Comparison of cross culture engineering ethics training using the simulator for engineering ethics education.

PubMed

Chung, Christopher

2015-04-01

This paper describes the use and analysis of the Simulator for Engineering Ethics Education (SEEE) to perform cross culture engineering ethics training and analysis. Details describing the first generation and second generation development of the SEEE are published in Chung and Alfred, Science and Engineering Ethics, vol. 15, 2009 and Alfred and Chung, Science and Engineering Ethics, vol. 18, 2012. In this effort, a group of far eastern educated students operated the simulator in the instructional, training, scenario, and evaluation modes. The pre and post treatment performance of these students were compared to U.S. Educated students. Analysis of the performance indicated that the far eastern educated student increased their level of knowledge 23.7 percent while U.S. educated students increased their level of knowledge by 39.3 percent.

Scalloped Hibachi and Vacuum-Pressure Foil for Electra: Electron Beam Pumped KrF Laser

DTIC Science & Technology

2007-06-01

confinement fusion energy (IFE) applications [1-8]. The foils are a critical part of this durability and efficiency. The electron beam, generated in a high...and A. W. Maschke, “Design descriptions of the Prometheus- L and -H inertial fusion energy drivers,” Fusion Engineering and Design, vol. 25, pp...inertial fusion energy ,” Fusion Engineering and Design, vol. 44, pp. 371-375, March 1999. [4] I. Okuda, e. Takahashi, and Y. Owadano, “A

Photocopy from Evan Leigh's Modern Cotton Spinning (Vol 1), Manchester, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy from Evan Leigh's Modern Cotton Spinning (Vol 1), Manchester, 1873 (PL XX); illustration used by eminent British textile engineer to exemplify the ultimate development in American cotton mill technology. - Harmony Manufacturing Company, Mill Number 3, 100 North Mohawk Street, Cohoes, Albany County, NY

Monaural Speech Segregation by Integrating Primitive and Schema-Based Analysis

DTIC Science & Technology

2008-02-03

vol. 19, pp. 475-492. Wang D.L. and Chang P.S. (2008): An oscillatory correlation model of auditory streaming. Cognitive Neurodynamics , vol. 2, pp...Subcontracts DeLiang Wang (Principal Investigator) March 2008 Department of Computer Science & Engineering and Center for Cognitive Science The

A Salzburg Global Seminar: "Optimizing Talent: Closing Education and Social Mobility Gaps Worldwide." Policy Notes. Volume 20, Number 3, Fall 2012

ERIC Educational Resources Information Center

Schwartz, Robert

2012-01-01

This issue of ETS Policy Notes (Vol. 20, No. 3) provides highlights from the Salzburg Global Seminar in December 2011. The seminar focused on bettering the educational and life prospects of students up to age 18 worldwide. [This article was written with the assistance of Beth Brody.

"Effect of Anxiety Reduction on Children's School Performance and Social Adjustment": Correction to Wood (2006)

ERIC Educational Resources Information Center

Wood, Jeffrey J.

2007-01-01

Reports an error in "Effect of anxiety reduction on children's school performance and social adjustment" by Jeffrey Wood (Developmental Psychology, 2006[Mar], Vol 42[2], 345-349). The byline and author note should have included the author's middle initial, J. Thus, the byline and author note should refer to "Jeffrey J. Wood." The correction is…

Taking Action: Navigating the Common Core State Standards and Assessments. Policy Notes. Volume 21, Number 2, Fall 2013

ERIC Educational Resources Information Center

Yaffe, Deborah

2013-01-01

This issue of ETS Policy Notes (Vol 21, No. 2) highlights the discussion from "Taking Action: Navigating the Common Core State Standards and Assessments," a conference co-convened by ETS and the National Urban League (NUL) in February 2013. Part of the Saturdays at ETS series, the conference brought together researchers, funders,…

Shuttle mission simulator. Volume 2: Requirement report, volume 2, revision C

NASA Technical Reports Server (NTRS)

Burke, J. F.

1973-01-01

The requirements for space shuttle simulation which are discussed include: general requirements, program management, system engineering, design and development, crew stations, on-board computers, and systems integration. For Vol. 1, revision A see N73-22203, for Vol 2, revision A see N73-22204.

United States Air Force Summer Research Program -- 1993. Volume 9. Rome Laboratory

DTIC Science & Technology

1993-12-01

Walter Field: Electrical Engineering MS Laboratory: RL/IR Electrical Engineering University of Maine Vol-Page No: 9- 9 Orono, ME 4469-0000 Swindal, J...0000 Tipton, Kevin Field: Zoology MS Laboratory: AL/CF Nutrition and Food Scienc Auburn University Vol-Page No: 7-11 Auburn, AL 36849-5605 Tornow ...deterministic analysis assumed only 1-17 one handling. w ~vA-A-, PPIMAJý PATH Legen(3ND P"ysCaI LinK (forwarid VPC P’ýs Cal L-,* (reverse VPC) Figure 8. OPNET

United States Air Force Summer Research Program -- 1993. Volume 16. Arnold Engineering Development Center. Frank J. Seiler Research Laboratory. Wilford Hall Medical Center

DTIC Science & Technology

1993-12-01

A I 7f t UNITED STATE AIR FORCE SUMMER RESEARCH PROGRAM -- 1993 SUMMER RESEARCH PROGRAM FINAL REPORTS VOLUME 16 ARNOLD ENGINEERING DEVELOPMENT CENTER...FRANK J. SELLER RESEARCH LABORATORY WILFORD HALL MEDICAL CENTER RESEARCH & DEVELOPMENT LABORATORIES 5800 Uplander Way Culver City, CA 90230-6608...National Rd. Vol-Page No: 15-44 Dist Tecumseh High School 8.4 New Carlisle, OH 45344-0000 Barber, Jason Laboratory: AL/CF 1000 10th St. Vol-Page No

Evaluation of the Utilization of Research and Development Results by the Naval Facilities Engineering Command.

DTIC Science & Technology

1980-09-01

Transfer, Vol. 3, No. 2, Spring 1979. Jolly, J. A., J. W . Creighton, and David A. Tansik, The Journal of Technology Transfer, Vol. 4, No. 1, Fall 1-9-79...200 Stovall Strr t , . VA 22332. Released as a Technical Report by: W . M. Tolles Dean of Research Unclassified SECURITY CLASSIFICATION OF ’wee 0469 Rom...SUPPLEMENTARY NOT*5S IN Itv a 110010 (Cewtfn,. -R .evoro old* It 066040pweE OW defo 4V blooS .MSe) Technology Transfer Civil Engineering Laboratory Research and

Comparison Between Predictions and Measurements of Performance Characteristics for an Eight Pocket Hybrid (Combination Hydrostatic and Hydrodynamic) Thrust Bearing

DTIC Science & Technology

2008-12-03

STB stainless steel housing. Drive End Thrust Collar Free End Splash Guard Slave Thrust Bearing Face STB Flange Figure 12: Exploded view of slave...Bulk Flow Analysis of Hybrid Thrust Bearing for Process Fluid Applications.” ASME Trans., Journal of Tribology , January, Vol. 122 (1), pp. 170-180...ASME Journal of Tribology , Vol. 123, pp. 768-776 [5] San Andrés, L., (2006), “MEEN 626 Notes 2 Derivation of the Classical Reynolds Equation for

Lightweight Portable Plasma Medical Device - Plasma Engineering Research Laboratory

DTIC Science & Technology

2014-10-01

34Optical study of radicals (OH, O, H, N) in a needle- plate negative pulsed streamer corona discharge ," Plasma Chemistry and Plasma Processing, vol. 26...pulsed corona discharge ," European Physical Journal D, vol. 38, pp. 515-522, Jun 2006. [35] W. Wang, S. Wang, F. Liu, W. Zheng, and D. Wang, "Optical...study of OH radical in a wire-plate pulsed corona discharge ," Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, vol. 63, pp. 477

SINGER: A Computer Code for General Analysis of Two-Dimensional Reinforced Concrete Structures. Volume 1. Solution Process

DTIC Science & Technology

1975-05-01

Conference on Earthquake Engineering, Santiago de Chile, 13-18 January 1969, Vol. I , Session B2, Chilean Association oil Seismology and Earth- quake...Nuclear Agency May 1975 DISTRIBUTED BY: KJ National Technical Information Service U. S. DEPARTMENT OF COMMERCE ^804J AFWL-TR-74-228, Vol. I ...CM o / i ’•fu.r ) V V AFWL-TR- 74-228 Vol. I SINGER: A COMPUTER CODE FOR GENERAL ANALYSIS OF TWO-DIMENSIONAL CONCRETE STRUCTURES Volum« I

Relevance of Red Book Information to the Directorate of Engineering and Housing Decisionmaking Process

DTIC Science & Technology

1990-09-01

decisionmaking. (Adapted from: R. J. Boland, Jr., "Sense-Making of Accounting Data as a Technique of Organizational Diagnosis ," Management Science, Vol 30, No...Making of Accounting Data as a Technique of Organizational Diagnosis ," Managenent Science, Vol 30, No. 7 (July 1984), pp 868-882. 49 Decisionmaking...Third Edition (Irwin, 1984). Boland, R.J., Jr., "Sense-Making of Accounting Data as a Technique of Organizational Diagnosis ," Management Science, Vol 30

Autonomous Sonar Classification Using Expert Systems

DTIC Science & Technology

1992-06-01

34Multisensor Integration and Fusion in Intelligent System," ZEEE Tmnsactions on Systems, Man and Cybernetics, vol. 19 no. 5, September/Octciber...34 University of California Santa Barbara Department of Computer Science Technical Report TRCS89-06, February 1989. ZEEE , vol. 71 no. 7, July 1983, pp. 872...AutonomousUnderwater Vehicles" , Proceedingsof the ZEEE Oceanic Engineering Society Conference A W 92, Washington DC, June 1992. Corkill, Daniel, "BlackboardSystems," AIErpert, vol. 6 no. 9, September 1991, pp. 40-47. 559

Written Communication Skills for Scientists and Engineers

NASA Astrophysics Data System (ADS)

Narayanan, M.

2016-12-01

Lord Chancellor, Francis Bacon of England said: Reading maketh a full man; conference a ready man; and writing an exact man. Even after his death, Francis Bacon remained extremely influential through his works, especially as philosophical advocate and practitioner of the scientific method during the scientific revolution. Written communication skills are extremely important for scientists and engineers because it helps them to achieve their goals effectively and meet stipulated deadlines according to a pre-established schedule. Richard Arum and Josipa Roksa claim that American students are learning very little during their first two years of college (Arum and Roksa, 2011). Written communication involves expressing yourself clearly, using language with precision; constructing a logical argument; taking notes; editing and summarizing; and writing reports. There are three main elements to written communication. First and foremost is the structure because this in principle outlines clearly the way the entire content is laid out. Second, the style which primarily indicates the way it is written and how communication is made effective and vibrant. Third, the content which should document in complete detail, what you are writing about. Some researchers indicate that colleges and universities are failing to prepare the students to meet the demanding challenges of the present day workforce and are struggling to maintain an international status (Johnson, K. 2013). In this presentation, the author provides some guidelines to help students improve their written communication skills. References: Johnson, Kristine (2013) "Why Students Don't Write: Educating in the Era of Credentialing: Academically Adrift: Limited Learning on College Campuses," Conversations on Jesuit Higher Education: Vol. 43, Article 9. Available at: http://epublications.marquette.edu/conversations/vol43/iss1/9 Arum, Richard and Roksa, Josipa (2011) Academically Adrift: Limited Learning on College Campuses. Chicago, Illinois: University of Chicago Press. (ISBN 9780226028569)

Middle School Matters: Improving the Life Course of Black Boys. Policy Notes. Volume 20, Number 4, Winter 2012

ERIC Educational Resources Information Center

Yaffe, Deborah

2012-01-01

This issue of ETS Policy Notes (Vol. 20, No. 4) provides highlights from the symposium, "Middle School Matters: Improving the Life Course of Black Boys" held on July 23-24, 2012. The second in a series of four symposia co-sponsored by ETS and the Children's Defense Fund (CDF), the seminar examined the education and status of…

SolTrace Publications | Concentrating Solar Power | NREL

Science.gov Websites

: International Solar Energy Conference, 15-18 March 2003, Kohala Coast, Hawaii. New York: American Society of ;General Ray-Tracing Procedure," Journal of the Optical Society of America, Vol. 52, June, pp. 672-678 Brightness Profiles," Journal of Solar Energy Engineering, Vol. 124, May, pp. 198-204. Steele, C.R

76 FR 3743 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-20

... Demonstration Project, Department of the Army, Army Research, Development and Engineering Command, Armament Research, Development and Engineering Center (ARDEC); Notice #0;#0;Federal Register / Vol. 76 , No. 13... the Army, Army Research, Development and Engineering Command, Armament Research, Development and...

AC and DC electrical properties of graphene nanoplatelets reinforced epoxy syntactic foam

NASA Astrophysics Data System (ADS)

Zegeye, Ephraim; Wicker, Scott; Woldesenbet, Eyassu

2018-04-01

Benefits of employing graphene nanopletlates (GNPLs) in composite structures include mechanical as well as multifunctional properties. Understanding the impedance behavior of GNPLs reinforced syntactic foams may open new applications for syntactic foam composites. In this work, GNPLs reinforced syntactic foams were fabricated and tested for DC and AC electrical properties. Four sets of syntactic foam samples containing 0, 0.1, 0.3, and 0.5 vol% of GNPLs were fabricated and tested. Significant increase in conductivity of syntactic foams due to the addition of GNPLs was noted. AC impedance measurements indicated that the GNPLs syntactic foams become frequency dependent as the volume fraction of GNPLs increases. With addition of GNPLs, the characteristic of the syntactic foams are also observed to transition from dominant capacitive to dominant resistive behavior. This work was carried out at Southern University, Mechanical Engineering Department, Baton Rouge, LA 70802, United States of America.

Addressing Achievement Gaps: Advancing Success for Black Men in College. Policy Notes. Volume 22, Number 1, Spring 2015

ERIC Educational Resources Information Center

Yaffe, Deborah

2015-01-01

This issue of ETS Policy Notes (Vol. 22, No. 1) provides highlights from a recent symposium sponsored by ETS and the Children Defense Fund (CDF), "Advancing Success for Black Men in College," held on June 23, 2014, in Washington, DC. The symposium is part of a two-conference series: It was the 18th of ETS's "Addressing Achievement…

United States Air Force Summer Research Program -- 1993. Volume 6. Arnold Engineering Development Center, Frank J. Seiler Research Laboratory, Wilford Hall Medical Center

DTIC Science & Technology

1993-12-01

where negative charge state. The local symmetry of the Ge(I) and Ge(II) centers are CI and C2 respectively. (See also Fig. 1.) q=- 1 Ge(I) Ge(II) s p...Raymond Field: Dept. of Computer Science Dept, CEM. M•e s , PhD Laboratory: / 3200 Willow Creek Road zmbry-Riddle Aeronautical Univ Vol-Page No: 0- 0...Field: Electrical Engineering Assistant Professor, PhD Laboratory: PL/WS 2390 S . York Street University of Denver Vol-Page No: 3-35 Denver, CO 80209-0177

Sediment-Water Interactions and Contaminants in Corps of Engineers Reservoir Projects

DTIC Science & Technology

1989-07-01

Pseudomonas sp . strain NCIB 9816," Journal of Bacteriology, Vol 149, pp 948-954. Fillos, J., and Molof, A. H. 1972. "The Effect of Benthal Deposits on Oxygen...34Dimethylselenide and Dimethyltelluride Formation by a Strain of Penicillium ," Applied Microbiology, Vol 24, pp 424-429. Francis, A. J., Duxbury, J. M

NOSC/ONR Robotics Bibliography (1961-1981).

DTIC Science & Technology

1982-09-01

28, 6 Dec., 1979 @, p4 "DEFENSE EQUIPMENT FIRM TRAINS ROBOT TO PERFORM CRAFTSMAN-SKILLED TASK", Industrial Engineering, vol 13, no 5, May 1981 @, p90...1974 @, pCI-I-8 Gupton, J. A. Jr., "BUILD THIS UNICORN -i ROBOT PART I", Radio-Electronics, vol 51, no 8, 1980 @, p 3 7 ,4 1 ,76 Gupton, J. A. Jr...34BUILD THIS UNICORN -i ROBOT PART II", Radio-Electronics, vol 51, no 9, Sept. 1980 @, p55-8 Gupton, J. A., Jr., "TALK TO A TURTLE; BUILD A COMPUTER

Approach for energy saving and pollution reducing by fueling diesel engines with emulsified biosolution/ biodiesel/diesel blends.

PubMed

Lin, Yuan-Chung; Lee, Wen-Jhy; Chao, How-Ran; Wang, Shu-Li; Tsou, Tsui-Chun; Chang-Chien, Guo-Ping; Tsai, Perng-Jy

2008-05-15

The developments of both biodiesel and emulsified diesel are being driven by the need for reducing emissions from diesel engines and saving energy. Artificial chemical additives are also being used in diesel engines for increasing their combustion efficiencies. But the effects associated with the use of emulsified additive/biodiesel/diesel blends in diesel engines have never been assessed. In this research, the premium diesel fuel (PDF) was used as the reference fuel. A soy-biodiesel was selected as the test biodiesel. A biosolution made of 96.5 wt % natural organic enzyme-7F (NOE-7F) and 3.5 wt % water (NOE-7F water) was used as the fuel additive. By adding additional 1 vol % of surfactant into the fuel blend, a nanotechnology was used to form emulsified biosolution/soy-biodiesel/PDF blends for fueling the diesel engine. We found that the emulsified biosolution/soy-biodiesel/PDF blends did not separate after being kept motionless for 30 days. The above stability suggests that the above combinations are suitable for diesel engines as alternative fuels. Particularly, we found that the emulsified biosolution/soy-biodiesel/PDF blends did have the advantage in saving energy and reducing the emissions of both particulate matters (PM) and polycyclic aromatic hydrocarbons (PAHs) from diesel engines as compared with PDF, soy-biodiesel/PDF blends, and emulsified soy-biodiesel/ PDF blends. The results obtained from this study will provide useful approaches for reducing the petroleum reliance, pollution, and global warming. However, it should be noted that NO(x) emissions were not measured in the present study which warrants the need for future investigation.

Addressing Achievement Gaps: Black Male Teens--Moving to Success in the High School Years. Policy Notes. Volume 21, Number 3, Winter 2013

ERIC Educational Resources Information Center

Yaffe, Deborah

2013-01-01

This issue of ETS Policy Notes (Vol. 21, No. 3) provides highlights from the symposium, "Black Male Teens: Moving to Success in the High School Years" held on June 24, 2013, in Washington, DC. The third in a series of four symposia cosponsored by ETS and the Children's Defense Fund (CDF), the seminar examined the education and status of…

Born Lucky: The Institutional Sources behind the Third United States Army Headquarters’ Procedures in Northwest Europe, 1944-45

DTIC Science & Technology

2014-05-22

Engineer Bn., Co. B, 942nd Engineer Avn . Bn., Third US Army, 1 August 1944- 9 May 1945: Vol. I, The Operations, After Action Report (Germany...practitioners are willing to investigate the possibilities. 69 BIBLIOGRAPHY 652nd Engineer Bn., Co. B, 942nd Engineer Avn . Bn. Third US Army, 1 August

Multiple Learning Strategies Project. Small Engine Repair Service. [Regular Vocational. Vol. 2.

ERIC Educational Resources Information Center

Pitts, Jim; And Others

This instructional package is one of two designed for use by regular vocational students in the vocational area of small engine repair service. Contained in this document are forty-nine learning modules organized into eleven units: test equipment; motorcycle; engine removal and replacement; machining; tune-ups; short blocks; storage; filling out…

Military Space Mission Design and Analysis in a Multi-Body Environment: An Investigation of High-Altitude Orbits as Alternative Transfer Paths, Parking Orbits for Reconstitution, and Unconventional Mission Orbits

DTIC Science & Technology

2017-03-23

Dynamical Astronomy , vol. 90, no. January 2004, pp. 165–178, 2004. [Online]. Available: https://www.researchgate.net/publication/ 225231299 On The...Celestial Mechanics and Dynamical Astronomy , vol. 32, no. 1, pp. 53–71, 1984. [Online]. Available: https://engineering.purdue.edu/people/kathleen.howell

Applied Computational Electromagnetics Society Journal. Volume 13, No. 1

DTIC Science & Technology

1998-03-01

APPLIED COMPUTATIONAL ELECTROMAGNETICS SOCIETY JOURNAL March 1998 Vol. 13 No. 1 ISSN 1054-4887 MBTMBUTION BTATCICEHt 1 ’ | Appcofd for...public rdtooMf DUrtrlbnttoo Unlimited 1 19980709 083 GENERAL PURPOSE AND SCOPE. The Applied Computational Electromagnetics Society Journal...SOCIETY Journal March 1998 Vol. 13 No. 1 ISSN 1054-4887 The ACES Journal is abstracted in INSPEC, in Engineering Index, and in DTIC. The second

Complexity Measure for the Prototype System Description Language (PSDL)

DTIC Science & Technology

2002-06-01

Albrecht, A. and Gaffney , J., Software Function Source Lines of Code and Development Effort Prediction, IEEE Transactions on Software Engineering...Through Meausrement”; Proceedings of the IEEE, Vol. 77, No. 4, April 89. Schach, Stephen, R., Software Engineering, Second Edition, IRWIN, Burr Ridge

76 FR 44245 - Special Conditions: Gulfstream Model GVI Airplane; Limit Engine Torque Loads for Sudden Engine...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-25

... Conditions No. 25-441-SC] Special Conditions: Gulfstream Model GVI Airplane; Limit Engine Torque Loads for... transient dynamic loads resulting from: (a) The loss of any fan, compressor, or turbine blade; and (b...;Federal Register / Vol. 76, No. 142 / Monday, July 25, 2011 / Rules and Regulations#0;#0; [[Page 44245...

Multiple Learning Strategies Project. Small Engine Repair Service. Regular Vocational. [Vol. 1.

ERIC Educational Resources Information Center

Pitts, Jim; And Others

This instructional package is one of two designed for use by regular vocational students in the vocational area of small engine repair service. Contained in this document are forty-four learning modules organized into ten units: engine block; air cleaner; starters; fuel tanks; lines, filters, and pumps; carburetors; electrical; magneto systems;…

On Correlated Failures in Survivable Storage Systems

DTIC Science & Technology

2002-05-01

Littlewood, D.R. Miller, “Conceptual modeling of coincident failures in multiversion software”, IEEE Transactions on Software Engineering, Volume: 15 Issue...Recovery in Multiversion Software”. IEEE Transaction on Software Engineering, Vol. 16 No.3, March 1990 [Plank1997] J. Plank “A tutorial on Reed-Solomon

Navy MANTECH Program Fiscal Year 2002 Annual Report

DTIC Science & Technology

2003-04-01

Journal of Materials Engineering and Performance, Vol. 10, No 6. K. Kannan and J. J. Valencia Field-Scale Demonstration of Electrocoagulation and...Naval Air Systems Command / NADEP CP $741,000 Abrasive Flow Machining (coatings removal ) evaluation for repair of F404 turbine blade engine

IEEE transactions on vehicular technology, Vol. Vt-19, No. 1

DOT National Transportation Integrated Search

1970-02-01

This special issue deals not only with integrated electronic systems but with the technology that is required to achieve successful operation. To place some of the 1969 dimensions of the highway system in the United States in proper focus, we note th...

Prognostic Health Management of DoD Assets

DTIC Science & Technology

2015-06-01

34Acoustic emission for monitoring the mechanical behaviour of natural fibre composites: a literature review," Composites Part A: Applied Science and...34Acoustic emission of debonding between fibre and matrix to evaluate local adhesion," Composites Science and Technology, vol. 63, pp. 2155-2162, 2003...classification in carbon fibre composites using acoustic emission: A comparison of three techniques," Composites Part B: Engineering, vol. 68, pp. 424-430, 1

Optimization of suitable ethanol blend ratio for motorcycle engine using response surface method.

PubMed

Chen, Yu-Liang; Chen, Suming; Tsai, Jin-Ming; Tsai, Chao-Yin; Fang, Hsin-Hsiung; Yang, I-Chang; Liu, Sen-Yuan

2012-01-01

In view of energy shortage and air pollution, ethanol-gasoline blended fuel used for motorcycle engine was studied in this work. The emissions of carbon monoxide (CO), nitrogen oxides (NO(X)) and engine performance of a 125 cc four-stroke motorcycle engine with original carburetor using ethanol-gasoline fuels were investigated. The model of three-variable Box Behnken design (BBD) was used for experimental design, the ethanol blend ratios were prepared at 0, 10, 20 vol%; the speeds of motorcycle were selected as 30, 45, 60 km/h; and the throttle positions were set at 30, 60, 90 %. Both engine performance and air pollutant emissions were then analyzed by response surface method (RSM) to yield optimum operation parameters for tolerable pollutant emissions and maximum engine performance. The RSM optimization analysis indicated that the most suitable ethanol-gasoline blended ratio was found at the range of 3.92-4.12 vol% to yield a comparable fuel conversion efficiency, while considerable reductions of exhaust pollutant emissions of CO (-29 %) and NO(X) (-12 %) when compared to pure gasoline fuel. This study demonstrated low ethanol-gasoline blended fuels could be used in motorcycle carburetor engines without any modification to keep engine power while reducing exhaust pollutants.

Multiple Learning Strategies Project. Small Engine Repair Service. Low Reader-Educable Mentally Impaired. [Vol. 1.

ERIC Educational Resources Information Center

Pitts, Jim; And Others

This instructional package, one of two designed for low reader-educable mentally impaired students, focuses on the vocational area of small engine repair service. (Low readers are identified as those reading at a 3-6 grade level.) Contained in this document are forty-three learning modules organized into nine units: engine block; air cleaner;…

Training in software used by practising engineers should be included in university curricula

NASA Astrophysics Data System (ADS)

Silveira, A.; Perdigones, A.; García, J. L.

2009-04-01

Deally, an engineering education should prepare students, i.e., emerging engineers, to use problem-solving processes that synergistically combine creativity and imagination with rigour and discipline. Recently, pressures on curricula have resulted in the development of software-specific courses, often to the detriment of the understanding of theory [1]. However, it is also true that there is a demand for information technology courses by students other than computer science majors [2]. The emphasis on training engineers may be best placed on answering the needs of industry; indeed, many proposals are now being made to try to reduce the gap between the educational and industrial communities [3]. Training in the use of certain computer programs may be one way of better preparing engineering undergraduates for eventual employment in industry. However, industry's needs in this respect must first be known. The aim of this work was to determine which computer programs are used by practising agricultural engineers with the aim of incorporating training in their use into our department's teaching curriculum. The results showed that 72% of their working hours involved the use computer programs. The software packages most commonly used were Microsoft Office (used by 79% of respondents) and CAD (56%), as well as budgeting (27%), statistical (21%), engineering (15%) and GIS (13%) programs. As a result of this survey our university department opened an additional computer suite in order to provide students practical experience in the use of Microsoft Excel, budgeting and engineering software. The results of this survey underline the importance of computer software training in this and perhaps other fields of engineering. [1] D. J. Moore, and D. R. Voltmer, "Curriculum for an engineering renaissance," IEEE Trans. Educ., vol. 46, pp. 452-455, Nov. 2003. [2] N. Kock, R. Aiken, and C. Sandas, "Using complex IT in specific domains: developing and assessing a course for nonmajors," IEEE Trans. Educ., vol. 45, pp. 50- 56, Feb. 2002. [3] I. Vélez, and J. F. Sevillano, "A course to train digital hardware designers for industry," IEEE Trans. Educ., vol. 50, pp. 236-243, Aug. 2007. Acknowledgement: This work was supported in part by the Universidad Politécnica de Madrid, Spain.

Motor carrier case study evaluation report : appendix C, Vol. 2 : case study field notes, the Crescent Evaluation

DOT National Transportation Integrated Search

1994-02-01

The Crescent Project element of the HELP Program is a bi-national multi-jurisdictional : cooperative research and demonstration initiative involving the public and private sectors in an : application of advanced technologies for the creation of an in...

Worldwide Engagement for Digitizing Biocollections (WeDigBio): The Biocollections Community's Citizen-Science Space on the Calendar.

PubMed

Ellwood, Elizabeth R; Kimberly, Paul; Guralnick, Robert; Flemons, Paul; Love, Kevin; Ellis, Shari; Allen, Julie M; Best, Jason H; Carter, Richard; Chagnoux, Simon; Costello, Robert; Denslow, Michael W; Dunckel, Betty A; Ferriter, Meghan M; Gilbert, Edward E; Goforth, Christine; Groom, Quentin; Krimmel, Erica R; LaFrance, Raphael; Martinec, Joann Lacey; Miller, Andrew N; Minnaert-Grote, Jamie; Nash, Thomas; Oboyski, Peter; Paul, Deborah L; Pearson, Katelin D; Pentcheff, N Dean; Roberts, Mari A; Seltzer, Carrie E; Soltis, Pamela S; Stephens, Rhiannon; Sweeney, Patrick W; von Konrat, Matt; Wall, Adam; Wetzer, Regina; Zimmerman, Charles; Mast, Austin R

2018-02-01

The digitization of biocollections is a critical task with direct implications for the global community who use the data for research and education. Recent innovations to involve citizen scientists in digitization increase awareness of the value of biodiversity specimens; advance science, technology, engineering, and math literacy; and build sustainability for digitization. In support of these activities, we launched the first global citizen-science event focused on the digitization of biodiversity specimens: Worldwide Engagement for Digitizing Biocollections (WeDigBio). During the inaugural 2015 event, 21 sites hosted events where citizen scientists transcribed specimen labels via online platforms (DigiVol, Les Herbonautes, Notes from Nature, the Smithsonian Institution's Transcription Center, and Symbiota). Many citizen scientists also contributed off-site. In total, thousands of citizen scientists around the world completed over 50,000 transcription tasks. Here, we present the process of organizing an international citizen-science event, an analysis of the event's effectiveness, and future directions-content now foundational to the growing WeDigBio event.

Little Joe Model Mercury Project

NASA Image and Video Library

1959-06-26

Publicity photograph of a technician measuring a wind tunnel model of the Little Joe test vehicle. Joseph Shortal noted that (vol. 3, p. 29): The largest project at Wallops in support of Mercury was the Little Joe project, designed to qualify the abort-escape system under flight conditions. James Hansen (p. 47) writes: STG engineers Max Faget and Paul Purser, then of Langley's PARD, had conceived Little Joe as a space capsule test vehicle even before the establishment of NASA and the formation of the STG. Girlruth understood the importance of the Little Joe tests: We had to be sure there were no serious performance and operational problems that we had simply not thought of in such a new and radical type of flight vehicle. -- Published in James R. Hansen, Spaceflight Revolution: NASA Langley Research Center From Sputnik to Apollo, (Washington: NASA, 1995), p. 47 Joseph A. Shortal, History of Wallops Station: Origins and Activities Through 1949, (Wallops Island, VA: National Aeronautics and Space Administration, Wallops Station, nd), Comment Edition.

Development of a Spray System for an Unmanned Aerial Vehicle Platform

DTIC Science & Technology

2008-09-01

Applied Engineering in Agriculture Vol. 25(6): 803‐809 2009 American Society of Agricultural and Biological Engineers ISSN 0883-8542 803...Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 804 APPLIED ENGINEERING IN AGRICULTURE non‐chemical or least toxic chemical techniques...and electrically shielded (fig. 4). 806 APPLIED ENGINEERING IN AGRICULTURE Figure 2. Computer‐aided model and design of the tank with baffles, and

Functionally Graded Shape Memory Alloy Composites Optimized for Passive Vibration Control

DTIC Science & Technology

2006-11-20

Nitinol , it is anticipated that the wire can only experience an incomplete hysteresis. 2.1. SMA wires in sleeves continuously bonded to the plate...Gilheany, J. 1995. Control of the natural frequencies of nitinol -reinforced composite beams, Journal of Sound and Vibrations, Vol. 185, 171-185. 3 Ro...J., and Baz, A., 1995. Nitinol -reinforced plates: Part III, Dynamic characteristics, Composites Engineering, Vol. 5, 91-106. 4 Epps, J and Chandra

Center for Advanced Sensors Year Two Funding (FY2006)

DTIC Science & Technology

2008-02-26

Cheong, and F. Zhao (2005) "Semantics-Based Optimization Across Uncoordinated Tasks in Networked Embedded Systems," Proceedings of the 5th ACM Conference...analysis," Optical Engineering, vol. 46, 116401, 2007. R.L. Espinola, E.L. Jacobs, C.E. Halford, D.H. Tofsted and R. Vollmerhausen, "Modeling...the target acquisition performance of active imaging systems," Optics Express, vol. 15, March, 2007. C.E. Halford, A.L. Robinson, E.L. Jacobs and

Coherent Change Detection: Theoretical Description and Experimental Results

DTIC Science & Technology

2006-08-01

373–376. 47. S. M. Kay, Fundamentals of statistic signal processing. Vol 2. Detection theory. Pren- tice Hall, 1998. 48. H . Anton and C . Rorres ...Proceedings of the 1998 International Geoscience and Remote Sensing Symposium, vol. 5, 1998, pp. 2451–2453. 9. C . V. Jakowatz Jr., D. E. Wahl, P. H . Eichel...dissertation, School of Electrical and Electronic Engineering, The University of Adelaide, 2004. 20. C . H . Gierull, Statistics of SAR interferograms

Multiple Learning Strategies Project. Building Maintenance & Engineering. Regular Vocational. [Vol. 2.

ERIC Educational Resources Information Center

Smith, Dwight; And Others

This instructional package is one of two designed for regular vocational students in the vocational area of building maintenance and engineering. The fifty-three learning modules are organized into ten units: office cleaning; grounds; sanitation; boiler maintenance and operation; power and hand tools; cabinet construction; repair of damaged…

EDITORIAL: The present and future

NASA Astrophysics Data System (ADS)

Durand, Dominique M.

2006-09-01

Neural engineering has grown substantially in the last few years and it is time to review the progress of the first journal in this field. Journal of Neural Engineering (JNE) is a quarterly publication that started in 2004. The journal is now in its third volume and eleven issues, consisting of 114 articles in total, have been published since its launch. The editorial processing times have been kept to a minimum, the receipt to first decision time is 41 days, on average, and the time from receipt to publication has been maintained below three months. It is also worth noting that it is free to publish in Journal of Neural Engineering—there are no author fees—and once published the articles are free online for the first month. The journal has been listed in Pubmed® since 2005 and has been accepted by ISI® in 2006. Who is reading Journal of Neural Engineering? The number of readers of JNE has increased significantly from 8050 full-text downloads in 2004 to 14 900 in 2005 and the first seven months of 2006 have already seen 12 800 downloads. The top users in 2005 were the Microsoft Corporation, Stanford University and the University of Michigan. The list of top ten users also includes non-US institutions: University of Toronto, University of Tokyo, Hong Kong Polytechnic, National Library of China and University College London, reflecting the international flavor of the journal. What are the hot topics in neural engineering? Based on the number of downloads and citations for 2004-2005, the top three topics are: (1) Brain-computer interfaces (2) Visual prostheses (3) Neural modelling Several other topics such as microelectrode arrays, neural signal processing, neural dynamics and neural circuit engineering are also in the top ten. Where are Journal of Neural Engineering articles cited? JNE articles have reached a wide audience and have been cited in of some of the best journals in physiology and neuroscience such as Nature Neuroscience, Journal of Neuroscience, Trends in Neuroscience, Journal of Physiology, Proceedings of the National Academy of Science as well as in engineering and physics journals such as Annals of Biomedical Engineering, Physical Review Letters and IEEE Transactions on Biomedical Engineering. However, the number of citations in clinical journals is limited. What is special about Journal of Neural Engineering? JNE has published two special issues: (1) The Eye and the Chip (visual prostheses) (vol. 2, (1), 2005) and (2) Sensory Integration: Role of Internal Models (vol. 2, (3), 2005). These special issues have attracted a lot of attention based on the number of article downloads. JNE also publishes tutorials intended to provide background information on specific topics such as classification, sensory substitution and cortical neural prosthetics. A series of tutorials from the 3rd Neuro-IT and Neuroengineering Summer School has been published with the first appearing in vol. 2 (4), 2005. What is in the future for Journal of Neural Engineering? The goal of any journal should be to provide a particular field with the best venue for scientists and engineers to make their work available and noticeable to the rest of the community. In particular, attracting a strong readership base and high quality manuscripts should be the first priority. Providing accurate, reliable and speedy reviews should be the next. With an international board of experts in the field of neural engineering, a solid base of reviewers, readers and contributors, JNE is in a strong position to continue to serve the neural engineering community. However, this is still a small community and growth is essential for continued success in this area. There are two areas of expansion of great interest for the field of neural engineering currently poised between basic science on one hand and clinical implementation on the other: translational neuroscience and therapeutic neural engineering. We should strive to bridge the gap between basic neuroscience, clinical science and engineering by attracting contributions from neuroscientists and clinicians with an interest in neural engineering. I urge members of the neural engineering community to encourage their colleagues in these areas to consider JNE for publication of those manuscripts at the interface with neuroscience and engineering. I would like to take this opportunity to acknowledge the work of the board members, the reviewers of the articles and the staff at the Institute of Physics Publishing for their contribution to the Journal of Neural Engineering.

Buildings for Education, Vol. 2, No. 2.

ERIC Educational Resources Information Center

Asian Regional Inst. for School Building Research, Colombo (Sri Lanka).

The activities of the Asian Regional Institute for School Building Research are described (studies conducted, contracts, development group work). Technical notes are presented concerning high-rise school buildings in Asian urban areas and related cost implications; the following factors are considered--(1) demand for space in urban areas, (2)…

Cultural Resources Investigation at the Lake Winnibigoshish Dam Site - 21 IC 4,

DTIC Science & Technology

1978-01-01

56 Spring Lake, Minnesota, archaeology and ethnohistory 1959-76 Minnesota, North Dakota, annual archaeological research 1967 Paleolithic site survey...34Interesting Archaeological Reading." Minnesota Archaeologist, Vol. 32, No’s. 1 and 2, pp. 113-114. "Notes on a Paleolithic Site Survey in Pakistan

Arabism and Islam: Stateless Nations and Nationless States

DTIC Science & Technology

1990-07-01

Notes 1. NationalGeographic, vol. 119, no. 1 (January 1961), p. 84. 2. Michel Foucault , quoted in translation from Keith Michael Baker, "Memory...Islamic Jihad released a photograph of the corpse o f French hostage Michel Seurat, a respected scholar of the Arab-Muslim world. Terry Ander

COED Transactions, Vol. X, No. 4, April 1978. An Experience in Teaching "COBOL?" to Graduate Engineers.

ERIC Educational Resources Information Center

Bremmer, Dale; Childs, Bart

This document discusses the importance of computing knowledge and experience in the techniques of fast data retrieval for today's engineer. It describes a course designed to teach the engineer the COBOL Language structure. One of the projects of the course, a report generator (REGE) written in COBOL which is used to alter, sort and print selected…

Designing Secure Systems on Reconfigurable Hardware

DTIC Science & Technology

2008-07-01

Jeff White Department of Electrical and Computer Engineering University of California, Santa Barbara Santa Barbara, CA 93106 {nick callegari,valamehr...ece.ucsb.edu, jdwhite08@engineering.ucsb.edu Ryan Kastner Department of Computer Science and Engineering University of California, San Diego La Jolla...Transactions on Design Automation of Electronic Systems (TODAES), Vol. 13, No. 3, July 2008, 1-24 14. ABSTRACT see report 15. SUBJECT TERMS 16

Biodegradable Microfluidic Scaffolds for Vascular Tissue Engineering

DTIC Science & Technology

2005-01-01

Engineering DISTRIBUTION: Approved for public release, distribution unlimited This paper is part of the following report: TITLE: Materials Research...Society Symposium Proceedings. Volume 845, 2005. Nanoscale Materials Science in Biology and Medicine, Held in Boston, MA on 28 November-2 December 2004...Symp. Proc. Vol. 845 © 2005 Materials Research Society AA1.6 Biodegradable Microfluidic Scaffolds for Vascular Tissue Engineering C. J. Bettinger" 3

Turbulent Transport at High Reynolds Numbers in an Inertial Confinement Fusion Context

DTIC Science & Technology

2014-09-01

Department of Applied Mathematics and Statistics, Stony Brook University, Stony Brook, NY 11794 P . Rao1 Department of Applied Mathematics and Statistics...scales, 1Corresponding author. Contributed by the Fluids Engineering Division of ASME for publication in the JOURNAL OF FLUIDS ENGINEERING...Engineering SEPTEMBER 2014, Vol. 136 / 091206-1Copyright VC 2014 by ASME Downloaded From: http://fluidsengineering.asmedigitalcollection.asme.org/ on

View forward in starboard engine room, compartment C1. Note starboard ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View forward in starboard engine room, compartment C-1. Note starboard engine thrust bearing in open housing at bottom center of photograph; note main circulation pump, main steam chest at top of photo. (065) - USS Olympia, Penn's Landing, 211 South Columbus Boulevard, Philadelphia, Philadelphia County, PA

Flow Quality for Turbine Engine Loads Simulator (TELS) Facility

DTIC Science & Technology

1980-06-01

2.2 GAS INGESTION A mathematical simulation of the turbojet engine and jet deflector was formulated to estimate the severity of the recirculating...3. Swain. R. L. and Mitchell, J. G. "’Smlulatlon of Turbine Engine Operational Loads." Journal of Aircraft Vol. 15, No. 6, June 1978• 4. Ryan, J...3 AEDC-TR-79-83 ~...~ i ,i g - Flow Quality for Turbine Engine Loads Simulator (TELS) Facility R..I. Schulz ARO, Inc. June 1980

Aircraft Position Measurement Using Laser Beacon Optics.

DTIC Science & Technology

1981-01-01

8217Comparison of Solar Concentrators .’ Solar Energy, Vol. 10, p. 93, 1976. 7. Winston , R., ’Light Collection Within the Framework of Goemetrical Optics ...8217 J. Optical Society of Am., Vol. 60, p. 245, 1970. 8. Welford, W. T., tics of Nonimaging Concentrators . New York, Academic Press, T978. 9. Bracewell...helicopter pilot and the flight engineer on board the YO-3A. This thesis will concentrate on the development of the laser beacon, the detector optics

Differential Multiscale Modeling of Chemically Complex Materials under Heavy Deformation: Biological, Bioinspired and Synthetic Hierarchical Materials

DTIC Science & Technology

2010-06-01

Buehler, “Meso- Origami : Folding Multilayer Graphene Sheets”, Applied Physics Letters, Vol. 95, paper #: 123121, 2009 D. Sen and M.J. Buehler, “Size and... geometry effects on flow stress in bioinspired de novo metal-matrix nanocomposites”, Advanced Engineering Materials, Vol. 11(10), pp. 774-781, 2009...behavior is recovered. Second, a subset of all geometries shows the inverse banana curve behavior. Interestingly, only 2% of all structures give the

Precision Machining Application and Technology: An Overview and Perspective.

