40 CFR 60.541 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... operation means the operation identified as Michelin-A in the Emission Standards and Engineering Division... identified as Michelin-B in the Emission Standards and Engineering Division confidential file as referenced... Michelin-C-automatic in the Emission Standards and Engineering Division confidential file as referenced in...

40 CFR 60.541 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... operation means the operation identified as Michelin-A in the Emission Standards and Engineering Division... identified as Michelin-B in the Emission Standards and Engineering Division confidential file as referenced... Michelin-C-automatic in the Emission Standards and Engineering Division confidential file as referenced in...

40 CFR 60.541 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... operation means the operation identified as Michelin-A in the Emission Standards and Engineering Division... identified as Michelin-B in the Emission Standards and Engineering Division confidential file as referenced... Michelin-C-automatic in the Emission Standards and Engineering Division confidential file as referenced in...

A novel knowledge-based system for interpreting complex engineering drawings: theory, representation, and implementation.

PubMed

Lu, Tong; Tai, Chiew-Lan; Yang, Huafei; Cai, Shijie

2009-08-01

We present a novel knowledge-based system to automatically convert real-life engineering drawings to content-oriented high-level descriptions. The proposed method essentially turns the complex interpretation process into two parts: knowledge representation and knowledge-based interpretation. We propose a new hierarchical descriptor-based knowledge representation method to organize the various types of engineering objects and their complex high-level relations. The descriptors are defined using an Extended Backus Naur Form (EBNF), facilitating modification and maintenance. When interpreting a set of related engineering drawings, the knowledge-based interpretation system first constructs an EBNF-tree from the knowledge representation file, then searches for potential engineering objects guided by a depth-first order of the nodes in the EBNF-tree. Experimental results and comparisons with other interpretation systems demonstrate that our knowledge-based system is accurate and robust for high-level interpretation of complex real-life engineering projects.

19 CFR 191.143 - Drawback entry.

Code of Federal Regulations, 2010 CFR

2010-04-01

... (CONTINUED) DRAWBACK Foreign-Built Jet Aircraft Engines Processed in the United States § 191.143 Drawback entry. (a) Filing of entry. Drawback entries covering these foreign-built jet aircraft engines shall be filed on Customs Form 7551, modified to show that the entry covers jet aircraft engines processed under...

19 CFR 191.143 - Drawback entry.

Code of Federal Regulations, 2011 CFR

2011-04-01

... (CONTINUED) DRAWBACK Foreign-Built Jet Aircraft Engines Processed in the United States § 191.143 Drawback entry. (a) Filing of entry. Drawback entries covering these foreign-built jet aircraft engines shall be filed on Customs Form 7551, modified to show that the entry covers jet aircraft engines processed under...

Transported Geothermal Energy Technoeconomic Screening Tool - Calculation Engine

DOE Data Explorer

Liu, Xiaobing

2016-09-21

This calculation engine estimates technoeconomic feasibility for transported geothermal energy projects. The TGE screening tool (geotool.exe) takes input from input file (input.txt), and list results into output file (output.txt). Both the input and ouput files are in the same folder as the geotool.exe. To use the tool, the input file containing adequate information of the case should be prepared in the format explained below, and the input file should be put into the same folder as geotool.exe. Then the geotool.exe can be executed, which will generate a output.txt file in the same folder containing all key calculation results. The format and content of the output file is explained below as well.

Development and qualification of additively manufactured parts for space

NASA Astrophysics Data System (ADS)

O'Brien, Michael J.

2018-02-01

Additive manufacturing (commonly called "3D printing") fabricates the desired final part directly from the input CAD (Computer Aided Design) file by depositing and fusing layer upon layer of the source material. New engineering designs are possible in which a single optimized part with novel topology can replace several traditional parts. The complex physics of metal deposition leads to variations in quality and to new flaws and residual stresses not seen in traditional manufacturing. Additive manufacturing currently has gaps in knowledge. Mission assurance will require: qualification and certification standards; sharing of data in handbooks; predictive models relating processing, microstructure and properties; and development of closed loop process control and non-destructive evaluation to reduce variability.

Smartfiles: An OO approach to data file interoperability

NASA Technical Reports Server (NTRS)

Haines, Matthew; Mehrotra, Piyush; Vanrosendale, John

1995-01-01

Data files for scientific and engineering codes typically consist of a series of raw data values whose descriptions are buried in the programs that interact with these files. In this situation, making even minor changes in the file structure or sharing files between programs (interoperability) can only be done after careful examination of the data file and the I/O statement of the programs interacting with this file. In short, scientific data files lack self-description, and other self-describing data techniques are not always appropriate or useful for scientific data files. By applying an object-oriented methodology to data files, we can add the intelligence required to improve data interoperability and provide an elegant mechanism for supporting complex, evolving, or multidisciplinary applications, while still supporting legacy codes. As a result, scientists and engineers should be able to share datasets with far greater ease, simplifying multidisciplinary applications and greatly facilitating remote collaboration between scientists.

77 FR 280 - Rhode Island Engine Genco LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-04

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER12-674-000] Rhode Island Engine Genco LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request for Blanket... Engine Genco LLC's application for market-based rate authority, with an accompanying rate tariff, noting...

Publications - PIR 2002-3 | Alaska Division of Geological & Geophysical

Science.gov Websites

): Philip Smith Mountains Bibliographic Reference Stevens, D.S.P., 2014, Engineering-geologic map of the Digital Geospatial Data Philip Smith Mountains: Engineering-geologic map Data File Format File Size Info

Database Deposit Service through JOIS : JAFIC File on Food Industry and Osaka Urban Engineering File

NASA Astrophysics Data System (ADS)

Kataoka, Akihiro

JICST has launched the database deposit service for the excellent quality in small-and medium size, both of which have no dissemination network. JAFIC File on Food Industry produced by the Japan Food Industry Center and Osaka Urban Engineering File by Osaka City have been in service by JOIS since March 2, 1987. In this paper the outline of the above databases is introduced in focussing on the items covered and retrieved by JOIS.

MI1AENG1

Atmospheric Science Data Center

2014-09-03

MI1AENG1 MISR Level 1A Engineering Data File Type 1: Reformatted Annotated Level 1A product for the camera engineering data, which represents indicators of sampled measurements. ... Status Production Report Read Software Files :  Data Product Specification Versioning ...

a Cache Design Method for Spatial Information Visualization in 3d Real-Time Rendering Engine

NASA Astrophysics Data System (ADS)

Dai, X.; Xiong, H.; Zheng, X.

2012-07-01

A well-designed cache system has positive impacts on the 3D real-time rendering engine. As the amount of visualization data getting larger, the effects become more obvious. They are the base of the 3D real-time rendering engine to smoothly browsing through the data, which is out of the core memory, or from the internet. In this article, a new kind of caches which are based on multi threads and large file are introduced. The memory cache consists of three parts, the rendering cache, the pre-rendering cache and the elimination cache. The rendering cache stores the data that is rendering in the engine; the data that is dispatched according to the position of the view point in the horizontal and vertical directions is stored in the pre-rendering cache; the data that is eliminated from the previous cache is stored in the eliminate cache and is going to write to the disk cache. Multi large files are used in the disk cache. When a disk cache file size reaches the limit length（128M is the top in the experiment), no item will be eliminated from the file, but a new large cache file will be created. If the large file number is greater than the maximum number that is pre-set, the earliest file will be deleted from the disk. In this way, only one file is opened for writing and reading, and the rest are read-only so the disk cache can be used in a high asynchronous way. The size of the large file is limited in order to map to the core memory to save loading time. Multi-thread is used to update the cache data. The threads are used to load data to the rendering cache as soon as possible for rendering, to load data to the pre-rendering cache for rendering next few frames, and to load data to the elimination cache which is not necessary for the moment. In our experiment, two threads are designed. The first thread is to organize the memory cache according to the view point, and created two threads: the adding list and the deleting list, the adding list index the data that should be loaded to the pre-rendering cache immediately, the deleting list index the data that is no longer visible in the rendering scene and should be moved to the eliminate cache; the other thread is to move the data in the memory and disk cache according to the adding and the deleting list, and create the download requests when the data is indexed in the adding but cannot be found either in memory cache or disk cache, eliminate cache data is moved to the disk cache when the adding list and deleting are empty. The cache designed as described above in our experiment shows reliable and efficient, and the data loading time and files I/O time decreased sharply, especially when the rendering data getting larger.

Harbeck research files donated

NASA Astrophysics Data System (ADS)

The collected papers and research files of G. Earl Harbeck (deceased), noted U.S. Geological Survey (USGS) research hydraulic engineer, have recently been donated by the USGS Gulf Coast Hydroscience Center to the Department of Civil Engineering at the University of Mississippi (University, Miss.). Harbeck performed important research in evaporation and evapotranspiration phenomena during the 1950s and 1960s that led to modern water and energy budget methods for lakes, streams, and reservoirs that are widely used today. Many of the papers in his files are unique; others have importance in the historical progression of evaporation research in lakes. Researchers or students interested in gaining access to the files may contact Robert M. Hackett, Chairman, Department of Civil Engineering, University of Mississippi, University, MS 38677, for details.

76 FR 8785 - ABB Inc.; License Amendment Request for Decommissioning of the ABB Inc., Combustion Engineering...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-15

.... Electronic Submissions (E-Filing) All documents filed in NRC adjudicatory proceedings, including a request... accordance with the NRC E-Filing rule (72 FR 49139, August 28, 2007). The E-Filing process requires... requirements of E-FilingFiling, at least ten (10) days prior to the filing deadline, the participant should...

An Analysis of SE and MBSE Concepts to Support Defence Capability Acquisition

DTIC Science & Technology

2014-09-01

Government Department of Finance and Deregulation, Canberra, ACT, August 2011. [online] URL: http://agimo.gov.au/files/2012/04/AGA_RM_v3_0.pdf ANSI...First Time, White Paper, Aberdeen Group Group, August 2011. [online] URL: http://www.aberdeen.com/Aberdeen- Library/7121/RA-system-design...Edge e-zine, IBM Software Group, August 2003. Cantor 2003b Cantor, Murray, Rational Unified Process for Systems Engineering Part I1: System

Software for Preprocessing Data from Rocket-Engine Tests

NASA Technical Reports Server (NTRS)

Cheng, Chiu-Fu

2004-01-01

Three computer programs have been written to preprocess digitized outputs of sensors during rocket-engine tests at Stennis Space Center (SSC). The programs apply exclusively to the SSC E test-stand complex and utilize the SSC file format. The programs are the following: Engineering Units Generator (EUGEN) converts sensor-output-measurement data to engineering units. The inputs to EUGEN are raw binary test-data files, which include the voltage data, a list identifying the data channels, and time codes. EUGEN effects conversion by use of a file that contains calibration coefficients for each channel. QUICKLOOK enables immediate viewing of a few selected channels of data, in contradistinction to viewing only after post-test processing (which can take 30 minutes to several hours depending on the number of channels and other test parameters) of data from all channels. QUICKLOOK converts the selected data into a form in which they can be plotted in engineering units by use of Winplot (a free graphing program written by Rick Paris). EUPLOT provides a quick means for looking at data files generated by EUGEN without the necessity of relying on the PV-WAVE based plotting software.

Software for Preprocessing Data From Rocket-Engine Tests

NASA Technical Reports Server (NTRS)

Cheng, Chiu-Fu

2003-01-01

Three computer programs have been written to preprocess digitized outputs of sensors during rocket-engine tests at Stennis Space Center (SSC). The programs apply exclusively to the SSC E test-stand complex and utilize the SSC file format. The programs are the following: (1) Engineering Units Generator (EUGEN) converts sensor-output-measurement data to engineering units. The inputs to EUGEN are raw binary test-data files, which include the voltage data, a list identifying the data channels, and time codes. EUGEN effects conversion by use of a file that contains calibration coefficients for each channel. (2) QUICKLOOK enables immediate viewing of a few selected channels of data, in contradistinction to viewing only after post-test processing (which can take 30 minutes to several hours depending on the number of channels and other test parameters) of data from all channels. QUICKLOOK converts the selected data into a form in which they can be plotted in engineering units by use of Winplot. (3) EUPLOT provides a quick means for looking at data files generated by EUGEN without the necessity of relying on the PVWAVE based plotting software.

Pacer Comet 4: Automated Jet Engine Testing of a TF33-P100 Pratt & Whitney Engine

NASA Astrophysics Data System (ADS)

Mason, Rex Bolding

Pacer Comet 4 found its life out of necessity to replace an obsolescent Pacer Comet 3 engine test system at Tinker AFB in Oklahoma City, OK. Pacer Comet 3 (PC3) was created and installed in the early 1980's to test jet engines from a wide range of planes. PC3 had several problems from a maintenance standpoint: contractors designed and installed the system but the contract did not include the OEM data package. Without drawings or design knowledge, fixing the smallest of problems could turn into a multi-day project. In addition to high cost, as the OEM companies of proprietary parts went out of business, it became impossible to find a replacement for a failed part. These issues set the framework for the Pacer Comet 4 (PC4) system. PC4 was created as an organic AF and Department of Defense collaboration to fix the issues with PC3. PC4 provides the customer with a complete data package including multiple drawing sets and data sheets for all parts used, as well as design files for all PCBs created in house. PC4 has a standard to use commercially available off the shelf parts (COTS). The reason for this is sustainability in maintenance. If a part is to fail, it should be able to be purchased from any manufacturer that meets the specs of the original product. No proprietary parts are used, except as directed by the engine's OEM. This thesis will focus on the design and installation of the on-frame data acquisition PC4 system for the Pratt & Whitney TF33-P100A-QEC engine that is currently in use on the E3 Sentry. This thesis will show efficiency improvements for maintenance sustainability (70% cabling reduction) as well as discuss performance improvements in both test and production environments.

[In vitro comparison of root canal preparation with step-back technique and GT rotary file--a nickel-titanium engine driven rotary instrument system].

PubMed

Krajczár, Károly; Tóth, Vilmos; Nyárády, Zoltán; Szabó, Gyula

2005-06-01

The aim of the authors' study was to compare the remaining root canal wall thickness and the preparation time of root canals, prepared either with step-back technique, or with GT Rotary File, an engine driven nickel-titanium rotary instrument system. Twenty extracted molars were decoronated. Teeth were divided in two groups. In Group 1 root canals were prepared with step-back technique. In Group 2 GT Rotary File System was utilized. Preoperative vestibulo-oral X-ray pictures were taken from all teeth with radiovisiograph (RVG). The final preparations at the mesiobuccal canals (MB) were performed with size #30 and palatinal/distal canals with size #40 instruments. Postoperative RVG pictures were taken ensuring the preoperative positioning. The working time was measured in seconds during each preparation. The authors also assessed the remaining root canal wall thickness at 3, 6 and 9 mm from the radiological apex, comparing the width of the canal walls of the vestibulo-oral projections on pre- and postoperative RVG pictures both mesially and buccally. The ratios of the residual and preoperative root canal wall thickness were calculated and compared. The largest difference was found at the MB canals of the coronal and middle third level of the root, measured on the distal canal wall. The ratio of the remaining dentin wall thickness at the coronal and the middle level in the case of step-back preparation was 0.605 and 0.754, and 0.824 and 0.895 in the cases of GT files respectively. The preparation time needed for GT Rotary File System was altogether 68.7% (MB) and 52.5% (D/P canals) of corresponding step-back preparation times. The use of GT Rotary File with comparison of standard step-back method resulted in a shortened preparation time and excessive damage of the coronal part of the root canal could be avoided.

MPT Prediction of Aircraft-Engine Fan Noise

NASA Technical Reports Server (NTRS)

Connell, Stuart D.

2004-01-01

A collection of computer programs has been developed that implements a procedure for predicting multiple-pure-tone (MPT) noise generated by fan blades of an aircraft engine (e.g., a turbofan engine). MPT noise arises when the fan is operating with supersonic relative tip Mach No. Under this flow condition, there is a strong upstream running shock. The strength and position of this shock are very sensitive to blade geometry variations. For a fan where all the blades are identical, the primary tone observed upstream of the fan will be the blade passing frequency. If there are small variations in geometry between blades, then tones below the blade passing frequency arise MPTs. Stagger angle differences as small as 0.1 can give rise to significant MPT. It is also noted that MPT noise is more pronounced when the fan is operating in an unstarted mode. Computational results using a three-dimensional flow solver to compute the complete annulus flow with non-uniform fans indicate that MPT noise can be estimated in a relatively simple way. Hence, once the effect of a typical geometry variation of one blade in an otherwise uniform blade row is known, the effect of all the blades being different can be quickly computed via superposition. Two computer programs that were developed as part of this work are used in conjunction with a user s computational fluid dynamics (CFD) code to predict MPT spectra for a fan with a specified set of geometric variations: (1) The first program ROTBLD reads the users CFD solution files for a single blade passage via an API (Application Program Interface). There are options to replicate and perturb the geometry with typical variations stagger, camber, thickness, and pitch. The multi-passage CFD solution files are then written in the user s file format using the API. (2) The second program SUPERPOSE requires two input files: the first is the circumferential upstream pressure distribution extracted from the CFD solution on the multi-passage mesh, the second file defines the geometry variations of each blade in a complete fan. Superposition is used to predict the spectra resulting from the geometric variations.

47 CFR 4.2 - Availability of reports filed under this part.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Availability of reports filed under this part. 4.2 Section 4.2 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL DISRUPTIONS TO COMMUNICATIONS General § 4.2 Availability of reports filed under this part. Reports filed under this part will be...

47 CFR 4.2 - Availability of reports filed under this part.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 1 2012-10-01 2012-10-01 false Availability of reports filed under this part. 4.2 Section 4.2 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL DISRUPTIONS TO COMMUNICATIONS General § 4.2 Availability of reports filed under this part. Reports filed under this part will be...

33 CFR 211.145 - Filing of application.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Section 211.145 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE REAL ESTATE ACTIVITIES OF THE CORPS OF ENGINEERS IN CONNECTION WITH CIVIL WORKS PROJECTS Conveyances for Public Port Or Industrial Facilities § 211.145 Filing of application. Any agency interested in...

33 CFR 211.145 - Filing of application.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Section 211.145 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE REAL ESTATE ACTIVITIES OF THE CORPS OF ENGINEERS IN CONNECTION WITH CIVIL WORKS PROJECTS Conveyances for Public Port Or Industrial Facilities § 211.145 Filing of application. Any agency interested in...

Dentine chips produced by nickel-titanium rotary instruments.

PubMed

Guppy, D R; Curtis, R V; Ford, T R

2000-12-01

This study aimed to compare the cross-sectional shape of two nickel-titanium rotary instruments, namely ProFile and Quantec files, both ISO 25, 0.06 taper, and sought to relate this to the chips produced by cutting dentine. A limited comparison was made with stainless steel engine reamers. First, five files of each type were sectioned transversely at 12 mm, 8 mm and 4 mm from the tip and examined by scanning electron microscopy. The cutting angles were assessed by a direct measurement technique which allowed for the inclination of a cutting edge to the root canal. Second, eight samples of cutting debris were collected from instrumentation by each type of nickel-titanium file and four samples from the engine reamers. The major and minor axis, area and roundness of the dentine chips in each sample were measured using computerized particle analysis. The results demonstrated that all files had a negative cutting angle which varied at the different levels (ProFiles range 69.4 degrees to 58.4 degrees and Quantec range 74.8 degrees to 56.8 degrees). The consistency within files of the same type was good as demonstrated by low standard deviations, except for Quantec files at the 4 mm level where higher standard deviations of 4.1 degrees and 5.5 degrees for the two blades were found. The chip analysis showed significant differences between chips produced by ProFile and Quantec files (P < 0.05). The latter were larger and rounder. The chips from the ProFile and the engine reamer chips were similar in dimension (P > 0.05). No simple relationship existed between file geometry and the dentine chips produced during instrumentation.

76 FR 67163 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-31

... Massachusetts Electric Company submits tariff filing per 35.12: Pioneer Valley Design & Preliminary Engineering Agreement for Switchyard Layout to be effective 10/20/2011. Filed Date: 10/19/2011. Accession Number...

Software for Preprocessing Data From Rocket-Engine Tests

NASA Technical Reports Server (NTRS)

Cheng, Chiu-Fu

2002-01-01

Three computer programs have been written to preprocess digitized outputs of sensors during rocket-engine tests at Stennis Space Center (SSC). The programs apply exclusively to the SSC "E" test-stand complex and utilize the SSC file format. The programs are the following: 1) Engineering Units Generator (EUGEN) converts sensor-output-measurement data to engineering units. The inputs to EUGEN are raw binary test-data files, which include the voltage data, a list identifying the data channels, and time codes. EUGEN effects conversion by use of a file that contains calibration coefficients for each channel; 2) QUICKLOOK enables immediate viewing of a few selected channels of data, in contradistinction to viewing only after post test processing (which can take 30 minutes to several hours depending on the number of channels and other test parameters) of data from all channels. QUICKLOOK converts the selected data into a form in which they can be plotted in engineering units by use of Winplot (a free graphing program written by Rick Paris); and 3) EUPLOT provides a quick means for looking at data files generated by EUGEN without the necessity of relying on the PVWAVE based plotting software.

MT3DMS: A Modular Three-Dimensional Multispecies Transport Model for Simulation of Advection, Dispersion, and Chemical Reactions of Contaminants in Groundwater Systems; Documentation and User’s Guide

DTIC Science & Technology

1999-12-01

addition, the data files saved in the POINT format can include an optional header which is compatible with Amtec Engineering’s 2-D and 3-D visualization...34.DAT" file so that the file can be used directly by Amtec Engineering’s 2-D and 3-D visualization package Tecplot©. The ARRAY and POINT formats are

This photocopy of an engineering drawing shows the floor plan ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

This photocopy of an engineering drawing shows the floor plan of the Liner Lab, including room functions. Austin, Field & Fry, Architects Engineers, 22311 West Third Street, Los Angeles 57, California: Edwards Test Station Complex Phase II, Jet Propulsion Laboratory, California Institute of Technology, Edwards Air Force Base, Edwards, California: "Liner Laboratory, Floor Plan and Schedules," drawing no. E33/4-2, 26 June 1962. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: engineering drawings of structures at JPL Edwards Facility. Drawings on file at JPL Plant Engineering, Pasadena, California. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: engineering drawings of structures at JPL Edwards Facility. Drawings on file at JPL Plant Engineering, Pasadena, California - Jet Propulsion Laboratory Edwards Facility, Liner Laboratory, Edwards Air Force Base, Boron, Kern County, CA

78 FR 31914 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-28

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Combined Notice of Filings 1 Take notice...: ISO New England Inc. Rhode Island Engine Genco LLC Resource Termination Filing. Filed Date: 5/17/13... information, call (866) 208-3676 (toll free). For TTY, call (202) 502-8659. Dated: May 17, 2013. Nathaniel J...

Automated Big Data Analysis in Bottom-up and Targeted Proteomics

PubMed Central

van der Plas-Duivesteijn, Suzanne; Domański, Dominik; Smith, Derek; Borchers, Christoph; Palmblad, Magnus; Mohamme, Yassene

2014-01-01

Similar to other data intensive sciences, analyzing mass spectrometry-based proteomics data involves multiple steps and diverse software using different algorithms and data formats and sizes. Besides that the distributed and evolving nature of the data in online repositories, another challenge is that a scientists have to deal with many steps of analysis pipelines. A documented data processing is also becoming an essential part for the overall reproducibility of the results. Thanks to different e-Science initiatives, scientific workflow engines have become a means for automated, sharable and reproducible data processing. While these are designed as general tools, they can be employed to solve different challenges that we are facing in handling our Big Data. Here we present three use cases: improving the performance of different spectral search engines by decomposing input data and recomposing the resulting files, building spectral libraries from more than 20 million spectra, and integrating information from multiple resources to select most appropriate peptides for targeted proteomics analyses. The three use cases demonstrate different challenges in exploiting proteomics data analysis. In the first we integrate local and cloud processing resources in order to obtain better performance resulting in more than 30-fold speed improvement. By considering search engines as legacy software our solution is applicable to multiple search algorithms. The second use case is an example of automated processing of many data files of different sizes and locations, starting with raw data and ending with the final, ready-to-use library. This demonstrates the robustness and fault tolerance when dealing with huge amount data stored in multiple files. The third use case demonstrates retrieval and integration of information and data from multiple online repositories. In addition to the diversity of data formats and Web interfaces, this use case also illustrates how to deal with incomplete data.

15 CFR Appendix B to Part 30 - AES Filing Codes

Code of Federal Regulations, 2013 CFR

2013-01-01

... 15 Commerce and Foreign Trade 1 2013-01-01 2013-01-01 false AES Filing Codes B Appendix B to Part..., DEPARTMENT OF COMMERCE FOREIGN TRADE REGULATIONS Pt. 30, App. B Appendix B to Part 30—AES Filing Codes Part I... Manifest Use Only by AES Carriers) AE Shipment information filed through AES (See §§ 30.50 through 30.58...

15 CFR Appendix B to Part 30 - AES Filing Codes

Code of Federal Regulations, 2012 CFR

2012-01-01

... 15 Commerce and Foreign Trade 1 2012-01-01 2012-01-01 false AES Filing Codes B Appendix B to Part..., DEPARTMENT OF COMMERCE FOREIGN TRADE REGULATIONS Pt. 30, App. B Appendix B to Part 30—AES Filing Codes Part I... Manifest Use Only by AES Carriers) AE Shipment information filed through AES (See §§ 30.50 through 30.58...

Designing a data portal for synthesis modeling

NASA Astrophysics Data System (ADS)

Holmes, M. A.

2006-12-01

Processing of field and model data in multi-disciplinary integrated science studies is a vital part of synthesis modeling. Collection and storage techniques for field data vary greatly between the participating scientific disciplines due to the nature of the data being collected, whether it be in situ, remotely sensed, or recorded by automated data logging equipment. Spreadsheets, personal databases, text files and binary files are used in the initial storage and processing of the raw data. In order to be useful to scientists, engineers and modelers the data need to be stored in a format that is easily identifiable, accessible and transparent to a variety of computing environments. The Model Operations and Synthesis (MOAS) database and associated web portal were created to provide such capabilities. The industry standard relational database is comprised of spatial and temporal data tables, shape files and supporting metadata accessible over the network, through a menu driven web-based portal or spatially accessible through ArcSDE connections from the user's local GIS desktop software. A separate server provides public access to spatial data and model output in the form of attributed shape files through an ArcIMS web-based graphical user interface.

Software Engineering Laboratory (SEL) Data Base Maintenance System (DBAM) user's guide and system description

NASA Technical Reports Server (NTRS)

Lo, P. S.; Card, D.

1983-01-01

The Software Engineering Laboratory (SEL) Data Base Maintenance System (DBAM) is explained. The various software facilities of the SEL, DBAM operating procedures, and DBAM system information are described. The relationships among DBAM components (baseline diagrams), component descriptions, overlay descriptions, indirect command file listings, file definitions, and sample data collection forms are provided.

National Dam Safety Program. Bray Lake Dam (MO 30098), Osage - Gasconade Basin, Phelps County, Missouri. Phase I Inspection Report.

DTIC Science & Technology

1979-12-01

Geologist Applied Engineering & Urban Geology Missouri Geological Survey May 6, 1974 Sheet 6, Appendix B For file Only DEAN LAKE SITE (Formerly Bray...time to point out these problems that you have been discussing. ,J. Hadley Williams Geologist and Chief Applied Engineering & Urban Geology Missouri...Geologist Applied Engineering & Urban Geology Missouri Geological Survey June 27, 1974 Sheet 9, Appendix B FOR FILE ONLY L • BRAYS LAKE RECONNAISSANCE PHELPS

Equipment Location Plan, partial basement plan. (Includes identification of each ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Equipment Location Plan, partial basement plan. (Includes identification of each separate CPU, tape drive, hard drive, printer, keyboard, etc., within the data processing center in the southeast part of the basement.) March Air Force Base, Riverside, California, Combat Operations Center, 465-L DPC. By International Electric Corporation, Paramus, New Jersey (3/5/62); for Moffatt and Nichol, Engineers, 122 West Fifth Street, Long Beach, California; for the Corps of Engineers, U.S. Army, Office of the District Engineer, Los Angeles, California. Drawing no. AW-60-02-03, sheet no. 100, approved March, 1962; specifications no. OCI-62-66; D.O. series AW 1596/100, Rev. "A"; file drawer 1290. Last revised 3 October 1966. Scale one-quarter inch to one foot. 28.75x40.5 inches. ink on linen - March Air Force Base, Strategic Air Command, Combat Operations Center, 5220 Riverside Drive, Moreno Valley, Riverside County, CA

Equipment Location Plan, partial first floor plan. (Includes identification of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Equipment Location Plan, partial first floor plan. (Includes identification of each separate CPU, tape drive, hard drive, printer, keyboard, etc., within the data processing center in the southwest part of the first floor.) March Air Force Base, Riverside, California, Combat Operations Center, 465-L EDTCC/EDLCC. By International Electric Corporation, Paramus, New Jersey (3/5/62); for Moffatt and Nichol, Engineers, 122 West Fifth Street, Long Beach, California; for the Corps of Engineers, U.S. Army, Office of the District Engineer, Los Angeles, California. Drawing no. AW-60-02-03, sheet no. 85, approved March, 1962; specifications no. OCI-62-66; D.O. series AW 1596/85, Rev. "A"; file drawer 1290. Last revised 3 October 1966. Scale one-quarter inch to one foot. 28.75x40.5 inches. ink on linen - March Air Force Base, Strategic Air Command, Combat Operations Center, 5220 Riverside Drive, Moreno Valley, Riverside County, CA

PIPSI/Navy - Rapid Evaluation of Propulsion System Effects for the Navy Gas Turbine Engine Code, NEPCOMP

DTIC Science & Technology

1979-10-11

E.TqIE’JI*c*H* rt IaT F : rti5’ :TFL’-1H E’rl-aFiw liSsTFI’JIt1 riSET.Ir’ 11cisar1 tnt .L Qsa 41W HLUTEEST rU I- AUE DF 1 N(..’t’FE. HUIETO T A ’E...TE’STOLIT UScEF.: LJFABF1’ WPi:Sri281TTY F. ILEES(S) READ’,~ 3FILE NAME FILE CONTENTS BOEING1 Dry Turbofan Engine Uninstalled Data BOEING2 Afterburning ...Turbofan Engine Uninstalled Data BONGTJD Dry Turbojet Engine Uninstalled Data £BONGTJW Afterburning Turbojet Engine Uninstalled Data NADC7 Source Deck

46 CFR Appendix A to Part 531 - Instructions for the Filing of NSAs

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 9 2010-10-01 2010-10-01 false Instructions for the Filing of NSAs A Appendix A to Part... NVOCC SERVICE ARRANGEMENTS Pt. 531, App. A Appendix A to Part 531—Instructions for the Filing of NSAs NSAs shall be filed in accordance with the instructions found on the Commission's home page, http://www...

46 CFR Appendix A to Part 531 - Instructions for the Filing of NSAs

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 9 2014-10-01 2014-10-01 false Instructions for the Filing of NSAs A Appendix A to Part... NVOCC SERVICE ARRANGEMENTS Pt. 531, App. A Appendix A to Part 531—Instructions for the Filing of NSAs NSAs shall be filed in accordance with the instructions found on the Commission's home page, http://www...

