Laser engravings as reason for mechanical failure of titanium-alloyed total hip stems.

PubMed

Kluess, Daniel; Steinhauser, Erwin; Joseph, Micheal; Koch, Ursula; Ellenrieder, Martin; Mittelmeier, Wolfram; Bader, Rainer

2015-07-01

Two revisions of broken β-titanium total hip stems had to be performed in our hospital after 2 and 4 years in situ. Since both fractures were located at the level of a laser engraving, a failure analysis was conducted. Both retrieved hip stems were disinfected and collected in our retrieval database after patient's signed agreement. Each fragment was macroscopically photographed. Fracture surfaces were analyzed using scanning electron microscopy (SEM). Quantification of element content was conducted using energy dispersive X-ray (EDX) analysis. Both stems show fatigue fracture, as displayed by the lines of rest on the fracture surface. The origin of fracture was identified directly at the laser engraving of the company logo at both stems by means of SEM. The EDX analysis showed an oxygen level beneath the laser engraving about twice as high as in the substrate, causing material embrittlement. Laser engravings need to be reduced to a minimum of necessary information, and should be placed at locations with minimum mechanical load. Biomechanical analyses are recommended to identify less loaded areas in implant components to avoid such implant failures.

[The celestial phenomena in A. Dürer's engraving Melancholia I].

PubMed

Weitzel, Hans

2009-01-01

The celestial body of Dürer's engraving Melencolia I is connected with his painting of a meteor, the Raveningham-painting; it is shown that the origin of this painting owns to the impact of the meteor of Ensisheim in 1492. Until now the celestial body, the balance, and the magic square are nearly consistently interpreted as the planet Saturn, the zodiac sign Libra, and the planet Jupiter, and the melancholy woman is subject to these heavenly bodies. Consequently, neoplatonic astrology has been the main focus of the engraving; including the rainbow, the engraving has also been interpreted biblically. The present paper, however, places emphasis on problems of the geometry as the reason of melancholy. Any astronomical meaning of the configuration of the numbers of the magic square is discarded.

Investigating the tool marks on oracle bones inscriptions from the Yinxu site (ca., 1319-1046 BC), Henan province, China.

PubMed

Zhao, Xiaolong; Tang, Jigen; Gu, Zhou; Shi, Jilong; Yang, Yimin; Wang, Changsui

2016-09-01

Oracle Bone Inscriptions in the Shang dynasty (1600-1046 BC) are the earliest well-developed writing forms of the Chinese character system, and their carving techniques have not been studied by tool marks analysis with microscopy. In this study, a digital microscope with three-dimensional surface reconstruction based on extended depth of focus technology was used to investigate tool marks on the surface of four pieces of oracle bones excavated at the eastern area of Huayuanzhuang, Yinxu site(ca., 1319-1046 BC), the last capital of the Shang dynasty, Henan province, China. The results show that there were two procedures to carve the characters on the analyzed tortoise shells. The first procedure was direct carving. The second was "outlining design," which means to engrave a formal character after engraving a draft with a pointed tool. Most of the strokes developed by an engraver do not overlap the smaller draft, which implies that the outlining design would be a sound way to avoid errors such as wrong and missing characters. The strokes of these characters have different shape at two ends and variations on width and depth of the grooves. Moreover, the bottom of the grooves is always rugged. Thus, the use of rotary wheel-cutting tools could be ruled out. In most cases, the starting points of the strokes are round or flat while the finishing points are always pointed. Moreover, the strokes should be engraved from top to bottom. When vertical or horizontal strokes had been engraved, the shell would be turned about 90 degrees to engrave the crossed strokes from top to bottom. There was no preferred order to engrave vertical or horizontal strokes. Since both sides of the grooves of the characters are neat and there exists no unorganized tool marks, then it is suggested that some sharp tools had been used for engraving characters on the shells. Microsc. Res. Tech. 79:827-832, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

An Upper Palaeolithic engraved human bone associated with ritualistic cannibalism

PubMed Central

Wallduck, Rosalind; Parfitt, Simon A.; Stringer, Chris B.

2017-01-01

Cut-marked and broken human bones are a recurrent feature of Magdalenian (~17–12,000 years BP, uncalibrated dates) European sites. Human remains at Gough’s Cave (UK) have been modified as part of a Magdalenian mortuary ritual that combined the intensive processing of entire corpses to extract edible tissues and the modification of skulls to produce skull-cups. A human radius from Gough’s Cave shows evidence of cut marks, percussion damage and human tooth marks, indicative of cannibalism, as well as a set of unusual zig-zagging incisions on the lateral side of the diaphysis. These latter incisions cannot be unambiguously associated with filleting of muscles. We compared the macro- and micro-morphological characteristics of these marks to over 300 filleting marks on human and non-human remains and to approximately 120 engraved incisions observed on two artefacts from Gough’s Cave. The new macro- and micro-morphometric analyses of the marks, as well as further comparisons with French Middle Magdalenian engraved artefacts, suggest that these modifications are the result of intentional engraving. The engraved motif comfortably fits within a Magdalenian pattern of design; what is exceptional in this case, however, is the choice of raw material (human bone) and the cannibalistic context in which it was produced. The sequence of the manipulations suggests that the engraving was a purposeful component of the cannibalistic practice, implying a complex ritualistic funerary behaviour that has never before been recognized for the Palaeolithic period. PMID:28792978

An Upper Palaeolithic engraved human bone associated with ritualistic cannibalism.

PubMed

Bello, Silvia M; Wallduck, Rosalind; Parfitt, Simon A; Stringer, Chris B

2017-01-01

Cut-marked and broken human bones are a recurrent feature of Magdalenian (~17-12,000 years BP, uncalibrated dates) European sites. Human remains at Gough's Cave (UK) have been modified as part of a Magdalenian mortuary ritual that combined the intensive processing of entire corpses to extract edible tissues and the modification of skulls to produce skull-cups. A human radius from Gough's Cave shows evidence of cut marks, percussion damage and human tooth marks, indicative of cannibalism, as well as a set of unusual zig-zagging incisions on the lateral side of the diaphysis. These latter incisions cannot be unambiguously associated with filleting of muscles. We compared the macro- and micro-morphological characteristics of these marks to over 300 filleting marks on human and non-human remains and to approximately 120 engraved incisions observed on two artefacts from Gough's Cave. The new macro- and micro-morphometric analyses of the marks, as well as further comparisons with French Middle Magdalenian engraved artefacts, suggest that these modifications are the result of intentional engraving. The engraved motif comfortably fits within a Magdalenian pattern of design; what is exceptional in this case, however, is the choice of raw material (human bone) and the cannibalistic context in which it was produced. The sequence of the manipulations suggests that the engraving was a purposeful component of the cannibalistic practice, implying a complex ritualistic funerary behaviour that has never before been recognized for the Palaeolithic period.

A rock engraving made by Neanderthals in Gibraltar.

