Sample records for engineering unit eu

  1. Advanced Stirling Radioisotope Generator Engineering Unit 2 (ASRG EU2) Final Assembly

    NASA Technical Reports Server (NTRS)

    Oriti, Salvatore M.

    2015-01-01

    NASA Glenn Research Center (GRC) has recently completed the assembly of a unique Stirling generator test article for laboratory experimentation. Under the Advanced Stirling Radioisotope Generator (ASRG) flight development contract, NASA GRC initiated a task to design and fabricate a flight-like generator for in-house testing. This test article was given the name ASRG Engineering Unit 2 (EU2) as it was effectively the second engineering unit to be built within the ASRG project. The intent of the test article was to duplicate Lockheed Martin's qualification unit ASRG design as much as possible to enable system-level tests not previously possible at GRC. After the cancellation of the ASRG flight development project, the decision was made to continue the EU2 build, and make use of a portion of the hardware from the flight development project. GRC and Lockheed Martin engineers collaborated to develop assembly procedures, leveraging the valuable knowledge gathered by Lockheed Martin during the ASRG development contract. The ASRG EU2 was then assembled per these procedures at GRC with Lockheed Martin engineers on site. The assembly was completed in August 2014. This paper details the components that were used for the assembly, and the assembly process itself.

  2. Advanced Stirling Radioisotope Generator Engineering Unit 2 Anomaly Investigation

    NASA Technical Reports Server (NTRS)

    Lewandowski, Edward J.; Dobbs, Michael W.; Oriti, Salvatore M.

    2018-01-01

    The Advanced Stirling Radioisotope Generator (ASRG) Engineering Unit 2 (EU2) is the highest fidelity electrically heated Stirling radioisotope generator built to date. NASA Glenn Research Center completed the assembly of the ASRG EU2 in September 2014 using hardware from the now cancelled ASRG flight development project. The ASRG EU2 integrated the first pair of Sunpower's Advanced Stirling Convertors (ASC-E3 #1 and #2) in an aluminum generator housing with Lockheed Martin's (LM's) Engineering Development Unit (EDU) 4 controller. After just 179 hr of EU2 generator operation, the first power fluctuation occurred on ASC-E3 #1. The first power fluctuation occurred 175 hr later on ASC-E3 #2. Over time, the power fluctuations became more frequent on both convertors and larger in magnitude. Eventually the EU2 was shut down in January 2015. An anomaly investigation was chartered to determine root cause of the power fluctuations and other anomalous observations. A team with members from Glenn, Sunpower, and LM conducted a thorough investigation of the EU2 anomalies. Findings from the EU2 disassembly identified proximate causes of the anomalous observations. Discussion of the team's assessment of the primary possible failure theories, root cause, and conclusions is provided. Recommendations are made for future Stirling generator development to address the findings from the anomaly investigation. Additional findings from the investigation are also discussed.

  3. Testing to Characterize the Advanced Stirling Radioisotope Generator Engineering Unit

    NASA Technical Reports Server (NTRS)

    Lewandowski, Edward; Schreiber, Jeffrey

    2010-01-01

    The Advanced Stirling Radioisotope Generator (ASRG), a high efficiency generator, is being considered for space missions. Lockheed Martin designed and fabricated an engineering unit (EU), the ASRG EU, under contract to the Department of Energy. This unit is currently undergoing extended operation testing at the NASA Glenn Research Center to generate performance data and validate life and reliability predictions for the generator and the Stirling convertors. It has also undergone performance tests to characterize generator operation while varying control parameters and system inputs. This paper summarizes and explains test results in the context of designing operating strategies for the generator during a space mission and notes expected differences between the EU performance and future generators.

  4. Design of a Facility to Test the Advanced Stirling Radioisotope Generator Engineering Unit

    NASA Technical Reports Server (NTRS)

    Lewandowski, Edward J.; Schreiber, Jeffrey G.; Oriti, Salvatore M.; Meer, David W.; Brace, Michael H.; Dugala, Gina

    2009-01-01

    The Advanced Stirling Radioisotope Generator (ASRG) is being considered to power deep space missions. An engineering unit, the ASRG-EU, was designed and fabricated by Lockheed Martin under contract to the Department of Energy. This unit is currently on an extended operation test at NASA Glenn Research Center to generate performance data and validate the life and reliability predictions for the generator and the Stirling convertors. A special test facility was designed and built for testing the ASRG-EU. Details of the test facility design are discussed. The facility can operate the convertors under AC bus control or with the ASRG-EU controller. It can regulate input thermal power in either a fixed temperature or fixed power mode. An enclosure circulates cooled air around the ASRG-EU to remove heat rejected from the ASRG-EU by convection. A custom monitoring and data acquisition system supports the test. Various safety features, which allow 2417 unattended operation, are discussed.

  5. Characterization of the Advanced Stirling Radioisotope Generator Engineering Unit 2

    NASA Technical Reports Server (NTRS)

    Lewandowski, Edward J.; Oriti, Salvatore M.; Schifer, Niholas A.

    2016-01-01

    Significant progress was made developing the Advanced Stirling Radioisotope Generator (ASRG) 140-W radioisotope power system. While the ASRG flight development project has ended, the hardware that was designed and built under the project is continuing to be tested to support future Stirling-based power system development. NASA Glenn Research Center recently completed the assembly of the ASRG Engineering Unit 2 (EU2). The ASRG EU2 consists of the first pair of Sunpower's Advanced Stirling Convertor E3 (ASC-E3) Stirling convertors mounted in an aluminum housing, and Lockheed Martin's Engineering Development Unit (EDU) 4 controller (a fourth-generation controller). The ASC-E3 convertors and Generator Housing Assembly (GHA) closely match the intended ASRG Qualification Unit flight design. A series of tests were conducted to characterize the EU2, its controller, and the convertors in the flight-like GHA. The GHA contained an argon cover gas for these tests. The tests included measurement of convertor, controller, and generator performance and efficiency; quantification of control authority of the controller; disturbance force measurement with varying piston phase and piston amplitude; and measurement of the effect of spacecraft direct current (DC) bus voltage on EU2 performance. The results of these tests are discussed and summarized, providing a basic understanding of EU2 characteristics and the performance and capability of the EDU 4 controller.

  6. Design of a Facility to Test the Advanced Stirling Radioisotope Generator Engineering Unit

    NASA Technical Reports Server (NTRS)

    Lewandowski, Edward J.; Schreiber, Jeffrey G.; Oriti, Salvatore M.; Meer, David W.; Brace, Michael H.; Dugala, Gina

    2010-01-01

    The Advanced Stirling Radioisotope Generator (ASRG), a high efficiency generator, is being considered for space missions. An engineering unit, the ASRG engineering unit (EU), was designed and fabricated by Lockheed Martin under contract to the Department of Energy. This unit is currently under extended operation test at the NASA Glenn Research Center (GRC) to generate performance data and validate the life and reliability predictions for the generator and the Stirling convertors. A special test facility was designed and built for the ASRG EU. This paper summarizes details of the test facility design, including the mechanical mounting, heat-rejection system, argon system, control systems, and maintenance. The effort proceeded from requirements definition through design, analysis, build, and test. Initial testing and facility performance results are discussed.

  7. Natural Convection Cooling of the Advanced Stirling Radioisotope Generator Engineering Unit

    NASA Technical Reports Server (NTRS)

    Lewandowski, Edward J.; Hill, Dennis

    2011-01-01

    After fueling and prior to launch, the Advanced Stirling Radioisotope Generator (ASRG) will be stored for a period of time then moved to the launch pad for integration with the space probe and mounting on the launch vehicle. During this time, which could be as long as 3 years, the ASRG will operate continuously with heat rejected from the housing and fins. Typically, the generator will be cooled by forced convection using fans. During some of the ground operations, maintaining forced convection may add significant complexity, so allowing natural convection may simplify operations. A test was conducted on the ASRG Engineering Unit (EU) to quantify temperatures and operating parameters with natural convection only and determine if the EU could be safely operated in such an environment. The results show that with natural convection cooling the ASRG EU Stirling convertor pressure vessel temperatures and other parameters had significant margins while the EU was operated for several days in this configuration. Additionally, an update is provided on ASRG EU testing at NASA Glenn Research Center, where the ASRG EU has operated for over 16,000 hr and underwent extensive testing.

  8. Characterization of the Advanced Stirling Radioisotope Generator EU2

    NASA Technical Reports Server (NTRS)

    Lewandowski, Edward J.; Oriti, Salvatore M.; Schifer, Nicholas A.

    2015-01-01

    Significant progress was made developing the Advanced Stirling Radioisotope Generator (ASRG), a 140-watt radioisotope power system. While the ASRG flight development project has ended, the hardware that was designed and built under the project is continuing to be tested to support future Stirling-based power system development. NASA GRC recently completed the assembly of the ASRG Engineering Unit 2 (EU2). The ASRG EU2 consists of the first pair of Sunpower's ASC-E3 Stirling convertors mounted in an aluminum housing, and Lockheed Martin's Engineering Development Unit (EDU) 4 controller (a fourth generation controller). The ASC-E3 convertors and Generator Housing Assembly (GHA) closely match the intended ASRG Qualification Unit flight design. A series of tests were conducted to characterize the EU2, its controller, and the convertors in the flight-like GHA. The GHA contained an argon cover gas for these tests. The tests included: measurement of convertor, controller, and generator performance and efficiency, quantification of control authority of the controller, disturbance force measurement with varying piston phase and piston amplitude, and measurement of the effect of spacecraft DC bus voltage on EU2 performance. The results of these tests are discussed and summarized, providing a basic understanding of EU2 characteristics and the performance and capability of the EDU 4 controller.

  9. Testing of the Advanced Stirling Radioisotope Generator Engineering Unit at NASA Glenn Research Center

    NASA Technical Reports Server (NTRS)

    Lewandowski, Edward J.

    2013-01-01

    The Advanced Stirling Radioisotope Generator (ASRG) is a high-efficiency generator being developed for potential use on a Discovery 12 space mission. Lockheed Martin designed and fabricated the ASRG Engineering Unit (EU) under contract to the Department of Energy. This unit was delivered to NASA Glenn Research Center in 2008 and has been undergoing extended operation testing to generate long-term performance data for an integrated system. It has also been used for tests to characterize generator operation while varying control parameters and system inputs, both when controlled with an alternating current (AC) bus and with a digital controller. The ASRG EU currently has over 27,000 hours of operation. This paper summarizes all of the tests that have been conducted on the ASRG EU over the past 3 years and provides an overview of the test results and what was learned.

  10. Advanced Stirling Radioisotope Generator EU2 Anomaly Investigation

    NASA Technical Reports Server (NTRS)

    Lewandowski, Edward J.; Dobbs, Michael W.; Oriti, Salvatore M.

    2016-01-01

    The Advanced Stirling Radioisotope Generator (ASRG) Engineering Unit 2 (EU2) is the highest fidelity electrically-heated Stirling radioisotope generator built to date. NASA Glenn Research Center (GRC) completed the assembly of the ASRG EU2 in September, 2014 using hardware from the now cancelled ASRG flight development project. The ASRG EU2 integrated the first pair of Sunpower's ASC-E3 Stirling convertors (ASC-E3 #1 and #2) in an aluminum generator housing with Lockheed Martin's Engineering Development Unit (EDU) 4 controller. After just 179 hours of EU2 generator operation, the first power fluctuation occurred on ASC-E3 #1. The first power fluctuation occurred 175 hours later on ASC-E3 #2. Over time, the power fluctuations became more frequent on both convertors and larger in magnitude. Eventually the EU2 was shut down in January, 2015. An anomaly investigation was chartered to determine root cause of the power fluctuations and other anomalous observations. A team with members from GRC, Sunpower, and Lockheed Martin conducted a thorough investigation of the EU2 anomalies. Findings from the EU2 disassembly identified proximate causes of the anomalous observations. Discussion of the team's assessment of the primary possible failure theories, root cause, and conclusions is provided. Recommendations are made for future Stirling generator development to address the findings from the anomaly investigation. Additional findings from the investigation are also discussed.

  11. Recent Stirling Conversion Technology Developments and Operational Measurements

    NASA Technical Reports Server (NTRS)

    Oriti, Salvatore; Schifer, Nicholas

    2009-01-01

    Under contract to the Department of Energy (DOE), Lockheed Martin Space Systems Company (LMSSC) has been developing the Advanced Stirling Radioisotope Generator (ASRG). The use of Stirling technology introduces a four-fold increase in conversion efficiency over Radioisotope Thermoelectric Generators (RTGs), and thus the ASRG in an attractive power system option for future science missions. In August of 2008, the ASRG engineering unit (EU) was delivered to NASA Glenn Research Center (GRC). The engineering unit design resembles that of a flight unit, with the exception of electrical heating in place of a radioisotope source. Prior to delivery, GRC personnel prepared a test station continuous, unattended operation of the engineering unit. This test station is capable of autonomously monitoring the unit's safe operation and recording. , .. , .... performance data. Generator parameters recorded include temperatures, electrical power output, and thelmal power input. Convertor specific parameters are also recorded such as alternator voltage, current, piston amplitude, and frequency. Since November 2008, the ASRG EU has accumulated over 4,000 hours of operation. Initial operation was conducted using the AC bus control method in lieu of the LMSSC active power factor connecting controller. Operation on the LMSSC controller began in February 2009. This paper discusses the entirety of ASRG EU operation thus far, as well as baseline performance data at GRC and LMSSC, and comparison of performance using each control method.

  12. Conversion from Engineering Units to Telemetry Counts on Dryden Flight Simulators

    NASA Technical Reports Server (NTRS)

    Fantini, Jay A.

    1998-01-01

    Dryden real-time flight simulators encompass the simulation of pulse code modulation (PCM) telemetry signals. This paper presents a new method whereby the calibration polynomial (from first to sixth order), representing the conversion from counts to engineering units (EU), is numerically inverted in real time. The result is less than one-count error for valid EU inputs. The Newton-Raphson method is used to numerically invert the polynomial. A reverse linear interpolation between the EU limits is used to obtain an initial value for the desired telemetry count. The method presented here is not new. What is new is how classical numerical techniques are optimized to take advantage of modem computer power to perform the desired calculations in real time. This technique makes the method simple to understand and implement. There are no interpolation tables to store in memory as in traditional methods. The NASA F-15 simulation converts and transmits over 1000 parameters at 80 times/sec. This paper presents algorithm development, FORTRAN code, and performance results.

  13. CDRA-4EU Testing to Assess Increased Number of ISS Crew

    NASA Technical Reports Server (NTRS)

    Peters, Warren T.; Knox, James C.

    2017-01-01

    The International Space Station (ISS) program is investigating methods to increase carbon dioxide (CO2) removal on ISS in order to support an increased number of astronauts at a future date. The Carbon Dioxide Removal Assembly - Engineering Unit (CDRA-4EU) system at NASA Marshall Space Flight Center (MSFC) was tested at maximum fan settings to evaluate CO2 removal rate and power consumption at those settings.

  14. Previous Open Rotor Research in the US

    NASA Technical Reports Server (NTRS)

    VanZante, Dale

    2011-01-01

    Previous Open Rotor noise experience in the United States, current Open Rotor noise research in the United States and current NASA prediction methods activities were presented at a European Union (EU) X-Noise seminar. The invited attendees from EU industries, research establishments and universities discussed prospects for reducing Open Rotor noise and reviewed all technology programs, past and present, dedicated to Open Rotor engine concepts. This workshop was particularly timely because the Committee on Aviation Environmental Protection (CAEP) plans to involve Independent Experts in late 2011 in assessing the noise of future low-carbon technologies including the open rotor.

  15. The Future for Industrial Engineers: Education and Research Opportunities

    ERIC Educational Resources Information Center

    Mummolo, Giovanni

    2007-01-01

    EU graduation and the recruitment of industrial engineers (IEs) have been investigated. An increasing demand is observed for graduates in almost all industrial engineering (IE) subjects. The labour market in the EU is evolving towards the service sector even if manufacturing still represents a significant share of both IE employment and gross…

  16. Interface Engineering to Create a Strong Spin Filter Contact to Silicon

    NASA Astrophysics Data System (ADS)

    Caspers, C.; Gloskovskii, A.; Gorgoi, M.; Besson, C.; Luysberg, M.; Rushchanskii, K. Z.; Ležaić, M.; Fadley, C. S.; Drube, W.; Müller, M.

    2016-03-01

    Integrating epitaxial and ferromagnetic Europium Oxide (EuO) directly on silicon is a perfect route to enrich silicon nanotechnology with spin filter functionality. To date, the inherent chemical reactivity between EuO and Si has prevented a heteroepitaxial integration without significant contaminations of the interface with Eu silicides and Si oxides. We present a solution to this long-standing problem by applying two complementary passivation techniques for the reactive EuO/Si interface: (i) an in situ hydrogen-Si (001) passivation and (ii) the application of oxygen-protective Eu monolayers-without using any additional buffer layers. By careful chemical depth profiling of the oxide-semiconductor interface via hard x-ray photoemission spectroscopy, we show how to systematically minimize both Eu silicide and Si oxide formation to the sub-monolayer regime-and how to ultimately interface-engineer chemically clean, heteroepitaxial and ferromagnetic EuO/Si (001) in order to create a strong spin filter contact to silicon.

  17. The United States of America and scientific research.

    PubMed

    Hather, Gregory J; Haynes, Winston; Higdon, Roger; Kolker, Natali; Stewart, Elizabeth A; Arzberger, Peter; Chain, Patrick; Field, Dawn; Franza, B Robert; Lin, Biaoyang; Meyer, Folker; Ozdemir, Vural; Smith, Charles V; van Belle, Gerald; Wooley, John; Kolker, Eugene

    2010-08-16

    To gauge the current commitment to scientific research in the United States of America (US), we compared federal research funding (FRF) with the US gross domestic product (GDP) and industry research spending during the past six decades. In order to address the recent globalization of scientific research, we also focused on four key indicators of research activities: research and development (R&D) funding, total science and engineering doctoral degrees, patents, and scientific publications. We compared these indicators across three major population and economic regions: the US, the European Union (EU) and the People's Republic of China (China) over the past decade. We discovered a number of interesting trends with direct relevance for science policy. The level of US FRF has varied between 0.2% and 0.6% of the GDP during the last six decades. Since the 1960s, the US FRF contribution has fallen from twice that of industrial research funding to roughly equal. Also, in the last two decades, the portion of the US government R&D spending devoted to research has increased. Although well below the US and the EU in overall funding, the current growth rate for R&D funding in China greatly exceeds that of both. Finally, the EU currently produces more science and engineering doctoral graduates and scientific publications than the US in absolute terms, but not per capita. This study's aim is to facilitate a serious discussion of key questions by the research community and federal policy makers. In particular, our results raise two questions with respect to: a) the increasing globalization of science: "What role is the US playing now, and what role will it play in the future of international science?"; and b) the ability to produce beneficial innovations for society: "How will the US continue to foster its strengths?"

  18. Enhanced electric dipole transition in lanthanide complex with organometallic ruthenocene units.

    PubMed

    Hasegawa, Yasuchika; Sato, Nao; Hirai, Yuichi; Nakanishi, Takayuki; Kitagawa, Yuichi; Kobayashi, Atsushi; Kato, Masako; Seki, Tomohiro; Ito, Hajime; Fushimi, Koji

    2015-05-21

    Enhanced luminescence of a lanthanide complex with dynamic polarization of the excited state and molecular motion is introduced. The luminescent lanthanide complex is composed of one Eu(hfa)3 (hfa, hexafluoroacetylacetonate) and two phosphine oxide ligands with ruthenocenyl units Rc, [Eu(hfa)3(RcPO)2] (RcPO = diphenylphosphorylruthenocene). The ruthenocenyl units in the phosphine oxide ligands play an important role of switching for dynamic molecular polarization and motion in liquid media. The oxidation states of the ruthenocenyl unit (Rc(1+)/Rc(1+)) are controlled by potentiostatic polarization. Eu(III) complexes attached with bidentate phosphine oxide ligands containing ruthenocenyl units, [Eu(hfa)3(RcBPO)] (RcBPO = 1,1'-bis(diphenylphosphoryl)ruthenocene), and with bidentate phosphine oxide ligands, [Eu(hfa)3(BIPHEPO)] (BIPHEPO =1,1'-biphenyl-2,2'-diylbis(diphenylphosphine oxide), were also prepared as references. The coordination structures and electrochemical properties were analyzed using single crystal X-ray analysis, cyclic voltammetry, and absorption spectroscopy measurements. The luminescence properties were estimated using an optoelectrochemical cell. Under potentiostatic polarization, a significant enhancement of luminescence was successfully observed for [Eu(hfa)3(RcPO)2], while no spectral change was observed for [Eu(hfa)3(RcBPO)]. In this study, the remarkable enhanced luminescence phenomena of Eu(III) complex based on the dynamic molecular motion under potentiostatic polarization have been performed.

  19. Interface Engineering to Create a Strong Spin Filter Contact to Silicon

    PubMed Central

    Caspers, C.; Gloskovskii, A.; Gorgoi, M.; Besson, C.; Luysberg, M.; Rushchanskii, K. Z.; Ležaić, M.; Fadley, C. S.; Drube, W.; Müller, M.

    2016-01-01

    Integrating epitaxial and ferromagnetic Europium Oxide (EuO) directly on silicon is a perfect route to enrich silicon nanotechnology with spin filter functionality. To date, the inherent chemical reactivity between EuO and Si has prevented a heteroepitaxial integration without significant contaminations of the interface with Eu silicides and Si oxides. We present a solution to this long-standing problem by applying two complementary passivation techniques for the reactive EuO/Si interface: (i) an in situ hydrogen-Si (001) passivation and (ii) the application of oxygen-protective Eu monolayers–without using any additional buffer layers. By careful chemical depth profiling of the oxide-semiconductor interface via hard x-ray photoemission spectroscopy, we show how to systematically minimize both Eu silicide and Si oxide formation to the sub-monolayer regime–and how to ultimately interface-engineer chemically clean, heteroepitaxial and ferromagnetic EuO/Si (001) in order to create a strong spin filter contact to silicon. PMID:26975515

  20. International Implications of Labeling Foods Containing Engineered Nanomaterials.

    PubMed

    Grieger, Khara D; Hansen, Steffen Foss; Mortensen, Ninell P; Cates, Sheryl; Kowalcyk, Barbara

    2016-05-01

    To provide greater transparency and comprehensive information to consumers regarding their purchase choices, the European Parliament and the Council have mandated via Regulation 1169/2011 that foods containing engineered nanomaterials (ENMs) be labeled. This review covers the main concerns related to the use of ENMs in foods and the potential impacts that this type of food labeling might have on diverse stakeholder groups, including those outside the European Union (EU), e.g., in the United States. We also provide recommendations to stakeholders for overcoming existing challenges related to labeling foods containing ENMs. The revised EU food labeling requirements will likely result in a number of positive developments and a number of challenges for stakeholders in both EU and non-EU countries. Although labeling of foods containing ENMs will likely improve transparency, provide more information to facilitate consumer decisions, and build trust among food safety authorities and consumers, critical obstacles to the successful implementation of these labeling requirements remain, including the need for (i) harmonized information requirements or regulations between countries in different regions of the world, (ii) clarification of the regulatory definitions of the ENMs to be used for food labeling, (iii) robust techniques to detect, measure, and characterize diverse ENMs in food matrices, and (iv) clarification of the list of ENMs that may be exempt from labeling requirements, such as several food additives used for decades. We recommend that food industries and food safety authorities be more proactive in communicating with the public and consumer groups regarding the potential benefits and risks of using ENMs in foods. Efforts should be made to improve harmonization of information requirements between countries to avoid potential international trade barriers.

  1. Regulatory requirements in the good manufacturing practice production of an epithelial cell graft for ocular surface reconstruction.

    PubMed

    Sheth-Shah, Radhika; Vernon, Amanda J; Seetharaman, Shankar; Neale, Michael H; Daniels, Julie T

    2016-04-01

    In the past decade, stem cell therapy has been increasingly employed for the treatment of various diseases. Subsequently, there has been a great interest in the manufacture of stem cells under good manufacturing practice, which is required by law for their use in humans. The cells for sight Stem Cell Therapy Research Unit, based at UCL Institute of Ophthalmology, delivers somatic cell-based and tissue-engineered therapies to patients suffering from blinding eye diseases at Moorfields Eye Hospital (London, UK). The following article is based on our experience in the conception, design, construction, validation and manufacturing within a good manufacturing practice manufacturing facility based in the UK. As such the regulations can be extrapolated to the 28 members stated within the EU. However, the principles may have a broad relevance outside the EU.

  2. State-of-the-Art for Assessing Earthquake Hazards in the United States. Report 28. Recommended Accelerograms for Earthquake Ground Motions

    DTIC Science & Technology

    1992-06-01

    Rodolfo H. eu al., December 1985. Analisis de los Acelero- gramas del Terremoto del 3 de Marzo de 1985: University of Chile, Pub- lication SES I 4/1985 (199...196741975 Records: Open-File Report (unpublished). Mexico 1974 Prince, Jorge at al., February 1976 . Procesamiento de Acelerograas Obtenidos on 1974:, UNAM...engineering profession. The recent Mexican Guerrero data is a welcome exception to this generalization. 9 Calculations 24 . Few calculations were required for

  3. COST Action TU1208 - Working Group 2 - GPR surveying of pavements, bridges, tunnels and buildings; underground utility and void sensing

    NASA Astrophysics Data System (ADS)

    Pajewski, Lara; Benedetto, Andrea; Derobert, Xavier; Fontul, Simona; Govedarica, Miro; Gregoire, Colette; Loizos, Andreas; Perez-Gracia, Vega; Plati, Christina; Ristic, Aleksandar; Tosti, Fabio; Van Geem, Carl

    2017-04-01

    This work aims at presenting the main results achieved by Working Group (WG) 2 "GPR surveying of pavements, bridges, tunnels and buildings; underground utility and void sensing" of the COST (European COoperation in Science and Technology) Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar" (www.GPRadar.eu, www.cost.eu). The principal goal of the Action, started in April 2013 and ending in October 2017, is to exchange and increase scientific-technical knowledge and experience of Ground Penetrating Radar (GPR) techniques in civil engineering, whilst promoting throughout Europe the effective use of this safe non-destructive technique. The Action involves more than 300 Members from 28 COST Countries, a Cooperating State, 6 Near Neighbour Countries and 6 International Partner Countries. The most interesting achievements of WG2 include: 1. The state of the art on the use of GPR in civil engineering was composed and open issues were identified. The few existing international/national guidelines/protocols for GPR inspection in civil engineering were reviewed and discussed. Academic end-users, private companies and stakeholders presented their point of view and needs. 2. Guidelines for investigating flexible pavement by using GPR were prepared, with particular regard to layer-thickness assessment, moisture-content sensing, pavement-damage detection and classification, and other main GPR-based investigations in pavement engineering. 3. Guidelines for GPR sensing and mapping of underground utilities and voids were prepared, with a main focus on urban areas. 4. Guidelines for GPR assessment of concrete structures, with particular regard to inspections in bridges and tunnels, were prepared. 5. A report was composed, including a series of practical suggestions and very useful information to guide GPR users during building inspection. 6. WG2 Members carried out a plethora of case studies where GPR was used to survey roads, highways, airport runways, car parkings, road tunnels, underground concrete tunnels, bridges, railways, buildings. GPR was also employed to detect cables and pipes, as well as to inspect road construction materials, joints, concrete and wood. A selection of the most interesting results will be presented during the 2017 EGU GA. 7. WG2 contributed to the TU1208 Education Pack, an open-access educational package conceived to teach GPR in University courses. 8. In cooperation with the other Working Groups, WG2 organized Tutorials on Ground Penetrating Radar (Brussels, Belgium, July 2014, and London, United Kingdom, March 2015), as well as Training Schools on "Civil engineering applications of Ground Penetrating Radar" (Pisa, Italy, September 2014), "Applications of Ground Penetrating Radar in urban areas: the sensitive case of historical cities" (Cracow, Poland, May 2015), "Ground Penetrating Radar for road pavement assessment and detection of buried utilities" (London, United Kingdom, October 2015), "Applications of GPR to civil engineering and archaeology" (Valletta, Malta, January 2016), "Non-destructive testing techniques for civil engineering" (Barcelona, Spain, March 2016), and finally "Ground Penetrating Radar for the assessment of transport infrastructure" (Osijek, Croatia, March 2017). 9. In cooperation with the other Working Groups, WG2 organized a series of national events devoted to fostering the interaction with stakeholders, new potential GPR end-users, and interested citizens. During such events, participants could discover what is GPR and how this technique can be effectively used in civil engineering works as well as in different fields ("TU1208 GPR Road Show"). Acknowledgement: The Authors are deeply grateful to COST (European Cooperation in Science and Technology, www.cost.eu), for funding and supporting the COST Action TU1208 "Civil engineering applications of Ground Penetrating Radar" (www.GPRadar.eu).

  4. Advanced Stirling Radioisotope Generator Thermal Power Model in Thermal Desktop SINDA/FLUINT Analyzer

    NASA Technical Reports Server (NTRS)

    Wang, Xiao-Yen; Fabanich, William A.; Schmitz, Paul C.

    2012-01-01

    This paper presents a three-dimensional Advanced Stirling Radioisotope Generator (ASRG) thermal power model that was built using the Thermal Desktop SINDA/FLUINT thermal analyzer. The model was correlated with ASRG engineering unit (EU) test data and ASRG flight unit predictions from Lockheed Martin's Ideas TMG thermal model. ASRG performance under (1) ASC hot-end temperatures, (2) ambient temperatures, and (3) years of mission for the general purpose heat source fuel decay was predicted using this model for the flight unit. The results were compared with those reported by Lockheed Martin and showed good agreement. In addition, the model was used to study the performance of the ASRG flight unit for operations on the ground and on the surface of Titan, and the concept of using gold film to reduce thermal loss through insulation was investigated.

  5. Test Rack Development for Extended Operation of Advanced Stirling Convertors at NASA Glenn Research Center

    NASA Technical Reports Server (NTRS)

    Dugala, Gina M.

    2010-01-01

    The U.S. Department of Energy, Lockheed Martin Space Systems Company, Sunpower Inc., and NASA Glenn Research Center (GRC) have been developing an Advanced Stirling Radioisotope Generator (ASRG) for use as a power system on space science missions. This generator will make use of free-piston Stirling convertors to achieve higher conversion efficiency than with currently available alternatives. One part of NASA GRC's support of ASRG development includes extended operation testing of Advanced Stirling Convertors (ASCs) developed by Sunpower Inc. and GRC. The ASC consists of a free-piston Stirling engine integrated with a linear alternator. NASA GRC has been building test facilities to support extended operation of the ASCs for several years. Operation of the convertors in the test facility provides convertor performance data over an extended period of time. One part of the test facility is the test rack, which provides a means for data collection, convertor control, and safe operation. Over the years, the test rack requirements have changed. The initial ASC test rack utilized an alternating-current (AC) bus for convertor control; the ASRG Engineering Unit (EU) test rack can operate with AC bus control or with an ASC Control Unit (ACU). A new test rack is being developed to support extended operation of the ASC-E2s with higher standards of documentation, component selection, and assembly practices. This paper discusses the differences among the ASC, ASRG EU, and ASC-E2 test racks.

  6. The United States of America and Scientific Research

    PubMed Central

    Hather, Gregory J.; Haynes, Winston; Higdon, Roger; Kolker, Natali; Stewart, Elizabeth A.; Arzberger, Peter; Chain, Patrick; Field, Dawn; Franza, B. Robert; Lin, Biaoyang; Meyer, Folker; Ozdemir, Vural; Smith, Charles V.; van Belle, Gerald; Wooley, John; Kolker, Eugene

    2010-01-01

    To gauge the current commitment to scientific research in the United States of America (US), we compared federal research funding (FRF) with the US gross domestic product (GDP) and industry research spending during the past six decades. In order to address the recent globalization of scientific research, we also focused on four key indicators of research activities: research and development (R&D) funding, total science and engineering doctoral degrees, patents, and scientific publications. We compared these indicators across three major population and economic regions: the US, the European Union (EU) and the People's Republic of China (China) over the past decade. We discovered a number of interesting trends with direct relevance for science policy. The level of US FRF has varied between 0.2% and 0.6% of the GDP during the last six decades. Since the 1960s, the US FRF contribution has fallen from twice that of industrial research funding to roughly equal. Also, in the last two decades, the portion of the US government R&D spending devoted to research has increased. Although well below the US and the EU in overall funding, the current growth rate for R&D funding in China greatly exceeds that of both. Finally, the EU currently produces more science and engineering doctoral graduates and scientific publications than the US in absolute terms, but not per capita. This study's aim is to facilitate a serious discussion of key questions by the research community and federal policy makers. In particular, our results raise two questions with respect to: a) the increasing globalization of science: “What role is the US playing now, and what role will it play in the future of international science?”; and b) the ability to produce beneficial innovations for society: “How will the US continue to foster its strengths?” PMID:20808949

  7. Development and Validation of Shipboard Noise Exposure Data Acquisition Procedures.

    DTIC Science & Technology

    1981-11-05

    EL6 EL2B __EL7 EL3 _ EL4 - EL5 __ _ __ _ _ __ _ _ ___ _ _ IE 5 PERSONNEL ASSIGNMENT DATA LOC. MEAS.4) BILLET RATEG WEAR1 WATCHO HRS.JDAY AT LOC...Inc. Table 11-9 Sub-Areas used for Noise Level Averages Sub-Area Locations Included . - ELT-Eng. Room, Lower Level ELIB, EL2B, EL3, EL4 , EL5, EL6...Area Locations Included ERT-Engine Room ELIB, EL2B, EL3, EL4 , EL5, EL6, EL7, EUIW, EU2B, EU3, EU4, EU5, EU6, EU7, EU8, ESIW ES2, ES3, ES4, ELT, EUT

  8. DNA sensing by a Eu-binding peptide containing a proflavine unit.

    PubMed

    Ancel, Laetitia; Gateau, Christelle; Lebrun, Colette; Delangle, Pascale

    2013-01-18

    Synthesis of a lanthanide-binding peptide (LBP) for the detection of double-stranded DNA is presented. A proflavine moiety was introduced into a high affinity LBP involving two unnatural chelating amino acids in the Ln ion coordination. The Eu(3+)-LBP complex is demonstrated to bind to ct-DNA and to sensitize Eu luminescence. The DNA binding process is effectively detected via the Eu-centered luminescence thanks to the intimate coupling between the LBP scaffold and DNA intercalating unit.

  9. Spatially modulated magnetic structure of EuS due to the tetragonal domain structure of SrTiO3

    NASA Astrophysics Data System (ADS)

    Rosenberg, Aaron J.; Katmis, Ferhat; Kirtley, John R.; Gedik, Nuh; Moodera, Jagadeesh S.; Moler, Kathryn A.

    2017-12-01

    The combination of ferromagnets with topological superconductors or insulators allows for new phases of matter that support excitations such as chiral edge modes and Majorana fermions. EuS, a wide-bandgap ferromagnetic insulator with a Curie temperature around 16 K, and SrTiO3 (STO), an important substrate for engineering heterostructures, may support these phases. We present scanning superconducting quantum interference device measurements of EuS grown epitaxially on STO that reveal micron-scale variations in ferromagnetism and paramagnetism. These variations are oriented along the STO crystal axes and only change their configuration upon thermal cycling above the STO cubic-to-tetragonal structural transition temperature at 105 K, indicating that the observed magnetic features are due to coupling between EuS and the STO tetragonal structure. We speculate that the STO tetragonal distortions may strain the EuS, altering the magnetic anisotropy on a micron scale. This result demonstrates that local variation in the induced magnetic order from EuS grown on STO needs to be considered when engineering new phases of matter that require spatially homogeneous exchange.

  10. General Design Memorandum, Gulfport Harbor, Mississippi. Design Memorandum Number 1. Appendix F. Regional Impact and Financial Analysis

    DTIC Science & Technology

    1990-03-01

    District, Mobile AREA A ORK UNIT NUMBCRS Economic Analysis Sec., Planning Div. (CESAM-PD-FE) P. 0. Box 2288, Mobile , AL 36628-0001 11. CONTROLLING OPPICE...NAME AND ADDRESS It. REPORT DATE US Army Engineer District, Mobile March 1990 Plan Development Sec., Planning Div. (CESAM-PD-FP) IS. NUMBER OF PAGES P...0. Box 2288, Mobile , AL 36628-0001 114 14. MONITORING AGENCY NAMIE & AOORIESSQif EU110nt km cIOfi.IAd 011*e) VS. SECURITY CLASS. (of Wol roport

  11. 78 FR 45597 - Modification of the Harmonized Tariff Schedule of the United States for Certain Cheeses

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-29

    ... OFFICE OF THE UNITED STATES TRADE REPRESENTATIVE Modification of the Harmonized Tariff Schedule of the United States for Certain Cheeses AGENCY: Office of the United States Trade Representative. ACTION... and Romania in the EU-27, the tariff-rate quota (TRQ) allocations for certain cheeses from the EU-25...

  12. Competition between magnetism and superconductivity in Eu-based intermetallic compounds

    NASA Astrophysics Data System (ADS)

    Stavinoha, Macy; Green, Lance; Chan, Julia; Morosan, Emilia

    Eu-based intermetallic compounds present a path to discover new correlated electronic behavior in quantum materials. Reports of superconductivity, intermediate valence behavior, and heavy fermions indicate that Eu-based compounds are promising routes to study the relationship between crystallography and electronic properties. The present work is focused on EuGa4, an antiferromagnet with TN = 16 K isostructural with the tetragonal RT2M2 (R = rare earth, T = transition metal, M = metal or metalloid) family that exhibits heavy fermion behavior and unconventional superconductivity. Single crystals of the doped series (Eu1-xLax)Ga4, (Eu1-xCax)Ga4, and Eu(Ga1-xAlx)4 have been grown using the self-flux method and tested for change in unit cell volume and magnetic susceptibility. Results show that doping with Ca (isoelectronic doping) and La (hole doping) reduce TN to 12.4 K and 2.3 K, respectively, for Ca doping up to x = 0.11 and La doping up to x = 0.74 without an associated change in unit cell volume. The series Eu(Ga1-xAlx)4 has shown incommensurate-to-commensurate magnetic transitions. Future studies will aim to further decrease TN and the unit cell volume using physical pressure and chemical pressure through doping. ICAM, Gordon and Betty Moore Foundation.

  13. Europium-engineered iron oxide nanocubes with high T1 and T2 contrast abilities for MRI in living subjects

    NASA Astrophysics Data System (ADS)

    Yang, Lijiao; Zhou, Zijian; Liu, Hanyu; Wu, Changqiang; Zhang, Hui; Huang, Guoming; Ai, Hua; Gao, Jinhao

    2015-04-01

    Magnetic resonance imaging (MRI) contrast agents with both positive (T1) and negative (T2) contrast abilities are needed in clinical diagnosis for fault-free accurate detection of lesions. We report a facile synthesis of europium-engineered iron oxide (EuIO) nanocubes as T1 and T2 contrast agents for MRI in living subjects. The Eu(iii) oxide-embedded iron oxide nanoparticles significantly increase the T1 relaxivity with an enhanced positive contrast effect. EuIO nanocubes with 14 nm in diameter showed a high r1 value of 36.8 mM-1 s-1 with respect to total metal ions (Fe + Eu), which is about 3 times higher than that of Fe3O4 nanoparticles with similar size. Moreover, both r1 and r2 values of EuIO nanocubes can be tuned by varying their sizes and Eu doping ratios. After citrate coating, EuIO nanocubes can provide enhanced T1 and T2 contrast effects in small animals, particularly in the cardiac and liver regions. This work may provide an insightful strategy to design MRI contrast agents with both positive and negative contrast abilities for biomedical applications.Magnetic resonance imaging (MRI) contrast agents with both positive (T1) and negative (T2) contrast abilities are needed in clinical diagnosis for fault-free accurate detection of lesions. We report a facile synthesis of europium-engineered iron oxide (EuIO) nanocubes as T1 and T2 contrast agents for MRI in living subjects. The Eu(iii) oxide-embedded iron oxide nanoparticles significantly increase the T1 relaxivity with an enhanced positive contrast effect. EuIO nanocubes with 14 nm in diameter showed a high r1 value of 36.8 mM-1 s-1 with respect to total metal ions (Fe + Eu), which is about 3 times higher than that of Fe3O4 nanoparticles with similar size. Moreover, both r1 and r2 values of EuIO nanocubes can be tuned by varying their sizes and Eu doping ratios. After citrate coating, EuIO nanocubes can provide enhanced T1 and T2 contrast effects in small animals, particularly in the cardiac and liver regions. This work may provide an insightful strategy to design MRI contrast agents with both positive and negative contrast abilities for biomedical applications. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr00774g

  14. COST Action TU1208 - Working Group 4 - Combined use of GPR and other NDT methods & GPR applications in geosciences

    NASA Astrophysics Data System (ADS)

    Pajewski, Lara; Solla, Mercedes; Fontul, Simona

    2017-04-01

    This work aims at presenting the main results achieved by Working Group (WG) 4 "Different applications of GPR and other NDT technologies in civil engineering" of the COST (European COoperation in Science and Technology) Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar" (www.GPRadar.eu, www.cost.eu). The main objective of the Action TU1208, started in April 2013 and ending in October 2017, is to exchange and increase scientific-technical knowledge and experience of Ground Penetrating Radar (GPR) techniques in civil engineering, whilst promoting in Europe the effective use of this safe non-destructive technique. The Action involves more than 150 Institutions from 28 COST Countries, a Cooperating State, 6 Near Neighbour Countries and 6 International Partner Countries. WG4 deals with the use of GPR outside from the civil engineering area, namely in archaeological prospecting and cultural heritage diagnostics, agriculture and management of water resources, investigation of polluted industrial sites, non-destructive testing of living tree trunks, planetary exploration, demining, localization of people buried under avalanches and debris, and more. Furthermore, this WG studies the integration of GPR with other Non-Destructive Testing (NDT) methods. The most relevant achievements stemming from WG4 will be presented during the 2017 EGU GA. These are: (i) The collection of thorough information on the state-of-the-art, ongoing studies, problems and future research needs on the topics of interest for this WG; (ii) The performance of a plethora of interesting case studies in important sites all over Europe, including well-known historical places such as Stonehenge (United Kingdom), Carnuntum (Austria), the Wawel Cathedral (Cracow, Poland), the Tholos Tomb of Acharnon (Athens, Greece), the Łazienki Royal Palace (Warsaw, Poland), and more; (iii) WG4 contributed to the TU1208 Education Pack, an open educational package conceived to teach GPR in University courses. Additionally, WG4 was very active in offering training activities. In cooperation with the other WGs, the following courses were successfully organised: Training School (TS) "Civil engineering applications of Ground Penetrating Radar" (Pisa, Italy, September 2014), TS "Applications of Ground Penetrating Radar in urban areas: the sensitive case of historical cities" (Cracow, Poland, May 2015), TS "Applications of GPR to civil engineering and archaeology" (Valletta, Malta, January 2016), and TS "Non-destructive testing techniques for civil engineering" (Barcelona, Spain, March 2016). Finally, WG4 contributed to the organization of a series of national events devoted to fostering the interaction of Action Members with stakeholders, new potential GPR end-users, and interested citizens. During such events, participants could discover what is Ground Penetrating Radar (GPR) and how this technique can be effectively used in civil engineering works as well as in different fields ("TU1208 GPR Road Show"). Acknowledgement: The Authors are deeply grateful to COST (European Cooperation in Science and Technology, www.cost.eu), for funding and supporting the COST Action TU1208 "Civil engineering applications of Ground Penetrating Radar" (www.GPRadar.eu).

  15. Spatially modulated magnetic structure of EuS due to the tetragonal domain structure of SrTiO 3

    DOE PAGES

    Rosenberg, Aaron J.; Katmis, Ferhat; Kirtley, John R.; ...

    2017-12-15

    The combination of ferromagnets with topological superconductors or insulators allows for new phases of matter that support excitations such as chiral edge modes and Majorana fermions. EuS, a wide-bandgap ferromagnetic insulator with a Curie temperature around 16K, and SrTiO 3 (STO), an important substrate for engineering heterostructures, may support these phases. We present scanning superconducting quantum interference device measurements of EuS grown epitaxially on STO that reveal micron-scale variations in ferromagnetism and paramagnetism. These variations are oriented along the STO crystal axes and only change their configuration upon thermal cycling above the STO cubic-to-tetragonal structural transition temperature at 105 K,more » indicating that the observed magnetic features are due to coupling between EuS and the STO tetragonal structure. Here, we speculate that the STO tetragonal distortions may strain the EuS, altering the magnetic anisotropy on a micron scale. This result demonstrates that local variation in the induced magnetic order from EuS grown on STO needs to be considered when engineering new phases of matter that require spatially homogeneous exchange.« less

  16. Spatially modulated magnetic structure of EuS due to the tetragonal domain structure of SrTiO 3

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rosenberg, Aaron J.; Katmis, Ferhat; Kirtley, John R.

    The combination of ferromagnets with topological superconductors or insulators allows for new phases of matter that support excitations such as chiral edge modes and Majorana fermions. EuS, a wide-bandgap ferromagnetic insulator with a Curie temperature around 16K, and SrTiO 3 (STO), an important substrate for engineering heterostructures, may support these phases. We present scanning superconducting quantum interference device measurements of EuS grown epitaxially on STO that reveal micron-scale variations in ferromagnetism and paramagnetism. These variations are oriented along the STO crystal axes and only change their configuration upon thermal cycling above the STO cubic-to-tetragonal structural transition temperature at 105 K,more » indicating that the observed magnetic features are due to coupling between EuS and the STO tetragonal structure. Here, we speculate that the STO tetragonal distortions may strain the EuS, altering the magnetic anisotropy on a micron scale. This result demonstrates that local variation in the induced magnetic order from EuS grown on STO needs to be considered when engineering new phases of matter that require spatially homogeneous exchange.« less

  17. Comparison of the new Japanese legislation for expedited approval of regenerative medicine products with the existing systems in the USA and European Union.

    PubMed

    Jokura, Yoji; Yano, Kazuo; Yamato, Masayuki

    2018-02-01

    Legislation for expedited-approval pathways and programmes for drugs, biologics or medical devices has been enacted for rapid commercialization of innovative products in the United States of America (USA) and the European Union (EU). However, less innovative products are increasingly benefitting from these expedited-approval pathways, and obligations to collect and report post-marketing data on approved products are being bypassed frequently. The Japanese government recently enacted legislation for a new conditional and time-limited approval pathway dedicated to regenerative medicine products. The current study examines this new legislation and compares it with existing US and EU regulatory frameworks, with a particular focus on how it addresses the limitations of existing systems. Regulations, guidance documents and approval information were gathered from the websites of the respective authorities in the USA, the EU and Japan, and the systems were categorized through qualitative analysis. The pathways and programmes from each region were categorized into four groups, based on the requirement of pre- or post-marketing clinical data. Expedited-approval pathways in the USA and the EU provide similar qualification criteria, such as severity of target disease; however, such criteria are not specified for the new pathway in Japan. Only the Japanese pathway stipulates a time limitation on exceptional approval, requiring post-marketing study for conditional and time-limited products. Continuous improvement is necessary to solve previously addressed issues within the expedited-approval pathways and programmes and to ensure that innovative medical products are rigourously screened, but also readily available to patients in need. The time limitation of conditional approval could be a potential solution to some of these problems. Copyright © 2017 The Authors. Tissue Engineering Regenerative Medicine published by John Wiley & Sons, Ltd. Copyright © 2017 The Authors. Tissue Engineering Regenerative Medicine published by John Wiley & Sons, Ltd.

  18. The impact of the European health and safety directives on engineering in higher education

    NASA Astrophysics Data System (ADS)

    Crisp, Alan Roy

    This thesis examines the effect that six sets of Health and Safety legislation introduced in 1993 have had on working practices at the University, particularly within the Engineering Departments. The legislation, collectively known colloquially as "the six pack", had much in common with extant United Kingdom (UK) law but, because it emanated from the European Union (EU), it appears to be viewed in the UK as unduly restrictive and time consuming. Much of the thesis is therefore devoted to examining this suspicion in which the EU and its legislation is held by UK employers and employees. The thesis begins by examining the general background and recent history of the EU, before going on to look in greater detail at the development of Health and Safety legislation in particular. The area of interest is then further narrowed to look at the impact of this legislation on Higher Education Institutions by comparing recent accident statistics with those for industry and commerce. The main outcome of this section is that Higher Education has a similar accident profile by 'type' to industry and commerce and therefore would act in a similar manner when implementing the legislation. It is argued that industry and commerce can benefit from this similarity by emulating two case studies at the University where legislation is applied to some engineering equipment and procedures. These are described in detail and the point is made that safety is an approach that pervades all stages of an engineering process, commencing with the design or ordering of equipment. This is reinforced with the results of a primary survey of purchasing at similar institutions with regards to observance of current safety practices. It is concluded that suspicion of the "six pack" legislation is largely the result of overloading of those people responsible for safety by the arrival of a plethora of legislation all at once. Ironically this overloading appears to have influenced safety officers to pay attention to one part of the legislation at a time rather than take the integrated approach that was intended. This has further increased the workload with much testing and replacement of equipment taking place unnecessarily, as would be realised if all legislation were being applied simultaneously. The usefulness of this thesis therefore lies in showing that an integrated approach to Health and Safety is simply part of an overall integrated approach by the EU to increasing prosperity through responsible, sustainable economic development and is not intended to restrict productivity.

  19. 78 FR 69438 - AGOA: Trade and Investment Performance Overview; AGOA: Economic Effects of Providing Duty-Free...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-19

    ... To Promote Regional Integration and Increase Exports to the United States; EU-South Africa FTA... Integration and Increase Exports to the United States; and investigation No. 332-546, EU-South Africa FTA... integration into regional or global supply chains, and export potential to the United States under AGOA, as...

  20. Role of fuel additives on reduction of NOX emission from a diesel engine powered by camphor oil biofuel.

    PubMed

    Subramanian, Thiyagarajan; Varuvel, Edwin Geo; Ganapathy, Saravanan; Vedharaj, S; Vallinayagam, R

    2018-06-01

    The present study intends to explore the effect of the addition of fuel additives with camphor oil (CMO) on the characteristics of a twin-cylinder compression ignition (CI) engine. The lower viscosity and boiling point of CMO when compared to diesel could improve the fuel atomization, evaporation, and air/fuel mixing process. However, the lower cetane index of CMO limits its use as a drop in fuel for diesel in CI engine. In general, NO X emission increases for less viscous and low cetane (LVLC) fuels due to pronounced premixed combustion phase. To improve the ignition characteristics and decrease NO X emissions, fuel additives such as diglyme (DGE)-a cetane enhancer, cumene (CU)-an antioxidant, and eugenol (EU) and acetone (A)-bio-additives, are added 10% by volume with CMO. The engine used for the experimentation is a twin-cylinder tractor engine that runs at a constant speed of 1500 rpm. The engine was operated with diesel initially to attain warm-up condition, which facilitates the operation of neat CMO. At full load condition, brake thermal efficiency (BTE) for CMO is higher (29.6%) than that of diesel (28.1%), while NO X emission is increased by 9.4%. With DGE10 (10% DGE + 90% CMO), the ignition characteristics of CMO are improved and BTE is increased to 31.7% at full load condition. With EU10 (10% EU + 90% CMO) and A10 (10% A + 90% CMO), NO X emission is decreased by 24.6 and 17.8% when compared to diesel, while BTE is comparable to diesel. While HC and CO emission decreased for DGE10 and CU10, they increased for EU10 and A10 when compared to baseline diesel and CMO.

  1. Sensitizing Tb(III) and Eu(III) emission with triarylboron functionalized 1,3-diketonato ligands.

    PubMed

    Smith, Larissa F; Blight, Barry A; Park, Hee-Jun; Wang, Suning

    2014-08-04

    Four BMes2Ar (Mes = mesityl, Ar = phenyl or duryl) functionalized 1,3-diketonato ligands have been investigated for use in selective sensitization of Tb(III) and Eu(III) emission. These ligands have the general formula of [R1C(O)CR2C(O)R3](-) (R1 = Ph, R2 = H, R3 = p-Ph-BMes2, L1; R1 = R3 = p-Ph-BMes2, R2 = H, L2; R1 = R3 = Me, R2 = p-Ph-BMes2, L3; R1 = R3 = Me, R2 = p-duryl-BMes2, L4) and belong to class I (L1 and L2) and class II (L3 and L4), respectively. In class I, the boron unit is conjugated with the phenyl linker and the diketone backbone, while in class II, the boron unit, the linker unit, and the diketone unit are nonconjugated with a mutually orthogonal arrangement. To understand the impact of the location of the BMes2Ar unit on the electronic properties of the 1,3-diketone molecules and their ability in activating lanthanide emission, the difluoroboron chelate compounds (1-BF2 to 4-BF2) of ligands L1-L4 were synthesized and examined. The class I ligands were effective in activating Eu(III) emission, while the class II ligands were effective in activating Tb(III) emission. Four Ln(III) complexes, 1Eu, 2Eu, 3Tb, and 4Tb, based on the L1-L4 ligands, respectively, were prepared and examined. The emission quantum efficiency of 1Eu and 2Eu is low (Φ(Eu) ≤ 0.01 in THF, 0.07-0.13 in the solid state), but can be greatly enhanced by the addition of fluoride ions. In contrast, the complex 4Tb has a moderate emission efficiency (Φ(Tb) = 0.14 in THF, 0.47 in the solid state) and experiences a distinct emission quenching upon the addition of fluoride. The selective sensitization of Eu(III) and Tb(III) by L1-L4 and the distinct luminescent response of their Ln(III) complexes toward fluoride ions are caused by the distinct intraligand charge transfer transitions of the two different classes of ligands involving the BMes2 unit.

  2. The NanoSustain and NanoValid project--two new EU FP7 research initiatives to assess the unique physical-chemical and toxicological properties of engineered nanomaterials.

    PubMed

    Reuther, Rudolf

    2011-02-01

    In 2010, the EU FP NanoSustain project (247989) has been successfully launched with the objective to develop innovative solutions for the sustainable use, recycling and final treatment of engineered nanomaterials (ENMs). The same year, NanoValid (263147), a large-scale integrating EU FP7 project has been initiated and contract negotiations with the European Commission commenced, to develop new reference methods and materials applicable to the unique properties of ENMs. The paper presented will give an overview on the main objectives of these 2 new European research initiatives, on main tasks to achieve objectives, and on the impact on current standardization efforts and technical innovations.

  3. Defect Engineering by Codoping in KCaI3 :Eu2 + Single-Crystalline Scintillators

    NASA Astrophysics Data System (ADS)

    Wu, Yuntao; Li, Qi; Jones, Steven; Dun, Chaochao; Hu, Sheng; Zhuravleva, Mariya; Lindsey, Adam C.; Stand, Luis; Loyd, Matthew; Koschan, Merry; Auxier, John; Hall, Howard L.; Melcher, Charles L.

    2017-09-01

    Eu2 + -doped alkali or alkali earth iodide scintillators with energy resolutions ≤3 % at 662 keV promise the excellent discrimination ability for radioactive isotopes required for homeland-security and nuclear-nonproliferation applications. To extend their applications to x-ray imaging, such as computed tomography scans, the intense afterglow which delays the response time of such materials is an obstacle that needs to be overcome. However, a clear understanding of the origin of the afterglow and feasible solutions is still lacking. In this work, we present a combined experimental and theoretical investigation of the physical insights of codoping-based defect engineering which can reduce the afterglow effectively in KCaI3:Eu2 + single-crystal scintillators. We illustrate that Sc3 + codoping greatly suppresses the afterglow, whereas Y3 + , Gd3 + , or La3 + codoping enhances the afterglow. Meanwhile, a light yield of 57 000 photons / MeV and an energy resolution of 3.4% at 662 keV can be maintained with the appropriate concentration of Sc3 + codoping, which makes the material promising for medical-imaging applications. Through our thermoluminescence techniques and density-functional-theory calculations, we are able to identify the defect structures and understand the mechanism by which codoping affects the scintillation performance of KCaI3:Eu2 + crystals. The proposed defect-engineering strategy is further validated by achieving afterglow suppression in Mg2 + codoped KCaI3:Eu2 + single crystals.

  4. Search engine imaginary: Visions and values in the co-production of search technology and Europe.

    PubMed

    Mager, Astrid

    2017-04-01

    This article discusses the co-production of search technology and a European identity in the context of the EU data protection reform. The negotiations of the EU data protection legislation ran from 2012 until 2015 and resulted in a unified data protection legislation directly binding for all European member states. I employ a discourse analysis to examine EU policy documents and Austrian media materials related to the reform process. Using the concept 'sociotechnical imaginary', I show how a European imaginary of search engines is forming in the EU policy domain, how a European identity is constructed in the envisioned politics of control, and how national specificities contribute to the making and unmaking of a European identity. I discuss the roles that national technopolitical identities play in shaping both search technology and Europe, taking as an example Austria, a small country with a long history in data protection and a tradition of restrained technology politics.

  5. Hybrid sodium heat pipe receivers for dish/Stirling systems

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Laing, D.; Reusch, M.

    1997-12-31

    The design of a hybrid solar/gas heat pipe receiver for the SBP 9 kW dish/Stirling system using a United Stirling AB V160 Stirling engine and the results of on-sun testing in alternative and parallel mode will be reported. The receiver is designed to transfer a thermal power of 35 kW. The heat pipe operates at around 800 C, working fluid is sodium. Operational options are solar-only, gas augmented and gas-only mode. Also the design of a second generation hybrid heat pipe receiver currently developed under a EU-funded project, based on the experience gained with the first hybrid receiver, will bemore » reported. This receiver is designed for the improved SPB/L. and C.-10 kW dish/Stirling system with the reworked SOLO V161 Stirling engine.« less

  6. The United Kingdom: Issues for the United States

    DTIC Science & Technology

    2007-07-16

    of its EU partners than to the United States. For example, like other EU member states, Britain places great emphasis on multilateral... the prospects for the future of the U.S.-UK partnership, especially in the unfolding Brown era. It also describes UK views on political, security...delivery systems for its nuclear warheads since 1963. During the Cold War, the UK served as a vital base for U.S.

  7. Modeling the Impacts of EU Bioenergy Demand on the Forest Sector of the Southeast U.S.

    Treesearch

    Rafal Chudy; Robert C. Abt; Frederick W. Cubbage; Ragnar Jonsson; Jeffrey P. Prestemon

    2013-01-01

    The wood-pellet trade between the U.S. (United States) and the EU (European Union) has increased substantially recently. This research analyzes the effects of EU biomass imports from the Southeast U.S. on Southeast U.S. timber prices, inventories and production and on EU imports of feedstock. The SRTS (sub-regional timber supply model) was used to simulate market...

  8. Germany in Europe: Enduring Issues. Social Studies Grades 6-12. Update 2002.

    ERIC Educational Resources Information Center

    Blankenship, Glen; Moffitt, Louisa

    This instructional package, consisting of a text and 27 transparencies, is designed for the middle and secondary school classroom. The unit focuses on three topics: (1) "Germany in the European Union (EU)" (four lessons focusing on history of the EU, characteristics of member states, and EU governance); (2) "Economic Issues in…

  9. Observations related to the Salmonella EU layer baseline survey in the United Kingdom: follow-up of positive flocks and sensitivity issues.

    PubMed

    Carrique-Mas, J J; Breslin, M; Snow, L; Arnold, M E; Wales, A; McLaren, I; Davies, R H

    2008-11-01

    A follow-on study was carried out on 23 holdings identified as Salmonella positive in the 2004/2005 European Union (EU) baseline survey of Salmonella in laying hens. Eleven of 13 cage and 4/7 floor houses remained positive for Salmonella when the new flock was tested, and from 10/13 cage and 3/7 floor houses a Salmonella of the same serovar/phage type as found in the EU survey was isolated. There was a high correlation between the level of contamination in the houses at the time of the EU survey and in the follow-on flock. On seven occasions the house identified as positive in the EU survey was sampled after cleaning and disinfection but before a new flock was placed, and in all of them Salmonella could be isolated from the houses. The observed number of infected houses in infected holdings suggests that the holding-level prevalence in the United Kingdom would be about 21% higher than the results obtained in the EU survey.

  10. Observations related to the Salmonella EU layer baseline survey in the United Kingdom: follow-up of positive flocks and sensitivity issues

    PubMed Central

    CARRIQUE-MAS, J. J.; BRESLIN, M.; SNOW, L.; ARNOLD, M. E.; WALES, A.; McLAREN, I.; DAVIES, R. H.

    2008-01-01

    SUMMARY A follow-on study was carried out on 23 holdings identified as Salmonella positive in the 2004/2005 European Union (EU) baseline survey of Salmonella in laying hens. Eleven of 13 cage and 4/7 floor houses remained positive for Salmonella when the new flock was tested, and from 10/13 cage and 3/7 floor houses a Salmonella of the same serovar/phage type as found in the EU survey was isolated. There was a high correlation between the level of contamination in the houses at the time of the EU survey and in the follow-on flock. On seven occasions the house identified as positive in the EU survey was sampled after cleaning and disinfection but before a new flock was placed, and in all of them Salmonella could be isolated from the houses. The observed number of infected houses in infected holdings suggests that the holding-level prevalence in the United Kingdom would be about 21% higher than the results obtained in the EU survey. PMID:18177519

  11. Higher thermoelectric performance of Zintl phases (Eu0.5Yb0.5)1-xCaxMg2Bi2 by band engineering and strain fluctuation.

    PubMed

    Shuai, Jing; Geng, Huiyuan; Lan, Yucheng; Zhu, Zhuan; Wang, Chao; Liu, Zihang; Bao, Jiming; Chu, Ching-Wu; Sui, Jiehe; Ren, Zhifeng

    2016-07-19

    Complex Zintl phases, especially antimony (Sb)-based YbZn0.4Cd1.6Sb2 with figure-of-merit (ZT) of ∼1.2 at 700 K, are good candidates as thermoelectric materials because of their intrinsic "electron-crystal, phonon-glass" nature. Here, we report the rarely studied p-type bismuth (Bi)-based Zintl phases (Ca,Yb,Eu)Mg2Bi2 with a record thermoelectric performance. Phase-pure EuMg2Bi2 is successfully prepared with suppressed bipolar effect to reach ZT ∼ 1. Further partial substitution of Eu by Ca and Yb enhanced ZT to ∼1.3 for Eu0.2Yb0.2Ca0.6Mg2Bi2 at 873 K. Density-functional theory (DFT) simulation indicates the alloying has no effect on the valence band, but does affect the conduction band. Such band engineering results in good p-type thermoelectric properties with high carrier mobility. Using transmission electron microscopy, various types of strains are observed and are believed to be due to atomic mass and size fluctuations. Point defects, strain, dislocations, and nanostructures jointly contribute to phonon scattering, confirmed by the semiclassical theoretical calculations based on a modified Debye-Callaway model of lattice thermal conductivity. This work indicates Bi-based (Ca,Yb,Eu)Mg2Bi2 is better than the Sb-based Zintl phases.

  12. Engineering Education: Environmental and Chemical Engineering or Technology Curricula--A European Perspective

    ERIC Educational Resources Information Center

    Glavic, Peter; Lukman, Rebeka; Lozano, Rodrigo

    2009-01-01

    Over recent years, universities have been incorporating sustainable development (SD) into their systems, including their curricula. This article analyses the incorporation of SD into the curricula of chemical and environmental engineering or technology bachelor degrees at universities in the European Union (EU) and European Free Trade Association…

  13. Design, Qualification and Integration Testing of the High-Temperature Resistance Temperature Device for Stirling Power System

    NASA Technical Reports Server (NTRS)

    Chan, Jack; Hill, Dennis H.; Elisii, Remo; White, Jonathan R.; Lewandowski, Edward J.; Oriti, Salvatore M.

    2015-01-01

    The Advanced Stirling Radioisotope Generator (ASRG), developed from 2006 to 2013 under the joint sponsorship of the United States Department of Energy (DOE) and National Aeronautics and Space Administration (NASA) to provide a high-efficiency power system for future deep space missions, employed Sunpower Incorporated's Advanced Stirling Convertors (ASCs) with operating temperature up to 840 C. High-temperature operation was made possible by advanced heater head materials developed to increase reliability and thermal-to-mechanical conversion efficiency. During a mission, it is desirable to monitor the Stirling hot-end temperature as a measure of convertor health status and assist in making appropriate operating parameter adjustments to maintain the desired hot-end temperature as the radioisotope fuel decays. To facilitate these operations, a Resistance Temperature Device (RTD) that is capable of high-temperature, continuous long-life service was designed, developed and qualified for use in the ASRG. A thermal bridge was also implemented to reduce the RTD temperature exposure while still allowing an accurate projection of the ASC hot-end temperature. NASA integrated two flight-design RTDs on the ASCs and assembled into the high-fidelity Engineering Unit, the ASRG EU2, at Glenn Research Center (GRC) for extended operation and system characterization. This paper presents the design implementation and qualification of the RTD, and its performance characteristics and calibration in the ASRG EU2 testing.

  14. A Comparative Analysis of E-Learning Policy Formulation in the European Union and the United States: Discursive Convergence and Divergence

    ERIC Educational Resources Information Center

    Erichsen, Elizabeth Roumell; Salajan, Florin D.

    2014-01-01

    This study developed a framework that compares the content and purposes of "federal" level European Union (EU) and United States (US) e-learning policy to ascertain trends, patterns, and points of convergence and divergence across the years 1994-2010. It reveals that the EU and US are applying similar rhetoric for policy framing,…

  15. COST Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar:" ongoing research activities and mid-term results

    NASA Astrophysics Data System (ADS)

    Pajewski, Lara; Benedetto, Andrea; Loizos, Andreas; Slob, Evert; Tosti, Fabio

    2015-04-01

    This work aims at presenting the ongoing activities and mid-term results of the COST (European COoperation in Science and Technology) Action TU1208 'Civil Engineering Applications of Ground Penetrating Radar.' Almost three hundreds experts are participating to the Action, from 28 COST Countries (Austria, Belgium, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Ireland, Italy, Latvia, Malta, Macedonia, The Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, United Kingdom), and from Albania, Armenia, Australia, Egypt, Hong Kong, Jordan, Israel, Philippines, Russia, Rwanda, Ukraine, and United States of America. In September 2014, TU1208 has been praised among the running Actions as 'COST Success Story' ('The Cities of Tomorrow: The Challenges of Horizon 2020,' September 17-19, 2014, Torino, IT - A COST strategic workshop on the development and needs of the European cities). The principal goal of the COST Action TU1208 is to exchange and increase scientific-technical knowledge and experience of GPR techniques in civil engineering, whilst simultaneously promoting throughout Europe the effective use of this safe and non-destructive technique in the monitoring of infrastructures and structures. Moreover, the Action is oriented to the following specific objectives and expected deliverables: (i) coordinating European scientists to highlight problems, merits and limits of current GPR systems; (ii) developing innovative protocols and guidelines, which will be published in a handbook and constitute a basis for European standards, for an effective GPR application in civil- engineering tasks; safety, economic and financial criteria will be integrated within the protocols; (iii) integrating competences for the improvement and merging of electromagnetic scattering techniques and of data- processing techniques; this will lead to a novel freeware tool for the localization of buried objects, shape-reconstruction and estimation of geophysical parameters useful for civil engineering needs; (iv) networking for the design, realization and optimization of innovative GPR equipment; (v) comparing GPR with different NDT techniques, such as ultrasonic, radiographic, liquid-penetrant, magnetic-particle, acoustic-emission and eddy-current testing; (vi) comparing GPR technology and methodology used in civil engineering with those used in other fields; (vii) promotion of a more widespread, advanced and efficient use of GPR in civil engineering; and (viii) organization of a high-level modular training program for GPR European users. Four Working Groups (WGs) carry out the research activities. WG 1 focuses on the design of innovative GPR equipment, on the building of prototypes and on the testing and optimisation of new systems. WG 2 focuses on the GPR surveying of pavement, bridges, tunnels and buildings, as well as on the sensing of underground utilities and voids. WG 3 deals with the development of electromagnetic forward and inverse scattering methods, for the characterization of GPR scenarios, as well as with data- processing algorithms for the elaboration of the data collected during GPR surveys. WG 4 works on the use of GPR in fields different from the civil engineering, as well as on the integration of GPR with other non-destructive testing techniques. Each WG includes several Projects. COST Action TU1208 is active through a range of networking tools: meetings, workshops, conferences, training schools, short-term scientific missions, dissemination activities. The Action is still open to the participation of new parties and it is possible to include, in the scientific work plan, new perspectives and activities. Scientists and scientific institutions willing to join are encouraged to contact the Chair of the Action and to follow the procedure described at http://www.cost.eu/participate/join_action. For more information on COST Action TU1208, please visit www.GPRadar.eu. Acknowledgement The Authors thank COST, for funding the Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar." References [1] L. Pajewski, A. Benedetto, X. Dérobert, A. Giannopoulos, A. Loizos, G. Manacorda, M. Marciniak, C. Plati, G. Schettini, I. Trinks, "Applications of Ground Penetrating Radar in Civil Engineering - COST Action TU1208," Proc. 7th International Workshop on Advanced Ground Penetrating Radar (IWAGPR), 2-5 July 2013, Nantes, France, pp. 1-6 (INVITED). ISBN 978-1-4799-0937-7, doi:10.1109/ IWAGPR.2013.6601528). [2] L. Pajewski, A. Benedetto, "Advanced Ground Penetrating Radar: open issues and new research opportunities in Europe," Proc. 10th European Radar Conference (EuRad), 2013 European Microwave Week (EuMW), 6-11 October 2013, Nuremberg, Germany, pp. 1847-1850. [3] 'Proceedings of the First Action's General Meeting - Rome, Italy, July 2013' 1st edition, COST Action TU1208, Aracne, L. Pajewski and A. Benedetto, Eds., Rome, Italy, July 2013, ISBN 978-88-548-6191-6, available online at www.GPRadar.eu. [4] 'Booklet of Participants and Institutions,' 1st edition, COST Action TU1208, Aracne, L. Pajewski and A. Benedetto, Eds., Rome, Italy, July 2013, ISBN 978-88-548-6192-3, available online at www.GPRadar.eu. [5] 'Proceedings of the 2014 Working Group Progress Meeting - Nantes, France, February 2014,' COST Action TU1208, Aracne, L. Pajewski and X. Derobert, Eds., Rome, Italy, May 2014, ISBN 978-88-548-7223-3, available online at www.GPRadar.eu. [6] 'Proceedings of the Second Action's General Meeting - Vienna, Austria, April-May 2014,' COST Action TU1208, Aracne, L. Pajewski and A. Benedetto, Eds., Rome, Italy, 2014, ISBN 978-88-548-7224-0. [7] 'Short Term Scientific Missions and Training Schools - Year 1,' COST Action TU1208, Aracne, L. Pajewski and M. Marciniak, Eds., Rome, Italy, 2014, ISBN 978-88-548-7225-7. [8] 'Civil Engineering Applications of Ground Penetrating Radar,' A. Benedetto and L. Pajewski Eds., Springer, July 2015, ISBN 978-3-319-04812-3 (in press). [9] 'Proceedings of the 15th International Conference on Ground Penetrating Radar - GPR2014, June 30 - July 4, 2014, Bruxelles, Belgium,' S. Lambot, A. Giannopoulos, L. Pajewski, F. De André, E. Slob, and C. Craeye, Eds., IEEE Conference Record Number: 35163, ISBN: 978-1-4799-6789-6, IEEE Part Number: CFP14538-ART, October 2014. [10] 'Near Surface Geophysics' Special Issue on 'Civil and Environmental Engineering Applications of Ground Penetrating Radar,' A. Benedetto, A. Loizos, L. Pajewski, and F. Tosti, Guest Eds., publication planned for Spring 2015. [11] IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing (JSTARS) Special Issue on 'Ground Penetrating Radar', S. Lambot, A. Giannopoulos, L. Pajewski, E. Slob, Guest Eds., publication planned for December 2015.

  16. Comparison of the new Japanese legislation for expedited approval of regenerative medicine products with the existing systems in the USA and European Union

    PubMed Central

    Jokura, Yoji; Yano, Kazuo

    2017-01-01

    Abstract Legislation for expedited‐approval pathways and programmes for drugs, biologics or medical devices has been enacted for rapid commercialization of innovative products in the United States of America (USA) and the European Union (EU). However, less innovative products are increasingly benefitting from these expedited‐approval pathways, and obligations to collect and report post‐marketing data on approved products are being bypassed frequently. The Japanese government recently enacted legislation for a new conditional and time‐limited approval pathway dedicated to regenerative medicine products. The current study examines this new legislation and compares it with existing US and EU regulatory frameworks, with a particular focus on how it addresses the limitations of existing systems. Regulations, guidance documents and approval information were gathered from the websites of the respective authorities in the USA, the EU and Japan, and the systems were categorized through qualitative analysis. The pathways and programmes from each region were categorized into four groups, based on the requirement of pre‐ or post‐marketing clinical data. Expedited‐approval pathways in the USA and the EU provide similar qualification criteria, such as severity of target disease; however, such criteria are not specified for the new pathway in Japan. Only the Japanese pathway stipulates a time limitation on exceptional approval, requiring post‐marketing study for conditional and time‐limited products. Continuous improvement is necessary to solve previously addressed issues within the expedited‐approval pathways and programmes and to ensure that innovative medical products are rigourously screened, but also readily available to patients in need. The time limitation of conditional approval could be a potential solution to some of these problems. Copyright © 2017 The Authors. Tissue Engineering Regenerative Medicine published by John Wiley & Sons, Ltd. PMID:28211195

  17. Human Resources Policies Compared: What Can the EU and the USA Learn from Each Other?

    ERIC Educational Resources Information Center

    Tome, Eduardo

    2005-01-01

    Purpose: To compare in a fruitful way the human resources (HR) policies that exist in the European Union (EU) and in the United States of America (USA). Nowadays, the world is evolving to a situation in which big economic spaces like Brazil, Russia, India, China, Japan, the EU and the USA are becoming dominant. Those spaces can learn from one…

  18. Nucleotide sequences, genetic organization, and distribution of pEU30 and pEL60 from Erwinia amylovora.

    PubMed

    Foster, Gayle C; McGhee, Gayle C; Jones, Alan L; Sundin, George W

    2004-12-01

    The nucleotide sequences, genetic organization, and distribution of plasmids pEU30 (30,314 bp) and pEL60 (60,145 bp) from the plant pathogen Erwinia amylovora are described. The newly characterized pEU30 and pEL60 plasmids inhabited strains isolated in the western United States and Lebanon, respectively. The gene content of pEU30 resembled plasmids found in plant-associated bacteria, while that of pEL60 was most similar to IncL/M plasmids inhabiting enteric bacteria.

  19. Atomic-Scale Engineering of Abrupt Interface for Direct Spin Contact of Ferromagnetic Semiconductor with Silicon

    PubMed Central

    Averyanov, Dmitry V.; Karateeva, Christina G.; Karateev, Igor A.; Tokmachev, Andrey M.; Vasiliev, Alexander L.; Zolotarev, Sergey I.; Likhachev, Igor A.; Storchak, Vyacheslav G.

