Leveraging Leadership for Better Business: A Look at Civil Engineering in the Air Force
1999-12-05
What does it all mean ?" CE Quarterly Magazine article dated Winter 98 - "The Air Force Civil Engineer...Future" CE Quarterly Magazine article dated Winter 98 - "Civil Engineering Outsourcing: What does it all mean ?" CE Quarterly Magazine article dated...Engineering Outsourcing: What does it all mean ?" CE Quarterly Magazine article dated Winter 98 - "The Air Force Civil Engineer
Characterization engineering status report october 1998 - december 1998
DOE Office of Scientific and Technical Information (OSTI.GOV)
BOGER, R.M.
1999-05-13
Characterization Engineering (CE) continues to make progress in support of the project goal of characterizing the Hanford high-level waste tanks. Two core sampling systems were operational during this reporting period-push mode core sampling system No. 1 and rotary mode core sampling system No. 4. The availability average for core sampling systems No. 1 , No. 3 and No. 4, combined, was 45 percent, down from 79percent for the previous quarter and 58 percent for FY 1998. System No. 2 did not have scope during the quarter, and availability was not hacked. System No. 3 was out of service the entiremore » quarter for corrective maintenance. Two tanks were core sampled during the reporting period, and 24 samples were retrieved. Core sample recovery increased slightly during the quarter. System No. 1 average sample recovery increased from 80percent to 81 percent, The rotary mode core sampling average recovery increased to 62 percent from 55 percent for the previous quarter. sampling six tanks, one more than scheduled. Vapor Sampling was utilized in support of the sluicing of tank 241-C-106 and for emissions monitoring of three exhaust stacks. Increased support was provided for Vapor Sampling the Standard Hydrogen Monitoring Systems. The sampling was necessary due to freezing problems with the field-installed systems. Preparations are continuing for the Light-Duty Utility Arm (LDUA) deployment with configuration and minor hardware upgrades. The LDUA Operational Readiness Review continues. The oversight of the Nested, Fixed-Depth Sampler system development has started to increase in order to ensure that a usable system is received when the project is completed. To improve configuration control, 92 drawing sheet revisions were completed along with the generation of nine new drawing sheets. The number of outstanding Engineering Change Notices increased slightly because of the addition of more drawings into the project. continues to develop. Organizational responsibilities are being identified and documented as well as the scope and deliverables. Finishing Plant was completed, and the final reviews to authorize starting work have begun. Significant progress was made in other areas as well. Grab Sampling completed The stewardship of the Long Length Contaminated Equipment Removal equipment The engineering and work planning for opening tank 241-2361 at the Plutonium.« less
NASA Technical Reports Server (NTRS)
Cohen, Lester M.
2015-01-01
The design, engineering tests of the PMSAs PMBSS show that we have a robust system that not only meets but exceeds (better than) the design requirements for these components. In the next 2 years the Telescope Observatory will be subjected to a simulated launch environment (sine vibeacoustics) and operations tests at cryogenic temperatures. Launch is schedule for the last quarter of 2018.
Lunar surface vehicle model competition
NASA Technical Reports Server (NTRS)
1990-01-01
During Fall and Winter quarters, Georgia Tech's School of Mechanical Engineering students designed machines and devices related to Lunar Base construction tasks. These include joint projects with Textile Engineering students. Topics studied included lunar environment simulator via drop tower technology, lunar rated fasteners, lunar habitat shelter, design of a lunar surface trenching machine, lunar support system, lunar worksite illumination (daytime), lunar regolith bagging system, sunlight diffusing tent for lunar worksite, service apparatus for lunar launch vehicles, lunar communication/power cables and teleoperated deployment machine, lunar regolith bag collection and emplacement device, soil stabilization mat for lunar launch/landing site, lunar rated fastening systems for robotic implementation, lunar surface cable/conduit and automated deployment system, lunar regolith bagging system, and lunar rated fasteners and fastening systems. A special topics team of five Spring quarter students designed and constructed a remotely controlled crane implement for the SKITTER model.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Crawford, C.
2015-09-30
This report details the chemical and radionuclide contaminant results for the characterization of the Calendar Year (CY) 2014 Fourth Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC) in effect at that time. Information from this characterization will be used by DWPF & Saltstone Facility Engineering (DSFE) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System.
Automotive Stirling engine development program
NASA Technical Reports Server (NTRS)
Ernst, W.; Richey, A.; Farrell, R.; Riecke, G.; Smith, G.; Howarth, R.; Cronin, M.; Simetkosky, M.; Meacher, J.
1986-01-01
This is the ninth Semiannual Technical Progress Report prepared under the Automotive Stirling Engine Development Program. It covers the twenty-eighth and twenty-ninth quarters of activity after award of the contract. Quarterly Technical Progress Reports related program activities from the first through the thirteenth quarters; thereafter, reporting was changed to a Semiannual format. This report summarizes the study of higher-power kinematic Stirling engines for transportation use, development testing of Mod I Stirling engines, and component development activities. Component development testing included successful conical fuel nozzle testing and functional checkout of Mod II controls and auxiliaries on Mod I engine test beds. Overall program philosophy is outlined and data and test results are presented.
6. Photographic copy of architectural elevations for Officers' Quarters "A" ...
6. Photographic copy of architectural elevations for Officers' Quarters "A" & "B": Taylor & Barnes, Architects & Engineers, 803 W. Third Street, Los Angeles California, O.C.E. Office of Civil Engineer Job No. Muroc ESA 210-48 and 210-49, Military Construction: Muroc Flight Test Base, Muroc, California, Warehouses and Additional Housing for Officers: Officers Quarters, Elevations & Details, Sheet No. 13 of 16, May 1945. Reproduced from the holdings of the National Archives, Pacific Southwest Region - Edwards Air Force Base, North Base, Officers' Quarters A, North Base Road, Boron, Kern County, CA
5. Photographic copy of architectural floor plans for Officers' Quarters ...
5. Photographic copy of architectural floor plans for Officers' Quarters "A" & "B": Taylor & Barnes, Architects & Engineers, 803 W. Third Street, Los Angeles California, O.C.E. Office of Civil Engineer Job No. Muroc ESA 210-48 and 210-49, Military Construction: Muroc Flight Test Base, Muroc, California, Warehouses and Additional Housing for Officers: Officers Quarters, Floor Plan, Foundation Plan & Details, Sheet No. 12 of 16, May 1945. Reproduced from the holdings of the National Archives, Pacific Southwest Region - Edwards Air Force Base, North Base, Officers' Quarters A, North Base Road, Boron, Kern County, CA
Line focus concentrating collector for Copper Mountain Ski Resort, Colorado (Engineering Materials)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1983-06-02
The present invention is a device which develops an accurate line focus concentrating collector by flexural bending of thin reflective materials. This method avoids the need for expensive tooling and support frame fabrication. The technical work conducted during this quarter included completion of designs for the prototype system for the Copper Mountain Ski Resort in Colorado. Evaluation of alternate tracking and drive systems and final design of the support system. These drawings accompany DOE/CS/15072--T4.
2005-01-01
bioengineering programs and activities of The Catholic University of America, Georgetown University, The George Washington University and Howard ... University . A prime component of WABME activities is a quarterly series of research workshops, which bring together problem-rich biomedical disciplines and
Review of Army Analysis. Volume 2. Appendixes C-M
1979-04-01
In most Army studies, the identifica-tion of new or changed alternatives occurs during the study de - spite efforts at early deflnition, Study...in time to support each major acquisition de -V..i cision milestone, Operational testing activities are similiarly timed, Thus, it frequently occurs...Engineer School i. Transportation School J. Quarter Master School k. Missile & Munition School 1. Intelligence School ! m. Signal School ii. Military
Building a Network to Support Girls and Women in Science, Technology, Engineering, and Mathematics
NASA Astrophysics Data System (ADS)
Spears, Jacqueline D.; Dyer, Ruth A.; Franks, Suzanne E.; Montelone, Beth A.
Women today constitute over half of the U.S. population and almost half of its overall workforce, yet they make up less than a quarter of the science and engineering workforce. Many historical and social factors contribute to this discrepancy, and numerous individual, institutional, and governmental attempts have been made to redress it. However, many of the efforts to promote, include, and engage girls and women in science, technology, engineering, and mathematics (STEM) education and professions have been made in isolation. At Kansas State University, the authors have begun a systemic effort to increase the participation of girls and women in STEM. This article describes the creation and initial activities of a network of partners that includes universities, school districts, corporations, governmental agencies, and nonprofit organizations, assembled under the aegis of a project supported by funding from the National Science Foundation.
Expedition 26 Crewmembers in sleeping quarters
2010-12-25
ISS026-E-012167 (25 Dec. 2010) --- Three of the six crew members aboard the International Space Station peek out of their sleeping quarters on Christmas morning to view the station’s decorations and gifts. Shown, from left, are European Space Agency astronaut Paolo Nespoli, Expedition 26 flight engineer, NASA astronaut Scott Kelly, Expedition 26 commander, and NASA astronaut Catherine (Cady) Coleman, flight engineer
Expedition 26 Crewmembers in sleeping quarters
2010-12-25
ISS026-E-012169 (25 Dec. 2010) --- Three of the six crew members aboard the International Space Station peek out of their sleeping quarters on Christmas morning to view the station?s decorations and gifts. Shown, from left, are European Space Agency astronaut Paolo Nespoli, Expedition 26 flight engineer, NASA astronaut Scott Kelly, Expedition 26 commander, and NASA astronaut Catherine (Cady) Coleman, flight engineer.
3. Photographic copy of architectural site plans for Officers' Quarters ...
3. Photographic copy of architectural site plans for Officers' Quarters "A" & "B" and Warehouses "A" & "B": Taylor & Barnes, Architects & Engineers, 803 W. Third Street, Los Angeles California, O.C.E. Office of Civil Engineer Job No. Muroc ESA 210-48 and 210-49, Military Construction: Muroc Flight Test Base, Muroc, California, Warehouses and Additional Housing for Officers: Location Plan, Grading & Paving, Sheet No. 2 of 16, May 1945. Reproduced from the holdings of the National Archives, Pacific Southwest Region - Edwards Air Force Base, North Base, Officers' Quarters A, North Base Road, Boron, Kern County, CA
ERIC Educational Resources Information Center
National Science Foundation, Washington, DC.
Statistical data concerning funds budgeted by 14 federal agencies for grants and contracts in science and engineering to institutions of higher education in fiscal year 1976 are compiled in this appendix of a report issued by the National Science Foundation. These funds provide an estimated 95 percent of all funds for scientific and engineering…
Photocopy of drawing (original drawing of Double N.C.O. Quarters in ...
Photocopy of drawing (original drawing of Double N.C.O. Quarters in possession of MacDill Air Force Base, Civil Engineering, Tampa, Florida; 1939 architectural drawings by Construction Division, Office of the Quartermaster General) INTERIOR DETAILS - MacDill Air Force Base, Double Non-Commissioned Officers' Quarters, 7418 Hanger Loop Drive, Tampa, Hillsborough County, FL
Photocopy of drawing (original drawing of Double N.C.O. Quarters in ...
Photocopy of drawing (original drawing of Double N.C.O. Quarters in possession of MacDill Air Force Base, Civil Engineering, Tampa, Florida; 1939 architectural drawings by Construction Division, Office of the Quartermaster General) ELEVATIONS AND SECTION - MacDill Air Force Base, Double Non-Commissioned Officers' Quarters, 7418 Hanger Loop Drive, Tampa, Hillsborough County, FL
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nguyen, Ba Nghiep; Simmons, Kevin L.
2013-12-02
This quarterly report summarizes the status of the project planning to obtain all the approvals required for a Cooperative Research and Development Agreement (CRADA) with Autodesk, Inc., Toyota Motor Engineering and Manufacturing North America (Toyota), and Magna Exterior and Interiors Corporation (Magna). The final CRADA documents processed by PNNL’s Legal Services were submitted to all the parties for signatures.
Joint Force Quarterly. Issue 77, 2nd Quarter 2015
2015-04-01
security required for storing or transfer- ring the data and whether the individual should be informed about potential uses of the data. It is also...decision relevance.7 The often repeated mantra in the social sciences, “correlation does not imply causation,” certainly rings true here. The popular...development of turbine jet engines by innovative scientists and engineers working with military personnel. The process involved nearly continuous insertion
Photocopy of drawing (original drawing of Double N.C.O. Quarters in ...
Photocopy of drawing (original drawing of Double N.C.O. Quarters in possession of MacDill Air Force Base, Civil Engineering, Tampa, Florida; 1939 architectural drawings by Construction Division, Office of the Quartermaster General) FIRST AND SECOND FLOOR PLANS - MacDill Air Force Base, Double Non-Commissioned Officers' Quarters, 7418 Hanger Loop Drive, Tampa, Hillsborough County, FL
DOE Office of Scientific and Technical Information (OSTI.GOV)
Crawford, C.
2016-02-18
This report details the chemical and radionuclide contaminant results for the characterization of the Calendar Year (CY) 2015 First, Second, and Third Quarter sampling of Tank 50H for the Saltstone Waste Acceptance Criteria (WAC) in effect at that time. Information from this characterization will be used by Defense Waste Processing Facility (DWPF) & Saltstone Facility Engineering (D&S-FE) to support the transfer of low-level aqueous waste from Tank 50H to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50H Waste Characterization System. Previous memorandamore » documenting the WAC analyses results have been issued for these three samples.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nguyen, Ba Nghiep; Simmons, Kevin L.
2013-08-06
This quarterly report summarizes the status for the project planning to obtain all the approvals required for a Cooperative Research and Development Agreement (CRADA) with Autodesk, Inc., Toyota Motor Engineering and Manufacturing North America (Toyota), and Magna Exterior and Interiors Corporation (Magna). The CRADA documents have been processed by PNNL Legal Services that is also coordinating the revision effort with the industrial parties to address DOE’s comments.
2010-12-25
ISS026-E-012158 (25 Dec. 2010) --- NASA astronaut Catherine (Cady) Coleman, Expedition 26 flight engineer, and one of six crew members currently aboard the International Space Station, peeks out of her sleeping quarters on Christmas morning to view the station’s decorations and gifts.
Barratt inside new crew quarters in Kibo
2009-09-02
ISS020-E-037855 (2 Sept. 2009) --- NASA astronaut Michael Barratt, Expedition 20 flight engineer, works inside a newly installed crew quarters compartment in the Kibo laboratory of the International Space Station while Space Shuttle Discovery (STS-128) remains docked with the station.
The International Space Station Habitat
NASA Technical Reports Server (NTRS)
Watson, Patricia Mendoza; Engle, Mike
2003-01-01
The International Space Station (ISS) is an engineering project unlike any other. The vehicle is inhabited and operational as construction goes on. The habitability resources available to the crew are the crew sleep quarters, the galley, the waste and hygiene compartment, and exercise equipment. These items are mainly in the Russian Service Module and their placement is awkward for the crew to deal with ISS assembly will continue with the truss build and the addition of International Partner Laboratories. Also, Node 2 and 3 will be added. The Node 2 module will provide additional stowage volume and room for more crew sleep quarters. The Node 3 module will provide additional Environmental Control and Life Support Capability. The purpose of the ISS is to perform research and a major area of emphasis is the effects of long duration space flight on humans, a result of this research they will determine what are the habitability requirements for long duration space flight.
Introduction to the Molecular Theory of Thermodynamics.
ERIC Educational Resources Information Center
Davis, H. Ted
1979-01-01
Described is the first quarter of a three quarter graduate course for the general engineering student on the molecular theory of thermodynamics and transport phenomena at the University of Minnesota. Three sections from the course, considered to exemplify its spirit and substance, are presented. (BT)
(Development of advanced models of the MCC full expansion (quiet) engine): First quarterly report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
This is the first quarterly report to the Department of Energy on the progress associated with the development of advanced models of the MCC full expansion (quiet) engine. These models will be evaluated in successive steps and eventually incorporated into a lawn mower for the purpose of commercializing the engine for small wheeled lawn and garden applications. During the first three months of the program (July 1 thru Sept 30), the Phase I design was basically completed with the exception of some engine/lawn mower interface hardware which will be completed during the final stages of the development program after wemore » have selected a lawn mower deck. Rick Erickson, the design engineer for the program, completed the initial parts drawings utilizing the computer drafting system together with guidance from Fredrick Erickson, the program principal engineer and Jeff Erickson, who is in charge of manufacturing the engines. A miniature copy of these drawings is included in the appendix for your review.« less
40 CFR 85.1904 - Voluntary emissions recall report; quarterly reports.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Voluntary emissions recall report... Requirements § 85.1904 Voluntary emissions recall report; quarterly reports. (a) When any manufacturer initiates a voluntary emissions recall campaign involving twenty-five or more vehicles or engines, the...
Science Books, A Quarterly Review, Volume 8 Number 3.
ERIC Educational Resources Information Center
American Association for the Advancement of Science, Washington, DC.
This quarterly publication is intended to acquaint students and teachers with new trade books, textbooks, and reference works in the pure and applied sciences. A listing of detailed subject fields is provided including psychology, sociology, economics, education, physical sciences, natural sciences, engineering, agriculture, geography and…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lottes, S.A.; Bojanowski, C.; Shen, J.
2012-04-09
The computational fluid dynamics (CFD) and computational structural mechanics (CSM) focus areas at Argonne's Transportation Research and Analysis Computing Center (TRACC) initiated a project to support and compliment the experimental programs at the Turner-Fairbank Highway Research Center (TFHRC) with high performance computing based analysis capabilities in August 2010. The project was established with a new interagency agreement between the Department of Energy and the Department of Transportation to provide collaborative research, development, and benchmarking of advanced three-dimensional computational mechanics analysis methods to the aerodynamics and hydraulics laboratories at TFHRC for a period of five years, beginning in October 2010. Themore » analysis methods employ well-benchmarked and supported commercial computational mechanics software. Computational mechanics encompasses the areas of Computational Fluid Dynamics (CFD), Computational Wind Engineering (CWE), Computational Structural Mechanics (CSM), and Computational Multiphysics Mechanics (CMM) applied in Fluid-Structure Interaction (FSI) problems. The major areas of focus of the project are wind and water effects on bridges - superstructure, deck, cables, and substructure (including soil), primarily during storms and flood events - and the risks that these loads pose to structural failure. For flood events at bridges, another major focus of the work is assessment of the risk to bridges caused by scour of stream and riverbed material away from the foundations of a bridge. Other areas of current research include modeling of flow through culverts to improve design allowing for fish passage, modeling of the salt spray transport into bridge girders to address suitability of using weathering steel in bridges, CFD analysis of the operation of the wind tunnel in the TFHRC wind engineering laboratory. This quarterly report documents technical progress on the project tasks for the period of October through December 2011.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lottes, S.A.; Bojanowski, C.; Shen, J.
2012-06-28
The computational fluid dynamics (CFD) and computational structural mechanics (CSM) focus areas at Argonne's Transportation Research and Analysis Computing Center (TRACC) initiated a project to support and compliment the experimental programs at the Turner-Fairbank Highway Research Center (TFHRC) with high performance computing based analysis capabilities in August 2010. The project was established with a new interagency agreement between the Department of Energy and the Department of Transportation to provide collaborative research, development, and benchmarking of advanced three-dimensional computational mechanics analysis methods to the aerodynamics and hydraulics laboratories at TFHRC for a period of five years, beginning in October 2010. Themore » analysis methods employ well benchmarked and supported commercial computational mechanics software. Computational mechanics encompasses the areas of Computational Fluid Dynamics (CFD), Computational Wind Engineering (CWE), Computational Structural Mechanics (CSM), and Computational Multiphysics Mechanics (CMM) applied in Fluid-Structure Interaction (FSI) problems. The major areas of focus of the project are wind and water effects on bridges - superstructure, deck, cables, and substructure (including soil), primarily during storms and flood events - and the risks that these loads pose to structural failure. For flood events at bridges, another major focus of the work is assessment of the risk to bridges caused by scour of stream and riverbed material away from the foundations of a bridge. Other areas of current research include modeling of flow through culverts to improve design allowing for fish passage, modeling of the salt spray transport into bridge girders to address suitability of using weathering steel in bridges, CFD analysis of the operation of the wind tunnel in the TFHRC wind engineering laboratory. This quarterly report documents technical progress on the project tasks for the period of January through March 2012.« less
, engineering and computing. Working with Fermilab scientists or engineers, interns have an opportunity to four quarters at Fermilab, alternating periods of full-time study at their schools with full-time
Retaining minorities in engineering: Assessment of a program prototype
NASA Astrophysics Data System (ADS)
Good, Jennifer Marie (Phillips)
Program assessment is an essential part of healthy program development. Assessment should include multiple considerations, dimensions, and outcomes that match the program's objectives. As a newly formed retention program, the Auburn University Minority Engineering Program, designed to help pre-engineering minority students make the transition into their freshman year of university studies, incorporated evaluation and assessment into all three components of the program (the interactive learning laboratory, critical-thinking workshops, and Sunday-evening tutorials) from the program's inception. If students successfully adapted to the university environment and the demands of the pre-engineering course of study, then retention of minority students in the College of Engineering should improve. Data were gathered on the students involved in the various program components. Students who entered the Minority Engineering Program were pre- and posttested on three standardized subtests (critical thinking, mathematics, and science reasoning) of the Collegiate Assessment of Academic Proficiency. The first-quarter grade-point averages of the students were also gathered to compare their grades to freshman students in previous quarters within the College of Engineering. Qualitative data were also gathered on this same group of students. An analysis of the data revealed that student achievement is affected by involvement in the Minority Engineering Program. Specifically, the first quarter grade point averages of students involved in the program exceeded those of their peers in earlier years of study prior to the program's existence. In addition, mathematics and science reasoning scores on standardized tests increased pre- to postintervention. Comments collected in journals and files also demonstrated use of critical-thinking and problem-solving skills employed by the students. Recommendations for alterations of the program were made based on the outcome of the program evaluation. Further suggestions for research in minority engineering program development and evaluation were also discussed.
Hydrologic Engineering Center: A Quarter Century 1964-1989
1989-01-01
consisted of an engineering tech- nician, a mathematician, four hydraulic engineers and a clerk- steno . During the last 25 years, staff members have...McPherson Jack Dangermond John Lager Don Hey Clarence Korhonen Harry Schwarz James Wright John J. Buckley Mike Savage Nicholas Lally Ralph
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nguyen, Ba Nghiep; Simmons, Kevin L.
This quarterly report summarizes the status for the project planning to initiate all the legal and contract documents required for establishing the subcontracts needed and a Cooperative Research and Development Agreement (CRADA) with Autodesk, Inc., Toyota Motor Engineering and Manufacturing North America (Toyota), and Magna Exterior and Interiors Corporation (Magna). During the first quarter (10/1/2012 to 12/31/2012), the statements of work (SOW) for the subcontracts to Purdue University, University of Illinois, and PlastiComp, Inc. were completed. A draft of the CRADA SOW was sent to Autodesk, Toyota, and Magna for technical and legal reviews. PNNL Legal Services contacted project partners’more » Legal counterparts for preparing legal documents for the project. A non-disclosure agreement was drafted and sent to all the parties for reviews.« less
Adjustment Notes for Apprentice and Trainee Estimates: December Quarter 2014. Support Document
ERIC Educational Resources Information Center
National Centre for Vocational Education Research (NCVER), 2015
2015-01-01
Apprentice and trainee data are reported by the State and Territory Training Authorities to National Centre for Vocational Education Research (NCVER) on a quarterly basis, starting at the September quarter of 1994. The set of data submitted that quarter is referred to as Collection 1. The sets of data submitted in subsequent quarters are referred…
14 CFR Appendix A to Part 23 - Simplified Design Load Criteria
Code of Federal Regulations, 2011 CFR
2011-01-01
... quarter-chord), delta planforms, or slatted lifting surfaces; or (5) Winglets or other wing tip devices... single engine excluding turbine powerplants; (2) A main wing located closer to the airplane's center of gravity than to the aft, fuselage-mounted, empennage; (3) A main wing that contains a quarter-chord sweep...
14 CFR Appendix A to Part 23 - Simplified Design Load Criteria
Code of Federal Regulations, 2010 CFR
2010-01-01
... quarter-chord), delta planforms, or slatted lifting surfaces; or (5) Winglets or other wing tip devices... single engine excluding turbine powerplants; (2) A main wing located closer to the airplane's center of gravity than to the aft, fuselage-mounted, empennage; (3) A main wing that contains a quarter-chord sweep...
49 CFR 541.5 - Requirements for passenger motor vehicles.
Code of Federal Regulations, 2011 CFR
2011-10-01
...) Engine. (2) Transmission. (3) Right front fender. (4) Left front fender. (5) Hood. (6) Right front door. (7) Left front door. (8) Right rear door. (9) Left rear door. (10) Sliding or cargo door(s). (11) Front bumper. (12) Rear bumper. (13) Right rear quarter panel (passenger cars). (14) Left rear quarter...
49 CFR 541.5 - Requirements for passenger motor vehicles.
Code of Federal Regulations, 2010 CFR
2010-10-01
...) Engine. (2) Transmission. (3) Right front fender. (4) Left front fender. (5) Hood. (6) Right front door. (7) Left front door. (8) Right rear door. (9) Left rear door. (10) Sliding or cargo door(s). (11) Front bumper. (12) Rear bumper. (13) Right rear quarter panel (passenger cars). (14) Left rear quarter...
Code of Federal Regulations, 2013 CFR
2013-07-01
... room means the compartment where a permanently installed gasoline or diesel engine is installed... boat is in its static floating position, except engine rooms. Connected means allowing a flow of water in excess of one-quarter ounce per hour from the engine room bilge into any other compartment with a...
Adjustment Notes for Apprentice and Trainee Estimates: December Quarter 2016. Support Document
ERIC Educational Resources Information Center
National Centre for Vocational Education Research (NCVER), 2017
2017-01-01
Apprentice and trainee data are reported by the State and Territory Training Authorities to NCVER on a quarterly basis, starting at the September quarter of 1994. The set of data submitted that quarter is referred to as Collection 1. The sets of data submitted in subsequent quarters are referred to as Collection 2, Collection 3 and so on. NCVER…
Adjustment Notes for Apprentice and Trainee Estimates: September Quarter 2016. Support Document
ERIC Educational Resources Information Center
National Centre for Vocational Education Research (NCVER), 2017
2017-01-01
Apprentice and trainee data are reported by the State and Territory Training Authorities to NCVER on a quarterly basis, starting at the September quarter of 1994. The set of data submitted that quarter is referred to as Collection 1. The sets of data submitted in subsequent quarters are referred to as Collection 2, Collection 3 and so on. NCVER…
Energy efficient engine: Fan test hardware detailed design report
NASA Technical Reports Server (NTRS)
Sullivan, T. J.
1980-01-01
A single stage fan and quarter stage booster were designed for the energy efficient engine. The fan has an inlet radius ratio of 0.342 and a specific flow rate of 208.9 Kg/S sq m (42.8 lbm/sec sq ft). The fan rotor has 32 medium aspect ratio (2.597) titanium blades with a partspan shroud at 55% blade height. The design corrected fan tip speed is 411.5 M/S (1350 ft/sec). The quarter stage island splits the total fan flow with approximately 22% of the flow being supercharged by the quarter stage rotor. The fan bypass ratio is 6.8. The core flow total pressure ratio is 1.67 and the fan bypass pressure ratio is 1.65. The design details of the fan and booster blading, and the fan frame and static structure for the fan configuration are presented.
Conducting Closed Habitation Experiments: Experience from the Lunar Mars Life Support Test Project
NASA Technical Reports Server (NTRS)
Barta, Daniel J.; Edeen, Marybeth A.; Henninger, Donald L.
2004-01-01
The Lunar-Mars Life Support Test Project (LMLSTP) was conducted from 1995 through 1997 at the National Aeronautics and Space Administration s (NASA) Johnson Space Center (JSC) to demonstrate increasingly longer duration operation of integrated, closed-loop life support systems that employed biological and physicochemical techniques for water recycling, waste processing, air revitalization, thermal control, and food production. An analog environment for long-duration human space travel, the conditions of isolation and confinement also enabled studies of human factors, medical sciences (both physiology and psychology) and crew training. Four tests were conducted, Phases I, II, IIa and III, with durations of 15, 30,60 and 91 days, respectively. The first phase focused on biological air regeneration, using wheat to generate enough oxygen for one experimental subject. The systems demonstrated in the later phases were increasingly complex and interdependent, and provided life support for four crew members. The tests were conducted using two human-rated, atmospherically-closed test chambers, the Variable Pressure Growth Chamber (VPGC) and the Integrated Life Support Systems Test Facility (ILSSTF). Systems included test articles (the life support hardware under evaluation), human accommodations (living quarters, kitchen, exercise equipment, etc.) and facility systems (emergency matrix system, power, cooling, etc.). The test team was managed by a lead engineer and a test director, and included test article engineers responsible for specific systems, subsystems or test articles, test conductors, facility engineers, chamber operators and engineering technicians, medical and safety officers, and science experimenters. A crew selection committee, comprised of psychologists, engineers and managers involved in the test, evaluated male and female volunteers who applied to be test subjects. Selection was based on the skills mix anticipated for each particular test, and utilized information from psychological and medical testing, data on the knowledge, experience and skills of the applicants, and team building exercises. The design, development, buildup and operation of test hardware and documentation followed the established NASA processes and requirements for test buildup and operation.
Conducting Closed Habitation Experiments: Experience from the Lunar Mars Life Support Test Project
NASA Technical Reports Server (NTRS)
Barta, Daniel J.; Edeen, Marybeth A.; Henninger, Donald L.
2006-01-01
The Lunar-Mars Life Support Test Project (LMLSTP) was conducted from 1995 through 1997 at the National Aeronautics and Space Administration s (NASA) Johnson Space Center (JSC) to demonstrate increasingly longer duration operation of integrated, closed-loop life support systems that employed biological and physicochemical techniques for water recycling, waste processing, air revitalization, thermal control, and food production. An analog environment for long-duration human space travel, the conditions of isolation and confinement also enabled studies of human factors, medical sciences (both physiology and psychology) and crew training. Four tests were conducted, Phases I, II, IIa and III, with durations of 15, 30, 60 and 91 days, respectively. The first phase focused on biological air regeneration, using wheat to generate enough oxygen for one experimental subject. The systems demonstrated in the later phases were increasingly complex and interdependent, and provided life support for four crew members. The tests were conducted using two human-rated, atmospherically-closed test chambers, the Variable Pressure Growth Chamber (VPGC) and the Integrated Life Support Systems Test Facility (ILSSTF). Systems included test articles (the life support hardware under evaluation), human accommodations (living quarters, kitchen, exercise equipment, etc.) and facility systems (emergency matrix system, power, cooling, etc.). The test team was managed by a lead engineer and a test director, and included test article engineers responsible for specific systems, subsystems or test articles, test conductors, facility engineers, chamber operators and engineering technicians, medical and safety officers, and science experimenters. A crew selection committee, comprised of psychologists, engineers and managers involved in the test, evaluated male and female volunteers who applied to be test subjects. Selection was based on the skills mix anticipated for each particular test, and utilized information from psychological and medical testing, data on the knowledge, experience and skills of the applicants, and team building exercises. The design, development, buildup and operation of test hardware and documentation followed the established NASA processes and requirements for test buildup and operation.
Cristoforetti in Crew quarters
2014-12-06
iss042e023422 (12/6/14) --- Expedition 42 Flight Engineer Samantha Cristoforetti of the European Space Agency (ESA) on 6 December 2014 is seen inside of a sleeping bag in her personal crew quarters on the International Space Station. Astronauts will strap the bag to the wall to prevent from free floating and potentially bumping into equipment while sleeping.
2015-06-23
DISTRIBUTION/AVAILABILITY STATEMENT DISTRIBUTION A 13. SUPPLEMENTARY NOTES 14. ABSTRACT Fighter jets and other aircraft with high specific thrust engines...interim, memorandum, master’s thesis , progress, quarterly, research, special, group study, etc. 3. DATES COVERED. Indicate the time during which the...State the type of report, such as final, technical, interim, memorandum, master’s thesis , progress, quarterly, research, special, group study, etc
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lottes, S. A.; Kulak, R. F.; Bojanowski, C.
2011-05-19
This project was established with a new interagency agreement between the Department of Energy and the Department of Transportation to provide collaborative research, development, and benchmarking of advanced three-dimensional computational mechanics analysis methods to the aerodynamics and hydraulics laboratories at the Turner-Fairbank Highway Research Center for a period of five years, beginning in October 2010. The analysis methods employ well-benchmarked and supported commercial computational mechanics software. Computational mechanics encompasses the areas of Computational Fluid Dynamics (CFD), Computational Wind Engineering (CWE), Computational Structural Mechanics (CSM), and Computational Multiphysics Mechanics (CMM) applied in Fluid-Structure Interaction (FSI) problems. The major areas of focusmore » of the project are wind and water loads on bridges - superstructure, deck, cables, and substructure (including soil), primarily during storms and flood events - and the risks that these loads pose to structural failure. For flood events at bridges, another major focus of the work is assessment of the risk to bridges caused by scour of stream and riverbed material away from the foundations of a bridge. Other areas of current research include modeling of flow through culverts to assess them for fish passage, modeling of the salt spray transport into bridge girders to address suitability of using weathering steel in bridges, vehicle stability under high wind loading, and the use of electromagnetic shock absorbers to improve vehicle stability under high wind conditions. This quarterly report documents technical progress on the project tasks for the period of January through March 2011.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1993-09-01
Accomplishments for the past quarter are presented for the following tasks: Chemical flooding--supporting research; gas displacement--supporting research; thermal recovery--supporting research; geoscience technology; resource assessment technology; microbial technology; and novel technology. A list of available publication is also provided.
2000-09-08
KENNEDY SPACE CENTER, Fla. -- Space Shuttle Atlantis streaks into the sky on mission STS-106 after a perfect on-time launch at 8:45:47 a.m. EDT. Blue mach diamonds are barely visible behind the main engine nozzles. On the 11-day mission to the International Space Station, the seven-member crew will perform support tasks on orbit, transfer supplies and prepare the living quarters in the newly arrived Zvezda Service Module. The first long-duration crew, dubbed “Expedition One,” is due to arrive at the Station in late fall. Landing of Atlantis is targeted for 4:45 a.m. EDT on Sept. 19
2000-09-08
KENNEDY SPACE CENTER, Fla. -- Space Shuttle Atlantis streaks into the sky on mission STS-106 after a perfect on-time launch at 8:45:47 a.m. EDT. Blue mach diamonds are barely visible behind the main engine nozzles. On the 11-day mission to the International Space Station, the seven-member crew will perform support tasks on orbit, transfer supplies and prepare the living quarters in the newly arrived Zvezda Service Module. The first long-duration crew, dubbed “Expedition One,” is due to arrive at the Station in late fall. Landing of Atlantis is targeted for 4:45 a.m. EDT on Sept. 19
40 CFR 86.1920 - What in-use testing information must I report to EPA?
Code of Federal Regulations, 2014 CFR
2014-07-01
... (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES Manufacturer-Run In-Use Testing Program for Heavy-Duty Diesel Engines § 86.1920 What in-use testing information... engine for which testing was completed during the calendar quarter. Alternatively, you may separately...
40 CFR 86.1920 - What in-use testing information must I report to EPA?
Code of Federal Regulations, 2012 CFR
2012-07-01
... (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES (CONTINUED) Manufacturer-Run In-Use Testing Program for Heavy-Duty Diesel Engines § 86.1920 What in-use... data from each engine for which testing was completed during the calendar quarter. Alternatively, you...
40 CFR 86.1920 - What in-use testing information must I report to EPA?
Code of Federal Regulations, 2013 CFR
2013-07-01
... (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES (CONTINUED) Manufacturer-Run In-Use Testing Program for Heavy-Duty Diesel Engines § 86.1920 What in-use... data from each engine for which testing was completed during the calendar quarter. Alternatively, you...
13. Photograph of line drawing in possession of the Engineering ...
13. Photograph of line drawing in possession of the Engineering Division of the Directorate of Engineering and Housing, Watervliet Arsenal, New York. BRICK BAY FOR OFFICERS QUARTERS, BRICK SET, EAST SIDE, PLAN AND ELEVATION, OCTOBER 18, 1886. - Watervliet Arsenal, Building No. 4, Mordecai Drive, West of Mettler Road, Watervliet, Albany County, NY
40 CFR 86.1920 - What in-use testing information must I report to EPA?
Code of Federal Regulations, 2011 CFR
2011-07-01
... (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES (CONTINUED) Manufacturer-Run In-Use Testing Program for Heavy-Duty Diesel Engines § 86.1920 What in-use... data from each engine for which testing was completed during the calendar quarter. Alternatively, you...
A study of the factors affecting advancement and graduation for engineering students
NASA Astrophysics Data System (ADS)
Fletcher, John Thomas
The purpose of this study was, first, to determine whether a set of predictor variables could be identified from pre-enrollment and post-enrollment data that would differentiate students who advance to a major in engineering from non-advancers and, further, to determine if the predictor variables would differentiate students who graduate from the College of Engineering from non-graduates and graduates of other colleges at Auburn University. A second purpose was to determine if the predictor variables would correctly identify male and female students with the same degree of accuracy. The third purpose was to determine if there were significant relationships between the predictor variables studied and grades earned in a set of 15 courses that have enrollments over 100 students and are part of the pre-engineering curriculum. The population for this study was the 868 students who entered the pre-engineering program at Auburn University as freshmen during the Summer and Fall Quarters of 1991. The variables selected to differentiate the different groups were ACT scores, high school grade indices, and first quarter college grade point average. Two sets of classification matrices were developed using analysis and holdout samples that were divided based on sex. With respect to the question about advancement to the professional engineering program, structure coefficients derived from discriminant analysis procedures performed on all the cases combined indicated that first quarter college grade point average, high school math index, ACT math score, and high school science grade index were important predictor variables in classifying students who advanced to the professional engineering program and those who did not. Further, important structure coefficients with respect to graduation with a degree from the College of Engineering were first quarter college grade point average, high school math index, ACT math score, and high school science grade index. The results of this study indicated that significant differences existed in the model's ability to predict advancement and graduation for male and female students. This difference was not unexpected based on the male-dominated population. However, the models identified predicted at a high rate for both male and female students. Finally, many significant relationships were found to exist between the predictor variables and the 15 pre-engineering courses that were selected. The strength of the relationships ranged from a high of .82, p < .001 (Chemistry 103 grade with total high school grade index) to a low of .07, p > .05 (Chemistry 102 with ACT science score).
Quarterly environmental data summary for first quarter 1999
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
In support of the Weldon Spring Site Remedial Action Project Federal Facilities Agreement, a copy of the Quarterly Environmental Data Summary (QEDS) for the first quarter of 1999 is enclosed. The data presented in this constitute the QEDS. The data, except for air monitoring data and site KPA generated data (uranium analyses), were received from the contract laboratories, verified by the Weldon Spring Site verification group and merged into the database during the first quarter of 1999. KPA results for on-site total uranium analyses performed during first quarter 1999 are included. Air monitoring data presented are the most recent completemore » sets of quarterly data.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lottes, S.A.; Kulak, R.F.; Bojanowski, C.
2011-12-09
The computational fluid dynamics (CFD) and computational structural mechanics (CSM) focus areas at Argonne's Transportation Research and Analysis Computing Center (TRACC) initiated a project to support and compliment the experimental programs at the Turner-Fairbank Highway Research Center (TFHRC) with high performance computing based analysis capabilities in August 2010. The project was established with a new interagency agreement between the Department of Energy and the Department of Transportation to provide collaborative research, development, and benchmarking of advanced three-dimensional computational mechanics analysis methods to the aerodynamics and hydraulics laboratories at TFHRC for a period of five years, beginning in October 2010. Themore » analysis methods employ well-benchmarked and supported commercial computational mechanics software. Computational mechanics encompasses the areas of Computational Fluid Dynamics (CFD), Computational Wind Engineering (CWE), Computational Structural Mechanics (CSM), and Computational Multiphysics Mechanics (CMM) applied in Fluid-Structure Interaction (FSI) problems. The major areas of focus of the project are wind and water effects on bridges - superstructure, deck, cables, and substructure (including soil), primarily during storms and flood events - and the risks that these loads pose to structural failure. For flood events at bridges, another major focus of the work is assessment of the risk to bridges caused by scour of stream and riverbed material away from the foundations of a bridge. Other areas of current research include modeling of flow through culverts to assess them for fish passage, modeling of the salt spray transport into bridge girders to address suitability of using weathering steel in bridges, CFD analysis of the operation of the wind tunnel in the TFCHR wind engineering laboratory, vehicle stability under high wind loading, and the use of electromagnetic shock absorbers to improve vehicle stability under high wind conditions. This quarterly report documents technical progress on the project tasks for the period of July through September 2011.« less
The 3d International Workshop on Computational Electronics
NASA Astrophysics Data System (ADS)
Goodnick, Stephen M.
1994-09-01
The Third International Workshop on Computational Electronics (IWCE) was held at the Benson Hotel in downtown Portland, Oregon, on May 18, 19, and 20, 1994. The workshop was devoted to a broad range of topics in computational electronics related to the simulation of electronic transport in semiconductors and semiconductor devices, particularly those which use large computational resources. The workshop was supported by the National Science Foundation (NSF), the Office of Naval Research and the Army Research Office, as well as local support from the Oregon Joint Graduate Schools of Engineering and the Oregon Center for Advanced Technology Education. There were over 100 participants in the Portland workshop, of which more than one quarter represented research groups outside of the United States from Austria, Canada, France, Germany, Italy, Japan, Switzerland, and the United Kingdom. There were a total 81 papers presented at the workshop, 9 invited talks, 26 oral presentations and 46 poster presentations. The emphasis of the contributions reflected the interdisciplinary nature of computational electronics with researchers from the Chemistry, Computer Science, Mathematics, Engineering, and Physics communities participating in the workshop.
ERIC Educational Resources Information Center
McMullin, Keith; Reeve, Edward
2014-01-01
An educational crisis has been reported from many scholarly platforms for the last quarter century. The United States is faced with the challenge of providing a secondary science, technology, engineering, and math (STEM) education, especially in secondary pre-engineering, that will lead its students to the fulfillment of academic and domestic…
7 CFR 1430.505 - Proof of production.
Code of Federal Regulations, 2010 CFR
2010-01-01
... operation was commercially marketing milk anytime during the fourth quarter of 1998. The dairy operation... marketing milk during the fourth quarter of 1998 shall provide any available supporting documents to assist... during the fourth quarter of 1998 and the base period milk marketings indicated on Form CCC-1040...
NASA Astrophysics Data System (ADS)
The newly incorporated International Mountain Society (IMS) will in May begin publication of an interdisciplinary scientific journal, Mountain Research and Development. The quarterly will be copublished with the United National University; additional support will come from UNESCO.A primary objective of IMS is to ‘help solve mountain land-use problems by developing a foundation of scientific and technical knowledge on which to base management decisions,’ according to Jack D. Ives, president of the Boulder-based organization. ‘The Society is strongly committed to the belief that a rational worldwide approach to mountain problems must involve a wide range of disciplines in the natural and human sciences, medicine, architecture, engineering, and technology.’
NASA Technical Reports Server (NTRS)
Miley, Steven C.