PubMed

Rodríguez-Vidal, Joaquín; d'Errico, Francesco; Giles Pacheco, Francisco; Blasco, Ruth; Rosell, Jordi; Jennings, Richard P; Queffelec, Alain; Finlayson, Geraldine; Fa, Darren A; Gutiérrez López, José María; Carrión, José S; Negro, Juan José; Finlayson, Stewart; Cáceres, Luís M; Bernal, Marco A; Fernández Jiménez, Santiago; Finlayson, Clive

2014-09-16

The production of purposely made painted or engraved designs on cave walls--a means of recording and transmitting symbolic codes in a durable manner--is recognized as a major cognitive step in human evolution. Considered exclusive to modern humans, this behavior has been used to argue in favor of significant cognitive differences between our direct ancestors and contemporary archaic hominins, including the Neanderthals. Here we present the first known example of an abstract pattern engraved by Neanderthals, from Gorham's Cave in Gibraltar. It consists of a deeply impressed cross-hatching carved into the bedrock of the cave that has remained covered by an undisturbed archaeological level containing Mousterian artifacts made by Neanderthals and is older than 39 cal kyr BP. Geochemical analysis of the epigenetic coating over the engravings and experimental replication show that the engraving was made before accumulation of the archaeological layers, and that most of the lines composing the design were made by repeatedly and carefully passing a pointed lithic tool into the grooves, excluding the possibility of an unintentional or utilitarian origin (e.g., food or fur processing). This discovery demonstrates the capacity of the Neanderthals for abstract thought and expression through the use of geometric forms.

A rock engraving made by Neanderthals in Gibraltar

PubMed Central

Rodríguez-Vidal, Joaquín; d’Errico, Francesco; Pacheco, Francisco Giles; Blasco, Ruth; Rosell, Jordi; Jennings, Richard P.; Queffelec, Alain; Finlayson, Geraldine; Fa, Darren A.; Gutiérrez López, José María; Carrión, José S.; Negro, Juan José; Finlayson, Stewart; Cáceres, Luís M.; Bernal, Marco A.; Fernández Jiménez, Santiago; Finlayson, Clive

2014-01-01

The production of purposely made painted or engraved designs on cave walls—a means of recording and transmitting symbolic codes in a durable manner—is recognized as a major cognitive step in human evolution. Considered exclusive to modern humans, this behavior has been used to argue in favor of significant cognitive differences between our direct ancestors and contemporary archaic hominins, including the Neanderthals. Here we present the first known example of an abstract pattern engraved by Neanderthals, from Gorham’s Cave in Gibraltar. It consists of a deeply impressed cross-hatching carved into the bedrock of the cave that has remained covered by an undisturbed archaeological level containing Mousterian artifacts made by Neanderthals and is older than 39 cal kyr BP. Geochemical analysis of the epigenetic coating over the engravings and experimental replication show that the engraving was made before accumulation of the archaeological layers, and that most of the lines composing the design were made by repeatedly and carefully passing a pointed lithic tool into the grooves, excluding the possibility of an unintentional or utilitarian origin (e.g., food or fur processing). This discovery demonstrates the capacity of the Neanderthals for abstract thought and expression through the use of geometric forms. PMID:25197076

On the lost portrait of Galileo by the Tuscan painter Santi di Tito

NASA Astrophysics Data System (ADS)

Molaro, Paolo

2016-12-01

We study here the first established image of Galileo from the engraving made by Giuseppe Calendi at the end of the eighteenth century after a lost portrait of 1601 by Santi di Tito. We show that the engraving cannot be an exact copy, as it contains several inaccuracies which are unlikely to have been present in the original painting. A recent claim of the discovery of the painting by Santi di Tito is examined, and some reasons for suspecting it to be a forgery are outlined. As an alternative, we suggest a connection between the engraving and a portrait attributed to Tintoretto (which is currently in the collection of the Padua Civic Museum). The engraving and the Padua painting look quite different but can be traced to a common origin if we assume that Calendi added the half body, copied the painting onto copper plate directly, and adjusted the shading slightly. In this way, several features and details of the engraving find a plausible explanation. Finally, we note a remarkable similarity between the Padua portrait and a figure included in a Cologne painting by Rubens dating to about 1602-1604, which was suggested by Huemer to be Galileo.

5. Photocopy of circa 1870 engraving from Futhey and Cope's ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Photocopy of circa 1870 engraving from Futhey and Cope's History of Chester County, Pennsylvania, 1881, facing page 17 GENERAL VIEW SHOWING HOUSE WITH OUTBUILDINGS - Waynesborough, 2049 Waynesborough Road (Easttown Township), Paoli, Chester County, PA

3. Historic American Buildings Survey, PHOTOCOPY OF LOSSINGBARRITT ENGRAVING FROM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. Historic American Buildings Survey, PHOTOCOPY OF LOSSING-BARRITT ENGRAVING FROM CHARLES NORDHOFF'S COMMUNISTIC SOCIETIES OF THE UNITED STATES (1875), p. 130. - Shaker Church Family Seed House, Shaker Road, New Lebanon, Columbia County, NY

6. 1831 engraving by Fenner, Sears and Company, Philadelphia. After ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. 1831 engraving by Fenner, Sears and Company, Philadelphia. After drawing by Charles Burton (see HABS No. PA-1487-7); probably not published until circa 1840-45. - Walnut Street Theater, 829-833 Walnut Street, Philadelphia, Philadelphia County, PA

Correlative microscopy including CLSM and SEM to improve high-speed, high-resolution laser-engraved print and embossing forms

NASA Astrophysics Data System (ADS)

Bohrer, Markus; Schweitzer, Michael; Nirnberger, Robert; Weinberger, Bernhard

2015-10-01

The industrial market for processing large-scale films has seen dramatic changes since the 1980s and has almost completely been replaced by lasers and digital processes. A commonly used technology for engraving screens, print and embossing forms in the printing industry, well known since then, is the use of RF-excited CO2 lasers with a beam power up to about 1 kW, modulated in accordance to the pattern to be engraved. Future needs for high-security printing (banknotes, security papers, passports, etc.) will require laser engraving of at least half a million or even more structured elements with a depth from some μm up to 500 μm. Industry now wants photorealistic pictures in packaging design, which requires a similar performance. To ensure 'trusted pulses' from the digital process to the print result the use of correlative microscopy (CLSM and SEM) is demonstrated as a complete chain for a correlative print process in this paper.

39. PORTAL ELEVATION. Photocopy of engraving from illustrated pamphlet titled ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

39. PORTAL ELEVATION. Photocopy of engraving from illustrated pamphlet titled 'Wrought Iron Bridges Built by Wrought Iron Bridge Company,' Wrought Iron Bridge Company, Canton, Ohio, 1885 (artist unknown). - Emlenton Bridge, Spanning Allegheny River, Travel Route 38 (Legislative Route 75), Emlenton, Venango County, PA

A fast and low-cost microfabrication approach for six types of thermoplastic substrates with reduced feature size and minimized bulges using sacrificial layer assisted laser engraving.

PubMed

Gu, Longjun; Yu, Guodong; Li, Cheuk-Wing

2018-01-02

Since polydimethylsiloxane (PDMS) is notorious for its severe sorption to biological compounds and even nanoparticles, thermoplastics become a promising substrate for microdevices. Although CO 2 laser engraving is an efficient method for thermoplastic device fabrication, it accompanies with poor bonding issues due to severe bulging and large feature size determined by the diameter of laser beam. In this study, a low-cost microfabrication method is proposed by reversibly sealing a 1 mm thick polymethylmethacrylate (PMMA) over an engraving substrate to reduce channel feature size and minimize bulges of laser engraved channels. PMMA, polycarbonate (PC), polystyrene (PS), perfluoroalkoxy alkane (PFA), cyclic-olefin polymers (COP) and polylactic acid (PLA) were found compatible with this sacrificial layer assisted laser engraving technique. Microchannel width as small as ∼40 μm was attainable by a laser beam that was 5 times larger in diameter. Bulging height was significantly reduced to less 5 μm for most substrates, which facilitated leak proof device bonding without channel deformation. Microdevices with high aspect ratio channels were prepared to demonstrate the applicability of this microfabrication method. We believe this fast and low-cost fabrication approach for thermoplastics will be of interest to researchers who have encountered problem with polydimethylsiloxane based microdevices in their applications. Copyright © 2017 Elsevier B.V. All rights reserved.