    2016-01-01

    Control and manipulation of the spin of conduction electrons in industrial semiconductors such as silicon are suggested as an operating principle for a new generation of spintronic devices. Coherent injection of spin-polarized carriers into Si is a key to this novel technology. It is contingent on our ability to engineer flawless interfaces of Si with a spin injector to prevent spin-flip scattering. The unique properties of the ferromagnetic semiconductor EuO make it a prospective spin injector into silicon. Recent advances in the epitaxial integration of EuO with Si bring the manufacturing of a direct spin contact within reach. Here we employ transmission electron microscopy to study the interface EuO/Si with atomic-scale resolution. We report techniques for interface control on a submonolayer scale through surface reconstruction. Thus we prevent formation of alien phases and imperfections detrimental to spin injection. This development opens a new avenue for semiconductor spintronics. PMID:26957146

  20. Differences in the progress of the biopesticide revolution between the EU and other major crop-growing regions.

    PubMed

    Balog, Adalbert; Hartel, Tibor; Loxdale, Hugh D; Wilson, Kenneth

    2017-11-01

    The five-year value in the compound annual growth rate of the biopesticides sector is predicted to be 16% by 2017 and to produce a global market worth $US 10 billion. Despite this, several impediments occur within the EU that negatively affect biopesticide research and innovation. At present, there are fewer biopesticide-active substances registered in the EU compared with the United States, India, Brazil and China. The relatively low level of biopesticide research in the EU (6880 ISI papers) versus the United States (18 839), India (9501) and China (7875) relates to the greater complexity of EU-based biopesticide regulations compared with these other countries. In this light, it is worth noting that tensions may exist between regulators that emphasise the beneficial nature of biopesticides in environmentally friendly crop management and those that adopt a more technologically based approach dependent on a chemical-pesticide-driven model. Compared with the other aforementioned countries, far fewer biopesticide products are available in the EU market, mainly as a direct result of the severe regulatory factors present there. The extent to which this trend will continue depends largely on a range of interacting political and/or regulatory decisions that influence environmentally friendly agricultural industries. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  1. Defect Engineering in SrI 2:Eu 2+ Single Crystal Scintillators

    DOE PAGES

    Wu, Yuntao; Boatner, Lynn A.; Lindsey, Adam C.; ...

    2015-06-23

    Eu 2+-activated strontium iodide is an excellent single crystal scintillator used for gamma-ray detection and significant effort is currently focused on the development of large-scale crystal growth techniques. A new approach of molten-salt pumping or so-called melt aging was recently applied to optimize the crystal quality and scintillation performance. Nevertheless, a detailed understanding of the underlying mechanism of this technique is still lacking. The main purpose of this paper is to conduct an in-depth study of the interplay between microstructure, trap centers and scintillation efficiency after melt aging treatment. Three SrI 2:2 mol% Eu2+ single crystals with 16 mm diametermore » were grown using the Bridgman method under identical growth conditions with the exception of the melt aging time (e.g. 0, 24 and 72 hours). Using energy-dispersive X-ray spectroscopy, it is found that the matrix composition of the finished crystal after melt aging treatment approaches the stoichiometric composition. The mechanism responsible for the formation of secondary phase inclusions in melt-aged SrI 2:Eu 2+ is discussed. Simultaneous improvement in light yield, energy resolution, scintillation decay-time and afterglow is achieved in melt-aged SrI 2:Eu 2+. The correlation between performance improvement and defect structure is addressed. The results of this paper lead to a better understanding of the effects of defect engineering in control and optimization of metal halide scintillators using the melt aging technique.« less

  2. When politics meets science: What impact might Brexit have on organ donation and transplantation in the United Kingdom?

    PubMed

    Shapey, Iestyn M; Summers, Angela M; Simkin, Iain J; Augustine, Titus; van Dellen, David

    2018-06-21

    Brexit may lead to major political, societal, and financial changes-this has significant implications for a tax revenue funded healthcare system such as the United Kingdom's (UK) National Health Service. The complex relationship between European Union (EU) legislation and clinical practice of organ donation and transplantation is poorly understood. However, it is unclear what impact Brexit may have on organ donation and transplantation in the UK and EU. This work aims to describe the current legislative interactions affecting organ donation and transplantation regulation and governance within the UK and EU. We consider the potential impact of Brexit on the practical aspects of transplantation such organ-sharing networks, logistics, and the provision of health care for transplant patients when traveling to the EU from the UK and vice versa, as well as personnel, and research. Successful organ donation and transplantation practices rely on close collaboration and co-operation across Europe and throughout the United Kingdom. The continuation of such relationships, despite the proposed legislative change, will remain a vital and necessary component for the ongoing success of transplantation programs. © 2018 The Authors. Clinical Transplantation Published by John Wiley & Sons Ltd.

  3. Defining efficient enzyme-cofactor pairs for bioorthogonal profiling of protein methylation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Islam, Kabirul; Chen, Yuling; Wu, Hong

    2013-11-18

    Protein methyltransferase (PMT)-mediated posttranslational modification of histone and nonhistone substrates modulates stability, localization, and interacting partners of target proteins in diverse cellular contexts. These events play critical roles in normal biological processes and are frequently deregulated in human diseases. In the course of identifying substrates of individual PMTs, bioorthogonal profiling of protein methylation (BPPM) has demonstrated its merits. In this approach, specific PMTs are engineered to process S-adenosyl-L-methionine (SAM) analogs as cofactor surrogates and label their substrates with distinct chemical modifications for target elucidation. Despite the proof-of-concept advancement of BPPM, few efforts have been made to explore its generality. Withmore » two cancer-relevant PMTs, EuHMT1 (GLP1/KMT1D) and EuHMT2 (G9a/KMT1C), as models, we defined the key structural features of engineered PMTs and matched SAM analogs that can render the orthogonal enzyme–cofactor pairs for efficient catalysis. Here we have demonstrated that the presence of sulfonium-β-sp 2 carbon and flexible, medium-sized sulfonium-δ-substituents are crucial for SAM analogs as BPPM reagents. The bulky cofactors can be accommodated by tailoring the conserved Y1211/Y1154 residues and nearby hydrophobic cavities of EuHMT1/2. Profiling proteome-wide substrates with BPPM allowed identification of >500 targets of EuHMT1/2 with representative targets validated using native EuHMT1/2 and SAM. This finding indicates that EuHMT1/2 may regulate many cellular events previously unrecognized to be modulated by methylation. The present work, therefore, paves the way to a broader application of the BPPM technology to profile methylomes of diverse PMTs and elucidate their downstream functions.« less

  4. Luminescence study of Eu3+ doped GdVO4 nanoparticles: Concentration, particle size, and core/shell effects

    NASA Astrophysics Data System (ADS)

    Singh, N. Shanta; Ningthoujam, R. S.; Devi, L. Romila; Yaiphaba, N.; Sudarsan, V.; Singh, S. Dorendrajit; Vatsa, R. K.; Tewari, R.

    2008-11-01

    Nanoparticles of GdVO4 doped with Eu3+ and core/shell of GdVO4:Eu3+/GdVO4 are prepared by urea hydrolysis method using ethylene glycol as capping agent as well as reaction medium at 130 °C. Unit cell volume increases when GdVO4 is doped with Eu3+ indicating the substitution of Gd3+ lattice sites by Eu3+. From luminescence study, it is confirmed that there is no particle size effect on emission positions of Eu3+. Optimum luminescence intensity is found to be in 5-10 at. % Eu3+. Above these concentrations, luminescence intensity decreases due to concentration quenching effect. There is an enhancement in luminescence intensity of core/shell nanoparticles. This has been attributed to the reduction in surface inhomogenities of Eu3+ surroundings by bonding to GdVO4 shell. The lifetime for D50 level increases with annealing and core/shell formation.

  5. Taming the Bear Countering Russian Energy Dominance in Europe

    DTIC Science & Technology

    2009-07-01

    poses a question for Western leaders and the thesis for this paper: How should the US and the EU counter Russian endeavors to dominate the energy...equation. If the EU can muster the political will, however, the regional gas market can be liberalized to approach the liquidity of the oil market...market liberalization will reduce any inherent threats to new Gazprom pipelines. However, it is primarily an EU solution that the United States

  6. EU Failing FAO Challenge to Improve Global Food Security.

    PubMed

    Smyth, Stuart J; Phillips, Peter W B; Kerr, William A

    2016-07-01

    The announcement that the European Union (EU) had reached an agreement allowing Member States (MS) to ban genetically modified (GM) crops confirms that the EU has chosen to ignore the food security challenge issued to the world by the Food and Agriculture Organization of the United Nations (FAO) in 2009. The FAO suggests that agricultural biotechnology has a central role in meeting the food security challenge. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. 7 CFR Exhibit B-1 to Subpart I of... - Instructions for Preparation of Evaluation Report of Self-Help Technical Assistance Grants

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... Insert the number of equivalent units (EU) completed the first/second/third month of the quarter using steps 1, 2, and 3 of exhibit B-3. 8. Insert the number of EU's completed the second month of the quarter by using steps 1, 2, and 3 of exhibit B-3. 9. Insert the number of EU's completed the third month of...

  8. 7 CFR Exhibit B-1 to Subpart I of... - Instructions for Preparation of Evaluation Report of Self-Help Technical Assistance Grants

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    .... Insert the number of equivalent units (EU) completed the first/second/third month of the quarter using steps 1, 2, and 3 of exhibit B-3. 8. Insert the number of EU's completed the second month of the quarter by using steps 1, 2, and 3 of exhibit B-3. 9. Insert the number of EU's completed the third month of...

  9. Deep Atmosphere Ammonia Mixing Ratio at Jupiter from the Galileo Probe Mass Spectrometer

    NASA Technical Reports Server (NTRS)

    Mahaffy, P. R.; Niemann, H. B.; Demick, J. E.

    1999-01-01

    New laboratory studies employing the Engineering Unit (EU) of the Galileo Probe Mass Spectrometer (GPMS) have resulted in a substantial reduction in the previously reported upper limit on the ammonia mixing ratio derived from the GPMS experiment at Jupiter. This measurement is complicated by background ammonia contributions in the GPMS during direct atmospheric sampling produced from the preceding gas enrichment experiments. These backgrounds can be quantified with the data from the EU studies when they are carried out in a manner that duplicates the descent profile of pressure and enrichment cell loading. This background is due to the tendency of ammonia to interact strongly with the walls of the mass spectrometer and on release to contribute to the gas being directly directed into the ion source from the atmosphere through a capillary pressure reduction leak. It is evident from the GPMS and other observations that the mixing ratio of ammonia at Jupiter reaches the deep atmosphere value at substantially higher pressures than previously assumed. This is a likely explanation for the previously perceived discrepancy between ammonia values derived from ground based microwave observations and those obtained from attenuation of the Galileo Probe radio signal.

  10. EU Space Awareness: Initial implemenation

    NASA Astrophysics Data System (ADS)

    Russo, Pedro

    2015-08-01

    EU Space Awareness uses the excitement of space to attract young people into science and technology and stimulate European and global citizenship. The project will show children and teenagers the opportunities offered by space science and engineering and inspire primary-school children when their curiosity is high and their value systems are being formed. EU Space Awareness, a 3-year project, has started in March 2015 with 10 partner organisations and 15 network nodes in 17 European countries and the IAU Office of Astronomy for Development. During this talk we will give a update about the intial implementation of the project and its relevant for astronomy for development.

  11. Eu2+-Doped Sr2B2-2xSi2+3xAl2-xN8+x: A Boron-Containing Orange-Emitting Nitridosilicate with Interesting Composition-Dependent Photoluminescence Properties.

    PubMed

    Ten Kate, Otmar M; Xie, Rong-Jun; Wang, Chun-Yun; Funahashi, Shiro; Hirosaki, Naoto

    2016-11-07

    Novel Sr 2-y Eu y B 2-2x Si 2+3x Al 2-x N 8+x phosphors were investigated as a function of the boron and aluminum over silicon ratio and as a function of the Eu 2+ concentration. Samples were prepared via solid-state reaction synthesis by carefully controlling the synthesis conditions and composition. At high boron and aluminum content, that is, x = 0, a Eu 2+ 5d-4f emission is observed of which the maximum shifts from 595 nm for low Eu concentrations (y = 0.005) toward 623 nm for high Eu concentrations (y = 0.5). The samples can be excited by UV or blue light up to ∼475 nm. Substitution of [B 2 Al] 9+ units by [Si 3 N] 9+ units, increasing x up to 0.15, greatly improves the luminescence efficiency up to 46% and shows a very large redshift of the excitation bands with ∼100 nm, while the emission band shifts with ∼10 nm. The shifts are attributed to the lowering of the 5d level as a result of the decreased Eu-N distance upon substitution. Temperature-dependent measurements show that the Eu 2+ 5d-4f emission is largely thermally quenched at room temperature for x = 0 due to thermal ionization toward the conduction band, explaining the low luminescence efficiency. The lowering of the 5d level at larger values of x reduces the thermal ionization and consequently increases the thermal stability and quantum efficiency, resulting in strongly luminescent blue-to-orange conversion phosphors that are interesting for light-emitting diode applications.

  12. Tailoring the structure and thermoelectric properties of BaTiO3via Eu2+ substitution.

    PubMed

    Xiao, Xingxing; Widenmeyer, Marc; Xie, Wenjie; Zou, Tianhua; Yoon, Songhak; Scavini, Marco; Checchia, Stefano; Zhong, Zhicheng; Hansmann, Philipp; Kilper, Stefan; Kovalevsky, Andrei; Weidenkaff, Anke

    2017-05-31

    A series of Ba 1-x Eu x TiO 3-δ (0.1 ≤ x ≤ 0.9) phases with ∼40 nm particle size were synthesized via a Pechini method followed by annealing and sintering under a reducing atmosphere. The effects of Eu 2+ substitution on the BaTiO 3 crystal structure and the thermoelectric transport properties were systematically investigated. According to synchrotron X-ray diffraction data only cubic perovskite structures were observed. On the local scale below about 20 Å (equal to ∼5 unit cells) deviations from the cubic structure model (Pm3[combining macron]m) were detected by evaluation of the pair distribution function (PDF). These deviations cannot be explained by a simple symmetry breaking model like in EuTiO 3-δ . The best fit was achieved in the space group Amm2 allowing for a movement of Ti and Ba/Eu along 〈110〉 of the parent unit cell as observed for BaTiO 3 . Density functional calculations delivered an insight into the electronic structure of Ba 1-x Eu x TiO 3-δ . From the obtained density of states a significant reduction of the band gap by the presence of filled Eu 2+ 4f states at the top of the valence band was observed. The physical property measurements revealed that barium-europium titanates exhibit n-type semiconducting behavior and at high temperature the electrical conductivity strongly depended on the Eu 2+ content. Activation energies calculated from the electrical conductivity and Seebeck coefficient data indicate that at high temperatures (800 K < T < 1123 K) the conduction mechanism of Ba 1-x Eu x TiO 3-δ (0.1 ≤ x ≤ 0.9) is a polaron hopping when 0 < x ≤ 0.6 and is a thermally activated process when 0.6 < x < 1. Besides, the thermal conductivity increases with increasing Eu 2+ concentration. Due to a remarkable improvement of the power factor, Ba 0.1 Eu 0.9 TiO 3-δ showed a ZT value of 0.24 at 1123 K.

  13. Dual-Emitting UiO-66(Zr&Eu) Metal-Organic Framework Films for Ratiometric Temperature Sensing.

    PubMed

    Feng, Ji-Fei; Liu, Tian-Fu; Shi, Jianlin; Gao, Shui-Ying; Cao, Rong

    2018-06-20

    A novel dual-emitting metal-organic framework based on Zr and Eu, named as UiO-66(Zr&Eu), was built using a clever strategy based on secondary building units. With the use of polymers, the obtained UiO-66(Zr&Eu) was subsequently deposited as thin films that can be utilized as smart thermometers. The UiO-66(Zr&Eu) polymer films can be used for the detection of temperature changes in the range of 237-337 K due to the energy transfer between the lanthanide ions (Eu in clusters) and the luminescent ligands, and the relative sensitivity reaches 4.26% K -1 at 337 K. Moreover, the sensitivity can be improved to 19.67% K -1 by changing the film thickness. In addition, the temperature-sensing performance of the films is superior to that of the powders, and the sensor can be reused 3 times without loss of performance.

  14. Revealing the magnetic proximity effect in EuS/Al bilayers through superconducting tunneling spectroscopy

    NASA Astrophysics Data System (ADS)

    Strambini, E.; Golovach, V. N.; De Simoni, G.; Moodera, J. S.; Bergeret, F. S.; Giazotto, F.

    2017-10-01

    A ferromagnetic insulator in contact with a superconductor is known to induce an exchange splitting of the singularity in the Bardeen-Cooper-Schrieffer (BCS) density of states (DoS). The magnitude of the splitting is proportional to the exchange field that penetrates into the superconductor to a depth comparable with the superconducting coherence length and which ranges in magnitude from a few to a few tens of tesla. We study this magnetic proximity effect in EuS/Al bilayers and show that the domain structure of the EuS affects the positions and the line shapes of the exchange-split BCS peaks. Remarkably, a clear exchange splitting is observed even in the unmagnetized state of the EuS layer, suggesting that the domain size of the EuS is comparable with the superconducting coherence length. Upon magnetizing the EuS layer, the splitting increases while the peaks change shape. Conductance measurements as a function of bias voltage at the lowest temperatures allowed us to relate the line shape of the split BCS DoS to the characteristic domain structure in the ultrathin EuS layer. These results pave the way to engineering triplet superconducting correlations at domain walls in EuS/Al bilayers. Furthermore, the hard gap and large splitting observed in our tunneling spectroscopy measurements make EuS/Al an excellent candidate for substituting strong magnetic fields in experiments studying Majorana bound states.

  15. Bulk electronic structure of non-centrosymmetric EuTGe 3 (T=Co, Ni, Rh, Ir) studied by hard x-ray photoelectron spectroscopy

    DOE PAGES

    Utsumi, Yuki; Kasinathan, Deepa; Swatek, Przemys?aw; ...

    2018-03-15

    Non-centrosymmetric EuTGe 3 ( T = Co, Ni, Rh, and Ir) possesses magnetic Eu 2+ ions, and antiferromagnetic ordering appears at low temperatures. Transition-metal substitution leads to changes in the unit-cell volume and in the magnetic ordering. However, the magnetic ordering temperature does not scale with the volume change, and the Eu valence is expected to remain divalent. Here we study the bulk electronic structure of non-centrosymmetric Eu T Ge 3 ( T = Co, Ni, Rh, and Ir) by hard x-ray photoelectron spectroscopy. The Eu 3d core-level spectrum confirms the robust Eu 2+ valence state against the transition-metal substitutionmore » with a small contribution from Eu 3+ . The estimated Eu mean valence is around 2.1 in these compounds, as confirmed by multiplet calculations. In contrast, the Ge 2p spectrum shifts to higher binding energy upon cha nging the transition metal from 3d to 4d to 5d elements, hinting at a change in the Ge- T bonding strength. The valence bands of the different compounds are found to be well reproduced by ab initio band structure calculations.« less

  16. Bulk electronic structure of non-centrosymmetric EuTGe 3 (T=Co, Ni, Rh, Ir) studied by hard x-ray photoelectron spectroscopy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Utsumi, Yuki; Kasinathan, Deepa; Swatek, Przemys?aw

    Non-centrosymmetric EuTGe 3 ( T = Co, Ni, Rh, and Ir) possesses magnetic Eu 2+ ions, and antiferromagnetic ordering appears at low temperatures. Transition-metal substitution leads to changes in the unit-cell volume and in the magnetic ordering. However, the magnetic ordering temperature does not scale with the volume change, and the Eu valence is expected to remain divalent. Here we study the bulk electronic structure of non-centrosymmetric Eu T Ge 3 ( T = Co, Ni, Rh, and Ir) by hard x-ray photoelectron spectroscopy. The Eu 3d core-level spectrum confirms the robust Eu 2+ valence state against the transition-metal substitutionmore » with a small contribution from Eu 3+ . The estimated Eu mean valence is around 2.1 in these compounds, as confirmed by multiplet calculations. In contrast, the Ge 2p spectrum shifts to higher binding energy upon cha nging the transition metal from 3d to 4d to 5d elements, hinting at a change in the Ge- T bonding strength. The valence bands of the different compounds are found to be well reproduced by ab initio band structure calculations.« less

  17. Bulk electronic structure of non-centrosymmetric Eu T Ge3 (T =Co , Ni, Rh, Ir) studied by hard x-ray photoelectron spectroscopy

    NASA Astrophysics Data System (ADS)

    Utsumi, Yuki; Kasinathan, Deepa; Swatek, Przemysław; Bednarchuk, Oleksandr; Kaczorowski, Dariusz; Ablett, James M.; Rueff, Jean-Pascal

    2018-03-01

    Non-centrosymmetric Eu T Ge3 (T = Co, Ni, Rh, and Ir) possesses magnetic Eu2 + ions, and antiferromagnetic ordering appears at low temperatures. Transition-metal substitution leads to changes in the unit-cell volume and in the magnetic ordering. However, the magnetic ordering temperature does not scale with the volume change, and the Eu valence is expected to remain divalent. Here we study the bulk electronic structure of non-centrosymmetric Eu T Ge3 (T = Co, Ni, Rh, and Ir) by hard x-ray photoelectron spectroscopy. The Eu 3 d core-level spectrum confirms the robust Eu2 + valence state against the transition-metal substitution with a small contribution from Eu3 +. The estimated Eu mean valence is around 2.1 in these compounds, as confirmed by multiplet calculations. In contrast, the Ge 2 p spectrum shifts to higher binding energy upon changing the transition metal from 3 d to 4 d to 5 d elements, hinting at a change in the Ge-T bonding strength. The valence bands of the different compounds are found to be well reproduced by ab initio band structure calculations.

  18. Eu 3+-doped wide band gap Zn 2SnO 4 semiconductor nanoparticles: Structure and luminescence

    DOE PAGES

    Dimitrievska, Mirjana; Ivetić, Tamara B.; Litvinchuk, Alexander P.; ...

    2016-08-03

    Nanocrystalline Zn 2SnO 4 powders doped with Eu 3+ ions were synthesized via a mechanochemical solid-state reaction method followed by postannealing in air at 1200 °C. X-ray diffraction (XRD), energy-dispersive X-ray (EDX), and Raman and photoluminescence (PL) spectroscopies provide convincing evidence for the incorporation of Eu 3+ ions into the host matrix on noncentrosymmetric sites of the cubic inverse spinel lattice. Microstructural analysis shows that the crystalline grain size decreases with the addition of Eu 3+. Formation of a nanocrystalline Eu 2Sn 2O 7 secondary phase is also observed. Luminescence spectra of Eu 3+-doped samples show several emissions, including narrow-bandmore » magnetic dipole emission at 595 nm and electric dipole emission at 615 nm of the Eu 3+ ions. Excitation spectra and lifetime measurements suggest that Eu 3+ ions are incorporated at only one symmetry site. According to the crystal field theory, it is assumed that Eu 3+ ions participate at octahedral sites of Zn 2+ or Sn 4+ under a weak crystal field, rather than at the tetrahedral sites of Zn2+, because of the high octahedral stabilization energy for Eu 3+. Activation of symmetry forbidden (IR-active and silent) modes is observed in the Raman scattering spectra of both pure and doped samples, indicating a disorder of the cation sublattice of Zn 2SnO 4 nanocrystallites. These results were further supported by the first principle lattice dynamics calculations. The spinel-type Zn 2SnO 4 shows effectiveness in hosting Eu 3+ ions, which could be used as a prospective green/red emitter. As a result, this work also illustrates how sustainable and simple preparation methods could be used for effective engineering of material properties.« less

  19. The management of household hazardous waste in the United Kingdom.

    PubMed

    Slack, R J; Gronow, J R; Voulvoulis, N

    2009-01-01

    Waste legislation in the United Kingdom (UK) implements European Union (EU) Directives and Regulations. However, the term used to refer to hazardous waste generated in household or municipal situations, household hazardous waste (HHW), does not occur in UK, or EU, legislation. The EU's Hazardous Waste Directive and European Waste Catalogue are the principal legislation influencing HHW, although the waste categories described are difficult to interpret. Other legislation also have impacts on HHW definition and disposal, some of which will alter current HHW disposal practices, leading to a variety of potential consequences. This paper discusses the issues affecting the management of HHW in the UK, including the apparent absence of a HHW-specific regulatory structure. Policy and regulatory measures that influence HHW management before disposal and after disposal are considered, with particular emphasis placed on disposal to landfill.

  20. Latvia Country Analysis Brief

    EIA Publications

    2014-01-01

    Latvia, which regained its independence from Soviet Union in 1991 and joined the European Union (EU) in 2004, is not a notable energy producer or consumer. The country produced 30 trillion British thermal units (Btus) and consumed 163 trillion Btus of total energy in 2011, which places it in the bottom five among the EU countries on both measures.

  1. Synthesis and Materials Design for Heteroanion Compounds

    NASA Astrophysics Data System (ADS)

    Machida, K.

    2011-02-01

    Oxynitride phosphors, SrSi2O2N2:Eu2+ were synthesized through a conventional solid state reaction between Sr2SiO4:Eu2+ precursor and Si3N4 by using NH4Cl flux, and their luminescence properties were characterized from a viewpoint of the ionic and covalent bond natures as the "heteroanion compound" containing O2- and N3- anions. The structural framework of host lattice is constructed by covalently bonded layers of SiON3 units, suggesting that the rearrangement of O2- and N3- anions effectively takes place between isolated SiO44-anions of the Sr2SiO4:Eu2+ precursor and SiN4 units of the Si3N4 raw material. Furthermore, the layered structure consisting of (Si2O2N2)n2n- polyanions as tightly connected by Si-N-Si covalent bonds depresses the lattice vibration of Sr(Eu)-O or Si-O bond, so that the temperature quenching effect is lowered to give the intense emission for LED-based illumination lamps.

  2. Selective remediation of contaminated sites using a two-level multiphase strategy and geostatistics.

    PubMed

    Saito, Hirotaka; Goovaerts, Pierre

    2003-05-01

    Selective soil remediation aims to reduce costs by cleaning only the fraction of an exposure unit (EU) necessary to lower the average concentration below the regulatory threshold. This approach requires a prior stratification of each EU into smaller remediation units (RU) which are then selected according to various criteria. This paper presents a geostatistical framework to account for uncertainties attached to both RU and EU average concentrations in selective remediation. The selection of RUs is based on their impact on the postremediation probability for the EU average concentration to exceed the regulatory threshold, which is assessed using geostatistical stochastic simulation. Application of the technique to a set of 600 dioxin concentrations collected at Piazza Road EPA Superfund site in Missouri shows a substantial decrease in the number of RU remediated compared with single phase remediation. The lower remediation costs achieved by the new strategy are obtained to the detriment of a higher risk of false negatives, yet for this data set this risk remains below the 5% rate set by EPA region 7.

  3. COST Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar": ongoing research activities and third-year results

    NASA Astrophysics Data System (ADS)

    Pajewski, Lara; Benedetto, Andrea; Loizos, Andreas; Tosti, Fabio

    2016-04-01

    This work aims at disseminating the ongoing research activities and third-year results of the COST (European COoperation in Science and Technology) Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar." About 350 experts are participating to the Action, from 28 COST Countries (Austria, Belgium, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Ireland, Italy, Latvia, Malta, Macedonia, The Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, United Kingdom), and from Albania, Armenia, Australia, Colombia, Egypt, Hong Kong, Jordan, Israel, Philippines, Russia, Rwanda, Ukraine, and United States of America. In September 2014, TU1208 has been recognised among the running Actions as "COST Success Story" ("The Cities of Tomorrow: The Challenges of Horizon 2020," September 17-19, 2014, Torino, IT - A COST strategic workshop on the development and needs of the European cities). The principal goal of the COST Action TU1208 is to exchange and increase scientific-technical knowledge and experience of GPR techniques in civil engineering, whilst simultaneously promoting throughout Europe the effective use of this safe and non-destructive technique in the monitoring of infrastructures and structures. Moreover, the Action is oriented to the following specific objectives and expected deliverables: (i) coordinating European scientists to highlight problems, merits and limits of current GPR systems; (ii) developing innovative protocols and guidelines, which will be published in a handbook and constitute a basis for European standards, for an effective GPR application in civil- engineering tasks; safety, economic and financial criteria will be integrated within the protocols; (iii) integrating competences for the improvement and merging of electromagnetic scattering techniques and of data- processing techniques; this will lead to a novel freeware tool for the localization of buried objects, shape-reconstruction and estimation of geophysical parameters useful for civil engineering needs; (iv) networking for the design, realization and optimization of innovative GPR equipment; (v) comparing GPR with different NDT techniques, such as ultrasonic, radiographic, liquid-penetrant, magnetic-particle, acoustic-emission and eddy-current testing; (vi) comparing GPR technology and methodology used in civil engineering with those used in other fields; (vii) promotion of a more widespread, advanced and efficient use of GPR in civil engineering; and (viii) organization of a high-level modular training program for GPR European users. Four Working Groups (WGs) carry out the research activities. WG 1 focuses on the design of innovative GPR equipment, on the building of prototypes and on the testing and optimisation of new systems. WG 2 focuses on the GPR surveying of pavement, bridges, tunnels and buildings, as well as on the sensing of underground utilities and voids. WG 3 deals with the development of electromagnetic forward and inverse scattering methods, for the characterization of GPR scenarios, as well as with data-processing algorithms for the elaboration of the data collected during GPR surveys. WG 4 works on the use of GPR in fields different from the civil engineering, as well as on the integration of GPR with other non-destructive testing techniques. Each WG includes several Projects. COST Action TU1208 is active through a range of networking tools: meetings, workshops, conferences, training schools, short-term scientific missions, dissemination activities. For more information on COST Action TU1208, please visit www.GPRadar.eu and www.cost.eu. Acknowledgement The Authors wish to thank COST, for funding the COST Action TU1208 "Civil engineering applications of Ground Penetrating Radar."

  4. Synthetic biology and its regulation in the European Union.

    PubMed

    Buhk, Hans-Jörg

    2014-12-25

    The term synthetic biology is used increasingly, but without a clear definition. Most of the recent research carried out in this field is genetic engineering, as defined by current GMO-legislation in the EU. Synthetic biology has developed its own language. In vitro synthesis of DNA also carries the label synthetic biology. It is important to analyze whether present and future activities of synthetic biology are within the scope of existing EU-legislation. Copyright © 2014 Elsevier B.V. All rights reserved.

  5. Understanding and predicting the impact of extreme storms events on European coastlines: the MICORE approach

    NASA Astrophysics Data System (ADS)

    Ciavola, P.

    2009-04-01

    Both the EU and The United Nations are now taking seriously the predicted climate change scenarios of the IPCC. Of particular relevance to Integrated Coastal Zone Management is the predicted increase in the intensity and frequency of powerful storm events characterised by larger peak wind speeds and consequently larger waves. Engineering has usually been favoured in the past as the best option for disaster mitigation at the coast. However, most engineering works are constrained by economics, and a compromise is sought between the potential threat to lives and property and the resources available for design and construction. Furthermore, the design of structures is based on predicted extreme events which themselves are subject to uncertainty, especially in a rapidly changing global climate. The huge damage to the city of New Orleans by Hurricane Katrina illustrates clearly what can go wrong when the engineering design is subjected to forcing beyond its design limits and when civil evacuation and management plans fail. The proposed paper will address the issue of encouraging and facilitating exchange of information on storm impacts produced by nationally funded projects in Member States; establishing robust data management and data quality control and engaging with stakeholders and end users to optimise dissemination strategies. It will heavily rely on the information produced by the MICORE Project (FP7 contract 202798), using and enlarging the database collated by the project regarding the characteristics of extreme storm events occurred in the last 50 years. The MICORE project (www.micore.eu) will provide the knowledge necessary to assess the present day risks and to study the economic and social impact of future severe storm events. Together, these elements will have an important strategic impact on the safety of the people living in coastal areas and upon decision processes aimed at minimising the economic consequences of extreme events. The project will also investigate with stakeholders and end-users the possibilities of producing EU-wide guidelines for a viable and reliable risk mitigation strategy. One of the initial main objectives of MICORE is to produce an up-to-date data base for each partner country that includes: an historical review of storms; an inventory of data related to the forcing signals; quantification of the morphological response of coastal systems to storms and to sequences of storms; an assessment of socio-economic impact; a description of existing civil protection schemes and interventions. The MICORE project will identify indices for coastal vulnerability to erosion with an integrated EU perspective using the standardised data bases assembled for all member states. It will also recommend future data collection requirements that best serve the needs of coastal managers. Here an area of innovation in the project is the standardization in the production of vulnerability matrices for evaluation of society impact from storms.

  6. XPS and 31P NMR inquiry of Eu3+-induced structural modification in SnO-containing phosphate glass

    NASA Astrophysics Data System (ADS)

    Jiménez, José A.; Fachini, Esteban Rosim; Zhao, Chunqing

    2018-07-01

    The influence of Eu3+ doping on the structural properties of SnO-containing phosphate glass has been investigated by X-ray photoelectron spectroscopy (XPS) and 31P nuclear magnetic resonance (NMR) spectroscopy. Oxygen 1s XPS data indicates that the Eu3+ doping results in a higher concentration of non-bridging oxygens in the glass matrix, whereas 31P NMR shows an increase in the terminal phosphate chain tetrahedral units, i.e. the amount of Q1 sites with only one bridging oxygen. Accordingly, both techniques agree with a depolymerization effect induced by the Eu3+ ions. Further, XPS reveals that together with the Eu3+ doping, the presence of Sn4+ is supported while the presence of Eu2+ is also indicated. The structural changes are then indicated to be a consequence of redox chemistry between Sn2+ and Eu3+ promoting a transition of tin from Sn2+ with a role as network former to Sn4+ acting as network modifier in the glass system.

  7. Advanced Stirling Convertor Dynamic Test Approach and Results

    NASA Technical Reports Server (NTRS)

    Meer, David W.; Hill, Dennis; Ursic, Joseph J.

    2010-01-01

    The U.S. Department of Energy (DOE), Lockheed Martin Corporation (LM), and NASA Glenn Research Center (GRC) have been developing the Advanced Stirling Radioisotope Generator (ASRG) for use as a power system for space science missions. As part of the extended operation testing of this power system, the Advanced Stirling Convertors (ASC) at NASA GRC undergo a vibration test sequence intended to simulate the vibration history that an ASC would experience when used in an ASRG for a space mission. This sequence includes testing at workmanship and flight acceptance levels interspersed with periods of extended operation to simulate prefueling and post fueling. The final step in the test sequence utilizes additional testing at flight acceptance levels to simulate launch. To better replicate the acceleration profile seen by an ASC incorporated into an ASRG, the input spectra used in testing the convertors was modified based on dynamic testing of the ASRG Engineering Unit (ASRG EU) at LM. This paper outlines the overall test approach, summarizes the test results from the ASRG EU, describes the incorporation of those results into the test approach, and presents the results of applying the test approach to the ASC-1 #3 and #4 convertors. The test results include data from several accelerometers mounted on the convertors as well as the piston position and output power variables.

  8. The Development of the Market of the Production of Solar Energy in Poland and Selected EU Countries in the Years 2009-2014 - Comparative Analysis

    NASA Astrophysics Data System (ADS)

    Dorozińska, Weronika; Gawron, Maciej; Stańko, Paulina; Stępień, Natalia; Świstak, Patrycja; Ji, Han Yeon

    2016-03-01

    The paper discusses issues related to the development of solar energy production in Poland and selected EU countries in the years 2009-2014. The analysis of data concerning the production of solar energy in Poland and selected EU countries is presented as well as the strategic goals of the Union in respect the development of the `solar energy industry'. The article discusses the benefits and costs of the transformation of energy engineering and development of the production of solar energy, which is one of the most widespread and popular technologies of the production of energy from renewable resources in view of environment protection or reduction of the costs of energy consumption.

  9. Transgenic Crops and Sustainable Agriculture in the European Context

    ERIC Educational Resources Information Center

    Ponti, Luigi

    2005-01-01

    The rapid adoption of transgenic crops in the United States, Argentina, and Canada stands in strong contrast to the situation in the European Union (EU), where a de facto moratorium has been in place since 1998. This article reviews recent scientific literature relevant to the problematic introduction of transgenic crops in the EU to assess if…

  10. Genetic Discrimination: A Case for a European Legislative Response?

    PubMed

    de Paor, Aisling

    2017-04-01

    With rapid scientific and technological advances, a new genetic era is emerging. However, these advances raise ethical and legal issues, particularly genetic discrimination, that may threaten advancing science in the absence of appropriate regulation. There is currently no concrete legislative position in this area at EU level, but rather a patchwork of diverging legislative approaches amongst Member States. Genetic discrimination has been singled out as an area of reform in Europe as evidenced, for example in EU Charter of Fundamental Rights, Article 21.1 prohibiting discrimination based on ‘genetic features.’ The United Nations Convention on the Rights of Persons with Disabilities also informs this debate and may spur legislative action. From a transatlantic perspective, the United States’ federal legislation (Genetic Information Non Discrimination Act) is noteworthy. Considering scientific and technological developments, the rights at stake and the various regulatory benchmarks, this paper explores the regulation of genetic information in the EU.

  11. Flood design recipes vs. reality: can predictions for ungauged basins be trusted?

    NASA Astrophysics Data System (ADS)

    Efstratiadis, A.; Koussis, A. D.; Koutsoyiannis, D.; Mamassis, N.

    2013-12-01

    Despite the great scientific and technological advances in flood hydrology, everyday engineering practices still follow simplistic approaches, such as the rational formula and the SCS-CN method combined with the unit hydrograph theory that are easy to formally implement in ungauged areas. In general, these "recipes" have been developed many decades ago, based on field data from few experimental catchments. However, many of them have been neither updated nor validated across all hydroclimatic and geomorphological conditions. This has an obvious impact on the quality and reliability of hydrological studies, and, consequently, on the safety and cost of the related flood protection works. Preliminary results, based on historical flood data from Cyprus and Greece, indicate that a substantial revision of many aspects of flood engineering procedures is required, including the regionalization formulas as well as the modelling concepts themselves. In order to provide a consistent design framework and to ensure realistic predictions of the flood risk (a key issue of the 2007/60/EU Directive) in ungauged basins, it is necessary to rethink the current engineering practices. In this vein, the collection of reliable hydrological data would be essential for re-evaluating the existing "recipes", taking into account local peculiarities, and for updating the modelling methodologies as needed.

  12. The Effect of Eu Doping on Microstructure, Morphology and Methanal-Sensing Performance of Highly Ordered SnO2 Nanorods Array

    PubMed Central

    Zhao, Yanping; Li, Yuehua; Ren, Xingping; Gao, Fan; Zhao, Heyun

    2017-01-01

    Layered Eu-doped SnO2 ordered nanoarrays constructed by nanorods with 10 nm diameters and several hundred nanometers length were synthesized by a substrate-free hydrothermal route using alcohol and water mixed solvent of sodium stannate and sodium hydroxide at 200 °C. The Eu dopant acted as a crystal growth inhibitor to prevent the SnO2 nanorods growth up, resulting in tenuous SnO2 nanorods ordered arrays. The X-ray diffraction (XRD) revealed the tetragonal rutile-type structure with a systematic average size reduction and unit cell volume tumescence, while enhancing the residual strain as the Eu-doped content increases. The surface defects that were caused by the incorporation of Eu ions within the surface oxide matrix were observed by high-resolution transmission electron microscope (HRTEM). The results of the response properties of sensors based on the different levels of Eu-doped SnO2 layered nanoarrays demonstrated that the 0.5 at % Eu-doped SnO2 layered nanorods arrays exhibited an excellent sensing response to methanal at 278 °C. The reasons of the enhanced sensing performance were discussed from the complicated defect surface structure, the large specific surface area, and the excellent catalytic properties of Eu dopant. PMID:29168796

  13. FBIS report. Science and technology: Europe/International, March 29, 1996

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1996-03-29

    ;Partial Contents: Advanced Materials (EU Project to Improve Production in Metal Matrix Compounds Noted, Germany: Extremely Hard Carbon Coating Development, Italy: Director of CNR Metallic Materials Institute Interviewed); Aerospace (ESA Considers Delays, Reductions as Result of Budget Cuts, Italy: Space Agency`s Director on Restructuring, Future Plans); Automotive, Transportation (EU: Clean Diesel Engine Technology Research Reviewed); Biotechnology (Germany`s Problems, Successes in Biotechnology Discussed); Computers (EU Europort Parallel Computing Project Concluded, Italy: PQE 2000 Project on Massively Parallel Systems Viewed); Defense R&D (France: Future Tasks of `Brevel` Military Intelligence Drone Noted); Energy, Environment (German Scientist Tests Elimination of Phosphates); Advanced Manufacturing (France:more » Advanced Rapid Prototyping System Presented); Lasers, Sensors, Optics (France: Strategy of Cilas Laser Company Detailed); Microelectronics (France: Simulation Company to Develop Microelectronic Manufacturing Application); Nuclear R&D (France: Megajoule Laser Plan, Cooperation with Livermore Lab Noted); S&T Policy (EU Efforts to Aid Small Companies` Research Viewed); Telecommunications (France Telecom`s Way to Internet).« less

  14. Enhanced persistent red luminescence in Mn2+-doped (Mg,Zn)GeO3 by electron trap and conduction band engineering

    NASA Astrophysics Data System (ADS)

    Katayama, Yumiko; Kayumi, Tomohiro; Ueda, Jumpei; Tanabe, Setsuhisa

    2018-05-01

    The effect of Zn substitution on the persistent luminescence properties of MgGeO3:Mn2+-Ln3+ (Ln = Eu and Yb) red phosphors was investigated. The intensity of the persistent luminescence of the Eu3+ co-doped phosphors increased with increasing Zn content, whereas that of the Yb3+ co-doped samples decreased. For both series of lanthanide co-doped samples, the thermoluminescence (TL) glow peak shifted to the lower temperature side with increasing Zn content. These persistent luminescence properties were well explained in terms of lowering of the bottom of the conduction band relative to the ground state of the divalent lanthanide ions. Especially, in Eu3+ co-doped system, TL peak shifted from 520 K to 318 K by 50% Zn substitution. The persistent radiance of the (Mg0.5 Zn0.5)GeO3: Mn2+-Eu3+ sample at 1 h after ceasing UV light was 46 times stronger than that of MgGeO3:Mn2+-Eu3+, and 11 times stronger than that of ZnGa2O4: Cr3+ standard deep red persistent phosphor.

  15. Installation and Testing of ITER Integrated Modeling and Analysis Suite (IMAS) on DIII-D

    NASA Astrophysics Data System (ADS)

    Lao, L.; Kostuk, M.; Meneghini, O.; Smith, S.; Staebler, G.; Kalling, R.; Pinches, S.

    2017-10-01

    A critical objective of the ITER Integrated Modeling Program is the development of IMAS to support ITER plasma operation and research activities. An IMAS framework has been established based on the earlier work carried out within the EU. It consists of a physics data model and a workflow engine. The data model is capable of representing both simulation and experimental data and is applicable to ITER and other devices. IMAS has been successfully installed on a local DIII-D server using a flexible installer capable of managing the core data access tools (Access Layer and Data Dictionary) and optionally the Kepler workflow engine and coupling tools. A general adaptor for OMFIT (a workflow engine) is being built for adaptation of any analysis code to IMAS using a new IMAS universal access layer (UAL) interface developed from an existing OMFIT EU Integrated Tokamak Modeling UAL. Ongoing work includes development of a general adaptor for EFIT and TGLF based on this new UAL that can be readily extended for other physics codes within OMFIT. Work supported by US DOE under DE-FC02-04ER54698.

  16. Europium anomalies in plagioclase-free deep arc cumulates constrain the redox evolution of arc magmas

    NASA Astrophysics Data System (ADS)

    Tang, M.; Erdman, M.; Eldridge, G.; Lee, C. T.

    2017-12-01

    Arc lavas are generally more oxidized than mid-ocean-ridge basalts, but how arc lavas acquire their oxidized signatures remains poorly understood. Iron oxidation state in melts have been used to suggest that fluids released from subducted slab may oxidize the sub-arc mantle and produce oxidized arc magmas from the source (e.g., Carmichael, 1991; Kelley and Cottrell), but redox-sensitive trace element and Fe isotope signatures of basalts also suggest that oxidation may happen during magma differentiation (e.g., Dauphas et al., 2009; Lee et al., 2005, 2010). One potential problem, however, is that all of these studies, represent indirect constraints on the primary, pre-erupted magma oxidation state. Here, we examine the Eu systematics of primitive, deep-seated (>45-80 km) arc cumulates, which provide the most direct constraint on arc magmas before they rise into the crust. The ratio of Eu2+/Eu3+ is a function of fo2, temperature and composition. Eu2+ is more incompatible than Eu3+ except in plagioclase. Combining Eu partitioning in minerals and experimentally calibrated Eu oxybarometer (Burnham et al., 2015) allows the application of mineral Eu anomalies in constraining magma redox conditions. The cumulates are represented by garnet-bearing pyroxenites from Arizona, USA and are arc cumulates. Because they derive from depths > 60 km, plagioclase was never present during their petrogenesis, hence any Eu anomalies reflect the effects of oxygen fugacity. We find that the most primitive cumulates have negative Eu anomalies in garnet and clinopyroxene (Eu/Eu*<1), despite the fact that depths of differentiation were too high to stabilize plagioclase. We further show that garnet and clinopyroxene Eu/Eu* increases with differentiation (decreasing Mg#), consistent with Eu2+ being more incompatible than Eu3+. Based on the Eu oxybarometer calibrated by Burnham et al. (2015), the Eu deficits in the most primitive cumulate (Mg# = 77) suggest crystallization at Dlogfo2 of FMQ-1, similar to that of mid-ocean-ridge basalts. Crystal fractionation modelling shows that the increasing Eu/Eu* in the evolved cumulates require fo2 to increase by at least 2 log units as the fractionated cumulate Mg# decreases from 77 to 53. These observations suggest that the oxidized nature of arc magmas occurs during intracrustal differentiation.

  17. The Global Health Policies of the EU and its Member States: A Common Vision?

    PubMed Central

    Steurs, Lies; Van de Pas, Remco; Delputte, Sarah; Orbie, Jan

    2018-01-01

    Background: This article assesses the global health policies of the European Union (EU) and those of its individual member states. So far EU and public health scholars have paid little heed to this, despite the large budgets involved in this area. While the European Commission has attempted to define the ‘EU role in Global Health’ in 2010, member states are active in the domain of global health as well. Therefore, this article raises the question to what extent a common ‘EU’ vision on global health exists. Methods: This is examined through a comparative framing analysis of the global health policy documents of the European Commission and five EU member states (France, Germany, the United Kingdom, Belgium, and Denmark). The analysis is informed by a two-layered typology, distinguishing global health from international health and four ‘global health frames,’ namely social justice, security, investment and charity. Results: The findings show that the concept of ‘global health’ has not gained ground the same way within European policy documents. Consequently, there are also differences in how health is being framed. While the European Commission, Belgium, and Denmark clearly support a social justice frame, the global health strategies of the United Kingdom, Germany, and France put an additional focus on the security and investment frames. Conclusion: There are different understandings of global/international health as well as different framings within relevant documents of the EU and its member states. Therefore, the existence of an ‘EU’ vision on global health is questionable. Further research is needed on how this impacts on policy implementation. PMID:29764107

  18. Matching Up to the Information Society: An Evaluation of the EU, the EU Accession Countries, Switzerland and the United States. Summary

    ERIC Educational Resources Information Center

    Graafland-Essers, Irma; Cremonini, Leon; Ettedgui, Emile; Botterman, Maarten

    2003-01-01

    This report presents the current understanding of the advancement of the Information Society within the European Union and countries that are up for accession in 2004, and is based on the SIBIS (Statistical Indicators Benchmarking the Information Society) surveys and analyses per SIBIS theme and country. The report is unique in its coherent and…

  19. Matching Up to the Information Society: An Evaluation of the EU, the EU Accession Countries, Switzerland and the United States

    ERIC Educational Resources Information Center

    Graafland-Essers, Irma; Cremonini, Leon; Ettedgui, Emile; Botterman, Maarten

    2003-01-01

    This report presents the current understanding of the advancement of the Information Society within the European Union and countries that are up for accession in 2004, and is based on the SIBIS (Statistical Indicators Benchmarking the Information Society) surveys and analyses per SIBIS theme and country. The report is unique in its coherent and…

  20. Occupational fatality risks in the United States and the United Kingdom.

    PubMed

    Mendeloff, John; Staetsky, Laura

    2014-01-01

    There are very few careful studies of differences in occupational fatality rates across countries, much less studies that try to account for those differences. We compare the rate of work injury fatalities (excluding deaths due to highway motor vehicle crashes and those due to violence) identified by the US Census of Fatal Occupational Injuries in recent years with the number reported to the Health and Safety Executive in the United Kingdom (UK) and by other European Union (EU) members through Eurostat. In 2010, the fatality rate in the UK was about 1/3 the rate in the US. In construction the rate was about ¼ the US rate, a difference that had grown substantially since the 1990s. Several other EU members had rates almost as low as the UK rate. Across EU countries, lower rates were associated with high-level management attention to safety issues and to in-house preparation of "risk assessments." Although work fatality rates have declined in the US, fatality rates are much lower and have declined faster in recent years in the UK. Efforts to find out the reasons for the much better UK outcomes could be productive. © 2013 Wiley Periodicals, Inc.

  1. Rapid culture-independent microbial analysis aboard the International Space Station (ISS).

    PubMed

    Maule, Jake; Wainwright, Norm; Steele, Andrew; Monaco, Lisa; Morris, Heather; Gunter, Daniel; Damon, Michael; Wells, Mark

    2009-10-01

    A new culture-independent system for microbial monitoring, called the Lab-On-a-Chip Application Development Portable Test System (LOCAD-PTS), was operated aboard the International Space Station (ISS). LOCAD-PTS was launched to the ISS aboard Space Shuttle STS-116 on December 9, 2006, and has since been used by ISS crews to monitor endotoxin on cabin surfaces. Quantitative analysis was performed within 15 minutes, and sample return to Earth was not required. Endotoxin (a marker of Gram-negative bacteria) was distributed throughout the ISS, despite previous indications that mostbacteria on ISS surfaces were Gram-positive [corrected].Endotoxin was detected at 24 out of 42 surface areas tested and at every surface site where colony-forming units (cfu) were observed, even at levels of 4-120 bacterial cfu per 100 cm(2), which is below NASA in-flight requirements (<10,000 bacterial cfu per 100 cm(2)). Absent to low levels of endotoxin (<0.24 to 1.0 EU per 100 cm(2); defined in endotoxin units, or EU) were found on 31 surface areas, including on most panels in Node 1 and the US Lab. High to moderate levels (1.01 to 14.7 EU per 100 cm(2)) were found on 11 surface areas, including at exercise, hygiene, sleeping, and dining facilities. Endotoxin was absent from airlock surfaces, except the Extravehicular Hatch Handle (>3.78 EU per 100 cm(2)). Based upon data collected from the ISS so far, new culture-independent requirements (defined in EU) are suggested, which are verifiable in flight with LOCAD-PTS yet high enough to avoid false alarms. The suggested requirements are intended to supplement current ISS requirements (defined in cfu) and would serve a dual purpose of safeguarding crew health (internal spacecraft surfaces <20 EU per 100 cm(2)) and monitoring forward contamination during Constellation missions (surfaces periodically exposed to the external environment, including the airlock and space suits, <0.24 EU per 100 cm(2)).

  2. Rapid Culture-Independent Microbial Analysis Aboard the International Space Station (ISS)

    NASA Astrophysics Data System (ADS)

    Maule, Jake; Wainwright, Norm; Steele, Andrew; Monaco, Lisa; Morris, Heather; Gunter, Daniel; Damon, Michael; Wells, Mark

    2009-10-01

    A new culture-independent system for microbial monitoring, called the Lab-On-a-Chip Application Development Portable Test System (LOCAD-PTS), was operated aboard the International Space Station (ISS). LOCAD-PTS was launched to the ISS aboard Space Shuttle STS-116 on December 9, 2006, and has since been used by ISS crews to monitor endotoxin on cabin surfaces. Quantitative analysis was performed within 15 minutes, and sample return to Earth was not required. Endotoxin (a marker of Gram-negative bacteria and fungi) was distributed throughout the ISS, despite previous indications that most bacteria on ISS surfaces were Gram-positive. Endotoxin was detected at 24 out of 42 surface areas tested and at every surface site where colony-forming units (cfu) were observed, even at levels of 4-120 bacterial cfu per 100 cm2, which is below NASA in-flight requirements (<10,000 bacterial cfu per 100 cm2). Absent to low levels of endotoxin (<0.24 to 1.0 EU per 100 cm2; defined in endotoxin units, or EU) were found on 31 surface areas, including on most panels in Node 1 and the US Lab. High to moderate levels (1.01 to 14.7 EU per 100 cm2) were found on 11 surface areas, including at exercise, hygiene, sleeping, and dining facilities. Endotoxin was absent from airlock surfaces, except the Extravehicular Hatch Handle (>3.78 EU per 100 cm2). Based upon data collected from the ISS so far, new culture-independent requirements (defined in EU) are suggested, which are verifiable in flight with LOCAD-PTS yet high enough to avoid false alarms. The suggested requirements are intended to supplement current ISS requirements (defined in cfu) and would serve a dual purpose of safeguarding crew health (internal spacecraft surfaces <20 EU per 100 cm2) and monitoring forward contamination during Constellation missions (surfaces periodically exposed to the external environment, including the airlock and space suits, <0.24 EU per 100 cm2).

  3. Three new europium(III) methanetriacetate metal-organic frameworks: the influence of synthesis on the product topology.

    PubMed

    Cañadillas-Delgado, Laura; Fabelo, Oscar; Pasán, Jorge; Déniz, Mariadel; Martínez-Benito, Carla; Díaz-Gallifa, Pau; Martín, Tomás; Ruiz-Pérez, Catalina

    2014-02-01

    Three new metal-organic framework structures containing Eu(III) and the little explored methanetriacetate (C7H7O6(3-), mta(3-)) ligand have been synthesized. Gel synthesis yields a two-dimensional framework with the formula [Eu(mta)(H2O)3]n·2nH2O, (I), while two polymorphs of the three-dimensional framework material [Eu(mta)(H2O)]n·nH2O, (II) and (III), are obtained through hydrothermal synthesis at either 423 or 443 K. Compounds (I) and (II) are isomorphous with previously reported Gd(III) compounds, but compound (III) constitutes a new phase. Compound (I) can be described in terms of dinuclear [Eu2(H2O)4](6+) units bonded through mta(3-) ligands to form a two-dimensional framework with topology corresponding to a (6,3)-connected binodal (4(3))(4(6)6(6)8(3))-kgd net, where the dinuclear [Eu2(H2O)4](6+) units are considered as a single node. Compounds (II) and (III) have distinct three-dimensional topologies, namely a (4(12)6(3))(4(9)6(6))-nia net for (II) and a (4(10)6(5))(4(11)6(4))-K2O2; 36641 net for (III). The crystal density of (III) is greater than that of (II), consistent with the increase of temperature, and thereby autogeneous pressure, in the hydrothermal synthesis.

  4. Sharing and reusing cardiovascular anatomical models over the Web: a step towards the implementation of the virtual physiological human project.

    PubMed

    Gianni, Daniele; McKeever, Steve; Yu, Tommy; Britten, Randall; Delingette, Hervé; Frangi, Alejandro; Hunter, Peter; Smith, Nicolas

    2010-06-28

    Sharing and reusing anatomical models over the Web offers a significant opportunity to progress the investigation of cardiovascular diseases. However, the current sharing methodology suffers from the limitations of static model delivery (i.e. embedding static links to the models within Web pages) and of a disaggregated view of the model metadata produced by publications and cardiac simulations in isolation. In the context of euHeart--a research project targeting the description and representation of cardiovascular models for disease diagnosis and treatment purposes--we aim to overcome the above limitations with the introduction of euHeartDB, a Web-enabled database for anatomical models of the heart. The database implements a dynamic sharing methodology by managing data access and by tracing all applications. In addition to this, euHeartDB establishes a knowledge link with the physiome model repository by linking geometries to CellML models embedded in the simulation of cardiac behaviour. Furthermore, euHeartDB uses the exFormat--a preliminary version of the interoperable FieldML data format--to effectively promote reuse of anatomical models, and currently incorporates Continuum Mechanics, Image Analysis, Signal Processing and System Identification Graphical User Interface (CMGUI), a rendering engine, to provide three-dimensional graphical views of the models populating the database. Currently, euHeartDB stores 11 cardiac geometries developed within the euHeart project consortium.

  5. Structure and physical properties of EuTa{sub 2}O{sub 6} tungsten bronze polymorph

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kolodiazhnyi, T., E-mail: kolodiazhnyi.taras@nims.go.jp; Sakurai, H.; Vasylkiv, O.

    A tetragonal tungsten bronze (TTB) polymorph of EuTa{sub 2}O{sub 6} was prepared and analyzed. EuTa{sub 2}O{sub 6} crystallizes in the centrosymmetric Pnam space group (with unit cell: a = 12.3693, b = 12.4254, and c = 7.7228 Å) isomorphous with orthorhombic β-SrTa{sub 2}O{sub 6}. In contrast to early reports, we see no evidence of deviation from paramagnetic Curie-Weiss behavior among the Eu{sup 2+} 4f{sup 7}spins in EuTa{sub 2}O{sub 6} down to 2 K. Dielectric constant shows a broad peak at ca. 50 K with dielectric dispersion resembling diffuse phase transition. The relaxation time, however, follows a simple (non-freezing) thermally activated process with an activation energy of 92 meV and anmore » attempt frequency of f{sub 0} = 5.79 × 10{sup 12 }Hz. A thermal conductivity of EuTa{sub 2}O{sub 6} shows a low-temperature (T ≈ 30 K) “plateau” region reminiscent of a glass-like behaviour in Nb-based TTB compounds. This behaviour can be attributed to the loosely bound Eu{sup 2+} ions occupying large tricapped trigonal prismatic sites in the EuTa{sub 2}O{sub 6} structure.« less

  6. The effects of rare earth elements on an anaerobic hydrogen producing microorganism

    NASA Astrophysics Data System (ADS)

    Fujita, Y.; St Jeor, J. D.; Reed, D. W.

    2016-12-01

    Rapid growth of new energy technologies and consumer electronics is leading to increased fluxes of rare earth elements (REE), during the phases of resource extraction, product usage, recycling, and disposal. However, little is known about the impacts of these increased REE fluxes on environmental ecosystems, whether natural or engineered (e.g., biological waste treatment systems). We have been evaluating the effects of europium and yttrium on hydrogen production by an anaerobic fermenting microorganism, Sporacetigenium mesophilum, originally isolated from an anaerobic digester at a wastewater treatment plant.1 Europium and yttrium are important components of phosphors used in fluorescent lighting, and are expected to be recycled in larger quantities in the future. Also tested was the compound tributyl phosphate (TBP), a widely used complexing agent in lanthanide and actinide separations. TBP and related compounds may be used in recycling processes for REE. S. mesophilumcultures were amended with Eu at 100 ppb, 1 ppm and 10 ppm and hydrogen production was measured. While the lowest Eu concentration had minimal effect on hydrogen production compared to the no Eu control, the two higher Eu amendment levels appeared to enhance hydrogen production. TBP at 0.1 g/L completely inhibited hydrogen production. Measurements of aqueous Eu concentrations indicated that >85% of the added Eu remained soluble at all three of the Eu addition levels tested. Experiments to ascertain whether enhancement (or inhibition) occurs at even higher Eu concentrations are underway, as are corresponding experiments with yttrium. This work contributes to the assessment of the potential impacts of increased REE recycling and processing on ecosystems, and supports decision making with respect to disposal of wastewaters generated during these industrial practices. 1Chen, S., Song, L. and X. Dong. Int J. Syst. Evol. Microbiol. 56, 721-725, doi: 10.1099/ijs.0.63686-0 (2006).

  7. In-use measurement of activity, energy use, and emissions of a plug-in hybrid electric vehicle.

    PubMed

    Graver, Brandon M; Frey, H Christopher; Choi, Hyung-Wook

    2011-10-15

    Plug-in hybrid electric vehicles (PHEVs) could reduce transportation air emissions and energy use. However, a method is needed for estimating on-road emissions of PHEVs. To develop a framework for quantifying microscale energy use and emissions (EU&E), measurements were conducted on a Toyota Prius retrofitted with a plug-in battery system on eight routes. Measurements were made using the following: (1) a data logger for the hybrid control system; (2) a portable emissions measurement system; and (3) a global positioning system with barometric altimeter. Trends in EU&E are estimated based on vehicle specific power. Energy economy is quantified based on gasoline consumed by the engine and grid energy consumed by the plug-in battery. Emissions from electricity consumption are estimated based on the power generation mix. Fuel use is approximately 30% lower during plug-in battery use. Grid emissions were higher for CO₂, NO(x), SO₂, and PM compared to tailpipe emissions but lower for CO and hydrocarbons. EU&E depends on engine and plug-in battery operation. The use of two energy sources must be addressed in characterizing fuel economy; overall energy economy is 11% lower if including grid energy use than accounting only for fuel consumption.

  8. Airborne endotoxin in woodworking (joinery) shops.

    PubMed

    Harper, Martin; Andrew, Michael E

    2006-01-01

    Symptoms such as shortness of breath and cough have been noted in woodworking facilities even where wood dust itself is well-controlled. Suspicion has fallen on other possible contaminants in the workplace atmosphere, including bacterial endotoxin. A few studies have indicated potentially high endotoxin exposure with exposure to fresh wood in sawmills and in the production of fiberboard and chipboard, but fewer studies have been carried out on exposure to endotoxin in dry wood work, for example in joineries. A study of the endotoxin content of airborne wood dust samples from US woodworking facilities is presented, from the re-analysis of samples which previously had been taken to establish mass collection relationships between the IOM sampler, the closed-face 37 mm plastic cassette (CFC) sampler and the Button sampler. Endotoxin was strongly correlated with total dust, but the endotoxin content of a few fresh wood samples was found to be up to ten times higher per unit of wood dust than for dried-wood samples, and this difference was significant. No long-term time-weighted average sample exceeded the recommended limit value of 50 EU m(-3) (EU, endotoxin units)used in the Netherlands, although a number of the IOM samples came close (seven samples or 44% exceeded 20 EU m(-3)) and one short-term (48 minute) sample registered a high value of 73 EU m(-3). The geometric mean concentration from the IOM samples (11 EU m(-3)) is within the range of geometric means found from Australian joineries (3.7-60, combined: 24 EU m(-3)). In contrast, the corresponding values from the CFC (3.6 EU m(-3)), and the Button sampler (2.1 EU m(-3)) were much lower and no samples exceeded 20 EU m(-3). Endotoxin is likely only to be a significant problem in working with dried woods when associated with very high dust levels, where the wood dust itself is likely to be a cause for concern. The results from the few samples in this study where fresh wood was being worked were similar to results from other studies involving fresh woods. The agreement between these studies is encouraging given the difficulties of endotoxin analysis and the wide variation often expected between different laboratories.

  9. Low temperature magnetic characterization of EuO1-x

    NASA Astrophysics Data System (ADS)

    Rimal, Gaurab; Tang, Jinke

    EuO is a widely studied magnetic semiconductor. It is an ideal case of a Heisenberg ferromagnet as well as a model magnetic polaron system. The interesting aspect of this material is the existance of magnetic polarons in the low temperature region. We study the properties of oxygen deficient EuO prepared by pulsed laser deposition. Besides normal ferromagnetic transitions near 70K and 140K, we observe a different transition at 16K. We also observe a shift in the coercivity for field cooling versus zero field cooling. Possible mechanisms driving these behaviors will be discussed. This work was supported by the U.S. Department of Energy, Office of Basic Energy Sciences, Division of Materials Sciences and Engineering (DEFG02-10ER46728) and by the School of Energy Resources of the University of Wyoming.

  10. Counting the Photons: Determining the Absolute Storage Capacity of Persistent Phosphors

    PubMed Central

    Rodríguez Burbano, Diana C.; Capobianco, John A.

    2017-01-01

    The performance of a persistent phosphor is often determined by comparing luminance decay curves, expressed in cd/m2. However, these photometric units do not enable a straightforward, objective comparison between different phosphors in terms of the total number of emitted photons, as these units are dependent on the emission spectrum of the phosphor. This may lead to incorrect conclusions regarding the storage capacity of the phosphor. An alternative and convenient technique of characterizing the performance of a phosphor was developed on the basis of the absolute storage capacity of phosphors. In this technique, the phosphor is incorporated in a transparent polymer and the measured afterglow is converted into an absolute number of emitted photons, effectively quantifying the amount of energy that can be stored in the material. This method was applied to the benchmark phosphor SrAl2O4:Eu,Dy and to the nano-sized phosphor CaS:Eu. The results indicated that only a fraction of the Eu ions (around 1.6% in the case of SrAl2O4:Eu,Dy) participated in the energy storage process, which is in line with earlier reports based on X-ray absorption spectroscopy. These findings imply that there is still a significant margin for improving the storage capacity of persistent phosphors. PMID:28773228

  11. Multi-hundred kilowatt roll ring assembly

    NASA Technical Reports Server (NTRS)

    Jacobson, Peter E.

    1985-01-01

    A program was completed to develop an evaluation unit of a high power rotary transfer device for potential application in a space environment. This device was configured around a Roll Ring concept which performs the same function as a slip ring/brush assembly with a rolling instead of sliding interface. An eight circuit Evaluation Unit (EU) and a portable Test Fixture (TF) were designed and fabricated. The EU was designed to transfer currents to 200 amperes at a potential of as high as 500 volts for an ultimate 100 kW/circuit transfer capability. The EU was evaluated in vacuum at dc transfer currents of 50 to 200 amperes at voltages to 10 volts and at 500 volts at 2 amperes. Power transfer to levels of 2 kW through each of the eight circuits was completed. Power transfer in vacuum at levels and efficiencies not previously achieved was demonstrated. The terminal-to-terminal resistance was measured to be greater than 0.42 milliohms which translates to an efficiency at 100 kW of 99.98 percent. The EU and TF have been delivered to the Lewis Research Center and are being prepared tor testing at increased power levels and for life testing, which will include both dc and ac power.

  12. Search Engines: Gateway to a New ``Panopticon''?

    NASA Astrophysics Data System (ADS)

    Kosta, Eleni; Kalloniatis, Christos; Mitrou, Lilian; Kavakli, Evangelia

    Nowadays, Internet users are depending on various search engines in order to be able to find requested information on the Web. Although most users feel that they are and remain anonymous when they place their search queries, reality proves otherwise. The increasing importance of search engines for the location of the desired information on the Internet usually leads to considerable inroads into the privacy of users. The scope of this paper is to study the main privacy issues with regard to search engines, such as the anonymisation of search logs and their retention period, and to examine the applicability of the European data protection legislation to non-EU search engine providers. Ixquick, a privacy-friendly meta search engine will be presented as an alternative to privacy intrusive existing practices of search engines.

  13. Trace element geochemistry of zircons from mineralizing and non-mineralizing igneous rocks related to gold ores at Yanacocha, Peru

    NASA Astrophysics Data System (ADS)

    Koleszar, A. M.; Dilles, J. H.; Kent, A. J.; Wooden, J. L.

    2012-12-01

    Zircons record important details about the evolution of magmatic systems, are relatively insensitive to alteration, and have been used to investigate the geochemistry, temperature, and oxidation state of volcanic and plutonic system. We examine zircons that span 6-7 m.y. of calc-alkaline volcanic activity in the Yanacocha district of northern Peru, where dacitic intrusions are associated with high-sulfidation gold deposits. The 14.5-8.4 Ma Yanacocha Volcanics include cogenetic lavas and pyroclastic rocks and are underlain by the andesites and dacites of the Calipuy Group, the oldest Cenozoic rocks in the region. We present data for magmatic zircons from the Cerro Fraile dacitic pyroclastics (15.5-15.1 Ma) of the Calipuy Group, and multiple eruptive units within the younger Yanacocha Volcanics: the Atazaico Andesite (14.5-13.3 Ma), the Quilish Dacite (~14-12 Ma), the Azufre Andesite (12.1-11.6 Ma), the San Jose Ignimbrite (11.5-11.2 Ma), and the Coriwachay Dacite (11.1-8.4 Ma). Epithermal high sulfidation (alunite-bearing) gold deposits are associated with the dacite intrusions of the Coriwachay and Quilish Dacites. Zircons from the non-mineralizing rocks typically have lower Hf concentrations and record Ti-in-zircon temperatures that are ~100°C hotter than zircons from the mineralizing intrusions. Temperatures recorded by zircons from the mineralizing intrusions are remarkably similar to those of the underlying Cerro Fraile dacite pyroclastics, but the zircons discussed here generally record SHRIMP-RG 206Pb/238U ages within error of previously published Ar-Ar eruption ages (eliminating antecrystic or xenocrystic origins). These observations suggest that zircons in the mineralizing intrusions form after greater extents of crystallization (and thus record elevated Hf concentrations and lower temperatures) than do zircons in the non-mineralized deposits. Unlike zircons from mineralized units associated with the porphyry Cu(Mo) deposits in Yerington, Nevada, which generally have Eu/Eu* ratios approaching 1 (i.e., Eu-anomalies that decrease in magnitude) with increasing Hf (and thus increasing crystallization), zircons associated with mineralized deposits in the Coriwachay and Quilish intrusions at Yanacocha typically have Eu-anomalies that are highly variable but do not vary systematically during magma evolution. These Eu/Eu* versus Hf trends are inconsistent with observations from the porphyry Cu-Mo(Au) deposit at El Salvador, Chile, where zircons from all porphyry intrusions have Eu-anomalies that become systematically more negative during magma evolution but with highest Eu/Eu* occurring in mineralized intrusions. We explore a variety of scenarios to explain the Eu/Eu* systematics of zircons from Yanacocha, including changes to the magmatic oxidation state as a consequence of anhydrite breakdown and progressive degassing.

  14. Two-dimensional magneto-optical light modulation in EuTiO3

    NASA Astrophysics Data System (ADS)

    Bussmann-Holder, Annette; Roleder, Krystian; Stuhlhofer, Benjamin; Logvenov, Gennady; Simon, Arndt; KöHler, Jürgen

    EuTiO3 is antiferromagnetic at low temperature, namely below TN = 5.7K. In the high temperature paramagnetic phase the strongly nonlinear coupling between the lattice and the nomnially silent Eu 4f7 spins induces magnetic correlations which become apparent in muon spin rotation experiments and more recently in birefringence measurments in an external magnetic field. It is shown here, that high quality films of insulating EuTiO3 deposited on a thin SrTiO3 substrate are versatile tools for light modulation. The operating temperature is close to room temperature and admits multiple device engineering. By using small magnetic fields the birefringence of the samples can be switched off and on. Similarly, rotation of the sample in the field can modify its birefringence Δn. In addition, Δn can be increased by a factor of 4 in very modest fields with simultaneously enhancing the operating temperature by almost 100K. The results can be understood in terms of paramagnon phonon interaction where spin activity is achieved via the local spin-phonon double-well potential.

  15. Theoretical insights into the photo-protective mechanisms of natural biological sunscreens: building blocks of eumelanin and pheomelanin.

    PubMed

    Marchetti, Barbara; Karsili, Tolga N V

    2016-02-07

    Eumelanin (EM) and pheomelanin (PM) are ubiquitous in mammalian skin and hair--protecting against harmful radiation from the sun. Their primary roles are to absorb solar radiation and efficiently dissipate the excess excited state energy in the form of heat without detriment to the polymeric structure. EU and PM exist as polymeric chains consisting of exotic arrangements of functionalised heteroaromatic molecules. Here we have used state-of-the-art electronic structure calculations and on-the-fly surface hopping molecular dynamics simulations to study the intrinsic deactivation paths of various building blocks of EU and PM. Ultrafast excited state decay, via electron-driven proton transfer (in EU and PM) and proton-transfer coupled ring-opening (in PM) reactions, have been identified to proceed along hitherto unknown charge-separated states in EU and PM oligomers. These results shed light on the possible relaxation pathways that dominate the photochemistry of natural skin melanins. Extrapolation of such findings could provide a gateway into engineering more effective molecular constituents in commercial sunscreens--with reduced phototoxicity.

  16. Advanced Stirling Radioisotope Generator (ASRG) Thermal Power Model in MATLAB

    NASA Technical Reports Server (NTRS)

    Wang, Xiao-Yen, J.

    2012-01-01

    This paper presents a one-dimensional steady-state mathematical thermal power model of the ASRG. It aims to provide a guideline of understanding how the ASRG works and what can change its performance. The thermal dynamics and energy balance of the generator is explained using the thermal circuit of the ASRG. The Stirling convertor performance map is used to represent the convertor. How the convertor performance map is coupled in the thermal circuit is explained. The ASRG performance characteristics under i) different sink temperatures and ii) over the years of mission (YOM) are predicted using the one-dimensional model. Two Stirling converter control strategies, i) fixing the hot-end of temperature of the convertor by adjusting piston amplitude and ii) fixing the piston amplitude, were tested in the model. Numerical results show that the first control strategy can result in a higher system efficiency than the second control strategy when the ambient gets warmer or the general-purpose heat source (GPHS) fuel load decays over the YOM. The ASRG performance data presented in this paper doesn't pertain to the ASRG flight unit. Some data of the ASRG engineering unit (EU) and flight unit that are available in public domain are used in this paper for the purpose of numerical studies.

  17. Mixed valent stannide EuRuSn 3 - Structure, magnetic properties, and Mössbauer spectroscopic investigation

    NASA Astrophysics Data System (ADS)

    Harmening, Thomas; Hermes, Wilfried; Eul, Matthias; Pöttgen, Rainer

    2010-02-01

    The stannide EuRuSn 3 was synthesized by induction melting of the elements in a sealed tantalum tube in a water-cooled quartz glass sample chamber. The structure was refined on the basis of single crystal X-ray diffractometer data (LaRuSn 3 type, Pm3¯n, a = 976.0(1) pm, wR2 = 0.0399, 317 F2 values, and 13 variables). EuRuSn 3 shows modified Curie-Weiss behaviour in the temperature range 50-305 K with an experimental magnetic moment of 7.34(1) μB per formula unit. Thus, the europium atoms are not in a purely divalent state. Low field susceptibility measurement indicates a ferro- or ferrimagnetic ordering at TC = 11.2(2) K and magnetization measurements indicate EuRuSn 3 as a non-collinear ferro- or ferrimagnet. 151Eu Mössbauer spectroscopic measurements suggested one europium site to be static mixed valent with a Eu 2+/Eu 3+ ratio close to one and the other site purely divalent. This was supported by substituting the Eu 3+ atoms with Y 3+ in a sample with a composition of Eu 0.7Y 0.3RuSn 3 ( a = 971.24(8) pm, wR2 = 0.0485, 313 F2 values, 14 variables). The 119Sn Mössbauer spectra show a pronounced Gol'danskii-Karyagin effect in the paramagnetic range and a magnetic hyperfine field distribution at 4.2 K, due to the complex magnetic structure. The influence of the valence electron concentration on the europium valence was tested via Ru/Pd substitution. A EuRu 0.8Pd 0.2Sn 3 sample shows almost purely divalent europium.