2009-01-01
The Marshall Small Business Association (MSBA) serves as a central point of contact to inform and educate small businesses interested in pursuing contracting and subcontracting opportunities at the Marshall Space Flight Center. The MSBA meets quarterly to provide industry with information about how to do business with Marshall and to share specific information about Marshall s mission, which allows private businesses to envision how they might contribute. For the February 19 meeting, the Engineering Directorate will give an overview of its unique capabilities and how it is organized to provide maximum support for the programs and projects resident at Marshall, for example, the Space Shuttle Propulsion Office, Ares Projects Office, and Science and Mission Systems Office. This briefing provides a top-level summary of the work conducted by Marshall s largest organization, while explaining how resources are deployed to perform the volume of work under Marshall s purview.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Larry Zirker; James Francfort
2004-02-01
This Oil Bypass Filter Technology Evaluation quarterly report (October-December 2003) details the ongoing fleet evaluation of an oil bypass filter technology by the Idaho National Engineering and Environmental Laboratory (INEEL) for the U.S. Department of Energy's FreedomCAR & Vehicle Technologies Program. Eight four-cycle diesel-engine buses used to transport INEEL employees on various routes have been equipped with oil bypass filter systems from the puraDYN Corporation. The bypass filters are reported to have engine oil filtering capability of <1 micron and a built-in additive package to facilitate extended oil-drain intervals. To date, the eight buses have accumulated 324,091 test miles. Thismore » represents an avoidance of 27 oil changes, which equate to 952 quarts (238 gallons) of new oil not conserved and therefore, 952 quarts of waste oil not generated. To validate the extended oil-drain intervals, an oil-analysis regime is used to evaluate the fitness of the oil for continued service by monitoring the presence of necessary additives, undesirable contaminants, and engine-wear metals. The test fleet has been expanded to include six Chevrolet Tahoe sport utility vehicles with gasoline engines.« less
ERIC Educational Resources Information Center
Bentley, Ernest L; And Others
Six Atlanta, Georgia, school systems initiated a four-quarter school year program in 1968-69. An exploratory study was conducted to develop procedures and instruments for a comprehensive examination of the plan. Strong support exists in all groups interviewed -- superintendents and steering committee members, students, parents, teachers,…
2014-06-19
Cosmonaut Oleg Artemyev, Expedition 40 flight engineer, is photographed still wearing his liquid cooling and ventilation garment after a Russian Extravehicular Activity (EVA). Artemyev is standing in his crew quarters (CQ).
NASA Supportability Engineering Implementation Utilizing DoD Practices and Processes
NASA Technical Reports Server (NTRS)
Smith, David A.; Smith, John V.
2010-01-01
The Ares I design and development program made the determination early in the System Design Review Phase to utilize DoD ILS and LSA approach for supportability engineering as an integral part of the system engineering process. This paper is to provide a review of the overall approach to design Ares-I with an emphasis on a more affordable, supportable, and sustainable launch vehicle. Discussions will include the requirements development, design influence, support concept alternatives, ILS and LSA planning, Logistics support analyses/trades performed, LSA tailoring for NASA Ares Program, support system infrastructure identification, ILS Design Review documentation, Working Group coordination, and overall ILS implementation. At the outset, the Ares I Project initiated the development of the Integrated Logistics Support Plan (ILSP) and a Logistics Support Analysis process to provide a path forward for the management of the Ares-I ILS program and supportability analysis activities. The ILSP provide the initial planning and coordination between the Ares-I Project Elements and Ground Operation Project. The LSA process provided a system engineering approach in the development of the Ares-I supportability requirements; influence the design for supportability and development of alternative support concepts that satisfies the program operability requirements. The LSA planning and analysis results are documented in the Logistics Support Analysis Report. This document was required during the Ares-I System Design Review (SDR) and Preliminary Design Review (PDR) review cycles. To help coordinate the LSA process across the Ares-I project and between programs, the LSA Report is updated and released quarterly. A System Requirement Analysis was performed to determine the supportability requirements and technical performance measurements (TPMs). Two working groups were established to provide support in the management and implement the Ares-I ILS program, the Integrated Logistics Support Working Group (ILSWG) and the Logistics Support Analysis Record Working Group (LSARWG). The Ares I ILSWG is established to assess the requirements and conduct, evaluate analyses and trade studies associated with acquisition logistic and supportability processes and to resolve Ares I integrated logistics and supportability issues. It established a strategic collaborative alliance for coordination of Logistics Support Analysis activates in support of the integrated Ares I vehicle design and development of logistics support infrastructure. A Joint Ares I - Orion LSAR Working Group was established to: 1) Guide the development of Ares-I and Orion LSAR data and serve as a model for future Constellation programs, 2) Develop rules and assumptions that will apply across the Constellation program with regards to the program's LSAR development, and 3) Maintain the Constellation LSAR Style Guide.
Automotive Stirling Engine Development Program
NASA Technical Reports Server (NTRS)
1978-01-01
The third quarter (April-June, 1978) effort of the Ford/DOE Automotive Stirling Engine Development Program is reported, specifically Task 1 of that effort, which is Fuel Economy Assessment. At the end of this quarter the total fourth generation fuel economy projection was 26.12 MPG (gasoline) with a confidence level of 44%. This represents an improvement of 66.4% over the baseline M-H fuel economy of 15.7 MPG. The confidence level for the original 20.6 MPG goal has been increased from 53% to 57%. Engine 3X17 has accumulated a total of 213 hours of variable speed running. A summary of the individual sub-tasks of Task 1 are given. The sub-tasks are grouped into two categories: Category 1 consists of those sub-tasks which are directly related to fuel economy and Category 2 consists of those sub-tasks which are not directly related to fuel economy but are an integral part of the Task 1 effort.
Lab-on-a-Chip Design-Build Project with a Nanotechnology Component in a Freshman Engineering Course
ERIC Educational Resources Information Center
Allam, Yosef; Tomasko, David L.; Trott, Bruce; Schlosser, Phil; Yang, Yong; Wilson, Tiffany M.; Merrill, John
2008-01-01
A micromanufacturing lab-on-a-chip project with a nanotechnology component was introduced as an alternate laboratory in the required first-year engineering curriculum at The Ohio State University. Nanotechnology is introduced in related reading and laboratory tours as well as laboratory activities including a quarter-length design, build, and test…
Women's Leadership in Science, Technology, Engineering and Mathematics: Barriers to Participation
ERIC Educational Resources Information Center
McCullough, Laura
2011-01-01
Despite gains overall, women are still under-represented in leadership positions in science, technology, engineering, and mathematics (STEM) fields. Data in the US suggest around one-quarter of deans and department heads are women; in science this drops to nearly 1 in 20. Part of this problem of under-representation stems from the population pool:…
2008-01-01
occurs to the target. In the end, “foot- pounds of energy” is misleading, “stopping power” is a myth, and the “ oneshot drop” is a rare possibility...Crane, IN, (NSWC- Crane) and the Army’s Armaments Research , Development, and Engineering Center (ARDEC) at Picatinny Arsenal, NJ, pro- duced...still had differences that could not initially be explained. The IPT was ultimately able to determine a reason for the dif- ferences. The Army Research
PILOT-SCALE EVALUATION OF ENGINEERED BARIER SYSTEMS FOR THE YUCCA MOUNTAIN PROJECT
DOE Office of Scientific and Technical Information (OSTI.GOV)
S.W. Webb; J.T. George; R.E. Finley
This paper describes two quarter-scale experiments (1.4 m diameter) and associated numerical analyses on granular backfill engineered barrier systems in support of the Yucca Mountain Project for the potential repository. The two configurations include a sloped capillary barrier and a plain backfill. The tests involve application of dyed water as a constant line infiltration source along the top of the test set-up, monitoring water movement through the test, and measuring water exiting the experiments. A complete water balance estimate is made for each test, and observed water movement is compared with (1) detailed numerical analyses conducted using the TOUGH2 codemore » for unsaturated flow in porous media and (2) posttest observations. The results of the testing and analyses show that for the injection rates and configuration applied, the capillary barrier design diverts a significant amount of all injected water and the TOUGH2 pretest predictions show qualitative and quantitative agreement with the experimental data.« less
ODOT research news : summer quarter 2002.
DOT National Transportation Integrated Search
2002-01-01
The newsletter includes: : 1) High School Student Apprentices with Research; : 2) Summer Work for Engineering Student; : 3) WASHTO-X is Underway; : 4) Shear Capacity Assessment of Corrosion-Damaged, Reinforced Concrete Beams; : 5) Railroad Crossing I...
Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nguyen, Ba Nghiep; Simmons, Kevin L.
This quarterly report summarizes the status for the project planning to complete all the legal and contract documents required for establishing the subcontracts needed and a Cooperative Research and Development Agreement (CRADA) with Autodesk, Inc., Toyota Motor Engineering and Manufacturing North America (Toyota), and Magna Exterior and Interiors Corporation (Magna). During the second quarter (1/1/2013 to 3/31/2013), all the technical and legal documents for the subcontracts to Purdue University, University of Illinois, and PlastiComp, Inc. were completed. The revised CRADA documents were sent to DOE, Autodesk, Toyota, and Magna for technical and legal reviews. PNNL Legal Services contacted project partners’more » Legal counterparts for completing legal documents for the project. A non-disclosure agreement was revised and sent to all the parties for reviews.« less
F101 Central Integrated Test Subsystem Evaluation.
1980-02-01
These sensors are for fan rpm, core rpm, nozzle position, turbine blade temperature, engine exhaust gas tem- perature, lube oil pressure, lube oil...condition or a turbine blade (T4B) overtemperature condition, the CITS was to record the out-of-limits parameter every quarter-second that the engine was in...cycles on the turbine blades . The PLA cycle has become the most important LCF measurement to the YF101 and F1O engines in the B-1 Flight Test Program
2000-09-08
STS106-S-015 (8 September 2000) --- The Space Shuttle Atlantis streaks into the sky on mission STS-106 after a perfect on-time launch at 8:45:47 a.m. (EDT), September 8, 2000. Blue mach diamonds are barely visible beneath the main engine nozzles. On the 11-day mission to the International Space Station, the seven-member crew will perform support tasks on orbit; transfer supplies and prepare the living quarters in the newly arrived Zvezda Service Module. The first long-duration crew is due to arrive at the Station in late fall. Onboard the spacecraft were astronauts Terrance W. Wilcutt, Scott D. Altman, Edward T. Lu, Richard A. Mastracchio and Daniel C. Burbank, along with cosmonauts Yuri I. Malenchenko and Boris Morukov, both of whom represent Rosaviakosmos.
Astronaut William Gregory prepares to exit his sleep quarters
NASA Technical Reports Server (NTRS)
1995-01-01
Astronaut William G. Gregory, STS-67 pilot, ejects a cassette and prepares to bail out of his sleep quarters aboard the Earth orbiting Space Shuttle Endeavour. The astronaut was about to begin a shift of support to the red team.
1964-02-01
Temporary quarters in the Huntsville Industrial Center (HIC) building located in downtown Huntsville, Alabama, as Marshall Space Flight Center (MSFC) grew. This image shows drafting specialists from the Propulsion and Vehicle Engineering Laboratory at work in the HIC building.
Thermoacoustic refrigerators and engines comprising cascading stirling thermodynamic units
Backhaus, Scott; Swift, Greg
2013-06-25
The present invention includes a thermoacoustic assembly and method for improved efficiency. The assembly has a first stage Stirling thermal unit comprising a main ambient heat exchanger, a regenerator and at least one additional heat exchanger. The first stage Stirling thermal unit is serially coupled to a first end of a quarter wavelength long coupling tube. A second stage Stirling thermal unit comprising a main ambient heat exchanger, a regenerator, and at least one additional heat exchanger, is serially coupled to a second end of the quarter wavelength long coupling tube.
ERIC Educational Resources Information Center
Olmedo-Torre, Noelia; Farrerons Vidal, Oscar
2017-01-01
We present a strategy for the acquisition and assessment of autonomous learning conducted as part of the Graphic Expression in Engineering (GE) degree course during the first quarter at the Escola Universitària d'Enginyeria Tècnica Industrial de Barcelona (EUETIB). The strategy employed is the puzzle technique in the classroom and multiple-choice…
Gifted Education Quarterly, 1998.
ERIC Educational Resources Information Center
Fisher, Maurice, Ed.
1998-01-01
These four issues of "Gifted Education Quarterly" include the following articles: (1) "Using Test Results To Support Clinical Judgment" (Linda Kreger Silverman), which discusses some of the difficulties in obtaining accurate indications of a child's level of giftedness and the importance of using professional judgment in…
Engaging undergradate students in interdisciplinary courses in nanotechnology
NASA Astrophysics Data System (ADS)
Goodchild, Fiona
2008-03-01
Two new courses at UCSB engage both undergraduate and graduate students in situated learning so that they can acquire the knowledge and skills they will need for future academic courses and career development. These courses are designed and taught by research faculty and education staff at the California Nanosystems Institute (CNSI) at UC Santa Barbara. The speaker, Dr. Goodchild, Education Director at CNSI, collaborated in the course design and is advisor on assessment and pedagogy for both courses. The first course, entitled INSCITES, is aimed at first and second year students who are interested in the impacts of science and technology in society. This general education course is team taught by three Graduate Teaching Scholars from across engineering, science and social sciences. They collaborate with lead faculty from Materials Science and History to design both the curriculum and instructional format for the 10 week course that is supported by the National Science Foundation. INSCITES was taught for the first time in Spring 2007 and feedback indicated that the course had convinced the undergraduate students that they would like to take further courses outside their majors. The second course, entitled the Practice of Science is open to all majors in science and engineering, especially those in second and third year who are interested in scientific research and related career opportunities. The course has been taught for the past 4 years as a two quarter course by two research faculty who focus on the nature of scientific discovery, the role of graduate researchers and faculty, the challenges of collaboration across disciplines and the mechanisms for funding research in academia and industry. In the first quarter each students is expected to identify a mentor and a research group in which they can pursue an individual research project, to be completed during the second quarter when the classes are designed to operate like research group meetings. Evaluation indicates that both courses attract students from underrepresented groups in science who value gaining a broader perspective about nanotechnology and the career opportunities that it offers to undergraduate students.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lottes, S.A.; Kulak, R.F.; Bojanowski, C.
2011-08-26
The computational fluid dynamics (CFD) and computational structural mechanics (CSM) focus areas at Argonne's Transportation Research and Analysis Computing Center (TRACC) initiated a project to support and compliment the experimental programs at the Turner-Fairbank Highway Research Center (TFHRC) with high performance computing based analysis capabilities in August 2010. The project was established with a new interagency agreement between the Department of Energy and the Department of Transportation to provide collaborative research, development, and benchmarking of advanced three-dimensional computational mechanics analysis methods to the aerodynamics and hydraulics laboratories at TFHRC for a period of five years, beginning in October 2010. Themore » analysis methods employ well-benchmarked and supported commercial computational mechanics software. Computational mechanics encompasses the areas of Computational Fluid Dynamics (CFD), Computational Wind Engineering (CWE), Computational Structural Mechanics (CSM), and Computational Multiphysics Mechanics (CMM) applied in Fluid-Structure Interaction (FSI) problems. The major areas of focus of the project are wind and water loads on bridges - superstructure, deck, cables, and substructure (including soil), primarily during storms and flood events - and the risks that these loads pose to structural failure. For flood events at bridges, another major focus of the work is assessment of the risk to bridges caused by scour of stream and riverbed material away from the foundations of a bridge. Other areas of current research include modeling of flow through culverts to assess them for fish passage, modeling of the salt spray transport into bridge girders to address suitability of using weathering steel in bridges, vehicle stability under high wind loading, and the use of electromagnetic shock absorbers to improve vehicle stability under high wind conditions. This quarterly report documents technical progress on the project tasks for the period of April through June 2011.« less
Design and Test of Fan/Nacelle Models Quiet High-Speed Fan
NASA Technical Reports Server (NTRS)
Miller, Christopher J. (Technical Monitor); Weir, Donald
2003-01-01
The Quiet High-Speed Fan program is a cooperative effort between Honeywell Engines & Systems (formerly AlliedSignal Engines & Systems) and the NASA Glenn Research Center. Engines & Systems has designed an advanced high-speed fan that will be tested on the Ultra High Bypass Propulsion Simulator in the NASA Glenn 9 x 15 foot wind tunnel, currently scheduled for the second quarter of 2000. An Engines & Systems modern fan design will be used as a baseline. A nacelle model is provided that is characteristic of a typical, modern regional aircraft nacelle and meets all of the program test objectives.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Boyd, Tonya; Maddi, Phillip
2012-08-01
The National Geothermal Academy (NGA) is an intensive 8-week overview of the different aspects involved in developing a geothermal project, hosted at University of Nevada, Reno. The class of 2012 was the second graduating class from the academy and included 21 students from nine states, as well as Saudi Arabia, Dominica, India, Trinidad, Mexico. The class consisted of people from a wide range of scholastic abilities from students pursuing a Bachelor’s or Master’s degrees, to entrepreneurs and professionals looking to improve their knowledge in the geothermal field. Students earned 6 credits, either undergraduate or graduate, in engineering or geology. Overall,more » the students of the NGA, although having diverse backgrounds in engineering, geology, finance, and other sciences, came together with a common passion to learn more about geothermal.« less
2008-01-30
Energy Fusion Cell, and allocations include $110 million for oil pipeline exclusion zones—which aim to prevent illegal tapping and sabotage of...sectors in Iraq. This quarter SIGIR highlights two of these programs: the electronic funds transfer ( EFT ) system and U.S. advisory support provided to...the Iraq Stock Exchange. eleCTroniC funds Transfer SIGIR noted last quarter that Iraq finally acti- vated an electronic funds transfer ( EFT ) system
2008-01-30
Cell, and allocations include $110 million for oil pipeline exclusion zones—which aim to prevent illegal tapping and sabotage of pipelines—$51...This quarter SIGIR highlights two of these programs: the electronic funds transfer ( EFT ) system and U.S. advisory support provided to the Iraq Stock...Exchange. eleCTroniC funds Transfer SIGIR noted last quarter that Iraq finally acti- vated an electronic funds transfer ( EFT ) system. The United
Focus on China. Joint Force Quarterly, Issue 47, 4th Quarter 2007
2007-01-01
and the informa- tion age —is creating a paper dragon. This issue of Joint Force Quarterly takes a look at China and Sino-U.S. engagement, as well...Golden Age because “forthwith, multitudes would resort to his dominions.”26 Confucius likened this dynamic almost to an irresistible force of...China’s support from an international perspective. China only recently became comfortable in its “liberal internationalist skin ,” but it has since
BIOMASS REBURNING - MODELING/ENGINEERING STUDIES
DOE Office of Scientific and Technical Information (OSTI.GOV)
Vladimir Zamansky; Chris Lindsey
This project is designed to develop engineering and modeling tools for a family of NO{sub x}control technologies utilizing biomass as a reburning fuel. During the eighth reporting period (July 1--September 26, 1999), Antares Group Inc, under contract to Niagara Mohawk Power Corporation, evaluated the economic feasibility of biomass reburning options for Dunkirk Station. This report includes summary of the findings; complete information will be submitted in the next Quarterly Report.
2013-09-18
At his Cosmonaut Hotel crew quarters in Baikonur, Kazakhstan, Expedition 37/38 Flight Engineer Michael Hopkins of NASA conducts a series of chin up exercises Sept. 18. Hopkins, Soyuz Commander Oleg Kotov and Flight Engineer Sergey Ryazanskiy are set to launch Sept. 26, Kazakh time, from the Baikonur Cosmodrome on their Soyuz TMA-10M spacecraft for a five and a half month mission on the International Space Station. NASA/Victor Zelentsov
Temporary Laboratory Office in Huntsville Industrial Center Building
NASA Technical Reports Server (NTRS)
1964-01-01
Temporary quarters in the Huntsville Industrial Center (HIC) building located in downtown Huntsville, Alabama, as Marshall Space Flight Center (MSFC) grew. This image shows drafting specialists from the Propulsion and Vehicle Engineering Laboratory at work in the HIC building.
Residential Group Care Quarterly. Volume 5, Number 1, Summer 2004
ERIC Educational Resources Information Center
Kirkwood, Scott, Ed.
2004-01-01
This issue of "Residential Group Care Quarterly" contains the following articles: (1) "National Definitions and Data Collection for Residential Care Facilities' Use of Restraint and Seclusion" (Lloyd Bullard); (2) "CWLA Publishes Best Practices in Behavior Support and Intervention Assessment Instrument" (Nupur Gupta); (3) "Initial Findings of an…
1988-02-01
Anthony Falls Water Company, who deeded 1995 acres of land at Gull Lake for the purpose (Kane, 1966: 159). Despite the unique nature of the reservoir system...dwelling, laborers’ quarters, engineers’ quarters, a dining hall, an office building, an officer’s ho.se, a wood shed, a chicken coop, a barn, a...a barn, carpenter and blacksmith shops, two warehouses, a wood shed and a chicken coop (Figure 42). The "new" dwelling was destroyed by another fire
DOE Office of Scientific and Technical Information (OSTI.GOV)
Davis, G.; Mansur, D.L.; Ruhter, W.D.
1994-10-01
This report presents the details of the Lawrence Livermore National Laboratory safeguards and securities program. This program is focused on developing new technology, such as x- and gamma-ray spectrometry, for measurement of special nuclear materials. This program supports the Office of Safeguards and Securities in the following five areas; safeguards technology, safeguards and decision support, computer security, automated physical security, and automated visitor access control systems.
International Space Station USOS Crew Quarters Development
NASA Technical Reports Server (NTRS)
Broyan, James Lee, Jr.; Borrego, Melissa Ann; Bahr, Juergen F.
2008-01-01
The International Space Station (ISS) United States Operational Segment (USOS) currently provides a Temporary Sleep Station (TeSS) as crew quarters for one crewmember in the Laboratory Module. The Russian Segment provides permanent crew quarters (Kayutas) for two crewmembers in the Service Module. The TeSS provides limited electrical, communication, and ventilation functionality. A new permanent rack sized USOS ISS Crew Quarters (CQ) is being developed. Up to four CQs can be installed into the Node 2 element to increase the ISS crewmember size to six. The new CQs will provide private crewmember space with enhanced acoustic noise mitigation, integrated radiation reduction material, controllable airflow, communication equipment, redundant electrical systems, and redundant caution and warning systems. The rack sized CQ is a system with multiple crewmember restraints, adjustable lighting, controllable ventilation, and interfaces that allow each crewmember to personalize their CQ workspace. Providing an acoustically quiet and visually isolated environment, while ensuring crewmember safety, is critical for obtaining crewmember rest and comfort to enable long term crewmember performance. The numerous human factor, engineering, and program considerations during the concept, design, and prototyping are outlined in the paper.
ASTRONAUT STAFFORD, THOMAS P. - PLAQUES - JSC
1975-02-01
S75-25823 (February 1975) --- Cosmonaut Aleksei A. Leonov (left) and astronaut Thomas P. Stafford display the Apollo Soyuz Test Project (ASTP) commemorative plaque. The two commanders, of their respective crews, are in the Apollo Command Module (CM) trainer at Building 35 at NASA's Johnson Space Center (JSC). Two plaques divided into four quarters each will be flown on the ASTP mission. The American ASTP Apollo crew will carry the four United States quarter pieces aboard Apollo; and the Soviet ASTP Soyuz 19 crew will carry the four USSR quarter sections aboard Soyuz. The eight quarter pieces will be joined together to form two complete commemorative plaques after the two spacecraft rendezvous and dock in Earth orbit. One complete plaque then will be returned to Earth by the astronauts; and the other complete plaque will be brought back by the cosmonauts. The plaque is written in both English and Russian. The Apollo crew will consist of astronauts Thomas P. Stafford, commander; Donald K. "Deke" Slayton, docking module pilot; Vance D. Brand, command module pilot. The Soyuz 19 crew will consist of cosmonauts Aleksei A. Leonov, command pilot; and Valeri N. Kubasov, flight engineer.
Photographic copy of architectural drawing (original drawing located at the ...
Photographic copy of architectural drawing (original drawing located at the Panama Canal Commission Headquarters Building, Department of Engineering Vault, Balboa Heights, Republic of Panama). Rear elevation. - Quarry Heights, Officers' Quarters, Parkinson Lane, Balboa, Former Panama Canal Zone, CZ
Photographic copy of architectural drawing (original drawing located at the ...
Photographic copy of architectural drawing (original drawing located at the Panama Canal Commission Headquarters Building, Department of Engineering Vault, Balboa Heights, Republic of Panama). Longitudinal section. - Quarry Heights, Officers' Quarters, Parkinson Lane, Balboa, Former Panama Canal Zone, CZ
Photographic copy of architectural drawing (original drawing located at the ...
Photographic copy of architectural drawing (original drawing located at the Panama Canal Commission Headquarters Building, Department of Engineering Vault, Balboa Heights, Republic of Panama). First floor plan. - Quarry Heights, Officers' Quarters, Parkinson Lane, Balboa, Former Panama Canal Zone, CZ
Photographic copy of architectural drawing (original drawing located at the ...
Photographic copy of architectural drawing (original drawing located at the Panama Canal Commission Headquarters Building, Department of Engineering Vault, Balboa Heights, Republic of Panama). Front elevation. - Quarry Heights, Officers' Quarters, Parkinson Lane, Balboa, Former Panama Canal Zone, CZ
Photographic copy of architectural drawing (original drawing located at the ...
Photographic copy of architectural drawing (original drawing located at the Panama Canal Commission Headquarters Building, Department of Engineering Vault, Balboa Heights, Republic of Panama). Left side elevation. - Quarry Heights, Officers' Quarters, Parkinson Lane, Balboa, Former Panama Canal Zone, CZ
Photographic copy of architectural drawing (original drawing located at the ...
Photographic copy of architectural drawing (original drawing located at the Panama Canal Commission Headquarters Building, Department of Engineering Vault, Balboa Heights, Republic of Panama), Right side elevation. - Quarry Heights, Officers' Quarters, Parkinson Lane, Balboa, Former Panama Canal Zone, CZ
Photographic copy of architectural drawing (original drawing located at the ...
Photographic copy of architectural drawing (original drawing located at the Panama Canal Commission Headquarters Building, Department of Engineering Vault, Balboa Heights, Republic of Panama). Second floor plan. - Quarry Heights, Officers' Quarters, Parkinson Lane, Balboa, Former Panama Canal Zone, CZ
DOE Office of Scientific and Technical Information (OSTI.GOV)
Davis, G.; Mansur, D.L.; Ruhter, W.D.
1994-01-01
The Lawrence Livermore National Laboratory (LLNL) carries out safeguards and security activities for the Department of Energy (DOE), Office of Safeguards and Security (OSS), as well as other organizations, both within and outside the DOE. This document summarizes the activities conducted for the OSS during the first quarter of fiscal year 1994 (October through December, 1993). The nature and scope of the activities carried out for OSS at LLNL require a broad base of technical expertise. To assure projects are staffed and executed effectively, projects are conducted by the organization at LLNL best able to supply the needed technical expertise.more » These projects are developed and managed by senior program managers. Institutional oversight and coordination is provided through the LLNL Deputy Director`s office. At present, the Laboratory is supporting OSS in five areas: (1) Safeguards Technology, (2) Safeguards and Decision Support, (3) Computer Security, (4) DOE Automated Physical Security, and (5) DOE Automated Visitor Access Control System. This report describes the activities in each of these five areas. The information provided includes an introduction which briefly describes the activity, summary of major accomplishments, task descriptions with quarterly progress, summaries of milestones and deliverables and publications published this quarter.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Davis, G.; Mansur, D.L.; Ruhter, W.D.
The Lawrence Livermore National Laboratory (LLNL) carries out safeguards and security activities for the Department of Energy (DOE), Office of Safeguards and Security (OSS), as well as other organizations, both within and outside the DOE. This document summarizes the activities conducted for the OSS during the First Quarter of Fiscal Year 1997 (October through December, 1996). The nature and scope of the activities carried out for OSS at LLNL require a broad base of technical expertise. To assure projects are staffed and executed effectively, projects are conducted by the organization at LLNL best able to supply the needed technical expertise.more » These projects are developed and managed by senior program managers. Institutional oversight and coordination is provided through the LLNL Deputy Director`s office. At present, the Laboratory is supporting OSS in four areas: (1) safeguards technology; (2) safeguards and material accountability; (3) computer security--distributed systems; and (4) physical and personnel security support. The remainder of this report describes the activities in each of these four areas. The information provided includes an introduction which briefly describes the activity, summary of major accomplishments, task descriptions with quarterly progress, summaries of milestones and deliverables and publications published this quarter.« less
2013-03-21
Behind their Cosmonaut Hotel crew quarters in Baikonur, Kazakhstan, Expedition 35-36 Flight Engineer Alexander Misurkin (left), Soyuz Commander Pavel Vinogradov (center) and Flight Engineer Chris Cassidy of NASA (right) pose for pictures March 21 by a replica of a Russian Proton rocket as they train for launch to the International Space Station March 29, Kazakh time, in their Soyuz TMA-08M spacecraft from the Baikonur Cosmodrome for a 5 ½ month mission. NASA/Victor Zelentsov
FETC/EPRI Biomass Cofiring Cooperative Agreement. Quarterly technical report, April 1-June 30, 1997
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hughes, E.; Tillman, D.
1997-12-01
The FETC/EPRI Biomass Cofiring Program has accelerated the pace of cofiring development by increasing the testing activities plus the support activities for interpreting test results. Past tests conducted and analyzed include the Allen Fossil Plant and Seward Generating Station programs. On-going tests include the Colbert Fossil Plant precommercial test program, the Greenidge Station commercialization program, and the Blount St. Station switchgrass program. Tests in the formative stages included the NIPSCO cofiring test at Michigan City Generating Station. Analytical activities included modeling and related support functions required to analyze the cofiring test results, and to place those results into context. Amongmore » these activities is the fuel availability study in the Pittsburgh, PA area. This study, conducted for Duquesne Light, supports their initial investigation into reburn technology using wood waste as a fuel. This Quarterly Report, covering the third quarter of the FETC/EPRI Biomass Cofiring Program, highlights the progress made on the 16 projects funded under this cooperative agreement.« less
Evolution of Student Knowledge in a Traditional Introductory Classroom
NASA Astrophysics Data System (ADS)
Sayre, Eleanor C.; Heckler, Andrew F.
2008-10-01
In the physics education research community, a common format for evaluation is pre- and post-tests. In this study, we collect student test data many times throughout a course, allowing for the measurement of the changes of student knowledge with a time resolution on the order of a few days. The data cover the first two quarters (mechanics, E&M) of a calculus-based introductory sequence populated primarily by first- and second-year engineering majors. To avoid the possibility of test-retest effects, separate and quasi-random subpopulations of students are evaluated every week of the quarter on a variety of tasks. Unsurprisingly for a traditional introductory course, there is little change on many conceptual questions. However, the data suggest that some student ideas peak and decay rapidly during a quarter, a pattern consistent with memory research yet unmeasurable by pre-/post-testing.
Oil Bypass Filter Technology Evaluation - Third Quarterly Report, April--June 2003
DOE Office of Scientific and Technical Information (OSTI.GOV)
Laurence R. Zirker; James E. Francfort
2003-08-01
This Third Quarterly report details the ongoing fleet evaluation of an oil bypass filter technology by the Idaho National Engineering and Environmental Laboratory (INEEL) for the U.S. Department of Energy’s FreedomCAR & Vehicle Technologies Program. Eight full-size, four-cycle diesel-engine buses used to transport INEEL employees on various routes have been equipped with oil bypass filter systems from the PuraDYN Corporation. The reported engine lubricating oil-filtering capability (down to 0.1 microns) and additive package of the bypass filter system is intended to extend oil-drain intervals. To validate the extended oil-drain intervals, an oil-analysis regime monitors the presence of necessary additives inmore » the oil, detects undesirable contaminants and engine wear metals, and evaluates the fitness of the oil for continued service. The eight buses have accumulated 185,000 miles to date without any oil changes. The preliminary economic analysis suggests that the per bus payback point for the oil bypass filter technology should be between 108,000 miles when 74 gallons of oil use is avoided and 168,000 miles when 118 gallons of oil use is avoided. As discussed in the report, the variation in the payback point is dependant on the assumed cost of oil. In anticipation of also evaluating oil bypass systems on six Chevrolet Tahoe sport utility vehicles, the oil is being sampled on the six Tahoes to develop an oil characterization history for each engine.« less
Estimating procedure for major highway construction bid item cost : final report.
DOT National Transportation Integrated Search
1978-06-01
The present procedure for estimating construction bid item cost makes use of the quarterly weighted average unit price report coupled with engineering judgement. The limitation to this method is that this report format provides only the lowest bid da...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-09-04
... affecting the species (e.g., for an aquatic species, changes in water temperature or chemistry, flows, or... proposed Clean Water Act permit issued by the Army Corps of Engineers, a quarter-acre of wetlands composed...
Photographic copy of architectural drawing (original drawing located at the ...
Photographic copy of architectural drawing (original drawing located at the Panama Canal Commission Headquarters Building, Department of Engineering Vault, Balboa Heights, Republic of Panama). Details of bookshelves and pilasters. - Quarry Heights, Officers' Quarters, Parkinson Lane, Balboa, Former Panama Canal Zone, CZ
15. Photographic copy of sepia of original construction drawing dated ...
15. Photographic copy of sepia of original construction drawing dated September 15, 1938 (original sepia in plan room of Base Civil Engineer, Scott AFB) Elevations - Scott Air Force Base, General Officer Quarters, 229 Birchard Street, O'Fallon, St. Clair County, IL
Administrative Information Systems Plan for FY89
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1988-11-01
The Administrative Information Systems (AIS) Plan was developed to prioritize, track, and control the cost of AIS activities. This annually published plan, in conjunction with quarterly status reports, measures projected AIS activities and progress. The AIS Plan and quarterly reporting are administered jointly by the Director of Computing and an Organization 30 director. Priority development projects are clearly defined and closely managed efforts that consume significant resources. Directorate supplementals describe other AIS activity within each directorate, which may include: production support; technical support; development activity; and other AIS effort.
F-Area Acid/Caustic Basin groundwater monitoring report. First quarter 1995
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1995-06-01
During first quarter 1995, samples from the FAC monitoring wells at the F-Area Acid/Caustic Basin were collected and analyzed for herbicides/pesticides, indicator parameters, metals, nitrate, radionuclide indicators, volatile organic compounds, and other constituents. Piezometer FAC 5P and monitoring well FAC 6 were dry and could not be sampled. New monitoring wells FAC 9C, 10C, 11C, and 12C were completed in the Barnwell/McBean aquifer and were sampled for the first time during third quarter 1994 (first quarter 1995 is the third of four quarters of data required to support the closure of the basin). Analytical results that exceeded final Primary Drinkingmore » Water Standards (PDWS), other Savannah River Site (SRS) Flag 2 criteria, or the SRS turbidity standard of 50 NTU during the quarter were as follows: gross alpha exceeded the final PDWS and aluminum, iron, manganese, and total alpha-emitting radium exceeded the SRS Flag 2 criteria in one or more of the FAC wells. Turbidity exceeded the SRS standard (50 NTU) in wells FAC 3 and 11C. Groundwater flow direction and rate in the water table beneath the F-Area Acid/Caustic Basin were similar to past quarters.« less
2012-07-04
Outside their Cosmonaut Hotel crew quarters in Baikonur, Kazakhstan, Expedition 32 prime crew member Flight Engineer Sunita Williams of NASA (left) and backup Flight Engineer Tom Marshburn of NASA (right) raise the Stars and Stripes on the 4th of July, 2012 in a traditional flag-raising ceremony that was part of the pre-launch activities leading up to the launch of the next crew to the International Space Station. Williams, Soyuz Commander Yuri Malenchenko and Flight Engineer Aki Hoshide of the Japan Aerospace Exploration Agency will launch to the station July 15 from the Baikonur Cosmodrome in their Soyuz TMA-05M spacecraft. NASA/Victor Zelentsov
FE Yurchikhin poses for a photo with SonoCard
2010-06-25
ISS024-E-006664 (25 June 2010) --- With most of his body tucked away in a sleeping bag, Russian cosmonaut Fyodor Yurchikhin, Expedition 24 flight engineer, is pictured in his crew quarters compartment in the Zvezda Service Module of the International Space Station.
16. Photographic copy of sepia of original construction drawing dated ...
16. Photographic copy of sepia of original construction drawing dated September 15, 1938 (original sepia in plan room of Base Civil Engineer, Scott AFB) Interior details - Scott Air Force Base, General Officer Quarters, 229 Birchard Street, O'Fallon, St. Clair County, IL
17. Photographic copy of original remodeling drawings dated July 8, ...
17. Photographic copy of original remodeling drawings dated July 8, 1988 (original sepia in plan room of Base Civil Engineer, Scott AFB) First and second floor plans - Scott Air Force Base, General Officer Quarters, 229 Birchard Street, O'Fallon, St. Clair County, IL
Grazing incidence modeling of a metamaterial-inspired dual-resonance acoustic liner
NASA Astrophysics Data System (ADS)
Beck, Benjamin S.
2014-03-01
To reduce the noise emitted by commercial aircraft turbofan engines, the inlet and aft nacelle ducts are lined with acoustic absorbing structures called acoustic liners. Traditionally, these structures consist of a perforated facesheet bonded on top of a honeycomb core. These traditional perforate over honeycomb core (POHC) liners create an absorption spectra where the maximum absorption occurs at a frequency that is dictated by the depth of the honeycomb core; which acts as a quarter-wave resonator. Recent advances in turbofan engine design have increased the need for thin acoustic liners that are effective at low frequencies. One design that has been developed uses an acoustic metamaterial architecture to improve the low frequency absorption. Specifically, the liner consists of an array of Helmholtz resonators separated by quarter-wave volumes to create a dual-resonance acoustic liner. While previous work investigated the acoustic behavior under normal incidence, this paper outlines the modeling and predicted transmission loss and absorption of a dual-resonance acoustic metamaterial when subjected to grazing incidence sound.
Research and technology Fiscal Year 1985 report
NASA Technical Reports Server (NTRS)
Speer, F.
1985-01-01
A quarter of a century is but a moment on the cosmic calendar. Now that Marshall Space Flight Center has reached its 25th Anniversity, it seems just moments ago that President Dwight D. Eisenhower stood on these grounds and formally dedicated the George C. Marshall Space Flight Center in Huntsville, Alabama. The Fiscal Year 1985 Research and Technology Report reflects the wide spectrum of activities closely linked with the Center's mainstream spaceflight developments. Past accomplishments testify to the success of getting deeply involved in the science and technology of its projects - 32 Saturn launches, Pegasus, the Skylab missions, three High Energy Astronomy Observatory missions, the Apollo - Soyuz mission, and an accelerating schedule of successful Shuttle, Spacelab, and Shuttle payload missions. The Center continues to be involved in engineering development, scientific research, and technology. At the beginning of the second quarter century, the experience and dedication of the engineers and scientists, and the success of the collaboration with industry and academia will now be aimed at the next great endeavor, the Space Station.
2004-04-07
KENNEDY SPACE CENTER, FLA. -- Florida Gov. Jeb Bush expresses his support for the design of the new Florida quarter at its launch ceremony, held at the KSC Visitor Complex. The quarter celebrates Florida as the gateway to discovery -- a destination for explorers in the past, a launch site for space explorers of the future, and an inviting place for visitors today.
Apprentices and Trainees: March Quarter 2010. Terms and Definitions. Support Document
ERIC Educational Resources Information Center
National Centre for Vocational Education Research (NCVER), 2010
2010-01-01
This document covers the data terms used in the "Apprentices and Trainees: March quarter 2010" publication and its associated data tables. The primary purpose of this document is to assist users of the publication to understand the specific data terms used within it. Terms that appear in the publication are listed in alphabetical order…
Apprentices and Trainees: September Quarter 2010. Terms and Definitions. Support Document
ERIC Educational Resources Information Center
National Centre for Vocational Education Research (NCVER), 2011
2011-01-01
This document covers the data terms used in the "Apprentices and Trainees: September Quarter 2010" publication and its associated data tables. The primary purpose of this document is to assist users of the publication to understand the specific data terms used within it. Terms that appear in the publication are listed in alphabetical…
2013-05-22
Behind the Cosmonaut Hotel crew quarters in Baikonur, Kazakhstan, the Expedition 36/37 backup and prime crewmembers pose for pictures in front of a Proton rocket statue May 22 following traditional ceremonies. From left to right are backup Flight Engineer Koichi Wakata of the Japan Aerospace Exploration Agency, backup Soyuz Commander Mikhail Tyurin, backup Flight Engineer Rick Mastracchio of NASA, prime Flight Engineer Karen Nyberg of NASA, prime Soyuz Commander Fyodor Yurchikhin and prime Flight Engineer Luca Parmitano of the European Space Agency. Nyberg, Yurchikhin and Parmitano are preparing for their launch May 29, Kazakh time, in the Soyuz TMA-09M spacecraft to begin a 5 ½ month mission on the International Space Station. NASA/Victor Zelentsov
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1998-11-06
In support of the Weldon Spring Site Remedial Action Project Federal Facilities Agreement, a copy of the Quarterly Environmental Data Summary (QEDS) for the third quarter of 1998 is enclosed. The data presented in this letter and attachment constitute the QEDS. The data, except for air monitoring data and site KPA generated data (uranium analyses), were received from the contract laboratories, verified by the Weldon Spring Site verification group, and merged into the database during the third quarter of 1998. Air monitoring data presented are the most recent complete sets of quarterly data. Significant data, defined as data values thatmore » have exceeded defined above normal Level 2 values, are discussed in this letter for Environmental Monitoring Plan (EMP) generated data only. Above normal Level 2 values are based, in ES and H procedures, on historical high values, DOE Derived Concentration Guides (DCGs), NPDES limits, and other guidelines. The procedures also establish actions to be taken in the event that above normal data occur.« less
Collagen a natural scaffold for biology and engineering
USDA-ARS?s Scientific Manuscript database
Collagen, the most abundant protein in mammals, constitutes a quarter of the animal's total weight. The unique structure of fibrous collagens, a long triple helix that further associates into fibers, provides an insoluble scaffold that gives strength and form to the skin, tendons, bones, cornea and...
Applied Physics Modules Selected for Electrical and Electronic Technologies.
ERIC Educational Resources Information Center
Waring, Gene
Designed for individualized use in an applied physics course in postsecondary vocational-technical education, this series of twenty-three learning modules is equivalent to the content of two quarters of a five-credit hour class in electrical technology, electronic service technology, electronic engineering technology, or electromechanical…
Photographic copy of photograph, ca. 1924 (original print located in ...
Photographic copy of photograph, ca. 1924 (original print located in the Construction Inventory Book at the Directorate of Engineering and Housing, U.S. Army Garrison-Panama, Corozal, Republic of Panama). East front. - Quarry Heights, Officers' Quarters, Parkinson Lane, Balboa, Former Panama Canal Zone, CZ
Code of Federal Regulations, 2010 CFR
2010-04-01
... allocated to all Bureau operated and contract schools based on the number of square feet of floor space used... quarters shall be specifically excluded from the computation. (b) Square footage figures used in... Facilities Engineering. (c) In those cases, such as contract schools, where square footage figures are not...
Code of Federal Regulations, 2013 CFR
2013-04-01
... allocated to all Bureau operated and contract schools based on the number of square feet of floor space used... quarters shall be specifically excluded from the computation. (b) Square footage figures used in... Facilities Engineering. (c) In those cases, such as contract schools, where square footage figures are not...
Code of Federal Regulations, 2014 CFR
2014-04-01
... allocated to all Bureau operated and contract schools based on the number of square feet of floor space used... quarters shall be specifically excluded from the computation. (b) Square footage figures used in... Facilities Engineering. (c) In those cases, such as contract schools, where square footage figures are not...
Code of Federal Regulations, 2011 CFR
2011-04-01
... allocated to all Bureau operated and contract schools based on the number of square feet of floor space used... quarters shall be specifically excluded from the computation. (b) Square footage figures used in... Facilities Engineering. (c) In those cases, such as contract schools, where square footage figures are not...
Code of Federal Regulations, 2012 CFR
2012-04-01
... allocated to all Bureau operated and contract schools based on the number of square feet of floor space used... quarters shall be specifically excluded from the computation. (b) Square footage figures used in... Facilities Engineering. (c) In those cases, such as contract schools, where square footage figures are not...
14. Photographic copy of sepia of original construction drawing dated ...
14. Photographic copy of sepia of original construction drawing dated September 15, 1938 (Original sepia in plan room of Base Civil Engineer, Scott AFB) First and second floor plans - Scott Air Force Base, General Officer Quarters, 229 Birchard Street, O'Fallon, St. Clair County, IL
GENESIS 2: Advanced lunar outpost
NASA Technical Reports Server (NTRS)
Moore, Gary T.