DTIC Science & Technology

1983-08-24

diamond turning lathes are being used to produce computer discs. Bryant Symons, an English firm, has reported diamond turning an aluminum computer disk at...34 Precision Engineering, Vol. 5(2), Guildford, Engl nd, July 1983. Watt, G., " Lathe for Generation of Spherical -arfaces of Revolution," given to Optical...Precision CNC Diamond Turning Machine," Annuals of the CIRP, Vol. 31/1, p 409, 1982. 8. Bryant Simmons Product Brochur-, "Ultra Precision Oiamond Turning

Emission factors and congener-specific characterization of PCDD/Fs, PCBs, PBDD/Fs and PBDEs from an off-road diesel engine using waste cooking oil-based biodiesel blends.

PubMed

Chen, Shui-Jen; Tsai, Jen-Hsiung; Chang-Chien, Guo-Ping; Huang, Kuo-Lin; Wang, Lin-Chi; Lin, Wen-Yinn; Lin, Chih-Chung; Yeh, C Kuei-Jyum

2017-10-05

Few studies have been performed up to now on the emission factors and congener profiles of persistent organic pollutants (POPs) emitted from off-road diesel engines. This investigation elucidates the emission factors and congener profiles of various POPs, namely polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyl (PCBs), polybrominated dibenzo-p-dioxins and polybrominated dibenzofurans (PBDD/Fs) and polybrominated diphenyl ethers (PBDEs), in the exhausts of a diesel generator fueled with different waste cooking oil-based biodiesel (WCO-based biodiesel) blends. The PCDD/Fs contributed 87.2% of total dioxin-like toxicity (PCDD/Fs+PCBs+PBDD/Fs) in the exhaust, while the PCBs and PBDD/Fs only contributed 8.2% and 4.6%, respectively. Compared with petroleum diesel, B20 (20vol% WCO-based biodiesel+80vol% diesel) reduced total toxicity by 46.5% for PCDD/Fs, 47.1% for PCBs, and 24.5% for PBDD/Fs, while B40 (40vol% WCO-based biodiesel+60vol% diesel) reduced it by 89.5% for PCDD/Fs, 57.1% for PCBs, and 63.2% for PBDD/Fs in POP emission factors. The use of WCO-based biodiesel not only solves the problem of waste oil disposal, but also lowers POP emissions from diesel generators. Copyright © 2017 Elsevier B.V. All rights reserved.

Engineering Aid 3 & 2, Vol. 1. Rate Training Manual and Nonresident Career Course.

ERIC Educational Resources Information Center

Naval Education and Training Command, Washington, DC.

Designed for individual study and not formal classroom instruction, this rate training manual provides subject matter that relates directly to the occupational qualifications of the Engineering Aid (EA) rating. This eight-chapter volume focuses on administrative matters, mathematics, and basic drafting. Chapter 1 discusses the scope of the EA…

A Model for On-Offshore Sediment Transport in the Surfzone.

DTIC Science & Technology

1982-12-01

34 Journal of Waterway Port, Coastal and Ocean Engineering, American Society of Civil Engineers, vol 108, no. WW2 , pp 163-179. Short, A. D. (1978) "Wave...PWO, Mayport FL; Utilities Engr Off. Rota Spain NAVTECHTRACEN SCE. Pensacola FL NAVWPNCEN Code 2636 China Lake; Code 3803 China Lake, CA NAVWPNSTA

Multiple Learning Strategies Project. Building Maintenance & Engineering. Low Reader. [Vol. 2.

ERIC Educational Resources Information Center

Steinberg, A.; And Others

This instructional package is one of two designed for low reader students (those reading at grade level 3-6) in the vocational area of building maintenance and engineering. The forty-four learning modules are organized into eleven units: chalkboards; carpet care; office cleaning; grounds; sanitation; boiler maintenance and operation; power and…

Multiple Learning Strategies Project. Building Maintenance & Engineering. Educable Mentally Impaired. [Vol. 3.

ERIC Educational Resources Information Center

Steinberg, Alan; And Others

This instructional package is one of three designed for educable mentally impaired students in the vocational area of building maintenance and engineering. The thirty-one learning modules are organized into nine units: grounds; sanitation; boiler maintenance and operation; power and hand tools; cabinet construction; repair of damaged furniture;…

Ocean Engineering Studies Compiled 1991. Volume 10. External Pressure Housing - Concrete

DTIC Science & Technology

1991-01-01

Hafsklold Ing. F. Selmer AS Anton Brandtzaeg Post Office Box 256 Professor of Construction & Harbour Oslo, Norway Engineering Norwegian Technical University...1984, pp 364-411. 50. 0. Olsen , "Implosion analysis of concrete cylinders under hydro- static pressure," ACI, vol 75, no. 3, Mar 1973, pp 82-85. 51. K.P

Artificial Intelligence Software Acquisition Program. Volume 2.

DTIC Science & Technology

1987-12-01

34Architect tire prototyping in the software engineering environment". 1BBA! .’ qtins Jo urnal, vol. 23, No. 1, p. 4-18, 1984. 3v Boehmi, Barry W_. Gray...on Artificial Intelligence, Sponsored by AAAI, December 1986. ..- ~[31] Pressman , Roger S. "Software Engineering: A Practitioner’s Approach". McGraw

Engineering Aid 3 & 2, Vol. 2. Rate Training Manual.

ERIC Educational Resources Information Center

Bernal, Benito C., Jr.

Designed for individual study and not formal classroom instruction, this rate training manual provides subject matter that relates directly to the occupational qualifications of the Engineering Aid (EA) rating. This volume contains 10 chapters which deal with: (1) wood and light frame structures (examining the uses, kinds, sizes, and grades of…

Monte Carlo calculations of the incineration of plutonium and minor actinides of laser fusion inertial confinement fusion fission energy (LIFE) engine

NASA Astrophysics Data System (ADS)

Adem, ACIR; Eşref, BAYSAL

2018-07-01

In this paper, neutronic analysis in a laser fusion inertial confinement fusion fission energy (LIFE) engine fuelled plutonium and minor actinides using a MCNP codes was investigated. LIFE engine fuel zone contained 10 vol% TRISO particles and 90 vol% natural lithium coolant mixture. TRISO fuel compositions have Mod①: reactor grade plutonium (RG-Pu), Mod②: weapon grade plutonium (WG-Pu) and Mod③: minor actinides (MAs). Tritium breeding ratios (TBR) were computed as 1.52, 1.62 and 1.46 for Mod①, Mod② and Mod③, respectively. The operation period was computed as ∼21 years when the reference TBR > 1.05 for a self-sustained reactor for all investigated cases. Blanket energy multiplication values (M) were calculated as 4.18, 4.95 and 3.75 for Mod①, Mod② and Mod③, respectively. The burnup (BU) values were obtained as ∼1230, ∼1550 and ∼1060 GWd tM–1, respectively. As a result, the higher BU were provided with using TRISO particles for all cases in LIFE engine.

Durability Testing of Biomass Based Oxygenated Fuel Components in a Compression Ignition Engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ratcliff, Matthew A; McCormick, Robert L; Baumgardner, Marc E.

Blending cellulosic biofuels with traditional petroleum-derived fuels results in transportation fuels with reduced carbon footprints. Many cellulosic fuels rely on processing methods that produce mixtures of oxygenates which must be upgraded before blending with traditional fuels. Complete oxygenate removal is energy-intensive and it is likely that such biofuel blends will necessarily contain some oxygen content to be economically viable. Previous work by our group indicated that diesel fuel blends with low levels (<4%-vol) of oxygenates resulted in minimal negative effects on short-term engine performance and emissions. However, little is known about the long-term effects of these compounds on engine durabilitymore » issues such as the impact on fuel injection, in-cylinder carbon buildup, and engine oil degradation. In this study, four of the oxygenated components previously tested were blended at 4%-vol in diesel fuel and tested with a durability protocol devised for this work consisting of 200 hrs of testing in a stationary, single-cylinder, Yanmar diesel engine operating at constant load. Oil samples, injector spray patterns, and carbon buildup from the injector and cylinder surfaces were analyzed. It was found that, at the levels tested, these fuels had minimal impact on the overall engine operation, which is consistent with our previous findings.« less

GLYCOL DEHYDRATOR BTEX AND VOC EMISSIONS TESTING RESULTS AT TWO UNITS IN TEXAS AND LOUISIANA VOL. II: APPENDICES

EPA Science Inventory

The report gives results of the collection of emissions test data st two triethylene glycol units to provide data for the comparison to GRI-GLYCalc, a computer program developed to estimate emissions from glycol dehydrators. [NOTE: Glycol dehydrators are used in the natural gas i...

GLYCOL DEHYDRATOR BTEX AND VOC EMISSIONS TESTING RESULTS AT TWO UNITS IN TEXAS AND LOUISIANA VOL. I: TECHNICAL REPORT

EPA Science Inventory

The report gives results of the collection of emissions tests data at two triethylene glycol units to provide data for comparison to GRI-GLYCalc, a computer program developed to estimate emissions from glycol dehydrators. (NOTE: Glycol dehydrators are used in the natural gas indu...

Measuring the Effectiveness of the Industrial Modernization Incentives Program (IMIP).

DTIC Science & Technology

1985-09-01

nebulous to accurately measure. It is of interest to note that if "degree of improved readiness" could be defined and quantified, 100 percent of the...Make the Turtle Run?" Government Executive, Vol 14: 18-21 (October 1982). 19. Kluter, Major Eugene E., USAF. Producing More For Less: A Guide For

Notes on Search, Detection and Localization Modeling. Revision 4

DTIC Science & Technology

1990-10-01

2, --- , k where the subregions are relabeled so that the following order relation holds: pi/6 1 > p 2!6 2 > ... > pr65 and where k is chosen so... Interfaces ," Operations Research, Vol. 19, No.3, pp 559-586, 1971. 15. Coggins, P.B., "Detection Probability Computations for Random Search of an

Training and Development Publications. Vol. 13, No. 5.

ERIC Educational Resources Information Center

International Labour Office, Geneva (Switzerland).

Abstracts of material covering a variety of topics regarding vocational and labor development throughout the world are presented in the fifth dispatch. Noted, in particular, are publications regarding management and relations between school and the world of work. The first section, News in Brief, contains 34 items from around the world under the…

Adult Continuing Education and Human Resource Development: Present Competitors, Potential Partners

ERIC Educational Resources Information Center

Smith, Douglas H.

2013-01-01

"Author's Note": In May 1989, this article was published in "Livelong Learning," the monthly practitioner journal of the American Association for Adult and Continuing Education (Vol. 12, No. 7, pp. 13-17). Now viewed as a period reference article, it presents the relationship of adult and continuing education (ACE) and…

Photocopy: Composite Map of Crossing Site by Daniel J. Mordell ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy: Composite Map of Crossing Site by Daniel J. Mordell from Canal Society of New York State. Bottoming Out: Useful and Interesting Notes Collected for Members of the Canal Society of New York State. Vol. 18-19. Syracuse, 1962. - Erie Canal (Enlarged), Schoharie Creek Aqueduct, Spanning Schoharie Creek, Fort Hunter, Montgomery County, NY

Aeroacoustics of Flight Vehicles: Theory and Practice. Volume 1. Noise Sources

DTIC Science & Technology

1991-08-01

243. 62 Brown, Garry L.; and Roshko, Anatol On Density Effects and Large Structure in Turbulent Mixing Layers J. Fluid Aeci, vol 64, pt 4, July 24, 1974...Structure in Jet Turbulence. J. Fluid Mech., vol. 48, pt. 3, Aug. 16, 1971, pp. 547-591. 2 Brown, Garry L., and Roshko, Anatol On Density Effects and Large...depending on such things as engine power setting and combustor and turbine design considerations. The dominant frequencies associated with both combustion

Proceedings of Symposium on Energy Engineering in the 21st Century (SEE 2000). Volume Two

DTIC Science & Technology

2000-01-13

International Journal of Hybrid Microelectronics, Vol.7, pp. 1-9 (1984). 2. T. Burd, "CPU information and system performance summary," Internet site, Http...and P. C. Wayner, "Evaporation from a Porous Flow Control Element on a Porous Heat Source", International Journal of Heat and Mass Transfer, Vol.16...28. I. M. N. A. Fareleira, S. F. Y. Li and W. A. Wakeham, International Journal of Thermophvsics, v. 10, pp. 1041 (1981). 29. Y. Wada, Y. Nagasaka

Engine Tests Using High-Sulfur Diesel Fuel

DTIC Science & Technology

1980-09-01

0.5 wt% sulfur because "too high a sulfur content results in excessive cylinder wear due to acid build-up in the lubricating oil" (Ref 1). Previous...that the addition of 0.3 vol% of an organo-zinc complex fuel additive (zinc naphthenate ) to high-sulfur diesel fuel was an effective means of...disulfide. Addition of 0.3 vol% zinc naphthenate to high- sulfur fuel increased the fuel ash to 0.035 wt% while the cetane number re- mained unchanged

Flow Regime Identification of Horizontal Two Phase Refrigerant R-134a Flow Using Neural Networks (Postprint)

DTIC Science & Technology

2013-11-01

Flows in Microchannels ," Heat Transfer Engineering, Vol. 27, No. 9, 2006, pp. 4-19. 2Kandlikar, S. G., " Heat Transfer Mechanisms During Flow...Boiling in Microchannels ," Journal of Heat Transfer , Vol. 126, No. 1, 2004, pp. 8-16. 3Kreitzer, P. J., Byrd, L., and Willebrand, B. J., "Initial...an integral aspect of modeling two phase flows as most pressure drop and heat transfer correlations rely on a priori knowledge of the flow regime for

Wave Data Acquisition and Hindcast for Saginaw Bay, Michigan.

DTIC Science & Technology

1983-06-01

Bretschneider (1952) and Mitsuyasu and Kimura (1965) for f the peak fre- %m quency (where fm = f g/U) while the total energy decay rate follows that mm...Spectra of Wind-Generated Gravity Waves," Journal of Physical Oceanography, Vol 5, pp 410-420. Mitsuyasu, Hisashi . 1968. "On the Growth of the...8217 . , / . - . ’ -’ -. .. ’ . .. _..- -’ - Mitsuyasu, Hisashi , and Kirmura, Hisao. 1965. "Wind Wave in Decay Area," Coastal Engineering in Japan, Vol 8, pp 221-35. Ou, Shan-Hwei. 1980 (Sep

Thermal Management of Vehicle Electronic Payloads Using Nanofluids and Thermoelectric Devices--Modeling and Analysis (PREPRINT)

DTIC Science & Technology

2011-03-01

Transfer Engineering, Vol. 30, No. 14, pp. 1136-1150. Chang, Y.W., Chang, C.C., Ke, M.T. and Chen, S.L. (2009) ’ Thermoelectric air-cooling module for...2005) ’An assessment of module cooling enhancement with thermoelectric coolers’, Journal of Heat Transfer-Transactions of the Asme, Vol. 127, No. 1, pp...nanoparticle out outer loop p nanoparticle TEC thermoelectric module w water UNCLASSIFIED UNCLASSIFIED Page 23 of 28 Tables Table 1

PROGRAM ASTEC (ADVANCED SOLAR TURBO ELECTRIC CONCEPT). PART IV. SOLAR COLLECTOR DEVELOPMENT SUPPORT TASKS. VOL. VII. ENGINEERING DEVELOPMENT GROUND TEST PLAN FOR THE ASTEC SOLAR ENERGY COLLECTOR.

DTIC Science & Technology

optical, and structural integrity of the full scale ASTEC solar collector before further development proceeds. This document specifies these initial...engineering ground tests recommended for testing petals and other critical components of the ASTEC collector. It defines the requirements and

Light Aircraft Engines, the Potential and Problems for Use of Automotive Fuels. Phase 1. Literature Search

DTIC Science & Technology

1980-12-01

14, 1944), 466-500. 22. Smith, Maxwell. AVIATION FUELS. Foulis & Co., Ltd., University Printing House, Cambridge, 1970. 23. Dugan, W. P., and Toulmin ...Plane Engines And Their Fuel Problems," SAE JOURNAL, Vol. 50, No. 5 (May 1942), 188-195. Dugan, W. P., and Toulmin , H. A. THE CARBURETOR ICING TENDENCIES

A Note on Local Stability Conditions for Two Types of Monetary Models with Recursive Utility

NASA Astrophysics Data System (ADS)

Miyazaki, Kenji; Utsunomiya, Hitoshi

2009-09-01

This note explores local stability conditions for money-in-utility-function (MIUF) and transaction-costs (TC) models with recursive utility. Although Chen et al. [Chen, B.-L., M. Hsu, and C.-H. Lin, 2008, Inflation and growth: impatience and a qualitative equivalent, Journal of Money, Credit, and Banking, Vol. 40, No. 6, 1310-1323] investigated the relationship between inflation and growth in MIUF and TC models with recursive utility, they conducted only a comparative static analysis in a steady state. By establishing sufficient conditions for local stability, this note proves that impatience should be increasing in consumption and real balances. Increasing impatience, although less plausible from an empirical point of view, receives more support from a theoretical viewpoint.

PPBS for State and Local Officials. Library Notes, Vol. 6, No. 4.

ERIC Educational Resources Information Center

Grossbard, Stephen I.

The planning, programming, budgeting system (PPBS) is an instrument to help policy-makers assign priorities and allocate resources. It does not seek to computerize what is essentially a political process, nor is it intended that the statisticians and cost accountants take over functions that properly belong to the political decision-maker. PPBS is…

Faculty Workload Studies: Perspectives, Needs, and Future Directions. ASHE-ERIC Higher Education Report, Vol. 26, No. 1.

ERIC Educational Resources Information Center

Meyer, Katrina A.

This report reviews the literature and discusses issues concerning college faculty workload and productivity. Section 1 reviews the situation in the United States, noting increased interest in faculty workload issues as a result of population pressures, faltering economies, and the rising costs of higher education, especially of personnel. Section…

Cultural Resource Investigation of Lands Affected by a Flood Control Project at Chaska, Minnesota, along the Minnesota River

DTIC Science & Technology

1981-01-01

ethnohistory 1959-76 Minnesota, North Dakota, annual archaeological research 1967 Paleolithic site survey, Pakistan Professional Associations: American...34Interesting Archaeological Reading." Minnesota Archaeologist, Vol. 32, No’s. 1 and 2, pp. 113-114. "Notes on a Paleolithic Site Survey in Pakistan." Asian

Introduction to Flight Test Engineering (Introduction aux techniques des essais en vol)

DTIC Science & Technology

2005-07-01

or aircraft parameters • Calculations in the frequency domain ( Fast Fourier Transform) • Data analysis with dedicated software for: • Signal...density Fast Fourier Transform Transfer function analysis Frequency response analysis Etc. PRESENTATION Color/black & white Display screen...envelope by operating the airplane at increasing ranges - representing increasing risk - of engine operation, airspeeds both fast and slow, altitude

Nonlinear Analysis of Mechanical Systems Under Combined Harmonic and Stochastic Excitation

DTIC Science & Technology

1993-05-27

Namachchivaya and Naresh Malhotra Department of Aeronautical and Astronautical Engineering University of Illinois, Urbana-Champaign Urbana, Illinois...Aeronauticai and Astronautical Engineering, University of Illinois, 1991. 2. N. Sri Namachchivaya and N. Malhotra , Parametrically Excited Hopf Bifurcation...Namachchivaya and N. Malhotra , Parametrically Excited Hopf Bifurcation with Non-semisimple 1:1 Resonance, Nonlinear Vibrations, ASME-AMD, Vol. 114, 1992. 3

Multiple Learning Strategies Project. Small Engine Repair Service. Low Reader-Educable Mentally Impaired. [Vol. 2.

ERIC Educational Resources Information Center

White, Debi; And Others

This instructional package, one of two designed for low reader-educable mentally impaired students, focuses on the vocational area of small engine repair service. (Low readers are identified as those at a reading level of grades 3-6.) Contained in this document are fifty learning modules organized into twelve units: sharpening and grinding mowers;…

Rapid Measurement of Emissions From Military Aircraft Turbine Engines by Downstream Extractive Sampling of Aircraft on the Ground: Results for C-130 and F-15 Aircraft (POSTPRINT)

DTIC Science & Technology

2009-02-01

four Allison T56 -A-15 turboprop engines which can generate in excess of 4500 horsepower at maximum power. This engine type uses a single entry, 14-stage...JP-8 JP-8 þ 100 Aircraft C-130H F-15 Engine Allison T56 P & W F100-PE-100 Composition (Vol %) Aromatics 16.3 12.4 Alkenes 1.6 2.5 Alkanes 82.1 85.1...respectively. Results are shown for the lowest and highest throttle settings for each of the engine types. The intra-engine variability of two T56

Horizontal Two Phase Flow Regime Identification: Comparison of Pressure Signature, Electrical Capacitance Tomography (ECT) and High Speed Visualization (Postprint)

DTIC Science & Technology

2012-11-01

W., and Mudawar , I., "Measurement and Correlation of Critical Heat Flux in Two-Phase Micro-Channel Heat Sinks," International Journal of Heat and...Mass Transfer, Vol. 47, No. 10-11, 2004, pp. 2045-2059. 3 Zhang, H., Mudawar , I., and Hasan, M. M., "Photographic Study of High-Flux Subcooled Flow...component Fow in Pipes," Chemical Engineering Progress, Vol. 45, 1949, pp. 39-48. 34 Qu, W., and Mudawar , I., "Measurement and Prediction of Pressure

Multi-Scale Behavioral Modeling and Analysis Promoting a Fundamental Understanding of Agent-Based System Design and Operation

DTIC Science & Technology

2007-03-01

Chains," Mathematics of Control, Signals, and Systems, vol. 3(1), pp. 1-29, 1990. [4] A . Arnold, J . A . Carrillo, and I. Gamba, "Low and High Field...Aronson, C. L. A ., and J . L. Vázquez, "Interfaces with a corner point in one- dimensional porous medium flow," Comm. Pure Appl. Math, vol. 38(4), pp. 375...K. Levin, "Damage analysis of fiber composites," Computer Methods in Applied Mechanics and Engineering. [10] K. S. Barber, A . Goel, T. J . Graser, T

Overview of Lockheed Martin cryocoolers

NASA Astrophysics Data System (ADS)

Nast, T.; Olson, J.; Champagne, P.; Evtimov, B.; Frank, D.; Roth, E.; Renna, T.

2006-02-01

Lockheed Martin's Advanced Technology Center (LM-ATC) in Palo Alto, California, has been active in space cryogenic developments for over 30 years. In prior years, work focused on stored cryogen systems for temperatures up to 125 K. As the mechanical cryocoolers matured and demonstrated reliable operation these stored cryogen systems gradually became replaced. LM-ATC is currently developing solid hydrogen systems for temperatures below 7 K [Naes L, Wu S, Cannon J. WISE solid hydrogen cryostat design overview. In: Proceedings of SPIE, cryogenic optical systems and instruments XI, vol. 5904, August, 2005], but these coolers will soon be replaced by mechanical cryocoolers. This paper will present a summary of cryocooler developments at LM-ATC and will describe the recent performance of multiple stage systems. A four-stage pulse tube cryocooler developed under contract to the Jet Propulsion Laboratory (JPL) has been recently developed and operated at 3.8 K [Olson JR, Moore M, Champagne P, Roth E, Evtimov B, Jensen J, et al. Development of a space-type-4-stage pulse tube cryocooler for very low temperatures, Adv Cryogen Engr, vol. 50, Amer Inst of Physics, New York, in press]. Coolers with one, two and three stages have also been widely developed [Nast TC et al. Miniature pulse tube cryocooler for space applications. Cryocoolers, vol. 11. New York: Plenum Press; 2000. p. 145-54; Olson J et al. Development of a 10 K pulse tube cryocooler for space applications. In: Ross R, editor. Cryocoolers, vol. 12. New York: Kluwer Academic/Plenum Publishers; 2003. p. 241-6; Nast TC et al. Lockheed Martin two-stage pulse tube cryocooler for GIFTS. Cryocoolers, vol. 13. New York: Kluwer Academic/Plenum Publishers; 2005; Frank D et al. Lockheed Martin RAMOS engineering model cryocooler. Cryocoolers, vol. 13. New York: Kluwer Academic/Plenum Publishers; 2005]. A staging approach is required to achieve very low temperatures, and also provides cooling at warmer temperatures, which is invariably beneficial in reducing heat loads to the lower temperature stages, or for cooling other system components. For example, our two-stage cooler [Nast TC et al. Lockheed Martin two-stage pulse tube cryocooler for GIFTS. Cryocoolers, vol. 13. New York: Kluwer Academic/Plenum Publishers; 2005; Frank D et al. Lockheed Martin RAMOS engineering model cryocooler. Cryocoolers, vol. 13. New York: Kluwer Academic/Plenum Publishers; 2005] is used to cool a low-temperature focal plane as well as a higher temperature optical sensor, using a single compressor and electronics at a substantial benefit in weight, reliability and cost.

Worldwide Engagement for Digitizing Biocollections (WeDigBio): The Biocollections Community's Citizen-Science Space on the Calendar

PubMed Central

Kimberly, Paul; Guralnick, Robert; Flemons, Paul; Love, Kevin; Ellis, Shari; Allen, Julie M; Best, Jason H; Carter, Richard; Chagnoux, Simon; Costello, Robert; Denslow, Michael W; Dunckel, Betty A; Ferriter, Meghan M; Gilbert, Edward E; Goforth, Christine; Groom, Quentin; Krimmel, Erica R; LaFrance, Raphael; Martinec, Joann Lacey; Miller, Andrew N; Minnaert-Grote, Jamie; Nash, Thomas; Oboyski, Peter; Paul, Deborah L; Pearson, Katelin D; Pentcheff, N Dean; Roberts, Mari A; Seltzer, Carrie E; Soltis, Pamela S; Stephens, Rhiannon; Sweeney, Patrick W; von Konrat, Matt; Wall, Adam; Wetzer, Regina; Zimmerman, Charles; Mast, Austin R

2018-01-01

Abstract The digitization of biocollections is a critical task with direct implications for the global community who use the data for research and education. Recent innovations to involve citizen scientists in digitization increase awareness of the value of biodiversity specimens; advance science, technology, engineering, and math literacy; and build sustainability for digitization. In support of these activities, we launched the first global citizen-science event focused on the digitization of biodiversity specimens: Worldwide Engagement for Digitizing Biocollections (WeDigBio). During the inaugural 2015 event, 21 sites hosted events where citizen scientists transcribed specimen labels via online platforms (DigiVol, Les Herbonautes, Notes from Nature, the Smithsonian Institution's Transcription Center, and Symbiota). Many citizen scientists also contributed off-site. In total, thousands of citizen scientists around the world completed over 50,000 transcription tasks. Here, we present the process of organizing an international citizen-science event, an analysis of the event's effectiveness, and future directions—content now foundational to the growing WeDigBio event. PMID:29599548

Defense Acquisition Research Journal. Volume 24, Number 1, Issue 80, January 2017

DTIC Science & Technology

2017-01-01

call 703-960-6802 or 800-755-8805, or e-mail dauaa2@aol.com. ISSUE 80 JANUARY 2017 VOL. 24 NO. 1 1 We’re on the Web at: http://www.dau.mil...technical proposals, use white papers as an initial screen- ing process. The initial screening based solely on technical merit will help industry and...mda.mil) Dr. Thomas A . Mazzuchi is cha ir of the Department of Engineering Management and Systems Engineering in the School of Engineering and Applied

The CAP Approach to Modifying Vocational Programs for Handicapped Students. Vol. 5: Trades and Industry with an Example in Welding.

ERIC Educational Resources Information Center

Fessenden, Patricia K.; Mendini, Daniel

This combination teaching guide and student workbook, fifth in a five-volume series (see note), presents an approach to teaching basic welding and welding terms for handicapped students. The teaching guide discusses a functional approach to teaching that can accomodate or alleviate the effects of disabilities. Discussion centers on categories to…

78 FR 18393 - Self-Regulatory Organizations; the NASDAQ Stock Market LLC; Order Granting Approval of a Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-26

... Financial and Quantitative Analysis, Vol. 44, 1427-1457 (2009) (``Weaver Study''); H. Bessembinder, J. Hao.... 3, supra note 6. \\20\\ See proposed Rule 5950(a)(1)(B). Factors that could be considered by the... quoted, and quality of the market in the MQP Security; and any other relevant factors.\\26\\ After an MQP...

Numerical and Experimental Investigation of Multiple Shock Wave/Turbulent Boundary Layer Interactions in a Rectangular Duct

DTIC Science & Technology

1988-01-06

the bottom % kall followin,, the interaction. At 6Wuh = 0.35 the shock train would not stay attached to a single wall long enough for the surface...Interaction of a Shock Wave with a Laminar Boundary Layer," Lecture Notes in Physics, Vol. 8, Springer-Verlag, 1971 , pp. 151-163. 51 MacCormack, R. W

Theory, Computation and Experiment on Criticality and Stability of Vortices Separating from Edges

DTIC Science & Technology

2016-08-15

aerospace engineering research. These include dynamic stall in wind turbines and helicopter rotors, and flapping-wing vehicle (micro-air vehicle) design...and Robinson, M., “Blade Three-Dimensional Dynamic Stall Response to Wind Turbine Operating Condition,” Journal of Solar Energy Engineering , Vol...Snapshots of TEV shedding in vortex ring representation. . . . . . . . . . . . . . . . 57 7.3 Schematic description of separated tip flow model

On the direct detection of gravitational waves

NASA Astrophysics Data System (ADS)

Pustovoit, V. I.

2016-10-01

Different types of gravitational wave (GW) detectors are considered. It is noted that interferometric techniques offer the greatest prospects for GW registration due to their high sensitivity and extremely wide frequency band. Using laser interferometers, proposed as far back as 1962 in the work by M E Gertsenshtein and V I Pustovoit published in Russian (Zh. Eksp. Teor. Fiz., vol. 43, p. 605, 1962) and in English translation (Sov. Phys. JETP, vol. 16, p. 433, 1963), it proved possible for the first time to directly detect GW emission from a merger of two black holes. It is noted that the assertion that Gertsen-shtein-Pustovoit's work was unknown to some of those experts involved in direct GW detection is inconsistent with reality. The problems of high-power laser radiation affecting the electrostatic polarization of free-mass mirrors are discussed. It is shown that mirror polarization can lead to additional links with electrically conducting elements of the design resulting in the interferometer's reduced sensitivity. Some new prospects for developing high reflection structures are discussed and heat extraction problems are considered. This article is the revised and extended version of the report “On the first direct detection of gravitational waves” delivered by V I Pustovoit at the Scientific Session of the Physical Sciences Division of the Russian Academy of Sciences (March 2, 2016). All other reports presented at the session were published in the preceding issue of Physics-Uspekhi (September 2016) (see Refs [108, 111-113]). (Editorial note)

Prefabricated vertical drains, vol. I : engineering guidelines.

DOT National Transportation Integrated Search

1986-09-01

This volume presents procedures and guidelines applicable to the design and instal tion of prefabricated vertical drains to accelerate consolidation of soils. The contents represent the Consultant's interpretation of the state-of-the-art as of August...

PACD 2006

DTIC Science & Technology

2007-05-01

American Institute of Aeronautics and Astronautics 1 PACD 2006 Yves de Lassat de Pressigny * Centre d’Essais en Vol, FR Richard Benney† US...Army Natick Soldier Research, Development and Engineering Center Mick Vallance ‡ Joint Air Transportation Evaluation Unit, UK Jan-Henrik Wintgens

Effects of gasoline aromatic content on emissions of volatile organic compounds and aldehydes from a four-stroke motorcycle.

PubMed

Yao, Yung-Chen; Tsai, Jiun-Horng

2013-01-01

A new four-stroke carburettor motorcycle engine without any engine adjustments was used to study the impact of fuel aromatic content on the exhaust emissions of organic air pollutants (volatile organic compounds and carbonyls). Three levels of aromatic content, i.e. 15, 25, and 50% (vol.) aromatics mixed with gasoline were tested. The emissions of aromatic fuel were compared with those of commercial unleaded gasoline. The results indicated that the A 15 (15 vol% aromatics in gasoline) fuel exhibited the greatest total organic emission improvement among these three aromatic fuels as compared with commercial gasoline, reaching 59%. The highest emission factors of alkanes, alkenes, and carbonyl groups appeared in the reference fuel (RF) among all of the test fuels. A 15 showed the highest emission reduction in alkanes (73%), aromatics (36%), and carbonyls (28%), as compared to those of the RF. The highest emission reduction ofalkenes was observed when using A25 as fuel. A reduction in fuel aromatic content from 50 to 25 and 15 vol% in gasoline decreased benzene and toluene emissions, but increased the aldehyde emissions. In general, the results showed that the highest emission reductions for the most of measured organic pollutants appeared when using A 15 as the fuel.

FE Furukawa poses for a photo during VolSci Session

NASA Image and Video Library

2011-06-25

ISS028-E-009727 (25 June 2011) --- Japan Aerospace Exploration Agency astronaut Satoshi Furukawa, Expedition 28 flight engineer, is pictured near the Cell Biology Experiment Facility (CBEF) in the Kibo laboratory of the International Space Station.

Landslide hazard rating matrix and database : vol. 1 of 2.

DOT National Transportation Integrated Search

2007-12-01

The Office of Geotechnical Engineering (OGE) of the Ohio Department of Transportation (ODOT) : recognizes the need to develop a strategy to provide timely preventive maintenance to avoid on-set of : large or catastrophic slope failures. Furthermore, ...

Engineering Extreme Hydrophobic and Super Slippery Water Shedding Surfaces

NASA Astrophysics Data System (ADS)

McHale, Glen

2017-04-01

The intrinsic water repellency of a material is fundamentally determined by its surface chemistry, but alone this does not determine the ability of a surface to shed water. Physical factors such as the surface texture/topography, rigidity/flexibility, granularity/porosity combined with the intrinsic wetting properties of the liquid with the surface and whether it is infused by a lubricating liquid are equally important. In this talk I will outline fundamental, but simple, ideas on the topographic enhancement of surface chemistry to create superhydrophobicity, the adhesion of particles to liquid-air interfaces to create liquid marbles, elastocapillarity to create droplet wrapping, and lubricant impregnated surfaces to create completely mobile droplets [1-3]. I will discuss how these ideas have their origins in natural systems and surfaces, such as Lotus leaves, galling aphids and the Nepenthes pitcher plant. I will show how we have applied these concepts to study the wetting of granular systems, such as sand, to understand extreme soil water repellency. I will argue that relaxing the assumption that a solid substrate is fixed in shape and arrangement, can lead to the formation of liquid marbles, whereby a droplet self-coats in a hydrophobic powder/grains. I will show that the concepts of wetting and porosity blur as liquids penetrate into a porous or granular substrate. I will also discuss how lubricant impregnated super slippery surfaces can be used to study a pure constant contact angle mode of droplet evaporation [4]. Finally, I will show dewetting of a surface is not simply a video reversal of wetting [5], and I will give an example of the use of perfect hydrophobicity using the Leidenfrost effect to create a new type of low friction mechanical and hear engine [6]. References: [1] Shirtcliffe, N. J., et al., An introduction to superhydrophobicity. Advances in Colloid and Interface Science, vol. 161, pp.124-138 (2010). [2] McHale, G. & Newton, M. I. Liquid marbles: topical context within soft matter and recent progress. Soft Matter, vol. 11, pp. 2530-2546 (2015). [3] Geraldi, N. R., et al., Capillary origami and superhydrophobic membrane surfaces. Applied Physics Letters, vol. 102, art. 214104 (2013). [4] Guan, J. H. et al., Evaporation of sessile droplets on Slippery Liquid-Infused Porous Surfaces (SLIPS). Langmuir, vol. 31, pp. 11781-11789 (2015). [5] Edwards, A. M. J., et al., Not spreading in reverse: The dewetting of a liquid film into a single drop. Science Advances, vol. 2, art. e1600183-e1600183 (2016). [6] Wells, G. G., et al., A sublimation heat engine. Nature Communications, vol. 6, art. 6390 (2015). Acknowledgement: This work has been financially supported by the UK EPSRC and Reece Innovation Ltd, and developed in collaboration with co-workers at Northumbria, Nottingham Trent, Edinburgh, Swansea and Durham Universities.

Sealing Mustard Jars with Plastic Linerless Closures

DTIC Science & Technology

1985-10-01

Recommendations 15 Literature cited 16 Appendices: A . Levels of Packaging 19 B. Value Engineering Correspondence 2 3 V ILLUSTRATIVE DATA Page...Analytical Progress Total Dietary Fiber Another Look, 1984, Vol 2,■No. 1, Minneapolis, MN 16 APPENDIXES A : Levels of Packaging B: Value...Engineering Correspondence 17 APPENDIX A : Levels of Packaging 19 APPENDIX A : Levels of Packaging Excerpt from: AR 700-15/NAVSUPINST 4030.28B/AFR 71~6

DI Diesel Performance and Emissions Models

DTIC Science & Technology

2003-06-11

Skeletal mechanism for NOx chemistry in diesel engines ,” SAE Paper 981450, 1998 SAE Transactions, Vol. 107, Sect. 4, J. Fuels and... mechanism for NOx chemistry proposed by Mellor et al. (1998a) is incorporated in an engine simulation code. The two-zone model, also proposed by Mellor et...34Dynamic Application of a Skeletal Mechanism for DI Diesel NOx Emissions," SAE Paper 2001-01-1984, SAE Trans., J. Fuels & Lubricants,

Optimizing Engineering Tools Using Modern Ground Architectures

DTIC Science & Technology

2017-12-01

Considerations,” International Journal of Computer Science & Engineering Survey , vol. 5, no. 4, 2014. [10] R. Bell. (n.d). A beginner’s guide to big O notation...scientific community. Traditional computing architectures were not capable of processing the data efficiently, or in some cases, could not process the...thesis investigates how these modern computing architectures could be leveraged by industry and academia to improve the performance and capabilities of

Combustion Heat Release Rate Comparison of Algae Hydroprocessed Renewable Diesel to F-76 in a Two-Stroke Diesel Engine

DTIC Science & Technology

2013-06-01

SAE Int. J. Engines, vol. 1, no. 1, 2008. [12] P. A. Caton, S. A.Williams, R. A. Kamin, D. Luning -Prak, L. J. Hamilton and J. S. Cowart...Detroit, MI, Feb. 27- Mar. 2, 1984. [14] J. Cowart, M. Carr, P. Caton, L. Stoulig, D. Luning -Prak, A. Moore and L. Hamilton, “High Cetane Fuel Combustion

COED Transactions, Vol. IX, No. 10 & No. 11, October/November 1977. Teaching Professional Use of the Computer While Teaching the Major. Computer Applications in Design Instruction.

ERIC Educational Resources Information Center

Marcovitz, Alan B., Ed.

Presented are two papers on computer applications in engineering education coursework. The first paper suggests that since most engineering graduates use only "canned programs" and rarely write their own programs, educational emphasis should include model building and the use of existing software as well as program writing. The second paper deals…

Conditional Belief Types

DTIC Science & Technology

2016-04-19

event is the same as conditioning on the event being certain, which formalizes the standard informal interpretation of conditional probability. The game ...theoretic application of our model, discussed within an example, sheds light on a number of issues in the analysis of extensive form games . Type...belief types Block 13: Supplementary Note © 2014 . Published in Games and Economic Behavior, Vol. Ed. 0 87, (0) (2014), (, (0). DoD Components

Cloud Offload in Hostile Environments

DTIC Science & Technology

2011-12-01

of recognized objects in an input image. FACE: Windows XP C++ application based on the OpenCV library [45]. It returns the coordinates and identities...SOLDIER. Energy-Efficient Technolo- gies for the Dismounted Soldier”. National Research Council, 1997. [16] COMMITTEE ON SOLDIER POWER/ENERGY SYSTEMS...vol. 4658 of Lecture Notes in Computer Science. Springer Berlin / Heidelberg, 2007. [45] OPENCV . OpenCV Wiki. http://opencv.willowgarage.com/wiki/. [46

The Politics of Speaking: An Approach to Evaluating Bilingual-Bicultural Schools. Bilingual Education Paper Series, Vol. 1, No. 6.

ERIC Educational Resources Information Center

Erickson, Frederick

A method of evaluating bilingual-bicultural education programs that has a sociolinguistic basis uses samples of the language spoken by a number of bilingual program students as they go through their school day. A random sample of the child's speech would be continuously recorded for an hour, with a bilingual observer taking running notes on where…

Books Noted

NASA Astrophysics Data System (ADS)

Walsh, Edward J.

1999-10-01

The Colloidal Domain: Where Physics, Chemistry, Biology, and Technology Meet, 2nd edition

D. Fennell Evans and Hakan Wennerstroem. Advances in Interfacial Engineering Series. Wiley-VCH: New York, 1999. xl + 632 pp. ISBN 0-471-24247-0. 89.95.

Commercial Nuclear Power: Assuring Safety for the Future

Charles B. Ramsey and Mohammed Modarres. Wiley-Interscience: New York, 1998. xxviii + 508 pp. ISBN 0-471-29186-2. 79.95.

Advances in Medicinal Chemistry, Vol. 4

Bruce E. Maryanoff and Allen B. Reitz, Eds. JAI Press: Stamford, CT, 1999. ISBN 1-7623-0064-7. 109.50.

Advances in Strained and Interesting Organic Molecules, Vol. 7

Brian Halton, Ed. JAI Press: Stamford, CT, 1999. xii + 259 pp. ISBN 0-7623-0530-4. 109.50.

Advances in Electron Transfer Chemistry, Vol. 6

Patrick S. Mariano, Ed. JAI Press: Stamford, CT, 1999. x + 171 pp. ISBN 0-7623-0213-5. 109.50.

Automating Science and Engineering Laboratories with Visual Basic

Mark F. Russo and Martin M. Echols. Wiley-Interscience Series on Laboratory Automation. Wiley-Interscience: New York, 1999. xx + 355 pp. ISBN 0-471-25493-2. 49.95.

Plantwide Process Control

Kelvin T. Erickson and John L. Hedrick. Wiley Series in Chemical Engineering. Wiley-Interscience: New York, 1999. xii + 547 pp. ISBN 0-471-17835-7. 89.95.