46 CFR Appendix A to Part 531 - Instructions for the Filing of NSAs

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 9 2011-10-01 2011-10-01 false Instructions for the Filing of NSAs A Appendix A to Part... NVOCC SERVICE ARRANGEMENTS Pt. 531, App. A Appendix A to Part 531—Instructions for the Filing of NSAs NSAs shall be filed in accordance with the instructions found on the Commission's home page, http://www...

46 CFR Appendix A to Part 531 - Instructions for the Filing of NSAs

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 9 2013-10-01 2013-10-01 false Instructions for the Filing of NSAs A Appendix A to Part... NVOCC SERVICE ARRANGEMENTS Pt. 531, App. A Appendix A to Part 531—Instructions for the Filing of NSAs NSAs shall be filed in accordance with the instructions found on the Commission's home page, http://www...

46 CFR Appendix A to Part 531 - Instructions for the Filing of NSAs

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 9 2012-10-01 2012-10-01 false Instructions for the Filing of NSAs A Appendix A to Part... NVOCC SERVICE ARRANGEMENTS Pt. 531, App. A Appendix A to Part 531—Instructions for the Filing of NSAs NSAs shall be filed in accordance with the instructions found on the Commission's home page, http://www...

76 FR 67723 - CRD Hydroelectric, LLC; Notice of Application To Amend License and Accepted for Filing...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-02

.... Name of Project: Red Rock Hydroelectric Project. f. Location: The project is located at the U.S. Army Corps of Engineers Lake Red Rock Dam on the Des Moines River in Marion County, Iowa. g. Filed Pursuant.... Army Corps of Engineers' Lake Red Rock Dam. The applicant's proposal also includes the installation of...

4. Historic photograph, October 14, 1944. Interior view, north from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. Historic photograph, October 14, 1944. Interior view, north from south end. U.S. Army Photographer: Corps of Engineers, New England Division, file Number 112. (Copies located at U.S. Army Corps of Engineers, New England Division, Waltham, Massachusetts; and Historical Files, Public Affairs Office, AMTL, Watertown). - Watertown Arsenal, Building No. 292, Welch Avenue, Watertown, Middlesex County, MA

ArrayBridge: Interweaving declarative array processing with high-performance computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xing, Haoyuan; Floratos, Sofoklis; Blanas, Spyros

Scientists are increasingly turning to datacenter-scale computers to produce and analyze massive arrays. Despite decades of database research that extols the virtues of declarative query processing, scientists still write, debug and parallelize imperative HPC kernels even for the most mundane queries. This impedance mismatch has been partly attributed to the cumbersome data loading process; in response, the database community has proposed in situ mechanisms to access data in scientific file formats. Scientists, however, desire more than a passive access method that reads arrays from files. This paper describes ArrayBridge, a bi-directional array view mechanism for scientific file formats, that aimsmore » to make declarative array manipulations interoperable with imperative file-centric analyses. Our prototype implementation of ArrayBridge uses HDF5 as the underlying array storage library and seamlessly integrates into the SciDB open-source array database system. In addition to fast querying over external array objects, ArrayBridge produces arrays in the HDF5 file format just as easily as it can read from it. ArrayBridge also supports time travel queries from imperative kernels through the unmodified HDF5 API, and automatically deduplicates between array versions for space efficiency. Our extensive performance evaluation in NERSC, a large-scale scientific computing facility, shows that ArrayBridge exhibits statistically indistinguishable performance and I/O scalability to the native SciDB storage engine.« less

76 FR 77992 - Combined Notice of Filings #2

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-15

.... Description: ISO New England Inc. submits tariff filing per 35: Revisions to ISO-NE FAP Compliance Order--Part...: Revisions to ISO-NE FAP Compliance Filing--Part 2 of 2 to be effective 5/1/2012. Filed Date: 12/8/11...

Incorporating uncertainty in RADTRAN 6.0 input files.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dennis, Matthew L.; Weiner, Ruth F.; Heames, Terence John

Uncertainty may be introduced into RADTRAN analyses by distributing input parameters. The MELCOR Uncertainty Engine (Gauntt and Erickson, 2004) has been adapted for use in RADTRAN to determine the parameter shape and minimum and maximum of the distribution, to sample on the distribution, and to create an appropriate RADTRAN batch file. Coupling input parameters is not possible in this initial application. It is recommended that the analyst be very familiar with RADTRAN and able to edit or create a RADTRAN input file using a text editor before implementing the RADTRAN Uncertainty Analysis Module. Installation of the MELCOR Uncertainty Engine ismore » required for incorporation of uncertainty into RADTRAN. Gauntt and Erickson (2004) provides installation instructions as well as a description and user guide for the uncertainty engine.« less

78 FR 16848 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-19

... that the Commission received the following electric corporate filings: Docket Numbers: EC13-80-000... the Commission received the following electric rate filings: Docket Numbers: ER13-915-000. Applicants... Engineering. Description: Form 556--Notice of self-certification of qualifying cogeneration facility status of...

Chemomechanical preparation by hand instrumentation and by Mtwo engine-driven rotary files, an ex vivo study.

PubMed

Krajczár, Károly; Tigyi, Zoltán; Papp, Viktória; Marada, Gyula; Sára, Jeges; Tóth, Vilmos

2012-07-01

To compare the disinfecting efficacy of the sodium hypochlorite irrigation by root canal preparation with stainless steel hand files, taper 0.02 and nickel-titanium Mtwo files with taper 0.04-0.06. 40 extracted human teeth were sterilized, and then inoculated with Enterococcus faecalis (ATCC 29212). After 6 day incubation time the root canals were prepared by hand with K-files (n=20) and by engine-driven Mtwo files (VDW, Munich, Germany) (n=20). Irrigation was carried out with 2.5% NaOCl in both cases. Samples were taken and determined in colony forming units (CFU) from the root canals before and after the preparation with instruments #25 and #35. Significant reduction in bacterial count was determined after filing at both groups. The number of bacteria kept on decreasing with the extension of apical preparation diameter. There was no significant difference between the preparation sizes in the bacterial counts after hand or engine-driven instrumentation at the same apical size. Statistical analysis was carried out with Mann-Whitney test, paired t-test and independent sample t-test. Significant reduction in CFU was achieved after the root canal preparation completed with 2.5% NaOCl irrigation, both with stainless steel hand or nickel-titanium rotary files. The root canal remained slightly infected after chemo mechanical preparation in both groups. Key words:Chemomechanical preparation, root canal disinfection, nickel-titanium, conicity, greater taper, apical size.

Chemomechanical preparation by hand instrumentation and by Mtwo engine-driven rotary files, an ex vivo study

PubMed Central

Krajczár, Károly; Tigyi, Zoltán; Papp, Viktória; Sára, Jeges; Tóth, Vilmos

2012-01-01

Objective: To compare the disinfecting efficacy of the sodium hypochlorite irrigation by root canal preparation with stainless steel hand files, taper 0.02 and nickel-titanium Mtwo files with taper 0.04-0.06. Study Design: 40 extracted human teeth were sterilized, and then inoculated with Enterococcus faecalis (ATCC 29212). After 6 day incubation time the root canals were prepared by hand with K-files (n=20) and by engine-driven Mtwo files (VDW, Munich, Germany) (n=20). Irrigation was carried out with 2.5% NaOCl in both cases. Samples were taken and determined in colony forming units (CFU) from the root canals before and after the preparation with instruments #25 and #35. Results: Significant reduction in bacterial count was determined after filing at both groups. The number of bacteria kept on decreasing with the extension of apical preparation diameter. There was no significant difference between the preparation sizes in the bacterial counts after hand or engine-driven instrumentation at the same apical size. Statistical analysis was carried out with Mann-Whitney test, paired t-test and independent sample t-test. Conclusions: Significant reduction in CFU was achieved after the root canal preparation completed with 2.5% NaOCl irrigation, both with stainless steel hand or nickel-titanium rotary files. The root canal remained slightly infected after chemo mechanical preparation in both groups. Key words:Chemomechanical preparation, root canal disinfection, nickel-titanium, conicity, greater taper, apical size. PMID:24558545

NASA Thesaurus Data File

NASA Technical Reports Server (NTRS)

2012-01-01

The NASA Thesaurus contains the authorized NASA subject terms used to index and retrieve materials in the NASA Aeronautics and Space Database (NA&SD) and NASA Technical Reports Server (NTRS). The scope of this controlled vocabulary includes not only aerospace engineering, but all supporting areas of engineering and physics, the natural space sciences (astronomy, astrophysics, planetary science), Earth sciences, and the biological sciences. The NASA Thesaurus Data File contains all valid terms and hierarchical relationships, USE references, and related terms in machine-readable form. The Data File is available in the following formats: RDF/SKOS, RDF/OWL, ZThes-1.0, and CSV/TXT.

Exhaust heated hydrogen and oxygen producing catalytic converter for combustion engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schreiber, E.T.

1977-07-26

A steam generator is provided in operative association with a source of water and the exhaust system of a combustion engine including an air induction system provided with primary fuel inlet structure and supplemental fuel inlet structure. The steam generator derives its heat for converting water into steam from the exhaust system of the combustion engine and the steam generator includes a steam outlet communicated with and opening into one end of an elongated tubular housing disposed in good heat transfer relation with the exhaust system of the combustion engine and having a gas outlet at its other end communicatedmore » with the supplemental fuel inlet of the induction system. The tubular housing has iron filings disposed therein and is in such heat transfer relation with the exhaust system of the combustion engine so as to elevate the temperature of steam passing therethrough and to heat the iron filings to the extent that passage of the heated steam over the heated filings will result in hydrogen and oxygen gas being produced in the tubular housing for subsequent passage to the supplemental fuel inlet of the combustion engine induction system.« less

Perl Embedded in PTC's Pro/ENGINEER, Version 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

2003-12-22

Pro-PERL (AKA Pro/PERL) is a Perl extension to the PTC Pro/TOOLKIT API to the PTC Pro/ENGINEER CAD application including an embedded interpreter. It can be used to automate and customize Pro/ENGINEER, create Vendor Neutral Archive (VNA) format files and re-create CAD models from the VNA files. This has applications in sanitizing classified CAD models created in a classified environment for transfer to an open environment, creating template models for modification to finished models by non-expert users, and transfer of design intent data to other modeling technologies.

33 CFR 211.105 - Filing of application.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Filing of application. 211.105... DEFENSE REAL ESTATE ACTIVITIES OF THE CORPS OF ENGINEERS IN CONNECTION WITH CIVIL WORKS PROJECTS... Navigation Project in Oklahoma, to Former Owners § 211.105 Filing of application. Application for...

33 CFR 211.105 - Filing of application.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Filing of application. 211.105... DEFENSE REAL ESTATE ACTIVITIES OF THE CORPS OF ENGINEERS IN CONNECTION WITH CIVIL WORKS PROJECTS... Navigation Project in Oklahoma, to Former Owners § 211.105 Filing of application. Application for...

Introduction to Heat Pipes

NASA Technical Reports Server (NTRS)

Ku, Jentung

2015-01-01

This is the presentation file for the short course Introduction to Heat Pipes, to be conducted at the 2015 Thermal Fluids and Analysis Workshop, August 3-7, 2015, Silver Spring, Maryland. NCTS 21070-15. Course Description: This course will present operating principles of the heat pipe with emphases on the underlying physical processes and requirements of pressure and energy balance. Performance characterizations and design considerations of the heat pipe will be highlighted. Guidelines for thermal engineers in the selection of heat pipes as part of the spacecraft thermal control system, testing methodology, and analytical modeling will also be discussed.

Spectrum orbit utilization program technical manual SOUP5 Version 3.8

NASA Technical Reports Server (NTRS)

Davidson, J.; Ottey, H. R.; Sawitz, P.; Zusman, F. S.

1984-01-01

The underlying engineering and mathematical models as well as the computational methods used by the SOUP5 analysis programs, which are part of the R2BCSAT-83 Broadcast Satellite Computational System, are described. Included are the algorithms used to calculate the technical parameters and references to the relevant technical literature. The system provides the following capabilities: requirements file maintenance, data base maintenance, elliptical satellite beam fitting to service areas, plan synthesis from specified requirements, plan analysis, and report generation/query. Each of these functions are briefly described.

On the Use of CAD-Native Predicates and Geometry in Surface Meshing

NASA Technical Reports Server (NTRS)

Aftosmis, M. J.

1999-01-01

Several paradigms for accessing computer-aided design (CAD) geometry during surface meshing for computational fluid dynamics are discussed. File translation, inconsistent geometry engines, and nonnative point construction are all identified as sources of nonrobustness. The paper argues in favor of accessing CAD parts and assemblies in their native format, without translation, and for the use of CAD-native predicates and constructors in surface mesh generation. The discussion also emphasizes the importance of examining the computational requirements for exact evaluation of triangulation predicates during surface meshing.

Sparse Coding for N-Gram Feature Extraction and Training for File Fragment Classification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Felix; Quach, Tu-Thach; Wheeler, Jason

File fragment classification is an important step in the task of file carving in digital forensics. In file carving, files must be reconstructed based on their content as a result of their fragmented storage on disk or in memory. Existing methods for classification of file fragments typically use hand-engineered features such as byte histograms or entropy measures. In this paper, we propose an approach using sparse coding that enables automated feature extraction. Sparse coding, or sparse dictionary learning, is an unsupervised learning algorithm, and is capable of extracting features based simply on how well those features can be used tomore » reconstruct the original data. With respect to file fragments, we learn sparse dictionaries for n-grams, continuous sequences of bytes, of different sizes. These dictionaries may then be used to estimate n-gram frequencies for a given file fragment, but for significantly larger n-gram sizes than are typically found in existing methods which suffer from combinatorial explosion. To demonstrate the capability of our sparse coding approach, we used the resulting features to train standard classifiers such as support vector machines (SVMs) over multiple file types. Experimentally, we achieved significantly better classification results with respect to existing methods, especially when the features were used in supplement to existing hand-engineered features.« less

Sparse Coding for N-Gram Feature Extraction and Training for File Fragment Classification

DOE PAGES

Wang, Felix; Quach, Tu-Thach; Wheeler, Jason; ...

2018-04-05

File fragment classification is an important step in the task of file carving in digital forensics. In file carving, files must be reconstructed based on their content as a result of their fragmented storage on disk or in memory. Existing methods for classification of file fragments typically use hand-engineered features such as byte histograms or entropy measures. In this paper, we propose an approach using sparse coding that enables automated feature extraction. Sparse coding, or sparse dictionary learning, is an unsupervised learning algorithm, and is capable of extracting features based simply on how well those features can be used tomore » reconstruct the original data. With respect to file fragments, we learn sparse dictionaries for n-grams, continuous sequences of bytes, of different sizes. These dictionaries may then be used to estimate n-gram frequencies for a given file fragment, but for significantly larger n-gram sizes than are typically found in existing methods which suffer from combinatorial explosion. To demonstrate the capability of our sparse coding approach, we used the resulting features to train standard classifiers such as support vector machines (SVMs) over multiple file types. Experimentally, we achieved significantly better classification results with respect to existing methods, especially when the features were used in supplement to existing hand-engineered features.« less

15 CFR Appendix D to Part 30 - AES Filing Citation, Exemption and Exclusion Legends

Code of Federal Regulations, 2013 CFR

2013-01-01

... 15 Commerce and Foreign Trade 1 2013-01-01 2013-01-01 false AES Filing Citation, Exemption and... Appendix D to Part 30—AES Filing Citation, Exemption and Exclusion Legends I. USML Proof of Filing Citation AES ITN Example: AES X20060101987654. II. AES Proof of Filing Citation subpart A § 30.7 AES ITN...

15 CFR Appendix D to Part 30 - AES Filing Citation, Exemption and Exclusion Legends

Code of Federal Regulations, 2011 CFR

2011-01-01

... 15 Commerce and Foreign Trade 1 2011-01-01 2011-01-01 false AES Filing Citation, Exemption and... Appendix D to Part 30—AES Filing Citation, Exemption and Exclusion Legends I. USML Proof of Filing Citation AES ITN Example: AES X20060101987654. II. AES Proof of Filing Citation subpart A § 30.7 AES ITN...

15 CFR Appendix D to Part 30 - AES Filing Citation, Exemption and Exclusion Legends

Code of Federal Regulations, 2012 CFR

2012-01-01

... 15 Commerce and Foreign Trade 1 2012-01-01 2012-01-01 false AES Filing Citation, Exemption and... Appendix D to Part 30—AES Filing Citation, Exemption and Exclusion Legends I. USML Proof of Filing Citation AES ITN Example: AES X20060101987654. II. AES Proof of Filing Citation subpart A § 30.7 AES ITN...

15 CFR Appendix D to Part 30 - AES Filing Citation, Exemption and Exclusion Legends

Code of Federal Regulations, 2014 CFR

2014-01-01

... 15 Commerce and Foreign Trade 1 2014-01-01 2014-01-01 false AES Filing Citation, Exemption and... Appendix D to Part 30—AES Filing Citation, Exemption and Exclusion Legends I. USML Proof of Filing Citation AES ITN Example: AES X20060101987654. II. AES Proof of Filing Citation subpart A § 30.7 AES ITN...

76 FR 64003 - Airworthiness Directives; WYTWORNIA SPRZETU KOMUNIKACYJNEGO (WSK) “PZL-RZESZOW”-SPOLKA AKCYJNA...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-17

... CONTACT: James Lawrence, Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller..., Manager, Engine and Propeller Directorate, Aircraft Certification Service. [FR Doc. 2011-26274 Filed 10-14... Turboshaft Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; correction...

D0 Superconducting Solenoid Quench Data and Slow Dump Data Acquisition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Markley, D.; /Fermilab

1998-06-09

This Dzero Engineering note describes the method for which the 2 Tesla Superconducting Solenoid Fast Dump and Slow Dump data are accumulated, tracked and stored. The 2 Tesla Solenoid has eleven data points that need to be tracked and then stored when a fast dump or a slow dump occur. The TI555(Texas Instruments) PLC(Programmable Logic Controller) which controls the DC power circuit that powers the Solenoid, also has access to all the voltage taps and other equipment in the circuit. The TI555 constantly logs these eleven points in a rotating memory buffer. When either a fast dump(dump switch opens) ormore » a slow dump (power supply turns off) occurs, the TI555 organizes the respective data and will down load the data to a file on DO-CCRS2. This data in this file is moved over ethernet and is stored in a CSV (comma separated format) file which can easily be examined by Microsoft Excel or any other spreadsheet. The 2 Tesla solenoid control system also locks in first fault information. The TI555 decodes the first fault and passes it along to the program collecting the data and storing it on DO-CCRS2. This first fault information is then part of the file.« less

Archive of digital chirp subbottom profile data collected during USGS Cruise 13CCT04 offshore of Petit Bois Island, Mississippi, August 2013

USGS Publications Warehouse

Forde, Arnell S.; Flocks, James G.; Kindinger, Jack G.; Bernier, Julie C.; Kelso, Kyle W.; Wiese, Dana S.

2015-01-01

From August 13-23, 2013, the U.S. Geological Survey (USGS), in cooperation with the U.S. Army Corps of Engineers (USACE) conducted geophysical surveys to investigate the geologic controls on barrier island framework and long-term sediment transport offshore of Petit Bois Island, Mississippi. This investigation is part of a broader USGS study on Coastal Change and Transport (CCT). These surveys were funded through the Mississippi Coastal Improvements Program (MsCIP) with partial funding provided by the Northern Gulf of Mexico Ecosystem Change and Hazard Susceptibility Project. This report serves as an archive of unprocessed digital chirp subbottom data, trackline maps, navigation files, Geographic Information System (GIS) files, Field Activity Collection System (FACS) logs, and formal Federal Geographic Data Committee (FGDC) metadata. Gained-showing a relative increase in signal amplitude-digital images of the seismic profiles are provided.

A Pipeline Tool for CCD Image Processing

NASA Astrophysics Data System (ADS)

Bell, Jon F.; Young, Peter J.; Roberts, William H.; Sebo, Kim M.

MSSSO is part of a collaboration developing a wide field imaging CCD mosaic (WFI). As part of this project, we have developed a GUI based pipeline tool that is an integrated part of MSSSO's CICADA data acquisition environment and processes CCD FITS images as they are acquired. The tool is also designed to run as a stand alone program to process previously acquired data. IRAF tasks are used as the central engine, including the new NOAO mscred package for processing multi-extension FITS files. The STScI OPUS pipeline environment may be used to manage data and process scheduling. The Motif GUI was developed using SUN Visual Workshop. C++ classes were written to facilitate launching of IRAF and OPUS tasks. While this first version implements calibration processing up to and including flat field corrections, there is scope to extend it to other processing.

17 CFR 232.10 - Application of part 232.

Code of Federal Regulations, 2010 CFR

2010-04-01

... uniform application form for access codes to file on EDGAR, and (2) File, by uploading as a Portable... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Application of part 232. 232...-T-GENERAL RULES AND REGULATIONS FOR ELECTRONIC FILINGS General § 232.10 Application of part 232. (a...

12 CFR Appendix B to Part 360 - Debit/Credit File Structure

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Debit/Credit File Structure B Appendix B to Part 360 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY RESOLUTION AND RECEIVERSHIP RULES Pt. 360, App. B Appendix B to Part 360—Debit/Credit File...

CAPRI: Using a Geometric Foundation for Computational Analysis and Design

NASA Technical Reports Server (NTRS)

Haimes, Robert

2002-01-01

CAPRI (Computational Analysis Programming Interface) is a software development tool intended to make computerized design, simulation and analysis faster and more efficient. The computational steps traditionally taken for most engineering analysis (Computational Fluid Dynamics (CFD), structural analysis, etc.) are: Surface Generation, usually by employing a Computer Aided Design (CAD) system; Grid Generation, preparing the volume for the simulation; Flow Solver, producing the results at the specified operational point; Post-processing Visualization, interactively attempting to understand the results. It should be noted that the structures problem is more tractable than CFD; there are fewer mesh topologies used and the grids are not as fine (this problem space does not have the length scaling issues of fluids). For CFD, these steps have worked well in the past for simple steady-state simulations at the expense of much user interaction. The data was transmitted between phases via files. In most cases, the output from a CAD system could go IGES files. The output from Grid Generators and Solvers do not really have standards though there are a couple of file formats that can be used for a subset of the gridding (i.e. PLOT3D) data formats and the upcoming CGNS). The user would have to patch up the data or translate from one format to another to move to the next step. Sometimes this could take days. Instead of the serial approach to analysis, CAPRI takes a geometry centric approach. CAPRI is a software building tool-kit that refers to two ideas: (1) A simplified, object-oriented, hierarchical view of a solid part integrating both geometry and topology definitions, and (2) programming access to this part or assembly and any attached data. The connection to the geometry is made through an Application Programming Interface (API) and not a file system.

75 FR 57756 - Combined Notice of Filings # 1

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-22

... Letter Agreement with NextEra Energy Resources, LLC for Engineering Study, to be effective 9/8/2010... tariff filing per 35.13(a)(2)(iii): AIC MBR and Short-Term Protocol to be effective 12/31/1998. Filed... at http://www.ferc.gov . To facilitate electronic service, persons with Internet access who will e...

PATSTAGS: PATRAN-To-STAGSC-1 Translator

NASA Technical Reports Server (NTRS)

Otte, Neil

1993-01-01

PATSTAGS computer program translates data from PATRAN finite-element mathematical model into STAGS input records used for engineering analysis. Reads data from PATRAN neutral file and writes STAGS input records into STAGS input file and UPRESS data file. Supports translations of nodal constraints, and of nodal, element, force, and pressure data. Written in FORTRAN 77.

Shuttle Systems 3-D Applications: Application of 3-D Graphics in Engineering Training for Shuttle Ground Processing

NASA Technical Reports Server (NTRS)

Godfrey, Gary S.

2003-01-01

This project illustrates an animation of the orbiter mate to the external tank, an animation of the OMS POD installation to the orbiter, and a simulation of the landing gear mechanism at the Kennedy Space Center. A detailed storyboard was created to reflect each animation or simulation. Solid models were collected and translated into Pro/Engineer's prt and asm formats. These solid models included computer files of the: orbiter, external tank, solid rocket booster, mobile launch platform, transporter, vehicle assembly building, OMS POD fixture, and landing gear. A depository of the above solid models was established. These solid models were translated into several formats. This depository contained the following files: stl for sterolithography, stp for neutral file work, shrinkwrap for compression, tiff for photoshop work, jpeg for Internet use, and prt and asm for Pro/Engineer use. Solid models were created of the material handling sling, bay 3 platforms, and orbiter contact points. Animations were developed using mechanisms to reflect each storyboard. Every effort was made to build all models technically correct for engineering use. The result was an animated routine that could be used by NASA for training material handlers and uncovering engineering safety issues.

12 CFR Appendix E to Part 360 - Hold File Structure

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Hold File Structure E Appendix E to Part 360 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY RESOLUTION AND RECEIVERSHIP RULES Pt. 360, App. E Appendix E to Part 360—Hold File Structure This is the...

15 CFR Appendix D to Part 30 - AES Filing Citation, Exemption and Exclusion Legends

Code of Federal Regulations, 2010 CFR

2010-01-01

... Exclusion Legends D Appendix D to Part 30 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade BUREAU OF THE CENSUS, DEPARTMENT OF COMMERCE FOREIGN TRADE REGULATIONS Pt. 30, App. D Appendix D to Part 30—AES Filing Citation, Exemption and Exclusion Legends I. USML Proof of Filing Citation...

19 CFR Appendix D to Part 113 - Importer Security Filing Bond

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Importer Security Filing Bond D Appendix D to Part 113 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CUSTOMS BONDS Pt. 113, App. D Appendix D to Part 113—Importer Security Filing Bond This...

ChemEngine: harvesting 3D chemical structures of supplementary data from PDF files.

PubMed

Karthikeyan, Muthukumarasamy; Vyas, Renu

2016-01-01

Digital access to chemical journals resulted in a vast array of molecular information that is now available in the supplementary material files in PDF format. However, extracting this molecular information, generally from a PDF document format is a daunting task. Here we present an approach to harvest 3D molecular data from the supporting information of scientific research articles that are normally available from publisher's resources. In order to demonstrate the feasibility of extracting truly computable molecules from PDF file formats in a fast and efficient manner, we have developed a Java based application, namely ChemEngine. This program recognizes textual patterns from the supplementary data and generates standard molecular structure data (bond matrix, atomic coordinates) that can be subjected to a multitude of computational processes automatically. The methodology has been demonstrated via several case studies on different formats of coordinates data stored in supplementary information files, wherein ChemEngine selectively harvested the atomic coordinates and interpreted them as molecules with high accuracy. The reusability of extracted molecular coordinate data was demonstrated by computing Single Point Energies that were in close agreement with the original computed data provided with the articles. It is envisaged that the methodology will enable large scale conversion of molecular information from supplementary files available in the PDF format into a collection of ready- to- compute molecular data to create an automated workflow for advanced computational processes. Software along with source codes and instructions available at https://sourceforge.net/projects/chemengine/files/?source=navbar.Graphical abstract.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

AFP no. 28 (General Electric Lynn Manufacturing dept). is located in the City of Everett, Mass. The facility is composed of 10 buildings having 344,342 square feet of floor space on a 43-acre tract. The plant is engaged in the manufacture of large jet engine components and sub-assemblies. AFT 29 (General Electric River Works Facility) is located in the City of Lynn, Mass. AFT No. 29 is part of the General Electric Aircraft Engine Business Group and the facilities are used for testing and assembly of jet engines. The following conclusions have been developed based on the results of themore » project team's field inspection, review of plant records and files, and interviews with plant personnel. Each of the sites listed below was ranked using the HARM system and was determined to have a sufficient potential for environmental contamination to warrant some degree of follow-on investigation. AFB no. 28: Waste sump and chip storage area; and AFT no. 29: Underground fuel line leaks and underground fuel storage tank leak.« less

9. Historic construction view of Building 100. 1956. On file ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. Historic construction view of Building 100. 1956. On file at NASA Plumbrook Research Facility, Sandusky, Ohio. - Rocket Engine Testing Facility, GRC Building No. 100, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

16. View of Building 100 control room. 1987. On file ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

16. View of Building 100 control room. 1987. On file at NASA Glenn Research Center, Cleveland, Ohio. - Rocket Engine Testing Facility, GRC Building No. 100, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

The effects of cyclical axial motion on rotary endodontic instrument fatigue.

PubMed

Dederich, D N; Zakariasen, K L

1986-02-01

A potential problem with the use of rotary engine-driven files to flare canals is metal fatigue and subsequent breakage. This study analyzes the effects of cyclical axial motion on instrument failure by fatigue testing of endodontic files with and without cyclical axial motion. Eighteen new instruments, sizes 15 to 45, were mounted in a lathe and turned at 1650 rpm in the lubricated lumen of a curved Pyrex capillary tube until failure occurred. Nine instruments of each size were turned with cyclical axial motion and nine were turned without it. The results indicated that cyclical axial motion can significantly extend the life span of rotary engine files. Torsional forces were not considered in this study.

Real-Time Closed Loop Modulated Turbine Cooling

NASA Technical Reports Server (NTRS)

Shyam, Vikram; Culley, Dennis E.; Eldridge, Jeffrey; Jones, Scott; Woike, Mark; Cuy, Michael

2014-01-01

It has been noted by industry that in addition to dramatic variations of temperature over a given blade surface, blade-to-blade variations also exist despite identical design. These variations result from manufacturing variations, uneven wear and deposition over the life of the part as well as limitations in the uniformity of coolant distribution in the baseline cooling design. It is proposed to combine recent advances in optical sensing, actuation, and film cooling concepts to develop a workable active, closed-loop modulated turbine cooling system to improve by 10 to 20 the turbine thermal state over the flight mission, to improve engine life and to dramatically reduce turbine cooling air usage and aircraft fuel burn. A reduction in oxides of nitrogen (NOx) can also be achieved by using the excess coolant to improve mixing in the combustor especially for rotorcraft engines. Recent patents filed by industry and universities relate to modulating endwall cooling using valves. These schemes are complex, add weight and are limited to the endwalls. The novelty of the proposed approach is twofold 1) Fluidic diverters that have no moving parts are used to modulate cooling and can operate under a wide range of conditions and environments. 2) Real-time optical sensing to map the thermal state of the turbine has never been attempted in realistic engine conditions.

17 CFR 405.2 - Reports to be made by registered government securities brokers and dealers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... government securities broker or dealer shall file Part I of Form BD-Y2K (§ 249.618 of this title) prepared as..., shall file Part II of Form BD-Y2K (§ 249.618 of this title). Part II of Form BD-Y2K shall address each... registered government securities broker or dealer that was not required to file Part II of Form BD-Y2K under...

20 CFR 30.102 - In general, how does an employee file a claim for additional impairment or wage-loss under Part E...

Code of Federal Regulations, 2010 CFR

2010-04-01

... for additional impairment or wage-loss under Part E of EEOICPA? 30.102 Section 30.102 Employees... an employee file a claim for additional impairment or wage-loss under Part E of EEOICPA? (a) An employee previously awarded impairment benefits by OWCP may file a claim for additional impairment benefits...

