25 CFR 39.201 - Does ISEF reflect the actual cost of school operations?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 1 2011-04-01 2011-04-01 false Does ISEF reflect the actual cost of school operations? 39.201 Section 39.201 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION THE... relative distribution of available funds at the local school level by comparison with all other Bureau...

JAXA PAO VIP Event 3318_624493_hires

NASA Image and Video Library

2018-03-05

SPACE STATION CREW DISCUSSES LIFE IN SPACE WITH JAPANESE OFFICIALS --------------------------------------------------------- Aboard the International Space Station, Expedition 55 Commander Anton Shkaplerov of Roscosmos and Flight Engineers Scott Tingle of NASA and Norishige Kanai of the Japan Aerospace Exploration Agency (JAXA) discussed life and research on the orbital laboratory during an in-flight question and answer session March 3 with Japanese space officials and policy ministers attending the International Space Explorers Forum (ISEF-2) in Tokyo. The trio is in the midst of a five-and-a-half-month mission on the station.

Nevada's Climate Change High School Science Fair Network

NASA Astrophysics Data System (ADS)

Buck, P.

2012-12-01

The purpose of this 3 year project funded by NSF (GEO 1035049) is to increase the climate change science content knowledge and teaching effectiveness of in-service high school science teachers and increase the numbers of quality of high school geoscience projects competing in Nevada's three regional Intel ISEF (International Science & Engineering Fair) affiliated science fairs. In year 1 of the project participants consisted of six female and three male high school teachers from across Nevada. Eight of the participants were white and one was Asian. Five participants taught in Clark County, two taught in Owyhee, one taught in Elko and one taught in Spring Creek. Over 20% of the projects were noted (by the teachers) as being submitted by underrepresented students; however, this information is not reliable as most students did not provide this data themselves. Pre-and post- content tests were given. Teachers improved from an average of eight missed on the pre-test to an average of only four items missed on the post-test. Participants were also asked to evaluate their own teaching efficacy. In general, participants had a strong science efficacy. The item on which there was the most discrepancy among participants was on #10, the one stating that "The low achievement of some students cannot generally be blamed on their teachers." Most teachers completed an end of year program evaluation. All but one of the participants felt that the pace of the workshop was comfortable. All participants who used faculty mentors in helping their students rated their faculty mentors very highly. All participants rated the program content very highly in terms of clarity, organization, relevance, helpfulness and usefulness. All participants gave the program a very high rating overall and stated they would likely use the information to mentor future students and in instruction in future classes. The science fairs are the culmination of the program. Teachers were required to have at least one student submit a project related to climate change science in their regional fair. There were 28 projects submitted in 2011; of these there were 10 first place winners, 5 second place winners, and 1 third place winner. Over half of the projects entered in the regional science fairs received an award. The reported student science fair projects relating to climate change include, among others: comparing CO2 emissions in old and new cars, comparing travel by mass transit with travel by private car, studying how CO2 effects global warming, studying seedlings in a climate controlled environment, studying the effect of climate change on hurricanes, determining ammonia emission from bovine manure, and studying the effect of Dendroctonus brevicomis on the depopulation of Pinus edulis and Pinus ponderosa due to climate change.

Peculiarities of organization of project and research activity of students in computer science, physics and technology

NASA Astrophysics Data System (ADS)

Stolyarov, I. V.

2017-01-01

The author of this article manages a project and research activity of students in the areas of computer science, physics, engineering and biology, basing on the acquired experience in these fields. Pupils constantly become winners of competitions and conferences of different levels, for example, three of the finalists of Intel ISEF in 2013 in Phoenix (Arizona, USA) and in 2014 in Los Angeles (California, USA). In 2013 A. Makarychev received the "Small Nobel prize" in Computer Science section and special award sponsors - the company's CAST. Scientific themes and methods suggested by the author and developed in joint publications of students from Russia, Germany and Austria are the patents for invention and certificates for registration in the ROSPATENT. The article presents the results of the implementation of specific software and hardware systems in physics, engineering and medicine.

Electromagnetic Waves with Frequencies Near the Local Proton Gryofrequency: ISEF-3 1 AU Observations

NASA Technical Reports Server (NTRS)

Tsurutani, B.

1993-01-01

Low Frequency electromagnetic waves with periods near the local proton gyrofrequency have been detected near 1 AU by the magnetometer onboard ISEE-3. For these 1 AU waves two physical processes are possible: solar wind pickup of nuetral (interstellar?) particles and generation by relativistic electron beams propagating from the Sun.

Abstracts of the Finalists of the International Science and Engineering Fair (35th, Columbus, Ohio, May 8-13, 1984).

ERIC Educational Resources Information Center

Science Service, Inc., Washington, DC.

A science and engineering fair is a competition based on the quality of projects done by students, the results of which are reported through exhibits and oral presentations at the fair. Fairs operate on a step basis. Students who win in small fairs such as a local fair, move to a city fair, then to a regional fair, and may be chosen to represent…

Abstracts of the Finalists of the International Science and Engineering Fair (37th, Ft. Worth, Texas, May 11-17, 1986).

ERIC Educational Resources Information Center

Science Service, Inc., Washington, DC.

A science and engineering fair is a competition based on the quality of projects done by students, the results of which are reported through exhibits and oral presentations at the fair. Fairs operate on a step basis. Students who win in small, local fairs, move to a city fair, then to a regional fair, and may be chosen to represent that fair in…

Abstracts of the Finalists of the International Science and Engineering Fair (39th, Knoxville, Tennessee, May 8-14, 1988).

ERIC Educational Resources Information Center

Science Service, Inc., Washington, DC.

A science and engineering fair is a competition based on the quality of projects done by students, the results of which are reported through exhibits and oral presentations at the fair. Fairs operate on a step basis. Students who win in small, local fairs, move to a city fair, then to a regional fair, and may be chosen to represent that fair in…

Abstracts of the Finalists of the International Science and Engineering Fair (34th, Albuquerque, New Mexico, May 9-14, 1983).

ERIC Educational Resources Information Center

Science Service, Inc., Washington, DC.

A science and engineering fair is a competition based on the quality of projects done by students, the results of which are reported through exhibits and oral presentations at the fair. Fairs operate on a step basis. Students who win in small fairs such as a local fair, move to a city fair, then to a regional fair, and may be chosen to represent…

Abstracts of the Finalists of the International Science and Engineering Fair (38th, San Juan, Puerto Rico, May 10-16, 1987).

ERIC Educational Resources Information Center

Science Service, Inc., Washington, DC.

A science and engineering fair is a competition based on the quality of projects done by students, the results of which are reported through exhibits and oral presentations at the fair. Fairs operate on a step basis. Students who win in small, local fairs, move to a city fair, then to a regional fair, and may be chosen to represent that fair in…

Abstracts of the Finalists of the International Science and Engineering Fair (36th, Shreverport/Bossier City, Louisiana, May 12-18, 1985).

ERIC Educational Resources Information Center

Science Service, Inc., Washington, DC.

A science and engineering fair is a competition based on the quality of projects done by students, the results of which are reported through exhibits and oral presentations at the fair. Fairs operate on a step basis. Students who win in small fairs such as a local fair, move to a city fair, then to a regional fair, and may be chosen to represent…

77 FR 70357 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-26

... replacing the drain tube assemblies and support clamps on the aft fairing of the engine struts. This new AD requires replacing the drain tube assembly of the left and right engine strut aft fairings with a new one... require replacing the drain tube assembly of the left and right engine strut aft fairings with a new one...

International Rules for Precollege Science Research: Guidelines for Science and Engineering Fairs, 2007-2008

ERIC Educational Resources Information Center

Science Service, 2007

2007-01-01

This publication presents changes and modifications for 2007-2008 to the "International Rules for Precollege Science Research: Guidelines for Science and Engineering Fairs." It is written to guide fair directors, teachers, scientists, parents, and adult volunteers as they pursue their work of encouraging students to explore and investigate their…

International Rules for Precollege Science Research: Guidelines for Science and Engineering Fairs, 2006-2007

ERIC Educational Resources Information Center

Science Service, 2006

2006-01-01

This publication presents changes and modifications for 2006-2007 to the "International Rules for Precollege Science Research: Guidelines for Science and Engineering Fairs." It is written to guide fair directors, teachers, scientists, parents, and adult volunteers as they pursue their work of encouraging students to explore and investigate their…

77 FR 34879 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-12

... left and right engine strut aft fairings with a new one which includes an integral support clamp made... fairing of the left engine strut at the clamp support location under the aft fairing compartment, inside... Floor, Room W12-140, 1200 New Jersey Avenue SE., Washington, DC 20590. Hand Delivery: Deliver to Mail...

Dynamic Sequence Assignment.

DTIC Science & Technology

1983-12-01

ISEF;,, YE 5) SET NXT ENTRYIN PLANTO EF RESE LATH DEFENSETOhION ET REET E CNTRON L TO E. FIND EST PS TO THIS DEFENSE ’DEF’UPDATE PS OF THIS LOCATION... cNc 8p & iin Ik - -4 C- coj C4 GoC "p c C4 tnS ’Io V4~ en *1-4C .44 0800 * .. ; J knccC C4>4- 1Sc C4 C4A xll 00 % .... ***~***M******B13 6 . -0 4 )V

Students Inspiring Students: An Online Tool for Science Fair Participants

ERIC Educational Resources Information Center

Seeman, Jeffrey I.; Lawrence, Tom

2011-01-01

One goal of 21st-century education is to develop mature citizens who can identify issues, solve problems, and communicate solutions. What better way for students to learn these skills than by participating in a science and engineering fair? Fair participants face the same challenges as professional scientists and engineers, even Nobel laureates.…

White House Science Fair

NASA Image and Video Library

2014-05-27

Bobak Ferdowsi, a system's engineer at NASA's Jet Propulsion Laboratory, speaks with a member of "invenTeam" at the White House Science Fair. Olivia Van Amsterdam, 16, Katelyn Sweeney, 17, and their team of student engineers from Natick, MA, invented a 120 lb remotely operated vehicle (ROV) that can help search-and-rescue dive teams search for bodies in dangerous, icy waters. The fourth White House Science Fair was held at the White House and included 100 students from more than 30 different states who competed in science, technology, engineering, and math (STEM) competitions. (Photo Credit: NASA/Aubrey Gemignani)

The Big Bang: UK Young Scientists' and Engineers' Fair 2010

ERIC Educational Resources Information Center

Allison, Simon

2010-01-01

The Big Bang: UK Young Scientists' and Engineers' Fair is an annual three-day event designed to promote science, technology, engineering and maths (STEM) careers to young people aged 7-19 through experiential learning. It is supported by stakeholders from business and industry, government and the community, and brings together people from various…

White House Science Fair

NASA Image and Video Library

2014-05-27

Bobak Ferdowsi, a system's engineer at NASA's Jet Propulsion Laboratory who became widely known for his mohawk hairstyle during the broadcast of the Curiosity landing on Mars, is seen here discussing a project with a participant in the White House Science Fair. The fourth White House Science Fair was held at the White House and included 100 students from more than 30 different states who competed in science, technology, engineering, and math (STEM) competitions. (Photo Credit: NASA/Aubrey Gemignani)

Power turbine ventilation system

NASA Technical Reports Server (NTRS)

Wakeman, Thomas G. (Inventor); Brown, Richard W. (Inventor)

1991-01-01

Air control mechanism within a power turbine section of a gas turbine engine. The power turbine section includes a rotor and at least one variable pitch propulsor blade. The propulsor blade is coupled to and extends radially outwardly of the rotor. A first annular fairing is rotatable with the propulsor blade and interposed between the propulsor blade and the rotor. A second fairing is located longitudinally adjacent to the first fairing. The first fairing and the second fairing are differentially rotatable. The air control mechanism includes a platform fixedly coupled to a radially inner end of the propulsor blade. The platform is generally positioned in a first opening and a first fairing. The platform and the first fairing define an outer space. In a first position corresponding with a first propulsor blade pitch, the platform is substantially conformal with the first fairing. In a second position corresponding with the second propulsor blade pitch, an edge portion of the platform is displaced radially outwardly from the first fairing. When the blades are in the second position and rotating about the engine axis, the displacement of the edge portion with respect to the first fairing allows air to flow from the outer space to the annular cavity.

Physics at the International Science and Engineering Fair.

ERIC Educational Resources Information Center

Walker, Jearl

1979-01-01

A judge for the physics projects for the 1979 International Science and Engineering Fair describes many of the more popular science projects. Projects described include the following: carbon dioxide and helium-neon lasers, reverse flame investigations, holography, construction of a magnetic bottle to confine plasma, and aerodynamic drag. (BT)

University of Maryland MRSEC - Education: Resources

Science.gov Websites

. University of Maryland Materials Research Science and Engineering Center Home About Us Leadership Moments in MSE The Materials Science and Engineering Career Resources Center Materials Research Society Central Super Science Fair Projects: Ideas, Topics, & Experiments All Science Fair Projects Science

U.S. Air Force Spent Billions on F117 Engine Sustainment Without Knowing What a Fair Price Was

DTIC Science & Technology

2016-03-11

repair, or overhaul, as compared to the PW2000 commercial-derivative engine sustainment price for these services in the private sector.17 The House ... sustainment costs. The House committee was also concerned that the Air Force could not determine whether it is paying a fair and reasonable price for...administration. The House committee encouraged the Air Force to seek a competitive strategy to obtain F117 engine sustainment services and also encouraged it to

International Rules for Pre-College Science Research: Guidelines for Science and Engineering Fairs, 2010-2011

ERIC Educational Resources Information Center

Society for Science & the Public, 2011

2011-01-01

This paper presents the rules and guidelines of the Intel International Science and Engineering Fair 2011 to be held in Los Angeles, California in May 8-13, 2011. In addition to providing the rules of competition, these rules and guidelines for conducting research were developed to facilitate the following: (1) protect the rights and welfare of…

Students' Sources of Motivation for Participating in Science Fairs: An Exploratory Study within the Canada-Wide Science Fair 2008

ERIC Educational Resources Information Center

Dionne, Liliane; Reis, Giuliano; Trudel, Louis; Guillet, Gabriel; Kleine, Leonard; Hancianu, Corina

2012-01-01

Science fairs have been for many years a popular school activity in North America. They are a venue for the popularization of science and consequently an important encouragement for the pursuit of careers in science or engineering. However, little is known about students' perceived motives for participating in local or national science fairs and…

White House Science Fair

NASA Image and Video Library

2013-04-22

U.S. President Barack Obama speaks as he hosts the third-ever White House Science Fair in the East Room at the White House in Washington, April 22, 2013. The science fair celebrated student winners of a broad range of science, technology, engineering and math (STEM) competitions from across the country. Photo Credit: (NASA/Bill Ingalls)

Development of a Kevlar/PMR-15 reduced drag DC-9 nacelle fairing

NASA Technical Reports Server (NTRS)

Kawai, R. T.; Hrach, F. J.

1980-01-01

The paper describes an advanced composite fairing designed to reduce drag on DC-9 nacelles as a part of the NASA Engine Component Improvement Program. This fairing is the aft enclosure for the thrust reverser actuator system on JT8D engine nacelles and is subjected to a 500 F exhaust flow during the reverse thrust. A reduced-drag configuration was developed by using in-flight tuft surveys for flow visualization in order to identify areas with low-quality flow, and then modifying the aerodynamic lines to improve the flow. A fabrication method for molding the part in an autoclave was developed; this material system is suitable for 500 F. The resultant composite fairing reduces the overall aircraft drag 1% with a weight reduction of 40% when compared with a metal component.

Gender Differences in Science Interests: An Analysis of Science Fair Projects.

ERIC Educational Resources Information Center

Lawton, Carol A.; Bordens, Kenneth S.

Gender differences in science interests were examined in two studies of projects entered in a regional science fair in kindergarten through grade 12. A content analysis of 1,319 project topics and materials submitted to the Northeastern Indiana Regional Science and Engineering Fair from 1991 through 1993 showed that girls were more likely than…

White House Science Fair

NASA Image and Video Library

2014-05-27

President Barack Obama spoke at the White House Science Fair Tuesday, May 27, 2014 at the White House. NASA Administrator Charles Bolden attended and was recognized by the President at the fourth White House Science Fair, which included 100 students from more than 30 different states who competed in science, technology, engineering, and math (STEM) competitions. (Photo Credit: NASA/Aubrey Gemignani)

White House Science Fair

NASA Image and Video Library

2013-04-22

U.S. President Obama recognizes NASA Administrator Charles Bolden during his remarks at the 3rd Annual White House Science Fair in the East Room of the White House on Monday, April 22, 2013. The science fair celebrated student winners of a broad range of science, technology, engineering and math (STEM) competitions from across the country. Photo Credit: (NASA/Bill Ingalls)

Science Fairs: A Qualitative Study of Their Impact on Student Science Inquiry Learning and Attitudes toward STEM

ERIC Educational Resources Information Center

Schmidt, Kathleen M.; Kelter, Paul

2017-01-01

Little is known about the impact of science fair participation on student science inquiry learning. Furthermore, there is only a small research base relating to science fair participation and student attitudes toward science, technology, engineering, and mathematics (STEM) careers and coursework. In this study, 41 seventh-grade science fair…

Science Fair

NASA Image and Video Library

2014-05-27

NASA Administrator Charles Bolden (left) and Bill Nye, The Science Guy, speak with some students that participated in the White House Science Fair. The fourth White House Science Fair was held at the White House on May 27, 2014 and included 100 students from more than 30 different states who competed in science, technology, engineering, and math (STEM) competitions. (Photo Credit: NASA/Aubrey Gemignani)

Responsibility ascriptions in technology development and engineering: three perspectives.

PubMed

Doorn, Neelke

2012-03-01

In the last decades increasing attention is paid to the topic of responsibility in technology development and engineering. The discussion of this topic is often guided by questions related to liability and blameworthiness. Recent discussions in engineering ethics call for a reconsideration of the traditional quest for responsibility. Rather than on alleged wrongdoing and blaming, the focus should shift to more socially responsible engineering, some authors argue. The present paper aims at exploring the different approaches to responsibility in order to see which one is most appropriate to apply to engineering and technology development. Using the example of the development of a new sewage water treatment technology, the paper shows how different approaches for ascribing responsibilities have different implications for engineering practice in general, and R&D or technological design in particular. It was found that there was a tension between the demands that follow from these different approaches, most notably between efficacy and fairness. Although the consequentialist approach with its efficacy criterion turned out to be most powerful, it was also shown that the fairness of responsibility ascriptions should somehow be taken into account. It is proposed to look for alternative, more procedural ways to approach the fairness of responsibility ascriptions. © The Author(s) 2009. This article is published with open access at Springerlink.com

The 1939-1940 New York World's Fair and the Transformation of the American Science Extracurriculum

ERIC Educational Resources Information Center

Terzian, Sevan G.

2009-01-01

At the 1939-1940 New York World's Fair, several thousand boys and girls, all members of a growing national network of high school science and engineering clubs, displayed their science fair projects and conducted live experiments to more than 10 million visitors. Housed in the building sponsored by the Westinghouse Electric and Manufacturing…

White House Science Fair

NASA Image and Video Library

2013-04-22

Planetary Society Executive Director and “Bill Nye the Science Guy” host Bill Nye, right, photographs himself with NASA Mars Curiosity Landing mission controller, Bobak "Mohawk Guy" Ferdowsi, during the White House Science Fair held at the White House, April 22, 2013. The science fair celebrated student winners of a broad range of science, technology, engineering and math (STEM) competitions from across the country. Photo Credit: (NASA/Bill Ingalls)

49 CFR 830.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., search and rescue, law enforcement, aeronautical research, or biological or geological resource..., and which would normally require major repair or replacement of the affected component. Engine failure or damage limited to an engine if only one engine fails or is damaged, bent fairings or cowling...

49 CFR 830.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., search and rescue, law enforcement, aeronautical research, or biological or geological resource..., and which would normally require major repair or replacement of the affected component. Engine failure or damage limited to an engine if only one engine fails or is damaged, bent fairings or cowling...

49 CFR 830.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., search and rescue, law enforcement, aeronautical research, or biological or geological resource..., and which would normally require major repair or replacement of the affected component. Engine failure or damage limited to an engine if only one engine fails or is damaged, bent fairings or cowling...

49 CFR 830.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., search and rescue, law enforcement, aeronautical research, or biological or geological resource..., and which would normally require major repair or replacement of the affected component. Engine failure or damage limited to an engine if only one engine fails or is damaged, bent fairings or cowling...

White House Science Fair

NASA Image and Video Library

2014-05-27

NASA Administrator Charles Bolden poses with an all-girl engineering team that participated in the White House Science Fair. "Team Rocket Power" was one of 100 teams that qualified for last year’s Team America Rocketry Challenge (TARC). Nia'mani Robinson, 15, Jasmyn Logan, 15, and Rebecca Chapin-Ridgely, 17, gave up their weekends and free time after school to build and test their bright purple rocket, which is designed to launch to an altitude of about 750 ft, and then return a “payload” (an egg) to the ground safely. The fourth White House Science Fair was held at the White House on May 27, 2014 and included 100 students from more than 30 different states who competed in science, technology, engineering, and math (STEM) competitions. (Photo Credit: NASA/Aubrey Gemignani)

Elementary Students' Engagement in Failure-Prone Engineering Design Tasks

ERIC Educational Resources Information Center

Andrews, Chelsea Joy

2017-01-01

Although engineering education has been practiced at the undergraduate level for over a century, only fairly recently has the field broadened to include the elementary level; the pre-college division of the American Society of Engineering Education was established in 2003. As a result, while recent education standards require engineering in…

Flight service evaluation of kevlar-49 epoxy composite panels in wide-bodied commercial transport aircraft: Flight service report

NASA Technical Reports Server (NTRS)

Stone, R. H.

1981-01-01

Kevlar-49 fairing panels, installed as flight service components on three L-1011s, were inspected after 7 years service. There are six Kevlar-49 panels on each aircraft: a left hand and right hand set of a wing-body sandwich fairing; a slid laminate under-wing fillet panel; and a 422 K service aft engine fairing. The three L-1011s include one each in service with Eastern, Air Canada, and TWA. The fairings have accumulated a total of 52,500 hours, with one ship set having 17.700 hours service. The inspections were conducted at the airlines' major maintenance bases with the participation of Lockheed Engineering. The Kevlar-49 components were found to be performing satisfactorily in service with no major problems or any condition requiring corrective action. The only defects noted were minor impact damage and a minor degree of fastener hole fraying and elongation. These are for the most part comparable to damage noted on fiberglass fairings. The service history to date indicates that Kevlar-49 epoxy composite materials have satisfactory service characteristics for use in aircraft secondary structure.

Flight service evaluation of Kevlar-49 epoxy composite panels in wide-bodied commercial transport aircraft

NASA Technical Reports Server (NTRS)

Stone, R. H.

1984-01-01

Kevlar-49 fairing panels, installed as flight service components on three L-1011s, were inspected after 10 years of service. There are six Kevlar-49 panels on each aircraft: a left-hand and right-hand set of a wing-body sandwich fairing; a solid laminate under-wing fillet panel; and a 422 K (300 F) service aft engine fairing. The three L-1011s include one each in service with Eastern, Air Canada, and TWA. The fairings have accumulated a total of 79,568 hours, with one ship set having nearly 28,000 hours service. The inspections were conducted at the airlines' major maintenance bases with the participation of Lockheed Engineering. The Kevlar-49 components were found to be performing satisfactorily in service with no major problems, or any condition requiring corrective action. The only defects noted were minor impact damage, a few minor disbonds and a minor degree of fastener hole fraying and elongation. These are for the most part comparable to damage noted on fiberglass fairings. The service history obtained in this program indicates that Kevlar-49 epoxy composite materials have satisfactory service characteristics for use in aircraft secondary structure.

24 CFR 100.201a - Incorporation by reference.

Code of Federal Regulations, 2012 CFR

2012-04-01

... FAIR HOUSING DISCRIMINATORY CONDUCT UNDER THE FAIR HOUSING ACT Prohibition Against Discrimination Because of Handicap § 100.201a Incorporation by reference. (a) The following standards are incorporated by... Handicapped People, 1986 edition, (ANSI A117.1-1986) may be obtained from Global Engineering Documents, 15...

24 CFR 100.201a - Incorporation by reference.

Code of Federal Regulations, 2014 CFR

2014-04-01

... FAIR HOUSING DISCRIMINATORY CONDUCT UNDER THE FAIR HOUSING ACT Prohibition Against Discrimination Because of Handicap § 100.201a Incorporation by reference. (a) The following standards are incorporated by... Handicapped People, 1986 edition, (ANSI A117.1-1986) may be obtained from Global Engineering Documents, 15...

24 CFR 100.201a - Incorporation by reference.

Code of Federal Regulations, 2013 CFR

2013-04-01

... FAIR HOUSING DISCRIMINATORY CONDUCT UNDER THE FAIR HOUSING ACT Prohibition Against Discrimination Because of Handicap § 100.201a Incorporation by reference. (a) The following standards are incorporated by... Handicapped People, 1986 edition, (ANSI A117.1-1986) may be obtained from Global Engineering Documents, 15...

24 CFR 100.201a - Incorporation by reference.

Code of Federal Regulations, 2011 CFR

2011-04-01

... FAIR HOUSING DISCRIMINATORY CONDUCT UNDER THE FAIR HOUSING ACT Prohibition Against Discrimination Because of Handicap § 100.201a Incorporation by reference. (a) The following standards are incorporated by... Handicapped People, 1986 edition, (ANSI A117.1-1986) may be obtained from Global Engineering Documents, 15...

49 CFR 830.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... associated with the performance of, a governmental function such as firefighting, search and rescue, law... normally require major repair or replacement of the affected component. Engine failure or damage limited to an engine if only one engine fails or is damaged, bent fairings or cowling, dented skin, small...

The Priscilla and Bart Bok Award, presented by the ASP and the AAS at the Intel International Science and Engineering Fair

NASA Astrophysics Data System (ADS)

Garmany, K.

2013-04-01

The Bok Award is presented to high school students for astronomy research. While there are relatively few astronomy projects at this fair, many of the winners of this award have continued in the field of astronomy.

White House Science Fair

NASA Image and Video Library

2014-05-27

Girl Scout troop 2612 members from Tulsa, OK take photos of one another with Google Glass at the White House Science Fair Tuesday, May 27, 2014. Avery Dodson, 6; Natalie Hurley, 8; Miriam Schaffer, 8; Claire Winton, 8; and Lucy Claire Sharp, 8 participated in the Junior FIRST Lego League's Disaster Blaster Challenge, which invites elementary-school-aged students from across the country to explore how simple machines, engineering, and math can help solve problems posed by natural disasters. The girls invented the "Flood Proof Bridge" and built a model mechanizing the bridge using motors and developing a computer program to automatically retract the bridge when flood conditions are detected. The fourth White House Science Fair was held at the White House and included 100 students from more than 30 different states who competed in science, technology, engineering, and math (STEM) competitions. (Photo Credit: NASA/Aubrey Gemignani)

White House Science Fair

NASA Image and Video Library

2013-04-22

Director of Strategic Communications and Senior Science and Technology Policy Analyst, Office of Science and Technology Policy, Executive Office of the President, Rick Weiss, left, “Big Bang Theory” co-creator Bill Prady, center, and NASA Mars Curiosity Landing mission controller, Bobak "Mohawk Guy" Ferdowsi talk during the White House Science Fair held at the White House, April 22, 2013. The science fair celebrated student winners of a broad range of science, technology, engineering and math (STEM) competitions from across the country. Photo Credit: (NASA/Bill Ingalls)

Gender Aspects of Participation, Support, and Success in a State Science Fair

ERIC Educational Resources Information Center

Sonnert, Gerhard; Sadler, Philip; Michaels, Mish

2013-01-01

This study of students competing in the 2009 Massachusetts State Science & Engineering Fair investigates the role gender played in students' participation, choice of science field, award of prizes, and mentioning inspiring teachers. Females made up 62 percent of the participants and were more likely to enter projects in biology and in…

Acquisition Cycle Time: Defining the Problem

DTIC Science & Technology

2016-04-01

oversight and prescribe a more laissez - faire approach to acquisition. Others diagnose unaffordable ambitions and unnecessarily demanding requirements, and...treated as a subsystem. Systems engineering organizations need to engineer the software/avionics system – a change in leadership technical background

Obama Boosts Science Education During White House Student Fair

NASA Astrophysics Data System (ADS)

Showstack, Randy

2010-10-01

With the East Room of the White House flush with Nobel laureates and government officials, including freshly sworn-in U.S. National Science Foundation director Subra Suresh, President Barack Obama honored dozens of students who participated in a White House science fair on 18 October. The fair—many of whose participants have won other science, technology, engineering, and math (STEM) competitions—is part of a series of events that culminated 23-24 October in the USA Science and Engineering Festival on the National Mall in Washington, D. C., and at 50 satellite events around the country. “We welcome championship sports teams to the White House to celebrate their victories,” Obama said, noting that the Los Angeles Lakers basketball team, New Orleans Saints football team, and others have been to the White House. “I thought we ought to do the same thing for the winners of science fair and robotic contests and math competitions, because often we don’t give these victories the attention that they deserve. When you win first place at a science fair, nobody is rushing the field or dumping Gatorade over your head [in celebration].”

Full-Scale Wind-Tunnel Investigation of the Drag Characteristics of an HU2K Helicopter Fuselage

NASA Technical Reports Server (NTRS)

Scallion, William I.

1963-01-01

An investigation was conducted in the Langley full-scale tunnel to determine the drag characteristics of the HU2K helicopter fuselage. The effects of body shape, engine operation, appendages, and leakage on the model drag were determined. The results of the tests showed that the largest single contribution to the parasite drag was that of the rotor hub installation which produced about 80 percent of the drag of the sealed and faired production body. Fairings on the rotor hub and blade retentions, or a cleaned-up hub and retentions, appeared to be the most effective single modifications tested. The total drag of all protuberances and air leakage also contributed a major part of the drag - an 83-percent increase over the drag of the sealed and faired production body. An additional increment of drag was caused by the basic shape of the fuselage - 19 percent more than the drag obtained when the fuselage shape was extensively refaired. Another sizable increment of drag was caused by the engine oil-cooler exit which gave a drag of 8 percent of that of the sealed and faired production body.

Flight service evaluation of Kevlar-49 epoxy composite panels in wide-bodied commercial transport aircraft

NASA Technical Reports Server (NTRS)

Stone, R. H.

1979-01-01

Kevlar-49 fairing panels, installed as flight service components on three L-1011s, were inspected after five years' service. There are six Kevlar-49 panels on each aircraft: a left-hand and right-hand set of a wing-body sandwich fairing; a solid laminate under-wing fillet panel; and a 150 C (300 F) service aft engine fairing. The fairings have accumulated a total of 40,534 hours, with one ship set having 16,091 hours service as of Feb. 11, 1979. The Kevlar-49 components were found to be performing satisfactorily in service with no major problems, or any condition requiring corrective action. The only defects noted were minor impact damage, and a minor degree of fastener hole fraying and elongation. These are for the most part comparable to damage noted on fiberglass fairings.

Gender Differences in the Careers of Academic Scientists and Engineers: A Literature Review. Special Report.

ERIC Educational Resources Information Center

Bentley, Jerome T.; Adamson, Rebecca

The literature on women in science and engineering is extensive and addresses such issues as early education, decision to study and pursue careers in science, and how women fair in their jobs. This review used the literature on the careers of women scientists and engineers employed in academia to examine how women in these disciplines fare…

Solving the Equation: The Variables for Women's Success in Engineering and Computing

ERIC Educational Resources Information Center

Corbett, Christianne; Hill, Catherine

2015-01-01

During the 2014 White House Science Fair, President Barack Obama used a sports metaphor to explain why we must address the shortage of women in science, technology, engineering, and mathematics (STEM), particularly in the engineering and computing fields: "Half our team, we're not even putting on the field. We've got to change those…

Solving the Equation: The Variables for Women's Success in Engineering and Computing. Executive Summary

ERIC Educational Resources Information Center

Corbett, Christianne; Hill, Catherine

2015-01-01

During the 2014 White House Science Fair, President Barack Obama used a sports metaphor to explain why we must address the shortage of women in science, technology, engineering, and mathematics (STEM), particularly in the engineering and computing fields: "Half our team, we're not even putting on the field. We've got to change those…

My Path Into X-Ray, Optics and Pressure: Experiences and Achievements

NASA Astrophysics Data System (ADS)

Evans, William

2013-04-01

A successful career path in science is rarely formulaic or achieved by following a predefined set of actions. Sustained commitment, perseverance, performance and relationships are all key ingredients. Judicious selection of opportunities (research projects, employers, etc.) can lead to significant scientific accomplishments and career advancements. In this presentation I will review the trajectory of my scientific career spanning my experiences from the Westinghouse STS and ISEF, through Caltech and Harvard to my current position of High Pressure Physics Group Leader at Lawrence Livermore National Laboratory. I will discuss my involvement in some exciting research projects using x-ray synchrotron sources and optical spectroscopy to study static and dynamic properties of materials at high-pressures. In addition, I will share my perspectives on the importance of excellence, preparedness and the value of professional relationships.

76 FR 61643 - Airworthiness Directives; The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-05

... thumbnail fairing edge seals on both sides of the engines with Nitronic 60 stainless steel alloy seals. This proposed AD was prompted by reports of excessive in-service wear damage of the thumbnail fairing edge seal... failure of the fire seal, which could allow a fire in the fan compartment to spread beyond the firewall...

Civil Society in Nigeria: Reasons for Ineffectiveness

DTIC Science & Technology

2015-03-01

experiencing the trickle-down benefits that Smith foretells of an essentially laissez - faire regulatory market system. Any economic surplus is quickly...ENDURING ENGINE OF TRUST EROSION ...53 1. Leadership and Policymaking in a Trust-Deficit Environment ....55 2. The Niger Delta: Corruption and...from the participation of opposing sides in free and fair elections.11 Democratic governance is seen as an ideal that incorporates a regime, the

WHK Interns Sweep Entire Category at Frederick County Science Fair | Poster

Cancer.gov

By Nancy Parrish, Staff Writer The competitors in the cellular and molecular biology category of the Frederick County Science and Engineering Fair on March 22–23 didn’t stand a chance against the Werner H. Kirsten student interns at the National Cancer Institute at Frederick. These interns swept the entire category, with Madelyne Xiao, a rising intern, winning first place;

Flow Control about an Airborne Laser Turret

DTIC Science & Technology

1982-06-01

that houses the laser telescope• Afterbody f=airing and f•iselage boundary layer suction were employed with porous material added when necessary to...Thesis Advisor Chairman, D partment of Aeronautics Dean of Scienci arnd Engineering 3 ABSTRACT This thesis project is the latest in a series of...that houses the laser telescope. Afterbody fairing and fuselage boundary layer suction were employed with porous material added when necessary to

White House Maker Faire

NASA Image and Video Library

2014-06-18

The Maker Faire trailer is seen outside the rose garden during the first ever White House Maker Faire, which brings together students, entrepreneurs, and everyday citizens who are using new tools and techniques to launch new businesses, learn vital skills in science, technology, engineering, and math (STEM), and fuel the renaissance in American manufacturing, at the White House, Wednesday, June 18, 2014 in Washington. The President announced new steps the Administration and its partners are taking to support the ability of more Americans, young and old, to have to access to these tools and techniques and brings their ideas to life. Photo Credit: (NASA/Bill Ingalls)

White House Science Fair

NASA Image and Video Library

2014-05-27

Crystal Brockington and Aaron Barron, both 18 years old, designed a more efficient and cost effective solar cell that harnesses energy without cadmium, which has been shown to be harmful to the environment. They were selected to participate in the White House Science Fair after they were awarded the High School Grand Prize at the Siemens We Can Change the World Challenge. The fourth White House Science Fair was held at the White House on May 27, 2014 and included 100 students from more than 30 different states who competed in science, technology, engineering, and math (STEM) competitions. (Photo Credit: NASA/Aubrey Gemignani)

High school science fair and research integrity

PubMed Central

Dalley, Simon; Shepherd, Karen; Reisch, Joan

2017-01-01

Research misconduct has become an important matter of concern in the scientific community. The extent to which such behavior occurs early in science education has received little attention. In the current study, using the web-based data collection program REDCap, we obtained responses to an anonymous and voluntary survey about science fair from 65 high school students who recently competed in the Dallas Regional Science and Engineering Fair and from 237 STEM-track, post-high school students (undergraduates, 1st year medical students, and 1st year biomedical graduate students) doing research at UT Southwestern Medical Center. Of the post-high school students, 24% had competed in science fair during their high school education. Science fair experience was similar overall for the local cohort of Dallas regional students and the more diverse state/national cohort of post-high school students. Only one student out of 122 reported research misconduct, in his case making up the data. Unexpectedly, post-high school students who did not participate in science fair anticipated that carrying out science fair would be much more difficult than actually was the case, and 22% of the post-high school students anticipated that science fair participants would resort to research misconduct to overcome obstacles. No gender-based differences between students’ science fair experiences or expectations were evident. PMID:28328976

High school science fair and research integrity.