Heme Peroxidases

H. Brian Dunford. Wiley-VCH: New York, 1999. xiii + 507 pp. ISBN 0-471-24244-6. 195.00.

Industrial Ecology: Environmental Chemistry and Hazardous Wastes

Stanley E. Manahan. Lewis: Boca Raton, FL, 1999. 318 pp. ISBN 1-56670-381-6. 69.95.

Reviews in Computational Chemistry, Vol. 13

Kenny B. Lipkowitz and Donald B. Boyd. Wiley-VCH: New York, 1999. xxxiii + 426 pp. ISBN 0-471-33135-x. 135.00.

Surfaces, Interfaces, and Colloids: Principles and Applications, 2nd edition

Drew Myers. Wiley-VCH: New York, 1999. xx + 501 pp. ISBN 0-471-33060-4. 94.95.

Onium Ions

George A. Olah, Kenneth K. Laali, Qi Wang, and G. K. Surya Prakash. Wiley-Interscience: New York, 1998. xv + 509 pp. ISBN 0-471-14877-6. 110.00.

Environmental Soil and Water Chemistry: Principles and Applications V. P. Evangelou. Wiley-Interscience: New York, 1998. xix + 564 pp. ISBN 0-471-16515-8. 79.95.

1001 Chemicals in Everyday Products, 2nd edition

Grace Ross Lewis. Wiley-Interscience: New York, 1999. x + 388 pp. ISBN 0-471-29212-5. 39.95.

Organic Coatings: Science and Technology, 2nd edition

Zeno W. Wicks Jr., Frank N. Jones, and S. Peter Pappas. Wiley-Interscience: New York, 1999. xxi + 630 pp. ISBN 0-471-24507-0. 125.00.

Progress in Inorganic Chemistry, Vol. 48

Kenneth D. Karlin, Ed. Wiley-Interscience: New York, 1999. vi + 603 pp. ISBN 0-471-32623-2. 145.00.

Occupational Biomechanics, 3rd edition

Don B. Chaffin, Gunnar B. Andersson, and Bernard J. Martin. Wiley-Interscience: New York, 1999. xvii + 579 pp. ISBN 0-471-24697-2. 69.95.

Advances in Photochemistry, Vol. 25

Douglas C. Neckers, David H. Volman, and Gunther Von Bünau. Wiley-Interscience: New York, 1999. xi + 238 pp. ISBN 0-471-32708-5. 110.00.

Distillation

Johann G. Stichlmair and James R. Fair. Wiley-VCH: New York, 1998. xiii + 524 pp. ISBN 0-471-25241-7. 94.95.

Ammonia - Principles and Industrial Practice

Maz Appl. Wiley-VCH: New York, 1999. ix + 301 pp. ISBN 3-527-29593-3. 160.00.

Precursor-Derived Ceramics: Synthesis, Structure, and High-Temperature Mechanical Properties

Fritz Aldinger, Fumihiro Wakai, and Joachim Bill, Eds. Wiley-VCH: New York, 1999. xv + 298 pp. ISBN 3-527-29814-2. 180.00.

Advances in Sonochemisty, Vol. 5

Timothy J. Mason. JAI Press: Stamford, CT, 1999. xi + 311 pp. ISBN 0-7623-0331-x. 109.50.

Fluid Metals: The Liquid-Vapor Transition of Metals

Friedrich Hensel and William W. Warren Jr. Princeton University Press: Princeton, NJ. 1999. xvii + 243 pp. ISBN 0-691-05830-x. 69.50.

Direct Phasing in Crystallography: Fundamentals and Applications

Carmelo Giacovazzo. Oxford University Press: New York, 1999. xxiii + 767 pp. ISBN 0-19-850072-6. 140.00.

Practical Environmental Analysis

M. Radojevic and V. N. Bashkin. Royal Society of Chemistry: Cambridge, UK. 1999. xx + 466 pp. ISBN 0-85404-594-5. £32.00.

Advances in Dendritic Macromolecules, Vol. 4 George R. Newkome, Ed. JAI Press: Stamford, CT, 1999. x + 207 pp. ISBN 0-7623-0347-6. 109.50.

Advances in Quantitative Structure-Property Relationships, Vol. 2

Marvin Charton. JAI Press: Stamford, CT, 1999. ix + 257 pp. ISBN 0-7623-0067-1. 109.50.

Pesticide Residues in Foods: Methods, Techniques, and Regulations

W. George Fong, H. Anson Moye, James N. Seiber, and John P. Toth. Chemical Analysis, Vol. 151.Wiley-Interscience: New York, 1999. xiv + 358 pp. ISBN 0-471-57400-7. $84.95.

Update of aircraft profile data for the Integrated Noise Model computer program, vol 1: final report

DOT National Transportation Integrated Search

1992-03-01

This report provides aircraft takeoff and landing profiles, aircraft aerodynamic performance coefficients and engine performance coefficients for the aircraft data base (Database 9) in the Integrated Noise Model (INM) computer program. Flight profile...

Diesel reformulation using bio-derived propanol to control toxic emissions from a light-duty agricultural diesel engine.

PubMed

Thillainayagam, Muthukkumar; Venkatesan, Krishnamoorthy; Dipak, Rana; Subramani, Saravanan; Sethuramasamyraja, Balaji; Babu, Rajesh Kumar

2017-07-01

In the Indian agricultural sector, millions of diesel-driven pump-sets were used for irrigation purposes. These engines produce carcinogenic diesel particulates, toxic nitrogen oxides (NOx), and carbon monoxide (CO) emissions which threaten the livelihood of large population of farmers in India. The present study investigates the use of n-propanol, a less-explored high carbon bio-alcohol that can be produced by sustainable pathways from industrial and crop wastes that has an attractive opportunity for powering stationary diesel engines meant for irrigation and rural electrification. This study evaluates the use of n-propanol addition in fossil diesel by up to 30% by vol. and concurrently reports the effects of exhaust gas recirculation (EGR) on emissions of an agricultural DI diesel engine. Three blends PR10, PR20, and PR30 were prepared by mixing 10, 20, and 30% by vol. of n-propanol with fossil diesel. Results when compared to baseline diesel case indicated that smoke density reduced with increasing n-propanol fraction in the blends. PR10, PR20, and PR30 reduced smoke density by 13.33, 33.33, and 60%, respectively. NOx emissions increased with increasing n-propanol fraction in the blends. Later, three EGR rates (10, 20, and 30%) were employed. At any particular EGR rate, smoke density remained lower with increasing n-propanol content in the blends under increasing EGR rates. NOx reduced gradually with EGR. At 30% EGR, the blends PR10, PR20, and PR30 reduced NOx emissions by 43.04, 37.98, and 34.86%, respectively when compared to baseline diesel. CO emissions remained low but hydrocarbon (HC) emissions were high for n-propanol/diesel blends under EGR. Study confirmed that n-propanol could be used by up to 30% by vol. with diesel and the blends delivered lower soot density, NOx, and CO emissions under EGR.

Engine Handling.

DTIC Science & Technology

1983-02-01

la sells do mosures. Lair eat aspirE & 1’extdriour do la colliule A travers un filtre & poussibres, passe doe 1e conver- gent qui d~livre un dcoulemont...system, so that the spatially nonuniform , steady flow is seen as unsteady but spatially uniform.’ A single-streatube model is used for purely...in Uniform and Nonuniform Flow." Journal of Engineering for Power, Vol. 102, October 1980, pp. 762-769. 12Fabri, J. "Rotating Stall in Axial Flow

Projected Commercial Maritime Activity in the Western Arctic

DTIC Science & Technology

1977-10-01

for Polar Icebreaking 1967. Coast GuarC, U.S., Office of Engineering, Life Cycle Costs of Diesel Electric Propulsion Plants for a 20,000 SHP Polar...Dynamics, Electric Boat Division, Program Plan for Arctic Offshore Drilling System. 1970. Geological Survey, U.S., Mineral and Water Resources of Alaska...Port and Ocean EngineerLng under Arctic Conditions, Vol. I, Trondheim, Norway: Terhnical Institute of ’Norway, Page 37 Weeks, W. F. and Frankenstein

USAF Summer Research Program - 1993 Graduate Student Research Program Final Reports, Volume 6, AEDC, FJSRL and WHMC

DTIC Science & Technology

1993-12-01

Mechanical Engineering Associate, PhD Laboratory: PL/VT Division Engineering University of Texas, San Anton Vol-Page No: 3-26 San Antonio, TX 7824-9065...parameters. The modules can be primitive or compound. Primitive modules represent the elementary computation units and define their interfaces. The... linear under varying conditions for the range of processor numbers. Discussion Performance: Our evaluation of the performance measurement results is the

What Do We Really Need? Visions of an Ideal Human-Machine Interface for NOTES Mechatronic Support Systems From the View of Surgeons, Gastroenterologists, and Medical Engineers.

PubMed

Kranzfelder, Michael; Schneider, Armin; Fiolka, Adam; Koller, Sebastian; Wilhelm, Dirk; Reiser, Silvano; Meining, Alexander; Feussner, Hubertus

2015-08-01

To investigate why natural orifice translumenal endoscopic surgery (NOTES) has not yet become widely accepted and to prove whether the main reason is still the lack of appropriate platforms due to the deficiency of applicable interfaces. To assess expectations of a suitable interface design, we performed a survey on human-machine interfaces for NOTES mechatronic support systems among surgeons, gastroenterologists, and medical engineers. Of 120 distributed questionnaires, each consisting of 14 distinct questions, 100 (83%) were eligible for analysis. A mechatronic platform for NOTES was considered "important" by 71% of surgeons, 83% of gastroenterologist,s and 56% of medical engineers. "Intuitivity" and "simple to use" were the most favored aspects (33% to 51%). Haptic feedback was considered "important" by 70% of participants. In all, 53% of surgeons, 50% of gastroenterologists, and 33% of medical engineers already had experience with NOTES platforms or other surgical robots; however, current interfaces only met expectations in just more than 50%. Whereas surgeons did not favor a certain working posture, gastroenterologists and medical engineers preferred a sitting position. Three-dimensional visualization was generally considered "nice to have" (67% to 72%); however, for 26% of surgeons, 17% of gastroenterologists, and 7% of medical engineers it did not matter (P = 0.018). Requests and expectations of human-machine interfaces for NOTES seem to be generally similar for surgeons, gastroenterologist, and medical engineers. Consensus exists on the importance of developing interfaces that should be both intuitive and simple to use, are similar to preexisting familiar instruments, and exceed current available systems. © The Author(s) 2014.

Federal Radionavigation Plan. Vol. IV. Radionavigation Research, Engineering and Development.

DOT National Transportation Integrated Search

1982-03-01

The second edition of the Federal Radionavigation Plan (FRP) has been jointly developed by the U.S. Departments of Defense and Transportation to ensure efficient use of resources and full protection of national interests. The plan sets forth the Fede...

Update of aircraft profile data for the Integrated Noise Model computer program, vol. 3 : appendix B aircraft performance coefficients

DOT National Transportation Integrated Search

1992-03-01

This report provides aircraft takeoff and landing profiles, : aircraft aerodynamic performance coefficients and engine : performance coefficients for the aircraft data base : (Database 9) in the Integrated Noise Model (INM) computer : program. Flight...

Egypt: Background and U.S. Relations

DTIC Science & Technology

2007-06-19

syndicates (associations), including those representing engineers, doctors, lawyers and academics.21 CRS-15 21 (...continued) winter 2003), vol. 24...Schiff, a columnist for the Israeli newspaper Ha’aretz recently wrote that “The rules of engagement for the Egyptian forces guarding the border are also

Explosive Loading of Metals and Related Topics

DTIC Science & Technology

1986-05-01

Griffiths, "A U. K. Note on the History of Shaped Charges,• Royal Armament Research and Development Establishment Report, August 1983, presented...1925. 20. R. W. Wood, •optical and Physical Effects of High Explosives,• Proceedings of .the Royal Society (London), Vol. 157A, 1936, pp. 249-261...correctly analyzes geometric configurations in this report such as the Jelly Roll, the Dagwood and similar explosive-metal multilayer arrangements. In

OSA Trends in Optics and Photonics Series, Volume 14 Spatial Light Modulators

DTIC Science & Technology

1998-05-26

Extreme Ultraviolet Lithography Glenn D. Kubiak andDon R. Kania, eds. Vol. 5 Optical Amplifiers and Their Applications (1996) Edited by...micromirror device ( DMD ), and photorefractive crystal. Note that other devices not discussed in this article have been developed, such as the charge...earlier. DMDs are fabricated by micromachining a silicon wafer.7 Tiny (16 um X 16 um) suspended mirrors are micromachined on cantilevers. The

Regulation of Health Policy: Patient Safety and the States

DTIC Science & Technology

2005-05-01

the consumer perspective about patient safety. Advances in Patient Safety: Vol 1 420 Note See e.g., Public Citizen, Inc. v. U.S. Dept. of Health ...405 Regulation of Health Policy: Patient Safety and the States Joanna Weinberg, Lee H. Hilborne, Quang-Tuyen Nguyen Abstract In its 1999...regulating patient safety. The authors suggest that State patient safety regulation illustrates ongoing tensions in U.S. health policy, and conclude that

Selecting Representative Points in Normal Populations.

DTIC Science & Technology

1983-01-14

where values can be compared. A rather early paper on quantization is by Steinhaus [1956]. In that paper, he demonstrates the two necessary (but not...already noted that Steinhaus lists these two l<i<l conditions. These two necessary conditions for an optimal quantization suggest an iterative...Stanford, California. Steinhaus , H. (1956). Sur la division des corps materiels en parties. Bulletin De L’Academie Polonaise Des Sciences, Cl. III- Vol

Fabrication of High Thermal Conductivity NARloy-Z-Diamond Composite Combustion Chamber Liner for Advanced Rocket Engines

NASA Technical Reports Server (NTRS)

Bhat, Biliyar N.; Greene, Sandra E.; Singh, Jogender

2016-01-01

This paper describes the process development for fabricating a high thermal conductivity NARloy-Z-Diamond composite (NARloy-Z-D) combustion chamber liner for application in advanced rocket engines. The fabrication process is challenging and this paper presents some details of these challenges and approaches used to address them. Prior research conducted at NASA-MSFC and Penn State had shown that NARloy-Z-40%D composite material has significantly higher thermal conductivity than the state of the art NARloy-Z alloy. Furthermore, NARloy-Z-40 %D is much lighter than NARloy-Z. These attributes help to improve the performance of the advanced rocket engines. Increased thermal conductivity will directly translate into increased turbopump power, increased chamber pressure for improved thrust and specific impulse. Early work on NARloy-Z-D composites used the Field Assisted Sintering Technology (FAST, Ref. 1, 2) for fabricating discs. NARloy-Z-D composites containing 10, 20 and 40vol% of high thermal conductivity diamond powder were investigated. Thermal conductivity (TC) data. TC increased with increasing diamond content and showed 50% improvement over pure copper at 40vol% diamond. This composition was selected for fabricating the combustion chamber liner using the FAST technique.

Flight-Tested Prototype of BEAM Software

NASA Technical Reports Server (NTRS)

Mackey, Ryan; Tikidjian, Raffi; James, Mark; Wang, David

2006-01-01

Researchers at JPL have completed a software prototype of BEAM (Beacon-based Exception Analysis for Multi-missions) and successfully tested its operation in flight onboard a NASA research aircraft. BEAM (see NASA Tech Briefs, Vol. 26, No. 9; and Vol. 27, No. 3) is an ISHM (Integrated Systems Health Management) technology that automatically analyzes sensor data and classifies system behavior as either nominal or anomalous, and further characterizes anomalies according to strength, duration, and affected signals. BEAM (see figure) can be used to monitor a wide variety of physical systems and sensor types in real time. In this series of tests, BEAM monitored the engines of a Dryden Flight Research Center F-18 aircraft, and performed onboard, unattended analysis of 26 engine sensors from engine startup to shutdown. The BEAM algorithm can detect anomalies based solely on the sensor data, which includes but is not limited to sensor failure, performance degradation, incorrect operation such as unplanned engine shutdown or flameout in this example, and major system faults. BEAM was tested on an F-18 simulator, static engine tests, and 25 individual flights totaling approximately 60 hours of flight time. During these tests, BEAM successfully identified planned anomalies (in-flight shutdowns of one engine) as well as minor unplanned anomalies (e.g., transient oil- and fuel-pressure drops), with no false alarms or suspected false-negative results for the period tested. BEAM also detected previously unknown behavior in the F- 18 compressor section during several flights. This result, confirmed by direct analysis of the raw data, serves as a significant test of BEAM's capability.

Repair Options for Airframes

DTIC Science & Technology

2001-03-01

typical applications. This patch configuration can be best obtained with unidirectional tape . Woven material has greater formability and could also...1979. 15. Erdogan F and Arn K, "A Sandwich Plate With a Part-Through and a Debonding Crack," Engineering Fracture Mechanics, Vol. 4, June 1972. 16

Database Translator (DATALATOR) for Integrated Exploitation

DTIC Science & Technology

2010-10-31

Modelling in Information Systems Engineering. 2007, Berlin : Springer, pp. 39-58. 2. Arnon Rosenthal, Len Seligman . Pragmatics and Open Problems for Inter...2004, Vol. 2938 . 21. Ahuja, S., N. Carriero and D. Gelemte,. Linda and friends. IEEE Computer. August 1986, pp. 26- 32. 40 Next Generation Software

Quantitative Robust Control Engineering: Theory and Applications

DTIC Science & Technology

2006-09-01

30]. Gutman, PO., Baril , C. Neuman, L. (1994), An algorithm for computing value sets of uncertain transfer functions in factored real form...linear compensation design for saturating unstable uncertain plants. Int. J. Control, Vol. 44, pp. 1137-1146. [90]. Oldak S., Baril C. and Gutman

Microstructure and tribological properties of in situ synthesized TiC, TiN, and SiC reinforced Ti 3Al intermetallic matrix composite coatings on pure Ti by laser cladding

NASA Astrophysics Data System (ADS)

Pu, Yuping; Guo, Baogang; Zhou, Jiansong; Zhang, Shitang; Zhou, Huidi; Chen, Jianmin

2008-12-01

TiC, TiN, and SiC reinforced Ti 3Al intermetallic matrix composite (IMC) coatings were in situ synthesized on a pure Ti substrate by laser cladding. It was found that the surface hardness and the wear resistance of the Ti 3Al coating were improved by the formation of these Ti 3Al IMC coatings. The surface hardness and the wear resistance of the TiC/Ti 3Al IMC coatings increased with the increasing volume fraction of TiC powder. Under the same dry sliding test conditions, the wear resistance of TiC, TiN, and SiC reinforced Ti 3Al IMC coatings with 40 vol.% reinforced powder was in the following order: TiN/Ti 3Al IMC coating > TiC/Ti 3Al IMC coating > SiC/Ti 3Al IMC coating. It should be noted that both the TiC/Ti 3Al IMC coating with 40 vol.% TiC powder and the TiN/Ti 3Al coating with 40 vol.% TiN powder showed excellent wear resistance under 5 N normal load.

Human Systems Engineering and Program Success - A Retrospective Content Analysis

DTIC Science & Technology

2016-01-01

collected from the 546 documents and entered into SPSS Statistics Version 22.0 for Windows. HSI words within the sampled doc- uments ranged from zero to...engineers. The approach used a retrospective content analysis of documents from weapon systems acquisi- tion programs, namely Major Defense Acquisition...January 2016, Vol. 23 No. 1 : 78–101 January 2016 The interaction between humans and the systems they use affects program success, as well as life-cycle

The Science of and Advanced Technology for Cost-Effective Manufacture of High Precision Engineering Products. Volume 5. Automatic Generation of Process Outlines of Forming and Machining Processes.

DTIC Science & Technology

1986-08-01

THE SCIENCE OF AND ADVANCED TECHNOLOGY FOR COST-EFFECTIVE MANUFACTURE Lfl OF HIGH PRECISION ENGINEERING PRODUCTS N iA6/*N ONR Contract No. 83K0385...ADVANCED TECHNOLOGY FOR1 COST-EFFECTIVE MANUFACTURE OF1’ HIGH PRECISION ENGINEERING PRODUCTS ONR Contract No. 83K0385 Final Report Vol. 5 AUTOMATIC...Ck 53N Drawing #: 03116-6233 Raw Material: Iiz’ 500mm diameter and 3000mm length Ma, rial Alloy steel. high carbon content, quenched to Min 45Rc

Advances in cryogenic engineering. Vols. 37A & 37B - Proceedings of the 1991 Cryogenic Engineering Conference, Univ. of Alabama, Huntsville, June 11-14, 1991

NASA Technical Reports Server (NTRS)

Fast, Ronald W. (Editor)

1991-01-01

The present volume on advances in cryogenic engineering discusses heat and mass transfer in helium, heat transfer in cryogenic fluids, thermoacoustic oscillations, and insulation. Attention is given to applications of superconductivity with reference to magnetic stability and coil protection, cryogenic techniques, and refrigeration for electronics and superconducting systems. Topics addressed include compressors, expanders, and pumps for liquid helium, magnetic refrigerators, pulse tube refrigerators, and cryocoolers. Also examined are properties of cryogenic fluids, cryogenic applications in transportion and space science and technology, and cryogenic instrumentation.

Update of aircraft profile data for the Integrated Noise Model computer program, vol. 2 : appendix A aircraft takeoff and landing profiles

DOT National Transportation Integrated Search

1992-03-01

This report provides aircraft takeoff and landing profiles, aircraft aerodynamic performance coefficients and engine performance coefficients for the aircraft data base (Database 9) in the Integrated Noise Model (INM) computer program. Flight profile...

Feedback Flow Control for a Pitching Turret (Part II) (POSTPRINT)

DTIC Science & Technology

2010-01-01

FL, 2007. 2S. Gordeyev , T. E. Hayden, and E. J. Jumper , “Aero-Optical and Flow Measurements Over a Flat-Windowed Turret,” AIAA Journal, Vol. 45, No...public release; distribution unlimited. 13. SUPPLEMENTARY NOTES Conference presentation published in the Proceedings of the 48th AIAA Aerospace...Compressible effects are not present at this speed, but systems for controlling velocity fluctuations in incompressible flows will be effective in controlling

Exact Test of Independence Using Mutual Information

DTIC Science & Technology

2014-05-23

1000 × 0.05 = 50. Entropy 2014, 16 2844 Importantly, the permutation test, which does not preserve Markov order, resulted in 489 Type I errors! Using...Block 13 ARO Report Number Block 13: Supplementary Note © 2014 . Published in Entropy , Vol. Ed. 0 16, (7) (2014), (, (7). DoD Components reserve a...official Department of the Army position, policy or decision, unless so designated by other documentation. ... Entropy 2014, 16, 2839-2849; doi:10.3390

The Effects of Pacifist Norms on the Japanese Justice System

DTIC Science & Technology

2012-06-01

foreigners and juvenile offenders, with minimal success, and growing dissatisfaction with the police grew throughout the public... Delinquency , Vol. 39 No. 3, July 1993. 39 domestic pricing and restrict the outbreak of AIDS in the 1980s and 90s.100 With the previously noted nation...pacifist methods and low crime rates has been so delinquent in this area we must take into account the historical and normative perspectives that

Cavitation-Resistant Coatings for Hydropower Turbines

DTIC Science & Technology

2011-06-01

jay, GA . The Corps’ corporate practice has been almost exclusively to use 308 and 309 weld rod for cavitation repair. No other material has been...Turbines and Pumps : A Technical Note, Journal of Thermal Spray Technology, Vol. 14(2): 177–182 (June 2005). 6. C. L. Cheng, C.T. Webster, and J.Y...Tested on a Venturi Cavitation Testing Machine, Denver, CO: Bureau of Rec- lamation, Research Laboratory and Services Division (January 1994). 9. O. F

Modeling of Inelastic Collisions in a Multifluid Plasma: Excitation and Deexcitation

DTIC Science & Technology

2016-05-31

AVAILABILITY STATEMENT Approved for public release; distribution unlimited 13. SUPPLEMENTARY NOTES For publication in Physics of Plasma Vol #22, Issue...the fundamental physical processes may be individually known, it is not always clear how their combination affects the overall operation, or at what...arises from the complexity of the physical processes needed to be captured in the model. The required level of detail of the CR model is typically not

IAPD: Integrated Adaptive and Proactive Defense against Stealthy Botnets

DTIC Science & Technology

2012-12-28

in Communications , IEEE Journal on, vol. 9, pp. 1024 –1039, sep 1991. [ 11 ] R. G. Gallager, Poisson Processes, class notes, available online at http...transmitted by the destination radio . This ACK is automatically transmitted at the end of the 3 10 00 01 00 Fig. 2. Covert communication : A warden...spyware, disallowing the legitimate messages to route via the communication channel. Unless the secret trigger combination is known and the radio is under

Promotion Opportunities of Minorities to the Controlled Grades in the Navy Nurse Corps

DTIC Science & Technology

1992-12-01

and Smith, in their book Modern Labor Economics (1991), note two types of wage differential with different sources and, therefore, potentially...Role Strain," Health Services Research, Vol. 24, No. 5, December, 1989, p. 693-707. Ehrenberg, Ronald G., and Smith, Robert S., Modern Labor ... Economics : Theory and Public Policy, Fourth Edition, HarperCollins Publishers, New York, 1991. Felder, Emma, and Riesch, Susan, "The Status of Minority Nurses

Preliminary Structural Design - Defining the Design Space

DTIC Science & Technology

1993-02-01

York, 1949 7. Rosenblatt, R., Prnciples of Neurodynamics , New York, Spartan Books, 1959 8. Swift, R.,"Structural Design Using Neural Networks," Ph.D...Explorations in the Microstructure of Cognition . Vol. 1 Foundations D. E. Rumelhart and J.L. McClelland Editors, MIT Press, 1986 40. Parker, D. B...Processing: Explorations in the Microstructure of Cognition , MIT Press 1986 45. Schittkowski, K., Nonlinear o a gmi codes Lecture Notes in Economics and

The SED in the 1980’s -- New Program and Statutes for the Party

DTIC Science & Technology

1977-08-17

cit., p 294. 85. Protocol, Vol 1, p 40. 86. " Scientific Communism," loc. cit., p 295. 87. Zatsepilin, V.G., "Sorevnovaniye dvukh mirovykh sistem ...Covered 14. 15. Supplementary Notes 16. Abstracts The report contains an analysis by the West German Federal Institute for Eastern Scientific ...for Eastern Scientific and International Studies] CONTENTS PAGE Summary -*- I. Historical Background 5 II. Discussion of Party Documents 6 1

NLC Working Meetings

Science.gov Websites

TSETs Magnet Systems Cherrill Spencer Notes J C Vacuum Carl Rago Notes J C Supports & Movers Nancy Yu * Notes J C Installation Notes J C Manufacturing Morry Munro Notes J C Collimators & Dumps Eric Doyle Notes J C RF Distribution Engineering Notes M N Theory Perry Wilson - - Wednesday 10:30 A

A Stochastic Mixing Model for Predicting Emissions in a Direct Injection Diesel Engine.

DTIC Science & Technology

1986-09-01

of chemical reactors. The fundamental concept of these models is coalescence/dis- persion micromixing . C1] Details of this method are provided in Appen...Togby,A.H., "Monte Carlo Methods of Simulating Micromixing in Chemical Reactors", Chemical Engineering Science, Vol.27, p.1 4 97, 1972. 46. Kattan,A...on a molecular level. 2. Micromixing or stream mixing refers to the mixing of particles on a molecular level. Until the coalescence and dispersion

Socio-Technical Perspective on Interdisciplinary Interactions During the Development of Complex Engineered Systems

NASA Technical Reports Server (NTRS)

McGowan, Anna-Maria R.; Daly, Shanna; Baker, Wayne; Papalambros, panos; Seifert, Colleen

2013-01-01

This study investigates interdisciplinary interactions that take place during the research, development, and early conceptual design phases in the design of large-scale complex engineered systems (LaCES) such as aerospace vehicles. These interactions, that take place throughout a large engineering development organization, become the initial conditions of the systems engineering process that ultimately leads to the development of a viable system. This paper summarizes some of the challenges and opportunities regarding social and organizational issues that emerged from a qualitative study using ethnographic and survey data. The analysis reveals several socio-technical couplings between the engineered system and the organization that creates it. Survey respondents noted the importance of interdisciplinary interactions and their benefits to the engineered system as well as substantial challenges in interdisciplinary interactions. Noted benefits included enhanced knowledge and problem mitigation and noted obstacles centered on organizational and human dynamics. Findings suggest that addressing the social challenges may be a critical need in enabling interdisciplinary interactions

Engineered Bio-Molecular Nano-Devices/Systems

DTIC Science & Technology

2009-03-01

molecules with proper size will be captured by BCD and produce current blockage events, including, e.g., ibuprofen and thalidomide [37]. However, since...detection of enantiomers ," J. Am. Chem. Soc, vol. 128, pp. 10684-10685, 2006. [38] F. Sachs, J. Neil, and N. Barkakati, "The Automated-Analysis of

Case Studies of Navigation Channel and Port Sedimentation

DTIC Science & Technology

2011-01-14

Engineering Supplement to Limited Reevaluation Report, Vol. II (1995) 1/14/2011 18 MCNP  Hypotheses Why is channel shoaling more than anticipated? (1...activities have modified shoaling patterns and magnitudes (trawling, dredging and disposal, subsidence/fluid withdrawal). MCNP Hypotheses Why is channel

Manpower and the Minority Student. Regional Spotlight Vol. XI, No. 1.

ERIC Educational Resources Information Center

Anderson, Laura

Market saturation and diminishing opportunities are imminent in fields heavily favored by blacks in college: the social sciences, home economics and education. Future opportunities will come in fields presently unpopular or unknown to blacks: engineering, accounting, library science, urban and regional planning, health professions, and computer…

Erosion Control of Scour during Construction. Report 8. Summary Report.

DTIC Science & Technology

1985-01-01

the breakwaters. Experiments were conducted by Hotta and Marui (1976) to investigate characteristics of the local scour; and it was found that local... Marui , N. 1976. "Local Scour and Current Around a Porous Breakwater," Proceedings, Fifteenth Conference on Coastal Engineering, Honolulu, Hawaii, Vol II

Coated 4340 Steel

DTIC Science & Technology

2013-08-26

Magazine, 2004, Vol. 60, No. 68, pp. 7-11. 2. A. Wrigley: Aerospace Metals, American Metal Market , of May 1994. 3. L. L. Sherir: in Corrosion 1...Electrochemistry and Engineering, ASTM STP 801, T. W. Crooker and B. N Leis, Eds., American Society for Testing and Materials, 1983, pp. 5-25. 8. B. Fitzsimons

40 CFR 1033.625 - Special certification provisions for non-locomotive-specific engines.

Code of Federal Regulations, 2014 CFR

2014-07-01

... name of the engine manufacturer and engine family identifier for the engines. (ii) A brief engineering... proprietary engine software. Note that this allowance to separately submit some of the information required by...

40 CFR 1033.625 - Special certification provisions for non-locomotive-specific engines.

Code of Federal Regulations, 2012 CFR

2012-07-01

... name of the engine manufacturer and engine family identifier for the engines. (ii) A brief engineering... proprietary engine software. Note that this allowance to separately submit some of the information required by...

40 CFR 1033.625 - Special certification provisions for non-locomotive-specific engines.

Code of Federal Regulations, 2013 CFR

2013-07-01

... name of the engine manufacturer and engine family identifier for the engines. (ii) A brief engineering... proprietary engine software. Note that this allowance to separately submit some of the information required by...

Soliton Dynamics of an Atomic Spinor Condensate on a Ring Lattice

DTIC Science & Technology

2013-02-22

REPORT Soliton dynamics of an atomic spinor condensate on a Ring Lattice 14. ABSTRACT 16. SECURITY CLASSIFICATION OF: We study the dynamics of...8/98) Prescribed by ANSI Std. Z39.18 - Soliton dynamics of an atomic spinor condensate on a Ring Lattice Report Title ABSTRACT We study the dynamics...Report Number Soliton dynamics of an atomic spinor condensat Block 13: Supplementary Note © 2013 . Published in Physical Review A (accepted), Vol. Ed

Pseudorandom Number Generators for Mobile Devices: An Examination and Attempt to Improve Randomness

DTIC Science & Technology

2013-09-01

Notes in Computer Science (LNCS), Vol. 4341), (Hanoi, Vietnam: Springer, 2006), 260–270. 36 Simon R. Blackburn , “The Linear Complexity of the Self... Blackburn , Simon R. ‘The Linear Complexity of the Self-Shrinking Generator.” IEEE Trans. Inf. Theory, 45 (September 1999). Blum, Leonore, Manuel...afloat when the waters have been rough! xv THIS PAGE INTENTIONALLY LEFT BLANK xvi I. INTRODUCTION When the average man thinks about war and

Proceedings of the NATO IST-128 Workshop: Assessing Mission Impact of Cyberattacks Held in Istanbul, Turkey on 15-17 June 2015

DTIC Science & Technology

2015-12-01

combine satisficing behaviour with learning and adaptation through environmental feedback. This a sequential decision making with one alternative...next action that an opponent will most likely take in a strategic interaction. Also, cognitive models derived from instance- based learning theory (IBL... through instance- based learning . In Y. Li (Ed.), Lecture Notes in Computer Science (Vol. 6818, pp. 281-293). Heidelberg: Springer Berlin. Gonzalez, C

Color and Luminance Asymmetries in the Clear Sky

DTIC Science & Technology

2003-01-20

differences directly from x, y, and Y in the perceptually anisotropic CIE XYZ color space, we first map this data into the isotropic CIELUV color...2 v*1/ 2 . 20 January 2003 Vol. 42, No. 3 APPLIED OPTICS 459 L*, u*, v* are the CIELUV space’s orthogonal coor- dinates, and L*, u*, v...are the corresponding differences between coordinates of the two light sources being compared. Note that 3–5 CIELUV color-difference units are often

Fuel Effects on Gas Turbine Combustion

DTIC Science & Technology

1983-01-01

consistent with this model. However, the results of an experimental study by Naegeli and Moses [36] suggest that the picture will be more complicated for fuels...It is well established that smoking tendency increases with reduction in hydrogen content [51]. However, it is of interest to note that Naegeli and...Combustion Conditions, J. Eng. Power, "Vol. 102, pp. 403-408, April 1980. 36. Naegeli , D. W. and Effect of Fuel Molecular Structure on C. A. roses, Soot

Enhancements of thermal conductivities with Cu, CuO, and carbon nanotube nanofluids and application of MWNT/water nanofluid on a water chiller system

NASA Astrophysics Data System (ADS)

Liu, Minsheng; Lin, Mark Chingcheng; Wang, Chichuan

2011-12-01

In this study, enhancements of thermal conductivities of ethylene glycol, water, and synthetic engine oil in the presence of copper (Cu), copper oxide (CuO), and multi-walled carbon nanotube (MWNT) are investigated using both physical mixing method (two-step method) and chemical reduction method (one-step method). The chemical reduction method is, however, used only for nanofluid containing Cu nanoparticle in water. The thermal conductivities of the nanofluids are measured by a modified transient hot wire method. Experimental results show that nanofluids with low concentration of Cu, CuO, or carbon nanotube (CNT) have considerably higher thermal conductivity than identical base liquids. For CuO-ethylene glycol suspensions at 5 vol.%, MWNT-ethylene glycol at 1 vol.%, MWNT-water at 1.5 vol.%, and MWNT-synthetic engine oil at 2 vol.%, thermal conductivity is enhanced by 22.4, 12.4, 17, and 30%, respectively. For Cu-water at 0.1 vol.%, thermal conductivity is increased by 23.8%. The thermal conductivity improvement for CuO and CNT nanofluids is approximately linear with the volume fraction. On the other hand, a strong dependence of thermal conductivity on the measured time is observed for Cu-water nanofluid. The system performance of a 10-RT water chiller (air conditioner) subject to MWNT/water nanofluid is experimentally investigated. The system is tested at the standard water chiller rating condition in the range of the flow rate from 60 to 140 L/min. In spite of the static measurement of thermal conductivity of nanofluid shows only 1.3% increase at room temperature relative to the base fluid at volume fraction of 0.001 (0.1 vol.%), it is observed that a 4.2% increase of cooling capacity and a small decrease of power consumption about 0.8% occur for the nanofluid system at a flow rate of 100 L/min. This result clearly indicates that the enhancement of cooling capacity is not just related to thermal conductivity alone. Dynamic effect, such as nanoparticle dispersion may effectively augment the system performance. It is also found that the dynamic dispersion is comparatively effective at lower flow rate regime, e.g., transition or laminar flow and becomes less effective at higher flow rate regime. Test results show that the coefficient of performance of the water chiller is increased by 5.15% relative to that without nanofluid.

Enhancements of thermal conductivities with Cu, CuO, and carbon nanotube nanofluids and application of MWNT/water nanofluid on a water chiller system

PubMed Central

2011-01-01

In this study, enhancements of thermal conductivities of ethylene glycol, water, and synthetic engine oil in the presence of copper (Cu), copper oxide (CuO), and multi-walled carbon nanotube (MWNT) are investigated using both physical mixing method (two-step method) and chemical reduction method (one-step method). The chemical reduction method is, however, used only for nanofluid containing Cu nanoparticle in water. The thermal conductivities of the nanofluids are measured by a modified transient hot wire method. Experimental results show that nanofluids with low concentration of Cu, CuO, or carbon nanotube (CNT) have considerably higher thermal conductivity than identical base liquids. For CuO-ethylene glycol suspensions at 5 vol.%, MWNT-ethylene glycol at 1 vol.%, MWNT-water at 1.5 vol.%, and MWNT-synthetic engine oil at 2 vol.%, thermal conductivity is enhanced by 22.4, 12.4, 17, and 30%, respectively. For Cu-water at 0.1 vol.%, thermal conductivity is increased by 23.8%. The thermal conductivity improvement for CuO and CNT nanofluids is approximately linear with the volume fraction. On the other hand, a strong dependence of thermal conductivity on the measured time is observed for Cu-water nanofluid. The system performance of a 10-RT water chiller (air conditioner) subject to MWNT/water nanofluid is experimentally investigated. The system is tested at the standard water chiller rating condition in the range of the flow rate from 60 to 140 L/min. In spite of the static measurement of thermal conductivity of nanofluid shows only 1.3% increase at room temperature relative to the base fluid at volume fraction of 0.001 (0.1 vol.%), it is observed that a 4.2% increase of cooling capacity and a small decrease of power consumption about 0.8% occur for the nanofluid system at a flow rate of 100 L/min. This result clearly indicates that the enhancement of cooling capacity is not just related to thermal conductivity alone. Dynamic effect, such as nanoparticle dispersion may effectively augment the system performance. It is also found that the dynamic dispersion is comparatively effective at lower flow rate regime, e.g., transition or laminar flow and becomes less effective at higher flow rate regime. Test results show that the coefficient of performance of the water chiller is increased by 5.15% relative to that without nanofluid. PMID:21711787

Enhancements of thermal conductivities with Cu, CuO, and carbon nanotube nanofluids and application of MWNT/water nanofluid on a water chiller system.

PubMed

Liu, Minsheng; Lin, Mark Chingcheng; Wang, Chichuan

2011-04-05

In this study, enhancements of thermal conductivities of ethylene glycol, water, and synthetic engine oil in the presence of copper (Cu), copper oxide (CuO), and multi-walled carbon nanotube (MWNT) are investigated using both physical mixing method (two-step method) and chemical reduction method (one-step method). The chemical reduction method is, however, used only for nanofluid containing Cu nanoparticle in water. The thermal conductivities of the nanofluids are measured by a modified transient hot wire method. Experimental results show that nanofluids with low concentration of Cu, CuO, or carbon nanotube (CNT) have considerably higher thermal conductivity than identical base liquids. For CuO-ethylene glycol suspensions at 5 vol.%, MWNT-ethylene glycol at 1 vol.%, MWNT-water at 1.5 vol.%, and MWNT-synthetic engine oil at 2 vol.%, thermal conductivity is enhanced by 22.4, 12.4, 17, and 30%, respectively. For Cu-water at 0.1 vol.%, thermal conductivity is increased by 23.8%. The thermal conductivity improvement for CuO and CNT nanofluids is approximately linear with the volume fraction. On the other hand, a strong dependence of thermal conductivity on the measured time is observed for Cu-water nanofluid. The system performance of a 10-RT water chiller (air conditioner) subject to MWNT/water nanofluid is experimentally investigated. The system is tested at the standard water chiller rating condition in the range of the flow rate from 60 to 140 L/min. In spite of the static measurement of thermal conductivity of nanofluid shows only 1.3% increase at room temperature relative to the base fluid at volume fraction of 0.001 (0.1 vol.%), it is observed that a 4.2% increase of cooling capacity and a small decrease of power consumption about 0.8% occur for the nanofluid system at a flow rate of 100 L/min. This result clearly indicates that the enhancement of cooling capacity is not just related to thermal conductivity alone. Dynamic effect, such as nanoparticle dispersion may effectively augment the system performance. It is also found that the dynamic dispersion is comparatively effective at lower flow rate regime, e.g., transition or laminar flow and becomes less effective at higher flow rate regime. Test results show that the coefficient of performance of the water chiller is increased by 5.15% relative to that without nanofluid.

Hamiltonian flows with random-walk behaviour originating from zero-sum games and fictitious play

NASA Astrophysics Data System (ADS)

van Strien, Sebastian

2011-06-01

In this paper we introduce Hamiltonian dynamics, inspired by zero-sum games (best response and fictitious play dynamics). The Hamiltonian functions we consider are continuous and piecewise affine (and of a very simple form). It follows that the corresponding Hamiltonian vector fields are discontinuous and multi-valued. Differential equations with discontinuities along a hyperplane are often called 'Filippov systems', and there is a large literature on such systems, see for example (di Bernardo et al 2008 Theory and applications Piecewise-Smooth Dynamical Systems (Applied Mathematical Sciences vol 163) (London: Springer); Kunze 2000 Non-Smooth Dynamical Systems (Lecture Notes in Mathematics vol 1744) (Berlin: Springer); Leine and Nijmeijer 2004 Dynamics and Bifurcations of Non-smooth Mechanical Systems (Lecture Notes in Applied and Computational Mechanics vol 18) (Berlin: Springer)). The special feature of the systems we consider here is that they have discontinuities along a large number of intersecting hyperplanes. Nevertheless, somewhat surprisingly, the flow corresponding to such a vector field exists, is unique and continuous. We believe that these vector fields deserve attention, because it turns out that the resulting dynamics are rather different from those found in more classically defined Hamiltonian dynamics. The vector field is extremely simple: outside codimension-one hyperplanes it is piecewise constant and so the flow phit piecewise a translation (without stationary points). Even so, the dynamics can be rather rich and complicated as a detailed study of specific examples show (see for example theorems 7.1 and 7.2 and also (Ostrovski and van Strien 2011 Regular Chaotic Dynf. 16 129-54)). In the last two sections of the paper we give some applications to game theory, and finish with posing a version of the Palis conjecture in the context of the class of non-smooth systems studied in this paper. To Jacob Palis on his 70th birthday.

