of this study was to assess the quality of patient information on liposuction available in the Internet. Methods: The quantitative and qualitative assessment of Web sites was based on a modified Ensuring Quality Information for Patients tool (36 items). Five hundred Web sites were identified by the most popular web search engines. Results: Two hundred forty-five Web sites were assessed after duplicates and irrelevant sources were excluded. Only 72 (29%) Web sites addressed >16 items, and scores tended to be higher for professional societies, portals, patient groups, health departments, and academic centers than for Web sites developed by physicians, respectively. The Ensuring Quality Information for Patients score achieved by Web sites ranged between 8 and 29 of total 36 points, with a median value of 16 points (interquartile range, 14–18). The top 10 Web sites with the highest scores were identified. Conclusions: The quality of patient information on liposuction available in the Internet is poor, and existing Web sites show substantial shortcomings. There is an urgent need for improvement in offering superior quality information on liposuction for patients intending to undergo this procedure. PMID:27482498

Neighbourhood Built Environment Influences on Physical Activity among Adults: A Systematized Review of Qualitative Evidence

PubMed Central

Salvo, Grazia; Doyle-Baker, Patricia K.; McCormack, Gavin R.

2018-01-01

Qualitative studies can provide important information about how and why the built environment impacts physical activity decision-making—information that is important for informing local urban policies. We undertook a systematized literature review to synthesize findings from qualitative studies exploring how the built environment influences physical activity in adults. Our review included 36 peer-reviewed qualitative studies published from 1998 onwards. Our findings complemented existing quantitative evidence and provided additional insight into how functional, aesthetic, destination, and safety built characteristics influence physical activity decision-making. Sociodemographic characteristics (age, sex, ethnicity, and socioeconomic status) also impacted the BE’s influence on physical activity. Our review findings reinforce the need for synergy between transportation planning, urban design, landscape architecture, road engineering, parks and recreation, bylaw enforcement, and public health to be involved in creating neighbourhood environments that support physical activity. Our findings support a need for local neighbourhood citizens and associations with representation from individuals and groups with different sociodemographic backgrounds to have input into neighbourhood environment planning process. PMID:29724048

Effects of background motion on eye-movement information.

PubMed

Nakamura, S

1997-02-01

The effect of background stimulus on eye-movement information was investigated by analyzing the underestimation of the target velocity during pursuit eye movement (Aubert-Fleishl paradox). In the experiment, a striped pattern with various brightness contrasts and spatial frequencies was used as a background stimulus, which was moved at various velocities. Analysis showed that the perceived velocity of the pursuit target, which indicated the magnitudes of eye-movement information, decreased when the background stripes moved in the same direction as eye movement at higher velocities and increased when the background moved in the opposite direction. The results suggest that the eye-movement information varied as a linear function of the velocity of the motion of the background retinal image (optic flow). In addition, the effectiveness of optic flow on eye-movement information was determined by the attributes of the background stimulus such as the brightness contrast or the spatial frequency of the striped pattern.

40 CFR 86.337-79 - Information.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 19 2013-07-01 2013-07-01 false Information. 86.337-79 Section 86.337... Information. The following information, as applicable, shall be recorded for each test: (a) Engine description and specification. A copy of the information specified in this paragraph must accompany each engine...

40 CFR 86.337-79 - Information.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 18 2011-07-01 2011-07-01 false Information. 86.337-79 Section 86.337... Information. The following information, as applicable, shall be recorded for each test: (a) Engine description and specification. A copy of the information specified in this paragraph must accompany each engine...

40 CFR 86.337-79 - Information.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 19 2012-07-01 2012-07-01 false Information. 86.337-79 Section 86.337... Information. The following information, as applicable, shall be recorded for each test: (a) Engine description and specification. A copy of the information specified in this paragraph must accompany each engine...

40 CFR 86.337-79 - Information.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Information. 86.337-79 Section 86.337... Information. The following information, as applicable, shall be recorded for each test: (a) Engine description and specification. A copy of the information specified in this paragraph must accompany each engine...

Toward Mass Customization in the Age of Information: The Case for Open Engineering Systems

NASA Technical Reports Server (NTRS)

Simpson, Timothy W.; Lautenschlager, Uwe; Mistree, Farrokh

1997-01-01

In the Industrial Era, manufacturers used "dedicated" engineering systems to mass produce their products. In today's increasingly competitive markets, the trend is toward mass customization, something that becomes increasingly feasible when modern information technologies are used to create open engineering systems. Our focus is on how designers can provide enhanced product flexibility and variety (if not fully customized products) through the development of open engineering systems. After presenting several industrial examples, we anchor our new systems philosophy with two real engineering applications. We believe that manufacturers who adopt open systems will achieve competitive advantage in the Information Age.

The role of engineering in the flight equipment purchasing process

NASA Technical Reports Server (NTRS)

1977-01-01

The role of the airline engineering department in the flight equipment acquisition process is examined. The data for the study was collected from six airlines. The principal findings of the study include: (1) engineering activities permeate, but do not dominate the airline flight equipment decision process. (2) The principal criterion for the flight equipment acquisition decision is return on investment. (3) The principal sources of information for the airline engineering departments in the monitoring process are the manufacturers of equipment. Subsidiary information sources include NASA publications and conferences, among others and (4) The engineering department is the principal communication channel for technical information.

The fully integrated biomedical engineering programme at Eindhoven University of Technology.

PubMed

Slaaf, D W; van Genderen, M H P

2009-05-01

The development of a fully integrated biomedical engineering programme (life sciences included from the start) is described. Details are provided about background, implementation, and didactic concept: design centred learning combined with courses. The curriculum has developed into a bachelor-master's programme with two different master's degrees: Master's Degree in Biomedical Engineering and Master's Degree in Medical Engineering. Recently, the programme has adopted semester programming, has included a major and minor in the bachelor's degree phase, and a true bachelor's degree final project. Details about the programme and data about where graduates find jobs are provided in this paper.

Expedition 22 Change of Command in the U.S. Laboratory

NASA Image and Video Library

2010-03-17

ISS022-E-100383 (17 March 2010) --- Crew members aboard the International Space Station are pictured in the Destiny laboratory during the ceremony of Changing-of-Command from Expedition 22 to Expedition 23. Pictured are NASA astronauts Jeffrey Williams (right, holding microphone), Expedition 22 commander; and T.J. Creamer (second right), Expedition 22/23 flight engineer; Russian cosmonauts Oleg Kotov (left), Expedition 22 flight engineer and Expedition 23 commander; and Maxim Suraev (mostly obscured at left background), Expedition 22 flight engineer; along with Japan Aerospace Exploration Agency (JAXA) astronaut Soichi Noguchi, Expedition 22/23 flight engineer.

Expedition 22 Change of Command in the U.S. Laboratory

NASA Image and Video Library

2010-03-17

ISS022-E-100363 (17 March 2010) --- Crew members aboard the International Space Station are pictured in the Destiny laboratory during the ceremony of Changing-of-Command from Expedition 22 to Expedition 23. Pictured are NASA astronauts Jeffrey Williams (right, holding microphone), Expedition 22 commander; and T.J. Creamer (center background), Expedition 22/23 flight engineer; Russian cosmonauts Oleg Kotov (left), Expedition 22 flight engineer and Expedition 23 commander; and Maxim Suraev (bottom), Expedition 22 flight engineer; along with Japan Aerospace Exploration Agency (JAXA) astronaut Soichi Noguchi (mostly out of frame at right), Expedition 22/23 flight engineer.

Information Protection Engineering: Using Technology and Experience to Protect Assets

DTIC Science & Technology

2001-07-01

SAIC’s highly experienced team has developed technology, techniques and expertise in protecting these information assets from electronic attack by...criminals, terrorists, hackers or nation states. INFORMATION PROTECTION ENGINEERING : Using Technology and Experience to Protect Assets William J. Marlow... Engineering : Using Technology and Experience to Protect Assets Contract or Grant Number Program Element Number Authors Marlow, William J. Project

Integrated Intelligent training and job aiding for combustion turbine engines

NASA Technical Reports Server (NTRS)

Mckeithan, Clifford M., Jr.; Quentin, George H.

1993-01-01

This paper describes an ongoing program to augment such an expert system gas turbine startup advisor, known as the EPRI SA VANT System, by including an intelligent training package. It will give a brief background on the SA VANT development and an overview of its evolution into a full-blown Gas Turbine Information System (GTIS) for rapid access of on-line documentation, diagnostics, and training. In particular, the paper will address: (1) the conversion of the knowledge base used by the SA VANT startup advisor so that it can be used for both training and job aiding; and (2) the hypertext-oriented user manuals being incorporated into the system for rapidly accessing on-line documentation at the job site.

Cleanroom Garment Silicone Contamination

NASA Technical Reports Server (NTRS)

Geer, Wayne; Lepage, Colette

2006-01-01

The slide presentation reviews actions taken at Goddard Space Flight Center (GSFC) to eliminate contamination by silicone in clean rooms. Background information includes facilities and hardware affected by silicon contamination, a discussion of the negative aspects of silicone contamination, clean room garments, and how the problem was identified at GSFC. Actions taken by the GSFC Contamination Engineering Group and lessons learned are detailed. Results include: awareness of the silicone issue in laundry, increase in infrastructure and support of the testing lab, establishment of protocols for garment verification, closer relationship established with laundry and converter, specifications for laundry services and garments were strengthened, all consumables are tested before use in clean rooms, and established procedures were used to identify and treat silicone found on face masks.

Autonomous onboard crew operations: A review and developmental approach

NASA Technical Reports Server (NTRS)

Rogers, J. G.