PubMed

Grinnell, Frederick; Dalley, Simon; Shepherd, Karen; Reisch, Joan

2017-01-01

Research misconduct has become an important matter of concern in the scientific community. The extent to which such behavior occurs early in science education has received little attention. In the current study, using the web-based data collection program REDCap, we obtained responses to an anonymous and voluntary survey about science fair from 65 high school students who recently competed in the Dallas Regional Science and Engineering Fair and from 237 STEM-track, post-high school students (undergraduates, 1st year medical students, and 1st year biomedical graduate students) doing research at UT Southwestern Medical Center. Of the post-high school students, 24% had competed in science fair during their high school education. Science fair experience was similar overall for the local cohort of Dallas regional students and the more diverse state/national cohort of post-high school students. Only one student out of 122 reported research misconduct, in his case making up the data. Unexpectedly, post-high school students who did not participate in science fair anticipated that carrying out science fair would be much more difficult than actually was the case, and 22% of the post-high school students anticipated that science fair participants would resort to research misconduct to overcome obstacles. No gender-based differences between students' science fair experiences or expectations were evident.

33 CFR 211.146 - Price.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE REAL ESTATE ACTIVITIES OF THE CORPS OF ENGINEERS IN CONNECTION WITH CIVIL WORKS PROJECTS Conveyances for Public Port Or Industrial Facilities § 211.146 Price. No conveyance shall be made for a price less than the fair market...

33 CFR 211.146 - Price.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE REAL ESTATE ACTIVITIES OF THE CORPS OF ENGINEERS IN CONNECTION WITH CIVIL WORKS PROJECTS Conveyances for Public Port Or Industrial Facilities § 211.146 Price. No conveyance shall be made for a price less than the fair market...

White House Maker Faire

NASA Image and Video Library

2014-06-18

Joey Hudy demonstrates his Intel Galileo-based 10x10x10 LED Cube during the first ever White House Maker Faire which brings together students, entrepreneurs, and everyday citizens who are using new tools and techniques to launch new businesses, learn vital skills in science, technology, engineering, and math (STEM), and fuel the renaissance in American manufacturing, at the White House, Wednesday, June 18, 2014 in Washington. Photo Credit: (NASA/Bill Ingalls)

Science fair: Is it worth the work? A qualitative study on deaf students' perceptions and experiences regarding science fair in primary and secondary school

NASA Astrophysics Data System (ADS)

Smith, Vivian Lee

Science fairs have a long history in American education. They play an important role for establishing inquiry-based experiences in a science classroom. Students may be more motivated to learn science content when they are allowed to choose their own science fair topics. The purpose of this study was to examine Deaf college students' perceptions and experiences regarding science fair participation during primary and/or secondary school and determine the influence of science fair involvement on the development of language skills, writing skills, and higher order thinking skills as well as its impact on choice of a STEM major. This study examined responses from Deaf students attending Gallaudet University and National Technical Institute for the Deaf (NTID) majoring in a Science, Technology, Engineering, or Math (STEM) field. An electronic questionnaire and a semi-structured interview were used to collect data. The electronic questionnaire was divided into two strands: demographics and science fair experience. Twenty-one respondents participated in the questionnaire and ten participants were interviewed. A cross-case analysis revealed communication was the key to a successful science fair experience. Findings showed the educational background of participants influenced their perspective regarding the experience of a science fair. When communicating through American Sign Language, the science fair experience was more positive. When communicating through an interpreter or having no interpreter at all, the science fair experience was viewed in a negative light. The use of science fairs to enhance language development, writing skills, and higher order thinking skills was supported. Teachers and parents were strong influences for Deaf students participating in a science fair. Participation in a science fair did influence students to choose a STEM major but there were other considerations as well.

White House Maker Faire

NASA Image and Video Library

2014-06-18

Lindsay Lawlor, of San Diego, Calif., left, demonstrates his creation, a 17-foot-tall, robotic giraffe that "walks" on wheels and is powered by a 12-horsepower hybrid fuel-engine motor, during the first ever White House Maker Faire, which brings together students, entrepreneurs, and everyday citizens who are using new tools and techniques to launch new businesses, learn vital skills in science, technology, engineering, and math (STEM), and fuel the renaissance in American manufacturing, at the White House, Wednesday, June 18, 2014 in Washington. The President announced new steps the Administration and its partners are taking to support the ability of more Americans, young and old, to have to access to these tools and techniques and brings their ideas to life. Photo Credit: (NASA/Bill Ingalls)

Taking Engineering Design out for a Spin

ERIC Educational Resources Information Center

Crismond, David; Soobyiah, Mark; Cain, Ryan

2013-01-01

This article highlights what inquiry and design have in common, and what makes engineering design uniquely different from inquiry. A case study is presented that gives students practice in conducting fair-test experiments, in troubleshooting to learn how to make designs better, and in building science-based explanations for how things work. The…

29 CFR 793.11 - Combination announcer, news editor and chief engineer.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Combination announcer, news editor and chief engineer. 793...)(9) OF THE FAIR LABOR STANDARDS ACT Requirements for Exemption § 793.11 Combination announcer, news... as a news editor. In such cases, the primary employment test under the section 13(b)(9) exemption...

29 CFR 793.11 - Combination announcer, news editor and chief engineer.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Combination announcer, news editor and chief engineer. 793...)(9) OF THE FAIR LABOR STANDARDS ACT Requirements for Exemption § 793.11 Combination announcer, news... as a news editor. In such cases, the primary employment test under the section 13(b)(9) exemption...

29 CFR 793.11 - Combination announcer, news editor and chief engineer.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Combination announcer, news editor and chief engineer. 793...)(9) OF THE FAIR LABOR STANDARDS ACT Requirements for Exemption § 793.11 Combination announcer, news... as a news editor. In such cases, the primary employment test under the section 13(b)(9) exemption...

Versatile Desktop Experiment Module (DEMo) on Heat Transfer

ERIC Educational Resources Information Center

Minerick, Adrienne R.

2010-01-01

This paper outlines a new Desktop Experiment Module (DEMo) engineered for a chemical engineering junior-level Heat Transfer course. This new DEMo learning tool is versatile, fairly inexpensive, and portable such that it can be positioned on student desks throughout a classroom. The DEMo system can illustrate conduction of various materials,…

Flight service evaluation of Kevlar-49 epoxy composite panels in wide-bodies commercial transport aircraft

NASA Technical Reports Server (NTRS)

Stone, R. H.

1983-01-01

Kevlar-49 fairing panels, installed as flight service components on three L-1011s, were inspected after 9 years of service. There are six Kevlar-49 panels on each aircraft: a left hand and right hand set of a wing body sandwich fairing; a solid laminate under wing fillet panel; and a 422 K (300 F) service aft engine fairing. The fairings have accumulated a total of 70,000 hours, with one ship set having over 24,000 hours service. The Kevlar-49 components were found to be performing satisfactorily in service with no major problems, or any condition requiring corrective action. The only defects noted were minor impact damage, a few minor disbonds and a minor degree of fastener hole fraying and elongation. These are for the most part comparable to damage noted on fiberglass fairings. The service history to date indicates that Kevlar-49 epoxy composite materials have satisfactory service characteristics for use in aircraft secondary structure.

Wind Tunnel Tests of Large- and Small-Scale Rotor Hubs and Pylons

DTIC Science & Technology

1981-04-01

formed by the engine nacelle and the nose gearbox. A fairing was wrapped around the nose gearbox and blended into the top and bottom of the engine...the variation is due to the FABs installation which acts like a small winglet . The large excursion ahead of Station 200 is due to the wing, the flow

A Science, Engineering and Technology (SET) Approach Improves Science Process Skills in 4-H Animal Science Participants

ERIC Educational Resources Information Center

Clarke, Katie C.

2010-01-01

A new Science, Engineering and Technology (SET) approach was designed for youth who participated in the Minnesota State Fair Livestock interview process. The project and evaluation were designed to determine if the new SET approach increased content knowledge and science process skills in participants. Results revealed that youth participants not…

Flight service evaluation of Kevlar-49/epoxy composite panels in wide-bodied commercial transport aircraft

NASA Technical Reports Server (NTRS)

Stone, R. H.

1977-01-01

Kevlar-49 fairing panels, installed as flight service components on three L-1011s, were inspected after three years' service, and found to be performing satisfactorily. There are six Kevlar-49 panels on each aircraft, including sandwich and solid laminate wing-body panels, and 150 C service aft engine fairings. The service history to date indicates that Kevlar-49 epoxy composite materials have satisfactory service characteristics for use in aircraft secondary structure.

Performance of Hoods for Aircraft Exhaust-Gas Turbines

DTIC Science & Technology

1946-11-01

vanes and hood-entrance fairing band at a blade -to- Jet speed ratio of 0.4 and a pressure ratio’ of 2.0. Aircraft Engine Research Laboratory... engine , the gases leave the turbine with an axial velocity of about 700 feet per second. At an airspeed of 375 miles_ per hour, a jet power...importance of providing efficient exhaust hoods for turbine - compressor jet -propulsion engines is even more obvious as all the power of these units is

How to implement the Science Fair Self-Help Development Program in schools

DOE Office of Scientific and Technical Information (OSTI.GOV)

Menicucci, D.

1994-01-01

This manual is intended to act as a working guide for setting up a Science Fair Volunteer Support Committee at your school. The Science Fair Volunteer Support Committee, or SFVSC, is the key component of the Science Fair Self-Help program, which was developed by Sandia National Laboratories and is designed to support a school`s science activities. The SFVSC is a team of parents and community volunteers who work in concert with a school`s teaching staff to assist and manage all areas of a school Science and Engineering Fair. The main advantage of creating such a committee is that it freesmore » the science teachers from the organizational aspects of the fair and lets them concentrate on their job of teaching science. This manual is based on information gained through a Self-Help Development pilot program that was developed by Sandia National Laboratories during the 1991--92 school year at three Albuquerque, NM, middle schools. The manual describes the techniques that were successful in the pilot program and discusses how these techniques might be implemented in other schools. This manual also discusses problems that may be encountered, including suggestions for how they might be resolved.« less

WHK Interns Sweep Entire Category at Frederick County Science Fair | Poster

Cancer.gov

By Nancy Parrish, Staff Writer The competitors in the cellular and molecular biology category of the Frederick County Science and Engineering Fair on March 22–23 didn’t stand a chance against the Werner H. Kirsten student interns at the National Cancer Institute at Frederick. These interns swept the entire category, with Madelyne Xiao, a rising intern, winning first place; Maria Hamscher, second place; Ashley Babyak and Dahlia Kronfli tying for third place; and Maham Ahmed receiving an honorable mention.

Automated design of minimum drag light aircraft fuselages and nacelles

NASA Technical Reports Server (NTRS)

Smetana, F. O.; Fox, S. R.; Karlin, B. E.

1982-01-01

The constrained minimization algorithm of Vanderplaats is applied to the problem of designing minimum drag faired bodies such as fuselages and nacelles. Body drag is computed by a variation of the Hess-Smith code. This variation includes a boundary layer computation. The encased payload provides arbitrary geometric constraints, specified a priori by the designer, below which the fairing cannot shrink. The optimization may include engine cooling air flows entering and exhausting through specific port locations on the body.

Selected Core Thinking Skills and Cognitive Strategy of an Expert and Novice Engineer

ERIC Educational Resources Information Center

Dixon, Raymond A.

2011-01-01

This exploratory study highlights certain differences in the way an expert and a novice engineer used their analyzing and generating skills while solving a fairly ill-structured design problem. The expert tends to use more inferences and elaboration when solving the design problem and the novice tend to use analysis that is focused on the…

Reaching Out: Team AETHER

NASA Technical Reports Server (NTRS)

Murphy, Gloria A.

2010-01-01

Embry Riddle Aeronautical University's Daytona Beach Campus Lunabotics Team took the opportunity to share the love of space, engineering and technology through the educational outreach portion of the competition. Through visits to elementary schools and high schools, and through support of science fairs and robotics competitions, younger generations were introduced to space, engineering and robotics. This report documents the outreach activities of team Aether.

A Team Building Model for Software Engineering Courses Term Projects

ERIC Educational Resources Information Center

Sahin, Yasar Guneri

2011-01-01

This paper proposes a new model for team building, which enables teachers to build coherent teams rapidly and fairly for the term projects of software engineering courses. Moreover, the model can also be used to build teams for any type of project, if the team member candidates are students, or if they are inexperienced on a certain subject. The…

Productivity improvement through industrial engineering in the semiconductor industry

NASA Astrophysics Data System (ADS)

Meyersdorf, Doron

1996-09-01

Industrial Engineering is fairly new to the semiconductor industry, though the awareness to its importance has increased in recent years. The US semiconductor industry in particular has come to the realization that in order to remain competitive in the global market it must take the lead not only in product development but also in manufacturing. Industrial engineering techniques offer one ofthe most effective strategies for achieving manufacturing excellence. Industrial engineers play an important role in the success of the manufacturing facility. This paper defines the Industrial engineers role in the IC facility, set the visions of excellence in semiconductor manufacturing and highlights 10 roadblocks on the journey towards manufacturing excellence.

Computer Design Technology of the Small Thrust Rocket Engines Using CAE / CAD Systems

NASA Astrophysics Data System (ADS)

Ryzhkov, V.; Lapshin, E.

2018-01-01

The paper presents an algorithm for designing liquid small thrust rocket engine, the process of which consists of five aggregated stages with feedback. Three stages of the algorithm provide engineering support for design, and two stages - the actual engine design. A distinctive feature of the proposed approach is a deep study of the main technical solutions at the stage of engineering analysis and interaction with the created knowledge (data) base, which accelerates the process and provides enhanced design quality. The using multifunctional graphic package Siemens NX allows to obtain the final product -rocket engine and a set of design documentation in a fairly short time; the engine design does not require a long experimental development.

Afterschool: Middle School and Science, Technology, Engineering and Math (STEM). MetLife Foundation Afterschool Alert. Issue Brief No. 44

ERIC Educational Resources Information Center

Afterschool Alliance, 2010

2010-01-01

The 21st Century's information economy has been creating more jobs that require not only a college education but also a fair amount of expertise in the fields of science, technology, engineering and math--collectively known as STEM. The last several decades have seen the industrial- and manufacturing-based economy shift to a service economy fueled…

An Examination of the Selection Criteria Used in the Architect-Engineer Selection Process of Air Force Base Civil Engineers.

DTIC Science & Technology

1987-09-01

overall goal of hiring highly qualified firms on a fair basis. In conducting this research and writing its report of findings, I have benefited greatly... it . Introduction................... . . ... .. .. ..... Overview.................. . . ... .. .. ... Background........ ...... .. .. ...... Focus of...the focus of the study, its purpose and justification, its specific objective, and the scope of the study’s application. Background In recent years

29 CFR 793.10 - Primary employment in named occupation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AND TELEVISION STATION EMPLOYEES FROM OVERTIME PAY REQUIREMENTS UNDER SECTION 13(b)(9) OF THE FAIR... employed “primarily” as an announcer, news editor, or chief engineer. Thus the Senate Report states: “The...

29 CFR 793.5 - What determines application of the exemption.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AND TELEVISION STATION EMPLOYEES FROM OVERTIME PAY REQUIREMENTS UNDER SECTION 13(b)(9) OF THE FAIR... exemption applies only to an employee who is “employed as” an announcer, news editor, or chief engineer...

Ascent Heating Thermal Analysis on the Spacecraft Adaptor (SA) Fairings and the Interface with the Crew Launch Vehicle (CLV)

NASA Technical Reports Server (NTRS)

Wang, Xiao-Yen; Yuko, James; Motil, Brian

2009-01-01

When the crew exploration vehicle (CEV) is launched, the spacecraft adaptor (SA) fairings that cover the CEV service module (SM) are exposed to aero heating. Thermal analysis is performed to compute the fairing temperatures and to investigate whether the temperatures are within the material limits for nominal ascent aero heating case. Heating rates from Thermal Environment (TE) 3 aero heating analysis computed by engineers at Marshall Space Flight Center (MSFC) are used in the thermal analysis. Both MSC Patran 2007r1b/Pthermal and C&R Thermal Desktop 5.1/Sinda models are built to validate each other. The numerical results are also compared with those reported by Lockheed Martin (LM) and show a reasonably good agreement.

Center Director Bridges visits Disability Awareness and Action working Group Technology Fair

NASA Technical Reports Server (NTRS)

1999-01-01

Center Director Roy Bridges stops at the Stewart Eye Institute table at the Disability Awareness and Action Working Group (DAAWG) 1999 Technology Fair being held Oct. 20-21 at Kennedy Space Center. Behind Bridges is Sterling Walker, director of Engineering Development at KSC and chairman of DAAWG. At the near right are George and Marian Hall, who are with the Institute. At the left is Nancie Strott, a multi-media specialist with Dynacs and chairperson of the Fair. The Fair is highlighting vendors demonstrating mobility, hearing, vision and silent disability assistive technology. The purpose is to create an awareness of the types of technology currently available to assist people with various disabilities in the workplace. The theme is that of this year's National Disability Employment Awareness Month, 'Opening Doors to Ability.' Some of the vendors participating are Canine Companions for Independence, Goodwill Industries, Accessible Structures, Division of Blind Services, Space Coast Center for Independent Living, KSC Fitness Center and Delaware North Parks Services.

Center Director Bridges visits Disability Awareness and Action working Group Technology Fair

NASA Technical Reports Server (NTRS)

1999-01-01

Center Director Roy Bridges stops to talk to one of the vendors at the Disability Awareness and Action Working Group (DAAWG) Technology Fair being held Oct. 20-21 at Kennedy Space Center. With him at the far left is Sterling Walker, director of Engineering Development at KSC and chairman of DAAWG, and Nancie Strott, a multi-media specialist with Dynacs and chairperson of the Fair; at the right is Carol Cavanaugh, with KSC Public Services. The Fair is highlighting vendors demonstrating mobility, hearing, vision and silent disability assistive technology. The purpose is to create an awareness of the types of technology currently available to assist people with various disabilities in the workplace. The theme is that of this year's National Disability Employment Awareness Month, 'Opening Doors to Ability.' Some of the vendors participating are Canine Companions for Independence, Goodwill Industries, Accessible Structures, Division of Blind Services, Space Coast Center for Independent Living, KSC Fitness Center and Delaware North Parks Services.

Center Director Bridges visits Disability Awareness and Action working Group Technology Fair

NASA Technical Reports Server (NTRS)

1999-01-01

Center Director Roy Bridges stops to pet one of the dogs that serves with Canine Companions for Independence, a vendor displaying its capabilities at the Disability Awareness and Action Working Group (DAAWG) 1999 Technology Fair being held Oct. 20-21 at Kennedy Space Center. Standing at the right is Carol Cavanaugh, with KSC Public Services; behind Bridges is Nancie Strott (left), a multi-media specialist with Dynacs and chairperson of the Fair, and Sterling Walker (right), director of Engineering Development and chairman of DAAWG. The Fair is highlighting vendors demonstrating mobility, hearing, vision and silent disability assistive technology. The purpose is to create an awareness of the types of technology currently available to assist people with various disabilities in the workplace. The theme is that of this year's National Disability Employment Awareness Month, 'Opening Doors to Ability.' Some of the other vendors participating are Goodwill Industries, Accessible Structures, Division of Blind Services, Space Coast Center for Independent Living, KSC Fitness Center and Delaware North Parks Services.

Expedition 49 Preflight

NASA Image and Video Library

2016-10-11

The Soyuz MS-02 spacecraft is seen as the work platforms around it are retracted in preparation for being encapsulated in its fairing on Thursday, Tuesday, Oct. 11, 2016 at the Baikonur Cosmodrome in Kazakhstan. Expedition 49 flight engineer Shane Kimbrough of NASA, flight engineer Andrey Borisenko of Roscosmos, and Soyuz commander Sergey Ryzhikov of Roscosmos are scheduled to launch from the Baikonur Cosmodrome in Kazakhstan on Oct. 19. Photo Credit: (NASA/Victor Zelentsov)

Productivity improvement through industrial engineering in the semiconductor industry

NASA Astrophysics Data System (ADS)

Meyersdorf, Doron

1996-09-01

Industrial engineering is fairly new to the semiconductor industry, though the awareness to its importance has increased in recent years. The U.S. semiconductor industry in particular has come to the realization that in order to remain competitive in the global market it must take the lead not only in product development but also in manufacturing. Industrial engineering techniques offer one of the most effective strategies for achieving manufacturing excellence. Industrial engineers play an important role in the success of the manufacturing facility. This paper defines the industrial engineers role in the IC facility, sets the visions of excellence in semiconductor manufacturing and highlights 10 roadblocks on the journey towards manufacturing excellence.

Making science education meaningful for American Indian students: The effect of science fair participation

NASA Astrophysics Data System (ADS)

Welsh, Cynthia Ann

Creating opportunities for all learners has not been common practice in the United States, especially when the history of Native American educational practice is examined (Bull, 2006; Chenoweth, 1999; Starnes, 2006a). The American Indian Science and Engineering Society (AISES) is an organization working to increase educational opportunity for American Indian students in science, engineering, and technology related fields (AISES, 2005). AISES provides pre-college support in science by promoting student science fair participation. The purpose of this qualitative research is to describe how American Indian student participation in science fairs and the relationship formed with their teacher affects academic achievement and the likelihood of continued education beyond high school. Two former American Indian students mentored by the principal investigator participated in this study. Four ethnographic research methods were incorporated: participant observation, ethnographic interviewing, search for artifacts, and auto-ethnographic researcher introspection (Eisenhart, 1988). After the interview transcripts, photos documenting past science fair participation, and researcher field notes were analyzed, patterns and themes emerged from the interviews that were supported in literature. American Indian academic success and life long learning are impacted by: (a) the effects of racism and oppression result in creating incredible obstacles to successful learning, (b) positive identity formation and the importance of family and community are essential in student learning, (c) the use of best practice in science education, including the use of curricular cultural integration for American Indian learners, supports student success, (d) the motivational need for student-directed educational opportunities (science fair/inquiry based research) is evident, (e) supportive teacher-student relationships in high school positively influences successful transitions into higher education. An overarching theme presented itself embedded within all themes: the importance of understanding the continued resiliency of the American Indian culture as it relates to success. Ultimately, for long-lasting change to occur, teachers and the community must focus on eliminating educational barriers, while supporting academic success, in order to initiate renewal and school wide change.

ANNUAL REPORT, JULY 1, 1960

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1961-10-31

Research facilities, general construction progress, research activities, and administration are discussed and a financial statement is given. Fairly detailed accounts are given of research programs in the fields of physics, accelerator development, instrumentation, applied mathematics, chemistry, nuclear engineering, biology, and medicine. (M.C.G.)

Can participation in a school science fair improve middle school students' attitudes toward science and interest in science careers?

NASA Astrophysics Data System (ADS)

Finnerty, Valerie

The purpose of this study was to investigate whether participation in a school-based science fair affects middle school students' attitudes toward science and interest in science and engineering careers. A quasi-experimental design was used to compare students' pre- and posttest attitudes toward and interest in science. Forty-eight of the 258 participants completed a school-based science fair during the study. In addition, twelve middle school science teachers completed an online survey. Both the Survey of Science Attitudes and Interest I and II (SSAI-I and II) measured students' attitudes toward and interest in science and science and mathematics self-efficacy, asked about classroom inquiry experiences and gathered demographic information. An online survey gathered qualitative data about science teachers' perceptions of school science fairs. The results showed no significant interactions among completion of a science fair project and attitudes toward and interest in science, science and mathematics self-efficacy or gender. There were significant differences at both pre- and posttest in attitudes between the students who did and did not complete a science fair project. All participating teachers believed that participation in science fairs could have a positive effect on students' attitudes and interest, but cited lack of time as a major impediment. There was significant interaction between level of classroom inquiry and attitudes and interest in science; students who reported more experiences had higher scores on these measures. Classroom inquiry also interacted with the effects of a science fair and participants' pre- and posttest attitude scores. Finally, the amount and source of assistance on a science fair project had a significant impact on students' posttest measures. Major limitations which affect the generalization of these findings include the timing of the administration of the pretest, the number of participants in the experimental group and differences in the science fair procedures at the participating schools. Embedded in a curriculum that includes the teaching of inquiry practices, science fairs may play a role in the inspiration of future scientists, but more research needs to be done on the quality of students' experiences, including amount and type of classroom instruction before and during the science fair process.

White House Maker Faire

NASA Image and Video Library

2014-06-18

President Barack Obama delivers his remarks at the first ever White House Maker Faire, which brings together students, entrepreneurs, and everyday citizens who are using new tools and techniques to launch new businesses, learn vital skills in science, technology, engineering, and math (STEM), and fuel the renaissance in American manufacturing, at the White House, Wednesday, June 18, 2014 in Washington. The President announced new steps the Administration and its partners are taking to support the ability of more Americans, young and old, to have to access to these tools and techniques and brings their ideas to life. Photo Credit: (NASA/Bill Ingalls)

InSight Atlas V Fairing Rotate to Vertical

NASA Image and Video Library

2018-02-07

In the Astrotech facility at Vandenberg Air Force Base in California, technicians and engineers inspect the payload fairing for the United Launch Alliance (ULA) Atlas V for NASA's upcoming Interior Exploration using Seismic Investigations, Geodesy and Heat Transport, or InSight, mission to land on Mars after it was lifted to the vertical position. InSight is the first mission to explore the Red Planet's deep interior. It will investigate processes that shaped the rocky planets of the inner solar system including Earth. Liftoff atop a ULA Atlas V rocket is scheduled for May 5, 2018.

The Amateur Scientist.

ERIC Educational Resources Information Center

Walker, Jearl

1979-01-01

Describes a student investigation of a reverse flame in a atmosphere of methane that won second place in the physics division of the International Science and Engineering Fair. Includes a discussion of falling and fracturing behavior, specifically dealing with chimneys, trees, pencil point, stirring rods, and chalk. (BT)

Career Fairs | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Job Hunting in Tougher Times.

ERIC Educational Resources Information Center

Ross, Steven S.

1985-01-01

Several resources to consider are offered to ease the squeeze created by the computer market downturn. Areas addressed include: job-shop option; other-industries option; overseas option; graduate school option; entrepreneurial option; military option; job fairs; and weighing locations. Notes that colleges are looking for engineering teachers,…

Flight research on natural laminar flow nacelles - A progress report

NASA Technical Reports Server (NTRS)

Hastings, E. C., Jr.; Schoenster, J. A.; Obara, C. J.; Dodbele, S. S.

1986-01-01

This paper presents a progress report on an ongoing flight experiment for natural laminar flow nacelles. The results given herein were obtained during the first phase of the experiment, in which an instrumented natural laminar flow nacelle fairing was flight tested in the presence of turbofan engine noise and a controlled noise source. The results indicate that with the controlled noise source off, natural laminar flow was measured as far aft as 37 percent of the fairing length. The transition front was irregular in contour, and the extent of natural laminar flow was significantly affected by the relative flow angle for the fairing. In addition to these test results, the paper discusses the results of some recent computational analyses to predict pressure distributions and transition location, and to explain some of the data trends. Comparisons between measured and predicted data indicate that the analytical methods successfully predicted trends for the baseline (no controlled noise source) studies.

KSC-99pp1229

NASA Image and Video Library

1999-10-20

Center Director Roy Bridges stops at the Stewart Eye Institute table at the Disability Awareness and Action Working Group (DAAWG) 1999 Technology Fair being held Oct. 20-21 at Kennedy Space Center. Behind Bridges is Sterling Walker, director of Engineering Development at KSC and chairman of DAAWG. At the near right are George and Marian Hall, who are with the Institute. At the left is Nancie Strott, a multi-media specialist with Dynacs and chairperson of the Fair. The Fair is highlighting vendors demonstrating mobility, hearing, vision and silent disability assistive technology. The purpose is to create an awareness of the types of technology currently available to assist people with various disabilities in the workplace. The theme is that of this year's National Disability Employment Awareness Month, "Opening Doors to Ability." Some of the vendors participating are Canine Companions for Independence, Goodwill Industries, Accessible Structures, Division of Blind Services, Space Coast Center for Independent Living, KSC Fitness Center and Delaware North Parks Services

KSC-99pp1230

NASA Image and Video Library

1999-10-20

Center Director Roy Bridges stops to talk to one of the vendors at the Disability Awareness and Action Working Group (DAAWG) Technology Fair being held Oct. 20-21 at Kennedy Space Center. With him at the far left is Sterling Walker, director of Engineering Development at KSC and chairman of DAAWG, and Nancie Strott, a multi-media specialist with Dynacs and chairperson of the Fair; at the right is Carol Cavanaugh, with KSC Public Services. The Fair is highlighting vendors demonstrating mobility, hearing, vision and silent disability assistive technology. The purpose is to create an awareness of the types of technology currently available to assist people with various disabilities in the workplace. The theme is that of this year's National Disability Employment Awareness Month, "Opening Doors to Ability." Some of the vendors participating are Canine Companions for Independence, Goodwill Industries, Accessible Structures, Division of Blind Services, Space Coast Center for Independent Living, KSC Fitness Center and Delaware North Parks Services

Internet Search Engines: Copyright’s Fair Use in Reproduction and Public Display Rights

DTIC Science & Technology

2007-07-12

asks, in other words, whether and to what extent the new work is transformative.” Campbell v. Acuff-Rose Music , Inc., 510 U.S. 569, 579 (1994). 10...purposes. It cited the U.S. Supreme Court’s decision in Sony Corp. v. Universal Studios, Inc.22 and Kelly, supra, as examples where copying of an...image may have been created originally to serve an entertainment , aesthetic, or informative function, a search engine transforms the image into a pointer

Heat Transfer Due to Unsteady Effects as Investigated in a High-Speed, Full-Scale, Fully-Cooled Turbine Vane and Rotor Stage

DTIC Science & Technology

2008-06-01

the turbine stages of these engines have been established. The predominant method of cooling vane and rotor airfoils , having been used for over...INVESTIGATED IN A HIGH-SPEED, FULL-SCALE, FULLY-COOLED TURBINE VANE AND ROTOR STAGE THESIS Presented to the Faculty Department of Aeronautics and...reduce the effectiveness of film cooling in the vane and rotor stages of turbine engines . Even today, fairly little experimentation has been

Correlation of Mixture Temperature Data Obtained from Bare Intake-manifold Thermocouples

NASA Technical Reports Server (NTRS)

White, H. Jack; Gammon, Goldie L

1946-01-01

A relatively simple equation has been found to express with fair accuracy, variation in manifold-charge temperature with charge in engine operating conditions. This equation and associated curves have been checked by multi cylinder-engine data, both test stand and flight, over a wide range of operating conditions. Average mixture temperatures, predicted by the equations of this report, agree reasonably well with results within the same range of carburetor-air temperatures from laboratories and test stands other than the NACA.

National Dam Inspection Program. Keen Lake Dam (NDI Number PA-00092, Der Number 64-13), Delaware River Basin. Phase I Inspection Report.

DTIC Science & Technology

1980-01-01

Lake bal; 1.fs iv 𔃻. 2 EVAI 17,,6 !1 ’,!L1i c valu t (it 1t -l t WIh lit S is fair .* ii I ’ t.it t lbankmitt ,hiouild r,-move,i .ini -- ’ co ’rIt e...note that f a dam depends on numerous and constantly changing internal and external conditions, and is evolutionary in nature. It would be incorrect to...structures appear to be in fair condition. In accordance with the Corps of Engineer’s evaluation guidelines, the size classification of this dam is

49 CFR 240.409 - Hearings.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Hearings. 240.409 Section 240.409 Transportation... Hearings. (a) An administrative hearing for a locomotive engineer qualification petition shall be conducted... conduct of the hearing for the purpose of achieving a prompt and fair determination of all material issues...

Science and Technology Peer Review: GPRA

DTIC Science & Technology

2003-11-30

attention they deserve. 12) Cost of S&T Evaluations The next critical factor for quality S&T evaluations is cost ( ASTEC , 1991; Buechner, 1974; Hensley...117-118. Armstrong, J.S. 1997. Why Conduct Journal Peer Review: Quality Control, Fairness, Or Innovation. Sci Engineer Ethics, 3:1. ASTEC . 1991

49 CFR 240.409 - Hearings.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Hearings. 240.409 Section 240.409 Transportation... Hearings. (a) An administrative hearing for a locomotive engineer qualification petition shall be conducted... conduct of the hearing for the purpose of achieving a prompt and fair determination of all material issues...

ANNUAL REPORT

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1959-07-01

The national laboratory concept, laboratory objectives, the staff, research facilities. research activities, and administration are discussed in general terms and a financial statement is given. Fairly detailed accounts are given for the research programs in the fields of physics, accelerator development, instrumentation, applied mathematics, chemistry, nuclear engineering, biology, and medicine. (W.D.M.)

Tests of Nacelle-Propeller Combinations in Various Positions with Reference to Wings II : Thick Wing - Various Radial-Engine Cowlings - Tractor Propeller

NASA Technical Reports Server (NTRS)

Wood, Donald H

1932-01-01

This report is the second of a series giving the results obtained in the 20-foot wind tunnel of the National Advisory Committee for Aeronautics on the interference drag and propulsive efficiency of nacelle-propeller-wing combinations. The first report gave the results of the test of a N.A.C.A. cowled air-cooled engine nacelle located in 21 positions with reference to a thick wing. The present report gives results of tests of a normal engine nacelle with several types of cowling and fairings in four of the positions with reference to the same wing. (author)

Chemistry and combustion of fit-for-purpose biofuels.

PubMed

Rothamer, David A; Donohue, Timothy J

2013-06-01

From the inception of internal combustion engines, biologically derived fuels (biofuels) have played a role. Nicolaus Otto ran a predecessor to today's spark-ignition engine with an ethanol fuel blend in 1860. At the 1900 Paris world's fair, Rudolf Diesel ran his engine on peanut oil. Over 100 years of petroleum production has led to consistency and reliability of engines that demand standardized fuels. New biofuels can displace petroleum-based fuels and produce positive impacts on the environment, the economy, and the use of local energy sources. This review discusses the combustion, performance and other requirements of biofuels that will impact their near-term and long-term ability to replace petroleum fuels in transportation applications. Copyright © 2013 Elsevier Ltd. All rights reserved.

Drag and Cooling with Various Forms of Cowling for a "Whirlwind" Radial Air-cooled Engine II

NASA Technical Reports Server (NTRS)

Weick, Fred E

1930-01-01

This report gives the results of the second portion of an investigation in the twenty-foot Propeller Research Tunnel of the National Advisory Committee for Aeronautics, on the cowling and cooling of a "Whirlwind" J-5 radial air-cooled engine. The first portion pertains to tests with a cabin fuselage. This report covers tests with several forms of cowling, including conventional types, individual fairings behind the cylinders, individual hoods over the over the cylinders, and the new N. A. C. A. complete cowling, all on an open cockpit fuselage. Drag tests were also made with a conventional engine nacelle, and with a nacelle having the new complete cowling. In the second part of the investigation the results found in the first part were substantiated. It was also found that the reduction in drag with the complete cowling over that with conventional cowling is greater with the smaller bodies than with the cabin fuselage; in fact, the gain in the case of the completely cowled nacelle is over twice that with the cabin fuselage. The individual fairings and hoods did not prove effective in reducing the drag. The results of flight tests on AT-5A airplane has been analyzed and found to agree very well with the results of the wind tunnel tests. (author)

2013 Awards Gala Event | NIH MedlinePlus the Magazine

MedlinePlus

... Dr. Roger I. Glass , M.D., Ph.D. (right), was Jack Andraka , 16 (middle), who recently won the 2012 Gordon E. Moore Award, grand prize of the Intel International Science and Engineering Fair. Andraka developed a quick and inexpensive method to identify pancreatic, ovarian, and lung cancer during ...

WHK Interns Win Big at Frederick County Science Fair | Poster

Cancer.gov

Three Werner H. Kirsten student interns claimed awards at the 35th Annual Frederick County Science and Engineering Fair—and got a shot at the national competition—for imaginative projects that reached out to the rings of Saturn and down to the details of advanced cancer diagnostics.

18 CFR 4.11 - Reports.

Code of Federal Regulations, 2014 CFR

2014-04-01

... PROJECT COSTS Determination of Fair Value of Constructed Projects, Under Section 23(a) of the Act § 4.11 Reports. Representatives of the Commission will inspect the project works, engineering reports, and other records of the project, check the inventory and make an appraisal of the property and an audit of the...

18 CFR 4.11 - Reports.

Code of Federal Regulations, 2011 CFR

2011-04-01

... PROJECT COSTS Determination of Fair Value of Constructed Projects, Under Section 23(a) of the Act § 4.11 Reports. Representatives of the Commission will inspect the project works, engineering reports, and other records of the project, check the inventory and make an appraisal of the property and an audit of the...

