Students' Changing Images of Engineering and Engineers. Research Brief

ERIC Educational Resources Information Center

Jocuns, Andrew; Stevens, Reed; Garrison, Lari; Amos, Daniel

2008-01-01

This study analyzes the images of engineers and engineering that students construct over the course of their undergraduate engineering educations. Students in their first year of study to become engineers knew very little about the work they would be doing as an engineer and their expectations were more specific, hopeful, and high status than…

Progreen Online Engineering Diploma in the Middle East: Assessment of the Educational Experience

ERIC Educational Resources Information Center

Baytiyeh, Hoda

2018-01-01

Little is known about the status of online learning in the Middle East. This study investigates educational experiences of engineers enrolled in the new joint online ProGreen diploma programme offered by three universities, two in Lebanon and one in Egypt. Forty-eight working engineers responded to an online survey based on the three components of…

The Study of Technology as a Field of Knowledge in General Education: Historical Insights and Methodological Considerations from a Swedish Case Study, 1842-2010

ERIC Educational Resources Information Center

Hallström, Jonas; Hultén, Magnus; Lövheim, Daniel

2014-01-01

Today, technology education in Sweden is both a high-status and a low-status phenomenon. Positive values such as economic growth, global competitiveness and the sustainability of the welfare state are often coupled with higher engineering education and sometimes even upper secondary education. Negative values, on the other hand, are often…

U.S. Nuclear Engineering Education: Status and Prospects.

ERIC Educational Resources Information Center

National Academy of Sciences - National Research Council, Washington, DC. Commission on Engineering and Technical Systems.

This study examines the status of and outlook for nuclear engineering (NE) in the United States. The study resulted from a concern about the downward trends in student enrollments in NE, in both graduate and undergraduate programs. Concerns have also been expressed about the declining number of U.S. university NE departments and programs, the…

Think Engineer, Think Male?

ERIC Educational Resources Information Center

Male, Sally A.; Bush, Mark B.; Murray, Kevin

2009-01-01

Engineering education needs to develop the competencies required for engineering work, and attract and retain students from diverse backgrounds. This study investigated the possibility that the perceived importance of competencies is subconsciously influenced by gendered assumptions, and as a consequence, this lowers the status given to…

Examining the Relationship between Technology & Engineering Instruction and Technology & Engineering Literacy in K-8 Education

ERIC Educational Resources Information Center

Mitchell, Tamarra L.

2017-01-01

The purpose of this study was to examine the relationship between technology and engineering instruction and technology and engineering literacy in grades K-8. The factors identified and used for the purpose of this study were gender, socioeconomic status, race/ethnicity, and important modes of technology and engineering instruction. These factors…

Comparison of China-US Engineering Ethics Educations in Sino-Western Philosophies of Technology.

PubMed

Cao, Gui Hong

2015-12-01

Ethics education has become essential in modern engineering. Ethics education in engineering has been increasingly implemented worldwide. It can improve ethical behaviors in technology and engineering design under the guidance of the philosophy of technology. Hence, this study aims to compare China-US engineering ethics education in Sino-Western philosophies of technology by using literature studies, online surveys, observational researches, textual analyses, and comparative methods. In my original theoretical framework and model of input and output for education, six primary variables emerge in the pedagogy: disciplinary statuses, educational goals, instructional contents, didactic models, teaching methods, and edificatory effects. I focus on the similarities and differences of engineering ethics educations between China and the U.S. in Chinese and Western philosophies of technology. In the field of engineering, the U.S. tends toward applied ethics training, whereas China inclines toward practical moral education. The U.S. is the leader, particularly in the amount of money invested and engineering results. China has quickened its pace, focusing specifically on engineering labor input and output. Engineering ethics is a multiplayer game effected at various levels among (a) lower level technicians and engineers, engineering associations, and stockholders; (b) middle ranking engineering ethics education, the ministry of education, the academy of engineering, and the philosophy of technology; and (c) top national and international technological policies. I propose that professional engineering ethics education can play many important roles in reforming engineering social responsibility by international cooperation in societies that are becoming increasingly reliant on engineered devices and systems. Significantly, my proposals contribute to improving engineering ethics education and better-solving engineering ethics issues, thereby maximizing engineering sustainability.

Genetically Engineered Food Right-to-Know Act

THOMAS, 113th Congress

Sen. Boxer, Barbara [D-CA

2013-04-24

Senate - 04/24/2013 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Current Status of Engineering Education in America

NASA Astrophysics Data System (ADS)

Barr, Ronald E.

Many faculty believe that engineering education in America is at a crossroads and much change is needed. International competition in engineering and the global economy have major potential impact on the engineering workforce of the future. We must find ways to educate U.S. engineers to be competitive and creative contributors in the worldwide arena. Recent national reports are sounding the alarm that the U.S. is losing it leadership in technology and innovation, with consequences for economic prosperity and national security. The report Rising Above the Gathering Storm discusses this dilemma in detail and offers four recommendations to U.S. policymakers. The report Educating the Engineer of 2020 discusses new ways to prepare American engineers for the 21st Century. Furthermore, changes in ABET accreditation, along with new paradigms of teaching and new technology in the classroom, are changing the scholarship of engineering education. We must find ways to promote change in engineering faculty for this new opportunity in engineering educational scholarship. Future engineering students are now in K-12, which is becoming an increasingly diverse population that in the past has not been fully represented in engineering education. Current trends show disaffection for pursuing studies in science and engineering in the youth of our U.S. society. We must find new ways to portray engineering as an exciting and rewarding career, and certainly as an educational platform for professional careers beyond the baccalaureate degree.

The Impact of Design-Based STEM Integration Curricula on Student Achievement in Engineering, Science, and Mathematics

NASA Astrophysics Data System (ADS)

Selcen Guzey, S.; Harwell, Michael; Moreno, Mario; Peralta, Yadira; Moore, Tamara J.

2017-04-01

The new science education reform documents call for integration of engineering into K-12 science classes. Engineering design and practices are new to most science teachers, meaning that implementing effective engineering instruction is likely to be challenging. This quasi-experimental study explored the influence of teacher-developed, engineering design-based science curriculum units on learning and achievement among grade 4-8 students of different races, gender, special education status, and limited English proficiency (LEP) status. Treatment and control students ( n = 4450) completed pretest and posttest assessments in science, engineering, and mathematics as well as a state-mandated mathematics test. Single-level regression results for science outcomes favored the treatment for one science assessment (physical science, heat transfer), but multilevel analyses showed no significant treatment effect. We also found that engineering integration had different effects across race and gender and that teacher gender can reduce or exacerbate the gap in engineering achievement for student subgroups depending on the outcome. Other teacher factors such as the quality of engineering-focused science units and engineering instruction were predictive of student achievement in engineering. Implications for practice are discussed.

Reliability, Maintenance and Risk Assessment in Naval Architecture and Marine Engineering Education in the US.

ERIC Educational Resources Information Center

Inozu, Bahadir; Ayyub, Bilal A.

1999-01-01

Examines the current status of existing curricula, accreditation requirements, and new developments in Naval Architecture and Marine Engineering education in the United States. Discusses the emerging needs of the maritime industry in light of advances in information technology and movement toward risk-based, reliability-centered rule making in the…

Mechatronics Engineering Education in India

ERIC Educational Resources Information Center

Bajpai, Shrish; Khare, Sushant

2015-01-01

Present paper aims to give an insight in the field of Mechatronics, specifically its standard of education in India. We have investigated this field right from its origin. We have analyzed how it expanded as a proper discipline of engineering and in which direction the development in this field is going now and, at the same time, its status of…

The Status and Future of Aerospace Engineering Education in Turkey.

ERIC Educational Resources Information Center

Hale, Francis J.

There is no aerospace industry in Turkey, and the level of operational activity is low even though the potential for the exploitation of aviation is high. The government of Turkey hopes to establish an aircraft factory in conjunction with a foreign contractor and is aware of the need for aerospace engineering education. This paper describes the…

Status of Elementary Teacher Development: Preparing Elementary Teachers to Deliver Technology and Engineering Experiences

ERIC Educational Resources Information Center

Rose, Mary Annette; Carter, Vinson; Brown, Josh; Shumway, Steven

2017-01-01

For over a century, teacher preparation programs (TPPs) have experienced peaks and valleys in preparing preservice teachers to deliver technology and engineering (TE) experiences in elementary classrooms. Calls to integrate engineering concepts into elementary education (Katehi, Pearson, & Feder, 2009; Kimmel, Carpinelli, Curr-Alexander, &…

Failures and Reform in Mathematics Education: The Case of Engineering. National Institute Briefing Note No. 5.

ERIC Educational Resources Information Center

Wolf, Alison

The structure of education for 16- to 18-year-olds in Great Britain discourages them from making mathematics, science, and engineering serious options for future study. The emerging structure of the labor market, in which a large proportion of high-status jobs do not require higher mathematics, increases the numbers who decide not to commit…

Undergraduate Scholarship Awards in Science, Technology, Engineering, or Mathematics Act

THOMAS, 111th Congress

Sen. Gillibrand, Kirsten E. [D-NY

2010-09-23

Senate - 09/23/2010 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Standardized Metadata for Education: A Status Report.

ERIC Educational Resources Information Center

Duval, Erik

This paper starts with a brief background to worldwide standardization activities in the field of educational technologies, and identifies three important accredited standardization organizations in the domain of education and training: the Institute of Electrical and Electronics Engineers (IEEE) Learning Technology Standardization Committee…

Environmental engineering education at Ghent University, Flanders (Belgium).

PubMed

Demeestere, K; Dewulf, J; Janssen, C; Van Langenhove, H

2004-01-01

Since the 1980s, environmental engineering education has been a rapidly growing discipline in many universities. This paper discusses the history, the current status and the near future of environmental engineering education at Ghent University. This university, with about 50% of the Flemish university environmental engineering students, can be considered as representative for the situation in Flanders, Belgium. In contrast to many other universities, environmental engineering education at Ghent University does not have its historical roots in civil engineering, but has been developed from the curricula organized by the former Faculty of Agricultural Sciences. As part of a reorganisation of the education and research activities at this faculty, a curriculum leading to the degree of "bio-engineer in environmental technology" was established in 1991. This curriculum covers a 5-year study and is constructed around 8 main components. Exchange of students with other European universities, e.g. within the Socrates framework, has become a prominent aspect of student life and education. This paper also briefly describes the employment opportunities of graduated bio-engineers in environmental technology. Finally, the current implementation of the bachelor's-master's structure, leading to a "master of science in environmental technology" degree is summarized.

The Current Status of STEM Education Research

ERIC Educational Resources Information Center

Brown, Josh

2012-01-01

This paper explores the current Science, Technology, Engineering and Mathematics (STEM) education research base through an analysis of articles from eight journals focused on the STEM disciplines. Analyzed are both practitioner and research publications to determine the current scope of STEM education research, where current STEM education…

A Descriptive Analysis of Programs and Trends in Engineering Education for Ethnic Minority Students: A Report to the Field.

ERIC Educational Resources Information Center

Gordon, Edmund W.; And Others

This report presents the findings of an evaluative study of the current status of engineering education for minority students at the collegiate and pre-collegiate levels in the United States. It is based on a survey of 50 existing programs and a review of the professional and research literature in this field. The major findings of the analysis…

A bill to amend title 38, United States Code, to provide additional educational assistance under Post-9/11 Educational Assistance to veterans pursuing a degree in science, technology, engineering, math, or an area that leads to employment in a high-demand occupation, and for other purposes.

THOMAS, 113th Congress

Sen. Brown, Sherrod [D-OH

2013-03-11

Senate - 06/12/2013 Committee on Veterans' Affairs. Hearings held. Hearings printed: S.Hrg. 113-111. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Women Scientists and Engineers: Trends in Participation.

ERIC Educational Resources Information Center

Vetter, Betty M.

1981-01-01

Examines trends in participation of women in science and engineering over the past decade and estimates changes during the 1980s. Focuses on educational attainment, employment status and sector, and salaries, and indicates a gap in salaries and career opportunities between men and women. (JN)

A bill to amend the Federal Food, Drug, and Cosmetic Act to require labeling of genetically engineered fish.

THOMAS, 113th Congress

Sen. Begich, Mark [D-AK

2013-02-07

Senate - 02/07/2013 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

A bill to amend the Federal Food, Drug, and Cosmetic Act to prevent the approval of genetically-engineered fish.

THOMAS, 111th Congress

Sen. Begich, Mark [D-AK

2010-11-18

Senate - 11/18/2010 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

A bill to amend the Federal Food, Drug, and Cosmetic Act to require labeling of genetically-engineered fish.

THOMAS, 111th Congress

Sen. Begich, Mark [D-AK

2010-11-18

Senate - 11/18/2010 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

A bill to amend the Federal Food, Drug, and Cosmetic Act to prevent the approval of genetically-engineered fish.

THOMAS, 112th Congress

Sen. Begich, Mark [D-AK

2011-01-31

Senate - 01/31/2011 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

A bill to amend the Federal Food, Drug, and Cosmetic Act to require labeling of genetically-engineered fish.

THOMAS, 112th Congress

Sen. Begich, Mark [D-AK

2011-01-31

Senate - 01/31/2011 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Biomedical engineering education--status and perspectives.

PubMed

Magjarevic, Ratko; Zequera Diaz, Martha L

2014-01-01

Biomedical Engineering programs are present at a large number of universities all over the world with an increasing trend. New generations of biomedical engineers have to face the challenges of health care systems round the world which need a large number of professionals not only to support the present technology in the health care system but to develop new devices and services. Health care stakeholders would like to have innovative solutions directed towards solving problems of the world growing incidence of chronic disease and ageing population. These new solutions have to meet the requirements for continuous monitoring, support or care outside clinical settlements. Presence of these needs can be tracked through data from the Labor Organization in the U.S. showing that biomedical engineering jobs have the largest growth at the engineering labor market with expected 72% growth rate in the period from 2008-2018. In European Union the number of patents (i.e. innovation) is the highest in the category of biomedical technology. Biomedical engineering curricula have to adopt to the new needs and for expectations of the future. In this paper we want to give an overview of engineering professions in related to engineering in medicine and biology and the current status of BME education in some regions, as a base for further discussions.

Continuing Professional Education: Status, Trends, and Issues Related to Electronic Delivery.

ERIC Educational Resources Information Center

Rothenberg, Donna

Continuing professional education for teachers, doctors, lawyers, and engineers is examined in terms of its potential for large-scale electronic technology. For each profession, a profile is provided, and current continuing education programs and use of electronics in each field are described. These include satellite projects, in-house and closed…

Women in Engineering--Beyond Recruitment. Proceedings of the Conference (Cornell University, Ithaca, New York, June 22-25, 1975).

ERIC Educational Resources Information Center

Ott, Mary Diederich, Ed.; Reese, Nancy A., Ed.

This report contains invited papers and comments from a conference on the status and problems of women in engineering. First, a discussion of research reveals that most women choose engineering as a field for college study late in their secondary education, depend heavily on external sources of support, and have attitudes and experiences different…

Beyond Diversity as Usual: Expanding Critical Cultural Approaches to Marginalization in Engineering Education

NASA Astrophysics Data System (ADS)

Secules, Stephen

In general, what we think of as "diversity work" in undergraduate engineering education focuses in the following ways: more on the overlooked assets of minority groups than on the acts of overlooking, more on the experiences of marginalized groups than on the mechanisms of marginalization by dominant groups, more on supporting and increasing minority student retention than on critiquing and remediating the systems which lead minority students to leave engineering. This dissertation presents a series of arguments which push beyond a status quo understanding of diversity in engineering education. The first approach the dissertation takes up is to problematize educational facts around failure by interrogating their roots in interactions and cultural norms in an engineering classroom. In another argument, the dissertation places the engineering classroom cultural norms of competition, whiteness, and masculinity in a critical historical context of the discipline at large. Finally, I demonstrate how engaging students in a critique of marginalizing educational culture can be an important source of agency. In addition to applying and demonstrating the value of specific novel approaches in engineering education, the dissertation contributes to the research community by discussing the respective affordances between these and other possible scholarly approaches to culture and marginalization in education. I also suggest how a consideration of the taken-for-granted culture of engineering education can be an important tool for instructors seeking to gain insight into persistent educational problems. In addition, this dissertation makes implications for diversity support practice, envisioning new forms of support programming rooted in intersectionality and critical praxis.

Education of biomedical engineering in Taiwan.

PubMed

Lin, Kang-Ping; Kao, Tsair; Wang, Jia-Jung; Chen, Mei-Jung; Su, Fong-Chin

2014-01-01

Biomedical Engineers (BME) play an important role in medical and healthcare society. Well educational programs are important to support the healthcare systems including hospitals, long term care organizations, manufacture industries of medical devices/instrumentations/systems, and sales/services companies of medical devices/instrumentations/system. In past 30 more years, biomedical engineering society has accumulated thousands people hold a biomedical engineering degree, and work as a biomedical engineer in Taiwan. Most of BME students can be trained in biomedical engineering departments with at least one of specialties in bioelectronics, bio-information, biomaterials or biomechanics. Students are required to have internship trainings in related institutions out of campus for 320 hours before graduating. Almost all the biomedical engineering departments are certified by IEET (Institute of Engineering Education Taiwan), and met the IEET requirement in which required mathematics and fundamental engineering courses. For BMEs after graduation, Taiwanese Society of Biomedical Engineering (TSBME) provides many continue-learning programs and certificates for all members who expect to hold the certification as a professional credit in his working place. In current status, many engineering departments in university are continuously asked to provide joint programs with BME department to train much better quality students. BME is one of growing fields in Taiwan.

The Current Status of Women Professors in China.

ERIC Educational Resources Information Center

Wu, Haiqing

1992-01-01

Presents statistics on the status of female faculty members in China. Reports that in 1987, women comprised just over nine percent of the faculty. Indicates that women are most prevalent in the medical sciences and agronomy but scarcest in engineering and law. Predicts that more women will enter higher education careers. (SG)

Discipline-Based Education Research: Understanding and Improving Learning in Undergraduate Science and Engineering

ERIC Educational Resources Information Center

Singer, Susan R.; Nielsen, Natalie R.; Schweingruber, Heidi A.

2012-01-01

The National Science Foundation funded a synthesis study on the status, contributions, and future direction of discipline-based education research (DBER) in physics, biological sciences, geosciences, and chemistry. DBER combines knowledge of teaching and learning with deep knowledge of discipline-specific science content. It describes the…

Beyond Science and Math: Integrating Geography Education

ERIC Educational Resources Information Center

Grubbs, Michael E.; Grubbs, Steven

2015-01-01

This article discusses the status of World Geography Education and the importance of these concepts in developing 21st century students. Moreover, the authors also showcase how World Geography concepts can be intentionally taught through a technological/engineering, design-based learning challenge that requires students to solve a global housing…

Progreen online engineering diploma in the Middle East: assessment of the educational experience

NASA Astrophysics Data System (ADS)

Baytiyeh, Hoda

2018-03-01

Little is known about the status of online learning in the Middle East. This study investigates educational experiences of engineers enrolled in the new joint online ProGreen diploma programme offered by three universities, two in Lebanon and one in Egypt. Forty-eight working engineers responded to an online survey based on the three components of the community of inquiry model: social presence, teaching presence, and cognitive presence. Exploratory factor analysis identified five factors: sense of belonging, self-directedness, self-actualisation, interaction, and instructional guidance. The findings showed that sense of belonging was the factor engineers rated highest but it did not correlate with instructional guidance. However, instructional guidance highly correlated with self-directedness and self-actualisation.

Advanced Technology for Engineering Education

NASA Technical Reports Server (NTRS)

Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)

1998-01-01

This document contains the proceedings of the Workshop on Advanced Technology for Engineering Education, held at the Peninsula Graduate Engineering Center, Hampton, Virginia, February 24-25, 1998. The workshop was jointly sponsored by the University of Virginia's Center for Advanced Computational Technology and NASA. Workshop attendees came from NASA, other government agencies, industry and universities. The objectives of the workshop were to assess the status of advanced technologies for engineering education and to explore the possibility of forming a consortium of interested individuals/universities for curriculum reform and development using advanced technologies. The presentations covered novel delivery systems and several implementations of new technologies for engineering education. Certain materials and products are identified in this publication in order to specify adequately the materials and products that were investigated in the research effort. In no case does such identification imply recommendation or endorsement of products by NASA, nor does it imply that the materials and products are the only ones or the best ones available for this purpose. In many cases equivalent materials and products are available and would probably produce equivalent results.

The Status of Women Faculty in Four-Year Aviation Higher Education Programs

ERIC Educational Resources Information Center

Ison, David C.

2008-01-01

The purpose of the study was to evaluate the status of women's participation in full-time, non-engineering aviation baccalaureate programs in the United States. In addition, the involvement of women in academic aviation leadership positions (such as chair, dean, or director) was evaluated. Of 353 full-time aviation faculty members employed at 60…

Space education in the context of U.S. Government multiagency efforts in science and mathematics education

NASA Technical Reports Server (NTRS)

Finarelli, Margaret G.; Brown, Robert W.

1991-01-01

The status of a multiagency endeavor to involve U.S. Federal agencies in the attainment of National Education Goals for the 1990's is presented. Emphasis is placed on the educational activities of NASA, which is one of 16 Federal agencies on the Federal Coordinating Council for Science, Engineering and Technology. NASA's is a prototype education program for achieving excellence in mathematics and science in the coming generations of Americans.

The development of Sustainability Graduate Community (SGC) as a learning pathway for sustainability education - a framework for engineering programmes in Malaysia Technical Universities Network (MTUN)

NASA Astrophysics Data System (ADS)

Johan, Kartina; Mohd Turan, Faiz

2016-11-01

‘Environmental and sustainability’ is one of the Program Outcome (PO) designated by the Board of Engineers Malaysia (BEM) as one of the accreditation program requirement. However, to-date the implementation of sustainability elements in engineering programme in the technical universities in Malaysia is within individual faculty's curriculum plan and lack of university-level structured learning pathway, which enable all students to have access to an education in sustainability across all disciplines. Sustainability Graduate Community (SGC) is a framework designed to provide a learning pathway in the curriculum of engineering programs to inculcate sustainability education among engineering graduates. This paper aims to study the required attributes in Sustainability Graduate Community (SGC) framework to produce graduates who are not just engineers but also skilful in sustainability competencies using Global Project Management (GPM) P5 Standard for Sustainability. The development of the conceptual framework is to provide a constructive teaching and learning plan for educators and policy makers to work on together in developing the Sustainability Graduates (SG), the new kind of graduates from Malaysia Technical Universities Network (MTUN) in Malaysia who are literate in sustainability practices. The framework also support the call for developing holistic students based on Malaysian Education Blueprint (Higher Education) and address the gap between the statuses of engineering qualification to the expected competencies from industries in Malaysia in particular by achieving the SG attributes outlined in the framework

Continuing professional education: Status, trends, and issues related to electronic delivery

NASA Technical Reports Server (NTRS)

Rothenberg, D.

1975-01-01

Four professional groups, teachers, doctors, lawyers, and engineers were examined to determine if they constitute a potential market for continuing professional education via large scale electronic technology. Data were collected in view of social and economic forces, such as mandatory periodic relicensure, additional course requirements for certification, or the economic health of supporting industries.

Software development environments: Status and trends

NASA Technical Reports Server (NTRS)

Duffel, Larry E.

1988-01-01

Currently software engineers are the essential integrating factors tying several components together. The components consist of process, methods, computers, tools, support environments, and software engineers. The engineers today empower the tools versus the tools empowering the engineers. Some of the issues in software engineering are quality, managing the software engineering process, and productivity. A strategy to accomplish this is to promote the evolution of software engineering from an ad hoc, labor intensive activity to a managed, technology supported discipline. This strategy may be implemented by putting the process under management control, adopting appropriate methods, inserting the technology that provides automated support for the process and methods, collecting automated tools into an integrated environment and educating the personnel.

Supporting the goals and ideals of National Engineers Week.

THOMAS, 113th Congress

Rep. Lipinski, Daniel [D-IL-3

2014-02-11

House - 02/11/2014 Referred to the Committee on Science, Space, and Technology, and in addition to the Committee on Education and the Workforce, for a period to be subsequently determined by the Speaker, in each case for consideration of such provisions as fall within the... (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

A resolution commending the participants in the 44th International Chemistry Olympiad and recognizing the importance of education in the fields of science, technology, engineering, and mathematics to the future of the United States.

THOMAS, 112th Congress

Sen. Coons, Christopher A. [D-DE

2012-06-12

Senate - 06/12/2012 Submitted in the Senate, considered, and agreed to without amendment and with a preamble by Unanimous Consent. (All Actions) Tracker: This bill has the status Agreed to in SenateHere are the steps for Status of Legislation:

Supporting the goals and ideals of National Engineers Week.

THOMAS, 113th Congress

Rep. Lipinski, Daniel [D-IL-3

2013-02-25

House - 02/25/2013 Referred to the Committee on Science, Space, and Technology, and in addition to the Committee on Education and the Workforce, for a period to be subsequently determined by the Speaker, in each case for consideration of such provisions as fall within the... (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

The Current Status of Modular Coordination. A Research Correlation Conference of Building Research Institute, Division of Engineering and Industrial Research (Fall 1959).

ERIC Educational Resources Information Center

National Academy of Sciences - National Research Council, Washington, DC.

Publication of conference presentations include--(1) a brief review of current modular standard development, (2) the statistical status of modular practice, (3) availability of modular products, and (4) educational programs on modular coordination. Included are--(1) explanatory diagrams, (2) text of an open panel discussion, and (3) a list of…

Constructing engineers through practice: Gendered features of learning and identity development

NASA Astrophysics Data System (ADS)

Tonso, Karen L.

How do women and men student engineers develop an engineering identity (a sense of belonging, or not), while practicing "actual" engineering? What are the influences of gender, learning and knowledge, relations of power, and conceptions of equality on cultural identity development? I studied these issues in reform-minded engineering design classes, courses organized around teaching students communications, teamwork, and practical engineering. Engineering-student cultural identity categories revealed a status hierarchy, predicated on meeting "academic" criteria for excellence, and the almost total exclusion of women. While working as an engineering colleague on five student teams (three first-year and two senior) and attending their design classes, I documented how cultural identities were made evident and constructed in students' practical engineering. Design projects promoted linking academic knowledge with real-world situations, sharing responsibilities and trusting colleagues, communicating engineering knowledge to technical and non-technical members of business communities, and addressing gaps in students' knowledge. With a curriculum analysis and survey of students' perceptions of the differences between design and conventional courses, I embedded the design classes in the wider campus and found that: (1) Engineering education conferred prestige, power, and well-paying jobs on students who performed "academic" engineering, while failing to adequately encourage "actual" engineering practices. High-status student engineers were the least likely to perform "actual" engineering in design teams. (2) Engineering education advanced an ideology that encouraged its practitioners to consider men's privilege and women's invisibility normal. By making "acting like men act" the standards to which engineering students must conform, women learned to put up with oppressive treatment. Women's accepting their own mistreatment and hiding their womanhood became a condition of women's belonging. (3) Despite all of the pressures to do otherwise, (some) teams of students (at all levels) carved out small oases where "actual" engineering prevailed and women's participation was robust. Students--not faculty, not progressive pedagogy, not "reformed" courses--disrupted prevailing norms. However, two women engineering students, one on each senior team, performed fabulous "actual" engineering, yet neither of them had a job when they graduated--the only two senior students on my teams without jobs.

University of Wyoming, College of Engineering, undergraduate design projects to aid Wyoming persons with disabilities.

PubMed

Barrett, Steven F; Laurin, Kathy M; Bloom, Janet K Chidester

2003-01-01

In Spring 2002 the University of Wyoming received NSF funding from the Division of Bioengineering and Environmental Systems to provide a meaningful design experience for University of Wyoming, College of Engineering students that will directly aid individuals with disabilities within the state of Wyoming. Other universities have participated in this very worthwhile program [1, 2, 3]. To achieve the program purpose, the following objectives were established: Provide engineering students multi-disciplinary, meaningful, community service design projects, Provide persons with disabilities assistive devices to empower them to achieve the maximum individual growth and development and afford them the opportunity to participate in all aspects of life as they choose, Provide engineering students education and awareness on the special needs and challenges of persons with disabilities, and Provide undergraduate engineering students exposure to the biomedical field of engineering. To accomplish these objectives the College of Engineering partnered with three organizations that provide education and service related to disability. Specifically, the college has joined with the Wyoming Institute for Disabilities (WIND) assistive technology program, Wyoming New Options in Technology (WYNOT) and their Sports and Outdoor Assistive Recreation (SOAR) project along with the university's Special Education program. In this paper we will describe how the program was created, developed, and its current status.

An Introduction of Surveying and Geomatics Education with E-Platform in Nctu, Taiwan

NASA Astrophysics Data System (ADS)

Teo, T.-A.; Shih, P. T.-Y.

2011-09-01

This article presents the current status of Surveying and Geomatics education provided by Department of Civil Engineering at National Chiao Tung University, Taiwan. The Surveying and Geomatics Education at NCTU is introduced first. Then the current status of using E-learning platform for Surveying and Geomatics courses is described. This platform, also known as E-Campus, is designed and implemented by NCTU Digital Content Production Center. This paper also shows some statistical numbers of Surveying and Geomatics courses using E-Campus. The practical results indicated that the average login for undergraduate student is from 38 to 60 times per student for each course while the average login for graduate student is from 69 to 105.

Stop the RIKA BANARE

NASA Astrophysics Data System (ADS)

Watanabe, Yoshio

Children who want to study science & technology are decreasing continuously in Japan. This phenomenon is so called “Rika Banare” meaning literally science apart. Then, the number of students aiming at being engineers is decreasing. This will be a threat for Japanese industry. Many science & technology events are being held everywhere in Japan to overcome Rika Banare. However, most of them leave no sustainable influence over the students who reach to high school age. The reason why Rika Banare takes place is discussed. Then, it is insisted that the promotion of the attractive features of engineering career is important as well as improvement of the education system. In this article, eight proposals to stop Rika Banare are presented. Five of them are related to education system and the rest three to the improvement of social status of engineers.

On Campus with Women. Number 18, October 1977.

ERIC Educational Resources Information Center

Association of American Colleges, Washington, DC. Project on the Status and Education of Women.

Contents of this bulletin from the Association of American College's Project on the Status and Education of Women include: (1) affirmative action and employment, covering the future of women in academe, administrative positions, the "old boy" network, salaries, noncompliance with Title IX, women scientists and engineers, publications…

Integrating ethics in design through the value-sensitive design approach.

PubMed

Cummings, Mary L

2006-10-01

The Accreditation Board of Engineering and Technology (ABET) has declared that to achieve accredited status, 'engineering programs must demonstrate that their graduates have an understanding of professional and ethical responsibility.' Many engineering professors struggle to integrate this required ethics instruction in technical classes and projects because of the lack of a formalized ethics-in-design approach. However, one methodology developed in human-computer interaction research, the Value-Sensitive Design approach, can serve as an engineering education tool which bridges the gap between design and ethics for many engineering disciplines. The three major components of Value-Sensitive Design, conceptual, technical, and empirical, exemplified through a case study which focuses on the development of a command and control supervisory interface for a military cruise missile.

Traditional vocations and modern professions among Tamil Brahmans in colonial and post-colonial south India.

PubMed

Fuller, C J; Narasimhan, Haripriya

2010-01-01

Since the nineteenth century, Tamil Brahmans have been very well represented in the educated professions, especially law and administration, medicine, engineering and nowadays, information technology. This is partly a continuation of the Brahmans' role as literate service people, owing to their traditions of education, learning and literacy, but the range of professions shows that any direct continuity is more apparent than real. Genealogical data are particularly used as evidence about changing patterns of employment, education and migration. Caste traditionalism was not a determining constraint, for Tamil Brahmans were predominant in medicine and engineering as well as law and administration in the colonial period, even though medicine is ritually polluting and engineering resembles low-status artisans' work. Crucially though, as modern, English-language, credential-based professions that are wellpaid and prestigious, law, medicine and engineering were and are all deemed eminently suitable for Tamil Brahmans, who typically regard their professional success as a sign of their caste superiority in the modern world. In reality, though, it is mainly a product of how their old social and cultural capital and their economic capital in land were transformed as they seized new educational and employment opportunities by flexibly deploying their traditional, inherited skills and advantages.

Discussion on teaching reform of environmental planning and management

NASA Astrophysics Data System (ADS)

Zhang, Qiugen; Chen, Suhua; Xie, Yu; Wei, Li'an; Ding, Yuan

2018-05-01

The curriculum of environmental planning and management is an environmental engineering major curriculum established by the teaching steering committee of environmental science and engineering of Education Ministry, which is the core curriculum of Chinese engineering education professional certification. It plays an important role in cultivating environmental planning and environmental management ability of environmental engineering major. The selection and optimization of the course teaching content of environmental planning and management were discussed which including curriculum teaching content updating and optimizing and teaching resource system construction. The comprehensive application of teaching method was discussed which including teaching method synthesis and teaching method. The final combination of the assessment method was also discussed which including the formative assessment normal grades and the final result of the course examination. Through the curriculum comprehensive teaching reform, students' knowledge had been broadened, the subject status and autonomy of learning had been enhanced, students' learning interest had been motivated, the ability of students' finding, analyzing and solving problems had been improved. Students' innovative ability and positive spirit had been well cultivated.

Advanced degrees in astronautical engineering for the space industry

NASA Astrophysics Data System (ADS)

Gruntman, Mike

2014-10-01

Ten years ago in the summer of 2004, the University of Southern California established a new unique academic unit focused on space engineering. Initially known as the Astronautics and Space Technology Division, the unit operated from day one as an independent academic department, successfully introduced the full set of degrees in Astronautical Engineering, and was formally renamed the Department of Astronautical Engineering in 2010. The largest component of Department's educational programs has been and continues to be its flagship Master of Science program, specifically focused on meeting engineering workforce development needs of the space industry and government space research and development centers. The program successfully grew from a specialization in astronautics developed in mid-1990s and expanded into a large nationally-visible program. In addition to on-campus full-time students, it reaches many working students on-line through distance education. This article reviews the origins of the Master's degree program and its current status and accomplishments; outlines the program structure, academic focus, student composition, and enrollment dynamics; and discusses lessons learned and future challenges.

Beyond access to transformations: A cross-national analysis of women in science and engineering education, 1970--2000

NASA Astrophysics Data System (ADS)

Wotipka, Christine Min

2001-12-01

Over the years, attention to the issue of women in science has tended to focus on individual and organizational efforts to encourage women's greater participation in science and engineering fields of study and occupations. With more intense globalization processes that increasingly shape and are shaped by science, national- and global-level understandings of the situation of women in science and engineering as well as methods to boost their greater and more equal participation in these fields are necessary. This study is a cross-national and longitudinal study of women's participation in science and engineering fields of study at the higher education level. In order to explain the growth in women's participation in these fields of study between 1972--1992, I use a world society theoretical perspective to argue that national linkages to global models regarding women's educational equality and women in science may positively influence their participation in these fields. In multivariate statistical analyses, women's participation in higher education, measured as female enrollment in non-science and non-engineering fields of study, exerted a positive effect on women in science and engineering as did male enrollment in science and engineering higher education. The fact that linkage variables and those measuring women's status and other national-level factors were not found to be influential suggests that world-level factors may be contributing to women's greater participation in these fields. To better understand processes at this level, I use feminist critiques of science to examine the efforts made by the United Nations Educational, Scientific, and Cultural Organization (UNESCO), the United Nations Children's Fund (UNICEF), and the World Bank to address women in science and engineering education over a thirty year time period. My examination of their publications as well as conference declarations and platforms of action from ten international conferences finds a reliance on liberal feminist suggestions such as access and equal opportunities for women in science. More recently, UNESCO publications have included some transformative perspectives that entail possibilities for the inclusion of women's needs and interests into the existing male-dominated scientific curricula and structures. The same is true of some of the most recent international conferences.

Present Status of Geophysics Departments at Universities in Turkey from Perspectives of their Students

NASA Astrophysics Data System (ADS)

Karabulut, Savas; Baris Aygordu, Ozan; Benli, Aral

2015-04-01

This survey was conducted in order to make the students who are having geophysical engineering education in Turkey evaluate their departments from their own perspectives.By doing this we aimed to make a contribution to the geophysical engineering education and we tried to find out if there were any deficiencies in that matter and also the possible solutions.In this respect aproximately 500 undergraduates from 11 different state universities were asked 25 questions regarding both their socio-economic status and their ideas on their future professions.In the survey the students were asked to state their high-school graduation;whether it is an Anatolian High-school,Vocational high-school or college and if geophysical engineering education was their first choice at the university entrance exams.The students' foreign language status-if there were any- except their mother tongue were asked and also their opinions on geophysical education at their universities.Besides these the students were asked in which fields they study in their department; Seismology, Geophysics or Applied Geophysics and if they found the geophysical equipments adequate in their departments and also the programming languages-like data processing laboratories.In the survey we tried to find out if the students were encouraged to participate in the meetings and congresses in their field by their instructers and if they found the theoretical training adequate besides the practical one.Above all the students answered questions if they had any worries about future job opportunities ; what their goals were after they graduate and if they could easily get access to any kind of Turkish sources in their field and if they were reluctant to work at any jobs part-time or full-time during university.The results of the survey were presented to the Union of Turkish Engineers and Architects and also to the related heads of departments.The most striking parts of this survey were that the students were not edequate enough to interpret and analyse the foreign articles and journeys because of their poor foreign language levels and % 80,5 were very anxious to get a proper job in the future and %78,6 did not find the sources edequate in Turkish and %91,8 of these students thought that theoratical training was not enough besides practical one.

Sense and Sensibility: The Case for the Nationwide Inclusion of Engineering in the K-12 Curriculum

NASA Technical Reports Server (NTRS)

Lindberg, Robert E.; Pinelli, Thomas E.; Batterson, James G.

2008-01-01

The competitive status of the United States is inextricably linked to innovation just as innovation is inseparable from science, technology, engineering, and mathematics. To stay competitive in innovation requires that the United States produce a 21st century workforce complete with requisite education, training, skills, and motivation. If we accept a priori that science, technology, engineering, and mathematics education are crucial to competitiveness and innovation and that, in terms of innovation, mathematics, science, and engineering are interdependent, why are mathematics and science uniformly ubiquitous in the K-12 curriculum while engineering is conspicuously absent? We are passionate in our belief that the uniform addition of engineering to the K-12 curriculum will help ensure that the nation has "the right" 21st Century workforce. Furthermore, we believe that a nationwide effort, led by a coalition of engineering academics, practitioners, and societies is required to turn this goal into reality. However, accomplishing this goal necessitates, as we are reminded by the title of Jane Austen's timeless novel, "Sense and Sensibility", a workable solution that seeks the "middle ground" between passion and reason. We begin our paper by making two essential points: Engineers are not scientists. Engineering exists separate from science, has its own specialized knowledge community apart from science, and it is largely responsible for many of the most significant advancements and improvements in the quality of our life. Our workable solution requires that K-12 education, nationwide, accommodate the inclusion of engineering as a stand alone curriculum and we offer three reasons to support our position: (1) workforce development, (2) stimulating interest in STEM (science, technology, engineering, and mathematics) courses and careers, and (3) creating a technologically literate society. We conclude with some thoughts on how this important goal can be accomplished.