1991-01-01
Advanced, second-generation lunar habitats for astronauts and mission specialists working on the Moon are investigated. The work was based on design constraints set forth in previous publications. Design recommendations are based on environmental response to the lunar environment, habitability, safety, near-term technology, replaceability and modularity, and suitability for NASA lunar research missions in the early 21st century. Scientists, engineers, and architects from NASA/JSC, Wisconsin aeronautical industry, and area universities gave technical input and offered critiques at design reviews throughout the process. The recommended design uses a lunar lava tube, with construction using a combination of Space Station Freedom-derived modules and lightweight Kevlar-laminate inflatables. The outpost includes research laboratories and biotron, crew quarters and support facility, mission control, health maintenance facility, and related areas for functional and psychological requirements. Furniture, specialized equipment, and lighting are included in the design analysis.
Strategies for Improving Diversity at Bell Labs, Lucent Technologies
NASA Astrophysics Data System (ADS)
Murray, Cherry A.
2001-03-01
Over the last quarter century, top management in Bell Labs Research has initiated efforts to train, recruit, and encourage underrepresented minorities into science and engineering positions, and in hiring and retaining underrepresented minority scientists and engineers. I will give some historical background of some of the programs which have worked over the years and some of the new programs in recruiting, mentoring and career planning that we have recently initiated in order to better create a workplace that is accepting and even welcoming of diversity.
Correlation between quarter-point angle and nuclear radius
NASA Astrophysics Data System (ADS)
Ma, Wei-Hu; Wang, Jian-Song; Mukherjee, S.; Wang, Qi; Patel, D.; Yang, Yan-Yun; Ma, Jun-Bing; Ma, Peng; Jin, Shi-Lun; Bai, Zhen; Liu, Xing-Quan
2017-04-01
The correlation between quarter-point angle of elastic scattering and nuclear matter radius is studied systematically. Various phenomenological formulae with parameters for nuclear radius are adopted and compared by fitting the experimental data of quarter point angle extracted from nuclear elastic scattering reaction systems. A parameterized formula related to binding energy is recommended, which gives a good reproduction of nuclear matter radii of halo nuclei. It indicates that the quarter-point angle of elastic scattering is quite sensitive to the nuclear matter radius and can be used to extract the nuclear matter radius. Supported by National Natural Science Foundation of China (U1432247, 11575256), National Basic Research Program of China (973 Program)(2014CB845405 and 2013CB83440x) and (SM) Chinese Academy of Sciences President’s International Fellowship Initiative (2015-FX-04)
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
Progress for this quarter is given for each of the following Center programs: (1) plutonium information resource; (2) advisory function (DOE and state support); (3) environmental, public health and safety; (3) communication, education, and training; and (4) nuclear and other material studies. Both summaries of the activities and detailed reports are included.
Q4 2016/Q1 2017 Solar Industry Update
DOE Office of Scientific and Technical Information (OSTI.GOV)
Margolis, Robert; Feldman, David; Boff, Daniel
2017-05-17
This technical presentation provides an update on the major trends that occurred in the solar industry in the fourth quarter of 2016 and the first quarter of 2017. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.
Apprentices and Trainees: December Quarter 2009: Terms and Definitions. Support Document
ERIC Educational Resources Information Center
National Centre for Vocational Education Research (NCVER), 2010
2010-01-01
This document covers the data terms used in the Apprentices and trainees December quarter 2009 report and its associated data tables. The primary purpose of this document is to assist users of the report to understand the specific data terms used within it. Terms that appear in the report are listed in alphabetical order with the following…
Apprentices and Trainees: September Quarter 2009. Terms and Definitions. Support Document
ERIC Educational Resources Information Center
National Centre for Vocational Education Research (NCVER), 2010
2010-01-01
This document covers the data terms used in the "Apprentices and trainees September" quarter 2009 report and its associated data tables. The primary purpose of this document is to assist users of the report to understand the specific data terms used within it. Terms that appear in the report are listed in alphabetical order with the following…
Science Policy Reviews, Volume 5 Number 1.
ERIC Educational Resources Information Center
Simons, Eugene M.
Presented in this quarterly publication are reviews, highlights, and 391 annotated bibliographic references from current and international literature in the area of science and public policy. The term "science" is used here to denote both engineering and technology as well as science. The literature reviewed includes books, reports, and periodical…
Science Policy Reviews, Volume 4 Number 4.
ERIC Educational Resources Information Center
Simons, Eugene M., Ed.
Presented in this quarterly publication are reviews, highlights, and 402 annotated bibliographic references from current and international literature in the area of science and public policy. The term "science" is used here to denote both engineering and technology as well as science. The literature reviewed includes books, reports, and periodical…
40 CFR 92.115 - Calibrations; frequency and overview.
Code of Federal Regulations, 2010 CFR
2010-07-01
... PROGRAMS (CONTINUED) CONTROL OF AIR POLLUTION FROM LOCOMOTIVES AND LOCOMOTIVE ENGINES Test Procedures § 92... calibration depending on the equipment and use). Exception: the water rejection ratio and the CO2 rejection ratio on all NDIR analyzers is only required to be performed quarterly. (c) At least monthly or after...
My Career and the "Rhetoric of" Technical Writing and Communication
ERIC Educational Resources Information Center
Schuster, Mary Lay
2015-01-01
This article traces the history of Mary Schuster's career in technical writing and communication from 1968 when she took a position in the Publications Department at the Institute of Electrical and Electronics Engineers (IEEE) to her work at "Technical Communication Quarterly" ("TCQ") in 2003 and forward. She discusses the…
Applied Physics Modules Selected for Manufacturing and Metal Technologies.
ERIC Educational Resources Information Center
Waring, Gene
Designed for individualized use in an applied physics course in postsecondary vocational-technical education, this series of eighteen learning modules is equivalent to the content of two quarters of a five-credit hour class in manufacturing engineering technology, machine tool and design technology, welding technology, and industrial plastics…
Gigabit Network Communications Research, Quarterly R and D Report Number 10
1993-03-01
operation of the Internet and the research and development activities of the Internet community. It features reports from the IAB, the Internet ... Research Task Force and its research groups, and the Internet Engineering Task Force and its working groups in addition to the reports from approximately 30
18. Photographic copy of original remodeling drawings dated July 8, ...
18. Photographic copy of original remodeling drawings dated July 8, 1988 (original sepia in plan room of Base Civil Engineer, Scott AFB) First and second floor demolition and framing plan - Scott Air Force Base, General Officer Quarters, 229 Birchard Street, O'Fallon, St. Clair County, IL
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1993-11-01
This document is a brief progress report from each of the research and education projects that are currently funded through the ERWM contract. During third quarter 1993, approval was given by DOE for purchase of equipment. Equipment purchases were initiated and much of the equipment has been received and installed. The committees in charge of coordination of sampling and analyses associated with the collaborative research groups continued to meet and address these issues. Sampling has been done in the lower part of Devil`s Swamp and in the Devil`s Swamp Lake area. In addition, extensive sampling has been done in Bayoumore » Trepagnier and in Bayou St. John. During this period, Tulane and Xavier Universities continued working closely with Oak Ridge National Laboratories (ORNL). The ORNL 1993 summer student internship program was completed. Plans were made for expanding the program to support 8 students next summer. Leonard Price, a Xavier University Chemistry professor and John Walz, a Tulane University Engineering professor each spent 5 weeks at ORNL. During this time these faculty worked with ORNL researchers exploring mutual interests and discussing possible future collaborations. In September, Drs. Carl Gehrs, Lee Shugart and Marshall Adams of ORNL, visited the Tulane and Xavier campuses. They presented two seminars and met with several of the investigators being supported by the ERWM contract. Tulane/Xavier project administrators participated in the Office of Technology Development`s ``New Technologies and Program Exhibition`` in the Rayburn House Office Building on September 23 and in the Hart Senate Office Building on September 27.« less
NASA Technical Reports Server (NTRS)
Kiser, James D.; Bansal, Narottam P.; Szelagowski, J.; Sokhey, J.; Heffernan, T.; Clegg, J.; Pierluissi, A.; Riedell, J.; Atmur, S.; Wyen, T.;
2015-01-01
Rolls-Royce North American Technologies, Inc. (LibertyWorksLW) began considering the development of CMC exhaust forced mixers in 2008, as a means of obtaining reduced weight and hotter operating temperature capability, while minimizing shape distortion during operation, which would improve mixing efficiency and reduce fuel burn. Increased component durability, enhanced ability to fabricate complex-shaped components, and engine noise reduction are other potential advantages of CMC mixers (compared to metallic mixers). In 2010, NASA was pursuing the reduction of NOx emissions, fuel burn, and noise from turbine engines in Phase I of the Environmentally Responsible Aviation (ERA) Project. ERA subtasks, including those focused on CMC components, were formulated with the goal of maturing technology from proof of concept validation (TRL 3) to a systemsubsystem or prototype demonstration in a relevant environment (TRL 6). In April 2010, the NASA Glenn Research Center (GRC) and LibertyWorks jointly initiated a CMC Exhaust System Validation Program within the ERA Project, teaming on CMC exhaust mixer development for subsonic jet engines capable of operating with increased performance. Our initial focus was on designing, fabricating, and characterizing the thrust and acoustic performance of a roughly quarter-scale 16-lobe oxide oxide CMC mixer and tail cone along with a conventional low bypass exhaust nozzle. Support Services, LLC (Allendale, MI) and ATK COI Ceramics, Inc. (COIC, in San Diego, CA) supported the design of a subscale nozzle assembly that consisted of an oxide oxide CMC mixer and center body, with each component mounted on a metallic attachment ring. That design was based upon the operating conditions a mixer would experience in a turbofan engine. Validation of the aerodynamic and acoustic performance of the subscale mixer via testing and the achievement of TRL 4 encouraged the NASALWCOIC team to move to the next phase where a full scale CMC mixer sized for a RR AE3007 engine and a compatible attachment flange were designed, followed by CMC component fabrication by COIC, and vibration testing at GRC under conditions simulating the structural and dynamic environment encountered during engine operation. AFRL (WPAFB) supported this testing by performing 3D laser vibrometry to identify the mixer mode shapes and modal frequencies. The successful fabrication and testing of such a component has been achieved. The CMC mixer demonstrated good durability during vibration testing at room and elevated temperature (TRL5). This has cleared the article for a ground-based test on a Rolls-Royce AE3007 engine, where the performance and benefits of the component can be further assessed.
UTILIZATION OF LOW NOx COAL COMBUSTION BY-PRODUCTS
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
1999-07-01
The project has switched focus this quarter from pilot plant operations to product testing. Last quarter extensive pilot plant work had occurred and testing objectives had been met. Also last quarter technology demonstrations were also performed for Potomac Electric Power, Virginia Power, and Wisconsin Electric. We had reported that groundbreaking for the PEPCo fly ash treatment facility was to begin in August. Recent conversations with the technology's licensee, Mineral Resource Technology, have resulted in changes. Long term contract negotiations between MRT and Potomac Electric Power have caused delays. Most recent estimates are that contract negotiations should be finished in August,more » detailed engineering is to begin in September, and groundbreaking to begin in early Spring. The commercialization of the technology is going forward, just not as fast as we or MRT had anticipated. As this is being written we have received inquiries from Plastics Technology Magazine about fly ash utilization in plastics. We are anticipating working with one of their editors to provide an upcoming article.« less
Advanced Combustion Numerics and Modeling - FY18 First Quarter Report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Whitesides, R. A.; Killingsworth, N. J.; McNenly, M. J.
This project is focused on early stage research and development of numerical methods and models to improve advanced engine combustion concepts and systems. The current focus is on development of new mathematics and algorithms to reduce the time to solution for advanced combustion engine design using detailed fuel chemistry. The research is prioritized towards the most time-consuming workflow bottlenecks (computer and human) and accuracy gaps that slow ACS program members. Zero-RK, the fast and accurate chemical kinetics solver software developed in this project, is central to the research efforts and continues to be developed to address the current and emergingmore » needs of the engine designers, engine modelers and fuel mechanism developers.« less
Hirsch, Penny L; Yarnoff, Charles
2011-01-01
The required course for freshmen in Northwestern University's engineering school - a 2-quarter sequence called Engineering Design and Communication (EDC) - is noteworthy not only for its project-based focus on user-centered design, but also for its innovative integrated approach to teaching communication, teamwork, and ethics. Thanks to the collaboration between EDC faculty and staff at the Rehabilitation Institute of Chicago, EDC students, at the beginning of their education, experience the excitement of solving problems for real clients and users. At the same time, these authentic design projects offer an ideal setting for teaching students how to communicate effectively to different audiences and perform productively as team members and future leaders in engineering.
The IPS supported employment learning collaborative.
Becker, Deborah R; Drake, Robert E; Bond, Gary R
2014-06-01
Learning collaboratives aim to improve the quality and outcomes of health care. This paper updates the Johnson & Johnson-Dartmouth Community Mental Health Program, a 12-year learning collaborative on supported employment for people with mental illness. We gathered data from quarterly employment reports, monthly Individual Placement and Support (IPS) meetings, and presentations at the 2013 annual meeting of the learning collaborative. The number of participant states or regions (and sites within these jurisdictions) was expanded to 16 jurisdictions in the United States and 3 in European countries. The quarterly rate of competitive employment has averaged 43% over 11 years in the U.S. sites. The collaborative has spawned numerous interactions, trainings, innovations, and research projects. Long-term learning collaboratives can produce high quality services, good outcomes, sustainability, and innovation.
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
This report summarizes activities of the Amarillo National Resource Center for Plutonium during the quarter. The report describes the Electronic Resource Library; DOE support activities; current and future environmental health and safety programs; pollution prevention and pollution avoidance; communication, education, training, and community involvement programs; and nuclear and other material studies, including plutonium storage and disposition studies.
Hurricane Sandy (New Jersey): Mortality Rates in the Following Month and Quarter.
Kim, Soyeon; Kulkarni, Prathit A; Rajan, Mangala; Thomas, Pauline; Tsai, Stella; Tan, Christina; Davidow, Amy
2017-08-01
To describe changes in mortality after Hurricane Sandy made landfall in New Jersey on October 29, 2012. We used electronic death records to describe changes in all-cause and cause-specific mortality overall, in persons aged 76 years or older, and by 3 Sandy impact levels for the month and quarter following Hurricane Sandy compared with the same periods in earlier years adjusted for trends. All-cause mortality increased 6% (95% confidence interval [CI] = 2%, 11%) for the month, 5%, 8%, and 12% by increasing Sandy impact level; and 7% (95% CI = 5%, 10%) for the quarter, 5%, 8%, and 15% by increasing Sandy impact level. In elderly persons, all-cause mortality rates increased 10% (95% CI = 5%, 15%) and 13% (95% CI = 10%, 16%) in the month and quarter, respectively. Deaths that were cardiovascular disease-related increased by 6% in both periods, noninfectious respiratory disease-related by 24% in the quarter, infection-related by 20% in the quarter, and unintentional injury-related by 23% in the month. Mortality increased, heterogeneous by cause, for both periods after Hurricane Sandy, particularly in communities more severely affected and in the elderly, who may benefit from supportive services.
An investigation of transitional management problems for the NSTS at NASA
NASA Technical Reports Server (NTRS)
Hunsucker, John
1988-01-01
This quarterly report summarizes the ideas and concepts developed by the University of Houston team with the collaboration and support of the Management Integration Offices of NASA. In addition it is hoped that this report will help to stimulate the healthy problem solving process already present at NASA. This is the second report in the fourth year of the research contract. The main aim of the work is to assist the National Space Transportation System (NSTS) in finding ways and means of moving into a truly operational era in the sense of routine timely production of flights. The reader who seeks an understanding of the concepts presented is encouraged to read the reports of the last three years. The overall strategy of this effort is to: (1) search the literature for applications of transition management and other related issues, (2) conduct investigations into the experiences of the industries with the transition management, and (3) to adapt the information found in (1) and (2) above into a form useful to NASA while at the same time applying industrial engineering and engineering management expertise to problems and issues as they emerge.
Minimizing Losses in a Space Laser Power Beaming System
2010-03-01
system was to inefficient for any practical power transfer applications ( Reiman , 1993:2). Shorter wavelengths are easier to direct and have led to the...OH. Winter Quarter 2009 Reiman , D. "Scanning the Past: A History of Electrical Engineering from the Past." n. pag. IEEE (Vol. 81, No. 6, 1993
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mankin, C.J.; Banken, M.K.
The Oklahoma Geological Survey (OGS), the Geological Information Systems department, and the School of Petroleum and Geological Engineering at the University of Oklahoma are engaging in a program to identify and address Oklahoma`s oil recovery opportunities in fluvial-dominated deltaic (FDD) reservoirs. This program includes the systematic and comprehensive collection and evaluation of information on all of Oklahoma`s FDD reservoirs and the recovery technologies that have been (or could be) applied to those reservoirs with commercial success. This data collection and evaluation effort will be the foundation for an aggressive, multifaceted technology transfer program that is designed to support all ofmore » Oklahoma`s oil industry, with particular emphasis on smaller companies and independent operators in their attempts to maximize the economic producibility of FDD reservoirs.« less
Results for the Fourth Quarter Calendar Year 2015 Tank 50H Salt Solution Sample
DOE Office of Scientific and Technical Information (OSTI.GOV)
Crawford, C.
In this memorandum, the chemical and radionuclide contaminant results from the Fourth Quarter Calendar Year 2015 (CY15) sample of Tank 50H salt solution are presented in tabulated form. The Fourth Quarter CY15 Tank 50H samples were obtained on October 29, 2015 and received at Savannah River National Laboratory (SRNL) on October 30, 2015. The information from this characterization will be used by Defense Waste Processing Facility (DWPF) & Saltstone Facility Engineering for the transfer of aqueous waste from Tank 50H to the Salt Feed Tank in the Saltstone Production Facility, where the waste will be treated and disposed of inmore » the Saltstone Disposal Facility. This memorandum compares results, where applicable, to Saltstone Waste Acceptance Criteria (WAC) limits and targets. Data pertaining to the regulatory limits for Resource Conservation and Recovery Act (RCRA) metals will be documented at a later time per the Task Technical and Quality Assurance Plan (TTQAP) for the Tank 50H saltstone task. The chemical and radionuclide contaminant results from the characterization of the Fourth Quarter Calendar Year 2015 (CY15) sampling of Tank 50H were requested by SRR personnel and details of the testing are presented in the SRNL Task Technical and Quality Assurance Plan.« less
BIOMASS REBURNING - MODELING/ENGINEERING STUDIES
DOE Office of Scientific and Technical Information (OSTI.GOV)
Vladimir Zamansky; Chris Lindsey; Vitali Lissianski
This project is designed to develop engineering and modeling tools for a family of NO{sub x} control technologies utilizing biomass as a reburning fuel. During the ninth reporting period (September 27--December 31, 1999), EER prepared a paper Kinetic Model of Biomass Reburning and submitted it for publication and presentation at the 28th Symposium (International) on Combustion, University of Edinburgh, Scotland, July 30--August 4, 2000. Antares Group Inc, under contract to Niagara Mohawk Power Corporation, evaluated the economic feasibility of biomass reburning options for Dunkirk Station. A preliminary report is included in this quarterly report.
2014-05-21
11-56-02-4: At the Cosmonaut Hotel crew quarters in Baikonur, Kazakhstan, Expedition 40/41 Flight Engineer Reid Wiseman of NASA takes a ride in a spinning chair May 21 as he tests his vestibular system during pre-launch medical tests. Wiseman, Soyuz Commander Max Suraev of the Russian Federal Space Agency (Roscosmos) and Flight Engineer Alexander Gerst of the European Space Agency will launch on May 29, Kazakh time, on the Soyuz TMA-13M spacecraft from the Baikonur Cosmodrome for a 5 ½ month mission on the International Space Station. NASA/Victor Zelentsov
2014-05-21
11-57-29-2: At the Cosmonaut Hotel crew quarters in Baikonur, Kazakhstan, Expedition 40/41 Flight Engineer Alexander Gerst of the European Space Agency takes a turn on a tilt table May 21 as he tests his vestibular system during pre-launch medical tests. Gerst, Soyuz Commander Max Suraev of the Russian Federal Space Agency (Roscosmos) and Flight Engineer Reid Wiseman of NASA will launch on May 29, Kazakh time, on the Soyuz TMA-13M spacecraft from the Baikonur Cosmodrome for a 5 ½ month mission on the International Space Station. NASA/Victor Zelentsov
NASA Technical Reports Server (NTRS)
Grissom, D. S.; Schneider, W. C.
1971-01-01
The determination of a base line (minimum weight) design for the primary structure of the living quarters modules in an earth-orbiting space base was investigated. Although the design is preliminary in nature, the supporting analysis is sufficiently thorough to provide a reasonably accurate weight estimate of the major components that are considered to comprise the structural weight of the space base.
Joint Force Quarterly, Issue 49, 2nd Quarter 2008: Focus on Airpower
2008-04-01
that the next space age will produce wealth (from tourism , energy, mining, and manufacturing) is correct, “the next space age will be marked by a...wealth frontiers include tourism , energy, mining, and manu- facturing. Beyond the impact that space has in supporting earthly economic enterprises, the... tourism , military exchanges, student scholarships, partner city programs, and unrestricted mutual media access and transparency. In sum, we will
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
The Quarterly Environmental Data Summary (QEDS) for the fourth quarter of 1997 is prepared in support of the Weldon Spring Site Remedial Action Project Federal Facilities Agreement. The data presented constitute the QEDS. The data were received from the contract laboratories, verified by the Weldon Spring Site verification group and, except for air monitoring data and site KPA generated data (uranium analyses), merged into the data base during the fourth quarter of 1997. Air monitoring data presented are the most recent complete sets of quarterly data. Air data are not stored in the data base and KPA data are notmore » merged into the regular data base. Significant data, defined as data values that have exceeded defined ``above normal`` level 2 values, are discussed in this letter for Environmental Monitoring Plan (EMP) generated data only. Above normal level 2 values are based, in ES and H procedures, on historical high values, DOE Derived Concentration Guides (DCGs), NPDES limits and other guidelines. The procedures also establish actions to be taken in response to such data. Data received and verified during the fourth quarter were within a permissible range of variability except for those which are detailed.« less
Durability Testing of Commercial Ceramic Materials
NASA Technical Reports Server (NTRS)
Schienle, J. L.
1996-01-01
Technical efforts by AlliedSignal Engines in DOE/NASA-funded project from February, 1978 through December, 1995 are reported in the fields ceramic materials for gas turbine engines and cyclic thermal durability testing. A total of 29 materials were evaluated in 40 cyclic oxidation exposure durability tests. Ceramic test bars were cyclically thermally exposed to a hot combustion environment at temperatures up to 1371 C (2500 F) for periods of up to 3500 hours, simulating conditions typically encountered by hot flowpath components in an automotive gas turbine engine. Before and after exposure, quarter-point flexure strength tests were performed on the specimens, and fractography examinations including scanning electron microscopy (SEM) were performed to determine failure origins.
Internal Arrangement of Skylab Workshop Crew Quarters
NASA Technical Reports Server (NTRS)
1972-01-01
This image depicts a layout of the Skylab workshop 1-G trainer crew quarters. At left, in the sleep compartment, astronauts slept strapped to the walls of cubicles and showered at the center. Next right was the waste management area where wastes were processed and disposed. Upper right was the wardroom where astronauts prepared their meals and foods were stored. In the experiment operation area, upper left, against the far wall, was the lower-body negative-pressure device (Skylab Experiment M092) and the Ergometer for the vectorcardiogram experiment (Skylab Experiment M063). The trainers and mockups were useful in the developmental phase, while engineers and astronauts were still working out optimum designs. They provided much data applicable to the manufacture of the flight articles.
NASA Multipoint LDI Development
NASA Technical Reports Server (NTRS)
Tacina, Robert
2001-01-01
Multipoint Lean-Direct-Injection (LDI) is a combustor concept in which a large number of fuel injectors and fuel-air mixers are used to quickly and uniformly mix the fuel and air so that ultralow levels of NO, are produced. Each fuel injector has an air swirler associated with it for fuel-air mixing and to establish a small recirculation and burning zone. A concept in which there are 36 fuel injectors in the space of a conventional single fuel injector has been tested in a flame tube. A greater than 80 percent reduction in NO, at high power conditions (400 psia, 1000 "Finlet) was achieved. Alternate concepts with 9,25,36 or 49 fuel injectors are being investigated in flame tube tests for their low NO, potential and with fuel staging to improve the turn-down ratio at low power conditions. A preliminary sector concept of a large engine design has been successfully tested at inlet conditions of 700 psia and 1100 O F . This concept had one half the number of fuel injectors per square inch as the flame tube configuration with 36 fuel injectors, and the NO, reduction was 65 percent of the ICAO standard. Future regional engine size sector tests are planned for the 2nd quarter of FY02 and large engine size sector tests for the 1st quarter of FY03.
Joint Force Quarterly. Issue 65, 2nd Quarter 2012
2012-04-01
but other times misfortune arrives unan- nounced. Strong organizations build on the mutual support of every member of the unit. This is the essence of...devote themselves to putting themselves into others’ heads. They concen- trate on boring down to a character’s essence , stripping away pretext to...style ‘ jasmine revolution’ circulated on the internet.”17 A postscript on developments in Libya makes clear that economic deprivation is at the
The Open Door, A Quarterly Journal of the North Carolina Department of Community Colleges.
ERIC Educational Resources Information Center
The Open Door, 1968
1968-01-01
This issue contains articles on the state's opportunities in technical education and the need for making them known to more students, teachers, and counselors. The contents are: (1) an editorial on the success and satisfactions of engineering technology graduates; (2) the place of the technician in industry, a description of courses available, and…
8. Photocopy of architectural drawing (from blueprint at Fort Myer ...
8. Photocopy of architectural drawing (from blueprint at Fort Myer Engineer Activity) 'Double set of Non-Commissioned Officers Qrs.' Quartermaster Generals Office, sheets 2 and 3, standard plan 23, June 1891, Lithographed on linen architectural drawing. 1 PLAN, 3 ELEVATIONS - Fort Myer, Non-Commissioned Officers Quarters, Washington Avenue between Johnson Lane & Custer Road, Arlington, Arlington County, VA
Internationalization of U.S. Doctorate Education. NBER Working Paper No. 14792
ERIC Educational Resources Information Center
Bound, John; Turner, Sarah; Walsh, Patrick
2009-01-01
The representation of a large number of students born outside the United States among the ranks of doctorate recipients from U.S. universities is one of the most significant transformations in U.S. graduate education and the international market for highly-trained workers in science and engineering in the last quarter century. Students from…
Space Shuttle main engine product improvement
NASA Technical Reports Server (NTRS)
Lucci, A. D.; Klatt, F. P.
1985-01-01
The current design of the Space Shuttle Main Engine has passed 11 certification cycles, amassed approximately a quarter million seconds of engine test time in 1200 tests and successfully launched the Space Shuttle 17 times of 51 engine launches through May 1985. Building on this extensive background, two development programs are underway at Rocketdyne to improve the flow of hot gas through the powerhead and evaluate the changes to increase the performance margins in the engine. These two programs, called Phase II+ and Technology Test Bed Precursor program are described. Phase II+ develops a two-tube hot-gas manifold that improves the component environment. The Precursor program will evaluate a larger throat main combustion chamber, conduct combustion stability testing of a baffleless main injector, fabricate an experimental weld-free heat exchanger tube, fabricate and test a high pressure oxidizer turbopump with an improved inlet, and develop and test methods for reducing temperature transients at start and shutdown.
ERIC Educational Resources Information Center
Budke, Wesley E., Comp.; Gordon, Ruth, Comp.
This compilation presents abstracts of 221 new and continuing projects funded by the Division of Research and Demonstration (USOE/BOAE) in fiscal year 1976 and the transition quarter (July 1 - September 30, 1976). Following a narrative introduction and list of project titles, the abstracts are arranged alphabetically by State within each of the…
2014-05-21
11-52-21: At the Cosmonaut Hotel crew quarters in Baikonur, Kazakhstan, Expedition 40/41 Soyuz Commander Max Suraev of the Russian Federal Space Agency (Roscosmos, left) and NASA Flight Engineer Reid Wiseman (right) try their hand at a game of Ping-Pong May 21 as they head into the homestretch of their pre-launch training. Suraev, Wiseman and Flight Engineer Alexander Gerst of the European Space Agency (right) will launch on May 29, Kazakh time, on the Soyuz TMA-13M spacecraft from the Baikonur Cosmodrome for a 5 ½ month mission on the International Space Station. NASA/Victor Zelentsov
Trojan, A; Nickel, S
2008-12-01
Capacity building is regarded as an intermediate outcome and success parameter for community health promotion and empowerment. The first aim of the study was the development and examination of a tool to measure capacity building in the context of a programme of health promotion for children and parents in a socially disadvantaged quarter in Hamburg (about 3000 residents, 60% with migration background). The second aim was to measure capacity building within a period of five years. A survey was carried out with 27 professionals from the health and social field. Dimensions of the instrument were: citizen participation, local leadership, available resources, networking and co-operation, support of residents. At the same time, we tested to what extent the instrument is suitable for resident surveys. Furthermore, pretest instrument and results were discussed with our advisory board regarding potential improvements. The result of the project, in addition to its practical use in the quarter, consists of the generation of a psychometrically tested instrument to measure capacity building. Furthermore, the experience contributed to the expertise on how such a study can be conducted. A comparison of the situation in 2006 with the situation in 2001 showed considerable improvements in all dimensions of capacity building in the quarter. Establishing the instrument on a long-term basis calls for more intensive examination not only of the chances, but also the limitations of the tool. We mainly attribute the overall positive picture that was gained within a period of five years to the generally supportive climate of development in the quarter as well as to the strong and continuous commitment of individual persons involved.
9. Photocopy of architectural drawing (from blueprint at Fort Myer ...
9. Photocopy of architectural drawing (from blueprint at Fort Myer Engineer Activity) 'Double Set of Non-Commissioned Officers Qrs.' Quartermaster Generals Office, sheet 1 and unnumbered sheet, standard plan 23, June 1891. lithograph on linen architectural drawing 2. PLANS, 1 SECTION, 2 DETAILS - Fort Myer, Non-Commissioned Officers Quarters, Washington Avenue between Johnson Lane & Custer Road, Arlington, Arlington County, VA
ERIC Educational Resources Information Center
Weaver, Marisa G.; Samoshin, Andrey V.; Lewis, Robert B.; Gainer, Morgan J.
2016-01-01
A course is described where students are engaged in an inquiry-based quarter-long research project to synthesize a known pharmaceutical target. Students use literature search engines, such as Reaxys and SciFinder, and the primary chemical literature as resources to plan and perform the synthesis of their pharmaceutical target. Through this…
SUSTAINABLE ALLOY DESIGN: SEARCHING FOR RARE EARTH ELEMENT ALTERNATIVES THROUGH CRYSTAL ENGINEERING
2016-02-26
Property Maps to Guide Materials Design via Statistical Learning Summer Research Group Meeting – Materials by Design Los Alamos National Laboratory, July...Informatics, Rational design , Quantitative correlative spectroscopy and imaging, DFT, In situ high pressure mechanical property measurements, Superalloy...final, technical, interim, memorandum, master’s thesis, progress, quarterly, research , special, group study, etc. 3. DATES COVERED. Indicate the
Publications of the Jet Propulsion Laboratory 1989
NASA Technical Reports Server (NTRS)
1990-01-01
This bibliography describes and indexes by primary author the externally distributed technical reporting, released during 1989, that resulted from scientific and engineering work performed, or managed, by JPL. Three classes of publications are included: JPL publications in which the information is complete for a specific accomplishment; articles from the quarterly Telecommunications and Data Acquisition (TDA) Progress Report; and articles published in the open literature.
F-Area Acid/Caustic Basin groundwater monitoring report. Second quarter 1995
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1995-09-01
During second quarter 1995, samples from the FAC monitoring wells at the F-Area Acid/Caustic Basin were collected and analyzed for herbicides/pesticides, indicator parameters, metals, nitrate, radionuclide indicators, volatile organic compounds, and other constituents. Piezometer FAC 5P and monitoring well FAC 6 were dry and could not be sampled. New monitoring wells FAC 9C, 10C, 11C, and 12C were completed in the Barnwell/McBean aquifer and were sampled for the first time during third quarter 1994 (second quarter 1995 is the fourth of four quarters of data required to support the closure of the basin). Analytical results that exceeded final Primary Drinkingmore » Water Standards (PDWS) or Savannah River Site (SRS) Flag 2 criteria such as the SRS turbidity standard of 50 NTU during the quarter were as follows: gross alpha exceeded the final PDWS and aluminum, iron, manganese, and radium-226 exceeded the SRS Flag 2 criteria in one or more of the FAC wells. Turbidity exceeded the SRS standard (50 NTU) in well FAC 3. Groundwater flow direction in the water table beneath the F-Area Acid/Caustic Basin was to the west at a rate of 1300 feet per year. Groundwater flow in the Barnwell/McBean was to the northeast at a rate of 50 feet per year.« less
Fatal musculoskeletal injuries of Quarter Horse racehorses: 314 cases (1990-2007).
Sarrafian, Tiffany L; Case, James T; Kinde, Hailu; Daft, Barbara M; Read, Deryck H; Moore, Janet D; Uzal, Francisco A; Stover, Susan M
2012-10-01
To determine major causes of death and the anatomic location of musculoskeletal injuries in Quarter Horse racehorses in California. Retrospective case series. 314 Quarter Horse racehorses with musculoskeletal injuries that were necropsied through the California Horse Racing Board Postmortem Program from 1990 to 2007. Postmortem pathology reports were retrospectively reviewed. Musculoskeletal injuries were categorized by anatomic region and described. The number of Quarter Horse starts and starters for the same period of time were obtained from a commercial database for determination of fatal injury incidence. Musculoskeletal injuries accounted for 314 of the 443 (71 %) Quarter Horse racehorses that died during the 18-year study period. Fatal musculoskeletal injuries occurred at a rate of 2.0 deaths/1,000 race starts and 18.6 deaths/1,000 horses that started a race. Musculoskeletal injuries occurred predominantly during racing (84%) and in the forelimbs (81%). The most common fatal musculoskeletal injuries were metacarpophalangeal and metatarsophalangeal joint (fetlock) support injuries (40%) and carpal (24%), vertebral (10%), and scapular (8%) fractures. Proximal interphalangeal (pastern) joint luxations resulted in death of 3% of horses. Fracture configurations of some bones were consistent with those of Thoroughbred racehorses. Evidence of preexisting stress remodeling of bone was reported for some fractures. Knowledge of common locations and types of fatal musculoskeletal injuries in racing Quarter Horses may enhance practitioners' ability to detect mild injuries early, rest horses, and help prevent catastrophic injuries.
Impact of performance-based financing on primary health care services in Haiti.
Zeng, Wu; Cros, Marion; Wright, Katherine D; Shepard, Donald S
2013-09-01
To strengthen Haiti's primary health care (PHC) system, the country first piloted performance-based financing (PBF) in 1999 and subsequently expanded the approach to most internationally funded non-government organizations. PBF complements support (training and technical assistance). This study evaluates (a) the separate impact of PBF and international support on PHC's service delivery; (b) the combined impact of PBF and technical assistance on PHC's service delivery; and (c) the costs of PBF implementation in Haiti. To minimize the risk of facilities neglecting potential non-incentivized services, the incentivized indicators were randomly chosen at the end of each year. We obtained quantities of key services from four departments for 217 health centres (15 with PBF and 202 without) from 2008 through 2010, computed quarterly growth rates and analysed the results using a difference-in-differences approach by comparing the growth of incentivized and non-incentivized services between PBF and non-PBF facilities. To interpret the statistical analyses, we also interviewed staff in four facilities. Whereas international support added 39% to base costs of PHC, incentive payments added only 6%. Support alone increased the quantities of PHC services over 3 years by 35% (2.7%/quarter). However, support plus incentives increased these amounts by 87% over 3 years (5.7%/quarter) compared with facilities with neither input. Incentives alone was associated with a net 39% increase over this period, and more than doubled the growth of services (P < 0.05). Interview findings found no adverse impacts and, in fact, indicated beneficial impacts on quality. Incentives proved to be a relatively inexpensive, well accepted and very effective complement to support, suggesting that a small amount of money, strategically used, can substantially improve PHC. Haiti's experience, after more than a decade of use, indicates that incentives are an effective tool to strengthen PHC.
Johnson, Eric G; Godges, Joseph J; Lohman, Everett B; Stephens, Joni A; Zimmerman, Grenith J; Anderson, Sharon P
2003-01-01
The purpose of this pilot study was to compare disability self-assessment and upper quarter muscle balance female dental hygienists and non dental hygienist females. The upper quarter was operationally defined as the shoulder and neck region. Muscle balance was operationally defined as muscle flexibility and muscle performance. A convenience sample of 41 working dental hygienists and 46 non dental hygienists participated in the study. Muscle flexibility of the upper quarter was measured by inclinometry or standard muscle length testing. Muscle performance was measured by timing the duration of four statically maintained positions. Subjects filled out the Northwick Park Neck Pain Questionnaire (NPNPQ), which is a disability self-assessment. Analysis of Covariance (ANCOVA) was used during data analysis to adjust for the mean age difference between the dental hygienist group (38.0 years) and the non-dental hygienist group (29.3 years). The results of this pilot study suggest that female dental hygienists are more likely than non dental hygienist females to develop tightness in the upper trapezius (p = 0.007) and the levator scapula (p = 0.01) of the non dominant upper quarter and lower fibers of the pectoralis major of the dominant upper quarter (p = 0.03) Muscle performance trends in the dental hygienist group supported muscle balance theory that short muscles remain strong while lengthened muscles become weak. The dental hygienist group had higher disability scores in all nine parts of the NPNPQ compared to the non-dental hygienist group, five of which were statistically significant (p < 0.05). The results of this pilot study suggest that muscle imbalances in the upper quarter are more common in female dental hygienists than in female non dental hygienists and may contribute to the numerous upper quarter pathologies associated with the practice of dental hygiene. Further research is needed to determine if upper quarter strengthening and flexibility exercises performed by dental hygienists can reduce disability self-assessment.
Quarterly environmental data summary for first quarter 1998
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1998-05-01
In support of the Weldon Spring Site Remedial Action Project Federal Facilities Agreement, a copy of the Quarterly Environmental Data Summary (QEDS) for the first quarter of 1998 is enclosed. The data presented in this letter and attachment constitute the QEDS. The data were received from the contract laboratories, verified by the Weldon Spring Site verification group and, except for air monitoring data and site KPA generated data (uranium analyses), merged into the data base during the first quarter of 1998. Air monitoring data presented are the most recent complete sets of quarterly data. Air data are not stored inmore » the data base, and KPA data are not merged into the regular data base. Significant data, defined as data values that have exceeded defined {open_quotes}above normal{close_quotes} Level 2 values, are discussed in this letter for Environmental Monitoring Plan (EMP) generated data only. Above normal Level 2 values are based, in ES&H procedures, on historical high values, DOE Derived Concentration Guides (DCGs), NPDES limits and other guidelines. The procedures also establish actions to be taken in the event that {open_quotes}above normal{close_quotes} data occur. All data received and verified during the first quarter were within a permissible range of variability except for those detailed below. Above normal occurrences are cited for groundwater, air, and NPDES data. There were none for springs or surface water. The following discussion offers a brief summary of the data merged during the first quarter that exceeded the above normal criteria and updates on past reported above normal data. The attached tables present the most recent data for air and the data merged into the data base during the first quarter 1998 for groundwater, NPDES, surface water, and springs. Graphs showing concentrations of selected contaminants of concern at some of the critical locations have also been included in this QEDS. The graphs are discussed in the separate sections.« less
Analysis of scanner data for crop inventories
NASA Technical Reports Server (NTRS)
Horvath, R. (Principal Investigator); Cicone, R. C.; Kauth, R. J.; Malila, W. A.; Pont, W.; Thelen, B.; Sellman, A.
1981-01-01
Accomplishments for a machine-oriented small grains labeler T&E, and for Argentina ground data collection are reported. Features of the small grains labeler include temporal-spectral profiles, which characterize continuous patterns of crop spectral development, and crop calendar shift estimation, which adjusts for planting date differences of fields within a crop type. Corn and soybean classification technology development for area estimation for foreign commodity production forecasting is reported. Presentations supporting quarterly project management reviews and a quarterly technical interchange meeting are also included.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Woodward, P.W.
1986-01-01
The basic objective is to provide technical support to the Strategic Petroleum Reserve Office (SPRO), through the Bartlesville Project Office. This support includes routine analyses, experimental research, and technical consultation at the SPRO's request. Accomplishments for this past quarter include: stable D, /sup 34/S, and /sup 13/C isotope ratio analyses for 27 samples of SPR crude oil; gas chromatographic simulated distillation (Sim-dis) of 74 SPR crude samples; sim-dis of sludge samples to check for bimodal distributions; data for 8 comprehensive analyses have been entered into the Bonner and Moore ''Crude Assay II'' library; 25 samples which included both whole crudesmore » and distillate fractions were chromatographed using Siemens dual-oven GC and PIANO software; separation of 4 sludge samples into acid, base, and neutral fractions by ion exchange chromatography; and proton and sodium-23 NMR measurements of sludge samples. 1 fig., 5 tabs.« less
ERIC Educational Resources Information Center
John, Walton C., Ed.
1925-01-01
For more than a quarter of a century the United States has witnessed a period remarkable in the variety and the extent of its scientific achievements. This is all the more apparent if individuals compare developments in the fields of agriculture, engineering, and their allied sciences and industries with those of the preceding period. Likewise a…
NASA Technical Reports Server (NTRS)
Rose, W. I.; Paces, J. B.; Chesner, C. A.; Pletka, B. J.; Hellawell, A.; Kawatra, S. K.; Pilling, J. E.
1990-01-01
A new course was developed and instituted in the spring quarter of 1989 dealing with topics related to space resource utilization and related engineering. The course development required a concerted, coordinated effort, because a similar course which might be used as a guide could not be identified anywhere and the interdisciplinary perspective that was required was not identified anywhere on the university campus. Students in the class worked on interdisciplinary design projects which culminated in papers and oral presentations. Each of the six design groups consisted of several engineers with different disciplinary roots. The entire course lecture sequence, about 50 hours in all, was videotaped. Discussed here are the authors' experiences in developing the course, including the course syllabus and speaker list.
Teaching business ethics to professional engineers.
Sauser, William I
2004-04-01
Without question "business ethics" is one of the hot topics of the day. Over the past months we have seen business after business charged with improper practices that violate commonly-accepted ethical norms. This has led to a loss of confidence in corporate management, and has had severe economic consequences. From many quarters business educators have heard the call to put more emphasis on ethical practices in their business courses and curricula. Engineering educators are also heeding this call, since the practice of engineering usually involves working for (or leading) a business and/or engaging in business transactions. In the summer of 2002, Auburn University's Engineering Professional Development program made the decision to produce--based on the author's Executive MBA course in Business Ethics--a distance-delivered continuing education program for professional engineers and surveyors. Participants across the USA now may use the course to satisfy continuing education requirements with respect to professional licensing and certification. This paper outlines the purpose and content of the course and describes its production, distribution, application, and evaluation.
Kinane, Denis F; Stathopoulou, Panagiota G; Papapanou, Panos N
2017-06-22
Periodontal diseases comprise a wide range of inflammatory conditions that affect the supporting structures of the teeth (the gingiva, bone and periodontal ligament), which could lead to tooth loss and contribute to systemic inflammation. Chronic periodontitis predominantly affects adults, but aggressive periodontitis may occasionally occur in children. Periodontal disease initiation and propagation is through a dysbiosis of the commensal oral microbiota (dental plaque), which then interacts with the immune defences of the host, leading to inflammation and disease. This pathophysiological situation persists through bouts of activity and quiescence, until the affected tooth is extracted or the microbial biofilm is therapeutically removed and the inflammation subsides. The severity of the periodontal disease depends on environmental and host risk factors, both modifiable (for example, smoking) and non-modifiable (for example, genetic susceptibility). Prevention is achieved with daily self-performed oral hygiene and professional removal of the microbial biofilm on a quarterly or bi-annual basis. New treatment modalities that are actively explored include antimicrobial therapy, host modulation therapy, laser therapy and tissue engineering for tissue repair and regeneration.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Goyen, S.; Baily, E.; Mawer, J.