5. Photocopy of engraving (from J.H.D. Wingfield, The Northern California ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Photocopy of engraving (from J.H.D. Wingfield, The Northern California Mission, ca. 1882, p. 3) Moss Eng. Co. N.Y. ca. 1882 SOUTH SIDE AND EAST FRONT - Bishop J. H. D. Wingfield House, 36 Wingfield Way, Benicia, Solano County, CA

78 FR 22604 - Privacy Act of 1974, as Amended; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-16

...: Chief-Office of Strategic Systems Management, Chief-Office of Quality, Chief-Office of Order Management & Delivery Systems, and Chief-Office of Portfolio & Project Management. Bureau of Engraving and Printing...; System of Records AGENCY: Bureau of Engraving and Printing, Treasury. ACTION: Notice of systems of...

Attractant semiochemicals of the engraver beetle, Ips perturbatus, in south-central and interior Alaska.

Treesearch

Edward H. Holsten; Roger E. Burnside; Steven J. Seybold

2000-01-01

From 1996 through 1999, field tests of various engraver beetle (Ips perturbatus (Eichhoff)) semiochemicals in funnel traps were conducted in south-central and interior Alaska in stands of Lutz (Picea xlutzii Little) and white spruce (P.glauca (Moench) Voss). The European spruce beetle (I....

Dispersal of the spruce beetle, Dendroctonus rufipennis, and the engraver beetle, Ips perturbatus, in Alaska.

Treesearch

Richard A. Werner; Edward H. Holsten

1997-01-01

Mark-release-recapture experiments were performed with spruce beetles (Dendroctonus rufipennis (Kirby)) and Ips engraver beetles (Ips perturbatus (Eichhoff)) to determine distance and direction of dispersal. The recapture rate of beetles marked with fluorescent powder was extremely low. Most I. perturbatus...

The Mediterranean pine engraver

Treesearch

Jana C. Lee; Sheri L. Smith; Steven J. Seybold

2005-01-01

In May 2004, a new exotic bark beetle for North America was discovered in baited flight traps in Fresno, California during an annual bark beetle and woodborer survey by the California Department of Food and Agriculture. This bark beetle was identified as Orthotomicus erosus (Wollaston), the Mediterranean pine engraver, a well-documented pest of...

1. Photocopy of engraving by D.C. Baxter (taken from page ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Photocopy of engraving by D.C. Baxter (taken from page 24 of the Philadelphia, Wilmington & Balltimore Railroad guide, Fitzgibbon and Van Ness, Philadelphia, 1856) GENERAL VIEW OF STATION (C.1856) - Philadelphia, Wilmington & Baltimore Railroad, President Street Station, President & Fleet Streets, Baltimore, Independent City, MD

19 CFR 134.43 - Methods of marking specific articles.

Code of Federal Regulations, 2014 CFR

2014-04-01

... origin by cutting, die-sinking, engraving, stamping, or some other permanent method. The indelible... metal or plastic tag indelibly marked with the country of origin and permanently attached to the article... crafts must be indelibly marked with the country of origin by means of cutting, die-sinking, engraving...

19 CFR 134.43 - Methods of marking specific articles.

Code of Federal Regulations, 2013 CFR

2013-04-01

... origin by cutting, die-sinking, engraving, stamping, or some other permanent method. The indelible... metal or plastic tag indelibly marked with the country of origin and permanently attached to the article... crafts must be indelibly marked with the country of origin by means of cutting, die-sinking, engraving...

4. Photocopy of an engraving (original in the collection of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. Photocopy of an engraving (original in the collection of the Claremont Historical Society) artist unknown, no date FIRST COAL CUTTER MANUFACTURED BY THE SULLIVAN MACHINERY COMPANY. THIS DEVICE WAS POWERED BY HAND. - Sullivan Machinery Company, Main Street between Pearl & Water Streets, Claremont, Sullivan County, NH

Biomimetic engineering of a generic cell-on-membrane architecture by microfluidic engraving for on-chip bioassays.

PubMed

Lee, Sang-Wook; Noh, Ji-Yoon; Park, Seung Chul; Chung, Jin-Ho; Lee, Byoungho; Lee, Sin-Doo

2012-05-22

We develop a biomimetic cell-on-membrane architecture in close-volume format which allows the interfacial biocompatibility and the reagent delivery capability for on-chip bioassays. The key concept lies in the microfluidic engraving of lipid membranes together with biological cells on a supported substrate with topographic patterns. The simultaneous engraving process of a different class of fluids is promoted by the front propagation of an air-water interface inside a flow-cell. This highly parallel, microfluidic cell-on-membrane approach opens a door to the natural biocompatibility in mimicking cellular stimuli-response behavior essential for diverse on-chip bioassays that can be precisely controlled in the spatial and temporal manner.

The "Illustrated" Souls of Black Folk

ERIC Educational Resources Information Center

Du Bois, W. E. B.

2004-01-01

Richly illustrated, this special edition of Du Bois's seminal work includes historical woodcuts and engravings, photos and documents. Most of the photos, engravings, and documents are from the 19th and early 20th century and depict American slavery and its legacy, African-American life, and the prominent figures and events associated with the…

49 CFR 383.153 - Information on the CLP and CDL documents and applications.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., digitized color image, or black and white laser engraved photograph of the driver. The State may issue a... to, contain a digital color image or photograph or black and white laser engraved photograph. (2) All... CMV carrying passengers, other than Federal/State auditors and inspectors, test examiners, other...

49 CFR 383.153 - Information on the CLP and CDL documents and applications.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., digitized color image, or black and white laser engraved photograph of the driver. The State may issue a... to, contain a digital color image or photograph or black and white laser engraved photograph. (2) All... CMV carrying passengers, other than Federal/State auditors and inspectors, test examiners, other...

29 CFR 779.368 - Printing and engraving establishments not recognized as retail.

Code of Federal Regulations, 2011 CFR

2011-07-01

... retail. 779.368 Section 779.368 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION... FAIR LABOR STANDARDS ACT AS APPLIED TO RETAILERS OF GOODS OR SERVICES Exemptions for Certain Retail or... recognized as retail. (a) An establishment which is engaged in printing and engraving is not recognized as a...

29 CFR 779.368 - Printing and engraving establishments not recognized as retail.

Code of Federal Regulations, 2012 CFR

2012-07-01

... retail. 779.368 Section 779.368 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION... FAIR LABOR STANDARDS ACT AS APPLIED TO RETAILERS OF GOODS OR SERVICES Exemptions for Certain Retail or... recognized as retail. (a) An establishment which is engaged in printing and engraving is not recognized as a...

29 CFR 779.368 - Printing and engraving establishments not recognized as retail.

Code of Federal Regulations, 2013 CFR

2013-07-01

... retail. 779.368 Section 779.368 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION... FAIR LABOR STANDARDS ACT AS APPLIED TO RETAILERS OF GOODS OR SERVICES Exemptions for Certain Retail or... recognized as retail. (a) An establishment which is engaged in printing and engraving is not recognized as a...