Cause and control: education and training of professional industrial hygienists for 2020.

PubMed

Sherwood, R J

1992-06-01

By the year 2020, the environmental movement will have established a recognized profession, expert at studying deleterious effects in the working and public domains. Environmental science practitioners will be better able to identify and relate ill effects to the presence of adverse agents in the environment; they will not, however, necessarily be skilled at developing systems for control. Industrial hygienists should provide the unique and special skills required to establish economically optimum control systems. Industrial hygiene should by then have been redefined to emphasize this critical role of its professional members. A new orientation for education is therefore proposed to provide a sound basis for the professional needs of industrial hygienists who should be at the peak of their careers in 2020. Members of the profession should then be the leaders in research on, and practice of, the science and engineering of design, installation, and monitoring of control systems for occupational and environmental hazards. The preferred educational background for entry to the profession should be some branch of engineering, which by then must have recovered its lost status and be divided into fewer specialized compartments than it is today. Engineering should provide a broader base for students entering professional education in this field, who will be more concerned with prevention and engineering control of both occupational and environmental hazards, rather than with measurement and epidemiology of the biological and toxicologic sciences. Preparation for professional work in industrial hygiene will call for the specialized education of engineers required to design and maintain processes that minimize the use, production, or generation of hazardous substances.(ABSTRACT TRUNCATED AT 250 WORDS)

Education for eHealth--a status analysis.

PubMed

Herzog, Juliane; Pohn, Birgit; Forjan, Mathias; Sauermann, Stefan; Urbauer, Philipp

2014-01-01

eHealth is not only a growing market, but also an important factor for new healthcare systems. National and European initiatives implicitly demand a higher level of knowledge in the areas of healthcare, engineering and management. As part of the eLearning4eHealth project an initial web based study was performed concentrating on European and global eHealth related educational programs. The results show that eHealth related courses do not evenly exist for the identified professions. 43% of the offered programs are focused on the engineering sector, whereas only 21% are available for the management sector. In order to offer compatible and comparable state of knowledge in the identified fields of profession and knowledge, further educational programs may be necessary. Despite the found shortcomings, results have shown that international activities have started in order to close the gaps and improve the quality of knowledge in the interdisciplinary field of eHealth.

[Sexuality education on the Internet : From Dr. Sommer to Dr. Google].

PubMed

Döring, Nicola

2017-09-01

Female and male adolescents in Germany are increasingly using the Internet to find information about sexuality and sexual health. This review paper summarizes what we know about the status quo of online sexuality education in Germany.Based on a systematic literature review including 40 papers from international, peer-reviewed journals spanning 2010-2017, this paper first describes different aspects of the sexuality-related online search behavior of adolescents: its prevalence, predictors, topics and contexts. One main finding is the fact that adolescents use a computer or smartphone to type their sexuality-related questions into the search engine Google or the search engine of the video platform YouTube.Based on 54 online searches, this paper subsequently presents the kind of sexuality-related online content adolescents find if they ask "Dr. Google" for sexual advice; a collection of 1236 authentic sexuality-related questions of adolescents was used for this analysis. It turned out that online sexuality education offered by leading professional organizations like the BZgA ("Bundeszentrale für gesundheitliche Aufklärung") or pro familia was nearly invisible, while numerous other providers of online sex education consistently appeared in the top Google search results. Among them were the "Dr. Sommer" team of the youth magazine Bravo; online healthcare and advice portals; online forums; the online encyclopedia Wikipedia and, above all, sex education channels on YouTube. In this paper, the latter are presented in more detail for the first time.The third part of the paper addresses the quality of online sexual education over four main areas of quality evaluation. The presentation of the status quo ends with some recommendations both for future research and for sexuality education in practice.

Application of probabilistic analysis/design methods in space programs - The approaches, the status, and the needs

NASA Technical Reports Server (NTRS)

Ryan, Robert S.; Townsend, John S.

1993-01-01

The prospective improvement of probabilistic methods for space program analysis/design entails the further development of theories, codes, and tools which match specific areas of application, the drawing of lessons from previous uses of probability and statistics data bases, the enlargement of data bases (especially in the field of structural failures), and the education of engineers and managers on the advantages of these methods. An evaluation is presently made of the current limitations of probabilistic engineering methods. Recommendations are made for specific applications.

Expressing the sense of the House of Representatives that adding art and design into Federal programs that target the Science, Technology, Engineering, and Mathematics (STEM) fields encourages innovation and economic growth in the United States.

THOMAS, 113th Congress

Rep. Langevin, James R. [D-RI-2

2013-02-04

House - 02/04/2013 Referred to the Committee on Education and the Workforce, and in addition to the Committee on Science, Space, and Technology, for a period to be subsequently determined by the Speaker, in each case for consideration of such provisions as fall within the... (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Some Observations on the Current Status of Performing Finite Element Analyses

NASA Technical Reports Server (NTRS)

Raju, Ivatury S.; Knight, Norman F., Jr; Shivakumar, Kunigal N.

2015-01-01

Aerospace structures are complex high-performance structures. Advances in reliable and efficient computing and modeling tools are enabling analysts to consider complex configurations, build complex finite element models, and perform analysis rapidly. Many of the early career engineers of today are very proficient in the usage of modern computers, computing engines, complex software systems, and visualization tools. These young engineers are becoming increasingly efficient in building complex 3D models of complicated aerospace components. However, the current trends demonstrate blind acceptance of the results of the finite element analysis results. This paper is aimed at raising an awareness of this situation. Examples of the common encounters are presented. To overcome the current trends, some guidelines and suggestions for analysts, senior engineers, and educators are offered.

Sensor fault diagnosis of aero-engine based on divided flight status.

PubMed

Zhao, Zhen; Zhang, Jun; Sun, Yigang; Liu, Zhexu

2017-11-01

Fault diagnosis and safety analysis of an aero-engine have attracted more and more attention in modern society, whose safety directly affects the flight safety of an aircraft. In this paper, the problem concerning sensor fault diagnosis is investigated for an aero-engine during the whole flight process. Considering that the aero-engine is always working in different status through the whole flight process, a flight status division-based sensor fault diagnosis method is presented to improve fault diagnosis precision for the aero-engine. First, aero-engine status is partitioned according to normal sensor data during the whole flight process through the clustering algorithm. Based on that, a diagnosis model is built for each status using the principal component analysis algorithm. Finally, the sensors are monitored using the built diagnosis models by identifying the aero-engine status. The simulation result illustrates the effectiveness of the proposed method.

Sensor fault diagnosis of aero-engine based on divided flight status

NASA Astrophysics Data System (ADS)

Zhao, Zhen; Zhang, Jun; Sun, Yigang; Liu, Zhexu

2017-11-01

Fault diagnosis and safety analysis of an aero-engine have attracted more and more attention in modern society, whose safety directly affects the flight safety of an aircraft. In this paper, the problem concerning sensor fault diagnosis is investigated for an aero-engine during the whole flight process. Considering that the aero-engine is always working in different status through the whole flight process, a flight status division-based sensor fault diagnosis method is presented to improve fault diagnosis precision for the aero-engine. First, aero-engine status is partitioned according to normal sensor data during the whole flight process through the clustering algorithm. Based on that, a diagnosis model is built for each status using the principal component analysis algorithm. Finally, the sensors are monitored using the built diagnosis models by identifying the aero-engine status. The simulation result illustrates the effectiveness of the proposed method.

The Threat of Sexism in a STEM Educational Setting: The Moderating Impacts of Ethnicity and Legitimacy Beliefs on Test Performance

ERIC Educational Resources Information Center

O'Brien, Laurie T.; Garcia, Donna M.; Adams, Glenn; Villalobos, J. Guillermo; Hammer, Elliott; Gilbert, Patricia

2015-01-01

Social identity threat has negative consequences for women in science, technology, engineering, and mathematics (STEM) fields. The present study examined whether legitimacy beliefs--beliefs that status differences between men and women in STEM fields are fair--put women at risk for experiencing social identity threat and poorer performance on a…

The pipeline still leaks and more than you think: a status report on gender diversity in biomedical engineering.

PubMed

Chesler, Naomi C; Barabino, Gilda; Bhatia, Sangeeta N; Richards-Kortum, Rebecca

2010-05-01

While the percentage of women in biomedical engineering is higher than in many other technical fields, it is far from being in proportion to the US population. The decrease in the proportion of women and underrepresented minorities in biomedical engineering from the bachelors to the masters to the doctoral levels is evidence of a still leaky pipeline in our discipline. In addition, the percentage of women faculty members at the assistant, associate and full professor levels remain disappointingly low even after years of improved recruitment of women into biomedical engineering at the undergraduate level. Worse, the percentage of women graduating with undergraduate degrees in biomedical engineering has been decreasing nationwide for the most recent three year span for which national data are available. Increasing diversity in biomedical engineering is predicted to have significant research and educational benefits. The barriers to women's success in biomedical engineering and strategies for overcoming these obstacles-and fixing the leaks in the pipeline-are reviewed.

Environmental engineering education: examples of accreditation and quality assurance

NASA Astrophysics Data System (ADS)

Caporali, E.; Catelani, M.; Manfrida, G.; Valdiserri, J.

2013-12-01

Environmental engineers respond to the challenges posed by a growing population, intensifying land-use pressures, natural resources exploitation as well as rapidly evolving technology. The environmental engineer must develop technically sound solutions within the framework of maintaining or improving environmental quality, complying with public policy, and optimizing the utilization of resources. The engineer provides system and component design, serves as a technical advisor in policy making and legal deliberations, develops management schemes for resources, and provides technical evaluations of systems. Through the current work of environmental engineers, individuals and businesses are able to understand how to coordinate society's interaction with the environment. There will always be a need for engineers who are able to integrate the latest technologies into systems to respond to the needs for food and energy while protecting natural resources. In general, the environment-related challenges and problems need to be faced at global level, leading to the globalization of the engineering profession which requires not only the capacity to communicate in a common technical language, but also the assurance of an adequate and common level of technical competences, knowledge and understanding. In this framework, the Europe-based EUR ACE (European Accreditation of Engineering Programmes) system, currently operated by ENAEE - European Network for Accreditation of Engineering Education can represent the proper framework and accreditation system in order to provide a set of measures to assess the quality of engineering degree programmes in Europe and abroad. The application of the accreditation model EUR-ACE, and of the National Italian Degree Courses Accreditation System, promoted by the Italian National Agency for the Evaluation of Universities and Research Institutes (ANVUR), to the Environmental Engineering Degree Courses at the University of Firenze is presented. In particular, the accreditation models of the multidisciplinary first cycle degree in Civil, Building and Environmental Engineering and the more specific second cycle degree in Environmental Engineering are discussed. The critical issues to assure the quality and the status of environmental engineering graduates, in terms of applying knowledge capacities and technical innovative competences, according to the more engineering focused EUR-ACE skill descriptors as well as with respect to the Dublin descriptors, at local and global scale are also compared. The involvement of the professional working world in the definition of goals in skills, of typical expectations of achievements and abilities is also described. The system for educating engineers in communicating knowledge and understanding, making informed judgments and choices, capacities to lifelong learning is in addition assessed. The promotion of innovative aspects related with the environmental engineering education, and of the role that science and technology could play in environmental engineering education is also taken into consideration.

Research on the Mode of University-Enterprise Cooperation to Promote Engineering Students' Employment

NASA Astrophysics Data System (ADS)

Hui, Yan; Lihua, Sun

2018-06-01

The employment of university students has become a hot issue of concern to the whole society. Promoting the employment of university students is a top priority for higher education institutions. University-enterprise cooperation is an important trend in the development of modern higher education. It is also an important channel for promoting the employment of university students, especially for engineering students. Through an in-depth analysis of the status quo of employment of university graduates, this paper proposes four modes of university-enterprise cooperation to promote university graduates' employment: The post-employment cooperation model, the professional internship cooperation model, the second classroom expansion cooperation model and the enterprise-oriented recruitment model, and further proposed the countermeasures to strengthen the cooperation between university and enterprise in order to promote the employment of university students.

Needed: Reincarnation of National Defense Education Act of 1958

NASA Astrophysics Data System (ADS)

Harris, Mary M.; Miller, James R.

2005-06-01

This paper reviews the historical and current response of the United States to threats to its world leadership in scientific endeavors, with particular attention to the National Defense Education Act of 1958. The current status of the United States in mathematics, science, and engineering education is reviewed with respect to K-12 student achievement, K-12 teacher quality, numbers of degrees granted, and other indicators of international competitiveness. Concluding that we are a nation in peril, recommendations are made to enhance the likelihood that the United States will retain its preeminent position in science and technology and, therefore, provide for the national defense and economic wellbeing of citizens in an information age and global economy.

Career Goals and Decisions: An Intersectionality Approach

NASA Astrophysics Data System (ADS)

Bardon, Emma

This project explores the career paths to date of seven graduates of the University of Waterloo's Mechanical Engineering program, and examines the influences that led them to choose their university program. I particularly considered the participants' status as members of underrepresented or overrepresented groups, using the contexts of the history of the profession of Mechanical Engineering and prior research on underrepresentation in Science, Technology, Engineering, and Mathematics fields. I used semi-structured interviews and an intersectionality framework to investigate aspects of identity, interests, and career influences. I found three key themes among the participants: human influences, including information sources, role models, and mentors; influences of educational and outreach activities; and personal interests and aptitudes. I use the uncovered themes to recommend a combination of future studies and outreach programs.

Establishing a `Centre for Engineering Experimentation and Design Simulation': a step towards restructuring engineering education in India

NASA Astrophysics Data System (ADS)

Venkateswarlu, P.

2017-07-01

Reforms in undergraduate engineering curriculum to produce engineers with entrepreneurial skills should address real-world problems relevant to industry and society with active industry support. Technology-assisted, hands-on projects involving experimentation, design simulation and prototyping will transform graduates into professionals with necessary skills to create and advance knowledge that meets global standards. To achieve this goal, this paper proposes establishing a central facility, 'Centre for Engineering Experimentation and Design Simulation' (CEEDS) in autonomous engineering colleges in India. The centre will be equipped with the most recent technology resources and computational facilities where students execute novel interdisciplinary product-oriented projects benefiting both industry and society. Students undertake two projects: a short-term project aimed at an engineering solution to a problem in energy, health and environment and the other a major industry-supported project devoted to a product that enhances innovation and creativity. The paper presents the current status, the theoretical and pedagogical foundation for the centre's relevance, an activity plan and its implementation in the centre for product-based learning with illustrative examples.

Refueling the U.S. Innovation Economy: Fresh Approaches to Science, Technology, Engineering and Mathematics (STEM) Education. Executive Summary

ERIC Educational Resources Information Center

Atkinson, Robert; Mayo, Merrilea

2010-01-01

Innovation has powered America's economy, creating good jobs and a high standard of living. Yet, the U.S. share of innovation-based industries is in decline, jeopardizing our status as the world's innovation leader. And one reason is that the United States has been unable to produce enough of its own workers with sufficient skills in science,…

Intertwined effects of gender and migration status on persistence in SET study programmes

NASA Astrophysics Data System (ADS)

Guenther, Elisabeth Anna; Koeszegi, Sabine Theresia

2017-11-01

This paper explores the intersectional interference of gender and migration status on students' persistence at an Austrian University of Technology. While controlling for the pre-university education and performance indicators, we estimate the odds for the persistence of male and female students, as well as of students with diverse migration statuses. We use the enrolment data of students from 1998 to 2010. The analysis reveals remarkable and significant effects of gender and migration status, as well as intersectional interference effects from both social categories on persistence. Female and students with immigration status are less likely to persist, even if performance and previous relevant experiences are controlled. A segregated analysis of the student population sheds further light on the interlocked and entangled effects of the social ascriptions underlying gender and migration status. The analysis supports the proposition of the accumulation of (dis-)advantages along students' careers. The profound quantification of gender and migration status effects can be utilised as basis for further research and purposeful policy measures to increase persistence in Science, Engineering and Technology for students with diverse backgrounds.

Incorporating service-learning within engineering and technology education in secondary schools

NASA Astrophysics Data System (ADS)

Smiley, Craig L.

This study focuses the status of service-learning incorporated into the secondary engineering and technology classroom in the State of Indiana. Post-secondary engineering service-learning programs have been found to increase student interest in engineering to attract females into engineering (Coyle, Jamieson, & Oakes, 2005). Engineering, Design, and Development (EDD) is the capstone class of Project Lead The Way (PLTW) curriculum taught in many schools across Indiana, in which students design and develop a project that addresses an open-ended engineering problem. Of all the courses offered in the PLTW curriculum, this has the greatest potential for students to engage in a service-learning project, because the open-ended engineering problem could be used to help the community. A Likert-type survey was sent to the 62 secondary technology education teachers in Indiana who were certified to teach EDD during the 2011-2012 school year to identify the frequency at which the core components of service-learning, as identified by the National Service-Learning Clearinghouse (2006), were being implemented in the EDD curriculum. Fifteen teachers completed the survey by the end of the 2011-2012 academic calendar. Four of the 15 EDD teachers (27%) reported that a majority of their students' projects addressed a need in the community, and therefore were considered to be service-learning projects. The percentage of projects that were called service-learning projects by the respondents appeared to have a direct relationship with the total number of students enrolled in the PLTW program, and an inverse relationship with the number of years the teacher had been teaching technology education. Upon further study, only 2 of these EDD teachers (13%) were guiding students to collaborate with their community partner frequently enough to have an experience indicative of high quality service-learning according to the National Service-Learning Clearinghouse.

Engineering Play: Exploring Associations with Executive Function, Mathematical Ability, and Spatial Ability in Preschool

NASA Astrophysics Data System (ADS)

Gold, Zachary Samuel

Engineering play is a new perspective on preschool education that views constructive play as an engineering design process that parallels the way engineers think and work when they develop engineered solutions to human problems (Bairaktarova, Evangelou, Bagiati, & Brophy, 2011). Early research from this perspective supports its use in framing play as a key learning context. However, no research to date has examined associations between engineering play and other factors linked with early school success, such as executive function, mathematical ability, and spatial ability. Additionally, more research is needed to further validate a new engineering play observational measure. This study had two main goals: (1) to gather early validity data on the engineering play measure as a potentially useful instrument for documenting the occurrence of children's engineering play behaviors in educational contexts, such as block play. This was done by testing the factor structure of the engineering play behaviors in this sample and their association with preschoolers' planning, a key aspect of the engineering design process; (2) to explore associations between preschoolers' engineering play and executive function, mathematical ability, and spatial ability. Participants included 110 preschoolers (62 girls; 48 boys; M = 58.47 months) from 10 classrooms in the Midwest United States coded for their frequency of engagement in each of the nine engineering play behaviors. A confirmatory factor analysis resulted in one engineering play factor including six of the engineering play behaviors. A series of marginal regression models revealed that the engineering play factor was significantly and positively associated with the spatial horizontal rotation transformation. However, engineering play was not significantly related to planning ability, executive function, informal mathematical abilities, or other spatial transformation skills. Follow-up analyses revealed significant positive associations between engineering play and planning, executive function, and geometry for only a subgroup of children (n = 27) who had individualized education program (IEP) status. This was the first of a series of studies planned to evaluate the potential of the engineering play perspective as a tool for understanding young children's development and learning across multiple developmental domains. Although most hypotheses regarding engineering play and cognitive skills were not supported, the study provided partial evidence for the reliability and validity of the engineering play observation measure. Future research should include larger sample sizes with more statistical power, continued refinement of the engineering play observation measure, examination of potential associations with specific early learning domains, including spatial ability and language, and more comparisons of engineering play between typically developing children and children with disabilities.

76 FR 44891 - Monsanto Co.; Availability of Petition, Plant Pest Risk Assessment, and Environmental Assessment...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-27

... Determination of Nonregulated Status for Corn Genetically Engineered for Drought Tolerance AGENCY: Animal and... nonregulated status for corn designated as MON 87460, which has been genetically engineered for drought... nonregulated status for corn designated as MON 87460, which has been genetically engineered for drought...

76 FR 5780 - Determination of Regulated Status of Alfalfa Genetically Engineered for Tolerance to the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-02

...] Determination of Regulated Status of Alfalfa Genetically Engineered for Tolerance to the Herbicide Glyphosate... for tolerance to the herbicide glyphosate based on APHIS' final environmental impact statement. FOR... regulated status of alfalfa genetically engineered for tolerance to the herbicide glyphosate based on an...

Household Crowding During Childhood and Long-Term Education Outcomes.

PubMed

Lopoo, Leonard M; London, Andrew S

2016-06-01

Household crowding, or having more household members than rooms in one's residence, could potentially affect a child's educational attainment directly through a number of mechanisms. We use U.S. longitudinal data from the Panel Study of Income Dynamics to derive new measures of childhood crowding and estimate negative associations between crowding during one's high school years and, respectively, high school graduation by age 19 and maximum education at age 25. These negative relationships persist in multivariate models in which we control for the influence of a variety of factors, including socioeconomic status and housing-cost burden. Given the importance of educational attainment for a range of midlife and later-life outcomes, this study suggests that household crowding during one's high school years is an engine of cumulative inequality over the life course.

Project Lead the Ways' Long-Term Effects on Post-Secondary Engineering Academic Success

NASA Astrophysics Data System (ADS)

Zion, George H.

The purpose of this study was to investigate the relationship between students' high school Project Lead They Way participation and their subsequent academic success in post-secondary engineering studies and to assess to what degree, if any, their level of Project Lead The Way (PLTW) participation, gender, and AALANA status (African American, Latino/a American and Native American) effected this success. PLTW is the nation's single largest provider of pre-engineering curriculums, the subject of this research study, currently being offered in over 3,200 secondary schools nationwide. Despite this level of integration, the amount of research on PLTW's effectiveness has been very limited. To date, the majority of the literature on PLTW has examined its impact on students' high school academic performance or their desire to further their engineering studies. The findings from these studies have been overwhelmingly positive, indicating that PLTW students often had greater achievements in math and science and either plan to, or have actually enrolled, in post-secondary studies at higher rates. Nevertheless, the amount of literature on PLTW's effects on students' academic success in post-secondary engineering studies is very limited. Furthermore, no research has yet to examine for the moderating effects of gender, ethnicity, or level of PLTW participation on students' post-secondary academics success. The population of interest for this research study was 1,478 students who entered an undergraduate engineering program from 2007 to 2009 at a privately endowed, co-educational university located in the northeastern United States. The findings of this research study were that virtually all the effects of PLTW participation, gender, and AALANA status had on academic success were observed during students' freshmen and sophomore years. These effects were positive for PLTW participation, and adverse for female and AALANA students. Additionally, PLTW participation, gender, and AALANA status only explained a small amount of the variance for each of the academic success metrics. These conclusions suggest that future research on PLTW should focus on the first and second year of study and expand the factors examined, both quantitative and qualitative, to gain a greater understanding of the complex factors that influence students' initial academic success in post-secondary engineering studies.

Applicability of Online Education to Large Undergraduate Engineering Courses

NASA Astrophysics Data System (ADS)

Bir, Devayan Debashis

With the increase in undergraduate engineering enrollment, many universities have chosen to teach introductory engineering courses such as Statics of Engineering and Mechanics of Materials in large classes due to budget limitations. With the overwhelming literature against traditionally taught large classes, this study aims to see the effects of the trending online pedagogy. Online courses are the latest trend in education due to the flexibility they provide to students in terms of schedule and pace of learning with the added advantage of being less expensive for the university over a period. In this research, the effects of online lectures on engineering students' course performances and students' attitudes towards online learning were examined. Specifically, the academic performances of students enrolled in a traditionally taught, lecture format Mechanics of Materials course with the performance of students in an online Mechanics of Materials course in summer 2016 were compared. To see the effect of the two different teaching approaches across student types, students were categorized by gender, enrollment status, nationality, and by the grades students obtained for Statics, one of the prerequisite courses for Mechanics of Materials. Student attitudes towards the online course will help to keep the process of continuously improving the online course, specifically, to provide quality education through the online medium in terms of course content and delivery. The findings of the study show that the online pedagogy negatively affects student academic performance when compared to the traditional face-to-face pedagogy across all categories, except for the high scoring students. Student attitudes reveal that while they enjoyed the flexibility schedule and control over their pace of studying, they faced issues with self-regulation and face-to-face interaction.

Merging science, engineering, and data with FUN: Recreational Drones in STEaM Education Activities and Science Fair Projects

NASA Astrophysics Data System (ADS)

Olds, S. E.; Mooney, M. E.; Dahlman, L. E.

2016-12-01

Recreational drones, also known as unmanned aerial vehicles (UAVs), provide an ideal platform for engaging students in science, technology, engineering, and math (STEM) investigations for science fair projects, after-school clubs, and in-class activities. UAVs are very popular (estimate of >1 million received as gifts this past year), relatively inexpensive (<$100), weigh less than 250g (don't require FAA registration), are modifiable, and can carry small instrument packages. Seeing the world from above can stimulate curiosity and give students a reason to engage in the Next Generation Science Standards (NGSS) process of science and engineering practices by designing and carrying out their own investigations. Using drones to facilitate experiments, students also participate in engineering design: they may choose off-the-shelf sensors or build DIY sensors to carry on their UAVs. Leveraging the learning potential of UAVs, the Federation of Earth Science Information Partners (ESIP) Education Committee has been developing an e-book of learning activities and investigation suggestions for secondary education students. The freely available download incorporates UAV civility and safety through a pre-flight checklist and flying guidelines, suggests science and flight team roles, and advocates robust data and metadata-collection practices. The ESIP team also worked with an engineer to build a 33-gram prototype environmental logger called SABEL (Shelley (Olds) and Bob's Environmental Logger). SABEL collects temperature, humidity, and GPS position assembled on an Arduino board. This presentation will elaborate upon the year-long process of working with educators via webinars and a 1-day workshop at the 2016 ESIP summer meeting and beyond. It will also provide examples of student-led investigations, instructions for building the SABEL sensor package, insights gleaned from workshop feedback - and - the status of the new e-book compilation of student-focused activities using recreational drones to pursue STEM investigations!

Environmental Engineering Curricula assessment in the global world

NASA Astrophysics Data System (ADS)

Caporali, Enrica; Catelani, Marcantonio; Manfrida, Giampaolo; Valdiserri, Juna

2014-05-01

Environmental engineers are technicians with specific expertise on the sustainability of human presence in the environment. Among other global dilemmas, to the environmental engineers it is often demanded to be able in developing systematic, innovative solutions in order to simultaneously meet water and energy needs, to build resilience to natural and technological disasters, to more accurately gauge and manage countries' greenhouse gas emissions. The general objectives of the Environmental Engineers are to establish actions of environmental sustainability as well as to verify progress toward global goals or international commitments. The globalization of challenges and problems to be faced, leads, in general, to the globalization of the engineering profession. In particular, since the environmental issues are without boundaries, and many and different are the involved professions and the competences, the environmental engineer must have a multidisciplinary and interdisciplinary approach to adequately answer to the demand of technical innovative knowledge at global scale. The environmental engineers, more and more, are involved in international projects were the effective collaboration requires not only the capacity to communicate in a common technical language, but also the assurance of an adequate and common level of technical competences, knowledge and understanding. The Europe-based EUR ACE system, currently operated by ENAEE - European Network for Accreditation of Engineering Education, can represent the proper framework and accreditation system in order to provide a set of measures to assess the quality of engineering degree programmes in Europe and abroad. In the global frame of the knowledge triangle: education-innovation-research, the accreditation and quality assurance of engineering curricula in Europe is discussed with reference to the Environmental engineering curricula, of the 1st and 2nd cycle, based on the European Credit Transfer System and in accordance with the Bologna Process, offered at School of Engineering, University of Firenze. The application of the accreditation model EUR-ACE to the multidisciplinary first cycle degree in Civil, Building and Environmental Engineering and the more specific second cycle degree in Environmental Engineering is discussed. Particularly, the critical issues to guarantee the quality and the status of environmental engineering graduates, in terms of applying knowledge capacities and technical innovative competences are examined. The expected learning outcomes of the quality assessment according the Dublin descriptors or the more engineering focused EUR-ACE skill descriptors, and at local and global scale are analysed. The system for educating engineers in communicating knowledge and understanding, making informed judgments and choices, capacities to lifelong learning is also assessed. The involvement of the professional working world in the definition of goals in skills, of typical expectations of achievements and abilities, and in general in comparing the teaching profile with the actual needs of the technical workforce, is described. With the aim to promote the innovative aspects related with the environmental engineering education, the important role that science and technology could play is also taken into consideration.

76 FR 39812 - Scotts Miracle-Gro Co.; Regulatory Status of Kentucky Bluegrass Genetically Engineered for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-07

...] Scotts Miracle-Gro Co.; Regulatory Status of Kentucky Bluegrass Genetically Engineered for Herbicide... engineered for herbicide tolerance without the use of plant pest components, does not meet the definition of... has been genetically engineered for herbicide tolerance, does not meet the definition of a regulated...

Reasons and motivations for the option of an engineering career in Portugal

NASA Astrophysics Data System (ADS)

Dias, Diana

2011-08-01

Towards the end of their secondary education, students face significant pressures in their decision about their career plan. These pressures are internal and external, personal and social, individual and from the reference group. This paper aims at understanding the reasons driving engineering students' choices, their perceived needs and aspirations. Moreover, it discusses how, in that process, students are constrained by family and friends and are conditioned by factors such as their socioeconomic and cultural background, employability prospects and gender. The construction of a career map/plan and the reasons and motivations for the option of an engineering career are reviewed, based on the qualitative analysis of students' discourses. The data indicate the relevance of several criteria such as social status, intelligence, gender, competences, values and interests in the construction of career aspirations. All these levels are highly influenced by self-esteem, which is closely related to the social value of training options and career paths.

Development of TPF-1 plasma focus for education

NASA Astrophysics Data System (ADS)

Picha, R.; Promping, J.; Channuie, J.; Poolyarat, N.; Sangaroon, S.; Traikool, T.

2017-09-01

The plasma focus is a device that uses high voltage and electromagnetic force to induce plasma generation and acceleration, in order to cause nuclear reactions. Radiation of various types (X-ray, gamma ray, electrons, ions, neutrons) can be generated using this method during the pinch phase, thus making the plasma focus able to serve as a radiation source. Material testing, modification, and identification are among the current applications of the plasma focus. Other than being an alternative option to isotopic sources, the plasma focus, which requires multidisciplinary team of personnel to design, operate, and troubleshoot, can also serve as an excellent learning device for physics and engineering students in the fields including, but not limited to, plasma physics, nuclear physics, electronics engineering, and mechanical engineering. This work describes the parameters and current status of Thai Plasma Focus 1 (TPF-1) and the characteristics of the plasma being produced in the machine using a Rogowski coil.

Current status of nuclear engineering education

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palladino, N.J.

1975-09-01

The 65 colleges and universities offering undergraduate degrees in nuclear engineering and the 15 schools offering strong nuclear engineering options are, in general, doing a good job to meet the current spectrum of job opportunities. But, nuclear engineering programs are not producing enough graduates to meet growing demands. They currently receive little aid and support from their customers --industry and government--in the form of scholarships, grants, faculty research support, student thesis and project support, or student summer jobs. There is not enough interaction between industry and universities. Most nuclear engineering programs are geared too closely to the technology of themore » present family of reactors and too little to the future breeder reactors and controlled thermonuclear reactors. In addition, nuclear engineering programs attract too few women and members of minority ethnic groups. Further study of the reasons for this fact is needed so that effective corrective action can be taken. Faculty in nuclear engineering programs should assume greater initiative to provide attractive and objective nuclear energy electives for technical and nontechnical students in other disciplines to improve their technical understanding of the safety and environmental issues involved. More aggressive and persistent efforts must be made by nuclear engineering schools to obtain industry support and involvement in their programs. (auth)« less

Pedagogical Training and Research in Engineering Education

ERIC Educational Resources Information Center

Wankat, Phillip C.

2008-01-01

Ferment in engineering has focused increased attention on undergraduate engineering education, and has clarified the need for rigorous research in engineering education. This need has spawned the new research field of Engineering Education and greatly increased interest in earning Ph.D. degrees based on rigorous engineering education research.…

Multivariate Assessment of Middle School Students' Interest in STEM Career: a Profile from Turkey

NASA Astrophysics Data System (ADS)

Koyunlu Ünlü, Zeynep; Dökme, İlbilge

2018-05-01

According to a report by the Turkish Industry and Business Association, Turkey will need approximately 1 million individuals to be employed in Science Technology Engineering Mathematics (STEM) fields by 2023, and 31% of this requirement will not be met. For continuous economic development, there is a need to integrate STEM into education in Turkey, which brings the need for research in this area. This study, based on a survey model, aimed to determine the level of interest of a sample of Turkish middle school students in STEM careers on the basis of gender, where they lived, grade levels, their end-of-semester grades, and their parents' educational status and levels of income. The research data was collected using the STEM Career Interest Survey (STEM-CIS) and Personal Information Form, which were applied to 851 middle school students (fifth and eighth graders). The collected data was analyzed with SPSS using Mann Whitney U and Kruskal Wallis H tests. It was found that middle school students' interest in STEM careers differed according to sex, where they lived, and grade levels but it did not differ in relation to their parents' educational status and the levels of income of the family. It is believed that the results obtained in this study reflecting the profile in Turkey will guide educational policy makers, curriculum developers, teachers, pre-service teachers, and researchers about STEM education.

Democratizing education? Examining access and usage patterns in massive open online courses.

PubMed

Hansen, John D; Reich, Justin

2015-12-04

Massive open online courses (MOOCs) are often characterized as remedies to educational disparities related to social class. Using data from 68 MOOCs offered by Harvard and MIT between 2012 and 2014, we found that course participants from the United States tended to live in more-affluent and better-educated neighborhoods than the average U.S. resident. Among those who did register for courses, students with greater socioeconomic resources were more likely to earn a certificate. Furthermore, these differences in MOOC access and completion were larger for adolescents and young adults, the traditional ages where people find on-ramps into science, technology, engineering, and mathematics (STEM) coursework and careers. Our findings raise concerns that MOOCs and similar approaches to online learning can exacerbate rather than reduce disparities in educational outcomes related to socioeconomic status. Copyright © 2015, American Association for the Advancement of Science.

Diving Deep: A Comparative Study of Educator Undergraduate and Graduate Backgrounds and Their Effect on Student Understanding of Engineering and Engineering Careers, Utilizing an Underwater Robotics Program

NASA Astrophysics Data System (ADS)

Scribner, J. Adam

Numerous studies have demonstrated that educators having degrees in their subjects significantly enhances student achievement, particularly in secondary mathematics and science (Chaney, 1995; Goe, 2007; Rowan, Chiang, & Miller, 1997; Wenglinsky, 2000). Yet, science teachers in states that adopt the Next Generation Science Standards will be facilitating classroom engineering activities despite the fact that few have backgrounds in engineering. This quantitative study analyzed ex-post facto WaterBotics (an innovative underwater robotics curriculum for middle and high school students) data to determine if educators having backgrounds in engineering (i.e., undergraduate and graduate degrees in engineering) positively affected student learning on two engineering outcomes: 1) the engineering design process, and 2) understanding of careers in engineering (who engineers are and what engineers do). The results indicated that educators having backgrounds in engineering did not significantly affect student understanding of the engineering design process or careers in engineering when compared to educators having backgrounds in science, mathematics, technology education, or other disciplines. There were, however, statistically significant differences between the groups of educators. Students of educators with backgrounds in technology education had the highest mean score on assessments pertaining to the engineering design process while students of educators with disciplines outside of STEM had the highest mean scores on instruments that assess for student understanding of careers in engineering. This might be due to the fact that educators who lack degrees in engineering but who teach engineering do a better job of "sticking to the script" of engineering curricula.

Engineering Education for a New Era

NASA Astrophysics Data System (ADS)

Ohgaki, Shinichiro

Engineering education is composed of five components, the idea what engineering education ought to be, the knowledge in engineering fields, those who learn engineering, those who teach engineering and the stakeholders in engineering issues. The characteristics of all these five components are changing with the times. When we consider the engineering education for the next era, we should analyze the changes of all five components. Especially the knowledge and tools in engineering fields has been expanding, and advanced science and technology is casting partly a dark shadow on the modern convenient life. Moral rules or ethics for developing new products and engineering systems are now regarded as most important in engineering fields. All those who take the responsibility for engineering education should understand the change of all components in engineering education and have a clear grasp of the essence of engineering for sustainable society.

Telemetry Standards, RCC Standard 106-17. Chapter 24. Message Formats

DTIC Science & Technology

2017-07-01

strength indicator TCP Transmission Control Protocol TE Traffic Engineering TAI International Atomic Time TLV Type-Length-Value TmNS Telemetry...to a specific radio link. TE Queue Status Report 10 This TLV is used by a radio to report Traffic Engineering (TE) queue levels for each of the 8...24.3.2.6 Traffic Engineering Queue Status Report TLV The TE Queue Status Report TLV shall be used to report the queue levels of the eight

"Scholarship of Impact" Framework in Engineering Education Research: Learnings from the Institute for Scholarship on Engineering Education. Research Brief

ERIC Educational Resources Information Center

Lande, Micah; Adams, Robin; Chen, Helen; Currano, Becky; Leifer, Larry

2007-01-01

The Institute for Scholarship on Engineering Education (ISEE) program is one element of the NSF-sponsored Center for the Advancement of Engineering Education (CAEE). Its primary goal is to build a community of engineering education scholars who can think and work across disciplines with an ultimate aim of improving the engineering student…

Engineering Education Research in "European Journal of Engineering Education" and "Journal of Engineering Education": Citation and Reference Discipline Analysis

ERIC Educational Resources Information Center

Wankat, Phillip C.; Williams, Bill; Neto, Pedro

2014-01-01

The authors, citations and content of "European Journal of Engineering Education" ("EJEE") and "Journal of Engineering Education" ("JEE") in 1973 ("JEE," 1975 "EJEE"), 1983, 1993, 2003, and available 2013 issues were analysed. Both journals transitioned from house organs to become…

A status report on the Energy Efficient Engine Project

NASA Technical Reports Server (NTRS)

Macioce, L. E.; Schaefer, J. W.; Saunders, N. T.

1980-01-01

The Energy Efficient Engine (E3) Project is directed at providing, by 1984, the advanced technologies which could be used for a new generation of fuel conservative turbofan engines. This paper summarizes the scope of the entire project and the current status of these efforts. Included is a description of the preliminary designs of the fully developed engines, the potential benefits of these advanced engines, and highlights of some of the component technology efforts conducted to date.