Increasing Student Participation in Science Fair Competitions

ERIC Educational Resources Information Center

Miles, Rhea

2012-01-01

In the summer of 2009, 22 African American middle school students in eastern North Carolina became participants in the Reach Up program to increase the number of underrepresented students participating in science-, technology-, engineering-, and mathematics-related activities. One of the goals of the program was for these students to participate…

A Science Fair Partnership: An Active Learning Experience for Teacher Candidates

ERIC Educational Resources Information Center

McCarthy, Deborah Louise

2015-01-01

STEM (science, technology, engineering, and mathematics) education is a national instructional priority. As part of Southeastern Louisiana University's STEM Outreach Initiative, funded by a Shell Oil Company Foundation grant to raise interest in STEM-related activities, teacher candidates were given the opportunity to leave their classroom to…

The Influence of Directed Air Flow on Combustion in Spark-Ignition Engine

NASA Technical Reports Server (NTRS)

Rothrock, A M; Spencer, R C

1939-01-01

The air movement within the cylinder of the NACA combustion apparatus was regulated by using shrouded inlet valves and by fairing the inlet passage. Rates of combustion were determined at different inlet-air velocities with the engine speed maintained constant and at different engine speeds with the inlet-air velocity maintained approximately constant. The rate of combustion increased when the engine speed was doubled without changing the inlet-air velocity; the observed increase was about the same as the increase in the rate of combustion obtained by doubling the inlet-air velocity without changing the engine speed. Certain types of directed air movement gave great improvement in the reproducibility of the explosions from cycle to cycle, provided that other variables were controlled. Directing the inlet air past the injection valve during injection increased the rate of burning.

Increasing Opportunities and Success in Science, Math, Engineering and Technology Through Partnerships and Resource Convergence

NASA Astrophysics Data System (ADS)

Huebner, P.

2003-12-01

Bridging the geographic boundaries and providing educational opportunities is the goal of American Indian Programs at Arizona State University East. Since its inception in 1997, American Indian Programs has established programs and partnerships to provide opportunities and resources to Tribal communities throughout Arizona. From educational programs to enhance student achievement at the K-12 level to recruitment and retention of American Indian students at the post secondary level, American Indian Programs provides the resources to further the success of students in science, math, engineering and technology. Resource convergence is critical in providing opportunities to ensure the success of Indian students in science, math, engineering and technology. American Indian Programs has built successful programs based on partnerships between federal grant programs, corporate, federal and state agencies. Providing professional development for teachers, school assessment, science and math curriculum and data collection are the primary efforts at the K-12 level to increase student achievement. Enrichment programs to enhance K-12 activities include the development of the Arizona American Indian Science and Engineering Fair (the only State fair for American Indiana's in the country) supported entirely through corporate support, summer residential programs, after school activities and dual enrollment programs for high school students. ASU East's retention rate for first year students is 92 percent and 1in 6 graduating students enter graduate programs. American Indian Programs strives to build student relationships with federal, state and corporate agencies through internships and coops. This effort has led to the development of an E-mentoring program that allows students (and K-12 teachers) to work directly with practicing scientists, and engineers in research activities. New programs look to increase technology not only in Tribal schools but increase technology in the homes of students as well.

CCD Astrometric Measurements of Double Stars BAL 746, BPM 342, KU 92, and STF 897

NASA Astrophysics Data System (ADS)

Smith, Schuyler

2017-07-01

Double stars WDS 06589-0106 (BAL 746), WDS 06579+1430 (BPM 342), WDS 07006+0921 (KU 92), and WDS 06224+2640 (STF 897) were measured as part of a science fair project for the 2016 Greater San Diego Science and Engineering Fair. The goal was to measure the separation and position angles of stars by using a telescope with a charge-coupled device (CCD) on the iTelescope network. Five images were taken of each of the stars. These images were plate solved with Visual PinPoint and measured using Aladin Sky Atlas. Measurements for all five doubles compare well to the more recent values in the Washington Double Star Catalog.

Deep Space 1 fairing arrives at pad 17A for launch

NASA Technical Reports Server (NTRS)

1998-01-01

The fairing for Deep Space 1 nears the top of the Mobile Service Tower before being attached to the Boeing Delta 7326 rocket that will launch on Oct. 15, 1998. The first flight in NASA's New Millennium Program, Deep Space 1 is designed to validate 12 new technologies for scientific space missions of the next century. Onboard experiments include an ion propulsion engine and software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. Deep Space 1 will complete most of its mission objectives within the first two months, but will also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999.

White House Maker Faire

NASA Image and Video Library

2014-06-18

The Made In Space company displays some of the tools that can be made by their 3D printer during the first ever White House Maker Faire which brings together students, entrepreneurs, and everyday citizens who are using new tools and techniques to launch new businesses, learn vital skills in science, technology, engineering, and math (STEM), and fuel the renaissance in American manufacturing, at the White House, Wednesday, June 18, 2014 in Washington. The Made In Space 3D printer was just approved by NASA to be tested onboard the International Space Station (ISS), and NASA announced a challenge for students to design items that would be printed by this first 3D printer to fly in space. Photo Credit: (NASA/Bill Ingalls)

White House Maker Faire

NASA Image and Video Library

2014-06-18

A prototype model of the Made In Space 3D printer is on display during the first ever White House Maker Faire which brings together students, entrepreneurs, and everyday citizens who are using new tools and techniques to launch new businesses, learn vital skills in science, technology, engineering, and math (STEM), and fuel the renaissance in American manufacturing, at the White House, Wednesday, June 18, 2014 in Washington. The Made In Space 3D printer was just approved by NASA to be tested onboard the International Space Station (ISS), and NASA announced a challenge for students to design items that would be printed by this first 3D printer to fly in space. Photo Credit: (NASA/Bill Ingalls)

Lac Courte Oreilles Hydro Dam Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weaver, Jason; Meyers, Amy

The main objective of this project was to investigate upgrading the existing hydro power generating system at the Winter Dam. The tribe would like to produce more energy and receive a fair market power purchase agreement so the dam is no longer a drain on our budget but a contributor to our economy. We contracted Kiser Hydro, LLC Engineering for this project and received an engineering report that includes options for producing more energy with cost effective upgrades to the existing turbines. Included in this project was a negotiation of energy price sales negotiations.

Kinetic resolution and stereoselective synthesis of 3-substituted aspartic acids by using engineered methylaspartate ammonia lyases.

PubMed

Raj, Hans; Szymanski, Wiktor; de Villiers, Jandré; Puthan Veetil, Vinod; Quax, Wim J; Shimamoto, Keiko; Janssen, Dick B; Feringa, Ben L; Poelarends, Gerrit J

2013-08-19

Enzymatic amino acid synthesis: Kinetic resolution and asymmetric synthesis of various valuable 3-substituted aspartic acids, which were obtained in fair to good yields with diastereomeric ratio values of up to >98:2 and enantiomeric excess values of up to >99 %, by using engineered methylaspartate ammonia lyases are described. These biocatalytic methodologies for the selective preparation of aspartic acid derivatives appear to be attractive alternatives for existing chemical methods. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Correction of Temperatures of Air-Cooled Engine Cylinders for Variation in Engine and Cooling Conditions

NASA Technical Reports Server (NTRS)

Schey, Oscar W; Pinkel, Benjamin; Ellerbrock, Herman H , Jr

1939-01-01

Factors are obtained from semiempirical equations for correcting engine-cylinder temperatures for variation in important engine and cooling conditions. The variation of engine temperatures with atmospheric temperature is treated in detail, and correction factors are obtained for various flight and test conditions, such as climb at constant indicated air speed, level flight, ground running, take-off, constant speed of cooling air, and constant mass flow of cooling air. Seven conventional air-cooled engine cylinders enclosed in jackets and cooled by a blower were tested to determine the effect of cooling-air temperature and carburetor-air temperature on cylinder temperatures. The cooling air temperature was varied from approximately 80 degrees F. to 230 degrees F. and the carburetor-air temperature from approximately 40 degrees F. to 160 degrees F. Tests were made over a large range of engine speeds, brake mean effective pressures, and pressure drops across the cylinder. The correction factors obtained experimentally are compared with those obtained from the semiempirical equations and a fair agreement is noted.

29 CFR 793.4 - General requirements for exemption.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AND TELEVISION STATION EMPLOYEES FROM OVERTIME PAY REQUIREMENTS UNDER SECTION 13(b)(9) OF THE FAIR... employee must be “employed as” an announcer, or a news editor, or a chief engineer. (b) The employee must be employed “by” a radio or television station. (c) The major studio of such radio or television...

46 CFR 167.45-45 - Carbon dioxide fire-extinguishing system requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SCHOOLS PUBLIC NAUTICAL SCHOOL SHIPS Special Firefighting and Fire Prevention Requirements § 167.45-45... school ship propelled by internal combustion engines, the quantity of carbon dioxide required may be... arrangement of the piping shall be such as to give a general and fairly uniform distribution over the entire...

46 CFR 167.45-45 - Carbon dioxide fire-extinguishing system requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... SCHOOLS PUBLIC NAUTICAL SCHOOL SHIPS Special Firefighting and Fire Prevention Requirements § 167.45-45... school ship propelled by internal combustion engines, the quantity of carbon dioxide required may be... arrangement of the piping shall be such as to give a general and fairly uniform distribution over the entire...

Park Forest Middle School STEM Education Fair 2010

ERIC Educational Resources Information Center

Hughes, Bill

2010-01-01

Innovations from the United States have often led the world to new discoveries and solutions to complex problems. However, there are alarming indications that the United States is falling behind other countries in the ability to apply science, technology, engineering, and math to complex problems facing our world. In order for the country to…

The Gender and Science Digital Library: Affecting Student Achievement in Science.

ERIC Educational Resources Information Center

Nair, Sarita

2003-01-01

Describes the Gender and Science Digital Library (GSDL), an online collection of high-quality, interactive science resources that are gender-fair, inclusive, and engaging to students. Considers use by teachers and school library media specialists to encourage girls to enter careers in science, technology, engineering, and math (STEM). (LRW)

Marketing: A Fair Opportunity for Promoting Information Literacy

ERIC Educational Resources Information Center

Germain, Carol Anne

2007-01-01

Some faculty and administrators naively believe that undergraduates come to campus as information literate individuals since these students know how to use computers and the Internet. Yet, as librarians, they know that there is more to IL than surfing search engines, IMing, and word processing. So marketing IL becomes a very important task. This…

STEM Clubs and Science Fair Competitions: Effects on Post-Secondary Matriculation

ERIC Educational Resources Information Center

Sahin, Alpaslan

2013-01-01

As the global economic competition gets tougher, American policymakers and researchers are interested in finding ways to increase the number of students pursuing STEM (Science, Technology, Engineering, and Mathematics)-related majors in order for the United States to continue its role as an economic powerhouse. A survey study was employed to…

KSC-99pp1232

NASA Image and Video Library

1999-10-20

Center Director Roy Bridges stops to pet one of the dogs that serves with Canine Companions for Independence, a vendor displaying its capabilities at the Disability Awareness and Action Working Group (DAAWG) 1999 Technology Fair being held Oct. 20-21 at Kennedy Space Center. Standing at the right is Carol Cavanaugh, with KSC Public Services; behind Bridges is Nancie Strott (left), a multi-media specialist with Dynacs and chairperson of the Fair, and Sterling Walker (right), director of Engineering Development and chairman of DAAWG. The Fair is highlighting vendors demonstrating mobility, hearing, vision and silent disability assistive technology. The purpose is to create an awareness of the types of technology currently available to assist people with various disabilities in the workplace. The theme is that of this year's National Disability Employment Awareness Month, "Opening Doors to Ability." Some of the other vendors participating are Goodwill Industries, Accessible Structures, Division of Blind Services, Space Coast Center for Independent Living, KSC Fitness Center and Delaware North Parks Services

General Aviation Light Aircraft Propulsion: From the 1940's to the Next Century

NASA Technical Reports Server (NTRS)

Burkardt, Leo A.

1998-01-01

Current general aviation light aircraft are powered by engines that were originally designed in the 1940's. This paper gives a brief history of light aircraft engine development, explaining why the air-cooled, horizontally opposed piston engine became the dominant engine for this class of aircraft. Current engines are fairly efficient, and their designs have been updated through the years, but their basic design and operational characteristics are archaic in comparison to modem engine designs, such as those used in the automotive industry. There have been some innovative engine developments, but in general they have not been commercially successful. This paper gives some insight into the reasons for this lack of success. There is now renewed interest in developing modem propulsion systems for light aircraft, in the fore-front of which is NASA's General Aviation Propulsion (GAP) program. This paper gives an overview of the engines being developed in the GAP program, what they will mean to the general aviation community, and why NASA and its industry partners believe that these new engine developments will bring about a new era in general aviation light aircraft.

UCS-PROMOVE: The engineer of the future

NASA Astrophysics Data System (ADS)

Villas-Boas, V.

2010-06-01

The Universidade de Caxias do Sul (UCS) elaborated the cooperative project called 'The engineer of the future', with the objective of promoting science and engineering among high school teachers and students. This project aims to improve the quality of the teaching and to increase the interest of students in technological areas, leading to a future career in engineering. The activities of this project were planned to give meaning and foundation to the teaching-learning process of science and for the application of theory in the solution of real problems, while articulating scientific, economic, environmental, social and political aspects and also to reinforce the important role of engineering in society. Amongst the activities to be offered to high school teachers and students are a specialisation course for teachers based upon new educational methodologies, workshops in different areas of science and technology, a programme entitled 'Encouraging girls in technology, science and engineering', science fairs and visits to the industries of the region. Activities with the engineering instructors of UCS are also being developed in order to help them to incorporate in their classes more effective pedagogical strategies for educating the engineer-to-be.

Unconscious Bias in the Classroom: Evidence and Opportunities, 2017

ERIC Educational Resources Information Center

Dee, T.; Gershenson, S.

2017-01-01

The underrepresentation of women and racial and ethnic minorities in computer science (CS) and other fields of science, technology, engineering, and math (STEM) is a serious impediment to technological innovation as well as an affront to fundamental notions of fairness and equity. These gaps emerge in the early grades and tend to persist, if not…

Soil Texture Estimates: A Tool to Compare Texture-by-Feel and Lab Data

ERIC Educational Resources Information Center

Franzmeier, D.P.; Owens, P.R.

2008-01-01

Soil texture is a fundamental soil property that impacts agricultural and engineering land-use. Comparing texture estimates-by-feel to laboratory-known values to calibrate fingers is a common practice. As educators, it is difficult to assess this field skill consistently and fairly. The instructor may give full credit for the correct texture class…

Experimental Altitude Performance of JP-4 Fuel and Liquid-Oxygen Rocket Engine with an Area Ratio of 48

NASA Technical Reports Server (NTRS)

Fortini, Anthony; Hendrix, Charles D.; Huff, Vearl N.

1959-01-01

The performance for four altitudes (sea-level, 51,000, 65,000, and 70,000 ft) of a rocket engine having a nozzle area ratio of 48.39 and using JP-4 fuel and liquid oxygen as a propellant was evaluated experimentally by use of a 1000-pound-thrust engine operating at a chamber pressure of 600 pounds per square inch absolute. The altitude environment was obtained by a rocket-ejector system which utilized the rocket exhaust gases as the pumping fluid of the ejector. Also, an engine having a nozzle area ratio of 5.49 designed for sea level was tested at sea-level conditions. The following table lists values from faired experimental curves at an oxidant-fuel ratio of 2.3 for various approximate altitudes.

Deep Space 1 fairing arrives at pad 17A for launch

NASA Technical Reports Server (NTRS)

1998-01-01

The fairing for Deep Space 1 is raised upright before being lifted on the Mobile Service Tower to its place on the Boeing Delta 7326 rocket that will launch on Oct. 15, 1998. The first flight in NASA's New Millennium Program, Deep Space 1 is designed to validate 12 new technologies for scientific space missions of the next century. Onboard experiments include an ion propulsion engine and software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. Deep Space 1 will complete most of its mission objectives within the first two months, but will also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999.

Flight service evaluation of Kevlar-49/epoxy composite panels in wide-bodied commercial transport aircraft

NASA Technical Reports Server (NTRS)

Stone, R. H.

1975-01-01

Kevlar-49 fairing panels were inspected and found to be performing satisfactorily after two years flight service on an Eastern and an Air Canada L-1011. Six panels are on each aircraft including sandwich and solid laminate wing-body panels, and 300 F service aft engine fairings. Some of the panels were removed from the aircraft to permit inspection of inner surfaces and fastener hole conditions. Minor defects such as surface cracks due to impact damage, small delaminated areas, elongation and fraying of fastener holes, were noted. None of these defects were considered serious enough to warrant corrective action in the opinion of airline personnel. The defects are typical for the most part of defects noted on similar fiberglass parts.

Deep Space 1 fairing arrives at pad 17A for launch

NASA Technical Reports Server (NTRS)

1998-01-01

Workers watch as the fairing for Deep Space 1 is lifted on the Mobile Service Tower to its place on the Boeing Delta 7326 rocket that will launch on Oct. 15, 1998. The first flight in NASA's New Millennium Program, Deep Space 1 is designed to validate 12 new technologies for scientific space missions of the next century. Onboard experiments include an ion propulsion engine and software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. Deep Space 1 will complete most of its mission objectives within the first two months, but will also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999.

White House Maker Faire

NASA Image and Video Library

2014-06-18

Sara Ann Wylie of Public Lab shows the do to yourself Balloon Mapping Kit, during the first ever White House Maker Faire, which brings together students, entrepreneurs, and everyday citizens who are using new tools and techniques to launch new businesses, learn vital skills in science, technology, engineering, and math (STEM), and fuel the renaissance in American manufacturing, at the White House, Wednesday, June 18, 2014 in Washington. The Balloon Mapping Kit enables you to take your own aerial photos from 1000 ft or higher. The President announced new steps the Administration and its partners are taking to support the ability of more Americans, young and old, to have to access to these tools and techniques and brings their ideas to life. Photo Credit: (NASA/Bill Ingalls)

Deep Space 1 fairing arrives at pad 17A for launch

NASA Technical Reports Server (NTRS)

1998-01-01

Workers check the position of the fairing for Deep Space 1 as it reaches the top of the Mobile Service Tower where it will be attached to the Boeing Delta 7326 rocket that will launch on Oct. 15, 1998. The first flight in NASA's New Millennium Program, Deep Space 1 is designed to validate 12 new technologies for scientific space missions of the next century. Onboard experiments include an ion propulsion engine and software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. Deep Space 1 will complete most of its mission objectives within the first two months, but will also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999.

Cold-air performance of compressor-drive turbine of Department of Energy upgraded automobile gas turbine engine. 2: Stage performance

NASA Technical Reports Server (NTRS)

Roelke, R. J.; Haas, J. E.

1982-01-01

The aerodynamic performance of the compressor-drive turbine of the DOE upgraded gas turbine engine was determined in low temperature air. The as-received cast rotor blading had a significantly thicker profile than design and a fairly rough surface finish. Because of these blading imperfections a series of stage tests with modified rotors were made. These included the as-cast rotor, a reduced-roughness rotor, and a rotor with blades thinned to near design. Significant performance changes were measured. Tests were also made to determine the effect of Reynolds number on the turbine performance. Comparisons are made between this turbine and the compressor-drive turbine of the DOE baseline gas turbine engine.

Combined heat and power supply using Carnot engines

NASA Astrophysics Data System (ADS)

Horlock, J. H.

The Marshall Report on the thermodynamic and economic feasibility of introducing large scale combined heat and electrical power generation (CHP) into the United Kingdom is summarized. Combinations of reversible power plant (Carnot engines) to meet a given demand of power and heat production are analyzed. The Marshall Report states that fairly large scale CHP plants are an attractive energy saving option for areas of high heat load densities. Analysis shows that for given requirements, the total heat supply and utilization factor are functions of heat output, reservoir supply temperature, temperature of heat rejected to the reservoir, and an intermediate temperature for district heating.

"Their Objection Was that if I Got the Job, I Might Actually Do It"

ERIC Educational Resources Information Center

Stanistreet, Paul

2012-01-01

Les Ebdon, the new Director of the Office for Fair Access, faced a campaign of vilification from the press. Ebdon, a prize-winning chemist who was, until recently, Vice Chancellor of the University of Bedfordshire and Chair of the new universities group Million+, was called, among other things, a "social engineer," a "friend of the…

Alternative Fuels Data Center: ampCNG Puts Conventional Fuels Out to

Science.gov Websites

; Steve Josephs, co-founder and director of engineering at ampCNG, Chicago, Illinois When ampCNG isn't the process. ampCNG's Cow-Powered Trucks ampCNG, a CNG station developer based in Chicago, Illinois interest in using more sustainable forms of fuel began in 2010, when the company partnered with Fair Oaks

Social scientist's viewpoint on conflict management

USGS Publications Warehouse

Ertel, Madge O.

1990-01-01

Social scientists can bring to the conflict-management process objective, reliable information needed to resolve increasingly complex issues. Engineers need basic training in the principles of the social sciences and in strategies for public involvement. All scientists need to be sure that that the information they provide is unbiased by their own value judgments and that fair standards and open procedures govern its use.

Implementation and Outcomes of Online Self and Peer Assessment on Group Based Honours Research Projects

ERIC Educational Resources Information Center

Wu, Chengqing; Chanda, Emmanuel; Willison, John

2014-01-01

Honours research projects in the School of Civil, Environmental and Mining Engineering at the University of Adelaide are run with small groups of students working with an academic supervisor in a chosen area for one year. The research project is mainly self-directed study, which makes it very difficult to fairly assess the contribution of…

Replacing Property Taxes with Sales Taxes Is the Wrong Answer for Texas Families and Public Schools

ERIC Educational Resources Information Center

Center for Public Policy Priorities, 2012

2012-01-01

Public education is the foundation of our democracy and the engine of our economy, and Texans have a collective responsibility to ensure that public education is adequately supported. This responsibility needs to be fairly distributed among Texas families in a way that supports economic growth. Recently, some have proposed that Texas replace local…

The Threat of Sexism in a STEM Educational Setting: The Moderating Impacts of Ethnicity and Legitimacy Beliefs on Test Performance

ERIC Educational Resources Information Center

O'Brien, Laurie T.; Garcia, Donna M.; Adams, Glenn; Villalobos, J. Guillermo; Hammer, Elliott; Gilbert, Patricia

2015-01-01

Social identity threat has negative consequences for women in science, technology, engineering, and mathematics (STEM) fields. The present study examined whether legitimacy beliefs--beliefs that status differences between men and women in STEM fields are fair--put women at risk for experiencing social identity threat and poorer performance on a…

Hypersonic Technology Developments with EU Co-Funded Projects

DTIC Science & Technology

2010-09-01

metal or even high performance alloys . The hollow sphere technology allows high degrees of porosities, reproducible properties and fair process control...sandwich structure configuration will be investigated. Titanium alloys and Ti-aluminides exhibit excellent mechanical properties for applications where...cooling techniques, new alloys , improved thermodynamic cycles by increased pressure ratios and TIT, etc… As the Olympus 593 engine was based on the

Preliminary model for high-power-waveguide arcing and arc protection

NASA Technical Reports Server (NTRS)

Yen, H. C.

1978-01-01

The arc protection subsystems that are implemented in the DSN high power transmitters are discussed. The status of present knowledge about waveguide arcs is reviewed in terms of a simple engineering model. A fairly general arc detection scheme is also discussed. Areas where further studies are needed are pointed out along with proposed approaches to the solutions of these problems.

Initial Assessment of Acoustic Source Visibility with a 24-Element Microphone Array in the Arnold Engineering Development Center 80- by 120-Foot Wind Tunnel at NASA Ames Research Center

NASA Technical Reports Server (NTRS)

Horne, William C.

2011-01-01

Measurements of background noise were recently obtained with a 24-element phased microphone array in the test section of the Arnold Engineering Development Center 80- by120-Foot Wind Tunnel at speeds of 50 to 100 knots (27.5 to 51.4 m/s). The array was mounted in an aerodynamic fairing positioned with array center 1.2m from the floor and 16 m from the tunnel centerline, The array plate was mounted flush with the fairing surface as well as recessed in. (1.27 cm) behind a porous Kevlar screen. Wind-off speaker measurements were also acquired every 15 on a 10 m semicircular arc to assess directional resolution of the array with various processing algorithms, and to estimate minimum detectable source strengths for future wind tunnel aeroacoustic studies. The dominant background noise of the facility is from the six drive fans downstream of the test section and first set of turning vanes. Directional array response and processing methods such as background-noise cross-spectral-matrix subtraction suggest that sources 10-15 dB weaker than the background can be detected.

An Engineering Design Reference Mission for a Future Large-Aperture UVOIR Space Observatory

NASA Astrophysics Data System (ADS)

Thronson, Harley A.; Bolcar, Matthew R.; Clampin, Mark; Crooke, Julie A.; Redding, David; Rioux, Norman; Stahl, H. Philip

2016-01-01

From the 2010 NRC Decadal Survey and the NASA Thirty-Year Roadmap, Enduring Quests, Daring Visions, to the recent AURA report, From Cosmic Birth to Living Earths, multiple community assessments have recommended development of a large-aperture UVOIR space observatory capable of achieving a broad range of compelling scientific goals. Of these priority science goals, the most technically challenging is the search for spectroscopic biomarkers in the atmospheres of exoplanets in the solar neighborhood. Here we present an engineering design reference mission (EDRM) for the Advanced Technology Large-Aperture Space Telescope (ATLAST), which was conceived from the start as capable of breakthrough science paired with an emphasis on cost control and cost effectiveness. An EDRM allows the engineering design trade space to be explored in depth to determine what are the most demanding requirements and where there are opportunities for margin against requirements. Our joint NASA GSFC/JPL/MSFC/STScI study team has used community-provided science goals to derive mission needs, requirements, and candidate mission architectures for a future large-aperture, non-cryogenic UVOIR space observatory. The ATLAST observatory is designed to operate at a Sun-Earth L2 orbit, which provides a stable thermal environment and excellent field of regard. Our reference designs have emphasized a serviceable 36-segment 9.2 m aperture telescope that stows within a five-meter diameter launch vehicle fairing. As part of our cost-management effort, this particular reference mission builds upon the engineering design for JWST. Moreover, it is scalable to a variety of launch vehicle fairings. Performance needs developed under the study are traceable to a variety of additional reference designs, including options for a monolithic primary mirror.

Merging science, engineering, and data with FUN: Recreational Drones in STEaM Education Activities and Science Fair Projects

NASA Astrophysics Data System (ADS)

Olds, S. E.; Mooney, M. E.; Dahlman, L. E.

2016-12-01

Recreational drones, also known as unmanned aerial vehicles (UAVs), provide an ideal platform for engaging students in science, technology, engineering, and math (STEM) investigations for science fair projects, after-school clubs, and in-class activities. UAVs are very popular (estimate of >1 million received as gifts this past year), relatively inexpensive (<$100), weigh less than 250g (don't require FAA registration), are modifiable, and can carry small instrument packages. Seeing the world from above can stimulate curiosity and give students a reason to engage in the Next Generation Science Standards (NGSS) process of science and engineering practices by designing and carrying out their own investigations. Using drones to facilitate experiments, students also participate in engineering design: they may choose off-the-shelf sensors or build DIY sensors to carry on their UAVs. Leveraging the learning potential of UAVs, the Federation of Earth Science Information Partners (ESIP) Education Committee has been developing an e-book of learning activities and investigation suggestions for secondary education students. The freely available download incorporates UAV civility and safety through a pre-flight checklist and flying guidelines, suggests science and flight team roles, and advocates robust data and metadata-collection practices. The ESIP team also worked with an engineer to build a 33-gram prototype environmental logger called SABEL (Shelley (Olds) and Bob's Environmental Logger). SABEL collects temperature, humidity, and GPS position assembled on an Arduino board. This presentation will elaborate upon the year-long process of working with educators via webinars and a 1-day workshop at the 2016 ESIP summer meeting and beyond. It will also provide examples of student-led investigations, instructions for building the SABEL sensor package, insights gleaned from workshop feedback - and - the status of the new e-book compilation of student-focused activities using recreational drones to pursue STEM investigations!

Evaluation of FCS self and peer-assessment approach based on Cooperative and Engineering Design learning.

PubMed

Cvetkovic, Dean

2013-01-01

The Cooperative Learning in Engineering Design curriculum can be enhanced with structured and timely self and peer assessment teaching methodologies which can easily be applied to any Biomedical Engineering curriculum. A study was designed and implemented to evaluate the effectiveness of this structured and timely self and peer assessment on student team-based projects. In comparing the 'peer-blind' and 'face-to-face' Fair Contribution Scoring (FCS) methods, both had advantages and disadvantages. The 'peer-blind' self and peer assessment method would cause high discrepancy between self and team ratings. But the 'face-to-face' method on the other hand did not have the discrepancy issue and had actually proved to be a more accurate and effective, indicating team cohesiveness and good cooperative learning.

Exhaust-stack nozzle area and shape for individual cylinder exhaust-gas jet-propulsion system

NASA Technical Reports Server (NTRS)

Pinkel, Benjamin; Turner, Richard; Voss, Fred; Humble, Leroy V

1943-01-01

This report presents the results of an investigation conducted on the effect of exhaust-stack nozzle area, shape, and length on engine power, jet thrust, and gain in net thrust (engine propeller plus jet). Single-cylinder engine data were obtained using three straight stacks 25, 44, and 108 inches in length; an S-shaped stack, a 90 degree bend, a 180 degree bend, and a short straight stack having a closed branch faired into it. Each stack was fitted with nozzles varying in exit area from 0.91 square inch to the unrestricted area of the stack of 4.20 square inches. The engine was generally operated over a range of engine speeds from 1300 to 2100 r.p.m, inlet-manifold pressures from 22 to 30 inches of mercury absolute, and a fuel-air ratio of 0.08. The loss in engine power, the jet thrust, and the gain in net thrust are correlated in terms of several simple parameters. An example is given for determining the optimum nozzle area and the overall net thrust.

Software engineering

NASA Technical Reports Server (NTRS)

Fridge, Ernest M., III; Hiott, Jim; Golej, Jim; Plumb, Allan

1993-01-01

Today's software systems generally use obsolete technology, are not integrated properly with other software systems, and are difficult and costly to maintain. The discipline of reverse engineering is becoming prominent as organizations try to move their systems up to more modern and maintainable technology in a cost effective manner. The Johnson Space Center (JSC) created a significant set of tools to develop and maintain FORTRAN and C code during development of the space shuttle. This tool set forms the basis for an integrated environment to reengineer existing code into modern software engineering structures which are then easier and less costly to maintain and which allow a fairly straightforward translation into other target languages. The environment will support these structures and practices even in areas where the language definition and compilers do not enforce good software engineering. The knowledge and data captured using the reverse engineering tools is passed to standard forward engineering tools to redesign or perform major upgrades to software systems in a much more cost effective manner than using older technologies. The latest release of the environment was in Feb. 1992.

Prediction of Landing Gear Noise Reduction and Comparison to Measurements

NASA Technical Reports Server (NTRS)

Lopes, Leonard V.

2010-01-01

Noise continues to be an ongoing problem for existing aircraft in flight and is projected to be a concern for next generation designs. During landing, when the engines are operating at reduced power, the noise from the airframe, of which landing gear noise is an important part, is equal to the engine noise. There are several methods of predicting landing gear noise, but none have been applied to predict the change in noise due to a change in landing gear design. The current effort uses the Landing Gear Model and Acoustic Prediction (LGMAP) code, developed at The Pennsylvania State University to predict the noise from landing gear. These predictions include the influence of noise reduction concepts on the landing gear noise. LGMAP is compared to wind tunnel experiments of a 6.3%-scale Boeing 777 main gear performed in the Quiet Flow Facility (QFF) at NASA Langley. The geometries tested in the QFF include the landing gear with and without a toboggan fairing and the door. It is shown that LGMAP is able to predict the noise directives and spectra from the model-scale test for the baseline configuration as accurately as current gear prediction methods. However, LGMAP is also able to predict the difference in noise caused by the toboggan fairing and by removing the landing gear door. LGMAP is also compared to far-field ground-based flush-mounted microphone measurements from the 2005 Quiet Technology Demonstrator 2 (QTD 2) flight test. These comparisons include a Boeing 777-300ER with and without a toboggan fairing that demonstrate that LGMAP can be applied to full-scale flyover measurements. LGMAP predictions of the noise generated by the nose gear on the main gear measurements are also shown.

Investigation of installation effects of single-engine convergent-divergent nozzles

NASA Technical Reports Server (NTRS)

Burley, J. R., II; Berrier, B. L.

1982-01-01

An investigation was conducted in the Langley 16-Foot Transonic Tunnel to determine installation effects on single-engine convergent-divergent nozzles applicable to reduced-power supersonic cruise aircraft. Tests were conducted at Mach numbers from 0.50 to 1.20, at angles of attack from -3 degrees to 9 degrees, and at nozzle pressure ratios from 1.0 (jet off) to 8.0. The effects of empennage arrangement, nozzle length, a cusp fairing, and afterbody closure on total aft-end drag coefficient and component drag coefficients were investigated. Basic lift- and drag-coefficient data and external static-pressure distributions on the nozzle and afterbody are presented and discussed.

Comparison of theoretically predicted lateral-directional aerodynamic characteristics with full-scale wind tunnel data on the ATLIT airplane

NASA Technical Reports Server (NTRS)

Griswold, M.; Roskam, J.

1980-01-01

An analytical method is presented for predicting lateral-directional aerodynamic characteristics of light twin engine propeller-driven airplanes. This method is applied to the Advanced Technology Light Twin Engine airplane. The calculated characteristics are correlated against full-scale wind tunnel data. The method predicts the sideslip derivatives fairly well, although angle of attack variations are not well predicted. Spoiler performance was predicted somewhat high but was still reasonable. The rudder derivatives were not well predicted, in particular the effect of angle of attack. The predicted dynamic derivatives could not be correlated due to lack of experimental data.

Near East/South Asia Report

DTIC Science & Technology

1985-04-05

the air defense system Amon, a system which the. Contraves company developed by means of the Skyguard system on the basia of specifications engineers...of the Contraves Company and the Arab Industrialization Authority exhibits, displayed a group of armored vehicles, military transport vehicles...the most up-to-date kind, constituting a fair in itself. Take the Contraves Company, for example, which exhibited the latest aerial defense material

Obama Reiterates Strong Support for Science at Two Recent Appearances

NASA Astrophysics Data System (ADS)

Showstack, Randy

2013-05-01

President Barack Obama expressed his continued strong support for science and technology in remarks at the U.S. National Academy of Sciences (NAS) on 29 April. His call for continued funding, for scientific integrity, and for an "all-hands-on-deck" approach to science, technology, engineering, and mathematics (STEM) followed remarks he made a week earlier at the White House Science Fair.

Replacing Property Taxes with Sales Taxes Would Be Bad for Texas Businesses, Families, and Public Education. Policy Page. No. 07-307

ERIC Educational Resources Information Center

Center for Public Policy Priorities, 2007

2007-01-01

Public education is the foundation of our democracy and the engine of our economy. Texans have a collective responsibility to ensure that public education is adequately supported. This responsibility needs to be fairly distributed among Texas families in a way that supports economic growth. Recently, some have proposed that Texas replace local…

Perspective: The Stealth of Implicit Bias in Chemical Engineering Education, Its Threat to Diversity, and What Professors Can Do to Promote an Inclusive Future

ERIC Educational Resources Information Center

Farrell, Stephanie; Minerick, Adrienne R.

2018-01-01

Many educators hold fairness and egalitarianism as core values that they strive to uphold in their professional work and personal lives, and they hope that they evaluate and support students based strictly on student potential and achievement. However, everyone holds unconscious beliefs about social and identity groups. This implicit (unconscious)…

Enhancing Project-Based Learning through Student and Industry Engagement in a Video-Augmented 3-D Virtual Trade Fair

ERIC Educational Resources Information Center

Lee, Mark J. W.; Nikolic, Sasha; Vial, Peter J.; Ritz, Christian H.; Li, Wanqing; Goldfinch, Tom

2016-01-01

Project-based learning is a widely used pedagogical strategy in engineering education shown to be effective in fostering problem-solving, design, and teamwork skills. There are distinct benefits to be gained from giving students autonomy in determining the nature and scope of the projects that they wish to undertake, but a lack of expert guidance…

Software reengineering

NASA Technical Reports Server (NTRS)

Fridge, Ernest M., III

1991-01-01

Today's software systems generally use obsolete technology, are not integrated properly with other software systems, and are difficult and costly to maintain. The discipline of reverse engineering is becoming prominent as organizations try to move their systems up to more modern and maintainable technology in a cost effective manner. JSC created a significant set of tools to develop and maintain FORTRAN and C code during development of the Space Shuttle. This tool set forms the basis for an integrated environment to re-engineer existing code into modern software engineering structures which are then easier and less costly to maintain and which allow a fairly straightforward translation into other target languages. The environment will support these structures and practices even in areas where the language definition and compilers do not enforce good software engineering. The knowledge and data captured using the reverse engineering tools is passed to standard forward engineering tools to redesign or perform major upgrades to software systems in a much more cost effective manner than using older technologies. A beta vision of the environment was released in Mar. 1991. The commercial potential for such re-engineering tools is very great. CASE TRENDS magazine reported it to be the primary concern of over four hundred of the top MIS executives.