  18. Citizen observatory of water as a data engine supporting the people-hydrology nexus: experience of the WeSenseIt project

    NASA Astrophysics Data System (ADS)

    Ferri, Michele; Baruffi, Francesco; Norbiato, Daniele; Monego, Martina; Tomei, Giovanni; Solomatine, Dimitri; Alfonso, Leonardo; Mazzoleni, Maurizio; Chacon, Juan Carlos; Wehn, Uta; Ciravegna, Fabio

    2016-04-01

    Citizen observatories (COs) present an interesting case of strong multi-facet feedback between the physical (water) system and humans. CO is a form of crowdsourcing ensuring a data flow from citizens observing environment (e.g. water level in a river) to a central data processing unit which is typically part of a more complex social arrangement (e.g. water authorities responsible for flood forecasting). The EU-funded project WeSenseIt (www.wesenseit.eu) aims at developing technologies and tools supporting creation of such COs [1,2,3,4]. Citizens which form a CO play the role of "social sensors" which however are very specific. The data streams from such sensors have varying temporal and spatial coverage and information value (uncertainty). The crowdsourced data can be of course simply visualized and presented to public, but it is much more interesting to consider cases when such data are assimilated into the existing forecasting systems, e.g. flood early warning systems based on hydrological and hydraulic models. COs may also affect water management and governance [4], and in fact can be seen as data engines supporting the people-hydrology nexus. In the framework of WeSenseIt project several approaches were developed allowing for optimal assimilation of intermittent data streams with varying spatial coverage into distributed hydrological models [1, 2]. The mentioned specific features of CO data required updates of the existing data assimilation algorithms (Ensemble Kalman Filter was used as the basic algorithm). The developed algorithms have been implemented in the operational flood forecasting systems of the Alto Adriatico Water Authority (AAWA), Venice. In this paper we analyse various scenarios of employing citizens data (COs) for flood forecasting. This study is partly supported by the FP7 European Project WeSenseIt Citizen Water Observatory (www.http://wesenseit.eu/). References [1] Mazzoleni, M., Alfonso, L., Chacon-Hurtado, J., Solomatine, D. (2015). Assimilating uncertain, dynamic and intermittent streamflow observations in hydrological models. Advances in Water Res., 83, 323-339 (Online on September 1, 2015). [2] Mazzoleni M., Verlaan M., Alfonso L., Monego M., Norbiato D., Ferri M., and Solomatine D.P. (2015) Can assimilation of crowdsourced streamflow observations in hydrological modelling improve flood prediction?, Hydrology and Earth System Sciences, under review. [3] Mazzoleni M., Alfonso L. and Solomatine D.P. (2015) Effect of spatial distribution and quality of sensors on the assimilation of distributed streamflow observations in hydrological modeling, Hydrological Sciences Journal, under review. [4] Wehn, U., McCarty, S., Lanfranchi, V. and Tapsell, S. (2015) Citizen observatories as facilitators of change in water governance? Experiences from three European cases, Special Issue on ICTs and Water, Journal of Environmental Engineering and Management, 2073-2086.

  19. Centralisation for resection of the pancreatic head: A comparison of operative factors and early outcomes during the evolving unit and tertiary unit phases at a UK institution.

    PubMed

    Kostalas, M; Nageswaran, H; Froghi, S; Riga, A; Kumar, R; Menezes, N; Worthington, T R; Karanjia, N D

    2017-08-19

    To assess impact of centralisation on patients undergoing pancreatic head resections at a tertiary hepatobiliary (HPB) centre in the UK. Data were analysed from a prospectively maintained database from 1998 to 2014 on all patients undergoing pancreatic head resections. Two specific time periods were defined; these were the evolving unit phase (EU) from 1998 to 2009 and finally the established tertiary unit phase (TU) from 2010 to 2014. Peri-operative factors and post-operative outcomes were analysed. 395 resections were undertaken during the study period. Following establishment of our tertiary HPB unit, the volume of resections undertaken increased greater than three-fold with an associated increase in case-complexity (p = 0.004). Operating time was found to increase in the TU phase compared with EU phase (p=>0.0005) whilst there was no significant difference in the rate of peri-operative transfusion, or in post-operative morbidity rates. There was a significant reduction in the post-operative length of stay in the TU phase (p = 0.003) with a significantly higher proportion of patients being discharged within 9 days of their procedure (p=<0.0005). There was also a significant reduction in 30-day post-operative mortality in the TU phase (0.5%) compared with the EU phase (3%) (p = 0.029). Data from our series of 395 cases suggests that centralisation of pancreatic cancer services to a tertiary centre does result in improved patient outcomes. The benefits of a multi-disciplinary and specialist HPB service results in a high volume, high quality unit with improved patient outcomes. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

  20. Temporal Trends (1999-2015) in the Impact Factor of Biomedical Journals Published by US and EU Scientific Societies.

    PubMed

    Falagas, Matthew E; Kyriakidou, Margarita; Spais, George; Argiti, Efstathia; Vardakas, Konstantinos Z

    2018-04-19

    The impact factor has emerged as the most popular index of scientific journals' resonance. In this study we aimed to examine the impact factor trends of journals published by scientific bodies in the United States of America (USA) and Europe (EU). We randomly chose 11 categories of Journal of Citation Reports and created three research classes: clinical medicine, laboratory medicine, and basic science. The impact factor values for the years 1999-2015 were abstracted, and the impact factor of US and EU journals was studied through the years. A total of 265 journals were included in the final analysis. The impact factor of US journals was higher than that of EU journals throughout the study period. In addition, for both US and EU journals the median impact factor increased throughout the study period. The rate of annual change in the impact factor throughout the study period was lower for US than EU journals (1.85% versus 3.55%, P=0.019). A higher median annual increase was seen in the impact factor during the period 1999-2008 compared to the period 2009-2015 for both US (P<0.001) and EU (P=0.001) journals. In fact, during the second period the US median impact factor value did not show significant changes (P=0.31), while the EU median impact factor continued to increase (P<0.001). The impact factor of EU journals increased at a significantly higher rate than and approached that of the US journals during the last 16 years.

  1. EuCliD (European Clinical Database): a database comparing different realities.

    PubMed

    Marcelli, D; Kirchgessner, J; Amato, C; Steil, H; Mitteregger, A; Moscardò, V; Carioni, C; Orlandini, G; Gatti, E

    2001-01-01

    Quality and variability of dialysis practice are generally gaining more and more importance. Fresenius Medical Care (FMC), as provider of dialysis, has the duty to continuously monitor and guarantee the quality of care delivered to patients treated in its European dialysis units. Accordingly, a new clinical database called EuCliD has been developed. It is a multilingual and fully codified database, using as far as possible international standard coding tables. EuCliD collects and handles sensitive medical patient data, fully assuring confidentiality. The Infrastructure: a Domino server is installed in each country connected to EuCliD. All the centres belonging to a country are connected via modem to the country server. All the Domino Servers are connected via Wide Area Network to the Head Quarter Server in Bad Homburg (Germany). Inside each country server only anonymous data related to that particular country are available. The only place where all the anonymous data are available is the Head Quarter Server. The data collection is strongly supported in each country by "key-persons" with solid relationships to their respective national dialysis units. The quality of the data in EuCliD is ensured at different levels. At the end of January 2001, more than 11,000 patients treated in 135 centres located in 7 countries are already included in the system. FMC has put the patient care at the centre of its activities for many years and now is able to provide transparency to the community (Authorities, Nephrologists, Patients.....) thus demonstrating the quality of the service.

  2. Photofunctional Eu3+/Tb3+ hybrids through sulfoxide linkages: coordination bonds construction, characterization and luminescence.

    PubMed

    Guo, Lei; Yan, Bing; Liu, Jin-Liang

    2011-05-14

    New kinds of organic-inorganic hybrid materials consisting of rare earth (Eu(3+), Tb(3+)) complexes covalently bonded to a silica-based network have been obtained by a sol-gel approach. Three novel versatile molecular building blocks containing sulfoxide organic units have been synthesized by methylene modification reaction, which are used as the ligands of rare earth ions and also as siloxane network precursors. The obtained hybrids are characterized by chemical analysis and spectroscopic methods such as FTIR and UV; XRD and SEM. Photoluminescence measurements on the prepared hybrids were performed showing the intra-4f(n) emission in the visible (Eu(3+), Tb(3+)) region and in all the cases being sensitized by the sulfoxide ligands. The emission quantum efficiency and the Judd-Ofelt intensity parameters of Eu(3+) hybrid materials were also investigated in detail.

  3. Cell-Based Veterinary Pharmaceuticals – Basic Legal Parameters Set by the Veterinary Pharmaceutical Law and the Genetic Engineering Law of the European Union

    PubMed Central

    Faltus, Timo; Brehm, Walter

    2016-01-01

    Cell-based therapies have been in use in veterinary medicine for years. However, the legal requirement of manufacturing, placing on the market and use of cell-based veterinary pharmaceuticals are not as well developed as the respective requirements of chemical pharmaceuticals. Cell-based veterinary pharmaceuticals are medicinal products in the sense of the pharmaceutical law of the European Union (EU). For that reason, such medicinal products principally require official approval for their manufacture and an official marketing authorization for their placement on the market before being used by the veterinarian. The manufacture, placing on the market, and use of cell-based veterinary pharmaceuticals without manufacturing approval and marketing authorization is permitted only in certain exceptional cases determined by EU and individual Member State law. Violations of this requirement may have consequences for the respective veterinarian under criminal law and under the code of professional conduct in the respective Member State. The regular use of cell-based veterinary pharmaceuticals within the scope of a therapeutic emergency as well as the import of such veterinary pharmaceuticals from non-European countries for use in the EU are currently out of the question in the EU because of a lack of legal bases. Here, we review the general legal requirement of manufacturing, placing on the market, and use of cell-based veterinary pharmaceuticals within the EU and point out different implementations of EU law within the different Member States. PMID:27965965

  4. Cell-Based Veterinary Pharmaceuticals - Basic Legal Parameters Set by the Veterinary Pharmaceutical Law and the Genetic Engineering Law of the European Union.

    PubMed

    Faltus, Timo; Brehm, Walter

    2016-01-01

    Cell-based therapies have been in use in veterinary medicine for years. However, the legal requirement of manufacturing, placing on the market and use of cell-based veterinary pharmaceuticals are not as well developed as the respective requirements of chemical pharmaceuticals. Cell-based veterinary pharmaceuticals are medicinal products in the sense of the pharmaceutical law of the European Union (EU). For that reason, such medicinal products principally require official approval for their manufacture and an official marketing authorization for their placement on the market before being used by the veterinarian. The manufacture, placing on the market, and use of cell-based veterinary pharmaceuticals without manufacturing approval and marketing authorization is permitted only in certain exceptional cases determined by EU and individual Member State law. Violations of this requirement may have consequences for the respective veterinarian under criminal law and under the code of professional conduct in the respective Member State. The regular use of cell-based veterinary pharmaceuticals within the scope of a therapeutic emergency as well as the import of such veterinary pharmaceuticals from non-European countries for use in the EU are currently out of the question in the EU because of a lack of legal bases. Here, we review the general legal requirement of manufacturing, placing on the market, and use of cell-based veterinary pharmaceuticals within the EU and point out different implementations of EU law within the different Member States.

  5. Activation cross section and isomeric cross section ratios for the (n ,2 n ) reaction on 153Eu

    NASA Astrophysics Data System (ADS)

    Luo, Junhua; Jiang, Li; Li, Suyuan

    2017-10-01

    The 153Eu(n ,2 n ) m1,m2,g152Eu cross section was measured by means of the activation technique at three neutron energies in the range 13-15 MeV. The quasimonoenergetic neutron beam was formed via the 3H(d ,n ) 4He reaction, in the Pd-300 Neutron Generator at the Chinese Academy of Engineering Physics (CAEP). The activities induced in the reaction products were measured using high-resolution γ-ray spectroscopy. The cross section of the population of the second high-spin (8-) isomeric state was measured along with the reaction cross section populating both the ground (3-) and the first isomeric state (0-). Cross sections were also evaluated theoretically using the numerical code TALYS-1.8, with different level density options at neutron energies varying from the reaction threshold to 20 MeV. Results are discussed and compared with the corresponding literature.

  6. Quantum Hall effect in a bulk antiferromagnet EuMnBi2 with magnetically confined two-dimensional Dirac fermions.

    PubMed

    Masuda, Hidetoshi; Sakai, Hideaki; Tokunaga, Masashi; Yamasaki, Yuichi; Miyake, Atsushi; Shiogai, Junichi; Nakamura, Shintaro; Awaji, Satoshi; Tsukazaki, Atsushi; Nakao, Hironori; Murakami, Youichi; Arima, Taka-hisa; Tokura, Yoshinori; Ishiwata, Shintaro

    2016-01-01

    For the innovation of spintronic technologies, Dirac materials, in which low-energy excitation is described as relativistic Dirac fermions, are one of the most promising systems because of the fascinating magnetotransport associated with extremely high mobility. To incorporate Dirac fermions into spintronic applications, their quantum transport phenomena are desired to be manipulated to a large extent by magnetic order in a solid. We report a bulk half-integer quantum Hall effect in a layered antiferromagnet EuMnBi2, in which field-controllable Eu magnetic order significantly suppresses the interlayer coupling between the Bi layers with Dirac fermions. In addition to the high mobility of more than 10,000 cm(2)/V s, Landau level splittings presumably due to the lifting of spin and valley degeneracy are noticeable even in a bulk magnet. These results will pave a route to the engineering of magnetically functionalized Dirac materials.

  7. Size-induced variations in bulk/surface structures and their impact on photoluminescence properties of GdVO4:Eu3+ nanoparticles.

    PubMed

    Yang, Liusai; Li, Liping; Zhao, Minglei; Li, Guangshe

    2012-07-28

    This work explores the size-induced lattice modification and its relevance to photoluminescence properties of tetragonal zircon-type GdVO(4):Eu(3+) nanostructures. GdVO(4):Eu(3+) nanoparticles with crystallite sizes ranging from 14.4 to 24.7 nm were synthesized by a hydrothermal method using sodium citrate as a capping agent. Regardless of the reaction temperatures, all samples retained an ellipsoidal-like morphology. Nevertheless, as the crystallite size reduces, there appears a tensile strain and lattice distortion, which is accompanied by a lattice expansion and a decreased symmetry of structural units. These lattice modifications could be associated with the changes in the interior chemical bonding due to the interactions of surface defect dipoles that have imposed an increased negative pressure with crystallite size reduction. Furthermore, crystallite size reduction also led to a significant increase in the amounts of surface hydroxyl groups and citric species, as well as the concentration of the surface Eu(3+) ions. When Eu(3+) was taken as a structural probe, it was found that the asymmetric ratio (I(02)/I(01)) of Eu(3+) gradually declined to show a remarkable decrease in color chromaticity as crystallite size reduces, which could be interpreted as due to the change of local environments of Eu(3+) ions from the interior to the surface of the nanoparticles.

  8. Eu(III) Complexes of Octadentate 1-Hydroxy-2-pyridinones: Stability and Improved Photophysical Performance[].

    PubMed

    Moore, Evan G; D'Aléo, Anthony; Xu, Jide; Raymond, Kenneth N

    2009-10-13

    The luminescence properties of lanthanoid ions can be dramatically enhanced by coupling them to antenna ligands that absorb light in the UV/visible and then efficiently transfer the energy to the lanthanoid center. The synthesis and the complexation of Ln(III) cations (Ln=Eu; Gd) for a ligand based on four 1-hydroxy-2-pyridinone (1,2-HOPO) chelators appended to a ligand backbone derived by linking two L-lysine units (3LI-bis-LYS) is described. This octadentate Eu(III) complex ([Eu(3LI-bis-LYS-1,2-HOPO)](-)) has been evaluated in terms of its thermodynamic stability, UV/visible absorption and luminescence properties. For this complex the conditional stability constant (pM) is 19.9, which is an order of magnitude higher than diethylenetriaminepentacetic acid (DTPA) at pH= 7.4. This Eu(III) complex also shows an almost two-fold increase in its luminescence quantum yield in aqueous solution (pH= 7.4) when compared to other octadentate ligands. Hence, despite a slight decrease of the molar absorption coefficient, a much higher brightness is obtained for [Eu(3LI-bis-LYS-1,2-HOPO)](-). This overall improvement was achieved by saturating the coordination sphere of the Eu(III) cation, yielding an increased metal centered efficiency by excluding solvent water molecules from the metal's inner sphere.

  9. Effect of tasting and information on consumer opinion about pig castration.

    PubMed

    Kallas, Zein; Gil, José Maria; Panella-Riera, Nuria; Blanch, Marta; Font-i-Furnols, Maria; Chevillon, Patrick; De Roest, Kees; Tacken, Gemma; Oliver, Maria Angels

    2013-10-01

    Our research explored the relative importance of pig castration amongst other aspects of animal welfare, and the potential impact of information and sensory experiences on European Union (EU) consumers' preferences. The EU is considering a future ban on surgical pig castration by 2018 which may affect markets and consumers' preferences. We carried out an empirical study using consumer-level data obtained from questionnaires completed in a controlled environment by a total of 825 consumers. The experiment was carried out in six EU countries (Spain, United Kingdom, The Netherlands, France, Italy and Germany) which account for 66.0% of the EU-27's and 76.3% of the EU-15's meat production. Results show that consumers do not perceive pig castration to be a relevant aspect of animal welfare nor its relationship with meat quality. Consumers with healthy life styles, concerned about animal welfare and who have had a negative sensory experience with boar meat are willing to accept paying more to avoid boar taint. Copyright © 2013 Elsevier Ltd. All rights reserved.

  10. Dynamic visualisation of municipal waste management performance in the EU using Ternary Diagram method.

    PubMed

    Pomberger, R; Sarc, R; Lorber, K E

    2017-03-01

    This contribution describes the dynamic visualisation of European (EU 28) municipal waste management performance, using the Ternary Diagram Method. Municipal waste management performance depends primarily on three treatment categories: recycling & composting, incineration and landfilling. The framework of current municipal waste management including recycling targets, etc. is given by the Waste Framework Directive - 2008/98/EC. The proposed Circular Economy Package should stimulate Europe's transition towards more sustainable resources and energy oriented waste management. The Package also includes a revised legislative proposal on waste that sets ambitious recycling rates for municipal waste for 2025 (60%) and 2030 (65%). Additionally, the new calculation method for monitoring the attainment of the targets should be applied. In 2014, ca. 240 million tonnes of municipal waste were generated in the EU. While in 1995, 17% were recycled and composted, 14% incinerated and 64% landfilled, in 2014 ca. 71% were recovered but 28% landfilled only. Considering the treatment performance of the individual EU member states, the EU 28 can be divided into three groups, namely: "Recovery Countries", "Transition Countries" and "Landfilling Countries". Using Ternary Diagram Method, three types of visualization for the municipal waste management performance have been investigated and extensively described. Therefore, for better understanding of municipal waste management performance in the last 20years, dynamic visualisation of the Eurostat table-form data on all 28 member states of the EU has been carried out in three different ways: 1. "Performance Positioning" of waste management unit(s) at a specific date; 2. "Performance dynamics" over a certain time period and; 3. "Performance development" expressed as a track(s). Results obtained show that the Ternary Diagram Method is very well suited to be used for better understanding of past developments and coherences, for monitoring of current situations and prognosis of future paths. One of the interesting coherences shown by the method is the linked development of recycling & composting (60-65%) with incineration (40-35%) performance over the last 20years in the EU 28. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Layered rare-earth hydroxide and oxide nanoplates of the Y/Tb/Eu system: phase-controlled processing, structure characterization and color-tunable photoluminescence via selective excitation and efficient energy transfer.

    PubMed

    Wu, Xiaoli; Li, Ji-Guang; Li, Jinkai; Zhu, Qi; Li, Xiaodong; Sun, Xudong; Sakka, Yoshio

    2013-02-01

    Well-crystallized (Y 0.97- x Tb 0.03 Eu x ) 2 (OH) 5 NO 3 · n H 2 O ( x = 0-0.03) layered rare-earth hydroxide (LRH) nanoflakes of a pure high-hydration phase have been produced by autoclaving from the nitrate/NH 4 OH reaction system under the optimized conditions of 100 °C and pH ∼7.0. The flakes were then converted into (Y 0.97- x Tb 0.03 Eu x ) 2 O 3 phosphor nanoplates with color-tunable photoluminescence. Detailed structural characterizations confirmed that LRH solid solutions contained NO 3 - anions intercalated between the layers. Characteristic Tb 3+ and Eu 3+ emissions were detected in the ternary LRHs by selectively exciting the two types of activators, and the energy transfer from Tb 3+ to Eu 3+ was observed. Annealing the LRHs at 1100 °C produced cubic-lattice (Y 0.97- x Tb 0.03 Eu x ) 2 O 3 solid-solution nanoplates with exposed 222 facets. Multicolor, intensity-adjustable luminescence was attained by varying the excitation wavelength from ∼249 nm (the charge transfer excitation band of Eu 3+ ) to 278 nm (the 4f 8 -4f 7 5d 1 transition of Tb 3+ ). Unitizing the efficient Tb 3+ to Eu 3+ energy transfer, the emission color of (Y 0.97- x Tb 0.03 Eu x ) 2 O 3 was tuned from approximately green to yellowish-orange by varying the Eu 3+ /Tb 3+ ratio. At the optimal Eu 3+ content of x = 0.01, the efficiency of energy transfer was ∼91% and the transfer mechanism was suggested to be electric multipole interactions. The phosphor nanoplates developed in this work may be incorporated in luminescent films and find various lighting and display applications.

  12. EuCARD2: enhanced accelerator research and development in Europe

    NASA Astrophysics Data System (ADS)

    Romaniuk, Ryszard S.

    2013-10-01

    Accelerator science and technology is one of a key enablers of the developments in the particle physic, photon physics and also applications in medicine and industry. EuCARD2 is an European research project which will be realized during 2013-2017 inside the EC FP7 framework. The project concerns the development and coordination of European Accelerator Research and Development. The project is particularly important, to a number of domestic laboratories, due to some plans to build large accelerator infrastructure in Poland. Large accelerator infrastructure of fundamental and applied research character stimulates around it the development and industrial applications as well as biomedical of advanced accelerators, material research and engineering, cryo-technology, mechatronics, robotics, and in particular electronics - like networked measurement and control systems, sensors, computer systems, automation and control systems. The paper presents a digest of the European project EuCARD2 which is Enhanced European Coordination for Accelerator Research and Development. The paper presents a digest of the research results and assumptions in the domain of accelerator science and technology in Europe, shown during the final fourth annual meeting of the EuCARD - European Coordination of Accelerator R&D, and the kick-off meeting of the EuCARD2. There are debated a few basic groups of accelerator systems components like: measurement - control networks of large geometrical extent, multichannel systems for large amounts of metrological data acquisition, precision photonic networks of reference time, frequency and phase distribution, high field magnets, superconducting cavities, novel beam collimators, etc. The paper bases on the following materials: Internet and Intranet documents combined with EuCARD2, Description of Work FP7 EuCARD-2 DoW-312453, 2013-02-13, and discussions and preparatory materials worked on by Eucard-2 initiators.

  13. U.S.-UK Relations at the Start of the 21st Century

    DTIC Science & Technology

    2006-01-01

    World Trade Organization (WTO) and the reimposition of sanctions by the EU. "* EU banana regime: The United Kingdom historically protected the banana ...columnist Quentin Peel is surely right when he argues that "the prospects for embracing difficult economic reforms may be as moribund as those for ratifying...defensive French and German governments. As Peel astutely put it: "Far from clearing the way for British leadership, such Franco- German weakness is more

  14. Effect of policies on pellet production and forests in the U.S. South: a technical document supporting the Forest Service update of the 2010 RPA Assessment

    Treesearch

    Karen L. Abt; Robert C. Abt; Christopher S. Galik; Kenneth E. Skog

    2014-01-01

    Current policies in the European Union (EU) requiring renewable and low greenhouse gas-emitting energy are affecting wood products manufacturing and forests in the United States. These policies have led to increased U.S. pellet production and export to the EU, which has in turn affected U.S. forests and other wood products manufacturing. At this time, the primary...

  15. Mobile surveillance units (MSU) for border protection and homeland defense

    NASA Astrophysics Data System (ADS)

    Crandon, Christopher; Kimber, Paul K.

    2003-09-01

    During the last 12 years the European Union (EU) has financed the new member applicant countries of Central and Eastern Europe in their preparation for joining the EU. Based on this enlargement of the EU, funding for border protection has been made available from the overall infrastructure improvement budget. Border protection was required in areas where border conflicts had taken place and to limit illegal immigration and smuggling. After 9/11 defence against terrorist activities will no doubt be added to the requirement. This paper describes the approach taken in the provision of police and para-military Mobile Surveillance Units (MSU's). This approach may also be considered for the US Homeland Defense initiative. These MSU's utilize standard road vehicles converted to use high performance military thermal imagers, such as SiGMA. In future the current, in service, MSU will require increased sensor integration and networking to cover land and coastal borders. The underlying key is affordability for the police and para-military markets while retaining the highest performance derived from the latest military standard thermal imagers.

  16. Mobile surveillance units (MSU) for border protection of the enlarged economic union

    NASA Astrophysics Data System (ADS)

    Crandon, Christopher

    2004-12-01

    During the last 12 years the European Union (EU) has financed the new member applicant countries of Central and Eastern Europe in their preparation for joining the EU. Based on this enlargement of the EU, funding for Cross Border Protection has been made available from the overall infrastructure improvement budget. Border protection was required in areas where border conflicts had taken place and to limit Illegal Immigration (II) and smuggling. After 9/11/2001, defence against terrorist activities will no doubt be added to the requirement. This paper describes the approach taken in the design of the latest "containerised" police and para military Mobile Surveillance Units (MSUs). This approach may also be considered for Homeland Security initiatives. These MSU's utilise standard road vehicles, and off-road variants, converted to use high performance military thermal imagers, such as SiGMA. In future the current, in service, MSUs will require increased sensor integration and networking to cover land and coastal borders. The underlying key is affordability for the police and para-military markets whilst retaining the highest performance derived from the latest SFPA military standard thermal imagers.

  17. How Does Medical Device Regulation Perform in the United States and the European Union? A Systematic Review

    PubMed Central

    Kramer, Daniel B.; Xu, Shuai; Kesselheim, Aaron S.

    2012-01-01

    Background Policymakers and regulators in the United States (US) and the European Union (EU) are weighing reforms to their medical device approval and post-market surveillance systems. Data may be available that identify strengths and weakness of the approaches to medical device regulation in these settings. Methods and Findings We performed a systematic review to find empirical studies evaluating medical device regulation in the US or EU. We searched Medline using two nested categories that included medical devices and glossary terms attributable to the US Food and Drug Administration and the EU, following PRISMA guidelines for systematic reviews. We supplemented this search with a review of the US Government Accountability Office online database for reports on US Food and Drug Administration device regulation, consultations with local experts in the field, manual reference mining of selected articles, and Google searches using the same key terms used in the Medline search. We found studies of premarket evaluation and timing (n = 9), studies of device recalls (n = 8), and surveys of device manufacturers (n = 3). These studies provide evidence of quality problems in pre-market submissions in the US, provide conflicting views of device safety based largely on recall data, and relay perceptions of some industry leaders from self-surveys. Conclusions Few studies have quantitatively assessed medical device regulation in either the US or EU. Existing studies of US and EU device approval and post-market evaluation performance suggest that policy reforms are necessary for both systems, including improving classification of devices in the US and promoting transparency and post-market oversight in the EU. Assessment of regulatory performance in both settings is limited by lack of data on post-approval safety outcomes. Changes to these device approval and post-marketing systems must be accompanied by ongoing research to ensure that there is better assessment of what works in either setting. Please see later in the article for the Editors' Summary. PMID:22912563

  18. Temporal Trends (1999–2015) in the Impact Factor of Biomedical Journals Published by US and EU Scientific Societies

    PubMed Central

    Falagas, Matthew E.; Kyriakidou, Margarita; Spais, George; Argiti, Efstathia; Vardakas, Konstantinos Z.

    2018-01-01

    Objective The impact factor has emerged as the most popular index of scientific journals’ resonance. In this study we aimed to examine the impact factor trends of journals published by scientific bodies in the United States of America (USA) and Europe (EU). Methods We randomly chose 11 categories of Journal of Citation Reports and created three research classes: clinical medicine, laboratory medicine, and basic science. The impact factor values for the years 1999–2015 were abstracted, and the impact factor of US and EU journals was studied through the years. Results A total of 265 journals were included in the final analysis. The impact factor of US journals was higher than that of EU journals throughout the study period. In addition, for both US and EU journals the median impact factor increased throughout the study period. The rate of annual change in the impact factor throughout the study period was lower for US than EU journals (1.85% versus 3.55%, P=0.019). A higher median annual increase was seen in the impact factor during the period 1999–2008 compared to the period 2009–2015 for both US (P<0.001) and EU (P=0.001) journals. In fact, during the second period the US median impact factor value did not show significant changes (P=0.31), while the EU median impact factor continued to increase (P<0.001). Conclusion The impact factor of EU journals increased at a significantly higher rate than and approached that of the US journals during the last 16 years. PMID:29517962

  19. Dilute stuffing in the pyrochlore iridate Eu2Ir2O7

    NASA Astrophysics Data System (ADS)

    Telang, Prachi; Mishra, Kshiti; Sood, A. K.; Singh, Surjeet

    2018-06-01

    The pyrochlore Eu2Ir2O7 has recently attracted significant attention as a candidate Weyl semimetal. The previous reports on this compound unanimously show a thermally induced metal-to-insulator (MI) transition, concomitant with antiferromagnetic long-range ordering of the Ir moments below TN˜120 K. However, there are contradictory reports concerning the slope d ρ /d T of the resistivity plots (ρ ) in the "metallic" state above the MI transition, and the value of ρ in the insulating state, both of which show significant sample dependence. Here, we explore this issue by investigating six different Eu2Ir2O7 samples with slightly varying Eu:Ir ratio. High-resolution synchrotron powder diffraction is done to probe minor variations in the cell parameters of the various Eu2Ir2O7 samples investigated here. Specific heat (Cp) and magnetic susceptibility of all the samples showed long-range antiferromagnetic ordering upon cooling below TN˜120 K. The transitions are, however, found to be smeared out for the off-stoichiometric samples. We show that the sign of d ρ /d T above the MI transition is highly sensitive to the unit-cell length, which, in turn, depends on the level of Eu stuffing at the Ir site. Samples with composition close to the ideal stoichiometry (Eu:Ir =1 ) showed a change of sign of d ρ /d T from negative to positive upon cooling below a certain temperature T*>TMI . With increasing Eu stuffing, T* decreased until a negative d ρ /d T persisted without any sign change down to TMI.

  20. Advanced Stirling Convertor Dynamic Test Approach and Results

    NASA Technical Reports Server (NTRS)

    Meer, David W.; Hill, Dennis; Ursic, Joseph

    2009-01-01

    The U.S. Department of Energy (DOE), Lockheed Martin (LM), and NASA Glenn Research Center (GRC) have been developing the Advanced Stirling Radioisotope Generator (ASRG) for use as a power system for space science missions. As part of the extended operation testing of this power system, the Advanced Stirling Converters (ASC) at NASA John H. Glenn Research Center undergo a vibration test sequence intended to simulate the vibration history of an ASC used in an ASRG for a space mission. This sequence includes testing at Workmanship and Flight Acceptance levels interspersed with periods of extended operation to simulate pre and post fueling. The final step in the test sequence utilizes additional testing at Flight Acceptance levels to simulate launch. To better replicate the acceleration profile seen by an ASC incorporated into an ASRG, the input spectra used in testing the convertors was modified based on dynamic testing of the ASRG Engineering Unit ( ASRG-EU) at Lockheed Martin. This paper presents the vibration test plan for current and future ASC units, including the modified input spectra, and the results of recent tests using these spectra. The test results include data from several accelerometers mounted on the convertors as well as the piston position and output power variables.

  1. Advanced Stirling Convertor (ASC) - From Technology Development to Future Flight Product

    NASA Technical Reports Server (NTRS)

    Wong, Wayne A.; Wood, J. Gary; Wilson, Kyle

    2008-01-01

    The Advanced Stirling Convertor (ASC) is being developed by Sunpower, Inc. under contract to NASA s Glenn Research Center (GRC) with critical technology support tasks lead by GRC. The ASC development, funded by NASA s Science Mission Directorate, started in 2003 as one of 10 competitively awarded contracts that were to address future Radioisotope Power System (RPS) advanced power conversion needs. The ASC technology has since evolved through progressive convertor builds and successful testing to demonstrate high conversion efficiency (38 %), low mass (1.3 kg), hermetic sealing, launch vibration simulation, EMI characterization, and is undergoing extended operation. The GRC and Sunpower team recently delivered three ASC-E machines to the Department of Energy (DOE) and Lockheed Martin Space Systems Company, two units for integration onto the Advanced Stirling Radioisotope Generator Engineering Unit (ASRG EU) plus one spare. The design has recently been initiated for the ASC-E2, an evolution from the ASC-E that substitutes higher temperature materials enabling improved performance and higher reliability margins. This paper summarizes the history and status of the ASC project and discusses plans for this technology which enables RPS specific power of 8 W/kg for future NASA missions.

  2. Teaching Mathematics Using Steplets

    ERIC Educational Resources Information Center

    Bringslid, Odd; Norstein, Anne

    2008-01-01

    This article evaluates online mathematical content used for teaching mathematics in engineering classes and in distance education for teacher training students. In the EU projects Xmath and dMath online computer algebra modules (Steplets) for undergraduate students assembled in the Xmath eBook have been designed. Two questionnaires, a compulsory…

  3. On the Developing Role of Physical Models in Engineering Design Education

    ERIC Educational Resources Information Center

    Green, Graham; Smrcek, Ladislav

    2006-01-01

    Recent research, undertaken using participative observation methods within the Leonardo Da Vinci project "Open-Dynamic-Design", provides evidence that EU industrial practice continues to value the flexibility of physical models across a range of disciplines. This research is placed within the philosophical educational framework…

  4. Multifunctional guest-host particles engineered by reversal nanoimprint lithography

    NASA Astrophysics Data System (ADS)

    Ha, Uh-Myong; Kaban, Burhan; Tomita, Andreea; Krekić, Kristijan; Klintuch, Dieter; Pietschnig, Rudolf; Ehresmann, Arno; Holzinger, Dennis; Hillmer, Hartmut

    2018-03-01

    Particulate polymeric microfibers with incorporated europium(III)oxide (Eu2O3) nanoparticles were introduced as a magneto-photoluminescent multifunctional material fabricated via reversal nanoimprint lithography. To specifically address the volume properties of these guest-host particles, the guest, Eu2O3, was milled down to an average particle size of 350 nm in diameter and mixed with the host-polymer, AMONIL®, before in situ hardening in the imprint stamp. The variation of the fabrication process parameters, i.e. delay time, spin coating speed, as well as the concentration of Eu2O3 nanoparticles was proven to have a significant impact on both the structure quality and the stamp release of the microfibers with respect to the formation of a thinner residual layer. Structural characterization performed by SEM revealed optimum fabrication process parameters for a homogeneous spatial distribution of Eu2O3 nanoparticles within the microfibers while simultaneously avoiding the formation of undesired agglomerates. The magneto-photoluminescent properties of Eu2O3 nanoparticles, i.e. a red emission at 613 nm and a paramagnetic response, were found to be superimposed to the optic and the diamagnetic behaviors of AMONIL®. The results imply that guest-host interdependence of these properties can be excluded and that the suggested technique enables for specific tailoring of particulate multifunctional materials with focus on their volume properties.

  5. Developing Systems Engineering Graduate Programs Aligned to the Body of Knowledge and Curriculum to Advance Systems Engineering (BKCASE (trademark)) Guidelines

    DTIC Science & Technology

    2011-06-01

    2011 6 Topic 2 (Article Title) Lorem ipsum dolor sit amet[1], consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore ...consequat. Duis autem vel eum iriure dolor [2] in hendrerit in vulputate velit esse molestie consequat, vel illum dolor eu feugiat nulla facilisis at...vero eros et accumsan et iusto odio dignissim qui blandit praesent luptatum zzril delenit augue duis dolore te feugait nulla facilisi. Lorem

  6. EuCo 2P 2: A Model Molecular-Field Helical Heisenberg Antiferromagnet

    DOE PAGES

    Sangeetha, N. S.; Cuervo-Reyes, Eduardo; Pandey, Abhishek; ...

    2016-07-19

    The metallic compound EuCo 2P 2 with the body-centered tetragonal ThCr 2Si 2 structure containing Eu spins-7/2 was previously shown from single-crystal neutron diffraction measurements to exhibit a helical antiferromagnetic (AFM) structure below T N=66.5 K with the helix axis along the c axis and with the ordered moments aligned within the ab plane. Here we report crystallography, electrical resistivity, heat capacity, magnetization, and magnetic susceptibility measurements on single crystals of this compound. We demonstrate that EuCo 2P 2 is a model molecular-field helical Heisenberg antiferromagnet from comparisons of the anisotropic magnetic susceptibility χ, high-field magnetization, and magnetic heat capacitymore » of EuCo 2P 2 single crystals at temperature T≤TN with the predictions of our recent formulation of molecular-field theory. Values of the Heisenberg exchange interactions between the Eu spins are derived from the data. The low-T magnetic heat capacity ~T 3 arising from spin-wave excitations with no anisotropy gap is calculated and found to be comparable to the lattice heat capacity. The density of states at the Fermi energy of EuCo 2P 2 and the related compound BaCo 2P 2 are found from the heat capacity data to be large, 10 and 16 states/eV per formula unit for EuCo 2P 2 and BaCo 2P 2, respectively. These values are enhanced by a factor of ~2.5 above those found from DFT electronic structure calculations for the two compounds. Additionally, the calculations also find ferromagnetic Eu–Eu exchange interactions within the ab plane and AFM interactions between Eu spins in nearest- and next-nearest planes, in agreement with the MFT analysis of χ ab(T≤TN).« less

  7. EuCo 2P 2: A Model Molecular-Field Helical Heisenberg Antiferromagnet

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sangeetha, N. S.; Cuervo-Reyes, Eduardo; Pandey, Abhishek

    The metallic compound EuCo 2P 2 with the body-centered tetragonal ThCr 2Si 2 structure containing Eu spins-7/2 was previously shown from single-crystal neutron diffraction measurements to exhibit a helical antiferromagnetic (AFM) structure below T N=66.5 K with the helix axis along the c axis and with the ordered moments aligned within the ab plane. Here we report crystallography, electrical resistivity, heat capacity, magnetization, and magnetic susceptibility measurements on single crystals of this compound. We demonstrate that EuCo 2P 2 is a model molecular-field helical Heisenberg antiferromagnet from comparisons of the anisotropic magnetic susceptibility χ, high-field magnetization, and magnetic heat capacitymore » of EuCo 2P 2 single crystals at temperature T≤TN with the predictions of our recent formulation of molecular-field theory. Values of the Heisenberg exchange interactions between the Eu spins are derived from the data. The low-T magnetic heat capacity ~T 3 arising from spin-wave excitations with no anisotropy gap is calculated and found to be comparable to the lattice heat capacity. The density of states at the Fermi energy of EuCo 2P 2 and the related compound BaCo 2P 2 are found from the heat capacity data to be large, 10 and 16 states/eV per formula unit for EuCo 2P 2 and BaCo 2P 2, respectively. These values are enhanced by a factor of ~2.5 above those found from DFT electronic structure calculations for the two compounds. Additionally, the calculations also find ferromagnetic Eu–Eu exchange interactions within the ab plane and AFM interactions between Eu spins in nearest- and next-nearest planes, in agreement with the MFT analysis of χ ab(T≤TN).« less

  8. COST Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar": first-year activities and results

    NASA Astrophysics Data System (ADS)

    Pajewski, Lara; Benedetto, Andrea; Loizos, Andreas; Slob, Evert; Tosti, Fabio

    2014-05-01

    This work aims at presenting the first-year activities and results of COST (European COoperation in Science and Technology) Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar". This Action was launched in April 2013 and will last four years. The principal aim of COST Action TU1208 is to exchange and increase scientific-technical knowledge and experience of GPR techniques in civil engineering, whilst simultaneously promoting throughout Europe the effective use of this safe and non-destructive technique in the monitoring of infrastructures and structures. Moreover, the Action is oriented to the following specific objectives and expected deliverables: (i) coordinating European scientists to highlight problems, merits and limits of current GPR systems; (ii) developing innovative protocols and guidelines, which will be published in a handbook and constitute a basis for European standards, for an effective GPR application in civil- engineering tasks; safety, economic and financial criteria will be integrated within the protocols; (iii) integrating competences for the improvement and merging of electromagnetic scattering techniques and of data- processing techniques; this will lead to a novel freeware tool for the localization of buried objects, shape-reconstruction and estimation of geophysical parameters useful for civil engineering needs; (iv) networking for the design, realization and optimization of innovative GPR equipment; (v) comparing GPR with different NDT techniques, such as ultrasonic, radiographic, liquid-penetrant, magnetic-particle, acoustic-emission and eddy-current testing; (vi) comparing GPR technology and methodology used in civil engineering with those used in other fields; (vii) promotion of a more widespread, advanced and efficient use of GPR in civil engineering; and (viii) organization of a high-level modular training program for GPR European users. Four Working Groups (WGs) carry out the research activities. The first WG focuses on the design of innovative GPR equipment, on the building of prototypes and on the testing and optimisation of new systems. The second WG focuses on the GPR surveying of pavement, bridges, tunnels and buildings, as well as on the sensing of underground utilities and voids. The third WG deals with the development of electromagnetic forward and inverse scattering methods, for the characterization of GPR scenarios, as well as with data- processing algorithms for the elaboration of the data collected during GPR surveys. The fourth WG works on the use of GPR in fields different from the civil engineering, as well as on the integration of GPR with other non-destructive testing techniques. Each WG includes several Projects. COST Action TU1208 is active through a range of networking tools: meetings, workshops, conferences, training schools, short-term scientific missions, dissemination activities. During the first year of activities, a First General Meeting was organized in Rome, in July 2013, a second meeting took place in Nantes, in February 2014, and the Second General Meeting is being held jointly with the 2014 EGU General Assembly. A training school on "Microwave Imaging and Diagnostics: Theory, Techniques, and Applications", held in March 2014, was co-organised with the European School of Antennas. Four Short-Term Scientific Missions were funded, allowing young researchers to spend a period of time in an institution abroad, in order to carry out a research project contributing to the scientific objectives of the Action. The Action's activities were disseminated in international conferences [1]-[4], as well as in further workshops and meetings. Two volumes were published [5]-[6], and several scientific papers on peer-reviewed journals. A Springer book presenting the state of the art on civil engineering applications of Ground Penetrating Radar is being prepared and is going to be published in summer 2014. A COST Action is a wide bottom-up interdisciplinary science and technology network, open to researchers from universities, public and private research institutions, as well as to NGOs, industry and SMEs. At present, About 100 Institutions from 24 COST Member Countries (Austria, Belgium, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Italy, Latvia, Malta, Macedonia, The Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Switzerland, Turkey, United Kingdom) have already joined the Action, together with an Institution from Armenia (Near Neighbour Country, NNC). Beyond European borders, six Institutions from U.S.A., one from Rwanda and one from Australia have joined the Action. Further applications from two NNCs (Egypt and Ukraine) and International Partner Countries (Hong Kong and Japan) are under examination. COST Action TU1208 is still open to the participation of new parties and it is possible to include, in the scientific work plan, new perspectives and activities. Scientists and scientific institutions willing to join COST Action TU1208 are encouraged to contact the Chair of the Action and to follow the procedure described at http://www.cost.eu/participate/join_action. For more information on COST Action TU1208, please visit www.GPRadar.eu. ----------------------------- Acknowledgement The Authors thanks COST for funding COST Action TU1208. References [1] L. Pajewski, A. Benedetto, A. Loizos, E. Slob, F. Tosti, "Civil Engineering Applications of Ground Penetrating Radar: Research Perspectives in COST Action TU1208," Geophysical Research Abstracts, European Geosciences Union (EGU) General Assembly 2013, 7-12 April 2013, Vienna, Austria, article ID EGU2013-13941. [2] L. Pajewski, A. Benedetto, G. Schettini, F. Soldovieri, "Applications of GPR in archaeological prospecting and cultural heritage diagnostics: Research Perspectives in COST Action TU1208," Geophysical Research Abstracts, European Geosciences Union (EGU) General Assembly 2013, 7-12 April 2013, Vienna, Austria, article ID EGU2013-14010. [3] L. Pajewski, A. Benedetto, X. Dérobert, A. Giannopoulos, A. Loizos, G. Manacorda, M. Marciniak, C. Plati, G. Schettini, I. Trinks, "Applications of Ground Penetrating Radar in Civil Engineering - COST Action TU1208," Proc. 7th International Workshop on Advanced Ground Penetrating Radar (IWAGPR), 2-5 July 2013, Nantes, France, pp. 1-6 (INVITED). ISBN 978-1-4799-0937-7, doi:10.1109/ IWAGPR.2013.6601528). [4] L. Pajewski, A. Benedetto, "Advanced Ground Penetrating Radar: open issues and new research opportunities in Europe," Proc. 10th European Radar Conference (EuRad), 2013 European Microwave Week (EuMW), 6-11 October 2013, Nuremberg, Germany, pp. 1847-1850. [5] Proceedings of the First Action's General Meeting (Editors: L. Pajewski and A. Benedetto; Publishing House: Aracne; Rome, July 2013; 194 pp.; ISBN 978-88-548-6191-6; o.o. 978-88-548-6190-9) - available as free download on www.GPRadar.eu [6] Booklet of Participants and Institutions (Editors: L. Pajewski and A. Benedetto; Publishing House: Aracne; Rome, July 2013; 127 pp.; ISBN 978-88-548-6192-3; o.o. 978-88-548-6190-9) - available as free download on www.GPRadar.eu

  9. Dietary Supplements: Foods, Medicines, or Both? A Controversial Designation with Unspecific Legislation.

    PubMed

    Pereira, Carla; Barros, Lillian; Ferreira, Isabel C F R

    2017-01-01

    Dietary supplements have been widely used among the United States of America (USA) and the European Union (EU) population not only as a form of nutrition but also for medicinal purposes. Still, the legislation regulating these supplements remains unclear due to the fact that they can be considered as foodstuffs and/or medicinal products depending on various factors. The present review article intends to provide information concerning the variations on the definition of dietary supplements, the allowable substances on it, as well as the marketing and labelling requirements among the USA and the EU legislation. In fact, several discrepancies can be found between regulations in the USA (mainly regulated by the Food and Drugs Administration) and in the EU (principally regulated by the Food Supplements Directive or by the Directive 2001/83/EC), and even between the different Member States of the EU, with the main differences observed in new products marketing requirements. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  10. A Eu/Tb mixed lanthanide coordination polymer with rare 2D thick layers: Synthesis, characterization and ratiometric temperature sensing

    NASA Astrophysics Data System (ADS)

    Zhu, Yuanyuan; Xia, Tifeng; Zhang, Qi; Cui, Yuanjing; Yang, Yu; Qian, Guodong

    2018-03-01

    A series of lanthanide coordination polymers LnBTPTA (Ln = Eu, Tb, EuxTb1-x), was synthesized using a tricarbocylic ligand 4,4‧,4‧‧-(benzene-1,3,5-triyltris(1H-pyrazole-3,1-diyl))tribenzoic acid (H3BTPTA). X-ray single crystal analyses reveal that the asymmetric unit cell contains seven crystallographically independent metal ions and seven crystallographically independent ligands which is quite unusual. The 3D framework is comprised of 2D thick layers stacked through van der Waals force, π-π interactions and hydrogen bonding interactions. Eu0.0316Tb0.9684BTPTA presents a dual-emission of Tb3+ at 543 nm and Eu3+ at 617 nm, and the intensity ratio shows an excellent linear relationship with the temperature changing in 25-225 K. The relative sensitivity 0.45-5.12% K-1 is much higher than those have been reported in the same detection range.

  11. Education on Online Safety in Schools in Europe. Summary Report

    ERIC Educational Resources Information Center

    Education, Audiovisual and Culture Executive Agency, European Commission, 2010

    2010-01-01

    To support European Commission activities, the Eurydice network carried out a study regarding the Education on Online Safety in schools. The data collection was coordinated by the Eurydice Unit of the EU Education, Audiovisual and Culture Executive Agency (EACEA) with the collaboration of the National Eurydice Units. Participation in this study by…

  12. Crystal and electronic structures, luminescence properties of Eu 2+-doped Si 6-zAl zO zN 8-z and M ySi 6-zAl z-yO z+yN 8-z-y ( M=2Li, Mg, Ca, Sr, Ba)

    NASA Astrophysics Data System (ADS)

    Li, Y. Q.; Hirosaki, N.; Xie, R. J.; Takeda, T.; Mitomo, M.

    2008-12-01

    The crystal structure, electronic structure, and photoluminescence properties of Eu xSi 6-zAl z-xO z+xN 8-z-x ( x=0-0.1, 0< z<1) and Eu xM ySi 6-zAl z-x-yO z+x+yN 8-z-x-y ( M=2Li, Mg, Ca, Sr, Ba) have been studied. Single-phase Eu xSi 6-zAl z-xO z+xN 8-z-x can be obtained in very narrow ranges of x⩽0.06 ( z=0.15) and z<0.5 ( x=0.3), indicating that limited Eu 2+ ions can be incorporated into nitrogen-rich Si 6-zAl zO zN 8-z. The Eu 2+ ion is found to occupy the 2 b site in a hexagonal unit cell ( P6 3/ m) and directly connected by six adjacent nitrogen/oxygen atoms ranging 2.4850-2.5089 Å. The calculated host band gaps by the relativistic DV-X α method are about 5.55 and 5.45 eV (without Eu 2+ 4 f5 d levels) for x=0 and 0.013 in Eu xSi 6-zAl z-xO z+xN 8-z-x ( z=0.15), in which the top of the 5 d orbitals overlap with the Si-3 s3 p and N-2 p orbitals within the bottom of the conduction band of the host. Eu xSi 6-zAl z-xO z+xN 8-z-x shows a strong green emission with a broad Eu 2+ band centered at about 530 nm under UV to near-UV excitation range. The excitation and emission spectra are hardly modified by Eu concentration and dual-doping ions of Li and other alkaline-earth ions with Eu. Higher Eu concentrations can significantly quench the luminescence of Eu 2+ and decrease the thermal quenching temperature. In addition, the emission spectrum can only be slightly tuned to the longer wavelengths (˜529-545 nm) by increasing z within the solid solution range of z<0.5. Furthermore, the luminescence intensity of Eu xSi 6-zAl z-xO z+xN 8-z-x can be improved by increasing z and the dual-doping of Li and Ba.

  13. Tailored white light emission in Eu3+/Dy3+ doped tellurite glass phosphors containing Al3+ ions

    NASA Astrophysics Data System (ADS)

    Walas, Michalina; Piotrowski, Patryk; Lewandowski, Tomasz; Synak, Anna; Łapiński, Marcin; Sadowski, Wojciech; Kościelska, Barbara

    2018-05-01

    Tellurite glass systems modified by addition of aluminum fluoride AlF3 have been successfully synthesized as host matrices for optically active rare earth ions RE3+ (RE3+ = Eu3+, Dy3+). Samples with different Eu3+ to Dy3+ molar ratio have been studied in order to determine possibility of white light emission via UV excitation. Structural investigations confirmed amorphous character of materials whereas spectroscopic studies brought more insight into glass network's nature. FTIR results shown presence of two features related to tellurite glass matrix (in 490-935 cm-1 spectral region) and another one (940-1250 cm-1) due to aluminum addition. Especially, Al-O and Te-O-Al bonds of AlO4 tetrahedrons have been found. AlO4 units are considered as glass formers that improve network's strength and thermal resistivity against devitrification. Based on XPS studies of Al3+ photoelectron band the existence of Al-O and also Al-F bonds have been examined. Moreover, signals originating from Eu3+ and Dy3+ have been found confirming their valence state. Luminescence results revealed possibility of simultaneous UV excitation of Eu3+ and Dy3+ ions. Excitation with λexc = 390 and 393 nm resulted in white light generation starting from warm white to neutral and cool white depending on Eu3+ concentration and used excitation wavelength. Additionally, increase of decay lifetime of Eu3+ induced by Al3+ presence have been revealed based on luminescence decay analysis. Thus, tellurite glass systems modified by AlF3 and doped with Eu3+/Dy3+ may be considered as promising candidates for white light emitting sources.

  14. Transparent EuTiO3 films: a possible two-dimensional magneto-optical device

    NASA Astrophysics Data System (ADS)

    Bussmann-Holder, Annette; Roleder, Krystian; Stuhlhofer, Benjamin; Logvenov, Gennady; Lazar, Iwona; Soszyński, Andrzej; Koperski, Janusz; Simon, Arndt; Köhler, Jürgen

    2017-01-01

    The magneto-optical activity of high quality transparent thin films of insulating EuTiO3 (ETO) deposited on a thin SrTiO3 (STO) substrate, both being non-magnetic materials, are demonstrated to be a versatile tool for light modulation. The operating temperature is close to room temperature and allows for multiple device engineering. By using small magnetic fields birefringence of the samples can be switched off and on. Similarly, rotation of the sample in the field can modify its birefringence Δn. In addition, Δn can be increased by a factor of 4 in very modest fields with simultaneously enhancing the operating temperature by almost 100 K.

  15. Engineered ecosystem for on-site wastewater treatment in tropical areas.

    PubMed

    de Sá Salomão, André Luis; Marques, Marcia; Severo, Raul Gonçalves; da Cruz Roque, Odir Clécio

    2012-01-01

    There is a worldwide demand for decentralized wastewater treatment options. An on-site engineered ecosystem (EE) treatment plant was designed with a multistage approach for small wastewater generators in tropical areas. The array of treatment units included a septic tank, a submersed aerated filter, and a secondary decanter followed by three vegetated tanks containing aquatic macrophytes intercalated with one tank of algae. During 11 months of operation with a flow rate of 52 L h(-1), the system removed on average 93.2% and 92.9% of the chemical oxygen demand (COD) and volatile suspended solids (VSS) reaching final concentrations of 36.3 ± 12.7 and 13.7 ± 4.2 mg L(-1), respectively. Regarding ammonia-N (NH(4)-N) and total phosphorus (TP), the system removed on average 69.8% and 54.5% with final concentrations of 18.8 ± 9.3 and 14.0 ± 2.5 mg L(-1), respectively. The tanks with algae and macrophytes together contributed to the overall nutrient removal with 33.6% for NH(4)-N and 26.4% for TP. The final concentrations for all parameters except TP met the discharge threshold limits established by Brazilian and EU legislation. The EE was considered appropriate for the purpose for which it was created.

  16. Synthesis, crystal structures and luminescence properties of the Eu 3+-doped yttrium oxotellurates(IV) Y 2Te 4O 11 and Y 2Te 5O 13

    NASA Astrophysics Data System (ADS)

    Höss, Patrick; Osvet, Andres; Meister, Frank; Batentschuk, Miroslaw; Winnacker, Albrecht; Schleid, Thomas

    2008-10-01

    Y 2Te 4O 11:Eu 3+ and Y 2Te 5O 13:Eu 3+ single crystals in sub-millimeter scale were synthesized from the binary oxides (Y 2O 3, Eu 2O 3 and TeO 2) using CsCl as fluxing agent. Crystallographic structures of the undoped yttrium oxotellurates(IV) Y 2Te 4O 11 and Y 2Te 5O 13 have been determined and refined from single-crystal X-ray diffraction data. In Y 2Te 4O 11, a layered structure is present where the reticulated sheets consisting of edge-sharing [YO 8] 13- polyhedra are interconnected by the oxotellurate(IV) units, whereas in Y 2Te 5O 13 only double chains of condensed yttrium-oxygen polyhedra with coordination numbers of 7 and 8 are left, now linked in two crystallographic directions by the oxotellurate(IV) entities. The Eu 3+ luminescence spectra and the decay time from different energy levels of the doped compounds were investigated and all detected emission levels were identified. Luminescence properties of the Eu 3+ cations have been interpreted in consideration of the now accessible detailed crystallographic data of the yttrium compounds, providing the possibility to examine the influence of the local symmetry of the oxygen coordination spheres.

  17. Clinical trial designs to obtain marketing authorization of drugs for haematological malignancy in Japan, the EU and the US.

    PubMed

    Nagai, Sumimasa; Ozawa, Keiya

    2016-07-01

    Differences in regulatory actions between Japan, the European Union (EU) and the United States (US) regarding the approval date and primary endpoints of pivotal trials have never been analysed comprehensively. This study aimed to examine such differences in haematological malignancy indications not only in applications for new molecular entity agents but also in supplemental applications for additional indications. A total of 101 haematological malignancy indications were examined for 58 drugs. Only 30 indications were approved by the regulatory agencies of all three regions with 25, 9 and 67 indications being first approved in Japan, the EU and the US, respectively. Regarding the 18 indications approved only in the US, 13 were approved based on results of single-arm trials. The approval of all nine indications approved first in the EU was based on results of comparative trials. The primary endpoints were different between the EU and the US in 4 of 49 indications approved by both regulatory agencies, all of which were approved earlier in the US than in the EU. This analysis shows that the US Food and Drug Administration has taken the most active attitude to acceptance of surrogate endpoints in single-arm trials. Therefore, not only shorter review time but also this attitude may lead to earlier approval in US. © 2016 John Wiley & Sons Ltd.

  18. Possible health impacts of Bt toxins and residues from spraying with complementary herbicides in genetically engineered soybeans and risk assessment as performed by the European Food Safety Authority EFSA.

    PubMed

    Then, Christoph; Bauer-Panskus, Andreas

    2017-01-01

    MON89788 was the first genetically engineered soybean worldwide to express a Bt toxin. Under the brand name Intacta, Monsanto subsequently engineered a stacked trait soybean using MON89788 and MON87701-this stacked soybean expresses an insecticidal toxin and is, in addition, tolerant to glyphosate. After undergoing risk assessment by the European Food Safety Authority (EFSA), the stacked event was authorised for import into the EU in June 2012, including for use in food and feed. This review discusses the health risks associated with Bt toxins present in these genetically engineered plants and the residues left from spraying with the complementary herbicide. We have compared the opinion published by EFSA [1] with findings from other publications in the scientific literature. It is evident that there are several issues that EFSA did not consider in detail and which will need further assessment: (1) There are potential combinatorial effects between plant components and other impact factors that might enhance toxicity. (2) It is known that Bt toxins have immunogenic properties; since soybeans naturally contain many allergens, these immunogenic properties raise specific questions. (3) Fully evaluated and reliable protocols for measuring the Bt concentration in the plants are needed, in addition to a comprehensive set of data on gene expression under varying environmental conditions. (4) Specific attention should be paid to the herbicide residues and their interaction with Bt toxins. The case of the Intacta soybeans highlights several regulatory problems with Bt soybean plants in the EU. Moreover, many of the issues raised also concern other genetically engineered plants that express insecticidal proteins, or are engineered to be resistant to herbicides, or have those two types of traits combined in stacked events. It remains a matter of debate whether the standards currently applied by the risk assessor, EFSA, and the risk manager, the EU Commission, meet the standards for risk analysis defined in EU regulations such as 1829/2003 and Directive 2001/18. While this publication cannot provide a final conclusion, it allows the development of some robust hypotheses that should be investigated further before such plants can be considered to be safe for health and the environment. In general, the concept of comparative risk assessment needs some major revision. Priority should be given to developing more targeted approaches. As shown in the case of Intacta, these approaches should include: (i) systematic investigation of interactions between the plant genome and environmental stressors as well as their impact on gene expression and plant composition; (ii) detailed investigations of the toxicity of Bt toxins; (iii) assessment of combinatorial effects taking into account long-term effects and the residues from spraying with complementary herbicides; (iv) investigation into the impact on the immune and hormonal systems and (v) investigation of the impact on the intestinal microbiome after consumption. Further and in general, stacked events displaying a high degree of complexity due to possible interactions should not undergo a lower level of risk assessment than the parental plants.

  19. Using zircon (U-Th)/He damage-diffusivity patterns to quantify detachment-related basement exhumation in the Mecca Hills, CA

    NASA Astrophysics Data System (ADS)

    Moser, A. C.; Ault, A. K.; Evans, J. P.; Reiners, P. W.; Stearns, M.; Guenthner, W.

    2017-12-01

    Exposures of gneiss and Orocopia Schist (OS) in the Mecca Hills, California, adjacent to the southernmost San Andreas Fault system, preserve the exhumation history of Oligocene detachment faulting. We investigate the duration, magnitude, and mechanisms of exhumation of these units at regional and local scales using in situ U-Pb zircon dating (n = 248), (U-Th)/He (He) thermochronometry (n = 39), and He date-effective U (eU) patterns. Zircons with variable preserved visual metamictization were targeted for He analyses to purposefully build a dataset with a range in eU concentration and zircon He closure temperatures, as well as induce a He date-eU correlation. Analyzed zircon crystals range from clear and transparent to purple-brown and translucent in each sample. Zircon cathodoluminescence images reveal oscillatory and sector chemical zoning. Each sample contains a population of largely Proterozoic U-Pb dates implying some grains accumulated radiation damage since 1.9-1.1 Ga. Zircon (U-Th)/He dates from seven samples of OS and gneiss yield a mean date of 24 ± 3.5 Ma (n = 32) and uniform dates over an 90-2950 ppm eU range. One gneiss sample yields a mean date of 65 ± 5.6 Ma (n = 7) over a limited eU spread ( 500-950 ppm). Mean zircon He dates from these two units overlap, but dates are broadly younger in northeastern exposures dominated by OS. Preliminary thermal history simulations integrating zircon U-Pb data, He date-eU patterns, and independent geologic constraints require at least 200 °C of cooling through the zircon He partial retention zone 30-21 Ma and show that the pre-70 Ma thermal history does not affect the predicted date-eU correlation. This shared rapid cooling history documented in the OS and gneiss imply these units were juxtaposed prior to 30 Ma and exhumed as a coherent structural block within the footwall of the Orocopia Mountains Detachment Fault in the Mecca Hills. Spatio-temporal variation in mean zircon He dates may delineate time-transgressive cooling of these units as they exhumed. Zircon textures and overall invariant He dates regardless of eU imply that visual metamictization persists in zircons at temperatures >200 °C and indicates these grains experienced a thermal history characterized by temperatures that preserved visual damage but fully induced He loss in the crystals prior to exhumation.

  20. Business oriented EU human cell and tissue product legislation will adversely impact Member States' health care systems.

    PubMed

    Pirnay, Jean-Paul; Vanderkelen, Alain; De Vos, Daniel; Draye, Jean-Pierre; Rose, Thomas; Ceulemans, Carl; Ectors, Nadine; Huys, Isabelle; Jennes, Serge; Verbeken, Gilbert

    2013-12-01

    The transplantation of conventional human cell and tissue grafts, such as heart valve replacements and skin for severely burnt patients, has saved many lives over the last decades. The late eighties saw the emergence of tissue engineering with the focus on the development of biological substitutes that restore or improve tissue function. In the nineties, at the height of the tissue engineering hype, industry incited policymakers to create a European regulatory environment, which would facilitate the emergence of a strong single market for tissue engineered products and their starting materials (human cells and tissues). In this paper we analyze the elaboration process of this new European Union (EU) human cell and tissue product regulatory regime-i.e. the EU Cell and Tissue Directives (EUCTDs) and the Advanced Therapy Medicinal Product (ATMP) Regulation and evaluate its impact on Member States' health care systems. We demonstrate that the successful lobbying on key areas of regulatory and policy processes by industry, in congruence with Europe's risk aversion and urge to promote growth and jobs, led to excessively business oriented legislation. Expensive industry oriented requirements were introduced and contentious social and ethical issues were excluded. We found indications that this new EU safety and health legislation will adversely impact Member States' health care systems; since 30 December 2012 (the end of the ATMP transitional period) there is a clear threat to the sustainability of some lifesaving and established ATMPs that were provided by public health institutions and small and medium-sized enterprises under the frame of the EUCTDs. In the light of the current economic crisis it is not clear how social security systems will cope with the inflation of costs associated with this new regulatory regime and how priorities will be set with regard to reimbursement decisions. We argue that the ATMP Regulation should urgently be revised to focus on delivering affordable therapies to all who are in need of them and this without necessarily going to the market. The most rapid and elegant way to achieve this would be for the European Commission to publish an interpretative document on "placing on the market of ATMPs," which keeps tailor-made and niche ATMPs outside of the scope of the medicinal product regulation.

  1. Comparing motor-vehicle crash risk of EU and US vehicles.

    PubMed

    Flannagan, Carol A C; Bálint, András; Klinich, Kathleen D; Sander, Ulrich; Manary, Miriam A; Cuny, Sophie; McCarthy, Michael; Phan, Vuthy; Wallbank, Caroline; Green, Paul E; Sui, Bo; Forsman, Åsa; Fagerlind, Helen

    2018-08-01

    This study examined the hypotheses that passenger vehicles meeting European Union (EU) safety standards have similar crashworthiness to United States (US) -regulated vehicles in the US driving environment, and vice versa. The first step involved identifying appropriate databases of US and EU crashes that include in-depth crash information, such as estimation of crash severity using Delta-V and injury outcome based on medical records. The next step was to harmonize variable definitions and sampling criteria so that the EU data could be combined and compared to the US data using the same or equivalent parameters. Logistic regression models of the risk of a Maximum injury according to the Abbreviated Injury Scale of 3 or greater, or fatality (MAIS3+F) in EU-regulated and US-regulated vehicles were constructed. The injury risk predictions of the EU model and the US model were each applied to both the US and EU standard crash populations. Frontal, near-side, and far-side crashes were analyzed together (termed "front/side crashes") and a separate model was developed for rollover crashes. For the front/side model applied to the US standard population, the mean estimated risk for the US-vehicle model is 0.035 (sd = 0.012), and the mean estimated risk for the EU-vehicle model is 0.023 (sd = 0.016). When applied to the EU front/side population, the US model predicted a 0.065 risk (sd = 0.027), and the EU model predicted a 0.052 risk (sd = 0.025). For the rollover model applied to the US standard population, the US model predicted a risk of 0.071 (sd = 0.024), and the EU model predicted 0.128 risk (sd = 0.057). When applied to the EU rollover standard population, the US model predicted a 0.067 risk (sd = 0.024), and the EU model predicted 0.103 risk (sd = 0.040). The results based on these methods indicate that EU vehicles most likely have a lower risk of MAIS3+F injury in front/side impacts, while US vehicles most likely have a lower risk of MAIS3+F injury in llroovers. These results should be interpreted with an understanding of the uncertainty of the estimates, the study limitations, and our recommendations for further study detailed in the report. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

  2. Study of crystal structure and unique photoluminescence properties of Eu2-xFexO3 (x = 0 - 0.5) orthoferrites

    NASA Astrophysics Data System (ADS)

    Dhilip, M.; Anbarasu, V.; Kumar, K. Saravana; Sivakumar, K.

    2018-04-01

    A series of Europium orthoferrites, Eu2-xFexO3 (x = 0 - 0.5) are successfully prepared by employing solid state reaction technique. The structural analysis through powder X-Ray diffraction technique reveals the multiphase formation of all the prepared compounds. Further, the unit cell visualization of all the prepared compounds confirms the change of crystal structure from cubic to orthorhombic phase. The crystal structure analysis confirms the typical framework of Eu - Fe - O chains with unprecedented ratio of Eu3+ and Fe3+ ions. The optical properties of prepared compounds are investigated using photoluminescence (PL) analysis. Upon excitation at 495 nm wavelength, the emission spectrum of prepared compounds exhibits a broad band in the range of 500-700nm with maximum intensity peak at 548 nm (Blue - 2.26eV). Hence, the substitution of Fe3+ ion yields with intrinsic blue photoluminescence (5D0 → 7F0) of Eu3+ and is easily shielded by the substitution of Fe3+ which may be due to the closer conduction band gap of Eu3+ (2.26 eV) with Fe3+ (2.67 eV). The schematic energy level diagram for Fe3+ in the Eu3+ host matrix has been proposed for the better understanding of photoluminescence processes. The variation of intensity of PL peak between 500 and 700 nm for the substitution of Fe in the range of x = 0 - 0.5 yields with interesting optical properties for exploring new phosphor materials for optoelectronic device fabrications.

  3. 76 FR 33631 - Energy Conservation Program: Test Procedures for Walk-In Coolers and Walk-In Freezers

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-09

    ... a multiplex condensing system. U-factor means the heat transmission in a unit time through a unit... 550 08 19 or http://www.cen.eu/ . (1) DIN EN 13164:2009-02, (``DIN EN 13164''), Thermal insulation... 13165''), Thermal insulation products for buildings--Factory made rigid polyurethane foam (PUR) products...

  4. Exhaust emissions reduction from diesel engine using combined Annona-Eucalyptus oil blends and antioxidant additive

    NASA Astrophysics Data System (ADS)

    Senthil, R.; Silambarasan, R.; Pranesh, G.

    2017-03-01

    The limited resources, rising petroleum prices and depletion of fossil fuel have now become a matter of great concern. Hence, there is an urgent need for researchers to find some alternate fuels which are capable of substituting partly or wholly the higher demanded conventional diesel fuel. Lot of research work has been conducted on diesel engine using biodiesel and its blends with diesel as an alternate fuel. Very few works have been done with combination of biodiesel-Eucalypts oil without neat diesel and this leads to lots of scope in this area. The aim of the present study is to analyze the performance and emission characteristics of a single cylinder, direct injection, compression ignition engine using eucalyptus oil-biodiesel as fuel. The presence of eucalyptus oil in the blend reduces the viscosity and improves the volatility of the blends. The methyl ester of Annona oil is blended with eucalypts oil in 10, 20, 30, 40 and 50 %. The performance and emission characteristics are evaluated by operating the engine at different loads. The performance characteristics such as brake thermal efficiency, brake specific fuel consumption and exhaust gas temperature are evaluated. The emission constituents measured are Carbon monoxide (CO), unburned hydrocarbons (HC), Oxides of nitrogen (NOx) and Smoke. It is found that A50-Eu50 (50 Annona + 50 % Eucalyptus oil) blend showed better performance and reduction in exhaust emissions. But, it showed a very marginal increase in NOx emission when compared to that of diesel. Therefore, in order to reduce the NOx emission, antioxidant additive (A-tocopherol acetate) is mixed with Annona-Eucalyptus oil blends in various proportions by which NOx emission is reduced. Hence, A50-Eu50 blend can be used as an alternate fuel for diesel engine without any modifications.

  5. Wide disparity of clinical genetics services and EU rare disease research funding across Europe.

    PubMed

    Lynch, Sally Ann; Borg, Isabella

    2016-04-01

    The origins of clinical genetics services vary throughout Europe with some emerging from paediatric medicine and others from an academic laboratory setting. In 2011, the cross-border patients' rights directive recommended the creation of European Research Networks (ERNs) to improve patient care throughout EU. In 2013, the EU recommendation on the care for rare diseases came into place. The process of designating EU centres of expertise in rare diseases is being implemented to allow centres to enter ERNs. Hence, this is an opportune time to reflect on the current status of genetic services and research funding throughout Europe as 80 % of rare diseases have a genetic origin. Our aims were to determine (a) whether EU countries are prepared in terms of appropriate clinical genetic staffing to fulfil the European Union Committee of Experts on Rare Diseases (EUCERD) criteria that will allow national centres to be designated as centres of expertise, (b) which EU countries are successful in grant submissions to EU rare disease research funding and (c) country of origin of researchers from the EU presenting their research work as a spoken presentation at the European Society of Human Genetics annual conference. Our results show there is wide disparity of staffing levels per head of population in clinical genetics units throughout Europe. EU rare disease research funding is not being distributed equitably and the opportunity to present research is skewed with many countries not achieving spoken presentations despite abstract submissions. Inequity in the care of patients with rare diseases exists in Europe. Many countries will struggle to designate centres of expertise as their staffing mix and levels will not meet the EUCERD criteria which may prevent them from entering ERNs. The establishment of a small number of centres of expertise centrally, which is welcome, should not occur at the expense of an overall improvement in EU rare disease patient care. Caution should be observed to ensure that the inequity gap that already exists does not widen with the development of ERNs.

  6. Single crystal growth and physical properties of the new ternary compound Eu2Mg4Si3

    NASA Astrophysics Data System (ADS)

    Numakura, Ryosuke; Iizuka, Ryosuke; Michimura, Shinji; Katano, Susumu; Kosaka, Masashi

    2018-05-01

    We have studied the magnetic and electrical properties of new ternary europium magnesium silicide Eu2Mg4Si3. The single crystalline Eu2Mg4Si3 has been prepared by the Mg self-flux method. The compound crystalizes in the hexagonal Hf2Co4P3-type structure with space group P 6 bar 2 m with unit cell parameters a = 14.78 (3) Å and c = 4.434 (6) Å . Magnetic, electrical, and thermal properties indicate that the system undergoes two successive phase transitions, occurring at TN1 = 9.6 K and TN2 = 8.4 K . The estimated effective magnetic moment is close to the moment of free Eu2+ ion. The electrical resistivity data ρ (T) for Eu2Mg4Si3 show a metallic-like behavior from room temperature down to about 100 K. However, the ρ (T) data exhibit a notable upturn below 80 K and a maximum around TN1 and then suddenly decrease with decreasing temperature. These features are strongly suppressed by applying magnetic fields and a metallic temperature dependence eventually exhibits over the whole temperature range in a magnetic field of 30 kOe. Such behavior is observed in some magnetoresistive compounds.

  7. Regulating interface science healthcare products: myths and uncertainties.

    PubMed

    Bravery, Christopher A

    2010-12-06

    Whenever new technology emerges it brings with it concerns and uncertainties about whether or how it will need to be regulated, particularly when it is applied to human healthcare. Drawing on the recent history in the European Union (EU) of the regulation of cell-based medicinal products, and in particular tissue-engineered products, this paper explores the myths that persist around their regulation and speculates on whether the existing regulatory landscape in the EU is flexible enough to incorporate nanotechnology and other new technologies into healthcare products. By untangling these myths a number of clear conclusions are revealed that, when considered in the context of risk-benefit, make it clear that what hinders the uptake of new technology is not regulatory process but basic science.

