77 FR 15250 - Value Engineering

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-15

...-2011-0046] RIN 2125-AF40 Value Engineering AGENCY: Federal Highway Administration (FHWA), DOT. ACTION: Final rule. SUMMARY: This rule updates regulations to enhance the integration of value engineering (VE... Office of Management and Budget (OMB) Circular A-131 on Value Engineering. These revisions also will...

An Architecture for Performance Optimization in a Collaborative Knowledge-Based Approach for Wireless Sensor Networks

PubMed Central

Gadeo-Martos, Manuel Angel; Fernandez-Prieto, Jose Angel; Canada-Bago, Joaquin; Velasco, Juan Ramon

2011-01-01

Over the past few years, Intelligent Spaces (ISs) have received the attention of many Wireless Sensor Network researchers. Recently, several studies have been devoted to identify their common capacities and to set up ISs over these networks. However, little attention has been paid to integrating Fuzzy Rule-Based Systems into collaborative Wireless Sensor Networks for the purpose of implementing ISs. This work presents a distributed architecture proposal for collaborative Fuzzy Rule-Based Systems embedded in Wireless Sensor Networks, which has been designed to optimize the implementation of ISs. This architecture includes the following: (a) an optimized design for the inference engine; (b) a visual interface; (c) a module to reduce the redundancy and complexity of the knowledge bases; (d) a module to evaluate the accuracy of the new knowledge base; (e) a module to adapt the format of the rules to the structure used by the inference engine; and (f) a communications protocol. As a real-world application of this architecture and the proposed methodologies, we show an application to the problem of modeling two plagues of the olive tree: prays (olive moth, Prays oleae Bern.) and repilo (caused by the fungus Spilocaea oleagina). The results show that the architecture presented in this paper significantly decreases the consumption of resources (memory, CPU and battery) without a substantial decrease in the accuracy of the inferred values. PMID:22163687

An architecture for performance optimization in a collaborative knowledge-based approach for wireless sensor networks.

PubMed

Gadeo-Martos, Manuel Angel; Fernandez-Prieto, Jose Angel; Canada-Bago, Joaquin; Velasco, Juan Ramon

2011-01-01

Over the past few years, Intelligent Spaces (ISs) have received the attention of many Wireless Sensor Network researchers. Recently, several studies have been devoted to identify their common capacities and to set up ISs over these networks. However, little attention has been paid to integrating Fuzzy Rule-Based Systems into collaborative Wireless Sensor Networks for the purpose of implementing ISs. This work presents a distributed architecture proposal for collaborative Fuzzy Rule-Based Systems embedded in Wireless Sensor Networks, which has been designed to optimize the implementation of ISs. This architecture includes the following: (a) an optimized design for the inference engine; (b) a visual interface; (c) a module to reduce the redundancy and complexity of the knowledge bases; (d) a module to evaluate the accuracy of the new knowledge base; (e) a module to adapt the format of the rules to the structure used by the inference engine; and (f) a communications protocol. As a real-world application of this architecture and the proposed methodologies, we show an application to the problem of modeling two plagues of the olive tree: prays (olive moth, Prays oleae Bern.) and repilo (caused by the fungus Spilocaea oleagina). The results show that the architecture presented in this paper significantly decreases the consumption of resources (memory, CPU and battery) without a substantial decrease in the accuracy of the inferred values.

22 CFR 228.39 - Special source rules for construction and engineering services.

Code of Federal Regulations, 2010 CFR

2010-04-01

... engineering services. 228.39 Section 228.39 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT RULES ON... engineering services. Advanced developing countries, eligible under Geographic Code 941, which have attained a competitive capability in international markets for construction services or engineering services are not...

22 CFR 228.39 - Special source rules for construction and engineering services.

Code of Federal Regulations, 2011 CFR

2011-04-01

... engineering services. 228.39 Section 228.39 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT RULES ON... engineering services. Advanced developing countries, eligible under Geographic Code 941, which have attained a competitive capability in international markets for construction services or engineering services are not...

TARGET's role in knowledge acquisition, engineering, validation, and documentation

NASA Technical Reports Server (NTRS)

Levi, Keith R.

1994-01-01

We investigate the use of the TARGET task analysis tool for use in the development of rule-based expert systems. We found TARGET to be very helpful in the knowledge acquisition process. It enabled us to perform knowledge acquisition with one knowledge engineer rather than two. In addition, it improved communication between the domain expert and knowledge engineer. We also found it to be useful for both the rule development and refinement phases of the knowledge engineering process. Using the network in these phases required us to develop guidelines that enabled us to easily translate the network into production rules. A significant requirement for TARGET remaining useful throughout the knowledge engineering process was the need to carefully maintain consistency between the network and the rule representations. Maintaining consistency not only benefited the knowledge engineering process, but also has significant payoffs in the areas of validation of the expert system and documentation of the knowledge in the system.

Loading Deformation Characteristic Simulation Study of Engineering Vehicle Refurbished Tire

NASA Astrophysics Data System (ADS)

Qiang, Wang; Xiaojie, Qi; Zhao, Yang; Yunlong, Wang; Guotian, Wang; Degang, Lv

2018-05-01

The paper constructed engineering vehicle refurbished tire computer geometry model, mechanics model, contact model, finite element analysis model, did simulation study on load-deformation property of engineering vehicle refurbished tire by comparing with that of the new and the same type tire, got load-deformation of engineering vehicle refurbished tire under the working condition of static state and ground contact. The analysis result shows that change rules of radial-direction deformation and side-direction deformation of engineering vehicle refurbished tire are close to that of the new tire, radial-direction and side-direction deformation value is a little less than that of the new tire. When air inflation pressure was certain, radial-direction deformation linear rule of engineer vehicle refurbished tire would increase with load adding, however, side-direction deformation showed linear change rule, when air inflation pressure was low; and it would show increase of non-linear change rule, when air inflation pressure was very high.

Relating Narrative, Inquiry, and Inscriptions: Supporting Consequential Play

NASA Astrophysics Data System (ADS)

Barab, Sasha A.; Sadler, Troy D.; Heiselt, Conan; Hickey, Daniel; Zuiker, Steven

2007-02-01

In this paper we describe our research using a multi-user virtual environment, Quest Atlantis, to embed fourth grade students in an aquatic habitat simulation. Specifically targeted towards engaging students in a rich inquiry investigation, we layered a socio-scientific narrative and an interactive rule set into a multi-user virtual environment gaming engine to establish a virtual world through which students learned about science inquiry, water quality concepts, and the challenges in balancing scientific and socio-economic factors. Overall, students were clearly engaged, participated in rich scientific discourse, submitted quality work, and learned science content. Further, through participation in this narrative, students developed a rich perceptual, conceptual, and ethical understanding of science. This study suggests that multi-user virtual worlds can be effectively leveraged to support academic content learning.

Erratum to: Relating Narrative, Inquiry, and Inscriptions: Supporting Consequential Play

NASA Astrophysics Data System (ADS)

Barab, Sasha A.; Sadler, Troy D.; Heiselt, Conan; Hickey, Daniel; Zuiker, Steven

2010-08-01

In this paper we describe our research using a multi-user virtual environment, Quest Atlantis, to embed fourth grade students in an aquatic habitat simulation. Specifically targeted towards engaging students in a rich inquiry investigation, we layered a socio-scientific narrative and an interactive rule set into a multi-user virtual environment gaming engine to establish a virtual world through which students learned about science inquiry, water quality concepts, and the challenges in balancing scientific and socio-economic factors. Overall, students were clearly engaged, participated in rich scientific discourse, submitted quality work, and learned science content. Further, through participation in this narrative, students developed a rich perceptual, conceptual, and ethical understanding of science. This study suggests that multi-user virtual worlds can be effectively leveraged to support academic content learning.

International Rules for Pre-College Science Research: Guidelines for Science and Engineering Fairs, 2010-2011

ERIC Educational Resources Information Center

Society for Science & the Public, 2011

2011-01-01

This paper presents the rules and guidelines of the Intel International Science and Engineering Fair 2011 to be held in Los Angeles, California in May 8-13, 2011. In addition to providing the rules of competition, these rules and guidelines for conducting research were developed to facilitate the following: (1) protect the rights and welfare of…

Signal-chip microcomputer control system for a diffraction grating ruling engine

NASA Astrophysics Data System (ADS)

Wang, Xiaolin; Zhang, Yuhua; Yang, Houmin; Guo, Du

1998-08-01

A control system with a chip of 8031 single-chip microcomputer as its nucleus for a diffraction grating ruling engine has been developed, its hardware and software are presented in this paper. A series of techniques such as program-controlled amplifier and interference fringes subdivision as well as motor velocity step governing are adopted to improve the control accuracy. With this control system, 8 kinds of gratings of different spacings can be ruled, the positioning precision of the diffraction grating ruling engine (sigma) equals 3.6 nm, and the maximum positioning error is less than 14.6 nm.

14 CFR 91.529 - Flight engineer requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Flight engineer requirements. 91.529... (CONTINUED) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES Large and Turbine-Powered Multiengine Airplanes and Fractional Ownership Program Aircraft § 91.529 Flight engineer...

14 CFR 91.529 - Flight engineer requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 2 2012-01-01 2012-01-01 false Flight engineer requirements. 91.529... (CONTINUED) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES Large and Turbine-Powered Multiengine Airplanes and Fractional Ownership Program Aircraft § 91.529 Flight engineer...

Collaboration rules.

PubMed

Evans, Philip; Wolf, Bob

2005-01-01

Corporate leaders seeking to boost growth, learning, and innovation may find the answer in a surprising place: the Linux open-source software community. Linux is developed by an essentially volunteer, self-organizing community of thousands of programmers. Most leaders would sell their grandmothers for workforces that collaborate as efficiently, frictionlessly, and creatively as the self-styled Linux hackers. But Linux is software, and software is hardly a model for mainstream business. The authors have, nonetheless, found surprising parallels between the anarchistic, caffeinated, hirsute world of Linux hackers and the disciplined, tea-sipping, clean-cut world of Toyota engineering. Specifically, Toyota and Linux operate by rules that blend the self-organizing advantages of markets with the low transaction costs of hierarchies. In place of markets' cash and contracts and hierarchies' authority are rules about how individuals and groups work together (with rigorous discipline); how they communicate (widely and with granularity); and how leaders guide them toward a common goal (through example). Those rules, augmented by simple communication technologies and a lack of legal barriers to sharing information, create rich common knowledge, the ability to organize teams modularly, extraordinary motivation, and high levels of trust, which radically lowers transaction costs. Low transaction costs, in turn, make it profitable for organizations to perform more and smaller transactions--and so increase the pace and flexibility typical of high-performance organizations. Once the system achieves critical mass, it feeds on itself. The larger the system, the more broadly shared the knowledge, language, and work style. The greater individuals' reputational capital, the louder the applause and the stronger the motivation. The success of Linux is evidence of the power of that virtuous circle. Toyota's success is evidence that it is also powerful in conventional companies.

High Level Rule Modeling Language for Airline Crew Pairing

NASA Astrophysics Data System (ADS)

Mutlu, Erdal; Birbil, Ş. Ilker; Bülbül, Kerem; Yenigün, Hüsnü

2011-09-01

The crew pairing problem is an airline optimization problem where a set of least costly pairings (consecutive flights to be flown by a single crew) that covers every flight in a given flight network is sought. A pairing is defined by using a very complex set of feasibility rules imposed by international and national regulatory agencies, and also by the airline itself. The cost of a pairing is also defined by using complicated rules. When an optimization engine generates a sequence of flights from a given flight network, it has to check all these feasibility rules to ensure whether the sequence forms a valid pairing. Likewise, the engine needs to calculate the cost of the pairing by using certain rules. However, the rules used for checking the feasibility and calculating the costs are usually not static. Furthermore, the airline companies carry out what-if-type analyses through testing several alternate scenarios in each planning period. Therefore, embedding the implementation of feasibility checking and cost calculation rules into the source code of the optimization engine is not a practical approach. In this work, a high level language called ARUS is introduced for describing the feasibility and cost calculation rules. A compiler for ARUS is also implemented in this work to generate a dynamic link library to be used by crew pairing optimization engines.

Final Rule for Revised Carbon Monoxide (CO) Standard for Class I and II Nonhandheld New Nonroad Phase 1 Small Spark-Ignition Engines

EPA Pesticide Factsheets

Rule published November 13, 1996, addressing the CO emission difference between oxygenated and nonoxygenated fuels that was not reflected when the Agency previously set the CO standard for these nonhandheld engines in a final rule published July 3, 1995.

78 FR 23837 - Cranes and Derricks in Construction: Underground Construction and Demolition

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-23

... report here the results for the entire heavy-and-civil engineering sector and the entire site... in this final rule because employers included in the heavy-and-civil engineering sector, or the site... final rule. This final rule affects two construction sectors: NAICS 237990 (Other Heavy and Civil...

Robust Strategy for Rocket Engine Health Monitoring

NASA Technical Reports Server (NTRS)

Santi, L. Michael

2001-01-01

Monitoring the health of rocket engine systems is essentially a two-phase process. The acquisition phase involves sensing physical conditions at selected locations, converting physical inputs to electrical signals, conditioning the signals as appropriate to establish scale or filter interference, and recording results in a form that is easy to interpret. The inference phase involves analysis of results from the acquisition phase, comparison of analysis results to established health measures, and assessment of health indications. A variety of analytical tools may be employed in the inference phase of health monitoring. These tools can be separated into three broad categories: statistical, rule based, and model based. Statistical methods can provide excellent comparative measures of engine operating health. They require well-characterized data from an ensemble of "typical" engines, or "golden" data from a specific test assumed to define the operating norm in order to establish reliable comparative measures. Statistical methods are generally suitable for real-time health monitoring because they do not deal with the physical complexities of engine operation. The utility of statistical methods in rocket engine health monitoring is hindered by practical limits on the quantity and quality of available data. This is due to the difficulty and high cost of data acquisition, the limited number of available test engines, and the problem of simulating flight conditions in ground test facilities. In addition, statistical methods incur a penalty for disregarding flow complexity and are therefore limited in their ability to define performance shift causality. Rule based methods infer the health state of the engine system based on comparison of individual measurements or combinations of measurements with defined health norms or rules. This does not mean that rule based methods are necessarily simple. Although binary yes-no health assessment can sometimes be established by relatively simple rules, the causality assignment needed for refined health monitoring often requires an exceptionally complex rule base involving complicated logical maps. Structuring the rule system to be clear and unambiguous can be difficult, and the expert input required to maintain a large logic network and associated rule base can be prohibitive.

On implementing clinical decision support: achieving scalability and maintainability by combining business rules and ontologies.

PubMed

Kashyap, Vipul; Morales, Alfredo; Hongsermeier, Tonya

2006-01-01

We present an approach and architecture for implementing scalable and maintainable clinical decision support at the Partners HealthCare System. The architecture integrates a business rules engine that executes declarative if-then rules stored in a rule-base referencing objects and methods in a business object model. The rules engine executes object methods by invoking services implemented on the clinical data repository. Specialized inferences that support classification of data and instances into classes are identified and an approach to implement these inferences using an OWL based ontology engine is presented. Alternative representations of these specialized inferences as if-then rules or OWL axioms are explored and their impact on the scalability and maintenance of the system is presented. Architectural alternatives for integration of clinical decision support functionality with the invoking application and the underlying clinical data repository; and their associated trade-offs are discussed and presented.

Final Rule for Control of Air Pollution From New Motor Vehicles and New Motor Vehicle Engines; Non-Conformance Penalties for 2004 and later Model Year Emission Standards for Heavy-Duty Diesel Engines and Heavy-Duty Diesel Vehicles

EPA Pesticide Factsheets

Final Rule for Control of Air Pollution From New Motor Vehicles and New Motor Vehicle Engines; Non-Conformance Penalties for 2004 and later Model Year Emission Standards for Heavy-Duty Diesel Engines and Heavy-Duty Diesel Vehicles

The good engineer: giving virtue its due in engineering ethics.

PubMed

Harris, Charles E

2008-06-01

During the past few decades, engineering ethics has been oriented towards protecting the public from professional misconduct by engineers and from the harmful effects of technology. This "preventive ethics" project has been accomplished primarily by means of the promulgation of negative rules. However, some aspects of engineering professionalism, such as (1) sensitivity to risk (2) awareness of the social context of technology, (3) respect for nature, and (4) commitment to the public good, cannot be adequately accounted for in terms of rules, certainly not negative rules. Virtue ethics is a more appropriate vehicle for expressing these aspects of engineering professionalism. Some of the unique features of virtue ethics are the greater place it gives for discretion and judgment and also for inner motivation and commitment. Four of the many professional virtues that are important for engineers correspond to the four aspects of engineering professionalism listed above. Finally, the importance of the humanities and social sciences in promoting these virtues suggests that these disciplines are crucial in the professional education of engineers.

Use of an expert system data analysis manager for space shuttle main engine test evaluation

NASA Technical Reports Server (NTRS)

Abernethy, Ken

1988-01-01

The ability to articulate, collect, and automate the application of the expertise needed for the analysis of space shuttle main engine (SSME) test data would be of great benefit to NASA liquid rocket engine experts. This paper describes a project whose goal is to build a rule-based expert system which incorporates such expertise. Experiential expertise, collected directly from the experts currently involved in SSME data analysis, is used to build a rule base to identify engine anomalies similar to those analyzed previously. Additionally, an alternate method of expertise capture is being explored. This method would generate rules inductively based on calculations made using a theoretical model of the SSME's operation. The latter rules would be capable of diagnosing anomalies which may not have appeared before, but whose effects can be predicted by the theoretical model.

78 FR 73726 - Endangered Fish and Wildlife; Final Rule To Remove the Sunset Provision of the Final Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-09

... expanded speed/risk models, one study estimated that the 2008 vessel speed rule reduced the risk of lethal... are completely absent there or that the risk of strikes does not exist. One recent study concluded... the world's most critically endangered large whale species and one of the world's most endangered...

Code of Ethics for Electrical Engineers

NASA Astrophysics Data System (ADS)

Matsuki, Junya

The Institute of Electrical Engineers of Japan (IEEJ) has established the rules of practice for its members recently, based on its code of ethics enacted in 1998. In this paper, first, the characteristics of the IEEJ 1998 ethical code are explained in detail compared to the other ethical codes for other fields of engineering. Secondly, the contents which shall be included in the modern code of ethics for electrical engineers are discussed. Thirdly, the newly-established rules of practice and the modified code of ethics are presented. Finally, results of questionnaires on the new ethical code and rules which were answered on May 23, 2007, by 51 electrical and electronic students of the University of Fukui are shown.

Using Inspiration from Synaptic Plasticity Rules to Optimize Traffic Flow in Distributed Engineered Networks.

PubMed

Suen, Jonathan Y; Navlakha, Saket

2017-05-01

Controlling the flow and routing of data is a fundamental problem in many distributed networks, including transportation systems, integrated circuits, and the Internet. In the brain, synaptic plasticity rules have been discovered that regulate network activity in response to environmental inputs, which enable circuits to be stable yet flexible. Here, we develop a new neuro-inspired model for network flow control that depends only on modifying edge weights in an activity-dependent manner. We show how two fundamental plasticity rules, long-term potentiation and long-term depression, can be cast as a distributed gradient descent algorithm for regulating traffic flow in engineered networks. We then characterize, both by simulation and analytically, how different forms of edge-weight-update rules affect network routing efficiency and robustness. We find a close correspondence between certain classes of synaptic weight update rules derived experimentally in the brain and rules commonly used in engineering, suggesting common principles to both.

True Dopers or Negligent Athletes? An Analysis of Anti-Doping Rule Violations Reported to the World Anti-Doping Agency 2010-2012.

PubMed

de Hon, Olivier; van Bottenburg, Maarten

2017-12-06

The sanction that an athlete receives when an anti-doping rule violation has been committed depends on the specific circumstances of the case. Anti-doping tribunals decide on the final sanction, following the rules of the World Anti-Doping Code. To assess the athletes' degree of fault based on the length of sanctions imposed on them to feed policy-related discussions. Analysing data from the results management database of the World Anti-Doping Agency for anonymous information of anti-doping rule violations in eight selected sports covering the years 2010-2012. Four out of ten athletes who committed an anti-doping rule violation received a suspension that was lower than the standard. This is an indication that tribunals in many instances are not convinced that the athletes concerned were completely at fault, that mitigating circumstances were applicable, or that full responsibility of the suspected violation should not be held against them. Anabolic agents, peptide hormones, and hormone modulators lead to higher sanctions, as do combinations of several anti-doping rule violations. This first analysis of information from the World Anti-Doping Agency's results management database indicates that a large proportion of the athletes who commit anti-doping rule violations may have done this unintentionally. Anti-doping professionals should strive to improve this situation in various ways.

Rule groupings: A software engineering approach towards verification of expert systems

NASA Technical Reports Server (NTRS)

Mehrotra, Mala

1991-01-01

Currently, most expert system shells do not address software engineering issues for developing or maintaining expert systems. As a result, large expert systems tend to be incomprehensible, difficult to debug or modify and almost impossible to verify or validate. Partitioning rule based systems into rule groups which reflect the underlying subdomains of the problem should enhance the comprehensibility, maintainability, and reliability of expert system software. Attempts were made to semiautomatically structure a CLIPS rule base into groups of related rules that carry the same type of information. Different distance metrics that capture relevant information from the rules for grouping are discussed. Two clustering algorithms that partition the rule base into groups of related rules are given. Two independent evaluation criteria are developed to measure the effectiveness of the grouping strategies. Results of the experiment with three sample rule bases are presented.

An Expert-System Engine With Operative Probabilities

NASA Technical Reports Server (NTRS)

Orlando, N. E.; Palmer, M. T.; Wallace, R. S.

1986-01-01

Program enables proof-of-concepts tests of expert systems under development. AESOP is rule-based inference engine for expert system, which makes decisions about particular situation given user-supplied hypotheses, rules, and answers to questions drawn from rules. If knowledge base containing hypotheses and rules governing environment is available to AESOP, almost any situation within that environment resolved by answering questions asked by AESOP. Questions answered with YES, NO, MAYBE, DON'T KNOW, DON'T CARE, or with probability factor ranging from 0 to 10. AESOP written in Franz LISP for interactive execution.

A Cognitive Architecture for Human Performance Process Model Research

DTIC Science & Technology

1992-11-01

individually defined, updatable world representation which is a description of the world as the operator knows it. It contains rules for decisions, an...operate it), and rules of engagement (knowledge about the operator’s expected behavior). The HPP model works in the following way. Information enters...based models depict the problem-solving processes of experts. The experts’ knowledge is represented in symbol structures, along with rules for

Collaboration pathway(s) using new tools for optimizing operational climate monitoring from space

NASA Astrophysics Data System (ADS)

Helmuth, Douglas B.; Selva, Daniel; Dwyer, Morgan M.

2014-10-01

Consistently collecting the earth's climate signatures remains a priority for world governments and international scientific organizations. Architecting a solution requires transforming scientific missions into an optimized robust `operational' constellation that addresses the needs of decision makers, scientific investigators and global users for trusted data. The application of new tools offers pathways for global architecture collaboration. Recent (2014) rulebased decision engine modeling runs that targeted optimizing the intended NPOESS architecture, becomes a surrogate for global operational climate monitoring architecture(s). This rule-based systems tools provide valuable insight for Global climate architectures, through the comparison and evaluation of alternatives considered and the exhaustive range of trade space explored. A representative optimization of Global ECV's (essential climate variables) climate monitoring architecture(s) is explored and described in some detail with thoughts on appropriate rule-based valuations. The optimization tools(s) suggest and support global collaboration pathways and hopefully elicit responses from the audience and climate science shareholders.

GIS Data Based Automatic High-Fidelity 3D Road Network Modeling

NASA Technical Reports Server (NTRS)

Wang, Jie; Shen, Yuzhong

2011-01-01

3D road models are widely used in many computer applications such as racing games and driving simulations_ However, almost all high-fidelity 3D road models were generated manually by professional artists at the expense of intensive labor. There are very few existing methods for automatically generating 3D high-fidelity road networks, especially those existing in the real world. This paper presents a novel approach thai can automatically produce 3D high-fidelity road network models from real 2D road GIS data that mainly contain road. centerline in formation. The proposed method first builds parametric representations of the road centerlines through segmentation and fitting . A basic set of civil engineering rules (e.g., cross slope, superelevation, grade) for road design are then selected in order to generate realistic road surfaces in compliance with these rules. While the proposed method applies to any types of roads, this paper mainly addresses automatic generation of complex traffic interchanges and intersections which are the most sophisticated elements in the road networks

Direct Final Rule: Nonroad Diesel Technical Amendments and Tier 3 Technical Relief Provision

EPA Pesticide Factsheets

Rule making certain technical corrections to the rules establishing emission standards for nonroad diesel engines and amending those rules to provide manufacturers with a production technical relief provision for Tier 3 equipment.

Following the Rules.

PubMed

Katz, Anne

2016-05-01

I am getting better at following the rules as I grow older, although I still bristle at many of them. I was a typical rebellious teenager; no one understood me, David Bowie was my idol, and, one day, my generation was going to change the world. Now I really want people to understand me: David Bowie remains one of my favorite singers and, yes, my generation has changed the world, and not necessarily for the better. Growing up means that you have to make the rules, not just follow those set by others, and, at times, having rules makes a lot of sense.
.

Educating Engineers for World Development. Proceedings of a World Congress (Estes Park, Colorado, June 10-12, 1975).

ERIC Educational Resources Information Center

English, J. Morley, Ed.; Collins, W. Leighton, Ed.

This report comprises papers commissioned for the World Congress on Educating Engineers for World Development, sponsored by the International Division of the American Society for Engineering Education, and held in Colorado in June 1975. The purpose of the Congress was to bring about significant changes in the education of engineers and in the…

Final Rule for Standards for Emissions From Natural Gas-Fueled, and Liquefied Petroleum Gas-Fueled Motor Vehicles and Motor Vehicle Engines, and Certification Procedures for Aftermarket Conversions

EPA Pesticide Factsheets

This rule provides emission standards and test procedures for the certification of new natural gasfueled, and liquefied petroleum gasfueled light-duty vehicles, light-duty trucks, heavy-duty engines and vehicles, and motorcycles.

26 CFR 1.925(a)-1T - Temporary regulations; transfer pricing rules for FSCs.

Code of Federal Regulations, 2013 CFR

2013-04-01

... paragraph. (D) Engineering or architectural services for construction projects located (or proposed for... this paragraph. (v) A special grouping rule applies to agricultural and horticultural products sold to... subdivision (i) of this paragraph does not apply. Income from the performance of engineering and architectural...

Engineers' Non-Scientific Models in Technology Education

ERIC Educational Resources Information Center

Norstrom, Per

2013-01-01

Engineers commonly use rules, theories and models that lack scientific justification. Examples include rules of thumb based on experience, but also models based on obsolete science or folk theories. Centrifugal forces, heat and cold as substances, and sucking vacuum all belong to the latter group. These models contradict scientific knowledge, but…

Paradigms for environmentally conscious manufacturing

NASA Astrophysics Data System (ADS)

Edinbarough, Immanuel A.; Wells, Wayne E.

2004-12-01

There are several stories involving the industries that pledge themselves for the environmentally conscious manufacturing practices. Paradigms for environmentally conscious manufacturing are associated with one of the aspects of environmental quality, protection, resource management, commitment or sustainability. The engineering rules of thumb that can easily be adopted by aspiring companies need identification. The underlying thread that unifies the efforts of environmentally conscious manufacturing companies, in offering the environmentally safe products to the world, is grouped and presented in the paper as paradigms for successful practices. The various ways in which a start up company, that wants to excel in environmentally conscious manufacturing, can position itself based on the paradigms is also discussed in the paper.

Bergmann's Rule, Adaptation, and Thermoregulation in Arctic Animals: Conflicting Perspectives from Physiology, Evolutionary Biology, and Physical Anthropology After World War II.

PubMed

Hagen, Joel B

2017-05-01

Bergmann's rule and Allen's rule played important roles in mid-twentieth century discussions of adaptation, variation, and geographical distribution. Although inherited from the nineteenth-century natural history tradition these rules gained significance during the consolidation of the modern synthesis as evolutionary theorists focused attention on populations as units of evolution. For systematists, the rules provided a compelling rationale for identifying geographical races or subspecies, a function that was also picked up by some physical anthropologists. More generally, the rules provided strong evidence for adaptation by natural selection. Supporters of the rules tacitly, or often explicitly, assumed that the clines described by the rules reflected adaptations for thermoregulation. This assumption was challenged by the physiologists Laurence Irving and Per Scholander based on their arctic research conducted after World War II. Their critique spurred a controversy played out in a series of articles in Evolution, in Ernst Mayr's Animal Species and Evolution, and in the writings of other prominent evolutionary biologists and physical anthropologists. Considering this episode highlights the complexity and ambiguity of important biological concepts such as adaptation, homeostasis, and self-regulation. It also demonstrates how different disciplinary orientations and styles of scientific research influenced evolutionary explanations, and the consequent difficulties of constructing a truly synthetic evolutionary biology in the decades immediately following World War II.

Transformation of Arden Syntax's medical logic modules into ArdenML for a business rules management system.

PubMed

Jung, Chai Young; Choi, Jong-Ye; Jeong, Seong Jik; Cho, Kyunghee; Koo, Yong Duk; Bae, Jin Hee; Kim, Sukil

2016-05-16

Arden Syntax is a Health Level Seven International (HL7) standard language that is used for representing medical knowledge as logic statements. Arden Syntax Markup Language (ArdenML) is a new representation of Arden Syntax based on XML. Compilers are required to execute medical logic modules (MLMs) in the hospital environment. However, ArdenML may also replace the compiler. The purpose of this study is to demonstrate that MLMs, encoded in ArdenML, can be transformed into a commercial rule engine format through an XSLT stylesheet and made executable in a target system. The target rule engine selected was Blaze Advisor. We developed an XSLT stylesheet to transform MLMs in ArdenML into Structured Rules Language (SRL) in Blaze Advisor, through a comparison of syntax between the two languages. The stylesheet was then refined recursively, by building and applying rules collected from the billing and coding guidelines of the Korean health insurance service. Two nurse coders collected and verified the rules and two information technology (IT) specialists encoded the MLMs and built the XSLT stylesheet. Finally, the stylesheet was validated by importing the MLMs into Blaze Advisor and applying them to claims data. The language comparison revealed that Blaze Advisor requires the declaration of variables with explicit types. We used both integer and real numbers for numeric types in ArdenML. "IF∼THEN" statements and assignment statements in ArdenML become rules in Blaze Advisor. We designed an XSLT stylesheet to solve this issue. In addition, we maintained the order of rule execution in the transformed rules, and added two small programs to support variable declarations and action statements. A total of 1489 rules were reviewed during this study, of which 324 rules were collected. We removed duplicate rules and encoded 241 unique MLMs in ArdenML, which were successfully transformed into SRL and imported to Blaze Advisor via the XSLT stylesheet. When applied to 73,841 outpatients' insurance claims data, the review result was the same as that of the legacy system. We have demonstrated that ArdenML can replace a compiler for transforming MLMs into commercial rule engine format. While the proposed XSLT stylesheet requires refinement for general use, we anticipate that the development of further XSLT stylesheets will support various rule engines. Copyright © 2016 Elsevier B.V. All rights reserved.

Direct Final Rule for Technical Amendments for Marine Spark-Ignition Engines and Vessels

EPA Pesticide Factsheets

Rule published September 16, 2010 to make technical amendments to the design standard for portable marine fuel tanks. This rule incorporates safe recommended practices, developed through industry consensus.

Architecture For The Optimization Of A Machining Process In Real Time Through Rule-Based Expert System

NASA Astrophysics Data System (ADS)

Serrano, Rafael; González, Luis Carlos; Martín, Francisco Jesús

2009-11-01

Under the project SENSOR-IA which has had financial funding from the Order of Incentives to the Regional Technology Centers of the Counsil of Innovation, Science and Enterprise of Andalusia, an architecture for the optimization of a machining process in real time through rule-based expert system has been developed. The architecture consists of an acquisition system and sensor data processing engine (SATD) from an expert system (SE) rule-based which communicates with the SATD. The SE has been designed as an inference engine with an algorithm for effective action, using a modus ponens rule model of goal-oriented rules.The pilot test demonstrated that it is possible to govern in real time the machining process based on rules contained in a SE. The tests have been done with approximated rules. Future work includes an exhaustive collection of data with different tool materials and geometries in a database to extract more precise rules.

Impact of clinical decision rules on clinical care of traumatic injuries to the foot and ankle, knee, cervical spine, and head.

PubMed

Perry, Jeffrey J; Stiell, Ian G

2006-12-01

Traumatic injuries to the ankle/foot, knee, cervical spine, and head are very commonly seen in emergency and accident departments around the world. There has been much interest in the development of clinical decision rules to help guide the investigations of these patients in a standardised and cost-effective manner. In this article we reviewed the impact of the Ottawa ankle rules, Ottawa knee rules, Canadian C-spine rule and the Canadian CT head rule. The studies conducted have confirmed that the use of well developed clinical decision rules results in less radiography, less time spent in the emergency department and does not decrease patient satisfaction or result in misdiagnosis. Emergency physicians around the world should adopt the use of clinical decision rules for ankle/foot, knee, cervical spine and minor head injuries. With relatively simple implementation strategies, care can be standardized and costs reduced while providing excellent clinical care.

International Rules for Precollege Science Research: Guidelines for Science and Engineering Fairs, 2007-2008

ERIC Educational Resources Information Center

Science Service, 2007

2007-01-01

This publication presents changes and modifications for 2007-2008 to the "International Rules for Precollege Science Research: Guidelines for Science and Engineering Fairs." It is written to guide fair directors, teachers, scientists, parents, and adult volunteers as they pursue their work of encouraging students to explore and investigate their…

International Rules for Precollege Science Research: Guidelines for Science and Engineering Fairs, 2006-2007

ERIC Educational Resources Information Center

Science Service, 2006

2006-01-01

This publication presents changes and modifications for 2006-2007 to the "International Rules for Precollege Science Research: Guidelines for Science and Engineering Fairs." It is written to guide fair directors, teachers, scientists, parents, and adult volunteers as they pursue their work of encouraging students to explore and investigate their…

A Software Engine to Justify the Conclusions of an Expert System for Detecting Renal Obstruction on 99mTc-MAG3 Scans

PubMed Central

Garcia, Ernest V.; Taylor, Andrew; Manatunga, Daya; Folks, Russell

2013-01-01

The purposes of this study were to describe and evaluate a software engine to justify the conclusions reached by a renal expert system (RENEX) for assessing patients with suspected renal obstruction and to obtain from this evaluation new knowledge that can be incorporated into RENEX to attempt to improve diagnostic performance. Methods RENEX consists of 60 heuristic rules extracted from the rules used by a domain expert to generate the knowledge base and a forward-chaining inference engine to determine obstruction. The justification engine keeps track of the sequence of the rules that are instantiated to reach a conclusion. The interpreter can then request justification by clicking on the specific conclusion. The justification process then reports the English translation of all concatenated rules instantiated to reach that conclusion. The justification engine was evaluated with a prospective group of 60 patients (117 kidneys). After reviewing the standard renal mercaptoacetyltriglycine (MAG3) scans obtained before and after the administration of furosemide, a masked expert determined whether each kidney was obstructed, whether the results were equivocal, or whether the kidney was not obstructed and identified and ranked the main variables associated with each interpretation. Two parameters were then tabulated: the frequency with which the main variables associated with obstruction by the expert were also justified by RENEX and the frequency with which the justification rules provided by RENEX were deemed to be correct by the expert. Only when RENEX and the domain expert agreed on the diagnosis (87 kidneys) were the results used to test the justification. Results RENEX agreed with 91% (184/203) of the rules supplied by the expert for justifying the diagnosis. RENEX provided 103 additional rules justifying the diagnosis; the expert agreed that 102 (99%) were correct, although the rules were considered to be of secondary importance. Conclusion We have described and evaluated a software engine to justify the conclusions of RENEX for detecting renal obstruction with MAG3 renal scans obtained before and after the administration of furosemide. This tool is expected to increase physician confidence in the interpretations provided by RENEX and to assist physicians and trainees in gaining a higher level of expertise. PMID:17332625

A software engine to justify the conclusions of an expert system for detecting renal obstruction on 99mTc-MAG3 scans.

PubMed

Garcia, Ernest V; Taylor, Andrew; Manatunga, Daya; Folks, Russell

2007-03-01

The purposes of this study were to describe and evaluate a software engine to justify the conclusions reached by a renal expert system (RENEX) for assessing patients with suspected renal obstruction and to obtain from this evaluation new knowledge that can be incorporated into RENEX to attempt to improve diagnostic performance. RENEX consists of 60 heuristic rules extracted from the rules used by a domain expert to generate the knowledge base and a forward-chaining inference engine to determine obstruction. The justification engine keeps track of the sequence of the rules that are instantiated to reach a conclusion. The interpreter can then request justification by clicking on the specific conclusion. The justification process then reports the English translation of all concatenated rules instantiated to reach that conclusion. The justification engine was evaluated with a prospective group of 60 patients (117 kidneys). After reviewing the standard renal mercaptoacetyltriglycine (MAG3) scans obtained before and after the administration of furosemide, a masked expert determined whether each kidney was obstructed, whether the results were equivocal, or whether the kidney was not obstructed and identified and ranked the main variables associated with each interpretation. Two parameters were then tabulated: the frequency with which the main variables associated with obstruction by the expert were also justified by RENEX and the frequency with which the justification rules provided by RENEX were deemed to be correct by the expert. Only when RENEX and the domain expert agreed on the diagnosis (87 kidneys) were the results used to test the justification. RENEX agreed with 91% (184/203) of the rules supplied by the expert for justifying the diagnosis. RENEX provided 103 additional rules justifying the diagnosis; the expert agreed that 102 (99%) were correct, although the rules were considered to be of secondary importance. We have described and evaluated a software engine to justify the conclusions of RENEX for detecting renal obstruction with MAG3 renal scans obtained before and after the administration of furosemide. This tool is expected to increase physician confidence in the interpretations provided by RENEX and to assist physicians and trainees in gaining a higher level of expertise.

14 CFR 21.4 - ETOPS reporting requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... with more than two engines, the system must be in place for the first 250,000 world fleet engine-hours... place for the first 250,000 world fleet engine-hours for the approved airplane-engine combination and after that until— (i) The world fleet 12-month rolling average IFSD rate is at or below the rate...

Application of State Analysis and Goal-based Operations to a MER Mission Scenario

NASA Technical Reports Server (NTRS)

Morris, John Richard; Ingham, Michel D.; Mishkin, Andrew H.; Rasmussen, Robert D.; Starbird, Thomas W.

2006-01-01

State Analysis is a model-based systems engineering methodology employing a rigorous discovery process which articulates operations concepts and operability needs as an integrated part of system design. The process produces requirements on system and software design in the form of explicit models which describe the system behavior in terms of state variables and the relationships among them. By applying State Analysis to an actual MER flight mission scenario, this study addresses the specific real world challenges of complex space operations and explores technologies that can be brought to bear on future missions. The paper first describes the tools currently used on a daily basis for MER operations planning and provides an in-depth description of the planning process, in the context of a Martian day's worth of rover engineering activities, resource modeling, flight rules, science observations, and more. It then describes how State Analysis allows for the specification of a corresponding goal-based sequence that accomplishes the same objectives, with several important additional benefits.

Application of State Analysis and Goal-Based Operations to a MER Mission Scenario

NASA Technical Reports Server (NTRS)

Morris, J. Richard; Ingham, Michel D.; Mishkin, Andrew H.; Rasmussen, Robert D.; Starbird, Thomas W.

