C style guide

NASA Technical Reports Server (NTRS)

Doland, Jerry; Valett, Jon

1994-01-01

This document discusses recommended practices and style for programmers using the C language in the Flight Dynamics Division environment. Guidelines are based on generally recommended software engineering techniques, industry resources, and local convention. The Guide offers preferred solutions to common C programming issues and illustrates through examples of C Code.

Don't "Short Circuit" STEM Instruction

ERIC Educational Resources Information Center

Bruxvoort, Crystal; Jadrich, James

2016-01-01

Science students should undertake engineering design projects and carry out scientific investigations, as recommended by the "Next Generation Science Standards" (NGSS Lead States 2013). However, studies show that students misconstrue the goals of science and engineering and are uncertain about their respective practices (Gilbert and Wade…

Liquid rocket engine turbines

NASA Technical Reports Server (NTRS)

1974-01-01

Criteria for the design and development of turbines for rocket engines to meet specific performance, and installation requirements are summarized. The total design problem, and design elements are identified, and the current technology pertaining to these elements is described. Recommended practices for achieving a successful design are included.

Roads to Safety.

ERIC Educational Resources Information Center

Hauer, Ezra

1991-01-01

Contends that the level of safety built into roads is largely unpremeditated and that roads and highways are not as safe as they might be. Discusses practices, standards, and deficiencies in highway and traffic safety related to geometric design and traffic engineering. Recommends increased transportation engineering professionalism and public…

Integrating Science and Engineering to Implement Evidence-Based Practices in Health Care Settings.

PubMed

Wu, Shinyi; Duan, Naihua; Wisdom, Jennifer P; Kravitz, Richard L; Owen, Richard R; Sullivan, J Greer; Wu, Albert W; Di Capua, Paul; Hoagwood, Kimberly Eaton

2015-09-01

Integrating two distinct and complementary paradigms, science and engineering, may produce more effective outcomes for the implementation of evidence-based practices in health care settings. Science formalizes and tests innovations, whereas engineering customizes and optimizes how the innovation is applied tailoring to accommodate local conditions. Together they may accelerate the creation of an evidence-based healthcare system that works effectively in specific health care settings. We give examples of applying engineering methods for better quality, more efficient, and safer implementation of clinical practices, medical devices, and health services systems. A specific example was applying systems engineering design that orchestrated people, process, data, decision-making, and communication through a technology application to implement evidence-based depression care among low-income patients with diabetes. We recommend that leading journals recognize the fundamental role of engineering in implementation research, to improve understanding of design elements that create a better fit between program elements and local context.

A Recommended Framework for the Network-Centric Acquisition Process

DTIC Science & Technology

2009-09-01

ISO /IEC 12207 , Systems and Software Engineering-Software Life-Cycle Processes  ANSI/EIA 632, Processes for Engineering a System. There are...engineering [46]. Some of the process models presented in the DAG are:  ISO /IEC 15288, Systems and Software Engineering-System Life-Cycle Processes...e.g., ISO , IA, Security, etc.). Vetting developers helps ensure that they are using industry best industry practices and maximize the IA compliance

Education and Research Laboratories as a Means of Enhancing the Quality of Professional Engineering Education in Design and Production of Composite Parts

ERIC Educational Resources Information Center

Khaliulin, Valentin I.; Gershtein, Elena M.

2016-01-01

Relevance of this research is determined by quality improvement of professional engineering education. The purpose of this paper is to offer practical recommendations for those interested in establishment of education and research laboratories as a means of enhancing the quality of professional engineering education in design and production of…

29 CFR 1910.1051 - 1,3-Butadiene.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., duration, and results of samples taken; (E) Type of protective devices worn, if any; and (F) Name, social... social security number of the employee; (B) Physician's or other licensed health care professional's...: Good industrial hygiene practices recommend that engineering and work practice controls be used to...

F100 multivariable control synthesis program: Evaluation of a multivariable control using a real-time engine simulation

NASA Technical Reports Server (NTRS)

Szuch, J. R.; Soeder, J. F.; Seldner, K.; Cwynar, D. S.

1977-01-01

The design, evaluation, and testing of a practical, multivariable, linear quadratic regulator control for the F100 turbofan engine were accomplished. NASA evaluation of the multivariable control logic and implementation are covered. The evaluation utilized a real time, hybrid computer simulation of the engine. Results of the evaluation are presented, and recommendations concerning future engine testing of the control are made. Results indicated that the engine testing of the control should be conducted as planned.

Liquid rocket engine combustion stabilization devices

NASA Technical Reports Server (NTRS)

1974-01-01

Combustion instability, which results from a coupling of the combustion process and the fluid dynamics of the engine system, was investigated. The design of devices which reduce coupling (combustion chamber baffles) and devices which increase damping (acoustic absorbers) are described. Included in the discussion are design criteria and recommended practices, structural and mechanical design, thermal control, baffle geometry, baffle/engine interactions, acoustic damping analysis, and absorber configurations.

Probabilistic Requirements (Partial) Verification Methods Best Practices Improvement. Variables Acceptance Sampling Calculators: Derivations and Verification of Plans. Volume 1

NASA Technical Reports Server (NTRS)

Johnson, Kenneth L.; White, K, Preston, Jr.

2012-01-01

The NASA Engineering and Safety Center was requested to improve on the Best Practices document produced for the NESC assessment, Verification of Probabilistic Requirements for the Constellation Program, by giving a recommended procedure for using acceptance sampling by variables techniques. This recommended procedure would be used as an alternative to the potentially resource-intensive acceptance sampling by attributes method given in the document. This document contains the outcome of the assessment.

An empirical study of software design practices

NASA Technical Reports Server (NTRS)

Card, David N.; Church, Victor E.; Agresti, William W.

1986-01-01

Software engineers have developed a large body of software design theory and folklore, much of which was never validated. The results of an empirical study of software design practices in one specific environment are presented. The practices examined affect module size, module strength, data coupling, descendant span, unreferenced variables, and software reuse. Measures characteristic of these practices were extracted from 887 FORTRAN modules developed for five flight dynamics software projects monitored by the Software Engineering Laboratory (SEL). The relationship of these measures to cost and fault rate was analyzed using a contingency table procedure. The results show that some recommended design practices, despite their intuitive appeal, are ineffective in this environment, whereas others are very effective.

16 CFR 309.22 - Determining estimated cruising range.

Code of Federal Regulations, 2012 CFR

2012-01-01

... set forth in Society of Automotive Engineers (“SAE”) Surface Vehicle Recommended Practice SAE J1634-1993-05-20, “Electric Vehicle Energy Consumption and Range Test Procedure.” This incorporation by... part 51. Copies of SAE J1634-1993-05-20 may be obtained from the Society of Automotive Engineers, 400...

16 CFR 309.22 - Determining estimated cruising range.

Code of Federal Regulations, 2013 CFR

2013-01-01

... set forth in Society of Automotive Engineers (“SAE”) Surface Vehicle Recommended Practice SAE J1634-1993-05-20, “Electric Vehicle Energy Consumption and Range Test Procedure.” This incorporation by... part 51. Copies of SAE J1634-1993-05-20 may be obtained from the Society of Automotive Engineers, 400...

16 CFR 309.22 - Determining estimated cruising range.

Code of Federal Regulations, 2010 CFR

2010-01-01

... set forth in Society of Automotive Engineers (“SAE”) Surface Vehicle Recommended Practice SAE J1634-1993-05-20, “Electric Vehicle Energy Consumption and Range Test Procedure.” This incorporation by... part 51. Copies of SAE J1634-1993-05-20 may be obtained from the Society of Automotive Engineers, 400...

16 CFR 309.22 - Determining estimated cruising range.

Code of Federal Regulations, 2011 CFR

2011-01-01

... set forth in Society of Automotive Engineers (“SAE”) Surface Vehicle Recommended Practice SAE J1634-1993-05-20, “Electric Vehicle Energy Consumption and Range Test Procedure.” This incorporation by... part 51. Copies of SAE J1634-1993-05-20 may be obtained from the Society of Automotive Engineers, 400...

Application of Recommended Design Practices for Conceptual Nuclear Fusion Space Propulsion Systems

NASA Technical Reports Server (NTRS)

Williams, Craig H.

2004-01-01

An AIAA Special Project Report was recently produced by AIAA's Nuclear and Future Flight Propulsion Technical Committee and is currently in peer review. The Report provides recommended design practices for conceptual engineering studies of nuclear fusion space propulsion systems. Discussion and recommendations are made on key topics including design reference missions, degree of technological extrapolation and concomitant risk, thoroughness in calculating mass properties (nominal mass properties, weight-growth contingency and propellant margins, and specific impulse), and thoroughness in calculating power generation and usage (power-flow, power contingencies, specific power). The report represents a general consensus of the nuclear fusion space propulsion system conceptual design community and proposes 15 recommendations. This paper expands on the Report by providing specific examples illustrating how to apply each of the recommendations.

About, for, in or through entrepreneurship in engineering education

NASA Astrophysics Data System (ADS)

Mäkimurto-Koivumaa, Soili; Belt, Pekka

2016-09-01

Engineering competences form a potential basis for entrepreneurship. There are pressures to find new approaches to entrepreneurship education (EE) in engineering education, as the traditional analytical logic of engineering does not match the modern view of entrepreneurship. Since the previous models do not give tangible enough tools on how to organise EE in practice, this article aims to develop a new framework for EE at the university level. We approach this aim by analysing existing scientific literature complemented by long-term practical observations, enabling a fruitful interplay between theory and practice. The developed framework recommends aspects in EE to be emphasised during each year of the study process. Action-based learning methods are highlighted in the beginning of studies to support students' personal growth. Explicit business knowledge is to be gradually increased only when professional, field-specific knowledge has been adequately accumulated.

Clinical practice recommendations for depression.

PubMed

Malhi, G S; Adams, D; Porter, R; Wignall, A; Lampe, L; O'Connor, N; Paton, M; Newton, L A; Walter, G; Taylor, A; Berk, M; Mulder, R T

2009-01-01

To provide clinically relevant evidence-based recommendations for the management of depression in adults that are informative, easy to assimilate and facilitate clinical decision making. A comprehensive literature review of over 500 articles was undertaken using electronic database search engines (e.g. MEDLINE, PsychINFO and Cochrane reviews). In addition articles, book chapters and other literature known to the authors were reviewed. The findings were then formulated into a set of recommendations that were developed by a multidisciplinary team of clinicians who routinely deal with mood disorders. The recommendations then underwent consultative review by a broader advisory panel that included experts in the field, clinical staff and patient representatives. The clinical practice recommendations for depression (Depression CPR) summarize evidence-based treatments and provide a synopsis of recommendations relating to each phase of the illness. They are designed for clinical use and have therefore been presented succinctly in an innovative and engaging manner that is clear and informative. These up-to-date recommendations provide an evidence-based framework that incorporates clinical wisdom and consideration of individual factors in the management of depression. Further, the novel style and practical approach should promote uptake and implementation.

Integrating Science and Engineering to Implement Evidence-Based Practices in Health Care Settings

PubMed Central

Wu, Shinyi; Duan, Naihua; Wisdom, Jennifer P.; Kravitz, Richard L.; Owen, Richard R.; Sullivan, Greer; Wu, Albert W.; Di Capua, Paul; Hoagwood, Kimberly Eaton

2015-01-01

Integrating two distinct and complementary paradigms, science and engineering, may produce more effective outcomes for the implementation of evidence-based practices in health care settings. Science formalizes and tests innovations, whereas engineering customizes and optimizes how the innovation is applied tailoring to accommodate local conditions. Together they may accelerate the creation of an evidence-based healthcare system that works effectively in specific health care settings. We give examples of applying engineering methods for better quality, more efficient, and safer implementation of clinical practices, medical devices, and health services systems. A specific example was applying systems engineering design that orchestrated people, process, data, decision-making, and communication through a technology application to implement evidence-based depression care among low-income patients with diabetes. We recommend that leading journals recognize the fundamental role of engineering in implementation research, to improve understanding of design elements that create a better fit between program elements and local context. PMID:25217100

16 CFR 1203.3 - Referenced documents.

Code of Federal Regulations, 2014 CFR

2014-01-01

... to the draft ISO standard. (2) SAE Recommended Practice SAE J211 OCT88, Instrumentation for Impact..., Instrumentation for Impact Tests, are available from Society of Automotive Engineers, 400 Commonwealth Dr...

16 CFR 1203.3 - Referenced documents.

Code of Federal Regulations, 2011 CFR

2011-01-01

... to the draft ISO standard. (2) SAE Recommended Practice SAE J211 OCT88, Instrumentation for Impact..., Instrumentation for Impact Tests, are available from Society of Automotive Engineers, 400 Commonwealth Dr...

16 CFR 1203.3 - Referenced documents.

Code of Federal Regulations, 2012 CFR

2012-01-01

... to the draft ISO standard. (2) SAE Recommended Practice SAE J211 OCT88, Instrumentation for Impact..., Instrumentation for Impact Tests, are available from Society of Automotive Engineers, 400 Commonwealth Dr...

40 CFR 89.6 - Reference materials.

Code of Federal Regulations, 2011 CFR

2011-07-01

... November 89: Recommended Practice for Engine Testing with Low Temperature Charge Air Cooler Systems in a Dynamometer Test Cell 89.327-96 SAE Paper 770141: Optimization of a Flame Ionization Detector for...

Ways of thinking about and teaching ethical problem solving: microethics and macroethics in engineering.

PubMed

Herkert, Joseph R

2005-07-01

Engineering ethics entails three frames of reference: individual, professional, and social. "Microethics" considers individuals and internal relations of the engineering profession; "macroethics" applies to the collective social responsibility of the profession and to societal decisions about technology. Most research and teaching in engineering ethics, including online resources, has had a "micro" focus. Mechanisms for incorporating macroethical perspectives include: integrating engineering ethics and science, technology and society (STS); closer integration of engineering ethics and computer ethics; and consideration of the influence of professional engineering societies and corporate social responsibility programs on ethical engineering practice. Integrating macroethical issues and concerns in engineering ethics involves broadening the context of ethical problem solving. This in turn implies: developing courses emphasizing both micro and macro perspectives, providing faculty development that includes training in both STS and practical ethics; and revision of curriculum materials, including online resources. Multidisciplinary collaboration is recommended 1) to create online case studies emphasizing ethical decision making in individual, professional, and societal contexts; 2) to leverage existing online computer ethics resources with relevance to engineering education and practice; and 3) to create transparent linkages between public policy positions advocated by professional societies and codes of ethics.

Implementing AORN recommended practices for sharps safety.

PubMed

Ford, Donna A

2014-01-01

Prevention of percutaneous sharps injuries in perioperative settings remains a challenge. Occupational transmission of bloodborne pathogens, not only from patients to health care providers but also from health care providers to patients, is a significant concern. Legislation and position statements geared toward ensuring the safety of patients and health care workers have not resulted in significantly reduced sharps injuries in perioperative settings. Awareness and understanding of the types of percutaneous injuries that occur in perioperative settings is fundamental to developing an effective sharps injury prevention program. The AORN "Recommended practices for sharps safety" clearly delineates evidence-based recommendations for sharps injury prevention. Perioperative RNs can lead efforts to change practice for the safety of patients and perioperative team members by promoting the elimination of sharps hazards; the use of engineering, work practice, and administrative controls; and the proper use of personal protective equipment, including double gloving. Copyright © 2014 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Liquid rocket engine centrifugal flow turbopumps. [design criteria

NASA Technical Reports Server (NTRS)

1973-01-01

Design criteria and recommended practices are discussed for the following configurations selected from the design sequence of a liquid rocket engine centrifugal flow turbopump: (1) pump performance including speed, efficiency, and flow range; (2) impeller; (3) housing; and (4) thrust balance system. Hydrodynamic, structural, and mechanical problems are addressed for the achievement of required pump performance within the constraints imposed by the engine/turbopump system. Materials and fabrication specifications are also discussed.

40 CFR 92.5 - Reference materials.

Code of Federal Regulations, 2011 CFR

2011-07-01

... § 92.113 ASTM D 1945-91, Standard Test Method for Analysis of Natural Gas by Gas Chromatography § 92... Supercritical Fluid Chromatography § 92.113 ASTM E 29-93a, Standard Practice for Using Significant Digits in....119 SAE Recommended Practice J244, Measurement of Intake Air or Exhaust Gas Flow of Diesel Engines...

Quantitative assessment of landslide risk in design practice

DOE Office of Scientific and Technical Information (OSTI.GOV)

Romanov, A.M.; Darevskii, V.E.

1995-03-01

Developments of the State Institute for River Transport Protection, which are directed toward practical implementation of an engineering method recommended by regulatory documents for calculation of landslide phenomena, are cited; the potential of operating computer software is demonstrated. Results of calculations are compared with test data, and also with problems solved in the new developments.

The Flying Classroom--A Cost Effective Integrated Approach to Learning and Teaching Flight Dynamics

ERIC Educational Resources Information Center

Bromfield, Michael A.; Belberov, Aleksandar

2017-01-01

In the UK, the Royal Aeronautical Society recommends the inclusion of practical flight exercises for accredited undergraduate aerospace engineering programmes to enhance learning and student experience. The majority of academic institutions teaching aerospace in the UK separate the theory and practice of flight dynamics with students attending a…

Instructional Engineering Principles to Frame the Future of Reading Intervention Research and Practice

ERIC Educational Resources Information Center

Simmons, Deborah

2015-01-01

In this article, I outline thoughts regarding the complexities and possibilities of the next generation of reading intervention for students who do not benefit from typical instructional practices. I ground my recommendations in school-based research and observations conducted primarily in kindergarten through third grade and more recently in…

Direct Final Rule for Technical Amendments for Marine Spark-Ignition Engines and Vessels

EPA Pesticide Factsheets

Rule published September 16, 2010 to make technical amendments to the design standard for portable marine fuel tanks. This rule incorporates safe recommended practices, developed through industry consensus.

33 CFR 183.5 - Incorporation by reference.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 08854: IEEE 45 IEEE Recommended Practice for Electrical Installations on Shipboard—1983. Cable..., Warrendale, PA 15096: SAE J378 Marine Engine Wiring—1984 § 183.430 SAE J557 High Tension Ignition Cable—1968...

Clinical practice recommendations for bipolar disorder.

PubMed

Malhi, G S; Adams, D; Lampe, L; Paton, M; O'Connor, N; Newton, L A; Walter, G; Taylor, A; Porter, R; Mulder, R T; Berk, M

2009-01-01

To provide clinically relevant evidence-based recommendations for the management of bipolar disorder in adults that are informative, easy to assimilate and facilitate clinical decision-making. A comprehensive literature review of over 500 articles was undertaken using electronic database search engines (e.g. MEDLINE, PsychINFO and Cochrane reviews). In addition articles, book chapters and other literature known to the authors were reviewed. The findings were then formulated into a set of recommendations that were developed by a multidisciplinary team of clinicians who routinely deal with mood disorders. These preliminary recommendations underwent extensive consultative review by a broader advisory panel that included experts in the field, clinical staff and patient representatives. The clinical practice recommendations for bipolar disorder (bipolar CPR) summarise evidence-based treatments and provide a synopsis of recommendations relating to each phase of the illness. They are designed for clinical use and have therefore been presented succinctly in an innovative and engaging manner that is clear and informative. These up-to-date recommendations provide an evidence-based framework that incorporates clinical wisdom and consideration of individual factors in the management of bipolar disorder. Further, the novel style and practical approach should promote their uptake and implementation.

Biomimicry, Biofabrication, and Biohybrid Systems: The Emergence and Evolution of Biological Design.

PubMed

Raman, Ritu; Bashir, Rashid

2017-10-01

The discipline of biological design has a relatively short history, but has undergone very rapid expansion and development over that time. This Progress Report outlines the evolution of this field from biomimicry to biofabrication to biohybrid systems' design, showcasing how each subfield incorporates bioinspired dynamic adaptation into engineered systems. Ethical implications of biological design are discussed, with an emphasis on establishing responsible practices for engineering non-natural or hypernatural functional behaviors in biohybrid systems. This report concludes with recommendations for implementing biological design into educational curricula, ensuring effective and responsible practices for the next generation of engineers and scientists. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

KC-46 Tanker Aircraft: Program Generally Stable but Improvements in Managing Schedule Are Needed

DTIC Science & Technology

2013-02-27

testing, and supplier management. An important contractual requirement (and best practice ) is for Boeing to release 90 percent of the total engineering...design is stable, and manufacturing processes are mature. As we reported last year, while the program has implemented many acquisition best practices ...assessed the program’s acquisition plan to determine compliance with acquisition legislation and acquisition best practices . What GAO Recommends GAO

Federal lands highway phase II benchmarking study

DOT National Transportation Integrated Search

2000-11-01

In order to determine the most effective use of existing and future staff, to quantify the appropriate number of engineers and technicians required to deliver the Federal Lands Highway Program and to identify recommended management practices in proje...

29 CFR 1926.1001 - Minimum performance criteria for rollover protective structures for designated scrapers, loaders...

Code of Federal Regulations, 2013 CFR

2013-07-01

... of Steel Products (available at each Regional Office of the Occupational Safety and Health... Society of Automotive Engineers Recommended Practices: SAE J320a, Minimum Performance Criteria for Roll...

29 CFR 1926.1001 - Minimum performance criteria for rollover protective structures for designated scrapers, loaders...

Code of Federal Regulations, 2014 CFR

2014-07-01

... of Steel Products (available at each Regional Office of the Occupational Safety and Health... Society of Automotive Engineers Recommended Practices: SAE J320a, Minimum Performance Criteria for Roll...

29 CFR 1926.1001 - Minimum performance criteria for rollover protective structures for designated scrapers, loaders...

Code of Federal Regulations, 2010 CFR

2010-07-01

... of Steel Products (available at each Regional Office of the Occupational Safety and Health... Society of Automotive Engineers Recommended Practices: SAE J320a, Minimum Performance Criteria for Roll...

29 CFR 1926.1001 - Minimum performance criteria for rollover protective structures for designated scrapers, loaders...

Code of Federal Regulations, 2011 CFR

2011-07-01

... of Steel Products (available at each Regional Office of the Occupational Safety and Health... Society of Automotive Engineers Recommended Practices: SAE J320a, Minimum Performance Criteria for Roll...

29 CFR 1926.1001 - Minimum performance criteria for rollover protective structures for designated scrapers, loaders...

Code of Federal Regulations, 2012 CFR

2012-07-01

... of Steel Products (available at each Regional Office of the Occupational Safety and Health... Society of Automotive Engineers Recommended Practices: SAE J320a, Minimum Performance Criteria for Roll...

A case study of the knowledge transfer practices from the perspectives of highly experienced engineers in the aerospace industry

NASA Astrophysics Data System (ADS)

Martin, Deloris

Purpose. The purpose of this study was to describe the existing knowledge transfer practices in selected aerospace companies as perceived by highly experienced engineers retiring from the company. Specifically it was designed to investigate and describe (a) the processes and procedures used to transfer knowledge, (b) the systems that encourage knowledge transfer, (c) the impact of management actions on knowledge transfer, and (d) constraining factors that might impede knowledge transfer. Methodology. A descriptive case study was the methodology applied in this study. Qualitative data were gathered from highly experienced engineers from 3 large aerospace companies in Southern California. A semistructured interview was conducted face-to-face with each participant in a private or semiprivate, non-workplace setting to obtain each engineer's perspectives on his or her company's current knowledge transfer practices. Findings. The participants in this study preferred to transfer knowledge using face-to-face methods, one-on-one, through actual troubleshooting and problem-solving scenarios. Managers in these aerospace companies were observed as having knowledge transfer as a low priority; they tend not to promote knowledge transfer among their employees. While mentoring is the most common knowledge transfer system these companies offer, it is not the preferred method of knowledge transfer among the highly experienced engineers. Job security and schedule pressures are the top constraints that impede knowledge transfer between the highly experienced engineers and their coworkers. Conclusions. The study data support the conclusion that the highly experienced engineers in the study's aerospace companies would more likely transfer their knowledge to those remaining in the industry if the transfer could occur face-to-face with management support and acknowledgement of their expertise and if their job security is not threatened. The study also supports the conclusion that managers should be responsible for the leadership in developing a knowledge-sharing culture and rewarding those who do share. Recommendations. It is recommended that a quantitative study of highly experienced engineers in aerospace be conducted to determine the degree to which knowledge-sharing methods, processes, and procedures may be effective in capturing their knowledge. It is also recommended that a replication of this study be undertaken to include the perspectives of first-line managers on developing a knowledge-sharing culture for the aerospace industry.

Air Force Space Command. Space and Missile Systems Center Standard. Configuration Management

DTIC Science & Technology

2008-06-13

Aerospace Corporation report number TOR-2006( 8583 )-1. 3. Beneficial comments (recommendations, additions, deletions) and any pertinent data that...Engineering Drawing Practices IEEE STD 610.12 Glossary of Software Engineering Terminology, September 28,1990 ISO /IEC 12207 Software Life...item, regardless of media, formally designated and fixed at a specific time during the configuration item’s life cycle. (Source: ISO /IEC 12207

49 CFR 587.12 - Incorporation by reference.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Incorporation by reference. Society of Automotive Engineers (SAE) Recommended Practice J211/1 Rev. MAR 95... accordance with 5 U.S.C. 552(a) and 1 CFR part 51. A copy may be obtained from SAE at Society of Automotive...

49 CFR 587.12 - Incorporation by reference.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Incorporation by reference. Society of Automotive Engineers (SAE) Recommended Practice J211/1 Rev. MAR 95... accordance with 5 U.S.C. 552(a) and 1 CFR part 51. A copy may be obtained from SAE at Society of Automotive...

49 CFR 587.12 - Incorporation by reference.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Incorporation by reference. Society of Automotive Engineers (SAE) Recommended Practice J211/1 Rev. MAR 95... accordance with 5 U.S.C. 552(a) and 1 CFR part 51. A copy may be obtained from SAE at Society of Automotive...

49 CFR 587.12 - Incorporation by reference.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Incorporation by reference. Society of Automotive Engineers (SAE) Recommended Practice J211/1 Rev. MAR 95... accordance with 5 U.S.C. 552(a) and 1 CFR part 51. A copy may be obtained from SAE at Society of Automotive...

49 CFR 587.12 - Incorporation by reference.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Incorporation by reference. Society of Automotive Engineers (SAE) Recommended Practice J211/1 Rev. MAR 95... accordance with 5 U.S.C. 552(a) and 1 CFR part 51. A copy may be obtained from SAE at Society of Automotive...

Proceedings of the 19th Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1994-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of applications software. The goals of the SEL are: (1) to understand the software development process in the GSFC environment; (2) to measure the effects of various methodologies, tools, and models on this process; and (3) to identify and then to apply successful development practices. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that include this document.

Educational Method of Engineering Ethics Aiming for Comprehensive Understanding

NASA Astrophysics Data System (ADS)

Yasui, Mitsukuni; Fujiki, Hiroyuki; Aoyagi, Manabu; Sugata, Noriyuki; Hayasaka, Narihito

We have proposed the omnibus style to teach an engineering ethics program. This paper showed the essentials to practice the class. The engineering ethics program is constituted with the factors; grade, subject, objective even if it is operated by some themes and teachers in the style of omnibus. Also, teachers have to select the cases which have dilemma of the engineer and the good effect. And they should teach how to analyze the case. Evaluation of student activity must be made up by versatile style according to objective. And student is recommended to understand the relation of activity and object.

A sensitivity analysis comparing two procedures for adjusting as-measured spectra to reference conditions

DOT National Transportation Integrated Search

2002-04-01

The Society of Automotive Engineers (SAE) Aerospace Recommended Practice (ARP) No. 866A (866A), and a : procedure utilizing pure-tone absorption equations developed in support of the International Organization : for Standardizations (ISO) 9613-...

Reducing agricultural greenhouse gas emissions: role of biotechnology, organic systems, and consumer behavior

USDA-ARS?s Scientific Manuscript database

All agricultural systems have environmental and societal costs and benefits that should be objectively quantified before recommending specific management practices. Agricultural biotechnology, which takes advantage of genetically engineered organisms (GEOs), along with organic cropping systems, econ...

Digital Model-Based Engineering: Expectations, Prerequisites, and Challenges of Infusion

NASA Technical Reports Server (NTRS)

Hale, J. P.; Zimmerman, P.; Kukkala, G.; Guerrero, J.; Kobryn, P.; Puchek, B.; Bisconti, M.; Baldwin, C.; Mulpuri, M.

2017-01-01

Digital model-based engineering (DMbE) is the use of digital artifacts, digital environments, and digital tools in the performance of engineering functions. DMbE is intended to allow an organization to progress from documentation-based engineering methods to digital methods that may provide greater flexibility, agility, and efficiency. The term 'DMbE' was developed as part of an effort by the Model-Based Systems Engineering (MBSE) Infusion Task team to identify what government organizations might expect in the course of moving to or infusing MBSE into their organizations. The Task team was established by the Interagency Working Group on Engineering Complex Systems, an informal collaboration among government systems engineering organizations. This Technical Memorandum (TM) discusses the work of the MBSE Infusion Task team to date. The Task team identified prerequisites, expectations, initial challenges, and recommendations for areas of study to pursue, as well as examples of efforts already in progress. The team identified the following five expectations associated with DMbE infusion, discussed further in this TM: (1) Informed decision making through increased transparency, and greater insight. (2) Enhanced communication. (3) Increased understanding for greater flexibility/adaptability in design. (4) Increased confidence that the capability will perform as expected. (5) Increased efficiency. The team identified the following seven challenges an organization might encounter when looking to infuse DMbE: (1) Assessing value added to the organization. Not all DMbE practices will be applicable to every situation in every organization, and not all implementations will have positive results. (2) Overcoming organizational and cultural hurdles. (3) Adopting contractual practices and technical data management. (4) Redefining configuration management. The DMbE environment changes the range of configuration information to be managed to include performance and design models, database objects, as well as more traditional book-form objects and formats. (5) Developing information technology (IT) infrastructure. Approaches to implementing critical, enabling IT infrastructure capabilities must be flexible, reconfigurable, and updatable. (6) Ensuring security of the single source of truth (7) Potential overreliance on quantitative data over qualitative data. Executable/ computational models and simulations generally incorporate and generate quantitative vice qualitative data. The Task team also developed several recommendations for government, academia, and industry, as discussed in this TM. The Task team recommends continuing beyond this initial work to further develop the means of implementing DMbE and to look for opportunities to collaborate and share best practices.

Human Systems Integration in Practice: Constellation Lessons Learned

NASA Technical Reports Server (NTRS)

Zumbado, Jennifer Rochlis

2012-01-01

NASA's Constellation program provided a unique testbed for Human Systems Integration (HSI) as a fundamental element of the Systems Engineering process. Constellation was the first major program to have HSI mandated by NASA's Human Rating document. Proper HSI is critical to the success of any project that relies on humans to function as operators, maintainers, or controllers of a system. HSI improves mission, system and human performance, significantly reduces lifecycle costs, lowers risk and minimizes re-design. Successful HSI begins with sufficient project schedule dedicated to the generation of human systems requirements, but is by no means solely a requirements management process. A top-down systems engineering process that recognizes throughout the organization, human factors as a technical discipline equal to traditional engineering disciplines with authority for the overall system. This partners with a bottoms-up mechanism for human-centered design and technical issue resolution. The Constellation Human Systems Integration Group (HSIG) was a part of the Systems Engineering and Integration (SE&I) organization within the program office, and existed alongside similar groups such as Flight Performance, Environments & Constraints, and Integrated Loads, Structures and Mechanisms. While the HSIG successfully managed, via influence leadership, a down-and-in Community of Practice to facilitate technical integration and issue resolution, it lacked parallel top-down authority to drive integrated design. This presentation will discuss how HSI was applied to Constellation, the lessons learned and best practices it revealed, and recommendations to future NASA program and project managers. This presentation will discuss how Human Systems Integration (HSI) was applied to NASA's Constellation program, the lessons learned and best practices it revealed, and recommendations to future NASA program and project managers on how to accomplish this critical function.

Recommendations for Evaluating Multiple Filters in Ballast Water Management Systems for US Type Approval

DTIC Science & Technology

2016-01-01

is extremely unlikely to be practicable . A second approach is to conduct a full suite of TA testing on a BWMS with a “base filter” configuration...that of full TA testing. Here, three land-based tests would be conducted, and O&M and component testing would also occur. If time or practicality ... Practical salinity units SAE Society of Automotive Engineers SDI Silt density index SOP Standard operating procedure STEP Shipboard Technology

Communications systems checkout study

NASA Technical Reports Server (NTRS)

Ginter, W. G.

1972-01-01

The results and conclusions of an engineering study of Space Station communications subsystem checkout are reported. The primary purpose of the study is to recommend specific guidelines and constraints for the design and utilization of the communications subsystem leading to a practical and effective means of onboard checkout implementation. Major study objectives are as follows: (1) identify candidate communications subsystem checkout concepts, (2) determine implementation impacts of feasible concepts, (3) evaluate practicality and effectiveness of alternative concepts, (4) propose baseline modifications to accommodate preferred concepts, and (5) recommend areas for additional investigation. In addition, study results are interpreted, where appropriate, in terms of their applicability to checkout of Shuttle-Orbiter communications subsystem.

33 CFR 183.5 - Incorporation by reference.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Plastics § 183.114 Institute of Electrical and Electronics, Engineers, Inc., 445 Hoes Lane, Piscataway, NJ 08854: IEEE 45 IEEE Recommended Practice for Electrical Installations on Shipboard—1983. Cable... Council, Inc., 3069 Solomons Island Road, Edgewater, Maryland 21037-1416: ABYC A-16 Electric Navigation...

33 CFR 183.5 - Incorporation by reference.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Plastics § 183.114 Institute of Electrical and Electronics, Engineers, Inc., 445 Hoes Lane, Piscataway, NJ 08854: IEEE 45 IEEE Recommended Practice for Electrical Installations on Shipboard—1983. Cable... Council, Inc., 3069 Solomons Island Road, Edgewater, Maryland 21037-1416: ABYC A-16 Electric Navigation...

33 CFR 183.5 - Incorporation by reference.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Plastics § 183.114 Institute of Electrical and Electronics, Engineers, Inc., 445 Hoes Lane, Piscataway, NJ 08854: IEEE 45 IEEE Recommended Practice for Electrical Installations on Shipboard—1983. Cable... Council, Inc., 3069 Solomons Island Road, Edgewater, Maryland 21037-1416: ABYC A-16 Electric Navigation...

33 CFR 183.5 - Incorporation by reference.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Plastics § 183.114 Institute of Electrical and Electronics, Engineers, Inc., 445 Hoes Lane, Piscataway, NJ 08854: IEEE 45 IEEE Recommended Practice for Electrical Installations on Shipboard—1983. Cable... Council, Inc., 3069 Solomons Island Road, Edgewater, Maryland 21037-1416: ABYC A-16 Electric Navigation...

Korean clinical practice guideline for benign prostatic hyperplasia

PubMed Central

Yeo, Jeong Kyun; Choi, Hun; Bae, Jae Hyun; Kim, Jae Heon; Yang, Seong Ok; Oh, Chul Young; Cho, Young Sam; Kim, Kyoung Woo

2016-01-01

In 2014, the Korean Urological Association organized the Benign Prostatic Hyperplasia Guideline Developing Committee composed of experts in the field of benign prostatic hyperplasia (BPH) with the participation of the Korean Academy of Family Medicine and the Korean Continence Society to develop a Korean clinical practice guideline for BPH. The purpose of this clinical practice guideline is to provide current and comprehensive recommendations for the evaluation and treatment of BPH. The committee developed the guideline mainly by adapting existing guidelines and partially by using the de novo method. A comprehensive literature review was carried out primarily from 2009 to 2013 by using medical search engines including data from Korea. Based on the published evidence, recommendations were synthesized, and the level of evidence of the recommendations was determined by using methods adapted from the 2011 Oxford Centre for Evidence-Based Medicine. Meta-analysis was done for one key question and four recommendations. A draft guideline was reviewed by expert peer reviewers and discussed at an expert consensus meeting until final agreement was achieved. This evidence-based guideline for BPH provides recommendations to primary practitioners and urologists for the diagnosis and treatment of BPH in men older than 40 years. PMID:26966724

A report on NASA software engineering and Ada training requirements

NASA Technical Reports Server (NTRS)

Legrand, Sue; Freedman, Glenn B.; Svabek, L.

1987-01-01

NASA's software engineering and Ada skill base are assessed and information that may result in new models for software engineering, Ada training plans, and curricula are provided. A quantitative assessment which reflects the requirements for software engineering and Ada training across NASA is provided. A recommended implementation plan including a suggested curriculum with associated duration per course and suggested means of delivery is also provided. The distinction between education and training is made. Although it was directed to focus on NASA's need for the latter, the key relationships to software engineering education are also identified. A rationale and strategy for implementing a life cycle education and training program are detailed in support of improved software engineering practices and the transition to Ada.

Recommended Practices for Measurement of Gas Path Pressures and Temperatures for Performance Assessment of Aircraft Turbine Engines and Components (Les Methodes Recommandees pour la Mesure de la Pression et de la Temperature de la Veine Gazeuse en Vue de l’Evaluation des Performances des Turbines Aeronautiques et de leurs Composants

DTIC Science & Technology

1990-06-01

reduction software , prior to converting all remaining test which requires internal compensation. T he r sidual effect is pressures to engineering units...Reduction Conversion of Millivolts to Engineering Units. Carrying out numerical integrations to obtain area and mass weighted averages for various...Performance Assessment of Aircraft Turbine Engines and Components (Les MWthodes Recommande’es pour la Mesure de la Pression et de ]a Temperature de la

NASA Software Engineering Benchmarking Study

NASA Technical Reports Server (NTRS)

Rarick, Heather L.; Godfrey, Sara H.; Kelly, John C.; Crumbley, Robert T.; Wifl, Joel M.

2013-01-01

To identify best practices for the improvement of software engineering on projects, NASA's Offices of Chief Engineer (OCE) and Safety and Mission Assurance (OSMA) formed a team led by Heather Rarick and Sally Godfrey to conduct this benchmarking study. The primary goals of the study are to identify best practices that: Improve the management and technical development of software intensive systems; Have a track record of successful deployment by aerospace industries, universities [including research and development (R&D) laboratories], and defense services, as well as NASA's own component Centers; and Identify candidate solutions for NASA's software issues. Beginning in the late fall of 2010, focus topics were chosen and interview questions were developed, based on the NASA top software challenges. Between February 2011 and November 2011, the Benchmark Team interviewed a total of 18 organizations, consisting of five NASA Centers, five industry organizations, four defense services organizations, and four university or university R and D laboratory organizations. A software assurance representative also participated in each of the interviews to focus on assurance and software safety best practices. Interviewees provided a wealth of information on each topic area that included: software policy, software acquisition, software assurance, testing, training, maintaining rigor in small projects, metrics, and use of the Capability Maturity Model Integration (CMMI) framework, as well as a number of special topics that came up in the discussions. NASA's software engineering practices compared favorably with the external organizations in most benchmark areas, but in every topic, there were ways in which NASA could improve its practices. Compared to defense services organizations and some of the industry organizations, one of NASA's notable weaknesses involved communication with contractors regarding its policies and requirements for acquired software. One of NASA's strengths was its software assurance practices, which seemed to rate well in comparison to the other organizational groups and also seemed to include a larger scope of activities. An unexpected benefit of the software benchmarking study was the identification of many opportunities for collaboration in areas including metrics, training, sharing of CMMI experiences and resources such as instructors and CMMI Lead Appraisers, and even sharing of assets such as documented processes. A further unexpected benefit of the study was the feedback on NASA practices that was received from some of the organizations interviewed. From that feedback, other potential areas where NASA could improve were highlighted, such as accuracy of software cost estimation and budgetary practices. The detailed report contains discussion of the practices noted in each of the topic areas, as well as a summary of observations and recommendations from each of the topic areas. The resulting 24 recommendations from the topic areas were then consolidated to eliminate duplication and culled into a set of 14 suggested actionable recommendations. This final set of actionable recommendations, listed below, are items that can be implemented to improve NASA's software engineering practices and to help address many of the items that were listed in the NASA top software engineering issues. 1. Develop and implement standard contract language for software procurements. 2. Advance accurate and trusted software cost estimates for both procured and in-house software and improve the capture of actual cost data to facilitate further improvements. 3. Establish a consistent set of objectives and expectations, specifically types of metrics at the Agency level, so key trends and models can be identified and used to continuously improve software processes and each software development effort. 4. Maintain the CMMI Maturity Level requirement for critical NASA projects and use CMMI to measure organizations developing software for NASA. 5.onsolidate, collect and, if needed, develop common processes principles and other assets across the Agency in order to provide more consistency in software development and acquisition practices and to reduce the overall cost of maintaining or increasing current NASA CMMI maturity levels. 6. Provide additional support for small projects that includes: (a) guidance for appropriate tailoring of requirements for small projects, (b) availability of suitable tools, including support tool set-up and training, and (c) training for small project personnel, assurance personnel and technical authorities on the acceptable options for tailoring requirements and performing assurance on small projects. 7. Develop software training classes for the more experienced software engineers using on-line training, videos, or small separate modules of training that can be accommodated as needed throughout a project. 8. Create guidelines to structure non-classroom training opportunities such as mentoring, peer reviews, lessons learned sessions, and on-the-job training. 9. Develop a set of predictive software defect data and a process for assessing software testing metric data against it. 10. Assess Agency-wide licenses for commonly used software tools. 11. Fill the knowledge gap in common software engineering practices for new hires and co-ops.12. Work through the Science, Technology, Engineering and Mathematics (STEM) program with universities in strengthening education in the use of common software engineering practices and standards. 13. Follow up this benchmark study with a deeper look into what both internal and external organizations perceive as the scope of software assurance, the value they expect to obtain from it, and the shortcomings they experience in the current practice. 14. Continue interactions with external software engineering environment through collaborations, knowledge sharing, and benchmarking.

Recommended Practice for Use of Emissive Probes in Electric Propulsion Testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheehan, J. P.; Raitses, Yevgeny; Hershkowitz, Noah

Here, this article provides recommended methods for building, operating, and taking plasma potential measurements from electron-emitting probes in electric propulsion devices, including Hall thrusters, gridded ion engines, and others. The two major techniques, the floating point technique and the inflection point technique, are described in detail as well as calibration and error-reduction methods. The major heating methods are described as well as the various considerations for emissive probe construction. Lastly, special considerations for electric propulsion plasmas are addressed, including high-energy densities, ion flows, magnetic fields, and potential fluctuations. Recommendations for probe design and operation are provided.

Recommended Practice for Use of Emissive Probes in Electric Propulsion Testing

DOE PAGES

Sheehan, J. P.; Raitses, Yevgeny; Hershkowitz, Noah; ...

2016-11-03

Here, this article provides recommended methods for building, operating, and taking plasma potential measurements from electron-emitting probes in electric propulsion devices, including Hall thrusters, gridded ion engines, and others. The two major techniques, the floating point technique and the inflection point technique, are described in detail as well as calibration and error-reduction methods. The major heating methods are described as well as the various considerations for emissive probe construction. Lastly, special considerations for electric propulsion plasmas are addressed, including high-energy densities, ion flows, magnetic fields, and potential fluctuations. Recommendations for probe design and operation are provided.

77 FR 50726 - Software Requirement Specifications for Digital Computer Software and Complex Electronics Used in...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-22

... Computer Software and Complex Electronics Used in Safety Systems of Nuclear Power Plants AGENCY: Nuclear...-1209, ``Software Requirement Specifications for Digital Computer Software and Complex Electronics used... Electronics Engineers (ANSI/IEEE) Standard 830-1998, ``IEEE Recommended Practice for Software Requirements...

29 CFR 1926.602 - Material handling equipment.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... Brake systems for self-propelled rubber-tired off-highway equipment manufactured after January 1, 1972... Engineers Recommended Practices: Self-Propelled Scrapers SAE J319b-1971. Self-Propelled Graders SAE J236... condition. (ii) No employer shall permit earthmoving or compacting equipment which has an obstructed view to...

29 CFR 1926.602 - Material handling equipment.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... Brake systems for self-propelled rubber-tired off-highway equipment manufactured after January 1, 1972... Engineers Recommended Practices: Self-Propelled Scrapers SAE J319b-1971. Self-Propelled Graders SAE J236... condition. (ii) No employer shall permit earthmoving or compacting equipment which has an obstructed view to...

29 CFR 1926.602 - Material handling equipment.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... Brake systems for self-propelled rubber-tired off-highway equipment manufactured after January 1, 1972... Engineers Recommended Practices: Self-Propelled Scrapers SAE J319b-1971. Self-Propelled Graders SAE J236... condition. (ii) No employer shall permit earthmoving or compacting equipment which has an obstructed view to...

Engineering Antimicrobials that are Refractory to Resistance Development.

USDA-ARS?s Scientific Manuscript database

Multi-drug resistant pathogens are a serious problem in modern health care and there is a need for novel antimicrobials that are refractory to resistance development. Several US government agencies (FDA, CDC and NIH) recommend avoiding the use of broad range antimicrobials, a practice that is known...

75 FR 29338 - EPA Board of Scientific Counselors Advisory Board; Notice of Charter Renewal

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-25

... provide advice and recommendations to the Administrator regarding science and engineering research, programs and plans, laboratories, and research- management practices. Inquiries may be directed to Greg... renewal. Notice is hereby given that the Environmental Protection Agency (EPA) has determined that, in...

Environmental Impact Analysis Process. Volume 1

DTIC Science & Technology

1987-04-01

defined in the Society of Automotive Engineers ( SAE ) Aerospace Recommended Practice 865A "Definition and Procedures for Computing the Perceived Noise Level...Chicopee, MA Irving I. Farber 402 Irene Street Chicopee, MA 01020 Mrs. Norma E. Farber 402 Irene Street Chicopee, MA 01020 Maureen Filipe 50 LaBelle

Recommendations to Support Computational Thinking in the Elementary Classroom

ERIC Educational Resources Information Center

Estapa, Anne; Hutchison, Amy; Nadolny, Larysa

2018-01-01

Computational thinking is an important and necessary way of thinking for computer programmers and other professionals in science, technology, engineering, and mathematics (STEM). Research on emerging practices around computational thinking that is developed through coding initiatives in schools reports that elementary children typically learn how…

Guide to data collection

NASA Technical Reports Server (NTRS)

1981-01-01

Guidelines and recommendations are presented for the collection of software development data. Motivation and planning for, and implementation and management of, a data collection effort are discussed. Topics covered include types, sources, and availability of data; methods and costs of data collection; types of analyses supported; and warnings and suggestions based on software engineering laboratory (SEL) experiences. This document is intended as a practical guide for software managers and engineers, abstracted and generalized from 5 years of SEL data collection.

Guidance, Navigation and Control (GN&C): Best Practices for Human-Rated Spacecraft Systems

NASA Technical Reports Server (NTRS)

Lebsock, Ken; West, John

2008-01-01

In 2007 the NESC completed an in-depth assessment to identify, define and document engineering considerations for the Design Development Test and Evaluation (DDT&E) of human-rated spacecraft systems. This study had been requested by the Astronaut Office at JSC to help them to better understand what is required to ensure safe, robust, and reliable human-rated spacecraft systems. The 22 GN&C engineering Best Practices described in this paper are a condensed version of what appears in the NESC Technical Report. These Best Practices cover a broad range from fundamental system architectural considerations to more specific aspects (e.g., stability margin recommendations) of GN&C system design and development. 15 of the Best Practices address the early phases of a GN&C System development project and the remaining 7 deal with the later phases. Some of these Best Practices will cross-over between both phases. We recognize that this set of GN&C Best Practices will not be universally applicable to all projects and mission applications.

40 CFR 1065.1105 - Sampling system design.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Sampling system design. 1065.1105... Compounds § 1065.1105 Sampling system design. (a) General. We recommend that you design your SVOC batch... practical, adjust sampling times based on the emission rate of target analytes from the engine to obtain...

Liquid rocket valve components

NASA Technical Reports Server (NTRS)

1973-01-01

A monograph on valves for use with liquid rocket propellant engines is presented. The configurations of the various types of valves are described and illustrated. Design criteria and recommended practices for the various valves are explained. Tables of data are included to show the chief features of valve components in use on operational vehicles.

75 FR 56477 - Technical Amendments for Marine Spark-Ignition Engines and Vessels

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-16

... spillage, incorporating safe recommended practices will result in a net benefit to the environment and lead... portable fuel tanks to these new requirements, manufacturers working together on systems integration.... We have engaged the industry to identify a simple, safe, and emissions neutral solution to this...

The engineering of construction specifications for externally bonded FRP composites

NASA Astrophysics Data System (ADS)

Yang, Xinbao

This dissertation, consisting of six technical papers, presents the results of research on the theme of developing engineering and the construction specifications for externally bonded FRP composites. For particular, the work focuses on three critical aspects of the performance of FRP systems: fiber misalignment, corner radius, and lap splice length. Based on both experimental and theoretical investigations, the main contribution of this work is the development of recommendations on fiber misalignment limit, minimum corner radius, lap splice length to be used as guidance in the construction practice of FRP strengthening of concrete structures. The first three papers focus on the strength and stiffness degradation of CFRP laminates from fiber misalignment. It was concluded that misalignment affects strength more than stiffness. In practice, when all fibers in a laminate can be regarded as through fibers, it is recommended to use a reduction factor for strength and no reduction factor for stiffness to account for fiber misalignment. Findings from concrete beams strengthened with misaligned CFRP laminates verified these recommendations. The fourth and fifth papers investigate the effect of corner radius on the mechanical properties of CFRP laminates wrapped around a rectangular cross section. A unique reusable test device was fabricated to determine fiber stress and radial stress of CFRP laminates with different corner radii. Comparison performed with finite element analyses shows that the test method and the reusable device were viable and the stress concentration needs to be considered in FRP laminate wrapped corners. A minimum of 1.0 in. corner radius was recommended for practice. The sixth paper summarizes the research on the lap splice length of FRP laminates under static and repeated loads. Although a lap splice length of 1.5 in. is sufficient for CFRP laminates to develop the ultimate static tensile strength, a minimum of 4.0 in. is recommended in order to account for repeated loads.

Elementary teachers' mental models of engineering design processes: A comparison of two communities of practice

NASA Astrophysics Data System (ADS)

McMahon, Ann P.

Educating K-12 students in the processes of design engineering is gaining popularity in public schools. Several states have adopted standards for engineering design despite the fact that no common agreement exists on what should be included in the K-12 engineering design process. Furthermore, little pre-service and in-service professional development exists that will prepare teachers to teach a design process that is fundamentally different from the science teaching process found in typical public schools. This study provides a glimpse into what teachers think happens in engineering design compared to articulated best practices in engineering design. Wenger's communities of practice work and van Dijk's multidisciplinary theory of mental models provide the theoretical bases for comparing the mental models of two groups of elementary teachers (one group that teaches engineering and one that does not) to the mental models of design engineers (including this engineer/researcher/educator and professionals described elsewhere). The elementary school teachers and this engineer/researcher/educator observed the design engineering process enacted by professionals, then answered questions designed to elicit their mental models of the process they saw in terms of how they would teach it to elementary students. The key finding is this: Both groups of teachers embedded the cognitive steps of the design process into the matrix of the social and emotional roles and skills of students. Conversely, the engineers embedded the social and emotional aspects of the design process into the matrix of the cognitive steps of the design process. In other words, teachers' mental models show that they perceive that students' social and emotional communicative roles and skills in the classroom drive their cognitive understandings of the engineering process, while the mental models of this engineer/researcher/educator and the engineers in the video show that we perceive that cognitive understandings of the engineering process drive the social and emotional roles and skills used in that process. This comparison of mental models with the process that professional designers use defines a problem space for future studies that investigate how to incorporate engineering practices into elementary classrooms. Recommendations for engineering curriculum development and teacher professional development based on this study are presented.

Spaced Retrieval Practice Increases College Students' Short- and Long-Term Retention of Mathematics Knowledge

ERIC Educational Resources Information Center

Hopkins, Robin F.; Lyle, Keith B.; Hieb, Jeff L.; Ralston, Patricia A. S.

2016-01-01

A major challenge college students face is retaining the knowledge they acquire in their classes, especially in cumulative disciplines such as engineering, where ultimate success depends on long-term retention of foundational content. Cognitive psychologists have recently recommended various techniques educators might use to increase retention.…

Designing for Success in STEM Communities of Practice: Philosophy and Personal Interactions

ERIC Educational Resources Information Center

Kezar, Adrianna; Gehrke, Sean; Bernstein-Sierra, Samantha

2017-01-01

For the past 20 years, countless reports have been issued calling for reform of undergraduate education to improve student learning, persistence, and graduation rates for students in science, technology, engineering, and mathematics (STEM) majors. However, by many measures, recommendations in these reports have not been widely implemented. While…

A Sensitivity Analysis Comparing Two Procedures for Adjusting As-Measured Spectra to Reference Conditions : SAE ARP 866A vs. ISO 9613-1/ANSI S1.26-1995.

DOT National Transportation Integrated Search

2002-05-01

Two procedures for adjusting as-measured test-day spectra to reference day conditions : the Society of Automotive Engineers (SAE) Aerospace Recommended Practice (ARP) : No. 866A (866A) and a procedure utilizing pure-tone absorption equations, ...