  8. Virtual Power Electronics: Novel Software Tools for Design, Modeling and Education

    NASA Astrophysics Data System (ADS)

    Hamar, Janos; Nagy, István; Funato, Hirohito; Ogasawara, Satoshi; Dranga, Octavian; Nishida, Yasuyuki

    The current paper is dedicated to present browser-based multimedia-rich software tools and e-learning curriculum to support the design and modeling process of power electronics circuits and to explain sometimes rather sophisticated phenomena. Two projects will be discussed. The so-called Inetele project is financed by the Leonardo da Vinci program of the European Union (EU). It is a collaborative project between numerous EU universities and institutes to develop state-of-the art curriculum in Electrical Engineering. Another cooperative project with participation of Japanese, European and Australian institutes focuses especially on developing e-learning curriculum, interactive design and modeling tools, furthermore on development of a virtual laboratory. Snapshots from these two projects will be presented.

  9. Synthesis and structural characterization of the Zintl phases Na{sub 3}Ca{sub 3}TrPn{sub 4}, Na{sub 3}Sr{sub 3}TrPn{sub 4}, and Na{sub 3}Eu{sub 3}TrPn{sub 4} (Tr=Al, Ga, In; Pn=P, As, Sb)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wang, Yi; Suen, Nian-Tzu; College of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou 225002

    15 new quaternary Zintl phases have been synthesized by solid-state reactions from the respective elements, and their structures have been determined by single-crystal X-ray diffraction. Na{sub 3}E{sub 3}TrPn{sub 4} (E=Ca, Sr, Eu; Tr=Al, Ga, In; Pn=P, As, Sb) crystallize in the hexagonal crystal system with the non-centrosymmetric space group P6{sub 3}mc (No. 186). The structure represents a variant of the K{sub 6}HgS{sub 4} structure type (Pearson index hP22) and features [TrPn{sub 4}]{sup 9–} tetrahedral units, surrounded by Na{sup +} and Ca{sup 2+}, Sr{sup 2+}, Eu{sup 2+} cations. The nominal formula rationalization [Na{sup +}]{sub 3}[E{sup 2+}]{sub 3}[TrPn{sub 4}]{sup 9–} follows themore » octet rule, suggesting closed-shell configurations for all atoms and intrinsic semiconducting behavior. However, structure refinements for several members hint at disorder and mixing of cations that potentially counteract the optimal valence electron count. - Graphical abstract: The hexagonal, non-centrosymmetric structure of Na{sub 3}E{sub 3}TrPn{sub 4} (E=Ca, Sr, Eu; Tr=Al, Ga, In; Pn=P, As, Sb) features [TrPn{sub 4}]{sup 9–} tetrahedral units, surrounded by Na{sup +} and Ca{sup 2+}, Sr{sup 2+}, Eu{sup 2+} cations. - Highlights: • 15 quaternary phosphides, arsenides, and antimonides are synthesized and structurally characterized. • The structure is a variant of the hexagonal K{sub 6}HgS{sub 4}-type, with distinctive pattern for the cations. • Occupational and/or positional disorder of yet unknown origin exists for some members of the series.« less

  10. Hardware Assessment in Support of the Dynamic Power Convertor Development Effort

    NASA Technical Reports Server (NTRS)

    Wilson, Scott D.; Oriti, Sal M.; Schifer, Nicholas A.

    2017-01-01

    Stirling Radioisotope Power Systems (RPS) are being developed by NASA's RPS Program in collaboration with the U.S. Department of Energy (DOE). Efforts ranging from 2001 to 2015 enabled development of the Technology Demonstration Convertor (TDC) for use in the 110-watt Stirling Radioisotope Generator (SRG-110) and the Advanced Stirling Convertor (ASC) for use in the Advanced Stirling Radioisotope Generator (ASRG). The DOE selected Lockheed Martin Space Systems Company (LMSSC) as the system integration contractor for both flight development efforts. The SRG-110 housed two TDCs fabricated by Infinia and resulted in the production of 16x demonstration units and 2x engineering units. The project was redirected in 2006 to make use of a more efficient and lower mass ASCs under development by Sunpower Inc. The DOE managed the flight contract with LMSSC and subcontractor Sunpower Inc. from 2007 to 2013 to build the ASRG, with support from NASA Glenn Research Center (GRC). Sunpower Inc. held two parallel contracts to produce ASCs, one with Lockheed Martin to produce ASC-F flight units and one with GRC for the production of ASC-E3 engineering unit pathfinders that were used to refine the flight design and production processes. The DOE initiated termination of the ASRG contract in late 2013. After ASRG had ended, GRC completed characterization testing of the ASRG Engineering Unit #2 (EU2) and the GRC contract with Sunpower was also completed. The NASA RPS Program Office has recently initiated a new Dynamic Power Conversion development effort which includes the potential maturation of Stirling, Brayton, and Rankine power convertors for the next generation of RPS. The effort started with the request for proposal and review of submits. Contracts are anticipated for release in 2017 and will initially focus on a design phase prior to fabrication and testing. This new effort will focus on robustness in addition to high efficiency, specific power, and reliability. Also, some requirements introduced during the ASRG contract have also been included in the new effort, such as constant lateral loading. Due to the focus on robustness and new requirements relative to the older TDC design, the Stirling Cycle Development Project has initiated an assessment of government owned hardware to help inform requirements evolution and evaluation of future designs. While lessons learned from the ASRG flight development project have been taken into consideration, the evaluation of the TDC design had not been completed for some existing environments or relatively new requirements. To further assess the TDC design, a series of tasks were initiated to evaluate degradation for units that have operated unattended for over 105,000 hours, demonstrate robustness to a random vibration environment, characterize and evaluate performance for varying lateral load profiles. The status for each task are described.

  11. Telework for persons with disabilities in the E.U. and the U.S.A: what can we learn from each other?

    PubMed

    Schopp, Laura H

    2004-01-01

    Persons with disabilities represent a growing population in both the European Union (EU) and the United States (USA). The ability to work is a key component in achieving independence and full inclusion in society, and employability is increasingly seen as an important outcome variable for studies in health and disability. However, persons with disabilities face considerable challenges in returning to work due to barriers related to transportation, job changes after disability, lack of support services in the workplace, and related barriers. Telework, or work from a distance, may help to mitigate these obstacles, while expanding the range of work options available for persons with disabilities. The EU has made substantial policy progress to support telework, but persons with disabilities have had only limited long-term success in telework initiatives due to lack of work support services. The USA has generally strong support services but lacks telework policy infrastructure. The EU and the USA can benefit from collaborative work to enhance their complementary strengths.

  12. Reducing the risk of invasive forest pests and pathogens: Combining legislation, targeted management and public awareness.

    PubMed

    Klapwijk, Maartje J; Hopkins, Anna J M; Eriksson, Louise; Pettersson, Maria; Schroeder, Martin; Lindelöw, Åke; Rönnberg, Jonas; Keskitalo, E Carina H; Kenis, Marc

    2016-02-01

    Intensifying global trade will result in increased numbers of plant pest and pathogen species inadvertently being transported along with cargo. This paper examines current mechanisms for prevention and management of potential introductions of forest insect pests and pathogens in the European Union (EU). Current European legislation has not been found sufficient in preventing invasion, establishment and spread of pest and pathogen species within the EU. Costs associated with future invasions are difficult to estimate but past invasions have led to negative economic impacts in the invaded country. The challenge is combining free trade and free movement of products (within the EU) with protection against invasive pests and pathogens. Public awareness may mobilise the public for prevention and detection of potential invasions and, simultaneously, increase support for eradication and control measures. We recommend focus on commodities in addition to pathways, an approach within the EU using a centralised response unit and, critically, to engage the general public in the battle against establishment and spread of these harmful pests and pathogens.

  13. Support for international trade law: The US and the EU compared

    PubMed Central

    Eckhardt, Jappe; Elsig, Manfred

    2015-01-01

    In this article we compare United States and European Union support for bilateral and multilateral international trade law. We assess the support for international law of both trading blocs by focusing on the following four dimensions: leadership, consent, compliance and internalization. Although we find strong support for international trade law from both the US and the EU in general, we also witness some variation, most notably in relation to the design of preferential trade agreements (PTAs) and compliance with World Trade Organization (WTO) law. Turning to explaining these (moderate) differences, we argue that outcomes in US trade policy can best be explained by a domestic political factor, namely the direct influence of interest groups. Although the involvement of societal interests also goes a long way in explaining EU behavior, it does not tell the entire story. We posit that, in EU trade policy, institutions are a particular conditioning factor that needs to be stressed. Moreover, we suggest that foreign policy considerations in managing trade relations have characterized EU’s support for international trade law. PMID:27867316

  14. 75 FR 69080 - Federal Travel Regulation (FTR)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-10

    ... GENERAL SERVICES ADMINISTRATION Federal Travel Regulation (FTR) Fly America Act; United States and European Union ``Open Skies'' Air Transport Agreement (US-EU Open Skies Agreement) AGENCY: Office of Governmentwide Policy, General Services Administration (GSA). [[Page 69081

  15. 75 FR 52751 - Office of Global Health Affairs; Trans-Atlantic Task Force on Antimicrobial Resistance (TATFAR)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-27

    .... SUPPLEMENTARY INFORMATION: 1. Background On November 3, 2009, the United States and the European Union (EU... and the European Union could have the most impact, keeping in mind that the work of the TATFAR will be.... Department of Health and Human Services for the United States and from the European Commission, European...

  16. Towards the Learning Region: Education and Regional Innovation in the European Union and the United States. CEDEFOP Reference Document.

    ERIC Educational Resources Information Center

    Nyhan, Barry, Ed.; Attwell, Graham, Ed.; Deitmer, Ludger, Ed.

    This book provides an overview of innovative education practices throughout regions in the United States (US) and Europe. It contains 16 papers written by experts from the educational, economic, and regional development fields in the US and the European Union (EU). Introductory materials are: a foreword (David O'Sullivan); preface (Stavros…

  17. A Permanent Automated Real-Time Passive Acoustic Monitoring System for Bottlenose Dolphin Conservation in the Mediterranean Sea.

    PubMed

    Brunoldi, Marco; Bozzini, Giorgio; Casale, Alessandra; Corvisiero, Pietro; Grosso, Daniele; Magnoli, Nicodemo; Alessi, Jessica; Bianchi, Carlo Nike; Mandich, Alberta; Morri, Carla; Povero, Paolo; Wurtz, Maurizio; Melchiorre, Christian; Viano, Gianni; Cappanera, Valentina; Fanciulli, Giorgio; Bei, Massimiliano; Stasi, Nicola; Taiuti, Mauro

    2016-01-01

    Within the framework of the EU Life+ project named LIFE09 NAT/IT/000190 ARION, a permanent automated real-time passive acoustic monitoring system for the improvement of the conservation status of the transient and resident population of bottlenose dolphin (Tursiops truncatus) has been implemented and installed in the Portofino Marine Protected Area (MPA), Ligurian Sea. The system is able to detect the simultaneous presence of dolphins and boats in the area and to give their position in real time. This information is used to prevent collisions by diffusing warning messages to all the categories involved (tourists, professional fishermen and so on). The system consists of two gps-synchronized acoustic units, based on a particular type of marine buoy (elastic beacon), deployed about 1 km off the Portofino headland. Each one is equipped with a four-hydrophone array and an onboard acquisition system which can record the typical social communication whistles emitted by the dolphins and the sound emitted by boat engines. Signals are pre-filtered, digitized and then broadcast to the ground station via wi-fi. The raw data are elaborated to get the direction of the acoustic target to each unit, and hence the position of dolphins and boats in real time by triangulation.

  18. A Permanent Automated Real-Time Passive Acoustic Monitoring System for Bottlenose Dolphin Conservation in the Mediterranean Sea

    PubMed Central

    Brunoldi, Marco; Bozzini, Giorgio; Casale, Alessandra; Corvisiero, Pietro; Grosso, Daniele; Magnoli, Nicodemo; Alessi, Jessica; Bianchi, Carlo Nike; Mandich, Alberta; Morri, Carla; Povero, Paolo; Wurtz, Maurizio; Melchiorre, Christian; Viano, Gianni; Cappanera, Valentina; Fanciulli, Giorgio; Bei, Massimiliano; Stasi, Nicola; Taiuti, Mauro

    2016-01-01

    Within the framework of the EU Life+ project named LIFE09 NAT/IT/000190 ARION, a permanent automated real-time passive acoustic monitoring system for the improvement of the conservation status of the transient and resident population of bottlenose dolphin (Tursiops truncatus) has been implemented and installed in the Portofino Marine Protected Area (MPA), Ligurian Sea. The system is able to detect the simultaneous presence of dolphins and boats in the area and to give their position in real time. This information is used to prevent collisions by diffusing warning messages to all the categories involved (tourists, professional fishermen and so on). The system consists of two gps-synchronized acoustic units, based on a particular type of marine buoy (elastic beacon), deployed about 1 km off the Portofino headland. Each one is equipped with a four-hydrophone array and an onboard acquisition system which can record the typical social communication whistles emitted by the dolphins and the sound emitted by boat engines. Signals are pre-filtered, digitized and then broadcast to the ground station via wi-fi. The raw data are elaborated to get the direction of the acoustic target to each unit, and hence the position of dolphins and boats in real time by triangulation. PMID:26789265

  19. Surface-Engineered Multifunctional Eu:Gd2O3 Nanoplates for Targeted and pH-Responsive Drug Delivery and Imaging Applications.

    PubMed

    Saha, Arindam; Mohanta, Subas Chandra; Deka, Kashmiri; Deb, Pritam; Devi, Parukuttyamma Sujatha

    2017-02-01

    In this paper, we report the synthesis of surface-engineered multifunctional Eu:Gd 2 O 3 triangular nanoplates with small size and uniform shape via a high-temperature solvothermal technique. Surface engineering has been performed by a one-step polyacrylate coating, followed by controlled conjugation chemistry. This creates the desired number of surface functional groups that can be used to attach folic acid as a targeting ligand on the nanoparticle surface. To specifically deliver the drug molecules in the nucleus, the folate density on the nanoparticle surface has been kept low. We have also modified the drug molecules with terminal double bond and ester linkage for the easy conjugation of nanoparticles. The nanoparticle surface was further modified with free thiols to specifically attach the modified drug molecules with a pH-responsive feature. High drug loading has been encountered for both hydrophilic drug daunorubicin (∼69% loading) and hydrophobic drug curcumin (∼75% loading) with excellent pH-responsive drug release. These nanoparticles have also been used as imaging probes in fluorescence imaging. Some preliminary experiments to evaluate their application in magnetic resonance imaging have also been explored. A detailed fluorescence imaging study has confirmed the efficient delivery of drugs to the nuclei of cancer cells with a high cytotoxic effect. Synthesized surface-engineered nanomaterials having small hydrodynamic size, excellent colloidal stability, and high drug-loading capacity, along with targeted and pH-responsive delivery of dual drugs to the cancer cells, will be potential nanobiomaterials for various biomedical applications.

  20. Physical Vapor Deposition and Defect Engineering of Europium Doped Lutetium Oxide

    NASA Astrophysics Data System (ADS)

    Gillard, Scott James

    Lutetium oxide doped with europium (Lu2O3:Eu 3+) has been established as a promising scintillator material with properties that are advantageous when compared to other scintillators such as cesium iodide doped with thallium (CsI:Tl). Due to high X-ray attenuation characteristics, Lu2O3:Eu3+ is an attractive material for use in high resolution digital X-ray imaging systems. However, challenges still remain especially in the area of light output for Lu 2O3:Eu3+. Processing by physical vapor deposition (PVD) and manipulation of oxygen defect structure was explored in order to better understand the effect on the scintillation phenomena. PVD results were obtained using high temperature radio frequency sputtering (RF) and pulsed laser deposition (PLD) systems. Characterization of light output by radial noise power spectrum density measurements revealed that high temperature RF films were superior to those obtained using PLD. Optimization of sputtered films based on light output over a range of process parameters, namely temperature, power, pressure, and substrate orientation was investigated. Parameterization of deposition conditions revealed that: 75 watts, 10.00 mtorr, and 800°C were optimum conditions for Lu2O3:Eu 3+ films. Manipulation of anionic defect structure in similar material systems has been shown to improve scintillation response. Similar methods for Lu 2O3:Eu3+ were explored for hot pressed samples of Lu2O3:Eu3+; via controlled atmosphere annealing, and use of extrinsic co-doping with calcium. The controlled atmosphere experiments established the importance of oxygen defect structure within Lu 2O3:Eu3+ and showed that fully oxidized samples were preferred for light output. The second method utilized co-doping by the addition of calcium which induced oxygen vacancies and by Frenkel equilibrium changed the oxygen interstitial population within the Lu2O 3:Eu3+ structure. The addition of calcium was investigated and revealed that scintillation was improved with a maximum response occurring at 340ppm of calcium. PVD optimization and co-doping experimental results provided a template for the use of calcium co-doped Lu2O3 :Eu3+ targets for deposition of films. Preliminary deposition results were promising and revealed that small additions (around 550 ppm) of calcium resulted in better activator efficiency. Calcium co-doped films have a predicted increase in the light yield greater than 14% when compared to analogous un-doped Lu2O3:Eu3+ films at 60keV.

  1. Optimization of the Sensitization Process and Stability of Octadentate Eu(III) 1,2-HOPO Complexes

    PubMed Central

    2016-01-01

    The synthesis of a series of octadentate ligands containing the 1-hydroxypyridin-2-one (1,2-HOPO) group in complex with europium(III) is reported. Within this series, the central bridge connecting two diethylenetriamine units linked to two 1,2-HOPO chromophores at the extremities (5-LIN-1,2-HOPO) is varied from a short ethylene chain (H(2,2)-1,2-HOPO) to a long pentaethylene oxide chain (H(17O5,2)-1,2-HOPO). The thermodynamic stability of the europium complexes has been studied and reveals these complexes may be effective for biological measurements. Extension of the central bridge results in exclusion of the inner-sphere water molecule observed for [Eu(H(2,2)-1,2-HOPO)]− going from a nonacoordinated to an octacoordinated Eu(III) ion. With the longer chain length ligands, the complexes display increased luminescence properties in aqueous medium with an optimum of 20% luminescence quantum yield for the [Eu(H(17O5,2)-1,2-HOPO)]− complex. The luminescence properties for [Eu(H(14O4,2)-1,2-HOPO)]− and [Eu(H(17O5,2)-1,2-HOPO)]− are better than that of the model bis-tetradentate [Eu(5LINMe-1,2-HOPO)2]− complex, suggesting a different geometry around the metal center despite the geometric freedom allowed by the longer central chain in the H(mOn,2) scaffold. These differences are also evidenced by examining the luminescence spectra at room temperature and at 77 K and by calculating the luminescence kinetic parameters of the europium complexes. PMID:26151082

  2. Trap Depth Engineering of SrSi2O2N2:Ln2+,Ln3+ (Ln2+ = Yb, Eu; Ln3+ = Dy, Ho, Er) Persistent Luminescence Materials for Information Storage Applications.

    PubMed

    Zhuang, Yixi; Lv, Ying; Wang, Le; Chen, Wenwei; Zhou, Tian-Liang; Takeda, Takashi; Hirosaki, Naoto; Xie, Rong-Jun

    2018-01-17

    Deep-trap persistent luminescence materials exhibit unique properties of energy storage and controllable photon release under additional stimulation, allowing for both wavelength and intensity multiplexing to realize high-capacity storage in the next-generation information storage system. However, the lack of suitable persistent luminescence materials with deep traps is the bottleneck of such storage technologies. In this study, we successfully developed a series of novel deep-trap persistent luminescence materials in the Ln 2+ /Ln 3+ -doped SrSi 2 O 2 N 2 system (Ln 2+ = Yb, Eu; Ln 3+ = Dy, Ho, Er) by applying the strategy of trap depth engineering. Interestingly, the trap depth can be tailored by selecting different codopants, and it monotonically increases from 0.90 to 1.18 eV in the order of Er, Ho, and Dy. This is well explained by the energy levels indicated in the host-referred binding energy scheme. The orange-red-emitting SrSi 2 O 2 N 2 :Yb,Dy and green-emitting SrSi 2 O 2 N 2 :Eu,Dy phosphors are demonstrated to be good candidates of information storage materials, which are attributed to their deep traps, narrow thermoluminescence glow bands, high emission efficiency, and excellent chemical stability. This work not only validates the suitability of deep-trap persistent luminescence materials in the information storage applications, but also broadens the avenue to explore such kinds of new materials for applications in anticounterfeiting and advanced displays.

  3. Controlling energy transfer between multiple dopants within a single nanoparticle

    PubMed Central

    DiMaio, Jeffrey R.; Sabatier, Clément; Kokuoz, Baris; Ballato, John

    2008-01-01

    Complex core-shell architectures are implemented within LaF3 nanoparticles to allow for a tailored degree of energy transfer (ET) between different rare earth dopants. By constraining specific dopants to individual shells, their relative distance to one another can be carefully controlled. Core-shell LaF3 nanoparticles doped with Tb3+ and Eu3+ and consisting of up to four layers were synthesized with an outer diameter of ≈10 nm. It is found that by varying the thicknesses of an undoped layer between a Tb3+-doped layer and a Eu3+-doped layer, the degree of ET can be engineered to allow for zero, partial, or total ET from a donor ion to an acceptor ion. More specifically, the ratio of the intensities of the 541-nm Tb3+ and 590 nm Eu3+ peaks was tailored from <0.2 to ≈2.4 without changing the overall composition of the particles but only by changing the internal structure. Further, the emission spectrum of a blend of singly doped nanoparticles is shown to be equivalent to the spectra of co-doped particles when a core-shell configuration that restricts ET is used. Beyond simply controlling ET, which can be limiting when designing materials for optical applications, this approach can be used to obtain truly engineered spectral features from nanoparticles and composites made from them. Further, it allows for a single excitation source to yield multiple discrete emissions from numerous lanthanide dopants that heretofore would have been quenched in a more conventional active optical material. PMID:18250307

  4. The EU-project United4Health: User-Centred Design and Evaluation of a Collaborative Information System for a Norwegian Telehealth Service.

    PubMed

    Smaradottir, Berglind; Gerdes, Martin; Martinez, Santiago; Fensli, Rune

    2015-01-01

    This study presents the user-centred design and evaluation process of a Collaborative Information System (CIS), developed for a new telehealth service for remote monitoring of chronic obstructive pulmonary disease patients after hospital discharge. The CIS was designed based on the information gathered in a workshop, where target end-users described the context of use, a telehealth workflow and their preferred ways of interaction with the solution. Evaluation of the iterative refinements were made through user tests, semi-structured interviews and a questionnaire. A field trial reported results on the ease of use and user satisfaction during the interaction with the fully developed system. The implemented CIS was successfully deployed within the secured Norwegian Health Network. The research was a result of cooperation between international partners within the EU FP7 project United4Health.

  5. An analysis of European shale gas policies: Why EU member states are pursuing divergent 'fracking' strategies

    NASA Astrophysics Data System (ADS)

    Thorne, Ben

    The recent progression in hydraulic fracturing or 'fracking' has enabled energy companies to extract once-considered, inaccessible hydrocarbons. The United States has been at the forefront of this controversial industry, revolutionizing the energy market by becoming the world's largest oil and natural gas producer as a result of its vast shale deposits. Shale oil and gas deposits are not unique to North America, however. EU member states are faced with the dilemma of whether to permit fracking domestically or suspend operations. The United Kingdom and Romania have issued concessions for exploring their reserves, while France and Bulgaria have halted all drilling efforts, citing environmental concerns. This paper evaluates why these four European countries pursued divergent fracking policies, arguing that energy security and Russian-relations are more relevant and powerful explanatory factors than a country's commitment to protecting the environment.

  6. Hybridization gap in the semiconducting compound SrIr 4In 2Ge 4

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Calta, Nicholas P.; Im, Jino; Fang, Lei

    Here, large single crystals of SrIr 4In 2Ge 4 were synthesized using the In flux method. This compound is a hybridization gap semiconductor with an experimental optical band gap of E g = 0.25(3) eV. It crystallizes in the tetragonal EuIr 4In 2Ge 4 structure type with space group 1more » $$\\overline{4}$$2m and unit cell parameters a = 6.9004(5) Å and c = 8.7120(9) Å. The electronic structure is very similar to both EuIr 4In 2Ge 4 and the parent structure Ca 3Ir 4Ge 4, suggesting that these compounds comprise a new family of hybridization gap materials that exhibit indirect gap, semiconducting behavior at a valence electron count of 60 per formula unit, similar to the Heusler alloys.« less

  7. Hybridization gap in the semiconducting compound SrIr 4In 2Ge 4

    DOE PAGES

    Calta, Nicholas P.; Im, Jino; Fang, Lei; ...

    2016-11-18

    Here, large single crystals of SrIr 4In 2Ge 4 were synthesized using the In flux method. This compound is a hybridization gap semiconductor with an experimental optical band gap of E g = 0.25(3) eV. It crystallizes in the tetragonal EuIr 4In 2Ge 4 structure type with space group 1more » $$\\overline{4}$$2m and unit cell parameters a = 6.9004(5) Å and c = 8.7120(9) Å. The electronic structure is very similar to both EuIr 4In 2Ge 4 and the parent structure Ca 3Ir 4Ge 4, suggesting that these compounds comprise a new family of hybridization gap materials that exhibit indirect gap, semiconducting behavior at a valence electron count of 60 per formula unit, similar to the Heusler alloys.« less

  8. European perspectives on pediatric formulations.

    PubMed

    Breitkreutz, Jörg

    2008-11-01

    The 2007 European Union (EU) regulation on medicinal products for pediatric use may change the present unsatisfying situation in the EU by stimulating research and development of medicines for use in children through rewards and incentives. This commentary reflects on the new EU regulations and guidelines, with special attention paid to the impact on pediatric formulation science. The focus of this article is on the EU perspective for pediatric formulations and highlights the differences compared with the pediatric drug formulation situation in the United States. Materials for this article were gathered during a literature search of MEDLINE and Chemical Abstracts (1970-October 2008) using the following terms: paediatric/pediatric drug formulations, age-appropriate dosage forms, child-appropriate medicines, and paediatric/pediatric regulation. Since the EU legislation on medicines for children came into force in 2007, a great emphasis has been placed on creating new organizations, scientific networks, and programs dealing with pediatric medicines and child-appropriate drug formulations. Although the US legislation was an appropriate model, the EU introduced some novel measures to improve the current situation, such as the Paediatric Investigation Plan and the Paediatric Use Marketing Authorisation. For globally operating pharmaceutical companies, the peculiarities of the European market have a strong impact on their product development strategies. Because the European approach demands early investigations into drug formulations for children, various issues must be resolved, including the following: choosing formulations for each age group, determining which excipients may be used in the formulation and which delivery device is appropriate, and predicting the taste sensation of an oral formulation. Numerous initiatives and networks are evolving in Europe. An important future task will be the coordination of these activities and the linking to other groups working on pediatric formulations outside the EU. Similar to the research in pediatric drug formulations that was stimulated by the US legislation and incentives of the last decade, the 2007 EU legislation promises improvements in the availability of child-appropriate drugs in Europe.

  9. EU Climate-KIC Innovation Blue Green Dream Project: Creation of Educational Experience, Communication and Dissemination

    NASA Astrophysics Data System (ADS)

    Tchiguirinskaia, Ioulia; Gires, Auguste; Vicari, Rosa; Schertzer, Daniel; Maksimovic, Cedo

    2013-04-01

    The combined effects of climate change and increasing urbanization call for a change of paradigm for planning, maintenance and management of new urban developments and retrofitting of existing ones to maximize ecosystem services and increase resilience to the adverse climate change effects. This presentation will discuss synergies of the EU Climate-KIC Innovation Blue Green Dream (BGD) Project in promoting the BGD demonstration and training sites established in participating European countries. The BGD demonstration and training sites show clear benefits when blue and green infrastructures are considered together. These sites present a unique opportunity for community learning and dissemination. Their development and running acts as a hub for engineers, architects, planners and modellers to come together in their design and implementation stage. This process, being captured in a variety of media, creates a corpus of knowledge, anchored in specific examples of different scales, types and dimensions. During the EU Climate-KIC Innovation Blue Green Dream Project, this corpus of knowledge will be used to develop dissemination and training materials whose content will be customised to fit urgent societal needs.

  10. Effects of Eu and Sm on Methylobacterium sp.

    NASA Astrophysics Data System (ADS)

    Hibi, Yoshihisa; Okuda, Masayo; Sakuma, Ryusuke; Iwama, Tomonori; Kawai, Keiichi

    Eu and Sm have been widely used in high technology products. In this study the authors isolated a soil bacterium, identified as Methylobacterium sp. MAFF211642, which exhibited colonies on 1/100 nutrient agar, supplemented by 30µM Eu and Sm; the soil bacterium was found to exhibit larger colonies than those in the absence of these elements. However, when 0.5% methanol was added to the nutrient agar, only Sm was found to stimulate the growth. Other rare earth and metal elements did not affect or inhibit, regardless of the presence of methanol. Addition of both Sm and methanol to the nutrient broth increased the growth of this strain 10-fold in colony forming unit larger than when both were absent. When both methanol and Sm were added to the nutrient broth, specific activity of methanol dehydrogenase in a crude extract of the bacterium increased approximately 5.4-fold.

  11. Nanotechnology publications and citations by leading countries and blocs

    NASA Astrophysics Data System (ADS)

    Youtie, Jan; Shapira, Philip; Porter, Alan L.

    2008-08-01

    This article examines the relative positions with respect to nanotechnology research publications of the European Union (EU), the United States (US), Japan, Germany, China, and three Asian Tiger nations (South Korea, Singapore, and Taiwan). The analysis uses a dataset of nanotechnology publication records for the time period 1990 through 2006 (part year) extracted from the Science Citation Index obtained through the Web of Science and was developed through a two-stage modularized Boolean approach. The results show that although the EU and the US have the highest number of nanotechnology publications, China and other Asian countries are increasing their publications rapidly, taking an ever-larger proportion of the total. When viewed in terms of the quality-based measure of citations, Asian nanotechnology researchers also show growth in recent years. However, by such citation measures, the US still maintains a strongly dominant position, followed by the EU.

  12. Latest Cambrian-Early Ordovician rift-related magmatic activity in the Kouřim Unit, Bohemian Massif

    NASA Astrophysics Data System (ADS)

    Soejono, Igor; Machek, Matej; Sláma, Jiří; Janoušek, Vojtěch

    2017-04-01

    Pre-collisional history of high-grade Variscan complexes is mostly difficult to reveal, due to intense reworking during the development of the orogenic belt. An ancient magmatism could provide a unique possibility to study it. The Kouřim Unit represents an extensive pre-Variscan plutonic body involved into the tectonic collage of the Kutná Hora Crystalline Complex, at the northern margin of the Moldanubian Domain in the Bohemian Massif. The LA-ICP-MS zircon ages and geochemical characteristics of (meta-)igneous rocks from the Kouřim Unit allow us to determine the timing and nature of magmatic activity within this part of the Bohemian Massif and thus to decipher its pre-Variscan evolution. The Kouřim Unit is composed of strongly metamorphosed and deformed sequence of magmatic rocks, dominated mainly by various types of migmatites, coarse-grained orthogneisses and minor metadiorites. The newly obtained LA-ICP-MS U-Pb zircon ages of four orthogneisses ranging between 486 ± 2 Ma and 484 ± 2 Ma are interpreted as timing the magma crystallization. The single metadiorite gave concordia age of 337 ± 2 Ma interpreted as the age of migmatitization. Few discordant older ages from metadiorite are considered as older xenocrysts more or less reset during the Variscan metamorphism. The orthogneisses are acid (SiO2 = 68.6-76.4 wt. %), exclusively subaluminous and seem to form a single calc-alkaline trend, whereas the metadiorite is intermediate (SiO2 = 54.3 wt. %; mg# = 61), distinctly metaluminous and displays tholeiitic character. The chondrite-normalized REE patterns for the orthogneisses show LREE enrichment (LaN/YbN = 1.5-8.9) and deep negative Eu anomalies (Eu/Eu* = 0.42-0.32); the NMORB-normalized spiderplots feature LILE/HFSE enrichment with deep negative Nb- Ta-Ti anomalies. In contrast, both patterns of metadiorite resemble those of NMORB (LaN/YbN = 0.5, Eu/Eu* = 0.96). The apparent magmatic arc-like geochemical signature of the orthogneisses is interpreted as inherited from the source, represented most likely by recycled immature arc-related material (?metagraywackes). The real tectonic setting of this Late Cambrian magmatic activity seems rather indicated by the within-plate geochemistry of the metadiorite. These results bring further evidence for the presence of the Late Cambrian-Early Ordovician extensional event documented throughout the basement of the European Variscan Belt. Together with other occurrences of bimodal magmatism, as well as metamorphic and sedimentary record, indicate an important period of lithospheric thinning. This overall Early Palaeozoic rift-related architecture is often considered as a consequence of the Rheic Ocean opening.

  13. Consequence for dairy herds in the United States of imposing different standards for somatic cell count

    USDA-ARS?s Scientific Manuscript database

    New European Union (E.U.) regulations may require that a somatic cell count (SCC) limit of 400,000 cells/mL for milk be met by every farm that contributes to pooled milk exported to Europe. In the United States, the standard is 750,000 cells/mL. Because bulk tank SCC is not readily available through...

  14. Using Automatic Identification System Technology to Improve Maritime Border Security

    DTIC Science & Technology

    2014-12-01

    digital selective calling EPIRB Emergency Position Indicting Radio Beacon EU European Union FAA Federal Aviation Administration GAO U. S. Government...that has visited a hovering vessel or received merchandise outside the territorial sea. A hovering vessel is defined as a vessel loitering offshore...often with the intent to introduce merchandise into the United States illegally. Departing the United States and transiting international or foreign

  15. A crossover randomized prospective pilot study evaluating a central venous catheter team in reducing catheter-related bloodstream infections in pediatric oncology patients.

    PubMed

    Secola, Rita; Azen, Colleen; Lewis, Mary Ann; Pike, Nancy; Needleman, Jack; Sposto, Richard; Doering, Lynn

    2012-01-01

    Treatment for most children with cancer includes the use of a central venous catheter (CVC). CVCs provide reliable venous access for delivery of chemotherapy and supportive care. This advantage is mitigated by an increased risk of bloodstream infections (BSIs). Despite the ubiquitous use of CVCs, few prospective studies have been conducted to address infection prevention strategies in pediatric oncology patients. Prospective, crossover pilot study of a CVC team intervention versus standard care. Two inpatient oncology units in a metropolitan children's hospital. A total of 41 patients/135 admissions for the experimental unit (EU) and 41/129 admissions for the control unit (CU). Patients received a CVC blood draw bundle procedure by a CVC registered nurse (RN) team member (experimental intervention: EU) for 6 months and by the assigned bedside RN (standard care: CU) for 6 months. Feasibility of implementing a CVC RN team; a significant difference in CVC-related BSIs between the team intervention versus standard care and risk factors associated in the development of CVC-related BSIs were determined. There were 7 CVC-related BSIs/1238 catheter days in the EU group (5.7/1000 catheter days) versus 3 CVC-related BSIs/1419 catheter days in the CU group (2.1/1000 catheter days; P = .97). Selected risk factors were not significantly associated with the development of a CVC-related BSI. A CVC team in the care of pediatric oncology patients is feasible; however, a larger cohort will be required to adequately determine the effectiveness of the team reducing CVC-related BSIs.

  16. Determinants of endotoxin levels in carpets in New Zealand homes.

    PubMed

    Wickens, K; Douwes, J; Siebers, R; Fitzharris, P; Wouters, I; Doekes, G; Mason, K; Hearfield, M; Cunningham, M; Crane, J

    2003-06-01

    Endotoxin in house dust has been shown to be associated with asthma severity. Little is known about the influence of housing characteristics on endotoxin distribution. Using standardized methods, dust was sampled from a 1m(2) site and the whole accessible carpet area in selected Wellington, New Zealand homes (n = 77). Endotoxin was measured using a Limulus Amoebocyte Lysate assay. Relative humidity and temperature were recorded using sensors placed in carpet bases. Questionnaires were used to collect information on housing characteristics. All analyses were performed for endotoxin units (EU)/mg and EU/m2 for each site. Geometric mean endotoxin levels were 22.7 EU/mg [geometric standard deviation (GSD) = 2.4] or 30,544 EU/m2 (GSD = 3.2) from the 1m(2) site, and 28.4 EU/mg (GSD = 3.4) or 5653 EU/m2 (GSD = 6.4) from the whole room. After controlling for confounding, endotoxin was positively associated with dogs inside [geometric mean ratio (GMR): 0.9-2.0], total household occupants (GMR: 1.7-2.0, for 1 m2 sample only), vacuum cleaners <1-year old (GMR: 2.3-2.7), reusing vacuum dust collection bags (GMR: 1.4-3.1), steamcleaning or shampooing the carpet (GMR: 1.4-2.2) and high relative humidity (GMR: 1.4-1.6). Lower endotoxin was associated with floor insulation (GMR: 0.4-0.8), and north-facing living rooms (GMR: 0.4-0.8). This study has identified home characteristics that could be modified to reduce endotoxin exposure.

  17. EuCliD--a medical registry.

    PubMed

    Steil, H; Amato, C; Carioni, C; Kirchgessner, J; Marcelli, D; Mitteregger, A; Moscardo, V; Orlandini, G; Gatti, E

    2004-01-01

    The European Clinical Database EuCliD small star, filled has been developed as a tool for supervising selected quality indicators of about 200 European dialysis centers. Major efforts had to be made to comply with local and European laws regarding data security. EuCliD is a Lotus Notes based flat-file database currently containing medical data of more than 14,000 dialysis patients from 10 European countries. Another 15,000 patients from 150 centers in 4 South-American countries will be added soon. Data are entered either manually or by means of interfaces to existing local data managing systems. This information is transferred to a central Lotus Notes Server. Data evaluation was performed with statistical tools like SPSS. EuCliD is used as a part of the CQI (Continuous Quality Improvement) management system of Fresenius Medical Care (FMC) dialysis units. Each participating dialysis center receives (currently every half year) benchmarking reports at a regular interval. The benchmark for all quality parameters is the weighted mean of the corresponding data of all centers. An obvious impact of data sampling and data evaluation on the quality of the treatments could be observed within the first one and a half years of working with EuCliD. This also concerns important outcome predictors like Kt/V and hemoglobin concentration as the outcome itself expressed in hospitalization days and survival rates. With the help of EuCliD the user is able to sample clinical data, identify problems, search for solutions with the aim of improving the dialysis treatment quality and guarantee a high-class treatment quality for all patients.

  18. Enhanced luminescence behaviour of Eu3+ doped heavy metal oxide telluroborate glasses for Laser and LED applications

    NASA Astrophysics Data System (ADS)

    Pravinraj, S.; Vijayakumar, M.; Marimuthu, K.

    2017-03-01

    Effect on structural and spectroscopic behaviour caused by the replacement of lead cations with the aluminium cations in the Eu3+ doped heavy metal oxide borophosphate glasses have been studied with the chemical composition (55B2O3+19.5TeO2+10K2O+(15-x)PbO+xAl2O3+0.5Eu2O3 (where x=0, 2.5, 5, 7.5, 10, 12.5 and 15 in wt%) prepared by melt quenching technique. The FTIR and Raman spectral studies reveal the presence of various fundamental vibrational units and are used to identify the phonon energy of the title glasses. The positive values of bonding parameter (δ) indicate the formation of covalent bonds between the dopant (Eu3+) and the anions (O2-). Luminescence spectra of all the titled glasses exhibit five emission bands due to the electronic transitions of the trivalent europium ions. The radiative properties such as transition probability (A), stimulated emission cross-section (σpE) and branching ratio (βR) of the various emission transitions of the Eu3+ ions have been estimated using Judd-Ofelt (JO) theory. The characteristic emission was identified through CIE 1931 color chromaticity diagram and McCamy's formula have been used to estimate the correlated color temperature (CCT) using (x,y) chromaticity coordinates. The luminescence decay profile pertaining to the 5D0 metastable state of the Eu3+ ions exhibits single exponential behaviour uniformly for all the titled glasses and the experimental lifetime values were obtained following the curve fitting method.

  19. Comparison of early and late treatment with a recombinant endotoxin neutralizing protein in a rat model of Escherichia coli sepsis.

    PubMed

    Weiner, D L; Kuppermann, N; Saladino, R A; Thompson, C M; Novitsky, T J; Siber, G R; Fleisher, G R

    1996-09-01

    To test the efficacy of a recombinant endotoxin neutralizing protein as compared with saline in rats with Escherichia coli sepsis. Prospective, controlled animal trial. Hospital animal research laboratory. Male Wistar rats challenged with intraperitoneal E. coli, O18ac K1, and treated 1 hr later with ceftriaxone and gentamicin. Recombinant endotoxin neutralizing protein, 50 mg/kg, was administered to rats 1, 2, or 3 hrs after E. coli challenge; saline was administered to control animals. Quantitative bacteremia, 1 hr after challenge and before antibiotic administration, was not significantly different between treatment groups (range geometric mean 451 to 621 colony-forming units [cfu]/mL). The endotoxin concentration, measured immediately before recombinant endotoxin neutralizing protein administration, was significantly higher in animals sampled and treated at 2 hrs (geometric mean 260 EU/mL; 95% confidence interval 140 to 480 EU/mL), or 3 hrs (geometric mean 697 EU/mL; 95% confidence interval 307 to 1585 EU/mL) after E. coli challenge, compared with animals sampled and treated at 1 hr (geometric mean 17 EU/mL; 95% confidence interval 7 to 69 EU/ mL). Survival rate was significantly greater in rats treated with recombinant endotoxin neutralizing protein at 1 hr (23/27; p < .001) or 2 hrs (8/30; p < .01) after E. coli challenge than in controls (1/32). Administration of recombinant endotoxin neutralizing protein delayed up to 2 hrs after challenge with E. coli improves survival in antibiotic-treated rats with Gram-negative sepsis.

  20. Will the European Union reach the United Nations Millennium declaration target of a 50% reduction of tuberculosis mortality between 1990 and 2015?

    PubMed

    van der Werf, Marieke J; Bonfigli, Sandro; Hruba, Frantiska

    2017-07-06

    The Millennium Development Goals (MDG) provide targets for 2015. MDG 6 includes a target to reduce the tuberculosis (TB) death rate by 50% compared with 1990. We aimed to assess whether this target was reached by the European Union (EU) and European Economic Area countries. We used Eurostat causes of death data to assess whether the target was reached in the EU. We calculated the reduction in reported and adjusted death rates and the annual average percentage decline based on the available data. Between 1999 and 2014, the TB death rate decreased by 50%, the adjusted death rate by 56% and the annual average percentage decline was 5.43% (95% confidence interval 4.94-6.74) for the EU. Twenty of 26 countries reporting >5 TB deaths in the first reporting year reached the target of 50% reduction in adjusted death rate. The EU reached the MDG target of a 50% reduction of the TB death rate and also the annual average percentage decline was larger than the 2.73% needed to reach the target. The World Health Organization 'End TB Strategy' requires a further reduction of the number of TB deaths of 35% by 2020 compared to 2015, which will challenge TB prevention and care services in the EU.

  1. Public health implications of differences in U.S. and European Union regulatory policies for breast implants.

    PubMed

    Zuckerman, Diana; Booker, Nyedra; Nagda, Sonia

    2012-12-01

    The recall of tens of thousands of defective breast implants in Europe in 2011-12 as well as new data on risks have raised questions about regulatory standards for these and other medical implants in the United States (U.S.) and European Union (EU). In the U.S., breast implants are regulated as high-risk medical devices that must be proven reasonably safe and effective in clinical trials and subject to government inspection before they can be sold. In contrast, clinical trials and inspections have not been required for breast implants or other implanted devices in the EU; approval is based on other information. As a result of these differing standards, the PIP breast implants that were recalled across Europe had been removed from the market years earlier in the U.S. than in the EU, a decision U.S. government health agencies can point to with pride. Nevertheless, the FDA track record on post-marketing breast implant research indicates poorly implemented studies and little meaningful enforcement to ensure that studies have been conducted correctly or findings reported accurately or acted upon. In sum, neither the EU nor the US has used their regulatory authority to ensure the long-term safety of breast implants. However, in 2012 the EU announced regulatory changes that could improve that situation. Copyright © 2012 Reproductive Health Matters. Published by Elsevier Ltd. All rights reserved.

  2. Hypersonic Technology Developments with EU Co-Funded Projects

    DTIC Science & Technology

    2010-09-01

    metal or even high performance alloys . The hollow sphere technology allows high degrees of porosities, reproducible properties and fair process control...sandwich structure configuration will be investigated. Titanium alloys and Ti-aluminides exhibit excellent mechanical properties for applications where...cooling techniques, new alloys , improved thermodynamic cycles by increased pressure ratios and TIT, etc… As the Olympus 593 engine was based on the

  3. A decade of marketing approval of gene and cell-based therapies in the United States, European Union and Japan: An evaluation of regulatory decision-making.

    PubMed

    Coppens, D G M; de Wilde, S; Guchelaar, H J; De Bruin, M L; Leufkens, H G M; Meij, P; Hoekman, J

    2018-05-02

    There is a widely held expectation of clinical advance with the development of gene and cell-based therapies (GCTs). Yet, establishing benefits and risks is highly uncertain. We examine differences in decision-making for GCT approval between jurisdictions by comparing regulatory assessment procedures in the United States (US), European Union (EU) and Japan. A cohort of 18 assessment procedures was analyzed by comparing product characteristics, evidentiary and non-evidentiary factors considered for approval and post-marketing risk management. Product characteristics are very heterogeneous and only three products are marketed in multiple jurisdictions. Almost half of all approved GCTs received an orphan designation. Overall, confirmatory evidence or indications of clinical benefit were evident in US and EU applications, whereas in Japan approval was solely granted based on non-confirmatory evidence. Due to scientific uncertainties and safety risks, substantial post-marketing risk management activities were requested in the EU and Japan. EU and Japanese authorities often took unmet medical needs into consideration in decision-making for approval. These observations underline the effects of implemented legislation in these two jurisdictions that facilitate an adaptive approach to licensing. In the US, the recent assessments of two chimeric antigen receptor-T cell (CAR-T) products are suggestive of a trend toward a more permissive approach for GCT approval under recent reforms, in contrast to a more binary decision-making approach for previous approvals. It indicates that all three regulatory agencies are currently willing to take risks by approving GCTs with scientific uncertainties and safety risks, urging them to pay accurate attention to post-marketing risk management. Copyright © 2018 International Society for Cellular Therapy. Published by Elsevier Inc. All rights reserved.

  4. Tissue Engineering Stem Cells – An e-Governance Strategy

    PubMed Central

    Grange, Simon

    2011-01-01

    The rules of governance are changing. They are necessarily becoming more stringent as interventions offered to treat conditions carry unpredictable side effects, often associated with novel therapeutic vectors. The clinical relevance of this relates to the obligations of those involved in research, to ensure the best protection for subjects whilst encouraging the development of the field. Existing evidence supports the concept of e-Governance both in operational health research and more broadly in the strategic domain of policy formation. Building on the impact of the UK Comprehensive Research Network and recent EU Directives, it is now possible to focus on the issues of regulation for cell therapies in musculoskeletal science through the development of the Advanced Therapeutic Medicinal Products (ATMP) category of research products. This article reviews the framework that has borne this and the need for more detailed Virtual Research Integration and Collaboration (VRIC) systems to ensure regulatory compliance. Technology research and development plans must develop in close association between tissue engineering and treating clinicians. The scope of this strategy relates to the handling of human tissues the transport and storage of specimens in accordance with current EU directives and the Human Tissue Authority (HTA) regulations. PMID:21886693

  5. 14 CFR 25.363 - Side load on engine and auxiliary power unit mounts.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... § 25.363 Side load on engine and auxiliary power unit mounts. (a) Each engine and auxiliary power unit... the side load on the engine and auxiliary power unit mount, at least equal to the maximum load factor... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Side load on engine and auxiliary power...

  6. 14 CFR 25.363 - Side load on engine and auxiliary power unit mounts.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... § 25.363 Side load on engine and auxiliary power unit mounts. (a) Each engine and auxiliary power unit... the side load on the engine and auxiliary power unit mount, at least equal to the maximum load factor... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Side load on engine and auxiliary power...

  7. 14 CFR 25.363 - Side load on engine and auxiliary power unit mounts.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... § 25.363 Side load on engine and auxiliary power unit mounts. (a) Each engine and auxiliary power unit... the side load on the engine and auxiliary power unit mount, at least equal to the maximum load factor... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Side load on engine and auxiliary power...

  8. 14 CFR 25.363 - Side load on engine and auxiliary power unit mounts.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... § 25.363 Side load on engine and auxiliary power unit mounts. (a) Each engine and auxiliary power unit... the side load on the engine and auxiliary power unit mount, at least equal to the maximum load factor... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Side load on engine and auxiliary power...

  9. 14 CFR 25.363 - Side load on engine and auxiliary power unit mounts.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... § 25.363 Side load on engine and auxiliary power unit mounts. (a) Each engine and auxiliary power unit... the side load on the engine and auxiliary power unit mount, at least equal to the maximum load factor... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Side load on engine and auxiliary power...

  10. 40 CFR 1039.645 - What special provisions apply to engines used for transportation refrigeration units?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... engines used for transportation refrigeration units? 1039.645 Section 1039.645 Protection of Environment... apply to engines used for transportation refrigeration units? Manufacturers may choose to use the provisions of this section for engines used in transportation refrigeration units (TRUs). The operating...

  11. 40 CFR 1039.645 - What special provisions apply to engines used for transportation refrigeration units?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... engines used for transportation refrigeration units? 1039.645 Section 1039.645 Protection of Environment... apply to engines used for transportation refrigeration units? Manufacturers may choose to use the provisions of this section for engines used in transportation refrigeration units (TRUs). The operating...

  12. 40 CFR 1039.645 - What special provisions apply to engines used for transportation refrigeration units?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... engines used for transportation refrigeration units? 1039.645 Section 1039.645 Protection of Environment... apply to engines used for transportation refrigeration units? Manufacturers may choose to use the provisions of this section for engines used in transportation refrigeration units (TRUs). The operating...

  13. 40 CFR 1039.645 - What special provisions apply to engines used for transportation refrigeration units?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... engines used for transportation refrigeration units? 1039.645 Section 1039.645 Protection of Environment... apply to engines used for transportation refrigeration units? Manufacturers may choose to use the provisions of this section for engines used in transportation refrigeration units (TRUs). The operating...

  14. 40 CFR 1039.645 - What special provisions apply to engines used for transportation refrigeration units?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... engines used for transportation refrigeration units? 1039.645 Section 1039.645 Protection of Environment... apply to engines used for transportation refrigeration units? Manufacturers may choose to use the provisions of this section for engines used in transportation refrigeration units (TRUs). The operating...

  15. Competence and Human Resource Development in Multinational Companies in Three European Union Member States: A Comparative Analysis between Austria, the Netherlands and the United Kingdom. CEDEFOP Panorama Series.

    ERIC Educational Resources Information Center

    Markowitsch, Jorg; Kollinger, Iris; Warmerdam, John; Moerel, Hans; Konrad, John; Burell, Catherine; Guile, David

    A comparative analysis of human resources development and management in the subsidiaries of three multinational companies (Xerox, Glaxo Wellcome, and AXA Nordstern Colonia) was conducted in these three European Union (EU) member states: Austria, the United Kingdom, and the Netherlands. Case studies were used, focusing on competence needs and…

  16. Building Great (Coalition) Engineers

    DTIC Science & Technology

    2011-04-01

    36 Engineer May-August 201038 Engineer January-April 1 G’day from the Royal Australian Engineers (RAE) School of Military Engineering (SME) at Steele...Barracks, Moorebank, New South Wales, Austra- lia. Like more than 20 United States Army engineer ma- jors before me, I am the military personnel...exchange pro- gram officer assigned to the United States Army Engineer School, attached to United States Army Pacific, and further attached to SME. By

  17. A knowledge engineering framework towards clinical support for adverse drug event prevention: the PSIP approach.

    PubMed

    Koutkias, Vassilis; Stalidis, George; Chouvarda, Ioanna; Lazou, Katerina; Kilintzis, Vassilis; Maglaveras, Nicos

    2009-01-01

    Adverse Drug Events (ADEs) are currently considered as a major public health issue, endangering patients' safety and causing significant healthcare costs. Several research efforts are currently concentrating on the reduction of preventable ADEs by employing Information Technology (IT) solutions, which aim to provide healthcare professionals and patients with relevant knowledge and decision support tools. In this context, we present a knowledge engineering approach towards the construction of a Knowledge-based System (KBS) regarded as the core part of a CDSS (Clinical Decision Support System) for ADE prevention, all developed in the context of the EU-funded research project PSIP (Patient Safety through Intelligent Procedures in Medication). In the current paper, we present the knowledge sources considered in PSIP and the implications they pose to knowledge engineering, the methodological approach followed, as well as the components defining the knowledge engineering framework based on relevant state-of-the-art technologies and representation formalisms.

  18. System Engineering Infrastructure Evolution Galileo IOV and the Steps Beyond

    NASA Astrophysics Data System (ADS)

    Eickhoff, J.; Herpel, H.-J.; Steinle, T.; Birn, R.; Steiner, W.-D.; Eisenmann, H.; Ludwig, T.

    2009-05-01

    The trends to more and more constrained financial budgets in satellite engineering require a permanent optimization of the S/C system engineering processes and infrastructure. Astrium in the recent years already has built up a system simulation infrastructure - the "Model-based Development & Verification Environment" - which meanwhile is well known all over Europe and is established as Astrium's standard approach for ESA, DLR projects and now even the EU/ESA-Project Galileo IOV. The key feature of the MDVE / FVE approach is to provide entire S/C simulation (with full featured OBC simulation) already in early phases to start OBSW code tests on a simulated S/C and to later add hardware in the loop step by step up to an entire "Engineering Functional Model (EFM)" or "FlatSat". The subsequent enhancements to this simulator infrastructure w.r.t. spacecraft design data handling are reported in the following sections.

  19. Engine speed control apparatus

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ishii, M.; Miyazaki, M.; Nakamura, N.

    1986-11-04

    This patent describes an engine speed control apparatus. The system comprises an actuator for adjusting an engine speed, a first unit for computing a desired engine speed, a second unit for detecting the actual engine speed, and a third unit for detecting the difference between the outputs of the first and second units. The system also includes a fourth unit for computing a control pulse width for the actuator in accordance with the output of the third unit, a fifth unit for generating a control signal, a sixth unit for driving the actuator in response to the output of themore » fifth unit, and a seventh unit for computing an optimal halt time to interrupt the driving of the actuator. The actuator is driven intermittently in conformity in the control pulse width and the halt time.« less

  20. United European Gastroenterology evidence-based guidelines for the diagnosis and therapy of chronic pancreatitis (HaPanEU).

    PubMed

    Löhr, J Matthias; Dominguez-Munoz, Enrique; Rosendahl, Jonas; Besselink, Marc; Mayerle, Julia; Lerch, Markus M; Haas, Stephan; Akisik, Fatih; Kartalis, Nikolaos; Iglesias-Garcia, Julio; Keller, Jutta; Boermeester, Marja; Werner, Jens; Dumonceau, Jean-Marc; Fockens, Paul; Drewes, Asbjorn; Ceyhan, Gürlap; Lindkvist, Björn; Drenth, Joost; Ewald, Nils; Hardt, Philip; de Madaria, Enrique; Witt, Heiko; Schneider, Alexander; Manfredi, Riccardo; Brøndum, Frøkjer J; Rudolf, Sasa; Bollen, Thomas; Bruno, Marco

    2017-03-01

    There have been substantial improvements in the management of chronic pancreatitis, leading to the publication of several national guidelines during recent years. In collaboration with United European Gastroenterology, the working group on 'Harmonizing diagnosis and treatment of chronic pancreatitis across Europe' (HaPanEU) developed these European guidelines using an evidence-based approach. Twelve multidisciplinary review groups performed systematic literature reviews to answer 101 predefined clinical questions. Recommendations were graded using the Grading of Recommendations Assessment, Development and Evaluation system and the answers were assessed by the entire group in a Delphi process online. The review groups presented their recommendations during the 2015 annual meeting of United European Gastroenterology. At this one-day, interactive conference, relevant remarks were voiced and overall agreement on each recommendation was quantified using plenary voting (Test and Evaluation Directorate). After a final round of adjustments based on these comments, a draft version was sent out to external reviewers. The 101 recommendations covered 12 topics related to the clinical management of chronic pancreatitis: aetiology (working party (WP)1), diagnosis of chronic pancreatitis with imaging (WP2 and WP3), diagnosis of pancreatic exocrine insufficiency (WP4), surgery in chronic pancreatitis (WP5), medical therapy (WP6), endoscopic therapy (WP7), treatment of pancreatic pseudocysts (WP8), pancreatic pain (WP9), nutrition and malnutrition (WP10), diabetes mellitus (WP11) and the natural course of the disease and quality of life (WP12). Using the Grading of Recommendations Assessment, Development and Evaluation system, 70 of the 101 (70%) recommendations were rated as 'strong' and plenary voting revealed 'strong agreement' for 99 (98%) recommendations. The 2016 HaPanEU/United European Gastroenterology guidelines provide evidence-based recommendations concerning key aspects of the medical and surgical management of chronic pancreatitis based on current available evidence. These recommendations should serve as a reference standard for existing management of the disease and as a guide for future clinical research.

  1. Assessing Conventional Army Demands and Requirements for Ultra-Light Tactical Mobility

    DTIC Science & Technology

    2015-01-01

    hour Enemy or adversary actions Population Decision points Reserve Fires Engineer PMO AMD CBRN Intelligence R&S Avn Bde M o ve m en t an d m an eu ve...LDMove on Route Irish Seize on OBJ Irene 2nd BCT Cross LDMove on Route Longstreet Seize on OBJ Rose 3rd BCT FPOL with 1st BCT Airdrop resupply AMD Avn Bde

  2. Methodology for quantification of waste generated in Spanish railway construction works

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Guzman Baez, Ana de; Villoria Saez, Paola; Rio Merino, Mercedes del

    Highlights: Black-Right-Pointing-Pointer Two equations for C and D waste estimation in railway construction works are developed. Black-Right-Pointing-Pointer Mixed C and D waste is the most generated category during railway construction works. Black-Right-Pointing-Pointer Tunnel construction is essential to quantify the waste generated during the works. Black-Right-Pointing-Pointer There is a relationship between C and D waste generated and railway functional units. Black-Right-Pointing-Pointer The methodology proposed can be used to obtain new constants for other areas. - Abstract: In the last years, the European Union (EU) has been focused on the reduction of construction and demolition (C and D) waste. Specifically, in 2006,more » Spain generated roughly 47 million tons of C and D waste, of which only 13.6% was recycled. This situation has lead to the drawing up of many regulations on C and D waste during the past years forcing EU countries to include new measures for waste prevention and recycling. Among these measures, the mandatory obligation to quantify the C and D waste expected to be originated during a construction project is mandated. However, limited data is available on civil engineering projects. Therefore, the aim of this research study is to improve C and D waste management in railway projects, by developing a model for C and D waste quantification. For this purpose, we develop two equations which estimate in advance the amount, both in weight and volume, of the C and D waste likely to be generated in railway construction projects, including the category of C and D waste generated for the entire project.« less

  3. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Walker, Randy M

    Thousands of shipments of radioisotopes developed in the United States (US) are transported domestically and internationally for medical and industrial applications, including to partner laboratories in European Union (EU) countries. Over the past five years, the Environmental Protection Agency (EPA), the Department of Energy (DOE), and Oak Ridge National Laboratory (ORNL) have worked with state regulatory compliance personnel, key private sector shippers and carriers, the Department of Homeland Security (DHS), the Department of Transportation (DOT), the Department of Defense (DoD) and the Nuclear Regulatory Commission (NRC) on Radio Frequency Identification (RFID) tracking and monitoring of medical and industrial radioisotopes inmore » commerce. The EPA Radiological Source Tracking and Monitoring (RadSTraM) project tested, evaluated, and integrated RFID technologies in laboratory settings, and at multiple private-sector shipping and distribution facilities (Perkin Elmer and DHL) using common radioisotopes used in everyday commerce. The RFID tracking was also tested in association with other deployed technologies including radiation detection, chemical/explosives detection, advanced imaging, lasers, and infrared scanning. At the 2007 EU-US Summit, the leaders of the US Department of Commerce (DOC) and EU European Commission (EC) committed to pursue jointly directed Lighthouse Priority Projects. These projects are intended to 'foster cooperation' and 'reduce regulatory burdens' with respect to transatlantic commerce. The Transatlantic Economic Council (TEC) Lighthouse Project on Radio Frequency Identification (RFID) has been directed to 'develop a joint framework for cooperation on identification and development of best practices for Radio Frequency Identification (RFID) technologies.' The RFID Lighthouse Priority Project commits both sides to endeavor to align U.S. and EU regulatory and policy approaches on RFID technologies, including pilot projects in the public sector. The RadSTraM project was specifically cited as a candidate for a RFID Lighthouse Project by the EU/DOC collaboration in meeting their mutual goal of developing a 'joint framework for cooperation on identification and development of best practices for RFID technologies.' Concurrently, the Universal Postal Union (UPU) identified this project as a candidate for radioisotope packages shipped by the postal service between the United State Postal Service (USPS). and European Post Agencies.« less

  4. Engineering Education and Its Rewards in the United States and Japan.

    ERIC Educational Resources Information Center

    Kinmonth, Earl H.

    1986-01-01

    Contrary to misinformation circulating in the United States, the United States has more engineers absolutely and relatively than does Japan; and U.S. engineers have higher relative income and status than their Japanese counterparts. Compares U.S. and Japanese enrollments in engineering education, curriculum content, engineers' earnings relative to…

  5. Use of Free/Libre Open Source Software in Sepsis "-Omics" Research: A Bibliometric, Comparative Analysis Among the United States, EU-28 Member States, and China.

    PubMed

    Evangelatos, Nikolaos; Satyamourthy, Kapaettu; Levidou, Georgia; Brand, Helmut; Bauer, Pia; Kouskouti, Christina; Brand, Angela

    2018-05-01

    "-Omics" systems sciences are at the epicenter of personalized medicine and public health, and drivers of knowledge-based biotechnology innovation. Bioinformatics, a core component of omics research, is one of the disciplines that first employed Free/Libre Open Source Software (FLOSS), and thus provided a fertile ground for its further development. Understanding the use and characteristics of FLOSS deployed in the omics field is valuable for future innovation strategies, policy and funding priorities. We conducted a bibliometric, longitudinal study of the use of FLOSS in sepsis omics research from 2011 to 2015 in the United States, EU-28 and China. Because sepsis is an interdisciplinary field at the intersection of multiple omics technologies and medical specialties, it was chosen as a model innovation ecosystem for this empirical analysis, which used publicly available data. Despite development of and competition from proprietary commercial software, scholars in omics continue to employ FLOSS routinely, and independent of the type of omics technology they work with. The number of articles using FLOSS increased significantly over time in the EU-28, as opposed to the United States and China (R = 0.96, p = 0.004). Furthermore, in an era where sharing of knowledge is being strongly advocated and promoted by public agencies and social institutions, we discuss possible correlations between the use of FLOSS and various funding sources in omics research. These observations and analyses provide new insights into the use of FLOSS in sepsis omics research across three (supra)national regions. Further benchmarking studies are warranted for FLOSS trends in other omics fields and geographical settings. These could, in time, lead to the development of new composite innovation and technology use metrics in omics systems sciences and bioinformatics communities.

  6. The Variscan calc-alkalic plutonism of western Corsica: mineralogy and major and trace element geochemistry

    NASA Astrophysics Data System (ADS)

    Cocherie, A.; Rossi, Ph.; Le Bel, L.

    1984-10-01

    Petrographic and structural observations on the calc-alkalic plutonism of western Corsica revealed the existence of several successively emplaced units associated with large basic bodies. The present mineralogical and geochemical study deals with the genesis, evolution and relationships of these different units. Basic plutonism is represented by three genetically linked types of rock: norites and troctolites with cumulate textures characterized by low REE contents and either no Eu anomaly or a positive Eu anomaly; gabbros with enriched LREE relatively to HREE patterns, probably close to an initial basaltic liquid; and diorites ranging up to charnockites which represent liquids evolved to varying degrees, mainly by fractional crystallization. Trace element data and studies on the evolution of pyroxene pairs demonstrate the consanguinity of these calc-alkaline basic rocks which are derived from a high alumina basaltic melt. The various granitoids (granodiorites, monzogranites and leucocratic monzogranites, i.e., adamellites) have distinct evolution trends as shown by the composition of their mafic minerals and by trace element distributions. They cannot be considered as being derivatives of the basic suite and they cannot be related by a common fractionation sequence. Rather, they represent distinctive batches of crustal anatexis. In addition, hybridization phenomena with the basic melt are noticed in granodiorites. The particular problem of the low La/Yb, Eu/Eu∗ and the high U, Th, Cs leucocratic monzogranites is discussed in detail. In addition to more conventional trace element diagrams, the simultaneous statistical treatment of all the geochemical data by correspondence factor analysis is shown to be a very use tool in distinguishing between the different units and to classify the elements according to their geochemical properties.

  7. Challenges in the Search for Magnetic Coupling in 3d/4f Materials: Syntheses, Structures, and Magnetic Properties of the Lanthanide Copper Heterobimetallic Compounds, RE 2 Cu(TeO 3 ) 2 (SO 4 ) 2

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lin, Jian; Chai, Ping; Diefenbach, Kariem

    2014-03-03

    Twelve new lanthanide copper heterobimetallic compounds, RE2Cu(TeO3)2(SO4)2 (RE = Y, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu), with two different structural topologies, have been prepared by hydrothermal treatment. Both structure types crystallize in the triclinic space group, Pmore » $$\\bar{1}$$, but the unit cell parameters and structures are quite different. The earlier RE2Cu(TeO3)2(SO4)2 (RE = Y, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, and Tm) share a common structural motif consisting of edge-sharing LnO8 chains and [Cu(TeO3)2(SO4)2]6– units. The later lanthanide version (Yb and Lu) is composed of edge-sharing LnO7 dimers bridged by similar [Cu(TeO3)2(SO4)2]6– units. The change in the structure type can be attributed to the decreasing ionic radii of the lanthanides. The compounds containing RE3+ ions with diamagnetic ground states (Y3+ and Eu3+) exhibit antiferromagnetic ordering at 12.5 K and 15 K, respectively, owing to the magnetic exchange between Cu2+ moments. No magnetic phase transition was observed in all the other phases. The lack of magnetic ordering is attributed to the competing magnetic interactions caused by the presence of paramagnetic RE3+ ions. The magnetism data suggests that substantial 3d–4f coupling only occurs in the Yb analogue.« less

  8. Synthesis, Structure, and Complex Magnetism of MIr 2In 8 (M = Eu, Sr)

    DOE PAGES

    Calta, Nicholas P.; L. Bud’ko, Sergey; Rodriguez, Alexandra P.; ...

    2016-03-07

    In this paper, we report the synthesis, crystal structure, and physical properties of two new polar intermetallic compounds, EuIr 2In 8 and SrIr 2In 8. Both were synthesized in good yield using In metal as a reactive flux medium, enabling the growth of large crystals for physical property measurements. They crystallize in the orthorhombic space group Pbam with the CeFe 2Al 8 structure type, which is sometimes also referred to as the CaCo 2Al 8 structure type. The two analogues have unit cell parameters of a = 13.847(3) Å, b = 16.118(3) Å, and c = 4.3885(9) Å for Mmore » = Eu and a = 13.847(3) Å, b = 16.113(3) Å, and c = 4.3962(9) Å for M = Sr at room temperature. SrIr 2In 8 is a diamagnetic metal with no local magnetic moments on either the Sr or Ir sites, and the diamagnetic contribution from core electrons overwhelms the expected Pauli paramagnetism normally seen in intermetallic compounds. Magnetism in EuIr 2In 8 is dominated by the local Eu moments, which order antiferromagnetically at 5 K in low applied fields. Increasing the field strength depresses the magnetic ordering temperature and also induces a spin reorientation at lower temperature, indicating complex competing magnetic interactions. Finally, low-temperature heat capacity measurements show a significant enhancement of the Sommerfeld coefficient in EuIr 2In 8 relative to that in SrIr 2In 8, with estimated values of γ = 118(3) and 18.0(2) mJ mol –1 K –2, respectively.« less

  9. Determination of a No-Observable Effect Level for Endotoxin Following a Single Intravitreal Administration to Dutch Belted Rabbits.

    PubMed

    Bantseev, Vladimir; Miller, Paul E; Bentley, Ellison; Schuetz, Chris; Streit, Tim M; Christian, Brian J; Farman, Cindy; Booler, Helen; Thackaberry, Evan A

    2017-03-01

    The purpose of this study was to characterize the inflammatory response and determine a no-observable effect level (NOEL) in rabbit eyes after endotoxin intravitreal (ITV) injection. Fifty-three naïve male Dutch Belted rabbits were treated with a single 50-μL ITV injection ranging from 0.01 to 0.75 endotoxin units/eye (EU/eye) and monitored for up to 42 days post treatment. Ophthalmic examination included slit-lamp biomicroscopy and indirect ophthalmoscopy. Laser flare photometry was performed in a subset of animals. On days 2, 8, 16, and 43, a subset of animals was necropsied and eyes processed for histopathological evaluation. Intravitreal injection of endotoxin at ≥0.05 EU/eye resulted in a dose-related anterior segment inflammation response. No aqueous flare or cell response was noted in the 0.01 EU/eye dose group. A more delayed posterior segment response characterized by vitreal cell response was observed beginning on day 5, peaking on day 9, and decreasing starting on day 16 that persisted at trace to a level of 1+ on day 43. Microscopy findings of infiltrates of minimal mixed inflammatory cells in the vitreous and subconjunctiva and proteinaceous fluid in the anterior chamber and/or vitreous were observed in eyes given ≥0.1 EU/eye. We defined the NOEL for ITV endotoxin to be 0.01 EU/eye, suggesting that the vitreal cavity is more sensitive to the effects of endotoxin than the anterior segment and aqueous chamber. These data highlight the importance of assessing endotoxin level in intravitreal formulations, as levels as low as 0.05 EU/eye may confound the safety evaluations of intravitreal therapeutics in rabbits.

  10. Characterizing the natural radiation levels throughout the main geological units of Sabkhat al Jabboul area, northern Syria.

    PubMed

    Al-Hilal, Mohamed; Aissa, Mosa

    2015-02-01

    The concentrations of equivalent eU, eTh, and K% were determined together with soil gas radon values and carborne gamma-ray survey in order to define the natural radioactivity levels throughout main geological units of Sabkhat al Jabboul region. Forty five soil and rock samples were collected from various lithofacies in each geological unit, and analyzed by γ-ray spectrometric technique for determining the concentration values of major radioelements. Such radiometric data could be used to differentiate between various lithologies of the investigated rocks. Although no distinct radioactive anomalies were found in the area, the radiometric profiles showed some minor variations with slightly higher values than the normal level. Despite the low radioactivity and the lack of rocks diversity in the surveyed area, it was possible to classify some certain rock types based on their radiometric response. The relationships between eU, eTh and their ratios were discussed for the Quaternary, Neogene and Paleogene formations, in order to evaluate the degree of uranium distribution and remobilization. The overall results of this radiometric survey were generally low, and lying within the range of the normal background levels in Syrian. Copyright © 2014 Elsevier Ltd. All rights reserved.

  11. Utilizing hyaluronic acid as a versatile platform for fluorescence resonance energy transfer-based glucose sensing.

    PubMed

    Ge, Minghao; Bai, Pengli; Chen, Mingli; Tian, Jingjing; Hu, Jun; Zhi, Xu; Yin, Huancai; Yin, Jian

    2018-03-01

    Here, we utilized the ultrasonic emulsification technique to generate hyaluronic acid microspheres incorporating a fluorescence-based glucose biosensor. We synthesized a novel lanthanide ion luminophore based on Eu 3+ . Eu sulfosuccinimidyl dextran (Eu-dextran) and Alexa Fluor 647 sulfosuccinimidyl-ConA (Alexa Fluor 647-ConA) were encapsulated in hyaluronic acid hydrogel to generate microspheres. Glucose sensing was carried out using a fluorescence resonance energy transfer (FRET)-based assay principle. A proportional fluorescence intensity increase was found within a 0.5-10-mM glucose concentration range. The glucose-sensing strategy showed an excellent tolerance for potential interferents. Meanwhile, the fluorescent signal of hyaluronic acid microspheres was very stable after testing for 72 h in glucose solution. Overall, hyaluronic acid microspheres encapsulating sensing biomolecules offer a stable and biocompatible biosensor for a variety of applications including cell culture systems, tissue engineering, detection of blood glucose, etc. Graphical abstract We report an ingenious biosensor encapsulated in hyaluronic acid microspheres for monitoring of glucose. Glucose sensing is carried out using a fluorescence resonance energy transfer-based assay principle with a novel lanthanide ions luminophore. The glucose detection system has excellent biocompatibility and stability for monitoring of glucose.

  12. Airborne endotoxin concentrations at a large open-lot dairy in southern idaho.

    PubMed

    Dungan, Robert S; Leytem, April B

    2009-01-01

    Endotoxins are derived from gram-negative bacteria and are a potential respiratory health risk for animals and humans. To determine the potential for endotoxin transport from a large open-lot dairy, total airborne endotoxin concentrations were determined at an upwind location (background) and five downwind locations on three separate days. The downwind locations were situated at of the edge of the lot, 200 and 1390 m downwind from the lot, and downwind from a manure composting area and wastewater holding pond. When the wind was predominantly from the west, the average endotoxin concentration at the upwind location was 24 endotoxin units (EU) m(-3), whereas at the edge of the lot on the downwind side it was 259 EU m(-3). At 200 and 1390 m downwind from the edge of the lot, the average endotoxin concentrations were 168 and 49 EU m(-3), respectively. Average airborne endotoxin concentrations downwind from the composting site (36 EU m(-3)) and wastewater holding pond (89 EU m(-3)) and 1390 m from the edge of the lot were not significantly different from the upwind location. There were no significant correlations between ambient weather data collected and endotoxin concentrations over the experimental period. The downwind data show that the airborne endotoxin concentrations decreased exponentially with distance from the lot edge. Decreasing an individual's proximity to the dairy should lower their risk of airborne endotoxin exposure and associated health effects.