1982-01-01

A review of the literature generated by an intercenter mission approach and consolidation team and their contractors was performed to obtain background information on the development of autonomous operations concepts for future space shuttle and space platform missions. The Boeing 757/767 flight management system was examined to determine the relevance for transfer of the developmental approach and technology to the performance of the crew operations function. In specific, the engine indications and crew alerting system was studied to determine the relevance of this display for the performance of crew operations onboard the vehicle. It was concluded that the developmental approach and technology utilized in the aeronautics industry would be appropriate for development of an autonomous operations concept for the space platform.

Engineering Lessons Learned and Systems Engineering Applications

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.

2005-01-01

Systems Engineering is fundamental to good engineering, which in turn depends on the integration and application of engineering lessons learned and technical standards. Thus, good Systems Engineering also depends on systems engineering lessons learned from within the aerospace industry being documented and applied. About ten percent of the engineering lessons learned documented in the NASA Lessons Learned Information System are directly related to Systems Engineering. A key issue associated with lessons learned datasets is the communication and incorporation of this information into engineering processes. Systems Engineering has been defined (EINIS-632) as "an interdisciplinary approach encompassing the entire technical effort to evolve and verify an integrated and life-cycle balanced set of system people, product, and process solutions that satisfy customer needs". Designing reliable space-based systems has always been a goal for NASA, and many painful lessons have been learned along the way. One of the continuing functions of a system engineer is to compile development and operations "lessons learned" documents and ensure their integration into future systems development activities. They can produce insights and information for risk identification identification and characterization. on a new project. Lessons learned files from previous projects are especially valuable in risk

Electromechanical Engineering Technology Curriculum.

ERIC Educational Resources Information Center

Georgia State Univ., Atlanta. Dept. of Vocational and Career Development.

This guide offers information and procedures necessary to train electromechanical engineering technicians. Discussed first are the rationale and objectives of the curriculum. The occupational field of electromechanical engineering technology is described. Next, a curriculum model is set forth that contains information on the standard…

77 FR 9272 - Agency Information Collection Activities: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-16

... Engineering Research Centers (ERCs). OMB Number: 3145-New. Type of Request: Intent to seek approval to establish an information collection. Abstract: Proposed Project: The Engineering Research Centers (ERC) program supports an integrated, interdisciplinary research environment to advance fundamental engineering...

[Biomedical information on the internet using search engines. A one-year trial].

PubMed

Corrao, Salvatore; Leone, Francesco; Arnone, Sabrina

2004-01-01

The internet is a communication medium and content distributor that provide information in the general sense but it could be of great utility regarding as the search and retrieval of biomedical information. Search engines represent a great deal to rapidly find information on the net. However, we do not know whether general search engines and meta-search ones are reliable in order to find useful and validated biomedical information. The aim of our study was to verify the reproducibility of a search by key-words (pediatric or evidence) using 9 international search engines and 1 meta-search engine at the baseline and after a one year period. We analysed the first 20 citations as output of each searching. We evaluated the formal quality of Web-sites and their domain extensions. Moreover, we compared the output of each search at the start of this study and after a one year period and we considered as a criterion of reliability the number of Web-sites cited again. We found some interesting results that are reported throughout the text. Our findings point out an extreme dynamicity of the information on the Web and, for this reason, we advice a great caution when someone want to use search and meta-search engines as a tool for searching and retrieve reliable biomedical information. On the other hand, some search and meta-search engines could be very useful as a first step searching for defining better a search and, moreover, for finding institutional Web-sites too. This paper allows to know a more conscious approach to the internet biomedical information universe.

Practical Application of Sociology in Systems Engineering

NASA Technical Reports Server (NTRS)

Watson, Michael D.; Andrews, James G.; Eckley, Jeri Cassel; Culver, Michael L.

2017-01-01

Systems engineering involves both the integration of the system and the integration of the disciplines which develop and operate the system. Integrating the disciplines is a sociological effort to bring together different groups, who often have different terminology, to achieve a common goal, the system. The focus for the systems engineer is information flow through the organization, between the disciplines, to ensure the system is developed and operated will all relevant information informing system decisions. The practical application of the sociology in systems engineering brings in various organizational development concepts including the principles of planned renegotiation and the application of principles to address information barriers created by organizational culture. Concepts such as specification of ignorance, consistent terminology, opportunity structures, role-sets, and the reclama (reconsideration) process are all important sociological approaches that help address the organizational social structure (culture). In bringing the disciplines together, the systems engineer must also be wary of social ambivalence, social anomie, social dysfunction, and insider-outsider behavior. Unintended consequences can result when these social issues are present. These issues can occur when localized subcultures shift from the overarching organizational culture, or when the organizational culture prevents achievement of system goals. These sociological principles provide the systems engineer with key approaches to manage the information flow through the organization as the disciplines are integrated and share their information and provides key sociological barriers to information flow through the organization. This paper will discuss the practical application of sociological principles to systems engineering.

[Study of the health food information for cancer patients on Japanese websites].

PubMed

Kishimoto, Keiko; Yoshino, Chie; Fukushima, Noriko

2010-08-01

The aim of this paper is to evaluate the reliability of websites providing health food information for cancer patients and, to assess the status to get this information online. We used four common Japanese search engines (Yahoo!, Google, goo, and MSN) to look up websites on Dec. 2, 2008. The search keywords were "health food" and "cancer". The websites for the first 100 hits generated by each search engine were screened and extracted by three conditions. We extracted 64 unique websites by the result of retrieval, of which 54 websites had information about health food factors. The two scales were used to evaluate the quality of the content on 54 websites. On the scale of reliability of information on the Web, the average score was 2.69+/-1.70 (maximum 6) and the median was 2.5. The other scale was matter need to check whether listed to use safely this information. On this scale, the average score was 0.72+/-1.22 (maximum 5) and the median was 0. Three engines showed poor correlation between the ranking and the latter score. But several websites on the top indicated 0 score. Fifty-four websites were extracted with one to four engines and the average number of search engines was 1.9. The two scales were positively correlated with the number of search engines, but these correlations were very poor. Ranking high and extraction by multiple search engines were of minor benefit to pick out more reliable information.

PREFACE: The Irago Conference 2012

NASA Astrophysics Data System (ADS)

Sandhu, Adarsh; Okada, Hiroshi

2013-04-01

The Irago Conference 2012 - 360 degree outlook on critical scientific and technological challenges for a sustainable society Organized by the Electronics-Inspired Interdisciplinary Research Institute (EIIRIS) at Toyohashi University of Technology, the Irago Conference, held recently (15-16 November) in Aichi, Japan, aimed to enhance mutual understanding between scientists, engineers and policymakers. Over 180 participants tackled topics ranging from energy and natural resources to public health and disaster prevention. The 360-degree outlook of the conference impressed speakers and guests. ''This conference has been extremely informative,'' noted Robert Gellar from the University of Tokyo. ''A unique conference with experts from a range of backgrounds,'' agreed Uracha Ruktanonchai from the National Nanotechnology Center (NANOTEC) in Thailand. Similarly, G P Li, professor of electrical engineering and computer science at the University of California Irvine commented that he had been ''able to think the unthinkable'' as a range of topics came together. The conference was streamed live on Ustream to ensure that researchers from across the world could benefit from thought-provoking presentations examining global issues such as energy, disaster mitigation and nanotechnology. ''This was wonderful,'' said Oussama Khatib from Stanford University, ''A good recipe of speakers from such a range of backgrounds.'' Manuscripts submitted to the organizers were peer-reviewed, and the papers in this proceedings were accepted for Journal of Physics: Conference Series. In addition to the formal speaker programme, graduate-student sessions provided a platform for graduate students to describe their latest findings as oral presentations. A series of excursions to relevant locations, such as the Tahara megasolar region under construction and a local car-manufacturing factory, gave participants the opportunity to further consider practical applications of their research in industry. Irago Conference 2013 is scheduled to be held in October 2013 as a platform for participants from a wide range of backgrounds and specialities to interact and discuss solutions to increasingly important environmental, social, and technological challenges people of the 21st century. Conference photograph

40 CFR 86.884-10 - Information.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 19 2014-07-01 2014-07-01 false Information. 86.884-10 Section 86.884... Heavy-Duty Engines; Smoke Exhaust Test Procedure § 86.884-10 Information. The following information, as... information specified in this paragraph must accompany each engine sent to the Administrator for compliance...

46 CFR 27.201 - What are the requirements for general alarms on towing vessels?

Code of Federal Regulations, 2012 CFR

2012-10-01

... emergency. (2) Is capable of notifying persons in any accommodation, work space, and the engine room. (3) Has installed, in the engine room and any other area where background noise makes a general alarm hard to hear, a supplemental flashing red light that is identified with a sign that reads: Attention...

46 CFR 27.201 - What are the requirements for general alarms on towing vessels?

Code of Federal Regulations, 2013 CFR

2013-10-01

... emergency. (2) Is capable of notifying persons in any accommodation, work space, and the engine room. (3) Has installed, in the engine room and any other area where background noise makes a general alarm hard to hear, a supplemental flashing red light that is identified with a sign that reads: Attention...

46 CFR 27.201 - What are the requirements for general alarms on towing vessels?

Code of Federal Regulations, 2010 CFR

2010-10-01

... emergency. (2) Is capable of notifying persons in any accommodation, work space, and the engine room. (3) Has installed, in the engine room and any other area where background noise makes a general alarm hard to hear, a supplemental flashing red light that is identified with a sign that reads: Attention...

46 CFR 27.201 - What are the requirements for general alarms on towing vessels?

Code of Federal Regulations, 2011 CFR

2011-10-01

... emergency. (2) Is capable of notifying persons in any accommodation, work space, and the engine room. (3) Has installed, in the engine room and any other area where background noise makes a general alarm hard to hear, a supplemental flashing red light that is identified with a sign that reads: Attention...