1980-10-01
The objective of the work reported herein was to develop a preliminary conceptual design, capital requirements, and product cost for a lignite-to-methanol plant incorporating Winkler Gasification Technology and ICI Methanol synthesis. The lignite-to-methanol complex described herein is designed to produce 15,000 TPD of fuel grade methanol. The complex is designed to be self-sufficient with respect to all utility services, offsites, and other support facilities, including power generation. Following is a summary of the results of the study: (1) Tons per day (TPD) of Lignite Feedstock and Fuel (as received) was 47,770; (2) TPD of Fuel Grade Methanol Product was 15,000;more » (3) Thermal efficiency, % (HHV) was 47.4; (4) Plant investment expressed in terms of first quarter of 1980 was ($ Million) 1545; and (5) Applying the economic premises used by EPRI for fuel conversion plant utility type financing, the calculated levelized and first year product costs are included.« less
2014-05-21
11-52-53: At the Cosmonaut Hotel crew quarters in Baikonur, Kazakhstan, Expedition 40/41 backup crewmember Terry Virts of NASA (left) and prime crewmember and Flight Engineer Alexander Gerst of the European Space Agency (right) try their hand at a game of Ping-Pong May 21 as they head into the homestretch of their pre-launch training. Gerst, Soyuz Commander Max Suraev of the Russian Federal Space Agency (Roscosmos) and NASA Flight Engineer Reid Wiseman will launch on May 29, Kazakh time, on the Soyuz TMA-13M spacecraft from the Baikonur Cosmodrome for a 5 ½ month mission on the International Space Station. NASA/Victor Zelentsov
DOE Office of Scientific and Technical Information (OSTI.GOV)
DC Hartshorn, SP Reidel, AC Rohay
1998-10-23
Hanford Seismic Monitoring provides an uninterrupted collection of high-quality raw and processed seismic data from the Hanford Seismic Network (HSN) for the U.S. Department of Energy and its contractors. The staff also locates aud identifies sources of seismic activity and monitors changes in the hi~orical pattern of seismic activity at the Hanford Site. The data are. compiled archived, and published for use by the Hanford Site for waste management Natural Phenomena Hazards assessments, and engineering design and construction. In addition, the seismic monitoring organization works with the Hanford Site Emergency Services Organization to provide assistance in the event of zinmore » earthquake on the Hanford Site. The HSN and Ihe Eastern Washington Regional Network (EN/RN) consist-of 42 individual sensor sites and 15 radio relay sites maintained by the Hanford Seismic Monitoring staff. The operational rate for the third quarter of FY 1998 for stations in the HSN was 99.99%. The operational rate for the third quarter of FY 1998 for stations of the EWRN was 99.95%. For the third quarter of FY 1998, the acquisition computer triggered 133 times. Of these triggers 11 were local earthquakes: 5 (45Yo) in the Columbia River Basalt Group, 2(1 8%) in the pre-basalt sediments, and 4 (36%) in the crystalline basement. The geologic and tectonic environments where these earthquakes occurred are discussed in this report.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
DC Hartshorn, SP Reidel, AC Rohay.
1998-10-23
Hanford Seismic Monitoring provides an uninterrupted collection of high-quality raw and processed seismic data from the Hanford Seismic Network (HSN) for the U.S. Department of Energy and its contractors. The staff also locates aud identifies sources of seismic activity and monitors changes in the hi orical pattern of seismic activity at the Hanford Site. The data are. compiled archived, and published for use by the Hanford Site for waste management Natural Phenomena Hazards assessments, and engineering design and construction. In addition, the seismic monitoring organization works with the Hanford Site Emergency Services Organization to provide assistance in the event ofmore » zin earthquake on the Hanford Site. The HSN and Ihe Eastern Washington Regional Network (EN/RN) consist-of 42 individual sensor sites and 15 radio relay sites maintained by the Hanford Seismic Monitoring staff. The operational rate for the third quarter of FY 1998 for stations in the HSN was 99.99%. The operational rate for the third quarter of FY 1998 for stations of the EWRN was 99.95%. For the third quarter of FY 1998, the acquisition computer triggered 133 times. Of these triggers 11 were local earthquakes: 5 (45Yo) in the Columbia River Basalt Group, 2(1 8%) in the pre-basalt sediments, and 4 (36%) in the crystalline basement. The geologic and tectonic environments where these earthquakes occurred are discussed in this report.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1986-12-31
The goal of this program is to develop polymer membranes useful in the preparation of hydrogen from coal-derived synthesis gas. During this quarter the first experiment were aimed at developing high performance composite membranes for the separation of hydrogen from nitrogen and carbon monoxide. Three polymers have been selected as materials for these membranes: polyetherimide cellulose acetate and ethylcellulose. This quarter the investigators worked on polyetherimide and cellulose acetate membranes. The overall structure of these membranes is shown schematically in Figure 1. As shown, a microporous support membrane is first coated with a high flux intermediate layer then with anmore » ultrathin permselective layer and finally, if necessary, a thin protective high flux layer. 1 fig., 4 tabs.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1981-01-01
The major activities at OOSI's Logan Wash site during the quarter were: mining the voids at all levels for Retorts 7 and 8; blasthole drilling; tracer testing MR4; conducting the start-up and burner tests on MR3; continuing the surface facility construction; and conducting Retorts 7 and 8 related Rock Fragmentation tests. Environmental monitoring continued during the quarter, and the data and analyses are discussed. Sandia National Laboratory and Laramie Energy Technology Center (LETC) personnel were active in the DOE support of the MR3 burner and start-up tests. In the last section of this report the final oil inventory for Retortmore » 6 production is detailed. The total oil produced by Retort 6 was 55,696 barrels.« less
NASA Technical Reports Server (NTRS)
Gary, G. A.
2003-01-01
Under the educational Resident Research Associateships (RRA) program, NASA Headquarters funds post-doctoral research scientists through a contract with the National Research Council (NRC). This short article reviews the important influence that the RRAs have had on solar research at NASA s Marshall Space Flight Center (MSFC). Through the RRA program the National Research Council under the National Academy of Sciences has provided the Marshall Space Flight Center s Solar Physics Group with 29 post-doctorial research associateships since 1975. This starting date corresponds with the increased research activity in solar physics at MSFC. A number of MSFC scientists had been working on and supporting NASA s Skylab Mission in operation from May 1973 until February 1974. This scientific effort included the development MSFC s X-ray telescope SO56 and the development of the United States first full-vector magnetograph. Numerous engineers and scientists at MSFC supported the development and operation of the cluster of solar telescopes on the Apollo Telescope Mount (ATM), a principal part of the Skylab orbiting workshop. With the enormous volume of new and exciting solar data of the solar corona, MSFC dedicated a group of scientists to analyze these data and develop new solar instruments and programs. With this new initiative, came the world- renowned solar prominence expert, Dr. Einar Tandberg-Hanssen, from the High Altitude Observatory in Boulder, Colorado and the support of the first two RRAs in support of solar physics research.
ERIC Educational Resources Information Center
Van Name, Barry
2012-01-01
There is a battlefield where no quarter is given, no mercy shown, but not a single drop of blood is spilled. It is an arena that witnesses the bringing together of high-tech design and manufacture with the outpouring of brute force, under the remotely accessed command of some of today's brightest students. This is the world of battling robots, or…
Strategic Studies Quarterly. Volume 4, Number 1, Spring 2010
2010-01-01
scientists to produce more infectious pathogens through the use of genetic manipulation. Indeed, the reproduc tive capacity of bacteria and viruses...eries will give potential bioterrorists the ability to genetically engineer and produce new biological weapons for only tens of thousands of dollars...United States, because of its dominant economy and political clout, was able to levy neo-liberal policy prescriptions under the rubric of the
Publications of the Jet Propulsion Laboratory, 1988
NASA Technical Reports Server (NTRS)
1989-01-01
This bibliography describes and indexes by primary author the externally distributed technical reporting, released during calendar year 1988, that resulted from scientific and engineering work performed, or managed, by the Jet Propulsion Laboratory. Three classes of publications are included: JPL publications in which the information is complete for a specific accomplishment; articles from the quarterly Telecommunications and Data Acquisition (TDA) Progress Report; and articles published in the open literature.
2004-10-07
Expedition 10 Commander Leroy Chiao undergoes physical testing on a mechanized tilt table at crew quarters in Baikonur, Kazakhstan, Friday, October 8, 2004, in preparation for launch with Flight Engineer and Soyuz Commander Salizhan Sharipov and Russian Space Forces Agency cosmonaut Yuri Shargin to the International Space Station on October 14. The tilt table is used to condition the crewmembers' cardiovascular system against the effects of weightlessness once on orbit. Photo Credit: (NASA/Bill Ingalls)
2004-10-07
Expedition 10 Commander Leroy Chiao, left, and Russian Space Forces cosmonaut Yuri Shargin undergo physical testing on a mechanized tilt table at their crew quarters in Baikonur, Kazakhstan, Friday, October 8, 2004, in preparation for launch with Flight Engineer and Soyuz Commander Salizhan Sharipov to the International Space Station on October 14. The tilt table is used to condition the crewmembers' cardiovascular system against the effects of weightlessness once in orbit. Photo Credit: (NASA/Bill Ingalls)
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
1958-10-31
The progress and trends of research are presented along with a description of operational, service, end administrative activities. Some scientific and technical details are given on research programs in the physical sciences, life sciences, and engineering, however, more complete technical information is available in quarterly progress reports, BNL technical reports, and scientific and technical periodicals. A bibliography of these publications is appended. (For preceding period see BNL-426.) (D.E.B.)
NASA Astrophysics Data System (ADS)
Gilmore, Gerard
2018-04-01
In this concluding article I recall the early history of the Gaia mission, showing that the original science case and expectations of wide community interest in Gaia data have been met. The quarter-century long partnership involving some 1,000 scientists, engineers and managers in industry and academia is delivering a large, high-quality and unique data set which will underpin astrophysics across many sub-fields for years to come.
2010-08-01
NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND...management; leads military in case of specialized survey; supervises more than 25 local civilian employees ; acts as technical expert during contract...Security Assistance Force Head- quarters Camp. I knew I could handle the job of project manager, but wondered about acting as contract manager, technical ex
Publications of the Jet Propulsion Laboratory, 1985
NASA Technical Reports Server (NTRS)
1986-01-01
This bibliography describes and indexes by primary author the externally distributed technical reporting, released during calender year 1985, that resulted from scientific and engineering work performed, or managed, by the Jet Propulsion Laboratory. Three classes of publications are included: JPL publications in which the information is complete for a specific accomplisment; Articles from the quarterly Telecommunications and Data Acquisition (TDA) Progress Report; and article published in the open literature.
River of Interests: Water Management in South Florida and the Everglades, 1948-2010
2011-07-01
Facing Significant Delays, Implementa- tion Challenges, and Rising Costs . GAO-07-520. Washington, D.C: U.S. Government Accountability Office, 2007...General Accounting Office HQUSACE Headquarters, U.S. Army Corps of Engineers IIF Internal Improvement Fund JDAR Jacksonville District...Florida has two seasons: wet and dry. The wet season, extending roughly from May through October, accounts for three- quarters of the average annual
Engine Non-Containment: The UK CAA View
NASA Technical Reports Server (NTRS)
Gunstone, G. L.
1977-01-01
Airworthiness accidents account for roughly one quarter of the total number of accidents to public transport turbojet aircraft. The most reliable, practicable, and cost-effective means of minimizing damage outside the confines of the nacelle is to make the aircraft design invulnerable to any debris which may affect the aircraft. A failure model was developed for use by aircraft builders in measuring the freedom from catastrophe factor of their design.
Chwastyk-Kowalczyk, Jolanta
2015-01-01
This article presents the history of establishment, functioning and the role of "Science and Technology"--quarterly of the Association of Polish Engineers in Great Britain--in shaping Polish technical thought in the environment of Polish engineers and technicians living in exile. The analysis of the content of the journal published in London in the years 1958-2008 made it evident that this official scientific organ of Polish technical intelligentsia edited in 500 copies reaches members of engineering, technical and scientific milieu across many continents. Despite the fact that Polish language dominates in the articles and thanks to the interdisciplinary character of their content - science and technology, biology, the humanities, sociology and others--the journal makes it possible for the reader to participate in an intellectual adventure. "Science and Technology" was created in 1958 on the initiative of Eng. Prof. Roman Wajda in Great Britain, with support of other Polish technical associations abroad, and embraced the achievements and organisational life of the Polish technical milieu dispersed around the world. On the basis of the London Society's archive materials and old annual volumes of the journal, the author listed editors-in-chief, composition of editorial committees, collaborators, determined editing costs, changeable periodicity, successive print shops, seats of editorial office that always followed the Association in Great Britain. She also showed the effort of a handful of members of editorial committees, working on a voluntary basis to obtain materials for the journal; the role of the journal linking Polish engineers and technicians in exile and its function as a link with the Country, as well as its role in the sphere of information and propaganda. Finally, the author made an analysis of the journal's content, focusing on categories of articles published in "Science and Technology" in the years 1958-2008. Methods used by the author in the article: archival, analysis of the press content: qualitative and quantitative.
Social Services Support and Expenditure for Children with Autism
ERIC Educational Resources Information Center
Bebbington, Andrew; Beecham, Jennifer
2007-01-01
This article provides information about children with autism who are supported by English social services departments based on the Children in Need Survey 2001 (CIN2001). In 119 authorities, 6310 children were recorded as having a diagnosis of autism or related conditions, probably about one-quarter of all children with such diagnoses and about…
Sonar Test and Test Instrumentation Support.
1979-03-29
AD-AlSO 055 TEXAS UNIV AT AUSTIN APPLIED RESEARCH LABS F/6 17/1 SONAR TEST AND TEST INSTRUMENTATION SUPPORT (U) MAR 79 0 D BAKER N00140-76-C-64a7... SONAR TEST AND TEST INSTRUMENTATION SUPPORT quarterly progress report September - 30 November 197Pj 6. PERFORMING ORG. REPORT NUMBER 7. AUTHOR(e) S...involves technical support with sonar testing, test instrumentation, and documentation. This report describes progress made under the tasks that are
Experiences and psychological distress of fertility treatment and employment.
Payne, Nicola; Seenan, Susan; van den Akker, Olga
2018-04-16
This study examined experiences and psychological distress about fertility treatment in people combining work and treatment. Five hundred and sixty-three participants in the UK completed an online survey asking about difficulties in combining work and treatment; workplace disclosure, support, absence and policy; and psychological distress about treatment. Absence from work and perceptions that treatment has an impact on work and career prospects were reported by the majority of participants and this was related to the psychological distress of treatment. Around three quarters of participants disclosed to their employer and colleagues. The key reason for disclosure was needing to ask for absence from work and the main reason for non-disclosure was privacy. Workplace policy relating to managing fertility treatment and support from colleagues and their employer was related to reduced psychological distress but workplace policy was reported by less than one quarter of participants. Difficulties experienced in combining work and treatment suggest that support is needed. Specific workplace policy, guidance for supervisors and flexibility in fertility clinic times should help support employees during treatment and reduce psychological distress, thereby potentially influencing physical health and treatment outcomes.
NASA Technical Reports Server (NTRS)
Bruner, M. E.; Haisch, B. M.
1986-01-01
The Ultraviolet Spectrometer/Polarimeter Instrument (UVSP) for the Solar Maximum Mission (SMM) was based on the re-use of the engineering model of the high resolution ultraviolet spectrometer developed for the OSO-8 mission. Lockheed assumed four distinct responsibilities in the UVSP program: technical evaluation of the OSO-8 engineering model; technical consulting on the electronic, optical, and mechanical modifications to the OSO-8 engineering model hardware; design and development of the UVSP software system; and scientific participation in the operations and analysis phase of the mission. Lockheed also provided technical consulting and assistance with instrument hardware performance anomalies encountered during the post launch operation of the SMM observatory. An index to the quarterly reports delivered under the contract are contained, and serves as a useful capsule history of the program activity.
Biomedical Applications of NASA Science and Technology
NASA Technical Reports Server (NTRS)
Brown, James N., Jr.
1968-01-01
During the period 15 September 1968 to 14 December 1968, the NASA supported Biomedical Application Team at the Research Triangle Institute has identified 6 new problems, performed significant activities on 15 of the active problems identified previously, performed 5 computer searches of the NASA aerospace literature, and maintained one current awareness search. As a partial result of these activities, one technology transfer was accomplished. As a part of continuing problem review, 13 problems were classified inactive. Activities during the quarter involved all phases of team activity with respect to biomedical problems. As has been observed in preceding years, it has been exceedingly difficult to arrange meetings with medical investigators during the fourth quarter of the calendar year. This is a result of a combination of factors. Teaching requirements, submission of grant applications and holidays are the most significant factors involved. As a result, the numbers of new problems identified and of transfers and potential transfers are relatively low during this quarter. Most of our activities have thus been directed toward obtaining information related to problems already identified. Consequently, during the next quarter we will follow up on these activities with the expectation that transfers will be accomplished on a number of them. In addition, the normal availability of researchers to the team is expected to be restored during this quarter, permitting an increase in new problem identification activities as well as follow-up with other researchers on old problems. Another activity scheduled for the next quarter is consultation with several interested biomedical equipment manufacturers to explore means of effective interaction between the Biomedical Application Team and these companies.
Development of critical dimension measurement scanning electron microscope for ULSI (S-8000 series)
NASA Astrophysics Data System (ADS)
Ezumi, Makoto; Otaka, Tadashi; Mori, Hiroyoshi; Todokoro, Hideo; Ose, Yoichi
1996-05-01
The semiconductor industry is moving from half-micron to quarter-micron design rules. To support this evolution, Hitachi has developed a new critical dimension measurement scanning electron microscope (CD-SEM), the model S-8800 series, for quality control of quarter- micron process lines. The new CD-SEM provides detailed examination of process conditions with 5 nm resolution and 5 nm repeatability (3 sigma) at accelerating voltage 800 V using secondary electron imaging. In addition, a newly developed load-lock system has a capability of achieving a high sample throughput of 20 wafers/hour (5 point measurements per wafer) under continuous operation. To support user friendliness, the system incorporates a graphical user interface (GUI), an automated pattern recognition system which helps locating measurement points, both manual and semi-automated operation, and user-programmable operating parameters.
2014-05-21
11-47-48: At the Cosmonaut Hotel crew quarters in Baikonur, Kazakhstan, Expedition 40/41 backup crewmembers Terry Virts of NASA (left) and Samantha Cristoforetti of the European Space Agency (right) try their hand at a game of billiards May 21 as they head into the homestretch of pre-launch training. Virts, Cristoforetti and Anton Shkaplerov of the Russian Federal Space Agency (Roscosmos) are backing up the prime crew, Flight Engineer Alexander Gerst of the European Space Agency, Soyuz Commander Max Suraev of Roscosmos and NASA Flight Engineer Reid Wiseman, who will launch on May 29, Kazakh time, on the Soyuz TMA-13M spacecraft from the Baikonur Cosmodrome for a 5 ½ month mission on the International Space Station. NASA/Victor Zelentsov
2013-03-21
At the Cosmonaut Hotel crew quarters in Baikonur, Kazakhstan, Expedition 35-36 Flight Engineer Chris Cassidy of NASA (left) displays a flight data file book titled “Fast Rendezvous” March 21 as he, Soyuz Commander Pavel Vinogradov (center) and Flight Engineer Alexander Misurkin (right) train for launch to the International Space Station March 29, Kazakh time, in their Soyuz TMA-08M spacecraft from the Baikonur Cosmodrome for a 5 ½ month mission. The “fast rendezvous” refers to the expedited four-orbit, six-hour trip from the launch pad to reach the International Space Station March 29 through an accelerated rendezvous burn plan, the first time this approach will be used for crews flying to the international complex. NASA/Victor Zelentsov
Hofler, Thomas J.; Wheatley, John C.; Swift, Gregory W.; Migliori, Albert
1988-01-01
An acoustic cooling engine with improved thermal performance and reduced internal losses comprises a compressible fluid contained in a resonant pressure vessel. The fluid has a substantial thermal expansion coefficient and is capable of supporting an acoustic standing wave. A thermodynamic element has first and second ends and is located in the resonant pressure vessel in thermal communication with the fluid. The thermal response of the thermodynamic element to the acoustic standing wave pumps heat from the second end to the first end. The thermodynamic element permits substantial flow of the fluid through the thermodynamic element. An acoustic driver cyclically drives the fluid with an acoustic standing wave. The driver is at a location of maximum acoustic impedance in the resonant pressure vessel and proximate the first end of the thermodynamic element. A hot heat exchanger is adjacent to and in thermal communication with the first end of the thermodynamic element. The hot heat exchanger conducts heat from the first end to portions of the resonant pressure vessel proximate the hot heat exchanger. The hot heat exchanger permits substantial flow of the fluid through the hot heat exchanger. The resonant pressure vessel can include a housing less than one quarter wavelength in length coupled to a reservoir. The housing can include a reduced diameter portion communicating with the reservoir. The frequency of the acoustic driver can be continuously controlled so as to maintain resonance.
Results For The Third Quarter Calendar Year 2016 Tank 50H Salt Solution Sample
DOE Office of Scientific and Technical Information (OSTI.GOV)
Crawford, C.
2016-10-13
In this memorandum, the chemical and radionuclide contaminant results from the Third Quarter Calendar Year 2016 (CY16) sample of Tank 50H salt solution are presented in tabulated form. The Third Quarter CY16 Tank 50H samples (a 200 mL sample obtained 6” below the surface (HTF-5-16-63) and a 1 L sample obtained 66” from the tank bottom (HTF-50-16-64)) were obtained on July 14, 2016 and received at Savannah River National Laboratory (SRNL) on the same day. Prior to obtaining the samples from Tank 50H, a single pump was run at least 4.4 hours, and the samples were pulled immediately after pumpmore » shut down. The information from this characterization will be used by Defense Waste Processing Facility (DWPF) & Saltstone Facility Engineering for the transfer of aqueous waste from Tank 50H to the Saltstone Production Facility, where the waste will be treated and disposed of in the Saltstone Disposal Facility. This memorandum compares results, where applicable, to Saltstone Waste Acceptance Criteria (WAC) limits and targets. Data pertaining to the regulatory limits for Resource Conservation and Recovery Act (RCRA) metals will be documented at a later time per the Task Technical and Quality Assurance Plan (TTQAP) for the Tank 50H saltstone task. The chemical and radionuclide contaminant results from the characterization of the Third Quarter CY16 sampling of Tank 50H were requested by Savannah River Remediation (SRR) personnel and details of the testing are presented in the SRNL TTQAP.« less
2013-09-18
Expedition 37/38 Flight Engineer Michael Hopkins of NASA poses for photos by a tree planted in his name behind the Cosmonaut Hotel crew quarters in Baikonur, Kazakhstan Sept. 18. The tree planting was part of traditional ceremonies as Hopkins, Kotov and Ryazanskiy prepare to launch Sept. 26, Kazakh time, from the Baikonur Cosmodrome on their Soyuz TMA-10M spacecraft for a five and a half month mission on the International Space Station. NASA/Victor Zelentsov
1987-06-30
release; distribution unlimited. 87 8 3075 TABLE OF CONTENTS page TECHNICAL NOTES N-1764 Validation of Nitronic 33 in Reinforced and Prestressed...TECHNICAL WES K- 1764 Validation of Nitrovic 33 In Reeinforced and Prestressed Concrete, Apr 1987, James F. Jenkins (public release) Nitronic 33...prestressing strand are not acceptable. Before Nitronic 33 stainless steel prestressed concrete waterfront structures were constructed, it was necessary to
Prime Contract Awards by State, Fiscal Year 1988
1988-01-01
information on Department of Defense procurement actions. Data are broken down into three categories: 1) Total U.S. Actions, 2) Actions Not Distributed...and civil functions (i.e., US. Army Corps of Engineers--Civil Works) procurements are represented- The data are presented by state and include the...also provide, for comparison purposes, data for the fourth quarters of FY 1988 and FY 1987. The total net value of military procurement actions for
Publications of the Jet Propulsion Laboratory 1987
NASA Technical Reports Server (NTRS)
1988-01-01
A bibliography is presented which describes and indexes by author the externally distributed technical reporting, released during the calender year 1987, that resulted from scientific and engineering work performed, or managed, by the Jet Propulsion Lab. Three classes of publications are included: (1) JPL publications in which the information is complete for a specific accomplishment; (2) Articles from the quarterly Telecommunications and Data Acquisition Progress Report; and (3) Articles published in the open literature.
Langley, Tessa; Szatkowski, Lisa; Lewis, Sarah; McNeill, Ann; Gilmore, Anna B; Salway, Ruth; Sims, Michelle
2014-06-01
To measure the impact of the suspension of tobacco control mass media campaigns in England in April 2010 on measures of smoking cessation behaviour. Interrupted time series design using routinely collected population-level data. Analysis of use of a range of types of smoking cessation support using segmented negative binomial regression. England. Use of non-intensive support: monthly calls to the National Health Service (NHS) quitline (April 2005-September 2011), text requests for quit support packs (December 2007-10) and web hits on the national smoking cessation website (January 2009-March 2011). Use of intensive cessation support: quarterly data on the number of people setting a quit date and 4-week quitters at the NHS Stop Smoking Services (SSS) (quarter 1, 2001 and quarter 3, 2011). During the suspension of tobacco control mass media spending, literature requests fell by 98% [95% confidence interval (CI) = 96-99], and quitline calls and web hits fell by 65% (95% CI = 43-79) and 34% (95% CI: 11-50), respectively. The number of people setting a quit date and 4-week quitters at the SSS increased throughout the study period. The suspension of tobacco control mass media campaigns in England in 2012 appeared to markedly reduce the use of smoking cessation literature, quitline calls and hits on the national smoking cessation website, but did not affect attendance at the Stop Smoking Services. Within a comprehensive tobacco control programme, mass media campaigns can play an important role in maximizing quitting activity. © 2013 The Authors. Addiction published by John Wiley & Sons Ltd on behalf of Society for the Study of Addiction.
1977-06-15
MASSACHUSETTS INSTITUTE OF TECHNOLOGY LINCOLN LABORATORY SPACE COMMUNICATIONS QUARTERLY TECHNICAL SUMMARY REPORT TO THE AIR FORCE...Massachusetts Institute of Technology, with the support of the Department of the Air Force under Contract F19628-76-C-0002. This report may be...four areas: support of communications-link testing by outside agencies, cooperative jamming tests, bit-error-rate measurements on the Air Force
NASA Astrophysics Data System (ADS)
Liu, Jing; Shao, Yimin
2017-06-01
Rotor bearing systems (RBSs) play a very valuable role for wind turbine gearboxes, aero-engines, high speed spindles, and other rotational machinery. An in-depth understanding of vibrations of the RBSs is very useful for condition monitoring and diagnosis applications of these machines. A new twelve-degree-of-freedom dynamic model for rigid RBSs with a localized defect (LOD) is proposed. This model can formulate the housing support stiffness, interfacial frictional moments including load dependent and load independent components, time-varying displacement excitation caused by a LOD, additional deformations at the sharp edges of the LOD, and lubricating oil film. The time-varying displacement model is determined by a half-sine function. A new method for calculating the additional deformations at the sharp edges of the LOD is analytical derived based on an elastic quarter-space method presented in the literature. The proposed dynamic model is utilized to analyze the influences of the housing support stiffness and LOD sizes on the vibration characteristics of the rigid RBS, which cannot be predicted by the previous dynamic models in the literature. The results show that the presented method can give a new dynamic modeling method for vibration formulation for a rigid RBS with and without the LOD on the races.
39. Attic, detail of builtin cabinet on interior east wall ...
39. Attic, detail of built-in cabinet on interior east wall supports - Veterans Administration Center, Officers Duplex Quarters, 5302 East Kellogg (Legal Address); 5500 East Kellogg (Common Address), Wichita, Sedgwick County, KS
32 CFR 584.7 - Basic allowance for quarters.
Code of Federal Regulations, 2013 CFR
2013-07-01
... divorce decree or court order is silent on support or releases the soldier from the responsibility of... spouse or stepchildren after the divorce. BAQ at the “with dependents” rate is not authorized when the...
32 CFR 584.7 - Basic allowance for quarters.
Code of Federal Regulations, 2014 CFR
2014-07-01
... divorce decree or court order is silent on support or releases the soldier from the responsibility of... spouse or stepchildren after the divorce. BAQ at the “with dependents” rate is not authorized when the...
Regional interdependence and manual therapy directed at the thoracic spine.
McDevitt, Amy; Young, Jodi; Mintken, Paul; Cleland, Josh
2015-07-01
Thoracic spine manipulation is commonly used by physical therapists for the management of patients with upper quarter pain syndromes. The theoretical construct for using thoracic manipulation for upper quarter conditions is a mainstay of a regional interdependence (RI) approach. The RI concept is likely much more complex and is perhaps driven by a neurophysiological response including those related to peripheral, spinal cord and supraspinal mechanisms. Recent evidence suggests that thoracic spine manipulation results in neurophysiological changes, which may lead to improved pain and outcomes in individuals with musculoskeletal disorders. The intent of this narrative review is to describe the research supporting the RI concept and its application to the treatment of individuals with neck and/or shoulder pain. Treatment utilizing both thrust and non-thrust thoracic manipulation has been shown to result in improvements in pain, range of motion and disability in patients with upper quarter conditions. Research has yet to determine optimal dosage, techniques or patient populations to which the RI approach should be applied; however, emerging evidence supporting a neurophysiological effect for thoracic spine manipulation may negate the need to fully answer this question. Certainly, there is a need for further research examining both the clinical efficacy and effectiveness of manual therapy interventions utilized in the RI model as well as the neurophysiological effects resulting from this intervention.
HIV Rapid Testing in a VA Emergency Department Setting: Cost Analysis at 5 Years.
Knapp, Herschel; Chan, Kee
2015-07-01
To conduct a comprehensive cost-minimization analysis to comprehend the financial attributes of the first 5 years of an implementation wherein emergency department (ED) registered nurses administered HIV oral rapid tests to patients. A health science research implementation team coordinated with ED stakeholders and staff to provide training, implementation guidelines, and support to launch ED registered nurse-administered HIV oral rapid testing. Deidentified quantitative data were gathered from the electronic medical records detailing quarterly HIV rapid test rates in the ED setting spanning the first 5 years. Comprehensive cost analyses were conducted to evaluate the financial impact of this implementation. At 5 years, a total of 2,620 tests were conducted with a quarterly mean of 131 ± 81. Despite quarterly variability in testing rates, regression analysis revealed an average increase of 3.58 tests per quarter. Over the course of this implementation, Veterans Health Administration policy transitioned from written to verbal consent for HIV testing, serving to reduce the time and cost(s) associated with the testing process. Our data indicated salient health outcome benefits for patients with respect to the potential for earlier detection, and associated long-run cost savings. Copyright © 2015. Published by Elsevier Inc.
NASA Astrophysics Data System (ADS)
Calderone, G. M.
2006-12-01
A long-term monitoring program was initiated in 1995 at 6 sites at NAS Brunswick, including 3 National Priorities List (Superfund) sites. Primary contaminants of concern include chlorinated volatile organic compounds, including tetrachloroethane, trichloroethene, and vinyl chloride, in addition to metals. More than 80 submersible pumping systems were installed to facilitate sample collection utilizing the low-flow sampling technique. Long-term monitoring of the groundwater is conducted to assess the effectiveness of remedial measures, and monitor changes in contaminant concentrations in the Eastern Plume Operable Unit. Long-term monitoring program activities include quarterly groundwater sampling and analysis at more than 90 wells across 6 sites; surface water, sediment, seep, and leachate sampling and analysis at 3 sites; landfill gas monitoring; well maintenance; engineering inspections of landfill covers and other sites or evidence of stressed vegetation; water level gauging; and treatment plant sampling and analysis. Significant cost savings were achieved by optimizing the sampling network and reducing sampling frequency from quarterly to semi- annual or annual sampling. As part of an ongoing optimization effort, a geostatistical assessment of the Eastern Plume was conducted at the Naval Air Station, Brunswick, Maine. The geostatistical assessment used 40 monitoring points and analytical data collected over 3 years. For this geostatistical assessment, EA developed and utilized a database of analytical results generated during 3 years of long-term monitoring which was linked to a Geographic Information System to enhance data visualization capacity. The Geographic Information System included themes for groundwater volatile organic compound concentration, groundwater flow directions, shallow and deep wells, and immediate access to point-specific analytical results. This statistical analysis has been used by the site decision-maker and its conclusions supported a significant reduction in the Long-Term Monitoring Program.
Equipment Location Plan, partial basement plan. (Includes identification of each ...
Equipment Location Plan, partial basement plan. (Includes identification of each separate CPU, tape drive, hard drive, printer, keyboard, etc., within the data processing center in the southeast part of the basement.) March Air Force Base, Riverside, California, Combat Operations Center, 465-L DPC. By International Electric Corporation, Paramus, New Jersey (3/5/62); for Moffatt and Nichol, Engineers, 122 West Fifth Street, Long Beach, California; for the Corps of Engineers, U.S. Army, Office of the District Engineer, Los Angeles, California. Drawing no. AW-60-02-03, sheet no. 100, approved March, 1962; specifications no. OCI-62-66; D.O. series AW 1596/100, Rev. "A"; file drawer 1290. Last revised 3 October 1966. Scale one-quarter inch to one foot. 28.75x40.5 inches. ink on linen - March Air Force Base, Strategic Air Command, Combat Operations Center, 5220 Riverside Drive, Moreno Valley, Riverside County, CA
Equipment Location Plan, partial first floor plan. (Includes identification of ...
Equipment Location Plan, partial first floor plan. (Includes identification of each separate CPU, tape drive, hard drive, printer, keyboard, etc., within the data processing center in the southwest part of the first floor.) March Air Force Base, Riverside, California, Combat Operations Center, 465-L EDTCC/EDLCC. By International Electric Corporation, Paramus, New Jersey (3/5/62); for Moffatt and Nichol, Engineers, 122 West Fifth Street, Long Beach, California; for the Corps of Engineers, U.S. Army, Office of the District Engineer, Los Angeles, California. Drawing no. AW-60-02-03, sheet no. 85, approved March, 1962; specifications no. OCI-62-66; D.O. series AW 1596/85, Rev. "A"; file drawer 1290. Last revised 3 October 1966. Scale one-quarter inch to one foot. 28.75x40.5 inches. ink on linen - March Air Force Base, Strategic Air Command, Combat Operations Center, 5220 Riverside Drive, Moreno Valley, Riverside County, CA
Factors associated with risky sun exposure behaviors among operating engineers.
Duffy, Sonia A; Choi, Seung Hee; Hollern, Rachael; Ronis, David L
2012-09-01
The objective of this study was to determine the factors associated with sun exposure behaviors among Operating Engineers (heavy equipment operators). Operating Engineers (N = 498) were asked to complete a cross-sectional survey. Linear and logistic regression analyses were used to determine health behavioral, perceptional, and demographic factors associated with sun exposure behavior (sun burns, blistering, use of sunscreen, and interest in sun protection services). Almost half reported two or more sunburns/summer and the median times blistering was 2 with a range of 0-100. About one-third never used sun block, while just over one-third rarely used sun block. Almost one-quarter were interested in sun protection guidance. Multivariate analyses showed that perceptions of skin type, alcohol problems, fruit intake, BMI, sleep quality, age, sex, and race were significantly associated with at least one of the outcome variables (P < 0.05). Operating Engineers are at high risk for skin cancer due to high rates of exposure to ultraviolet light and low rates of sun block use. Subgroups of Operating Engineers are particularly at risk for sun damage. Interventions are needed to decrease sun exposure among Operating Engineers. Copyright © 2012 Wiley Periodicals, Inc.
Francis Bitter National Laboratory quarterly progress report, July 1, 1972--September 30, 1972
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1972-10-31
Reports on research projects at Francis Bitter National Magnet Laboratory are presented on 19 different topics including the following: far infrared magneto-optics; quantum optics; soft x-rays and laser-produced plasmas; magneto-optical theory; magnetism and superconductivity; Mossbauer effect studies; superconducting thin films; amorphous semiconductors and superconductivity; nuclear magnetic resonance of biomolecules; low magnetic fields; superconducting medical magnet; magnetically guided catheters; magnetic separation; high current switching; development of guided electromagnetic flight; Alcator; high voltage discharges in cryocables; and low temperature thermometry in high magnetic fields. The Magnet Research and Technology Program and reports of visiting scientists are also included in this report. Reportsmore » on some research not supported by NSF are included, and the supporting agencies are indicated. A list of publications and speeches presented at meetings during the quarter covered by this report are included in an appendix.« less
Ice Engineering: Ice Jams, Winter 2002-2003
2004-07-01
located between Caribou and Fort Fairfield, and from Presque Isle and Washburn (NWS 2003i). Of the seven, four were reported in December and three...the towns of Washburn and Presque Isle ) was estimated to be one-quarter of a mile long in December. This jam remained in place until 21 April 2003...then appeared to break in half, sending the downstream floe of ice southeast through the town of Presque Isle while the most upstream section of
1986-12-31
underwater use and evaluated in laboratory and field tests. One of the three instruments was a magnetic rebar locator that locates rebar in concrete ...structures and measures the amount of concrete cover over the rebar . Another instrument was a Schmidt hammer that evaluates the surface hardness of the...Used as Boiler Fuel ..... .................. 3 N-1744 Blistering of Asphalt Pavement Overlay on Runway 14-32 at MCAS Bea, fort, South Carolina
Project SQUID: Quarterly Progress Report
1950-07-01
JET ENGINES. ( HYU -eÄl) Submitted by» J» Lemeleon^ New York University, No data on the operations of the glass-walled pulse jet have been...It is felt at HYU that a better understanding of the rela- tively simple phenomenon of the Rijke tube is, therefore, essential before headway...tnd combustion, KYTJ-7R6. Lerge amplitude ges vibration theory 19 HyU -7R7. Photo-ignition 1.4 NYU-7R8. Hydrocorbon Fleme Bends 67 i NYU
ERIC Educational Resources Information Center
Mburia-Mwalili, Adel; Clements-Nolle, Kristen; Lee, William; Shadley, Meri; Wei Yang,
2010-01-01
Data from the 2006 Behavioral Risk Factor Surveillance System in Nevada was analyzed to determine whether social support is independently associated with depression in a population-based sample of women with a history of intimate partner violence (IPV). More than a quarter (27%) of the women who were randomly chosen to participate in the survey…
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
This document consists of a list of projects supporting work on oil recovery programs. A publications list and index of companies and institutions is provided. The remaining portion of the document provides brief descriptions on projects in chemical flooding, gas displacement, thermal recovery, geoscience, resource assessment, and reservoir class field demonstrations.
Tegegne, Sisay G.; MKanda, Pascal; Yehualashet, Yared G.; Erbeto, Tesfaye B.; Touray, Kebba; Nsubuga, Peter; Banda, Richard; Vaz, Rui G.
2016-01-01
Background. An accountability framework is a central feature of managing human and financial resources. One of its primary goals is to improve program performance through close monitoring of selected priority activities. The principal objective of this study was to determine the contribution of a systematic accountability framework to improving the performance of the World Health Organization (WHO)–Nigeria polio program staff, as well as the program itself. Methods. The effect of implementation of the accountability framework was evaluated using data on administrative actions and select process indicators associated with acute flaccid paralysis (AFP) surveillance, routine immunization, and polio supplemental immunization activities. Data were collected in 2014 during supportive supervision, using Magpi software (a company that provides service to collect data using mobile phones). A total of 2500 staff were studied. Results. Data on administrative actions and process indicators from quarters 2–4 in 2014 were compared. With respect to administrative actions, 1631 personnel (74%) received positive feedback (written or verbal commendation) in quarter 4 through the accountability framework, compared with 1569 (73%) and 1152 (61%) during quarters 3 and 2, respectively. These findings accorded with data on process indicators associated with AFP surveillance and routine immunization, showing statistically significant improvements in staff performance at the end of quarter 4, compared with other quarters. Conclusions. Improvements in staff performance and process indicators were observed for the WHO-Nigeria polio program after implementation of a systematic accountability framework. PMID:26823334
Thermal-environmental testing of a 30-cm engineering model thruster
NASA Technical Reports Server (NTRS)
Mirtich, M. J.
1976-01-01
An experimental test program was carried out to document all 30-cm electron bombardment Hg ion bombardment thruster functions and characteristics over the thermal environment of several proposed missions. An engineering model thruster was placed in a thermal test facility equipped with -196 C walls and solar simulation. The thruster was cold soaked and exposed to simulated eclipses lasting in duration from 17 to 72 minutes. The thruster was operated at quarter, to full beam power in various thermal configurations which simulated multiple thruster operation, and was also exposed to 1 and 2 suns solar simulation. Thruster control characteristics and constraints; performance, including thrust magnitude and direction; and structural integrity were evaluated over the range of thermal environments tested.
Thermal-environment testing of a 30-cm engineering model thruster
NASA Technical Reports Server (NTRS)
Mirtich, M. J.
1976-01-01
An experimental test program was carried out to document all 30-cm electron bombardment Hg ion bombardment thruster functions and characteristics over the thermal environment of several proposed missions. An engineering model thruster was placed in a thermal test facility equipped with -196 C walls and solar simulation. The thruster was cold soaked and exposed to simulated eclipses lasting in duration from 17 to 72 minutes. The thruster was operated at quarter, to full beam power in various thermal configurations which simulated multiple thruster operation, and was also exposed to 1 and 2 suns solar simulation. Thruster control characteristics and constraints; performance, including thrust magnitude and direction; and structural integrity were evaluated over the range of thermal environments tested.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ansley, Shannon Leigh
2002-02-01
The Idaho Nuclear Technology and Engineering Center (INTEC) Service Wastewater Discharge Facility replaces the existing percolation ponds as a disposal facility for the INTEC Service Waste Stream. A preferred alternative for helping decrease water content in the subsurface near INTEC, closure of the existing ponds is required by the INTEC Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Record of Decision (ROD) for Waste Area Group 3 Operable Unit 3-13 (DOE-ID 1999a). By August 2002, the replacement facility was constructed approximately 2 miles southwest of INTEC, near the Big Lost River channel. Because groundwater beneath the Idaho National Engineering andmore » Environmental Laboratory (INEEL) is protected under Federal and State of Idaho regulations from degradation due to INEEL activities, preoperational data required by U.S. Department of Energy (DOE) Order 5400.1 were collected. These data include preexisting physical, chemical, and biological conditions that could be affected by the discharge; background levels of radioactive and chemical components; pertinent environmental and ecological parameters; and potential pathways for human exposure or environmental impact. This document presents specific data collected in support of DOE Order 5400.1, including: four quarters of groundwater sampling and analysis of chemical and radiological parameters; general facility description; site specific geology, stratigraphy, soils, and hydrology; perched water discussions; and general regulatory requirements. However, in order to avoid duplication of previous information, the reader is directed to other referenced publications for more detailed information. Documents that are not readily available are compiled in this publication as appendices. These documents include well and borehole completion reports, a perched water evaluation letter report, the draft INEEL Wellhead Protection Program Plan, and the Environmental Checklist.« less
32 CFR 584.7 - Basic allowance for quarters.
Code of Federal Regulations, 2012 CFR
2012-07-01
...-dependents rate each month in support of their families. (See DODPM, part 3.) This is so even if a divorce... spouse or stepchildren after the divorce. BAQ at the “with dependents” rate is not authorized when the...
32 CFR 584.7 - Basic allowance for quarters.
Code of Federal Regulations, 2011 CFR
2011-07-01
...-dependents rate each month in support of their families. (See DODPM, part 3.) This is so even if a divorce... spouse or stepchildren after the divorce. BAQ at the “with dependents” rate is not authorized when the...
32 CFR 584.7 - Basic allowance for quarters.
Code of Federal Regulations, 2010 CFR
2010-07-01
...-dependents rate each month in support of their families. (See DODPM, part 3.) This is so even if a divorce... spouse or stepchildren after the divorce. BAQ at the “with dependents” rate is not authorized when the...