From Evidence to Impact: Recommendations for a Dissemination Support System

ERIC Educational Resources Information Center

Kreuter, Matthew W.; Wang, Monica L.

2015-01-01

While finding effective solutions to child and adolescent health problems is very much a scientific endeavor, getting those solutions into widespread practice largely is not. This paper applies lessons from business and engineering to highlight the shortcomings of current approaches to science translation. In challenging the status quo, the paper…

The effectiveness of AMT investment in UK metal component manufacture

NASA Astrophysics Data System (ADS)

Hamblin, David; Nugent, Edward

1991-11-01

The aim of the research was to investigate the effectiveness of capital investment, particularly investment in Advanced Manufacturing Technology (AMT). AMT encompasses not only production, but also design and administration areas. The intention was to make recommendations for the future direction of investment in the industry. The structure of the industry which comprises 54 companies is outlined. In order to obtain sufficiently detailed and accurate data, each company was visited. Discussions were held with managers covering the areas of production, engineering, finance, design, sales and marketing, quality and other strategic issues affecting investment decision making. The study conclusions and recommendations are presented. An overview of the industry and the survey sample are given. Company performance, practice relationships which link practice, and performance are discussed.

Gender Gap in Science, Technology, Engineering, and Mathematics (STEM): Current Knowledge, Implications for Practice, Policy, and Future Directions

PubMed Central

Degol, Jessica L.

2016-01-01

Although the gender gap in math course-taking and performance has narrowed in recent decades, females continue to be underrepresented in math-intensive fields of Science, Technology, Engineering, and Mathematics (STEM). Career pathways encompass the ability to pursue a career as well as the motivation to employ that ability. Individual differences in cognitive capacity and motivation are also influenced by broader sociocultural factors. After reviewing research from the fields of psychology, sociology, economics, and education over the past 30 years, we summarize six explanations for US women’s underrepresentation in math-intensive STEM fields: (a) cognitive ability, (b) relative cognitive strengths, (c) occupational interests or preferences, (d) lifestyle values or work-family balance preferences, (e) field-specific ability beliefs, and (f) gender-related stereotypes and biases. We then describe the potential biological and sociocultural explanations for observed gender differences on cognitive and motivational factors and demonstrate the developmental period(s) during which each factor becomes most relevant. We then propose evidence-based recommendations for policy and practice to improve STEM diversity and recommendations for future research directions. PMID:28458499

Gender Gap in Science, Technology, Engineering, and Mathematics (STEM): Current Knowledge, Implications for Practice, Policy, and Future Directions.

PubMed

Wang, Ming-Te; Degol, Jessica L

2017-03-01

Although the gender gap in math course-taking and performance has narrowed in recent decades, females continue to be underrepresented in math-intensive fields of Science, Technology, Engineering, and Mathematics (STEM). Career pathways encompass the ability to pursue a career as well as the motivation to employ that ability. Individual differences in cognitive capacity and motivation are also influenced by broader sociocultural factors. After reviewing research from the fields of psychology, sociology, economics, and education over the past 30 years, we summarize six explanations for US women's underrepresentation in math-intensive STEM fields: (a) cognitive ability, (b) relative cognitive strengths, (c) occupational interests or preferences, (d) lifestyle values or work-family balance preferences, (e) field-specific ability beliefs, and (f) gender-related stereotypes and biases. We then describe the potential biological and sociocultural explanations for observed gender differences on cognitive and motivational factors and demonstrate the developmental period(s) during which each factor becomes most relevant. We then propose evidence-based recommendations for policy and practice to improve STEM diversity and recommendations for future research directions.

Impact of Ada and object-oriented design in the flight dynamics division at Goddard Space Flight Center

NASA Technical Reports Server (NTRS)

Waligora, Sharon; Bailey, John; Stark, Mike

1995-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of applications software. The goals of the SEL are (1) to understand the software development process in the GSFC environment; (2) to measure the effects of various methodologies, tools, and models on this process; and (3) to identify and then to apply successful development practices. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Research on numerical simulation and protection of transient process in long-distance slurry transportation pipelines

NASA Astrophysics Data System (ADS)

Lan, G.; Jiang, J.; Li, D. D.; Yi, W. S.; Zhao, Z.; Nie, L. N.

2013-12-01

The calculation of water-hammer pressure phenomenon of single-phase liquid is already more mature for a pipeline of uniform characteristics, but less research has addressed the calculation of slurry water hammer pressure in complex pipelines with slurry flows carrying solid particles. In this paper, based on the developments of slurry pipelines at home and abroad, the fundamental principle and method of numerical simulation of transient processes are presented, and several boundary conditions are given. Through the numerical simulation and analysis of transient processes of a practical engineering of long-distance slurry transportation pipeline system, effective protection measures and operating suggestions are presented. A model for calculating the water impact of solid and fluid phases is established based on a practical engineering of long-distance slurry pipeline transportation system. After performing a numerical simulation of the transient process, analyzing and comparing the results, effective protection measures and operating advice are recommended, which has guiding significance to the design and operating management of practical engineering of longdistance slurry pipeline transportation system.

Guidelines for environmental infection control in health-care facilities. Recommendations of CDC and the Healthcare Infection Control Practices Advisory Committee (HICPAC).

PubMed

Sehulster, Lynne; Chinn, Raymond Y W

2003-06-06

The health-care facility environment is rarely implicated in disease transmission, except among patients who are immunocompromised. Nonetheless, inadvertent exposures to environmental pathogens (e.g., Aspergillus spp. and Legionella spp.) or airborne pathogens (e.g., Mycobacterium tuberculosis and varicella-zoster virus) can result in adverse patient outcomes and cause illness among health-care workers. Environmental infection-control strategies and engineering controls can effectively prevent these infections. The incidence of health-care--associated infections and pseudo-outbreaks can be minimized by 1) appropriate use of cleaners and disinfectants; 2) appropriate maintenance of medical equipment (e.g., automated endoscope reprocessors or hydrotherapy equipment); 3) adherence to water-quality standards for hemodialysis, and to ventilation standards for specialized care environments (e.g., airborne infection isolation rooms, protective environments, or operating rooms); and 4) prompt management of water intrusion into the facility. Routine environmental sampling is not usually advised, except for water quality determinations in hemodialysis settings and other situations where sampling is directed by epidemiologic principles, and results can be applied directly to infection-control decisions. This report reviews previous guidelines and strategies for preventing environment-associated infections in health-care facilities and offers recommendations. These include 1) evidence-based recommendations supported by studies; 2) requirements of federal agencies (e.g., Food and Drug Administration, U.S. Environmental Protection Agency, U.S. Department of Labor, Occupational Safety and Health Administration, and U.S. Department of Justice); 3) guidelines and standards from building and equipment professional organizations (e.g., American Institute of Architects, Association for the Advancement of Medical Instrumentation, and American Society of Heating, Refrigeration, and Air-Conditioning Engineers); 4) recommendations derived from scientific theory or rationale; and 5) experienced opinions based upon infection-control and engineering practices. The report also suggests a series of performance measurements as a means to evaluate infection-control efforts.

Development and Deployment of an Aerospace Recommended Practice (ARP) Compliant Measurement System for nvPM Certification Measurements of Aircraft Engines - Current Status.

NASA Astrophysics Data System (ADS)

Whitefield, P. D.; Hagen, D. E.; Lobo, P.; Miake-Lye, R. C.

2015-12-01

The Society of Automotive Engineers (SAE) Aircraft Exhaust Emissions Measurement Committee (E-31) has published an Aerospace Information Report (AIR) 6241 detailing the sampling system for the measurement of non-volatile particulate matter (nvPM) from aircraft engines (SAE 2013). The system is designed to operate in parallel with existing International Civil Aviation Organization (ICAO) Annex 16 compliant combustion gas sampling systems used for emissions certification from aircraft engines captured by conventional (Annex 16) gas sampling rakes (ICAO, 2008). The SAE E-31 committee is also working to ballot an Aerospace Recommended Practice (ARP) that will provide the methodology and system specification to measure nvPM from aircraft engines. The ARP is currently in preparation and is expected to be ready for ballot in 2015. A prototype AIR-compliant nvPM measurement system - The North American Reference System (NARS) has been built and evaluated at the MSTCOE under the joint sponsorship of the FAA, EPA and Transport Canada. It has been used to validate the performance characteristics of OEM AIR-compliant systems and is being used in engine certification type testing at OEM facilities to obtain data from a set of representative engines in the fleet. The data collected during these tests will be used by ICAO/CAEP/WG3/PMTG to develop a metric on which on the regulation for nvPM emissions will be based. This paper will review the salient features of the NARS including: (1) emissions sample transport from probe tip to the key diagnostic tools, (2) the mass and number-based diagnostic tools for nvPM mass and number concentration measurement and (3) methods employed to assess the extent of nvPM loss throughout the sampling system. This paper will conclude with a discussion of the recent results from inter-comparison studies conducted with other US - based systems that gives credence to the ARP's readiness for ballot.

Aerospace Mechanisms and Tribology Technology: Case Studies

NASA Technical Reports Server (NTRS)

Miyoshi, Kazuhisa

1999-01-01

This chapter focuses attention on tribology technology practice related to vacuum tribology and space tribology. Two case studies describe aspects of real problems in sufficient detail for the engineer and the scientist to understand the tribological situations and the failures. The nature of the problems is analyzed and the range of potential solutions is evaluated. Courses of action are recommended.

Transporting children in wheelchairs in passenger vehicles: a comparison of best practice to observed and reported practice in a pilot sample.

PubMed

Yonkman, Janell; O'Neil, Joseph; Talty, Judith; Bull, Marilyn J

2010-01-01

We compared observed and reported practice among children with special health care needs transported in wheelchairs with the recommendations from the American National Standards Institute/Rehabilitation Engineering and Assistive Technology Society of North America Committee on Wheelchairs and Transportation voluntary standards for best practice for using wheelchairs in vehicles. A convenience sample of vehicles exiting the garage of a children's hospital was observed. Certified child passenger safety technicians gathered driver demographics and the child's reported medical condition, weight, age, clinic visited, and relation to the driver. Technicians observed how the wheelchair and occupant were secured. A sample of 20 vehicles showed that 90% used four-point tie-down systems to secure the wheelchairs. A total of 88% of drivers tied the wheelchairs down correctly; only 20% used a separate lap-shoulder belts to secure the occupants. Twenty-five percent used lap trays, which are not recommended. Fifteen participants traveled with medical equipment secured inappropriately. Many deviations from best practice were observed and highlight areas for increased awareness, education, and resources for caregivers.

Software engineering and Ada (Trademark) training: An implementation model for NASA

NASA Technical Reports Server (NTRS)

Legrand, Sue; Freedman, Glenn

1988-01-01

The choice of Ada for software engineering for projects such as the Space Station has resulted in government and industrial groups considering training programs that help workers become familiar with both a software culture and the intricacies of a new computer language. The questions of how much time it takes to learn software engineering with Ada, how much an organization should invest in such training, and how the training should be structured are considered. Software engineering is an emerging, dynamic discipline. It is defined by the author as the establishment and application of sound engineering environments, tools, methods, models, principles, and concepts combined with appropriate standards, guidelines, and practices to support computing which is correct, modifiable, reliable and safe, efficient, and understandable throughout the life cycle of the application. Neither the training programs needed, nor the content of such programs, have been well established. This study addresses the requirements for training for NASA personnel and recommends an implementation plan. A curriculum and a means of delivery are recommended. It is further suggested that a knowledgeable programmer may be able to learn Ada in 5 days, but that it takes 6 to 9 months to evolve into a software engineer who uses the language correctly and effectively. The curriculum and implementation plan can be adapted for each NASA Center according to the needs dictated by each project.

78 FR 2236 - Federal Motor Vehicle Safety Standards; New Pneumatic Tires for Motor Vehicles With a GVWR of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-10

... Society of Automotive Engineers (SAE) Recommended Practice J918b--Passenger Car Tire Performance Requirements and Test Procedures (January 1967). 2, 3 As part of the strength test, a plunger is driven into a...--Passenger Car Tire Performance Requirements and Test Procedures (January 1967) Section 3.1. \\5\\ FMVSS No...

Engineering bioinformatics: building reliability, performance and productivity into bioinformatics software.

PubMed

Lawlor, Brendan; Walsh, Paul

2015-01-01

There is a lack of software engineering skills in bioinformatic contexts. We discuss the consequences of this lack, examine existing explanations and remedies to the problem, point out their shortcomings, and propose alternatives. Previous analyses of the problem have tended to treat the use of software in scientific contexts as categorically different from the general application of software engineering in commercial settings. In contrast, we describe bioinformatic software engineering as a specialization of general software engineering, and examine how it should be practiced. Specifically, we highlight the difference between programming and software engineering, list elements of the latter and present the results of a survey of bioinformatic practitioners which quantifies the extent to which those elements are employed in bioinformatics. We propose that the ideal way to bring engineering values into research projects is to bring engineers themselves. We identify the role of Bioinformatic Engineer and describe how such a role would work within bioinformatic research teams. We conclude by recommending an educational emphasis on cross-training software engineers into life sciences, and propose research on Domain Specific Languages to facilitate collaboration between engineers and bioinformaticians.

Engineering bioinformatics: building reliability, performance and productivity into bioinformatics software

PubMed Central

Lawlor, Brendan; Walsh, Paul

2015-01-01

There is a lack of software engineering skills in bioinformatic contexts. We discuss the consequences of this lack, examine existing explanations and remedies to the problem, point out their shortcomings, and propose alternatives. Previous analyses of the problem have tended to treat the use of software in scientific contexts as categorically different from the general application of software engineering in commercial settings. In contrast, we describe bioinformatic software engineering as a specialization of general software engineering, and examine how it should be practiced. Specifically, we highlight the difference between programming and software engineering, list elements of the latter and present the results of a survey of bioinformatic practitioners which quantifies the extent to which those elements are employed in bioinformatics. We propose that the ideal way to bring engineering values into research projects is to bring engineers themselves. We identify the role of Bioinformatic Engineer and describe how such a role would work within bioinformatic research teams. We conclude by recommending an educational emphasis on cross-training software engineers into life sciences, and propose research on Domain Specific Languages to facilitate collaboration between engineers and bioinformaticians. PMID:25996054

Probabilistic Requirements (Partial) Verification Methods Best Practices Improvement. Variables Acceptance Sampling Calculators: Empirical Testing. Volume 2

NASA Technical Reports Server (NTRS)

Johnson, Kenneth L.; White, K. Preston, Jr.

2012-01-01

The NASA Engineering and Safety Center was requested to improve on the Best Practices document produced for the NESC assessment, Verification of Probabilistic Requirements for the Constellation Program, by giving a recommended procedure for using acceptance sampling by variables techniques as an alternative to the potentially resource-intensive acceptance sampling by attributes method given in the document. In this paper, the results of empirical tests intended to assess the accuracy of acceptance sampling plan calculators implemented for six variable distributions are presented.

Doctor of nursing practice program development: reengineering health care.

PubMed

Wall, Barbra M; Novak, Julie C; Wilkerson, Sharon A

2005-09-01

In this article, we describe the developmental process of a Doctor of Nursing Practice (DNP) program that uses interdisciplinary resources to create unique DNP curriculum opportunities. Other schools may benefit from this experience in the development of their own DNP programs. The program delivers an innovative curriculum from post-baccalaureate to doctorate, emphasizing health care engineering and interdisciplinary collaboration among faculty, hospitals, community leaders, and policymakers. This DNP program is uniquely situated to provide leadership in solving complex clinical problems through its partnership with the Regenstrief Center for Healthcare Engineering, the School of Pharmacy, the Homeland Security Institute, and the Center on Aging and the Life Course. Doctoral coursework, interdisciplinary collaboration, health care engineering/systems approaches, and new knowledge result in uniquely qualified providers. Post-baccalaureate students complete the university's Adult Nurse Practitioner program or its developing Pediatric Nurse Practitioner program during the first 2 years of the 4-year curriculum. A total of 83 post-baccalaureate credit hours include 1,526 hours of supervised clinical practice, a health policy residency, and cognate residencies in an area of specialization. The seven core competencies recommended by the American Association of Colleges of Nursing are incorporated into the curriculum.

A Glowing Recommendation: A Project-Based Cooperative Laboratory Activity to Promote Use of the Scientific and Engineering Practices

ERIC Educational Resources Information Center

Carmel, Justin H.; Ward, Joseph S.; Cooper, Melanie M.

2017-01-01

One of the most mystifying products on the market for people at any age is the glow stick: a plastic tube that, when snapped, creates a flood of bright, brilliantly colored light without the use of electricity or significant production of heat. In this case, the chemiluminescence reaction also provides an exciting phenomenon through which we can…

Software Engineering Practices: Their Impact on the Design of a Program Maintenance Manual.

DTIC Science & Technology

1982-12-01

listinjs. Myers raef. 18) st at es: Since we already have the zoi?, 1’hYlnot let it SerVe as-he loic documentation? . diin3 ocmtati-)n such as a flowchart ...Recommended Locations for Coiments 1. ht the beginnning of eaz- module lnzlude the module name the current date, the module’sfunction, its’inputs and outputs

Handbook of recommended practices for the determination of liquid monopropellant rocket engine performance

NASA Technical Reports Server (NTRS)

Bjorklund, R. A.; Rogero, R. S.; Baerwald, R. K.

1979-01-01

The design, installation, and operation of systems to be used for directly measuring quantities of fundamental importance to the determination of monopropellant thruster performance is described. Areas covered include: (1) force and impulse measurement; (2) propellant mass usage and flow measurement; (3) pressure measurement; (4) temperature measurement; (5) exhaust gas composition measurement; and (6) data reduction and performance determination.

Exposure control practices for administering nitrous oxide: A survey of dentists, dental hygienists, and dental assistants.

PubMed

Boiano, James M; Steege, Andrea L; Sweeney, Marie H

2017-06-01

Engineering, administrative, and work practice controls have been recommended for many years to minimize exposure to nitrous oxide during dental procedures. To better understand the extent to which these exposure controls are used, the NIOSH Health and Safety Practices Survey of Healthcare Workers was conducted among members of professional practice organizations representing dentists, dental hygienists and dental assistants. The anonymous, modular, web-based survey was completed by 284 dental professionals in private practice who administered nitrous oxide to adult and/or pediatric patients in the seven days prior to the survey. Use of primary engineering controls (i.e., nasal scavenging mask and/or local exhaust ventilation (LEV) near the patient's mouth) was nearly universal, reported by 93% and 96% of respondents who administered to adult (A) and pediatric (P) patients, respectively. However, adherence to other recommended precautionary practices were lacking to varying degrees, and were essentially no different among those administering nitrous oxide to adult or pediatric patients. Examples of work practices which increase exposure risk, expressed as percent of respondents, included: not checking nitrous oxide equipment for leaks (41% A; 48% P); starting nitrous oxide gas flow before delivery mask or airway mask was applied to patient (13% A; 12% P); and not turning off nitrous oxide gas flow before turning off oxygen flow to the patient (8% A; 7% P). Absence of standard procedures to minimize worker exposure to nitrous oxide (13% of all respondents) and not being trained on safe handling and administration of nitrous oxide (3%) were examples of breaches of administrative controls which may also increase exposure risk. Successful management of nitrous oxide emissions should include properly fitted nasal scavenging masks, supplemental LEV (when nitrous oxide levels cannot be adequately controlled using nasal masks alone), adequate general ventilation, regular inspection of nitrous oxide delivery and scavenging equipment for leaks, availability of standard procedures to minimize exposure, periodic training, ambient air and exposure monitoring, and medical surveillance.

Electronic Design Automation: Integrating the Design and Manufacturing Functions

NASA Technical Reports Server (NTRS)

Bachnak, Rafic; Salkowski, Charles

1997-01-01

As the complexity of electronic systems grows, the traditional design practice, a sequential process, is replaced by concurrent design methodologies. A major advantage of concurrent design is that the feedback from software and manufacturing engineers can be easily incorporated into the design. The implementation of concurrent engineering methodologies is greatly facilitated by employing the latest Electronic Design Automation (EDA) tools. These tools offer integrated simulation of the electrical, mechanical, and manufacturing functions and support virtual prototyping, rapid prototyping, and hardware-software co-design. This report presents recommendations for enhancing the electronic design and manufacturing capabilities and procedures at JSC based on a concurrent design methodology that employs EDA tools.

Standing Naval Forces and Global Security

DTIC Science & Technology

1993-06-04

standards an- good engineering practices. The team submits a r:-,cr: to !PPC recommending that the prcject be accepted b NATO. 8. Audit . The...established. A system of common funds and trailing audits must be in effect to pay for the infrastructure. NATO infrastructure appears to be a good example to...Search And Rescue and maritime safety monitor marine polution 6. sharing maritime inteiiigence1 5 Commodore Bateman foresees coupling these activities or

Engineering Quality Software: 10 Recommendations for Improved Software Quality Management

DTIC Science & Technology

2010-04-27

lack of user involvement • Inadequate Software Process Management & Control By Contractors • No “Team” of Vendors and users; little SME participation...1990 Quality Perspectives • Process Quality ( CMMI ) • Product Quality (ISO/IEC 2500x) – Internal Quality Attributes – External Quality Attributes... CMMI /ISO 9000 Assessments – Capture organizational knowledge • Identify best practices, lessons learned Know where you are, and where you need to be

Analysis of small crack behavior for airframe applications

NASA Technical Reports Server (NTRS)

Mcclung, R. C.; Chan, K. S.; Hudak, S. J., Jr.; Davidson, D. L.

1994-01-01

The small fatigue crack problem is critically reviewed from the perspective of airframe applications. Different types of small cracks-microstructural, mechanical, and chemical-are carefully defined and relevant mechanisms identified. Appropriate analysis techniques, including both rigorous scientific and practical engineering treatments, are briefly described. Important materials data issues are addressed, including increased scatter in small crack data and recommended small crack test methods. Key problems requiring further study are highlighted.

"Think different": a qualitative assessment of commercial innovation for diabetes information technology programs.

PubMed

Rupcic, Sonia; Tamrat, Tigest; Kachnowski, Stan

2012-11-01

This study reviews the state of diabetes information technology (IT) initiatives and presents a set of recommendations for improvement based on interviews with commercial IT innovators. Semistructured interviews were conducted with 10 technology developers, representing 12 of the most successful IT companies in the world. Average interview time was approximately 45 min. Interviews were audio-recorded, transcribed, and entered into ATLAS.ti for qualitative data analysis. Themes were identified through a process of selective and open coding by three researchers. We identified two practices, common among successful IT companies, that have allowed them to avoid or surmount the challenges that confront healthcare professionals involved in diabetes IT development: (1) employing a diverse research team of software developers and engineers, statisticians, consumers, and business people and (2) conducting rigorous research and analytics on technology use and user preferences. Because of the nature of their respective fields, healthcare professionals and commercial innovators face different constraints. With these in mind we present three recommendations, informed by practices shared by successful commercial developers, for those involved in developing diabetes IT programming: (1) include software engineers on the implementation team throughout the intervention, (2) conduct more extensive baseline testing of users and monitor the usage data derived from the technology itself, and (3) pursue Institutional Review Board-exempt research.

78 FR 53773 - Select Updates for Non-Clinical Engineering Tests and Recommended Labeling for Intravascular...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-30

...] Select Updates for Non-Clinical Engineering Tests and Recommended Labeling for Intravascular Stents and... Engineering Tests and Recommended Labeling for Intravascular Stents and Associated Delivery Systems.'' FDA has developed this guidance to inform the coronary and peripheral stent industry about selected updates to FDA's...

Long-term health experience of jet engine manufacturing workers: VII: occupational exposures.

PubMed

Kennedy, Kathleen J; Esmen, Nurtan A; Hancock, Roger P; Lacey, Steven E; Marsh, Gary M; Buchanich, Jeanine M; Youk, Ada O

2013-06-01

To reconstruct agent-specific occupational exposures for a cohort of jet engine manufacturing workers for use in an epidemiological mortality study. Potential chemical and physical exposures at eight jet engine manufacturing and overhaul/repair plants were evaluated for the period 1952 to 2001. Eleven agents were selected for detailed examination, and a job-exposure matrix was constructed. Quantitative exposure estimates were generated for metalworking fluids, nickel, cobalt, chromium, solvents, and incomplete combustion aerosol from metalworking fluids. Qualitative exposure estimates were assigned for ionizing radiation, electromagnetic fields, polychlorinated biphenyls, and lead-cadmium. All exposures showed decreasing trends over the study period. The quantitative exposure levels generated in this study were lower than early contemporaneous professional practice recommendations and were similar to or lower than published data from other industries.

Software architecture and engineering for patient records: current and future.

PubMed

Weng, Chunhua; Levine, Betty A; Mun, Seong K

2009-05-01

During the "The National Forum on the Future of the Defense Health Information System," a track focusing on "Systems Architecture and Software Engineering" included eight presenters. These presenters identified three key areas of interest in this field, which include the need for open enterprise architecture and a federated database design, net centrality based on service-oriented architecture, and the need for focus on software usability and reusability. The eight panelists provided recommendations related to the suitability of service-oriented architecture and the enabling technologies of grid computing and Web 2.0 for building health services research centers and federated data warehouses to facilitate large-scale collaborative health care and research. Finally, they discussed the need to leverage industry best practices for software engineering to facilitate rapid software development, testing, and deployment.

Computer systems and software engineering

NASA Technical Reports Server (NTRS)

Mckay, Charles W.

1988-01-01

The High Technologies Laboratory (HTL) was established in the fall of 1982 at the University of Houston Clear Lake. Research conducted at the High Tech Lab is focused upon computer systems and software engineering. There is a strong emphasis on the interrelationship of these areas of technology and the United States' space program. In Jan. of 1987, NASA Headquarters announced the formation of its first research center dedicated to software engineering. Operated by the High Tech Lab, the Software Engineering Research Center (SERC) was formed at the University of Houston Clear Lake. The High Tech Lab/Software Engineering Research Center promotes cooperative research among government, industry, and academia to advance the edge-of-knowledge and the state-of-the-practice in key topics of computer systems and software engineering which are critical to NASA. The center also recommends appropriate actions, guidelines, standards, and policies to NASA in matters pertinent to the center's research. Results of the research conducted at the High Tech Lab/Software Engineering Research Center have given direction to many decisions made by NASA concerning the Space Station Program.

Verification of Decision-Analytic Models for Health Economic Evaluations: An Overview.

PubMed

Dasbach, Erik J; Elbasha, Elamin H

2017-07-01

Decision-analytic models for cost-effectiveness analysis are developed in a variety of software packages where the accuracy of the computer code is seldom verified. Although modeling guidelines recommend using state-of-the-art quality assurance and control methods for software engineering to verify models, the fields of pharmacoeconomics and health technology assessment (HTA) have yet to establish and adopt guidance on how to verify health and economic models. The objective of this paper is to introduce to our field the variety of methods the software engineering field uses to verify that software performs as expected. We identify how many of these methods can be incorporated in the development process of decision-analytic models in order to reduce errors and increase transparency. Given the breadth of methods used in software engineering, we recommend a more in-depth initiative to be undertaken (e.g., by an ISPOR-SMDM Task Force) to define the best practices for model verification in our field and to accelerate adoption. Establishing a general guidance for verifying models will benefit the pharmacoeconomics and HTA communities by increasing accuracy of computer programming, transparency, accessibility, sharing, understandability, and trust of models.

Engineering Manpower and Engineering Education in New York State: A Report and Recommendations for Action.

ERIC Educational Resources Information Center

Diamond, Celia B.

Data related to current and recent engineering manpower demand, engineering degrees and enrollments, supply and demand projections for engineering manpower, and results of an April 1982 survey of New York's engineering schools are presented and discussed in separate sections of this report. Based on these data, nine recommendations for the future…

Model Based Mission Assurance in a Model Based Systems Engineering (MBSE) Framework: State-of-the-Art Assessment

NASA Technical Reports Server (NTRS)

Cornford, Steven L.; Feather, Martin S.

2016-01-01

This report explores the current state of the art of Safety and Mission Assurance (S&MA) in projects that have shifted towards Model Based Systems Engineering (MBSE). Its goal is to provide insight into how NASA's Office of Safety and Mission Assurance (OSMA) should respond to this shift. In MBSE, systems engineering information is organized and represented in models: rigorous computer-based representations, which collectively make many activities easier to perform, less error prone, and scalable. S&MA practices must shift accordingly. The "Objective Structure Hierarchies" recently developed by OSMA provide the framework for understanding this shift. Although the objectives themselves will remain constant, S&MA practices (activities, processes, tools) to achieve them are subject to change. This report presents insights derived from literature studies and interviews. The literature studies gleaned assurance implications from reports of space-related applications of MBSE. The interviews with knowledgeable S&MA and MBSE personnel discovered concerns and ideas for how assurance may adapt. Preliminary findings and observations are presented on the state of practice of S&MA with respect to MBSE, how it is already changing, and how it is likely to change further. Finally, recommendations are provided on how to foster the evolution of S&MA to best fit with MBSE.

Recommended approach to software development, revision 3

NASA Technical Reports Server (NTRS)

Landis, Linda; Waligora, Sharon; Mcgarry, Frank; Pajerski, Rose; Stark, Mike; Johnson, Kevin Orlin; Cover, Donna

1992-01-01

Guidelines for an organized, disciplined approach to software development that is based on studies conducted by the Software Engineering Laboratory (SEL) since 1976 are presented. It describes methods and practices for each phase of a software development life cycle that starts with requirements definition and ends with acceptance testing. For each defined life cycle phase, guidelines for the development process and its management, and for the products produced and their reviews are presented.

Recommended system of application and development

NASA Astrophysics Data System (ADS)

Wang, Wei

2018-04-01

A recommender system is a project that helps users identify their wishes and needs. The recommender system has been successfully applied to many e-commerce environments, such as news, film, music, books and other areas of recommendation. This paper mainly discusses the application of recommendation technology in software engineering, data and knowledge engineering, configurable projects and persuasion technology, and summarizes the development trend of recommendation technology in the future.

HVAC--the importance of clean intake section and dry air filter in cold climate.

PubMed

Hanssen, S O

2004-01-01

HVAC systems, if properly designed, installed, operated and maintained, will improve thermal conditions and air quality indoors. However, the success strongly depends on the design of the system and the quality of the components we use in our HVAC installations. Regrettably, several investigations have revealed that many HVAC installations have a lot of operational and maintenance problems, especially related to moisture, rain and snow entrainment. In short, it seems that too little attention is placed on the design of the intake section, despite the fact that there exists a large number of national and international guidelines and recommendations. This is a serious problem because the air intake is the initial component of the ventilation plant and as such the first line of defense against debris and other outdoor air pollutants. Unfortunately, the design is often an argued compromise between the architect, the civil engineer and the HVAC engineer. In the future, the technical, hygienic and microbiological feature of air intakes must be better ensured in order to avoid the air intake becoming a risk component as regards contamination and indoor air quality. Further, it seems that the magnitude of the problem is not well known, or recognized, by the building designers, engineers and professionals involved in the construction and operation of buildings. This fact needs to be addressed more seriously, because obviously there is a big difference between the idealistic architectonic design, engineering intentions and the real life situation. Several practical recommendations for design and operation of HVAC systems are presented. Following the recommendations will result in less pollution from the HVAC-system and increased indoor environmental quality.

Probabilistic framework for product design optimization and risk management

NASA Astrophysics Data System (ADS)

Keski-Rahkonen, J. K.

2018-05-01

Probabilistic methods have gradually gained ground within engineering practices but currently it is still the industry standard to use deterministic safety margin approaches to dimensioning components and qualitative methods to manage product risks. These methods are suitable for baseline design work but quantitative risk management and product reliability optimization require more advanced predictive approaches. Ample research has been published on how to predict failure probabilities for mechanical components and furthermore to optimize reliability through life cycle cost analysis. This paper reviews the literature for existing methods and tries to harness their best features and simplify the process to be applicable in practical engineering work. Recommended process applies Monte Carlo method on top of load-resistance models to estimate failure probabilities. Furthermore, it adds on existing literature by introducing a practical framework to use probabilistic models in quantitative risk management and product life cycle costs optimization. The main focus is on mechanical failure modes due to the well-developed methods used to predict these types of failures. However, the same framework can be applied on any type of failure mode as long as predictive models can be developed.

Students' perceptions of the relevance of mathematics in engineering

NASA Astrophysics Data System (ADS)

Flegg, Jennifer; Mallet, Dann; Lupton, Mandy

2012-09-01

In this article, we report on the findings of an exploratory study into the experience of students as they learn first year engineering mathematics. Here we define engineering as the application of mathematics and sciences to the building and design of projects for the use of society [M. Kirschenman and B. Brenner, Education for Civil Engineering: A Profession of Practice, Leader. Manag. Eng. 10 (2010), p. 54]. Qualitative and quantitative data on students' views of the relevance of their mathematics study to their engineering studies and future careers in engineering was collected. The students described using a range of mathematics techniques (mathematics skills developed, mathematics concepts applied to engineering and skills developed relevant for engineering) for various usages (as a subject of study, a tool for other subjects or a tool for real world problems). We found a number of themes relating to the design of engineering mathematics curriculum emerged from the data. These included the relevance of mathematics within different engineering majors, the relevance of mathematics to future studies, the relevance of learning mathematical rigour and the effectiveness of problem-solving tasks in conveying the relevance of mathematics more effectively than other forms of assessment. We make recommendations for the design of engineering mathematics curriculum based on our findings.

Demand for interdisciplinary laboratories for physiology research by undergraduate students in biosciences and biomedical engineering.

PubMed

Clase, Kari L; Hein, Patrick W; Pelaez, Nancy J

2008-12-01

Physiology as a discipline is uniquely positioned to engage undergraduate students in interdisciplinary research in response to the 2006-2011 National Science Foundation Strategic Plan call for innovative transformational research, which emphasizes multidisciplinary projects. To prepare undergraduates for careers that cross disciplinary boundaries, students need to practice interdisciplinary communication in academic programs that connect students in diverse disciplines. This report surveys policy documents relevant to this emphasis on interdisciplinary training and suggests a changing role for physiology courses in bioscience and engineering programs. A role for a physiology course is increasingly recommended for engineering programs, but the study of physiology from an engineering perspective might differ from the study of physiology as a basic science. Indeed, physiology laboratory courses provide an arena where biomedical engineering and bioscience students can apply knowledge from both fields while cooperating in multidisciplinary teams under specified technical constraints. Because different problem-solving approaches are used by students of engineering and bioscience, instructional innovations are needed to break down stereotypes between the disciplines and create an educational environment where interdisciplinary teamwork is used to bridge differences.

Web survey data collection and retrieval to plan teleradiology implementation

NASA Astrophysics Data System (ADS)

Alaoui, Adil; Collmann, Jeff R.; Johnson, Jeffrey A.; Lindisch, David; Nguyen, Dan; Mun, Seong K.

2003-05-01

This case study details the experience of system engineers of the Imaging Science and Information Systems Center, Georgetown University Medical Center (ISIS) and radiologists from the department of Radiology in the implementation of a new Teleradiology system. The Teleradiology system enables radiologists to view medical images from remote sites under those circumstances where a resident radiologist needs assistance in evaluating the images after hours and during weekends; it also enables clinicians access to patients" medical images from different workstations within the hospital. The Implementation of the Teleradiology project was preceded by an evaluation phase to perform testing, gather users feedback using a web site and collect information that helped eliminate system bugs, complete recommendations regarding minimum hardware configuration and bandwidth and enhance system"s functions, this phase included a survey-based system assessment of computer configurations, Internet connections, problem identification, and recommendations for improvement, and a testing period with 2 radiologists and ISIS engineers; The second phase was designed to launch the system and make it available to all attending radiologists in the department. To accomplish the first phase of the project a web site was designed and ASP pages were created to enable users to securely logon and enter feedback and recommendations into an SQL database. This efficient, accurate data flow alleviated networking, software and hardware problems. Corrective recommendations were immediately forwarded to the software vendor. The vendor responded with software updates that better met the needs of the radiologists. The ISIS Center completed recommendations for minimum hardware and bandwidth requirements. This experience illustrates that the approach used in collecting the data and facilitating the teamwork between the system engineers and radiologists was instrumental in the project"s success. Major problems with the Teleradiology system were discovered and remedied early by linking the actual practice experience of the physicians to the system improvements.

Safety and health in the construction of fixed offshore installations in the petroleum industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-01-01

A meeting convened by the ILO (International Labor Office) on safety problems in the offshore petroleum industry recommended the preparation of a code of practice setting out standards for safety and health during the construction of fixed offshore installations. Such a code, to be prepared by the ILO in co-operation with other bodies, including the Inter-Governmental Maritime Consultative Organisation (IMCO), was to take into consideration existing standards applicable to offshore construction activities and to supplement the ILO codes of practice on safety and health in building and civil engineering work, shipbuilding and ship repairing. (Copyright (c) International Labour Organisation 1981.)

76 FR 4138 - Committee on Equal Opportunity in Science and Engineering Solicitation of Recommendations for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-24

... NATIONAL SCIENCE FOUNDATION Committee on Equal Opportunity in Science and Engineering Solicitation... recommendations for membership on the Committee on Equal Opportunities in Science and Engineering (CEOSE) (1173... provides advice to NSF on the implementation of the provisions of the Science and Engineering Equal...

Changes in crash risk following re-timing of traffic signal change intervals.

PubMed

Retting, Richard A; Chapline, Janella F; Williams, Allan F

2002-03-01

More than I million motor vehicle crashes occur annually at signalized intersections in the USA. The principal method used to prevent crashes associated with routine changes in signal indications is employment of a traffic signal change interval--a brief yellow and all-red period that follows the green indication. No universal practice exists for selecting the duration of change intervals, and little is known about the influence of the duration of the change interval on crash risk. The purpose of this study was to estimate potential crash effects of modifying the duration of traffic signal change intervals to conform with values associated with a proposed recommended practice published by the Institute of Transportation Engineers. A sample of 122 intersections was identified and randomly assigned to experimental and control groups. Of 51 eligible experimental sites, 40 (78%) needed signal timing changes. For the 3-year period following implementation of signal timing changes, there was an 8% reduction in reportable crashes at experimental sites relative to those occurring at control sites (P = 0.08). For injury crashes, a 12% reduction at experimental sites relative to those occurring at control sites was found (P = 0.03). Pedestrian and bicycle crashes at experimental sites decreased 37% (P = 0.03) relative to controls. Given these results and the relatively low cost of re-timing traffic signals, modifying the duration of traffic signal change intervals to conform with values associated with the Institute of Transportation Engineers' proposed recommended practice should be strongly considered by transportation agencies to reduce the frequency of urban motor vehicle crashes.

Engineering a Healthier Watershed: Middle School Students Use Engineering Design to Lessen the Impact of Their Campus' Impervious Surfaces on Their Local Watershed

NASA Astrophysics Data System (ADS)

Gardner, Elizabeth Claire

It is important that students understand not only how their local watershed functions, but also how it is being impacted by impervious surfaces. Additionally, students need experience exploring the scientific and engineering practices that are necessary for a strong STEM background. With this knowledge students can be empowered to tackle this real and local problem using engineering design, a powerful practice gaining momentum and clarity through its prominence in the recent Framework for K-12 Science Education. Twenty classes of suburban sixth-graders participated in a new five-week Watershed Engineering Design Unit taught by their regular science teachers. Students engaged in scientific inquiry to learn about the structure, function, and health of their local watersheds, focusing on the effects of impervious surfaces. In small groups, students used the engineering design process to propose solutions to lessen the impact of runoff from their school campuses. The goal of this evaluation was to determine the effectiveness of the curriculum in terms of student gains in understanding of (1) watershed function, (2) the impact of impervious surfaces, and (3) the engineering design process. To determine the impact of this curriculum on their learning, students took multiple-choice pre- and post-assessments made up of items covering the three categories above. This data was analyzed for statistical significance using a lower-tailed paired sample t-test. All three objectives showed statistically significant learning gains and the results were used to recommend improvements to the curriculum and the assessment instrument for future iterations.

Civil Engineering Corrosion Control. Volume 3. Cathodic Protection Design

DTIC Science & Technology

1975-02-01

coatings, test stations bonds, and insulation. It is certainly not a "cure-all Its economics and feasibility mus’ always be carefully studied .. An in...General Description of Cathodic Protection. Cath- odic protection, as the name signifies, is the process by which an entire surface is transformed into a...The National Asaoeiation of Corrosion Enguler "I i ,.I-11 Standard RP-Ol-69, "Recommended Practice Por ront.ol ol." Ex - ternal Corrosion on

Workshop I: Gender Studies

NASA Astrophysics Data System (ADS)

Hennessey, Eden; Kurup, Anitha; Meza-Montes, Lilia; Shastri, Prajval; Ghose, Shohini

2015-12-01

Participants in the Gender Studies workshop of the 5th IUPAP International Conference on Women in Physics discussed the gender question in science practice from a policy perspective, informed by investigations from the social science disciplines. The workshop's three sessions—"Equity and Education: Examining Gender Stigma in Science," "A Comparative Study of Women Scientists and Engineers: Experiences in India and the US," and "Toward Gender Equity Through Policy: Characterizing the Social Impact of Interventions—are summarized, and the resulting recommendations presented.

Industry-wide studies report of an industrial-hygiene survey of Riverside Manor Nursing and Rehabilitation Center, Newcomerstown, Ohio. [Ethylene oxide exposures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ringenburg, V.L.; Molina, D.; Elliott, L.J.

Occupational exposure of workers to ethylene oxide (EtO) was examined. Two of six side-by-side short-term personal breathing-zone (BZ) exposure levels, determined while the sterilizer operator unloaded the EtO sterilizer unit, exceeded NIOSH recommended short term levels of 5 parts per million (ppm) for any 10-minute period per workday. Three of 12 personal BZ exposure levels exceeded the NIOSH recommended standard of less than 0.1ppm for an 8-hour time-weighted average. Measurable levels of EtO, ranging from 0.18 to 14.5ppm were detected in the storage room where the EtO sterilized items were aerated. The authors conclude that EtO exposure potential at themore » nursing and rehabilitation center could be reduced by improving administrative controls, work practices, and engineering controls. Recommended improvements were given.« less

Environmental practices for biomedical research facilities.

PubMed Central

Medlin, E L; Grupenhoff, J T

2000-01-01

As a result of the Leadership Conference on Biomedical Research and the Environment, the Facilities Committee focused its work on the development of best environmental practices at biomedical research facilities at the university and independent research facility level as well as consideration of potential involvement of for-profit companies and government agencies. The designation "facilities" includes all related buildings and grounds, "green auditing" of buildings and programs, purchasing of furnishings and sources, energy efficiency, and engineering services (lighting, heating, air conditioning), among other activities. The committee made a number of recommendations, including development of a national council for environmental stewardship in biomedical research, development of a system of green auditing of such research facilities, and creation of programs for sustainable building and use. In addition, the committee recommended extension of education and training programs for environmental stewardship, in cooperation with facilities managers, for all research administrators and researchers. These programs would focus especially on graduate fellows and other students, as well as on science labs at levels K--12. PMID:11121360

Effects of organizational safety practices and perceived safety climate on PPE usage, engineering controls, and adverse events involving liquid antineoplastic drugs among nurses.

PubMed

DeJoy, David M; Smith, Todd D; Woldu, Henok; Dyal, Mari-Amanda; Steege, Andrea L; Boiano, James M

2017-07-01

Antineoplastic drugs pose risks to the healthcare workers who handle them. This fact notwithstanding, adherence to safe handling guidelines remains inconsistent and often poor. This study examined the effects of pertinent organizational safety practices and perceived safety climate on the use of personal protective equipment, engineering controls, and adverse events (spill/leak or skin contact) involving liquid antineoplastic drugs. Data for this study came from the 2011 National Institute for Occupational Safety and Health (NIOSH) Health and Safety Practices Survey of Healthcare Workers which included a sample of approximately 1,800 nurses who had administered liquid antineoplastic drugs during the past seven days. Regression modeling was used to examine predictors of personal protective equipment use, engineering controls, and adverse events involving antineoplastic drugs. Approximately 14% of nurses reported experiencing an adverse event while administering antineoplastic drugs during the previous week. Usage of recommended engineering controls and personal protective equipment was quite variable. Usage of both was better in non-profit and government settings, when workers were more familiar with safe handling guidelines, and when perceived management commitment to safety was higher. Usage was poorer in the absence of specific safety handling procedures. The odds of adverse events increased with number of antineoplastic drugs treatments and when antineoplastic drugs were administered more days of the week. The odds of such events were significantly lower when the use of engineering controls and personal protective equipment was greater and when more precautionary measures were in place. Greater levels of management commitment to safety and perceived risk were also related to lower odds of adverse events. These results point to the value of implementing a comprehensive health and safety program that utilizes available hazard controls and effectively communicates and demonstrates the importance of safe handling practices. Such actions also contribute to creating a positive safety climate.

Performance deterioration based on existing (historical) data; JT9D jet engine diagnostics program

NASA Technical Reports Server (NTRS)

Sallee, G. P.

1978-01-01

The results of the collection and analysis of historical data pertaining to the deterioration of JT9D engine performance are presented. The results of analyses of prerepair and postrepair engine test stand performance data from a number of airlines to establish the individual as well as average losses in engine performance with respect to service use are included. Analysis of the changes in mechanical condition of parts, obtained by inspection of used gas-path parts of varying age, allowed preliminary assessments of component performance deterioration levels and identification of the causitive factors. These component performance estimates, refined by data from special engine back-to-back testing related to module performance restoration, permitted the development of preliminary models of engine component/module performance deterioration with respect to usage. The preliminary assessment of the causes of module performance deterioration and the trends with usage are explained, along with the role each module plays in overall engine performance deterioration. Preliminary recommendations with respect to operating and maintenance practices which could be adopted to control the level of performance deterioration are presented. The needs for additional component sensitivity testing as well as outstanding issues are discussed.

A Decision Fusion Framework for Treatment Recommendation Systems.

PubMed

Mei, Jing; Liu, Haifeng; Li, Xiang; Xie, Guotong; Yu, Yiqin

2015-01-01

Treatment recommendation is a nontrivial task--it requires not only domain knowledge from evidence-based medicine, but also data insights from descriptive, predictive and prescriptive analysis. A single treatment recommendation system is usually trained or modeled with a limited (size or quality) source. This paper proposes a decision fusion framework, combining both knowledge-driven and data-driven decision engines for treatment recommendation. End users (e.g. using the clinician workstation or mobile apps) could have a comprehensive view of various engines' opinions, as well as the final decision after fusion. For implementation, we leverage several well-known fusion algorithms, such as decision templates and meta classifiers (of logistic and SVM, etc.). Using an outcome-driven evaluation metric, we compare the fusion engine with base engines, and our experimental results show that decision fusion is a promising way towards a more valuable treatment recommendation.

Searching for 'Unknown Unknowns'

NASA Technical Reports Server (NTRS)

Parsons, Vickie S.

2005-01-01

The NASA Engineering and Safety Center (NESC) was established to improve safety through engineering excellence within NASA programs and projects. As part of this goal, methods are being investigated to enable the NESC to become proactive in identifying areas that may be precursors to future problems. The goal is to find unknown indicators of future problems, not to duplicate the program-specific trending efforts. The data that is critical for detecting these indicators exist in a plethora of dissimilar non-conformance and other databases (without a common format or taxonomy). In fact, much of the data is unstructured text. However, one common database is not required if the right standards and electronic tools are employed. Electronic data mining is a particularly promising tool for this effort into unsupervised learning of common factors. This work in progress began with a systematic evaluation of available data mining software packages, based on documented decision techniques using weighted criteria. The four packages, which were perceived to have the most promise for NASA applications, are being benchmarked and evaluated by independent contractors. Preliminary recommendations for "best practices" in data mining and trending are provided. Final results and recommendations should be available in the Fall 2005. This critical first step in identifying "unknown unknowns" before they become problems is applicable to any set of engineering or programmatic data.

A Call for Action to Improve Occupational Health and Safety in Ghana and a Critical Look at the Existing Legal Requirement and Legislation

PubMed Central

Annan, Joe-Steve; Addai, Emmanuel K.; Tulashie, Samuel K.

2015-01-01

Occupational health and safety (OHS) is a broad field of professional practice, which involves specialists from different disciplines including but not limited to engineers, occupational health physicians, physical and biological scientists, economists, and statisticians. The preventive systems required to ensure workers are protected from injuries and illnesses dwell heavily on engineers; however, the extent to which the engineer can go regarding planning and implementing preventive measures is dependent on specific legal requirements, leadership commitment from the company, organization, and nation. The objective of this paper is to identify the areas of opportunities for improvements in OHS management in Ghana with regard to the nation's legal requirements, commitment of the Ghana government, and Ghanaian leadership as well as appropriate structuring of Ghanaian institutions responsible for monitoring and managing OHS in Ghana. This paper identified Ghana's fragmented legal requirements concerning OHS, which are under different jurisdictions with unclear responsibilities and accountabilities. The paper also highlights the training needs of Ghanaian academic institutions regarding OHS. Among other recommendations made including structuring of Ghanaian institutions to manage OHS in line with the ILO-OSH 2001, this paper aligns the recommendations with the articles and elements of International Labour Organization convention number 155 and OHSAS 18001 elements. PMID:26106516

Developing IVHM Requirements for Aerospace Systems

NASA Technical Reports Server (NTRS)

Rajamani, Ravi; Saxena, Abhinav; Kramer, Frank; Augustin, Mike; Schroeder, John B.; Goebel, Kai; Shao, Ginger; Roychoudhury, Indranil; Lin, Wei

2013-01-01

The term Integrated Vehicle Health Management (IVHM) describes a set of capabilities that enable sustainable and safe operation of components and subsystems within aerospace platforms. However, very little guidance exists for the systems engineering aspects of design with IVHM in mind. It is probably because of this that designers have to use knowledge picked up exclusively by experience rather than by established process. This motivated a group of leading IVHM practitioners within the aerospace industry under the aegis of SAE's HM-1 technical committee to author a document that hopes to give working engineers and program managers clear guidance on all the elements of IVHM that they need to consider before designing a system. This proposed recommended practice (ARP6883 [1]) will describe all the steps of requirements generation and management as it applies to IVHM systems, and demonstrate these with a "real-world" example related to designing a landing gear system. The team hopes that this paper and presentation will help start a dialog with the larger aerospace community and that the feedback can be used to improve the ARP and subsequently the practice of IVHM from a systems engineering point-of-view.

40 CFR 80.572 - What labeling requirements apply to retailers and wholesale purchaser-consumers of Motor Vehicle...

Code of Federal Regulations, 2013 CFR

2013-07-01

... engines. Recommended for use in all diesel vehicles and engines. (b) From June 1, 2010, through September... and later nonroad diesel engines. Recommended for use in all other non-highway diesel engines. WARNING... retailers and wholesale purchaser-consumers of Motor Vehicle, NR, LM and NRLM diesel fuel and heating oil...

40 CFR 80.572 - What labeling requirements apply to retailers and wholesale purchaser-consumers of Motor Vehicle...

Code of Federal Regulations, 2014 CFR

2014-07-01

... engines. Recommended for use in all diesel vehicles and engines. (b) From June 1, 2010, through September... and later nonroad diesel engines. Recommended for use in all other non-highway diesel engines. WARNING... retailers and wholesale purchaser-consumers of Motor Vehicle, NR, LM and NRLM diesel fuel and heating oil...

Korean Clinical Practice Guidelines for Aneurysmal Subarachnoid Hemorrhage

PubMed Central

Cho, Won-Sang; Park, Sukh Que; Ko, Jun Kyeung; Kim, Dae-Won; Park, Jung Cheol; Yeon, Je Young; Chung, Seung Young; Chung, Joonho; Joo, Sung-Pil; Hwang, Gyojun; Kim, Deog Young; Chang, Won Hyuk; Choi, Kyu-Sun; Lee, Sung Ho; Sheen, Seung Hun; Kang, Hyun-Seung; Kim, Byung Moon; Bae, Hee-Joon; Oh, Chang Wan; Park, Hyeon Seon

2018-01-01

Despite advancements in treating ruptured cerebral aneurysms, an aneurysmal subarachnoid hemorrhage (aSAH) is still a grave cerebrovascular disease associated with a high rate of morbidity and mortality. Based on the literature published to date, worldwide academic and governmental committees have developed clinical practice guidelines (CPGs) to propose standards for disease management in order to achieve the best treatment outcomes for aSAHs. In 2013, the Korean Society of Cerebrovascular Surgeons issued a Korean version of the CPGs for aSAHs. The group researched all articles and major foreign CPGs published in English until December 2015 using several search engines. Based on these articles, levels of evidence and grades of recommendations were determined by our society as well as by other related Quality Control Committees from neurointervention, neurology and rehabilitation medicine. The Korean version of the CPGs for aSAHs includes risk factors, diagnosis, initial management, medical and surgical management to prevent rebleeding, management of delayed cerebral ischemia and vasospasm, treatment of hydrocephalus, treatment of medical complications and early rehabilitation. The CPGs are not the absolute standard but are the present reference as the evidence is still incomplete, each environment of clinical practice is different, and there is a high probability of variation in the current recommendations. The CPGs will be useful in the fields of clinical practice and research. PMID:29526058

Royal Australian and New Zealand College of Psychiatrists clinical practice guideline for the management of deliberate self-harm.