Restoration of obliterated engraved marks on steel surfaces by chemical etching reagent.

PubMed

Song, Qingfang

2015-05-01

Chemical etching technique is widely used for restoration of obliterated engraved marks on steel surface in the field of public security. The consumed thickness of steel surface during restoration process is considered as a major criterion for evaluating the efficiency of the chemical etching reagent. The thinner the consumed thickness, the higher the restoration efficiency. According to chemical principles, maintaining the continuous oxidative capabilities of etching reagents and increasing the kinetic rate difference of the reaction between the engraved and non-engraved area with the chemical etching reagent can effectively reduce the consumed steel thickness. The study employed steel surface from the engine case of motorcycle and the car frame of automobile. The chemical etching reagents are composed of nitric acid as the oxidizer, hydrofluoric acid as the coordination agent and mixed with glacial acetic acid or acetone as the solvents. Based on the performance evaluation of three different etching reagents, the one composed of HNO3, HF and acetone gave the best result. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Seasonal abundance, arrival and emergence patterns of predaceous hister beetles (Coleoptera: Histeridae) associated with Ips engraver beetles (Coleoptera: Scolytidae) in Louisiana

Treesearch

William P. Shepherd; Richard A. Goyer

2003-01-01

The most common predaceious hister beetles (Coleoptera: Histeridae) found associated with Ips engraver beetles (Coleoptera: Scolytidae) in southern Louisiana were Platysoma attenuata LeConte, P. cylindrica (Paykull), P. parallelum (Say), and Plegaderus transversus (Say). The seasonal abundance of...

13. Photocopy of engraving (from A. Witteman's Ohio Soldiers' and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. Photocopy of engraving (from A. Witteman's Ohio Soldiers' and Sailors' Home Near Sandusky, (New York: The Albertype Co.), 1894) VIEW EAST, COTTAGE 'L', (UPPER LEFT COTTAGE 'F', COTTAGE 'G'; UPPER RIGHT COTTAGE UNKNOWN) - Ohio Soldiers' & Sailors' Home, Cottage L, U.S. Route 250 at DeWitt Avenue, Sandusky, Erie County, OH

Assessing the significance of Palaeolithic engraved cortexes. A case study from the Mousterian site of Kiik-Koba, Crimea

PubMed Central

d’Errico, Francesco; Stepanchuk, Vadim

2018-01-01

Twenty-Seven Lower and Middle Paleolithic sites from Europe and the Middle East are reported in the literature to have yielded incised stones. At eleven of these sites incisions are present on flint cortexes. Even when it is possible to demonstrate that the engravings are ancient and human made, it is often difficult to distinguish incisions resulting from functional activities such as butchery or use as a cutting board, from those produced deliberately, and even more difficult to identify the scope of the latter. In this paper we present results of the analysis of an engraved cortical flint flake found at Kiik-Koba, a key Mousterian site from Crimea, and create an interpretative framework to guide the interpretation of incised cortexes. The frame of inference that we propose allows for a reasoned evaluation of the actions playing a role in the marking process and aims at narrowing down the interpretation of the evidence. The object comes from layer IV, the same layer in which a Neanderthal child burial was unearthed, which contains a para-Micoquian industry of Kiik-Koba type dated to between c.35 and 37 cal kyr BP. The microscopic analysis and 3D reconstruction of the grooves on the cortex of this small flint flake, demonstrate that the incisions represent a deliberate engraving made by a skilled craftsman, probably with two different points. The lines are nearly perfectly framed into the cortex, testifying of well controlled motions. This is especially the case considering the small size of the object, which makes this a difficult task. The production of the engraving required excellent neuromotor and volitional control, which implies focused attention. Evaluation of the Kiik-Koba evidence in the light of the proposed interpretative framework supports the view that the engraving was made with a representational intent. PMID:29718916

Assessing the significance of Palaeolithic engraved cortexes. A case study from the Mousterian site of Kiik-Koba, Crimea.

PubMed

Majkić, Ana; d'Errico, Francesco; Stepanchuk, Vadim

2018-01-01

Twenty-Seven Lower and Middle Paleolithic sites from Europe and the Middle East are reported in the literature to have yielded incised stones. At eleven of these sites incisions are present on flint cortexes. Even when it is possible to demonstrate that the engravings are ancient and human made, it is often difficult to distinguish incisions resulting from functional activities such as butchery or use as a cutting board, from those produced deliberately, and even more difficult to identify the scope of the latter. In this paper we present results of the analysis of an engraved cortical flint flake found at Kiik-Koba, a key Mousterian site from Crimea, and create an interpretative framework to guide the interpretation of incised cortexes. The frame of inference that we propose allows for a reasoned evaluation of the actions playing a role in the marking process and aims at narrowing down the interpretation of the evidence. The object comes from layer IV, the same layer in which a Neanderthal child burial was unearthed, which contains a para-Micoquian industry of Kiik-Koba type dated to between c.35 and 37 cal kyr BP. The microscopic analysis and 3D reconstruction of the grooves on the cortex of this small flint flake, demonstrate that the incisions represent a deliberate engraving made by a skilled craftsman, probably with two different points. The lines are nearly perfectly framed into the cortex, testifying of well controlled motions. This is especially the case considering the small size of the object, which makes this a difficult task. The production of the engraving required excellent neuromotor and volitional control, which implies focused attention. Evaluation of the Kiik-Koba evidence in the light of the proposed interpretative framework supports the view that the engraving was made with a representational intent.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aoki, K.; Fujii, N.; Kageyama, H.

Durability of selected hard materials as information preserving media has been studied, leading to some promising results. Several engraving experiments on the selected materials confirmed that characters and patterns can be expressed along with shading and gradation. Engraving experiments on durable artificial materials were carried out by applying laser technologies. By selecting appropriate materials and engraving methods, characters and patterns can be expressed along with shading and gradation. These technologies can be applied to not only documentary records but also to markers and monuments. Among the materials, silicon carbide, which has strong resistance against heat wear and chemical impacts, corrosionmore » resistance and wear resistance, showed satisfactory results in terms of accuracy. Thus, it is expected to be a promising material for the long-term record preservation. With respect to the density of characters in written records in the case of dot printing, it was estimated that, with 2-point characters, information totaling 6 to 8 pages of A-4 size can be engraved on a 10 cm x 10 cm plate. When a document that has 500 pages of A4 size paper is engraved on sintered silicon carbide plates, the total volume of recording media is evaluated as follows: - Size of plate: 10 cm x 10 cm; - Size of character to be engraved: 2-points ({approx} 0.7 mm; of readable size by naked eye or using a magnifying glass); - Number of pages of original document to be engraved on a plate: 8; - Number of pages of original document to be engraved on both sides of a plate: 16; - Number of plates needed for a series of document package: 500 / 16 = 32; - The thickness of a plate: 1 mm; - The total thickness of recording media: 32 mm; - Bulk of recording media preserving 500 pages of document: 10 cm x 10 cm x 32 cm. The examination has shown the possibility of long-term preservation of documentation records as a permanent system. A further examination is suggested concerning the assessment of the durability of the sintered silicon carbide plate against wear and chemical impacts. Preserving color pictures and photographs for a long-term duration is also proposed. In conclusion: We have proposed that the concept of a record preservation system is the combination of several different methods in order to impart redundancy to the communication function. The system should be robust that its overall function would not be influenced by partial damage, and also be flexible enough to adapt to the changes of background conditions in the future. Records and information should be preserved by way of both Relay System and Permanent System. The former would maintain record preservation and communication functions in the framework of social systems whereas the latter would consist of durable storehouse facilities, recording media and markers/monuments and be independent of any social systems and human control. Silicon carbide is one of the most promising materials for the Permanent System of Records Preservation. It is expected to be the potential candidate for long-term recording media with its superior characteristics of resistance against heat, wear and chemical impacts, and of engraving accuracy. (authors)« less