Tungsten fiber reinforced superalloys: A status review

NASA Technical Reports Server (NTRS)

Petrasek, D. W.; Signorelli, R. A.

1981-01-01

Improved performance of heat engines is largely dependent upon maximum cycle temperatures. Tungsten fiber reinforced superalloys (TFRS) are the first of a family of high temperature composites that offer the potential for significantly raising hot component operating temperatures and thus leading to improved heat engine performance. This status review of TFRS research emphasizes the promising property data developed to date, the status of TFRS composite airfoil fabrication technology, and the areas requiring more attention to assure their applicability to hot section components of aircraft gas turbine engines.

Reformulating General Engineering and Biological Systems Engineering Programs at Virginia Tech

ERIC Educational Resources Information Center

Lohani, Vinod K.; Wolfe, Mary Leigh; Wildman, Terry; Mallikarjunan, Kumar; Connor, Jeffrey

2011-01-01

In 2004, a group of engineering and education faculty at Virginia Tech received a major curriculum reform and engineering education research grant under the department-level reform (DLR) program of the NSF. This DLR project laid the foundation of sponsored research in engineering education in the Department of Engineering Education. The DLR…

Committee on Earth Observation Satellites (CEOS) Systems Engineering Office (SEO). Ocean Surface Topography (OST) Workshop, Ruedesheim an Rhein, Germany. [CEOS SEO Status Report

NASA Technical Reports Server (NTRS)

Killough, Brian D., Jr.

2008-01-01

The CEOS Systems Engineering Office will present a 2007 status report of the CEOS constellation process, present a new systems engineering framework, and analysis results from the GEO Societal Benefit Area (SBA) assessment and the OST constellation requirements assessment.

40 CFR 85.515 - Exemption provisions for intermediate age vehicles/engines.

Code of Federal Regulations, 2013 CFR

2013-07-01

... age vehicles/engines. 85.515 Section 85.515 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...-ready status using an OBD scan tool appropriate for the OBD system in the vehicle/engine in question... have reset to a ready status, you must submit an OBD scan tool report showing that with the vehicle...

40 CFR 85.515 - Exemption provisions for intermediate age vehicles/engines.

Code of Federal Regulations, 2012 CFR

2012-07-01

... age vehicles/engines. 85.515 Section 85.515 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...-ready status using an OBD scan tool appropriate for the OBD system in the vehicle/engine in question... have reset to a ready status, you must submit an OBD scan tool report showing that with the vehicle...

40 CFR 85.515 - Exemption provisions for intermediate age vehicles/engines.

Code of Federal Regulations, 2011 CFR

2011-07-01

... age vehicles/engines. 85.515 Section 85.515 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...-ready status using an OBD scan tool appropriate for the OBD system in the vehicle/engine in question... have reset to a ready status, you must submit an OBD scan tool report showing that with the vehicle...

40 CFR 85.515 - Exemption provisions for intermediate age vehicles/engines.

Code of Federal Regulations, 2014 CFR

2014-07-01

... age vehicles/engines. 85.515 Section 85.515 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...-ready status using an OBD scan tool appropriate for the OBD system in the vehicle/engine in question... have reset to a ready status, you must submit an OBD scan tool report showing that with the vehicle...

76 FR 78232 - Monsanto Co.; Determination of Nonregulated Status for Soybean Genetically Engineered To Have a...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-16

... peer review of safety tests, and health effects of genetically modified organisms and glyphosate. APHIS...] Monsanto Co.; Determination of Nonregulated Status for Soybean Genetically Engineered To Have a Modified... that there is reason to believe are plant pests. Such genetically engineered organisms and products are...

The National Technical Association: A Hallmark for Access and Success

NASA Astrophysics Data System (ADS)

Jearld, A., Jr.

2017-12-01

Minority Technical Organizations (MTO) are under-utilized as a valuable resource that can help develop the next generation of scientists and engineers. For over 90 years, the National Technical Association (NTA) (www.ntaonline.org) has been the premiere technical association for scientists, engineers, architects, technologist, educators, and technical business entrepreneurs for people of color, offering professional development, mentoring and awards recognition to technical professionals. NTA and its partners are developing a diverse workforce by emphasizing enhanced access opportunities to skills development for youth among underrepresented STEM populations. Established in 1925 by Charles Summer Duke, the first African American to receive an engineering degree from Harvard University, NTA served as the model organization for more than 40 other minority technical organizations that began forming in the 1970's. NTA has served as consultants to the US government on the status of African Americans in science and engineering. The first technical organization to establish community based technical mentoring programs targeting minorities, NTA shares information and assists institutions in identifying minority talent. Members developed the first science and engineering curriculum at Historically Black Colleges and Universities (HBCU's), and are working to produce more students with geoscience degrees to ensure greater career placement with increased minority participation in the geosciences. NTA addresses the lack of access, support, and the need for networking through the longest running annual conference for technical practitioners of color. A hallmark of NTA has been access and success through inter-organizational collaborations with communities of scholars, highly experienced professionals and students to discuss the definition of what is successful geoscience education, research, and employment.

STEM Education.

PubMed

Xie, Yu; Fang, Michael; Shauman, Kimberlee

2015-08-01

Improving science, technology, engineering, and mathematics (STEM) education, especially for traditionally disadvantaged groups, is widely recognized as pivotal to the U.S.'s long-term economic growth and security. In this article, we review and discuss current research on STEM education in the U.S., drawing on recent research in sociology and related fields. The reviewed literature shows that different social factors affect the two major components of STEM education attainment: (1) attainment of education in general, and (2) attainment of STEM education relative to non-STEM education conditional on educational attainment. Cognitive and social psychological characteristics matter for both major components, as do structural influences at the neighborhood, school, and broader cultural levels. However, while commonly used measures of socioeconomic status (SES) predict the attainment of general education, social psychological factors are more important influences on participation and achievement in STEM versus non-STEM education. Domestically, disparities by family SES, race, and gender persist in STEM education. Internationally, American students lag behind those in some countries with less economic resources. Explanations for group disparities within the U.S. and the mediocre international ranking of US student performance require more research, a task that is best accomplished through interdisciplinary approaches.

STEM Education

PubMed Central

Xie, Yu; Fang, Michael; Shauman, Kimberlee

2015-01-01

Improving science, technology, engineering, and mathematics (STEM) education, especially for traditionally disadvantaged groups, is widely recognized as pivotal to the U.S.’s long-term economic growth and security. In this article, we review and discuss current research on STEM education in the U.S., drawing on recent research in sociology and related fields. The reviewed literature shows that different social factors affect the two major components of STEM education attainment: (1) attainment of education in general, and (2) attainment of STEM education relative to non-STEM education conditional on educational attainment. Cognitive and social psychological characteristics matter for both major components, as do structural influences at the neighborhood, school, and broader cultural levels. However, while commonly used measures of socioeconomic status (SES) predict the attainment of general education, social psychological factors are more important influences on participation and achievement in STEM versus non-STEM education. Domestically, disparities by family SES, race, and gender persist in STEM education. Internationally, American students lag behind those in some countries with less economic resources. Explanations for group disparities within the U.S. and the mediocre international ranking of US student performance require more research, a task that is best accomplished through interdisciplinary approaches. PMID:26778893

Engineering Ethics in the Subject of Engineering History

NASA Astrophysics Data System (ADS)

Isohata, Hiroshi

Engineering ethics has been focused in the field of engineering education since the introduction of accreditation system of engineering education. In this paper, contents of the subject of engineering history are examined and discussed from the viewpoints of education of engineering ethics through a practical case of civil engineering history in a college. For the first step, codes of engineering ethics regulated in various engineering organizations are analyzed and the common contents are extracted to set the requirements for the education of engineering ethics. Then contents of the subject of engineering history are examined according to the requirements. Finally, conditions of engineering history for engineering ethics are discussed.

An Approach to Integrating Health Disparities within Undergraduate Biomedical Engineering Education.

PubMed

Vazquez, Maribel; Marte, Otto; Barba, Joseph; Hubbard, Karen

2017-11-01

Health disparities are preventable differences in the incidence, prevalence and burden of disease among communities targeted by gender, geographic location, ethnicity and/or socio-economic status. While biomedical research has identified partial origin(s) of divergent burden and impact of disease, the innovation needed to eradicate health disparities in the United States requires unique engagement from biomedical engineers. Increasing awareness of the prevalence and consequences of health disparities is particularly attractive to today's undergraduates, who have undauntedly challenged paradigms believed to foster inequality. Here, the Department of Biomedical Engineering at The City College of New York (CCNY) has leveraged its historical mission of access-and-excellence to integrate the study of health disparities into undergraduate BME curricula. This article describes our novel approach in a multiyear study that: (i) Integrated health disparities modules at all levels of the required undergraduate BME curriculum; (ii) Developed opportunities to include impacts of health disparities into undergraduate BME research projects and mentored High School summer STEM training; and (iii) Established health disparities-based challenges as BME capstone design and/or independent entrepreneurship projects. Results illustrate the rising awareness of health disparities among the youngest BMEs-to-be, as well as abundant undergraduate desire to integrate health disparities within BME education and training.

Engineering education research in European Journal of Engineering Education and Journal of Engineering Education: citation and reference discipline analysis

NASA Astrophysics Data System (ADS)

Wankat, Phillip C.; Williams, Bill; Neto, Pedro

2014-01-01

The authors, citations and content of European Journal of Engineering Education (EJEE) and Journal of Engineering Education (JEE) in 1973 (JEE, 1975 EJEE), 1983, 1993, 2003, and available 2013 issues were analysed. Both journals transitioned from house organs to become engineering education research (EER) journals, although JEE transitioned first. In this process the number of citations rose, particularly of education and psychology sources; the percentage of research articles increased markedly as did the number of reference disciplines. The number of papers per issue, the number of single author papers, and the citations of science and engineering sources decreased. EJEE has a very broad geographic spread of authors while JEE authors are mainly US based. A 'silo' mentality where general engineering education researchers do not communicate with EER researchers in different engineering disciplines is evident. There is some danger that EER may develop into a silo that does not communicate with technically oriented engineering professors.

Influences to post-graduation career aspirations and attainment in STEM doctoral candidates and recipients

NASA Astrophysics Data System (ADS)

Barry, Deborah S.

As the realities of the academic job market have forced some PhD recipients to accept less-preferable position types, there has been increasing concerns that these students are not prepared for their careers, especially in STEM fields. However, aside from the labor market, few studies have explored the influences on career aspiration and attainment among doctoral degree holders. This study utilized the socialization theory framework to identify aspects of the doctoral education process that are predictive of the likelihood of certain career aspirations among science and engineering doctoral candidates and career attainment among STEM doctoral recipients by utilizing nationally representative datasets: The National Research Council's Assessment of Research Doctorate Programs student questionnaire and the National Science Foundation's Survey of Earned Doctorates. This study identified field of study, research productivity rank of doctoral programs, primary type of finding doctoral students received, level of satisfaction with research experiences, and their sense of belonging within their doctoral program as factors that predict the likelihood of certain career aspirations compared with a career in education. Doctoral candidates' background characteristics that were significant predictors of career aspirations were gender, marital status, dependent status, race, age, and citizenship status. Further, this study identified participant's field of study, the Carnegie Rank of institutions attended, primary type of funding received, length of time to PhD, gender, marital status, dependent status, race, citizenship stats, and age as factors that predict the likelihood of the career outcomes investigated in this study, including doctoral recipients' employment field and primary work activity.

32 CFR 700.846 - Status of logs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Officers Afloat § 700.846 Status of logs. The deck log, the engineering log, the compass record, the bearing hooks, the engineer's bell book, and any records generated by automated data logging equipment...

Educating the Engineer of 2020: Adapting Engineering Education to the New Century

ERIC Educational Resources Information Center

National Academies Press, 2005

2005-01-01

"Educating the Engineer of 2020" is grounded by the observations, questions, and conclusions presented in the best-selling book "The Engineer of 2020: Visions of Engineering in the New Century." This new book offers recommendations on how to enrich and broaden engineering education so graduates are better prepared to work in a…

Mapping Engineering Concepts for Secondary Level Education. Final Report. Research in Engineering and Technology Education

ERIC Educational Resources Information Center

Daugherty, Jenny L.

2011-01-01

Much of the national attention on science, technology, engineering, and mathematics (STEM) education tends to concentrate on science and mathematics, with its emphasis on standardized test scores. However as the National Academy of Engineering Committee on K-12 Engineering Education stressed, engineering can contribute to the development of an…

Health and economic development: introduction to the symposium.

PubMed

Clay, Joy A; Mirvis, David M

2008-01-01

This symposium explores the role of health as an 'economic engine' in the lower Mississippi River Delta region of the United States. The health as an economic engine model proposes that health is an important and perhaps critical determinant of economic growth and development. This model is the reverse of the more commonly considered paradigm in which economic conditions are major determinants of health status. This reframing of the conventional pathway draws upon an existing and extensive internationally-based body of knowledge, predominantly from research done in Africa and Asia. We suggest, in this symposium, that the health as an economic engine model can also be applied within the United States, particularly in regions that are economically underdeveloped and have poor health. This reframing has significant implications for population health policy as public health advancement can be legitimately argued to be an investment rather than just an expense. Viewing health as an economic engine supports a call to community-based participatory action on the part of policy makers, researchers, and educators to further both public and private investment in health, particularly for children and the poor.

Globalization and Organizational Change: Engineers' Experiences and Their Implications for Engineering Education

ERIC Educational Resources Information Center

Lucena, Juan C.

2006-01-01

The demand for flexible engineers presents significant challenges to engineering education. Among these is the need for engineers to be prepared to understand and deal with organizational change. Yet engineering education and research on engineers have overlooked the impact of organizational change on engineering work. After outlining the impact…

The philosophical and pedagogical underpinnings of Active Learning in Engineering Education

NASA Astrophysics Data System (ADS)

Christie, Michael; de Graaff, Erik

2017-01-01

In this paper the authors draw on three sequential keynote addresses that they gave at Active Learning in Engineering Education (ALE) workshops in Copenhagen (2012), Caxias do Sol (2014) and San Sebastian (2015). Active Learning in Engineering Education is an informal international network of engineering educators dedicated to improving engineering education through active learning (http://www.ale-net.org/). The paper reiterates themes from those keynotes, namely, the philosophical and pedagogical underpinnings of Active Learning in Engineering Education, the scholarly questions that inspire engineering educators to go on improving their practice and exemplary models designed to activate the learning of engineering students. This paper aims to uncover the bedrock of established educational philosophies and theories that define and support active learning. The paper does not claim to present any new or innovative educational theory. There is already a surfeit of them. Rather, the aim is to assist Engineering Educators who wish to research how they can best activate the learning of their students by providing a readable, reasonable and solid underpinning for best practice in this field.

The influence of engineers' training models on ethics and civic education component in engineering courses in Portugal

NASA Astrophysics Data System (ADS)

Monteiro, Fátima; Leite, Carlinda; Rocha, Cristina

2017-03-01

The recognition of the need and importance of including ethical and civic education in engineering courses, as well as the training profile on ethical issues, relies heavily on the engineer's concept and the perception of the engineering action. These views are strongly related to the different engineer education model conceptions and its historical roots. In Portugal, engineer education is done based on two different higher education subsystems, the university and the polytechnic. This study analyses how engineers' educational models, present in the two Portuguese higher education subsystems, influence and are reflected in the importance attached to students' ethic and civic education and in the role that this training plays. Although the data suggest the prevalence of the distinction between the two training models and the corresponding distinction of ethic and civic education that is incorporated in the curricula, it is also noted the existence of mixed feature courses in university education.

[CME-certified online education in Germany - status in ophthalmology 2011].

PubMed

Handzel, D M

2012-06-01

The use of the internet is becoming more and more important in every aspect of daily life, also in professional education. Online education and face-to-face learning have proven to be equally efficient. The aim of this study is to evaluate the amount of online education in the German-speaking internet 2011. The terms "ophthalmology", "online-education", "continuing medical education" and "CME" (partly in German language) were searched by an internet-search engine. The first 100 pages were visited. Pages were evaluated in respect of quality and quantity, authorship and possible influence of sponsors. Only 9 of the first 100 hits had an actual offer for ophthalmology. Nearly all of these were websites of ophthalmological scientific journals. The content represented the same educational format (pictures and text) as in the print issue. CME-certified online education can be found in Germany as offspring of print issues only. The content is identical with educational texts in the print issues. An enlargement of the offer, which uses the possibilities of modern internet technology is highly probable. This estimation is supported by the growing use of the internet and developments on English-speaking websites for online-education. © Georg Thieme Verlag KG Stuttgart · New York.

MCEER, from Earthquake Engineering to Extreme Events | Home Page

Science.gov Websites

Center Report Series Education Education Home Bridge Engineering Guest Speaker Series Connecte²d Teaching CSEE Graduate Student Poster Competition Earthquake Engineering Education in Haiti Earthquakes : FAQ's Engineering Seminar Series K-12 STEM Education National Engineers Week Research Experiences for

Teaching Engineering Habits of Mind in Technology Education

ERIC Educational Resources Information Center

Loveland, Thomas; Dunn, Derrek

2014-01-01

With a new emphasis on the inclusion of engineering content and practices in technology education, attention has focused on what engineering content should be taught and assessed in technology education. The National Academy of Engineering (2010) proposed three general principles for K-12 engineering education in "Standards for K-12…

Influence of educational status on executive function and functional balance in individuals with Parkinson disease.

PubMed

Souza, Carolina de Oliveira; Voos, Mariana Callil; Francato, Débora Valente; Chien, Hsin Fen; Barbosa, Egberto Reis

2013-03-01

This study investigated whether educational status influenced how people with Parkinson disease (PD) performed on Parts A, B, and DELTA of the Trail Making Test (TMT) and on the Berg Balance Scale (BBS). Recent studies have shown that educational status may influence cognitive and motor test performance. We gave the TMT and the BBS to assess executive function and functional balance in 28 people with PD (Hoehn and Yahr score between 2 and 3) and 30 healthy elderly people. Participants reported their number of years of formal education. We divided each group of participants by educational status: low (4 to 10 years of education) or high (≥11 years). In both the PD (P=0.018) and control (P=0.003) groups, participants with low educational status performed worse on the TMT Part B than did those with high educational status. Within the PD group, the less-educated participants scored worse on the BBS than did the more educated (P<0.001); this difference was not significant between the more- and less-educated controls (P=0.976). Whether or not they had PD, less-educated people performed worse than more-educated people on the TMT Part B. Educational status affected executive function, but PD status did not. Among individuals with PD, educational status influenced functional balance.

40 CFR 85.520 - Exemption provisions for outside useful life vehicles/engines.

Code of Federal Regulations, 2012 CFR

2012-07-01

... useful life vehicles/engines. 85.520 Section 85.520 Protection of Environment ENVIRONMENTAL PROTECTION... monitors to not-ready status using an OBD scan tool appropriate for the OBD system in the vehicle/engine in... have reset to a ready status, you must submit an OBD scan tool report showing that with the vehicle...

40 CFR 85.520 - Exemption provisions for outside useful life vehicles/engines.

Code of Federal Regulations, 2014 CFR

2014-07-01

... useful life vehicles/engines. 85.520 Section 85.520 Protection of Environment ENVIRONMENTAL PROTECTION... monitors to not-ready status using an OBD scan tool appropriate for the OBD system in the vehicle/engine in... have reset to a ready status, you must submit an OBD scan tool report showing that with the vehicle...

Correlation of educational status and clinicopathological characteristics of breast cancer: a single center experience.

PubMed

Sarici, Furkan; Babacan, Taner; Buyukhatipoglu, Hakan; Balakan, Ozan; Sever, Ali R; Kertmen, Neyran; Unlu, Ozan; Ates, Ozturk; Diker, Omer; Akin, Serkan; Sunar, Veli; Karakas, Yusuf; Lacin, Sahin; Altundag, Kadri

2016-01-01

Educational status may be an important parameter in assessing breast cancer risk and prognosis. The purpose of this study was to investigate the correlation between the level of education and clinicopathological characteristics of breast cancer, including tumor grade, HER-2 and estrogen receptor (ER) status, tumor size, axillary lymph node involvement and metastasis. The study included 1800 women who were diagnosed with invasive breast cancer during 2005-2013 at Hacettepe University Cancer Institute. Patients were divided into three groups according to their educational status at the time of diagnosis as follows: low (illiterate and elementary school, 5 years or less of education), medium (secondary school and upper secondary school, 6-12 years of education) and high (university level, more than 12 years of education). The associations between educational status and clinicopathologic features of breast cancer at the time of diagnosis were evaluated. In all patient, a significant relationship was found between educational status and T stages (p<0.0001). Patients with higher educational levels were reported to have smaller tumor size regardless to their age and were less likely to have axillary lymph node involvement (p=0.001) or metastasis (p=0.001). A significant correlation was found between educational status and ER positivity in patients over 50 years of age (p=0.03). When the patients of all ages were evaluated, no statistically significant correlation was shown (p=0.27) between educational status and ER positivity. A significant relationship was found between educational status and HER-2 status (p=0.003), regardless of the patients' age. HER-2 positivity increased in patients with low educational status, however this significance was lost in patients over the age of 50 (p=0.1). The relationship between educational status and biological factors in breast cancer are not conclusive as yet, but this particular study revealed that educational status played a major influence in each of the five breast cancer prognostic factors: ER status, HER-2 status, tumor size, lymph node status and metastasis.

Russian engineering education in the era of change

NASA Astrophysics Data System (ADS)

Vladimirovich Pukharenko, Yurii; Vladimirovna Norina, Natalia; Aleksandrovich Norin, Veniamin

2017-03-01

The article investigates modern issues of engineering education in Russia related to introduction of the Bologna system. The author shows that the situation in the education in general gives reasons for concern; the issue of qualitative enrolment of students for engineering specialties escalates; graduates with masters and bachelors' degrees are not in demand in industries or agriculture due to poor training for work in the real life. The main cause of problems in the engineering personnel training in Russia (lacking effective relationship with employers and universities) is discussed. The ways to overcome such issues in quality engineering training were investigated. The author has considered new requirements to engineering education and have briefly compare the Russian model of engineering education with the European and American models. The prospects of the Russian engineering education (transiting to the sixth technological mode) and issues of NBIC-convergent engineering education have been examined.

Analysis of Office/Laboratory Staying Hour and Home Working Hour of Japanese Scientists and Engineers

NASA Astrophysics Data System (ADS)

Ejiri, A.

The second questionnaire for scientists and engineers was carried out in 2007, and status of Japanese scientists and engineers were analyzed and reported. A part of the data was reanalyzed from the viewpoint of work life balance. In particular, office/laboratory staying hour and home working hour were analyzed and dependences on various factors were investigated. It was found that these hours depend on gender, marital status, number of child, employment status and age. In addition, the total hours tend to be kept constant regardless of various factors.

Students' Attitudes towards Interdisciplinary Education: A Course on Interdisciplinary Aspects of Science and Engineering Education

ERIC Educational Resources Information Center

Gero, Aharon

2017-01-01

A course entitled "Science and Engineering Education: Interdisciplinary Aspects" was designed to expose undergraduate students of science and engineering education to the attributes of interdisciplinary education which integrates science and engineering. The core of the course is an interdisciplinary lesson, which each student is…

An Overview of the Literature: Research in P-12 Engineering Education

ERIC Educational Resources Information Center

Mendoza Díaz, Noemi V.; Cox, Monica F.

2012-01-01

This paper presents an extensive overview of preschool to 12th grade (P-12) engineering education literature published between 2001 and 2011. Searches were conducted through education and engineering library engines and databases as well as queries in established publications in engineering education. More than 50 publications were found,…

Development of a Leadership, Policy, and Change Course for Science, Technology, Engineering, and Mathematics Graduate Students

ERIC Educational Resources Information Center

Cox, Monica F.; Berry, Carlotta A.; Smith, Karl A.

2009-01-01

This paper describes a graduate level engineering education course, "Leadership, Policy, and Change in Science, Technology, Engineering, and Mathematics (STEM) Education." Offered for the first time in 2007, the course integrated the perspectives of three instructors representing disciplines of engineering, education, and engineering education.…

Pioneer women in engineering studies: what can we learn from their experiences?

NASA Astrophysics Data System (ADS)

Pardo, P.; Calvet, M. D.; Pons, O.; Martinez, M. C.

2016-11-01

Women's access to higher education in Spain began in the last third of the nineteenth century. However, the full incorporation of women into technical studies did not occur until a century later. This article presents the results of research into the access of the first women to do technical studies in Catalonia (northeast Spain). Data have been collected from 11 technical schools belonging to the Universitat Politècnica de Catalunya (UPC) with the aim of understanding the dynamics of the incorporation of women into these schools between 1851 (foundation of the first engineering school in Catalonia) and 1980. Interviews were conducted with 21 pioneer women who completed their technical studies. Their experiences show how technical schools had to adapt, both physically and culturally, to female students. Finally, the current status of female engineers in Catalonia is compared with the situation in other Western countries. Similarities are found that show the relevance of gender as a social structuring force.

Our Commitment to Reliable Health and Medical Information

MedlinePlus

... 000 visitors world-wide per day. HONcode Toolbar: search engine and checker of the certification status Automatically checks ... HONcode status when browsing health web sites. The search engine indexes only HONcode-certified sites. HONcodeHunt currently includes ...

Ethical Risk Management Education in Engineering: A Systematic Review.

PubMed

Guntzburger, Yoann; Pauchant, Thierry C; Tanguy, Philippe A

2017-04-01

Risk management is certainly one of the most important professional responsibilities of an engineer. As such, this activity needs to be combined with complex ethical reflections, and this requirement should therefore be explicitly integrated in engineering education. In this article, we analyse how this nexus between ethics and risk management is expressed in the engineering education research literature. It was done by reviewing 135 articles published between 1980 and March 1, 2016. These articles have been selected from 21 major journals that specialize in engineering education, engineering ethics and ethics education. Our review suggests that risk management is mostly used as an anecdote or an example when addressing ethics issues in engineering education. Further, it is perceived as an ethical duty or requirement, achieved through rational and technical methods. However, a small number of publications do offer some critical analyses of ethics education in engineering and their implications for ethical risk and safety management. Therefore, we argue in this article that the link between risk management and ethics should be further developed in engineering education in order to promote the progressive change toward more socially and environmentally responsible engineering practices. Several research trends and issues are also identified and discussed in order to support the engineering education community in this project.

Engineering education in Bangladesh - an indicator of economic development

NASA Astrophysics Data System (ADS)

Chowdhury, Harun; Alam, Firoz

2012-05-01

Developing nations including Bangladesh are significantly lagging behind the millennium development target due to the lack of science, technology and engineering education. Bangladesh as a least developing country has only 44 engineers per million people. Its technological education and gross domestic product growth are not collinear. Although limited progress was made in humanities, basic sciences, agriculture and medical sciences, a vast gap is left in technical and engineering education. This paper describes the present condition of engineering education in the country and explores ways to improve engineering education in order to meet the national as well as global skills demand.

Women and Underrepresented Minorities in the it Workforce

NASA Astrophysics Data System (ADS)

Levin, Sharon G.; Stephan, Paula E.

This study examines the composition of the information technology "IT" workforce and focuses on recruitment and retention and how they differ by gender and minority status. Data are from SESTAT, the largest nationally representative sample of college-educated scientists and engineers living in the United States. The data indicate that only about one in three individuals in the IT workforce in 1999 actually had a formal degree in an IT discipline; thus, recruitment from non-IT disciplines plays an important role in determining the size of the IT workforce. Similarly, retention, especially for women and underrepresented minorities, is very important. Indeed, the 1999 IT workforce would have been larger and even more balanced in terms of gender and minority status if women and underrepresented minorities had retention rates similar to that of their white male counterparts. Furthermore, women and underrepresented minorities have different recruitment and retention patterns than do men and whites. These differences persist even after controlling for variables such as family structure, age, citizenship status and field of training, gender, and race-ethnicity.

A Renaissance in Engineering PhD Education

ERIC Educational Resources Information Center

Akay, Adnan

2008-01-01

This paper addresses the role of engineering PhD education and its relationship to innovation and technology, and the need to reconsider how we educate PhD engineers. Much of the effort on engineering education in the last two decades focused on undergraduate education with a few exceptions that relate to master degree programs. Doctoral education…

Dialogue on sustainable development as part of engineering education: the relevance of the Finnish case : commentary on "a national collaboration process: Finnish engineering education for the benefit of people and environment".

PubMed

Geerts, Robert

2013-12-01

Society invests in the education of engineers because it is expected that the works of engineers will bring good results for society. Because the work of engineers is not value free or neutral, it is important that engineers are educated in the important principles of the social sciences and humanities. This education is essential for the awareness and understanding of what is good for society. Therefore the concept of sustainable development should be part of an education in engineering but only when the social sciences are also a part of it.

Paired peer learning through engineering education outreach

NASA Astrophysics Data System (ADS)

Fogg-Rogers, Laura; Lewis, Fay; Edmonds, Juliet

2017-01-01

Undergraduate education incorporating active learning and vicarious experience through education outreach presents a critical opportunity to influence future engineering teaching and practice capabilities. Engineering education outreach activities have been shown to have multiple benefits; increasing interest and engagement with science and engineering for school children, providing teachers with expert contributions to engineering subject knowledge, and developing professional generic skills for engineers such as communication and teamwork. This pilot intervention paired 10 pre-service teachers and 11 student engineers to enact engineering outreach in primary schools, reaching 269 children. A longitudinal mixed methods design was employed to measure change in attitudes and Education Outreach Self-Efficacy in student engineers; alongside attitudes, Teaching Engineering Self-Efficacy and Engineering Subject Knowledge Confidence in pre-service teachers. Highly significant improvements were noted in the pre-service teachers' confidence and self-efficacy, while both the teachers and engineers qualitatively described benefits arising from the paired peer mentor model.

34 CFR Appendix to Part 648 - Academic Areas

Code of Federal Regulations, 2011 CFR

2011-07-01

... Administration and Supervision 13.05Educational/Instructional Media Design 13.06Educational Evaluation, Research, and Statistics 13.07International and Comparative Education 13.08Educational Psychology 13.09Social....27Systems Engineering 14.28Textile Sciences and Engineering 14.29Engineering Design 14.30Engineering...

34 CFR Appendix to Part 648 - Academic Areas

Code of Federal Regulations, 2012 CFR

2012-07-01

... Administration and Supervision 13.05Educational/Instructional Media Design 13.06Educational Evaluation, Research, and Statistics 13.07International and Comparative Education 13.08Educational Psychology 13.09Social....27Systems Engineering 14.28Textile Sciences and Engineering 14.29Engineering Design 14.30Engineering...

34 CFR Appendix to Part 648 - Academic Areas

Code of Federal Regulations, 2014 CFR

2014-07-01

... Administration and Supervision 13.05Educational/Instructional Media Design 13.06Educational Evaluation, Research, and Statistics 13.07International and Comparative Education 13.08Educational Psychology 13.09Social....27Systems Engineering 14.28Textile Sciences and Engineering 14.29Engineering Design 14.30Engineering...

34 CFR Appendix to Part 648 - Academic Areas

Code of Federal Regulations, 2013 CFR

2013-07-01

... Administration and Supervision 13.05Educational/Instructional Media Design 13.06Educational Evaluation, Research, and Statistics 13.07International and Comparative Education 13.08Educational Psychology 13.09Social....27Systems Engineering 14.28Textile Sciences and Engineering 14.29Engineering Design 14.30Engineering...

Feminist Methodologies and Engineering Education Research

ERIC Educational Resources Information Center

Beddoes, Kacey

2013-01-01

This paper introduces feminist methodologies in the context of engineering education research. It builds upon other recent methodology articles in engineering education journals and presents feminist research methodologies as a concrete engineering education setting in which to explore the connections between epistemology, methodology and theory.…

Effects of globalisation on higher engineering education in Germany - current and future demands

NASA Astrophysics Data System (ADS)

Morace, Christophe; May, Dominik; Terkowsky, Claudius; Reynet, Olivier

2017-03-01

Germany is well known around the world for the strength of its economy, its industry and for the 'German model' for higher engineering education based on developing technological skills at a very high level. In this article, we firstly describe the former and present model of engineering education in Germany in a context of the globalisation of the world economy and of higher education, in order to understand how it covers the current demand for engineering resources. Secondly, we analyse the impact of globalisation from a technological perspective. To this end, we describe initiatives for innovation driven by the German federal government and engineering societies, and summarise the first impacts on engineering education and on social competence for engineers. Thirdly, we explore to what extent engineering education in Germany trains engineers in social and intercultural competency to comply with the future demands of the challenge of globalisation.

Engineering Design Education Program for Graduate School

NASA Astrophysics Data System (ADS)

Ohbuchi, Yoshifumi; Iida, Haruhiko

The new educational methods of engineering design have attempted to improve mechanical engineering education for graduate students in a way of the collaboration in education of engineer and designer. The education program is based on the lecture and practical exercises concerning the product design, and has engineering themes and design process themes, i.e. project management, QFD, TRIZ, robust design (Taguchi method) , ergonomics, usability, marketing, conception etc. At final exercise, all students were able to design new product related to their own research theme by applying learned knowledge and techniques. By the method of engineering design education, we have confirmed that graduate students are able to experience technological and creative interest.

Present and Future in Quality Assurance of Engineering Education in Japan

NASA Astrophysics Data System (ADS)

Aoki, Kyosuke; Nozawa, Tsunenori

The quality of engineering education in our country should be assured by the self-assessment of the institution that conducts education. Recent evaluation and/or accreditation are intended to assist and promote such achievement. The certified evaluation and accreditation for colleges of technology and the audit by the Japan Accreditation Board for Engineering Education (JABEE) have been carried out on the engineering education. In this article we will discuss the ways of accreditation of both systems and try to consider future for the quality assurance of the engineering education in Japan.

Identifying barriers to Science, Technology, Society and environment (STSE) educational goals and pedagogy in science education: A case study of UMASS Lowell undergraduate engineering

NASA Astrophysics Data System (ADS)

Phaneuf, Tiffany

The implementation of sustainable development in higher education is a global trend. Engineers, as gatekeepers of technological innovation, confront increasingly complex world issues ranging from economic and social to political and environmental. Recently, a multitude of government reports have argued that solving such complex problems requires changes in the pedagogy of engineering education, such as that prescribed by the Science, Technology, Society, and education (STS) movement that grew out of the environmental movement in the 70s. In STS students are engaged in the community by understanding that scientific progress is innately a sociopolitical process that involves dimensions of power, wealth and responsibility. United States accreditation criteria now demand "the broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context" (ABET Engineering Accreditation Commission 2005). With such emphasis on STS education as necessary to address complex world issues, it is vital to assess the barriers in the traditional engineering curriculum that may inhibit the success of such educational reform. This study identifies barriers to STS goals and pedagogy in post secondary science education by using the Francis College of Engineering at UMASS Lowell as a single case study. The study draws on existing literature to develop a theoretical framework for assessing four hypothesized barriers to STS education in undergraduate engineering. Identification of barriers to STS education in engineering generates a critical reflection of post secondary science education and its role in preparing engineers to be active citizens in shaping a rapidly globalizing world. The study offers policy recommendations for enabling post secondary science education to incorporate STS education into its curriculum.

A Contemporary Preservice Technology Education Program

ERIC Educational Resources Information Center

Flanigan, Rod; Becker, Kurt; Stewardson, Gary

2012-01-01

In order to teach engineering education, today's engineering and technology education teachers must be equipped with lesson plans to teach engineering design, among other principles, to the 6th-12th grade levels. At Utah State University (USU), curriculum has been developed for preservice engineering and technology education teachers that…

Impacts of a Flat World on Engineering Education

ERIC Educational Resources Information Center

Chatziioanou, Alypios

2006-01-01

This paper discusses the changes to engineering education introduced through the accelerated engineering-related industrial growth in Asian and other developing countries. While the demand for engineering services is increasing, these nations educate a large number of engineers themselves and many are providing lower-cost alternatives for…

MTR CONTROL ROOM WITH CONTROL CONSOLE AND STATUS READOUTS ALONG ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MTR CONTROL ROOM WITH CONTROL CONSOLE AND STATUS READOUTS ALONG WALL. WORKERS MAKE ELECTRICAL AND OTHER CONNECTIONS. INL NEGATIVE NO. 4289. Unknown Photographer, 2/26/1952 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

40 CFR 79.4 - Requirement of registration.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) in a research, development, or test status; (ii) sold to automobile, engine, or component manufacturers for research, development, or test purposes; or (iii) sold to automobile manufacturers for factory... research, development, or test status or (ii) sold to petroleum, automobile, engine, or component...

40 CFR 79.4 - Requirement of registration.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) in a research, development, or test status; (ii) sold to automobile, engine, or component manufacturers for research, development, or test purposes; or (iii) sold to automobile manufacturers for factory... research, development, or test status or (ii) sold to petroleum, automobile, engine, or component...

40 CFR 79.4 - Requirement of registration.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) in a research, development, or test status; (ii) sold to automobile, engine, or component manufacturers for research, development, or test purposes; or (iii) sold to automobile manufacturers for factory... research, development, or test status or (ii) sold to petroleum, automobile, engine, or component...

40 CFR 79.4 - Requirement of registration.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) in a research, development, or test status; (ii) sold to automobile, engine, or component manufacturers for research, development, or test purposes; or (iii) sold to automobile manufacturers for factory... research, development, or test status or (ii) sold to petroleum, automobile, engine, or component...

40 CFR 79.4 - Requirement of registration.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) in a research, development, or test status; (ii) sold to automobile, engine, or component manufacturers for research, development, or test purposes; or (iii) sold to automobile manufacturers for factory... research, development, or test status or (ii) sold to petroleum, automobile, engine, or component...

Examination of engineering design teacher self-efficacy and knowledge base in secondary technology education and engineering-related courses

NASA Astrophysics Data System (ADS)

Vessel, Kanika Nicole

2011-12-01

There is an increasing demand for individuals with engineering education and skills of varying fields in everyday life. With the proper education students of high-needs schools can help meet the demand for a highly skilled and educated workforce. Researchers have assumed the supply and demand has not been met within the engineering workforce as a result of students' collegiate educational experiences, which are impacted by experiences in K-12 education. Although factors outside of the classroom contribute to the inability of universities to meet the increasing demand for the engineering workforce, most noted by researchers is the academic unpreparedness of freshman engineering students. The unpreparedness of entering freshman engineering students is a result of K-12 classroom experiences. This draws attention not only to the quality and competence of teachers present in the K-12 classroom, but the type of engineering instruction these students are receiving. This paper was an effort to systematically address one of the more direct and immediate factors impacting freshman engineering candidates, the quality of secondary engineering educators. Engineers develop new ideas using the engineering design process, which is taught at the collegiate level, and has been argued to be the best approach to teach technological literacy to all K-12 students. However, it is of importance to investigate whether technology educators have the knowledge and understanding of engineering design, how to transfer that knowledge in the classroom to students through instructional strategies, and their perception of their ability to do that. Therefore, the purpose of this study is to show the need for examining the degree to which technology and non-technology educators are implementing elements of engineering design in the curriculum.