Characteristics of particulate emissions from a diesel generator fueled with varying blends of biodiesel and fossil diesel.

PubMed

Tsai, Jen-Hsiung; Chen, Shui-Jen; Huang, Kuo-Lin; Lee, Wen-Jhy; Kuo, Wen-Chien; Lin, Wen-Yinn

2011-01-01

This study investigated the particulate matter (PM), particle-bound carbons, and polycyclic aromatic hydrocarbons (PAHs) emitted from a diesel-engine generator fuelled with blends of pure fossil diesel oil (D100) and varying percentages of waste-edible-oil biodiesel (W10, 10 vol %; W20, 20 vol %; W30, 30 vol %; and W50, 50 vol %) under generator loads of 0, 1.5, and 3 kW. On average, the PM emission factors of all blends was 30.5 % (range, 13.7-52.3 %) lower than that of D100 under the tested loads. Substituting pure fossil diesel oil with varying percentages of waste-edible-oil biodiesel reduced emissions of particle-bound total carbon (TC) and elemental carbon (EC). The W20 blend had the lowest particle-bound organic carbon (OC) emissions. Notably, W10, W20, and W30 also had lower Total-PAH emissions and lower total equivalent toxicity (Total-BaP(eq)) compared to D100. Additionally, the brake-specific fuel consumption of the generator correlated positively with the ratio of waste-edible-oil biodiesel to pure fossil diesel. However, generator energy efficiency correlated negatively with the ratio of waste-edible-oil biodiesel to pure fossil diesel.

A Preliminary Investigation of a Fluid-Filled ECG-Triggered Anti-G Suit.

DTIC Science & Technology

1994-02-01

the abdomen, anterior thighs, and calves. In Australia, Dr. F.S. Cotton of Sydney developed a pneumatic anti-G suit using the Royal Australian Air...Acceleration Stress: Model Studies and Preliminary Experiments. IEEE Transactions on Biomedical Engineering, Feb 1985, Vol BME -32(2):158-165. 10 13. Lambert

Erosion Control of Scour during Construction; Report 2. Literature Survey of Theoretical, Experimental, and Prototype Investigations.

DTIC Science & Technology

1980-08-01

induced currents around the breakwaters. Experiments were conducted by Hotta and Marui (1976) to investigate characteristics of the local scour; and it...on Oscillatory Boundary Layer Flow," Proceedings, Eleventh Conference on Coastal Engineering, London, England, Vol I, pp 467-486. Hotta, S., and Marui

Framework for Processing Videos in the Presence of Spatially Varying Motion Blur

DTIC Science & Technology

2016-02-10

Photogrammetric Engineering and Remote Sensing, vol. 71, no. 11, pp. 1285–1294, 2005. 3 [14] Le Yu, Dengrong Zhang, and Eun- Jung Holden, “A fast and...Xiaoyang Wang, Qiang Ji, Kishore K. Reddy, Mubarak Shah, Carl Vondrick, Hamed Pirsiavash, Deva Ramanan, Jenny Yuen, Antonio Tor- ralba, Bi Song, Anesco

Supporting C2 Research and Evaluation: An Infrastructure and its Potential Impact

DTIC Science & Technology

2011-06-01

Potential Impact,” Empirical Software Engineering, Vol. 10 No. 4, pp. 405-435, 2005. http://sir.unl.edu [16] J. O. Engene , Terrorism in Western...Evaluation and Conference: Proceedings of the 3rd-6th DARPA Workshops, Morgan Kaufman Publishers, 1996. … [16] J. O. Engene , Terrorism in Western Europe

Minimizing Losses in a Space Laser Power Beaming System

DTIC Science & Technology

2010-03-01

system was to inefficient for any practical power transfer applications ( Reiman , 1993:2). Shorter wavelengths are easier to direct and have led to the...OH. Winter Quarter 2009 Reiman , D. "Scanning the Past: A History of Electrical Engineering from the Past." n. pag. IEEE (Vol. 81, No. 6, 1993

40 CFR 1033.625 - Special certification provisions for non-locomotive-specific engines.

Code of Federal Regulations, 2010 CFR

2010-07-01

... and engine family identifier for the engines. (ii) A brief engineering analysis describing how the... engine software. Note that this allowance to separately submit some of the information required by § 1033...

40 CFR 1033.625 - Special certification provisions for non-locomotive-specific engines.

Code of Federal Regulations, 2011 CFR

2011-07-01

... and engine family identifier for the engines. (ii) A brief engineering analysis describing how the... engine software. Note that this allowance to separately submit some of the information required by § 1033...

Analyzing CRISM hyperspectral imagery using PlanetServer.

NASA Astrophysics Data System (ADS)

Figuera, Ramiro Marco; Pham Huu, Bang; Minin, Mikhail; Flahaut, Jessica; Halder, Anik; Rossi, Angelo Pio

2017-04-01

Mineral characterization of planetary surfaces bears great importance for space exploration. In order to perform it, orbital hyperspectral imagery is widely used. In our research we use Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) [1] TRDR L observations with a spectral range of 1 to 4 µm. PlanetServer comprises a server, a web client and a Python client/API. The server side uses the Array DataBase Management System (DBMS) Raster Data Manager (Rasdaman) Community Edition [2]. OGC standards such as the Web Coverage Processing Service (WCPS) [3], an SQL-like language capable to query information along the image cube, are implemented in the PetaScope component [4]. The client side uses NASA's Web World Wind [5] allowing the user to access the data in an intuitive way. The client consists of a globe where all cubes are deployed, a main menu where projections, base maps and RGB combinations are provided, and a plot dock where the spectral information is shown. The RGB combinator tool allows to do band combination such as the CRISM products [6] using WCPS. The spectral information is retrieved using WCPS and shown in the plot dock/widget. The USGS splib06a library [7] is available to compare CRISM vs. laboratory spectra. The Python API provides an environment to create RGB combinations that can be embedded into existing pipelines. All employed libraries and tools are open source and can be easily adapted to other datasets. PlanetServer stands as a promising tool for spectral analysis on planetary bodies. M3/Moon and OMEGA datasets will be soon available. [1] S. Murchie et al., "Compact Connaissance Imaging Spectrometer for Mars (CRISM) on Mars Reconnaissance Orbiter (MRO)," J. Geophys. Res. E Planets,2007. [2] P. Baumann, A. Dehmel, P. Furtado, R. Ritsch, and N. Widmann, "The multidimensional database system RasDaMan," ACM SIGMOD Rec., vol. 27, no. 2, pp. 575-577, Jun. 1998. [3] P. Baumann, "The OGC web coverage processing service (WCPS) standard," Geoinformatica, vol. 14, no. 4, Jul. 2010. [4] A. Aiordǎchioaie and P. Baumann, "PetaScope: An open-source implementation of the OGC WCS Geo service standards suite," Lect. Notes Comput. Sci. (including Subser. Lect. Notes Artif. Intell. Lect. Notes Bioinformatics), vol. 6187 LNCS, pp. 160-168, Jun. 2010. [5] P. Hogan, C. Maxwell, R. Kim, and T. Gaskins, "World Wind 3D Earth Viewing," Apr. 2007. [6] C. E. Viviano-Beck et al., "Revised CRISM spectral parameters and summary products based on the currently detected mineral diversity on Mars," J. Geophys. Res. E Planets, vol. 119, no. 6, pp. 1403-1431, Jun. 2014. [7] R. N. Clark et al., "USGS digital spectral library splib06a: U.S. Geological Survey, Digital Data Series 231," 2007. [Online]. Available: http://speclab.cr.usgs.gov/spectral.lib06.

How automatic is the musical stroop effect? Commentary on “the musical stroop effect: opening a new avenue to research on automatisms” by l. Grégoire, P. Perruchet, and B. Poulin-Charronnat (Experimental Psychology, 2013, vol. 60, pp. 269–278).

PubMed

Moeller, Birte; Frings, Christian

2014-01-01

Grégoire, Perruchet, and Poulin-Charronnat (2013) investigated a musical variant of the reversed Stroop effect. According to the authors, one big advantage of this variant is that the automaticity of note naming can be better controlled than in other Stroop variants as musicians are very practiced in note reading whereas non-musicians are not. In this comment we argue that at present the exact impact of automaticity in this Stroop variant remains somewhat unclear for at least three reasons, namely due to the type of information that is automatically retrieved when notes are encountered, due to the possible influence of object-based attention, and finally due to the fact that the exact influence of expertise on interference cannot be pinpointed with an extreme group design.

FAA Air Traffic Control Operations Concepts. Volume 3. ISSS (Initial Sector Suite System) En Route Controllers. Change 1

DTIC Science & Technology

1988-07-29

COM I NL OPERAT I•ORAL A1.4.5.6 CT FS W 0A CC RECEVE FLIGHT PLAN AMENDMENT VERBALLY FORWARDED A1,6.10O.3 - EWIER DISPLAY AE4MN M ESSAGE ON CONSOLE...COITROLLER NOTE x N xNXX 03/09/88 A1.1.8.50 UPDATE! REVISE N 07/05/88 CONTROLLER NOTE DOT/FAAIAP.87-01 (VOL#3) 6 July 1987 B3-4 TASK STATEMENTS Coordinct...TO TRANSIENT ’ I , 0/88 COM ~PUTER FAILURES II XXX 0186 A1.6.5.1 CETECT ’NcJ-A%,EPTAN0E x j I XXXX 05/18/67 OF INPUJTDAiA III A1.6.3.2 !NFCP.M

Further results from PIXE analysis of inks in Galileo's notes on motion

NASA Astrophysics Data System (ADS)

Del Carmine, P.; Giuntini, L.; Hooper, W.; Lucarelli, F.; Mandò, P. A.

1996-06-01

We have recently analysed the inks in some of the folios of Vol. 72 of Manoscritti galileiani, kept at the Biblioteca Nazionale Centrale di Firenze, which contains a collection of loose handwritten sheets containing undated notes, data from experiments and propositions on the problems of motion from different periods of Galileo's life. This paper reports specific results obtained from the analysis of some of these propositions, which allowed to make a contribution to their chronological attribution and therefore to the solution of some historical controversies. Even in the case where the "absolute" chronological attributions could not be made on the basis of comparison with dated documents, the PIXE results provided useful information to deny or confirm the hypothesis that different propositions were written in the same or in different periods.

Teller Award Acceptance Speech (LIRPP Vol. 12)

NASA Astrophysics Data System (ADS)

McCrory, Robert L.

2016-10-01

It is indeed an honor to receive an award named for such an accomplished and famous physicist who is present with us today, Dr. Edward Teller. In thinking over what to say on this occasion, I noted that the Teller Award was given for pioneering research in controlled fusion, in controlling fusion for the benefit of mankind. I think everyone in this audience certainly would agree that this lofty goal is truly one of the unconquered, grand challenges in applied physics...

Computational Fluid Dynamics: Algorithms and Supercomputers

DTIC Science & Technology

1988-03-01

1985. 1.2. Pulliam, T., and Steger, J. , Implicit Finite Difference Simulations of Three Dimensional Compressible Flow, AIAA Journal , Vol. 18, No. 2...approaches infinity, assuming N is bounded. The question as to actual performance when M is finite and N varies, is a different matter. (Note: the CYBER...PARTICLE-IN-CELL 9i% 3.b7 j.48 WEATHER FORECAST 98% 3.77 3.55 SEISMIC MIGRATION 98% 3.85 3.45 MONTE CARLO 99% 3.85 3.75 LATTICE GAUGE 100% 4.00 3.77

The Best Defense Is a Good Offense: Conducting Offensive Cyberoperations and the Law of Armed Conflict

DTIC Science & Technology

2014-02-13

Bradley and Goldsmith note that “despite its relatively amorphous nature, CIL [customary international law] has essentially the same binding force under...and Jack L. Goldsmith , Customary International Law as Federal Common Law: A Critique of the Modern Position, Harvard Law Review vol. 110, no. 4: 815...Law Institute, 1989), §102(2). 28 Bradley and Goldsmith , 818, citing Restatement of the Law Third, The Foreign Relations Law of the United States

Experimental Validation of Source Temperature Modulation Via a Thermal Switch in Thermal Energy Harvesting (Preprint)

DTIC Science & Technology

2007-12-01

International Journal of Exergy , Vol. 2, No. 2, 2005, pp. 120-145. 8Hoyos, G.E., Rao, K.R., and Jerger, D., “Fast Transient Response of Novel...DATES COVERED (From - To) December 2007 Journal Article Preprint 31 July 2005 – 31 July 2007 5a. CONTRACT NUMBER In-house 5b. GRANT NUMBER 4...distribution unlimited. 13. SUPPLEMENTARY NOTES Journal article submitted to the Journal of Thermophysics and Heat Transfer. The U.S. Government is joint

Amplifying the Pacific Climate System Response to a Small 11-Year Solar Cycle Forcing

DTIC Science & Technology

2009-08-28

www.sciencemag.org SCIENCE VOL 325 28 AUGUST 2009 1117 REPORTS The role of theQuasi-biennial Oscillation ( QBO ) in the response to solar forcing has been noted...in earlier studies (3). A set of experiments with the two WACCM model versions with a prescribed QBO has been carried out, and results from those...those presented here without the QBO , but the prescribed QBO shows improvements in the strato- spheric response compared to observations. Though the

Study of Turbulence by Photon Correlation Spectroscopy

DTIC Science & Technology

1991-10-23

Hepp, and H . A. Weidenmuller (Springer Lecture Notes in Physics, Vol 12, 1972) p. 402. [17] A. Onuki , Phys. Lett. 127, 143 (1988). [18) K. R...of Turbulence", (W. I. Goldburg, P. Tong, and H . K. Pak), Physica D 38 (1989) 134-140. 2. "Scaling Laws in Weak Turbulence", (with H . K. Pak, W. I...Goldburg and P. Tong), (in press). 3. "An Experimental Study of Weak Turbulence", (with H . K. Pak and W. I. Goldburg), "Fluid Dynamics Research" (in

Proceedings of the Tenth Annual National Conference on Ada Technology. Held in Arlington, VA, on February 24-28, 1992

DTIC Science & Technology

1992-02-01

Newsletter, Vol. 5, No. 1, January 1983 be translated from HAL’S. 4. Klumpp, Allan R., An Ada Linear Algebra Software development costs for using the...a linear algebra approach to As noted above, the concept of the problem and address the problem of unitdimensional analysis extends beyond problems...you will join us again next year. The 11th Annual Conference on Ada Technology (1993) will be held here at the Hyatt Regency - Crystal City

Business Re-Engineering: Lessons Learned from the U.S. Army Corps of Engineers Modernization Program

DTIC Science & Technology

1992-06-01

and Management, Vol 7, 1984. Yang, Dori "Boeing Knocks Down the Wall Between the Dreamers and the Doers", Business Week, 28 Oct 1991, p. 12 0 . "The...Management (CIM) Initiative that have lead to a number of tools such as Activity Based Costing (ABC) and IDEF that may be used as building blocks for a re...Tung X. Bui 646-2630 AS/BD DD FORM 1473.84 MAR 83 APR edition may be used until exhausted SECURITY CLASSIFICATION OF THIS PAGE All other editions are

Demonstration of a Model-Based Technology for Monitoring Water Quality and Corrosion in Water-Distribution systems

DTIC Science & Technology

2016-12-01

Kamojjala, 2014, “Real-Time M0deling of Water Distribution Systems: A Case Study ,” Journal AWWA, Vol. 106, No. 9 (September 2014.) Feinauer, Lynn R...Quality and Corrosion in Water-Distribution Systems Final Report on Project F07-AR05 Co ns tr uc tio n En gi ne er in g R es ea rc h La bo ra to...Final Report on Project F07-AR05 Vicki L. Van Blaricum Construction Engineering Research Laboratory U.S. Army Engineer Research and Development Center

Generative Effects of Note-Taking during Science Lectures.

ERIC Educational Resources Information Center

Peper, Richard J.; Mayer, Richard E.

1986-01-01

In two experiments subjects were required to either take notes or not take notes while viewing a videotaped lecture on automobile engines. Results produced a pattern of interaction in which note-takers performed better on far-transfer tasks such as problem solving but worse on near-transfer tasks. (Author/LMO)

Mechanical Properties and Wear Characteristics Al-ZrO2-SiCp and Graphite Hybrid Metal Matrix Composites

NASA Astrophysics Data System (ADS)

Nayak, S. K.; Mahanta, T.; Sahoo, J. K.; Mishra, A.

2018-03-01

Development of Aluminum Metal Matrix Co mposites (AMMCs) has been one of the major requirements in engineering applicat ions due to their excellent mechanical properties, light weight and high strength. In the present investigation, Stir casting technique has been used for fabrication of co mposites, taking Alu miniu m as parent metal, Silicon Carbide (SiCp) of 7 vol. % of 220 mesh size and 1.75 vol. % of graphite as reinforcements. The Zirconia content was varied as 2.75, 4.5 and 6 vol. % to fabricate three d ifferent types of hybrid composites. The tensile strength and hardness were measured in UTM and Vickers hardness tester respectively and the wear characteristics were studied in a pin on disc friction monitor under dry sliding condition against steel counter face. The tensile strength was found to be 90 MPa, 120 MPa, 130 MPa and hardness 80.25 VHN, 103.22 VHN, 103.77 VHN for 2.75, 4.5 and 6vol. % of Zirconia respectively. Fro m the above investigation, it is recommended that composition with Al, 7 %-SiCp, 1.75 % -Gr and 6 vol %-ZrO2 showed better mechanical p roperties i.e . h igh tensile strength (130MPa) and reasonably good hardness (103.77 VHN) . The co mposite with Al, 7 % - SiCp, 1.75 % -Gr and 6 %-ZrO2 is good for short run frictional applicat ion and the composite with Al, 7 %- SiCp, 1.75 % -Gr and 4.5 %- ZrO2 may be used for long run frictional applicat ions after testing.

Self-Regulated Learning Strategies of Engineering College Students While Learning Electric Circuit Concepts with Enhanced Guided Notes

ERIC Educational Resources Information Center

Lawanto, Oenardi; Santoso, Harry

2013-01-01

The current study evaluated engineering college students' self-regulated learning (SRL) strategies while learning electric circuit concepts using enhanced guided notes (EGN). Our goal was to describe how students exercise SRL strategies and how their grade performance changes after using EGN. Two research questions guided the study: (1) To what…

Advances in Thrust-Based Emergency Control of an Airplane

NASA Technical Reports Server (NTRS)

Creech, Gray; Burken, John J.; Burcham, Bill

2003-01-01

Engineers at NASA's Dryden Flight Research Center have received a patent on an emergency flight-control method implemented by a propulsion-controlled aircraft (PCA) system. Utilizing the preexisting auto-throttle and engine-pressure-ratio trim controls of the airplane, the PCA system provides pitch and roll control for landing an airplane safely without using aerodynamic control surfaces that have ceased to function because of a primary-flight-control-system failure. The installation of the PCA does not entail any changes in pre-existing engine hardware or software. [Aspects of the method and system at previous stages of development were reported in Thrust-Control System for Emergency Control of an Airplane (DRC-96-07), NASA Tech Briefs, Vol. 25, No. 3 (March 2001), page 68 and Emergency Landing Using Thrust Control and Shift of Weight (DRC-96-55), NASA Tech Briefs, Vol. 26, No. 5 (May 2002), page 58.]. Aircraft flight-control systems are designed with extensive redundancy to ensure low probabilities of failure. During recent years, however, several airplanes have exhibited major flight-control-system failures, leaving engine thrust as the last mode of flight control. In some of these emergency situations, engine thrusts were successfully modulated by the pilots to maintain flight paths or pitch angles, but in other situations, lateral control was also needed. In the majority of such control-system failures, crashes resulted and over 1,200 people died. The challenge lay in creating a means of sufficient degree of thrust-modulation control to safely fly and land a stricken airplane. A thrust-modulation control system designed for this purpose was flight-tested in a PCA an MD-11 airplane. The results of the flight test showed that without any operational control surfaces, a pilot can land a crippled airplane (U.S. Patent 5,330,131). The installation of the original PCA system entailed modifications not only of the flight-control computer (FCC) of the airplane but also of each engine-control computer. Inasmuch as engine-manufacturer warranties do not apply to modified engines, the challenge became one of creating a PCA system that does not entail modifications of the engine computers.

Geologic Setting of Mosul Dam and Its Engineering Implications

DTIC Science & Technology

2007-09-01

thought that an increase in vol- ume, produced during alteration of interbedded anhydrite to gypsum, generated sufficient pressure to fracture the...construction.. ..................................................................23 Figure 8. Geologic sections with water- pressure test values and...contains fragments or clasts of limestone, dolomite , or larger pieces of insoluble rocks of collapsed material. The upper portion of the accumulation

Modeling Exposure to Electromagnetic Fields with Realistic Anatomical Models: The Brooks Finite Difference Time Domain (FDTD)

DTIC Science & Technology

2008-02-01

1996. [15] Gambrill, C.S. DeAngelis M.L., Lu S-T. Error analysis of a thermometric microwave-dosimetry procedure. In: Blank M, editor. Electricity...Transactions on Biomedical Engineering, Vol. BME-31, No. 7, July 1984, 533-536. [18] Lu S-T, DeAngelis ML, Gambrill CS. Ocular microwave thermometric

Developing New Coastal Forest Restoration Products Based on Landsat, ASTER, and MODIS Data

DTIC Science & Technology

2010-06-01

hydrology, wildfire, and conversion to non-forest land use. In some cases, such forest disturbance has led to forest loss or loss of regeneration capacity...classification of bald cypress and tupelo gum trees in Thematic Mapper imagery,” Photogrammetric Engineering and Remote Sensing, vol. 63, pp. 717–725, 1997. [14

Single and Multiresponse Adaptive Design of Experiments with Application to Design Optimization of Novel Heat Exchangers

DTIC Science & Technology

2009-01-01

Single phase fluid flow in microchannels has been widely investigated ( Morini , 2006; Abdelaziz et al., 2008) and it was verified that the conventional...Optimization, Kluwer. 203 78. Morini , G. L., 2006, “Scaling Effects for Liquid Flows in Microchannels,” Heat Transfer Engineering, Vol. 27, No. 4, pp

COED Transactions, Vol. X, No. 11, November 1978. A Microprocesser-Based Interactive Learning System.

ERIC Educational Resources Information Center

Mitchell, Eugene E., Ed.

A Microcomputer-Implemented Design Aid and Simulator (MIDAS) has been developed and used as an interactive learning system by electrical engineering students at the freshman and sophomore level. Evaluation of the system indicates that a great potential exists in the area of dedicated, inexpensive, interactive learning systems. User acceptance has…

Engineering the Way to Becoming a Federal Engineer.

ERIC Educational Resources Information Center

Morgans, Carl J.

1991-01-01

Federal engineer tells engineering students how to become federal engineers and discusses the potential rewards and disadvantages of a civil service career. Notes that federal jobs are available for engineering graduates who are knowledgeable in the search process and who are persistent in seeking out such jobs. (NB)

ETRCF, TRA654, INTERIOR. CAMERA IS ON MAIN FLOOR. NOTE CRANE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ETR-CF, TRA-654, INTERIOR. CAMERA IS ON MAIN FLOOR. NOTE CRANE HOOKS. ELECTRICAL EQUIPMENT IS PART OF PAST EXPERIMENT. DOOR AT LEFT EDGE OF VIEW LEADS TO REACTOR SERVICE BUILDING, TRA-635. INL NEGATIVE NO. HD24-1-2. Mike Crane, Photographer, ca. 2003 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Safety Evaluation of Green Tea Polyphenols Consumption in Middle-aged Ovariectomized Rat Model.

PubMed

Shen, Chwan-Li; Brackee, Gordon; Song, Xiao; Tomison, Michael D; Finckbone, VelvetLee; Mitchell, Kelly T; Tang, Lili; Chyu, Ming-Chien; Dunn, Dale M; Wang, Jia-Sheng

2017-09-01

This work evaluates chronic safety in middle-aged ovariectomized rats supplemented with different dosages of green tea polyphenols (GTP) in drinking water. The experiment used 6-mo-old sham (n = 39) and ovariectomized (OVX, n = 143) female rats. All sham (n = 39) and 39 of the OVX animals received no GTP treatment and their samples were collected for outcome measures at baseline, 3 mo, and 6 mo (n = 13 per group for each). The remaining OVX animals were randomized into 4 groups receiving 0.15%, 0.5%, 1%, and 1.5% (n = 26 for each) of GTP (wt/vol), respectively, in drinking water for 3 and 6 mo. No mortality or abnormal treatment-related findings in clinical observations or ophthalmologic examinations were noted. No treatment-related macroscopic or microscopic findings were noted for animals administered 1.5% GTP supplementation. Throughout the study, there was no difference in the body weight among all OVX groups. In all OVX groups, feed intake and water consumption significantly decreased with GTP dose throughout the study period. At 6 mo, GTP intake did not affect hematology, clinical chemistry, and urinalysis, except for phosphorus and blood urea nitrogen (increased), total cholesterol, lactate dehydrogenase, and urine pH (decreased). This study reveals that the no-observed-adverse-effect level (NOAEL) of GTP is 1.5% (wt/vol) in drinking water, the highest dose used in this study. © 2017 Institute of Food Technologists®.

Procedure Training Aid for the SH-3D/H Normal Start Checklist.

DTIC Science & Technology

1982-02-01

1 Engine .... START Pupoe: To make a Normal Start of No. 1 engine. :4 14. Action Pilot/Copilot verify lite -off by noting rapid rise in T5 and Nq and...Nf increasinq 15. Note Normal starts are characterized by 7 0-75D0 T5 in I seconds after lite -off 16. If T5 is incrasinn too rapidlyv or appears to...Pumps 206 NORMAL START CHECKLIST ITEM NO. 23. No. I Ergine ... TART 14. Action Pilot/Copilot verify lite -off by noting ra ’pid rise in and Ng and Nf

FAST CHOPPER BUILDING, TRA665, INTERIOR. LOWER (DETECTOR) LEVEL. NOTE BRICKEDIN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

FAST CHOPPER BUILDING, TRA-665, INTERIOR. LOWER (DETECTOR) LEVEL. NOTE BRICKED-IN WINDOW ON MTR SIDE. USED FOR STORAGE OF LEAD BRICKS AFTER EXPERIMENTAL NEUTRON INSTRUMENTS WERE REMOVED. SIGN SAYS "IN-PROCESS LEAD SOURCE STORAGE." INL NEGATIVE NO. HD-42-2. Mike Crane, Photographer, 3/2004 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Physicochemical and sensory characteristics of fat-free goat milk yogurt with added stabilizers and skim milk powder fortification.

PubMed

Bruzantin, F P; Daniel, J L P; da Silva, P P M; Spoto, M H F

2016-05-01

Goat milk yogurt has a less consistent coagulum compared with cow milk yogurt; furthermore, the presence of goat milk in foodstuffs imparts a characteristic flavor that can restrict its acceptance by consumers. This study aimed to assess and compare the physicochemical and sensory characteristics of fat-free goat milk yogurts with added stabilizers or bovine skim milk powder to improve the final product. Four treatment additions were evaluated: (1) a mixture of 0.1% (wt/vol) carrageenan and 0.1% (wt/vol) pectin (treatment CR); (2) 0.5% (wt/vol) pectin (treatment PE); (3) 4.65% (wt/vol) bovine skim milk powder (treatment BM); and (4) control (no stabilizer; treatment CT). The physicochemical parameters were investigated at on d 1 and 5 of storage. The BM treatment presented higher pH and titratable acidity values, resulting in a buffering capacity effect. The total crude protein (CP) and solids-not-fat (SNF) contents were also higher in BM compared with the other evaluated treatments because of the addition of bovine skim milk powder. We detected a reduction in pH values for all treatments. Lower SNF contents were present in the CR and CT treatments, which might be related to a syneresis process during storage; moreover, an increase in total CP was observed for all treatments due to the proteolytic action of the starter culture. Sensory attributes, including appearance (color, consistency, and presence of lumps), texture (consistency, viscosity, and presence of lumps), flavor (bitter, sweet, and characteristic of commercial plain nonfat yogurt), and overall impression were evaluated by quantitative descriptive analysis. The addition of 0.5% (wt/vol) of pectin (PE treatment) strengthened the curd; however, the visual and oral presence of lumps and a higher bitterness score were noted by trained panelists, which resulted in the lowest overall impression score for the PE treatment. In several sensory attributes, the CR treatment was considered similar to the control; the mixture of 0.1% (wt/vol) carrageenan and 0.1% (wt/vol) pectin was not as effective as expected. Goat milk yogurt containing added bovine skim milk powder (BM) had improved consistency, viscosity, and flavor due to its higher SNF and total CP contents, which are particularly important for the desirable texture of plain nonfat yogurt. In addition, the BM yogurt was considered to have characteristics most similar to that of available commercial brands and achieved the best score for overall impression. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Some Notes on Gasoline-Engine Development

NASA Technical Reports Server (NTRS)

Ricardo, H R

1927-01-01

Experiments were carried out using a special engine with small glass windows and a stroboscope to record various aspects of engine performance. Valve position, supercharging, and torque recoil were all investigated with this experimental apparatus.

COED Transactions, Vol. XI, No. 2, February 1979. A Student Designed Microcomputer Based Data Acquisition System.

ERIC Educational Resources Information Center

Mitchell, Eugene E., Ed.

In context of an instrumentation course, four ocean engineering students set out to design and construct a micro-computer based data acquisition system that would be compatible with the University's CYBER host computer. The project included hardware design in the area of sampling, analog-to-digital conversion and timing coordination. It also…

77 FR 58970 - Special Conditions: Embraer S.A. Model EMB-550 Airplanes, Sudden Engine Stoppage

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-25

... factor. The criteria for the more-severe events would no longer be a purely static torque-load condition... combines 1g flight loads with the transient dynamic loads resulting from: (a) The loss of any fan... the adoption of the final rules. #0; #0; #0; #0;#0;Federal Register / Vol. 77, No. 186 / Tuesday...

Boiling Heat-Transfer Processes and Their Application in the Cooling of High Heat Flux Devices

DTIC Science & Technology

1993-06-01

1991, pp. 395-397. 385. Galloway, J. E. and Mudawar , 1. "Critical Heat Flux Enhancement by Means of Liquid Subcooling and Centrifugal Force Induced...Flow Boiling Heat Transfer for a Spirally Fluted Tube." Heat Tran~ler Engineering, Vol. 13, No.1, 1992, pp. 42-52. 390. Willingham, T. C. and Mudawar

SSC San Diego Biennial Review 2003. Vol 2: Communication and Information Systems

DTIC Science & Technology

2003-01-01

University, Department of Electrical and Computer Engineering) Michael Jablecki (Science and Technology Corporation) Stochastic Unified Multiple...wearable computers and cellular phones. The technology-transfer process involved a coalition of government and industrial partners, each providing...the design and fabrication of the coupler. SSC San Diego developed a computer -controlled fused fiber fabrication station to achieve the required

9. Interior, original Boiler and Engine Room, Engine Stores Building, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. Interior, original Boiler and Engine Room, Engine Stores Building, Southern Pacific Railroad Carlin Shops, view to south (90mm lens). Note the roof truss system and built-up iron longitudinal roof girders. - Southern Pacific Railroad, Carlin Shops, Engine Stores Building, Foot of Sixth Street, Carlin, Elko County, NV

Consolidation of Contingency Data and Its Use in Computer Graphics to Plan Bare Base Facility Construction at a Forward Operating Location.

DTIC Science & Technology

1983-09-01

34 o D Qa. : "lo °%S .. " ig.22. aveQuitComand P L %S dU a a Troubleshooting There are several potential problems that the user may encounter when...34 Air Force Civil Engineer, Vol. 3, No. 3 (August 1962 ), pp. 6-7. 40. Roberts, Captain Mike. "Automated Drafting and Design for the Base Civil Engineer... Eglin AFB FL, undated. 216 . - ,. ° - . .. . . .. r! 57. . Explosive Safety Standards. AFR 127-100. Chapter 5: Principles and Application of Explo- sive

Inter-noise 89 - Engineering for environmental noise control; Proceedings of the International Conference on Noise Control Engineering, Newport Beach, CA, Dec. 4-6, 1989. Vols. 1 & 2

NASA Astrophysics Data System (ADS)

Maling, George C., Jr.

Recent advances in noise analysis and control theory and technology are discussed in reviews and reports. Topics addressed include noise generation; sound-wave propagation; noise control by external treatments; vibration and shock generation, transmission, isolation, and reduction; multiple sources and paths of environmental noise; noise perception and the physiological and psychological effects of noise; instrumentation, signal processing, and analysis techniques; and noise standards and legal aspects. Diagrams, drawings, graphs, photographs, and tables of numerical data are provided.

Structured Finite Volume Modeling of U.S. Navy Aircraft Engine Test Cells Task 2: Turboprop Engine Vol 1

DTIC Science & Technology

1993-06-01

propeller was modeled using an actuator disk model, where in all of the net results of the propeller (wash, swirl, turbulence) are modeled as source...8217)DUCTI* ~ hVAILJZL TV D0*C) ME.UUT FULLY’ LEGIBLE FREPROI)UCTIM 𔃾S \\JiA~v~r (r7, CL w4 bj4 APPENDIX B COPY AVAUAEL TO e MonC DO* IOT flR=1 VULL...dynamics HVAC systems, energy loss measurement, power ARMY FlAP generation) BDG Shore Faciltes 3B Controls and electrical conservation (electrical systems

The Impact of Low Octane Hydrocarbon Blending Streams on Ethanol Engine Optimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Szybist, James P; West, Brian H

2013-01-01

Ethanol is a very attractive fuel from an end-use perspective because it has a high chemical octane number and a high latent heat of vaporization. When an engine is optimized to take advantage of these fuel properties, both efficiency and power can be increased through higher compression ratio, direct fuel injection, higher levels of boost, and a reduced need for enrichment to mitigate knock or protect the engine and aftertreatment system from overheating. The ASTM D5798 specification for high level ethanol blends, commonly called E85, underwent a major revision in 2011. The minimum ethanol content was revised downward from 68more » vol% to 51 vol%, which combined with the use of low octane blending streams such as natural gasoline introduces the possibility of a lower octane E85 fuel. While this fuel is suitable for current ethanol tolerant flex fuel vehicles, this study experimentally examines whether engines can still be aggressively optimized for the resultant fuel from the revised ASTM D5798 specification. The performance of six ethanol fuel blends, ranging from 51-85% ethanol, is compared to a premium-grade certification gasoline (UTG-96) in a single-cylinder direct-injection (DI) engine with a compression ratio of 12.9:1 at knock-prone engine conditions. UTG-96 (RON = 96.1), light straight run gasoline (RON = 63.6), and n-heptane (RON = 0) are used as the hydrocarbon blending streams for the ethanol-containing fuels in an effort to establish a broad range of knock resistance for high ethanol fuels. Results show that nearly all ethanol-containing fuels are more resistant to engine knock than UTG-96 (the only exception being the ethanol blend with 49% n-heptane). This knock resistance allows ethanol blends made with 33 and 49% light straight run gasoline, and 33% n-heptane to be operated at significantly more advanced combustion phasing for higher efficiency, as well as at higher engine loads. While experimental results show that the octane number of the hydrocarbon blend stock does impact engine performance, there remains a significant opportunity for engine optimization when considering even the lowest octane fuels that are in compliance with the current revision of ASTM D5798 compared to premium-grade gasoline.« less

Medical Surveillance Monthly Report (MSMR). Volume 15, Number 1, January 2008

DTIC Science & Technology

2008-01-01

108.8 138.3 1.26 22.34 Idaho 60 99.8 51.9 1.16 13.40 Montana 69 119.5 49.9 1.38 33.13 New Mexico 72 78.6 79.1 0.91 -7.78 Nevada 96 142.3...May 2004. Note: Completeness and timeliness of reporting vary by facility. Shigella Hepatitis B Varicella Reporting locations Number of reports all... Varicella Reporting locations Number of reports all events† Food-borne Vaccine preventable Campylo- bacter Giardia Salmonella 24 VOL. 15 / NO. 1

Visible Light Emitting Materials and Injection Devices

DTIC Science & Technology

1993-01-01

view to preventing the occurrence of faceting in these films. (II) MOCVD growth of II-VI materials (Tim Anderson) (11.1) Growth of novel Zn ZCd SSeI ...E.J. Stofko and R.J, Paff, "Synthesis and some properties of BeTe, BeSe, and BeS", J, Phys, Chem. Soiid. 33 (1972) 501. 2. R. Yamamoto, M . Inoue, K...Technology," SID Seminar Lecture Notes, 1988, Vol. 1 7. R.M. Park, M ,B. Troffer, and C.M. Rouleau, "p-type ZnSe by nitrogen atom beam doping during molecular

Individual-Ion Addressing with Microwave Field Gradients

DTIC Science & Technology

2013-04-22

Block 13: Supplementary Note © 2013 . Published in Physical Review Letters, Vol. Ed. 0 110, (17) ( 2013 ), ( (17). DoD Components reserve a royalty...2012; published 22 April 2013 ) Individual-qubit addressing is a prerequisite for many instances of quantum information processing. We demonstrate this...to B0. We configure jBMWð0; y; 0Þj ’ 0 PRL 110, 173002 ( 2013 ) P HY S I CA L R EV I EW LE T T E R S week ending 26 APRIL 2013 0031-9007=13=110(17

Preliminary Reports, Memoranda and Technical Notes of the Materials Research Council Summer Conference, La Jolla, CA

DTIC Science & Technology

1975-07-01

1298 (1974); T. Wei, S. Etemad, A. F. Garito and A. J. Heeger, Phys. Lett. 4_5a 269 (1973). G. A. Vhomas, et. al .. Solid State Comm. 0£, 000...C. Beer, Eds. (Academic Press, New York 1975) Vol. 11 (to be published). H. Fetterman et al ., IEEE Trans. MTT-22, 1013 (1974) 8. A. H. Silver...increasing temperature over extensive ranges. Such measure- ments were reported by Johnston et al .?1 for the fast ionic conductor RbAgJ,. Thermal

Wall-crossing between stable and co-stable ADHM data

NASA Astrophysics Data System (ADS)

Ohkawa, Ryo

2018-06-01

We prove formula between Nekrasov partition functions defined from stable and co-stable ADHM data for the plane following method by Nakajima and Yoshioka (Kyoto J Math 51(2):263-335, 2011) based on the theory of wall-crossing formula developed by Mochizuki (Donaldson type invariants for algebraic surfaces: transition of moduli stacks, Lecture notes in mathematics, vol 1972, Springer, Berlin, 2009). This formula is similar to conjectures by Ito et al. [J High Energy Phys 2013(5):045, 2013, (4.1), (4.2)] for A1 singularity.

Job Prospects for Nuclear Engineers.

ERIC Educational Resources Information Center

Basta, Nicholas

1985-01-01

As the debate over nuclear safety continues, the job market remains healthy for nuclear engineers. The average salary offered to new nuclear engineers with bachelor's degrees is $27,400. Salary averages and increases compare favorably with other engineering disciplines. Various job sources in the field are noted. (JN)

Utilization of waste glycerin to fuelling of spark ignition engines

NASA Astrophysics Data System (ADS)

Stelmasiak, Z.; Pietras, D.

2016-09-01

The paper discusses a possibilities of usage a simple alcohols to fuelling of spark ignition engines. Methanol and blends of methanol with glycerin, being a waste product from production of bio-components to fuels based on rapeseed oil, have been used in course of the investigations. The main objective of the research was to determine possibilities of utilization of glycerin to blending of engine fuels. The investigations have been performed using the Fiat 1100 MPI engine. Parameters obtained with the engine powered by pure methanol and by methanol- glycerin mixtures with 10÷30%vol content of glycerin were compared to parameters of the engine fuelled conventionally with the E95 gasoline. The investigations have shown increase of overall efficiency of the engine run on pure methanol with 2.5÷5.0%, and run on the mixture having 10% addition of glycerin with 2.0÷7.8%. Simultaneously, fuelling of the engine with the investigated alcohols results in reduced concentration of toxic components in exhaust gases like: CO, THC and NOx, as well as the greenhouse gas CO2.

10. Interior detail, original Boiler and Engine Room, Engine Stores ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. Interior detail, original Boiler and Engine Room, Engine Stores Building, Southern Pacific Railroad Carlin Shops, view to east (90mm lens). Note the pin-connected roof truss system and built-up iron longitudinal roof girders. - Southern Pacific Railroad, Carlin Shops, Engine Stores Building, Foot of Sixth Street, Carlin, Elko County, NV

Restructuring Graduate Engineering Education: The M.Eng. Program at Cornell.

ERIC Educational Resources Information Center

Cady, K. Bingham; And Others

1988-01-01

Discusses the restructuring of the graduate program to accommodate emerging fields in engineering. Notes half of the graduate degrees Cornell grants each year are M.Eng. degrees. Offers 12 specialties: aerospace, agriculture, chemical, civil, electrical, mechanical and nuclear engineering; computer science, engineering physics; geological…

Engine room, showing engine generator foundation and inlet louvers, looking ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Engine room, showing engine generator foundation and inlet louvers, looking southwest. Note fuel gauge on west wall, left of fuse box, and exhaust pipe through south wall. - Western Union Telegraph Company, Jennerstown Relay, Laurel Summit Road off U.S. 30, Laughlintown, Westmoreland County, PA

COED Transactions, Vol. XI, No. 3, March 1979. LSSP: An Educational Aid to the Study of Linear System Dynamics.

ERIC Educational Resources Information Center

Mitchell, Eugene E., Ed.

The study of the dynamics of physical systems is of importance to all engineering students. LSSP, a Linear System Simulation Program, is used to study the behavior of physical phenomena and systems which may be represented to a good degree of approximation by linear models. Emphasis is placed upon the unity resulting from the mathematical…

Economic Impacts of Prison Growth

DTIC Science & Technology

2010-04-13

allow collective bargaining for public sector correctional workers, proposals to alter rules for the 2010 Census count, and rural development efforts...number of rural areas have chosen to tie their economies to prisons, viewing the institutions as recession-proof development engines. Though many local...correctional authorities. 80 Beale, Calvin L., “ Rural Prisons: An Update”, Rural Development Perspectives, vol. 11, no. 2, March 2001, p. 25. http

Theoretical Analysis of Microwave Propagation.