46 CFR 27.201 - What are the requirements for general alarms on towing vessels?

Code of Federal Regulations, 2014 CFR

2014-10-01

... emergency. (2) Is capable of notifying persons in any accommodation, work space, and the engine room. (3) Has installed, in the engine room and any other area where background noise makes a general alarm hard to hear, a supplemental flashing red light that is identified with a sign that reads: Attention...

Vertical Stream Curricula Integration of Problem-Based Learning Using an Autonomous Vacuum Robot in a Mechatronics Course

ERIC Educational Resources Information Center

Chin, Cheng; Yue, Keng

2011-01-01

Difficulties in teaching a multi-disciplinary subject such as the mechatronics system design module in Departments of Mechatronics Engineering at Temasek Polytechnic arise from the gap in experience and skill among staff and students who have different backgrounds in mechanical, computer and electrical engineering within the Mechatronics…

Photocopy of photograph (original print located at Engineering Management Building, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of photograph (original print located at Engineering Management Building, Naval Shipyard, Long Beach). Navy Photograph, July 4, 1942, Photograph #2229. MAIN GATE 1, FROM OUTSIDE (NORTH) OF ENTRANCE, FACING SOUTHWEST (WITH BUILDING 40 IN BACKGROUND) - Roosevelt Base, Main Gate No. 1, Ocean Boulevard where Nevada & Maryland Street meet, Long Beach, Los Angeles County, CA

Needs Analysis in ESP Context: Saudi Engineering Students as a Case Study

ERIC Educational Resources Information Center

Alsamadani, Hashem Ahmed

2017-01-01

Needs analysis can be a vital asset for teachers of English for specific purposes (ESP) to identify their learners' key requirements or needs and determine the areas in which they are lacking skills. Against this background, this study was undertaken during the academic year 2015-16 to define the English language needs of engineering students…

Impact of an Engineering Design-Based Curriculum Compared to an Inquiry-Based Curriculum on Fifth Graders' Content Learning of Simple Machines

ERIC Educational Resources Information Center

Marulcu, Ismail; Barnett, Michael

2016-01-01

Background: Elementary Science Education is struggling with multiple challenges. National and State test results confirm the need for deeper understanding in elementary science education. Moreover, national policy statements and researchers call for increased exposure to engineering and technology in elementary science education. The basic…

Multi-fuel rotary engine for general aviation aircraft

NASA Technical Reports Server (NTRS)

Jones, C.; Ellis, D. R.; Meng, P. R.

1983-01-01

Design studies of advanced multifuel general aviation and commuter aircraft rotary stratified charge engines are summarized. Conceptual design studies were performed at two levels of technology, an advanced general aviation engines sized to provide 186/250 shaft kW/hp under cruise conditions at 7620 (25,000 m/ft) altitude. A follow on study extended the results to larger (2500 hp max.) engine sizes suitable for applications such as commuter transports and helicopters. The study engine designs were derived from relevant engine development background including both prior and recent engine test results using direct injected unthrottled rotary engine technology. Aircraft studies, using these resultant growth engines, define anticipated system effects of the performance and power density improvements for both single engine and twin engine airplanes. The calculated results indicate superior system performance and 27 to 33 percent fuel economy improvement for the rotary engine airplanes as compared to equivalent airframe concept designs with current baseline engines. The research and technology activities required to attain the projected engine performance levels are also discussed. Previously announced in STAR as N83-18910

ELF Communications System Ecological Monitoring Program: Electromagnetic Field Measurements and Engineering Support-1991

DTIC Science & Technology

1992-12-01

engineering support for completed studies--namely, the wetlands, slime mold , and bird species and communities studies performed in Wisconsin-appears in previous...3 4. ENGINEERING SUPPORT ACTIVITIES 4.1 Soil Amoeba Growth Chambers 4.1.1 Background 3 The soil amoeba and now-completed slime mold studies both...cultures of soil amoeba and slime mold to the earth’s ambient temperature. It is also desirable to expose the cultures to the same EM environment that they

Accuracy and Speed of Response to Different Voice Types in a Cockpit Voice Warning System

DTIC Science & Technology

1983-09-01

military aircraft. Different levels of engine background noise, signal to noise ratio of the warning message, and precursor delivery formats were used. The...flight deck signals, the Society of Automotive Engineers stated that a unique, attention-getting sound (such as a chime, 4 etc.) together with voice...aircr,-ft wherein there is no flight engineer position" (cited in Thorburn, 1971, p. 3). The AFIAS letter cited several incidents in which the VWS had

Resource theory for work and heat

NASA Astrophysics Data System (ADS)

Sparaciari, Carlo; Oppenheim, Jonathan; Fritz, Tobias

2017-11-01

Several recent results on thermodynamics have been obtained using the tools of quantum information theory and resource theories. So far, the resource theories utilized to describe thermodynamics have assumed the existence of an infinite thermal reservoir, by declaring that thermal states at some background temperature come for free. Here, we propose a resource theory of quantum thermodynamics without a background temperature, so that no states at all come for free. We apply this resource theory to the case of many noninteracting systems and show that all quantum states are classified by their entropy and average energy, even arbitrarily far away from equilibrium. This implies that thermodynamics takes place in a two-dimensional convex set that we call the energy-entropy diagram. The answers to many resource-theoretic questions about thermodynamics can be read off from this diagram, such as the efficiency of a heat engine consisting of finite reservoirs, or the rate of conversion between two states. This allows us to consider a resource theory which puts work and heat on an equal footing, and serves as a model for other resource theories.

Development of an Aura Chemical Reanalysis in support Air Quality Applications

NASA Astrophysics Data System (ADS)

Pierce, R. B.; Lenzen, A.; Schaack, T.

2015-12-01

We present results of chemical data assimilation experiments utilizing the NOAA National Environmental Satellite, Data, and Information Service (NESDIS), University of Wisconsin Space Science and Engineering (SSEC) Real-time Air Quality Modeling System (RAQMS) in conjunction with the NOAA National Centers for Environmental Prediction (NCEP) Operational Gridpoint Statistical Interpolation (GSI) 3-dimensional variational data assimilation system. The impact of assimilating NASA Ozone Monitoring Instrument (OMI) total column ozone, OMI tropospheric nitrogen dioxide columns, and Microwave Limb Sounder (MLS) stratospheric ozone profiles on background ozone is assessed using measurements from the 2010 NSF High-performance Instrumented Airborne Platform for Environmental Research (HIAPER) Pole-to-Pole Observation (HIPPO) and NOAA California Nexus (CalNex) campaigns. Results show that the RAQMS/GSI Chemical Reanalysis is able to provide very good estimates of background ozone and large-scale ozone variability and is suitable for use in constraining regional air quality modeling activities. These experiments are being used to guide the development of a multi-year global chemical and aerosol reanalysis using NASA Aura and A-Train measurements to support air quality applications.

Research on Agriculture Domain Meta-Search Engine System

NASA Astrophysics Data System (ADS)

Xie, Nengfu; Wang, Wensheng

The rapid growth of agriculture web information brings a fact that search engine can not return a satisfied result for users’ queries. In this paper, we propose an agriculture domain search engine system, called ADSE, that can obtains results by an advance interface to several searches and aggregates them. We also discuss two key technologies: agriculture information determination and engine.

Brief 76 Nuclear Engineering Enrollments and Degrees Survey, 2015 Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The 2015 Nuclear Engineering Enrollments and Degrees Survey reports degrees granted between September 1, 2014 and August 31, 2015. Enrollment information refers to the fall term 2015. The enrollments and degrees data comprises students majoring in nuclear engineering or in an option program equivalent to a major. Thirty-five academic programs reported having nuclear engineering programs during 2015, and data was received from all thirty-five programs. The report includes enrollment information on undergraduate students and graduate students and information by degree level for post-graduation plans.

77 FR 58415 - Large Scale Networking (LSN); Joint Engineering Team (JET)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-20

... NATIONAL SCIENCE FOUNDATION Large Scale Networking (LSN); Joint Engineering Team (JET) AGENCY: The Networking and Information Technology Research and Development (NITRD) National Coordination Office (NCO..._Engineering_Team_ (JET). SUMMARY: The JET, established in 1997, provides for information sharing among Federal...

78 FR 70076 - Large Scale Networking (LSN)-Joint Engineering Team (JET)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-22

... NATIONAL SCIENCE FOUNDATION Large Scale Networking (LSN)--Joint Engineering Team (JET) AGENCY: The Networking and Information Technology Research and Development (NITRD) National Coordination Office (NCO..._Engineering_Team_ (JET)#title. SUMMARY: The JET, established in 1997, provides for information sharing among...

Mechanical Engineering Technology Curriculum.

ERIC Educational Resources Information Center

Georgia State Univ., Atlanta. Dept. of Vocational and Career Development.

This guide offers information and procedures necessary to train mechanical engineering technicians. Discussed first are the rationale and objectives of the curriculum. The occupational field of mechanical engineering technology is described. Next, a curriculum model is set forth that contains information on the standard mechanical engineering…

Variability of patient spine education by Internet search engine.