2006-01-01

State Analysis is a model-based systems engineering methodology employing a rigorous discovery process which articulates operations concepts and operability needs as an integrated part of system design. The process produces requirements on system and software design in the form of explicit models which describe the behavior of states and the relationships among them. By applying State Analysis to an actual MER flight mission scenario, this study addresses the specific real world challenges of complex space operations and explores technologies that can be brought to bear on future missions. The paper describes the tools currently used on a daily basis for MER operations planning and provides an in-depth description of the planning process, in the context of a Martian day's worth of rover engineering activities, resource modeling, flight rules, science observations, and more. It then describes how State Analysis allows for the specification of a corresponding goal-based sequence that accomplishes the same objectives, with several important additional benefits.

30 CFR 250.612 - Field well-workover rules.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 2 2011-07-01 2011-07-01 false Field well-workover rules. 250.612 Section 250... Well-Workover Operations § 250.612 Field well-workover rules. When geological and engineering..., field well-workover rules may be established on the District Manager's initiative or in response to a...

30 CFR 250.512 - Field well-completion rules.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 2 2011-07-01 2011-07-01 false Field well-completion rules. 250.512 Section... Gas Well-Completion Operations § 250.512 Field well-completion rules. When geological and engineering..., field well-completion rules may be established on the District Manager's initiative or in response to a...

76 FR 35378 - Installation and Use of Engine Cut-Off Switches on Recreational Vehicles

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-17

... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Parts 175 and 183 [Docket No. USCG-2009-0206] RIN 1825-AB34 Installation and Use of Engine Cut-Off Switches on Recreational Vehicles Correction Proposed Rule document 2011-14140 was inadvertently published in the Rules section of the issue of June 8...

The New Rules: How To Succeed in Today's Post-Corporate World.

ERIC Educational Resources Information Center

Kotter, John P.

The new realities of today's postcorporate world and the new rules for achieving success were examined through a study of the career progress of a sample of 115 individuals who graduated from Harvard in 1974 with a Master's of Business Administration. The members of the study sample completed yearly questionnaires between January 1975 and 1992.…

ARROWSMITH-P: A prototype expert system for software engineering management

NASA Technical Reports Server (NTRS)

Basili, Victor R.; Ramsey, Connie Loggia

1985-01-01

Although the field of software engineering is relatively new, it can benefit from the use of expert systems. Two prototype expert systems were developed to aid in software engineering management. Given the values for certain metrics, these systems will provide interpretations which explain any abnormal patterns of these values during the development of a software project. The two systems, which solve the same problem, were built using different methods, rule-based deduction and frame-based abduction. A comparison was done to see which method was better suited to the needs of this field. It was found that both systems performed moderately well, but the rule-based deduction system using simple rules provided more complete solutions than did the frame-based abduction system.

The injury profile of Karate World Championships: new rules, less injuries.

PubMed

Arriaza, Rafael; Leyes, Manuel; Zaeimkohan, Hamid; Arriaza, Alvaro

2009-12-01

The aim of this paper is to document the injury rate in high-level modern competitive karate after a change of competition rules was implemented in the year 2000, and to compare it with the injury rate found before the rules were changed. A prospective recording of the injuries resulting from 2,762 matches in three consecutive World Karate Championships (representing 7,425 min of active fighting) was performed, and compared with the results from 2,837 matches from the three last World Karate Championships (representing 7,631 min of active fighting) held before the change of competition rules. In total, 497 injuries were recorded, with an incidence of 0.180 injuries per match or 6.7 per 100 min of active fighting. There were 1,901 male category fights (in which 383 injuries were recorded), and 861 female category fights (in which 114 injuries were recorded). The global injury incidence was almost double with the old rules compared to the one with the new rules [OR 1.99, 95% CI (1.76-2.26); p < 0.00001]. In male category, the risk of injury was higher before the rules were changed [OR 1.81, 95% CI (1.56-2.09); p < 0.00001], and also in female category [OR 2.71; 95% CI (2.64-2.80); p < 0.00001]. The rate of severe injuries was not different before and after the change of rules. The implementation of the new competition rules in competitive karate has been associated with a significant reduction in injury rate, making competition safer for athletes.

77 FR 9837 - Airworthiness Directives; Lycoming Engines Reciprocating Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-21

... Directives; Lycoming Engines Reciprocating Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: We are adopting a new airworthiness directive (AD) for certain Lycoming Engines reciprocating engines. This AD was prompted by a report of a ``machined-from-billet'' HA-6 carburetor having a...

77 FR 39623 - Airworthiness Standards: Aircraft Engines; Technical Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-05

...] Airworthiness Standards: Aircraft Engines; Technical Amendment AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; technical amendment. SUMMARY: This amendment clarifies aircraft engine... from applicants requesting FAA engine type certifications and aftermarket certifications, such as...

The World Health Organization, the drugs company, and the $10,000 funding offer.

PubMed

Day, Michael; Boseley, Sarah

2007-01-01

The World Health Organization faces allegations that it attempted to secure a $10,000 donation from a pharmaceutical company by asking a patients' group to act as a covert channel for the funds, an arrangement that would break the WHO's own rules on accepting money from the pharmaceutical industry. The WHO denies attempts to bend its donation rules.

Definition of the Engineering Method.

ERIC Educational Resources Information Center

Koen, Billy Vaughn

In an effort to more clearly define the engineering method, this document attempts to draw distinctions between engineering and science. Part I, "Some Thoughts on Engineering," discusses strategies that engineers employ to solve problems, and the characteristics of the types of engineering problems. Part II, "The Principal Rule of the Engineering…

Engineering Education in K-12 Schools

NASA Astrophysics Data System (ADS)

Spence, Anne

2013-03-01

Engineers rely on physicists as well as other scientists and mathematicians to explain the world in which we live. Engineers take this knowledge of the world and use it to create the world that never was. The teaching of physics and other sciences as well as mathematics is critical to maintaining our national workforce. Science and mathematics education are inherently different, however, from engineering education. Engineering educators seek to enable students to develop the habits of mind critical for innovation. Through understanding of the engineering design process and how it differs from the scientific method, students can apply problem and project based learning to solve the challenges facing society today. In this talk, I will discuss the elements critical to a solid K-12 engineering education that integrates science and mathematics to solve challenges throughout the world.

QA-driven Guidelines Generation for Bacteriotherapy

PubMed Central

Pasche, Emilie; Teodoro, Douglas; Gobeill, Julien; Ruch, Patrick; Lovis, Christian

2009-01-01

PURPOSE We propose a question-answering (QA) driven generation approach for automatic acquisition of structured rules that can be used in a knowledge authoring tool for antibiotic prescription guidelines management. METHODS: The rule generation is seen as a question-answering problem, where the parameters of the questions are known items of the rule (e.g. an infectious disease, caused by a given bacterium) and answers (e.g. some antibiotics) are obtained by a question-answering engine. RESULTS: When looking for a drug given a pathogen and a disease, top-precision of 0.55 is obtained by the combination of the Boolean engine (PubMed) and the relevance-driven engine (easyIR), which means that for more than half of our evaluation benchmark at least one of the recommended antibiotics was automatically acquired by the rule generation method. CONCLUSION: These results suggest that such an automatic text mining approach could provide a useful tool for guidelines management, by improving knowledge update and discovery. PMID:20351908

76 FR 64003 - Airworthiness Directives; WYTWORNIA SPRZETU KOMUNIKACYJNEGO (WSK) “PZL-RZESZOW”-SPOLKA AKCYJNA...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-17

... CONTACT: James Lawrence, Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller..., Manager, Engine and Propeller Directorate, Aircraft Certification Service. [FR Doc. 2011-26274 Filed 10-14... Turboshaft Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; correction...

77 FR 65434 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-26

... Effectiveness of Proposed Rule Change To Amend the Definition of ``Money Market Instrument'' in FINRA Rule 6710... ``Money Market Instrument'' in FINRA Rule 6710(o) of the Trade Reporting and Compliance Engine (TRACE... proposes to amend the definition of ``Money Market Instrument'' in FINRA Rule 6710(o) for purposes of the...

School Children's Reasoning about School Rules

ERIC Educational Resources Information Center

Thornberg, Robert

2008-01-01

School rules are usually associated with classroom management and school discipline. However, rules also define ways of thinking about oneself and the world. Rules are guidelines for actions and for the evaluation of actions in terms of good and bad, or right and wrong, and therefore a part of moral or values education in school. This study is a…

49 CFR Appendix B to Part 222 - Alternative Safety Measures

Code of Federal Regulations, 2010 CFR

2010-10-01

...-Engineering ASMs, and Engineering ASMs. Modified SSMs are SSMs that do not fully comply with the provisions... reduction credit for pre-existing modified SSMs under the final rule. Non-engineering ASMs consist of... reduce risk within a quiet zone. Engineering ASMs consist of engineering improvements that address...

49 CFR Appendix B to Part 222 - Alternative Safety Measures

Code of Federal Regulations, 2011 CFR

2011-10-01

...-Engineering ASMs, and Engineering ASMs. Modified SSMs are SSMs that do not fully comply with the provisions... reduction credit for pre-existing modified SSMs under the final rule. Non-engineering ASMs consist of... reduce risk within a quiet zone. Engineering ASMs consist of engineering improvements that address...

77 FR 76842 - Exhaust Emissions Standards for New Aircraft Gas Turbine Engines and Identification Plate for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-31

... Aircraft Gas Turbine Engines and Identification Plate for Aircraft Engines AGENCY: Federal Aviation... , compliance flexibilities, and other regulatory requirements for aircraft turbofan or turbojet engines with...)(v). 6. Standards for Supersonic Aircraft Turbine Engines This final rule contains carbon monoxide...

Machine Learning Techniques in Optimal Design

NASA Technical Reports Server (NTRS)

Cerbone, Giuseppe

1992-01-01

Many important applications can be formalized as constrained optimization tasks. For example, we are studying the engineering domain of two-dimensional (2-D) structural design. In this task, the goal is to design a structure of minimum weight that bears a set of loads. A solution to a design problem in which there is a single load (L) and two stationary support points (S1 and S2) consists of four members, E1, E2, E3, and E4 that connect the load to the support points is discussed. In principle, optimal solutions to problems of this kind can be found by numerical optimization techniques. However, in practice [Vanderplaats, 1984] these methods are slow and they can produce different local solutions whose quality (ratio to the global optimum) varies with the choice of starting points. Hence, their applicability to real-world problems is severely restricted. To overcome these limitations, we propose to augment numerical optimization by first performing a symbolic compilation stage to produce: (a) objective functions that are faster to evaluate and that depend less on the choice of the starting point and (b) selection rules that associate problem instances to a set of recommended solutions. These goals are accomplished by successive specializations of the problem class and of the associated objective functions. In the end, this process reduces the problem to a collection of independent functions that are fast to evaluate, that can be differentiated symbolically, and that represent smaller regions of the overall search space. However, the specialization process can produce a large number of sub-problems. This is overcome by deriving inductively selection rules which associate problems to small sets of specialized independent sub-problems. Each set of candidate solutions is chosen to minimize a cost function which expresses the tradeoff between the quality of the solution that can be obtained from the sub-problem and the time it takes to produce it. The overall solution to the problem, is then obtained by solving in parallel each of the sub-problems in the set and computing the one with the minimum cost. In addition to speeding up the optimization process, our use of learning methods also relieves the expert from the burden of identifying rules that exactly pinpoint optimal candidate sub-problems. In real engineering tasks it is usually too costly to the engineers to derive such rules. Therefore, this paper also contributes to a further step towards the solution of the knowledge acquisition bottleneck [Feigenbaum, 1977] which has somewhat impaired the construction of rulebased expert systems.

On nonstationarity-related errors in modal combination rules of the response spectrum method

NASA Astrophysics Data System (ADS)

Pathak, Shashank; Gupta, Vinay K.

2017-10-01

Characterization of seismic hazard via (elastic) design spectra and the estimation of linear peak response of a given structure from this characterization continue to form the basis of earthquake-resistant design philosophy in various codes of practice all over the world. Since the direct use of design spectrum ordinates is a preferred option for the practicing engineers, modal combination rules play central role in the peak response estimation. Most of the available modal combination rules are however based on the assumption that nonstationarity affects the structural response alike at the modal and overall response levels. This study considers those situations where this assumption may cause significant errors in the peak response estimation, and preliminary models are proposed for the estimation of the extents to which nonstationarity affects the modal and total system responses, when the ground acceleration process is assumed to be a stationary process. It is shown through numerical examples in the context of complete-quadratic-combination (CQC) method that the nonstationarity-related errors in the estimation of peak base shear may be significant, when strong-motion duration of the excitation is too small compared to the period of the system and/or the response is distributed comparably in several modes. It is also shown that these errors are reduced marginally with the use of the proposed nonstationarity factor models.

Robot navigation research using the HERMIES mobile robot

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barnett, D.L.

1989-01-01

In recent years robot navigation has attracted much attention from researchers around the world. Not only are theoretical studies being simulated on sophisticated computers, but many mobile robots are now used as test vehicles for these theoretical studies. Various algorithms have been perfected for navigation in a known static environment; but navigation in an unknown and dynamic environment poses a much more challenging problem for researchers. Many different methodologies have been developed for autonomous robot navigation, but each methodology is usually restricted to a particular type of environment. One important research focus of the Center for Engineering Systems Advanced researchmore » (CESAR) at Oak Ridge National Laboratory, is autonomous navigation in unknown and dynamic environments using the series of HERMIES mobile robots. The research uses an expert system for high-level planning interfaced with C-coded routines for implementing the plans, and for quick processing of data requested by the expert system. In using this approach, the navigation is not restricted to one methodology since the expert system can activate a rule module for the methodology best suited for the current situation. Rule modules can be added the rule base as they are developed and tested. Modules are being developed or enhanced for navigating from a map, searching for a target, exploring, artificial potential-field navigation, navigation using edge-detection, etc. This paper will report on the various rule modules and methods of navigation in use, or under development at CESAR, using the HERMIES-IIB robot as a testbed. 13 refs., 5 figs., 1 tab.« less

A study of diverse clinical decision support rule authoring environments and requirements for integration

PubMed Central

2012-01-01

Background Efficient rule authoring tools are critical to allow clinical Knowledge Engineers (KEs), Software Engineers (SEs), and Subject Matter Experts (SMEs) to convert medical knowledge into machine executable clinical decision support rules. The goal of this analysis was to identify the critical success factors and challenges of a fully functioning Rule Authoring Environment (RAE) in order to define requirements for a scalable, comprehensive tool to manage enterprise level rules. Methods The authors evaluated RAEs in active use across Partners Healthcare, including enterprise wide, ambulatory only, and system specific tools, with a focus on rule editors for reminder and medication rules. We conducted meetings with users of these RAEs to discuss their general experience and perceived advantages and limitations of these tools. Results While the overall rule authoring process is similar across the 10 separate RAEs, the system capabilities and architecture vary widely. Most current RAEs limit the ability of the clinical decision support (CDS) interventions to be standardized, sharable, interoperable, and extensible. No existing system meets all requirements defined by knowledge management users. Conclusions A successful, scalable, integrated rule authoring environment will need to support a number of key requirements and functions in the areas of knowledge representation, metadata, terminology, authoring collaboration, user interface, integration with electronic health record (EHR) systems, testing, and reporting. PMID:23145874

Engineering Education: The Key to a Sustainable Future

ERIC Educational Resources Information Center

Thomas, Jason

2012-01-01

It is obvious that engineering played a significant role in the development of the world. Many contributions engineers have given are visible in the world and in people's daily lives. Unfortunately, humans often learn through trial and error, and much of the world has been developed in ways that did not contribute to the well-being of the planet…

Automation based on knowledge modeling theory and its applications in engine diagnostic systems using Space Shuttle Main Engine vibrational data. M.S. Thesis

NASA Technical Reports Server (NTRS)

Kim, Jonnathan H.

1995-01-01

Humans can perform many complicated tasks without explicit rules. This inherent and advantageous capability becomes a hurdle when a task is to be automated. Modern computers and numerical calculations require explicit rules and discrete numerical values. In order to bridge the gap between human knowledge and automating tools, a knowledge model is proposed. Knowledge modeling techniques are discussed and utilized to automate a labor and time intensive task of detecting anomalous bearing wear patterns in the Space Shuttle Main Engine (SSME) High Pressure Oxygen Turbopump (HPOTP).

30 CFR 250.512 - Field well-completion rules.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 2 2013-07-01 2013-07-01 false Field well-completion rules. 250.512 Section... OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Well-Completion Operations § 250.512 Field well-completion rules. When geological and engineering information available in a...

30 CFR 250.512 - Field well-completion rules.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 2 2012-07-01 2012-07-01 false Field well-completion rules. 250.512 Section... OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Well-Completion Operations § 250.512 Field well-completion rules. When geological and engineering information available in a...

30 CFR 250.512 - Field well-completion rules.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 2 2014-07-01 2014-07-01 false Field well-completion rules. 250.512 Section... OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Well-Completion Operations § 250.512 Field well-completion rules. When geological and engineering information available in a...

Partial Withdrawal and Final Rule for Nonroad Technical Amendments

EPA Pesticide Factsheets

Amendments to the technical hardship provisions under the Transition Program for Equipment Manufacturers related to the Tier 4 standards for nonroad diesel engines, and to the replacement engine exemption generally applicable to new nonroad engines.

Model-Unified Planning and Execution for Distributed Autonomous System Control

NASA Technical Reports Server (NTRS)

Aschwanden, Pascal; Baskaran, Vijay; Bernardini, Sara; Fry, Chuck; Moreno, Maria; Muscettola, Nicola; Plaunt, Chris; Rijsman, David; Tompkins, Paul

2006-01-01

The Intelligent Distributed Execution Architecture (IDEA) is a real-time architecture that exploits artificial intelligence planning as the core reasoning engine for interacting autonomous agents. Rather than enforcing separate deliberation and execution layers, IDEA unifies them under a single planning technology. Deliberative and reactive planners reason about and act according to a single representation of the past, present and future domain state. The domain state behaves the rules dictated by a declarative model of the subsystem to be controlled, internal processes of the IDEA controller, and interactions with other agents. We present IDEA concepts - modeling, the IDEA core architecture, the unification of deliberation and reaction under planning - and illustrate its use in a simple example. Finally, we present several real-world applications of IDEA, and compare IDEA to other high-level control approaches.

The BAA observatories and the origins of the instrument collection

NASA Astrophysics Data System (ADS)

Marriott, R. A.

2007-12-01

Within a few months of the founding of the Association in 1890 October, the membership numbered several hundred amateur and professional astronomers in Britain and around the world. International recognition was also marked by a number of eminent speakers at meetings, including the instrument maker John A. Brashear, of Allegheny, Pennsylvania. In 1888 Brashear had toured the British Isles and Europe, visiting observatories and meeting many eminent astronomers. He seems to have been impressed with everyone he met - particularly British amateurs - and during his second visit to England in 1892 he spoke at the Association's meeting on April 27. In 1890 December he presented to the Association a speculum-metal diffraction grating which had been prepared at his own works and ruled on Henry Rowland's engine at Johns Hopkins University, Baltimore.

Learning the Task Management Space of an Aircraft Approach Model

NASA Technical Reports Server (NTRS)

Krall, Joseph; Menzies, Tim; Davies, Misty

2014-01-01

Validating models of airspace operations is a particular challenge. These models are often aimed at finding and exploring safety violations, and aim to be accurate representations of real-world behavior. However, the rules governing the behavior are quite complex: nonlinear physics, operational modes, human behavior, and stochastic environmental concerns all determine the responses of the system. In this paper, we present a study on aircraft runway approaches as modeled in Georgia Tech's Work Models that Compute (WMC) simulation. We use a new learner, Genetic-Active Learning for Search-Based Software Engineering (GALE) to discover the Pareto frontiers defined by cognitive structures. These cognitive structures organize the prioritization and assignment of tasks of each pilot during approaches. We discuss the benefits of our approach, and also discuss future work necessary to enable uncertainty quantification.

Common-Sense Rule Inference

NASA Astrophysics Data System (ADS)

Lombardi, Ilaria; Console, Luca

In the paper we show how rule-based inference can be made more flexible by exploiting semantic information associated with the concepts involved in the rules. We introduce flexible forms of common sense reasoning in which whenever no rule applies to a given situation, the inference engine can fire rules that apply to more general or to similar situations. This can be obtained by defining new forms of match between rules and the facts in the working memory and new forms of conflict resolution. We claim that in this way we can overcome some of the brittleness problems that are common in rule-based systems.

Enhancements to the Engine Data Interpretation System (EDIS)

NASA Technical Reports Server (NTRS)

Hofmann, Martin O.

1993-01-01

The Engine Data Interpretation System (EDIS) expert system project assists the data review personnel at NASA/MSFC in performing post-test data analysis and engine diagnosis of the Space Shuttle Main Engine (SSME). EDIS uses knowledge of the engine, its components, and simple thermodynamic principles instead of, and in addition to, heuristic rules gathered from the engine experts. EDIS reasons in cooperation with human experts, following roughly the pattern of logic exhibited by human experts. EDIS concentrates on steady-state static faults, such as small leaks, and component degradations, such as pump efficiencies. The objective of this contract was to complete the set of engine component models, integrate heuristic rules into EDIS, integrate the Power Balance Model into EDIS, and investigate modification of the qualitative reasoning mechanisms to allow 'fuzzy' value classification. The results of this contract is an operational version of EDIS. EDIS will become a module of the Post-Test Diagnostic System (PTDS) and will, in this context, provide system-level diagnostic capabilities which integrate component-specific findings provided by other modules.

Enhancements to the Engine Data Interpretation System (EDIS)

NASA Technical Reports Server (NTRS)

Hofmann, Martin O.

1993-01-01

The Engine Data Interpretation System (EDIS) expert system project assists the data review personnel at NASA/MSFC in performing post-test data analysis and engine diagnosis of the Space Shuttle Main Engine (SSME). EDIS uses knowledge of the engine, its components, and simple thermodynamic principles instead of, and in addition to, heuristic rules gathered from the engine experts. EDIS reasons in cooperation with human experts, following roughly the pattern of logic exhibited by human experts. EDIS concentrates on steady-state static faults, such as small leaks, and component degradations, such as pump efficiencies. The objective of this contract was to complete the set of engine component models, integrate heuristic rules into EDIS, integrate the Power Balance Model into EDIS, and investigate modification of the qualitative reasoning mechanisms to allow 'fuzzy' value classification. The result of this contract is an operational version of EDIS. EDIS will become a module of the Post-Test Diagnostic System (PTDS) and will, in this context, provide system-level diagnostic capabilities which integrate component-specific findings provided by other modules.

Properties of four real world collaboration--competition networks

NASA Astrophysics Data System (ADS)

Fu, Chun-Hua; Xu, Xiu-Lian; He, Da-Ren

2009-03-01

Our research group has empirically investigated 9 real world collaboration networks and 25 real world cooperation-competition networks. Among the 34 real world systems, all the 9 real world collaboration networks and 6 real world cooperation-competition networks show the unimodal act-size distribution and the shifted power law distribution of degree and act-degree. We have proposed a collaboration network evolution model for an explanation of the rules [1]. The other 14 real world cooperation-competition networks show that the act-size distributions are not unimodal; instead, they take qualitatively the same shifted power law forms as the degree and act-degree distributions. The properties of four systems (the main land movie film network, Beijing restaurant network, 2004 Olympic network, and Tao-Bao notebook computer sale network) are reported in detail as examples. Via a numerical simulation, we show that the new rule can still be explained by the above-mentioned model. [1] H. Chang, B. B. Su, et al. Phsica A, 2007, 383: 687-702.

International Rules for Precollege Science Research: Guidelines for Science Fairs. June 1995-May 1996.

ERIC Educational Resources Information Center

Science Service, Inc., Washington, DC.

This document presents the international rules for precollege science research. Sections include: (1) Quick Rules Reference; (2) Highlights for 1995-96; (3) International Science and Engineering Fair (ISEF) Category Descriptions; (4) Display and Safety Regulations; (5) Eligibility; (6) Requirements; (7) Limitations; (8) Continuation of Projects;…

30 CFR 250.612 - Field well-workover rules.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 2 2013-07-01 2013-07-01 false Field well-workover rules. 250.612 Section 250... OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Well-Workover Operations § 250.612 Field well-workover rules. When geological and engineering information available in a...

30 CFR 250.612 - Field well-workover rules.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 2 2012-07-01 2012-07-01 false Field well-workover rules. 250.612 Section 250... OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Well-Workover Operations § 250.612 Field well-workover rules. When geological and engineering information available in a...

30 CFR 250.612 - Field well-workover rules.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 2 2014-07-01 2014-07-01 false Field well-workover rules. 250.612 Section 250... OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Well-Workover Operations § 250.612 Field well-workover rules. When geological and engineering information available in a...

Rule-based simulation models

NASA Technical Reports Server (NTRS)

Nieten, Joseph L.; Seraphine, Kathleen M.

1991-01-01

Procedural modeling systems, rule based modeling systems, and a method for converting a procedural model to a rule based model are described. Simulation models are used to represent real time engineering systems. A real time system can be represented by a set of equations or functions connected so that they perform in the same manner as the actual system. Most modeling system languages are based on FORTRAN or some other procedural language. Therefore, they must be enhanced with a reaction capability. Rule based systems are reactive by definition. Once the engineering system has been decomposed into a set of calculations using only basic algebraic unary operations, a knowledge network of calculations and functions can be constructed. The knowledge network required by a rule based system can be generated by a knowledge acquisition tool or a source level compiler. The compiler would take an existing model source file, a syntax template, and a symbol table and generate the knowledge network. Thus, existing procedural models can be translated and executed by a rule based system. Neural models can be provide the high capacity data manipulation required by the most complex real time models.

RB-ARD: A proof of concept rule-based abort

NASA Technical Reports Server (NTRS)

Smith, Richard; Marinuzzi, John

1987-01-01

The Abort Region Determinator (ARD) is a console program in the space shuttle mission control center. During shuttle ascent, the Flight Dynamics Officer (FDO) uses the ARD to determine the possible abort modes and make abort calls for the crew. The goal of the Rule-based Abort region Determinator (RB/ARD) project was to test the concept of providing an onboard ARD for the shuttle or an automated ARD for the mission control center (MCC). A proof of concept rule-based system was developed on a LMI Lambda computer using PICON, a knowdedge-based system shell. Knowdedge derived from documented flight rules and ARD operation procedures was coded in PICON rules. These rules, in conjunction with modules of conventional code, enable the RB-ARD to carry out key parts of the ARD task. Current capabilities of the RB-ARD include: continuous updating of the available abort mode, recognition of a limited number of main engine faults and recommendation of safing actions. Safing actions recommended by the RB-ARD concern the Space Shuttle Main Engine (SSME) limit shutdown system and powerdown of the SSME Ac buses.

Analysis, Simulation, and Verification of Knowledge-Based, Rule-Based, and Expert Systems

NASA Technical Reports Server (NTRS)

Hinchey, Mike; Rash, James; Erickson, John; Gracanin, Denis; Rouff, Chris

2010-01-01

Mathematically sound techniques are used to view a knowledge-based system (KBS) as a set of processes executing in parallel and being enabled in response to specific rules being fired. The set of processes can be manipulated, examined, analyzed, and used in a simulation. The tool that embodies this technology may warn developers of errors in their rules, but may also highlight rules (or sets of rules) in the system that are underspecified (or overspecified) and need to be corrected for the KBS to operate as intended. The rules embodied in a KBS specify the allowed situations, events, and/or results of the system they describe. In that sense, they provide a very abstract specification of a system. The system is implemented through the combination of the system specification together with an appropriate inference engine, independent of the algorithm used in that inference engine. Viewing the rule base as a major component of the specification, and choosing an appropriate specification notation to represent it, reveals how additional power can be derived from an approach to the knowledge-base system that involves analysis, simulation, and verification. This innovative approach requires no special knowledge of the rules, and allows a general approach where standardized analysis, verification, simulation, and model checking techniques can be applied to the KBS.

78 FR 44199 - Semiannual Regulatory Agenda, Spring 2013

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-23

..., interstate movement, and environmental release of certain genetically engineered organisms. This rule will... genetically engineered plants and certain other genetically engineered organisms. Timetable: Action Date FR... Citrus Canker; 0579-AC05 Compensation for Certified Citrus Nursery Stock. 17 Introduction of Organisms...

Final Rule for Control of Air Pollution From Aircraft and Aircraft Engines; Emission Standards and Test Procedures

EPA Pesticide Factsheets

EPA adopted emission standards and related provisions for aircraft gas turbine engines with rated thrusts greater than 26.7 kilonewtons. These engines are used primarily on commercial passenger and freight aircraft.

Verification and Validation of KBS with Neural Network Components

NASA Technical Reports Server (NTRS)

Wen, Wu; Callahan, John

1996-01-01

Artificial Neural Network (ANN) play an important role in developing robust Knowledge Based Systems (KBS). The ANN based components used in these systems learn to give appropriate predictions through training with correct input-output data patterns. Unlike traditional KBS that depends on a rule database and a production engine, the ANN based system mimics the decisions of an expert without specifically formulating the if-than type of rules. In fact, the ANNs demonstrate their superiority when such if-then type of rules are hard to generate by human expert. Verification of traditional knowledge based system is based on the proof of consistency and completeness of the rule knowledge base and correctness of the production engine.These techniques, however, can not be directly applied to ANN based components.In this position paper, we propose a verification and validation procedure for KBS with ANN based components. The essence of the procedure is to obtain an accurate system specification through incremental modification of the specifications using an ANN rule extraction algorithm.

Usage of the Jess Engine, Rules and Ontology to Query a Relational Database

NASA Astrophysics Data System (ADS)

Bak, Jaroslaw; Jedrzejek, Czeslaw; Falkowski, Maciej

We present a prototypical implementation of a library tool, the Semantic Data Library (SDL), which integrates the Jess (Java Expert System Shell) engine, rules and ontology to query a relational database. The tool extends functionalities of previous OWL2Jess with SWRL implementations and takes full advantage of the Jess engine, by separating forward and backward reasoning. The optimization of integration of all these technologies is an advancement over previous tools. We discuss the complexity of the query algorithm. As a demonstration of capability of the SDL library, we execute queries using crime ontology which is being developed in the Polish PPBW project.

Development of an expert system for assessing trumpeter swan breeding habitat in the Northern Rocky Mountains.

USGS Publications Warehouse

Sojda, Richard S.; Cornely, John E.; Howe, Adele E.

2002-01-01

A decision support system for the management of the Rocky Mountain Population of Trumpeter Swans (Cygnus buccinators) is being developed. As part of this, three expert systems are also in development: one for assessing the quality of Trumpeter Swan breeding habitat; one for making water level recommendations in montane, palustrine wetlands; and one for assessing the contribution a particular site can make towards meeting objectives from as flyway perspective. The focus of this paper is the development of the breeding habitat expert system, which currently consists of 157 rules. Out purpose is to provide decision support for issues that appear to be beyond the capability of a single persons to conceptualize and solve. We propose that by involving multiple experts in the development and use of the systems, management will be significantly improved. The knowledge base for the expert system has been developed using standard knowledge engineering techniques with a small team of ecological experts. Knowledge was then coded using production rules organized in decision trees using a commercial expert system development shell. The final system has been deployed on the world wide web.

Compartmental and Spatial Rule-Based Modeling with Virtual Cell.

PubMed

Blinov, Michael L; Schaff, James C; Vasilescu, Dan; Moraru, Ion I; Bloom, Judy E; Loew, Leslie M

2017-10-03

In rule-based modeling, molecular interactions are systematically specified in the form of reaction rules that serve as generators of reactions. This provides a way to account for all the potential molecular complexes and interactions among multivalent or multistate molecules. Recently, we introduced rule-based modeling into the Virtual Cell (VCell) modeling framework, permitting graphical specification of rules and merger of networks generated automatically (using the BioNetGen modeling engine) with hand-specified reaction networks. VCell provides a number of ordinary differential equation and stochastic numerical solvers for single-compartment simulations of the kinetic systems derived from these networks, and agent-based network-free simulation of the rules. In this work, compartmental and spatial modeling of rule-based models has been implemented within VCell. To enable rule-based deterministic and stochastic spatial simulations and network-free agent-based compartmental simulations, the BioNetGen and NFSim engines were each modified to support compartments. In the new rule-based formalism, every reactant and product pattern and every reaction rule are assigned locations. We also introduce the rule-based concept of molecular anchors. This assures that any species that has a molecule anchored to a predefined compartment will remain in this compartment. Importantly, in addition to formulation of compartmental models, this now permits VCell users to seamlessly connect reaction networks derived from rules to explicit geometries to automatically generate a system of reaction-diffusion equations. These may then be simulated using either the VCell partial differential equations deterministic solvers or the Smoldyn stochastic simulator. Copyright © 2017 Biophysical Society. Published by Elsevier Inc. All rights reserved.

Cargo liability regimes

DOT National Transportation Integrated Search

2001-01-01

There are at present at least three international regimes of maritime cargo liability in force in different countries of the world - the original Hague rules (1924), the updated version known as the Hague-Visby rules (1968, further amended 1979), and...

14 CFR 125.377 - Fuel supply: Turbine-engine-powered airplanes other than turbopropeller.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AIRCRAFT Flight Release Rules § 125.377 Fuel supply: Turbine-engine-powered airplanes other than... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Fuel supply: Turbine-engine-powered... or take off a turbine-engine powered airplane (other than a turbopropeller-powered airplane) unless...

14 CFR 125.377 - Fuel supply: Turbine-engine-powered airplanes other than turbopropeller.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AIRCRAFT Flight Release Rules § 125.377 Fuel supply: Turbine-engine-powered airplanes other than... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Fuel supply: Turbine-engine-powered... or take off a turbine-engine powered airplane (other than a turbopropeller-powered airplane) unless...

49 CFR 535.9 - Enforcement approach.

Code of Federal Regulations, 2012 CFR

2012-10-01

... balance is based upon the engines or vehicles performance above or below the applicable regulatory... consumption data for vehicles or engines covered under this rule, noncompliance will be assumed until... NHTSA Enforcement determines that a manufacturer's averaging set of vehicles or engines fails to comply...

76 FR 73596 - Notice of Scope Rulings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-29

... LLC and OTR Wheel Engineering, Inc.; its wheel hub units/assemblies with tapered roller bearings are...-601: Tapered Roller Bearings from the People's Republic of China Requestor: New Trend Engineering... Requestor: OTR Wheel Engineering, Inc. (``OTR Wheel''); whether OTR Wheel's ``Trac Master'' and ``Traction...

Education Based on the Rule of St. Benedict: Centuries-Old Rule Still Relevant Today.

ERIC Educational Resources Information Center

Kollar, Rene (OSB)

2003-01-01

Discusses how the concept of Catholic education dates to the early days of the church and how the rule of St. Benedict impacts present day Catholic schools. Gives a historical overview and explains how the era of St. Benedict is an important issue to consider in a secular and depersonalized world. (MZ)

[THE SIGNIFICANCE OF THE LEGAL PERSPECTIVE - THE LEGAL WORLD'S CONTRIBUTION TO THE MEDICAL WORLD].

PubMed

Sigler-Harcavi, Alona; Cohen Ashkenazi, Limor

2018-04-01

Working with medical and paramedical teams has taught us that the medical staff does not fully utilize the potential of judicial decisions and precedents as a source for learning, drawing conclusions and motivating progress. Judicial ruling is an essential part of the toolbox used by medical administrators in general, and healthcare risk managers in particular. Knowing the relevant legal rulings, before you embark on any given path, is the equivalent of looking before you leap. This is not necessarily an issue of "holy scripture", but should mainly be considered as a source for expanding your perspective. Knowledge of the relevant rulings has many advantages that stem from the unique characteristics of the legal system. While the medical world has a clear and unequivocal advantage regarding knowledge and experience with respect to medicine, the legal world has various other advantages: a different and wider perspective with respect to economic and/or political considerations; universal fundamental principles, such as autonomy, equality, distributive justice, human dignity, the state's obligations to its citizens; complex systems of checks and balances, such as: desirable vs. available, the benefit of few vs. the good of the many, etc. These tools, typical of the legal world, are especially relevant to medicolegal issues, usually associated with medical administration, such as: the obligation of consultation, obligation of follow-up, treatment continuity, priorities, resource distribution, patient rights, etc. The contribution of the legal world to these issues is both unique and essential. Those who question the ability of judges to understand the medical world and to materially contribute to medical thinking and practice, claiming that they lack medical training and experience, should recognize the diverse contribution of the legal world to the medical world.

76 FR 55553 - Airworthiness Standards; Rotor Overspeed Requirements; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-08

... concerning this final rule, contact Tim Mouzakis, Engine and Propeller Directorate Standards Staff, ANE-111, Engine and Propeller Directorate, Federal Aviation Administration, 12 New England Executive Park...

An application of object-oriented knowledge representation to engineering expert systems

NASA Technical Reports Server (NTRS)

Logie, D. S.; Kamil, H.; Umaretiya, J. R.

1990-01-01

The paper describes an object-oriented knowledge representation and its application to engineering expert systems. The object-oriented approach promotes efficient handling of the problem data by allowing knowledge to be encapsulated in objects and organized by defining relationships between the objects. An Object Representation Language (ORL) was implemented as a tool for building and manipulating the object base. Rule-based knowledge representation is then used to simulate engineering design reasoning. Using a common object base, very large expert systems can be developed, comprised of small, individually processed, rule sets. The integration of these two schemes makes it easier to develop practical engineering expert systems. The general approach to applying this technology to the domain of the finite element analysis, design, and optimization of aerospace structures is discussed.

Spiders and Worms and Crawlers, Oh My: Searching on the World Wide Web.

ERIC Educational Resources Information Center

Eagan, Ann; Bender, Laura

Searching on the world wide web can be confusing. A myriad of search engines exist, often with little or no documentation, and many of these search engines work differently from the standard search engines people are accustomed to using. Intended for librarians, this paper defines search engines, directories, spiders, and robots, and covers basics…

33 CFR 241.2 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... rule applies to all U.S. Army Corps of Engineers Headquarters (HQUSACE), elements and Major Subordinate Commands and District Commands of the Corps of Engineers having Civil Works Responsibilities. [60 FR 5133....2 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE...

15 CFR 801.10 - Rules and regulations for the BE-120, Benchmark Survey of Transactions in Selected Services and...

Code of Federal Regulations, 2012 CFR

2012-01-01

... engineering services; industrial-type maintenance, installation, alteration, and training services; legal... services; (17) Financial services (purchases only); (18) Industrial engineering services; (19) Industrial...; educational and training services; engineering, architectural, and surveying services; financial services...

The strategies of local farmers' water management and the eco-hydrological effects of irrigation-drainage engineering systems in world heritage of Honghe Hani Rice Terraces

NASA Astrophysics Data System (ADS)

Gao, Xuan

2017-04-01

Terraces are built in mountainous regions to provide larger area for cultivation,in which the hydrological and geomorphological processes are impacted by local farmers' water management strategies and are modified by manmade irrigation-drainage engineering systems.The Honghe Hani Rice Terraces is a 1300a history of traditional agricultural landscape that was inscribed in the 2013 World Heritage List.The local farmers had developed systematic water management strategies and built perfect irrigation-drainage engineering systems to adapt the local rainfall pattern and rice farming activities.Through field investigation,interviews,combined with Geographic Information Systems,Remote Sensing images and Global Positioning Systems technology,the water management strategies as well as the irrigation-drainage systems and their impacts on eco-hydrological process were studied,the results indicate:Firstly,the local people created and maintained an unique woodcarving allocating management system of irrigating water over hundreds years,which aids distributing water and natural nutrition to each terrace field evenly,and regularly according to cultivation schedule.Secondly,the management of local people play an essential role in effective irrigation-drainage engineering system.A ditch leader takes charge of managing the ditch of their village,keeping ample amount of irrigation water,repairing broken parts of ditches,dealing with unfair water using issues,and so on.Meanwhile,some traditional leaders of minority also take part in.Thus, this traditional way of irrigation-drainage engineering has bringed Hani people around 1300 years of rice harvest for its eco-hydrological effects.Lastly we discuss the future of Honghe Hani Rice Terraces,the traditional cultivation pattern has been influenced by the rapid development of modern civilization,in which some related changes such as the new equipment of county roads and plastic channels and the water overusing by tourism are not totally rely on eco-hydrological engineering rules,which broke the ecosystem stability of agricultural terraces.The current situation of Honghe Hani Rice Terraces heritage cannot completely meets the purpose of sustainability development and appropriate conservation of Honghe Hani Rice Terraces heritage.This study of traditional cultivation pattern can help us to propose rational solutions for future development of terraces heritages. Key words:Honghe Hani Rice Terraces,water management,eco-hydrological effects,heritage conservation

Developmental engineering: a new paradigm for the design and manufacturing of cell-based products. Part II: from genes to networks: tissue engineering from the viewpoint of systems biology and network science.