31 CFR 1.36 - Systems exempt in whole or in part from provisions of 5 U.S.C. 552a and this part.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., Courtesy Investigations. IRS 26.008 IRS and Treasury Employee Delinquency. IRS 26.011 Litigation Case Files... Delinquency Investigations) Files. IRS 26.021 Transferee Files. IRS 26.022 Delinquency Prevention Programs...

33 CFR 211.19 - Place of filing claims.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Section 211.19 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE REAL ESTATE ACTIVITIES OF THE CORPS OF ENGINEERS IN CONNECTION WITH CIVIL WORKS PROJECTS Real... States Division Engineer in whose jurisdiction the claim arises. ...

7. Historic aerial photo of rocket engine test facility complex, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. Historic aerial photo of rocket engine test facility complex, June 1962. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA GRC photo number C-60674. - Rocket Engine Testing Facility, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

78 FR 11129 - Office of Engineering and Technology Seeks Comment on Updated OET-69 Software

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-15

... cell level, and also speeds calculations since the study grid only needs to be established one time... who choose to file by paper must file an original and one copy of each filing. If more than one docket... interface (implemented in Java), used to establish the parameters of the study and which draws data from...

77 FR 63812 - FFP Missouri 5, LLC; FFP Missouri 6, LLC; Notice of Intent To File License Application, Filing of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-17

... Flow Power Corporation on behalf of its subsidiary limited liability corporations (listed above and collectively referred to below as ``Free Flow Power''). e. Name of Projects: Emsworth Lock and Dam... United States lands administered by the U.S. Army Corps of Engineers. g. Filed Pursuant to: 18 CFR 5.3 of...

Publications - RI 2001-1D | Alaska Division of Geological & Geophysical

Science.gov Websites

-geologic map of the Chulitna region, southcentral Alaska, scale 1:63,360 (16.0 M) Digital Geospatial Data Digital Geospatial Data Chulitna region engineering geology Data File Format File Size Info Download

Apical extrusion of debris and irrigants using two hand and three engine-driven instrumentation techniques.

PubMed

Ferraz, C C; Gomes, N V; Gomes, B P; Zaia, A A; Teixeira, F B; Souza-Filho, F J

2001-07-01

To evaluate the weight of debris and irrigant volume extruded apically from extracted teeth in vitro after endodontic instrumentation using the balanced force technique, a hybrid hand instrumentation technique, and three engine-driven techniques utilizing nickel-titanium instruments (ProFile .04, Quantec 2000 and Pow-R). Five groups of 20 extracted human teeth with single canals were instrumented using one or other of five techniques: balanced force, hybrid, Quantec 2000, ProFile .04, or Pow-R. Debris extruded from the apical foramen during instrumentation were collected into preweighed 1.5 mL tubes. Following instrumentation, the volume of extruded irrigant fluid was determined by visual comparison to control centrifuge tubes filled with 0.25 mL increments of distilled water. The weight of dry extruded dentine debris was also established. Overall, the engine-driven techniques extruded less debris than the manual ones. However, there was no statistical difference between the balanced force technique and the engine-driven methods. The volume of irrigant extruded through the apex was directly associated with the weight of extruded debris, except within the ProFile group. The hybrid technique was associated with the greatest extrusion of both debris and irrigant. Overall, the engine-driven nickel-titanium systems were associated with less apical extrusion.

12. Historic plot plan and drawings index for rocket engine ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. Historic plot plan and drawings index for rocket engine test facility, June 28, 1956. NASA GRC drawing number CE-101810. On file at NASA Glenn Research Center. - Rocket Engine Testing Facility, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

9. Historic aerial photo of rocket engine test facility complex, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. Historic aerial photo of rocket engine test facility complex, June 11, 1965. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA GRC photo number C-65-1270. - Rocket Engine Testing Facility, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

10. Historic photo of rendering of rocket engine test facility ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. Historic photo of rendering of rocket engine test facility complex, April 28, 1964. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA GRC photo number C-69472. - Rocket Engine Testing Facility, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

5. Historic photo of scale model of rocket engine test ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Historic photo of scale model of rocket engine test facility, June 18, 1957. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA GRC photo number C-45264. - Rocket Engine Testing Facility, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

8. Historic aerial photo of rocket engine test facility complex, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. Historic aerial photo of rocket engine test facility complex, June 11, 1965. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA GRC photo number C-65-1271. - Rocket Engine Testing Facility, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

Performance Analysis of the Unitree Central File

NASA Technical Reports Server (NTRS)

Pentakalos, Odysseas I.; Flater, David

1994-01-01

This report consists of two parts. The first part briefly comments on the documentation status of two major systems at NASA#s Center for Computational Sciences, specifically the Cray C98 and the Convex C3830. The second part describes the work done on improving the performance of file transfers between the Unitree Mass Storage System running on the Convex file server and the users workstations distributed over a large georgraphic area.

Baseline Fuel Economy and Emissions Tests of a Chrysler 1978, 225 CID Engine

DOT National Transportation Integrated Search

1980-09-01

This document reports on baseline engine tests of a Chrysler 1978, 225 CID, six-cylinder engine. The tests were conducted in the Automotive Research Laboratory at the Transportation Systems Center. Test results presented herein are also filed on comp...

11. Historic photo of cutaway rendering of rocket engine test ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. Historic photo of cutaway rendering of rocket engine test facility complex, June 11, 1965. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA GRC photo number C-74433. - Rocket Engine Testing Facility, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

The computerized OMAHA system in microsoft office excel.

PubMed

Lai, Xiaobin; Wong, Frances K Y; Zhang, Peiqiang; Leung, Carenx W Y; Lee, Lai H; Wong, Jessica S Y; Lo, Yim F; Ching, Shirley S Y

2014-01-01

The OMAHA System was adopted as the documentation system in an interventional study. To systematically record client care and facilitate data analysis, two Office Excel files were developed. The first Excel file (File A) was designed to record problems, care procedure, and outcomes for individual clients according to the OMAHA System. It was used by the intervention nurses in the study. The second Excel file (File B) was the summary of all clients that had been automatically extracted from File A. Data in File B can be analyzed directly in Excel or imported in PASW for further analysis. Both files have four parts to record basic information and the three parts of the OMAHA System. The computerized OMAHA System simplified the documentation procedure and facilitated the management and analysis of data.

17 CFR 240.17a-5 - Reports to be made by certain brokers and dealers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... or carries customer accounts shall file Part I of Form X-17A-5 (§ 249.617 of this chapter) within 10... clears transactions or carries customer accounts shall file Part II of Form X-17A-5 (§ 249.617 of this... accounts shall file Part IIA of Form X-17A-5 (§ 249.617 of this chapter) within 17 business days after the...

User`s and reference guide to the INEL RML/analytical radiochemistry sample tracking database version 1.00

DOE Office of Scientific and Technical Information (OSTI.GOV)

Femec, D.A.

This report discusses the sample tracking database in use at the Idaho National Engineering Laboratory (INEL) by the Radiation Measurements Laboratory (RML) and Analytical Radiochemistry. The database was designed in-house to meet the specific needs of the RML and Analytical Radiochemistry. The report consists of two parts, a user`s guide and a reference guide. The user`s guide presents some of the fundamentals needed by anyone who will be using the database via its user interface. The reference guide describes the design of both the database and the user interface. Briefly mentioned in the reference guide are the code-generating tools, CREATE-SCHEMAmore » and BUILD-SCREEN, written to automatically generate code for the database and its user interface. The appendices contain the input files used by the these tools to create code for the sample tracking database. The output files generated by these tools are also included in the appendices.« less

Tools to Ease Your Internet Adventures: Part I.

ERIC Educational Resources Information Center

Descy, Don E.

1993-01-01

This first of a two-part series highlights three tools that improve accessibility to Internet resources: (1) Alex, a database that accesses files in FTP (file transfer protocol) sites; (2) Archie, software that searches for file names with a user's search term; and (3) Gopher, a menu-driven program to access Internet sites. (LRW)

Performance Evaluation of Various STL File Mesh Refining Algorithms Applied for FDM-RP Process

NASA Astrophysics Data System (ADS)

Ledalla, Siva Rama Krishna; Tirupathi, Balaji; Sriram, Venkatesh

2018-06-01

Layered manufacturing machines use the stereolithography (STL) file to build parts. When a curved surface is converted from a computer aided design (CAD) file to STL, it results in a geometrical distortion and chordal error. Parts manufactured with this file, might not satisfy geometric dimensioning and tolerance requirements due to approximated geometry. Current algorithms built in CAD packages have export options to globally reduce this distortion, which leads to an increase in the file size and pre-processing time. In this work, different mesh subdivision algorithms are applied on STL file of a complex geometric features using MeshLab software. The mesh subdivision algorithms considered in this work are modified butterfly subdivision technique, loops sub division technique and general triangular midpoint sub division technique. A comparative study is made with respect to volume and the build time using the above techniques. It is found that triangular midpoint sub division algorithm is more suitable for the geometry under consideration. Only the wheel cap part is then manufactured on Stratasys MOJO FDM machine. The surface roughness of the part is measured on Talysurf surface roughness tester.

The geochemical landscape of northwestern Wisconsin and adjacent parts of northern Michigan and Minnesota (geochemical data files)

USGS Publications Warehouse

Cannon, William F.; Woodruff, Laurel G.

2003-01-01

This data set consists of nine files of geochemical information on various types of surficial deposits in northwestern Wisconsin and immediately adjacent parts of Michigan and Minnesota. The files are presented in two formats: as dbase files in dbaseIV form and Microsoft Excel form. The data present multi-element chemical analyses of soils, stream sediments, and lake sediments. Latitude and longitude values are provided in each file so that the dbf files can be readily imported to GIS applications. Metadata files are provided in outline form, question and answer form and text form. The metadata includes information on procedures for sample collection, sample preparation, and chemical analyses including sensitivity and precision.

77 FR 3666 - Changes To Implement the Supplemental Examination Provisions of the Leahy-Smith America Invents...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-25

...., ex parte or inter partes reexamination, reissue, supplemental examination, post-grant review, or... proposing to adjust the fee for filing a request for ex parte reexamination and to set a fee for petitions filed in ex parte and inter partes reexamination proceedings to more accurately reflect the cost of...

75 FR 354 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-05

..., 2009. Take notice that the Commission received the following electric rate filings: Docket Numbers...: Iberdrola Renewables, Inc et al. submit Original Sheet 1 to FERC Electric Tariff, Third Revised Volume 1... Maine Power Company. Description: Central Maine Power Company submits executed Engineering and...

77 FR 76476 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-28

.... Applicants: Sierra Pacific Power Company. Description: Rate Schedule No. 64. Engineering Procurement... that the Commission received the following electric rate filings: Docket Numbers: ER13-251-001... Numbers: ER13-428-001. Applicants: Pennsylvania Electric Company, PJM Interconnection, L.L.C. Description...

22. Construction view of Building 202, 1956. On file at ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. Construction view of Building 202, 1956. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA GRC photo number C-171D-1956. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

FAQ's | College of Engineering & Applied Science

Science.gov Websites

zipped (compressed) format. This will help when the file is very large or created by one of the high end Milwaukee Engineer People Faculty and Staff Biomedical Engineering Civil & Environmental Engineering Computer Labs Technical Questions The labs are generally open 24/7, how will I know when a lab/system

6. Historic photo of rocket engine test facility Building 202 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. Historic photo of rocket engine test facility Building 202 complex in operation at night, September 12, 1957. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA GRC photo number C-45924. - Rocket Engine Testing Facility, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

14. Historic view of engineer in Building 100 control room ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. Historic view of engineer in Building 100 control room examining data printout. 1957. On file at NASA Plumbrook Research Facility, Sandusky, Ohio. NASA photo number C-46210. - Rocket Engine Testing Facility, GRC Building No. 100, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

13. Historic drawing of rocket engine test facility layout, including ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. Historic drawing of rocket engine test facility layout, including Buildings 202, 205, 206, and 206A, February 3, 1984. NASA GRC drawing number CF-101539. On file at NASA Glenn Research Center. - Rocket Engine Testing Facility, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

An expert system shell for inferring vegetation characteristics: Changes to the historical cover type database (Task F)

NASA Technical Reports Server (NTRS)

1993-01-01

All the options in the NASA VEGetation Workbench (VEG) make use of a database of historical cover types. This database contains results from experiments by scientists on a wide variety of different cover types. The learning system uses the database to provide positive and negative training examples of classes that enable it to learn distinguishing features between classes of vegetation. All the other VEG options use the database to estimate the error bounds involved in the results obtained when various analysis techniques are applied to the sample of cover type data that is being studied. In the previous version of VEG, the historical cover type database was stored as part of the VEG knowledge base. This database was removed from the knowledge base. It is now stored as a series of flat files that are external to VEG. An interface between VEG and these files was provided. The interface allows the user to select which files of historical data to use. The files are then read, and the data are stored in Knowledge Engineering Environment (KEE) units using the same organization of units as in the previous version of VEG. The interface also allows the user to delete some or all of the historical database units from VEG and load new historical data from a file. This report summarizes the use of the historical cover type database in VEG. It then describes the new interface to the files containing the historical data. It describes minor changes that were made to VEG to enable the externally stored database to be used. Test runs to test the operation of the new interface and also to test the operation of VEG using historical data loaded from external files are described. Task F was completed. A Sun cartridge tape containing the KEE and Common Lisp code for the new interface and the modified version of the VEG knowledge base was delivered to the NASA GSFC technical representative.

Comparison of working length control consistency between hand K-files and Mtwo NiTi rotary system.

PubMed

Krajczár, Károly; Varga, Enikő; Marada, Gyula; Jeges, Sára; Tóth, Vilmos

2016-04-01

The purpose of this study was to investigate the consistency of working length control between hand instrumentation in comparison to engine driven Mtwo nickel-titanium rotary files. Forty extracted maxillary molars were selected and divided onto two parallel groups. The working lengths of the mesiobuccal root canals were estimated. The teeth were fixed in a phantom head. The root canal preparation was carried out group 1 (n=20) with hand K-files, (VDW, Munich, Germany) and group 2 (n=20) with Mtwo instruments (VDW, Munich, Germany). Vestibulo-oral and mesio-distal directional x-ray images were taken before the preparation with #10 K-file, inserted into the mesiobuccal root canal to the working length, and after preparation with #25, #30 and #40 files. Working lenght changes were detected with measurements between the radiological apex and the instrument tips. In the Mtwo group a difference in the working competency (p<0.05) could be noticed only in the vestibulo-oral direction from #10 to #40 file. The hand instrument group showed a significant difference in working length competency for each larger file size (p<0.05) (ANOVA). Regression analysis in the hand instrumentation group indicated a working length decrease with a mean of 0,2 mm after each consecutive file size (p<0.01). The outcome of our trial indicated a high consistency in working length control for root canal preparation under simulated clinical condition using Mtwo rotary files. Mtwo NiTi rotary file did therefore proved to be more accurate in comparison to the conventional hand instrumentation. Working length, Mtwo, nickel-titanium, hand preparation, engine driven preparation.

Comparison of working length control consistency between hand K-files and Mtwo NiTi rotary system

PubMed Central

Krajczár, Károly; Varga, Enikő; Jeges, Sára; Tóth, Vilmos

2016-01-01

Background The purpose of this study was to investigate the consistency of working length control between hand instrumentation in comparison to engine driven Mtwo nickel-titanium rotary files. Material and Methods Forty extracted maxillary molars were selected and divided onto two parallel groups. The working lengths of the mesiobuccal root canals were estimated. The teeth were fixed in a phantom head. The root canal preparation was carried out group 1 (n=20) with hand K-files, (VDW, Munich, Germany) and group 2 (n=20) with Mtwo instruments (VDW, Munich, Germany). Vestibulo-oral and mesio-distal directional x-ray images were taken before the preparation with #10 K-file, inserted into the mesiobuccal root canal to the working length, and after preparation with #25, #30 and #40 files. Working lenght changes were detected with measurements between the radiological apex and the instrument tips. Results In the Mtwo group a difference in the working competency (p<0.05) could be noticed only in the vestibulo-oral direction from #10 to #40 file. The hand instrument group showed a significant difference in working length competency for each larger file size (p<0.05) (ANOVA). Regression analysis in the hand instrumentation group indicated a working length decrease with a mean of 0,2 mm after each consecutive file size (p<0.01). Conclusions The outcome of our trial indicated a high consistency in working length control for root canal preparation under simulated clinical condition using Mtwo rotary files. Mtwo NiTi rotary file did therefore proved to be more accurate in comparison to the conventional hand instrumentation. Key words:Working length, Mtwo, nickel-titanium, hand preparation, engine driven preparation. PMID:27034752

Sandia Engineering Analysis Code Access System v. 2.0.1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sjaardema, Gregory D.

The Sandia Engineering Analysis Code Access System (SEACAS) is a suite of preprocessing, post processing, translation, visualization, and utility applications supporting finite element analysis software using the Exodus database file format.

Highway Safety Information System guidebook for the California state data files. Volume I : SAS file formats

DOT National Transportation Integrated Search

1996-06-01

This manual has been developed to provide information and guidance to engineering staffs involved with project develop and design of highways. It identifies those standards, specifications, guides, and references approved for use in carrying out the ...

47 CFR 5.55 - Filing of applications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the Office of Engineering and Technology Web site https://gullfoss2.fcc.gov/prod/oet/cf/els/index.cfm... Office of Engineering and Technology Web site https://gullfoss2.fcc.gov/prod/oet/cf/els/index.cfm... instead be submitted to the Commission's Office of Engineering and Technology, Washington, DC 20554...

47 CFR 5.55 - Filing of applications.

Code of Federal Regulations, 2011 CFR

2011-10-01

... the Office of Engineering and Technology Web site https://gullfoss2.fcc.gov/prod/oet/cf/els/index.cfm... Office of Engineering and Technology Web site https://gullfoss2.fcc.gov/prod/oet/cf/els/index.cfm... instead be submitted to the Commission's Office of Engineering and Technology, Washington, DC 20554...

33 CFR 211.106 - Filing of objection by abutting owner.

Code of Federal Regulations, 2010 CFR

2010-07-01

... owner. 211.106 Section 211.106 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE REAL ESTATE ACTIVITIES OF THE CORPS OF ENGINEERS IN CONNECTION WITH CIVIL... the appropriate District Engineer. Such objection shall be in writing, dated and signed by the...

15. Historic view of engineer in Building 100 control room ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. Historic view of engineer in Building 100 control room examining data printout. August 28, 1962. On file at NASA Plumbrook Research Facility, Sandusky, Ohio. NASA photo number C-61500. - Rocket Engine Testing Facility, GRC Building No. 100, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

47 CFR 5.55 - Filing of applications.

Code of Federal Regulations, 2012 CFR

2012-10-01

... the Office of Engineering and Technology Web site https://gullfoss2.fcc.gov/prod/oet/cf/els/index.cfm... Office of Engineering and Technology Web site https://gullfoss2.fcc.gov/prod/oet/cf/els/index.cfm... instead be submitted to the Commission's Office of Engineering and Technology, Washington, DC 20554...

77 FR 41197 - Notice of Proposed Information Collection: Comment Request; Legal Instructions Concerning...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-12

... Part B, item 2. Part B, item 8--changed references to the ``Uniform Commercial Code'' to ``UCC'' since...'' for clarity. Under ``Lapsed UCC filings'', removed ``as applicable'' at the end of the first paragraph. Under ``UCC filing was never filed'', the following sentence was added at the end of the first paragraph...

76 FR 76710 - Merritt, Beck C.; Notice of Filing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-08

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ID-6730-000] Merritt, Beck C.; Notice of Filing Take notice that on December 1, 2011, Beck C. Merritt submitted for filing, an..., 16 U.S.C. 825d (b) and Part 45 of Title 18 of the Code of Federal Regulations, 18 CFR part 45. Any...

IEEE (Institute of Electrical and Electronics Engineers) International Pulsed Power Conference on (2nd) Held in Lubbock, Texas on 12-14 June 1979 (Digest of Technical Papers)

DTIC Science & Technology

1980-02-01

PHOTOGRAPH THIS SHEET 0 FILE P.IwLEVEL IVETRY U- AFP65,f-7YA ga- - II IDS DTIBUTION T ATEMNT A App.-ove~d for public release; Di.-tribuilon Unlinitod... PHOTOGRAPH THIS SHEET AND RETURN TO DTIC-FDAC DTIC FORM 70A DOCUMENT PROCESSING SHEET PREVIOUS EDITION MAY BE USED UNTIL MAR 86 STOCK IS EXHAUSTED. IEEE 2rd...Kolm devel- transfers momencum from a massive ch..ically diven oped the "mass driver" as part of two NASA -AMES sum- armacure to a much lighter, hi h r

Isostatic gravity map and principal facts for 694 gravity stations in Yellowstone National Park and vicinity, Wyoming, Montana, and Idaho

USGS Publications Warehouse

Carle, S.F.; Glen, J.M.; Langenheim, V.E.; Smith, R.B.; Oliver, H.W.

1990-01-01

The report presents the principal facts for gravity stations compiled for Yellowstone National Park and vicinity. The gravity data were compiled from three sources: Defense Mapping Agency, University of Utah, and U.S. Geological Survey. Part A of the report is a paper copy describing how the compilation was done and presenting the data in tabular format as well as a map; part B is a 5-1/4 inch floppy diskette containing only the data files in ASCII format. Requirements for part B: IBM PC or compatible, DOS v. 2.0 or higher. Files contained on this diskette: DOD.ISO -- File containing the principal facts of the 514 gravity stations obtained from the Defense Mapping Agency. The data are in Plouff format* (see file PFTAB.TEX). UTAH.ISO -- File containing the principal facts of 153 gravity stations obtained from the University of Utah. Data are in Plouff format. USGS.ISO -- File containing the principal facts of 27 gravity stations collected by the U.S. Geological Survey in July 1987. Data are in Plouff format. PFTAB.TXT -- File containing explanation of principal fact format. ACC.TXT -- File containing explanation of accuracy codes.

Quantification of Boat Visitation Rates at Artificial and Natural Reefs in the Eastern Gulf of Mexico Using Acoustic Recorders

PubMed Central

Simard, Peter; Wall, Kara R.; Mann, David A.; Wall, Carrie C.; Stallings, Christopher D.

2016-01-01

Artificial reefs are commonly used as a management tool, in part to provide ecosystem services, including opportunities for recreational fishing and diving. Quantifying the use of artificial reefs by recreational boaters is essential for determining their value as ecosystem services. In this study, four artificial–natural reef pairs in the eastern Gulf of Mexico (off western Florida) were investigated for boat visitation rates using autonomous acoustic recorders. Digital SpectroGram (DSG) recorders were used to collect sound files from April 2013 to March 2015. An automatic detection algorithm was used to identify boat noise in individual files using the harmonic peaks generated by boat engines, and by comparing the sound amplitude of each file with surrounding files. In all four pairs, visitation rates were significantly higher at the artificial reef than the natural reef. This increase in boat visitation was likely due to actual or perceived increased quality of fishing and diving at the artificial reefs, or to lack of knowledge of the presence or locations of the natural reefs. Inshore reefs (<15 m depth) had high variability in monthly visitation rates, which were generally highest in warmer months. However the seasonal signal was dampened on offshore reefs (>25 m depth). This study appears to be the first to use acoustic data to measure participant use of boating destinations, and highlights the utility of acoustic monitoring for the valuation of this important ecosystem service provided by artificial reefs. PMID:27500533

Quantification of Boat Visitation Rates at Artificial and Natural Reefs in the Eastern Gulf of Mexico Using Acoustic Recorders.

PubMed

Simard, Peter; Wall, Kara R; Mann, David A; Wall, Carrie C; Stallings, Christopher D

2016-01-01

Artificial reefs are commonly used as a management tool, in part to provide ecosystem services, including opportunities for recreational fishing and diving. Quantifying the use of artificial reefs by recreational boaters is essential for determining their value as ecosystem services. In this study, four artificial-natural reef pairs in the eastern Gulf of Mexico (off western Florida) were investigated for boat visitation rates using autonomous acoustic recorders. Digital SpectroGram (DSG) recorders were used to collect sound files from April 2013 to March 2015. An automatic detection algorithm was used to identify boat noise in individual files using the harmonic peaks generated by boat engines, and by comparing the sound amplitude of each file with surrounding files. In all four pairs, visitation rates were significantly higher at the artificial reef than the natural reef. This increase in boat visitation was likely due to actual or perceived increased quality of fishing and diving at the artificial reefs, or to lack of knowledge of the presence or locations of the natural reefs. Inshore reefs (<15 m depth) had high variability in monthly visitation rates, which were generally highest in warmer months. However the seasonal signal was dampened on offshore reefs (>25 m depth). This study appears to be the first to use acoustic data to measure participant use of boating destinations, and highlights the utility of acoustic monitoring for the valuation of this important ecosystem service provided by artificial reefs.

Technology Transfer of the Air Quality Assessment Model.

DTIC Science & Technology

1984-02-01

i T I, _______ ENGINEERING & SERVICES LABORATORY AIR FORCE ENGINEERING & SERVICES CENTER TYNOALL AIR FORCE BASE. FLORIDA 32403 OTIC FILE CO84 03...30 015 NOTICE PLEASE DO NOT REQUEST COPIES OF THIS REPORT FRO(M HQ AFESC./RD ( ENGINEERING AND SERVICES LABORATORY). ADDITONAL COPIES MAY BE PURCHASED...report was prepared by the Air Force Engineering and Services Center, Engineering and Services Laboratory, (AFESC/ RDV) Tyndall AFB, FL. This report

10 CFR 2.302 - Filing of documents.

Code of Federal Regulations, 2010 CFR

2010-01-01

... this part shall be electronically transmitted through the E-Filing system, unless the Commission or... all methods of filing have been completed. (e) For filings by electronic transmission, the filer must... digital ID certificates, the NRC permits participants in the proceeding to access the E-Filing system to...

75 FR 11528 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-11

...: Docket Numbers: ER10-689-001. Applicants: Virginia Electric and Power Company. Description: Dominion... Power Company submits its Engineering and procurement Agreement dated February 3, 2010 with Spruce Mt... interconnection service agreement with Virginia Electric Power Co. et al. Filed Date: 03/03/2010. Accession Number...

30 CFR 865.12 - Procedures for filing an application for review of discrimination.

Code of Federal Regulations, 2011 CFR

2011-07-01

... for filing an application for review of discrimination. (a) Who may file. Any employee, or any... violation of § 865.11(a) of this part may file an application for review. For the purpose of these... alleged discrimination. (b) Where to file. The employee or representative may file the application for...

30 CFR 865.12 - Procedures for filing an application for review of discrimination.

Code of Federal Regulations, 2010 CFR

2010-07-01

... for filing an application for review of discrimination. (a) Who may file. Any employee, or any... violation of § 865.11(a) of this part may file an application for review. For the purpose of these... alleged discrimination. (b) Where to file. The employee or representative may file the application for...

78 FR 72878 - Revisions to Procedural Regulations Governing Filing, Indexing and Service by Oil Pipelines...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-04

...-5-000] Revisions to Procedural Regulations Governing Filing, Indexing and Service by Oil Pipelines, Electronic Tariff Filings; Notice of Changes to eTariff Part 341 Type of Filing Codes Order No. 780... available eTariff Type of Filing Codes (TOFC) will be modified as follows: \\2\\ \\1\\ Filing, Indexing and...

49 CFR 31.26 - Filing, form, and service of papers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 1 2011-10-01 2011-10-01 false Filing, form, and service of papers. 31.26 Section... Filing, form, and service of papers. (a) Filing and form. (1) A party filing any document under this part... paper filed in the proceeding shall contain a caption setting forth the title of the action, the case...

77 FR 48827 - Changes To Implement the Supplemental Examination Provisions of the Leahy-Smith America Invents...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-14

... enforceability of the patent during litigation. The Office is also adjusting the fee for filing a request for ex parte reexamination and setting a fee for petitions filed in ex parte and inter partes reexamination... raises a substantial new question of patentability, the Office will order ex parte reexamination of the...

45 CFR 81.116 - Filing of ex parte communications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Filing of ex parte communications. 81.116 Section 81.116 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION PRACTICE AND... parte communications. A prohibited communication in writing received by the Secretary, the reviewing...

75 FR 76401 - Pilot Program for Extended Time Period To Reply to a Notice To File Missing Parts of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-08

... filing system, EFS-Web, and selecting the document description of ``Certification and Request for Missing... Filing System Web (EFS-Web), 74 FR 55200 (Oct. 27, 2009), 1348 Off. Gaz. Pat. Office 394 (Nov. 24, 2009... parts notice, including increased use of the eighteen-month publication system, more time for applicants...

Bin-Carver: Automatic Recovery of Binary Executable Files

DTIC Science & Technology

2012-05-01

PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Texas A&M University,Department of Computer Science and Engineering,College Station,TX,77840 8...PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR/MONITOR’S ACRONYM(S) 11. SPONSOR/MONITOR’S REPORT...least 23 4K data blocks) and observed how this binary file gets organized in a brand new disk. We found that this simple ls file actually gets

33 CFR 209.140 - Operations of the Corps of Engineers under the Federal Power Act.

Code of Federal Regulations, 2012 CFR

2012-07-01

... structures filed with the Federal Power Commission in connection with licensing of non-Federal hydroelectric... Engineers under the Federal Power Act. 209.140 Section 209.140 Navigation and Navigable Waters CORPS OF... the Corps of Engineers under the Federal Power Act. (a) General. This section outlines policies and...

33 CFR 209.140 - Operations of the Corps of Engineers under the Federal Power Act.

Code of Federal Regulations, 2014 CFR

2014-07-01

... structures filed with the Federal Power Commission in connection with licensing of non-Federal hydroelectric... Engineers under the Federal Power Act. 209.140 Section 209.140 Navigation and Navigable Waters CORPS OF... the Corps of Engineers under the Federal Power Act. (a) General. This section outlines policies and...

33 CFR 209.140 - Operations of the Corps of Engineers under the Federal Power Act.

Code of Federal Regulations, 2013 CFR

2013-07-01

... structures filed with the Federal Power Commission in connection with licensing of non-Federal hydroelectric... Engineers under the Federal Power Act. 209.140 Section 209.140 Navigation and Navigable Waters CORPS OF... the Corps of Engineers under the Federal Power Act. (a) General. This section outlines policies and...