KSC-2013-3866

NASA Image and Video Library

2013-11-06

CAPE CANAVERAL, Fla. – Engineers and technicians move NASA's MAVEN spacecraft, inside payload fairing inside the Payload Hazardous Servicing Facility, or PHSF, into the airlock for mounting to a trailer for transport to Space Launch Complex 41 where it will be hoisted atop a United Launch Alliance Atlas V rocket that will lift it into space and on to Mars. MAVEN is short for Mars Atmosphere and Volatile Evolution. Photo credit: NASA/Kim Shiflett

KSC-2013-3867

NASA Image and Video Library

2013-11-06

CAPE CANAVERAL, Fla. – Engineers and technicians move NASA's MAVEN spacecraft, inside payload fairing inside the Payload Hazardous Servicing Facility, or PHSF, into the airlock for mounting to a trailer for transport to Space Launch Complex 41 where it will be hoisted atop a United Launch Alliance Atlas V rocket that will lift it into space and on to Mars. MAVEN is short for Mars Atmosphere and Volatile Evolution. Photo credit: NASA/Kim Shiflett

KSC-2013-3864

NASA Image and Video Library

2013-11-06

CAPE CANAVERAL, Fla. – Engineers and technicians move NASA's MAVEN spacecraft, inside payload fairing inside the Payload Hazardous Servicing Facility, or PHSF, into the airlock for mounting to a trailer for transport to Space Launch Complex 41 where it will be hoisted atop a United Launch Alliance Atlas V rocket that will lift it into space and on to Mars. MAVEN is short for Mars Atmosphere and Volatile Evolution. Photo credit: NASA/Kim Shiflett

KSC-2013-3865

NASA Image and Video Library

2013-11-06

CAPE CANAVERAL, Fla. – Engineers and technicians move NASA's MAVEN spacecraft, inside payload fairing inside the Payload Hazardous Servicing Facility, or PHSF, into the airlock for mounting to a trailer for transport to Space Launch Complex 41 where it will be hoisted atop a United Launch Alliance Atlas V rocket that will lift it into space and on to Mars. MAVEN is short for Mars Atmosphere and Volatile Evolution. Photo credit: NASA/Kim Shiflett

Summer Institute in Engineering and Computer Applications: Learning Through Experience

NASA Technical Reports Server (NTRS)

Langdon, Joan S.

1995-01-01

The document describing the Summer Institute project is made up of the following information: Administrative procedures; Seminars/Special Courses/Tours/College fair; Facilities/ Transportation; Staff and Administration; Collaboration; Participant/Project monitoring and evaluation; Fiscal and developmental activities; Job readiness/Job internship development and placement; and Student Follow-up/Tracking. Appendices include presentations, self-evaluations; abstracts and papers developed by the students during their participation in the program.

The Effect of Perceived Privacy Breaches on Continued Technology Use and Individual Psychology: The Construct, Instrument Development, and an Application Using Internet Search Engines

ERIC Educational Resources Information Center

Ahmad, Altaf

2010-01-01

This dissertation involved the development of a new construct, perceived privacy breach (PPB), to evaluate how a person perceives breaches of privacy in terms of whether they perceive any exchange of information was fair or not and how they believe it will impact people whose information has been shared. . This instrument assists researchers to…

Obama Announces Science Education Goal at White House Science Fair

NASA Astrophysics Data System (ADS)

Showstack, Randy

2012-02-01

With student participants in the second annual White House Science Fair as a backdrop, President Barack Obama announced on 7 February programs to help prepare new math and science teachers and to meet a new goal of having 1 million more U.S. college graduates in science, technology, engineering, and math (STEM) over the next decade than there would be at the current graduation rate. That goal is outlined in a report entitled “Engage to excel,” by the President's Council of Advisors on Science and Technology (PCAST), released the same day. Obama also announced several other initiatives, including a $22 million private-sector investment, led by the Carnegie Corporation of New York, to invest in STEM teacher training. After he toured the science fair projects, Obama said the science fair students “inspire” him. “What impresses me so much is not just how smart you are, but it's the fact that you recognize you've got a responsibility to use your talents in service of something bigger than yourselves,” he said. What these young people are doing is “going to make a bigger difference in the life of our country over the long term than just about anything,” adding, “We've got to emphasize how important this is and recognize these incredible young people who are doing that that I couldn't even imagine thinking about at fifth grade or eighth grade or in high school.”

Genetically modified luminescent bacteria Ralostonia solanacerum, Pseudomonas syringae, Pseudomonas savastanoi, and wild type bacterium Vibrio fischeri in biosynthesis of gold nanoparticles from gold chloride trihydrate.

PubMed

Attaran, Neda; Eshghi, Hossein; Rahimizadeh, Mohammad; Mashreghi, Mansour; Bakavoli, Mehdi

2014-08-04

The effect of different genetically engineered bacteria, Pseudomonas syringae, Pseudomonas savastanoi, and Ralostonia solanacerum and also a natural marine bacterial species, Vibrio fischeri NRRL B-11177, is studied in producing gold nanoparticles. This is the first report about the biosynthesis of gold nanoparticles by natural and genetically engineered luminescent bacteria. These microorganisms reduced gold ions and produced fairly monodisperse nanoparticles. TEM analysis indicated that spherical nano gold particles in the different diameters and shapes were obtained at pH values of 6.64. In this biosynthesis protocol, the gold nanoparticles with desired shape and size can be prepared.

Genotypic intraspecies heterogeneity of Enterococcus italicus: data from dairy environments.

PubMed

Borgo, Francesca; Ferrario, Chiara; Ricci, Giovanni; Fortina, Maria Grazia

2013-01-01

The diversity of a collection of 19 Enterococcus italicus strains isolated from different dairy sources was explored using a molecular polyphasic approach, comprising random amplification of polymorphic DNA (RAPD-PCR), repetitive element PCR (REP-PCR), plasmid profiling and ribotyping. The data obtained showed a high-level of biodiversity, not always correlated to the niche of isolation. Particularly, REP-PCR with primer BOXA1R and plasmid profiling allowed the best discrimination at strain level. Exploiting the genome shotgun sequence of the type strain of the species, available in public database, genes related to insertion sequences present on enterococcal Pathogenic Islands (ISEf1, IS905), determinants related to virulence factors (codifying for hemolysin and cell wall surface proteins), exogenously DNA (conjugal transfer protein, replication plasmid protein, pheromone shutdown protein, phage integrase/recombinase) and penicillin binding proteins system were detected. The presence of most of these genes seemed a common genetic trait in the Enterococcus genus, sur gene (cell wall surface protein) was only detected in strains of E. italicus. To our knowledge, this is the first time that specific primers, with the expection of the species-specific probe targeted to 16S rRNA gene, have been designed for this species. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

TDRS-L Spacecraft Fairing Encapsulation

NASA Image and Video Library

2014-01-08

TITUSVILLE, Fla. – Inside the Astrotech payload processing facility in Titusville, United Launch Alliance engineers and technicians encapsulate the Tracking and Data Relay Satellite, or TDRS-L, spacecraft in its payload fairing. TDRS-L will then be transported to Launch Complex 41 at Cape Canaveral Air Force Station. The TDRS-L satellite will be a part of the second of three next-generation spacecraft designed to ensure vital operational continuity for the NASA Space Network. It is scheduled to launch from Cape Canaveral's Space Launch Complex 41 atop a United Launch Alliance Atlas V rocket on January 23, 2014. The current Tracking and Data Relay Satellite system consists of eight in-orbit satellites distributed to provide near continuous information relay contact with orbiting spacecraft ranging from the International Space Station and Hubble Space Telescope to the array of scientific observatories. For more information, visit: http://www.nasa.gov/mission_pages/tdrs/home/index.html

TDRS-L Spacecraft Fairing Encapsulation

NASA Image and Video Library

2014-01-08

TITUSVILLE, Fla. – Inside the Astrotech payload processing facility in Titusville, United Launch Alliance engineers and technicians ensure precision as the Tracking and Data Relay Satellite, or TDRS-L, spacecraft is being encapsulated in its payload fairing in preparation for begin transported to Launch Complex 41 at Cape Canaveral Air Force Station. The TDRS-L satellite will be a part of the second of three next-generation spacecraft designed to ensure vital operational continuity for the NASA Space Network. It is scheduled to launch from Cape Canaveral's Space Launch Complex 41 atop a United Launch Alliance Atlas V rocket on January 23, 2014. The current Tracking and Data Relay Satellite system consists of eight in-orbit satellites distributed to provide near continuous information relay contact with orbiting spacecraft ranging from the International Space Station and Hubble Space Telescope to the array of scientific observatories. For more information, visit: http://www.nasa.gov/mission_pages/tdrs/home/index.html

KSC-2013-2628

NASA Image and Video Library

2013-06-10

VANDENBERG AFB – Orbital Sciences engineers connect the payload fairing over NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is taking place in a hangar at Vandenberg Air Force Base where IRIS, short for Interface Region Imaging Spectrograph, is being prepared for launch on a Pegasus XL rocket. Scheduled for launch from Vandenberg June 26, IRIS will open a new window of discovery by tracing the flow of energy and plasma through the chromospheres and transition region into the sun’s corona using spectrometry and imaging. IRIS fills a crucial gap in our ability to advance studies of the sun-to-Earth connection by tracing the flow of energy and plasma through the foundation of the corona and the region around the sun known as the heliosphere. Photo credit: NASA/Tony Vauclin

KSC-2013-2601

NASA Image and Video Library

2013-06-10

VANDENBERG AFB, Calif. – Engineers conduct inspections on NASA's IRIS spacecraft with blacklights before the payload fairing before it is connected. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is taking place in a hangar at Vandenberg Air Force Base where IRIS, short for Interface Region Imaging Spectrograph, is being prepared for launch on a Pegasus XL rocket. Scheduled for launch from Vandenberg June 26, IRIS will open a new window of discovery by tracing the flow of energy and plasma through the chromospheres and transition region into the sun’s corona using spectrometry and imaging. IRIS fills a crucial gap in our ability to advance studies of the sun-to-Earth connection by tracing the flow of energy and plasma through the foundation of the corona and the region around the sun known as the heliosphere. Photo credit: NASA/Randy Beaudoin

KSC-2013-2642

NASA Image and Video Library

2013-06-10

VANDENBERG AFB – Orbital Sciences team engineers monitor the connection of the payload fairing over NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is taking place in a hangar at Vandenberg Air Force Base where IRIS, short for Interface Region Imaging Spectrograph, is being prepared for launch on a Pegasus XL rocket. Scheduled for launch from Vandenberg June 26, IRIS will open a new window of discovery by tracing the flow of energy and plasma through the chromospheres and transition region into the sun’s corona using spectrometry and imaging. IRIS fills a crucial gap in our ability to advance studies of the sun-to-Earth connection by tracing the flow of energy and plasma through the foundation of the corona and the region around the sun known as the heliosphere. Photo credit: NASA/Tony Vauclin

KSC-2013-2618

NASA Image and Video Library

2013-06-10

VANDENBERG AFB – Orbital Sciences team members watch as engineers connect the payload fairing over NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is taking place in a hangar at Vandenberg Air Force Base where IRIS, short for Interface Region Imaging Spectrograph, is being prepared for launch on a Pegasus XL rocket. Scheduled for launch from Vandenberg June 26, IRIS will open a new window of discovery by tracing the flow of energy and plasma through the chromospheres and transition region into the sun’s corona using spectrometry and imaging. IRIS fills a crucial gap in our ability to advance studies of the sun-to-Earth connection by tracing the flow of energy and plasma through the foundation of the corona and the region around the sun known as the heliosphere. Photo credit: NASA/Tony Vauclin

KSC-2013-2613

NASA Image and Video Library

2013-06-10

VANDENBERG AFB – Engineers attach the starboard side of the payload fairing into place for NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is taking place in a hangar at Vandenberg Air Force Base where IRIS, short for Interface Region Imaging Spectrograph, is being prepared for launch on a Pegasus XL rocket. Scheduled for launch from Vandenberg June 26, IRIS will open a new window of discovery by tracing the flow of energy and plasma through the chromospheres and transition region into the sun’s corona using spectrometry and imaging. IRIS fills a crucial gap in our ability to advance studies of the sun-to-Earth connection by tracing the flow of energy and plasma through the foundation of the corona and the region around the sun known as the heliosphere. Photo credit: NASA/Randy Beaudoin

KSC-2013-2581

NASA Image and Video Library

2013-06-05

VANDENBERG AFB – Engineers move the port side of the payload fairing before it is connected into place for NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is taking place in a hangar at Vandenberg Air Force Base where IRIS, short for Interface Region Imaging Spectrograph, is being prepared for launch on a Pegasus XL rocket. Scheduled for launch from Vandenberg June 26, IRIS will open a new window of discovery by tracing the flow of energy and plasma through the chromospheres and transition region into the sun’s corona using spectrometry and imaging. IRIS fills a crucial gap in our ability to advance studies of the sun-to-Earth connection by tracing the flow of energy and plasma through the foundation of the corona and the region around the sun known as the heliosphere. Photo credit: NASA/Randy Beaudoin

KSC-2013-2617

NASA Image and Video Library

2013-06-10

VANDENBERG AFB - Orbital Sciences engineers connect the payload fairing over NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is taking place in a hangar at Vandenberg Air Force Base where IRIS, short for Interface Region Imaging Spectrograph, is being prepared for launch on a Pegasus XL rocket. Scheduled for launch from Vandenberg June 26, IRIS will open a new window of discovery by tracing the flow of energy and plasma through the chromospheres and transition region into the sun’s corona using spectrometry and imaging. IRIS fills a crucial gap in our ability to advance studies of the sun-to-Earth connection by tracing the flow of energy and plasma through the foundation of the corona and the region around the sun known as the heliosphere. Photo credit: NASA/Tony Vauclin

KSC-2013-2636

NASA Image and Video Library

2013-06-10

VANDENBERG AFB – Orbital Sciences engineers connect the payload fairing over NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is taking place in a hangar at Vandenberg Air Force Base where IRIS, short for Interface Region Imaging Spectrograph, is being prepared for launch on a Pegasus XL rocket. Scheduled for launch from Vandenberg June 26, IRIS will open a new window of discovery by tracing the flow of energy and plasma through the chromospheres and transition region into the sun’s corona using spectrometry and imaging. IRIS fills a crucial gap in our ability to advance studies of the sun-to-Earth connection by tracing the flow of energy and plasma through the foundation of the corona and the region around the sun known as the heliosphere. Photo credit: NASA/Tony Vauclin

KSC-2013-2641

NASA Image and Video Library

2013-06-10

VANDENBERG AFB – Orbital Sciences engineers monitor the connection of the payload fairing over NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is taking place in a hangar at Vandenberg Air Force Base where IRIS, short for Interface Region Imaging Spectrograph, is being prepared for launch on a Pegasus XL rocket. Scheduled for launch from Vandenberg June 26, IRIS will open a new window of discovery by tracing the flow of energy and plasma through the chromospheres and transition region into the sun’s corona using spectrometry and imaging. IRIS fills a crucial gap in our ability to advance studies of the sun-to-Earth connection by tracing the flow of energy and plasma through the foundation of the corona and the region around the sun known as the heliosphere. Photo credit: NASA/Tony Vauclin

KSC-2013-2635

NASA Image and Video Library

2013-06-10

VANDENBERG AFB – Orbital Sciences engineers connect the payload fairing over NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is taking place in a hangar at Vandenberg Air Force Base where IRIS, short for Interface Region Imaging Spectrograph, is being prepared for launch on a Pegasus XL rocket. Scheduled for launch from Vandenberg June 26, IRIS will open a new window of discovery by tracing the flow of energy and plasma through the chromospheres and transition region into the sun’s corona using spectrometry and imaging. IRIS fills a crucial gap in our ability to advance studies of the sun-to-Earth connection by tracing the flow of energy and plasma through the foundation of the corona and the region around the sun known as the heliosphere. Photo credit: NASA/Tony Vauclin

KSC-2013-2639

NASA Image and Video Library

2013-06-10

VANDENBERG AFB – Orbital Sciences engineers connect the payload fairing over NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is taking place in a hangar at Vandenberg Air Force Base where IRIS, short for Interface Region Imaging Spectrograph, is being prepared for launch on a Pegasus XL rocket. Scheduled for launch from Vandenberg June 26, IRIS will open a new window of discovery by tracing the flow of energy and plasma through the chromospheres and transition region into the sun’s corona using spectrometry and imaging. IRIS fills a crucial gap in our ability to advance studies of the sun-to-Earth connection by tracing the flow of energy and plasma through the foundation of the corona and the region around the sun known as the heliosphere. Photo credit: NASA/Tony Vauclin

KSC-2013-2637

NASA Image and Video Library

2013-06-10

VANDENBERG AFB – Orbital Sciences engineers connect the payload fairing over NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is taking place in a hangar at Vandenberg Air Force Base where IRIS, short for Interface Region Imaging Spectrograph, is being prepared for launch on a Pegasus XL rocket. Scheduled for launch from Vandenberg June 26, IRIS will open a new window of discovery by tracing the flow of energy and plasma through the chromospheres and transition region into the sun’s corona using spectrometry and imaging. IRIS fills a crucial gap in our ability to advance studies of the sun-to-Earth connection by tracing the flow of energy and plasma through the foundation of the corona and the region around the sun known as the heliosphere. Photo credit: NASA/Tony Vauclin

KSC-2013-2602

NASA Image and Video Library

2013-06-10

VANDENBERG AFB, Calif. – Engineers conduct inspections on NASA's IRIS spacecraft with blacklights before the payload fairing before it is connected. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is taking place in a hangar at Vandenberg Air Force Base where IRIS, short for Interface Region Imaging Spectrograph, is being prepared for launch on a Pegasus XL rocket. Scheduled for launch from Vandenberg June 26, IRIS will open a new window of discovery by tracing the flow of energy and plasma through the chromospheres and transition region into the sun’s corona using spectrometry and imaging. IRIS fills a crucial gap in our ability to advance studies of the sun-to-Earth connection by tracing the flow of energy and plasma through the foundation of the corona and the region around the sun known as the heliosphere. Photo credit: NASA/Randy Beaudoin

KSC-2013-2580

NASA Image and Video Library

2013-06-05

- VANDENBERG AFB – An engineer makes preparations on the starboard side of the payload fairing before it is connected into place for NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is taking place in a hangar at Vandenberg Air Force Base where IRIS, short for Interface Region Imaging Spectrograph, is being prepared for launch on a Pegasus XL rocket. Scheduled for launch from Vandenberg June 26, IRIS will open a new window of discovery by tracing the flow of energy and plasma through the chromospheres and transition region into the sun’s corona using spectrometry and imaging. IRIS fills a crucial gap in our ability to advance studies of the sun-to-Earth connection by tracing the flow of energy and plasma through the foundation of the corona and the region around the sun known as the heliosphere. Photo credit: NASA/Randy Beaudoin

KSC-2013-2616

NASA Image and Video Library

2013-06-11

Orbital Sciences engineers connect the payload fairing over NASA's IRIS spacecraft. The fairing connects to the nose of the Orbital Sciences Pegasus XL rocket that will lift the solar observatory into orbit in June. The work is taking place in a hangar at Vandenberg Air Force Base where IRIS, short for Interface Region Imaging Spectrograph, is being prepared for launch on a Pegasus XL rocket. Scheduled for launch from Vandenberg June 26, IRIS will open a new window of discovery by tracing the flow of energy and plasma through the chromospheres and transition region into the sun’s corona using spectrometry and imaging. IRIS fills a crucial gap in our ability to advance studies of the sun-to-Earth connection by tracing the flow of energy and plasma through the foundation of the corona and the region around the sun known as the heliosphere. Photo credit: NASA/Tony Vauclin

Sustaining engineering codes of ethics for the twenty-first century.

PubMed

Michelfelder, Diane; Jones, Sharon A

2013-03-01

How much responsibility ought a professional engineer to have with regard to supporting basic principles of sustainable development? While within the United States, professional engineering societies, as reflected in their codes of ethics, differ in their responses to this question, none of these professional societies has yet to put the engineer's responsibility toward sustainability on a par with commitments to public safety, health, and welfare. In this paper, we aim to suggest that sustainability should be included in the paramountcy clause because it is a necessary condition to ensure the safety, health, and welfare of the public. Part of our justification rests on the fact that to engineer sustainably means among many things to consider social justice, understood as the fair and equitable distribution of social goods, as a design constraint similar to technical, economic, and environmental constraints. This element of social justice is not explicit in the current paramountcy clause. Our argument rests on demonstrating that social justice in terms of both inter- and intra-generational equity is an important dimension of sustainability (and engineering). We also propose that embracing sustainability in the codes while recognizing the role that social justice plays may elevate the status of the engineer as public intellectual and agent of social good. This shift will then need to be incorporated in how we teach undergraduate engineering students about engineering ethics.

KSC-2013-3863

NASA Image and Video Library

2013-11-06

CAPE CANAVERAL, Fla. – Engineers and technicians get ready to move NASA's MAVEN spacecraft, inside payload fairing inside the Payload Hazardous Servicing Facility, or PHSF, into the airlock for mounting to a trailer for transport to Space Launch Complex 41 where it will be hoisted atop a United Launch Alliance Atlas V rocket that will lift it into space and on to Mars. MAVEN is short for Mars Atmosphere and Volatile Evolution. Photo credit: NASA/Kim Shiflett

Engineering For Ship Production: A Textbook

DTIC Science & Technology

1986-06-01

content. (g) Bulbous Bow. Bulbous bows are wave-resistance-reducing devices. They incorporate displacement at the bow forefoot , which sets up a surface...displacement from the fore body in way of the load waterline entrance to the bow forefoot in the form of a faired-in bulb. More recently, the...install open-ended sounding tubes with striking plates welded to the tank bottom. Where the sounding tuba slopes at the end, it is common to close the

FY83 Posture Report: Research, Development, Engineering and Acquisition.

DTIC Science & Technology

1983-01-01

to provide staff management and con- fluids, corrosion preventives, chemistry , chemical trol of Belvoir R&D Center’s force structure through the...vialiing boith FV82 antI FY83 fundsi. Early mianagenlerit r atar refletotrs anti c4tint racting fair sei-imi-generat itir iietlingp estabrlisliedi the phi...ft) to accommodate boats such as the fabrics. paper chemistry , preservatives, fuels, optical LCU, LCM-8. Ribbon Bridge Erection Boat, Small Tug. and

Cooling Tests of an Airplane Equipped with an NACA Cowling and a Wing-duct Cooling System

NASA Technical Reports Server (NTRS)

Turner, L I , Jr; Bierman, David; Boothy, W B

1941-01-01

Cooling tests were made of a Northrop A-17A attack airplane successively equipped with a conventional.NACA cowling and with a wing-duct cooling system. The method of cooling the engine by admitting air from the propeller slipstream into wing ducts, passing it first through the accessory compartment and then over the engine from rear to front, appeared to offer possibilities for improved engine cooling, increased cooling of the accessories, and better fairing of the power-plant installation. The results showed that ground cooling for the wing duct system without cowl flap was better than for the NACA cowling with flap; ground cooling was appreciably improved by installing a cowl flap. Satisfactory temperatures were maintained in both climb and high-speed flight, but, with the use of conventional baffles, a greater quantity of cooling air appeared to be required for the wing duct system.

Surface modeling method for aircraft engine blades by using speckle patterns based on the virtual stereo vision system

NASA Astrophysics Data System (ADS)

Yu, Zhijing; Ma, Kai; Wang, Zhijun; Wu, Jun; Wang, Tao; Zhuge, Jingchang

2018-03-01

A blade is one of the most important components of an aircraft engine. Due to its high manufacturing costs, it is indispensable to come up with methods for repairing damaged blades. In order to obtain a surface model of the blades, this paper proposes a modeling method by using speckle patterns based on the virtual stereo vision system. Firstly, blades are sprayed evenly creating random speckle patterns and point clouds from blade surfaces can be calculated by using speckle patterns based on the virtual stereo vision system. Secondly, boundary points are obtained in the way of varied step lengths according to curvature and are fitted to get a blade surface envelope with a cubic B-spline curve. Finally, the surface model of blades is established with the envelope curves and the point clouds. Experimental results show that the surface model of aircraft engine blades is fair and accurate.

Applied optics and optical engineering. Volume 9

NASA Astrophysics Data System (ADS)

Shannon, R. R.; Wyant, J. C.

This volume of the series continues the variety of articles which have appeared in the past two volumes. The range of topics runs from the most applied to some fairly complex theory. Basic algorithms for optical engineering are considered along with diffraction gratings, recording and reading of information on optical disks, and the perfect point spread function. An atlas is provided of the imagery which can be expected from telescopes, or other optical systems with nonconventional aperture shapes. A chapter on simulators collects descriptions of the principal types of visual simulators into one article. The optics of the eye is discussed with special emphasis on modern concepts such as contact lenses and automatic refraction. Attention is given to the theory which is of great interest to the applied optical engineer who needs to understand some of the fundamental relations and limitations on image formation by lenses.

A Review of the MLAS Parachute Systems

NASA Technical Reports Server (NTRS)

Taylor, Anthony P.; Kelley, Christopher; Magner, Eldred; Peterson, David; Hahn, Jeffrey; Yuchnovicz, Daniel E.

2009-01-01

The NASA Engineering and Safety Center (NESC) is developing the Max Launch Abort System (MLAS) as a risk-mitigation design should problems arise with the baseline Orion spacecraft launch abort design. The Max in MLAS is dedicated to Max Faget, the renowned NASA spacecraft designer. The MLAS flight test vehicle consists of boost skirt, coast skirt and the MLAS fairing which houses a full scale boilerplate Orion Crew Module (CM). The objective of the flight test is to prove that the CM can be released from the MLAS fairing during pad abort conditions without detrimental recontact between the CM and fairing, achieving performance similar to the Orion launch abort system. The boost and coast skirts provide the necessary thrust and stability to achieve the flight test conditions and are released prior to the test -- much like the Little Joe booster was used in the Apollo Launch Escape System tests. To achieve the test objective, two parachutes are deployed from the fairing to reorient the CM/fairing to a heatshield first orientation. The parachutes then provide the force necessary to reduce the total angle of attack and body angular rates required for safe release of the CM from the fairing. A secondary test objective after CM release from the fairing is to investigate the removal of the CM forward bay cover (FBC) with CM drogue parachutes for the purpose of attempting to synchronously deploying a set of CM main parachutes. Although multiple parachute deployments are used in the MLAS flight test vehicle to complete its objective, there are only two parachute types employed in the flight test. Five of the nine parachutes used for MLAS are 27.6 ft D(sub 0) ribbon parachutes, and the remaining four are standard G-12 cargo parachutes. This paper presents an overview of the 27.6 ft D(sub 0) ribbon parachute system employed on the MLAS flight test vehicle for coast skirt separation, fairing reorientation, and as drogue parachutes for the CM after separation from the fairing. Discussion will include: the process used to select this design, previously proven as a spin/stall recovery parachute; descriptions of all components of the parachute system; the minor modifications necessary to adapt the parachute to the MLAS program; the techniques used to analyze the parachute for the multiple roles it performs; a discussion of the rigging techniques used to interface the parachute system to the vehicle; and a brief description of how the evolution of the program affected parachute usage and analysis. An overview of the Objective system, rationale for the MLAS approach and the future of the program will also be presented. We hope to have flight test results to report at the time of the Conference Presentation.

Uterine Artery Embolization: An Analysis of Online Patient Information Quality and Readability with Historical Comparison.

PubMed

Murray, Timothy E; Mansoor, Tayyaub; Bowden, Dermot J; O'Neill, Damien C; Lee, Michael J

2018-05-01

Investigators aimed to assess online information describing uterine artery embolization (UAE) to examine the quality and readability of websites patients are accessing. A list of applicable, commonly used searchable terms was generated, including "Uterine Artery Embolization," "Fibroid Embolization," "Uterine Fibroid Embolization," and "Uterine Artery Embolisation." Each possible term was assessed across the five most-used English language search engines to determine the most commonly used term. The most common term was then investigated across each search engine, with the first 25 pages returned by each engine included for analysis. Duplicate pages, nontext content such as video or audio, and pages behind paywalls were excluded. Pages were analyzed for quality and readability using validated tools including DISCERN score, JAMA Benchmark Criteria, HONcode Certification, Flesch Reading Ease Score, Flesch-Kincaid Grade Level, and Gunning-Fog Index. Secondary features such as age, rank, author, and publisher were recorded. The most common applicable term was "Uterine Artery Embolization" (492,900 results). Mean DISCERN quality of information provided by UAE websites is "fair"; however, it has declined since comparative 2012 studies. Adherence to JAMA Benchmark Criteria has reduced to 6.7%. UAE website readability remains more difficult than the World Health Organization-recommended 7-8th grade reading levels. HONcode-certified websites (35.6%) demonstrated significantly higher quality than noncertified websites. Quality of online UAE information remains "fair." Adherence to JAMA benchmark criteria is poor. Readability is above recommended 7-8th grade levels. HONcode certification was predictive of higher website quality, a useful guide to patients requesting additional information. Copyright © 2018 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

Fair Oaks Dairy Farms Cellulosic Ethanol Technology Review Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrew Wold; Robert Divers

2011-06-23

At Fair Oaks Dairy, dried manure solids (''DMS'') are currently used as a low value compost. United Power was engaged to evaluate the feasibility of processing these DMS into ethanol utilizing commercially available cellulosic biofuels conversion platforms. The Fair Oaks Dairy group is transitioning their traditional ''manure to methane'' mesophilic anaerobic digester platform to an integrated bio-refinery centered upon thermophilic digestion. Presently, the Digested Manure Solids (DMS) are used as a low value soil amendment (compost). United Power evaluated the feasibility of processing DMS into higher value ethanol utilizing commercially available cellulosic biofuels conversion platforms. DMS was analyzed and overmore » 100 potential technology providers were reviewed and evaluated. DMS contains enough carbon to be suitable as a biomass feedstock for conversion into ethanol by gasification technology, or as part of a conversion process that would include combined heat and power. In the first process, 100% of the feedstock is converted into ethanol. In the second process, the feedstock is combusted to provide heat to generate electrical power supporting other processes. Of the 100 technology vendors evaluated, a short list of nine technology providers was developed. From this, two vendors were selected as finalists (one was an enzymatic platform and one was a gasification platform). Their selection was based upon the technical feasibility of their systems, engineering expertise, experience in commercial or pilot scale operations, the ability or willingness to integrate the system into the Fair Oaks Biorefinery, the know-how or experience in producing bio-ethanol, and a clear path to commercial development.« less

Airframe Noise Results from the QTD II Flight Test Program

NASA Technical Reports Server (NTRS)

Elkoby, Ronen; Brusniak, Leon; Stoker, Robert W.; Khorrami, Mehdi R.; Abeysinghe, Amal; Moe, Jefferey W.

2007-01-01

With continued growth in air travel, sensitivity to community noise intensifies and materializes in the form of increased monitoring, regulations, and restrictions. Accordingly, realization of quieter aircraft is imperative, albeit only achievable with reduction of both engine and airframe components of total aircraft noise. Model-scale airframe noise testing has aided in this pursuit; however, the results are somewhat limited due to lack of fidelity of model hardware, particularly in simulating full-scale landing gear. Moreover, simulation of true in-flight conditions is non-trivial if not infeasible. This paper reports on an investigation of full-scale landing gear noise measured as part of the 2005 Quiet Technology Demonstrator 2 (QTD2) flight test program. Conventional Boeing 777-300ER main landing gear were tested, along with two noise reduction concepts, namely a toboggan fairing and gear alignment with the local flow, both of which were down-selected from various other noise reduction devices evaluated in model-scale testing at Virginia Tech. The full-scale toboggan fairings were designed by Goodrich Aerostructures as add-on devices allowing for complete retraction of the main gear. The baseline-conventional gear, faired gear, and aligned gear were all evaluated with the high-lift system in the retracted position and deployed at various flap settings, all at engine idle power setting. Measurements were taken with flyover community noise microphones and a large aperture acoustic phased array, yielding far-field spectra, and localized sources (beamform maps). The results were utilized to evaluate qualitatively and quantitatively the merit of each noise reduction concept. Complete similarity between model-scale and full-scale noise reduction levels was not found and requires further investigation. Far-field spectra exhibited no noise reduction for both concepts across all angles and frequencies. Phased array beamform maps show inconclusive evidence of noise reduction at selective frequencies (1500 to 3000 Hz) but are otherwise in general agreement with the far-field spectra results (within measurement uncertainty).

Space and Missile Systems Center Standard: Test Requirements for Launch, Upper-Stage and Space Vehicles

DTIC Science & Technology

2014-09-05

adiabatic expansion of a perfect gas ; b. Contains a gas or liquid that would endanger personnel or equipment or create a mis- hap if released; or c...Guidelines for Liquid Rocket Engines 31. TOR-2013(3213)-6 Acoustic Testing on Production Space Vehicle (The Value of the Test and Deletion...materials used in space vehicles, interstages, payload adapters, payload fairings, motor cases, nozzles , propellant tanks, and over-wrapped pressure vessels

Applications of Composite Materials in Helicopter Construction (Les Applications des Materiaux Composite dans la Construction des Helicopteres),

DTIC Science & Technology

1983-11-21

TRANSLATION TITLE: APPLICATIONS OF COMPOSITE MATERIALS IN HELICOPTER CONSTRUCTION LES APPLICATIONS DES MATERTAUX COMWSITE DANS LA CONSTRUCTION DES...International Symposium on Design and Use of Kevlar in Aircraft, Geneva, 12 October 1982 [Beziac, Gilbert;* Les applications des mat6riaux composite...the pilot’s orders to the engine and the rotors. --Rear rotor Conventional or "faired propeller" type with its overall pitch control --Vibration

Bio-Inspired Engineering of Protein-Based Heat Sensors

DTIC Science & Technology

2004-01-01

of Thermosensitive Proteins. 23 3.1 Introduction 23 3.2 Low Stringency PCR Identification of TRPV1 Homologues from Pit Viper Trigeminal Ganglion...Methods and Results. 24 3.3 Directed Evolution of TRPV1 Protein. 25 3.4 Methods and Results 25 3.5 References 27 Pappas, TC F49620-01-1-0552 3 1. Unique...cation channel TRPV1 . Thermal nociceptive neurons are fairly plentiful, and thus benefited studies linking TRPVI to thermal responses. The snake pit

Current Methods for Evaluation of Physical Security System Effectiveness.

DTIC Science & Technology

1981-05-01

It also helps the user modify a data set before further processing. (c) Safeguards Engineering and Analysis Data Base (SEAD)--To complete SAFE’s...graphic display software in addition to a Fortran compiler, and up to about (3 35,000 words of storage. For a fairly complex problem, a single run through...operational software . 94 BIBLIOGRAPHY Lenz, J.E., "The PROSE (Protection System Evaluator) Model," Proc. 1979 Winter Simulation Conference, IEEE, 1979

Engineering Design Handbook. Development Guide for Reliability. Part Two. Design for Reliability

DTIC Science & Technology

1976-01-01

Component failure rates, however, have been recorded by many sources as a function of use and environment. Some of these sources are listed in Refs. 13-17...other systems capable of creating an explosive reac- tion. The second category is fairly obvious and includes many variations on methods for providing...aboutthem. 4. Ability to detect signals ( including patterns) in high noise environments. 5. Ability to store large amounts of informa- tion for long

HPC in a HEP lab: lessons learned from setting up cost-effective HPC clusters

NASA Astrophysics Data System (ADS)

Husejko, Michal; Agtzidis, Ioannis; Baehler, Pierre; Dul, Tadeusz; Evans, John; Himyr, Nils; Meinhard, Helge

2015-12-01

In this paper we present our findings gathered during the evaluation and testing of Windows Server High-Performance Computing (Windows HPC) in view of potentially using it as a production HPC system for engineering applications. The Windows HPC package, an extension of Microsofts Windows Server product, provides all essential interfaces, utilities and management functionality for creating, operating and monitoring a Windows-based HPC cluster infrastructure. The evaluation and test phase was focused on verifying the functionalities of Windows HPC, its performance, support of commercial tools and the integration with the users work environment. We describe constraints imposed by the way the CERN Data Centre is operated, licensing for engineering tools and scalability and behaviour of the HPC engineering applications used at CERN. We will present an initial set of requirements, which were created based on the above constraints and requests from the CERN engineering user community. We will explain how we have configured Windows HPC clusters to provide job scheduling functionalities required to support the CERN engineering user community, quality of service, user- and project-based priorities, and fair access to limited resources. Finally, we will present several performance tests we carried out to verify Windows HPC performance and scalability.

Novel opportunities and challenges offered by nanobiomaterials in tissue engineering

PubMed Central

Gelain, Fabrizio

2008-01-01

Over the last decades, tissue engineering has demonstrated an unquestionable potential to regenerate damaged tissues and organs. Some tissue-engineered solutions recently entered the clinics (eg, artificial bladder, corneal epithelium, engineered skin), but most of the pathologies of interest are still far from being solved. The advent of stem cells opened the door to large-scale production of “raw living matter” for cell replacement and boosted the overall sector in the last decade. Still reliable synthetic scaffolds fairly resembling the nanostructure of extracellular matrices, showing mechanical properties comparable to those of the tissues to be regenerated and capable of being modularly functionalized with biological active motifs, became feasible only in the last years thanks to newly introduced nanotechnology techniques of material design, synthesis, and characterization. Nanostructured synthetic matrices look to be the next generation scaffolds, opening new powerful pathways for tissue regeneration and introducing new challenges at the same time. We here present a detailed overview of the advantages, applications, and limitations of nanostructured matrices with a focus on both electrospun and self-assembling scaffolds. PMID:19337410

Digital Image Analysis Algorithm For Determination of Particle Size Distributions In Diesel Engines

NASA Astrophysics Data System (ADS)

Armas, O.; Ballesteros, R.; Gomez, A.