PubMed

Lenas, Petros; Moos, Malcolm; Luyten, Frank P

2009-12-01

The field of tissue engineering is moving toward a new concept of "in vitro biomimetics of in vivo tissue development." In Part I of this series, we proposed a theoretical framework integrating the concepts of developmental biology with those of process design to provide the rules for the design of biomimetic processes. We named this methodology "developmental engineering" to emphasize that it is not the tissue but the process of in vitro tissue development that has to be engineered. To formulate the process design rules in a rigorous way that will allow a computational design, we should refer to mathematical methods to model the biological process taking place in vitro. Tissue functions cannot be attributed to individual molecules but rather to complex interactions between the numerous components of a cell and interactions between cells in a tissue that form a network. For tissue engineering to advance to the level of a technologically driven discipline amenable to well-established principles of process engineering, a scientifically rigorous formulation is needed of the general design rules so that the behavior of networks of genes, proteins, or cells that govern the unfolding of developmental processes could be related to the design parameters. Now that sufficient experimental data exist to construct plausible mathematical models of many biological control circuits, explicit hypotheses can be evaluated using computational approaches to facilitate process design. Recent progress in systems biology has shown that the empirical concepts of developmental biology that we used in Part I to extract the rules of biomimetic process design can be expressed in rigorous mathematical terms. This allows the accurate characterization of manufacturing processes in tissue engineering as well as the properties of the artificial tissues themselves. In addition, network science has recently shown that the behavior of biological networks strongly depends on their topology and has developed the necessary concepts and methods to describe it, allowing therefore a deeper understanding of the behavior of networks during biomimetic processes. These advances thus open the door to a transition for tissue engineering from a substantially empirical endeavor to a technology-based discipline comparable to other branches of engineering.

National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines

EPA Pesticide Factsheets

This page contains the current National Emission Standards for Hazardous Air Pollutants (NESHAP) for Reciprocating Internal Combustion Engines and additional information regarding rule compliance and implementation.

14 CFR 121.645 - Fuel supply: Turbine-engine powered airplanes, other than turbo propeller: Flag and supplemental...

Code of Federal Regulations, 2010 CFR

2010-01-01

... specifications, no person may release for flight or takeoff a turbine-engine powered airplane (other than a turbo... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Fuel supply: Turbine-engine powered... SUPPLEMENTAL OPERATIONS Dispatching and Flight Release Rules § 121.645 Fuel supply: Turbine-engine powered...

14 CFR 121.645 - Fuel supply: Turbine-engine powered airplanes, other than turbo propeller: Flag and supplemental...

Code of Federal Regulations, 2011 CFR

2011-01-01

... specifications, no person may release for flight or takeoff a turbine-engine powered airplane (other than a turbo... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Fuel supply: Turbine-engine powered... SUPPLEMENTAL OPERATIONS Dispatching and Flight Release Rules § 121.645 Fuel supply: Turbine-engine powered...

Proposed Rule and Related Materials for Control of Emissions of Air Pollution From Nonroad Diesel Engines Control of Air Pollution From Aircraft and Aircraft Engines; Proposed Emission Standards and Test Procedures

EPA Pesticide Factsheets

EPA is proposing to adopt emission standards and related provisions for aircraft gas turbine engines with rated thrusts greater than 26.7 kilonewtons. These engines are used primarily on commercial passenger and freight aircraft.

Creative Strategic Intelligence Analysis and Decision Making Within the Elements of National Power. Proteus Futures Workshop, held Carlise, PA on 14-16 Aug 2007

DTIC Science & Technology

2007-08-01

Professor Ayers suggests the facts have been present since 1979 and the initiation of Khomeini’s objectives: Islamic Rule over Iran, expanding Islamic Rule ...Dajjal (Anti-Christ), establish Islam as the global religion, and rule the world for seven to nine years. True believers are to seek out martyrdom for...without the need for new rules and constructs. He uses the same rules and analysis that he applies to physical combat and pleads that we should stop

75 FR 47520 - Standards of Performance for Stationary Compression Ignition and Spark Ignition Internal...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-06

... Ignition Internal Combustion Engines AGENCY: Environmental Protection Agency (EPA). ACTION: Extension of... for stationary compression ignition and spark ignition internal combustion engines. In this [[Page... combustion engines. After publication of the proposed rule, EPA received requests from the American Petroleum...

A network-oriented business modeling environment

NASA Astrophysics Data System (ADS)

Bisconti, Cristian; Storelli, Davide; Totaro, Salvatore; Arigliano, Francesco; Savarino, Vincenzo; Vicari, Claudia

The development of formal models related to the organizational aspects of an enterprise is fundamental when these aspects must be re-engineered and digitalized, especially when the enterprise is involved in the dynamics and value flows of a business network. Business modeling provides an opportunity to synthesize and make business processes, business rules and the structural aspects of an organization explicit, allowing business managers to control their complexity and guide an enterprise through effective decisional and strategic activities. This chapter discusses the main results of the TEKNE project in terms of software components that enable enterprises to configure, store, search and share models of any aspects of their business while leveraging standard and business-oriented technologies and languages to bridge the gap between the world of business people and IT experts and to foster effective business-to-business collaborations.

Keys to Taking Your Nanotech Inventions to the Market

NASA Astrophysics Data System (ADS)

Rickert, Scott

Although many scientists and engineers may wish to be an owner of something they invented, and then take that something to the market, there are many obstacles to do so. Many of these roadblocks are self-imposed, and many more are there because most of us are not aware of the very strict rules that exist in the world of marketing, selling, and manufacturing in the United States. This lecture will identify a small subset of these obstacles and discuss some ways to overcome them. Belief in your goals is most important, and this belief must be shared by others, or you cannot succeed. Believe it or not, no one wants to steal your ideas or inventions. They would much rather have you take it to market yourself. This really is a lecture about winning.

An Ada inference engine for expert systems

NASA Technical Reports Server (NTRS)

Lavallee, David B.

1986-01-01

The purpose is to investigate the feasibility of using Ada for rule-based expert systems with real-time performance requirements. This includes exploring the Ada features which give improved performance to expert systems as well as optimizing the tradeoffs or workarounds that the use of Ada may require. A prototype inference engine was built using Ada, and rule firing rates in excess of 500 per second were demonstrated on a single MC68000 processor. The knowledge base uses a directed acyclic graph to represent production lines. The graph allows the use of AND, OR, and NOT logical operators. The inference engine uses a combination of both forward and backward chaining in order to reach goals as quickly as possible. Future efforts will include additional investigation of multiprocessing to improve performance and creating a user interface allowing rule input in an Ada-like syntax. Investigation of multitasking and alternate knowledge base representations will help to analyze some of the performance issues as they relate to larger problems.

Harmonization of anti-doping rules in a global context (World Anti-Doping Agency-laboratory accreditation perspective).

PubMed

Ivanova, Victoria; Miller, John H M; Rabin, Olivier; Squirrell, Alan; Westwood, Steven

2012-07-01

This article provides a review of the leading role of the World Anti-Doping Agency (WADA) in the context of the global fight against doping in sport and the harmonization of anti-doping rules worldwide through the implementation of the World Anti-Doping Program. Particular emphasis is given to the WADA-laboratory accreditation program, which is coordinated by the Science Department of WADA in conjunction with the Laboratory Expert Group, and the cooperation with the international accreditation community through International Laboratory Accreditation Cooperation and other organizations, all of which contribute to constant improvement of laboratory performance in the global fight against doping in sport. A perspective is provided of the means to refine the existing anti-doping rules and programs to ensure continuous improvement in order to face growing sophisticated challenges. A viewpoint on WADA's desire to embrace cooperation with other international organizations whose knowledge can contribute to the fight against doping in sport is acknowledged.

Is ``the Theory of Everything'' Merely the Ultimate Ensemble Theory?

NASA Astrophysics Data System (ADS)

Tegmark, Max

1998-11-01

We discuss some physical consequences of what might be called "the ultimate ensemble theory,", where not only worlds corresponding to say different sets of initial data or different physical constants are considered equally real, but also worlds ruled by altogether different equations. The only postulate in this theory is that all structures that exist mathematically exist also physically, by which we mean that in those complex enough to contain self-aware substructures (SASs), these SASs will subjectively perceive themselves as existing in a physically "real" world. We find that it is far from clear that this simple theory, which has no free parameters whatsoever, is observationally ruled out. The predictions of the theory take the form of probability distributions for the outcome of experiments, which makes it testable. In addition, it may be possible to rule it out by comparing its a priori predictions for the observable attributes of nature (the particle masses, the dimensionality of spacetime, etc.) with what is observed.

40 CFR Appendix A to Subpart S of... - Interpretive Ruling for § 85.1803-Remedial Plans

Code of Federal Regulations, 2010 CFR

2010-07-01

...—Remedial Plans The purpose of this rule is to set forth EPA's interpretation regarding one aspect of a... Clean Air Act, 42 U.S.C. 7641(c)(1). This rule will provide guidance to vehicle and engine manufacturers... conform to the regulations prescribed under section 202 when in actual use throughout their useful lives...

33 CFR 210.4 - Rules of the Corps of Engineers Board of Contract Appeals for cases not subject to the Contract...

Code of Federal Regulations, 2012 CFR

2012-07-01

... order of appeals and other pertinent factors. On request or motion by either party and upon good cause... thereof. (x) Rule 23, Post hearing briefs—(1) General. Briefs must be compact, concise, logically arranged... be dismissed with prejudice. (gg) Rule 32, Ex Parte communications. No Administrative Judge or member...

33 CFR 210.4 - Rules of the Corps of Engineers Board of Contract Appeals for cases not subject to the Contract...

Code of Federal Regulations, 2011 CFR

2011-07-01

... order of appeals and other pertinent factors. On request or motion by either party and upon good cause... thereof. (x) Rule 23, Post hearing briefs—(1) General. Briefs must be compact, concise, logically arranged... be dismissed with prejudice. (gg) Rule 32, Ex Parte communications. No Administrative Judge or member...

33 CFR 210.4 - Rules of the Corps of Engineers Board of Contract Appeals for cases not subject to the Contract...

Code of Federal Regulations, 2010 CFR

2010-07-01

... order of appeals and other pertinent factors. On request or motion by either party and upon good cause... thereof. (x) Rule 23, Post hearing briefs—(1) General. Briefs must be compact, concise, logically arranged... be dismissed with prejudice. (gg) Rule 32, Ex Parte communications. No Administrative Judge or member...

33 CFR 210.4 - Rules of the Corps of Engineers Board of Contract Appeals for cases not subject to the Contract...

Code of Federal Regulations, 2013 CFR

2013-07-01

... order of appeals and other pertinent factors. On request or motion by either party and upon good cause... thereof. (x) Rule 23, Post hearing briefs—(1) General. Briefs must be compact, concise, logically arranged... be dismissed with prejudice. (gg) Rule 32, Ex Parte communications. No Administrative Judge or member...

33 CFR 210.4 - Rules of the Corps of Engineers Board of Contract Appeals for cases not subject to the Contract...

Code of Federal Regulations, 2014 CFR

2014-07-01

... order of appeals and other pertinent factors. On request or motion by either party and upon good cause... thereof. (x) Rule 23, Post hearing briefs—(1) General. Briefs must be compact, concise, logically arranged... be dismissed with prejudice. (gg) Rule 32, Ex Parte communications. No Administrative Judge or member...

Proposed Rule for Modification of Federal On Board Diagnostic Regulations for: Light Duty Vehicles, Light Duty Trucks, Medium Duty Passenger Vehicles, Complete Heavy Duty Vehicles and Engines Intended for Use in Heavy Duty Vehicles Weighing 14,000 Pounds

EPA Pesticide Factsheets

Following is information for the proposed rule for the Modification of Federal On Board Diagnostic Regulations for Light-Duty Vehicles, Light-Duty Trucks, etc. Includes links to Federal Register and final rule.

Evaluating Machine Learning Classifiers for Hybrid Network Intrusion Detection Systems

DTIC Science & Technology

2015-03-26

7 VRT Vulnerability Research Team...and the Talos (formerly the Vulnerability Research Team ( VRT )) [7] 7 ruleset libraries are the two leading rulesets in use. Both libraries offer paid...rule sets to load for the signature-based IDS. Snort is selected as the IDS engine using the “ VRT and ET No/GPL” rule set. The total rule count in the

Cognitive Development of Applying the Chain Rule through Three Worlds of Mathematics

ERIC Educational Resources Information Center

Kabael, Tangul Uygur

2010-01-01

The derivative of a composite function, taken with the chain rule is one of the important notions in calculus. This paper describes a study conducted in Turkey that shows that the chain rule was given with the formula in function notation and/or the Leibniz notation without relating these formulas to life-related problem situations in the…

THE MAN MADE WORLD, TEACHER'S MANUAL.

ERIC Educational Resources Information Center

Commission on Engineering Education, Washington, DC.

THIS TEACHER'S MANUAL FOR THE ENGINEERING CONCEPTS CURRICULUM PROJECT'S HIGH SCHOOL COURSE, "THE MAN MADE WORLD," IS THE THIRD DRAFT OF THE EXPERIMENTAL VERSION. THE MATERIAL WRITTEN BY ENGINEERS, SCIENTISTS, AND EDUCATORS, EMPHASIZES ENGINEERING--MAN'S APPLICATION OF SCIENTIFIC PRINCIPLES TO THE CONTROL AND UTILIZATION OF HIS ENVIRONMENT.…

Infusing Real World Experiences into Engineering Education

ERIC Educational Resources Information Center

National Academies Press, 2012

2012-01-01

The aim of this report is to encourage enhanced richness and relevance of the undergraduate engineering education experience, and thus produce better-prepared and more globally competitive graduates, by providing practical guidance for incorporating real world experience in US engineering programs. The report, a collaborative effort of the…

"Genetic Engineering" Gains Momentum (Science/Society Case Study).

ERIC Educational Resources Information Center

Moore, John W.; Moore, Elizabeth A., Eds.

1980-01-01

Reviews the benefits and hazards of genetic engineering, or "recombinant-DNA" research. Recent federal safety rules issued by NIH which ease the strict prohibitions on recombinant-DNA research are explained. (CS)

Hydraulic integration and shrub growth form linked across continental aridity gradients.

Treesearch

H. Jochen Schenk; Susana Espino; Christine M. Goedhart; Marisa Nordenstahl; Hugo I. Martinez Cabrera; Cynthia S. Jones

2009-01-01

Both engineered hydraulic systems and plant hydraulic systems are protected against failure by resistance, reparability, and redundancy. A basic rule of reliability engineering is that the level of...

WellnessRules: A Web 3.0 Case Study in RuleML-Based Prolog-N3 Profile Interoperation

NASA Astrophysics Data System (ADS)

Boley, Harold; Osmun, Taylor Michael; Craig, Benjamin Larry

An interoperation study, WellnessRules, is described, where rules about wellness opportunities are created by participants in rule languages such as Prolog and N3, and translated within a wellness community using RuleML/XML. The wellness rules are centered around participants, as profiles, encoding knowledge about their activities conditional on the season, the time-of-day, the weather, etc. This distributed knowledge base extends FOAF profiles with a vocabulary and rules about wellness group networking. The communication between participants is organized through Rule Responder, permitting wellness-profile translation and distributed querying across engines. WellnessRules interoperates between rules and queries in the relational (Datalog) paradigm of the pure-Prolog subset of POSL and in the frame (F-logic) paradigm of N3. An evaluation of Rule Responder instantiated for WellnessRules revealed acceptable Web response times.

An Introduction to Thermal-Fluid Engineering

NASA Astrophysics Data System (ADS)

Warhaft, Zellman

1998-01-01

This text is the first to provide an integrated introduction to basic engineering topics and the social implications of engineering practice. Aimed at beginning engineering students, the book presents the basic ideas of thermodynamics, fluid mechanics, heat transfer, and combustion through a real-world engineering situation. It relates the engine to the atmosphere in which it moves and exhausts its waste products. The book also discusses the greenhouse effect and atmospheric inversions, and the social implications of engineering in a crowded world with increasing energy demands. Students in mechanical, civil, agricultural, environmental, aerospace, and chemical engineering will welcome this engaging, well-illustrated introduction to thermal-fluid engineering.

Search Engines on the World Wide Web.

ERIC Educational Resources Information Center

Walster, Dian

1997-01-01

Discusses search engines and provides methods for determining what resources are searched, the quality of the information, and the algorithms used that will improve the use of search engines on the World Wide Web, online public access catalogs, and electronic encyclopedias. Lists strategies for conducting searches and for learning about the latest…

Future Directions for Engineering Education: System Response to a Changing World.

ERIC Educational Resources Information Center

Massachusetts Inst. of Tech., Cambridge. Center for Policy Alternatives.

This report consolidates information on the engineering population - numbers, employment patterns, educational levels, personality, technical obsolescence - and probes the implications of current social and employment trends. Included are: data and analyses of the engineering education system seen in the context of the changing world; the…

NASA Engineer Jerry Elliott: Drawing from Two Worlds.

ERIC Educational Resources Information Center

Larson, Arwen

1994-01-01

Profiles Jerry Elliott, an American Indian who has taken advantage of both Native American and white cultures to become a successful engineer at NASA. He believes that Native Americans can meet the challenges of a modern world by studying science and engineering without losing their cultural identity and values. (LP)

26 CFR 1.263A-0 - Outline of regulations under section 263A.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Utilities. (O) Repairs and maintenance. (P) Engineering and design costs. (Q) Spoilage. (R) Tools and...) Engineering and design services. (F) Safety engineering services. (v) Accounting method change. (h) Simplified... mixed service costs. (7) Costs allocable to more than one business. (8) De minimis rule. (9) Separate...

26 CFR 1.263A-0 - Outline of regulations under section 263A.

Code of Federal Regulations, 2012 CFR

2012-04-01

...) Utilities. (O) Repairs and maintenance. (P) Engineering and design costs. (Q) Spoilage. (R) Tools and...) Engineering and design services. (F) Safety engineering services. (v) Accounting method change. (h) Simplified... mixed service costs. (7) Costs allocable to more than one business. (8) De minimis rule. (9) Separate...

26 CFR 1.263A-0 - Outline of regulations under section 263A.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Utilities. (O) Repairs and maintenance. (P) Engineering and design costs. (Q) Spoilage. (R) Tools and...) Engineering and design services. (F) Safety engineering services. (v) Accounting method change. (h) Simplified... mixed service costs. (7) Costs allocable to more than one business. (8) De minimis rule. (9) Separate...

26 CFR 1.263A-0 - Outline of regulations under section 263A.

Code of Federal Regulations, 2013 CFR

2013-04-01

...) Utilities. (O) Repairs and maintenance. (P) Engineering and design costs. (Q) Spoilage. (R) Tools and...) Engineering and design services. (F) Safety engineering services. (v) Accounting method change. (h) Simplified... mixed service costs. (7) Costs allocable to more than one business. (8) De minimis rule. (9) Separate...

75 FR 8056 - California State Nonroad Engine Pollution Control Standards; California New Nonroad Compression...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-23

... maintenance intervals, recordkeeping, warranties, test procedures, certification test fuel, and engine useful... Control of Emissions of Air Pollution From Nonroad Diesel Engines and Fuel and EPA's Final Rule for Test... request for an authorization of its emission standards and accompanying test procedures for new nonroad...

78 FR 4038 - Critical Parts for Airplane Propellers

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-18

... requiring a system of processes to identify and manage these parts throughout their service life. This rule... engineering process, a manufacturing process, and a service management process for propeller critical parts... engineering process, to how the part is manufactured and to how the part is maintained in service. Engineering...

Final Rule for Phase 2 Emission Standards for New Nonroad Spark-Ignition Nonhandheld Engines At or Below 19 Kilowatts

EPA Pesticide Factsheets

Emission regulations to control emissions from new nonroad spark-ignition nonhandheld engines at or below 19 kilowatts (25 horsepower). These engines are used principally in lawn and garden equipment in applications such as lawnmowers and garden tractors.

78 FR 5726 - Nationwide Permit Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-28

... of Engineers Regulatory Home Page at http://www.usace.army.mil/Missions/CivilWorks/Regulatory... DEPARTMENT OF DEFENSE Department of the Army, Corps of Engineers 33 CFR Part 330 RIN 0710-AA60 Nationwide Permit Program AGENCY: U.S. Army Corps of Engineers, DoD. ACTION: Final rule. SUMMARY: The U.S...

Transformation of Graphical ECA Policies into Executable PonderTalk Code

NASA Astrophysics Data System (ADS)

Romeikat, Raphael; Sinsel, Markus; Bauer, Bernhard

Rules are becoming more and more important in business modeling and systems engineering and are recognized as a high-level programming paradigma. For the effective development of rules it is desired to start at a high level, e.g. with graphical rules, and to refine them into code of a particular rule language for implementation purposes later. An model-driven approach is presented in this paper to transform graphical rules into executable code in a fully automated way. The focus is on event-condition-action policies as a special rule type. These are modeled graphically and translated into the PonderTalk language. The approach may be extended to integrate other rule types and languages as well.

Proposed Rule for Repeal of Emission Requirements for Glider Vehicles, Glider Engines, and Glider Kits

EPA Pesticide Factsheets

Rule to finalize standards for medium- and heavy-duty vehicles that would improve fuel efficiency and cut carbon pollution to reduce the impacts of climate change, while bolstering energy security and spurring manufacturing innovation.

75 FR 7955 - Changes in Flood Elevation Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-23

... DEPARTMENT OF HOMELAND SECURITY Federal Emergency Management Agency 44 CFR Part 65 [Docket ID FEMA...: Federal Emergency Management Agency, DHS. ACTION: Interim rule. SUMMARY: This interim rule lists..., Engineering Management Branch, Mitigation Directorate, Federal Emergency Management Agency, 500 C Street SW...

On the Moon: NASA and Design Squad Team Up to Inspire a New Generation of Engineers. Engineering Challenges for School and Afterschool Programs, Grades 3-12. EG-2009-02-05-MSFC

ERIC Educational Resources Information Center

Lockwood, Jeff

2008-01-01

NASA (National Aeronautics and Space Administration) is one of the biggest employers of engineers in the world--about 90,000 among its own employees and its corporate partners. So it's not surprising that NASA wants kids to learn more about engineering, become interested in the things engineers do, and experience the world of engineering…

Searching the world wide Web

PubMed

Lawrence; Giles

1998-04-03

The coverage and recency of the major World Wide Web search engines was analyzed, yielding some surprising results. The coverage of any one engine is significantly limited: No single engine indexes more than about one-third of the "indexable Web," the coverage of the six engines investigated varies by an order of magnitude, and combining the results of the six engines yields about 3.5 times as many documents on average as compared with the results from only one engine. Analysis of the overlap between pairs of engines gives an estimated lower bound on the size of the indexable Web of 320 million pages.

The Labouring Sleepwalker: Evocation and Expression as Modes of Qualitative Educational Research

ERIC Educational Resources Information Center

Smeyers, Paul

2005-01-01

This paper deals with the highly personal way an individual makes sense of the world in a way that avoids the pitfalls of the so-called private language. For Wittgenstein following a rule can never mean just following another rule, though we do follow rules blindly. His idea of the "form of life" elicits that "what we do" refers to what we have…

Final Rule for Emission Standards for Locomotives and Locomotive Engines

EPA Pesticide Factsheets

In 1998, EPA promulgated final exhaust emission standards for oxides of nitrogen (NOx), hydrocarbons (HC), carbon monoxide (CO), particulate matter (PM) and smoke for newly manufactured and remanufactured locomotives and locomotive engines.

Economic principles in communication: an experimental study.

PubMed

De Jaegher, Kris; Rosenkranz, Stephanie; Weitzel, Utz

2014-12-21

This paper experimentally investigates how economic principles affect communication. In a simple sender-receiver game with common interests over payoffs, the sender can send a signal without a pre-given meaning in an infrequent or frequent state of the world. When the signal is costly, several theories (focal point theory, the intuitive criterion, evolutionary game theory) predict an efficient separating equilibrium, where the signal is sent in the infrequent state of the world (also referred to as Horn׳s rule). To analyze whether Horn׳s rule applies, and if so, which theory best explains it, we develop and test variants of the sender-receiver game where the theories generate discriminatory hypotheses. In costly signaling variants, our participants follow Horn׳s rule most of the time, in a manner that is best explained by focal point theory. In costless signaling variants, evolutionary game theory best explains our results. Here participants coordinate significantly more (less) often on a separating equilibrium where the signal is sent in the frequent state if they are primed to associate the absence of a signal with the infrequent (frequent) state of the world. We also find indications that a similar priming effect applies to costly signals. Thus, while the frequency with which participants follow Horn׳s rule in costly signaling variants is best explained by Horn׳s rule, the priming effect shows that some of our participants׳ behavior is best explained by evolutionary game theory even when signals are costly. Copyright © 2014 Elsevier Ltd. All rights reserved.

Direct Final Rule for Control of Air Pollution From Aircraft and Aircraft Engines; Emission Standards and Test Procedures

EPA Pesticide Factsheets

This rule will adopt the current voluntary NOx and CO emissions standards of the United Nations International Civil Aviation Organization (ICAO), bringing the United States aircraft standards into alignment with the international standards.

Revisions to the Clean Water Act Regulatory Definition of Discharge of Dredged Material; Final Rule

EPA Pesticide Factsheets

The U.S. Army Corps of Engineers (Corps) and the Environmental Protection Agency (EPA) promulgated a final rule Amending a Clean Water Act (CWA) section 404 regulation that defines the term discharge of dredged material.

The Mitigation Rule Retrospective: A Review of the 2008 Regulations Governing Compensatory Mitigation for Losses of Aquatic Resources

EPA Pesticide Factsheets

U.S. Army Corps of Engineers and EPA report summarizing the progress made in implementing the 2008 Mitigation Rule, including analysis of trends in aquatic resource impacts and compensation from 2010 through 2014.

Software Engineering Laboratory (SEL) relationships, models, and management rules

NASA Technical Reports Server (NTRS)

Decker, William; Hendrick, Robert; Valett, Jon D.

1991-01-01

Over 50 individual Software Engineering Laboratory (SEL) research results, extracted from a review of published SEL documentation, that can be applied directly to managing software development projects are captured. Four basic categories of results are defined and discussed - environment profiles, relationships, models, and management rules. In each category, research results are presented as a single page that summarizes the individual result, lists potential uses of the result by managers, and references the original SEL documentation where the result was found. The document serves as a concise reference summary of applicable research for SEL managers.

Finding Information on the World Wide Web: The Retrieval Effectiveness of Search Engines.

ERIC Educational Resources Information Center

Pathak, Praveen; Gordon, Michael

1999-01-01

Describes a study that examined the effectiveness of eight search engines for the World Wide Web. Calculated traditional information-retrieval measures of recall and precision at varying numbers of retrieved documents to use as the bases for statistical comparisons of retrieval effectiveness. Also examined the overlap between search engines.…

Careers | Argonne National Laboratory

Science.gov Websites

YouTube Google+ More Social Media » Jason Carter Mechanical Engineer Read more » Look at the world differently. At Argonne, we view the world from a different perspective. Our scientists and engineers conduct world-class research in clean energy, the environment, technology, national security and more. We're

Building a Genome Engineering Toolbox in Non-Model Prokaryotic Microbes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eckert, Carrie A; Freed, Emily; Smolinski, Sharon

The realization of a sustainable bioeconomy requires our ability to understand and engineer complex design principles for the development of platform organisms capable of efficient conversion of cheap and sustainable feedstocks (e.g. sunlight, CO2, non-food biomass) to biofuels and bioproducts at sufficient titers and costs. For model microbes such as E. coli, advances in DNA reading and writing technologies are driving adoption of new paradigms for engineering biological systems. Unfortunately, microbes with properties of interest for the utilization of cheap and renewable feedstocks such as photosynthesis, autotrophic growth, and cellulose degradation have very few, if any, genetic tools for metabolicmore » engineering. Therefore, it is important to begin to develop 'design rules' for building a genetic toolbox for novel microbes. Here, we present an overview of our current understanding of these rules for the genetic manipulation of prokaryotic microbes and available genetic tools to expand our ability to genetically engineer non-model systems.« less

Building a genome engineering toolbox in nonmodel prokaryotic microbes.

PubMed

Freed, Emily; Fenster, Jacob; Smolinski, Sharon L; Walker, Julie; Henard, Calvin A; Gill, Ryan; Eckert, Carrie A

2018-05-11

The realization of a sustainable bioeconomy requires our ability to understand and engineer complex design principles for the development of platform organisms capable of efficient conversion of cheap and sustainable feedstocks (e.g., sunlight, CO 2 , and nonfood biomass) into biofuels and bioproducts at sufficient titers and costs. For model microbes, such as Escherichia coli, advances in DNA reading and writing technologies are driving the adoption of new paradigms for engineering biological systems. Unfortunately, microbes with properties of interest for the utilization of cheap and renewable feedstocks, such as photosynthesis, autotrophic growth, and cellulose degradation, have very few, if any, genetic tools for metabolic engineering. Therefore, it is important to develop "design rules" for building a genetic toolbox for novel microbes. Here, we present an overview of our current understanding of these rules for the genetic manipulation of prokaryotic microbes and the available genetic tools to expand our ability to genetically engineer nonmodel systems. © 2018 Wiley Periodicals, Inc.

Shipment of spent nuclear fuel from U.S. Navy ships and submarines to the Idaho National Engineering Laboratory (INEL). Hearing before the Subcommittee on Nuclear Deterrence, Arms Control and Defense Intelligence of the Committee on Armed Services, United States Senate, One Hundred Third Congress, First Session, July 28, 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-12-31

The purpose of the hearing was to review the impact of the U.S. District Court of Idaho ruling prohibiting receipt of spent nuclear fuel by the Department of Energy (DOE). The court`s ruling enjoined the DOE from receiving spent nuclear fuel, including nuclear fuel from naval surface ships and submarines, at the Idaho National Engineering Laboratory until such time as the DOE completes an environmental impact statement on the transportation, shipment, processing, and storage of spent fuel. Statements of government officials are included. The text of the Court ruling is also included.

75 FR 3183 - Approval and Promulgation of Air Quality Implementation Plan: Kentucky; Approval Section 110(a)(1...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-20

...) Federal motor vehicle control program; (2) fleet turnover of automobiles; (3) low reid vapor pressure of... vehicles standard; (6) large nonroad diesel engines rule; (7) nonroad spark ignition engines and recreational engines standard; (8) point source emission reductions; (9) Air Products and Chemicals -21-157...

76 FR 57900 - Airworthiness Directives; WYTWORNIA SPRZETU KOMUNIKACYJNEGO (WSK) “PZL-RZESZOW”-SPOLKA AKCYJNA...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-19

... Turboshaft Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; request for... describes the unsafe condition as: An uncommanded engine in-flight shutdown of a PZL-10W has been recently reported. The investigation has shown that the uncommanded engine in-flight shutdown was due to excessive...

Adding to the Toolkit: Three Conceptual Tradeoffs

DTIC Science & Technology

2010-12-02

Greek philosophers Parmenides and Heraclites. In his essay titled, “Design and the Prospects of a Military Renaissance,” Paparone described the world...viewed by Parmenides as the objective world of scientific reproducibility, ruled by concrete knowledge and nomotheticism, or the philosophy of seeking...subjective world of uniqueness, locality, novelty, and conceptualism. Parmenides

Improved Learning in Aging: Implications for Education.

ERIC Educational Resources Information Center

Kramer, Deirdre A.

Three types of lay theories about the social world form a developmental sequence. Earlier developing theories are reorganized at the next level into a more inclusive, encompassing view of the world in order to make better predictions. The absolute thinker sees the world as fixed and unchanging, reasons with absolute rules, and has a narrow world…

CLIPS: A tool for corn disease diagnostic system and an aid to neural network for automated knowledge acquisition

NASA Technical Reports Server (NTRS)

Wu, Cathy; Taylor, Pam; Whitson, George; Smith, Cathy

1990-01-01

This paper describes the building of a corn disease diagnostic expert system using CLIPS, and the development of a neural expert system using the fact representation method of CLIPS for automated knowledge acquisition. The CLIPS corn expert system diagnoses 21 diseases from 52 symptoms and signs with certainty factors. CLIPS has several unique features. It allows the facts in rules to be broken down to object-attribute-value (OAV) triples, allows rule-grouping, and fires rules based on pattern-matching. These features combined with the chained inference engine result to a natural user query system and speedy execution. In order to develop a method for automated knowledge acquisition, an Artificial Neural Expert System (ANES) is developed by a direct mapping from the CLIPS system. The ANES corn expert system uses the same OAV triples in the CLIPS system for its facts. The LHS and RHS facts of the CLIPS rules are mapped into the input and output layers of the ANES, respectively; and the inference engine of the rules is imbedded in the hidden layer. The fact representation by OAC triples gives a natural grouping of the rules. These features allow the ANES system to automate rule-generation, and make it efficient to execute and easy to expand for a large and complex domain.

LIS Professionals as Knowledge Engineers.

ERIC Educational Resources Information Center

Poulter, Alan; And Others

1994-01-01

Considers the role of library and information science professionals as knowledge engineers. Highlights include knowledge acquisition, including personal experience, interviews, protocol analysis, observation, multidimensional sorting, printed sources, and machine learning; knowledge representation, including production rules and semantic nets;…

75 FR 52240 - Airworthiness Directives; Thielert Aircraft Engines GmbH (TAE) Models TAE 125-01 and TAE 125-02...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-25

..., 2010, or SB No. TM TAE 125-1011 P1, dated June 9, 2010, into any engine. FAA AD Differences (f) This AD... Airworthiness Directives; Thielert Aircraft Engines GmbH (TAE) Models TAE 125-01 and TAE 125-02-99 Reciprocating Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; request for comments...

76 FR 9963 - Airworthiness Directives; Thielert Aircraft Engines GmbH Models TAE 125-02-99 and TAE 125-02-114...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-23

... Airworthiness Directives; Thielert Aircraft Engines GmbH Models TAE 125-02-99 and TAE 125-02-114 Reciprocating Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: We are adopting a... condition, if not corrected, could lead to in-flight cases of engine shutdown. We are issuing this AD to...

A rule-based software test data generator

NASA Technical Reports Server (NTRS)

Deason, William H.; Brown, David B.; Chang, Kai-Hsiung; Cross, James H., II

1991-01-01

Rule-based software test data generation is proposed as an alternative to either path/predicate analysis or random data generation. A prototype rule-based test data generator for Ada programs is constructed and compared to a random test data generator. Four Ada procedures are used in the comparison. Approximately 2000 rule-based test cases and 100,000 randomly generated test cases are automatically generated and executed. The success of the two methods is compared using standard coverage metrics. Simple statistical tests showing that even the primitive rule-based test data generation prototype is significantly better than random data generation are performed. This result demonstrates that rule-based test data generation is feasible and shows great promise in assisting test engineers, especially when the rule base is developed further.

Final Rule for Greenhouse Gas Emissions Standards and Fuel Efficiency Standards for Medium- and Heavy-Duty Engines and Vehicles

EPA Pesticide Factsheets

EPA and National Highway Traffic SafetyAdministration (NHTSA) are each finalizing rules to establish a comprehensive Heavy-Duty National Program that will reduce greenhouse gas emissions and fuel consumption for onroad heavy-duty vehicles.

Assuring Structural Integrity in Army Systems

DTIC Science & Technology

1985-02-28

power plants are* I. American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code , Section III - Rules for Construction of Nuclear...Power Plant Components; 2. ASNE Boiler and Pressure Vessel Code , Section XI, Rules for In-Service Inspection of Nuclear Power Plant Components; and 3

15 CFR 1180.3 - General rule.

Code of Federal Regulations, 2010 CFR

2010-01-01

... ADMINISTRATION, DEPARTMENT OF COMMERCE TRANSFER BY FEDERAL AGENCIES OF SCIENTIFIC, TECHNICAL AND ENGINEERING INFORMATION TO THE NATIONAL TECHNICAL INFORMATION SERVICE § 1180.3 General rule. Unless an exception applies... funded research and development activities, and (b) A summary of the agency's new and on-going research...

Real-world exhaust temperature and engine load distributions of on-road heavy-duty diesel vehicles in various vocations.

PubMed

Boriboonsomsin, Kanok; Durbin, Thomas; Scora, George; Johnson, Kent; Sandez, Daniel; Vu, Alexander; Jiang, Yu; Burnette, Andrew; Yoon, Seungju; Collins, John; Dai, Zhen; Fulper, Carl; Kishan, Sandeep; Sabisch, Michael; Jackson, Doug

2018-06-01

Real-world vehicle and engine activity data were collected from 90 heavy-duty vehicles in California, United States, most of which have engine model year 2010 or newer and are equipped with selective catalytic reduction (SCR). The 90 vehicles represent 19 different groups defined by a combination of vocational use and geographic region. The data were collected using advanced data loggers that recorded vehicle speed, position (latitude and longitude), and more than 170 engine and aftertreatment parameters (including engine load and exhaust temperature) at the frequency of one Hz. This article presents plots of real-world exhaust temperature and engine load distributions for the 19 vehicle groups. In each plot, both frequency distribution and cumulative frequency distribution are shown. These distributions are generated using the aggregated data from all vehicle samples in each group.

Update on SLD Engineering Tools Development

NASA Technical Reports Server (NTRS)

Miller, Dean R.; Potapczuk, Mark G.; Bond, Thomas H.

2004-01-01

The airworthiness authorities (FAA, JAA, Transport Canada) will be releasing a draft rule in the 2006 timeframe concerning the operation of aircraft in a Supercooled Large Droplet (SLD) environment aloft. The draft rule will require aircraft manufacturers to demonstrate that their aircraft can operate safely in an SLD environment for a period of time to facilitate a safe exit from the condition. It is anticipated that aircraft manufacturers will require a capability to demonstrate compliance with this rule via experimental means (icing tunnels or tankers) and by analytical means (ice prediction codes). Since existing icing research facilities and analytical codes were not developed to account for SLD conditions, current engineering tools are not adequate to support compliance activities in SLD conditions. Therefore, existing capabilities need to be augmented to include SLD conditions. In response to this need, NASA and its partners conceived a strategy or Roadmap for developing experimental and analytical SLD simulation tools. Following review and refinement by the airworthiness authorities and other international research partners, this technical strategy has been crystallized into a project plan to guide the SLD Engineering Tool Development effort. This paper will provide a brief overview of the latest version of the project plan and technical rationale, and provide a status of selected SLD Engineering Tool Development research tasks which are currently underway.

Final Rule for Procedures for Testing Highway and Nonroad Engines and Omnibus Technical Amendments

EPA Pesticide Factsheets

This common set of test requirements is intended to streamline laboratory efforts for EPA and industry and to form the basis for internationally harmonized test procedures for nearly all categories of engines.

Motif formation and industry specific topologies in the Japanese business firm network

NASA Astrophysics Data System (ADS)

Maluck, Julian; Donner, Reik V.; Takayasu, Hideki; Takayasu, Misako

2017-05-01

Motifs and roles are basic quantities for the characterization of interactions among 3-node subsets in complex networks. In this work, we investigate how the distribution of 3-node motifs can be influenced by modifying the rules of an evolving network model while keeping the statistics of simpler network characteristics, such as the link density and the degree distribution, invariant. We exemplify this problem for the special case of the Japanese Business Firm Network, where a well-studied and relatively simple yet realistic evolving network model is available, and compare the resulting motif distribution in the real-world and simulated networks. To better approximate the motif distribution of the real-world network in the model, we introduce both subgraph dependent and global additional rules. We find that a specific rule that allows only for the merging process between nodes with similar link directionality patterns reduces the observed excess of densely connected motifs with bidirectional links. Our study improves the mechanistic understanding of motif formation in evolving network models to better describe the characteristic features of real-world networks with a scale-free topology.