Inter- and Intrapopulation Variation of the Pheromone, Ipsdienol Produced by Male Pine Engravers Ips pini (Say) (Coleoptera: Scolytidae)

Treesearch

D.R. Miller; J.H. Borden; K.N. Slessor

1989-01-01

We determined the chirality of ipsdienol in individual male pine engravers, Ips pini (Say), from New York, California, and two localities in British Columbia (BC). Both quantity and chirality of ipsdienol varied significantly between and within populations of I. pini . Beetles from California and southeastern BC produced...

Enantiospecific Pheromone Production and Response Profiles for Populations of Pine Engraver, Ips pini (SAY) (Coleoptera: Scolytidae), in British Columbia

Treesearch

D.R. Miller; J.H. Borden; K.N. Slessor

1996-01-01

Analyses of the enantiomeric composition of ipsdienol produced by individual male pine engravers, Ips pini (Say), from six populations in British Columbia, support the hypothesis that New York and Idaho races of this species hybridize in southeastern British Columbia. Production profiles, expressed as frequency distributions of (+):(-) ipsdienol...

Synomones of two sympatric species deter attack by the pine engraver, Ips pini (Coleoptera: Scolytidae)

Treesearch

John H. Borde; D.R. Delvin; Dan R. Miller

1991-01-01

The capture of pine engravers, Ips pini (Say), in ipdienol-baited, multiple-funnel traps in British Columbia was significantly reduced when devices releasing ipsenol or verbenone were placed in the traps. These results suggest that ipsenol and verbenone are synomones release by Ips latidens (LeC.) and the mountain pine beetle,

Weather and tree growth associated with white fir mortality caused by fir engraver and roundheaded fir borer

Treesearch

George T. Ferrell; Ralph C. Hall

1975-01-01

White fir (Abides concolor [Cord. & Glend.] Lindl.) stands in Western North America periodically suffer extensive tree mortality caused by outbreaks of the fir engraver bark beetle (Scolytus ventralis Lec.). The cambial zone of the boles infested by S. ventralis is also colonized by the roundheaded fir borer...

29 CFR 779.368 - Printing and engraving establishments not recognized as retail.

Code of Federal Regulations, 2014 CFR

2014-07-01

... employees who operate the machines in the printing or engraving department and there may be other employees... establishments these workers spend relatively little time in the work of the printing department. As an... amount of his time (20 percent or less) is allocable to the clerical, messenger, or custodial work of the...

8. Historic American Buildings Survey PHOTOCOPY OF ENGRAVING OF NOVITIATE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. Historic American Buildings Survey PHOTOCOPY OF ENGRAVING OF NOVITIATE ORDER, POLAND HILL. FROM HISTORY OF CUMBERLAND COUNTY, MAINE (PHILADELPHIA: EVERTS AND PECK, 1880), FACING PAGE 328 - Sabbathday Lake Shaker Community Meetinghouse, West of State Route 26, South of North Raymond Road, northwest edge of church family area, Sabbathday Lake Village, Cumberland County, ME

Factors influencing northern spruce engraver colonization of white spruce slash in interior Alaska

Treesearch

Christopher J. Fettig; Roger E. Burnside; Chistopher J. Hayes; James J. Kruse; Nicholas J. Lisuzzo; Stephen R. McKelvey; Sylvia R. Mori; Stephen K. Nickel; Mark E. Schultz

2013-01-01

In interior Alaska, increased use of mechanical fuel reduction treatments, increased interests in the use of wood energy systems as alternatives to fossil fuels, and elevated populations of northern spruce engraver, Ips perturbatus (Eichhoff), have raised concerns regarding the impact of this bark beetle to forest resources. We conducted a large-...

Evaluation of insecticides for protecting southwestern ponderosa pines from attack by engraver beetles (Coleoptera: Curculionidae: Scolytinae)

Treesearch

Tom E. DeGomez; Christopher J. Hayes; John A. Anhold; Joel D. McMillin; Karen M. Clancy; Paul P. Bosu

2006-01-01

Insecticides that might protect pine trees from attack by engraver beetles (Ips spp.) have not been rigorously tested in the southwestern United States. We conducted two field experiments to evaluate the efficacy of several currently and potentially labeled preventative insecticides for protecting high-value ponderosa pine, Pinus ponderosa...

E-Myrcenol: A New Pheromone for the Pine Engraver, Ips Pini (Say) (Coleoptera: Scolytidae)

Treesearch

D.R. Miller; G. Gries; J.H. Borden

1990-01-01

E-Myrcenol reduced catches of the pine engraver, Ips pini (Say), to ipsdienol-baited, multiple-funnel traps in a dose-dependent fashion. The sex ratio was unaffected by E-myrcenol treatments. Lures containing E-myrcenol in ethanol solution failed to protect freshly cut logs of lodgepole pine from attack by

Design of a Sensor System for On-Line Monitoring of Contact Pressure in Chalcographic Printing.

PubMed

Jiménez, José Antonio; Meca, Francisco Javier; Santiso, Enrique; Martín, Pedro

2017-09-05

Chalcographic printer is the name given to a specific type of press which is used to transfer the printing of a metal-based engraved plate onto paper. The printing system consists of two rollers for pressing and carrying a metal plate onto which an engraved inked plate is placed. When the driving mechanism is operated, the pressure exerted by the rollers, also called contact pressure, allows the engraved image to be transferred into paper, thereby obtaining the final image. With the aim of ensuring the quality of the result, in terms of good and even transfer of ink, the contact pressure must be uniform. Nowadays, the strategies utilized to measure the pressure are implemented off-line, i.e., when the press machines are shut down for maintenance, which poses limitations. This paper proposes a novel sensor system aimed at monitoring the pressure exerted by the rollers on the engraved plate while chalcographic printer is operating, i.e., on-line. The purpose is two-fold: firstly, real-time monitoring reduces the number of breakdown repairs required, reduces machine downtime and reduces the number of low-quality engravings, which increases productivity and revenues; and secondly, the on-line monitoring and register of the process parameters allows the printing process to be reproducible even with changes in the environmental conditions or other factors such as the wear of the parts that constitute the mechanical system and a change in the dimensions of the printing materials. The proposed system consists of a strain gauge-based load cell and conditioning electronics to sense and treat the signals.