PubMed

Ghobrial, George M; Mehdi, Angud; Maltenfort, Mitchell; Sharan, Ashwini D; Harrop, James S

2014-03-01

Patients are increasingly reliant upon the Internet as a primary source of medical information. The educational experience varies by search engine, search term, and changes daily. There are no tools for critical evaluation of spinal surgery websites. To highlight the variability between common search engines for the same search terms. To detect bias, by prevalence of specific kinds of websites for certain spinal disorders. Demonstrate a simple scoring system of spinal disorder website for patient use, to maximize the quality of information exposed to the patient. Ten common search terms were used to query three of the most common search engines. The top fifty results of each query were tabulated. A negative binomial regression was performed to highlight the variation across each search engine. Google was more likely than Bing and Yahoo search engines to return hospital ads (P=0.002) and more likely to return scholarly sites of peer-reviewed lite (P=0.003). Educational web sites, surgical group sites, and online web communities had a significantly higher likelihood of returning on any search, regardless of search engine, or search string (P=0.007). Likewise, professional websites, including hospital run, industry sponsored, legal, and peer-reviewed web pages were less likely to be found on a search overall, regardless of engine and search string (P=0.078). The Internet is a rapidly growing body of medical information which can serve as a useful tool for patient education. High quality information is readily available, provided that the patient uses a consistent, focused metric for evaluating online spine surgery information, as there is a clear variability in the way search engines present information to the patient. Published by Elsevier B.V.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 56: Technical Communications in Engineering and Science: The Practices Within a Government Defense Laboratory

NASA Technical Reports Server (NTRS)

VonSeggern, Marilyn; Jourdain, Janet M.; Pinelli, Thomas E.

1996-01-01

Research in recent decades has identified the varied information needs of engineers versus scientists. While most of that research looked at the differences among organizations, we surveyed engineers and scientists within a single Air Force research and development laboratory about their information gathering, usage, and production practices. The results of the Phillips Laboratory survey confirm prior assumptions about distinctions between engineering and science. Because military employees responded at a much higher rate than civilian staff, the survey also became an opportunity to profile a little-known segment of the engineer/scientist population. In addition to the effect Phillips Laboratory's stated mission may have on member engineers and scientists, other factors causing variations in technical communication and information-related activities are identified.

40 CFR 89.405 - Recorded information.

Code of Federal Regulations, 2013 CFR

2013-07-01

... temperature outlet. (10) Engine fuel inlet temperature at the pump inlet. (f) Test data; post-test. (1...) CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Exhaust Emission Test..., where applicable, for each test. (b) Engine description and specification. A copy of the information...

40 CFR 89.405 - Recorded information.

Code of Federal Regulations, 2012 CFR

2012-07-01

... temperature outlet. (10) Engine fuel inlet temperature at the pump inlet. (f) Test data; post-test. (1...) CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Exhaust Emission Test..., where applicable, for each test. (b) Engine description and specification. A copy of the information...

40 CFR 89.405 - Recorded information.

Code of Federal Regulations, 2010 CFR

2010-07-01

... temperature outlet. (10) Engine fuel inlet temperature at the pump inlet. (f) Test data; post-test. (1...) CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Exhaust Emission Test..., where applicable, for each test. (b) Engine description and specification. A copy of the information...

40 CFR 89.405 - Recorded information.

Code of Federal Regulations, 2014 CFR

2014-07-01

... temperature outlet. (10) Engine fuel inlet temperature at the pump inlet. (f) Test data; post-test. (1...) CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Exhaust Emission Test..., where applicable, for each test. (b) Engine description and specification. A copy of the information...

40 CFR 89.405 - Recorded information.

Code of Federal Regulations, 2011 CFR

2011-07-01

... temperature outlet. (10) Engine fuel inlet temperature at the pump inlet. (f) Test data; post-test. (1...) CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES Exhaust Emission Test..., where applicable, for each test. (b) Engine description and specification. A copy of the information...

40 CFR 86.1829-01 - Durability and emission testing requirements; waivers.

Code of Federal Regulations, 2013 CFR

2013-07-01

... manufacturer's engineering evaluation of appropriate high-altitude emission testing, all light-duty vehicles... tests, development tests, or other appropriate information and good engineering judgment. (B) In lieu of... emission tests, development tests, or other appropriate information and good engineering judgment. (C) A...

NASA software documentation standard software engineering program

NASA Technical Reports Server (NTRS)

1991-01-01

The NASA Software Documentation Standard (hereinafter referred to as Standard) can be applied to the documentation of all NASA software. This Standard is limited to documentation format and content requirements. It does not mandate specific management, engineering, or assurance standards or techniques. This Standard defines the format and content of documentation for software acquisition, development, and sustaining engineering. Format requirements address where information shall be recorded and content requirements address what information shall be recorded. This Standard provides a framework to allow consistency of documentation across NASA and visibility into the completeness of project documentation. This basic framework consists of four major sections (or volumes). The Management Plan contains all planning and business aspects of a software project, including engineering and assurance planning. The Product Specification contains all technical engineering information, including software requirements and design. The Assurance and Test Procedures contains all technical assurance information, including Test, Quality Assurance (QA), and Verification and Validation (V&V). The Management, Engineering, and Assurance Reports is the library and/or listing of all project reports.

Building information modelling review with potential applications in tunnel engineering of China.

PubMed

Zhou, Weihong; Qin, Haiyang; Qiu, Junling; Fan, Haobo; Lai, Jinxing; Wang, Ke; Wang, Lixin

2017-08-01

Building information modelling (BIM) can be applied to tunnel engineering to address a number of problems, including complex structure, extensive design, long construction cycle and increased security risks. To promote the development of tunnel engineering in China, this paper combines actual cases, including the Xingu mountain tunnel and the Shigu Mountain tunnel, to systematically analyse BIM applications in tunnel engineering in China. The results indicate that BIM technology in tunnel engineering is currently mainly applied during the design stage rather than during construction and operation stages. The application of BIM technology in tunnel engineering covers many problems, such as a lack of standards, incompatibility of different software, disorganized management, complex combination with GIS (Geographic Information System), low utilization rate and poor awareness. In this study, through summary of related research results and engineering cases, suggestions are introduced and an outlook for the BIM application in tunnel engineering in China is presented, which provides guidance for design optimization, construction standards and later operation maintenance.

Building information modelling review with potential applications in tunnel engineering of China

PubMed Central

Zhou, Weihong; Qin, Haiyang; Fan, Haobo; Lai, Jinxing; Wang, Ke; Wang, Lixin

2017-01-01

Building information modelling (BIM) can be applied to tunnel engineering to address a number of problems, including complex structure, extensive design, long construction cycle and increased security risks. To promote the development of tunnel engineering in China, this paper combines actual cases, including the Xingu mountain tunnel and the Shigu Mountain tunnel, to systematically analyse BIM applications in tunnel engineering in China. The results indicate that BIM technology in tunnel engineering is currently mainly applied during the design stage rather than during construction and operation stages. The application of BIM technology in tunnel engineering covers many problems, such as a lack of standards, incompatibility of different software, disorganized management, complex combination with GIS (Geographic Information System), low utilization rate and poor awareness. In this study, through summary of related research results and engineering cases, suggestions are introduced and an outlook for the BIM application in tunnel engineering in China is presented, which provides guidance for design optimization, construction standards and later operation maintenance. PMID:28878970

Building information modelling review with potential applications in tunnel engineering of China

NASA Astrophysics Data System (ADS)

Zhou, Weihong; Qin, Haiyang; Qiu, Junling; Fan, Haobo; Lai, Jinxing; Wang, Ke; Wang, Lixin

2017-08-01

Building information modelling (BIM) can be applied to tunnel engineering to address a number of problems, including complex structure, extensive design, long construction cycle and increased security risks. To promote the development of tunnel engineering in China, this paper combines actual cases, including the Xingu mountain tunnel and the Shigu Mountain tunnel, to systematically analyse BIM applications in tunnel engineering in China. The results indicate that BIM technology in tunnel engineering is currently mainly applied during the design stage rather than during construction and operation stages. The application of BIM technology in tunnel engineering covers many problems, such as a lack of standards, incompatibility of different software, disorganized management, complex combination with GIS (Geographic Information System), low utilization rate and poor awareness. In this study, through summary of related research results and engineering cases, suggestions are introduced and an outlook for the BIM application in tunnel engineering in China is presented, which provides guidance for design optimization, construction standards and later operation maintenance.

Social-Cognitive Predictors of STEM Career Interests and Goal Persistence in College Students with Disabilities from Racial and Ethnic Minority Backgrounds

ERIC Educational Resources Information Center

da Silva Cardoso, Elizabeth; Dutta, Alo; Chiu, Chung-Yi; Johnson, Ebonee T.; Kundu, Madan; Chan, Fong D.

2013-01-01

Objective: To examine the relations of science, technology, engineering, and mathematics's (STEM) self-efficacy, outcome expectations, interests, and contextual supports and barriers to STEM educational goals in college students with disabilities from racial and ethnic minority backgrounds. Design: Quantitative descriptive research design using…

An Assessment of the Impact of a Collaborative Didactic Approach and Students' Background in Teaching Computer Animation

ERIC Educational Resources Information Center

Sanna, Andrea; Valpreda, Fabrizio

2017-01-01

The purpose of this study was to compare different students' backgrounds and two different didactic methodologies to profitably teach computer animation in Italian schools of design and engineering. Teachers and instructors have long been engaged in discussions to define effective curricula for teaching computer animation. Various…

The Teachers' Role in Developing, Opening, and Nurturing an Inclusive STEM-Focused School

ERIC Educational Resources Information Center

Slavit, David; Nelson, Tamara Holmlund; Lesseig, Kristin

2016-01-01

Background: This study is about teachers' collective activity during the development and initial year of a science, technology, engineering, and mathematics (STEM)-focused school in the USA. The target school of this study was inclusive, as it sought admission of students from varying backgrounds and levels of ability. Drawing from narrative…

A Case Study Exploring Science Competence and Science Confidence of Middle School Girls from Marginalized Backgrounds

ERIC Educational Resources Information Center

Garcia, Yeni Violeta

2013-01-01

The inclusion of learners from underrepresented background in biology field research experiences has not been widely explored in the literature. Increased access and equity to experiences for groups historically underrepresented in science, technology, engineering, and mathematics (STEM) has been identified as a priority for many, yet little is…

Engineering Ethics Education : Its Necessity, Objectives, Methods, Current State, and Challenges

NASA Astrophysics Data System (ADS)

Fudano, Jun

The importance of engineering ethics education has become widely recognized in the industrialized countries including Japan. This paper examines the background against which engineering ethics education is required, and reviews its objectives, methods, and challenges, as well as its current state. In pointing out important issues associated with the apparent acceptance and quantitative development of ethics education, especially after the establishment of the Japan Accreditation Board for Engineering Education in 1999, the author stresses that the most serious problem is the lack of common understanding on the objectives of engineering ethics education. As a strategy to improve the situation, the so-called “Ethics-across-the-Curriculum” approach is introduced. The author also claims that business/organization ethics which is consistent with engineering ethics should be promoted in Japan.