Assessment of pilot workload - Converging measures from performance based, subjective and psychophysiological techniques

NASA Technical Reports Server (NTRS)

Kramer, Arthur F.; Sirevaag, Erik J.; Braune, Rolf

1986-01-01

This study explores the relationship between the P300 component of the event-related brain potential (ERP) and the processing demands of a complex real-world task. Seven male volunteers enrolled in an Instrument Flight Rule (IFR) aviation course flew a series of missions in a single engine fixed-based simulator. In dual task conditions subjects were also required to discriminate between two tones differing in frequency. ERPs time-locked to the tones, subjective effort ratings and overt performance measures were collected during two 45 min flights differing in difficulty (manipulated by varying both atmospheric conditions and instrument reliability). The more difficult flight was associated with poorer performance, increased subjective effort ratings, and smaller secondary task P300s. Within each flight, P300 amplitude was negatively correlated with deviations from command headings indicating that P300 amplitude was a sensitive workload metric both between and within the flight missions.

Implementing Artificial Intelligence Behaviors in a Virtual World

NASA Technical Reports Server (NTRS)

Krisler, Brian; Thome, Michael

2012-01-01

In this paper, we will present a look at the current state of the art in human-computer interface technologies, including intelligent interactive agents, natural speech interaction and gestural based interfaces. We describe our use of these technologies to implement a cost effective, immersive experience on a public region in Second Life. We provision our Artificial Agents as a German Shepherd Dog avatar with an external rules engine controlling the behavior and movement. To interact with the avatar, we implemented a natural language and gesture system allowing the human avatars to use speech and physical gestures rather than interacting via a keyboard and mouse. The result is a system that allows multiple humans to interact naturally with AI avatars by playing games such as fetch with a flying disk and even practicing obedience exercises using voice and gesture, a natural seeming day in the park.

A Wireless Sensor Network-Based Approach with Decision Support for Monitoring Lake Water Quality.

PubMed

Huang, Xiaoci; Yi, Jianjun; Chen, Shaoli; Zhu, Xiaomin

2015-11-19

Online monitoring and water quality analysis of lakes are urgently needed. A feasible and effective approach is to use a Wireless Sensor Network (WSN). Lake water environments, like other real world environments, present many changing and unpredictable situations. To ensure flexibility in such an environment, the WSN node has to be prepared to deal with varying situations. This paper presents a WSN self-configuration approach for lake water quality monitoring. The approach is based on the integration of a semantic framework, where a reasoner can make decisions on the configuration of WSN services. We present a WSN ontology and the relevant water quality monitoring context information, which considers its suitability in a pervasive computing environment. We also propose a rule-based reasoning engine that is used to conduct decision support through reasoning techniques and context-awareness. To evaluate the approach, we conduct usability experiments and performance benchmarks.

14 CFR 91.1109 - Aircraft maintenance: Inspection program.

Code of Federal Regulations, 2011 CFR

2011-01-01

... be in writing and include at least the following information: (1) Instructions and procedures for the... TRANSPORTATION (CONTINUED) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES Fractional.... The instructions and procedures must set forth in detail the parts and areas of the airframe, engines...

14 CFR 91.1109 - Aircraft maintenance: Inspection program.

Code of Federal Regulations, 2013 CFR

2013-01-01

... be in writing and include at least the following information: (1) Instructions and procedures for the... TRANSPORTATION (CONTINUED) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES Fractional.... The instructions and procedures must set forth in detail the parts and areas of the airframe, engines...

Final Rule for Greenhouse Gas Emissions and Fuel Efficiency Standards for Medium- and Heavy-Duty Engines and Vehicles - Phase 2

EPA Pesticide Factsheets

Rule to finalize standards for medium- and heavy-duty vehicles that would improve fuel efficiency and cut carbon pollution to reduce the impacts of climate change, while bolstering energy security and spurring manufacturing innovation.

30 CFR 250.1607 - Field rules.

Code of Federal Regulations, 2010 CFR

2010-07-01

... engineering information in a field enables a District Manager to determine specific operating requirements, field rules may be established for drilling, well completion, or well workover on the District Manager's... cause at any time upon the initiative of the District Manager or upon the request of a lessee. ...

Proposed Rule for Control of Air Pollution From New Motor Vehicles: Proposed Heavy-Duty Engine and Vehicle Standards and Highway Diesel Fuel Sulfur Control Requirements

EPA Pesticide Factsheets

Rule summary, CFR citations and additional resources concerning proposed new emission standards that will begin to take effect in 2007 and corresponding diesel fuel requirements that take effect in 2006.

75 FR 68215 - Direct Final Rule Staying Numeric Limitation for the Construction and Development Point Source...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-05

... required to obtain NPDES permit coverage and performing the following activities: Construction of buildings, including building, developing and general contracting. Heavy and civil 237 engineering construction... Rule Staying Numeric Limitation for the Construction and Development Point Source Category AGENCY...

MERCURY CONTROL TECHNOLOGY--A REVIEW

EPA Science Inventory

The U.S. Environmental Protection Agency has promulgated the Clean Air Mercury Rule (CAMR) to permanently cap and reduce mercury emissions in the U.S. This rule makes the U.S. the first country in the world to regulate mercury emissions from coal-fired power plants. The first p...

Querying phenotype-genotype relationships on patient datasets using semantic web technology: the example of Cerebrotendinous xanthomatosis.

PubMed

Taboada, María; Martínez, Diego; Pilo, Belén; Jiménez-Escrig, Adriano; Robinson, Peter N; Sobrido, María J

2012-07-31

Semantic Web technology can considerably catalyze translational genetics and genomics research in medicine, where the interchange of information between basic research and clinical levels becomes crucial. This exchange involves mapping abstract phenotype descriptions from research resources, such as knowledge databases and catalogs, to unstructured datasets produced through experimental methods and clinical practice. This is especially true for the construction of mutation databases. This paper presents a way of harmonizing abstract phenotype descriptions with patient data from clinical practice, and querying this dataset about relationships between phenotypes and genetic variants, at different levels of abstraction. Due to the current availability of ontological and terminological resources that have already reached some consensus in biomedicine, a reuse-based ontology engineering approach was followed. The proposed approach uses the Ontology Web Language (OWL) to represent the phenotype ontology and the patient model, the Semantic Web Rule Language (SWRL) to bridge the gap between phenotype descriptions and clinical data, and the Semantic Query Web Rule Language (SQWRL) to query relevant phenotype-genotype bidirectional relationships. The work tests the use of semantic web technology in the biomedical research domain named cerebrotendinous xanthomatosis (CTX), using a real dataset and ontologies. A framework to query relevant phenotype-genotype bidirectional relationships is provided. Phenotype descriptions and patient data were harmonized by defining 28 Horn-like rules in terms of the OWL concepts. In total, 24 patterns of SWQRL queries were designed following the initial list of competency questions. As the approach is based on OWL, the semantic of the framework adapts the standard logical model of an open world assumption. This work demonstrates how semantic web technologies can be used to support flexible representation and computational inference mechanisms required to query patient datasets at different levels of abstraction. The open world assumption is especially good for describing only partially known phenotype-genotype relationships, in a way that is easily extensible. In future, this type of approach could offer researchers a valuable resource to infer new data from patient data for statistical analysis in translational research. In conclusion, phenotype description formalization and mapping to clinical data are two key elements for interchanging knowledge between basic and clinical research.

76 FR 44245 - Special Conditions: Gulfstream Model GVI Airplane; Limit Engine Torque Loads for Sudden Engine...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-25

... Conditions No. 25-441-SC] Special Conditions: Gulfstream Model GVI Airplane; Limit Engine Torque Loads for... transient dynamic loads resulting from: (a) The loss of any fan, compressor, or turbine blade; and (b...;Federal Register / Vol. 76, No. 142 / Monday, July 25, 2011 / Rules and Regulations#0;#0; [[Page 44245...

78 FR 65554 - Exhaust Emission Standards for New Aircraft Turbine Engines and Identification Plate for Aircraft...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-01

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Parts 34 and 45 [Docket No.: FAA-2012-1333; Amendment No. 34-5A] RIN 2120-AK15 Exhaust Emission Standards for New Aircraft Turbine Engines and Identification Plate for Aircraft Engines Correction In rule document 2013-24712, appearing on...

14 CFR 121.645 - Fuel supply: Turbine-engine powered airplanes, other than turbo propeller: Flag and supplemental...

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Fuel supply: Turbine-engine powered airplanes, other than turbo propeller: Flag and supplemental operations. 121.645 Section 121.645 Aeronautics... SUPPLEMENTAL OPERATIONS Dispatching and Flight Release Rules § 121.645 Fuel supply: Turbine-engine powered...

14 CFR 121.645 - Fuel supply: Turbine-engine powered airplanes, other than turbo propeller: Flag and supplemental...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Fuel supply: Turbine-engine powered airplanes, other than turbo propeller: Flag and supplemental operations. 121.645 Section 121.645 Aeronautics... SUPPLEMENTAL OPERATIONS Dispatching and Flight Release Rules § 121.645 Fuel supply: Turbine-engine powered...

14 CFR 121.645 - Fuel supply: Turbine-engine powered airplanes, other than turbo propeller: Flag and supplemental...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Fuel supply: Turbine-engine powered airplanes, other than turbo propeller: Flag and supplemental operations. 121.645 Section 121.645 Aeronautics... SUPPLEMENTAL OPERATIONS Dispatching and Flight Release Rules § 121.645 Fuel supply: Turbine-engine powered...

76 FR 30023 - Pamlico Sound and Adjacent Waters, NC; Danger Zones for Marine Corps Operations

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-24

... DEPARTMENT OF DEFENSE Corps of Engineers, Department of the Army 33 CFR Part 334 Pamlico Sound and Adjacent Waters, NC; Danger Zones for Marine Corps Operations AGENCY: United States Army Corps of Engineers, DoD. ACTION: Final rule. SUMMARY: The U.S. Army Corps of Engineers is amending its regulations to...

Hydraulic integration and shrub growth form linked across continental aridity gradients

Treesearch

H. Jochen Schenk; Christine M. Goedhart; Marisa Nordenstahl; Hugo I. Martinez Cabrera; Cynthia S. Jones

2008-01-01

Both engineered hydraulic systems and plant hydraulic systems are protected against failure by resistance, reparability, and redundancy. A basic rule of reliability engineering is that the level of independent redundancy should increase with increasing risk of fatal system failure. Here we show that hydraulic systems of plants function as predicted by this engineering...

A World Order Perspective on Authoritarian Tendencies. World Order Models Project. Working Paper Number Ten.

ERIC Educational Resources Information Center

Falk, Richard A.

This paper discusses five main patterns of authoritarian government rule that are currently prominent in international society. The first pattern is "Brazilianization" which has evolved as a model for rightist, capitalist elites in the more industrialized countries of the Third World (e.g. Iran, Indonesia, and Argentina). A common feature of these…

The Rise and Fall of Democracies in Third World Societies. Studies in Third World Societies. Publication Number Twenty-Seven.

ERIC Educational Resources Information Center

Sutlive, Vinson H. Ed.; And Others

Topics concerned with the experiments and problems of self-rule in Third World societies are presented in nine essays. The essays are: (1) "Democracy in Iran: The Untenable Dream" (John D. Stempel); (2) "Afghanistan's Struggle for National Liberation" (Hafizullah Emadi); (3) "Turkey's Experience with Political…

76 FR 20231 - Airworthiness Directives; Honeywell International Inc. LTS101 Series Turboshaft Engines and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-12

... Turboprop Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: We are...-700A-1A turboprop engines with power turbine rotor, part number (P/N) 4-141-290-01, - 02, -03, -05, -06... and LTP101-600A-1A and LTP101-700A-1A Turboprop Engines (g) For LTS101-600A-2, -3, -3A, and LTS101...

Rule-based modeling with Virtual Cell

PubMed Central

Schaff, James C.; Vasilescu, Dan; Moraru, Ion I.; Loew, Leslie M.; Blinov, Michael L.

2016-01-01

Summary: Rule-based modeling is invaluable when the number of possible species and reactions in a model become too large to allow convenient manual specification. The popular rule-based software tools BioNetGen and NFSim provide powerful modeling and simulation capabilities at the cost of learning a complex scripting language which is used to specify these models. Here, we introduce a modeling tool that combines new graphical rule-based model specification with existing simulation engines in a seamless way within the familiar Virtual Cell (VCell) modeling environment. A mathematical model can be built integrating explicit reaction networks with reaction rules. In addition to offering a large choice of ODE and stochastic solvers, a model can be simulated using a network free approach through the NFSim simulation engine. Availability and implementation: Available as VCell (versions 6.0 and later) at the Virtual Cell web site (http://vcell.org/). The application installs and runs on all major platforms and does not require registration for use on the user’s computer. Tutorials are available at the Virtual Cell website and Help is provided within the software. Source code is available at Sourceforge. Contact: vcell_support@uchc.edu Supplementary information: Supplementary data are available at Bioinformatics online. PMID:27497444

A Local Learning Rule for Independent Component Analysis

PubMed Central

Isomura, Takuya; Toyoizumi, Taro

2016-01-01

Humans can separately recognize independent sources when they sense their superposition. This decomposition is mathematically formulated as independent component analysis (ICA). While a few biologically plausible learning rules, so-called local learning rules, have been proposed to achieve ICA, their performance varies depending on the parameters characterizing the mixed signals. Here, we propose a new learning rule that is both easy to implement and reliable. Both mathematical and numerical analyses confirm that the proposed rule outperforms other local learning rules over a wide range of parameters. Notably, unlike other rules, the proposed rule can separate independent sources without any preprocessing, even if the number of sources is unknown. The successful performance of the proposed rule is then demonstrated using natural images and movies. We discuss the implications of this finding for our understanding of neuronal information processing and its promising applications to neuromorphic engineering. PMID:27323661

The Royal Navy and British Security Policy.

DTIC Science & Technology

1983-12-01

supremacy were embodied in that fleet. Britannia ruled the waves around the world. -~ Sixty-six years later Rear Admiral Sandy Woodward went *into battle off...already sold to Australia and just over a dozen destroyers and frigates. Britannia ruled the waves around those remote islands only with great difficulty...with the Americans, vulnerability to mining and the costs in manpower and money that a larger force would require, ruled out the non-nuclear-powered

Development of an Alert System to Detect Drug Interactions with Herbal Supplements using Medical Record Data.

PubMed

Archer, Melissa; Proulx, Joshua; Shane-McWhorter, Laura; Bray, Bruce E; Zeng-Treitler, Qing

2014-01-01

While potential medication-to-medication interaction alerting engines exist in many clinical applications, few systems exist to automatically alert on potential medication to herbal supplement interactions. We have developed a preliminary knowledge base and rules alerting engine that detects 259 potential interactions between 9 supplements, 62 cardiac medications, and 19 drug classes. The rules engine takes into consideration 12 patient risk factors and 30 interaction warning signs to help determine which of three different alert levels to categorize each potential interaction. A formative evaluation was conducted with two clinicians to set initial thresholds for each alert level. Additional work is planned add more supplement interactions, risk factors, and warning signs as well as to continue to set and adjust the inputs and thresholds for each potential interaction.

76 FR 26976 - Proposed Flood Elevation Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-10

..., identified by Docket No. FEMA-B-1193, to Luis Rodriguez, Chief, Engineering Management Branch, Federal... Rodriguez, Chief, Engineering Management Branch, Federal Insurance and Mitigation Administration, Federal... Order 12988, Civil Justice Reform. This proposed rule meets the applicable standards of Executive Order...

75 FR 78647 - Proposed Flood Elevation Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-16

..., identified by Docket No. FEMA-B-1163, to Luis Rodriguez, Chief, Engineering Management Branch, Federal... Rodriguez, Chief, Engineering Management Branch, Federal Insurance and Mitigation Administration, Federal.... Executive Order 12988, Civil Justice Reform. This proposed rule meets the applicable standards of Executive...

75 FR 78664 - Proposed Flood Elevation Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-16

... submit comments, identified by Docket No. FEMA-B-1169, to Luis Rodriguez, Chief, Engineering Management... INFORMATION CONTACT: Luis Rodriguez, Chief, Engineering Management Branch, Federal Insurance and Mitigation..., Civil Justice Reform. This proposed rule meets the applicable standards of Executive Order 12988. List...

76 FR 3590 - Proposed Flood Elevation Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-20

..., identified by Docket No. FEMA-B-1171, to Luis Rodriguez, Chief, Engineering Management Branch, Federal... Rodriguez, Chief, Engineering Management Branch, Federal Insurance and Mitigation Administration, Federal..., Civil Justice Reform. This proposed rule meets the applicable standards of Executive Order 12988. List...

Proposed Rule for Amendments Related to: Tier 3 Motor Vehicle Emission and Fuel Standards, Nonroad Engine and Equipment

EPA Pesticide Factsheets

Link to Federal Register Notice from February 19, 2015 announcing Amendments Related to: Tier 3 Motor Vehicle Emission and Fuel Standards, Nonroad Engine and Equipment Programs, and MARPOL Annex VI Implementation.

76 FR 59960 - Proposed Flood Elevation Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-28

..., identified by Docket No. FEMA-B-1220, to Luis Rodriguez, Chief, Engineering Management Branch, Federal... Rodriguez, Chief, Engineering Management Branch, Federal Insurance and Mitigation Administration, Federal..., Civil Justice Reform. This proposed rule meets the applicable standards of Executive Order 12988. [[Page...

76 FR 19018 - Proposed Flood Elevation Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-06

..., identified by Docket No. FEMA-B-1179, to Luis Rodriguez, Chief, Engineering Management Branch, Federal... Rodriguez, Chief, Engineering Management Branch, Federal Insurance and Mitigation Administration, Federal..., Civil Justice Reform. This proposed rule meets the applicable standards of Executive Order 12988. List...

76 FR 19005 - Proposed Flood Elevation Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-06

..., identified by Docket No. FEMA-B-1187, to Luis Rodriguez, Chief, Engineering Management Branch, Federal... Rodriguez, Chief, Engineering Management Branch, Federal Insurance and Mitigation Administration, Federal..., Civil Justice Reform. This proposed rule meets the applicable standards of Executive Order 12988. List...

76 FR 66887 - Proposed Flood Elevation Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-28

..., identified by Docket No. FEMA-B-1226, to Luis Rodriguez, Chief, Engineering Management Branch, Federal...: Luis Rodriguez, Chief, Engineering Management Branch, Federal Insurance and Mitigation Administration..., Civil Justice Reform. This proposed rule meets the applicable standards of Executive Order 12988. [[Page...

Final Rule for Control of Emissions From New Marine Compression-Ignition Engines at or Above 2.5 Liters Per Cylinder

EPA Pesticide Factsheets

The near-term, Tier 1 standards in this rule are equivalent to the internationally negotiated emission limits for oxides of nitrogen (NOx). These standards will go into effect in 2004 and are based on readily available emission-control technology.

14 CFR 91.1053 - Crewmember experience.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES Fractional Ownership... and ratings: (1) Total flight time for all pilots: (i) Pilot in command—A minimum of 1,500 hours. (ii) Second in command—A minimum of 500 hours. (2) For multi-engine turbine-powered fixed-wing and powered...

77 FR 2497 - Great Lakes Steamship Repower Incentive Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-18

... allow the use of residual fuel in the replacement diesel engines that exceeds the global and ECA sulfur... changes, see the direct final rule EPA has published in the ``Rules and Regulations'' section of today's... substantial number of small entities. Small entities include small businesses, small organizations, and small...

Final Rule for Phase 1 Greenhouse Gas Emissions Standards and Fuel Efficiency Standards for Medium- and Heavy-Duty Engines and Vehicles

EPA Pesticide Factsheets

EPA and NHTSA, on behalf of the Department of Transportation, have each finalized rules to establish a comprehensive Heavy-Duty National Program that will reduce greenhouse gas emissions and fuel consumption for heavy-duty highway vehicles.

Proposed Rule and Related Materials for Greenhouse Gas Emissions Standards and Fuel Efficiency Standards for Medium- and Heavy-Duty Engines and Vehicles

EPA Pesticide Factsheets

EPA and NHTSA, on behalf of the Department of Transportation, each proposed rules to establish a comprehensive Heavy-Duty National Program to reduce greenhouse gas emissions and increase fuel efficiency for onroad heavy-duty vehicles.

Final Rule for Control of Air Pollution From New Motor Vehicles and New Motor Vehicle Engines: State Commitments to National Low Emission Vehicle Program

EPA Pesticide Factsheets

The Environmental Protection Agency (EPA) is issuing a final rule representing the next step in establishing a voluntary nationwide program to make new cars significantly cleaner burning than today’s current cars.

40 CFR 52.1168a - Part D-Disapproval of Rules and Regulations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Department of Environmental Quality Engineering (DEQE) submitted a revision to the Massachusetts State... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Part D-Disapproval of Rules and Regulations. 52.1168a Section 52.1168a Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...

Economic Impacts of the Category 3 Marine Rule on Great Lakes Shipping

EPA Science Inventory

This is a scenario-based economic assessment of the impacts of EPA’s Category 3 Marine Diesel Engines Rule on certain cargo movements in the Great Lakes shipping network. During the proposed phase of the rulemaking, Congress recommended that EPA conduct such a study, and EPA wil...

45 CFR 680.11 - Staff involvement with NSF proposals and awards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... SCIENCE FOUNDATION NATIONAL SCIENCE FOUNDATION RULES OF PRACTICE Rules of Practice for the National Science Foundation § 680.11 Staff involvement with NSF proposals and awards. (a)(1) Many scientists... field of science, engineering, or education, notwithstanding that the focus of the work may change in...

45 CFR 680.11 - Staff involvement with NSF proposals and awards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... SCIENCE FOUNDATION NATIONAL SCIENCE FOUNDATION RULES OF PRACTICE Rules of Practice for the National Science Foundation § 680.11 Staff involvement with NSF proposals and awards. (a)(1) Many scientists... field of science, engineering, or education, notwithstanding that the focus of the work may change in...

45 CFR 680.11 - Staff involvement with NSF proposals and awards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... SCIENCE FOUNDATION NATIONAL SCIENCE FOUNDATION RULES OF PRACTICE Rules of Practice for the National Science Foundation § 680.11 Staff involvement with NSF proposals and awards. (a)(1) Many scientists... field of science, engineering, or education, notwithstanding that the focus of the work may change in...

45 CFR 680.11 - Staff involvement with NSF proposals and awards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... SCIENCE FOUNDATION NATIONAL SCIENCE FOUNDATION RULES OF PRACTICE Rules of Practice for the National Science Foundation § 680.11 Staff involvement with NSF proposals and awards. (a)(1) Many scientists... field of science, engineering, or education, notwithstanding that the focus of the work may change in...

75 FR 34282 - Federal Acquisition Regulation; FAR Case 2009-014, New Designated Country-Taiwan

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-16

... Government Procurement. DATES: Effective Date: June 16, 2010. FOR FURTHER INFORMATION CONTACT: Ms. Lori... Government Procurement. The interim rule added Taiwan to the list of World Trade Organization Government... seq., because, although this rule opens up Government procurement to the goods and services of Taiwan...

33 CFR 161.4 - Requirement to carry the rules.

Code of Federal Regulations, 2010 CFR

2010-07-01

... User's Manual which may be obtained by contacting the appropriate VTS, and periodically published in the Local Notice to Mariners. The VTS User's Manual and the World VTS Guide, an International Maritime....4 Requirement to carry the rules. Each VTS User shall carry on board and maintain for ready...

78 FR 80367 - Federal Acquisition Regulation; Federal Acquisition Circular 2005-72; Introduction

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-31

...-ended, unrestricted indemnification clause. This rule clarified for the public that an End User License... and nonbinding against the Government and Government- authorized end-users. The rule contained a new... application of the World Trade Organization Government Procurement Agreement and the Free Trade Agreements as...

76 FR 54392 - Animal Welfare; Importation of Live Dogs

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-01

... Live Dogs AGENCY: Animal and Plant Health Inspection Service, USDA. ACTION: Proposed rule. SUMMARY: We... of certain live dogs. Consistent with this amendment, this proposed rule would, with certain limited exceptions, prohibit the importation of dogs from any part of the world into the continental United States or...

77 FR 54384 - Nonconformance Penalties for On-Highway Heavy-Duty Diesel Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-05

...EPA is taking final action to establish nonconformance penalties (NCPs) for manufacturers of heavy heavy-duty diesel engines (HHDDE) in model years 2012 and later for emissions of oxides of nitrogen (NOX) because we have found the criteria for NCPs and the Clean Air Act have been met. The NOX standards to which these NCPs apply were established by a rule published on January 18, 2001. In general, NCPs allow a manufacturer of heavy-duty engines (HDEs) whose engines do not conform to applicable emission standards, but do not exceed a designated upper limit, to be issued a certificate of conformity upon payment of a monetary penalty to the United States Government. The upper limit associated with these NCPs is 0.50 grams of NOX per brake horsepower-hour (g/bhp-hr). This Final Rule specifies certain parameters that are entered into the preexisting penalty formulas along with the emissions of the engine and the incorporation of other factors to determine the amount a manufacturer must pay. Key parameters that determine the NCP a manufacturer must pay are EPA's estimated cost of compliance for a near worst-case engine and the degree to which the engine exceeds the emission standard (as measured from production engines). EPA proposed NCPs for medium heavy duty diesel engines. However, EPA is not taking final action with regard to NCPs for these engines at this time because EPA has not completed its review of the data and comments regarding these engines.

Strategies for adding adaptive learning mechanisms to rule-based diagnostic expert systems

NASA Technical Reports Server (NTRS)

Stclair, D. C.; Sabharwal, C. L.; Bond, W. E.; Hacke, Keith

1988-01-01

Rule-based diagnostic expert systems can be used to perform many of the diagnostic chores necessary in today's complex space systems. These expert systems typically take a set of symptoms as input and produce diagnostic advice as output. The primary objective of such expert systems is to provide accurate and comprehensive advice which can be used to help return the space system in question to nominal operation. The development and maintenance of diagnostic expert systems is time and labor intensive since the services of both knowledge engineer(s) and domain expert(s) are required. The use of adaptive learning mechanisms to increment evaluate and refine rules promises to reduce both time and labor costs associated with such systems. This paper describes the basic adaptive learning mechanisms of strengthening, weakening, generalization, discrimination, and discovery. Next basic strategies are discussed for adding these learning mechanisms to rule-based diagnostic expert systems. These strategies support the incremental evaluation and refinement of rules in the knowledge base by comparing the set of advice given by the expert system (A) with the correct diagnosis (C). Techniques are described for selecting those rules in the in the knowledge base which should participate in adaptive learning. The strategies presented may be used with a wide variety of learning algorithms. Further, these strategies are applicable to a large number of rule-based diagnostic expert systems. They may be used to provide either immediate or deferred updating of the knowledge base.

77 FR 51477 - 2012 Technical Corrections, Clarifying and Other Amendments to the Greenhouse Gas Reporting Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-24

... Equation W-7 to allow for reporters to use alternative methods such as engineering estimates based on best... requirement in 40 CFR 98.236 for reporting of ``annual throughput as determined by engineering estimate based...

Final Rule for Amendment to Emission Requirements Applicable to New Gasoline Spark-Ignition Marine Engines

EPA Pesticide Factsheets

This rulemaking amends the regulations applicable to new gasoline spark-ignition marine engines to address an oversight regarding the production line testing program in the final regulations published on October 4, 1996, (61 FR 52087).

The use of natural language processing on pediatric diagnostic radiology reports in the electronic health record to identify deep venous thrombosis in children.

PubMed

Gálvez, Jorge A; Pappas, Janine M; Ahumada, Luis; Martin, John N; Simpao, Allan F; Rehman, Mohamed A; Witmer, Char

2017-10-01

Venous thromboembolism (VTE) is a potentially life-threatening condition that includes both deep vein thrombosis (DVT) and pulmonary embolism. We sought to improve detection and reporting of children with a new diagnosis of VTE by applying natural language processing (NLP) tools to radiologists' reports. We validated an NLP tool, Reveal NLP (Health Fidelity Inc, San Mateo, CA) and inference rules engine's performance in identifying reports with deep venous thrombosis using a curated set of ultrasound reports. We then configured the NLP tool to scan all available radiology reports on a daily basis for studies that met criteria for VTE between July 1, 2015, and March 31, 2016. The NLP tool and inference rules engine correctly identified 140 out of 144 reports with positive DVT findings and 98 out of 106 negative reports in the validation set. The tool's sensitivity was 97.2% (95% CI 93-99.2%), specificity was 92.5% (95% CI 85.7-96.7%). Subsequently, the NLP tool and inference rules engine processed 6373 radiology reports from 3371 hospital encounters. The NLP tool and inference rules engine identified 178 positive reports and 3193 negative reports with a sensitivity of 82.9% (95% CI 74.8-89.2) and specificity of 97.5% (95% CI 96.9-98). The system functions well as a safety net to screen patients for HA-VTE on a daily basis and offers value as an automated, redundant system. To our knowledge, this is the first pediatric study to apply NLP technology in a prospective manner for HA-VTE identification.

Designing an autoverification system in Zagazig University Hospitals Laboratories: preliminary evaluation on thyroid function profile.

PubMed

Sediq, Amany Mohy-Eldin; Abdel-Azeez, Ahmad GabAllahm Hala

2014-01-01

The current practice in Zagazig University Hospitals Laboratories (ZUHL) is manual verification of all results for the later release of reports. These processes are time consuming and tedious, with large inter-individual variation that slows the turnaround time (TAT). Autoverification is the process of comparing patient results, generated from interfaced instruments, against laboratory-defined acceptance parameters. This study describes an autoverification engine designed and implemented in ZUHL, Egypt. A descriptive study conducted at ZUHL, from January 2012-December 2013. A rule-based system was used in designing an autoverification engine. The engine was preliminarily evaluated on a thyroid function panel. A total of 563 rules were written and tested on 563 simulated cases and 1673 archived cases. The engine decisions were compared to that of 4 independent expert reviewers. The impact of engine implementation on TAT was evaluated. Agreement was achieved among the 4 reviewers in 55.5% of cases, and with the engine in 51.5% of cases. The autoverification rate for archived cases was 63.8%. Reported lab TAT was reduced by 34.9%, and TAT segment from the completion of analysis to verification was reduced by 61.8%. The developed rule-based autoverification system has a verification rate comparable to that of the commercially available software. However, the in-house development of this system had saved the hospital the cost of commercially available ones. The implementation of the system shortened the TAT and minimized the number of samples that needed staff revision, which enabled laboratory staff to devote more time and effort to handle problematic test results and to improve patient care quality.

Rule groupings in expert systems using nearest neighbour decision rules, and convex hulls

NASA Technical Reports Server (NTRS)

Anastasiadis, Stergios

1991-01-01

Expert System shells are lacking in many areas of software engineering. Large rule based systems are not semantically comprehensible, difficult to debug, and impossible to modify or validate. Partitioning a set of rules found in CLIPS (C Language Integrated Production System) into groups of rules which reflect the underlying semantic subdomains of the problem, will address adequately the concerns stated above. Techniques are introduced to structure a CLIPS rule base into groups of rules that inherently have common semantic information. The concepts involved are imported from the field of A.I., Pattern Recognition, and Statistical Inference. Techniques focus on the areas of feature selection, classification, and a criteria of how 'good' the classification technique is, based on Bayesian Decision Theory. A variety of distance metrics are discussed for measuring the 'closeness' of CLIPS rules and various Nearest Neighbor classification algorithms are described based on the above metric.

Equations for Scoring Rules When Data Are Missing

NASA Technical Reports Server (NTRS)

James, Mark

2006-01-01

A document presents equations for scoring rules in a diagnostic and/or prognostic artificial-intelligence software system of the rule-based inference-engine type. The equations define a set of metrics that characterize the evaluation of a rule when data required for the antecedence clause(s) of the rule are missing. The metrics include a primary measure denoted the rule completeness metric (RCM) plus a number of subsidiary measures that contribute to the RCM. The RCM is derived from an analysis of a rule with respect to its truth and a measure of the completeness of its input data. The derivation is such that the truth value of an antecedent is independent of the measure of its completeness. The RCM can be used to compare the degree of completeness of two or more rules with respect to a given set of data. Hence, the RCM can be used as a guide to choosing among rules during the rule-selection phase of operation of the artificial-intelligence system..

Convolving engineering and medical pedagogies for training of tomorrow's health care professionals.

PubMed

Lee, Raphael C

2013-03-01

Several fundamental benefits justify why biomedical engineering and medicine should form a more convergent alliance, especially for the training of tomorrow's physicians and biomedical engineers. Herein, we review the rationale underlying the benefits. Biological discovery has advanced beyond the era of molecular biology well into today's era of molecular systems biology, which focuses on understanding the rules that govern the behavior of complex living systems. This has important medical implications. To realize cost-effective personalized medicine, it is necessary to translate the advances in molecular systems biology to higher levels of biological organization (organ, system, and organismal levels) and then to develop new medical therapeutics based on simulation and medical informatics analysis. Higher education in biological and medical sciences must adapt to a new set of training objectives. This will involve a shifting away from reductionist problem solving toward more integrative, continuum, and predictive modeling approaches which traditionally have been more associated with engineering science. Future biomedical engineers and MDs must be able to predict clinical response to therapeutic intervention. Medical education will involve engineering pedagogies, wherein basic governing rules of complex system behavior and skill sets in manipulating these systems to achieve a practical desired outcome are taught. Similarly, graduate biomedical engineering programs will include more practical exposure to clinical problem solving.

Forward-Chaining Versus A Graph Approach As The Inference Engine In Expert Systems

NASA Astrophysics Data System (ADS)

Neapolitan, Richard E.

1986-03-01

Rule-based expert systems are those in which a certain number of IF-THEN rules are assumed to be true. Based on the verity of some assertions, the rules deduce as many new conclusions as possible. A standard technique used to make these deductions is forward-chaining. In forward-chaining, the program or 'inference engine' cycles through the rules. At each rule, the premises for the rule are checked against the current true assertions. If all the premises are found, the conclusion is added to the list of true assertions. At that point it is necessary to start over at the first rule, since the new conclusion may be a premise in a rule already checked. Therefore, each time a new conclusion is deduced it is necessary to start the rule checking procedure over. This process continues until no new conclusions are added and the end of the list of rules is reached. The above process, although quite costly in terms of CPU cycles due to the necessity of repeatedly starting the process over, is necessary if the rules contain 'pattern variables'. An example of such a rule is, 'IF X IS A BACTERIA, THEN X CAN BE TREATED WITH ANTIBIOTICS'. Since the rule can lead to conclusions for many values of X, it is necessary to check each premise in the rule against every true assertion producing an association list to be used in the checking of the next premise. However, if the rule does not contain variable data, as is the case in many current expert systems, then a rule can lead to only one conclusion. In this case, the rules can be stored in a graph, and the true assertions in an assertion list. The assertion list is traversed only once; at each assertion a premise is triggered in all the rules which have that assertion as a premise. When all premises for a rule trigger, the rule's conclusion is added to the END of the list of assertions. It must be added at the end so that it will eventually be used to make further deductions. In the current paper, the two methods are described in detail, the relative advantages of each is discussed, and a benchmark comparing the CPU cycles consumed by each is included. It is also shown that, in the case of reasoning under uncertainty, it is possible to properly combine the certainties derived from rules arguing for the same conclusion when the graph approach is used.

From Human Activity to Conceptual Understanding of the Chain Rule

ERIC Educational Resources Information Center

Jojo, Zingiswa Mybert Monica; Maharaj, Aneshkumar; Brijlall, Deonarain

2013-01-01

This article reports on a study which investigated first year university engineering students' construction of the definition of the concept of the chain rule in differential calculus at a University of Technology in South Africa. An APOS (Action-Process-Objects-Schema) approach was used to explore conceptual understanding displayed by students in…

17 CFR 250.80 - Definitions of terms used in rules under section 13.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Definitions of terms used in..., Sales and Construction Contracts § 250.80 Definitions of terms used in rules under section 13. As used... context otherwise requires: (a) Service means any managerial, financial, legal, engineering, purchasing...

Higher Education: New Models, New Rules

ERIC Educational Resources Information Center

Soares, Louis; Eaton, Judith S.; Smith, Burck

2013-01-01

The Internet enables new models. In the commercial world, for example, we have eBay, Amazon.com, and Netflix. These new models operate with a different set of rules than do traditional models. New models are emerging in higher education as well--for example, competency-based programs. In addition, courses that are being provided from outside the…

Context-Awareness Based Personalized Recommendation of Anti-Hypertension Drugs.

PubMed

Chen, Dexin; Jin, Dawei; Goh, Tiong-Thye; Li, Na; Wei, Leiru

2016-09-01

The World Health Organization estimates that almost one-third of the world's adult population are suffering from hypertension which has gradually become a "silent killer". Due to the varieties of anti-hypertensive drugs, patients are interested in how these drugs can be selected to match their respective conditions. This study provides a personalized recommendation service system of anti-hypertensive drugs based on context-awareness and designs a context ontology framework of the service. In addition, this paper introduces a Semantic Web Rule Language (SWRL)-based rule to provide high-level context reasoning and information recommendation and to overcome the limitation of ontology reasoning. To make the information recommendation of the drugs more personalized, this study also devises three categories of information recommendation rules that match different priority levels and uses a ranking algorithm to optimize the recommendation. The experiment conducted shows that combining the anti-hypertensive drugs personalized recommendation service context ontology (HyRCO) with the optimized rule reasoning can achieve a higher-quality personalized drug recommendation service. Accordingly this exploratory study of the personalized recommendation service for hypertensive drugs and its method can be easily adopted for other diseases.

Project Alexander the Great: a study on the world proliferation of bioengineering/biomedical engineering education.

PubMed

Abu-Faraj, Ziad O

2008-01-01

Bioengineering/Biomedical Engineering is considered amongst the most reputable fields within the global arena, and will likely be the primer for any future breakthroughs in Medicine and Biology. Bioengineering/biomedical engineering education has evolved since late 1950s and is undergoing advancement in leading academic institutions worldwide. This paper delineates an original study on the world proliferation of bioengineering/biomedical engineering education and bears the name 'Project Alexander the Great'. The initial step of the project was to survey all 10448 universities, recognized by the International Association of Universities, spread among the 193 member states of the United Nations within the six continents. The project aims at identifying, disseminating, and networking, through the world-wide-web, those institutions of higher learning that provide bioengineering/biomedical engineering education. The significance of this project is multifold: i) the inception of a web-based 'world-map' in bioengineering/biomedical engineering education for the potential international student desiring to pursue a career in this field; ii) the global networking of bioengineering/biomedical engineering academic/research programs; iii) the promotion of first-class bioengineering/biomedical engineering education and the catalysis of global proliferation of this field; iv) the erection of bridges among educational institutions, industry, and professional societies or organizations involved in Bioengineering/Biomedical Engineering; and v) the catalysis in the establishment of framework agreements for cooperation among the identified institutions offering curricula in this field. This paper presents the results obtained from Africa and North America. The whole project is due to be completed by 2009.

Program for Experimentation With Expert Systems

NASA Technical Reports Server (NTRS)

Engle, S. W.

1986-01-01

CERBERUS is forward-chaining, knowledge-based system program useful for experimentation with expert systems. Inference-engine mechanism performs deductions according to user-supplied rule set. Information stored in intermediate area, and user interrogated only when no applicable data found in storage. Each assertion posed by CERBERUS answered with certainty ranging from 0 to 100 percent. Rule processor stops investigating applicable rules when goal reaches certainty of 95 percent or higher. Capable of operating for wide variety of domains. Sample rule files included for animal identification, pixel classification in image processing, and rudimentary car repair for novice mechanic. User supplies set of end goals or actions. System complexity decided by user's rule file. CERBERUS written in FORTRAN 77.