PubMed

Carter, Gregory; Page, Andrew; Large, Matthew; Hetrick, Sarah; Milner, Allison Joy; Bendit, Nick; Walton, Carla; Draper, Brian; Hazell, Philip; Fortune, Sarah; Burns, Jane; Patton, George; Lawrence, Mark; Dadd, Lawrence; Robinson, Jo; Christensen, Helen

2016-10-01

To provide guidance for the organisation and delivery of clinical services and the clinical management of patients who deliberately self-harm, based on scientific evidence supplemented by expert clinical consensus and expressed as recommendations. Articles and information were sourced from search engines including PubMed, EMBASE, MEDLINE and PsycINFO for several systematic reviews, which were supplemented by literature known to the deliberate self-harm working group, and from published systematic reviews and guidelines for deliberate self-harm. Information was reviewed by members of the deliberate self-harm working group, and findings were then formulated into consensus-based recommendations and clinical guidance. The guidelines were subjected to successive consultation and external review involving expert and clinical advisors, the public, key stakeholders, professional bodies and specialist groups with interest and expertise in deliberate self-harm. The Royal Australian and New Zealand College of Psychiatrists clinical practice guidelines for deliberate self-harm provide up-to-date guidance and advice regarding the management of deliberate self-harm patients, which is informed by evidence and clinical experience. The clinical practice guidelines for deliberate self-harm is intended for clinical use and service development by psychiatrists, psychologists, physicians and others with an interest in mental health care. The clinical practice guidelines for deliberate self-harm address self-harm within specific population sub-groups and provide up-to-date recommendations and guidance within an evidence-based framework, supplemented by expert clinical consensus. © The Royal Australian and New Zealand College of Psychiatrists 2016.

Requirements engineering for cross-sectional information chain models

PubMed Central

Hübner, U; Cruel, E; Gök, M; Garthaus, M; Zimansky, M; Remmers, H; Rienhoff, O

2012-01-01

Despite the wealth of literature on requirements engineering, little is known about engineering very generic, innovative and emerging requirements, such as those for cross-sectional information chains. The IKM health project aims at building information chain reference models for the care of patients with chronic wounds, cancer-related pain and back pain. Our question therefore was how to appropriately capture information and process requirements that are both generally applicable and practically useful. To this end, we started with recommendations from clinical guidelines and put them up for discussion in Delphi surveys and expert interviews. Despite the heterogeneity we encountered in all three methods, it was possible to obtain requirements suitable for building reference models. We evaluated three modelling languages and then chose to write the models in UML (class and activity diagrams). On the basis of the current project results, the pros and cons of our approach are discussed. PMID:24199080

Translating Vision into Design: A Method for Conceptual Design Development

NASA Technical Reports Server (NTRS)

Carpenter, Joyce E.

2003-01-01

One of the most challenging tasks for engineers is the definition of design solutions that will satisfy high-level strategic visions and objectives. Even more challenging is the need to demonstrate how a particular design solution supports the high-level vision. This paper describes a process and set of system engineering tools that have been used at the Johnson Space Center to analyze and decompose high-level objectives for future human missions into design requirements that can be used to develop alternative concepts for vehicles, habitats, and other systems. Analysis and design studies of alternative concepts and approaches are used to develop recommendations for strategic investments in research and technology that support the NASA Integrated Space Plan. In addition to a description of system engineering tools, this paper includes a discussion of collaborative design practices for human exploration mission architecture studies used at the Johnson Space Center.

Recent trends for practical rehabilitation robotics, current challenges and the future.

PubMed

Yakub, Fitri; Md Khudzari, Ahmad Zahran; Mori, Yasuchika

2014-03-01

This paper presents and studies various selected literature primarily from conference proceedings, journals and clinical tests of the robotic, mechatronics, neurology and biomedical engineering of rehabilitation robotic systems. The present paper focuses of three main categories: types of rehabilitation robots, key technologies with current issues and future challenges. Literature on fundamental research with some examples from commercialized robots and new robot development projects related to rehabilitation are introduced. Most of the commercialized robots presented in this paper are well known especially to robotics engineers and scholars in the robotic field, but are less known to humanities scholars. The field of rehabilitation robot research is expanding; in light of this, some of the current issues and future challenges in rehabilitation robot engineering are recalled, examined and clarified with future directions. This paper is concluded with some recommendations with respect to rehabilitation robots.

Humanitarian engineering placements in our own communities

NASA Astrophysics Data System (ADS)

VanderSteen, J. D. J.; Hall, K. R.; Baillie, C. A.

2010-05-01

There is an increasing interest in the humanitarian engineering curriculum, and a service-learning placement could be an important component of such a curriculum. International placements offer some important pedagogical advantages, but also have some practical and ethical limitations. Local community-based placements have the potential to be transformative for both the student and the community, although this potential is not always seen. In order to investigate the role of local placements, qualitative research interviews were conducted. Thirty-two semi-structured research interviews were conducted and analysed, resulting in a distinct outcome space. It is concluded that local humanitarian engineering placements greatly complement international placements and are strongly recommended if international placements are conducted. More importantly it is seen that we are better suited to address the marginalised in our own community, although it is often easier to see the needs of an outside populace.

40 CFR 90.703 - Production line testing by the manufacturer.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Manufacturers of small SI engines shall test production line engines from each engine family according to the... recommended to the ultimate purchaser, unless otherwise specified by the Administrator. The Administrator may specify values within or without the range recommended to the ultimate purchaser. ...

Decision problems in management of construction projects

NASA Astrophysics Data System (ADS)

Szafranko, E.

2017-10-01

In a construction business, one must oftentimes make decisions during all stages of a building process, from planning a new construction project through its execution to the stage of using a ready structure. As a rule, the decision making process is made more complicated due to certain conditions specific for civil engineering. With such diverse decision situations, it is recommended to apply various decision making support methods. Both, literature and hands-on experience suggest several methods based on analytical and computational procedures, some less and some more complex. This article presents the methods which can be helpful in supporting decision making processes in the management of civil engineering projects. These are multi-criteria methods, such as MCE, AHP or indicator methods. Because the methods have different advantages and disadvantages, whereas decision situations have their own specific nature, a brief summary of the methods alongside some recommendations regarding their practical applications has been given at the end of the paper. The main aim of this article is to review the methods of decision support and their analysis for possible use in the construction industry.

Limitations and information needs for engineered nanomaterial-specific exposure estimation and scenarios: recommendations for improved reporting practices

NASA Astrophysics Data System (ADS)

Clark, Katherine; van Tongeren, Martie; Christensen, Frans M.; Brouwer, Derk; Nowack, Bernd; Gottschalk, Fadri; Micheletti, Christian; Schmid, Kaspar; Gerritsen, Rianda; Aitken, Rob; Vaquero, Celina; Gkanis, Vasileios; Housiadas, Christos; de Ipiña, Jesús María López; Riediker, Michael

2012-09-01

The aim of this paper is to describe the process and challenges in building exposure scenarios for engineered nanomaterials (ENM), using an exposure scenario format similar to that used for the European Chemicals regulation (REACH). Over 60 exposure scenarios were developed based on information from publicly available sources (literature, books, and reports), publicly available exposure estimation models, occupational sampling campaign data from partnering institutions, and industrial partners regarding their own facilities. The primary focus was on carbon-based nanomaterials, nano-silver (nano-Ag) and nano-titanium dioxide (nano-TiO2), and included occupational and consumer uses of these materials with consideration of the associated environmental release. The process of building exposure scenarios illustrated the availability and limitations of existing information and exposure assessment tools for characterizing exposure to ENM, particularly as it relates to risk assessment. This article describes the gaps in the information reviewed, recommends future areas of ENM exposure research, and proposes types of information that should, at a minimum, be included when reporting the results of such research, so that the information is useful in a wider context.

Training for spacecraft technical analysts

NASA Technical Reports Server (NTRS)

Ayres, Thomas J.; Bryant, Larry

1989-01-01

Deep space missions such as Voyager rely upon a large team of expert analysts who monitor activity in the various engineering subsystems of the spacecraft and plan operations. Senior teammembers generally come from the spacecraft designers, and new analysts receive on-the-job training. Neither of these methods will suffice for the creation of a new team in the middle of a mission, which may be the situation during the Magellan mission. New approaches are recommended, including electronic documentation, explicit cognitive modeling, and coached practice with archived data.

Measures and metrics for software development

NASA Technical Reports Server (NTRS)

1984-01-01

The evaluations of and recommendations for the use of software development measures based on the practical and analytical experience of the Software Engineering Laboratory are discussed. The basic concepts of measurement and system of classification for measures are described. The principal classes of measures defined are explicit, analytic, and subjective. Some of the major software measurement schemes appearing in the literature are derived. The applications of specific measures in a production environment are explained. These applications include prediction and planning, review and assessment, and evaluation and selection.

Profile of software engineering within the National Aeronautics and Space Administration (NASA)

NASA Technical Reports Server (NTRS)

Sinclair, Craig C.; Jeletic, Kellyann F.

1994-01-01

This paper presents findings of baselining activities being performed to characterize software practices within the National Aeronautics and Space Administration. It describes how such baseline findings might be used to focus software process improvement activities. Finally, based on the findings to date, it presents specific recommendations in focusing future NASA software process improvement efforts. The findings presented in this paper are based on data gathered and analyzed to date. As such, the quantitative data presented in this paper are preliminary in nature.

Human Factors Interface with Systems Engineering for NASA Human Spaceflights

NASA Technical Reports Server (NTRS)

Wong, Douglas T.

2009-01-01

This paper summarizes the past and present successes of the Habitability and Human Factors Branch (HHFB) at NASA Johnson Space Center s Space Life Sciences Directorate (SLSD) in including the Human-As-A-System (HAAS) model in many NASA programs and what steps to be taken to integrate the Human-Centered Design Philosophy (HCDP) into NASA s Systems Engineering (SE) process. The HAAS model stresses systems are ultimately designed for the humans; the humans should therefore be considered as a system within the systems. Therefore, the model places strong emphasis on human factors engineering. Since 1987, the HHFB has been engaging with many major NASA programs with much success. The HHFB helped create the NASA Standard 3000 (a human factors engineering practice guide) and the Human Systems Integration Requirements document. These efforts resulted in the HAAS model being included in many NASA programs. As an example, the HAAS model has been successfully introduced into the programmatic and systems engineering structures of the International Space Station Program (ISSP). Success in the ISSP caused other NASA programs to recognize the importance of the HAAS concept. Also due to this success, the HHFB helped update NASA s Systems Engineering Handbook in December 2007 to include HAAS as a recommended practice. Nonetheless, the HAAS model has yet to become an integral part of the NASA SE process. Besides continuing in integrating HAAS into current and future NASA programs, the HHFB will investigate incorporating the Human-Centered Design Philosophy (HCDP) into the NASA SE Handbook. The HCDP goes further than the HAAS model by emphasizing a holistic and iterative human-centered systems design concept.

Experiences of engineering Grid-based medical software.

PubMed

Estrella, F; Hauer, T; McClatchey, R; Odeh, M; Rogulin, D; Solomonides, T

2007-08-01

Grid-based technologies are emerging as potential solutions for managing and collaborating distributed resources in the biomedical domain. Few examples exist, however, of successful implementations of Grid-enabled medical systems and even fewer have been deployed for evaluation in practice. The objective of this paper is to evaluate the use in clinical practice of a Grid-based imaging prototype and to establish directions for engineering future medical Grid developments and their subsequent deployment. The MammoGrid project has deployed a prototype system for clinicians using the Grid as its information infrastructure. To assist in the specification of the system requirements (and for the first time in healthgrid applications), use-case modelling has been carried out in close collaboration with clinicians and radiologists who had no prior experience of this modelling technique. A critical qualitative and, where possible, quantitative analysis of the MammoGrid prototype is presented leading to a set of recommendations from the delivery of the first deployed Grid-based medical imaging application. We report critically on the application of software engineering techniques in the specification and implementation of the MammoGrid project and show that use-case modelling is a suitable vehicle for representing medical requirements and for communicating effectively with the clinical community. This paper also discusses the practical advantages and limitations of applying the Grid to real-life clinical applications and presents the consequent lessons learned. The work presented in this paper demonstrates that given suitable commitment from collaborating radiologists it is practical to deploy in practice medical imaging analysis applications using the Grid but that standardization in and stability of the Grid software is a necessary pre-requisite for successful healthgrids. The MammoGrid prototype has therefore paved the way for further advanced Grid-based deployments in the medical and biomedical domains.

The flying classroom - a cost effective integrated approach to learning and teaching flight dynamics

NASA Astrophysics Data System (ADS)

Bromfield, Michael A.; Belberov, Aleksandar

2017-11-01

In the UK, the Royal Aeronautical Society recommends the inclusion of practical flight exercises for accredited undergraduate aerospace engineering programmes to enhance learning and student experience. The majority of academic institutions teaching aerospace in the UK separate the theory and practice of flight dynamics with students attending a series of lectures supplemented by an intensive one-day flight exercise. Performance and/or handling qualities flight tests are performed in a dedicated aircraft fitted with specialist equipment for the recording and presentation of flight data. This paper describes an innovative approach to better integrate theory and practice and the use of portable Commercial-off-The-Shelf (COTS) technologies to enable a range of standard, unmodified aircraft to be used. The integration of theory and practice has enriched learning and teaching, improved coursework grades and the student experience. The use of COTS and unmodified aircraft has reduced costs and enabled increased student participation.

Health hazard evaluation report heta 92-0160-2360, City of Lancaster, Division of Fire, Lancaster, Ohio

DOE Office of Scientific and Technical Information (OSTI.GOV)

Echt, A.; Blade, L.; Sheehy, J.

1993-10-01

In response to a request from the Division of Fire and the International Association of Firefighters Local 291, an evaluation was undertaken of exposure to diesel exhaust emissions in the engine houses of the City of Lancaster Division of Fire (SIC-9224) Lancaster, Ohio. At the time of the study, 77 uniformed employees and two secretaries worked in three engine houses. In Engine House 1, personal breathing zone (PBZ) samples ranged from 51.7 to 71.2 micrograms per cubic meter (microg/cu m) on the first night of sampling. PBZ samples in Engine House 2 ranged from 25.7 to 78.8 microg/cu m overmore » two nights of sampling. Results for Engine House 3 ranged from 24.0 to 60.5 microg/cu m. With the exception of one measurement of 4.6 parts per million (ppm) of carbon-monoxide (CO) measured in the smoking room of Engine House 2, only trace CO was detected. Benzene solubles measured in Engine House 2 ranged from less than the limit of detection to 313 microg/cu m. The authors conclude that exhaust emissions containing diesel particulate may present a potential risk to firefighters. The authors recommend the use of engineering controls and work practices to reduce diesel exhaust emission exposures.« less

Evaluation of heat engine for hybrid vehicle application

NASA Technical Reports Server (NTRS)

Schneider, H. W.

1984-01-01

The status of ongoing heat-engine developments, including spark-ignition, compression-ignition, internal-combustion, and external-combustion engines is presented. The potential of engine concepts under consideration for hybrid vehicle use is evaluated, using self-imposed criteria for selection. The deficiencies of the engines currently being evaluated in hybrid vehicles are discussed. Focus is on recent research with two-stroke, rotary, and free-piston engines. It is concluded that these engine concepts have the most promising potential for future application in hybrid vehicles. Recommendations are made for analysis and experimentation to evaluate stop-start and transient emission behavior of recommended engine concepts.

Concept and Practice of Teaching Technical University Students to Modern Technologies of 3d Data Acquisition and Processing: a Case Study of Close-Range Photogrammetry and Terrestrial Laser Scanning

NASA Astrophysics Data System (ADS)

Kravchenko, Iulia; Luhmann, Thomas; Shults, Roman

2016-06-01

For the preparation of modern specialists in the acquisition and processing of three-dimensional data, a broad and detailed study of related modern methods and technologies is necessary. One of the most progressive and effective methods of acquisition and analyzing spatial data is terrestrial laser scanning. The study of methods and technologies for terrestrial laser scanning is of great importance not only for GIS specialists, but also for surveying engineers who make decisions in traditional engineering tasks (monitoring, executive surveys, etc.). The understanding and formation of the right approach in preparing new professionals need to develop a modern and variable educational program. This educational program must provide effective practical and laboratory work and the student's coursework. The resulting knowledge of the study should form the basis for practical or research of young engineers. In 2014, the Institute of Applied Sciences (Jade University Oldenburg, Germany) and Kyiv National University of Construction and Architecture (Kiev, Ukraine) had launched a joint educational project for the introduction of terrestrial laser scanning technology for collection and processing of spatial data. As a result of this project practical recommendations have been developed for the organization of educational processes in the use of terrestrial laser scanning. An advanced project-oriented educational program was developed which is presented in this paper. In order to demonstrate the effectiveness of the program a 3D model of the big and complex main campus of Kyiv National University of Construction and Architecture has been generated.

Recommendations to Improve Employee Thermal Comfort When Working in 40°F Refrigerated Cold Rooms.

PubMed

Ceballos, Diana; Mead, Kenneth; Ramsey, Jessica

2015-01-01

Cold rooms are commonly used for food storage and preparation, and are usually kept around 40°F following food safety guidelines. Some food preparation employees may spend 8 or more hours inside cold rooms. These employees may not be aware of the risks associated with mildly cold temperatures, dampness, and limited ventilation. We performed an evaluation of cold rooms at an airline catering facility because of concerns with exposure to cold temperatures. We spoke with and observed employees in two cold rooms, reviewed daily temperature logs, evaluated employee's physical activity, work/rest schedule, and protective clothing. We measured temperature, percent relative humidity, and air velocities at different work stations inside the cold rooms. We concluded that thermal comfort concerns perceived by cold room employees may have been the result of air drafts at their workstations, insufficient use of personal protective equipment due to dexterity concerns, work practices, and lack of knowledge about good health and safety practices in cold rooms. These moderately cold work conditions with low air velocities are not well covered in current occupational health and safety guidelines, and wind chill calculations do not apply. We provide practical recommendations to improve thermal comfort of cold room employees. Engineering control recommendations include the redesigning of air deflectors and installing of suspended baffles. Administrative controls include the changing out of wet clothing, providing hand warmers outside of cold rooms, and educating employees on cold stress. We also recommended providing more options on personal protective equipment. However, there is a need for guidelines and educational materials tailored to employees in moderately cold environments to improve thermal comfort and minimize health and safety problems.

Recommendations to Improve Employee Thermal Comfort When Working in 40°F Refrigerated Cold Rooms

PubMed Central

Ceballos, Diana; Mead, Kenneth; Ramsey, Jessica

2015-01-01

Cold rooms are commonly used for food storage and preparation, and are usually kept around 40°F following food safety guidelines. Some food preparation employees may spend 8 or more hours inside cold rooms. These employees may not be aware of the risks associated with mildly cold temperatures, dampness, and limited ventilation. We performed an evaluation of cold rooms at an airline catering facility because of concerns with exposure to cold temperatures. We spoke with and observed employees in two cold rooms, reviewed daily temperature logs, evaluated employee’s physical activity, work/rest schedule, and protective clothing. We measured temperature, percent relative humidity, and air velocities at different work stations inside the cold rooms. We concluded that thermal comfort concerns perceived by cold room employees may have been the result of air drafts at their workstations, insufficient use of personal protective equipment due to dexterity concerns, work practices, and lack of knowledge about good health and safety practices in cold rooms. These moderately cold work conditions with low air velocities are not well covered in current occupational health and safety guidelines, and wind chill calculations do not apply. We provide practical recommendations to improve thermal comfort of cold room employees. Engineering control recommendations include the redesigning of air deflectors and installing of suspended baffles. Administrative controls include the changing out of wet clothing, providing hand warmers outside of cold rooms, and educating employees on cold stress. We also recommended providing more options on personal protective equipment. However, there is a need for guidelines and educational materials tailored to employees in moderately cold environments to improve thermal comfort and minimize health and safety problems. PMID:25961447

The Japanese Clinical Practice Guidelines for Management of Sepsis and Septic Shock 2016 (J-SSCG 2016).

PubMed

Nishida, Osamu; Ogura, Hiroshi; Egi, Moritoki; Fujishima, Seitaro; Hayashi, Yoshiro; Iba, Toshiaki; Imaizumi, Hitoshi; Inoue, Shigeaki; Kakihana, Yasuyuki; Kotani, Joji; Kushimoto, Shigeki; Masuda, Yoshiki; Matsuda, Naoyuki; Matsushima, Asako; Nakada, Taka-Aki; Nakagawa, Satoshi; Nunomiya, Shin; Sadahiro, Tomohito; Shime, Nobuaki; Yatabe, Tomoaki; Hara, Yoshitaka; Hayashida, Kei; Kondo, Yutaka; Sumi, Yuka; Yasuda, Hideto; Aoyama, Kazuyoshi; Azuhata, Takeo; Doi, Kent; Doi, Matsuyuki; Fujimura, Naoyuki; Fuke, Ryota; Fukuda, Tatsuma; Goto, Koji; Hasegawa, Ryuichi; Hashimoto, Satoru; Hatakeyama, Junji; Hayakawa, Mineji; Hifumi, Toru; Higashibeppu, Naoki; Hirai, Katsuki; Hirose, Tomoya; Ide, Kentaro; Kaizuka, Yasuo; Kan'o, Tomomichi; Kawasaki, Tatsuya; Kuroda, Hiromitsu; Matsuda, Akihisa; Matsumoto, Shotaro; Nagae, Masaharu; Onodera, Mutsuo; Ohnuma, Tetsu; Oshima, Kiyohiro; Saito, Nobuyuki; Sakamoto, So; Sakuraya, Masaaki; Sasano, Mikio; Sato, Norio; Sawamura, Atsushi; Shimizu, Kentaro; Shirai, Kunihiro; Takei, Tetsuhiro; Takeuchi, Muneyuki; Takimoto, Kohei; Taniguchi, Takumi; Tatsumi, Hiroomi; Tsuruta, Ryosuke; Yama, Naoya; Yamakawa, Kazuma; Yamashita, Chizuru; Yamashita, Kazuto; Yoshida, Takeshi; Tanaka, Hiroshi; Oda, Shigeto

2018-01-01

The Japanese Clinical Practice Guidelines for Management of Sepsis and Septic Shock 2016 (J-SSCG 2016), a Japanese-specific set of clinical practice guidelines for sepsis and septic shock created jointly by the Japanese Society of Intensive Care Medicine and the Japanese Association for Acute Medicine, was first released in February 2017 in Japanese. An English-language version of these guidelines was created based on the contents of the original Japanese-language version. Members of the Japanese Society of Intensive Care Medicine and the Japanese Association for Acute Medicine were selected and organized into 19 committee members and 52 working group members. The guidelines were prepared in accordance with the Medical Information Network Distribution Service (Minds) creation procedures. The Academic Guidelines Promotion Team was organized to oversee and provide academic support to the respective activities allocated to each Guideline Creation Team. To improve quality assurance and workflow transparency, a mutual peer review system was established, and discussions within each team were open to the public. Public comments were collected once after the initial formulation of a clinical question (CQ), and twice during the review of the final draft. Recommendations were determined to have been adopted after obtaining support from a two-thirds (>66.6%) majority vote of each of the 19 committee members. A total of 87 CQs were selected among 19 clinical areas, including pediatric topics and several other important areas not covered in the first edition of the Japanese guidelines (J-SSCG 2012). The approval rate obtained through committee voting, in addition to ratings of the strengths of the recommendation and its supporting evidence were also added to each recommendation statement. We conducted meta-analyses for 29 CQs. Thirty seven CQs contained recommendations in the form of an expert consensus due to insufficient evidence. No recommendations were provided for 5 CQs. Based on the evidence gathered, we were able to formulate Japanese-specific clinical practice guidelines that are tailored to the Japanese context in a highly transparent manner. These guidelines can easily be used not only by specialists, but also by non-specialists, general clinicians, nurses, pharmacists, clinical engineers, and other healthcare professionals.

Using knowledge of agricultural practices to enhance through-the-season interpretation of Landsat data

NASA Technical Reports Server (NTRS)

Malila, W. A.; Pestre, C. R.

1984-01-01

Landsat data contain features that can be interpreted to produce information about crops, in support of crop estimation procedures. This paper considers ways in which detailed knowledge of agricultural practices and events might increase and improve the utilization of Landsat data in both the predictive and observational or measurement components of such procedures. Landsat observables related to agricultural practices and events throughout the cropping season are listed. Agricultural fields are identified as the preferred observational units for incorporating refined agricultural understanding, such as crop rotation patterns, into machine procedures. Uses of Landsat data from both prior seasons and the current season are considered, as is use of predictive models of crop appearance. The investigation of knowledge engineering systems tailored to through-the-season estimation problems is recommended for long range development.

Ligand binding assays in the 21st century laboratory: recommendations for characterization and supply of critical reagents.

PubMed

O'Hara, Denise M; Theobald, Valerie; Egan, Adrienne Clements; Usansky, Joel; Krishna, Murli; TerWee, Julie; Maia, Mauricio; Spriggs, Frank P; Kenney, John; Safavi, Afshin; Keefe, Jeannine

2012-06-01

Critical reagents are essential components of ligand binding assays (LBAs) and are utilized throughout the process of drug discovery, development, and post-marketing monitoring. Successful lifecycle management of LBA critical reagents minimizes assay performance problems caused by declining reagent activity and can mitigate the risk of delays during preclinical and clinical studies. Proactive reagent management assures adequate supply. It also assures that the quality of critical reagents is appropriate and consistent for the intended LBA use throughout all stages of the drug development process. This manuscript summarizes the key considerations for the generation, production, characterization, qualification, documentation, and management of critical reagents in LBAs, with recommendations for antibodies (monoclonal and polyclonal), engineered proteins, peptides, and their conjugates. Recommendations are given for each reagent type on basic and optional characterization profiles, expiration dates and storage temperatures, and investment in a knowledge database system. These recommendations represent a consensus among the authors and should be used to assist bioanalytical laboratories in the implementation of a best practices program for critical reagent life cycle management.

Study for Agricultural Engineering Development in Brazil. Summary Report of Joint Study Group on Agricultural Engineering in Brazil (July 24-August 12, 1972).

ERIC Educational Resources Information Center

National Academy of Sciences, Washington, DC.

The joint study group was established to identify the most urgent research and training needs in agricultural engineering in Brazil and to recommend how best to meet those needs. Specific recommendations are given for a long-term program to establish quality programs in education and research in agricultural engineering in Brazil and means to gain…

An examination of variables which influence high school students to enroll in an undergraduate engineering or physical science major

NASA Astrophysics Data System (ADS)

Porter, Christopher H.

The purpose of this study was to examine the variables which influence a high school student to enroll in an engineering discipline versus a physical science discipline. Data was collected utilizing the High School Activities, Characteristics, and Influences Survey, which was administered to students who were freshmen in an engineering or physical science major at an institution in the Southeastern United States. A total of 413 students participated in the survey. Collected data were analyzed using descriptive statistics, two-sample Wilcoxon tests, and binomial logistic regression techniques. A total of 29 variables were deemed significant between the general engineering and physical science students. The 29 significant variables were further analyzed to see which have an independent impact on a student to enroll in an undergraduate engineering program, as opposed to an undergraduate physical science program. Four statistically significant variables were found to have an impact on a student's decision to enroll in a engineering undergraduate program versus a physical science program: father's influence, participation in Project Lead the Way, and the subjects of mathematics and physics. Recommendations for theory, policy, and practice were discussed based on the results of the study. This study presented suggestions for developing ways to attract, educate, and move future engineers into the workforce.

49 CFR Appendix E to Part 240 - Recommended Procedures for Conducting Skill Performance Tests

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Recommended Procedures for Conducting Skill... LOCOMOTIVE ENGINEERS Pt. 240, App. E Appendix E to Part 240—Recommended Procedures for Conducting Skill Performance Tests FRA requires (see § 240.127 and § 240.211) that locomotive engineers be given a skill...

Instructional design considerations promoting engineering design self-efficacy

NASA Astrophysics Data System (ADS)

Jackson, Andrew M.

Engineering design activities are frequently included in technology and engineering classrooms. These activities provide an open-ended context for practicing critical thinking, problem solving, creativity, and innovation---collectively part of the 21st Century Skills which are increasingly needed for success in the workplace. Self-efficacy is a perceptual belief that impacts learning and behavior. It has been shown to directly impact each of these 21st Century Skills but its relation to engineering design is only recently being studied. The purpose of this study was to examine how instructional considerations made when implementing engineering design activities might affect student self-efficacy outcomes in a middle school engineering classroom. Student responses to two self-efficacy inventories related to design, the Engineering Design Self-Efficacy Instrument and Creative Thinking Self-Efficacy Inventory, were collected before and after participation in an engineering design curriculum. Students were also answered questions on specific factors of their experience during the curriculum which teachers may exhibit control over: teamwork and feedback. Results were analyzed using Pearson's correlation coefficients, paired and independent t-tests, and structural equation modeling to better understand patterns for self-efficacy beliefs in students. Results suggested that design self-efficacy and creative thinking self-efficacy are significantly correlated, r(1541) = .783, p < .001, and increased following participation in a design curriculum, M diff = 1.32, t(133) = 7.60, p < .001 and Mdiff = 0.79, t(124) = 4.19, p < .001 respectively. Structural models also showed that students perceive team inclusion and feedback as significant contributors to their self-efficacy beliefs, while team diversity was not related to self-efficacy. Separate models for each predictor demonstrated good fit. Recommendations are made based on the corresponding nature of engineering design self-efficacy and creative thinking self-efficacy: strategies encouraging self-efficacy in these domains may be transferrable. Instructors are made aware of the significant impact of classroom strategies for increasing self-efficacy and given specific recommendations related to teamwork and feedback to support students. Finally, although there were weaknesses in the study related to the survey administration, future research opportunities are presented which may build from this work.

JPL Thermal Design Modeling Philosophy and NASA-STD-7009 Standard for Models and Simulations - A Case Study

NASA Technical Reports Server (NTRS)

Avila, Arturo

2011-01-01

The Standard JPL thermal engineering practice prescribes worst-case methodologies for design. In this process, environmental and key uncertain thermal parameters (e.g., thermal blanket performance, interface conductance, optical properties) are stacked in a worst case fashion to yield the most hot- or cold-biased temperature. Thus, these simulations would represent the upper and lower bounds. This, effectively, represents JPL thermal design margin philosophy. Uncertainty in the margins and the absolute temperatures is usually estimated by sensitivity analyses and/or by comparing the worst-case results with "expected" results. Applicability of the analytical model for specific design purposes along with any temperature requirement violations are documented in peer and project design review material. In 2008, NASA released NASA-STD-7009, Standard for Models and Simulations. The scope of this standard covers the development and maintenance of models, the operation of simulations, the analysis of the results, training, recommended practices, the assessment of the Modeling and Simulation (M&S) credibility, and the reporting of the M&S results. The Mars Exploration Rover (MER) project thermal control system M&S activity was chosen as a case study determining whether JPL practice is in line with the standard and to identify areas of non-compliance. This paper summarizes the results and makes recommendations regarding the application of this standard to JPL thermal M&S practices.

Heat stress intervention research in construction: gaps and recommendations.

PubMed

Yang, Yang; Chan, Albert Ping-Chuen

2017-06-08

Developing heat stress interventions for construction workers has received mounting concerns in recent years. However, limited efforts have been exerted to elaborate the rationale, methodology, and practicality of heat stress intervention in the construction industry. This study aims to review previous heat stress intervention research in construction, to identify the major research gaps in methodological issues, and to offer detailed recommendations for future studies. A total of 35 peer-reviewed journal papers have been identified to develop administrative, environmental or personal engineering interventions to safeguard construction workers. It was found that methodological limitations, such as arbitrary sampling methods and unreliable instruments, could be the major obstacle in undertaking heat stress intervention research. To bridge the identified research gaps, this study then refined a research framework for conducting heat stress intervention studies in the construction industry. The proposed research strategy provides researchers and practitioners with fresh insights into expanding multidisciplinary research areas and solving practical problems in the management of heat stress. The proposed research framework may foster the development of heat stress intervention research in construction, which further aids researchers, practitioners, and policymakers in formulating proper intervention strategies.

Implications of the Next Generation Science Standards for Earth and Space Sciences

NASA Astrophysics Data System (ADS)

Wysession, M. E.; Colson, M.; Duschl, R. A.; Huff, K.; Lopez, R. E.; Messina, P.; Speranza, P.; Matthews, T.; Childress, J.

2012-12-01

The Next Generation Science Standards (NGSS), due to be released in 2013, set a new direction for K-12 science education in America. These standards will put forth significant changes for Earth and space sciences. The NGSS are based upon the recommendations of the National Research Council's 2011 report "A Framework for K-12 Science Education: Practices, Cross-Cutting Concepts, and Core Ideas." The standards are being written by a large group of authors who represent many different constituencies, including 26 participating states, in a process led by Achieve, Inc. The standards encourage innovative ways to teach science at the K-12 level, including enhanced integration between the content, practices, and crosscutting ideas of science and greater assimilation among the sciences and engineering, and among the sciences, mathematics, and English language arts. The NGSS presents a greater emphasis on Earth and space sciences than in previous standards, recommending a year at both the middle and high school levels. The new standards also present a greater emphasis on areas of direct impact between humans and the Earth system, including climate change, natural hazards, resource management, and sustainability.

Linear elastic fracture mechanics primer

NASA Technical Reports Server (NTRS)

Wilson, Christopher D.

1992-01-01

This primer is intended to remove the blackbox perception of fracture mechanics computer software by structural engineers. The fundamental concepts of linear elastic fracture mechanics are presented with emphasis on the practical application of fracture mechanics to real problems. Numerous rules of thumb are provided. Recommended texts for additional reading, and a discussion of the significance of fracture mechanics in structural design are given. Griffith's criterion for crack extension, Irwin's elastic stress field near the crack tip, and the influence of small-scale plasticity are discussed. Common stress intensities factor solutions and methods for determining them are included. Fracture toughness and subcritical crack growth are discussed. The application of fracture mechanics to damage tolerance and fracture control is discussed. Several example problems and a practice set of problems are given.

Allergy-immunology practice parameters and strength of recommendation data: an evolutionary perspective.

PubMed

Park, Matthew H; Banks, Taylor A; Nelson, Michael R

2016-03-01

The practice parameters for allergy and immunology (A/I) are a valuable tool guiding practitioners' clinical practice. The A/I practice parameters have evolved over time in the context of evidence-based medicine milestones. To identify evolutionary trends in the character, scope, and evidence underlying recommendations in the A/I practice parameters. Practice parameters that have guided A/I from 1995 through 2014 were analyzed. Statements and recommendations with strength of recommendation categories A and B were considered to have a basis in evidence from controlled trials. Forty-three publications and updates covering 25 unique topics were identified. There was great variability in the number of recommendations made and the proportion of statements with controlled trial evidence. The mean number of recommendations made per practice parameter has decreased significantly, from 95.8 to a mean of 38.3. There also is a trend toward an increased proportion of recommendations based on controlled trial evidence in practice parameters with fewer recommendations, with a mean of 30.7% in practice parameters with at least 100 recommendations based on controlled trial evidence compared with 48.3% in practice parameters with 30 to 100 recommendations and 51.0% in those with fewer than 30 recommendations. The A/I practice parameters have evolved significantly over time. Encouragingly, greater controlled trial evidence is associated with updated practice parameters and a recent trend of more narrowly focused topics. These findings should only bolster and inspire confidence in the utility of the A/I practice parameters in assisting practitioners to navigate through the uncertainty that is intrinsic to medicine in making informed decisions with patients. Published by Elsevier Inc.

Analysis and implementation of PM sampling methodology protocols to aid in the development of an ARP (aerospace recommended practice) for aircraft non-volatile PM measurements

NASA Astrophysics Data System (ADS)

Catron, Brian Lowell

Due to the growing concerns that particulate matter (PM) have on health and the environment, there is a need to include mass and number non-volatile PM measurements to current jet engine certification. This thesis looks at the necessary work required to help produce recommendations and perform background research to aid in the creation of an improved Aerospace Recommended Practice (ARP) (by the SAE E-31 Committee). This work addressed the following issues. The investigation began in the Missouri S&T Center of Excellence for Aerospace Particulate Emissions Reduction Research (COE) laboratory with an examination of the jet engine surrogate used, the miniCAST, as well as integrating it into the COE's PM measurement system. A clean PM sample line was aged by running a PM source through it until a steady state signal was measured by the instruments in order to make a recommended procedure for line conditioning as well as reconditioning. Several eductors were studied for their performance characteristics and compared against desired characteristics, which suggested a need to include a pressure relief valve to cap the sample pressure at the eductor entrance. A volatile particle remover (VPR) was studied for penetration and ability to remove volatile material. A prototype E-31 system was setup at the second alternative aviation fuel experiment (AAFEX II), which provided a direct comparison of probe tip dilution and downstream dilution and found comparable results when line loss was taken into account. Also performed at AAFEX II was a study that compared measured sample line penetration with theoretical calculations finding that theoretical calculations were an accurate alternative of measuring line loss. Two PM sampling systems were setup at an ARP demonstration and both system had similar results for both number and mass measurement. An instrument comparison was also performed that included an examination of condensation particle counter (CPC) cutoff size. It was also determined that a VPR was necessary to ensure that number instrument devices were only measuring non-volatile PM.

Solid propellant processing factor in rocket motor design

NASA Technical Reports Server (NTRS)

1971-01-01

The ways are described by which propellant processing is affected by choices made in designing rocket engines. Tradeoff studies, design proof or scaleup studies, and special design features are presented that are required to obtain high product quality, and optimum processing costs. Processing is considered to include the operational steps involved with the lining and preparation of the motor case for the grain; the procurement of propellant raw materials; and propellant mixing, casting or extrusion, curing, machining, and finishing. The design criteria, recommended practices, and propellant formulations are included.

Satellite applications to a coastal inlet study, Clearwater Beach, Florida

NASA Technical Reports Server (NTRS)

Wang, Y. H.; Smutz, M.; Ruth, B. E.; Brooks, H. K.

1977-01-01

Two sets of LANDSAT magnetic tapes were obtained and displayed on the screen of an IMAGE 100 computer. Spectral analysis was performed to produce various signatures, their extent and location. Subsequent ground truth observations and measurements were gathered by means of hydrographic surveys and low-altitude aerial photography for interpretation and calibration of the LANDSAT data. Finally, a coastal engineering assessment based on the LANDSAT data was made. Recommendations to the City of Clearwater regarding the navigational channel alignment and dredging practice are presented in the light of the inlet stability.

Shakedown and Preliminary Calibration Tests for the Fuel Engine Evaluation System Using the KM914A Sachs Rotary Combustion Engine.

DTIC Science & Technology

1981-12-01

obtained recommendations are made to improve the system. FEES was designed to handle spark ignition and compression ignition research engines of...Thermometer T W OF Temperature Web Bulb Sling Psychrometer % Relative Humidity Psychrometric chart mm Hg Vapor Pressure Vapor Pressure chart - Correction...results obtained recommendations are made to improve the system. FEES was designed to handle spark ignition and compression ignition research engines of

Applying Model Based Systems Engineering to NASA's Space Communications Networks

NASA Technical Reports Server (NTRS)

Bhasin, Kul; Barnes, Patrick; Reinert, Jessica; Golden, Bert

2013-01-01

System engineering practices for complex systems and networks now require that requirement, architecture, and concept of operations product development teams, simultaneously harmonize their activities to provide timely, useful and cost-effective products. When dealing with complex systems of systems, traditional systems engineering methodology quickly falls short of achieving project objectives. This approach is encumbered by the use of a number of disparate hardware and software tools, spreadsheets and documents to grasp the concept of the network design and operation. In case of NASA's space communication networks, since the networks are geographically distributed, and so are its subject matter experts, the team is challenged to create a common language and tools to produce its products. Using Model Based Systems Engineering methods and tools allows for a unified representation of the system in a model that enables a highly related level of detail. To date, Program System Engineering (PSE) team has been able to model each network from their top-level operational activities and system functions down to the atomic level through relational modeling decomposition. These models allow for a better understanding of the relationships between NASA's stakeholders, internal organizations, and impacts to all related entities due to integration and sustainment of existing systems. Understanding the existing systems is essential to accurate and detailed study of integration options being considered. In this paper, we identify the challenges the PSE team faced in its quest to unify complex legacy space communications networks and their operational processes. We describe the initial approaches undertaken and the evolution toward model based system engineering applied to produce Space Communication and Navigation (SCaN) PSE products. We will demonstrate the practice of Model Based System Engineering applied to integrating space communication networks and the summary of its results and impact. We will highlight the insights gained by applying the Model Based System Engineering and provide recommendations for its applications and improvements.

Styrene vapor control systems in FRP yacht plants.

PubMed

Todd, W F

1985-01-01

The production of large (greater than 25-ft) fiber-reinforced plastic (FRP) yachts has presented problems of styrene exposure in excess of the Occupational Safety and Health Administration permissible exposure level (OSHA PEL) of 100 ppm. Also, the National Institute for Occupational Safety and Health (NIOSH) is currently recommending a 10-hour workshift, 40-hour workweek time weighted average (TWA) of 50 ppm for styrene. Meeting this challenge will require a system of engineering, work practice, personal protective equipment, and monitoring control measures. NIOSH has performed a study of the engineering controls in three FRP yacht plants. Work practices and the use of personal protective equipment (PPE) were also considered in the evaluation. The three systems evaluated included a dilution system, a local ventilation system, and a push-pull ventilation system. The cost of constructing and operating these systems was not evaluated in this study. Study results indicated that each type of ventilation system can meet the present PEL of 100 ppm styrene; however, it is not certain that these systems can meet a lower PEL of 50 ppm styrene.

Contact dermatitis and patch testing for the allergist.

PubMed

Fonacier, Luz; Noor, Irum

2018-06-01

To review of contact dermatitis (CD) and its key allergens and provide updates and recommendations for the practicing allergist. Through the use of various scientific search engines (eg, PubMed and MEDLINE), we reviewed literature on CD, patch tests (PTs), key allergens, occupational dermatitis, and treatment. Studies on CD, important allergens, and PTs were considered. Contact-induced dermatitis may be due to allergic CD, irritant CD, systemic CD, contact urticaria, and protein CD. Key allergens include metals (nickel, gold), topical medicaments (topical corticosteroids), and cosmetics and personal care products (fragrances and preservatives such as methyl- and methylchloro-isothiazolinone). Present relevance of a positive PT result is the combination of definite, probable, and possible relevance and should be correlated with the patient's history and physical examination. Treatment of allergic CD includes identification of relevant allergens, patient education, avoidance, and provision of alternative products the patient can use. CD is a common inflammatory skin disease and should be suspected in patients presenting with acute, subacute, or chronic dermatitis. The gold standard for diagnosing allergic CD is a PT. This article provides practical recommendations for the diagnosis and management of CD commonly seen by the allergist in their practice. Copyright © 2018 American College of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

Maglev guideway design issues

DOE Office of Scientific and Technical Information (OSTI.GOV)

Plotkin, D.; Kim, S.

1997-05-01

This paper reports results from guideway analyses conducted as part of the National Maglev Initiative (NMI), a government-industry effort from 1989 to 1994, formed to encourage the development of US maglev technology and to assess its potential application within the US transportation system. Covered here are some key guideway design issues that were common to the designs assessed for the NMI, and to maglev guideways in general. They represent aspects that will need additional attention in future efforts to produce structurally sound and economical maglev guideways. These recommendations come from the analyses conducted by a team from the US Armymore » Construction Engineering Research Laboratories, the Civil Engineering Department of the University of Illinois, and Alfred Benesch and Company. The recommendations focus on design philosophy and the development of general design criteria, guideway maintenance and the provision for future alignment adjustment in both the guideway and the magnets, foundation design, and the long-term performance of guideway materials and reinforcement. Generally, one of the main challenges to guideway designers is to produce a structure that will be easily maintainable to the narrow tolerances and precise alignment required for practical high-speed maglev operation.« less

Software Engineering Laboratory Ada performance study: Results and implications

NASA Technical Reports Server (NTRS)

Booth, Eric W.; Stark, Michael E.

1992-01-01

The SEL is an organization sponsored by NASA/GSFC to investigate the effectiveness of software engineering technologies applied to the development of applications software. The SEL was created in 1977 and has three organizational members: NASA/GSFC, Systems Development Branch; The University of Maryland, Computer Sciences Department; and Computer Sciences Corporation, Systems Development Operation. The goals of the SEL are as follows: (1) to understand the software development process in the GSFC environments; (2) to measure the effect of various methodologies, tools, and models on this process; and (3) to identify and then to apply successful development practices. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that include the Ada Performance Study Report. This paper describes the background of Ada in the Flight Dynamics Division (FDD), the objectives and scope of the Ada Performance Study, the measurement approach used, the performance tests performed, the major test results, and the implications for future FDD Ada development efforts.

Teacher's experiences in PBL: implications for practice

NASA Astrophysics Data System (ADS)

Alves, Anabela C.; Sousa, Rui M.; Fernandes, Sandra; Cardoso, Elisabete; Carvalho, Maria Alice; Figueiredo, Jorge; Pereira, Rui M. S.

2016-03-01

Project-Based Learning (PBL) has been implemented in the first year of the Industrial Engineering and Management programme at the University of Minho, Portugal, since 2004/2005. The purpose of this paper is to analyse and discuss teachers' experiences in PBL in this programme and to explore its implications for student learning and for teaching practices in higher education. For data collection, the research method used was written narratives to these teachers, at the end of the PBL semester. Findings suggest that teachers express a positive view of PBL as a learning approach. They identify student motivation and engagement, along with a better understanding of the application of concepts in real-life situations, as important outcomes of the project for students. Besides this, teachers also highlight the importance of the development of transversal skills by students throughout the project. Recommendations for future work and implications for practice will also be discussed.

Chemists, Engineers Probe Mutual Problems.

ERIC Educational Resources Information Center

Chemical and Engineering News, 1980

1980-01-01

Summarizes recommendations made in a workshop sponsored by the American Chemical Society concerning issues involving the diverging viewpoints of chemistry and chemical engineering. Includes recommendations regarding curricula, salary differences, and the need to change attitudes of chemistry faculty toward industry and industrial chemistry. (CS)

Speed limits set lower than engineering recommendations : project summary report.

DOT National Transportation Integrated Search

2016-08-01

The Montana Department of Transportation (MDT) generally ensures that posted speed limits are set in accordance with engineering recommendations, which means that speed limits are typically set such that they are about equal to the observed 85th-perc...

Natural Hazards and Research Needs in Coastal and Ocean Engineering, Summary and Recommendations to the National Science Foundation and the Office of Naval Research,

DTIC Science & Technology

1984-11-01

1,746 N. RAL HAZARDS AND RESEARCH NEEDS IN COASTAL AND OCEAN I ENEERING SUMMA..W NATIONAL SCIENCE FOUNDATION WA ;NG ON OC 1NAVE F AL NOV 84 FG02 N N...and Research Needs in Coastal and Ocean Engineering Summary and Recommendations to the National Science Foundation and the Office of Naval Research A T...Recommendations to the National Science Foundation and the Office of Naval Research by the Ad Hoc Committee for the Civil and Environmental Engineering

A Phenomenological Study of the Lived Experiences of Latina Engineering Students at a Community College: Intersection of Race, Gender, and Class

NASA Astrophysics Data System (ADS)

Melendez, Marnie

The United States Science, Technology, and Engineering and Math (STEM) workforce is vital to this country's economic development interests, and its ability to compete effectively in the global market. One of the greatest challenges facing that industry in the US is the current and projected shortage of engineers serving the STEM industry. Policymakers, educators, and industry leaders in the US are concerned that if the noted challenge is not addressed, the projected shortage particularly in the engineering sector, will have a significant negative impact on the economic well-being of the U.S. (Hagedorn & Purnamasari, 2012). Research supports the need to widen the net when seeking out potential STEM students, and experts have pointed to increasing recruitment of women and underrepresented students into the STEM majors and fields. This study sought a deeper understanding of the lived experience of Latinas pursuing an engineering major at a California community college. Having the Latin engineering students describe in their own words what it is like to be women of color pursuing an engineering degree at a community college made their struggle real. It helped to explore new strategies and provoke change in policies to increase student success rates for Latinas in the STEM fields specifically in engineering. To attract and retain women of color (e.g., Latinas) in STEM programs, the effort must start where many of them typically begin their higher education, in the community college system. The researcher is also recommending that educators concerned with increasing retention, persistence, and academic performance, also examine and promote practices that serve to enhance the sense of belonging among all students, especially students of color. Furthermore, this research recommends that school administrators within the community college system should reaffirm their stated mission to eradicate racial and gender discrimination within the classroom and throughout the campus. Essentially, this stresses that college administration can play a huge role in enhancing the student success of historically disadvantaged students, including women of color pursuing or aspiring to pursue a degree within the STEM field.

A systematic review of recent clinical practice guidelines and best practice statements for the evaluation of the infertile male.

PubMed

Esteves, Sandro C; Chan, Peter

2015-09-01

We systematically identified and reviewed the methods and consistency of recommendations of recently developed clinical practice guidelines (CPG) and best practice statements (BPS) on the evaluation of the infertile male. MEDLINE and related engines as well as guidelines' Web sites were searched for CPG and BPS written in English on the general evaluation of male infertility published between January 2008 and April 2015. Four guidelines were identified, all of which reported to have been recently updated. Systematic review was not consistently used in the BPS despite being reported in the CPG. Only one of them reported having a patient representative in its development team. The CPG issued by the European Association of Urology (EAU) graded some recommendations and related that to levels (but not quality) of evidence. Overall, the BPS issued respectively by the American Urological Association and American Society for Reproductive Medicine concurred with each other, but both differed from the EAU guidelines with regard to methods of collection, extraction and interpretation of data. None of the guidelines incorporated health economics. Important specific limitations of conventional semen analysis results were ignored by all guidelines. Besides variation in the methodological quality, implementation strategies were not reported in two out of four guidelines. While the various panels of experts who contributed to the development of the CPG and BPS reviewed should be commended on their tremendous efforts aiming to establish a clinical standard in both the evaluation and management of male infertility, we recognized inconsistencies in the methodology of their synthesis and in the contents of their final recommendations. These discrepancies pose a barrier in the general implementation of these guidelines and may limit their utility in standardizing clinical practice or improving health-related outcomes. Continuous efforts are needed to generate high-quality evidence to allow further development of these important guidelines for the evaluation and management of males suffering from infertility.

Recommendations and strategies for using reclaimed asphalt pavement in the Flemish Region based on a first life cycle assessment research

NASA Astrophysics Data System (ADS)

Van den bergh, Wim; Kara, Patricia; Anthonissen, Joke; Margaritis, Alexandros; Jacobs, Geert; Couscheir, Karolien

2017-09-01

In Flanders, using Reclaimed Asphalt Pavement (RAP) is allowed in asphalt mixes for base layers. Primary economic and secondary laboratory-measured mechanical properties are given as justification for higher amounts in specific mixes. However, one should evaluate the performance of these mixes on long-term by environmental impact of the production until end-of-life. In this paper recommendations and strategies for using RA, based on current research, are discussed in a broader perspective such as using a carbon-footprint tool and warm-mix asphalt production in the Flemish Region. The paper aims to a wide discussion by reporting several outcomes of laboratory research, statistics and practical application in order to set a general strategy for the road engineering sector in the Flemish Region.

Teacher Perceptions of Inquiry and STEM Education in Bangladesh

NASA Astrophysics Data System (ADS)

Shahidullah, Kazi K.

This dissertation reports lower secondary science teachers perceptions of current practice in Dhaka, Bangladesh concerning inquiry and STEM Education in order to establish a baseline of data for reform of science education in Bangladesh. Bangladesh has been trying to incorporate inquiry-based science curricula since the 1970s. Over time, the science curricula also aligned with different international science education movements such as Science for All, Scientific Literacy, Science, Technology, and Society. Science, Technology, Engineering, and Mathematics (STEM) is the most recent science education movement in international science education. This study explored current practices and perceptions of lower secondary science teachers in order to establish a baseline of current practice so that future reform recommendations may be pursued and recommendations made for Bangladesh to overcome the inquiry-based challenges and to incorporate new STEM-based science education trends happening in the US and throughout the world. The study explored science teachers perceptions and readiness to transform their science classrooms based on self-reported survey. The survey utilized Likert-type scale with range 1 (very strongly disagree) to 6 (very strongly agree) among four hundred lower secondary science teachers, teacher training college faculty, and university faculty. The data is presented in four different categories: curriculum, instruction, assessment, and professional development. Results indicated that the participants understand and practice a certain level of inquiry in their science classrooms, though they do not have adequate professional development. Participants also stated that they do not have sufficient instructional materials and the curriculum is not articulated enough to support inquiry. On the other hand, the participants reported that they understand and practice a certain degree of inquiry and STEM-based science education, but they also state that the current curriculum and instructional materials are not sufficient to practice inquiry nor to integrate more than one or two disciplines with science as is required in STEM integrated teaching. Finally, this study recommends a framework for science education reform for Bangladesh based upon a combination of successful international science education reformation practices.