  13. Endotoxin levels and contribution factors of endotoxins in resident, school, and office environments - A review

    NASA Astrophysics Data System (ADS)

    Salonen, Heidi; Duchaine, Caroline; Létourneau, Valérie; Mazaheri, Mandana; Laitinen, Sirpa; Clifford, Sam; Mikkola, Raimo; Lappalainen, Sanna; Reijula, Kari; Morawska, Lidia

    2016-10-01

    As endotoxin exposure has known effects on human health, it is important to know the generally existing levels of endotoxins as well as their contributing factors. This work reviews current knowledge on the endotoxin loads in settled floor dust, concentrations of endotoxins in indoor air, and different environmental factors potentially affecting endotoxin levels. The literature review consists of peer-reviewed manuscripts located using Google and PubMed, with search terms based on individual words and combinations. References from relevant articles have also been searched. Analysis of the data showed that in residential, school, and office environments, the mean endotoxin loads in settled floor dust varied between 660 and 107,000 EU/m2, 2180 and 48,000 EU/m2, and 2700 and 12,890 EU/m2, respectively. Correspondingly, the mean endotoxin concentrations in indoor air varied between 0.04 and 1610 EU/m3 in residences, and 0.07 and 9.30 EU/m3 in schools and offices. There is strong scientific evidence indicating that age of houses (or housing unit year category), cleaning, farm or rural living, flooring materials (the presence of carpets), number of occupants, the presence of dogs or cats indoors, and relative humidity affect endotoxin loads in settled floor dust. The presence of pets (especially dogs) was extremely strongly associated with endotoxin concentrations in indoor air. However, as reviewed articles show inconsistency, additional studies on these and other possible predicting factors are needed.

  14. Two sodium and lanthanide(III) MOFs based on oxalate and V-shaped 4,4‧-oxybis(benzoate) ligands: Hydrothermal synthesis, crystal structure, and luminescence properties

    NASA Astrophysics Data System (ADS)

    Wang, Chongchen; Guo, Guangliang; Wang, Peng

    2013-01-01

    Two lanthanide based metal-organic frameworks, [NaLn(oba)(ox)(H2O)] (Lndbnd6 Eu(1) and Sm(2)) were obtained from 4,4'-oxybisbenzoic acid, sodium oxalate and corresponding lanthanide salts by hydrothermal synthesis. They were characterized by single-crystal X-ray diffraction, IR spectra, and photoluminescent spectra. The crystallographic data reveals that complexes 1 and 2 are isomorphous and isostructural, composed of three-dimensional framework built up of distorted tricapped trigonal EuO9 units, distorted octahedron NaO6 units, 4,4'-oxybis(benzoate) and oxalate. The carboxylate oxygen atoms of the 4,4'-oxybis(benzoate) and oxalate ligand are coordinated to lanthanide ions and sodium ions, resulting into two-dimensional inorganic sheets, which are further linked into three-dimensional network by organic ligands. Thermogravimetric analyses of 1-2 display a considerable thermal stability. Photoluminescent measurements indicated that europium complex 1 displayed strong red emission.

  15. The EU legislation on "GMOs" between nonsense and protectionism: An ongoing Schumpeterian chain of public choices.

    PubMed

    Tagliabue, Giovanni

    2017-01-02

    The EU regulation of agricultural biotechnology is botched and convoluted: the pseudo-concept of "Genetically Modified Organisms" has no coherent semantic or scientific content. The reasons of the paradox by which the cultivation of "GMOs" is substantially banned in Europe, while enormous quantities of recombinant-DNA cereals and legumes are imported to be used as feedstuff, are explained. The Directive 2015/412, giving Member states the choice to refuse the cultivation of genetically engineered crops at a national or local level, paves the way for a mosaic-like, Harlequinesque form of protectionism: nothing resembling a well-regulated free market. In the meantime, importation of "GMO" feed goes on at full speed all over Europe. A proposal by the Commission to adjust the rules on importation according to those for cultivation has been rejected by the Parliament.This dynamics may be seen as an ongoing "Schumpeterian" chain of public choices: the calculus of consent drives politicians more than a science-based approach to law-making.  The EU should restart from scratch with the right concept, i.e. the careful examination of the pros and cons, the costs and benefits of each new agricultural product ("GMO" or otherwise), freely cultivated and/or imported, assessed case by case, at last acknowledging that the biotech processes used to create new varieties are of no practical or legal relevance. In doing so, the EU would pursue its stated "better regulation" approach, cancelling any sectoral and sectarian regulation.

  16. Population aging and migration - history and UN forecasts in the EU-28 and its east and south near neighborhood - one century perspective 1950-2050.

    PubMed

    Jakovljevic, Mihajlo Michael; Netz, Yael; Buttigieg, Sandra C; Adany, Roza; Laaser, Ulrich; Varjacic, Mirjana

    2018-03-16

    There is a gap in knowledge on long term pace of population aging acceleration and related net-migration rate changes in WHO European Region and its adjacent MENA countries. We decided to compare European Union (EU-28) region with the EU Near Neighborhood Policy Region East and EU Near Neighborhood Policy Region South in terms of these two essential features of third demographic transition. One century long perspective dating back to both historical data and towards reliable future forecasts was observed. United Nation's Department of Economic and Social Affairs estimates on indicators of population aging and migration were observed. Time horizon adopted was 1950-2050. Targeted 44 countries belong to either one of three regions named by EU diplomacy as: European Union or EU-28, EU Near Neighborhood Policy Region East (ENP East) and EU Near Neighborhood Policy Region South (ENP South). European Union region currently experiences most advanced stage of demographic aging. The latter one is the ENP East region dominated by Slavic nations whose fertility decline continues since the USSR Era back in late 1980s. ENP South region dominated by Arab League nations remains rather young compared to their northern counterparts. However, as the Third Demographic Transition is inevitably coming to these societies they remain the spring of youth and positive net emigration rate. Probably the most prominent change will be the extreme fall of total fertility rate (children per woman) in ENP South countries (dominantly Arab League) from 6.72 back in 1950 to medium-scenario forecasted 2.10 in 2050. In the same time net number of migrants in the EU28 (both sexes combined) will grow from - 91,000 in 1950 to + 394,000 in 2050. Long term migration from Eastern Europe westwards and from MENA region northwards is historically present for many decades dating back deep into the Cold War Era. Contemporary large-scale migrations outsourcing from Arab League nations towards rich European Protestant North is probably the peak of an iceberg in long migration routes history. However, in the decades to come acceleration of aging is likely to question sustainability of such movements of people.

  17. Risk formulation for the sonic effects of offshore wind farms on fish in the EU region.

    PubMed

    Kikuchi, Ryunosuke

    2010-02-01

    In 2007, European leaders agreed to source 20% of their energy needs from renewable energy; since that time, offshore wind farms have been receiving attention in the European Union (EU). In 2008, the European Community submitted a proposal to the United Nations Environment Program (UNEP) in order to combat marine noise pollution. In consideration of these facts, the present paper aims to deduce a preliminary hypothesis and its formulation for the effect of offshore wind farm noise on fish. The following general picture is drawn: the short-term potential impact during pre-construction; the short-term intensive impact during construction; and the physiological and/or masking effects that may occur over a long period while the wind farm is in operation. The EU's proposal to UNEP includes noise databases that list the origins of man-made sounds; it is advisable that offshore wind farms should be listed in the noise databases in order to promote rational environment management. Copyright 2009 Elsevier Ltd. All rights reserved.

  18. Partnerships for affordable and equitable disaster insurance

    NASA Astrophysics Data System (ADS)

    Mysiak, J.; Pérez-Blanco, C. D.

    2015-08-01

    Extreme events are becoming more frequent and intense, inflating the economic damages and social hardship set-off by natural catastrophes. Amidst budgetary cuts, there is a growing concern on societies' ability to design solvent disaster recovery strategies, while addressing equity and affordability concerns. The participation of private sector along with public one through Public-Private Partnerships (PPPs) has gained on importance as a means to address these seemingly conflicting objectives through the provision of (catastrophic) natural hazard insurance. This is the case of many OECD countries, notably some EU Member States such as the United Kingdom and Spain. The EU legislator has adapted to this new scenario and recently produced major reforms in the legislation and regulation that govern the framework in which PPPs for (catastrophic) natural hazard insurance develop. This paper has a dual objective: (1) review the complex legal background that rules the provision of insurance against natural catastrophes in the EU after these major reforms, (2) assess the implications of the reforms and offer concise Policy Guiding Principles.

  19. Metal Coordination Stoichiometry Controlled Formation of Linear and Hyperbranched Supramolecular Polymers.

    PubMed

    Lin, Cuiling; Xu, Luonan; Huang, Libo; Chen, Jia; Liu, Yuanyuan; Ma, Yifan; Ye, Feixiang; Qiu, Huayu; He, Tian; Yin, Shouchun

    2016-09-01

    Controlling the topologies of polymers is a hot topic in polymer chemistry because the physical and/or chemical properties of polymers are determined (at least partially) by their topologies. This study exploits the host-guest interactions between dibenzo-24-crown-8 and secondary ammonium salts and metal coordination interactions between 2,6-bis(benzimidazolyl)-pyridine units with metal ions (Zn(II) and/or Eu(III) ) as orthogonal non-covalent interactions to prepare supramolecular polymers. By changing the ratios of the metal ion additives (Zn(NO3 )2 and Eu(NO3 )3 ) linkers to join the host-guest dimeric complex, the linear supramolecular polymers (100 mol% Zn(NO3 )2 per ligand) and hyperbranched supramolecular polymers (97 mol% Zn(NO3 )2 and 3 mol% Eu(NO3 )3 per ligand) are separately and successfully constructed. This approach not only expands topological control over polymeric systems, but also paves the way for the functionalization of smart and adaptive materials. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. EU-UNAWE Project: Inspiring every child with our wonderful cosmos

    NASA Astrophysics Data System (ADS)

    Arisa, E.; Fabregat, J.; Ros, R. M.

    2013-05-01

    The Project UNAWE was born in 2005 with the intention that children, of every country and every economical and social condition, can be in touch with astronomy. This is the first large-scale attempt to use astronomy as a tool to inspire and educate very young children. Project resources are open to everyone, but are mainly tailored to boys and girls aged 4 to 10. The Project is implemented in countries from all over the world, supporting the activities that are performed there. The European project EU-UNAWE funded by the European Union, includes six countries: Germany, Italy, the Netherlands, United Kingdom, South Africa and Spain. EU-UNAWE Spain bases its activity in conducting training courses for teachers: in Barcelona in November 2011, in Granada and Madrid in February 2012 and in Pamplona in May 2012. Just as in the publication of educational materials: practical activities, experiences, books made by teachers... available in the entire Spanish-speaking world. All this can be accessed through the website of the program (http://es.unawe.org).

  1. Pediatric Medicine Development: An Overview and Comparison of Regulatory Processes in the European Union and United States

    PubMed Central

    Penkov, Dobromir; Tomasi, Paolo; Eichler, Irmgard; Murphy, Dianne; Yao, Lynne P.; Temeck, Jean

    2017-01-01

    Pediatric legislation in the US and the EU is driving pediatric product development on an international scale. To facilitate harmonization and global development of pediatric medicines, it is important to understand the legislative requirements that must be met along with incentives that exist in the US and the EU to include pediatric patients in therapeutic clinical trials. Although there are many similarities, differences exist. This review is an effort to enhance understanding of the pediatric legislation in both regions. It is intended as an overview to supplement the region-specific legislation and guidance documents that are available on the websites of the US Food and Drug Administration (FDA) and the European Medicines Agency (EMA). Despite differences, the goal of the legislation in both the EU and the US is to incentivize and require timely, ethical, and sound scientific development of pharmaceutical products for the pediatric population and to provide information for their safe and effective use. PMID:28674673

  2. Synthesis and characterization of polymorphs of photoluminescent Eu(III)-(2,5-furandicarboxylic acid, oxalic acid) MOFs

    NASA Astrophysics Data System (ADS)

    Shi, Fa-Nian; Ananias, Duarte; Yang, Ting-Hai; Rocha, João

    2013-08-01

    A novel metal organic framework (MOF) formulated as [Eu(H2O)2(fdc)(ox)0.5·(H2O)]n (1, fdc2-=2,5-furandicarboxylate, ox2-=oxalate), was hydrothermally synthesized via in situ ox2- generation from the partial decomposition of the fdc2- ligand. This material crystallizes in the monoclinic space group C2/c, unit cell parameters of 1: a=16.7570(10), b=10.5708(7), c=13.5348(14) Å, β=116.917(2)° (Z=8), and exhibits a three-dimensional (3D)-porous framework, with guest water molecules residing in the channel linking all other ligands (H2O, ox2-and fdc2-) via hydrogen bonding interactions. Compound 2 is a polymorph of 1 crystallizing in monoclinic P21/c space group. The photoluminescence properties of 1 and 2 were studied at room temperature. The spectra show the typical Eu3+ red emission and the differences observed reflects the slightly different structures of these polymorphs.

  3. Analyzing interaction of electricity markets and environmental policies using equilibrium models

    NASA Astrophysics Data System (ADS)

    Chen, Yihsu

    Around the world, the electric sector is evolving from a system of regulated vertically-integrated monopolies to a complex system of competing generation companies, unregulated traders, and regulated transmission and distribution. One emerging challenge faced by environmental policymakers and electricity industry is the interaction between electricity markets and environmental policies. The objective of this dissertation is to examine these interactions using large-scale computational models of electricity markets based on noncooperative game theory. In particular, this dissertation is comprised of four essays. The first essay studies the interaction of the United States Environmental Protection Agency NOx Budget Program and the mid-Atlantic electricity market. This research quantifies emissions, economic inefficiencies, price distortions, and overall social welfare under various market assumptions using engineering-economic models. The models calculate equilibria for imperfectly competitive markets---Cournot oligopoly---considering the actual landscape of power plants and transmission lines, and including the possibility of market power in the NOx allowances market. The second essay extends the results from first essay and models imperfectly competitive markets using a Stackelberg or leader-follower formulation. A leader in the power and NO x markets is assumed to have perfect foresight of its rivals' responses. The rivals' best response functions are explicitly embedded in the leader's constraints. The solutions quantify the extent to which a leader in the markets can extract economic rents on the expense of its followers. The third essay investigates the effect of implementing the European Union (EU) CO2 Emissions Trading Scheme (ETS) on wholesale power prices in the Western European electricity market. This research uses theoretical and computational modeling approaches to quantify the degree to which CO2 costs were passed on to power prices, and quantifies the windfall profits earned by generators under the current EU allowances allocation method. The results show that the generators in EU could earn substantial windfall profits from two sources: free emissions allowances and increased gross margin among inframarginal generating units. The fourth essay examines effect of climate change on future pollution emissions from regional electricity markets, accounting for how climate influences demand profiles and generation efficiencies. This research illustrates that even when seasonal/annual pollution emissions are limited by regulatory caps, significant increases in emissions during high-demand hours could potentially lead to an increase in the occurrences of acute ozone episodes, which worsen public health during summer months. The major contributions of this dissertation are two fold. First, the methodological and computational framework developed in the research provides a basis for understanding complex interactions among several oligopolistic markets and climate policies. Second, the outcomes of the research reinforce the need for careful monitoring of market interactions and a thorough examination of the design of allowances and power markets.

  4. Software Development for EECU Platform of Turbofan Engine

    NASA Astrophysics Data System (ADS)

    Kim, Bo Gyoung; Kwak, Dohyup; Kim, Byunghyun; Choi, Hee ju; Kong, Changduk

    2017-04-01

    The turbofan engine operation consists of a number of hardware and software. The engine is controlled by Electronic Engine Control Unit (EECU). In order to control the engine, EECU communicates with an aircraft system, Actuator Drive Unit (ADU), Engine Power Unit (EPU) and sensors on the engine. This paper tried to investigate the process form starting to taking-off and aims to design the EECU software mode and defined communication data format. The software is implemented according to the designed software mode.

  5. 46 CFR 11.540 - Endorsements for engineers of mobile offshore drilling units.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 1 2013-10-01 2013-10-01 false Endorsements for engineers of mobile offshore drilling units. 11.540 Section 11.540 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE... § 11.540 Endorsements for engineers of mobile offshore drilling units. Endorsements as chief engineer...

  6. 46 CFR 11.540 - Endorsements for engineers of mobile offshore drilling units.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 1 2012-10-01 2012-10-01 false Endorsements for engineers of mobile offshore drilling units. 11.540 Section 11.540 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE... § 11.540 Endorsements for engineers of mobile offshore drilling units. Endorsements as chief engineer...

  7. 46 CFR 11.540 - Endorsements for engineers of mobile offshore drilling units.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Endorsements for engineers of mobile offshore drilling units. 11.540 Section 11.540 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE... § 11.540 Endorsements for engineers of mobile offshore drilling units. Endorsements as chief engineer...

  8. 46 CFR 11.540 - Endorsements for engineers of mobile offshore drilling units.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 1 2011-10-01 2011-10-01 false Endorsements for engineers of mobile offshore drilling units. 11.540 Section 11.540 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE... § 11.540 Endorsements for engineers of mobile offshore drilling units. Endorsements as chief engineer...

  9. AOP Wiki: A new tool for developing and documenting adverse outcome pathways

    EPA Science Inventory

    An initial version of an IT system to support OECD AOP activities recently was completed through collaborative efforts and contributions of the European Commission's Joint Research Centre (EU JRC), the Office of Research and Development (ORD) of the United States Environmental Pr...

  10. Globalisation, Transnational Policies and Adult Education

    ERIC Educational Resources Information Center

    Milana, Marcella

    2012-01-01

    Globalisation, transnational policies and adult education--This paper examines policy documents produced by the United Nations Educational, Scientific and Cultural Organization (UNESCO) and the European Union (EU) in the field of adult education and learning. Both these entities address adult education as an explicit object of policy. This paper…

  11. Highway Safety Information System guidebook for the Maine state data files. Volume 2 : single variable tabulations

    DOT National Transportation Integrated Search

    2012-10-01

    The United States and European Union (EU) share many of the same transportation research issues, challenges, and goals. They also share a belief that cooperative vehicle (also termed connected vehicle) systems, based on vehicle-to-vehicle and vehicle...

  12. Evaluating U.S. and EU Trans Sahel Policies

    DTIC Science & Technology

    2013-03-01

    elected leaders as well as young Africans who are leaders in civil society and entrepreneurship . Protecting Human Rights, Civil Society, and...GSPC: Newest Franchise in al-Qa‘ida‘s Global Jihad,‖ The Combating Terrorism Center, United States Military Academy, West Point, April 2007, 2. 40

  13. Globalisation, transnational policies and adult education

    NASA Astrophysics Data System (ADS)

    Milana, Marcella

    2012-12-01

    Globalisation, transnational policies and adult education - This paper examines policy documents produced by the United Nations Educational, Scientific and Cultural Organization (UNESCO) and the European Union (EU) in the field of adult education and learning. Both these entities address adult education as an explicit object of policy. This paper investigates how globalisation processes are constructed as policy problems when these transnational political agents propose adult education as a response. The author's main argument is that while UNESCO presents the provision of adult education as a means for governments worldwide to overcome disadvantages experienced by their own citizenry, the EU institutionalises learning experiences as a means for governments to sustain regional economic growth and political expansion. After reviewing the literature on globalisation to elucidate the theories that inform current understanding of contemporary economic, political, cultural and ecological changes as political problems, she presents the conceptual and methodological framework of her analysis. The author then examines the active role played by UNESCO and the EU in promoting adult education as a policy objective at transnational level, and unpacks the specific problem "representations" that are substantiated by these organisations. She argues that UNESCO and EU processes assign specific values and meanings to globalisation, and that these reflect a limited understanding of the complexity of globalisation. Finally, she considers two of the effects produced by these problem representations.

  14. Implementing the US air quality standard for PM2.5 worldwide can prevent millions of premature deaths per year.

    PubMed

    Giannadaki, Despina; Lelieveld, Jos; Pozzer, Andrea

    2016-08-23

    Air pollution by fine aerosol particles is among the leading causes of poor health and premature mortality worldwide. The growing awareness of this issue has led several countries to implement air pollution legislation. However, populations in large parts of the world are still exposed to high levels of ambient particulate pollution. The main aim of this work is to evaluate the potential impact of implementing current air quality standards for fine particulate matter (PM2.5) in the European Union (EU), United States (US) and other countries where PM2.5 levels are high. We use a high-resolution global atmospheric chemistry model combined with epidemiological concentration response functions to investigate premature mortality attributable to PM2.5 in adults ≥30 years and children <5 years. We perform sensitivity studies to estimate the reductions in mortality that could be achieved if the PM2.5 air quality standards of the EU and US and other national standards would be implemented worldwide. We estimate the global premature mortality by PM2.5 at 3.15 million/year in 2010. China is the leading country with about 1.33 million, followed by India with 575 thousand and Pakistan with 105 thousand per year. For the 28 EU member states we estimate 173 thousand and for the United States 52 thousand premature deaths in 2010. Based on sensitivity analysis, applying worldwide the EU annual mean standard of 25 μg/m(3) for PM2.5 could reduce global premature mortality due to PM2.5 exposure by 17 %; while within the EU the effect is negligible. With the 2012 revised US standard of 12 μg/m(3) premature mortality by PM2.5 could drop by 46 % worldwide; 4 % in the US and 20 % in the EU, 69 % in China, 49 % in India and 36 % in Pakistan. These estimates take into consideration that about 22 % of the global PM2.5 related mortality cannot be avoided due to the contribution of natural PM2.5 sources, mainly airborne desert dust and PM2.5 from wild fires. Our results reflect the need to adopt stricter limits for annual mean PM2.5 levels globally, like the US standard of 12 μg/m(3) or an even lower limit to substantially reduce premature mortality in most of the world.

  15. 46 CFR 11.540 - Endorsements as engineers of mobile offshore drilling units (MODUs).

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 1 2014-10-01 2014-10-01 false Endorsements as engineers of mobile offshore drilling units (MODUs). 11.540 Section 11.540 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT... Engineer Officer Endorsements § 11.540 Endorsements as engineers of mobile offshore drilling units (MODUs...

  16. Micro-cogeneration units based on Stirling engine for heating and their real operation

    NASA Astrophysics Data System (ADS)

    Čierny, Jaroslav; Patsch, Marek

    2014-08-01

    This article was deal with micro-cogeneration units based on Stirling engine. We watched problematic of real working Stirling engine. The article also contain hookup of unit constructed at University of Zilina.

  17. 76 FR 33703 - Submission for OMB Review; Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-09

    ...) administers the U.S.-European Union (EU) and U.S.- Swiss Safe Harbor Frameworks (Frameworks). These Frameworks allow U.S. companies to meet the requirements of the European Union's Data Protection Directive and the...: International Trade Administration. Title: Survey of Participating Companies in the United States- European...

  18. Integration and Disintegration: A Political Geography of the European Union.

    ERIC Educational Resources Information Center

    Davidson, Fiona M.

    1997-01-01

    Describes the somewhat contradictory movements towards political and economic integration and political decentralization in the European Union (EU). Discusses the implications of those trends for the future of the sovereign state, specifically for Spain, France, and the United Kingdom. Maintains that political power is being wrested away from core…

  19. Evaluation of Bacteroides fragilis GB-124 bacteriophages as novel human-associated faecal indicators in the United States

    EPA Science Inventory

    Phages infecting human-associated Bacteroides fragilis (GB-124 phages) have been employed in the European Union (EU) to identify human fecal pollution, but their utility for U.S. was unclear. Primary sewage effluent samples were collected seasonally from seven wastewater treatme...

  20. Container Security: A Proposal for a Comprehensive Code of Conduct

    DTIC Science & Technology

    2005-01-01

    the CTPAT . • U.S. Customs will offer potential benefits to C-TPAT members, including: a reduced number of inspections (reduced border times); an...in mind and building upon previous activities by the United States (CSI, CTPAT and PSI), the EU, and international organizations such as the WCO and

  1. Passive Sampling in Regulatory Chemical Monitoring of Nonpolar Organic Compounds in the Aquatic Environment

    EPA Science Inventory

    We reviewed compliance monitoring requirements in the European Union (EU), the United States(USA), and the Oslo-Paris Convention for the protection of the marine environment of the North-East Atlantic (OSPAR), and evaluated if these are met by passive sampling methods for nonpola...

  2. Transatlantic Moves to the Market: The United States and the European Union

    ERIC Educational Resources Information Center

    Slaughter, Sheila; Cantwell, Brendan

    2012-01-01

    The theory of academic capitalism is used to explore US and EU marketization trajectories. Comparisons are made along the following dimensions: creation and expansion of intermediating organizations external to universities that promote closer relations between universities and markets; interstitial organizations that emerge from within…

  3. Precision and accuracy of luminescence lifetime-based phosphor thermometry: A case study of Eu(III):YSZ

    NASA Astrophysics Data System (ADS)

    Heeg, B.; Jenkins, T. P.

    2013-09-01

    Laser induced phosphor thermometry as a reliable technique requires an analysis of factors controlling or contributing to the precision and accuracy of a measurement. In this paper, we discuss several critical design parameters in the development of luminescence lifetime-based phosphor thermometry instrumentation for use at elevated temperatures such as encountered in hot sections of gas turbine engines. As precision is predominantly governed by signal and background photon shot noise and detector noise, a brief summary is presented of how these noise contributions may affect the measurement. Accuracy, on the other hand, is governed by a range of effects including, but not limited to, detector response characteristics, laser-induced effects, the photo-physics of the sensor materials, and also the method of data reduction. The various possible outcomes of measurement precision and accuracy are discussed with luminescence lifetime measurements on Eu(III):YSZ sensor coatings.

  4. Enhancing environmental engineering education in Europe

    NASA Astrophysics Data System (ADS)

    Caporali, Enrica; Tuneski, Atanasko

    2013-04-01

    In the frame of knowledge triangle: education-innovation-research, the environmental engineering higher education is here discussed with reference to the TEMPUS-Trans European Mobility Programme for University Studies promoted by the European Commission. Among the focused aspects of TEMPUS are curricula harmonization and lifelong learning programme development in higher education. Two are the curricula, since the first TEMPUS project, coordinated in the period 2005-2008 by University of Firenze in cooperation with colleagues of the Ss Cyril and Methodius University, Skopje. The second three years TEMPUS Joint Project denominated DEREL-Development of Environment and Resources Engineering Learning, is active since October 2010. To the consortium activities participate 4 EU Universities (from Italy, Greece, Germany and Austria), 7 Partner Countries (PC) Universities (from FYR of Macedonia, Serbia and Albania), and 1 PC Ministry, 4 PC National Agencies, 1 PC non governmental organization and 1 PC enterprise. The same 4 EU Universities and the same Macedonian Institutions participated at the first TEMPUS JEP entitled DEREC-Development of Environmental and Resources Engineering Curriculum. Both the first and second cycle curriculum, developed through the co-operation, exchange of know-how and expertise between partners, are based on the European Credit Transfer System and are in accordance with the Bologna Process. Within DEREC a new three-years first cycle curriculum in Environmental and Resources Engineering was opened at the University Ss Cyril and Methodius, Skopje, and the necessary conditions for offering a Joint Degree Title, on the basis of an agreement between the Ss. Cyril and Methodius University and the University of Firenze, were fulfilled. The running DEREL project, as a continuation of DEREC, is aimed to introduce a new, up-to-date, postgraduate second cycle curriculum in Environment and Resources Engineering at the Ss Cyril and Methodius University in Skopje, FYR of Macedonia, University of Novi Sad, Serbia and Polytechnic University of Tirana, Albania, following the criteria and conditions for setting up a Joint Postgraduate Degree. The new second cycle degree curriculum has been just activated in the current academic year 2012/2013. In DEREL a second objective is to implement a sustainable regional network aimed to offer lifelong learning seminars for environment and resources engineering education and training of interested stakeholders and organize workshops focused on strengthening the links in the knowledge triangle: environment education-innovation-research, with participation of postgraduate students, public services, enterprises and NGO's.

  5. Surveillance efforts after mass drug administration to validate elimination of lymphatic filariasis as a public health problem in Vanuatu.

    PubMed

    Taleo, Fasihah; Taleo, George; Graves, Patricia M; Wood, Peter; Kim, Sung Hye; Ozaki, Masayo; Joseph, Hayley; Chu, Brian; Pavluck, Alex; Yajima, Aya; Melrose, Wayne; Ichimori, Kazuyo; Capuano, Corinne

    2017-01-01

    Vanuatu was formerly highly endemic for lymphatic filariasis (LF), caused by Wuchereria bancrofti and transmitted by Anopheles mosquitoes. After a baseline survey showing 4.8% antigen prevalence in 1998, the country conducted nationwide (in one implementation unit) annual mass drug administration (MDA) with albendazole and diethylcarbamazine citrate from 2000 to 2004 and achieved prevalence of 0.2% by 2006 in a representative nationwide cluster survey among all age groups. Post MDA surveillance was conducted from 2006 to 2012. After MDA, the country was divided for surveillance into three evaluation units (EUs) formed by grouping provinces according to baseline prevalence: EU1: Torba, Sanma and Malampa; EU2: Penama; EU3: Shefa and Tafea. The study compiled all past data and information on surveys in Vanuatu from the country programme. This paper reviews the surveillance activities done after stopping MDA to validate the interruption of transmission and elimination of LF as a public health problem. Post-MDA surveillance consisting of at least three transmission assessment surveys (TAS) in each of the three EUs was conducted between 2006 and 2012. Sentinel and spot check surveys identified a few villages with persistent high prevalence; all antigen positive cases in these sites were treated and additional targeted MDA conducted for 3 years in 13 villages in one area of concern. All three EUs passed all TAS in 2007, 2010 and 2012 respectively, with no positives found except in EU2 (Penama province) in 2012 when 2 children tested positive for circulating filariasis antigen. Assessment of the burden of chronic filariasis morbidity found 95 cases in 2003 and 32 remaining cases in 2007, all aged over 60 years. Vanuatu has achieved validation of elimination of LF as a public health problem. Post-validation surveillance is still recommended especially in formerly highly endemic areas.

  6. Public health impacts of combustion emissions in the United Kingdom.

    PubMed

    Yim, Steve H L; Barrett, Steven R H

    2012-04-17

    Combustion emissions are a major contributor to degradation of air quality and pose a risk to human health. We evaluate and apply a multiscale air quality modeling system to assess the impact of combustion emissions on UK air quality. Epidemiological evidence is used to quantitatively relate PM(2.5) exposure to risk of early death. We find that UK combustion emissions cause ∼13,000 premature deaths in the UK per year, while an additional ∼6000 deaths in the UK are caused by non-UK European Union (EU) combustion emissions. The leading domestic contributor is transport, which causes ∼7500 early deaths per year, while power generation and industrial emissions result in ∼2500 and ∼830 early deaths per year, respectively. We estimate the uncertainty in premature mortality calculations at -80% to +50%, where results have been corrected by a low modeling bias of 28%. The total monetized life loss in the UK is estimated at £6-62bn/year or 0.4-3.5% of gross domestic product. In Greater London, where PM concentrations are highest and are currently in exceedance of EU standards, we estimate that non-UK EU emissions account for 30% of the ∼3200 air quality-related deaths per year. In the context of the European Commission having launched infringement proceedings against the UK Government over exceedances of EU PM air quality standards in London, these results indicate that further policy measures should be coordinated at an EU-level because of the strength of the transboundary component of PM pollution.

  7. An overview of EU and USA intestinal transplant current activity.

    PubMed

    Lauro, A; Panaro, F; Iyer, K R

    2017-04-01

    To report the current activity of intestinal transplantation in Europe (EU) and Unites States of America (USA), underlining outcomes in the last 5 years and discussing possible trends. Data review of results was performed through analysis of ITR and UNOS registries, Eurotransplant and newsletter transplant reports, congress abstracts, international published literature, personal communications and hospital web sites. The absence in Europe of a sole organization collecting donors and the presence of many low-volume centers (less than 5 cases/year) makes the difference with USA: in the last 5 years (2010-2014), 222 intestinal/multivisceral transplants have been performed in EU countries (most of them in the UK), while in USA, the number of transplants achieved 634 procedures in the same period of time. Waiting list mortality remains unacceptable in both continents. Improved short-term results, with over 80% survival at 1 year, have been achieved in the busiest transplant centers likely due to immune-induction agents, more recently to innovative cross match strategies and optimizing organ allocation, but long term outcomes are still inferior to other organ transplants. Most long-term survivors were reintegrated to society with self-sustained socioeconomic status. The economic burden for the society is high and related costs are different between USA and EU (and inside Europe between member state's health-care systems), but cost-effectiveness for intestinal transplantation still needs to be proved. Overall intestinal transplantation continues to develop in EU and USA together with surgical and medical rehabilitation of patients affected by short gut syndrome. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  8. Rationale and design of MUSIC OS-EU: an international observational study of the treatment of postmenopausal women for osteoporosis in Europe and Canada.

    PubMed

    Modi, Ankita; Sen, Shuvayu; Adachi, Jonathan D; Adami, Silvano; Cortet, Bernard; Cooper, Alun L; Geusens, Piet; Mellström, Dan; Weaver, Jessica P; van den Bergh, Joop P; Nguyen, Allison M; Keown, Paul A; Leung, Albert T; Sajjan, Shiva

    2015-01-01

    The Medication Use Patterns, Treatment Satisfaction, and Inadequate Control of Osteoporosis Study (MUSIC OS-EU) was designed to better understand the rate and burden of gastrointestinal (GI) events on clinical and health care outcomes among postmenopausal women with osteoporosis. MUSIC OS-EU is a prospective, multinational, observational cohort study of postmenopausal women ≥50 years of age diagnosed with osteoporosis and enrolled in physician clinics in six countries: France, Italy, the Netherlands, Sweden, the United Kingdom, and Canada. The MUSIC OS-EU study has three components: (i) a physician survey to describe their management of osteoporotic patients with GI events; (ii) a retrospective chart survey to describe the receipt and type of osteoporosis medication prescribed; and (iii) a prospective cohort study including untreated and treated patients diagnosed with osteoporosis to investigate the rate of GI events and association with osteoporosis medication use patterns, health-related quality of life, treatment satisfaction and resource utilisation among postmenopausal women with osteoporosis. Physicians at 97 sites completed the physician questionnaire and data for 716 patients were abstracted for the retrospective chart review. Enrolment and the baseline data collection for the prospective cohort study were conducted between March 2012 and June 2013 for 292 untreated and 2,959 treated patients, of whom 684 were new users and 2,275 were experienced users of oral osteoporosis medications. The results of MUSIC OS-EU will illuminate the association of GI events with the management of osteoporosis and with patient-reported outcomes among postmenopausal women with osteoporosis in Europe and Canada.

  9. On-road and laboratory emissions of NO, NO2, NH3, N2O and CH4 from late-model EU light utility vehicles: Comparison of diesel and CNG.

    PubMed

    Vojtíšek-Lom, Michal; Beránek, Vít; Klír, Vojtěch; Jindra, Petr; Pechout, Martin; Voříšek, Tomáš

    2018-03-01

    Exhaust emissions of eight Euro 6 light duty vehicles - two station wagons and six vans - half powered by diesel fuel and half by compressed natural gas (CNG) were examined using both chassis dynamometer and on-road testing. A portable on-board FTIR analyzer was used to measure concentrations of reactive nitrogen compounds - NO, NO 2 and ammonia, of CO, formaldehyde, acetaldehyde and greenhouse gases CO 2 , methane and N 2 O. Exhaust flow was inferred from engine control unit data. Total emissions per cycle were compared and found to be in good agreement with laboratory measurements of NO X , CO and CO 2 during dynamometer tests. On diesel engines, mean NO X emissions were 136-1070mg/km in the laboratory and 537-615mg/km on the road, in many cases nearly an order of magnitude higher compared to the numerical value of the Euro 6 limit. Mean N 2 O emissions were 3-19mg/km and were equivalent to several g/km CO 2 . The measurements suggest that NO X and N 2 O emissions from late-model European light utility vehicles with diesel engines are non-negligible and should be continuously assessed and scrutinized. High variances in NO X emissions among the tested diesel vehicles suggest that large number of vehicles should be tested to offer at least some insights about distribution of fleet emissions among vehicles. CNG engines exhibited relatively low emissions of NO X (12-186mg/km) and NH 3 (10-24mg/km), while mean emissions of methane were 18-45mg/km, under 1g/km CO 2 equivalent, and N 2 O, CO, formaldehyde and acetaldehyde were negligible. The combination of a relatively clean-burning fuel, modern engine technology and a three-way catalyst has resulted in relatively low emissions under the wide variety of operating conditions encountered during the tests. The on-board FTIR has proven to be a useful instrument capable of covering, with the exception of total hydrocarbons, essentially all gaseous pollutants of interest. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. EU pharmaceutical expenditure forecast.

    PubMed

    Urbinati, Duccio; Rémuzat, Cécile; Kornfeld, Åsa; Vataire, Anne-Lise; Cetinsoy, Laurent; Aballéa, Samuel; Mzoughi, Olfa; Toumi, Mondher

    2014-01-01

    With constant incentives for healthcare payers to contain their pharmaceutical budgets, forecasting has become critically important. Some countries have, for instance, developed pharmaceutical horizon scanning units. The objective of this project was to build a model to assess the net effect of the entrance of new patented medicinal products versus medicinal products going off-patent, with a defined forecast horizon, on selected European Union (EU) Member States' pharmaceutical budgets. This model took into account population ageing, as well as current and future country-specific pricing, reimbursement, and market access policies (the project was performed for the European Commission; see http://ec.europa.eu/health/healthcare/key_documents/index_en.htm). In order to have a representative heterogeneity of EU Member States, the following countries were selected for the analysis: France, Germany, Greece, Hungary, Poland, Portugal, and the United Kingdom. A forecasting period of 5 years (2012-2016) was chosen to assess the net pharmaceutical budget impact. A model for generics and biosimilars was developed for each country. The model estimated a separate and combined effect of the direct and indirect impacts of the patent cliff. A second model, estimating the sales development and the risk of development failure, was developed for new drugs. New drugs were reviewed individually to assess their clinical potential and translate it into commercial potential. The forecast was carried out according to three perspectives (healthcare public payer, society, and manufacturer), and several types of distribution chains (retail, hospital, and combined retail and hospital). Probabilistic and deterministic sensitivity analyses were carried out. According to the model, all countries experienced drug budget reductions except Poland (+€41 million). Savings were expected to be the highest in the United Kingdom (-€9,367 million), France (-€5,589 million), and, far behind them, Germany (-€831 million), Greece (-€808 million), Portugal (-€243 million), and Hungary (-€84 million). The main source of savings came from the cardiovascular, central nervous system, and respiratory areas and from biosimilar entries. Oncology, immunology, and inflammation, in contrast, lead to additional expenditure. The model was particularly sensitive to the time to market of branded products, generic prices, generic penetration, and the distribution of biosimilars. The results of this forecast suggested a decrease in pharmaceutical expenditure in the studied period. The model was sensitive to pharmaceutical policy decisions.

  11. EU pharmaceutical expenditure forecast

    PubMed Central

    Urbinati, Duccio; Rémuzat, Cécile; Kornfeld, Åsa; Vataire, Anne-Lise; Cetinsoy, Laurent; Aballéa, Samuel; Mzoughi, Olfa; Toumi, Mondher

    2014-01-01

    Background and Objectives With constant incentives for healthcare payers to contain their pharmaceutical budgets, forecasting has become critically important. Some countries have, for instance, developed pharmaceutical horizon scanning units. The objective of this project was to build a model to assess the net effect of the entrance of new patented medicinal products versus medicinal products going off-patent, with a defined forecast horizon, on selected European Union (EU) Member States’ pharmaceutical budgets. This model took into account population ageing, as well as current and future country-specific pricing, reimbursement, and market access policies (the project was performed for the European Commission; see http://ec.europa.eu/health/healthcare/key_documents/index_en.htm). Method In order to have a representative heterogeneity of EU Member States, the following countries were selected for the analysis: France, Germany, Greece, Hungary, Poland, Portugal, and the United Kingdom. A forecasting period of 5 years (2012–2016) was chosen to assess the net pharmaceutical budget impact. A model for generics and biosimilars was developed for each country. The model estimated a separate and combined effect of the direct and indirect impacts of the patent cliff. A second model, estimating the sales development and the risk of development failure, was developed for new drugs. New drugs were reviewed individually to assess their clinical potential and translate it into commercial potential. The forecast was carried out according to three perspectives (healthcare public payer, society, and manufacturer), and several types of distribution chains (retail, hospital, and combined retail and hospital). Probabilistic and deterministic sensitivity analyses were carried out. Results According to the model, all countries experienced drug budget reductions except Poland (+€41 million). Savings were expected to be the highest in the United Kingdom (−€9,367 million), France (−€5,589 million), and, far behind them, Germany (−€831 million), Greece (−€808 million), Portugal (−€243 million), and Hungary (−€84 million). The main source of savings came from the cardiovascular, central nervous system, and respiratory areas and from biosimilar entries. Oncology, immunology, and inflammation, in contrast, lead to additional expenditure. The model was particularly sensitive to the time to market of branded products, generic prices, generic penetration, and the distribution of biosimilars. Conclusions The results of this forecast suggested a decrease in pharmaceutical expenditure in the studied period. The model was sensitive to pharmaceutical policy decisions. PMID:27226837

  12. Biomimetic Oscillating Foil Propulsion to Enhance Underwater Vehicle Agility and Maneuverability

    DTIC Science & Technology

    2008-06-01

    Blake, A.W. Trites, and K.H.S. Chan. Turning maneuvers in steller sea lions (eumatopias jubatus). Marine Mammal Science, 23(1):94-109, 2007. [10] E.G...degree of Doctor of Philosophy in Oceanographic and Mechanical Engineering Abstract Inspired by the swimming abilities of marine animals, this thesis...with various conventional thruster /control sur- face combinations, as well as sealion (Zalophus californianus and Eu- matopias jubatus ) turning rates

  13. The EU Arms Embargo on China, from 2001 to the Present: Implications for the United States

    DTIC Science & Technology

    2008-06-01

    navigation, tourism , and a “new mechanism for industrial policy dialogue.” In January 2004 China and France agreed to a “joint declaration to deepen...claim to contribute materially to the key defense issues in the region.”15 Second, European defense industries lack the massive domestic sales of...interests that lies at the heart of United States laws for transatlantic defense cooperation at both the governmental and industrial levels and would

  14. The EU legislation on “GMOs” between nonsense and protectionism: An ongoing Schumpeterian chain of public choices

    PubMed Central

    Tagliabue, Giovanni

    2017-01-01

    ABSTRACT The EU regulation of agricultural biotechnology is botched and convoluted: the pseudo-concept of “Genetically Modified Organisms” has no coherent semantic or scientific content. The reasons of the paradox by which the cultivation of “GMOs” is substantially banned in Europe, while enormous quantities of recombinant-DNA cereals and legumes are imported to be used as feedstuff, are explained. The Directive 2015/412, giving Member states the choice to refuse the cultivation of genetically engineered crops at a national or local level, paves the way for a mosaic-like, Harlequinesque form of protectionism: nothing resembling a well-regulated free market. In the meantime, importation of “GMO” feed goes on at full speed all over Europe. A proposal by the Commission to adjust the rules on importation according to those for cultivation has been rejected by the Parliament.This dynamics may be seen as an ongoing “Schumpeterian” chain of public choices: the calculus of consent drives politicians more than a science-based approach to law-making.  The EU should restart from scratch with the right concept, i.e. the careful examination of the pros and cons, the costs and benefits of each new agricultural product (“GMO” or otherwise), freely cultivated and/or imported, assessed case by case, at last acknowledging that the biotech processes used to create new varieties are of no practical or legal relevance. In doing so, the EU would pursue its stated “better regulation” approach, cancelling any sectoral and sectarian regulation. PMID:28001470

  15. A Summary of the United States Food and Drug Administrations’ Food Safety Program for Imported Seafood; One Country’s Approach

    PubMed Central

    Koonse, Brett

    2016-01-01

    It is well known that the vast majority of seafood is captured or farmed in emerging countries and exported to developed countries. This has resulted in seafood being the number one traded food commodity in the world. Food safety is essential to this trade. Exporting countries should understand the regulatory food safety programs of the countries they ship to in order to comply with their applicable laws and regulations to avoid violations and disruptions in trade. The United States (U.S.) imports more seafood than any individual country in the world but the European Union (E.U.) countries, as a block, import significantly more. Each importing country has its own programs and systems in place to ensure the safety of imported seafood. However, most countries that export seafood have regulatory programs in place that comply with the import requirements of the E.U. The purpose of this paper is to describe the United States Food and Drug Administration’s (USFDA) imported seafood safety program. The primary audience for the information is foreign government regulators, seafood exporters, and U.S. importers. It can also give consumers confidence that f U.S. seafood is safe no matter which country it originates from. PMID:28231127

  16. Red emission phosphor for real-time skin dosimeter for fluoroscopy and interventional radiology

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nakamura, Masaaki, E-mail: QYJ05476@nifty.com; Chida, Koichi; Zuguchi, Masayuki

    2014-10-15

    Purpose: There are no effective real-time direct skin dosimeters for interventional radiology. Such a scintillation dosimeter would be available if there was a suitable red emission phosphor in the medical x-ray range, since the silicon photodiode is a highly efficient device for red light. However, it is unknown whether there is a suitable red emission phosphor. The purpose of this study is to find a suitable red emission phosphor that can be used in x-ray dosimeters. Methods: Five kinds of phosphors which emit red light when irradiated with electron beams or ultraviolet rays in practical devices were chosen. For themore » brightness measurement, phosphor was put into transparent plastic cells or coated onto plastic sheets. The phosphors were irradiated with medical range x-rays [60–120 kV(peak), maximum dose rate of 160 mGy min{sup −1}], and the emission was measured by a luminance meter. Several characteristics, such as brightness, dose rate dependence, tube voltage dependence, and brightness stability, were investigated. Results: The luminescence of Y V O{sub 4}:Eu, (Y,Gd,Eu) BO{sub 3}, and Y{sub 2}O{sub 3}:Eu significantly deteriorated by 5%–10% when irradiated with continuous 2 Gy x-rays. The 0.5MgF{sub 2}⋅3.5MgO⋅GeO{sub 2}:Mn phosphor did not emit enough. Only the Y{sub 2}O{sub 2}S:Eu,Sm phosphor had hardly any brightness deterioration, and it had a linear relationship so that the x-ray dose rate could be determined from the brightness with sufficient accuracy. For the tube voltage dependence of the Y{sub 2}O{sub 2}S:Eu,Sm phosphor, the brightness per unit dose rate with 120 kV(peak) x-rays was 30% higher than that with 60 kV(peak) x-rays. Conclusions: Five kinds of phosphors were chosen as an x-ray scintillator for a real-time direct skin dosimeter. The Y V O{sub 4}:Eu, (Y,Gd,Eu)BO{sub 3}, and Y{sub 2}O{sub 3}:Eu phosphors had brightness deterioration caused by the x-rays. Only the Y{sub 2}O{sub 2}S:Eu,Sm phosphor had hardly any brightness deterioration, and it is a candidate for an x-ray scintillator for such a skin dosimeter.« less

  17. Translating cell-based regenerative medicines from research to successful products: challenges and solutions.

    PubMed

    Bayon, Yves; Vertès, Alain A; Ronfard, Vincent; Egloff, Matthieu; Snykers, Sarah; Salinas, Gabriella Franco; Thomas, Robert; Girling, Alan; Lilford, Richard; Clermont, Gaelle; Kemp, Paul

    2014-08-01

    The Tissue Engineering & Regenerative Medicine International Society-Europe (TERMIS-EU) Industry Committee as well as its TERMIS-Americas (AM) counterpart intend to address the specific challenges and needs facing the industry in translating academic research into commercial products. Over the last 3 years, the TERMIS-EU Industry Committee has worked with commercial bodies to deliver programs that encourage academics to liaise with industry in proactive collaborations. The TERMIS-EU 2013 Industry Symposium aimed to build on this commercial agenda by focusing on two topics: Operations Management (How to move a process into the good manufacturing practice [GMP] environment) and Clinical Translation (Moving a GMP process into robust trials). These topics were introduced by providing the synergistic business perspective of partnering between the multiple regenerative medicine stakeholders, throughout the life cycle of product development. Seven industry leaders were invited to share their experience, expertise, and strategies. Due to the complex nature of regenerative medicine products, partnering for their successful commercial development seems inevitable to overcome all obstacles by sharing experiences and expertise of all stakeholders. When ideally implemented, the "innovation quotient" of a virtual team resulting from the combination of internal and external project teams can be maximized through maximizing the three main dimensions: core competences, technology portfolio, and alliance management.

  18. Development and production of good manufacturing practice grade human embryonic stem cell lines as source material for clinical application.

    PubMed

    De Sousa, P A; Downie, J M; Tye, B J; Bruce, K; Dand, P; Dhanjal, S; Serhal, P; Harper, J; Turner, M; Bateman, M

    2016-09-01

    From 2006 to 2011, Roslin Cells Ltd derived 17 human embryonic stem cells (hESC) while developing (RCM1, RC-2 to -8, -10) and implementing (RC-9, -11 to -17) quality assured standards of operation in a facility operating in compliance with European Union (EU) directives and United Kingdom (UK) licensure for procurement, processing and storage of human cells as source material for clinical application, and targeted to comply with an EU Good Manufacturing Practice specification. Here we describe the evolution and specification of the facility, its operation and outputs, complementing hESC resource details communicated in Stem Cell Research Lab Resources. Copyright © 2016. Published by Elsevier B.V.

  19. Definition and classification of evaluation units for tertiary structure prediction in CASP12 facilitated through semi-automated metrics.

    PubMed

    Abriata, Luciano A; Kinch, Lisa N; Tamò, Giorgio E; Monastyrskyy, Bohdan; Kryshtafovych, Andriy; Dal Peraro, Matteo

    2018-03-01

    For assessment purposes, CASP targets are split into evaluation units. We herein present the official definition of CASP12 evaluation units (EUs) and their classification into difficulty categories. Each target can be evaluated as one EU (the whole target) or/and several EUs (separate structural domains or groups of structural domains). The specific scenario for a target split is determined by the domain organization of available templates, the difference in server performance on separate domains versus combination of the domains, and visual inspection. In the end, 71 targets were split into 96 EUs. Classification of the EUs into difficulty categories was done semi-automatically with the assistance of metrics provided by the Prediction Center. These metrics account for sequence and structural similarities of the EUs to potential structural templates from the Protein Data Bank, and for the baseline performance of automated server predictions. The metrics readily separate the 96 EUs into 38 EUs that should be straightforward for template-based modeling (TBM) and 39 that are expected to be hard for homology modeling and are thus left for free modeling (FM). The remaining 19 borderline evaluation units were dubbed FM/TBM, and were inspected case by case. The article also overviews structural and evolutionary features of selected targets relevant to our accompanying article presenting the assessment of FM and FM/TBM predictions, and overviews structural features of the hardest evaluation units from the FM category. We finally suggest improvements for the EU definition and classification procedures. © 2017 Wiley Periodicals, Inc.

  20. The economics of biosimilars.

    PubMed

    Blackstone, Erwin A; Joseph, P Fuhr

    2013-09-01

    The high cost of pharmaceuticals, especially biologics, has become an important issue in the battle to control healthcare costs. The Hatch-Waxman Act encourages generic competition but still provides incentives for pioneers to develop new drugs. The Biologics Price Competition and Innovation Act is intended to do the same for biologics and biosimilars. To examine information related to biosimilars to determine their potential impact on competition in the biologic market. Using information concerning the European Union (EU) and the pharmaceutical industry, this article reviews and analyzes the experience of biosimilars in the EU, as well as the obstacles and opportunities that biosimilars face in the United States. Much of the analysis is based on examining current trends in biologic drugs and the potential implications on the future of biosimilars. This article reviews the mixed success of biosimilars in the EU and the implications for the United States. Because biologics are produced from living organisms, manufacturing issues are more important than in the chemical drug market. The barriers to biosimilar entry into the marketplace are much more difficult to overcome than challenges generic manufacturers typically face and are similar to obstacles specialty injectable producers encounter. The competitive responses by pioneers are also likely to be more important. The capital costs and risk issues with biosimilars make alliances and partnering arrangements very likely. Biosimilars often enter emerging markets, where the barriers to entry are easier to overcome. Nevertheless, the United States represents the greatest opportunity for biosimilar producers, in part because it is the largest biologics market and has high prices for biologics. As the United States enters the biosimilar market, the pharmaceutical industry is likely to grow at an accelerated pace. Automatic substitution is likely to be slow to develop, because of safety and quality concerns. The beneficial impact of biosimilars is likely to take a long time to be realized and to be fraught with more difficulties than was the case for small-molecule generics. Various factors, such as safety, pricing, manufacturing, entry barriers, physician acceptance, and marketing, will make the biosimilar market develop different from the generic market. The high cost to enter the market and the size of the biologic drug market make entry attractive but risky.

  1. Similar pharmacokinetics and pharmacodynamics of rapid-acting insulin lispro products SAR342434 and US- and EU-approved Humalog in subjects with type 1 diabetes.

    PubMed

    Kapitza, Christoph; Nowotny, Irene; Lehmann, Anne; Bergmann, Karin; Rotthaeuser, Baerbel; Nosek, Leszek; Becker, Reinhard H A

    2017-05-01

    To compare the pharmacokinetics (PK) and pharmacodynamics (PD) of 3 rapid-acting insulin lispro products: SAR342434 solution, United States (US)-approved Humalog and European Union (EU)-approved Humalog. In a single-centre, randomized, double-blind, 3-treatment, 3-period, 6-sequence, crossover, euglycaemic clamp study (NCT02273258), adult male subjects with type 1 diabetes were randomized to receive 0.3 U/kg of SAR342434 solution, US-approved and EU-approved Humalog under fasted conditions. PK and PD (glucose infusion rate [GIR]) were assessed up to 12 hours. Of the 30 subjects randomized, 28 completed all 3 treatment periods. Mean concentration and GIR vs time profiles were similar for all 3 products. Exposure (INS-C max , INS-AUC last and INS-AUC) and activity (GIR max and GIR-AUC 0-12h ) of SAR342434, US-approved and EU-approved Humalog were similar in all comparisons (point estimates of treatment ratios, 0.95-1.03 for PK parameters and 1.00-1.07 for PD parameters), with 90% confidence intervals for the ratios of geometric least squares means within the pre-specified bioequivalence limit (0.80-1.25) and no significant differences in time-related parameters. Within-subject variability of exposure and activity was low across the 3 clamps, indicating high day-to-day reproducibility in clamp performance, irrespective of the individual product. Adverse events were similar for all 3 products. No safety concerns were noted in vital signs or in laboratory and electrocardiogram data. The results of this study demonstrate similarity in insulin lispro exposure profiles and PD activity of SAR342434 solution to both US- and EU-approved Humalog, and between both US- and EU-approved Humalog, supporting the use of SAR342434 solution for injection as a follow-on product. © 2016 John Wiley & Sons Ltd.

  2. Report on the Joint EU-US Workshop on Microbial Community Dynamics: Cooperation and Competition

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wall, Judy D.

    2013-07-01

    The European Commission (EC)-United States (US) Task Force on Biotechnology Research has a longstanding joint Working Group on Biotechnology for the Environment whose mission is to foster collaborations between researchers in the European Union (EU) and US in the field of environmental biotechnology. A special focus of the Working Group is to increase scientific interchange between early career scientists in the US and EU. Such interactions initiate a foundation of respect and trust needed to develop long-term collaborations. In order to realize the full potential for the application of modern technologies to obtain a sustainable biosphere, it is vital tomore » create conduits for knowledge exchange among scientists worldwide engaged in environmental microbial biotechnology research. Since its formation in 1994, the Working Group has organized many activities for early career scientists designed to promote this scientific exchange, including two week courses with hands-on research experience, intensive workshops of two or three days, and research scholar exchanges of one to six months. These interactions are focused on environmental problems that respect no international boundaries.« less

  3. Organization of nif gene cluster in Frankia sp. EuIK1 strain, a symbiont of Elaeagnus umbellata.

    PubMed

    Oh, Chang Jae; Kim, Ho Bang; Kim, Jitae; Kim, Won Jin; Lee, Hyoungseok; An, Chung Sun

    2012-01-01

    The nucleotide sequence of a 20.5-kb genomic region harboring nif genes was determined and analyzed. The fragment was obtained from Frankia sp. EuIK1 strain, an indigenous symbiont of Elaeagnus umbellata. A total of 20 ORFs including 12 nif genes were identified and subjected to comparative analysis with the genome sequences of 3 Frankia strains representing diverse host plant specificities. The nucleotide and deduced amino acid sequences showed highest levels of identity with orthologous genes from an Elaeagnus-infecting strain. The gene organization patterns around the nif gene clusters were well conserved among all 4 Frankia strains. However, characteristic features appeared in the location of the nifV gene for each Frankia strain, depending on the type of host plant. Sequence analysis was performed to determine the transcription units and suggested that there could be an independent operon starting from the nifW gene in the EuIK strain. Considering the organization patterns and their total extensions on the genome, we propose that the nif gene clusters remained stable despite genetic variations occurring in the Frankia genomes.

  4. Cellulase with high β-glucosidase activity by Penicillium oxalicum under solid state fermentation and its use in hydrolysis of cassava residue.

    PubMed

    Su, Lin-Hui; Zhao, Shuai; Jiang, Sui-Xin; Liao, Xu-Zhong; Duan, Cheng-Jie; Feng, Jia-Xun

    2017-02-01

    In this study, we investigated cellulase production by Penicillium oxalicum EU2106 under solid-state fermentation (SSF) and its hydrolysis efficiency toward NaOH-H 2 O 2 -pretreated cassava residue (NHCR) produced after bioethanol fermentation. Optimization of SSF cultivation conditions for P. oxalicum EU2106 using a Box-behnken design-based response-surface methodology resulted in maximal cellulase activity of 34.0 ± 2.8 filter-paper units/g dry substrate, exhibiting a ~ twofold increase relative to activities obtained under non-optimized conditions. Furthermore, SSF-derived cellulase converted 94.3 ± 1.5% of NHCR cellulose into glucose within 96 h. Interestingly, P. oxalicum EU2106 produced higher β-glucosidase activity under SSF conditions than that under submerged-state fermentation conditions, resulting in the elimination of cellobiose inhibition during the early stages of NHCR cellulose hydrolysis. Overall, this work provided an alternative for a potential cellulase source and a preferred option for cassava residue biotechnological application.

  5. Consequence of alternative standards for bulk tank somatic cell count of dairy herds in the United States

    USDA-ARS?s Scientific Manuscript database

    Comparison of dairy operations failing compliance with current US and European Union (EU) standards for bulk-tank somatic cell count (BTSCC) as well as BTSCC standards proposed by 3 national organizations were evaluated using 2 populations of US dairy herds: Dairy Herd Improvement Association (DHI) ...

  6. Trends in noncompliance with milk quality standards for Dairy Herd Improvement herds in the United States

    USDA-ARS?s Scientific Manuscript database

    Frequency of herd noncompliance for somatic cell count (SCC) based on current US and European Union (EU) standards as well as for standards proposed by the National Milk Producers Federation (NMPF) was examined for US Dairy Herd Improvement (DHI) herds. For current US standards, regulatory action is...

  7. 75 FR 62502 - Proposed Information Collection; Comment Request; Information for Self-Certification Under FAQ 6...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-12

    ... Request; Information for Self-Certification Under FAQ 6 of the United States--European Union Safe Harbor.... SUPPLEMENTARY INFORMATION: I. Abstract In response to the European Union Directive on Data Protection that... framework bridges the differences between the European Union (EU) and U.S. approaches to privacy protection...

  8. Identification of control agents and factors affecting pathogenicity of Phytophthora ramorum

    Treesearch

    Marianne Elliott; Simon F. Shamoun; Grace Sumampong; Delano James; Stephan C. Briere; Saad Masri; Aniko Varga

    2008-01-01

    A collection of 67 isolates of Phytophthora ramorum from the United States (U.S.), European Union (EU), and Canada was screened using differences in phenotypic traits (pathogenicity, growth rate at several temperatures, and sensitivity/resistance to metalaxyl, dimethomorph, and streptomycin) and for presence of cytoplasmic elements (dsRNA and...

  9. Mobile Learning and Teacher Education: Researching MLEARN Pilot Development

    ERIC Educational Resources Information Center

    Passey, Don; Zozimo, Joana

    2015-01-01

    MLEARN, a European Union (EU)-funded project, is exploring and promoting teacher development of mobile learning practices in four member states--the Netherlands, the United Kingdom (UK) (England), Greece and Italy. This paper details the ways research findings have both fed into and been elicited from this pilot, supporting development and…

  10. Developing ECEC Services in Regionalised Administrations: Scotland's Post-Devolution Experience

    ERIC Educational Resources Information Center

    Cohen, Bronwen

    2013-01-01

    Devolution within the United Kingdom (UK) forms part of increased regionalisation in the European Union (EU). The post-devolution history of early childhood education and care (ECEC) in Scotland illustrates problems arising from split responsibilities and nation-state policies that fail to take adequate account of devolved administrations. UK-led…

  11. Developing, Approving and Maintaining Qualifications: Selected International Approaches. Research Report

    ERIC Educational Resources Information Center

    Misko, Josie

    2015-01-01

    There are lessons for Australia in the key approaches to the development, approval, maintenance and quality assurance of qualifications adopted in countries overseas. This research takes into account a range of approaches used in selected European Union (EU) member states (Germany, Finland and Sweden), the United Kingdom (England, Northern Ireland…

  12. International perspective on nanotechnology papers, patents, and NSF awards (2000-2016)

    NASA Astrophysics Data System (ADS)

    Zhu, Hongyi; Jiang, Shan; Chen, Hsinchun; Roco, Mihail C.

    2017-11-01

    This paper presents the development of nanotechnology between 2000 and 2016 as reflected in the Web of Science papers, United States Patent and Trademark Office (USPTO), World International Property Organization (WIPO) patents, and National Science Foundation (NSF) awards, with a special reference to the United States (US), European Union (EU27), P.R. China, Japan, and South Korea. The field of nanotechnology is branching out into novel scientific and technology platforms, and it is increasingly difficult to separate foundational nanoscale components from divergent application areas. The average global growth rate has been sustained at about 15% for both papers and patents in the selected interval. The growth rates among regions are non-uniform. P.R. China and South Korea have increased faster in both the numbers and quality of their scientific publications, and currently P.R. China has the largest volume of nanotechnology publications and South Korea the most publications per capita in the field of nanotechnology. The US, EU27, and Japan are maintaining leadership in the upstream, better cited, conceptual components of nanotechnology research and development.

  13. Structural, morphological and optical investigations on electron-beam irradiated PbF2-TeO2-B2O3-Eu2O3 glasses

    NASA Astrophysics Data System (ADS)

    Wagh, Akshatha; Petwal, Vikash; Dwivedi, Jishnu; Upadhyaya, V.; Raviprakash, Y.; Kamath, Sudha D.

    2016-09-01

    Combined structural, optical and morphological studies were carried out on Eu2O3 doped PbF2-TeO2-B2O3 glass samples, before and after being subjected to electron beam of energy 7.5 MeV. XRD confirmed the amorphous nature of the glasses even after 150 kGy electron beam irradiation. Densities of the irradiated samples showed slightly greater values when compared to their respective values before irradiation, which proved the increase in the compaction of the network. The intensities of the three prominent bands; B-O-B linkages, BO4 units and BO3 units of FT-IR spectra, of the titled glasses, showed slight decrease after electron beam irradiation. The decrement in the values of energy band gap and shift in cut-off wavelength towards red edge, proved the formation of color centers in the glass network after irradiation. The change in Hunter L values, through color measurement was a proof for the Farbe/color/absorption centers created in the glass sites after irradiation.

  14. Auxiliary engine digital interface unit (DIU)

    NASA Technical Reports Server (NTRS)

    1972-01-01

    This auxiliary propulsion engine digital unit controls both the valving of the fuel and oxidizer to the engine combustion chamber and the ignition spark required for timely and efficient engine burns. In addition to this basic function, the unit is designed to manage it's own redundancy such that it is still operational after two hard circuit failures. It communicates to the data bus system several selected information points relating to the operational status of the electronics as well as the engine fuel and burning processes.

  15. Endotoxin, coliform, and dust levels in various types of rodent bedding.

    PubMed

    Whiteside, Tanya E; Thigpen, Julius E; Kissling, Grace E; Grant, Mary G; Forsythe, Diane

    2010-03-01

    Endotoxins in grain dust, household dust, and animal bedding may induce respiratory symptoms in rodents and humans. We assayed the endotoxin, coliform, and dust levels in 20 types of rodent bedding. Endotoxin concentrations were measured by using a commercial test kit, coliform counts were determined by using conventional microbiologic procedures, and dust content was evaluated by using a rotating-tapping shaker. Paper bedding types contained significantly less endotoxin than did other bedding types; the highest levels of endotoxin were detected in hardwood and corncob beddings. The range of endotoxin content for each bedding type was: corncob bedding, 1913 to 4504 endotoxin units per gram (EU/g); hardwood bedding, 3121 to 5401 EU/g; corncob-paper mixed bedding, 1586 to 2416 EU/g; and paper bedding, less than 5 to 105 EU/g. Coliform counts varied from less than 10 to 7591 cfu/g in corncob beddings, 90 to 4010 cfu/g in corncob-paper mixed beddings, less than 10 to 137 cfu/g in hardwood beddings, and less than 10 cfu/g in paper beddings. Average dust content was less than 0.15% in all commercial bedding types. We conclude that paper bedding is the optimal bedding type for conducting LPS inhalation studies and that rodent bedding containing high levels of endotoxin may alter the results of respiratory and immunologic studies in rodents.

  16. Visible and NIR photoluminescence properties of a series of novel lanthanide-organic coordination polymers based on hydroxyquinoline-carboxylate ligands.

    PubMed

    Gai, Yan-Li; Xiong, Ke-Cai; Chen, Lian; Bu, Yang; Li, Xing-Jun; Jiang, Fei-Long; Hong, Mao-Chun

    2012-12-17

    A series of novel two-dimensional (2D) lanthanide coordination polymers with 4-hydroxyquinoline-2-carboxylate (H(2)hqc) ligands, [Ln(Hhqc)(3)(H(2)O)](n)·3nH(2)O (Ln = Eu (1), Tb (2), Sm (3), Nd (4), and Gd (5)) and [Ln(Hhqc)(ox)(H(2)O)(2)](n) (Ln = Eu (6), Tb (7), Sm (8), Tm (9), Dy (10), Nd (11), Yb (12), and Gd (13); H(2)ox = oxalic acid), have been synthesized under hydrothermal conditions. Complexes 1-5 are isomorphous, which can be described as a two-dimensional (2D) hxl/Shubnikov network based on Ln(2)(CO(2))(4) paddle-wheel units, and the isomorphous complexes 6-13 feature a 2D decker layer architecture constructed by Ln-ox infinite chains cross-linked alternatively by bridging Hhqc(-) ligands. The room-temperature photoluminescence spectra of complexes Eu(III) (1 and 6), Tb(III) (2 and 7), and Sm(III) (3 and 8) exhibit strong characteristic emissions in the visible region, whereas Nd(III) (4 and 11) and Yb(III) (12) complexes display NIR luminescence upon irradiation at the ligand band. Moreover, the triplet state of H(2)hqc matches well with the emission level of Eu(III), Tb(III), and Sm(III) ions, which allows the preparation of new optical materials with enhanced luminescence properties.

  17. Equation of state for Eu-doped SrSi2O2N2

    NASA Astrophysics Data System (ADS)

    Ermakova, Olga; Paszkowicz, Wojciech; Kaminska, Agata; Barzowska, Justyna; Szczodrowski, Karol; Grinberg, Marek; Minikayev, Roman; Nowakowska, Małgorzata; Carlson, Stefan; Li, Guogang; Liu, Ru-Shi; Suchocki, Andrzej

    2014-07-01

    α-SrSi2O2N2 is one of the recently studied oxonitridosilicates applicable in optoelectronics, in particular in white LEDs. Its elastic properties remain unknown. A survey of literature shows that, up to now, nine oxonitridosilicate materials have been identified. For most of these compounds, doped with rare earths and manganese, a luminescence has been reported at a wavelength characteristic for the given material; all together cover a broad spectral range. The present study focuses on the elastic properties of one of these oxonitridosilicates, the Eu-doped triclinic α-SrSi2O2N2. High-pressure powder diffraction experiments are used in order to experimentally determine, for the first time, the equation of state of this compound. The in situ experiment was performed for pressures ranging up to 9.65 GPa, for Eu-doped α-SrSi2O2N2 sample mounted in a diamond anvil cell ascertaining the hydrostatic compression conditions. The obtained experimental variation of volume of the triclinic unit cell of α-SrSi2O2N2:Eu with rising pressure served for determination of the Birch-Murnaghan equation of state. The determined above quoted bulk modulus is 103(5) GPa, its first derivative is 4.5(1.1). The above quoted bulk modulus value is found to be comparable to that of earlier reported oxynitrides of different composition.

  18. Endotoxin, Coliform, and Dust Levels in Various Types of Rodent Bedding

    PubMed Central

    Whiteside, Tanya E; Thigpen, Julius E; Kissling, Grace E; Grant, Mary G; Forsythe, Diane B

    2010-01-01

    Endotoxins in grain dust, household dust, and animal bedding may induce respiratory symptoms in rodents and humans. We assayed the endotoxin, coliform, and dust levels in 20 types of rodent bedding. Endotoxin concentrations were measured by using a commercial test kit, coliform counts were determined by using conventional microbiologic procedures, and dust content was evaluated by using a rotating–tapping shaker. Paper bedding types contained significantly less endotoxin than did other bedding types; the highest levels of endotoxin were detected in hardwood and corncob beddings. The range of endotoxin content for each bedding type was: corncob bedding, 1913 to 4504 endotoxin units per gram (EU/g); hardwood bedding, 3121 to 5401 EU/g; corncob–paper mixed bedding, 1586 to 2416 EU/g; and paper bedding, less than 5 to 105 EU/g. Coliform counts varied from less than 10 to 7591 cfu/g in corncob beddings, 90 to 4010 cfu/g in corncob–paper mixed beddings, less than 10 to 137 cfu/g in hardwood beddings, and less than 10 cfu/g in paper beddings. Average dust content was less than 0.15% in all commercial bedding types. We conclude that paper bedding is the optimal bedding type for conducting LPS inhalation studies and that rodent bedding containing high levels of endotoxin may alter the results of respiratory and immunologic studies in rodents. PMID:20353693

  19. Electrostatic dust collectors compared to inhalable samplers for measuring endotoxin concentrations in farm homes

    PubMed Central

    Kilburg-Basnyat, Brita; Peters, Thomas M.; Perry, Sarah S.; Thorne, Peter S.

    2016-01-01

    Paired electrostatic dust collectors (EDCs) and daily, inhalable button samplers (BS) were used concurrently to sample endotoxin in 10 farm homes during 7-day periods in summer and winter. Winter sampling included an optical particle counter (OPC) to measure PM2.5 and PM2.5-10. Electrostatic dust collectors and BS filters were analyzed for endotoxin using the kinetic chromogenic Limulus amebocyte lysate assay. Optical particle counter particulate matter (PM) data were divided into two PM categories. In summer, geometric mean (geometric standard deviation) endotoxin concentrations were 0.82 EU/m3 (2.7) measured with the BS and 737 EU/m2 (1.9) measured with the EDC. Winter values were 0.52 EU/m3 (3.1) for BS and 538 EU/m2 (3.0) for EDCs. Seven day endotoxin values of EDCs were highly correlated with the 7-day BS sampling averages (r=0.70; p<0.001). Analysis of variance indicated a 2.4-fold increase in EDC endotoxin concentrations for each unit increase of the ratio of PM2.5 to PM2.5-10. There was also a significant correlation between BS and EDCs endotoxin concentrations for winter (r=0.67; p<0.05) and summer(r=0.75; p<0.05). Thus, EDCs sample comparable endotoxin concentrations to BS, making EDCs a feasible, easy to use alternative to BS for endotoxin sampling. PMID:26296624

  20. Analytical and functional similarity of Amgen biosimilar ABP 215 to bevacizumab.

    PubMed

    Seo, Neungseon; Polozova, Alla; Zhang, Mingxuan; Yates, Zachary; Cao, Shawn; Li, Huimin; Kuhns, Scott; Maher, Gwendolyn; McBride, Helen J; Liu, Jennifer

    ABP 215 is a biosimilar product to bevacizumab. Bevacizumab acts by binding to vascular endothelial growth factor A, inhibiting endothelial cell proliferation and new blood vessel formation, thereby leading to tumor vasculature normalization. The ABP 215 analytical similarity assessment was designed to assess the structural and functional similarity of ABP 215 and bevacizumab sourced from both the United States (US) and the European Union (EU). Similarity assessment was also made between the US- and EU-sourced bevacizumab to assess the similarity between the two products. The physicochemical properties and structural similarity of ABP 215 and bevacizumab were characterized using sensitive state-of-the-art analytical techniques capable of detecting small differences in product attributes. ABP 215 has the same amino acid sequence and exhibits similar post-translational modification profiles compared to bevacizumab. The functional similarity assessment employed orthogonal assays designed to interrogate all expected biological activities, including those known to affect the mechanisms of action for ABP 215 and bevacizumab. More than 20 batches of bevacizumab (US) and bevacizumab (EU), and 13 batches of ABP 215 representing unique drug substance lots were assessed for similarity. The large dataset allows meaningful comparisons and garners confidence in the overall conclusion for the analytical similarity assessment of ABP 215 to both US- and EU-sourced bevacizumab. The structural and purity attributes, and biological properties of ABP 215 are demonstrated to be highly similar to those of bevacizumab.

  1. Project Adopsys as an example of international collaboration in the field of photonics

    NASA Astrophysics Data System (ADS)

    Zoric, Nenad; Livshits, Irina; Urbach, Paul

    2015-01-01

    Tendencies of international cooperation in engineering education became very visible during recent years. We demonstrate this statement on one currently running EU project ADOPSYS in the field of optical design, which is an important part of engineering education in photonics. This example shows the importance of the input from different countries and organizations - both from industry and academia. Seven universities and eight optical companies are involved in the project ADOPSYS. Sharing experience of Academia education activity we provide new international type of education "free-of borders". We are going to discuss the key enable technology - PHOTONICS, which is widely used in modern society. Engineering science became very international. For communicating between people from different countries the English language is now used almost exclusively. For a fruitful collaboration between people from different nations, in multi-national projects, tolerance and respect are required between people of different political, cultural, educational backgrounds.

  2. Design and operation experience of 230 MWe CFB boilers at Turow power plant in Poland

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nowak, W.; Bis, Z.; Laskawiec, J.

    The Power Station Turow is located in Bogatynia, Poland, and has operated 10 pulverized coal units each of 200 MW. The plant provided 2000 MW at the lowest cost per kWh in Poland. The Turow units have approached and in some cases already gone beyond their 25--30 year's design life. To meet Poland's new environmental standards, which are now compatible with the EU, Turow decided to replace and upgrade six units (No. 1 to 6) from 200 MW to 230 MW units and remove one unit No. 7. Units No. 8, 9 and 10 were equipped with dry sorbent desulfurizationmore » technology. Units No. 1 and 2 have been replaced with new clean coal circulating fluidized bed technology. The Power Station Turow with six CFB units is to be the largest in the world power station based on fluidized bed technology.« less

  3. STATION BUILDING. United Engineering Company Ltd., Alameda Shipyard, Ship Repair ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    STATION BUILDING. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities. Plan, elevations, sections, details. Austin Willmott Earl, Consulting Engineer, 233 Sansome Street, San Francisco, California. Drawing no. 504. Various scales. January 20, 1945, no revisions. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76, amendments 4 & 5. blueprint - United Engineering Company Shipyard, Electrical Services & Switching Station, 2900 Main Street, Alameda, Alameda County, CA

  4. An audit improves the quality of water within the dental unit water lines of three separate facilities of a United Kingdom NHS Trust.