IntegromeDB: an integrated system and biological search engine

PubMed Central

2012-01-01

Background With the growth of biological data in volume and heterogeneity, web search engines become key tools for researchers. However, general-purpose search engines are not specialized for the search of biological data. Description Here, we present an approach at developing a biological web search engine based on the Semantic Web technologies and demonstrate its implementation for retrieving gene- and protein-centered knowledge. The engine is available at http://www.integromedb.org. Conclusions The IntegromeDB search engine allows scanning data on gene regulation, gene expression, protein-protein interactions, pathways, metagenomics, mutations, diseases, and other gene- and protein-related data that are automatically retrieved from publicly available databases and web pages using biological ontologies. To perfect the resource design and usability, we welcome and encourage community feedback. PMID:22260095

Uncertainty in Calibration, Detection and Estimation of Metal Concentrations in Engine Plumes Using OPAD

NASA Technical Reports Server (NTRS)

Hopkins, Randall C.; Benzing, Daniel A.

1998-01-01

Improvements in uncertainties in the values of radiant intensity (I) can be accomplished mainly by improvements in the calibration process and in minimizing the difference between the background and engine plume radiance. For engine tests in which the plume is extremely bright, the difference in luminance between the calibration lamp and the engine plume radiance can be so large as to cause relatively large uncertainties in the values of R. This is due to the small aperture necessary on the receiving optics to avoid saturating the instrument. However, this is not a problem with the SSME engine since the liquid oxygen/hydrogen combustion is not as bright as some other fuels. Applying the instrumentation to other type engine tests may require a much brighter calibration lamp.

Neutral details associated with emotional events are encoded: evidence from a cued recall paradigm.

PubMed

Mickley Steinmetz, Katherine R; Knight, Aubrey G; Kensinger, Elizabeth A

2016-11-01

Enhanced emotional memory often comes at the cost of memory for surrounding background information. Narrowed-encoding theories suggest that this is due to narrowed attention for emotional information at encoding, leading to impaired encoding of background information. Recent work has suggested that an encoding-based theory may be insufficient. Here, we examined whether cued recall-instead of previously used recognition memory tasks-would reveal evidence that non-emotional information associated with emotional information was effectively encoded. Participants encoded positive, negative, or neutral objects on neutral backgrounds. At retrieval, they were given either the item or the background as a memory cue and were asked to recall the associated scene element. Counter to narrowed-encoding theories, emotional items were more likely than neutral items to trigger recall of the associated background. This finding suggests that there is a memory trace of this contextual information and that emotional cues may facilitate retrieval of this information.

Defining and Exposing Privacy Issues with Social Media

DTIC Science & Technology

2012-06-11

Twitter, and Linked In[ I 0). VI. SEARCH ENGINES In addition to social networking sites, search engines pose new issues to privacy. As...networking, search engines , and storing personal information online in general have been accepted worldwide due to the benefits they provide. Social...networking provides even more communication in an information-demanding age, allowing users to interact across great distances. Search engines allow

A general engineering scenario for concurrent engineering environments

NASA Astrophysics Data System (ADS)

Mucino, V. H.; Pavelic, V.

The paper describes an engineering method scenario which categorizes the various activities and tasks into blocks seen as subjects which consume and produce data and information. These methods, tools, and associated utilities interact with other engineering tools by exchanging information in such a way that a relationship between customers and suppliers of engineering data is established clearly, while data exchange consistency is maintained throughout the design process. The events and data transactions are presented in the form of flowcharts in which data transactions represent the connection between the various bricks, which in turn represent the engineering activities developed for the particular task required in the concurrent engineering environment.

Vehicle emissions and consumer information in car advertisements

PubMed Central

Wilson, Nick; Maher, Anthony; Thomson, George; Keall, Michael

2008-01-01

Background The advertising of vehicles has been studied from a safety perspective but not in terms of vehicle air pollutants. We aimed to examine the content and trends of greenhouse gas emissions and air pollution-related information, in light passenger vehicle advertisements. Methods Content analysis of the two most popular current affairs magazines in New Zealand for the five year period 2001–2005 was undertaken (n = 514 advertisements). This was supplemented with vehicle data from official websites. Results The advertisements studied provided some information on fuel type (52%), and engine size (39%); but hardly any provided information on fuel efficiency (3%), or emissions (4%). Over the five-year period the reported engine size increased significantly, while fuel efficiency did not improve. For the vehicles advertised, for which relevant official website data could be obtained, the average "greenhouse rating" for carbon dioxide (CO2) emissions was 5.1, with a range from 0.5 to 8.5 (on a scale with 10 being the best and 0.5 being the most polluting). The average CO2 emissions were 50% higher than the average for cars made by European manufacturers. The average "air pollution" rating for the advertised vehicles was 5.4 (on the same 1–10 scale). The yearly averages for the "greenhouse" or "air pollution" ratings did not change significantly over the five-year period. One advertised hybrid vehicle had a fuel consumption that was under half the average (4.4 versus 9.9 L/100 km), as well as the best "greenhouse" and "air pollution" ratings. Conclusion To enhance informed consumer choice and to control greenhouse gas and air pollution emissions, governments should introduce regulations on the content of vehicle advertisements and marketing (as started by the European Union). Similar regulations are already in place for the marketing of many other consumer products. PMID:18445291

40 CFR 1033.625 - Special certification provisions for non-locomotive-specific engines.

Code of Federal Regulations, 2014 CFR

2014-07-01

... name of the engine manufacturer and engine family identifier for the engines. (ii) A brief engineering... proprietary engine software. Note that this allowance to separately submit some of the information required by...

40 CFR 1033.625 - Special certification provisions for non-locomotive-specific engines.

Code of Federal Regulations, 2012 CFR

2012-07-01

... name of the engine manufacturer and engine family identifier for the engines. (ii) A brief engineering... proprietary engine software. Note that this allowance to separately submit some of the information required by...

40 CFR 1033.625 - Special certification provisions for non-locomotive-specific engines.

Code of Federal Regulations, 2013 CFR

2013-07-01

... name of the engine manufacturer and engine family identifier for the engines. (ii) A brief engineering... proprietary engine software. Note that this allowance to separately submit some of the information required by...

78 FR 49781 - Notice of Intent To Seek Approval To Establish an Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-15

... computer and information science and engineering. Awardees will be required to submit annual project... through the use of automated collection techniques or other forms of information technology. DATES...: Title of Collection: Computer and Information Science and Engineering Reporting Requirements. OMB Number...

Reverse-Time Imaging Based on Full-Waveform Inverted Velocity Model for Nondestructive Testing of Heterogeneous Engineered Structures

NASA Astrophysics Data System (ADS)

Nguyen, L. T.; Modrak, R. T.; Saenger, E. H.; Tromp, J.

2017-12-01

Reverse-time migration (RTM) can reconstruct reflectors and scatterers by cross-correlating the source wavefield and the receiver wavefield given a known velocity model of the background. In nondestructive testing, however, the engineered structure under inspection is often composed of layers of various materials and the background material has been degraded non-uniformly because of environmental or operational effects. On the other hand, ultrasonic waveform tomography based on the principles of full-waveform inversion (FWI) has succeeded in detecting anomalous features in engineered structures. But the building of the wave velocity model of the comprehensive small-size and high-contrast defect(s) is difficult because it requires computationally expensive high-frequency numerical wave simulations and an accurate understanding of large-scale background variations of the engineered structure.To reduce computational cost and improve detection of small defects, a useful approach is to divide the waveform tomography procedure into two steps: first, a low-frequency model-building step aimed at recovering background structure using FWI, and second, a high-frequency imaging step targeting defects using RTM. Through synthetic test cases, we show that the two-step procedure appears more promising in most cases than a single-step inversion. In particular, we find that the new workflow succeeds in the challenging scenario where the defect lies along preexisting layer interface in a composite bridge deck and in related experiments involving noisy data or inaccurate source parameters. The results reveal the potential of the new wavefield imaging method and encourage further developments in data processing, enhancing computation power, and optimizing the imaging workflow itself so that the procedure can efficiently be applied to geometrically complex 3D solids and waveguides. Lastly, owing to the scale invariance of the elastic wave equation, this imaging procedure can be transferred to applications in regional scales as well.

77 FR 14571 - Waste Regulation

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-12

.... FOR FURTHER INFORMATION CONTACT: Polly A. Penhale, Environmental Officer, at the above address or (703... identified as: Lockheed Martin Corporation, Information Systems & Global Solutions (I&GS) Engineering... holder's address to: Lockheed Corporation, Information Systems & Global Solutions (I&GS) Engineering...

Research report: learning styles of biomedical engineering students.