DTIC Science & Technology

1984-04-01

effects of the turbulent atmosphere on wave propagation, US Department of Commerce, NTIS, Springfield, VA. * VanVleck, J.H. (1947), "The absorption of... turbulent atmosphere on wave propagation, US Department of Commerce, NTIS, Sprinifield, VA. -. A. Vigants (1975), "Space diversity engineering," BSTJ, Vol... Turbulence ., ...... 2-26 2.5 ATMOSPHERIC ABSORPTION. 2-26 2 .6 RAIN ATTENUATION ....... 2-29 3 TROPOSCATTER PROPAGATION .................... 3-1 3.1

Lightweight Portable Plasma Medical Device - Plasma Engineering Research Laboratory

DTIC Science & Technology

2012-10-01

cut fruit surfaces contaminated with migrating microorganisms," Journal of Food Protection, vol. 71, pp. 1619-1625, Aug 2008. [31] H. L. Chen, et...foodborne and opportunistic nosocomial pathogens is a major problem in food industry, biomedical and hospital applications, respectively. The resistive...source is very efficient in decontaminating wide range of infection and contamination causing bacteria. The direct and indirect exposure of the RBP

Rotorwash Operational Footprint Modeling

DTIC Science & Technology

2014-07-01

tests on sheet debris in the Texas Tech University wind tunnel. The goals of the research project were to 1) examine flight initiation wind speeds...derivative, requires further investigation for potential improvement based on post 1994 flight test data. It also requires further development for 360...Impact Testing ,” Journal of Structural Engineering, ASCE, Vol. 133, February 2007, pp. 274-282. 27. Marsh, K. R., " Research on VTOL Water Hover

Wireless Communications in Reverberant Environments

DTIC Science & Technology

2015-01-01

Secure Wireless Agent Testbed (SWAT), the Protocol Engineering Advanced Networking (PROTEAN) Research Group, the Data Fusion Laboratory (DFL), and the...constraints of their application. 81 Bibliography [1] V. Gungor and G. Hancke, “Industrial wireless sensor networks : Challenges, design principles, and...Bhattacharya, “Path loss estimation for a wireless sensor network for application in ship,” Int. J. of Comput. Sci. and Mobile Computing, vol. 2, no. 6, pp

High-Octane Mid-Level Ethanol Blend Market Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Caley; Newes, Emily; Brooker, Aaron

2015-12-01

The United States government has been promoting increased use of biofuels, including ethanol from non-food feedstocks, through policies contained in the Energy Independence and Security Act of 2007. The objective is to enhance energy security, reduce greenhouse gas (GHG) emissions, and provide economic benefits. However, the United States has reached the ethanol blend wall, where more ethanol is produced domestically than can be blended into standard gasoline. Nearly all ethanol is blended at 10 volume percent (vol%) in gasoline. At the same time, the introduction of more stringent standards for fuel economy and GHG tailpipe emissions is driving research tomore » increase the efficiency of spark ignition (SI) engines. Advanced strategies for increasing SI engine efficiency are enabled by higher octane number (more highly knock-resistant) fuels. Ethanol has a research octane number (RON) of 109, compared to typical U.S. regular gasoline at 91-93. Accordingly, high RON ethanol blends containing 20 vol% to 40 vol% ethanol are being extensively studied as fuels that enable design of more efficient engines. These blends are referred to as high-octane fuel (HOF) in this report. HOF could enable dramatic growth in the U.S. ethanol industry, with consequent energy security and GHG emission benefits, while also supporting introduction of more efficient vehicles. HOF could provide the additional ethanol demand necessary for more widespread deployment of cellulosic ethanol. However, the potential of HOF can be realized only if it is adopted by the motor fuel marketplace. This study assesses the feasibility, economics, and logistics of this adoption by the four required participants--drivers, vehicle manufacturers, fuel retailers, and fuel producers. It first assesses the benefits that could motivate these participants to adopt HOF. Then it focuses on the drawbacks and barriers that these participants could face when adopting HOF and proposes strategies--including incentives and policies--to curtail these barriers. These curtailment strategies are grouped into scenarios that are then modeled to investigate their feasibility and explore the dynamics involved in HOF deployment. This report does not advocate for or against incentives or policies, but presents simulations of their effects.« less

Kepler Archive Manual

NASA Technical Reports Server (NTRS)

Thompson, Susan E.; Fraquelli, Dorothy; Van Cleve, Jeffrey E.; Caldwell, Douglas A.

2016-01-01

A description of Kepler, its design, performance and operational constraints may be found in the Kepler Instrument Handbook (KIH, Van Cleve Caldwell 2016). A description of Kepler calibration and data processing is described in the Kepler Data Processing Handbook (KDPH, Jenkins et al. 2016; Fanelli et al. 2011). Science users should also consult the special ApJ Letters devoted to early Kepler results and mission design (April 2010, ApJL, Vol. 713 L79-L207). Additional technical details regarding the data processing and data qualities can be found in the Kepler Data Characteristics Handbook (KDCH, Christiansen et al. 2013) and the Data Release Notes (DRN). This archive manual specifically documents the file formats, as they exist for the last data release of Kepler, Data Release 25(KSCI-19065-002). The earlier versions of the archive manual and data release notes act as documentation for the earlier versions of the data files.

ETR HEAT EXCHANGER BUILDING, TRA644. SOUTH SIDE. CAMERA FACING NORTH. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ETR HEAT EXCHANGER BUILDING, TRA-644. SOUTH SIDE. CAMERA FACING NORTH. NOTE POURED CONCRETE WALLS. ETR IS AT LEFT OF VIEW. NOTE DRIVEWAY INSET AT RIGHT FORMED BY DEMINERALIZER WING AT RIGHT. SOUTHEAST CORNER OF ETR, TRA-642, IN VIEW AT UPPER LEFT. INL NEGATIVE NO. HD46-36-1. Mike Crane, Photographer, 4/2005 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

40 CFR 1042.1 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-07-01

... of “compression-ignition” in § 1042.901. (2) Marine gas turbine engines. (3) Other marine internal... engines powered by natural gas or other gaseous fuels with maximum engine power at or above 250 kW. Note... EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Overview and Applicability...

40 CFR 1042.1 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-07-01

... of “compression-ignition” in § 1042.901. (2) Marine gas turbine engines. (3) Other marine internal... engines powered by natural gas or other gaseous fuels with maximum engine power at or above 250 kW. Note... EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Overview and Applicability...

40 CFR 1042.1 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... of “compression-ignition” in § 1042.901. (2) Marine gas turbine engines. (3) Other marine internal... engines powered by natural gas or other gaseous fuels with maximum engine power at or above 250 kW. Note... EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Overview and Applicability...

40 CFR 1042.1 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... of “compression-ignition” in § 1042.901. (2) Marine gas turbine engines. (3) Other marine internal... engines powered by natural gas or other gaseous fuels with maximum engine power at or above 250 kW. Note... EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Overview and Applicability...

40 CFR 1042.1 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-07-01

... of “compression-ignition” in § 1042.901. (2) Marine gas turbine engines. (3) Other marine internal... engines powered by natural gas or other gaseous fuels with maximum engine power at or above 250 kW. Note... EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Overview and Applicability...

40 CFR 86.1332-90 - Engine mapping procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations for New Otto-Cycle and Diesel Heavy-Duty Engines; Gaseous and Particulate Exhaust Test Procedures... maximum mapping speed per the following methodologies. (Note paragraph (d)(1) below.) (1) Otto-cycle engines. (i) For ungoverned engines using the transient operating cycle set forth in paragraph (f)(1) of...

The Use of Enhanced Guided Notes in an Electric Circuit Class: An Exploratory Study

ERIC Educational Resources Information Center

Lawanto, O.

2012-01-01

This study was conducted to evaluate students' (n=70) learning performance after their participation in lectures using enhanced guided notes (EGN) in an electric circuits course for non-electrical engineering students. Unlike traditional guided notes, EGN include questions that prompt students to evaluate their metacognitive knowledge. The results…

FAST CHOPPER BUILDING, TRA665. CAMERA FACING NORTH. NOTE BRICKEDIN WINDOW ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

FAST CHOPPER BUILDING, TRA-665. CAMERA FACING NORTH. NOTE BRICKED-IN WINDOW ON RIGHT SIDE (BELOW PAINTED NUMERALS "665"). SLIDING METAL DOOR ON COVERED RAIL AT UPPER LEVEL. SHELTERED ENTRANCE TO STEEL SHIELDING DOOR. DOOR INTO MTR SERVICE BUILDING, TRA-635, STANDS OPEN. MTR BEHIND CHOPPER BUILDING. INL NEGATIVE NO. HD42-1. Mike Crane, Photographer, 3/2004 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Interpretation of f({epsilon}) measurements by T. Kimura, K. Akatsuka and K. Ohe

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garcia, M.

1996-11-26

This note describes my analysis of the measurement of the electron energy distribution function in a DC glow discharge reported by T. Kimura, K. Akatsuka, and K. Ohe, in `Experimental and theoretical investigations of DC glow discharges in argon-nitrogen mixtures,`J. Phys. D: Appl. Phys. 27 (1994) 1664-1671. T. Kimura of the Department of Systems Engineering at the Nagoya Institute of Technology sent me this paper in 1994, as well as `Electron Energy Distribution Function in Neon-Nitrogen Mixture Positive Column,` T. Kimura, and K. Ohe, Jpn. J. Appl. Phys. Vol. 3 1, Part 1, No. 12A, December 1992, pp. 4051- 4052.more » I base my analysis on the data for a pure N{sub 2} discharge at p=1 torr in the 1994 paper. Figures 2 and 3 in that paper show a discrepancy between f({epsilon}) as measured by Langmuir probing and f({epsilon}) as calculated from E/N based on the measured axial field. Kimura et. al. explain their observation of hotter than expected electrons on superelastic collisions with vibrationally excited nitrogen. My fundamental point is that the radial field generated by ambipolar diffusion significantly augments E/N above the contribution from the axial field in this experiment, and creates a higher than expected radially averaged electron energy.« less

Numerical simulation of systems of shear bands in ductile metal with inclusions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Plohr, JeeYeon N., E-mail: jplohr@lanl.gov; Plohr, Bradley J.

2016-02-15

We develop a method for numerical simulations of high strain-rate loading of mesoscale samples of ductile metal with inclusions. Because of its small-scale inhomogeneity, the composite material is prone to localized shear deformation (adiabatic shear bands). This method employs the Generalized Method of Cells of Paley and Aboudi [Mech. Materials, vol. 14, pp. 127–139, 1992] to ensure that the micro mechanical behavior of the metal and inclusions is reflected properly in the behavior of the composite at the mesoscale. To find the effective plastic strain rate when shear bands are present, we extend and apply the analytic and numerical analysismore » of shear bands of Glimm, Plohr, and Sharp [Mech. Materials, vol. 24, pp. 31–41, 1996]. Our tests of the method focus on the stress/strain response in uniaxial-strain flow, both compressive and tensile, of depleted uranium metal containing silicon carbide inclusions. We use the Preston-Tonks-Wallace viscoplasticity model [J. Appl. Phys., vol. 93, pp. 211–220, 2003], which applies to the high strain-rate regime of an isotropic viscoplastic solid. In results, we verify the elevated temperature and thermal softening at shear bands in our simulations of pure DU and DU/SiC composites. We also note that in composites, due the asymmetry caused by the inclusions, shear band form at different times in different subcells. In particular, in the subcells near inclusions, shear band form much earlier than they do in pure DU.« less

Numerical simulation of systems of shear bands in ductile metal with inclusions

NASA Astrophysics Data System (ADS)

Plohr, JeeYeon N.; Plohr, Bradley J.

2016-02-01

We develop a method for numerical simulations of high strain-rate loading of mesoscale samples of ductile metal with inclusions. Because of its small-scale inhomogeneity, the composite material is prone to localized shear deformation (adiabatic shear bands). This method employs the Generalized Method of Cells of Paley and Aboudi [Mech. Materials, vol. 14, pp. 127-139, 1992] to ensure that the micro mechanical behavior of the metal and inclusions is reflected properly in the behavior of the composite at the mesoscale. To find the effective plastic strain rate when shear bands are present, we extend and apply the analytic and numerical analysis of shear bands of Glimm, Plohr, and Sharp [Mech. Materials, vol. 24, pp. 31-41, 1996]. Our tests of the method focus on the stress/strain response in uniaxial-strain flow, both compressive and tensile, of depleted uranium metal containing silicon carbide inclusions. We use the Preston-Tonks-Wallace viscoplasticity model [J. Appl. Phys., vol. 93, pp. 211-220, 2003], which applies to the high strain-rate regime of an isotropic viscoplastic solid. In results, we verify the elevated temperature and thermal softening at shear bands in our simulations of pure DU and DU/SiC composites. We also note that in composites, due the asymmetry caused by the inclusions, shear band form at different times in different subcells. In particular, in the subcells near inclusions, shear band form much earlier than they do in pure DU.

78 FR 50320 - Airworthiness Directives; General Electric Company Turbofan Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-19

... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... Electric Company (GE) model GEnx-2B67B turbofan engines with booster anti-ice (BAI) air duct, part number...-2B67 turbofan engine be removed from the Applicability section of this AD. The commenters noted that...

Compartment C1, engine room. View down compionway of top of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Compartment C-1, engine room. View down compionway of top of engine cylinder heads; note slots in frame at left of photograph, slots hold steel bars which form a protective grating above the engines during battle. (081) - USS Olympia, Penn's Landing, 211 South Columbus Boulevard, Philadelphia, Philadelphia County, PA

Concrete pavement construction basics : tech notes.

DOT National Transportation Integrated Search

2006-08-01

This tech note has been produced for developers, consultants, and engineers planning concrete pavement construction projects, superintendents and supervisors who want a basic training aid and reference, and crew members new to the concrete paving ind...

COED Transactions, Vol. X, No. 7 & 8, July/August 1978. Bridging Theory and Reality: Analog Simulation as an Aid to Heuristic Understanding.

ERIC Educational Resources Information Center

Marcovitz, Alan B., Ed.

A particularly difficult area for many engineering students is the approximate nature of the relation between models and physical systems. This is notably true when the models consist of differential equations. An approach applied to this problem has been to use analog computers to assist in portraying the output of a model as it is progressively…

Southern California Coastal Processes Annotated Bibliography.

DTIC Science & Technology

1985-12-01

05/01/71 TITLE : Avalon Transportation Wharf CITATION : Journal of Waterways, Harbors and Coastal Engineering Division, ASCE, N. Y., Vol. 97, No. WW2 ...105, No. WW2 ; ASCE, N. Y., pp. 131-147 DESCRIPTION s Effect of various offshore structures as significant barriers to normal wave progress...California, 33 pp. DESCRIPTION Infrared satellite images are shown for each of two areas near +- the California coast, Cape Mendocino and Point

An Exploratory Analysis of the Relationship between Media Richness and Managerial Information Processing

DTIC Science & Technology

1984-07-01

engineers use technology to design optimal information systems that will provide clear, correct data to help managers solve current problems (Keen...is in a changing environment (Hedberg and Jonsson, 1978; Mowshowitz, 1976; Hedberg, 1981; Hedberg, Nystrom, and Starbuck , 1976). Technology based...organizations learn and unlearn." In P. C. Nystrom, and W. H. Starbuck (eds.), Handbook of Organizational Design, Vol. 1. Amsterdam: Elsevier Scientific

Erratum: Erratum to: A Novel Approach to Determination of Threshold for Stress Corrosion Cracking (KISCC) using Round Tensile Specimens

NASA Astrophysics Data System (ADS)

Singh Raman, R. K.; Rihan, R.; Ibrahim, R. N.

2017-11-01

Due to an error by the authors, the reference R. Rihan, R.K. Singh Raman, and R.N. Ibrahim: Materials Science and Engineering A, 2006, vol. 425, pp. 272-77 should have been included in the list of references as well as cited as a source of the data in Figures 11, 12 and 16.

Enhanced Lesion Visualization in Image-Guided Noninvasive Surgery With Ultrasound Phased Arrays

DTIC Science & Technology

2001-10-25

81, 1995. [4] N. Sanghvi et al., “Noninvasive surgery of prostate tissue by high-intensity focused ultrasound ,” IEEE Trans. UFFC, vol. 43, no. 6, pp...ENHANCED LESION VISUALIZATION IN IMAGE-GUIDED NONINVASIVE SURGERY WITH ULTRASOUND PHASED ARRAYS Hui Yao, Pornchai Phukpattaranont and Emad S. Ebbini...Department of Electrical and Computer Engineering University of Minnesota Minneapolis, MN 55455 Abstract- We describe dual-mode ultrasound phased

Defense AT and L Magazine. Vol. 46, no. 5, September-October 2017

DTIC Science & Technology

2017-09-01

service , and current DoD employees. College Students: Industry is offering internships as early as the sophomore year. DoD branding needs to...engineering neglect of known good practice that can result in persistent public, user, customer , staff, reputation or financial cost. In truth...DoD’s Acquisition Defense AT&L: September-October 2017 20 Workforce professionals and leaders unmistakably need to obtain more goods and services

Comparison of Hall Thruster Plume Expansion Model with Experimental Data

DTIC Science & Technology

2006-05-23

focus of this study, is a hybrid particle- in-cell ( PIC ) model that tracks particles along an unstructured tetrahedral mesh. * Research Engineer...measurements of the ion current density profile, ion energy distributions, and ion species fraction distributions using a nude Faraday probe, retarding...Vol.37 No.1. 6 Oh, D. and Hastings, D., “Three Dimensional PIC -DSMC Simulations of Hall Thruster Plumes and Analysis for Realistic Spacecraft

Unsteady Force Calculations in Turbomachinery

DTIC Science & Technology

1991-07-01

Engineering for Gas Turbines and Power, Vol. 107, pp. 945-952, October 1985. Lefcort, M. P., "An Investigation into Unsteady Blade Forces in...generated unsteady flow around a rotating turbine blade row .. ..... 43 7 The rotating coordinate system with skew, 0, and rake, zr, defined at midchord...while Kerrebrock and Mikolajczak [19701 5 proved it experimentally. For a turbine blade passage, the wake fluid moves from the pressure 3 surface to the

Space Vehicle Flight Mechanics (La Mecanique du Vol des Vehicules Spatiaux)

DTIC Science & Technology

1990-06-01

uncertainties to a reasonably or a single-stage-to-orbit vehicle manageable level". Some of the (without supersonic combustion) chiof anxieties were as...their landing on the moon or to manning space stations orbiting Earth, there exists an enormous infrastructure of scientists, engineers, managers and...politicians who together allow these ventures to come to fruition. This paper addresses the evolution of space flight, the technical and management

Heat transfer and pressure drop characteristics of a plate heat exchanger using water based Al2O3 nanofluid for 30° and 60° chevron angles

NASA Astrophysics Data System (ADS)

Elias, M. M.; Saidur, R.; Ben-Mansour, R.; Hepbasli, A.; Rahim, N. A.; Jesbains, K.

2018-04-01

Nanofluid is a new class of engineering fluid that has good heat transfer characteristics which is essential to increase the heat transfer performance in various engineering applications such as heat exchangers and cooling of electronics. In this study, experiments were conducted to compare the heat transfer performance and pressure drop characteristics in a plate heat exchanger (PHE) for 30° and 60° chevron angles using water based Al2O3 nanofluid at the concentrations from 0 to 0.5 vol.% for different Reynolds numbers. The thermo-physical properties has been determined and presented in this paper. At 0.5 vol% concentration, the maximum heat transfer coefficient, the overall heat transfer coefficient and the heat transfer rate for 60° chevron angle have attained a higher percentage of 15.14%, 7.8% and 15.4%, respectively in comparison with the base fluid. Consequently, when the volume concentration or Reynolds number increases, the heat transfer coefficient and the overall heat transfer coefficient as well as the heat transfer rate of the PHE (Plate Heat Exchangers) increases respectively. Similarly, the pressure drop increases with the volume concentration. 60° chevron angle showed better performance in comparison with 30° chevron angle.

Generalized Kubo formulas for the transport properties of incommensurate 2D atomic heterostructures

NASA Astrophysics Data System (ADS)

Cancès, Eric; Cazeaux, Paul; Luskin, Mitchell

2017-06-01

We give an exact formulation for the transport coefficients of incommensurate two-dimensional atomic multilayer systems in the tight-binding approximation. This formulation is based upon the C* algebra framework introduced by Bellissard and collaborators [Coherent and Dissipative Transport in Aperiodic Solids, Lecture Notes in Physics (Springer, 2003), Vol. 597, pp. 413-486 and J. Math. Phys. 35(10), 5373-5451 (1994)] to study aperiodic solids (disordered crystals, quasicrystals, and amorphous materials), notably in the presence of magnetic fields (quantum Hall effect). We also present numerical approximations and test our methods on a one-dimensional incommensurate bilayer system.

On ``Overestimation-free Computational Version of Interval Analysis''

NASA Astrophysics Data System (ADS)

Popova, Evgenija D.

2013-10-01

The transformation of interval parameters into trigonometric functions, proposed in Int. J. Comput. Meth. Eng. Sci. Mech., vol. 13, pp. 319-328 (2012), is not motivated in comparison to the infinitely many equivalent algebraic transformations. The conclusions about the efficacy of the methodology used are based on incorrect comparisons between solutions of different problems. We show theoretically, and in the examples considered in the commented article, that changing the number of the parameters in a system of linear algebraic equations may change the initial problem, respectively, its solution set. We also correct various misunderstandings and bugs that appear in the article noted above.

Pairing Heterocyclic Cations with closo-dodecafluorododecaborate (2-) Synthesis of Binary Heterocyclium (1+) Salts and a Ag4(heterocycle)8(4+) Salt of B12F12(2-)

DTIC Science & Technology

2011-01-01

10989). 13. SUPPLEMENTARY NOTES Journal article published in the Journal of Fluorine Chemistry, Vol. 132, Nov 2011. PA Case Number: 10989...TELEPHONE NUMBER (include area code) N/A Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. 239.18 Journal of Fluorine Chemistry 132 (2011... Fluorine Chemistry jo ur n al h o mep ag e: www .e lsev ier . c om / loc ate / f luo r1. Introduction Eight new binary salts that pair the icosahedral

Changes in particle transport as a result of resonant magnetic perturbations in DIII-D (vol 19, 056503, 2012)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mordijck, S.; Doyle, E. J.; McKee, G. R.

2012-01-01

Publisher s Note: Changes in particle transport as a result of resonant magnetic perturbations in DIII-D [Phys. Plasmas 19, 056503 (2012)]a) In the Invited Papers from the 53rd Annual Meeting of the APS Division of Plasma Physics of the May 2012 issue of the journal, this article was originally published online and in print in the incorrect section; it was published within Ionospheric, Solar-System and Astrophysical Plasmas (Sec. 65) instead of Magnetically Confined Plasmas, Heating, Confinement (Sec. 61). AIP apologizes for this error. a)

Systems Engineering Processes Applied to Ground Vehicle Integration at US Army Tank Automotive Research, Development, and Engineering Center (TARDEC)

DTIC Science & Technology

2010-08-19

UNCLASSIFIED Systems Engineering Processes Applied To Ground Vehicle Integration at US Army Tank Automotive Research, Development, and Engineering...DATES COVERED - 4. TITLE AND SUBTITLE Systems Engineering Processes Applied To Ground Vehicle Integration at US Army Tank Automotive Research...release, distribution unlimited 13. SUPPLEMENTARY NOTES Presented at NDIAs Ground Vehicle Systems Engineering and Technology Symposium (GVSETS), 17 22

MC3T3-E1 osteoblast attachment and proliferation on porous hydroxyapatite scaffolds fabricated with nanophase powder

PubMed Central

Smith, Ian O; McCabe, Laura R; Baumann, Melissa J

2006-01-01

Porous bone tissue engineering scaffolds were fabricated using both nano hydroxyapatite (nano HA) powder (20 nm average particle size) and micro HA powder (10 μm average particle size), resulting in sintered scaffolds of 59 vol% porosity and 8.6±1.9 μm average grain size and 72 vol% porosity and 588±55 nm average grain size, respectively. Scanning electron microscopy was used to measure both the grain size and pore size. MC3T3-E1 osteoblast (OB) attachment and proliferation on both nano HA and micro HA porous scaffolds were quantified. As expected, OB cell number was greater on nano HA scaffolds compared with similarly processed micro HA scaffolds 5 days after seeding, while OB attachment did not appear greater on the nano HA scaffolds (p<0.05). PMID:17722535

The Human Side of Information's Converging Technology.

ERIC Educational Resources Information Center

Williams, Berney

1982-01-01

Discusses current issues in the design of information systems, noting contributions from three professions--computer science, human factors engineering, and information science. The eclectic nature of human factors engineering and the difficulty of drawing together studies with human engineering or software psychological components from diverse…

Job Prospects for Computer Engineers.

ERIC Educational Resources Information Center

Basta, Nicholas

1988-01-01

Discusses the computer engineering industry in the United States. Recounts recent shifts in the computer industry and notes that despite foreign competition, the industry offers graduating computer engineers ample opportunities for employment. Claims that skill and technical knowledge are the most important assets for getting a job. (TW)

16. VIEW OF FIRST FLOOR EAST OPERATING GALLERY. NOTE THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

16. VIEW OF FIRST FLOOR EAST OPERATING GALLERY. NOTE THE SERIES OF MANIPULATOR ARMS ALONG THE LEFT WALL. - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV

Bibliography of Books and Published Reports on Gas Turbines, Jet Propulsion, and Rocket Power Plants, January 1950 through December 1953

DTIC Science & Technology

1953-12-01

Vt. J. V. Casamassa, Jet aircraft power systems . McGraw-Hill, New York. C. C. Chapel, Jet aircraft simplified. Aero Pubs. Inc., Los Angeles. V. C...combination. NACA Tech. Note No. 1951 (Sept.). A. F. Lietzke and H. M. Henneberry, Evaluation of piston-type gas- generator engine for subsonic transport...Dynamics of a turbojet engine considered as a quasi-static system . NACA Tech. Note No. 2091 (May). A. E. Puckett, Optimum performance of rocket- powered

CrossTalk: The Journal of Defense Software Engineering. Volume 18, Number 2

DTIC Science & Technology

2005-02-01

Richard J. Adams , Sergio Alvarado, Suellen Eslinger, and Joanne Tagami all with The Aerospace Corporation, and Scott A. Whitmire at ODS Software...Kiczales, G., and M. Kersten . “Show Me the Structure.” Software Develop- ment Apr. 2000. Notes 1. Please note that the M1-M11 number- ing of concepts did...VA: Integrated Computer Engineering, Inc., 2 Aug. 2000 (http://www.spmn.com). 3 Adams , Richard J., Suellen Eslinger, Karen L. Owens, and Mary A. Rich

Image restoration for civil engineering structure monitoring using imaging system embedded on UAV

NASA Astrophysics Data System (ADS)

Vozel, Benoit; Dumoulin, Jean; Chehdi, Kacem

2013-04-01

Nowadays, civil engineering structures are periodically surveyed by qualified technicians (i.e. alpinist) operating visual inspection using heavy mechanical pods. This method is far to be safe, not only for civil engineering structures monitoring staff, but also for users. Due to the unceasing traffic increase, making diversions or closing lanes on bridge becomes more and more difficult. New inspection methods have to be found. One of the most promising technique is to develop inspection method using images acquired by a dedicated monitoring system operating around the civil engineering structures, without disturbing the traffic. In that context, the use of images acquired with an UAV, which fly around the structures is of particular interest. The UAV can be equipped with different vision system (digital camera, infrared sensor, video, etc.). Nonetheless, detection of small distresses on images (like cracks of 1 mm or less) depends on image quality, which is sensitive to internal parameters of the UAV (vibration modes, video exposure times, etc.) and to external parameters (turbulence, bad illumination of the scene, etc.). Though progresses were made at UAV level and at sensor level (i.e. optics), image deterioration is still an open problem. These deteriorations are mainly represented by motion blur that can be coupled with out-of-focus blur and observation noise on acquired images. In practice, deteriorations are unknown if no a priori information is available or dedicated additional instrumentation is set-up at UAV level. Image restoration processing is therefore required. This is a difficult problem [1-3] which has been intensively studied over last decades [4-12]. Image restoration can be addressed by following a blind approach or a myopic one. In both cases, it includes two processing steps that can be implemented in sequential or alternate mode. The first step carries out the identification of the blur impulse response and the second one makes use of this estimated blur kernel for performing the deconvolution of the acquired image. In the present work, different regularization methods, mainly based on the pseudo norm aforementioned Total Variation, are studied and analysed. The key point of their respective implementation, their properties and limits are investigated in this particular applicative context. References [1] J. Hadamard. Lectures on Cauchy's problem in linear partial differential equations. Yale University Press, 1923. [2] A. N. Tihonov. On the resolution of incorrectly posed problems and regularisation method (in Russian). Doklady A. N.SSSR, 151(3), 1963. [3] C. R. Vogel. Computational Methods for inverse problems, SIAM, 2002. [4] A. K. Katsaggelos, J. Biemond, R.W. Schafer, and R. M. Mersereau, "A regularized iterative image restoration algorithm," IEEE Transactions on Signal Processing, vol.39, no. 4, pp. 914-929, 1991. [5] J. Biemond, R. L. Lagendijk, and R. M. Mersereau, "Iterative methods for image deblurring," Proceedings of the IEEE, vol. 78, no. 5, pp. 856-883, 1990. [6] D. Kundur and D. Hatzinakos, "Blind image deconvolution," IEEE Signal Processing Magazine, vol. 13, no. 3, pp. 43-64, 1996. [7] Y. L. You and M. Kaveh, "A regularization approach to joint blur identification and image restoration," IEEE Transactions on Image Processing, vol. 5, no. 3, pp. 416-428, 1996. [8] T. F. Chan and C. K. Wong, "Total variation blind deconvolution," IEEE Transactions on Image Processing, vol. 7, no. 3, pp. 370-375, 1998. [9] S. Chardon, B. Vozel, and K. Chehdi. Parametric Blur Estimation Using the GCV Criterion and a Smoothness Constraint on the Image. Multidimensional Systems and Signal Processing Journal, Kluwer Ed., 10:395-414, 1999 [10] B. Vozel, K. Chehdi, and J. Dumoulin. Myopic image restoration for civil structures inspection using UAV (in French). In GRETSI, 2005. [11] L. Bar, N. Sochen, and N. Kiryati. Semi-blind image restoration via Mumford-Shah regularization. IEEE Transactions on Image Processing, 15(2), 2006. [12] J. H. Money and S. H. Kang, "Total variation minimizing blind deconvolution with shock filter reference," Image and Vision Computing, vol. 26, no. 2, pp. 302-314, 2008.

14. INTERIOR OF ENGINE ROOM, CONTAINING MESTACORLISS CROSSCOMPOUND ENGINE, FOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. INTERIOR OF ENGINE ROOM, CONTAINING MESTA-CORLISS CROSS-COMPOUND ENGINE, FOR 40" BLOOMING MILL. THIS VIEW HIGHLIGHTS THE CRANK AND 24' DIAMETER FLYWHEEL. THE ENGINE IS A 7,940 HP MESTA-CORLISS CROSS-COMPOUND STEAM ENGINE ITS BORE AND STROKE ARE 32"X84"X60". NOTE FLY BALL GOVERNOR ON ENGINE. MILL DRIVE SHAFT ATTACHED TO PULLEY ON LOCATED ON CRANK. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

NLC Newsletter

Science.gov Websites

November 2003 Vol. 4 No. 10 - 11 September 2003 Vol. 4 No. 9 August 2003 Vol.4 No. 8 July 2003 Vol.4 No. 7 Vol. 3 No. 9 August 2002 Vol. 3 No. 8 July 2002 Vol. 3 No. 7 June 2002 Vol. 3 No. 6 May 2002 Vol. 3 No . 2 No.10 August 2001 Vol. 2 No. 4 March 2001 Vol. 2 No. 3 February 2001 Vol. 2 No. 2 January 2001 Vol

17. Interior oblique view, original Cooper's Shop, Engine Stores Building, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. Interior oblique view, original Cooper's Shop, Engine Stores Building, Southern Pacific Railroad Carlin Shops, view to southeast (90mm lens). Note the original window and sealed doorway. - Southern Pacific Railroad, Carlin Shops, Engine Stores Building, Foot of Sixth Street, Carlin, Elko County, NV

Closeup view of the aft fuselage of the Orbiter Discovery ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Close-up view of the aft fuselage of the Orbiter Discovery looking at the thrust structure that supports the Space Shuttle Main Engines (SSMEs). In this view, SSME number two position is on the left and SSME number three position is on the right. The thrust structure transfers the forces produce by the engines into and through the airframe of the orbiter. The thrust structure includes the SSMEs load reaction truss structure, engine interface fittings and the hydraulic-actuator support structure. The propellant feed lines are the plugged and capped orifices within the engine bays. Note that SSME position two is rotated ninety degrees from position three and one. This was needed to enable enough clearance for the engines to fit and gimbal. Note in engine bay three is a clear view of the actuators that control the gambling of that engine. This view was taken from a service platform in the Orbiter Processing Facility at Kennedy Space Center. - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

Developing Elementary Math and Science Process Skills Through Engineering Design Instruction

NASA Astrophysics Data System (ADS)

Strong, Matthew G.

This paper examines how elementary students can develop math and science process skills through an engineering design approach to instruction. The performance and development of individual process skills overall and by gender were also examined. The study, preceded by a pilot, took place in a grade four extracurricular engineering design program in a public, suburban school district. Students worked in pairs and small groups to design and construct airplane models from styrofoam, paper clips, and toothpicks. The development and performance of process skills were assessed through a student survey of learning gains, an engineering design packet rubric (student work), observation field notes, and focus group notes. The results indicate that students can significantly develop process skills, that female students may develop process skills through engineering design better than male students, and that engineering design is most helpful for developing the measuring, suggesting improvements, and observing process skills. The study suggests that a more regular engineering design program or curriculum could be beneficial for students' math and science abilities both in this school and for the elementary field as a whole.

An Analysis of the Multiple Objective Capital Budgeting Problem via Fuzzy Linear Integer (0-1) Programming.

DTIC Science & Technology

1980-05-31

34 International Journal of Man- Machine Studies , Vol. 9, No. 1, 1977, pp. 1-68. [16] Zimmermann, H. J., Theory and Applications of Fuzzy Sets, Institut...Boston, Inc., Hingham, MA, 1978. [18] Yager, R. R., "Multiple Objective Decision-Making Using Fuzzy Sets," International Journal of Man- Machine Studies ...Professor of Industria Engineering ... iv t TABLE OF CONTENTS page ABSTRACT .. .. . ...... . .... ...... ........ iii LIST OF TABLES

CrossTalk. The Journal of Defense Software Engineering. Volume 13, Number 6, June 2000

DTIC Science & Technology

2000-06-01

Techniques for Efficiently Generating and Testing Software This paper presents a proven process that uses advanced tools to design, develop and test... optimal software. by Keith R. Wegner Large Software Systems—Back to Basics Development methods that work on small problems seem to not scale well to...Ability Requirements for Teamwork: Implications for Human Resource Management, Journal of Management, Vol. 20, No. 2, 1994. 11. Ferguson, Pat, Watts S

Aircraft Simulator: Multiple-Cockpit Combat Mission Trainer Network.

DTIC Science & Technology

1984-01-01

Force Human Resources Laboratory (AFHRL), the Air Force Office of Scientific Research (AFOSR), and the Southeastern Center for Electrical Engineering...New York: IEEE Press. Rapumno, R. A. , A Shimsaki, N. (1974). Synchronization of earth stations to satellite-switched sequences. Comunications ...Satellite Technology, 33 (Progress in Astronautics and Aeronautics) , 411-429. Tobagi, F. A. (1980). Multiaccess protocols in packet comunication systems. IEEE TMS. C". , 4 (vol. CO-28), 468-488. 27 ORR .0--000

Characterization of Strain-Induced Anisotropy in Titanium at Large Strains under Monotonic and Bauschinger Loading

DTIC Science & Technology

2010-07-15

1966), Texture Strenthening, Metals Engineering Quaterly –American Society Vol 6 , No 4 . W. Terry (2008), TEM investigation of Titanium based sheet...Report 3. DATES COVERED (From – To) 1 November 2007 - 01-Nov-08 4 . TITLE AND SUBTITLE Characterization of strain-induced anisotropy in Titanium at...CNRS - CONFIDENTIAL - Privileged Information - EOARD & CNRS’s proprietary information" 6 Introduction Titanium based materials deform by twinning

SIMOGEN - An Object-Oriented Language for Simulation

DTIC Science & Technology

1989-03-01

program generator must also be written in the same prcgramming languaje . In this case, the C language was chosen, for the following main reasons...3), March 88. 4. PRESTO: A System for Object-Oriented Parallel Programing B N Bershad, E D Lazowska & H M Levy Software Practice and Experience, Vol...U.S. Depare nt of Defence ANSI/ML-STD 1815A. 7. Object-oriented Development Grady Booch Transactions on Software Engineering , February 86. 8. A

ACOSS Eleven (Active Control of Space Structures). Volume 1.

DTIC Science & Technology

1983-07-01

Dr. Keto Soosaar (617) 258-2575 Project Engineer: Richard Carman (315) 330-3148 Approved for public release; distribution unlimited This research was...the Department of Defense and monitored by the Rome Air Development Center. The program manager is Dr. Keto Soosaar and the project leader for...Scharf, "Covariant Invariant Digital Filters," IEEE Trans. Acoust., Speech, Signal Proc., Vol. ASSP-25, No. 2, April 1977, pp. 143 -151. 55 h

Apollo Operations Handbook Lunar Module (LM 11 and Subsequent) Vol. 2 Operational Procedures

NASA Technical Reports Server (NTRS)

1971-01-01

The Apollo Operations Handbook (AOH) is the primary means of documenting LM descriptions and procedures. The AOH is published in two separately bound volumes. This information is useful in support of program management, engineering, test, flight simulation, and real time flight support efforts. This volume contains crew operational procedures: normal, backup, abort, malfunction, and emergency. These procedures define the sequence of actions necessary for safe and efficient subsystem operation.

Rocket Radiation Handbook. Volume I. Rocket Radiation Phenomenology and Theory

DTIC Science & Technology

1974-06-01

490 definitionujof D padd to end of definition "i defined *by BQ. (C.40) .v- bottom of page add "D = Diameter uued in view-factor * ~calculitions...investigator In the program which was carried out under the general technical direction of Mr. H. Lopez, Director of Engineering. DISTRIBUTION The...14 Vol. I ABSTRACT A review Is given of various mechan;kms responsible for the generation of Infrared, visible, and ultraviolet radiation from

Managing Security in FPGA-Based Embedded Systems

DTIC Science & Technology

2008-01-01

Trans. De- sign Automation of Electronic Systems (TODAES), vol. 13, no. 3, July 2008, article 44. c©2008 ACM with permission.5) of the function would need...in the finished design. In addition, the life cycle can be subverted when engineers inject unintended functionality, some of which might be malicious...cores and a moat size of two. There are several different drawbridge configurations between the cores. (IOB: I/O block; CLB: configuration logic block

Fluid Dynamic - Structural Interactions of Labyrinth Seals.

DTIC Science & Technology

1986-08-01

A., "The Leakage of Steam Through Labyrinth Seals ", Trans. ASME, Vol. 57, 1935, pp 115-122. 21. Komotori, K., "A Consideration on the Labyrinth ...October 1980. 17. Vermes, G., "A fluid-Mechanics Approach to the Labyrinth Seal Leakage Problem", Journal of Basic Engineering, Tr. ASME, Series D...INTERACTIONS OF LABYRINTH SEALS Manuel Martinez-Sanchez John Dugundji Gas Turbine and Plasma Dynamics Laboratory D T IC Department of Aeronautics and

Evaluation of Nanocomposites as Lightweight Electronic Enclosures for Satellites’ Applications

DTIC Science & Technology

2008-06-01

vol. 36, pp. 59-63, 2000. [15] H . Helvajian and E. Y. Robinson, Micro- and Nanotechnology for Space Systems. Los Angeles: The Aerospace Press, 1997...D. Alexander. Nickel NanostrandsTM Expand Nanotechnology Engineering Capabilities. Available: http://www.afrl.af.mil. [2] M. D. Alexander, H . Dowty...Nanofibers and Ni Nanostrands," in NSMMS Meeting, 2006. [3] D. F. Bahr, H . Kung, N. R. Moody and K. J. Wahl, Mechanical Properties Derived from

JPRS Report, Science & Technology. China.

DTIC Science & Technology

1989-03-29

Commun ., Vol COM-29, No 6, pp 895-901, June 1981. [4] R.C. Titsworth , "A Boolean-Function-Multiplexed Telemetry System," IEEE Trans, on SET, pp 42...Reagents 39 Gene-Engineered Human Epithelium Growth Factor (hEGF) 39 Superfine Snake Venom 39 COMPUTERS Ai Computer System LISP-MI [Zheng Shouqi, et...XUEBAO, No 3, Jun 88] 134 Coordinated Development of Microwave, Optical Communications [Zhang Xu; DIANXIN KUAIBAO, No 11, Nov 88] 143 Error

USSR Report: Electronics and Electrical Engineering

DTIC Science & Technology

1985-01-23

item originate with the source. Times within items are as given by source. The contents of this publication in no way represent the policies, views ...Integrated Optics (V.l. Vol’man, N.D. Kozyrev ; RADIOTEKHNIKA, No 8, Aug 84).. 6 Coordinate Determination Errors in Measuring Characteristics of...I KINEMATOGRAFII, No 4, Jul-Aug 84) . 8 Modified Signal-1 Device for Remote Control of Toys and Models (V. Borisov, A. Proskurin; RADIO, No 6

Research Investigation Directed Toward Extending the Useful Range of the Electromagnetic Spectrum.

DTIC Science & Technology

1981-03-31

tunneling devices are predicted to undergo a transition from energy detectors to photon counters at frequencies where the photon energy becomes...Ed. (Springer-Verlag, Berlin/Heidelberg, 1977), vol. 19, Optical and Infrared Detectors , ch. 7, pp. 229-300. (16) M. C. Teich, Opt. Engineering 17...InSb, AuGe or a HgCdTe infrared detector . These detectors only viewed the emission through the appropriate infrared filters. The output from the

Improved Problem Formulation in Engineering Systems Design

DTIC Science & Technology

1990-05-01

Journal model is ASME Journal of Mechanical Design. 2 1.1 Research Objective and Methods The objective of this research project was to improve...Methods and Theories, Journal of Design Methods Group, Vol. 20, No. 2, 1986, p. 410. 19 Nadler, G., Smith, J. M. and Frey, C. E., "Problem...sources do you routinely use to gather the information you need to develop a packaging system? 26 Trade journals 6 Consultants 21 Reference books 26

SERS Engineering Collaboration

DTIC Science & Technology

2012-06-01

laser beam. In the second approach, a pulsed laser was used to texture a silicon wafer to form sharp features. Silver was evaporated onto the wafer...orders of magnitude larger than that measured on a gold nanoparticle array on a glass substrate. The largest SERS enhancement for a silver device was...surface plasmons," Yizhuo Chu and Kenneth B. Crozier, Optics Letters vol. 34, 244 (2009) K3. "Gold nanorings as substrates for surface-enhanced Raman

Implementing Feminist Theory in Engineering: Obstacles within the Gender Studies Tradition

ERIC Educational Resources Information Center

Udén, Maria K.