Recommendations for field measurements of aircraft noise

NASA Technical Reports Server (NTRS)

Marsh, A. H.

1982-01-01

Specific recommendations for environmental test criteria, data acquisition procedures, and instrument performance requirements for measurement of noise levels produced by aircraft in flight are provided. Recommendations are also given for measurement of associated airplane and engine parameters and atmospheric conditions. Recommendations are based on capabilities which were available commercially in 1981; they are applicable to field tests of aircraft flying subsonically past microphones located near the surface of the ground either directly under or to the side of a flight path. Aircraft types covered by the recommendations include fixed-wing airplanes powered by turbojet or turbofan engines or by propellers. The recommended field-measurement procedures are consistent with assumed requirements for data processing and analysis.

Health monitoring system for transmission shafts based on adaptive parameter identification

NASA Astrophysics Data System (ADS)

Souflas, I.; Pezouvanis, A.; Ebrahimi, K. M.

2018-05-01

A health monitoring system for a transmission shaft is proposed. The solution is based on the real-time identification of the physical characteristics of the transmission shaft i.e. stiffness and damping coefficients, by using a physical oriented model and linear recursive identification. The efficacy of the suggested condition monitoring system is demonstrated on a prototype transient engine testing facility equipped with a transmission shaft capable of varying its physical properties. Simulation studies reveal that coupling shaft faults can be detected and isolated using the proposed condition monitoring system. Besides, the performance of various recursive identification algorithms is addressed. The results of this work recommend that the health status of engine dynamometer shafts can be monitored using a simple lumped-parameter shaft model and a linear recursive identification algorithm which makes the concept practically viable.

Investigation of respiratory and dermal symptoms associated with metal working fluids at an aircraft engine manufacturing facility.

PubMed

Meza, Francisco; Chen, Lilia; Hudson, Naomi

2013-12-01

Each year, 1.2 million metalworkers are exposed to metalworking fluids (MWFs), which can cause dermal and respiratory disease. The National Institute for Occupational Safety and Health (NIOSH) conducted a health hazard evaluation of MWF exposures at an aircraft engine manufacturing facility. The objectives were to determine employee exposures to endotoxin and MWFs in the air, characterize symptoms experienced by employees working with MWFs, compare them to symptoms of employees unexposed to MWFs, and make recommendations for reducing exposures based on results. Four hundred seven workers were categorized as MWF exposed or MWF unexposed and completed questionnaires. Estimated prevalence ratios (PR) of dermatitis, asthma, and work-related asthma (WRA) symptoms were calculated. Airborne concentrations of MWF and endotoxin were measured, and work practices observed. MWF exposed workers had a significantly higher prevalence of dermatitis on wrists/forearms (PR 2.59; 95% CI 1.22, 5.46), asthma symptoms (PR 1.49; 95% CI 1.05, 2.13), and WRA symptoms (PR 2.10; 95% CI 1.22, 3.30) than unexposed workers. Airborne concentrations of MWF were below the NIOSH recommended exposure limit (REL) for MWF aerosols (thoracic particulate mass). Despite MWF exposures below the NIOSH REL, exposed workers had a higher prevalence of asthma, WRA, and dermatitis symptoms than unexposed workers. Recommendations to reduce exposure included configuring mist collectors to automatically turn on when the machine is in use, and enforcing enclosure use. © 2013 Wiley Periodicals, Inc.

Investigation of Respiratory and Dermal Symptoms Associated with Metal Working Fluids at an Aircraft Engine Manufacturing Facility

PubMed Central

Meza, Francisco; Chen, Lilia; Hudson, Naomi

2015-01-01

Background Each year, 1.2 million metalworkers are exposed to metalworking fluids (MWFs), which can cause dermal and respiratory disease. The National Institute for Occupational Safety and Health (NIOSH) conducted a health hazard evaluation of MWF exposures at an aircraft engine manufacturing facility. The objectives were to determine employee exposures to endotoxin and MWFs in the air, characterize symptoms experienced by employees working with MWFs, compare them to symptoms of employees unexposed to MWFs, and make recommendations for reducing exposures based on results. Methods 407 workers were categorized as MWF exposed or MWF unexposed and completed questionnaires. Estimated prevalence ratios (PR) of dermatitis, asthma, and work-related asthma (WRA) symptoms were calculated. Airborne concentrations of MWF and endotoxin were measured, and work practices observed. Results MWF exposed workers had a significantly higher prevalence of dermatitis on wrists/forearms (PR 2.59; 95% CI 1.22, 5.46), asthma symptoms (PR 1.49; 95% CI 1.05, 2.13) and WRA symptoms (PR 2.10; 95% CI 1.22, 3.30) than unexposed workers. Airborne concentrations of MWF were below the NIOSH recommended exposure limit (REL) for MWF aerosols (thoracic particulate mass). Conclusions Despite MWF exposures below the NIOSH REL, exposed workers had a higher prevalence of asthma, WRA, and dermatitis symptoms than unexposed workers. Recommendations to reduce exposure included configuring mist collectors to automatically turn on when the machine is in use, and enforcing enclosure use. PMID:24122918

Development and Use of Engineering Standards for Computational Fluid Dynamics for Complex Aerospace Systems

NASA Technical Reports Server (NTRS)

Lee, Hyung B.; Ghia, Urmila; Bayyuk, Sami; Oberkampf, William L.; Roy, Christopher J.; Benek, John A.; Rumsey, Christopher L.; Powers, Joseph M.; Bush, Robert H.; Mani, Mortaza

2016-01-01

Computational fluid dynamics (CFD) and other advanced modeling and simulation (M&S) methods are increasingly relied on for predictive performance, reliability and safety of engineering systems. Analysts, designers, decision makers, and project managers, who must depend on simulation, need practical techniques and methods for assessing simulation credibility. The AIAA Guide for Verification and Validation of Computational Fluid Dynamics Simulations (AIAA G-077-1998 (2002)), originally published in 1998, was the first engineering standards document available to the engineering community for verification and validation (V&V) of simulations. Much progress has been made in these areas since 1998. The AIAA Committee on Standards for CFD is currently updating this Guide to incorporate in it the important developments that have taken place in V&V concepts, methods, and practices, particularly with regard to the broader context of predictive capability and uncertainty quantification (UQ) methods and approaches. This paper will provide an overview of the changes and extensions currently underway to update the AIAA Guide. Specifically, a framework for predictive capability will be described for incorporating a wide range of error and uncertainty sources identified during the modeling, verification, and validation processes, with the goal of estimating the total prediction uncertainty of the simulation. The Guide's goal is to provide a foundation for understanding and addressing major issues and concepts in predictive CFD. However, this Guide will not recommend specific approaches in these areas as the field is rapidly evolving. It is hoped that the guidelines provided in this paper, and explained in more detail in the Guide, will aid in the research, development, and use of CFD in engineering decision-making.

Perspective: Web-based machine learning models for real-time screening of thermoelectric materials properties

NASA Astrophysics Data System (ADS)

Gaultois, Michael W.; Oliynyk, Anton O.; Mar, Arthur; Sparks, Taylor D.; Mulholland, Gregory J.; Meredig, Bryce

2016-05-01

The experimental search for new thermoelectric materials remains largely confined to a limited set of successful chemical and structural families, such as chalcogenides, skutterudites, and Zintl phases. In principle, computational tools such as density functional theory (DFT) offer the possibility of rationally guiding experimental synthesis efforts toward very different chemistries. However, in practice, predicting thermoelectric properties from first principles remains a challenging endeavor [J. Carrete et al., Phys. Rev. X 4, 011019 (2014)], and experimental researchers generally do not directly use computation to drive their own synthesis efforts. To bridge this practical gap between experimental needs and computational tools, we report an open machine learning-based recommendation engine (http://thermoelectrics.citrination.com) for materials researchers that suggests promising new thermoelectric compositions based on pre-screening about 25 000 known materials and also evaluates the feasibility of user-designed compounds. We show this engine can identify interesting chemistries very different from known thermoelectrics. Specifically, we describe the experimental characterization of one example set of compounds derived from our engine, RE12Co5Bi (RE = Gd, Er), which exhibits surprising thermoelectric performance given its unprecedentedly high loading with metallic d and f block elements and warrants further investigation as a new thermoelectric material platform. We show that our engine predicts this family of materials to have low thermal and high electrical conductivities, but modest Seebeck coefficient, all of which are confirmed experimentally. We note that the engine also predicts materials that may simultaneously optimize all three properties entering into zT; we selected RE12Co5Bi for this study due to its interesting chemical composition and known facile synthesis.

An Industrial Engineering Approach to Cost Containment of Pharmacy Education.

PubMed

Duncan, Wendy; Bottenberg, Michelle; Chase, Marilea; Chesnut, Renae; Clarke, Cheryl; Schott, Kathryn; Torry, Ronald; Welty, Tim

2015-11-25

A 2-semester project explored employing teams of fourth-year industrial engineering students to optimize some of our academic management processes. Results included significant cost savings and increases in efficiency, effectiveness, and student and faculty satisfaction. While we did not adopt all of the students' recommendations, we did learn some important lessons. For example, an initial investment of time in developing a mutually clear understanding of the problems, constraints, and goals maximizes the value of industrial engineering analysis and recommendations. Overall, industrial engineering was a valuable tool for optimizing certain academic management processes.

78 FR 77107 - Notice of Availability for Exclusive, Non-Exclusive, or Partially-Exclusive Licensing of an...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-20

..., or Partially-Exclusive Licensing of an Invention Concerning Preoperative Recommendations Engine..., entitled ``Preoperative Recommendations Engine,'' filed on January 14, 2013. The United States Government.... Army Medical Research and Materiel Command, ATTN: Command Judge Advocate, MCMR-JA, 504 Scott Street...

Research-Based Implementation of Peer Instruction: A Literature Review

PubMed Central

Vickrey, Trisha; Rosploch, Kaitlyn; Rahmanian, Reihaneh; Pilarz, Matthew; Stains, Marilyne

2015-01-01

Current instructional reforms in undergraduate science, technology, engineering, and mathematics (STEM) courses have focused on enhancing adoption of evidence-based instructional practices among STEM faculty members. These practices have been empirically demonstrated to enhance student learning and attitudes. However, research indicates that instructors often adapt rather than adopt practices, unknowingly compromising their effectiveness. Thus, there is a need to raise awareness of the research-based implementation of these practices, develop fidelity of implementation protocols to understand adaptations being made, and ultimately characterize the true impact of reform efforts based on these practices. Peer instruction (PI) is an example of an evidence-based instructional practice that consists of asking students conceptual questions during class time and collecting their answers via clickers or response cards. Extensive research has been conducted by physics and biology education researchers to evaluate the effectiveness of this practice and to better understand the intricacies of its implementation. PI has also been investigated in other disciplines, such as chemistry and computer science. This article reviews and summarizes these various bodies of research and provides instructors and researchers with a research-based model for the effective implementation of PI. Limitations of current studies and recommendations for future empirical inquiries are also provided. PMID:25713095

Single-beam thermal lens measurement of thermal diffusivity of engine coolants

NASA Astrophysics Data System (ADS)

George, Nibu A.; Thomas, Nibu B.; Chacko, Kavya; T, Neethu V.; Hussain Moidu, Haroon; Piyush, K.; David, Nitheesh M.

2015-04-01

Automobile engine coolant liquids are commonly used for efficient heat transfer from the engine to the surroundings. In this work we have investigated the thermal diffusivity of various commonly available engine coolants in Indian automobile market. We have used single beam laser induced thermal lens technique for the measurements. Engine coolants are generally available in concentrated solution form and are recommended to use at specified dilution. We have investigated the samples in the entire recommended concentration range for the use in radiators. While some of the brands show an enhanced thermal diffusivity compared to pure water, others show slight decrease in thermal diffusivity.

Best practices in incident investigation in the chemical process industries with examples from the industry sector and specifically from Nova Chemicals.

PubMed

Morrison, Lisa M

2004-07-26

This paper will summarize best practices in incident investigation in the chemical process industries and will provide examples from both the industry sector and specifically from NOVA Chemicals. As a sponsor of the Center for Chemical Process Safety (CCPS), an industry technology alliance of the American Institute of Chemical Engineers, NOVA Chemicals participates in a number of working groups to help develop best practices and tools for the chemical process and associated industries in order to advance chemical process safety. A recent project was to develop an update on guidelines for investigating chemical process incidents. A successful incident investigation management system must ensure that all incidents and near misses are reported, that root causes are identified, that recommendations from incident investigations identify appropriate preventive measures, and that these recommendations are resolved in a timely manner. The key elements of an effective management system for incident investigation will be described. Accepted definitions of such terms as near miss, incident, and root cause will be reviewed. An explanation of the types of incident classification systems in use, along with expected levels of follow-up, will be provided. There are several incident investigation methodologies in use today by members of the CCPS; most of these methodologies incorporate the use of several tools. These tools include: timelines, sequence diagrams, causal factor identification, brainstorming, checklists, pre-defined trees, and team-defined logic trees. Developing appropriate recommendations and then ensuring their resolution is the key to prevention of similar events from recurring, along with the sharing of lessons learned from incidents. There are several sources of information on previous incidents and lessons learned available to companies. In addition, many companies in the chemical process industries use their own internal databases to track recommendations from incidents and to share learnings internally.

The road ahead: comprehensive and innovative approaches for improving safety and preventing child maltreatment fatalities.

PubMed

Chahine, Zeinab; Sanders, David

2013-01-01

This article presents a high-level overview of the complex issues, opportunities, and challenges involved in improving child safety and preventing child maltreatment fatalities. It emphasizes that improving measurement and classification is critical to understanding and preventing child maltreatment fatalities. It also stresses the need to reframe child maltreatment interventions from a public health perspective. The article draws on the lessons learned from state-of-the-art safety engineering innovations, research, and other expert recommendations presented in this special issue that can inform future policy and practice direction in this important area.

Energy Engineering Analysis Program (EEAP), Badger Army Ammunition Plant, Baraboo, Wisconsin: Executive summary. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1983-12-30

The purpose of this study and report is to develop a systematic program of energy consumption reductions in compliance with the stated goals of the Army Facilities Energy Plan (AFEP). This report will: Develop a systematic plan of energy conservation opportunities (ECO`s) that will meet the objectives of the AFEP. Develop a coordinated facility-wide energy study. Prepare DD Form 1391 and Project Development Brochure (PDB`s) and required documentation for feasible projects. Include all practical energy conservation methods and determine economic feasibility in accordance with given guidelines. List and prioritize recommended projects.

Pilot workload and fatigue: A critical survey of concepts and assessment techniques

NASA Technical Reports Server (NTRS)

Gartner, W. B.; Murphy, M. R.

1976-01-01

The principal unresolved issues in conceptualizing and measuring pilot workload and fatigue are discussed. These issues are seen as limiting the development of more useful working concepts and techniques and their application to systems engineering and management activities. A conceptual analysis of pilot workload and fatigue, an overview and critique of approaches to the assessment of these phenomena, and a discussion of current trends in the management of unwanted workload and fatigue effects are presented. Refinements and innovations in assessment methods are recommended for enhancing the practical significance of workload and fatigue studies.

Results from the NASA Spacecraft Fault Management Workshop: Cost Drivers for Deep Space Missions

NASA Technical Reports Server (NTRS)

Newhouse, Marilyn E.; McDougal, John; Barley, Bryan; Stephens Karen; Fesq, Lorraine M.

2010-01-01

Fault Management, the detection of and response to in-flight anomalies, is a critical aspect of deep-space missions. Fault management capabilities are commonly distributed across flight and ground subsystems, impacting hardware, software, and mission operations designs. The National Aeronautics and Space Administration (NASA) Discovery & New Frontiers (D&NF) Program Office at Marshall Space Flight Center (MSFC) recently studied cost overruns and schedule delays for five missions. The goal was to identify the underlying causes for the overruns and delays, and to develop practical mitigations to assist the D&NF projects in identifying potential risks and controlling the associated impacts to proposed mission costs and schedules. The study found that four out of the five missions studied had significant overruns due to underestimating the complexity and support requirements for fault management. As a result of this and other recent experiences, the NASA Science Mission Directorate (SMD) Planetary Science Division (PSD) commissioned a workshop to bring together invited participants across government, industry, and academia to assess the state of the art in fault management practice and research, identify current and potential issues, and make recommendations for addressing these issues. The workshop was held in New Orleans in April of 2008. The workshop concluded that fault management is not being limited by technology, but rather by a lack of emphasis and discipline in both the engineering and programmatic dimensions. Some of the areas cited in the findings include different, conflicting, and changing institutional goals and risk postures; unclear ownership of end-to-end fault management engineering; inadequate understanding of the impact of mission-level requirements on fault management complexity; and practices, processes, and tools that have not kept pace with the increasing complexity of mission requirements and spacecraft systems. This paper summarizes the findings and recommendations from that workshop, particularly as fault management development issues affect operations and the development of operations capabilities.

Quality and consistency of guidelines for the management of mild traumatic brain injury in the emergency department.

PubMed

Tavender, Emma J; Bosch, Marije; Green, Sally; O'Connor, Denise; Pitt, Veronica; Phillips, Kate; Bragge, Peter; Gruen, Russell L

2011-08-01

The objective was to provide an overview of the recommendations and quality of evidence-based clinical practice guidelines (CPGs) for the emergency management of mild traumatic brain injury (mTBI), with a view to informing best practice and improving the consistency of recommendations. Electronic searches of health databases (MEDLINE, EMBASE, The Cochrane Library, PsycINFO), CPG clearinghouse websites, CPG developer websites, and Internet search engines up to January 2010 were conducted. CPGs were included if 1) they were published in English and freely accessible, 2) their scope included the management of mTBI in the emergency department (ED), 3) the date of last search was within the past 10 years (2000 onward), 4) systematic methods were used to search for evidence, and 5) there was an explicit link between the recommendations and the supporting evidence. Four authors independently assessed the quality of the included CPGs using the Appraisal of Guidelines, Research and Evaluation (AGREE) Instrument. The authors extracted and categorized recommendations according to initial clinical assessment, imaging, management, observation, discharge planning, and patient information and follow-up. The search identified 18 potential CPGs, of which six met the inclusion criteria. The included CPGs varied in scope, target population, size, and guideline development processes. Four CPGs were assessed as "strongly recommended." The majority of CPGs did not provide information about the level of stakeholder involvement (mean AGREE standardized domain score = 57%, range = 25% to 81%), nor did they address the organizational/cost implications of applying the recommendations or provide criteria for monitoring and review of recommendations in practice (mean AGREE standardized domain score = 46.6%, range = 19% to 94%). Recommendations were mostly consistent in terms of the use of the Glasgow Coma Scale (GCS) score (adult and pediatric) to assess the level of consciousness, initial assessment criteria, the use of computed tomography (CT) scanning as imaging investigation of choice, and the provision of patient information. The CPGs defined mTBI in a variety of ways and described different rules to determine the need for CT scanning and therefore used different criteria to identify high-risk patients. Higher-quality CPGs for mTBI are consistent in their recommendations about assessment, imaging, and provision of patient information. There is not, however, an agreed definition of mTBI, and the quality of future CPGs could be improved with better reporting of stakeholder involvement, procedures for updating, and greater consideration of the applicability of the recommendations (cost implications, monitoring procedures). Nevertheless, guideline developers may benefit from adapting existing CPGs to their local context rather than investing in developing CPGs de novo. © 2011 by the Society for Academic Emergency Medicine.

Implementing AORN recommended practices for prevention of transmissible infections.

PubMed

Patrick, Marcia R; Hicks, Rodney W

2013-12-01

Preventing infection in the perioperative setting is a critical element of patient and health care worker safety. This article reviews the recommendations in the AORN "Recommended practices for prevention of transmissible infections in the perioperative practice setting." The recommended practices are intended to help perioperative nurses implement standard and transmission-based precautions (ie, contact, droplet, airborne), including use of personal protective equipment as well as interventions to prevent surgical site infections and exposure to bloodborne pathogens. Additional recommendations cover vaccination programs and how to manage personnel who require work restrictions. Hospital and ambulatory patient scenarios are included to help perioperative nurses apply the recommendations in daily practice. Copyright © 2013 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Low Thrust, Deep Throttling, US/CIS Integrated NTRE

NASA Astrophysics Data System (ADS)

Culver, Donald W.; Kolganov, Vyacheslav; Rochow, Richard F.

1994-07-01

In 1993 our international team performed a follow-on ``Nuclear Thermal Rocket Engine (NTRE) Extended Life Feasibility Assessment'' study for the Nuclear Propulsion Office (NPO) at NASAs Lewis Research Center. The main purpose of this study was to complete the 1992 study matrix to assess NTRE designs at thrust levels of 22.5, 11.3, and 6.8 tonnes, using Commonwealth of Independent States (CIS) reactor technology. An additional Aerojet goal was to continue improving the NTRE concept we had generated. Deep throttling, mission performance optimized engine design parametrics, and reliability/cost enhancing engine system simplifications were studied, because they seem to be the last three basic design improvements sorely needed by post-NERVA NTRE. Deep throttling improves engine life by eliminating damaging thermal and mechanical shocks caused by after-cooling with pulsed coolant flow. Alternately, it improves mission performance with steady flow after-cooling by minimizing reactor over-cooling. Deep throttling also provides a practical transition from high pressures and powers of the high thrust power cycle to the low pressures and powers of our electric power generating mode. Two deep throttling designs are discussed; a workable system that was studied and a simplified system that is recommended for future study. Mission-optimized engine thrust/weight (T/W) and Isp predictions are included along with system flow schemes and concept sketches.

Planning Guide to Statewide Implementation, Scale-Up, and Sustainability of Recommended Practices. RP[superscript 2]: Reaching Potentials through Recommended Practices

ERIC Educational Resources Information Center

Smith, Barbara J.; Fox, Lise; Dunlap, Glen; Strain, Phil; Trivette, Carol M.; Perez Binder, Denise; Bovey, Ted; McCullough, Katy; Blase, Karen

2015-01-01

This document is a guide for implementing widespread use of evidence-based practices for improving the outcomes for young children with or at-risk for delays or disabilities and their families. The evidence-based practices are selected practices from the Division for Early Childhood (DEC) Recommended Practices (RPs). The guide is written for…

Engaging Girls in STEM: How to Plan or Revamp Your EPO Resources or Activities to be More Effective for Girls

NASA Technical Reports Server (NTRS)

Bleacher, Lora V.; Peterson, Karen A.; Sharma, Mangala; Smith, Denise

2012-01-01

This two-hour workshop, which was held as a follow-on to the plenary session "Engaging Girls in STEM: A Discussion of Foundational and Current Research on What Works," offered research-based insights, resources, and tips to help participants plan or revamp programs and resources aimed at encouraging girls in science. Led by Karen Peterson, PI for the National Girls Collaborative Project,1 the workshop included: a brief discussion about effective strategies recommended for encouraging girls in STEM; hands-on experience, where participants-availing of the expert's guidance-applied the recommended strategies to alter or tailor an existing or planned program/resource to be more girl-friendly; and a sharing out, where the participants reflected on the results of the hands-on exercise and developed action items to continue carrying out the girl-friendly best practices in science, technology, engineering, and math education and public outreach.

Final Report of the NASA Office of Safety and Mission Assurance Agile Benchmarking Team

NASA Technical Reports Server (NTRS)

Wetherholt, Martha

2016-01-01

To ensure that the NASA Safety and Mission Assurance (SMA) community remains in a position to perform reliable Software Assurance (SA) on NASAs critical software (SW) systems with the software industry rapidly transitioning from waterfall to Agile processes, Terry Wilcutt, Chief, Safety and Mission Assurance, Office of Safety and Mission Assurance (OSMA) established the Agile Benchmarking Team (ABT). The Team's tasks were: 1. Research background literature on current Agile processes, 2. Perform benchmark activities with other organizations that are involved in software Agile processes to determine best practices, 3. Collect information on Agile-developed systems to enable improvements to the current NASA standards and processes to enhance their ability to perform reliable software assurance on NASA Agile-developed systems, 4. Suggest additional guidance and recommendations for updates to those standards and processes, as needed. The ABT's findings and recommendations for software management, engineering and software assurance are addressed herein.

Professional development of Russian HEIs' management and faculty in CDIO standards application

NASA Astrophysics Data System (ADS)

Chuchalin, Alexander; Malmqvist, Johan; Tayurskaya, Marina

2016-07-01

The paper presents the approach to complex training of managers and faculty staff for system modernisation of Russian engineering education. As a methodological basis of design and implementation of the faculty development programme, the CDIO (Conceive-Design-Implement-Operate) Approach was chosen due to compliance of its concept to the purposes and tasks of engineering education development in Russia. The authors describe the structure, the content and implementation technology of the programme designed by Tomsk Polytechnic University and Skolkovo Institute of Science and Technology with the assistance of Chalmers University of Technology and KTH Royal Institute of Technology and other members of the CDIO Initiative. The programme evaluation based on the questionnaire results showed that the programme content is relevant, has high practical value and high level of novelty for all categories of participants. Therefore, the CDIO approach was recommended for implementation to improve various elements of the engineering programme such as learning outcomes, content and structure, teaching, learning and assessment methods. Besides, the feedback results obtained through programme participants' survey contribute to identification of problems preventing development of engineering education in Russia and thus serve as milestones for further development of the programme.

Korean clinical practice guidelines: otitis media in children.

PubMed

Lee, Hyo-Jeong; Park, Su-Kyoung; Choi, Kyu Young; Park, Su Eun; Chun, Young Myung; Kim, Kyu-Sung; Park, Shi-Nae; Cho, Yang-Sun; Kim, Young-Jae; Kim, Hyung-Jong; Korean Otologic Society

2012-08-01

Acute otitis media (AOM) and otitis media with effusion (OME) are common infections in children, and their diagnosis and treatment have significant impacts on the health of children and the costs of providing national medical care. In 2009, the Korean Otologic Society organized a committee composed of experts in the field of otolaryngology, pediatrics, and family medicine to develop Korean clinical practice guidelines (CPG) for otitis media in children with the goal of meeting regional medical and social needs in Korea. For this purpose, the committee adapted existing guidelines. A comprehensive literature review was carried out primarily from 2004 to 2009 using medical search engines including data from Korea. A draft was written after a national questionnaire survey and several public audits, and it was editorially supervised by senior advisors before publication of the final report. These evidence-based guidelines for the management of otitis media in children provide recommendations to primary practitioners for the diagnosis and treatment of children younger than 15 yr old with uncomplicated AOM and OME. The guidelines include recommendations regarding diagnosis, treatment options, prevention and parent education, medical records, referral, and complementary/alternative medicine for treating pediatric otitis media.

SEA Change: Bringing together Science, Engineering and the Arts at the University of Florida

NASA Astrophysics Data System (ADS)

Perfit, M. R.; Mertz, M. S.; Lavelli, L.

2014-12-01

A group of interested and multifaceted faculty, administrators and students created the Science, Engineering, Arts Committee (SEA Change) two years ago at the University of Florida (UF). Recognizing that innovative ideas arise from the convergence of divergent thinkers, the committee seeks to bring together faculty in Science, Engineering, the Arts and others across campus to develop and disseminate innovative ideas for research, teaching and service that will enhance the campus intellectual environment. We meet regularly throughout the year as faculty with graduate and undergraduate students to catalyze ideas that could lead to collaborative or interdisciplinary projects and make recommendations to support innovative, critical and creative work. As an example, the Department of Geological Sciences and the School of Art and Art History collaborated on a competition among UF undergraduate painting students to create artistic works that related to geoscience. Each student gathered information from Geological Sciences faculty members to use for inspiration in creating paintings along with site-specific proposals to compete for a commission. The winning work was three-story high painting representing rock strata and the Florida environment entitled "Prairie Horizontals" that is now installed in the Geoscience building entrance atrium. Two smaller paintings of the second place winner, depicting geologists in the field were also purchased and displayed in a main hallway. Other activities supported by SEA Change have included a collaborative work of UF engineering and dance professors who partnered for the Creative Storytelling and Choreography Lab, to introduce basic storytelling tools to engineering students. A campus-wide gathering of UF faculty and graduate students titled Creative Practices: The Art & Science of Discovery featured guest speakers Steven Tepper, Victoria Vesna and Benjamin Knapp in spring 2014. The Committee plans to develop and foster ideas that will lead to more collaborative or interdisciplinary projects and make recommendations to the administration to support a creative environment across disciplines on UF campus.

An Industrial Engineering Approach to Cost Containment of Pharmacy Education

PubMed Central

Bottenberg, Michelle; Chase, Marilea; Chesnut, Renae; Clarke, Cheryl; Schott, Kathryn; Torry, Ronald; Welty, Tim

2015-01-01

A 2-semester project explored employing teams of fourth-year industrial engineering students to optimize some of our academic management processes. Results included significant cost savings and increases in efficiency, effectiveness, and student and faculty satisfaction. While we did not adopt all of the students’ recommendations, we did learn some important lessons. For example, an initial investment of time in developing a mutually clear understanding of the problems, constraints, and goals maximizes the value of industrial engineering analysis and recommendations. Overall, industrial engineering was a valuable tool for optimizing certain academic management processes. PMID:26839421

Bullying Prevention: a Summary of the Report of the National Academies of Sciences, Engineering, and Medicine : Committee on the Biological and Psychosocial Effects of Peer Victimization: Lessons for Bullying Prevention.

PubMed

Flannery, Daniel J; Todres, Jonathan; Bradshaw, Catherine P; Amar, Angela Frederick; Graham, Sandra; Hatzenbuehler, Mark; Masiello, Matthew; Moreno, Megan; Sullivan, Regina; Vaillancourt, Tracy; Le Menestrel, Suzanne M; Rivara, Frederick

2016-11-01

Long tolerated as a rite of passage into adulthood, bullying is now recognized as a major and preventable public health problem. The consequences of bullying-for those who are bullied, the perpetrators of bullying, and the witnesses-include poor physical health, anxiety, depression, increased risk for suicide, poor school performance, and future delinquent and aggressive behavior. Despite ongoing efforts to address bullying at the law, policy, and programmatic levels, there is still much to learn about the consequences of bullying and the effectiveness of various responses. In 2016, the National Academies of Sciences, Engineering, and Medicine published a report entitled Preventing Bullying Through Science, Policy and Practice, which examined the evidence on bullying, its impact, and responses to date. This article summarizes the report's key findings and recommendations related to bullying prevention.

The Effect of Piston-Head Temperature on Knock-Limited Power

NASA Technical Reports Server (NTRS)

Imming, Harry S.

1944-01-01

To determine the effect of piston-head temperature on knock-limited power. Tests were made in a supercharged CFR engine over a range of fuel-air ratios from 0.055 to 0.120, using S-3 reference fuel, AN-F-28, Amendment-2, aviation gasoline, and AN-F-28 plus 2 percent xylidines by weight. Tests were run at a compression ratio of 7.0 with inlet-air temperatures of 150 F and 250 F and at a compression ratio of 8.0 with an inlet-air temperature of 250 F. All other engine conditions were held constant. The piston-head temperature was varied by circulation of oil through passages in the crown of a liquid-cooled piston. This method of piston cooling decreased the piston-head temperature about 80 F. The data are not intended to constitute a recommendation as to the advisability of piston cooling in practice.

Fostering Creative Engineers: A Key to Face the Complexity of Engineering Practice

ERIC Educational Resources Information Center

Zhou, Chunfang

2012-01-01

Recent studies have argued a shift of thinking about engineering practice from a linear conception to a system understanding. The complexity of engineering practice has been thought of as the root of challenges for engineers. Moreover, creativity has been emphasised as one key capability that engineering students should master. This paper aims to…

Laboratory safety aspects of SARS at Biosafety Level 2.

PubMed

Barkham, T M S

2004-03-01

The severe acute respiratory syndrome (SARS)-associated coronavirus causes severe disease, is transmissible to the community and there is no effective prophylaxis or treatment--perhaps fulfilling the criteria for biohazard group 3 or 4. The recommendation to use Biosafety Level (BSL)3 practices within a BSL2 environment appears to have been a practical decision based on available resources; most diagnostic laboratories operate at BSL2. Safety is achieved with controls in administration, engineering and personal protective equipment/behaviour. At the heart of every safety policy is a risk assessment based on the exact manipulations employed. Excessive administrative and engineering controls are less important than the training and personal attitudes, abilities and understanding of the staff. The SARS outbreak focused our attention on the safety aspects of common mundane tasks, such as decapping blood tubes. Laboratories often claim they follow certain practices but casual observation does not always support these claims. Guidelines differed and created uncertainty. This was stressful for laboratory staff held accountable for their implementation. Attempts to categorise risks and their management into neatly wrapped parcels are attractive, but closer inspection reveals a subjective element that allows doubt to creep in with varying interpretations of the literature. Staff most at risk were those handling respiratory samples. Staff receiving samples via pneumatic tubes had least control over their exposure and were potentially exposed to aerosols from leaking samples. Risk assessment remains a balance between cost and benefit.

Treatment Recommendations for Single-Unit Crowns: Findings from The National Dental Practice-Based Research Network

PubMed Central

McCracken, Michael S.; Louis, David R.; Litaker, Mark S.; Minyé, Helena M.; Mungia, Rahma; Gordan, Valeria V.; Marshall, Don G.; Gilbert, Gregg H.

2016-01-01

Background Objectives were to: (1) quantify practitioner variation in likelihood to recommend a crown; and (2) test whether certain dentist, practice, and clinical factors are significantly associated with this likelihood. Methods Dentists in the National Dental Practice-Based Research Network completed a questionnaire about indications for single-unit crowns. In four clinical scenarios, practitioners ranked their likelihood of recommending a single-unit crown. These responses were used to calculate a dentist-specific “Crown Factor” (CF; range 0–12). A higher score implies a higher likelihood to recommend a crown. Certain characteristics were tested for statistically significant associations with the CF. Results 1,777 of 2,132 eligible dentists responded (83%). Practitioners were most likely to recommend crowns for teeth that were fractured, cracked, endodontically-treated, or had a broken restoration. Practitioners overwhelmingly recommended crowns for posterior teeth treated endodontically (94%). Practice owners, Southwest practitioners, and practitioners with a balanced work load were more likely to recommend crowns, as were practitioners who use optical scanners for digital impressions. Conclusions There is substantial variation in the likelihood of recommending a crown. While consensus exists in some areas (posterior endodontic treatment), variation dominates in others (size of an existing restoration). Recommendations varied by type of practice, network region, practice busyness, patient insurance status, and use of optical scanners. Practical Implications Recommendations for crowns may be influenced by factors unrelated to tooth and patient variables. A concern for tooth fracture -- whether from endodontic treatment, fractured teeth, or large restorations -- prompted many clinicians to recommend crowns. PMID:27492046

Model building techniques for analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walther, Howard P.; McDaniel, Karen Lynn; Keener, Donald

2009-09-01

The practice of mechanical engineering for product development has evolved into a complex activity that requires a team of specialists for success. Sandia National Laboratories (SNL) has product engineers, mechanical designers, design engineers, manufacturing engineers, mechanical analysts and experimentalists, qualification engineers, and others that contribute through product realization teams to develop new mechanical hardware. The goal of SNL's Design Group is to change product development by enabling design teams to collaborate within a virtual model-based environment whereby analysis is used to guide design decisions. Computer-aided design (CAD) models using PTC's Pro/ENGINEER software tools are heavily relied upon in the productmore » definition stage of parts and assemblies at SNL. The three-dimensional CAD solid model acts as the design solid model that is filled with all of the detailed design definition needed to manufacture the parts. Analysis is an important part of the product development process. The CAD design solid model (DSM) is the foundation for the creation of the analysis solid model (ASM). Creating an ASM from the DSM currently is a time-consuming effort; the turnaround time for results of a design needs to be decreased to have an impact on the overall product development. This effort can be decreased immensely through simple Pro/ENGINEER modeling techniques that summarize to the method features are created in a part model. This document contains recommended modeling techniques that increase the efficiency of the creation of the ASM from the DSM.« less

Comparing Drug-Disease Associations in Clinical Practice Guideline Recommendations and Drug Product Label Indications.

PubMed

Leung, Tiffany I; Dumontier, Michel

2015-01-01

Clinical practice guidelines (CPGs) and structured product labels (SPLs) are both intended to promote evidence-based medical practices and guide clinicians' prescribing decisions. However, it is unclear how well CPG recommendations about pharmacologic therapies for certain diseases match SPL indications for recommended drugs. In this study, we use publicly available data and text mining methods to examine drug-disease associations in CPG recommendations and SPL treatment indications for 15 common chronic conditions. Preliminary results suggest that there is a mismatch between guideline-recommended pharmacologic therapies and SPL indications. Conflicting or inconsistent recommendations and indications may complicate clinical decision making and implementation or measurement of best practices.

Study on analysis from sources of error for Airborne LIDAR

NASA Astrophysics Data System (ADS)

Ren, H. C.; Yan, Q.; Liu, Z. J.; Zuo, Z. Q.; Xu, Q. Q.; Li, F. F.; Song, C.

2016-11-01

With the advancement of Aerial Photogrammetry, it appears that to obtain geo-spatial information of high spatial and temporal resolution provides a new technical means for Airborne LIDAR measurement techniques, with unique advantages and broad application prospects. Airborne LIDAR is increasingly becoming a new kind of space for earth observation technology, which is mounted by launching platform for aviation, accepting laser pulses to get high-precision, high-density three-dimensional coordinate point cloud data and intensity information. In this paper, we briefly demonstrates Airborne laser radar systems, and that some errors about Airborne LIDAR data sources are analyzed in detail, so the corresponding methods is put forwarded to avoid or eliminate it. Taking into account the practical application of engineering, some recommendations were developed for these designs, which has crucial theoretical and practical significance in Airborne LIDAR data processing fields.

33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

Code of Federal Regulations, 2010 CFR

2010-07-01

... incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... plan incorporate best available technology and recommended industry practices? Each applicant must... industry practices as directed in § 148.730. ...

33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

Code of Federal Regulations, 2012 CFR

2012-07-01

... incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... plan incorporate best available technology and recommended industry practices? Each applicant must... industry practices as directed in § 148.730. ...

A systematic review and summarization of the recommendations and research surrounding Curriculum-Based Measurement of oral reading fluency (CBM-R) decision rules.

PubMed

Ardoin, Scott P; Christ, Theodore J; Morena, Laura S; Cormier, Damien C; Klingbeil, David A

2013-02-01

Research and policy have established that data are necessary to guide decisions within education. Many of these decisions are made within problem solving and response to intervention frameworks for service delivery. Curriculum-Based Measurement in Reading (CBM-R) is a widely used data collection procedure within those models of service delivery. Although the evidence for CBM-R as a screening and benchmarking procedure has been summarized multiple times in the literature, there is no comprehensive review of the evidence for its application to monitor and evaluate individual student progress. The purpose of this study was to identify and summarize the psychometric and empirical evidence for CBM-R as it is used to monitor and evaluate student progress. There was an emphasis on the recommended number of data points collected during progress monitoring and interpretive guidelines. The review identified 171 journal articles, chapters, and instructional manuals using online search engines and research databases. Recommendations and evidence from 102 documents that met the study criteria were evaluated and summarized. Results indicate that most decision-making practices are based on expert opinion and that there is very limited psychometric or empirical support for such practices. There is a lack of published evidence to support program evaluation and progress monitoring with CBM-R. More research is required to inform data collection procedures and interpretive guidelines. Copyright © 2012 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

Human Systems Integration (HSI) Practitioner's Guide

NASA Technical Reports Server (NTRS)

Zumbado, Jennifer Rochlis

2015-01-01

The NASA/SP-2015-3709, Human Systems Integration (HSI) Practitioner's Guide, also known as the "HSIPG," provides a tool for implementing HSI activities within the NASA systems engineering framework. The HSIPG is written to aid the HSI practitioner engaged in a program or project (P/P), and serves as a knowledge base to allow the practitioner to step into an HSI lead or team member role for NASA missions. Additionally, this HSIPG is written to address the role of HSI in the P/P management and systems engineering communities and aid their understanding of the value added by incorporating good HSI practices into their programs and projects. Through helping to build a community of knowledgeable HSI practitioners, this document also hopes to build advocacy across the Agency for establishing strong, consistent HSI policies and practices. Human Systems Integration (HSI) has been successfully adopted (and adapted) by several federal agencies-most notably the U.S. Department of Defense (DoD) and the Nuclear Regulatory Commission (NRC)-as a methodology for reducing system life cycle costs (LCCs). These cost savings manifest themselves due to reductions in required numbers of personnel, the practice of human-centered design, decreased reliance on specialized skills for operations, shortened training time, efficient logistics and maintenance, and fewer safety-related risks and mishaps due to unintended human/system interactions. The HSI process for NASA establishes how cost savings and mission success can be realized through systems engineering. Every program or project has unique attributes. This HSIPG is not intended to provide one-size-fits-all recommendations for HSI implementation. Rather, HSI processes should be tailored to the size, scope, and goals of individual situations. The instructions and processes identified here are best used as a starting point for implementing human-centered system concepts and designs across programs and projects of varying types, including manned and unmanned, human spaceflight, aviation, robotics, and environmental science missions. The practitioner using this guide should have expertise in Systems Engineering or other disciplines involved in producing systems with anticipated human interactions. (See section 1.6 of this guide for further discussion on HSI discipline domains.) The HSIPG provides an "HSI layer" to the NASA Systems Engineering Engine (SEE), detailed in NASA Procedural Requirement (NPR) 7123.1B, NASA Systems Engineering Processes and Requirements, and further explained in NASA/SP-2007-6105, Systems Engineering Handbook (see HSIPG Table 2.2-1, NASA Documents with HSI Content, for specific references and document versions).

Recommender engine for continuous-time quantum Monte Carlo methods

NASA Astrophysics Data System (ADS)

Huang, Li; Yang, Yi-feng; Wang, Lei

2017-03-01

Recommender systems play an essential role in the modern business world. They recommend favorable items such as books, movies, and search queries to users based on their past preferences. Applying similar ideas and techniques to Monte Carlo simulations of physical systems boosts their efficiency without sacrificing accuracy. Exploiting the quantum to classical mapping inherent in the continuous-time quantum Monte Carlo methods, we construct a classical molecular gas model to reproduce the quantum distributions. We then utilize powerful molecular simulation techniques to propose efficient quantum Monte Carlo updates. The recommender engine approach provides a general way to speed up the quantum impurity solvers.

Integrating Engineering into Delaware's K-5 Classrooms: A Study of Pedagogical and Curricular Resources

NASA Astrophysics Data System (ADS)

Grusenmeyer, Linda Huey

This study examines the personal and curricular resources available to Delaware's elementary teachers during a time of innovative curriculum change, i.e., their knowledge, goals and beliefs regarding elementary engineering curriculum and the pedagogical support to teach two Science and Engineering Practices provided by science teaching materials. Delaware was at the forefront of K-12 STEM movement, first to adopt statewide elementary curriculum materials to complement existing science units, and one of the first to adopt the new science standards--Next Generation Science Standards. What supports were available to teachers as they adapted and adopted this new curriculum? To investigate this question, I examined (1) teachers' beliefs about engineering and the engineering curriculum, and (2) the pedagogical supports available to teachers in selected science and engineering curriculum. Teachers' knowledge, goals, and beliefs regarding Delaware's adoption of new elementary engineering curriculum were surveyed using an adapted version of the Design, Engineering, and Technology Survey (Hong, Purser, & Gardella, 2011; Yaser, Baker, Carpius, Krauss, & Roberts, 2006). Also, three open ended questions sought to reveal deeper understanding of teacher knowledge and understanding of engineering; their concerns about personal and systemic resources related to the new curriculum, its logistics, and feasibility; and their beliefs about the potential positive impact presented by the engineering education initiative. Teacher concerns were analyzed using the Concerns-Based Adoption Model (Hall & Hord, 2010). Lay understandings of engineering were analyzed by contrasting naive representations of engineering with three key characteristics of engineering adapted from an earlier study (Capobianco Diefes-Dux, Mena, & Weller, 2011). Survey findings for teachers who had attended training and those who have not yet attended professional development in the new curriculum were compared with few notable differences. Almost all elementary teacher respondents were familiar with engineering and able to define it using one or more key characteristics. They valued the inclusion of engineering in the elementary curriculum; however trained and untrained teachers reported they were not confident about teaching it and were unaware of the new standards related to engineering. Teachers saw potential advantages or benefits of the new curriculum as helping improve science and math understanding, an opportunity to increase vocational awareness, and engaging students and motivating them to learn. Most teachers saw similar barriers to implementation- lack of teacher knowledge, lack of time to learn about engineering and how to teach engineering, and lack of administrative support. Almost all were open to additional in-service training to learn more about this new curriculum. Three fifth grade science units were examined for evidence of teacher pedagogical support in teaching two Science and Engineering Practices (SEP) advocated by the Next Generation Science Standards. An analytic framework was developed based upon two NGSS SEPs: Asking questions, defining problems and Engaging in argument from evidence. Findings revealed that the kits varied greatly in their pedagogical approaches to the two SEPs and differences might be explained by each kit's underlying orientations to the teaching-learning process. Findings from these investigations have implications for the design of professional development and for engineering curricula. They highlight the importance of considering teacher beliefs about curriculum implementation and subject matter, as well as the importance of creating curriculum materials that focus teacher attention toward student thinking and the language rich science and engineering practices. Recommendations also include ongoing professional development to allow teachers time to try out and revise pedagogical routines that support the SEPs studied here.

Academic dishonesty today, unethical practices tomorrow?

PubMed

LaDuke, Rebekah D

2013-01-01

The purpose of this article was to review the most current published literature on the topics of academic dishonesty, unethical professional practices, and research that studied the correlation between these 2 areas of interest. Literature was retrieved by utilizing key words such as academic dishonesty, cheating, workplace dishonesty, and unethical behavior. Multiple research databases were used and a reference librarian in locating relevant research studies resulting in 16 research articles reviewed and 7 articles referenced within the literature review. Upon completion, it became apparent that nursing educators should be concerned that nursing students found to be academically dishonest today may have a higher incidence of displaying unethical practices as a registered nurse tomorrow. It also became clear that the nursing profession needs to conduct its own research in this field to verify findings discovered by other professions such as engineering, business, and psychology. Finally, recommendations were given on how nursing educators should handle the topic of ethics in nursing programs. Copyright © 2013 Elsevier Inc. All rights reserved.

12 CFR 19.38 - Recommended decision and filing of record.

Code of Federal Regulations, 2010 CFR

2010-01-01

... PRACTICE AND PROCEDURE Uniform Rules of Practice and Procedure § 19.38 Recommended decision and filing of... allowed for filing reply briefs under § 19.37(b), the administrative law judge shall file with and certify... administrative law judge's recommended decision, recommended findings of fact, recommended conclusions of law...

Teaching Engineering Practices

NASA Astrophysics Data System (ADS)

Cunningham, Christine M.; Carlsen, William S.

2014-03-01

Engineering is featured prominently in the Next Generation Science Standards (NGSS) and related reform documents, but how its nature and methods are described is problematic. This paper is a systematic review and critique of that representation, and proposes that the disciplinary core ideas of engineering (as described in the NGSS) can be disregarded safely if the practices of engineering are better articulated and modeled through student engagement in engineering projects. A clearer distinction between science and engineering practices is outlined, and prior research is described that suggests that precollege engineering design can strengthen children's understandings about scientific concepts. However, a piecemeal approach to teaching engineering practices is unlikely to result in students understanding engineering as a discipline. The implications for science teacher education are supplemented with lessons learned from a number of engineering education professional development projects.

Exploiting Semantic Web Technologies to Develop OWL-Based Clinical Practice Guideline Execution Engines.

PubMed

Jafarpour, Borna; Abidi, Samina Raza; Abidi, Syed Sibte Raza

2016-01-01

Computerizing paper-based CPG and then executing them can provide evidence-informed decision support to physicians at the point of care. Semantic web technologies especially web ontology language (OWL) ontologies have been profusely used to represent computerized CPG. Using semantic web reasoning capabilities to execute OWL-based computerized CPG unties them from a specific custom-built CPG execution engine and increases their shareability as any OWL reasoner and triple store can be utilized for CPG execution. However, existing semantic web reasoning-based CPG execution engines suffer from lack of ability to execute CPG with high levels of expressivity, high cognitive load of computerization of paper-based CPG and updating their computerized versions. In order to address these limitations, we have developed three CPG execution engines based on OWL 1 DL, OWL 2 DL and OWL 2 DL + semantic web rule language (SWRL). OWL 1 DL serves as the base execution engine capable of executing a wide range of CPG constructs, however for executing highly complex CPG the OWL 2 DL and OWL 2 DL + SWRL offer additional executional capabilities. We evaluated the technical performance and medical correctness of our execution engines using a range of CPG. Technical evaluations show the efficiency of our CPG execution engines in terms of CPU time and validity of the generated recommendation in comparison to existing CPG execution engines. Medical evaluations by domain experts show the validity of the CPG-mediated therapy plans in terms of relevance, safety, and ordering for a wide range of patient scenarios.

Retrospective Perceptions and Views of Engineering Students about Physics and Engineering Practicals

ERIC Educational Resources Information Center

Bhathal, R.

2011-01-01

Hands-on practical work in physics and engineering has a long and well-established tradition in Australian universities. Recently, however, the question of whether hands-on physics and engineering practicals are useful for engineering students and whether they could be deleted or whether these could be replaced with computer simulations has been…

Engineering aids for the design of survivable defense communications transmission capability

NASA Astrophysics Data System (ADS)

Stover, H. A.

1984-01-01

Adequate military communications are essential to the security of the United States, especially in the various stages of major wars. Enough communications must survive to make effective use of our military forces and weaponry, even in the face of a concerted enemy effort to destroy those communications. An evolutionary approach to provide survivability is recommended. It must be provided by the design engineer. Afterthought and modification must be replaced with foresight and design. The engineer must make survivability a criterion in every design decision. The design engineer needs help with the challenges and associated details of successfully accomplishing this. The author discusses and recommends development of convenient-to-use survivability engineering design tools to provide this help.

Engineering education for youth: Diverse elementary school students' experiences with engineering design

NASA Astrophysics Data System (ADS)

Hegedus, Theresa

Lingering concerns over the persistent achievement gap amidst the trend of an increasingly diverse society have been compounded by calls from the Oval Office, the National Science Board, and nationwide media to also address our current creativity crisis. Now, more than ever, we have a responsibility to produce a STEM-capable (science, technology, engineering, and mathematics) workforce to meet the demands of our rapidly changing local and global economic landscape. Barriers exist in our traditional educational system, which has historically limited underrepresented groups' affiliation and membership in the disciplines of science and engineering. The recent incorporation of engineering into the latest science education reform efforts presents an opportunity to expose students as early as elementary school to engineering practices and habits of mind, which have the potential to stimulate creative thinking skills through engineering design. This qualitative study was designed to examine the ways in which engineering education has the potential to promote creativity and academic competence in elementary science classrooms. As a part of my study, a diverse group of students from two fifth-grade classrooms took part in a 10-12 hour, engineering-based curriculum unit (Engineering is Elementary) during their regular science instructional time. Using a sociocultural lens, to include cultural production and identities in practice as part of my framework, I analyzed group and individual performances through classroom observations, student interviews, and teacher reflections to better understand the meaning students made of their experiences with engineering. Findings from the study included the ways in which creativity was culturally produced in the classroom to include: 1) idea generation; 2) design and innovation; 3) gumption/resourcefulness; and 4) social value. Opportunities for collaboration increased through each stage of the unit culminating with the design challenge. Engineering teams required cultivation by the teacher as students negotiated spaces for collaboration through challenges of competition versus compromise; assumed versus assigned roles; management of verbal versus non-verbal communication; and shifts from teacher-as-authority-figure to peers as sources of knowledge and inspiration. The engineering design challenge provided an ideal context for broaching socio-scientific issues and attention to ethical considerations. Students made reference to their growing environmental awareness and developing moral reasoning in their definitions and reflections on green engineering. Throughout the course of the unit, successful students, struggling students, and students with uncertain trajectories established themselves as competent and efficacious engineers. Implications of the study include ways to assist teachers in recognizing and cultivating creativity and collaboration in addition to effectively incorporating socio-scientific issues as part of the engineering (and science) curriculum. I also present recommendations for promoting equity in classroom engineering, pre-service teacher initiatives, and strategies for capitalizing on the complementarity between science and engineering.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 25: The impact of language and culture on technical communication in Japan

NASA Technical Reports Server (NTRS)

Kohl, John R.; Barclay, Rebecca O.; Pinelli, Thomas E.; Keene, Michael L.; Kennedy, John M.

1993-01-01

One of the most significant developments in the field of technical communication during the 1980's and 1990's has been a growing interest in international technical communication, including technical communication in Japan. This article provides insights into aspects of the Japanese language and culture that affect Japanese technical communication practices. These insights are then used to interpret and report the results of a survey of Japanese aerospace engineers and scientists concerning the kinds of communication products they produce, the kinds they use, and the specific recommendation they would offer to designers of academic programs in technical communication.

NASA/DoD Aerospace Knowledge Diffusion Research Project. XXV - The impact of language and culture on technical communication in Japan

NASA Technical Reports Server (NTRS)

Kohl, John R.; Barclay, Rebecca O.; Pinelli, Thomas E.; Keene, Michael L.; Kennedy, John M.