SIRE: A Simple Interactive Rule Editor for NICBES

NASA Technical Reports Server (NTRS)

Bykat, Alex

1988-01-01

To support evolution of domain expertise, and its representation in an expert system knowledge base, a user-friendly rule base editor is mandatory. The Nickel Cadmium Battery Expert System (NICBES), a prototype of an expert system for the Hubble Space Telescope power storage management system, does not provide such an editor. In the following, a description of a Simple Interactive Rule Base Editor (SIRE) for NICBES is described. The SIRE provides a consistent internal representation of the NICBES knowledge base. It supports knowledge presentation and provides a user-friendly and code language independent medium for rule addition and modification. The SIRE is integrated with NICBES via an interface module. This module provides translation of the internal representation to Prolog-type rules (Horn clauses), latter rule assertion, and a simple mechanism for rule selection for its Prolog inference engine.

40 CFR 52.1870 - Identification of plan.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Chemical Corporation in Allen County, Crystal Tissue Company in Butler County, U.S. Steel Corporation.... (81) On March 3, 1986, the Ohio Environmental Protection Agency (OEPA) submitted Good Engineering... Engineering Practice Stack Height Regulations”. These rules were adopted by the State on February 12, 1986 and...

76 FR 10558 - Notice of Scope Rulings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-25

... People's Republic of China. Requestor: Blackstone OTR LLC and OTR Wheel Engineering, Inc.; whether...-601: Tapered Roller Bearings from the People's Republic of China. Requestor: New Trend Engineering... antidumping duty order; requested February 17, 2010; initiated April 16, 2010. A-570-894: Certain Tissue Paper...

36 CFR 327.9 - Sanitation.

Code of Federal Regulations, 2010 CFR

2010-07-01

....9 Parks, Forests, and Public Property CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY RULES AND REGULATIONS GOVERNING PUBLIC USE OF WATER RESOURCE DEVELOPMENT PROJECTS ADMINISTERED BY THE CHIEF OF ENGINEERS..., industrial and commercial products and by-products, on project lands or into project waters is prohibited. (d...

36 CFR 328.3 - References.

Code of Federal Regulations, 2010 CFR

2010-07-01

....3 Parks, Forests, and Public Property CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY REGULATION OF SEAPLANE OPERATIONS AT CIVIL WORKS WATER RESOURCE DEVELOPMENT PROJECTS ADMINISTERED BY THE CHIEF OF ENGINEERS § 328.3 References. (a) Title 36 CFR, part 327, Rules and Regulations Governing Public Use of...

78 FR 15597 - Special Conditions: GE Aviation CT7-2E1 Turboshaft Engine Model

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-12

..., Aircraft Certification Service, 12 New England Executive Park, Burlington, Massachusetts 01803-5299... concerning this rule, contact Vincent Bennett, ANE-7, Engine and Propeller Directorate, Aircraft... the rating's definition, overspeed, controls system, and endurance test, because the applicable...

Final Rule for Nonconformance Penalties for On-Highway Heavy-Duty Diesel Engines

EPA Pesticide Factsheets

EPA is taking final action to establish nonconformance penalties (NCPs) for manufacturers of heavy heavy-duty diesel engines (HHDDE) in model years 2012 and later for emissions of oxides of nitrogen (NOX) because we have found the criteria for NCPs.

U.S. Corps of Engineers (COE) Letters to California, Texas and Illinois Regarding Munitions on Closed Military Ranges

EPA Pesticide Factsheets

This memorandum responds to three letters sent by the U.S. Army Corps of Engineers (COE) representatives to the States of Texas, California, and Illinois involving interpretations of the Military Munitions Rule and state authority.

Final Rule for Control of Air Pollution from Aircraft and Aircraft Engines: Emission Standards and Test Procedures

EPA Pesticide Factsheets

EPA is amending the existing emission standards for oxides of nitrogen (NOx) for new commercial aircraft engines. These standards are equivalent to the NOx emission standards of the United Nations International Civil Aviation Organization (ICAO).

The composite load spectra project

NASA Technical Reports Server (NTRS)

Newell, J. F.; Ho, H.; Kurth, R. E.

1990-01-01

Probabilistic methods and generic load models capable of simulating the load spectra that are induced in space propulsion system components are being developed. Four engine component types (the transfer ducts, the turbine blades, the liquid oxygen posts and the turbopump oxidizer discharge duct) were selected as representative hardware examples. The composite load spectra that simulate the probabilistic loads for these components are typically used as the input loads for a probabilistic structural analysis. The knowledge-based system approach used for the composite load spectra project provides an ideal environment for incremental development. The intelligent database paradigm employed in developing the expert system provides a smooth coupling between the numerical processing and the symbolic (information) processing. Large volumes of engine load information and engineering data are stored in database format and managed by a database management system. Numerical procedures for probabilistic load simulation and database management functions are controlled by rule modules. Rules were hard-wired as decision trees into rule modules to perform process control tasks. There are modules to retrieve load information and models. There are modules to select loads and models to carry out quick load calculations or make an input file for full duty-cycle time dependent load simulation. The composite load spectra load expert system implemented today is capable of performing intelligent rocket engine load spectra simulation. Further development of the expert system will provide tutorial capability for users to learn from it.

Potential predictability and forecast skill in ensemble climate forecast: a skill-persistence rule

NASA Astrophysics Data System (ADS)

Jin, Yishuai; Rong, Xinyao; Liu, Zhengyu

2017-12-01

This study investigates the factors relationship between the forecast skills for the real world (actual skill) and perfect model (perfect skill) in ensemble climate model forecast with a series of fully coupled general circulation model forecast experiments. It is found that the actual skill for sea surface temperature (SST) in seasonal forecast is substantially higher than the perfect skill on a large part of the tropical oceans, especially the tropical Indian Ocean and the central-eastern Pacific Ocean. The higher actual skill is found to be related to the higher observational SST persistence, suggesting a skill-persistence rule: a higher SST persistence in the real world than in the model could overwhelm the model bias to produce a higher forecast skill for the real world than for the perfect model. The relation between forecast skill and persistence is further proved using a first-order autoregressive model (AR1) analytically for theoretical solutions and numerically for analogue experiments. The AR1 model study shows that the skill-persistence rule is strictly valid in the case of infinite ensemble size, but could be distorted by sampling errors and non-AR1 processes. This study suggests that the so called "perfect skill" is model dependent and cannot serve as an accurate estimate of the true upper limit of real world prediction skill, unless the model can capture at least the persistence property of the observation.

The Development of the World Anti-Doping Code.

PubMed

Young, Richard

2017-01-01

This chapter addresses both the development and substance of the World Anti-Doping Code, which came into effect in 2003, as well as the subsequent Code amendments, which came into effect in 2009 and 2015. Through an extensive process of stakeholder input and collaboration, the World Anti-Doping Code has transformed the hodgepodge of inconsistent and competing pre-2003 anti-doping rules into a harmonized and effective approach to anti-doping. The Code, as amended, is now widely recognized worldwide as the gold standard in anti-doping. The World Anti-Doping Code originally went into effect on January 1, 2004. The first amendments to the Code went into effect on January 1, 2009, and the second amendments on January 1, 2015. The Code and the related international standards are the product of a long and collaborative process designed to make the fight against doping more effective through the adoption and implementation of worldwide harmonized rules and best practices. © 2017 S. Karger AG, Basel.

Effective domain-dependent reuse in medical knowledge bases.

PubMed

Dojat, M; Pachet, F

1995-12-01

Knowledge reuse is now a critical issue for most developers of medical knowledge-based systems. As a rule, reuse is addressed from an ambitious, knowledge-engineering perspective that focuses on reusable general purpose knowledge modules, concepts, and methods. However, such a general goal fails to take into account the specific aspects of medical practice. From the point of view of the knowledge engineer, whose goal is to capture the specific features and intricacies of a given domain, this approach addresses the wrong level of generality. In this paper, we adopt a more pragmatic viewpoint, introducing the less ambitious goal of "domain-dependent limited reuse" and suggesting effective means of achieving it in practice. In a knowledge representation framework combining objects and production rules, we propose three mechanisms emerging from the combination of object-oriented programming and rule-based programming. We show these mechanisms contribute to achieve limited reuse and to introduce useful limited variations in medical expertise.

Propulsion and Power Supplies for Unmanned Vehicles. Volume I. Engines for Small Propeller-Driven RPVS

DTIC Science & Technology

1977-11-01

residual unbaiance. Mass production experience and availability of rotary piston engines -type WANKEL- refer basically to the automobile industry...production air cooled automobile engine in standard form can be ruled out on a specific weight basis. 4. In modified form, as used in many light aircr: Ct...the air cooled automobile engine appears to be a possibility. Availability, lcw initial cost; and good specific fuel consumption could make the unit

EXADS - EXPERT SYSTEM FOR AUTOMATED DESIGN SYNTHESIS

NASA Technical Reports Server (NTRS)

Rogers, J. L.

1994-01-01

The expert system called EXADS was developed to aid users of the Automated Design Synthesis (ADS) general purpose optimization program. Because of the general purpose nature of ADS, it is difficult for a nonexpert to select the best choice of strategy, optimizer, and one-dimensional search options from the one hundred or so combinations that are available. EXADS aids engineers in determining the best combination based on their knowledge of the problem and the expert knowledge previously stored by experts who developed ADS. EXADS is a customized application of the AESOP artificial intelligence program (the general version of AESOP is available separately from COSMIC. The ADS program is also available from COSMIC.) The expert system consists of two main components. The knowledge base contains about 200 rules and is divided into three categories: constrained, unconstrained, and constrained treated as unconstrained. The EXADS inference engine is rule-based and makes decisions about a particular situation using hypotheses (potential solutions), rules, and answers to questions drawn from the rule base. EXADS is backward-chaining, that is, it works from hypothesis to facts. The rule base was compiled from sources such as literature searches, ADS documentation, and engineer surveys. EXADS will accept answers such as yes, no, maybe, likely, and don't know, or a certainty factor ranging from 0 to 10. When any hypothesis reaches a confidence level of 90% or more, it is deemed as the best choice and displayed to the user. If no hypothesis is confirmed, the user can examine explanations of why the hypotheses failed to reach the 90% level. The IBM PC version of EXADS is written in IQ-LISP for execution under DOS 2.0 or higher with a central memory requirement of approximately 512K of 8 bit bytes. This program was developed in 1986.

Potential predictability and forecast skill in ensemble climate forecast: the skill-persistence rule

NASA Astrophysics Data System (ADS)

Jin, Y.; Rong, X.; Liu, Z.

2017-12-01

This study investigates the factors that impact the forecast skill for the real world (actual skill) and perfect model (perfect skill) in ensemble climate model forecast with a series of fully coupled general circulation model forecast experiments. It is found that the actual skill of sea surface temperature (SST) in seasonal forecast is substantially higher than the perfect skill on a large part of the tropical oceans, especially the tropical Indian Ocean and the central-eastern Pacific Ocean. The higher actual skill is found to be related to the higher observational SST persistence, suggesting a skill-persistence rule: a higher SST persistence in the real world than in the model could overwhelm the model bias to produce a higher forecast skill for the real world than for the perfect model. The relation between forecast skill and persistence is further examined using a first-order autoregressive model (AR1) analytically for theoretical solutions and numerically for analogue experiments. The AR1 model study shows that the skill-persistence rule is strictly valid in the case of infinite ensemble size, but can be distorted by the sampling error and non-AR1 processes.

Training the rivers and exploring the coasts. Knowledge evolution in the Netherlands in two engineering fields between 1800 and 1940

NASA Astrophysics Data System (ADS)

Toussaint, Bert

In this paper, the author wants to explore the knowledge development in two crucial fields, river management and coast management in the 19th century and first decades of the 20th century. Were there similar characteristics in this development? Which types of knowledge can be distinguished? Who were the principal actors in these processes? Did the knowledge evolution have a Dutch stamp or a rather international flavour? To structure the analysis, the author uses the concept of technology regime, a set of technical rules which shapes the know-how of engineers, their design rules and research processes. The analysis shows that the knowledge development of river management and coastal management followed different evolution paths between 1800 and 1940. In the field of river management, a substantial amount of mathematical and physical theories had been gradually developed since the end of the 17th century. After 1850, the regularization approach met gradually a widespread support. Empirical data, design rules, theoretical knowledge and engineering pivoted around the regularization approach, and a technology regime around this approach emerged. The regularization regime further developed in the 20th century, and handbooks were increasingly shaped by mathematical and physical reasoning and formulas. On the other hand, coastal management was until the 1880s a rather marginal activity. Coastal engineering was an extremely complex and multidimensional field of knowledge which no engineer was able to grasp. The foundation of a Dutch weather institute was a first important step towards a more theoretical approach. The Zuiderzee works (starting in 1925) gave probably the most important stimuli to scientific coastal research. It was also a main factor in setting up scientific institutes by Rijkswaterstaat. So from the 1920s, Rijkswaterstaat became a major producer of scientific knowledge, not only in tidal modelling but also in coastal research. Due to a multidisciplinary knowledge network, coastal research transformed from a marginal to a first-rank scientific field, and this transformation enabled Rijkswaterstaat to set a much higher level of ambition in coastal management. The 1953 flood and the Deltaworks marked a new era. New design rules for sea dykes and river levees, based on a revolutionary statistical risk approach were determined, and design rules for the Deltaworks estuary closures were developed, being enabled by the development of hydraulic research.

Real-world operation conditions and on-road emissions of Beijing diesel buses measured by using portable emission measurement system and electric low-pressure impactor.

PubMed

Liu, Zhihua; Ge, Yunshan; Johnson, Kent C; Shah, Asad Naeem; Tan, Jianwei; Wang, Chu; Yu, Linxiao

2011-03-15

On-road measurement is an effective method to investigate real-world emissions generated from vehicles and estimate the difference between engine certification cycles and real-world operating conditions. This study presents the results of on-road measurements collected from urban buses which propelled by diesel engine in Beijing city. Two widely used Euro III emission level buses and two Euro IV emission level buses were chosen to perform on-road emission measurements using portable emission measurement system (PEMS) for gaseous pollutant and Electric Low Pressure Impactor (ELPI) for particulate matter (PM) number emissions. The results indicate that considerable discrepancies of engine operating conditions between real-world driving cycles and engine certification cycles have been observed. Under real-world operating conditions, carbon monoxide (CO) and hydrocarbon (HC) emissions can easily meet their respective regulations limits, while brake specification nitrogen oxide (bsNO(x)) emissions present a significant deviation from its corresponding limit. Compared with standard limits, the real-world bsNO(x) emission of the two Euro III emission level buses approximately increased by 60% and 120% respectively, and bsNO(x) of two Euro IV buses nearly twice standard limits because Selective Catalytic Reduction (SCR) system not active under low exhaust temperature. Particle mass were estimated via particle size distribution with the assumption that particle density and diameter is liner. The results demonstrate that nanometer size particulate matter make significant contribution to total particle number but play a minor role to total particle mass. It is suggested that specific certified cycle should be developed to regulate bus engines emissions on the test bench or use PEMS to control the bus emissions under real-world operating conditions. Copyright © 2010 Elsevier B.V. All rights reserved.

Teach students Semiconductor Lasers according to their natural ability

NASA Astrophysics Data System (ADS)

Liu, Ken; Guo, Chu Cai; Zhang, Jian Fa

2017-08-01

Physics explain the world in strict rules. And with these rules, modern machines and electronic devices with exact operation manner have been developed. However, human beings exceed these machines with self-awareness. To treat these self-awareness students as machines to learn strict rules, or to teach these students according to their aptitude? We choose the latter, because the first kind of teaching would let students lose their individual thoughts and natural ability. In this paper we describe the individualized teaching of "semiconductor lasers".

Real World Cognitive Multi-Tasking and Problem Solving: A Large Scale Cognitive Architecture Simulation Through High Performance Computing-Project Casie

DTIC Science & Technology

2008-03-01

computational version of the CASIE architecture serves to demonstrate the functionality of our primary theories. However, implementation of several other...following facts. First, based on Theorem 3 and Theorem 5, the objective function is non -increasing under updating rule (6); second, by the criteria for...reassignment in updating rule (7), it is trivial to show that the objective function is non -increasing under updating rule (7). A Unified View to Graph

75 FR 79339 - Notice of Scope Rulings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-20

... Engineering, Inc.; whether its wheel hub assemblies are within the scope of the antidumping duty order...: New Trend Engineering Ltd.; whether certain of its wheel hub assemblies are within the scope of the...: Certain Tissue Paper Products From the People's Republic of China Requestor: Seaman Paper Company of...

77 FR 9893 - Notice of Scope Rulings

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-21

... Engineering Limited; its wheel hub units are within the scope of the antidumping duty order; April 18, 2011. A... of China. Requestor: OTR Wheel Engineering, Inc.; its Trac Master and Traction Master tires are... Tissue Paper Products from the People's Republic of China. Requestor: Seaman Paper Company of...

75 FR 52311 - Notice of Scope Rulings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-25

... Republic of China. Requestor: New Trend Engineering Ltd.; whether its certain wheel hub assemblies are... Bearings from the People's Republic of China. Requestor: Blackstone OTR LLC and OTR Wheel Engineering, Inc... duty order; requested February 17, 2010. A-570-894: Certain Tissue Paper Products from the People's...

14 CFR 135.367 - Large transport category airplanes: Reciprocating engine powered: Takeoff limitations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Large transport category airplanes... AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Airplane Performance Operating Limitations § 135.367 Large transport category airplanes: Reciprocating engine powered: Takeoff limitations. (a) No...

14 CFR 135.367 - Large transport category airplanes: Reciprocating engine powered: Takeoff limitations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Large transport category airplanes... AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Airplane Performance Operating Limitations § 135.367 Large transport category airplanes: Reciprocating engine powered: Takeoff limitations. (a) No...

14 CFR 135.367 - Large transport category airplanes: Reciprocating engine powered: Takeoff limitations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Large transport category airplanes... AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Airplane Performance Operating Limitations § 135.367 Large transport category airplanes: Reciprocating engine powered: Takeoff limitations. (a) No...

14 CFR 135.367 - Large transport category airplanes: Reciprocating engine powered: Takeoff limitations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Large transport category airplanes... AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Airplane Performance Operating Limitations § 135.367 Large transport category airplanes: Reciprocating engine powered: Takeoff limitations. (a) No...

14 CFR 135.367 - Large transport category airplanes: Reciprocating engine powered: Takeoff limitations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Large transport category airplanes... AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Airplane Performance Operating Limitations § 135.367 Large transport category airplanes: Reciprocating engine powered: Takeoff limitations. (a) No...

Genie Inference Engine Rule Writer’s Guide.

DTIC Science & Technology

1987-08-01

33 APPENDIX D. Animal Bootstrap File.............................................................. 39...APPENDIX E. Sample Run of Animal Identification Expert System.......................... 43 APPENDIX F. Numeric Test Knowledge Base...and other data s.tructures stored in the knowledge base (KB), queries the user for input, and draws conclusions. Genie (GENeric Inference Engine) is

78 FR 17073 - Airworthiness Directives; Bombardier, Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-20

... of Transportation (DOT). ACTION: Final rule. SUMMARY: We are adopting a new airworthiness directive..., and CL-604 Variants) airplanes. This AD was prompted by reports of jamming/malfunctioning of the left-hand engine thrust control mechanism. This AD requires modifying the left-hand engine upper core-cowl...

Photolithography diagnostic expert systems: a systematic approach to problem solving in a wafer fabrication facility

NASA Astrophysics Data System (ADS)

Weatherwax Scott, Caroline; Tsareff, Christopher R.

1990-06-01

One of the main goals of process engineering in the semiconductor industry is to improve wafer fabrication productivity and throughput. Engineers must work continuously toward this goal in addition to performing sustaining and development tasks. To accomplish these objectives, managers must make efficient use of engineering resources. One of the tools being used to improve efficiency is the diagnostic expert system. Expert systems are knowledge based computer programs designed to lead the user through the analysis and solution of a problem. Several photolithography diagnostic expert systems have been implemented at the Hughes Technology Center to provide a systematic approach to process problem solving. This systematic approach was achieved by documenting cause and effect analyses for a wide variety of processing problems. This knowledge was organized in the form of IF-THEN rules, a common structure for knowledge representation in expert system technology. These rules form the knowledge base of the expert system which is stored in the computer. The systems also include the problem solving methodology used by the expert when addressing a problem in his area of expertise. Operators now use the expert systems to solve many process problems without engineering assistance. The systems also facilitate the collection of appropriate data to assist engineering in solving unanticipated problems. Currently, several expert systems have been implemented to cover all aspects of the photolithography process. The systems, which have been in use for over a year, include wafer surface preparation (HMDS), photoresist coat and softbake, align and expose on a wafer stepper, and develop inspection. These systems are part of a plan to implement an expert system diagnostic environment throughout the wafer fabrication facility. In this paper, the systems' construction is described, including knowledge acquisition, rule construction, knowledge refinement, testing, and evaluation. The roles played by the process engineering expert and the knowledge engineer are discussed. The features of the systems are shown, particularly the interactive quality of the consultations and the ease of system use.

Representing the healthcare organization in a post-Sarbanes-Oxley world: new rules, new paradigms, new perils.

PubMed

Horton, William W

2004-01-01

The Sarbanes-Oxley Act (Act) significantly changed the expected corporate behavior of public companies. The Act governs the relationship between corporate organizations and their in-house or outside counsel. Under Section 307 of the Act, the Securities and Exchange Commission initially proposed expansive rules regarding counsel's duties. After comments and criticism from much of the bar, a final, narrower, version of rules under Section 307 (Final Rule) was adopted. The Final Rule contains alternative reporting procedures, attorney responsibilities, and sanctions for violations. In addition to the Act, the American Bar Association's (ABA) Task Force on Corporate Responsibility(Task Force), which was itself a reaction to Enron, reported on the importance of counsel's role in a corporate setting (Cheek Report). The ABA adopted amendments to its Model Rules of Professional Conduct (Model Rules) 1.6 and 1.13 as proposed in the Cheek Report. The Final Rule and amended Model Rules together suggest that attorneys may owe duties beyond those owed to their clients.

Application of physics engines in virtual worlds

NASA Astrophysics Data System (ADS)

Norman, Mark; Taylor, Tim

2002-03-01

Dynamic virtual worlds potentially can provide a much richer and more enjoyable experience than static ones. To realize such worlds, three approaches are commonly used. The first of these, and still widely applied, involves importing traditional animations from a modeling system such as 3D Studio Max. This approach is therefore limited to predefined animation scripts or combinations/blends thereof. The second approach involves the integration of some specific-purpose simulation code, such as car dynamics, and is thus generally limited to one (class of) application(s). The third approach involves the use of general-purpose physics engines, which promise to enable a range of compelling dynamic virtual worlds and to considerably speed up development. By far the largest market today for real-time simulation is computer games, revenues exceeding those of the movie industry. Traditionally, the simulation is produced by game developers in-house for specific titles. However, off-the-shelf middleware physics engines are now available for use in games and related domains. In this paper, we report on our experiences of using middleware physics engines to create a virtual world as an interactive experience, and an advanced scenario where artificial life techniques generate controllers for physically modeled characters.

Effects of globalisation on higher engineering education in Germany - current and future demands

NASA Astrophysics Data System (ADS)

Morace, Christophe; May, Dominik; Terkowsky, Claudius; Reynet, Olivier

2017-03-01

Germany is well known around the world for the strength of its economy, its industry and for the 'German model' for higher engineering education based on developing technological skills at a very high level. In this article, we firstly describe the former and present model of engineering education in Germany in a context of the globalisation of the world economy and of higher education, in order to understand how it covers the current demand for engineering resources. Secondly, we analyse the impact of globalisation from a technological perspective. To this end, we describe initiatives for innovation driven by the German federal government and engineering societies, and summarise the first impacts on engineering education and on social competence for engineers. Thirdly, we explore to what extent engineering education in Germany trains engineers in social and intercultural competency to comply with the future demands of the challenge of globalisation.

49 CFR 240.119 - Criteria for consideration of data on substance abuse disorders and alcohol/drug rules compliance.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Process § 240.119 Criteria for consideration of data on substance abuse disorders and alcohol/drug rules.... (b) Fitness requirement. (1) A person who has an active substance abuse disorder shall not be... certified engineer who is determined to have an active substance abuse disorder shall be suspended from...

49 CFR 240.119 - Criteria for consideration of data on substance abuse disorders and alcohol/drug rules compliance.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Process § 240.119 Criteria for consideration of data on substance abuse disorders and alcohol/drug rules.... (b) Fitness requirement. (1) A person who has an active substance abuse disorder shall not be... certified engineer who is determined to have an active substance abuse disorder shall be suspended from...

49 CFR 240.119 - Criteria for consideration of data on substance abuse disorders and alcohol/drug rules compliance.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Process § 240.119 Criteria for consideration of data on substance abuse disorders and alcohol/drug rules.... (b) Fitness requirement. (1) A person who has an active substance abuse disorder shall not be... certified engineer who is determined to have an active substance abuse disorder shall be suspended from...

49 CFR 240.119 - Criteria for consideration of data on substance abuse disorders and alcohol/drug rules compliance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Process § 240.119 Criteria for consideration of data on substance abuse disorders and alcohol/drug rules.... (b) Fitness requirement. (1) A person who has an active substance abuse disorder shall not be... certified engineer who is determined to have an active substance abuse disorder shall be suspended from...

49 CFR 240.119 - Criteria for consideration of data on substance abuse disorders and alcohol/drug rules compliance.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Process § 240.119 Criteria for consideration of data on substance abuse disorders and alcohol/drug rules.... (b) Fitness requirement. (1) A person who has an active substance abuse disorder shall not be... certified engineer who is determined to have an active substance abuse disorder shall be suspended from...

76 FR 21633 - Disestablishing Special Anchorage Area 2; Ashley River, Charleston, SC

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-18

...-30), U.S. Department of Transportation, West Building Ground Floor, Room W12-140, 1200 New Jersey... or shapes required by Rule 30 of the Inland Navigation Rules (33 U.S.C. 2030). Ashley River Properties and the Ripley Light Yacht Club submitted a permit application to the Army Corps of Engineers to...

A computational model of the human visual cortex

NASA Astrophysics Data System (ADS)

Albus, James S.

2008-04-01

The brain is first and foremost a control system that is capable of building an internal representation of the external world, and using this representation to make decisions, set goals and priorities, formulate plans, and control behavior with intent to achieve its goals. The computational model proposed here assumes that this internal representation resides in arrays of cortical columns. More specifically, it models each cortical hypercolumn together with its underlying thalamic nuclei as a Fundamental Computational Unit (FCU) consisting of a frame-like data structure (containing attributes and pointers) plus the computational processes and mechanisms required to maintain it. In sensory-processing areas of the brain, FCUs enable segmentation, grouping, and classification. Pointers stored in FCU frames link pixels and signals to objects and events in situations and episodes that are overlaid with meaning and emotional values. In behavior-generating areas of the brain, FCUs make decisions, set goals and priorities, generate plans, and control behavior. Pointers are used to define rules, grammars, procedures, plans, and behaviors. It is suggested that it may be possible to reverse engineer the human brain at the FCU level of fidelity using nextgeneration massively parallel computer hardware and software. Key Words: computational modeling, human cortex, brain modeling, reverse engineering the brain, image processing, perception, segmentation, knowledge representation

75 FR 15757 - Self-Regulatory Organizations; NASDAQ OMX PHLX, Inc.; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-30

... Rule Change Relating to U.S. Dollar-Settled Foreign Currency Options March 23, 2010. Pursuant to... Krone (``XDV'') to the U.S. Dollar-Settled Foreign Currency Options fees.\\3\\ While changes to the Fee... World Currency Options[supreg] (``WCOs''). The text of the proposed rule change is available on the...

A Brief but Important Note on the Product Rule

ERIC Educational Resources Information Center

Merrotsy, Peter

2016-01-01

The leap into the wonderful world of differential calculus can be daunting for many students, and hence it is important to ensure that the landing is as gentle as possible. When the product rule, for example, is met in the "Australian Curriculum: Mathematics", sound pedagogy would suggest developing and presenting the result in a form…

Adaptive decision rules for the acquisition of nature reserves.

PubMed

Turner, Will R; Wilcove, David S

2006-04-01

Although reserve-design algorithms have shown promise for increasing the efficiency of conservation planning, recent work casts doubt on the usefulness of some of these approaches in practice. Using three data sets that vary widely in size and complexity, we compared various decision rules for acquiring reserve networks over multiyear periods. We explored three factors that are often important in real-world conservation efforts: uncertain availability of sites for acquisition, degradation of sites, and overall budget constraints. We evaluated the relative strengths and weaknesses of existing optimal and heuristic decision rules and developed a new set of adaptive decision rules that combine the strengths of existing optimal and heuristic approaches. All three of the new adaptive rules performed better than the existing rules we tested under virtually all scenarios of site availability, site degradation, and budget constraints. Moreover, the adaptive rules required no additional data beyond what was readily available and were relatively easy to compute.

Health Promotion in an Age of Normative Equity and Rampant Inequality

PubMed Central

Labonté, Ronald

2016-01-01

The world was different when the Ottawa Charter for Health Promotion was released 30 years ago. Concerns over the environment and what we now call the ‘social determinants of health’ were prominent in 1986. But the acceleration of ecological crises and economic inequalities since then, in a more complex and multi-polar world, pose dramatically new challenges for those committed to the original vision of the Charter. Can the 2015 Sustainable Development Goals (SDGs), agreed to by all the world’s governments, offer a new advocacy and programmatic platform for a renewal of health promotion’s founding ethos? Critiqued from both the right and the left for, respectively, their aspirational idealism and lack of political analysis, the SDGs are an imperfect but still compelling normative statement of how much of the world thinks the world should look like. Many of the goals and targets provide signals for what we need to achieve, even if there remains a critical lacuna in articulating how this is to be done. The fundamental flaw in the SDGs is the implicit assumption that the same economic system, and its still-present neoliberal governing rules, that have created or accelerated our present era of rampaging inequality and environmental peril can somehow be harnessed to engineer the reverse. This flaw is not irrevocable, however, if health promoters – practitioners, researchers, advocates – focus their efforts on a few key SDGs that, with some additional critique, form a basic blueprint for a system of national and global regulation of capitalism (or even its transformation) that is desperately needed for social and ecological survival into the 22nd century. Whether or not these efforts succeed is a future unknown; but that the efforts are made is a present urgency. PMID:28005546

Creating a Classroom Kaleidoscope with the World Wide Web.

ERIC Educational Resources Information Center

Quinlan, Laurie A.

1997-01-01

Discusses the elements of classroom Web presentations: planning; construction, including design tips; classroom use; and assessment. Lists 14 World Wide Web resources for K-12 teachers; Internet search tools (directories, search engines and meta-search engines); a Web glossary; and an example of HTML for a simple Web page. (PEN)

78 FR 34550 - Airworthiness Directives; Rolls-Royce plc Turbojet Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-10

... Airworthiness Directives; Rolls-Royce plc Turbojet Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. SUMMARY: We are adopting a new airworthiness directive (AD) for all Rolls-Royce plc..., contact Defence Aerospace Communications at Rolls-Royce plc, P.O. Box 3, Gypsy Patch Lane, Filton, Bristol...

77 FR 19544 - Regulated Navigation Area, Zidell Waterfront Property, Willamette River, OR

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-02

... damage the engineered sediment cap. DATES: This rule is effective May 2, 2012. ADDRESSES: Comments and..., dredging, grounding of large vessels, deployment of barge spuds, etc. Such damage could disrupt the... will do so by prohibiting certain maritime activities that could disturb or damage it. The engineered...

Full Hybrid: Overview

Science.gov Websites

conditions. stage graphic: vertical blue rule Main stage: See through car with battery, engine, generator , power split device, and electric motor visible. The car is stopped at an intersection. Main stage: See through car with battery, engine, generator, power split device, and electric motor visible. The car is

78 FR 19128 - Approval and Promulgation of Air Quality Implementation Plans; Ohio; Particulate Matter Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-29

... holidays. We recommend that you telephone Matt Rau, Environmental Engineer, at (312) 886-6524 before visiting the Region 5 office. FOR FURTHER INFORMATION CONTACT: Matt Rau, Environmental Engineer, Control..., Restrictions on Particulate Emissions from Industrial Sources, on December 13, 2011. The revised rule was...

Model-Based Building Verification in Aerial Photographs.

DTIC Science & Technology

1987-09-01

Powers ’ordon E. Schacher Chaii nan Dean of Science and Electrical and Computer Engineering Engineering "p. 5.€ ’ ,’"..€ € . € -, _ _ . ."€ . 4...paper, we have proposed an ex)erimental knowledge-based " verification syste, te organization for change (letection is oitliinet. , Kowledge rules and

14 CFR 125.377 - Fuel supply: Turbine-engine-powered airplanes other than turbopropeller.

Code of Federal Regulations, 2013 CFR

2013-01-01

... airplanes other than turbopropeller. 125.377 Section 125.377 Aeronautics and Space FEDERAL AVIATION...: CERTIFICATION AND OPERATIONS CERTIFICATION AND OPERATIONS: AIRPLANES HAVING A SEATING CAPACITY OF 20 OR MORE... AIRCRAFT Flight Release Rules § 125.377 Fuel supply: Turbine-engine-powered airplanes other than...

14 CFR 135.391 - Large nontransport category airplanes: En route limitations: One engine inoperative.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Large nontransport category airplanes: En... AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Airplane Performance Operating Limitations § 135.391 Large nontransport category airplanes: En route limitations: One engine inoperative. (a) Except as...

14 CFR 135.391 - Large nontransport category airplanes: En route limitations: One engine inoperative.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Large nontransport category airplanes: En... AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Airplane Performance Operating Limitations § 135.391 Large nontransport category airplanes: En route limitations: One engine inoperative. (a) Except as...

14 CFR 125.377 - Fuel supply: Turbine-engine-powered airplanes other than turbopropeller.

Code of Federal Regulations, 2014 CFR

2014-01-01

... airplanes other than turbopropeller. 125.377 Section 125.377 Aeronautics and Space FEDERAL AVIATION...: CERTIFICATION AND OPERATIONS CERTIFICATION AND OPERATIONS: AIRPLANES HAVING A SEATING CAPACITY OF 20 OR MORE... AIRCRAFT Flight Release Rules § 125.377 Fuel supply: Turbine-engine-powered airplanes other than...

14 CFR 135.391 - Large nontransport category airplanes: En route limitations: One engine inoperative.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Large nontransport category airplanes: En... AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Airplane Performance Operating Limitations § 135.391 Large nontransport category airplanes: En route limitations: One engine inoperative. (a) Except as...

14 CFR 125.377 - Fuel supply: Turbine-engine-powered airplanes other than turbopropeller.

Code of Federal Regulations, 2012 CFR

2012-01-01

... airplanes other than turbopropeller. 125.377 Section 125.377 Aeronautics and Space FEDERAL AVIATION...: CERTIFICATION AND OPERATIONS CERTIFICATION AND OPERATIONS: AIRPLANES HAVING A SEATING CAPACITY OF 20 OR MORE... AIRCRAFT Flight Release Rules § 125.377 Fuel supply: Turbine-engine-powered airplanes other than...

78 FR 14457 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-06

... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Parts 60 and 63 [EPA-HQ-OAR-2008-0708, FRL-9756-4] RIN 2060-AQ58 National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines; New Source Performance Standards for Stationary Internal Combustion Engines Correction In rule...

15 CFR 801.10 - Rules and regulations for the BE-120, Benchmark Survey of Transactions in Selected Services and...

Code of Federal Regulations, 2010 CFR

2010-01-01

...; educational and training services; engineering, architectural, and surveying services; financial services (purchases only, by companies or parts of companies that are not financial services providers); industrial engineering services; industrial-type maintenance, installation, alteration, and training services; legal...

15 CFR 801.10 - Rules and regulations for the BE-120, Benchmark Survey of Transactions in Selected Services and...

Code of Federal Regulations, 2011 CFR

2011-01-01

...; educational and training services; engineering, architectural, and surveying services; financial services (purchases only, by companies or parts of companies that are not financial services providers); industrial engineering services; industrial-type maintenance, installation, alteration, and training services; legal...

14 CFR 135.391 - Large nontransport category airplanes: En route limitations: One engine inoperative.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Large nontransport category airplanes: En... AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Airplane Performance Operating Limitations § 135.391 Large nontransport category airplanes: En route limitations: One engine inoperative. (a) Except as...

Navigating Social Networks

ERIC Educational Resources Information Center

Hamblin, DeAnna; Bartlett, Marilyn J.

2013-01-01

The authors note that when it comes to balancing free speech and schools' responsibilities, the online world is largely uncharted waters. Questions remain about the rights of both students and teachers in the world of social media. Although the lower courts have ruled that students' freedom of speech rights offer them some protection for…

Web Feet Guide to Search Engines: Finding It on the Net.

ERIC Educational Resources Information Center

Web Feet, 2001

2001-01-01

This guide to search engines for the World Wide Web discusses selecting the right search engine; interpreting search results; major search engines; online tutorials and guides; search engines for kids; specialized search tools for various subjects; and other specialized engines and gateways. (LRW)

Numbers for the Innumerate: Everyday Arithmetic and Atlantic Capitalism.

PubMed

Rosenthal, Caitlin

In nineteenth-century America and the Atlantic world, the "rule of three" was usually regarded as the endpoint of a basic mathematics education. This essay considers the importance of the rule as a technology that enabled broader access to the calculations necessary to participate in the increasingly global market economy. Used by workmen, women, and even the enslaved, the rule and related tools translated basic literacy into practical numeracy. By doing so, it offered a diverse range of people the ability to negotiate more effectively. At the same time, however, the rule's spread helped to legitimate particular types of exchange and commensuration, and with them the emerging capitalist economy.

Bendability optimization of flexible optical nanoelectronics via neutral axis engineering

PubMed Central

2012-01-01

The enhancement of bendability of flexible nanoelectronics is critically important to realize future portable and wearable nanoelectronics for personal and military purposes. Because there is an enormous variety of materials and structures that are used for flexible nanoelectronic devices, a governing design rule for optimizing the bendability of these nanodevices is required. In this article, we suggest a design rule to optimize the bendability of flexible nanoelectronics through neutral axis (NA) engineering. In flexible optical nanoelectronics, transparent electrodes such as indium tin oxide (ITO) are usually the most fragile under an external load because of their brittleness. Therefore, we representatively focus on the bendability of ITO which has been widely used as transparent electrodes, and the NA is controlled by employing a buffer layer on the ITO layer. First, we independently investigate the effect of the thickness and elastic modulus of a buffer layer on the bendability of an ITO film. Then, we develop a design rule for the bendability optimization of flexible optical nanoelectronics. Because NA is determined by considering both the thickness and elastic modulus of a buffer layer, the design rule is conceived to be applicable regardless of the material and thickness that are used for the buffer layer. Finally, our design rule is applied to optimize the bendability of an organic solar cell, which allows the bending radius to reach about 1 mm. Our design rule is thus expected to provide a great strategy to enhance the bending performance of a variety of flexible nanoelectronics. PMID:22587757

Bendability optimization of flexible optical nanoelectronics via neutral axis engineering.