2017-01-01

Scholars have noted that there is hesitation to utilise findings from gender studies in engineering education. Issues within gender studies may be part of the matching problem. Debates concerning two concepts for new engineering paradigms are investigated: "care" and "heterogeneity." Their appeals and the respective…

Engine Identification. Teacher's Guide. Small Engine Repair Series.

ERIC Educational Resources Information Center

Hill, Pamela

This teacher's guide is part of an instructional series on small engine repair that is intended for use with mentally retarded and learning disabled students in general mechanical repair programs. The package also includes three student manuals. Notes to the instructor cover equipment needed, preparation before teaching, and use of evaluation…

Flight-vehicle materials, structures, and dynamics - Assessment and future directions. Vol. 4 - Tribological materials and NDE

NASA Technical Reports Server (NTRS)

Fusaro, Robert L. (Editor); Achenbach, J. D. (Editor)

1993-01-01

The present volume on tribological materials and NDE discusses liquid lubricants for advanced aircraft engines, a liquid lubricant for space applications, solid lubricants for aeronautics, and thin solid-lubricant films in space. Attention is given to the science and technology of NDE, tools for an NDE engineering base, experimental techniques in ultrasonics for NDE and material characterization, and laser ultrasonics. Topics addressed include thermal methods of NDE and quality control, digital radiography in the aerospace industry, materials characterization by ultrasonic methods, and NDE of ceramics and ceramic composites. Also discussed are smart materials and structures, intelligent processing of materials, implementation of NDE technology on flight structures, and solid-state weld evaluation.

A Bibliography of Externally Published Works by the SEI Engineering Techniques Program

DTIC Science & Technology

1992-08-01

media, and virtual reality * model- based engineering * programming languages * reuse * software architectures * software engineering as a discipline...Knowledge- Based Engineering Environments." IEEE Expert 3, 2 (May 1988): 18-23, 26-32. Audience: Practitioner [Klein89b] Klein, D.V. "Comparison of...Terms with Software Reuse Terminology: A Model- Based Approach." ACM SIGSOFT Software Engineering Notes 16, 2 (April 1991): 45-51. Audience: Practitioner

Civil Engineering Applications of Ground Penetrating Radar Recent Advances @ the ELEDIA Research Center

NASA Astrophysics Data System (ADS)

Salucci, Marco; Tenuti, Lorenza; Nardin, Cristina; Oliveri, Giacomo; Viani, Federico; Rocca, Paolo; Massa, Andrea

2014-05-01

The application of non-destructive testing and evaluation (NDT/NDE) methodologies in civil engineering has raised a growing interest during the last years because of its potential impact in several different scenarios. As a consequence, Ground Penetrating Radar (GPR) technologies have been widely adopted as an instrument for the inspection of the structural stability of buildings and for the detection of cracks and voids. In this framework, the development and validation of GPR algorithms and methodologies represents one of the most active research areas within the ELEDIA Research Center of the University of Trento. More in detail, great efforts have been devoted towards the development of inversion techniques based on the integration of deterministic and stochastic search algorithms with multi-focusing strategies. These approaches proved to be effective in mitigating the effects of both nonlinearity and ill-posedness of microwave imaging problems, which represent the well-known issues arising in GPR inverse scattering formulations. More in detail, a regularized multi-resolution approach based on the Inexact Newton Method (INM) has been recently applied to subsurface prospecting, showing a remarkable advantage over a single-resolution implementation [1]. Moreover, the use of multi-frequency or frequency-hopping strategies to exploit the information coming from GPR data collected in time domain and transformed into its frequency components has been proposed as well. In this framework, the effectiveness of the multi-resolution multi-frequency techniques has been proven on synthetic data generated with numerical models such as GprMax [2]. The application of inversion algorithms based on Bayesian Compressive Sampling (BCS) [3][4] to GPR is currently under investigation, as well, in order to exploit their capability to provide satisfactory reconstructions in presence of single and multiple sparse scatterers [3][4]. Furthermore, multi-scaling approaches exploiting level-set-based optimization have been developed for the qualitative reconstruction of multiple and disconnected homogeneous scatterers [5]. Finally, the real-time detection and classification of subsurface scatterers has been investigated by means of learning-by-examples (LBE) techniques, such as Support Vector Machines (SVM) [6]. Acknowledgment - This work was partially supported by COST Action TU1208 'Civil Engineering Applications of Ground Penetrating Radar' References [1] M. Salucci, D. Sartori, N. Anselmi, A. Randazzo, G. Oliveri, and A. Massa, 'Imaging Buried Objects within the Second-Order Born Approximation through a Multiresolution Regularized Inexact-Newton Method', 2013 International Symposium on Electromagnetic Theory (EMTS), (Hiroshima, Japan), May 20-24 2013 (invited). [2] A. Giannopoulos, 'Modelling ground penetrating radar by GprMax', Construct. Build. Mater., vol. 19, no. 10, pp.755 -762 2005 [3] L. Poli, G. Oliveri, P. Rocca, and A. Massa, "Bayesian compressive sensing approaches for the reconstruction of two-dimensional sparse scatterers under TE illumination," IEEE Trans. Geosci. Remote Sensing, vol. 51, no. 5, pp. 2920-2936, May. 2013. [4] L. Poli, G. Oliveri, and A. Massa, "Imaging sparse metallic cylinders through a Local Shape Function Bayesian Compressive Sensing approach," Journal of Optical Society of America A, vol. 30, no. 6, pp. 1261-1272, 2013. [5] M. Benedetti, D. Lesselier, M. Lambert, and A. Massa, "Multiple shapes reconstruction by means of multi-region level sets," IEEE Trans. Geosci. Remote Sensing, vol. 48, no. 5, pp. 2330-2342, May 2010. [6] L. Lizzi, F. Viani, P. Rocca, G. Oliveri, M. Benedetti and A. Massa, "Three-dimensional real-time localization of subsurface objects - From theory to experimental validation," 2009 IEEE International Geoscience and Remote Sensing Symposium, vol. 2, pp. II-121-II-124, 12-17 July 2009.

Direct Initiation Through Detonation Branching in a Pulsed Detonation Engine

DTIC Science & Technology

2008-03-01

important features noted ................................. 33  Figure 20. GM Quad 4 engine head used as the PDE research engine with the detonation tube...Deflagration to Detonation Transition EF – Engine Frequency FF – Fill Fraction NPT – National Pipe Thread MPT – Male National Pipe Thread PDE – Pulsed... Detonation Engines ( PDE ) has increased greatly in recent years due in part to the potential for increased thermal efficiency derived from constant

77 FR 280 - Rhode Island Engine Genco LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-04

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER12-674-000] Rhode Island Engine Genco LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request for Blanket... Engine Genco LLC's application for market-based rate authority, with an accompanying rate tariff, noting...

40 CFR 1054.690 - What bond requirements apply for certified engines?

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Before introducing certified engines into U.S. commerce, you must post a bond to cover any potential... importing engines that have been certified by someone else. Note that you might also post bond under this... test conducted by EPA officials or having been found by EPA to be noncompliant under applicable...

40 CFR 1054.690 - What bond requirements apply for certified engines?

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Before introducing certified engines into U.S. commerce, you must post a bond to cover any potential... importing engines that have been certified by someone else. Note that you might also post bond under this... test conducted by EPA officials or having been found by EPA to be noncompliant under applicable...

40 CFR 1054.690 - What bond requirements apply for certified engines?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Before introducing certified engines into U.S. commerce, you must post a bond to cover any potential... importing engines that have been certified by someone else. Note that you might also post bond under this... test conducted by EPA officials or having been found by EPA to be noncompliant under applicable...

40 CFR 1054.690 - What bond requirements apply for certified engines?

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Before introducing certified engines into U.S. commerce, you must post a bond to cover any potential... importing engines that have been certified by someone else. Note that you might also post bond under this... test conducted by EPA officials or having been found by EPA to be noncompliant under applicable...

40 CFR 1054.690 - What bond requirements apply for certified engines?

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Before introducing certified engines into U.S. commerce, you must post a bond to cover any potential... importing engines that have been certified by someone else. Note that you might also post bond under this... test conducted by EPA officials or having been found by EPA to be noncompliant under applicable...

Emission and combustion profile study of unmodified research engine propelled with neat biofuels.

PubMed

Devarajan, Yuvarajan; Mahalingam, Arulprakasajothi; Munuswamy, Dinesh Babu; Nagappan, Beemkumar

2018-05-07

The current work focuses on the experimental investigation to analyze the combustion and emission characteristics of a direct injection diesel engine fueled with neat biodiesel (BD100) and different proportions of cyclohexanol blends as a fuel additive in various volume fractions. Cyclohexanol is dispersed into a neat biodiesel in a volume fraction of 10, 20, and 30 vol%. The biodiesel is produced from neem oil by the conventional transesterification process. The experimental results revealed that with the increased cyclohexanol fraction, the combustion was found smooth. The addition of cyclohexanol has a positive influence on various physical and chemical properties of neat biodiesel. The in-cylinder pressure is comparatively low for diesel followed by cyclohexanol and biodiesel blends when compared with neat biodiesel. This is due to shorter ignition delay period. The heat-release rate of neat biodiesel is the highest among all fuels. The overall HC emission of BD70COH30 is 12.19% lower than BD100 and 16.34% lower than diesel. The overall CO 2 emission of BD70COH30 is 13.91% higher than BD100 and 19.5% higher than diesel. The overall NO x emission of BD70COH30 is 5.31% lower than BD100 at all load engine operations. The presence of 10, 20, and 30% of cyclohexanol in biodiesel decreased smoke emissions as compared with neat biodiesel and diesel. The overall smoke emission of BD70COH30 is 19.23% lower than BD100 and 25.51% lower than diesel. The overall CO emission of cyclohexanol blended with biodiesel by 30 vol% (BD70COH30) is 17% lower than neat biodiesel and 21.8% lower than diesel. Based on the outcome of this study, neem oil biodiesel and cyclohexanol blends can be employed as a potential alternative fuel for existing unmodified diesel engines owing to its lesser emission characteristics.

High Thermal Conductivity NARloy-Z-Diamond Composite Combustion Chamber Liner For Advanced Rocket Engines

NASA Technical Reports Server (NTRS)

Bhat, Biliyar N.; Ellis, David; Singh, Jogender

2014-01-01

Advanced high thermal conductivity materials research conducted at NASA Marshall Space Flight Center (MSFC) with state of the art combustion chamber liner material NARloy-Z showed that its thermal conductivity can be increased significantly by adding diamond particles and sintering it at high temperatures. For instance, NARloy-Z containing 40 vol. percent diamond particles, sintered at 975C to full density by using the Field assisted Sintering Technology (FAST) showed 69 percent higher thermal conductivity than baseline NARloy-Z. Furthermore, NARloy-Z-40vol. percent D is 30 percent lighter than NARloy-Z and hence the density normalized thermal conductivity is 140 percent better. These attributes will improve the performance and life of the advanced rocket engines significantly. By one estimate, increased thermal conductivity will directly translate into increased turbopump power up to 2X and increased chamber pressure for improved thrust and ISP, resulting in an expected 20 percent improvement in engine performance. Follow on research is now being conducted to demonstrate the benefits of this high thermal conductivity NARloy-Z-D composite for combustion chamber liner applications in advanced rocket engines. The work consists of a) Optimizing the chemistry and heat treatment for NARloy-Z-D composite, b) Developing design properties (thermal and mechanical) for the optimized NARloy-Z-D, c) Fabrication of net shape subscale combustion chamber liner, and d) Hot fire testing of the liner for performance. FAST is used for consolidating and sintering NARlo-Z-D. The subscale cylindrical liner with built in channels for coolant flow is also fabricated near net shape using the FAST process. The liner will be assembled into a test rig and hot fire tested in the MSFC test facility to determine performance. This paper describes the development of this novel high thermal conductivity NARloy-Z-D composite material, and the advanced net shape technology to fabricate the combustion chamber liner. Properties of optimized NARloy-Z-D composite material will also be presented.

Synthesis and Characterization of Block Copolymers with Unique Chemical Functionalities and Entropically-Hindering Moieties

DTIC Science & Technology

2017-08-14

Synthesis and Characterization of Sulfonated Amine Block Copolymers for Energy Efficient Applications". Chemical Engineering Symposium, University of...Specialty Separations” Oral Presentation during the 2014 Chemical Engineering Department Symposium (Key Note Speaker), University of Puerto Rico, Mayaguez...Leadership Award in the College of Engineering of the University of Puerto Rico, May, 2015. 3. Distinguished Professor of Chemical Engineering

Antioxidant (A-tocopherol acetate) effect on oxidation stability and NOx emission reduction in methyl ester of Annona oil operated diesel engine

NASA Astrophysics Data System (ADS)

Senthil, R.; Silambarasan, R.; Pranesh, G.

2017-05-01

There is a major drawback while using biodiesel as a alternate fuel for compression ignition diesel engine due to lower heating value, higher viscosity, higher density and higher oxides of nitrogen emission. To minimize these drawbacks, fuel additives can contribute towards engine performance and exhaust emission reduction either directly or indirectly. In this current work, the test was conducted to investigate the effect of antioxidant additive (A-tocopherol acetate) on oxidation stability and NOx emission in a of Annona methyl ester oil (MEAO) fueled diesel engine. The A-tocopherol acetate is mixed in different concentrations such as 0.01, 0.02, 0.03 and 0.04% with 100% by vol MEAO. It is concluded that the antioxidant additive very effective in increasing the oxidation stability and in controlling the NOx emission. Further, the addition of antioxidant additive is slight increase the HC, CO and smoke emissions. Hence, A-tocopherol acetate is very effective in controlling the NOx emission with MEAO operated diesel engine without any major modification.

Quantum error correcting codes and 4-dimensional arithmetic hyperbolic manifolds

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guth, Larry, E-mail: lguth@math.mit.edu; Lubotzky, Alexander, E-mail: alex.lubotzky@mail.huji.ac.il

2014-08-15

Using 4-dimensional arithmetic hyperbolic manifolds, we construct some new homological quantum error correcting codes. They are low density parity check codes with linear rate and distance n{sup ε}. Their rate is evaluated via Euler characteristic arguments and their distance using Z{sub 2}-systolic geometry. This construction answers a question of Zémor [“On Cayley graphs, surface codes, and the limits of homological coding for quantum error correction,” in Proceedings of Second International Workshop on Coding and Cryptology (IWCC), Lecture Notes in Computer Science Vol. 5557 (2009), pp. 259–273], who asked whether homological codes with such parameters could exist at all.

SPERTI Control Building (PER601). Elevations. Note cable inlet on west ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

SPERT-I Control Building (PER-601). Elevations. Note cable inlet on west elevation. Idaho Operations Office. Date: February 1955. INEEL index no. 760-0601-00-396-109143 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF (PER620) west facade. Camera facing east. Note 1980 addition ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) west facade. Camera facing east. Note 1980 addition on south side of west wall. Date: March 2004. INEEL negative no. HD-41-3-3 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Development of Fiber Reinforced Track Pad Materials

DTIC Science & Technology

1986-04-01

Transfer and Vulcanization of Rubber , I.R.I. Monograph, Elsevier, 1971. 12 Bergstrom, E.W., " Wear Resistant Rubber Tank Track Pads," Rock Island Arsenal...Fracture Mechanics to Rubber Articles, Including Tyres ," Phil. Trans. R. Soc. Lond. A299,,189-202 (1981). 10 Gent, Fielding-Russell, Livingston, and...System for Rubber Bonded to Brass-Plated Steel Tyre Cord," NR Technology, vol 11, Part 2, 1980, pp 21-27. 16 Lindley, P.B., Engineering Design with

Defense AT and L Magazine. Vol. 46, no. 4, July-August 2017

DTIC Science & Technology

2017-07-01

engineering. He also is a certified Project Manage - ment Professional. Supply Chain Management SCM has become a vital tool used in today’s global economy to...modifying the project management dashboards originally developed by one of the authors, described in “Leveraging Fidelity of Performance­Based Metric...Tools for Project Man­ agement,” an article in the January­February 2003 issue of Program Manager , the predecessor of Defense AT&L magazine

Physics Based Modeling of Compressible Turbulance

DTIC Science & Technology

2016-11-07

is  shown  in  Fig.  1.  It  includes  the  test  section  of  the   wind  tunnel   used   in   the   experiments...points each. Fo each of these probes, data was taken at 48 equidistant locations along a ring in the azimuthal direction. In the simulation, we angle the...direction) Journal of Engineering for Gas Turbines and Power MAY 2013, Vol. 135 / 051202-3 Downloaded From: http

Heat Transfer Enhancement due to Bubble Pumping in FC-72 Near the Saturation Temperature

DTIC Science & Technology

1991-03-01

boiling, (2) reducing wall superheat during nucleate boiling and (3) enhancing critical heat flux ( Mudawar , 1990) . Since the heat transfer potential of...flux from a simulated electronic chip attached to the wall of a vertical rectangular channel was determined by Mudawar and Madox (1988). They concluded...Surface Boiling," Industrial and Engineering Chemistry, vol. 41, No. 9, 1949. Mudawar , I., and D.E. Maddox, Critical Heat Flux in Subcooled Flow Boiling

Turbulent Flame Stabilization Methods Using Confinement, Diluents, and High-Potential Electric Fields

DTIC Science & Technology

2014-08-03

the corona discharge was optimal for flame stabilization when it was located where fuel/air mixtures were within flammability limits locally...field [56]. This ionic wind is also known as the “ corona wind” [57] due to the corona discharge that develops at the sharp edge of the charged... Corona Discharge ,” Transactions of the American Institute of Electrical Engineers, Part I: Communication and Electronics, vol. 80, no. 2, pp. 143-150

Defense Acquisition Research Journal. Volume 24, Number 1, Issue 80

DTIC Science & Technology

2017-01-01

aol.com. ISSUE 80 JANUARY 2017 VOL. 24 NO. 1 1 We’re on the Web at: http://www.dau.mil/publications/DefenseARJ/default.aspx and http...central website that would help facilitate teaming among complementary small businesses. • For technical proposals, use white papers as an initial screen...Engineering from The University of Alabama in Huntsville. (E-mail address: ronnie.schilling@mda.mil) Dr. Thomas A . Mazzuchi is cha ir of the Department

SRP engineering and design history, Vol III, 200 F and H Areas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Banick, C.J.

2000-04-17

This volume combines the record of events relating to the development of design for both the 200-F and H Areas. Chronologically, the definition of plant facilities was first established for the 200-F Area. The second area, 200-H, was projected initially to be a supplementary plutonium separations facility. This history explains the differences in character and capacity of the manufacturing facilities in both areas as production requirements and experience with separations processes advanced.

Final Intrinsic Remediation Engineering Evaluation/Cost Analysis for the FT-002 Site, Plattsburg Air Force Base, New York

DTIC Science & Technology

1995-04-01

including the BTEX compounds (e.g., Jamison et al., 1975; Atlas , 1981, 1984, 1988; Gibson, 1984; Reinhard et al., 1984; Young, 1984; Bartha , 1986; Wilson...1981, Microbial degradation of petroleum hydrocarbons - an environmental perspective: Microbiological Reviews, vol. 45, no. 1, p. 180-209. Atlas , R.M...sand aquifer: Ground Water Monitoring Review, Winter, 1987, p. 64-71. Bartha , R., 1986, Biotechnology of petroleum pollutant biodegradation: Microbial

Engineering Use of Geotextiles in Railroad Track Construction and Rehabilitation

DTIC Science & Technology

1991-09-01

installations in the railroad industry have not been well documented in the published literature. Poor performance of geotextiles in railroad applications is...34Filter Criteria for Geotextiles", Proceedings of the Second International Conference on Geotextiles, Vol I, pp 103-108. Industrial Fabrics Association...ml bottles. d. Wood stakes, each 30 in. long. e. Pick and shovel. f. Heavy duty stapler . g. Ruler. 3. Procedure a. In a silty soil, locate a site with

USSR and Eastern Europe Scientific Abstracts, Electronics and Electrical Engineering, Number 33.

DTIC Science & Technology

1977-09-27

reduces to an infinite system of linear homogeneous algebraic equations and leads to Mathieu functions of the k-th order. The solution is convergent in...cylinder walls to be infinitesimally thin ideal conductors. The problem is reduced to a system of Fredholm linear algebraic equations of the second...EXPECTED DEVELOPMENTS OF TRANSISTORIZED LOW-NOISE MICROWAVE AMPLIFIERS Prague SDELOVACI TECHNIKA in Czech Vol 25, No 2, Feb 77 pp 47-49 TALLO, ANTON

Aligned Carbon Nanotube Carpets on Carbon Substrates for High Power Electronic Applications

DTIC Science & Technology

2016-06-01

SiOx by a vapor-solid-solid mechanism ,” J. Am. Chem. Soc., vol. 133, pp. 197–199, 2011. [146] B. Liu, W. Ren, C. Liu, C.-H. Sun , L. Gao, S. Li, C... Mechanical and Thermal Systems Branch Power and Control Division JUNE 2016 Interim Report DISTRIBUTION STATEMENT A: Approved for public release...Advisor Program Engineer Mechanical and Thermal Systems Branch Mechanical and Thermal Systems Branch Power and Control Division Power and Control

A Correlation Between the Heat Affected Zone Microstructure and the Thermal History During Welding of HY-130 Steel.

DTIC Science & Technology

1981-09-01

Engineers, Vol. 162, n 223, 1945. 16. Grange, R. A. and Baughman, R. W., "Hardness of Tempered Martensite in Carbon and Low Alloy Steels ," Transactions...One possible explanation is the forma- tion of the delta ferrite phase (with its attendant very low carbon solubility) in the vicinity of the fusion...32 18. isothermal Transformation Diagram for HY-130 (T) Steel -------------------------------------------- 3 19. Peak Temperature vs

Nuclear materials 1993 annual report. Volume 8, No. 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-05-01

This annual report of the US Nuclear Regulatory Commission`s Office for Analysis and Evaluation of Operational Data (AEOD) describes activities conducted during 1993. The report is published in two parts. NUREG-1272, Vol. 8, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about the trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from such sources as licensee event reports, diagnostic evaluations, and reports to the NRC`s Operationsmore » Center. NUREG-1272, Vol. 8, No. 2, covers nuclear materials and presents a review of the events and concerns during 1993 associated with the use of licensed material in nonreactor applications, such as personnel overexposures and medical misadministrations. Note that the subtitle of No. 2 has been changed from ``Nonreactors`` to ``Nuclear Materials.`` Both reports also contain a discussion of the Incident Investigation Team program and summarize both the Incident Investigation Team and Augmented Inspection Team reports. Each volume contains a list of the AEOD reports issued from 1980 through 1993.« less

Magnetohydrodynamics (MHD) Engineering Test Facility (ETF) 200 MWe power plant. Conceptual Design Engineering Report (CDER) supplement. Magnet system special investigations

NASA Technical Reports Server (NTRS)

1981-01-01

The results of magnet system special investigations listed below are summarized: 4 Tesla Magnet Alternate Design Study; 6 Tesla Magnet Manufacturability Study. The conceptual design for a 4 Tesla superconducting magnet system for use with an alternate (supersonic) ETF power train is described, and estimated schedule and cost are identified. The magnet design is scaled from the ETF 6 T Tesla design. Results of a manufacturability study and a revised schedule and cost estimate for the ETF 6 T magnet are reported. Both investigations are extensions of the conceptual design of a 6 T magnet system performed earlier as a part of the overall MED-ETF conceptual design described in Conceptual Design Engineering Report (CDER) Vol. V, System Design Description (SDD) 503 dated September, 1981, DOE/NASA/0224-1; NASA CR-165/52.

Defense Threat Reduction Agency > Research > DTRIAC > DTRIAC Dispatch

Science.gov Websites

@mail.mil with your submissions. DTRIAC Dispatch - Vol 5, Issue 3 DTRIAC Dispatch - Vol 5, Issue 2 DTRIAC Dispatch - Vol 5, Issue 1 DTRIAC Dispatch - Vol 4, Issue 1 DTRIAC Dispatch - Vol 3, Issue 4 DTRIAC Dispatch - Vol 3, Issue 3 DTRIAC Dispatch - Vol 3, Issue 2 DTRIAC Dispatch - Vol 3, Issue 1 DTRIAC Dispatch - Vol

40 CFR 94.1 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM MARINE COMPRESSION-IGNITION ENGINES General Provisions for Emission Regulations for Compression-Ignition Marine Engines § 94.1 Applicability. (a) Except as noted in paragraphs (b) and (c) of...

11. PHOTOCOPY OF DRAWING 99S1, FIRE ENGINE HOUSE, FOUNDATION PLAN, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. PHOTOCOPY OF DRAWING 99-S-1, FIRE ENGINE HOUSE, FOUNDATION PLAN, MARCH 1900. NOTE THAT THIS PHOTOCOPY IS OF A MICROFILM ENLARGEMENT, ORIGINAL DRAWING LOST. - Mare Island Naval Shipyard, Firehouse, Vallejo, Solano County, CA

Initial Morphologic Evolution of Perdido Key Berm Nourishment, Florida

DTIC Science & Technology

2013-08-01

December 18, 2011). METHODOLOGY : This study is based on beach-nearshore profiles, sediment samples, and wave data collected during the first 6 months...preparation). Vicksburg, MS: US Army Engineering Reserach and Development Center. NOTE: The contents of this technical note are not to be used for

PBF Control Building (PER619) south facade. Camera faces north. Note ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Control Building (PER-619) south facade. Camera faces north. Note buried tanks with bollards protecting their access hatches. Date: July 2004. INEEL negative no. HD-41-10-4 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Mission Engineering Competencies Technical Report

DTIC Science & Technology

2018-04-30

generate a mission capability. Note that foundational skills – e.g. math , natural or social sciences, general engineering skills - are not listed in...basic understanding of math , sciences, and the fundamentals of engineering are assumed, the foundational building block for mission...April 30, 2018 69 The Helix model focuses on 6 proficiency areas (Hutchison et al. 2018): 1. Math /Science/General

Characterisation

DTIC Science & Technology

2007-03-01

Characterisation. In Nanotechnology Aerospace Applications – 2006 (pp. 4-1 – 4-8). Educational Notes RTO-EN-AVT-129bis, Paper 4. Neuilly-sur-Seine, France: RTO...the Commercialisation Processes Concept IDEA Proof-of- Principle Trial Samples Engineering Verification Samples Design Verification Samples...SEIC Systems Engineering for commercialisation Design Houses, Engineering & R&D USERS & Integrators SE S U R Integrators Fabs & Wafer Processing Die

Talking to Texts and Sketches: The Function of Written and Graphic Mediation in Engineering Design.

ERIC Educational Resources Information Center

Lewis, Barbara

2000-01-01

Describes the author's research that explores the role of language, particularly texts, in the engineering design process. Notes that results of this case study support a new "mediated" model of engineering design as an inventional activity in which designers use talk, written language, and other symbolic representations as tools to think about…

DISC BRAKE SYSTEM (CENTER), INCLUDING BELT DRIVE TO SECONDARY GENERAL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DISC BRAKE SYSTEM (CENTER), INCLUDING BELT DRIVE TO SECONDARY GENERAL MOTORS ENGINE (LEFT)AND FERREL REDUCTION GEAR CONNECTION TO ALLIS-CHALMERS DIESEL ENGINE (RIGHT), LOOKING NORTH. NOTE TORQUE CONVERTER (TOP) AND THROTTLE (BELOW) LINES CONNECTING TO PRIMARY ENGINE. - Mad River Glen, Single Chair Ski Lift, 62 Mad River Glen Resort Road, Fayston, Washington County, VT

View forward in starboard engine room, compartment C1. Lagged cylinders ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View forward in starboard engine room, compartment C-1. Lagged cylinders at lower right are part of a steam engine that poers the salt water circulating pumps. Note main throttle wheel at lower center of photograph. Handles at lower center are cylinder manifold drains. Handles to the right are engine starting valves. (062) - USS Olympia, Penn's Landing, 211 South Columbus Boulevard, Philadelphia, Philadelphia County, PA

Y-12 Plant decontamination and decommissioning technology logic diagram for Building 9201-4. Volume 2: Technology logic diagram

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-09-01

The Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4 (TLD) was developed to provide a decision-support tool that relates decontamination and decommissioning (D and D) problems at Bldg. 9201-4 to potential technologies that can remediate these problems. This TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to D and D and waste management (WM) activities. It is essential that follow-on engineering studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologiesmore » identified in the TLD and by finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Volume 2 contains the logic linkages among environmental management goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 2 has been divided into five sections: Characterization, Decontamination, Dismantlement, Robotics/Automation, and Waste Management. Each section contains logical breakdowns of the Y-12 D and D problems by subject area and identifies technologies that can be reasonably applied to each D and D challenge.« less

High Performance Graphene Oxide Based Rubber Composites

PubMed Central

Mao, Yingyan; Wen, Shipeng; Chen, Yulong; Zhang, Fazhong; Panine, Pierre; Chan, Tung W.; Zhang, Liqun; Liang, Yongri; Liu, Li

2013-01-01

In this paper, graphene oxide/styrene-butadiene rubber (GO/SBR) composites with complete exfoliation of GO sheets were prepared by aqueous-phase mixing of GO colloid with SBR latex and a small loading of butadiene-styrene-vinyl-pyridine rubber (VPR) latex, followed by their co-coagulation. During co-coagulation, VPR not only plays a key role in the prevention of aggregation of GO sheets but also acts as an interface-bridge between GO and SBR. The results demonstrated that the mechanical properties of the GO/SBR composite with 2.0 vol.% GO is comparable with those of the SBR composite reinforced with 13.1 vol.% of carbon black (CB), with a low mass density and a good gas barrier ability to boot. The present work also showed that GO-silica/SBR composite exhibited outstanding wear resistance and low-rolling resistance which make GO-silica/SBR very competitive for the green tire application, opening up enormous opportunities to prepare high performance rubber composites for future engineering applications. PMID:23974435

High performance graphene oxide based rubber composites.

PubMed

Mao, Yingyan; Wen, Shipeng; Chen, Yulong; Zhang, Fazhong; Panine, Pierre; Chan, Tung W; Zhang, Liqun; Liang, Yongri; Liu, Li

2013-01-01

In this paper, graphene oxide/styrene-butadiene rubber (GO/SBR) composites with complete exfoliation of GO sheets were prepared by aqueous-phase mixing of GO colloid with SBR latex and a small loading of butadiene-styrene-vinyl-pyridine rubber (VPR) latex, followed by their co-coagulation. During co-coagulation, VPR not only plays a key role in the prevention of aggregation of GO sheets but also acts as an interface-bridge between GO and SBR. The results demonstrated that the mechanical properties of the GO/SBR composite with 2.0 vol.% GO is comparable with those of the SBR composite reinforced with 13.1 vol.% of carbon black (CB), with a low mass density and a good gas barrier ability to boot. The present work also showed that GO-silica/SBR composite exhibited outstanding wear resistance and low-rolling resistance which make GO-silica/SBR very competitive for the green tire application, opening up enormous opportunities to prepare high performance rubber composites for future engineering applications.

MTR WING, TRA604. ONE OF THE LABORATORY UNITS ALONG THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MTR WING, TRA-604. ONE OF THE LABORATORY UNITS ALONG THE SOUTH SIDE WALL. NOTE SINK, CABINET, TABLE, AND HOOD UNITS. DUCT ABOVE RECEIVES CONTAMINATED AIR AND SENDS IT TO FAN HOUSE AND STACK. NOTE PARTITION WALL BEHIND WORK UNITS. THE HEALTH PHYSICS LAB WAS SIMILARLY EQUIPPED. WINDOW AT LEFT EDGE OF VIEW. CARD IN LOWER RIGHT WAS INSERTED BY INL PHOTOGRAPHER TO COVER AN OBSOLETE SECURITY RESTRICTION PRINTED ON ORIGINAL NEGATIVE. INL NEGATIVE NO. 4225. Unknown Photographer, 2/13/1952 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Thermal barrier coatings for aircraft engines: History and directions

NASA Technical Reports Server (NTRS)

Miller, R. A.

1995-01-01

Thin thermal barrier coatings for protecting aircraft turbine section airfoils are examined. The discussion focuses on those advances that led first to their use for component life extension and more recently as an integral part of airfoil design. It is noted that development has been driven by laboratory rig and furnace testing corroborated by engine testing and engine field experience. The technology has also been supported by performance modeling to demonstrate benefits and life modeling for mission analysis. Factors which have led to the selection of the current state-of-the-art plasma sprayed and physical vapor deposited zirconia-yttria/MCrAlY TBC's is emphasized in addition to observations fundamentally related to their behavior. Current directions in research into thermal barrier coatings and recent progress at NASA is also noted.

Research on Building Education & Workforce Capacity in Systems Engineering

DTIC Science & Technology

2011-02-07

manufacturing or design sites where students could observe engineering processes related to their projects Mentors with the highest level of student ... engagement interacted with students in every single activity area and with frequency, while others provided only intermittent correspondence. Note

10. GENERAL VIEW FROM SOUTH WEST. CHIPPER AT LEFT, STEAM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. GENERAL VIEW FROM SOUTH WEST. CHIPPER AT LEFT, STEAM PLANT AT RIGHT. NOTE STEAM EXHAUSTS IN ROOF; LEFT IS MAIN ENGINE, RIGHT IS CARRIAGE DRIVE ENGINE. - Hull-Oakes Lumber Company, 23837 Dawson Road, Monroe, Benton County, OR

33 CFR 276.6 - General policy.

Code of Federal Regulations, 2013 CFR

2013-07-01

... General policy. (a) This provision will be applied only at locations where a congressionally authorized... commenced after certification shall be eligible for certification except for local engineering work noted... improvement. (e) Local interests are responsible for developing all necessary engineering plans and...

33 CFR 276.6 - General policy.

Code of Federal Regulations, 2014 CFR

2014-07-01

... General policy. (a) This provision will be applied only at locations where a congressionally authorized... commenced after certification shall be eligible for certification except for local engineering work noted... improvement. (e) Local interests are responsible for developing all necessary engineering plans and...

33 CFR 276.6 - General policy.

Code of Federal Regulations, 2012 CFR

2012-07-01

... General policy. (a) This provision will be applied only at locations where a congressionally authorized... commenced after certification shall be eligible for certification except for local engineering work noted... improvement. (e) Local interests are responsible for developing all necessary engineering plans and...

Formal methods in computer system design

NASA Astrophysics Data System (ADS)

Hoare, C. A. R.

1989-12-01

This note expounds a philosophy of engineering design which is stimulated, guided and checked by mathematical calculations and proofs. Its application to software engineering promises the same benifits as those derived from the use of mathematics in all other branches of modern science.

View forward from secondary bridge; note stack for venting after ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View forward from secondary bridge; note stack for venting after boilers, ventilators, davits, searchlights on port and starboard stanchions and ship's pulling boats; skylight at lower center provides light to engine room. (p30) - USS Olympia, Penn's Landing, 211 South Columbus Boulevard, Philadelphia, Philadelphia County, PA

PBF (PER620) south facade. Camera facing north. Note pedestrian bridge ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF (PER-620) south facade. Camera facing north. Note pedestrian bridge crossing over conduit. Central high bay contains reactor room and canal. Date: March 2004. INEEL negative no. HD-41-2-1 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

PBF Reactor Building (PER620) Cubicle 13. Plan, section, details. Note ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PBF Reactor Building (PER-620) Cubicle 13. Plan, section, details. Note "quality assurance" code at bottom of drawing. Aerojet Nuclear Company. Date: May 1976. INEEL index no. 761-0620-00-400-195279 - Idaho National Engineering Laboratory, SPERT-I & Power Burst Facility Area, Scoville, Butte County, ID

Emergence and Frustration of Magnetism with Variable-Range Interactions in a Quantum Simulator

DTIC Science & Technology

2013-05-03

quantum entanglement . Here, we engineer frustrated antiferromagnetic interactions between spins stored in a crystal of up to 16 trapped 171Yb+ atoms. We...individual trapped ion spins (10–14) and the observation of spin frus- tration and quantum entanglement in the smallest system of three spins (15). Here...monroe@umd.edu www.sciencemag.org SCIENCE VOL 340 3 MAY 2013 583 and the excitation gap (Fig. 1A) closes, leading to a finite entropy density in the

The Banning of Chemical Weapons: Tantalus Revisited.

DTIC Science & Technology

1983-04-14

of Chemical and Biological Warfare, by Robert Harris and Jeremy Paxman. Chemical and Engineering News, Vol. 60, No. 47, 22 November 1982, p. 34. 3...1 AD-A127 792 THE BANNING OF CHEMICAL WEAPONS: TANTALUS REVISITED(U) 1/1 IARMY WAR COLL CARLISLE BARRACKS PA F N DUREL 14 APR 8 UNCLASSIFIED F/G 15/2...number) Since the mid-ninetenth century, nations have sought to limit the u.s Of chemical weapons with varying degrees of success. On-going

Preconstruction Engineering and Design Phase Reevaluation Report: Olcott Harbor Project. Vol 1: Main Report and Supplemental Environmental Impact Statement

DTIC Science & Technology

1992-09-01

District’s most recent copies of the U.S. Fish and Wildlife Service National Wetland Inventory Maps and the New York State Department of Environmental... Inventory Maps, U.S. Department of the Interior - Fish and Wildlife Service. 9. Bureau of Census, Census of Population and Housing (STFIA), 1980. 10...Bureau of the Census. 16. Inventory - Community Water Systems, New York State (Volume I - Municipal, Volume I1 - Non-Municipal) 1984, New York State

AGARD Flight Test Techniques Series. Volume 14. Introduction to Flight Test Engineering (Introduction a la Technique d’essais en vol)

DTIC Science & Technology

1995-09-01

path and aircraft attitude and other flight or aircraft parameters • Calculations in the frequency domain ( Fast Fourier Transform) • Data analysis...Signal filtering Image processing of video and radar data Parameter identification Statistical analysis Power spectral density Fast Fourier Transform...airspeeds both fast and slow, altitude, load factor both above and below 1g, centers of gravity (fore and aft), and with system/subsystem failures. Whether

Segmentation and Estimation of the Histological Composition of the Tumor Mass in Computed Tomographic Images of Neuroblastoma

DTIC Science & Technology

2001-10-25

a CT image, each voxel contains an integer number which is the CT value, in Hounsfield units (HU), of the voxel. Therefore, the standard method of...Task Number Work Unit Number Performing Organization Name(s) and Address(es) Department of Electrical and Computer Engineering, University of...34, Journal of Pediatric Surgery, vol 24(7), pp. 708-711, 1989. [4] I. N. Bankman, editor, Handbook of Medical Image Analysis, Academic Press, London, UK

Weather as the Decisive Factor of the Aleutian Campaign, June 1942 - August 1943

DTIC Science & Technology

1993-01-01

examine the effect of weather on the living and fighting conditions during the campaign. The Delimitations The study will not examine prewar...airstrip the engineers drained and filled a flooded tidal basin . 52 An innovation available to the Americans and not Japan or Germany was "Marston mat...p, 47. 30 See Aleutians Cawnpaign, p. 87; Army Air Force in World War II, Vol 4, p. 383. ൯ See Aleutians Campaign, pp. 88-89; Argy Air Force in

Processing and Dynamic Failure Characterization of Novel Impact Absorbing Transparent Interpenetrating Polymer Networks (t-IPN)

DTIC Science & Technology

2013-07-05

oven for the same curing treatment as before. The scanning electron microscope (SEM) photo in Figure 19 shows a typical sample with TMSPM and IPTES...Methacrylate-based Polymers,’ S. A . Bird , PhD Dissertation, Department of Polymer and Fiber Engineering, Auburn University, Summer 2013. ’Fracture Behavior...Polymer Networks with Polyurethane-poly(methyl methacrylate),’ K. C. Jajam, S. A . Bird , M. L. Auad, and H. V. Tippur, Polymer Testing, Vol. 32, pp

Non-Linear Metamodeling Extensions to the Robust Parameter Design of Computer Simulations

DTIC Science & Technology

2016-09-15

design By principal component analysis," Total Quality Management, vol. 8, no. 6, pp. 409-416, 1997. [25] A. Salmasnia, R. B . Kazemzadeh and S. T . A...and D. T . Sturrock, Simulation with Arena (3rd ed.), New York, NY: McGraw-Hill, 2004. [85] A. M. Mathai and S. B . Provost, Quadratic Forms in Random...PhD Member ADEDEJI B . BADIRU, PhD Dean, Graduate School of Engineering and Management iv AFIT-ENS-DS-16-S-026 Abstract Robust

Modeling and Characterization of Phonon Transmission and Generation across Engineered and Strained Interfaces for Developing Structure-Property Relations of Functional Nanostructures

DTIC Science & Technology

2015-05-21

translation of; report supersedes; old edition number, etc. 14. ABSTRACT. A brief (approximately 200 words) factual summary of the most significant... Chemistry C, Vol. 117, pp. 24716-24725, 2013. 21. Jose Ordonez-Miranda, Ronggui Yang, and J.J. Alvarado-Gil, A New Constitutive Equation for Nano-to...for attending ASME/IMECE 2012 in Houston, TX. Jun Liu, March 2012, “Most Excited Molecules” for his presentation at 12th GEAR2S Conference

Conference Proceedings of Engine Cyclic Durability by Analysis and Testing

DTIC Science & Technology

1984-01-01

mesurant l’amplitude par jauge extensom6trique. Essais de survitesse *~V Toujours pour les rotors, des essais de survitesse sont effectuds au puits sous...statiques de vol 616mentaire de laboratoire temp~ratures Y: 7 Certification Mesures par mesure des D~finition de Easais aur Essais cyoliques -*- jauges ...fins, et la photo-61asticit6. Los contraintes ainsi calculdes sont vdrifi~es A l’aide do mesures par jauges . 18-5 Les zones jugdes critiques (fig. 8

Facilities Engineering Applications Program: Lead Monitoring Strategies for Drinking Water Systems: Lessons Learned

DTIC Science & Technology

1991-02-01

significant amount of lead mobilization. Studies by Lyson and Lenihan,ŝ Wong and Berrang,2 ° and Ierrra, t al.2’ describe this action and document the...Karaleka,. Jr. 1m I) V. Dc err , c a). T. Lyson and J. Lcnihan. ’Corrosion in Solder Jointed Copper tbes Resulting in Lead Contamination of Drinking...Boston Area," Journal of the New England Water Works Association, Vol 90 (1976). Lyson , T., and J. Lenihan, "Corrosion in Solder Jointed Copper Tubes

National Dam Safety Program. Stony Brook Watershed Dam Site Number 7 (NJ00344), Raritan River Basin, Stony Brook, Mercer County, New Jersey. Phase 1 Inspection Report.