1993-01-01

One of the most significant developments in the field of technical communication during the 1980s and 1990s has been a growing interest in international technical communication, including technical communication in Japan. This article provides insights into aspects of the Japanese language and culture that affect Japanese technical communication practices. The authors then use these insights to interpret and report the results of a survey of Japanese aerospace engineers and scientists concerning the kinds of communication products they produce, the kinds they use, and the specific recommendations they would offer to designers of academic programs in technical communication.

Relative Importance of Professional Practice and Engineering Management Competencies

ERIC Educational Resources Information Center

Pons, Dirk

2016-01-01

Problem: The professional practice of engineering always involves engineering management, but it is difficult to know what specifically to include in the undergraduate curriculum. Approach: The population of New Zealand practising engineers was surveyed to determine the importance they placed on specific professional practice and engineering…

Educating the Engineer of 2020: Adapting Engineering Education to the New Century

ERIC Educational Resources Information Center

National Academies Press, 2005

2005-01-01

"Educating the Engineer of 2020" is grounded by the observations, questions, and conclusions presented in the best-selling book "The Engineer of 2020: Visions of Engineering in the New Century." This new book offers recommendations on how to enrich and broaden engineering education so graduates are better prepared to work in a…

Are nutrition messages lost in transmission? Assessing the quality and consistency of diabetes guideline recommendations on the delivery of nutrition therapy.

PubMed

Hale, Kelli; Capra, Sandra; Bauer, Judy

2016-12-01

To provide an overview of (1) the consistency of Type 2 Diabetes Clinical Practice Guidelines recommendations on the delivery of nutrition therapy and (2) Clinical Practice Guideline quality. Large international clinical practice guideline repositories, diabetes organisation websites, and electronic databases (Pubmed, Scopus), were searched to identify Clinical Practice Guidelines for adults with type 2 diabetes published 2005 to August 2014. Recommendations on the delivery of nutrition therapy were extracted and inductive content analysis was used to analyse consistency. Two researchers independently assessed guideline quality using the AGREE II tool. Nine topics were identified from the recommendations. Overall the consistency of the recommendations was related to guideline type. Compared with nutrition-specific guidelines, the broad ones had a broader focus and included more patient-focused recommendations. The ten Clinical Practice Guidelines assessed included six broad guidelines and four nutrition specific guidelines. Based on AGREE II analysis, the broad guidelines were higher quality than nutrition-specific ones. Broad Clinical Practice Guidelines were higher quality and included more patient-focused recommendations than nutrition-specific ones. Our findings suggest a need for nutrition-specific guidelines to be modified to include greater patient-focus, or for practitioners delivering nutrition therapy to adopt broad Clinical Practice Guidelines. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Flight-vehicle structures education in the US: Assessment and recommendations

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.

1987-01-01

An assessment is made of the technical contents of flight-vehicle structures curricula at 41 U.S. universities with accredited aerospace engineering programs. The assessment is based on the technical needs for new and projected aeronautical and space systems as well as on the likely characteristics of the aerospace engineering work environment. A number of deficiencies and areas of concern are identified and recommendations are presented for enhancing the effectiveness of flight-vehicle structures education. A number of government supported programs that can help aerospace engineering education are listed in the appendix.

Canadian Guidelines for Controlled Pediatric Donation After Circulatory Determination of Death-Summary Report.

PubMed

Weiss, Matthew J; Hornby, Laura; Rochwerg, Bram; van Manen, Michael; Dhanani, Sonny; Sivarajan, V Ben; Appleby, Amber; Bennett, Mary; Buchman, Daniel; Farrell, Catherine; Goldberg, Aviva; Greenberg, Rebecca; Singh, Ram; Nakagawa, Thomas A; Witteman, William; Barter, Jill; Beck, Allon; Coughlin, Kevin; Conradi, Alf; Cupido, Cynthia; Dawson, Rosanne; Dipchand, Anne; Freed, Darren; Hornby, Karen; Langlois, Valerie; Mack, Cheryl; Mahoney, Meagan; Manhas, Deepak; Tomlinson, Christopher; Zavalkoff, Samara; Shemie, Sam D

2017-11-01

Create trustworthy, rigorous, national clinical practice guidelines for the practice of pediatric donation after circulatory determination of death in Canada. We followed a process of clinical practice guideline development based on World Health Organization and Canadian Medical Association methods. This included application of Grading of Recommendations Assessment, Development, and Evaluation methodology. Questions requiring recommendations were generated based on 1) 2006 Canadian donation after circulatory determination of death guidelines (not pediatric specific), 2) a multidisciplinary symposium of national and international pediatric donation after circulatory determination of death leaders, and 3) a scoping review of the pediatric donation after circulatory determination of death literature. Input from these sources drove drafting of actionable questions and Good Practice Statements, as defined by the Grading of Recommendations Assessment, Development, and Evaluation group. We performed additional literature reviews for all actionable questions. Evidence was assessed for quality using Grading of Recommendations Assessment, Development, and Evaluation and then formulated into evidence profiles that informed recommendations through the evidence-to-decision framework. Recommendations were revised through consensus among members of seven topic-specific working groups and finalized during meetings of working group leads and the planning committee. External review was provided by pediatric, critical care, and critical care nursing professional societies and patient partners. We generated 63 Good Practice Statements and seven Grading of Recommendations Assessment, Development, and Evaluation recommendations covering 1) ethics, consent, and withdrawal of life-sustaining therapy, 2) eligibility, 3) withdrawal of life-sustaining therapy practices, 4) ante and postmortem interventions, 5) death determination, 6) neonatal pediatric donation after circulatory determination of death, 7) cardiac and innovative pediatric donation after circulatory determination of death, and 8) implementation. For brevity, 48 Good Practice Statement and truncated justification are included in this summary report. The remaining recommendations, detailed methodology, full Grading of Recommendations Assessment, Development, and Evaluation tables, and expanded justifications are available in the full text report. This process showed that rigorous, transparent clinical practice guideline development is possible in the domain of pediatric deceased donation. Application of these recommendations will increase access to pediatric donation after circulatory determination of death across Canada and may serve as a model for future clinical practice guideline development in deceased donation.

Factors Influencing the Effectiveness of Systems Engineering Training and Education in the Department of Defense

DTIC Science & Technology

2011-04-30

learning. Recommendations are also presented for additional research into a more effective systems engineering andragogy . 15. SUBJECT TERMS 16...into a more effective systems engineering andragogy . Purpose Competency-based training for defense acquisition workers in the systems engineering

Four simple recommendations to encourage best practices in research software

PubMed Central

Jiménez, Rafael C.; Kuzak, Mateusz; Alhamdoosh, Monther; Barker, Michelle; Batut, Bérénice; Borg, Mikael; Capella-Gutierrez, Salvador; Chue Hong, Neil; Cook, Martin; Corpas, Manuel; Flannery, Madison; Garcia, Leyla; Gelpí, Josep Ll.; Gladman, Simon; Goble, Carole; González Ferreiro, Montserrat; Gonzalez-Beltran, Alejandra; Griffin, Philippa C.; Grüning, Björn; Hagberg, Jonas; Holub, Petr; Hooft, Rob; Ison, Jon; Katz, Daniel S.; Leskošek, Brane; López Gómez, Federico; Oliveira, Luis J.; Mellor, David; Mosbergen, Rowland; Mulder, Nicola; Perez-Riverol, Yasset; Pergl, Robert; Pichler, Horst; Pope, Bernard; Sanz, Ferran; Schneider, Maria V.; Stodden, Victoria; Suchecki, Radosław; Svobodová Vařeková, Radka; Talvik, Harry-Anton; Todorov, Ilian; Treloar, Andrew; Tyagi, Sonika; van Gompel, Maarten; Vaughan, Daniel; Via, Allegra; Wang, Xiaochuan; Watson-Haigh, Nathan S.; Crouch, Steve

2017-01-01

Scientific research relies on computer software, yet software is not always developed following practices that ensure its quality and sustainability. This manuscript does not aim to propose new software development best practices, but rather to provide simple recommendations that encourage the adoption of existing best practices. Software development best practices promote better quality software, and better quality software improves the reproducibility and reusability of research. These recommendations are designed around Open Source values, and provide practical suggestions that contribute to making research software and its source code more discoverable, reusable and transparent. This manuscript is aimed at developers, but also at organisations, projects, journals and funders that can increase the quality and sustainability of research software by encouraging the adoption of these recommendations. PMID:28751965

Four simple recommendations to encourage best practices in research software.

PubMed

Jiménez, Rafael C; Kuzak, Mateusz; Alhamdoosh, Monther; Barker, Michelle; Batut, Bérénice; Borg, Mikael; Capella-Gutierrez, Salvador; Chue Hong, Neil; Cook, Martin; Corpas, Manuel; Flannery, Madison; Garcia, Leyla; Gelpí, Josep Ll; Gladman, Simon; Goble, Carole; González Ferreiro, Montserrat; Gonzalez-Beltran, Alejandra; Griffin, Philippa C; Grüning, Björn; Hagberg, Jonas; Holub, Petr; Hooft, Rob; Ison, Jon; Katz, Daniel S; Leskošek, Brane; López Gómez, Federico; Oliveira, Luis J; Mellor, David; Mosbergen, Rowland; Mulder, Nicola; Perez-Riverol, Yasset; Pergl, Robert; Pichler, Horst; Pope, Bernard; Sanz, Ferran; Schneider, Maria V; Stodden, Victoria; Suchecki, Radosław; Svobodová Vařeková, Radka; Talvik, Harry-Anton; Todorov, Ilian; Treloar, Andrew; Tyagi, Sonika; van Gompel, Maarten; Vaughan, Daniel; Via, Allegra; Wang, Xiaochuan; Watson-Haigh, Nathan S; Crouch, Steve

2017-01-01

Scientific research relies on computer software, yet software is not always developed following practices that ensure its quality and sustainability. This manuscript does not aim to propose new software development best practices, but rather to provide simple recommendations that encourage the adoption of existing best practices. Software development best practices promote better quality software, and better quality software improves the reproducibility and reusability of research. These recommendations are designed around Open Source values, and provide practical suggestions that contribute to making research software and its source code more discoverable, reusable and transparent. This manuscript is aimed at developers, but also at organisations, projects, journals and funders that can increase the quality and sustainability of research software by encouraging the adoption of these recommendations.

Implementing AORN recommended practices for surgical attire.

PubMed

Braswell, Melanie L; Spruce, Lisa

2012-01-01

Surgical attire is intended to protect both patients and perioperative personnel. AORN published the "Recommended practices for surgical attire" to guide perioperative RNs in establishing protocols for selecting, wearing, and laundering surgical attire. Perioperative RNs should work with vendors and managers to ensure appropriate surgical attire is available, model the correct practices for donning and wearing surgical attire, and teach team members about evidence-based practices. The recommendation that surgical attire not be home laundered is supported by evidence that perioperative nurses can share with their colleagues and managers to help support appropriate practices. Hospital and ambulatory surgery center scenarios have been included as examples of appropriate execution of these recommended practices. Copyright © 2012 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Achieving Maximum Integration Utilizing Requirements Flow Down

NASA Technical Reports Server (NTRS)

Archiable, Wes; Askins, Bruce

2011-01-01

A robust and experienced systems engineering team is essential for a successful program. It is often a challenge to build a core systems engineering team early enough in a program to maximize integration and assure a common path for all supporting teams in a project. Ares I was no exception. During the planning of IVGVT, the team had many challenges including lack of: early identification of stakeholders, team training in NASA s system engineering practices, solid requirements flow down and a top down documentation strategy. The IVGVT team started test planning early in the program before the systems engineering framework had been matured due to an aggressive schedule. Therefore the IVGVT team increased their involvement in the Constellation systems engineering effort. Program level requirements were established that flowed down to IVGVT aligning all stakeholders to a common set of goals. The IVGVT team utilized the APPEL REQ Development Management course providing the team a NASA focused model to follow. The IVGVT team engaged directly with the model verification and validation process to assure that a solid set of requirements drove the need for the test event. The IVGVT team looked at the initial planning state, analyzed the current state and then produced recommendations for the ideal future state of a wide range of systems engineering functions and processes. Based on this analysis, the IVGVT team was able to produce a set of lessons learned and to provide suggestions for future programs or tests to use in their initial planning phase.

40 CFR 69.52 - Non-motor vehicle diesel fuel.

Code of Federal Regulations, 2014 CFR

2014-07-01

... diesel vehicles and engines Its use may damage these vehicles and engines. For use in all other diesel vehicles and engines. (ii) 15 ppm sulfur diesel fuel. From June 1, 2006 through May 31, 2010. ULTRA-LOW... and engines. Recommended for use in all diesel vehicles and engines. (iii) 15 ppm sulfur diesel fuel...

The Japanese Clinical Practice Guidelines for Management of Sepsis and Septic Shock 2016 (J-SSCG 2016).

PubMed

Nishida, Osamu; Ogura, Hiroshi; Egi, Moritoki; Fujishima, Seitaro; Hayashi, Yoshiro; Iba, Toshiaki; Imaizumi, Hitoshi; Inoue, Shigeaki; Kakihana, Yasuyuki; Kotani, Joji; Kushimoto, Shigeki; Masuda, Yoshiki; Matsuda, Naoyuki; Matsushima, Asako; Nakada, Taka-Aki; Nakagawa, Satoshi; Nunomiya, Shin; Sadahiro, Tomohito; Shime, Nobuaki; Yatabe, Tomoaki; Hara, Yoshitaka; Hayashida, Kei; Kondo, Yutaka; Sumi, Yuka; Yasuda, Hideto; Aoyama, Kazuyoshi; Azuhata, Takeo; Doi, Kent; Doi, Matsuyuki; Fujimura, Naoyuki; Fuke, Ryota; Fukuda, Tatsuma; Goto, Koji; Hasegawa, Ryuichi; Hashimoto, Satoru; Hatakeyama, Junji; Hayakawa, Mineji; Hifumi, Toru; Higashibeppu, Naoki; Hirai, Katsuki; Hirose, Tomoya; Ide, Kentaro; Kaizuka, Yasuo; Kan'o, Tomomichi; Kawasaki, Tatsuya; Kuroda, Hiromitsu; Matsuda, Akihisa; Matsumoto, Shotaro; Nagae, Masaharu; Onodera, Mutsuo; Ohnuma, Tetsu; Oshima, Kiyohiro; Saito, Nobuyuki; Sakamoto, So; Sakuraya, Masaaki; Sasano, Mikio; Sato, Norio; Sawamura, Atsushi; Shimizu, Kentaro; Shirai, Kunihiro; Takei, Tetsuhiro; Takeuchi, Muneyuki; Takimoto, Kohei; Taniguchi, Takumi; Tatsumi, Hiroomi; Tsuruta, Ryosuke; Yama, Naoya; Yamakawa, Kazuma; Yamashita, Chizuru; Yamashita, Kazuto; Yoshida, Takeshi; Tanaka, Hiroshi; Oda, Shigeto

2018-01-01

The Japanese Clinical Practice Guidelines for Management of Sepsis and Septic Shock 2016 (J-SSCG 2016), a Japanese-specific set of clinical practice guidelines for sepsis and septic shock created jointly by the Japanese Society of Intensive Care Medicine and the Japanese Association for Acute Medicine, was first released in February 2017 and published in the Journal of JSICM , [2017; Volume 24 (supplement 2)] 10.3918/jsicm.24S0001 and Journal of Japanese Association for Acute Medicine [2017; Volume 28, (supplement 1)] http://onlinelibrary.wiley.com/doi/10.1002/jja2.2017.28.issue-S1/issuetoc.This abridged English edition of the J-SSCG 2016 was produced with permission from the Japanese Association of Acute Medicine and the Japanese Society for Intensive Care Medicine. Members of the Japanese Society of Intensive Care Medicine and the Japanese Association for Acute Medicine were selected and organized into 19 committee members and 52 working group members. The guidelines were prepared in accordance with the Medical Information Network Distribution Service (Minds) creation procedures. The Academic Guidelines Promotion Team was organized to oversee and provide academic support to the respective activities allocated to each Guideline Creation Team. To improve quality assurance and workflow transparency, a mutual peer review system was established, and discussions within each team were open to the public. Public comments were collected once after the initial formulation of a clinical question (CQ) and twice during the review of the final draft. Recommendations were determined to have been adopted after obtaining support from a two-thirds (> 66.6%) majority vote of each of the 19 committee members. A total of 87 CQs were selected among 19 clinical areas, including pediatric topics and several other important areas not covered in the first edition of the Japanese guidelines (J-SSCG 2012). The approval rate obtained through committee voting, in addition to ratings of the strengths of the recommendation, and its supporting evidence were also added to each recommendation statement. We conducted meta-analyses for 29 CQs. Thirty-seven CQs contained recommendations in the form of an expert consensus due to insufficient evidence. No recommendations were provided for five CQs. Based on the evidence gathered, we were able to formulate Japanese-specific clinical practice guidelines that are tailored to the Japanese context in a highly transparent manner. These guidelines can easily be used not only by specialists, but also by non-specialists, general clinicians, nurses, pharmacists, clinical engineers, and other healthcare professionals.

40 CFR 90.118 - Certification procedure-service accumulation and usage of deterioration factors.

Code of Federal Regulations, 2010 CFR

2010-07-01

... recommended lubrication and filter changes, may be performed during service accumulation without the... on the test engine(s). (e) For purposes of establishing whether Phase 2 engines comply with...

General recommendations on immunization --- recommendations of the Advisory Committee on Immunization Practices (ACIP).

PubMed

2011-01-28

This report is a revision of the General Recommendations on Immunization and updates the 2006 statement by the Advisory Committee on Immunization Practices (ACIP) (CDC. General recommendations on immunization: recommendations of the Advisory Committee on Immunization Practices [ACIP]. MMWR 2006;55[No. RR-15]). The report also includes revised content from previous ACIP recommendations on the following topics: adult vaccination (CDC. Update on adult immunization recommendations of the immunization practices Advisory Committee [ACIP]. MMWR 1991;40[No. RR-12]); the assessment and feedback strategy to increase vaccination rates (CDC. Recommendations of the Advisory Committee on Immunization Practices: programmatic strategies to increase vaccination rates-assessment and feedback of provider-based vaccination coverage information. MMWR 1996;45:219-20); linkage of vaccination services and those of the Supplemental Nutrition Program for Women, Infants, and Children (WIC program) (CDC. Recommendations of the Advisory Committee on Immunization Practices: programmatic strategies to increase vaccination coverage by age 2 years-linkage of vaccination and WIC services. MMWR 1996;45:217-8); adolescent immunization (CDC. Immunization of adolescents: recommendations of the Advisory Committee on Immunization Practices, the American Academy of Pediatrics, the American Academy of Family Physicians, and the American Medical Association. MMWR 1996;45[No. RR-13]); and combination vaccines (CDC. Combination vaccines for childhood immunization: recommendations of the Advisory Committee on Immunization Practices [ACIP], the American Academy of Pediatrics [AAP], and the American Academy of Family Physicians [AAFP]. MMWR 1999;48[No. RR-5]). Notable revisions to the 2006 recommendations include 1) revisions to the tables of contraindications and precautions to vaccination, as well as a separate table of conditions that are commonly misperceived as contraindications and precautions; 2) reordering of the report content, with vaccine risk-benefit screening, managing adverse reactions, reporting of adverse events, and the vaccine injury compensation program presented immediately after the discussion of contraindications and precautions; 3) stricter criteria for selecting an appropriate storage unit for vaccines; 4) additional guidance for maintaining the cold chain in the event of unavoidable temperature deviations; and 5) updated revisions for vaccination of patients who have received a hematopoietic cell transplant. The most recent ACIP recommendations for each specific vaccine should be consulted for comprehensive details. This report, ACIP recommendations for each vaccine, and additional information about vaccinations are available from CDC at http://www.cdc.gov/vaccines.

33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

Code of Federal Regulations, 2014 CFR

2014-07-01

... incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... plan incorporate best available technology and recommended industry practices? Each applicant must... industry practices as directed in § 148.730 of this part. [USCG-1998-3884, 71 FR 57651, Sept. 29, 2006, as...

33 CFR 148.722 - Should the construction plan incorporate best available technology and recommended industry...

Code of Federal Regulations, 2013 CFR

2013-07-01

... incorporate best available technology and recommended industry practices? 148.722 Section 148.722 Navigation... plan incorporate best available technology and recommended industry practices? Each applicant must... industry practices as directed in § 148.730 of this part. [USCG-1998-3884, 71 FR 57651, Sept. 29, 2006, as...

30 CFR 250.114 - How must I install and operate electrical equipment?

Code of Federal Regulations, 2012 CFR

2012-07-01

... their facilities. (a) You must classify all areas according to API RP 500, Recommended Practice for... 1 and Division 2, or API RP 505, Recommended Practice for Classification of Locations for Electrical... electrical systems according to API RP 14F, Recommended Practice for Design and Installation of Electrical...

30 CFR 250.114 - How must I install and operate electrical equipment?

Code of Federal Regulations, 2014 CFR

2014-07-01

... their facilities. (a) You must classify all areas according to API RP 500, Recommended Practice for... 1 and Division 2, or API RP 505, Recommended Practice for Classification of Locations for Electrical... electrical systems according to API RP 14F, Recommended Practice for Design and Installation of Electrical...

30 CFR 250.114 - How must I install and operate electrical equipment?

Code of Federal Regulations, 2013 CFR

2013-07-01

... their facilities. (a) You must classify all areas according to API RP 500, Recommended Practice for... 1 and Division 2, or API RP 505, Recommended Practice for Classification of Locations for Electrical... electrical systems according to API RP 14F, Recommended Practice for Design and Installation of Electrical...

Error, contradiction and reversal in science and medicine.

PubMed

Coccheri, Sergio

2017-06-01

Error and contradictions are not "per se" detrimental in science and medicine. Going back to the history of philosophy, Sir Francis Bacon stated that "truth emerges more readily from error than from confusion", and recently Popper introduced the concept of an approximate temporary truth that constitutes the engine of scientific progress. In biomedical research and in clinical practice we assisted during the last decades to many overturnings or reversals of concepts and practices. This phenomenon may discourage patients from accepting ordinary medical care and may favour the choice of alternative medicine. The media often enhance the disappointment for these discrepancies. In this note I recommend to transfer to patients the concept of a confirmed and dependable knowledge at the present time. However, physicians should tolerate uncertainty and accept the idea that medical concepts and applications are subjected to continuous progression, change and displacement. Copyright © 2017 European Federation of Internal Medicine. Published by Elsevier B.V. All rights reserved.

Studying Science and Engineering Learning in Practice

ERIC Educational Resources Information Center

Penuel, William R.

2016-01-01

A key goal of science and engineering education is to provide opportunities for people to access, interpret, and make use of science and engineering to address practical human needs. Most education research, however, focuses on how best to prepare students in schools to participate in forms of science and engineering practices that resemble those…

40 CFR 86.098-23 - Required data.

Code of Federal Regulations, 2010 CFR

2010-07-01

... accordance with good engineering practice to assure that the engines covered by a certificate issued under... and conducted in accordance with good engineering practice to assure that the vehicles covered by a... systems are designed, using good engineering practice, to meet the standards of § 86.096-10 or § 86.098-11...

LOW-ENGINE-FRICTION TECHNOLOGY FOR ADVANCED NATURAL-GAS RECIPROCATING ENGINES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Victor Wong; Tian Tian; Luke Moughon

2005-09-30

This program aims at improving the efficiency of advanced natural-gas reciprocating engines (ANGRE) by reducing piston and piston ring assembly friction without major adverse effects on engine performance, such as increased oil consumption and wear. An iterative process of simulation, experimentation and analysis is being followed towards achieving the goal of demonstrating a complete optimized low-friction engine system. To date, a detailed set of piston and piston-ring dynamic and friction models have been developed and applied that illustrate the fundamental relationships between design parameters and friction losses. Low friction ring designs have already been recommended in a previous phase, withmore » full-scale engine validation partially completed. Current accomplishments include the addition of several additional power cylinder design areas to the overall system analysis. These include analyses of lubricant and cylinder surface finish and a parametric study of piston design. The Waukesha engine was found to be already well optimized in the areas of lubricant, surface skewness and honing cross-hatch angle, where friction reductions of 12% for lubricant, and 5% for surface characteristics, are projected. For the piston, a friction reduction of up to 50% may be possible by controlling waviness alone, while additional friction reductions are expected when other parameters are optimized. A total power cylinder friction reduction of 30-50% is expected, translating to an engine efficiency increase of two percentage points from its current baseline towards the goal of 50% efficiency. Key elements of the continuing work include further analysis and optimization of the engine piston design, in-engine testing of recommended lubricant and surface designs, design iteration and optimization of previously recommended technologies, and full-engine testing of a complete, optimized, low-friction power cylinder system.« less

Appendix C: Rapid development approaches for system engineering and design

NASA Technical Reports Server (NTRS)

1993-01-01

Conventional system architectures, development processes, and tool environments often produce systems which exceed cost expectations and are obsolete before they are fielded. This paper explores some of the reasons for this and provides recommendations for how we can do better. These recommendations are based on DoD and NASA system developments and on our exploration and development of system/software engineering tools.

Forum for Injection Technique and Therapy Expert Recommendations, India: The Indian Recommendations for Best Practice in Insulin Injection Technique, 2017

PubMed Central

Tandon, Nikhil; Kalra, Sanjay; Balhara, Yatan Pal Singh; Baruah, Manash P.; Chadha, Manoj; Chandalia, Hemraj B.; Prasanna Kumar, K. M.; Madhu, S. V.; Mithal, Ambrish; Sahay, Rakesh; Shukla, Rishi; Sundaram, Annamalai; Unnikrishnan, Ambika G.; Saboo, Banshi; Gupta, Vandita; Chowdhury, Subhankar; Kesavadev, Jothydev; Wangnoo, Subhash K.

2017-01-01

Health-care professionals in India frequently manage injection or infusion therapies in persons with diabetes (PWD). Patients taking insulin should know the importance of proper needle size, correct injection process, complication avoidance, and all other aspects of injection technique from the first visit onward. To assist health-care practitioners in their clinical practice, Forum for Injection Technique and Therapy Expert Recommendations, India, has updated the practical advice and made it more comprehensive evidence-based best practice information. Adherence to these updated recommendations, learning, and translating them into clinical practice should lead to effective therapies, improved outcomes, and lower costs for PWD. PMID:28670547

Implementing AORN recommended practices for a safe environment of care.

PubMed

Hughes, Antonia B

2013-08-01

Providing a safe environment for every patient undergoing a surgical or other invasive procedure is imperative. AORN's "Recommended practices for a safe environment of care" provides guidance on a wide range of topics related to the safety of perioperative patients and health care personnel. The recommendations are intended to provide guidance for establishing best practices and implementing safety measures in all perioperative practice settings. Perioperative nurses should be aware of risks related to musculoskeletal injuries, fire, equipment, latex, and chemicals, among others, and understand strategies for reducing the risks. Evidence-based recommendations can give practitioners the tools to guide safe practice. Copyright © 2013 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Reversing the pipeline? Implementing public health evidence-based guidance in english local government.

PubMed

Atkins, Lou; Kelly, Michael P; Littleford, Clare; Leng, Gillian; Michie, Susan

2017-05-12

In the UK, responsibility for many public health functions was transferred in 2013 from the National Health Service (NHS) to local government; a very different political context and one without the NHS history of policy and practice being informed by evidence-based guidelines. A problem this move presented was whether evidence-based guidelines would be seen as relevant, useful and implementable within local government. This study investigates three aspects of implementing national evidence-based recommendations for public health within a local government context: influences on implementation, how useful guidelines are perceived to be and whether the linear evidence-guidelines-practice model is considered relevant. Thirty-one councillors, public health directors and deputy directors and officers and other local government employees were interviewed about their experiences implementing evidence-based guidelines. Interviews were informed and analysed using a theoretical model of behaviour (COM-B; Capability, Opportunity, Motivation-Behaviour). Contextual issues such as budget, capacity and political influence were important influences on implementation. Guidelines were perceived to be of limited use, with concerns expressed about recommendations being presented in the abstract, lacking specificity and not addressing the complexity of situations or local variations. Local evidence was seen as the best starting point, rather than evidence-based guidance produced by the traditional linear 'evidence-guidelines-practice' model. Local evidence was used to not only provide context for recommendations but also replace recommendations when they conflicted with local evidence. Local government users do not necessarily consider national guidelines to be fit for purpose at local level, with the consequence that local evidence tends to trump evidence-based guidelines. There is thus a tension between the traditional model of guideline development and the needs of public health decision-makers and practitioners working in local government. This tension needs to be addressed to facilitate implementation. One way this might be achieved, and participants supported this approach, would be to reverse or re-engineer the traditional pipeline of guideline development by starting with local need and examples of effective local practice rather than starting with evidence of effectiveness synthesised from the international scientific literature. Alternatively, and perhaps in addition, training about the relevance of research evidence should become a routine for local government staff and councillors.

Knowledge and practices regarding iodine supplementation: A national survey of healthcare providers.

PubMed

Guess, Kimberly; Malek, Lenka; Anderson, Amanda; Makrides, Maria; Zhou, Shao J

2017-02-01

Little is known of healthcare providers' awareness and implementation of the National Health and Medical Research Council's recommendation regarding iodine supplementation during pre-conception, pregnancy and lactation. To assess knowledge and practices of Australian healthcare providers in relation to the National Health and Medical Research Council's iodine supplement recommendation. Obstetricians, gynaecologists, general practitioners, dietitians and midwives were recruited through their relevant professional bodies to participate in an online survey. The survey was completed by 396 healthcare providers Australia-wide. While 71% of healthcare providers' were aware of the National Health and Medical Research Council's recommendation for iodine supplementation, fewer were aware of the recommended dose (38%) or duration (44%). Seventy-three percent of healthcare providers recommended iodine supplements in pregnancy, 56% when planning pregnancy and 52% during lactation. The main reasons for not recommending iodine supplements included belief there was no need for iodine supplements due to mandatory iodine fortification of food (28%) and unawareness of the recommendation (25%). Awareness of the recommendation was positively associated with recommending iodine supplements while length of practice, time spent per consultation, age or area of practice were not associated with recommending iodine supplements. There is a need to improve healthcare providers' knowledge of and adherence to the National Health and Medical Research Council's iodine supplement recommendation. Strategies within antenatal and postnatal services, as well as public health initiatives, are required to improve the knowledge and practices of healthcare providers. Copyright © 2016 Australian College of Midwives. Published by Elsevier Ltd. All rights reserved.

12 CFR 263.38 - Recommended decision and filing of record.

Code of Federal Regulations, 2010 CFR

2010-01-01

... FEDERAL RESERVE SYSTEM RULES OF PRACTICE FOR HEARINGS Uniform Rules of Practice and Procedure § 263.38... expiration of the time allowed for filing reply briefs under § 263.37(b), the administrative law judge shall... the administrative law judge's recommended decision, recommended findings of fact, recommended...

Project-oriented teaching model about specialized courses in the information age

NASA Astrophysics Data System (ADS)

Chen, Xiaodong; Wang, Jinjiang; Tian, Qingguo; Wang, Yi; Cai, Huaiyu

2017-08-01

Specialized courses play a significant role in the usage of basic knowledge in the practical application for engineering college students. The engineering data available has sharply increased since the beginning of the information age in the 20th century, providing much more approaches to study and practice. Therefore, how to guide students to make full use of resources for active engineering practice learning has become one of the key problems for specialized courses. This paper took the digital image processing course for opto-electronic information science and technology major as an example, discussed the teaching model of specialized course in the information age, put forward the "engineering resource oriented model", and fostered the ability of engineering students to use the basic knowledge to innovate and deal with specific project objectives. The fusion of engineering examples into practical training and teaching encourages students to practice independent engineering thinking.

The Roles of Engineering Notebooks in Shaping Elementary Engineering Student Discourse and Practice

ERIC Educational Resources Information Center

Hertel, Jonathan D.; Cunningham, Christine M.; Kelly, Gregory J.

2017-01-01

Engineering design challenges offer important opportunities for students to learn science and engineering knowledge and practices. This study examines how students' engineering notebooks across four units of the curriculum "Engineering is Elementary" (EiE) support student work during design challenges. Through educational ethnography and…

Software Engineering Laboratory Series: Proceedings of the Twentieth Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1995-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 15

NASA Technical Reports Server (NTRS)

1997-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 14

NASA Technical Reports Server (NTRS)

1996-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 13

NASA Technical Reports Server (NTRS)

1995-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

40 CFR 1051.125 - What maintenance instructions must I give to buyers?

Code of Federal Regulations, 2013 CFR

2013-07-01

... necessary. This might include adding engine oil, changing air, fuel, or oil filters, servicing engine... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Emission... the maintenance will be done at the recommended interval on in-use engines. In considering your...

40 CFR 1051.125 - What maintenance instructions must I give to buyers?

Code of Federal Regulations, 2012 CFR

2012-07-01

... necessary. This might include adding engine oil, changing air, fuel, or oil filters, servicing engine... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Emission... the maintenance will be done at the recommended interval on in-use engines. In considering your...

40 CFR 1051.125 - What maintenance instructions must I give to buyers?

Code of Federal Regulations, 2011 CFR

2011-07-01

... necessary. This might include adding engine oil, changing air, fuel, or oil filters, servicing engine... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Emission... the maintenance will be done at the recommended interval on in-use engines. In considering your...

40 CFR 1051.125 - What maintenance instructions must I give to buyers?

Code of Federal Regulations, 2014 CFR

2014-07-01

... necessary. This might include adding engine oil, changing air, fuel, or oil filters, servicing engine... (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Emission... the maintenance will be done at the recommended interval on in-use engines. In considering your...

77 FR 6143 - Committee on Equal Opportunities in Science and Engineering (CEOSE); Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-07

... NATIONAL SCIENCE FOUNDATION Committee on Equal Opportunities in Science and Engineering (CEOSE... Opportunities in Science and Engineering (1173). Dates/Time: February 28, 2012, 9 a.m.-5:30 p.m., February 29... provide advice and recommendations concerning broadening participation in science and engineering. Agenda...

78 FR 60918 - Committee on Equal Opportunities in Science and Engineering; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-02

... NATIONAL SCIENCE FOUNDATION Committee on Equal Opportunities in Science and Engineering; Notice of... Engineering (1173). Dates/Time: October 30, 2013, 10:00 a.m.-3:30 p.m. Place: National Science Foundation... advice and recommendations concerning broadening participation in science and engineering. Agenda...

14 CFR 23.149 - Minimum control speed.

Code of Federal Regulations, 2012 CFR

2012-01-01

... extended; and (5) All propeller controls in the position recommended for approach with all engines... engine is suddenly made inoperative, it is possible to maintain control of the airplane with that engine... not more than 5 degrees. The method used to simulate critical engine failure must represent the most...

14 CFR 23.149 - Minimum control speed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... extended; and (5) All propeller controls in the position recommended for approach with all engines... engine is suddenly made inoperative, it is possible to maintain control of the airplane with that engine... not more than 5 degrees. The method used to simulate critical engine failure must represent the most...

Engineering Research in Irish Economic Development

ERIC Educational Resources Information Center

Kelly, John

2011-01-01

This article summarizes the main findings and recommendations of a report published in December 2010 by the Irish Academy of Engineering (IAE). The report, representing the views of a committee of distinguished Irish engineers from a wide range of disciplines, addresses the role of engineering research in Ireland's economic development and the…

Surfing the web during pandemic flu: availability of World Health Organization recommendations on prevention

PubMed Central

2010-01-01

Background People often search for information on influenza A(H1N1)v prevention on the web. The extent to which information found on the Internet is consistent with recommendations issued by the World Health Organization is unknown. Methods We conducted a search for "swine flu" accessing 3 of the most popular search engines through different proxy servers located in 4 English-speaking countries (Australia, Canada, UK, USA). We explored each site resulting from the searches, up to 4 clicks starting from the search engine page, analyzing availability of World Health Organization recommendations for swine flu prevention. Results Information on hand cleaning was reported on 79% of the 147 websites analyzed; staying home when sick was reported on 77.5% of the websites; disposing tissues after sneezing on 75.5% of the websites. Availability of other recommendations was lower. The probability of finding preventative recommendations consistent with World Health Organization varied by country, type of website, and search engine. Conclusions Despite media coverage on H1N1 influenza, relevant information for prevention is not easily found on the web. Strategies to improve information delivery to the general public through this channel should be improved. PMID:20854690

Surfing the web during pandemic flu: availability of World Health Organization recommendations on prevention.

PubMed

Gesualdo, Francesco; Romano, Mariateresa; Pandolfi, Elisabetta; Rizzo, Caterina; Ravà, Lucilla; Lucente, Daniela; Tozzi, Alberto E

2010-09-20

People often search for information on influenza A(H1N1)v prevention on the web. The extent to which information found on the Internet is consistent with recommendations issued by the World Health Organization is unknown. We conducted a search for "swine flu" accessing 3 of the most popular search engines through different proxy servers located in 4 English-speaking countries (Australia, Canada, UK, USA). We explored each site resulting from the searches, up to 4 clicks starting from the search engine page, analyzing availability of World Health Organization recommendations for swine flu prevention. Information on hand cleaning was reported on 79% of the 147 websites analyzed; staying home when sick was reported on 77.5% of the websites; disposing tissues after sneezing on 75.5% of the websites. Availability of other recommendations was lower. The probability of finding preventative recommendations consistent with World Health Organization varied by country, type of website, and search engine. Despite media coverage on H1N1 influenza, relevant information for prevention is not easily found on the web. Strategies to improve information delivery to the general public through this channel should be improved.

Study on the Optimal Groove Shape and Glue Material for Fiber Bragg Grating Measuring Bolts.

PubMed

Zhao, Yiming; Zhang, Nong; Si, Guangyao; Li, Xuehua

2018-06-02

Fiber Bragg grating (FBG) measuring bolts, as a useful tool to evaluate the behaviors of steel bolts in underground engineering, can be manufactured by gluing the FBG sensors inside the grooves, which are usually symmetrical cuts along the steel bolt rod. The selection of the cut shape and the glue types could perceivably affect the final supporting strength of the bolts. Unfortunately, the impact of cut shape and glue type on bolting strength is not yet clear. In this study, based on direct tension tests, full tensile load⁻displacement curves of rock bolts with different groove shapes were obtained and analyzed. The effects of groove shape on the bolt strength were discussed, and the stress redistribution in the cross-section of a rock bolt with different grooves was simulated using ANSYS. The results indicated that the trapezoidal groove is best for manufacturing the FBG bolt due to its low reduction of supporting strength. Four types of glues commonly used for the FBG sensors were assessed by conducting tensile tests on the mechanical testing and simulation system and the static and dynamic optical interrogators system. Using linear regression analysis, the relationship between the reflected wavelength of FBG sensors and tensile load was obtained. Practical recommendations for glue selection in engineering practice are also provided.

Implementing AORN Recommended Practices for Laser Safety.

PubMed

Castelluccio, Donna

2012-05-01

Lasers used in the OR pose many risks to both patients and personnel. AORN's "Recommended practices for laser safety in perioperative practice settings" identifies the potential hazards associated with laser use, such as eye damage and fire- and smoke-related injuries. The practice recommendations are intended to be used as a guide for establishing best practices in the workplace and to give perioperative nurses strategies for implementing the recommended safety measures. A laser safety program should include measures to control access to laser use areas; protect staff members and patients from exposure to the laser beam; provide staff members and patients with the appropriate safety eyewear for use in the laser use area; and protect staff members and patients from surgical smoke, electrical, and fire hazards. Measures such as using a safety checklist or creating a laser cart can help perioperative nurses successfully incorporate the practice recommendations. Patient scenarios are included as examples of how to use the document in real-life situations. Copyright © 2012 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Variable implementation of good practice recommendations for the assessment and management of UK children with neurodisability.

PubMed

Gray, L; Gibbs, J; Jolleff, N; Williams, J; McConachie, H; Parr, J R

2015-11-01

The aims of this study were to determine whether UK child development teams (CDTs) have implemented good practice recommendations for the co-ordinated assessment and support of children with neurodisability and to explore some of the factors associated with variations in good practice implementation. Surveys were sent to every UK CDT in 2009/2010. Responses about CDT provision and ways of working were compared with good practice recommendations from national policy documents and professional organizations. The extent to which CDTs in England and Wales met 11 selected good practice recommendations was scored; teams in Scotland and Northern Ireland were given a score out of 9 to reflect the optional use of the common assessment framework and early support materials in these countries. Responses were received from 225/240 (94%) UK CDTs. Thirty-seven per cent of CDTs in England and Wales had implemented nine or more of the 11 recommendations. Fifty-nine per cent of teams in Scotland and 78% of teams in Northern Ireland met between six and nine recommendations of good working practice. Higher levels of implementation of recommendations were found when the CDT had a Child Development Centre base and for teams who had received increased funding in the 5 years preceding the survey. There was considerable variability in the degree to which CDTs implemented good practice recommendations for the diagnosis and management of children with neurodisability. Evidence about child and parent satisfaction, and the effectiveness of CDT practices and provision, is required, so policymakers, healthcare commissioners and clinicians can provide the most appropriate services to children with neurodisability and their families. © 2015 John Wiley & Sons Ltd.

[Joint contractures in nursing textbooks].

PubMed

Bartoszek, G; Meyer, G; Thiesemann, R

2014-01-01

The transparency criteria of the German statutory health insurance on joint contracture prevention have led to controversies about the appropriate assessment, prevention and treatment as well as to various actions in nursing practice. However, appropriate nursing assessments and proven treatment options are lacking so far. It is unclear whether textbooks on nursing reflect these uncertainties. Search for textbooks on nursing through internet-based search engines and publisher registers, data extraction by one investigator and control by a second. A total of 35 textbooks with contributions on joint contractures were identified of which 25 included a definition, causes/risk factors are presented in 32 textbooks and assessments are presented in 5 books. Most often positioning into a physiological or functional neutral position and passive moving of limbs are recommended as passive prophylaxis. Recommended therapeutic and preventive options do not differ. None of the textbooks reflect that there is a lack of scientific knowledge on the subject. Textbooks on nursing do not deal with complete and scientific sound information on joint contractures.

Performance of a Line Loss Correction Method for Gas Turbine Emission Measurements

NASA Astrophysics Data System (ADS)

Hagen, D. E.; Whitefield, P. D.; Lobo, P.

2015-12-01

International concern for the environmental impact of jet engine exhaust emissions in the atmosphere has led to increased attention on gas turbine engine emission testing. The Society of Automotive Engineers Aircraft Exhaust Emissions Measurement Committee (E-31) has published an Aerospace Information Report (AIR) 6241 detailing the sampling system for the measurement of non-volatile particulate matter from aircraft engines, and is developing an Aerospace Recommended Practice (ARP) for methodology and system specification. The Missouri University of Science and Technology (MST) Center for Excellence for Aerospace Particulate Emissions Reduction Research has led numerous jet engine exhaust sampling campaigns to characterize emissions at different locations in the expanding exhaust plume. Particle loss, due to various mechanisms, occurs in the sampling train that transports the exhaust sample from the engine exit plane to the measurement instruments. To account for the losses, both the size dependent penetration functions and the size distribution of the emitted particles need to be known. However in the proposed ARP, particle number and mass are measured, but size is not. Here we present a methodology to generate number and mass correction factors for line loss, without using direct size measurement. A lognormal size distribution is used to represent the exhaust aerosol at the engine exit plane and is defined by the measured number and mass at the downstream end of the sample train. The performance of this line loss correction is compared to corrections based on direct size measurements using data taken by MST during numerous engine test campaigns. The experimental uncertainty in these correction factors is estimated. Average differences between the line loss correction method and size based corrections are found to be on the order of 10% for number and 2.5% for mass.

Flight-vehicle structures education in the United States Assessment and recommendations

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.; Dixon, S. C.

1987-01-01

An assessment is made of the technical contents of flight-vehicle structures curricula at 41 U.S. universities with accredited aerospace engineering programs. The assessment is based on the technical needs for the new and projected aeronautical and space systems as well as on the likely characteristics of the aerospace engineering work environment. A number of deficiencies and areas of concern are identified and recommendations are presented for enhancing the effectiveness of flight-vehicle structures education. A number of government supported programs that can help aerospace engineering education are listed in the appendix.

GN&C Engineering Best Practices for Human-Rated Spacecraft Systems

NASA Technical Reports Server (NTRS)

Dennehy, Cornelius J.; Lebsock, Kenneth; West, John

2007-01-01

The NASA Engineering and Safety Center (NESC) recently completed an in-depth assessment to identify a comprehensive set of engineering considerations for the Design, Development, Test and Evaluation (DDT&E) of safe and reliable human-rated spacecraft systems. Reliability subject matter experts, discipline experts, and systems engineering experts were brought together to synthesize the current "best practices" both at the spacecraft system and subsystems levels. The objective of this paper is to summarize, for the larger Community of Practice, the initial set of Guidance, Navigation and Control (GN&C) engineering Best Practices as identified by this NESC assessment process.

GN&C Engineering Best Practices for Human-Rated Spacecraft System

NASA Technical Reports Server (NTRS)

Dennehy, Cornelius J.; Lebsock, Kenneth; West, John

2008-01-01

The NASA Engineering and Safety Center (NESC) recently completed an in-depth assessment to identify a comprehensive set of engineering considerations for the Design, Development, Test and Evaluation (DDT&E) of safe and reliable human-rated spacecraft systems. Reliability subject matter experts, discipline experts, and systems engineering experts were brought together to synthesize the current "best practices" both at the spacecraft system and subsystems levels. The objective of this paper is to summarize, for the larger Community of Practice, the initial set of Guidance, Navigation and Control (GN&C) engineering Best Practices as identified by this NESC assessment process.

GN&C Engineering Best Practices For Human-Rated Spacecraft Systems

NASA Technical Reports Server (NTRS)

Dennehy, Cornelius J.; Lebsock, Kenneth; West, John

2007-01-01

The NASA Engineering and Safety Center (NESC) recently completed an in-depth assessment to identify a comprehensive set of engineering considerations for the Design, Development, Test and Evaluation (DDT&E) of safe and reliable human-rated spacecraft systems. Reliability subject matter experts, discipline experts, and systems engineering experts were brought together to synthesize the current "best practices" both at the spacecraft system and subsystems levels. The objective of this paper is to summarize, for the larger Community of Practice, the initial set of Guidance, Navigation and Control (GN&C) engineering Best Practices as identified by this NESC assessment process.

The CanPain SCI Clinical Practice Guidelines for Rehabilitation Management of Neuropathic Pain after Spinal Cord: screening and diagnosis recommendations.

PubMed

Mehta, S; Guy, S D; Bryce, T N; Craven, B C; Finnerup, N B; Hitzig, S L; Orenczuk, S; Siddall, P J; Widerström-Noga, E; Casalino, A; Côté, I; Harvey, D; Kras-Dupuis, A; Lau, B; Middleton, J W; Moulin, D E; O'Connell, C; Parrent, A G; Potter, P; Short, C; Teasell, R; Townson, A; Truchon, C; Wolfe, D; Bradbury, C L; Loh, E

2016-08-01

Clinical practice guidelines. To develop the first Canadian clinical practice guidelines for screening and diagnosis of neuropathic pain in people with spinal cord injury (SCI). The guidelines are relevant for inpatient and outpatient SCI rehabilitation settings in Canada. The CanPainSCI Working Group reviewed evidence to address clinical questions regarding screening and diagnosis of neuropathic pain after SCI. A consensus process was followed to achieve agreement on recommendations and clinical considerations. Twelve recommendations, based on expert consensus, were developed for the screening and diagnosis of neuropathic pain after SCI. The recommendations address methods for assessment, documentation tools, team member accountability, frequency of screening and considerations for diagnostic investigation. Important clinical considerations accompany each recommendation. The expert Working Group developed recommendations for the screening and diagnosis of neuropathic pain after SCI that should be used to inform practice.

Synthetic Biology: Engineering, Evolution and Design (SEED) Conference 2015

DTIC Science & Technology

2015-12-01

to promote optimal health. One such recommendation is the consumption of two fish meals per week, preferably fatty fish . This recommendation is prob...Soy oil can provide health benefits of 17 Oral Presentation Abstracts fish consumption , while decreasing dependence on marine sources of omega-3...metabolite feed-back inhibition. For example, the effect of oxygen availability on metabolically engineered E. coli systems was found to be a controlling

Knowledge-Acquisition Tool For Expert System

NASA Technical Reports Server (NTRS)

Disbrow, James D.; Duke, Eugene L.; Regenie, Victoria A.

1988-01-01

Digital flight-control systems monitored by computer program that evaluates and recommends. Flight-systems engineers for advanced, high-performance aircraft use knowlege-acquisition tool for expert-system flight-status monitor suppling interpretative data. Interpretative function especially important in time-critical, high-stress situations because it facilitates problem identification and corrective strategy. Conditions evaluated and recommendations made by ground-based engineers having essential knowledge for analysis and monitoring of performances of advanced aircraft systems.

NASA Spacecraft Fault Management Workshop Results

NASA Technical Reports Server (NTRS)

Newhouse, Marilyn; McDougal, John; Barley, Bryan; Fesq, Lorraine; Stephens, Karen

2010-01-01

Fault Management is a critical aspect of deep-space missions. For the purposes of this paper, fault management is defined as the ability of a system to detect, isolate, and mitigate events that impact, or have the potential to impact, nominal mission operations. The fault management capabilities are commonly distributed across flight and ground subsystems, impacting hardware, software, and mission operations designs. The National Aeronautics and Space Administration (NASA) Discovery & New Frontiers (D&NF) Program Office at Marshall Space Flight Center (MSFC) recently studied cost overruns and schedule delays for 5 missions. The goal was to identify the underlying causes for the overruns and delays, and to develop practical mitigations to assist the D&NF projects in identifying potential risks and controlling the associated impacts to proposed mission costs and schedules. The study found that 4 out of the 5 missions studied had significant overruns due to underestimating the complexity and support requirements for fault management. As a result of this and other recent experiences, the NASA Science Mission Directorate (SMD) Planetary Science Division (PSD) commissioned a workshop to bring together invited participants across government, industry, academia to assess the state of the art in fault management practice and research, identify current and potential issues, and make recommendations for addressing these issues. The workshop was held in New Orleans in April of 2008. The workshop concluded that fault management is not being limited by technology, but rather by a lack of emphasis and discipline in both the engineering and programmatic dimensions. Some of the areas cited in the findings include different, conflicting, and changing institutional goals and risk postures; unclear ownership of end-to-end fault management engineering; inadequate understanding of the impact of mission-level requirements on fault management complexity; and practices, processes, and tools that have not kept pace with the increasing complexity of mission requirements and spacecraft systems. This paper summarizes the findings and recommendations from that workshop, as well as opportunities identified for future investment in tools, processes, and products to facilitate the development of space flight fault management capabilities.

The development of clinical practice guidelines and guidance statements of the American College of Physicians: summary of methods.

PubMed

Qaseem, Amir; Snow, Vincenza; Owens, Douglas K; Shekelle, Paul

2010-08-03

The American College of Physicians (ACP) established its evidence-based clinical practice guidelines program in 1981. The ACP's Guidelines Committee and the staff of the Clinical Programs and Quality of Care Department develop the clinical recommendations. The ACP develops 2 different types of clinical recommendations: clinical practice guidelines and clinical guidance statements. The ACP clinical practice guidelines and guidance statements follow a multistep development process that includes a systematic review of the evidence, deliberation of the evidence by the committee, summary recommendations, and evidence and recommendation grading. All ACP clinical practice guidelines and clinical guidance statements, if not updated, are considered automatically withdrawn or invalid 5 years after publication or once an update has been issued.

Implementing AORN recommended practices for prevention of deep vein thrombosis.

PubMed

Van Wicklin, Sharon A

2011-11-01

One to two people per 1,000 are affected by deep vein thrombosis (DVT) or pulmonary embolism in the United States each year. AORN published its new "Recommended practices for prevention of deep vein thrombosis" to guide perioperative RNs in establishing organization-wide protocols for DVT prevention. Strategies for successful implementation of the recommended practices include taking a multidisciplinary approach to protocol development, providing education and guidance for performing preoperative patient assessments and administering DVT prophylaxis, and having appropriate resources and the facility's policy and procedure for DVT prevention readily available in the practice setting. Hospital and ambulatory patient scenarios have been included as examples of appropriate execution of the recommended practices. Copyright © 2011 AORN, Inc. Published by Elsevier Inc. All rights reserved.

The responsibilities of engineers.

PubMed

Smith, Justin; Gardoni, Paolo; Murphy, Colleen

2014-06-01

Knowledge of the responsibilities of engineers is the foundation for answering ethical questions about the work of engineers. This paper defines the responsibilities of engineers by considering what constitutes the nature of engineering as a particular form of activity. Specifically, this paper focuses on the ethical responsibilities of engineers qua engineers. Such responsibilities refer to the duties acquired in virtue of being a member of a group. We examine the practice of engineering, drawing on the idea of practices developed by philosopher Alasdair MacIntyre, and show how the idea of a practice is important for identifying and justifying the responsibilities of engineers. To demonstrate the contribution that knowledge of the responsibilities of engineers makes to engineering ethics, a case study from structural engineering is discussed. The discussion of the failure of the Sleipner A Platform off the coast of Norway in 1991 demonstrates how the responsibilities of engineers can be derived from knowledge of the nature of engineering and its context.