EngineSim: Turbojet Engine Simulator Adapted for High School Classroom Use

NASA Technical Reports Server (NTRS)

Petersen, Ruth A.

2001-01-01

EngineSim is an interactive educational computer program that allows users to explore the effect of engine operation on total aircraft performance. The software is supported by a basic propulsion web site called the Beginner's Guide to Propulsion, which includes educator-created, web-based activities for the classroom use of EngineSim. In addition, educators can schedule videoconferencing workshops in which EngineSim's creator demonstrates the software and discusses its use in the educational setting. This software is a product of NASA Glenn Research Center's Learning Technologies Project, an educational outreach initiative within the High Performance Computing and Communications Program.

Necessity and Role of Introductory Education in the Engineering Education in University Level

NASA Astrophysics Data System (ADS)

Endo, Ginro

In the faculties of “Engineering” or “Science and Technology” of many universities, faculty stuffs are teaching the academic foundations of technology to the students. From the standing point of the students in engineering course, first their study should be started to be accustomed to the new studying situations in their universities or colleges, and then the students proceed to be adjusted to study engineering specialty. The former is or should be realized through liberal arts education in university level and extracurricular activities in the universities. However, the latter needs special education schemes. In the past, educational courses in universities were clearly divided into a liberal arts period and a specialty education period in Japan. In that system, the students in engineering were accustomed to the specialty education after their promotion to their engineering curriculum. At present, the students in the faculties must be engrossed in the study of engineering from their first year of the university education, because the science and technology have been very rapidly progressed and have made increase in the level and quantity of engineering education. In this article, the author discusses how should the faculty give the scholastic ability to the students in engineering from the early years of the university courses, and introduces the case studies of introductory education (or the first-year education) in the engineering education that has been done in a faculty to that the author belongs.

Important Engineering and Technology Concepts and Skills for All High School Students in the United States: Comparing Perceptions of Engineering Educators and High School Teachers

ERIC Educational Resources Information Center

Hacker, Michael; Barak, Moshe

2017-01-01

Engineering and technology education (ETE) are receiving increased attention as components of STEM education. Curriculum development should be informed by perceptions of academic engineering educators (AEEs) and classroom technology teachers (CTTs) as both groups educate students to succeed in the technological world. The purpose of this study was…

Technology of interdisciplinary open-ended designing in engineering education

NASA Astrophysics Data System (ADS)

Isaev, A. P.; Plotnikov, L. V.; Fomin, N. I.

2017-11-01

Author’s technology of interdisciplinary open-ended engineering is presented in this article. This technology is an integrated teaching method that significantly increases the practical component in the educational program. Author’s technology creates the conditions to overcome the shortcomings in the engineering education. The basic ideas of the technology of open-ended engineering, experience of their implementation in higher education and the author’s vision of the teaching technology are examined in the article. The main stages of development process of the author’s technology of open-ended engineering to prepare students (bachelor) of technical profile are presented in the article. Complex of the methodological tools and procedures is shown in the article. This complex is the basis of the developed training technology that is used in educational process in higher school of engineering (UrFU). The organizational model of the technology of open-ended engineering is presented. Organizational model integrates the functions in the creation and implementation of all educational program. Analysis of the characteristics of educational activity of students working on author’s technology of interdisciplinary open-ended engineering is presented. Intermediate results of the application of author’s technology in the educational process of the engineering undergraduate are shown.

Maternal education and child nutritional status in Bolivia: finding the links.

PubMed

Frost, Michelle Bellessa; Forste, Renata; Haas, David W

2005-01-01

This study models various pathways linking maternal education and child nutritional status in Bolivia, using a national sample of children. Pathways examined include socioeconomic status, health knowledge, modern attitudes towards health care, female autonomy, and reproductive behavior. The data come from the 1998 Bolivia Demographic and Health Survey. Logistic regression results suggest that socioeconomic factors are the most important pathways linking maternal education and child nutritional status, and that modern attitudes about health care also explain the impact of education. Health care knowledge accounts for less of the effect of maternal education on child nutritional status, with autonomy being the weakest pathway. Other pathways, such as reproductive behaviors, appear to influence nutritional status independent of maternal education. Overall, the pathways examined accounted for 60 percent of the effect of maternal education on child nutritional status.

An Alternative Perspective for Malaysian Engineering Education: A Review from Year 2000-2012

ERIC Educational Resources Information Center

Jayarajah, Kamaleswaran; Saat, Rohaida Mohd; Rauf, Rose Amnah Abdul

2013-01-01

The purpose of this study is to explore the research base of engineering education in the "Journal of Engineering Education" ("JEE") through an analysis review of articles for a 12-year period, from 2000 to 2012. The research base review focuses on identifying five characteristics of engineering education: (a) temporal…

Engineering a General Education Program: Designing Mechanical Engineering General Education Courses

ERIC Educational Resources Information Center

Fagette, Paul; Chen, Shih-Jiun; Baran, George R.; Samuel, Solomon P.; Kiani, Mohammad F.

2013-01-01

The Department of Mechanical Engineering at our institution created two engineering courses for the General Education Program that count towards second level general science credit (traditional science courses are first level). The courses were designed for the general student population based upon the requirements of our General Education Program…

The Philosophical and Pedagogical Underpinnings of Active Learning in Engineering Education

ERIC Educational Resources Information Center

Christie, Michael; de Graaff, Erik

2017-01-01

In this paper the authors draw on three sequential keynote addresses that they gave at Active Learning in Engineering Education (ALE) workshops in Copenhagen (2012), Caxias do Sol (2014) and San Sebastian (2015). Active Learning in Engineering Education is an informal international network of engineering educators dedicated to improving…

Surmounting the Barriers: Ethnic Diversity in Engineering Education: Summary of a Workshop

ERIC Educational Resources Information Center

National Academies Press, 2014

2014-01-01

"Surmounting the Barriers: Ethnic Diversity in Engineering Education" is the summary of a workshop held in September 2013 to take a fresh look at the impediments to greater diversification in engineering education. The workshop brought together educators in engineering from two- and four-year colleges and staff members from the three…

Engineering and Technology Education for the 21st Century. A Report from the Regional Colloquium on Engineering and Technology Education for the 21st Century (Nakhon Ratchasima, Thailand, February 11-14, 1997).

ERIC Educational Resources Information Center

Kettle, Kevin C., Ed.

This colloquium was held with the purposes of promoting cooperation and collaboration among engineering education institutions in the Mekong subregion and establishing the linkage with engineering institutions in France; to promote university-industry collaboration in the field of engineering and technology education; to establish a network of…

Results and status of the NASA aircraft engine emission reduction technology programs

NASA Technical Reports Server (NTRS)

Jones, R. E.; Diehl, L. A.; Petrash, D. A.; Grobman, J.

1978-01-01

The results of an aircraft engine emission reduction study are reviewed in detail. The capability of combustor concepts to produce significantly lower levels of exhaust emissions than present production combustors was evaluated. The development status of each combustor concept is discussed relative to its potential for implementation in aircraft engines. Also, the ability of these combustor concepts to achieve proposed NME and NCE EPA standards is discussed.

Research and Innovation of Engineering Education in Europe the contribution of SEFI

NASA Astrophysics Data System (ADS)

Graaff, Erik De; Borri, Claudio

The roots of engineering education lie in the workplace. It was not until the 19th century that higher engineering education moved to a more scholarly environment. True to its origins, research in the applied sciences never aimed at pure understanding alone. The goal of engineering investigations has always been to devise solutions to practice problems with a mixture of design, construction and innovation. If the establishing of a research tradition in engineering has taken quite a long time, the time needed to apply an academic mode of thinking to the approach to teaching and learning has been much longer. In fact, most of the design choices concerning the curricula in higher engineering education were made based on intuition, rather than on insight, until well over the half of the last century. Aiming at to support the development of engineering education in Europe, in 1973 the European Society of Engineering Education was established (labelled SEFI according to the French acronym Société. Européenne pour la Formation des Ingénieurs). Presently the society represents 196 institutional members. SEFI promotes cooperation between higher engineering education institutions and other scientific and international bodies on issues of research and development in Engineering Education, for instance through participating in European network projects such as the SOCRATES Thematic Network “TREE” (Teaching and Research in Engineering Education in Europe). SEFI is also engaged in policy development regarding engineering education publishing statements regarding issues like the Bologna process and the proposed European Institute of Technology. In the future SEFI aims to consolidate and strengthen its role in the European arena and to represent Europe on the Global stage.

The Influence of Engineers' Training Models on Ethics and Civic Education Component in Engineering Courses in Portugal

ERIC Educational Resources Information Center

Monteiro, Fátima; Leite, Carlinda; Rocha, Cristina

2017-01-01

The recognition of the need and importance of including ethical and civic education in engineering courses, as well as the training profile on ethical issues, relies heavily on the engineer's concept and the perception of the engineering action. These views are strongly related to the different engineer education model conceptions and its…

Chemical Reaction Engineering: Current Status and Future Directions.

ERIC Educational Resources Information Center

Dudukovic, M. P.

1987-01-01

Describes Chemical Reaction Engineering (CRE) as the discipline that quantifies the interplay of transport phenomena and kinetics in relating reactor performance to operating conditions and input variables. Addresses the current status of CRE in both academic and industrial settings and outlines future trends. (TW)

Does educational status affect a patient's behavior toward erectile dysfunction?

PubMed

Salonia, Andrea; Abdollah, Firas; Gallina, Andrea; Pellucchi, Federico; Castillejos Molina, Ricardo Alonso; Maccagnano, Carmen; Rocchini, Lorenzo; Zanni, Giuseppe; Rigatti, Patrizio; Montorsi, Francesco

2008-08-01

Educational status has been investigated rarely as a potential factor affecting the behavior of patients with new onset erectile dysfunction (ED) toward seeking first medical help and subsequent compliance with prescribed phosphodiesterase type 5 inhibitor (PDE5) therapy. To test whether the educational status of patients with new onset ED and naïve to PDE5 therapy may have a significant impact on the delay before seeking first medical help (DSH) and compliance with the suggested PDE5. Assessing DSH and compliance with PDE5 in new onset ED patients according to their educational status by means of detailed logistic regression analyses. Data from 302 consecutive patients with new onset ED and naïve to PDE5s were comprehensively analyzed. Patients were segregated according to their educational status into low (elementary and/or secondary school education) and high (high school and/or university degrees) educational levels. Complete data were available for 231 assessable patients. Univariate (UVA) and multivariate (MVA) logistic regression analyses addressed the association between educational status and DSH after adjusting for age, relationship status, and Sexual Health Inventory for Men score. Likewise, UVA and MVA were performed to test the association between educational status and patient compliance with PDE5 at the 9-month median follow-up. Median DSH was 24 months (range 1-350; mean 38.1 +/- 42.8). The lower the educational status, the shorter the DSH (P = 0.03). In contrast, a significantly (P < 0.0001) greater proportion of patients with a higher educational status showed compliance with the suggested PDE5 at the 9-month follow-up. Overall, educational status was not an independent predictor of either DSH or patient compliance with PDE5 therapy. After adjusting for other variables, our findings suggest that in new onset ED patients, educational status does not independently affect the DSH and patient compliance with PDE5 therapy.

First-year engineering students' views of the nature of engineering

NASA Astrophysics Data System (ADS)

Karatas, Faik O.

The changing nature of engineering problems and new challenges that result from globalization and new ways of doing business have triggered calls for a revolutionary shift in engineering education. To respond to these challenges, the engineering education paradigm has been revised by adding more design and humanities/social sciences components to it. Philosophy, sociology, and history of engineering are more often cited as a major part of engineering education in this movement. Research on the nature of engineering (NOE), which is derived from philosophy, sociology, and the history of engineering, could have as much potential impact on engineering education as research on the nature of science (NOS) has had on science education. Thus, it is surprising that there has been no noteworthy research on this topic. The purpose of this study is to describe and determine first-year engineering students' views of the NOE and how these students differentiate engineering from science. In this research, an open-ended Views of the Nature of Engineering questionnaire (VNOE) was employed to collect baseline data. Semi-structured interviews based on the VNOE questionnaire were conducted with the second cohort of the participants. Data analysis was guided by a traditional phenomenographic approach, which is a branch of the hermeneutic tradition, coupled to constant comparison technique. The results of this study indicated that the participants' overall views of the nature of engineering were not ill-developed, but rather unarticulated. Moreover, the relationship between engineering and science was considered unidirectional rather than bidirectional. The results of this study could be used to inform engineering educators, first-year engineering coordinators, and policy makers as well as serving as the base for further research and potential implications for future first-year and K-12 engineering education.

Combined Engineering Education Based on Regional Needs Aiming for Design Education

NASA Astrophysics Data System (ADS)

Hama, Katsumi; Yaegashi, Kosuke; Kobayashi, Junya

The importance of design education that cultivates integrated competences has been suggested in higher educational institutions in fields of engineering in relation to quality assurance of engineering education. However, it is also pointed out to lay stress on cooperative education in collaboration with the community because there is a limit to correspond to the design education only by a group of educational institutions. This paper reports the outline of the practical engineering education, which is executing in the project learning of Hakodate National College of Technology, based on regional needs and the result of the activity as a model of education program for fusion and combination.

Engineering Knowledge and Student Development: An Institutional and Pedagogical Critique of Engineering Education

NASA Astrophysics Data System (ADS)

Tang, Xiaofeng

Educators have recommended the integration of engineering and the liberal arts as a promising educational model to prepare young engineers for global economic, environmental, sociotechnical, and ethical challenges. Drawing upon philosophy of technology, engineering studies, and educational psychology, this dissertation examines diverse visions and strategies for integrating engineering and liberal education and explores their impacts on students' intellectual and moral development. Based on archival research, interviews, and participant observation, the dissertation presents in-depth case studies of three educational initiatives that seek to blend engineering with the humanities, social sciences, and arts: Harvey Mudd College, the Picker Engineering Program at Smith College, and the Programs in Design and Innovation at Rensselaer Polytechnic Institute. The research finds that learning engineering in a liberal arts context increases students' sense of "owning" their education and contributes to their communication, teamwork, and other non-technical professional skills. In addition, opportunities for extensive liberal arts learning in the three cases encourage some students to pursue alternative, less technocentric approaches to engineering. Nevertheless, the case studies suggest that the epistemological differences between the engineering and liberal arts instructors help maintain a technical/social dualism among most students. Furthermore, the dissertation argues a "hidden curriculum," which reinforces the dominant ideology in the engineering profession, persists in the integrated programs and prevents the students from reflecting on the broad social context of engineering and critically examining the assumptions upheld in the engineering profession.

Technology Education Benefits from the Inclusion of Pre-Engineering Education

ERIC Educational Resources Information Center

Rogers, Steve; Rogers, George E.

2005-01-01

Technology education is being taught today in almost every high school and middle school in America. Over 1000 technology education departments are now including pre-engineering education in their programs. According to these authors, the time has come for the profession to agree that including pre-engineering education in technology education…

Educating Engineers: Designing for the Future of the Field. Book Highlights

ERIC Educational Resources Information Center

Sheppard, Sheri D.; Macatangay, Kelly; Colby, Anne; Sullivan, William M.

2008-01-01

This multi-year study of undergraduate engineering education in the United States initiated questions about the alignment of engineering programs with the demands of current professional engineering practice. While describing engineering education from within the classroom and the lab, the report on the study offers new possibilities for teaching…

Engineering the Future: Embedding Engineering Permanently across the School-University Interface

ERIC Educational Resources Information Center

MacBride, G.; Hayward, E. L.; Hayward, G.; Spencer, E.; Ekevall, E.; Magill, J.; Bryce, A. C.; Stimpson, B.

2010-01-01

This paper describes the design, implementation, and evaluation of an educational program. Engineering the Future (EtF) sought to promote a permanent, informed awareness within the school community of high-level engineering by embedding key aspects of engineering within the education curriculum. The Scottish education system is used for a case…

Faculty's Perceptions of Teaching Ethics and Leadership in Engineering Education

ERIC Educational Resources Information Center

AlSagheer, Abdullah; Al-Sagheer, Areej

2011-01-01

This paper addressed the faculty's perception of engineering ethics and leadership training. The study looks into the present state of and methodologies for teaching engineering ethics and leadership and aims to determine the faculty's perception of an identified gap in this aspect of engineering education. Engineering education has strong ethics…

Educational Encounters of the Third Kind.

PubMed

Génova, Gonzalo; González, M Rosario

2017-12-01

An engineer who becomes an educator in a school of software engineering has the mission to teach how to design and construct software systems, therein applying his or her knowledge and expertise. However, due to their engineering background, engineers may forget that educating a person is not the same as designing a machine, since a machine has a well-defined goal, whilst a person is capable to self-propose his or her own objectives. The ethical implications are clear: educating a free person must leave space for creativity and self-determination in his or her own discovery of the way towards personal and professional fulfillment, which cannot consist only in achieving goals selected by others. We present here an argument that is applicable to most fields of engineering. However, the dis-analogy between educating students and programming robots may have a particular appeal to software engineers and computer scientists. We think the consideration of three different stages in the educational process may be useful to engineers when they act as educators. We claim that the three stages (instructing, training and mentoring) are essential to engineering education. In particular, education is incomplete if the third stage is not reached. Moreover, mentoring (the third stage aimed at developing creativity and self-determination) is incompatible with an educational assessment framework that considers the goals of the engineer are always given by others. In our view, then, an integral education is not only beyond programming the behavior of students, but also beyond having them reach those given goals.

Closing the gap in systems engineering education for the space industry

NASA Technical Reports Server (NTRS)

Carlisle, R.

1986-01-01

The education of system engineers with emphasis on designing systems for space applications is discussed. System engineers determine the functional requirements, performance needs, and implementation procedures for proposed systems and their education is based on aeronautics and mathematics. Recommendations from industry for improving the curriculum of system engineers at the undergraduate and graduate levels are provided. The assistance provided by companies to the education of system engineers is examined.

Viewgraph description of Penn State's Propulsion Engineering Research Center: Activity highlights and future plans

NASA Technical Reports Server (NTRS)

Merkle, Charles L.

1991-01-01

Viewgraphs are presented that describe the progress and status of Penn State's Propulsion Engineering Research Center. The Center was established in Jul. 1988 by a grant from NASA's University Space Engineering Research Centers Program. After two and one-half years of operation, some 16 faculty are participating, and the Center is supporting 39 graduate students plus 18 undergraduates. In reviewing the Center's status, long-term plans and goals are reviewed and then the present status of the Center and the highlights and accomplishments of the past year are summarized. An overview of plans for the upcoming year are presented.

Anticipating Change: An Exploratory Analysis of Teachers' Conceptions of Engineering in an Era of Science Education Reform

ERIC Educational Resources Information Center

Sengupta-Irving, Tesha; Mercado, Janet

2017-01-01

While integrating engineering into science education is not new in the United States, technology and engineering have not been well emphasized in the preparation and professional development of science teachers. Recent science education reforms integrate science and engineering throughout K-12 education, making it imperative to explore the…

Past/Forward Policy-Making: Transforming Chinese Engineering Education since the Reform and Opening-Up

ERIC Educational Resources Information Center

Zhu, Qin; Jesiek, Brent K.; Gong, Yu

2015-01-01

Although engineering education has played important roles in China's growing power and influence on the world stage, engineering education policy since the Reform and Opening-up in the late 1970s has not been well documented in current English-language scholarship. Informed by historical and sociological studies of education, engineering and…

Math, Science and Engineering Education: A National Need. Hearing Before the Subcommittee on Postsecondary Education of the Committee on Education and Labor. House of Representatives, One Hundred First Congress, First Session (Kansas City, MO, May 1, 1989).

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Education and Labor.

This is a report on the hearing for solutions to the problems in science, mathematics, and engineering education at the postsecondary level. Topics of prepared statements and the testifiers are: (1) educating scientists and engineers (Daryl E. Chubin); (2) science and engineering education needs viewed from the perspectives of the national…

Status of Research in Biomedical Engineering 1968.

ERIC Educational Resources Information Center

National Inst. of General Medical Sciences (NIH), Bethesda, MD.

This status report is divided into eight sections. The first four represent the classical engineering or building aspects of bioengineering and deal with biomedical instrumentation, prosthetics, man-machine systems and computer and information systems. The next three sections are related to the scientific, intellectual and academic influence of…

Integration of Engineering Education by High School Teachers to Meet Standards in the Physics Classroom

NASA Astrophysics Data System (ADS)

Kersten, Jennifer Anna

In recent years there has been increasing interest in engineering education at the K-12 level, which has resulted in states adopting engineering standards as a part of their academic science standards. From a national perspective, the basis for research into engineering education at the K-12 level is the belief that it is of benefit to student learning, including to "improve student learning and achievement in science and mathematics; increase awareness of engineering and the work of engineers; boost youth interest in pursuing engineering as a career; and increase the technological literacy of all students" (National Research Council, 2009a, p. 1). The above has led to a need to understand how teachers are currently implementing engineering education in their classrooms. High school physics teachers have a history of implementing engineering design projects in their classrooms, thus providing an appropriate setting to look for evidence of quality engineering education at the high school level. Understanding the characteristics of quality engineering integration can inform curricular and professional development efforts for teachers asked to implement engineering in their classrooms. Thus, the question that guided this study is: How, and to what extent, do physics teachers represent quality engineering in a physics unit focused on engineering? A case study research design was implemented for this project. Three high school physics teachers were participants in this study focused on the integration of engineering education into the physics classroom. The data collected included observations, interviews, and classroom documents that were analyzed using the Framework for Quality K-12 Engineering Education (Moore, Glancy et al., 2013). The results provided information about the areas of the K-12 engineering framework addressed during these engineering design projects, and detailed the quality of these lesson components. The results indicate that all of the design projects contained components of the indicators central to engineering education, although with varied degrees of success. In addition, each design project contained aspects important to the development of students' understanding of engineering and that promote important professional skills used by engineers. The implications of this work are discussed at the teacher, school, professional development, and policy levels.

Australian Engineering Educators' Attitudes towards Aboriginal Cultures and Perspectives

ERIC Educational Resources Information Center

Goldfinch, Thomas; Prpic, Juliana Kaya; Jolly, Lesley; Leigh, Elyssebeth; Kennedy, Jade

2017-01-01

In Australia, representation of Aboriginal populations within the engineering profession is very low despite participation targets set by Government departments, professional bodies and Universities. Progressing the Aboriginal inclusion agenda within Australian Engineering Education requires a clearer understanding of engineering educators'…

Foreign Experience in Training Future Engineering Educators for Modeling Technological Processes

ERIC Educational Resources Information Center

Bokhonko, Yevhen

2017-01-01

The article deals with the study of foreign experience in training engineering educators for modeling technological processes. It has been stated that engineering education is a field that is being dramatically developed taking into account the occurring changes in educational paradigms, global higher education space, national higher education…

Broadening engineering education: bringing the community in : commentary on "social responsibility in French engineering education: a historical and sociological analysis".

PubMed

Conlon, Eddie

2013-12-01

Two issues of particular interest in the Irish context are (1) the motivation for broadening engineering education to include the humanities, and an emphasis on social responsibility and (2) the process by which broadening can take place. Greater community engagement, arising from a socially-driven model of engineering education, is necessary if engineering practice is to move beyond its present captivity by corporate interests.

African American Adolescent Female Identification with Engineering and Participation in Engineering Education

ERIC Educational Resources Information Center

Cornick, Shayla L.

2012-01-01

Experiences that females have during middle and high school have been found to influence the perceptions that they have of their ability to be successful as an engineer and the value that they place on participating in engineering education. Engineering education continues to suffer from a lack of female participation. Several efforts have been…

The predicament of aeronautical engineering education and what we can do about it

NASA Technical Reports Server (NTRS)

Bryson, A. E., Jr.

1975-01-01

An analysis of the aeronautical engineering situation and the relationship to the U.S. aircraft industry is presented. Some of the problems encountered in undergraduate aeronautical engineering education are explained. A reorganization of the educational structure for aeronautical engineering is proposed. The human factors aspect of aeronautical engineering discipline is described.

Engineering Employment Characteristics. Engineering Education and Practice in the United States.

ERIC Educational Resources Information Center

National Academy of Sciences - National Research Council, Washington, DC. Commission on Engineering and Technical Systems.

This panel report was prepared as part of the study of engineering education and practice conducted under the guidance of the National Research Council's Committee on the Education and Utilization of the Engineer. The panel's goal was to provide a data base that describes the engineering work force, its main activities, capabilities, and principal…

A systematic approach to engineering ethics education.

PubMed

Li, Jessica; Fu, Shengli

2012-06-01

Engineering ethics education is a complex field characterized by dynamic topics and diverse students, which results in significant challenges for engineering ethics educators. The purpose of this paper is to introduce a systematic approach to determine what to teach and how to teach in an ethics curriculum. This is a topic that has not been adequately addressed in the engineering ethics literature. This systematic approach provides a method to: (1) develop a context-specific engineering ethics curriculum using the Delphi technique, a process-driven research method; and (2) identify appropriate delivery strategies and instructional strategies using an instructional design model. This approach considers the context-specific needs of different engineering disciplines in ethics education and leverages the collaboration of engineering professors, practicing engineers, engineering graduate students, ethics scholars, and instructional design experts. The proposed approach is most suitable for a department, a discipline/field or a professional society. The approach helps to enhance learning outcomes and to facilitate ethics education curriculum development as part of the regular engineering curriculum.

Educating Engineers for World Development. Proceedings of a World Congress (Estes Park, Colorado, June 10-12, 1975).

ERIC Educational Resources Information Center

English, J. Morley, Ed.; Collins, W. Leighton, Ed.

This report comprises papers commissioned for the World Congress on Educating Engineers for World Development, sponsored by the International Division of the American Society for Engineering Education, and held in Colorado in June 1975. The purpose of the Congress was to bring about significant changes in the education of engineers and in the…

STEM Career Cluster Engineering and Technology Education pathway in Georgia: Perceptions of Georgia engineering and technology education high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education survey

NASA Astrophysics Data System (ADS)

Crenshaw, Mark VanBuren

This study examined the perceptions held by Georgia Science, Technology, Engineering, and Mathematics (STEM) Career Cluster Engineering and Technology Education (ETE) high school pathway teachers and Georgia's Career, Technical and Agriculture Education (CTAE) administrators regarding the ETE pathway and its effect on implementation within their district and schools. It provides strategies for ETE teaching methods, curriculum content, STEM integration, and how to improve the ETE pathway program of study. Current teaching and curricular trends were examined in ETE as well as the role ETE should play as related to STEM education. The study, using the Characteristics of Engineering and Technology Education Survey, was conducted to answer the following research questions: (a) Is there a significant difference in the perception of ETE teaching methodology between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? (b) Is there a significant difference in the perception of ETE curriculum content between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? (c) Is there a significant difference in the perception of STEM integration in the ETE high school pathway between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? and (d) Is there a significant difference in the perception of how to improve the ETE high school pathway between Georgia ETE high school teachers and CTAE administrators as measured by the Characteristics of Engineering and Technology Education Survey? Suggestions for further research also were offered.

Paired Peer Learning through Engineering Education Outreach

ERIC Educational Resources Information Center

Fogg-Rogers, Laura; Lewis, Fay; Edmonds, Juliet

2017-01-01

Undergraduate education incorporating active learning and vicarious experience through education outreach presents a critical opportunity to influence future engineering teaching and practice capabilities. Engineering education outreach activities have been shown to have multiple benefits; increasing interest and engagement with science and…

First-year Engineering Education with the Creative Electrical Engineering Laboratory

NASA Astrophysics Data System (ADS)

Tsukamoto, Takehiko; Sugito, Tetsumasa; Ozeki, Osamu; Ushiroda, Sumio

The Department of Electrical and Electronic Engineering in Toyota National College of Technology has put great emphasis on fundamental subjects. We introduced the creative electrical engineering laboratory into the first-year engineering education since 1998. The laboratory concentrates on the practice exercise. The final questionnaire of students showed that our first-year education is very effective to promote students motivation and their scholastic ability in engineering.

Development status of the Vulcain engine

NASA Astrophysics Data System (ADS)

Gastal, J.; Eury, S.; Borromee, J.; Micewicz, J. B.

1993-06-01

The present account of the current status of the Ariane V launch vehicle's Vulcain first-stage cryofueled bipropellant engine gives attention to the Vulcain's overall configuration, as well as to its component designs, operational flowcharts, turbopump and combustion chamber performance verification trials, and program management responsibilities. Prospective development efforts currently envisioned are noted.

78 FR 13302 - Syngenta Biotechnology, Inc.; Determination of Nonregulated Status of Corn Genetically Engineered...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-27

...] Syngenta Biotechnology, Inc.; Determination of Nonregulated Status of Corn Genetically Engineered for... are advising the public of our determination that a corn line developed by the Syngenta Biotechnology... evaluation of data submitted by Syngenta Biotechnology, Inc., in its petition for a determination of...

Industrial training approach using GPM P5 Standard for Sustainability in Project Management: a framework for sustainability competencies in the 21st century

NASA Astrophysics Data System (ADS)

Johan, Kartina; Mohd Turan, Faiz

2016-11-01

Malaysian Engineering Accreditation (Engineering Programme Accreditation Manual, 2007) requires all bachelor degree in engineering programmes to incorporate a minimum of two months industrial training in order for the programme to be accredited by the council. The industrial training has the objective to provide students on the insights of being an engineer at the workplace hence increasing their knowledge in employability skills prior to graduation. However the current structure of industrial training is not able to inculcate good leadership ability and prepare students with sustainability competencies needed in the era of Sustainable Development (SD). This paper aims to study project management methodology as a framework to create a training pathway in industrial training for students in engineering programs using Green Project Management (GPM) P5 standard for sustainability in project management. The framework involves students as interns, supervisors from both university and industry and also participation from NonProfit Organisation (NPO). The framework focus on the development of the student's competency in employability skills, lean leadership and sustainability competencies using experiential learning approach. Deliverables of the framework include internship report, professional sustainability report using GPM P5 standard and competency assessment. The post-industrial phase of the framework is constructed for students to be assessed collaboratively by the university, industry and the sustainability practitioner in the country. The ability for the interns to act as a change agent in sustainability practices is measured by the competency assessment and the quality of the sustainability report. The framework support the call for developing holistic students based on Malaysian Education Blueprint (Higher Education) 2015-2025 and address the gap between the statuses of engineering qualification to the sustainability competencies in the 21st century in particular by achieving the Sustainability Graduates (SG) attributes outlined in the framework.

Educating Civil Engineers for Developing Countries

ERIC Educational Resources Information Center

Stanley, D.

1974-01-01

Based on engineering teaching experience in Africa and Asia, ideas are presented on educating civil engineers for developing countries, especially those in Africa. Some of the problems facing educational planners, teachers, and students are addressed, including responsibilities of a newly graduated civil engineer, curriculum development, and…

New Perspectives: Technology Teacher Education and Engineering Design

ERIC Educational Resources Information Center

Hill, Roger B.

2006-01-01

Initiatives to integrate engineering design within the field of technology education are increasingly evident. The National Science Foundation has encouraged and funded opportunities for technology educators and engineers to work collaboratively. However, perspectives regarding the role engineering should play within the discipline of technology…

An Online Graduate Requirements Engineering Course

ERIC Educational Resources Information Center

Kilicay-Ergin, N.; Laplante, P. A.

2013-01-01

Requirements engineering is one of the fundamental knowledge areas in software and systems engineering graduate curricula. Recent changes in educational delivery and student demographics have created new challenges for requirements engineering education. In particular, there is an increasing demand for online education for working professionals.…

Enhancing Engineering Education through Engineering Management

ERIC Educational Resources Information Center

Pence, Kenneth R.; Rowe, Christopher J.

2012-01-01

Engineering Management courses are added to a traditional engineering curriculum to enhance the value of an undergraduate's engineering degree. A four-year engineering degree often leaves graduates lacking in business and management acumen. Engineering management education covers topics enhancing the value of new graduates by teaching management…

Engineering Ethics Education : Its Necessity, Objectives, Methods, Current State, and Challenges

NASA Astrophysics Data System (ADS)

Fudano, Jun

The importance of engineering ethics education has become widely recognized in the industrialized countries including Japan. This paper examines the background against which engineering ethics education is required, and reviews its objectives, methods, and challenges, as well as its current state. In pointing out important issues associated with the apparent acceptance and quantitative development of ethics education, especially after the establishment of the Japan Accreditation Board for Engineering Education in 1999, the author stresses that the most serious problem is the lack of common understanding on the objectives of engineering ethics education. As a strategy to improve the situation, the so-called “Ethics-across-the-Curriculum” approach is introduced. The author also claims that business/organization ethics which is consistent with engineering ethics should be promoted in Japan.

Feminist methodologies and engineering education research

NASA Astrophysics Data System (ADS)

Beddoes, Kacey

2013-03-01

This paper introduces feminist methodologies in the context of engineering education research. It builds upon other recent methodology articles in engineering education journals and presents feminist research methodologies as a concrete engineering education setting in which to explore the connections between epistemology, methodology and theory. The paper begins with a literature review that covers a broad range of topics featured in the literature on feminist methodologies. Next, data from interviews with engineering educators and researchers who have engaged with feminist methodologies are presented. The ways in which feminist methodologies shape their research topics, questions, frameworks of analysis, methods, practices and reporting are each discussed. The challenges and barriers they have faced are then discussed. Finally, the benefits of further and broader engagement with feminist methodologies within the engineering education community are identified.

Career preference theory: A grounded theory describing the effects of undergraduate career preferences on student persistence in engineering

NASA Astrophysics Data System (ADS)

Dettinger, Karen Marie

This study used grounded theory in a case study at a large public research university to develop a theory about how the culture in engineering education affects students with varying interests and backgrounds. According to Career Preference Theory, the engineering education system has evolved to meet the needs of one type of student, the Physical Scientist. While this educational process serves to develop the next generation of engineering faculty members, the majority of engineering undergraduates go on to work as practicing engineers, and are far removed from working as physical scientists. According to Career Preference Theory, students with a history of success in mathematics and sciences, and a focus on career, enter engineering. These students, who actually have a wide range of interests and values, each begin seeking an identity as a practicing engineer. Career Preference Theory is developed around a concept, Career Identity Type, that describes five different types of engineering students: Pragmatic, Physical Scientist, "Social" Scientist, Designer, and Educator. According to the theory, each student must develop an identity within the engineering education system if they are to persist in engineering. However, the current undergraduate engineering education system has evolved in such a way that it meets only the needs of the Physical Scientist. Pragmatic students are also likely to succeed because they tend to be extremely goal-focused and maintain a focus on the rewards they will receive once they graduate with an engineering degree. However, "Social" Scientists, who value interpersonal relationships and giving back to society; Designers, who value integrating ideas across disciplines to create aesthetically pleasing and useful products; and Educators, who have a strong desire to give back to society by working with young people, must make some connection between these values and a future engineering career if they are to persist in engineering. According to Career Preference Theory, "Social" Scientists, Designers, and Educators are likely to leave engineering, while Pragmatics and Physical Scientists are likely to persist.

Engineering Education in K-12 Schools

NASA Astrophysics Data System (ADS)

Spence, Anne

2013-03-01

Engineers rely on physicists as well as other scientists and mathematicians to explain the world in which we live. Engineers take this knowledge of the world and use it to create the world that never was. The teaching of physics and other sciences as well as mathematics is critical to maintaining our national workforce. Science and mathematics education are inherently different, however, from engineering education. Engineering educators seek to enable students to develop the habits of mind critical for innovation. Through understanding of the engineering design process and how it differs from the scientific method, students can apply problem and project based learning to solve the challenges facing society today. In this talk, I will discuss the elements critical to a solid K-12 engineering education that integrates science and mathematics to solve challenges throughout the world.

Research opportunities with compact accelerator-driven neutron sources

NASA Astrophysics Data System (ADS)

Anderson, I. S.; Andreani, C.; Carpenter, J. M.; Festa, G.; Gorini, G.; Loong, C.-K.; Senesi, R.

2016-10-01

Since the discovery of the neutron in 1932 neutron beams have been used in a very broad range of applications, As an aging fleet of nuclear reactor sources is retired the use of compact accelerator-driven neutron sources (CANS) is becoming more prevalent. CANS are playing a significant and expanding role in research and development in science and engineering, as well as in education and training. In the realm of multidisciplinary applications, CANS offer opportunities over a wide range of technical utilization, from interrogation of civil structures to medical therapy to cultural heritage study. This paper aims to provide the first comprehensive overview of the history, current status of operation, and ongoing development of CANS worldwide. The basic physics and engineering regarding neutron production by accelerators, target-moderator systems, and beam line instrumentation are introduced, followed by an extensive discussion of various evolving applications currently exploited at CANS.

Development of Engineering Design Education in the Department of Mechanical Engineering at Kanazawa Technical College

NASA Astrophysics Data System (ADS)

Yamada, Hirofumi; Ten-Nichi, Michio; Mathui, Hirosi; Nakamura, Akizi

This paper introduces a method of the engineering design education for college of technology mechanical engineering students. In order to teach the practical engineering design, the MIL-STD-499A process is adapted and improved upon for a Mechatronics hands-on lesson used as the MOT method. The educational results in five years indicate that knowledge of the engineering management is useful for college students in learning engineering design. Portfolio for lessons and the hypothesis method also have better effects on the understanding of the engineering specialty.

Comparison of Engineering Education in Norway and China

ERIC Educational Resources Information Center

Sun, Xiaodong; Jia, Yanrui; Li, Zhenchun; Song, Yu

2018-01-01

The Washington Accord is an internationally recognized agreement in engineering education of undergraduates. China joined the agreement as the 18th member country in 2016. The exploration technology and engineering major of China University of Petroleum has obtained the professional certification from international engineering education system and…

Analysis of Engineering Content within Technology Education Programs

ERIC Educational Resources Information Center

Fantz, Todd D.; Katsioloudis, Petros J.