DTIC Science & Technology

1980-02-01

for Permit for Construction and Repair of Dam" filed on March 16, 1959. f. Design and Construction History Design data on file with NJDEP include: 1...LAr- Us a-2. hr’s. LA9~ WATF=R? SiQ_~~- SL- !E q VOL ( YFv - mcA>-) (Acmr-- =T.) 2o4~ 2-Ito STORCH ENGINEERS shootL... of 11. Project FmnnK Wmr=X---A-1

Lightweight Portable Plasma Medical Device - Plasma Engineering Research Laboratory

DTIC Science & Technology

2015-12-01

Wang, W. Zheng, and Y. N. Wang, "Optical study of radicals (OH, O, H, N) in a needle-plate negative pulsed streamer corona discharge ," Plasma...needle- plate bi-directional pulsed corona discharge ," European Physical Journal D, vol. 38, pp. 515-522, Jun 2006. 155 [35] W. Wang, S. Wang...F. Liu, W. Zheng, and D. Wang, "Optical study of OH radical in a wire-plate pulsed corona discharge ," Spectrochimica Acta Part A: Molecular and

Progress in Frictional Drag Reduction Summer 1971 to Summer 1972

DTIC Science & Technology

1973-01-01

directed at achieving •nprovey sea wnd Air ii .- wa for•ted in March 1967 by merging the David Taylor Madei Basin at CizIeniAir, ’ýplr/t]La with ihe...means. Greskovich and Shrier (50) show that polymers also provide drag reduction in two-phase systems such as gas-liquid systems. Medical applications...May 1971). 50. Greskovich, E. J. and A. J. Shrier , "Drag Reduction in Two- Phase Flows," Industrial and Engineering Chemistry (Fundamentals), Vol. 10

USSR and Eastern Europe Scientific Abstracts, Engineering and Equipment, Number 39

DTIC Science & Technology

1978-01-30

34 ’\\ v i \\ • . .1 DISTRIBUTION STATEMENT A Approved for Public Release Distribution Unlimited •’••*^.:- v ;;;.-’.i^ 20000405 198 U. S...1034 manuscript received 22 Feb 77 GOLUBINSKIY, A . I., and GOLYBKIN, V . N., Central Aerohydrodynamic Institute imeni N. Ye. Zhukovskiy [Abstract] A ...Russian Vol 232 No 3, 1977 pp 538-541 manuscript received 23 Apr 76 ZHEVNIN, A . A ., and T0L0KN0V, V . I., Moscow Higher Technical School imeni N. E

Combat Engineers of World War II: Lessons on training and Mobilization

DTIC Science & Technology

2014-06-13

Arms Research Library Digital Library, 142- 143 . 18Blanche D. Coll, Jean E. Keith, and Herbert H. Rosenthal, eds., The United States Army in World...defense of Luzon and Corregidor. While discussing his plan with Major General Richard K . Sutherland, Chief of Staff, USAFFE, in Casey’s office, MacArthur...75Ibid., 208. 76Ibid., 208-209. 77Ibid., 143 . 78Ibid. 79Ibid. 80Casey, 221. 43 81Ibid. 82Ibid. 83Ibid., 221-222. 84Meidling, vol. 2

Initial Fire Suppression Reactions of Halons Phase 1. Development of Experimental Approach

DTIC Science & Technology

1990-09-01

Engineering News, pp. 22-46, August 31, 1987. Mitani, T., " Flame Retardant Effects of CF 3Br and NaHCO 3 Combustion and Flame , Vol. 50, pp. 177-188, 1983...occurring when halons enter flame fronts are unclear. It is these initial reactions, however, that determine differences in halon performance, the effect of...LABORATORY FLAMES Over the past four decades, numerous tests have been performed in an effort to characterize the relative effectiveness of candidate

Reliability Parts Derating Guidelines

DTIC Science & Technology

1982-06-01

226-30, October 1974. 66 I, 26. "Reliability of GAAS Injection Lasers", De Loach , B. C., Jr., 1973 IEEE/OSA Conference on Laser Engineering and...Vol. R-23, No. 4, 226-30, October 1974. 28. "Reliability of GAAS Injection Lasers", De Loach , B. C., Jr., 1973 IEEE/OSA Conference on Laser...opnatien ot 󈨊 deg C, mounted on a 4-inach square 0.250~ inch thick al~loy alum~nusi panel.. This mounting technique should be L~ ken into cunoidur~tiou

Modeling Platform Dynamics and Physiological Response to Short Arm Centrifugation

DTIC Science & Technology

1994-03-01

the "venous pump." There is no provision for such a muscular pumping action in the current version of the model, thus this effect is not apparent in...VCt; Dick, DE. Difference-Differential Equations for Fluid Flow in Distensible Tubes. IEEE Trans. Bio-Med. Engr. 14(4): 171-177; 1967. 29. Snyder, MF...Flow in Distensible Tube. IEEE Transactions on efo-Nedical C... Engineering. Vol WNE-14, NO. 3, pp 1M1-177. Jut 1967. C... C... Re - 1*SmCPtl(Sepi

AISI/DOE Advanced Process Control Program Vol. 3 of 6 Microstructure Engineering in Hot Strip Mills, Part 1 of 2: Integrated Mathematical Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.K. Brimacombe; I.V. Samarasekera; E.B. Hawbolt

1999-07-31

This report describes the work of developing an integrated model used to predict the thermal history, deformation, roll forces, microstructural evolution and mechanical properties of steel strip in a hot-strip mill. This achievement results from a joint research effort that is part of the American Iron and Steel Institute's (AIS) Advanced Process Control Program, a collaboration between the U.S. DOE and fifteen North American Steelmakers.

Critical Behavior of Transport and Mechanical Properties in Particulate Dispersions and Granular Media

DTIC Science & Technology

1988-07-29

ORGANIZATION 6b. OFFICE SYMBOL 7a. NAME OF MONITORING ORGANIZATION University of Southern 1 (i aplicable ) It California I J R 6c. ADDRESS (City, State...Materials Based on the Theory of "Compound Mobilized Planes" (CMP) and "Spatial Mobilized Planes" (SMP), in Vol. II of Advances in the Mechanics and the Flow...of Disordered and Reinforced Materials", M. S. Thesis , M. D. Stephens, Department of Chemical Engineering, May 1988, , 13 UNIVERSITY OF SOUTHERN

Environmentally Assisted Cracking of High Strength Beta Titanium Alloys

DTIC Science & Technology

1993-11-01

financially supported by the Virginia Center for Innovative Technology TDC on Electrochemical Science and Engineering (Grant CIT- TDC -88-01) and by the Office...Material Behayir, N.R. Moody and A.W. Thompson, eds., TMS -AIME, Warrendale, PA, p. 891(1990). 18. 0. Vosikovsky, J.Tt. EyaL, Vol. 6, p. 175 (1978). 19...acknowledged. 3 23 REFERENCES 1. Beta Titanium Alloys in the 80’s R.R. Boyer and H.W. Rosenberg, eds., TMS -AIME,3 Warrendale, PA. pp. 209-229, 1983. 2

Urban archaeology: new perspectives and possibilities

NASA Astrophysics Data System (ADS)

Leucci, Giovanni; De Giorgi, Lara; Persico, Raffaele

2017-04-01

The study of ancient remains is more difficult in urban environments than in an archaeological site, because the ancient town and the modern one superpose to each other and precious testimonies are present just under the current irremovable roads and the buildings. However, modern techniques allows to investigate the past under the present, and allows to retrieve information and possibly create a fruition of the ancient site. IBAM-CNR has been engaged for years in this kind of problems, making use of GPR, ERT and other geophysical techniques [1-3], virtual reality [4] and minimally invasive diagnostics [5] in several towns, in particular in southern Italy and Sicily. The valorization of sites in urban areas require precise projects, founding and clear ideas and agreements about the management of the cultural heritage, because only in this case the work performed will be really exploited and enjoyed by specialists and common people. At the conference, some examples will be shown regarding monuments in the town of Lecce, Italy. References [1] M. Pieraccini, L. Noferini, D. Mecatti, C. Atzeni, R. Persico, F. Soldovieri, Advanced Processing Techniques for Step-frequency Continuous-Wave Penetrating Radar: the Case Study of "Palazzo Vecchio" Walls (Firenze, Italy), Research on Nondestructive Evaluation, vol. 17, pp. 71-83, 2006. [2] Masini N, Persico R., Rizzo E, Calia A, Giannotta M. T., Quarta G., Pagliuca A., "Integrated Techniques for Analysis and Monitoring of Historical Monuments: the case of S.Giovanni al Sepolcro in Brindisi (Southern Italy)." Near Surface Geophysics, vol. 8, n. 5, pp. 423-432, 2010. [3] G. Leucci, N. Masini, R. Persico, F. Soldovieri." GPR and sonic tomography for structural restoration : the case of the Cathedral of Tricarico", Journal of Geophysics and Engineering, vol. 8, pp. S76-S92, Aug. 2011. [4] F. Gabellone, G. Leucci, N. Masini, R. Persico, G. Quarta, F. Grasso, "Nondestructive Prospecting and virtual reconstruction of the chapel of the Holy Spirit in Lecce, Italy", Near Surface Geophysics, vol. 11, n. 2, pp. 231-238, April 2013. [5] L. Matera, R. Persico, N. Bianco, G. Lepozzi and G. Leopizzi, Joined interpretation of Buried Anomalies from Ground Penetrating Radar data and endoscopic tests, Archaeological prospection, vol. 23, n. 4, pp. 301-309, 2016.

Pertinent Factors that Affect the Representation of Women and Minorities in Scientific, Engineering, and Technical Careers

DTIC Science & Technology

1990-07-01

Upon the Supply of Minority and Women Scientists, Engineers , and Technologists (SETs) for Defense Industries and Installations." The purpose of the...the causes of the underrepresentation of minorities and women in scientific, engineering , and technolog- ical (SET) careers, and to establish a...DT ?copy- ARI Research Note 90-80 AD-A231 827 Pertinent Factors that Affect the Representation of Women and Minorities in Scientific, Engineering

40 CFR 1065.602 - Statistics.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS ENGINE-TESTING... number of degrees of freedom, ν, as follows, noting that the εi are the errors (e.g., differences... a gas concentration is measured continuously from the raw exhaust of an engine, its flow-weighted...

1. CHANNEL DIMENSIONS AND ALIGNMENT RESEARCH INSTRUMENTATION. ENGINEERING TECHNICIAN WITH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. CHANNEL DIMENSIONS AND ALIGNMENT RESEARCH INSTRUMENTATION. ENGINEERING TECHNICIAN WITH VIDEO-CONTROLED MODEL BOAT IN MODEL NAVIGATION CHANNEL. NOTE CONTROL TRAILER IN BACKGROUND. - Waterways Experiment Station, Hydraulics Laboratory, Halls Ferry Road, 2 miles south of I-20, Vicksburg, Warren County, MS

First-Hand Experience with Engineering Design and Career Interest in Engineering: An Informal STEM Education Case Study

ERIC Educational Resources Information Center

Ayar, Mehmet C.

2015-01-01

The purpose of this study is to present students' experiences, interest in engineering, and personal narratives while participating in a robotics summer camp in a metropolitan city in Turkey. In this study, I used qualitative data collection methods such as interviews, field notes, and observations. I used the four principles of Engle and Conant…

A&M. Jet engine test building (TAN609). Exterior. Equipment inside rollup ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

A&M. Jet engine test building (TAN-609). Exterior. Equipment inside roll-up door is blowdown test facility, part of loft-semiscale program. Note width of central section serving as blast protection for operator on left side. Photographer: Cahoon. Date: July 22, 1965. INEEL negative no. 65-3703 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

40 CFR Appendix III to Part 600 - Sample Fuel Economy Label Calculation

Code of Federal Regulations, 2011 CFR

2011-07-01

... miles per gallon. Note that the car line of the test vehicle using a given engine makes no difference... engine. These four car lines are: Ajax Boredom III Dodo Castor (Station Wagon) A. A car line is defined... different car line than the normal Castor car line made up of sedans, coupes, etc. B. The engine considered...

40 CFR Appendix III to Part 600 - Sample Fuel Economy Label Calculation

Code of Federal Regulations, 2014 CFR

2014-07-01

... miles per gallon. Note that the car line of the test vehicle using a given engine makes no difference... engine. These four car lines are: Ajax Boredom III Dodo Castor (Station Wagon) A. A car line is defined... different car line than the normal Castor car line made up of sedans, coupes, etc. B. The engine considered...

40 CFR Appendix III to Part 600 - Sample Fuel Economy Label Calculation

Code of Federal Regulations, 2013 CFR

2013-07-01

... miles per gallon. Note that the car line of the test vehicle using a given engine makes no difference... engine. These four car lines are: Ajax Boredom III Dodo Castor (Station Wagon) A. A car line is defined... different car line than the normal Castor car line made up of sedans, coupes, etc. B. The engine considered...

40 CFR Appendix III to Part 600 - Sample Fuel Economy Label Calculation

Code of Federal Regulations, 2012 CFR

2012-07-01

... miles per gallon. Note that the car line of the test vehicle using a given engine makes no difference... engine. These four car lines are: Ajax Boredom III Dodo Castor (Station Wagon) A. A car line is defined... different car line than the normal Castor car line made up of sedans, coupes, etc. B. The engine considered...

28. PUMP/ENGINE ROOM OFF THE BASEMENT OF MILL NO. 1. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

28. PUMP/ENGINE ROOM OFF THE BASEMENT OF MILL NO. 1. ENGINE PLATFORM IS SEEN BEHIND PUMP. THIS AMERICAN MOISTURE CO. PUMP WAS USED TO HUMIDIFY UPPER FLOORS OF MILL. NOTE TANK TO LEFT, UNKNOWN USE. NOTHING IN THIS ROOM HAS BEEN USED SINCE 1945. - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

Concepts of Mathematics for Students of Physics and Engineering: A Dictionary

NASA Technical Reports Server (NTRS)

Kolecki, Joseph C.

2003-01-01

A physicist with an engineering background, the author presents a mathematical dictionary containing material encountered over many years of study and professional work at NASA. This work is a compilation of the author's experience and progress in the field of study represented and consists of personal notes and observations that can be used by students in physics and engineering.

Flammability limits of lithium-ion battery thermal runaway vent gas in air and the inerting effects of halon 1301

NASA Astrophysics Data System (ADS)

Karp, Matthew Eugene

Lithium-ion (rechargeable) and lithium-metal (non-rechargeable) battery cells put aircraft at risk of igniting and fueling fires. Lithium batteries can be packed in bulk and shipped in the cargo holds of freighter aircraft; currently lithium batteries are banned from bulk shipment on passenger aircraft [1]. The federally regulated Class C cargo compartment extinguishing system's utilization of a 5 %vol Halon 1301 knockdown concentration and a sustained 3 %vol Halon 1301 may not be sufficient at inerting lithium-ion battery vent gas and air mixtures [2]. At 5 %vol Halon 1301 the flammability limits of lithium-ion premixed battery vent gas (Li-Ion pBVG) in air range from 13.80 %vol to 26.07 %vol Li-Ion pBVG. Testing suggests that 8.59 %vol Halon 1301 is required to render all ratios of the Li-Ion pBVG in air inert. The lower flammability limit (LFL) and upper flammability limit (UFL) of hydrogen and air mixtures are 4.95 %vol and 76.52 %vol hydrogen, respectively. With the addition of 10 %vol and 20 %vol Halon 1301 the LFL is 9.02 %vol and 11.55 %vol hydrogen, respectively, and the UFL is 45.70 %vol and 28.39 %vol hydrogen, respectively. The minimum inerting concentration (MIC) of Halon 1301 in hydrogen and air mixtures is 26.72 %vol Halon 1301 at 16.2 %vol hydrogen. The LFL and UFL of Li-Ion pBVG and air mixtures are 7.88 %vol and 37.14 %vol Li-Ion pBVG, respectively. With the addition of 5 %vol, 7 %vol, and 8 %vol Halon 1301 the LFL is 13.80 %vol, 16.15 %vol, and 17.62 % vol Li-Ion pBVG, respectively, and the UFL is 26.07 %vol, 23.31 %vol, and 21.84 %vol Li- Ion pBVG, respectively. The MIC of Halon 1301 in Li-Ion pBVG and air mixtures is 8.59 %vol Halon 1301 at 19.52 %vol Li-Ion pBVG. Le Chatelier's mixing rule has been shown to be an effective measure for estimating the flammability limits of Li-Ion pBVGes. The LFL has a 1.79 % difference while the UFL has a 4.53 % difference. The state of charge (SOC) affects the flammability limits in an apparent parabolic manner, where the widest flammability limits are at or near 100 % SOC. [1] IATA. Lithium Battery Guidance Document. 7 Jan. 2016. Guidance for complying with provisions applicable to the transport by air of lithium batteries as set out in the 57th Edition of the IATA Dangerous Goods Regulations (DGR). [2] Webster, Harry. Flammability assessment of bulk-packed, rechargeable lithium-ion cells in transport category aircraft. Office of Aviation Research, Federal Aviation Administration, 2006.

Applied Fluid Mechanics. Lecture Notes.

ERIC Educational Resources Information Center

Gregg, Newton D.

This set of lecture notes is used as a supplemental text for the teaching of fluid dynamics, as one component of a thermodynamics course for engineering technologists. The major text for the course covered basic fluids concepts such as pressure, mass flow, and specific weight. The objective of this document was to present additional fluids…

ADM. Change House (TAN606) as completed. Camera facing northerly. Note ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ADM. Change House (TAN-606) as completed. Camera facing northerly. Note proximity to shielding berm. Part of hot shop (A&M Building, TAN-607) at left of view beyond berm. Date: October 29, 1954. INEEL negative no. 12705 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

ARC-1969-A-9175

NASA Image and Video Library

1946-01-10

Crash of Douglas XSB2D-1 (Bu. No. 03552) airplane in a Sunnyvale , CA prune orchard caused by engine failure. Note the spectator crawling into the rear cockpit to remove the clock . Note: Used in publication Flight Research at Ames; 57 Years of Development and Validation of Aeronautical Technology NASA SP-1998-3300 fig.19

The Early Years: Documenting Discoveries

ERIC Educational Resources Information Center

Ashbrook, Peggy

2015-01-01

By observing an organism over time, children can identify patterns in their observations, note growth or other changes, learn about the needs of the organism, and see how the organism creates the next generation of its species; all of these skills are science and engineering practices noted in "A Framework for K-12 Science Education"…

Moral Fantasy in Genetic Engineering.

ERIC Educational Resources Information Center

Boone, C. Keith

1984-01-01

Discusses the main ethical issues generated by the new genetics and suggests ways to think about them. Concerns include "playing God," violation of the natural order of the universe, and abuse of genetic technology. Critical distinctions for making difficult decisions about genetic engineering issues are noted. (DH)

40 CFR 1065.602 - Statistics.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS ENGINE-TESTING... number of degrees of freedom, ν, as follows, noting that the εi are the errors (e.g., differences... measured continuously from the raw exhaust of an engine, its flow-weighted mean concentration is the sum of...

40 CFR 1065.602 - Statistics.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS ENGINE-TESTING... number of degrees of freedom, ν, as follows, noting that the εi are the errors (e.g., differences... measured continuously from the raw exhaust of an engine, its flow-weighted mean concentration is the sum of...

40 CFR 1068.501 - How do I report emission-related defects?

Code of Federal Regulations, 2011 CFR

2011-07-01

...) AIR POLLUTION CONTROLS GENERAL COMPLIANCE PROVISIONS FOR ENGINE PROGRAMS Reporting Defects and... components or systems containing the following components: (i) Electronic control units, aftertreatment... control information labels. Note however, that § 1068.101(a)(1) prohibits the sale of engines/equipment...

Carbon Fibers with Controlled Surface Chemistry

DTIC Science & Technology

1992-04-15

1991 Approved for Public Release; Distribution is Unlimited. Prepared for PDA ENGINEERING 2975 Redhill Avenue Costa Mesa, CA 92626 93-2 51’M 505...SPONSORING/ MONITORING AGENCY REPORT NUMBER PDA ENGINEERING 2975 Redhill Avenue Costa Mesa, CA 92626 11. SUPPLEMENTARY NOTES TPL, Inc. 3754 Hawkins, NE

Mechanical Design of Spacecraft

NASA Technical Reports Server (NTRS)

1962-01-01

In the spring of 1962, engineers from the Engineering Mechanics Division of the Jet Propulsion Laboratory gave a series of lectures on spacecraft design at the Engineering Design seminars conducted at the California Institute of Technology. Several of these lectures were subsequently given at Stanford University as part of the Space Technology seminar series sponsored by the Department of Aeronautics and Astronautics. Presented here are notes taken from these lectures. The lectures were conceived with the intent of providing the audience with a glimpse of the activities of a few mechanical engineers who are involved in designing, building, and testing spacecraft. Engineering courses generally consist of heavily idealized problems in order to allow the more efficient teaching of mathematical technique. Students, therefore, receive a somewhat limited exposure to actual engineering problems, which are typified by more unknowns than equations. For this reason it was considered valuable to demonstrate some of the problems faced by spacecraft designers, the processes used to arrive at solutions, and the interactions between the engineer and the remainder of the organization in which he is constrained to operate. These lecture notes are not so much a compilation of sophisticated techniques of analysis as they are a collection of examples of spacecraft hardware and associated problems. They will be of interest not so much to the experienced spacecraft designer as to those who wonder what part the mechanical engineer plays in an effort such as the exploration of space.

Experiment on the Effects of Storage Duration of Biodiesel produced from Crude Palm Oil, Waste Cooking oil and Jatropha

NASA Astrophysics Data System (ADS)

Nanihar, Nadiarulah; Khalid, Amir; Mustaffa, Norrizal; Jaat, Norrizam; Sapit, Azwan; Razali, Azahari; Sunar, Norshuhaila Mohamed

2017-10-01

Biodiesel based on vegetable oil is an alternative that had various advantage in term of sustainability and environmental attractive compare to others conventional diesel. Biodiesel is product of any fat or oil that derived from any organic sources through a refinery process called transesterification process. This research investigates the effects of storage duration and variant ambient condition on the biodiesel properties and characteristics. In this study, there are three types of blending which is 5vol% blends ( 5vol% plant oil 95vol% diesel), 10vol% blending (10vol% plant oil and 90vol% diesel) and 15vol% blending (15vol% plant oil and 85vol% diesel) each called CPO5 (crude palm oil 5vol%), CPO10 (crude palm oil 10vol%),CPO15 (crude palm oil 15vol%), JO5 (jatropha oil 5vol%), JO10 (jatropha oil 10vol%),and JO15 (jatropha oil 15vol%) respectively. Biodiesel samples were stored at indoor condition and outdoor condition for a 3 months period. The fuel properties such as acid value, viscosity, density, water content and flash point are observed with the laboratory instrument. Flash point value and water content increased under both of indoor and outdoor condition and a steady data for viscosity and density. However, acid value at indoor condition nearly constant but increased dramatically for outdoor condition over the time.

Systems Engineering and Integration as a Foundation for Mission Engineering

DTIC Science & Technology

2015-09-01

parallels the INCOSE definition to develop a system, it is important to note the focus on a complete life cycle balanced solution and the satisfaction of...unacceptable to relevant stakeholders. Principle 7 Managers should acknowledge the potential conflicts between (a) their own role as corporate...engineer in understanding the relationships between various needs and to identify similarities, differences, or redundancies. Another method for

Gas-heat-pump development

NASA Astrophysics Data System (ADS)

Creswick, F. A.

Incentives for the development of gas heat pumps are discussed. Technical progress made on several promising technologies was reviewed. The status of development of gas-engine-driven heat pumps, the absorption cycle for the near- and long-term gas heat pump systems, the Stirling engine, the small Rankine-cycle engines, and gas-turbine-driven heat pump systems were briefly reviewed. Progress in the US, Japan, and Europe is noted.

Regional CMS Modeling: Southwest Florida Gulf Coast

DTIC Science & Technology

2016-05-01

by Kelly R. Legault and Tanya M. Beck PURPOSE: This Coastal and Hydraulics Engineering technical note (CHETN) describes a regional application of...the U.S. Army Corps of Engineers (USACE) Engineer Research and Development Center (ERDC) Coastal Modeling System (CMS). This application spans three...Active federal projects include the Pinellas County Shore Protection Project (SPP), Tampa Harbor Deeping Project, Manatee County SPP at Anna Maria

TRUSS DETAILS. United Engineering Company Ltd., Alameda Shipyard. Includes crane ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

TRUSS DETAILS. United Engineering Company Ltd., Alameda Shipyard. Includes crane girder section. No architect noted. Drawn by Penney. Plan no. 2-N-7. March 10, 1942, no revisions. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76, item no. 22A. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Warehouse, 2900 Main Street, Alameda, Alameda County, CA

Using iPad-Based Mobile Learning to Teach Creative Engineering within a Problem-Based Learning Pedagogy

ERIC Educational Resources Information Center

Li, Yulong; Wang, Lixun

2018-01-01

This case study, noting the increasing interest in iPad-based mobile learning research and aware of the current dearth of engineering talent in the UK, aims to contribute to a still sparse area of research that links iPad use to engineering education. To achieve this, the study investigates the integration of iPad-based mobile learning…

Systems Engineering of Electric and Hybrid Vehicles

NASA Technical Reports Server (NTRS)

Kurtz, D. W.; Levin, R. R.

1986-01-01

Technical paper notes systems engineering principles applied to development of electric and hybrid vehicles such that system performance requirements support overall program goal of reduced petroleum consumption. Paper discusses iterative design approach dictated by systems analyses. In addition to obvious peformance parameters of range, acceleration rate, and energy consumption, systems engineering also considers such major factors as cost, safety, reliability, comfort, necessary supporting infrastructure, and availability of materials.

Data and Analysis Center for Software: An IAC in Transition.

DTIC Science & Technology

1983-06-01

reviewed and is approved for publication. * APPROVEDt Proj ect Engineer . JOHN J. MARCINIAK, Colonel, USAF Chief, Command and Control Division . FOR THE CO...SUPPLEMENTARY NOTES RADC Project Engineer : John Palaimo (COEE) It. KEY WORDS (Conilnuo n rever*e aide if necessary and identify by block numober...Software Engineering Software Technology Information Analysis Center Database Scientific and Technical Information 20. ABSTRACT (Continue on reverse side It

33 CFR 276.6 - General policy.

Code of Federal Regulations, 2011 CFR

2011-07-01

... specifications for the work they propose to undertake. However, those non-Federal engineering costs and overhead... commenced after certification shall be eligible for certification except for local engineering work noted...; certification of the proposal will be in the general public interest. (d) Costs assigned to that part of the...

USAF bioenvironmental noise data handbook. Volume 172: Hush-noise suppressor (Aero Systems Engineering, Incorporated) far-field noise

NASA Astrophysics Data System (ADS)

Lee, R. A.; Rau, T. H.; Jones, C.

1982-07-01

The hush-house noise suppressor was made by Aero Systems Engineering of Texas, Inc. for acoustical suppression of various AF fighter/trainer aircraft during ground runup operations. This report provides measured and extrapolated data defining the bioacoustic environments produced by several aircraft/engines operating in the hush-house suppressor for various engine power configurations. Far-field data measured at 20 locations are normalized to standard meteorological conditions and extrapolated from 75-8000 meters to derive sets of equal-value contours for seven acoustic measures as function of angle and distance from the source. Refer to Volume 1 of this handbook, 'USAF Bioenvironmental Noise Data Handbook, Vol 1: Organization, Content and Application,' AMRL-TR-75(1) 1975, for discussion of the objective and design of the handbook, the types of data presented, measurement procedures, instrumentation, data processing, definitions of quantities, symbols, equations, applications, limitations, etc. Data are presented for the following aircraft/engines operating in the hush-house noise suppressor: F-4, F-15, F-16, F-105, F-106, F-111F and T-38 aircraft and the TF41-A-1, J79-GE-15, F100-PW-100, J75-P19, J-75-P-17 and TF30-P-100 engines.

28 CFR Appendix A to Part 35 - Guidance to Revisions to ADA Regulation on Nondiscrimination on the Basis of Disability in State...

Code of Federal Regulations, 2013 CFR

2013-07-01

... communicated effectively using handwritten notes. One major advocacy organization, for example, noted that the... example, blood work for routine lab tests or regular allergy shots. Video Interpreting Services... or combustion engines. One commenter suggested using exhaust level as the determinant. Although there...

28 CFR Appendix A to Part 35 - Guidance to Revisions to ADA Regulation on Nondiscrimination on the Basis of Disability in State...

Code of Federal Regulations, 2011 CFR

2011-07-01

... communicated effectively using handwritten notes. One major advocacy organization, for example, noted that the... example, blood work for routine lab tests or regular allergy shots. Video Interpreting Services... or combustion engines. One commenter suggested using exhaust level as the determinant. Although there...

28 CFR Appendix A to Part 35 - Guidance to Revisions to ADA Regulation on Nondiscrimination on the Basis of Disability in State...

Code of Federal Regulations, 2012 CFR

2012-07-01

... communicated effectively using handwritten notes. One major advocacy organization, for example, noted that the... example, blood work for routine lab tests or regular allergy shots. Video Interpreting Services... or combustion engines. One commenter suggested using exhaust level as the determinant. Although there...

28 CFR Appendix A to Part 35 - Guidance to Revisions to ADA Regulation on Nondiscrimination on the Basis of Disability in State...

Code of Federal Regulations, 2014 CFR

2014-07-01

... communicated effectively using handwritten notes. One major advocacy organization, for example, noted that the... example, blood work for routine lab tests or regular allergy shots. Video Interpreting Services... or combustion engines. One commenter suggested using exhaust level as the determinant. Although there...

Dynamics of two-strain influenza model with cross-immunity and no quarantine class.

PubMed

Chung, K W; Lui, Roger

2016-12-01

The question about whether a periodic solution can exists for a given epidemiological model is a complicated one and has a long history (Hethcote and Levin, Applied math. ecology, biomathematics, vol 18. Springer, Berlin, pp 193-211, 1989). For influenza models, it is well known that a periodic solution can exists for a single-strain model with periodic contact rate (Aron and Schwartz, J Math Biol 110:665-679, 1984; Kuznetsov and Piccardi, J Math Biol 32:109-121, 1994), or a multiple-strain model with cross-immunity and quarantine class or age-structure (Nuño et al., Mathematical epidemiology. Lecture notes in mathematics, vol 1945. Springer, Berlin, 2008, chapter 13). In this paper, we prove the local asymptotic stability of the interior steady-state of a two-strain influenza model with sufficiently close cross-immunity and no quarantine class or age-structure. We also show that if the cross-immunity between two strains are far apart; then it is possible for the interior steady-state to lose its stability and bifurcation of periodic solutions can occur. Our results extend those obtained by Nuño et.al. (SIAM J Appl Math 65:964-982, 2005). This problem is important because understanding the reasons behind periodic outbreaks of seasonal flu is an important issue in public health.

D0 Solenoid Upgrade Project: Pressure Ratings for Some Chimney and Control Dewar Componenets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rucinski, R.; /Fermilab

1993-05-25

Pressure rating calculations were done for some of the chimney and control dewar components. This engineering note documents these calculations. The table below summarizes the components looked at, and what pressure rating are. The raw engineering calculations for each of the components is given.

Signal Collection Processing Enhancements

DTIC Science & Technology

2004-04-01

APPROVED: /s/ ALFREDO VEGA IRIZARRY Project Engineer FOR THE DIRECTOR: /s/ JOSEPH CAMERA, Chief...SPONSORING / MONITORING AGENCY REPORT NUMBER AFRL-IF-RS-TR-2004-108 11. SUPPLEMENTARY NOTES AFRL Project Engineer: Alfredo Vega Irizzary...Mercury representative, Emilio Velilla, suggested several actions to better diagnose the problem. Both boards were moved to different PCI slots. The

40 CFR 86.1542 - Information required.

Code of Federal Regulations, 2011 CFR

2011-07-01

... required: (1) Date and time of day. (2) Test number. (3) Engine intake air or test cell temperature. (4) Barometric pressure. Note: A central laboratory barometer may be used: Provided, That individual test cell... location. (5) Engine intake or test cell and CVS dilution air humidity. (6) Curb idle speed during the test...

40 CFR 86.1542 - Information required.

Code of Federal Regulations, 2012 CFR

2012-07-01

... required: (1) Date and time of day. (2) Test number. (3) Engine intake air or test cell temperature. (4) Barometric pressure. Note: A central laboratory barometer may be used: Provided, That individual test cell... location. (5) Engine intake or test cell and CVS dilution air humidity. (6) Curb idle speed during the test...

Measurement. Teacher's Guide. Small Engine Repair Series.

ERIC Educational Resources Information Center

East Texas State Univ., Commerce. Occupational Curriculum Lab.

This teacher's guide is part of an instructional series on small engine repair that is intended for use with mentally retarded and learning disabled students in general mechanical repair programs. Notes to the instructor cover equipment needed, preparation before teaching, and use of evaluation charts, transparency masters, audiovisual(s), and…

Development status of the Vulcain engine

NASA Astrophysics Data System (ADS)

Gastal, J.; Eury, S.; Borromee, J.; Micewicz, J. B.

1993-06-01

The present account of the current status of the Ariane V launch vehicle's Vulcain first-stage cryofueled bipropellant engine gives attention to the Vulcain's overall configuration, as well as to its component designs, operational flowcharts, turbopump and combustion chamber performance verification trials, and program management responsibilities. Prospective development efforts currently envisioned are noted.

Corporate Consolidation: An Event Study of Historic Stock Prices in the Defense Aerospace Industry

DTIC Science & Technology

2009-12-01

1994 Raytheon Xyplex Inc 1/3/1995 Boeing Precision Gear 4/3/1995 Raytheon Raytheon E-Systems Inc 6/30/1995 Raytheon Litwin Engineers & Construction...Acquirer 6/30/1995 Litwin Engineers & Construction Raytheon Arithmetic Return Logarithmic Return Note: * is significant at the 5% level 90

Installation, maintenance and operating manual for the Lucas-type fuel injection system of the 3 B rotary engine

NASA Technical Reports Server (NTRS)

1985-01-01

The installation procedure, maintenance, adjustment and operation of a Lucas type fuel injection system for 13B rotary racing engine is outlined. Components of the fuel injection system and installation procedure and notes are described. Maintenance, adjustment, and operation are discussed.

Incorporating Disciplinary Literacy in Technology and Engineering Education

ERIC Educational Resources Information Center

Loveland, Thomas

2014-01-01

This article presents an overview of how to relate reading to a content area, specifically technology education. The author notes that, with the new focus on Common Core English Language Arts State Standards and state-developed standards, technology and engineering teachers should include disciplinary literacy in their curriculum. Academic…

Multiscale plant wakes, turbulence and non linear scaling flexible effects

NASA Astrophysics Data System (ADS)

Vila, Teresa; Redondo, Jose M.; Velasco, David

2010-05-01

We present velocity ADV measurements and flow visualization of the turbulent wakes behind plant arrays, as these are often fractal in nature, we compare the multifractal spectra and the turbulence structure behind the wakes. Both statistical measures allowing to calculate integral lengthscales and their profiles modified by the plant cannopies [1,2] as well as intermittency and spectral behaviour are also measured [3,4]. We distinguish several momentum transfer mechanisms between the cannopy and the flow, an internal one where lateral turbulent tensions are dominant, and another one just above the plant average height dominated by vertical Reynolds stresses. Visualization of flow over individual plant models show the role of coherent vortices triggered by plant elasticity. The deformation rate of the plants and their Youngs modulus may be correlated with overal plant drag and geometry. This is modified strongly in fractal canopies. Large turbulent integral scales are linked to rugosity and the scaling of the waves.[5,6] Pearlescence experiments where local shear is visualized and numerical simulations of Fractal grids are compared following [7]. [1] Nepf,H.M. Drag, turbulence and diffusion in flow through emergent vegetation. Water Resources Res. 35(2)(1999) [2] Ben Mahjoub,O., Redondo J.M. and Babiano A. Jour.Structure functions in complex flows. Flow Turbulence and Combustion 59, 299-313. [3] El-Hakim, O. Salama, M. Velocity distribution inside and above branched flexible roughness. ASCE Journal of Irrigation and Drainage Engineering, Vol. 118, No 6, (November/December 1992) 914-927. [4] Finnigan,J. Turbulence in plant canopies. Annu. Rev. Fluid Mech. 2000 , Vol. 32: 519-571. [5] Ikeda, S., Kanazawa, M. Three- dimensional organized vortices above flexible water plants. ASCE Journal of Hydraulic Engineering, Vol. 122, No 11, (1996) 634-640. [6] Velasco, D.,Bateman A.,Redondo J.M and Medina V. An open channel flow experimental and theorical study of resistance and turbulent characterization over flexible vegetated linnings. Flow, Turbulence and Combustion. 70, 69-88. [7] Layzet S. Vassilicos C. Vila T and Redondo J.M. I.O.P Fractal grids and wakes, Proceedings on Earth sciences (2009)

Correlation tests of the engine performance parameter by using the detrended cross-correlation coefficient

NASA Astrophysics Data System (ADS)

Dong, Keqiang; Gao, You; Jing, Liming

2015-02-01

The presence of cross-correlation in complex systems has long been noted and studied in a broad range of physical applications. We here focus on an aero-engine system as an example of a complex system. By applying the detrended cross-correlation (DCCA) coefficient method to aero-engine time series, we investigate the effects of the data length and the time scale on the detrended cross-correlation coefficients ρ DCCA ( T, s). We then show, for a twin-engine aircraft, that the engine fuel flow time series derived from the left engine and the right engine exhibit much stronger cross-correlations than the engine exhaust-gas temperature series derived from the left engine and the right engine do.

Fuel film thickness measurements using refractive index matching in a stratified-charge SI engine operated on E30 and alkylate fuels

NASA Astrophysics Data System (ADS)

Ding, Carl-Philipp; Sjöberg, Magnus; Vuilleumier, David; Reuss, David L.; He, Xu; Böhm, Benjamin

2018-03-01

This study shows fuel film measurements in a spark-ignited direct injection engine using refractive index matching (RIM). The RIM technique is applied to measure the fuel impingement of a high research octane number gasoline fuel with 30 vol% ethanol content at two intake pressures and coolant temperatures. Measurements are conducted for an alkylate fuel at one operating case, as well. It is shown that the fuel volume on the piston surface increases for lower intake pressure and lower coolant temperature and that the alkylate fuel shows very little spray impingement. The fuel films can be linked to increased soot emissions. A detailed description of the calibration technique is provided and measurement uncertainties are discussed. The dependency of the RIM signal on refractive index changes is measured. The RIM technique provides quantitative film thickness measurements up to 0.9 µm in this engine. For thicker films, semi-quantitative results of film thickness can be utilized to study the distribution of impinged fuel.

Integrating Requirements Engineering, Modeling, and Verification Technologies into Software and Systems Engineering

DTIC Science & Technology

2007-10-28

Software Engineering, FASE󈧉, volume 3442 of Lecture Notes in Computer Science, pages 175--189. Springer, 2005. Andreas Bauer, Martin Leucker, and Jonathan ...of Personnel receiving masters degrees NAME Markus Strohmeier Gerrit Hanselmann Jonathan Streit Ernst Sassen 4Total Number: Names of personnel...developed and documented mainly within the master thesis by Jonathan Streit [Str06]: • Jonathan Streit. Development of a programming language like tem

14. DREDGING MAP. United Engineering Company Ltd., Alameda Shipyard. Ship ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. DREDGING MAP. United Engineering Company Ltd., Alameda Shipyard. Ship repair facilities dredging map. No architect noted. Drawn by "J.H." (John Hudspeth?). Sheet 1. Plan no. 10,529. Scale one inch to 50 feet. September 22, 1943. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 18, 1943. blueprint - United Engineering Company Shipyard, 2900 Main Street, Alameda, Alameda County, CA

ALTERATIONS AND ADDITIONS TO THE GATE HOUSE, United Engineering Company ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ALTERATIONS AND ADDITIONS TO THE GATE HOUSE, United Engineering Company Ltd., Alameda Shipyard. Plan, elevations, and details of expanded structure. No architect noted. Drawn by "J.B.H." (John Hudspeth?). Sheet 2 of 2. Plan no. 10,504. Scale 1/4 inch to the foot. November 28, 1942, last revised 5/5/45. pencil on vellum - United Engineering Company Shipyard, Gate House, 2900 Main Street, Alameda, Alameda County, CA

Effects of Heat of Vaporization and Octane Sensitivity on Knock-Limited Spark Ignition Engine Performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ratcliff, Matthew A; Burton, Jonathan L; Sindler, Petr

Knock-limited loads for a set of surrogate gasolines all having nominal 100 research octane number (RON), approximately 11 octane sensitivity (S), and a heat of vaporization (HOV) range of 390 to 595 kJ/kg at 25 degrees C were investigated. A single-cylinder spark-ignition engine derived from a General Motors Ecotec direct injection (DI) engine was used to perform load sweeps at a fixed intake air temperature (IAT) of 50 degrees C, as well as knock-limited load measurements across a range of IATs up to 90 degrees C. Both DI and pre-vaporized fuel (supplied by a fuel injector mounted far upstream ofmore » the intake valves and heated intake runner walls) experiments were performed to separate the chemical and thermal effects of the fuels' knock resistance. The DI load sweeps at 50 degrees C intake air temperature showed no effect of HOV on the knock-limited performance. The data suggest that HOV acts as a thermal contributor to S under the conditions studied. Measurement of knock-limited loads from the IAT sweeps for DI at late combustion phasing showed that a 40 vol% ethanol (E40) blend provided additional knock resistance at the highest temperatures, compared to a 20 vol% ethanol blend and hydrocarbon fuel with similar RON and S. Using the pre-vaporized fuel system, all the high S fuels produced nearly identical knock-limited loads at each temperature across the range of IATs studied. For these fuels RON ranged from 99.2 to 101.1 and S ranged from 9.4 to 12.2, with E40 having the lowest RON and highest S. The higher knock-limited loads for E40 at the highest IATs examined were consistent with the slightly higher S for this fuel, and the lower engine operating condition K values arising from use of this fuel. The study highlights how fuel HOV can affect the temperature at intake valve closing, and consequently the pressure-temperature history of the end gas leading to more negative values of K, thereby enhancing the effect of S on knock resistance.« less

Multivariate Analysis, Retrieval, and Storage System (MARS). Volume 6: MARS System - A Sample Problem (Gross Weight of Subsonic Transports)

NASA Technical Reports Server (NTRS)

Hague, D. S.; Woodbury, N. W.