    PubMed

    Chate, R A C

    2006-11-11

    To improve the quality of water emanating from dental unit waterlines (DUWLs). A prospective clinical audit. Three geographically separate district dental facilities of a United Kingdom NHS Trust, involving two community clinics and one hospital orthodontic department, which were evaluated between 2002 and 2004. Samples of water discharged from the DUWLs were collected prior to the start and midway through a morning session. These were tested microbiologically at a United Kingdom Accreditation Service testing laboratory within six hours of sampling. One of the clinics followed the contemporaneous BDA advice of flushing water through its DUWLs while the other two clinics used separate intermittent disinfection purging regimes instead. One of them used a two stage protocol of Ethylene Diamine Tetra-Acetic acid followed by hydrogen peroxide, while the other used Bio 2000 as a single agent, which was subsequently superseded by the continuous use of super-oxidised water (Sterilox). To assess whether the samples either met the American Dental Association's guideline on the quality of DUWL water, or the more stringent European Union standards for potable (drinking) water. The two units which used a disinfection regime both complied with the ADA guideline and the EU potable water standard. However, the unit which only flushed through its DUWLs without using a disinfectant failed to comply with either of them. After all three dental facilities subsequently standardised their DUWL disinfection regimes by using Bio 2000, the colony counts from all of the water samples thereafter remained well below the EU recommended level. The unit which progressed to using Sterilox as a continuous disinfectant achieved and maintained zero readings from its water samples. Clinical audit can result in the improvement of the quality of water that is discharged through DUWLs, thereby minimising both the risk of cross infection to vulnerable patients, as well as to dental staff chronically exposed to contaminated aerosols.

  5. An Assessment of Research-Doctorate Programs in the United States: Engineering.

    ERIC Educational Resources Information Center

    Jones, Lyle V., Ed.; And Others

    The quality of doctoral-level chemical engineering (N=79), civil engineering (N=74), electrical engineering (N=91), and mechanical engineering (N=82) programs at United States universities was assessed, using 16 measures. These measures focused on variables related to: (1) program size; (2) characteristics of graduates; (3) reputational factors…

  6. Characteristics, Similarities, and Differences among Four-Year Cooperative Engineering Programs in the United States

    ERIC Educational Resources Information Center

    Egbert, Robert I.; Stone, Lorene H.; Adams, David L.

    2011-01-01

    Four-year cooperative engineering programs are becoming more common in the United States. Cooperative engineering programs typically involve a "parent" institution with an established engineering program and one or more "satellite" institutions which typically have few or no engineering programs and are located in an area where…

  7. 14 CFR 33.96 - Engine tests in auxiliary power unit (APU) mode.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Block Tests; Turbine Aircraft Engines § 33.96 Engine tests in auxiliary power unit (APU) mode. If the engine is designed with a propeller brake which...) Ground locking: A total of 45 hours with the propeller brake engaged in a manner which clearly...

  8. 14 CFR 33.96 - Engine tests in auxiliary power unit (APU) mode.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Block Tests; Turbine Aircraft Engines § 33.96 Engine tests in auxiliary power unit (APU) mode. If the engine is designed with a propeller brake which...) Ground locking: A total of 45 hours with the propeller brake engaged in a manner which clearly...

  9. 14 CFR 33.96 - Engine tests in auxiliary power unit (APU) mode.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Block Tests; Turbine Aircraft Engines § 33.96 Engine tests in auxiliary power unit (APU) mode. If the engine is designed with a propeller brake which...) Ground locking: A total of 45 hours with the propeller brake engaged in a manner which clearly...

  10. 14 CFR 33.96 - Engine tests in auxiliary power unit (APU) mode.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Block Tests; Turbine Aircraft Engines § 33.96 Engine tests in auxiliary power unit (APU) mode. If the engine is designed with a propeller brake which...) Ground locking: A total of 45 hours with the propeller brake engaged in a manner which clearly...

  11. 14 CFR 33.96 - Engine tests in auxiliary power unit (APU) mode.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Block Tests; Turbine Aircraft Engines § 33.96 Engine tests in auxiliary power unit (APU) mode. If the engine is designed with a propeller brake which...) Ground locking: A total of 45 hours with the propeller brake engaged in a manner which clearly...

  12. Measurements of a Separating Turbulent Boundary Layer.

    DTIC Science & Technology

    1980-04-01

    due to an adverse I pressure gradient is an important factor in the design of many devices such as jet engines, rocket nozzles, airfoils and helicopter...blades, and the design of fluidic logic systems. Until the last five years little quantitative experi- mental information was available on the flow...i| I M6 FIGURE 60 (A). e/U-61 AT THEMAxIMUM SEARING STRESS LOCATION: & , EPERIMENTAL DATA.A, CORRELATION USING EON. (39) A SOLID LINE StoS VALUE AT

  13. Ocean gliders as key component within the AORAC-SA

    NASA Astrophysics Data System (ADS)

    Barrera, C.; Hernandez Brito, J.; Castro, A.; Rueda, M. J.; Llinas, O.

    2016-02-01

    The Atlantic Ocean Research Alliance Coordination and Support Action (AORAC-SA) is designed to provide scientific, technical and logistical support to the EU in developing and implementing transAtlantic Marine Research Cooperation between the European Union, the United States of America and Canada. The Coordination and Support Action (CSA) is carried out within the framework of the Atlantic Ocean Research Alliance (AORA) as outlined in the Galway Statement on Atlantic Ocean Cooperation (May 2013). The CSA will be responsible for the organization of expert and stakeholder meetings, workshops and conferences required by the AORA and related to identified research priorities support actions and other initiatives as they arise, taking into account related Horizon 2020 supported transAtlantic projects and on-going national and EU collaborative projects. The AORAC-SA support and governance structure comprises a Secretariat and Management Team, guided by a high-level Operational Board, representative of the major European Marine Research Programming and Funding Organizations as well as those of the USA and Canada. As example of this research cooperative framework, ocean gliders have become nowadays a common, innovative and sustainable ocean-observations tool for the Atlantic basin, linking research groups, govermental institutions and private companies from both sides in terms of technical developments, transatlantic missions in partnership, training forums, etc. aiming to develop common practices and protocols for a better ocean resources management and understanding. Within this context, the Oceanic Platform of the Canary Islands (PLOCAN), as AORAC-SA partner, is working on specific actions like ocean glider observations programs (endurance line) by AtlantOS project (www.atlantos-h2020.eu), related new technical developments by NeXOS FP-7 project (www.nexosproject.eu) and a yearly International Glider School forum hosting (www.gliderschool.eu).

  14. Composition dependent structural and optical properties of PbF₂-TeO₂-B₂O₃-Eu₂O₃ glasses.

    PubMed

    Wagh, Akshatha; Raviprakash, Y; Upadhyaya, Vyasa; Kamath, Sudha D

    2015-12-05

    Boric oxide based quaternary glasses in the system PbF2-TeO2-B2O3-Eu2O3 have been prepared by melt quenching technique. Density, molar volume, FTIR, UV-Vis techniques were used to probe the structural modifications with incorporation of europium ions in the glass network. An increase in glass density & decrease in molar volume (Vm) values proved the structural changes occurring in coordination of boron atom [conversion of BO3 units to BO4]. This resulted in the increase of the compaction of the prepared glasses with increase in Eu2O3 contents. The amorphous natures of the samples were ascertained by XRD and metallization criterion (M) studies. XPS study showed the values of core-level binding energy [O1s, Eu3d, Eu4d, Te3d, Te4d, Pd4f, Pb5d, O1s, and F1s] of (PbF2-TeO2-B2O3-Eu2O3) the glass matrix. The frequency and temperature dependence of dielectric properties of present glasses were investigated in the frequency range of 1 Hz-10 MHz and temperature range of 313-773K. The study of dielectric measurements proved good insulating and thermal stability of the prepared glasses. At room temperature, dielectric loss [tanδ] values were negligibly small for prepared glasses and increased with increase in temperature. FTIR spectroscopy results were in good agreement with optical band energy gap, density, molar volume and hardness values revealing network modifications caused by europium ions in the glass structure. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. Biosimilars: A consideration of the regulations in the United States and European union.

    PubMed

    Daller, Justin

    2016-04-01

    Biosimilars are defined as biological products that are highly similar to a reference product, notwithstanding minor differences in clinically inactive components. Biosimilars show no clinically meaningful differences in safety, purity, and potency of the product in comparison to the reference product. With the ever looming patent expiry of some major high cost biologics, biosimilar production is becoming ever more lucrative to companies. Europe (EU) set the precedent, followed by the United States (US) in early 2012, for the approval process for biosimilars. Therefore, the purpose of this paper is to explore the nature of the regulatory processes in the US and EU and to determine the requirements of each in the approval process of a biosimilar. The current Food and Drug Administration (FDA) and European Medicines Agency's (EMA) guidance documents for biosimilars were reviewed revealing a need for further clarifications, as well as specifically addressing Celltrion's and Sandoz's application for approval for the biosimilars infliximab and filgrastim, respectively. Currently, the FDA and EMA focus on comparability in terms of the clinical, pharmacokinetic (PK)/pharmacodynamic (PD), preclinical, biological activity, and physiochemical characterization results, as well as requiring a robust and consistent manufacturing process. Both the EU and US have prepared guidance documents for biosimilars that will result in biotherapeutics that are as safe and efficacious as the innovator product but the necessity exists to globally harmonize international nonproprietary naming nomenclature and clarify how the concept of pharmacovigilance, extrapolation, and interchangeability will be handled and regulated in the future. Copyright © 2015 Elsevier Inc. All rights reserved.

  16. A quantitative release assessment for the noncommercial movement of companion animals: risk of rabies reintroduction to the United kingdom.

    PubMed

    Goddard, A D; Donaldson, N M; Horton, D L; Kosmider, R; Kelly, L A; Sayers, A R; Breed, A C; Freuling, C M; Müller, T; Shaw, S E; Hallgren, G; Fooks, A R; Snary, E L

    2012-10-01

    In 2004, the European Union (EU) implemented a pet movement policy (referred to here as the EUPMP) under EU regulation 998/2003. The United Kingdom (UK) was granted a temporary derogation from the policy until December 2011 and instead has in place its own Pet Movement Policy (Pet Travel Scheme (PETS)). A quantitative risk assessment (QRA) was developed to estimate the risk of rabies introduction to the UK under both schemes to quantify any change in the risk of rabies introduction should the UK harmonize with the EU policy. Assuming 100 % compliance with the regulations, moving to the EUPMP was predicted to increase the annual risk of rabies introduction to the UK by approximately 60-fold, from 7.79 × 10(-5) (5.90 × 10(-5), 1.06 × 10(-4)) under the current scheme to 4.79 × 10(-3) (4.05 × 10(-3), 5.65 × 10(-3)) under the EUPMP. This corresponds to a decrease from 13,272 (9,408, 16,940) to 211 (177, 247) years between rabies introductions. The risks associated with both the schemes were predicted to increase when less than 100 % compliance was assumed, with the current scheme of PETS and quarantine being shown to be particularly sensitive to noncompliance. The results of this risk assessment, along with other evidence, formed a scientific evidence base to inform policy decision with respect to companion animal movement. © 2012 Crown Copyright. This article is published with the permission of the Controller of the HMSO and the Queen's Printer for Scotland.

  17. Development and Analytical Validation of an Immunoassay for Quantifying Serum Anti-Pertussis Toxin Antibodies Resulting from Bordetella pertussis Infection ▿

    PubMed Central

    Menzies, Sandra L.; Kadwad, Vijay; Pawloski, Lucia C.; Lin, Tsai-Lien; Baughman, Andrew L.; Martin, Monte; Tondella, Maria Lucia C.; Meade, Bruce D.

    2009-01-01

    Adequately sensitive and specific methods to diagnose pertussis in adolescents and adults are not widely available. Currently, no Food and Drug Administration-approved diagnostic assays are available for the serodiagnosis of Bordetella pertussis. Since concentrations of B. pertussis-specific antibodies tend to be high during the later phases of disease, a simple, rapid, easily transferable serodiagnostic test was developed. This article describes test development, initial evaluation of a prototype kit enzyme-linked immunosorbent assay (ELISA) in an interlaboratory collaborative study, and analytical validation. The data presented here demonstrate that the kit met all prespecified criteria for precision, linearity, and accuracy for samples with anti-pertussis toxin (PT) immunoglobulin G (IgG) antibody concentrations in the range of 50 to 150 ELISA units (EU)/ml, the range believed to be most relevant for serodiagnosis. The assay met the precision and linearity criteria for a wider range, namely, from 50 to 200 EU/ml; however, the accuracy criterion was not met at 200 EU/ml. When the newly adopted World Health Organization International Standard for pertussis antiserum (human) reference reagent was used to evaluate accuracy, the accuracy criteria were met from 50 to 200 international units/ml. In conclusion, the IgG anti-PT ELISA met all assay validation parameters within the range considered most relevant for serodiagnosis. This ELISA was developed and analytically validated as a user-friendly kit that can be used in both qualitative and quantitative formats. The technology for producing the kit is transferable to public health laboratories. PMID:19864485

  18. Design description of a microprocessor based Engine Monitoring and Control unit (EMAC) for small turboshaft

    NASA Technical Reports Server (NTRS)

    Baez, A. N.

    1985-01-01

    Research programs have demonstrated that digital electronic controls are more suitable for advanced aircraft/rotorcraft turbine engine systems than hydromechanical controls. Commercially available microprocessors are believed to have the speed and computational capability required for implementing advanced digital control algorithms. Thus, it is desirable to demonstrate that off-the-shelf microprocessors are indeed capable of performing real time control of advanced gas turbine engines. The engine monitoring and control (EMAC) unit was designed and fabricated specifically to meet the requirements of an advanced gas turbine engine control system. The EMAC unit is fully operational in the Army/NASA small turboshaft engine digital research program.

  19. 76 FR 30987 - Termination of Action and Further Monitoring in Connection With the EC-Beef Hormones Dispute

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-27

    ... Connection With the EC-Beef Hormones Dispute AGENCY: Office of the United States Trade Representative. ACTION... Hormones dispute. In January 2009, the Trade Representative announced a determination to modify the list of...) in the EC-Beef Hormones dispute. The MOU provides for the EU to make phased increases in market...

  20. 75 FR 9431 - Small and Medium-Sized Enterprises: U.S. and EU Export Activities, and Barriers and Opportunities...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-02

    ... and Medium-Sized Enterprises: Characteristics and Performance AGENCY: United States International... for February 9-10, 2010. The February 9-10 hearing was cancelled when Federal Government activity was... procedures relating to hearings in these investigations in St. Louis, MO, on March 10, 2010, and Portland, OR...

  1. The Effects of International Mobility on European Researchers: Comparing Intra-EU and U.S. Mobility

    ERIC Educational Resources Information Center

    Veugelers, Reinhilde; Van Bouwel, Linda

    2015-01-01

    Using econometric analysis on survey data from European-born and European-educated researchers who are internationally mobile after their PhD within Europe or to the United States, we find significant positive effects from international mobility on scientific productivity, as well as several other positive career development effects. European…

  2. Internationalisation and Changing Skill Needs in European Small Firms: The Services Sector. CEDEFOP Reference Series.

    ERIC Educational Resources Information Center

    Hassid, Joseph

    A study explored questions on changing skill requirements of small firms in the services sector that are internationalizing their activities. These seven European Union (EU) member states were involved: Greece, Spain, Italy, Ireland, Austria, the Netherlands, and the United Kingdom. The services sector accounted for a significant part of the EU…

  3. 23. BUILDING NO. 22L, SHEET NO. 3. United Engineering Company ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    23. BUILDING NO. 22L, SHEET NO. 3. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities. Plans, section, & detail. Alben Froberg, Architect, 3454 Harlan Street, Oakland, California. Sheet no. 3. Plan no. 10,525. Various scales. March 1, 1943, last revised 3/15/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Engineering Building, 2900 Main Street, Alameda, Alameda County, CA

  4. 22. BUILDING NO. 22L, SHEET NO. 2. United Engineering Company ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. BUILDING NO. 22L, SHEET NO. 2. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities. Plans, section, & detail. Alben Froberg, Architect, 3454 Harlan Street, Oakland, California. Sheet no. 2. Plan no. 10,525. Various scales. March 1, 1942, last revised 3/15/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Engineering Building, 2900 Main Street, Alameda, Alameda County, CA

  5. United Stirling's Solar Engine Development: the Background for the Vanguard Engine

    NASA Technical Reports Server (NTRS)

    Holgersson, S.

    1984-01-01

    The development and testing resulting in the Vanguard engine and some of the characteristics of the Stirling engine based power conversion unit are described. The major part of the solar engine development is concentrated to the three different areas, the receiver, the lubrication system and the control system. Five engines are on test within the solar project. The function of the components are validated in actual solar tests.

  6. Enhancing Tissue Engineering and Regenerative Medicine Product Commercialization: The Role of Science in Regulatory Decision-Making for the TE/RM Product Development.

    PubMed

    Bertram, Timothy A; Johnson, Peter C; Tawil, Bill J; Van Dyke, Mark; Hellman, Kiki B

    2015-10-01

    TERMIS-AM Industry Committee (TERMIS-AM/IC), in collaboration with the TERMIS-Europe (EU)/IC, conducted a symposium involving the European Medicines Agency and the U.S. Food and Drug Administration (FDA) toward building an understanding of the rational basis for regulatory decision-making and providing a framework for decisions made during the evaluation of safety and efficacy of TE/RM technologies. This symposium was held in August 2012 during the TERMIS-WC in Vienna, Austria. Emerging from this international initiative by the European Union and the United States, representatives from the respective agencies demonstrated that there are ongoing interagency efforts for developing common national practices toward harmonization of regulatory requirements for the TE/RM products. To extend a broad-based understanding of the role of science in regulatory decision-making, TERMIS-AM/IC, in cooperation with the FDA, organized a symposium at the 2014 TERMIS-AM Annual Meeting, which was held in Washington, DC. This event provided insights from leaders in the FDA and TERMIS on the current status of regulatory approaches for the approved TE/RM products, the use of science in making regulatory decisions, and TE/RM technologies that are in the development pipeline to address unmet medical needs. A far-ranging discussion with FDA representatives, industrialists, physicians, regenerative medicine biologists, and tissue engineers considered the gaps in today's scientific and regulatory understanding of TE/RM technologies. The identified gaps represent significant opportunities to advance TE/RM technologies toward commercialization.

  7. GATE HOUSE FOR UNITED ENGINEERING CO., Alameda, California. Four elevations ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    GATE HOUSE FOR UNITED ENGINEERING CO., Alameda, California. Four elevations and three sections. Alben Froberg, Architect, Oakland, California. Sheet no. 1. Scale 1/4 inch to the foot, elevations. Scale ~ inch to the foot, sections. July 31, 1941. pencil on tracing paper - United Engineering Company Shipyard, Gate House, 2900 Main Street, Alameda, Alameda County, CA

  8. Development of a Self-Instructional Course in Engineering Statics. Final Report.

    ERIC Educational Resources Information Center

    Alexander, Daniel E.

    Reported is the development of a self-instructional course in engineering statics designed for engineering students that has been implemented in several institutions. There are 15 unit modules in the course divided into three different levels. Each unit begins with a description of general objectives. The unit is then divided into several subunits…

  9. Elimination of trachoma as a public health problem in Ghana: Providing evidence through a pre-validation survey.

    PubMed

    Debrah, Oscar; Mensah, Ernest O; Senyonjo, Laura; de Souza, Dziedzom K; Hervie, Tei E; Agyemang, David; Bakajika, Didier; Marfo, Benjamin; Ahorsu, Felix; Wanye, Seth; Bailey, Robin; Koroma, Joseph B; Aboe, Agatha; Biritwum, Nana-Kwadwo

    2017-12-01

    In order to achieve elimination of trachoma, a country needs to demonstrate that the elimination prevalence thresholds have been achieved and then sustained for at least a two-year period. Ghana achieved the thresholds in 2008, and since 2011 has been implementing its trachoma surveillance strategy, which includes community and school screening for signs of follicular trachoma and trichiasis, in trachoma-endemic districts. In 2015-2016, the country conducted a district level population-based survey to validate elimination of trachoma as a public health problem. As per WHO recommendations, a cross-sectional survey, employing a two-stage cluster random sampling methodology, was used across 18 previously trachoma endemic districts (evaluation units (EUs) in the Upper West and Northern Regions of Ghana. In each EU 24 villages were selected based on probability proportional to estimated size. A minimum of 40 households were targeted per village and all eligible residents were examined for clinical signs of trachoma, using the WHO simplified grading system. The number of trichiasis cases unknown to the health system was determined. Household environmental risk factors for trachoma were also assessed. Data from 45,660 individuals were examined from 11,099 households across 18 EUs, with 27,398 (60.0%) children aged 1-9 years and 16,610 (36.4%) individuals 15 years and above All EUs had shown to have maintained the WHO elimination threshold for Trachomatous inflammation-Follicular (TF) (<5.0% prevalence) in children aged 1-9 years old. The EU TF prevalence in children aged 1-9 years old ranged from between 0.09% to 1.20%. Only one EU (Yendi 0.36%; 95% CI: 0.0-1.01) failed to meet the WHO TT elimination threshold (< 0.2% prevalence in adults aged 15 and above). The EU prevalence of trichiasis (TT) unknown to the health system in adults aged ≥15 years, ranged from 0.00% to 0.36%. In this EU, the estimated TT backlog is 417 All TT patients identified in the study, as well as through on-going surveillance efforts will require further management. A total of 75.9% (95% CI 72.1-79.3, EU range 29.1-92.6) of households defecated in the open but many households had access to an improved water source 75.9% (95%CI: 71.5-79.8, EU range 47.4-90.1%), with 45.5% (95% CI 41.5-49.7%, EU range 28.4-61.8%) making a round trip of water collection < 30 minutes. The findings from this survey indicate elimination thresholds have been maintained in Ghana in 17 of the 18 surveyed EUs. Only one EU, Yendi, did not achieve the TT elimination threshold. A scheduled house-by-house TT case search in this EU coupled with surgery to clear the backlog of cases is necessary in order for Ghana to request validation of elimination of trachoma as a public health problem.

  10. Approaches to Integrating Engineering in STEM Units and Student Achievement Gains

    ERIC Educational Resources Information Center

    Crotty, Elizabeth A.; Guzey, Selcen S.; Roehrig, Gillian H.; Glancy, Aran W.; Ring-Whalen, Elizabeth A.

    2017-01-01

    This study examined different approaches to integrating engineering practices in science, technology, engineering, and mathematics (STEM) curriculum units. These various approaches were correlated with student outcomes on engineering assessment items. There are numerous reform documents in the USA and around the world that emphasize the need to…

  11. 77 FR 73557 - Airworthiness Directives; Turbomeca S.A. Turboshaft Engines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-11

    ... turboshaft engines. This proposed AD was prompted by a finding that the engine's tachometer unit cycle... tachometer's unit cycle counting feature. This proposed AD would also require ground-run functional checks... accuracy of the engine's tachometer cycle counting feature. We are proposing this AD to prevent uncontained...

  12. Support for non-locking parallel reception of packets belonging to a single memory reception FIFO

    DOEpatents

    Chen, Dong [Yorktown Heights, NY; Heidelberger, Philip [Yorktown Heights, NY; Salapura, Valentina [Yorktown Heights, NY; Senger, Robert M [Yorktown Heights, NY; Steinmacher-Burow, Burkhard [Boeblingen, DE; Sugawara, Yutaka [Yorktown Heights, NY

    2011-01-27

    A method and apparatus for distributed parallel messaging in a parallel computing system. A plurality of DMA engine units are configured in a multiprocessor system to operate in parallel, one DMA engine unit for transferring a current packet received at a network reception queue to a memory location in a memory FIFO (rmFIFO) region of a memory. A control unit implements logic to determine whether any prior received packet destined for that rmFIFO is still in a process of being stored in the associated memory by another DMA engine unit of the plurality, and prevent the one DMA engine unit from indicating completion of storing the current received packet in the reception memory FIFO (rmFIFO) until all prior received packets destined for that rmFIFO are completely stored by the other DMA engine units. Thus, there is provided non-locking support so that multiple packets destined for a single rmFIFO are transferred and stored in parallel to predetermined locations in a memory.

  13. Intestinal metabolism of weaned piglets fed a typical United States or European diet with or without supplementation of tributyrin and lactitol.

    PubMed

    Piva, A; Grilli, E; Fabbri, L; Pizzamiglio, V; Gatta, P P; Galvano, F; Bognanno, M; Fiorentini, L; Woliński, J; Zabielski, R; Patterson, J A

    2008-11-01

    The aim of the study was to investigate the effects of supplementation of a microencapsulated blend of tributyrin and lactitol (TL) to a standard European (EU) diet without antibiotic growth promoters on intestinal metabolism and mucosa development of weaned piglets and to compare it with a standard US diet containing animal proteins, zinc oxide, copper sulfate, and carbadox. Ninety piglets weaned at 21 d were divided into 3 dietary groups consisting of 5 replicates each: 1) US diet supplemented with 55 mg/kg of carbadox, and 2.5% each of plasma proteins and spray-dried blood cells in the first phase, 3,055 mg/kg of Zn in the first and second phases, and 180 mg/kg of Cu in the third phase; 2) EU diet based on vegetable proteins and no antibiotics; and 3) the same EU diet supplemented with 3,000 mg/kg of microencapsulated TL. The study was divided into 3 phases: 0 to 7, 8 to 21, and 22 to 35 d. On d 7, 21, and 35, animals were weighed, and feed consumption and efficiency were determined. On d 14 and 35, one pig per pen was killed, and the intestinal contents and mucosa from the proximal, middle, distal jejunum and the ileum were sampled. Intestinal wall sections were fixed for histological analysis, and intestinal content was used for VFA, ammonia, and polyamine analysis. Throughout the study (d 0 to 35), the US diet had greater ADG and ADFI than the EU diet (P < 0.05). The EU diet supplemented with TL tended to have 11% greater ADG (P = 0.17). Feeding the EU diet caused a reduction in proximal and middle jejunum villi length by 10% (P < 0.05) and an increase in crypt size in proximal jejunum (P < 0.05) compared with the US diet, probably due to an increased rate of cell loss and crypt cell production. The TL supplementation resulted in longer villi along the jejunum and less deep crypts in the proximal jejunum (+15.9 and -8.9%, respectively; P < 0.05) than the unsupplemented EU diet. The TL diet increased the concentrations of cadaverine and putrescine in the small intestine (P < 0.05) and seemed to increase cadaverine, histamine, putrescine, and spermine in the large intestine by 1.5- to 10-fold compared with the US or EU diet. In conclusion, although the US diet had a greater effect on growth performance and mucosal trophic status than the EU diets, the supplementation with slowly released TL seemed to be an effective tool to partially overcome the adverse effects of vegetable protein diets.

  14. Workplace Determinants of Endotoxin Exposure in Dental Healthcare Facilities in South Africa

    PubMed Central

    Singh, Tanusha S.; Bello, Braimoh; Mabe, Onnicah D.; Renton, Kevin; Jeebhay, Mohamed F.

    2010-01-01

    Objectives: Aerosols generated during dental procedures have been reported to contain endotoxin as a result of bacterial contamination of dental unit water lines. This study investigated the determinants of airborne endotoxin exposure in dental healthcare settings. Methods: The study population included dental personnel (n = 454) from five academic dental institutions in South Africa. Personal air samples (n = 413) in various dental jobs and water samples (n = 403) from dental handpieces and basin taps were collected. The chromogenic-1000 limulus amebocyte lysate assay was used to determine endotoxin levels. Exposure metrics were developed on the basis of individually measured exposures and average levels within each job category. Analysis of variance and multivariate linear regression models were constructed to ascertain the determinants of exposure in the dental group. Results: There was a 2-fold variation in personal airborne endotoxin from the least exposed (administration) to the most exposed (laboratory) jobs (geometric mean levels: 2.38 versus 5.63 EU m−3). Three percent of personal samples were above DECOS recommended exposure limit (50 EU m−3). In the univariate linear models, the age of the dental units explained the most variability observed in the personal air samples (R2 = 0.20, P < 0.001), followed by the season of the year (R2 = 0.11, P < 0.001). Other variables such as institution and total number of dental units per institution also explained a modest degree of variability. A multivariate model explaining the greatest variability (adjusted R2 = 0.40, P < 0.001) included: the age of institution buildings, total number of dental units per institution, ambient temperature, ambient air velocity, endotoxin levels in water, job category (staff versus students), dental unit model type and age of dental unit. Conclusions: Apart from job type, dental unit characteristics are important predictors of airborne endotoxin levels in this setting. PMID:20044586

  15. Thermodynamic and Kinetic Behavior of the Polystyrene/Poly(vinyl methyl ether) Blend as Studied by Excimer Fluorescence.

    DTIC Science & Technology

    1986-01-02

    AD-A±63 895 THERMODYNAMIC AND KINETIC BEHAVIOR OF THE / POLYSTYRENE/POLY(YINYL METHYL E..(U) STANFORD UNIY CALIFDEPT OF CHEMICAL ENGINEERING C N...Polystyrene/Poly(vinyl methyl ether) Blend 7. DEcFRMN 81 toOR 30USptE8 00~ as Studied by Excimer Fluorescence 6 EFRIGOG EOTNME *AUTHOR() a. CONTRACT OR GRANT...werea fondoare ihemoriisof * ~ Ex e sp fluodecositionsdu to deud Gen e and hoog Pinus Florsneis shownhase migrationprocSECURITY CLASIFICTIO OFd

  16. New drought indices from the assimilation of satellite data

    NASA Astrophysics Data System (ADS)

    Calvet, Jean-Christophe; Barbu, Alina; Fairbairn, David

    2016-04-01

    The current agricultural drought indicators produced by Meteo-France are derived from digital simulations of soil moisture produced by the SURFEX modelling platform. In the framework of the IMAGINES European project, a research was conducted in order to assess the impact on the monitoring of agricultural droughts of the integration of satellite data into SURFEX. A data assimilation system was implemented to this end. It provides simulations of the biomass and leaf area index of straw cereals and grasslands over France. It is shown that these simulations can be improved through the assimilation of satellite products distributed in near-real-time by the Copernicus Global Land service (http://land.copernicus.eu/global/). Reference in situ observations of the agricultural yields show that using satellite data, a significant correlation between the maximum annual above-ground biomass simulated by SURFEX and the agricultural yield at the scale of administrative units (départements) can be achieved. Without satellite data, very low correlations are observed. It is also shown that new 10-day drought indicators, complementary to soil moisture, can be derived from the leaf area index and from the above-ground biomass of vegetation. These demonstration drought monitoring products for the 2008-2013 period are freely available on the project web site (http://fp7-imagines.eu/) for 45 administrative units for cereals and for 48 administrative units for grasslands.

  17. Locomotive Emission and Engine Idle Reduction Technology Demonstration Project

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    John R. Archer

    2005-03-14

    In response to a United States Department of Energy (DOE) solicitation, the Maryland Energy Administration (MEA), in partnership with CSX Transportation, Inc. (CSXT), submitted a proposal to DOE to support the demonstration of Auxiliary Power Unit (APU) technology on fifty-six CSXT locomotives. The project purpose was to demonstrate the idle fuel savings, the Nitrous Oxide (NOX) emissions reduction and the noise reduction capabilities of the APU. Fifty-six CSXT Baltimore Division locomotives were equipped with APUs, Engine Run Managers (ERM) and communications equipment to permit GPS tracking and data collection from the locomotives. Throughout the report there is mention of themore » percent time spent in the State of Maryland. The fifty-six locomotives spent most of their time inside the borders of Maryland and some spent all their time inside the state borders. Usually when a locomotive traveled beyond the Maryland State border it was into an adjoining state. They were divided into four groups according to assignment: (1) Power Unit/Switcher Mate units, (2) Remote Control units, (3) SD50 Pusher units and (4) Other units. The primary data of interest were idle data plus the status of the locomotive--stationary or moving. Also collected were main engine off, idling or working. Idle data were collected by county location, by locomotive status (stationary or moving) and type of idle (Idle 1, main engine idling, APU off; Idle 2, main engine off, APU on; Idle 3, main engine off, APU off; Idle 4, main engine idle, APU on). Desirable main engine idle states are main engine off and APU off or main engine off and APU on. Measuring the time the main engine spends in these desirable states versus the total time it could spend in an engine idling state allows the calculation of Percent Idle Management Effectiveness (%IME). IME is the result of the operation of the APU plus the implementation of CSXT's Warm Weather Shutdown Policy. It is difficult to separate the two. The units demonstrated an IME of 64% at stationary idle for the test period. The data collected during calendar year 2004 demonstrated that 707,600 gallons of fuel were saved and 285 tons of NOX were not emitted as a result of idle management in stationary idle, which translates to 12,636 gallons and 5.1 tons of NOx per unit respectively. The noise reduction capabilities of the APU demonstrated that at 150 feet from the locomotive the loaded APU with the main engine shut down generated noise that was only marginally above ambient noise level.« less

  18. Advanced Networks in Dental Rich Online MEDiA (ANDROMEDA)

    NASA Astrophysics Data System (ADS)

    Elson, Bruce; Reynolds, Patricia; Amini, Ardavan; Burke, Ezra; Chapman, Craig

    There is growing demand for dental education and training not only in terms of knowledge but also skills. This demand is driven by continuing professional development requirements in the more developed economies, personnel shortages and skills differences across the European Union (EU) accession states and more generally in the developing world. There is an excellent opportunity for the EU to meet this demand by developing an innovative online flexible learning platform (FLP). Current clinical online systems are restricted to the delivery of general, knowledge-based training with no easy method of personalization or delivery of skill-based training. The PHANTOM project, headed by Kings College London is developing haptic-based virtual reality training systems for clinical dental training. ANDROMEDA seeks to build on this and establish a Flexible Learning Platform that can integrate the haptic and sensor based training with rich media knowledge transfer, whilst using sophisticated technologies such as including service-orientated architecture (SOA), Semantic Web technologies, knowledge-based engineering, business intelligence (BI) and virtual worlds for personalization.

  19. A luminescent ratiometric pH sensor based on a nanoscale and biocompatible Eu/Tb-mixed MOF.

    PubMed

    Xia, Tifeng; Zhu, Fengliang; Jiang, Ke; Cui, Yuanjing; Yang, Yu; Qian, Guodong

    2017-06-13

    The precise and real-time monitoring of localized pH changes is of great importance in many engineering and environmental fields, especially for monitoring small pH changes in biological environments and living cells. Metal-organic frameworks (MOFs) with their nanoscale processability show very promising applications in bioimaging and biomonitoring, but the fabrication of nanoscale MOFs is still a challenge. In this study, we synthesized a nanoscale mixed-lanthanide metal-organic framework by a microemulsion method. The morphology and size of the NMOF can be simply adjusted by the addition of different amounts of the CTAB surfactant. This NMOF exhibits significant pH-dependent luminescence emission, which can act as a self-referenced pH sensor based on two emissions of Tb 3+ at 545 nm and Eu 3+ at 618 nm in the pH range from 3.00 to 7.00. The MTT assay and optical microscopy assay demonstrate the low cytotoxicity and good biocompatibility of the nanosensor.

  20. Macroeconomic analysis of road vehicles related environmental pollution in Hungary

    NASA Astrophysics Data System (ADS)

    Török, Árpád; Török, Ádám

    2014-06-01

    The article aims to examine the relationship between road transport and macro economy, especially the use of fossil energy in transport sector. Nowadays environmental pollution is a key issue on the EU level as well as in Hungary. Lots of effort have been already done in order to decrease emissions in road transport, but a lot more need to be done. The article aims to prove that the only possible solution is technological innovation in order to reach emission reduction target without decline of the GDP. The basic idea is to ensure sustainable development, to decrease environmental pollution in road transport without harming the economy. In the EU and in Hungary road vehicles are powered by fossil fuelled internal combustion engines. This paper aims to analyse the role of the fossil fuel-based road transport sector within the economy with the usage of constant elasticity substitution (CES) production functions. Authors have built CES production function for Hungary. Parameters were calculated based on the validated model.

  1. AUTOMOTIVE DIESEL MAINTENANCE 1. UNIT XI, PART I--MAINTAINING THE FUEL SYSTEM (PART I), CUMMINS DIESEL ENGINES, PART II--UNIT REPLACEMENT (ENGINE).

    ERIC Educational Resources Information Center

    Human Engineering Inst., Cleveland, OH.

    THIS MODULE OF A 30-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF DIFFERENCES BETWEEN TWO AND FOUR CYCLE ENGINES, THE OPERATION AND MAINTENANCE OF THE DIESEL ENGINE FUEL SYSTEM, AND THE PROCEDURES FOR DIESEL ENGINE REMOVAL. TOPICS ARE (1) REVIEW OF TWO CYCLE AND FOUR CYCLE CONCEPT, (2) SOME BASIC CHARACTERISTICS OF FOUR CYCLE ENGINES,…

  2. Comparison of nutrient profiling schemes for restricting the marketing of food and drink to children.

    PubMed

    Brinsden, H; Lobstein, T

    2013-08-01

    The food and beverage industry have made voluntary pledges to reduce children's exposure to the marketing of energy-dense foods and beverages, and in 2012 announced the replacement of company-specific nutrient profiling schemes with uniform sets of criteria from 2013 (in the USA) and 2014 (in the European Union [EU]). To compare the proposed USA and EU nutrient profiling schemes and three government-led schemes, paying particular attention to the differences in sugar criteria. Food and beverage products permitted to be advertised in the USA under pre-2013 criteria were examined using five nutrient profiling schemes: the forthcoming USA and EU schemes and three government-approved schemes: the US Interagency Working Group (IWG) proposals, the United Kingdom Office of Communications (OfCom) regulations and the Danish Forum co-regulatory Code. Under the new USA and EU nutrient profiling schemes, 88 (49%) and 73 (41%) of a total of 178 products would be permitted to be advertised, respectively. The US IWG permitted 25 (14%) products; the Ofcom regulations permitted 65 (37%) and the Danish Code permitted 13 (7%). Government-led schemes are significantly more restrictive than industry-led schemes, primarily due to their tougher sugar criteria. The Danish Forum (93%) and USA IWG scheme (86%) are the most restrictive of the five examined. Further harmonization of nutrient profiling schemes is needed to reduce children's exposure to the promotion of energy-dense foods. © 2013 The Authors. Pediatric Obesity © 2013 International Association for the Study of Obesity.

  3. Analytical and functional similarity of Amgen biosimilar ABP 215 to bevacizumab

    PubMed Central

    Seo, Neungseon; Polozova, Alla; Zhang, Mingxuan; Yates, Zachary; Cao, Shawn; Li, Huimin; Kuhns, Scott; Maher, Gwendolyn; McBride, Helen J.; Liu, Jennifer

    2018-01-01

    ABSTRACT ABP 215 is a biosimilar product to bevacizumab. Bevacizumab acts by binding to vascular endothelial growth factor A, inhibiting endothelial cell proliferation and new blood vessel formation, thereby leading to tumor vasculature normalization. The ABP 215 analytical similarity assessment was designed to assess the structural and functional similarity of ABP 215 and bevacizumab sourced from both the United States (US) and the European Union (EU). Similarity assessment was also made between the US- and EU-sourced bevacizumab to assess the similarity between the two products. The physicochemical properties and structural similarity of ABP 215 and bevacizumab were characterized using sensitive state-of-the-art analytical techniques capable of detecting small differences in product attributes. ABP 215 has the same amino acid sequence and exhibits similar post-translational modification profiles compared to bevacizumab. The functional similarity assessment employed orthogonal assays designed to interrogate all expected biological activities, including those known to affect the mechanisms of action for ABP 215 and bevacizumab. More than 20 batches of bevacizumab (US) and bevacizumab (EU), and 13 batches of ABP 215 representing unique drug substance lots were assessed for similarity. The large dataset allows meaningful comparisons and garners confidence in the overall conclusion for the analytical similarity assessment of ABP 215 to both US- and EU-sourced bevacizumab. The structural and purity attributes, and biological properties of ABP 215 are demonstrated to be highly similar to those of bevacizumab. PMID:29553864

  4. Environmental Engineering Unit Operations and Unit Processes Laboratory Manual.

    ERIC Educational Resources Information Center

    O'Connor, John T., Ed.

    This manual was prepared for the purpose of stimulating the development of effective unit operations and unit processes laboratory courses in environmental engineering. Laboratory activities emphasizing physical operations, biological, and chemical processes are designed for various educational and equipment levels. An introductory section reviews…

  5. Reactor engineering support of operations at the Davis-Besse nuclear power station

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kelley, D.B.

    1995-12-31

    Reactor engineering functions differ greatly from unit to unit; however, direct support of the reactor operators during reactor startups and operational transients is common to all units. This paper summarizes the support the reactor engineers provide the reactor operators during reactor startups and power changes through the use of automated computer programs at the Davis-Besse nuclear power station.

  6. POLLUTION PREVENTION OPPORTUNITY ASSESSMENT UNITED STATES ARMY CORPS OF ENGINEERS PITTSBURGH ENGINEER WAREHOUSE AND REPAIR STATION AND EMSWORTH LOCKS AND DAMS PITTSBURGH, PENNSYLVANIA

    EPA Science Inventory

    This report summarizes work conducted at the United States Army Corps of Engineers (USACE) Pittsburgh Engineering Warehouse and Repair Station (PEWARS) and Emsworth Locks and Dams in Pittsburgh, Pennsylvania under the U.S. Environmental Protection Agency's (EPA's) Waste Reduction...

  7. Get a Grip! A Middle School Engineering Challenge

    ERIC Educational Resources Information Center

    Olds, Suzanne A.; Harrell, Deborah A.; Valente, Michael E.

    2006-01-01

    Investigating the field of engineering offers the opportunity for interdisciplinary, hands-on, inquiry-based units that integrate real-world applications. However, many K-12 students are not exposed to engineering until they enter college. Get a Grip! is a problem-based unit that places middle school students in the role of engineers who are…

  8. AUTOMOTIVE DIESEL MAINTENANCE L. UNIT XII, PART I--MAINTAINING THE FUEL SYSTEM (PART II), CUMMINS DIESEL ENGINE, PART II--UNIT INSTALLATION (ENGINE).

    ERIC Educational Resources Information Center

    Human Engineering Inst., Cleveland, OH.

    THIS MODULE OF A 30-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE OPERATION AND MAINTENANCE OF THE DIESEL ENGINE FUEL SYSTEM AND THE PROCEDURES FOR DIESEL ENGINE INSTALLATION. TOPICS ARE FUEL FLOW CHARACTERISTICS, PTG FUEL PUMP, PREPARATION FOR INSTALLATION, AND INSTALLING ENGINE. THE MODULE CONSISTS OF A SELF-INSTRUCTIONAL BRANCH…

  9. Diabetes Device Reimbursement in the EU-5

    PubMed Central

    Attorney, Elmar Schäfer; Schnell, Gerald; Bobáková, Tamara

    2013-01-01

    The reimbursement landscape for new and innovative diabetes devices in Europe is very heterogeneous and nontransparent, with each country employing different mechanisms, pathways, and requirements. This article provides an overview of how diabetes device reimbursement works in the outpatient setting in the five major European Union markets (France, Germany, Italy, Spain, and the United Kingdom; the EU-5). It will be of particular interest to manufacturers of innovative devices. Markets are first categorized as either a centralized or a regionalized reimbursement decision-making system, and implications for device reimbursement are explored. In the second part, specific requirements and success factors for wide reimbursement in the EU-5 are analyzed in detail. Gaining early acceptance by the main influencers (key opinion leaders and payers) is the first step. Equally important is the provision of convincing evidence, be this clinical, health–economic (cost-effectiveness), or a demonstration of cost savings (budget impact). In some countries, local usage data may be a requirement as well. Lastly, as payers’ willingness to pay stems directly from their perceived value of a device, a key success factor and a necessary precondition for manufacturers is to set the right price. PMID:23911192

  10. The extent of food waste generation across EU-27: different calculation methods and the reliability of their results.

    PubMed

    Bräutigam, Klaus-Rainer; Jörissen, Juliane; Priefer, Carmen

    2014-08-01

    The reduction of food waste is seen as an important societal issue with considerable ethical, ecological and economic implications. The European Commission aims at cutting down food waste to one-half by 2020. However, implementing effective prevention measures requires knowledge of the reasons and the scale of food waste generation along the food supply chain. The available data basis for Europe is very heterogeneous and doubts about its reliability are legitimate. This mini-review gives an overview of available data on food waste generation in EU-27 and discusses their reliability against the results of own model calculations. These calculations are based on a methodology developed on behalf of the Food and Agriculture Organization of the United Nations and provide data on food waste generation for each of the EU-27 member states, broken down to the individual stages of the food chain and differentiated by product groups. The analysis shows that the results differ significantly, depending on the data sources chosen and the assumptions made. Further research is much needed in order to improve the data stock, which builds the basis for the monitoring and management of food waste. © The Author(s) 2014.

  11. Chiroptical methods in a wide wavelength range for obtaining Ln3+ complexes with circularly polarized luminescence of practical interest.

    PubMed

    Górecki, Marcin; Carpita, Luca; Arrico, Lorenzo; Zinna, Francesco; Di Bari, Lorenzo

    2018-05-29

    We studied enantiopure chiral trivalent lanthanide (Ln3+ = La3+, Sm3+, Eu3+, Gd3+, Tm3+, and Yb3+) complexes with two fluorinated achiral tris(β-diketonate) ligands (HFA = hexafluoroacetylacetonate and TTA = 2-thenoyltrifluoroacetonate), incorporating a chiral bis(oxazolinyl)pyridine (PyBox) unit as a neutral ancillary ligand, by the combined use of optical and chiroptical methods, ranging from UV to IR both in absorption and circular dichroism (CD), and including circularly polarized luminescence (CPL). Ultimately, all the spectroscopic information is integrated into a total and a chiroptical super-spectrum, which allows one to characterize a multidimensional chemical space, spanned by the different Ln3+ ions, the acidity and steric demand of the diketone and the chirality of the PyBox ligand. In all cases, the Ln3+ ions endow the systems with peculiar chiroptical properties, either allied to f-f transitions or induced by the metal onto the ligand. In more detail, we found that Sm3+ complexes display interesting CPL features, which partly superimpose and partly integrate the more common Eu3+ properties. Especially, in the context of security tags, the pair Sm/Eu may be a winning choice for chiroptical barcoding.

  12. Pinhole shifting lifetime imaging microscopy

    PubMed Central

    Ramshesh, Venkat K.; Lemasters, John J.

    2009-01-01

    Lifetime imaging microscopy is a powerful tool to probe biological phenomena independent of luminescence intensity and fluorophore concentration. We describe time-resolved imaging of long-lifetime luminescence with an unmodified commercial laser scanning confocal/multiphoton microscope. The principle of the measurement is displacement of the detection pinhole to collect delayed luminescence from a position lagging the rasting laser beam. As proof of principle, luminescence from microspheres containing europium (Eu3+), a red emitting probe, was compared to that of short-lifetime green-fluorescing microspheres and/or fluorescein and rhodamine in solution. Using 720-nm two-photon excitation and a pinhole diameter of 1 Airy unit, the short-lifetime fluorescence of fluorescein, rhodamine and green microspheres disappeared much more rapidly than the long-lifetime phosphorescence of Eu3+ microspheres as the pinhole was repositioned in the lagging direction. In contrast, repositioning of the pinhole in the leading and orthogonal directions caused equal loss of short- and long-lifetime luminescence. From measurements at different lag pinhole positions, a lifetime of 270 μs was estimated for the Eu3+ microspheres, consistent with independent measurements. This simple adaptation is the basis for quantitative 3-D lifetime imaging microscopy. PMID:19123648

  13. Multifunctional nanocomposites of lanthanide (Eu3+, Tb3+) complexes functionalized magnetic mesoporous silica nanospheres covalently bonded with polymer modified ZnO.

    PubMed

    Yan, Bing; Shao, Yan-Fei

    2013-07-14

    Methacrylic-group-modified ZnO nanoparticles (designated ZnO-MAA) prepared through the sol-gel process are copolymerized with 2-hydroxyethyl methacrylate (HEMA) to form ZnO-MAA-PHEMA hybrid system. ZnO-MAA-PHEMA unit is functionalized with 3-(triethoxysilyl)-propyl isocyanate (TEPIC) to form ZnO-MAA-PHEMA-Si hybrids, and then is incorporated with oleic acid-modified Fe3O4 nanoparticles by co-condensation of tetraethoxysilane (TEOS) and ZnO-MAA-PHEMA-Si. Subsequently, ZnO-polymer covalently bonded mesoporous silica nanospheres are assembled using cetyltrimethylammonium bromide (CTAB) surfactant as template. Furthermore, lanthanide (Eu(3+), Tb(3+)) complexes with nicotinic acid (NTA), isonicotinic acid (INTA) and 2-chloronicotinic (CNTA) are introduced by coordination bonds, resulting in the final multifunctional nanocomposites. The detailed physical characterization of these hybrids is discussed in detail. It reveals that they possess both magnetic and luminescent properties. Especially Eu(ZnO-MMS)(CNTA)3 and Tb(ZnO-MMS)(NTA)3 present high quantum yield values of 32.2% and 68.5%, respectively. The results will lay the foundation for further application in biomedical and biopharmaceutical fields.

  14. A revaluation of the cultural dimension of disability policy in the European Union: the impact of digitization and web accessibility.

    PubMed

    Ferri, Delia; Giannoumis, G Anthony

    2014-01-01

    Reflecting the commitments undertaken by the EU through the conclusion of the United Nations Convention on the Rights of Persons with Disabilities (UNCRPD), the European Disability Strategy 2010–2020 not only gives a prominent position to accessibility, broadly interpreted, but also suggests an examination of the obligations for access to cultural goods and services. The European Disability Strategy 2010–2020 expressly acknowledges that EU action will support national activities to make sports, leisure, cultural and recreational organizations and activities accessible, and use the possibilities for copyright exceptions in the Directive 2001/29/EC (Infosoc Directive). This article discusses to what extent the EU has realized the principle of accessibility and the right to access cultural goods and services envisaged in the UNCRPD. Previous research has yet to explore how web accessibility and digitization interact with the cultural dimension of disability policy in the European Union. This examination attempts to fill this gap by discussing to what extent the European Union has put this cultural dimension into effect and how web accessibility policies and the digitization of cultural materials influence these efforts.

  15. Review of the coal-fired, over-supercritical and ultra-supercritical steam power plants

    NASA Astrophysics Data System (ADS)

    Tumanovskii, A. G.; Shvarts, A. L.; Somova, E. V.; Verbovetskii, E. Kh.; Avrutskii, G. D.; Ermakova, S. V.; Kalugin, R. N.; Lazarev, M. V.

    2017-02-01

    The article presents a review of developments of modern high-capacity coal-fired over-supercritical (OSC) and ultra-supercritical (USC) steam power plants and their implementation. The basic engineering solutions are reported that ensure the reliability, economic performance, and low atmospheric pollution levels. The net efficiency of the power plants is increased by optimizing the heat balance, improving the primary and auxiliary equipment, and, which is the main thing, by increasing the throttle conditions. As a result of the enhanced efficiency, emissions of hazardous substances into the atmosphere, including carbon dioxide, the "greenhouse" gas, are reduced. To date, the exhaust steam conditions in the world power industry are p 0 ≈ 30 MPa and t 0 = 610/620°C. The efficiency of such power plants reaches 47%. The OSC plants are being operated in Germany, Denmark, Japan, China, and Korea; pilot plants are being developed in Russia. Currently, a project of a power plant for the ultra-supercritical steam conditions p 0 ≈ 35 MPa and t 0 = 700/720°C with efficiency of approximately 50% is being studied in the EU within the framework of the Thermie AD700 program, project AD 700PF. Investigations in this field have also been launched in the United States, Japan, and China. Engineering solutions are also being sought in Russia by the All-Russia Thermal Engineering Research Institute (VTI) and the Moscow Power Engineering Institute. The stated steam parameter level necessitates application of new materials, namely, nickel-base alloys. Taking into consideration high costs of nickel-base alloys and the absence in Russia of technologies for their production and manufacture of products from these materials for steam-turbine power plants, the development of power plants for steam parameters of 32 MPa and 650/650°C should be considered to be the first stage in creating the USC plants as, to achieve the above parameters, no expensive alloys are require. To develop and construct OSC and USC head power plants, joint efforts of the government, experts in power industry and metallurgy, scientific institutions, and equipment manufacturers are required.

  16. "Europe/Asia" Regionalism, Higher Education and the Production of World Order

    ERIC Educational Resources Information Center

    Robertson, Susan

    2008-01-01

    From the early 1990s onwards, various European Union (EU) reports have commented on the low level of European exports and foreign direct investment (FDI) in the Asian region, and the invisibility of Europe in the Asian imagination in comparison with the United States. To overcome this problem, a series of policy and programme initiatives have been…

  17. Lessons from Central and Southeast Europe for the Expanding Alliances

    DTIC Science & Technology

    2008-06-01

    more than a token material and personnel contribution to alliances? Examining three geographically close but historically distinct cases, Austria...security regimes such as the United Nations, North Atlantic Treaty Organization and the European Union . Second, the three nations’ historical and...Collective Security, Collective Defense, Civil-Military Relations, North Atlantic Treaty Organization (NATO), European Union (EU) Common Foreign and

  18. Monitoring Forest Condition in Europe: Impacts of Nitrogen and Sulfur Depositions on Forest Ecosystems

    Treesearch

    M. Lorenz; G. Becher; V. Mues; E. Ulrich

    2006-01-01

    Forest condition in Europe has been monitored over 19 years jointly by the United Nations Economic Commission for Europe (UNECE) and the European Union (EU). Large-scale variations of forest condition over space and time in relation to natural and anthropogenic factors are assessed on about 6,000 plots systematically spread across Europe. This large-scale monitoring...

  19. Social Networks and Workplace Risk: Classroom Scenarios from a U.S. and EU Perspective

    ERIC Educational Resources Information Center

    Binder, Perry; Mansfield, Nancy R.

    2013-01-01

    The explosion of social networks and the growing concern over privacy in the digital age--both in the United States and Europe--have provided an opportunity to introduce students to the legal risks of using social media in the workplace. This article builds on the authors' classroom experiences and provides social media scenarios and projects that…

  20. European Union's Moratorium Impact on Food Biotechnology: A Discussion-Based Scenario

    ERIC Educational Resources Information Center

    Snyder, Lori Unruh; Gallo, Maria; Fulford, Stephen G.; Irani, Tracy; Rudd, Rick; DiFino, Sharon M.; Durham, Timothy C.

    2008-01-01

    Genetically modified (GM) crops such as maize (Zea mays L.), cotton (Gossypium hirsutum L.), soybean [Glycine max (L.) Moench], and canola (Brassica rapa L.) have been widely adopted by American farmers. In spite of their use in the United States, the European Union (EU) imposed a 6-year de facto moratorium (1998-2004) on the cultivation/import of…

  1. 76 FR 16700 - Importation of French Beans and Runner Beans From the Republic of Kenya Into the United States

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-25

    ... seen during inspection. In addition to causing obvious damage, Maconellicoccus hirsutus is a pink hibiscus mealy bug whose grayish-pink bodies are covered with mealy white wax and with white wax filaments...). The EU provides a well-established market and it is unlikely that there would be a large diversion of...

  2. Government policies increasingly promote renewable energy sources : wood energy markets in the UNECE region, 2009-2010

    Treesearch

    Olle Olsson; Bengt Hillring; Rens Hartkamp; Kenneth Skog; Henry Spelter; Francisco Aguilar; Warren Mabee; Christopher Gaston; Antje Wahl

    2010-01-01

    Sustainability issues about wood fuels are increasingly being debated, but the European Union has decided not to impose EU-wide sustainability criteria for solid biomass. United Kingdom energy companies plan massive increases in their utilization of wood energy, further fuelling European demand for wood energy. In order to increase control of the value chain, European...

  3. Crystal structure of the new A2SnTa6X18 (A = K, Rb, Cs; X = Cl, Br) cluster compounds

    NASA Astrophysics Data System (ADS)

    Lemoine, P.; Wilmet, M.; Malaman, B.; Paofai, S.; Dumait, N.; Cordier, S.

    2018-01-01

    The crystal structure of the new cluster compounds A2SnTa6X18 (with A = K, Rb, Cs, and X = Cl, Br) was determined by using single-crystal and powder X-ray diffraction, and 119Sn Mössbauer spectroscopy. Those compounds crystallize in the Cs2EuNb6Br18-type structure of space group R 3 ̅. This type of structure is built up on discrete edge-bridged [M6Xi12Xa6]4- cluster units arranged according to a pseudo face-centered cubic stacking, where the octahedral and tetrahedral vacancies are fully occupied by divalent tin cations and monovalent alkaline cations, respectively. The tin cations influence on the halogen matrix and the electronic effects on the cluster units in the Cs2EuNb6Br18-type structure are discussed by comparison with isotype compounds. From those analyses, the ionic radius of Sn2+ in coordination number VI is estimated to be 1.14(1) Å. Finally, K2SnTa6Br18 might be considered as a new example of compound containing a quite bare stannous ion (5 s2 configuration).

  4. Endocrine Disruptors

    PubMed Central

    2015-01-01

    Law and science combine in the estimation of risks from endocrine disruptors (EDs) and actions for their regulation. For both, dose–response models are the causal link between exposure and probability (or percentage change) of adverse response. The evidence that leads to either regulations or judicial decrees is affected by uncertainty and limited knowledge, raising difficult policy issues that we enumerate and discuss. In the United States, some courts have dealt with EDs, but causation based on animal studies has been a stumbling block for plaintiffs seeking compensation, principally because those courts opt for epidemiological evidence. The European Union (EU) has several regulatory tools and ongoing research on the risks associated with bisphenol A, under the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) Regulation and other regulations or directives. The integration of a vast (in kind and in scope) number of research papers into a statement of causation for either policy or to satisfy legal requirements, in both the United States and the EU, relies on experts. We outline the discursive dilemma and issues that may affect consensus-based results and a Bayesian causal approach that accounts for the evolution of information, yielding both value of information and flexibility associated with public choices. PMID:26740809

  5. Multichannel Luminescence Properties of Mixed-Valent Eu2+/Eu3+ Coactivated SrAl3BO7 Nanocrystalline Phosphors for Near-UV LEDs.

    PubMed

    Liu, Xiaoming; Xie, Weijie; Lü, Ying; Feng, Jingchun; Tang, Xinghua; Lin, Jun; Dai, Yuhua; Xie, Yu; Yan, Liushui

    2017-11-20

    Up to now, orchestrating the coexistence of Eu 2+ and Eu 3+ activators in a single host lattice has been an extremely difficult task, especially for the appearance of the characteristic emission of Eu 2+ and Eu 3+ in order to generate white light. Nevertheless, here we demonstrate a new Eu 2+ /Eu 3+ coactivated SrAl 3 BO 7 nanocrystalline phosphor with abundant and excellent multichannel luminescence properties. A series of Eu 2+ /Eu 3+ coactivated SrAl 3 BO 7 nanocrystalline phosphors were prepared through a Pechini-type sol-gel method followed by a reduction process. With excitation of UV/NUV light, the prepared SrAl 3 BO 7 :Eu 2+ ,Eu 3+ phosphors show not only the characteristic f-f transitions of Eu 3+ ion ( 5 D J → 7 F J,J' , J, J' = 0-3), but also the 5d → 4f transitions of Eu 2+ ion with comparable intensity from 400 to 700 nm in the whole visible spectral region. The luminescence color of the SrAl 3 BO 7 :Eu 2+ ,Eu 3+ phosphor can be tuned from blue, blue-green, white, and orange to orange-red by changing the excitation wavelength, the overall doping concentration of europium ions (Eu 2+ , Eu 3+ ), and the relative ratio of Eu 2+ to Eu 3+ ions to some extent. A single-phase white-light emission has been realized in SrAl 3 BO 7 :Eu 2+ ,Eu 3+ phosphor. The obtained SrAl 3 BO 7 :Eu 2+ ,Eu 3+ phosphor has potential application in the area of NUV white-light-emitting diodes.

  6. PILING PLAN OF SHIPBUILDING WAYS AND WHIRLEY CRANE SUPPORT. United ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PILING PLAN OF SHIPBUILDING WAYS AND WHIRLEY CRANE SUPPORT. United Engineering Company Ltd., Alameda Shipbuilding Plant. General plan and two sections. James J. Walsh, Consulting Engineer. Sheet no. 2. Scales 1 inch to 10 feet, and 1/4 inch to one foot. April 20, 1941, revised 5/7/41. blueprint - United Engineering Company Shipyard, Shipway Nos. 1 & 2, 2900 Main Street, Alameda, Alameda County, CA

  7. TRUSS DETAILS. United Engineering Company Ltd., Alameda Shipyard. Includes crane ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    TRUSS DETAILS. United Engineering Company Ltd., Alameda Shipyard. Includes crane girder section. No architect noted. Drawn by Penney. Plan no. 2-N-7. March 10, 1942, no revisions. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76, item no. 22A. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Warehouse, 2900 Main Street, Alameda, Alameda County, CA

  8. Geochemical compositions of Neoproterozoic to Lower Palaeozoic (?) shales and siltstones in the Volta Basin (Ghana): Constraints on provenance and tectonic setting

    NASA Astrophysics Data System (ADS)

    Amedjoe, Chiri G.; Gawu, S. K. Y.; Ali, B.; Aseidu, D. K.; Nude, P. M.

    2018-06-01

    Many researchers have investigated the provenance and tectonic setting of the Voltaian sediments using the geochemistry of sandstones in the basin. The shales and siltstones in the basin have not been used much in the provenance studies. In this paper, the geochemistry of shales and siltstones in the Kwahu Group and Oti Group of the Voltaian Supergroup from Agogo and environs in the southeastern section of the basin has constrained the provenance and tectonic setting. Trace element ratios La/Sc, Th/Sc and Cr/Th and REEs sensitive to average source compositions revealed sediments in the shales and siltstones may mainly be from felsic rocks, though contributions from old recycled sediments and some andesitic rock sediments were identified. The felsic rocks may be granites and/or granodiorites. Some intermediate rocks of andesitic composition are also identified, while the recycled sediments were probably derived from the basement metasedimentary rocks. The enrichment of light REE (LaN/YbN c. 7.47), negative Eu anomalies (Eu/Eu* c. 0.59), and flat heavy REE chondrite-normalized patterns, denote an upper-continental-crustal granitic source materials for the sediments. Trace-element ternary discriminant diagrams reveal passive margin settings for sediments, though some continental island arc settings sediments were also depicted. Mixing calculations based on REE concentrations and modeled chondrite-normalized REE patterns suggest that the Birimian basement complex may be the source of detritus in the Voltaian Basin. REEs are more associated with shales than siltstones. On this basis chondrite-normalized REE patterns show that shale lithostratigraphic units may be distinguished from siltstone lithostratigraphic units. The significant variability in shales elemental ratios can therefore be used to distinguish between shales of the Oti Group from that of the Kwahu Group.

  9. Characterization of airborne molds, endotoxins, and glucans in homes in New Orleans after Hurricanes Katrina and Rita.

    PubMed

    Rao, Carol Y; Riggs, Margaret A; Chew, Ginger L; Muilenberg, Michael L; Thorne, Peter S; Van Sickle, David; Dunn, Kevin H; Brown, Clive

    2007-03-01

    In August and September 2005, Hurricanes Katrina and Rita caused breeches in the New Orleans, LA, levee system, resulting in catastrophic flooding. The city remained flooded for several weeks, leading to extraordinary mold growth in homes. To characterize the potential risks of mold exposures, we measured airborne molds and markers of molds and bacteria in New Orleans area homes. In October 2005, we collected air samples from 5 mildly water-damaged houses, 15 moderately to heavily water-damaged houses, and 11 outdoor locations. The air filters were analyzed for culturable fungi, spores, (1-->3,1-->6)-beta-D-glucans, and endotoxins. Culturable fungi were significantly higher in the moderately/heavily water-damaged houses (geometric mean=67,000 CFU/m3) than in the mildly water-damaged houses (geometric mean=3,700 CFU/m3) (P=0.02). The predominant molds found were Aspergillus niger, Penicillium spp., Trichoderma, and Paecilomyces. The indoor and outdoor geometric means for endotoxins were 22.3 endotoxin units (EU)/m3 and 10.5 EU/m3, respectively, and for (1-->3,1-->6)-beta-D-glucans were 1.7 microg/m3 and 0.9 microg/m3, respectively. In the moderately/heavily water-damaged houses, the geometric means were 31.3 EU/m3 for endotoxins and 1.8 microg/m3 for (1-->3,1-->6)-beta-D-glucans. Molds, endotoxins, and fungal glucans were detected in the environment after Hurricanes Katrina and Rita in New Orleans at concentrations that have been associated with health effects. The species and concentrations were different from those previously reported for non-water-damaged buildings in the southeastern United States.

  10. Characterization of Airborne Molds, Endotoxins, and Glucans in Homes in New Orleans after Hurricanes Katrina and Rita▿

    PubMed Central

    Rao, Carol Y.; Riggs, Margaret A.; Chew, Ginger L.; Muilenberg, Michael L.; Thorne, Peter S.; Van Sickle, David; Dunn, Kevin H.; Brown, Clive

    2007-01-01

    In August and September 2005, Hurricanes Katrina and Rita caused breeches in the New Orleans, LA, levee system, resulting in catastrophic flooding. The city remained flooded for several weeks, leading to extraordinary mold growth in homes. To characterize the potential risks of mold exposures, we measured airborne molds and markers of molds and bacteria in New Orleans area homes. In October 2005, we collected air samples from 5 mildly water-damaged houses, 15 moderately to heavily water-damaged houses, and 11 outdoor locations. The air filters were analyzed for culturable fungi, spores, (1→3,1→6)-β-d-glucans, and endotoxins. Culturable fungi were significantly higher in the moderately/heavily water-damaged houses (geometric mean = 67,000 CFU/m3) than in the mildly water-damaged houses (geometric mean = 3,700 CFU/m3) (P = 0.02). The predominant molds found were Aspergillus niger, Penicillium spp., Trichoderma, and Paecilomyces. The indoor and outdoor geometric means for endotoxins were 22.3 endotoxin units (EU)/m3 and 10.5 EU/m3, respectively, and for (1→3,1→6)-β-d-glucans were 1.7 μg/m3 and 0.9 μg/m3, respectively. In the moderately/heavily water-damaged houses, the geometric means were 31.3 EU/m3 for endotoxins and 1.8 μg/m3 for (1→3,1→6)-β-d-glucans. Molds, endotoxins, and fungal glucans were detected in the environment after Hurricanes Katrina and Rita in New Orleans at concentrations that have been associated with health effects. The species and concentrations were different from those previously reported for non-water-damaged buildings in the southeastern United States. PMID:17209066

  11. Global trends in nasopharyngeal cancer mortality since 1970 and predictions for 2020: Focus on low-risk areas.

    PubMed

    Carioli, Greta; Negri, Eva; Kawakita, Daisuke; Garavello, Werner; La Vecchia, Carlo; Malvezzi, Matteo

    2017-05-15

    Nasopharyngeal cancer (NPC) mortality shows great disparity between endemic high risk areas, where non-keratinizing carcinoma (NKC) histology is prevalent, and non-endemic low risk regions, where the keratinizing squamous cell carcinoma (KSCC) type is more frequent. We used the World Health Organization database to calculate NPC mortality trends from 1970 to 2014 in several countries worldwide. For the European Union (EU), the United States (US) and Japan, we also predicted trends to 2020. In 2012, the highest age-standardized (world standard) rates were in Hong Kong (4.51/100,000 men and 1.15/100,000 women), followed by selected Eastern European countries. The lowest rates were in Northern Europe and Latin America. EU rates were 0.27/100,000 men and 0.09/100,000 women, US rates were 0.20/100,000 men and 0.08/100,000 women and Japanese rates were 0.16/100,000 men and 0.04/100,000 women. NPC mortality trends were favourable for several countries. The decline was -15% in men and -5% in women between 2002 and 2012 in the EU, -12% in men and -9% in women in the US and about -30% in both sexes in Hong Kong and Japan. The favourable patterns in Europe and the United States are predicted to continue. Changes in salted fish and preserved food consumption account for the fall in NKC. Smoking and alcohol prevalence disparities between sexes and geographic areas may explain the different rates and trends observed for KSCC and partially for NKC. Dietary patterns, as well as improvement in management of the disease, may partly account for the observed trends, too. © 2017 UICC.

  12. Construction and immunogenicity of a DNA vaccine coexpressing GP3 and GP5 of genotype-I porcine reproductive and respiratory syndrome virus

    PubMed Central

    2014-01-01

    Background The European (EU) genotype of porcine reproductive and respiratory syndrome virus (Genotype-I PRRSV) has recently emerged in China. The coexistence of Genotype-I and -II PRRSV strains could cause seriously affect PRRSV diagnosis and management. Current vaccines are not able to protect against PRRSV infection completely and have inherent drawbacks. Thus, genetically engineered vaccines, including DNA vaccine and live vector engineered vaccines, have been developed. This study aimed to determine the enhanced immune responses of mice inoculated with a DNA vaccine coexpressing GP3 and GP5 of a Genotype-I PRRSV. Results To evaluate the immunogenicity of GP3 and GP5 proteins from European-type PRRSV, three DNA vaccines, pVAX1-EU-ORF3-ORF5, pVAX1-EU-ORF3 and pVAX1-EU-ORF5, were constructed, which were based on a Genotype-I LV strain (GenBank ID: M96262). BALB/c mice were immunized with the DNA vaccines; delivered in the form of chitosan-DNA nanoparticles. To increase the efficiency of the vaccine, Quil A (Quillaja) was used as an adjuvant. GP3 and GP5-specific antibodies, neutralizing antibodies and cytokines (IL-2, IL-4, IL-10 and IFN gamma) from the immunized mice sera, and other immune parameters, were examined, including T-cell proliferation responses and subgroups of spleen T-lymphocytes. The results showed that ORF3 and ORF5 proteins of Genotype-I PRRSV induced GP3 and GP5-specific antibodies that could neutralize the virus. The levels of Cytokines IL-2, IL-4, IL-10, and IFN–γ of the experimental groups were significantly higher than those of control groups after booster vaccination (P < 0.05). The production of CD3+CD4+ and CD3+CD8+ T lymphocyte was also induced. T lymphocyte proliferation assays showed that the PRRSV LV strain virus could stimulate the proliferation of T lymphocytes in mice in the experimental group. Conclusions Using Quil A as adjuvant, Genotype-I PRRSV GP3 and GP5 proteins produced good immunogenicity and reactivity. More importantly, better PRRSV-specific neutralizing antibody titers and cell-mediated immune responses were observed in mice immunized with the DNA vaccine co-expressing GP3 and GP5 proteins than in mice immunized with a DNA vaccine expressing either protein singly. The results of this study demonstrated that co-immunization with GP3 and GP5 produced a better immune response in mice. PMID:24916952

  13. The Vi conjugate typhoid vaccine is safe, elicits protective levels of IgG anti-Vi, and is compatible with routine infant vaccines.

    PubMed

    Thiem, Vu Dinh; Lin, Feng-Ying C; Canh, Do Gia; Son, Nguyen Hong; Anh, Dang Duc; Mao, Nguyen Duc; Chu, Chiayung; Hunt, Steven W; Robbins, John B; Schneerson, Rachel; Szu, Shousun C

    2011-05-01

    Typhoid fever remains a serious problem in developing countries. Current vaccines are licensed for individuals who are 5 years old or older. A conjugate of the capsular polysaccharide (CP) of Salmonella enterica serovar Typhi (Vi) bound to recombinant exoprotein A of Pseudomonas aeruginosa (Vi-rEPA) enhanced Vi immunogenicity and protected 2- to 5-year-olds in Vietnam. In this study, Vi-rEPA was evaluated for use in infants. A total of 301 full-term Vietnamese infants received Expanded Program on Immunization (EPI) vaccines alone or with Vi-rEPA or Haemophilus influenzae type b-tetanus toxoid conjugate (Hib-TT) at 2, 4, and 6 months and Vi-rEPA or Hib-TT alone at 12 months. Infants were visited 6, 24, and 48 h after each injection to monitor adverse reactions. Maternal, cord, and infant sera were assayed for IgG anti-Vi and for IgG antibodies to Hib CP and the diphtheria, tetanus, and pertussis toxins at 7, 12, and 13 months. No vaccine-related serious adverse reactions occurred. In the Vi-rEPA group, the IgG anti-Vi geometric mean (GM) increased from the cord level of 0.66 to 17.4 enzyme-linked immunosorbent assay units (EU) at 7 months, declined to 4.76 EU at 12 months, and increased to 50.1 EU 1 month after the 4th dose (95% of infants had levels of ≥ 3.5 EU, the estimated protective level). Controls had no increase of the IgG anti-Vi GM. Infants with cord anti-Vi levels of <3.5 EU responded with significantly higher IgG anti-Vi levels than those with levels of ≥ 3.5 EU. Anti-diphtheria, -tetanus, and -pertussis toxin levels were similar in all groups. Vi-rEPA was safe, induced protective anti-Vi levels, and was compatible with EPI vaccines, and it can be used in infants. High cord IgG anti-Vi levels partially suppressed infant responses to Vi-rEPA.

  14. Process for Making Carbon-Carbon Turbocharger Housing Unit for Intermittent Combustion Engines

    NASA Technical Reports Server (NTRS)

    Northam, G. Burton (Inventor); Ransone, Philip O. (Inventor); Rivers, H. Kevin (Inventor)

    1999-01-01

    An improved. lightweight, turbine housing unit for an intermittent combustion reciprocating internal combustion engine turbocharger is prepared from a lay-up or molding of carbon-carbon composite materials in a single-piece or two-piece process. When compared to conventional steel or cast iron, the use of carbon-carbon composite materials in a turbine housing unit reduces the overall weight of the engine and reduces the heat energy loss used in the turbo-charging process. This reduction in heat energy loss and weight reduction provides for more efficient engine operation.

  15. Carbon-Carbon Turbocharger Housing Unit for Intermittent Combustion Engines

    NASA Technical Reports Server (NTRS)

    Northam, G. Burton (Inventor); Ransone, Philip O. (Inventor); Rivers, H. Kevin (Inventor)

    1998-01-01

    An improved, lightweight, turbine housing unit for an intermittent combustion reciprocating internal combustion engine turbocharger is prepared from a lay-up or molding of carbon-carbon composite materials in a single-piece or two-piece process. When compared to conventional steel or cast iron, the use of carbon-carbon composite materials in a turbine housing unit reduces the overall weight of the engine and reduces the heat energy loss used in the turbocharging process. This reduction in heat energy loss and weight reduction provides for more efficient engine operation.