PubMed

Lee, Sangmin; Kwon, Jang-Yeon; Yoon, Daesung; Cho, Handong; You, Jinho; Kang, Yong Tae; Choi, Dukhyun; Hwang, Woonbong

2012-05-15

The enhancement of bendability of flexible nanoelectronics is critically important to realize future portable and wearable nanoelectronics for personal and military purposes. Because there is an enormous variety of materials and structures that are used for flexible nanoelectronic devices, a governing design rule for optimizing the bendability of these nanodevices is required. In this article, we suggest a design rule to optimize the bendability of flexible nanoelectronics through neutral axis (NA) engineering. In flexible optical nanoelectronics, transparent electrodes such as indium tin oxide (ITO) are usually the most fragile under an external load because of their brittleness. Therefore, we representatively focus on the bendability of ITO which has been widely used as transparent electrodes, and the NA is controlled by employing a buffer layer on the ITO layer. First, we independently investigate the effect of the thickness and elastic modulus of a buffer layer on the bendability of an ITO film. Then, we develop a design rule for the bendability optimization of flexible optical nanoelectronics. Because NA is determined by considering both the thickness and elastic modulus of a buffer layer, the design rule is conceived to be applicable regardless of the material and thickness that are used for the buffer layer. Finally, our design rule is applied to optimize the bendability of an organic solar cell, which allows the bending radius to reach about 1 mm. Our design rule is thus expected to provide a great strategy to enhance the bending performance of a variety of flexible nanoelectronics.

Performance scores and standings during the 43rd Artistic Gymnastics World Championships, 2011.

PubMed

Massidda, Myosotis; Calò, Carla M

2012-01-01

Scores in artistic gymnastics are subject to changes in the rules that occur each Olympic cycle as outlined in the Code of Points, because rules influence the composition of routines and therefore performance. The aim of this study was to identify the most important routine apparatus for success in a World competition. The data were the official results for the 478 gymnasts (262 men, 216 women) who competed in the 43rd Artistic Gymnastic World Championships in 2011 in Tokyo, Japan. The factors least influenced by the technical standard of competitors were performance scores on uneven bars and balance beam for women, and those on pommel horse for men. For uneven bars, balance beam, and pommel horse, scores were consistently good predictors of final standing. Our results suggest that high scores on these apparatus have a greater influence on overall performance than scores on the other apparatus, regardless of the competitors' standard.

World coal output continues upward trend

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1976-08-01

Recently released figures from the US Bureau of Mines indicate a continuing upward trend in world coal production in 1975. On the African continent, hard coal production was generally higher than in 1974, the major increases in output coming from South Africa (production up 7.5 percent on 1974) and Rhodesia (up 4.3 percent). Gains in production in 1975 were in fact the general rule throughout the world's leading coal producing countries.

Biomedical engineering education--status and perspectives.

PubMed

Magjarevic, Ratko; Zequera Diaz, Martha L

2014-01-01

Biomedical Engineering programs are present at a large number of universities all over the world with an increasing trend. New generations of biomedical engineers have to face the challenges of health care systems round the world which need a large number of professionals not only to support the present technology in the health care system but to develop new devices and services. Health care stakeholders would like to have innovative solutions directed towards solving problems of the world growing incidence of chronic disease and ageing population. These new solutions have to meet the requirements for continuous monitoring, support or care outside clinical settlements. Presence of these needs can be tracked through data from the Labor Organization in the U.S. showing that biomedical engineering jobs have the largest growth at the engineering labor market with expected 72% growth rate in the period from 2008-2018. In European Union the number of patents (i.e. innovation) is the highest in the category of biomedical technology. Biomedical engineering curricula have to adopt to the new needs and for expectations of the future. In this paper we want to give an overview of engineering professions in related to engineering in medicine and biology and the current status of BME education in some regions, as a base for further discussions.

Discovering Sentinel Rules for Business Intelligence

NASA Astrophysics Data System (ADS)

Middelfart, Morten; Pedersen, Torben Bach

This paper proposes the concept of sentinel rules for multi-dimensional data that warns users when measure data concerning the external environment changes. For instance, a surge in negative blogging about a company could trigger a sentinel rule warning that revenue will decrease within two months, so a new course of action can be taken. Hereby, we expand the window of opportunity for organizations and facilitate successful navigation even though the world behaves chaotically. Since sentinel rules are at the schema level as opposed to the data level, and operate on data changes as opposed to absolute data values, we are able to discover strong and useful sentinel rules that would otherwise be hidden when using sequential pattern mining or correlation techniques. We present a method for sentinel rule discovery and an implementation of this method that scales linearly on large data volumes.

A study of the displacement of a Wankel rotary engine

NASA Astrophysics Data System (ADS)

Beard, J. E.; Pennock, G. R.

1993-03-01

The volumetric displacement of a Wankel rotary engine is a function of the trochoid ratio and the pin size ratio, assuming the engine has a unit depth and the number of lobes is specified. The mathematical expression which defines the displacement contains a function which can be evaluated directly and a normal elliptic integral of the second type which does not have an explicit solution. This paper focuses on the contribution of the elliptic integral to the total displacement of the engine. The influence of the elliptic integral is shown to account for as much as 20 percent of the total displacement, depending on the trochoid ratio and the pin size ratio. Two numerical integration techniques are compared in the paper, namely, the trapezoidal rule and Simpson's 1/3 rule. The bounds on the error, associated with each numerical method, are analyzed. The results indicate that the numerical method has a minimal effect on the accuracy of the calculated displacement for a practical number of integration steps. The paper also evaluates the influence of manufacturing tolerances on the calculated displacement and the actual displacement. Finally. a numerical example of the common three-lobed Wankel rotary engine is included for illustrative purposes.

Methods for automated semantic definition of manufacturing structures (mBOM) in mechanical engineering companies

NASA Astrophysics Data System (ADS)

Stekolschik, Alexander, Prof.

2017-10-01

The bill of materials (BOM), which involves all parts and assemblies of the product, is the core of any mechanical or electronic product. The flexible and integrated management of engineering (Engineering Bill of Materials [eBOM]) and manufacturing (Manufacturing Bill of Materials [mBOM]) structures is the key to the creation of modern products in mechanical engineering companies. This paper presents a method framework for the creation and control of e- and, especially, mBOM. The requirements, resulting from the process of differentiation between companies that produce serialized or engineered-to-order products, are considered in the analysis phase. The main part of the paper describes different approaches to fully or partly automated creation of mBOM. The first approach is the definition of part selection rules in the generic mBOM templates. The mBOM can be derived from the eBOM for partly standardized products by using this method. Another approach is the simultaneous use of semantic rules, options, and parameters in both structures. The implementation of the method framework (selection of use cases) in a standard product lifecycle management (PLM) system is part of the research.

Engineering Education for a New Era

NASA Astrophysics Data System (ADS)

Ohgaki, Shinichiro

Engineering education is composed of five components, the idea what engineering education ought to be, the knowledge in engineering fields, those who learn engineering, those who teach engineering and the stakeholders in engineering issues. The characteristics of all these five components are changing with the times. When we consider the engineering education for the next era, we should analyze the changes of all five components. Especially the knowledge and tools in engineering fields has been expanding, and advanced science and technology is casting partly a dark shadow on the modern convenient life. Moral rules or ethics for developing new products and engineering systems are now regarded as most important in engineering fields. All those who take the responsibility for engineering education should understand the change of all components in engineering education and have a clear grasp of the essence of engineering for sustainable society.

The Effect of World War II on Women in Engineering

NASA Astrophysics Data System (ADS)

Barker, Anne M.

The field of engineering has been one of the most difficult for women to enter. Even with an increase in the proportion of women in the engineering workforce from 0.3% before the 1970s to 9.5% in 1999, women are still seriously underrepresented. This article examines the history of women in engineering in the United States during World War II. Women were actively recruited as engineering aides by the federal government, which saw them as a temporary substitute for men who were in the military. Yet this crisis did not break down the barriers to and prejudices against women in engineering, nor did it give them a real opportunity to become professional engineers equal to men. After the war, calls for a return to normalcy were used to reestablish social norms, which kept women at home and reserved desirable places in the workforce, including in engineering, for men.

A systems engineering approach to automated failure cause diagnosis in space power systems

NASA Technical Reports Server (NTRS)

Dolce, James L.; Faymon, Karl A.

1987-01-01

Automatic failure-cause diagnosis is a key element in autonomous operation of space power systems such as Space Station's. A rule-based diagnostic system has been developed for determining the cause of degraded performance. The knowledge required for such diagnosis is elicited from the system engineering process by using traditional failure analysis techniques. Symptoms, failures, causes, and detector information are represented with structured data; and diagnostic procedural knowledge is represented with rules. Detected symptoms instantiate failure modes and possible causes consistent with currently held beliefs about the likelihood of the cause. A diagnosis concludes with an explanation of the observed symptoms in terms of a chain of possible causes and subcauses.

Nanoparticle Superlattice Engineering with DNA

NASA Astrophysics Data System (ADS)

Macfarlane, Robert J.; Lee, Byeongdu; Jones, Matthew R.; Harris, Nadine; Schatz, George C.; Mirkin, Chad A.

2011-10-01

A current limitation in nanoparticle superlattice engineering is that the identities of the particles being assembled often determine the structures that can be synthesized. Therefore, specific crystallographic symmetries or lattice parameters can only be achieved using specific nanoparticles as building blocks (and vice versa). We present six design rules that can be used to deliberately prepare nine distinct colloidal crystal structures, with control over lattice parameters on the 25- to 150-nanometer length scale. These design rules outline a strategy to independently adjust each of the relevant crystallographic parameters, including particle size (5 to 60 nanometers), periodicity, and interparticle distance. As such, this work represents an advance in synthesizing tailorable macroscale architectures comprising nanoscale materials in a predictable fashion.

Engineering with uncertainty: monitoring air bag performance.

PubMed

Wetmore, Jameson M

2008-06-01

Modern engineering is complicated by an enormous number of uncertainties. Engineers know a great deal about the material world and how it works. But due to the inherent limits of testing and the complexities of the world outside the lab, engineers will never be able to fully predict how their creations will behave. One way the uncertainties of engineering can be dealt with is by actively monitoring technologies once they have left the development and production stage. This article uses an episode in the history of automobile air bags as an example of engineers who had the foresight and initiative to carefully track the technology on the road to discover problems as early as possible. Not only can monitoring help engineers identify problems that surface in the field, it can also assist them in their efforts to mobilize resources to resolve problem.

Differences between emissions measured in urban driving and certification testing of heavy-duty diesel engines

NASA Astrophysics Data System (ADS)

Dixit, Poornima; Miller, J. Wayne; Cocker, David R.; Oshinuga, Adewale; Jiang, Yu; Durbin, Thomas D.; Johnson, Kent C.

2017-10-01

Emissions from eight heavy-duty diesel trucks (HDDTs) equipped with three different exhaust aftertreatment systems (ATS) for controlling nitrogen oxide (NOx) emissions were quantified on a chassis dynamometer using driving schedules representative of stop-and-go and free-flow driving in metropolitan areas. The three control technologies were: 1) cooled exhaust gas recirculation (CEGR) plus a diesel particulate filter (DPF); 2) CEGR and DPF plus advanced engine controls; and 3) CEGR and DPF plus selective catalytic reduction with ammonia (SCR). Results for all control technologies and driving conditions showed PM emission factors were less than the standard, while selected non-regulated emissions (ammonia, carbonyls, and C4-C12 hydrocarbons) and a greenhouse gas (nitrous oxide) were at measurement detection limits. However, NOx emission factors depended on the control technology, engine calibration, and driving mode. For example, emissions from engines with cooled-exhaust gas recirculation (CEGR) were 239% higher for stop-and-go driving as compared with free-flow. For CEGR plus selective catalytic reduction (SCR), the ratio was 450%. A deeper analysis was carried out with the assumption that emissions measured for a drive cycle on either the chassis or in-use driving would be similar. Applying the same NTE rules to the chassis data showed emissions during stop-and-go driving often exceeded the certification standard and >90% of the driving did not fall within the Not-To-Exceed (NTE) control area suggesting the NTE requirements do not provide sufficient emissions control under in-use conditions. On-road measurement of emissions using the same mobile lab while the vehicle followed a free-flow driving schedule verified the chassis results. These results have implications for scientists who build inventories using certification values instead of real world emission values and for metropolitan populations, who are exposed to elevated emissions. The differences in values between real world emissions and certification cycles should be narrowed. For example, one might use a different mix of cold and hot start testing to greater emphasize low temperature/load operation, a separate cycle to specifically characterize low-load operation, or broaden the in-use compliance testing requirements and associated conformity factors to incorporate a wider envelope of vehicle operation, especially at low load conditions. .

Training Extract, AFSC 113X0B, Flight Engineer, Helicopter Qualified.

DTIC Science & Technology

1982-12-01

TRAINING .................................................................. 1I0 SE. GENERAL rLIGHT RULES A 9 C t | 7. PeRFORM INSPECIIOIS 12 7A... TRAINING .................................................................. lIC 6E. GENERAL FLIGHT RULES A a C...ME"BERS PERFORMING I-A I PROGRAM GENERATED VECTOR IMEMBERS/ NO TYPE VECTOR MEAN - SC DESCRIPTION I TN. SEP J.6 2.J TRAINING EMPHASIS RATINSS I IIOS

Rules of the New York State Board of Regents Relating to Definitions of Unprofessional Conduct, with Amendments Adopted through November 1984.

ERIC Educational Resources Information Center

New York State Education Dept., Albany.

Rules concerning unprofessional conduct are offered by the New York State Board of Regents. Attention is directed to: general provisions for all professions, health professions, and design professions (e.g., architecture and engineering), as well as special provisions for: the medical profession, the dentistry and dental hygiene professions, the…

33 CFR 210.5 - Rules of the Corps of Engineers Board of Contract Appeals for cases subject to the Contract...

Code of Federal Regulations, 2012 CFR

2012-07-01

... evidence, admissions, stipulations, transcripts of conferences and hearings, hearing exhibits, post-hearing... pertinent factors. On request or motion by either party and for good cause, the Board may, in its discretion... therefor, during the hearing or at the conclusion thereof. (x) Rule 23, Post-hearing briefs. Post-hearing...

33 CFR 210.5 - Rules of the Corps of Engineers Board of Contract Appeals for cases subject to the Contract...

Code of Federal Regulations, 2011 CFR

2011-07-01

... evidence, admissions, stipulations, transcripts of conferences and hearings, hearing exhibits, post-hearing... pertinent factors. On request or motion by either party and for good cause, the Board may, in its discretion... therefor, during the hearing or at the conclusion thereof. (x) Rule 23, Post-hearing briefs. Post-hearing...

33 CFR 210.5 - Rules of the Corps of Engineers Board of Contract Appeals for cases subject to the Contract...

Code of Federal Regulations, 2014 CFR

2014-07-01

... evidence, admissions, stipulations, transcripts of conferences and hearings, hearing exhibits, post-hearing... pertinent factors. On request or motion by either party and for good cause, the Board may, in its discretion... therefor, during the hearing or at the conclusion thereof. (x) Rule 23, Post-hearing briefs. Post-hearing...

33 CFR 210.5 - Rules of the Corps of Engineers Board of Contract Appeals for cases subject to the Contract...

Code of Federal Regulations, 2010 CFR

2010-07-01

... evidence, admissions, stipulations, transcripts of conferences and hearings, hearing exhibits, post-hearing... pertinent factors. On request or motion by either party and for good cause, the Board may, in its discretion... therefor, during the hearing or at the conclusion thereof. (x) Rule 23, Post-hearing briefs. Post-hearing...

33 CFR 210.5 - Rules of the Corps of Engineers Board of Contract Appeals for cases subject to the Contract...

Code of Federal Regulations, 2013 CFR

2013-07-01

... evidence, admissions, stipulations, transcripts of conferences and hearings, hearing exhibits, post-hearing... pertinent factors. On request or motion by either party and for good cause, the Board may, in its discretion... therefor, during the hearing or at the conclusion thereof. (x) Rule 23, Post-hearing briefs. Post-hearing...

Contracts in the Classroom--Providing Undergraduate Business Students with Important "Real Life" Skills

ERIC Educational Resources Information Center

Denbo, Susan M.

2005-01-01

Many business law educators have recognized the importance of teaching students not only the rules of contract law, but the process of implementing these rules in the "real world" of business. This article discusses a contract negotiation exercise that enables students to apply the black letter law of contracts while at the same time honing their…

Of Codes and Crowns: The Development of Law. [Student's Book] Law-in-Social Studies Series.

ERIC Educational Resources Information Center

Suter, Coral; Croddy, Marshall

Intended to supplement secondary level world history courses, this booklet will help students understand the history of and need for rules and laws. There are five units. In the first unit, students examine evidence from anthropology and archaeology which show how rules developed in prehistoric cultures. The second unit deals with the Code of…

The IAHR project CCHE-Climate Change impact on the Hydrological cycle, water management and Engineering: an overview and preliminary results

NASA Astrophysics Data System (ADS)

Ranzi, Roberto; Kojiri, T.; Mynett, A.; Barontini, S.; van de Giesen, N.; Kolokytha, E.; Ngo, L. A.; Oreamuno, R.; Renard, B.; Sighomnou, D.; Vizina, A.

2010-05-01

IAHR, the International Association for Hydro-Environment Engineering and Research launched a research Project called Climate Change impact on the Hydrological cycle, water management and Engineering (IAHR CCHE Project). It was motivated by the fact that, although it is now well accepted that, in the light of the recent IPCC reports the vast majority of members of the scientific community are convinced that the climate is changing or at least will experience a significant fluctuation already during the current century, it is perceived that some hydrologists, water experts and hydraulic engineers are not yet ready to incorporate climate change scenarios in their designs for such projects as: - flood protection and river training, - dam rehabilitation, - water resources management under water scarcity and changes in the hydrological regimes. The objective of the project is to encourage a close co-operation between the scientific and engineering communities in taking appropriate and timely action in response to the impact of climate change on the hydrological regime and on water resource projects. The project aims at reporting on (a) the current state of knowledge as regards the impact of projected climate change on the hydrological regime in different regions of the world, where these regions are defined not just in geographic terms but also on the basis of their level of economic and water resources development; (b) the extent to which these impacts are recognized and taken into account by national water authorities, engineering organizations and other regulating bodies in setting their standard practices and procedures for the planning, design and operation of water works. These adaptation measures will include both "hard" responses, such as the construction or enlargement of engineering structures, and "soft" responses, such as changes in legislation or the operating rules of existing structures. An overview of the project and preliminary results extracted from of an Inventory of existing studies and projects considering observed and projected trends in the hydrological regimes of riverbasins and adaptation measures of the structural and non-structural type in Europe, Africa, America, Asia and Oceania and are presented.

Women in a Man's World: The Female Engineers

ERIC Educational Resources Information Center

Durchholz, Pat

1977-01-01

Comparisons and contrasts between female engineers, male engineers, and female scientists are made utilizing freshmen engineering and science students at the University of Cincinnati. Data including attitudes, career influences, parents' educational level, and career advantage ranking are included. (SL)

10 CFR Appendix C to Part 52 - Design Certification Rule for the AP600 Design

Code of Federal Regulations, 2011 CFR

2011-01-01

..., Manager, Passive Plant Engineering, Westinghouse Electric Company, P.O. Box 355, Pittsburgh, Pennsylvania... Web site, http://www.nrc.gov, and/or at the NRC Public Document Room, is insufficient; c. The...) Fuel criteria evaluation process. (4) Fire areas. (5) Human factors engineering. c. A licensee who...

10 CFR Appendix C to Part 52 - Design Certification Rule for the AP600 Design

Code of Federal Regulations, 2010 CFR

2010-01-01

..., Manager, Passive Plant Engineering, Westinghouse Electric Company, P.O. Box 355, Pittsburgh, Pennsylvania... Web site, http://www.nrc.gov, and/or at the NRC Public Document Room, is insufficient; c. The...) Fuel criteria evaluation process. (4) Fire areas. (5) Human factors engineering. c. A licensee who...

Investigating the Impacts of Design Heuristics on Idea Initiation and Development

ERIC Educational Resources Information Center

Kramer, Julia; Daly, Shanna R.; Yilmaz, Seda; Seifert, Colleen M.; Gonzalez, Richard

2015-01-01

This paper presents an analysis of engineering students' use of Design Heuristics as part of a team project in an undergraduate engineering design course. Design Heuristics are an empirically derived set of cognitive "rules of thumb" for use in concept generation. We investigated heuristic use in the initial concept generation phase,…

49 CFR 240.129 - Criteria for monitoring operational performance of certified engineers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... railroad's rules and practices for the safe operation of locomotives and trains; (2) Be designed so that... service. (c) The procedures shall: (1) Be designed to determine that the person possesses and routinely... operational performance monitoring will be conducted; (3) Be designed so that the locomotive engineer is...

78 FR 3928 - Self-Regulatory Organizations; The NASDAQ Stock Market LLC; Order Disapproving Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-17

... system protocol, to the NASDAQ matching engine or to the NASDAQ router as needed to complete the... Order application to the order entry gateway of NASDAQ's matching engine, but the amount of time gained... proposal represents another example of the blurring borders between exchanges and broker-dealers, and...

Full Hybrid: Cruising

Science.gov Websites

for storage. Go back… stage graphic: vertical blue rule Main stage: See through car with battery , engine, generator, power split device, and electric motor visible. The car is moving. There are arrows flowing from the gasoline engine to the generator to the battery. Main stage: See through car with battery

Hybrid: Braking

Science.gov Websites

automatically. Go back… stage graphic: vertical blue rule Main stage: See through car with battery, engine, and electric motor visible. The car is stopped at an intersection. Main stage: See through car with battery , engine, and electric motor visible. The car is stopped at an intersection. Battery: The battery stores

Stop/Start: Overview

Science.gov Websites

: vertical blue rule Main stage: See through car with battery, engine, and electric starter/generator visible . The car is stopped at an intersection. Main stage: See through car with battery, engine, and electric starter/generator visible. The car is stopped at an intersection. Battery: The battery is used to store

Full Hybrid: Braking

Science.gov Websites

: vertical blue rule Main stage: See through car with battery, engine, generator, power split device, and electric motor visible. The car is stopped at an intersection. Main stage: See through car with battery , engine, generator, power split device, and electric motor visible. The car is stopped at an intersection

75 FR 68575 - Revisions To In-Use Testing for Heavy-Duty Diesel Engines and Vehicles; Emissions Measurement and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-08

... this rule. F. Revision of 40 CFR 1065.915 To Allow the Use of ECM Fuel Rate To Determine NTE Mass... electronic control module (ECM) along with other information, including the CO 2 , CO, and hydrocarbon... all large horsepower nonroad diesel engines will [[Page 68580

76 FR 76143 - Tapered Roller Bearings and Parts Thereof, Finished and Unfinished, From the People's Republic of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-06

..., the United Steel, Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial and Service... from Blackstone OTR LLC and OTR Wheel Engineering, Inc. (collectively, ``Blackstone OTR''), the... Ruling on Blackstone OTR LLC and OTR Wheel Engineering, Inc.'s Wheel Hub Assemblies and TRBs,'' dated...

75 FR 76004 - Agency Information Collection Activities OMB Responses

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-07

... without change. EPA ICR Number 1975.08; NESHAP for Stationary Reciprocating Internal Combustion Engines... Motor Vehicles (Proposed Rule); in 40 CFR parts 85, 86 and 600; OMB filed comment on 11/12/2010. EPA ICR... Duty Engines and Vehicles Equipped with On-Board Diagnostics (PR for Alt Fuel Conversion of Heavy-duty...

75 FR 50865 - Airworthiness Directives; Various Aircraft Equipped With Rotax Aircraft Engines 912 A Series Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-18

... available in the AD docket shortly after receipt. List of Subjects in 14 CFR Part 39 Air transportation... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2010...: Federal Aviation Administration (FAA), Department of Transportation (DOT). ACTION: Final rule. SUMMARY: We...

77 FR 52201 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-29

... with new parts and tubing on the left and right engines; and installing Aero-Engine database (AEDB...;Prices of new books are listed in the first FEDERAL REGISTER issue of each #0;week. #0; #0; #0; #0;#0.... ACTION: Final rule. SUMMARY: We are adopting a new airworthiness directive (AD) for certain The Boeing...

75 FR 50847 - Cotton Program Changes for Upland Cotton, Adjusted World Price, and Active Shipping Orders

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-18

... Cotton Program Changes for Upland Cotton, Adjusted World Price, and Active Shipping Orders AGENCY... previous final rule that implemented the 2008 Farm Bill provisions for the cotton program. The correction removes definitions that are no longer used concerning Northern Europe prices for cotton. CCC is also...

Administrative Aspects of Third World Library Development: The Five "Pillars" of Sustainable Information Transfer.

ERIC Educational Resources Information Center

Emerson, Susan Vince; And Others

Third World libraries, as a rule, receive information technology, technical assistance, and training as part of international development projects. Library improvements and their intended objective, information transfer, are more effective and lasting if key administrative and policy issues are addressed by the projects. Critical success factors…

The future of public hospitals in a globalized world: corporate governance, corporatization or privatization?

PubMed

Mordelet, Patrick

2008-01-01

This paper contributes to research in health systems and hospitals governance by examining the reasons and expected outcomes of the generalization of corporate governance rules in both public and private non-profit hospitals, all over the world, in order to achieve its clinical, quality and financial objectives.

World Culture and Experienced Primary School Teachers' Understandings of Educational Changes in Taiwan

ERIC Educational Resources Information Center

Ke, I-Chung

2008-01-01

Studies by neo-institutionalists in sociology suggest that the institutions, organizations and governing rules in the environment are becoming more similar worldwide as the process of globalization continues. A so-called "world culture" based on science was hypothesized to explain the phenomena related to standardization and convergence.…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sileghem, L.; Wallner, T.; Verhelst, S.

As knock is one of the main factors limiting the efficiency of spark-ignition engines, the introduction of alcohol blends could help to mitigate knock concerns due to the elevated knock resistance of these blends. A model that can accurately predict their autoignition behavior would be of great value to engine designers. The current work aims to develop such a model for alcohol–gasoline blends. First, a mixing rule for the autoignition delay time of alcohol–gasoline blends is proposed. Subsequently, this mixing rule is used together with an autoignition delay time correlation of gasoline and an autoignition delay time cor-relation of methanolmore » in a knock integral model that is implemented in a two-zone engine code. The pre-dictive performance of the resulting model is validated through comparison against experimental measurements on a CFR engine for a range of gasoline–methanol blends. The knock limited spark advance, the knock intensity, the knock onset crank angle and the value of the knock integral at the experimental knock onset have been simulated and compared to the experimental values derived from in-cylinder pressure measurements.« less

Impacts of a Flat World on Engineering Education

ERIC Educational Resources Information Center

Chatziioanou, Alypios

2006-01-01

This paper discusses the changes to engineering education introduced through the accelerated engineering-related industrial growth in Asian and other developing countries. While the demand for engineering services is increasing, these nations educate a large number of engineers themselves and many are providing lower-cost alternatives for…

Integrated approach using data mining-based decision tree and object-based image analysis for high-resolution urban mapping of WorldView-2 satellite sensor data

NASA Astrophysics Data System (ADS)

Hamedianfar, Alireza; Shafri, Helmi Zulhaidi Mohd

2016-04-01

This paper integrates decision tree-based data mining (DM) and object-based image analysis (OBIA) to provide a transferable model for the detailed characterization of urban land-cover classes using WorldView-2 (WV-2) satellite images. Many articles have been published on OBIA in recent years based on DM for different applications. However, less attention has been paid to the generation of a transferable model for characterizing detailed urban land cover features. Three subsets of WV-2 images were used in this paper to generate transferable OBIA rule-sets. Many features were explored by using a DM algorithm, which created the classification rules as a decision tree (DT) structure from the first study area. The developed DT algorithm was applied to object-based classifications in the first study area. After this process, we validated the capability and transferability of the classification rules into second and third subsets. Detailed ground truth samples were collected to assess the classification results. The first, second, and third study areas achieved 88%, 85%, and 85% overall accuracies, respectively. Results from the investigation indicate that DM was an efficient method to provide the optimal and transferable classification rules for OBIA, which accelerates the rule-sets creation stage in the OBIA classification domain.

Decision support system for triage management: A hybrid approach using rule-based reasoning and fuzzy logic.

PubMed

Dehghani Soufi, Mahsa; Samad-Soltani, Taha; Shams Vahdati, Samad; Rezaei-Hachesu, Peyman

2018-06-01

Fast and accurate patient triage for the response process is a critical first step in emergency situations. This process is often performed using a paper-based mode, which intensifies workload and difficulty, wastes time, and is at risk of human errors. This study aims to design and evaluate a decision support system (DSS) to determine the triage level. A combination of the Rule-Based Reasoning (RBR) and Fuzzy Logic Classifier (FLC) approaches were used to predict the triage level of patients according to the triage specialist's opinions and Emergency Severity Index (ESI) guidelines. RBR was applied for modeling the first to fourth decision points of the ESI algorithm. The data relating to vital signs were used as input variables and modeled using fuzzy logic. Narrative knowledge was converted to If-Then rules using XML. The extracted rules were then used to create the rule-based engine and predict the triage levels. Fourteen RBR and 27 fuzzy rules were extracted and used in the rule-based engine. The performance of the system was evaluated using three methods with real triage data. The accuracy of the clinical decision support systems (CDSSs; in the test data) was 99.44%. The evaluation of the error rate revealed that, when using the traditional method, 13.4% of the patients were miss-triaged, which is statically significant. The completeness of the documentation also improved from 76.72% to 98.5%. Designed system was effective in determining the triage level of patients and it proved helpful for nurses as they made decisions, generated nursing diagnoses based on triage guidelines. The hybrid approach can reduce triage misdiagnosis in a highly accurate manner and improve the triage outcomes. Copyright © 2018 Elsevier B.V. All rights reserved.

Experiments on neural network architectures for fuzzy logic

NASA Technical Reports Server (NTRS)

Keller, James M.

1991-01-01

The use of fuzzy logic to model and manage uncertainty in a rule-based system places high computational demands on an inference engine. In an earlier paper, the authors introduced a trainable neural network structure for fuzzy logic. These networks can learn and extrapolate complex relationships between possibility distributions for the antecedents and consequents in the rules. Here, the power of these networks is further explored. The insensitivity of the output to noisy input distributions (which are likely if the clauses are generated from real data) is demonstrated as well as the ability of the networks to internalize multiple conjunctive clause and disjunctive clause rules. Since different rules with the same variables can be encoded in a single network, this approach to fuzzy logic inference provides a natural mechanism for rule conflict resolution.

Prestraining and Its Influence on Subsequent Fatigue Life

NASA Technical Reports Server (NTRS)

Halford, Gary R.; Mcgaw, Michael A.; Kalluri, Sreeramesh

1995-01-01

An experimental program was conducted to study the damaging effects of tensile and compressive prestrains on the fatigue life of nickel-base, Inconel 718 superalloy at room temperature. To establish baseline fatigue behavior, virgin specimens with a solid uniform gage section were fatigued to failure under fully-reversed strain-control. Additional specimens were prestrained to 2 percent, 5 percent, and 10 percent (engineering strains) in the tensile direction and to 2 percent (engineering strain) in the compressive direction under stroke-control, and were subsequently fatigued to failure under fully-reversed strain-control. Experimental results are compared with estimates of remaining fatigue lives (after prestraining) using three life prediction approaches: (1) the Linear Damage Rule; (2) the Linear Strain and Life Fraction Rule; and (3) the nonlinear Damage Curve Approach. The Smith-Watson-Topper parameter was used to estimate fatigue lives in the presence of mean stresses. Among the cumulative damage rules investigated, best remaining fatigue life predictions were obtained with the nonlinear Damage Curve Approach.

A quantum theory account of order effects and conjunction fallacies in political judgments.

PubMed

Yearsley, James M; Trueblood, Jennifer S

2017-09-06

Are our everyday judgments about the world around us normative? Decades of research in the judgment and decision-making literature suggest the answer is no. If people's judgments do not follow normative rules, then what rules if any do they follow? Quantum probability theory is a promising new approach to modeling human behavior that is at odds with normative, classical rules. One key advantage of using quantum theory is that it explains multiple types of judgment errors using the same basic machinery, unifying what have previously been thought of as disparate phenomena. In this article, we test predictions from quantum theory related to the co-occurrence of two classic judgment phenomena, order effects and conjunction fallacies, using judgments about real-world events (related to the U.S. presidential primaries). We also show that our data obeys two a priori and parameter free constraints derived from quantum theory. Further, we examine two factors that moderate the effects, cognitive thinking style (as measured by the Cognitive Reflection Test) and political ideology.

Science and the rules governing anti-doping violations.

PubMed

Bowers, Larry D

2010-01-01

The fight against the use of performance-enhancing drugs in sports has been in effect for nearly 90 years. The formation of the World Anti-Doping Agency in 1999 was a major event because an independent agency was entrusted with harmonization of the antidoping program. In addition to sports governing bodies, governments have endorsed WADA and its programs by signing a United Nations Education, Science, and Cultural Organization Convention on Doping. The first step in the harmonization process was the development of the World Anti-Doping Program. This program consisted of five documents - the Code, the International Standard for Testing, the International Standard for Laboratories, the Prohibited List, and the International Standard for Therapeutic Use Exemptions - which unified the approach of the international federations and national antidoping agencies in applying antidoping rules. For laboratory testing, the International Standard for Laboratories establishes the performance expectations for and competence of laboratories recognized by WADA, including accreditation under ISO/IEC 17025. The antidoping rules are adjudicated by arbitration using the internationally recognized Court of Arbitration for Sport.

Efficient Reverse-Engineering of a Developmental Gene Regulatory Network

PubMed Central

Cicin-Sain, Damjan; Ashyraliyev, Maksat; Jaeger, Johannes

2012-01-01

Understanding the complex regulatory networks underlying development and evolution of multi-cellular organisms is a major problem in biology. Computational models can be used as tools to extract the regulatory structure and dynamics of such networks from gene expression data. This approach is called reverse engineering. It has been successfully applied to many gene networks in various biological systems. However, to reconstitute the structure and non-linear dynamics of a developmental gene network in its spatial context remains a considerable challenge. Here, we address this challenge using a case study: the gap gene network involved in segment determination during early development of Drosophila melanogaster. A major problem for reverse-engineering pattern-forming networks is the significant amount of time and effort required to acquire and quantify spatial gene expression data. We have developed a simplified data processing pipeline that considerably increases the throughput of the method, but results in data of reduced accuracy compared to those previously used for gap gene network inference. We demonstrate that we can infer the correct network structure using our reduced data set, and investigate minimal data requirements for successful reverse engineering. Our results show that timing and position of expression domain boundaries are the crucial features for determining regulatory network structure from data, while it is less important to precisely measure expression levels. Based on this, we define minimal data requirements for gap gene network inference. Our results demonstrate the feasibility of reverse-engineering with much reduced experimental effort. This enables more widespread use of the method in different developmental contexts and organisms. Such systematic application of data-driven models to real-world networks has enormous potential. Only the quantitative investigation of a large number of developmental gene regulatory networks will allow us to discover whether there are rules or regularities governing development and evolution of complex multi-cellular organisms. PMID:22807664

Checking Flight Rules with TraceContract: Application of a Scala DSL for Trace Analysis

NASA Technical Reports Server (NTRS)

Barringer, Howard; Havelund, Klaus; Morris, Robert A.

2011-01-01

Typically during the design and development of a NASA space mission, rules and constraints are identified to help reduce reasons for failure during operations. These flight rules are usually captured in a set of indexed tables, containing rule descriptions, rationales for the rules, and other information. Flight rules can be part of manual operations procedures carried out by humans. However, they can also be automated, and either implemented as on-board monitors, or as ground based monitors that are part of a ground data system. In the case of automated flight rules, one considerable expense to be addressed for any mission is the extensive process by which system engineers express flight rules in prose, software developers translate these requirements into code, and then both experts verify that the resulting application is correct. This paper explores the potential benefits of using an internal Scala DSL for general trace analysis, named TRACECONTRACT, to write executable specifications of flight rules. TRACECONTRACT can generally be applied to analysis of for example log files or for monitoring executing systems online.

Lessons from Jurassic Park: patients as complex adaptive systems.

PubMed

Katerndahl, David A

2009-08-01

With realization that non-linearity is generally the rule rather than the exception in nature, viewing patients and families as complex adaptive systems may lead to a better understanding of health and illness. Doctors who successfully practise the 'art' of medicine may recognize non-linear principles at work without having the jargon needed to label them. Complex adaptive systems are systems composed of multiple components that display complexity and adaptation to input. These systems consist of self-organized components, which display complex dynamics, ranging from simple periodicity to chaotic and random patterns showing trends over time. Understanding the non-linear dynamics of phenomena both internal and external to our patients can (1) improve our definition of 'health'; (2) improve our understanding of patients, disease and the systems in which they converge; (3) be applied to future monitoring systems; and (4) be used to possibly engineer change. Such a non-linear view of the world is quite congruent with the generalist perspective.

Querying phenotype-genotype relationships on patient datasets using semantic web technology: the example of cerebrotendinous xanthomatosis

PubMed Central

2012-01-01

Background Semantic Web technology can considerably catalyze translational genetics and genomics research in medicine, where the interchange of information between basic research and clinical levels becomes crucial. This exchange involves mapping abstract phenotype descriptions from research resources, such as knowledge databases and catalogs, to unstructured datasets produced through experimental methods and clinical practice. This is especially true for the construction of mutation databases. This paper presents a way of harmonizing abstract phenotype descriptions with patient data from clinical practice, and querying this dataset about relationships between phenotypes and genetic variants, at different levels of abstraction. Methods Due to the current availability of ontological and terminological resources that have already reached some consensus in biomedicine, a reuse-based ontology engineering approach was followed. The proposed approach uses the Ontology Web Language (OWL) to represent the phenotype ontology and the patient model, the Semantic Web Rule Language (SWRL) to bridge the gap between phenotype descriptions and clinical data, and the Semantic Query Web Rule Language (SQWRL) to query relevant phenotype-genotype bidirectional relationships. The work tests the use of semantic web technology in the biomedical research domain named cerebrotendinous xanthomatosis (CTX), using a real dataset and ontologies. Results A framework to query relevant phenotype-genotype bidirectional relationships is provided. Phenotype descriptions and patient data were harmonized by defining 28 Horn-like rules in terms of the OWL concepts. In total, 24 patterns of SWQRL queries were designed following the initial list of competency questions. As the approach is based on OWL, the semantic of the framework adapts the standard logical model of an open world assumption. Conclusions This work demonstrates how semantic web technologies can be used to support flexible representation and computational inference mechanisms required to query patient datasets at different levels of abstraction. The open world assumption is especially good for describing only partially known phenotype-genotype relationships, in a way that is easily extensible. In future, this type of approach could offer researchers a valuable resource to infer new data from patient data for statistical analysis in translational research. In conclusion, phenotype description formalization and mapping to clinical data are two key elements for interchanging knowledge between basic and clinical research. PMID:22849591

The James Webb Space Telescope RealWorld-InWorld Design Challenge: Involving Professionals in a Virtual Classroom

NASA Astrophysics Data System (ADS)

Masetti, Margaret; Bowers, S.

2011-01-01

Students around the country are becoming experts on the James Webb Space Telescope by designing solutions to two of the design challenges presented by this complex mission. RealWorld-InWorld has two parts; the first (the Real World portion) has high-school students working face to face in their classroom as engineers and scientists. The InWorld phase starts December 15, 2010 as interested teachers and their teams of high school students register to move their work into a 3D multi-user virtual world environment. At the start of this phase, college students from all over the country choose a registered team to lead InWorld. Each InWorld team is also assigned an engineer or scientist mentor. In this virtual world setting, each team refines their design solutions and creates a 3D model of the Webb telescope. InWorld teams will use 21st century tools to collaborate and build in the virtual world environment. Each team will learn, not only from their own team members, but will have the opportunity to interact with James Webb Space Telescope researchers through the virtual world setting, which allows for synchronous interactions. Halfway through the challenge, design solutions will be critiqued and a mystery problem will be introduced for each team. The top five teams will be invited to present their work during a synchronous Education Forum April 14, 2011. The top team will earn scholarships and technology. This is an excellent opportunity for professionals in both astronomy and associated engineering disciplines to become involved with a unique educational program. Besides the chance to mentor a group of interested students, there are many opportunities to interact with the students as a guest, via chats and presentations.