Canadian Guidelines for Controlled Pediatric Donation After Circulatory Determination of Death—Summary Report*

PubMed Central

Hornby, Laura; Rochwerg, Bram; van Manen, Michael; Dhanani, ; Sonny; Sivarajan, V. Ben; Appleby, Amber; Bennett, Mary; Buchman, Daniel; Farrell, Catherine; Goldberg, Aviva; Greenberg, Rebecca; Singh, Ram; Nakagawa, Thomas A.; Witteman, William; Barter, Jill; Beck, Allon; Coughlin, Kevin; Conradi, Alf; Cupido, Cynthia; Dawson, Rosanne; Dipchand, Anne; Freed, Darren; Hornby, Karen; Langlois, Valerie; Mack, Cheryl; Mahoney, Meagan; Manhas, Deepak; Tomlinson, Christopher; Zavalkoff, Samara; Shemie, Sam D.

2017-01-01

Objectives: Create trustworthy, rigorous, national clinical practice guidelines for the practice of pediatric donation after circulatory determination of death in Canada. Methods: We followed a process of clinical practice guideline development based on World Health Organization and Canadian Medical Association methods. This included application of Grading of Recommendations Assessment, Development, and Evaluation methodology. Questions requiring recommendations were generated based on 1) 2006 Canadian donation after circulatory determination of death guidelines (not pediatric specific), 2) a multidisciplinary symposium of national and international pediatric donation after circulatory determination of death leaders, and 3) a scoping review of the pediatric donation after circulatory determination of death literature. Input from these sources drove drafting of actionable questions and Good Practice Statements, as defined by the Grading of Recommendations Assessment, Development, and Evaluation group. We performed additional literature reviews for all actionable questions. Evidence was assessed for quality using Grading of Recommendations Assessment, Development, and Evaluation and then formulated into evidence profiles that informed recommendations through the evidence-to-decision framework. Recommendations were revised through consensus among members of seven topic-specific working groups and finalized during meetings of working group leads and the planning committee. External review was provided by pediatric, critical care, and critical care nursing professional societies and patient partners. Results: We generated 63 Good Practice Statements and seven Grading of Recommendations Assessment, Development, and Evaluation recommendations covering 1) ethics, consent, and withdrawal of life-sustaining therapy, 2) eligibility, 3) withdrawal of life-sustaining therapy practices, 4) ante and postmortem interventions, 5) death determination, 6) neonatal pediatric donation after circulatory determination of death, 7) cardiac and innovative pediatric donation after circulatory determination of death, and 8) implementation. For brevity, 48 Good Practice Statement and truncated justification are included in this summary report. The remaining recommendations, detailed methodology, full Grading of Recommendations Assessment, Development, and Evaluation tables, and expanded justifications are available in the full text report. Conclusions: This process showed that rigorous, transparent clinical practice guideline development is possible in the domain of pediatric deceased donation. Application of these recommendations will increase access to pediatric donation after circulatory determination of death across Canada and may serve as a model for future clinical practice guideline development in deceased donation. PMID:28925929

Examining the Extent to Which Select Teacher Preparation Experiences Inform Technology and Engineering Educators' Teaching of Science Content and Practices

ERIC Educational Resources Information Center

Love, Tyler S.

2015-01-01

With the recent release of the "Next Generation Science Standards" (NGSS) (NGSS Lead States, 2014b) science educators were expected to teach engineering content and practices within their curricula. However, technology and engineering (T&E) educators have been expected to teach content and practices from engineering and other…

Good Practice and Recommendations for Research Team Leadership

DTIC Science & Technology

2017-05-01

ARL-SR-0372 ● MAY 2017 US Army Research Laboratory Good Practice and Recommendations for Research Team Leadership by Mark L...Do not return it to the originator. ARL-SR-0372 ● MAY 2017 US Army Research Laboratory Good Practice and Recommendations for...information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services , Directorate for Information

Clinicians' practice environment is associated with a higher likelihood of recommending cesarean deliveries.

PubMed

Cheng, Yvonne W; Snowden, Jonathan M; Handler, Stephanie; Tager, Ira B; Hubbard, Alan; Caughey, Aaron B

2014-08-01

Little data exist regarding clinicians' role in the rising annual incidence rate of cesarean delivery in the US. We aimed to examine if clinicians' practice environment is associated with recommending cesarean deliveries. This is a survey study of clinicians who practice obstetrics in the US. This survey included eight clinical vignettes and 27 questions regarding clinicians' practice environment. Chi-square test and multivariable logistic regression were used for statistical comparison. Of 27 675 survey links sent, 3646 clinicians received and opened the survey electronically, and 1555 (43%) participated and 1486 (94%) completed the survey. Clinicians were categorized into three groups based on eight common obstetric vignettes as: more likely (n = 215), average likelihood (n = 1099), and less likely (n = 168) to recommend cesarean. Clinician environment factors associated with a higher likelihood of recommending cesarean included Laborists/Hospitalists practice model (p < 0.001), as-needed anesthesia support (p = 0.003), and rural/suburban practice setting (p < 0.001). We identified factors in clinicians' environment associated with their likelihood of recommending cesarean delivery. The decision to recommend cesarean delivery is a complicated one and is likely not solely based on patient factors.

29 CFR 1910.1017 - Vinyl chloride.

Code of Federal Regulations, 2011 CFR

2011-07-01

... this section by engineering, work practice, and personal protective controls as follows: (1) Feasible engineering and work practice controls shall immediately be used to reduce exposures to at or below the permissible exposure limit. (2) Wherever feasible engineering and work practice controls which can be...

29 CFR 1910.1017 - Vinyl chloride.

Code of Federal Regulations, 2010 CFR

2010-07-01

... this section by engineering, work practice, and personal protective controls as follows: (1) Feasible engineering and work practice controls shall immediately be used to reduce exposures to at or below the permissible exposure limit. (2) Wherever feasible engineering and work practice controls which can be...

The Design of the Internet's Architecture by the Internet Engineering Task Force (IETF) and Human Rights.

PubMed

Cath, Corinne; Floridi, Luciano

2017-04-01

The debate on whether and how the Internet can protect and foster human rights has become a defining issue of our time. This debate often focuses on Internet governance from a regulatory perspective, underestimating the influence and power of the governance of the Internet's architecture. The technical decisions made by Internet Standard Developing Organisations (SDOs) that build and maintain the technical infrastructure of the Internet influences how information flows. They rearrange the shape of the technically mediated public sphere, including which rights it protects and which practices it enables. In this article, we contribute to the debate on SDOs' ethical responsibility to bring their work in line with human rights. We defend three theses. First, SDOs' work is inherently political. Second, the Internet Engineering Task Force (IETF), one of the most influential SDOs, has a moral obligation to ensure its work is coherent with, and fosters, human rights. Third, the IETF should enable the actualisation of human rights through the protocols and standards it designs by implementing a responsibility-by-design approach to engineering. We conclude by presenting some initial recommendations on how to ensure that work carried out by the IETF may enable human rights.

Modeling and Prediction of Fan Noise

NASA Technical Reports Server (NTRS)

Envia, Ed

2008-01-01

Fan noise is a significant contributor to the total noise signature of a modern high bypass ratio aircraft engine and with the advent of ultra high bypass ratio engines like the geared turbofan, it is likely to remain so in the future. As such, accurate modeling and prediction of the basic characteristics of fan noise are necessary ingredients in designing quieter aircraft engines in order to ensure compliance with ever more stringent aviation noise regulations. In this paper, results from a comprehensive study aimed at establishing the utility of current tools for modeling and predicting fan noise will be summarized. It should be emphasized that these tools exemplify present state of the practice and embody what is currently used at NASA and Industry for predicting fan noise. The ability of these tools to model and predict fan noise is assessed against a set of benchmark fan noise databases obtained for a range of representative fan cycles and operating conditions. Detailed comparisons between the predicted and measured narrowband spectral and directivity characteristics of fan nose will be presented in the full paper. General conclusions regarding the utility of current tools and recommendations for future improvements will also be given.

'Power base' tactics for workplace change - an interview study with industrial engineers and ergonomists.

PubMed

Berlin, Cecilia; Neumann, W Patrick; Theberge, Nancy; Örtengren, Roland

2017-05-01

The work activities of industrial engineers (IEs) and ergonomists drive workplace changes. The purpose of this study is to compare the work practices of the two professions and examine (1) how IEs and ergonomists gain influence over workplace changes and (2) whether there are prevailing types of intentional interaction behaviours called Power bases (PB) present in the interaction tactics they employ. The study identified key behavioural strategies used by the interviewees to successfully influence workplace changes; these were then mapped to their corresponding PB. Results showed that IEs and ergonomists were successfully influencing workplace changes using several tactics across the spectrum of PB, with the exception of Reward and Coercion. The study concludes with a list of recommended workplace change agent tactics, and proposes that a PB 'analytical lens' can serve to increase the budding ergonomists' critical and analytical skills when considering possible workplace change tactics. Practitioner Summary: This interview study examines how workplace ergonomics change agents, represented by the two professions: industrial engineers and ergonomists, perceive and exercise their capacity to influence workplace change. Key behavioural tactics that interviewees have found successful are reported, alongside effects on short- and long-term relations with other workplace-influencing stakeholders.

Perspectives and Plans for Graduate Studies. 11. Engineering 1974. E. Industrial Engineering and Systems Design. Report No. 74-22.

ERIC Educational Resources Information Center

Ontario Council on Graduate Studies, Toronto. Advisory Committee on Academic Planning.

On the instruction of the Council of Ontario Universities, the Advisory Committee on Academic Planning in cooperation with the Committee of Ontario Deans of Engineering has conducted a planning assessment for doctoral work in industrial engineering and systems design. Recommendations for doctoral work in engineering studies are presented.…

Software Engineering Laboratory Series: Proceedings of the Twenty-First Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1996-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Software Engineering Laboratory Series: Proceedings of the Twenty-Second Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1997-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Epistemic Practices of Engineering for Education

ERIC Educational Resources Information Center

Cunningham, Christine M.; Kelly, Gregory J.

2017-01-01

Engineering offers new educational opportunities for students, yet also poses challenges about how to conceptualize the disciplinary core ideas, crosscutting concepts, and science and engineering practices of the disciplinary fields of engineering. In this paper, we draw from empirical studies of engineering in professional and school settings to…

Frugal Construction Standards. Final [Report].

ERIC Educational Resources Information Center

SMART Schools Clearinghouse, Tallahassee, FL.

This booklet provides best practice recommendations for building functional and frugal schools in Florida. Seventeen best practice construction recommendations are addressed, including recommendations for sitework, concrete, masonry, metals, wood and plastics, thermal and moisture protection, doors and windows, finishes, equipment, furnishings,…

Exposure assessment and risk management of engineered nanoparticles: Investigation in semiconductor wafer processing

NASA Astrophysics Data System (ADS)

Shepard, Michele N.

Engineered nanomaterials (ENMs) are currently used in hundreds of commercial products and industrial processes, with more applications being investigated. Nanomaterials have unique properties that differ from bulk materials. While these properties may enable technological advancements, the potential risks of ENMs to people and the environment are not yet fully understood. Certain low solubility nanoparticles are more toxic than their bulk material, such that existing occupational exposure limits may not be sufficiently protective for workers. Risk assessments are currently challenging due to gaps in data on the numerous emerging materials and applications as well as method uncertainties and limitations. Chemical mechanical planarization (CMP) processes with engineered nanoparticle abrasives are used for research and commercial manufacturing applications in the semiconductor and related industries. Despite growing use, no published studies addressed occupational exposures to nanoparticles associated with CMP or risk assessment and management practices for these scenarios. Additional studies are needed to evaluate potential sources of workplace exposure or emission, as well as to help test and refine assessment methods. This research was conducted to: identify the lifecycle stages and potential exposure sources for ENMs in CMP processes; characterize worker exposure; determine recommended engineering controls and compare risk assessment models. The study included workplace air and surface sampling and an evaluation of qualitative risk banding approaches. Exposure assessment results indicated the potential for worker contact with ENMs on workplace surfaces but did not identify nanoparticles readily dispersed in air during work tasks. Some increases in respirable particle concentrations were identified, but not consistently. Measured aerosol concentrations by number and mass were well below current reference values for poorly soluble low toxicity nanoparticles. From application and evaluation of qualitative risk assessment approaches, differences in control banding models and results were identified, although output generally agreed with conclusions from air sampling as to whether an upgrade in site engineering controls was recommended. This research helped to improve understanding of potential worker exposures to ENMs in CMP processes, as well as the methods for risk assessment and management of metal oxide nanoparticles in occupational environments.

78 FR 31851 - Harmonization of Airworthiness Standards-Gust and Maneuver Load Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-28

... airplanes equipped with wing-mounted engines; revise the engine torque loads criteria; add an engine failure... equipped with wing-mounted engines. Following an accident in which an airplane shed a large wing- mounted...-93-137, November 15, 1993). This recommendation was specifically aimed at gust loads on wing-mounted...

77 FR 31893 - Committee on Equal Opportunities in Science and Engineering (CEOSE); Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-30

... NATIONAL SCIENCE FOUNDATION Committee on Equal Opportunities in Science and Engineering (CEOSE... Opportunities in Science and Engineering (1173) Dates/Time: June 19, 2012, 1:00 p.m.-6:00 p.m.; June 20, 2012, 9... advice and recommendations concerning broadening participation in science and engineering. Agenda Tuesday...

75 FR 22754 - Federal Advisory Committee; Chief of Engineers Environmental Advisory Board; Charter Renewal

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-30

... recommendations to the Secretary of Defense, through the Secretary of the Army, Assistant Secretary of the Army (Civil Works), and the Chief of Engineers (U.S. Army Corps of Engineers) on matters relating to... DEPARTMENT OF DEFENSE Office of the Secretary Federal Advisory Committee; Chief of Engineers...

Laboratory Medicine Best Practice Guideline: Vitamins A, E and the Carotenoids in Blood

PubMed Central

Greaves, Ronda F; Woollard, Gerald A; Hoad, Kirsten E; Walmsley, Trevor A; Johnson, Lambro A; Briscoe, Scott; Koetsier, Sabrina; Harrower, Tamantha; Gill, Janice P

2014-01-01

Despite apparent method similarities between laboratories there appear to be confounding factors inhibiting uniform reporting and standardisation of vitamin assays. The Australasian Association of Clinical Biochemists (AACB) Vitamins Working Party, in conjunction with The Royal College of Pathologists of Australasia Quality Assurance Programs, has formulated a guideline to improve performance, reproducibility and accuracy of fat-soluble vitamin results. The aim of the guideline is to identify critical pre-analytical, analytical and post-analytical components of the analysis of vitamins A, E and carotenoids in blood to promote best practice and harmonisation. This best practice guideline has been developed with reference to the Centers for Disease Control and Prevention (CDC) “Laboratory Medicine Best Practices: Developing an Evidence-Based Review and Evaluation Process”. The CDC document cites an evaluation framework for generating best practice recommendations that are specific to laboratory medicine. These 50 recommendations proposed herein, were generated from a comprehensive literature search and the extensive combined experience of the AACB Vitamins Working Party members. They were formulated based on comparison between an impact assessment rating and strength of evidence and were classified as either: (1) strongly recommend, (2) recommend, (3) no recommendation for or against, or (4) recommend against. These best practice recommendations represent the consensus views, in association with peer reviewed evidence of the AACB Vitamins Working Party, towards best practice for the collection, analysis and interpretation of vitamins A, E and carotenoids in blood. PMID:25210208

Use of Simulators to Explore Specialty Recommendation for a Palpable Breast Mass

PubMed Central

Laufer, Shlomi; Ray, Rebecca D.; D'Angelo, Anne-Lise D.; Jones, Grace F.; Pugh, Carla M.

2015-01-01

Background The study aim was to evaluate recommendation patterns of different specialties for the work-up of a palpable breast mass using simulated scenarios and clinical breast examination (CBE) models. Methods Study participants were a convenience sample of physicians (n=318) attending annual surgical, family practice and obstetrics and gynecology (OB/GYN) conferences. Two different silicone-based breast models (superficial mass vs chest wall mass) were used to test CBE skills and recommendation patterns (imaging, tissue sampling, and follow-up). Results Participants were more likely to recommend mammography (p<.001) and core biopsy (p<.0001) and less likely to recommend needle aspiration (p<.043) and 1-month follow up (p<.001) for the chest wall mass compared to the superficial mass. Family practitioners were less likely to recommend ultrasound (p<.001) and OB/GYNs were less likely to recommend mammogram (p<.006) across models. Surgeons were more likely to recommend core biopsy and less likely to recommend needle aspiration across models (p<.001) Conclusions Recommendation patterns differed across the two models in line with existing practice guidelines. Additionally, differences in practice patterns between primary care and specialty providers may represent varying clinician capabilities, health care resources, and individual preferences. Our work shows that simulation may be used to track adherence to practice guidelines for breast masses. PMID:26198334

47 CFR 73.508 - Standards of good engineering practice.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Standards of good engineering practice. 73.508 Section 73.508 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES... engineering practice. (a) All noncommercial educational stations and LPFM stations operating with more than 10...

47 CFR 73.508 - Standards of good engineering practice.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 4 2014-10-01 2014-10-01 false Standards of good engineering practice. 73.508 Section 73.508 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES... engineering practice. (a) All noncommercial educational stations and LPFM stations operating with more than 10...

47 CFR 73.508 - Standards of good engineering practice.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 4 2012-10-01 2012-10-01 false Standards of good engineering practice. 73.508 Section 73.508 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES... engineering practice. (a) All noncommercial educational stations and LPFM stations operating with more than 10...

47 CFR 73.508 - Standards of good engineering practice.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 4 2013-10-01 2013-10-01 false Standards of good engineering practice. 73.508 Section 73.508 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES... engineering practice. (a) All noncommercial educational stations and LPFM stations operating with more than 10...

47 CFR 73.508 - Standards of good engineering practice.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false Standards of good engineering practice. 73.508 Section 73.508 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES... engineering practice. (a) All noncommercial educational stations and LPFM stations operating with more than 10...

Analysing the Integration of Engineering in Science Lessons with the Engineering-Infused Lesson Rubric

ERIC Educational Resources Information Center

Peterman, Karen; Daugherty, Jenny L.; Custer, Rodney L.; Ross, Julia M.

2017-01-01

Science teachers are being called on to incorporate engineering practices into their classrooms. This study explores whether the Engineering-Infused Lesson Rubric, a new rubric designed to target best practices in engineering education, could be used to evaluate the extent to which engineering is infused into online science lessons. Eighty lessons…

Problem Solving and Engineering Design, Introducing Bachelor Students to Engineering Practice at K. U. Leuven

ERIC Educational Resources Information Center

Heylen, Christel; Smet, Marc; Buelens, Hermans; Sloten, Jos Vander

2007-01-01

A present-day engineer has a large scientific knowledge; he is a team-player, eloquent communicator and life-long learner. At the Katholieke Universiteit Leuven, the course "Problem Solving and Engineering Design" introduces engineering students from the first semester onwards into real engineering practice and teamwork. Working in small…

Attracting orthodontic patients via the Internet: A 20-year evolution.

PubMed

Jorgensen, Greg

2015-12-01

A generation ago, attracting new patients to an orthodontic practice was often done simply by cultivating a few good referral sources. General dentists, including some who might have provided orthodontic treatment out of necessity, were generally glad to have a trusted specialist they could recommend to their patients. Although general dentists remain an important source of new patients today, many consumers now turn to the Internet for help selecting their own specialists. As orthodontists face more competition from various sources, successful clinicians will make it easy for search engines--and patients--to find their Web sites on the Internet. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

[Problem areas and examples of best practice in intersectoral medication treatment--a literature review].

PubMed

Mehrmann, Lena; Ollenschläger, Günter

2014-01-01

Transitions between the outpatient and inpatient sector are a critical phase in medication treatment. This article provides an overview of published problem areas and examples of best practice in the intersectoral medication treatment. Data with regard to related problem areas and examples of best practice was collected in August 2011 by a systematic literature research. The relevant literature was identified using the following databases and search engines: MEDLINE, The Cochrane Library, EMBASE, Google, and Google Scholar. Additionally, a hand search was done on the websites of SpringerLink and Thieme Connect. The initial search yielded a total of 4,409 records which were further selected in two screening steps and analysed according to their relevance. Of the remaining 63 records, 3 exclusively described problem areas, 11 of them examples of best practice, and 49 provided information on both problem areas and examples of best practice with regard to intersectoral medication treatment. Among other things, problem areas include varying legal regulations in inpatient and outpatient medication treatment, drug therapy interruptions after hospital discharge, or deficits in communication and continuity of care. Examples of best practice are projects, programmes, initiatives, recommendations, and points to consider with respect to medication reconciliation, pharmaceutical support, or transitions of care. Problem areas as well as examples of best practice are mainly focused on the transition from inpatient to outpatient care. Copyright © 2013. Published by Elsevier GmbH.

Report on the Second Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE2)

NASA Astrophysics Data System (ADS)

Katz, Daniel S.; Choi, Sou-Cheng T.; Wilkins-Diehr, Nancy; Chue Hong, Neil; Venters, Colin C.; Howison, James; Seinstra, Frank; Jones, Matthew; Cranston, Karen; Clune, Thomas L.; de Val-Borro, Miguel; Littauer, Richard

2016-02-01

This technical report records and discusses the Second Workshop on Sustainable Software for Science: Practice and Experiences (WSSSPE2). The report includes a description of the alternative, experimental submission and review process, two workshop keynote presentations, a series of lightning talks, a discussion on sustainability, and five discussions from the topic areas of exploring sustainability; software development experiences; credit & incentives; reproducibility & reuse & sharing; and code testing & code review. For each topic, the report includes a list of tangible actions that were proposed and that would lead to potential change. The workshop recognized that reliance on scientific software is pervasive in all areas of world-leading research today. The workshop participants then proceeded to explore different perspectives on the concept of sustainability. Key enablers and barriers of sustainable scientific software were identified from their experiences. In addition, recommendations with new requirements such as software credit files and software prize frameworks were outlined for improving practices in sustainable software engineering. There was also broad consensus that formal training in software development or engineering was rare among the practitioners. Significant strides need to be made in building a sense of community via training in software and technical practices, on increasing their size and scope, and on better integrating them directly into graduate education programs. Finally, journals can define and publish policies to improve reproducibility, whereas reviewers can insist that authors provide sufficient information and access to data and software to allow them reproduce the results in the paper. Hence a list of criteria is compiled for journals to provide to reviewers so as to make it easier to review software submitted for publication as a "Software Paper."

76 FR 37158 - Agency Information Collection Activities: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-24

... Presidential Awards for Excellence in Science, Mathematics and Engineering Mentoring (PAESMEM) program. In 2003... representative scientific or engineering organization.'' On the basis of these recommendations, the Committee was... individual's work on the current state of physical, biological, mathematical, engineering or social and...

Developing a professional identity: student nurses in the workplace.

PubMed

Grealish, Laurie; Trevitt, Corinne

2005-01-01

This analysis of the academic and student discourse about learning in the practicum in one Australian pre-registration Bachelor of Nursing course is part of a larger study examining the professional identity of undergraduate students in three professional groups: nursing, teaching and engineering. The focus group discussion of six student nurses reveals that the theories learned in the classroom are only partially useful preparation for the relationships required to work as a nurse in a people-laden workplace; students struggle to create meaning about practices that are not consistent with classroom theory; and students require support as they develop an identity of a nurse through the embodiment of practice work. The findings from this group support the view that the traditional approach to learning, as expressed in the documentation for the final practicum experience, where knowledge is certain, context-free, and disciplinary or subject focused, is insufficient to assist student readiness for the world of work. Recommendations emerging from this analysis are related to the university and provides some evidence for others teaching in nursing programs to reconsider their practices.

Dietary recommendations for infants and toddlers among pediatric dentists in North Carolina.

PubMed

Sim, Chien J; Iida, Hiroko; Vann, William F; Quinonez, Rocio B; Steiner, Michael J

2014-01-01

The purposes of this study were to: describe practice patterns, knowledge, and attitudes of pediatric dentists in North Carolina (N.C.) in delivering dietary recommendations to the parents/caregivers of infants and toddlers; and identify barriers that limit the implementation of related recommendations. Our survey instrument included 30 questions covering eight domains of barriers to guideline adherence. Surveys were mailed to 150 practicing pediatric dentists in N.C. Descriptive and bivariate analyses were performed. Exploratory factor analysis was used to identify subscales and inform the multivariable model. The response rate was 57 percent (86/150), 80 percent of whom reported providing infant and toddler feeding recommendations routinely. Knowledge of and agreement with the recommendation regarding breast-feeding duration was lower than that for bottle-feeding recommendations. Stepwise logistic regression analysis indicated that survey respondents were less likely to provide dietary recommendations regularly to the parents/caregivers of infants and toddlers when they have practice constraints and the respondents disagree with American Academy of Pediatrics (AAP) and American Academy of Pediatric Dentistry (AAPD) recommendations on bottle and juice consumption. Most respondents routinely provide dietary recommendations to the parents/caregivers of infants and toddlers. Disagreement with AAP and AAPD recommendations on bottle, and juice consumption as well as practice constraints impedes practitioners from providing dietary recommendations regularly to the parents/caregivers of infants and toddlers.

Engineers' Professional Learning: A Practice-Theory Perspective

ERIC Educational Resources Information Center

Reich, Ann; Rooney, Donna; Gardner, Anne; Willey, Keith; Boud, David; Fitzgerald, Terry

2015-01-01

With the increasing challenges facing professional engineers working in more complex, global and interdisciplinary contexts, different approaches to understanding how engineers practice and learn are necessary. This paper draws on recent research in the social sciences from the field of workplace learning, to suggest that a practice-theory…

Summary of OEM Idling Recommendations from Vehicle Owner's Manuals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keel-Blackmon, Kristy; Curran, Scott; Lapsa, Melissa Voss

The project upon which this report is based was conceived in 2012 during discussions between the East Tennessee Clean Fuels Coalition (ETCleanFuels) and Oak Ridge National Laboratory (ORNL) who both noted that a detailed summary of idling recommendations for a wide variety of engines and vehicles were not available in the literature. The two organizations agreed that ETCleanFuels would develop a first-of-its-kind collection of idling recommendations from the owner’s manuals of modern production vehicles. Vehicle engine idling, a subject that has long been debated, is largely shrouded in misinformation. The justifications for idling seem to be many: driver comfort, waitingmore » in lines, and talking on cell phones to name a few. Assuredly, a great number of people idle because of the myths and misinformation surrounding this issue. This report addresses these myths by turning to statements taken directly from the automobile and engine manufacturers themselves.« less

Applying an innovative educational program for the education of today's engineers

NASA Astrophysics Data System (ADS)

Kans, M.

2012-05-01

Engineers require a broad spectrum of knowledge and skills: basic skills in mathematics and physics, skills and competencies within the major subject area as well as more general knowledge about business and enterprise contexts, society regulations and understanding of the future professions' characteristics. In addition, social, intercultural, analytical and managing competencies are desired. The CDIO educational program was initiated as a means to come closer to practice and to assure the training of engineering skills that are required of today's engineers. CDIO is short for Conceive-Design-Implement-Operate and describes the full life cycle understanding of a system or asset that engineering students should reach during education. The CDIO initiative is formulated in a program consisting of two important documents: the CDIO standards and the CDIO syllabus. The standards describe a holistic approach on education, from knowledge and skills to be trained, how to train and assess them, to how to develop the teaching staff and the work places for enabling the goals. The specific knowledge and skills to be achieved are accounted for in the syllabus. In this paper we share our more than 15 years of experiences in problem and project based learning from the perspective of the CDIO standards. For each standard, examples of how to set up the education and overcome challenges connected to the standard are given. The paper concludes with recommendations to others wishing to work toward problem and real-life based education without compromising the requirements of a scientific approach.

Summary report for the Engineering Script Language (ESL)

NASA Technical Reports Server (NTRS)

1990-01-01

The following subject areas are covered: ESL methodology concept; ESL specification; user interface description; engineering scripting language command statements specification; and recommendations for further research and development.

Using Principles of Evidence-Based Practice to Improve Prescriptive Recommendations

ERIC Educational Resources Information Center

Schraw, Gregory; Patall, Erika A.

2013-01-01

We draw on the evidence-based practice (EBP) literature to consider the relationship between empirical results reported in primary research journals and prescriptive recommendations for practice based on those results. We argue that the relationship between individual empirical findings and practice should be mediated by two additional steps in…

How an Integrative STEM Curriculum Can Benefit Students in Engineering Design Practices

ERIC Educational Resources Information Center

Fan, Szu-Chun; Yu, Kuang-Chao

2017-01-01

STEM-oriented engineering design practice has become recognized increasingly by technology education professionals in Taiwan. This study sought to examine the effectiveness of the application of an integrative STEM approach within engineering design practices in high school technology education in Taiwan. A quasi-experimental study was conducted…

Core Ideas of Engineering and Technology

ERIC Educational Resources Information Center

Sneider, Cary

2012-01-01

Last month, Rodger Bybee's article, "Scientific and Engineering Practices in K-12 Classrooms," provided an overview of Chapter 3 in "A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas" (NRC 2011). Chapter 3 describes the practices of science and engineering that students are expected to develop during 13 years…

Adapting heart failure guidelines for nursing care in home health settings: challenges and solutions.

PubMed

Radhakrishnan, Kavita; Topaz, Maxim; Masterson Creber, Ruth

2014-07-01

Nurses provide most of home health services for patients with heart failure, and yet there are no evidence-based practice guidelines developed for home health nurses. The purpose of this article was to review the challenges and solutions for adapting generally available HF clinical practice guidelines to home health nursing. Appropriate HF guidelines were identified and home health nursing-relevant guidelines were extracted by the research team. In addition, a team of nursing academic and practice experts evaluated the extracted guidelines and reached consensus through Delphi rounds. We identified 172 recommendations relevant to home health nursing from the American Heart Association and Heart Failure Society of America guidelines. The recommendations were divided into 5 groups (generic, minority populations, normal ejection fraction, reduced ejection fraction, and comorbidities) and further subgroups. Experts agreed that 87% of the recommendations selected by the research team were relevant to home health nursing and rejected 6% of the selected recommendations. Experts' opinions were split on 7% of guideline recommendations. Experts mostly disagreed on recommendations related to HF medication and laboratory prescription as well as HF patient assessment. These disagreements were due to lack of patient information available to home health nurses as well as unclear understanding of scope of practice regulations for home health nursing. After 2 Delphi rounds over 8 months, we achieved 100% agreement on the recommendations. The finalized guideline included 153 recommendations. Guideline adaptation projects should include a broad scope of nursing practice recommendations from which home health agencies can customize relevant recommendations in accordance with available information and state and agency regulations.

Evidence-based advances in transfusion practice in neonatal intensive care units.

PubMed

Christensen, Robert D; Carroll, Patrick D; Josephson, Cassandra D

2014-01-01

Transfusions to neonates convey both benefits and risks, and evidence is needed to guide wise use. Such evidence is accumulating, but more information is needed to generate sound evidence-based practices. We sought to analyze published information on nine aspects of transfusion practice in neonatal intensive care units. We assigned 'categories of evidence' and 'recommendations' using the format of the United States Preventive Services Task Force of the Agency for Healthcare Research and Quality. The nine practices studied were: (1) delayed clamping or milking of the umbilical cord at preterm delivery - recommended, high/substantial A; (2) drawing the initial blood tests from cord/placental blood from very low birth weight (VLBW, <1,500 g) infants at delivery - recommended, moderate/moderate B; (3) limiting phlebotomy losses of VLBW infants - recommended, moderate/substantial B; (4) selected use of erythropoiesis-stimulating agents to prevent transfusions - recommended, moderate/moderate-moderate/small B, C; (5) using platelet mass, rather than platelet count, in platelet transfusion decisions - recommended, moderate/small C; (6) permitting the platelet count to fall to <20,000/µl in 'stable' neonates before transfusing platelets - recommended, low/small I; (8) permitting the platelet count to fall to <50,000/µl in 'unstable' neonates before transfusing platelets - recommended, moderate/small C, and (9) not performing routine coagulation test screening on every VLBW infant - recommended, moderate/small C. We view these recommendations as dynamic, to be revised as additional evidence becomes available. We predict this list will expand as new studies provide more information to guide best transfusion practices. © 2014 S. Karger AG, Basel.

Barriers to implementing the "2008 Mexican Clinical Practice Guideline recommendations for the management of hip and knee osteoarthritis" in primary healthcare practice.

PubMed

Loyola-Sanchez, Adalberto; Richardson, Julie; Pelaez-Ballestas, Ingris; Sánchez, José Guadalupe; González, Martha Alicia; Sánchez-Cruz, Juan; Jiménez-Baez, María Valeria; Nolasco-Alonso, Nancy; Alvarado, Idolina; Rodríguez-Amado, Jacqueline; Alvarez-Nemegyei, José; Wilson, Mike G

2014-01-01

To evaluate the implementability of the "2008 Mexican Clinical Practice Guideline for the management of hip and knee osteoarthritis at the primary level of care" within primary healthcare of three Mexican regions using the Guideline Implementability Appraisal methodology version 2 (GLIA.v2). Six family physicians, representing the South, North, and Central Mexico, and one Mexican physiatrist evaluated the 45 recommendations stated by the Mexican guideline. The GLIA.v2 methodology includes the execution of qualitative and semi-quantitative techniques. Reviewers' agreement was between moderate to near complete in most cases. Sixty-nine percent of the recommendations were considered difficult to implement within clinical practice. Eight recommendations did not have an appropriate format. Only 6 recommendations were judged as able to be consistently applied to clinical practice. Barriers related to the context of one or more institutions/regions were identified in 25 recommendations. These barriers are related to health providers/patients' beliefs, processes of care within each institution, and availability of some treatments recommended by the guideline. The guideline presented problems of conciseness and clarity that negatively affect its application within the Mexican primary healthcare context. We identified individual, organizational and system characteristics, which are common to the 3 institutions/regions studied and constitute barriers for implementing the guideline to clinical practice. It is recommended that the 2008-Mexican-CPG-OA be thoroughly revised and restructured to improve the clarity of the actions implied by each recommendation. We propose some strategies to accomplish this and to overcome some of the identified regional/institutional barriers. Copyright © 2013 Elsevier España, S.L.U. All rights reserved.

Quality appraisal of clinical practice guidelines on the use of physiotherapy in rheumatoid arthritis: a systematic review.

PubMed

Hurkmans, Emalie J; Jones, Anamaria; Li, Linda C; Vliet Vlieland, Theodora P M

2011-10-01

To assess the quality of guidelines published in peer-reviewed literature concerning the role of physiotherapy in the management of patients with RA. A systematic literature search for clinical practice guidelines that included physiotherapy interventions was performed in four electronic databases. We assessed the quality of the selected guidelines using the appraisal of guidelines for research and evaluation (AGREE) instrument. In addition, the recommendations of guidelines with the highest quality scores were summarized. Eight clinical practice guidelines fulfilled the inclusion criteria. Scope/purpose was the most often adequately addressed AGREE domain (in seven of the eight guidelines) and applicability the least (in two of the eight guidelines). Based on the AGREE domain scores, six guidelines could be recommended or strongly recommended for clinical use. Five out of these six (strongly) recommended guidelines included a recommendation on exercise therapy and/or patient education, with these interventions being recommended in every case. Transcutaneous electrical nerve stimulation and thermotherapy were recommended in four of these six guidelines. US, thermotherapy, low-level laser therapy, massage, passive mobilization and balneotherapy were addressed in one or two of these six guidelines. Six of eight clinical practice guidelines addressing physiotherapy interventions were recommended or strongly recommended according to the AGREE instrument. In general, guideline recommendations on physiotherapy intervention, from both the recommended guidelines as well as from the not recommended guidelines, lacked detail concerning mode of delivery, intensity, frequency and duration.

Does Curriculum Practical Training Affect Engineers' Workplace Outcomes? Evidence from an Engineer Survey in China

ERIC Educational Resources Information Center

Li, Jing; Zhang, Yu; Tsang, Mun; Li, Manli

2015-01-01

With the increasing attention to STEM (Science, Technology, Engineering, and Math), hands-on Curriculum Practical Training (CPT) has been expanding rapidly worldwide as a requirement of the undergraduate engineering education. In China, a typical CPT for undergraduate engineering students requires several weeks of hands-on training in the…

Metamodels for Computer-Based Engineering Design: Survey and Recommendations

NASA Technical Reports Server (NTRS)

Simpson, Timothy W.; Peplinski, Jesse; Koch, Patrick N.; Allen, Janet K.

1997-01-01

The use of statistical techniques to build approximations of expensive computer analysis codes pervades much of todays engineering design. These statistical approximations, or metamodels, are used to replace the actual expensive computer analyses, facilitating multidisciplinary, multiobjective optimization and concept exploration. In this paper we review several of these techniques including design of experiments, response surface methodology, Taguchi methods, neural networks, inductive learning, and kriging. We survey their existing application in engineering design and then address the dangers of applying traditional statistical techniques to approximate deterministic computer analysis codes. We conclude with recommendations for the appropriate use of statistical approximation techniques in given situations and how common pitfalls can be avoided.

Practical Strategy on the Subject of “Science and Ethics” for Overcoming Hybrid Engineering Ethics Education

NASA Astrophysics Data System (ADS)

Yasui, Yoshiaki

The issue of economic globalization and JABEE (Japan Accreditation Board for Engineering Education) mean that education on engineering ethics has now become increasingly important for science-engineering students who will become the next generation of engineers. This is clearly indicated when engineers are made professionally responsible for various unfortunate accidents that happen during daily life in society. Learning hybrid engineering ethics is an essential part of the education of the humanities and sciences. This paper treats the contents for the subject of “Science and Ethics” drawing on several years of practice and the fruits of studying science and engineering ethics at the faculty of science-engineering in university. This paper can be considered to be a practical strategy to the formation of morality.

2016 AHA/ACC Guideline on the Management of Patients With Lower Extremity Peripheral Artery Disease

PubMed Central

Gerhard-Herman, Marie D.; Gornik, Heather L.; Barrett, Coletta; Barshes, Neal R.; Corriere, Matthew A.; Drachman, Douglas E.; Fleisher, Lee A.; Flowkes, Francis Gerry R.; Hamburg, Naomi M.; Kinlay, Scott; Lookstein, Robert; Misra, Sanjay; Mureebe, Leila; Olin, Jeffrey W.; Patel, Rajan A.G.; Regensteiner, Judith G.; Schanzer, Andres; Shishehbor, Mehdi H.; Stewart, Kerry J.; Treat-Jacobson, Diane; Walsh, M. Eileen; Halperin, Jonathan L.

2017-01-01

Preamble Since 1980, the American College of Cardiology (ACC) and American Heart Association (AHA) have translated scientific evidence into clinical practice guidelines with recommendations to improve cardiovascular health. These guidelines, based on systematic methods to evaluate and classify evidence, provide a cornerstone of quality cardiovascular care. In response to reports from the Institute of Medicine1,2 and a mandate to evaluate new knowledge and maintain relevance at the point of care, the ACC/AHA Task Force on Clinical Practice Guidelines (Task Force) modified its methodology.3–5 The relationships among guidelines, data standards, appropriate use criteria, and performance measures are addressed elsewhere.5 Intended Use Practice guidelines provide recommendations applicable to patients with or at risk of developing cardiovascular disease. The focus is on medical practice in the United States, but guidelines developed in collaboration with other organizations may have a broader target. Although guidelines may be used to inform regulatory or payer decisions, the intent is to improve quality of care and align with patients' interests. Guidelines are intended to define practices meeting the needs of patients in most, but not all, circumstances, and should not replace clinical judgment. Guidelines are reviewed annually by the Task Force and are official policy of the ACC and AHA. Each guideline is considered current until it is updated, revised, or superseded by published addenda, statements of clarification, focused updates, or revised full-text guidelines. To ensure that guidelines remain current, new data are reviewed biannually to determine whether recommendations should be modified. In general, full revisions are posted in 5-year cycles.3–6 Modernization Processes have evolved to support the evolution of guidelines as “living documents” that can be dynamically updated. This process delineates a recommendation to address a specific clinical question, followed by concise text (ideally <250 words) and hyperlinked to supportive evidence. This approach accommodates time constraints on busy clinicians and facilitates easier access to recommendations via electronic search engines and other evolving technology. Evidence Review Writing committee members review the literature; weigh the quality of evidence for or against particular tests, treatments, or procedures; and estimate expected health outcomes. In developing recommendations, the writing committee uses evidence-based methodologies that are based on all available data.3–7 Literature searches focus on randomized controlled trials (RCTs) but also include registries, nonrandomized comparative and descriptive studies, case series, cohort studies, systematic reviews, and expert opinion. Only selected references are cited. The Task Force recognizes the need for objective, independent Evidence Review Committees (ERCs) that include methodologists, epidemiologists, clinicians, and biostatisticians who systematically survey, abstract, and assess the evidence to address systematic review questions posed in the PICOTS format (P=population, I=intervention, C=comparator, O=outcome, T=timing, S=setting).2,4–6 Practical considerations, including time and resource constraints, limit the ERCs to evidence that is relevant to key clinical questions and lends itself to systematic review and analysis that could affect the strength of corresponding recommendations. Guideline-Directed Management and Treatment The term “guideline-directed management and therapy” (GDMT) refers to care defined mainly by ACC/AHA Class I recommendations. For these and all recommended drug treatment regimens, the reader should confirm dosage with product insert material and carefully evaluate for contraindications and interactions. Recommendations are limited to treatments, drugs, and devices approved for clinical use in the United States. Class of Recommendation and Level of Evidence The Class of Recommendation (COR; ie, the strength of the recommendation) encompasses the anticipated magnitude and certainty of benefit in proportion to risk. The Level of Evidence (LOE) rates evidence supporting the effect of the intervention on the basis of the type, quality, quantity, and consistency of data from clinical trials and other reports (Table 1).3–5 Unless otherwise stated, recommendations are sequenced by COR and then by LOE. Where comparative data exist, preferred strategies take precedence. When >1 drug, strategy, or therapy exists within the same COR and LOE and no comparative data are available, options are listed alphabetically. Relationships With Industry and Other Entities The ACC and AHA sponsor the guidelines without commercial support, and members volunteer their time. The Task Force zealously avoids actual, potential, or perceived conflicts of interest that might arise through relationships with industry or other entities (RWI). All writing committee members and reviewers are required to disclose current industry relationships or personal interests, from 12 months before initiation of the writing effort. Management of RWI involves selecting a balanced writing committee and assuring that the chair and a majority of committee members have no relevant RWI (Appendix 1). Members are restricted with regard to writing or voting on sections to which their RWI apply. For transparency, members' comprehensive disclosure information is available online. Comprehensive disclosure information for the Task Force is also available online. The Task Force strives to avoid bias by selecting experts from a broad array of backgrounds representing different geographic regions, sexes, ethnicities, intellectual perspectives/biases, and scopes of clinical practice, and by inviting organizations and professional societies with related interests and expertise to participate as partners or collaborators. Individualizing Care in Patients With Associated Conditions and Comorbidities Managing patients with multiple conditions can be complex, especially when recommendations applicable to coexisting illnesses are discordant or interacting.8 The guidelines are intended to define practices meeting the needs of patients in most, but not all, circumstances. The recommendations should not replace clinical judgment. Clinical Implementation Management in accordance with guideline recommendations is effective only when followed. Adherence to recommendations can be enhanced by shared decision making between clinicians and patients, with patient engagement in selecting interventions on the basis of individual values, preferences, and associated conditions and comorbidities. Consequently, circumstances may arise in which deviations from these guidelines are appropriate. PMID:27840333

Perspectives and Plans for Graduate Studies. 11. Engineering 1974. D. Mechanical Engineering. Report No. 74-21.

ERIC Educational Resources Information Center

Ontario Council on Graduate Studies, Toronto. Advisory Committee on Academic Planning.

On the instruction of the Council of Ontario Universities, the Advisory Committee on Academic Planning in cooperation with the Committee of Ontario Deans of Engineering has conducted a planning assessment for doctoral work in mechanical engineering. This report presents as overview of the recommendations for each of the assessments conducted in…

Engineering's Grand Challenges: Priorities and Integration Recommendations for Technology Education Curriculum Development

ERIC Educational Resources Information Center

Buelin, Jennifer; Clark, Aaron C.; Ernst, Jeremy V.

2016-01-01

In this study, the 14 Grand Challenges for Engineering in the 21st Century identified by the National Academy of Engineering were examined by a panel of experts in an effort to identify prospective curricular integration opportunities in the field of technology and engineering education. The study utilized a three-round modified Delphi methodology…

Some developing concepts of engineering education

NASA Technical Reports Server (NTRS)

Perkins, C. D.

1975-01-01

An analysis of the circumstances which have created a shortage of aeronautical engineering undergraduate students in the universities is presented. Suggestions for motivating students to enter aeronautical engineering are examined. The support of the aeronautical industry for graduate education funding is recommended. Examples of actions taken by governmental agencies to promote increased interest in aeronautical engineering are included.

Engineering and Language Discourse Collaboration: Practice Realities

ERIC Educational Resources Information Center

Harran, Marcelle

2011-01-01

This article describes a situated engineering project at a South African HE institution which is underpinned by collaboration between Applied Language Studies (DALS) and Mechanical Engineering. The collaboration requires language practitioners and engineering experts to negotiate and collaborate on academic literacies practices, discourse…

Activist engineering: changing engineering practice by deploying praxis.

PubMed

Karwat, Darshan M A; Eagle, Walter E; Wooldridge, Margaret S; Princen, Thomas E

2015-02-01

In this paper, we reflect on current notions of engineering practice by examining some of the motives for engineered solutions to the problem of climate change. We draw on fields such as science and technology studies, the philosophy of technology, and environmental ethics to highlight how dominant notions of apoliticism and ahistoricity are ingrained in contemporary engineering practice. We argue that a solely technological response to climate change does not question the social, political, and cultural tenet of infinite material growth, one of the root causes of climate change. In response to the contemporary engineering practice, we define an activist engineer as someone who not only can provide specific engineered solutions, but who also steps back from their work and tackles the question, What is the real problem and does this problem "require" an engineering intervention? Solving complex problems like climate change requires radical cultural change, and a significant obstacle is educating engineers about how to conceive of and create "authentic alternatives," that is, solutions that differ from the paradigm of "technologically improving" our way out of problems. As a means to realize radically new solutions, we investigate how engineers might (re)deploy the concept of praxis, which raises awareness in engineers of the inherent politics of technological design. Praxis empowers engineers with a more comprehensive understanding of problems, and thus transforms technologies, when appropriate, into more socially just and ecologically sensitive interventions. Most importantly, praxis also raises a radical alternative rarely considered-not "engineering a solution." Activist engineering offers a contrasting method to contemporary engineering practice and leads toward social justice and ecological protection through problem solving by asking not, How will we technologize our way out of the problems we face? but instead, What really needs to be done?

Poster - 28: Shielding of X-ray Rooms in Ontario in the Absence of Best Practice

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frimeth, Jeff; Richer, Jeff; Nesbitt, James

This poster will be strictly based on the Healing Arts Radiation Protection (HARP) Act, Regulation 543 under this Act (X-ray Safety Code), and personal communication the presenting author has had. In Ontario, the process of approval of an X-ray machine installation by the Director of the X-ray Inspection Service (XRIS) follows a certain protocol. Initially, the applicant submits a series of forms, including recommended shielding amounts, in order to satisfy the law. This documentation is then transferred to a third-party vendor (i.e. a professional engineer – P.Eng.) outsourced by the Ministry of Health and Long-term Care (MOHLTC). The P.Eng. thenmore » evaluates the submitted documentation for appropriate fulfillment of the HARP Act and Reg. 543 requirements. If the P.Eng.’s evaluation of the documentation is to their satisfaction, the XRIS is then notified. Finally, the Director will then issue a letter of approval to install the equipment at the facility. The methodology required to be used by the P.Eng. in order to determine the required amounts of protective barriers, and recommended to be used by the applicant, is contained within Safety Code 20A. However, Safety Code 35 has replaced the obsolete Safety Code 20A document and employs best practices in shielding design. This talk will focus further on specific intentions and limitations of Safety Code 20A. Furthermore, this talk will discuss the definition of the “practice of professional engineering” in Ontario. COMP members who are involved in shielding design are strongly encouraged to attend.« less

Implementing AORN recommended practices for medication safety.

PubMed

Hicks, Rodney W; Wanzer, Linda J; Denholm, Bonnie

2012-12-01

Medication errors in the perioperative setting can result in patient morbidity and mortality. The AORN "Recommended practices for medication safety" provide guidance to perioperative nurses in developing, implementing, and evaluating safe medication use practices. These practices include recognizing risk points in the medication use process, collaborating with pharmacy staff members, conducting preoperative assessments and postoperative evaluations (eg, medication reconciliation), and handling hazardous medications and pharmaceutical waste. Strategies for successful implementation of the recommended practices include promoting a basic understanding of the nurse's role in the medication use process and developing a medication management plan as well as policies and procedures that support medication safety and activities to measure compliance with safe practices. Published by Elsevier Inc.

Component Test Facility (Comtest) Phase 1 Engineering For 760°C (1400°F) Advanced Ultrasupercritical (A-USC) Steam Generator Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weitzel, Paul

2016-05-13

The Babcock & Wilcox Company (B&W) performed a Pre-Front End Engineering Design (Pre-FEED) of an A-USC steam superheater for a proposed component test program achieving 760°C (1400°F) steam temperature. This would lead to follow-on work in a Phase 2 and Phase 3 that would involve detail design, manufacturing, construction and operation of the ComTest. Phase 1 results have provided the engineering data necessary for proceeding to the next phase of ComTest. The steam generator superheater would subsequently supply the steam to an A-USC prototype intermediate pressure steam turbine. The ComTest program is important in that it will place functioning A-USCmore » components in operation and in coordinated boiler and turbine service. It is also important to introduce the power plant operation and maintenance personnel to the level of skills required and provide the first background experience with hands-on training. The project will provide a means to exercise the complete supply chain events required in order to practice and perfect the process for A-USC power plant design, supply, manufacture, construction, commissioning, operation and maintenance. Representative participants will then be able to transfer knowledge and recommendations to the industry. ComTest is conceived in the manner of using a separate standalone plant facility that will not jeopardize the host facility or suffer from conflicting requirements in the host plant’s mission that could sacrifice the nickel alloy components and not achieve the testing goals. ComTest will utilize smaller quantities of the expensive materials and reduce the risk in the first operational practice for A-USC technology in the United States. Components at suitable scale in ComTest provide more assurance before putting them into practice in the full size A-USC demonstration plant.« less

Automobile Engine Control Parameters Study : Volume 1. Summary and Status of Domestic Engine Control Practice

DOT National Transportation Integrated Search

1977-02-01

This report contains the results of a study to evaluate automobile engine control parameters and their effects on vehicle fuel economy and emissions. Volume I presents detailed technical information on the engine control practices used by selected do...

Multimedia Category Preferences of Working Engineers

ERIC Educational Resources Information Center

Baukal, Charles E., Jr.; Ausburn, Lynna J.

2016-01-01

Many have argued for the importance of continuing engineering education (CEE), but relatively few recommendations were found in the literature for how to use multimedia technologies to deliver it most effectively. The study reported here addressed this gap by investigating the multimedia category preferences of working engineers. Four categories…

76 FR 21073 - Notice of Intent To Seek Approval To Continue an Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-14

... Excellence in Science, Mathematics and Engineering Mentoring (PAESMEM) program. In 2003, to comply with E... would ``receive recommendations made by any other nationally representative scientific or engineering..., biological, mathematical, engineering or social and behavioral sciences. 2. Achievements of an unusually...

A Strategy for Sourcing Continuing Engineering Education

ERIC Educational Resources Information Center

Baukal, Charles E., Jr.

2012-01-01

Many are calling for increased continuing education for engineers, but few details are provided as to how to source that education. This paper recommends a strategy for sourcing continuing engineering education (CEE). Providers of CEE are categorized here as internal (the organization itself), external (universities, professional/trade…

P-12 Engineering Education Research and Practice

ERIC Educational Resources Information Center

Moore, Tamara; Richards, Larry G.

2012-01-01

This special issue of "Advances in Engineering Education" explores recent developments in P-12 Engineering Education. It includes papers devoted to research and practice, and reports some of the most exciting work in the field today. In our Call of Papers, we solicited two types of papers: Research papers and Practice papers. The former…

Culturally Responsive Practice for Teacher Educators: Eight Recommendations

ERIC Educational Resources Information Center

Baumgartner, Dana; Bay, Mary; Lopez-Reyna, Norma A.; Snowden, Peggy A.; Maiorano, Michael J.

2015-01-01

In this article, we argue for the importance of all teacher educators engaging in a culturally responsive practice in their university classrooms. Whereas the literature is replete with recommendations regarding the use of a culturally responsive practice in P-12 settings, it is virtually silent on the use of such a practice in higher education…

Engineering Employment Characteristics. Engineering Education and Practice in the United States.