36. Historic photo of Building 202 interior, shows shop area ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

36. Historic photo of Building 202 interior, shows shop area with engineers assembling twenty-thousand-pound-thrust rocket engine, December 15, 1958. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-49343. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

32. Historic view of Building 202 test stand A with ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

32. Historic view of Building 202 test stand A with rocket engine, close-up detail of engine, November 19, 1957. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-46492. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

29. Historic view of twentythousandpound rocket test stand with engine ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

29. Historic view of twenty-thousand-pound rocket test stand with engine installation in test cell of Building 202, September 1957. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA GRC photo number C-45870. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

49. Historic photo of Building 202 test cell interior, test ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

49. Historic photo of Building 202 test cell interior, test stand A with engineer examining damage to test engine, October 21, 1966. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-66-4064. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

40. Historic photo of Building 202 test cell interior, with ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

40. Historic photo of Building 202 test cell interior, with engineers working on rocket engine mounted on test stand A, June 26, 1959. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-51026. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

An analysis of the low-earth-orbit communications environment

NASA Astrophysics Data System (ADS)

Diersing, Robert Joseph

Advances in microprocessor technology and availability of launch opportunities have caused interest in low-earth-orbit satellite based communications systems to increase dramatically during the past several years. In this research the capabilities of two low-cost, store-and-forward LEO communications satellites operating in the public domain are examined--PACSAT-1 (operated by the Radio Amateur Satellite Corporation) and UoSAT-3 (operated by the University of Surrey, England, Electrical Engineering Department). The file broadcasting and file transfer facilities are examined in detail and a simulation model of the downlink traffic pattern is developed. The simulator will aid the assessment of changes in design and implementation for other systems. The development of the downlink traffic simulator is based on three major parts. First, is a characterization of the low-earth-orbit operating environment along with preliminary measurements of the PACSAT-1 and UoSAT-3 systems including: satellite visibility constraints on communications, monitoring equipment configuration, link margin computations, determination of block and bit error rates, and establishing typical data capture rates for ground stations using computer-pointed directional antennas and fixed omni-directional antennas. Second, arrival rates for successful and unsuccessful file server connections are established along with transaction service times. Downlink traffic has been further characterized by measuring: frame and byte counts for all data-link layer traffic; 30-second interval average response time for all traffic and for file server traffic only; file server response time on a per-connection basis; and retry rates for information and supervisory frames. Finally, the model is verified by comparison with measurements of actual traffic not previously used in the model building process. The simulator is then used to predict operation of the PACSAT-1 satellite with modifications to the original design.

Photographic copy of original drawing, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of original drawing, by Corps of Engineers, U.S. Army, May 1938 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 1, project location and index - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of original drawing, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of original drawing, by Corps of Engineers, U.S. Army, June 1939 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 3, lining details at Hinckston Run - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of original drawing, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of original drawing, by Corps of Engineers, U.S. Army, June 1939 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 3, general plan and earthwork distribution - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of original drawing, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of original drawing, by Corps of Engineers, U.S. Army, February 1939 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 2, general plan and earthwork distribution - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of original drawing, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of original drawing, by Corps of Engineers, U.S. Army, May 1938 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 1, general plan and earthwork distribution - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Software Engineering Laboratory (SEL) data base reporting software user's guide and system description. Volume 2: Program descriptions

NASA Technical Reports Server (NTRS)

1983-01-01

The structure and functions of each reporting software program for the Software Engineering Laboratory data base are described. Baseline diagrams, module descriptions, and listings of program generation files are included.

76 FR 80926 - Cortez Pumped Storage Project; Notice of Preliminary Permit Application Accepted for Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-27

..., Motions To Intervene, and Competing Applications On December 1, 2011, INCA Engineers, Inc., Washington...: Mr. Donald Thompson, INCA Engineers, Inc., 400, 112th Ave. NE., Suite 400, Bellevue, WA 98004; phone...

77 FR 16219 - Cortez Pumped Storage Project; Notice of Preliminary Permit Application Accepted for Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-20

..., Motions To Intervene, and Competing Applications On November 30, 2011, INCA Engineers, Inc., Washington...: Mr. Donald Thompson, INCA Engineers, Inc., 400 112th Ave. NE., Suite 400 Bellevue, WA 98004; phone...

46 CFR 530.5 - Duty to file.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 9 2010-10-01 2010-10-01 false Duty to file. 530.5 Section 530.5 Shipping FEDERAL... Provisions § 530.5 Duty to file. (a) The duty under this part to file service contracts, amendments and... conditions as the parties may agree. (c) Registration—(1) Application. Authority to file or delegate the...

46 CFR 530.5 - Duty to file.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 9 2011-10-01 2011-10-01 false Duty to file. 530.5 Section 530.5 Shipping FEDERAL... Provisions § 530.5 Duty to file. (a) The duty under this part to file service contracts, amendments and... conditions as the parties may agree. (c) Registration—(1) Application. Authority to file or delegate the...

GeNemo: a search engine for web-based functional genomic data.

PubMed

Zhang, Yongqing; Cao, Xiaoyi; Zhong, Sheng

2016-07-08

A set of new data types emerged from functional genomic assays, including ChIP-seq, DNase-seq, FAIRE-seq and others. The results are typically stored as genome-wide intensities (WIG/bigWig files) or functional genomic regions (peak/BED files). These data types present new challenges to big data science. Here, we present GeNemo, a web-based search engine for functional genomic data. GeNemo searches user-input data against online functional genomic datasets, including the entire collection of ENCODE and mouse ENCODE datasets. Unlike text-based search engines, GeNemo's searches are based on pattern matching of functional genomic regions. This distinguishes GeNemo from text or DNA sequence searches. The user can input any complete or partial functional genomic dataset, for example, a binding intensity file (bigWig) or a peak file. GeNemo reports any genomic regions, ranging from hundred bases to hundred thousand bases, from any of the online ENCODE datasets that share similar functional (binding, modification, accessibility) patterns. This is enabled by a Markov Chain Monte Carlo-based maximization process, executed on up to 24 parallel computing threads. By clicking on a search result, the user can visually compare her/his data with the found datasets and navigate the identified genomic regions. GeNemo is available at www.genemo.org. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.

Dynamic and cyclic fatigue of engine-driven rotary nickel-titanium endodontic instruments.

PubMed

Haïkel, Y; Serfaty, R; Bateman, G; Senger, B; Allemann, C

1999-06-01

The absence of adequate testing standards for engine-driven nickel-titanium (NiTi) instruments necessitates further study of these instruments in all areas. This study examined three groups of engine-driven rotary NiTi endodontic instruments (Profile, Hero, and Quantec) and assessed the times for dynamic fracture in relation to the radius of curvature to which the instruments were subjected during preparation, with the instrument diameter determined by size and taper and the mode by which the fracture occurred. Ten instruments were randomly selected representing each size and taper for each group and for each radius of curvature: 600 in total. The instruments were rotated at 350 rpm and introduced into a tempered steel curve that simulated a canal. Two radii of curvature of canals were used: 5 and 10 mm. Time at fracture was noted for all files, and the fracture faces of each file were analyzed with scanning electron microscopy. Radius of curvature was found to be the most significant factor in determining the fatigue resistance of the files. As radius of curvature decreased, fracture time decreased. Taper of files was found to be significant in determining fracture time. As diameter increased, fracture time decreased. In all cases, fracture was found to be of a ductile nature, thus implicating cyclic fatigue as a major cause of failure and necessitating further analyses and setting of standards in this area.

Video File - NASA Tests 2nd RS-25 Flight Engine for Space Launch System

NASA Image and Video Library

2017-10-19

Engineers at NASA’s Stennis Space Center in Mississippi on Oct. 19 completed a hot-fire test of RS-25 rocket engine E2063, a flight engine for NASA’s new Space Launch System (SLS) rocket. Engine E2063 is scheduled to help power SLS on its Exploration Mission-2 (EM-2), the first flight of the new rocket to carry humans. Flight engine E2059 was tested on March 10, 2016, also for use on the EM-2 flight.

14 CFR 203.3 - Filing requirements for adherence to Montreal Agreement.

Code of Federal Regulations, 2010 CFR

2010-01-01

... a party. U.S. air taxi operators registering under part 298 of this chapter and Canadian charter air taxi operators registering under part 294 of this chapter may comply with this requirement by filing...

14 CFR 203.3 - Filing requirements for adherence to Montreal Agreement.

Code of Federal Regulations, 2011 CFR

2011-01-01

... a party. U.S. air taxi operators registering under part 298 of this chapter and Canadian charter air taxi operators registering under part 294 of this chapter may comply with this requirement by filing...

Computational and design methods for advanced imaging

NASA Astrophysics Data System (ADS)

Birch, Gabriel C.

This dissertation merges the optical design and computational aspects of imaging systems to create novel devices that solve engineering problems in optical science and attempts to expand the solution space available to the optical designer. This dissertation is divided into two parts: the first discusses a new active illumination depth sensing modality, while the second part discusses a passive illumination system called plenoptic, or lightfield, imaging. The new depth sensing modality introduced in part one is called depth through controlled aberration. This technique illuminates a target with a known, aberrated projected pattern and takes an image using a traditional, unmodified imaging system. Knowing how the added aberration in the projected pattern changes as a function of depth, we are able to quantitatively determine depth of a series of points from the camera. A major advantage this method permits is the ability for illumination and imaging axes to be coincident. Plenoptic cameras capture both spatial and angular data simultaneously. This dissertation present a new set of parameters that permit the design and comparison of plenoptic devices outside the traditionally published plenoptic 1.0 and plenoptic 2.0 configurations. Additionally, a series of engineering advancements are presented, including full system raytraces of raw plenoptic images, Zernike compression techniques of raw image files, and non-uniform lenslet arrays to compensate for plenoptic system aberrations. Finally, a new snapshot imaging spectrometer is proposed based off the plenoptic configuration.

30. Historic view of twentythousandpound rocket test stand with engine ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

30. Historic view of twenty-thousand-pound rocket test stand with engine installation in test cell of Building 202, looking down from elevated location, September 1957. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA GRC photo number C-45872. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

50. Historic photo of Building 202 test cell interior, closeup ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

50. Historic photo of Building 202 test cell interior, closeup of test stand A, with engineer examining damage to test engine, October 21, 1966. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-66-4063. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

38. Historic photo of Building 202 test cell interior, showing ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

38. Historic photo of Building 202 test cell interior, showing damage to test stand A and rocket engine after failure and explosion of engine, December 12, 1958. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-49376. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

75 FR 80536 - Notice Pursuant to the National Cooperative Research and Production Act of 1993 National Warheads...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-22

.... Specifically, Franklin Engineering Group, Inc., Franklin, TN; RDM Engineering, LLC, East Brunswick, NJ; Rocky..., Director of Civil Enforcement, Antitrust Division. [FR Doc. 2010-32052 Filed 12-21-10; 8:45 am] BILLING...

Raw Magnetotelluric Data, McGregory Range, Fort Bliss, New Mexico

DOE Data Explorer

Nash, Greg

2017-01-01

This is a zipped file containing raw magnetotelluric (MT) data collected as part of the Phase 2 Tularosa Basin geothermal play fairway analysis project in New Mexico. The data for each MT station are in standard .edi text files which are accompanied by graphic files illustrating details. These data cover part of McGregor Range, Fort Bliss, New Mexico. The MT survey was done by Quantec Geoscience.

77 FR 37664 - Ogden City Corporation; Notice of Intent To File License Application, Filing of Pre-Application...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-22

..., Gardner Engineering Alternative Energy Services, 5875 South Adams Ave. Parkway, Ogden, Utah 84405; (801) 589-0447; [email protected] energy.com . i. FERC Contact: Kenneth Hogan at (202) 502-8434; or email... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 14217-000] Ogden City...

16. Photocopy of drawing # F1103 in files of Utilities ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

16. Photocopy of drawing # F-1103 in files of Utilities Engineering Department in Cleveland showing water flow diagram in the Division Avenue Plant. Drawing dated March 11, 1921. Flow is still in existence. - Division Avenue Pumping Station & Filtration Plant, West 45th Street and Division Avenue, Cleveland, Cuyahoga County, OH

78 FR 26357 - Alaska Electric Light & Power Company; Notice of Intent To File License Application, Filing of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-06

... Light & Power Company; Notice of Intent To File License Application, Filing of Pre-Application Document.... Date Filed: March 29, 2013. d. Submitted By: Alaska Electric Light & Power Company (AEL&P). e. Name of... Act and the joint agency regulations thereunder at 50 CFR, Part 402; (b) NOAA Fisheries under section...

20 CFR 418.3215 - Who may file your application for a subsidy?

Code of Federal Regulations, 2010 CFR

2010-04-01

... Medicare Part D Subsidies Filing of Application § 418.3215 Who may file your application for a subsidy? You or your personal representative (as defined in 42 CFR 423.772) may complete and file your subsidy... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Who may file your application for a subsidy...

20 CFR 418.3201 - Must you file an application to become eligible for a subsidy?

Code of Federal Regulations, 2010 CFR

2010-04-01

... meeting other requirements, you or your personal representative must file an application to become... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Must you file an application to become... MEDICARE SUBSIDIES Medicare Part D Subsidies Filing of Application § 418.3201 Must you file an application...

20 CFR 418.3215 - Who may file your application for a subsidy?

Code of Federal Regulations, 2011 CFR

2011-04-01

... Medicare Part D Subsidies Filing of Application § 418.3215 Who may file your application for a subsidy? You or your personal representative (as defined in 42 CFR 423.772) may complete and file your subsidy... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false Who may file your application for a subsidy...

20 CFR 418.3201 - Must you file an application to become eligible for a subsidy?

Code of Federal Regulations, 2011 CFR

2011-04-01

... meeting other requirements, you or your personal representative must file an application to become... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false Must you file an application to become... MEDICARE SUBSIDIES Medicare Part D Subsidies Filing of Application § 418.3201 Must you file an application...

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, September 1, 1943 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 6, view of construction downstream at STA. 152+50 - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, November 28, 1942 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 5, general view upstream from Franklin Street Bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, April 8, 1941 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 3, general view downstream at Stone Arch Bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, December 8, 1939 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 3, view upstream from Bethlehem steel footbridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, March 27, 1942 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 5, view of stadium upstream from point bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, July 23, 1943 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 6, view downstream from RB STA. 144+00 - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of original drawing, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of original drawing, by Corps of Engineers, U.S. Army, May 1938 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 1, lining details and typical sections of invert - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, November 28, 1942 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 5, general view downstream from Hickory Street Bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, August 22, 1941 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 4, general view upstream at STA. 40+00 - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, June 10, 1941 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 4, view of construction downstream at First Street Bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, November 19, 1943 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 6, general view upstream from Hickory Street Bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, December 4, 1939 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 3, general view downstream from Fourth Avenue Bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of original drawing, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of original drawing, by Corps of Engineers, U.S. Army, June 1939 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 3, control weir at STA. 7+00-Little Conemaugh - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, April 3, 1941 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 3, general view downstream at Fourth Avenue Bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, August 22, 1940 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 4, view upstream from point stadium - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, May 21, 1940 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 4, view downstream from Walnut Street Bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, September 7, 1938 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 1, general view at Dornick Point - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, May 28, 1941 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 5, view upstream from Franklin Street Bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, June 27, 1939 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 2, general view downstream from Coopersdale Bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, May 21, 1940 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 4, view upstream from prospect viaduct - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, May 28, 1941 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 5, view downstream from Hickory Street Bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, November 19, 1943 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 6, view of Solomon Run Outlet, looking north - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, March 27, 1942 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 4, general view upstream from Johns Street Bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, April 3, 1941 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 3, general view upstream at Fourth Avenue Bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, July 18, 1941 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 4, general view upstream at Walnut Street - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, September 27, 1940 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 2, general view of work area, looking downstream - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, April 26, 1940 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 1, general view upstream at Dornick Point - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, June 27, 1941 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 3, general view downstream from Point Bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, November 18, 1940 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 2, general view from Coopersdale Bridge ramp - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, September 27, 1940 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 3, general view downstream toward ten acre railroad bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, November 19, 1943 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 6, general view downstream from Horner Street Bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, May 28, 1941 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 6, view upstream from Hickory Street Bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, June 10, 1941 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 4, view of weir at point, looking southeast - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of original drawing, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of original drawing, by Corps of Engineers, U.S. Army,February 17, 1940 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 4, general plan and earthwork distribution - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, November 28, 1942 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 5, general view upstream STA. 40+75 - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, July, 11, 1942 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 5, general view upstream from incline bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

The Effects of Ni-Ti Hand Files, Ni-Ti Engine Files, and K-Flex Files on Root Canal Morphology

DTIC Science & Technology

1992-09-30

R. Glosson Doctor of Dental Medicine. 1984Temple University School of Dentistry A research proposal submitted to the faculty of the Endodontic...Department of the UTHSCSA Dental School in partial fullfillment of the requirements for a CERTIFICATE IN ENDODONTICS University of Texas Health Science...introduced to the dental profession. Nickel-titanium alloy has the distinct advantage in that it is both stronger and more flexible than stainless steel and

TESSIM: a simulator for the Athena-X-IFU

NASA Astrophysics Data System (ADS)

Wilms, J.; Smith, S. J.; Peille, P.; Ceballos, M. T.; Cobo, B.; Dauser, T.; Brand, T.; den Hartog, R. H.; Bandler, S. R.; de Plaa, J.; den Herder, J.-W. A.

2016-07-01

We present the design of tessim, a simulator for the physics of transition edge sensors developed in the framework of the Athena end to end simulation effort. Designed to represent the general behavior of transition edge sensors and to provide input for engineering and science studies for Athena, tessim implements a numerical solution of the linearized equations describing these devices. The simulation includes a model for the relevant noise sources and several implementations of possible trigger algorithms. Input and output of the software are standard FITS- files which can be visualized and processed using standard X-ray astronomical tool packages. Tessim is freely available as part of the SIXTE package (http://www.sternwarte.uni-erlangen.de/research/sixte/).

45 CFR 1210.3-8 - Termination file and Examiner's report.

Code of Federal Regulations, 2014 CFR

2014-10-01

... NATIONAL AND COMMUNITY SERVICE VISTA TRAINEE DESELECTION AND VOLUNTEER EARLY TERMINATION PROCEDURES VISTA Volunteer Early Termination § 1210.3-8 Termination file and Examiner's report. (a) Preparation and Content... part of the termination file. (b) Review by Volunteer. On completion of the termination file, the...

45 CFR 1210.3-8 - Termination file and Examiner's report.

Code of Federal Regulations, 2011 CFR

2011-10-01

... NATIONAL AND COMMUNITY SERVICE VISTA TRAINEE DESELECTION AND VOLUNTEER EARLY TERMINATION PROCEDURES VISTA Volunteer Early Termination § 1210.3-8 Termination file and Examiner's report. (a) Preparation and Content... part of the termination file. (b) Review by Volunteer. On completion of the termination file, the...

45 CFR 1210.3-8 - Termination file and Examiner's report.

Code of Federal Regulations, 2010 CFR

2010-10-01

... NATIONAL AND COMMUNITY SERVICE VISTA TRAINEE DESELECTION AND VOLUNTEER EARLY TERMINATION PROCEDURES VISTA Volunteer Early Termination § 1210.3-8 Termination file and Examiner's report. (a) Preparation and Content... part of the termination file. (b) Review by Volunteer. On completion of the termination file, the...

45 CFR 1210.3-8 - Termination file and Examiner's report.

Code of Federal Regulations, 2013 CFR

2013-10-01

... NATIONAL AND COMMUNITY SERVICE VISTA TRAINEE DESELECTION AND VOLUNTEER EARLY TERMINATION PROCEDURES VISTA Volunteer Early Termination § 1210.3-8 Termination file and Examiner's report. (a) Preparation and Content... part of the termination file. (b) Review by Volunteer. On completion of the termination file, the...

12 CFR Appendix G to Part 360 - Deposit-Customer Join File Structure

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 5 2014-01-01 2014-01-01 false Deposit-Customer Join File Structure G Appendix G to Part 360 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY RESOLUTION AND RECEIVERSHIP RULES Pt. 360, App. G Appendix G to Part 360—Deposit-Customer...

12 CFR Appendix G to Part 360 - Deposit-Customer Join File Structure

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 4 2011-01-01 2011-01-01 false Deposit-Customer Join File Structure G Appendix G to Part 360 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY RESOLUTION AND RECEIVERSHIP RULES Pt. 360, App. G Appendix G to Part 360—Deposit-Customer...

12 CFR Appendix G to Part 360 - Deposit-Customer Join File Structure

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 5 2012-01-01 2012-01-01 false Deposit-Customer Join File Structure G Appendix G to Part 360 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY RESOLUTION AND RECEIVERSHIP RULES Pt. 360, App. G Appendix G to Part 360—Deposit-Customer...

12 CFR Appendix G to Part 360 - Deposit-Customer Join File Structure

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 5 2013-01-01 2013-01-01 false Deposit-Customer Join File Structure G Appendix G to Part 360 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY RESOLUTION AND RECEIVERSHIP RULES Pt. 360, App. G Appendix G to Part 360—Deposit-Customer...

12 CFR Appendix H to Part 360 - Possible File Combinations for Deposit Data

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Possible File Combinations for Deposit Data H Appendix H to Part 360 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY RESOLUTION AND RECEIVERSHIP RULES Pt. 360, App. H Appendix H to Part 360—Possible...

16 CFR Appendix D to Part 698 - Standardized form for requesting annual file disclosures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Standardized form for requesting annual file disclosures. D Appendix D to Part 698 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT MODEL FORMS AND DISCLOSURES Pt. 698, App. D Appendix D to Part 698—Standardized form for...

47 CFR 27.1164 - The cost-sharing formula.

Code of Federal Regulations, 2010 CFR

2010-10-01

... control equipment; engineering costs (design/path survey); installation; systems testing; FCC filing costs; site acquisition and civil works; zoning costs; training; disposal of old equipment; test equipment... a replacement system, such as equipment and engineering expenses. C may not exceed $250,000 per...

40 CFR 300.810 - Contents of the administrative record file.

Code of Federal Regulations, 2013 CFR

2013-07-01

... determination of imminent and substantial endangerment, public health evaluations, and technical and engineering... and appropriate requirements, guidance on risk/exposure assessments, engineering handbooks, articles from technical journals, memoranda on the application of a specific regulation to a site, and memoranda...

40 CFR 300.810 - Contents of the administrative record file.

Code of Federal Regulations, 2012 CFR

2012-07-01

... determination of imminent and substantial endangerment, public health evaluations, and technical and engineering... and appropriate requirements, guidance on risk/exposure assessments, engineering handbooks, articles from technical journals, memoranda on the application of a specific regulation to a site, and memoranda...

40 CFR 300.810 - Contents of the administrative record file.

Code of Federal Regulations, 2011 CFR

2011-07-01

... determination of imminent and substantial endangerment, public health evaluations, and technical and engineering... and appropriate requirements, guidance on risk/exposure assessments, engineering handbooks, articles from technical journals, memoranda on the application of a specific regulation to a site, and memoranda...

40 CFR 300.810 - Contents of the administrative record file.

Code of Federal Regulations, 2014 CFR

2014-07-01

... determination of imminent and substantial endangerment, public health evaluations, and technical and engineering... and appropriate requirements, guidance on risk/exposure assessments, engineering handbooks, articles from technical journals, memoranda on the application of a specific regulation to a site, and memoranda...

A self-updating road map of The Cancer Genome Atlas.

PubMed

Robbins, David E; Grüneberg, Alexander; Deus, Helena F; Tanik, Murat M; Almeida, Jonas S

2013-05-15

Since 2011, The Cancer Genome Atlas' (TCGA) files have been accessible through HTTP from a public site, creating entirely new possibilities for cancer informatics by enhancing data discovery and retrieval. Significantly, these enhancements enable the reporting of analysis results that can be fully traced to and reproduced using their source data. However, to realize this possibility, a continually updated road map of files in the TCGA is required. Creation of such a road map represents a significant data modeling challenge, due to the size and fluidity of this resource: each of the 33 cancer types is instantiated in only partially overlapping sets of analytical platforms, while the number of data files available doubles approximately every 7 months. We developed an engine to index and annotate the TCGA files, relying exclusively on third-generation web technologies (Web 3.0). Specifically, this engine uses JavaScript in conjunction with the World Wide Web Consortium's (W3C) Resource Description Framework (RDF), and SPARQL, the query language for RDF, to capture metadata of files in the TCGA open-access HTTP directory. The resulting index may be queried using SPARQL, and enables file-level provenance annotations as well as discovery of arbitrary subsets of files, based on their metadata, using web standard languages. In turn, these abilities enhance the reproducibility and distribution of novel results delivered as elements of a web-based computational ecosystem. The development of the TCGA Roadmap engine was found to provide specific clues about how biomedical big data initiatives should be exposed as public resources for exploratory analysis, data mining and reproducible research. These specific design elements align with the concept of knowledge reengineering and represent a sharp departure from top-down approaches in grid initiatives such as CaBIG. They also present a much more interoperable and reproducible alternative to the still pervasive use of data portals. A prepared dashboard, including links to source code and a SPARQL endpoint, is available at http://bit.ly/TCGARoadmap. A video tutorial is available at http://bit.ly/TCGARoadmapTutorial. robbinsd@uab.edu.

A self-updating road map of The Cancer Genome Atlas

PubMed Central

Robbins, David E.; Grüneberg, Alexander; Deus, Helena F.; Tanik, Murat M.; Almeida, Jonas S.

2013-01-01

Motivation: Since 2011, The Cancer Genome Atlas’ (TCGA) files have been accessible through HTTP from a public site, creating entirely new possibilities for cancer informatics by enhancing data discovery and retrieval. Significantly, these enhancements enable the reporting of analysis results that can be fully traced to and reproduced using their source data. However, to realize this possibility, a continually updated road map of files in the TCGA is required. Creation of such a road map represents a significant data modeling challenge, due to the size and fluidity of this resource: each of the 33 cancer types is instantiated in only partially overlapping sets of analytical platforms, while the number of data files available doubles approximately every 7 months. Results: We developed an engine to index and annotate the TCGA files, relying exclusively on third-generation web technologies (Web 3.0). Specifically, this engine uses JavaScript in conjunction with the World Wide Web Consortium’s (W3C) Resource Description Framework (RDF), and SPARQL, the query language for RDF, to capture metadata of files in the TCGA open-access HTTP directory. The resulting index may be queried using SPARQL, and enables file-level provenance annotations as well as discovery of arbitrary subsets of files, based on their metadata, using web standard languages. In turn, these abilities enhance the reproducibility and distribution of novel results delivered as elements of a web-based computational ecosystem. The development of the TCGA Roadmap engine was found to provide specific clues about how biomedical big data initiatives should be exposed as public resources for exploratory analysis, data mining and reproducible research. These specific design elements align with the concept of knowledge reengineering and represent a sharp departure from top-down approaches in grid initiatives such as CaBIG. They also present a much more interoperable and reproducible alternative to the still pervasive use of data portals. Availability: A prepared dashboard, including links to source code and a SPARQL endpoint, is available at http://bit.ly/TCGARoadmap. A video tutorial is available at http://bit.ly/TCGARoadmapTutorial. Contact: robbinsd@uab.edu PMID:23595662

77 FR 11523 - Bryant Mountain, LLC; Notice of Intent To File License Application, Filing of Pre-Application...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-27

... and Commencing Pre-filing Process. b. Project No.: 13680-001. c. Dated Filed: December 21, 2011. d... Reclamation and private lands. g. Filed Pursuant to: 18 CFR Part 5 of the Commission's Regulations. h..., California, 94505, (925) 634-1550 or email at [email protected] . i. FERC Contact: Ryan Hansen at (202...

78 FR 70548 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-26

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Combined Notice of Filings 1 Take notice that the Commission received the following electric rate filings: Docket Numbers: ER10-1246-006; ER10... Agreements Re-Collation Part 1 to be effective 11/20/2013. Filed Date: 11/19/13. Accession Number: 20131119...

14 CFR 221.30 - Passenger fares and charges.

Code of Federal Regulations, 2010 CFR

2010-01-01

... PROCEEDINGS) ECONOMIC REGULATIONS TARIFFS Manner of Filing Tariffs § 221.30 Passenger fares and charges. (a... necessary to carry out the purposes of this part, the applicant carrier to file fare tariffs in a paper format. Such waivers shall only be considered where electronic filing, compared to paper filing, is...

30 CFR 28.30 - Quality control plans; filing requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Quality control plans; filing requirements. 28... PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.30 Quality control plans; filing... part, each applicant shall file with MSHA a proposed quality control plan which shall be designed to...

30 CFR 28.30 - Quality control plans; filing requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Quality control plans; filing requirements. 28... PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.30 Quality control plans; filing... part, each applicant shall file with MSHA a proposed quality control plan which shall be designed to...

30 CFR 28.30 - Quality control plans; filing requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.30 Quality control plans; filing... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Quality control plans; filing requirements. 28... part, each applicant shall file with MSHA a proposed quality control plan which shall be designed to...

30 CFR 28.30 - Quality control plans; filing requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.30 Quality control plans; filing... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Quality control plans; filing requirements. 28... part, each applicant shall file with MSHA a proposed quality control plan which shall be designed to...

30 CFR 28.30 - Quality control plans; filing requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... PROTECTION FOR TRAILING CABLES IN COAL MINES Quality Control § 28.30 Quality control plans; filing... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Quality control plans; filing requirements. 28... part, each applicant shall file with MSHA a proposed quality control plan which shall be designed to...

75 FR 35782 - Combined Notice of Filings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-23

.... Eastern Time on Monday, June 21, 2010. Docket Numbers: OR10-16-000. Applicants: MV Purchasing, LLC. Description: MV Purchasing, LLC. files a request for temporary waiver of the tariff filing and reporting... U.S.C. app. Sec. Sec. 6, 20 (1988), and parts 341 and 357 of the Commission's regulations. Filed...

7 CFR 47.25 - Filing; extensions of time; effective date of filing; computations of time; official notice.

Code of Federal Regulations, 2011 CFR

2011-01-01

... transmittal), if, in the judgment of the examiner or the Secretary, as the case may be, there is good reason... the regulations in this part to be filed shall be deemed to be filed when it reaches the Department in...

15 CFR 30.2 - General requirements for filing Electronic Export Information (EEI).

Code of Federal Regulations, 2014 CFR

2014-01-01

... definitions, specifications, and requirements of the regulations in this part for all export shipments, except... 15 Commerce and Foreign Trade 1 2014-01-01 2014-01-01 false General requirements for filing... Requirements § 30.2 General requirements for filing Electronic Export Information (EEI). (a) Filing...

77 FR 4853 - In the Matter of Airbee Wireless, Inc., Axial Vector Engine Corp. (n/k/a Avec Corporation), and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-31

... Vector Engine Corp. (n/k/a Avec Corporation), and Exploration Drilling International, Inc.; Order of... securities of Axial Vector Engine Corp. (n/k/a Avec Corporation) because it has not filed any periodic...(k) of the Securities Exchange Act of 1934, that trading in the securities of the above-listed...

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, May 23, 1940 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 3, view of channel excavation downstream at Fourth Avenue Bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of original drawing, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of original drawing, by Corps of Engineers, U.S. Army,February 17, 1940 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 4, plan and profile, STA. 15+00 to STA. 24+00 - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, November 19, 1943 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 6, view of WPA masonry wall and dike upstream from Central Avenue Bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, November 23, 1938 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 1, section of wall in progress, looking downstream from lb STA. 43+00 - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, June 3, 1942 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 6, view of Solomon Run, looking north, RB STA. 135+25 - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of original drawing, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of original drawing, by Corps of Engineers, U.S. Army, February 1939 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 2, cross sections, STA. 96+52.0 to STA. 101+53.5 - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, April 24, 1942 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 5, view of channel excavation upstream at Franklin Street Bridge - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

CBCT Assessment of Root Dentine Removal by Gates-Glidden Drills and Two Engine-Driven Root Preparation Systems.