  16. Comparative analysis of the life cycle impact assessment of available cement inventories in the EU

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Josa, Alejandro; Aguado, Antonio; Cardim, Arnaldo

    Life cycle impact assessment (LCIA) is one of basic steps in life cycle assessment methodology (LCA). This paper presents a comparative study of the LCIA of different life cycle inventories (LCI) for EU cements. The analysis unit used is the manufacture of 1 kg of cement, from 'cradle to gate'. The impact categories considered are those resulting from the manufacture of cement and include greenhouse effects, acidification, eutrophication and summer and winter smog, amongst others. The results of the study highlighted some inconsistencies in existing inventories. As for the LCIA, the main environmental interventions related to cement manufacture were classifiedmore » and characterised and their effect on different impact categories analysed. Differences observed in evaluation of the impact of cement type were essentially related to their clinker content.« less

  17. Endotoxin removal by radio frequency gas plasma (glow discharge)

    NASA Astrophysics Data System (ADS)

    Poon, Angela

    2011-12-01

    Contaminants remaining on implantable medical devices, even following sterilization, include dangerous fever-causing residues of the outer lipopolysaccharide-rich membranes of Gram-negative bacteria such as the common gut microorganism E. coli. The conventional method for endotoxin removal is by Food & Drug Administration (FDA)-recommended dry-heat depyrogenation at 250°C for at least 45 minutes, an excessively time-consuming high-temperature technique not suitable for low-melting or heat-distortable biomaterials. This investigation evaluated the mechanism by which E. coli endotoxin contamination can be eliminated from surfaces during ambient temperature single 3-minute to cumulative 15-minute exposures to radio-frequency glow discharge (RFGD)-generated residual room air plasmas activated at 0.1-0.2 torr in a 35MHz electrodeless chamber. The main analytical technique for retained pyrogenic bio-activity was the Kinetic Chromogenic Limulus Amebocyte Lysate (LAL) Assay, sufficiently sensitive to document compliance with FDA-required Endotoxin Unit (EU) titers less than 20 EU per medical device by optical detection of enzymatic color development corresponding to < 0.5 EU/ml in sterile water extracts of each device. The main analytical technique for identification of chemical compositions, amounts, and changes during sequential reference Endotoxin additions and subsequent RFGD-treatment removals from infrared (IR)-transparent germanium (Ge) prisms was Multiple Attenuated Internal Reflection (MAIR) infrared spectroscopy sensitive to even monolayer amounts of retained bio-contaminant. KimaxRTM 60 mm x 15 mm and 50mm x 15mm laboratory glass dishes and germanium internal reflection prisms were inoculated with E. coli bacterial endotoxin water suspensions at increments of 0.005, 0.05, 0.5, and 5 EU, and characterized by MAIR-IR spectroscopy of the dried residues on the Ge prisms and LAL Assay of sterile water extracts from both glass and Ge specimens. The Ge prism MAIR-IR measurements were repeated after employing 3-minute RFGD treatments sequentially for more than 10 cycles to observe removal of deposited matter that correlated with diminished EU titers. The results showed that 5 cycles, for a total exposure time of 15 minutes to low-temperature gas plasma, was sufficient to reduce endotoxin titers to below 0.05 EU/ml, and correlated with concurrent reduction of major endotoxin reference standard absorption bands at 3391 cm-1, 2887 cm-1, 1646 cm -1 1342 cm-1, and 1103 cm-1 to less than 0.05 Absorbance Units. Band depletion varied from 15% to 40% per 3-minute cycle of RFGD exposure, based on peak-to-peak analyses. In some cases, 100% of all applied biomass was removed within 5 sequential 3-minute RFGD cycles. The lipid ester absorption band expected at 1725 cm-1 was not detectable until after the first RFGD cycle, suggesting an unmasking of the actual bacterial endotoxin membrane induced within the gas plasma environment. Future work must determine the applicability of this low-temperature, quick depyrogenation process to medical devices of more complicated geometry than the flat surfaces tested here.

  18. The Economics of Biosimilars

    PubMed Central

    Blackstone, Erwin A.; Joseph, P. Fuhr

    2013-01-01

    Background The high cost of pharmaceuticals, especially biologics, has become an important issue in the battle to control healthcare costs. The Hatch-Waxman Act encourages generic competition but still provides incentives for pioneers to develop new drugs. The Biologics Price Competition and Innovation Act is intended to do the same for biologics and biosimilars. Objective To examine information related to biosimilars to determine their potential impact on competition in the biologic market. Method Using information concerning the European Union (EU) and the pharmaceutical industry, this article reviews and analyzes the experience of biosimilars in the EU, as well as the obstacles and opportunities that biosimilars face in the United States. Much of the analysis is based on examining current trends in biologic drugs and the potential implications on the future of biosimilars. Discussion This article reviews the mixed success of biosimilars in the EU and the implications for the United States. Because biologics are produced from living organisms, manufacturing issues are more important than in the chemical drug market. The barriers to biosimilar entry into the marketplace are much more difficult to overcome than challenges generic manufacturers typically face and are similar to obstacles specialty injectable producers encounter. The competitive responses by pioneers are also likely to be more important. The capital costs and risk issues with biosimilars make alliances and partnering arrangements very likely. Biosimilars often enter emerging markets, where the barriers to entry are easier to overcome. Nevertheless, the United States represents the greatest opportunity for biosimilar producers, in part because it is the largest biologics market and has high prices for biologics. As the United States enters the biosimilar market, the pharmaceutical industry is likely to grow at an accelerated pace. Automatic substitution is likely to be slow to develop, because of safety and quality concerns. The beneficial impact of biosimilars is likely to take a long time to be realized and to be fraught with more difficulties than was the case for small-molecule generics. Conclusion Various factors, such as safety, pricing, manufacturing, entry barriers, physician acceptance, and marketing, will make the biosimilar market develop different from the generic market. The high cost to enter the market and the size of the biologic drug market make entry attractive but risky. PMID:24991376

  19. Semiconductor Chemical Reactor Engineering and Photovoltaic Unit Operations.

    ERIC Educational Resources Information Center

    Russell, T. W. F.

    1985-01-01

    Discusses the nature of semiconductor chemical reactor engineering, illustrating the application of this engineering with research in physical vapor deposition of cadmium sulfide at both the laboratory and unit operations scale and chemical vapor deposition of amorphous silicon at the laboratory scale. (JN)

  20. 4. INTERIOR OF ENGINE ROOM, CONTAINING UNITEDTOD TWINTANDEM ENGINE, FOR ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. INTERIOR OF ENGINE ROOM, CONTAINING UNITED-TOD TWIN-TANDEM ENGINE, FOR 40" BLOOMING MILL; AS SEEN FROM THE UPPER LEVEL BRIDGE CRANE, THIS ENGINE WAS THE DIRECT DRIVE TO THE 40" BLOOMING MILL LOCATED IN THE ADJACENT ROOM TO THE LEFT. THE UNITED-TOD ENGINE, A TWIN TANDEM COMPOUND STEAM ENGINE, WAS RATED AT 20,000 MP. IN 1946 NEW HIGH PRESSURE CYLINDERS WERE INSTALLED AND THE ENGINE RAN ON 200 PSI STEAM, WITH A 44"X76"X60" STROKE, TO A BUILT-UP COUNTER-BALANCED CENTER CRANK. - Republic Iron & Steel Company, Youngstown Works, Blooming Mill & Blooming Mill Engines, North of Poland Avenue, Youngstown, Mahoning County, OH

  1. Zircon Trace Element Contents and Refined U-Pb Crystallization Ages for the Tatoosh Pluton, Mount Rainier National Park, Washington Cascades

    NASA Astrophysics Data System (ADS)

    Bacon, C. R.; Du Bray, E. A.; John, D. A.; Mazdab, F. K.; Wooden, J. L.

    2008-12-01

    The 7x12 km Tatoosh pluton south of Mount Rainier consists of 4 petrographic/compositional phases, here termed Nisqually, Reflection, Pyramid, and Stevens, that intrude Tertiary volcanic and sedimentary wall and roof rocks; contacts between the 4 intrusive units are rarely exposed. We used the USGS-Stanford SHRIMP- RG to analyze, in a continuous session, zircons from each of 6 quartz monzodiorite (qmd), quartz monzonite (qm), or granodiorite (grd) samples for 206Pb/238U ages and, concurrently, U, Th, Hf, and REE concentrations. A round-robin procedure yielded statistically robust geochronological results. Ages that we reported previously (FM07) were compromised by instrument instability and by calibration differences between analytical sessions. Between 11 and 31 new analyses of zircons from each sample were evaluated using the TuffZirc and Umix Ages routines of Isoplot 3.41 (Ludwig, 2003). TuffZirc solidification ages for the intrusions are: Nisqually grd (Paradise Valley; 65.4% SiO2) 17.29 +0.37/-0.24 Ma, Nisqually grd (Christine Falls; 66.4%) 17.70 +0.30/-0.16 Ma, Reflection qm (Pinnacle Peak trail; 66.6%) 18.38 +0.45/-0.28 Ma, Pyramid qmd (58.5%) 18.58 +0.20/-0.15 Ma, Stevens grd (Stevens Canyon; 67.8%) 19.15 +0.15/-0.12 Ma, and Stevens grd (south of Louise Lake; 69.3%) 19.20 +0.31/-0.26 Ma (U-Th initial-disequilibrium corrected, ±2σ). Precision of the U-Pb data limits rigorous identification of antecrysts to those with ages ~1 Myr > solidification ages. Antecryst ages that produce subsidiary modes in relative probability diagrams for the two Stevens samples give weighted mean values of 20.18 ±0.26 Ma and 20.07 ±0.18 Ma. Wide ranges in trace element concentrations and ratios indicate that many analyzed zircons grew in highly fractionated residual liquids in high-crystallinity environments. Concentrations of Th and U in Tatoosh zircons vary by two orders of magnitude, cores tend to have higher Th, U, and Th/U than rims, and overgrowths that fill reentrants have high U contents and low Th/U ratios. Chondrite-normalized REE patterns have familiar convex-up shapes with positive Ce and negative Eu anomalies: LaN = 0.03-6 (10 values >6 may reflect inclusions), YbN = 380-33,900, Ce/Ce* = 0.7-505, and Eu/Eu* = 0.06-1.25. Slopes of REE patterns increase subtly in the order Reflection < Pyramid ≤ Nisqually < Stevens. Fractionation of plagioclase + pyroxene and(or) amphibole + Fe-Ti oxide + apatite + zircon should produce relative-LREE- enriched successive liquids. Observed marginally steeper REE patterns (greater positive slopes) for rims, lower REE concentrations, and lower Th/U ratios may reflect co-precipitation of allanite ± thorite. Two parallel arrays in Eu/Eu* versus Hf, in which Eu/Eu* decreases as Hf increases, are consistent with growth of higher-Hf, lower-Eu/Eu* zircon from more evolved melts; separate arrays imply Nisqually and Pyramid + Reflection intrusions. Zircon Eu/Eu* and Hf in the Stevens granodiorite define one high-Eu/Eu* field and another similar to that for Pyramid and Reflection samples that imply more than one parental magma. The zircon ages indicate solidification in three episodes: Stevens ~19.2 Ma, Pyramid + Reflection ~18.5 Ma, and Nisqually ~17.5 Ma. An ~20.1 Ma stage is represented by antecrysts in Stevens samples. The source(s) of the pluton were active for at least ~2.7 Myr and major crystallization episodes were separated by intervals of 0.7-1.0 Myr.

  2. Control of Eu Luminescence Centers by Codoping of Mg and Si into Eu-Doped GaN

    NASA Astrophysics Data System (ADS)

    Lee, Dong-gun; Wakamatsu, Ryuta; Koizumi, Atsushi; Terai, Yoshikazu; Fujiwara, Yasufumi

    2013-08-01

    The effects of Mg and Si codoping on Eu luminescence properties have been investigated in Eu-doped GaN (GaN:Eu). The Mg codoping into GaN:Eu produced novel luminescence centers consisting of Eu and Mg, and increased photoluminescence (PL) intensity in Eu,Mg-codoped GaN (GaN:Eu,Mg). However, this increased PL intensity was quenched by thermal annealing in N2 ambient, which is due to activation of Mg acceptors. In GaN:Eu,Mg codoped additionally with Si (GaN:Eu,Mg,Si), on the other hand, the Eu-Mg centers disappeared, while an additional luminescence center appeared. Furthermore, the additional luminescence center showed no quenching under N2 annealing because Si donors compensated for the Mg acceptors in GaN. Thermal quenching of the luminescence center was also approximately half of that in GaN:Eu. These results indicate that the codoping with additional impurities in GaN:Eu is a powerful technique to control Eu luminescence centers for realization of improved device performance in red light-emitting diodes using GaN:Eu.

  3. Purity and the dangers of regenerative medicine: regulatory innovation of human tissue-engineered technology.

    PubMed

    Faulkner, Alex; Kent, Julie; Geesink, Ingrid; FitzPatrick, David

    2006-11-01

    This paper examines the development of innovation in human tissue technologies as a form of regenerative medicine, firstly by applying 'pollution ideas' to contemporary trends in its risk regulation and to the processes of regulatory policy formation, and secondly by analysing the classificatory processes deployed in regulatory policy. The analysis draws upon data from fieldwork and documentary materials with a focus on the UK and EU (2002-05) and explores four arenas: governance and regulatory policy; commercialisation and the market; 'evidentiality' manifest in evidence-based policy; and publics' and technology users' values and ethics. The analysis suggests that there is a trend toward 'purification' across these arenas, both material and socio-political. A common process of partitioning is found in stakeholders' attempts to define a clear terrain, which the field of tissue-engineered technology might occupy. We conclude that pollution ideas and partitioning processes are useful in understanding regulatory ordering and innovation in the emerging technological zone of human tissue engineering.

  4. 3. ELEVATIONS, ADDITION TO POWER HOUSE. United Engineering Company Ltd., ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. ELEVATIONS, ADDITION TO POWER HOUSE. United Engineering Company Ltd., Alameda Shipyard. John Hudspeth, architect, foot of Main Street, Alameda, California. Sheet 4. Plan no. 10,548. Scale 1/4 inch to the foot, elevations, and one inch to the foot, sections and details. April 30, 1945, last revised 6/19/45. pencil on vellum - United Engineering Company Shipyard, Boiler House, 2900 Main Street, Alameda, Alameda County, CA

  5. 14. DREDGING MAP. United Engineering Company Ltd., Alameda Shipyard. Ship ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. DREDGING MAP. United Engineering Company Ltd., Alameda Shipyard. Ship repair facilities dredging map. No architect noted. Drawn by "J.H." (John Hudspeth?). Sheet 1. Plan no. 10,529. Scale one inch to 50 feet. September 22, 1943. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 18, 1943. blueprint - United Engineering Company Shipyard, 2900 Main Street, Alameda, Alameda County, CA

  6. ALTERATIONS AND ADDITIONS TO THE GATE HOUSE, United Engineering Company ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    ALTERATIONS AND ADDITIONS TO THE GATE HOUSE, United Engineering Company Ltd., Alameda Shipyard. Plan, elevations, and details of expanded structure. No architect noted. Drawn by "J.B.H." (John Hudspeth?). Sheet 2 of 2. Plan no. 10,504. Scale 1/4 inch to the foot. November 28, 1942, last revised 5/5/45. pencil on vellum - United Engineering Company Shipyard, Gate House, 2900 Main Street, Alameda, Alameda County, CA

  7. Controlled synthesis and novel photoluminescence properties of BaTiO{sub 3}:Eu{sup 3+}/Eu{sup 2+} nanocrystals

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Feng, Li; Li, Ying; Wang, Guofeng, E-mail: wanggf75@gmail.com

    2015-01-15

    Highlights: • Tetragonal phase BaTiO{sub 3}:Eu nanocrystals were successfully synthesized using a hydrothermal method. • Under 398 nm excitation, the emissions from Eu{sup 2+} and Eu{sup 3+} ions were observed. • The emission band of Eu{sup 2+} from BaTiO{sub 3}:Eu was observed to broaden with increasing Eu concentration. - Abstract: Tetragonal phase BaTiO{sub 3}:Eu nanocrystals were successfully synthesized using a hydrothermal method and a subsequent calcination treatment. The structures and morphologies of nanocrystals were characterized by X-ray diffraction, Raman spectroscopy, transmission electron microscopy, and scanning electron microscopy. The photoluminescence properties of BaTiO{sub 3}:Eu were investigated in detail. Under 398 nmmore » excitation, the emissions from Eu{sup 2+} and Eu{sup 3+} ions were observed, indicating that Eu{sup 2+} and Eu{sup 3+} ions coexisted in BaTiO{sub 3}:Eu nanocrystals. Especially, the emission band of Eu{sup 2+} from BaTiO{sub 3}:Eu was observed to broaden with increasing Eu concentration. When the Eu concentration was 0.5 mol%, the {sup 5}D{sub 0} → {sup 7}F{sub 0} and {sup 5}D{sub 1} → {sup 7}F{sub 0} emissions were observed. In addition, under 537 nm excitation, the emission intensity increased with increasing Eu concentration.« less

  8. A Strategy to enhance Eu3+ emission from LiYF4:Eu nanophosphors and green-to-orange multicolor tunable, transparent nanophosphor-polymer composites

    PubMed Central

    Kim, Su Yeon; Won, Yu-Ho; Jang, Ho Seong

    2015-01-01

    LiYF4:Eu nanophosphors with a single tetragonal phase are synthesized, and various strategies to enhance the Eu3+ emission from the nanophosphors are investigated. The optimized Eu3+ concentration is 35 mol%, and the red emission peaks due to the 5D0 →7FJ (J = 1 and 2) transitions of Eu3+ ions are further enhanced by energy transfer from a sensitizer pair of Ce3+ and Tb3+. The triple doping of Ce, Tb, and Eu into the LiYF4 host more effectively enhances the Eu3+ emission than the core/shell strategies of LiYF4:Eu(35%)/LiYF4:Ce(15%), Tb(15%) and LiYF4:Ce(15%), Tb(15%)/LiYF4:Eu(35%) architectures. Efficient energy transfer from Ce3+ to Eu3+ through Tb3+ results in three times higher Eu3+ emission intensity from LiYF4:Ce(15%), Tb(15%), Eu(1%) nanophosphors compared with LiYF4:Eu(35%), which contains the optimized Eu3+ concentration. Owing to the energy transfer of Ce3+ → Tb3+ and Ce3+ → Tb3+ → Eu3+, intense green and red emission peaks are observed from LiYF4:Ce(13%), Tb(14%), Eu(1-5%) (LiYF4:Ce, Tb, Eu) nanophosphors, and the intensity ratio of green to red emission is controlled by adjusting the Eu3+ concentration. With increasing Eu3+ concentration, the LiYF4:Ce, Tb, Eu nanophosphors exhibit multicolor emission from green to orange. In addition, the successful incorporation of LiYF4:Ce, Tb, Eu nanophosphors into polydimethylsiloxane (PDMS) facilitates the preparation of highly transparent nanophosphor-PDMS composites that present excellent multicolor tunability. PMID:25597900

  9. Using Teaching Portfolios to Revise Curriculum and Explore Instructional Practices of Technology and Engineering Education Teachers

    ERIC Educational Resources Information Center

    Lomask, Michal; Crismond, David; Hacker, Michael

    2018-01-01

    This paper reports on the use of teaching portfolios to assist in curriculum revision and the exploration of instructional practices used by middle school technology and engineering education teachers. Two new middle school technology and engineering education units were developed through the Engineering for All (EfA) project. One EfA unit focused…

  10. Engineering Encounters: The Cat in the Hat Builds Satellites. A Unit Promoting Scientific Literacy and the Engineering Design Process

    ERIC Educational Resources Information Center

    Rehmat, Abeera P.; Owens, Marissa C.

    2016-01-01

    This column presents ideas and techniques to enhance your science teaching. This month's issue shares information about a unit promoting scientific literacy and the engineering design process. The integration of engineering with scientific practices in K-12 education can promote creativity, hands-on learning, and an improvement in students'…

  11. Elimination of trachoma as a public health problem in Ghana: Providing evidence through a pre-validation survey

    PubMed Central

    Debrah, Oscar; Mensah, Ernest O.; Senyonjo, Laura; de Souza, Dziedzom K.; Hervie, Tei E.; Agyemang, David; Bakajika, Didier; Marfo, Benjamin; Ahorsu, Felix; Wanye, Seth; Bailey, Robin; Koroma, Joseph B.; Aboe, Agatha

    2017-01-01

    Background In order to achieve elimination of trachoma, a country needs to demonstrate that the elimination prevalence thresholds have been achieved and then sustained for at least a two-year period. Ghana achieved the thresholds in 2008, and since 2011 has been implementing its trachoma surveillance strategy, which includes community and school screening for signs of follicular trachoma and trichiasis, in trachoma-endemic districts. In 2015–2016, the country conducted a district level population-based survey to validate elimination of trachoma as a public health problem. Methods As per WHO recommendations, a cross-sectional survey, employing a two-stage cluster random sampling methodology, was used across 18 previously trachoma endemic districts (evaluation units (EUs) in the Upper West and Northern Regions of Ghana. In each EU 24 villages were selected based on probability proportional to estimated size. A minimum of 40 households were targeted per village and all eligible residents were examined for clinical signs of trachoma, using the WHO simplified grading system. The number of trichiasis cases unknown to the health system was determined. Household environmental risk factors for trachoma were also assessed. Results Data from 45,660 individuals were examined from 11,099 households across 18 EUs, with 27,398 (60.0%) children aged 1–9 years and 16,610 (36.4%) individuals 15 years and above All EUs had shown to have maintained the WHO elimination threshold for Trachomatous inflammation-Follicular (TF) (<5.0% prevalence) in children aged 1–9 years old. The EU TF prevalence in children aged 1–9 years old ranged from between 0.09% to 1.20%. Only one EU (Yendi 0.36%; 95% CI: 0.0–1.01) failed to meet the WHO TT elimination threshold (< 0.2% prevalence in adults aged 15 and above). The EU prevalence of trichiasis (TT) unknown to the health system in adults aged ≥15 years, ranged from 0.00% to 0.36%. In this EU, the estimated TT backlog is 417 All TT patients identified in the study, as well as through on-going surveillance efforts will require further management. A total of 75.9% (95% CI 72.1–79.3, EU range 29.1–92.6) of households defecated in the open but many households had access to an improved water source 75.9% (95%CI: 71.5–79.8, EU range 47.4–90.1%), with 45.5% (95% CI 41.5–49.7%, EU range 28.4–61.8%) making a round trip of water collection < 30 minutes. Conclusion The findings from this survey indicate elimination thresholds have been maintained in Ghana in 17 of the 18 surveyed EUs. Only one EU, Yendi, did not achieve the TT elimination threshold. A scheduled house-by-house TT case search in this EU coupled with surgery to clear the backlog of cases is necessary in order for Ghana to request validation of elimination of trachoma as a public health problem. PMID:29232708

  12. Fiscal Year 2008 Phased Construction Completion Report for EU Z2-33 in Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bechtel Jacobs

    The Record of Decision for Soil, Buried Waste, and Subsurface Structure Actions in Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee (DOE/OR/01-2161&D2) (Zone 2 ROD) acknowledged that most of the 800 acres in Zone 2 were contaminated, but that sufficient data to confirm the levels of contamination were lacking. The Zone 2 ROD further specified that a sampling strategy for filling the data gaps would be developed. The Remedial Design Report/Remedial Action Work Plan for Zone 2 Soils, Slabs, and Subsurface Structures, East Tennessee Technology Park, Oak Ridge, Tennessee (DOE/OR/01-2224&D3) (Zone 2 RDR/RAWP) defined the sampling strategy as themore » Dynamic Verification Strategy (DVS), generally following the approach used for characterization of the Zone 1 exposure units (EUs). The Zone 2 ROD divided the Zone 2 area into seven geographic areas and 44 EUs. To facilitate the data quality objectives (DQOs) of the DVS process, the Zone 2 RDR/RAWP regrouped the 44 EUs into 12 DQO scoping EU groups. These groups facilitated the DQO process by placing similar facilities and their support facilities together and allowing identification of data gaps. The EU groups were no longer pertinent after DQO planning was completed and characterization was conducted as areas became accessible. As the opportunity to complete characterization became available, the planned DVS program and remedial actions (RAs) were completed for EU Z2-33. Remedial action was also performed at two additional areas in adjacent EU Z2-42 because of their close proximity and similar nature to a small surface soil RA in EU Z2-33. Remedial actions for building slabs performed in EU Z2-33 during fiscal year (FY) 2007 were reported in the Fiscal Year 2007 Phased Construction Completion Report for the Zone 2 Soils, Slabs, and Subsurface Structures at East Tennessee Technology Park, Oak Ridge, Tennessee (DOE/OR/01-2723&D1). Recommended RAs for EU Z2-42 were described in the Fiscal Year 2006 Phased Construction Completion Report for the Zone 2 Soils, Slabs, and Subsurface Structures at East Tennessee Technology Park, Oak Ridge, Tennessee (DOE/OR/01-2317&D2). Remedial actions performed in the Balance of Site (BOS) Laboratory Area of EU Z2-33 and two small areas in EU Z2-42 are described in Sects. 5 through 10 of this Phased Construction Completion Report (PCCR). The purpose of this PCCR is to address the following: (1) Document DVS characterization results for EU Z2-33; (2) Describe and document the risk evaluation and determine if the EU meets the Zone 2 ROD requirements for unrestricted industrial use to 10 ft bgs; (3) Identify additional areas not defined in the Zone 2 ROD that require remediation based on the DVS evaluation results; and (4) Describe RAs performed in the EU Z2-33 BOS Laboratory Area and two small areas in EU Z2-42. Approximately 18 acres in EU Z2-33 are addressed in this PCCR. Based on the results of the DVS evaluation and RAs performed, all 18 acres are recommended for unrestricted industrial use to 10 ft bgs. Three Federal Facility Agreement sites are addressed and recommended for no further action within this acreage, including: (1) K-1004-L Recirculating Cooling Water Lines Leak Sites; (2) K-1044 Heavy Equipment Repair Shop; and (3) K-1015-A Laundry Pit. Remedial actions for EU Z2-33 were developed in response to DVS characterization results described in the EU Z2-33 Technical Memorandum (Appendix A) and to support reindustrialization of the East Tennessee Technology Park as a commercial industrial park. Remediation criteria were designed for the protection of a future industrial worker who normally would not have the potential for exposure to soil below 10ft bgs. Accordingly, the Zone 2 ROD required land use controls to prevent disturbance of soils below 10 ft deep and to restrict future land use to industrial/commercial activities. In response to stakeholder comments, the U.S. Department of Energy agreed to re-evaluate the need for such land use restrictions. This document includes a screening evaluation to determine the likelihood of land use controls in EU Z2-33 being modified to: (1) eliminate the restriction on disturbance of soils below 10 ft bgs where data indicate the absence of residual contamination at any depth that would result in an unacceptable risk to the future industrial worker, and (2) permit alternative land uses that would be protective of future site occupants. Results of this screening evaluation indicate a low probability that restrictions on disturbing soil below 10 ft bgs could be safely eliminated for EU Z2-33. A qualitative screening evaluation considered the likelihood of unrestricted land use being protective of future site occupants. Based on this qualitative assessment, all 18 acres addressed in this PCCR were assigned a low probability for consideration of release for unrestricted land use.« less

  13. Study of Eu{sup 3+} → Eu{sup 2+} reduction in BaAl{sub 2}O{sub 4}:Eu prepared in different gas atmospheres

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rezende, Marcos V. dos S., E-mail: mvsrezende@gmail.com; Valerio, Mário E.G.; Jackson, Robert A.

    2015-01-15

    Highlights: • The effect of different gas atmospheres on the Eu reduction process was studied. • The Eu reduction was monitored analyzing XANES region at the Eu L{sub III}-edge. • Hydrogen reducing agent are the most appropriate gas for Eu{sup 2+} stabilization. • Only a part of the Eu ions can be stabilized in the divalent state. • A model of Eu reduction process is proposed. - Abstract: The effect of different gas atmospheres such as H{sub 2}(g), synthetic air, carbon monoxide (CO) and nitrogen (N{sub 2}) on the Eu{sup 3+} → Eu{sup 2+} reduction process during the synthesis ofmore » Eu-doped BaAl{sub 2}O{sub 4} was studied using synchrotron radiation. The Eu{sup 3+} → Eu{sup 2+} reduction was monitored analyzing XANES region when the sample are excited at the Eu L{sub III}-edge. The results show that the hydrogen reducing agent are the most appropriate gas for Eu{sup 2+} stabilization in BaAl{sub 2}O{sub 4} and that only a part of the Eu ions can be stabilized in the divalent state. A model of Eu reduction process, based on the incorporation of charge compensation defects, is proposed.« less

  14. Sustainable transportation : technology, engineering, and science : summer camp instructor’s guide.

    DOT National Transportation Integrated Search

    2014-03-01

    This document reproduces the instructors guide for a ten day transportation engineering summer camp that was held at the University of Idaho in July 2013. The instructors guide is split into three units: Unit 1: Vehicle Technology, Unit 2: Traf...

  15. Sustainable transportation : technology, engineering, and science - summer camp instructor's guide.

    DOT National Transportation Integrated Search

    2014-03-01

    This document reproduces the instructors guide for a ten day transportation engineering summer camp that was held at the University of Idaho in July 2013. The instructors guide is split into three units: Unit 1: Vehicle Technology, Unit 2: Traf...

  16. 15th Anniversary of the Molecular Techniques Unit at the Department of Forensic Medicine at Wroclaw Medical University.

    PubMed

    Pluta, Dominika; Tokarski, Miron; Karpiewska, Anna; Dobosz, Tadeusz

    2017-01-01

    Molecular Techniques Unit at the Department of Forensic Medicine, Wroclaw Medical University has been operating since December 2003. Soon it will be 15 years since its establishment. This anniversary become an inspiration to write down the story of this institution whose origins illustrate the immense changes that have taken place in forensic genetics. The aim of our work was also to consolidate the professional achievements of Professor Tadeusz Dobosz, chief of the Unit, one of the pioneers of introducing DNA testing technology into Polish forensic medicine. The most important achievements of the Unit include participation in two EU research projects, the development of a non-destructive method of extraction of genetic material, research in field of gene therapy and certification of the Laboratory of the Molecular Techniques Unit by the Polish Accreditation Center (PCA) confirming compliance with the requirements of the PN-EN ISO/IEC 17025:2005 standard.

  17. Current level of compliance with EU bulk tank SCC standards and proposed US standards based on data from four Federal Milk Marketing Orders

    USDA-ARS?s Scientific Manuscript database

    Milk quality in the United States is evaluated annually using bulk-tank somatic cell count (BTSCC) data provided by 4 of the Nation's 10 Federal Milk Marketing Orders. The data represents more than 30,000 producers and 50% of milk produced in the US. The reported BTSCC is used for regulatory purpose...

  18. European Education Reform and Its Impact on Curriculum and Admissions: Implications of the Bologna Process on United States Education

    ERIC Educational Resources Information Center

    Roper, Steven D.

    2007-01-01

    This article explores the European-wide educational reform known as the Bologna Process in order to provide an understanding of the methodology that will be used by European countries to assess course credit hours as well as degree programs. The Bologna Process is culmination of years of educational reform within the European Union (EU) and more…

  19. International Crisis Information Network

    DTIC Science & Technology

    2006-12-01

    AU African Union CA Civil Affairs (Specifically United States Army) CDHAM Center for Disaster and Humanitarian Assistance Medicine CEMAC Economic...Department of Defense DODD Department of Defense Directive ECOWAS Economic Community of West African States EU European Union FR First Responder HA...passion, such as rugby fans on Rugby365.com, or music lovers on MP3.com. These people exchange ideas and thoughts about the given passion.”83 The

  20. Polish plant beats the odds to become model EU generator

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Neville, A.

    2009-03-15

    Once a Soviet satellite, Poland is now transforming into a thoroughly modern nation. To support its growing economy, this recent European Union member country is modernizing its power industry. Exemplifying the advances in the Polish electricity generation market is the 460 MW Patnow II power plant - the largest, most efficient (supercritical cycle) and environmentally cleanest lignite-fired unit in the country. 3 photos.

  1. Mapping and monitoring High Nature Value farmlands: challenges in European landscapes.

    PubMed

    Lomba, Angela; Guerra, Carlos; Alonso, Joaquim; Honrado, João Pradinho; Jongman, Rob; McCracken, David

    2014-10-01

    The importance of low intensity farming for the conservation of biodiversity throughout Europe was acknowledged early in the 1990s when the concept of 'High Nature Value farmlands' (HNVf) was devised. HNVf has subsequently been given high priority within the EU Rural Development Programme. This puts a requirement on each EU Member State not only to identify the extent and condition of HNVf within their borders but also to track trends in HNVf over time. However, the diversity of rural landscapes across the EU, the scarcity of (adequate) datasets on biodiversity, land cover and land use, and the lack of a common methodology for HNVf mapping currently represent obstacles to the implementation of the HNVf concept across Europe. This manuscript provides an overview of the characteristics of HNVf across Europe together with a description of the development of the HNVf concept. Current methodological approaches for the identification and mapping of HNVf across EU-27 and Switzerland are then reviewed, the main limitations of these approaches highlighted and recommendations made as to how the identification, mapping and reporting of HNVf state and trends across Europe can potentially be improved and harmonised. In particular, we propose a new framework that is built on the need for strategic HNVf monitoring based on a hierarchical, bottom-up structure of assessment units, coincident with the EU levels of political decision and devised indicators, and which is linked strongly to a collaborative European network that can provide the integration and exchange of data from different sources and scales under common standards. Such an approach is essential if the scale of the issues facing HNVf landscapes are to be identified and monitored properly at the European level. This would then allow relevant agri-environmental measures to be developed, implemented and evaluated at the scale(s) required to maintain the habitats and species of high nature conservation value that are intimately associated with those landscapes. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Classification of the European Union member states according to the relative level of sustainable development.

    PubMed

    Anna, Bluszcz

    Nowadays methods of measurement and assessment of the level of sustained development at the international, national and regional level are a current research problem, which requires multi-dimensional analysis. The relative assessment of the sustainability level of the European Union member states and the comparative analysis of the position of Poland relative to other countries was the aim of the conducted studies in the article. EU member states were treated as objects in the multi-dimensional space. Dimensions of space were specified by ten diagnostic variables describing the sustainability level of UE countries in three dimensions, i.e., social, economic and environmental. Because the compiled statistical data were expressed in different units of measure, taxonomic methods were used for building an aggregated measure to assess the level of sustainable development of EU member states, which through normalisation of variables enabled the comparative analysis between countries. Methodology of studies consisted of eight stages, which included, among others: defining data matrices, calculating the variability coefficient for all variables, which variability coefficient was under 10 %, division of variables into stimulants and destimulants, selection of the method of variable normalisation, developing matrices of normalised data, selection of the formula and calculating the aggregated indicator of the relative level of sustainable development of the EU countries, calculating partial development indicators for three studies dimensions: social, economic and environmental and the classification of the EU countries according to the relative level of sustainable development. Statistical date were collected based on the Polish Central Statistical Office publication.

  3. Pressure-induced amorphization and collapse of magnetic order in the type-I clathrate Eu8Ga16Ge30

    NASA Astrophysics Data System (ADS)

    Mardegan, J. R. L.; Fabbris, G.; Veiga, L. S. I.; Adriano, C.; Avila, M. A.; Haskel, D.; Giles, C.

    2013-10-01

    We investigate the low temperature structural and electronic properties of the type-I clathrate Eu8Ga16Ge30 under pressure using x-ray powder diffraction (XRD), x-ray absorption near-edge structure (XANES), and x-ray magnetic circular dichroism (XMCD) techniques. The XRD measurements reveal a transition to an amorphous phase above 18 GPa. Unlike previous reports on other clathrate compounds, no volume collapse is observed prior to the crystalline-amorphous phase transition which takes place when the unit cell volume is reduced to 81% of its ambient pressure value. Fits of the pressure-dependent relative volume to a Murnaghan equation of state yield a bulk modulus B0=65±3 GPa and a pressure derivative B0'=3.3±0.5. The Eu L2-edge XMCD data shows quenching of the magnetic order at a pressure coincident with the crystalline-amorphous phase transition. This information along with the persistence of an Eu2+ valence state observed in the XANES spectra up to the highest pressure point (22 GPa) indicates that the suppression of XMCD intensity is due to the loss of long range magnetic order. When compared with other clathrates, the results point to the importance of guest ion-cage interactions in determining the mechanical stability of the framework structure and the critical pressure for amorphization. Finally, the crystalline structure is not found to recover after pressure release, resulting in an amorphous material that is at least metastable at ambient pressure and temperature.

  4. Trends and predictions to 2020 in breast cancer mortality in Europe.

    PubMed

    Carioli, Greta; Malvezzi, Matteo; Rodriguez, Teresa; Bertuccio, Paola; Negri, Eva; La Vecchia, Carlo

    2017-12-01

    We analyzed trends in mortality from breast cancer in women in 36 European countries and the European Union (EU) over the period 1970-2014, and predicted numbers of deaths and rates to 2020. We derived breast cancer death certification data and population figures from the World Health Organization and Eurostat databases. We obtained 2020 estimates using a joinpoint regression model. Overall, EU breast cancer mortality rates (world standard) declined from 17.9/100,000 in 2002 to 15.2 in 2012. The predicted 2020 rate is 13.4/100,000. The falls were largest in young women (20-49 years, -22% between 2002 and 2012). Within the EU, declines were larger in the United Kingdom (UK) and other northern and western European countries than in most central and eastern Europe. The UK has the second lowest predicted breast cancer mortality rate in 2020 (after Spain), starting from the highest one in 1970. Breast cancer mortality is predicted to rise in Poland, where the predicted 2020 rate is 15.3/100,000. We estimated that about 32,500 breast cancer deaths will be avoided in 2020 in the EU as compared to the peak rate of 1989, and a total of 475,000 breast cancer deaths over the period 1990-2020. The overall favourable breast cancer mortality trends are mainly due to a succession of improvements in the management and treatment of breast cancer, though early diagnosis and screening played a role, too. Improving breast cancer management in central and eastern Europe is a priority. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Electrostatic dust collectors compared to inhalable samplers for measuring endotoxin concentrations in farm homes.

    PubMed

    Kilburg-Basnyat, B; Peters, T M; Perry, S S; Thorne, P S

    2016-10-01

    Paired electrostatic dust collectors (EDCs) and daily, inhalable button samplers (BS) were used concurrently to sample endotoxin in 10 farm homes during 7-day periods in summer and winter. Winter sampling included an optical particle counter (OPC) to measure PM2.5 and PM2.5-10 . Electrostatic dust collectors and BS filters were analyzed for endotoxin using the kinetic chromogenic Limulus amebocyte lysate assay. Optical particle counter particulate matter (PM) data were divided into two PM categories. In summer, geometric mean (geometric standard deviation) endotoxin concentrations were 0.82 EU/m(3) (2.7) measured with the BS and 737 EU/m(2) (1.9) measured with the EDC. Winter values were 0.52 EU/m(3) (3.1) for BS and 538 EU/m(2) (3.0) for EDCs. Seven-day endotoxin values of EDCs were highly correlated with the 7-day BS sampling averages (r = 0.70; P < 0.001). Analysis of variance indicated a 2.4-fold increase in EDC endotoxin concentrations for each unit increase of the ratio of PM2.5 to PM2.5-10 . There was also a significant correlation between BS and EDCs endotoxin concentrations for winter (r = 0.67; P < 0.05) and summer (r = 0.75; P < 0.05). Thus, EDCs sample comparable endotoxin concentrations to BS, making EDCs a feasible, easy to use alternative to BS for endotoxin sampling. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  6. [Better medical devices regulations for better health care: enlightenment for medical devices regulatory reform in China, from experiences of the E.U. and the U.S.A].

    PubMed

    Sun, Qin; Yan, Liang

    2006-01-01

    The expansion of applications of medical devices has attracted the increased attention of government regulatory bodies around the world to the safety and effectiveness of these products. Most developed countries, such as the United States and European Union, have developed well-established regulatory systems for medical devices, which have also consistently been amended to accommodate the changing requirements of safety and the trend of globalization.The current "Regulations for the Supervision and Administration of Medical Device (China)", established in 2000, has brought about great improvements for the safety and effectiveness of products, safeguarding public health. But there are still, at present, a lot of counterfeit and poor quality devices and device-related adverse events for lack of powerful post -market and in-use regulatory controls for products. It is therefore very urgent for the Chinese government to reform its medical device administration and management. This research paper analyses and compares the different requirements and executions of medical devices regulations in the EU, the US and China, to draw some experiences of the EU and US regimes that are very useful to China's regulatory reform. It is suggested that when developing a new scheme of medical devices regulatory reform in China, two prominent aspects have to be considered by policy makers and regulators. Firstly, the global trend of medical devices regulations has to be taken into account. Secondly, the experiences learned from the EU and US systems should be applied to the Chinese regulatory reform in combination with the concrete practice of China.

  7. 40 CFR 86.447-2006 - What provisions apply to motorcycle engines below 50 cc that are certified under the Small SI...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... to recall them under 40 CFR part 86, 90, or 1068. (d) Specific requirements. If you are an engine or... family's total sales in the United States are used in highway motorcycles. This includes engines used in...'s total sales in the United States are highway motorcycles. Show that you meet the engine-sales...

  8. “Working the System”—British American Tobacco's Influence on the European Union Treaty and Its Implications for Policy: An Analysis of Internal Tobacco Industry Documents

    PubMed Central

    Smith, Katherine E.; Fooks, Gary; Collin, Jeff; Weishaar, Heide; Mandal, Sema; Gilmore, Anna B.

    2010-01-01

    Background Impact assessment (IA) of all major European Union (EU) policies is now mandatory. The form of IA used has been criticised for favouring corporate interests by overemphasising economic impacts and failing to adequately assess health impacts. Our study sought to assess how, why, and in what ways corporations, and particularly the tobacco industry, influenced the EU's approach to IA. Methods and Findings In order to identify whether industry played a role in promoting this system of IA within the EU, we analysed internal documents from British American Tobacco (BAT) that were disclosed following a series of litigation cases in the United States. We combined this analysis with one of related literature and interviews with key informants. Our analysis demonstrates that from 1995 onwards BAT actively worked with other corporate actors to successfully promote a business-oriented form of IA that favoured large corporations. It appears that BAT favoured this form of IA because it could advance the company's European interests by establishing ground rules for policymaking that would: (i) provide an economic framework for evaluating all policy decisions, implicitly prioritising costs to businesses; (ii) secure early corporate involvement in policy discussions; (iii) bestow the corporate sector with a long-term advantage over other actors by increasing policymakers' dependence on information they supplied; and (iv) provide businesses with a persuasive means of challenging potential and existing legislation. The data reveal that an ensuing lobbying campaign, largely driven by BAT, helped secure binding changes to the EU Treaty via the Treaty of Amsterdam that required EU policymakers to minimise legislative burdens on businesses. Efforts subsequently focused on ensuring that these Treaty changes were translated into the application of a business orientated form of IA (cost–benefit analysis [CBA]) within EU policymaking procedures. Both the tobacco and chemical industries have since employed IA in apparent attempts to undermine key aspects of European policies designed to protect public health. Conclusions Our findings suggest that BAT and its corporate allies have fundamentally altered the way in which all EU policy is made by making a business-oriented form of IA mandatory. This increases the likelihood that the EU will produce policies that advance the interests of major corporations, including those that produce products damaging to health, rather than in the interests of its citizens. Given that the public health community, focusing on health IA, has largely welcomed the increasing policy interest in IA, this suggests that urgent consideration is required of the ways in which IA can be employed to undermine, as well as support, effective public health policies. Please see later in the article for the Editors' Summary PMID:20084098

  9. "Working the system"--British American tobacco's influence on the European union treaty and its implications for policy: an analysis of internal tobacco industry documents.

    PubMed

    Smith, Katherine E; Fooks, Gary; Collin, Jeff; Weishaar, Heide; Mandal, Sema; Gilmore, Anna B

    2010-01-12

    Impact assessment (IA) of all major European Union (EU) policies is now mandatory. The form of IA used has been criticised for favouring corporate interests by overemphasising economic impacts and failing to adequately assess health impacts. Our study sought to assess how, why, and in what ways corporations, and particularly the tobacco industry, influenced the EU's approach to IA. In order to identify whether industry played a role in promoting this system of IA within the EU, we analysed internal documents from British American Tobacco (BAT) that were disclosed following a series of litigation cases in the United States. We combined this analysis with one of related literature and interviews with key informants. Our analysis demonstrates that from 1995 onwards BAT actively worked with other corporate actors to successfully promote a business-oriented form of IA that favoured large corporations. It appears that BAT favoured this form of IA because it could advance the company's European interests by establishing ground rules for policymaking that would: (i) provide an economic framework for evaluating all policy decisions, implicitly prioritising costs to businesses; (ii) secure early corporate involvement in policy discussions; (iii) bestow the corporate sector with a long-term advantage over other actors by increasing policymakers' dependence on information they supplied; and (iv) provide businesses with a persuasive means of challenging potential and existing legislation. The data reveal that an ensuing lobbying campaign, largely driven by BAT, helped secure binding changes to the EU Treaty via the Treaty of Amsterdam that required EU policymakers to minimise legislative burdens on businesses. Efforts subsequently focused on ensuring that these Treaty changes were translated into the application of a business orientated form of IA (cost-benefit analysis [CBA]) within EU policymaking procedures. Both the tobacco and chemical industries have since employed IA in apparent attempts to undermine key aspects of European policies designed to protect public health. Our findings suggest that BAT and its corporate allies have fundamentally altered the way in which all EU policy is made by making a business-oriented form of IA mandatory. This increases the likelihood that the EU will produce policies that advance the interests of major corporations, including those that produce products damaging to health, rather than in the interests of its citizens. Given that the public health community, focusing on health IA, has largely welcomed the increasing policy interest in IA, this suggests that urgent consideration is required of the ways in which IA can be employed to undermine, as well as support, effective public health policies.

  10. Engineering Industry Training Board (EITB) Foundation Training. Unit 1.

    ERIC Educational Resources Information Center

    Engineering Industry Training Board, London (England).

    This instructional unit deals with broadly based appreciation training in a range of skills that are appropriate to a wide sector of occupations, including engineering drawing, engineering materials, bench fitting, sheet metal work, turning, milling, welding, and electricity/electronics. The materials presented are intended for instructors and…

  11. Engineering Industry Training Board (EITB) Foundation Training. Unit 2.

    ERIC Educational Resources Information Center

    Engineering Industry Training Board, London (England).

    This instructional unit deals with broadly based appreciation training in a range of skills that are appropriate to a wide sector of occupations, including safety, engineering drawing, engineering materials, bench fitting, sheet metal work, turning, milling, welding, and electricity/electronics. The materials presented are intended for instructors…

  12. Preparation, characterization and application of EVA film containing Eu3+ complex with 1-tridecanecarboxylic acid ligand

    NASA Astrophysics Data System (ADS)

    Dong, Jin; Lin, Baoping

    2017-11-01

    In this study, on the basis of complex Eu(DBM)3Phen which was widely applied in polymer matrices, quaternary complex Eu(DBM)2Phen(TA) was synthesized by the introduction of 1-tridecanecarboxylic acid (TA). XRD analyses show that Eu(DBM)2Phen(TA) inclines to amorphization compared with Eu(DBM)3Phen which is crystal. Ethylene-vinyl acetate (EVA) film doped with Eu(DBM)2Phen(TA) was prepared by casting method. SEM and AFM analyses show that the compatibility of Eu(DBM)2Phen(TA) with EVA is better than that of Eu(DBM)3Phen with EVA. Under the same addition amount of Eu3+ complexes, visible light transmittance of Eu(DBM)2Phen(TA)/EVA film is obviously greater than that of Eu(DBM)3Phen/EVA film, and the fluorescence intensity of Eu(DBM)2Phen(TA)/EVA film is only slightly lower than that of Eu(DBM)3Phen/EVA film. With the optimum addition amount of Eu3+ complexes, the energy conversion efficiency of the polycrystalline silicon solar cell coated with Eu(DBM)2Phen(TA)/EVA film is improved to 12.14%, and in comparison, that of the solar cell coated with Eu(DBM)3Phen/EVA film is only 11.98%. Hence Eu(DBM)2Phen(TA)/EVA film has a potential prospect as luminescent down-shifting material.

  13. A Mixing Theory for the Interaction between Dissipative Flows and Nearly-Isentropic Streams

    DTIC Science & Technology

    1952-01-15

    mTVEfOBEE? "- - AEROmUT-IG-AL ENGINEERING i^ORAjPORY i January 15j t--:l A- • *-,- ß» -*- •AbiMÖWEEEGEMSHT - a "I- " Es A- major portion...incident oblique shock, airfoil -chord -_- _ ’ - . - - •airf oil thickness at: -trailing edge •t v:il -:na Es : EeynöiJidG number,. &;^e...von Karman momentum integral for the. dissipatiVe flow region,, where.;, however> this internal flow is treated, as quäai- Que ."uiU4euBi!oncUt

  14. Modelling and optimization of rotary parking system

    NASA Astrophysics Data System (ADS)

    Skrzyniowski, A.

    2016-09-01

    The increasing number of vehicles in cities is a cause of traffic congestion which interrupts the smooth traffic flow. The established EU policy underlines the importance of restoring spaces for pedestrian traffic and public communication. The overall vehicle parking process in some parts of a city takes so much time that it has a negative impact on the environment. This article presents different kinds of solution with special focus on the rotary parking system (PO). This article is based on a project realized at the Faculty of Mechanical Engineering of Cracow University of Technology.

  15. Installation Restoration Program. Phase 2. Confirmation/Quantification Stage 1 for Pease Air Force Base, New Hampshire. Volume 1.

    DTIC Science & Technology

    1987-08-01

    01 0 4 In w el4 ’ n r fl f4 r, V 0 𔃾 1" * * * - ~ m ~c- I0 1-0- Q~ 3c 3c~ AdI-. * tp~dip Eu - 4j :: .( - * -U I’ -L - UJ a. Zw a Inc., ɘ L.3. 2-3...swale ap- proximately 100 feet south of Building 222 (Figure 3-7), the Jet Engine Test cell . With the exception of VOC, all param- eters detected at 15-B

  16. Installation Restoration Program Records Search for McChord Air Force Base, Washington.

    DTIC Science & Technology

    1982-08-01

    responsible for smoke testing for possi- ble outlets. g ŕ 115 0 V -j q * REFERENCES * .4 g SI * I w I WI j EU REFERENCES Brandin , R. M., and S. Sgt. S. A...Ms. R. Brandin . Griffin, W. C., et al. 1962. Water Resources of the Tacoma Area Washington. Geological Survey Water Supply Paper 1499-B. Prepared in...MEMBERS vS U STEVEN R. HOFFMAN Education B.S., Civil Engineering, South Dakota School of Mines and Technology, 1971 Experience - -. Mr. Hoffman is a

  17. European Software Engineering Process Group Conference (2nd Annual), EUROPEAN SEPG󈨥. Delegate Material, Conference

    DTIC Science & Technology

    1997-06-19

    states, and six of the top ten suppliers of software with the lowest defect levels are also EU member states Kerry Hanson, Director TI ex White House OST...6,M 0"M *" changes Defects reported by customers STeraQuest S ofOR Wednsday 18 Jlue (C303) 5-3 lE’s IDEAL Model organizational analyze lss.ons exeute...Indicator used to track non discretionary maintenance, enhancements, and defect corrections as well as the number of open trouble reports. 17 *Enterprise

  18. Advanced Stirling Convertor (ASC)--From Technology Development to Future Flight Product

    NASA Technical Reports Server (NTRS)

    Wong, Wayne A.; Wood, J. Gary; Wilson, Kyle

    2008-01-01

    The Advanced Stirling Convertor (ASC) is being developed by Sunpower Inc. under contract to NASA s Glenn Research Center (GRC) with critical technology support tasks led by GRC. The ASC development, funded by NASA s Science Mission Directorate, started in 2003 as one of 10 competitively awarded contracts that were intended to address the power conversion needs of future Radioisotope Power Systems (RPS). The ASC technology has since evolved through progressive convertor builds and successful testing to demonstrate high conversion efficiency (38 percent), low mass (1.3 kg), hermetic sealing, launch vibration simulation, EMI characterization, and is undergoing extended operation. The GRC and Sunpower team recently delivered two ASC-E convertors to the Department of Energy (DOE) and Lockheed Martin Space Systems Company for integration onto the Advanced Stirling Radioisotope Generator Engineering Unit (ASRG EU) plus one spare. The design of the next build, called the ASC-E2, has recently been initiated and is based on the heritage ASC-E with design refinements to increase reliability margin and offer higher temperature operation and improve performance. The ASC enables RPS system specific power of about 7 to 8 W/kg. This paper provides a chronology of ASC development to date and summarizes technical achievements including advancements toward flight implementation of the technology on ASRG by as early as 2013.

  19. Nano-education from a European perspective

    NASA Astrophysics Data System (ADS)

    Malsch, I.

    2008-03-01

    At a global level, educating the nanotechnology workforce has been discussed since the beginning of the new millennium. Scientists, engineers and technicians should be trained in nanotechnology. Most educators prefer training students first in their own discipline at the Bachelor level (physics, chemistry, biology, etc) followed by specialisation in nanoscience and technology at the Master's level. Some favour a broad interdisciplinary basic training in different nanosciences followed by specialisation in a particular application area. What constitutes a good nanoscience curriculum is also being discussed, as well as the application of e-learning methodologies. The European Union is stimulating the development of nanoscience education in universities. The Erasmus Mundus programme is funding nanoscience and nanotechnology education programmes involving universities in several European countries. The policy debate in Europe is moving towards vocational training in nanotechnology for educating the technicians needed in industry and research. The EU vocational training institute CEDEFOP published a report in 2005 The EU funded European gateway to nanotechnology Nanoforum has stimulated the accessibility of nano-education throughout Europe with reports and online databases of education courses and materials. For university education, they list courses at the Bachelor, Master's, and PhD level as well as short courses. The EU funded EuroIndiaNet project also reviewed Nano-education courses at the Master's level, short courses, e-learning programmes, summerschools and vocational training courses. In this presentation, I review Nanoforum and other publications on nano-education in Europe and highlight current trends and gaps.

  20. Probabilistic modeling of the flows and environmental risks of nano-silica.

    PubMed

    Wang, Yan; Kalinina, Anna; Sun, Tianyin; Nowack, Bernd

    2016-03-01

    Nano-silica, the engineered nanomaterial with one of the largest production volumes, has a wide range of applications in consumer products and industry. This study aimed to quantify the exposure of nano-silica to the environment and to assess its risk to surface waters. Concentrations were calculated for four environmental (air, soil, surface water, sediments) and two technical compartments (wastewater, solid waste) for the EU and Switzerland using probabilistic material flow modeling. The corresponding median concentration in surface water is predicted to be 0.12 μg/l in the EU (0.053-3.3 μg/l, 15/85% quantiles). The concentrations in sediments in the complete sedimentation scenario were found to be the largest among all environmental compartments, with a median annual increase of 0.43 mg/kg · y in the EU (0.19-12 mg/kg · y, 15/85% quantiles). Moreover, probabilistic species sensitivity distributions (PSSD) were computed and the risk of nano-silica in surface waters was quantified by comparing the predicted environmental concentration (PEC) with the predicted no-effect concentration (PNEC) distribution, which was derived from the cumulative PSSD. This assessment suggests that nano-silica currently poses no risk to aquatic organisms in surface waters. Further investigations are needed to assess the risk of nano-silica in other environmental compartments, which is currently not possible due to a lack of ecotoxicological data. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. Distributed parallel messaging for multiprocessor systems

    DOEpatents

    Chen, Dong; Heidelberger, Philip; Salapura, Valentina; Senger, Robert M; Steinmacher-Burrow, Burhard; Sugawara, Yutaka

    2013-06-04

    A method and apparatus for distributed parallel messaging in a parallel computing system. The apparatus includes, at each node of a multiprocessor network, multiple injection messaging engine units and reception messaging engine units, each implementing a DMA engine and each supporting both multiple packet injection into and multiple reception from a network, in parallel. The reception side of the messaging unit (MU) includes a switch interface enabling writing of data of a packet received from the network to the memory system. The transmission side of the messaging unit, includes switch interface for reading from the memory system when injecting packets into the network.

  2. A measuring stand for a ducted fan aircraft propulsion unit

    NASA Astrophysics Data System (ADS)

    Hlaváček, David

    2014-03-01

    The UL-39 ultra-light aircraft which is being developed by the Department of Aerospace Engineering, Faculty of Mechanical Engineering, Czech Technical University in Prague, is equipped with an unconventional ducted fan propulsion unit. The unit consists of an axial fan driven by a piston engine and placed inside a duct ended with a nozzle. This article describes the arrangement of a modernised measuring stand for this highly specific propulsion unit which will be able to measure the fan pressure ratio and velocity field in front of and behind the fan and its characteristic curve.

  3. Functionalisation of lanthanide complexes via microwave-enhanced Cu(I)-catalysed azide-alkyne cycloaddition.

    PubMed

    Szíjjártó, Csongor; Pershagen, Elias; Borbas, K Eszter

    2012-07-07

    Cu(I)-catalysed azide-alkyne cycloaddition reactions were used to functionalise lanthanide(III)-complexes (Ln; La, Eu and Tb) incorporating alkyne or azide reactive groups. Microwave irradiation significantly accelerated the reactions, enabling full conversion to the triazole products in some cases in 5 min. Alkyl and aryl azides and alkyl and aryl alkynes could all serve as coupling partners. These reaction conditions proved efficient for cyclen-tricarboxylates and previously unreactive cyclen-tris-primary amide chelates. The synthesis of heterobimetallic (Eu/Tb, EuTb17 and Eu/La, EuLa17) and heterotrimetallic (Eu/La/Eu) complexes was achieved in up to 60% isolated yield starting from coumarin 2-appended alkynyl complexes Tb16 or La16 and an azido-Eu complex Eu4, and bis-alkynyl La-complex La5 and Eu4, respectively. EuTb17 displayed dual Eu(III) and Tb(III)-emission upon antenna-centred excitation.

  4. ENGINEERING DEVELOPMENT UNIT SOLAR SAIL

    NASA Image and Video Library

    2016-01-13

    TIFFANY LOCKETT OVERSEES THE HALF SCALE (36 SQUARE METERS) ENGINEERING DEVELOPMENT UNIT (EDU) SOLAR SAIL DEPLOYMENT DEMONSTRATION IN PREPARATION FOR FULL SCALE EDU (86 SQUARE METERS) DEPLOYMENT IN APRIL, 2016

  5. Temperature dependent luminescence and energy transfer properties of Na2SrMg(PO4)2:Eu2+, Mn2+ phosphors.

    PubMed

    Geng, Dongling; Shang, Mengmeng; Zhang, Yang; Lian, Hongzhou; Lin, Jun

    2013-11-21

    Eu(2+) singly and Eu(2+)/Mn(2+) co-doped Na2SrMg(PO4)2 (NSMP) phosphors have been prepared via a high-temperature solid-state reaction process. Upon UV excitation of 260-360 nm, the NSMP:xEu(2+) phosphors exhibit a violet band located at 399 nm and a blue band centered at 445 nm, which originate from Eu(2+) ions occupying two different crystallographic sites: Eu(2+)(I) and Eu(2+)(II), respectively. Excitation wavelengths longer than 380 nm can selectively excite Eu(2+)(II) to emit blue light. Energy transfer processes in the Eu(2+)(I)-Eu(2+)(II) and Eu(2+)-Mn(2+) pairs have been observed and investigated by luminescence spectra and decay curves. The emission color of as-prepared samples can be tuned by changing the relative concentrations of Eu(2+) and Mn(2+) ions and adjusting the excitation wavelength. Under UV excitation of 323 nm, the absolute quantum yield of NSMP:0.005Eu(2+) is 91%, which is higher than most of the other Eu(2+)-doped phosphors reported previously. The temperature dependent luminescence properties and decay curves (4.3-450 K) of NSMP:Eu(2+) and NSMP:Eu(2+), Mn(2+) phosphors have been studied in detail. Thermal quenching of Eu(2+) has been observed while the emission band of Mn(2+) shows a blue-shift and an abnormal increase of intensity with increasing temperature. The unusual thermal quenching behavior indicates that the NSMP compound can serve as a good lattice host for Mn(2+) ions which can be used as a red-emitting phosphor. Additionally, the lifetimes for Eu(2+)(I) and Eu(2+)(II) increase with increasing temperatures.

  6. Direct excitation luminescence spectroscopy of Eu(III) complexes of 1,4,7-tris(carbamoylmethyl)-1,4,7,10- tetraazacyclododecane derivatives and kinetic studies of their catalytic cleavage of an RNA analog.

    PubMed

    Nwe, Kido; Richard, John P; Morrow, Janet R

    2007-11-28

    The macrocycles 1,4,7-tris(carbamoylmethyl)-1,4,7,10-tetrazacyclododecane (1), 1,4,7-tris[(N-ethyl)carbamoylmethyl]-1,4,7,10-tetraazacyclododecane (2), 1,4,7-tris[(N,N-diethyl)carbamoylmethyl]-1,4,7,10-tetraazacyclododecane (3) and their Eu(III) complexes are prepared. Studies using direct Eu(III) excitation luminescence spectroscopy show that all three Eu(III) complexes exhibit only one predominant isomer with two bound waters under neutral to mildly basic conditions (Eu(X)(H(2)O)(2) for X = 1-3). There are no detectable ligand ionizations over the pH range 5.0-8.0 for Eu(3), 5.0-8.5 for Eu(2) or 5.0-9.5 for Eu(1). The three Eu(III) complexes show a linear dependence of second-order rate constants for the cleavage of 4-nitrophenyl-2-hydroxyethylphosphate (HpPNP) on pH in the range 6.5-8.0 for Eu(3), 7.0-8.5 for Eu(2) and 7.0-9.0 for Eu(1). This pH-rate profile is consistent with the Eu(III) complex-substrate complex being converted to the active form by loss of a proton and with Eu(III) water pK(a) values that are higher than 8.0 for Eu(3), 8.5 for Eu(2) and 9.0 for Eu(1). Inhibition studies show that Eu() binds strongly to the dianionic ligand methylphosphate (K(d) = 0.28 mM), and more weakly to diethylphosphate (K(d) = 7.5 mM), consistent with a catalytic role of the Eu(III) complexes in stabilizing the developing negative charge on the phosphorane transition state.

  7. Strong Eu2+ light emission in Eu silicate through Eu3+ reduction in Eu2O3/Si multilayer deposited on Si substrates

    PubMed Central

    2013-01-01

    Eu2O3/Si multilayer nanostructured films are deposited on Si substrates by magnetron sputtering. Transmission electron microscopy and X-ray diffraction measurements demonstrate that multicrystalline Eu silicate is homogeneously distributed in the film after high-temperature treatment in N2. The Eu2+ silicate is formed by the reaction of Eu2O3 and Si layers, showing an intense and broad room-temperature photoluminescence peak centered at 610 nm. It is found that the Si layer thickness in nanostructures has great influence on Eu ion optical behavior by forming different Eu silicate crystalline phases. These findings open a promising way to prepare efficient Eu2+ materials for photonic application. PMID:23618344

  8. Losses of Ammonia and Nitrate from Agriculture and Their Effect on Nitrogen Recovery in the European Union and the United States between 1900 and 2050.

    PubMed

    van Grinsven, Hans J M; Bouwman, Lex; Cassman, Kenneth G; van Es, Harold M; McCrackin, Michelle L; Beusen, Arthur H W

    2015-03-01

    Historical trends and levels of nitrogen (N) budgets and emissions to air and water in the European Union and the United States are markedly different. Agro-environmental policy approaches also differ, with emphasis on voluntary or incentive-based schemes in the United States versus a more regulatory approach in the European Union. This paper explores the implications of these differences for attaining long-term policy targets for air and water quality. Nutrient surplus problems were more severe in the European Union than in the United States during the 1970s and 1980s. The EU Nitrates and National Emission Ceilings directives contributed to decreases in fertilizer use, N surplus, and ammonia (NH) emissions, whereas in the United States they stabilized, although NH emissions are still increasing. These differences were analyzed using statistical data for 1900-2005 and the global IMAGE model. IMAGE could reproduce NH emissions and soil N surpluses at different scales (European Union and United States, country and state) and N loads in the Rhine and Mississippi. The regulation-driven changes during the past 25 yr in the European Union have reduced public concerns and have brought agricultural N loads to the aquatic environment closer to US levels. Despite differences in agro-environmental policies and agricultural structure (more N-fixing soybean and more spatially separated feed and livestock production in the United States than in the European Union), current N use efficiency in US and EU crop production is similar. IMAGE projections for the IAASTD-baseline scenario indicate that N loading to the environment in 2050 will be similar to current levels. In the United States, environmental N loads will remain substantially smaller than in the European Union, whereas agricultural production in 2050 in the United States will increase by 30% relative to 2005, as compared with an increase of 8% in the European Union. However, in the United States, even rigorous mitigation with maximum recycling of manure N and a 25% reduction in fertilizer use will not achieve the policy target to halve the N export to the Gulf of Mexico. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

  9. Effects of La0.2Ce0.6Eu0.2F3 nanocrystals capped with polyethylene glycol on human pancreatic cancer cells in vitro

    NASA Astrophysics Data System (ADS)

    Withers, Nathan J.; Glazener, Natasha N.; Rivera, Antonio C.; Akins, Brian A.; Armijo, Leisha M.; Plumley, John B.; Cook, Nathaniel C.; Sugar, Jacqueline M.; Chan, Rana; Brandt, Yekaterina I.; Smolyakov, Gennady A.; Heintz, Philip H.; Osiński, Marek

    2013-02-01

    Lanthanide fluoride colloidal nanocrystals offer a way to improve the diagnosis and treatment of cancer through the enhanced absorption of ionizing radiation, in addition to providing visible luminescence. In order to explore this possibility, tests with a kilovoltage therapy unit manufactured by the Universal X-Ray Company were performed to estimate the energy sensitivity of this technique. La0.2Ce0.6Eu0.2F3 nanocrystals capped with polyethylene glycol of molecular weight 6000 were synthesized, suspended in deionized water, and made tolerant to biological ionic pressures by incubation with fetal bovine serum. These nanocrystals were characterized by dynamic light scattering, muffle furnace ashing, and photoluminescence spectroscopy. Clonogenic assays were performed on the cells to assay the cytotoxicity and radiotoxicity of the nanocrystals on the human pancreatic cancer cell line PANC-1, purchased from ATCC.

  10. [Microbial exposure in collection of residential garbage--results of field studies].

    PubMed

    Neumann, H D; Balfanz, J

    1999-01-01

    Since 1995 the communal accident insurance carrier of the county Wetfalen-Lippe conducts investigations into the exposure to biological agents related to refuse collection. Total fungal exposure during refuse collection turned out to range from 10,000 up to 750,000 colony forming units per cubic meter. Most of the measurement values exceeded the limit of 50,000. During hot periods in the summertime, the concentration of Aspergillus fumigatus increased up to 90,000 cfu/m3. The mean values of the bacterial concentrations ranged from 15,000 up to 50,000 cfu/m3, the endotoxin concentration from 12 up to 59 EU/m3. In the driver's cabin fungal exposure sometimes exceeded 10,000 cfu/m3 especially in autumn and winter. Maximum values were 5,000 cfu/m3 for bacteria and 15 EU/m3 for endotoxins. High values were measured irrespective of the kind of refuse.

  11. Assessment of Trachoma in Cambodia: Trachoma Is Not a Public Health Problem.

    PubMed

    Meng, Ngy; Seiha, Do; Thorn, Pok; Willis, Rebecca; Flueckiger, Rebecca M; Dejene, Michael; Lewallen, Susan; Courtright, Paul; Solomon, Anthony W

    2016-01-01

    To determine whether trachoma is a public health problem requiring intervention in Cambodia. Based on historical evidence and reports, 14 evaluation units (EUs) in Cambodia, judged to be most likely to harbor trachoma, were selected. The Global Trachoma Mapping Project methodology was used to carry out rigorous surveys to determine the prevalence of trachomatous inflammation-follicular (TF) and trichiasis in each EU. The EU-level prevalence of TF among 25,801 1-9-year-old children examined ranged from 0% to 0.2%. Among the 24,502 adults aged 15+ years examined, trichiasis was found in 59 people. Age- and sex-adjusted prevalences of trichiasis in all ages in the EUs studied ranged from 0% to 0.14%; five EUs had a prevalence of trichiasis ≥0.1%. There appears to be no need nor justification at this time for implementing public health measures to control trachoma in Cambodia.

  12. Construction of Eu(III)- and Tb(III)-MOFs with photoluminescence for sensing small molecules based on furan-2,5-dicarboxylic acid

    NASA Astrophysics Data System (ADS)

    Zhao, Shuai; Hao, Xue-Min; Liu, Jia-Lin; Wu, Lin-Wei; Wang, Hao; Wu, Yi-Bo; Yang, Dan; Guo, Wen-Li

    2017-11-01

    Two isostructural lanthanide MOFs, [Ln3K2(FDA)4(NO3)3(MeCN)2]n (Ln = Eu 1, Tb 2) (H2FDA= furan-2,5-dicarboxylic acid), have been constructed under solvothermal conditions. Structures analyses demonstrate two complexes possess three-dimensional network with monoclinic space group C2/c. The topology analysis shows that the whole framework can be simplified to a 3,8T24 topology constructed from trinuclear {Ln3} as secondary building units (SBUs) without considering K+ ions. Solid state luminescent studies indicate that 1 and 2 show the characteristic red and green emissions of the corresponding Ln3+ ions, respectively. The luminescence lifetimes of 1 and 2 are approximately 1.04 ms and 0.41 ms. In addition, activated 1 exhibits excellent fluorescence sensing for small molecules, especially for nitrobenzene.

  13. AUTOMOTIVE DIESEL MAINTENANCE 1. UNIT XVII, I--MAINTAINING THE LUBRICATION SYSTEM--CUMMINS DIESEL ENGINE, II--UNIT INSTALLATION AND REMOVAL--DRIVE LINES.

    ERIC Educational Resources Information Center

    Minnesota State Dept. of Education, St. Paul. Div. of Vocational and Technical Education.

    THIS MODULE OF A 30-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE DIESEL ENGINE LUBRICATION SYSTEM AND THE PROCEDURES FOR REMOVAL AND INSTALLATION OF THE DRIVE LINE USED IN DIESEL ENGINE POWER DISTRIBUTION. TOPICS ARE (1) PROLONGING ENGINE LIFE, (2) FUNCTIONS OF THE LUBRICATING SYSTEM, (3) TRACING THE LUBRICANT FLOW, (4) DETERMINING…

  14. Improving Legacy Aircraft Systems Through Condition-Based Maintenance: An H-60 Case Study

    DTIC Science & Technology

    2014-09-01

    level functions. These decompositions are equivalent to a detailed design effort in systems engineering. NAMPSOPs have a common architectural structure...Assembly Power Available Spindle Cables No.1 Engine Load Demand Spindle Control Cables Engine Pneumatic Starters Auxiliary Power Unit IRCM FLIR Mission...Analysis Fuel System Main Rotor Head Main Module Main Gear Box Radiator Engine Output Shaft Auxiliary Power Unit Flight Control Cables Tail Landing

  15. Challenges of the biomedical engineering education in Europe.

    PubMed

    Magjarevic, Ratko; Lackovic, Igor; Bliznakov, Zhivko; Pallikarakis, Nicolas

    2010-01-01

    Higher education in Europe has passed through a very dynamic period of changes during the last ten years. Since the signing of the Bologna Declaration in 1999 by the Ministers of Education from the EU states, European higher education system has aimed toward establishing harmonized programs enabling students and teachers to extensively exchange knowledge, ideas and skills. Education in the field of Biomedical Engineering has experienced changes also because of the research and development in the field which was more intensive than in other fields. Besides research in new power sources, it is the most intensive and productive research field. Much of the development in BME education in Europe is influenced by the European research policy expressed through the 7th Framework Programme where health is the major theme. In order to foster and support the changes in the European Higher Education Area (EHEA) according to the needs of research sector and the labor market, the Tempus scheme of projects was established. Tempus scheme aims to support the modernization of higher education and create an area of co-operation in the countries surrounding the EU. Our Tempus project, CRH-BME "Curricula Reformation and Harmonization in the field of Biomedical Engineering" aims to create guidelines for updating existing curricula in the field of BME in Europe in order to meet recent and future developments in the area, address new emerging interdisciplinary domains that appear as the result of the R&D progress and respond to the BME job market demands. In this paper, some policy and economic factors affecting BME education in Europe are discussed and the results of a BME education survey we prepared within the Tempus CHR-BME project are presented. The number of BME programmes in Europe has in the last decade significantly increased and there are more BME specializations as the result of growing complexity of the research and production in the field.

  16. Enhancement of environment and resources engineering studies through an international cooperation network

    NASA Astrophysics Data System (ADS)

    Caporali, E.; Tuneski, A.

    2012-12-01

    Higher education plays a very important role in the modern societies development, enhancing social, cultural and economic development for a sustainable growth, environment respectful. In this framework, the European Commission promotes the TEMPUS-Trans European Mobility Programme for University Studies. Curricula harmonization and lifelong learning programme development in higher education are among the focused aspects of the TEMPUS programme. The DEREL-Development of Environment and Resources Engineering Learning, is a three years TEMPUS project coordinated by the University of Firenze, in cooperation with colleagues of the Ss Cyril and Methodius University, Skopje financed and activated since October 2010. The DEREL Project Consortium consists of 4 EU Universities (from Italy, Greece, Germany and Austria), 7 Partner Countries (PC) Universities (from FYR of Macedonia, Serbia and Albania), and 1 PC Ministry, 4 PC National Agencies, 1 PC non governmental organization and 1 PC enterprise. In cooperation with the same 4 EU Universities and the same Macedonian Institutions, in the period 2005-2008 also a TEMPUS JEP entitled DEREC-Development of Environmental and Resources Engineering Curriculum, was also carried out by the University of Firenze in cooperation with colleagues of the Ss Cyril and Methodius University. Within DEREC a new three-years first cycle curriculum in Environmental and Resources Engineering was opened at the University Ss Cyril and Methodius, Skopje, and the necessary conditions for offering a Joint Degree Title, on the basis of an agreement between the Ss. Cyril and Methodius University and the University of Firenze, were fulfilled. The running DEREL project, as a continuation of DEREC, is aimed to introduce a new, up-to-date, postgraduate second cycle curriculum in Environment and Resources Engineering at the Ss Cyril and Methodius University in Skopje, FYR of Macedonia, University of Novi Sad, Serbia and Polytechnic University of Tirana, Albania, following the criteria and conditions for setting up a Joint Postgraduate Degree. The new second cycle degree courses are going to be activated in the academic year 2012/2012. Both the first and second cycle curricula, developed through the co-operation, exchange of know-how and expertise between partners, are based on the European Credit Transfer System and are in accordance with the Bologna Process. In DEREL a second objective is to implement a sustainable regional network aimed to offer lifelong learning seminars for environment and resources engineering education and training of interested stakeholders and organize workshops focused on strengthening the links in the knowledge triangle: environment education-innovation-research, with participation of postgraduate students, public services, enterprises and NGO's. Also, the good collaborative environment created, since 2005, with the project partners can be surely mentioned as an additional valuable objective of the two TEMPUS projects, enabling implementation of a sustainable international network for environment and resources engineering studies enhancement and development.