Chemical Engineering in Education and Industry.

ERIC Educational Resources Information Center

Wei, James

1986-01-01

Provides an historical overview of the origins, developments, and contributions of chemical engineering. Reviews the roles of the university and industry in the education of chemical engineers. Includes a listing of the major advances of chemical engineering since World War II. (ML)

Community detection in complex networks by using membrane algorithm

NASA Astrophysics Data System (ADS)

Liu, Chuang; Fan, Linan; Liu, Zhou; Dai, Xiang; Xu, Jiamei; Chang, Baoren

Community detection in complex networks is a key problem of network analysis. In this paper, a new membrane algorithm is proposed to solve the community detection in complex networks. The proposed algorithm is based on membrane systems, which consists of objects, reaction rules, and a membrane structure. Each object represents a candidate partition of a complex network, and the quality of objects is evaluated according to network modularity. The reaction rules include evolutionary rules and communication rules. Evolutionary rules are responsible for improving the quality of objects, which employ the differential evolutionary algorithm to evolve objects. Communication rules implement the information exchanged among membranes. Finally, the proposed algorithm is evaluated on synthetic, real-world networks with real partitions known and the large-scaled networks with real partitions unknown. The experimental results indicate the superior performance of the proposed algorithm in comparison with other experimental algorithms.

Process Materialization Using Templates and Rules to Design Flexible Process Models

NASA Astrophysics Data System (ADS)

Kumar, Akhil; Yao, Wen

The main idea in this paper is to show how flexible processes can be designed by combining generic process templates and business rules. We instantiate a process by applying rules to specific case data, and running a materialization algorithm. The customized process instance is then executed in an existing workflow engine. We present an architecture and also give an algorithm for process materialization. The rules are written in a logic-based language like Prolog. Our focus is on capturing deeper process knowledge and achieving a holistic approach to robust process design that encompasses control flow, resources and data, as well as makes it easier to accommodate changes to business policy.

The Engineer and the Societal Dilemma: An Interdisciplinary Approach.

ERIC Educational Resources Information Center

Coleman, Robert J.

The University of North Carolina's Electrical Engineering Department developed and delivered a course for undergraduate engineering students. The course integrated technical, social, and ethical perspectives on problems and issues faced in the world of practicing engineers. It achieved this integration by making use of professors in engineering,…

A Probabilistic Ontology Development Methodology

DTIC Science & Technology

2014-06-01

Test, and Evaluation; Acquisition; and Planning and Marketing ," in Handbook of Systems Engineering and Management .: John Wiley & Sons, 2009, pp...Intelligence and knowledge management . However, many real world problems in these disciplines are burdened by incomplete information and other sources...knowledge engineering, Artificial Intelligence and knowledge management . However, many real world problems in these disciplines are burdened by

America's Pressing Challenge - Building a Stronger Foundation. A Companion to Science and Engineering Indicators - 2006. NSB-06-02

ERIC Educational Resources Information Center

National Science Foundation, 2006

2006-01-01

This document identifies priorities for ensuring a world-class education in science, technology, engineering, and mathematics (STEM) fields for all Americans. America's competitive edge in this "flat world," its strength and versatility, all depend on an educational system capable of producing young people and productive citizens who are well…

Thermal Expansion Behavior of Hot-Pressed Engineered Matrices

NASA Technical Reports Server (NTRS)

Raj, S. V.

2016-01-01

Advanced engineered matrix composites (EMCs) require that the coefficient of thermal expansion (CTE) of the engineered matrix (EM) matches those of the fiber reinforcements as closely as possible in order to reduce thermal compatibility strains during heating and cooling of the composites. The present paper proposes a general concept for designing suitable matrices for long fiber reinforced composites using a rule of mixtures (ROM) approach to minimize the global differences in the thermal expansion mismatches between the fibers and the engineered matrix. Proof-of-concept studies were conducted to demonstrate the validity of the concept.

The Development of a Graphical User Interface Engine for the Convenient Use of the HL7 Version 2.x Interface Engine

PubMed Central

Kim, Hwa Sun; Cho, Hune

2011-01-01

Objectives The Health Level Seven Interface Engine (HL7 IE), developed by Kyungpook National University, has been employed in health information systems, however users without a background in programming have reported difficulties in using it. Therefore, we developed a graphical user interface (GUI) engine to make the use of the HL7 IE more convenient. Methods The GUI engine was directly connected with the HL7 IE to handle the HL7 version 2.x messages. Furthermore, the information exchange rules (called the mapping data), represented by a conceptual graph in the GUI engine, were transformed into program objects that were made available to the HL7 IE; the mapping data were stored as binary files for reuse. The usefulness of the GUI engine was examined through information exchange tests between an HL7 version 2.x message and a health information database system. Results Users could easily create HL7 version 2.x messages by creating a conceptual graph through the GUI engine without requiring assistance from programmers. In addition, time could be saved when creating new information exchange rules by reusing the stored mapping data. Conclusions The GUI engine was not able to incorporate information types (e.g., extensible markup language, XML) other than the HL7 version 2.x messages and the database, because it was designed exclusively for the HL7 IE protocol. However, in future work, by including additional parsers to manage XML-based information such as Continuity of Care Documents (CCD) and Continuity of Care Records (CCR), we plan to ensure that the GUI engine will be more widely accessible for the health field. PMID:22259723

The Development of a Graphical User Interface Engine for the Convenient Use of the HL7 Version 2.x Interface Engine.

PubMed

Kim, Hwa Sun; Cho, Hune; Lee, In Keun

2011-12-01

The Health Level Seven Interface Engine (HL7 IE), developed by Kyungpook National University, has been employed in health information systems, however users without a background in programming have reported difficulties in using it. Therefore, we developed a graphical user interface (GUI) engine to make the use of the HL7 IE more convenient. The GUI engine was directly connected with the HL7 IE to handle the HL7 version 2.x messages. Furthermore, the information exchange rules (called the mapping data), represented by a conceptual graph in the GUI engine, were transformed into program objects that were made available to the HL7 IE; the mapping data were stored as binary files for reuse. The usefulness of the GUI engine was examined through information exchange tests between an HL7 version 2.x message and a health information database system. Users could easily create HL7 version 2.x messages by creating a conceptual graph through the GUI engine without requiring assistance from programmers. In addition, time could be saved when creating new information exchange rules by reusing the stored mapping data. The GUI engine was not able to incorporate information types (e.g., extensible markup language, XML) other than the HL7 version 2.x messages and the database, because it was designed exclusively for the HL7 IE protocol. However, in future work, by including additional parsers to manage XML-based information such as Continuity of Care Documents (CCD) and Continuity of Care Records (CCR), we plan to ensure that the GUI engine will be more widely accessible for the health field.

System diagnostic builder

NASA Technical Reports Server (NTRS)

Nieten, Joseph L.; Burke, Roger

1992-01-01

The System Diagnostic Builder (SDB) is an automated software verification and validation tool using state-of-the-art Artificial Intelligence (AI) technologies. The SDB is used extensively by project BURKE at NASA-JSC as one component of a software re-engineering toolkit. The SDB is applicable to any government or commercial organization which performs verification and validation tasks. The SDB has an X-window interface, which allows the user to 'train' a set of rules for use in a rule-based evaluator. The interface has a window that allows the user to plot up to five data parameters (attributes) at a time. Using these plots and a mouse, the user can identify and classify a particular behavior of the subject software. Once the user has identified the general behavior patterns of the software, he can train a set of rules to represent his knowledge of that behavior. The training process builds rules and fuzzy sets to use in the evaluator. The fuzzy sets classify those data points not clearly identified as a particular classification. Once an initial set of rules is trained, each additional data set given to the SDB will be used by a machine learning mechanism to refine the rules and fuzzy sets. This is a passive process and, therefore, it does not require any additional operator time. The evaluation component of the SDB can be used to validate a single software system using some number of different data sets, such as a simulator. Moreover, it can be used to validate software systems which have been re-engineered from one language and design methodology to a totally new implementation.

Public Resistance is Waste-Based and What to Do About That - 13412

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ford, Laurie

2013-07-01

'Nuclear Communicators' connect a highly advanced sci-tech world with the world of everyday living. One challenge is helping stakeholders fit together three Big Ideas: (1) the valuable nuclear energy resource, (2) nuclear energy's invisible mortal dangers and potential bad-guy threats, and (3) critical scientific and engineering knowledge that is far over the heads of average (grade 8) USA reading levels. This article provides an overview of what does - and does not - work in our public communications. What does not work: 1. Going off topic. Address what concerns people most: how to manage nuclear wastes. 2. Underestimating public intelligence.more » What works: 1. Doing your homework on community history regarding nuclear materials. 2. Having discussion forums and public meetings with special guests from industry, government, and local leaders. 3. Regular cycles of communication with community groups to build a long-term dialogue. Solutions to some communication challenges require handling four gaps and one jungle: 1. Facts gap - Honest information about waste disposition. 2. Time gap - The timelines associated with waste management include 300 years, 10,000 years, and 703.8 million years. How do we talk about this? 3. Money gap - Who pays for new waste management challenges and technologies? 4. Confidence gap - Link local options to regional, national, and global knowledge. 5. Decision jungle - How can we make waste management rules and infrastructure more logical and transparent? Public communication needs to be grounded in facts for people who want to be credible actors in the new nuclear world. (authors)« less

Trade Group Rules Against China in Rare Earths Dispute

NASA Astrophysics Data System (ADS)

Showstack, Randy

2014-04-01

The World Trade Organization (WTO) has ruled against China in a trade dispute over rare earth elements (REE) as well as tungsten and molybdenum, the group announced on 26 March. The European Union, Japan, and the United States brought trade cases against China in March 2012 concerning alleged unfair export restraints on the materials (see Eos, 93(13), 134-135, doi:10.1029/2012EO130002).

Knowledge-Based Motion Control of AN Intelligent Mobile Autonomous System

NASA Astrophysics Data System (ADS)

Isik, Can

An Intelligent Mobile Autonomous System (IMAS), which is equipped with vision and low level sensors to cope with unknown obstacles, is modeled as a hierarchy of path planning and motion control. This dissertation concentrates on the lower level of this hierarchy (Pilot) with a knowledge-based controller. The basis of a theory of knowledge-based controllers is established, using the example of the Pilot level motion control of IMAS. In this context, the knowledge-based controller with a linguistic world concept is shown to be adequate for the minimum time control of an autonomous mobile robot motion. The Pilot level motion control of IMAS is approached in the framework of production systems. The three major components of the knowledge-based control that are included here are the hierarchies of the database, the rule base and the rule evaluator. The database, which is the representation of the state of the world, is organized as a semantic network, using a concept of minimal admissible vocabulary. The hierarchy of rule base is derived from the analytical formulation of minimum-time control of IMAS motion. The procedure introduced for rule derivation, which is called analytical model verbalization, utilizes the concept of causalities to describe the system behavior. A realistic analytical system model is developed and the minimum-time motion control in an obstacle strewn environment is decomposed to a hierarchy of motion planning and control. The conditions for the validity of the hierarchical problem decomposition are established, and the consistency of operation is maintained by detecting the long term conflicting decisions of the levels of the hierarchy. The imprecision in the world description is modeled using the theory of fuzzy sets. The method developed for the choice of the rule that prescribes the minimum-time motion control among the redundant set of applicable rules is explained and the usage of fuzzy set operators is justified. Also included in the dissertation are the description of the computer simulation of Pilot within the hierarchy of IMAS control and the simulated experiments that demonstrate the theoretical work.

A Multidisciplinary Engineering Summer School in an Industrial Setting

ERIC Educational Resources Information Center

Larsen, Peter Gorm; Fernandes, Joao M.; Habel, Jacek; Lehrskov, Hanne; Vos, Richard J. C.; Wallington, Oliver; Zidek, Jan

2009-01-01

Most university-level engineering studies produce technically skilled engineers. However, typically students face several difficulties when working in multidisciplinary teams when they initiate their industrial careers. In a globalised world, it becomes increasingly important that engineers are capable of collaborating across disciplinary…

Opinion evolution based on cellular automata rules in small world networks

NASA Astrophysics Data System (ADS)

Shi, Xiao-Ming; Shi, Lun; Zhang, Jie-Fang

2010-03-01

In this paper, we apply cellular automata rules, which can be given by a truth table, to human memory. We design each memory as a tracking survey mode that keeps the most recent three opinions. Each cellular automata rule, as a personal mechanism, gives the final ruling in one time period based on the data stored in one's memory. The key focus of the paper is to research the evolution of people's attitudes to the same question. Based on a great deal of empirical observations from computer simulations, all the rules can be classified into 20 groups. We highlight the fact that the phenomenon shown by some rules belonging to the same group will be altered within several steps by other rules in different groups. It is truly amazing that, compared with the last hundreds of presidential voting in America, the eras of important events in America's history coincide with the simulation results obtained by our model.

Increase in the Accuracy of Calculating Length of Horizontal Cable SCS in Civil Engineering

NASA Astrophysics Data System (ADS)

Semenov, A.

2017-11-01

A modification of the method for calculating the horizontal cable consumption of SCS established at civil engineering facilities is proposed. The proposed procedure preserves the prototype simplicity and provides a 5 percent accuracy increase. The values of the achieved accuracy are justified, their compliance with the practice of real projects is proved. The method is brought to the level of the engineering algorithm and formalized in the form of 12/70 rule.

Reliability, Maintenance and Risk Assessment in Naval Architecture and Marine Engineering Education in the US.

ERIC Educational Resources Information Center

Inozu, Bahadir; Ayyub, Bilal A.

1999-01-01

Examines the current status of existing curricula, accreditation requirements, and new developments in Naval Architecture and Marine Engineering education in the United States. Discusses the emerging needs of the maritime industry in light of advances in information technology and movement toward risk-based, reliability-centered rule making in the…

76 FR 34737 - Collection of Information Under Review by Office of Management and Budget; OMB Control Numbers...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-14

... Approval and Records for Electrical Engineering Regulations--Title 46 CFR Subchapter J. The sixty-day... hours to 6,754 hours a year. 4. Title: Plan Approval and Records for Electrical Engineering Regulations.... Abstract: The information sought here is needed to ensure compliance with our rules on electrical...

78 FR 36135 - Heavy-Duty Engine and Vehicle, and Nonroad Technical Amendments

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-17

... derived CO 2 emission rates (ADCs). Air Conditioning (A/C) Leakage Provisions: The MY2017-2025 Light-Duty GHG and Fuel Economy Rule separated 40 CFR 86.1866 into four sections for clarity. The A/C leakage... to revise Sec. 1037.660 related to the automatic engine shutdown (AES) provisions. Sec. 1037.660(c...

77 FR 44429 - Airworthiness Directives; Various Aircraft Equipped With Rotax Aircraft Engines 912 A Series Engine

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-30

... not be fuel resistant, which could lead to detachment of particles from the fuel hose and cause..., if not corrected, could lead to detachment of particles from the fuel hose and irregularities in the... waiving notice and comment prior to adoption of this rule because detachment of particles from the fuel...

76 FR 25246 - Control of Emissions From New and In-Use Marine Compression-Ignition Engines and Vessels; CFR...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-04

... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 1042 Control of Emissions From New and In-Use Marine Compression- Ignition Engines and Vessels; CFR Correction Correction In rule document 2011-8794 appearing on pages 20550-20551 in the issue of Wednesday, April 13, 2011, make the following correction: Sec. 1042...

78 FR 50313 - Final Additional Airworthiness Design Standards: Night Visual Flight Rules (VFR) Under the...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-19

... aeroplanes, each power or thrust control must be designed so that if the control separates at the engine fuel... control toward lean or shut-off position. (b) Each manual engine mixture control must be designed so that... any generator; and (5) Each generator must have an overvoltage control designed and installed to...

76 FR 58155 - Defense Federal Acquisition Regulation Supplement; Construction and Architect-Engineer Services...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-20

... past performance for construction and Architect- Engineer services. On April 19, 2011, DoD published a... electronically collecting past performance data; there is no need to specify separate DoD forms to collect the... this rule other than the cost of internet access should small entities choose to comment on their past...

77 FR 2015 - Special Conditions: Pratt and Whitney Canada Model PW210S Turboshaft Engine

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-13

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 33 [Docket No. NE130; Special Conditions No. 33-008-SC] Special Conditions: Pratt and Whitney Canada Model PW210S Turboshaft Engine Correction In rule document 2011-14113 appearing on pages 33981-33982 in the issue of Friday, June...

Comparison of Design-Build to Design-Bid Build as a Project Delivery Method

DTIC Science & Technology

2001-12-01

Time growth is generally coupled with cost growth, and this rule holds true when looking at the cost growth on the DB and DBB projects and similarly...to Remember,” The Military Engineer, No. 609, pp. 25-26, January-February 2001. 4. Crammer , Mark, “Design-Build in the Corps of Engineers, A work

78 FR 33866 - Self-Regulatory Organizations; NYSE MKT LLC; Notice of Filing and Immediate Effectiveness of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-05

... Amending NYSE MKT Rule 980NY, To Remove Provisions Governing How the Complex Matching Engine Handles Electronic Complex Orders That Contain a Stock Leg May 30, 2013. Pursuant to Section 19(b)(1)\\1\\ of the... governing how the Complex Matching Engine (``CME'') handles Electronic Complex Orders that contain a stock...

Identifying Engineering Students' English Sentence Reading Comprehension Errors: Applying a Data Mining Technique

ERIC Educational Resources Information Center

Tsai, Yea-Ru; Ouyang, Chen-Sen; Chang, Yukon

2016-01-01

The purpose of this study is to propose a diagnostic approach to identify engineering students' English reading comprehension errors. Student data were collected during the process of reading texts of English for science and technology on a web-based cumulative sentence analysis system. For the analysis, the association-rule, data mining technique…

77 FR 42649 - Safety Zone: Sea World San Diego Fireworks, Mission Bay; San Diego, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-20

... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 [Docket Number USCG-2012-0497] RIN 1625-AA00 Safety Zone: Sea World San Diego Fireworks, Mission Bay; San Diego, CA AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Coast Guard is establishing a temporary safety zone on...

A composite phase diagram of structure H hydrates using Schreinemakers' geometric approach

USGS Publications Warehouse

Mehta, A.P.; Makogon, T.Y.; Burruss, R.C.; Wendlandt, R.F.; Sloan, E.D.

1996-01-01

A composite phase diagram is presented for Structure H (sH) clathrate hydrates. In this work, we derived the reactions occurring among the various phases along each four-phase (Ice/Liquid water, liquid hydrocarbon, vapor, and hydrate) equilibrium line. A powerful method (though seldom used in chemical engineering) for multicomponent equilibria developed by Schreinemakers is applied to determine the relative location of all quadruple (four-phase) lines emanating from three quintuple (five-phase) points. Experimental evidence validating the approximate phase diagram is also provided. The use of Schreinemakers' rules for the development of the phase diagram is novel for hydrates, but these rules may be extended to resolve the phase space of other more complex systems commonly encountered in chemical engineering.

[Thermodynamic principles and physiologic criteria for the use of heat engines to drive the ventricles of an artificial heart].

PubMed

Kiselev, Iu M; Mordashev, V M; Osipov, A P; Shumakov, V I

1990-01-01

The authors review the thermodynamic bases and physiological limitations of the applicability of thermal engines for driving artificial heart ventricles. Show that the thermodynamic characteristics of Stirling and Brighton cycles do not make it possible to effectively use cycle-based engines in the artificial heart. A steam engine operating in accordance with the Rankine cycle may be regarded as an optimum type engine for that purpose. Demonstrate that according to the rules of physiology, use should be made of a separate driving of artificial heart ventricles by two independently operating steam engines. Provide the characteristics of the Soviet artificial heart "MIKRON" acceptable for implantation into the orthotopic position.

System and method for responding to ground and flight system malfunctions

NASA Technical Reports Server (NTRS)

Anderson, Julie J. (Inventor); Fussell, Ronald M. (Inventor)

2010-01-01

A system for on-board anomaly resolution for a vehicle has a data repository. The data repository stores data related to different systems, subsystems, and components of the vehicle. The data stored is encoded in a tree-based structure. A query engine is coupled to the data repository. The query engine provides a user and automated interface and provides contextual query to the data repository. An inference engine is coupled to the query engine. The inference engine compares current anomaly data to contextual data stored in the data repository using inference rules. The inference engine generates a potential solution to the current anomaly by referencing the data stored in the data repository.

Learning-Centered Instruction of Engineering Graphics for Freshman Engineering Students

ERIC Educational Resources Information Center

Pucha, Raghuram V.; Utschig, Tristan T.

2012-01-01

Teaching "Engineering Graphics" to freshman engineering students poses challenges to instructors as well as to students. While the instructors are confronted with a lack of material / text book that covers the broad scope of the subject matter, the students struggle to correlate newly developed skills to real-world engineering design problems…

Mathematical and Scientific Foundations for an Integrative Engineering Curriculum.

ERIC Educational Resources Information Center

Carr, Robin; And Others

1995-01-01

Describes the Mathematical and Scientific Foundations of Engineering curriculum which emphasizes the mathematical and scientific concepts common to all engineering fields. Scientists and engineers together devised topics and experiments that emphasize the relevance of theory to real-world applications. Presents material efficiently while building…

MetaSEEk: a content-based metasearch engine for images

NASA Astrophysics Data System (ADS)

Beigi, Mandis; Benitez, Ana B.; Chang, Shih-Fu

1997-12-01

Search engines are the most powerful resources for finding information on the rapidly expanding World Wide Web (WWW). Finding the desired search engines and learning how to use them, however, can be very time consuming. The integration of such search tools enables the users to access information across the world in a transparent and efficient manner. These systems are called meta-search engines. The recent emergence of visual information retrieval (VIR) search engines on the web is leading to the same efficiency problem. This paper describes and evaluates MetaSEEk, a content-based meta-search engine used for finding images on the Web based on their visual information. MetaSEEk is designed to intelligently select and interface with multiple on-line image search engines by ranking their performance for different classes of user queries. User feedback is also integrated in the ranking refinement. We compare MetaSEEk with a base line version of meta-search engine, which does not use the past performance of the different search engines in recommending target search engines for future queries.

THE MAN MADE WORLD, A HIGH SCHOOL COURSE ON THE THEORIES AND TECHNIQUES WHICH CONTRIBUTE TO OUR TECHNOLOGICAL CIVILIZATION.

ERIC Educational Resources Information Center

Commission on Engineering Education, Washington, DC.

THIS STUDENTS' MANUAL FOR THE ENGINEERING CONCEPTS CURRICULUM PROJECT'S (ECCP) HIGH SCHOOL COURSE, "THE MAN MADE WORLD," IS THE THIRD DRAFT OF THE EXPERIMENTAL VERSION. THE MATERIAL WRITTEN BY SCIENTISTS, ENGINEERS, AND EDUCATORS, EMPHASIZES THE THEORIES AND TECHNIQUES WHICH CONTRIBUTE TO OUR TECHNOLOGICAL CIVILIZATION. RESOURCES OF THE MAN-MADE…

Using a business rule management system to improve disposition of traumatized patients.

PubMed

Neuhaus, Philipp; Noack, Oliver; Majchrzak, Tim; Uckert, Frank

2010-01-01

We propose a business rule management system that is used to optimize the dispatchment on a mass casualty incident. Using geospatial information from available ambulances and rescue helicopters, a business rule engine calculates an optimized transportation plan for injured persons. It automatically considers special needs like ambulances equipped for baby transportation or special decontamination equipment, e.g. to deal with an accident in a chemical factory. The rules used in the system are not hardcoded; thus, it is possible to redefine them on the fly without changing the program's source code. It is possible to load and save a rule set in case of a catastrophe. Furthermore, it is possible to automatically recalculate an already planned operation if it becomes clear that the rescue vehicles assigned are needed by a person with life-threatening injuries.

Intertransaction Class Association Rule Mining Based on Genetic Network Programming and Its Application to Stock Market Prediction

NASA Astrophysics Data System (ADS)

Yang, Yuchen; Mabu, Shingo; Shimada, Kaoru; Hirasawa, Kotaro

Intertransaction association rules have been reported to be useful in many fields such as stock market prediction, but still there are not so many efficient methods to dig them out from large data sets. Furthermore, how to use and measure these more complex rules should be considered carefully. In this paper, we propose a new intertransaction class association rule mining method based on Genetic Network Programming (GNP), which has the ability to overcome some shortages of Apriori-like based intertransaction association methods. Moreover, a general classifier model for intertransaction rules is also introduced. In experiments on the real world application of stock market prediction, the method shows its efficiency and ability to obtain good results and can bring more benefits with a suitable classifier considering larger interval span.

A programmable rules engine to provide clinical decision support using HTML forms.

PubMed

Heusinkveld, J; Geissbuhler, A; Sheshelidze, D; Miller, R

1999-01-01

The authors have developed a simple method for specifying rules to be applied to information on HTML forms. This approach allows clinical experts, who lack the programming expertise needed to write CGI scripts, to construct and maintain domain-specific knowledge and ordering capabilities within WizOrder, the order-entry and decision support system used at Vanderbilt Hospital. The clinical knowledge base maintainers use HTML editors to create forms and spreadsheet programs for rule entry. A test environment has been developed which uses Netscape to display forms; the production environment displays forms using an embedded browser.

Ethical education in software engineering: responsibility in the production of complex systems.

PubMed

Génova, Gonzalo; González, M Rosario; Fraga, Anabel

2007-12-01

Among the various contemporary schools of moral thinking, consequence-based ethics, as opposed to rule-based, seems to have a good acceptance among professionals such as software engineers. But naïve consequentialism is intellectually too weak to serve as a practical guide in the profession. Besides, the complexity of software systems makes it very hard to know in advance the consequences that will derive from professional activities in the production of software. Therefore, following the spirit of well-known codes of ethics such as the ACM/IEEE's, we advocate for a more solid position in the ethical education of software engineers, which we call 'moderate deontologism', that takes into account both rules and consequences to assess the goodness of actions, and at the same time pays an adequate consideration to the absolute values of human dignity. In order to educate responsible professionals, however, this position should be complemented with a pedagogical approach to virtue ethics.

76 FR 50267 - Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-12

... Engineering, Rockwell Engineering, Excel Logistics, and American Food and Vending, Calhoun Spotting Services... Corporation, Conestoga Rovers and Associates, Phillips Engineering, Rockwell Engineering, Excel Logistics, and..., Excel Logistics, and American Food and Vending, Calhoun Spotting Service, and Job World, Inc. working on...

Benchmark Intelligent Agent Systems for Distributed Battle Tracking

DTIC Science & Technology

2008-06-20

services in the military and other domains, each entity in the benchmark system exposes a standard set of Web services. Jess ( Java Expert Shell...System) is a rule engine for the Java platform and is an interpreter for the Jess rule language. It is used here to implement policies that maintain...battle tracking system (DBTS), maintaining distributed situation awareness. The Java Agent DEvelopment (JADE) framework is a software framework

Calendar methods of fertility regulation: a rule of thumb.

PubMed

Colombo, B; Scarpa, B

1996-01-01

"[Many] illiterate women, particularly in the third world, find [it] difficult to apply usual calendar methods for the regulation of fertility. Some of them are even unable to make simple subtractions. In this paper we are therefore trying to evaluate the applicability and the efficiency of an extremely simple rule which entails only [the ability to count] a number of days, and always the same way." (SUMMARY IN ITA) excerpt

Collaboration pathway(s) using new tools for optimizing `operational' climate monitoring from space

NASA Astrophysics Data System (ADS)

Helmuth, Douglas B.; Selva, Daniel; Dwyer, Morgan M.

2015-09-01

Consistently collecting the earth's climate signatures remains a priority for world governments and international scientific organizations. Architecting a long term solution requires transforming scientific missions into an optimized robust `operational' constellation that addresses the collective needs of policy makers, scientific communities and global academic users for trusted data. The application of new tools offers pathways for global architecture collaboration. Recent rule-based expert system (RBES) optimization modeling of the intended NPOESS architecture becomes a surrogate for global operational climate monitoring architecture(s). These rulebased systems tools provide valuable insight for global climate architectures, by comparison/evaluation of alternatives and the sheer range of trade space explored. Optimization of climate monitoring architecture(s) for a partial list of ECV (essential climate variables) is explored and described in detail with dialogue on appropriate rule-based valuations. These optimization tool(s) suggest global collaboration advantages and elicit responses from the audience and climate science community. This paper will focus on recent research exploring joint requirement implications of the high profile NPOESS architecture and extends the research and tools to optimization for a climate centric case study. This reflects work from SPIE RS Conferences 2013 and 2014, abridged for simplification30, 32. First, the heavily securitized NPOESS architecture; inspired the recent research question - was Complexity (as a cost/risk factor) overlooked when considering the benefits of aggregating different missions into a single platform. Now years later a complete reversal; should agencies considering Disaggregation as the answer. We'll discuss what some academic research suggests. Second, using the GCOS requirements of earth climate observations via ECV (essential climate variables) many collected from space-based sensors; and accepting their definitions of global coverages intended to ensure the needs of major global and international organizations (UNFCCC and IPCC) are met as a core objective. Consider how new optimization tools like rule-based engines (RBES) offer alternative methods of evaluating collaborative architectures and constellations? What would the trade space of optimized operational climate monitoring architectures of ECV look like? Third, using the RBES tool kit (2014) demonstrate with application to a climate centric rule-based decision engine - optimizing architectural trades of earth observation satellite systems, allowing comparison(s) to existing architectures and gaining insights for global collaborative architectures. How difficult is it to pull together an optimized climate case study - utilizing for example 12 climate based instruments on multiple existing platforms and nominal handful of orbits; for best cost and performance benefits against the collection requirements of representative set of ECV. How much effort and resources would an organization expect to invest to realize these analysis and utility benefits?

Model-based Systems Engineering: Creation and Implementation of Model Validation Rules for MOS 2.0

NASA Technical Reports Server (NTRS)

Schmidt, Conrad K.

2013-01-01

Model-based Systems Engineering (MBSE) is an emerging modeling application that is used to enhance the system development process. MBSE allows for the centralization of project and system information that would otherwise be stored in extraneous locations, yielding better communication, expedited document generation and increased knowledge capture. Based on MBSE concepts and the employment of the Systems Modeling Language (SysML), extremely large and complex systems can be modeled from conceptual design through all system lifecycles. The Operations Revitalization Initiative (OpsRev) seeks to leverage MBSE to modernize the aging Advanced Multi-Mission Operations Systems (AMMOS) into the Mission Operations System 2.0 (MOS 2.0). The MOS 2.0 will be delivered in a series of conceptual and design models and documents built using the modeling tool MagicDraw. To ensure model completeness and cohesiveness, it is imperative that the MOS 2.0 models adhere to the specifications, patterns and profiles of the Mission Service Architecture Framework, thus leading to the use of validation rules. This paper outlines the process by which validation rules are identified, designed, implemented and tested. Ultimately, these rules provide the ability to maintain model correctness and synchronization in a simple, quick and effective manner, thus allowing the continuation of project and system progress.

World Trade Center Health Program; Amendments to Definitions, Appeals, and Other Requirements. Final rule.

PubMed

2016-12-15

In 2011 and 2012, the Secretary, Department of Health and Human Services (HHS), promulgated regulations designed to govern the World Trade Center (WTC) Health Program (Program), including the processes by which eligible responders and survivors may apply for enrollment in the Program, obtain health monitoring and treatment for WTC-related health conditions, and appeal enrollment and treatment decisions, as well as a process to add new conditions to the List of WTC-Related Health Conditions (List). After using the regulations for a number of years, the Administrator of the WTC Health Program identified potential improvements to certain existing provisions, including, but not limited to, appeals of enrollment, certification, and treatment decisions, as well as the procedures for the addition of health conditions for WTC Health Program coverage. He also identified the need to add new regulatory provisions, including, but not limited to, standards for the disenrollment of a WTC Health Program member and decertification of a certified WTC-related health condition. A notice of proposed rulemaking was published on August 17, 2016; this action addresses public comments received on that proposed rulemaking, as well as three interim final rules promulgated since 2011, and finalizes the proposed rule and three interim final rules.

Global Security Rule Sets An Analysis of the Current Global Security Environment and Rule Sets Governing Nuclear Weapons Release

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mollahan, K; Nattrass, L

America is in a unique position in its history. In maintaining its position as the world's only superpower, the US consistently finds itself taking on the role of a global cop, chief exporter of hard and soft power, and primary impetus for globalization. A view of the current global situation shows an America that can benefit greatly from the effects of globalization and soft power. Similarly, America's power can be reduced significantly if globalization and its soft power are not handled properly. At the same time, America has slowly come to realize that its next major adversary is not amore » near peer competitor but terrorism and disconnected nations that seek nuclear capabilities. In dealing with this new threat, America needs to come to terms with its own nuclear arsenal and build a security rule set that will establish for the world explicitly what actions will cause the US to consider nuclear weapons release. This rule set; however, needs to be established with sensitivity to the US's international interests in globalization and soft power. The US must find a way to establish its doctrine governing nuclear weapons release without threatening other peaceful nations in the process.« less

Borescope Inspection Management for Engine

NASA Astrophysics Data System (ADS)

Zhongda, Yuan

2018-03-01

In this paper, we try to explain the problems need to be improved from the two perspectives of maintenance program management and maintenance human risk control. On the basis of optimization analysis of borescope inspection maintenance scheme, the defect characteristics and expansion rules of engine heat terminal components are summarized, and some optimization measures are introduced. This paper analyses human risk problem of engine hole from the aspects of qualification management, training requirements and perfection of system, and puts forward some suggestions on management.

Incorporating global components into ethics education.

PubMed

Wang, George; Thompson, Russell G

2013-03-01

Ethics is central to science and engineering. Young engineers need to be grounded in how corporate social responsibility principles can be applied to engineering organizations to better serve the broader community. This is crucial in times of climate change and ecological challenges where the vulnerable can be impacted by engineering activities. Taking a global perspective in ethics education will help ensure that scientists and engineers can make a more substantial contribution to development throughout the world. This paper presents the importance of incorporating the global and cross culture components in the ethic education. The authors bring up a question to educators on ethics education in science and engineering in the globalized world, and its importance, necessity, and impendency. The paper presents several methods for discussion that can be used to identify the differences in ethics standards and practices in different countries; enhance the student's knowledge of ethics in a global arena.

The Gaze of the Perfect Search Engine: Google as an Infrastructure of Dataveillance

NASA Astrophysics Data System (ADS)

Zimmer, M.

Web search engines have emerged as a ubiquitous and vital tool for the successful navigation of the growing online informational sphere. The goal of the world's largest search engine, Google, is to "organize the world's information and make it universally accessible and useful" and to create the "perfect search engine" that provides only intuitive, personalized, and relevant results. While intended to enhance intellectual mobility in the online sphere, this chapter reveals that the quest for the perfect search engine requires the widespread monitoring and aggregation of a users' online personal and intellectual activities, threatening the values the perfect search engines were designed to sustain. It argues that these search-based infrastructures of dataveillance contribute to a rapidly emerging "soft cage" of everyday digital surveillance, where they, like other dataveillance technologies before them, contribute to the curtailing of individual freedom, affect users' sense of self, and present issues of deep discrimination and social justice.

Non-Markovian quantum feedback networks II: Controlled flows

NASA Astrophysics Data System (ADS)

Gough, John E.

2017-06-01

The concept of a controlled flow of a dynamical system, especially when the controlling process feeds information back about the system, is of central importance in control engineering. In this paper, we build on the ideas presented by Bouten and van Handel [Quantum Stochastics and Information: Statistics, Filtering and Control (World Scientific, 2008)] and develop a general theory of quantum feedback. We elucidate the relationship between the controlling processes, Z, and the measured processes, Y, and to this end we make a distinction between what we call the input picture and the output picture. We should note that the input-output relations for the noise fields have additional terms not present in the standard theory but that the relationship between the control processes and measured processes themselves is internally consistent—we do this for the two main cases of quadrature measurement and photon-counting measurement. The theory is general enough to include a modulating filter which post-processes the measurement readout Y before returning to the system. This opens up the prospect of applying very general engineering feedback control techniques to open quantum systems in a systematic manner, and we consider a number of specific modulating filter problems. Finally, we give a brief argument as to why most of the rules for making instantaneous feedback connections [J. Gough and M. R. James, Commun. Math. Phys. 287, 1109 (2009)] ought to apply for controlled dynamical networks as well.

Civil Engineering in Primary Schools

ERIC Educational Resources Information Center

Brown, Martin; Strong, Alan

2010-01-01

For many children of primary school age, an engineer is the man who comes to service the central heating system or who fixes the family car when it breaks down. Most have never met a "real" professional engineer, and have no idea of what is involved in the exciting world of engineering. Most assume that engineers are men. To try to…

Energy efficient engine flight propulsion system preliminary analysis and design report

NASA Technical Reports Server (NTRS)

Gardner, W. B.

1979-01-01

A flight propulsion system preliminary design was established that meets the program goals of at least a 12 percent reduction in thrust specific fuel consumption, at least a five percent reduction in direct operating cost, and one-half the performance deterioration rate of the most efficient current commercial engines. The engine provides a high probability of meeting the 1978 noise rule goal. Smoke and gaseous emissions defined by the EPA proposed standards for engines newly certified after 1 January 1981 are met with the exception of NOx, despite incorporation of all known NOx reduction technology.

"Human Nature": Chemical Engineering Students' Ideas about Human Relationships with the Natural World

ERIC Educational Resources Information Center

Goldman, Daphne; Assaraf, Orit Ben-Zvi; Shemesh, Julia

2014-01-01

While importance of environmental ethics, as a component of sustainable development, in preparing engineers is widely acknowledged, little research has addressed chemical engineers' environmental concerns. This study aimed to address this void by exploring chemical engineering students' values regarding human-nature relationships. The study was…

Approaches to Integrating Engineering in STEM Units and Student Achievement Gains

ERIC Educational Resources Information Center

Crotty, Elizabeth A.; Guzey, Selcen S.; Roehrig, Gillian H.; Glancy, Aran W.; Ring-Whalen, Elizabeth A.

2017-01-01

This study examined different approaches to integrating engineering practices in science, technology, engineering, and mathematics (STEM) curriculum units. These various approaches were correlated with student outcomes on engineering assessment items. There are numerous reform documents in the USA and around the world that emphasize the need to…

Establishing a "Centre for Engineering Experimentation and Design Simulation": A Step towards Restructuring Engineering Education in India

ERIC Educational Resources Information Center

Venkateswarlu, P.

2017-01-01

Reforms in undergraduate engineering curriculum to produce engineers with entrepreneurial skills should address real-world problems relevant to industry and society with active industry support. Technology-assisted, hands-on projects involving experimentation, design simulation and prototyping will transform graduates into professionals with…

Undergraduates | Argonne National Laboratory

Science.gov Websites

Directory Argonne National Laboratory Educational Programs Connecting today's world-class research to which you can use to change the world." -Nelson Mandela Undergrads are just beginning their journey into the world of science and engineering. Here at Argonne, we work to make the world a better place

An Examination of the Effects of Collaborative Scientific Visualization via Model-Based Reasoning on Science, Technology, Engineering, and Mathematics (STEM) Learning within an Immersive 3D World

ERIC Educational Resources Information Center

Soleimani, Ali

2013-01-01

Immersive 3D worlds can be designed to effectively engage students in peer-to-peer collaborative learning activities, supported by scientific visualization, to help with understanding complex concepts associated with learning science, technology, engineering, and mathematics (STEM). Previous research studies have shown STEM learning benefits…

The entropy reduction engine: Integrating planning, scheduling, and control

NASA Technical Reports Server (NTRS)

Drummond, Mark; Bresina, John L.; Kedar, Smadar T.

1991-01-01

The Entropy Reduction Engine, an architecture for the integration of planning, scheduling, and control, is described. The architecture is motivated, presented, and analyzed in terms of its different components; namely, problem reduction, temporal projection, and situated control rule execution. Experience with this architecture has motivated the recent integration of learning. The learning methods are described along with their impact on architecture performance.