PubMed

Harandi, Azade; Mohammadpour Maleki, Fatemeh; Moudi, Ehsan; Ehsani, Maryam; Khafri, Soraya

2017-01-01

The aim of this study was to compare the dentine removing efficacy of Gates-Glidden drills with hand files, ProTaper and OneShape single-instrument system using cone-beam computed tomography (CBCT). A total of 39 extracted bifurcated maxillary first premolars were divided into 3 groups ( n =13) and were prepared using either Gates-Glidden drills and hand instruments, ProTaper and OneShape systems. Pre- and post-instrumentation CBCT images were obtained. The dentin thickness of canals was measured at furcation, and 1 and 2 mm from the furcation area in buccal, palatal, mesial and distal walls. Data were analyzed using one-way ANOVA test. Tukey's post hoc tests were used for two-by-two comparisons. Gates-Glidden drills with hand files removed significantly more ( P <0.001) dentine than the engine-driven systems in all canal walls (buccal, palatal, mesial and distal). There were no significant differences between OneShape and ProTaper rotary systems ( P >0.05). The total cervical dentine removal during canal instrumentation was significantly less with engine-driven file systems compared to Gates-Glidden drills. There were no significant differences between residual dentine thicknesses left between the various canal walls.

14 CFR 292.22 - Effectiveness of tariffs on file.

Code of Federal Regulations, 2010 CFR

2010-01-01

... under 49 USC 41504 and the provisions of 14 CFR part 221, and are cancelled by operation of law. Any... adherence to filed tariffs in 49 USC 41510 and the related provisions of 14 CFR part 221 as of November 30...

75 FR 72794 - Marine Mammals; File No. 14628

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-26

... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration RIN 0648-XX08 Marine Mammals; File No. 14628 AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric... of marine mammal and endangered species parts. The applicant is requesting parts of all marine mammal...

Computer code for estimating installed performance of aircraft gas turbine engines. Volume 3: Library of maps

NASA Technical Reports Server (NTRS)

Kowalski, E. J.

1979-01-01

A computerized method which utilizes the engine performance data and estimates the installed performance of aircraft gas turbine engines is presented. This installation includes: engine weight and dimensions, inlet and nozzle internal performance and drag, inlet and nacelle weight, and nacelle drag. The use of two data base files to represent the engine and the inlet/nozzle/aftbody performance characteristics is discussed. The existing library of performance characteristics for inlets and nozzle/aftbodies and an example of the 1000 series of engine data tables is presented.

3D Printing of Tissue Engineered Constructs for In Vitro Modeling of Disease Progression and Drug Screening.

PubMed

Vanderburgh, Joseph; Sterling, Julie A; Guelcher, Scott A

2017-01-01

2D cell culture and preclinical animal models have traditionally been implemented for investigating the underlying cellular mechanisms of human disease progression. However, the increasing significance of 3D vs. 2D cell culture has initiated a new era in cell culture research in which 3D in vitro models are emerging as a bridge between traditional 2D cell culture and in vivo animal models. Additive manufacturing (AM, also known as 3D printing), defined as the layer-by-layer fabrication of parts directed by digital information from a 3D computer-aided design file, offers the advantages of simultaneous rapid prototyping and biofunctionalization as well as the precise placement of cells and extracellular matrix with high resolution. In this review, we highlight recent advances in 3D printing of tissue engineered constructs that recapitulate the physical and cellular properties of the tissue microenvironment for investigating mechanisms of disease progression and for screening drugs.

3D Printing of Tissue Engineered Constructs for in vitro Modeling of Disease Progression and Drug Screening

PubMed Central

Vanderburgh, Joseph; Sterling, Julie A.

2016-01-01

2D cell culture and preclinical animal models have traditionally been implemented for investigating the underlying cellular mechanisms of human disease progression. However, the increasing significance of 3D versus 2D cell culture has initiated a new era in cell culture research in which 3D in vitro models are emerging as a bridge between traditional 2D cell culture and in vivo animal models. Additive manufacturing (AM, also known as 3D printing), defined as the layer-by-layer fabrication of parts directed by digital information from a 3D computer-aided design (CAD) file, offers the advantages of simultaneous rapid prototyping and biofunctionalization as well as the precise placement of cells and extracellular matrix with high resolution. In this review, we highlight recent advances in 3D printing of tissue engineered constructs (TECs) that recapitulate the physical and cellular properties of the tissue microenvironment for investigating mechanisms of disease progression and for screening drugs. PMID:27169894

76 FR 16407 - Notice Announcing Preliminary Permit Drawing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-23

... preliminary permit applications deemed filed on May 18, 2010, at 8:30 a.m.,\\1\\ for proposed projects to be located at the Army Corps of Engineers' Maxwell Lock and Dam on the Monongahela River, in Washington... business hours is considered filed at 8:30 a.m. on the next regular business day. 18 CFR 385.2001(a)(2...

26. Historic view of Building 202, May 22, 1957. On ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

26. Historic view of Building 202, May 22, 1957. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA GRC photo number C-45652.On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-46492. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

Publications - PDF 98-37B v. 1.1 | Alaska Division of Geological &

Science.gov Websites

Alaska's Mineral Industry Reports AKGeology.info Rare Earth Elements WebGeochem Engineering Geology Alaska ) Digital Geospatial Data Digital Geospatial Data Tanana A-1 and A-2 bedrock geology Data File Format File ; Bedrock; Bedrock Geologic Map; Bedrock Geology; CIPW Norms; Cerium; Dome; Economic Geology; Faults

77 FR 1923 - Solia 8 Hydroelectric, LLC, FFP Missouri 13, LLC, et al.; Notice of Intent To File License...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-12

... Filed: November 16, 2011. d. Submitted By: Free Flow Power Corporation on behalf of its subsidiary limited liability corporations (listed above and collectively referred to below as ``Free Flow Power''). e... would occupy United States lands administered by the U.S. Army Corps of Engineers. Project No. Projects...

75 FR 43208 - Withdrawal of Regulatory Guide 5.17

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-23

... Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, Washington, DC 20555.... Introduction The U.S. Nuclear Regulatory Commission (NRC) is withdrawing Regulatory Guide 5.17, ``Truck... Development Branch, Division of Engineering, Office of Nuclear Regulatory Research. [FR Doc. 2010-18077 Filed...

Retaining minorities in engineering: Assessment of a program prototype

NASA Astrophysics Data System (ADS)

Good, Jennifer Marie (Phillips)

Program assessment is an essential part of healthy program development. Assessment should include multiple considerations, dimensions, and outcomes that match the program's objectives. As a newly formed retention program, the Auburn University Minority Engineering Program, designed to help pre-engineering minority students make the transition into their freshman year of university studies, incorporated evaluation and assessment into all three components of the program (the interactive learning laboratory, critical-thinking workshops, and Sunday-evening tutorials) from the program's inception. If students successfully adapted to the university environment and the demands of the pre-engineering course of study, then retention of minority students in the College of Engineering should improve. Data were gathered on the students involved in the various program components. Students who entered the Minority Engineering Program were pre- and posttested on three standardized subtests (critical thinking, mathematics, and science reasoning) of the Collegiate Assessment of Academic Proficiency. The first-quarter grade-point averages of the students were also gathered to compare their grades to freshman students in previous quarters within the College of Engineering. Qualitative data were also gathered on this same group of students. An analysis of the data revealed that student achievement is affected by involvement in the Minority Engineering Program. Specifically, the first quarter grade point averages of students involved in the program exceeded those of their peers in earlier years of study prior to the program's existence. In addition, mathematics and science reasoning scores on standardized tests increased pre- to postintervention. Comments collected in journals and files also demonstrated use of critical-thinking and problem-solving skills employed by the students. Recommendations for alterations of the program were made based on the outcome of the program evaluation. Further suggestions for research in minority engineering program development and evaluation were also discussed.

Discovery in a World of Mashups

NASA Astrophysics Data System (ADS)

King, T. A.; Ritschel, B.; Hourcle, J. A.; Moon, I. S.

2014-12-01

When the first digital information was stored electronically, discovery of what existed was through file names and the organization of the file system. With the advent of networks, digital information was shared on a wider scale, but discovery remained based on file and folder names. With a growing number of information sources, named based discovery quickly became ineffective. The keyword based search engine was one of the first types of a mashup in the world of Web 1.0. Embedded links from one document to another with prescribed relationships between files and the world of Web 2.0 was formed. Search engines like Google used the links to improve search results and a worldwide mashup was formed. While a vast improvement, the need for semantic (meaning rich) discovery was clear, especially for the discovery of scientific data. In response, every science discipline defined schemas to describe their type of data. Some core schemas where shared, but most schemas are custom tailored even though they share many common concepts. As with the networking of information sources, science increasingly relies on data from multiple disciplines. So there is a need to bring together multiple sources of semantically rich information. We explore how harvesting, conceptual mapping, facet based search engines, search term promotion, and style sheets can be combined to create the next generation of mashups in the emerging world of Web 3.0. We use NASA's Planetary Data System and NASA's Heliophysics Data Environment to illustrate how to create a multi-discipline mash-up.

Potential time savings to radiology department personnel in a PACS-based environment

NASA Astrophysics Data System (ADS)

Saarinen, Allan O.; Wilson, M. C.; Iverson, Scott C.; Loop, John W.

1990-08-01

A purported benefit of digital imaging and archiving of radiographic procedures is the presumption of time savings to radiologists, radiology technologists, and radiology departmentpersonnel involved with processingfilms and managing theflimfile room. As part of the University of Washington's evaluation of Picture Archiving and Communication Systems (PACS)for the U.S. Army Medical Research and Development Command, a study was performed which evaluated the current operationalpractices of the film-based radiology department at the University of Washington Medical Center (UWMC). Industrial engineering time and motion studies were conducted to document the length of time requiredforfilm processing in various modalities, the proportion of the total exam time usedforfilm processing, the amount of time radiologists spent searchingfor and looking at images, and the amount of time file room personnel spent collating reports, making loans, updatingfilm jacket information, and purging files. This evaluation showed that better than one-half of the tasks in the file room may be eliminated with PACS and radiologists may save easily 10 percent of the time they spend reading films by no longer having to searchforfilms. Radiology technologists may also save as much as 10 percent of their time with PACS, although this estimate is subject to significant patient mix aberrations and measurement error. Given that the UWMC radiology department operates efficiently, similar improvements are forecast for other radiology departments and larger improvements areforecastfor less efficient departments.

As-built design specification for PARCLS

NASA Technical Reports Server (NTRS)

Tompkins, M. A. (Principal Investigator)

1981-01-01

The PARCLS program, part of the CLASFYG package, reads a parameter file created by the CLASFYG program and a pure pixel ground truth file in order to create to classification file of three separate crop categories in universal format.

40 CFR 78.4 - Filings.

Code of Federal Regulations, 2010 CFR

2010-07-01

... § 78.4 Filings. (a) All original filings made under this part shall be signed by the person making the... behalf of persons with an interest in allowances in a general account shall be signed by the authorized account representative. Any filings on behalf of owners and operators of a NOX Budget unit or source shall...

34 CFR 81.12 - Filing requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... next business day. (e) A party filing by facsimile transmission is responsible for confirming that a... 34 Education 1 2010-07-01 2010-07-01 false Filing requirements. 81.12 Section 81.12 Education... Provisions § 81.12 Filing requirements. (a) Any written submission to an ALJ or the OALJ under this part must...

12 CFR 16.17 - Filing requirements and inspection of documents.

Code of Federal Regulations, 2010 CFR

2010-01-01

... the submission of any fee required under § 16.33 of this part. (e) Any filing of amendments or... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Filing requirements and inspection of documents... SECURITIES OFFERING DISCLOSURE RULES § 16.17 Filing requirements and inspection of documents. (a) Except as...

78 FR 77107 - Notice of Availability for Exclusive, Non-Exclusive, or Partially-Exclusive Licensing of an...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-20

..., or Partially-Exclusive Licensing of an Invention Concerning Preoperative Recommendations Engine..., entitled ``Preoperative Recommendations Engine,'' filed on January 14, 2013. The United States Government.... Army Medical Research and Materiel Command, ATTN: Command Judge Advocate, MCMR-JA, 504 Scott Street...

47 CFR 27.1180 - The cost-sharing formula.

Code of Federal Regulations, 2010 CFR

2010-10-01

...); towers and/or modifications; back-up power equipment; monitoring or control equipment; engineering costs (design/path survey); installation; systems testing; FCC filing costs; site acquisition and civil works... as equipment and engineering expenses. There is no cap on the actual costs of relocation. (c) An AWS...

75 FR 79049 - Notice of Issuance of Regulatory Guide

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-17

..., Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission... INFORMATION: I. Introduction The U.S. Nuclear Regulatory Commission (NRC) is issuing a revision to an existing... Development Branch, Division of Engineering, Office of Nuclear Regulatory Research. [FR Doc. 2010-31731 Filed...

14. Photocopy of engineering drawing, Buildings 28 and 28A: Steam ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. Photocopy of engineering drawing, Buildings 28 and 28A: Steam Heating System, 1918 (original on file with the Norfolk Naval Shipyard, Portsmouth, Virginia) - Norfolk Naval Shipyard, Building No. 28A, Adjoining Buildings No. 28 & 29 on Shubrick & Breeze Streets, Portsmouth, Portsmouth, VA

Genie Inference Engine Rule Writer’s Guide.

DTIC Science & Technology

1987-08-01

33 APPENDIX D. Animal Bootstrap File.............................................................. 39...APPENDIX E. Sample Run of Animal Identification Expert System.......................... 43 APPENDIX F. Numeric Test Knowledge Base...and other data s.tructures stored in the knowledge base (KB), queries the user for input, and draws conclusions. Genie (GENeric Inference Engine) is

Aspects on Transfer of Aided - Design Files

NASA Astrophysics Data System (ADS)

Goanta, A. M.; Anghelache, D. G.

2016-08-01

At this stage of development of hardware and software, each company that makes design software packages has a certain type of file created and customized in time to distinguish that company from its competitors. Thus today are widely known the DWG files belonging AutoCAD, IPT / IAM belonging to Inventor, PAR / ASM of Solid Edge's, PRT from the NX and so on. Behind every type of file there is a mathematical model which is common to more types of files. A specific aspect of the computer -aided design is that all softwares are working with both individual parts and assemblies, but their approach is different in that some use the same type of file both for each part and for the whole (PRT ), while others use different types of files (IPT / IAM, PAR / ASM, etc.). Another aspect of the computer -aided design is to transfer files between different companies which use different software packages or even the same software package but in different versions. Each of these situations generates distinct issues. Thus, to solve the partial reading by a project different from the native one, transfer files of STEP and IGES type are used

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, December 8, 1939 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 3, View of Balustrade Wall from footbridge, looking upstream from lb STA. 173+00 - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, June 7, 1940 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 2, view of left bank in construction, looking downstream from RB STA. 63+75 - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

Photographic copy of historic photograph, by Corps of Engineers, U.S. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photographic copy of historic photograph, by Corps of Engineers, U.S. Army, September 4, 1940 (original in possession of Corps of Engineers, U.S. Army, Pittsburgh District, Engineering Division files) Unit 4, view of water line construction upstream at Walnut Street Bridgeupstream from point stadium - Johnstown Local Flood Protection Project, Beginning on Conemaugh River approx 3.8 miles downstream from confluence of Little Conemaugh & Stony Creek Rivers at Johnstown, Johnstown, Cambria County, PA

5 CFR 2634.602 - Filing of reports.

Code of Federal Regulations, 2010 CFR

2010-01-01

... part. (b) The President, the Vice President, any independent counsel, and persons appointed by independent counsel under 28 U.S.C. chapter 40, shall file the public financial disclosure reports required... part. (e) Candidates for President and Vice President identified in § 2634.201(d), other than an...

78 FR 57133 - Marine Mammals; File No. 14514

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-17

... of marine mammal parts (hard and soft parts) from up to 200 animals per year within the order Cetacea... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration RIN 0648-XW11 Marine Mammals; File No. 14514 AGENCY: National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric...

47 CFR 1.10006 - Is electronic filing mandatory?

Code of Federal Regulations, 2010 CFR

2010-10-01

.... A list of forms that are available for electronic filing can be found on the IBFS homepage. For information on electronic filing requirements, see part 1, §§ 1.1000 through 1.10018 and the IBFS homepage at...

Turbomachinery Forced Response Prediction System (FREPS): User's Manual

NASA Technical Reports Server (NTRS)

Morel, M. R.; Murthy, D. V.

1994-01-01

The turbomachinery forced response prediction system (FREPS), version 1.2, is capable of predicting the aeroelastic behavior of axial-flow turbomachinery blades. This document is meant to serve as a guide in the use of the FREPS code with specific emphasis on its use at NASA Lewis Research Center (LeRC). A detailed explanation of the aeroelastic analysis and its development is beyond the scope of this document, and may be found in the references. FREPS has been developed by the NASA LeRC Structural Dynamics Branch. The manual is divided into three major parts: an introduction, the preparation of input, and the procedure to execute FREPS. Part 1 includes a brief background on the necessity of FREPS, a description of the FREPS system, the steps needed to be taken before FREPS is executed, an example input file with instructions, presentation of the geometric conventions used, and the input/output files employed and produced by FREPS. Part 2 contains a detailed description of the command names needed to create the primary input file that is required to execute the FREPS code. Also, Part 2 has an example data file to aid the user in creating their own input files. Part 3 explains the procedures required to execute the FREPS code on the Cray Y-MP, a computer system available at the NASA LeRC.

Solid Freeform Fabrication Proceedings -1999

DTIC Science & Technology

1999-08-11

geometry of the stylus. Some geometries cannot be used to acquire data if the part geometry interferes 48 with a feature on the part. Thus, the data...fabrication processing systems such as surface micro- machining and lithography . 63 Conclusion The LCVD system (figure 6) has the versatility and...part, creating STL (STereo Lithography ) or VRML (Virtual Reality Modeling Language) files, slicing them, converting into laser path files, and

Glenn Heat Transfer Simulation and Solver Graphical User Interface: Development and Testing

NASA Technical Reports Server (NTRS)

Kardamis, Joseph R.

2004-01-01

In the Tui ine Branch of the Turbomachinery and Propulsion Systems Division, researching and developing efficient turbine aerothermodynamics technologies is the main objective. Creating effective turbines for jet engines is a process which, if based purely on physical experimental testing, would be extremely expensive. It is for this reason, and also for the reasons of speed and ease, that the Turbine Branch spends a large amount of effort working with simulations of turbines. Specifically, they focus their work on two main fields: Computational Field Dynamics (CFD), and Experimental data analysis. The experimental field involves comparing experimental results to simulated results, whereas the CFD field involves running these simulations. The simulations are applied to aerodynamics and heat transfer cases, for both steady and unsteady flow conditions. By and large this work is applied to the domain of flow and heat transfer in axial turbines. The main application used to run these heat flow simulations is GlennHT. This program, recently rewritten in FORTRAN 90, allows the user to input a job file which specifies all the necessary parameters needed to simulate flow through a user-defined grid. There are several other executables used as well, ranging in application from converting grid files to and from particular formats, to merging blocks in a connectivity file, to converting connectivity files to a GlennHT compatible format. All of these executables are run from the command line in a terminal; some of them have interactive prompts where the user must specify the files to be manipulated after the program starts, while others take all of their parameters from the command line. With this amount of variation comes a good deal of commands and formats to memorize, which can cause slower and less efficient work, as users may forget how to execute a certain program, or not remember the pathnames of the files they wish to use. Two years ago, steps were made to expedite this process with a graphical user interface (GUI) that combines the functionality of all the executables along with adding some new functionality, such as residuals graphing and boundary conditions creation. Upon my beginning here at Glenn, many parts of the GUI, which was developed in Java, were nonfunctional. There were also issues with cross-platforming, as systems in the branch were transitioning from Silicon Graphics (SGI) machines to Linux machines. My goals this summer are to finish the parts of the GUI that are not yet completed, fix parts that did not work correctly, expand the functionality to include other useful features, such as grid surface highlighting, and make the system compatible with both Linux and SGI. I will also be heavily testing the system and providing sufficient documentation on how to use the GUI, as no such documentation existed previously.

11 CFR 105.4 - Place of filing; political committees and other persons (2 U.S.C. 432(g)(4)).

Code of Federal Regulations, 2010 CFR

2010-01-01

... 11 Federal Elections 1 2010-01-01 2010-01-01 false Place of filing; political committees and other... DOCUMENT FILING (2 U.S.C. 432(g)) § 105.4 Place of filing; political committees and other persons (2 U.S.C... amendments thereto, required to be filed under 11 CFR parts 101, 102, and 104 by a political committee other...

77 FR 785 - BOST5 Hydroelectric Company, LLC, (BOST5); Notice of Application Accepted for Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-06

... (BOST5). e. Name of Project: Red River Lock & Dam No. 5 Hydroelectric Project. f. Location: The proposed project would be located at the existing Army Corps of Engineer's (Corps) Red River Lock & Dam No. 5 on the Red River, in Bassier Parish near the Town of Ninock, Louisiana. g. Filed Pursuant to: Federal...

76 FR 14651 - BOST4 Hydroelectric Company, LLC; Notice of Application Tendered for Filing With the Commission...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-17

... (BOST4). e. Name of Project: Red River Lock & Dam No. 4 Hydroelectric Project. f. Location: The proposed project would be located at the existing Army Corps of Engineer's (Corps) Red River Lock & Dam No. 4 on the Red River, in Red River Parish near the City of Coushatta, Louisiana. g. Filed Pursuant to...

78 FR 48667 - Western Minnesota Municipal Power Agency; Notice of Application Accepted for Filing, Soliciting...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-09

... Project: Red Rock Hydroelectric Project f. Location: The project is located at the U.S. Army Corps of Engineers Lake Red Rock Dam on the Des Moines River in Marion County, Iowa. g. Filed Pursuant to: Federal... Room, located at 888 First Street NE., Room 2A, Washington, DC 20426, or by calling (202) 502-8371...

77 FR 786 - BOST4 Hydroelectric Company, LLC, (BOST4); Notice of Application Accepted for Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-06

... (BOST4). e. Name of Project: Red River Lock & Dam No. 4 Hydroelectric Project. f. Location: The proposed project would be located at the existing Army Corps of Engineer's (Corps) Red River Lock & Dam No. 4 on the Red River, in Red River Parish near the Town of Coushatta, Louisiana. g. Filed Pursuant to...

76 FR 14653 - BOST3 Hydroelectric Company, LLC (BOST3); Notice of Application Accepted for Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-17

...). e. Name of Project: Red River Lock & Dam No. 3 Hydroelectric Project. f. Location: The proposed project would be located at the existing Army Corps of Engineer's (Corps) Red River Lock & Dam No. 3 on the Red River, in Natchitoches Parish near the City of Colfax, Louisiana. g. Filed Pursuant to...

77 FR 74520 - Encore Clean Energy, Inc., Energy & Engine Technology Corp., Equity Media Holdings Corporation...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-14

... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] Encore Clean Energy, Inc., Energy & Engine Technology Corp., Equity Media Holdings Corporation, eTotalSource, Inc., Extensions, Inc., Firepond, Inc., and GNC Energy Corporation; Order Withdrawing Trading Suspension as to Extensions, Inc. December 12...

32 CFR 644.424 - Development of public port or industrial facilities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... industrial facilities upon the available land shall file a written application with the District Engineer... development of public port or industrial facilities, the District Engineer shall give notice of such... 32 National Defense 4 2011-07-01 2011-07-01 false Development of public port or industrial...

32 CFR 644.424 - Development of public port or industrial facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... industrial facilities upon the available land shall file a written application with the District Engineer... development of public port or industrial facilities, the District Engineer shall give notice of such... 32 National Defense 4 2010-07-01 2010-07-01 true Development of public port or industrial...

Software Engineering Laboratory (SEL). Data base organization and user's guide, revision 1

NASA Technical Reports Server (NTRS)

Lo, P. S.; Wyckoff, D.; Page, J.; Mcgarry, F. E.

1983-01-01

The structure of the Software Engineering Laboratory (SEL) data base is described. It defines each data base file in detail and provides information about how to access and use the data for programmers and other users. Several data base reporting programs are described also.

31. Historic view of Building 202 test stand A with ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

31. Historic view of Building 202 test stand A with rocket engine, November 19, 1957. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA GRC photo number C-46491. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

4. Historic photo of fuel and oxidant tanks in hilltop ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. Historic photo of fuel and oxidant tanks in hilltop area of rocket engine test facility. 1956. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA GRC photo number C-1956-160D. - Rocket Engine Testing Facility, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

76 FR 50275 - Guidance for the Assessment of Beyond-Design-Basis Aircraft Impacts

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-12

...: Mekonen M. Bayssie, Regulatory Guide Development Branch, Division of Engineering, Office of Nuclear... e-mail to [email protected] . SUPPLEMENTARY INFORMATION: I. Introduction The Nuclear..., Division of Engineering, Office of Nuclear Regulatory Research. [FR Doc. 2011-20513 Filed 8-11-11; 8:45 am...

75 FR 16525 - Notice of Issuance of Regulatory Guide

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-01

... CONTACT: Mekonen M. Bayssie, Regulatory Guide Development Branch, Division of Engineering, Office of...) 251-7489 or e-mail [email protected] . SUPPLEMENTARY INFORMATION: I. Introduction The U.S..., Division of Engineering, Office of Nuclear Regulatory Research. [FR Doc. 2010-7391 Filed 3-31-10; 8:45 am...

76 FR 63537 - Mandatory Electronic Filing for Agencies and Attorneys at Washington Regional Office and Denver...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-13

... believes e-filing would create an undue burden may request an exemption from the administrative [email protected] . SUPPLEMENTARY INFORMATION: 1. History of MSPB's E-Filing Initiative On February 26, 2008, MSPB issued final regulations at 5 CFR parts 1201, 1203, 1208, and 1209 governing e-filing. 73 FR 10127...

5 CFR 2429.21 - Computation of time for filing papers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 3 2011-01-01 2011-01-01 false Computation of time for filing papers... REQUIREMENTS General Requirements § 2429.21 Computation of time for filing papers. (a) In computing any period... § 2429.23(a) of this part, when this subchapter requires the filing of any paper with the Authority, the...

78 FR 50395 - Endangered Species; File Nos. 17557 and 17273

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-19

... marine mammal and endangered species parts had been submitted by the above-named organizations. The requested permits have been issued under the authority of the Endangered Species Act of 1973, as amended... (File No. 17273), have been issued permits to take marine mammal and endangered species parts for...

14 CFR 16.13 - Filing of documents.

Code of Federal Regulations, 2010 CFR

2010-01-01

... knowledge, information, and belief, the document is— (1) Consistent with this part; (2) Warranted by... proceeding. If any of these items change during the proceeding, the person shall promptly file notice of the change with the FAA Part 16 Airport Proceedings Docket and the hearing officer and shall serve the notice...

34 CFR 303.440 - Filing a due process complaint.

Code of Federal Regulations, 2014 CFR

2014-07-01

... AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION EARLY INTERVENTION PROGRAM FOR INFANTS AND... early intervention services to the infant or toddler with a disability and his or her family under part... filing a due process complaint under this part, in the time allowed by that State law, except that the...

34 CFR 303.440 - Filing a due process complaint.

Code of Federal Regulations, 2012 CFR

2012-07-01

... AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION EARLY INTERVENTION PROGRAM FOR INFANTS AND... early intervention services to the infant or toddler with a disability and his or her family under part... filing a due process complaint under this part, in the time allowed by that State law, except that the...

34 CFR 303.440 - Filing a due process complaint.

Code of Federal Regulations, 2013 CFR

2013-07-01

... AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION EARLY INTERVENTION PROGRAM FOR INFANTS AND... early intervention services to the infant or toddler with a disability and his or her family under part... filing a due process complaint under this part, in the time allowed by that State law, except that the...

18 CFR Appendix 1 to Part 301 - ASC Utility Filing Template

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false ASC Utility Filing Template 1 Appendix 1 to Part 301 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS FOR FEDERAL POWER MARKETING ADMINISTRATIONS AVERAGE SYSTEM COST...

18 CFR Appendix 1 to Part 301 - ASC Utility Filing Template

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false ASC Utility Filing Template 1 Appendix 1 to Part 301 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS FOR FEDERAL POWER MARKETING ADMINISTRATIONS AVERAGE SYSTEM COST...

18 CFR Appendix 1 to Part 301 - ASC Utility Filing Template

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false ASC Utility Filing Template 1 Appendix 1 to Part 301 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS FOR FEDERAL POWER MARKETING ADMINISTRATIONS AVERAGE SYSTEM COST...

18 CFR Appendix 1 to Part 301 - ASC Utility Filing Template

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false ASC Utility Filing Template 1 Appendix 1 to Part 301 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS FOR FEDERAL POWER MARKETING ADMINISTRATIONS AVERAGE SYSTEM COST...

18 CFR Appendix 1 to Part 301 - ASC Utility Filing Template

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false ASC Utility Filing Template 1 Appendix 1 to Part 301 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS FOR FEDERAL POWER MARKETING ADMINISTRATIONS AVERAGE SYSTEM COST...

12 CFR 615.5250 - Disclosure requirements for borrower stock.

Code of Federal Regulations, 2011 CFR

2011-01-01

... with the following documents prior to loan closing: (1) The institution's most recent annual report filed under part 620 of this chapter; (2) The institution's most recent quarterly report filed under part 620 of this chapter, if more recent than the annual report; (3) A copy of the institution's...

12 CFR 615.5250 - Disclosure requirements for borrower stock.

Code of Federal Regulations, 2012 CFR

2012-01-01

... with the following documents prior to loan closing: (1) The institution's most recent annual report filed under part 620 of this chapter; (2) The institution's most recent quarterly report filed under part 620 of this chapter, if more recent than the annual report; (3) A copy of the institution's...

47 CFR 1.1703 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... (CARS). All services authorized under part 78 of this title. (e) Filings. Any application, notification... conveyed by operation of rule upon filing notification of aeronautical frequency usage by MVPDs or... database, application filing system, and processing system for Multichannel Video and Cable Television...

47 CFR 25.110 - Filing of applications, fees, and number of copies.

Code of Federal Regulations, 2010 CFR

2010-10-01

... through the International Bureau Filing System (IBFS) in accordance with the applicable provisions of part... copies. 25.110 Section 25.110 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES SATELLITE COMMUNICATIONS Applications and Licenses General Application Filing...

47 CFR 25.110 - Filing of applications, fees, and number of copies.

Code of Federal Regulations, 2012 CFR

2012-10-01

... through the International Bureau Filing System (IBFS) in accordance with the applicable provisions of part... copies. 25.110 Section 25.110 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES SATELLITE COMMUNICATIONS Applications and Licenses General Application Filing...

47 CFR 25.110 - Filing of applications, fees, and number of copies.

Code of Federal Regulations, 2011 CFR

2011-10-01

... through the International Bureau Filing System (IBFS) in accordance with the applicable provisions of part... copies. 25.110 Section 25.110 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES SATELLITE COMMUNICATIONS Applications and Licenses General Application Filing...