2011-01-01

In order to effectively teach engineering, technology teachers need to be taught engineering content, concepts, and related pedagogy. Some researchers posit that technology education programs may not have enough content to prepare technology teachers to teach engineering design. Certain technology teacher education programs have responded by…

Active Learning in Engineering Education: A (Re)Introduction

ERIC Educational Resources Information Center

Lima, Rui M.; Andersson, Pernille Hammar; Saalman, Elisabeth

2017-01-01

The informal network "Active Learning in Engineering Education" (ALE) has been promoting Active Learning since 2001. ALE creates opportunity for practitioners and researchers of engineering education to collaboratively learn how to foster learning of engineering students. The activities in ALE are centred on the vision that learners…

Soaring to New Heights in Engineering Education. Frontiers in Education (FIE) Conference Proceedings (42nd, Seattle, Washington, October 3-6, 2012)

ERIC Educational Resources Information Center

Frontiers in Education Conference (MS), 2012

2012-01-01

The lifetime of Frontiers in Education (FIE), 42 years and counting, has been a time of many innovations in engineering and computing education. The FIE Conference has become the premiere conference for presentation and discussion of excellent educational research and innovative curricula in engineering education. This accomplishment would not…

Practical Strategy on the Subject of “Science and Ethics” for Overcoming Hybrid Engineering Ethics Education

NASA Astrophysics Data System (ADS)

Yasui, Yoshiaki

The issue of economic globalization and JABEE (Japan Accreditation Board for Engineering Education) mean that education on engineering ethics has now become increasingly important for science-engineering students who will become the next generation of engineers. This is clearly indicated when engineers are made professionally responsible for various unfortunate accidents that happen during daily life in society. Learning hybrid engineering ethics is an essential part of the education of the humanities and sciences. This paper treats the contents for the subject of “Science and Ethics” drawing on several years of practice and the fruits of studying science and engineering ethics at the faculty of science-engineering in university. This paper can be considered to be a practical strategy to the formation of morality.

Educating the humanitarian engineer.

PubMed

Passino, Kevin M

2009-12-01

The creation of new technologies that serve humanity holds the potential to help end global poverty. Unfortunately, relatively little is done in engineering education to support engineers' humanitarian efforts. Here, various strategies are introduced to augment the teaching of engineering ethics with the goal of encouraging engineers to serve as effective volunteers for community service. First, codes of ethics, moral frameworks, and comparative analysis of professional service standards lay the foundation for expectations for voluntary service in the engineering profession. Second, standard coverage of global issues in engineering ethics educates humanitarian engineers about aspects of the community that influence technical design constraints encountered in practice. Sample assignments on volunteerism are provided, including a prototypical design problem that integrates community constraints into a technical design problem in a novel way. Third, it is shown how extracurricular engineering organizations can provide a theory-practice approach to education in volunteerism. Sample completed projects are described for both undergraduates and graduate students. The student organization approach is contrasted with the service-learning approach. Finally, long-term goals for establishing better infrastructure are identified for educating the humanitarian engineer in the university, and supporting life-long activities of humanitarian engineers.

Automotive Stirling Engine Development Program

NASA Technical Reports Server (NTRS)

Nightingale, N.; Ernst, W.; Richey, A.; Simetkosky, M.; Smith, G.; Rohdenburg, C.; Antonelli, M. (Editor)

1983-01-01

Program status and plans are discussed for component and technology development; reference engine system design, the upgraded Mod 1 engine; industry test and evaluation; and product assurance. Four current Mod 1 engines reached a total of 2523 operational hours, while two upgraded engines accumulated 166 hours.

About, for, in or through Entrepreneurship in Engineering Education

ERIC Educational Resources Information Center

Mäkimurto-Koivumaa, Soili; Belt, Pekka

2016-01-01

Engineering competences form a potential basis for entrepreneurship. There are pressures to find new approaches to entrepreneurship education (EE) in engineering education, as the traditional analytical logic of engineering does not match the modern view of entrepreneurship. Since the previous models do not give tangible enough tools on how to…

The incontinence impact questionnaire: results in an Italian female population stratified by educational status.

PubMed

Costantini, Elisabetta; Lazzeri, Massimo; Bini, Vittorio; Del Zingaro, Michele; Kocjiancic, Ervin; Porena, Massimo

2009-01-01

To determine the response rate to the self-administered Incontinence Impact Questionnaire (IIQ) in an Italian female population. 172 consecutive patients referred to the urogynecological department of an urban university teaching hospital were invited to answer the self-administered IIQ. Correlations were investigated between answer rate, age, educational status and urogenital pathology. Only 41.6% of patients with low educational status answered all questions compared with 47.6 and 58% of medium and high educational status (p = 0.038 and p = 0.011 respectively). Mean patient age correlated inversely with educational status (rho = -0.443; p < 0.0001) and directly with non-response rate (rho = 0.207; p = 0.007). The non-response rate was correlated significantly and inversely with educational status only in continent patients (rho = -0.254; p = 0.037) and in patients with pelvic organ prolapse (rho = -0.256; p = 0.017). The IIQ answer rate correlated directly with educational status in an Italian female population. Copyright (c) 2009 S. Karger AG, Basel.

Status of the NEXT Ion Engine Wear Test

NASA Technical Reports Server (NTRS)

Soulas, George C.; Domonkos, Matthew T.; Kamhawi, Hani; Patterson, Michael J.; Gardner, Michael M.

2003-01-01

The status of the NEXT 2000 hour wear test is presented. This test is being conducted with a 40 cm engineering model ion engine, designated EM1, at a beam current higher than listed on the NEXT throttle table. Pretest performance assessments demonstrated that EM1 satisfies all thruster performance requirements. As of 7/3/03, the ion engine has accumulated 406 hours of operation at a thruster input power of 6.9 kW. Overall ion engine performance, which includes thrust, thruster input power, specific impulse, and thrust efficiency, has been steady to date with no indications of performance degradation. Images of the downstream discharge cathode, neutralizer, and accelerator aperture surfaces have exhibited no significant erosion to date.

Comparison of cross culture engineering ethics training using the simulator for engineering ethics education.

PubMed

Chung, Christopher

2015-04-01

This paper describes the use and analysis of the Simulator for Engineering Ethics Education (SEEE) to perform cross culture engineering ethics training and analysis. Details describing the first generation and second generation development of the SEEE are published in Chung and Alfred, Science and Engineering Ethics, vol. 15, 2009 and Alfred and Chung, Science and Engineering Ethics, vol. 18, 2012. In this effort, a group of far eastern educated students operated the simulator in the instructional, training, scenario, and evaluation modes. The pre and post treatment performance of these students were compared to U.S. Educated students. Analysis of the performance indicated that the far eastern educated student increased their level of knowledge 23.7 percent while U.S. educated students increased their level of knowledge by 39.3 percent.

Engineering Ethics Education Having Reflected Various Values and a Global Code of Ethics

NASA Astrophysics Data System (ADS)

Kanemitsu, Hidekazu

At the present day, a movement trying to establish a global code of ethics for science and engineering is in activity. The author overviews the context of this movement, and examines the possibility of engineering ethics education which uses global code of ethics. In this paper, the engineering ethics education which uses code of ethics in general will be considered, and an expected function of global code of ethics will be also. Engineering ethics education in the new century should be aimed to share the values among different countries and cultures. To use global code of ethics as a tool for such education, the code should include various values, especially Asian values which engineering ethics has paid little attention to.

Engineering education and a lifetime of learning

NASA Technical Reports Server (NTRS)

Eisley, J. (Editor)

1974-01-01

The result of an eleven-week study by the National Aeronautics and Space Administration (NASA) and the American Society of Engineering Education is presented. The study was the ninth of a series of programs. The purposes of the programs were: (1) to introduce engineering school faculty members to system design and to a particular approach to teaching system design, (2) to introduce engineering faculty to NASA and to a specific NASA center, and (3) to produce a study of use to NASA and to the participants. The story was concerned with engineering education in the U.S., and concentrated upon undergraduate education and teaching, although this bias was not meant to imply that research and graduate study are less important to engineering education.

Third cycle university studies in Europe in the field of agricultural engineering and in the emerging discipline of biosystems engineering.

PubMed

Ayuga, F; Briassoulis, D; Aguado, P; Farkas, I; Griepentrog, H; Lorencowicz, E

2010-01-01

The main objectives of European Thematic Network entitled 'Education and Research in Agricultural for Biosystems Engineering in Europe (ERABEE-TN)' is to initiate and contribute to the structural development and the assurance of the quality assessment of the emerging discipline of Biosystems Engineering in Europe. ERABEE is co-financed by the European Community in the framework of the LLP Programme. The partnership consists of 35 participants from 27 Erasmus countries, out of which 33 are Higher Education Area Institutions (EDU) and 2 are Student Associations (ASS). 13 Erasmus participants (e.g. Thematic Networks, Professional Associations, and Institutions from Brazil, Croatia, Russia and Serbia) are also involved in the Thematic Network through synergies. To date, very few Biosystems Engineering programs exist in Europe and those that are initiated are at a very primitive stage of development. The innovative and novel goal of the Thematic Network is to promote this critical transition, which requires major restructuring in Europe, exploiting along this direction the outcomes accomplished by its predecessor; the USAEE-TN (University Studies in Agricultural Engineering in Europe). It also aims at enhancing the compatibility among the new programmes of Biosystems Engineering, aiding their recognition and accreditation at European and International level and facilitating greater mobility of skilled personnel, researchers and students. One of the technical objectives of ERABEE is dealing with mapping and promoting the third cycle studies (including European PhDs) and supporting the integration of research at the 1st and 2nd cycle regarding European Biosystems Engineering university studies. During the winter 2008 - spring 2009 period, members of ERABEE conducted a survey on the contemporary status of doctoral studies in Europe, and on a possible scheme for promotion of cooperation and synergies in the framework of the third cycle of studies and the European Doctorate in Biosystems Engineering in Europe. This paper presents the results of the survey. The legal regulations and their extent on the different countries concerning the third cycle are presented, along with the current structure of third cycle studies. The evolution and adaptation to the new EHEA in each country is also considered. Information was also gathered on the emerging topics of the Biosystems Engineering field and how these topics could be addressed by the new doctoral programmes at the European level.

Positioning Technology and Engineering Education as a Key Force in STEM Education

ERIC Educational Resources Information Center

Strimel, Greg; Grubbs, Michael E.

2016-01-01

As the presence of engineering content and practices increases in science education, the distinction between the two fields of science and technology education becomes even more vague than previously theorized. Furthermore, the addition of engineering to the title of the profession raises the question of the true aim of technology education. As a…

A Strategy for Sourcing Continuing Engineering Education

ERIC Educational Resources Information Center

Baukal, Charles E., Jr.

2012-01-01

Many are calling for increased continuing education for engineers, but few details are provided as to how to source that education. This paper recommends a strategy for sourcing continuing engineering education (CEE). Providers of CEE are categorized here as internal (the organization itself), external (universities, professional/trade…

Would Increasing Engineering Literacies Enable Untapped Opportunities for STEM Education?

ERIC Educational Resources Information Center

Redman, Christine

2017-01-01

The main focus here is to examine the benefits of defining and developing an engineering curriculum for elementary schools. Like many other international educational systems, Australian educational settings have been seeking to effectively implement science, technology, engineering, and mathematics (STEM) education. However, current assumptions…

The Pre-Engineering Curriculum Proceedings of the Annual CSU Conference on Innovation in Engineering Education. (1st, San Jose, California, April 26, 1991).

ERIC Educational Resources Information Center

California State Univ., Engineering Council for Teaching and Learning.

This document provides the keynote address and papers delivered at the 1991 California State University Conference on Innovation in Engineering Education which focused on the pre-engineering curriculum. The conference was convened as a collaborative effort by faculty to address the following issues in engineering education: (1) the attraction and…

Implementing Sustainable Engineering Education through POPBL

NASA Astrophysics Data System (ADS)

Lioe, D. X.; Subhashini, G. K.

2013-06-01

This paper presents the implementation of sustainable engineering education to undergraduate student in Asia Pacific University of Technology and Innovation, Malaysia (APU) through Project-Oriented Problem Based Learning (POPBL). Sustainable engineering has already been the paramount term where it is no longer limited to environment, but also to the entire lifetime of the individual engineer. To inculcate every engineering individual with sustainability, education is the way to start off.

PROCESS WATER BUILDING, TRA605. CONTROL PANEL SUPPLIES STATUS INDICATORS. CARD ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PROCESS WATER BUILDING, TRA-605. CONTROL PANEL SUPPLIES STATUS INDICATORS. CARD IN LOWER RIGHT WAS INSERTED BY INL PHOTOGRAPHER TO COVER AN OBSOLETE SECURITY RESTRICTION ON ORIGINAL NEGATIVE. INL NEGATIVE NO. 4219. Unknown Photographer, 2/13/1952 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Industrial Education. "Small Engines".

ERIC Educational Resources Information Center

Parma City School District, OH.

Part of a series of curriculum guides dealing with industrial education in junior high schools, this guide provides the student with information and manipulative experiences on small gasoline engines. Included are sections on shop adjustment, safety, small engines, internal combustion, engine construction, four stroke engines, two stroke engines,…

TMT in the Astronomical Landscape of the 2020s

NASA Astrophysics Data System (ADS)

Dickinson, Mark; Inami, Hanae

2014-07-01

Thirty Meter Telescope Observatory and NOAO will host the second TMT Science Forum at Loews Ventana Canyon Resort in Tucson, Arizona. The TMT Science Forum is an an annual gathering of astronomers, educators, and observatory staff, who meet to explore TMT science, instrumentation, observatory operations, archiving and data processing, astronomy education, and science, technology, engineering, and math (STEM) issues. It is an opportunity for astronomers from the international TMT partners and from the US-at-large community to learn about the observatory status, discuss and plan cutting-edge science, establish collaborations, and to help shape the future of TMT. One important theme for this year's Forum will be the synergy between TMT and other facilities in the post-2020 astronomical landscape. There will be plenary sessions, an instrumentation workshop, topical science sessions and meetings of the TMT International Science Development Teams (ISDTs).

Status Configurations, Military Service and Higher Education

ERIC Educational Resources Information Center

Wang, Lin; Elder, Glen H., Jr.; Spence, Naomi J.

2012-01-01

The U.S. Armed Forces offer educational and training benefits as incentives for service. This study investigates the influence of status configurations on military enlistment and their link to greater educational opportunity. Three statuses (socioeconomic status of origin, cognitive ability and academic performance) have particular relevance for…

Progress in reforming chemical engineering education.

PubMed

Wankat, Phillip C

2013-01-01

Three successful historical reforms of chemical engineering education were the triumph of chemical engineering over industrial chemistry, the engineering science revolution, and Engineering Criteria 2000. Current attempts to change teaching methods have relied heavily on dissemination of the results of engineering-education research that show superior student learning with active learning methods. Although slow dissemination of education research results is probably a contributing cause to the slowness of reform, two other causes are likely much more significant. First, teaching is the primary interest of only approximately one-half of engineering faculty. Second, the vast majority of engineering faculty have no training in teaching, but trained professors are on average better teachers. Significant progress in reform will occur if organizations with leverage-National Science Foundation, through CAREER grants, and the Engineering Accreditation Commission of ABET-use that leverage to require faculty to be trained in pedagogy.

Childhood Social Status in Society and School: Implications for the Transition to Higher Levels of Education

ERIC Educational Resources Information Center

Almquist, Ylva; Modin, Bitte; Ostberg, Viveca

2010-01-01

While research into educational inequalities emphasizes childhood socio-economic status, this study adds another dimension of status into the analysis; namely, the child's own social position among its peers. The aim was to examine whether socio-economic status and peer status can both be linked to educational transitions and, if so, whether they…

Evaluating the Effectiveness of Integrative STEM Education: Teacher and Administrator Professional Development

ERIC Educational Resources Information Center

Havice, William; Havice, Pamela; Waugaman, Chelsea; Walker, Kristin

2018-01-01

The integration of science, technology, engineering, and mathematics (STEM) education, also referred to as integrative STEM education, is a relatively new interdisciplinary teaching technique that incorporates an engineering design-based learning approach with mathematics, science, technology, and engineering education (Sanders, 2010, 2012, 2013;…

Integration of Sustainability in Engineering Education: Why Is PBL an Answer?

ERIC Educational Resources Information Center

Guerra, Aida

2017-01-01

Purpose: Education for sustainable development (ESD) is one of the challenges engineering education currently faces. Engineering education needs to revise and change its curriculum to integrate ESD principles and knowledge. Problem based learning (PBL) has been one of the main learning pedagogies used to integrate sustainability in engineering…

Elementary Students' Engagement in Failure-Prone Engineering Design Tasks

ERIC Educational Resources Information Center

Andrews, Chelsea Joy

2017-01-01

Although engineering education has been practiced at the undergraduate level for over a century, only fairly recently has the field broadened to include the elementary level; the pre-college division of the American Society of Engineering Education was established in 2003. As a result, while recent education standards require engineering in…

The Landscape of Prek-12 Engineering Online Resources for Teachers: Global Trends

ERIC Educational Resources Information Center

Bagiati, Aikaterini; Yoon, So Yoon; Evangelou, Demetra; Magana, Alejandra; Kaloustian, Garene; Zhu, Jiabin

2015-01-01

Background: The newly formed discipline of engineering education is addressing the need to (a) enhance STEM education for precollege students and (b) identify optimum ways to introduce engineering content starting, perhaps, from the early ages. Introducing engineering at the Prekindergarten through 12th grade (PreK-12) education level requires…

Online Data Resources in Chemical Engineering Education: Impact of the Uncertainty Concept for Thermophysical Properties

ERIC Educational Resources Information Center

Kim, Sun Hyung; Kang, Jeong Won; Kroenlein, Kenneth; Magee, Joseph W.; Diky, Vladimir; Muzny, Chris D.; Kazakov, Andrei F.; Chirico, Robert D.; Frenkel, Michael

2013-01-01

We review the concept of uncertainty for thermophysical properties and its critical impact for engineering applications in the core courses of chemical engineering education. To facilitate the translation of developments to engineering education, we employ NIST Web Thermo Tables to furnish properties data with their associated expanded…

A Literature Review of Indexing and Searching Techniques Implementation in Educational Search Engines

ERIC Educational Resources Information Center

El Guemmat, Kamal; Ouahabi, Sara

2018-01-01

The objective of this article is to analyze the searching and indexing techniques of educational search engines' implementation while treating future challenges. Educational search engines could greatly help in the effectiveness of e-learning if used correctly. However, these engines have several gaps which influence the performance of e-learning…

Engineering Education for Leadership in the 21st Century.

ERIC Educational Resources Information Center

Wirasinghe, Chan

The engineering profession and, consequently, the education process for engineers must respond to several new realities in order to be successful in the 21st century. Some aspects of the new reality that are relevant to engineering education are as follows: the globalization of commerce; the information revolution; innovations in technology; the…

The Technology of Forming of Innovative Content for Engineering Education

ERIC Educational Resources Information Center

Kayumova, Lilija A.; Savva, Lubov I.; Soldatchenko, Aleksandr L.; Sirazetdinov, Rustem M.; Akhmetov, Linar G.

2016-01-01

The relevance of the study is conditioned by the modernization of engineering education aimed at specialists' training to solve engineering and economic problems effectively. The goal of the paper is to develop the technology of the innovative content's formation for engineering education. The leading method to the study of this problem is a…

Fiber reinforced superalloys

NASA Technical Reports Server (NTRS)

Petrasek, Donald W.; Signorelli, Robert A.; Caulfield, Thomas; Tien, John K.

1987-01-01

Improved performance of heat engines is largely dependent upon maximum cycle temperatures. Tungsten fiber reinforced superalloys (TFRS) are the first of a family of high temperature composites that offer the potential for significantly raising hot component operating temperatures and thus leading to improved heat engine performance. This status review of TFRS research emphasizes the promising property data developed to date, the status of TFRS composite airfoil fabrication technology, and the areas requiring more attention to assure their applicability to hot section components of aircraft gas turbine engines.

Researching primary engineering education: UK perspectives, an exploratory study

NASA Astrophysics Data System (ADS)

Clark, Robin; Andrews, Jane

2010-10-01

This paper draws attention to the findings of an exploratory study that critically identified and analysed relevant perceptions of elementary level engineering education within the UK. Utilising an approach based upon grounded theory methodology, 30 participants including teachers, representatives of government bodies and non-profit providers of primary level engineering initiatives were interviewed. Three main concepts were identified during the analysis of findings, each relevant to primary engineering education. These were pedagogic issues, exposure to engineering within the curriculum and children's interest. The paper concludes that the opportunity to make a real difference to children's education by stimulating their engineering imagination suggests this subject area is of particular value.

Science identity possibilities: a look into Blackness, masculinities, and economic power relations

NASA Astrophysics Data System (ADS)

Rosa, Katemari

2018-02-01

This forum paper dialogues with Sheron Mark's A bit of both science and economics: a non-traditional STEM identity narrative. In her paper, she discusses the development of a Science, Technology, Engineering, and Mathematics (STEM) identity by a young African American male during an informal STEM for Social Justice Program. Here, the discussion focuses on Black masculinities, identity formation, and the role of science educators in making STEM fields a welcoming place for young Black men. Drawing from Mark's data and discussion, this paper is a dialogue between science identity possibilities in the United States and in Brazil when we look at the intersections of race, gender, and socioeconomic status. Using the shared colonial past of both countries a connection is established to address race relations within science education. The main argument in this paper is that racism can no longer be denied and dismissed by the science education community worldwide and that intersectional approaches are needed to face this issue.

Education and Research Laboratories as a Means of Enhancing the Quality of Professional Engineering Education in Design and Production of Composite Parts

ERIC Educational Resources Information Center

Khaliulin, Valentin I.; Gershtein, Elena M.

2016-01-01

Relevance of this research is determined by quality improvement of professional engineering education. The purpose of this paper is to offer practical recommendations for those interested in establishment of education and research laboratories as a means of enhancing the quality of professional engineering education in design and production of…

Engineering Ethics Education: A Comparative Study of Japan and Malaysia.

PubMed

Balakrishnan, Balamuralithara; Tochinai, Fumihiko; Kanemitsu, Hidekazu

2018-03-22

This paper reports the findings of a comparative study in which students' perceived attainment of the objectives of an engineering ethics education and their attitude towards engineering ethics were investigated and compared. The investigation was carried out in Japan and Malaysia, involving 163 and 108 engineering undergraduates respectively. The research method used was based on a survey in which respondents were sent a questionnaire to elicit relevant data. Both descriptive and inferential statistical analyses were performed on the data. The results of the analyses showed that the attainment of the objectives of engineering ethics education and students' attitude towards socio-ethical issues in engineering were significantly higher and positive among Japanese engineering students compared to Malaysian engineering students. Such findings suggest that a well-structured, integrated, and innovative pedagogy for teaching ethics will have an impact on the students' attainment of ethics education objectives and their attitude towards engineering ethics. As such, the research findings serve as a cornerstone to which the current practice of teaching and learning of engineering ethics education can be examined more critically, such that further improvements can be made to the existing curriculum that can help produce engineers that have strong moral and ethical characters.

Methodology discourses as boundary work in the construction of engineering education.

PubMed

Beddoes, Kacey

2014-04-01

Engineering education research is a new field that emerged in the social sciences over the past 10 years. This analysis of engineering education research demonstrates that methodology discourses have played a central role in the construction and development of the field of engineering education, and that they have done so primarily through boundary work. This article thus contributes to science and technology studies literature by examining the role of methodology discourses in an emerging social science field. I begin with an overview of engineering education research before situating the case within relevant bodies of literature on methodology discourses and boundary work. I then identify two methodology discourses--rigor and methodological diversity--and discuss how they contribute to the construction and development of engineering education research. The article concludes with a discussion of how the findings relate to prior research on methodology discourses and boundary work and implications for future research.

Effects of unique biomedical education programs for engineers: REDEEM and ESTEEM projects.

PubMed

Matsuki, Noriaki; Takeda, Motohiro; Yamano, Masahiro; Imai, Yohsuke; Ishikawa, Takuji; Yamaguchi, Takami

2009-06-01

Current engineering applications in the medical arena are extremely progressive. However, it is rather difficult for medical doctors and engineers to discuss issues because they do not always understand one another's jargon or ways of thinking. Ideally, medical engineers should become acquainted with medicine, and engineers should be able to understand how medical doctors think. Tohoku University in Japan has managed a number of unique reeducation programs for working engineers. Recurrent Education for the Development of Engineering Enhanced Medicine has been offered as a basic learning course since 2004, and Education through Synergetic Training for Engineering Enhanced Medicine has been offered as an advanced learning course since 2006. These programs, which were developed especially for engineers, consist of interactive, modular, and disease-based lectures (case studies) and substantial laboratory work. As a result of taking these courses, all students obtained better objective outcomes, on tests, and subjective outcomes, through student satisfaction. In this article, we report on our unique biomedical education programs for engineers and their effects on working engineers.

Software engineering as an engineering discipline

NASA Technical Reports Server (NTRS)

Gibbs, Norman

1988-01-01

The goals of the Software Engineering Institute's Education Program are as follows: to increase the number of highly qualified software engineers--new software engineers and existing practitioners; and to be the leading center of expertise for software engineering education and training. A discussion of these goals is presented in vugraph form.

Construction of Engineering Education Program based on the Alumni's Evaluation of the Educational Outcome

NASA Astrophysics Data System (ADS)

Tsukamoto, Takehiko; Nishizawa, Hitoshi

The Department of Electrical and Electronic Engineering in Toyota National College of Technology has put great emphasis on fundamental subjects, such as “electrical and electronic circuit" and “electromagnetism" more than 40 years. On the other hand, several issues of our college were clarified by the alumni's evaluation of the educational outcome in 2002. The most serious issue was low achievement of English and Social education. The alumni of all generation are dissatisfied with their low skill in English communication. As a part of the educational reforms, our department has constructed a new engineering education program focusing on fundamental ability. We introduced many problem-based-learning experiments and the compulsory subjects such as “English communication for electrical engineers" and “Engineering Ethics" into this program. Great educative results are obtained by these improvements. As a typical example, the scores of all 2nd grade students of advanced engineering course in TOEIC tests became 450 points or more. Our program has been authorized by JABEE since 2004.

Study on the continuing education innovative talents training mode of civil engineering major

NASA Astrophysics Data System (ADS)

Sun, Shengnan; Su, Zhibin; Cui, Shicai

2017-12-01

According to the characteristics of civil engineering professional continuing education, continuing education of innovative talents training mode suitable for the characteristics of our school is put forward in this paper. The characteristics of the model include: the education of professional basic courses and specialized courses should be paid attention to; engineering training should be strengthened and engineering quality should be trained; the concept of large civil engineering should be highlighted, the specialized areas should be broadened, and the curriculum system should be reconstructed; the mechanism of personnel training program should be constructed by the employers, the domestic highlevel institutions and our university. It is hoped that the new training model will promote the development of continuing education of civil engineering specialty in our university.

Understanding Engineers' Responsibilities: A Prerequisite to Designing Engineering Education : Commentary on "Educating Engineers for the Public Good Through International Internships: Evidence from a Case Study at Universitat Politècnica de València".

PubMed

Murphy, Colleen; Gardoni, Paolo

2017-07-18

The development of the curriculum for engineering education (course requirements as well as extra-curricular activities like study abroad and internships) should be based on a comprehensive understanding of engineers' responsibilities. The responsibilities that are constitutive of being an engineer include striving to fulfill the standards of excellence set by technical codes; to improve the idealized models that engineers use to predict, for example, the behavior of alternative designs; and to achieve the internal goods such as safety and sustainability as they are reflected in the design codes. Globalization has implications for these responsibilities and, in turn, for engineering education, by, for example, modifying the collection of possible solutions recognized for existing problems. In addition, international internships can play an important role in fostering the requisite moral imagination of engineering students.

IEEE Conference on Software Engineering Education and Training (CSEE&T 2012) Proceedings (25th, Nanjing, Jiangsu, China, April 17-19, 2012)

ERIC Educational Resources Information Center

IEEE Conference on Software Engineering Education and Training, Proceedings (MS), 2012

2012-01-01

The Conference on Software Engineering Education and Training (CSEE&T) is the premier international peer-reviewed conference, sponsored by the Institute of Electrical and Electronics Engineers, Inc. (IEEE) Computer Society, which addresses all major areas related to software engineering education, training, and professionalism. This year, as…

Effects of Engineering Design-Based Science on Elementary School Science Students' Engineering Identity Development across Gender and Grade

ERIC Educational Resources Information Center

Capobianco, Brenda M.; Yu, Ji H.; French, Brian F.

2015-01-01

The integration of engineering concepts and practices into elementary science education has become an emerging concern for science educators and practitioners, alike. Moreover, how children, specifically preadolescents (grades 1-5), engage in engineering design-based learning activities may help science educators and researchers learn more about…

A New Introductory Course in the Engineering Education at the University of Tromsø

ERIC Educational Resources Information Center

Arne, Gjengedal; Tor, Schive

2016-01-01

In 2011 a new national curriculum for the education of engineers was established in Norway. The objective of the curriculum is to ascertain that engineering education is professionally oriented, integrated, research-based and has a high academic standard. Institutions are instructed to facilitate a holistic approach to the engineering profession,…

The Engineering of Engineering Education: Curriculum Development from a Designer's Point of View

ERIC Educational Resources Information Center

Rompelman, Otto; De Graaff, Erik

2006-01-01

Engineers have a set of powerful tools at their disposal for designing robust and reliable technical systems. In educational design these tools are seldom applied. This paper explores the application of concepts from the systems approach in an educational context. The paradigms of design methodology and systems engineering appear to be suitable…

Peculiarities of Design Competence Formation in Future Clothing Engineering Educators in Ukraine and Foreign Countries

ERIC Educational Resources Information Center

Bilyk, Victoria

2015-01-01

The importance of engineering pedagogical education for the global labour market has been characterized. The peculiarities of modern engineering pedagogical education formation in foreign countries consisting in economy globalization, transition to a high quality education and international cooperation enhancing have been presented. The essence of…

Quality Assurance and Accreditation of Engineering Education in Jordan

ERIC Educational Resources Information Center

Aqlan, Faisal; Al-Araidah, Omar; Al-Hawari, Tarek

2010-01-01

This paper provides a study of the quality assurance and accreditation in the Jordanian higher education sector and focuses mainly on engineering education. It presents engineering education, accreditation and quality assurance in Jordan and considers the Jordan University of Science and Technology (JUST) for a case study. The study highlights the…

Preparing the Future Workforce: Science, Technology, Engineering and Math (STEM) Policy in K-12 Education

ERIC Educational Resources Information Center

Dickman, Anneliese; Schwabe, Amy; Schmidt, Jeff; Henken, Rob

2009-01-01

Last December, the Science, Technology, Engineering, and Mathematics (STEM) Education Coalition--a national organization of more than 600 groups representing knowledge workers, educators, scientists, engineers, and technicians--wrote to President-elect Obama urging him to "not lose sight of the critical role that STEM education plays in…

Digital dissemination platform of transportation engineering education materials.

DOT National Transportation Integrated Search

2014-09-01

National agencies have called for more widespread adoption of best practices in engineering education. To facilitate this sharing of practices we will develop a web-based system that will be used by transportation engineering educators to share curri...

Review of status and potential of tungsten-wire: Superalloy composites for advanced gas turbine engine blades

NASA Technical Reports Server (NTRS)

Signorelli, R. A.

1972-01-01

The current status of development of refractory-wire-superalloy composites and the potential for their application to turbine blades in land-based power generation and advanced aircraft engines are reviewed. The data indicate that refractory-wire-superalloy composites have application as turbine blades at temperatures of 2200 F and above.

Recognizing the 150th anniversary of the founding of the Brotherhood of Locomotive Engineers and Trainmen, and congratulating the members and officers of the Brotherhood of Locomotive Engineers and Trainmen for the union's many achievements.

THOMAS, 113th Congress

Rep. Walz, Timothy J. [D-MN-1

2013-05-08

House - 05/09/2013 Referred to the Subcommittee on Railroads, Pipelines, and Hazardous Materials. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Understanding Latino Students' Sense of Belonging in Engineering: The Impact of Institutional Agents at one Predominantly White Institution

NASA Astrophysics Data System (ADS)

Alva, Desiree D.

This study explores the ways in which institutional agents (i.e., faculty, staff, and advisors) influence Latino engineering students' sense of belonging at a predominantly White institution (PWI). Research (e.g., Museus, Palmer, Davis, & Maramba, 2011) has shown the struggles that Latino students face in pursuing higher education (e.g., culture shock, marginalization, financial barriers), as well as the obstacles that some of them face related to their undocumented status (e.g., out-of-state tuition, ineligibility for federal student aid) (Gildersleeve & Ranero, 2010; Gildersleeve, Rumann, & Mondragon, 2010). However, there is little to no empirical research that describes how successful Latino engineering students connect socially in order to feel a sense of belonging in competitive majors, such as engineering, at a PWI. To explore this phenomenon, this study addressed the following research questions: (a) How do Latino students describe their social connections with institutional agents? (b) According to Latino students, how have those social connections influenced their sense of belonging in engineering at a PWI? (c) How are the social connections and their influence on sense of belonging in engineering alike or different for Latinos who identify as undocumented? Using a qualitative case study design (i.e., on-site observations, interviews, and a constant comparative method), the social connections that seven Latino students made at one Midwestern university were explored in an effort to understand the influence that institutional agents had on their sense of belonging in engineering at a PWI. The findings revealed that while Latinos felt marginalized, they eventually felt a sense of belonging in engineering through developing their engineering identity with the support of institutional agents and peers. Further implications for theory, methodology, policy, and practice were also explored.

Status Configurations, Military Service and Higher Education

PubMed Central

Wang, Lin; Elder, Glen H.; Spence, Naomi J.

2012-01-01

The U.S. Armed Forces offer educational and training benefits as incentives for service. This study investigates the influence of status configurations on military enlistment and their link to greater educational opportunity. Three statuses (socioeconomic status of origin, cognitive ability and academic performance) have particular relevance for life course options. We hypothesize that young men with inconsistent statuses are more likely to enlist than men with consistent status profiles, and that military service improves access to college for certain configurations. Analyses of the National Longitudinal Study of Adolescent Health (Add Health) show (1. that several status configurations markedly increased the likelihood of military enlistment and (2. within status configurations, recruits were generally more likely to enroll in higher education than nonveterans, with associate degrees being more likely. PMID:24511161

Status of the Combined Cycle Engine Rig

NASA Technical Reports Server (NTRS)

Saunders, Dave; Slater, John; Dippold, Vance

2009-01-01

Status for the past year is provided of the turbine-based Combined-Cycle Engine (CCE) Rig for the hypersonic project. As part of the first stage propulsion of a two-stage-to-orbit vehicle concept, this engine rig is designed with a common inlet that supplies flow to a turbine engine and a dual-mode ramjet / scramjet engine in an over/under configuration. At Mach 4 the inlet has variable geometry to switch the airflow from the turbine to the ramjet / scramjet engine. This process is known as inlet mode-transition. In addition to investigating inlet aspects of mode transition, the rig will allow testing of turbine and scramjet systems later in the test series. Fully closing the splitter cowl "cocoons" the turbine engine and increases airflow to the scramjet duct. The CCE Rig will be a testbed to investigate integrated propulsion system and controls technology objectives. Four phases of testing are planned to 1) characterize the dual inlet database, 2) collect inlet dynamics using system identification techniques, 3) implement an inlet control to demonstrate mode-transition scenarios and 4) demonstrate integrated inlet/turbine engine operation through mode-transition. Status of the test planning and preparation activities is summarized with background on the inlet design and small-scale testing, analytical CFD predictions and some details of the large-scale hardware. The final stages of fabrication are underway.

Curriculum planning for the development of graphicacy capability: three case studies from Europe and the USA

NASA Astrophysics Data System (ADS)

Danos, Xenia; Barr, Ronald; Górska, Renata; Norman, Eddie

2014-11-01

Curriculum planning for the development of graphicacy capability has not been systematically included in general education to coincide with the graphicacy needs of human society. In higher education, graphicacy curricula have been developed to meet the needs of certain disciplines, for example medical and teacher training and engineering, among others. A framework for graphicacy curricula, anticipating the graphicacy needs in higher education, has yet to be strategically planned for general education. This is partly a result of lack of research effort in this area, but also a result of lack of systematic curriculum planning in general. This paper discusses these issues in the context of graphicacy curricula for engineering. The paper presents three broad individual case studies spanning Europe and the USA, brought together by the common denominator, graphicacy. The case studies are based on: an analysis of graphicacy within general education curricula, an analysis of graphicacy for engineering education in Europe and an analysis of graphicacy for engineering education in the USA. These three papers were originally presented in a plenary session at the American Society for Engineering Education, Engineering Design Graphics Division at the University of Limerick in November 2012. The case studies demonstrate the potential for strategic curriculum planning in regard to the development of graphicacy in general education and an overview of a methodology to achieve that. It also offers further evidence towards the importance of the systematic classification of graphics capabilities in Engineering and how the lack of a developed theoretical framework in this area undermines the case for the importance of graphics within engineering education.

Examining the Critical Thinking Dispositions and the Problem Solving Skills of Computer Engineering Students

ERIC Educational Resources Information Center

Özyurt, Özcan

2015-01-01

Problem solving is an indispensable part of engineering. Improving critical thinking dispositions for solving engineering problems is one of the objectives of engineering education. In this sense, knowing critical thinking and problem solving skills of engineering students is of importance for engineering education. This study aims to determine…

Engineering education research: Impacts of an international network of female engineers on the persistence of Liberian undergraduate women studying engineering

NASA Astrophysics Data System (ADS)

Rimer, Sara; Reddivari, Sahithya; Cotel, Aline

2015-11-01

As international efforts to educate and empower women continue to rise, engineering educators are in a unique position to be a part of these efforts by encouraging and supporting women across the world at the university level through STEM education and outreach. For the past two years, the University of Michigan has been a part of a grassroots effort to encourage and support the persistence of engineering female students at University of Liberia. This effort has led to the implementation of a leadership camp this past August for Liberian engineering undergraduate women, meant to: (i) to empower engineering students with the skills, support, and inspiration necessary to become successful and well-rounded engineering professionals in a global engineering market; and (ii) to strengthen the community of Liberian female engineers by building cross-cultural partnerships among students resulting in a international network of women engineers. This session will present qualitative research findings on the impact of this grassroots effort on Liberian female students? persistence in engineering, and the future directions of this work.

Engineering design skills coverage in K-12 engineering program curriculum materials in the USA

NASA Astrophysics Data System (ADS)

Chabalengula, Vivien M.; Mumba, Frackson

2017-11-01

The current K-12 Science Education framework and Next Generation Science Standards (NGSS) in the United States emphasise the integration of engineering design in science instruction to promote scientific literacy and engineering design skills among students. As such, many engineering education programmes have developed curriculum materials that are being used in K-12 settings. However, little is known about the nature and extent to which engineering design skills outlined in NGSS are addressed in these K-12 engineering education programme curriculum materials. We analysed nine K-12 engineering education programmes for the nature and extent of engineering design skills coverage. Results show that developing possible solutions and actual designing of prototypes were the highly covered engineering design skills; specification of clear goals, criteria, and constraints received medium coverage; defining and identifying an engineering problem; optimising the design solution; and demonstrating how a prototype works, and making iterations to improve designs were lowly covered. These trends were similar across grade levels and across discipline-specific curriculum materials. These results have implications on engineering design-integrated science teaching and learning in K-12 settings.