Design of a Sensor System for On-Line Monitoring of Contact Pressure in Chalcographic Printing

PubMed Central

Jiménez, José Antonio; Meca, Francisco Javier; Santiso, Enrique; Martín, Pedro

2017-01-01

Chalcographic printer is the name given to a specific type of press which is used to transfer the printing of a metal-based engraved plate onto paper. The printing system consists of two rollers for pressing and carrying a metal plate onto which an engraved inked plate is placed. When the driving mechanism is operated, the pressure exerted by the rollers, also called contact pressure, allows the engraved image to be transferred into paper, thereby obtaining the final image. With the aim of ensuring the quality of the result, in terms of good and even transfer of ink, the contact pressure must be uniform. Nowadays, the strategies utilized to measure the pressure are implemented off-line, i.e., when the press machines are shut down for maintenance, which poses limitations. This paper proposes a novel sensor system aimed at monitoring the pressure exerted by the rollers on the engraved plate while chalcographic printer is operating, i.e., on-line. The purpose is two-fold: firstly, real-time monitoring reduces the number of breakdown repairs required, reduces machine downtime and reduces the number of low-quality engravings, which increases productivity and revenues; and secondly, the on-line monitoring and register of the process parameters allows the printing process to be reproducible even with changes in the environmental conditions or other factors such as the wear of the parts that constitute the mechanical system and a change in the dimensions of the printing materials. The proposed system consists of a strain gauge-based load cell and conditioning electronics to sense and treat the signals. PMID:28872583

The influence of silhouette color and orientation on arrival and emergence of Ips pine engravers and their predators in loblolly pine

Treesearch

R.A. Goyer; G.J. Lenhard; Brian L. Strom

2004-01-01

Insects that rely upon aggressive bark beetles (Coleoptera: Scolytidae) for generating appropriate habitats (natural enemies and associated species) must respond to a variety of stimuli used by bark beetles, including semiochemical and visual cues. In the southeastern US, Ips engraver beetles are non-aggressive bark beetles that exploit both standing...

Pine Engraver, Ips pini, in the Western United States (FIDL)

Treesearch

Sandra J. Kegley; R. Ladd Livingston; Kenneth E. Gibson

1997-01-01

The pine engraver, Ips pini (Say), is one of the most common and widely distributed bark beetles in North America. It occurs from southern Appalachia north to Maine and Quebec, westward across the northern United States and Canada, into the interior of Alaska, throughout the Pacific Coast States and the Rocky Mountain region, to northern Mexico. In the western United...

Using indicator plants to assess susceptibility of Californian red fir and white fir to the fir engraver beetle

Treesearch

George T. Ferrell

1986-01-01

Using a Vegetation Drought Index (VDI) for estimating the susceptibility of California red and white firs to the fir engraver beetle (Scolytus venttralis) was evaluated in northern California forests where these true firs (Abies species) occur in mixed conifer and true fir stands. Midway through the summer drought, true fir...

Attractants for longhorn beetles in the southeastern U.S. - pine volatiles and engraver pheromones

Treesearch

Daniel R. Miller; Chris Asaro; Christopher M. Crowe; James R. Meeker; Donald A. Duerr

2011-01-01

Our objective was to determine the effect of adding the binary combination of pine engraver pheromones, ipsenol and ipsdienol, to the binary combination of pine volatiles, ethanol and (–)-α-pinene, on catches of some common pine longhorn beetles (Cerambycidae) in the southeastern U.S. Six trapping experiments were conducted in stands of mature pine in...

Aspects of CO2 laser engraving of printing cylinders.

PubMed

Atanasov, P A; Maeno, K; Manolov, V P

1999-03-20

Results of the experimental and theoretical investigations of CO(2) laser-engraved cylinders are presented. The processed surfaces of test samples are examined by a phase-stepping laser interferometer, digital microscope, and computer-controlled profilometer. Fourier analysis is made on the patterns parallel to the axis of the laser-scribed test ceramic cylinders. The problem of the visually observed banding is discussed.

Weather, logging, and tree growth associated with fir engraver attack scars in white fir

Treesearch

George T. Ferrell

1973-01-01

The boles of 32 recently killed, and 41 living, white fir were examined for embedded fir engraver (Scolytus ventralis) attack scars. Of 287 scars found in annual rings for the years 1934-69, only 2 to 3 percent represented reproductively successful attacks. Trends in scar abundance were directly correlated with trends in white fir killed by ...

Walking response of the Mediterranean pine engraver, Orthotomicus erosus, to novel plant odors host in a laboratory olfactometer

Treesearch

A. J. Walter; R. C. Venette; S. A. Kells; S. J. Seybold

2010-01-01

When an herbivorous insect enters a new geographic area, it will select host plants based on short and long distance cues. A conifer-feeding bark beetle that has been recently introduced to North America, the Mediterranean pine engraver, Orthotomicus erosus (Wollaston), has a potentially wide host range, especially among members of the Pinaceae....

Differential susceptibility of white fir provenances to the fir engraver and its fungal symbiont in northern California

Treesearch

G.T. Ferrell; W.J. Otrosina

1996-01-01

The fir engraver, Scolytus ventralis LeC., attacks white fir, Abies concolor (Gord. and Glend.) Lindl., and other true firs, Abies spp., in western North America. The biology, attack behavior, and ecology of this bark beetle were recently summarized by Berryman and Ferrell (1988). During the summer flight season, the attacking beetles bore into the cambial zone of...

Stand and tree characteristics influencing density of fir engraver beetle attack scars in white fir

Treesearch

George T. Ferrell

1973-01-01

Density of embedded scars resulting from old fir engraver (Scolytus ventralis Lec.) attacks was assessed in 3,430 bole cross sections cut from 603 white firs growing in both cutover and in virgin old-growth stands in northern California. Mean scar density was directly related to percentage of mature stand removed by logging and was higher in...

A Unique Assemblage of Engraved Plaquettes from Ein Qashish South, Jezreel Valley, Israel: Figurative and Non-Figurative Symbols of Late Pleistocene Hunters-Gatherers in the Levant.

PubMed

Yaroshevich, Alla; Bar-Yosef, Ofer; Boaretto, Elisabeta; Caracuta, Valentina; Greenbaum, Noam; Porat, Naomi; Roskin, Joel

2016-01-01

Three engraved limestone plaquettes from the recently excavated Epipaleolithic open-air site Ein Qashish South in the Jezreel Valley, Israel comprise unique evidence for symbolic behavior of Late Pleistocene foragers in the Levant. The engravings, uncovered in Kebaran and Geometric Kebaran deposits (ca. 23ka and ca. 16.5ka BP), include the image of a bird-the first figurative representation known so far from a pre-Natufian Epipaleolithic-along with geometric motifs such as chevrons, crosshatchings and ladders. Some of the engravings closely resemble roughly contemporary European finds interpreted as "systems of notations" or "artificial memory systems"-records related to timing of seasonal resources and associated aggregation events of nomadic groups. Moreover, similarly looking signs and patterns are well known from the context of the local Natufian-a final Epipaleolithic culture of sedentary or semi-sedentary foragers who started practicing agriculture. The investigation of the engravings found in Ein Qashish South involves conceptualizations developed in studies of European and local parallels, a selection of ethnographic examples and preliminary microscopic observations of the plaquettes. This shows that the figurative and non-figurative images comprise a coherent assemblage of symbols that might have been applied in order to store, share and transmit information related to social and subsistence realms of mobile bands. It further suggests that the site functioned as a locality of groups' aggregation and indicates social complexity of pre-Natufian foragers in the Levant. While alterations in social and subsistence strategies can explain the varying frequency of image use characterizing different areas of the Late Pleistocene world-the apparent similarity in graphics and the mode of their application support the possibility that symbol-mediated behavior has a common and much earlier origin.