A Geometry Based Infra-Structure for Computational Analysis and Design

NASA Technical Reports Server (NTRS)

Haimes, Robert

1998-01-01

The computational steps traditionally taken for most engineering analysis suites (computational fluid dynamics (CFD), structural analysis, heat transfer and etc.) are: (1) Surface Generation -- usually by employing a Computer Assisted Design (CAD) system; (2) Grid Generation -- preparing the volume for the simulation; (3) Flow Solver -- producing the results at the specified operational point; (4) Post-processing Visualization -- interactively attempting to understand the results. For structural analysis, integrated systems can be obtained from a number of commercial vendors. These vendors couple directly to a number of CAD systems and are executed from within the CAD Graphical User Interface (GUI). It should be noted that the structural analysis problem is more tractable than CFD; there are fewer mesh topologies used and the grids are not as fine (this problem space does not have the length scaling issues of fluids). For CFD, these steps have worked well in the past for simple steady-state simulations at the expense of much user interaction. The data was transmitted between phases via files. In most cases, the output from a CAD system could go to Initial Graphics Exchange Specification (IGES) or Standard Exchange Program (STEP) files. The output from Grid Generators and Solvers do not really have standards though there are a couple of file formats that can be used for a subset of the gridding (i.e. PLOT3D data formats). The user would have to patch up the data or translate from one format to another to move to the next step. Sometimes this could take days. Specifically the problems with this procedure are:(1) File based -- Information flows from one step to the next via data files with formats specified for that procedure. File standards, when they exist, are wholly inadequate. For example, geometry from CAD systems (transmitted via IGES files) is defined as disjoint surfaces and curves (as well as masses of other information of no interest for the Grid Generator). This is particularly onerous for modern CAD systems based on solid modeling. The part was a proper solid and in the translation to IGES has lost this important characteristic. STEP is another standard for CAD data that exists and supports the concept of a solid. The problem with STEP is that a solid modeling geometry kernel is required to query and manipulate the data within this type of file. (2) 'Good' Geometry. A bottleneck in getting results from a solver is the construction of proper geometry to be fed to the grid generator. With 'good' geometry a grid can be constructed in tens of minutes (even with a complex configuration) using unstructured techniques. Adroit multi-block methods are not far behind. This means that a million node steady-state solution can be computed on the order of hours (using current high performance computers) starting from this 'good' geometry. Unfortunately, the geometry usually transmitted from the CAD system is not 'good' in the grid generator sense. The grid generator needs smooth closed solid geometry. It can take a week (or more) of interaction with the CAD output (sometimes by hand) before the process can begin. One way Communication. (3) One-way Communication -- All information travels on from one phase to the next. This makes procedures like node adaptation difficult when attempting to add or move nodes that sit on bounding surfaces (when the actual surface data has been lost after the grid generation phase). Until this process can be automated, more complex problems such as multi-disciplinary analysis or using the above procedure for design becomes prohibitive. There is also no way to easily deal with this system in a modular manner. One can only replace the grid generator, for example, if the software reads and writes the same files. Instead of the serial approach to analysis as described above, CAPRI takes a geometry centric approach. This makes the actual geometry (not a discretized version) accessible to all phases of the analysis. The connection to the geometry is made through an Application Programming Interface (API) and NOT a file system. This API isolates the top-level applications (grid generators, solvers and visualization components) from the geometry engine. Also this allows the replacement of one geometry kernel with another, without effecting these top-level applications. For example, if UniGraphics is used as the CAD package then Parasolid (UG's own geometry engine) can be used for all geometric queries so that no solid geometry information is lost in a translation. This is much better than STEP because when the data is queried, the same software is executed as used in the CAD system. Therefore, one analyzes the exact part that is in the CAD system. CAPRI uses the same idea as the commercial structural analysis codes but does not specify control. Software components of the CAD system are used, but the analysis suite, not the CAD operator, specifies the control of the software session. This also means that the license issues (may be) minimized and individuals need not have to know how to operate a CAD system in order to run the suite.

7. This photographic copy of an engineering drawing displays the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. This photographic copy of an engineering drawing displays the building's floor plan in its 1995 arrangement, with rooms designated. California Institute of Technology, Jet Propulsion Laboratory, Facilities Engineering and Construction Office, "Addition to Weigh & Control Bldg. E-35, Demolition, Floor and Roof Plans," drawing no. E35/3-0, October 5, 1983. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: engineering drawings of structures at JPL Edwards Facility. Drawings on file at JPL Plant Engineering, Pasadena, California. - Jet Propulsion Laboratory Edwards Facility, Weigh & Control Building, Edwards Air Force Base, Boron, Kern County, CA

4. This photographic copy of an engineering drawing shows the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. This photographic copy of an engineering drawing shows the plan and details for Test Stand "G" and the placement of the vibrator. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: "Vibration Test Facility-Bldg E-72, Floor & Roof Plans, Sections, Details & Door Schedule," drawing no. E72/2-5, 21 May 1964. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: engineering drawings of structures at JPL Edwards Facility. Drawings on file at JPL Plant Engineering, Pasadena, California. - Jet Propulsion Laboratory Edwards Facility, Test Stand G, Edwards Air Force Base, Boron, Kern County, CA

STEP: What Is It and Should It Be Used for KSC's ISE/CEE Project in the Near Future?

NASA Technical Reports Server (NTRS)

Bareiss, Catherine C.

2000-01-01

The ability to exchange information between different engineering software (i.e, CAD, CAE, CAM) is necessary to aid in collaborative engineering. There are a number of different ways to accomplish this goal. One popular method is to transfer data via different file formats. However this method can lose data and becomes complex as more file formats are added. Another method is to use a standard protocol. STEP is one such standard. This paper gives an overview of STEP, provides a list of where to access more information, and develops guidelines to aid the reader in deciding if STEP is appropriate for his/her use.

MAGIC: Model and Graphic Information Converter

NASA Technical Reports Server (NTRS)

Herbert, W. C.

2009-01-01

MAGIC is a software tool capable of converting highly detailed 3D models from an open, standard format, VRML 2.0/97, into the proprietary DTS file format used by the Torque Game Engine from GarageGames. MAGIC is used to convert 3D simulations from authoritative sources into the data needed to run the simulations in NASA's Distributed Observer Network. The Distributed Observer Network (DON) is a simulation presentation tool built by NASA to facilitate the simulation sharing requirements of the Data Presentation and Visualization effort within the Constellation Program. DON is built on top of the Torque Game Engine (TGE) and has chosen TGE's Dynamix Three Space (DTS) file format to represent 3D objects within simulations.

SCOUSE: Semi-automated multi-COmponent Universal Spectral-line fitting Engine

NASA Astrophysics Data System (ADS)

Henshaw, J. D.; Longmore, S. N.; Kruijssen, J. M. D.; Davies, B.; Bally, J.; Barnes, A.; Battersby, C.; Burton, M.; Cunningham, M. R.; Dale, J. E.; Ginsburg, A.; Immer, K.; Jones, P. A.; Kendrew, S.; Mills, E. A. C.; Molinari, S.; Moore, T. J. T.; Ott, J.; Pillai, T.; Rathborne, J.; Schilke, P.; Schmiedeke, A.; Testi, L.; Walker, D.; Walsh, A.; Zhang, Q.

2016-01-01

The Semi-automated multi-COmponent Universal Spectral-line fitting Engine (SCOUSE) is a spectral line fitting algorithm that fits Gaussian files to spectral line emission. It identifies the spatial area over which to fit the data and generates a grid of spectral averaging areas (SAAs). The spatially averaged spectra are fitted according to user-provided tolerance levels, and the best fit is selected using the Akaike Information Criterion, which weights the chisq of a best-fitting solution according to the number of free-parameters. A more detailed inspection of the spectra can be performed to improve the fit through an iterative process, after which SCOUSE integrates the new solutions into the solution file.

Performance of the engineering analysis and data system 2 common file system

NASA Technical Reports Server (NTRS)

Debrunner, Linda S.

1993-01-01

The Engineering Analysis and Data System (EADS) was used from April 1986 to July 1993 to support large scale scientific and engineering computation (e.g. computational fluid dynamics) at Marshall Space Flight Center. The need for an updated system resulted in a RFP in June 1991, after which a contract was awarded to Cray Grumman. EADS II was installed in February 1993, and by July 1993 most users were migrated. EADS II is a network of heterogeneous computer systems supporting scientific and engineering applications. The Common File System (CFS) is a key component of this system. The CFS provides a seamless, integrated environment to the users of EADS II including both disk and tape storage. UniTree software is used to implement this hierarchical storage management system. The performance of the CFS suffered during the early months of the production system. Several of the performance problems were traced to software bugs which have been corrected. Other problems were associated with hardware. However, the use of NFS in UniTree UCFM software limits the performance of the system. The performance issues related to the CFS have led to a need to develop a greater understanding of the CFS organization. This paper will first describe the EADS II with emphasis on the CFS. Then, a discussion of mass storage systems will be presented, and methods of measuring the performance of the Common File System will be outlined. Finally, areas for further study will be identified and conclusions will be drawn.

RAID-2: Design and implementation of a large scale disk array controller

NASA Technical Reports Server (NTRS)

Katz, R. H.; Chen, P. M.; Drapeau, A. L.; Lee, E. K.; Lutz, K.; Miller, E. L.; Seshan, S.; Patterson, D. A.

1992-01-01

We describe the implementation of a large scale disk array controller and subsystem incorporating over 100 high performance 3.5 inch disk drives. It is designed to provide 40 MB/s sustained performance and 40 GB capacity in three 19 inch racks. The array controller forms an integral part of a file server that attaches to a Gb/s local area network. The controller implements a high bandwidth interconnect between an interleaved memory, an XOR calculation engine, the network interface (HIPPI), and the disk interfaces (SCSI). The system is now functionally operational, and we are tuning its performance. We review the design decisions, history, and lessons learned from this three year university implementation effort to construct a truly large scale system assembly.

Ground-water data, Green River basin, Wyoming

USGS Publications Warehouse

Zimmerman, Everett Alfred; Collier, K.R.

1985-01-01

Hydrologic and geologic data collected by the U.S. Geological Survey as part of energy-related projects in the Green River basin of Wyoming are compiled from the files of the Geological Survey and the Wyoming State Engineer as of 1977. The data include well and spring location, well depth, casing diameter, type of lifts, type of power, use of water, rock type of producing zone, owner, and discharge for more than 1,600 sites. Analyses for common chemical constituents, trace elements, and radioactive chemicals are tabulated as well as water temperature and specific conductance measurement data. Lithologic logs of more than 300 wells, test holes, and measured sections constitute much of this report. County maps at a scale of 1:500 ,000 show the locations. (USGS)

Video File - RS-25 Engine Test 2017-08-30

NASA Image and Video Library

2017-08-30

NASA engineers closed a summer of hot fire testing Aug. 30 for flight controllers on RS-25 engines that will help power the new Space Launch System (SLS) rocket being built to carry astronauts to deep-space destinations, including Mars. The 500-second hot fire an RS-25 engine flight controller unit on the A-1 Test Stand at Stennis Space Center near Bay St. Louis, Mississippi marked another step toward the nation’s return to human deep-space exploration missions.

VizieR Online Data Catalog: ExoMol line lists. XXIV. SiH (Yurchenko+, 2018)

NASA Astrophysics Data System (ADS)

Yurchenko, S. N.; Sinden, F.; Lodi, L.; Hill, C.; Gorman, M. N.; Tennyson, J.

2017-11-01

The data for each isotopologue are in two parts. The first, s_*.dat contain lists of rovibronic states. Each state is labelled with the total angular momentum, state degeneracy, life time, Zeeman Lande-g factor, total (+/-) and e/f parities, vibrational quantum number, projection of the electronic, spin and total angular momenta. Each state has a unique number, which is the number of the row in which it appears in the file. This number is the means by which the state is related to the second part of the data system, the transitions files. The transition files t_*.dat contain four columns: the reference number in the energy file of the upper state; that of the lower state; the Einstein A coefficient of the transition; the transition wavenumber. (8 data files).

45. Historic photo of Building 202 test cell interior, with ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

45. Historic photo of Building 202 test cell interior, with engine mounted on test stand A. Close-up view of a twenty-thousand-pound-thrust engine being tested in relation with combustion oscillation studies, October 12, 1960. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-54595. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

Performance of NACA Eight-Stage Axial-Flow Compressor Designed on the Basis of Airfoil Theory

DTIC Science & Technology

1944-08-01

TEE BASIS OF AIRFOIL THEORY By John T. Slnnette, Jr., Oscar W. Schey, and J. Austin King Aircraft Engine Research Laboratory Cleveland, Ohio FILE...efficiency can he designed by the proper application of airfoil theory. Aircraft Engine Research laboratory, Hational Advisory Committee for Aeronautlos...Basis of Airfoil Theory AUTHORS): Sinnette, John T.; Schey, Oscar W.; and others ORIGINATING AGENCY: Aircraft Engine Research Laboratory, Cleveland

Shaping abilities of two different engine-driven rotary nickel titanium systems or stainless steel balanced-force technique in mandibular molars.

PubMed

Matwychuk, Michael J; Bowles, Walter R; McClanahan, Scott B; Hodges, Jim S; Pesun, Igor J

2007-07-01

The purpose of this study was to compare apical transportation, working-length changes, and instrumentation time by using nickel-titanium (Ni-Ti) rotary file systems (crown-down method) or stainless steel hand files (balanced-force technique) in mesiobuccal canals of extracted mandibular molars. The curvature of each canal was determined and teeth placed into three equivalent groups. Group 1 was instrumented with Sequence (Brasseler USA, Savannah, GA) rotary files, group 2 with Liberator (Miltex Inc, York, PA) rotary files, and group 3 with Flex-R (Union Broach, New York, NY) files. Pre- and postoperative radiographs were superimposed to measure loss of working length and apical transportation as shown by changes in radius of curvature and the long-axis canal angle. Sequence rotary files, Liberator rotary files, and Flex-R hand files had similar effects on apical canal transportation and changes in working length, with no significant differences detected among the 3 groups. Hand instrumentation times were longer than with either Ni-Ti rotary group, whereas the rotary NiTi groups had a higher incidence of fracture.

78 FR 54247 - MIPC, LLC; Notice for Temporary Waiver of Filing and Reporting Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-03

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. OR13-33-000] MIPC, LLC; Notice for Temporary Waiver of Filing and Reporting Requirements Take notice that on August 22, 2013, MIPC, LLC filed a request for temporary waiver of the filing and reporting requirements of sections 6 and 20 of the Interstate Commerce Act, and Parts...

46 CFR Appendix A to Part 530 - Instructions for the Filing of Service Contracts

Code of Federal Regulations, 2011 CFR

2011-10-01

... file service contracts. BTCL will direct OIRM to provide approved filers with a log-on ID and password. Filers who wish a third party (publisher) to file their service contracts must so indicate on Form FMC-83... home page, http://www.fmc.gov. A. Registration, Log-on ID and Password To register for filing, a...

46 CFR Appendix A to Part 530 - Instructions for the Filing of Service Contracts

Code of Federal Regulations, 2010 CFR

2010-10-01

... file service contracts. BTCL will direct OIRM to provide approved filers with a log-on ID and password. Filers who wish a third party (publisher) to file their service contracts must so indicate on Form FMC-83... home page, http://www.fmc.gov. A. Registration, Log-on ID and Password To register for filing, a...

36 CFR 1222.20 - How are personal files defined and managed?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false How are personal files... Records § 1222.20 How are personal files defined and managed? (a) Personal files are defined in § 1220.18... Presidential Records Act of 1978 (44 U.S.C. 2201-2207) (see 36 CFR part 1270 of this chapter). (b) Personal...

Archive of Side Scan Sonar and Swath Bathymetry Data collected during USGS Cruise 10CCT02 Offshore of Petit Bois Island Including Petit Bois Pass, Gulf Islands National Seashore, Mississippi, March 2010

USGS Publications Warehouse

Pfeiffer, William R.; Flocks, James G.; DeWitt, Nancy T.; Forde, Arnell S.; Kelso, Kyle; Thompson, Phillip R.; Wiese, Dana S.

2011-01-01

In March of 2010, the U.S. Geological Survey (USGS) conducted geophysical surveys offshore of Petit Bois Island, Mississippi, and Dauphin Island, Alabama (fig. 1). These efforts were part of the USGS Gulf of Mexico Science Coordination partnership with the U.S. Army Corps of Engineers (USACE) to assist the Mississippi Coastal Improvements Program (MsCIP) and the Northern Gulf of Mexico (NGOM) Ecosystem Change and Hazards Susceptibility Project by mapping the shallow geologic stratigraphic framework of the Mississippi Barrier Island Complex. These geophysical surveys will provide the data necessary for scientists to define, interpret, and provide baseline bathymetry and seafloor habitat for this area and to aid scientists in predicting future geomorphological changes of the islands with respect to climate change, storm impact, and sea-level rise. Furthermore, these data will provide information for barrier island restoration, particularly in Camille Cut, and protection for the historical Fort Massachusetts on Ship Island, Mississippi. For more information please refer to http://ngom.usgs.gov/gomsc/mscip/index.html. This report serves as an archive of the processed swath bathymetry and side scan sonar data (SSS). Data products herein include gridded and interpolated surfaces, seabed backscatter images, and ASCII x,y,z data products for both swath bathymetry and side scan sonar imagery. Additional files include trackline maps, navigation files, GIS files, Field Activity Collection System (FACS) logs, and formal FGDC metadata. Scanned images of the handwritten and digital FACS logs are also provided as PDF files. Refer to the Acronyms page for expansion of acronyms and abbreviations used in this report.

CBCT Assessment of Root Dentine Removal by Gates-Glidden Drills and Two Engine-Driven Root Preparation Systems

PubMed Central

Harandi, Azade; Mohammadpour Maleki, Fatemeh; Moudi, Ehsan; Ehsani, Maryam; Khafri, Soraya

2017-01-01

Introduction: The aim of this study was to compare the dentine removing efficacy of Gates-Glidden drills with hand files, ProTaper and OneShape single-instrument system using cone-beam computed tomography (CBCT). Methods and Materials: A total of 39 extracted bifurcated maxillary first premolars were divided into 3 groups (n=13) and were prepared using either Gates-Glidden drills and hand instruments, ProTaper and OneShape systems. Pre- and post-instrumentation CBCT images were obtained. The dentin thickness of canals was measured at furcation, and 1 and 2 mm from the furcation area in buccal, palatal, mesial and distal walls. Data were analyzed using one-way ANOVA test. Tukey’s post hoc tests were used for two-by-two comparisons. Results: Gates-Glidden drills with hand files removed significantly more (P<0.001) dentine than the engine-driven systems in all canal walls (buccal, palatal, mesial and distal). There were no significant differences between OneShape and ProTaper rotary systems (P>0.05). Conclusion: The total cervical dentine removal during canal instrumentation was significantly less with engine-driven file systems compared to Gates-Glidden drills. There were no significant differences between residual dentine thicknesses left between the various canal walls. PMID:28179920

49 CFR 1002.2 - Filing fees.

Code of Federal Regulations, 2011 CFR

2011-10-01

... a major financial proceeding as defined at 49 CFR 1180.2(a) $5,500. (42) Notice of a joint project... temporary relief under 49 U.S.C. 10705 and 11102, and 49 CFR part 1147 for service inadequacy $250. (64) A... proceeding. (ii) In proceedings filed under the rail consolidation procedures at 49 CFR part 1180, the...

37 CFR 1.939 - Unauthorized papers in inter partes reexamination.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Unauthorized papers in inter... Unauthorized papers in inter partes reexamination. (a) If an unauthorized paper is filed by any party at any...) Unless otherwise authorized, no paper shall be filed prior to the initial Office action on the merits of...

77 FR 52315 - September 15, 2012 Deadline to File Requests for Inter Partes Reexamination Proceedings and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-29

... Notice of Failure to Comply Form AGENCY: United States Patent and Trademark Office, Commerce. ACTION... any deficiencies in the request via a Notice of Failure to Comply with Inter Partes Reexamination Request Filing Requirements (Notice of Failure to Comply) while providing sufficient time for requester to...

76 FR 21885 - BOST5 Hydroelectric Company, LLC; Notice of Application Tendered for Filing With the Commission...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-19

... (BOST5). e. Name of Project: Red River Lock & Dam No. 5 Hydroelectric Project. f. Location: The proposed project would be located at the existing Army Corps of Engineer's (Corps) Red River Lock & Dam No. 5 on the Red River, near the town of Ninock near the City of Shreveport, Louisiana. g. Filed Pursuant to...

75 FR 24972 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Cooperative...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-06

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--Cooperative Research Group on High Efficiency Dilute Gasoline Engine II Notice is... Research Group on High-Efficiency Dilute Gasoline Engine II, (``HEDGE II'') has filed written notifications...

76 FR 9811 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Cooperative...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-22

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--Cooperative Research Group on High-Efficiency Dilute Gasoline Engine II Notice is... Research Group on High-Efficiency Dilute Gasoline Engine II (``HEDGE II'') has filed written notifications...

75 FR 62569 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Cooperative...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-12

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--Cooperative Research Group on High Efficiency Dilute Gasoline Engine II Notice is...--Cooperative Research Group on High-Efficiency Dilute Gasoline Engine II, (``HEDGE II'') has filed written...

75 FR 4423 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Cooperative...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-27

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--Cooperative Research Group on High Efficiency Dilute Gasoline Engine II Notice is...--Cooperative Research Group on High-Efficiency Dilute Gasoline Engine II, (``HEDGE II'') has filed written...

75 FR 14192 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Cooperative...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-24

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--Cooperative Research Group on High-Efficiency Dilute Gasoline Engine II Notice is...--Cooperative Research Group on High-Efficiency Dilute Gasoline Engine II (``HEDGE II'') has filed written...

75 FR 79024 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Cooperative...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-17

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--Cooperative Research Group on High-Efficiency Dilute Gasoline Engine II Notice is... Research Group on High-Efficiency Dilute Gasoline Engine II (``HEDGE II'') has filed written notifications...

78 FR 20141 - Notice Pursuant to the National Cooperative Research and Production Act of 1993 -- American...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-03

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993 -- American Society of Mechanical Engineers Notice is hereby given that, on March 5....C. 4301 et seq. (``the Act''), the American Society of Mechanical Engineers (``ASME'') has filed...

78 FR 58558 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-American Society...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-24

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--American Society of Mechanical Engineers Notice is hereby given that, on August 20....C. 4301 et seq. (``the Act''), the American Society of Mechanical Engineers (``ASME'') has filed...

76 FR 80406 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-American Society...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-23

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--American Society of Mechanical Engineers Notice is hereby given that, on December 6....C. 4301 et seq. (``the Act''), American Society of Mechanical Engineers (``ASME'') has filed written...

76 FR 27351 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-American Society...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-11

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--American Society of Mechanical Engineers Notice is hereby given that, on April 12....C. 4301 et seq. (``the Act''), American Society Of Mechanical Engineers (``ASME'') has filed written...

75 FR 70031 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-American Society...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-16

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--American Society of Mechanical Engineers Notice is hereby given that, on October 14....C. 4301 et seq. (``the Act''), American Society of Mechanical Engineers (``ASME'') has filed written...

76 FR 52014 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-American Society...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-19

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--American Society of Mechanical Engineers Notice is hereby given that, on July 25....C. 4301 et seq. (``the Act''), American Society of Mechanical Engineers (``ASME'') has filed written...

76 FR 6497 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-American Society...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-04

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--American Society of Mechanical Engineers Notice is hereby given that, on January 10....C. 4301 et seq. (``the Act''), American Society of Mechanical Engineers (``ASME'') has filed written...

75 FR 45156 - Notice Pursuant to the National Cooperative Research and Production Act of 1993; American Society...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-02

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993; American Society of Mechanical Engineers Notice is hereby given that, on June 28....C. 4301 et seq. (``the Act''), the American Society of Mechanical Engineers (``ASME'') has filed...

77 FR 31041 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-American Society...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-24

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993--American Society of Mechanical Engineers Notice is hereby given that, on April 27....C. 4301 et seq. (``the Act''), the American Society of Mechanical Engineers (``ASME'') has filed...

75 FR 14191 - Notice Pursuant to The National Cooperative Research and Production Act of 1993-American Society...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-24

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to The National Cooperative Research and Production Act of 1993--American Society of Mechanical Engineers Notice is hereby given that, on February 25....C. 4301 et seq.. (``the Act''), the American Society of Mechanical Engineers (``ASME'') has filed...

77 FR 58412 - Notice Pursuant to the National Cooperative Research and Production Act of 1993; American Society...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-20

... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and Production Act of 1993; American Society of Mechanical Engineers Notice is hereby given that, on August 27....C. 4301 et seq. (``the Act''), the American Society of Mechanical Engineers (``ASME'') has filed...

51. Historic photo of Building 202 test cell interior, with ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

51. Historic photo of Building 202 test cell interior, with longablative rocket engine mounted on test stand A, May 18, 1967. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-66-4084. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

46. Historic photo of Building 202 test cell interior, detail ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

46. Historic photo of Building 202 test cell interior, detail of test stand A with engine severely damaged during testing, September 7, 1961. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-57837. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

34. Historic photo of Building 202 test cell with damage ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

34. Historic photo of Building 202 test cell with damage from fire or explosion during rocket engine testing, May 17, 1958. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-47965. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

54. Historic photo of Building 202 test cell interior, with ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

54. Historic photo of Building 202 test cell interior, with engine mounted on test stand A, September 13, 1967. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-67-3274. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

12. Historic view of Building 100 control room, showing television ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. Historic view of Building 100 control room, showing television monitoring of tests and personnel operating rocket engine test controls. May 27, 1957. On file at NASA Plumbrook Research Facility, Sandusky, Ohio. NASA photo number C-45021. - Rocket Engine Testing Facility, GRC Building No. 100, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

47. Historic photo of Building 202 test cell interior, test ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

47. Historic photo of Building 202 test cell interior, test stand A with technician working on zone injector engine, June 3, 1996. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-66-2396. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

52. Historic photo of Building 202 test cell interior, with ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

52. Historic photo of Building 202 test cell interior, with engine mounted on test stand A, May 18, 1967 On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-67-1740. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

37. Historic photo of Building 202 test cell interior, with ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

37. Historic photo of Building 202 test cell interior, with damage related to hydrogen fire during rocket engine testing, April 25, 1959. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-50473. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

75 FR 77904 - In the Matter of Certain Turbomachinery Blades, Engines and Components Thereof; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-14

... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-751] In the Matter of Certain Turbomachinery Blades, Engines and Components Thereof; Notice of Investigation AGENCY: U.S. International Trade... that a complaint was filed with the U.S. International Trade Commission on November 5, 2010, under...

Root canal shaping with manual stainless steel files and rotary Ni-Ti files performed by students.

PubMed

Sonntag, D; Guntermann, A; Kim, S K; Stachniss, V

2003-04-01

To investigate root canal shaping with manual stainless steel files and rotary Ni-Ti files by students. Two hundred and ten simulated root canals with the same geometrical shape and size in acrylic resin blocks were prepared by 21 undergraduate dental students with manual stainless steel files using a stepback technique or with rotary Ni-Ti files in crown-down technique. Preparation length, canal shape, incidence of fracture and preparation time were investigated. Zips and elbows occurred significantly (P < 0.001) less frequently with rotary than with manual preparation. The correct preparation length was achieved significantly (P < 0.05) more often with rotary Ni-Ti files than with manual stainless steel files. Fractures occurred significantly (P < 0.05) less frequently with hand instrumentation. The mean time required for manual preparation was significantly (P < 0.001) longer than that required for rotary preparation. Prior experience with a hand preparation technique was not reflected in an improved quality of the subsequent engine-driven preparation. Inexperienced operators achieved better canal preparations with rotary Ni-Ti instruments than with manual stainless steel files. However, rotary preparation was associated with significantly more fractures.

NASA Goddard Space Flight Center

NASA Technical Reports Server (NTRS)

Carter, David; Wetzel, Scott

2000-01-01

The NASA SLR Operational Center is responsible for: 1) NASA SLR network control, sustaining engineering, and logistics; 2) ILRS mission operations; and 3) ILRS and NASA SLR data operations. NASA SLR network control and sustaining engineering tasks include technical support, daily system performance monitoring, system scheduling, operator training, station status reporting, system relocation, logistics and support of the ILRS Networks and Engineering Working Group. These activities ensure the NASA SLR systems are meeting ILRS and NASA mission support requirements. ILRS mission operations tasks include mission planning, mission analysis, mission coordination, development of mission support plans, and support of the ILRS Missions Working Group. These activities ensure than new mission and campaign requirements are coordinated with the ILRS. Global Normal Points (NP) data, NASA SLR FullRate (FR) data, and satellite predictions are managed as part of data operations. Part of this operation includes supporting the ILRS Data Formats and Procedures Working Group. Global NP data operations consist of receipt, format and data integrity verification, archiving and merging. This activity culminates in the daily electronic transmission of NP files to the CDDIS. Currently of all these functions are automated. However, to ensure the timely and accurate flow of data, regular monitoring and maintenance of the operational software systems, computer systems and computer networking are performed. Tracking statistics between the stations and the data centers are compared periodically to eliminate lost data. Future activities in this area include sub-daily (i.e., hourly) NP data management, more stringent data integrity tests, and automatic station notification of format and data integrity issues.

bioalcidae, samjs and vcffilterjs: object-oriented formatters and filters for bioinformatics files.

PubMed

Lindenbaum, Pierre; Redon, Richard

2018-04-01

Reformatting and filtering bioinformatics files are common tasks for bioinformaticians. Standard Linux tools and specific programs are usually used to perform such tasks but there is still a gap between using these tools and the programming interface of some existing libraries. In this study, we developed a set of tools namely bioalcidae, samjs and vcffilterjs that reformat or filter files using a JavaScript engine or a pure java expression and taking advantage of the java API for high-throughput sequencing data (htsjdk). https://github.com/lindenb/jvarkit. pierre.lindenbaum@univ-nantes.fr.

Lapin Data Interchange Among Database, Analysis and Display Programs Using XML-Based Text Files

NASA Technical Reports Server (NTRS)

2004-01-01

The purpose was to investigate and evaluate the interchange of application- specific data among multiple programs each carrying out part of the analysis and design task. This has been carried out previously by creating a custom program to read data produced by one application and then write that data to a file whose format is specific to the second application that needs all or part of that data. In this investigation, data of interest is described using the XML markup language that allows the data to be stored in a text-string. Software to transform output data of a task into an XML-string and software to read an XML string and extract all or a portion of the data needed for another application is used to link two independent applications together as part of an overall design effort. This approach was initially used with a standard analysis program, Lapin, along with standard applications a standard spreadsheet program, a relational database program, and a conventional dialog and display program to demonstrate the successful sharing of data among independent programs. See Engineering Analysis Using a Web-Based Protocol by J.D. Schoeffler and R.W. Claus, NASA TM-2002-211981, October 2002. Most of the effort beyond that demonstration has been concentrated on the inclusion of more complex display programs. Specifically, a custom-written windowing program organized around dialogs to control the interactions have been combined with an independent CAD program (Open Cascade) that supports sophisticated display of CAD elements such as lines, spline curves, and surfaces and turbine-blade data produced by an independent blade design program (UD0300).

47 CFR 63.20 - Electronic filing, copies required; fees; and filing periods for international service providers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... homepage. For information on electronic filing requirements, see part 1, §§ 1.1000 through 1.10018 of this chapter and the IBFS homepage at http://www.fcc.gov/ibfs. Each application shall be accompanied by the fee...

PCACE-Personal-Computer-Aided Cabling Engineering

NASA Technical Reports Server (NTRS)

Billitti, Joseph W.