Green engineering education through a U.S. EPA/academia collaboration.

PubMed

Shonnard, David R; Allen, David T; Nguyen, Nhan; Austin, Sharon Weil; Hesketh, Robert

2003-12-01

The need to use resources efficiently and reduce environmental impacts of industrial products and processes is becoming increasingly important in engineering design; therefore, green engineering principles are gaining prominence within engineering education. This paper describes a general framework for incorporating green engineering design principles into engineering curricula, with specific examples for chemical engineering. The framework for teaching green engineering discussed in this paper mirrors the 12 Principles of Green Engineering proposed by Anastas and Zimmerman (Environ. Sci. Technol. 2003, 37, 94A-101A), especially in methods for estimating the hazardous nature of chemicals, strategies for pollution prevention, and approaches leading to efficient energy and material utilization. The key elements in green engineering education, which enlarge the "box" for engineering design, are environmental literacy, environmentally conscious design, and beyond-the-plant boundary considerations.

Knowledge Integration and Wise Engineering

ERIC Educational Resources Information Center

Chiu, Jennifer L.; Linn, M. C.

2011-01-01

Recent efforts in engineering education focus on introducing engineering into secondary math and science courses to improve science, technology, engineering, and math (STEM) education (NAS, 2010). Infusing engineering into secondary classrooms can increase awareness of and interest in STEM careers, help students see the relevance of science and…

Transformation of engineering education: Taking a perspective for the challenges of change

NASA Astrophysics Data System (ADS)

Siddiqui, Junaid Abdul Wahid

There are a variety of imperatives which call us to transform engineering education. Those who have made attempts to facilitate a change in engineering education have experienced slow or no progress. The literature on change has suggestions and strategies related to educational change but most of them are not able to guide the conversations and actions effectively. People interested in understanding the challenges often ask 'what makes educational change so difficult?' This research is an effort towards finding an answer to this question. The study adopted a transdisciplinary approach while taking a systems perspective on educational change in order to examine the challenges. Instead of exploring the effectiveness of change strategies and interventions, this study sought to understand the basic nature of change in engineering education organizations. For this purpose, the study adopted an integrated theoretical framework consisting of systems thinking, complexity theory, and transformative learning theory. The methodology was designed on the complexity research paradigm with interpretive qualitative methods used for data analysis. This approach enabled understanding the social and human conditions which reduce or enhance the likelihood of change in the context of an engineering education organization. The context for this study to investigate the challenges of transformation in engineering education is efforts around educating the Engineer of 2020. Four institutional initiatives at various stages in the transformation process provided cases for investigation in the study. The engineering educators at the four institutions participating in the study had experiences of active engagement in educational change. The interpretive qualitative analysis of the participants' accounts induced a systems perspective of the challenges which faculty face in their educational transformation efforts. The inertia which educational organizations experience against change appears to be caused by the commitment which the faculty members have to the educational paradigm prevalent in the organization and by the organizational structures and culture established in this paradigm. A condition that seems essential for the emergence of a new educational formation within an organizational context is the formation of a neighborhood of faculty who have a commitment for innovative education. The new ways of education seem to emerge in sustained, serendipitous, and long-term communicative interactions among the inhabitants of a neighborhood.

Examining the Extent to Which Select Teacher Preparation Experiences Inform Technology and Engineering Educators' Teaching of Science Content and Practices

ERIC Educational Resources Information Center

Love, Tyler S.

2015-01-01

With the recent release of the "Next Generation Science Standards" (NGSS) (NGSS Lead States, 2014b) science educators were expected to teach engineering content and practices within their curricula. However, technology and engineering (T&E) educators have been expected to teach content and practices from engineering and other…

Using Teaching Portfolios to Revise Curriculum and Explore Instructional Practices of Technology and Engineering Education Teachers

ERIC Educational Resources Information Center

Lomask, Michal; Crismond, David; Hacker, Michael

2018-01-01

This paper reports on the use of teaching portfolios to assist in curriculum revision and the exploration of instructional practices used by middle school technology and engineering education teachers. Two new middle school technology and engineering education units were developed through the Engineering for All (EfA) project. One EfA unit focused…

Education for Sustainable Development: Assessment of the Current Situation at the Faculty of Engineering of Notre Dame University--Louaize

ERIC Educational Resources Information Center

Salem, Talal; Harb, Jacques

2012-01-01

There is a growing need to incorporate educational sustainable development (ESD) principles into engineering education. This paper identifies engineering competencies within the Faculty of Engineering at Notre Dame University--Louaize and the means to shift towards sustainability. ESD tools are used to carry the analysis, keeping in mind the…

Engineering Skills Education: The Bachelor of Engineering Programme of the "Vrije Universiteit Brussel" as a Case Study

ERIC Educational Resources Information Center

Van Biesen, Leo Pierre; Rahier, Hubert; Vanherzeele, Herman; Willem, Rudolph; Hubin, Annick; Veretennicoff, Irina; Deblauwe, Nico; Ponet, Mireille

2009-01-01

The Bologna process has triggered an important change in the course outline towards a sustainable, transparent and quality-driven European education system. In Belgium, engineering education had to be completely revised. The transformation of the former system, leading to the degree of academic engineer after five years of study, into the typical…

Relationships, variety & synergy: the vital ingredients for scholarship in engineering education? A case study

NASA Astrophysics Data System (ADS)

Clark, Robin; Andrews, Jane

2014-11-01

This paper begins with the argument that within modern-day society, engineering has shifted from being the scientific and technical mainstay of industrial, and more recently digital change to become the most vital driver of future advancement. In order to meet the inevitable challenges resulting from this role, the nature of engineering education is constantly evolving and as such engineering education has to change. The paper argues that what is needed is a fresh approach to engineering education - one that is sufficiently flexible so as to capture the fast-changing needs of engineering education as a discipline, whilst being pedagogically suitable for use with a range of engineering epistemologies. It provides an overview of a case study in which a new approach to engineering education has been developed and evaluated. The approach, which is based on the concept of scholarship, is described in detail. This is followed by a discussion of how the approach has been put into practice and evaluated. The paper concludes by arguing that within today's market-driven university world, the need for effective learning and teaching practice, based in good scholarship, is fundamental to student success.

Identifying and Verifying Earthquake Engineering Concepts to Create a Knowledge Base in STEM Education: A Modified Delphi Study

ERIC Educational Resources Information Center

Cavlazoglu, Baki; Stuessy, Carol L.

2017-01-01

Stakeholders in STEM education have called for integrating engineering content knowledge into STEM-content classrooms. To answer the call, stakeholders in science education announced a new framework, Next Generation Science Standards, which focuses on the integration of science and engineering in K-12 science education. However, research indicates…

How to Be an Ethical Engineer in an Often Unethical World: Integrated Interdisciplinary Education in the Sciences and Humanities

ERIC Educational Resources Information Center

Maurice, Patricia Ann; Peterson, Brian

2015-01-01

Catholic colleges and universities traditionally are grounded in liberal arts education, yet many Catholic institutions also educate future scientists and engineers. We propose that a distinctively Catholic science and engineering education should include an emphasis on Catholic concepts of the common good and social justice, liberal arts…

Engineering students' and faculty perceptions of teaching methods and the level of faculty involvement that promotes academic success

NASA Astrophysics Data System (ADS)

Karpilo, Lacy N.

Student academic success is a top priority of higher education institutions in the United States and the trend of students leaving school prior to finishing their degree is a serious concern. Accountability has become a large part of university and college ratings and perceived success. Retention is one component of the accountability metrics used by accreditation agencies. In addition, there are an increasing number of states allocating funds based in part on retention (Seidman, 2005). Institutions have created initiatives, programs, and even entire departments to address issues related to student academic success to promote retention. Universities and colleges have responded by focusing on methods to retain and better serve students. Retention and student academic success is a primary concern for high education institutions; however, engineering education has unique retention issues. The National Science Board (2004) reports a significant decline in the number of individuals in the United States who are training to become engineers, despite the fact that the number of jobs that utilize an engineering background continues to increase. Engineering education has responded to academic success issues by changing curriculum and pedagogical methods (Sheppard, 2001). This descriptive study investigates the perception of engineering students and faculty regarding teaching methods and faculty involvement to create a picture of what is occurring in engineering education. The population was the engineering students and faculty of Colorado State University's College of Engineering. Data from this research suggests that engaging teaching methods are not being used as often as research indicates they should and that there is a lack of student-faculty interaction outside of the classroom. This research adds to the breadth of knowledge and understanding of the current environment of engineering education. Furthermore, the data allows engineering educators and other higher education professionals to gain insight into the teaching methods currently being utilized in engineering and reinforces the importance of student-faculty interaction and thus facilitating the creation of programs or initiatives to improve student academic success.

Generic Engineering Competencies: A Review and Modelling Approach

ERIC Educational Resources Information Center

Male, Sally A.

2010-01-01

This paper puts forward the view that engineering educators have a responsibility to prepare graduates for engineering work and careers. The current literature reveals gaps between the competencies required for engineering work and those developed in engineering education. Generic competencies feature in these competency gaps. Literature suggests…

Epistemic Practices of Engineering for Education

ERIC Educational Resources Information Center

Cunningham, Christine M.; Kelly, Gregory J.

2017-01-01

Engineering offers new educational opportunities for students, yet also poses challenges about how to conceptualize the disciplinary core ideas, crosscutting concepts, and science and engineering practices of the disciplinary fields of engineering. In this paper, we draw from empirical studies of engineering in professional and school settings to…

How Engineers Perceive the Importance of Ethics in Finland

ERIC Educational Resources Information Center

Taajamaa, Ville; Majanoja, Anne-Maarit; Bairaktarova, Diana; Airola, Antti; Pahikkala, Tapio; Sutinen, Erkki

2018-01-01

Success in complex and holistic engineering practices requires more than problem-solving abilities and technical competencies. Engineering education must offer proficient technical competences and also train engineers to think and act ethically. A technical "engineering-like" focus and demand have made educators and students overlook the…

How Should We Foster the Professional Integrity of Engineers in Japan? A Pride-Based Approach

PubMed Central

2007-01-01

I discuss the predicament that engineering-ethics education in Japan now faces and propose a solution to this. The predicament is professional motivation, i.e., the problem of how to motivate engineering students to maintain their professional integrity. The special professional responsibilities of engineers are often explained either as an implicit social contract between the profession and society (the “social-contract” view), or as requirements for membership in the profession (the “membership-requirement” view). However, there are empirical data that suggest that such views will not do in Japan, and this is the predicament that confronts us. In this country, the profession of engineering did not exist 10 years ago and is still quite underdeveloped. Engineers in this country do not have privileges, high income, or high social status. Under such conditions, neither the social-contract view nor the membership-requirement view is convincing. As an alternative approach that might work in Japan, I propose a pride-based view. The notion of pride has been analyzed in the virtue-ethics literature, but the full potential of this notion has not been explored. Unlike other kinds of pride, professional pride can directly benefit the general public by motivating engineers to do excellent work even without social rewards, since being proud of themselves is already a reward. My proposal is to foster a particular kind of professional pride associated with the importance of professional services in society, as the motivational basis for professional integrity. There is evidence to suggest that this model works. PMID:18000761

How should we foster the professional integrity of engineers in Japan? A pride-based approach.

PubMed

Iseda, Tetsuji

2008-06-01

I discuss the predicament that engineering-ethics education in Japan now faces and propose a solution to this. The predicament is professional motivation, i.e., the problem of how to motivate engineering students to maintain their professional integrity. The special professional responsibilities of engineers are often explained either as an implicit social contract between the profession and society (the "social-contract" view), or as requirements for membership in the profession (the "membership-requirement" view). However, there are empirical data that suggest that such views will not do in Japan, and this is the predicament that confronts us. In this country, the profession of engineering did not exist 10 years ago and is still quite underdeveloped. Engineers in this country do not have privileges, high income, or high social status. Under such conditions, neither the social-contract view nor the membership-requirement view is convincing. As an alternative approach that might work in Japan, I propose a pride-based view. The notion of pride has been analyzed in the virtue-ethics literature, but the full potential of this notion has not been explored. Unlike other kinds of pride, professional pride can directly benefit the general public by motivating engineers to do excellent work even without social rewards, since being proud of themselves is already a reward. My proposal is to foster a particular kind of professional pride associated with the importance of professional services in society, as the motivational basis for professional integrity. There is evidence to suggest that this model works.

Equal Educational Opportunity. The Status of Black Americans in Higher Education, 1975-1977. ISEP Third Status Report.

ERIC Educational Resources Information Center

Howard Univ., Washington, DC. Inst. for the Study of Educational Policy.

This report analyzes the status of black Americans in higher education from 1975-1977. The book opens with a review of basic concepts of equal educational opportunity and the Federal role in guaranteeing equal opportunity. The social and economic context for higher education is then examined with a focus on the national commitment to higher…

Employing Liberative Pedagogies in Engineering Education.

ERIC Educational Resources Information Center

Riley, Donna

2003-01-01

Motivates the use of feminist, critical, and radical pedagogies in engineering education and presents their application in an engineering thermodynamics course. Discusses assessment approaches and the limitations of liberative pedagogies in an engineering context. (Contains 40 references.) (Author/NB)

Australian engineering educators' attitudes towards Aboriginal cultures and perspectives

NASA Astrophysics Data System (ADS)

Goldfinch, Thomas; Prpic, Juliana Kaya; Jolly, Lesley; Leigh, Elyssebeth; Kennedy, Jade

2017-07-01

In Australia, representation of Aboriginal populations within the engineering profession is very low despite participation targets set by Government departments, professional bodies and Universities. Progressing the Aboriginal inclusion agenda within Australian Engineering Education requires a clearer understanding of engineering educators' preparedness for increased numbers of students from this non-traditional cohort. This research stems from a recently completed project that explored Aboriginal perspectives in engineering education and proposed a model for embedding perspectives in curricula. Nine engineering academics were interviewed to explore attitudes towards Aboriginal perspectives in engineering and the viability of the proposed model. Results of the interviews indicate efforts to embed Aboriginal perspectives are starting from a small base of knowledge and experience. Individuals' motivations and values indicate that there is significant support for improving this, but that efforts can be hampered by conceptions of Aboriginal perspectives that do not consider how Aboriginal knowledges may change engineering itself.

Automobile Engine Control Parameters Study : Volume 1. Summary and Status of Domestic Engine Control Practice

DOT National Transportation Integrated Search

1977-02-01

This report contains the results of a study to evaluate automobile engine control parameters and their effects on vehicle fuel economy and emissions. Volume I presents detailed technical information on the engine control practices used by selected do...

Status on the Verification of Combustion Stability for the J-2X Engine Thrust Chamber Assembly

NASA Technical Reports Server (NTRS)

Casiano, Matthew; Hinerman, Tim; Kenny, R. Jeremy; Hulka, Jim; Barnett, Greg; Dodd, Fred; Martin, Tom

2013-01-01

Development is underway of the J -2X engine, a liquid oxygen/liquid hydrogen rocket engine for use on the Space Launch System. The Engine E10001 began hot fire testing in June 2011 and testing will continue with subsequent engines. The J -2X engine main combustion chamber contains both acoustic cavities and baffles. These stability aids are intended to dampen the acoustics in the main combustion chamber. Verification of the engine thrust chamber stability is determined primarily by examining experimental data using a dynamic stability rating technique; however, additional requirements were included to guard against any spontaneous instability or rough combustion. Startup and shutdown chug oscillations are also characterized for this engine. This paper details the stability requirements and verification including low and high frequency dynamics, a discussion on sensor selection and sensor port dynamics, and the process developed to assess combustion stability. A status on the stability results is also provided and discussed.

Students' attitudes towards interdisciplinary education: a course on interdisciplinary aspects of science and engineering education

NASA Astrophysics Data System (ADS)

Gero, Aharon

2017-05-01

A course entitled 'Science and Engineering Education: Interdisciplinary Aspects' was designed to expose undergraduate students of science and engineering education to the attributes of interdisciplinary education which integrates science and engineering. The core of the course is an interdisciplinary lesson, which each student is supposed to teach his/her peers. Sixteen students at advanced stages of their studies attended the course. The research presented here used qualitative instruments to characterise students' attitudes towards interdisciplinary learning and teaching of science and engineering. According to the findings, despite the significant challenge which characterises interdisciplinary teaching, a notable improvement was evident throughout the course in the percentage of students who expressed willingness to teach interdisciplinary classes in future.

An Educational Program of Mechatronics for Multidisciplinary Knowledge Acquisition

NASA Astrophysics Data System (ADS)

Watanuki, Keiichi; Kojima, Kazuyuki

Recently, as the technologies surrounding mechanical engineering have improved remarkably, the expectations for students who graduate from departments of mechanical engineering have increased. For example, in order to develop a mechatronics system, a student needs to integrate a wide variety of technologies, such as mechanical engineering, electrical and electronics engineering, and information technology. Therefore, from the perspective of educators, the current education system, which stresses expertizing each technology, should be replaced by an education system that stresses integrating multidisciplinary knowledge. In this paper, a trial education program for students of the department of mechanical engineering in our university, in which students are required to integrate multidisciplinary knowledge in order to develop a biologically-based robot, is described. Finally, the efficacy of the program is analyzed.

Engineering students' experiences and perceptions of workplace problem solving

NASA Astrophysics Data System (ADS)

Pan, Rui

In this study, I interviewed 22 engineering Co-Op students about their workplace problem solving experiences and reflections and explored: 1) Of Co-Op students who experienced workplace problem solving, what are the different ways in which students experience workplace problem solving? 2) How do students perceive a) the differences between workplace problem solving and classroom problem solving and b) in what areas are they prepared by their college education to solve workplace problems? To answer my first research question, I analyzed data through the lens of phenomenography and I conducted thematic analysis to answer my second research question. The results of this study have implications for engineering education and engineering practice. Specifically, the results reveal the different ways students experience workplace problem solving, which provide engineering educators and practicing engineers a better understanding of the nature of workplace engineering. In addition, the results indicate that there is still a gap between classroom engineering and workplace engineering. For engineering educators who aspire to prepare students to be future engineers, it is imperative to design problem solving experiences that can better prepare students with workplace competency.

Automotive Stirling engine development program - Overview and status report

NASA Technical Reports Server (NTRS)

Nightingale, N. P.

1983-01-01

The current status of the automotive-Stirling-engine development program being undertaken by DOE and NASA Lewis is reviewed. The program goals and the reference-engine design are explained, and the modifications introduced to improve performance and lower manufacturing costs are discussed and illustrated, including part-power optimization; increased operating temperature (from 720 to 820 C); 45.4-kg weight reduction; elimination of Co and reduction of Cr used; and improved seals, ceramic components, and high-temperature alloys. The test program, some difficulties encountered, and results after 2042 h are summarized.

Industrial Partners in the Education of an Engineer

ERIC Educational Resources Information Center

Smith, Barnard E.

1973-01-01

Discusses the theory, operation, and practical problems encountered in conducting a professional program which emphasizes close contact with industrial engineers in engineering education. Indicates that the partnership program provides one means for firms to participate in educational activities while serving their own interests. (CC)

Development of Key Performance Indicators for the Engineering Technology Education Programs in Taiwan

ERIC Educational Resources Information Center

Lee, Lung-Sheng; Lai, Chun-Chin

2004-01-01

In comparison with engineering, engineering technology is more practical and purposeful. The engineering technology education programs in Taiwan have been mainly offered in 56 universities/colleges of technology (UTs/CTs) and are anticipated to continuously improve their performance to prepare quality engineering technologists. However, it is…

What Do Engineers Want? Examining Engineering Education through Bloom's Taxonomy

ERIC Educational Resources Information Center

Goel, Sanjay; Sharda, Nalin

2004-01-01

Using Bloom's taxonomy as the basis for an empirical investigation, this paper examines what engineering students and professionals want from engineering education. Fifty engineering students, from Computer Science and Information Technology courses, were asked to rank activity verbs in order of their impression about frequency of their occurrence…

Engineering Design Skills Coverage in K-12 Engineering Program Curriculum Materials in the USA

ERIC Educational Resources Information Center

Chabalengula, Vivien M.; Mumba, Frackson

2017-01-01

The current "K-12 Science Education framework" and "Next Generation Science Standards" (NGSS) in the United States emphasise the integration of engineering design in science instruction to promote scientific literacy and engineering design skills among students. As such, many engineering education programmes have developed…

Engineering Background: Modern Formats and Challenges of Conceptual Engineering

NASA Astrophysics Data System (ADS)

Khamidullina, A. F.; Kuzmina, M. A.; Khusnutdinova, E. M.; Konakhina, I. A.

2017-09-01

This paper describes the analysis of problems and development perspectives of engineering education in our and other countries. Special attention is given to modern formats of education that motivate creative efforts of engineers-to-be as well as issues of conceptual engineering taking the challenges of modernity into account.

Developing Leadership Skills of Undergraduate Engineering Students: Perspectives from Engineering Faculty

ERIC Educational Resources Information Center

Cox, Monica F.; Cekic, Osman; Adams, Stephanie G.

2010-01-01

The engineering education community (motivated by internal and external factors) has begun to focus on leadership abilities of college students in engineering fields via reports from ABET, the National Academy of Engineering, and the National Research Council. These reports have directed criticism toward higher education institutions for their…

40 CFR 1068.31 - What provisions apply to nonroad or stationary engines that change their status?

Code of Federal Regulations, 2010 CFR

2010-07-01

... nonroad application is subsequently used in an application other than a nonroad application, or when an engine previously used in a stationary application (i.e., an engine that was not used as a nonroad engine... stationary engine becomes a new nonroad engine if— (1) It is used in an application that meets the criteria...

Integration of Engineering Education by High School Teachers to Meet Standards in the Physics Classroom

ERIC Educational Resources Information Center

Kersten, Jennifer Anna

2013-01-01

In recent years there has been increasing interest in engineering education at the K-12 level, which has resulted in states adopting engineering standards as a part of their academic science standards. From a national perspective, the basis for research into engineering education at the K-12 level is the belief that it is of benefit to student…

Incorporating global components into ethics education.

PubMed

Wang, George; Thompson, Russell G

2013-03-01

Ethics is central to science and engineering. Young engineers need to be grounded in how corporate social responsibility principles can be applied to engineering organizations to better serve the broader community. This is crucial in times of climate change and ecological challenges where the vulnerable can be impacted by engineering activities. Taking a global perspective in ethics education will help ensure that scientists and engineers can make a more substantial contribution to development throughout the world. This paper presents the importance of incorporating the global and cross culture components in the ethic education. The authors bring up a question to educators on ethics education in science and engineering in the globalized world, and its importance, necessity, and impendency. The paper presents several methods for discussion that can be used to identify the differences in ethics standards and practices in different countries; enhance the student's knowledge of ethics in a global arena.

Motivational factors, gender and engineering education

NASA Astrophysics Data System (ADS)

Kolmos, Anette; Mejlgaard, Niels; Haase, Sanne; Egelund Holgaard, Jette

2013-06-01

Based on survey data covering the full population of students enrolled in Danish engineering education in autumn 2010, we explore the motivational factors behind educational choice, with a particular aim of comparing male and female students1 reasons for choosing a career in engineering. We find that women are significantly more influenced by mentors than men, while men tend to be more motivated by intrinsic and financial factors, and by the social importance of the engineering profession. Parental influence is low across all programmes and by differentiating between specific clusters of engineering programmes, we further show that these overall gender differences are subtle and that motivational factors are unequally important across the different educational programmes. The findings from this study clearly indicate that intrinsic and social motivations are the most important motivational factors; however, gender and programme differentiation needs to be taken into account, and points towards diverse future strategies for attracting students to engineering education.

77 FR 41366 - Syngenta Biotechnology, Inc.; Availability of Petition, Plant Pest Risk Assessment, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-13

... engineered organisms and products. We are soliciting comments on whether this genetically engineered corn is... pests. Such genetically engineered organisms and products are considered ``regulated articles.'' The... Assessment for Determination of Nonregulated Status of Corn Genetically Engineered for Insect Resistance...

BENCHMARKING SUSTAINABILITY ENGINEERING EDUCATION

EPA Science Inventory

The goals of this project are to develop and apply a methodology for benchmarking curricula in sustainability engineering and to identify individuals active in sustainability engineering education.

Engineer's Notebook--A Design Assessment Tool

ERIC Educational Resources Information Center

Kelley, Todd R.

2011-01-01

As technology education continues to consider a move toward an engineering design focus as proposed by various leaders in technology education, it will be necessary to employ new pedagogical approaches. Hill (2006) provided some new perspectives regarding pedagogical approaches for technology education with an engineering design focus. One…

Environmental Engineering Talent Demand and Undergraduate Education in China

ERIC Educational Resources Information Center

Zhang, Huan-zhen; Li, Jian-bo; Luo, Xiang-nan; Zhao, Bin-yan; Luo, Ren-ming; Wang, Qiao-ling

2004-01-01

In Chinese higher environmental education, undergraduate education of environmental engineering starts earliest and develops fastest. The undergraduate has been playing an important role in controlling pollution for more than twenty years. The setting and distribution of the environmental engineering major was analyzed, the conditions of the…

Integrating Engineering Design into Technology Education: Georgia's Perspective

ERIC Educational Resources Information Center

Denson, Cameron D.; Kelley, Todd R.; Wicklein, Robert C.

2009-01-01

This descriptive research study reported on Georgia's secondary level (grades 6-12) technology education programs capability to incorporate engineering concepts and/or engineering design into their curriculum. Participants were middle school and high school teachers in the state of Georgia who currently teach technology education. Participants…

Software Engineering Education: Some Important Dimensions

ERIC Educational Resources Information Center

Mishra, Alok; Cagiltay, Nergiz Ercil; Kilic, Ozkan

2007-01-01

Software engineering education has been emerging as an independent and mature discipline. Accordingly, various studies are being done to provide guidelines for curriculum design. The main focus of these guidelines is around core and foundation courses. This paper summarizes the current problems of software engineering education programs. It also…

77 FR 12884 - Agency Information Collection Activities: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-02

... colleges, universities, K-12 school systems, businesses, informal science organizations and other research... welfare by supporting research and education in all fields of science and engineering.'' NSF has had a... scientists, engineers, and science and engineering educators. NSF funds research and education in most fields...

Educational and social competencies at 8 years in children with threshold retinopathy of prematurity in the CRYO-ROP multicenter study.

PubMed

Msall, Michael E; Phelps, Dale L; Hardy, Robert J; Dobson, Velma; Quinn, Graham E; Summers, C Gail; Tremont, Michelle R

2004-04-01

To describe the educational status and special education services at 8 years among children who had threshold retinopathy of prematurity (ROP). A prospective study was conducted of a cohort of children who had birth weight of <1251 g and threshold ROP in the Cryotherapy for Retinopathy of Prematurity multicenter study. At age 5.5 years, visual status, functional skills, and social information were obtained. At 8 years, special education classes, developmental disabilities, rehabilitation therapies, and academic and social competencies were determined by questionnaire. Visual status was considered favorable/unfavorable on the basis of the better eye. Of 255 survivors, 216 (85%) were evaluated at both 5.5 and 8 years. Major impairments were significantly more prevalent in children with unfavorable versus favorable visual status: cerebral palsy (39% vs 16%), developmental disability (57% vs 22%), autism (9% vs 1%), and epilepsy (23% vs 3%). Special education services (63% vs 27%), below-grade-level academic performance (84% vs 48%), and school-based rehabilitation services were significantly less common in children with favorable visual status. Favorable visual status, favorable functional ratings at 5.5 years, markers of higher socioeconomic status, and nonblack race were associated with significantly lower rates of both special education placement and below-grade-level academic performance at age 8. On multivariate logistic regression, only favorable visual status and functional status remained significant predictors for decreasing special education placement. Threshold ROP is associated with high rates of developmental, educational, and social challenges in middle childhood; preserved vision was associated with a clear advantage, with more than half of the children with favorable visual status performing at grade level.

Educating the Engineer.

ERIC Educational Resources Information Center

Wallace, Melanie; Wallace, Mack

2003-01-01

Presented as a conversation between a teacher and engineer about school design, addresses educators' preferences and engineers' perspectives on issues, such as windows, sustainable design, sinks, acoustics, and natural ventilation. (EV)

Educating More Engineers

ERIC Educational Resources Information Center

Environmental Science and Technology, 1973

1973-01-01

Indicates that there will be a substantially increased demand for environmental engineers during the next few years, especially in the areas of water pollution control and sanitary engineering. Educators see the need for additional engineering graduates and for improved environmental training programs in schools. (JR)

Chemical Engineering in Education and Industry.

ERIC Educational Resources Information Center

Wei, James

1986-01-01

Provides an historical overview of the origins, developments, and contributions of chemical engineering. Reviews the roles of the university and industry in the education of chemical engineers. Includes a listing of the major advances of chemical engineering since World War II. (ML)

The Fourth Revolution: Educating Engineers for Leadership.

ERIC Educational Resources Information Center

Mark, Hans; Carver, Larry

1988-01-01

Urges a change in engineering education for developing leaders. Describes three previous revolutions in American higher education which responded to the needs of the community. Suggests lifelong education as the fourth revolution. (YP)

A Cross-Sectional Study of Engineering Students' Self-Efficacy by Gender, Ethnicity, Year, and Transfer Status

ERIC Educational Resources Information Center

Concannon, James P.; Barrow, Lloyd H.

2009-01-01

This is a cross-sectional study of 519 undergraduate engineering majors' self-efficacy beliefs at a large, research extensive, Midwestern university. Engineering self-efficacy is an individual's belief in his or her ability to successfully negotiate the academic hurdles of the engineering program. Engineering self-efficacy was obtained from four…

Engineering Gender--Gendering Engineering: What About Women in Nerd-Dom?

ERIC Educational Resources Information Center

Tonso, Karen L.

This paper examines the kinds of persons that engineering education produces, focusing on cultural identities related to gender issues. It is based on survey questionnaires, interviews, and observations of 274 first-year and fourth-year engineering students at a state university known for its concern about the education of women engineers. The…

Becoming an Engineer: Toward a Three Dimensional View of Engineering Learning. Research Brief

ERIC Educational Resources Information Center

Stevens, Reed; O'Connor, Kevin; Garrison, Lari; Jocuns, Andrew; Amos, Daniel M.

2008-01-01

In this paper, the authors develop an analytical framework referred to as "Becoming an Engineer" that focuses upon changes occurring over time as students traverse their undergraduate educations in engineering. This paper discusses three conceptual dimensions used to follow the engineering students' educational pathways: the development of…

Engineering Programs of Tomorrow: The Role of Agricultural Engineering.

ERIC Educational Resources Information Center

Edwards, Donald M.

Due to rapid growth of societal and technological endeavors, engineers of the future will require greater technical competence. At the same time, engineering will become more people oriented with greater emphasis placed on people input into decision making. As a result, engineering education must not only provide improved technical education but…

Promoting Innovative Methods in Technology Education

ERIC Educational Resources Information Center

Al-Nasra, Moayyad M.

2012-01-01

The engineering profession is very sensitive to the new changes in the engineering job market demand. The engineering job market is changing in a much faster rate than the engineering/engineering technology education. A 13-year study will be presented. The study focuses on the factors affecting the survival rate, student academic performance,…

The Efficacy of Surface Haptics and Force Feedback in Education

ERIC Educational Resources Information Center

Gorlewicz, Jenna Lynn

2013-01-01

This dissertation bridges the fields of haptics, engineering, and education to realize some of the potential benefits haptic devices may have in Science, Technology, Engineering, and Math (STEM) education. Specifically, this dissertation demonstrates the development, implementation, and assessment of two haptic devices in engineering and math…

Engineering Education 2001. The Samuel Neaman Institute--Technion Report.

ERIC Educational Resources Information Center

Engineering Education, 1987

1987-01-01

Presents a view of future engineering education as perceived by the Technion faculty group on the basis of their own analysis and the insights gathered from workshop discussions. Contrasts basic and specialized education. Reviews the technologies and skills of the future engineer. Gives an overview of curriculum requirements. (CW)

Current Trends in Aerospace Engineering Education on Taiwan.

ERIC Educational Resources Information Center

Hsieh, Sheng-Jii

A proposal for current trends in Aerospace Engineering Education on Taiwan has been drawn from the suggestions made after a national conference of "Workshop on Aerospace Engineering Education Reform." This workshop was held in January 18-20, 1998, at the Institute of Aeronautics and Astronautics, National Cheng Kung University, Tainan,…

Russian Engineering Education in the Era of Change

ERIC Educational Resources Information Center

Vladimirovich Pukharenko, Yurii; Vladimirovna Norina, Natalia; Aleksandrovich Norin, Veniamin

2017-01-01

The article investigates modern issues of engineering education in Russia related to introduction of the Bologna system. The author shows that the situation in the education in general gives reasons for concern; the issue of qualitative enrolment of students for engineering specialties escalates; graduates with masters and bachelors' degrees are…

77 FR 18268 - Proposal Review Panel for Engineering Education and Centers; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-27

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Engineering Education and Centers; Notice of Meeting In accordance with the Federal Advisory Committee Act (Pub. L. 92- 463, as amended), the National Science Foundation announces the following meeting: Name: Proposal Review Panel for Engineering Education...

Future Directions for Engineering Education: System Response to a Changing World.

ERIC Educational Resources Information Center

Massachusetts Inst. of Tech., Cambridge. Center for Policy Alternatives.

This report consolidates information on the engineering population - numbers, employment patterns, educational levels, personality, technical obsolescence - and probes the implications of current social and employment trends. Included are: data and analyses of the engineering education system seen in the context of the changing world; the…

Motivational Factors, Gender and Engineering Education

ERIC Educational Resources Information Center

Kolmos, Anette; Mejlgaard, Niels; Haase, Sanne; Holgaard, Jette Egelund

2013-01-01

Based on survey data covering the full population of students enrolled in Danish engineering education in autumn 2010, we explore the motivational factors behind educational choice, with a particular aim of comparing male and female students reasons for choosing a career in engineering. We find that women are significantly more influenced by…

Virtual Reality and Engineering Education.

ERIC Educational Resources Information Center

Pantelidis, Veronica S.

1997-01-01

Virtual Reality (VR) offers benefits to engineering education. This article defines VR and describes types; outlines reasons for using VR in engineering education; provides guidelines for using VR; presents a model for determining when to use VR; discusses VR applications; and describes hardware and software needed for a low-budget VR and…

Engineering Education in Bangladesh--An Indicator of Economic Development

ERIC Educational Resources Information Center

Chowdhury, Harun; Alam, Firoz

2012-01-01

Developing nations including Bangladesh are significantly lagging behind the millennium development target due to the lack of science, technology and engineering education. Bangladesh as a least developing country has only 44 engineers per million people. Its technological education and gross domestic product growth are not collinear. Although…

Robert Henry Thurston: Professionalism and Engineering Education

ERIC Educational Resources Information Center

Nienkamp, Paul

2016-01-01

Robert Henry Thurston is presented in this article. He provides one the most significant examples of professionalizing engineering through innovative education and promoting scientific education practices in the late nineteenth century. The son of a draftsmen and steam engine mechanic, Thurston spent his early years in Providence, Rhode Island.…

Voices from the Past: Messages for a STEM Future

ERIC Educational Resources Information Center

Kelley, Todd R.

2012-01-01

The current emphasis in K-12 education on science, technology, engineering, and mathematics (STEM) (Douglas, Iversen, & Kalyandurg, 2004; Sanders, 2009) creates many ways to partner engineering education with these fields. Therefore, it is appropriate to examine the commonalities these fields have with engineering education. Though much of the…

Women in Engineering: Educational Concomitants of a Non-Traditional Career Choice.

ERIC Educational Resources Information Center

Evetts, Julia

1993-01-01

Uses career history data from 15 women in professional engineering careers to examine some educational concomitants of nontraditional career choices. The focus, from an interactionist theoretical perspective, is on how women actually experienced becoming an engineer. The educational influences identified are those perceived by women themselves to…

On the Cost of Engineering Education.

ERIC Educational Resources Information Center

Black, Guy

This study examines how the cost of engineering education changes with the size and characteristics of programs, and tries to establish whether there is some minimum scale at which point engineering education becomes financially viable, and considers the manner in which financial viability is affected by program characteristics. Chapter I presents…

Seeing through the lens of social justice: A threshold for engineering

NASA Astrophysics Data System (ADS)

Kabo, Jens David

In recent times the need for educational research dedicated to engineering education has been recognised. This PhD project is a contribution to the development of engineering education scholarship and the growing body of engineering education research. In this project it was recognised that problem solving is a central activity to engineering. However, it was also recognised that the conditions for doing engineering are changing, especially in light of pressing issues of poverty and environmental sustainability that humanity currently faces, and as a consequence, engineering education needs to emphasise problem definition to a greater extent. One mechanism for achieving this, which has been adopted by some engineering educators in recent years, is through courses that explicitly relate engineering to social justice. However, creating this relationship requires critical interdisciplinary thinking that is alien to most engineering students. In this dissertation it is suggested that for engineering students, and more generally, engineers, looking at their practice and profession through a social justice lens might be seen as a threshold that needs to be crossed. By studying the variation present among students in three different courses at three different North American universities, the intention was to understand how students approach and internalise social justice as a perspective on engineering and/or develop their abilities to think critically. A conceptual model to frame the study was developed by combining elements of threshold concept theory and the educational research methodology, phenomenographic variation theory. All three of the courses studied operated on a similar basic pedagogical model, however, the courses were framed differently, with social justice in the foreground or in the background with the focus on, in one case, ethics and in the other, sustainability. All courses studied appeared to be successful in encouraging engineering students to engage in critical thinking and a similar general trend in the development of students' conceptions of social justice was observed in each of the three courses. However, it does appear that if one is interested in developing an articulated understanding of social justice, with respect to engineering, that an explicit focus on social justice is preferable.

Technology transfer: The key to successful space engineering education

NASA Astrophysics Data System (ADS)

Fletcher, L. S.; Page, R. H.

The 1990s are the threshold of the space revolution for the next century. This space revolution was initiated by space pioneers like Tsiolkovsky, Goddard, and Oberth, who contributed a great deal to the evolution of space exploration, and more importantly, to space education. Recently, space engineering education programs for all ages have been advocated around the world, especially in Asia and Europe, as well as the U.S.A. and the Soviet Union. And yet, although space related technologies are developing rapidly, these technologies are not being incorporated successfully into space education programs. Timely technology transfer is essential to assure the continued education of professionals. This paper reviews the evolution of space engineering education and identifies a number of initiatives which could strengthen space engineering education for the next century.

76 FR 8707 - Syngenta Seeds, Inc.; Determination of Nonregulated Status for Corn Genetically Engineered To...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-15

... for Corn Genetically Engineered To Produce an Enzyme That Facilitates Ethanol Production AGENCY... event 3272, which has been genetically engineered to produce a microbial enzyme that facilitates ethanol... transformation event 3272, which has been genetically engineered to produce a microbial enzyme that facilitates...