PubMed

Dee, Kay C; Nauman, Eric A; Livesay, Glen A; Rice, Janet

2002-09-01

Examining students' learning styles can yield information useful to the design of learning activities, courses, and curricula. A variety of measures have been used to characterize learning styles, but the literature contains little information specific to biomedical engineering (BMEN) students. We, therefore, utilized Felder's Index of Learning Styles to investigate the learning style preferences of BMEN students at Tulane University. Tulane BMEN students preferred to receive information visually (preferred by 88% of the student sample) rather than verbally, focus on sensory information (55%) instead of intuitive information, process information actively (66%) instead of reflectively, and understand information globally (59%) rather than sequentially. These preferences varied between cohorts (freshman, sophomore, etc.) and a significantly higher percentage of female students preferred active and sensing learning styles. Compared to other engineering student populations, our sample of Tulane BMEN students contained the highest percentage of students preferring the global learning style. Whether this is a general trend for all BMEN students or a trait specific to Tulane engineers requires further investigation. Regardless, this study confirms the existence of a range of learning styles within biomedical engineering students, and provides motivation for instructors to consider how well their teaching style engages multiple learning styles.

77 FR 12884 - Agency Information Collection Activities: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-02

... colleges, universities, K-12 school systems, businesses, informal science organizations and other research... welfare by supporting research and education in all fields of science and engineering.'' NSF has had a... scientists, engineers, and science and engineering educators. NSF funds research and education in most fields...

Does Birth Order and Academic Proficiency Influence Perfectionistic Self-presentation Among Undergraduate Engineering Students? A Descriptive Analysis

PubMed Central

Louis, Preeti Tabitha; Kumar, Navin

2016-01-01

Background: Perfectionism is a multifaceted concept. It had both advantages and disadvantages. Perfectionistic traits have been associated with leadership and very intellectual people. The present study is an attempt to understand if engineering students possess perfectionistic orientation and whether it influences self-efficacy, social connectedness, and achievement motivation. Materials and Methods: The present study adopts a random sampling design to evaluate the presence of perfectionism as a personality trait among undergraduate engineering students (N = 320). Standardized inventories such as Almost Perfect Scale-Revised were administered first to identify perfectionists and second to differentiate the adaptive from the maladaptive perfectionists. Scheduled interviews were conducted with students to obtain information regarding birth order and family functioning. Results: Findings from the study reveal that there were a significant number of maladaptive perfectionists and that they experienced higher levels of personal and societal demands leading to a negative emotional well-being in comparison to the adaptive perfectionists. We also observed that first-born children were more likely to display a perfectionistic self-presentation and from scheduled interviews, we understood that paternal influences were stronger when it came to decision-making and display of conscientiousness. Conclusion: The study draws on important implications for helping students to understand perfectionism and to respond to demands of the family and societal subsystems in a positive and an adaptive manner. PMID:27833225

Requirements for guidelines systems: implementation challenges and lessons from existing software-engineering efforts

PubMed Central

2012-01-01

Background A large body of work in the clinical guidelines field has identified requirements for guideline systems, but there are formidable challenges in translating such requirements into production-quality systems that can be used in routine patient care. Detailed analysis of requirements from an implementation perspective can be useful in helping define sub-requirements to the point where they are implementable. Further, additional requirements emerge as a result of such analysis. During such an analysis, study of examples of existing, software-engineering efforts in non-biomedical fields can provide useful signposts to the implementer of a clinical guideline system. Methods In addition to requirements described by guideline-system authors, comparative reviews of such systems, and publications discussing information needs for guideline systems and clinical decision support systems in general, we have incorporated additional requirements related to production-system robustness and functionality from publications in the business workflow domain, in addition to drawing on our own experience in the development of the Proteus guideline system (http://proteme.org). Results The sub-requirements are discussed by conveniently grouping them into the categories used by the review of Isern and Moreno 2008. We cite previous work under each category and then provide sub-requirements under each category, and provide example of similar work in software-engineering efforts that have addressed a similar problem in a non-biomedical context. Conclusions When analyzing requirements from the implementation viewpoint, knowledge of successes and failures in related software-engineering efforts can guide implementers in the choice of effective design and development strategies. PMID:22405400

Quality analysis of patient information about knee arthroscopy on the World Wide Web.

PubMed

Sambandam, Senthil Nathan; Ramasamy, Vijayaraj; Priyanka, Priyanka; Ilango, Balakrishnan

2007-05-01

This study was designed to ascertain the quality of patient information available on the World Wide Web on the topic of knee arthroscopy. For the purpose of quality analysis, we used a pool of 232 search results obtained from 7 different search engines. We used a modified assessment questionnaire to assess the quality of these Web sites. This questionnaire was developed based on similar studies evaluating Web site quality and includes items on illustrations, accessibility, availability, accountability, and content of the Web site. We also compared results obtained with different search engines and tried to establish the best possible search strategy to attain the most relevant, authentic, and adequate information with minimum time consumption. For this purpose, we first compared 100 search results from the single most commonly used search engine (AltaVista) with the pooled sample containing 20 search results from each of the 7 different search engines. The search engines used were metasearch (Copernic and Mamma), general search (Google, AltaVista, and Yahoo), and health topic-related search engines (MedHunt and Healthfinder). The phrase "knee arthroscopy" was used as the search terminology. Excluding the repetitions, there were 117 Web sites available for quality analysis. These sites were analyzed for accessibility, relevance, authenticity, adequacy, and accountability by use of a specially designed questionnaire. Our analysis showed that most of the sites providing patient information on knee arthroscopy contained outdated information, were inadequate, and were not accountable. Only 16 sites were found to be providing reasonably good patient information and hence can be recommended to patients. Understandably, most of these sites were from nonprofit organizations and educational institutions. Furthermore, our study revealed that using multiple search engines increases patients' chances of obtaining more relevant information rather than using a single search engine. Our study shows the difficulties encountered by patients in obtaining information regarding knee arthroscopy and highlights the duty of knee surgeons in helping patients to identify the relevant and authentic information in the most efficient manner from the World Wide Web. This study highlights the importance of the role of orthopaedic surgeons in helping their patients to identify the best possible information on the World Wide Web.

Science, Technology, Engineering and Math (STEM) Academic Librarian Positions during 2013: What Carnegie Classifications Reveal about Desired STEM Skills

ERIC Educational Resources Information Center

Trei, Kelli

2015-01-01

This study analyzes the requirements and preferences of 171 science, technology, engineering, and math (STEM) academic librarian positions in the United States as advertised in 2013. This analysis compares the STEM background experience preferences with the Carnegie rankings of the employing institution. The research examines the extent to which…

ETR HEAT EXCHANGER BUILDING, TRA644. EAST SIDE. CAMERA FACING WEST. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ETR HEAT EXCHANGER BUILDING, TRA-644. EAST SIDE. CAMERA FACING WEST. NOTE COURSE OF PIPE FROM GROUND AND FOLLOWING ROOF OF BUILDING. MTR BUILDING IN BACKGROUND AT RIGHT EDGE OF VIEW. INL NEGATIVE NO. HD46-36-3. Mike Crane, Photographer, 4/2005 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Volunteer Expert Readers: Drawing on the University Community to Provide Professional Feedback for Engineering Student Writers

ERIC Educational Resources Information Center

Moskovitz, Cary

2017-01-01

This paper reports on a 3-year study utilizing a novel approach to providing students in an introductory engineering course with feedback on drafts of course writing projects. In the Volunteer Expert Reader (VER) approach, students are matched with university alumni or employees who have the background to give feedback from the perspective of the…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Skibo, A.

SRNL has considerable experience in designing, engineering, and operating systems for removing iodine-129 (I-129) and ruthenium-106 (Ru-106) from waste streams that are directly analogous to the Advanced Liquid Processing System (ALPS) waste streams. SRNL proposes to provide the technical background and design and engineering support for an improved I-129 and Ru-106 removal system for application to ALPS on the Fukushima Daiichi Nuclear Power Station (NPS).

Mixing in Shear Coaxial Jets with and without Acoustics

DTIC Science & Technology

2012-03-29

Distribution Unlimited Combustion Instability Lab - Background • Combustion instability is an unsustainable growth of pressure and heat transfer ...beyond liquid, gas states. Shear coaxial injectors are a common choice for cryogenic liquid rocket engines. Interactions of transverse acoustics with...and combustion beyond liquid, gas states • Shear coaxial injectors are a common choice for cryogenic liquid rocket engines • Interactions of

Dezhurov removes the docking probe in Zvezda during Expedition Three

NASA Image and Video Library

2001-09-17

ISS003-E-5621 (17 September 2001) --- Cosmonaut Vladimir Dezhurov, Expedition Three flight engineer, prepares to remove the docking probe in the Zvezda Service Module's pressurized adapter. The docking probe successfully guided the arrival of the Russian-built Pirs docking compartment to the International Space Station (ISS). Mikhail Tyurin, flight engineer, is visible in the background. Tyurin and Dezhurov represent Rosaviakosmos.

Supporting Integrated STEM in the Elementary Classroom: A Professional Development Approach Centered on an Engineering Design Challenge

ERIC Educational Resources Information Center

Estapa, Anne T.; Tank, Kristina M.

2017-01-01

Background: Science, technology, engineering, and mathematics (STEM) education is becoming more prevalent at the elementary level, and there has been a push to focus on the integration between the STEM disciplines. Researchers within this study sought to understand the extent to which triads composed of a classroom teacher, student teacher, and an…

Fire Support Team Experiment.