1987-01-01

PCACE computer program developed to provide inexpensive, interactive system for learning and using engineering approach to interconnection systems. Basically database system that stores information as files of individual connectors and handles wiring information in circuit groups stored as records. Directly emulates typical manual engineering methods of handling data, thus making interface between user and program very natural. Apple version written in P-Code Pascal and IBM PC version of PCACE written in TURBO Pascal 3.0

Cleaning of endodontic files, Part I: The effect of bioburden on the sterilization of endodontic files.

PubMed

Johnson, M A; Primack, P D; Loushine, R J; Craft, D W

1997-01-01

Ninety-two new endodontic files were randomly assigned to five groups with varying parameters of contamination, cleaning method, and sterilization (steam or chemical). Files were instrumented in bovine teeth to accumulate debris and a known contaminant, Bacillus stearothermophilus. Positive controls produced growth on both T-soy agar plates and in T-soy broth. Negative controls and experimental files (some with heavy debris) failed to produce growth. The results showed that there was no significant difference between contaminated files that were not cleaned before sterilization and contaminated files that were cleaned before sterilization. Bioburden present on endodontic files does not appear to affect the sterilization process.

PATSTAGS - PATRAN-STAGSC-1 TRANSLATOR

NASA Technical Reports Server (NTRS)

Otte, N. E.

1994-01-01

PATSTAGS translates PATRAN finite model data into STAGS (Structural Analysis of General Shells) input records to be used for engineering analysis. The program reads data from a PATRAN neutral file and writes STAGS input records into a STAGS input file and a UPRESS data file. It is able to support translations of nodal constraints, nodal, element, force and pressure data. PATSTAGS uses three files: the PATRAN neutral file to be translated, a STAGS input file and a STAGS pressure data file. The user provides the names for the neutral file and the desired names of the STAGS files to be created. The pressure data file contains the element live pressure data used in the STAGS subroutine UPRESS. PATSTAGS is written in FORTRAN 77 for DEC VAX series computers running VMS. The main memory requirement for execution is approximately 790K of virtual memory. Output blocks can be modified to output the data in any format desired, allowing the program to be used to translate model data to analysis codes other than STAGSC-1 (HQN-10967). This program is available in DEC VAX BACKUP format on a 9-track magnetic tape or TK50 tape cartridge. Documentation is included in the price of the program. PATSTAGS was developed in 1990. DEC, VAX, TK50 and VMS are trademarks of Digital Equipment Corporation.

This photocopy of an engineering drawing shows the BakerPerkins 150gallon ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

This photocopy of an engineering drawing shows the Baker-Perkins 150-gallon mixer installation in the building. Austin, Field & Fry, Architects Engineers, 22311 West Third Street, Los Angeles 57, California: Edwards Test Station Complex, Jet Propulsion Laboratory, California Institute of Technology, Edwards Air Force Base, Edwards, California: "150 Gallon Mixer System Bldg. E-34, Plans, Sections & Details," drawing no. E34/6-0, 10 July 1963. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: engineering drawings of structures at JPL Edwards Facility. Drawings on file at JPL Plant Engineering, Pasadena, California - Jet Propulsion Laboratory Edwards Facility, Mixer, Edwards Air Force Base, Boron, Kern County, CA

This photographic copy of an engineering drawing shows floor plans, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

This photographic copy of an engineering drawing shows floor plans, sections and elevations of Building E-86, with details typical of the steel frame and "Transite" building construction at JPL Edwards Facility. California Institute of Technology, Jet Propulsion Laboratory, Facilities Engineering and Construction Office: "Casting & Curing, Building E-86, Floor Plan, Elevations & Section," drawing no. E86/6, 25 February 1977. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: engineering drawings of structures at JPL Edwards Facility. Drawings on file at JPL Plant Engineering, Pasadena, California - Jet Propulsion Laboratory Edwards Facility, Casting & Curing Building, Edwards Air Force Base, Boron, Kern County, CA

12 CFR Appendix G to Part 360 - Deposit-Customer Join File Structure

Code of Federal Regulations, 2010 CFR

2010-01-01

..._Code Relationship CodeThe code indicating how the customer is related to the account. Possible values... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Deposit-Customer Join File Structure G Appendix... GENERAL POLICY RESOLUTION AND RECEIVERSHIP RULES Pt. 360, App. G Appendix G to Part 360—Deposit-Customer...

29 CFR 1614.604 - Filing and computation of time.

Code of Federal Regulations, 2010 CFR

2010-07-01

... within five days of the expiration of the applicable filing period. (c) The time limits in this part are subject to waiver, estoppel and equitable tolling. (d) The first day counted shall be the day after the.... (a) All time periods in this part that are stated in terms of days are calendar days unless otherwise...

12 CFR 268.604 - Filing and computation of time.

Code of Federal Regulations, 2010 CFR

2010-01-01

... mail within five days of the expiration of the applicable filing period. (c) The time limits in this part are subject to waiver, estoppel and equitable tolling. (d) The first day counted shall be the day... computation of time. (a) All time periods in this part that are stated in terms of days are calendar days...

15 CFR Appendix C to Part 30 - Summary of Exemptions and Exclusions From EEI Filing

Code of Federal Regulations, 2010 CFR

2010-01-01

..., medicinal and surgical supplies, food stores, slop chest articles, and saloon stores or supplies for use or....37(o)). 16. Shipments of aircraft parts and equipment; food, saloon, slop chest, and related stores... evidence of financial claims. The EEI must be filed for unissued bank notes and securities and coins not in...

Sensitivity-Uncertainty Based Nuclear Criticality Safety Validation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Forrest B.

2016-09-20

These are slides from a seminar given to the University of Mexico Nuclear Engineering Department. Whisper is a statistical analysis package developed to support nuclear criticality safety validation. It uses the sensitivity profile data for an application as computed by MCNP6 along with covariance files for the nuclear data to determine a baseline upper-subcritical-limit for the application. Whisper and its associated benchmark files are developed and maintained as part of MCNP6, and will be distributed with all future releases of MCNP6. Although sensitivity-uncertainty methods for NCS validation have been under development for 20 years, continuous-energy Monte Carlo codes such asmore » MCNP could not determine the required adjoint-weighted tallies for sensitivity profiles. The recent introduction of the iterated fission probability method into MCNP led to the rapid development of sensitivity analysis capabilities for MCNP6 and the development of Whisper. Sensitivity-uncertainty based methods represent the future for NCS validation – making full use of today’s computer power to codify past approaches based largely on expert judgment. Validation results are defensible, auditable, and repeatable as needed with different assumptions and process models. The new methods can supplement, support, and extend traditional validation approaches.« less

Canal wall planning by engine-driven nickel-titanium instruments, compared with stainless-steel hand instrumentation.

PubMed

Tucker, D M; Wenckus, C S; Bentkover, S K

1997-03-01

Twenty-two mesial roots of extracted human mandibular molars were divided into two groups based on root curvature and length. The mesiolingual canals were instrumented using either Flexofiles in a step-back anticurvature filing method, or they were instrumented with engine-driven 0.02 taper nickel-titanium files. Ground sections were prepared at 1-, 2.5-, and 5-mm levels from the working length. The mesiobuccal canal was used as an uninstrumented control for predentin character. Digitizing software was used to calculate the instrumented portion as a percentage of the total canal perimeter. The results indicated no significant difference in overall canal wall planning between the two groups and no significant difference at each of the three levels.

12 CFR Appendix C to Part 360 - Deposit File Structure

Code of Federal Regulations, 2011 CFR

2011-01-01

... structure for the data file to provide deposit data to the FDIC. If data or information are not maintained... covered institution's understanding of its customers and the data maintained around deposit accounts... complete its insurance determination process, it may add this information to the end of this data file...

76 FR 7836 - Rich, Brian R.; Notice of Filing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-11

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ID-6467-000] Rich, Brian R.; Notice of Filing Take notice that on December 31, 2010, Brian R. Rich submitted for filing, an application for authority to hold interlocking positions, pursuant to part 45 of Title 18 of the Code of...

47 CFR 61.17 - Method of filing applications for special permission.

Code of Federal Regulations, 2010 CFR

2010-10-01

... special permission. (a) An application for special permission filed electronically must be addressed to... permission applications requiring fees as set forth in part 1, subpart G of this chapter, issuing carriers... 47 Telecommunication 3 2010-10-01 2010-10-01 false Method of filing applications for special...

Does Mood Change How We Organize Digital Files?

ERIC Educational Resources Information Center

Massey, Charlotte

2017-01-01

Retrieving files from one's computer is done daily and is an essential part of completing most tasks at work, yet surprisingly little research has examined the ways that people structure and organize their files. Management of personal digital information is a challenging task that users approach idiosyncratically. Large individual differences…

MissileLab User’s Guide

DTIC Science & Technology

2009-02-01

extension) that contain the airframe geometry specific to a single configuration. Results from a MissileLab run will be stored in a directory...re)created and contain all APE results and associated input files. C. Background In the early stages of missile system design, it is necessary to...Copying the AeroEngine Files After installation, the subdirectories in the “AeroEngine” directory contain contact information on how to obtain valid

Surfing the Web for Science: Early Data on the Users and Uses of The Why Files.

ERIC Educational Resources Information Center

Eveland, William P., Jr.; Dunwoody, Sharon

1998-01-01

This brief offers an initial look at one science site on the World Wide Web (The Why Files: http://whyfiles.news.wise.edu) in order to consider the educational potential of this technology. The long-term goal of the studies of this site is to understand how the World Wide Web can be used to enhance science, mathematics, engineering, and technology…

On the Use of CAD-Native Predicates and Geometry in Surface Meshing

NASA Technical Reports Server (NTRS)

Aftosmis, M. J.

1999-01-01

Several paradigms for accessing CAD geometry during surface meshing for CFD are discussed. File translation, inconsistent geometry engines and non-native point construction are all identified as sources of non-robustness. The paper argues in favor of accessing CAD parts and assemblies in their native format, without translation, and for the use of CAD-native predicates and constructors in surface mesh generation. The discussion also emphasizes the importance of examining the computational requirements for exact evaluation of triangulation predicates during surface meshing. The native approach is demonstrated through an algorithm for the generation of closed manifold surface triangulations from CAD geometry. CAD parts and assemblies are used in their native format, and a part's native geometry engine is accessed through a modeler-independent application programming interface (API). In seeking a robust and fully automated procedure, the algorithm is based on a new physical space manifold triangulation technique specially developed to avoid robustness issues associated with poorly conditioned mappings. In addition, this approach avoids the usual ambiguities associated with floating-point predicate evaluation on constructed coordinate geometry in a mapped space. The technique is incremental, so that each new site improves the triangulation by some well defined quality measure. The algorithm terminates after achieving a prespecified measure of mesh quality and produces a triangulation such that no angle is less than a given angle bound, a or greater than pi - 2alpha. This result also sets bounds on the maximum vertex degree, triangle aspect-ratio and maximum stretching rate for the triangulation. In addition to the output triangulations for a variety of CAD parts, the discussion presents related theoretical results which assert the existence of such an angle bound, and demonstrate that maximum bounds of between 25 deg and 30 deg may be achieved in practice.

Creation of a ceramics handbook

NASA Technical Reports Server (NTRS)

Craft, W. J.

1976-01-01

A group of common ceramic materials (alumina, magnesium oxide, silicon nitride, and silicon carbide) were characterized through literature searches according to their physical properties. The files used were the NASA file, DDC/GRA File, Engineering Index File and standard library searches. The results of these searches are arranged by material properties including mechanical, electrical, electromagnetic, where applicable, and fracture; and the entries are arranged in chronological order by candidate. A list, by author, follows where tabular information including charts and figures of results is given along with a brief statement of the results and conclusions. In both cases, information on the independent variables along with their range is given. The results of an extensive industry survey asking for names of other candidates on which information is lacking and also what type of service, if any, is desired in keeping a current information file on general ceramic materials.

Video File - NASA on a Roll Testing Space Launch System Flight Engines

NASA Image and Video Library

2017-08-09

Just two weeks after conducting another in a series of tests on new RS-25 rocket engine flight controllers for NASA’s Space Launch System (SLS) rocket, engineers at NASA’s Stennis Space Center in Mississippi completed one more hot-fire test of a flight controller on August 9, 2017. With the hot fire, NASA has moved a step closer in completing testing on the four RS-25 engines which will power the first integrated flight of the SLS rocket and Orion capsule known as Exploration Mission 1.

77 FR 46615 - Changes To Implement Miscellaneous Post Patent Provisions of the Leahy-Smith America Invents Act

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-06

...The Leahy-Smith America Invents Act (AIA) expands the scope of information that any party may cite in a patent file to include written statements of a patent owner filed in a proceeding before a Federal court or the United States Patent and Trademark Office (Office) regarding the scope of any claim of the patent, and provides for how such information may be considered in ex parte reexamination, inter partes review, and post grant review. The AIA also provides for an estoppel that may attach with respect to the filing of an ex parte reexamination request subsequent to a final written decision in an inter partes review or post grant review proceeding. The Office is revising the rules of practice to implement these post-patent provisions, as well as other miscellaneous provisions, of the AIA.

77 FR 71846 - In the Matter of Encore Clean Energy, Inc., Energy & Engine Technology Corp., Equity Media...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-04

... SECURITIES AND EXCHANGE COMMISSION [ File No. 500-1] In the Matter of Encore Clean Energy, Inc., Energy & Engine Technology Corp., Equity Media Holdings Corporation, eTotalSource, Inc., Extensions, Inc., Firepond, Inc., and GNC Energy Corporation; Order of Suspension of Trading November 29, 2012. It appears to...

75 FR 79024 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ODVA, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-17

... Precision Co., Ltd., Seoul, Republic of Korea; Monaghan Engineering, Inc., Dripping Springs, TX; Samsung..., Shihung-Shi, Republic of Korea, have been added as parties to this venture. Also, Schweitzer Engineering.... Brink, Director of Civil Enforcement, Antitrust Division. [FR Doc. 2010-31593 Filed 12-16-10; 8:45 am...

44. Historic photo of interior of Building 202 test cell, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

44. Historic photo of interior of Building 202 test cell, showing rocket engine on test stand and camera set up for filming tests, September 1960. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-54464. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

39. Historic photo of Building 202 test cell exterior, showing ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

39. Historic photo of Building 202 test cell exterior, showing fiberglass cladding blown out by hydrogen fire during rocket engine testing, April 27, 1959. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-50472. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

11. Historic view of Building 100 control room, showing personnel ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. Historic view of Building 100 control room, showing personnel operating rocket engine test controls and observer watching activity from observation room. May 27, 1957. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-45020. - Rocket Engine Testing Facility, GRC Building No. 100, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

35. Historic photo of Building 202 test stand with damage ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

35. Historic photo of Building 202 test stand with damage to twenty-thousand-pound-thrust rocket engine related to failure during testing, September 16, 1958. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-48704. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

57. Historic photo of interior of test cell at Building ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

57. Historic photo of interior of test cell at Building 202, showing test stand A with engine and D.T. support ring, February 24, 1969. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-69--3187. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

76 FR 65749 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-TAI and Southwest...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-24

... tools research and development by organizing and implementing joint engineering and scientific research... components in the engineering and scientific areas of electronic systems, hardware design, packaging and... Civil Enforcement, Antitrust Division. [FR Doc. 2011-27114 Filed 10-21-11; 8:45 am] BILLING CODE 4410-11...

78 FR 33866 - Self-Regulatory Organizations; NYSE MKT LLC; Notice of Filing and Immediate Effectiveness of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-05

... Amending NYSE MKT Rule 980NY, To Remove Provisions Governing How the Complex Matching Engine Handles Electronic Complex Orders That Contain a Stock Leg May 30, 2013. Pursuant to Section 19(b)(1)\\1\\ of the... governing how the Complex Matching Engine (``CME'') handles Electronic Complex Orders that contain a stock...

Common Database Interface for Heterogeneous Software Engineering Tools.

DTIC Science & Technology

1987-12-01

SUB-GROUP Database Management Systems ;Programming(Comuters); 1e 05 Computer Files;Information Transfer;Interfaces; 19. ABSTRACT (Continue on reverse...Air Force Institute of Technology Air University In Partial Fulfillment of the Requirements for the Degree of Master of Science in Information Systems ...Literature ..... 8 System 690 Configuration ......... 8 Database Functionis ............ 14 Software Engineering Environments ... 14 Data Manager

Re-engineering the Multimission Command System at the Jet Propulsion Laboratory

NASA Technical Reports Server (NTRS)

Alexander, Scott; Biesiadecki, Jeff; Cox, Nagin; Murphy, Susan C.; Reeve, Tim

1994-01-01

The Operations Engineering Lab (OEL) at JPL has developed the multimission command system as part of JPL's Advanced Multimission Operations System. The command system provides an advanced multimission environment for secure, concurrent commanding of multiple spacecraft. The command functions include real-time command generation, command translation and radiation, status reporting, some remote control of Deep Space Network antenna functions, and command file management. The mission-independent architecture has allowed easy adaptation to new flight projects and the system currently supports all JPL planetary missions (Voyager, Galileo, Magellan, Ulysses, Mars Pathfinder, and CASSINI). This paper will discuss the design and implementation of the command software, especially trade-offs and lessons learned from practical operational use. The lessons learned have resulted in a re-engineering of the command system, especially in its user interface and new automation capabilities. The redesign has allowed streamlining of command operations with significant improvements in productivity and ease of use. In addition, the new system has provided a command capability that works equally well for real-time operations and within a spacecraft testbed. This paper will also discuss new development work including a multimission command database toolkit, a universal command translator for sequencing and real-time commands, and incorporation of telecommand capabilities for new missions.

Engineering description of the ascent/descent bet product

NASA Technical Reports Server (NTRS)

Seacord, A. W., II

1986-01-01

The Ascent/Descent output product is produced in the OPIP routine from three files which constitute its input. One of these, OPIP.IN, contains mission specific parameters. Meteorological data, such as atmospheric wind velocities, temperatures, and density, are obtained from the second file, the Corrected Meteorological Data File (METDATA). The third file is the TRJATTDATA file which contains the time-tagged state vectors that combine trajectory information from the Best Estimate of Trajectory (BET) filter, LBRET5, and Best Estimate of Attitude (BEA) derived from IMU telemetry. Each term in the two output data files (BETDATA and the Navigation Block, or NAVBLK) are defined. The description of the BETDATA file includes an outline of the algorithm used to calculate each term. To facilitate describing the algorithms, a nomenclature is defined. The description of the nomenclature includes a definition of the coordinate systems used. The NAVBLK file contains navigation input parameters. Each term in NAVBLK is defined and its source is listed. The production of NAVBLK requires only two computational algorithms. These two algorithms, which compute the terms DELTA and RSUBO, are described. Finally, the distribution of data in the NAVBLK records is listed.

Data indicating temperature response of Ti-6Al-4V thin-walled structure during its additive manufacture via Laser Engineered Net Shaping.

PubMed

Marshall, Garrett J; Thompson, Scott M; Shamsaei, Nima

2016-06-01

An OPTOMEC Laser Engineered Net Shaping (LENS(™)) 750 system was retrofitted with a melt pool pyrometer and in-chamber infrared (IR) camera for nondestructive thermal inspection of the blown-powder, direct laser deposition (DLD) process. Data indicative of temperature and heat transfer within the melt pool and heat affected zone atop a thin-walled structure of Ti-6Al-4V during its additive manufacture are provided. Melt pool temperature data were collected via the dual-wavelength pyrometer while the dynamic, bulk part temperature distribution was collected using the IR camera. Such data are provided in Comma Separated Values (CSV) file format, containing a 752×480 matrix and a 320×240 matrix of temperatures corresponding to individual pixels of the pyrometer and IR camera, respectively. The IR camera and pyrometer temperature data are provided in blackbody-calibrated, raw forms. Provided thermal data can aid in generating and refining process-property-performance relationships between laser manufacturing and its fabricated materials.

Data indicating temperature response of Ti–6Al–4V thin-walled structure during its additive manufacture via Laser Engineered Net Shaping

PubMed Central

Marshall, Garrett J.; Thompson, Scott M.; Shamsaei, Nima

2016-01-01

An OPTOMEC Laser Engineered Net Shaping (LENS™) 750 system was retrofitted with a melt pool pyrometer and in-chamber infrared (IR) camera for nondestructive thermal inspection of the blown-powder, direct laser deposition (DLD) process. Data indicative of temperature and heat transfer within the melt pool and heat affected zone atop a thin-walled structure of Ti–6Al–4V during its additive manufacture are provided. Melt pool temperature data were collected via the dual-wavelength pyrometer while the dynamic, bulk part temperature distribution was collected using the IR camera. Such data are provided in Comma Separated Values (CSV) file format, containing a 752×480 matrix and a 320×240 matrix of temperatures corresponding to individual pixels of the pyrometer and IR camera, respectively. The IR camera and pyrometer temperature data are provided in blackbody-calibrated, raw forms. Provided thermal data can aid in generating and refining process-property-performance relationships between laser manufacturing and its fabricated materials. PMID:27054180

Development of a Genetically Engineered Venezuelan Equine Encephalitis Virus Vaccine

DTIC Science & Technology

1988-12-20

immunization, the horses will be returned to the large animal biocontainment facility to be challenged with equine virulent VEE virus. The animals will be...AD £IT FiLE C p DEVELOPMENT OF A GENETICALLY ENGINEERED VENEZUELAN EQUINE ENCEPHALITIS VIRUS VACCINE ANNUAL REPORT to DENNIS W. TRENT 0DECEMBER 20...Engineered Venezuelan Equine Encephalitis Virus Vaccine 12. PERSONAL AUTHOR(S) Dennis W. Trent 13a. TYPE OF REPORT 13b. TIME COVERED 14. DATE OF REPORT

42 CFR 423.510 - Termination of contract by the Part D sponsor.

Code of Federal Regulations, 2011 CFR

2011-10-01

... member of the board of directors or board of trustees of the entity, if the organization is organized as a corporation. (f) Timely transfer of data and files. If a contract is terminated under paragraph (a) of this section, the Part D plan sponsor must ensure the timely transfer of any data or files. [70 FR...

42 CFR 423.510 - Termination of contract by the Part D sponsor.

Code of Federal Regulations, 2013 CFR

2013-10-01

... member of the board of directors or board of trustees of the entity, if the organization is organized as a corporation. (f) Timely transfer of data and files. If a contract is terminated under paragraph (a) of this section, the Part D plan sponsor must ensure the timely transfer of any data or files. [70 FR...

20 CFR 217.10 - Application filed after death.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Application filed after death. 217.10 Section... APPLICATION FOR ANNUITY OR LUMP SUM Applications § 217.10 Application filed after death. (a) A survivor... expenses dies before applying for the lump-sum death payment under part 234 of this chapter. The...

78 FR 65639 - Notice of Filing; Wyrsch, Martha B.

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-01

... Filing; Wyrsch, Martha B. Take notice that on October 25, 2013, Martha B. Wyrsch submitted for filing, an application for authority to hold interlocking positions, pursuant to section 305(b) of the Federal Power Act (FPA), 16 U.S.C. 825d(b) and Part 45 of the Federal Energy Regulatory Commission's (Commission) Rules...

15 CFR 2.4 - Procedure for filing claims.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Procedure for filing claims. 2.4 Section 2.4 Commerce and Foreign Trade Office of the Secretary of Commerce PROCEDURES FOR HANDLING AND... (28 CFR Part 14). (b) Claims shall be filed with the Assistant General Counsel for Finance and...

12 CFR Appendix C to Part 360 - Deposit File Structure

Code of Federal Regulations, 2013 CFR

2013-01-01

... tax identification number. Possible values are: • S = Social Security Number. • T = Federal Tax... or do not apply, a null value in the appropriate field should be indicated. The file will be in a tab... complete its insurance determination process, it may add this information to the end of this data file...

12 CFR Appendix C to Part 360 - Deposit File Structure

Code of Federal Regulations, 2014 CFR

2014-01-01

... tax identification number. Possible values are: • S = Social Security Number. • T = Federal Tax... or do not apply, a null value in the appropriate field should be indicated. The file will be in a tab... complete its insurance determination process, it may add this information to the end of this data file...

12 CFR Appendix C to Part 360 - Deposit File Structure

Code of Federal Regulations, 2012 CFR

2012-01-01

... tax identification number. Possible values are: • S = Social Security Number. • T = Federal Tax... or do not apply, a null value in the appropriate field should be indicated. The file will be in a tab... complete its insurance determination process, it may add this information to the end of this data file...

76 FR 40721 - Cross-Sound Cable Company, LLC; Notice of Filing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-11

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket Nos. TS10-1-001] Cross-Sound Cable Company, LLC; Notice of Filing Take notice that on June 20, 2011, Cross-Sound Cable Company, LLC filed a request for continued waiver of the Commission's Standards of Conduct requirements of Part 358...

18 CFR 381.103 - Filings.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Filings. 381.103... OF ENERGY REVISED GENERAL RULES FEES General Provisions § 381.103 Filings. (a) Submittal of fees. Except as provided in §§ 274.201(e) and 381.106, a fee in the amount set forth in this part shall...

20 CFR 217.10 - Application filed after death.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 1 2013-04-01 2012-04-01 true Application filed after death. 217.10 Section... APPLICATION FOR ANNUITY OR LUMP SUM Applications § 217.10 Application filed after death. (a) A survivor... expenses dies before applying for the lump-sum death payment under part 234 of this chapter. The...

20 CFR 217.10 - Application filed after death.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 1 2014-04-01 2012-04-01 true Application filed after death. 217.10 Section... APPLICATION FOR ANNUITY OR LUMP SUM Applications § 217.10 Application filed after death. (a) A survivor... expenses dies before applying for the lump-sum death payment under part 234 of this chapter. The...

20 CFR 217.10 - Application filed after death.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 1 2011-04-01 2011-04-01 false Application filed after death. 217.10 Section... APPLICATION FOR ANNUITY OR LUMP SUM Applications § 217.10 Application filed after death. (a) A survivor... expenses dies before applying for the lump-sum death payment under part 234 of this chapter. The...

20 CFR 217.10 - Application filed after death.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 1 2012-04-01 2012-04-01 false Application filed after death. 217.10 Section... APPLICATION FOR ANNUITY OR LUMP SUM Applications § 217.10 Application filed after death. (a) A survivor... expenses dies before applying for the lump-sum death payment under part 234 of this chapter. The...

75 FR 64733 - Arcadia Biosciences, Inc.; Filing of Food Additive Petition (Animal Use); Safflower Seed Meal

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-20

...] Arcadia Biosciences, Inc.; Filing of Food Additive Petition (Animal Use); Safflower Seed Meal AGENCY: Food... announcing that Arcadia Biosciences, Inc., has filed a petition proposing that the food additive regulations..., Davis, CA 95618. The petition proposes to amend the food additive regulations in part 573 Food Additives...

77 FR 5201 - Ecolab, Inc.; Filing of Food Additive Petition

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-02

.... FDA-2011-F-0853] Ecolab, Inc.; Filing of Food Additive Petition AGENCY: Food and Drug Administration... Ecolab, Inc., has filed a petition proposing that the food additive regulations be amended to provide for...-1390. The petition proposes to amend the food additive regulations in 21 CFR part 173, Secondary Direct...

HDF-EOS 5 Validator

NASA Technical Reports Server (NTRS)

Ullman, Richard; Bane, Bob; Yang, Jingli

2008-01-01

A computer program partly automates the task of determining whether an HDF-EOS 5 file is valid in that it conforms to specifications for such characteristics as attribute names, dimensionality of data products, and ranges of legal data values. ["HDF-EOS" and variants thereof are defined in "Converting EOS Data From HDF-EOS to netCDF" (GSC-15007-1), which is the first of several preceding articles in this issue of NASA Tech Briefs.] Previously, validity of a file was determined in a tedious and error-prone process in which a person examined human-readable dumps of data-file-format information. The present software helps a user to encode the specifications for an HDFEOS 5 file, and then inspects the file for conformity with the specifications: First, the user writes the specifications in Extensible Markup Language (XML) by use of a document type definition (DTD) that is part of the program. Next, the portion of the program (denoted the validator) that performs the inspection is executed, using, as inputs, the specifications in XML and the HDF-EOS 5 file to be validated. Finally, the user examines the output of the validator.

Advanced Digital Imaging Laboratory Using MATLAB® (Second edition)

NASA Astrophysics Data System (ADS)

Yaroslavsky, Leonid P.

2016-09-01

The first edition of this text book focussed on providing practical hands-on experience in digital imaging techniques for graduate students and practitioners keeping to a minimum any detailed discussion on the underlying theory. In this new extended edition, the author builds on the strength of the original edition by expanding the coverage to include formulation of the major theoretical results that underlie the exercises as well as introducing numerous modern concepts and new techniques. Whether you are studying or already using digital imaging techniques, developing proficiency in the subject is not possible without mastering practical skills. Including more than 100 MATLAB® exercises, this book delivers a complete applied course in digital imaging theory and practice. Part of IOP Series in Imaging Engineering Supplementary MATLAB codes and data files are available within Book Information.

Development of a Stiffness-Based Chemistry Load Balancing Scheme, and Optimization of Input/Output and Communication, to Enable Massively Parallel High-Fidelity Internal Combustion Engine Simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kodavasal, Janardhan; Harms, Kevin; Srivastava, Priyesh

A closed-cycle gasoline compression ignition engine simulation near top dead center (TDC) was used to profile the performance of a parallel commercial engine computational fluid dynamics code, as it was scaled on up to 4096 cores of an IBM Blue Gene/Q supercomputer. The test case has 9 million cells near TDC, with a fixed mesh size of 0.15 mm, and was run on configurations ranging from 128 to 4096 cores. Profiling was done for a small duration of 0.11 crank angle degrees near TDC during ignition. Optimization of input/output performance resulted in a significant speedup in reading restart files, andmore » in an over 100-times speedup in writing restart files and files for post-processing. Improvements to communication resulted in a 1400-times speedup in the mesh load balancing operation during initialization, on 4096 cores. An improved, “stiffness-based” algorithm for load balancing chemical kinetics calculations was developed, which results in an over 3-times faster run-time near ignition on 4096 cores relative to the original load balancing scheme. With this improvement to load balancing, the code achieves over 78% scaling efficiency on 2048 cores, and over 65% scaling efficiency on 4096 cores, relative to 256 cores.« less

13. Photocopy of drawing (original in SRP Files and Reproductions) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. Photocopy of drawing (original in SRP Files and Reproductions) SRP Engineering, September 1940 RIGHTS OF WAY OF GRAND CANAL AND INDIAN BEND PUMP AND WASTE DITCH, SHOWING LOCATIONS OF DIESEL PLANT, ORIGINAL CROSSCUT HYDRO POWER HOUSE, AND DIESEL PLANT WELL NEAR WHICH INDIAN BEND POND WOULD BE CONSTRUCTED. - Crosscut Steam Plant, Indian Bend Pond & Pump Ditch, North side Salt River near Mill Avenue & Washington Street, Tempe, Maricopa County, AZ

Synchronizing files or images among several computers or removable devices. A utility to avoid frequent back-ups.

PubMed

Leonardi, Rosalia; Maiorana, Francesco; Giordano, Daniela

2008-06-01

Many of us use and maintain files on more than 1 computer--a desktop part of the time, and a notebook, a palmtop, or removable devices at other times. It can be easy to forget which device contains the latest version of a particular file, and time-consuming searches often ensue. One way to solve this problem is to use software that synchronizes the files. This allows users to maintain updated versions of the same file in several locations.