Cosmonaut Dezhurov Talks With Flight Controllers
NASA Technical Reports Server (NTRS)
2001-01-01
Aboard the International Space Station (ISS), Cosmonaut and Expedition Three flight engineer Vladimir N. Dezhurov, representing Rosaviakosmos, talks with flight controllers from the Zvezda Service Module. Russian-built Zvezda is linked to the Functional Cargo Block (FGB), or Zarya, the first component of the ISS. Zarya was launched on a Russian Proton rocket prior to the launch of Unity. The third component of the ISS, Zvezda (Russian word for star), the primary Russian contribution to the ISS, was launched by a three-stage Proton rocket on July 12, 2000. Zvezda serves as the cornerstone for early human habitation of the Station, providing living quarters, a life support system, electrical power distribution, a data processing system, flight control system, and propulsion system. It also provides a communications system that includes remote command capabilities from ground flight controllers. The 42,000-pound module measures 43 feet in length and has a wing span of 98 feet. Similar in layout to the core module of Russia's Mir space station, it contains 3 pressurized compartments and 13 windows that allow ultimate viewing of Earth and space.
International Space Station (ISS)
2001-09-16
Aboard the International Space Station (ISS), Cosmonaut and Expedition Three flight engineer Vladimir N. Dezhurov, representing Rosaviakosmos, talks with flight controllers from the Zvezda Service Module. Russian-built Zvezda is linked to the Functional Cargo Block (FGB), or Zarya, the first component of the ISS. Zarya was launched on a Russian Proton rocket prior to the launch of Unity. The third component of the ISS, Zvezda (Russian word for star), the primary Russian contribution to the ISS, was launched by a three-stage Proton rocket on July 12, 2000. Zvezda serves as the cornerstone for early human habitation of the Station, providing living quarters, a life support system, electrical power distribution, a data processing system, flight control system, and propulsion system. It also provides a communications system that includes remote command capabilities from ground flight controllers. The 42,000-pound module measures 43 feet in length and has a wing span of 98 feet. Similar in layout to the core module of Russia's Mir space station, it contains 3 pressurized compartments and 13 windows that allow ultimate viewing of Earth and space.
International Space Station (ISS)
2001-12-12
Astronauts Frank L. Culbertson, Jr. (left), Expedition Three mission commander, and Daniel W. Bursch, Expedition Four flight engineer, work in the Russian Zvezda Service Module on the International Space Station (ISS). Zvezda is linked to the Russian built Functional Cargo Block (FGB), or Zarya, the first component of the ISS. Zarya was launched on a Russian Proton rocket prior to the launch of Unity. The third component of the ISS, Zvezda (Russian word for star), the primary Russian contribution to the ISS, was launched by a three-stage Proton rocket on July 12, 2000. Zvezda serves as the cornerstone for early human habitation of the Station, providing living quarters, a life support system, electrical power distribution, a data processing system, a flight control system, and a propulsion system. It also provides a communications system that includes remote command capabilities from ground flight controllers. The 42,000 pound module measures 43 feet in length and has a wing span of 98 feet. Similar in layout to the core module of Russia's Mir space station, it contains 3 pressurized compartments and 13 windows that allow ultimate viewing of Earth and space.
International Space Station (ISS)
2001-03-30
Astronaut James S. Voss, Expedition Two flight engineer, performs an electronics task in the Russian Zvezda Service Module on the International Space Station (ISS). Zvezda is linked to the Russian-built Functional Cargo Block (FGB), or Zarya, the first component of the ISS. Zarya was launched on a Russian Proton rocket prior to the launch of Unity, the first U.S.-built component to the ISS. Zvezda (Russian word for star), the third component of the ISS and the primary Russian contribution to the ISS, was launched by a three-stage Proton rocket on July 12, 2000. Zvezda serves as the cornerstone for early human habitation of the station, providing living quarters, a life support system, electrical power distribution, a data processing system, a flight control system, and a propulsion system. It also provides a communications system that includes remote command capabilities from ground flight controllers. The 42,000-pound module measures 43 feet in length and has a wing span of 98 feet. Similar in layout to the core module of Russia's Mir space station, it contains 3 pressurized compartments and 13 windows that allow ultimate viewing of Earth and space.
Quail Egg compared to a quarter
NASA Technical Reports Server (NTRS)
2003-01-01
Quail eggs are small (shown here with a quarter for scale) and develop quickly, making them ideal for space experiments. The Avian Development Facility (ADF) supports 36 eggs in two carousels (below), one of which rotates to provide a 1-g control for comparing to eggs grown in microgravity. The ADF originated in NASA's Shuttle Student Involvement program in the 1980s and was developed under the NASA Small Business Irnovation Research program. In late 2001, the ADF made its first flight and carried eggs used in two investigations, Development and function of the inner-ear balance system in normal and altered gravity environments, and Skeletal development in embryonic quail.
Programmable Logic Application Notes
NASA Technical Reports Server (NTRS)
Katz, Richard
1999-01-01
This column will be provided each quarter as a source for reliability, radiation results, NASA capabilities, and other information on programmable logic devices and related applications. This quarter the focus is on some experimental data on low voltage drop out regulators to support mixed 5 and 3.3 volt systems. A discussion of the Small Explorer WIRE spacecraft will also be given. Lastly, we show take a first look at robust state machines in Hardware Description Languages (VHDL) and their use in critical systems. If you have information that you would like to submit or an area you would like discussed or researched, please give me a call or e-mail.
Torikai, J.D.
1996-01-01
This report describes the status of ground-water resources at U.S. Navy Support Facility, Diego Garcia. Data presented are from January 1994 through June 1996, with a focus on data from April through June 1996 (second quarter of 1996). A complete database of ground-water withdrawals and chloride-concentration records since 1985 is maintained by the U.S. Geological Survey. Cumulative rainfall for April through June 1996 was 22.64 inches, which is 12 percent more than the mean cumulative rainfall of 20.21 inches for April through June. The period April through June is part of the annual dry season. Ground-water withdrawal during April through June 1996 averaged 1,048,000 gallons per day. Withdrawal for the same 3 months in 1995 averaged 833,700 gallons per day. Withdrawal patterns during the second quarter of 1996 did not change significantly since 1991, with the Cantonment and Air Operations areas supplying about 99 percent of total islandwide pumpage. At the end of June 1996, the chloride concentration of water from the elevated tanks at Cantonment and Air Operations were 52 and 80 milligrams per liter, respectively. The chloride data from all five production areas showed no significant upward or downward trends throughout the second quarter of 1996. Potable levels of chloride concentrations have been maintained by adjusting individual pumping rates, and also because of the absence of long-term droughts. Chloride concentration of ground water in monitoring wells at Cantonment and Air Operations also showed no significant trends throughout the second quarter of 1996. Chloride concentrations have been about the same since the last quarter of 1995. A fuel-pipeline leak at Air Operations in May 1991 decreased total islandwide withdrawals by 15 percent. This lost pumping capacity is being offset by increased pumpage at Cantonment. Six wells do not contribute to the water supply because they are being used to hydraulically divert fuel migration away from water-supply wells by a program of ground-water withdrawal and injection.
Torikai, J.D.
1996-01-01
This report describes the status of ground-water resources at U.S. Navy Support Facility, Diego Garcia. Data presented are from January 1994 through March 1996, with a focus on data from January through March 1996 (first quarter of 1996). A complete database of ground-water withdrawals and chloride-concentration records since 1985 is maintained by the U.S. Geological Survey. Cumulative rainfall for January through March 1996 was about 30 inches, which is 9 percent less than the mean cumulative rainfall of about 33 inches for January through March. The period January through February is the end of the annual wet season, while March marks the start of the annual dry season. Ground-water withdrawal during January through March 1996 averaged 970,300 gallons per day. Withdrawal for the same 3 months in 1995 averaged 894,600 gallons per day. With- drawal patterns during the first quarter of 1996 did not change significantly since 1991, with the Cantonment and Air Operations areas supplying about 99 percent of total islandwide pumpage. At the end of March 1996, the chloride concentration of water from the elevated tanks at Cantonment and Air Operations were 47 and 80 milligrams per liter, respectively. The chloride data from all five production areas showed no significant upward or downward trends throughout the first quarter of 1996. Potable levels of chloride concentrations have been maintained by adjusting individual pumping rates, and also because of the absence of long-term droughts. Chloride concentration of ground water in monitoring wells at Cantonment and Air Operations also showed no significant trends throughout the first quarter of 1996. Chloride concentrations have been about the same since the last quarter of 1995. A fuel-pipeline leak at Air Operations in May 1991 decreased total islandwide withdrawals by 15 percent. This lost pumping capacity is being offset by increased pumpage at Cantonment. Six wells do not contribute to the water supply because they are being used to hydraulically divert fuel migration away from water-supply wells by a program of ground-water withdrawal and injection.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cronauer, D.C.; Swanson, A.J.; Sajkowski, D.J.
Research under way in this project centers upon developing and evaluating catalysts and process improvements for coal liquefaction in the two-stage, close-coupled catalytic process. The project is being carried out under contract to the United States Department of Energy. As discussed in the previous quarterly report, promising results were obtained by liquefying Illinois No. 6 bituminous and Black Thunder subbituminous coals using oil-soluble catalysts Molyvan L and molybdenum octoate. In this quarter, the liquefaction of Black Thunder coal was continued. Runs were made in catalytic/thermal (C/T) mode with supported AMOCAT{trademark} 1C (NiMo) and AMOCAT{trademark} 1B (Mo) catalysts. Although the initialmore » performance in these runs was good (90% conversion with no resid production), both catalysts deactivated rapidly. Spent catalysts showed severe coke deposition as well as formation of a calcium-rich shell on the catalyst surface. Overall, C/T liquefaction is not a good process option for Black Thunder coal.« less
Repair Air Conditioning, COC Bldg 2605, Basement Plan. By Strategic ...
Repair Air Conditioning, COC Bldg 2605, Basement Plan. By Strategic Air Command, Civil Engineering. Drawing no. R-156, sheet no. 1 of 4, 15 August 1968; project no. MAR-125-8;CE-572; file drawer 2605-5. Last revised 31 August 1968?. Scale one-eighth inch and one-quarter inch to one foot. 29x41 inches. pencil on paper - March Air Force Base, Strategic Air Command, Combat Operations Center, 5220 Riverside Drive, Moreno Valley, Riverside County, CA
DOE Office of Scientific and Technical Information (OSTI.GOV)
Pavel Hejzlar, Peter Yarsky, Mike Driscoll, Dan Wachs, Kevan Weaver, Ken Czerwinski, Mike Pope, James Parry, Theron D. Marshall, Cliff B. Davis, Dustin Crawford, Thomas Hartmann, Pradip Saha; Hejzlar, Pavel; Yarsky, Peter
2005-01-31
This project is organized under four major tasks (each of which has two or more subtasks) with contributions among the three collaborating organizations (MIT, INEEL and ANL-West): Task A: Core Physics and Fuel Cycle; Task B: Core Thermal Hydraulics; Task C: Plant Design; Task D: Fuel Design The lead PI, Michael J. Driscoll, has consolidated and summarized the technical progress submissions provided by the contributing investigators from all sites, under the above principal task headings.
Publications of the Jet Propulsion Laboratory, 1984
NASA Technical Reports Server (NTRS)
1985-01-01
The Jet Propulsion Laboratory (JPL) bibliography 39-26 describes and indexes by primary author the externally distributed technical reporting, released during calendar year 1984, that resulted from scientific and engineering work performed, or managed, by the Jet Propulsion Laboratory. Three classes of publications are included: (1) JPL Publications (82-, 83-, 84-series, etc.), in which the information is complete for a specific accomplishment; (2) articles from the quarterly Telecommunications and Data Acquisition (TDA) Program Report (42-series); and (3) articles published in the open literature.
1986-03-01
investigations and site preservation Continuous hiking/biking path from Hwy. 20 to Hwy. 92 Soil erosion structures Access roads Skating pond Beach area on...Group Camp Cabins and Dormitories x Dining Hall x Infirmaries x Amphitheaters x x Caretaker Quarters x Outdoor Cooking x x Beaches x x Docks x x Tent pads...x x Swimming Beaches x x Visitor Center x2/ x Nature Center x Historical Centers x Archeological Centers x Environmental-Education Centers x Lodges
Publications of the Jet Propulsion Laboratory: 1990 and 1991
NASA Technical Reports Server (NTRS)
1993-01-01
JPL Bibliography 39-32 describes and indexes by primary author the externally distributed technical reporting, released during calendar years 1990 and 1991, that resulted from scientific and engineering work performed or managed by the Jet Propulsion Laboratory (JPL). Three classes of publications are included: (1) JPL publications (90- and 91-series) in which the information is complete for a specific accomplishment; (2) articles from the quarterly Telecommunications and Data Acquisition (TDA) Progress Report (42-series); and (3) articles published in the open literature.
Orbital Debris Quarterly News. Volume 13; No. 1
NASA Technical Reports Server (NTRS)
Liou, J.-C. (Editor); Shoots, Debi (Editor)
2009-01-01
Topics discussed include: new debris from a decommissioned satellite with a nuclear power source; debris from the destruction of the Fengyun-1C meteorological satellite; quantitative analysis of the European Space Agency's Automated Transfer Vehicle 'Jules Verne' reentry event; microsatellite impact tests; solar cycle 24 predictions and other long-term projections and geosynchronus (GEO) environment for the Orbital Debris Engineering Model (ORDEM2008). Abstracts from the NASA Orbital Debris Program Office, examining satellite reentry risk assessments and statistical issues for uncontrolled reentry hazards, are also included.
Regional interdependence and manual therapy directed at the thoracic spine
McDevitt, Amy; Young, Jodi; Mintken, Paul; Cleland, Josh
2015-01-01
Thoracic spine manipulation is commonly used by physical therapists for the management of patients with upper quarter pain syndromes. The theoretical construct for using thoracic manipulation for upper quarter conditions is a mainstay of a regional interdependence (RI) approach. The RI concept is likely much more complex and is perhaps driven by a neurophysiological response including those related to peripheral, spinal cord and supraspinal mechanisms. Recent evidence suggests that thoracic spine manipulation results in neurophysiological changes, which may lead to improved pain and outcomes in individuals with musculoskeletal disorders. The intent of this narrative review is to describe the research supporting the RI concept and its application to the treatment of individuals with neck and/or shoulder pain. Treatment utilizing both thrust and non-thrust thoracic manipulation has been shown to result in improvements in pain, range of motion and disability in patients with upper quarter conditions. Research has yet to determine optimal dosage, techniques or patient populations to which the RI approach should be applied; however, emerging evidence supporting a neurophysiological effect for thoracic spine manipulation may negate the need to fully answer this question. Certainly, there is a need for further research examining both the clinical efficacy and effectiveness of manual therapy interventions utilized in the RI model as well as the neurophysiological effects resulting from this intervention. PMID:26309384
Quarterly Progress Report (January 1 to March 31, 1950)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Brookhaven National Laboratory
This is the first of a series of Quarterly Reports. These reports will deal primarily with the progress made in our scientific program during a three months period. Those interested in matters pertaining to organization, administration, complete scientific program, personnel and other matters not directly involved in current scientific progress are referred to our Annual Progress Report which is issued in January. We have attempted to describe new information that appears significant, or of interest, to other scientists within the Atomic Energy Commission Laboratories. No effort has been made, however, to detail progress in each and every research project. Littlemore » or no reference will therefore be found to the projects in which progress during the current period is considered too inconclusive. Since our organizational structure is departmental, the work described herein is arranged in the following sequence: (1) Accelerator Project; (2) Biology Department; (3) Chemistry Department; (4) Instrumentation and Health Physic8 Department; (5) Medical Department; (6) Physics Department; and (7) Reactor Science and Engineering Department.« less
Effect of differential speed rolling on the texture evolution of Mg-4Zn-1Gd alloy
NASA Astrophysics Data System (ADS)
Shim, Myeong-Shik; Suh, Byeong-Chan; Kim, Jae H.; Kim, Nack J.
2015-05-01
The microstructural and texture evolution during differential speed rolling process of Mg 4Zn-1Gd (wt%) alloy have been investigated by means of electron backscatter diffraction observation and texture analysis. The angular distribution of basal poles are inclined about 10° from the normal direction towards the rolling direction and the maximum intensities of basal poles are decreased, compared to the conventional rolling process. Such an inclination of angular distribution of basal poles can be induced by the operation of shear stress along the rolling direction, as much as one quarter of tensile stress along the RD and one quarter of compressive stress along the ND. When the reduction ratios in differential speed rolling increase, there is no difference in texture evolution although there is a significant change in activated twinning systems. In addition, the engineering stresses after differential speed rolling are also similar to that after conventional rolling process, while ductility and stretch formability in the former are worse than those in the latter.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nigro, D.N.
1979-07-01
The quarterly status report covers the period from 30 April 1979 through 31 July 1979 and is a summary of DDA activities for the effort performed on the procurement and delivery of eleven (11) Allison GT 404-4 gas turbine engines and five (5) HT740CT and six (6) V730CT Allison automatic transmissions and the required associated software. The contract requires the delivery of eleven (11) Allison GT 404-4 Industrial Gas Turbine Engines and five (5) HT740CT and six (6) V730CT Allison Automatic Transmissions for the Greyhound and Transit Coaches, respectively. In addition, software items such as cost reports, technical reports, installationmore » drawings, acceptance test data and parts lists are required. A recent decision by the DOE will modify the build configuration for the last four (4) Transit Coach engines. It was decided by the DOE at a meeting in Washington, DC on March 28, 1979 with representatives from DDA, NASA/LeRC, JPL and Booz-Allen and Hamilton that these engines will be built with ceramic regenerators. (TFD)« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Davis, H.T.; Scriven, L.E.
1982-01-01
A major program of university research, longer-ranged and more fundamental in approach than industrial research, into basic mechanisms of enhancing petroleum recovery and into underlying physics, chemistry, geology, applied mathematics, computation, and engineering science has been built at Minnesota. The 1982 outputs of the interdisciplinary team of investigators were again ideas, instruments, techniques, data, understanding and skilled people: forty-one scientific and engineering papers in leading journals; four pioneering Ph.D. theses; numerous presentations to scientific and technical meetings, and to industrial, governmental and university laboratories; vigorous program of research visits to and from Minnesota; and two outstanding Ph.D.'s to research positionsmore » in the petroleum industry, one to a university faculty position, one to research leadership in a governmental institute. This report summarizes the 1982 papers and theses and features sixteen major accomplishments of the program during that year. Abstracts of all forty-five publications in the permanent literature are appended. Further details of information transfer and personnel exchange with industrial, governmental and university laboratories appear in 1982 Quarterly Reports available from the Department of Energy and are not reproduced here. The Minnesota program continues in 1983, notwithstanding earlier uncertainty about the DOE funding which finally materialized and is the bulk of support. Supplemental grants-in-aid from nine companies in the petroleum industry are important, as are the limited University and departmental contributions. 839 references, 172 figures, 29 tables.« less
The Development of a Conceptual Framework for New K-12 Science Education Standards (Invited)
NASA Astrophysics Data System (ADS)
Keller, T.
2010-12-01
The National Academy of Sciences has created a committee of 18 National Academy of Science and Engineering members, academic scientists, cognitive and learning scientists, and educators, educational policymakers and researchers to develop a framework to guide new K-12 science education standards. The committee began its work in January, 2010, released a draft of the framework in July, 2010, and intends to have the final framework in the first quarter of 2011. The committee was helped in early phases of the work by consultant design teams. The framework is designed to help realize a vision for science and engineering education in which all students actively engage in science and engineering practices in order to deepen their understanding of core ideas in science over multiple years of school. These three dimensions - core disciplinary ideas, science and engineering practices, and cross-cutting elements - must blend together to build an exciting, relevant, and forward looking science education. The framework will be used as a base for development of next generation K-12 science education standards.
Artistic and Industrial Institutions in Russian Education Structure in First Quarter of XXth Century
NASA Astrophysics Data System (ADS)
Chernyh, D. G.
2017-11-01
The article tells about the formation of Russian design education in the XXth century. It focuses on the peculiar features and causes of its insufficient effectiveness in the historical context. It studies the dynamics of changes in the priorities related to the artistic and industrial education in Russia and the connection of these processes with socio-political transformations. The article identifies the role of constructivist artists in the formation and approbation of advanced design-engineering techniques. It emphasizes the interdisciplinary essence of the profession of a designer as a special kind of design activities, its organizing, consolidating and progressive origin in the sphere of industrial production and carrying out interdisciplinary studies. It discloses the essence of a new “engineer-artist” profession. It briefly describes the influence of the fundamental principle of design - projectivity, on engineering and design disciplines when the interaction of an artist, an engineer and an architect is achieved on the basis of design, arrangement and inventive art as well as production organization where science and technology form the basis for creative work.
Peace Operations in the Former Yugoslavia: A Re-Evaluation
2010-12-01
currency, and were susceptible to bribery and “ taxation ” by the Serbs, with up to a quarter of the 103...sponsored, and were even supported by the peace operations. Some UN peacekeepers, including the Turkish, Malaysian , Bangladeshi, and Maltese, are known
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jubin, R.T.
2001-04-16
This report summarizes the major activities conducted in the Chemical and Energy Research Section of the Chemical Technology Division at Oak Ridge National Laboratory (ORNL) during the period July-September 1999. The section conducts basic and applied research and development in chemical engineering, applied chemistry, and bioprocessing, with an emphasis on energy-driven technologies and advanced chemical separations for nuclear and waste applications. The report describes the various tasks performed within ten major areas of research: Hot Cell Operations, Process Chemistry, Molten Salt Reactor Experiment (MSRE) Remediation Studies, Chemistry Research, Physical Properties Research, Biochemical Engineering, Separations and Materials Synthesis, Fluid Structures andmore » Properties, Biotechnology Research, and Molecular Studies. The name of a technical contact is included with each task described, and readers are encouraged to contact these individuals if they need additional information. Activities conducted within the area of the Cell Operations involved the testing of two continuously stirred tank reactors in series to evaluate the Savannah River-developed process of small-tank tetraphenylborate precipitation to remove cesium, strontium and transuranics from supernatant. Within the area of Process Chemistry, various topics related to solids formation in process solutions from caustic treatment of Hanford sludge were addressed. Saltcake dissolution efforts continued, including the development of a predictive algorithm. New initiatives for the section included modeling activities centered on detection of hydrogen in {sup 233}U storage wells and wax formation in petroleum mixtures, as well as support for the Spallation Neutron Source (investigation of transmutation products formed during operation). Other activities involved in situ grouting and evaluation of options for use (i.e., as castable shapes) of depleted uranium. In a continuation of activities of the preceding quarter, MSRE Remediation Studies focused on recovery of {sup 233}U and its conversion to a stable oxide and radiolysis experiments to permit remediation of MSRE fuel salt. Investigation of options for final disposition of the {sup 233}U inventory represents a new initiative within this area. In the area of Chemistry Research, activities included studies relative to molecular imprinting for use in areas such as selective sorption, chemical sensing, and catalysis, as well as spectroscopic investigation into the fundamental interaction between ionic solvents and solutes in both low- and high-temperature ionic liquids.« less
A review of acoustic dampers applied to combustion chambers in aerospace industry
NASA Astrophysics Data System (ADS)
Zhao, Dan; Li, X. Y.
2015-04-01
In engine combustion systems such as rockets, aero-engines and gas turbines, pressure fluctuations are always present, even during normal operation. One of design prerequisites for the engine combustors is stable operation, since large-amplitude self-sustained pressure fluctuations (also known as combustion instability) have the potential to cause serious structural damage and catastrophic engine failure. To dampen pressure fluctuations and to reduce noise, acoustic dampers are widely applied as a passive control means to stabilize combustion/engine systems. However, they cannot respond to the dynamic changes of operating conditions and tend to be effective over certain narrow range of frequencies. To maintain their optimum damping performance over a broad frequency range, extensive researches have been conducted during the past four decades. The present work is to summarize the status, challenges and progress of implementing such acoustic dampers on engine systems. The damping effect and mechanism of various acoustic dampers, such as Helmholtz resonators, perforated liners, baffles, half- and quarter-wave tube are introduced first. A summary of numerical, experimental and theoretical studies are then presented to review the progress made so far. Finally, as an alternative means, ';tunable acoustic dampers' are discussed. Potential, challenges and issues associated with the dampers practical implementation are highlighted.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sandstrom, Matthew M.
2012-03-30
This is the final report for a grant-funded project to financially assist and otherwise provide support to projects that increase E85 infrastructure in Michigan at retail fueling locations. Over the two-year project timeframe, nine E85 and/or flex-fuel pumps were installed around the State of Michigan at locations currently lacking E85 infrastructure. A total of five stations installed the nine pumps, all providing cost share toward the project. By using cost sharing by station partners, the $200,000 provided by the Department of Energy facilitated a total project worth $746,332.85. This project was completed over a two-year timetable (eight quarters). The firstmore » quarter of the project focused on project outreach to station owners about the incentive on the installation and/or conversion of E85 compatible fueling equipment including fueling pumps, tanks, and all necessary electrical and plumbing connections. Utilizing Clean Energy Coalition (CEC) extensive knowledge of gasoline/ethanol infrastructure throughout Michigan, CEC strategically placed these pumps in locations to strengthen the broad availability of E85 in Michigan. During the first and second quarters, CEC staff approved projects for funding and secured contracts with station owners; the second through eighth quarters were spent working with fueling station owners to complete projects; the third through eighth quarters included time spent promoting projects; and beginning in the second quarter and running for the duration of the project was spent performing project reporting and evaluation to the US DOE. A total of 9 pumps were installed (four in Elkton, two in Sebewaing, one in East Lansing, one in Howell, and one in Whitmore Lake). At these combined station locations, a total of 192,445 gallons of E85, 10,786 gallons of E50, and 19,159 gallons of E30 were sold in all reporting quarters for 2011. Overall, the project has successfully displaced 162,611 gallons (2,663 barrels) of petroleum, and reduced regional GHG emissions by 375 tons in the first year of station deployment.« less
DOE/KEURP site operator program. Year 3, Second Quarter Report, October 1--December 31, 1993
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
Kansas State University, with funding support from federal, state, public, and private companies, is participating in the Department of Energy`s Electric Vehicle Site Operator Program. Through participation in this program, Kansas State is displaying, testing, and evaluating electric or hybrid vehicle technology. This participation will provide organizations the opportunity to examine the latest EHV prototypes under actual operating conditions. KSU has purchased several electric cars and proposes to purchase additional electric vehicles. KSU has purchased one G-Van built by Conceptor Industries, Toronto, Canada and has procured two (2) Soleq 1993 Ford EVcort station wagons. During calendar year 1994, the Kansas`more » electric vehicle program expects to purchase a minimum of four and a maximum of eleven additional electric vehicles. The G-Van was signed in order for the public to be aware that it was an electric vehicle. Financial participants` names have been stenciled on the back door of the van. The Soleq EvCorts have not been signed. In order to demonstrate the technology as feasible, the EvCorts were deliberately not signed. The goal is to generate a public perception that this vehicle is no different from any similar internal combustion engine vehicle. Magnetic signs have been made for special functions to ensure sponsor support is recognized and acknowledged.« less
An efficient interpolation filter VLSI architecture for HEVC standard
NASA Astrophysics Data System (ADS)
Zhou, Wei; Zhou, Xin; Lian, Xiaocong; Liu, Zhenyu; Liu, Xiaoxiang
2015-12-01
The next-generation video coding standard of High-Efficiency Video Coding (HEVC) is especially efficient for coding high-resolution video such as 8K-ultra-high-definition (UHD) video. Fractional motion estimation in HEVC presents a significant challenge in clock latency and area cost as it consumes more than 40 % of the total encoding time and thus results in high computational complexity. With aims at supporting 8K-UHD video applications, an efficient interpolation filter VLSI architecture for HEVC is proposed in this paper. Firstly, a new interpolation filter algorithm based on the 8-pixel interpolation unit is proposed in this paper. It can save 19.7 % processing time on average with acceptable coding quality degradation. Based on the proposed algorithm, an efficient interpolation filter VLSI architecture, composed of a reused data path of interpolation, an efficient memory organization, and a reconfigurable pipeline interpolation filter engine, is presented to reduce the implement hardware area and achieve high throughput. The final VLSI implementation only requires 37.2k gates in a standard 90-nm CMOS technology at an operating frequency of 240 MHz. The proposed architecture can be reused for either half-pixel interpolation or quarter-pixel interpolation, which can reduce the area cost for about 131,040 bits RAM. The processing latency of our proposed VLSI architecture can support the real-time processing of 4:2:0 format 7680 × 4320@78fps video sequences.
NASA Astrophysics Data System (ADS)
Bakar Hasan, Abu; Fatah Abdul, Abdul; Selamat, Zalilah
2018-01-01
Critical claims by certain quarters that our local undergraduates are not performing well in Mathematics, Statistics and Numerical Methods needs a serious thinking and actions. Yearly examinations results from the Sijil Pelajaran Malaysia (SPM equivalent to A-Level) and Sijil Tinggi Pelajaran Malaysia (STPM equivalent to O-Level) levels have been splendid whereby it is either increasing or decreasing in a very tight range. A good foundation in mathematics and additional mathematics will tremendously benefit these students when they enter their university education especially in engineering and science courses. This paper uses SPM results as the primary data, questionnaires as secondary, and apply the Fish Bones technique for analysis. The outcome shows that there is a clear correlation between the causes and effect.
Skylab experiment M487 habitability/crew quarters
NASA Technical Reports Server (NTRS)
Johnson, C. C.
1975-01-01
Results of Skylab experiment M487 (habitability/crew quarters), which was designed to evaluate the habitability features of Skylab, were presented. General observations and conclusions drawn from the data obtained are presented in detail. The objectives of the experiment, the manner in which data was acquired, and the instruments used to support the experiments are described. Illustrations and photographs of the living and work areas of Skylab and some of the habitability features are provided. Samples of the subjective evaluation questionnaires used by the crewmen are included. Habitability-related documents, crewmen biographies, functional characteristics and photographs of the instruments used, and details of Skylab compartment sizes and color schemes are included as appendixes.
ERIC Educational Resources Information Center
Washington State Legislative Council, Olympia.
The Joint Committee was directed to study (1) the four quarter system for public schools; (2) other variations and adaptations of a 12-month school year, including the feasibility of a State supported, tuition-free, summer educational and recreational program; and (3) educational, vocational, and recreational programs, supported by fees or…
Special Inspector General for Iraq Reconstruction, Quarterly Report to the United States Congress
2008-04-30
political track receives 19% of total fund- ing, assisting the GOI in strengthening core ministry functions and supporting gover - nance-building...Additionally, the LGP has trained 2,000 council members (15% women), 28 gover - nors, 42 deputy governors, 420 director generals, and key staff in 380...support enterprises • tourism The planning effort involved direct contact between industry representatives and KRG lead- ership, facilitated by
2008-10-30
RECONSTRUCTION INITIATIVES AFGHANISTAN RECONSTRUCTION INITIATIVES Framework for Current U.S. Funding Current U.S. support to Afghanistan...reconstruction is based on the Foreign Assistance Framework as set forth in the Department of State’s most recent Congressional Budget Justi cation for 2008 and...Humanitarian Assistance • The Framework supports the goal of aiding in the development of “democratic, well-governed states that respond to the
2002-06-01
Countermeasures Unit Chief Special Events Management Unit Chief Domestic Terrorism/ Counterterrorism Section Chief International Terrorism Section...Asstistant Director Counter- Terrorism Division Figure 3 Division/Section/Unit Hierarchies The LNO also supports the Special Events Management Unit (SEMU
75 FR 57277 - Agency Information Collection Activities: Proposed Collection: Comment Request
Federal Register 2010, 2011, 2012, 2013, 2014
2010-09-20
... patients served, pharmaceuticals prescribed, pricing, and other sources of support to provide AIDS... formulary, eligibility criteria for enrollment, and cost-saving strategies including coordinating with Medicaid). The quarterly report represents the best method for HRSA to determine how ADAP grants are being...
Ongoing data reduction, theoretical studies, and supporting research in magnetospheric physics
NASA Technical Reports Server (NTRS)
Scarf, F. L.; Greenstadt, E. W.
1982-01-01
The investigators published a very large number of space science research papers, and in almost all cases these papers involved correlative multi-spacecraft studies. A tabulation of these research papers is provided. Quarterly progress reports for the second contractual period are included.
Tranexamic Acid Mechanisms and Pharmacokinetics In Traumatic Injury
2017-10-01
members of the DSMB have been presented interim data during their quarterly meetings. Journal publications. Nothing to Report Books or other non...to relevant references supporting the purpose of this study. Technologies or techniques Nothing to Report 4 Inventions, patent applications, and
NASA Astrophysics Data System (ADS)
Vazquez, J. L.; Serrano, A.; Caniego, J.
2012-04-01
Due to the introduction of new degrees on the College of Agricultural Engineering of the Technical University of Madrid adapted to the European Space for Higher Education (Bologna), we have made a comparative study of academic achievement obtained by the students during their first year at the Centre according to different curricula. We used data from 2 curricula leading to the degree in Agricultural Engineering, Curriculumn 74 (6 years and annual structure) and Curriculum 96 modified in 2006 (5 years with quarterly structure) and the new curriculum in grades (4 years semi-structured). It has been used as a data source, the qualifications of new students during the last three years prior to the extinction of the curriculum.The study shows that current rates of academic success or failure and dropout during the first year of college are very similar to those happening 12 years ago, when it was assumed that the preparation of students from high school was much higher than today. Keywords: Academic performance, curricula, Bologna.
Torikai, J.D.
1995-01-01
This report contains hydrologic and climatic data that describe the status of ground-water resources at U.S. Navy Support Facility, Diego Garcia. Data are presented from January 1991 through December 1993. This report concentrates on data from fourth quarter 1993, and references historic data from 1991 and 1992. Total rainfall for 1993 was 95 inches which is 10 percent below the mean annual rainfall of 106 inches. In comparison, total rainfalls in 1992 and 1991 were 93 inches and 130 inches, respectively. Ground-water withdrawal has averaged 954,000 gallons per day during 1993, while with- drawals in 1992 and 1991 averaged 936,000 gallons per day and 927,000 gallons per day, respectively. In each of the five areas of ground-water produc- tion, withdrawals have remained steady since 1991. At the end of December 1993, the chloride concen- tration of the composite water supply was 36 milligrams per liter, well below the 250 milligrams per liter secondary drinking water standard established by the U.S. Environmental Protection Agency. Chloride concentrations of the composite water supply during the last quarter (October through December 1993) ranged between 35 and 75 milligrams per liter. Chloride concentrations in monitoring wells at Cantonment and Air Operations decreased during the last quarter (October through December 1993) after having risen progressively during the previous quarter (July through September 1993). There has been a general trend of increasing chloride concentrations in the deeper monitoring wells since the 1992 dry season, which began in March 1992. A fuel spill at Air Operations caused the shutdown of ten wells in May 1991. Four of the wells resumed pumping for water supply purposes in April 1992. The remaining six wells are being used to hydraulically contain and divert fuel migration.
Support for School Construction: Blending Sales Tax with Property Tax.
ERIC Educational Resources Information Center
Haney, David W.; Schmidt, Mark
2002-01-01
Describes how opinion by North Dakota's attorney general allows school district and city of Jamestown to collaborate in the issuance of bonds for school construction and renovation projects, three-quarters of the revenue for which is raised by a voter-approved city sales tax. (PKP)
75 FR 4523 - Submission for OMB Review; Comment Request
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-28
... estimates support the NASS strategic plan to cover all agricultural cash receipts. The authority to collect.... Description of Respondents: Farms; Business or other for-profit. Number of Respondents: 63,305. Frequency of Responses: Reporting: On occasion; Annually; Quarterly; Semi-annually; Monthly. Total Burden Hours: 16,489...
76 FR 79646 - Submission for OMB Review; Comment Request
Federal Register 2010, 2011, 2012, 2013, 2014
2011-12-22
... estimates support the NASS strategic plan to cover all agricultural cash receipts. The authority to collect.... Description of Respondents: Farms; Business or other for-profit. Number of Respondents: 63,305. Frequency of Responses: Reporting: On occasion; Annually; Quarterly; Semi-annually; Monthly. Total Burden Hours: 16,489...
Mass Notification for Higher Education
ERIC Educational Resources Information Center
Schneider, Tod
2010-01-01
Mass notification is a high priority in educational institutions. As the number of electronic communication devices has diversified, so has the complexity of designing an effective mass notification system. Picking the right system, with the right features, support services and price, can be daunting. This publication, updated quarterly due to…
1987-03-01
intelligent way, assemble those documents and data in usable formats, examine the communications tapes available for this project, and to develop a sampling...Lifetime Learning Publications, Belmont. CA. 1982. Rowe. Neil C.. Artifcial Intelligence , Draft Copv, Class Notes for Winter Quarter. CS 33 10, \\aval...AT2 122 BATTLEFIELD MANAGEMENT SYSTEM DATA REQUIRENTS TO 1/2 SUPPORT PASSAGE OF COMPANY LEVEL TACTICAL INFORMATION (U) NVALE POSTGRADUATE SCHOOL
NASA Technical Reports Server (NTRS)
Panait, Claudia M.
2004-01-01
The NASA Glenn Library is a science and engineering research library providing the most current books, journals, CD-ROM's and documents to support the study of aeronautics, space propulsion and power, communications technology, materials and structures and microgravity science. The GRC technical library also supports the research and development efforts of all scientists and engineers on site via full text electronic files, literature searching, technical reports, etc. As an intern in the NASA Glenn Library, I attempt to support these objectives through efficiently and effectively fulfilling the assignment that was given to me. The assignment that was relegated to me was to catalog National Advisory Committee for Aeronautics, NASA Technical Documents into NASA Galaxie. This process consists of holdings being added to existing Galaxie records, upgrades and editing done to the bibliographic records when needed, adding URL's into Galaxie when they were missing from the record. NASA ASAP and Digidoc was used to locate URL's of PDF's that were not in Galaxie. A spreadsheet of documents with no URL's were maintained. Also, a subject channel of web, fill-text, paid and free, journal and other subject specific pages were developed and expanded fiom current content of intranet pages. To expand upon the second half of my assignment, I was given the project of taking inventory of the library s book collection. I kept record of the books that were not accounted for on a master list I was given to work fiom and submitted them for correction and addition. I also made sure the books were placed in the appropriate order and made corrections to any discrepancies that existed between the master list and what was on the shelf. Upon completion of this assignment, I will have verified that 21,113 books were in the correct location, order and have the correct corresponding serial number and barcode. In conclusion, as of this date I have input around 750 documents into NASA Galaxie, inputting about half of the NASA Technical Documents into the system. The rest of my tenure in this program will consist of finishing the other half of the reports. In regard to the second assignment, I still have about three-quarters of the collection to record and correct.
Clinical presentation and manual therapy for lower quadrant musculoskeletal conditions.
Courtney, Carol A; Clark, Jeffrey D; Duncombe, Alison M; O'Hearn, Michael A
2011-11-01
Chronic lower quadrant injuries constitute a significant percentage of the musculoskeletal cases seen by clinicians. While impairments may vary, pain is often the factor that compels the patient to seek medical attention. Traumatic injury from sport is one cause of progressive chronic joint pain, particularly in the lower quarter. Recent studies have demonstrated the presence of peripheral and central sensitization mechanisms in different lower quadrant pain syndromes, such as lumbar spine related leg pain, osteoarthritis of the knee, and following acute injuries such as lateral ankle sprain and anterior cruciate ligament rupture. Proper management of lower quarter conditions should include assessment of balance and gait as increasing pain and chronicity may lead to altered gait patterns and falls. In addition, quantitative sensory testing may provide insight into pain mechanisms which affect management and prognosis of musculoskeletal conditions. Studies have demonstrated analgesic effects and modulation of spinal excitability with use of manual therapy techniques, with clinical outcomes of improved gait and functional ability. This paper will discuss the evidence which supports the use of manual therapy for lower quarter musculoskeletal dysfunction.
Unique CAD/CAM three-quarter crown restoration of a central incisor: a case report.
Goldberg, Marvin B; Siegel, Sharon C; Rezakani, Niloufar
2013-07-01
Computer-aided design and computer-aided manufacturing (CAD/CAM) dentistry has been in use for more than 2 decades. Recent improvements in this technology have made CAD/CAM restorations a viable alternative for routine dental care. This technology is being taught in dental schools to prepare students for contemporary dental practice and is particularly useful in unique restorative situations that allow conservation of tooth structure. This case report describes the restoration of a central incisor that was previously restored with an unesthetic three-quarter gold crown. The tooth exhibited recurrent caries and an unaffected labial wall of supported enamel. A CAD/CAM three-quarter crown was planned to conserve tooth structure. After preparation, the tooth was scanned for a CAD/CAM crown in order to fabricate a ceramic restoration, which was then milled and bonded, producing an esthetic result. Typically, in cases of esthetic enhancement, a labial laminate restoration is fabricated, but in this situation, a different approach was necessary to make a design for the lingual surface of an anterior tooth.
Castles in the Far East: The U.S. Army Corps of Engineers Okinawa and Japan Districts 1945-1990
1990-10-01
on L Day, April!, 1945, in what was to become the last major battle of World War II. They met with little resistance on the beaches but Okinawa was...facilities and a new handball court, tennis courts and exercise rooms along with larger living quarters. By 1987 several facilities for the F/A-18...completion. was the damage done to Pier Bravo at White Beach . A big chunk of the pier was literally washed away and the remainder of the pier suffered
Sonar Test and Test Instrumentation Support.
1976-11-10
AD-AI0 TEXAS UNIV AT AUSTIN APPLIED RESEARCH LARS F/6 17/1 SONAR TEST AND TEST INSTRUMENTATION SUPPDRT.1U) NoV 76 0 0 BAKER N00140-76-C-&687...UNCLASSIFIED_ NL i 0 00 THE UNIVERSITY OF TEXAS AT AUSTIN 10 November 1976 Copy No. 3 SONAR TEST AND TEST INSTRUMENTATION SUPPORT Quarterly Progress...8217 mi a - I TABLE OF CONTENTS A pag. I. INTRODUCTION 1 II. AN/FQM-IO(V) SONAR TEST SET FIELD SUPPORT 3 A. Introduction 3 B. Visit to NAVSHIPYD PEARL 3 C
Providing Co-Curricular Support: A Multi-Case Study of Engineering Student Support Centers
ERIC Educational Resources Information Center
Lee, Walter C., Jr.
2015-01-01
In response to the student retention and diversity issues that have been persistent in undergraduate engineering education, many colleges have developed Engineering Student Support Centers (ESSCs) such as Minority Engineering Programs (MEPs) and Women in Engineering Programs (WEPs). ESSCs provide underrepresented students with co-curricular…
Success for All®. What Works Clearinghouse Intervention Report. Updated
ERIC Educational Resources Information Center
What Works Clearinghouse, 2017
2017-01-01
"Success for All" ("SFA"®) is a whole-school reform model (that is, a model that integrates curriculum, school culture, family, and community supports) for students in prekindergarten through grade 8. "SFA"® includes a literacy program, quarterly assessments of student learning, a social-emotional development program,…
Parameters, U.S. Army War College Quarterly. Volume 23, Number 2, Summer 1993
1993-01-01
conventional combat. Drug Trafficking In many cases, Sendero has allied itself with the narcoiraffickers to gain needed financial support. Peruvian...and sometimes identical) heterosexual shenanigans could be assembled from the popular. soft-porn press. The other problem is that just as there is
78 FR 45490 - Department of State Acquisition Regulation
Federal Register 2010, 2011, 2012, 2013, 2014
2013-07-29
... being added due to the need to obtain current data to support the Department of State (DOS) financial statements. From a financial accounting perspective, DOS must have a way of keeping track of its capital... DOSAR 652.245- 71, Accounting for Government Property, requests quarterly reporting of U.S. Department...
USDA-ARS?s Scientific Manuscript database
Background/Question/Methods Livestock grazing is the primary activity on rangelands that encompass nearly half of the Earth’s terrestrial surface and directly supports a quarter of the world’s population. With one person in t...
2002-03-01
sections consists of four units, the Domestic Terrorism Operations Unit, the WMD Operations Unit, the WMD Countermeasures Unit, and Special Events Management Unit...Countermeasures Unit Chief Special Events Management Unit Chief Domestic Terrorism/ Counterterrorism Section Chief International Terrorism Section Asstistant
Curriculum and Methods (EDS 300).