The Federal Investment in Science, Mathematics, Engineering, and Technology Education: Where Now? What Next? Report of the Expert Panel for the Review of Federal Education Programs in Science, Mathematics, Engineering, and Technology.

ERIC Educational Resources Information Center

Federal Coordinating Council for Science, Engineering and Technology, Washington, DC.

Despite efforts to improve the quality and equity of science, mathematics, engineering, and technology (SMET) education at all educational levels, the nation remains at risk of losing its competitive edge. This report presents the findings of a special panel convened for two purposes: (1) to review federal programs in SMET education at all levels;…

Regaining America's leading global position in the innovation of science and technology: Increasing engineering program enrollment in higher education

NASA Astrophysics Data System (ADS)

Burklo, Daniel A.

While the United States has always been a global leader in the innovation of science and technology, this leading global position is in jeopardy. As other developing countries produce intellectual capital in the form of engineers at increasing rates, the country will continue to lose ground. Today the need for the country to produce engineers is greater than ever before. Recognizing this need, attempts have been made to increase entrance into engineering fields in higher education by providing STEM (science, technology, engineering, and mathematics) activities during K-12 education. While STEM initiatives create awareness and interest, this study investigates what actually motivates individuals to choose engineering programs in higher education. A quantitative study utilizing survey results from 202 first year engineering students in the state of Ohio illustrates what has motivated them to choose engineering as a major. The study examines who, when, and what motivated the students to choose engineering by examining the relationship of influential people and STEM initiatives participated in during their K-12 education to enrollment in engineering programs at colleges and universities in the state of Ohio. The study proved the general hypothesis that there are influential people in an individual's college choice, such as the parent, and there are time periods during K-12 education when individuals are more motivated, such as the high school years. The study also showed a positive correlation between the motivation toward engineering programs and the number of STEM opportunities in which individuals participated yet there was little difference when comparing the different types of STEM initiatives.

Determinants of child morbidity in Latin America: a pooled analysis of interactions between parental education and economic status.

PubMed

Hatt, Laurel E; Waters, Hugh R

2006-01-01

Diarrhea and respiratory infections account for more than two-fifths of all deaths among children under five. Parental education and economic status are well-known risk factors for child morbidity, but little is known about whether education and economic status operate synergistically or independently to influence children's health. Confirming the presence and direction of such interactions is important to better target education and development policies. Our objective is to test for interactions between parental education and economic status in predicting the risk of diarrhea and respiratory illness among children under five, before and after adjusting for key proximate risk factors. We pool 12 Demographic and Health Surveys (DHS) and nine Living Standards Measurement Surveys (LSMS) from Latin America, creating two large databases. Quintiles of economic status are constructed from principal components asset indices. We use logistic regression to analyze episodes of diarrhea and respiratory illness, and interactions between economic quintile and maternal and paternal education are evaluated via likelihood ratio tests. We find that mother's education and quintile interact synergistically in the DHS data, while results are inconclusive in the LSMS data. The effect of increasing maternal education appears to be more protective for children in wealthy families than for children in poor families. Conversely, improvements in economic status reduce health risks more for children whose mothers are better educated. Father's education is protective and operates independently of economic status. Our findings imply that poverty alleviation efforts occurring in concert with programs to educate women and girls will be more effective for improving children's health than either approach alone.

The United States Air Force Academy: A Bibliography, 2006-2010

DTIC Science & Technology

2011-01-01

Hamilton. “Conceptualizing Engagement: Contributions of Faculty to Student Engagement in Engineering.” Journal of Engineering Education 97.3 (July 2008...and Eric R. Hamilton. “Conceptualizing Engagement: Contributions of Faculty to Student Engagement in Engineering.” Journal of Engineering Education

76 FR 46769 - Applications for New Awards; Minority Science and Engineering Improvement Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-03

... DEPARTMENT OF EDUCATION Applications for New Awards; Minority Science and Engineering Improvement... Information: Minority Science and Engineering Improvement Program (MSEIP) Notice inviting applications for new... effect long-range improvement in science and engineering education at predominantly minority institutions...

Positioning of Engineer Ethics from the Standpoint of a Company. And the Ethics Education Towards Practice

NASA Astrophysics Data System (ADS)

Sato, Masaki

The purpose of a company is contribution to society by operating activities. Therefore, it has a company principle and “Business ethics” conduct codes in each. On the other hand, many engineers with specialties are performing business toward the same purpose at the same company. And it will produce new inconsistency by introducing “Engineer ethics” and “the ethics of each professional” all at once in the situation of that company. Then, the engineer ethics education in company needs to carry out by arranging company conduct codes and Engineer ethics. This paper proposes what the company ethics education should be from exemplifying results by make activities and engineer ethics education of the corporate ethics observance in the Tokyo Electric Power Co., Inc.

A psychological model that integrates ethics in engineering education.

PubMed

Magun-Jackson, Susan

2004-04-01

Ethics has become an increasingly important issue within engineering as the profession has become progressively more complex. The need to integrate ethics into an engineering curriculum is well documented, as education does not often sufficiently prepare engineers for the ethical conflicts they experience. Recent research indicates that there is great diversity in the way institutions approach the problem of teaching ethics to undergraduate engineering students; some schools require students to take general ethics courses from philosophical or religious perspectives, while others integrate ethics in existing engineering courses. The purpose of this paper is to propose a method to implement the integration of ethics in engineering education that is pedagogically based on Kohlberg's stage theory of moral development.

Engines without Fuel?--Empirical Findings on Finnish Higher Education Institutions as Education Exporters

ERIC Educational Resources Information Center

Schatz, Monika

2016-01-01

In 2010, the Finnish Ministry of Education and Culture formulated Finland's first education export strategy. This policy document attributed Finnish Higher Education Institutions (HEIs) a significant role in the emerging sector by declaring them as "engines" of education export. Situated in a phenomenological approach towards…

40 CFR 63.526 - Monitoring requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... vent. (D) Design analysis based on accepted chemical engineering principles, measurable process.... (i) For the purpose of determining de minimis status for emission points, engineering assessment may... operating conditions expected to yield the highest flow rate and concentration. Engineering assessment...

40 CFR 63.526 - Monitoring requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... vent. (D) Design analysis based on accepted chemical engineering principles, measurable process.... (i) For the purpose of determining de minimis status for emission points, engineering assessment may... operating conditions expected to yield the highest flow rate and concentration. Engineering assessment...

40 CFR 63.526 - Monitoring requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... vent. (D) Design analysis based on accepted chemical engineering principles, measurable process.... (i) For the purpose of determining de minimis status for emission points, engineering assessment may... operating conditions expected to yield the highest flow rate and concentration. Engineering assessment...

Possibility of Engineering Education That Makes Use of Algebraic Calculators by Various Scenes

NASA Astrophysics Data System (ADS)

Umeno, Yoshio

Algebraic calculators are graphing calculators with a feature of computer algebra system. It can be said that we can solve mathematics only by pushing some keys of these calculators in technical colleges or universities. They also possess another feature, so we can make extensive use in engineering education. For example, we can use them for a basic education, a programming education, English education, and creative thinking tools for excellent students. In this paper, we will introduce the summary of algebraic calculators, then, consider how we utilize them in engineer education.

ADHD, depression, and motor vehicle crashes: A prospective cohort study of continuously-monitored, real-world driving.

PubMed

Aduen, Paula A; Kofler, Michael J; Sarver, Dustin E; Wells, Erica L; Soto, Elia F; Cox, Daniel J

2018-06-01

ADHD is associated with automobile crashes, traffic fatalities, and serious road trauma, but it is unclear whether this risk is (a) driven by ADHD symptoms specifically, and (b) unique to ADHD or transdiagnostic across psychiatric disabilities, such as depression, that also have concentration problems as core symptoms. The current study provides the first prospective, continuously-monitored evaluation of crash risk related to ADHD symptoms, including the first on-road comparison of ADHD with another high-prevalence psychiatric disability (depression). A probability-based sample of 3226 drivers from six U.S. sites, including subsamples with self-reported ADHD (n = 274) and depression (n = 251), consented to have their vehicles outfitted with sophisticated data acquisition technologies to continuously monitor real-world, day-to-day driving from 'engine-on to engine-off' for 1-2 years (Mean = 440 consecutive days/driver, Mean = 9528 miles/driver). Crashes and near-crashes were objectively identified via software-based algorithms and double-coded manual validation (blinded to clinical status). Miles driven, days monitored, age, gender, education, and marital status were controlled. ADHD symptoms portended 5% increased crash risk per increase in symptom severity score (IRR = 1.05). This risk corresponded to approximately 1 biennial crash and 1 annual near-crash per driver with ADHD; crash risk doubled for drivers reporting ADHD symptom severity near the sample's maximum. Analyses based on self-reported clinical status indicated similarly elevated rates for ADHD (IRR = 1.46) and depression (IRR = 1.34) that may be related, in part, to both groups' inattention/concentration symptoms. Risk was not attenuated by ADHD usual treatment, but varied according to antidepressant medication status. Previous studies have significantly underestimated the risk for traffic crashes conveyed by ADHD and depression. Copyright © 2018 Elsevier Ltd. All rights reserved.

Development Status of Reusable Rocket Engine

NASA Astrophysics Data System (ADS)

Yoshida, Makoto; Takada, Satoshi; Naruo, Yoshihiro; Niu, Kenichi

A 30-kN rocket engine, a pilot engine, is being developed in Japan. Development of this pilot engine has been initiated in relation to a reusable sounding rocket, which is also being developed in Japan. This rocket takes off vertically, reaches an altitude of 100 km, lands vertically at the launch site, and is launched again within several days. Due to advantage of reusability, successful development of this rocket will mean that observation missions can be carried out more frequently and economically. In order to realize this rocket concept, the engines installed on the rocket should be characterized by reusability, long life, deep throttling and health monitoring, features which have not yet been established in Japanese rocket engines. To solve the engineering factors entitled by those features, a new design methodology, advanced engine simulations and engineering testing are being focused on in the pilot engine development stage. Especially in engineering testing, limit condition data is acquired to facilitate development of new diagnostic techniques, which can be applied by utilizing the mobility of small-size hardware. In this paper, the development status of the pilot engine is described, including fundamental design and engineering tests of the turbopump bearing and seal, turbine rig, injector and combustion chamber, and operation and maintenance concepts for one hundred flights by a reusable rocket are examined.

Project Alexander the Great: a study on the world proliferation of bioengineering/biomedical engineering education.

PubMed

Abu-Faraj, Ziad O

2008-01-01

Bioengineering/Biomedical Engineering is considered amongst the most reputable fields within the global arena, and will likely be the primer for any future breakthroughs in Medicine and Biology. Bioengineering/biomedical engineering education has evolved since late 1950s and is undergoing advancement in leading academic institutions worldwide. This paper delineates an original study on the world proliferation of bioengineering/biomedical engineering education and bears the name 'Project Alexander the Great'. The initial step of the project was to survey all 10448 universities, recognized by the International Association of Universities, spread among the 193 member states of the United Nations within the six continents. The project aims at identifying, disseminating, and networking, through the world-wide-web, those institutions of higher learning that provide bioengineering/biomedical engineering education. The significance of this project is multifold: i) the inception of a web-based 'world-map' in bioengineering/biomedical engineering education for the potential international student desiring to pursue a career in this field; ii) the global networking of bioengineering/biomedical engineering academic/research programs; iii) the promotion of first-class bioengineering/biomedical engineering education and the catalysis of global proliferation of this field; iv) the erection of bridges among educational institutions, industry, and professional societies or organizations involved in Bioengineering/Biomedical Engineering; and v) the catalysis in the establishment of framework agreements for cooperation among the identified institutions offering curricula in this field. This paper presents the results obtained from Africa and North America. The whole project is due to be completed by 2009.

RFID-Based Multidisciplinary Educational Platform to Improve the Engineering and Technology Curriculums

ERIC Educational Resources Information Center

Yelamarthi, Kumar

2012-01-01

Multidisciplinary projects involving electrical engineering (EE), mechanical engineering (ME), and computer engineering (CE) students are both exciting and difficult to conceptualize. Answering this challenge, this paper presents a multidisciplinary educational platform on radio frequency identification-based assistive devices. The combination of…

Requirements for Continuing Engineering Education in Israel.

ERIC Educational Resources Information Center

Brandon, D. G.; Nir, D.

1985-01-01

The population of practicing engineers in Israel was analyzed by age, specialization, and country of training. These results were compared with results of a questionnaire survey of Israeli engineering graduates on the need for continuing engineering education in Israel. Results are reported and discussed. (JN)

Environmental Science and Engineering Merit Badges: An Exploratory Case Study of a Non-Formal Science Education Program and the U.S. Scientific and Engineering Practices

ERIC Educational Resources Information Center

Vick, Matthew E.; Garvey, Michael P.

2016-01-01

The Boy Scouts of America's Environmental Science and Engineering merit badges are two of their over 120 merit badges offered as a part of a non-formal educational program to U.S. boys. The Scientific and Engineering Practices of the U.S. Next Generation Science Standards provide a vision of science education that includes integrating eight…

A national collaboration process: Finnish engineering education for the benefit of people and environment.

PubMed

Takala, A; Korhonen-Yrjänheikki, K

2013-12-01

The key stakeholders of the Finnish engineering education collaborated during 2006-09 to reform the system of education, to face the challenges of the changing business environment and to create a national strategy for the Finnish engineering education. The work process was carried out using participatory work methods. Impacts of sustainable development (SD) on engineering education were analysed in one of the subprojects. In addition to participatory workshops, the core part of the work on SD consisted of a research with more than 60 interviews and an extensive literature survey. This paper discusses the results of the research and the work process of the Collaboration Group in the subproject of SD. It is suggested that enhancing systematic dialogue among key stakeholders using participatory work methods is crucial in increasing motivation and commitment in incorporating SD in engineering education. Development of the context of learning is essential for improving skills of engineering graduates in some of the key abilities related to SD: systemic- and life-cycle thinking, ethical understanding, collaborative learning and critical reflection skills. This requires changing of the educational paradigm from teacher-centred to learner-centred applying problem- and project-oriented active learning methods.

Enhancing Engineering Computer-Aided Design Education Using Lectures Recorded on the PC

ERIC Educational Resources Information Center

McGrann, Roy T. R.

2006-01-01

Computer-Aided Engineering (CAE) is a course that is required during the third year in the mechanical engineering curriculum at Binghamton University. The primary objective of the course is to educate students in the procedures of computer-aided engineering design. The solid modeling and analysis program Pro/Engineer[TM] (PTC[R]) is used as the…

Engineering Infrastructure Diagramming and Modeling. Engineering Education and Practice in The United States.

ERIC Educational Resources Information Center

National Academy of Sciences - National Research Council, Washington, DC. Commission on Engineering and Technical Systems.

This report forms an integral part of a study conducted by the Committee on the Education and Utilization of the Engineer, under the auspices of the National Research Council. Five major tasks undertaken by the panel were: (1) defining engineering; (2) determining influences on the engineering community, including external influences and internal…

Mainstreaming and Postsecondary Educational and Employment Status of a Rubella Cohort.

ERIC Educational Resources Information Center

Kasen, Stephanie; And Others

1990-01-01

The postsecondary education and work status of 46 rubella deaf young adults was described and evaluated as an outcome of ethnicity, socioeconomic status, preschool attendance, early parent involvement, and degree of prior mainstreaming. Prior mainstreaming was a determinant of postsecondary education attendance over and above the effects of…

Football as a Status System in U.S. Higher Education

ERIC Educational Resources Information Center

Lifschitz, Arik; Sauder, Michael; Stevens, Mitchell L.

2014-01-01

Sociologists have focused almost exclusively on academic aspects of status in higher education, despite the prominence of nonacademic activities, specifically athletics, in U.S. colleges and universities. We use the case of football to investigate whether intercollegiate sports influence the distribution of status in U.S. higher education.…

The Status of Preservice Education in Career and Technology Education.

ERIC Educational Resources Information Center

Bruening, Thomas H.; Scanlon, Dennis C.; Hodes, Carol L.

A study collected baseline data about the status of teacher preservice Career and Technology Education (CTE) from program chairs at colleges and universities in the United Status. The survey had six sections: pedagogical competencies for CTE teachers, CTE certification process, course delivery, recent program revisions, CTE program demographics,…

Socioeconomic Outcomes from Adult Education.

ERIC Educational Resources Information Center

Gooderham, Paul N.

1991-01-01

The degree to which age and gender influence completion of higher secondary education (HSE) and employment status was measured with a sample of 350 Norwegian adults. Application of a Status Attainment model revealed that post-HSE educational attainment is an important determinant of socioeconomic status for both men and women. (SK)

To Educate Engineers or to Engineer Educators?: Exploring Access to Engineering Careers

ERIC Educational Resources Information Center

Eastman, Michael G.; Christman, Jeanne; Zion, George H.; Yerrick, Randy

2017-01-01

Although studies claim increases in underrepresented populations choosing STEM majors, barriers to retention, and higher education degree completion in STEM still exist. This study examined efforts of a prominent technical university to attract and retain urban high school graduates through a tuition scholarship program. We sought to determine the…

Engineering in Elementary STEM Education: Curriculum Design, Instruction, Learning, and Assessment

ERIC Educational Resources Information Center

Cunningham, Christine M.

2018-01-01

Bolstered by new standards and new initiatives to promote STEM education, engineering is making its way into the school curriculum. This comprehensive introduction will help elementary educators integrate engineering into their classroom, school, or district in age-appropriate, inclusive, and engaging ways. Building on the work of a Museum of…

Identifying Characteristics of Technology and Engineering Teachers Striving for Excellence Using a Modified Delphi

ERIC Educational Resources Information Center

Rose, Mary Annette; Shumway, Steven; Carter, Vinson; Brown, Josh

2015-01-01

Preparing a technology and engineering (TE) teacher who strives for teaching excellence is a fundamental mission of TE teacher education programs in the United States. In 2012, the International Technology and Engineering Educators Association (ITEEA, formerly the International Technology Education Association, ITEA) Council on Technology and…

Project ITCH: Interactive Digital Simulation in Electrical Engineering Education.

ERIC Educational Resources Information Center

Bailey, F. N.; Kain, R. Y.

A two-stage project is investigating the educational potential of a low-cost time-sharing system used as a simulation tool in Electrical Engineering (EE) education. Phase I involves a pilot study and Phase II a full integration. The system employs interactive computer simulation to teach engineering concepts which are not well handled by…

P-12 Engineering Education Research and Practice

ERIC Educational Resources Information Center

Moore, Tamara; Richards, Larry G.

2012-01-01

This special issue of "Advances in Engineering Education" explores recent developments in P-12 Engineering Education. It includes papers devoted to research and practice, and reports some of the most exciting work in the field today. In our Call of Papers, we solicited two types of papers: Research papers and Practice papers. The former…

Current Developments in the French Engineering Education System

ERIC Educational Resources Information Center

Lemaître, Denis

2017-01-01

The French engineering education system has been established in quite a different way from others in Europe, such as the German and British systems, for instance. Due to both the whole state system and the private initiatives during the industrial revolution, the engineering education system today is composed of a large number (nearly 200) of…

The Usability of a Commercial Game Physics Engine to Develop Physics Educational Materials: An Investigation

ERIC Educational Resources Information Center

Price, Colin B.

2008-01-01

Commercial computer games contain "physics engine" components, responsible for providing realistic interactions among game objects. The question naturally arises of whether these engines can be used to develop educational materials for high school and university physics education. To answer this question, the author's group recently conducted a…

A Strategic Approach for Supporting the Future of Civil Engineering Education in Europe

ERIC Educational Resources Information Center

Angelides, Demos C.; Loukogeorgaki, Eva

2005-01-01

A new strategic vision of the extensively debated European higher education is proposed with focus on civil engineering. Civil engineering education for the future is considered with relevance to potential world-wide trends and anticipated societal requirements and, therefore, required employee qualifications of the construction-related providers…

Engineering Education: A Clear Content Base for Standards

ERIC Educational Resources Information Center

Grubbs, Michael E.; Strimel, Greg J.; Huffman, Tanner

2018-01-01

Interest in engineering at the P-12 level has increased in recent years, largely in response to STEM educational reform. Despite greater attention to the value, importance, and use of engineering for teaching and learning, the educational community has engaged minimally in its deliberate and coherent study. Specifically, few efforts have been…

Predictors of Effective Leadership in Industry--Should Engineering Education Focus on Traditional Intelligence, Personality, or Emotional Intelligence?

ERIC Educational Resources Information Center

Lappalainen, Pia

2015-01-01

Despite the changing global and industrial conditions requiring new approaches to leadership, management training as part of higher engineering education still remains understudied. The subsequent gap in engineering education calls for research on today's leader requirements and pedagogy supporting the inclusion of management competence in higher…

Research and Exploration for Operational Research Education in Industry and Engineering Subject

ERIC Educational Resources Information Center

Wu, Yu-hua; Wang, Feng-ming; Du, Gang

2007-01-01

On the basic of exploring the relationship of industry engineering and operational research technique, the thesis analyzes the location and utility of the operational research education in the whole industry engineering subject education. It brings forward the system design about operational research and relative class among industry engineering…

Inquiry by Engineering Design: Applying the Sixth "E"

ERIC Educational Resources Information Center

Brand, Brenda; Kasarda, Mary; Williams, Christopher Bryant

2017-01-01

As the emphasis on STEM education increases, the "E" (engineering) in the acronym is gaining more attention in K-12 education. K-12 educators are urged to develop new and creative strategies for engaging youth in science and engineering activities that encourage them to be inventors and not just consumers. The Inquiry By Engineering…

Women Studies in Engineering Education: Content Analysis in Three Referred Journals

ERIC Educational Resources Information Center

Chou, Pao-Nan

2013-01-01

Little is known about the research characteristics of past women studies in engineering education. In order to add knowledge base about the advanced development of women studies in current engineering education research, the purpose of the study is to investigate research characteristics of past women studies published in three referred…

Development of a Taxonomy of Keywords for Engineering Education Research

ERIC Educational Resources Information Center

Finelli, Cynthia J.; Borrego, Maura; Rasoulifar, Golnoosh

2016-01-01

The diversity of engineering education research provides an opportunity for cross-fertilisation of ideas and creativity, but it also can result in fragmentation of the field and duplication of effort. One solution is to establish a standardised taxonomy of engineering education terms to map the field and communicate and connect research…

Women in Engineering Education. Studies in Engineering Education 12.

ERIC Educational Resources Information Center

Michel, Jean

Engineering in higher education has the lowest proportion of women students when compared with other fields of study. This book discusses the issues and problems that face the training and promotion of women at the university level. Part one discusses the background and trends of female participation in different regions and disciplines of higher…

Technology Education to Engineering: A Good Move?

ERIC Educational Resources Information Center

Williams, P. John

2010-01-01

Recent curriculum changes in the educational system of Australia have resulted in allowing optional Engineering course work to count for university entrance for students choosing to apply to a university. In other educational systems, Engineering is playing an increasingly important role, either as a stand-alone subject or as part of an integrated…

Standards for K-12 Engineering Education?

ERIC Educational Resources Information Center

National Academies Press, 2010

2010-01-01

The goal of this study was to assess the value and feasibility of developing and implementing content standards for engineering education at the K-12 level. Content standards have been developed for three disciplines in STEM education--science, technology, and mathematic--but not for engineering. To date, a small but growing number of K-12…

Association of Educational Level and Marital Status With Obesity: A Study of Chinese Twins.

PubMed

Liao, Chunxiao; Gao, Wenjing; Cao, Weihua; Lv, Jun; Yu, Canqing; Wang, Shengfeng; Li, Chunxiao; Pang, Zengchang; Cong, Liming; Dong, Zhong; Wu, Fan; Wang, Hua; Wu, Xianping; Jiang, Guohong; Wang, Xiaojie; Wang, Binyou; Li, Liming

2018-04-01

The prevalence of overweight and obesity is growing rapidly in many countries. Socioeconomic inequalities might be important for this increase. The aim of this study was to determine associations of body mass index (BMI), overweight and obesity with educational level and marital status in Chinese twins. Participants were adult twins recruited through the Chinese National Twin Registry (CNTR), aged 18 to 79 years, and the sample comprised 10,448 same-sex twin pairs. Current height, weight, educational attainment, and marital status were self-reported. Regression analyses and structural equation models were conducted to evaluate BMI, overweight, and obesity associated with educational level and marital status in both sexes. At an individual level, both educational level and marital status were associated with higher BMI and higher risk of being overweight and obesity in men, while in women the effects of educational level on BMI were in the opposite direction. In within-Monozygotic (MZ) twin-pair analyses, the effects of educational level on BMI disappeared in females. Bivariate structural equation models showed that genetic factors and shared environmental confounded the relationship between education and BMI in females, whereas marital status was associated with BMI on account of significant positive unique environmental correlation apart in both sexes. The present data suggested that marital status and BMI were associated, independent of familiar factors, for both sexes of this study population, while common genetic and shared environmental factors contributed to education-associated disparities in BMI in females.

The Impact of Educational Status on 10-Year (2004-2014) Cardiovascular Disease Prognosis and All-cause Mortality Among Acute Coronary Syndrome Patients in the Greek Acute Coronary Syndrome (GREECS) Longitudinal Study.

PubMed

Notara, Venetia; Panagiotakos, Demosthenes B; Kogias, Yannis; Stravopodis, Petros; Antonoulas, Antonis; Zombolos, Spyros; Mantas, Yannis; Pitsavos, Christos

2016-07-01

The association between educational status and 10-year risk for acute coronary syndrome (ACS) and all-cause mortality was evaluated. From October 2003 to September 2004, 2172 consecutive ACS patients from six Greek hospitals were enrolled. In 2013 to 2014, a 10-year follow-up (2004-2014) assessment was performed for 1918 participants (participation rate, 88%). Each patient's educational status was classified as low (<9 years of school), intermediate (9 to 14 years), or high (>14 years). Overall all-cause mortality was almost twofold higher in the low-education group than in the intermediate-education and high-education groups (40% vs. 22% and 19%, respectively, p<0.001). Additionally, 10-year recurrent ACS events (fatal and non-fatal) were more common in the low-education group than in the intermediate-education and high-education groups (42% vs. 30% and 35%, p<0.001), and no interactions between sex and education on the investigated outcomes were observed. Moreover, patients in the high-education group were more physically active, had a better financial status, and were less likely to have hypertension, diabetes, or ACS than the participants with the least education (p<0.001); however, when those characteristics and lifestyle habits were accounted for, no moderating effects regarding the relationship of educational status with all-cause mortality and ACS events were observed. A U-shaped association may be proposed for the relationship between ACS prognosis and educational status, with participants in the low-education and high-education groups being negatively affected by other factors (e.g., job stress, depression, or loneliness). Public health policies should be aimed at specific social groups to reduce the overall burden of cardiovascular disease morbidity.

A Report on the Status of Women in Education: Achieving Gender Equity for Women and Girls

ERIC Educational Resources Information Center

Mobley, Pamela Rios

2010-01-01

In 2005, the National Education Association (NEA) began publishing a series of reports on the status of underserved groups in education. This report on the status of women and girls is based on the principle that every student has the human and civil right to a quality public education. America's public schools are expected to serve the needs of…

The primary parental investment in children in the contemporary USA is education : Testing the Trivers-Willard hypothesis of parental investment.

PubMed

Hopcroft, Rosemary L; Martin, David O

2014-06-01

This paper tests the Trivers-Willard hypothesis that high-status individuals will invest more in sons and low-status individuals will invest more in daughters using data from the 2000 to 2010 General Social Survey and the 1979 National Longitudinal Survey of Youth. We argue that the primary investment U.S. parents make in their children is in their children's education, and this investment is facilitated by a diverse market of educational choices at every educational level. We examine two measures of this investment: children's years of education and the highest degree attained. Results show that sons of high-status fathers receive more years of education and higher degrees than daughters, whereas daughters of low-status fathers receive more years of education and higher degrees than sons. Further analyses of possible mechanisms for these findings yield null results. We also find that males are more likely to have high-status fathers than females.

The Gap between Engineering Education and Postgraduate Preparedness

ERIC Educational Resources Information Center

Warsame, Abdulla Farah

2017-01-01

Engineering students entering the workforce often struggle to meet the competency expectations of their employers. Guided by constructivist theory, the purpose of this case study was to understand engineers' experiences of engineering education, deficiencies in practical skills, and the self-learning methods they employed to advance their…

Engineering Graphics in Education: Programming and Ready Programs.

ERIC Educational Resources Information Center

Audi, M. S.

1987-01-01

Suggests a method of integrating teaching microcomputer graphics in engineering curricula without encroaching on the fundamental engineering courses. Includes examples of engineering graphics produced by commercial programs and others produced by high-level language programing in a limited credit hour segment of an educational program. (CW)

Civil Engineering: Improving the Quality of Life.

ERIC Educational Resources Information Center

One Feather, Sandra

2002-01-01

American Indian civil engineers describe the educational paths that led them to their engineering careers, applications of civil engineering in reservation communities, necessary job skills, opportunities afforded by internship programs, continuing education, and the importance of early preparation in math and science. Addresses of 12 resource Web…

75 FR 22576 - Minority Science and Engineering Improvement Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-29

... DEPARTMENT OF EDUCATION [CFDA No. 84.120A] Minority Science and Engineering Improvement Program... the fiscal year (FY) 2009 grant slate for the Minority Science and Engineering Improvement Program... Engineering Improvement Program (MSEIP), authorized by Title III, Part E of the Higher Education Act of 1965...

Handbook of data on selected engine components for solar thermal applications

NASA Technical Reports Server (NTRS)

1979-01-01

A data base on developed and commercially available power conversion system components for Rankine and Brayton cycle engines, which have potential application to solar thermal power-generating systems is presented. The status of the Stirling engine is discussed.

40 CFR 63.526 - Monitoring requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

.... (D) Design analysis based on accepted chemical engineering principles, measurable process parameters... purpose of determining de minimis status for emission points, engineering assessment may be used to... expected to yield the highest flow rate and concentration. Engineering assessment includes, but is not...

40 CFR 63.526 - Monitoring requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... (D) Design analysis based on accepted chemical engineering principles, measurable process parameters... purpose of determining de minimis status for emission points, engineering assessment may be used to... expected to yield the highest flow rate and concentration. Engineering assessment includes, but is not...

Development status of rotary engine at Toyo Kogyo. [for general aviation aircraft

NASA Technical Reports Server (NTRS)

Yamamoto, K.

1978-01-01

Progress in the development of rotary engines which use a thermal reactor as the primary part of the exhaust emission control system is reviewed. Possibilities of further improvements in fuel economy of future rotary engines are indicated.

Career Education in Japan: Its Current Status and Condition.

ERIC Educational Resources Information Center

Senzaki, Takeshi

1993-01-01

Presents framework of changing status of career education in Japan, describing history of career education in that country. Includes chronology of career education in Japan since 1960. Notes that, in future, Japanese career education and guidance programs must bridge gaps between academics and employment, education and occupations, school and…

The State University at Ghent, Belgium, Educates Engineers in Rwanda.

ERIC Educational Resources Information Center

Van Impe, W. F.

1989-01-01

Describes the historical development and programs of engineering education at the University of Rwanda in cooperation with a Belgium university. Provides lists of courses for electromechanical and civil engineering programs. (YP)

Chemical Engineering Education Revisited.

ERIC Educational Resources Information Center

Theodore, Louis

1978-01-01

The opinion is presented that chemical engineering education seems to emphasize the professor's research and/or professional interests with little regard for the real needs of the student who intends to become a practicing engineer. (BB)

ISTAR: Project Status and Ground Test Engine Design

NASA Technical Reports Server (NTRS)

Quinn, Jason Eugene

2003-01-01

Review of the current technical and programmatic status of the Integrated System Test of an Airbreathing Rocket (ISTAR) project. November 2002 completed Phase 1 of this project: which worked the conceptual design of the X-43B demonstrator vehicle and Flight Test Engine (FTE) order to develop realistic requirements for the Ground Test Engine (GTE). The latest conceptual FTE and X-43B configuration is briefly reviewed. The project plan is to reduce risk to the GTE and FTE concepts through several tests: thruster, fuel endothermic characterization, engine structure/heat exchanger, injection characterization rig, and full scale direct connect combustion rig. Each of these will be discussed along with the project schedule. This discussion is limited due to ITAR restrictions on open literature papers.

System status display information

NASA Technical Reports Server (NTRS)

Summers, L. G.; Erickson, J. B.

1984-01-01

The system Status Display is an electronic display system which provides the flight crew with enhanced capabilities for monitoring and managing aircraft systems. Guidelines for the design of the electronic system displays were established. The technical approach involved the application of a system engineering approach to the design of candidate displays and the evaluation of a Hernative concepts by part-task simulation. The system engineering and selection of candidate displays are covered.

NASA GRC MBSE Implementation Status

NASA Technical Reports Server (NTRS)

Parrott, Edith; Trase, Katie; Green, Randi; Varga, Denise; Powell, Joe

2016-01-01

This presentation gives a brief overview on GRCs Model Based System Engineering (MBSE) implementation status. This overview covers: history, project usage and implementation, challenges and future work.

Sharing best practices in teaching biomedical engineering design.

PubMed

Allen, R H; Acharya, S; Jancuk, C; Shoukas, A A

2013-09-01

In an effort to share best practices in undergraduate engineering design education, we describe the origin, evolution and the current status of the undergraduate biomedical engineering design team program at Johns Hopkins University. Specifically, we describe the program and judge the quality of the pedagogy by relating it to sponsor feedback, project outcomes, external recognition and student satisfaction. The general pedagogic practices, some of which are unique to Hopkins, that have worked best include: (1) having a hierarchical team structure, selecting team leaders the Spring semester prior to the academic year, and empowering them to develop and manage their teams, (2) incorporating a longitudinal component that incudes freshmen as part of the team, (3) having each team choose from among pre-screened clinical problems, (4) developing relationships and fostering medical faculty, industry and government to allow students access to engineers, clinicians and clinical environments as needed, (5) providing didactic sessions on topics related to requirements for the next presentation, (6) employing judges from engineering, medicine, industry and government to evaluate designs and provide constructive criticisms approximately once every 3-4 weeks and (7) requiring students to test the efficacy of their designs. Institutional support and resources are crucial for the design program to flourish. Most importantly, our willingness and flexibility to change the program each year based on feedback from students, sponsors, outcomes and judges provides a mechanism for us to test new approaches and continue or modify those that work well, and eliminate those that did not.

Importance of Engineering History Education

NASA Astrophysics Data System (ADS)

Arakawa, Fumio

It is needless to cite the importance of education for succeed of engineering. IEEJ called for the establishment of ICEE in 1994, where the education is thought highly of, though its discussion has not been well working. Generally speaking, education has been one of the most important national strategies particularly at a time of its political and economical development. The science and technology education is, of course, not the exemption. But in these days around 2000 it seems that the public pays little attention on the science and technology, as they are quite day to day matters. As the results, for instance, such engineering as power systems and electric heavy machines are referred to as “endangered”. So fur, many engineers have tried not to be involved in social issues. But currently they can not help facing with risks of social issues like patent rights, troubles and accidents due to application of high technology, information security in the use of computers and engineering ethics. One of the most appropriate ways for the risk management is to learn lessons in the past, that is, history, so that the idea suggested in it could be made full use for the risk management. The author cited the global importance of education, particularly of engineering history education for engineering ethics, in the ICEE 2010 held in Bussan, Korea, as the 16th anniversary.

Undergraduate environmental engineering education in China

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, C.; Bero, B.N.

1999-07-01

In this paper, the development process, present situations, causes of improvement, and trends of higher education of environmental engineering in China are discussed. Several education modes in environmental engineering in China are also presented. The development process can be divided into three stages: the beginning stage, the expansion stage, and the modification stage. The 1970's and early 1980's wake of environmental consciousness and serious pollution situation in China resulted in about 20 universities setting up an environmental engineering specialty. The late 1980's and middle 1990's job opportunities for undergraduates in China resulted in many universities' creation of the environmental engineeringmore » specialty from specialties such as geography, geology, hydrology, mining engineering, and mineral separation engineering where job opportunities were stagnant. At present, adjustment and improvement of environmental engineering education are urgently required because of the excessive increase of undergraduate number, change of job opportunities and implementation of five-work-day system in China. Other problems include how to determine the ratio of social science courses to engineering science courses, how to determine the relationship of fundamental and applied courses, and how to determine the specialized direction. Hunan University, as a typical university conferring an accredited Bachelor degree in Environmental Engineering in four academic years in China, has been improving the instruction schedule for undergraduate education in environmental engineering. The curricula of the three phases for undergraduates of environmental engineering specialty at Hunan University are presented as a case study.« less

Delivering Core Engineering Concepts to Secondary Level Students

ERIC Educational Resources Information Center

Merrill, Chris; Custer, Rodney L.; Daugherty, Jenny; Westrick, Martin; Zeng, Yong

2008-01-01

Through the efforts of National Center for Engineering and Technology Education (NCETE), three core engineering concepts within the realm of engineering design have emerged as crucial areas of need within secondary level technology education. These concepts are constraints, optimization, and predictive analysis (COPA). COPA appears to be at the…

A Novel Approach to Physiology Education for Biomedical Engineering Students

ERIC Educational Resources Information Center

DiCecco, J.; Wu, J.; Kuwasawa, K.; Sun, Y.

2007-01-01

It is challenging for biomedical engineering programs to incorporate an indepth study of the systemic interdependence of cells, tissues, and organs into the rigorous mathematical curriculum that is the cornerstone of engineering education. To be sure, many biomedical engineering programs require their students to enroll in anatomy and physiology…

The European Engineer: A British Civil Engineering Viewpoint.

ERIC Educational Resources Information Center

Fleming, George

1988-01-01

Confronts the problems of defining the European Engineer in terms of educational and practical training. Analyzes the supply and demand requirements of engineering management and practice. Compares these analyses with conditions in the United States. Gives details of the educational process in a number of European countries. (CW)

Guidelines for Engineering Teachers Concerning Educating the Engineer for Innovative and Entrepreneurial Activity.

ERIC Educational Resources Information Center

Eekels, J.

1987-01-01

Emphasizes that the concept of design is fundamental in innovation. Outlines the work of the European Society for Engineering Education-Working group on Innovation. Describes the innovation-management stream in the curriculum of the faculty of Industrial Design Engineering at Delft University of Technology, Netherlands. (CW)

Sustainable Development in Engineering Education: A Pedagogical Approach

ERIC Educational Resources Information Center

Ahrens, A.; Zascerinska, J.