One of the most serious problems associated to Diesel engines is pollutant emissions, standing out nitrogen oxides and particulate matter. However, although current emis- sions standards in Europe and America with regard to light vehicles and heavy duty engines refer the particulate limit in mass units, concern for knowing size and number of particles emitted by engines is being increased recently. This interest is promoted by last studies about particle harmful effects on health and is enhanced by recent changes in internal combustion engines technology. This study is focused on the implementation of a method to determine the particle size distribution made up in current methodology for vehicles certification in Europe. It will use an automated Digital Image Analysis Algorithm (DIAA) to determine particle size trends from Scanning Electron Microscope (SEM) images of filters charged in a dilution system used for measuring specific particulate emissions. The experimental work was performed on a steady state direct injection Diesel en- gine with 0.5 MW rated power, being considered as a typical engine in middle power industries. Particulate size distributions obtained using DIAA and a Scanning Mobil- ity Particle Sizer (SMPS), nowadays considered as the most reliable technique, were compared. Although number concentration detected by this method does not repre- sent real flowing particle concentration, this algorithm fairly reproduces the trends observed with SMPS when the engine load is varied.

Fairing Well: Aerodynamic Truck Research at NASA Dryden Flight Research Center. From Shoebox to Bat Truck and Beyond

NASA Technical Reports Server (NTRS)

Gelzer, Christian

2011-01-01

In 1973 engineers at Dryden began investigating ways to reduce aerodynamic drag on land vehicles. They began with a delivery van whose shape they changed dramatically, finally reducing its aerodynamic drag by more than 5 percent. They then turned their attention to tracator-trailers, modifying a cab-over and reducing its aerodynamic drag by nearly 25 percent. Further research identified additional areas worth attention, but in the intervening decades few of those changes have appeared.

A Review of Environmental and Engineering Studies Concerning Effects of Extended Season Navigation on the Great Lakes-St. Lawrence Seaway System

DTIC Science & Technology

1988-10-01

hydroelectric power companies set across the St. Lawrence River in early winter to ensure dependable electric power generation in winter. One scheme was to...leave part of the boom open, but connected, and pull it closed after the last ship passed through using an electric winch mounted on a cell structure...needing a supplemntal safety loop. It was electrically operated, submersible, sensitive, and fairly light. Eventually the tension link design, including

Multi-megavolt low jitter multistage switch

DOEpatents

Humphreys, D.R.; Penn, K.J. Jr.

1985-06-19

It is one object of the present invention to provide a multistage switch capable of holding off numerous megavolts, until triggered, from a particle beam accelerator of the type used for inertial confinement fusion. The invention provides a multistage switch having low timing jitter and capable of producing multiple spark channels for spreading current over a wider area to reduce electrode damage and increase switch lifetime. The switch has fairly uniform electric fields and a short spark gap for laser triggering and is engineered to prevent insulator breakdowns.

State of STEM (SoSTEM) Address

NASA Image and Video Library

2014-01-29

Dr. John P. Holdren, Assistant to the President for Science and Technology and Director of the White House Office of Science & Technology Policy, left, smiles along with 16-year-old Joey Hudy, a former White House Science Fair participant and self-described “Maker” at the annual White House State of Science, Technology, Engineering, and Math (SoSTEM) address, Wednesday, Jan. 29, 2014, in the South Court Auditorium in the Eisenhower Executive Office Building on the White House complex in Washington. Photo Credit: (NASA/Bill Ingalls)

Proceedings of SPIE - the International Society for Optical Engineering. Ocean Optics 12 Held in Bergen, Norway on 13-15 June 1994

DTIC Science & Technology

1994-06-15

that this meeting was noteworthy in that this "thaw" in the cold war was extended to our ocean optics community in a very productive way. It was indeed...light is attenuated significantly in productive waters over fairly short distances. The Doss-Wells instrument which used the Zaneveld-Wells algorithm...these global questions include agriculture, mariculture and fisheries production , deforestation, desertification, ozone depletion, air and water

Experimental- Analitical Procedure Of Definition Of Thermal Fluxes On The Head Fairing Of Launch Vehicles

NASA Astrophysics Data System (ADS)

Yurchenko, I.; Karakotin, I.; Kudinov, A.

2011-05-01

Minimization of head fairing heat protection shield weight during spacecraft injecting in atmosphere dense layers is a complicated task. The identification of heat transfer coefficient on heat protection shield surface during injection can be considered as a primary task to be solved with certain accuracy in order to minimize heat shield weight as well as meet reliability requirements. The height of the roughness around sound point on the head fairing spherical nose tip has a great influence on the heat transfer coefficient calculation. As it has found out during flight tests the height of the roughness makes possible to create boundary layer transition criterion on the head fairing in flight. Therefore the second task is an assessment how height of the roughness influences on the total incoming heat flux to the head fairing. And finally the third task is associated with correct implementation of the first task results, as there are changing boundary conditions during a flight such as bubbles within heat shield surface paint and thermal protection ablation for instance. In the article we have considered results of flight tests carried out using launch vehicles which allowed us to measure heat fluxes in flight and to estimate dispersions of heat transfer coefficient. The experimental-analytical procedure of defining heat fluxes on the LV head fairings has been presented. The procedure includes: - calculation of general-purpose dimensionless heat transfer coefficient - Nusselt number Nueff - based on the proposed effective temperature Teff method. The method allows calculate the Nusselt number values for cylindrical surfaces as well as dispersions of heat transfer coefficient; - universal criterion of turbulent-laminar transition for blunted head fairings - Reynolds number Reek = [ρеUеk/μе]TR = const , which gives the best correlation of all dates of flight experiment carried out per Reda procedure to define turbulent-laminar transition in boundary layer. The criterion allows defining time margins when turbulent flux on space head surfaces exists. It was defined that in conditions when high background disturbances of free stream flux while main LV engines operating join with integrated roughness influence the critical value of Reynolds number is an order-diminished value compared to values obtained in wind tunnels and in free flight. Influence of minimization of height of surface roughness near sound point on head fairing nose has been estimated. It has been found that the criterion of turbulent-laminar transition for smooth head fairings elements - Reynolds number - reaches the limit value which is equal to 200. This value is obtained from momentum thickness Reynolds number when roughness height is close to zero. So the turbulent- laminar flux transition occurs earlier with decreased duration of effect of high turbulent heat fluxes to the heat shield. This will allow decreasing head shield thickness up to 30%

Applying Open Source Game Engine for Building Visual Simulation Training System of Fire Fighting

NASA Astrophysics Data System (ADS)

Yuan, Diping; Jin, Xuesheng; Zhang, Jin; Han, Dong

There's a growing need for fire departments to adopt a safe and fair method of training to ensure that the firefighting commander is in a position to manage a fire incident. Visual simulation training systems, with their ability to replicate and interact with virtual fire scenarios through the use of computer graphics or VR, become an effective and efficient method for fire ground education. This paper describes the system architecture and functions of a visual simulated training system of fire fighting on oil storage, which adopting Delat3D, a open source game and simulation engine, to provide realistic 3D views. It presents that using open source technology provides not only the commercial-level 3D effects but also a great reduction of cost.

Failure is an option: Reactions to failure in elementary engineering design projects

NASA Astrophysics Data System (ADS)

Johnson, Matthew M.

Recent reform documents in science education have called for teachers to use epistemic practices of science and engineering researchers to teach disciplinary content (NRC, 2007; NRC, 2012; NGSS Lead States, 2013). Although this creates challenges for classroom teachers unfamiliar with engineering, it has created a need for high quality research about how students and teachers engage in engineering activities to improve curriculum development and teaching pedagogy. While framers of the Next Generation Science Standards (NRC, 2012; NGSS Lead States 2013) focused on the similarities of the practices of science researchers and engineering designers, some have proposed that engineering has a unique set of epistemic practices, including improving from failure (Cunningham & Carlsen, 2014; Cunningham & Kelly, in review). While no one will deny failures occur in science, failure in engineering is thought of in fundamentally different ways. In the study presented here, video data from eight classes of elementary students engaged in one of two civil engineering units were analyzed using methods borrowed from psychology, anthropology, and sociolinguistics to investigate: 1) the nature of failure in elementary engineering design; 2) the ways in which teachers react to failure; and 3) how the collective actions of students and teachers support or constrain improvement in engineering design. I propose new ways of considering the types and causes of failure, and note three teacher reactions to failure: the manager, the cheerleader, and the strategic partner. Because the goal of iteration in engineering is improvement, I also studied improvement. Students only systematically improve when they have the opportunity, productive strategies, and fair comparisons between prototypes. I then investigate the use of student engineering journals to assess learning from the process of improvement after failure. After discussion, I consider implications from this work as well as future research to advance our understanding in this area.

Linking engineering and medicine: fostering collaboration skills in interdisciplinary teams.

PubMed

Khoo, Michael C K

2012-07-01

Biomedical engineering embodies the spirit of combining disciplines. The engineer's pragmatic approach to--and appetite for--solving problems is matched by a bounty of technical challenges generated in medical domains. From nanoscale diagnostics to the redesign of systems of health-care delivery, engineers have been connecting advances in basic and applied science with applications that have helped to improve medical care and outcomes. Increasingly, however, integrating these areas of knowledge and application is less individualistic and more of a team sport. Success increasingly relies on a direct focus on practicing and developing collaboration skills in interdisciplinary teams. Such an approach does not fit easily into individual-focused, discipline-based programs. Biomedical engineering has done its fair share of silo busting, but new approaches are needed to inspire interdisciplinary teams to form around challenges in particular areas. Health care offers a wide variety of complex challenges across an array of delivery settings that can call for new interdisciplinary approaches. This was recognized by the deans of the University of Southern California's (USC's) Medical and Engineering Schools when they began the planning process, leading to the creation of the Health, Technology, and Engineering (HTE@USC or HTE for short) program. “Health care and technology are changing rapidly, and future physicians and engineers need intellectual tools to stay ahead of this change,” says Carmen A. Puliafito, dean of the Keck School of Medicine. His goal is to train national leaders in the quest for devices and processes to improve health care.

CosmoQuest: Engaging Students in Authentic Research through Science Fairs

NASA Astrophysics Data System (ADS)

Lebofsky, Larry A.; Canizo, Thea; Buxner, Sanlyn; Schmitt, Bill; Runco, Susan; Graff, Paige; CosmoQuest Team

2016-10-01

CosmoQuest is embarking on a five-year effort to increase student participation in science fairs through nation-wide training of teachers, science educators, and scientists. The program focuses on helping teachers attain the needed content knowledge and skills to support creation of meaningful science fair research projects. . This includes supporting teachers' understanding of how to engage students in age-appropriate projects as young science and engineering professionals. If successful, students will create their own understanding of STEM content through research. This occurs when students are guided into learning where they become involved at a level that makes it possible for them to independently ask questions and investigate answers by seeking patterns, testing, building conceptual models, and/or designing technology.To support this kind of engagement, we are curating and creating resources to support students of all ages and abilities. Students at different age levels generally have very different developmental reasoning abilities, and engagement and learning are increased when students use age-appropriate reasoning abilities. For instance primary students are effective in observing, communicating, and comparing. As they get older they develop abilities in sequencing and finding relationships. At middle school they add inferring and finally in high school the acquired skills for applying ideas from many disciplines to create more complex understanding.Through a comprehensive program of curriculum development, educator professional development, and building strategic partnerships, we will increase the number and quality of space science related science fair projects in the United States. CosmoQuest is funded through individual donations, through NASA Cooperative Agreement NNX16AC68A, and through additional grants and contracts that are listed on the About page of our website, cosmoquest.org.

Viscous Aerodynamic Shape Optimization with Installed Propulsion Effects

NASA Technical Reports Server (NTRS)

Heath, Christopher M.; Seidel, Jonathan A.; Rallabhandi, Sriram K.

2017-01-01

Aerodynamic shape optimization is demonstrated to tailor the under-track pressure signature of a conceptual low-boom supersonic aircraft. Primarily, the optimization reduces nearfield pressure waveforms induced by propulsion integration effects. For computational efficiency, gradient-based optimization is used and coupled to the discrete adjoint formulation of the Reynolds-averaged Navier Stokes equations. The engine outer nacelle, nozzle, and vertical tail fairing are axi-symmetrically parameterized, while the horizontal tail is shaped using a wing-based parameterization. Overall, 48 design variables are coupled to the geometry and used to deform the outer mold line. During the design process, an inequality drag constraint is enforced to avoid major compromise in aerodynamic performance. Linear elastic mesh morphing is used to deform volume grids between design iterations. The optimization is performed at Mach 1.6 cruise, assuming standard day altitude conditions at 51,707-ft. To reduce uncertainty, a coupled thermodynamic engine cycle model is employed that captures installed inlet performance effects on engine operation.

Hawaii Student / Teacher Astronomy Research program (HI STAR): 10 years of high school students exploring the universe

NASA Astrophysics Data System (ADS)

Mathews, Geoffrey; Armstrong, James; Nassir, Michael A.; Kaichi, Carolyn

2017-01-01

For the past decade, the Hawaii Student / Teacher Astronomy Research program (HI STAR) at UH Manoa’s Institute for Astronomy has trained astronomy-enthusiastic high school students in research, data analysis and science presentation skills. Every summer, a selected group of 8th-to-12th-grade students attend a week-long residential astronomy "camp" in Honolulu, Hawaii. The students experience the profession of astronomy by learning scientific skills such as imaging and spectroscopy, data-reduction, and data analysis. The week culminates with presention of a research project guided by professional astronomer mentors. During the following six months, each student continues to work with a mentor to complete a research project for submission to their local science fair. From 2012 - 2015, ~80% of students completed their long-term projects. Many have performed well; in each of 2015 and 2016, 5 alumni progressed to the International Science and Engineering Fair. Here we present the current structure of HI STAR and plans for the future.

Design study of an advanced gas generator. [which can be ignited during start-up period of turbine engines

NASA Technical Reports Server (NTRS)

Kim, S.; Trinh, H. P.

1993-01-01

A gas generator which can be ignited reliably during the initial start-up period and offers fairly uniform gas temperature at the exit was studied numerically. Various sizes and shapes of the mixing enhancement devices and their positions were examined to evaluate the uniformity of the exit gas temperature and the change of internal pressure drop incurred by introducing the mixing enhancement devices. By introducing a turbulence ring and a splash plate with an appropriate size and position, it was possible to obtain fairly uniform gas temperature distributions and a maximum gas temperature that is within the design limit temperature of 1600 R at the generator exit. However, with the geometry studied, the pressure drop across the generator was great, approximately 1150 psi, to satisfy the assigned design limit temperature. If the design limit temperature is increased to 1650 R, the pressure drop across the generator could be lowered by as much as 350 psi.

Delta II ICESat-2 Fairing Cleaning and Sampling

NASA Image and Video Library

2018-04-06

On Friday, April 6, 2018, in NASA’s Building 8337 at Vandenberg Air Force Base in California, technicians and engineers clean and take samples from the payload fairing the will protect NASA's Ice, Cloud and land Elevation Satellite-2, or ICESat-2, satellite during launch. Liftoff atop a United Launch Alliance Delta II rocket is scheduled for Sept. 12, 2018, from Space Launch Complex-2 at Vandenberg. It will be the last for the venerable Delta II rocket. ICESat-2, which is being built and tested by Orbital ATK in Gilbert, Arizona, will carry a single instrument called the Advanced Topographic Laser Altimeter System, or ATLAS. The ATLAS instrument is being built and tested at NASA’s Goddard Space Flight Center in Greenbelt Maryland. Once in orbit, the satellite is designed to measure the height of a changing Earth, one laser pulse at a time, 10,000 laser pulses a second. ICESat-2 will help scientists investigate why, and how much, Earth’s frozen and icy areas, called the cryosphere, are changing.

Delta II ICESat-2 Fairing Cleaning and Sampling

NASA Image and Video Library

2018-04-06

On Friday, April 6, 2018, in NASA’s Building 8337 at Vandenberg Air Force Base in California, technicians and engineers check samples during cleaning of the payload fairing that will protect NASA's Ice, Cloud and land Elevation Satellite-2, or ICESat-2, satellite during launch. Liftoff atop a United Launch Alliance Delta II rocket is scheduled for Sept. 12, 2018, from Space Launch Complex-2 at Vandenberg. It will be the last for the venerable Delta II rocket. ICESat-2, which is being built and tested by Orbital ATK in Gilbert, Arizona, will carry a single instrument called the Advanced Topographic Laser Altimeter System, or ATLAS. The ATLAS instrument is being built and tested at NASA’s Goddard Space Flight Center in Greenbelt Maryland. Once in orbit, the satellite is designed to measure the height of a changing Earth, one laser pulse at a time, 10,000 laser pulses a second. ICESat-2 will help scientists investigate why, and how much, Earth’s frozen and icy areas, called the cryosphere, are changing.

Molecular Analysis of VanA Outbreak of Enterococcus faecium in Two Warsaw Hospitals: The Importance of Mobile Genetic Elements

PubMed Central

Wardal, Ewa; Markowska, Katarzyna; Żabicka, Dorota; Wróblewska, Marta; Giemza, Małgorzata; Mik, Ewa; Połowniak-Pracka, Hanna; Woźniak, Agnieszka; Hryniewicz, Waleria; Sadowy, Ewa

2014-01-01

Vancomycin-resistant Enterococcus faecium represents a growing threat in hospital-acquired infections. Two outbreaks of this pathogen from neighboring Warsaw hospitals have been analyzed in this study. Pulsed-field gel electrophoresis (PFGE) of SmaI-digested DNA, multilocus VNTR analysis (MLVA), and multilocus sequence typing (MLST) revealed a clonal variability of isolates which belonged to three main lineages (17, 18, and 78) of nosocomial E. faecium. All isolates were multidrug resistant and carried several resistance, virulence, and plasmid-specific genes. Almost all isolates shared the same variant of Tn1546 transposon, characterized by the presence of insertion sequence ISEf1 and a point mutation in the vanA gene. In the majority of cases, this transposon was located on 50 kb or 100 kb pRUM-related plasmids, which lacked, however, the axe-txe toxin-antitoxin genes. 100 kb plasmid was easily transferred by conjugation and was found in various clonal backgrounds in both institutions, while 50 kb plasmid was not transferable and occurred solely in MT159/ST78 strains that disseminated clonally in one institution. Although molecular data indicated the spread of VRE between two institutions or a potential common source of this alert pathogen, epidemiological investigations did not reveal the possible route by which outbreak strains disseminated. PMID:25003118

Performance Investigation of Proteomic Identification by HCD/CID Fragmentations in Combination with High/Low-Resolution Detectors on a Tribrid, High-Field Orbitrap Instrument

PubMed Central

Shen, Shichen; Sheng, Quanhu; Shyr, Yu; Qu, Jun

2016-01-01

The recently-introduced Orbitrap Fusion mass spectrometry permits various types of MS2 acquisition methods. To date, these different MS2 strategies and the optimal data interpretation approach for each have not been adequately evaluated. This study comprehensively investigated the four MS2 strategies: HCD-OT (higher-energy-collisional-dissociation with Orbitrap detection), HCD-IT (HCD with ion trap, IT), CID-IT (collision-induced-dissociation with IT) and CID-OT on Orbitrap Fusion. To achieve extensive comparison and identify the optimal data interpretation method for each technique, several search engines (SEQUEST and Mascot) and post-processing methods (score-based, PeptideProphet, and Percolator) were assessed for all techniques for the analysis of a human cell proteome. It was found that divergent conclusions could be made from the same dataset when different data interpretation approaches were used and therefore requiring a relatively fair comparison among techniques. Percolator was chosen for comparison of techniques because it performs the best among all search engines and MS2 strategies. For the analysis of human cell proteome using individual MS2 strategies, the highest number of identifications was achieved by HCD-OT, followed by HCD-IT and CID-IT. Based on these results, we concluded that a relatively fair platform for data interpretation is necessary to avoid divergent conclusions from the same dataset, and HCD-OT and HCD-IT may be preferable for protein/peptide identification using Orbitrap Fusion. PMID:27472422

Production of three-dimensional tissue-engineered cartilage through mutual fusion of chondrocyte pellets.

PubMed

Hoshi, K; Fujihara, Y; Mori, Y; Asawa, Y; Kanazawa, S; Nishizawa, S; Misawa, M; Numano, T; Inoue, H; Sakamoto, T; Watanabe, M; Komura, M; Takato, T

2016-09-01

In this study, the mutual fusion of chondrocyte pellets was promoted in order to produce large-sized tissue-engineered cartilage with a three-dimensional (3D) shape. Five pellets of human auricular chondrocytes were first prepared, which were then incubated in an agarose mold. After 3 weeks of culture in matrix production-promoting medium under 5.78g/cm(2) compression, the tissue-engineered cartilage showed a sufficient mechanical strength. To confirm the usefulness of these methods, a transplantation experiment was performed using beagles. Tissue-engineered cartilage prepared with 50 pellets of beagle chondrocytes was transplanted subcutaneously into the cell-donor dog for 2 months. The tissue-engineered cartilage of the beagles maintained a rod-like shape, even after harvest. Histology showed fair cartilage regeneration. Furthermore, 20 pellets were made and placed on a beta-tricalcium phosphate prism, and this was then incubated within the agarose mold for 3 weeks. The construct was transplanted into a bone/cartilage defect in the cell-donor beagle. After 2 months, bone and cartilage regeneration was identified on micro-computed tomography and magnetic resonance imaging. This approach involving the fusion of small pellets into a large structure enabled the production of 3D tissue-engineered cartilage that was close to physiological cartilage tissue in property, without conventional polyper scaffolds. Copyright © 2016. Published by Elsevier Ltd.

Particle Size Distributions Measured in the B757 Engine Plume During EXCAVATE

NASA Technical Reports Server (NTRS)

Sanders, Terry; Penko, Paul; Rivera, Monica; Culler, Steve

2005-01-01

The Experiment to Characterize Aircraft Volatile Aerosols and Trace Species Emissions (EXCAVATE) took place at NASA Langley Research Center during January 2002. This ground based study was conducted to examine the role of fuel sulfur content on particulate emissions. Size distributions as a function of engine operating conditions were measured in the exhaust plume of a B-757 at four downstream axial locations (1 m, 10 m, 25 m and 35 m). The engine was run on JP-5 with three different sulfur concentrations, 810 ppm, 1050 ppm, 1820 ppm; and was operated over a range of power settings from idle to near-full power. Zalabsky differential-mobility analyzers DMAS), Met One condensation-nuclei counters (CNCs), and a TSI 3022 condensation-particle counter (CPC) were used to measure the size distributions. The total number-count (particle concentration), number-based Emissions Index (EInumber) and mass-based Emissions Index (E1-J increased with fuel sulfur-content and engine pressure ratio (EPR). Count Mean Diameter (Ch4D) also increased with EPR yet remained fairly constant with fuel sulfur-content for a fixed location in the exhaust plume. Also the mode and CMD both increased with distance in the plume.

Single-Event Effects Ground Testing and On-Orbit Rate Prediction Methods: The Past, Present and Future

NASA Technical Reports Server (NTRS)

Reed, Robert A.; Kinnison, Jim; Pickel, Jim; Buchner, Stephen; Marshall, Paul W.; Kniffin, Scott; LaBel, Kenneth A.

2003-01-01

Over the past 27 years, or so, increased concern over single event effects in spacecraft systems has resulted in research, development and engineering activities centered around a better understanding of the space radiation environment, single event effects predictive methods, ground test protocols, and test facility developments. This research has led to fairly well developed methods for assessing the impact of the space radiation environment on systems that contain SEE sensitive devices and the development of mitigation strategies either at the system or device level.

Aerodynamic studies of delta-wing shuttle orbiters. Part 1: Low speed

NASA Technical Reports Server (NTRS)

Freeman, D. C., Jr.; Ellison, J. C.

1972-01-01

Numerous wind tunnel tests conducted on the evolving delta-wing orbiters have generated a fairly large aerodynamic data base over the entire entry operation range of these vehicles. A limited assessment is made of some of the aerodynamics of the current HO type orbiters, and several specific problem areas selected from the broad data base are discussed. These include, from a subsonic viewpoint, discussions of trim drag effect; effects of the installation of main rocket engine nozzles, OMS and RCS packages, Reynolds number effects, lateral-directional stability characteristics, and landing characteristics.

Low-speed wind tunnel performance of high-speed counterrotation propellers at angle-of-attack

NASA Technical Reports Server (NTRS)

Hughes, Christopher E.; Gazzaniga, John A.

1989-01-01

The low-speed aerodynamic performance characteristics of two advanced counterrotation pusher-propeller configurations with cruise design Mach numbers of 0.72 were investigated in the NASA Lewis 9- by 15-Foot Low-Speed Wind Tunnel. The tests were conducted at Mach number 0.20, which is representative of the aircraft take-off/landing flight regime. The investigation determined the effect of nonuniform inflow on the propeller performance characteristics for several blade angle settings and a range of rotational speeds. The inflow was varied by yawing the propeller model to angle-of-attack by as much as plus or minus 16 degrees and by installing on the counterrotation propeller test rig near the propeller rotors a model simulator of an aircraft engine support pylon and fuselage. The results of the investigation indicated that the low-speed performance of the counterrotation propeller configurations near the take-off target operating points were reasonable and were fairly insensitive to changes in model angle-of-attack without the aircraft pylon/fuselage simulators installed on the propeller test rig. When the aircraft pylon/fuselage simulators were installed, small changes in propeller performance were seen at zero angle-of-attack, but fairly large changes in total power coefficient and very large changes of aft-to-forward-rotor torque ratio were produced when the propeller model was taken to angle-of-attack. The propeller net efficiency, though, was fairly insensitive to any changes in the propeller flowfield conditions near the take-off target operating points.

KSC-98pc1354

NASA Image and Video Library

1998-10-16

KENNEDY SPACE CENTER, FLA. -- On Launch Pad 17A at Cape Canaveral Air Station, workers maneuver the second half of the fairing to encapsulate Deep Space 1, targeted for launch aboard a Boeing Delta II rocket on Oct. 24. The first flight in NASA's New Millennium Program, Deep Space 1 is designed to validate 12 new technologies for scientific space missions of the next century, including the engine. Propelled by the gas xenon, the engine is being flight-tested for future deep space and Earth-orbiting missions. Deceptively powerful, the ion drive emits only an eerie blue glow as ionized atoms of xenon are pushed out of the engine. While slow to pick up speed, over the long haul it can deliver 10 times as much thrust per pound of fuel as liquid or solid fuel rockets. Other onboard experiments include software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. Deep Space 1 will complete most of its mission objectives within the first two months, but will also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999

KSC-98pc1355

NASA Image and Video Library

1998-10-16

KENNEDY SPACE CENTER, FLA. -- On Launch Pad 17A at Cape Canaveral Air Station, workers check make a final check of the fairing encapsulating Deep Space 1, which is targeted for launch aboard a Boeing Delta II rocket on Oct. 24. The first flight in NASA's New Millennium Program, Deep Space 1 is designed to validate 12 new technologies for scientific space missions of the next century, including the engine. Propelled by the gas xenon, the engine is being flight-tested for future deep space and Earth-orbiting missions. Deceptively powerful, the ion drive emits only an eerie blue glow as ionized atoms of xenon are pushed out of the engine. While slow to pick up speed, over the long haul it can deliver 10 times as much thrust per pound of fuel as liquid or solid fuel rockets. Other onboard experiments include software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. Deep Space 1 will complete most of its mission objectives within the first two months, but will also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999

KSC-98pc1346

NASA Image and Video Library

1998-10-16

KENNEDY SPACE CENTER, FLA. -- On Launch Pad 17A at Cape Canaveral Air Station, workers begin encapsulating Deep Space 1 with the fairing (right side). Targeted for launch aboard a Boeing Delta 7326 rocket on Oct. 25, Deep Space 1 is the first flight in NASA's New Millennium Program, and is designed to validate 12 new technologies for scientific space missions of the next century, including the engine. Propelled by the gas xenon, the engine is being flight-tested for future deep space and Earth-orbiting missions. Deceptively powerful, the ion drive emits only an eerie blue glow as ionized atoms of xenon are pushed out of the engine. While slow to pick up speed, over the long haul it can deliver 10 times as much thrust per pound of fuel as liquid or solid fuel rockets. Other onboard experiments include software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. Deep Space 1 will complete most of its mission objectives within the first two months, but will also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999

Educational Outreach for Astrobiology

NASA Astrophysics Data System (ADS)

Kadooka, M.; Meech, K.

2009-12-01

Astrobiology, the search for life in the universe, has fascinating research areas that can excite students and teachers about science. Its integrative nature, relating to astronomy, geology, oceanography, physics, and chemistry, can be used to encourage students to pursue physical sciences careers. Since 2004, the University of Hawaii NASA Astrobiology Institute (NAI) team scientists have shared their research with secondary teachers at our ALI’I national teacher program to promote the inclusion of astrobiology topics into science courses. Since 2007, our NAI team has co-sponsored the HI STAR program for Hawaii’s middle and high school students to work on authentic astronomy research projects and to be mentored by astronomers. The students get images of asteroids, comets, stars, and extrasolar planets from the Faulkes Telescope North located at Haleakala Observatories on the island of Maui and owned by Las Cumbres Observatory Global Telescope network. They also do real time observing with DeKalb Observatory telescope personally owned by Donn Starkey who willing allows any student access to his telescope. Student project results include awards at the Hawaii State Science Fair and the Intel International Science and Engineering Fair. We believe that research experience stimulates these students to select STEM (science, technology, engineering and mathematics) majors upon entering college so a longitudinal study is being done. Plans are underway with California and Hawaii ALI’I teachers cooperating on a joint astronomy classroom project. International collaborations with Brazil, Portugal, and Italy astronomers have begun. We envision joint project between hemispheres and crossing time zones. The establishment of networking teachers, astronomers, students and educator liaisons will be discussed.

Optimizing Power–Frequency Droop Characteristics of Distributed Energy Resources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guggilam, Swaroop S.; Zhao, Changhong; Dall Anese, Emiliano

This paper outlines a procedure to design power-frequency droop slopes for distributed energy resources (DERs) installed in distribution networks to optimally participate in primary frequency response. In particular, the droop slopes are engineered such that DERs respond in proportion to their power ratings and they are not unfairly penalized in power provisioning based on their location in the distribution network. The main contribution of our approach is that a guaranteed level of frequency regulation can be guaranteed at the feeder head, while ensuring that the outputs of individual DERs conform to some well-defined notion of fairness. The approach we adoptmore » leverages an optimization-based perspective and suitable linearizations of the power-flow equations to embed notions of fairness and information regarding the physics of the power flows within the distribution network into the droop slopes. Time-domain simulations from a differential algebraic equation model of the 39-bus New England test-case system augmented with three instances of the IEEE 37-node distribution-network with frequency-sensitive DERs are provided to validate our approach.« less

The Drag of Airplane Wheels, Wheel Fairings, and Landing Gears - I

NASA Technical Reports Server (NTRS)

Herrnstein, William H; Biermann, David

1935-01-01

This report presents the results of tests made in the 7-by 10-foot wind tunnel and in the 20-foot tunnel of the National Advisory Committee for Aeronautics to determine the drag of a number of airplane wheels, wheel fairings, and landing gears designed or selected for an airplane of 3,000 pounds gross weight. All tests were made on full-size models; those in the 7-by 10-foot tunnel were made at air speeds up to 80 miles per hour and those in the 20-foot tunnel were made at air speeds up to 100 miles per hour. Although most of the landing-gear tests were made in conjunction with a fuselage and at 0 degree pitch angle, some of the tests were made in conjunction with fuselage plus wings and a radial air-cooled engine and at pitch angles from -5 degrees to 6 degrees to obtain an indication of the general effect of these various items on landing-gear drag. All tests were made in the absence of propeller slipstream.

A linear acoustic model for intake wave dynamics in IC engines

NASA Astrophysics Data System (ADS)

Harrison, M. F.; Stanev, P. T.

2004-01-01

In this paper, a linear acoustic model is described that has proven useful in obtaining a better understanding of the nature of acoustic wave dynamics in the intake system of an internal combustion (IC) engine. The model described has been developed alongside a set of measurements made on a Ricardo E6 single cylinder research engine. The simplified linear acoustic model reported here produces a calculation of the pressure time-history in the port of an IC engine that agrees fairly well with measured data obtained on the engine fitted with a simple intake system. The model has proved useful in identifying the role of pipe resonance in the intake process and has led to the development of a simple hypothesis to explain the structure of the intake pressure time history: the early stages of the intake process are governed by the instantaneous values of the piston velocity and the open area under the valve. Thereafter, resonant wave action dominates the process. The depth of the early depression caused by the moving piston governs the intensity of the wave action that follows. A pressure ratio across the valve that is favourable to inflow is maintained and maximized when the open period of the valve is such to allow at least, but no more than, one complete oscillation of the pressure at its resonant frequency to occur while the valve is open.

Wind tunnel investigation of simulated helicopter engine exhaust interacting with windstream

NASA Technical Reports Server (NTRS)

Shaw, C. S.; Wilson, J. C.

1974-01-01

A wind tunnel investigation of the windstream-engine exhaust flow interaction on a light observation helicopter model has been conducted in the Langley V/STOL tunnel. The investigation utilized flow visualization techniques to determine the cause to determine the cause of exhaust shield overheating during cruise and to find a means of eliminating the problem. Exhaust flow attachment to the exhaust shield during cruise was found to cause the overheating. Several flow-altering devices were evaluated to find a suitable way to correct the problem. A flow deflector located on the model cowling upstream of the exhaust in addition to aerodynamic shield fairings provided the best solution. Also evaluated was heat transfer concept employing pin fins to cool future exhaust hardware. The primary flow visualization technique used in the investigation was a newly developed system employing neutrally buoyant helium-filled bubbles. The resultant flow patterns were recorded on motion picture film and on television magnetic tape.

An advanced search engine for patent analytics in medicinal chemistry.

PubMed

Pasche, Emilie; Gobeill, Julien; Teodoro, Douglas; Gaudinat, Arnaud; Vishnykova, Dina; Lovis, Christian; Ruch, Patrick

2012-01-01

Patent collections contain an important amount of medical-related knowledge, but existing tools were reported to lack of useful functionalities. We present here the development of TWINC, an advanced search engine dedicated to patent retrieval in the domain of health and life sciences. Our tool embeds two search modes: an ad hoc search to retrieve relevant patents given a short query and a related patent search to retrieve similar patents given a patent. Both search modes rely on tuning experiments performed during several patent retrieval competitions. Moreover, TWINC is enhanced with interactive modules, such as chemical query expansion, which is of prior importance to cope with various ways of naming biomedical entities. While the related patent search showed promising performances, the ad-hoc search resulted in fairly contrasted results. Nonetheless, TWINC performed well during the Chemathlon task of the PatOlympics competition and experts appreciated its usability.

OJPOT: online judge & practice oriented teaching idea in programming courses

NASA Astrophysics Data System (ADS)

Wang, Gui Ping; Chen, Shu Yu; Yang, Xin; Feng, Rui

2016-05-01

Practical abilities are important for students from majors including Computer Science and Engineering, and Electrical Engineering. Along with the popularity of ACM International Collegiate Programming Contest (ACM/ICPC) and other programming contests, online judge (OJ) websites achieve rapid development, thus providing a new kind of programming practice, i.e. online practice. Due to fair and timely feedback results from OJ websites, online practice outperforms traditional programming practice. In order to promote students' practical abilities in programming and algorithm designing, this article presents a novel teaching idea, online judge & practice oriented teaching (OJPOT). OJPOT is applied to Programming Foundation course. OJPOT cultivates students' practical abilities through various kinds of programming practice, such as programming contests, online practice and course project. To verify the effectiveness of this novel teaching idea, this study conducts empirical research. The experimental results show that OJPOT works effectively in enhancing students' practical abilities compared with the traditional teaching idea.

The resources of Mars for human settlement

NASA Astrophysics Data System (ADS)

Meyer, T. R.; McKay, C. P.

1989-04-01

Spacecraft exploration of Marshas shown that the essential resources necessary for life support are present on the Martian surface. The key life-support compounds O2, N2, and H2O are available on Mars. The soil could be used as radiation shielding and could provide many useful industrial and construction materials. Compounds with high chemical energy, such as rocket fuels, can be manufactured in-situ on Mars. Solar power, and possibly wind power, are available and practical on Mars. Preliminary engineering studies indicate that fairly autonomous processes can be designed to extract and stockpile Martian consumables.

Lift Recovery for AFC-Enabled High Lift System

NASA Technical Reports Server (NTRS)

Shmilovich, Arvin; Yadlin, Yoram; Dickey, Eric D.; Gissen, Abraham N.; Whalen, Edward A.

2017-01-01

This project is a continuation of the NASA AFC-Enabled Simplified High-Lift System Integration Study contract (NNL10AA05B) performed by Boeing under the Fixed Wing Project. This task is motivated by the simplified high-lift system, which is advantageous due to the simpler mechanical system, reduced actuation power and lower maintenance costs. Additionally, the removal of the flap track fairings associated with conventional high-lift systems renders a more efficient aerodynamic configuration. Potentially, these benefits translate to a approx. 2.25% net reduction in fuel burn for a twin-engine, long-range airplane.