ERIC Educational Resources Information Center
McNaughton, Robert H.; And Others
This course is a team taught, 12 quarter-hour block course, which combines a general teaching, competency segment and a specialized subject area methods segment. It is required of all students seeking secondary certification and is supported out of the regular secondary department budget. The teaching competency segment has the following three…
76 FR 4361 - Agency Information Collection Activities: Submission for OMB Review: Comment Request
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-25
... served, pharmaceuticals prescribed, pricing, sources of support to provide AIDS medication treatment... for enrollment, and cost-saving strategies including coordination with Medicaid). The quarterly report represents the best method for HRSA to determine how ADAP Grants are expended and to provide answers to...
78 FR 11670 - Notice of ACHP Quarterly Business Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2013-02-19
... Preservation Awards IV. Chairman's Report V. ACHP Management Issues A. ACHP FY 2013 and 2014 Budget B. Alumni Foundation Report VI. Historic Preservation Policy and Programs A. ACHP Plan To Support the United Nations... War to Civil Rights Initiative F. Future Directions for the ACHP in Sustainability G. Rightsizing Task...
Washington Community Colleges Factbook.
ERIC Educational Resources Information Center
Meier, Terre
The 109 tables and graphs in this six-chapter factbook present a statistical profile of the Washington Community College System for Fall 1979. Chapter I presents background information on the history and organization of the 27 state-supported colleges. Chapter II outlines data on annual and quarterly enrollments from 1969 through 1979; student…
NASA Technical Reports Server (NTRS)
Quinn, Todd M.; Walters, Jerry L.
1991-01-01
Future space explorations will require long term human presence in space. Space environments that provide working and living quarters for manned missions are becoming increasingly larger and more sophisticated. Monitor and control of the space environment subsystems by expert system software, which emulate human reasoning processes, could maintain the health of the subsystems and help reduce the human workload. The autonomous power expert (APEX) system was developed to emulate a human expert's reasoning processes used to diagnose fault conditions in the domain of space power distribution. APEX is a fault detection, isolation, and recovery (FDIR) system, capable of autonomous monitoring and control of the power distribution system. APEX consists of a knowledge base, a data base, an inference engine, and various support and interface software. APEX provides the user with an easy-to-use interactive interface. When a fault is detected, APEX will inform the user of the detection. The user can direct APEX to isolate the probable cause of the fault. Once a fault has been isolated, the user can ask APEX to justify its fault isolation and to recommend actions to correct the fault. APEX implementation and capabilities are discussed.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Harlos, D.P.; Edgerton, E.S.
1994-12-31
The US EPA has, under the auspices of the CASTNet program (Clean Air Status and Trends Network), initiated the CASTNet Air Toxics Monitoring Program (CATMP). Volatile Organic Compounds (VOC) and carbonyls and metals are sampled for 24-hour periods on a 12-day schedule using TO-14 samplers (SUMMA canisters) and dinitrophenylhydrazine-coated (dmph) sorbent cartridges and high volume particle samplers. Sampling was begun at most sites in July of 1993. The sites are operated by state and local air pollution control programs and all analysis is performed by Environmental Science and Engineering (ESE) in Gainesville, Florida. The network currently supports 15 VOC sites,more » of which 7 also sample carbonyls. Three sites sample metals only in Pinellas County, Florida. The limits of detection of 0.05 ppb for VOCs allow routine tracking of a wide range of pollutants including several greenhouse gases, transportation pollutants and photochemically-derived compounds. The sites range from major urban areas (Chicago, St. Louis) to a rural village (Waterbury, Vermont). Results of the first three quarters of VOC and carbonyl data collection are summarized in this presentation.« less
A Compendium of Energy Conservation Success Stories
DOE R&D Accomplishments Database
1988-09-01
Three-quarters of DOE's Conservation R and D funds have been devoted to technology research and development: basic and applied research, exploratory R and D, engineering feasibility studies, pilot-scale prototype R and D, and technology demonstration. Non R and D projects have involved technology assessment program planning and analysis, model development, technology transfer and consumer information, health effects and safety research, and technical support for rule making. The success stories summarized in this compendium fall into three general categories: Completed Technology Success Stories, projects that have resulted in new energy-saving technologies that are presently being used in the private sector; Technical Success Stories, projects that have produced or disseminated important scientific/technical information likely to result in future energy savings; Program Success Stories, non-R and D activities that have resulted in nationally significant energy benefits. The Energy Conservation research and development program at DOE is managed by the Office of Conservation under the direction of the Deputy Assistant Secretary for Conservation. Three subordinate Program Offices correspond to the buildings, transportation, and industrial end-use sectors. A fourth subordinate Program Office{endash}Energy Utilization Research{endash}sponsors research and technical inventions for all end-use sectors.
NASA Technical Reports Server (NTRS)
1995-01-01
The purpose of this contract was to provide optomechanical engineering and fabrication support to the Solar X-ray Imager (SXI) program in the areas of mirror, optical bench and camera assemblies of the telescope. The Center for Applied Optics (CAO) worked closely with the Optics and S&E technical staff of MSFC to develop and investigate the most viable and economical options for the design and fabrication of a number of parts for the various telescope assemblies. All the tasks under this delivery order have been successfully completed within budget and schedule. A number of development hardware parts have been designed and fabricated jointly by MSFC and UAH for the engineering model of SXI. The major parts include a nickel electroformed mirror and a mirror mount, plating and coating of the ceramic spacers, and gold plating of the contact rings and fingers for the camera assembly. An aluminum model of the high accuracy sun sensor (HASS) was also designed and fabricated. A number of fiber optic tapers for the camera assembly were also coated with indium tin oxide and phosphor for testing and evaluation by MSFC. A large number of the SXI optical bench parts were also redesigned and simplified for a prototype telescope. These parts include the forward and rear support flanges, front aperture plate, the graphite epoxy optical bench and a test fixture for the prototype telescope. More than fifty (50) drawings were generated for various components of the prototype telescope. Some of these parts were subsequently fabricated at UAH machine shop or at MSFC or by the outside contractors. UAH also provide technical support to MSFC staff for a number of preliminary and critical design reviews. These design reviews included PDR and CDR for the mirror assembly by United Technologies Optical Systems (UTOS), and the program quarterly reviews, and SXI PDR and CDR. UAH staff also regularly attended the monthly status reviews, and made a significant number of suggestions to improve the design, assembly and alignment of the telescope. Finally, a high level assembly and alignment plan for the entire telescope was prepared by UAH. This plan addresses the sequence of assembly, the required assembly and alignment tolerances, and the methods to verify the alignment at each step during the assembly process. This assembly and alignment plan will be used to assemble and integrate the engineering model (EM) of the telescope. Later on, based on this plan more detailed assembly and alignment procedures will be developed for the lower-level assemblies of SXI.
2011-04-30
U.S. Justice Sector Support Program Operating under INL, the Justice Sector Support Program ( JSSP ) aims to develop the capacity of the Afghan criminal...investigators graduated from JSSP legal training programs.252 The JSSP also added to the number of U.S. and local Afghan lawyers on its staff, growing...drafting guidelines for an extension of the JSSP based on experiences in the preceding year. Anticipated changes include moving some functions into the
4. Northeast corner of quarters (executive officer's quarters), looking onto ...
4. Northeast corner of quarters (executive officer's quarters), looking onto Quarter R (commanding officer's quarters), looking southeast - Naval Air Station Chase Field, Texas State Highway 202, 4.8 miles east of intersection of Texas State Highway 202 & U.S. State Highway 181, Beeville, Bee County, TX
Characteristics of HIV Care and Treatment in PEPFAR-Supported Sites
Filler, Scott; Berruti, Andres A.; Menzies, Nick; Berzon, Rick; Ellerbrock, Tedd V.; Ferris, Robert; Blandford, John M.
2011-01-01
Background The U.S. President’s Emergency Plan for AIDS Relief (PEPFAR) has supported the extension of HIV care and treatment to 2.4 million individuals by September 2009. With increasing resources targeted toward scale-up, it is important to understand the characteristics of current PEPFAR-supported HIV care and treatment sites. Methods Forty-five sites in Botswana, Ethiopia, Nigeria, Uganda, and Vietnam were sampled. Data were collected retrospectively from successive 6-month periods of site operations, through reviews of facility records and interviews with site personnel between April 2006 and March 2007. Facility size and scale-up rate, patient characteristics, staffing models, clinical and laboratory monitoring, and intervention mix were compared. Results Sites added a median of 293 patients per quarter. By the evaluation’s end, sites supported a median of 1,649 HIV patients, 922 of them receiving antiretroviral therapy (ART). Patients were predominantly adult (97.4%) and the majority (96.5%) were receiving regimens based on nonnucleoside reverse transcriptase inhibitors (NNRTIs). The ratios of physicians to patients dropped substantially as sites matured. ART patients were commonly seen monthly or quarterly for clinical and laboratory monitoring, with CD4 counts being taken at 6-month intervals. One-third of sites provided viral load testing. Cotrimoxazole prophylaxis was the most prevalent supportive service. Conclusions HIV treatment sites scaled up rapidly with the influx of resources and technical support through PEPFAR, providing complex health services to progressively expanding patient cohorts. Human resources are stretched thin, and delivery models and intervention mix differ widely between sites. Ongoing research is needed to identify best-practice service delivery models. PMID:21346585
12 CFR 1777.10 - Developments prompting supervisory response.
Code of Federal Regulations, 2011 CFR
2011-01-01
...) An Enterprise's publicly reported net income for the most recent calendar quarter is less than one-half of its average quarterly net income for any four-quarter period during the prior eight quarters... than one-half of its average NIM for any four-quarter period during the prior eight quarters; (d) For...
No Federal Programs are Designed Primarily to Support Engineering Education, but Many Do.
ERIC Educational Resources Information Center
General Accounting Office, Washington, DC.
Federal civilian agency support for engineering education in 1980 is described. The support is placed in categories, current concerns about the supply of engineers and conditions of engineering schools are related to the support, and the changes made by the fiscal year 1982 budget are identified. It was found that 38 programs in 11 federal…
Swenson, G. H.
1979-01-01
Four dose levels of novobiocin (50, 200, 400, 600 mg) were compared with no drug for the intramammary treatment of Staphylococcus aureus, Streptococcus agalactiae and other streptococcal infections present in the udder of dairy cows at the initiation of the dry period. Treatment success was evaluated by comparing the microbiological status of duplicate pretreatment quarter milk samples collected at drying off with the microbiological status of duplicate quarter milk samples collected four to ten days postcalving. Infection status of 1318 cows in 75 herds in five geographic locations was determined. Treatment effects on infected cows were evaluated by least squares analysis of variance with treatment, herd, lactation number, days dry and milk production at drying off considered as variables. The dose of 400 mg novobiocin per quarter was demonstrated to be significantly more effective (P < 0.05) than no drug and significantly better than (P < 0.05) or equal to the other doses for curing infections caused by S. aureus, S. agalactiae and other streptococci. A significant reduction (P < 0.05) in the overall rate of new udder infections acquired during the dry period was observed in cows treated with ≥ 200 mg novobiocin at drying off. The data supported the conclusion that the cow rather than the quarter is the appropriate experimental unit in the evaluation of intramammary mastitis treatments. Herd and lactation number were the most significant variables affecting cures. PMID:548166
Rahman, Md Saydur; Takemura, Akihiro; Takano, Kazunori
2002-01-01
To assess the relationship between lunar cycle and steroidogenesis in the ovaries of the golden rabbitfish, Siganus guttatus, the intact follicles of oocytes were incubated in vitro with human chorionic gonadotropin (hCG) and seven steroid hormones, 17alpha,20beta-dihydroxy-4-pregnen-3-one (DHP), 17alpha,20beta,21-trihydroxy-4-pregnen-3-one (20beta-S), 17alpha-hydroxyprogesterone (17alpha-OHP), progesterone (P), cortisol, estradiol-17beta (E2) and testosterone, during the two lunar phases, the new moon (1 week before spawning) and the first lunar quarter (just before spawning). Around the new moon, germinal vesicle breakdown (GVBD) could not be induced by addition of hCG or any steroid hormones. Around the first lunar quarter, GVBD was induced by addition of hCG, DHP, 20beta-S, 17alpha-OHP, P, and cortisol. DHP was the most potent steroid hormone. When the intact follicles of oocytes were incubated with hCG in both lunar phases, the production of E2 and DHP measured by enzyme immunoassay decreased and increased significantly from the new moon to the first lunar quarter, respectively. These results suggest that the ovarian follicles produce E2 around the new moon and DHP around the first lunar quarter and that the production/conversion of the steroid hormones is under the influence of gonadotropin(s). The synchronous increase in ovarian activity supports the hypothesis that lunar periodicity is a major factor for the ovarian development of S. guttatus.
77 FR 40026 - 36(b)(1) Arms Sales Notification
Federal Register 2010, 2011, 2012, 2013, 2014
2012-07-06
... and contractor logistics, Quality Assurance Team support services, engineering and technical support..., engineering and technical support, and other related elements of program support. The estimated cost is $49..., maintenance, or training is Confidential. Reverse engineering could reveal Confidential information...
Department of the Navy Innovation
submissions is 31 January 2018. Winners will be announced in Second Quarter CY2018. Trophy Design Contest: In support of the Innovation Awards above, the trophy design contest allows creative Sailors, Marines, and available. Questions may be submitted to DON_Innovation@navy.mil Trophy Design Contest Details Design
Executive Summary: Professional Partners Supporting Family Caregivers
ERIC Educational Resources Information Center
Kelly, Kathleen; Reinhard, Susan C.; Brooks-Danso, Ashley
2008-01-01
Today, more than three-quarters of adults who live in the community and need long-term care depend on family and friends as their only source of assistance with activities of daily living (such as bathing, dressing, and eating) or instrumental activities of daily living (such as transportation and managing finances). Research suggests that the…
Mother Love: Natural Mothering, Birth to Three Years.
ERIC Educational Resources Information Center
Bricklin, Alice G.
This book discusses aspects of natural parenthood based largely on the author's own experiences, with references to other supportive studies and expert opinions. Topics covered include emotional changes brought on by pregnancy; home type delivery; family sleeping quarters and baby-led nursing. Chapters are (1) On Becoming a Mother; (2) Conscious,…
Undocumented Students Ask Jesuit Higher Ed: "Just Us" or Justice?
ERIC Educational Resources Information Center
Ryscavage, Richard; Canaris, Michael M.
2013-01-01
More than three-quarters of administrators, faculty and staff at Jesuit colleges agree or strongly agree that "admitting, enrolling, and supporting undocumented students fits with the mission of the institution." And yet 40% recently said there were no known programs or outreach to undocumented students of which they were aware. There is…
ERIC Educational Resources Information Center
Berlin, Donna F.
The Berlin-White Action Research Model (BWARM) described here was designed to prepare and support teachers in the development, implementation, and evaluation of innovation within their classroom. The year-long program consists of three interrelated phases over four academic quarters: (1) "Pedagogical Awareness," designed to provide knowledge and…
Quarterly Update, January-March 1992
1992-03-01
representations to support exploiting that commonality. The project used the Feature-Oriented Domain Analysis ( FODA ) method, developed by the project in 1990, in...9 FODA feature-oriented domain analysis ................................... 14 FTP file transfer protocol...concentrations, and product market share for 23 countries. Along with other SEI staff, members of the Rate Monotonic Analysis for Real-Time Systems (RMARTS
Indigenous VET Research and Statistics: Terms and Definitions. Support Document
ERIC Educational Resources Information Center
National Centre for Vocational Education Research (NCVER), 2010
2010-01-01
This document covers the data terms used in the "Indigenous Research and Statistics" resources. It covers information contained in the "Apprentices and Trainees June Quarter 2009 report," the "Students and Courses 2009" report and the "Student Outcomes 2009" report and their associated data tables. The primary purpose of this document is to assist…
25 CFR 117.6 - Allowance for minors.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 25 Indians 1 2011-04-01 2011-04-01 false Allowance for minors. 117.6 Section 117.6 Indians BUREAU... Allowance for minors. The superintendent may disburse from the surplus funds of an Indian under 21 years of age not to exceed $300 quarterly for the support and maintenance of the minor. Disbursement may be...
The Boys in Schools Bulletin: Practical Initiatives Addressing Boys' Needs, 1999.
ERIC Educational Resources Information Center
Fletcher, Richard, Ed.; Browne, Rollo, Ed.
1999-01-01
This document is comprised of volume 2 of a quarterly bulletin for educators in Australia providing a practical focus to improving boys' schooling. The April 1999 issue focuses on the role of school executives, or administrators, on supporting educational initiatives. This issue includes articles describing the development of a program-based…
32 CFR 705.20 - Use of Navy material and facilities.
Code of Federal Regulations, 2014 CFR
2014-07-01
...) The program support must be within the command's public affairs responsibility. (2) The loan of the equipment must not interfere with the military mission of the command. (3) Equipment must be available... one per quarter per group). (4) Incident to group visits by the Boy Scouts of America, Boys Clubs of...
32 CFR 705.20 - Use of Navy material and facilities.
Code of Federal Regulations, 2012 CFR
2012-07-01
...) The program support must be within the command's public affairs responsibility. (2) The loan of the equipment must not interfere with the military mission of the command. (3) Equipment must be available... one per quarter per group). (4) Incident to group visits by the Boy Scouts of America, Boys Clubs of...
32 CFR 705.20 - Use of Navy material and facilities.
Code of Federal Regulations, 2013 CFR
2013-07-01
...) The program support must be within the command's public affairs responsibility. (2) The loan of the equipment must not interfere with the military mission of the command. (3) Equipment must be available... one per quarter per group). (4) Incident to group visits by the Boy Scouts of America, Boys Clubs of...
32 CFR 705.20 - Use of Navy material and facilities.
Code of Federal Regulations, 2010 CFR
2010-07-01
...) The program support must be within the command's public affairs responsibility. (2) The loan of the equipment must not interfere with the military mission of the command. (3) Equipment must be available... one per quarter per group). (4) Incident to group visits by the Boy Scouts of America, Boys Clubs of...
32 CFR 705.20 - Use of Navy material and facilities.
Code of Federal Regulations, 2011 CFR
2011-07-01
...) The program support must be within the command's public affairs responsibility. (2) The loan of the equipment must not interfere with the military mission of the command. (3) Equipment must be available... one per quarter per group). (4) Incident to group visits by the Boy Scouts of America, Boys Clubs of...
1991-12-01
Patillo, 1990). The administrative support element attempted to pattern itself after the clinical model, hoping to better manage shortages of personnel...Material ManaQement Quarterly, 11(3), 36-48. Thomas, C. (1989). Specialty beds: Decision making made easy. Ostomy -Wound Management, 23, 51-59. Thomson
2017-01-30
Nontraditional Defense Contractor Participation, and Plans for Next Quarter. II. Business Status Report. The business status report shall provide...DoD & DoD Contractors only. E. FINAL BUSINESS STATUS REPORT At the completion of the Ordnance Technology Initiative Agreement, the...traditional Contractors to produce advanced machining techniques that are required by the SPS group. • Provide acquisition support for reducing
Investigation of a New Intervention for Children with Word-Finding Problems
ERIC Educational Resources Information Center
Best, Wendy
2005-01-01
Background: Around one-quarter of children attending language support services have difficulty in retrieving words. Therapy studies with such children have shown that both semantic and phonological techniques can improve word finding. A new approach to intervention is described using a computerized aid that converts letters into sound cues. Aims:…
3. Southwest side of quarters R (commanding officer's quarters), looking ...
3. Southwest side of quarters R (commanding officer's quarters), looking east - Naval Air Station Chase Field, Quarters R, Essex Street, .43 mile South-Southeast of intersection of Texas State Highway 202 & Independence Street, Beeville, Bee County, TX
6. Interior of quarters (executive officer's quarters), living room, looking ...
6. Interior of quarters (executive officer's quarters), living room, looking west - Naval Air Station Chase Field, Quarters S, Essex Street, .45 mile South-Southeast of intersection of Texas State Highway 202 & Independence Street, Beeville, Bee County, TX
1. North side of quarters (executive officer's quarters), looking southeast ...
1. North side of quarters (executive officer's quarters), looking southeast - Naval Air Station Chase Field, Quarters S, Essex Street, .45 mile South-Southeast of intersection of Texas State Highway 202 & Independence Street, Beeville, Bee County, TX
5. East side of quarters (executive officer's quarters), looking west ...
5. East side of quarters (executive officer's quarters), looking west - Naval Air Station Chase Field, Quarters S, Essex Street, .45 mile South-Southeast of intersection of Texas State Highway 202 & Independence Street, Beeville, Bee County, TX
1. Northeast side of Quarters R (commanding officer's quarters), looking ...
1. Northeast side of Quarters R (commanding officer's quarters), looking west - Naval Air Station Chase Field, Quarters R, Essex Street, .43 mile South-Southeast of intersection of Texas State Highway 202 & Independence Street, Beeville, Bee County, TX
2. West side of quarters (executive officer's quarters), looking east ...
2. West side of quarters (executive officer's quarters), looking east - Naval Air Station Chase Field, Quarters S, Essex Street, .45 mile South-Southeast of intersection of Texas State Highway 202 & Independence Street, Beeville, Bee County, TX
2. Southeast side of Quarters R (commanding officer's quarters), looking ...
2. Southeast side of Quarters R (commanding officer's quarters), looking northwest - Naval Air Station Chase Field, Quarters R, Essex Street, .43 mile South-Southeast of intersection of Texas State Highway 202 & Independence Street, Beeville, Bee County, TX
4. Northwest side of Quarters R (commanding officer's quarters), looking ...
4. Northwest side of Quarters R (commanding officer's quarters), looking southeast - Naval Air Station Chase Field, Quarters R, Essex Street, .43 mile South-Southeast of intersection of Texas State Highway 202 & Independence Street, Beeville, Bee County, TX
4. South side of quarters (executive officer's quarters), looking north ...
4. South side of quarters (executive officer's quarters), looking north - Naval Air Station Chase Field, Quarters S, Essex Street, .45 mile South-Southeast of intersection of Texas State Highway 202 & Independence Street, Beeville, Bee County, TX
3. Southwest side of quarters (executive officer's quarters), looking northeast ...
3. Southwest side of quarters (executive officer's quarters), looking northeast - Naval Air Station Chase Field, Quarters S, Essex Street, .45 mile South-Southeast of intersection of Texas State Highway 202 & Independence Street, Beeville, Bee County, TX
The Hopelessness Theory of Depression: A Quarter Century in Review
Liu, Richard T.; Kleiman, Evan M.; Nestor, Bridget A.; Cheek, Shayna M.
2015-01-01
Since the formulation of the hopelessness theory of depression (Abramson, Metalsky, & Alloy, 1989) a quarter century ago, it has garnered considerable interest. The current paper presents a systematic review of this theory including its subsequent elaborations (Rose and Abramson’s [1992] developmental elaboration, Abela and Sarin’s [2002] weakest-link approach, Panzarella, Alloy, and Whitehouse’s [2006] expansion of the hopelessness theory, and the hopelessness theory of suicide [Abramson et al., 2000]), followed by recommendations for future study. Although empirical support was consistently found for several major components of the hopelessness theory, further work is required assessing this theory in relation to clinically significant phenomena. Among the most significant hindrances to advancement in this area is the frequent conceptual confusion between the hopelessness theory and the reformulated learned helplessness theory. PMID:26709338
The Hopelessness Theory of Depression: A Quarter Century in Review.
Liu, Richard T; Kleiman, Evan M; Nestor, Bridget A; Cheek, Shayna M
2015-12-01
Since the formulation of the hopelessness theory of depression (Abramson, Metalsky, & Alloy, 1989) a quarter century ago, it has garnered considerable interest. The current paper presents a systematic review of this theory including its subsequent elaborations (Rose and Abramson's [1992] developmental elaboration, Abela and Sarin's [2002] weakest-link approach, Panzarella, Alloy, and Whitehouse's [2006] expansion of the hopelessness theory, and the hopelessness theory of suicide [Abramson et al., 2000]), followed by recommendations for future study. Although empirical support was consistently found for several major components of the hopelessness theory, further work is required assessing this theory in relation to clinically significant phenomena. Among the most significant hindrances to advancement in this area is the frequent conceptual confusion between the hopelessness theory and the reformulated learned helplessness theory.
Improving health visitor emollient prescribing using a CQUIN-based approach.
Brooks, Christina; Khatau, Tejas
2015-12-01
Prescribing is an essential element of health visiting practice. This initiative used the payment framework of Commissioning for Quality and Innovation (CQUIN) to develop health visiting practice across a large health visiting workforce in the East Midlands. A focus on emollient prescribing practice was agreed and a guidance booklet regarding preferred emollient products was produced, based on the local formulary Each health visitor benefitted from receiving additional training and was given a guidance booklet to inform their practice. Targets were set for each quarter to demonstrate an improved prescribing adherence to the preferred product list.The targets were achieved for each quarter. Prescribing rates and confidence improved across the service. Therefore, it was demonstrated that specific guidance and ongoing support can improve prescribing practice within the health visiting service.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1986-01-01
The goal of this program is to develop polymer membranes useful in the preparation of hydrogen from coal-derived synthesis gas. During this quarter the first experiment were aimed at developing high performance composite membranes for the separation of hydrogen from nitrogen and carbon monoxide. Three polymers have been selected as materials for these membranes: polyetherimide cellulose acetate and ethylcellulose. This quarter the investigators worked on polyetherimide and cellulose acetate membranes. The overall structure of these membranes is shown schematically in Figure 1. As shown, a microporous support membrane is first coated with a high flux intermediate layer then with anmore » ultrathin permselective layer and finally, if necessary, a thin protective high flux layer. 1 fig., 4 tabs.« less
2010-01-01
Background Against the background of a decreasing number of general practitioners (GPs) in rural regions in Germany, the AGnES-concept (AGnES = GP-supporting, community-based, e-health-assisted, systemic intervention) supports the delegation of regular GP-home visits to qualified practice assistants. The concept was implemented and evaluated in different model projects in Germany. To explore the economic effects of this concept, the development of the number of home visits in an ambulatory healthcare centre was analysed and compared with the number of home visits in the surrounding county. Methods Information about GP-home visits was derived from reimbursement data of the ambulatory healthcare centre and a statutory health insurance. Information about home visits conducted by AGnES-practice assistants was collected from the project documentation over a time period of 12 consecutive quarter years, four quarter years before the beginning of the project and 8 quarter years while the project was implemented, considering background temporal trends on the population level in the study region. Results Within the ambulatory healthcare centre, the home visits by the GPs significantly decreased, especially the number of medically urgent home visits. However, the overall rate of home visits (conducted by the GPs and the AGnES-practice assistants together) did not change significantly after implementation of the AGnES-concept. In the surrounding county, the home visit rates of the GPs were continuous; the temporal patterns were approximately equal for both usual and urgent home visits. Conclusion The results of the analyses show that the support by AGnES-practice assistants led to a decrease of GP-home visits rather than an induction of additional home visits by the AGnES-practice assistants. The most extended effect is related to the medically urgent home visits rather than to the usual home visits. PMID:20529307
5. Interior of Quarters R (commanding officer's quarters), living room, ...
5. Interior of Quarters R (commanding officer's quarters), living room, looking northwest - Naval Air Station Chase Field, Quarters R, Essex Street, .43 mile South-Southeast of intersection of Texas State Highway 202 & Independence Street, Beeville, Bee County, TX
NASA Technical Reports Server (NTRS)
Ng, Gim Shek
1995-01-01
Cart supports rear-mounted air-cooled engine from Volkswagen or Porsche automobile. One person removes, repairs, tests, and reinstalls engine of car, van, or home-built airplane. Consists of framework of wood, steel, and aluminum components supported by four wheels. Engine lifted from vehicle by hydraulic jack and gently lowered onto waiting cart. Jack removed from under engine. Rear of vehicle raised just enough that engine can be rolled out from under it. Cart easily supports 200-lb engine. Also used to hold transmission. With removable sheet-metal top, cart used as portable seat.
NASA Technical Reports Server (NTRS)
Watson, Willie R.; Nark, Douglas M.; Nguyen, Duc T.; Tungkahotara, Siroj
2006-01-01
A finite element solution to the convected Helmholtz equation in a nonuniform flow is used to model the noise field within 3-D acoustically treated aero-engine nacelles. Options to select linear or cubic Hermite polynomial basis functions and isoparametric elements are included. However, the key feature of the method is a domain decomposition procedure that is based upon the inter-mixing of an iterative and a direct solve strategy for solving the discrete finite element equations. This procedure is optimized to take full advantage of sparsity and exploit the increased memory and parallel processing capability of modern computer architectures. Example computations are presented for the Langley Flow Impedance Test facility and a rectangular mapping of a full scale, generic aero-engine nacelle. The accuracy and parallel performance of this new solver are tested on both model problems using a supercomputer that contains hundreds of central processing units. Results show that the method gives extremely accurate attenuation predictions, achieves super-linear speedup over hundreds of CPUs, and solves upward of 25 million complex equations in a quarter of an hour.
Challenges in Construction Over Soft Soil - Case Studies in Malaysia
NASA Astrophysics Data System (ADS)
Mohamad, N. O.; Razali, C. E.; Hadi, A. A. A.; Som, P. P.; Eng, B. C.; Rusli, M. B.; Mohamad, F. R.
2016-07-01
Construction on soft ground area is a great challenge in the field of geotechnical engineering. Many engineering problems in the form of slope instability, bearing capacity failure or excessive settlement could occur either during or after the construction phase due to low shear strength and high compressibility of this soil. As main technical agencies responsible for implementation of development projects for Government of Malaysia, Public Works Department has vast experience in dealing with this problematic soil over the years. This paper discussed and elaborate on the engineering problems encountered in construction projects that have been carried out by PWD, namely Core Facilities Building of Polytechnic Kota Kinabalu in Sabah and Hospital Tengku Ampuan Rahimah Integration Quarters in Klang, Selangor. Instability of the ground during construction works had caused delay and cost overrun in completion of the project in Selangor, whereas occurrence of continuous post construction settlement had affected the integrity and serviceability of the building in Sabah. The causes of failure and proposed rehabilitation work for both projects also will be discussed in brief.
33 CFR 117.261 - Atlantic Intracoastal Waterway from St. Marys River to Key Largo.
Code of Federal Regulations, 2012 CFR
2012-07-01
... draw shall open on the quarter and three-quarter hour. (u) Flagler Memorial (SR A1A) bridge, mile 1020... (SR 700/80) bridge, mile 1024.7 at Palm Beach. The draw shall open on the quarter and three-quarter... open on the quarter and three-quarter-hour. (z-2) Linton Boulevard bridge, mile 1041.1, at Delray Beach...
33 CFR 117.261 - Atlantic Intracoastal Waterway from St. Marys River to Key Largo.
Code of Federal Regulations, 2011 CFR
2011-07-01
... draw shall open on the quarter and three-quarter hour. (u) Flagler Memorial (SR A1A) bridge, mile 1020... (SR 700/80) bridge, mile 1024.7 at Palm Beach. The draw shall open on the quarter and three-quarter... open on the quarter and three-quarter-hour. (z-2) Linton Boulevard bridge, mile 1041.1, at Delray Beach...
33 CFR 117.261 - Atlantic Intracoastal Waterway from St. Marys River to Key Largo.
Code of Federal Regulations, 2013 CFR
2013-07-01
... draw shall open on the quarter and three-quarter hour. (u) Flagler Memorial (SR A1A) bridge, mile 1020... (SR 700/80) bridge, mile 1024.7 at Palm Beach. The draw shall open on the quarter and three-quarter... open on the quarter and three-quarter-hour. (z-2) Linton Boulevard bridge, mile 1041.1, at Delray Beach...
Tenhagen, B A; Hille, A; Schmidt, A; Heuwieser, W
2005-02-01
It was the objective of this study to analyse shedding patterns and somatic cell counts in cows and quarters infected with Prototheca spp. and to evaluate two approaches to identify infected animals by somatic cell count (SCC) or by bacteriological analysis of pooled milk samples. Five lactating dairy cows, chronically infected with Prototheca spp. in at least one quarter were studied over 11 weeks to 13 months. Quarter milk samples and a pooled milk sample from 4 quarters were collected aseptically from all quarters of the cows on a weekly basis. Culture results of quarter milk and pooled samples were compared using cross tabulation. SCC of quarter milk samples and of pooled samples were related to the probability of detection in the infected quarters and cows, respectively. Shedding of Prototheca spp. was continuous in 2 of 8 quarters. In the other quarters negative samples were obtained sporadically or over a longer period (1 quarter). Overall, Prototheca spp. were isolated from 83.6% of quarter milk samples and 77.0% of pooled milk samples of infected quarters and cows. Somatic cell counts were higher in those samples from infected quarters that contained the algae than in negative samples (p < 0.0001). The same applied for composite samples from infected cows. Positive samples had higher SCC than negative samples. However, Prototheca spp. were also isolated from quarter milk and pooled samples with physiological SCC (i.e. < 10(5)/ml). Infected quarters that were dried off did not develop acute mastitis. However, drying off had no effect on the infection, i.e. samples collected at calving or 8 weeks after dry off still contained Prototheca spp. Results indicate that pre-selection of cows to be sampled for Prototheca spp. by SCC and the use of composite samples are probably inadequate in attempts to eradicate the disease. However, due to intermittent shedding of the algae in some cows, single herd sampling using quarter milk samples probably also fails to detect all infected cases. Therefore, continuous monitoring of problem cows with clinical mastitis or increased SCC in herds during eradication programs is recommended.
Supporting research and technology for automotive Stirling engine development
NASA Technical Reports Server (NTRS)
Tomazic, W. A.
1980-01-01
The technology advancement topics described are a part of the supporting research and technology (SRT) program conducted to support the major Stirling engine development program. This support focuses on developing alternatives or backups to the engine development in critical areas. These areas are materials, seals control, combustors and system analysis. Specific objectives and planned milestone schedules for future activities as now envisioned are described. These planned SRT activities are related to the timeline of the engine development program that they must support.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Roberts, George W
1998-12-11
A modified analytical system was assembled and calibrated, in preparation for a second run with cesium (Cs)-promoted "zinc chromite" catalyst. A new column for the on-line gas chromatography (GC) was purchased for the analysis of various light olefin and paraffin isomers. A run was carried out in the continuous stirred autoclave using the Cs-promoted catalyst. Decahydronaphfialene was used as the slurry liquid. Reaction conditions were 375°C, 2000 psig total pressure, 0.5 H₂/CO ratio, and 5000 sL/Kg (cat.)-hr. Analysis of the data from this run is in progress. A manuscript on the thermal stability of potential slurry liquids was submitted tomore » 'Industrial and Engineering Chemistry Research,' and a paper was presented at the 1997 Spring National Meeting of the American Institute of Chemical Engineers, Houston, Texas.« less
Barriers to the clinical translation of orthopedic tissue engineering.
Evans, Christopher H
2011-12-01
Tissue engineering and regenerative medicine have been the subject of increasingly intensive research for over 20 years, and there is concern in some quarters over the lack of clinically useful products despite the large sums of money invested. This review provides one perspective on orthopedic applications from a biologist working in academia. It is suggested that the delay in clinical application is not atypical of new, biologically based technologies. Some barriers to progress are acknowledged and discussed, but it is also noted that preclinical studies have identified several promising types of cells, scaffolds, and morphogenetic signals, which, although not optimal, are worth advancing toward human trials to establish a bridgehead in the clinic. Although this transitional technology will be replaced by more sophisticated, subsequent systems, it will perform valuable pioneering functions and facilitate the clinical development of the field. Some strategies for achieving this are suggested. © Mary Ann Liebert, Inc.
Cigarette continuity programs and social support for smoking.
Sumner, W; Dunaway, M; Dillman, D G
1998-01-01
To describe smokers' participation in cigarette continuity programs and the prevalence and structure of cooperative teams of smokers. Cross-sectional survey of smoking histories and continuity-program participation by individuals and their family members in a convenience sample of 176 current smokers at the University of Kentucky Chandler Medical Center, Lexington. Fisher exact test or chi2 tests were used to compare proportions. One of 3 smokers collected coupons for a continuity program. Three quarters of the collectors redeemed their own coupons, and one quarter gave coupons to another collector. Coupon collectors reported an average team size of more than 2 members. One fifth of collectors were teammates with another generation of family members, and one quarter of collectors aged 24 to 35 years were teammates with their children. Smokers were often aware of their relatives' coupon-collecting habits. Continuity programs have been a popular means of reinforcing smoking, especially within families and groups of friends. Continuity programs are novel in encouraging smoking and brand loyalty between generations. Continuity-program participants need to be aware of the risk of promoting smoking initiation by their children. Health advocates could use similar strategies to promote smoking cessation and prevention within families and other social groups.
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1996-05-17
The objectives of this report are to provide the necessary administrative support to assure that the scientific and educational goals of the project are obtained and to assure that all Department of Energy reporting requirements and requests are fulfilled. The grant reporting is divided into three aspects: Collaborative Cluster projects, Initiation projects and Education projects. A cluster project is one or more closely related collaborative, multidisciplinary research projects in which a group of investigators employs a synergistic approach to the solution of problems in the same general area of research. The accomplishments this quarter of eleven cluster projects are presented.more » An initial project typically involves a single investigator. The purpose of the project is to undertake pilot work, lasting no more than one year, which will lead to the successful submission of an externally-funded proposal or the development of a collaborative cluster project. The accomplishments this quarter of eleven initiation projects are presented. The education projects are designed to develop courses with emphasis on environmental studies and/or to train students in areas of environmental research.« less
14 CFR 25.361 - Engine torque.
Code of Federal Regulations, 2010 CFR
2010-01-01
... engine mount and its supporting structure must be designed for the effects of— (1) A limit engine torque.... (b) For turbine engine installations, the engine mounts and supporting structure must be designed to... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Engine torque. 25.361 Section 25.361...
14 CFR 25.361 - Engine torque.
Code of Federal Regulations, 2012 CFR
2012-01-01
... engine mount and its supporting structure must be designed for the effects of— (1) A limit engine torque.... (b) For turbine engine installations, the engine mounts and supporting structure must be designed to... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Engine torque. 25.361 Section 25.361...
14 CFR 25.361 - Engine torque.
Code of Federal Regulations, 2014 CFR
2014-01-01
... engine mount and its supporting structure must be designed for the effects of— (1) A limit engine torque.... (b) For turbine engine installations, the engine mounts and supporting structure must be designed to... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Engine torque. 25.361 Section 25.361...
14 CFR 25.361 - Engine torque.
Code of Federal Regulations, 2011 CFR
2011-01-01
... engine mount and its supporting structure must be designed for the effects of— (1) A limit engine torque.... (b) For turbine engine installations, the engine mounts and supporting structure must be designed to... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Engine torque. 25.361 Section 25.361...
14 CFR 25.361 - Engine torque.
Code of Federal Regulations, 2013 CFR
2013-01-01
... engine mount and its supporting structure must be designed for the effects of— (1) A limit engine torque.... (b) For turbine engine installations, the engine mounts and supporting structure must be designed to... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Engine torque. 25.361 Section 25.361...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jubin, R.T.
The Chemical and Energy Research Section conducts basic and applied research and development in chemical engineering, applied chemistry, and bioprocessing, with an emphasis on energy-driven technologies and advanced chemical separations for nuclear and waste applications. The report describes the various tasks performed within six major areas of research: Hot Cell Operations, Process Chemistry and thermodynamics, Separations and Materials Synthesis, Solution Thermodynamics, biotechnology Research, and Molecular Studies. The name of a technical contact is included with each task described, and readers are encouraged to contact these individuals if they need additional information.
Microtube strip heat exchanger
NASA Astrophysics Data System (ADS)
Doty, F. D.
1991-10-01
This progress report is for the September-October 1991 quarter. We have demonstrated feasibility of higher specific conductance by a factor of five than any other work in high-temperature gas-to-gas exchangers. These laminar-flow, microtube exchangers exhibit extremely low pressure drop compared to alternative compact designs under similar conditions because of their much shorter flow length and larger total flow area for lower flow velocities. The design appears to be amenable to mass production techniques, but considerable process development remains. The reduction in materials usage and the improved heat exchanger performance promise to be of enormous significance in advanced engine designs and in cryogenics.
New Soyuz Crew Launches to the International Space Station
2017-09-12
Expedition 53-54 Soyuz Commander Alexander Misurkin of Roscosmos and flight engineers Mark Vande Hei and Joe Acaba of NASA launched on the Russian Soyuz MS-06 spacecraft Sept. 13 (Kazakhstan time) from the Baikonur Cosmodrome in Kazakhstan. The trio began a six-hour journey to the International Space Station and the start of a five-and-a-half month mission on the outpost. The footage contains the crew’s prelaunch activities including their departure from their crew quarters, suit-up in the Cosmodrome’s Integration Facility, walkout to the crew bus and arrival at the launch pad to board the spacecraft
Twenty-five years of maximum-entropy principle
NASA Astrophysics Data System (ADS)
Kapur, J. N.
1983-04-01
The strengths and weaknesses of the maximum entropy principle (MEP) are examined and some challenging problems that remain outstanding at the end of the first quarter century of the principle are discussed. The original formalism of the MEP is presented and its relationship to statistical mechanics is set forth. The use of MEP for characterizing statistical distributions, in statistical inference, nonlinear spectral analysis, transportation models, population density models, models for brand-switching in marketing and vote-switching in elections is discussed. Its application to finance, insurance, image reconstruction, pattern recognition, operations research and engineering, biology and medicine, and nonparametric density estimation is considered.
Connecticut Biodiesel Power Generation Project
DOE Office of Scientific and Technical Information (OSTI.GOV)
Grannis, Lee; York, Carla R.
Sabre will continue support of the emissions equipment and VARS issues to ensure all are resolved and the system is functioning as expected. The remote data collection to become more automated. Final project reports for data collection and system performance to be generated. Sabre continued to support the emissions equipment and VARS issues to ensure all are resolved and the system is functioning as expected. The remote data collection became more automated. Final project reports for data collection and system performance were generated and are part of this final report. Some Systems Sensors were replaced due to a lightning strike.more » Sample data charts are shown at the end of the report. During the project, Sabre Engineering provided support to the project team with regarding to troubleshooting technical issues and system integration with the local power utility company. The resulting lessons learned through Sabre’s participation in the project have been valuable to the integrity of the data collected as well as in providing BioPur Light & Power valuable insights into future operations and planning for possible expansion. The system monitoring and data collection system has been operating as designed and continues to provide relevant information to the system operators. The information routinely gathered automatically by the system also contributes to the REN and REC validations which are required to secure credit for these items. During the quarter, the remaining work on the operations and safety manual were completed and released for publication after screen shots were verified. The goal of this effort to provide an accurate set of precautions and procedures for the technology system that can be replicated to other similar system.« less
Inertial Confinement Fusion Annual Report 1997
DOE Office of Scientific and Technical Information (OSTI.GOV)
Correll, D
The ICF Annual Report provides documentation of the achievements of the LLNL ICF Program during the fiscal year by the use of two formats: (1) an Overview that is a narrative summary of important results for the fiscal year and (2) a compilation of the articles that previously appeared in the ICF Quarterly Report that year. Both the Overview and Quarterly Report are also on the Web at http://lasers.llnl.gov/lasers/pubs/icfq.html. Beginning in Fiscal Year 1997, the fourth quarter issue of the ICF Quarterly was no longer printed as a separate document but rather included in the ICF Annual. This change providedmore » a more efficient process of documenting our accomplishments with-out unnecessary duplication of printing. In addition we introduced a new document, the ICF Program Monthly Highlights. Starting with the September 1997 issue and each month following, the Monthly Highlights will provide a brief description of noteworthy activities of interest to our DOE sponsors and our stakeholders. The underlying theme for LLNL's ICF Program research continues to be defined within DOE's Defense Programs missions and goals. In support of these missions and goals, the ICF Program advances research and technology development in major interrelated areas that include fusion target theory and design, target fabrication, target experiments, and laser and optical science and technology. While in pursuit of its goal of demonstrating thermonuclear fusion ignition and energy gain in the laboratory, the ICF Program provides research and development opportunities in fundamental high-energy-density physics and supports the necessary research base for the possible long-term application of inertial fusion energy for civilian power production. ICF technologies continue to have spin-off applications for additional government and industrial use. In addition to these topics, the ICF Annual Report covers non-ICF funded, but related, laser research and development and associated applications. We also provide a short summary of the quarterly activities within Nova laser operations, Beamlet laser operations, and National Ignition Facility laser design. LLNL's ICF Program falls within DOE's national ICF program, which includes the Nova and Beamlet (LLNL), OMEGA (University of Rochester Laboratory for Laser Energetics), Nike (Naval Research Laboratory), and Trident (Los Alamos National Laboratory) laser facilities. The Particle Beam Fusion Accelerator (Z) and Saturn pulsed-power facilities are at Sandia National Laboratories. General Atomics, Inc., develops and provides many of the targets for the above experimental facilities. Many of the ICF Annual Report articles are co-authored with our colleagues from these other ICF institutions.« less
Method of vibration isolating an aircraft engine
NASA Technical Reports Server (NTRS)
Bender, Stanley I. (Inventor); Butler, Lawrence (Inventor); Dawes, Peter W. (Inventor)
1991-01-01
A method for coupling an engine to a support frame for mounting to a fuselage of an aircraft using a three point vibration isolating mounting system in which the load reactive forces at each mounting point are statically and dynamically determined. A first vibration isolating mount pivotably couples a first end of an elongated support beam to a stator portion of an engine with the pivoting action of the vibration mount being oriented such that it is pivotable about a line parallel to a center line of the engine. An aft end of the supporting frame is coupled to the engine through an additional pair of vibration isolating mounts with the mounts being oriented such that they are pivotable about a circumference of the engine. The aft mounts are symmetrically spaced to each side of the supporting frame by 45 degrees. The relative orientation between the front mount and the pair of rear mounts is such that only the rear mounts provide load reactive forces parallel to the engine center line, in support of the engine to the aircraft against thrust forces. The forward mount is oriented so as to provide only radial forces to the engine and some lifting forces to maintain the engine in position adjacent a fuselage. Since each mount is connected to provide specific forces to support the engine, forces required of each mount are statically and dynamically determinable.