1975-01-01

The Mars system is a tool for rapid prediction of aircraft or engine characteristics based on correlation-regression analysis of past designs stored in the data bases. An example of output obtained from the MARS system, which involves derivation of an expression for gross weight of subsonic transport aircraft in terms of nine independent variables is given. The need is illustrated for careful selection of correlation variables and for continual review of the resulting estimation equations. For Vol. 1, see N76-10089.

The Science of and Advanced Technology for Cost-Effective Manufacture of High Precision Engineering Products. Volume 4. Thermal Effects on the Accuracy of Numerically Controlled Machine Tools.

DTIC Science & Technology

1985-10-01

83K0385 FINAL REPORT D Vol. 4 00 THERMAL EFFECTS ON THE ACCURACY OF LD NUME" 1ICALLY CONTROLLED MACHINE TOOLS PREPARED BY I Raghunath Venugopal and M...OF NUMERICALLY CONTROLLED MACHINE TOOLS 12 PERSONAL AJ’HOR(S) Venunorial, Raghunath and M. M. Barash 13a TYPE OF REPORT 13b TIME COVERED 14 DATE OF...TOOLS Prepared by Raghunath Venugopal and M. M. Barash Accesion For Unannounced 0 Justification ........................................... October 1085

Investigation of Hot Streak Migration and Film Cooling Effects on the Heat Transfer in Rotor/Stator Interacting Flows.

DTIC Science & Technology

1991-07-15

Study of Endwall and Airfoil Surface Heat Transfer in a Large Scale Turbine Blade Cascade," Journal of Engineering for Power, Vol. 102, No. 2, April...the turbine passage and along the surface of where d6 is the distance from the blade surface to a given node, the airfoil . In addition, a specified...effects on the passage flow and blade surface heat transfer for an axial flow turbine stage. These objectives are part of an overall plan to extend the

AGARD Flight Test Instrumentation Series. Volume 1, Issue 2. Basic Principles of Flight Test Instrumentation Engineering (Introduction Generale aux Principles de Base de l’Instrumentation des Essais en Vol)

DTIC Science & Technology

1994-03-01

evaluation of its anticipated value. If the program can be accomplished using conventional techniques , this should be seriously considered. Development or...the direct frequency generating principles such as, pulse tachos, turbine flowmeters, and encoders, also Doppler and laser techniques used for...CERAMIC BLOCK Figure 5.3. The basic concepts of the laser ring gyro (LRG). The principle depends upon the guidance of two beams of laser light around an

Literature Review of the State of the Art for Graphical User Interfaces (GUI) for a Series of Oil Quality Monitoring Sensors for Shipboard Equipment

DTIC Science & Technology

2011-03-01

sensors, the hardware may impose amplification and filtering on the input signal prior to the A/D conversion process. The third component in the...Assessment by FTIR – A Case Study on HEMM in Indian Mines”, Industrial Lubrication and Tribology , Vol. 152, pp. 61-66, 2000. [7] KarisAllen, K.J...and Engine Oil Condition”, Industrial Lubrication and Tribology , April 2005. [16] Jakoby, B., Eisenschmid, H., Schatz, O., “On-Board Evaluation of

A Parametric Analysis of Duels.

DTIC Science & Technology

1984-03-01

represent the numeric value of the newly filled-in terms within boxes A, B, C, and D for a particular matrix this duel becomes what is called a two-by-two...1979 (ReprInted lAasrii Seoely of Naval Enginears, Navel Engineers from Journal Cluaoical Phuye. 70(12). 15 Jun 1979). Jawuei. Vol. 90. Net. 6, be 2979...34Selective Service and the All-Volunteer AC A123 658 Force.* 23 pp.. Her 1IM. AC A113 0960P 6 PP 347 Quanbeck, David B.. " MethdS tar Uenereting Aircraft

Closeup oblique view of the aft fuselage of the Orbiter ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Close-up oblique view of the aft fuselage of the Orbiter Discovery looking forward and port as the last Space Shuttle Main Engine is being removed, it can be seen on the left side of the image frame. Note that one of the Orbiter Maneuvering System/ Reaction Control System has been removed while one of them remains. Also note that the body flap, below the engine positions has a protective covering to prevent damage to the High-temperature Reusable Surface Insulation tiles. This image was taken inside the Orbiter Processing Facility at Kennedy Space Center. - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

Closeup oblique view of the aft fuselage of the Orbiter ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Close-up oblique view of the aft fuselage of the Orbiter Discovery looking forward and starboard as the last Space Shuttle Main Engine is being removed, it can be seen on the right side of the image frame. Note that one of the Orbiter Maneuvering System/ Reaction Control System has been removed while one of them remains. Also note that the body flap, below the engine positions has a protective covering to prevent damage to the High-temperature Reusable Surface Insulation tiles. This image was taken inside the Orbiter Processing Facility at Kennedy Space Center. - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

HOT CELL BUILDING, TRA632, INTERIOR. HOT CELL NO. 1 (THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

HOT CELL BUILDING, TRA-632, INTERIOR. HOT CELL NO. 1 (THE FIRST BUILT) IN LABORATORY 101. CAMERA FACES SOUTHEAST. SHIELDED OPERATING WINDOWS ARE ON LEFT (NORTH) SIDE. OBSERVATION WINDOW IS AT LEFT OF VIEW (ON WEST SIDE). PLASTIC COVERS SHROUD MASTER/SLAVE MANIPULATORS AT WINDOWS IN LEFT OF VIEW. NOTE MINERAL OIL RESERVOIR ABOVE "CELL 1" SIGN, INDICATING LEVEL OF THE FLUID INSIDE THE THICK WINDOWS. HOT CELL HAS BEVELED CORNER BECAUSE A SQUARED CORNER WOULD HAVE SUPPLIED UNNECESSARY SHIELDING. NOTE PUMICE BLOCK WALL AT LEFT OF VIEW. INL NEGATIVE NO. HD46-28-1. Mike Crane, Photographer, 2/2005 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kennedy, R.P.; Kincaid, R.H.; Short, S.A.

This report presents the results of part of a two-task study on the engineering characterization of earthquake ground motion for nuclear power plant design. Task I of the study, which is presented in NUREG/CR-3805, Vol. 1, developed a basis for selecting design response spectra taking into account the characteristics of free-field ground motion found to be significant in causing structural damage. Task II incorporates additional considerations of effects of spatial variations of ground motions and soil-structure interaction on foundation motions and structural response. The results of Task II are presented in four parts: (1) effects of ground motion characteristics onmore » structural response of a typical PWR reactor building with localized nonlinearities and soil-structure interaction effects; (2) empirical data on spatial variations of earthquake ground motion; (3) soil-structure interaction effects on structural response; and (4) summary of conclusions and recommendations based on Tasks I and II studies. This report presents the results of the first part of Task II. The results of the other parts will be presented in NUREG/CR-3805, Vols. 3 to 5.« less

New Analysis Methods Estimate a Critical Property of Ethanol Fuel Blends

DOE Office of Scientific and Technical Information (OSTI.GOV)

2016-03-01

To date there have been no adequate methods for measuring the heat of vaporization of complex mixtures. This research developed two separate methods for measuring this key property of ethanol and gasoline blends, including the ability to estimate heat of vaporization at multiple temperatures. Methods for determining heat of vaporization of gasoline-ethanol blends by calculation from a compositional analysis and by direct calorimetric measurement were developed. Direct measurement produced values for pure compounds in good agreement with literature. A range of hydrocarbon gasolines were shown to have heat of vaporization of 325 kJ/kg to 375 kJ/kg. The effect of addingmore » ethanol at 10 vol percent to 50 vol percent was significantly larger than the variation between hydrocarbon gasolines (E50 blends at 650 kJ/kg to 700 kJ/kg). The development of these new and accurate methods allows researchers to begin to both quantify the effect of fuel evaporative cooling on knock resistance, and exploit this effect for combustion of hydrocarbon-ethanol fuel blends in high-efficiency SI engines.« less

Variation of photoautotrophic fatty acid production from a highly CO2 tolerant alga, Chlorococcum littorale, with inorganic carbon over narrow ranges of pH.

PubMed

Ota, Masaki; Takenaka, Motohiro; Sato, Yoshiyuki; Smith, Richard L; Inomata, Hiroshi

2015-01-01

Photoautotrophic fatty acid production of a highly CO2 -tolerant green alga Chlorococcum littorale in the presence of inorganic carbon at 295 K and light intensity of 170 µmol-photon m(-2) s(-1) was investigated. CO2 concentration in the bubbling gas was adjusted by mixing pure gas components of CO2 and N2 to avoid photorespiration and β-oxidation of fatty acids under O2 surrounding conditions. Maximum content of total fatty acid showed pH-dependence after nitrate depletion of the culture media and increased with the corresponding inorganic carbon ratio. Namely, [HCO3 (-) ]/([CO2 ]+n[ CO32-]) ratio in the culture media was found to be a controlling factor for photoautotrophic fatty acid production after the nitrate limitation. At a CO2 concentration of 5% (vol/vol) and a pH of 6.7, the fatty acid content was 47.8 wt % (dry basis) at its maximum that is comparable with land plant seed oils. © 2015 American Institute of Chemical Engineers.

MoSi2-Base Hybrid Composite Passed Engine Test

NASA Technical Reports Server (NTRS)

Keith, Theo G., Jr.; Hebsur, Mohan

1998-01-01

The intermetallics compound molybdenum disilicide (MoSi2) is an attractive high-temperature structural material for advanced engine applications. It has excellent oxidation resistance, a high melting point, relatively low density, and high thermal conductivity, and it is easily machined. Past research'at the NASA Lewis Research Center has resulted in the development of a hybrid composite consisting of a MoSi2 matrix reinforced with silicon nitride (Si3N4) Particulate and silicon carbide (SiC) fibers. This composite has demonstrated attractive strength, toughness, thermal fatigue, and oxidation resistance, including resistance to "pest" oxidation. These properties attracted the interest of the Office of Naval Research and Pratt & Whitney, and a joint NASA/Navy/Pratt & Whitney effort was developed to continue to mature the MoSi2 Composite technology. A turbine blade outer air seal, which was part of the Integrated High Performance Turbine Engine Technology (IHPTET) program, was chosen as a first component on which to focus. The first tasks of the materials development effort were to develop improved processing methods to reduce costs and to use fine-diameter fibers that enable the manufacturing of complex shapes. Tape-casting methods were developed to fully infiltrate the fine SiC fibers with matrix powders. The resulting composites were hot pressed to 100-percent density. Composites with cross-plied fiber architectures with 30 vol. % hi-nicalon SiC fibers and 30 vol. % nitride particles are now made routinely and demonstrate a good balance of properties. The next task entailed the measurement of a wide variety of mechanical properties to confirm the suitability of this composite in engines. In particular, participants in this effort demonstrated that composites made with Hi-Nicalon fibers had strength and toughness properties equal to or better than those of the composites made with the large-diameter fibers that had been used previously. Another critically important property measured was impact resistance. Aircraft engine components require sufficient toughness to resist manufacturing defects, assembly damage, stress concentrations at notches, and foreign object damage. Engine company designers indicated that impact resistance would have to be measured before they would seriously consider these types of composites. The Charpy V-notch test was chosen to assess impact resistance, and both monolithic and composite versions Of MOSi2 were tested from -300 to 1400 C. The results (see the following graphs) show that nitride-particulate-reinforced MoSi2 exhibited impact resistance higher than that of many monolithic ceramics and intermetallics, and that the fiber-reinforced composites had even higher values, approaching that of cast superalloys.

An Enabling Technology for New Planning and Scheduling Paradigms

NASA Technical Reports Server (NTRS)

Jaap, John; Davis, Elizabeth

2004-01-01

The Night Projects Directorate at NASA's Marshall Space Flight Center is developing a new planning and scheduling environment and a new scheduling algorithm to enable a paradigm shift in planning and scheduling concepts. Over the past 33 years Marshall has developed and evolved a paradigm for generating payload timelines for Skylab, Spacelab, various other Shuttle payloads, and the International Space Station. The current paradigm starts by collecting the requirements, called ?ask models," from the scientists and technologists for the tasks that are to be scheduled. Because of shortcomings in the current modeling schema, some requirements are entered as notes. Next, a cadre with knowledge of vehicle and hardware modifies these models to encompass and be compatible with the hardware model; again, notes are added when the modeling schema does not provide a better way to represent the requirements. Finally, the models are modified to be compatible with the scheduling engine. Then the models are submitted to the scheduling engine for automatic scheduling or, when requirements are expressed in notes, the timeline is built manually. A future paradigm would provide a scheduling engine that accepts separate science models and hardware models. The modeling schema would have the capability to represent all the requirements without resorting to notes. Furthermore, the scheduling engine would not require that the models be modified to account for the capabilities (limitations) of the scheduling engine. The enabling technology under development at Marshall has three major components: (1) A new modeling schema allows expressing all the requirements of the tasks without resorting to notes or awkward contrivances. The chosen modeling schema is both maximally expressive and easy to use. It utilizes graphical methods to show hierarchies of task constraints and networks of temporal relationships. (2) A new scheduling algorithm automatically schedules the models without the intervention of a scheduling expert. The algorithm is tuned for the constraint hierarchies and the complex temporal relationships provided by the modeling schema. It has an extensive search algorithm that can exploit timing flexibilities and constraint and relationship options. (3) An innovative architecture allows multiple remote users to simultaneously model science and technology requirements and other users to model vehicle and hardware characteristics. The architecture allows the remote users to submit scheduling requests directly to the scheduling engine and immediately see the results. These three components are integrated so that science and technology experts with no knowledge of the vehicle or hardware subsystems and no knowledge of the internal workings of the scheduling engine have the ability to build and submit scheduling requests and see the results. The immediate feedback will hone the users' modeling skills and ultimately enable them to produce the desired timeline. This paper summarizes the three components of the enabling technology and describes how this technology would make a new paradigm possible.

Enabling a New Planning and Scheduling Paradigm

NASA Technical Reports Server (NTRS)

Jaap, John; Davis, Elizabeth

2004-01-01

The Flight Projects Directorate at NASA's Marshall Space Flight Center is developing a new planning and scheduling environment and a new scheduling algorithm to enable a paradigm shift in planning and scheduling concepts. Over the past 33 years Marshall has developed and evolved a paradigm for generating payload timelines for Skylab, Spacelab, various other Shuttle payloads, and the International Space Station. The current paradigm starts by collecting the requirements, called "tasks models," from the scientists and technologists for the tasks that they want to be done. Because of shortcomings in the current modeling schema, some requirements are entered as notes. Next a cadre with knowledge of vehicle and hardware modifies these models to encompass and be compatible with the hardware model; again, notes are added when the modeling schema does not provide a better way to represent the requirements. Finally, another cadre further modifies the models to be compatible with the scheduling engine. This last cadre also submits the models to the scheduling engine or builds the timeline manually to accommodate requirements that are expressed in notes. A future paradigm would provide a scheduling engine that accepts separate science models and hardware models. The modeling schema would have the capability to represent all the requirements without resorting to notes. Furthermore, the scheduling engine would not require that the models be modified to account for the capabilities (limitations) of the scheduling engine. The enabling technology under development at Marshall has three major components. (1) A new modeling schema allows expressing all the requirements of the tasks without resorting to notes or awkward contrivances. The chosen modeling schema is both maximally expressive and easy to use. It utilizes graphics methods to show hierarchies of task constraints and networks of temporal relationships. (2) A new scheduling algorithm automatically schedules the models without the intervention of a scheduling expert. The algorithm is tuned for the constraint hierarchies and the complex temporal relationships provided by the modeling schema. It has an extensive search algorithm which can exploit timing flexibilities and constraint and relationship options. (3) A web-based architecture allows multiple remote users to simultaneously model science and technology requirements and other users to model vehicle and hardware characteristics. The architecture allows the users to submit scheduling requests directly to the scheduling engine and immediately see the results. These three components are integrated so that science and technology experts with no knowledge of the vehicle or hardware subsystems and no knowledge of the internal workings of the scheduling engine have the ability to build and submit scheduling requests and see the results. The immediate feedback will hone the users' modeling skills and ultimately enable them to produce the desired timeline. This paper summarizes the three components of the enabling technology and describes how this technology would make a new paradigm possible.

Fault detection and accommodation testing on an F100 engine in an F-15 airplane. [digital engine control system

NASA Technical Reports Server (NTRS)

Myers, L. P.; Baer-Riedhart, J. L.; Maxwell, M. D.

1985-01-01

The fault detection and accommodation (FDA) methods that can be used for digital engine control systems are presently subjected to a flight test program in the case of the F-15 fighter's F100 engine electronic controls, inducing selected faults and then evaluating the resulting digital engine control responses. In general, flight test results were found to compare well with both ground tests and predictions. It is noted that the inducement of dual-pressure failures was not feasible, since FDA logic was not designed to accommodate them.

SOUTH WING, MTR661. INTERIOR DETAIL INSIDE LAB ROOM 131. CAMERA ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

SOUTH WING, MTR-661. INTERIOR DETAIL INSIDE LAB ROOM 131. CAMERA FACING NORTHEAST. NOTE CONCRETE BLOCK WALLS. SAFETY SHOWER AND EYE WASHER AT REAR WALL. INL NEGATIVE NO. HD46-7-2. Mike Crane, Photographer, 2/2005. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Troubleshooting. Teacher's Guide and Student Activity Sheets. Small Engine Repair Series.

ERIC Educational Resources Information Center

Hill, Pamela

This teacher's guide is part of an instructional series on small engine repair that is intended for use with mentally retarded and learning disabled students in general mechanical repair programs. Notes to the instructor cover equipment needed, preparation before teaching, and use of evaluation charts, transparency masters, audiovisual(s), and…

Engineering Encounters: Building Technological Literacy with Philosophy and Nature of Technology

ERIC Educational Resources Information Center

Kruse, Jerrid; Wilcox, Jesse

2017-01-01

This column presents ideas and techniques to enhance your science teaching. In this issue the authors discuss a design project they have used with upper elementary students (grades 4-6). They note ways to engage students in thinking philosophically about technology to meet engineering design outcomes in the "Next Generation Science…

STEEL BEAMS FOR FIRST FLOOR BEING READIED FOR CONCRETE POUR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

STEEL BEAMS FOR FIRST FLOOR BEING READIED FOR CONCRETE POUR UNDER WEATHER SHELTER DURING COLD WINTER. NOTE ABUNDANCE OF BEAMS; THE FLOOR WILL SUPPORT HEAVY LOADS. INL NEGATIVE NO. 1175. Unknown Photographer, 12/20/1950 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

2. CHANNEL DIMENSIONS AND ALIGNMENT RESEARCH INSTRUMENTATION. HYDRAULIC ENGINEER PILOTING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. CHANNEL DIMENSIONS AND ALIGNMENT RESEARCH INSTRUMENTATION. HYDRAULIC ENGINEER PILOTING VIDEO-CONTROLED BOAT MODEL FROM CONTROL TRAILER. NOTE VIEW FROM BOAT-MOUNTED VIDEO CAMERA SHOWN ON MONITOR, AND MODEL WATERWAY VISIBLE THROUGH WINDOW AT LEFT. - Waterways Experiment Station, Hydraulics Laboratory, Halls Ferry Road, 2 miles south of I-20, Vicksburg, Warren County, MS

Notes on Advanced Engineering Education

ERIC Educational Resources Information Center

Klimenko, A. Y.

2017-01-01

This article reviews history, analyses principles and presents a modern interpretation of advanced engineering education (AEE). AEE originated in France, was adapted in Germany and reached its zenith in the second half of the twentieth century as part of technological efforts induced by the space race. AEE is an enhanced form of education aimed at…

Engineering Education in Russia in an Era of Changes

ERIC Educational Resources Information Center

Lukianenko, M. V.; Polezhaev, O. A.; Churliaeva, N. P.

2013-01-01

Engineering education in Russia is undergoing reforms, but the history of this form of higher education does not indicate that it will succeed in bringing it into line with current world standards, or even making it more able to contribute at a high level to Russian economic growth. (Contains 5 notes.)

Hatteras Breach, North Carolina

DTIC Science & Technology

2010-07-01

1400 EST. Cross channel ADCP transects were also made from an instrumented Zodiac inflatable boat on 16, 17, and 24 October. The ADCP employed for...of the breach, near the middle, and on the sound side (Figure 11). The Zodiac crabbed (at an angle to the cur- rent) across the breach at a best...Coastal and Hydraulics Engineering Technical Note (CHETN) is intended to document the rapid response of the U.S. Army Corps of Engineers to engineer and

European Science Notes. Volume 40, Number 3.

DTIC Science & Technology

1986-03-01

to protein structures analysis and the UK Institute in Protein Engineering are discussed. Material 9ciences 9cole des Mine de Paris--France’s Premier...ellipsometry and for network analysis tation a.v.); (4) development of a meth- based on a microcomputer. A current R&D od for the rapid production of monoclon...Engineering, Cornell University, Ithaca, New York. Structure Analysis in Protein Engineering, K.M. Ulmer, University of Maryland, Adelphi, Maryland

Field Tests of a Laser Raman Measurement System for Aircraft Engine Exhaust Emissions

DTIC Science & Technology

1974-10-01

apparatus underwent significant changes as the final engineering design evolved. Section Ill describes the tests which were conducted with the...2- I , U~ - - SECTION II EXPERIMENTAL APPARATUS As noted in the Introduction to this report, the conceptual design of the experimental laser Raman...overlap in the measurement volume of Interest, The details Wf thisl opýýlp &I engineering design trod@. off have been proviouuly replorted toy Munrio

ARC-1969-A-16591

NASA Image and Video Library

1951-10-24

Flight evaluation and comparison of a NACA submerged inlet and a scoop inlet on the North American YF-93A (AF48-317 NACA-139). The YF-93A's were the first aircraft to use flush NACA engine inlets. aircraft to use flush NACA engine inlets. Note: Used in publication in Flight Research at Ames; 57 Years of Development and Validation of Aeronautical Technology NASA SP-1998-3300 and Memoirs of a Flight Test Engineer NASA SP-2001-4525

Assessment of commercial NLP engines for medication information extraction from dictated clinical notes.

PubMed

Jagannathan, V; Mullett, Charles J; Arbogast, James G; Halbritter, Kevin A; Yellapragada, Deepthi; Regulapati, Sushmitha; Bandaru, Pavani

2009-04-01

We assessed the current state of commercial natural language processing (NLP) engines for their ability to extract medication information from textual clinical documents. Two thousand de-identified discharge summaries and family practice notes were submitted to four commercial NLP engines with the request to extract all medication information. The four sets of returned results were combined to create a comparison standard which was validated against a manual, physician-derived gold standard created from a subset of 100 reports. Once validated, the individual vendor results for medication names, strengths, route, and frequency were compared against this automated standard with precision, recall, and F measures calculated. Compared with the manual, physician-derived gold standard, the automated standard was successful at accurately capturing medication names (F measure=93.2%), but performed less well with strength (85.3%) and route (80.3%), and relatively poorly with dosing frequency (48.3%). Moderate variability was seen in the strengths of the four vendors. The vendors performed better with the structured discharge summaries than with the clinic notes in an analysis comparing the two document types. Although automated extraction may serve as the foundation for a manual review process, it is not ready to automate medication lists without human intervention.

Flight Experience, Risk Taking, and Hazardous Attitudes in Glider Instructors (Experience de vol, Prise de Risque et Attitudes Dangereuses des Instructeurs de vol sur Planeur)

DTIC Science & Technology

2010-11-01

sur planeur . On a également examiné le rôle que jouent l’expérience de vol et la propension à prendre des risques dans le but d’anticiper les...données transversales, obtenues par l’observation de 144 instructeurs de vol sur planeur , en activité ou non, œuvrant dans cinq centres de vol à...137 Sommaire ..... Expérience de vol, prise de risque et attitudes dangereuses des instructeurs de vol sur planeur Ann-Renee Blais

US Army Corps of Engineers Section 404: permitting of valley fills - red flag or red tape?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas R. Johnston, Jr.

2009-03-15

Since 2001 the US Army Corps of Engineers has been permitting most surface coal mines as Individual Permits rather than Nationwide Permits under the Section 404 program. This was shown in a survey by Skelly & Loy of permits published by Huntingdon Crops District and the state of Kentucky. Nationwide Permit 21 (NWP21) authorises the filling of waters of the United States associated with surface coal mining and reclamation operations already authorised or currently being processed as part of the integrated permit processing procedure. NWP21 has received much opposition and two noticeable court cases involving it, in West Virginia andmore » Kentucy, are briefly reported. The article first appeared in Skelly & Loy's newsletter, Portal to the mining industry, Vol II, Issue 1. 4 photos.« less

Advances in cryogenic engineering. Vols. 35A & 35B - Proceedings of the 1989 Cryogenic Engineering Conference, University of California, Los Angeles, July 24-28, 1989

NASA Astrophysics Data System (ADS)

Fast, R. W.

The book presents a review of literature on superfluid helium, together with papers under the topics on heat and mass transfer in He II; applications of He II for cooling superconducting devices in space; heat transfer to liquid helium and liquid nitrogen; multilayer insulation; applications of superconductivity, including topics on magnets and other devices, magnet stability and coil protection, and cryogenic techniques; and refrigeration for electronics. Other topics discussed include refrigeration of superconducting systems; the expanders, cold compressors, and pumps for liquid helium; dilution refrigerators; magnetic refrigerators; pulse tube refrigerators; cryocoolers for space applications; properties of cryogenic fluids; cryogenic instrumentation; hyperconducting devices (cryogenic magnets); cryogenic applications in space science and technology and in transportation; and miscellaneous cryogenic techniques and applications.

Simulating Radar Signals for Detection Performance Evaluation.

DTIC Science & Technology

1981-02-01

defined by g = e-(aO/e 3dB) 2 (70) where a = 1.6651 and 0 3dB Is the one-way half-power heamwidth, we note that from (60) and (68) a=( 03dB) 2 , ( 71 ...8217erform;ice of Some Nonparametric Rank Tests and an Alpplication to Radar," JEEE ’’ra.. Information Theory , Vol. IT-16, pp 309- 318 (c!;pecjally Section...V1 1 1 C . fl I V IC ’A It N FI (.LLTrif -I~d P’LE (,%I I CiRCS-SE CT IC& AREA C vu I$1 i rKI I %1 : 111. C I -PjI Ik ~I G%ft- 71 -Y: I I LAl. I J10F

Asymmetric skew Bessel processes and their applications to finance

NASA Astrophysics Data System (ADS)

Decamps, Marc; Goovaerts, Marc; Schoutens, Wim

2006-02-01

In this paper, we extend the Harrison and Shepp's construction of the skew Brownian motion (1981) and we obtain a diffusion similar to the two-dimensional Bessel process with speed and scale densities discontinuous at one point. Natural generalizations to multi-dimensional and fractional order Bessel processes are then discussed as well as invariance properties. We call this family of diffusions asymmetric skew Bessel processes in opposition to skew Bessel processes as defined in Barlow et al. [On Walsh's Brownian motions, Seminaire de Probabilities XXIII, Lecture Notes in Mathematics, vol. 1372, Springer, Berlin, New York, 1989, pp. 275-293]. We present factorizations involving (asymmetric skew) Bessel processes with random time. Finally, applications to the valuation of perpetuities and Asian options are proposed.

On a Steel Horse I Ride: A History of the MH-53 Pave Low Helicopters in War and Peace

DTIC Science & Technology

2012-09-01

themselves were revolutionary combinations of new, more powerful turbine engines with rotary- wing aircraft to produce vastly increased lifting power...expected potential, and the USMC purchased only 55 of the originally intended order of 180 aircraft.8 As turbine engines were refined and came into more...general use, production companies began to match them to helicopters. Manu- facturers immediately noted that turbines created more lift per engine

From Rhetoric to Reality: Case Studies of Two Fifth Grade Science Teachers to Inform Reform

ERIC Educational Resources Information Center

Maynard, Kathie Jo

2013-01-01

The purpose of this qualitative study was to explore two elementary teachers' implementation of engineering design over two academic years and to describe how their teaching practice changed over the two instructional cycles. This study used field notes and audio transcripts of the teachers during their engineering design teaching, written…

40 CFR 1054.501 - How do I run a valid emission test?

Code of Federal Regulations, 2014 CFR

2014-07-01

... accumulation, use the test fuel or any commercially available fuel that is representative of the fuel that in-use engines will use. Note that § 1054.145(n) allows for testing with gasoline test fuels specified by... fuel system representing a production configuration that sends fuel vapors to the test engine's intake...

An Archeological Overview and Management Plan for the Tarheel Army Missile Plant Alamance County, North Carolina.

DTIC Science & Technology

1984-05-21

factory planning engineer, noted that bedrock lies about 22 feet be- low the surface in the eastern portion of the main plant area, but had not...Carolina Press. Lee, James B. 1983. Personal communication. Factory Planning Engineer, Western Electric Company, Tarheel Army Missile Plant. Lefl1cr, Hugh

REACTOR SERVICE BUILDING, TRA635. CROWDED MOCKUP AREA. CAMERA FACES EAST. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

REACTOR SERVICE BUILDING, TRA-635. CROWDED MOCK-UP AREA. CAMERA FACES EAST. PHOTOGRAPHER'S NOTE SAYS "PICTURE REQUESTED BY IDO IN SUPPORT OF FY '58 BUILDING PROJECTS." INL NEGATIVE NO. 56-3025. R.G. Larsen, Photographer, 9/13/1956 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

HORIZONTAL BEAM HOLE NO. 3. PLUG AND RADIATION DOOR HAVE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

HORIZONTAL BEAM HOLE NO. 3. PLUG AND RADIATION DOOR HAVE BEEN REMOVED. EXPERIMENTAL APPARATUS WAS INSERTED INTO THE HOLE. NOTE VALVE CUBICLES NEAR FLOOR ON EACH SIDE OF HB-3. INL NEGATIVE NO. 3471. Unknown Photographer, 10/12/1951 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

FAST CHOPPER BUILDING, TRA665. DETAIL SHOWS UPPER AND LOWER LEVEL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

FAST CHOPPER BUILDING, TRA-665. DETAIL SHOWS UPPER AND LOWER LEVEL WALLS OF DIFFERING MATERIALS. NOTE DOORWAY TO MTR TO RIGHT OF CHOPPER BUILDING'S CLIPPED CORNER. CAMERA FACING WEST. INL NEGATIVE NO. HD42-1. Mike Crane, Photographer, 3/2004 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Design Fixation and Cooperative Learning in Elementary Engineering Design Project: A Case Study

ERIC Educational Resources Information Center

Luo, Yi

2015-01-01

This paper presents a case study examining 3rd, 4th and 5th graders' design fixation and cooperative learning in an engineering design project. A mixed methods instrument, the Cooperative Learning Observation Protocol (CLOP), was adapted to record frequency and class observation on cooperative learning engagement through detailed field notes.…

DEMINERALIZER BUILDING, TRA608. CAMERA IS ON RAW WATER TOWER AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DEMINERALIZER BUILDING, TRA-608. CAMERA IS ON RAW WATER TOWER AND FACES WEST. STEAM PLANT, TRA-609, AT UPPER EDGE OF VIEW. ABSENCE OF ROOF EXPOSES FIVE-BAY STRUCTURE AND INTERIOR DIVISION OF SPACE. CORRIDOR AT WEST END OF BUILDING WILL SEPARATE LABORATORY AND OFFICE SPACE FROM POTABLE WATER TANKS. ALONG NORTH WALL ARE SPACES FOR CATION AND ANION EXCHANGE UNITS. PENTHOUSE WILL ENCLOSE DEGASSIFIER. TANK AT LEFT (SOUTH) OF BUILDING STORES DEMINERALIZED WATER. NOTE BRINE STORAGE PIT, TRA-631, AT RIGHT OF VIEW, ABOVE PAIR OF CAUSTIC STORAGE TANKS. NOTE TRENCHES FOR BURIED WATER PIPES. INL NEGATIVE NO. 2732. Unknown Photographer, 6/29/1951 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Paired peer learning through engineering education outreach

NASA Astrophysics Data System (ADS)

Fogg-Rogers, Laura; Lewis, Fay; Edmonds, Juliet

2017-01-01

Undergraduate education incorporating active learning and vicarious experience through education outreach presents a critical opportunity to influence future engineering teaching and practice capabilities. Engineering education outreach activities have been shown to have multiple benefits; increasing interest and engagement with science and engineering for school children, providing teachers with expert contributions to engineering subject knowledge, and developing professional generic skills for engineers such as communication and teamwork. This pilot intervention paired 10 pre-service teachers and 11 student engineers to enact engineering outreach in primary schools, reaching 269 children. A longitudinal mixed methods design was employed to measure change in attitudes and Education Outreach Self-Efficacy in student engineers; alongside attitudes, Teaching Engineering Self-Efficacy and Engineering Subject Knowledge Confidence in pre-service teachers. Highly significant improvements were noted in the pre-service teachers' confidence and self-efficacy, while both the teachers and engineers qualitatively described benefits arising from the paired peer mentor model.

39. REBUILT ENGINES AND WINDING MACHINERY: Photocopy of December 1906 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

39. REBUILT ENGINES AND WINDING MACHINERY: Photocopy of December 1906 photograph of the steam engines and winding machinery at the Washington and Mason Street powerhouse. View towards west. United Railroads of San Francisco rebuilt the damaged engines and winders shown in CA-12-60 and CA-12-61. There are no cables strung over the winders in this photograph, indicating that the firm had yet to resume service. Note the rough shed erected over the engines to protect them from weather while work continued on the reconstruction of the powerhouse. - San Francisco Cable Railway, Washington & Mason Streets, San Francisco, San Francisco County, CA

A quantitative method for estimating dermal benzene absorption from benzene-containing hydrocarbon liquids.

PubMed

Petty, Stephen E; Nicas, Mark; Boiarski, Anthony A

2011-01-01

This study examines a method for estimating the dermal absorption of benzene contained in hydrocarbon liquids that contact the skin. This method applies to crude oil, gasoline, organic solvents, penetrants, and oils. The flux of benzene through occluded skin as a function of the percent vol/vol benzene in the liquid is derived by fitting a curve to experimental data; the function is supralinear at benzene concentrations < or = 5% vol/vol. When a liquid other than pure benzene is on nonoccluded skin, benzene may preferentially evaporate from the liquid, which thereby decreases the benzene flux. We present a time-averaging method here for estimating the reduced dermal flux during evaporation. Example calculations are presented for benzene at 2% vol/vol in gasoline, and for benzene at 0.1% vol/vol in a less volatile liquid. We also discuss other factors affecting dermal absorption.

Blood Program in World War II. Medical Department, United States Army

DTIC Science & Technology

1964-01-01

Branch Lieutenant Colonel JEROME RUDBERG, MSC, USA, Chief, Information Activities Branch RODERICK M. ENGERT, Chief, General Reference and Research... Activities of Medical Consultants Vol. II. Infectious Diseases Preventive Medicine in World War II: Vol. II. Environmental Hygiene Vol. III. Personal...Other Than Malaria Vr VIII Surgery in World War II: Activities of Surgical Consultants, vol. I Activities of Surgical Consultants, vol. II General

On Some Algebraic and Combinatorial Properties of Dunkl Elements

NASA Astrophysics Data System (ADS)

Kirillov, Anatol N.

2013-06-01

We introduce and study a certain class of nonhomogeneous quadratic algebras together with the special set of mutually commuting elements inside of each, the so-called Dunkl elements. We describe relations among the Dunkl elements. This result is a further generalization of similar results obtained in [S. Fomin and A. N. Kirillov, Quadratic algebras, Dunkl elements and Schubert calculus, in Advances in Geometry (eds. J.-S. Brylinski, V. Nistor, B. Tsygan and P. Xu), Progress in Math. Vol. 172 (Birkhäuser Boston, Boston, 1995), pp. 147-182, A. Postnikov, On a quantum version of Pieri's formula, in Advances in Geometry (eds. J.-S. Brylinski, R. Brylinski, V. Nistor, B. Tsygan and P. Xu), Progress in Math. Vol. 172 (Birkhäuser Boston, 1995), pp. 371-383 and A. N. Kirillov and T. Maenor, A Note on Quantum K-Theory of Flag Varieties, preprint]. As an application we describe explicitly the set of relations among the Gaudin elements in the group ring of the symmetric group, cf. [E. Mukhin, V. Tarasov and A. Varchenko, Bethe Subalgebras of the Group Algebra of the Symmetric Group, preprint arXiv:1004.4248]. Also we describe a few combinatorial properties of some special elements in the associative quasi-classical Yang-Baxter algebra in a connection with the values of the β-Grothendieck polynomials for some special permutations, and on the other hand, with the Ehrhart polynomial of the Chan-Robbins polytope.

On Some Algebraic and Combinatorial Properties of Dunkl Elements

NASA Astrophysics Data System (ADS)

Kirillov, Anatol N.

2012-11-01

We introduce and study a certain class of nonhomogeneous quadratic algebras together with the special set of mutually commuting elements inside of each, the so-called Dunkl elements. We describe relations among the Dunkl elements. This result is a further generalization of similar results obtained in [S. Fomin and A. N. Kirillov, Quadratic algebras, Dunkl elements and Schubert calculus, in Advances in Geometry (eds. J.-S. Brylinski, V. Nistor, B. Tsygan and P. Xu), Progress in Math. Vol. 172 (Birkhäuser Boston, Boston, 1995), pp. 147-182, A. Postnikov, On a quantum version of Pieri's formula, in Advances in Geometry (eds. J.-S. Brylinski, R. Brylinski, V. Nistor, B. Tsygan and P. Xu), Progress in Math. Vol. 172 (Birkhäuser Boston, 1995), pp. 371-383 and A. N. Kirillov and T. Maenor, A Note on Quantum K-Theory of Flag Varieties, preprint]. As an application we describe explicitly the set of relations among the Gaudin elements in the group ring of the symmetric group, cf. [E. Mukhin, V. Tarasov and A. Varchenko, Bethe Subalgebras of the Group Algebra of the Symmetric Group, preprint arXiv:1004.4248]. Also we describe a few combinatorial properties of some special elements in the associative quasi-classical Yang-Baxter algebra in a connection with the values of the β-Grothendieck polynomials for some special permutations, and on the other hand, with the Ehrhart polynomial of the Chan-Robbins polytope.

Enhanced Condensation of R-113 on a Small Bundle of Horizontal Tubes

DTIC Science & Technology

1991-12-01

Anthony J. l lcaley, Ch an )epartment of Mechanic’ Engineering ABSTRACT Condensation of R-113 was studied using an evaporator/condenser test platform. The...IF 7825 FOR I=1 TO Npair5 7830 ENTER @File;Xa,Ya 7835 S×=Sx+Xa 7840 Sy=Sy+Ya 7845 5x2=Sx2+XaŖ 7850 Sxy-Sxy+Xa*Ya 7855 X=(Xa-Xmin)*Sfx 7860 Y-(Ya-Ymin...9th Int. Heat Transfer Conf., Vol. 3, pp. 15-20, 1990. 33. Fujii, T., Wang, W. Ch ., Koyama, Sh. and Y. Shimizu, Heat Transfer Enhancement for Gravity

Proceedings of the Second International Congress on Recent Developments in Air- and Structure-Borne Sound and Vibration (2nd) Held in Auburn University, Alabama on 4-6 March 1992. Volume 1

DTIC Science & Technology

1992-03-06

convected at high speed ". Philosophical Transactions of the Royal Society A , Vol. 255, 1963, pp. 469-503. 16. DOWLING, A.P., FFOWCS WILLIAMS, J.E. and...atmosphere Af, 1 , M,2 convective Mach number of large scale turbulence structures on the high and low speed sides, respec- tively, of a two-dimensional...level of aerodynamic detuning (0 gust frequency 113 INTRODUCTION In the design of high performance gas turbine engines, acoustic analyses are a

Solubility Report of 1-Methyl-3,5-Dinitro-1H-1,2,4-Triazole (MDNT) and 2-Methyl-4,5-Dinitro-2H-1,2,3-Triazole 1-Oxide (MDNTO) for Co-Crystallization Screen

DTIC Science & Technology

2015-11-01

New Co-Crystals,” Crystal Growth & Design, Vol. 9, No. 3, pp. 1531-1537, 2009. 2 Landenberger, K., Matzger, A., “ Cocrystal Engineering of a...Y., Li, H., Zhou, Y., Zhou, J., Geo, T., Zhang, H., Jiang, G., “Toward Low- Sensitive and High-Energetic Cocrystal 1: Evaluation of the Power and the...Safety of Observed Energetic Cocrystals ,” CrystEngComm, 15, 4003-4014, 2013. 4 Levinthal, M.L., “Propellant Made With Cocrystals of

Engine Response to Distorted Inflow Conditions: Conference Proceedings of the Propulsion and Energetics Specialists’ Meeting (68th) Held in Munich, Germany on 8-9 September 1986.

DTIC Science & Technology

1987-03-01

DISTORTION UNSTEADY INLET DISTORTION CHARACTERISTICS WITH THE B-1 B by C.J.MacMiler and W.R.Haagenson 16 DETERMINATION EXPERIMENTALE DES LOIS DE TRANSFERT DE...compresseurs. Dens ce domaine. los trois principaux objectifs du motoriste sont los suivants (a) - d6mont rer avant los essais en vol. la compatibilitA...ann~es sur la conception des moteurs deavions. 2 - ETHODES DE CALCUL 2.1. METNODES DES SECTEURS DE COMPRESSEUR EN PARALLELE 2.1.1. Description do la m

Numerical Simulation of Fluid Dynamics and Combustion for Ram Accelerator Projectile/Obturator Interaction

DTIC Science & Technology

1993-09-01

dependence obtained from tabulated data ( Stull 1971). p,/W = A, + A2T + A3T 2 + A4T3 + A5T4 (13) For N species only N - 1 specie equations must be solved...Calculations," AIAA Journal, Vol. 21, No. 4, April 1983, pp. 586-592. Stull , D.R., and Prophet, H., ".JANNAF Thermochemical Tables," 2nd ed., National Bureau of...Command Development and Engineering Center ATTN: AMCPNI-ABNIS. T. Dean ATTN: SMCAR-FSA-F. LTC R. Riddle Warien. MI 48092-2498 SMCAR-FSC. G. Ferdinand