Predicting susceptibility of white fir during a drought-associated outbreak of the fir engraver, Scolytus centralis, in California

Treesearch

G.T. Ferrell; W.J. Otrosina; C.J. DeMars

1994-01-01

Phenotypic traits were compared with a vigor (growth efficiency) index for accuracy in predicting susceptibility of white fir, Abies concolor (Gord. & Glend.) Lindl., during a drought-associated outbreak of the fir engraver, Scolytus centralis LeC., in the central Sierra Nevada at Lake Tahoe, California.Predictor variables were estimated for 633 firs in six forest...

12. Historic American Buildings Survey Photocopy, Yale University ENGRAVING, EAST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. Historic American Buildings Survey Photocopy, Yale University ENGRAVING, EAST FACADE: FLOOR PLAN (The New Englander, Vol. I, No. III, July 1843) AP2.N5, betw p. 304-307, 2 plates engr. By Daggett, Hinman + Co D.C. Hinman, del. Source: Yale Memorabilia, Yale University Sterling Memorial Library - Yale University, Dwight Hall, 69 High Street, New Haven, New Haven County, CT

Composition of the bacterial community in the gut of the pine engraver, Ips pini (Say) (Coloptera) colonizing red pine

Treesearch

Italo Jr. Delalibera; Archana Vasanthakumar; Benjamin J. Burwitz; Patrick D. Schloss; Kier D. Klepzig; Jo Handelsman; Kenneth F. Raffa

2007-01-01

The gut bacterial community of a bark beetle, the pine engraver Ips pini (Say), was characterized using culture-dependent and culture-independent methods. Bacteria from individual guts of larvae, pupae and adults were cultured and DNA was extracted from samples of pooled larval guts. Analysis of 16S rRNA gene sequences amplified directly from the gut...

Assessing the susceptibility of white fir to the fir engraver, Scolytus ventralis Lec. (Coleoptera: Scolytidae), using fungal inoculation

Treesearch

G.T. Ferrell; W.J. Otrosina; C.J. DeMars

1993-01-01

A method of assessing susceptibility of white fir, Abies concolor (Gord. and Glend.) Lindl., by fungal inoculation was tested during an outbreak of the fir engraver beetle, Scolytus ventralis LeC., at Lake Tahoe, California, in 1987 through 1989.A total of 592 firs growing in six forest stands containing trees infested by the beetle were inoculated with the mutualistic...

[Polyhedron of Dürer's engraving Melancholia. I--a Nürnberg sketch representing the Archimedean body].

PubMed

Weitzel, Hans

2007-01-01

New mathematical hypotheses are postulated concerning the truncated rhombohedron in Dürer's engraving Melencolia.I as well as the relation of the rhombohedron to the magic square. The two free parameters of a truncated rhombohedron have to be chosen in a way that (i) its front orthogonal elevation is nearly quadratical and with the form of the magic square, and that (ii) it possesses approximately a circumscribed sphere. Both conditions result in a value of 79.2 degrees for the angle of the rhombohedron. Measuring two lengths of the rhombohedron of the engraving yields the same value. In the magic square, the numbers are positioned in a way that the connection lines between four numbers give the sum 34 for lines which are the projection lines of the edges of the rhombohedron. In the Nürnberg-Codex of Dürer's manuscripts, exists a page with some sketches of mostly archimedean solids. One sketch represents a pentagon with approximately the measures of the six lateral faces of the truncated rhombohedron. It has to be looked upon as a preliminary sketch for the solid of the engraving. In 1543 Augustin Hirschvogel from Nürnberg, as the next after Dürer, rediscovered a further archimedean solid; this rediscovering has been attributed to D. Barbaro until now.

Growth and mortality of thinned knobcone x Monterey pine saplings affected by engraver beetles and a hard freeze

Treesearch

William W. Oliver

1979-01-01

Mortality and diameter growth loss were severe on study plots in a thinned plantation of 9-year-old trees. California five-spined engravers killed 15 percent of the trees and a hard freeze killed 20 percent of the survivors. Mortality was higher and subsequent diameter growth was lower in trees with most of their needles freeze-killed than in trees less severely...

Multifunctional cube-like system for biomedical applications featuring 3D printing by dual deposition, scanner, and UV engraving

NASA Astrophysics Data System (ADS)

Guzmán-González, J. V.; Saldaña-Martínez, M. I.; Barajas-González, O. G.; Guzmán-Ramos, V.; García-Garza, A. K.; Franco-Herrada, M. G.; Selvas Aguilar, R. J.; García-Ramírez, M. A.

2017-02-01

In this paper, a cubic-like structure is proposed to scan and print tools used as medical equipment at low cost for developing countries. The structure features a 3-axis frame plane that uses high-precision step motors. An actuator drives the "x and y" axis through serrated bands with 2 mm pitch. Those give an accuracy of 2.5 microns tops. The z-axe is driven by and inductive sensor that allows us to keep the focus to the printing bed as well as to search for non-smooth areas to correct it and deliver an homogeneous impression. The 3D scanner as well as the entire gears are placed underneath in order to save space. As extrude tip, we are using a 445 nm UV laser with 2000 mW of power. The laser system is able to perform several functions such as crystallizing, engraving or cut though a set of mirror arrays. Crystallization occurs when the laser is guided towards the base. This process allows us to direct it towards the polymer injector and as a result, it crystalizes on the spot. Another feature that this system is the engraving process that occurs while the base moves. The movement allows the beam to pass freely towards the base and perform the engraving process.

Controllable Surface Reorganization Engineering on Cobalt Phosphide Nanowire Arrays for Efficient Alkaline Hydrogen Evolution Reaction.

PubMed

Xu, Kun; Cheng, Han; Lv, Haifeng; Wang, Jingyu; Liu, Linqi; Liu, Si; Wu, Xiaojun; Chu, Wangsheng; Wu, Changzheng; Xie, Yi

2018-01-01

Developing highly efficient hydrogen evolution reaction (HER) catalysts in alkaline media is considered significant and valuable for water splitting. Herein, it is demonstrated that surface reorganization engineering by oxygen plasma engraving on electocatalysts successfully realizes a dramatically enhanced alkaline HER activity. Taking CoP nanowire arrays grown on carbon cloth (denoted as CoP NWs/CC) as an example, the oxygen plasma engraving can trigger moderate CoO x species formation on the surface of the CoP NWs/CC, which is visually verified by the X-ray absorption fine structure, high-resolution transmission electron microscopy, and energy-dispersive spectrometer (EDS) mapping. Benefiting from the moderate CoO x species formed on the surface, which can promote the water dissociation in alkaline HER, the surface reorganization of the CoP NWs/CC realizes almost fourfold enhanced alkaline HER activity and a 180 mV decreased overpotential at 100 mA cm -2 , compared with the pristine ones. More interestingly, this surface reorganization strategy by oxygen plasma engraving can also be effective to other electrocatalysts such as free-standing CoP, Co 4 N, O-CoSe 2 , and C-CoSe 2 nanowires, which verifies the universality of the strategy. This work thus opens up new avenues for designing alkaline HER electrocatalysts based on oxygen plasma engraving. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Evaluation of insecticides for protecting Southwestern ponderosa pines from attack by engraver beetles (Coleoptera: Curculionidae: Scolytinae).