Tools to Support Human Factors and Systems Engineering Interactions During Early Analysis
NASA Technical Reports Server (NTRS)
Thronesbery, Carroll; Malin, Jane T.; Holden, Kritina; Smith, Danielle Paige
2005-01-01
We describe an approach and existing software tool support for effective interactions between human factors engineers and systems engineers in early analysis activities during system acquisition. We examine the tasks performed during this stage, emphasizing those tasks where system engineers and human engineers interact. The Concept of Operations (ConOps) document is an important product during this phase, and particular attention is paid to its influences on subsequent acquisition activities. Understanding this influence helps ConOps authors describe a complete system concept that guides subsequent acquisition activities. We identify commonly used system engineering and human engineering tools and examine how they can support the specific tasks associated with system definition. We identify possible gaps in the support of these tasks, the largest of which appears to be creating the ConOps document itself. Finally, we outline the goals of our future empirical investigations of tools to support system concept definition.
Tools to Support Human Factors and Systems Engineering Interactions During Early Analysis
NASA Technical Reports Server (NTRS)
Thronesbery, Carroll; Malin, Jane T.; Holden, Kritina; Smith, Danielle Paige
2006-01-01
We describe an approach and existing software tool support for effective interactions between human factors engineers and systems engineers in early analysis activities during system acquisition. We examine the tasks performed during this stage, emphasizing those tasks where system engineers and human engineers interact. The Concept of Operations (ConOps) document is an important product during this phase, and particular attention is paid to its influences on subsequent acquisition activities. Understanding this influence helps ConOps authors describe a complete system concept that guides subsequent acquisition activities. We identify commonly used system engineering and human engineering tools and examine how they can support the specific tasks associated with system definition. We identify possible gaps in the support of these tasks, the largest of which appears to be creating the ConOps document itself. Finally, we outline the goals of our future empirical investigations of tools to support system concept definition.
NASA Technical Reports Server (NTRS)
Pinelli, Thomas E.; Kennedy, John M.; Barclay, Rebecca O.
1995-01-01
Results are presented of a survey of aerospace engineering and science students conducted in India, Japan, Russia, the United Kingdom, and the United States. The similarities and differences among aerospace engineering and science students from the five countries are examined in the context of two general aspects of educational experience. First, the extent to which students differ regarding the factors that led to the choice of a career in aerospace, their current levels of satisfaction with that choice, and career-related goals and objectives is considered. Second, the importance of certain communications/information-use skills for professional use is examined, as well as the frequency of use and importance of specific information sources and products to meet students' educational needs. Overall, the students who participated in this research remain relatively happy with the choice of a career in aerospace engineering, despite pessimism in some quarters about the future of the industry. Regardless of national identity, aerospace engineering and science students appear to share a similar vision of the profession in terms of their career goals and aspirations. The data also indicate that aerospace engineering and science students are well aware of the importance of communications/information-use skills to professional success and that competency in these skills will help them to be productive members of their profession. Collectively, all of the students appear to use and value similar information sources and products, although some differences appear by country.
12 CFR 1777.10 - Developments prompting supervisory response.
Code of Federal Regulations, 2010 CFR
2010-01-01
... less than the national HPI four quarters previously, or for any Census Division or Divisions in which... more than five percent less than the HPI for that Division or Divisions four quarters previously; (b...-half of its average quarterly net income for any four-quarter period during the prior eight quarters...
18 CFR 35.10b - Electric Quarterly Reports.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Electric Quarterly... Application § 35.10b Electric Quarterly Reports. Each public utility shall file an updated Electric Quarterly..., file by January 31. Electric Quarterly Reports must be prepared in conformance with the Commission's...
18 CFR 35.10b - Electric Quarterly Reports.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Electric Quarterly... Application § 35.10b Electric Quarterly Reports. Each public utility shall file an updated Electric Quarterly..., file by January 31. Electric Quarterly Reports must be prepared in conformance with the Commission's...
18 CFR 35.10b - Electric Quarterly Reports.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Electric Quarterly... Application § 35.10b Electric Quarterly Reports. Each public utility shall file an updated Electric Quarterly..., file by January 31. Electric Quarterly Reports must be prepared in conformance with the Commission's...
NASA Astrophysics Data System (ADS)
Afiq, Mohd; Azuhairi, Mohd; Jazair, Wira
2010-06-01
In Malaysia, more than 200-tone of cooking oil are used by domestic users everyday. After frying process, about a quarter of these cooking oil was remained and drained into sewage system. This will pollutes waterways and affects the ecosystem. The use of waste cooking oil (WCO) for producing bio-diesel was considered in economical factor which current production cost of bio-diesel production is higher in Malaysia due to higher price of palm oil. Thus, the aim of this study is to investigate the most suitable source of WCO to become a main source of bio-diesel for bio-diesel production in this country. To perform this research, three type of WCO were obtained from house's kitchen, cafeteria and mamak's restaurant. In this study, prospect of these bio-diesel source was evaluated based on its combustion performance and exhaust emissions operated in diesel engine in the form of waste cooking oil methyl ester (WCOME) and have been compared with pure diesel fuel. A 0.6 liter, single-cylinder, air-cooled direct injection diesel engine was used to perform this experiment. Experiment was done at variable engine loads and constant engine speed. As the result, among three stated WCOMEs, the one collected from house's kitchen gives the best performance in term of brake specific fuel consumption (bsfc) and brake power (BP) with lowest soot emission.
Oil Bypass Filter Technology Evaluation, Fourth Quarterly Report, July--September 2003
DOE Office of Scientific and Technical Information (OSTI.GOV)
James E. Francfort; Larry Zirker
2003-11-01
This fourth Oil Bypass Filter Technology Evaluation report details the ongoing fleet evaluation of an oil bypass filter technology by the Idaho National Engineering and Environmental Laboratory (INEEL) for the U.S. Department of Energy’s FreedomCAR & Vehicle Technologies Program. Eight four-cycle diesel-engine buses used to transport INEEL employees on various routes have been equipped with oil bypass filter systems from the puraDYN Corporation. The bypass filters are reported to have engine oil filtering capability of <1 micron and a built-in additive package to facilitate extended oil-drain intervals. To date, the eight buses have accumulated 259,398 test miles. This represents anmore » avoidance of 21 oil changes, which equates to 740 quarts (185 gallons) of oil not used or disposed of. To validate the extended oil-drain intervals, an oil-analysis regime evaluates the fitness of the oil for continued service by monitoring the presence of necessary additives, undesirable contaminants, and engine-wear metals. For bus 73450, higher values of iron have been reported, but the wear rate ratio (parts per million of iron per thousand miles driven) has remained consistent. In anticipation of also evaluating oil bypass systems on six Chevrolet Tahoe sport utility vehicles, the oil is being sampled on each of the Tahoes to develop a characterization history or baseline for each engine.« less
Rocketdyne Development of RBCC Engine for Low Cost Access to Space
NASA Technical Reports Server (NTRS)
Ortwerth, P.; Ratekin, G.; Goldman, A.; Emanuel, M.; Ketchum, A.; Horn, M.
1997-01-01
Rocketdyne is pursuing the conceptual design and development of a Rocket Based Combined Cycle (RBCC) engine for booster and SSTO, advanced reusable space transportation ARTT systems under contract with NASA Marshall Space Flight Center. The Rocketdyne concept is fixed geometry integrated Rocket, Ram Scramjet which is Hydrogen fueled and uses Hydrogen regenerative cooling. Vision vehicle integration studies have determined that scramjet operation to Mach 12 has high payoff for low cost reusable space transportation. Rocketdyne is internally developing versions of the concept for other applications in high speed aircraft and missiles with Hydrocarbon fuel systems. Subscale engine ground testing is underway for all modes of operation from takeoff to Mach 8. High altitude Rocket only mode tests will be completed as part of the ground test program to validate high expansion ratio performance. A unique feature of the ground test series is the inclusion of dynamic trajectory simulation with real time Mach number, altitude, engine throttling, and RBCC mode changes in a specially modified freejet test facility at GASL. Preliminary cold flow Air Augmented Rocket mode test results and Short Combustor tests have met program goals and have been used to integrate all modes of operation in a single combustor design with a fixed geometry inlet for design confirmation tests. A water cooled subscale engine is being fabricated and installed for test beginning the last quarter of 1997.
Science and Technology Community in Crisis
2002-05-01
centralized, highly bureaucratic, support system that considers itself an end, a point noted in the management literature by Peter Drucker :48 “What...Review Quarterly, Spring 2000. 48 Drucker , Peter F., Management : Tasks, Responsibilities, Practices, Apr 1993. 43 regionalization of personnel...technical areas as information technology, biotechnology, nanotechnology, etc. Peter Drucker , the well-known management expert once commented: “In
The Telecommunications and Data Acquisition Report
NASA Technical Reports Server (NTRS)
Yuen, Joseph H. (Editor)
1994-01-01
This quarterly publication provides archival reports on developments in programs in space communications, radio navigation, radio science, and ground-based radio and radar astronomy. It reports on activities of the Deep Space Network (DSN) in planning, supporting research and technology, implementation, and operations. Also included are standardization activities at the Jet Propulsion Laboratory for space data and information systems.
Standing Up for Good Teaching: The Business Communication Academic as Activist
ERIC Educational Resources Information Center
Rentz, Kathy
2010-01-01
In this article, the author considers a topic that is not talked about much: the working conditions of business communication teachers. In 1990, a special issue of "Business Communication Quarterly" focused on stress in this field, and it identified unstable academic appointments and the lack of departmental support as two main causes.…
Stochastic Price Models and Optimal Tree Cutting: Results for Loblolly Pine
Robert G. Haight; Thomas P. Holmes
1991-01-01
An empirical investigation of stumpage price models and optimal harvest policies is conducted for loblolly pine plantations in the southeastern United States. The stationarity of monthly and quarterly series of sawtimber prices is analyzed using a unit root test. The statistical evidence supports stationary autoregressive models for the monthly series and for the...
Chechen Female Suicide Terrorism
2017-06-01
acts perpetrated in Chechnya since 1995 consisted of hostage taking and suicide bombings carried out by the Martyrs Brigade (Riyadus Salikhin)2 while...Mia M. Bloom, “Palestinian Suicide Bombing : Public Support, Market Share, and Outbidding,” Political Science Quarterly 119, no. 1 (2004): 61. 30...38 Mohammed M. Hafez, Manufacturing Human Bombs : The Making of Palestinian Suicide Bombers (Washington, DC
Lilly's Purple Plastic Purse. ArtsEdge Curricula, Lessons and Activities.
ERIC Educational Resources Information Center
Bauernschub, Mary Beth
In the children's book, "Lilly's Purple Plastic Purse," Lilly gets into trouble for interrupting class to show off her three shiny quarters and her purple plastic purse, which makes music when it is opened. This curriculum unit intended for students in grades 2 and 3 supports the book (and Kennedy Center Production). The five lessons in…
ERIC Educational Resources Information Center
Theilheimer, Ish, Ed.; Eisner, Kathy, Ed.
1996-01-01
This issue of the Canadian quarterly "Transition", in French and English language versions, examines issues related to the demographic shift Canada will experience as the baby boom generation enters "old age." Major articles in this issue are: (1) "Of Mutual Benefit," which outlines some of the challenges Canada faces…
Urban Planning Aspects of Museum Quarters as an Architectural Medium for Creative Cities
NASA Astrophysics Data System (ADS)
Kochergina, Ekaterina
2017-10-01
Since the second half of the 20th century, urban environment has experienced significant transformation. Splash of interactivity, bottom-up initiations with development of creative sector of city economy and participatory planning, irretrievably changed the attitude to the urban medium. One of the most intensively growing field - creative industry - provided cities with numerous cultural clusters, which boosted urban economic development and social cohesion. Supported in many cases by gentrification and revitalization, these processes brought renovation of brownfield and more comprehensive approaches to urban design. Understanding of the economic benefits made city managers start an active promotion of creative clusters and their intensive integration into urban life, involving the main museums and cultural institutions. Thus, a new type of cultural clusters - Museum Quarter - appeared. Holding the position of cultural flagman in the historical heart of the city, Museum Quarters (MQs) pretend to take on an important role both in urban planning structure and in social life. Furthermore, such role usually has strong influence on the surrounding districts, in a positive or negative way. Although basic principles are still applied for all types of cultural districts, the phenomena of “Museum Quarters” due to the complexity of planning, operating and maintenance issues, stepped far above basic cultural clusters, requiring substantially new attitude to the planning of such urban entities. Five clusters were chosen for this study: MQs in Vienna, Berlin, Amsterdam, Copenhagen and the currently developing project in Budapest. The main purpose of this paper is to elaborate the principles for the practical implementation of Museum Quarters by the definition and classification of their specific urban planning aspects. The complexity of target object - Museum Quarter - and its multi-level relationships with the whole city, require from the research interdisciplinary approach and methodology of systemic-structural analysis. The typology of different MQs - identifying specific and common features - is based on studies of urban grids and architectural characters. The critical observation and comparison of the sociopolitical background and the traditional and modern understanding of museum environment helped to define some crucial misconceptions in interpretation, such as the widespread attitude to the Museum Quarter as a museum building, not as a part of urban medium, causing documented obstacles to development. Consideration of drawbacks and advantages, as the results of this study, showed potential of Museum Quarters as new models of urban environment for smart-governed, economically and socially sustainable contemporary city life.
Idaho National Laboratory Quarterly Occurrence Analysis 4th Quarter FY 2016
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mitchell, Lisbeth Ann
This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System, as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 84 reportable events (29 from the 4th quarter fiscal year 2016 and 55 from the prior three reporting quarters), as well as 39 other issue reports (including events found to be not reportable and Significant Category A and Bmore » conditions) identified at INL during the past 12 months (two from this quarter and 37 from the prior three quarters).« less
Scott, Anna; Hardefeldt, Jannah M.; Hall, Karina C.
2014-01-01
Anemonefishes and their host sea anemones form an iconic symbiotic association in reef environments, and are highly sought after in the marine aquarium trade. This study examines asexual propagation as a method for culturing a geographically widespread and commonly traded species of host sea anemone, Entacmaea quadricolor. Two experiments were done: the first to establish whether size or colour morph influenced survival after cutting into halves or quarters; and the second to see whether feeding was needed to maximise survival and growth after cutting. Survival rates were high in both experiments, with 89.3 and 93.8% of the anemones cut in half, and 62.5 and 80.4% cut in quarters surviving in experiments 1 and 2, respectively. Anemones that were cut in half were larger in size, and healed and grew quicker than those cut in quarters. However, even though survival was lower when the individuals were cut in quarters, this treatment produced the greatest number of anemones. Feeding increased oral disc diameter growth and reduced wet weight loss, but did not significantly influence pedal disc diameter. Given that the anemones took up to 56 d to form an off-centre mouth, it is highly likely that feeding may have produced greater effect if the experiment was run for longer. This low technology method of propagation could be used to produce individuals throughout the year and the anemones could then be used to supply the aquarium trade or restock depleted habitats, thus supporting biodiversity conservation in coral reef areas. PMID:25314131
Scott, Anna; Hardefeldt, Jannah M; Hall, Karina C
2014-01-01
Anemonefishes and their host sea anemones form an iconic symbiotic association in reef environments, and are highly sought after in the marine aquarium trade. This study examines asexual propagation as a method for culturing a geographically widespread and commonly traded species of host sea anemone, Entacmaea quadricolor. Two experiments were done: the first to establish whether size or colour morph influenced survival after cutting into halves or quarters; and the second to see whether feeding was needed to maximise survival and growth after cutting. Survival rates were high in both experiments, with 89.3 and 93.8% of the anemones cut in half, and 62.5 and 80.4% cut in quarters surviving in experiments 1 and 2, respectively. Anemones that were cut in half were larger in size, and healed and grew quicker than those cut in quarters. However, even though survival was lower when the individuals were cut in quarters, this treatment produced the greatest number of anemones. Feeding increased oral disc diameter growth and reduced wet weight loss, but did not significantly influence pedal disc diameter. Given that the anemones took up to 56 d to form an off-centre mouth, it is highly likely that feeding may have produced greater effect if the experiment was run for longer. This low technology method of propagation could be used to produce individuals throughout the year and the anemones could then be used to supply the aquarium trade or restock depleted habitats, thus supporting biodiversity conservation in coral reef areas.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Trimble, T.; North, D.R.; Green, K.A.H.
1994-05-27
The regulatory impact analysis and support document provides additional information in support of the Final Rulemaking (FRM). This FRM will regulate all new nonroad compression-ignition engines greater than or equal to 37 kilowatts (50 hp), except engines which propel or are used on marine vessels, aircraft engines, engines which propel locomotives, and engines regulated by the Mining, Safety, and Health Administration. The regulated engines are hereafter referred to as nonroad large CI engines. The goal of this regulation is to substantially reduce NOx emission and smoke from nonroad large CI engines beginning in the 1996 model year.
Introducing the Institute of Physics in Engineering and Medicine (IPEM)
NASA Astrophysics Data System (ADS)
Keevil, Stephen F.
2014-04-01
Physics in Medicine and Biology is one of three journals owned by the UK based Institute of Physics and Engineering in Medicine (IPEM), along with Physiological Measurement and Medical Engineering and Physics. IPEM is a charity and journal revenues are a vital part of our income stream. By subscribing to our journals, you are helping to support the work of IPEM, so you may be interested to learn more about who we are and what we do. IPEM aims to advance physics and engineering applied to medicine and biology for the public good. Our membership comprises over 4000 physicists, engineers and technologists working in healthcare, academia and industry. Most of our work depends on these members generously volunteering their expert knowledge and extensive experience to work in the following areas. Promoting research and innovation Along with the scientific journals mentioned above, we also regularly produce scientific reports. There are currently 40 IPEM reports in print, as well as reference books such as The Gamma Camera—A Comprehensive Guide and the recently published Physicists and Physicians: A History of Medical Physics from the Renaissance to Röntgen. Publishing is just one way in which we encourage R&D and increase the uptake of new knowledge and innovations. We also support scientific conferences, such as the International Conference on Medical Physics 50th anniversary meeting, which we hosted in 2013 on behalf of the International Organization for Medical Physics (IOMP). This four-day event explored the contribution that physics and engineering can make to healthcare and showcased the latest developments via 312 international speakers, 212 posters and an exhibition. Our awards, travel bursaries and grants enable us to facilitate, recognize and reward the work of our members. In 2012 we awarded almost #95 000 (around 155 000) this way. Championing the sector IPEM provides a unified voice with which to represent the views of our membership and raise the profile of the medical physics and bioengineering sectors. We seek to influence science and healthcare policy-makers through responses to consultations, high-level committee representation and policy statements. By providing expert spokespeople, we help to ensure accurate media coverage of IPEM-related issues. For example, in 2012 we contributed to the development of new European Commission regulations on medical implants and diagnostic devices. We also worked with the Science Media Centre to provide a press briefing on the subject that led to informed coverage by national media outlets, including BBC Radio 4's Today programme, The Times and the British Medical Journal. Enhancing science and technology in healthcare IPEM works to uphold the quality, safety and effectiveness of science and technology in healthcare. We do this by influencing healthcare policy and practice, helping to set international standards and guidelines and conducting surveys and audits. Our special interest groups (SIGs) provide specialized expertise on a range of topics (see table 1). For example, the Radiotherapy SIG was recently consulted on the distribution of the UK Department of Health's #23m Radiotherapy Innovation Fund. Table 1. IPEM special interest groups (SIGs). Clinical engineering Diagnostic radiology Informatics and computing Nuclear medicine Radiotherapy Magnetic resonance Radiation protection Physiological measurement Rehabilitation and biomechanics Ultrasound and non-ionizing radiation High-quality education and training We aim to maintain high standards of professional development for healthcare scientists, engineers and technicians. In the UK, we are an important source of accreditation for training centres. We also offer training and other support for trainees, such as the trainee network which enables early career healthcare scientists and engineers to collaborate and support each other. Through IPEM, members can seek professional registration on the Science Council and Engineering Council schemes, or on the Voluntary Register of Clinical Technologists. We also provide opportunities for continuing professional development in the form of one-day meetings. In 2012, we held 17 such events on subjects such as optical radiation, IMRT verification and bespoke software in medical physics and clinical engineering. Supporting the workforce Earlier this year, we created our Workforce Intelligence Unit, which is providing authoritative data on the UK workforce in our sectors to inform stakeholders and influence decision-makers. This is part of our wider work to ensure that the right medical physics and biomedical engineering workforce is in place and provided with the support it needs. We keep our members up to date with the latest developments via our website, social media, a monthly newsletter and the quarterly magazine, Scope. Engaging with the public An important part of our charitable objectives is to inform and educate the public. The vast majority of our outreach activity is delivered by volunteer members, often in their own time at events such as careers fairs, classroom demonstrations and hospital open days. Most members find the experience hugely rewarding and a great way to improve their communication skills. Around 120 members were involved in outreach events in 2012. International work IPEM works closely with the international medical physics and bioengineering communities and our International Advisory Group has links to Europe, India and the rest of the world. We represent the UK in the IOMP and the European Federation of Organizations for Medical Physics (EFOMP). IPEM is also a member of the European Alliance for Medical and Biological Engineering and Science (EAMBES) and the International Federation for Medical and Biological Engineering (IFMBE). Why join us? Membership of IPEM is open to healthcare physicists, engineers or technologists working in hospitals, academia or industry anywhere in the world. If you are based outside the UK, our international membership is designed to complement your existing national professional body membership and offers substantial discounts on our journals (including Physics in Medicine and Biology ) and publications, along with international networking opportunities and other member benefits. You can find out more about us at www.ipem.ac.uk or follow us on Twitter @ipemnews.
Azzam, R M A
2017-08-10
A quarter-wave layer (QWL) of high refractive index, which is deposited on a transparent prism of low refractive index, can be designed to split an incident p-polarized light beam at the Brewster angle (BA) of the air-substrate interface into p-polarized reflected and transmitted beams of equal intensity (50% each) that travel in orthogonal directions. For reflection of p-polarized light at the BA, the supported QWL functions as a free-standing (unsupported) pellicle. An exemplary design is presented that uses Si x Ge 1-x QWL deposited on an IRTRAN1 prism for applications (such as Michelson and Mach-Zehnder interferometry) with a variable compositional fraction x in the 2-6 μm mid-IR spectral range.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Yarrington, R M; Feins, I R; Hwang, H S
1979-01-01
The work done under this contract in the last quarter of 1978 was concerned with Phase I, which involved preliminary catalyst and process evaluation. The processes under study are hydrogen assisted steam reforming (HASR), catalytic partial oxidation (CPO), and autothermal steam reforming (ATR). Existing Engelhard test units were modified to carry out preliminary runs using the first two processes. Technical analysis to support work in this area consisted of heat and material balances constrained by equilibrium considerations. In a third task, the steam reforming of methanol to produce hydrogen was studied over two commercial low-temperature shift catalysts. Aging runs indicatedmore » good initial performance on both catalysts, but methanol conversion started to decline after a few hundred hours on stream.« less
Academic Leadership Development: A Case Study.
Berman, Audrey
2015-01-01
A dean at a private school of nursing implemented a leadership development program for early- to mid-career nursing faculty consisting of one 4-hour evening session per academic quarter for 7 quarters. Eight faculty members who had expressed interest in assuming a leadership role or been recommended by their supervisors as having strong leadership potential were invited to join. Program topics included leadership pathways, legal issues, budgeting and governance, diversity, the political arena, human resources, and student issues. Interviews with participants revealed 6 themes: the support a peer cohort provided, a desire for real-life application, a lack of previous exposure to related content or experiences, new perceptions of themselves as academic nurse leaders, the value of the program as preparation for academic nursing leadership roles, and broad program applicability. Copyright © 2015 Elsevier Inc. All rights reserved.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-23
... Quarterly Summary of State and Local Government Tax Revenue, using the F-71 (Quarterly Survey of Property Tax Collections), F-72 (Quarterly Survey of State Tax Collections), and F-73 (Quarterly Survey of Non... data for individual states. The information contained in this survey is the most current information...
29 CFR 548.306 - Average earnings for year or quarter year preceding the current quarter.
Code of Federal Regulations, 2011 CFR
2011-07-01
... PAY Interpretations Authorized Basic Rates § 548.306 Average earnings for year or quarter year... regular rates of pay during the current quarter year, and (ii) such average hourly remuneration during the... 29 Labor 3 2011-07-01 2011-07-01 false Average earnings for year or quarter year preceding the...
2. View to northeast showing quarters and outbuildings, L to ...
2. View to northeast showing quarters and outbuildings, L to R: Service Building (HABS No. VA-1287-D), Medical Officer's Quarters C (in background), Garage (HABS No. VA-1287-F), and Medical Officer's Quarters B - Portsmouth Naval Hospital, Medical Officer's Quarters C, West side Williamson Drive, 400 feet South of Rixey Drive, Portsmouth, Portsmouth, VA
DOE Office of Scientific and Technical Information (OSTI.GOV)
Looney, J.H.; Im, C.J.
The following report presents the technical progress achieved during the first quarter. The completion of this contract entails engineering evaluation in conjunction with basic laboratory research to determine overall process improvements, associated cost savings and the effect of these savings on product price as they relate to the UCC Physical Beneficiation Process for coal-water slurry manufacture. The technical effort for this quarter has concentrated on two basic areas of concern as they relate to the above-mentioned process. First, an engineering evaluation was carried out to examine the critical areas of improvement in the existing UCC Research Corporation single-stage cleaning circuitmore » (coarse coal, heavy media washer). When the plant runs for low ash coal product, at the specific gravity near 1.30, it was found that substantial product contamination resulted from magnetite carry over in the clean coal product. The reduction of the magnetite contamination would entail the application of more spray water to the clean coal drain and rinse screen, and the refinement of the existing dilute media handling system, to accept the increased quality of rinse water. It was also determined that a basic mechanical overhaul is needed on the washbox to ensure dependable operation during the future production of low-ash coal. The various cost elements involved with this renovation were determined by UCC personnel in the operational division. The second area of investigation was concerned with the laboratory evaluation of three separate source coals obtained from United Coal Company (UCC) and nearby mines to determine probable cleanability when using each seam of coal as a feed in the existing beneficiation process. Washability analyses were performed on each sample utilizing a specific gravity range from 1.25 to 1.50. 4 figures, 3 tables.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gordon Tibbitts; Arnis Judzis
2002-04-01
This document details the progress to date on the OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE--A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING contract for the quarter starting January 2002 through March 2002. Accomplishments include the following: In accordance to Task 7.0 (D. No.2 Technical Publications) TerraTek, NETL, and the Industry Contributors successfully presented a paper detailing Phase 1 testing results at the February 2002 IADC/SPE Drilling Conference, a prestigious venue for presenting DOE and private sector drilling technology advances. The full reference is as follows: (1) IADC/SPE 74540 ''World's First Benchmarking of Drilling Mud Hammer Performance atmore » Depth Conditions'' authored by Gordon A. Tibbitts, TerraTek; Roy C. Long, US Department of Energy, Brian E. Miller, BP America, Inc.; Arnis Judzis, TerraTek; and Alan D. Black, TerraTek. Gordon Tibbitts, TerraTek, will presented the well-attended paper in February of 2002. The full text of the Mud Hammer paper was included in the last quarterly report. (2) The Phase 2 project planning meeting (Task 6) was held at ExxonMobil's Houston Greenspoint offices on February 22, 2002. In attendance were representatives from TerraTek, DOE, BP, ExxonMobil, PDVSA, Novatek, and SDS Digger Tools. (3) PDVSA has joined the advisory board to this DOE mud hammer project. PDVSA's commitment of cash and in-kind contributions were reported during the last quarter. (4) Strong Industry support remains for the DOE project. Both Andergauge and Smith Tools have expressed an interest in participating in the ''optimization'' phase of the program. The potential for increased testing with additional Industry cash support was discussed at the planning meeting in February 2002.« less
Bansal, Baljinder K; Hamann, Joern; Grabowskit, Nils Th; Singh, Krishan B
2005-05-01
Seven variables--electrical conductivity (EC), somatic cell count (SCC), N-acetyl-beta-D-glucosaminidase (NAGase), lactose, protein, fat and pH--were compared in four quarter milk fractions (MF1: strict foremilk; MF2: first 12-15 ml foremilk; MF3: subsequent 40-45 ml milk; MF4: strippings) and in one cow composite milk sample (CC) per cow. The study used 142 quarters from 37 lactating cows of the German Black Pied breed. To rule out any possible effect due to management, animal physiology and analytical procedures, the collection and processing of milk samples from each cow was repeated for three consecutive days, and the means of 3-d values were used. All variables were affected significantly by milk fraction and udder health. Compared with foremilk, EC, lactose and protein levels in strippings decreased, while SCC, NAGase and fat increased. The pH of foremilk and strippings did not differ significantly in healthy or in mastitic quarters. The difference between MF1 and MF2 was significant for EC in mastitic quarters, and for SCC in healthy quarters only. In general, mastitis resulted in a significant increase in EC, SCC, NAGase and protein but in a decrease in lactose and fat contents of milk in one or more of the milk fractions studied. Comparison of cow composite milk samples from healthy and mastitic cows revealed the significance (P < 0.01) of udder health for EC, SCC and lactose. Of the different parameters that can distinguish between healthy and mastitic quarters or cows, EC could be used to classify 76% of quarters and 73% of cows correctly, while the lactose content permitted correct identification of 81% of quarters and 76% of cows. NAGase and pH could be used to determine the status of 73% and 61% of quarters, respectively. In general, the correlation observed in strippings was higher than in foremilk for almost all the variables studied. Surprisingly, EC, SCC, NAGase and lactose in milk from healthy quarters of mastitic cows (with at least one mastitic quarter) differed significantly (P < 0.05) from those from healthy quarters of cows with all four healthy quarters, indicating an inconsistent effect of mastitic quarters on neighbouring healthy quarters (quarter interdependence).
1. CARRIAGE HOUSE (left) AND SLAVE QUARTERS, SOUTH FRONT. A ...
1. CARRIAGE HOUSE (left) AND SLAVE QUARTERS, SOUTH FRONT. A kitchen was included in the quarters. - Charles Fraser House, Carriage House & Slave Quarters, 55 King Street, Charleston, Charleston County, SC
EMSL Quarterly Highlights Report: 1st Quarter, Fiscal Year 2009
DOE Office of Scientific and Technical Information (OSTI.GOV)
Showalter, Mary Ann; Kathmann, Loel E.; Manke, Kristin L.
2009-02-02
The EMSL Quarterly Highlights Report covers the science, staff and user recognition, and publication activities that occurred during the 1st quarter (October 2008 - December 2008) of Fiscal Year 2009.
Idaho National Laboratory Quarterly Occurrence Analysis for the 1st Quarter FY2017
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mitchell, Lisbeth Ann
This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 82 reportable events (13 from the 1st quarter (Qtr) of fiscal year (FY) 2017 and 68 from the prior three reporting quarters), as well as 31 other issue reports (including events found to be not reportable and Significantmore » Category A and B conditions) identified at INL during the past 12 months (seven from this quarter and 24 from the prior three quarters).« less
Notable deals in the pharmaceutical industry in the first quarter of 2017.
Cruces, E
2017-06-01
During the first quarter of 2017, Cortellis Competitive Intelligence had 1,073 new deals added as part of its ongoing coverage of pharmaceutical licensing activity. This meant a slight increase on the last quarter (1,022) and a similar volume on the same quarter for the previous 1 year (1,141). However, this quarter showed a significant augment in deals worth more than USD 0.5 billion on the last quarter (17 vs. 12). This article will focus on highlighting a number of the most valuable and notable deals forged during the quarter, as well as a selection of deals from some of the most prolific deal makers. An update on milestone, options and terminated deals of significance will also be presented, along with an early outlook on the next quarter's pharmaceutical licensing activity.
How to Boost Engineering Support Via Web 2.0 - Seeds for the Ares Project...and/or Yours?
NASA Technical Reports Server (NTRS)
Scott, David W.
2010-01-01
The Mission Operations Laboratory (MOL) at Marshall Space Flight Center (MSFC) is responsible for Engineering Support capability for NASA s Ares launch system development. In pursuit of this, MOL is building the Ares Engineering and Operations Network (AEON), a web-based portal intended to provide a seamless interface to support and simplify two critical activities: a) Access and analyze Ares manufacturing, test, and flight performance data, with access to Shuttle data for comparison. b) Provide archive storage for engineering instrumentation data to support engineering design, development, and test. A mix of NASA-written and COTS software provides engineering analysis tools. A by-product of using a data portal to access and display data is access to collaborative tools inherent in a Web 2.0 environment. This paper discusses how Web 2.0 techniques, particularly social media, might be applied to the traditionally conservative and formal engineering support arena. A related paper by the author [1] considers use
Software Engineering Guidebook
NASA Technical Reports Server (NTRS)
Connell, John; Wenneson, Greg
1993-01-01
The Software Engineering Guidebook describes SEPG (Software Engineering Process Group) supported processes and techniques for engineering quality software in NASA environments. Three process models are supported: structured, object-oriented, and evolutionary rapid-prototyping. The guidebook covers software life-cycles, engineering, assurance, and configuration management. The guidebook is written for managers and engineers who manage, develop, enhance, and/or maintain software under the Computer Software Services Contract.
The dynamic relationship between social support and HIV-related stigma in rural Uganda.
Takada, Sae; Weiser, Sheri D; Kumbakumba, Elias; Muzoora, Conrad; Martin, Jeffrey N; Hunt, Peter W; Haberer, Jessica E; Kawuma, Annet; Bangsberg, David R; Tsai, Alexander C
2014-08-01
Cross-sectional studies show that human immunodeficiency virus (HIV) stigma is negatively correlated with social support. The purpose of this study is to examine the bidirectional relationship between social support and HIV stigma. We collected quarterly data from a cohort of 422 people living with HIV in Uganda, followed for a median of 2.1 years. We used multilevel regression to model the contemporaneous and 3-month-lagged associations between social support and both enacted and internalized stigma. Lagged enacted stigma was negatively correlated with emotional and instrumental social support, and lagged instrumental social support was negatively correlated with enacted stigma. Internalized stigma and emotional social support had reciprocal lagged associations. Interventions to reduce enacted stigma may strengthen social support for people living with HIV. Improved social support may in turn have a protective influence against future enacted and internalized stigma.
The Dynamic Relationship Between Social Support and HIV-Related Stigma in Rural Uganda
Weiser, Sheri D.; Kumbakumba, Elias; Muzoora, Conrad; Martin, Jeffrey N.; Hunt, Peter W.; Haberer, Jessica E.; Kawuma, Annet; Bangsberg, David R.; Tsai, Alexander C.
2014-01-01
Background Cross-sectional studies show that human immunodeficiency virus (HIV) stigma is negatively correlated with social support. Purpose The purpose of this study is to examine the bidirectional relationship between social support and HIV stigma. Methods We collected quarterly data from a cohort of 422 people living with HIV in Uganda, followed for a median of 2.1 years. We used multilevel regression to model the contemporaneous and 3-month-lagged associations between social support and both enacted and internalized stigma. Results Lagged enacted stigma was negatively correlated with emotional and instrumental social support, and lagged instrumental social support was negatively correlated with enacted stigma. Internalized stigma and emotional social support had reciprocal lagged associations. Conclusions Interventions to reduce enacted stigma may strengthen social support for people living with HIV. Improved social support may in turn have a protective influence against future enacted and internalized stigma. PMID:24500077
American Society of Civil Engineers | ASCE
Diversity and Inclusion Civil Engineering Salaries Pre-College Outreach Student Resources University Civil Engineering Salaries Support for Students & Teachers Pre-College Outreach Student Resources Ethics Diversity and Inclusion Civil Engineering Salaries Support for Students & Teachers Pre-College
Focus on Families! How to Build and Support Family-Centered Practices in After School
ERIC Educational Resources Information Center
Kakli, Zenub; Kreider, Holly; Little, Priscilla; Buck, Tania; Coffey, Maryellen
2006-01-01
Children benefit when their parents or caregivers are actively involved in their out-of-school learning. Yet a new report by the Harvard Family Research Project and United Way of Massachusetts Bay finds that only a quarter of programs surveyed had effectively incorporated families. This guide, funded by the Wallace Foundation under its Parents and…
Success and Design of Local Referenda for Land Conservation
ERIC Educational Resources Information Center
Banzhaf, H. Spencer; Oates, Wallace E.; Sanchirico, James N.
2010-01-01
From 1998 to 2006, over three-quarters of the more than 1,550 U.S. referenda targeting open space passed. We analyze the success of the conservation movement at holding referenda in areas with greater ecological value and greater likelihood of supporting conservation. To do so, we first analyze the patterns in where referenda are held and in which…
ERIC Educational Resources Information Center
Universal Service Administrative Company, 2008
2008-01-01
This report includes examples of how Universal Service Fund support is used by beneficiaries across the country. Included in this version are approximately 140 success stories of how the Universal Service Fund is helping to improve connectivity in the United States. This report is updated quarterly, as Universal Service Administrative Company…
Prototype solar heating and cooling systems including potable hot water
NASA Technical Reports Server (NTRS)
1978-01-01
These combined quarterly reports summarize the activities from November 1977 through September 1978, and over the progress made in the development, delivery and support of two prototype solar heating and cooling systems including potable hot water. The system consists of the following subsystems: solar collector, auxiliary heating, potable hot water, storage, control, transport, and government-furnished site data acquisition.
Behavioural Interventions for Self Injurious Behaviour: A Review of Recent Evidence (1998-2008)
ERIC Educational Resources Information Center
Prangnell, Simon J.
2010-01-01
Estimates suggest that up to one quarter of people who have a severe learning disability engage in self injurious behaviour (SIB). SIB poses serious risks, both to the person's physical health and their quality of life. Behavioural approaches have made a contribution to supporting people who engage in SIB, although the last review of these…
Taking Aim at Important Targets in Sarcoma | Center for Cancer Research
Rhabdomyosarcoma (RMS) is the most common childhood soft tissue sarcoma, a cancer of the body’s connective or supportive tissues such as muscle, cartilage, or fat. The two major classifications of RMS include the embryonal subtype, which accounts for approximately three-quarters of children diagnosed with RMS, and the more aggressive alveolar (ARMS) subtype, which has a
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-07
... often refinanced well in advance of the long-term maturity date of the loan due to [[Page 14812... be refinanced. The FHA refinanced mortgage has a 35-year term. Nature of Requirement: To achieve the... favorable terms would preserve needed affordable housing that is strongly supported by both the State of New...
Ideas for Preservation Fund Raising: A Support Package for Libraries and Archives.
ERIC Educational Resources Information Center
Commission on Preservation and Access, Washington, DC.
Preservation efforts are needed immediately to save a quarter of all the volumes housed in research libraries. These books are turning to dust because alum sizing was introduced into the paper-making process in the mid-1800s. The destruction of some books can be reversed through deacidification. The content of other books can be saved only by…
Aging in the United States: An Education Module.
ERIC Educational Resources Information Center
Population Reference Bureau, Inc., Washington, DC.
The elderly are projected to make up a quarter of the U.S. population by the year 2025. This teaching kit introduces students to the major issues surrounding the growth of the elderly population. Young people whom older citizens are counting on for care and support are, for the most part, unaware of the impact that this burgeoning older population…
Datacomputer and Sip Operations
1977-03-31
IO PUBLIC T~LLINOVI 198 DISTRIBJTIONUINIMITED-3 LJSubmitted to: Defense Advanced Research Projects Agency 1400 Wilson Boulevard Arlington, Virginia...Quarterly Technical Report January 1, 1977 to March 31, 1977 This research is supported by the Defense Advanced Research Projects Agency of the Department of...necessarily representing the official policies, either expressed or implied, of the Defense Advanced Research Projects Agency or the U.S. Government
DOE Office of Scientific and Technical Information (OSTI.GOV)
B. Lanning; J. Arps
2004-04-01
Extending upon development efforts last quarter to produce ''free-standing'', copper and palladium alloy films, the goal this quarter has been to produce pinhole-free, Pd-Cu alloy films up to 5 x 5 inches in area (1-3 microns thick) using both magnetron sputtering and e-beam evaporation on PVA (Solublon) and polystyrene backing materials. A set of experiments were conducted to assess processing methods/solutions chemistry for removing the polymer backing material from the Pd-Cu film. For all of the alloy films produced to this point, we were unable to produce pinhole-free films on plastic although we were able to produce free-standing Pd-Cu filmsmore » at less than 0.5 microns thick with minimal intrinsic stress. Subsequently, to evaluate gas permeation and leakage across the films, two films were sandwiched together on top of a porous Monel support disc (25 mm in diameter) and then tested in a leak test apparatus. Using two Cu films (10 micron thickness total) in the sandwich configuration, leak rates were about 20% of the background leak rate.« less
Notable licensing deals in the biopharma industry in the second quarter of 2017.
D'Souza, P
2017-08-01
During the second quarter of 2017, Cortellis Competitive Intelligence added 967 new licensing deals (excluding mergers and acquisition deals) as part of its ongoing coverage of pharmaceutical licensing activity. This meant an 8% decrease on the previous quarter (1,050) and a 3% decrease from the same quarter in 2016 (993). This quarter also showed a significant decline in the number of deals worth more than USD 0.5 billion from the last quarter (7 vs. 17). This article will highlight a number of the most valuable and notable deals forged during the quarter, as well as a selection of deals from some of the most prolific deal makers in the life sciences. An update on milestone, options and terminated deals of significance will also be presented, along with an early outlook on the next quarter's pharmaceutical licensing activity.
14 CFR 23.371 - Gyroscopic and aerodynamic loads.
Code of Federal Regulations, 2010 CFR
2010-01-01
... Flight Loads § 23.371 Gyroscopic and aerodynamic loads. (a) Each engine mount and its supporting... engine mount and its supporting structure must meet the requirements of paragraph (a) of this section and.... (c) For airplanes certificated in the commuter category, each engine mount and its supporting...
14 CFR 23.371 - Gyroscopic and aerodynamic loads.
Code of Federal Regulations, 2013 CFR
2013-01-01
... Flight Loads § 23.371 Gyroscopic and aerodynamic loads. (a) Each engine mount and its supporting... engine mount and its supporting structure must meet the requirements of paragraph (a) of this section and.... (c) For airplanes certificated in the commuter category, each engine mount and its supporting...