ERIC Educational Resources Information Center

National Academy of Sciences - National Research Council, Washington, DC. Commission on Engineering and Technical Systems.

This panel report was prepared as part of the study of engineering education and practice conducted under the guidance of the National Research Council's Committee on the Education and Utilization of the Engineer. The panel's goal was to provide a data base that describes the engineering work force, its main activities, capabilities, and principal…

Building a Consensus on Community Health Workers’ Scope of Practice: Lessons From New York

PubMed Central

Matos, Sergio; Hicks, April L.; Campbell, Ayanna; Moore, Addison; Diaz, Diurka

2012-01-01

Objectives. We evaluated efforts in New York to build a consensus between community health workers (CHWs) and employers on CHWs’ scope of practice, training standards, and certification procedures. Methods. We conducted multiple-choice surveys in 2008 and 2010 with 226 CHWs and 44 employers. We compared CHWs’ and employers’ recommendations regarding 28 scope of practice elements. The participatory ranking method was used to identify consensus scope of practice recommendations. Results. There was consensus on 5 scope of practice elements: outreach and community organizing, case management and care coordination, home visits, health education and coaching, and system navigation. For each element, 3 to 4 essential skills were identified, giving a total of 27 skills. These included all skills recommended in national CHW studies, along with 3 unique to New York: computer skills, participatory research methods, and time management. Conclusions. CHWs and employers in New York were in consensus on CHWs’ scope of practice on virtually all of the detailed core competency skills. The CHW scope of practice recommendations of these groups can help other states refine their scope of practice elements. PMID:22897548

Engineers' professional learning: a practice-theory perspective

NASA Astrophysics Data System (ADS)

Reich, Ann; Rooney, Donna; Gardner, Anne; Willey, Keith; Boud, David; Fitzgerald, Terry

2015-07-01

With the increasing challenges facing professional engineers working in more complex, global and interdisciplinary contexts, different approaches to understanding how engineers practice and learn are necessary. This paper draws on recent research in the social sciences from the field of workplace learning, to suggest that a practice-theory perspective on engineers' professional learning is fruitful. It shifts the focus from the attributes of the individual learner (knowledge, skills and attitudes) to the attributes of the practice (interactions, materiality, opportunities and challenges). Learning is thus more than the technical acquisition and transfer of knowledge, but a complex bundle of activities, that is, social, material, embodied and emerging. The paper is illustrated with examples from a research study of the learning of experienced engineers in the construction industry to demonstrate common practices - site walks and design review meetings - in which learning takes place.

Experimentation in software engineering

NASA Technical Reports Server (NTRS)

Basili, V. R.; Selby, R. W.; Hutchens, D. H.

1986-01-01

Experimentation in software engineering supports the advancement of the field through an iterative learning process. In this paper, a framework for analyzing most of the experimental work performed in software engineering over the past several years is presented. A variety of experiments in the framework is described and their contribution to the software engineering discipline is discussed. Some useful recommendations for the application of the experimental process in software engineering are included.

Assessment of clinical practice guideline methodology for the treatment of knee osteoarthritis with intra-articular hyaluronic acid.

PubMed

Altman, Roy D; Schemitsch, Emil; Bedi, Asheesh

2015-10-01

Clinical practice guidelines are of increasing importance in the decision making for the treatment of knee osteoarthritis. Inconsistent recommendations regarding the use of intra-articular hyaluronic acid for the treatment of knee osteoarthritis have led to confusion among treating physicians. Literature search to identify clinical practice guidelines that provide recommendations regarding the use of intra-articular hyaluronic acid treatment for knee osteoarthritis was conducted. Included guidelines were appraised using the AGREE II instrument. Guideline development methodologies, how the results were assessed, the recommendation formation, and work group composition were summarized. Overall, 10 clinical practice guidelines were identified that met our inclusion criteria. AGREE II domain scores were variable across the included guidelines. The methodology utilized across the guidelines was heterogeneous regarding the evidence inclusion criteria, analysis of evidence results, formulation of clinical practice recommendations, and work group composition. The recommendations provided by the guidelines for intra-articular hyaluronic acid treatment for knee osteoarthritis are highly inconsistent as a result of the variability in guideline methodology. Overall, 30% of the included guidelines recommended against the use of intra-articular hyaluronic acid in the treatment of knee osteoarthritis, while 30% deemed the treatment an appropriate intervention under certain scenarios. The remaining 40% of the guidelines provided either an uncertain recommendation or no recommendation at all, based on the high variability in reviewed evidence regarding efficacy and trial quality. There is a need for a standard "appropriate methodology" that is agreed upon for osteoarthritis clinical practice guidelines in order to prevent the development of conflicting recommendations for intra-articular hyaluronic acid treatment for knee osteoarthritis, and to assure that treating physicians who are utilizing these guidelines are making their clinical decisions on the best available evidence. At present, the inconsistent recommendations provided for intra-articular hyaluronic acid treatment make it difficult for clinical professionals to determine its appropriateness when treating patients with knee osteoarthritis. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Round-robin testing of Soleq EV cort according to the SAE J1634 test procedure dated May 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, G.H.

1993-05-01

The Society of Automotive Engineers Recommended Practice, SAE J1634, {open_quotes}Electric Vehicle Energy Consumption and Range Test Procedure{close_quotes}, May 1993, describes a standard method of determining the range and energy consumption for electric vehicles. Consequent to the U.S. Department of Energy`s (DOE) rulemaking released on February 4, 1994, the EPA is currently considering factoring electric vehicles into the Corporate Average Fuel Economy (CAFE) calculations using the SAE J1634 procedure. The purpose of this project is to provide information regarding the suitability of this recommended practice for determining the energy economy value to be factored into the CAFE. Issues leading to possiblemore » inconsistent results (such as the repeatability of the procedure, thoroughness of the procedure`s methods, and variance between different laboratories using different dynamometers) need to be resolved prior to passing legislation which will mandate use of this test in determining the electric vehicle CAFE credit. To this end, separate tests were performed on a Soleq EVcort vehicle by the INEL, the EPA, Ford Motor Company, Southwest Research Institute, and the California Air Resources Board using their own facilities and personnel. Acceptable departures from the driving profile prescribed by SAEJ1634 are not well defined. This deficiency in the procedure is even more noticeable due to the EVcort`s marginal acceleration performance.« less

A decade of environmental public health tracking (2002-2012): progress and challenges.

PubMed

Kearney, Gregory D; Namulanda, Gonza; Qualters, Judith R; Talbott, Evelyn O

2015-01-01

The creation of the Centers for Disease Control and Prevention Environmental Public Health Tracking Program spawned an invigorating and challenging approach toward implementing the nation's first population-based, environmental disease tracking surveillance system. More than 10 years have passed since its creation and an abundance of peer-reviewed articles have been published spanning a broad variety of public health topics related primarily to the goal of reducing diseases of environmental origin. To evaluate peer-reviewed literature related to Environmental Public Health Tracking during 2002-2012, recognize major milestones and challenges, and offer recommendations. A narrative overview was conducted using titles and abstracts of peer-reviewed articles, key word searches, and science-based search engine databases. Eighty published articles related to "health tracking" were identified and categorized according to 4 crossed-central themes. The Science and Research theme accounted for the majority of published articles, followed by Policy and Practice, Collaborations Among Health and Environmental Programs, and Network Development. Overall, progress was reported in the areas of data linkage, data sharing, surveillance methods, and network development. Ongoing challenges included formulating better ways to establish the connections between health and the environment, such as using biomonitoring, public water systems, and private well water data. Recommendations for future efforts include use of data to inform policy and practice and use of electronic health records data for environmental health surveillance.

The roles of engineering notebooks in shaping elementary engineering student discourse and practice

NASA Astrophysics Data System (ADS)

Hertel, Jonathan D.; Cunningham, Christine M.; Kelly, Gregory J.

2017-06-01

Engineering design challenges offer important opportunities for students to learn science and engineering knowledge and practices. This study examines how students' engineering notebooks across four units of the curriculum Engineering is Elementary (EiE) support student work during design challenges. Through educational ethnography and discourse analysis, transcripts of student talk and action were created and coded around the uses of notebooks in the accomplishment of engineering tasks. Our coding process identified two broad categories of roles of the notebooks: they scaffold student activity and support epistemic practices of engineering. The study showed the importance of prompts to engage students in effective uses of writing, the roles the notebook assumes in the students' small groups, and the ways design challenges motivate children to write and communicate.

Comparison of Quality Engineering Practices in Malaysian and Indonesian Automotive Related Companies

NASA Astrophysics Data System (ADS)

Putri, Nilda Tri; Sha'ri Mohd, Yusof; Irianto, Dradjad

2016-02-01

The main motivating factor driving this research is to find differences between the automotive related companies in Malaysia and Indonesia with regard to quality engineering (QE) implementation. A comparative study between Malaysia and Indonesia provides the opportunity to gain perspective and thorough understanding of the similarities and differences on the critical factors for successful QE practices in the context of both these countries. Face to face interviews are used to compare the QE practices in two automotive companies in Malaysia and Indonesia, respectively. The findings of study showed that both countries have clear quality objectives to achieving zero defects in processes and products and total customer satisfaction. Top and middle management in both countries were found to be directly involved in quality improvement on the shop floor to provide On-The-Job training and actively encourage team members to perform quality problem solving through the formation of quality control circles (QCC) particularly in Indonesia automotive industry. In Malaysia automotive industry, the implementation was not fully effective, but they have started to cultivate those values in the daily execution. Based on the case study results and analysis, the researcher has provided suggestions for both countries as an improvement plan for successful QE implementation. These recommendations will allow management to implement appropriate strategies for better QE implementation which hopefully can improve company's performance and ultimately the making the automotive industry in both countries to reach world class quality. It is strongly believed that the findings of this study can help Malaysia and Indonesia automotive industries in their efforts to become more effective and competitive.

Infection prevention and control of Clostridium difficile: a global review of guidelines, strategies, and recommendations

PubMed Central

Balsells, Evelyn; Filipescu, Teodora; Kyaw, Moe H.; Wiuff, Camilla; Campbell, Harry; Nair, Harish

2016-01-01

Background Clostridium difficile is the leading cause of health care–associated infections. Given the high incidence of C. difficile infection (CDI) and the lack of primary prevention through immunization, health care professionals should be aware of the most current guidance, as well as strengths and limitations of the evidence base underpinning this guidance. Methods We identified publicly available national or organizational guidelines related to CDI infection and prevention control (IPC) published between 2000 and 2015 and for any health care setting through an internet search using the Google search engine. We reviewed CDI–targeted IPC recommendations and describe the assessment of evidence in available guidelines. Results We identified documents from 28 countries/territories, mainly from acute care hospitals in North America, the Western Pacific, and Europe (18 countries). We identified only a few specific recommendations for long–term care facilities (LTCFs) and from countries in South America (Uruguay and Chile), South East Asia (Thailand), and none for Africa or Eastern Mediterranean. Of 10 IPC areas, antimicrobial stewardship was universally recognized as essential and supported by high quality evidence. Five other widely reported “strong” recommendations were: effective environment cleaning (including medical equipment), case isolation, use of personal protective equipment, surveillance, and education. Several unresolved and emerging issues were documented and currently available evidence was classified mainly as of mixed quality. Conclusion Our review underlines the need for targeted CDI IPC guidelines in several countries and for LTCFs. International harmonisation on the assessment of the evidence for best practices is needed as well as more robust evidence to support targeted recommendations. PMID:28028434

Infection prevention and control of Clostridium difficile: a global review of guidelines, strategies, and recommendations.

PubMed

Balsells, Evelyn; Filipescu, Teodora; Kyaw, Moe H; Wiuff, Camilla; Campbell, Harry; Nair, Harish

2016-12-01

Clostridium difficile is the leading cause of health care-associated infections. Given the high incidence of C. difficile infection (CDI) and the lack of primary prevention through immunization, health care professionals should be aware of the most current guidance, as well as strengths and limitations of the evidence base underpinning this guidance. We identified publicly available national or organizational guidelines related to CDI infection and prevention control (IPC) published between 2000 and 2015 and for any health care setting through an internet search using the Google search engine. We reviewed CDI-targeted IPC recommendations and describe the assessment of evidence in available guidelines. We identified documents from 28 countries/territories, mainly from acute care hospitals in North America, the Western Pacific, and Europe (18 countries). We identified only a few specific recommendations for long-term care facilities (LTCFs) and from countries in South America (Uruguay and Chile), South East Asia (Thailand), and none for Africa or Eastern Mediterranean. Of 10 IPC areas, antimicrobial stewardship was universally recognized as essential and supported by high quality evidence. Five other widely reported "strong" recommendations were: effective environment cleaning (including medical equipment), case isolation, use of personal protective equipment, surveillance, and education. Several unresolved and emerging issues were documented and currently available evidence was classified mainly as of mixed quality. Our review underlines the need for targeted CDI IPC guidelines in several countries and for LTCFs. International harmonisation on the assessment of the evidence for best practices is needed as well as more robust evidence to support targeted recommendations.

To adopt, to adapt, or to contextualise? The big question in clinical practice guideline development.

PubMed

Dizon, Janine Margarita; Machingaidze, Shingai; Grimmer, Karen

2016-09-13

Developing new clinical practice guidelines (CPGs) can be time-consuming and expensive. A more efficient approach could be to adopt, adapt or contextualise recommendations from existing good quality CPGs so that the resultant guidance is tailored to the local context. The first steps are to search for international CPGs that have a similar purpose, end-users and patients to your situation. The second step is to critically appraise the methodological quality of the CPGs to ensure that your guidance is based on credible evidence. Then the decisions begin. Can you simply 'adopt' this (parent) clinical practice guidelines, and implement the recommendations in their entirety, without any changes, in your setting? If so, then no further work is required. However this situation is rare. What is more likely, is that even if recommendations from the parent clinical practice guidelines can be adopted, how they are implemented needs to address local issues. Thus you may need to 'contextualise' the guidance, by addressing implementation issues such as local workforce, training, health systems, equipment and/or access to services. Generally this means that additional information is required (Practice/Context Points) to support effective implementation of the clinical practice guidelines recommendations. In some cases, you may need to 'adapt' the guidance, where you will make changes to the recommendations so that care is relevant to your local environments. This may involve additional work to search for local research, or obtain local consensus, regarding how best to adapt recommendations. For example, adaptation might reflect substituting one drug for another (drugs have similar effects, but the alternative drug to the recommended one may be cheaper, more easily obtained or more culturally acceptable). There is lack of standardisation of clinical practice guidelines terminology, leading clinical practice guideline activities often being poorly conceptualised or reported. We provide an approach that would help improve efficiency and standardisation of clinical practice guidelines activities.

INTERNATIONAL REPORT: Practical realization of the definition of the metre, including recommended radiations of other optical frequency standards (2003)

NASA Astrophysics Data System (ADS)

Felder, R.

2005-08-01

In 2003, the International Committee for Weights and Measures (CIPM) recommended updated values of the frequency for certain optical frequency standards recommended for the practical realization of the definition of the metre. The text of this CIPM Recommendation and details of the updated radiations are given here. The complete updated set of recommended radiations, including frequencies, wavelengths, uncertainties and operating conditions where appropriate, is available on the BIPM website.

Verbal-Visual Preferences of Working Engineers

ERIC Educational Resources Information Center

Baukal, Charles E.; Ausburn, Lynna J.

2016-01-01

Many have argued for increased continuing education for working engineers, but relatively little research has been done on how to most effectively teach that group. Many have also recommended using learner characteristics to enhance learning, but relatively little is known about the learner characteristics of working engineers. In the study…

Use of anthrax vaccine in the United States: recommendations of the Advisory Committee on Immunization Practices (ACIP), 2009.

PubMed

Wright, Jennifer Gordon; Quinn, Conrad P; Shadomy, Sean; Messonnier, Nancy

2010-07-23

These recommendations from the Advisory Committee on Immunization Practices (ACIP) update the previous recommendations for anthrax vaccine adsorbed (AVA) (CDC. Use of anthrax vaccine in the United States: Recommendations of the Advisory Committee on Immunization Practices [ACIP]. MMWR 2000;49:1-20; CDC. Use of anthrax vaccine in response to terrorism: supplemental recommendations of the Advisory Committee on Immunization Practices [ACIP]. MMWR 2002;51:1024-6) and reflect the status of anthrax vaccine supplies in the United States. This statement 1) provides updated information on anthrax epidemiology; 2) summarizes the evidence regarding the effectiveness and efficacy, immunogenicity, and safety of AVA; 3) provides recommendations for pre-event and preexposure use of AVA; and 4) provides recommendations for postexposure use of AVA. In certain instances, recommendations that did not change were clarified. No new licensed anthrax vaccines are presented. Substantial changes to these recommendations include the following: 1) reducing the number of doses required to complete the pre-event and preexposure primary series from 6 doses to 5 doses, 2) recommending intramuscular rather than subcutaneous AVA administration for preexposure use, 3) recommending AVA as a component of postexposure prophylaxis in pregnant women exposed to aerosolized Bacillus anthracis spores, 4) providing guidance regarding preexposure vaccination of emergency and other responder organizations under the direction of an occupational health program, and 5) recommending 60 days of antimicrobial prophylaxis in conjunction with 3 doses of AVA for optimal protection of previously unvaccinated persons after exposure to aerosolized B. anthracis spores.

Neonatal physical therapy. Part II: Practice frameworks and evidence-based practice guidelines.

PubMed

Sweeney, Jane K; Heriza, Carolyn B; Blanchard, Yvette; Dusing, Stacey C

2010-01-01

(1) To outline frameworks for neonatal physical therapy based on 3 theoretical models, (2) to describe emerging literature supporting neonatal physical therapy practice, and (3) to identify evidence-based practice recommendations. Three models are presented as a framework for neonatal practice: (1) dynamic systems theory including synactive theory and the theory of neuronal group selection, (2) the International Classification of Functioning, Disability and Health, and (3) family-centered care. Literature is summarized to support neonatal physical therapists in the areas of examination, developmental care, intervention, and parent education. Practice recommendations are offered with levels of evidence identified. Neonatal physical therapy practice has a theoretical and evidence-based structure, and evidence is emerging for selected clinical procedures. Continued research to expand the science of neonatal physical therapy is critical to elevate the evidence and support practice recommendations.

Molecular testing for cystic fibrosis carrier status practice guidelines: recommendations of the National Society of Genetic Counselors.

PubMed

Langfelder-Schwind, Elinor; Karczeski, Barbara; Strecker, Michelle N; Redman, Joy; Sugarman, Elaine A; Zaleski, Christina; Brown, Trisha; Keiles, Steven; Powers, Amy; Ghate, Sumheda; Darrah, Rebecca

2014-02-01

To provide practice recommendations for genetic counselors whose clients are considering cystic fibrosis (CF) carrier testing or seeking information regarding CF molecular test results. The goals of these recommendations are to: 1) Provide updated information about the natural history, diagnosis, and treatment of CF and related conditions. 2) Supplement genetic counselors' knowledge and understanding of the available carrier screening and diagnostic testing options. 3) Describe the current state of genotype/phenotype correlations for CFTR mutations and an approach to interpreting both novel and previously described variants. 4) Provide a framework for genetic counselors to assist clients' decision-making regarding CF carrier testing, prenatal diagnosis, and pregnancy management. Disclaimer The practice guidelines of the National Society of Genetic Counselors (NSGC) are developed by members of the NSGC to assist genetic counselors and other health care providers in making decisions about appropriate management of genetic concerns; including access to and/or delivery of services. Each practice guideline focuses on a clinical or practice-based issue, and is the result of a review and analysis of current professional literature believed to be reliable. As such, information and recommendations within the NSGC practice guidelines reflect the current scientific and clinical knowledge at the time of publication, are only current as of their publication date, and are subject to change without notice as advances emerge.In addition, variations in practice, which take into account the needs of the individual patient and the resources and limitations unique to the institution or type of practice, may warrant approaches, treatments and/or procedures that differ from the recommendations outlined in this guideline. Therefore, these recommendations should not be construed as dictating an exclusive course of management, nor does the use of such recommendations guarantee a particular outcome. Genetic counseling practice guidelines are never intended to displace a health care provider's best medical judgment based on the clinical circumstances of a particular patient or patient population.Practice guidelines are published by NSGC for educational and informational purposes only, and NSGC does not "approve" or "endorse" any specific methods, practices, or sources of information.

Iteration in Early-Elementary Engineering Design

NASA Astrophysics Data System (ADS)

McFarland Kendall, Amber Leigh

K-12 standards and curricula are beginning to include engineering design as a key practice within Science Technology Engineering and Mathematics (STEM) education. However, there is little research on how the youngest students engage in engineering design within the elementary classroom. This dissertation focuses on iteration as an essential aspect of engineering design, and because research at the college and professional level suggests iteration improves the designer's understanding of problems and the quality of design solutions. My research presents qualitative case studies of students in kindergarten and third-grade as they engage in classroom engineering design challenges which integrate with traditional curricula standards in mathematics, science, and literature. I discuss my results through the lens of activity theory, emphasizing practices, goals, and mediating resources. Through three chapters, I provide insight into how early-elementary students iterate upon their designs by characterizing the ways in which lesson design impacts testing and revision, by analyzing the plan-driven and experimentation-driven approaches that student groups use when solving engineering design challenges, and by investigating how students attend to constraints within the challenge. I connect these findings to teacher practices and curriculum design in order to suggest methods of promoting iteration within open-ended, classroom-based engineering design challenges. This dissertation contributes to the field of engineering education by providing evidence of productive engineering practices in young students and support for the value of engineering design challenges in developing students' participation and agency in these practices.

Integration of health technology assessment recommendations into organizational and clinical practice: A case study in Catalonia.

PubMed

Gagnon, Marie-Pierre; Sánchez, Emília; Pons, Joan M V

2006-01-01

Evaluating the impact of recommendations based upon health technology assessment (HTA) represents a challenge for both HTA agencies and healthcare policy makers. This research sought to understand factors affecting the uptake of HTA recommendations to support decision making with respect to the introduction of three health technologies. Using a multidimensional framework, based upon a combination of theoretical models, a case study was conducted. A total of twenty-eight semistructured interviews were done with physicians from fifteen hospitals and other stakeholders in Catalonia. Interview content was analyzed iteratively and classified according to theoretical dimensions and contextual factors. At the sociopolitical level, factors related to the organization and financing of the health system were found to affect the utilization of HTA recommendations. At the healthcare organization level, existing collaborations between the hospital and the HTA agency favored the integration of recommendations into practices. Formalism in the organization also influenced the utilization of HTA recommendations. At the professional level, the high degree of autonomy of specialists, the importance of peers and collegial control, and the definition of professional roles and responsibilities influenced physicians' willingness to integrate HTA recommendations into their practice. This study offers a comprehensive framework to understand the complex dynamics that affect adoption of health technologies in organizational and professional practices. The findings suggest some avenues to promote the integration of HTA recommendations into practices and, thus, increase the utilization of scientific evidence to support decision making in health care.

The European Engineer: A British Civil Engineering Viewpoint.

ERIC Educational Resources Information Center

Fleming, George

1988-01-01

Confronts the problems of defining the European Engineer in terms of educational and practical training. Analyzes the supply and demand requirements of engineering management and practice. Compares these analyses with conditions in the United States. Gives details of the educational process in a number of European countries. (CW)

Investigating Engineering Practice Is Valuable for Mathematics Learning

ERIC Educational Resources Information Center

Goold, Eileen

2015-01-01

While engineering mathematics curricula often prescribe a fixed body of mathematical knowledge, this study takes a different approach; second-year engineering students are additionally required to investigate and document an aspect of mathematics used in engineering practice. A qualitative approach is used to evaluate the impact that students'…

Ten Engineers Reading: Disjunctions between Preference and Practice in Civil Engineering Faculty Responses

ERIC Educational Resources Information Center

Taylor, Summer Smith; Patton, Martha D.

2006-01-01

Previous research has indicated that engineering faculty do not follow best practices when commenting on students' technical writing. However, it is unclear whether the faculty prefer to comment in these ineffective ways, or whether they prefer more effective practices but simply do not enact them. This study adapts a well known study of response…

The PULSE Vision & Change Rubrics, Version 1.0: A Valid and Equitable Tool to Measure Transformation of Life Sciences Departments at All Institution Types

PubMed Central

Brancaccio-Taras, Loretta; Pape-Lindstrom, Pamela; Peteroy-Kelly, Marcy; Aguirre, Karen; Awong-Taylor, Judy; Balser, Teri; Cahill, Michael J.; Frey, Regina F.; Jack, Thomas; Kelrick, Michael; Marley, Kate; Miller, Kathryn G.; Osgood, Marcy; Romano, Sandra; Uzman, J. Akif; Zhao, Jiuqing

2016-01-01

The PULSE Vision & Change Rubrics, version 1.0, assess life sciences departments’ progress toward implementation of the principles of the Vision and Change report. This paper reports on the development of the rubrics, their validation, and their reliability in measuring departmental change aligned with the Vision and Change recommendations. The rubrics assess 66 different criteria across five areas: Curriculum Alignment, Assessment, Faculty Practice/Faculty Support, Infrastructure, and Climate for Change. The results from this work demonstrate the rubrics can be used to evaluate departmental transformation equitably across institution types and represent baseline data about the adoption of the Vision and Change recommendations by life sciences programs across the United States. While all institution types have made progress, liberal arts institutions are farther along in implementing these recommendations. Generally, institutions earned the highest scores on the Curriculum Alignment rubric and the lowest scores on the Assessment rubric. The results of this study clearly indicate that the Vision & Change Rubrics, version 1.0, are valid and equitable and can track long-term progress of the transformation of life sciences departments. In addition, four of the five rubrics have broad applicability and can be used to evaluate departmental transformation by other science, technology, engineering, and mathematics disciplines. PMID:27856548

Developing Anticipatory Life Cycle Assessment Tools to Support Responsible Innovation

NASA Astrophysics Data System (ADS)

Wender, Benjamin

Several prominent research strategy organizations recommend applying life cycle assessment (LCA) early in the development of emerging technologies. For example, the US Environmental Protection Agency, the National Research Council, the Department of Energy, and the National Nanotechnology Initiative identify the potential for LCA to inform research and development (R&D) of photovoltaics and products containing engineered nanomaterials (ENMs). In this capacity, application of LCA to emerging technologies may contribute to the growing movement for responsible research and innovation (RRI). However, existing LCA practices are largely retrospective and ill-suited to support the objectives of RRI. For example, barriers related to data availability, rapid technology change, and isolation of environmental from technical research inhibit application of LCA to developing technologies. This dissertation focuses on development of anticipatory LCA tools that incorporate elements of technology forecasting, provide robust explorations of uncertainty, and engage diverse innovation actors in overcoming retrospective approaches to environmental assessment and improvement of emerging technologies. Chapter one contextualizes current LCA practices within the growing literature articulating RRI and identifies the optimal place in the stage gate innovation model to apply LCA. Chapter one concludes with a call to develop anticipatory LCA---building on the theory of anticipatory governance---as a series of methodological improvements that seek to align LCA practices with the objectives of RRI. Chapter two provides a framework for anticipatory LCA, identifies where research from multiple disciplines informs LCA practice, and builds off the recommendations presented in the preceding chapter. Chapter two focuses on crystalline and thin film photovoltaics (PV) to illustrate the novel framework, in part because PV is an environmentally motivated technology undergoing extensive R&D efforts and rapid increases in scale of deployment. The chapter concludes with a series of research recommendations that seek to direct PV research agenda towards pathways with the greatest potential for environmental improvement. Similar to PV, engineered nanomaterials (ENMs) are an emerging technology with numerous potential applications, are the subject of active R&D efforts, and are characterized by high uncertainty regarding potential environmental implications. Chapter three introduces a Monte Carlo impact assessment tool based on the toxicity impact assessment model USEtox and demonstrates stochastic characterization factor (CF) development to prioritize risk research with the greatest potential to improve certainty in CFs. The case study explores a hypothetical decision in which personal care product developers are interested in replacing the conventional antioxidant niacinamide with the novel ENM C 60, but face high data uncertainty, are unsure regarding potential ecotoxicity impacts associated with this substitution, and do not know what future risk-relevant experiments to invest in that most efficiently improve certainty in the comparison. Results suggest experiments that elucidate C60 partitioning to suspended solids should be prioritized over parameters with little influence on results. This dissertation demonstrates a novel anticipatory approach to exploration of uncertainty in environmental models that can create new, actionable knowledge with potential to guide future research and development decisions.

Guidance on How to Move from Current Practice to Recommended Practice in Life Cycle Impact Assessment (UNEP/SETAC Life Cycle Initiative Publication)

EPA Science Inventory

The report provides guidance on how to move from current practice to recommended practice in Life Cycle Impact Assessment. It is composed of three complementary parts elaborated in the first task force (TFI) of the LCIA programme, with contribution of the other three task forces:

Contact Dermatitis for the Practicing Allergist.

PubMed

Bernstein, David I

2015-01-01

This article provides an overview of important practice recommendations from the recently updated Contact Dermatitis Practice Parameter. This updated parameter provides essential recommendations pertaining to clinical history, physical examination, and patch testing evaluation of patients suspected of allergic contact dermatitis. In addition to providing guidance for performing and interpreting closed patch testing, the updated parameter provides concrete recommendations for assessing metal hypersensitivity in patients receiving prosthetic devices, for evaluating workers with occupational contact dermatitis, and also for addressing allergic contact dermatitis in children. Finally, the document provides practical recommendations useful for educating patients regarding avoidance of exposure to known contact sensitizers in the home and at work. The Contact Dermatitis Parameter is designed as a practical, evidence-based clinical tool to be used by allergists and dermatologists who routinely are called upon to evaluate patients with skin disorders. Copyright © 2015 American Academy of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

Improving the dependability of research in personality and social psychology: recommendations for research and educational practice.

PubMed

Funder, David C; Levine, John M; Mackie, Diane M; Morf, Carolyn C; Sansone, Carol; Vazire, Simine; West, Stephen G

2014-02-01

In this article, the Society for Personality and Social Psychology (SPSP) Task Force on Publication and Research Practices offers a brief statistical primer and recommendations for improving the dependability of research. Recommendations for research practice include (a) describing and addressing the choice of N (sample size) and consequent issues of statistical power, (b) reporting effect sizes and 95% confidence intervals (CIs), (c) avoiding "questionable research practices" that can inflate the probability of Type I error, (d) making available research materials necessary to replicate reported results, (e) adhering to SPSP's data sharing policy, (f) encouraging publication of high-quality replication studies, and (g) maintaining flexibility and openness to alternative standards and methods. Recommendations for educational practice include (a) encouraging a culture of "getting it right," (b) teaching and encouraging transparency of data reporting, (c) improving methodological instruction, and (d) modeling sound science and supporting junior researchers who seek to "get it right."

Assessment of range planting as a conservation practice

Treesearch

Stuart P. Hardegree; Bruce A. Roundy; Nancy L. Shaw; Corey A. Moffet; Thomas A. Monaco; Thomas A. Jones; Edward F. Redente

2009-01-01

NRCS range-planting Conservation Practice standards are used to develop management recommendations for improving vegetation composition an productivity of grazed plant communities. Individual Conservation Practice recommendations are implemented within a Conservation-Management-System in areas where the existing plant-community attributes are insufficient to meet...

Human Genetic Engineering: A Survey of Student Value Stances

ERIC Educational Resources Information Center

Wilson, Sara McCormack; And Others

1975-01-01

Assesses the values of high school and college students relative to human genetic engineering and recommends that biology educators explore instructional strategies merging human genetic information with value clarification techniques. (LS)

Advanced nozzle and engine components test facility

NASA Technical Reports Server (NTRS)

Beltran, Luis R.; Delroso, Richard L.; Delrosario, Ruben

1992-01-01

A test facility for conducting scaled advanced nozzle and engine component research is described. The CE-22 test facility, located in the Engine Research Building of the NASA Lewis Research Center, contains many systems for the economical testing of advanced scale-model nozzles and engine components. The combustion air and altitude exhaust systems are described. Combustion air can be supplied to a model up to 40 psig for primary air flow, and 40, 125, and 450 psig for secondary air flow. Altitude exhaust can be simulated up to 48,000 ft, or the exhaust can be atmospheric. Descriptions of the multiaxis thrust stand, a color schlieren flow visualization system used for qualitative flow analysis, a labyrinth flow measurement system, a data acquisition system, and auxiliary systems are discussed. Model recommended design information and temperature and pressure instrumentation recommendations are included.

Compliance with recommended care at trauma centers: association with patient outcomes.

PubMed

Shafi, Shahid; Barnes, Sunni A; Rayan, Nadine; Kudyakov, Rustam; Foreman, Michael; Cryer, H Gil; Alam, Hasan B; Hoff, William; Holcomb, John

2014-08-01

State health departments and the American College of Surgeons focus on the availability of optimal resources to designate hospitals as trauma centers, with little emphasis on actual delivery of care. There is no systematic information on clinical practices at designated trauma centers. The objective of this study was to measure compliance with 22 commonly recommended clinical practices at trauma centers and its association with in-hospital mortality. This retrospective observational study was conducted at 5 Level I trauma centers across the country. Participants were adult patients with moderate to severe injuries (n = 3,867). The association between compliance with 22 commonly recommended clinical practices and in-hospital mortality was measured after adjusting for patient demographics and injuries and their severity. Compliance with individual clinical practices ranged from as low as 12% to as high as 94%. After adjusting for patient demographics and injury severity, each 10% increase in compliance with recommended care was associated with a 14% reduction in the risk of death. Patients who received all recommended care were 58% less likely to die (odds ratio = 0.42; 95% CI, 0.28-0.62) compared with those who did not. Compliance with commonly recommended clinical practices remains suboptimal at designated trauma centers. Improved adoption of these practices can reduce mortality. Copyright © 2014 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

The EPSRC's Policy of Responsible Innovation from a Trading Zones Perspective.

PubMed

Murphy, Joseph; Parry, Sarah; Walls, John

Responsible innovation (RI) is gathering momentum as an academic and policy debate linking science and society. Advocates of RI in research policy argue that scientific research should be opened up at an early stage so that many actors and issues can steer innovation trajectories. If this is done, they suggest, new technologies will be more responsible in different ways, better aligned with what society wants, and mistakes of the past will be avoided. This paper analyses the dynamics of RI in policy and practice and makes recommendations for future development. More specifically, we draw on the theory of 'trading zones' developed by Peter Galison and use it to analyse two related processes: (i) the development and inclusion of RI in research policy at the UK's Engineering and Physical Sciences Research Council (EPSRC); (ii) the implementation of RI in relation to the Stratospheric Particle Injection for Climate Engineering (SPICE) project. Our analysis reveals an RI trading zone comprised of three quasi-autonomous traditions of the research domain - applied science, social science and research policy. It also shows how language and expertise are linking and coordinating these traditions in ways shaped by local conditions and the wider context of research. Building on such insights, we argue that a sensible goal for RI policy and practice at this stage is better local coordination of those involved and we suggest ways how this might be achieved.

FRP : Strengthened RC Structures

NASA Astrophysics Data System (ADS)

Teng, J. G.; Chen, J. F.; Smith, S. T.; Lam, L.

2002-01-01

The strengthening of reinforced concrete (RC) structures using advanced fibre-reinforced polymer (FRP) composites, and in particular the behaviour of FRP-strengthened RC structures is a topic which has become very popular in recent years. This popularity has arisen due to the need to maintain and upgrade essential infrastructure in all parts of the world, combined with the well-known advantages of FRP composites, such as good corrosion resistance and ease for site handling due to their light weight. The continuous reduction in the material cost of FRP composites has also contributed to their popularity. While a great amount of research now exists in the published literature on this topic, it is scattered in various journals and conference proceedings. This book therefore provides the first ever comprehensive, state-of-the-art summary of the existing research on FRP strengthening of RC structures, with the emphasis being on structural behaviour and strength models. The main topics covered include: Bond behaviour Flexural and shear strengthening of beams Column strengthening Flexural strengthening of slabs. For each area, the methods of strengthening are discussed, followed by a description of behaviour and failure modes and then the presentation of rational design recommendations, for direct use in practical design of FRP strengthening measures. Researchers, practicing engineers, code writers and postgraduate students in structural engineering and construction materials, as well as consulting firms, government departments, professional bodies, contracting firms and FRP material suppliers will find this an invaluable resource.

Carbon Monoxide Hazards from Small Gasoline Powered Engines

MedlinePlus

... IN OTHER SHELTERED AREAS. Provide recommendations for equipment maintenance to reduce CO emissions. Recommend the use of ... Privacy FOIA No Fear Act OIG 1600 Clifton Road Atlanta , GA 30329-4027 USA 800-CDC-INFO ( ...

Closing the gap in systems engineering education for the space industry

NASA Technical Reports Server (NTRS)

Carlisle, R.

1986-01-01

The education of system engineers with emphasis on designing systems for space applications is discussed. System engineers determine the functional requirements, performance needs, and implementation procedures for proposed systems and their education is based on aeronautics and mathematics. Recommendations from industry for improving the curriculum of system engineers at the undergraduate and graduate levels are provided. The assistance provided by companies to the education of system engineers is examined.

Advanced General Aviation Turbine Engine (GATE) concepts

NASA Technical Reports Server (NTRS)

Lays, E. J.; Murray, G. L.

1979-01-01

Concepts are discussed that project turbine engine cost savings through use of geometrically constrained components designed for low rotational speeds and low stress to permit manufacturing economies. Aerodynamic development of geometrically constrained components is recommended to maximize component efficiency. Conceptual engines, airplane applications, airplane performance, engine cost, and engine-related life cycle costs are presented. The powerplants proposed offer encouragement with respect to fuel efficiency and life cycle costs, and make possible remarkable airplane performance gains.

Integration of tobacco cessation services into multidisciplinary lung cancer care: rationale, state of the art, and future directions

PubMed Central

Warren, Graham W.

2015-01-01

Tobacco use is the largest risk factor for lung cancer and many lung cancer patients still smoke at the time of diagnosis. Although clinical practice guidelines recommend that all patients receive evidence-based tobacco treatment, implementation of these services in oncology practices is inconsistent and inadequate. Multidisciplinary lung cancer treatment programs offer an ideal environment to optimally deliver effective smoking cessation services. This article reviews best practice recommendations and current status of tobacco treatment for oncology patients, and provides recommendations to optimize delivery of tobacco treatment in multidisciplinary practice. PMID:26380175

Assessment of Technologies for the Space Shuttle External Tank Thermal Protection System and Recommendations for Technology Improvement. Part 2; Structural Analysis Technologies and Modeling Practices

NASA Technical Reports Server (NTRS)

Knight, Norman F., Jr.; Nemeth, Michael P.; Hilburger, Mark W.

2004-01-01

A technology review and assessment of modeling and analysis efforts underway in support of a safe return to flight of the thermal protection system (TPS) for the Space Shuttle external tank (ET) are summarized. This review and assessment effort focuses on the structural modeling and analysis practices employed for ET TPS foam design and analysis and on identifying analysis capabilities needed in the short-term and long-term. The current understanding of the relationship between complex flight environments and ET TPS foam failure modes are reviewed as they relate to modeling and analysis. A literature review on modeling and analysis of TPS foam material systems is also presented. Finally, a review of modeling and analysis tools employed in the Space Shuttle Program is presented for the ET TPS acreage and close-out foam regions. This review includes existing simplified engineering analysis tools are well as finite element analysis procedures.

30 CFR 250.114 - How must I install and operate electrical equipment?

Code of Federal Regulations, 2011 CFR

2011-07-01

... structures, and their facilities. (a) You must classify all areas according to API RP 500, Recommended... Class I, Division 1 and Division 2, or API RP 505, Recommended Practice for Classification of Locations... according to API RP 14F, Recommended Practice for Design and Installation of Electrical Systems for Fixed...

Engineering: Defining and differentiating its unique culture

NASA Astrophysics Data System (ADS)

Pilotte, Mary K.

The world of work for engineering professionals is changing. At a rapid pace, experienced engineers are exiting the workforce due to retirement of the Baby Boomer generation, while at the same time the problems facing engineers are increasingly complex and frequently global in nature. For firms to protect their knowledge assets, they must ensure that acquired understandings are shared among their engineering work groups. Engineering teaching and learning in the workplace (i.e., knowledge sharing), is a social activity that resides in a social context governed by the professional engineering culture. This quantitative study uses Hofstede's Organizational Cultural Values Model (Hofstede, Neuijen, Ohayv, & Sanders, 1990) to examine dimensions of engineering culture in the workplace, producing a central tendency profile of engineering's cultural practices. Further, it explores through hypotheses if demographic differentiators, including birth generation, gender, race, industry sector of employment, and engineering discipline, play roles in forming engineering cultural practices. Results both corroborate aspects of Hofstede's model and assert new understandings relative to factors influencing dimensions of engineering practice. Outcomes are discussed in terms of their potential impact on industrial knowledge sharing and formation of beneficial engineering cultures.

Guidelines for the welfare and use of animals in cancer research

PubMed Central

Workman, P; Aboagye, E O; Balkwill, F; Balmain, A; Bruder, G; Chaplin, D J; Double, J A; Everitt, J; Farningham, D A H; Glennie, M J; Kelland, L R; Robinson, V; Stratford, I J; Tozer, G M; Watson, S; Wedge, S R; Eccles, S A

2010-01-01

Animal experiments remain essential to understand the fundamental mechanisms underpinning malignancy and to discover improved methods to prevent, diagnose and treat cancer. Excellent standards of animal care are fully consistent with the conduct of high quality cancer research. Here we provide updated guidelines on the welfare and use of animals in cancer research. All experiments should incorporate the 3Rs: replacement, reduction and refinement. Focusing on animal welfare, we present recommendations on all aspects of cancer research, including: study design, statistics and pilot studies; choice of tumour models (e.g., genetically engineered, orthotopic and metastatic); therapy (including drugs and radiation); imaging (covering techniques, anaesthesia and restraint); humane endpoints (including tumour burden and site); and publication of best practice. PMID:20502460

Structural considerations for solar installers : an approach for small, simplified solar installations or retrofits.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richards, Elizabeth H.; Schindel, Kay; Bosiljevac, Tom

2011-12-01

Structural Considerations for Solar Installers provides a comprehensive outline of structural considerations associated with simplified solar installations and recommends a set of best practices installers can follow when assessing such considerations. Information in the manual comes from engineering and solar experts as well as case studies. The objectives of the manual are to ensure safety and structural durability for rooftop solar installations and to potentially accelerate the permitting process by identifying and remedying structural issues prior to installation. The purpose of this document is to provide tools and guidelines for installers to help ensure that residential photovoltaic (PV) power systemsmore » are properly specified and installed with respect to the continuing structural integrity of the building.« less

Preliminary evaluation of the feasibility of artificial recharge in northern Qater

USGS Publications Warehouse

Vecchioli, John

1976-01-01

Fresh ground water in northern Qatar occurs as a lens in limestone and dolomite of Eocene age. Natural recharge from precipitation averages 17x106 cubic metres per year whereas current discharge averages 26.6x106 cubic metres per year. Depletion of storage is accompanied by a deterioration in quality due to encroachment of salty water from the Gulf and from underlying formations. Artificial recharge with desalted sea water to permit additional agricultural development appears technically feasible but its practicability needs to be examined further. A hydrogeological appraisal including test drilling, geophysical logging, pumping tests, and a recharge test, coupled with engineering analysis of direct surface storage/distribution of desalted sea water versus aquifer storage/distribution, is recommended.

Study on utilization of advanced composites in commercial aircraft wing structures. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Sakata, I. F.; Ostrom, R. B.; Cardinale, S. V.

1978-01-01

The effort required by commercial transport manufacturers to accomplish the transition from current construction materials and practices to extensive use of composites in aircraft wings was investigated. The engineering and manufacturing disciplines which normally participate in the design, development, and production of an aircraft were employed to ensure that all of the factors that would enter a decision to commit to production of a composite wing structure were addressed. A conceptual design of an advanced technology reduced energy aircraft provided the framework for identifying and investigating unique design aspects. A plan development effort defined the essential technology needs and formulated approaches for effecting the required wing development. The wing development program plans, resource needs, and recommendations are summarized.

Improving the Practical Education of Chemical and Pharmaceutical Engineering Majors in Chinese Universities

ERIC Educational Resources Information Center

Zhao, Feng-qing; Yu, Yi-feng; Ren, Shao-feng; Liu, Shao-jie; Rong, Xin-yu

2014-01-01

Practical education in chemical engineering has drawn increasing attention in recent years. This paper discusses two approaches to teaching and learning about experiments among upper-level chemical and pharmaceutical engineering majors in China. On the basis of years of experience in teaching chemical and pharmaceutical engineering, we propose the…

Teaching Bioprocess Engineering to Undergraduates: Multidisciplinary Hands-On Training in a One-Week Practical Course

ERIC Educational Resources Information Center

Henkel, Marius; Zwick, Michaela; Beuker, Janina; Willenbacher, Judit; Baumann, Sandra; Oswald, Florian; Neumann, Anke; Siemann-Herzberg, Martin; Syldatk, Christoph; Hausmann, Rudolf

2015-01-01

Bioprocess engineering is a highly interdisciplinary field of study which is strongly benefited by practical courses where students can actively experience the interconnection between biology, engineering, and physical sciences. This work describes a lab course developed for 2nd year undergraduate students of bioprocess engineering and related…

Proposing application of results in sport and exercise research reports.

PubMed

Knudson, Duane; Elliott, Bruce; Hamill, Joseph

2014-09-01

The application of sport and exercise research findings to practice requires careful interpretation and integration of evidence. This paper reviews principles of evidence-based practice and the application of research in sports and exercise, in order to provide recommendations on developing appropriate application sections in research reports for sport and exercise journals. The strength of recommendations for application fall into one of four levels, with potential applications qualified as strong, limited, preliminary, or hypothesized. Specific limitations that should be discussed in framing recommendations for practice are also noted for each of these levels that should be useful for authors, and for practitioners and clinicians in interpreting these recommendations.

Training Research: Practical Recommendations for Maximum Impact

PubMed Central

Beidas, Rinad S.; Koerner, Kelly; Weingardt, Kenneth R.; Kendall, Philip C.

2011-01-01

This review offers practical recommendations regarding research on training in evidence-based practices for mental health and substance abuse treatment. When designing training research, we recommend: (a) aligning with the larger dissemination and implementation literature to consider contextual variables and clearly defining terminology, (b) critically examining the implicit assumptions underlying the stage model of psychotherapy development, (c) incorporating research methods from other disciplines that embrace the principles of formative evaluation and iterative review, and (d) thinking about how technology can be used to take training to scale throughout all stages of a training research project. An example demonstrates the implementation of these recommendations. PMID:21380792

Evidence-practice gap for dental sealant application: results from a dental practice-based research network in Japan.

PubMed

Yokoyama, Yoko; Kakudate, Naoki; Sumida, Futoshi; Matsumoto, Yuki; Gilbert, Gregg H; Gordan, Valeria V

2016-12-01

The study aims were: (i) to examine dentist practice patterns regarding treatment recommendations for dental sealants; and (ii) to identify characteristics associated with this recommendation. The study was performed using a cross-sectional questionnaire survey (Clinicaltrials.gov registration number NCT01680848). Participants were Japanese dentists (n = 282) recruited from the Dental Practice-based Research Network Japan. Three clinical photographs of the occlusal surface of a mandibular first molar were presented, portraying increasing depths of cavitation in a 12-year-old patient with high caries risk. Sealants would be an appropriate treatment in all three scenarios. We asked about the treatment decision for each case. We then performed multiple logistic regression analyses to evaluate associations between the decision to recommend sealants, and dentist, patient and practice characteristics. Responses were obtained from 189 dentists (response rate = 67%). In the hypothetical scenarios, dentists' recommendations for sealants for the 12-year-old patient varied from 16% to 26% across the three hypothetical clinical scenarios. Multiple logistic regression analysis indicated that dentist agreement with the efficacy of assessment for caries risk showed a significant association with the percentages of patients receiving sealants. Dentist practice patterns for sealant treatment recommendation show changes that are dependent on caries severity. The dentists' recommendations for sealants for the 12-year-old patient were low for all three selected scenarios, based on indications for sealants in the American Dental Association guidelines. Recommending a sealant showed a significant relationship with the dentist having a higher agreement with efficacy of caries risk assessment. © 2016 FDI World Dental Federation.

Evaluation of an F100 multivariable control using a real-time engine simulation

NASA Technical Reports Server (NTRS)

Szuch, J. R.; Skira, C.; Soeder, J. F.

1977-01-01

A multivariable control design for the F100 turbofan engine was evaluated, as part of the F100 multivariable control synthesis (MVCS) program. The evaluation utilized a real-time, hybrid computer simulation of the engine and a digital computer implementation of the control. Significant results of the evaluation are presented and recommendations concerning future engine testing of the control are made.

Development and empirical user-centered evaluation of semantically-based query recommendation for an electronic health record search engine.

PubMed

Hanauer, David A; Wu, Danny T Y; Yang, Lei; Mei, Qiaozhu; Murkowski-Steffy, Katherine B; Vydiswaran, V G Vinod; Zheng, Kai

2017-03-01

The utility of biomedical information retrieval environments can be severely limited when users lack expertise in constructing effective search queries. To address this issue, we developed a computer-based query recommendation algorithm that suggests semantically interchangeable terms based on an initial user-entered query. In this study, we assessed the value of this approach, which has broad applicability in biomedical information retrieval, by demonstrating its application as part of a search engine that facilitates retrieval of information from electronic health records (EHRs). The query recommendation algorithm utilizes MetaMap to identify medical concepts from search queries and indexed EHR documents. Synonym variants from UMLS are used to expand the concepts along with a synonym set curated from historical EHR search logs. The empirical study involved 33 clinicians and staff who evaluated the system through a set of simulated EHR search tasks. User acceptance was assessed using the widely used technology acceptance model. The search engine's performance was rated consistently higher with the query recommendation feature turned on vs. off. The relevance of computer-recommended search terms was also rated high, and in most cases the participants had not thought of these terms on their own. The questions on perceived usefulness and perceived ease of use received overwhelmingly positive responses. A vast majority of the participants wanted the query recommendation feature to be available to assist in their day-to-day EHR search tasks. Challenges persist for users to construct effective search queries when retrieving information from biomedical documents including those from EHRs. This study demonstrates that semantically-based query recommendation is a viable solution to addressing this challenge. Published by Elsevier Inc.

Constructing engineers through practice: Gendered features of learning and identity development

NASA Astrophysics Data System (ADS)

Tonso, Karen L.

How do women and men student engineers develop an engineering identity (a sense of belonging, or not), while practicing "actual" engineering? What are the influences of gender, learning and knowledge, relations of power, and conceptions of equality on cultural identity development? I studied these issues in reform-minded engineering design classes, courses organized around teaching students communications, teamwork, and practical engineering. Engineering-student cultural identity categories revealed a status hierarchy, predicated on meeting "academic" criteria for excellence, and the almost total exclusion of women. While working as an engineering colleague on five student teams (three first-year and two senior) and attending their design classes, I documented how cultural identities were made evident and constructed in students' practical engineering. Design projects promoted linking academic knowledge with real-world situations, sharing responsibilities and trusting colleagues, communicating engineering knowledge to technical and non-technical members of business communities, and addressing gaps in students' knowledge. With a curriculum analysis and survey of students' perceptions of the differences between design and conventional courses, I embedded the design classes in the wider campus and found that: (1) Engineering education conferred prestige, power, and well-paying jobs on students who performed "academic" engineering, while failing to adequately encourage "actual" engineering practices. High-status student engineers were the least likely to perform "actual" engineering in design teams. (2) Engineering education advanced an ideology that encouraged its practitioners to consider men's privilege and women's invisibility normal. By making "acting like men act" the standards to which engineering students must conform, women learned to put up with oppressive treatment. Women's accepting their own mistreatment and hiding their womanhood became a condition of women's belonging. (3) Despite all of the pressures to do otherwise, (some) teams of students (at all levels) carved out small oases where "actual" engineering prevailed and women's participation was robust. Students--not faculty, not progressive pedagogy, not "reformed" courses--disrupted prevailing norms. However, two women engineering students, one on each senior team, performed fabulous "actual" engineering, yet neither of them had a job when they graduated--the only two senior students on my teams without jobs.

40 CFR 1065.372 - NDUV analyzer HC and H2O interference verification.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calibrations and Verifications Nox and N2o... recommend that you extract engine exhaust to perform this verification. Use a CLD that meets the..., if one is used during testing, introduce the engine exhaust to the NDUV analyzer. (4) Allow time for...

40 CFR 1065.372 - NDUV analyzer HC and H2O interference verification.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calibrations and Verifications Nox and N2o... recommend that you extract engine exhaust to perform this verification. Use a CLD that meets the..., if one is used during testing, introduce the engine exhaust to the NDUV analyzer. (4) Allow time for...

40 CFR 1065.372 - NDUV analyzer HC and H2O interference verification.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calibrations and Verifications Nox and N2o... recommend that you extract engine exhaust to perform this verification. Use a CLD that meets the..., if one is used during testing, introduce the engine exhaust to the NDUV analyzer. (4) Allow time for...