DTIC Science & Technology

1984-12-01

December 1984 APPROVED FOR PUBUC RELEASE; DISTRIBUTION UNLIMITED. U_ US ARMY *’ HUMAN ENGINEERING LABORATORY US ARMY BALLISTIC RESEARCH LABORATORY ABERDEEN...INTRODUCTION A. Background In March 1982, the HELBAT ( Human Engineering Laboratory Battalion Artillery Test) Executive Committee agreed that the Ballistic...tactical equipment and its -. human operators. FOSCE mimicked the actions of the platoon forward observers that work for the FIST HQ while the FDS

NSF announces diversity programme

NASA Astrophysics Data System (ADS)

Kruesi, Liz

2016-04-01

The US National Science Foundation (NSF) has initiated a new funding programme that will create schemes to increase diversity in science, technology, engineering and mathematics (STEM). The initiative - Inclusion across the Nation of Communities of Learners of Underrepresented Discoverers in Engineering and Science (INCLUDES) - aims to increase the participation of women, those with a low socioeconomic status, people with disabilities and those from minority racial backgrounds.

Lessons for the Future: Minorities in Math, Science, and Engineering at Community Colleges. [Report of a Roundtable (Washington, D.C., August 13-14, 1992).

ERIC Educational Resources Information Center

Jones, Enid B., Ed.

Background papers and recommendations from the American Association of Community Colleges' (AACC's) 1992 roundtable on issues facing minority students in mathematics, science, and engineering (MSE) education are presented. The first paper, "Community College Networks," by Wm. Carroll Marsalis and Glenna A. Mosby, describes the Tennessee Valley…

Teaching Habitat and Animal Classification to Fourth Graders Using an Engineering-Design Model

ERIC Educational Resources Information Center

Marulcu, Ismail

2014-01-01

Background: The motivation for this work is built upon the premise that there is a need for research-based materials for design-based science instruction. In this paper, a small portion of our work investigating the impact of a LEGO[TM] engineering unit on fourth grade students' preconceptions and understanding of animals is presented. Purpose:…

Knowledge-based personalized search engine for the Web-based Human Musculoskeletal System Resources (HMSR) in biomechanics.

PubMed

Dao, Tien Tuan; Hoang, Tuan Nha; Ta, Xuan Hien; Tho, Marie Christine Ho Ba

2013-02-01

Human musculoskeletal system resources of the human body are valuable for the learning and medical purposes. Internet-based information from conventional search engines such as Google or Yahoo cannot response to the need of useful, accurate, reliable and good-quality human musculoskeletal resources related to medical processes, pathological knowledge and practical expertise. In this present work, an advanced knowledge-based personalized search engine was developed. Our search engine was based on a client-server multi-layer multi-agent architecture and the principle of semantic web services to acquire dynamically accurate and reliable HMSR information by a semantic processing and visualization approach. A security-enhanced mechanism was applied to protect the medical information. A multi-agent crawler was implemented to develop a content-based database of HMSR information. A new semantic-based PageRank score with related mathematical formulas were also defined and implemented. As the results, semantic web service descriptions were presented in OWL, WSDL and OWL-S formats. Operational scenarios with related web-based interfaces for personal computers and mobile devices were presented and analyzed. Functional comparison between our knowledge-based search engine, a conventional search engine and a semantic search engine showed the originality and the robustness of our knowledge-based personalized search engine. In fact, our knowledge-based personalized search engine allows different users such as orthopedic patient and experts or healthcare system managers or medical students to access remotely into useful, accurate, reliable and good-quality HMSR information for their learning and medical purposes. Copyright © 2012 Elsevier Inc. All rights reserved.

Working on the Boundaries: Philosophies and Practices of the Design Process

NASA Technical Reports Server (NTRS)

Ryan, R.; Blair, J.; Townsend, J.; Verderaime, V.

1996-01-01

While systems engineering process is a program formal management technique and contractually binding, the design process is the informal practice of achieving the design project requirements throughout all design phases of the systems engineering process. The design process and organization are systems and component dependent. Informal reviews include technical information meetings and concurrent engineering sessions, and formal technical discipline reviews are conducted through the systems engineering process. This paper discusses and references major philosophical principles in the design process, identifies its role in interacting systems and disciplines analyses and integrations, and illustrates the process application in experienced aerostructural designs.

Datasets on demographic trends in enrollment into undergraduate engineering programs at Covenant University, Nigeria.

PubMed

Popoola, Segun I; Atayero, Aderemi A; Badejo, Joke A; Odukoya, Jonathan A; Omole, David O; Ajayi, Priscilla

2018-06-01

In this data article, we present and analyze the demographic data of undergraduates admitted into engineering programs at Covenant University, Nigeria. The population distribution of 2649 candidates admitted into Chemical Engineering, Civil Engineering, Computer Engineering, Electrical and Electronics Engineering, Information and Communication Engineering, Mechanical Engineering, and Petroleum Engineering programs between 2002 and 2009 are analyzed by gender, age, and state of origin. The data provided in this data article were retrieved from the student bio-data submitted to the Department of Admissions and Student Records (DASR) and Center for Systems and Information Services (CSIS) by the candidates during the application process into the various engineering undergraduate programs. These vital information is made publicly available, after proper data anonymization, to facilitate empirical research in the emerging field of demographics analytics in higher education. A Microsoft Excel spreadsheet file is attached to this data article and the data is thoroughly described for easy reuse. Descriptive statistics and frequency distributions of the demographic data are presented in tables, plots, graphs, and charts. Unrestricted access to these demographic data will facilitate reliable and evidence-based research findings for sustainable education in developing countries.

40 CFR 86.884-10 - Information.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 20 2013-07-01 2013-07-01 false Information. 86.884-10 Section 86.884... New Diesel Heavy-Duty Engines; Smoke Exhaust Test Procedure § 86.884-10 Information. The following information, as applicable, shall be recorded for each test: (a) Engine description and specifications. A copy...

40 CFR 86.884-10 - Information.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 19 2011-07-01 2011-07-01 false Information. 86.884-10 Section 86.884... New Diesel Heavy-Duty Engines; Smoke Exhaust Test Procedure § 86.884-10 Information. The following information, as applicable, shall be recorded for each test: (a) Engine description and specifications. A copy...

40 CFR 86.884-10 - Information.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 20 2012-07-01 2012-07-01 false Information. 86.884-10 Section 86.884... New Diesel Heavy-Duty Engines; Smoke Exhaust Test Procedure § 86.884-10 Information. The following information, as applicable, shall be recorded for each test: (a) Engine description and specifications. A copy...

40 CFR 86.884-10 - Information.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Information. 86.884-10 Section 86.884... New Diesel Heavy-Duty Engines; Smoke Exhaust Test Procedure § 86.884-10 Information. The following information, as applicable, shall be recorded for each test: (a) Engine description and specifications. A copy...

A DIRECTORY OF INFORMATION RESOURCES IN THE UNITED STATES. PHYSICAL SCIENCES, BIOLOGICAL SCIENCES, ENGINEERING.

ERIC Educational Resources Information Center

Library of Congress, Washington, DC.

SOURCES OF INFORMATION FOR BIOLOGICAL AND PHYSICAL SCIENCE AND ENGINEERING ARE LISTED. THEY INCLUDE--(1) LIBRARIES, (2) CENTRALIZED INFORMATION CENTERS, (3) PROFESSIONAL SOCIETIES AND OTHER SPECIALIZING ORGANIZATIONS, (4) INDUSTRIAL FIRMS, (5) GOVERNMENTAL AGENCIES OR OFFICES, AND (6) OTHER INFORMATION SOURCES WHICH MAKE SCIENTIFIC AND…

AP233: An Information Model for Systems Engineering

NASA Technical Reports Server (NTRS)

Siebes, Georg

2009-01-01

In today's world, information is abundant. We have no problems generating it. But we are challenged to find, organize, and exchange information. center dot A standardized model of information can help. Such a model nearly completed its development for Systems Engineering. It is referred to as AP233 (AP = Application Protocol).

A Management Information System for Bare Base Civil Engineering Commanders

DTIC Science & Technology

1988-09-01

initial beddown stage. The purpose of this research was to determine the feasibility of developing a microcomputer based management information system (MIS...the software best suited to synthesize four of the categories into a prototype field MIS. Keyword: Management information system , Bare bases, Civil engineering, Data bases, Information retrieval.

Identification of informative features for predicting proinflammatory potentials of engine exhausts.

PubMed

Wang, Chia-Chi; Lin, Ying-Chi; Lin, Yuan-Chung; Jhang, Syu-Ruei; Tung, Chun-Wei

2017-08-18

The immunotoxicity of engine exhausts is of high concern to human health due to the increasing prevalence of immune-related diseases. However, the evaluation of immunotoxicity of engine exhausts is currently based on expensive and time-consuming experiments. It is desirable to develop efficient methods for immunotoxicity assessment. To accelerate the development of safe alternative fuels, this study proposed a computational method for identifying informative features for predicting proinflammatory potentials of engine exhausts. A principal component regression (PCR) algorithm was applied to develop prediction models. The informative features were identified by a sequential backward feature elimination (SBFE) algorithm. A total of 19 informative chemical and biological features were successfully identified by SBFE algorithm. The informative features were utilized to develop a computational method named FS-CBM for predicting proinflammatory potentials of engine exhausts. FS-CBM model achieved a high performance with correlation coefficient values of 0.997 and 0.943 obtained from training and independent test sets, respectively. The FS-CBM model was developed for predicting proinflammatory potentials of engine exhausts with a large improvement on prediction performance compared with our previous CBM model. The proposed method could be further applied to construct models for bioactivities of mixtures.

77 FR 32700 - Agency Information Collection Activities; Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-01

... provide national estimates on the science and engineering workforce and changes in their employment... characteristics of the nation's science and engineering population. The 2013 NSCG will provide necessary input... of data on scientific and engineering resources, and to provide a source of information for policy...

49 CFR 232.109 - Dynamic brake requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Except as provided in paragraph (i) of this section, a locomotive engineer shall be informed of the... train and at other locations where a locomotive engineer first begins operation of a train. The information required by this paragraph may be provided to the locomotive engineer by any means determined to...