14 CFR 23.371 - Gyroscopic and aerodynamic loads.
Code of Federal Regulations, 2014 CFR
2014-01-01
... Flight Loads § 23.371 Gyroscopic and aerodynamic loads. (a) Each engine mount and its supporting... engine mount and its supporting structure must meet the requirements of paragraph (a) of this section and.... (c) For airplanes certificated in the commuter category, each engine mount and its supporting...
14 CFR 23.371 - Gyroscopic and aerodynamic loads.
Code of Federal Regulations, 2011 CFR
2011-01-01
... Flight Loads § 23.371 Gyroscopic and aerodynamic loads. (a) Each engine mount and its supporting... engine mount and its supporting structure must meet the requirements of paragraph (a) of this section and.... (c) For airplanes certificated in the commuter category, each engine mount and its supporting...
14 CFR 23.371 - Gyroscopic and aerodynamic loads.
Code of Federal Regulations, 2012 CFR
2012-01-01
... Flight Loads § 23.371 Gyroscopic and aerodynamic loads. (a) Each engine mount and its supporting... engine mount and its supporting structure must meet the requirements of paragraph (a) of this section and.... (c) For airplanes certificated in the commuter category, each engine mount and its supporting...
Science in Flux: NASA's Nuclear Program at Plum Brook Station 1955-2005
NASA Technical Reports Server (NTRS)
Bowles, Mark D.
2006-01-01
Science in Flux traces the history of one of the most powerful nuclear test reactors in the United States and the only nuclear facility ever built by NASA. In the late 1950's NASA constructed Plum Brook Station on a vast tract of undeveloped land near Sandusky, Ohio. Once fully operational in 1963, it supported basic research for NASA's nuclear rocket program (NERVA). Plum Brook represents a significant, if largely forgotten, story of nuclear research, political change, and the professional culture of the scientists and engineers who devoted their lives to construct and operate the facility. In 1973, after only a decade of research, the government shut Plum Brook down before many of its experiments could be completed. Even the valiant attempt to redefine the reactor as an environmental analysis tool failed, and the facility went silent. The reactors lay in costly, but quiet standby for nearly a quarter-century before the Nuclear Regulatory Commission decided to decommission the reactors and clean up the site. The history of Plum Brook reveals the perils and potentials of that nuclear technology. As NASA, Congress, and space enthusiasts all begin looking once again at the nuclear option for sending humans to Mars, the echoes of Plum Brook's past will resonate with current policy and space initiatives.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mankin, C.J.; Grasmick, M.K.
The Oklahoma Geological Survey (OGS), the Geological Information Systems department, and the School of Petroleum and Geological Engineering at the University of Oklahoma have engaged in a program to identify and address Oklahoma`s oil recovery opportunities in fluvial-dominated deltaic (FDD) reservoirs. This program includes the systematic and comprehensive collection and evaluation of information on all of Oklahoma`s FDD reservoirs and the recovery technologies that have been (or could be) applied to those reservoirs with commercial success. This data collection and evaluation effort will be the foundation for an aggressive, multifaceted technology transfer program that is designed to support all ofmore » Oklahoma`s oil industry, with particular emphasis on smaller companies and independent operators in their attempts to maximize the economic producibility of FDD reservoirs. Specifically, this project will identify all FDD oil reservoirs in the State; group those reservoirs into plays that have similar depositional and subsequent geologic histories; collect, organize and analyze all available data; conduct characterization and simulation studies on selected reservoirs in each play; and implement a technology transfer program targeted to the operators of FDD reservoirs to sustain the life expectancy of existing wells with the ultimate objective of increasing oil recovery.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mankin, C.J.; Banken, M.K.
The Oklahoma Geological Survey (OGS), the Geo Information Systems department, and the School of Petroleum and Geological Engineering at the University of Oklahoma are engaged in a program to identify and address Oklahoma`s oil recovery opportunities in fluvial-dominated deltaic (FDD) reservoirs. This program includes the systematic and comprehensive collection and evaluation of information on all of Oklahoma`s FDD reservoirs and the recovery technologies that have been (or could be) applied to those reservoirs with commercial success. This data collection and evaluation effort will be the foundation for an aggressive, multifaceted technology transfer program that is designed to support all ofmore » Oklahoma`s oil industry, with particular emphasis on smaller companies and independent operators in their attempts to maximize the economic producibility of FDD reservoirs. Specifically, this project will identify all FDD oil reservoirs in the State; group those reservoirs into plays that have similar depositional and subsequent geologic histories; collect, organize and analyze all available data; conduct characterization and simulation studies on selected reservoirs in each play; and implement a technology transfer program targeted to the operators of FDD reservoirs to sustain the life expectancy of existing wells with the ultimate objective of increasing oil recovery.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mankin, C.J.; Banken, M.K.
The Oklahoma Geological Survey (OGS), the Geological Information Systems department, and the School of Petroleum and Geological Engineering at the University of Oklahoma are engaging in a program to identify and address Oklahoma`s oil recovery opportunities in fluvial-dominated deltaic (FDD) reservoirs. This program includes the systematic and comprehensive collection and evaluation of information on all of Oklahoma`s FDD reservoirs and the recovery technologies that have been (or could be) applied to those reservoirs with commercial success. This data collection and evaluation effort will be the foundation for an aggressive, multifaceted technology transfer program that is designed to support all ofmore » Oklahoma`s oil industry, with particular emphasis on smaller companies and independent operators in their attempts to maximize the economic producibility of FDD reservoirs. Specifically, this project will identify all FDD oil reservoirs in the State; group those reservoirs into plays that have similar depositional and subsequent geologic histories; collect, organize and analyze all available data; conduct characterization and simulation studies on selected reservoirs in each play; and implement a technology transfer program targeted to the operators of FDD reservoirs to sustain the life expectancy of existing wells with the ultimate objective of increasing oil recovery.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mankin, C.J.; Banken, M.K.
The Oklahoma Geological Survey (OGS), the Geological Information Systems department, and the School of Petroleum and Geological Engineering at the University of Oklahoma are engaging in a program to identify and address Oklahoma`s oil recovery opportunities in fluvial-dominated deltaic (FDD) reservoirs. This program includes the systematic and comprehensive collection and evaluation of information on all of Oklahoma`s FDD reservoirs and the recovery technologies that have been (or could be) applied to those reservoirs with commercial success. This data collection and evaluation effort will be the foundation for an aggressive, multifaceted technology transfer program that is designed to support all ofmore » Oklahoma`s oil industry, with particular emphasis on smaller companies and independent operators in their attempts to maximize the economic producibility of FDD reservoirs. Specifically, this project will identify all FDD oil reservoirs in the State; group those reservoirs into plays that have similar depositional and subsequent geologic histories; collect, organize and analyze all available data; conduct characterization and simulation studies on selected reservoirs in each play; and implement a technology transfer program targeted to the operators of FDD reservoirs to sustain the life expectancy of existing wells with the ultimate objective of increasing oil recovery.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mankin, G.J.; Banken, M.K.
The Oklahoma Geological Survey (OGS), the Geological Information Systems department, and the School of Petroleum and Geological Engineering at the University of Oklahoma are engaging in a program to identify and address Oklahoma`s oil recovery opportunities in fluvial-dominated deltaic (FDD) reservoirs. This program includes the systematic and comprehensive collection and evaluation of information on all of Oklahoma`s FDD reservoirs and the recovery-technologies that have been (or could be) applied to those reservoirs with commercial success. This data collection and evaluation effort will be the foundation for an aggressive, multifaceted technology transfer program that is designed to support all of Oklahoma`smore » oil industry, with particular emphasis on smaller companies and independent operators in their attempts to maximize the economic producibility of FDD reservoirs. Specifically, this project will identify all FDD oil reservoirs in the State; group those reservoirs into plays that have similar depositional and subsequent geologic histories; collect, organize and analyze all available data; conduct characterization and simulation studies on selected reservoirs in each play; and implement a technology transfer program targeted to the operators of FDD reservoirs to sustain the life expectancy of existing wells with the ultimate objective of increasing oil recovery.« less
Molecular Oncology Testing in Resource-Limited Settings
Gulley, Margaret L.; Morgan, Douglas R.
2015-01-01
Cancer prevalence and mortality are high in developing nations, where resources for cancer control are inadequate. Nearly one-quarter of cancers in resource-limited nations are infection related, and molecular assays can capitalize on this relationship by detecting pertinent pathogen genomes and human gene variants to identify those at highest risk for progression to cancer, to classify lesions, to predict effective therapy, and to monitor tumor burden over time. Prime examples are human papillomavirus in cervical neoplasia, Helicobacter pylori and Epstein-Barr virus in gastric adenocarcinoma and lymphoma, and hepatitis B or C virus in hepatocellular cancer. Research is underway to engineer devices that overcome social, economic, and technical barriers limiting effective laboratory support. Additional challenges include an educated workforce, infrastructure for quality metrics and record keeping, and funds to sustain molecular test services. The combination of well-designed interfaces, novel and robust electrochemical technology, and telemedicine tools will promote adoption by frontline providers. Fast turnaround is crucial for surmounting loss to follow-up, although increased use of cell phones, even in rural areas, enhances options for patient education and engagement. Links to a broadband network facilitate consultation and centralized storage of medical data. Molecular technology shows promise to address gaps in health care through rapid, user-friendly, and cost-effective devices reflecting clinical priorities in resource-poor areas. PMID:25242061
Horizontally opposed trunnion forward engine mount system supported beneath a wing pylon
NASA Technical Reports Server (NTRS)
Seaquist, John D. (Inventor); Culbertson, Chris (Inventor)
2000-01-01
The present invention relates to an engine mount assembly for supporting an aircraft engine in aft-cantilevered position beneath the aircraft wing. The assembly includes a pair forward engine mounts positioned on opposite sides of an integrally formed yoke member wrapped about the upper half of the engine casing. Each side of the yoke is preferably configured as an A-shaped frame member with the bottom portions joining each other and the pylon. To prevent backbone bending of the engine trunnion assembly, the forward engine mounts supported at opposite ends of the yoke engage the casing along its centerline. The trunnion assembly is preferably constructed of high strength titanium machined and/or forged.
Software development environments: Status and trends
NASA Technical Reports Server (NTRS)
Duffel, Larry E.
1988-01-01
Currently software engineers are the essential integrating factors tying several components together. The components consist of process, methods, computers, tools, support environments, and software engineers. The engineers today empower the tools versus the tools empowering the engineers. Some of the issues in software engineering are quality, managing the software engineering process, and productivity. A strategy to accomplish this is to promote the evolution of software engineering from an ad hoc, labor intensive activity to a managed, technology supported discipline. This strategy may be implemented by putting the process under management control, adopting appropriate methods, inserting the technology that provides automated support for the process and methods, collecting automated tools into an integrated environment and educating the personnel.
Nuclear Engine System Simulation (NESS) version 2.0
NASA Technical Reports Server (NTRS)
Pelaccio, Dennis G.; Scheil, Christine M.; Petrosky, Lyman J.
1993-01-01
The topics are presented in viewgraph form and include the following; nuclear thermal propulsion (NTP) engine system analysis program development; nuclear thermal propulsion engine analysis capability requirements; team resources used to support NESS development; expanded liquid engine simulations (ELES) computer model; ELES verification examples; NESS program development evolution; past NTP ELES analysis code modifications and verifications; general NTP engine system features modeled by NESS; representative NTP expander, gas generator, and bleed engine system cycles modeled by NESS; NESS program overview; NESS program flow logic; enabler (NERVA type) nuclear thermal rocket engine; prismatic fuel elements and supports; reactor fuel and support element parameters; reactor parameters as a function of thrust level; internal shield sizing; and reactor thermal model.
42 CFR 433.10 - Rates of FFP for program services.
Code of Federal Regulations, 2013 CFR
2013-10-01
...; (B) 95 percent, for calendar quarters in CY 2017; (C) 94 percent, for calendar quarters in CY 2018... quarters in CY 2018; and (F) 100 percent, for calendar quarters in CY 2019 and all subsequent calendar...
Boothby, J T; Jasper, D E; Thomas, C B
1986-01-01
The effect of vaccination on milk production was evaluated in vaccinated and control cows experimentally challenged in two of four quarters with live Mycoplasma bovis. During the first three weeks after experimental challenge, six of eight unchallenged quarters on vaccinated cows and seven of eight unchallenged quarters on control cows became infected. Most of these quarters secreted normal milk, with negative California Mastitis Test scores and maintained normal milk production throughout most of the study (although some quarters on control cows remained infected). All challenged quarters became infected, had strong California Mastitis Test reactions, and had a drastic (greater than 85%) loss in milk production. Thereafter, four of eight challenged quarters on control cows remained infected, had mostly positive California Mastitis Test scores, produced mostly normal-appearing milk, and recovered some productive capabilities. By the end of the study no M. bovis could be recovered from challenged quarters on vaccinated cows and the milk appeared mostly normal. The California Mastitis Test scores on these quarters, however, remained elevated and milk production remained very low. PMID:3756674
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rohay, Alan C.; Sweeney, Mark D.; Hartshorn, Donald C.
The Hanford Seismic Assessment Program (HSAP) provides an uninterrupted collection of high-quality raw and processed seismic data from the Hanford Seismic Network for the U.S. Department of Energy and its contractors. The HSAP is responsible for locating and identifying sources of seismic activity and monitoring changes in the historical pattern of seismic activity at the Hanford Site. The data are compiled, archived, and published for use by the Hanford Site for waste management, natural phenomena hazards assessments, and engineering design and construction. In addition, the HSAP works with the Hanford Site Emergency Services Organization to provide assistance in the eventmore » of a significant earthquake on the Hanford Site. The Hanford Seismic Network and the Eastern Washington Regional Network consist of 44 individual sensor sites and 15 radio relay sites maintained by the Hanford Seismic Assessment Team. The Hanford Seismic Network recorded 23 local earthquakes during the third quarter of FY 2010. Sixteen earthquakes were located at shallow depths (less than 4 km), five earthquakes at intermediate depths (between 4 and 9 km), most likely in the pre-basalt sediments, and two earthquakes were located at depths greater than 9 km, within the basement. Geographically, twelve earthquakes were located in known swarm areas, 3 earthquakes occurred near a geologic structure (Saddle Mountain anticline), and eight earthquakes were classified as random events. The highest magnitude event (3.0 Mc) was recorded on May 8, 2010 at depth 3.0 km with epicenter located near the Saddle Mountain anticline. Later in the quarter (May 24 and June 28) two additional earthquakes were also recorded nearly at the same location. These events are not considered unusual in that earthquakes have been previously recorded at this location, for example, in October 2006 (Rohay et al; 2007). Six earthquakes were detected in the vicinity of Wooded Island, located about eight miles north of Richland just west of the Columbia River. The Wooded Island events recorded this quarter were a continuation of the swarm events observed during the 2009 and 2010 fiscal years and reported in previous quarterly and annual reports (Rohay et al; 2009a, 2009b, 2009c, 2010a, and 2010b). All events were considered minor (coda-length magnitude [Mc] less than 1.0) with a maximum depth estimated at 1.7 km. Based upon this quarters activity it is likely that the Wooded Island swarm has subsided. Pacific Northwest National Laboratory (PNNL) will continue to monitor for activity at this location.« less
Publications of the Jet Propulsion Laboratory, 1992
NASA Technical Reports Server (NTRS)
1994-01-01
JPL Bibliography 39-33 describes and indexes by primary author the externally distributed technical reporting, released during calendar year 1992, that resulted from scientific and engineering work performed or managed by the Jet Propulsion Laboratory. Three classes of publications are included: (1) JPL Publication (92-series) in which the information is complete for a specific accomplishment; (2) articles from the quarterly Telecommunications and Data Acquisition (TDA) Progress Report (42-series) (each collection of articles in this class of publication presents a periodic survey of current accomplishments by the Deep Space Network as well as other developments in Earth-based radio technology); and (3) articles published in the open literature.
ISS Expedition 55-56 Crew Launches to the International Space Station
2018-03-21
Expedition 55-56 Soyuz Commander Oleg Artemyev of Roscosmos and Flight Engineers Drew Feustel and Ricky Arnold of NASA launched on the Russian Soyuz MS-08 spacecraft on Mar. 21 from the Baikonur Cosmodrome in Kazakhstan to begin a two-day journey to the International Space Station and the start of a five month mission on the outpost. The footage also contains the crew's pre-launch activities that included their departure from their Cosmonaut Hotel crew quarters, their suit-up in the Cosmodrome's Integration Facility, walk out to their crew bus and arrival at the launch pad to board their spacecraft.
Expedition 52-53 Launches to the International Space Station
2017-07-28
Expedition 52-53 Soyuz Commander Sergey Ryazanskiy of Roscosmos and Flight Engineers Randy Bresnik of NASA and Paolo Nespoli of ESA (European Space Agency) launched on the Russian Soyuz MS-05 spacecraft July 28 from the Baikonur Cosmodrome in Kazakhstan. The trio began a six-hour journey to the International Space Station and the start of a four-and-a-half month mission on the outpost. The footage contains the crew’s prelaunch activities including their departure from their crew quarters, suit-up in the Cosmodrome’s Integration Facility, walk out to the crew bus and arrival at the launch pad to board the spacecraft.
Stability margin of linear systems with parameters described by fuzzy numbers.
Husek, Petr
2011-10-01
This paper deals with the linear systems with uncertain parameters described by fuzzy numbers. The problem of determining the stability margin of those systems with linear affine dependence of the coefficients of a characteristic polynomial on system parameters is studied. Fuzzy numbers describing the system parameters are allowed to be characterized by arbitrary nonsymmetric membership functions. An elegant solution, graphical in nature, based on generalization of the Tsypkin-Polyak plot is presented. The advantage of the presented approach over the classical robust concept is demonstrated on a control of the Fiat Dedra engine model and a control of the quarter car suspension model.
NASA Technical Reports Server (NTRS)
1985-01-01
The 3rd Quarter Status Report on DFVLR's ROSAT project confirms that with regard to technical performance and costs the project is on schedule. The valid schedule for engineering model and flight model completion on May 7, 1985 leads to a launch date on October 30, 1987. Progress in each department is compared to and explained with regard to the milestone plan. Continued problems with the gold damping of the FM-mirror system and contamination of the sterile rooms where the mirrors are stored have led to postponement of milestone 7. It is not yet completely clear to what extent all successive milestones will be affected by this factor.
[Development of a medical equipment support information system based on PDF portable document].
Cheng, Jiangbo; Wang, Weidong
2010-07-01
According to the organizational structure and management system of the hospital medical engineering support, integrate medical engineering support workflow to ensure the medical engineering data effectively, accurately and comprehensively collected and kept in electronic archives. Analyse workflow of the medical, equipment support work and record all work processes by the portable electronic document. Using XML middleware technology and SQL Server database, complete process management, data calculation, submission, storage and other functions. The practical application shows that the medical equipment support information system optimizes the existing work process, standardized and digital, automatic and efficient orderly and controllable. The medical equipment support information system based on portable electronic document can effectively optimize and improve hospital medical engineering support work, improve performance, reduce costs, and provide full and accurate digital data
Structural cooling fluid tube for supporting a turbine component and supplying cooling fluid
DOE Office of Scientific and Technical Information (OSTI.GOV)
Charron, Richard; Pierce, Daniel
2015-02-24
A shaft cover support for a gas turbine engine is disclosed. The shaft cover support not only provides enhanced support to a shaft cover of the gas turbine engine, but also includes a cooling fluid chamber for passing fluids from a rotor air cooling supply conduit to an inner ring cooling manifold. As such, the shaft cover support accomplishes in a single component what was only partially accomplished in two components in conventional configurations. The shaft cover support may also provide additional stiffness and reduce interference of the flow from the compressor. In addition, the shaft cover support accommodates amore » transition section extending between compressor and turbine sections of the engine. The shaft cover support has a radially extending region that is offset from the inlet and outlet that enables the shaft cover support to surround the transition, thereby reducing the overall length of this section of the engine.« less
1. GENERAL VIEW OF SLAVE QUARTERS No. 2 (right). Located ...
1. GENERAL VIEW OF SLAVE QUARTERS No. 2 (right). Located north of main house. The building at left is Slave Quarters No. 1 (HABS No. VA-1233 C) - Westend, Slave Quarters No. 2, Route 638 vicinity, Trevilians, Louisa County, VA
Idaho National Laboratory Quarterly Occurrence Analysis - 3rd Quarter FY-2016
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mitchell, Lisbeth Ann
This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 73 reportable events (23 from the 3rd Qtr FY-16 and 50 from the prior three reporting quarters), as well as 45 other issue reports (including events found to be not reportable and Significant Category A and B conditions)more » identified at INL during the past 12 months (16 from this quarter and 29 from the prior three quarters).« less
Idaho National Laboratory Quarterly Occurrence Analysis - 1st Quarter FY 2016
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mitchell, Lisbeth Ann
This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 74 reportable events (16 from the 1st Qtr FY-16 and 58 from the prior three reporting quarters), as well as 35 other issue reports (including events found to be not reportable and Significant Category A and B conditions)more » identified at INL during the past 12 months (15 from this quarter and 20 from the prior three quarters).« less
Environmental Hazards Assessment Program. Quarterly report, July--September 1995
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
This report describes activities and reports on progress for the first quarter (July--September) of the fourth year of the grant to support the Environmental Hazards Assessment Program (EHAP) at the Medical University of South Carolina. It reports progress against the grant objectives and the Program Implementation Plan published at the end of the first year of the grant. The objectives of EHAP stated in the proposal to DOE are to: (1) develop a holistic, national basis for risk assessment, risk management, and risk communication that recognizes the direct impact of environmental hazards on the health and well-being of all; (2)more » develop a pool of talented scientists and experts in cleanup activities, especially in human health aspects; and (3) identify needs and develop programs addressing the critical shortage of well-educated, highly-skilled technical and scientific personnel to address the health-oriented aspects of environmental restoration and waste management.« less
The ecological effect of unemployment on the incidence of very low birthweight in Norway and Sweden.
Catalano, R; Hansen, H T; Hartig, T
1999-12-01
Little attention has been paid to the ecological effects of unemployment, despite strong theory suggesting that being socially or economically connected to unemployed persons can induce illness. Theory suggests, for example, that the labor market experience of adult males should affect maternal and infant health. We advance this line of inquiry by testing the hypothesis that quarterly increases in unemployment among Norwegian and Swedish males were associated with increased incidence of very low weight births from 1973 through 1995. Results support the hypothesis. We estimate that approximately 188 very low weight births could have been averted in Norway, and about 329 in Sweden, if quarterly increases in male unemployment had been constrained to the median over the 23-year period. Our findings imply that the social cost of unemployment may be underestimated by focusing on unemployment as an individual risk factor.
Inertial Confinement Fusion Quarterly Report: April--June 1993. Volume 3, Number 3
DOE Office of Scientific and Technical Information (OSTI.GOV)
MacGowan, B.J.; Kotowski, M.; Schleich, D.
1993-11-01
This issue of the ICF Quarterly contains six articles describing recent advances in Lawrence Livermore National Laboratory`s inertial confinement fusion (ICF) program. The current emphasis of the ICF program is in support of DOE`s National Ignition Facility (NIF) initiative for demonstrating ignition and gain with a 1-2 MJ glass laser. The articles describe recent Nova experiments and investigations tailored towards enhancing understanding of the key physics and technological issues for the NIF. Titles of the articles are: development of large-aperture KDP crystals; inner-shell photo-ionized X-ray lasers; X-ray radiographic measurements of radiation-driven shock and interface motion in solid density materials; themore » role of nodule defects in laser-induced damage of multilayer optical coatings; techniques for Mbar to near-Gbar equation-of-state measurements with the Nova laser; parametric instabilities and laser-beam smoothing.« less
Learning cell biology as a team: a project-based approach to upper-division cell biology.
Wright, Robin; Boggs, James
2002-01-01
To help students develop successful strategies for learning how to learn and communicate complex information in cell biology, we developed a quarter-long cell biology class based on team projects. Each team researches a particular human disease and presents information about the cellular structure or process affected by the disease, the cellular and molecular biology of the disease, and recent research focused on understanding the cellular mechanisms of the disease process. To support effective teamwork and to help students develop collaboration skills useful for their future careers, we provide training in working in small groups. A final poster presentation, held in a public forum, summarizes what students have learned throughout the quarter. Although student satisfaction with the course is similar to that of standard lecture-based classes, a project-based class offers unique benefits to both the student and the instructor.
Nodes packaging option for Space Station application
NASA Technical Reports Server (NTRS)
So, Kenneth T.; Hall, John B., Jr.
1988-01-01
Space Station nodes packaging analyses are presented relative to moving environmental control and life support system (ECLSS) equipment from the habitability (HAB) module to node 4, in order to provide more living space and privacy for the crew, remove inherently noisy equipment from the crew quarter, retain crew waste collection and processing equipment in one location, and keep objectionable odor away from the living quarters. In addition, options for moving external electronic equipment from the Space Station truss to pressurized node 3 were evaluated in order to reduce the crew extravehicular-activity time required to install and maintain the equipment. Node size considered in this analysis is 3.66 m in diameter and 5.38 m long. The analysis shows that significant external electronic equipment could be relocated from the Space Station truss structure to node 3, and nonlife critical ECLSS HAB module equipment could be moved to node 4.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Anthony, R.G.; Akgerman, A.
1993-02-01
The objectives of this project are to develop a new catalyst, the kinetics for this catalyst, reactor models for trickle bed, slurry and fixed bed reactors, and simulate the performance of fixed bed trickle flow reactors, slurry flow reactors, and fixed bed gas phase reactors for conversion of a hydrogen lean synthesis gas to isobutylene. The goals for the quarter include: (1) Conduct experiments using a trickle bed reactor to determine the effect of reactor type on the product distribution. (2) Use spherical pellets of silica as a support for zirconia for the purpose of increasing surface, area and performancemore » of the catalysts. (3) Conduct exploratory experiments to determine the effect of super critical drying of the catalyst on the catalyst surface area and performance. (4) Prepare a ceria/zirconia catalyst by the precipitation method.« less
Applied Meteorology Unit (AMU) Quarterly Report First Quarter FY-14
NASA Technical Reports Server (NTRS)
Bauman, William Henry; Crawford, Winifred C.; Shafer, Jaclyn A.; Watson, Leela R.; Huddleston, Lisa L.; Decker, Ryan K.
2014-01-01
NASA's LSP and other programs at Vandenberg Air Force Base (VAFB) use wind forecasts issued by the 30th Operational Support Squadron (30 OSS) to determine if they need to limit activities or protect property such as a launch vehicle due to the occurrence of warning level winds at VAFB in California. The 30 OSS tasked the AMU to provide a wind forecasting capability to improve wind warning forecasts and enhance the safety of their customers' operations. This would allow 30 OSS forecasters to evaluate pressure gradient thresholds between pairs of regional observing stations to help determine the onset and duration of warning category winds. Development of such a tool will require that solid relationships exist between wind speed and the pressure gradient of one or more station pairs. As part of this task, the AMU will also create a statistical climatology of meteorological observations from the VAFB wind towers.
77 FR 51705 - Rescission of Quarterly Financial Reporting Requirements
Federal Register 2010, 2011, 2012, 2013, 2014
2012-08-27
... No. FMCSA-2012-0020] RIN-2126-AB48 Rescission of Quarterly Financial Reporting Requirements AGENCY...: FMCSA withdraws its June 27, 2012, direct final rule eliminating the quarterly financial reporting... future proposing the elimination of the quarterly financial reporting requirements for Form QFR and Form...
Teaching Physics and Feeling Good about It.
ERIC Educational Resources Information Center
Prokop, Charles F.
1988-01-01
Describes a high school physics teaching sequence including more modern topics. The first quarter covers cosmology, astronomy, optics, wave mechanics, relativity, gravity, and quantum theory. The second quarter covers classical mechanics. The third quarter covers electromagnetism and electronics. The fourth quarter consists of thermodynamics and…
10 CFR 34.29 - Quarterly inventory.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 10 Energy 1 2012-01-01 2012-01-01 false Quarterly inventory. 34.29 Section 34.29 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.29 Quarterly inventory. (a) Each licensee shall conduct a quarterly...
10 CFR 34.29 - Quarterly inventory.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 10 Energy 1 2013-01-01 2013-01-01 false Quarterly inventory. 34.29 Section 34.29 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.29 Quarterly inventory. (a) Each licensee shall conduct a quarterly...
10 CFR 34.29 - Quarterly inventory.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 10 Energy 1 2014-01-01 2014-01-01 false Quarterly inventory. 34.29 Section 34.29 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.29 Quarterly inventory. (a) Each licensee shall conduct a quarterly...
10 CFR 34.29 - Quarterly inventory.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 10 Energy 1 2011-01-01 2011-01-01 false Quarterly inventory. 34.29 Section 34.29 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS Equipment § 34.29 Quarterly inventory. (a) Each licensee shall conduct a quarterly...
77 FR 39447 - Revisions to Electric Quarterly Report Filing Process
Federal Register 2010, 2011, 2012, 2013, 2014
2012-07-03
... Quarterly Report Filing Process AGENCY: Federal Energy Regulatory Commission, DOE. ACTION: Notice of... Rule which governs the filing of Electric Quarterly Reports (EQRs), to change the process for filing... Regulatory Commission (Commission) proposes changes to the method for filing Electric Quarterly Reports (EQRs...
A Century of Geology-Curriculum Response to Society: A Case Study at Oregon State University
NASA Astrophysics Data System (ADS)
Grunder, A.; Johnson, J. A.
2014-12-01
Over the past century, the geology curriculum at Oregon State University has remained constant in some areas and changed in others in response to internal (faculty and university) and external (economic, and intellectual) drivers. A decadal summary of 100 years of the geology curriculum at Oregon State University reveals socio-economic patterns. From 1913, when the School of Mines was established, to 1932, when it was dismembered, the geology curriculum was designed in support mining engineering. In that time, the geology department (est. 1914) moved from the School of Mines to the School of Science. Several decades of paleontology-intensive curriculum followed under the leadership of noted paleontologist Earl Packard, as dean and chair. The curriculum transitioned from support of the oil industry in the 60s and 70s, with a strong field emphasis engendered by "Doc" Wilkinson, to increased structure and tectonics emphasis in response to the tectonic revolution under the leadership of structural geologist Robert Yeats. In the last few decades the program has grown diverse in environmental and climatic interests. The early curriculum required a three-course series in determinative mineralogy plus petrography and 3 courses in petrology (igneous, sedimentary and metamorphic), making a core of seven; we require 3 courses today. Like all students in the School of Mines, those with the geology specialization were required to take a field course in surveying and to spend several summer months working in the mining industry. This strong field tradition persisted through time with an introductory field methods class coupled with a summer field camp. The total number of weeks dedicated to field classes, excluding the work experience requirement, has varied from as high as 12 credit-hours to the present 6 (quarters basis). On the other hand, increased short field experiences are reflected by incorporation of more field trips in nearly all courses since the 80's, fostered by accessible transportation. General education courses delivered by geology faculty have mimicked these changes, from early service courses in basic geology for engineering, mining and agriculture to a diverse slate of courses from basic geology to natural hazards and climate.
26 CFR 1.461-1 - General rule for taxable year of deduction.
Code of Federal Regulations, 2010 CFR
2010-04-01
... quarter, 1964 Apr. 1 300,000 2d quarter, 1964 July 1 300,000 3d quarter, 1964 Oct. 1 300,000 4th quarter... of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and on GPO...
10 CFR 34.29 - Quarterly inventory.
Code of Federal Regulations, 2010 CFR
2010-01-01
... RADIOGRAPHIC OPERATIONS Equipment § 34.29 Quarterly inventory. (a) Each licensee shall conduct a quarterly physical inventory to account for all sealed sources and for devices containing depleted uranium received... 10 Energy 1 2010-01-01 2010-01-01 false Quarterly inventory. 34.29 Section 34.29 Energy NUCLEAR...
19 CFR 159.34 - Certified quarterly rate.
Code of Federal Regulations, 2010 CFR
2010-04-01
... TREASURY (CONTINUED) LIQUIDATION OF DUTIES Conversion of Foreign Currency § 159.34 Certified quarterly rate. (a) Countries for which quarterly rate is certified. For the currency of each of the following... York for such foreign currency for a day in that quarter: Australia, Austria, Belgium, Brazil, Canada...
78 FR 59093 - Quarterly Rail Cost Adjustment Factor
Federal Register 2010, 2011, 2012, 2013, 2014
2013-09-25
...)] Quarterly Rail Cost Adjustment Factor AGENCY: Surface Transportation Board, DOT ACTION: Approval of rail cost adjustment factor. SUMMARY: The Board has approved the fourth quarter 2013 rail cost adjustment factor (RCAF) and cost index filed by the Association of American Railroads. The fourth quarter 2013 RCAF...
Code of Federal Regulations, 2012 CFR
2012-10-01
... 49 Transportation 4 2012-10-01 2012-10-01 false Distance requirement for employee sleeping... OF SERVICE OF RAILROAD EMPLOYEES; RECORDKEEPING AND REPORTING; SLEEPING QUARTERS Construction of Railroad-Provided Sleeping Quarters § 228.101 Distance requirement for employee sleeping quarters...
Code of Federal Regulations, 2014 CFR
2014-10-01
... 49 Transportation 4 2014-10-01 2014-10-01 false Distance requirement for employee sleeping... OF SERVICE OF RAILROAD EMPLOYEES; RECORDKEEPING AND REPORTING; SLEEPING QUARTERS Construction of Railroad-Provided Sleeping Quarters § 228.101 Distance requirement for employee sleeping quarters...
Code of Federal Regulations, 2013 CFR
2013-10-01
... 49 Transportation 4 2013-10-01 2013-10-01 false Distance requirement for employee sleeping... OF SERVICE OF RAILROAD EMPLOYEES; RECORDKEEPING AND REPORTING; SLEEPING QUARTERS Construction of Railroad-Provided Sleeping Quarters § 228.101 Distance requirement for employee sleeping quarters...
26 CFR 1.461-1 - General rule for taxable year of deduction.
Code of Federal Regulations, 2014 CFR
2014-04-01
... quarter, 1964 Apr. 1 300,000 2d quarter, 1964 July 1 300,000 3d quarter, 1964 Oct. 1 300,000 4th quarter... of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www...
26 CFR 1.461-1 - General rule for taxable year of deduction.
Code of Federal Regulations, 2011 CFR
2011-04-01
... quarter, 1964 Apr. 1 300,000 2d quarter, 1964 July 1 300,000 3d quarter, 1964 Oct. 1 300,000 4th quarter... of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www...
26 CFR 1.461-1 - General rule for taxable year of deduction.
Code of Federal Regulations, 2012 CFR
2012-04-01
... quarter, 1964 Apr. 1 300,000 2d quarter, 1964 July 1 300,000 3d quarter, 1964 Oct. 1 300,000 4th quarter... of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www...
26 CFR 1.461-1 - General rule for taxable year of deduction.
Code of Federal Regulations, 2013 CFR
2013-04-01
... quarter, 1964 Apr. 1 300,000 2d quarter, 1964 July 1 300,000 3d quarter, 1964 Oct. 1 300,000 4th quarter... of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www...
2016-03-29
Army Engineering and Support Center, Huntsville, Price Reasonableness Determinations for Federal Supply Schedule Orders for Supplies Need...0207.000) │ i Results in Brief U.S. Army Engineering and Support Center, Huntsville, Price Reasonableness Determinations for Federal Supply Schedule...Orders for Supplies Need Improvement Visit us at www.dodig.mil March 29, 2016 Objective We determined whether U.S. Army Corps of Engineers contracting
Tolosa, T; Verbeke, J; Ayana, Z; Piepers, S; Supré, K; De Vliegher, S
2015-07-01
A cross-sectional study on clinical mastitis, intramammary infection (IMI) and blind quarters was conducted on 50 smallholder dairy farms in Jimma, Ethiopia. A questionnaire was performed, and quarters of 211 cows were sampled and bacteriologically cultured. Risk factors at the herd, cow, and quarter level for clinical mastitis and (pathogen-specific) intramammary infection were studied using multilevel modeling. As well, factors associated with quarters being blind were studied. Eleven percent of the cows and 4% of the quarters had clinical mastitis whereas 85% of the cows and 51% of the quarters were infected. Eighteen percent of the cows had one or more blind quarter(s), whereas 6% of the quarters was blind. Non-aureus staphylococci were the most frequently isolated pathogens in both clinical mastitis cases and IMI. The odds of clinical mastitis was lower in herds where heifers were purchased in the last year [odds ratio (OR) with 95% confidence interval: 0.11 (0.01-0.90)], old cows (>4 years) [OR: 0.45 (0.18-1.14)], and quarters not showing teat injury [OR: 0.23 (0.07-0.77)]. The odds of IMI caused by any pathogen was higher in herds not practicing teat drying before milking (opposed to drying teats with 1 towel per cow) [OR: 1.68 (1.05-2.69)], cows in later lactation (>180 DIM opposed to ≤90 DIM) [OR: 1.81 (1.14-2.88)], cows with a high (>3) body condition score (BCS) [OR: 1.57 (1.06-2.31)], right quarters (opposed to a left quarter position) [OR: 1.47 (1.10-1.98)], and quarters showing teat injury [OR: 2.30 (0.97-5.43)]. Quarters of cows in herds practicing bucket-fed calf feeding (opposed to suckling) had higher odds of IMI caused by Staphylococcus aureus [OR: 6.05 (1.31-27.90)]. Except for BCS, IMI caused by non-aureus staphylococci was associated with the same risk factors as IMI caused by any pathogen. No access to feed and water immediately after milking [OR: 2.41 (1.26-4.60)], higher parity [OR: 3.60 (1.20-10.82)] and tick infestation [OR: 2.42 (1.02-5.71)] were risk factors for quarters being blind. In conclusion, replacement of old cows, prevention of teat injuries/lesions, drying teats with 1 towel per cow before milking, improving fertility in order to shorten the lactation period, allowing (restricted) suckling, access to feed and water immediately after milking, and improving tick control could improve udder health in Jimma. Copyright © 2015 Elsevier B.V. All rights reserved.
Condas, Larissa A Z; De Buck, Jeroen; Nobrega, Diego B; Carson, Domonique A; Roy, Jean-Philippe; Keefe, Greg P; DeVries, Trevor J; Middleton, John R; Dufour, Simon; Barkema, Herman W
2017-07-01
The effect of non-aureus staphylococci (NAS) in bovine mammary health is controversial. Overall, NAS intramammary infections (IMI) increase somatic cell count (SCC), with an effect categorized as mild, mostly causing subclinical or mild to moderate clinical mastitis. However, based on recent studies, specific NAS may affect the udder more severely. Some of these apparent discrepancies could be attributed to the large number of species that compose the NAS group. The objectives of this study were to determine (1) the SCC of quarters infected by individual NAS species compared with NAS as a group, culture-negative, and major pathogen-infected quarters; (2) the distribution of NAS species isolated from quarters with low SCC (<200,000 cells/mL) and high SCC (≥200,000 cells/mL), and clinical mastitis; and (3) the prevalence of NAS species across quarters with low and high SCC. A total of 5,507 NAS isolates, 3,561 from low SCC quarters, 1,873 from high SCC quarters, and 73 from clinical mastitis cases, were obtained from the National Cohort of Dairy Farms of the Canadian Bovine Mastitis Research Network. Of quarters with low SCC, high SCC, or clinical mastitis, 7.6, 18.5, and 4.3% were NAS positive, respectively. The effect of NAS IMI on SCC was estimated using mixed-effect linear regression; prevalence of NAS IMI was estimated using Bayesian analyses. Mean SCC of NAS-positive quarters was 70,000 cells/mL, which was higher than culture-negative quarters (32,000 cells/mL) and lower than major pathogen-positive quarters (129,000 to 183,000 cells/mL). Compared with other NAS species, SCC was highest in quarters positive for Staphylococcus capitis, Staphylococcus gallinarum, Staphylococcus hyicus, Staphylococcus agnetis, or Staphylococcus simulans. In NAS-positive quarters, Staphylococcus xylosus (12.6%), Staphylococcus cohnii (3.1%), and Staphylococcus equorum (0.6%) were more frequently isolated from quarters with low SCC than other NAS species, whereas Staphylococcus sciuri (14%) was most frequently isolated from clinical mastitis cases. Finally, in NAS-positive quarters, Staphylococcus chromogenes, S. simulans, Staphylococcus epidermidis, and Staphylococcus haemolyticus were isolated with similar frequency from among low SCC and high SCC quarters and clinical mastitis cases. Staphylococcus chromogenes, S. simulans, S. xylosus, S. haemolyticus, S. epidermidis, S. agnetis, Staphylococcus arlettae, S. capitis, S. gallinarum, S. sciuri, and Staphylococcus warneri were more prevalent in high than in low SCC quarters. Because the NAS are a large, heterogeneous group, considering them as a single group rather than at the species, or even subspecies level, has undoubtedly contributed to apparent discrepancies among studies as to their distribution and importance in IMI and mastitis. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.
Satellite Surveillance: Domestic Issues
2010-02-01
overflights or of covert agents . Satellite imagery undergirded U.S. strategic planning for a quarter century and a series of arms control agreements...as the executive agent of what it termed a new Domestic Applications Office (DAO). This recommendation was based on the premise that “DHS was...departments for creating and maintaining geospatial information to support homeland security. In May 2007, the DNI designated DHS as the executive agent and
Joint Force Quarterly. Number 5, Summer 1994
1994-07-01
terms of a matrix and have set it up to achieve things that matrix organizations facilitate. Matrices compel interaction across organizations; they...provide more joint, synergistic solutions to military problems. One primary result of this interaction between the assess- ment process and JROC is the...the Contingency Tactical Air Control Auto- mated Planning System (CTAPS) are both single-host computer sys- tems that do not support interactive data
ERIC Educational Resources Information Center
Rusch, Frank R.; Loomis, Frederick D.
2005-01-01
During the past quarter century, federal legislation has resulted in fundamental changes in the way youth with special needs are educated. Despite legal mandates and substantial funding support, only minimal progress has been made in the rate at which exceptional children progress through school to the world of work. During the past 30 years,…
Life Aboard a Soviet Destroyer and a Soviet Submarine
1983-09-01
psychological, political, and technological), ship design and weaponry, habitability (living quarters, diet), fleet support, damage control, and repair ...training and written exams. We then asked to transfer to Vladivostok tc participate in a long -term deployment that would combine training with a...of ship functions, including exercise and even party-political 22 work. We resumed the morning workout with Borodin as the tapes played. "The
Report on the Domestic Natural Disaster Health Workforce
2011-11-30
DEMPS volunteers are required to review and ensure that their information in the DEMPs database is current and complete on a quarterly basis. Retiring...emergency and critical-care nurses; and (3) paramedics. • Uses a pilot case study focusing on a theoretical major earthquake scenario in the ... on the three core occupational sub- groups. • Incorporates feedback from a multi-stakeholder conference. This landscape analysis supports
Who's Afraid of the Big Bad Core? The Common Core Standards and Out-of-School Time Programs
ERIC Educational Resources Information Center
Marten, Suzanne; Hill, Sara; Lawrence, Anne
2014-01-01
The Robert Bowne Foundation for out-of-school time (OST) supports the development of quality programs that offer literacy education in the out-of-school hours to children and youth of New York City, especially young people from disadvantaged communities. The foundation's networking meetings, now in their 10th year, offer quarterly forums in which…
The Philippine Response to Terrorism: The Abu Sayyaf Group
2004-12-01
1 David Tucker, “Responding to Terrorism,” The Washington Quarterly 21 (Winter 1998): 103. 2 Ibid., 103. 3 Angel Rabasa...charismatic leader Janjalani, and his trusted deputy, Edwin Angeles . The reports of the military and police about their successes against the ASG gave...measures 7. Promotion of Christian and Muslim solidarity 8. Vigilance against the movement of terrorists and their supporters, equipment, weapons and
Policy Options for University of California Budgeting. Research & Occasional Paper Series: CSHE.5.11
ERIC Educational Resources Information Center
Young, Charles E.
2011-01-01
Within a quarter century after the end of World War II (1945-1970), largely because of the support and investment it received from the State, the University of California had changed from two modest-size general campuses (Berkeley and Los Angeles) and the medical campus in San Francisco (UCSF), to a system of eight general campuses. California was…