An optimal user-interface for EPIMS database conversions and SSQ 25002 EEE parts screening

NASA Technical Reports Server (NTRS)

Watson, John C.

1996-01-01

The Electrical, Electronic, and Electromechanical (EEE) Parts Information Management System (EPIMS) database was selected by the International Space Station Parts Control Board for providing parts information to NASA managers and contractors. Parts data is transferred to the EPIMS database by converting parts list data to the EP1MS Data Exchange File Format. In general, parts list information received from contractors and suppliers does not convert directly into the EPIMS Data Exchange File Format. Often parts lists use different variable and record field assignments. Many of the EPES variables are not defined in the parts lists received. The objective of this work was to develop an automated system for translating parts lists into the EPIMS Data Exchange File Format for upload into the EPIMS database. Once EEE parts information has been transferred to the EPIMS database it is necessary to screen parts data in accordance with the provisions of the SSQ 25002 Supplemental List of Qualified Electrical, Electronic, and Electromechanical Parts, Manufacturers, and Laboratories (QEPM&L). The SSQ 2S002 standards are used to identify parts which satisfy the requirements for spacecraft applications. An additional objective for this work was to develop an automated system which would screen EEE parts information against the SSQ 2S002 to inform managers of the qualification status of parts used in spacecraft applications. The EPIMS Database Conversion and SSQ 25002 User Interfaces are designed to interface through the World-Wide-Web(WWW)/Internet to provide accessibility by NASA managers and contractors.

The Business Engineering Surgical Technologies (BEST) teaching method: incubating talents for surgical innovation.

PubMed

de Ruijter, V; Halvax, P; Dallemagne, B; Swanström, L; Marescaux, J; Perretta, S

2015-01-01

Technological innovation in surgical science and healthcare is vital and calls for close collaboration between engineering and surgery. To meet this objective, BEST was designed as a free sustainable innovative teaching method for young professionals, combining surgery, engineering, and business in a multidisciplinary, high-quality, low-cost, and learning-by-doing philosophy. This paper reviews the initial outcomes of the program and discusses lessons learned and future directions of this innovative educational method. BEST educational method is delivered in two parts: the first component consisting of live streaming or pre-recorded online lectures, with an interdisciplinary profile focused on surgery, engineering, and business. The second component is an annual 5-day on-site course, organized at IRCAD-IHU, France. The program includes workshops in engineering, entrepreneurship team projects, and in-depth hands-on experience in laparoscopy, robotic surgery, interventional radiology, and flexible endoscopy with special emphasis on the interdisciplinary aspect of the training. A panel of surgeons, engineers, well-established entrepreneurs, and scientists assessed the team projects for potential patent application. From November 2011 till September 2013, 803 individual and institutional users from 79 different countries attended the online course. In total, 134 young professionals from 32 different countries applied to the onsite course. Sixty participants were selected each year for the onsite course. In addition, five participants were selected for a web-based team. Thirteen provisional patents were filed for the most promising projects. BEST proved to be a global talent incubator connecting students to high-quality education despite institutional and economical boundaries. Viable and innovative ideas arose from this revolutionary approach which is likely to spin-off significant technology transfer and lead the way for future interdisciplinary hybrid surgical education programs and career paths.

Comparison of the amount of apical debris extrusion associated with different retreatment systems and supplementary file application during retreatment process.

PubMed

Çiçek, Ersan; Koçak, Mustafa Murat; Koçak, Sibel; Sağlam, Baran Can

2016-01-01

The type of instrument affects the amount of debris extruded. The aim of this study was to compare the effect of retreatment systems and supplementary file application on the amount of apical debris extrusion. Forty-eight extracted mandibular premolars with a single canal and similar length were selected. The root canals were prepared with the ProTaper Universal system with a torque-controlled engine. The root canals were dried and were obturated using Gutta-percha and sealer. The specimens were randomly divided into four equal groups according to the retreatment procedures (Group 1, Mtwo retreatment files; Group 2, Mtwo retreatment files + Mtwo rotary file #30 supplementary file; Group 3, ProTaper Universal retreatment (PTUR) files; and Group 4, PTUR files + ProTaper F3 supplementary file). The extruded debris during instrumentation were collected into preweighed Eppendorf tubes. The amount of apically extruded debris was calculated by subtracting the initial weight of the tube from the final weight. Three consecutive weights were obtained for each tube. No statistically significant difference was found in the amount of apically extruded debris between Groups 1 and 3 (P = 0.590). A significant difference was observed between Groups 1 and 2 (P < 0.05), and between Groups 3 and 4 (P < 0.05). The use of supplementary file significantly increased the amount of apically extruded debris.

47 CFR 24.243 - The cost-sharing formula.

Code of Federal Regulations, 2010 CFR

2010-10-01

...; monitoring or control equipment; engineering costs (design/path survey); installation; systems testing; FCC filing costs; site acquisition and civil works; zoning costs; training; disposal of old equipment; test...

Feasibility of Actively Cooled Silicon Nitride Airfoil for Turbine Applications Demonstrated

NASA Technical Reports Server (NTRS)

Bhatt, Ramakrishna T.

2001-01-01

Nickel-base superalloys currently limit gas turbine engine performance. Active cooling has extended the temperature range of service of nickel-base superalloys in current gas turbine engines, but the margin for further improvement appears modest. Therefore, significant advancements in materials technology are needed to raise turbine inlet temperatures above 2400 F to increase engine specific thrust and operating efficiency. Because of their low density and high-temperature strength and thermal conductivity, in situ toughened silicon nitride ceramics have received a great deal of attention for cooled structures. However, the high processing costs and low impact resistance of silicon nitride ceramics have proven to be major obstacles for widespread applications. Advanced rapid prototyping technology in combination with conventional gel casting and sintering can reduce high processing costs and may offer an affordable manufacturing approach. Researchers at the NASA Glenn Research Center, in cooperation with a local university and an aerospace company, are developing actively cooled and functionally graded ceramic structures. The objective of this program is to develop cost-effective manufacturing technology and experimental and analytical capabilities for environmentally stable, aerodynamically efficient, foreign-object-damage-resistant, in situ toughened silicon nitride turbine nozzle vanes, and to test these vanes under simulated engine conditions. Starting with computer aided design (CAD) files of an airfoil and a flat plate with internal cooling passages, the permanent and removable mold components for gel casting ceramic slips were made by stereolithography and Sanders machines, respectively. The gel-cast part was dried and sintered to final shape. Several in situ toughened silicon nitride generic airfoils with internal cooling passages have been fabricated. The uncoated and thermal barrier coated airfoils and flat plates were burner rig tested for 30 min without and with air cooling. Without cooling, the surface temperature of the flat plate reached approximately 2350 F. Starting with computer aided design (CAD) files of an airfoil and a flat plate with internal cooling passages, the permanent and removable mold components for gel casting ceramic slips were made by stereolithography and Sanders machines, respectively. The gel-cast part was dried and sintered to final shape. Several in situ toughened silicon nitride generic airfoils with internal cooling passages have been fabricated. The uncoated and thermal barrier coated airfoils and flat plates were burner rig tested for 30 min without and with air cooling. Without cooling, the surface temperature of the flat plate reached approximately 2350 F. With cooling, the surface temperature decreased to approximately 1910 F--a drop of approximately 440 F. This preliminary study demonstrates that a near-net-shape silicon nitride airfoil can be fabricated and that silicon nitride can sustain severe thermal shock and the thermal gradients induced by cooling and, thus, is a viable candidate for cooled components.

SMARTSware for SMARTS users to facilitate data reduction and data analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

2005-01-01

The software package SMARTSware is made by one of the instrument scientist on the engineering neutron diffractometer SMARTS at the Lujan Center, a national user facility at Los Alamos Neutron Scattering Center (LANSCE). The purpose of the software is to facilitate the data analysis of powder diffraction data recorded at the Lujan Center, and hence the target audience is users performing experiments at the one of the powder diffractometers (SMARTS, HIPPO, HIPD and NPDF) at the Lujan Center. The beam time at the Lujan Center is allocated by peer review of internally and extenally submitted proposals, and therefore many ofmore » the users who are granted beam time are from the international science community. Generally, the users are only at the Lujan Center for a short period of time while they are performing the experiments, and often they leave with several data sets that have not been analyzed. The distribution of the SMARTSware software package will minimize their efforts when analyzing the data once they are back at their institution. Description of software: There are two main parts of the software; a part used to generate instrument parameter files from a set of calibration runs (Smartslparm, SmartsBin, SmartsFitDif and SmartsFitspec); and a part that facilitates the batch refinement of multiple diffraction patterns (SmartsRunRep, SmartsABC, SmartsSPF and SmartsExtract). The former part may only be peripheral to most users, but is a critical part of the instrument scientists' efforts in calibrating their instruments. The latter part is highly applicable to the users as they often need to analyze or re-analyze large sets of data. The programs within the SMARTSware package heavily rely on GSAS for the Rietveld and single peak refinements of diffraction data. GSAS (General Structure Analysis System) is a public available software also originating from LANL. Subroutines and libraries from the NeXus project (a world wide trust to standardize diffraction data formats) and National Center for Supercomputing Applications (NCSA) at the University of Illinois (the Hierarchical Data Format Software Library and Utilities) are used in the programs. All these subroutines and libraries are publicly available through the GNU Public License and/or Freeware. The package also contains sample input and output text files and a manual (LA-UR 04-6581). The executables and sample files will be available for down load at http://public.lanl.gov/clausen/SMARTSware.html and ftp://lansce.lanl.gov/clausen/SMARTSware/SMARTSware.zip, but the source codes will only be made available by written request to clausen@lanl.gov.« less

6. Photographic copy of original construction drawing, FOUNDATION PLAN, SECTIONS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. Photographic copy of original construction drawing, FOUNDATION PLAN, SECTIONS AND GENERAL NOTED, SHEET 6 OF 11, DRAWING NO. 35-03-05 SF 5/1673, U.S. Army Engineer District, Detroit, Corps of Engineers, 9 June, 1959, on file Selfridge Base Museum. - Selfridge Field, Building No. 1041, West of E Street, north of D Street, Mount Clemens, Macomb County, MI

Bio-Nanotechnology Infrastructure and Technology Oriented Research

DTIC Science & Technology

2008-07-17

4) dissemination of the accomplishments through filing patents, publishing refereed papers and presenting at international conferences and meetings...NUMBER 6. AUTHOR(S) Kinzy Jones 5d. PROJECT NUMBER Florida International University ADVANCED MATERIALS ENGINEERING RESERACH INSTITUTE 5e...University ADVANCED MATERIALS ENGINEERING RESERACH INSTITUTE 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES

53. Historic photo of Building 202 test cell interior, with ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

53. Historic photo of Building 202 test cell interior, with engine mounted on test stand A, showing surrounding fuel and oxidant delivery systems and instruments, May 18, 1967. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-67-1739. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

48. Historic photo of Building 202 test cell interior, test ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

48. Historic photo of Building 202 test cell interior, test stand A with zone injector engine; technician is working on equipment panel in foreground, June 3, 1966. On file at NASA Plumbrook Research Center, Sandusky, Ohio. NASA photo number C-66-2397. - Rocket Engine Testing Facility, GRC Building No. 202, NASA Glenn Research Center, Cleveland, Cuyahoga County, OH

5. Photographic copy of construction drawing, dated September 30, 1970, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Photographic copy of construction drawing, dated September 30, 1970, U.S. Army Engineer District, Detroit, Corps of Engineers, in possession of Selfridge Base Museum, Mt. Clemens, Michigan. ELEVATIONS AND DETAILS, SHEET 1 OF 3, DRAWING NO. 86-11-22, FILE SF 5/1782. - Selfridge Field, Building No. 570, Ammo Road northeast of Taxiway A, Mount Clemens, Macomb County, MI

78 FR 26818 - Self-Regulatory Organizations; New York Stock Exchange LLC; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-08

... modifiers available to algorithms used by Floor brokers to route interest to the Exchange's matching engine...-Quotes entered into the matching engine by an algorithm on behalf of a Floor broker. STP modifiers would... algorithms removes impediments to and perfects the mechanism of a free and open market because there is a...

Cloud parallel processing of tandem mass spectrometry based proteomics data.

PubMed

Mohammed, Yassene; Mostovenko, Ekaterina; Henneman, Alex A; Marissen, Rob J; Deelder, André M; Palmblad, Magnus

2012-10-05

Data analysis in mass spectrometry based proteomics struggles to keep pace with the advances in instrumentation and the increasing rate of data acquisition. Analyzing this data involves multiple steps requiring diverse software, using different algorithms and data formats. Speed and performance of the mass spectral search engines are continuously improving, although not necessarily as needed to face the challenges of acquired big data. Improving and parallelizing the search algorithms is one possibility; data decomposition presents another, simpler strategy for introducing parallelism. We describe a general method for parallelizing identification of tandem mass spectra using data decomposition that keeps the search engine intact and wraps the parallelization around it. We introduce two algorithms for decomposing mzXML files and recomposing resulting pepXML files. This makes the approach applicable to different search engines, including those relying on sequence databases and those searching spectral libraries. We use cloud computing to deliver the computational power and scientific workflow engines to interface and automate the different processing steps. We show how to leverage these technologies to achieve faster data analysis in proteomics and present three scientific workflows for parallel database as well as spectral library search using our data decomposition programs, X!Tandem and SpectraST.

76 FR 55841 - Extension of Comment Period for Notice of Proposed Rulemaking on Changes in Requirements for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-09

... and the Rules of Practice for Filings Pursuant to the Madrid Protocol to permit the USPTO to require... Rules of Practice (37 CFR part 2) and the Rules of Practice for Filings Pursuant to the Madrid Protocol (``Madrid Rules'') (37 CFR part 7) to provide for the USPTO to require: (1) Any information, exhibits, and...

46 CFR 531.5 - Duty to file.

Code of Federal Regulations, 2010 CFR

2010-10-01

... General Provisions § 531.5 Duty to file. (a) The duty under this part to file NSAs, amendments and notices... NSA. (b) The Commission shall not order any person to pay the difference between the amount billed and agreed upon in writing with a common carrier or its agent and the amount set forth in an NSA by that...

46 CFR 531.5 - Duty to file.

Code of Federal Regulations, 2012 CFR

2012-10-01

... General Provisions § 531.5 Duty to file. (a) The duty under this part to file NSAs, amendments and notices... NSA. (b) The Commission shall not order any person to pay the difference between the amount billed and agreed upon in writing with a common carrier or its agent and the amount set forth in an NSA by that...

46 CFR 531.5 - Duty to file.

Code of Federal Regulations, 2013 CFR

2013-10-01

... General Provisions § 531.5 Duty to file. (a) The duty under this part to file NSAs, amendments and notices... NSA. (b) The Commission shall not order any person to pay the difference between the amount billed and agreed upon in writing with a common carrier or its agent and the amount set forth in an NSA by that...

46 CFR 531.5 - Duty to file.

Code of Federal Regulations, 2011 CFR

2011-10-01

... General Provisions § 531.5 Duty to file. (a) The duty under this part to file NSAs, amendments and notices... NSA. (b) The Commission shall not order any person to pay the difference between the amount billed and agreed upon in writing with a common carrier or its agent and the amount set forth in an NSA by that...

46 CFR 531.5 - Duty to file.

Code of Federal Regulations, 2014 CFR

2014-10-01

... General Provisions § 531.5 Duty to file. (a) The duty under this part to file NSAs, amendments and notices... NSA. (b) The Commission shall not order any person to pay the difference between the amount billed and agreed upon in writing with a common carrier or its agent and the amount set forth in an NSA by that...

78 FR 55076 - Ganley Ford West, Inc.; Analysis of Proposed Consent Order To Aid Public Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-09

... FEDERAL TRADE COMMISSION [File No. 122 3269] Ganley Ford West, Inc.; Analysis of Proposed Consent... for Comment part of the SUPPLEMENTARY INFORMATION section below. Write ``Ganley Ford, File No. 122... receive it on or before October 3, 2013. Write ``Ganley Ford, File No. 122 3269'' on your comment. Your...

76 FR 22611 - Specified Tax Return Preparers Required To File Individual Income Tax Returns Using Magnetic...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-22

... DEPARTMENT OF THE TREASURY Internal Revenue Service 26 CFR Part 301 [TD 9518] RIN 1545-BJ52 Specified Tax Return Preparers Required To File Individual Income Tax Returns Using Magnetic Media... who prepare and file individual income tax returns using magnetic media pursuant to section 6011(e)(3...

39 CFR 966.6 - Filing, docketing and serving documents; computation of time; representation of parties.

Code of Federal Regulations, 2013 CFR

2013-07-01

... are between 8:45 a.m. and 4:45 p.m., eastern standard or daylight saving time as appropriate during...; computation of time; representation of parties. 966.6 Section 966.6 Postal Service UNITED STATES POSTAL... time; representation of parties. (a) Filing. All documents required under this part must be filed by...

39 CFR 966.6 - Filing, docketing and serving documents; computation of time; representation of parties.

Code of Federal Regulations, 2014 CFR

2014-07-01

... are between 8:45 a.m. and 4:45 p.m., eastern standard or daylight saving time as appropriate during...; computation of time; representation of parties. 966.6 Section 966.6 Postal Service UNITED STATES POSTAL... time; representation of parties. (a) Filing. All documents required under this part must be filed by...

76 FR 78008 - Laboratory Corporation of America Holdings and Orchid Cellmark Inc.; Analysis of Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-15

... FEDERAL TRADE COMMISSION [File No. 111 0155] Laboratory Corporation of America Holdings and Orchid... Comment part of the SUPPLEMENTARY INFORMATION section below. Write ``LabCorp/Orchid, File No. 111 0155... consider your comment, we must receive it on or before January 9, 2012. Write ''LabCorp/Orchid, File No...

12 CFR Appendix D to Part 360 - Sweep/Automated Credit Account File Structure

Code of Federal Regulations, 2012 CFR

2012-01-01

.../Automated Credit Account File Structure This is the structure of the data file to provide information to the... remainder of the data fields defined below should be populated. For data provided in the Sweep/Automated... number. The Account Identifier may be composed of more than one physical data element. If multiple fields...

12 CFR Appendix D to Part 360 - Sweep/Automated Credit Account File Structure

Code of Federal Regulations, 2011 CFR

2011-01-01

.../Automated Credit Account File Structure This is the structure of the data file to provide information to the... remainder of the data fields defined below should be populated. For data provided in the Sweep/Automated... number. The Account Identifier may be composed of more than one physical data element. If multiple fields...

12 CFR Appendix D to Part 360 - Sweep/Automated Credit Account File Structure

Code of Federal Regulations, 2014 CFR

2014-01-01

.../Automated Credit Account File Structure This is the structure of the data file to provide information to the... remainder of the data fields defined below should be populated. For data provided in the Sweep/Automated... number. The Account Identifier may be composed of more than one physical data element. If multiple fields...

12 CFR Appendix D to Part 360 - Sweep/Automated Credit Account File Structure

Code of Federal Regulations, 2013 CFR

2013-01-01

.../Automated Credit Account File Structure This is the structure of the data file to provide information to the... remainder of the data fields defined below should be populated. For data provided in the Sweep/Automated... number. The Account Identifier may be composed of more than one physical data element. If multiple fields...

78 FR 12307 - Taylor, G. Tom; Notice of Filing

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-22

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ID-5705-001] Taylor, G. Tom; Notice of Filing Take notice that on February 14, 2013, G. Tom Taylor filed an application to hold interlocking positions pursuant to section 305(b) of the Federal Power Act, 16 U.S.C. 825d(b), Part 45 of the...

78 FR 17653 - Wright, Laura H.; Notice of Filing

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-22

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ID-7103-000] Wright, Laura H.; Notice of Filing Take notice that on March 14, 2013, Laura H. Wright filed an application to hold interlocking positions, pursuant to section 305(b) of the Federal Power Act, 16 U.S.C. 825d(b) (2008) and Part...

A comparison of mesial molar root canal preparations using two engine-driven instruments and the balanced-force technique.

PubMed

Imura, N; Kato, A S; Novo, N F; Hata, G; Uemura, M; Toda, T

2001-10-01

The purpose of this study was to compare the effects of two engine-driven, nickel-titanium instrument systems with hand files in the final shape of slight and moderately curved canals. A total of 72 mesial roots of extracted human mandibular molars were divided into three groups: ProFile .04 taper, Pow-R rotary systems, and Flex-R hand-filing technique. The roots were mounted and cross-sectioned at two different horizontal levels using a modified Bramante technique. Pre- and postinstrumented cross-sectional roots were imaged, recorded, and computer analyzed. Results showed that, at the middle third, in almost all groups, there was a tendency of cutting more toward the mesial side with only one exception: Pow-R cut more to the distal side (danger zone) (p < 0.02). At the apical third, Flex-R (p < 0.03) and ProFile (0.001) transported to the mesial side (danger zone) when the curvature increased. When the three techniques were compared analyzing each side and considering the two groups of curvature, at the middle third in the moderately curved-canal group, Flex-R cut statistically more than Pow-R toward the lingual side. The other comparisons showed no statistically significant difference. When the techniques were compared in relation with the degree of curvature, in the apical third, ProFile .04 cut statistically more toward the mesial side in the moderately curved canal group than in the slightly curved canal group. The other comparisons showed no statistically significant difference. Canal preparation time was shorter with hand instrumentation (p < .05) in a few instances.

14 CFR 232.5 - Filing and service of applications, answers, and replies.

Code of Federal Regulations, 2010 CFR

2010-01-01

... TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS TRANSPORTATION OF MAIL, REVIEW OF ORDERS OF POSTMASTER... written application, answer, or reply filed under this part, and the formal specifications of papers...

12 CFR Appendix F to Part 360 - Customer File Structure

Code of Federal Regulations, 2013 CFR

2013-01-01

... extract. The files will be encrypted using an FDIC-supplied algorithm. The FDIC will transmit the encryption algorithm over FDICconnect. Note: Each record must contain the customer's name and permanent legal...

12 CFR Appendix F to Part 360 - Customer File Structure

Code of Federal Regulations, 2012 CFR

2012-01-01

... extract. The files will be encrypted using an FDIC-supplied algorithm. The FDIC will transmit the encryption algorithm over FDICconnect. Note: Each record must contain the customer's name and permanent legal...

12 CFR Appendix F to Part 360 - Customer File Structure

Code of Federal Regulations, 2011 CFR

2011-01-01

... extract. The files will be encrypted using an FDIC-supplied algorithm. The FDIC will transmit the encryption algorithm over FDICconnect. Note: Each record must contain the customer's name and permanent legal...

12 CFR Appendix F to Part 360 - Customer File Structure

Code of Federal Regulations, 2014 CFR

2014-01-01

... extract. The files will be encrypted using an FDIC-supplied algorithm. The FDIC will transmit the encryption algorithm over FDICconnect. Note: Each record must contain the customer's name and permanent legal...

12 CFR Appendix F to Part 360 - Customer File Structure

Code of Federal Regulations, 2010 CFR

2010-01-01

... extract. The files will be encrypted using an FDIC-supplied algorithm. The FDIC will transmit the encryption algorithm over FDICconnect. Note: Each record must contain the customer's name and permanent legal...

14 CFR 221.1 - Applicability of this part.

Code of Federal Regulations, 2010 CFR

2010-01-01

... amendments to tariffs of air carriers and foreign air carriers filed with the Department pursuant to chapter 415 of the statute shall be constructed, published, filed, posted and kept open for public inspection...

Video File - NASA Conducts 2nd RS-25 Engine Hot Fire of 2018 - 2018-02-01

NASA Image and Video Library

2018-02-01

NASA Conducts 2nd RS-25 Engine Hot Fire of 2018. A 365-second hot fire test on Feb. 1, 2018, at NASA’s Stennis Space Center in Mississippi marks the completion of “green run” testing, or flight certification, for all new RS-25 engine flight controllers slated for Exploration Mission-2, the first Space Launch System mission with astronauts on board. In addition to the flight controller, the Feb. 1 hot fire also marked the third test of a 3D printed pogo accumulator assembly for the RS-25 engine.

LST CGM Generator and Viewer Final Report CRADA No. TSB-1558-98

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vickers, Don; Larson, Don

The purpose of this project was to jointly develop and test a software plug-in that would convert native Pro /ENGINEER digital engineering drawings to Computer Graphics Metafile (CGM) format. If it was not feasible to convert the Pro/ENGINEER files, we planned to develop and test a similar conversion of native AutoCAD engineering drawings to CGM. CGM viewer plug-ins were developed as needed. There were four main tasks in this project: 1. Requirements for CGM Plug-in 2. Product Evaluation 3. Product Development Feasibility Study 4. Developing a "Plug-In" Application.

Roofer: An Engineered Management System (EMS) for Bituminous Built-Up Roofs

DTIC Science & Technology

1989-12-01

individual roof projects. Figure 1 shows an example of a filing sequence for a typical recordkceping system. The file should contain a Building Folder ...for each building and a Roof Section Foldcr for each roof section on the building. Building Folder The Building Folder should contain a completed...should also be kept in the building folder , or if they are kept elsewhere, their location should be stated in the folder . Roof Section Folder A Roof

Cyber Moat: Adaptive Virtualized Network Framework for Deception and Disinformation

DTIC Science & Technology

2016-12-12

As one type of bots, web crawlers have been leveraged by search engines (e.g., Googlebot by Google) to popularize websites through website indexing...However, the number of malicious bots is increasing too. To regulate the behavior of crawlers, most websites include a file called "robots.txt" that...However, "robots.txt" only provides a guideline, and almost all malicious robots ignore it. Moreover, since this file is publicly available, malicious

[Intranet-based integrated information system of radiotherapy-related images and diagnostic reports].

PubMed

Nakamura, R; Sasaki, M; Oikawa, H; Harada, S; Tamakawa, Y

2000-03-01

To use an intranet technique to develop an information system that simultaneously supports both diagnostic reports and radiotherapy planning images. Using a file server as the gateway a radiation oncology LAN was connected to an already operative RIS LAN. Dose-distribution images were saved in tagged-image-file format by way of a screen dump to the file server. X-ray simulator images and portal images were saved in encapsulated postscript format in the file server and automatically converted to portable document format. The files on the file server were automatically registered to the Web server by the search engine and were available for searching and browsing using the Web browser. It took less than a minute to register planning images. For clients, searching and browsing the file took less than 3 seconds. Over 150,000 reports and 4,000 images from a six-month period were accessible. Because the intranet technique was used, construction and maintenance was completed without specialty. Prompt access to essential information about radiotherapy has been made possible by this system. It promotes public access to radiotherapy planning that may improve the quality of treatment.

The self-adjusting file (SAF). Part 1: respecting the root canal anatomy--a new concept of endodontic files and its implementation.

PubMed

Metzger, Zvi; Teperovich, Ehud; Zary, Raviv; Cohen, Raphaela; Hof, Rafael

2010-04-01

To introduce a new concept, the self-adjusting file (SAF), and discuss its unique features compared with current rotary nickel-titanium file systems. The SAF file is hollow and designed as a thin cylindrical nickel-titanium lattice that adapts to the cross-section of the root canal. A single file is used throughout the procedure. It is inserted into a path initially prepared by a # 20 K-file and operated with a transline- (in-and-out) vibration. The resulting circumferential pressure allows the file's abrasive surface to gradually remove a thin uniform hard-tissue layer from the entire root canal surface, resulting in a canal with a similar cross-section but of larger dimensions. This holds also for canals with an oval or flat cross-section, which will be enlarged to a flat or oval cross-section of larger dimensions. The straightening of curved canals is also reduced because of the high pliability of the file and the absence of a rigid metal core. Thus, the original shape of the root canal is respected both longitudinally and in cross-section. The hollow SAF file is operated with a constant flow of irrigant that enters the full length of the canal and that is activated by the vibration and is replaced continuously throughout the procedure. This results in effective cleaning even at the cul de sac apical part of the canal. The SAF has high mechanical endurance; file separation does not occur; and mechanical failure, if it occurs, is limited to small tears in the latticework. The SAF represents a new step forward in endodontic file development that may overcome many of the shortcomings of current rotary nickel-titanium file systems. Copyright (c) 2010 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Ramp Technology and Intelligent Processing in Small Manufacturing

NASA Technical Reports Server (NTRS)

Rentz, Richard E.

1992-01-01

To address the issues of excessive inventories and increasing procurement lead times, the Navy is actively pursuing flexible computer integrated manufacturing (FCIM) technologies, integrated by communication networks to respond rapidly to its requirements for parts. The Rapid Acquisition of Manufactured Parts (RAMP) program, initiated in 1986, is an integral part of this effort. The RAMP program's goal is to reduce the current average production lead times experienced by the Navy's inventory control points by a factor of 90 percent. The manufacturing engineering component of the RAMP architecture utilizes an intelligent processing technology built around a knowledge-based shell provided by ICAD, Inc. Rules and data bases in the software simulate an expert manufacturing planner's knowledge of shop processes and equipment. This expert system can use Product Data Exchange using STEP (PDES) data to determine what features the required part has, what material is required to manufacture it, what machines and tools are needed, and how the part should be held (fixtured) for machining, among other factors. The program's rule base then indicates, for example, how to make each feature, in what order to make it, and to which machines on the shop floor the part should be routed for processing. This information becomes part of the shop work order. The process planning function under RAMP greatly reduces the time and effort required to complete a process plan. Since the PDES file that drives the intelligent processing is 100 percent complete and accurate to start with, the potential for costly errors is greatly diminished.

Ramp technology and intelligent processing in small manufacturing

NASA Astrophysics Data System (ADS)

Rentz, Richard E.

1992-04-01

To address the issues of excessive inventories and increasing procurement lead times, the Navy is actively pursuing flexible computer integrated manufacturing (FCIM) technologies, integrated by communication networks to respond rapidly to its requirements for parts. The Rapid Acquisition of Manufactured Parts (RAMP) program, initiated in 1986, is an integral part of this effort. The RAMP program's goal is to reduce the current average production lead times experienced by the Navy's inventory control points by a factor of 90 percent. The manufacturing engineering component of the RAMP architecture utilizes an intelligent processing technology built around a knowledge-based shell provided by ICAD, Inc. Rules and data bases in the software simulate an expert manufacturing planner's knowledge of shop processes and equipment. This expert system can use Product Data Exchange using STEP (PDES) data to determine what features the required part has, what material is required to manufacture it, what machines and tools are needed, and how the part should be held (fixtured) for machining, among other factors. The program's rule base then indicates, for example, how to make each feature, in what order to make it, and to which machines on the shop floor the part should be routed for processing. This information becomes part of the shop work order. The process planning function under RAMP greatly reduces the time and effort required to complete a process plan. Since the PDES file that drives the intelligent processing is 100 percent complete and accurate to start with, the potential for costly errors is greatly diminished.

A user-oriented synthetic workload generator

NASA Technical Reports Server (NTRS)

Kao, Wei-Lun

1991-01-01

A user oriented synthetic workload generator that simulates users' file access behavior based on real workload characterization is described. The model for this workload generator is user oriented and job specific, represents file I/O operations at the system call level, allows general distributions for the usage measures, and assumes independence in the file I/O operation stream. The workload generator consists of three parts which handle specification of distributions, creation of an initial file system, and selection and execution of file I/O operations. Experiments on SUN NFS are shown to demonstrate the usage of the workload generator.