The resources of Mars for human settlement

NASA Technical Reports Server (NTRS)

Meyer, Thomas R.; Mckay, Christopher P.

1989-01-01

Spacecraft exploration of Marshas shown that the essential resources necessary for life support are present on the Martian surface. The key life-support compounds O2, N2, and H2O are available on Mars. The soil could be used as radiation shielding and could provide many useful industrial and construction materials. Compounds with high chemical energy, such as rocket fuels, can be manufactured in-situ on Mars. Solar power, and possibly wind power, are available and practical on Mars. Preliminary engineering studies indicate that fairly autonomous processes can be designed to extract and stockpile Martian consumables.

The NASA Goddard Space Flight Center Virtual Science Fair

NASA Technical Reports Server (NTRS)

Bolognese, Jeff; Walden, Harvey; Obenschain, Arthur F. (Technical Monitor)

2002-01-01

This report describes the development of the NASA Goddard Space Flight Center Virtual Science Fair, including its history and outgrowth from the traditional regional science fairs supported by NASA. The results of the 1999 Virtual Science Fair pilot program, the mechanics of running the 2000 Virtual Science Fair and its results, and comments and suggestions for future Virtual Science Fairs are provided. The appendices to the report include the original proposal for this project, the judging criteria, the user's guide and the judge's guide to the Virtual Science Fair Web site, the Fair publicity brochure and the Fair award designs, judges' and students' responses to survey questions about the Virtual Science Fair, and lists of student entries to both the 1999 and 2000 Fairs.

A Review of the NASA MLAS Flight Demonstration

NASA Technical Reports Server (NTRS)

Taylor, Anthony P.; Kelley, Christopher; Manger, Eldred; Peterson, David; Hahn, Jeffrey; Yuchnovicz, Daniel

2011-01-01

The NASA Engineering and Safety Center (NESC) has tested the Max Launch Abort System (MLAS) as a risk-mitigation design should problems arise with the baseline Orion spacecraft launch abort design. The Max in MLAS is not Maximum, but rather dedicated to Max Faget, the renowned NASA Spacecraft designer. In July 2009, the mission was flown, with great success, from the NASA Wallops Flight Facility. The MLAS flight test vehicle prototype consists of a boost skirt, coast skirt, and the MLAS fairing itself, which houses an Orion Command Module (CM) boilerplate. The objective of the MLAS flight test is to reorient the fairing with the CM, weighing approximately 29,000 lbs and traveling 290 fps, 180 degrees to an orientation suitable for the release of the CM during a pad abort or low altitude abort. The boost and coast skirts provide the necessary thrust and stability to establish the flight test conditions and are released prior to the reorientation of the fairing. A secondary test objective after successful release of the CM from the fairing is to demonstrate the removal of the CM forward bay cover (FBC) with the CM drogue parachutes, and subsequent deployment of the CM main parachutes attached to the FBC. Although multiple parachute deployments are used in the MLAS flight test vehicle to complete its objective, there are only two parachute types employed in the flight test. Five of the nine parachutes used for MLAS are 27.6 ft DO ribbon parachutes already proven as a spin/stall parachute for military aircraft, and the remaining four are G-12 cargo parachutes modified for increased strength and reefing. This paper presents an overview of the 27.6 ft DO ribbon parachute system employed on the MLAS flight test vehicle for coast skirt separation, fairing reorientation, and as CM drogue parachutes. Discussion will include: the process used to select this design; descriptions of all components of the parachute system; the minor modifications necessary to adapt the parachute to the MLAS program; the techniques used to analyze the parachute for the multiple roles it performs including discussions of how the evolution of the program affected parachute usage and analysis; a summary of the results of the highly successful flight test, including video of the flight test; and an overview of the subsequent post-test analysis.

Impact of problem finding on the quality of authentic open inquiry science research projects

NASA Astrophysics Data System (ADS)

Labanca, Frank

2008-11-01

Problem finding is a creative process whereby individuals develop original ideas for study. Secondary science students who successfully participate in authentic, novel, open inquiry studies must engage in problem finding to determine viable and suitable topics. This study examined problem finding strategies employed by students who successfully completed and presented the results of their open inquiry research at the 2007 Connecticut Science Fair and the 2007 International Science and Engineering Fair. A multicase qualitative study was framed through the lenses of creativity, inquiry strategies, and situated cognition learning theory. Data were triangulated by methods (interviews, document analysis, surveys) and sources (students, teachers, mentors, fair directors, documents). The data demonstrated that the quality of student projects was directly impacted by the quality of their problem finding. Effective problem finding was a result of students using resources from previous, specialized experiences. They had a positive self-concept and a temperament for both the creative and logical perspectives of science research. Successful problem finding was derived from an idiosyncratic, nonlinear, and flexible use and understanding of inquiry. Finally, problem finding was influenced and assisted by the community of practicing scientists, with whom the students had an exceptional ability to communicate effectively. As a result, there appears to be a juxtaposition of creative and logical/analytical thought for open inquiry that may not be present in other forms of inquiry. Instructional strategies are suggested for teachers of science research students to improve the quality of problem finding for their students and their subsequent research projects.

A Curriculum for a Three Year High School Science Research Program

NASA Astrophysics Data System (ADS)

Darytichen, F.; Danch, J.

2003-12-01

A three-year high school science research program has been taught in Woodbridge Township School District - Woodbridge, New Jersey, since 1987. The program's focus is to foster originial science research projects for high school students that have shown an aptitude and an interest in science. Students are instructed in basic research skills, including developing and conducting original research projects, statistical analysis, scientific writing, and presentation of research at local and national symposia, and science fairs. Upon completion of the third year all students are required to submit a paper, suitable for journal publication, detailing their research. Participating students have gone on to win awards with Westinghouse, Intel, The National Junior Science and Humanities Symposium, the International Science and Engineering Fair, New Jersey Academy of Sciences, and local and regional science fairs and symposia. Participating teachers have been recoginized by the Sigma Xi Research Society of Rutgers University for excellence in science teaching. New Jersey awarded the curriulum a Best Practice Award for 2003. Goals and strategies of the curriculum are detailed in a guide written for the courses. Professional development for the courses and resources for mentoring programs are the responsibility of the District Science Supervisor, and have been fostered over the years with the assistance of local colleges and universities including Rutgers Univesity, Monmouth University, University of Medicine and Dentistry of New Jersey, Liberty Science Center of New Jersey's Partners in Science Program, as well as local industries including Hatco Corporation, Merck Corporation, Englehard Corporation, and Lucent Technologies. Science Research teachers have conducted developmental workshops for school districts interested in implementing similar curricula.

The NASA Goddard Space Flight Center Virtual Science Fair

NASA Technical Reports Server (NTRS)

Bolognese, Jeff; Walden, Harvey; Obenschain, Arthur F. (Technical Monitor)

2001-01-01

This report describes the development of the NASA Goddard Space Flight Center Virtual Science Fair, including its history and outgrowth from the traditional regional science fairs supported by NASA. The results of the 1999 Virtual Science Fair pilot program, the mechanics of running the 2000 Virtual Science Fair and its results, and comments and suggestions for future Virtual Science Fairs are provided. The appendices to the report contain supporting documentation, including the original proposal for this project, the judging criteria, the user's guide and the judge's guide to the Virtual Science Fair Web site, the Fair publicity brochure and the Fair award designs, judges' and students' responses to survey questions about the Virtual Science Fair, and lists of student entries to both the 1999 and 2000 Fairs.

Deep Space 1 is encapsulated on launch pad

NASA Technical Reports Server (NTRS)

1998-01-01

On Launch Pad 17A at Cape Canaveral Air Station, released from its protective payload transportation container, Deep Space 1 waits to have the fairing attached before launch. Targeted for launch aboard a Boeing Delta 7326 rocket on Oct. 25, Deep Space 1 is the first flight in NASA's New Millennium Program, and is designed to validate 12 new technologies for scientific space missions of the next century, including the engine. Propelled by the gas xenon, the engine is being flight-tested for future deep space and Earth-orbiting missions. Deceptively powerful, the ion drive emits only an eerie blue glow as ionized atoms of xenon are pushed out of the engine. While slow to pick up speed, over the long haul it can deliver 10 times as much thrust per pound of fuel as liquid or solid fuel rockets. Other onboard experiments include software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. Deep Space 1 will complete most of its mission objectives within the first two months, but will also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999.

KSC-98pc1345

NASA Image and Video Library

1998-10-16

KENNEDY SPACE CENTER, FLA. -- On Launch Pad 17A at Cape Canaveral Air Station, released from its protective payload transportation container, Deep Space 1 waits to have the fairing attached before launch. Targeted for launch aboard a Boeing Delta 7326 rocket on Oct. 25, Deep Space 1 is the first flight in NASA's New Millennium Program, and is designed to validate 12 new technologies for scientific space missions of the next century, including the engine. Propelled by the gas xenon, the engine is being flight-tested for future deep space and Earth-orbiting missions. Deceptively powerful, the ion drive emits only an eerie blue glow as ionized atoms of xenon are pushed out of the engine. While slow to pick up speed, over the long haul it can deliver 10 times as much thrust per pound of fuel as liquid or solid fuel rockets. Other onboard experiments include software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. Deep Space 1 will complete most of its mission objectives within the first two months, but will also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999

KSC-98pc1347

NASA Image and Video Library

1998-10-16

KENNEDY SPACE CENTER, FLA. -- On Launch Pad 17A at Cape Canaveral Air Station, workers maneuver part of the fairing (viewed from the inside) to encapsulate Deep Space 1. Targeted for launch aboard a Boeing Delta 7326 rocket on Oct. 25, Deep Space 1 is the first flight in NASA's New Millennium Program, and is designed to validate 12 new technologies for scientific space missions of the next century, including the engine. Propelled by the gas xenon, the engine is being flight-tested for future deep space and Earth-orbiting missions. Deceptively powerful, the ion drive emits only an eerie blue glow as ionized atoms of xenon are pushed out of the engine. While slow to pick up speed, over the long haul it can deliver 10 times as much thrust per pound of fuel as liquid or solid fuel rockets. Other onboard experiments include software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. Deep Space 1 will complete most of its mission objectives within the first two months, but will also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999

41 CFR 102-33.400 - How must we report to FAIRS?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION PERSONAL PROPERTY 33-MANAGEMENT OF... System (fairs) § 102-33.400 How must we report to FAIRS? You must report to FAIRS electronically through a secure Web interface to the FAIRS application on the Internet. For information on becoming a FAIRS...

How Do We Go about Investigating Test Fairness?

ERIC Educational Resources Information Center

Xi, Xiaoming

2010-01-01

Previous test fairness frameworks have greatly expanded the scope of fairness, but do not provide a means to fully integrate fairness investigations and set priorities. This article proposes an approach to guide practitioners on fairness research and practices. This approach treats fairness as an aspect of validity and conceptualizes it as…

Self-presentation on the Web: agencies serving abused and assaulted women.

PubMed

Sorenson, Susan B; Shi, Rui; Zhang, Jingwen; Xue, Jia

2014-04-01

We examined the content and usability of the Web sites of agencies serving women victims of violence. We entered the names of a systematic 10% sample of 3774 agencies listed in 2 national directories into a search engine. We took (in April 2012) and analyzed screenshots of the 261 resulting home pages and the readability of 193 home and first-level pages. Victims (94%) and donors (68%) were the primary intended audiences. About one half used social media and one third provided cues to action. Almost all (96.4%) of the Web pages were rated "fairly difficult" to "very confusing" to read, and 81.4% required more than a ninth-grade education to understand. The service and marketing functions were met fairly well by the agency home pages, but usability (particularly readability and offer of a mobile version) and efforts to increase user safety could be improved. Internet technologies are an essential platform for public health. They are particularly useful for reaching people with stigmatized health conditions because of the anonymity allowed. The one third of agencies that lack a Web site will not reach the substantial portion of the population that uses the Internet to find health information and other resources.

InSight Encapsulation

NASA Image and Video Library

2018-04-16

In the Astrotech facility at Vandenberg Air Force Base in California, technicians and engineers encapsulate NASA's Interior Exploration using Seismic Investigations, Geodesy and Heat Transport, or InSight, Mars lander in its payload fairing. InSight will be the first mission to look deep beneath the Martian surface. It will study the planet's interior by measuring its heat output and listen for marsquakes. The spacecraft will use the seismic waves generated by marsquakes to develop a map of the planet’s deep interior. The resulting insight into Mars’ formation will provide a better understanding of how other rocky planets, including Earth, were created. InSight is scheduled for liftoff May 5, 2018.

KSC-2009-1712

NASA Image and Video Library

2009-02-18

VANDENBERG AIR FORCE BASE, Calif. -- On Launch Complex 576-E at Vandenberg Air Force Base in California, Orbital Sciences Engineer Jose Castillo (right) maneuvers the bucket truck into position over the fairing access door on NASA's Orbiting Carbon Observatory, or OCO. Technician Mark Neuse feels for the payload access door through the environmental cover. OCO is scheduled for launch the Taurus rocket Feb. 24 from Vandenberg. The spacecraft will collect precise global measurements of carbon dioxide (CO2) in the Earth's atmosphere. Scientists will analyze OCO data to improve our understanding of the natural processes and human activities that regulate the abundance and distribution of this important greenhouse gas. Photo credit: NASA/Richard Nielsen, VAFB

Update on the NASA Glenn PSL Ice Crystal Cloud Characterization (2016)

NASA Technical Reports Server (NTRS)

Van Zante, J.; Bencic, T.; Ratvasky, Thomas P.; Struk, Peter M.

2016-01-01

NASA Glenn's Propulsion Systems Laboratory (PSL) is an altitude engine research test facility capable of producing ice-crystal and supercooled liquid clouds. The cloud characterization parameter space is fairly large and complex, but the phase of the cloud seems primarily governed by wet bulb temperature. The presentation will discuss some of the issues uncovered through four cloud characterization efforts to date, as well as some of instrumentation that has been used to characterize cloud parameters including cloud uniformity, bulk total water content, median volumetric diameter and max-diameter, percent freeze-out, relative humidity, and an update on the NASA Glenn PSL Ice Crystal Cloud Characterization (2016).

State of STEM (SoSTEM) Address

NASA Image and Video Library

2014-01-29

Panels participants, from left, Dr. John P. Holdren, Assistant to the President for Science and Technology and Director of the White House Office of Science & Technology Policy, former White House Science Fair participant Joey Hudy, Environmentalist and third-year law student at Elon University School of Law Tyrone Davis, White House innovation expert Cristin Dorgelo, and Defense Advanced Research Projects Agency (DARPA) Gill Pratt, take a question from the audience during the annual White House State of Science, Technology, Engineering, and Math (SoSTEM) address, Wednesday, Jan. 29, 2014, in the South Court Auditorium in the Eisenhower Executive Office Building on the White House complex in Washington. Photo Credit: (NASA/Bill Ingalls)

7 CFR 51.494b - Fairly well netted.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well netted. 51.494b Section 51.494b....494b Fairly well netted. Fairly well netted means that to an extent characteristic of the variety the cantaloup is fairly well covered with fairly good netting. [26 FR 2217, Mar. 16, 1961. Redesignated at 27 FR...

7 CFR 51.494b - Fairly well netted.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well netted. 51.494b Section 51.494b....494b Fairly well netted. Fairly well netted means that to an extent characteristic of the variety the cantaloup is fairly well covered with fairly good netting. [26 FR 2217, Mar. 16, 1961. Redesignated at 27 FR...

Social information affects adults' evaluation of fairness in distributions: An ERP approach.

PubMed

Ishikawa, Mitsuhiko; Park, Yun-Hee; Kitazaki, Michiteru; Itakura, Shoji

2017-01-01

The sense of fairness has been observed in early infancy. Because many studies of fairness in adults have used economic games such as the Ultimatum Game, it has been difficult to compare fairness between adults and infants. Further, recent studies have suggested that social information about actors who behave fairly or unfairly may influence the judgement of fairness in infants. Therefore, to compare the sense of fairness between infants and adults, the study using paradigm in infant research is required. We examined how social information about two characters, either prosocial or antisocial, affects the event-related potential response (ERP) to fair or unfair resource distributions in adults. In the habituation phase, participants were informed about characters' social information through their actions. One character then distributed resources fairly or unfairly, and ERP was measured at the end of the distribution. Data from eighteen adult participants were analysed. A significant interaction of social information and fairness was found for late positive potential (LPP), but a post-hoc t test revealed a significant difference between fair and unfair conditions only for actions of the antisocial character. We found that LPP can reflect the sense of fairness affected by social information. Comparison with infant studies suggests that the sense of fairness may change during development.

7 CFR 51.772 - Fairly smooth texture.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Definitions § 51.772 Fairly smooth texture. Fairly smooth texture means that the skin is fairly thin and not coarse for the variety and size of the fruit. “Fairly thin” means that the skin thickness does not...

7 CFR 51.772 - Fairly smooth texture.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Definitions § 51.772 Fairly smooth texture. Fairly smooth texture means that the skin is fairly thin and not coarse for the variety and size of the fruit. “Fairly thin” means that the skin thickness does not...

An Experimental Investigation of Helicopter Rotor Hub Fairing Drag Characteristics

NASA Technical Reports Server (NTRS)

Sung, D. Y.; Lance, M. B.; Young, L. A.; Stroub, R. H.

1989-01-01

A study was done in the NASA 14- by 22-Foot Wind Tunnel at Langley Research Center on the parasite drag of different helicopter rotor hub fairings and pylons. Parametric studies of hub-fairing camber and diameter were conducted. The effect of hub fairing/pylon clearance on hub fairing/pylon mutual interference drag was examined in detail. Force and moment data are presented in tabular and graphical forms. The results indicate that hub fairings with a circular-arc upper surface and a flat lower surface yield maximum hub drag reduction; and clearance between the hub fairing and pylon induces high mutual-interference drag and diminishes the drag-reduction benefit obtained using a hub fairing with a flat lower surface. Test data show that symmetrical hub fairings with circular-arc surfaces generate 74 percent more interference drag than do cambered hub fairings with flat lower surfaces, at moderate negative angle of attack.

DOE Office of Scientific and Technical Information (OSTI.GOV)

David, Aurelien; Fini, Paul T.; Houser, Kevin W.

We have developed a two-measure system for evaluating light sources’ color rendition that builds upon conceptual progress of numerous researchers over the last two decades. The system quantifies the color fidelity and color gamut (change in object chroma) of a light source in comparison to a reference illuminant. The calculations are based on a newly developed set of reflectance data from real samples uniformly distributed in color space (thereby fairly representing all colors) and in wavelength space (thereby precluding artificial optimization of the color rendition scores by spectral engineering). The color fidelity score R f is an improved version ofmore » the CIE color rendering index. The color gamut score R g is an improved version of the Gamut Area Index. In combination, they provide two complementary assessments to guide the optimization of future light sources. This method summarizes the findings of the Color Metric Task Group of the Illuminating Engineering Society of North America (IES). It is adopted in the upcoming IES TM-30-2015, and is proposed for consideration with the International Commission on Illumination (CIE).« less

Energy efficient engine: Turbine transition duct model technology report

NASA Technical Reports Server (NTRS)

Leach, K.; Thurlin, R.

1982-01-01

The Low-Pressure Turbine Transition Duct Model Technology Program was directed toward substantiating the aerodynamic definition of a turbine transition duct for the Energy Efficient Engine. This effort was successful in demonstrating an aerodynamically viable compact duct geometry and the performance benefits associated with a low camber low-pressure turbine inlet guide vane. The transition duct design for the flight propulsion system was tested and the pressure loss goal of 0.7 percent was verified. Also, strut fairing pressure distributions, as well as wall pressure coefficients, were in close agreement with analytical predictions. Duct modifications for the integrated core/low spool were also evaluated. The total pressure loss was 1.59 percent. Although the increase in exit area in this design produced higher wall loadings, reflecting a more aggressive aerodynamic design, pressure profiles showed no evidence of flow separation. Overall, the results acquired have provided pertinent design and diagnostic information for the design of a turbine transition duct for both the flight propulsion system and the integrated core/low spool.

Guard House at the Aircraft Engine Research Laboratory

NASA Image and Video Library

1945-08-21

A vehicle leaves the National Advisory Committee for Aeronautics (NACA) Aircraft Engine Research Laboratory on August 14, 1945. At 7 p.m. that evening President Truman announced that Japan had accepted terms for surrender and World War II was over. The end of the war brought significant changes for the laboratory. The NACA would cease its troubleshooting of military aircraft and return to research. Researchers would increase their efforts to address the new technologies that emerged during the war. The entire laboratory was reorganized in October to better investigate turbojets, ramjets, and rockets. The guard house sat on the main entrance to the laboratory off of Brookpark Road. The building was fairly small and easily crowded. In the early 1960s a new security facility was built several hundred feet beyond the original guard house. The original structure remained in place for several years but was not utilized. The subsequent structure was replaced in 2011 by a new building and entrance configuration.

Curvature, metric and parametrization of origami tessellations: theory and application to the eggbox pattern.

PubMed

Nassar, H; Lebée, A; Monasse, L

2017-01-01

Origami tessellations are particular textured morphing shell structures. Their unique folding and unfolding mechanisms on a local scale aggregate and bring on large changes in shape, curvature and elongation on a global scale. The existence of these global deformation modes allows for origami tessellations to fit non-trivial surfaces thus inspiring applications across a wide range of domains including structural engineering, architectural design and aerospace engineering. The present paper suggests a homogenization-type two-scale asymptotic method which, combined with standard tools from differential geometry of surfaces, yields a macroscopic continuous characterization of the global deformation modes of origami tessellations and other similar periodic pin-jointed trusses. The outcome of the method is a set of nonlinear differential equations governing the parametrization, metric and curvature of surfaces that the initially discrete structure can fit. The theory is presented through a case study of a fairly generic example: the eggbox pattern. The proposed continuous model predicts correctly the existence of various fittings that are subsequently constructed and illustrated.

Curvature, metric and parametrization of origami tessellations: theory and application to the eggbox pattern

NASA Astrophysics Data System (ADS)

Nassar, H.; Lebée, A.; Monasse, L.

2017-01-01

Origami tessellations are particular textured morphing shell structures. Their unique folding and unfolding mechanisms on a local scale aggregate and bring on large changes in shape, curvature and elongation on a global scale. The existence of these global deformation modes allows for origami tessellations to fit non-trivial surfaces thus inspiring applications across a wide range of domains including structural engineering, architectural design and aerospace engineering. The present paper suggests a homogenization-type two-scale asymptotic method which, combined with standard tools from differential geometry of surfaces, yields a macroscopic continuous characterization of the global deformation modes of origami tessellations and other similar periodic pin-jointed trusses. The outcome of the method is a set of nonlinear differential equations governing the parametrization, metric and curvature of surfaces that the initially discrete structure can fit. The theory is presented through a case study of a fairly generic example: the eggbox pattern. The proposed continuous model predicts correctly the existence of various fittings that are subsequently constructed and illustrated.

Approach to Modeling Boundary Layer Ingestion Using a Fully Coupled Propulsion-RANS Model

NASA Technical Reports Server (NTRS)

Gray, Justin; Mader, Charles A.; Kenway, Gaetan K. W.; Martins, Joaquim R. R. A.

2017-01-01

Although boundary layer ingestion (BLI), or wake ingestion, is commonly applied in marine propulsion applications, it has not yet seen wide-spread adoption in aircraft applications. However, recent studies have predicted that BLI offers a potential for a 10 reduction in aircraft fuel burn, even on a fairly traditional aircraft configuration. This dramatic reduction in fuel burn is achieved via tight integration of the propulsion system and airframe aerodynamics, but actually realizing such large performance gains will require modifying the aircraft design process to account for this integration. Traditionally, in aircraft design, the airframe and the propulsion system are designed separately and then the engine sizing is managed with a rubber-engine approach. This works when the propulsion system is placed in the free-stream air, away from the aerodynamic influence of the airframe, and it is reasonable to assume that small changes to either system won't have a strong impact on the other.

Coding efficiency of AVS 2.0 for CBAC and CABAC engines

NASA Astrophysics Data System (ADS)

Cui, Jing; Choi, Youngkyu; Chae, Soo-Ik

2015-12-01

In this paper we compare the coding efficiency of AVS 2.0[1] for engines of the Context-based Binary Arithmetic Coding (CBAC)[2] in the AVS 2.0 and the Context-Adaptive Binary Arithmetic Coder (CABAC)[3] in the HEVC[4]. For fair comparison, the CABAC is embedded in the reference code RD10.1 because the CBAC is in the HEVC in our previous work[5]. The rate estimation table is employed only for RDOQ in the RD code. To reduce the computation complexity of the video encoder, therefore we modified the RD code so that the rate estimation table is employed for all RDO decision. Furthermore, we also simplify the complexity of rate estimation table by reducing the bit depth of its fractional part to 2 from 8. The simulation result shows that the CABAC has the BD-rate loss of about 0.7% compared to the CBAC. It seems that the CBAC is a little more efficient than that the CABAC in the AVS 2.0.

Elementary students' engagement in failure-prone engineering design tasks

NASA Astrophysics Data System (ADS)

Andrews, Chelsea Joy

Although engineering education has been practiced at the undergraduate level for over a century, only fairly recently has the field broadened to include the elementary level; the pre-college division of the American Society of Engineering Education was established in 2003. As a result, while recent education standards require engineering in elementary schools, current studies are still filling in basic research on how best to design and implement elementary engineering activities. One area in need of investigation is how students engage with physical failure in design tasks. In this dissertation, I explore how upper elementary students engage in failure-prone engineering design tasks in an out-of-school environment. In a series of three empirical case studies, I look closely at how students evaluate failed tests and decide on changes to their design constructions, how their reasoning evolves as they repeatedly encounter physical failure, and how students and facilitators co-construct testing norms where repetitive failure is manageable. I also briefly investigate how students' engagement differs in a task that features near-immediate success. By closely examining student groups' discourse and their interactions with their design constructions, I found that these students: are able to engage in iteration and see failure-as-feedback with minimal externally-imposed structure; seem to be designing in a more sophisticated manner, attending to multiple causal factors, after experiencing repetitive failure; and are able to manage the stress and frustration of repetitive failure, provided the co-constructed testing norms of the workshop environment are supportive of failure management. These results have both pedagogical implications, in terms of how to create and facilitate design tasks, and methodological implications--namely, I highlight the particular insights afforded by a case study approach for analyzing engagement in design tasks.

Institutional Commitment to Fairness in College Teaching.

ERIC Educational Resources Information Center

Rodabaugh, Rita Cobb

1996-01-01

The role of college faculty in creating a climate of fairness is examined, distinguishing three kinds of fairness--interactional, procedural, and outcome. The roles of departments, administrators, and others in institutionalizing fairness and making explicit the institution's commitment to fairness are also considered. (MSE)

7 CFR 51.1555 - Fairly well matured.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well matured. 51.1555 Section 51.1555 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards....1555 Fairly well matured. Fairly well matured means that the skins of the potatoes are generally fairly...

7 CFR 51.1320 - Fairly well formed.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Fairly well formed. 51.1320 Section 51.1320... STANDARDS) United States Standards for Winter Pears 1 Definitions § 51.1320 Fairly well formed. Fairly well... general appearance of the pear shall be considered fairly well formed. ...

7 CFR 51.1555 - Fairly well matured.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well matured. 51.1555 Section 51.1555 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards....1555 Fairly well matured. Fairly well matured means that the skins of the potatoes are generally fairly...

7 CFR 51.1320 - Fairly well formed.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly well formed. 51.1320 Section 51.1320... STANDARDS) United States Standards for Winter Pears 1 Definitions § 51.1320 Fairly well formed. Fairly well... general appearance of the pear shall be considered fairly well formed. ...

7 CFR 51.1320 - Fairly well formed.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well formed. 51.1320 Section 51.1320... STANDARDS) United States Standards for Winter Pears 1 Definitions § 51.1320 Fairly well formed. Fairly well... general appearance of the pear shall be considered fairly well formed. ...

7 CFR 51.612 - Fairly good heart formation.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly good heart formation. 51.612 Section 51.612....612 Fairly good heart formation. Fairly good heart formation means that the stalk has a moderate number of fairly stocky inner heart branches for its size. ...

7 CFR 51.612 - Fairly good heart formation.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly good heart formation. 51.612 Section 51.612....612 Fairly good heart formation. Fairly good heart formation means that the stalk has a moderate number of fairly stocky inner heart branches for its size. ...

Exploration of risk factors contributing to the presence of influenza A virus in swine at agricultural fairs

PubMed Central

Bowman, Andrew S; Workman, Jeffrey D; Nolting, Jacqueline M; Nelson, Sarah W; Slemons, Richard D

2014-01-01

Influenza A virus infections occurring in exhibition swine populations at agricultural fairs during 2012 served as a source of H3N2 variant influenza A viruses transmitted to humans resulting in more than 300 documented cases. Prior to the outbreak, this investigation was initiated to identify fair-level risk factors contributing to influenza A virus infections in pigs at agricultural fairs. As part of an ongoing active surveillance program, nasal swabs and associated fair-level metadata were collected from pigs at 40 junior fair market swine shows held in Ohio during the 2012 fair season. Analyses of the data show that the adjusted odds of having influenza A virus-infected pigs at a fair were 1.27 (95% confidential interval (CI): 1.04–1.66) higher for every 20 pig increase in the size of the swine show. Additionally, four of the five fairs that hosted breeding swine shows in addition to their junior fair market swine shows had pigs test positive for influenza A virus. While the current study was limited to 40 fairs within one state, the findings provided insight for veterinary and public health officials developing mitigation strategies to decrease the intra- and inter-species transmission of influenza A virus at fairs. PMID:26038494

On the relation between trust and fairness in environmental risk management.

PubMed

Earle, Timothy C; Siegrist, Michael

2008-10-01

In this study, we empirically examine the relations between trust, fairness, and cooperation within two environmental risk management contexts, one in which the focal issue is of high personal moral importance and the other in which the focal issue is of low moral importance. Using an experimental design embedded in two parallel survey questionnaires, one mailed to residents of Washington State, the other to German-speaking residents of Switzerland, we either manipulated or constructed three factors, issue importance (high/low), procedural fairness (fair/unfair), and policy outcome (risk averse/risk accepting). This design enabled us to compare the predictions of the standard account of procedural fairness, that trust and cooperation are determined by judgments of fairness, with the predictions of an alternative account, that trust and cooperation will be determined by judgments of procedural fairness only when the issue involved is not morally important. Results for the American case showed that under conditions of high issue importance, policy outcome affected judged fairness, trust, and cooperation. Under conditions of low issue importance, policy outcome had no effect on judged fairness or trust but did have a moderate impact on cooperation. Analyses also showed that when issue importance was high, procedural fairness had no effects. When issue importance was low, procedural fairness had moderate effects on judged fairness and trust. Results for the Swiss case replicated the main findings for the American case. Together, these results support the alternative model of the relation between trust and fairness, suggesting that the efficacy of fair procedures is strictly limited.

24 CFR 125.501 - Fair Housing Organizations Initiative.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Initiative. 125.501 Section 125.501 Housing and Urban Development Regulations Relating to Housing and Urban... FAIR HOUSING FAIR HOUSING INITIATIVES PROGRAM § 125.501 Fair Housing Organizations Initiative. (a) The Fair Housing Organizations Initiative of the FHIP provides funding to develop or expand the ability of...

7 CFR 51.3066 - Fairly well colored.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well colored. 51.3066 Section 51.3066 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Fairly well colored. Fairly well colored means that the avocado shows a shade of color which is fairly...

7 CFR 51.3066 - Fairly well colored.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well colored. 51.3066 Section 51.3066 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Fairly well colored. Fairly well colored means that the avocado shows a shade of color which is fairly...

7 CFR 51.612 - Fairly good heart formation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly good heart formation. 51.612 Section 51.612... STANDARDS) United States Consumer Standards for Celery Stalks Definitions § 51.612 Fairly good heart formation. Fairly good heart formation means that the stalk has a moderate number of fairly stocky inner...

7 CFR 51.580 - Fairly well developed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well developed. 51.580 Section 51.580... (INSPECTION, CERTIFICATION, AND STANDARDS) United States Standards for Celery Definitions § 51.580 Fairly well developed. Fairly well developed means that the branches are of fairly good width and thickness in relation...

7 CFR 51.580 - Fairly well developed.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well developed. 51.580 Section 51.580... (INSPECTION, CERTIFICATION, AND STANDARDS) United States Standards for Celery Definitions § 51.580 Fairly well developed. Fairly well developed means that the branches are of fairly good width and thickness in relation...

7 CFR 51.3066 - Fairly well colored.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly well colored. 51.3066 Section 51.3066... STANDARDS) United States Standards for Florida Avocados Definitions § 51.3066 Fairly well colored. Fairly well colored means that the avocado shows a shade of color which is fairly characteristic of the...

7 CFR 51.1555 - Fairly well matured.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well matured. 51.1555 Section 51.1555... STANDARDS) United States Standards for Grades of Potatoes 1 Definitions § 51.1555 Fairly well matured. Fairly well matured means that the skins of the potatoes are generally fairly firmly set and not more...

7 CFR 51.3066 - Fairly well colored.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well colored. 51.3066 Section 51.3066... STANDARDS) United States Standards for Florida Avocados Definitions § 51.3066 Fairly well colored. Fairly well colored means that the avocado shows a shade of color which is fairly characteristic of the...

7 CFR 51.1555 - Fairly well matured.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Fairly well matured. 51.1555 Section 51.1555... STANDARDS) United States Standards for Grades of Potatoes 1 Definitions § 51.1555 Fairly well matured. Fairly well matured means that the skins of the potatoes are generally fairly firmly set and not more...

36 CFR 223.60 - Determining fair market value.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Determining fair market value... Determining fair market value. The objective of Forest Service timber appraisals is to determine fair market value. Fair market value is estimated by such methods as are authorized by the Chief, Forest Service...

75 FR 4100 - Affirmative Fair Housing, Marketing (AFHM) Plan-Multifamily Housing, Affirmative Fair Housing...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-26

..., Marketing (AFHM) Plan-Multifamily Housing, Affirmative Fair Housing Marketing (AFHM) Plan-Single Family Housing and Affirmative Fair Housing Marketing (AFHM) Plan- Cooperatives/Condominiums AGENCY: Office of... for marketing to ensure that they meet the Fair Housing guidelines concerning the manner in which...

7 CFR 51.612 - Fairly good heart formation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly good heart formation. 51.612 Section 51.612... STANDARDS) United States Consumer Standards for Celery Stalks Definitions § 51.612 Fairly good heart formation. Fairly good heart formation means that the stalk has a moderate number of fairly stocky inner...

7 CFR 51.612 - Fairly good heart formation.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Fairly good heart formation. 51.612 Section 51.612... STANDARDS) United States Consumer Standards for Celery Stalks Definitions § 51.612 Fairly good heart formation. Fairly good heart formation means that the stalk has a moderate number of fairly stocky inner...

78 FR 30384 - Federal Regulatory Enforcement Fairness Hearing; Region X Regulatory Fairness Board

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-22

... SMALL BUSINESS ADMINISTRATION Federal Regulatory Enforcement Fairness Hearing; Region X Regulatory... Regional (Region X) Small Business Regulatory Fairness Board. SUMMARY: The (SBA) Office of the National... Region X Regulatory Fairness Board must contact Jos[eacute] M[eacute]ndez by May 30, 2013 in writing, by...

7 CFR 51.494b - Fairly well netted.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Fairly well netted. 51.494b Section 51.494b... STANDARDS) United States Standards for Grades of Cantaloups 1 Definitions § 51.494b Fairly well netted. Fairly well netted means that to an extent characteristic of the variety the cantaloup is fairly well...

7 CFR 51.1320 - Fairly well formed.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well formed. 51.1320 Section 51.1320... Fairly well formed. Fairly well formed means that the pear may be slightly abnormal in shape but not to... not materially detract from the general appearance of the pear shall be considered fairly well formed. ...

7 CFR 51.1320 - Fairly well formed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well formed. 51.1320 Section 51.1320... Fairly well formed. Fairly well formed means that the pear may be slightly abnormal in shape but not to... not materially detract from the general appearance of the pear shall be considered fairly well formed. ...

7 CFR 51.494b - Fairly well netted.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well netted. 51.494b Section 51.494b... STANDARDS) United States Standards for Grades of Cantaloups 1 Definitions § 51.494b Fairly well netted. Fairly well netted means that to an extent characteristic of the variety the cantaloup is fairly well...

7 CFR 51.494b - Fairly well netted.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly well netted. 51.494b Section 51.494b... STANDARDS) United States Standards for Grades of Cantaloups 1 Definitions § 51.494b Fairly well netted. Fairly well netted means that to an extent characteristic of the variety the cantaloup is fairly well...

Secondhand smoke policies at state and county fairs.