2012-01-01

Engineering education is facing a challenge of the development of student engineers' social responsibility in the context of sustainable development. The aim of the research is to analyze efficiency of engineering curriculum in the context of sustainable development underpinning elaboration of pedagogical guidelines on the development of students'…

Examining Elementary School Students' Transfer of Learning through Engineering Design Using Think-Aloud Protocol Analysis

ERIC Educational Resources Information Center

Kelley, Todd; Sung, Euisuk

2017-01-01

The introduction of engineering practices within the "Next Generation Science Standards" provides technology educators with opportunities to help STEM educators infuse engineering design within a core curriculum. The introduction of teaching engineering design in early elementary grades also provides opportunities to conduct research…

The Role of Industry in Minority Engineering Programs.

ERIC Educational Resources Information Center

Branigan, Thomas L.

Until recently, U.S. engineering education and American industry drew candidates from only about 43 percent of the potential market--white males. Many segments of American business, education, and government have been involved in a process to increase minority participation in engineering; the 1974 freshmen engineering enrollment for women…

Traditional Engineering Graphics versus Computer-Aided Drafting: A View from Academe.

ERIC Educational Resources Information Center

Foster, Robert J.

1987-01-01

Argues for a legitimate role of manually expressed engineering graphics within engineering education as a needed support for computer-assisted drafting work. Discusses what and how students should learn as well as trends in engineering graphics education. Compares and contrasts manual and computer drafting methods. (CW)

Graduate Engineering Education Today

ERIC Educational Resources Information Center

Pettit, Joseph M.; Gere, James M.

1969-01-01

Describes rapid growth of graduate education in engineering between 1900 and 1969. Points out need for graduate curricula in engineering that are both practical and research-oriented. Adapted from paper presented at International Conference on the Trends in the Teaching and Training of Engineers, Paris, France, December 9-13, 1968, and at Second…

Engineering Graphics Educational Outcomes for the Global Engineer: An Update

ERIC Educational Resources Information Center

Barr, R. E.

2012-01-01

This paper discusses the formulation of educational outcomes for engineering graphics that span the global enterprise. Results of two repeated faculty surveys indicate that new computer graphics tools and techniques are now the preferred mode of engineering graphical communication. Specifically, 3-D computer modeling, assembly modeling, and model…

Enabling Engineering Student Success: The Final Report for the Center for the Advancement of Engineering Education. CAEE-TR-10-02

ERIC Educational Resources Information Center

Atman, Cynthia J.; Sheppard, Sheri D.; Turns, Jennifer; Adams, Robin S.; Fleming, Lorraine N.; Stevens, Reed; Streveler, Ruth A.; Smith, Karl A.; Miller, Ronald L.; Leifer, Larry J.; Yasuhara, Ken; Lund, Dennis

2010-01-01

Today's engineering graduates will solve tomorrow's problems in a world that is advancing faster and facing more critical challenges than ever before. This situation creates significant demand for engineering education to evolve in order to effectively prepare a diverse community of engineers for these challenges. Such concerns have led to the…

Engineering Student Outcomes for Grades 9-12. Research in Engineering and Technology Education

ERIC Educational Resources Information Center

Childress, Vincent; Rhodes, Craig

2006-01-01

This research study was conducted during the 2005-2006 academic year. Its purpose is to help the National Center for Engineering and Technology Education determine those engineering outcomes that should be studied in high school when the high school student intends to pursue engineering in college. The results of the study will also be used to…

Where Is the Engineering I Applied For? A Longitudinal Study of Students' Transition into Higher Education Engineering, and Their Considerations of Staying or Leaving

ERIC Educational Resources Information Center

Holmegaard, Henriette Tolstrup; Madsen, Lene Møller; Ulriksen, Lars

2016-01-01

This paper presents results from a qualitative longitudinal study of students' transition into higher education engineering. The study aims at comparing upper-secondary school students' expectations of engineering with their actual experiences when encountering the engineering programme. It explores how this encounter provides a platform for…

Life-long intellectual activities mediate the predictive effect of early education on cognitive impairment in centenarians: a retrospective study.

PubMed

Kliegel, M; Zimprich, D; Rott, C

2004-09-01

The purpose of this study was to examine the hypothesis of whether early education and/or maintaining intellectual activities over the life-course have the power to protect against cognitive impairment even in extremely old adults. Ninety centenarians from the population-based Heidelberg Centenarian Study were assessed with a modified version of the Mini Mental State Exam (MMSE). Data about education, occupational status, and life-long intellectual activities in four selected domains were obtained. Results demonstrated that 52% of the sample showed mild-to-severe cognitive impairment. Analyzing the influence of early education, occupational status, and intellectual activities on cognitive status we applied several (logistic) regression analyses. Results revealed independent, significant and strong influence of both formal school education and intellectual activities on the cognitive status in very late life, even after controlling for occupational status. However, about one fourth of the effect of early education on cognitive status was exerted indirectly via the assessed intellectual activities. In summary, the present study provides first evidence for the conclusion that even with regard to cognitive performance in very old age, both early education and life-long intellectual activities seem to be of importance.

Training Program for Practical Engineering Design through the Collaboration with Regional Companies

NASA Astrophysics Data System (ADS)

Gofuku, Akio; Tabata, Nobuhisa; Tomita, Eiji; Funabiki, Nobuo

An education program to bring up engineering design capabilities through long-term internship by the collaboration with regional companies has been put in practice for five years. The program is composed of two types of long-term internships and several lectures for patent systems and engineering ethics. This paper describes the outline of the program, educational effects, and our experiences. The program was improved into two educational programs in 2011. The one is a special course to educate engineers and scientists who can lead the technologies of their domains. The other is a long-term internship program for master students in engineering divisions of graduate school. This paper also describes the current activities of the latter program.

Engineering education as a complex system

NASA Astrophysics Data System (ADS)

Gattie, David K.; Kellam, Nadia N.; Schramski, John R.; Walther, Joachim

2011-12-01

This paper presents a theoretical basis for cultivating engineering education as a complex system that will prepare students to think critically and make decisions with regard to poorly understood, ill-structured issues. Integral to this theoretical basis is a solution space construct developed and presented as a benchmark for evaluating problem-solving orientations that emerge within students' thinking as they progress through an engineering curriculum. It is proposed that the traditional engineering education model, while analytically rigorous, is characterised by properties that, although necessary, are insufficient for preparing students to address complex issues of the twenty-first century. A Synthesis and Design Studio model for engineering education is proposed, which maintains the necessary rigor of analysis within a uniquely complex yet sufficiently structured learning environment.

Urban Education: Its Conceptual and Functional Domains.

ERIC Educational Resources Information Center

Gordon, Edmund G.

Because of the heavy concentration of low ethnic status minorities dwelling in cities, urban education has been equated with the problems of low status persons. However, there are problems that are peculiar to education as it is influenced by urban development that go beyond the problems of special ethnic, low status minority groups. The problems…

Women in Educational Research: Their Status from Student to Employee.

ERIC Educational Resources Information Center

Tittle, Carol Kehr; And Others

The Committee on the Role and Status of Women within the American Educational Research Association (AERA) decided to send a series of questionnaires to universities, school districts, state departments of education, and major research and development organizations in order to analyze the respective roles and statuses of men and women within AERA.…

Nursing Manpower Licensed in Kentucky, 1979-1981. Kentucky Nursing Education Project.

ERIC Educational Resources Information Center

Kentucky State Council on Higher Education, Frankfort.

Data on nurses licensed in Kentucky for 1979-1981 are presented, as part of the Kentucky Nursing Education Project. Information is provided on: licensure status, home state/district/county, employment status, employment state/district/county, field of employment in nursing, position, highest educational level attained, age, sex, marital status,…

Equal Educational Opportunity Scoreboard: The Status of Black Americans in Higher Education, 1970-1979. Fourth ISEP Status Report, Part I.

ERIC Educational Resources Information Center

Morris, Lorenzo; And Others

This fourth report of the Institute for the Study of Educational Policy examines the status of black Americans in higher education from 1970 to 1979, with special consideration to a discussion of a basis of parity which takes into account the rapid growth of the black population and to enrollment patterns in traditionally black institutions of…

NEEDS (The National Engineering Education Delivery System): If We Build It (According to Standards) They Will Come!

ERIC Educational Resources Information Center

Saylor, John M.

The National Science Foundation (NSF) is providing funds for coalitions of engineering educational institutions to improve the quality of undergraduate engineering education. A hypothesis that is being tested is that people can learn better in environments that allow self-paced and/or collaborative learning. The main tools for providing this…

Examination of Assessment Practices for Engineering Design Projects in Secondary Technology Education (Second Article in 3-Part Series)

ERIC Educational Resources Information Center

Kelley, Todd R.; Wicklein, Robert C.

2009-01-01

Based on the efforts to infuse engineering practices within the technology education curriculum it is appropriate to now investigate how technology education teachers are assessing engineering design activities within their classrooms. This descriptive study drew a full sample of high school technology teachers from the current International…

The Use of Physical and Virtual Manipulatives in an Undergraduate Mechanical Engineering (Dynamics) Course

ERIC Educational Resources Information Center

Pan, Edward A.

2013-01-01

Science, technology, engineering, and mathematics (STEM) education is a national focus. Engineering education, as part of STEM education, needs to adapt to meet the needs of the nation in a rapidly changing world. Using computer-based visualization tools and corresponding 3D printed physical objects may help nontraditional students succeed in…

Introducing Engineering in Elementary Education: A 5-Year Study of Teachers and Students

ERIC Educational Resources Information Center

Diefes-Dux, Heidi A.

2015-01-01

Engineering, when integrated into K-12 education, may offer a number of potential student learning and future success benefits. In a 5-year study, four cohorts of elementary teachers of grades 2 to 4 in a single US school district were provided with teacher professional development with engineering education. Teachers were prepared to teach…

Development Education and Engineering: A Framework for Incorporating Reality of Developing Countries into Engineering Studies

ERIC Educational Resources Information Center

Perez-Foguet, A.; Oliete-Josa, S.; Saz-Carranza, A.

2005-01-01

Purpose: To show the key points of a development education program for engineering studies fitted within the framework of the human development paradigm. Design/methodology/approach: The bases of the concept of technology for human development are presented, and the relationship with development education analysed. Special attention is dedicated…

Trends in the Development of Technology and Engineering Education in Emerging Economies

ERIC Educational Resources Information Center

Adegbuyi, P. A. O.; Uhomoibhi, J. O.

2008-01-01

Purpose: The purpose of this paper is to report on the nature of technology and engineering education provision in developing economies, focusing on Nigeria. Design/methodology/approach: The paper draws on recent developments in the shake up and implementation of new measures to call for quality technology and engineering education in the country,…

Learning Objects and Learning Content Management Systems in Engineering Education: Implications of New Trends

ERIC Educational Resources Information Center

Sjoer, Ellen; Dopper, Sofia

2006-01-01

Learning objects and learning content management systems are considered to be "the next wave in engineering education". The results of experiments with these new trends in ICT in engineering education are described in this paper. The prospects were examined and the concepts of reusability of content for teachers and for personalized…

Establishment of Systematical Education Program of Engineering Ethics for a Technical College

NASA Astrophysics Data System (ADS)

Kobayashi, Yukito

Engineering ethics education deals with a wide range of matters. Therefore it should not be treated within a single subject, but in a whole curriculum of a college. In Yatsushiro National College of Technology, we have designed a systematic education program of engineering ethics on the basis of “Yatsushiro National College Synthetic Education Program” , which was established in 2002. This education program, including education for formation of character and morality as well, has two distinctive features : five or seven-year successive course of study and cooperation among the departments and teaching staffs. This interactive scheme has produced highly educational effects.

Evaluation of Current Assessment Methods in Engineering Entrepreneurship Education

ERIC Educational Resources Information Center

Purzer, Senay; Fila, Nicholas; Nataraja, Kavin

2016-01-01

Quality assessment is an essential component of education that allows educators to support student learning and improve educational programs. The purpose of this study is to evaluate the current state of assessment in engineering entrepreneurship education. We identified 52 assessment instruments covered in 29 journal articles and conference…

Railroad Engineering Education Symposium (REES) 2012 and 2014.

DOT National Transportation Integrated Search

2016-01-25

Since its initial offering in 2008, the objective of the Railroad Engineering Education Symposium (REES) has been to develop interest among university faculty in railroad transportation engineering, with the goal of facilitating and supporting their ...

[Health behaviour and changes in health behaviour - are education and social status relevant?].

PubMed

Altenhöner, T; Philippi, M; Böcken, J

2014-01-01

Individual health behaviour counts as an important factor for health status. A healthier lifestyle substantially contributes to better health. People burdened with lower health and with lower socio-economic status could benefit notably. So far it is not known exhaustively to what extent education and social status contribute to changes in health behaviour and which motifs play a decisive role. Based on cross-sectional data from the seventh wave of the "Gesundheitsmonitor", Bertelsmann Foundation, (n=1 436), the influence of social status and education on health behaviour and changes in behaviour was analysed. Specific health behaviour correlates with level of education and socio-economic status. In contrast, regarding health behaviour changes in the last 12 months prior to survey, no social class- or education-specific effect was found. Age, health status as well as fears and wishes in relation to health seem to be important causalities for changes of health-related behaviour. Interventions to foster healthy lifestyles should include class differences in specific health-related behaviour and personal reasons for behavioural changes. © Georg Thieme Verlag KG Stuttgart · New York.

Automobile Engine Control Parameters Study : Volume 2. Status of Foreign Engine Control Practices.

DOT National Transportation Integrated Search

1977-02-01

The report contains the results of a study to evaluate automobile engine control parameters and their effects on vehicle fuel economy and emissions. Volume II treats selected foreign manufacturers. The principal topics reviewed for the twenty-eight e...

Engineering Ethics Education on the Basis of Continuous Education to Improve Communication Ability

NASA Astrophysics Data System (ADS)

Takahara, Kenji; Kajiwara, Toshinori

The paper proposes the engineering ethics education method for students on the basis of continuous education to improve communication ability. First, through a debate, the students acquire the fundamental skills required to marshal their arguments, to construct the rebuttals and to summarize the debates. Secondly, the students study the fundamental techniques to make a presentation on technical subjects related to electrical engineering. Following these classes, in the lecture of engineering ethics, the students probe the cause of each accident and consider the better means for avoiding such an accident, each other. In most cases, the students can express right and commonsensical opinions from an ethical standpoint. However, they can hardly make judgments when the situations such as the human relations in the above accidents are set concretely. During the engineering ethics class, the students come to know that human relations behind the case make the ethical matters more complicated. Furthermore, they come to understand that facilitating daily communications with co-workers and/or bosses is very important in order to avoid the accidents. The recognition of the students is just the results of the continuous education through three years. It can be said that the engineering ethics education thus constructed makes the students raise such spontaneous awareness and their ethical qualities as engineers.

How Engineers Negotiate Domain Boundaries in a Complex, Interdisciplinary Engineering Project

NASA Technical Reports Server (NTRS)

Panther, Grace; Montfort, Devlin; Pirtle, Zachary

2017-01-01

Engineering educators have an essential role in preparing engineers to work in a complex, interdisciplinary workforce. While much engineering education focuses on teaching students to develop disciplinary expertise in specific engineering domains, there is a strong need to teach engineers about the knowledge that they develop or use in their work (Bucciarelli 1994, Allenby Sarewitz, 2011; Frodeman, 2013). The purpose of this research is to gain a better understanding of the knowledge systems of practicing engineers through observations of their practices such that the insights learned can guide future education efforts. Using an example from a complex and interdisciplinary engineering project, this paper presents a case study overviewing the types of epistemological (or knowledge-acquiring or using) complexities that engineers navigate. Specifically, we looked at a discussion of the thermal design of a CubeSat that occurred during an engineering review at NASA. We analyzed the review using a framework that we call 'peak events', or pointed discussions between reviewers, project engineers, and managers. We examined the dialog within peak events to identify the ways that knowledge was brought to bear, highlighting discussions of uncertainty and the boundaries of knowledge claims. We focus on one example discussion surrounding the thermal design of the CubeSat, which provides a particularly thorough example of a knowledge system since the engineers present explained, justified, negotiated, and defended knowledge within a social setting. Engineering students do not get much practice or instruction in explicitly negotiating knowledge systems and epistemic standards in this way. We highlight issues that should matter to engineering educators, such as the need to discuss what level of uncertainty is sufficient and the need to negotiate boundaries of system responsibility. Although this analysis is limited to a single discussion or 'peak event', our case shows that this type of discussion can occur in engineering and suggests that it could be important for future engineering education research.

Paternal education status significantly influences infants' measles vaccination uptake, independent of maternal education status.

PubMed

Rammohan, Anu; Awofeso, Niyi; Fernandez, Renae C

2012-05-08

Despite increased funding of measles vaccination programs by national governments and international aid agencies, structural factors encumber attainment of childhood measles immunisation to levels which may guarantee herd immunity. One of such factors is parental education status. Research on the links between parental education and vaccination has typically focused on the influence of maternal education status. This study aims to demonstrate the independent influence of paternal education status on measles immunisation. Comparable nationally representative survey data were obtained from six countries with the highest numbers of children missing the measles vaccine in 2008. Logistic regression analysis was applied to examine the influence of paternal education on uptake of the first dose of measles vaccination, independent of maternal education, whilst controlling for confounding factors such as respondent's age, urban/rural residence, province/state of residence, religion, wealth and occupation. The results of the analysis show that even if a mother is illiterate, having a father with an education of Secondary (high school) schooling and above is statistically significant and positively correlated with the likelihood of a child being vaccinated for measles, in the six countries analysed. Paternal education of secondary or higher level was significantly and independently correlated with measles immunisation uptake after controlling for all potential confounders. The influence of paternal education status on measles immunisation uptake was investigated and found to be statistically significant in six nations with the biggest gaps in measles immunisation coverage in 2008. This study underscores the imperative of utilising both maternal and paternal education as screening variables to identify children at risk of missing measles vaccination prospectively.

Predicting acceptance and popularity in early adolescence as a function of hearing status, gender, and educational setting.

PubMed

Wolters, Nina; Knoors, Harry E T; Cillessen, Antonius H N; Verhoeven, Ludo

2011-01-01

This study examined associations of communicative skills, social behavior, and personality with acceptance and popularity as a function of hearing status, gender, and educational setting. Participants were 87 deaf and 672 hearing early adolescents of 52 6th grade classrooms in mainstream and special education. Acceptance varied as a function of hearing status by gender; popularity varied as a function of hearing status and educational setting. Deaf boys in mainstream education were less accepted and popular than their hearing classmates and than deaf peers in special education. Deaf girls in mainstream education were also less popular but not less accepted. Communicative skills varied as a function of hearing status, whereas social behavior varied as a function of educational setting. Deaf mainstreamed children showed less developed pragmatic and strategic communicative skills (monitoring, improvisation, initiating/maintaining) than their hearing classmates, but more social adjustment than deaf peers in special education (more prosocial behavior, less antisocial or withdrawn behavior, and more agreeableness). For acceptance, deaf girls in mainstream education compensated the lack of improvisation with higher levels of prosocial behavior, agreeableness, monitoring, and pragmatic skills, and lower levels of antisocial behavior than deaf boys. Monitoring and pragmatic skills negatively affected a deaf mainstream boy's acceptance. In special education, gender differences in prosocial behavior explained deaf boys' lower acceptance. Popularity was explained by pragmatic skills and improvisation as a function of hearing status. Voter population difference and different social behavior norms are considered as an explanation for popularity differences as a function of educational setting. Copyright © 2011 Elsevier Ltd. All rights reserved.

Development of engineering drawing ability for emerging engineering education

NASA Astrophysics Data System (ADS)

Guo, Jian-Wen; Cao, Xiao-Chang; Xie, Li; Jin, Jian-Jun; Wang, Chu-Diao

2017-09-01

Students majoring in engineering is required by the emerging engineering education (3E) in the aspect of their ability of engineering drawing. This paper puts forward training mode of engineering drawing ability for 3E. This mode consists of three kinds of training including training in courses, training in competitions and training in actual demand. We also design the feasible implementation plan and supplies viable references to carry out the mode.

STEM Education: An Incongruous Approach A Proposed Reform Model for a Large Suburban High School

NASA Astrophysics Data System (ADS)

Hughes, Patricia A.

It is unknown how the school can best influence the variables that determine pursuance of science study and career choice to bring about greater opportunity to learn challenging science curriculum for all students and promote Science Technology Engineering and Mathematics (STEM) education. Student decisions regarding the type of science class to elect in early secondary school years can impact their progression and academic success in subsequent rigorous and challenging offerings. Parents, counselors, peers, gender, socio-economic status and individual experience in previous coursework are variables of consideration. The purpose of this study is to examine these variables in a large suburban New Jersey School District aligned to STEM and Advanced Placement level course choice by students. Information regarding the influence of the variables can lead to a reform of the approach toward STEM education currently in place. The study will include a historical reflection of the approach to curriculum revision in the district. Increasing student enrollment in science courses beyond the required number stipulated for high school completion will open opportunities for entrance into STEM related careers or continued post secondary science study.

Reforms in Education: The Need for Re-Engineering Teacher Education for Sustainable Development

ERIC Educational Resources Information Center

Ofoego, O. C.; Ebebe, I. E.

2016-01-01

The paper is concerned with reforms in Education and the need for re-engineering Teacher education in Nigeria for better professionalism and National Development. In the process, key concepts like Teacher Education and professionalism were explained. A brief review of the state of Teacher Education and Development in Nigeria revealed the…

The Associating Abilities of Pre-Service Teachers Science Education Program Acquisitions with Engineering According to STEM Education

ERIC Educational Resources Information Center

Sumen, Ozlem Ozcakir; Calisici, Hamza

2016-01-01

The aim of this study is to determine the associating abilities of elementary education pre-service teachers science education program acquisitions with engineering using STEM education. In the study which is a case study, firstly pre-service teachers were trained about the STEM education approach. Then "Elementary School Science Education…

Parental Socioeconomic Status as a Predictor of Physical and Mental Health Outcomes in Children - Literature Review.

PubMed

Vukojević, Mladenka; Zovko, Ana; Talić, Ivana; Tanović, Merima; Rešić, Biserka; Vrdoljak, Ivana; Splavski, Bruno

2017-12-01

Parental socioeconomic status is a multidimensional concept of special importance for the growth, development, health outcomes and education of children. Its definition generally refers to the amount of parents' income, their employment status and level of education. Hence, lack of economic resources and poverty of parents affect all aspects of the child's life, health outcomes and education, as well as his/her social inclusion. Accordingly, the consequences of a reduced parental socioeconomic status leave long-term effects on their children. Therefore, in order to create interventional programs for children of parents with low income and lower socioeconomic status, as well as with lower level of education, it is important to address the direct aspects of poverty. This review contributes to the evidence indicating that the parental socioeconomic status is highly influential in determining the child's physical and mental health and future outcomes including his/her academic achievements and education, as well as the parameters of his/her physical abilities, cognitive function and fundamental neurobiology affecting brain development.

Ethics education in the consulting engineering environment: where do we start?

PubMed

Elder, Keith E

2004-04-01

As a result of in-house discussions stimulated by previous Gonzaga engineering ethics conferences, Coffman Engineers began the implementation of what is to be a company-wide ethics training program. While preparing a curriculum aimed at consulting engineers, we found very little guidance as to how to proceed with most available literature being oriented towards the academic environment. We consulted a number of resources that address the teaching of engineering ethics in higher education, but questioned their applicability for the Consulting Engineering environment. This lack of guidance led us to informal research into the ethical knowledge and attitudes of both consulting engineers and engineering students. Some of our findings were unexpected, and suggest that a simpler approach to teaching ethics to working professionals might be preferred to that typically promoted in higher education.

Practice and Educational Effect of a Project Based Learning Program Collaborated with Local Enterprises

NASA Astrophysics Data System (ADS)

Nagashima, Masaaki; Kondo, Yasuo; Tanaka, Hisataka; Miyachika, Kouitsu; Akiyama, Masahiko; Ishibuchi, Nobutaka; Hayakawa, Motozo

The ICEE (Innovation Center for Engineering Education) was founded in April 2004 as an educational facility in the Faculty of Engineering of Tottori University. The ICEE plans the development and training of creative professionals in all fields of engineering through Project Based Learning (PBL) programs in collaboration with local enterprises. In this report, the outline and the educational effect of the education program are described. Through PBL programs, we can give problem finding and solving abilities, self-initiative and communicative skill to the students.

Engineering Institute

Science.gov Websites

Search Site submit National Security Education Center Los Alamos National LaboratoryEngineering Institute Addressing national needs by fostering specialized recruiting and strategic partnerships Los Alamos National LaboratoryEngineering Institute Menu NSEC Educational Programs Los Alamos Dynamics Summer

Current developments in the French engineering education system

NASA Astrophysics Data System (ADS)

Lemaître, Denis

2017-03-01

The French engineering education system has been established in quite a different way from others in Europe, such as the German and British systems, for instance. Due to both the whole state system and the private initiatives during the industrial revolution, the engineering education system today is composed of a large number (nearly 200) of rather small and specialised institutions, which have historically mostly developed outside universities. In the last decades, this system has had to face a powerful internationalisation movement. This has had major consequences on the curricula design, regarding foreign language teaching, international exchanges, and links with research. Currently, the French engineering education system is facing new challenges, regarding innovation and environmental and social issues, in a very competitive higher education context.

Conceptual and Procedural Approaches to Mathematics in the Engineering Curriculum--Comparing Views of Junior and Senior Engineering Students in Two Countries

ERIC Educational Resources Information Center

Bergsten, Christer; Engelbrecht, Johann; Kågesten, Owe

2017-01-01

One challenge for an optimal design of the mathematical components in engineering education curricula is to understand how the procedural and conceptual dimensions of mathematical work can be matched with different demands and contexts from the education and practice of engineers. The focus in this paper is on how engineering students respond to…

The Use of a Game-Based Project in Engineering Education: An Examination of the Academic Learning, Engagement and Motivation of First-Year Engineering Students

ERIC Educational Resources Information Center

Fang, Jun

2012-01-01

Two critical issues are of great concern in engineering education today: the increasingly broad requirements for 21st-century engineers and the lack of effective instructional approaches needed to produce students who meet the requirements. However, pedagogical approaches in engineering have remained relatively unchanged for the last 40 years and…

Lifting the Status of Learning Support Teachers

ERIC Educational Resources Information Center

Kusuma-Powell, Ochan; Powell, William

2016-01-01

Status, the perception of one's standing in relation to others in a group, negatively influence learning. Status issue have implications for educating students with special learning needs: Both these students and the learning support or special education teachers who serve them often hold low status in a school community. Like adults, children…

Military Curriculum Materials for Vocational and Technical Education. Engine Principles, 8-3. Edition 5.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This individualized, self-paced course for independent study in engine principles has been adapted from military curriculum materials for vocational education use. The course provides the student with basic information on engine principles including different kinds of combustion engines, lubrication systems, and cooling systems. It is organized…

Using Engineering Cases in Technology Education

ERIC Educational Resources Information Center

Kelley, Todd R.

2009-01-01

There has been a great deal of discussion in the past few years about implementing engineering design in K-12 classrooms. Experts from K-12 education, universities, industry, and government officials attended the ASEE leadership workshop on K-12 Engineering Outreach in June of 2004 and came to a consensus on the need to implement engineering in…

Studying Science and Engineering Learning in Practice

ERIC Educational Resources Information Center

Penuel, William R.

2016-01-01

A key goal of science and engineering education is to provide opportunities for people to access, interpret, and make use of science and engineering to address practical human needs. Most education research, however, focuses on how best to prepare students in schools to participate in forms of science and engineering practices that resemble those…

Deconstructing Engineering Education Programmes: The DEEP Project to Reform the Mechanical Engineering Curriculum

ERIC Educational Resources Information Center

Busch-Vishniac, Ilene; Kibler, Tom; Campbell, Patricia B.; Patterson, Eann; Guillaume, Darrell; Jarosz, Jeffrey; Chassapis, Constantin; Emery, Ashley; Ellis, Glenn; Whitworth, Horace; Metz, Susan; Brainard, Suzanne; Ray, Pradosh

2011-01-01

The goal of the Deconstructing Engineering Education Programmes project is to revise the mechanical engineering undergraduate curriculum to make the discipline more able to attract and retain a diverse community of students. The project seeks to reduce and reorder the prerequisite structure linking courses to offer greater flexibility for…

Improving the Practical Education of Chemical and Pharmaceutical Engineering Majors in Chinese Universities

ERIC Educational Resources Information Center

Zhao, Feng-qing; Yu, Yi-feng; Ren, Shao-feng; Liu, Shao-jie; Rong, Xin-yu

2014-01-01

Practical education in chemical engineering has drawn increasing attention in recent years. This paper discusses two approaches to teaching and learning about experiments among upper-level chemical and pharmaceutical engineering majors in China. On the basis of years of experience in teaching chemical and pharmaceutical engineering, we propose the…

Attracting Prospective Engineering Students in the Emerging European Space for Higher Education

ERIC Educational Resources Information Center

Lopez-Martin, Antonio J.

2010-01-01

A set of outreach activities implemented by the College of Engineering of the Public University of Navarra, Spain, is described. They represent different initiatives aimed to improve recruitment of young engineers in the difficult context of declining interest in engineering and the educational changes Europe is facing nowadays. The initiatives…

Of Feedback, Noise, and Clarion Calls: Preserving the Quality of Engineering Education.

ERIC Educational Resources Information Center

David, Edward E., Jr.

Although times seemed ripe for far-reaching initiatives to safeguard the quality of engineering education, current political noise about the issue threatens to drown out the engineering community's message. However, the engineering community's theme should be that economic growth in a modern economy, that industrial policy, is based first and…

A Survey of Cooperative Engineering Education. Bulletin, 1949, No. 15

ERIC Educational Resources Information Center

Armsby, Henry H.

1949-01-01

Engineers are increasingly being called to occupy positions of leadership in which they need knowledge of society and of social processes sometimes to a greater degree than they need engineering skill. Many educators are deeply concerned over the question of how engineering students may acquire this knowledge in addition to the technical knowledge…

"What about Women?" Historical Perspectives on the CSWE Council on the Role and Status of Women in Social Work Education (Women's Council)

ERIC Educational Resources Information Center

Alvarez, Ann Rosegrant; Collins, Kathryn S.; Graber, Helen V.; Lazzari, Marceline M.

2008-01-01

The Council on the Role and Status of Women in Social Work Education (WC), a volunteer committee of the Council on Social Work Education (CSWE), has a 37-year history. This article presents an overview of the WC from the late 1960s to September 2006 and acknowledges the needs, status, and contributions of women in social work education. Drawing on…

Engineering education in the wake of hurricane Katrina

PubMed Central

Lima, Marybeth

2007-01-01

Living through hurricane Katrina and its aftermath and reflecting on these experiences from technical and non-technical standpoints has led me to reconsider my thoughts and philosophy on engineering education. I present three ideas regarding engineering education pedagogy that I believe will prepare future engineers for problem-solving in an increasingly complex world. They are (1) we must practice radical (to the root) engineering, (2) we must illustrate connections between engineering and public policy, and (3) we will join the charge to find sustainable solutions to problems. Ideas for bringing each of these concepts into engineering curricula through methods such as case study, practicing broad information gathering and data interpretation, and other methods inside and outside the classroom, are discussed. I believe that the consequences of not considering the root issues of problems to be solved, and of not including policy and sustainability considerations when problems to be solved are framed will lead our profession toward well meaning but insufficient utility. Hurricane Katrina convinced me that we must do better as educators to prepare our students for engineering for a sustainable world. PMID:18271988

76 FR 63278 - Bayer CropScience LP; Determination of Nonregulated Status for Cotton Genetically Engineered for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-12

... for Cotton Genetically Engineered for Insect Resistance and Herbicide Tolerance AGENCY: Animal and... determination that a genetically engineered cotton developed by Bayer CropScience LP, designated as TwinLink TM cotton (events T304-40 and GHB119), which has been genetically engineered to be tolerant to the herbicide...

Status Attainments of Couples: The Reciprocal Effects of Postmarital Education and Occupation.

ERIC Educational Resources Information Center

Sharda, Bam Dev; Nangle, Barry N.

Data from a sample of 32-year old men and their working wives from Lenawee County, Michigan, were examined to study the effect of postmarital education on the individual and collective statuses of married couples. Current socioeconomic status of each of the spouses was predicted to be a function of family background, educational and occupational…

14 CFR 135.439 - Maintenance recording requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., propeller, and rotor. (ii) The current status of life-limited parts of each airframe, engine, propeller... alterations and repairs to each airframe, engine, propeller, rotor, and appliance. (b) Each certificate holder... the records of the last complete overhaul of each airframe, engine, propeller, rotor, and appliance...

14 CFR 135.439 - Maintenance recording requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., propeller, and rotor. (ii) The current status of life-limited parts of each airframe, engine, propeller... alterations and repairs to each airframe, engine, propeller, rotor, and appliance. (b) Each certificate holder... the records of the last complete overhaul of each airframe, engine, propeller, rotor, and appliance...

14 CFR 135.439 - Maintenance recording requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., propeller, and rotor. (ii) The current status of life-limited parts of each airframe, engine, propeller... alterations and repairs to each airframe, engine, propeller, rotor, and appliance. (b) Each certificate holder... the records of the last complete overhaul of each airframe, engine, propeller, rotor, and appliance...

14 CFR 135.439 - Maintenance recording requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., propeller, and rotor. (ii) The current status of life-limited parts of each airframe, engine, propeller... alterations and repairs to each airframe, engine, propeller, rotor, and appliance. (b) Each certificate holder... the records of the last complete overhaul of each airframe, engine, propeller, rotor, and appliance...

14 CFR 135.439 - Maintenance recording requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., propeller, and rotor. (ii) The current status of life-limited parts of each airframe, engine, propeller... alterations and repairs to each airframe, engine, propeller, rotor, and appliance. (b) Each certificate holder... the records of the last complete overhaul of each airframe, engine, propeller, rotor, and appliance...

75 FR 6256 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-08

... whereby the engineer and RCO qualification endorsement is placed into the employee's crew management... notifies the Crew Management Center and has the employee's engineer or RCO status changed from active to... CFR part 240, Qualification and Certification of Locomotive Engineers, specifically Section 129. CSXT...

How Authors Did It--A Methodological Analysis of Recent Engineering Education Research Papers in the European Journal of Engineering Education

ERIC Educational Resources Information Center

Malmi, Lauri; Adawi, Tom; Curmi, Ronald; de Graaff, Erik; Duffy, Gavin; Kautz, Christian; Kinnunen, Päivi; Williams, Bill

2018-01-01

We investigated research processes applied in recent publications in the "European Journal of Engineering Education" (EJEE), exploring how papers link to theoretical work and how research processes have been designed and reported. We analysed all 155 papers published in EJEE in 2009, 2010 and 2013, classifying the papers using a taxonomy…

Constructively Aligned Teaching and Learning in Higher Education in Engineering: What Do Students Perceive as Contributing to the Learning of Interdisciplinary Thinking?

ERIC Educational Resources Information Center

Spelt, E. J. H.; Luning, P. A.; van Boekel, M. A. J. S.; Mulder, M.

2015-01-01

Increased attention to the need for constructively aligned teaching and learning in interdisciplinary higher education in engineering is observed. By contrast, little research has been conducted on the implementation of the outcome-based pedagogical approach to interdisciplinary higher education in engineering. Therefore, the present design-based…

The Effects of the Changes in Postmodern Pedagogical Paradigms on Engineering Education in Turkey

ERIC Educational Resources Information Center

Sevindik, Tuncay; Akpinar, Burhan

2007-01-01

The aim of this research is to determine to what extent the postmodern pedagogic changes have reflected engineering education in Turkey. A total of 781 students were taken as a poll for this purpose. The findings showed that engineering education in Turkey is affected by the positivist philosophy and behaviourist approach. At these schools…

Training Social Competence in Engineering Education: Necessary, Possible or Not Even Desirable? An Explorative Study from a Surveying Education Programme

ERIC Educational Resources Information Center

Emilsson, U. Melin; Lilje, B.

2008-01-01

The aim of this paper is to discuss whether "social competence" is necessary for engineers to contribute to sustainable development and if it is, how to teach communication, group-processes and leadership in technical environments like engineering education programmes. The article reflects on a pedagogical project carried out in the…

The Significance of Context for Curriculum Development in Engineering Education: A Case Study across Three African Countries

ERIC Educational Resources Information Center

Case, Jennifer M.; Fraser, Duncan M.; Kumar, Anil; Itika, Ambrose

2016-01-01

Curriculum reform is a key topic in the engineering education literature, but much of this discussion proceeds with little engagement with the impact of the local context in which the programme resides. This article thus seeks to understand the influence of local contextual dynamics on curriculum reform in engineering education. The empirical…

Effects of Globalisation on Higher Engineering Education in Germany--Current and Future Demands

ERIC Educational Resources Information Center

Morace, Christophe; May, Dominik; Terkowsky, Claudius; Reynet, Olivier

2017-01-01

Germany is well known around the world for the strength of its economy, its industry and for the "German model" for higher engineering education based on developing technological skills at a very high level. In this article, we firstly describe the former and present model of engineering education in Germany in a context of the…

Native American Participation among Bachelors in Physical Sciences and Engineering: Results from 2003-13 Data of the National Center for Education Statistics. Focus On

ERIC Educational Resources Information Center

Merner, Laura; Tyler, John

2017-01-01

Using the National Center of Education Statistics' Integrated Postsecondary Education Data System (IPEDS), this report analyzes data on Native American recipients of bachelor's degrees among 16 physical science and engineering fields. Overall, Native Americans are earning physical science and engineering bachelor's degrees at lower rates than the…

Challenges and Promises of Overcoming Epistemological and Methodological Partiality: Advancing Engineering Education through Acceptance of Diverse Ways of Knowing

ERIC Educational Resources Information Center

Douglas, Elliot P.; Koro-Ljungberg, Mirka; Borrego, Maura

2010-01-01

The purpose of this paper is to explore some challenges and promises when the epistemological diversity embedded in qualitative research traditions is introduced to research communities with one dominant research paradigm, such as engineering education. Literature is used from other fields and empirical data are used from engineering education,…

34 CFR 691.8 - Enrollment status for students taking regular and correspondence courses.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 4 2011-07-01 2011-07-01 false Enrollment status for students taking regular and correspondence courses. 691.8 Section 691.8 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION (CONTINUED) ACADEMIC COMPETITIVENESS...

34 CFR 691.8 - Enrollment status for students taking regular and correspondence courses.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 4 2014-07-01 2014-07-01 false Enrollment status for students taking regular and correspondence courses. 691.8 Section 691.8 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION (CONTINUED) ACADEMIC COMPETITIVENESS...

34 CFR 691.8 - Enrollment status for students taking regular and correspondence courses.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 4 2012-07-01 2012-07-01 false Enrollment status for students taking regular and correspondence courses. 691.8 Section 691.8 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION (CONTINUED) ACADEMIC COMPETITIVENESS...