76 FR 26620 - Control of Emissions From New and In-Use Marine Compression-Ignition Engines and Vessels; CFR...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-09

... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 1042 Control of Emissions From New and In-Use Marine Compression- Ignition Engines and Vessels; CFR Correction Correction In rule correction document C1-2011-8794 appearing on page 25246 in the issue of Wednesday, May 4, 2011, make the following correction: Sec. 1042.901...

75 FR 53264 - Restricted Area in Cape Fear River and Tributaries at Sunny Point Army Terminal, Brunswick County...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-31

... DEPARTMENT OF DEFENSE Department of the Army, Corps of Engineers 33 CFR Part 334 Restricted Area in Cape Fear River and Tributaries at Sunny Point Army Terminal, Brunswick County, NC AGENCY: U.S. Army Corps of Engineers, DoD. ACTION: Proposed rule. SUMMARY: The U.S. Army requested that the U.S...

75 FR 53197 - Restricted Area in Cape Fear River and Tributaries at Sunny Point Army Terminal, Brunswick County...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-31

... DEPARTMENT OF DEFENSE Department of the Army, Corps of Engineers 33 CFR Part 334 Restricted Area in Cape Fear River and Tributaries at Sunny Point Army Terminal, Brunswick County, NC AGENCY: U.S. Army Corps of Engineers, DoD. ACTION: Direct final rule. SUMMARY: The U.S. Army requested that the U.S...

77 FR 65823 - Control of Air Pollution From Aircraft and Aircraft Engines; Emission Standards and Test Procedures

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-31

... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Parts 87 [EPA-HQ-OAR-2010-0687; FRL-9678-1] RIN 2060-AO70 Control of Air Pollution From Aircraft and Aircraft Engines; Emission Standards and Test Procedures Correction In rule document 2012-13828 appearing on pages 36341-36386 in the issue of Monday, June 18, 2012...

RDA (Resource Description and Access): The New Way to Say, "AACR2"

ERIC Educational Resources Information Center

Adamich, Tom

2008-01-01

Every segment of life has its familiar products. In the food world, most people have heard of Kool-Aid, French's Mustard, and Coke. In the school library world, the Newbery Award, Scholastic, and AACR2 are well known nationwide. In this article, the author talks about AACR2, which stands for the Anglo-American Cataloging Rules, Second Edition. It…

The Tangled World of Teacher Debt: Clashing Rules and Uncertain Benefits for Federal Student-Loan Subsidies

ERIC Educational Resources Information Center

Delisle, Jason; Holt, Alexander

2017-01-01

The world of student loans and debt forgiveness for teachers is a patchwork of overlapping programs, contradictory regulations, and expensive subsidies that date back to Dwight D. Eisenhower's signing of the National Defense Education Act of 1958. The 60-year experiment in using federal loan dollars to encourage students to become teachers could…

Graphite Girls in a Gigabyte World: Managing the World Wide Web in 700 Square Feet

ERIC Educational Resources Information Center

Ogletree, Tamra; Saurino, Penelope; Johnson, Christie

2009-01-01

Our action research project examined the on-task and off-task behaviors of university-level student, use of wireless laptops in face-to-face classes in order to establish rules of wireless laptop etiquette in classroom settings. Participants in the case study of three university classrooms included undergraduate, graduate, and doctoral students.…

77 FR 76411 - Security Zone; 25th Annual North American International Auto Show, Detroit River, Detroit, MI

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-28

... provision authorizes an agency to issue a rule without prior notice and opportunity to comment when the... in the world for more than twenty-five years, and has been at the same location since 1965. In light... downtown Detroit, MI. The NAIAS is the prime venue for introducing the world's most anticipated vehicles...

Engineering of synthetic, stress-responsive yeast promoters

PubMed Central

Rajkumar, Arun S.; Liu, Guodong; Bergenholm, David; Arsovska, Dushica; Kristensen, Mette; Nielsen, Jens; Jensen, Michael K.; Keasling, Jay D.

2016-01-01

Advances in synthetic biology and our understanding of the rules of promoter architecture have led to the development of diverse synthetic constitutive and inducible promoters in eukaryotes and prokaryotes. However, the design of promoters inducible by specific endogenous or environmental conditions is still rarely undertaken. In this study, we engineered and characterized a set of strong, synthetic promoters for budding yeast Saccharomyces cerevisiae that are inducible under acidic conditions (pH ≤ 3). Using available expression and transcription factor binding data, literature on transcriptional regulation, and known rules of promoter architecture we improved the low-pH performance of the YGP1 promoter by modifying transcription factor binding sites in its upstream activation sequence. The engineering strategy outlined for the YGP1 promoter was subsequently applied to create a response to low pH in the unrelated CCW14 promoter. We applied our best promoter variants to low-pH fermentations, enabling ten-fold increased production of lactic acid compared to titres obtained with the commonly used, native TEF1 promoter. Our findings outline and validate a general strategy to iteratively design and engineer synthetic yeast promoters inducible to environmental conditions or stresses of interest. PMID:27325743

We don't need another hero.

PubMed

Badaracco, J L

2001-09-01

Everybody loves the stories of heroes like Martin Luther King, Jr., Mother Teresa, and Gandhi. But the heroic model of moral leadership usually doesn't work in the corporate world. Modesty and restraint are largely responsible for the achievements of the most effective moral leaders in business. The author, a specialist in business ethics, says the quiet leaders he has studied follow four basic rules in meeting ethical challenges and making decisions. The rules constitute an important resource for executives who want to encourage the development of such leaders among their middle managers. The first rule is "Put things off till tomorrow." The passage of time allows turbulent waters to calm and lets leaders' moral instincts emerge. "Pick your battles" means that quiet leaders don't waste political capital on fights they can't win; they save it for occasions when they really want to fight. "Bend the rules, don't break them" sounds easier than it is--bending the rules in order to resolve a complicated situation requires imagination, discipline, restraint, flexibility, and entrepreneurship. The fourth rule, "Find a compromise," reflects the author's finding that quiet leaders try not to see situations as polarized tests of ethical principles. These individuals work hard to craft compromises that are "good enough"--responsible and workable enough--to satisfy themselves, their companies, and their customers. The vast majority of difficult problems are solved through the consistent striving of people working far from the limelight. Their quiet approach to leadership doesn't inspire, thrill, or provide story lines for uplifting TV shows. But the unglamorous efforts of quiet leaders make a tremendous difference every day in the corporate world.

Engineering Students' Sustainability Approaches

ERIC Educational Resources Information Center

Haase, S.

2014-01-01

Sustainability issues are increasingly important in engineering work all over the world. This article explores systematic differences in self-assessed competencies, interests, importance, engagement and practices of newly enrolled engineering students in Denmark in relation to environmental and non-environmental sustainability issues. The…

Wright R–2600–8 Engine in the Engine Propeller Research Building

NASA Image and Video Library

1943-03-21

A Wright Aeronautical R–2600 Cyclone piston engine installed in the Engine Propeller Research Building, or Prop House, at the National Advisory Committee for Aeronautics (NACA) Aircraft Engine Research Laboratory. The R–2600 was among the most powerful engines that emerged during World War II. The engine, which was developed for commercial applications in 1939, was used to power the North American B–25 bomber and several other midsize military aircraft. The higher altitudes required by the military caused problems with the engine's cooling and fuel systems. The military requested that the Aircraft Engine Research Laboratory analyze the performance of the R–2600, improve its cooling system, and reduce engine knock. The NACA researchers subjected the engine to numerous tests in its Prop House. The R–2600 was the subject of the laboratory's first technical report, which was written by members of the Fuels and Lubricants Division. The Prop House contained soundproof test cells in which piston engines and propellers were mounted and operated at high powers. Electrically driven fans drew air through ducts to create a stream of cooling air over the engines. Researchers tested the performance of fuels, turbochargers, water-injection and cooling systems here during World War II. The facility was also investigated a captured German V–I buzz bomb during the war.

Identifying barriers to Science, Technology, Society and environment (STSE) educational goals and pedagogy in science education: A case study of UMASS Lowell undergraduate engineering

NASA Astrophysics Data System (ADS)

Phaneuf, Tiffany

The implementation of sustainable development in higher education is a global trend. Engineers, as gatekeepers of technological innovation, confront increasingly complex world issues ranging from economic and social to political and environmental. Recently, a multitude of government reports have argued that solving such complex problems requires changes in the pedagogy of engineering education, such as that prescribed by the Science, Technology, Society, and education (STS) movement that grew out of the environmental movement in the 70s. In STS students are engaged in the community by understanding that scientific progress is innately a sociopolitical process that involves dimensions of power, wealth and responsibility. United States accreditation criteria now demand "the broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context" (ABET Engineering Accreditation Commission 2005). With such emphasis on STS education as necessary to address complex world issues, it is vital to assess the barriers in the traditional engineering curriculum that may inhibit the success of such educational reform. This study identifies barriers to STS goals and pedagogy in post secondary science education by using the Francis College of Engineering at UMASS Lowell as a single case study. The study draws on existing literature to develop a theoretical framework for assessing four hypothesized barriers to STS education in undergraduate engineering. Identification of barriers to STS education in engineering generates a critical reflection of post secondary science education and its role in preparing engineers to be active citizens in shaping a rapidly globalizing world. The study offers policy recommendations for enabling post secondary science education to incorporate STS education into its curriculum.

Management Tools in Engineering Education.

ERIC Educational Resources Information Center

Fehr, M.

1999-01-01

Describes a teaching model that applies management tools such as delegation, total quality management, time management, teamwork, and Deming rules. Promotes the advantages of efficiency, reporting, independent scheduling, and quality. (SK)

Generalizing Gillespie’s Direct Method to Enable Network-Free Simulations

DOE PAGES

Suderman, Ryan T.; Mitra, Eshan David; Lin, Yen Ting; ...

2018-03-28

Gillespie’s direct method for stochastic simulation of chemical kinetics is a staple of computational systems biology research. However, the algorithm requires explicit enumeration of all reactions and all chemical species that may arise in the system. In many cases, this is not feasible due to the combinatorial explosion of reactions and species in biological networks. Rule-based modeling frameworks provide a way to exactly represent networks containing such combinatorial complexity, and generalizations of Gillespie’s direct method have been developed as simulation engines for rule-based modeling languages. Here, we provide both a high-level description of the algorithms underlying the simulation engines, termedmore » network-free simulation algorithms, and how they have been applied in systems biology research. We also define a generic rule-based modeling framework and describe a number of technical details required for adapting Gillespie’s direct method for network-free simulation. Lastly, we briefly discuss potential avenues for advancing network-free simulation and the role they continue to play in modeling dynamical systems in biology.« less

Analyzing privacy requirements: A case study of healthcare in Saudi Arabia.

PubMed

Ebad, Shouki A; Jaha, Emad S; Al-Qadhi, Mohammed A

2016-01-01

Developing legally compliant systems is a challenging software engineering problem, especially in systems that are governed by law, such as healthcare information systems. This challenge comes from the ambiguities and domain-specific definitions that are found in governmental rules. Therefore, there is a significant business need to automatically analyze privacy texts, extract rules and subsequently enforce them throughout the supply chain. The existing works that analyze health regulations use the U.S. Health Insurance Portability and Accountability Act as a case study. In this article, we applied the Breaux and Antón approach to the text of the Saudi Arabian healthcare privacy regulations; in Saudi Arabia, privacy is among the top dilemmas for public and private healthcare practitioners. As a result, we extracted and analyzed 2 rights, 4 obligations, 22 constraints, and 6 rules. Our analysis can assist requirements engineers, standards organizations, compliance officers and stakeholders by ensuring that their systems conform to Saudi policy. In addition, this article discusses the threats to the study validity and suggests open problems for future research.

Generalizing Gillespie’s Direct Method to Enable Network-Free Simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suderman, Ryan T.; Mitra, Eshan David; Lin, Yen Ting

Gillespie’s direct method for stochastic simulation of chemical kinetics is a staple of computational systems biology research. However, the algorithm requires explicit enumeration of all reactions and all chemical species that may arise in the system. In many cases, this is not feasible due to the combinatorial explosion of reactions and species in biological networks. Rule-based modeling frameworks provide a way to exactly represent networks containing such combinatorial complexity, and generalizations of Gillespie’s direct method have been developed as simulation engines for rule-based modeling languages. Here, we provide both a high-level description of the algorithms underlying the simulation engines, termedmore » network-free simulation algorithms, and how they have been applied in systems biology research. We also define a generic rule-based modeling framework and describe a number of technical details required for adapting Gillespie’s direct method for network-free simulation. Lastly, we briefly discuss potential avenues for advancing network-free simulation and the role they continue to play in modeling dynamical systems in biology.« less

Learning and disrupting invariance in visual recognition with a temporal association rule

PubMed Central

Isik, Leyla; Leibo, Joel Z.; Poggio, Tomaso

2012-01-01

Learning by temporal association rules such as Foldiak's trace rule is an attractive hypothesis that explains the development of invariance in visual recognition. Consistent with these rules, several recent experiments have shown that invariance can be broken at both the psychophysical and single cell levels. We show (1) that temporal association learning provides appropriate invariance in models of object recognition inspired by the visual cortex, (2) that we can replicate the “invariance disruption” experiments using these models with a temporal association learning rule to develop and maintain invariance, and (3) that despite dramatic single cell effects, a population of cells is very robust to these disruptions. We argue that these models account for the stability of perceptual invariance despite the underlying plasticity of the system, the variability of the visual world and expected noise in the biological mechanisms. PMID:22754523

Rule-based topology system for spatial databases to validate complex geographic datasets

NASA Astrophysics Data System (ADS)

Martinez-Llario, J.; Coll, E.; Núñez-Andrés, M.; Femenia-Ribera, C.

2017-06-01

A rule-based topology software system providing a highly flexible and fast procedure to enforce integrity in spatial relationships among datasets is presented. This improved topology rule system is built over the spatial extension Jaspa. Both projects are open source, freely available software developed by the corresponding author of this paper. Currently, there is no spatial DBMS that implements a rule-based topology engine (considering that the topology rules are designed and performed in the spatial backend). If the topology rules are applied in the frontend (as in many GIS desktop programs), ArcGIS is the most advanced solution. The system presented in this paper has several major advantages over the ArcGIS approach: it can be extended with new topology rules, it has a much wider set of rules, and it can mix feature attributes with topology rules as filters. In addition, the topology rule system can work with various DBMSs, including PostgreSQL, H2 or Oracle, and the logic is performed in the spatial backend. The proposed topology system allows users to check the complex spatial relationships among features (from one or several spatial layers) that require some complex cartographic datasets, such as the data specifications proposed by INSPIRE in Europe and the Land Administration Domain Model (LADM) for Cadastral data.

Counternarcotics Strategies: Effects on Afghanistan Hearts and Minds

DTIC Science & Technology

2010-03-16

the modem world, what little its remoteness may realize. The only period of peaceful centralized rule during its long history was during the rule of...encouraging the growth of pomegranates and of saffron rice as alternative crops that draw buyers outside of Afghanistan. ඌ The present strength of...that a careful and more sophisticated approach must be taken rather than a rush to reward those with criminal histories in light of misunderstood

Grooker, KartOO, Addict-o-Matic and More: Really Different Search Engines

ERIC Educational Resources Information Center

Descy, Don E.

2009-01-01

There are hundreds of unique search engines in the United States and thousands of unique search engines around the world. If people get into search engines designed just to search particular web sites, the number is in the hundreds of thousands. This article looks at: (1) clustering search engines, such as KartOO (www.kartoo.com) and Grokker…

Enabling Engineering Student Success: The Final Report for the Center for the Advancement of Engineering Education. CAEE-TR-10-02

ERIC Educational Resources Information Center

Atman, Cynthia J.; Sheppard, Sheri D.; Turns, Jennifer; Adams, Robin S.; Fleming, Lorraine N.; Stevens, Reed; Streveler, Ruth A.; Smith, Karl A.; Miller, Ronald L.; Leifer, Larry J.; Yasuhara, Ken; Lund, Dennis

2010-01-01

Today's engineering graduates will solve tomorrow's problems in a world that is advancing faster and facing more critical challenges than ever before. This situation creates significant demand for engineering education to evolve in order to effectively prepare a diverse community of engineers for these challenges. Such concerns have led to the…

Linking First-Year and Senior Engineering Design Teams: Engaging Early Academic Career Students in Engineering Design

ERIC Educational Resources Information Center

Fox, Garey A.; Weckler, Paul; Thomas, Dan

2015-01-01

In Biosystems Engineering at Oklahoma State University, senior design is a two semester course in which students work on real-world projects provided by clients. First-year (freshmen and trans­fer) students enroll in an introductory engineering course. Historically, these students worked on a team-based analysis project, and the engineering design…

Redesigning the Student Learning Approach through Personality Types and Pedagogies, A Case Study in an Undergraduate Engineering Course

ERIC Educational Resources Information Center

Fleischmann, Corinna; Nakagawa, Elizabeth; Kelley, Tyler

2016-01-01

As the National Science Foundation and engineers throughout the world seek to strengthen the future of the engineering profession, the Civil Engineering (CE) program at the United States Coast Guard Academy embodies this initiative with a student focused approach. One course in particular, Materials for Civil and Construction Engineers (CE…

Predicting Mycobacterium tuberculosis Complex Clades Using Knowledge-Based Bayesian Networks

PubMed Central

Bennett, Kristin P.

2014-01-01

We develop a novel approach for incorporating expert rules into Bayesian networks for classification of Mycobacterium tuberculosis complex (MTBC) clades. The proposed knowledge-based Bayesian network (KBBN) treats sets of expert rules as prior distributions on the classes. Unlike prior knowledge-based support vector machine approaches which require rules expressed as polyhedral sets, KBBN directly incorporates the rules without any modification. KBBN uses data to refine rule-based classifiers when the rule set is incomplete or ambiguous. We develop a predictive KBBN model for 69 MTBC clades found in the SITVIT international collection. We validate the approach using two testbeds that model knowledge of the MTBC obtained from two different experts and large DNA fingerprint databases to predict MTBC genetic clades and sublineages. These models represent strains of MTBC using high-throughput biomarkers called spacer oligonucleotide types (spoligotypes), since these are routinely gathered from MTBC isolates of tuberculosis (TB) patients. Results show that incorporating rules into problems can drastically increase classification accuracy if data alone are insufficient. The SITVIT KBBN is publicly available for use on the World Wide Web. PMID:24864238

Method for evaluating the reliability of compressor impeller of turbocharger for vehicle application in plateau area

NASA Astrophysics Data System (ADS)

Wang, Zheng; Wang, Zengquan; Wang, A.-na; Zhuang, Li; Wang, Jinwei

2016-10-01

As turbocharging diesel engines for vehicle application are applied in plateau area, the environmental adaptability of engines has drawn more attention. For the environmental adaptability problem of turbocharging diesel engines for vehicle application, the present studies almost focus on the optimization of performance match between turbocharger and engine, and the reliability problem of turbocharger is almost ignored. The reliability problem of compressor impeller of turbocharger for vehicle application when diesel engines operate in plateau area is studied. Firstly, the rule that the rotational speed of turbocharger changes with the altitude height is presented, and the potential failure modes of compressor impeller are analyzed. Then, the failure behavior models of compressor impeller are built, and the reliability models of compressor impeller operating in plateau area are developed. Finally, the rule that the reliability of compressor impeller changes with the altitude height is studied, the measurements for improving the reliability of the compressor impellers of turbocharger operating in plateau area are given. The results indicate that when the operating speed of diesel engine is certain, the rotational speed of turbocharger increases with the increase of altitude height, and the failure risk of compressor impeller with the failure modes of hub fatigue and blade resonance increases. The reliability of compressor impeller decreases with the increase of altitude height, and it also decreases as the increase of number of the mission profile cycle of engine. The method proposed can not only be used to evaluating the reliability of compressor impeller when diesel engines operate in plateau area but also be applied to direct the structural optimization of compressor impeller.

75 FR 22895 - Control of Emissions From New Marine Compression-Ignition Engines at or Above 30 Liters per Cylinder

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-30

...EPA is finalizing emission standards for new marine diesel engines with per-cylinder displacement at or above 30 liters (called Category 3 marine diesel engines) installed on U.S. vessels. These emission standards are equivalent to those adopted in the amendments to Annex VI to the International Convention for the Prevention of Pollution from Ships (MARPOL Annex VI). The emission standards apply in two stages--near-term standards for newly built engines will apply beginning in 2011; long-term standards requiring an 80 percent reduction in NOX emissions will begin in 2016. We are also finalizing a change to our diesel fuel program that will allow for the production and sale of 1,000 ppm sulfur fuel for use in Category 3 marine vessels. In addition, the new fuel requirements will generally forbid the production and sale of other fuels above 1,000 ppm sulfur for use in most U.S. waters, unless alternative devices, procedures, or compliance methods are used to achieve equivalent emissions reductions. We are adopting further provisions under the Act to Prevent Pollution from Ships, especially to apply the emission standards to engines covered by MARPOL Annex VI that are not covered by the Clean Air Act, and to require that these additional engines use the specified fuels (or equivalents). The final regulations also include technical amendments to our motor vehicle and nonroad engine regulations; many of these changes involve minor adjustments or corrections to our recently finalized rule for new nonroad spark-ignition engines, or adjustment to other regulatory provisions to align with this recent final rule.

40 CFR 49.124 - Rule for limiting visible emissions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... by any Federal, Tribal, State, or local government, and emissions from fuel combustion in mobile... vehicle, nonroad engine, nonroad vehicle, oil-fired boiler, opacity, open burning, particulate matter...

40 CFR 49.124 - Rule for limiting visible emissions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... by any Federal, Tribal, State, or local government, and emissions from fuel combustion in mobile... vehicle, nonroad engine, nonroad vehicle, oil-fired boiler, opacity, open burning, particulate matter...

40 CFR 49.129 - Rule for limiting emissions of sulfur dioxide.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., incinerator, marine vessel, mobile sources, motor vehicle, nonroad engine, nonroad vehicle, open burning, process source, reference method, refuse, residual fuel oil, solid fuel, stack, standard conditions...

40 CFR 49.129 - Rule for limiting emissions of sulfur dioxide.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., incinerator, marine vessel, mobile sources, motor vehicle, nonroad engine, nonroad vehicle, open burning, process source, reference method, refuse, residual fuel oil, solid fuel, stack, standard conditions...

Get a Grip! A Middle School Engineering Challenge

ERIC Educational Resources Information Center

Olds, Suzanne A.; Harrell, Deborah A.; Valente, Michael E.

2006-01-01

Investigating the field of engineering offers the opportunity for interdisciplinary, hands-on, inquiry-based units that integrate real-world applications. However, many K-12 students are not exposed to engineering until they enter college. Get a Grip! is a problem-based unit that places middle school students in the role of engineers who are…

"Science in Society, Omnibus Pack, Readers M-P."

ERIC Educational Resources Information Center

Association for Science Education, Cambridge (England).

Four additional readers have been written for use in the Science in Society general studies project. Three of the readers discuss the applications and importance of engineering in the world. They include: Engineering 1 (Reader M), which discusses such topics as the role of engineering in society, structural design and engineering, the engineering…

iSTEM: The Aerospace Engineering Challenge

ERIC Educational Resources Information Center

English, Lyn D.; King, Donna T.; Hudson, Peter; Dawes, Les

2014-01-01

The authors developed The Paper Plane Challenge as one of a three-part response to The Aerospace Engineering Challenge. The Aerospace Engineering Challenge was the second of three multi-part activities that they had developed with the teachers during the year. Their aim was to introduce students to the exciting world of engineering, where they…

Barriers to Student Success in Engineering Education

ERIC Educational Resources Information Center

Boles, Wageeh; Whelan, Karen

2017-01-01

In the UK, the USA and Australia, there have been calls for an increase in the number of engineering graduates to meet the needs of current global challenges. Universities around the world have been grappling with how to both attract more engineering students and to then retain them. Attrition from engineering programmes is disturbingly high. This…

Epistemology, Ontology and Ethics: "Galaxies Away from the Engineering World"?

ERIC Educational Resources Information Center

Christensen, Steen Hyldgaard; Erno-Kjolhede, Erik

2008-01-01

Philosophy of technology/philosophy of science has recently become part of the curriculum of engineering degree programmes in Denmark. However, to what extent do teachers of engineering see it as meaningful for students to work with relatively abstract philosophical concepts such as epistemology, ontology and ethics as part of engineering degree…

Identifying the Challenging Factors in the Transition from Colleges of Engineering to Employment

ERIC Educational Resources Information Center

Baytiyeh, Hoda; Naja, Mohamad

2012-01-01

The transition from university to a career in engineering is a challenging process. This study examined the perceptions of engineering graduates regarding the difficulties they encountered in their transition from the university to the workplace. Lebanese practising engineers (n=217), living around the world, were surveyed to identify their…

Educational Horsepower: Engine Design and Construction in the Classroom

ERIC Educational Resources Information Center

Christensen, Brad

2007-01-01

Engines, in their many forms and functions, have had a tremendous impact on society and the environment. It is hard for the contemporary student to fathom a world without trains, cars, trucks, powerboats, and airplanes. With the fascination, history, impacts, and importance of engines to modern society, it is only natural that engine technology…

Engineering education in the wake of hurricane Katrina

PubMed Central

Lima, Marybeth

2007-01-01

Living through hurricane Katrina and its aftermath and reflecting on these experiences from technical and non-technical standpoints has led me to reconsider my thoughts and philosophy on engineering education. I present three ideas regarding engineering education pedagogy that I believe will prepare future engineers for problem-solving in an increasingly complex world. They are (1) we must practice radical (to the root) engineering, (2) we must illustrate connections between engineering and public policy, and (3) we will join the charge to find sustainable solutions to problems. Ideas for bringing each of these concepts into engineering curricula through methods such as case study, practicing broad information gathering and data interpretation, and other methods inside and outside the classroom, are discussed. I believe that the consequences of not considering the root issues of problems to be solved, and of not including policy and sustainability considerations when problems to be solved are framed will lead our profession toward well meaning but insufficient utility. Hurricane Katrina convinced me that we must do better as educators to prepare our students for engineering for a sustainable world. PMID:18271988

CARSVM: a class association rule-based classification framework and its application to gene expression data.

PubMed

Kianmehr, Keivan; Alhajj, Reda

2008-09-01

In this study, we aim at building a classification framework, namely the CARSVM model, which integrates association rule mining and support vector machine (SVM). The goal is to benefit from advantages of both, the discriminative knowledge represented by class association rules and the classification power of the SVM algorithm, to construct an efficient and accurate classifier model that improves the interpretability problem of SVM as a traditional machine learning technique and overcomes the efficiency issues of associative classification algorithms. In our proposed framework: instead of using the original training set, a set of rule-based feature vectors, which are generated based on the discriminative ability of class association rules over the training samples, are presented to the learning component of the SVM algorithm. We show that rule-based feature vectors present a high-qualified source of discrimination knowledge that can impact substantially the prediction power of SVM and associative classification techniques. They provide users with more conveniences in terms of understandability and interpretability as well. We have used four datasets from UCI ML repository to evaluate the performance of the developed system in comparison with five well-known existing classification methods. Because of the importance and popularity of gene expression analysis as real world application of the classification model, we present an extension of CARSVM combined with feature selection to be applied to gene expression data. Then, we describe how this combination will provide biologists with an efficient and understandable classifier model. The reported test results and their biological interpretation demonstrate the applicability, efficiency and effectiveness of the proposed model. From the results, it can be concluded that a considerable increase in classification accuracy can be obtained when the rule-based feature vectors are integrated in the learning process of the SVM algorithm. In the context of applicability, according to the results obtained from gene expression analysis, we can conclude that the CARSVM system can be utilized in a variety of real world applications with some adjustments.

A programmable rules engine to provide clinical decision support using HTML forms.

PubMed Central

Heusinkveld, J.; Geissbuhler, A.; Sheshelidze, D.; Miller, R.

1999-01-01

The authors have developed a simple method for specifying rules to be applied to information on HTML forms. This approach allows clinical experts, who lack the programming expertise needed to write CGI scripts, to construct and maintain domain-specific knowledge and ordering capabilities within WizOrder, the order-entry and decision support system used at Vanderbilt Hospital. The clinical knowledge base maintainers use HTML editors to create forms and spreadsheet programs for rule entry. A test environment has been developed which uses Netscape to display forms; the production environment displays forms using an embedded browser. Images Figure 1 PMID:10566470

Correcting groove error in gratings ruled on a 500-mm ruling engine using interferometric control.

PubMed

Mi, Xiaotao; Yu, Haili; Yu, Hongzhu; Zhang, Shanwen; Li, Xiaotian; Yao, Xuefeng; Qi, Xiangdong; Bayinhedhig; Wan, Qiuhua

2017-07-20

Groove error is one of the most important factors affecting grating quality and spectral performance. To reduce groove error, we propose a new ruling-tool carriage system based on aerostatic guideways. We design a new blank carriage system with double piezoelectric actuators. We also propose a completely closed-loop servo-control system with a new optical measurement system that can control the position of the diamond relative to the blank. To evaluate our proposed methods, we produced several gratings, including an echelle grating with 79  grooves/mm, a grating with 768  grooves/mm, and a high-density grating with 6000  grooves/mm. The results show that our methods effectively reduce groove error in ruled gratings.

Canute Rules the Waves?: Hope for E-Library Tools Facing the Challenge of the "Google Generation"

ERIC Educational Resources Information Center

Myhill, Martin

2007-01-01

Purpose: To consider the findings of a recent e-resources survey at the University of Exeter Library in the context of the dominance of web search engines in academia, balanced by the development of e-library tools such as the library OPAC, OpenURL resolvers, metasearch engines, LDAP and proxy servers, and electronic resource management modules.…

Mystery of Foil Air Bearings for Oil-free Turbomachinery Unlocked: Load Capacity Rule-of-thumb Allows Simple Estimation of Performance

NASA Technical Reports Server (NTRS)

DellaCorte, Christopher; Valco, Mark J.

2002-01-01

The Oil-Free Turbomachinery team at the NASA Glenn Research Center has unlocked one of the mysteries surrounding foil air bearing performance. Foil air bearings are self-acting hydrodynamic bearings that use ambient air, or any fluid, as their lubricant. In operation, the motion of the shaft's surface drags fluid into the bearing by viscous action, creating a pressurized lubricant film. This lubricating film separates the stationary foil bearing surface from the moving shaft and supports load. Foil bearings have been around for decades and are widely employed in the air cycle machines used for cabin pressurization and cooling aboard commercial jetliners. The Oil-Free Turbomachinery team is fostering the maturation of this technology for integration into advanced Oil-Free aircraft engines. Elimination of the engine oil system can significantly reduce weight and cost and could enable revolutionary new engine designs. Foil bearings, however, have complex elastic support structures (spring packs) that make the prediction of bearing performance, such as load capacity, difficult if not impossible. Researchers at Glenn recently found a link between foil bearing design and load capacity performance. The results have led to a simple rule-of-thumb that relates a bearing's size, speed, and design to its load capacity. Early simple designs (Generation I) had simple elastic (spring) support elements, and performance was limited. More advanced bearings (Generation III) with elastic supports, in which the stiffness is varied locally to optimize gas film pressures, exhibit load capacities that are more than double those of the best previous designs. This is shown graphically in the figure. These more advanced bearings have enabled industry to introduce commercial Oil-Free gas-turbine-based electrical generators and are allowing the aeropropulsion industry to incorporate the technology into aircraft engines. The rule-of-thumb enables engine and bearing designers to easily size and select bearing technology for a new application and determine the level of complexity required in the bearings. This new understanding enables industry to assess the feasibility of new engine designs and provides critical guidance toward the future development of Oil-Free turbomachinery propulsion systems.

Generic comparison of protein inference engines.

PubMed

Claassen, Manfred; Reiter, Lukas; Hengartner, Michael O; Buhmann, Joachim M; Aebersold, Ruedi

2012-04-01

Protein identifications, instead of peptide-spectrum matches, constitute the biologically relevant result of shotgun proteomics studies. How to appropriately infer and report protein identifications has triggered a still ongoing debate. This debate has so far suffered from the lack of appropriate performance measures that allow us to objectively assess protein inference approaches. This study describes an intuitive, generic and yet formal performance measure and demonstrates how it enables experimentalists to select an optimal protein inference strategy for a given collection of fragment ion spectra. We applied the performance measure to systematically explore the benefit of excluding possibly unreliable protein identifications, such as single-hit wonders. Therefore, we defined a family of protein inference engines by extending a simple inference engine by thousands of pruning variants, each excluding a different specified set of possibly unreliable identifications. We benchmarked these protein inference engines on several data sets representing different proteomes and mass spectrometry platforms. Optimally performing inference engines retained all high confidence spectral evidence, without posterior exclusion of any type of protein identifications. Despite the diversity of studied data sets consistently supporting this rule, other data sets might behave differently. In order to ensure maximal reliable proteome coverage for data sets arising in other studies we advocate abstaining from rigid protein inference rules, such as exclusion of single-hit wonders, and instead consider several protein inference approaches and assess these with respect to the presented performance measure in the specific application context.

Physical Analytics: An emerging field with real-world applications and impact

NASA Astrophysics Data System (ADS)

Hamann, Hendrik

2015-03-01

In the past most information on the internet has been originated by humans or computers. However with the emergence of cyber-physical systems, vast amount of data is now being created by sensors from devices, machines etc digitizing the physical world. While cyber-physical systems are subject to active research around the world, the vast amount of actual data generated from the physical world has attracted so far little attention from the engineering and physics community. In this presentation we use examples to highlight the opportunities in this new subject of ``Physical Analytics'' for highly inter-disciplinary research (including physics, engineering and computer science), which aims understanding real-world physical systems by leveraging cyber-physical technologies. More specifically, the convergence of the physical world with the digital domain allows applying physical principles to everyday problems in a much more effective and informed way than what was possible in the past. Very much like traditional applied physics and engineering has made enormous advances and changed our lives by making detailed measurements to understand the physics of an engineered device, we can now apply the same rigor and principles to understand large-scale physical systems. In the talk we first present a set of ``configurable'' enabling technologies for Physical Analytics including ultralow power sensing and communication technologies, physical big data management technologies, numerical modeling for physical systems, machine learning based physical model blending, and physical analytics based automation and control. Then we discuss in detail several concrete applications of Physical Analytics ranging from energy management in buildings and data centers, environmental sensing and controls, precision agriculture to renewable energy forecasting and management.

At Age 100, Chemical Engineering Education Faces Changing World.

ERIC Educational Resources Information Center

Krieger, James

1988-01-01

Stresses the need for chemical engineering education to keep abreast of current needs. Explores the need for global economics, marketing strategy, product differentiation, and patent law in the curriculum. Questions the abilities of current chemical engineering graduate students in those areas. (MVL)

Forum on Proposed Revisions to ABET Engineering Accreditation Commission General Criteria on Student Outcomes and Curriculum (Criteria 3 and 5): A Workshop Summary

ERIC Educational Resources Information Center

Pool, Robert

2016-01-01

On February 16, 2016, the National Academy of Engineering held a forum to discuss proposed changes to criteria used by ABET (formerly the Accreditation Board for Engineering and Technology) to accredit engineering programs in colleges and universities around the world. The Forum on Proposed Revisions to ABET Engineering Accreditation Commission…

Summary of NACA Research on Afterburners for Turbojet Engines

NASA Technical Reports Server (NTRS)

Lundin, Bruce T; Gabriel, David S; Fleming, William A

1956-01-01

NACA research on afterburners for turbojet engines during the past 5 years is summarized. Although most of this work has been directed toward the development of specific afterburners for various engines rather than toward the accumulation of systematic data, it has, nevertheless, provided a large fund of experimental data and experience in the field. The references cited present over 1000 afterburner configurations and some 3500 hours of operation. In the treatment of the material of this summary, the principal effort has been to convey to the reader the "know-how" acquired by research engineers in the course of the work rather than to formulate a set of design rules.

Integrating Global Hydrology Into Graduate Engineering Education and Research

NASA Astrophysics Data System (ADS)

Griffis, V. W.

2007-12-01

Worldwide, polluted water affects the health of 1.2 billion people and contributes to the death of 15 million children under five every year. In addition poor environmental quality contributes to 25 per cent of all preventable ill health in the world. To address some of these problems, at the 2002 World Summit on Sustainable Development, the world community set the goal of halving, by the year 2015, the proportion of people without access to safe drinking water and basic sanitation. Solving sanitation and water resource management problems in any part of the world presents an interdisciplinary, complex challenge. However, when we attempt to solve these problems in an international context, our technical approaches must be tempered with cultural sensitivity and extraordinary management strategies. To meet this challenge, Michigan Tech has developed a unique global partnership with the U.S. Peace Corps to address our acknowledgement of the importance of placing engineering solutions in a global context. The program has graduated 30 students. Program enrollment is now over 30 and over 20 countries have hosted our students. The objective of this presentation is to demonstrate how this unique partnership can be integrated with graduate engineering education and research and also show how such a program may attract a more diverse student population into engineering. All graduate students enrolled in our Master's International Program in Civil and Environmental Engineering must complete specific coursework requirements before departing for their international experience. In CE5993 (Field Engineering in the Developing World) students learn to apply concepts of sustainable development and appropriate technology in the developing world. In FW5770 (Rural Community Development Planning and Analysis) students learn how one involves a community in the decision making process. A common theme in both courses is the role of woman in successful development projects. Technical specialization allows a student to take coursework in hydrology, water planning and management, and water quality engineering. The 2-3 semester residence on campus is then followed by three months of cultural, language, and technical training with the Peace Corps. After training students complete two years of service in the Peace Corps, typically working as a water/sanitation engineer while also completing a research project related to their Peace Corps experience. Some unique aspects of the Peace Corps experience is that it provides students with cultural awareness, language proficiency, community organizing skills, skills in consensus building and sustainable development, appreciation for technology that is economically and culturally sensitive, and a long-term field experience to develop an indepth overseas research project. Perhaps one of the greatest aspects of the Peace Corps experience is it provides students a basis to consider the social, economic, and environmental limitations of water projects in the developing world. Some examples of research projects that have been integrated into this program are: (a) culturally appropriate watershed planning and management, (b) technical capacity building of water supply systems, and (c) life cycle thinking approach applied to water and sanitation projects.

40 CFR 49.125 - Rule for limiting the emissions of particulate matter.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., gaseous fuel, heat input, incinerator, marine vessel, mobile sources, motor vehicle, nonroad engine..., residual fuel oil, solid fuel, stack, standard conditions, stationary source, uncombined water, used oil...

40 CFR 49.125 - Rule for limiting the emissions of particulate matter.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., gaseous fuel, heat input, incinerator, marine vessel, mobile sources, motor vehicle, nonroad engine..., residual fuel oil, solid fuel, stack, standard conditions, stationary source, uncombined water, used oil...

Ethics in biomedical engineering.

PubMed

Morsy, Ahmed; Flexman, Jennifer

2008-01-01

This session focuses on a number of aspects of the subject of Ethics in Biomedical Engineering. The session starts by providing a case study of a company that manufactures artificial heart valves where the valves were failing at an unexpected rate. The case study focuses on Biomedical Engineers working at the company and how their education and training did not prepare them to deal properly with such situation. The second part of the session highlights the need to learn about various ethics rules and policies regulating research involving human or animal subjects.

Discussion of solutions to ethical issues in real-world study.

PubMed

Wang, Sicheng; Liu, Baoyan; Xiong, Ningning; Xie, Qi; Zhang, Runshun; Zhou, Xuezhong; Qiao, Jie

2014-09-01

In recent years, the paradigm of real-world study (RWS) has been at the forefront of clinical research worldwide, particularly in the field of traditional Chinese medicine. In this paper, basic features and nature of real-world clinical studies are discussed, and ethical issues in different stages of RWS are raised and reviewed. Moreover, some preliminary solutions to these issues, such as protecting subjects during the process of RWS and performing ethical review, are presented based on recent practices and basic ethical rules to improve the scientific validity and ethical level of RWS.