  17. Circulating autoantibodies to recombinant lipocortin-1 in asthma.

    PubMed

    Chung, K F; Podgorski, M R; Goulding, N J; Godolphin, J L; Sharland, P R; O'Connor, B; Flower, R J; Barnes, P J

    1991-03-01

    One of the postulated mechanisms of corticosteroid action is through the de novo synthesis and release of lipocortins. We assayed circulating antibodies to lipocortin-1 in sera obtained from normal (n = 67) and asthmatic (n = 57) subjects using an ELISA technique. Asthmatic subjects with a wide range of severity, with the mildest needing only occasional inhaled beta-agonist therapy to the most severe needing maintenance oral corticosteroid treatment, were recruited from our Asthma Clinic and classified into five categories according to the need of therapy. Median values of IgM and IgG lipocortin-1 antibody for normal subjects were 19.3 (interquartile range (r) = 11.0-30.4) and 16.9 (r = 10.54-29.4) ELISA units (EU) ml-1 respectively. These levels were significantly elevated in asthmatic subjects: IgM = 43.9 EU ml-1 (r = 31.7-64.5) and IgG = 29.0 EU ml-1 (r = 21.2-44.7) (P less than 0.001). There was no significant relationship between the levels of lipocortin antibody and the clinical severity of asthma. Asthmatics with significantly raised levels of antibody were found within all five categories of severity. We conclude that the level of this antibody is not related to severity of asthma, to previous or current corticosteroid therapy or to the development of corticosteroid resistance.

  18. Engineering Curriculum Development: Balancing Employer Needs and National Interest--A Case Study.

    ERIC Educational Resources Information Center

    Buniyamin, Norlida; Mohamad, Zainuddin

    The Faculty of Mechanical Engineering at the University Teknologi MARA, Malaysia, developed an undergraduate-level engineering curriculum that balances national interests with those of employers and academics. The curriculum was based on materials posted at the Internet sites of universities in the United States, United Kingdom, and Malaysia…

  19. Voices from the United Arab Emirates: Engineering Graduates' Labour Market Requisite Competencies

    ERIC Educational Resources Information Center

    EL-Sakran, Tharwat M.; Awad, Asmaa

    2012-01-01

    This study reports on engineering graduates' labour market requisite communication competences and skills in the work environment in the United Arab Emirates (UAE). Its main purpose was to investigate whether internationally required engineering graduates' communication competences were the same in third world countries or different. It used a…

  20. Engineering Encounters: Sailing into the Digital Era

    ERIC Educational Resources Information Center

    Bellavance, Janet; Truchon, Amy

    2015-01-01

    This article describes how Janet Bellavance teamed with technology integration specialist, Amy Truchon to incorporate iPads into her Engineering is Elementary (EiE) unit--a curriculum that engages elementary students in engineering simple technologies. In an EiE unit, students design, test, and then, based on test results, improve their design,…

  1. Characteristics of Doctoral Scientists and Engineers in the United States, 1973.

    ERIC Educational Resources Information Center

    Scopino, John A.; And Others

    This publication presents data on the supply, utilization, and characteristics of U.S. doctoral scientists and engineers. The population surveyed consisted of individuals in the United States who held science or engineering doctorates, or who had received doctorates in nonscience and nonengineering areas but were employed in science or engineering…

  2. COST Action TU1208 - Working Group 3 - Electromagnetic modelling, inversion, imaging and data-processing techniques for Ground Penetrating Radar

    NASA Astrophysics Data System (ADS)

    Pajewski, Lara; Giannopoulos, Antonios; Sesnic, Silvestar; Randazzo, Andrea; Lambot, Sébastien; Benedetto, Francesco; Economou, Nikos

    2017-04-01

    This work aims at presenting the main results achieved by Working Group (WG) 3 "Electromagnetic methods for near-field scattering problems by buried structures; data processing techniques" of the COST (European COoperation in Science and Technology) Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar" (www.GPRadar.eu, www.cost.eu). The main objective of the Action, started in April 2013 and ending in October 2017, is to exchange and increase scientific-technical knowledge and experience of Ground Penetrating Radar (GPR) techniques in civil engineering, whilst promoting in Europe the effective use of this safe non-destructive technique. The Action involves more than 150 Institutions from 28 COST Countries, a Cooperating State, 6 Near Neighbour Countries and 6 International Partner Countries. Among the most interesting achievements of WG3, we wish to mention the following ones: (i) A new open-source version of the finite-difference time-domain simulator gprMax was developed and released. The new gprMax is written in Python and includes many advanced features such as anisotropic and dispersive-material modelling, building of realistic heterogeneous objects with rough surfaces, built-in libraries of antenna models, optimisation of parameters based on Taguchi's method - and more. (ii) A new freeware CAD was developed and released, for the construction of two-dimensional gprMax models. This tool also includes scripts easing the execution of gprMax on multi-core machines or network of computers and scripts for a basic plotting of gprMax results. (iii) A series of interesting freeware codes were developed will be released by the end of the Action, implementing differential and integral forward-scattering methods, for the solution of simple electromagnetic problems by buried objects. (iv) An open database of synthetic and experimental GPR radargrams was created, in cooperation with WG2. The idea behind this initiative is to give researchers the opportunity of testing and validating, against reliable data, their electromagnetic-modelling, inversion, imaging and processing algorithms. One of the most interesting dataset comes from the IFSTTAR Geophysical Test Site, in Nantes (France): this is an open-air laboratory including a large and deep area, filled with various materials arranged in horizontal compacted slices, separated by vertical interfaces and water-tighted in surface; several objects as pipes, polystyrene hollows, boulders and masonry are embedded in the field. Data were collected by using nine different GPR systems and at different frequencies ranging from 200 MHz to 1 GHz. Moreover, some sections of this test site were modelled by using gprMax and the commercial software CST Microwave Studio. Hence, both experimental and synthetic data are available. Further interesting datasets were collected on roads, bridges, concrete cells, columns - and more. (v) WG3 contributed to the TU1208 Education Pack, an open educational package conceived to teach GPR in University courses. (vi) WG3 was very active in offering training activities. The following courses were successfully organised: Training School (TS) "Microwave Imaging and Diagnostics" (in cooperation with the European School of Antennas; 1st edition: Madonna di Campiglio, Italy, March 2014, 2nd edition: Taormina, Italy, October 2016); TS "Numerical modelling of Ground Penetrating Radar using gprMax" (Thessaloniki, Greece, November 2015); TS "Electromagnetic Modelling Techniques for Ground Penetrating Radar" (Split, Croatia, November 2016). Moreover, WG3 organized a workshop on "Electromagnetic modelling with the Finite-Difference Time-Domain technique" (Nantes, France, February 2014) and a workshop on "Electromagnetic modelling and inversion techniques for GPR" (Davos, Switzerland, April 2016) within the 2016 European Conference on Antennas and Propagation (EuCAP). Acknowledgement: The Authors are deeply grateful to COST (European COoperation in Science and Technology, www.cost.eu), for funding and supporting the COST Action TU1208 "Civil engineering applications of Ground Penetrating Radar" (www.GPRadar.eu).

  3. Analysis of long-time operation of micro-cogeneration unit with fuel cell

    NASA Astrophysics Data System (ADS)

    Patsch, Marek; Čaja, Alexander

    2015-05-01

    Micro-cogeneration is cogeneration with small performance, with maximal electric power up to 50 kWe. On the present, there are available small micro-cogeneration units with small electric performance, about 1 kWe, which are usable also in single family houses or flats. These micro-cogeneration units operate on principle of conventional combustion engine, Stirling engine, steam engine or fuel cell. Micro-cogeneration units with fuel cells are new progressive developing type of units for single family houses. Fuel cell is electrochemical device which by oxidation-reduction reaction turn directly chemical energy of fuel to electric power, secondary products are pure water and thermal energy. The aim of paper is measuring and evaluation of operation parameters of micro-cogeneration unit with fuel cell which uses natural gas as a fuel.

  4. Near-memory data reorganization engine

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gokhale, Maya; Lloyd, G. Scott

    A memory subsystem package is provided that has processing logic for data reorganization within the memory subsystem package. The processing logic is adapted to reorganize data stored within the memory subsystem package. In some embodiments, the memory subsystem package includes memory units, a memory interconnect, and a data reorganization engine ("DRE"). The data reorganization engine includes a stream interconnect and DRE units including a control processor and a load-store unit. The control processor is adapted to execute instructions to control a data reorganization. The load-store unit is adapted to process data move commands received from the control processor via themore » stream interconnect for loading data from a load memory address of a memory unit and storing data to a store memory address of a memory unit.« less

  5. Science & Engineering Indicators - 1991. Tenth Edition.

    ERIC Educational Resources Information Center

    National Science Foundation, Washington, DC. National Science Board.

    This report is designed to provide public and private policymakers with a broad base of quantitative information about United States science and engineering research and education and about United States technology in a global context. This document begins with a synopsis of United States science and technology. Chapter 1, "Precollege Science and…

  6. United States Air Force 611th Civil Engineer Squadron, Elmendorf, AFB, Alaska. Final engineering evaluation/cost analysis, million gallon hill source area of the West Unit, Galena Airport, Alaska

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1996-02-05

    This decision document presents the selected removal action for the Million Gallon Hill source area of the Installation Restoration Program (IRP) site ST009, otherwise known as the West Unit at Galena Airport, Alaska. The information from the RI Report is summarized, along with an analysis of potential removal action alternatives in the Engineering Evaluation/Cost Analysis (EE/CA).

  7. 8. SHEET 2, CONTROL HOUSE FOR DRY DOCK. United Engineering ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. SHEET 2, CONTROL HOUSE FOR DRY DOCK. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities, Office Building. John Hudspeth, Architect, at foot of Main Street, Alameda, Calif. Sheet no. 2 of 2 sheets, Plan no. 10,507. Various scales. January 4, 1943, last revised 1/19/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Control House for Dry Dock, 2900 Main Street, Alameda, Alameda County, CA

  8. WAREHOUSE END FRAMING. United Engineering Company Ltd., Alameda Shipyard. Sections ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    WAREHOUSE END FRAMING. United Engineering Company Ltd., Alameda Shipyard. Sections at north and detail sections. No architect noted. Drawn by Penney. Plan no. 2-N-9 (U.E. Co. plan no. 10,523). Scales 1/4 inch and 1 inch to the foot. March 10, 1942, no revisions. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76, item no. 22A. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Warehouse, 2900 Main Street, Alameda, Alameda County, CA

  9. Pressure-induced valence change and moderate heavy fermion state in Eu-compounds

    NASA Astrophysics Data System (ADS)

    Honda, Fuminori; Okauchi, Keigo; Sato, Yoshiki; Nakamura, Ai; Akamine, Hiromu; Ashitomi, Yosuke; Hedo, Masato; Nakama, Takao; Takeuchi, Tetsuya; Valenta, Jaroslav; Prchal, Jiri; Sechovský, Vladimir; Aoki, Dai; Ōnuki, Yoshichika

    2018-05-01

    A pressure-induced valence transition has attracted much attention in Eu-compounds. Among them, EuRh2Si2, EuNi2Ge2, and EuCo2Ge2 reveal the valence transition around 1, 2, and 3 GPa, respectively. We have succeeded in growing single crystals of EuT2X2 (T: transition metal, X: Si, Ge) and studied electronic properties under pressure. EuRh2Si2 indicates a first-order valence transition between 1 and 2 GPa, with a large and prominent hysteresis in the electrical resistivity. At higher pressures, the first-order valence transition changes to a cross-over regime with an intermediate valence state. Tuning of the valence state with pressure is reflected in a drastic change of the temperature dependence of the electrical resistivity in EuRh2Si2 single crystals. Effect of pressure on the valence states on EuRh2Si2, EuIr2Si2, EuNi2Ge2, and EuCo2Ge2, as well as an isostructural related compound EuGa4, are reviewed.

  10. Methodology for quantification of waste generated in Spanish railway construction works.

    PubMed

    de Guzmán Báez, Ana; Villoria Sáez, Paola; del Río Merino, Mercedes; García Navarro, Justo

    2012-05-01

    In the last years, the European Union (EU) has been focused on the reduction of construction and demolition (C&D) waste. Specifically, in 2006, Spain generated roughly 47million tons of C&D waste, of which only 13.6% was recycled. This situation has lead to the drawing up of many regulations on C&D waste during the past years forcing EU countries to include new measures for waste prevention and recycling. Among these measures, the mandatory obligation to quantify the C&D waste expected to be originated during a construction project is mandated. However, limited data is available on civil engineering projects. Therefore, the aim of this research study is to improve C&D waste management in railway projects, by developing a model for C&D waste quantification. For this purpose, we develop two equations which estimate in advance the amount, both in weight and volume, of the C&D waste likely to be generated in railway construction projects, including the category of C&D waste generated for the entire project. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. High-skilled labour mobility in Europe before and after the 2004 enlargement

    PubMed Central

    Puliga, Michelangelo

    2017-01-01

    The extent to which international high-skilled mobility channels are forming is a question of great importance in an increasingly global knowledge-based economy. One factor facilitating the growth of high-skilled labour markets is the standardization of certifiable degrees meriting international recognition. Within this context, we analysed an extensive high-skilled mobility database comprising roughly 382 000 individuals from five broad profession groups (Medical, Education, Technical, Science & Engineering and Business & Legal) over the period 1997–2014, using the 13-country expansion of the European Union (EU) to provide insight into labour market integration. We compare the periods before and after the 2004 enlargement, showing the emergence of a new east–west migration channel between the 13 mostly eastern EU entrants (E) and the rest of the western European countries (W). Indeed, we observe a net directional loss of human capital from E → W, representing 29% of the total mobility after 2004. Nevertheless, the counter-migration from W → E is 7% of the total mobility over the same period, signalling the emergence of brain circulation within the EU. Our analysis of the country–country mobility networks and the country–profession bipartite networks provides timely quantitative evidence for the convergent integration of the EU, and highlights the central role of the UK and Germany as high-skilled labour hubs. We conclude with two data-driven models to explore the structural dynamics of the mobility networks. First, we develop a reconfiguration model to explore the potential ramifications of Brexit and the degree to which redirection of high-skilled labourers away from the UK may impact the integration of the rest of the European mobility network. Second, we use a panel regression model to explain empirical high-skilled mobility rates in terms of various economic ‘push–pull’ factors, the results of which show that government expenditure on education, per capita wealth, geographical proximity and labour force size are significant attractive features of destination countries. PMID:28298610

  12. High-skilled labour mobility in Europe before and after the 2004 enlargement.

    PubMed

    Petersen, Alexander M; Puliga, Michelangelo

    2017-03-01

    The extent to which international high-skilled mobility channels are forming is a question of great importance in an increasingly global knowledge-based economy. One factor facilitating the growth of high-skilled labour markets is the standardization of certifiable degrees meriting international recognition. Within this context, we analysed an extensive high-skilled mobility database comprising roughly 382 000 individuals from five broad profession groups (Medical, Education, Technical, Science & Engineering and Business & Legal) over the period 1997-2014, using the 13-country expansion of the European Union (EU) to provide insight into labour market integration. We compare the periods before and after the 2004 enlargement, showing the emergence of a new east-west migration channel between the 13 mostly eastern EU entrants (E) and the rest of the western European countries (W). Indeed, we observe a net directional loss of human capital from E → W, representing 29% of the total mobility after 2004. Nevertheless, the counter-migration from W → E is 7% of the total mobility over the same period, signalling the emergence of brain circulation within the EU. Our analysis of the country-country mobility networks and the country-profession bipartite networks provides timely quantitative evidence for the convergent integration of the EU, and highlights the central role of the UK and Germany as high-skilled labour hubs. We conclude with two data-driven models to explore the structural dynamics of the mobility networks. First, we develop a reconfiguration model to explore the potential ramifications of Brexit and the degree to which redirection of high-skilled labourers away from the UK may impact the integration of the rest of the European mobility network. Second, we use a panel regression model to explain empirical high-skilled mobility rates in terms of various economic 'push-pull' factors, the results of which show that government expenditure on education, per capita wealth, geographical proximity and labour force size are significant attractive features of destination countries. © 2017 The Author(s).

  13. Ferromagnetic behavior in mixed valence europium (Eu2+/Eu3+) oxide EuTi1-xMxO3 (M = Al3+ and Ga3+)

    NASA Astrophysics Data System (ADS)

    Akahoshi, Daisuke; Horie, Hiroki; Sakai, Shingo; Saito, Toshiaki

    2013-10-01

    We have investigated the Ti-site substitution effect on the magnetic properties of antiferromagnetic insulator EuTiO3 with a Néel temperature of ˜5 K. Partial substitution of Ti4+ with heterovalent Al3+ or Ga3+ turns the corresponding amount of magnetic Eu2+ into non-magnetic Eu3+. Both EuTi1-xAlxO3 (0.05 ≤ x ≤ 0.10) and EuTi1-xGaxO3 (0.05 ≤ x ≤ 0.10) exhibit ferromagnetic (FM) insulating behavior below ˜4 K. The Eu2+/Eu3+ mixed valence state probably contributes to the emergence of the FM behavior. Fine control of the magneto-electric (ME) phases of EuTi1-xAlxO3 and EuTi1-xGaxO3 would lead to intriguing ME phenomena such as giant ME effect.

  14. First-principles calculation on electronic structure and optical property of BaSi{sub 2}O{sub 2}N{sub 2}:Eu{sup 2+} phosphor

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tong, Zhi-Fang, E-mail: tongzhifang1998@126.com; Wei, Zhan-Long; Xiao, Cheng

    The crystal structure, electronic structure and optical properties of BaSi{sub 2}O{sub 2}N{sub 2}:Eu{sup 2+} with varying Eu doping concentrations are computed by the density functional theory (DFT) and compared with experimental results. The results show that the lattice parameters of primitive cells of Ba{sub 1−x}Si{sub 2}O{sub 2}N{sub 2}:Eu{sub x} become smaller and Eu–N bond length shortens as Eu concentration increases. The band structure of Ba{sub 1−x}Si{sub 2}O{sub 2}N{sub 2}:Eu{sub x} exhibits a direct optical band gap and it's propitious to luminescence. The energy differences from the lowest Eu 5d state to the lowest Eu 4f state decrease with increasing Eumore » concentrations. The analysis of simulative absorption spectra indicates that the electron transition from Eu 4f states to 5d states of both Eu and Ba atoms contributes to the absorption of Ba{sub 1−x}Si{sub 2}O{sub 2}N{sub 2}:Eu{sub x}. Under the coupling effect between Eu and Ba, Ba in BaSi{sub 2}O{sub 2}N{sub 2} exhibits longer wavelength absorption and increases absorption efficiency. The emission wavelength is deduced by measuring energy differences from the lowest Eu 5d state to the lowest Eu 4f state, and the result is in good agreement with experimental value within experimental Eu{sup 2+} doping range. - Graphical abstract: The structure and optical property of BaSi{sub 2}O{sub 2}N{sub 2}:Eu{sup 2+} are computed by DFT and its absorption mechanism is analysed. Results show that absorption peak α is from the host lattice absorption. The absorption peaks β, γ and δ are from Eu 4f to Eu 5d and Ba 6s 5d states. The absorption is attributed to the coupling effect of Eu and Ba atom. - Highlights: • The crystal, electronic structure and optical properties of BaSi{sub 2}O{sub 2}N{sub 2}:Eu{sup 2+} are computed by DFT. • The lattice parameters of primitive cells reduces and Eu–N bond length shortens as Eu{sup 2+} increases. • The energy gap from Eu 5d state to Eu 4f state decrease with increasing Eu concentrations. • Both Eu and Ba atoms contributes to the absorption of Ba{sub 1−x}Si{sub 2}O{sub 2}N{sub 2}:Eu{sub x}. • The deduced emission wavelength is in good agreement with experimental value.« less

  15. Nanophotonic biosensor for space exploration (PBSA instrument)

    NASA Astrophysics Data System (ADS)

    Pantoja, S.; Parro, V.; Nestler, J.; Geidel, S.; Martins, R.; Cuesta, F.; Elvira, J. G.; Sousa, A.

    2017-11-01

    One of the biggest challenges of Astrobiology is the search for clear signs of present or past life on other planetary bodies. Thus, this poster will describe the project "Photonic Biosensor for Space Application" (PBSA, www.pbsa-fp7.eu) founded by the Directorate-General for Enterprise and Industry (DG ENTR) within the European Commission and managed by the Unit S2 (Space Research) of the Research European Agency (REA).

  16. "Sport & Exercise Pedagogy". The Case for a New Integrative Sub-Discipline in the Field of Sport & Exercise Sciences/Kinesiology/Human Movement Sciences

    ERIC Educational Resources Information Center

    Armour, Kathleen M.; Chambers, Fiona C.

    2014-01-01

    The European Union Sport Unit has identified the societal and educational role of sport as a central topic in its new research agenda. It is argued that European Union (EU) citizens should be supported to learn continuously across the life course. In the sport/physical activity (PA) context, the role of teachers, coaches and exercise instructors…

  17. The European Union’s Reform Process: The Libson Treaty

    DTIC Science & Technology

    2010-02-22

    group: Denmark, Ireland, and the United Kingdom joined in 1973; Greece in 1981; Portugal and Spain in 1986; and Austria, Finland , and Sweden in 1995...1 The member countries of the EU are Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland ... double majority” system is to be introduced in 2014 (instead of 2009-2010), gradually phased in over three years, and not fully implemented until

  18. Development of a pest risk analysis for Phytophthora ramorum for the European Union; the key deliverable from the EU-Funded project RAPRA

    Treesearch

    Claire Sansford; Alan Inman; Joan Webber

    2010-01-01

    Pest Risk Analysis (PRA) is an internationally recognized, structured process of determining whether plant pests and pathogens that are absent from a country or area could enter, establish, and cause an economic or environmental risk that is deemed unacceptable. PRA is also used to help identify phytosanitary measures to reduce risks to an acceptable level. United...

  19. Experimental comparison between R409A and R437A performance in a heat pump unit

    NASA Astrophysics Data System (ADS)

    Duarte, M. V.; Pires, L. C.; Silva, P. D.; Gaspar, P. D.

    2017-04-01

    This paper reports an experimental comparison between the use of the refrigerants R409A and R437A in a heat pump unit designed and developed to work with R12. Although the use of both refrigerants in new equipments were abolished in EU and US according the new F-Gas Regulation of EU and SNAP, they still being used as options for R12 in old equipments, especially in developing countries. Both refrigerants were studied for the same test conditions, according to two groups of tests: group A (variation of the heat source temperature) and group B (variation of refrigerant flow rate). The results obtained showed that the R437A presents a higher discharge pressure and a lower discharge temperature. The heating and cooling capacities of both refrigerants were similar, as well as the exergetic efficiency. For the group A of tests the COP of both refrigerants was similar and for the group B of tests the R409A presented an average COP 15% higher. According to the results obtained it is recommended the use of R409A in old equipments (as transition refrigerant) until the acquisition of equipments operating with refrigerants with low-GWP becomes technically and economic feasible.

  20. Lanthanide luminescent displacement assays: the sensing of phosphate anions using Eu(III)-cyclen-conjugated gold nanoparticles in aqueous solution.

    PubMed

    Massue, Julien; Quinn, Susan J; Gunnlaugsson, Thorfinnur

    2008-06-04

    1.Eu, a cyclen based Eu(III)-thiol conjugate, was incorporated onto the surface of water-soluble gold nanoparticles to give AuNP-1.Eu. The self-assembly between AuNP-1.Eu and the antenna 2 resulted in the formation of the highly luminescent lanthanide system, AuNP-1.Eu-2, at pH 7.4. The sensing of flavin monophosphate 3 is demonstrated, whereby 3 displaced the antenna 2 in AuNP-1.Eu-2, resulting in the formation of AuNP-1.Eu-3 and quenching of the Eu(III) emission.

  1. Eu 2+ –Eu 3+ valence transition in double, Eu-, and Na-doped PbSe from transport, magnetic, and electronic structure studies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wiendlocha, Bartlomiej; Kim, SunPhil; Lee, Yeseul

    The Eu atoms in Pb 1-xEu xSe have long been assumed to be divalent. We show that p-type doping of this magnetic semiconductor alloy with Na can modify the effective Eu valence: a mixed, Eu 2+–Eu 3+ state appears in Pb 1-x-yEu xNa ySe at particular values of y. Magnetization, carrier concentration, resistivity, and thermopower of Pb 1-x-yEu xNa ySe are reported for a number of samples with different x and y. A pronounced increase in thermopower at a given carrier concentration was identified and attributed to the presence of enhanced ionized impurity scattering. A strong decrease in the holemore » concentration is observed in Pb1-yNaySe when Eu is added to the system, which we attribute to a Eu 2+–Eu 3+ self-ionization process. This is evidenced by magnetization measurements, which reveal a significant reduction of the magnetic moment of Pb 1-xEu xSe upon alloying with Na. Further, a deviation of magnetization from a purely paramagnetic state, described by a Brillouin function, identifies antiferromagnetic interactions between the nearest-neighbor Eu atoms: a value of J ex/k B = -0.35 K was found for the exchange coupling parameter. The conclusion of a Eu 2+–Eu 3+ self-ionization process being in effect is supported further by the electronic structure calculations, which show that an instability of the 4f 7 configuration of the Eu 2+ ion appears with Na doping. In conclusion, schematically, it was found that the Eu 4f levels form states near enough to the Fermi energy that hole doping can lower the Fermi energy and trigger a reconfiguration of a 4f electronic shell.« less

  2. Eu 2+ –Eu 3+ valence transition in double, Eu-, and Na-doped PbSe from transport, magnetic, and electronic structure studies

    DOE PAGES

    Wiendlocha, Bartlomiej; Kim, SunPhil; Lee, Yeseul; ...

    2017-03-27

    The Eu atoms in Pb 1-xEu xSe have long been assumed to be divalent. We show that p-type doping of this magnetic semiconductor alloy with Na can modify the effective Eu valence: a mixed, Eu 2+–Eu 3+ state appears in Pb 1-x-yEu xNa ySe at particular values of y. Magnetization, carrier concentration, resistivity, and thermopower of Pb 1-x-yEu xNa ySe are reported for a number of samples with different x and y. A pronounced increase in thermopower at a given carrier concentration was identified and attributed to the presence of enhanced ionized impurity scattering. A strong decrease in the holemore » concentration is observed in Pb1-yNaySe when Eu is added to the system, which we attribute to a Eu 2+–Eu 3+ self-ionization process. This is evidenced by magnetization measurements, which reveal a significant reduction of the magnetic moment of Pb 1-xEu xSe upon alloying with Na. Further, a deviation of magnetization from a purely paramagnetic state, described by a Brillouin function, identifies antiferromagnetic interactions between the nearest-neighbor Eu atoms: a value of J ex/k B = -0.35 K was found for the exchange coupling parameter. The conclusion of a Eu 2+–Eu 3+ self-ionization process being in effect is supported further by the electronic structure calculations, which show that an instability of the 4f 7 configuration of the Eu 2+ ion appears with Na doping. In conclusion, schematically, it was found that the Eu 4f levels form states near enough to the Fermi energy that hole doping can lower the Fermi energy and trigger a reconfiguration of a 4f electronic shell.« less

  3. A study experiment of auto idle application in the excavator engine performance

    NASA Astrophysics Data System (ADS)

    Purwanto, Wawan; Maksum, Hasan; Putra, Dwi Sudarno; Azmi, Meri; Wahyudi, Retno

    2016-03-01

    The purpose of this study was to analyze the effect of applying auto idle to excavator engine performance, such as machine unitization and fuel consumption in Excavator. Steps to be done are to modify the system JA 44 and 67 in Vehicle Electronic Control Unit (V-ECU). The modifications will be obtained from the pattern of the engine speed. If the excavator attachment is not operated, the engine speed will return to the idle speed automatically. From the experiment results the auto idle reduces fuel consumption in excavator engine.

  4. A study experiment of auto idle application in the excavator engine performance

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Purwanto, Wawan, E-mail: wawan5527@gmail.com; Maksum, Hasan; Putra, Dwi Sudarno, E-mail: dwisudarnoputra@ft.unp.ac.id

    2016-03-29

    The purpose of this study was to analyze the effect of applying auto idle to excavator engine performance, such as machine unitization and fuel consumption in Excavator. Steps to be done are to modify the system JA 44 and 67 in Vehicle Electronic Control Unit (V-ECU). The modifications will be obtained from the pattern of the engine speed. If the excavator attachment is not operated, the engine speed will return to the idle speed automatically. From the experiment results the auto idle reduces fuel consumption in excavator engine.

  5. Use of the LITEE Lorn Manufacturing Case Study in a Senior Chemical Engineering Unit Operations Laboratory

    ERIC Educational Resources Information Center

    Abraham, Nithin Susan; Abulencia, James Patrick

    2011-01-01

    This study focuses on the effectiveness of incorporating the Laboratory for Innovative Technology and Engineering Education (LITEE) Lorn Manufacturing case into a senior level chemical engineering unit operations course at Manhattan College. The purpose of using the case study is to demonstrate the relevance of ethics to chemical engineering…

  6. The Supply and Demand of Technology and Engineering Teachers in the United States: Who Knows?

    ERIC Educational Resources Information Center

    Moye, Johnny J.

    2017-01-01

    The purpose of this study was to determine the supply and demand of technology and engineering teachers in the United States. Once gathered, the resulting data (that was available) was compared to previous studies to determine trends. The researcher reviewed the 2010-11 through 2015-16 Technology & Engineering Teacher Education Directories. To…

  7. Synthesis and effect of Ce and Mn co-doping on photoluminescence characteristics of Ca6AlP5O20:Eu novel phosphors.

    PubMed

    Shinde, K N; Dhoble, S J

    2013-01-01

    A series of Ca6AlP5O20 doped with rare earths (Eu and Ce) and co-doped (Eu, Ce and Eu,Mn) were prepared by combustion synthesis. Under Hg-free excitation, Ca6AlP5O20:Eu exhibited Eu(2+) (486 nm) emission in the blue region of the spectrum and under near Hg excitation (245 nm), Ca6AlP5O20:Ce phosphor exhibited Ce(3+) emission (357 nm) in the UV range. Photoluminescence (PL) peak intensity increased in Ca6AlP5O20:Eu,Ce and Ca6AlP5O20:Eu, Mn phosphors due to co-activators of Ce(3+) and Mn(2+) ions. As a result, these ions played an important role in PL emission in the present matrix. Ca6AlP5O20:Eu, Ce and Ca6AlP5O20:Eu, Mn phosphors provided energy transfer mechanisms via Ce(3+) → Eu(2+) and Eu(2+) → Mn(2+), respectively. Eu ions acted as activators and Ce ions acted as sensitizers. Ce emission energy was well matched with Eu excitation energy in the case of Ca6AlP5O20:Eu, Ce and Eu ions acted as activators and Mn ions acted as sensitizers in Ca6AlP5O20:Eu, Mn. This study included synthesis of new and efficient phosphate phosphors. The impact of doping and co-doping on photoluminescence properties and energy transfer mechanisms were investigated and we propose a feasible interpretation. Copyright © 2012 John Wiley & Sons, Ltd.

  8. Controlled synthesis of Eu 2+ and Eu 3+ doped ZnS quantum dots and their photovoltaic and magnetic properties

    DOE PAGES

    Horoz, Sabit; Yakami, Baichhabi; Poudyal, Uma; ...

    2016-04-27

    Eu-doped ZnS quantum dots (QDs) have been synthesized by wet-chemical method and found to form in zinc blende (cubic) structure. Both Eu 2+ and Eu 3+ doped ZnS can be controllably synthesized. The Eu 2+ doped ZnS QDs show broad photoluminescence emission peak around 512 nm, which is from the Eu2+ intra-ion transition of 4f 6d1 – 4f 7, while the Eu 3+ doped samples exhibit narrow emission lines characteristic of transitions between the 4f levels. The investigation of the magnetic properties shows that the Eu 3+ doped samples exhibit signs of ferromagnetism, on the other hand, Eu 2+ dopedmore » samples are paramagnetic of Curie-Weiss type. The incident photon to electron conversion efficiency is increased with the Eu doping, which suggests the QD solar cell efficiency can be enhanced by Eu doping due to widened absorption windows. This is an attractive approach to utilize benign and environmentally friendly wide band gap ZnS QDs in solar cell technology.« less

  9. Abnormal Eu behavior at formation of H2O- and Cl-bearing fluids during degassing of granite magmas

    NASA Astrophysics Data System (ADS)

    Lukanin, Oleg

    2010-05-01

    One of the important features of REE behavior in the process of decompression degassing of granite melts is the presence of europium anomalies in REE spectrum of forming fluid phase. Negative Eu anomaly in REE spectrum of fluids enriched by chlorine that were formed under high pressures at early stages of degassing relative to REE spectrum of granite melts may take place. Negative Eu anomaly in fluid is replaced by positive one with pressure decrease and decline of Cl concentration in fluid [1, 2]. Observable unique features of europium redistribution between fluid and melt find an explanation in such a fact that Eu in contrast to the other REE under oxidation-reduction conditions, being typical for magmatic process, is present in acidic silica-alumina melts in two valency forms Eu3+ and Eu2+ whereas the dominant form for the other REE in such a melts is (REE)3+ [3, 4]. From the analysis of melt-fluid exchange reactions with participation of two valency forms of europium Eu3+ and Eu2+ follows that the total distribution coefficient of Eu between fluid and melt D(Eu)f-m is equal as a first approximation to [5, 6]: D(Eu)f-m = a1α [C(Cl)f]3 + a2 (1 - α)[C(Cl)f]2, where C(Cl)f - the concentration of Cl in fluid, α = Eu3+/(Eu3+ + Eu2+), i.e. fraction of Eu3+ from the general amount of europium in the melt, and, a1anda2- constants that can be approximately estimated from empirical data upon Eu fluid/melt distribution. The equation given allows to estimate the influence of oxidizing condition of europium on sign and size of Eu anomaly, which is expressed by Eu/Eu# ratio, where Eu is real concentration of europium in fluid being in equilibrium with melt with constant Eu3+/(Eu3+ + Eu2+) ratio, and Eu# is possible "virtual" concentration of europium that could be in the same fluid provided that all europium as other REE as well were exclusively present in trivalent form. The sign and size of Eu anomaly in fluid depends upon Cl concentration in fluid and Eu3+/Eu2+ ratio in melt. The abnormal behavior of Eu shows itself the stronger, the lower fO2and, accordingly, the more fraction of Eu2+is present in melt. The work is supported of the Geosciences Department of the Russian Academy of Science (the program 2- 2010) and RFBR (grant 08-05-00022). References [1] Reed M.J., Candela Ph.A., Piccoli Ph.M. Contrib. Mineral. Petrol. 2000. V. 140. P. 251-262. [2] Lukanin O.A., Dernov-Pegarev V.F. Vestnik Otd. Nauk Zemle RAN, No 1(25)'2007 URL: http://www.scgis.ru/russian/cp1251/h_dgggms/1-2007/informbul-1_2007/term-30e.pdf [3] Drake M.J. Geochim. Cosmochim. Acta. 1975. V. 39. P. 55-64. [4] Wilke M. Behrens H. Contrib. Mineral. Petrol. 1999. V. 137. P. 102-114. [5] Lukanin O.A. Vestnik Otd. Nauk o Zemle RAN, No 1(26)'2008. URL: http://www.scgis.ru/russian/cp1251/h_dgggms/1-2008/informbul-1_2008/magm-20e.pdf [6] Lukanin O.A., Dernov-Pegarev V.F. Geochemistry International, 2010 (in press)

  10. Status of the Body of Knowledge and Curriculum to Advance Systems Engineering (BKCASE (trademark)) Project

    DTIC Science & Technology

    2011-10-01

    Systems engineer- ing knowledge has also been documented through the standards bodies, most notably : • ISO /IEC/IEEE 15288, Systems Engineer- ing...System Life Cycle Processes, 2008 (see [10]). • ANSI/EIA 632, Processes for Engineering a System, (1998) • IEEE 1220, ISO /IEC 26702 Application...tion • United States Defense Acquisition Guidebook, Chapter 4, June 27, 2011 • IEEE/EIA 12207 , Software Life Cycle Processes, 2008 • United

  11. Soil radium, soil gas radon and indoor radon empirical relationships to assist in post-closure impact assessment related to near-surface radioactive waste disposal.

    PubMed

    Appleton, J D; Cave, M R; Miles, J C H; Sumerling, T J

    2011-03-01

    Least squares (LS), Theil's (TS) and weighted total least squares (WTLS) regression analysis methods are used to develop empirical relationships between radium in the ground, radon in soil and radon in dwellings to assist in the post-closure assessment of indoor radon related to near-surface radioactive waste disposal at the Low Level Waste Repository in England. The data sets used are (i) estimated ²²⁶Ra in the < 2 mm fraction of topsoils (eRa226) derived from equivalent uranium (eU) from airborne gamma spectrometry data, (ii) eRa226 derived from measurements of uranium in soil geochemical samples, (iii) soil gas radon and (iv) indoor radon data. For models comparing indoor radon and (i) eRa226 derived from airborne eU data and (ii) soil gas radon data, some of the geological groupings have significant slopes. For these groupings there is reasonable agreement in slope and intercept between the three regression analysis methods (LS, TS and WTLS). Relationships between radon in dwellings and radium in the ground or radon in soil differ depending on the characteristics of the underlying geological units, with more permeable units having steeper slopes and higher indoor radon concentrations for a given radium or soil gas radon concentration in the ground. The regression models comparing indoor radon with soil gas radon have intercepts close to 5 Bq m⁻³ whilst the intercepts for those comparing indoor radon with eRa226 from airborne eU vary from about 20 Bq m⁻³ for a moderately permeable geological unit to about 40 Bq m⁻³ for highly permeable limestone, implying unrealistically high contributions to indoor radon from sources other than the ground. An intercept value of 5 Bq m⁻³ is assumed as an appropriate mean value for the UK for sources of indoor radon other than radon from the ground, based on examination of UK data. Comparison with published data used to derive an average indoor radon: soil ²²⁶Ra ratio shows that whereas the published data are generally clustered with no obvious correlation, the data from this study have substantially different relationships depending largely on the permeability of the underlying geology. Models for the relatively impermeable geological units plot parallel to the average indoor radon: soil ²²⁶Ra model but with lower indoor radon: soil ²²⁶Ra ratios, whilst the models for the permeable geological units plot parallel to the average indoor radon: soil ²²⁶Ra model but with higher than average indoor radon: soil ²²⁶Ra ratios. Copyright © 2010 Natural Environment Research Council. Published by Elsevier Ltd.. All rights reserved.

  12. Correlates of self-reported exposure to advertising of tobacco products and electronic cigarettes across 28 European Union member states

    PubMed Central

    Filippidis, Filippos T; Laverty, Anthony A; Fernandez, Esteve; Mons, Ute; Tigova, Olena; Vardavas, Constantine I

    2017-01-01

    Background Despite advertising bans in most European Union (EU) member states, outlets for promotion of tobacco products and especially e-cigarettes still exist. This study aimed to assess the correlates of self-reported exposure to tobacco products and e-cigarettee advertising in the EU. Methods We analysed data from wave 82.4 of the Eurobarometer survey (November–December 2014), collected through interviews in 28 EU member states (n=27 801 aged ≥15 years) and data on bans of tobacco advertising extracted from the Tobacco Control Scale (TCS, 2013). We used multilevel logistic regression to assess sociodemographic correlates of self-reported exposure to any tobacco and e-cigarette advertisements. Results 40% and 41.5% of the respondents reported having seen any e-cigarette and tobacco product advertisement respectively within the past year. Current smokers, males, younger respondents, those with financial difficulties, people who had tried e-cigarettes and daily internet users were more likely to report having seen an e-cigarette and a tobacco product advertisement. Respondents in countries with more comprehensive advertising bans were less likely to self-report exposure to any tobacco advertisements (OR 0.87; 95% CI 0.79 to 0.96 for one-unit increase in TCS advertising score), but not e-cigarette advertisements (OR 1.08; 95% CI 0.95 to 1.22). Conclusion Ten years after ratification of the Framework Convention for Tobacco Control, self-reported exposure to tobacco and e-cigarette advertising in the EU is higher in e-cigarette and tobacco users, as well as those with internet access. The implementation of the Tobacco Products Directive may result in significant changes in e-cigarette advertising, therefore improved monitoring of advertising exposure is required in the coming years. PMID:28607098

  13. Relationship of secondhand smoke exposure with sociodemographic factors and smoke-free legislation in the European Union.

    PubMed

    Filippidis, Filippos T; Agaku, Israel T; Girvalaki, Charis; Jiménez-Ruiz, Carlos; Ward, Brian; Gratziou, Christina; Vardavas, Constantine I

    2016-04-01

    To explore whether exposure to secondhand smoke (SHS) among non-smokers in the European Union (EU) showed any association with sociodemographic factors and/or the extent of national tobacco control policies. A secondary analysis was performed on data from 26 751 individuals ≥15 years old from 27 EU member states (EU MS), collected during the 2012 Special Eurobarometer survey (wave 77.1). Respondents were asked whether they had been exposed to SHS in eating or drinking establishments during the past 6 months, and/or in their workplace. Data on smoke-free policies were extracted from the European Tobacco Control Status Report and the European Tobacco Control Scale (TCS) in 2013. In total, 29.0% of non-smoking participants reported being exposed to SHS in indoor areas. Males (vs. females) as well as individuals with difficulties to pay bills (vs. those with no difficulties), had significantly greater odds of being exposed to SHS in bars, restaurants and workplaces. For every unit increase of a country's score on the Smoke-free Component of the TCS (indicating greater adherence to smoke-free legislations) the odds ratio of reporting exposure to SHS was 0.82 in bars, 0.85 in restaurants and 0.94 in workplaces. Differences in exposure to SHS clearly exist between and within EU MS, despite the fact that they all have signed the Framework Convention on Tobacco Control, with the burden found to disproportionally affect younger people and individuals with financial difficulties. Moreover, enforcement of smoke-free legislation was inversely associated with SHS exposure, highlighting the importance of enforcing comprehensive smoking bans. © The Author 2015. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

  14. Shoot Development and Extension of Quercus serrata Saplings in Response to Insect Damage and Nutrient Conditions

    PubMed Central

    MIZUMACHI, ERI; MORI, AKIRA; OSAWA, NAOYA; AKIYAMA, REIKO; TOKUCHI, NAOKO

    2006-01-01

    • Background and Aims Plants have the ability to compensate for damage caused by herbivores. This is important to plant growth, because a plant cannot always avoid damage, even if it has developed defence mechanisms against herbivores. In previous work, we elucidated the herbivory-induced compensatory response of Quercus (at both the individual shoot and whole sapling levels) in both low- and high-nutrient conditions throughout one growing season. In this study, we determine how the compensatory growth of Quercus serrata saplings is achieved at different nutrient levels. • Methods Quercus serrata saplings were grown under controlled conditions. Length, number of leaves and percentage of leaf area lost on all extension units (EUs) were measured. • Key Results Both the probability of flushing and the length of subsequent EUs significantly increased with an increase in the length of the parent EU. The probability of flushing increased with an increase in leaf damage of the parent EU, but the length of subsequent EUs decreased. This indicates that EU growth is fundamentally regulated at the individual EU level. The probabilities of a second and third flush were significantly higher in plants in high-nutrient soil than those in low-nutrient soil. The subsequent EUs of damaged saplings were also significantly longer at high-nutrient conditions. • Conclusions An increase in the probability of flushes in response to herbivore damage is important for damaged saplings to produce new EUs; further, shortening the length of EUs helps to effectively reproduce foliage lost by herbivory. The probability of flushing also varied according to soil nutrient levels, suggesting that the compensatory growth of individual EUs in response to local damage levels is affected by the nutrients available to the whole sapling. PMID:16709576

  15. Pepino mosaic virus genotype shift in North America and development of a loop-mediated isothermal amplification for rapid genotype identification

    PubMed Central

    2013-01-01

    Background Pepino mosaic, once an emerging disease a decade ago, has become endemic on greenhouse tomatoes worldwide in recent years. Three distinct genotypes of Pepino mosaic virus (PepMV), including EU, US1 and CH2 have been recognized. Our earlier study conducted in 2006–2007 demonstrated a predominant EU genotype in Canada and United States. The objective of the present study was to monitor the dynamic of PepMV genetic composition and its current status in North America. Results Through yearly monitoring efforts in 2009–2012, we detected a dramatic shift in the prevalent genotype of PepMV from the genotype EU to CH2 in North America since early 2010, with another shift from CH2 to US1 occurring in Mexico only two years later. Through genetic diversity analysis using the coat protein gene, such genotype shifting of PepMV in North America was linked to the positive identification of similar sequence variants in two different commercial tomato seed sources used for scion and rootstock, respectively. To allow for a quick identification, a reverse transcription loop-mediated isothermal amplification (RT-LAMP) system was developed and demonstrated to achieve a rapid identification for each of the three genotypes of PepMV, EU, US1 and CH2. Conclusion Through systemic yearly monitoring and genetic diversity analysis, we identified a linkage between the field epidemic isolates and those from commercial tomato seed lots as the likely sources of initial PepMV inoculum that resulted in genetic shifting as observed on greenhouse tomatoes in North America. Application of the genotype-specific RT-LAMP system would allow growers to efficiently determine the genetic diversity on their crops. PMID:23587202

  16. Considerations for an institution for evaluation of diabetes technology devices to improve their quality in the European Union.

    PubMed

    Heinemann, Lutz; Freckmann, Guido; Koschinsky, Theodor

    2013-03-01

    All medical devices used for self-monitoring of blood glucose (BG), insulin injection, continuous subcutaneous insulin infusion, and continuous glucose monitoring in the European Union (EU) must have a Communauté Européenne (CE) mark. However, the approval process for obtaining this mark is different from that used by the European Medicines Agency in the EU for drugs or by the Food and Drug Administration in the United States for such medical and in vitro diagnostic devices. The notified bodies involved in the CE mark process perform this evaluation in cooperation with the manufacturers. They have only limited diabetes know-how; they have to handle all kinds of medical devices. There are devices for therapy on the market in the EU (i.e., they have market approval) that do not fulfill quality requirements, as indicated, for example, in the international norm ISO 15197 for BG test systems. Evaluation of the performance of such systems is usually provided by the manufacturers. What is missing in the EU is an independent institution that performs regular and critical evaluation of the quality of devices used for diabetes therapy before and also after their market approval. The work of such an institution would focus on BG test systems (these represent two-thirds of the market of medical devices for diabetes treatment) but would also evaluate the performance of other devices. It has to be clarified what legal framework is required for such an institution and how it can be financed; probably this can be done in a shared manner by the manufacturers of such devices and the health insurance companies. Positive evaluation results should be a prerequisite prior to any reimbursement for such devices. © 2013 Diabetes Technology Society.

  17. Natural Radioactivity in Groundwater from the Negev, Israel

    NASA Astrophysics Data System (ADS)

    Pery, N.; Vengosh, A.; Haqin, G.; Paytan, A.; Elhanani, S.; Pankratov, I.; Broshi, L.; Yungreiss, Z.; Gazit-Yaari, N.

    2004-12-01

    As most of the groundwater basins in the Middle East are being diminished or contaminated, exploitation of the deep aquifers referred as the "Nubian Sandstone" from the Paleozoic and Lower Cretaceous sandstone units is increasing. In many basins across the Sahara and Sahel regions, the Arabian peninsula, Gulf States, Jordan, and Israel the fossil groundwater are the only available water resource. Natural radioactivity is an important water quality factor of groundwater from this aquifer.Systematic analyses of radium isotopes (226Ra,228Ra,224Ra,223Ra) in over sixty groundwater samples from the Negev and Arava Valley, Israel, reveal that a large number of the pumping wells exceeds the international drinking water regulations as regulated by the USEPA and the European Community (EU). In the Lower Cretaceous Nubian sandstone (Kurnob Group) aquifer 26 out of the 29 (90%) investigated wells are having radium activity above the EU and the EPA regulations. Excluding the activity of the shorted-live 224Ra isotopes (half life of 3.6 days) the fraction of wells with activity above the EU regulation reduces to 79%. In the overlying Upper Cretaceous carbonate (Judea Group) aquifer the numbers of wells with activity exceeding the EU and EPA drinking regulations are 9 (39%) and 11 (48%) out of 23. In the carbonate aquifer we observed a linear correlation between 226Ra activity and salinity whereas in the sandstone aquifer the 228Ra isotopes is predominated and no relationship with salinity was found. Our results clearly indicate that high activity of radium, even low saline groundwater, play a key role in exploitation and water utilization for domestic and agriculture applications.

  18. Metal-insulator transition in Nd(1-x)Eu(x)NiO(3) compounds.

    PubMed

    Escote, M T; Barbeta, V B; Jardim, R F; Campo, J

    2006-07-05

    Polycrystalline Nd(1-x)Eu(x)NiO(3) (0≤x≤0.5) compounds were synthesized in order to investigate the character of the metal-insulator (MI) phase transition in this series. Samples were prepared through the sol-gel route and subjected to heat treatments at ∼1000 °C under oxygen pressures as high as 80 bar. X-ray diffraction (XRD) and neutron powder diffraction (NPD), electrical resistivity ρ(T), and magnetization M(T) measurements were performed on these compounds. The NPD and XRD results indicated that the samples crystallize in an orthorhombic distorted perovskite structure, space group Pbnm. The analysis of the structural parameters revealed a sudden and small expansion of ∼0.2% of the unit cell volume when electronic localization occurs. This expansion was attributed to a small increase of ∼0.003 Å of the average Ni-O distance and a simultaneous decrease of ∼-0.5° of the Ni-O-Ni superexchange angle. The ρ(T) measurements revealed a MI transition occurring at temperatures ranging from T(MI)∼193 to 336 K for samples with x = 0 and 0.50, respectively. These measurements also show a large thermal hysteresis in NdNiO(3) during heating and cooling processes, suggesting a first-order character of the phase transition at T(MI). The width of this thermal hysteresis was found to decrease appreciably for the sample Nd(0.7)Eu(0.3)NiO(3). The results indicate that cation disorder associated with increasing substitution of Nd by Eu is responsible for changing the first-order character of the transition in NdNiO(3).

  19. Is public health between East and West? Analysis of wealth, health and mortality in Austria, Central and Eastern European Countries and Croatia relative to the European Union.

    PubMed

    Hofmarcher, M M

    1998-09-01

    To provide a conceptual framework for health planning activities in the "middle income" transition countries. Economic, demographic, and disease-related data in Central and Eastern European (CEE) countries, including Croatia and Austria, were compared to the Europen Union (EU) average. Data were selected from the databases provided by the World Health Organization, Organization for Economic Cooperation and Development, World Bank, United Nations, and the European Bank of Reconstruction and Development. Life expectancy and mortality were extrapolated until the year 2000 by using an exponential growth model for the WHO time series data, starting in 1994. Death rates due to ischemic heart diseases (18%) and cerebrovascular diseases (13%) were selected to show frequent causes of death. Relative to the EU average, the gross domestic product (GDP) share of health expenditures in transition countries was disproportionate to wealth and premature death. The population in CEE-countries was younger and the share of people aged >65 was predicted to remain about 15% below the EU average and Austria. For Croatia, the share of people aged 65 would be on the increase, similar to the share predicted for Austria (slightly above the EU average). Mortality of selected non-communicable, chronic diseases is predicted to increase and remain relatively high. Mortality rates due to infectious diseases have been declining but remained comparatively on a high level. Coexistence of demographic and epidemiological transition along with high mortality rates due to infectious diseases creates a "double burden". Economic transition has the potential to comprise both the increase in wealth, and life and health expectancy.

  20. Health-related quality of life in patients with metastatic renal cell carcinoma treated with sunitinib vs interferon-alpha in a phase III trial: final results and geographical analysis.

    PubMed

    Cella, D; Michaelson, M D; Bushmakin, A G; Cappelleri, J C; Charbonneau, C; Kim, S T; Li, J Z; Motzer, R J

    2010-02-16

    In a randomised phase III trial, sunitinib significantly improved efficacy over interferon-alpha (IFN-alpha) as first-line therapy for metastatic renal cell carcinoma (mRCC). We report the final health-related quality of life (HRQoL) results. Patients (n=750) received oral sunitinib 50 mg per day in 6-week cycles (4 weeks on, 2 weeks off treatment) or subcutaneous IFN-alpha 9 million units three times weekly. Health-related quality of life was assessed with nine end points: the Functional Assessment of Cancer Therapy-General and its four subscales, FACT-Kidney Symptom Index (FKSI-15) and its Disease-Related Symptoms subscale (FKSI-DRS), and EQ-5D questionnaire's EQ-5D Index and visual analogue scale. Data were analysed using mixed-effects model (MM), supplemented with pattern-mixture models (PMM), for the total sample and the US and European Union (EU) subgroups. Patients receiving sunitinib reported better scores in the primary end point, FKSI-DRS, across all patient populations (P<0.05), and in nine, five, and six end points in the total sample, in the US and EU groups respectively (P<0.05). There were no significant differences between the US and EU groups for all end points with the exception of the FKSI item 'I am bothered by side effects of treatment' (P=0.02). In general, MM and PMM results were similar. Patients treated with sunitinib in this study had improved HRQoL, compared with patients treated with IFN-alpha. Treatment differences within the US cohort did not differ from those within the EU cohort.

  1. Incorporation of public hospitals: a "silver bullet" against overcapacity, managerial bottlenecks and resource constraints? Case studies from Austria and Estonia.

    PubMed

    Fidler, Armin H; Haslinger, Reinhard R; Hofmarcher, Maria M; Jesse, Maris; Palu, Toomas

    2007-05-01

    This paper presents a new approach for incorporating public hospitals by contrasting the experience from an "old" EU country (Austria) with a new EU member state (Estonia). In the EU (including the new member states) hospital overcapacity is a serious problem, from a technical, fiscal and political perspective. Few countries have succeeded in establishing an appropriate framework for resource management and for guaranteeing long-term financial viability of their hospital network. Many countries are in search of effective policies for improved hospital management and more cost-effective resource use in the health sector. Over the past decade, experiences in Austria and Estonia have emerged as innovative examples which may provide lessons for other EU countries and beyond. This paper describes the evolution of public hospitals from public budgetary units and public management to incorporated autonomous organizations under private corporate law, resulting in a contractual relationship between (public) owners and private hospital management. Outdated and inefficient public sector structures were replaced by more agile corporate management. The arrangement allows for investments, operating costs and budgeting according to strategic business goals as opposed to political "fiat". Shielding hospitals from local political influence is an important aspect of this concept. Horizontal integration through networking of public hospitals and introducing private management helps create a new corporate culture, allowing for more flexibility to achieve efficiencies through downsizing and economies of scale. Based on contracts the new balance between ownership and managerial functions create strong incentives for a more business-like, results-oriented and consumer-friendly management. This was achieved both in Austria and Estonia in a politically sensitive way, adopting a long-term vision and by protecting the interests of hospital owners and staff.

  2. A series of Ln-p-chlorobenzoic acid–terpyridine complexes: lanthanide contraction effects, supramolecular interactions and luminescent behavior

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Carter, Korey P.; Pope, Simon J. A.; Cahill, Christopher L.

    Fifteen new lanthanide p-chlorobenzoic acid complexes, [PrL3(terpy)(H2O)]2 (1), [LnL3(terpy)(H2O)]2 (Ln = Nd (2), Sm (3), and Eu (4)), and [LnL3(terpy)(H2O)] (Ln = Sm (3'), Eu (4'), Gd (5), Tb (6), Dy (7), Ho (8), Er (9), Tm (10), Yb (11), Lu (12), and Y (13); HL: p-chlorobenzoic acid; terpy: 2,2':6',2''-terpyridine), have been synthesized hydrothermally at varying temperatures and structurally characterized by single crystal and powder X-ray diffraction. The series is comprised of binuclear molecular units (Pr–Eu) that give way to mononuclear molecular complexes (Sm–Y) as the lanthanide contraction takes effect. All fifteen complexes feature a tridentate terpyridine ligand, p-chlorobenzoic acidmore » ligands exhibiting multiple binding modes, bidentate, bridging bidentate, and monodentate, and a bound water molecule. Binuclear complexes 1–4 are stitched together via intermolecular interactions: aromatic–aromatic interactions for 1, halogen•••halogen interactions for 2–4, to form 1D chains. Mononuclear complexes 3', 4', and 5–13 utilize supramolecular hydrogen and halogen bonding to form 2D sheets. Visible and near-IR solid state luminescence studies were performed on complexes 2, 3, 3', 4, 4', 6, 7 and 11 and the characteristic visible luminescence of Sm(III), Eu(III), Tb(III), and Dy(III) was exhibited. The near-IR spectra of the Nd(III) and Yb(III) complexes exhibit weak characteristic luminescence, showing that terpy can act as a sensitizing chromophore in these systems.« less

  3. A Study on Aircraft Engine Control Systems for Integrated Flight and Propulsion Control

    NASA Astrophysics Data System (ADS)

    Yamane, Hideaki; Matsunaga, Yasushi; Kusakawa, Takeshi

    A flyable FADEC system engineering model incorporating Integrated Flight and Propulsion Control (IFPC) concept is developed for a highly maneuverable aircraft and a fighter-class engine. An overview of the FADEC system and functional assignments for its components such as the Engine Control Unit (ECU) and the Integrated Control Unit (ICU) are described. Overall system reliability analysis, convex analysis and multivariable controller design for the engine, fault detection/redundancy management, and response characteristics of a fuel system are addressed. The engine control performance of the FADEC is demonstrated by hardware-in-the-loop simulation for fast acceleration and thrust transient characteristics.

  4. Effects of Eu doping and O vacancy on the magnetic and optical properties of ZnO

    NASA Astrophysics Data System (ADS)

    Ling-Feng, Qu; Qing-Yu, Hou; Xiao-Fang, Jia; Zhen-Chao, Xu; Chun-Wang, Zhao

    2018-02-01

    We calculated the electronic structure and optical properties of Eu mono-doped ZnO systems with or without O vacancy. We also determined the relative energy of ferromagnetic and antiferromagnetic orders of Eu-double-doped ZnO systems. The double-doped systems possess high Curie temperature and achieve room temperature ferromagnetism. The magnetism in the Eu mono-doped system without O vacancy is caused by the -Eu3+-O2--Eu3+- bound magnetopolaron (BMP) model. The magnetism of Eu mono-doped ZnO systems with O vacancy is more stable than that without O vacancy, and such magnetism is attributed to the -Eu3+-VO++-Eu3+- BMP model. The absorption spectrum for mono-doped systems is red shifted, and this finding confirms that Eu-mono-doped ZnO is a candidate photocatalyst for various applications. Therefore, Eu-double-doped ZnO can be practically used as an unambiguous diluted magnetic semiconductor.

  5. Luminescence and Site Occupancy of Eu2+ in Ba2 Ca(BO3)2

    NASA Astrophysics Data System (ADS)

    Li, Pan-Lai; Wang, Zhi-Jun; Yang, Zhi-Ping; Guo, Qing-Lin

    2011-01-01

    A green phosphor Ba2Ca(BO3)2:Eu2+ was synthesized by a high temperature solid-state reaction method under a reductive atmosphere. The luminescence and site occupancy of Eu2+ in Ba2Ca(BO3)2 are investigated. Ba2Ca(BO3)2:Eu2+ shows one green band (537 nm) under 400 nm near ultraviolet excitation which is suitable for UV LED. Ca2+ and Ba2+ ions in Ba2Ca(BO3)2 are replaced by Eu2+ ions, the Ba2Ca(BO3)2:Eu2+ shows a dissymmetrical emission band. The influence of Eu2+ doping concentrations on the emission intensity of Ba2Ca(BO3)2:Eu2+ is studied. It is found that the emission intensity is influenced by the Eu2+ concentration and reaches the maximum value at 2% Eu2+. According to the Dexter theory, the concentration quenching mechanisms of Eu2+ in Ba2Ca(BO3)2 are the d-dinteraction.

  6. Fano Resonance of Eu2+ and Eu3+ in (Eu,Gd)Te MBE Layers

    NASA Astrophysics Data System (ADS)

    Orlowski, B. A.; Kowalski, B. J.; Dziawa, P.; Pietrzyk, M.; Mickievicius, S.; Osinniy, V.; Taliashvili, B.; Kowalik, I. A.; Story, T.; Johnson, R. L.

    2006-11-01

    Resonant photoemission spectroscopy, with application of synchrotron radiation, was used to study the valence band electronic structure of clean surface of (EuGd)Te layers. Fano-type resonant photoemission spectra corresponding to the Eu 4d-4f transition were measured to determine the contribution of 4f electrons of Eu2+ and Eu3+ ions to the valence band. The resonant and antiresonant photon energies of Eu2+ ions were found as equal to 141 V and 132 eV, respectively and for Eu3+ ions were found as equal to 146 eV and 132 eV, respectively. Contribution of Eu2+4f electrons was found at the valence band edge while for Eu3+ it was located in the region between 3.5 eV and 8.5 eV below the valence band edge.

  7. Facile synthesis and luminescence characteristics of high-quality CdS: Eu/ZnS core/shell nanocrystals with biocompatibility.

    PubMed

    Zhang, Kexin; Zhang, Rui; Yu, Yaxin; Sun, Shuqing

    2012-04-01

    In this paper, we report a facile method to synthesize high quality CdS: Eu nanocrystals (NCs) and CdS: Eu/ZnS NCs with strong photoluminescence (PL). The influence of various experimental variables including the concentration of Eu3+ ions, the reaction time and the reaction temperature were investigated systematically. In addition, the PL properties of CdS: Eu NCs exhibited pH sensitive. Under the acid condition, pH value of the CdS: Eu NCs solution played an important role in determining PL emission intensity. However, under the alkaline condition, the obtained CdS: Eu NCs exhibited a tunable PL emission wavelength (from 490 nm to 610 nm) when pH value was adjusted from pH 7 to 10. After coating with ZnS shell, the CdS: Eu/ZnS NCs showed enhanced PL intensity compare with one of the CdS: Eu NCs. The CdS: Eu NCs and CdS: Eu/ZnS NCs were characterized by X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM). In addition, the biocompatibility of these NCs was measured by hemolytic test, which indicated that CdS: Eu/ZnS NCs were more biocompatible than CdS: Eu NCs at the same conditions. It can be expected that CdS: Eu/ZnS NCs are promising biolabeling materials.

  8. Instrumentation and monitoring of the nextgen road infrastructure: Some results and perspectives from the R5G project

    NASA Astrophysics Data System (ADS)

    Hautière, Nicolas; Bourquin, Frédéric

    2017-04-01

    Through the centuries, the roads - which today constitute in France a huge transport network of 1 millions kilometers length - have always been able to cope with society needs and challenges. As a consequence, the next generation road infrastructure will have to take into account at least three societal transitions: ecological, energetic and digital. The goal of the 5th generation road project (R5G©) [1], led by Ifsttar in France, aligned with the Forever Open program [2], is to design and build demonstrators of such future road infrastructures. The goal of this presentation is to present different results related to the greening of road materials [3], the design of energy-positive roads [4, 5], the test of roads that self-diagnose [6], the design of roads adapted for connected [7], autonomous [8] and electrified vehicles [9], etc. In terms of perspectives, we will demonstrate that the road infrastructures will soon become a complex system: On one side road users will benefit from new services, on the other side such massively connected and instrumented infrastructures will potentially become an opportune sensor for knowledge development in geoscience, such as air quality, visibility and fog monitoring. References: [1] R5G project. r5g.ifsttar.fr [2] Forever Open Road project. www.foreveropenroad.eu [3] Biorepavation project. www.infravation.net/projects/BIOREPAVATION [4] N. Le Touz, J. Dumoulin. Numerical study of the thermal behavior of a new deicing road structure design with energy harvesting capabilities. EGU General Assembly 2015, Apr 2015, Vienne, Austria. [5] S. Asfour, F. Bernardin, E. Toussaint, J.-M. Piau. Hydrothermal modeling of porous pavement for its surface de-freezing. Applied Thermal Engineering. Volume 107, 25 August 2016, Pages 493-500 [6] LGV BPL Instrumentation. http://railenium.eu/wp-content/uploads/2016/08/INSTRUMENTATION-BPL-FR.pdf [7] SCOOP@F project. https://ec.europa.eu/inea/en/connecting-europe-facility/cef-transport/projects-by-country/multi-country/2014-eu-ta-0669-s [8] J. Ehrlich, D. Gruyer, O. Orfila, N. Hautière. Autonomous vehicle : The concept of high quality of service highway. FISITA World congress, Busan, Korea, 2016. [9] FABRIC project. www.fabric-project.eu

  9. Moon Munchies: Human Exploration Project Engineering Design Challenge--A Standards-Based Elementary School Model Unit Guide--Design, Build, and Evaluate (Lessons 1-6). Engineering By Design: Advancing Technological Literacy--A Standards-Based Program Series. EP-2007-08-92-MSFC

    ERIC Educational Resources Information Center

    Weaver, Kim M.

    2005-01-01

    In this unit, elementary students design and build a lunar plant growth chamber using the Engineering Design Process. The purpose of the unit is to help students understand and apply the design process as it relates to plant growth on the moon. This guide includes six lessons, which meet a number of national standards and benchmarks in…

  10. EXTERIOR ELEVATIONS. United Engineering Company Ltd., Alameda Shipyard, Ship Repair ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    EXTERIOR ELEVATIONS. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities, Office Building. Includes lettering detail for front elevation. John Hudspeth, Architect, at foot of Main Street, Alameda, Calif. Sheet no. A3 of 8 sheets, Plan no. 10,007. Scale 1/8 inch to the foot. March 18, 1942, last revised 9/21/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Office Building No. 137, 2900 Main Street, Alameda, Alameda County, CA

  11. PLANS & ELEVATIONS. United Engineering Company Ltd., Alameda Shipyard. Also ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PLANS & ELEVATIONS. United Engineering Company Ltd., Alameda Shipyard. Also includes door schedule and a small scale plot plan. No architect noted. Drawn by W.H.H. Plan no. 2-N-5 (U.E. Co. plan no. 10,523). Scale 1/8 inch to the foot. March 10, 1942, last revised 10/6/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76, item no. 22A. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Warehouse, 2900 Main Street, Alameda, Alameda County, CA

  12. SECOND FLOOR AND ROOF PLANS. United Engineering Company Ltd., Alameda ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    SECOND FLOOR AND ROOF PLANS. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities, Office Building. Second floor plan, and roof plan. John Hudspeth, Architect, at foot of Main Street, Alameda, Calif. Sheet no. A2 of 8 sheets, Plan no. 10,007. Scale 1/8 inch to the foot. March 18, 1942, last revised 9/22/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Office Building No. 137, 2900 Main Street, Alameda, Alameda County, CA

  13. 7. SHEET 1, CONTROL HOUSE FOR DRY DOCK. United Engineering ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. SHEET 1, CONTROL HOUSE FOR DRY DOCK. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities, Office Building. Plans, elevations, sections, details. John Hudspeth, Architect, at foot of Main Street, Alameda, Calif. Sheet no. 1 of 2 sheets, Plan no. 10,507. Various scales. January 4, 1943, last revised 1/28/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Control House for Dry Dock, 2900 Main Street, Alameda, Alameda County, CA

  14. The rare earth element geochemistry on surface sediments, shallow cores and lithological units of Lake Acıgöl basin, Denizli, Turkey

    NASA Astrophysics Data System (ADS)

    Budakoglu, Murat; Abdelnasser, Amr; Karaman, Muhittin; Kumral, Mustafa

    2015-11-01

    The sediments in Lake Acıgöl, located in SW Anatolia, Turkey, were formed under tectono-sedimentary events. REE geochemical investigations of the Lake Acıgöl sediments, from surface and shallow core sediments at different depths (0-10 cm, 10-20 cm and 20-30 cm) are presented to clarify the characteristics of REE and the nature of source rocks in the lake sediments' and to deduce their paleoenvironmental proxies. The chondrite-normalized REE patterns of these sediments are shown as light enrichment in LREE and flat HREE with a negative Eu anomaly that is close to the continental collision basin (CCB) in its profile; this is not comparable with PAAS and UCC. Inorganic detrital materials control the REE characteristics of the Lake Acıgöl sediments and these sediments were accumulated in oxic and dysoxic depositional conditions and/or at passive margins derived from oceanic island arc rocks. They were affected by low chemical weathering, either at the original source or during transport, before deposition under arid or subtropical humid climatic conditions. In addition, we used GIS techniques (such as Inverse Distance Weighted (IDW) and Geographically Weighted Regression (GWR)) to investigate the spatial interpolation and spatial correlation of the REEs from the lake surface sediments in Lake Acıgöl and its surrounding lithological units. GIS techniques showed that the lithological units (e.g., Hayrettin Formation) north of Lake Acıgöl have high REE contents; however, Eu/Eu∗ values were higher in some lake surface sediments than in lithological units, and that refers to a negative Eu-anomaly. Therefore, Lake Acıgöl sediments are derived from the weathered products, mainly from local, highly basic bedrock around the lake from the Archean crust. The chronology of Lake Acıgöl sediment was conducted using the Constant Rate of Supply (CRS) model. Using the CRS methods for the calculation of sedimentation rate, we obtained a 0.012 g/cm2/year value which is an average value for the first 20 cm depth of this lake. The core activity profiles of 210Pb and 137Cs were measured to estimate the age of the sediments; we observed activities of 8.08 ± 5.5 Bq/kg for 210Pb and 0.86 ± 0.6 Bq/kg for 137Cs.

  15. Europium gallium garnet (Eu3Ga5O12) and Eu3GaO6: Synthesis and material properties

    NASA Astrophysics Data System (ADS)

    Sawada, Kenji; Nakamura, Toshihiro; Adachi, Sadao

    2016-10-01

    Eu-Ga-O ternary compounds were synthesized from a mixture of cubic (c-) Eu2O3 and monoclinic Ga2O3 (β-Ga2O3) raw powders using the solid-state reaction method by calcination at Tc = 1200 °C. The structural and optical properties of the Eu-Ga-O ternary compounds were investigated using X-ray diffraction analysis, photoluminescence (PL) analysis, PL excitation (PLE) spectroscopy, and Raman scattering measurements. Stoichiometric compounds such as cubic Eu3Ga5O12 (EGG) and orthorhombic Eu3GaO6 were synthesized using molar ratios of x = 0.375 and 0.75 [x≡Eu2O3/(Eu2O3 + Ga2O3)], respectively, together with the end-point binary compounds β-Ga2O3 (x = 0) and monoclinic (m-) Eu2O3 (x = 1.0). The structural change from "cubic" to "monoclinic" in Eu2O3 is due to the structural phase transition occurring at Tc ≥ 1050 °C. In principle, the perovskite-type EuGaO3 and monoclinic Eu4Ga2O9 can also be synthesized at x = 0.5 and 0.667, respectively; however, such stoichiometric compounds could not be synthesized in this study. The PL and PLE properties of EGG and Eu3GaO6 were studied in detail. The temperature dependence of the PL spectra was observed through measurements carried out between T = 20 and 300 K and explained using a newly developed model. Raman scattering measurements were also performed on the Eu-Ga-O ternary systems over the entire composition range from x = 0 (β-Ga2O3) to 1.0 (m-Eu2O3).

  16. The Enhanced Red Emission and Improved Thermal Stability of CaAlSiN3:Eu2+ Phosphors by Using Nano-EuB6 as Raw Material

    PubMed Central

    Liu, Wen-Quan; Wu, Dan; Chang, Hugejile; Duan, Ru-Xia; Wu, Wen-Jie; Amu, Guleng; Bao, Fu-Quan; Tegus, Ojiyed

    2018-01-01

    Synthesizing phosphors with high performance is still a necessary work for phosphor-converted white light-emitting diodes (W-LEDs). In this paper, three series of CaAlSiN3:Eu2+ (denoted as CASN:Eu2+) phosphors using Eu2O3, EuN and EuB6 as raw materials respectively are fabricated by under the alloy precursor normal pressure nitridation synthesis condition. We demonstrate that CASN:Eu2+ using nano-EuB6 as raw material shows higher emission intensity than others, which is ascribed to the increment of Eu2+ ionic content entering into the crystal lattice. An improved thermal stability can also be obtained by using nano-EuB6 due to the structurally stable status, which is assigned to the partial substitution of Eu–O (Eu–N) bonds by more covalent Eu–B ones that leads to a higher structural rigidity. In addition, the W-LEDs lamp was fabricated to explore its possible application in W-LEDs based on blue LEDs. Our results indicate that using EuB6 as raw materials can provide an effective way of enhancing the red emission and improving the thermal stability of the CASN:Eu2+ red phosphor. PMID:29370148

  17. Life-Cycle Inventory of Manufacturing Prefinished Engineered Wood Flooring in the Eastern United States

    Treesearch

    Richard D. Bergman; Scott A. Bowe

    2010-01-01

    Building products have come under increased scrutiny because of environmental impacts from their manufacturing. However, environmental impacts of manufacturing some wood products—such as prefinished engineered wood flooring—have not been determined. This study examined prefinished engineered wood flooring in the eastern United States following the life-cycle inventory...

  18. Fifth Graders' Learning about Simple Machines through Engineering Design-Based Instruction Using LEGO™ Materials

    ERIC Educational Resources Information Center

    Marulcu, Ismail; Barnett, Mike

    2013-01-01

    This study is part of a 5-year National Science Foundation-funded project, Transforming Elementary Science Learning Through LEGO™ Engineering Design. In this study, we report on the successes and challenges of implementing an engineering design-based and LEGO™-oriented unit in an urban classroom setting and we focus on the impact of the unit on…

  19. Engineering Education and Practice in the United States: Foundations of Our Techno-Economic Future.

    ERIC Educational Resources Information Center

    National Academy of Sciences - National Research Council, Washington, DC.

    The National Research Council's Committee on the Education and Utilization of the Engineer conducted a study aimed at achieving a comprehensive understanding of engineering in the United States and an assessment of its capacity to meet present and future needs. This document reports on the findings of the committee's work over a 2-year period. The…

  20. Engine Tune-Up Service. Unit 4: Secondary Circuit. Posttests. Automotive Mechanics Curriculum.

    ERIC Educational Resources Information Center

    Morse, David T.

    This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 4, Secondary Circuit, available separately as CE 031 214. Focus of the posttests is testing and servicing the secondary ignition circuit. One multiple choice posttest is provided that covers the seven performance objectives contained in the unit. (No…

Top