49 CFR 232.109 - Dynamic brake requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Except as provided in paragraph (i) of this section, a locomotive engineer shall be informed of the... train and at other locations where a locomotive engineer first begins operation of a train. The information required by this paragraph may be provided to the locomotive engineer by any means determined to...

49 CFR 232.109 - Dynamic brake requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Except as provided in paragraph (i) of this section, a locomotive engineer shall be informed of the... train and at other locations where a locomotive engineer first begins operation of a train. The information required by this paragraph may be provided to the locomotive engineer by any means determined to...

Putting Google Scholar to the Test: A Preliminary Study

ERIC Educational Resources Information Center

Robinson, Mary L.; Wusteman, Judith

2007-01-01

Purpose: To describe a small-scale quantitative evaluation of the scholarly information search engine, Google Scholar. Design/methodology/approach: Google Scholar's ability to retrieve scholarly information was compared to that of three popular search engines: Ask.com, Google and Yahoo! Test queries were presented to all four search engines and…

Generalized Information Architecture for Managing Requirements in IBM?s Rational DOORS(r) Application.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aragon, Kathryn M.; Eaton, Shelley M.; McCornack, Marjorie Turner

When a requirements engineering effort fails to meet expectations, often times the requirements management tool is blamed. Working with numerous project teams at Sandia National Laboratories over the last fifteen years has shown us that the tool is rarely the culprit; usually it is the lack of a viable information architecture with well- designed processes to support requirements engineering. This document illustrates design concepts with rationale, as well as a proven information architecture to structure and manage information in support of requirements engineering activities for any size or type of project. This generalized information architecture is specific to IBM's Rationalmore » DOORS (Dynamic Object Oriented Requirements System) software application, which is the requirements management tool in Sandia's CEE (Common Engineering Environment). This generalized information architecture can be used as presented or as a foundation for designing a tailored information architecture for project-specific needs. It may also be tailored for another software tool. Version 1.0 4 November 201« less

Combinatorial Fusion Analysis for Meta Search Information Retrieval

NASA Astrophysics Data System (ADS)

Hsu, D. Frank; Taksa, Isak

Leading commercial search engines are built as single event systems. In response to a particular search query, the search engine returns a single list of ranked search results. To find more relevant results the user must frequently try several other search engines. A meta search engine was developed to enhance the process of multi-engine querying. The meta search engine queries several engines at the same time and fuses individual engine results into a single search results list. The fusion of multiple search results has been shown (mostly experimentally) to be highly effective. However, the question of why and how the fusion should be done still remains largely unanswered. In this chapter, we utilize the combinatorial fusion analysis proposed by Hsu et al. to analyze combination and fusion of multiple sources of information. A rank/score function is used in the design and analysis of our framework. The framework provides a better understanding of the fusion phenomenon in information retrieval. For example, to improve the performance of the combined multiple scoring systems, it is necessary that each of the individual scoring systems has relatively high performance and the individual scoring systems are diverse. Additionally, we illustrate various applications of the framework using two examples from the information retrieval domain.

Engineering Lessons Learned and Systems Engineering Applications

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.

2005-01-01

Systems Engineering is fundamental to good engineering, which in turn depends on the integration and application of engineering lessons learned. Thus, good Systems Engineering also depends on systems engineering lessons learned from within the aerospace industry being documented and applied. About ten percent of the engineering lessons learned documented in the NASA Lessons Learned Information System are directly related to Systems Engineering. A key issue associated with lessons learned datasets is the communication and incorporation of this information into engineering processes. As part of the NASA Technical Standards Program activities, engineering lessons learned datasets have been identified from a number of sources. These are being searched and screened for those having a relation to Technical Standards. This paper will address some of these Systems Engineering Lessons Learned and how they are being related to Technical Standards within the NASA Technical Standards Program, including linking to the Agency's Interactive Engineering Discipline Training Courses and the life cycle for a flight vehicle development program.

Effects of Demographic Characteristics, Educational Background, and Supporting Factors on ICT Readiness of Technical and Vocational Teachers in Malaysia

ERIC Educational Resources Information Center

Alazzam, Abu-Obaideh; Bakar, Ab Rahim; Hamzah, Ramlah; Asimiran, S.

2012-01-01

The aim of this study was to examine ICT readiness and the effects of demographic characteristics, educational background, and support factors on the ICT readiness of technical and vocational teachers in Malaysia. The questionnaire was administered to 329 technical and vocational teachers who are teaching engineering subjects in Malaysian…

Learning Style Preferences: An Examination of Differences amongst Students with Different Disciplinary Backgrounds

ERIC Educational Resources Information Center

Hill, Frances; Tomkinson, Bland; Hiley, Anna; Dobson, Helen

2016-01-01

The context of this study is of students with backgrounds in a variety of engineering and social science disciplines, and from first degrees in different countries, coming together to study Project Management. Tailoring teaching to all individuals' learning styles is not possible, but, in an attempt to learn how to teach better in ways that fit…

Inequalities in Students' Choice of STEM Subjects: An Exploration of Intersectional Relationships. CLS Working Paper 2015/6

ERIC Educational Resources Information Center

Codiroli, Natasha

2015-01-01

The relative lack of students studying post-compulsory STEM (Science, Technology, Engineering and Mathematics) subjects is a key policy concern. A particular issue is the disparities in uptake by students' family background, gender and ethnicity. It remains unclear whether the effects of family background can be explained by academic disparities,…

Initial Assessment of Acoustic Source Visibility with a 24-Element Microphone Array in the Arnold Engineering Development Center 80- by 120-Foot Wind Tunnel at NASA Ames Research Center

NASA Technical Reports Server (NTRS)

Horne, William C.

2011-01-01

Measurements of background noise were recently obtained with a 24-element phased microphone array in the test section of the Arnold Engineering Development Center 80- by120-Foot Wind Tunnel at speeds of 50 to 100 knots (27.5 to 51.4 m/s). The array was mounted in an aerodynamic fairing positioned with array center 1.2m from the floor and 16 m from the tunnel centerline, The array plate was mounted flush with the fairing surface as well as recessed in. (1.27 cm) behind a porous Kevlar screen. Wind-off speaker measurements were also acquired every 15 on a 10 m semicircular arc to assess directional resolution of the array with various processing algorithms, and to estimate minimum detectable source strengths for future wind tunnel aeroacoustic studies. The dominant background noise of the facility is from the six drive fans downstream of the test section and first set of turning vanes. Directional array response and processing methods such as background-noise cross-spectral-matrix subtraction suggest that sources 10-15 dB weaker than the background can be detected.

Quality of human-computer interaction - results of a national usability survey of hospital-IT in Germany

PubMed Central

2011-01-01

Background Due to the increasing functionality of medical information systems, it is hard to imagine day to day work in hospitals without IT support. Therefore, the design of dialogues between humans and information systems is one of the most important issues to be addressed in health care. This survey presents an analysis of the current quality level of human-computer interaction of healthcare-IT in German hospitals, focused on the users' point of view. Methods To evaluate the usability of clinical-IT according to the design principles of EN ISO 9241-10 the IsoMetrics Inventory, an assessment tool, was used. The focus of this paper has been put on suitability for task, training effort and conformity with user expectations, differentiated by information systems. Effectiveness has been evaluated with the focus on interoperability and functionality of different IT systems. Results 4521 persons from 371 hospitals visited the start page of the study, while 1003 persons from 158 hospitals completed the questionnaire. The results show relevant variations between different information systems. Conclusions Specialised information systems with defined functionality received better assessments than clinical information systems in general. This could be attributed to the improved customisation of these specialised systems for specific working environments. The results can be used as reference data for evaluation and benchmarking of human computer engineering in clinical health IT context for future studies. PMID:22070880

Cyber-Informed Engineering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Robert S.; Benjamin, Jacob; Wright, Virginia L.

A continuing challenge for engineers who utilize digital systems is to understand the impact of cyber-attacks across the entire product and program lifecycle. This is a challenge due to the evolving nature of cyber threats that may impact the design, development, deployment, and operational phases of all systems. Cyber Informed Engineering is the process by which engineers are made aware of both how to use their engineering knowledge to positively impact the cyber security in the processes by which they architect and design components and the services and security of the components themselves.

40 CFR 1039.140 - What is my engine's maximum engine power?

Code of Federal Regulations, 2014 CFR

2014-07-01

...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES... 1065, based on the manufacturer's design and production specifications for the engine. This information... power values for an engine are based on maximum engine power. For example, the group of engines with...

40 CFR 1039.140 - What is my engine's maximum engine power?

Code of Federal Regulations, 2011 CFR

2011-07-01

...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES... 1065, based on the manufacturer's design and production specifications for the engine. This information... power values for an engine are based on maximum engine power. For example, the group of engines with...

40 CFR 1039.140 - What is my engine's maximum engine power?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES... 1065, based on the manufacturer's design and production specifications for the engine. This information... power values for an engine are based on maximum engine power. For example, the group of engines with...

40 CFR 1039.140 - What is my engine's maximum engine power?

Code of Federal Regulations, 2012 CFR

2012-07-01

...) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD COMPRESSION-IGNITION ENGINES... 1065, based on the manufacturer's design and production specifications for the engine. This information... power values for an engine are based on maximum engine power. For example, the group of engines with...

Exploring Malaysian Trainee Teachers' Adoption of the Internet as Information Tool

ERIC Educational Resources Information Center

Teck-Chai, Lau; Kim-Hong, Yeoh; Ching-Ching, Choong

2010-01-01

This study reports the usage of three commercial Internet search engines in information seeking among trainee teachers at a teacher training institute in Malaysia. It attempts to investigate the information seeking behavior of the trainees via three Internet search engines (Google, Yahoo and MSN) as gateways to information for research in academic…