PubMed

Mage, Caroline; Goldstein, Adam O; Colgan, Siobhan; Skinner, Bron; Kramer, Kathryn D; Steiner, Julea; Staples, Ann H

2010-01-01

We sought to assess the smoking policies at state and county fairs in North Carolina. We contacted North Carolina fair managers by telephone to solicit participation in a survey that assessed the extent to which fairs have written policies about smoking and secondhand smoke (SHS) exposure, managers' beliefs concerning the health risks associated with SHS exposure, and specific reasons that might prompt managers to adopt smoke-free policies. Attempts were made to contact 47 fair managers, and 37 (66.0%) participated in the study. We found that although almost two-thirds of fairs prohibited smoking indoors, the vast majority (83.9%) had no limits on outdoor smoking. Most fair managers (84.6%) acknowledged that SHS may cause lung cancer, and a majority (51.6%) reported a belief that their patrons would largely be supportive of a more restrictive policy. Fair managers' responses were primarily based on their own opinions, estimates, and attitudes. Because of the high number and density of fair patrons, unrestricted outdoor smoking likely exposes most patrons to SHS. Action to eliminate all exposure to SHS at state and county fairs is needed.

Process evaluation of health fairs promoting cancer screenings.

PubMed

Escoffery, Cam; Liang, Shuting; Rodgers, Kirsten; Haardoerfer, Regine; Hennessy, Grace; Gilbertson, Kendra; Heredia, Natalia I; Gatus, Leticia A; Fernandez, Maria E

2017-12-18

Low income and uninsured individuals often have lower adherence to cancer screening for breast, cervical and colorectal cancer. Health fairs are a common community outreach strategy used to provide cancer-related health education and services. This study was a process evaluation of seven health fairs focused on cancer screening across the U.S. We conducted key-informant interviews with the fair coordinator and conducted baseline and follow-up surveys with fair participants to describe characteristics of participants as well as their experiences. We collected baseline data with participants at the health fairs and telephone follow-up surveys 6 months following the fair. Attendance across the seven health fairs ranged from 41 to 212 participants. Most fairs provided group or individual education, print materials and cancer screening during the event. Overall, participants rated health fairs as very good and participants reported that the staff was knowledgeable and that they liked the materials distributed. After the fairs, about 60% of participants, who were reached at follow-up, had read the materials provided and had conversations with others about cancer screening, and 41% talked to their doctors about screening. Based on findings from evaluation including participant data and coordinator interviews, we describe 6 areas in planning for health fairs that may increase their effectiveness. These include: 1) use of a theoretical framework for health promotion to guide educational content and activities provided, 2) considering the community characteristics, 3) choosing a relevant setting, 4) promotion of the event, 5) considerations of the types of services to deliver, and 6) evaluation of the health fair. The events reported varied in reach and the participants represented diverse races and lower income populations overall. Most health fairs offered education, print materials and onsite cancer screening. Participants reported general satisfaction with these events and were motivated through their participation to read educational materials or discuss screening with providers. Public health professionals can benefit from this process evaluation and recommendations for designing and evaluating health fairs.

Skin Color, Cultural Capital, and Beauty Products: An Investigation of the Use of Skin Fairness Products in Mumbai, India

PubMed Central

Shroff, Hemal; Diedrichs, Phillippa C.; Craddock, Nadia

2018-01-01

The use of skin fairness products that frequently contain toxic ingredients is associated with significant adverse health side effects. Due to the high prevalence of use in Asian and African countries, skin fairness product use is recognized as a growing public health concern. The multi-million-dollar skin fairness product industry has also been criticized for perpetuating racism and social inequalities by reinforcing beliefs about the benefits of skin fairness for cultural capital. No quantitative studies have assessed people’s beliefs about fairness and reasons for using or not using these products in India, one of the largest global markets for skin fairness products. The current study explored skin fairness product use among 1,992 women and men aged 16–60 years in the city of Mumbai, India using a self-report questionnaire. A total of 37.6% of the sample reported currently using skin fairness products, with women being two times more likely to use these products. Among current users, 17% reported past experiences of adverse side effects, and “Media/TV/Adverts” were the most common prompts for using fairness products, followed by “Friends” and “Family.” Men were significantly more likely than women to endorse beliefs about fairness being more attractive and were more likely to perceive family and peers as viewing fairness as beneficial for cultural capital. There were no differences between women and men currently using products in their desire to look as fair as media celebrities. Among non-users, women were significantly more likely than men to report concerns about product efficacy and side effects as reasons for non-use, while men were significantly more likely to report socioeconomic reasons for non-use. Implications of these findings are discussed in light of growing public health concerns about the use of fairness products, and potential for advocacy and public health interventions to address the use of skin fairness products. PMID:29410952

Skin Color, Cultural Capital, and Beauty Products: An Investigation of the Use of Skin Fairness Products in Mumbai, India.

PubMed

Shroff, Hemal; Diedrichs, Phillippa C; Craddock, Nadia

2017-01-01

The use of skin fairness products that frequently contain toxic ingredients is associated with significant adverse health side effects. Due to the high prevalence of use in Asian and African countries, skin fairness product use is recognized as a growing public health concern. The multi-million-dollar skin fairness product industry has also been criticized for perpetuating racism and social inequalities by reinforcing beliefs about the benefits of skin fairness for cultural capital. No quantitative studies have assessed people's beliefs about fairness and reasons for using or not using these products in India, one of the largest global markets for skin fairness products. The current study explored skin fairness product use among 1,992 women and men aged 16-60 years in the city of Mumbai, India using a self-report questionnaire. A total of 37.6% of the sample reported currently using skin fairness products, with women being two times more likely to use these products. Among current users, 17% reported past experiences of adverse side effects, and "Media/TV/Adverts" were the most common prompts for using fairness products, followed by "Friends" and "Family." Men were significantly more likely than women to endorse beliefs about fairness being more attractive and were more likely to perceive family and peers as viewing fairness as beneficial for cultural capital. There were no differences between women and men currently using products in their desire to look as fair as media celebrities. Among non-users, women were significantly more likely than men to report concerns about product efficacy and side effects as reasons for non-use, while men were significantly more likely to report socioeconomic reasons for non-use. Implications of these findings are discussed in light of growing public health concerns about the use of fairness products, and potential for advocacy and public health interventions to address the use of skin fairness products.

The effect of organizational structure on perceptions of procedural fairness.

PubMed

Schminke, M; Ambrose, M L; Cropanzano, R S

2000-04-01

This study explored the relationship between 3 dimensions of organizational structure--centralization, formalization, and size--and perceptions of procedural and interactional fairness. Data from 11 organizations (N = 209) indicated that, as predicted, centralization was negatively related to perceptions of procedural fairness, and organizational size was negatively related to interactional fairness. However, contrary to predictions, formalization was not related to perceptions of procedural fairness. Results suggest that organizational structure and design should play a more prominent role in our thinking about organizational fairness.

[Nurturing fair play in competitive sports. Results from a study on competitively oriented youth soccer].

PubMed

Pilz, G A

2005-08-01

Apologists of sports praise them as an ideal way to prevent addiction and violence. Sports critics see it rather as a socialization authority on the morals of the fair foul. This contradiction was investigated based on an examination of fairness behaviour and fairness education in youth soccer as well as the question of the connection between sports and violence and the preventive possibilities of sports. Our results point to differences in understanding fairness according to age, sex and primarily performance/success orientation. Teenagers learn al ready at the latest in the C youth that it is important and right in the interest of success to break rules. Thus it applies that the more distinctive the success orientation, the more in formal and formal fair play degenerate into fictitious action morals of competitive sport and make way for morals of the "fair foul". The coaches play an important, even quite obviously the central role as socialization agents. In stead of learning fairness, the opposite is often conveyed to many young people in the organizations. However, our examinations also show that coach es can positively influence both fairness understanding and fairness behaviour of young footballers. Coach es are thus challenged as role models to exemplify fair play by their own actions.

Hub and pylon fairing integration for helicopter drag reduction

NASA Technical Reports Server (NTRS)

Martin, D. M.; Mort, R. W.; Squires, P. K.; Young, L. A.

1991-01-01

The results of testing hub and pylon fairings mounted on a one-fifth scale helicopter with the goal of reducing parasite drag are presented. Lift, drag, and pitching moment, as well as side force and yawing moment, were measured. The primary objective of the test was to validate the drag reduction capability of integrated hub and pylon configurations in the aerodynamic environment produced by a rotating hub in forward flight. In addition to the baseline helicopter without fairings, three hub fairings and three pylon fairings were tested in various combinations. The three hub fairings tested reflect two different conceptual design approaches to implementing an integrated fairing configuration on an actual aircraft. The design philosophy is discussed in detail and comparisons are made between the wind tunnel models and potential full-scale prototypes. The data show that model drag can be reduced by as much as 20.8 percent by combining a small hub fairing with circular arc upper and flat lower surfaces and a nontapered 34-percent thick pylon fairing. Aerodynamic effects caused by the fairings, which may have a significant impact on static longitudinal and directional stability, were observed. The results support previous research which showed that the greatest reduction in model drag is achieved if the hub and pylon fairings are integrated with minimum gap between the two.

26 CFR 1.42-18 - Qualified contracts.

Code of Federal Regulations, 2013 CFR

2013-04-01

...)) specified in the commitment for the building. (3) The fair market value of the non-low-income portion of the... fair market value of the non-low-income portion also includes the fair market value of the land... building. The fair market value of the non-low-income portion also includes the fair market value of items...

26 CFR 1.42-18 - Qualified contracts.

Code of Federal Regulations, 2014 CFR

2014-04-01

...)) specified in the commitment for the building. (3) The fair market value of the non-low-income portion of the... fair market value of the non-low-income portion also includes the fair market value of the land... building. The fair market value of the non-low-income portion also includes the fair market value of items...

Science Teachers' Views about the Science Fair at Primary Education Level

ERIC Educational Resources Information Center

Tortop, Hasan Said

2013-01-01

Science fair is an environment where students present their scientific research projects. Opinions of science teachers who participated as a mentor in science fair are important for determining of the science fair quality and its contribution of science education. The aim of study was to determine science teachers' views about the science fair at…

25 CFR 700.119 - Establishment of fair market value.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false Establishment of fair market value. 700.119 Section 700... value. (a) General. The Commission shall establish the amount of fair market value to be offered to the... recommendations as to the fair market value of the habitations and/or improvements; or (2) The fair market value...

Iowa State Fair.

ERIC Educational Resources Information Center

Ohrn, Deborah Gore, Ed.

1994-01-01

This issue of the "Goldfinch" focuses on the Iowa state fair. The magazine begins with a map of the fair as it looks today. The article explains that the first Iowa state fair was held in 1854. After traveling from town to town for several years, the fair settled in the capital city of Des Moines in 1878. Eight years later, in 1886, the…

Achievable Human Exploration of Mars: Highlights from The Fourth Community Workshop (AM IV)

NASA Technical Reports Server (NTRS)

Thronson, Harley; Cassady, Joseph

2017-01-01

About a half decade ago, several professionals working mainly in industry on scenarios for initial human exploration of Mars together recognized that, under generally similar assumptions, there was a fair degree of similarity among these scenarios. Moreover, opportunities should be sought for greater community input into NASA's own scenario-building for the future of human space flight. A series of focused community workshops were considered to be effective to assess these scenarios and involve more directly the science community, including planetary protection, with industry. Four workshops to date each involve about sixty professional scientists, engineers, technologists, and strategists from NASA, academia, aerospace corporations, the National Academies, consulting organizations, and potential international partners.

InSight Final Flight Installation of Heatshield

NASA Image and Video Library

2018-04-12

In the Astrotech facility at Vandenberg Air Force Base in California, technicians and engineers place the heatshield on NASA's Interior Exploration using Seismic Investigations, Geodesy and Heat Transport, or InSight, Mars lander prior to encapsulation in its payload fairing. InSight will be the first mission to look deep beneath the Martian surface. It will study the planet's interior by measuring its heat output and listen for marsquakes. The spacecraft will use the seismic waves generated by marsquakes to develop a map of the planet’s deep interior. The resulting insight into Mars’ formation will provide a better understanding of how other rocky planets, including Earth, were created. InSight is scheduled for liftoff May 5, 2018.

Energy decisions reframed as justice and ethical concerns

NASA Astrophysics Data System (ADS)

Sovacool, Benjamin K.; Heffron, Raphael J.; McCauley, Darren; Goldthau, Andreas

2016-05-01

All too often, energy policy and technology discussions are limited to the domains of engineering and economics. Many energy consumers, and even analysts and policymakers, confront and frame energy and climate risks in a moral vacuum, rarely incorporating broader social justice concerns. Here, to remedy this gap, we investigate how concepts from justice and ethics can inform energy decision-making by reframing five energy problems — nuclear waste, involuntary resettlement, energy pollution, energy poverty and climate change — as pressing justice concerns. We conclude by proposing an energy justice framework centred on availability, affordability, due process, transparency and accountability, sustainability, equity and responsibility, which highlights the futurity, fairness and equity dimensions of energy production and use.

Technology of civil usage of composites. [in commercial aircraft structures

NASA Technical Reports Server (NTRS)

Kemp, D. E.

1977-01-01

The paper deals with the use of advanced composites in structural components of commercial aircraft. The need for testing the response of a material system to service environment is discussed along with methods for evaluating design and manufacturing aspects of a built-up structure under environmental conditions and fail-safe (damage-tolerance) evaluation of structures. Crashworthiness aspects, the fire-hazard potential, and electrical damage of composite structures are considered. Practical operational experience with commercial aircraft is reviewed for boron/epoxy foreflaps, Kevlar/epoxy fillets and fairings, graphite/epoxy spoilers, graphite/polysulfone spoilers, graphite/epoxy floor posts, boron/aluminum aft pylon skin panels, graphite/epoxy engine nose cowl outer barrels, and graphite/epoxy upper aft rudder segments.

Connecting Physics Bachelors to Their Dream Jobs

NASA Astrophysics Data System (ADS)

Bhattacharya, Shouvik

2013-01-01

People who earn bachelor’s degrees in physics are highly employable. Employers value the skills that physics bachelor’s recipients acquire and develop over their four years of a college education, such as complex problem solving, advanced mathematics, teamwork and programming. The Career Pathways Project of the American Institute of Physics (AIP) aims to better prepare physics undergraduates for the science, technology, engineering, and math (STEM) workforce. This presentation will include a discussion of common features among departments visited by the AIP’s Career Pathways team, ideas for a career workshop for physics undergraduates, and advice on how to make the most out of a job fair and how to start effective online professional networking.

State of STEM (SoSTEM) Address

NASA Image and Video Library

2014-01-29

Joey Hudy, Anthem, AZ, 16-year-old self-described “Maker” answers a question from the audience at the annual White House State of Science, Technology, Engineering, and Math (SoSTEM) address, Wednesday, Jan. 29, 2014, in the South Court Auditorium in the Eisenhower Executive Office Building on the White House complex in Washington. Joey sat with the First Lady at the President’s 2014 State of the Union Address after his first shot to fame in 2012 when he attended the White House Science Fair where the President took a turn using his “extreme marshmallow cannon” to launch a marshmallow across the East Room of the White House. Photo Credit: (NASA/Bill Ingalls)

State of STEM (SoSTEM) Address

NASA Image and Video Library

2014-01-29

National Geographic Kids reporter Trevor Jehl, right, interviews Joey Hudy, Anthem, AZ, 16-year-old self-described “Maker” at the annual White House State of Science, Technology, Engineering, and Math (SoSTEM) address, Wednesday, Jan. 29, 2014, in the South Court Auditorium in the Eisenhower Executive Office Building on the White House complex in Washington. Joey sat with the First Lady at the President’s 2014 State of the Union Address after his first shot to fame in 2012 when he attended the White House Science Fair where the President took a turn using his “extreme marshmallow cannon” to launch a marshmallow across the East Room of the White House. Photo Credit: (NASA/Bill Ingalls)

KSC-98pc1073

NASA Image and Video Library

1998-09-15

KENNEDY SPACE CENTER, FLA. -- Workers watch as the fairing for Deep Space 1 is lifted on the Mobile Service Tower to its place on the Boeing Delta 7326 rocket that will launch on Oct. 15, 1998. The first flight in NASA's New Millennium Program, Deep Space 1 is designed to validate 12 new technologies for scientific space missions of the next century. Onboard experiments include an ion propulsion engine and software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. Deep Space 1 will complete most of its mission objectives within the first two months, but will also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999

KSC-98pc1074

NASA Image and Video Library

1998-09-15

KENNEDY SPACE CENTER, FLA. -- The fairing for Deep Space 1 nears the top of the Mobile Service Tower before being attached to the Boeing Delta 7326 rocket that will launch on Oct. 15, 1998. The first flight in NASA's New Millennium Program, Deep Space 1 is designed to validate 12 new technologies for scientific space missions of the next century. Onboard experiments include an ion propulsion engine and software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. Deep Space 1 will complete most of its mission objectives within the first two months, but will also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999

KSC-98pc1072

NASA Image and Video Library

1998-09-15

KENNEDY SPACE CENTER, FLA. -- The fairing for Deep Space 1 is raised upright before being lifted on the Mobile Service Tower to its place on the Boeing Delta 7326 rocket that will launch on Oct. 15, 1998. The first flight in NASA's New Millennium Program, Deep Space 1 is designed to validate 12 new technologies for scientific space missions of the next century. Onboard experiments include an ion propulsion engine and software that tracks celestial bodies so the spacecraft can make its own navigation decisions without the intervention of ground controllers. Deep Space 1 will complete most of its mission objectives within the first two months, but will also do a flyby of a near-Earth asteroid, 1992 KD, in July 1999

GOES-S Encapsulation

NASA Image and Video Library

2018-02-07

In a clean room at Astrotech Space Operations in Titusville, Florida, technicians and engineers monitor progress as NOAA's Geostationary Operational Environmental Satellite-S, or GOES-S, is encapsulated in its payload fairing. It soon will be moved to Space Launch Complex 41 at Cape Canaveral Air Force Station for mounting atop the Atlas V rocket that will boost the satellite to orbit. GOES-S is the second in a series of four advanced geostationary weather satellites that will significantly improve the detection and observation of environmental phenomena that directly affect public safety, protection of property and the nation's economic health and prosperity. GOES-S is slated to launch March 1, 2018 aboard a United Launch Alliance Atlas V rocket.

From science fair to project-based science: A study of the implementation of an innovation through an existing activity system

NASA Astrophysics Data System (ADS)

Walker, Lisa Jean

The implementation process is critical to the success of educational innovations. Project-based science is an innovation designed to support students' science learning. Science fair is a pervasive school practice in which students exhibit science projects. Little is known about how science fair may affect the implementation of reform efforts in science education. This study explores the relationship of science fair and project-based science in the classrooms of three science teachers. Two theories are used to understand science fair as an instructional practice. Cultural historical activity theory supports an analysis of the origins and development of science fair. The idea of communities of practice supports a focus on why and how educational practitioners participate in science fair and what meanings the activity holds for them. The study identifies five historically-based design themes that have shaped science fair: general science, project method, scientific method, extra-curricular activity, and laboratory science. The themes provide a new framework for describing teachers' classroom practices for science fair activities and support analysis of the ways their practices incorporate aspects of project-based science. Three case studies in Chicago present ethnographic descriptions of science fair practices within the context of school communities. One focuses on the scientific method as a linear process for doing science, another on knowledge generation through laboratory experiments, and the third on student ability to engage in open-ended inquiry. One teacher reinvents a project-based science curriculum to strengthen students' laboratory-based science fair projects, while another reinvents science fair to teach science as inquiry. In each case, science fair is part of the school's efforts to improve science instruction. The cases suggest that reform efforts help to perpetuate science fair practice. To support systemic improvements in science education, this study recommends that science fair be recognized as a classroom instructional activity---rather than an extra-curricular event---and part of the system of science education in this country. If science fair is to reflect new ideas in science education, direct intervention in the practice is necessary. This study---including both the history and examples of current practice---provides valuable insights for reconsidering science fair's design.

[Renal arterial spin labeling magnetic resonance imaging in normal adults: a study with a 3.0 T scanner].

PubMed

Zhang, Fan; Zhang, Xuelin; Yang, Li; Shen, Jie; Gao, Wei

2013-10-01

To analyze the renal relative blood flow value (rBFV) and image quality in normal adults using single-shot fast spin echo, flow sensitive invention recovery (SSFSE-FAIR) magnetic resonance (MR) sequence and echo planar imaging, and flow sensitive invention recovery (EPI-FAIR) MR sequence, and assess its value for clinical application in routine renal examination. Forty volunteers (25 male and 15 female adults, aged 30 to 62 years) with normal renal function were included in this prospective study. All the subjects underwent 3.0 Tesla MR scanning using 3 MR scan modes, namely breath-holding EPI-FAIR, breath-holding SSFSE-FAIR and free breathing SSFSE-FAIR. SSFSE-FAIR without breath-holding was capable of differentiating the renal cortex and medulla with the corresponding rBFVs of 111.48∓9.23 and 94.98∓3.38, respectively. Breath-holding SSFSE-FAIR and EPI-FAIR failed to distinguish the borders of the renal cortex and medulla. The EPI-FAIR rBFV of mixed cortex and medulla value was 178.50∓17.17 (95%CI: 167.59, 189.41). Breath-holding SSFSE-FAIR and EPI-FAIR can not distinguish the renal cortex and medulla due to a poor spatial resolution but can be used for rough evaluation of renal blood perfusion. Free breathing SSFSE-FAIR with an improved spatial resolution allows evaluation of the status of renal perfusion of the cortex and medulla.

A study on pricing decision of supply chain based on fairness concern

NASA Astrophysics Data System (ADS)

Yang, Hongxiong; Sun, Xiongle

2017-03-01

The fairness concern is introduced into a closed-loop supply chain, which includes a manufacturer and a retailer. This paper study the effect of fairness concern on wholesale price, retail price, recycling prices, manufacturer profits and retails profits under two situation: only the manufacturer is fairness concern and only the retailer is fairness concern. Studies show that: Retailer's fairness concern will reduce the price of the wholesale price, while the retail price and the recycling price unchanged, which led to the retailer to get more supply chain profits. Manufacturers' fairness concerns will raise the wholesale price, thereby increasing the manufacturer's supply chain profit, and the retailer's profit is compromised.

Feasibility study of solid oxide fuel cell engines integrated with sprinter gas turbines: Modeling, design and control

NASA Astrophysics Data System (ADS)

Jia, Zhenzhong; Sun, Jing; Dobbs, Herb; King, Joel

2015-02-01

Conventional recuperating solid oxide fuel cell (SOFC)/gas turbine (GT) system suffers from its poor dynamic capability and load following performance. To meet the fast, safe and efficient load following requirements for mobile applications, a sprinter SOFC/GT system concept is proposed in this paper. In the proposed system, an SOFC stack operating at fairly constant temperature provides the baseline power with high efficiency while the fast dynamic capability of the GT-generator is fully explored for fast dynamic load following. System design and control studies have been conducted by using an SOFC/GT system model consisting of experimentally-verified component models. In particular, through analysis of the steady-state simulation results, an SOFC operation strategy is proposed to maintain fairly constant SOFC power (less than 2% power variation) and temperature (less than 2 K temperature variation) over the entire load range. A system design procedure well-suited to the proposed system has also been developed to help determining component sizes and the reference steady-state operation line. In addition, control analysis has been studied for both steady-state and transient operations. Simulation results suggest that the proposed system holds the promise to achieve fast and safe transient operations by taking full advantage of the fast dynamics of the GT-generator.

Preliminary Base Pressures Obtained from the X-15 Airplane at Mach Numbers from 1.1 to 3.2

NASA Technical Reports Server (NTRS)

Saltzman, Edwin J.

1961-01-01

Base pressure measurements have been made on the fuselage, 10 deg.-wedge vertical fin, and side fairing of the X-15 airplane. Data are presented for Mach numbers between 1.1 and 3.2 for both powered and unpowered flight. Comparisons are made with data from small-scale-model tests, semiempirical estimates, and theory. The results of this preliminary study show that operation of the interim rocket engines (propellant flow rate approximately 70 lb/sec) reduces the base drag of the X-15 by 25 to 35 percent throughout the test Mach number range. Values of base drag coefficient for the side fairing and fuselage obtained from X-15 wind-tunnel models were adequate for predicting the overall full-scale performance of the test airplane. The leading-edge sweep of the upper movable vertical fin was not an important factor affecting the fin base pressure. The power-off base pressure coefficients of the upper movable vertical fin (a 10 deg. wedge with chord-to-thickness ratio of 5.5 and semispan-to-thickness ratio of 3.2) are in general agreement with the small-scale blunt-trailing-edge-wing data of several investigators and with two-dimensional theory.

Use of online health information resources by American Indians and Alaska Natives

PubMed Central

Geana, Mugur; Daley, Christine Makosky; Nazir, Niaman; Cully, Lance; Etheridge, Jesse; Bledowski, Caroline; Choi, Won S.; Greiner, K. Allen

2012-01-01

According to the Office of Minority Health, an estimated 4.9 million people living in the United States consider themselves American Indian or Alaska Native (AIAN), either alone or in combination with one or more races/ethnicities. AIAN are a racial/ethnic group experiencing serious health disparities, with very little if any improvement in health outcomes over the last several decades. This study was designed to explore use of the Internet as a health information source among American Indians in the Central Plains region of the United States. Nine hundred and ninety eight Natives in the region were recruited from May 2008 to December 2009 at pow wows, health fairs, through focus groups, career fairs and conferences, and other social and cultural events, and asked to complete a self-administered survey. Although compared with data from the general population, AIAN from our sample may seem heavier Internet users, their use of modern wireless devices is limited, and their usage of Internet to access health information is lower compared to the adult US population. Natives living in the Central Plains region face generational differences in both general and health-related use of the Internet. Inadequate availability of culturally appropriate health information websites may drive AIAN towards search engines and general information websites. PMID:22642739

Self-Presentation on the Web: Agencies Serving Abused and Assaulted Women

PubMed Central

Shi, Rui; Zhang, Jingwen; Xue, Jia

2014-01-01

Objectives. We examined the content and usability of the Web sites of agencies serving women victims of violence. Methods. We entered the names of a systematic 10% sample of 3774 agencies listed in 2 national directories into a search engine. We took (in April 2012) and analyzed screenshots of the 261 resulting home pages and the readability of 193 home and first-level pages. Results. Victims (94%) and donors (68%) were the primary intended audiences. About one half used social media and one third provided cues to action. Almost all (96.4%) of the Web pages were rated “fairly difficult” to “very confusing” to read, and 81.4% required more than a ninth-grade education to understand. Conclusions. The service and marketing functions were met fairly well by the agency home pages, but usability (particularly readability and offer of a mobile version) and efforts to increase user safety could be improved. Internet technologies are an essential platform for public health. They are particularly useful for reaching people with stigmatized health conditions because of the anonymity allowed. The one third of agencies that lack a Web site will not reach the substantial portion of the population that uses the Internet to find health information and other resources. PMID:24524489

Myth 18: It Is Fair to Teach All Children the Same Way

ERIC Educational Resources Information Center

Cooper, Carolyn R.

2009-01-01

Fairness is often considered synonymous with equality: the equal treatment of people sharing a uniform description or role. This concept--"fair" means "equal"--has spawned the notion that it is fair to teach all children the same way. Put simply, if fairness means equality in family life, restaurant dining, and sports--not to mention in observing…

What's fair is fair--or is it? Value differences underlying public views about social justice.

PubMed

Rasinski, K A

1987-07-01

Individual differences in judgments of the fairness of various sociopolitical phenomena were examined in three surveys. Scales measuring two value dimensions thought to underlie the meaning of fairness were constructed, and survey respondents endorsing these different values were compared on their evaluation of the procedural and distributive fairness of political objects. Those endorsing the value of proportionality, hypothesized by equity theorists to underlie fairness judgments, judged equity-based public policies to be fairer than equality-based policies and judged that Ronald Reagan would be a fairer president than Walter Mondale. These people also emphasized the procedural aspects of government when judging government fairness. Respondents endorsing the value of egalitarianism, hypothesized by developmental theorists and some political philosophers to underlie fairness judgments, judged equality-based public policies to be fairer than equity-based policies and judged that Mondale would be a fairer president than Reagan. These people emphasized the distributive aspects of government when judging government fairness. Results support the naive moral philosopher image of the individual as judge of political objects (Tyler, 1984a). Political fairness judgments are ideological responses and are subject to the influence of the value structure of the judge (Tetlock, 1986).

Electromagnetic Launch Vehicle Fairing and Acoustic Blanket Model of Received Power Using FEKO

NASA Technical Reports Server (NTRS)

Trout, Dawn H.; Stanley, James E.; Wahid, Parveen F.

2011-01-01

Evaluating the impact of radio frequency transmission in vehicle fairings is important to sensitive spacecraft. This paper employees the Multilevel Fast Multipole Method (MLFMM) feature of a commercial electromagnetic tool to model the fairing electromagnetic environment in the presence of an internal transmitter. This work is an extension of the perfect electric conductor model that was used to represent the bare aluminum internal fairing cavity. This fairing model includes typical acoustic blanketing commonly used in vehicle fairings. Representative material models within FEKO were successfully used to simulate the test case.

“I pick you”: the impact of fairness and race on infants’ selection of social partners

PubMed Central

Burns, Monica P.; Sommerville, Jessica A.

2014-01-01

By 15 months of age infants are sensitive to violations of fairness norms as assessed via their enhanced visual attention to unfair versus fair outcomes in violation-of-expectation paradigms. The current study investigated whether 15-month-old infants select social partners on the basis of prior fair versus unfair behavior, and whether infants integrate social selections on the basis of fairness with the race of the distributors and recipients involved in the exchange. Experiment 1 demonstrated that after witnessing one adult distribute toys to two recipients fairly (2:2 distribution), and another adult distribute toys to two recipients unfairly (1:3 distribution), Caucasian infants selected fair over unfair distributors when both distributors were Caucasian; however, this preference was not present when the fair actor was Asian and the unfair actor was Caucasian. In Experiment 2, when fairness, the race of the distributor, and the race of the recipients were fully crossed, Caucasian infants’ social selections varied as a function of the race of the recipient advantaged by the unfair distributor. Specifically, infants were more likely to select the fair distributor when the unfair recipient advantaged the Asian (versus the Caucasian) recipient. These findings provide evidence that infants select social partners on the basis of prior fair behavior and that infants also take into account the race of distributors and recipients when making their social selections. PMID:24575069

COSEE-AK Ocean Science Fairs: A Science Fair Model That Grounds Student Projects in Both Western Science and Traditional Native Knowledge

ERIC Educational Resources Information Center

Dublin, Robin; Sigman, Marilyn; Anderson, Andrea; Barnhardt, Ray; Topkok, Sean Asiqluq

2014-01-01

We have developed the traditional science fair format into an ocean science fair model that promoted the integration of Western science and Alaska Native traditional knowledge in student projects focused on the ocean, aquatic environments, and climate change. The typical science fair judging criteria for the validity and presentation of the…

Preschool Children's Perceptions of Fairness: "I Can Wait, Even if It Takes a While"

ERIC Educational Resources Information Center

Hod-Shemer, Orit; Zimerman, Hana; Hassunah-Arafat, Safieh; Wertheim, Cheruta

2018-01-01

Most studies on fairness behavior in preschool focus on fair resource allocation and on children's behavior when faced with fairness dilemmas. The purpose of this study is to understand preschoolers' point of view: what do they think when presented with various scenarios that call for fairness behavior? We interviewed 66 children aged 3.5-6 years,…

Detection of influenza A virus from agricultural fair environment: Air and surfaces.

PubMed

Lauterbach, Sarah E; Wright, Courtney M; Zentkovich, Michele M; Nelson, Sarah W; Lorbach, Joshua N; Bliss, Nola T; Nolting, Jacqueline M; Pierson, Raymond M; King, Maria D; Bowman, Andrew S

2018-05-01

Agricultural fairs facilitate an environment conducive to the spread of influenza A virus with large numbers of pigs from various different locales comingling for several days (5-8 days). Fairs are also associated with zoonotic transmission of influenza A virus as humans have unrestricted contact with potentially infected swine throughout the fair's duration. Since 2005, the Centers for Disease Control and Prevention has reported 468 cases of variant influenza A virus, with most cases having had exposure to swine at agricultural fairs. Many mechanisms have been proposed as potential direct and indirect routes of transmission that may be enhancing intra- and inter-species transmission of influenza A virus at fairs. This study examines airborne respiratory droplets and portable animal-care items as potential routes of transmission that may be contributing to enhanced viral spread throughout the swine barn and the resulting variant cases of influenza A. Air samples were taken from inside swine barns at 25 fairs between the years 2013 and 2014. Influenza A virus was detected molecularly in 11 of 59 (18.6%) air samples, representing 4 of the 25 fairs. Viable H1N1 virus, matching virus recovered from swine at the fair, was recovered from the air at one fair in 2013. During the summer of 2016, 75 of 400 (18.8%) surface samples tested positive for molecular presence of influenza A virus and represented 10 of 20 fairs. Seven viral isolates collected from four fairs were recovered from the surfaces. Whole genome sequences of the viruses recovered from the surfaces are >99% identical to the viruses recovered from individual pigs at each respective fair. The detection and recovery of influenza A virus from both the air and surfaces found within the swine barn at agricultural fairs provide evidence for potential viral transmission through these routes, which may contribute to both intra- and inter-species transmission, threatening public health. These findings reinforce the need for new and improved mitigation strategies at agricultural fairs in order to reduce the risk to animal and public health. Copyright © 2018 Elsevier B.V. All rights reserved.

7 CFR 51.772 - Fairly smooth texture.

Code of Federal Regulations, 2011 CFR

2011-01-01

... texture. Fairly smooth texture means that the skin is fairly thin and not coarse for the variety and size of the fruit. “Fairly thin” means that the skin thickness does not average more than 1/2 inch (12.7...

7 CFR 51.772 - Fairly smooth texture.

Code of Federal Regulations, 2012 CFR

2012-01-01

... texture. Fairly smooth texture means that the skin is fairly thin and not coarse for the variety and size of the fruit. “Fairly thin” means that the skin thickness does not average more than 1/2 inch (12.7...

7 CFR 51.772 - Fairly smooth texture.

Code of Federal Regulations, 2010 CFR

2010-01-01

... texture. Fairly smooth texture means that the skin is fairly thin and not coarse for the variety and size of the fruit. “Fairly thin” means that the skin thickness does not average more than 1/2 inch (12.7...

Infants Associate Praise and Admonishment with Fair and Unfair Individuals

PubMed Central

DesChamps, Trent D.; Eason, Arianne E.; Sommerville, Jessica A.

2016-01-01

Recent evidence suggests that infants possess a rudimentary sensitivity to fairness: infants expect resources to be distributed fairly and equally, and prefer individuals that distribute resources fairly over those that do so unfairly. The goal of the present work was to determine whether infants' evaluations of fair and unfair individuals also includes an understanding that fair individuals are worthy of praise and unfair individuals are worthy of admonishment. After watching individuals distribute goods fairly or unfairly to recipients, 15-month-old (Experiments 1 and 2) and 13-month-old (Experiment 3) infants took part in a test phase in which they saw only the distributors' faces accompanied by praise or admonishment. Across all experiments, infants differentially shifted their visual attention to images of the fair and unfair distributors as a function of the accompanying praise or admonishment, although the direction in which they did so varied by age. Thus, by the start of the second year of life, infants appear to perceive fair individuals as morally praiseworthy and unfair individuals as morally blameworthy. PMID:27570495

Durability of Environmental Barrier Coatings in a Water Vapor/Oxygen Environment

NASA Technical Reports Server (NTRS)

Holchin, John E.

2004-01-01

Silicon carbide (Sic) and silicon nitride (Si3N4) show potential for application in the hot sections of advanced jet engines. The oxidation behavior of these materials has been studied in great detail. In a pure oxygen environment, a silica (SiO2) layer forms on the surface and provides protection from further oxidation. Initial oxidation is rapid, but slows as silica layer grows; this is known as parabolic oxidation. When exposed to model fuel-lean combustion applications (standard in jet engines), wherein the partial pressure of water vapor is approximately 0.5 atm., these materials exhibit different characteristics. In such an environment, the primary oxidant to form silica is water vapor. At the same time, water vapor reacts with the surface oxide to form gaseous silicon hydroxide (Si(OH)4). The simultaneous formation of both silica and Si(OH)4 -the latter which is lost to the atmosphere- the material continues to recede. Recession rates for uncoated Sic and Si3N4 are unacceptably high, for use in jet engines, - on the order of 1mm/4000h. External coatings have been developed that protect Si-based materials from water vapor attack. One such coating consists of a Ba(0.75)Sr(0.25)Al2Si2O8 (BSAS) topcoat, a mullite/BSAS intermediate layer and a Si bond coat. The key function of the topcoat is to protect the Si-base material from water vapor; therefore it must be fairly stable in water vapor (recession rate of about 1mm/40,000h) and remain crack free. Although BSAS is much more resistant to water vapor attack than pure silica, it exhibits a linear weight loss in 50% H2O - 50% O2 at 1500 C. The objective of my research is to determine the oxidation behavior of a number of alternate hot-pressed monolithic top coat candidates. Potential coatings were exposed at 1500 C to a 50% H2O - 50% O2 gas mixture flowing at 4.4 cm/s . These included rare- earth silicates, barium-strontium aluminosilicates. When weight changes were measured with a continuously recording microbalance, linear weight loss was observed. BSAS materials have a fairly high volatility at this temperature, but rare-earth mono-silicate compounds were significantly more stable.