40 CFR 1065.372 - NDUV analyzer HC and H2O interference verification.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calibrations and Verifications Nox and N2o... recommend that you extract engine exhaust to perform this verification. Use a CLD that meets the..., if one is used during testing, introduce the engine exhaust to the NDUV analyzer. (4) Allow time for...

Science and Engineering Indicators 2010. NSB 10-01

ERIC Educational Resources Information Center

Lehming, Rolf F.; Alt, Martha Naomi; Chen, Xianglei; Hall, Leslie; Burton, Lawrence; Burrelli, Joan S.; Kannankutty, Nirmala; Proudfoot, Steven; Regets, Mark C.; Boroush, Mark; Moris, Francisco A.; Wolfe, Raymond M.; Britt, Ronda; Christovich, Leslie; Hill, Derek; Falkenheim, Jaquelina C.; Dunnigan, Paula C.

2010-01-01

"Science and Engineering Indicators" (SEI) is first and foremost a volume of record comprising the major high-quality quantitative data on the U.S. and international science and engineering enterprise. SEI is factual and policy neutral. It does not offer policy options, and it does not make policy recommendations. SEI employs a variety…

Science and Engineering Indicators 2012. NSB 12-01

ERIC Educational Resources Information Center

National Science Foundation, 2012

2012-01-01

Science and Engineering Indicators (SEI) is first and foremost a volume of record comprising the major high-quality quantitative data on the U.S. and international science and engineering enterprise. SEI is factual and policy neutral. It does not offer policy options, and it does not make policy recommendations. SEI employs a variety of…

"I Take Engineering with Me": Epistemological Transitions across an Engineering Curriculum

ERIC Educational Resources Information Center

Winberg, Christine; Winberg, Simon; Jacobs, Cecilia; Garraway, James; Engel-Hills, Penelope

2016-01-01

In this paper we study epistemological transitions across an intended engineering curriculum and recommend strategies to assist students in attaining the increasingly complex concepts and insights that are necessary for transition to advanced levels of study. We draw on Legitimation Code Theory [Maton, Karl. 2014, "Knowledge and Knowers:…

Evidence-Based Consensus Recommendations for Colposcopy Practice for Cervical Cancer Prevention in the United States.

PubMed

Wentzensen, Nicolas; Massad, L Stewart; Mayeaux, Edward J; Khan, Michelle J; Waxman, Alan G; Einstein, Mark H; Conageski, Christine; Schiffman, Mark H; Gold, Michael A; Apgar, Barbara S; Chelmow, David; Choma, Kim K; Darragh, Teresa M; Gage, Julia C; Garcia, Francisco A R; Guido, Richard S; Jeronimo, Jose A; Liu, Angela; Mathews, Cara A; Mitchell, Martha M; Moscicki, Anna-Barbara; Novetsky, Akiva P; Papasozomenos, Theognosia; Perkins, Rebecca B; Silver, Michelle I; Smith, Katie M; Stier, Elizabeth A; Tedeschi, Candice A; Werner, Claudia L; Huh, Warner K

2017-10-01

The American Society for Colposcopy and Cervical Pathology (ASCCP) Colposcopy Standards recommendations address the role of colposcopy and directed biopsy for cervical cancer prevention in the United States (US). The recommendations were developed by an expert working group appointed by ASCCP's Board of Directors. An extensive literature review was conducted and supplemented by a systematic review and meta-analysis of unpublished data. In addition, a survey of practicing colposcopists was conducted to assess current colposcopy practice in the US. Recommendations were approved by the working group members, and the final revisions were made based on comments received from the public. The recommendations cover terminology, risk-based colposcopy, colposcopy procedures, and colposcopy adjuncts. The ASCCP Colposcopy Standards recommendations are an important step toward raising the standard of colposcopy services delivered to women in the US. Because cervical cancer screening programs are currently undergoing important changes that may affect colposcopy performance, updates to some of the current recommendations may be necessary in the future.

International short-term medical missions: a systematic review of recommended practices.

PubMed

Roche, Stephanie D; Ketheeswaran, Pavinarmatha; Wirtz, Veronika J

2017-01-01

To identify practices for conducting international short-term medical missions (STMMs) recommended in the literature and examine how these link STMMs to recipient countries' existing health systems. Systematic review of PubMed-indexed articles on STMMs and their bibliographies using preferred reporting items for systematic reviews and meta-analyses guidelines. Recommendations were organized using the World Health Organization Health Systems Framework. In 92 publications, 67 % offered at least one recommendation that would link STMMs to the recipient country's health system. Among these recommendations, most focused on service delivery and few on health financing and governance. There is a lack of consensus around a proper standard of care, patient selection, and trip duration. Comprehensive global standards are needed for STMM work to ensure that services are beneficial both to patients and to the broader healthcare systems of recipient countries. By providing an overview of the current recommendations and important gaps where practice recommendations are needed, this study can provide relevant input into the development of global standards for STMMs.

A Group Recommender System for Tourist Activities

NASA Astrophysics Data System (ADS)

Garcia, Inma; Sebastia, Laura; Onaindia, Eva; Guzman, Cesar

This paper introduces a method for giving recommendations of tourist activities to a group of users. This method makes recommendations based on the group tastes, their demographic classification and the places visited by the users in former trips. The group recommendation is computed from individual personal recommendations through the use of techniques such as aggregation, intersection or incremental intersection. This method is implemented as an extension of the e-Tourism tool, which is a user-adapted tourism and leisure application, whose main component is the Generalist Recommender System Kernel (GRSK), a domain-independent taxonomy-driven search engine that manages the group recommendation.

Digital dissemination platform of transportation engineering education materials.

DOT National Transportation Integrated Search

2014-09-01

National agencies have called for more widespread adoption of best practices in engineering education. To facilitate this sharing of practices we will develop a web-based system that will be used by transportation engineering educators to share curri...

Action to Support Practices Implement Research Evidence (ASPIRE): protocol for a cluster-randomised evaluation of adaptable implementation packages targeting 'high impact' clinical practice recommendations in general practice.

PubMed

Willis, Thomas A; Hartley, Suzanne; Glidewell, Liz; Farrin, Amanda J; Lawton, Rebecca; McEachan, Rosemary R C; Ingleson, Emma; Heudtlass, Peter; Collinson, Michelle; Clamp, Susan; Hunter, Cheryl; Ward, Vicky; Hulme, Claire; Meads, David; Bregantini, Daniele; Carder, Paul; Foy, Robbie

2016-02-29

There are recognised gaps between evidence and practice in general practice, a setting which provides particular challenges for implementation. We earlier screened clinical guideline recommendations to derive a set of 'high impact' indicators based upon criteria including potential for significant patient benefit, scope for improved practice and amenability to measurement using routinely collected data. We aim to evaluate the effectiveness and cost-effectiveness of a multifaceted, adaptable intervention package to implement four targeted, high impact recommendations in general practice. The research programme Action to Support Practice Implement Research Evidence (ASPIRE) includes a pair of pragmatic cluster-randomised trials which use a balanced incomplete block design. Clusters are general practices in West Yorkshire, United Kingdom (UK), recruited using an 'opt-out' recruitment process. The intervention package adapted to each recommendation includes combinations of audit and feedback, educational outreach visits and computerised prompts with embedded behaviour change techniques selected on the basis of identified needs and barriers to change. In trial 1, practices are randomised to adapted interventions targeting either diabetes control or risky prescribing and those in trial 2 to adapted interventions targeting either blood pressure control in patients at risk of cardiovascular events or anticoagulation in atrial fibrillation. The respective primary endpoints comprise achievement of all recommended target levels of haemoglobin A1c (HbA1c), blood pressure and cholesterol in patients with type 2 diabetes, a composite indicator of risky prescribing, achievement of recommended blood pressure targets for specific patient groups and anticoagulation prescribing in patients with atrial fibrillation. We are also randomising practices to a fifth, non-intervention control group to further assess Hawthorne effects. Outcomes will be assessed using routinely collected data extracted 1 year after randomisation. Economic modelling will estimate intervention cost-effectiveness. A process evaluation involving eight non-trial practices will examine intervention delivery, mechanisms of action and unintended consequences. ASPIRE will provide 'real-world' evidence about the effects, cost-effectiveness and delivery of adapted intervention packages targeting high impact recommendations. By implementing our adaptable intervention package across four distinct clinical topics, and using 'opt-out' recruitment, our findings will provide evidence of wider generalisability. ISRCTN91989345.

Analyzing Matrices of Meta-Analytic Correlations: Current Practices and Recommendations

ERIC Educational Resources Information Center

Sheng, Zitong; Kong, Wenmo; Cortina, Jose M.; Hou, Shuofei

2016-01-01

Researchers have become increasingly interested in conducting analyses on meta-analytic correlation matrices. Methodologists have provided guidance and recommended practices for the application of this technique. The purpose of this article is to review current practices regarding analyzing meta-analytic correlation matrices, to identify the gaps…

Using Signs to Facilitate Vocabulary in Children with Language Delays

ERIC Educational Resources Information Center

Lederer, Susan Hendler; Battaglia, Dana

2015-01-01

The purpose of this article is to explore recommended practices in choosing and using key word signs (i.e., simple single-word gestures for communication) to facilitate first spoken words in hearing children with language delays. Developmental, theoretical, and empirical supports for this practice are discussed. Practical recommendations for…

78 FR 16824 - Tobacco Product Manufacturing Practice; Establishment of a Public Docket

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-19

... recommendations for regulations on good manufacturing practice for tobacco products that were submitted to FDA by... performance of a tobacco product), packing, and storage of a tobacco product conform to current good... group of 13 tobacco companies submitted to FDA: (1) Recommendations for good manufacturing practice...

Recommendations for Practice: Justifying Claims of Generalizability

ERIC Educational Resources Information Center

Hedges, Larry V.

2013-01-01

Recommendations for practice are routinely included in articles that report educational research. Robinson et al. suggest that reports of primary research should not routinely do so. They argue that single primary research studies seldom have sufficient external validity to support claims about practice policy. In this article, I draw on recent…

Narcolepsy and its treatment with stimulants. ASDA standards of practice.

PubMed

Mitler, M M; Aldrich, M S; Koob, G F; Zarcone, V P

1994-06-01

This review is part of the standards of practice recommendations. It has been commended and reviewed by the Board of the ASDA. It reflects recommendations of the Board for the practice of sleep medicine in North America. The subcommittee is responsible for the presented write-up.

Integrating Technical Communication in the Mechanical Engineering Curriculum

NASA Astrophysics Data System (ADS)

Norberg, Seth; Ashcraft, Timothy; van Poppel, Bret

2017-11-01

Technical communication is essential to engineering practice, but these skills can be challenging to teach and assess in the classroom. Instructors in the Mechanical Engineering (ME) program at the United States Military Academy are developing new learning exercises to prepare students for success in their capstone design course and beyond. In this paper we highlight the recent successes and lessons learned from two courses: junior-level Thermal-Fluid Systems and the senior-level ME Seminar. Both courses support the newly implemented West Point Writing Program (WPWP), an institutional, writing-across-the-curriculum program. The junior course incorporates four hands-on experiments, which provide an abundance of data for students to analyze, assess, and present. In the senior course the majority of the content that students present is from their ongoing capstone design projects. Between the two courses, students craft essays, lab reports, short summaries, posters, quad charts, and technical presentations. Both courses include peer evaluation, revision exercises, and timed (on demand) writing assignments. The junior course includes assignments co-authored by a group as well as an individual report. An overview of both courses' assignments with course-end feedback from the students and the faculty is provided. Strengths and weaknesses are identified and recommendations for instructors seeking to implement similar technical communications assignments in their own courses are presented.

Older Adult Consumer Knowledge, Attitudes, and Self-Reported Storage Practices of Ready-to-Eat Food Products and Risks Associated with Listeriosis.

PubMed

Evans, Ellen W; Redmond, Elizabeth C

2016-02-01

Consumer implementation of recommended food safety practices, specifically relating to time and temperature control of ready-to-eat (RTE) food products associated with listeriosis are crucial. This is particularly the case for at-risk consumers such as older adults, given the increased listeriosis incidence reported internationally among adults aged ≥60 years. However, data detailing older adults' cognitive risk factors associated with listeriosis are lacking. Combining data about knowledge, self-reported practices, and attitudes can achieve a cumulative multilayered in-depth understanding of consumer food safety behavior and cognition. This study aims to ascertain older adults' cognition and behavior in relation to domestic food handling and storage practices that may increase the risks associated with L. monocytogenes. Older adults (≥60 years) (n = 100) participated in an interview and questionnaire to determine knowledge, self-reported practices, and attitudes toward recommended practices. Although the majority (79%) had positive attitudes toward refrigeration, 84% were unaware of recommended temperatures (5°C) and 65% self-reported "never" checking their refrigerator temperature. Although most (72%) knew that "use-by" dates indicate food safety and 62% reported "always" taking note, neutral attitudes were held, with 67% believing it was safe to eat food beyond use-by dates and 57% reporting doing so. Attitudes toward consuming foods within the recommended 2 days of opening were neutral, with 55% aware of recommendations and , 84% reporting that they consume RTE foods beyond recommendations. Although knowledgeable of some key practices, older adults self-reported potentially unsafe practices when storing RTE foods at home, which may increase risks associated with L. monocytogenes. This study has determined that older adults' food safety cognition may affect their behaviors; understanding consumer food safety cognition is essential for developing targeted food safety education.

Photodynamic Therapy: Occupational Hazards and Preventative Recommendations for Clinical Administration by Healthcare Providers

PubMed Central

Lacey, Steven E.; Vesper, Benjamin J.; Paradise, William A.; Radosevich, James A.; Colvard, Michael D.

2013-01-01

Abstract Objective: Photodynamic therapy (PDT) as a medical treatment for cancers is an increasing practice in clinical settings, as new photosensitizing chemicals and light source technologies are developed and applied. PDT involves dosing patients with photosensitizing drugs, and then exposing them to light using a directed energy device in order to manifest a therapeutic effect. Healthcare professionals providing PDT should be aware of potential occupational health and safety hazards posed by these treatment devices and photosensitizing agents administered to patients. Materials and methods: Here we outline and identify pertinent health and safety considerations to be taken by healthcare staff during PDT procedures. Results: Physical hazards (for example, non-ionizing radiation generated by the light-emitting device, with potential for skin and eye exposure) and chemical hazards (including the photosensitizing agents administered to patients that have the potential for exposure via skin, subcutaneous, ingestion, or inhalation routes) must be considered for safe use of PDT by the healthcare professional. Conclusions: Engineering, administrative, and personal protective equipment controls are recommendations for the safe use and handling of PDT agents and light-emitting technologies. PMID:23859750

Improving System Engineering Excellence at NASA's Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

Takada, Pamela Wallace; Newton, Steve; Gholston, Sampson; Thomas, Dale (Technical Monitor)

2001-01-01

NASA's Marshall Space Flight Center (MSFC) management feels that sound system engineering practices are essential for successful project management, NASA studies have concluded that recent project failures could be attributed in part to inadequate systems engineering. A recent survey of MSFC project managers and system engineers' resulted in the recognition of a need for training in Systems Engineering Practices, particularly as they relate to MSFC projects. In response to this survey, an internal pilot short-course was developed to reinforce accepted practices for system engineering at MSFC. The desire of the MSFC management is to begin with in-house training and offer additional educational opportunities to reinforce sound system engineering principles to the more than 800 professionals who are involved with system engineering and project management. A Systems Engineering Development Plan (SEDP) has been developed to address the longer-term systems engineering development needs of MSFC. This paper describes the survey conducted and the training course that was developed in response to that survey.

North American Spine Society

MedlinePlus

... Articles Policy & Regulation Centers for Medicare & Medicaid Service Food & Drug Administration Scientific & Policy Comments Coverage Recommendations About Coverage Recommendations Access eBook Payor Access Practice Management Market Your Practice Career Center Spine Fellowship Directory ...

[Hygiene in endoscopy in clinic and practice 2013 in comparison with 2003--structure and process quality].

PubMed

Jager, E; Hausemann, A; Hofmann, H; Otto, U; Heudorf, U

2014-12-01

Endoscopy is an important part of modern medical diagnostics and therapy. The invasive procedures are however associated with a risk to transmit infections. Against this background the KRINKO has published the "Hygienic requirements for the reprocessing of flexible endoscopes and endoscopic accessories" in 2002 and has updated these recommendations in 2012. In 2003 and 2013 all gastroenterological facilities in Frankfurt am Main using flexible endoscopes were monitored for compliance with the recommendations. The inspections were performed after prior notice by a staff member of the health authority using a checklist which had been developed on the basis of the current KRINKO recommendations. In both years all institutions performing endoscopic procedures were visited: 2003 15 hospitals and 23 practices; 2013 14 clinics and 10 practices. In 2013 (data for 2003 in brackets) 100 % (93 %) of the hospitals and 60 % (22 %) of practices reprocessed their endoscopes by automated methods. The appropriate reprocessing and filling of water bottles for rinsing the scope channels with sterile water and the sterilisation of accessories were satisfactorily performed in 2003 and 2013 by all hospitals. However in 2013 only 90 % (2003: 74 %) of the practices correctly reprocessed water bottles and 80 % (52 %) used sterile water for filling the bottle. In 2013 100 % (2003: 57 %) of the practices correctly sterilised accessory instruments, while 2 practices used disposable, i. e., single-use materials. In 2013 all institutions performed microbiological tests according to KRINKO recommendations, while in 2003 all hospitals but only 43 % of the practices could present such tests. While the gastroenterological departments of Frankfurt hospitals already complied with the KRINKO recommendations in 2003, the inspection of several practices in 2003 had revealed considerable shortcomings in the implementation of these recommendations. Subsequently the practices have improved their hygiene management. © Georg Thieme Verlag KG Stuttgart · New York.

Alternative Fuels Data Center: Vehicle Maintenance to Conserve Fuel

Science.gov Websites

to the tire specifications provided by the manufacturer. Recommended Motor Oil Using the manufacturer's recommended grade of motor oil in an engine can improve fuel economy by 1%-2%. Check your owner's manual for the manufacturer's recommended grade of motor oil. Also, you may select motor oil that

Materials technology assessment for stirling engines

NASA Technical Reports Server (NTRS)

Stephens, J. R.; Witzke, W. R.; Watson, G. K.; Johnston, J. R.; Croft, W. J.

1977-01-01

A materials technology assessment of high temperature components in the improved (metal) and advanced (ceramic) Stirling engines was undertaken to evaluate the current state-of-the-art of metals and ceramics, identify materials research and development required to support the development of automotive Stirling engines, and to recommend materials technology programs to assure material readiness concurrent with engine system development programs. The most critical component for each engine is identified and some of the material problem areas are discussed.

Update - Concept of Operations for Integrated Model-Centric Engineering at JPL

NASA Technical Reports Server (NTRS)

Bayer, Todd J.; Bennett, Matthew; Delp, Christopher L.; Dvorak, Daniel; Jenkins, Steven J.; Mandutianu, Sanda

2011-01-01

The increasingly ambitious requirements levied on JPL's space science missions, and the development pace of such missions, challenge our current engineering practices. All the engineering disciplines face this growth in complexity to some degree, but the challenges are greatest in systems engineering where numerous competing interests must be reconciled and where complex system level interactions must be identified and managed. Undesired system-level interactions are increasingly a major risk factor that cannot be reliably exposed by testing, and natural-language single-viewpoint specifications areinadequate to capture and expose system level interactions and characteristics. Systems engineering practices must improve to meet these challenges, and the most promising approach today is the movement toward a more integrated and model-centric approach to mission conception, design, implementation and operations. This approach elevates engineering models to a principal role in systems engineering, gradually replacing traditional document centric engineering practices.

Why Practice Recommendations Are Important in Use-Inspired Basic Research and Why Too Much Caution Is Dysfunctional

ERIC Educational Resources Information Center

Renkl, Alexander

2013-01-01

Robinson et al. ("Educ Psychol Rev" 25:291-302, 2013) have suggested refraining from practice and policy recommendations in primary educational research articles, in particular because primary research journals are not the appropriate outlet for such recommendations, the evidence provided by one research article is usually not…

Stem cell applications and tissue engineering approaches in surgical practice.

PubMed

Khan, Wasim S; Malik, Atif A; Hardingham, Timothy E

2009-04-01

There has been an increasing interest in stem cell applications and tissue engineering approaches in surgical practice to deal with damaged or lost tissue. Although there have been developments in almost all surgical disciplines, the greatest advances are being made in orthopaedics, especially in bone repair. Significant hurdles however remain to be overcome before tissue engineering becomes more routinely used in surgical practice.

Transforming System Engineering through Model-Centric Engineering

DTIC Science & Technology

2015-11-18

best practices and provide computational technologies for real-time training within digital engineering environments  Multidisciplinary System...MBSE well due to continued training and practicing . While MBSE is a part of the MCE it does not encompass the full idea and enabling technologies of... practices against other Industry contractors and it was believed that ABC was trailing the others in the use of MDAO capabilities. They decided that

Which Techno-Mathematical Literacies Are Essential for Future Engineers?

ERIC Educational Resources Information Center

van der Wal, Nathalie J.; Bakker, Arthur; Drijvers, Paul

2017-01-01

Due to increased use of technology, the workplace practices of engineers have changed. So-called techno-mathematical literacies (TmL) are necessary for engineers of the 21st century. Because it is still unknown which TmL engineers actually use in their professional practices, the purpose of this study was to identify these TmL. Fourteen…

Occupational contact dermatitis in Australia: diagnostic and management practices, and severity of worker impairment.

PubMed

Keegel, Tessa; Erbas, Bircan; Cahill, Jennifer; Noonan, Amanda; Dharmage, Shyamali; Nixon, Rosemary

2007-06-01

The aims of this study were to compare treatment and referral practices between general practitioners (GPs) and dermatologists and to evaluate predictors for occupational contact dermatitis (OCD) disease severity measured in terms of worker impairment. Data were collected from 181 patients recruited for a larger study of OCD. Information about treatment recommendations and usual referral practices are reported for 123 patients. Data from patients, diagnosed with work-related skin disease, were modelled for severity of worker impairment. GPs were more likely to treat a patient independently, referring if the patient did not improve, whereas dermatologists were more likely to refer for patch testing on initial presentation. Dermatologists were more likely to recommend gloves and GPs were more likely to recommend soap avoidance/substitution. 2 GPs and no dermatologists reported recommending the best practice combination of moisturizers, topical corticosteroids and soap substitutes. When adjusted for all variables including age, sex, duration and diagnostic subgroup, workers with atopy as a cofactor had the most severe impairment. This study suggests that in Australia, patients with suspected OCD are initially managed within general practice, few clinicians recommend best practice treatments for OCD, and that atopy is associated with severity. These findings have implications for health resource allocation, clinician education, and the pre-employment counselling of atopic patients.

Rail Safety/Equipment Crashworthiness : Volume 3. Proposed Engineering Standards.

DOT National Transportation Integrated Search

1978-07-01

The document, the third of four volumes, contains recommended Engineering Standards prepared in the format of the standards published in the Code of Federal Regulations (Title 49, Transportation, Parts 200). The standards proposed provide improved oc...

Fluid therapy in neurointensive care patients: ESICM consensus and clinical practice recommendations.

PubMed

Oddo, Mauro; Poole, Daniele; Helbok, Raimund; Meyfroidt, Geert; Stocchetti, Nino; Bouzat, Pierre; Cecconi, Maurizio; Geeraerts, Thomas; Martin-Loeches, Ignacio; Quintard, Hervé; Taccone, Fabio Silvio; Geocadin, Romergryko G; Hemphill, Claude; Ichai, Carole; Menon, David; Payen, Jean-François; Perner, Anders; Smith, Martin; Suarez, José; Videtta, Walter; Zanier, Elisa R; Citerio, Giuseppe

2018-04-01

To report the ESICM consensus and clinical practice recommendations on fluid therapy in neurointensive care patients. A consensus committee comprising 22 international experts met in October 2016 during ESICM LIVES2016. Teleconferences and electronic-based discussions between the members of the committee subsequently served to discuss and develop the consensus process. Population, intervention, comparison, and outcomes (PICO) questions were reviewed and updated as needed, and evidence profiles generated. The consensus focused on three main topics: (1) general fluid resuscitation and maintenance in neurointensive care patients, (2) hyperosmolar fluids for intracranial pressure control, (3) fluid management in delayed cerebral ischemia after subarachnoid haemorrhage. After an extensive literature search, the principles of the Grading of Recommendations Assessment, Development and Evaluation (GRADE) system were applied to assess the quality of evidence (from high to very low), to formulate treatment recommendations as strong or weak, and to issue best practice statements when applicable. A modified Delphi process based on the integration of evidence provided by the literature and expert opinions-using a sequential approach to avoid biases and misinterpretations-was used to generate the final consensus statement. The final consensus comprises a total of 32 statements, including 13 strong recommendations and 17 weak recommendations. No recommendations were provided for two statements. We present a consensus statement and clinical practice recommendations on fluid therapy for neurointensive care patients.

49 CFR 192.65 - Transportation of pipe.

Code of Federal Regulations, 2014 CFR

2014-10-01

... railroad unless: (1) The transportation is performed in accordance with API Recommended Practice 5L1... performed in accordance with API Recommended Practice 5LW (incorporated by reference, see § 192.7). [Amdt...

49 CFR 192.65 - Transportation of pipe.

Code of Federal Regulations, 2013 CFR

2013-10-01

... railroad unless: (1) The transportation is performed in accordance with API Recommended Practice 5L1... performed in accordance with API Recommended Practice 5LW (incorporated by reference, see § 192.7). [Amdt...

49 CFR 192.65 - Transportation of pipe.

Code of Federal Regulations, 2012 CFR

2012-10-01

... railroad unless: (1) The transportation is performed in accordance with API Recommended Practice 5L1... performed in accordance with API Recommended Practice 5LW (incorporated by reference, see § 192.7). [Amdt...

49 CFR 192.65 - Transportation of pipe.

Code of Federal Regulations, 2011 CFR

2011-10-01

... railroad unless: (1) The transportation is performed in accordance with API Recommended Practice 5L1... performed in accordance with API Recommended Practice 5LW (incorporated by reference, see § 192.7). [Amdt...

Research and recommendations for a statewide sign retroreflectivity maintenance program.

DOT National Transportation Integrated Search

2012-04-01

This study evaluated TxDOT's current sign retroreflectivity maintenance practices, assessed their : effectiveness, and recommended statewide sign retroreflectivity maintenance practices that could be easily : and effectively implemented to ensure tha...

2016 AHA/ACC Guideline on the Management of Patients With Lower Extremity Peripheral Artery Disease: Executive Summary

PubMed Central

Gerhard-Herman, Marie D.; Gornik, Heather L.; Barrett, Coletta; Barshes, Neal R.; Corriere, Matthew A.; Drachman, Douglas E.; Fleisher, Lee A.; Fowkes, Francis Gerry R.; Hamburg, Naomi M.; Kinlay, Scott; Lookstein, Robert; Misra, Sanjay; Mureebe, Leila; Olin, Jeffrey W.; Patel, Rajan A.G.; Regensteiner, Judith G.; Schanzer, Andres; Shishehbor, Mehdi H.; Stewart, Kerry J.; Treat-Jacobson, Diane; Walsh, M. Eileen; Halperin, Jonathan L.

2017-01-01

Preamble Since 1980, the American College of Cardiology (ACC) and American Heart Association (AHA) have translated scientific evidence into clinical practice guidelines with recommendations to improve cardiovascular health. These guidelines, based on systematic methods to evaluate and classify evidence, provide a cornerstone of quality cardiovascular care. In response to reports from the Institute of Medicine1,2 and a mandate to evaluate new knowledge and maintain relevance at the point of care, the ACC/AHA Task Force on Clinical Practice Guidelines (Task Force) modified its methodology.3–5 The relationships among guidelines, data standards, appropriate use criteria, and performance measures are addressed elsewhere.5 Intended Use Practice guidelines provide recommendations applicable to patients with or at risk of developing cardiovascular disease. The focus is on medical practice in the United States, but guidelines developed in collaboration with other organizations may have a broader target. Although guidelines may be used to inform regulatory or payer decisions, the intent is to improve quality of care and align with patients' interests. Guidelines are intended to define practices meeting the needs of patients in most, but not all, circumstances, and should not replace clinical judgment. Guidelines are reviewed annually by the Task Force and are official policy of the ACC and AHA. Each guideline is considered current until it is updated, revised, or superseded by published addenda, statements of clarification, focused updates, or revised full-text guidelines. To ensure that guidelines remain current, new data are reviewed biannually to determine whether recommendations should be modified. In general, full revisions are posted in 5-year cycles.3–6 Modernization Processes have evolved to support the evolution of guidelines as “living documents” that can be dynamically updated. This process delineates a recommendation to address a specific clinical question, followed by concise text (ideally <250 words) and hyperlinked to supportive evidence. This approach accommodates time constraints on busy clinicians and facilitates easier access to recommendations via electronic search engines and other evolving technology. Evidence Review Writing committee members review the literature; weigh the quality of evidence for or against particular tests, treatments, or procedures; and estimate expected health outcomes. In developing recommendations, the writing committee uses evidence-based methodologies that are based on all available data.3–7 Literature searches focus on randomized controlled trials (RCTs) but also include registries, nonrandomized comparative and descriptive studies, case series, cohort studies, systematic reviews, and expert opinion. Only selected references are cited. The Task Force recognizes the need for objective, independent Evidence Review Committees (ERCs) that include methodologists, epidemiologists, clinicians, and biostatisticians who systematically survey, abstract, and assess the evidence to address systematic review questions posed in the PICOTS format (P=population, I=intervention, C=comparator, O=outcome, T=timing, S=setting).2,4–6 Practical considerations, including time and resource constraints, limit the ERCs to evidence that is relevant to key clinical questions and lends itself to systematic review and analysis that could affect the strength of corresponding recommendations. Guideline-Directed Management and Treatment The term “guideline-directed management and therapy” (GDMT) refers to care defined mainly by ACC/AHA Class I recommendations. For these and all recommended drug treatment regimens, the reader should confirm dosage with product insert material and carefully evaluate for contraindications and interactions. Recommendations are limited to treatments, drugs, and devices approved for clinical use in the United States. Class of Recommendation and Level of Evidence The Class of Recommendation (COR; ie, the strength of the recommendation) encompasses the anticipated magnitude and certainty of benefit in proportion to risk. The Level of Evidence (LOE) rates evidence supporting the effect of the intervention on the basis of the type, quality, quantity, and consistency of data from clinical trials and other reports (Table 1).3–5 Unless otherwise stated, recommendations are sequenced by COR and then by LOE. Where comparative data exist, preferred strategies take precedence. When >1 drug, strategy, or therapy exists within the same COR and LOE and no comparative data are available, options are listed alphabetically. Relationships With Industry and Other Entities The ACC and AHA sponsor the guidelines without commercial support, and members volunteer their time. The Task Force zealously avoids actual, potential, or perceived conflicts of interest that might arise through relationships with industry or other entities (RWI). All writing committee members and reviewers are required to disclose current industry relationships or personal interests, from 12 months before initiation of the writing effort. Management of RWI involves selecting a balanced writing committee and assuring that the chair and a majority of committee members have no relevant RWI (Appendix 1). Members are restricted with regard to writing or voting on sections to which their RWI apply. For transparency, members' comprehensive disclosure information is available online. Comprehensive disclosure information for the Task Force is also available online. The Task Force strives to avoid bias by selecting experts from a broad array of backgrounds representing different geographic regions, sexes, ethnicities, intellectual perspectives/biases, and scopes of clinical practice, and by inviting organizations and professional societies with related interests and expertise to participate as partners or collaborators. Individualizing Care in Patients With Associated Conditions and Comorbidities Managing patients with multiple conditions can be complex, especially when recommendations applicable to coexisting illnesses are discordant or interacting.8 The guidelines are intended to define practices meeting the needs of patients in most, but not all, circumstances. The recommendations should not replace clinical judgment. Clinical Implementation Management in accordance with guideline recommendations is effective only when followed. Adherence to recommendations can be enhanced by shared decision making between clinicians and patients, with patient engagement in selecting interventions on the basis of individual values, preferences, and associated conditions and comorbidities. Consequently, circumstances may arise in which deviations from these guidelines are appropriate. The reader is encouraged to consult the full-text guideline9 for additional guidance and details with regard to lower extremity peripheral artery disease (PAD) because the executive summary contains limited information. PMID:27840332

Social media networking: YouTube and search engine optimization.

PubMed

Jackson, Rem; Schneider, Andrew; Baum, Neil

2011-01-01

This is the third part of a three-part article on social media networking. This installment will focus on YouTube and search engine optimization. This article will explore the application of YouTube to the medical practice and how YouTube can help a practice retain its existing patients and attract new patients to the practice. The article will also describe the importance of search engine optimization and how to make your content appear on the first page of the search engines such as Google, Yahoo, and YouTube.

Format guidelines to make them vivid, intuitive, and visual: use simple formatting rules to optimize usability and accessibility of clinical practice guidelines.

PubMed

Versloot, Judith; Grudniewicz, Agnes; Chatterjee, Ananda; Hayden, Leigh; Kastner, Monika; Bhattacharyya, Onil

2015-06-01

We present simple formatting rules derived from an extensive literature review that can improve the format of clinical practice guidelines (CPGs), and potentially increase the likelihood of being used. We recently conducted a review of the literature from medicine, psychology, design, and human factors engineering on characteristics of guidelines that are associated with their use in practice, covering both the creation and communication of content. The formatting rules described in this article are derived from that review. The formatting rules are grouped into three categories that can be easily applied to CPGs: first, Vivid: make it stand out; second, Intuitive: match it to the audience's expectations, and third, Visual: use alternatives to text. We highlight rules supported by our broad literature review and provide specific 'how to' recommendations for individuals and groups developing evidence-based materials for clinicians. The way text documents are formatted influences their accessibility and usability. Optimizing the formatting of CPGs is a relatively inexpensive intervention and can be used to facilitate the dissemination of evidence in healthcare. Applying simple formatting principles to make documents more vivid, intuitive, and visual is a practical approach that has the potential to influence the usability of guidelines and to influence the extent to which guidelines are read, remembered, and used in practice.

Interactive physics apparatus: influence on interest of secondary school students in pursuing a career path in science, technology, engineering and mathematics (STEM)

NASA Astrophysics Data System (ADS)

Lubrica, Joel V.; Abiasen, Jovalson T.; Dolipas, Bretel B.; Ramos, Jennifer Lyn S.

2017-01-01

In this article, we present results of our endeavours as physics educators to facilitate and support pedagogical change and development in the educational system of a developing country, the Philippines. We have discovered that the interaction of junior high school (years 7-10) students with physics apparatus can influence students’ interest in pursuing a career in science, technology, engineering and mathematics (STEM). This assertion stems from self-reports of students who gave their views immediately after their exposure to interactive apparatus in their own school, outside of their usual lessons. Participants claimed that their interest in following a STEM career path was ‘greatly increased’ due to their exposure to these apparatus. This was true even for students who were intending to take a non-STEM career path. Thus, we recommend that, in settings that have constraints involving access to practical equipment, ways to introduce school level interactive physics apparatus to secondary school students be conducted in order to attract more students towards STEM courses. Possibly, policies encouraging this type of exposure should also be formulated.

Design study of flat belt CVT for electric vehicles

NASA Technical Reports Server (NTRS)

Kumm, E. L.

1980-01-01

A continuously variable transmission (CVT) was studied, using a novel flat belt pulley arrangement which couples the high speed output shaft of an energy storage flywheel to the drive train of an electric vehicle. A specific CVT arrangement was recommended and its components were selected and sized, based on the design requirements of a 1700 KG vehicle. A design layout was prepared and engineering calculations made of component efficiencies and operating life. The transmission efficiency was calculated to be significantly over 90% with the expected vehicle operation. A design consistent with automotive practice for low future production costs was considered, together with maintainability. The technology advancements required to develop the flat belt CVT were identified and an estimate was made of how the size of the flat belt CVT scales to larger and smaller design output torques. The suitability of the flat belt CVT for alternate application to an electric vehicle powered by an electric motor without flywheel and to a hybrid electric vehicle powered by an electric motor with an internal combustion engine was studied.

Developing a Web-Based Advisory Expert System for Implementing Traffic Calming Strategies

PubMed Central

Falamarzi, Amir; Borhan, Muhamad Nazri; Rahmat, Riza Atiq O. K.

2014-01-01

Lack of traffic safety has become a serious issue in residential areas. In this paper, a web-based advisory expert system for the purpose of applying traffic calming strategies on residential streets is described because there currently lacks a structured framework for the implementation of such strategies. Developing an expert system can assist and advise engineers for dealing with traffic safety problems. This expert system is developed to fill the gap between the traffic safety experts and people who seek to employ traffic calming strategies including decision makers, engineers, and students. In order to build the expert system, examining sources related to traffic calming studies as well as interviewing with domain experts have been carried out. The system includes above 150 rules and 200 images for different types of measures. The system has three main functions including classifying traffic calming measures, prioritizing traffic calming strategies, and presenting solutions for different traffic safety problems. Verifying, validating processes, and comparing the system with similar works have shown that the system is consistent and acceptable for practical uses. Finally, some recommendations for improving the system are presented. PMID:25276861

Developing a web-based advisory expert system for implementing traffic calming strategies.

PubMed

Falamarzi, Amir; Borhan, Muhamad Nazri; Rahmat, Riza Atiq O K

2014-01-01

Lack of traffic safety has become a serious issue in residential areas. In this paper, a web-based advisory expert system for the purpose of applying traffic calming strategies on residential streets is described because there currently lacks a structured framework for the implementation of such strategies. Developing an expert system can assist and advise engineers for dealing with traffic safety problems. This expert system is developed to fill the gap between the traffic safety experts and people who seek to employ traffic calming strategies including decision makers, engineers, and students. In order to build the expert system, examining sources related to traffic calming studies as well as interviewing with domain experts have been carried out. The system includes above 150 rules and 200 images for different types of measures. The system has three main functions including classifying traffic calming measures, prioritizing traffic calming strategies, and presenting solutions for different traffic safety problems. Verifying, validating processes, and comparing the system with similar works have shown that the system is consistent and acceptable for practical uses. Finally, some recommendations for improving the system are presented.

Reducing commercial fishing deck hazards with engineering solutions for winch design.

PubMed

Lincoln, Jennifer M; Lucas, Devin L; McKibbin, Robert W; Woodward, Chelsea C; Bevan, John E

2008-01-01

The majority (67%) of hospitalized injuries among Alaska commercial fishermen are associated with deck machinery. This paper describes the "Prevention Through Design" process to mitigate one serious machinery entanglement hazard posed by a capstan deck winch. After observing that the capstan winch provides no entanglement protection and the hydraulic controls are usually out of reach of the entangled person, NIOSH personnel met with fishermen and winch manufacturers to discuss various design solutions to mitigate these hazards. An emergency-stop ("e-stop") system was developed that incorporated a momentary contact button that when pushed, switches a safety-relay that de-energizes the solenoid of an electro-hydraulic valve stopping the rotating winch. The vessel owners that had the e-stop installed enthusiastically recommend it to other fishermen. NIOSH entered into a Proprietary Technology Licensing Agreement with a company to develop the system for commercial use. This is an example of a practical engineering control that effectively protects workers from a hazardous piece of equipment by preventing injuries due to entanglement. This solution could reduce these types of debilitating injuries and fatalities in this industry.

Hardening parts by chrome plating in manufacture and repair

NASA Astrophysics Data System (ADS)

Astanin, V. K.; Pukhov, E. V.; Stekolnikov, Y. A.; Emtsev, V. V.; Golikova, O. A.

2018-03-01

In the engineering industry, galvanic coatings are widely used to prolong the service life of the machines, which contribute to the increase in the strength of the parts and their resistance to environmental influences, temperature and pressure drops, wear and fretting corrosion. Galvanic coatings have been widely applied in engineering, including agriculture, aircraft building, mining, construction, and electronics. The article focuses on the manufacturing methods of new agricultural machinery parts and the repair techniques of worn parts by chrome plating. The main attention is paid to the unstable methods of chromium deposition (in pulsed and reversing modes) in low-concentration electrolytes, which makes it possible to increase the reliability and durability of the hardened parts operation by changing the conditions of electrocrystallization, that is, directed formation of the structure and texture, thickness, roughness and microhardness of chromium plating. The practical recommendations are given on the current and temperature regimes of chromium deposition and composition of baths used for the restoration and hardening of the machine parts. Moreover, the basic methods of machining allowances removal are analysed.

Analysing the integration of engineering in science lessons with the Engineering-Infused Lesson Rubric

NASA Astrophysics Data System (ADS)

Peterman, Karen; Daugherty, Jenny L.; Custer, Rodney L.; Ross, Julia M.

2017-09-01

Science teachers are being called on to incorporate engineering practices into their classrooms. This study explores whether the Engineering-Infused Lesson Rubric, a new rubric designed to target best practices in engineering education, could be used to evaluate the extent to which engineering is infused into online science lessons. Eighty lessons were selected at random from three online repositories, and coded with the rubric. Overall results documented the strengths of existing lessons, as well as many components that teachers might strengthen. In addition, a subset of characteristics was found to distinguish lessons with the highest level of engineering infusion. Findings are discussed in relation to the potential of the rubric to help teachers use research evidence-informed practice generally, and in relation to the new content demands of the U.S. Next Generation Science Standards, in particular.

Elementary Education Program for Engineering by Dual System of Workshop and Teaching Program with Practical Subject

NASA Astrophysics Data System (ADS)

Hara, Toshitsugu

Elementary education program for engineering by the dual system combined with workshop program and teaching program with practical subject was discussed. The dual system which consists of several workshop programs and fundamental subjects (such as mathematics, English and physics) with practical material has been performed for the freshmen. The elementary workshop program (primary course) has four workshops and the related lectures. Fundamental subjects are taught with the practical or engineering texts. English subjects are taught by specified teachers who have ever worked in engineering field with English. The dual system was supported by such systems as the center for success initiative and the English education center.

Education for Professional Engineering Practice

ERIC Educational Resources Information Center

Bramhall, Mike D.; Short, Chris

2014-01-01

This paper reports on a funded collaborative large-scale curriculum innovation and enhancement project undertaken as part of a UK National Higher Education Science, Technology Engineering and Mathematics (STEM) programme. Its aim was to develop undergraduate curricula to teach appropriate skills for professional engineering practice more…

A Framework of Working Across Disciplines in Early Design and R&D of Large Complex Engineered Systems

NASA Technical Reports Server (NTRS)

McGowan, Anna-Maria Rivas; Papalambros, Panos Y.; Baker, Wayne E.

2015-01-01

This paper examines four primary methods of working across disciplines during R&D and early design of large-scale complex engineered systems such as aerospace systems. A conceptualized framework, called the Combining System Elements framework, is presented to delineate several aspects of cross-discipline and system integration practice. The framework is derived from a theoretical and empirical analysis of current work practices in actual operational settings and is informed by theories from organization science and engineering. The explanatory framework may be used by teams to clarify assumptions and associated work practices, which may reduce ambiguity in understanding diverse approaches to early systems research, development and design. The framework also highlights that very different engineering results may be obtained depending on work practices, even when the goals for the engineered system are the same.

Practical Education Support to Foster Engineers at Manufacturing and Engineering Design Center in Muroran Institute of Technology

NASA Astrophysics Data System (ADS)

Kazama, Toshiharu; Hanajima, Naohiko; Shimizu, Kazumichi; Satoh, Kohki

To foster engineers with creative power, Muroran Institute of Technology established Manufacturing and Engineering Design Center (MEDeC) that concentrates on Monozukuri. MEDeC consists of three project groups : i) Education Support Group provides educational support for practical training classes on and off campus and PDCA (plan-do-check-action) -conscious engineering design education related to Monozukuri ; ii) Fundamental Manufacturing Research Group carries out nurture research into fundamental and innovative technology of machining and manufacturing, and iii) Regional Cooperation Group coordinates the activities in cooperation with bureau, schools and industries in and around Muroran City. MEDeC has a fully integrated collection of machine tools and hand tools for manufacturing, an atelier, a tatara workplace, implements for measurement and related equipment designed for practically teaching state-of-the-practice manufacturing methods.

STP Position Paper: Recommended Practices for Sampling and Processing the Nervous System (Brain, Spinal Cord, Nerve, and Eye) during Nonclinical General Toxicity Studies

EPA Science Inventory

The Society of Toxicologic Pathology charged a Nervous System Sampling Working Group with devising recommended practices to routinely screen the central and peripheral nervous systems in Good Laboratory Practice-type nonclinical general toxicity studies. Brains should be trimmed ...

Management Practices of Soybean Producers in Marion County, Tennessee.

ERIC Educational Resources Information Center

Hall, William A.; And Others

The purposes of the study were to: (1) determine some major characteristics of Marion County soybean producers and their farms; (2) more accurately determine which recommended production practices soybean producers were using in 1968 and 1969; (3) study the relation between use of recommended production practices and yield levels; and (4) identify…

Recommended Feeding and Dietary Practices To Improve Infant and Maternal Nutrition.

ERIC Educational Resources Information Center

Academy for Educational Development, Washington, DC.

The LINKAGES Project is intended to improve breastfeeding and related complementary feeding and maternal dietary practices. The project, in consultation with technical experts and program managers, identified a set of recommended feeding and dietary practices intended to break the cycle of poor health and nutrition that passes from generation to…

Guideline harmonization and implementation plan for the BETTER trial: Building on Existing Tools to Improve Chronic Disease Prevention and Screening in Family Practice

PubMed Central

Rogers, Jess; Manca, Donna; Lang-Robertson, Kelly; Bell, Stephanie; Salvalaggio, Ginetta; Greiver, Michelle; Korownyk, Christina; Klein, Doug; Carroll, June C.; Kahan, Mel; Meuser, Jamie; Buchman, Sandy; Barrett, Rebekah M.; Grunfeld, Eva

2014-01-01

Background The aim of the Building on Existing Tools to Improve Chronic Disease Prevention and Screening in Family Practice (BETTER) randomized controlled trial is to improve the primary prevention of and screening for multiple conditions (diabetes, cardiovascular disease, cancer) and some of the associated lifestyle factors (tobacco use, alcohol overuse, poor nutrition, physical inactivity). In this article, we describe how we harmonized the evidence-based clinical practice guideline recommendations and patient tools to determine the content for the BETTER trial. Methods We identified clinical practice guidelines and tools through a structured literature search; we included both indexed and grey literature. From these guidelines, recommendations were extracted and integrated into knowledge products and outcome measures for use in the BETTER trial. End-users (family physicians, nurse practitioners, nurses and dieticians) were engaged in reviewing the recommendations and tools, as well as tailoring the content to the needs of the BETTER trial and family practice. Results In total, 3–5 high-quality guidelines were identified for each condition; from these, we identified high-grade recommendations for the prevention of and screening for chronic disease. The guideline recommendations were limited by conflicting recommendations, vague wording and different taxonomies for strength of recommendation. There was a lack of quality evidence for manoeuvres to improve the uptake of guidelines among patients with depression. We developed the BETTER clinical algorithms for the implementation plan. Although it was difficult to identify high-quality tools, 180 tools of interest were identified. Interpretation The intervention for the BETTER trial was built by integrating existing guidelines and tools, and working with end-users throughout the process to increase the intervention’s utility for practice. Trial registration: ISRCTN07170460 PMID:25077119

Best practices for team-based assistive technology design courses.

PubMed

Goldberg, Mary R; Pearlman, Jonathan L

2013-09-01

Team-based design courses focused on products for people with disabilities have become relatively common, in part because of training grants such as the NSF Research to Aid Persons with Disabilities course grants. An output from these courses is an annual description of courses and projects but has yet to be complied into a "best practices guide," though it could be helpful for instructors. To meet this need, we conducted a study to generate best practices for assistive technology product development courses and how to use these courses to teach students the fundamentals of innovation. A full list of recommendations is comprised in the manuscript and include identifying a client through a reliable clinical partner; allowing for transparency between the instructors, the client, and the team(s); establishing multi-disciplinary teams; using a process-oriented vs. solution-oriented product development model; using a project management software to facilitate and archive communication and outputs; facilitating client interaction through frequent communication; seeking to develop professional role confidence to inspire students' commitment to engineering and (where applicable) rehabilitation field; publishing student designs on repositories; incorporating both formal and informal education opportunities related to design; and encouraging students to submit their designs to local or national entrepreneurship competitions.

Engineering the fitness of older patients for chemotherapy: an exploration of Comprehensive Geriatric Assessment in practice.

PubMed

McCarthy, Alexandra L; Cook, Peta S; Yates, Patsy

2014-03-01

Clinicians often report that currently available methods to assess older patients, including standard clinical consultations, do not elicit the information necessary to make an appropriate cancer treatment recommendation for older cancer patients. An increasingly popular way of assessing the potential of older patients to cope with chemotherapy is a Comprehensive Geriatric Assessment. What constitutes Comprehensive Geriatric Assessment, however, is open to interpretation and varies from one setting to another. Furthermore, Comprehensive Geriatric Assessment's usefulness as a predictor of fitness for chemotherapy and as a determinant of actual treatment is not well understood. In this article, we analyse how Comprehensive Geriatric Assessment was developed for use in a large cancer service in an Australian capital city. Drawing upon Actor-Network Theory, our findings reveal how, during its development, Comprehensive Geriatric Assessment was made both a tool and a science. Furthermore, we briefly explore the tensions that we experienced as scholars who analyse medico-scientific practices and as practitioner-designers charged with improving the very tools we critique. Our study contributes towards geriatric oncology by scrutinising the medicalisation of ageing, unravelling the practices of standardisation and illuminating the multiplicity of 'fitness for chemotherapy'.

Faculty Recommendations for Web Tools: Implications for Course Management Systems

ERIC Educational Resources Information Center

Oliver, Kevin; Moore, John

2008-01-01

A gap analysis of web tools in Engineering was undertaken as one part of the Digital Library Network for Engineering and Technology (DLNET) grant funded by NSF (DUE-0085849). DLNET represents a Web portal and an online review process to archive quality knowledge objects in Engineering and Technology disciplines. The gap analysis coincided with the…

Ceramics potential in automotive powerplants

NASA Technical Reports Server (NTRS)

Mclean, A. F.

1983-01-01

The paper addresses the potential that ceramic materials can play an important role in future automotive powerplants - both advanced heat engines and advanced battery systems. A number of related experimental programs are reviewed including ceramics for gasoline and diesel piston engines, gas turbine and Stirling Engines and sodium-sulfur batteries. A strong integrated program to develop ceramics technology is recommended.

40 CFR 1036.610 - Innovative technology credits and adjustments for reducing greenhouse gas emissions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... and the in-use emission rate without the technology. Multiply this difference by the number of engines... HEAVY-DUTY HIGHWAY ENGINES Special Compliance Provisions § 1036.610 Innovative technology credits and... judgment. We recommend that you base your credit/adjustment on A to B testing of pairs of engines/vehicles...

40 CFR 1036.610 - Innovative technology credits and adjustments for reducing greenhouse gas emissions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... and the in-use emission rate without the technology. Multiply this difference by the number of engines... HEAVY-DUTY HIGHWAY ENGINES Special Compliance Provisions § 1036.610 Innovative technology credits and... judgment. We recommend that you base your credit/adjustment on A to B testing of pairs of engines/vehicles...

40 CFR 1036.610 - Innovative technology credits and adjustments for reducing greenhouse gas emissions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... and the in-use emission rate without the technology. Multiply this difference by the number of engines... HEAVY-DUTY HIGHWAY ENGINES Special Compliance Provisions § 1036.610 Innovative technology credits and... judgment. We recommend that you base your credit/adjustment on A to B testing of pairs of engines/vehicles...

40 CFR 80.571 - What labeling requirements apply to retailers and wholesale purchaser-consumers of NRLM diesel...

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Required for use in all model year 2011 and newer nonroad diesel engines. Recommended for use in all nonroad, locomotive, and marine diesel engines. WARNING Federal Law prohibits use in highway vehicles or engines. (b) From June 1, 2007, through September 30, 2010, for pumps dispensing NRLM diesel fuel meeting...

40 CFR 80.571 - What labeling requirements apply to retailers and wholesale purchaser-consumers of NRLM diesel...

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Required for use in all model year 2011 and newer nonroad diesel engines. Recommended for use in all nonroad, locomotive, and marine diesel engines. WARNING Federal Law prohibits use in highway vehicles or engines. (b) From June 1, 2007, through September 30, 2010, for pumps dispensing NRLM diesel fuel meeting...

40 CFR 80.571 - What labeling requirements apply to retailers and wholesale purchaser-consumers of NRLM diesel...

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Required for use in all model year 2011 and newer nonroad diesel engines. Recommended for use in all nonroad, locomotive, and marine diesel engines. WARNING Federal Law prohibits use in highway vehicles or engines. (b) From June 1, 2007, through September 30, 2010, for pumps dispensing NRLM diesel fuel meeting...

40 CFR 80.571 - What labeling requirements apply to retailers and wholesale purchaser-consumers of NRLM diesel...

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Required for use in all model year 2011 and newer nonroad diesel engines. Recommended for use in all nonroad, locomotive, and marine diesel engines. WARNING Federal Law prohibits use in highway vehicles or engines. (b) From June 1, 2007, through September 30, 2010, for pumps dispensing NRLM diesel fuel meeting...