75 FR 26271 - Fair Housing Initiatives Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-11

... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5376-N-33] Fair Housing Initiatives... Department in selecting the highest ranked applicants to receive funds under the Fair Housing Initiatives... following initiatives; Private Enforcement, Education and Outreach, and Fair Housing Organizations. The...

26 CFR 1.897-9T - Treatment of certain interest in publicly traded corporations, definition of foreign person, and...

Code of Federal Regulations, 2010 CFR

2010-04-01

... fair market value greater than the fair market value on that date of 5 percent of the regularly traded class of the corporation's stock with the lowest fair market value. However, if a non-regularly traded... if on the date it was acquired by its present holder it had a fair market value greater than the fair...

Assessment of Quality and Content of Online Information About Hip Arthroscopy.

PubMed

Ellsworth, Bridget; Patel, Hiren; Kamath, Atul F

2016-10-01

The purpose of this study was to assess the quality of information available to patients on the Internet when using popular search engines to search the term "hip arthroscopy." We analyzed the quality and content of information about hip arthroscopy (HA) on the first 50 websites returned by the search engines Google and Bing for the search term "hip arthroscopy." The sites were categorized by type, and quality and content were measured using the DISCERN score, along with an HA-specific content score. The HA-specific content score was used to assess each website for the presence or absence of 19 topics about HA determined to be important for a patient seeking information about the procedure. The Health on the Net Code (HONcode) status of each website was also noted. The mean DISCERN score for all websites analyzed was 39.5, considered "poor," while only 44.6% of sites were considered "fair" or "good." Governmental and nonprofit organization (NPO) websites had the highest average DISCERN score. The mean HA-specific content score was 8.6 (range, 2 to 16). The commercial website category had the highest average HA-specific content score, followed by the governmental and NPO category. Sites that bore the HONcode certification obtained significantly higher DISCERN scores than those without the certification (P = .0032) but did not obtain significantly higher HA-specific content scores. "Hip arthroscopy" is a fairly general term, and there is significant variability in the quality of HA information available online. The HONcode is useful to identify quality patient information websites; however, it is not commonly used in HA-specific websites and does not encompass all quality websites about HA. This study increases awareness of the quality of information on HA available online. Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

7 CFR 51.2085 - Fairly uniform color.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly uniform color. 51.2085 Section 51.2085... Definitions § 51.2085 Fairly uniform color. Fairly uniform color means that the shells do not show excessive variation in color, whether bleached or natural. ...

7 CFR 51.2085 - Fairly uniform color.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly uniform color. 51.2085 Section 51.2085... Definitions § 51.2085 Fairly uniform color. Fairly uniform color means that the shells do not show excessive variation in color, whether bleached or natural. ...

7 CFR 51.580 - Fairly well developed.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly well developed. 51.580 Section 51.580 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... STANDARDS) United States Standards for Celery Definitions § 51.580 Fairly well developed. Fairly well...

7 CFR 51.580 - Fairly well developed.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Fairly well developed. 51.580 Section 51.580 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... STANDARDS) United States Standards for Celery Definitions § 51.580 Fairly well developed. Fairly well...

7 CFR 51.575 - Fairly well blanched.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Fairly well blanched. 51.575 Section 51.575 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... STANDARDS) United States Standards for Celery Definitions § 51.575 Fairly well blanched. Fairly well...

7 CFR 51.580 - Fairly well developed.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well developed. 51.580 Section 51.580 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... STANDARDS) United States Standards for Celery Definitions § 51.580 Fairly well developed. Fairly well...

7 CFR 51.3205 - Fairly well shaped.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well shaped. 51.3205 Section 51.3205 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Fairly well shaped. Fairly well shaped means that the onion shows the characteristic shape, not...

7 CFR 51.575 - Fairly well blanched.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well blanched. 51.575 Section 51.575 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... STANDARDS) United States Standards for Celery Definitions § 51.575 Fairly well blanched. Fairly well...

7 CFR 51.575 - Fairly well blanched.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly well blanched. 51.575 Section 51.575 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... STANDARDS) United States Standards for Celery Definitions § 51.575 Fairly well blanched. Fairly well...

41 CFR 102-33.395 - What is FAIRS?

Code of Federal Regulations, 2011 CFR

2011-01-01

... Regulations System (Continued) FEDERAL MANAGEMENT REGULATION PERSONAL PROPERTY 33-MANAGEMENT OF GOVERNMENT AIRCRAFT Reporting Information on Government Aircraft Federal Aviation Interactive Reporting System (fairs) § 102-33.395 What is FAIRS? FAIRS is a management information system operated by GSA (MTA) to collect...

41 CFR 102-33.395 - What is FAIRS?

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations System (Continued) FEDERAL MANAGEMENT REGULATION PERSONAL PROPERTY 33-MANAGEMENT OF GOVERNMENT AIRCRAFT Reporting Information on Government Aircraft Federal Aviation Interactive Reporting System (fairs) § 102-33.395 What is FAIRS? FAIRS is a management information system operated by GSA (MTA) to collect...

41 CFR 102-33.395 - What is FAIRS?

Code of Federal Regulations, 2012 CFR

2012-01-01

... Regulations System (Continued) FEDERAL MANAGEMENT REGULATION PERSONAL PROPERTY 33-MANAGEMENT OF GOVERNMENT AIRCRAFT Reporting Information on Government Aircraft Federal Aviation Interactive Reporting System (fairs) § 102-33.395 What is FAIRS? FAIRS is a management information system operated by GSA (MTA) to collect...

Platelet-Rich Plasma in Bone Regeneration: Engineering the Delivery for Improved Clinical Efficacy

PubMed Central

Rodriguez, Isaac A.; Growney Kalaf, Emily A.; Bowlin, Gary L.; Sell, Scott A.

2014-01-01

Human bone is a tissue with a fairly remarkable inherent capacity for regeneration; however, this regenerative capacity has its limitations, and defects larger than a critical size lack the ability to spontaneously heal. As such, the development and clinical translation of effective bone regeneration modalities are paramount. One regenerative medicine approach that is beginning to gain momentum in the clinical setting is the use of platelet-rich plasma (PRP). PRP therapy is essentially a method for concentrating platelets and their intrinsic growth factors to stimulate and accelerate a healing response. While PRP has shown some efficacy in both in vitro and in vivo scenarios, to date its use and delivery have not been optimized for bone regeneration. Issues remain with the effective delivery of the platelet-derived growth factors to a localized site of injury, the activation and temporal release of the growth factors, and the rate of growth factor clearance. This review will briefly describe the physiological principles behind PRP use and then discuss how engineering its method of delivery may ultimately impact its ability to successfully translate to widespread clinical use. PMID:25050347

Computational algorithm to evaluate product disassembly cost index

NASA Astrophysics Data System (ADS)

Zeid, Ibrahim; Gupta, Surendra M.

2002-02-01

Environmentally conscious manufacturing is an important paradigm in today's engineering practice. Disassembly is a crucial factor in implementing this paradigm. Disassembly allows the reuse and recycling of parts and products that reach their death after their life cycle ends. There are many questions that must be answered before a disassembly decision can be reached. The most important question is economical. The cost of disassembly versus the cost of scrapping a product is always considered. This paper develops a computational tool that allows decision-makers to calculate the disassembly cost of a product. The tool makes it simple to perform 'what if' scenarios fairly quickly. The tool is Web based and has two main parts. The front-end part is a Web page and runs on the client side in a Web browser, while the back-end part is a disassembly engine (servlet) that has disassembly knowledge and costing algorithms and runs on the server side. The tool is based on the client/server model that is pervasively utilized throughout the World Wide Web. An example is used to demonstrate the implementation and capabilities of the tool.

Stability of collapse lyophilized influenza vaccine formulations.

PubMed

Anamur, Cihad; Winter, Gerhard; Engert, Julia

2015-04-10

A clear limitation of many liquid vaccines is the obligatory cold-chain distribution system. Therefore, distribution of a dried vaccine formulation may be beneficial in terms of vaccine stability, handling and transport. Collapse freeze-drying is a process which utilizes fairly aggressive but at the same time economic lyophilization cycles where the formulation is dried above its glass transition temperature. In this study, we used collapse freeze-drying for a thermosensitive model influenza vaccine (Pandemrix(®)). The dried lyophilizates were further cryo-milled to engineer powder particles in the size range of approximately 20-80 μm which is applicable for epidermal powder immunization. Vaccine potency and stability were neither affected by high temperature input during collapse lyophilization nor over a storage period of six months. Furthermore, cryo-milled vaccine lyophilizates showed good storage stability of up to three months at high storage temperature (40 °C). This technique can provide a powerful tool for the worldwide distribution of vaccine and for new application technologies such as engineered powder immunization. Copyright © 2015 Elsevier B.V. All rights reserved.

Development of the IES method for evaluating the color rendition of light sources

DOE PAGES

David, Aurelien; Fini, Paul T.; Houser, Kevin W.; ...

2015-06-08

We have developed a two-measure system for evaluating light sources’ color rendition that builds upon conceptual progress of numerous researchers over the last two decades. The system quantifies the color fidelity and color gamut (change in object chroma) of a light source in comparison to a reference illuminant. The calculations are based on a newly developed set of reflectance data from real samples uniformly distributed in color space (thereby fairly representing all colors) and in wavelength space (thereby precluding artificial optimization of the color rendition scores by spectral engineering). The color fidelity score R f is an improved version ofmore » the CIE color rendering index. The color gamut score R g is an improved version of the Gamut Area Index. In combination, they provide two complementary assessments to guide the optimization of future light sources. This method summarizes the findings of the Color Metric Task Group of the Illuminating Engineering Society of North America (IES). It is adopted in the upcoming IES TM-30-2015, and is proposed for consideration with the International Commission on Illumination (CIE).« less

7 CFR 51.3205 - Fairly well shaped.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well shaped. 51.3205 Section 51.3205 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Onions Definitions § 51.3205 Fairly well shaped. Fairly well shaped means that the onion shows the...

7 CFR 51.2844 - Fairly well shaped.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly well shaped. 51.2844 Section 51.2844 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards...) Definitions § 51.2844 Fairly well shaped. Fairly well shaped means having the shape characteristic of the...

7 CFR 51.2844 - Fairly well shaped.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well shaped. 51.2844 Section 51.2844 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards...) Definitions § 51.2844 Fairly well shaped. Fairly well shaped means having the shape characteristic of the...

7 CFR 51.1557 - Fairly well shaped.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well shaped. 51.1557 Section 51.1557 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards....1557 Fairly well shaped. Fairly well shaped means that the potato is not materially pointed, dumbbell...

7 CFR 51.1007 - Fairly well formed.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well formed. 51.1007 Section 51.1007 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards....1007 Fairly well formed. Fairly well formed means that the fruit shows normal characteristic shape for...

7 CFR 51.3205 - Fairly well shaped.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well shaped. 51.3205 Section 51.3205 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Onions Definitions § 51.3205 Fairly well shaped. Fairly well shaped means that the onion shows the...

7 CFR 51.2844 - Fairly well shaped.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well shaped. 51.2844 Section 51.2844 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards...-Granex-Grano and Creole Types) Definitions § 51.2844 Fairly well shaped. Fairly well shaped means having...

7 CFR 51.611 - Fairly well developed.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well developed. 51.611 Section 51.611 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards....611 Fairly well developed. Fairly well developed means that the outer branches are not spindly or...

7 CFR 51.2844 - Fairly well shaped.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well shaped. 51.2844 Section 51.2844 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards...-Granex-Grano and Creole Types) Definitions § 51.2844 Fairly well shaped. Fairly well shaped means having...

7 CFR 51.1580 - Fairly well shaped.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well shaped. 51.1580 Section 51.1580 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Fairly well shaped. Fairly well shaped means that the appearance of the individual potato or the general...

7 CFR 51.1869 - Fairly well formed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well formed. 51.1869 Section 51.1869 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Fairly well formed. Fairly well formed means that the tomato is not more than moderately kidney-shaped...

7 CFR 51.1580 - Fairly well shaped.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well shaped. 51.1580 Section 51.1580 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Fairly well shaped. Fairly well shaped means that the appearance of the individual potato or the general...

7 CFR 51.611 - Fairly well developed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well developed. 51.611 Section 51.611 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards....611 Fairly well developed. Fairly well developed means that the outer branches are not spindly or...

7 CFR 51.1007 - Fairly well formed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well formed. 51.1007 Section 51.1007 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards....1007 Fairly well formed. Fairly well formed means that the fruit shows normal characteristic shape for...

7 CFR 51.1869 - Fairly well formed.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well formed. 51.1869 Section 51.1869 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Fairly well formed. Fairly well formed means that the tomato is not more than moderately kidney-shaped...

7 CFR 51.1557 - Fairly well shaped.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well shaped. 51.1557 Section 51.1557 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards....1557 Fairly well shaped. Fairly well shaped means that the potato is not materially pointed, dumbbell...

23 CFR 710.707 - Fair market value.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Fair market value. 710.707 Section 710.707 Highways... REAL ESTATE Concession Agreements § 710.707 Fair market value. A highway agency shall receive fair market value for any concession agreement involving a federally funded highway. ...

Fairness opinions in health care transactions--cause and effect: the emergence of private equity funds as a driving force in big and small transactions and the resulting increased use of fairness opinions.

PubMed

Becker, Scott; Lundeen, Ron

2007-01-01

The use of fairness opinions has become increasingly common with respect to the sale or merger of any company or division in a private equity funded or sponsored deal. The fairness opinion is often used to demonstrate that the value at which the transaction took place was a fair value to the selling company and thus did not improperly or unfairly leave the common holders with little consideration. This article covers rules and guidelines that should be adhered to in the issuance and review of fairness opinions.

Helicopter hub fairing and pylon interference drag

NASA Technical Reports Server (NTRS)

Graham, D. R.; Sung, D. Y.; Young, L. A.; Louie, A. W.; Stroub, R. H.

1989-01-01

A wind tunnel test was conducted to study the aerodynamics of helicopter hub and pylon fairings. The test was conducted in the 7-by 10 Foot Subsonic Wind Tunnel (Number 2) at Ames Research Center using a 1/5-scale XH-59A fuselage model. The primary focus of the test was on the rotor hub fairing and pylon mutual interference drag. Parametric studies of pylon and hub fairing geometry were also conducted. This report presents the major findings of the test as well as tabulated force and moment data, flow visualization photographs, and graphical presentations of the drag data. The test results indicate that substantial drag reduction can be attained through the use of a cambered hub fairing with circular arc upper surface and flat lower surface. Furthermore, a considerable portion of the overall drag reduction is attributed to the reduction in the hub-on-pylon interference drag. It is also observed that the lower surface curvature of the fairing has a strong influence on the hub fairing and on pylon interference drag. However, the drag reduction benefit that was obtained by using the cambered hub fairing with a flat lower surface was adversely affected by the clearance between the hub fairing and the pylon.

78 FR 14321 - Notice of Proposed Information Collection; Comment Request: Fair Housing Training Survey

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-05

... Information Collection; Comment Request: Fair Housing Training Survey AGENCY: Office of Fair Housing and Equal... of Fair Housing and Equal Opportunity (FHEO) began an outreach initiative to strengthen FHEO's ties... will be able to recognize and report discrimination in [[Page 14322

75 FR 18245 - Public Federal Regulatory Enforcement Fairness Hearing Region IX Regulatory Fairness Board

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-09

... the meeting is for Business Organizations, Trade Associations, Chambers of Commerce and related... SMALL BUSINESS ADMINISTRATION Public Federal Regulatory Enforcement Fairness Hearing Region IX... hereby given that the U.S. Small Business Administration (SBA) Region IX Regulatory Fairness Board and...

7 CFR 51.703 - Fairly well colored.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well colored. 51.703 Section 51.703 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing..., California, and Arizona) Definitions § 51.703 Fairly well colored. Fairly well colored means that except for...

7 CFR 51.1832 - Fairly well formed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well formed. 51.1832 Section 51.1832 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Definitions § 51.1832 Fairly well formed. Fairly well formed means that the fruit may not have the shape...

7 CFR 51.1832 - Fairly well formed.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well formed. 51.1832 Section 51.1832 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Definitions § 51.1832 Fairly well formed. Fairly well formed means that the fruit may not have the shape...

7 CFR 51.3065 - Fairly well formed.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well formed. 51.3065 Section 51.3065 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Fairly well formed. Fairly well formed means that the avocado may be slightly abnormal in shape but not...

7 CFR 51.1909 - Fairly well formed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well formed. 51.1909 Section 51.1909 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... § 51.1909 Fairly well formed. Fairly well formed means that the tomato is not decidedly kidney-shaped...

7 CFR 51.640 - Fairly well formed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well formed. 51.640 Section 51.640 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Florida, California, and Arizona) Definitions § 51.640 Fairly well formed. Fairly well formed means that...

7 CFR 51.902 - Fairly well filled.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well filled. 51.902 Section 51.902 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Definitions § 51.902 Fairly well filled. Fairly well filled means that the berries are reasonably closely...

7 CFR 51.1410 - Fairly well developed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well developed. 51.1410 Section 51.1410 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Definitions § 51.1410 Fairly well developed. Fairly well developed means that the kernel has at least a...

7 CFR 51.703 - Fairly well colored.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well colored. 51.703 Section 51.703 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing..., California, and Arizona) Definitions § 51.703 Fairly well colored. Fairly well colored means that except for...

7 CFR 51.1534 - Fairly well colored.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well colored. 51.1534 Section 51.1534 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Definitions § 51.1534 Fairly well colored. “Fairly well colored,” as applied to Italian type prunes, means...

7 CFR 51.1277 - Fairly well formed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well formed. 51.1277 Section 51.1277 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... § 51.1277 Fairly well formed. Fairly well formed means that the pear may be slightly abnormal in shape...

7 CFR 51.1277 - Fairly well formed.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well formed. 51.1277 Section 51.1277 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... § 51.1277 Fairly well formed. Fairly well formed means that the pear may be slightly abnormal in shape...

7 CFR 51.1445 - Fairly well developed.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well developed. 51.1445 Section 51.1445 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... § 51.1445 Fairly well developed. Fairly well developed means that the kernel has at least a moderate...

7 CFR 51.1830 - Fairly well colored.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well colored. 51.1830 Section 51.1830 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Definitions § 51.1830 Fairly well colored. Fairly well colored means that the surface of the fruit may have...

7 CFR 51.1445 - Fairly well developed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well developed. 51.1445 Section 51.1445 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... § 51.1445 Fairly well developed. Fairly well developed means that the kernel has at least a moderate...

7 CFR 51.639 - Fairly well colored.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well colored. 51.639 Section 51.639 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Florida, California, and Arizona) Definitions § 51.639 Fairly well colored. Fairly well colored means that...

7 CFR 51.640 - Fairly well formed.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well formed. 51.640 Section 51.640 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Florida, California, and Arizona) Definitions § 51.640 Fairly well formed. Fairly well formed means that...

7 CFR 51.639 - Fairly well colored.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well colored. 51.639 Section 51.639 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Florida, California, and Arizona) Definitions § 51.639 Fairly well colored. Fairly well colored means that...

7 CFR 51.3065 - Fairly well formed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well formed. 51.3065 Section 51.3065 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Fairly well formed. Fairly well formed means that the avocado may be slightly abnormal in shape but not...

7 CFR 51.1534 - Fairly well colored.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well colored. 51.1534 Section 51.1534 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Definitions § 51.1534 Fairly well colored. “Fairly well colored,” as applied to Italian type prunes, means...

7 CFR 51.1410 - Fairly well developed.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well developed. 51.1410 Section 51.1410 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Definitions § 51.1410 Fairly well developed. Fairly well developed means that the kernel has at least a...

7 CFR 51.1909 - Fairly well formed.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well formed. 51.1909 Section 51.1909 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... § 51.1909 Fairly well formed. Fairly well formed means that the tomato is not decidedly kidney-shaped...

7 CFR 51.902 - Fairly well filled.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well filled. 51.902 Section 51.902 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Definitions § 51.902 Fairly well filled. Fairly well filled means that the berries are reasonably closely...

7 CFR 51.1830 - Fairly well colored.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well colored. 51.1830 Section 51.1830 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Definitions § 51.1830 Fairly well colored. Fairly well colored means that the surface of the fruit may have...

Motivated cognition and fairness: Insights, integration, and creating a path forward.

PubMed

Barclay, Laurie J; Bashshur, Michael R; Fortin, Marion

2017-06-01

How do individuals form fairness perceptions? This question has been central to the fairness literature since its inception, sparking a plethora of theories and a burgeoning volume of research. To date, the answer to this question has been predicated on the assumption that fairness perceptions are subjective (i.e., "in the eye of the beholder"). This assumption is shared with motivated cognition approaches, which highlight the subjective nature of perceptions and the importance of viewing individuals arriving at those perceptions as active and motivated processors of information. Further, the motivated cognition literature has other key insights that have been less explicitly paralleled in the fairness literature, including how different goals (e.g., accuracy, directional) can influence how individuals process information and arrive at their perceptions. In this integrative conceptual review, we demonstrate how interpreting extant theory and research related to the formation of fairness perceptions through the lens of motivated cognition can deepen our understanding of fairness, including how individuals' goals and motivations can influence their subjective perceptions of fairness. We show how this approach can provide integration as well as generate new insights into fairness processes. We conclude by highlighting the implications that applying a motivated cognition perspective can have for the fairness literature and by providing a research agenda to guide the literature moving forward. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Regulating Emotion in the Context of Interpersonal Decisions: The Role of Anticipated Pride and Regret

PubMed Central

van der Schalk, Job; Bruder, Martin; Manstead, Antony

2012-01-01

Recent theories about the relation between emotion and behavior hold that social behavior is influenced not only by the experience of emotion, but also by the anticipation of emotion. We argue that anticipating future emotional states is an emotion regulation strategy when it leads to a change in behavior. In the current studies we examined how construal of a fair or an unfair situation in terms of positive or negative anticipated emotions influences the fairness of subsequent behavior. We used the Ultimatum Bargaining Game – an experimental game in which participants divide a resource between themselves and another person – as a social situation that offers the opportunity to engage in fair and unfair behavior. In Study 1 we used an autobiographical recall task to manipulate anticipated emotions. Although the task did not influence anticipated emotions directly, results showed that anticipated pride about fair behavior increased levels of fairness, whereas anticipated pride about unfair behavior decreased levels of fairness. Similarly, anticipated regret about fair behavior decreased levels of fairness, whereas anticipated regret about unfair behavior increased levels of fairness. In Study 2 we replicated this pattern of findings, and found that participants who thought about their anticipated emotions (pride or regret) in relation to unfair behavior behaved more fairly. We discuss these findings in relation to theories of emotion regulation and economic decision-making. PMID:23293615

The ontogeny of fairness in seven societies.

PubMed

Blake, P R; McAuliffe, K; Corbit, J; Callaghan, T C; Barry, O; Bowie, A; Kleutsch, L; Kramer, K L; Ross, E; Vongsachang, H; Wrangham, R; Warneken, F

2015-12-10

A sense of fairness plays a critical role in supporting human cooperation. Adult norms of fair resource sharing vary widely across societies, suggesting that culture shapes the acquisition of fairness behaviour during childhood. Here we examine how fairness behaviour develops in children from seven diverse societies, testing children from 4 to 15 years of age (n = 866 pairs) in a standardized resource decision task. We measured two key aspects of fairness decisions: disadvantageous inequity aversion (peer receives more than self) and advantageous inequity aversion (self receives more than a peer). We show that disadvantageous inequity aversion emerged across all populations by middle childhood. By contrast, advantageous inequity aversion was more variable, emerging in three populations and only later in development. We discuss these findings in relation to questions about the universality and cultural specificity of human fairness.

Procedural Fairness and Creativity: Does Voice Maintain People's Creative Vein over Time?

ERIC Educational Resources Information Center

Streicher, Bernhard; Jonas, Eva; Maier, Günter W.; Frey, Dieter; Spießberger, Anneliese

2012-01-01

Although some research suggests a link between procedural fairness and creativity, so far no study has directly tested whether a real manipulation of procedural fairness affects creativity. Additionally, research on procedural fairness effects consists mostly of unique studies, but more realistic, life-like longitudinal experiments with repeated…

41 CFR 102-33.395 - What is FAIRS?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) § 102-33.395 What is FAIRS? FAIRS is a management information system operated by GSA (MTA) to collect... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What is FAIRS? 102-33.395 Section 102-33.395 Public Contracts and Property Management Federal Property Management...

23 CFR 710.707 - Fair market value.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Fair market value. 710.707 Section 710.707 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RIGHT-OF-WAY AND ENVIRONMENT RIGHT-OF-WAY AND REAL ESTATE Concession Agreements § 710.707 Fair market value. A highway agency shall receive fair...

A Bargaining Experiment To Motivate a Discussion on Fairness.

ERIC Educational Resources Information Center

Dickinson, David L.

2002-01-01

Employs a classroom version of the research game, the Ultimatum Game, to teach undergraduate students how fairness affects behavior. Focuses on three concepts related to fairness. Finds that classroom results motivate discussion about a downward sloping demand curve for fairness. Provides an appendix that includes instructional materials. (JEH)

19 CFR 147.1 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Definitions. 147.1 Section 147.1 Customs Duties U... (CONTINUED) TRADE FAIRS General Provisions § 147.1 Definitions. The following are general definitions for the... Secretary of Commerce pursuant to the Trade Fair Act. (c) Fair operator. “Fair operator” means the party...

17 CFR 201.1100 - Creation of Fair Fund.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 17 Commodity and Securities Exchanges 2 2013-04-01 2013-04-01 false Creation of Fair Fund. 201.1100 Section 201.1100 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION RULES OF PRACTICE Fair Fund and Disgorgement Plans § 201.1100 Creation of Fair Fund. In any agency process initiated...

17 CFR 201.1100 - Creation of Fair Fund.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 17 Commodity and Securities Exchanges 3 2014-04-01 2014-04-01 false Creation of Fair Fund. 201.1100 Section 201.1100 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION RULES OF PRACTICE Fair Fund and Disgorgement Plans § 201.1100 Creation of Fair Fund. In any agency process initiated...

17 CFR 201.1100 - Creation of Fair Fund.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 2 2011-04-01 2011-04-01 false Creation of Fair Fund. 201.1100 Section 201.1100 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION RULES OF PRACTICE Fair Fund and Disgorgement Plans § 201.1100 Creation of Fair Fund. In any agency process initiated...

17 CFR 201.1100 - Creation of Fair Fund.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Creation of Fair Fund. 201.1100 Section 201.1100 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION RULES OF PRACTICE Fair Fund and Disgorgement Plans § 201.1100 Creation of Fair Fund. In any agency process initiated...

17 CFR 201.1100 - Creation of Fair Fund.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 17 Commodity and Securities Exchanges 2 2012-04-01 2012-04-01 false Creation of Fair Fund. 201.1100 Section 201.1100 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION RULES OF PRACTICE Fair Fund and Disgorgement Plans § 201.1100 Creation of Fair Fund. In any agency process initiated...

Test Fairness and Toulmin's Argument Structure

ERIC Educational Resources Information Center

Kunnan, Antony John

2010-01-01

This paper presents the author's response to Xiaoming Xi's article titled "How do we go about investigating test fairness?" In this response, the author focuses on test fairness and Toulmin's model of argument structure, Xi's proposal, and the challenges the proposal brings. Xi proposes an approach to investigating test fairness to guide…

7 CFR 51.1869 - Fairly well formed.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well formed. 51.1869 Section 51.1869... STANDARDS) United States Standards for Fresh Tomatoes 1 Definitions § 51.1869 Fairly well formed. Fairly well formed means that the tomato is not more than moderately kidney-shaped, lop-sided, elongated...

7 CFR 51.581 - Fairly well formed.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well formed. 51.581 Section 51.581 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Celery Definitions § 51.581 Fairly well formed. Fairly well formed means that the branches are...

7 CFR 51.2652 - Fairly well colored.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well colored. 51.2652 Section 51.2652 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... § 51.2652 Fairly well colored. Fairly well colored means that at least 95 percent of the surface of the...

7 CFR 51.1007 - Fairly well formed.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well formed. 51.1007 Section 51.1007... STANDARDS) United States Standards for Persian (Tahiti) Limes Definitions § 51.1007 Fairly well formed. Fairly well formed means that the fruit shows normal characteristic shape for the Persian variety and is...

7 CFR 51.3065 - Fairly well formed.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly well formed. 51.3065 Section 51.3065... STANDARDS) United States Standards for Florida Avocados Definitions § 51.3065 Fairly well formed. Fairly well formed means that the avocado may be slightly abnormal in shape but not to the extent that the...

7 CFR 51.585 - Fairly well trimmed.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Fairly well trimmed. 51.585 Section 51.585 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Celery Definitions § 51.585 Fairly well trimmed. Fairly well trimmed means that the main root...

7 CFR 51.3065 - Fairly well formed.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well formed. 51.3065 Section 51.3065... STANDARDS) United States Standards for Florida Avocados Definitions § 51.3065 Fairly well formed. Fairly well formed means that the avocado may be slightly abnormal in shape but not to the extent that the...

7 CFR 51.575 - Fairly well blanched.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well blanched. 51.575 Section 51.575... (INSPECTION, CERTIFICATION, AND STANDARDS) United States Standards for Celery Definitions § 51.575 Fairly well blanched. Fairly well blanched means that the midrib portions of the outer branches on the stalk are...

7 CFR 51.611 - Fairly well developed.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Fairly well developed. 51.611 Section 51.611... STANDARDS) United States Consumer Standards for Celery Stalks Definitions § 51.611 Fairly well developed. Fairly well developed means that the outer branches are not spindly or abnormally short and thin. ...

7 CFR 51.640 - Fairly well formed.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well formed. 51.640 Section 51.640 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing...) Definitions § 51.640 Fairly well formed. Fairly well formed means that the fruit may not have the shape...

7 CFR 51.1869 - Fairly well formed.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly well formed. 51.1869 Section 51.1869... STANDARDS) United States Standards for Fresh Tomatoes 1 Definitions § 51.1869 Fairly well formed. Fairly well formed means that the tomato is not more than moderately kidney-shaped, lop-sided, elongated...

7 CFR 51.611 - Fairly well developed.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly well developed. 51.611 Section 51.611... STANDARDS) United States Consumer Standards for Celery Stalks Definitions § 51.611 Fairly well developed. Fairly well developed means that the outer branches are not spindly or abnormally short and thin. ...

7 CFR 51.2652 - Fairly well colored.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well colored. 51.2652 Section 51.2652 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... § 51.2652 Fairly well colored. Fairly well colored means that at least 95 percent of the surface of the...

7 CFR 51.1909 - Fairly well formed.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well formed. 51.1909 Section 51.1909... STANDARDS) United States Consumer Standards for Fresh Tomatoes Definitions § 51.1909 Fairly well formed. Fairly well formed means that the tomato is not decidedly kidney-shaped, lopsided, elongated, angular, or...

7 CFR 51.575 - Fairly well blanched.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well blanched. 51.575 Section 51.575... (INSPECTION, CERTIFICATION, AND STANDARDS) United States Standards for Celery Definitions § 51.575 Fairly well blanched. Fairly well blanched means that the midrib portions of the outer branches on the stalk are...

7 CFR 51.611 - Fairly well developed.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well developed. 51.611 Section 51.611... STANDARDS) United States Consumer Standards for Celery Stalks Definitions § 51.611 Fairly well developed. Fairly well developed means that the outer branches are not spindly or abnormally short and thin. ...

7 CFR 51.581 - Fairly well formed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well formed. 51.581 Section 51.581 Agriculture..., CERTIFICATION, AND STANDARDS) United States Standards for Celery Definitions § 51.581 Fairly well formed. Fairly well formed means that the branches are reasonably straight and not more than moderately curved or...

7 CFR 51.581 - Fairly well formed.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Fairly well formed. 51.581 Section 51.581 Agriculture..., CERTIFICATION, AND STANDARDS) United States Standards for Celery Definitions § 51.581 Fairly well formed. Fairly well formed means that the branches are reasonably straight and not more than moderately curved or...

7 CFR 51.1909 - Fairly well formed.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly well formed. 51.1909 Section 51.1909... STANDARDS) United States Consumer Standards for Fresh Tomatoes Definitions § 51.1909 Fairly well formed. Fairly well formed means that the tomato is not decidedly kidney-shaped, lopsided, elongated, angular, or...

7 CFR 51.639 - Fairly well colored.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Fairly well colored. 51.639 Section 51.639 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing...) Definitions § 51.639 Fairly well colored. Fairly well colored means that except for a 1-inch circle in the...

7 CFR 51.640 - Fairly well formed.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Fairly well formed. 51.640 Section 51.640 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing...) Definitions § 51.640 Fairly well formed. Fairly well formed means that the fruit may not have the shape...

7 CFR 51.2652 - Fairly well colored.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well colored. 51.2652 Section 51.2652... STANDARDS) United States Standards for Grades for Sweet Cherries 1 Definitions § 51.2652 Fairly well colored. Fairly well colored means that at least 95 percent of the surface of the cherry shows characteristic...

7 CFR 51.703 - Fairly well colored.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly well colored. 51.703 Section 51.703 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... § 51.703 Fairly well colored. Fairly well colored means that except for a one inch circle in the...

7 CFR 51.703 - Fairly well colored.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Fairly well colored. 51.703 Section 51.703 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... § 51.703 Fairly well colored. Fairly well colored means that except for a one inch circle in the...

7 CFR 51.1830 - Fairly well colored.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well colored. 51.1830 Section 51.1830... STANDARDS) United States Standards for Grades of Florida Tangerines Definitions § 51.1830 Fairly well colored. Fairly well colored means that the surface of the fruit may have green color which does not...

7 CFR 51.639 - Fairly well colored.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly well colored. 51.639 Section 51.639 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing...) Definitions § 51.639 Fairly well colored. Fairly well colored means that except for a 1-inch circle in the...

7 CFR 51.1557 - Fairly well shaped.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly well shaped. 51.1557 Section 51.1557... STANDARDS) United States Standards for Grades of Potatoes 1 Definitions § 51.1557 Fairly well shaped. Fairly well shaped means that the potato is not materially pointed, dumbbell-shaped or otherwise materially...

7 CFR 51.1007 - Fairly well formed.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Fairly well formed. 51.1007 Section 51.1007... STANDARDS) United States Standards for Persian (Tahiti) Limes Definitions § 51.1007 Fairly well formed. Fairly well formed means that the fruit shows normal characteristic shape for the Persian variety and is...

7 CFR 51.1580 - Fairly well shaped.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well shaped. 51.1580 Section 51.1580... STANDARDS) United States Consumer Standards for Potatoes Definitions § 51.1580 Fairly well shaped. Fairly well shaped means that the appearance of the individual potato or the general appearance of the...

7 CFR 51.1830 - Fairly well colored.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly well colored. 51.1830 Section 51.1830... STANDARDS) United States Standards for Grades of Florida Tangerines Definitions § 51.1830 Fairly well colored. Fairly well colored means that the surface of the fruit may have green color which does not...

7 CFR 51.581 - Fairly well formed.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Fairly well formed. 51.581 Section 51.581 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Celery Definitions § 51.581 Fairly well formed. Fairly well formed means that the branches are...

7 CFR 51.1580 - Fairly well shaped.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly well shaped. 51.1580 Section 51.1580... STANDARDS) United States Consumer Standards for Potatoes Definitions § 51.1580 Fairly well shaped. Fairly well shaped means that the appearance of the individual potato or the general appearance of the...

7 CFR 51.581 - Fairly well formed.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly well formed. 51.581 Section 51.581 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Celery Definitions § 51.581 Fairly well formed. Fairly well formed means that the branches are...

7 CFR 51.1557 - Fairly well shaped.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Fairly well shaped. 51.1557 Section 51.1557... STANDARDS) United States Standards for Grades of Potatoes 1 Definitions § 51.1557 Fairly well shaped. Fairly well shaped means that the potato is not materially pointed, dumbbell-shaped or otherwise materially...

7 CFR 51.2652 - Fairly well colored.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly well colored. 51.2652 Section 51.2652... STANDARDS) United States Standards for Grades for Sweet Cherries 1 Definitions § 51.2652 Fairly well colored. Fairly well colored means that at least 95 percent of the surface of the cherry shows characteristic...

7 CFR 51.1557 - Fairly well shaped.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well shaped. 51.1557 Section 51.1557... STANDARDS) United States Standards for Grades of Potatoes 1 Definitions § 51.1557 Fairly well shaped. Fairly well shaped means that the potato is not materially pointed, dumbbell-shaped or otherwise materially...

7 CFR 51.639 - Fairly well colored.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well colored. 51.639 Section 51.639 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing...) Definitions § 51.639 Fairly well colored. Fairly well colored means that except for a 1-inch circle in the...

7 CFR 51.703 - Fairly well colored.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Fairly well colored. 51.703 Section 51.703 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... § 51.703 Fairly well colored. Fairly well colored means that except for a one inch circle in the...

7 CFR 51.771 - Fairly well colored.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Fairly well colored. 51.771 Section 51.771 Agriculture..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Florida Grapefruit Definitions § 51.771 Fairly well colored. Fairly well colored means that except for an aggregate area of green color which...