PubMed

DeGomez, Tom E; Hayes, Christopher J; Anhold, John A; McMillin, Joel D; Clancy, Karen M; Bosu, Paul P

2006-04-01

Insecticides that might protect pine trees from attack by engraver beetles (Ips spp.) have not been rigorously tested in the southwestern United States. We conducted two field experiments to evaluate the efficacy of several currently and potentially labeled preventative insecticides for protecting high-value ponderosa pine, Pinus ponderosa Dougl ex. Laws., from attack by engraver beetles. Preventative sprays (0.19% permethrin [Permethrin Plus C]; 0.03, 0.06, and 0.12% bifenthrin [Onyx]; and 1.0 and 2.0% carbaryl [Sevin SL] formulations) and systemic implants (0.875 g per capsule acephate [Acecap] and 0.650 g per capsule dinotefuran) were assessed on bolts (sections of logs) as a surrogate for live trees for a period of 13 mo posttreatment. The pine engraver, Ips pini (Say), was the most common bark beetle found attacking control and treated bolts, but sixspined ips, Ips calligraphus (Germar), and Ips lecontei Swain also were present. After approximately 13 mo posttreatment in one experiment, the spray treatments with 2.0% carbaryl, 0.19% permethrin, and 0.06 or 0.12% bifenthrin prevented Ips attack on the bolts at a protection level of > or = 70%. The acephate and dinotefuran systemic insecticides, and the 0.03% bifenthrin spray, provided inadequate (< or = 36%) protection in this experiment. For the other experiment, sprayed applications of 1.0% carbaryl, 0.19% permethrin, and 0.06% bifenthrin prevented beetle attack at protection levels of > or = 90, > or = 80, and > or = 70%, respectively, when bolts were exposed to Ips beetle attack for approximately 9-15 wk posttreatment. The sprays with 0.19% permethrin and 0.06% bifenthrin also provided > or = 90% protection when bolts were exposed for approximately 15-54 wk posttreatment. We concluded that under the conditions tested, 1.0 and 2.0% carbaryl, 0.19% permethrin, and 0.06 and 0.12% binfenthrin were acceptable preventative treatments for protecting ponderosa pine from successful engraver beetle attack for one entire flight season in the U.S. Southwest.

A Unique Assemblage of Engraved Plaquettes from Ein Qashish South, Jezreel Valley, Israel: Figurative and Non-Figurative Symbols of Late Pleistocene Hunters-Gatherers in the Levant

PubMed Central

Yaroshevich, Alla; Bar-Yosef, Ofer; Boaretto, Elisabeta; Caracuta, Valentina; Greenbaum, Noam; Porat, Naomi; Roskin, Joel

2016-01-01

Three engraved limestone plaquettes from the recently excavated Epipaleolithic open-air site Ein Qashish South in the Jezreel Valley, Israel comprise unique evidence for symbolic behavior of Late Pleistocene foragers in the Levant. The engravings, uncovered in Kebaran and Geometric Kebaran deposits (ca. 23ka and ca. 16.5ka BP), include the image of a bird—the first figurative representation known so far from a pre-Natufian Epipaleolithic—along with geometric motifs such as chevrons, crosshatchings and ladders. Some of the engravings closely resemble roughly contemporary European finds interpreted as "systems of notations" or "artificial memory systems"–records related to timing of seasonal resources and associated aggregation events of nomadic groups. Moreover, similarly looking signs and patterns are well known from the context of the local Natufian—a final Epipaleolithic culture of sedentary or semi-sedentary foragers who started practicing agriculture. The investigation of the engravings found in Ein Qashish South involves conceptualizations developed in studies of European and local parallels, a selection of ethnographic examples and preliminary microscopic observations of the plaquettes. This shows that the figurative and non-figurative images comprise a coherent assemblage of symbols that might have been applied in order to store, share and transmit information related to social and subsistence realms of mobile bands. It further suggests that the site functioned as a locality of groups' aggregation and indicates social complexity of pre-Natufian foragers in the Levant. While alterations in social and subsistence strategies can explain the varying frequency of image use characterizing different areas of the Late Pleistocene world—the apparent similarity in graphics and the mode of their application support the possibility that symbol-mediated behavior has a common and much earlier origin. PMID:27557110

Atmospheric pressure plasma-assisted femtosecond laser engraving of aluminium

NASA Astrophysics Data System (ADS)

Gerhard, Christoph; Gimpel, Thomas; Tasche, Daniel; Koch née Hoffmeister, Jennifer; Brückner, Stephan; Flachenecker, Günter; Wieneke, Stephan; Schade, Wolfgang; Viöl, Wolfgang

2018-05-01

In this contribution, we report on the impact of direct dielectric barrier discharge argon plasma at atmospheric pressure on femtosecond laser engraving of aluminium. It is shown that the assisting plasma strongly affects the surface geometry and formation of spikes of both laser-engraved single lines and patterns of adjacent lines with an appropriate overlap. Further, it was observed that the overall ablation depth is significantly increased in case of large-scale patterning whereas no notable differences in ablation depth are found for single lines. Several possible mechanisms and underlying effects of this behaviour are suggested. The increase in ablation depth is supposed to be due to a plasma-induced removal of debris particles from the cutting point via charging and oxidation as supported by EDX analysis of the re-solidified debris. Furthermore, the impact of a higher degree of surface wrinkling as well as direct interactions of plasma species with the aluminium surface on the ablation process are discussed.

Effect of engraving speeds of CO₂ laser irradiation on In-Ceram Alumina roughness: a pilot study.

PubMed

Ersu, Bahadır; Ersoy, Orkun; Yuzugullu, Bulem; Canay, Senay

2015-05-01

The aim of the study was to determine the effect of CO₂ laser on surface roughness of In-Ceram-Alumina-ceramic. Four aluminum-oxide ceramic disc specimens were prepared of In-Ceram Alumina. Discs received CO₂ laser irradiation with different engraving speeds (100, 400, 600 and 800 mm/min) as a surface treatment. The roughness of the surfaces was measured on digital elevation models reconstructed from stereoscopic images acquired by scanning-electron-microscope. Surface roughness data were analyzed with One-Way-Analysis-of-Variance at a significance level of p<0.05. There was no significant difference between the roughness values (p=0.82). Due to higher laser durations, partial melting signs were observed on the surfaces. Tearing, smearing and swelling occurred on melted surfaces. Swelling accompanying melting increased the surface roughness, while laser power was fixed and different laser engraving speeds were applied. Although different laser irradiation speeds did not affect the roughness of ceramic surfaces, swelling was observed which led to changes on surfaces.

Shipyard Marking Methods

DTIC Science & Technology

1980-09-01

K ( 7 ) D , SOAPSTONE ( 1 3 ) E. lNK (5) F. CRAYON OR PAINT STICK (14) G.DYE (1) H . PE N C I L ( 1 ) 1. ELECTRIC ENGRAVING (1) 2. WHO MANUFACTURES...CHALK ( 2 ) D . DYE (1) H, SOAPSTONE (4) 4. W HAT TYPE OF DISPENSING METHOD IS UTILIZED WITH MARKING MATERIALS? A . BALL POINT TUBE ( 1 3 ) H , STEEL...9 ) L, BAMBOO PEN & INK POT F. SOAPSTONE (12) M . OIL PENCIL ( 1 ) G . L A C S T I C K ( 0 ) N . ELECTRI c ENGRAVER (1) 5, ARE STANDARD COLORS

Looking at the Camp: Paleolithic Depiction of a Hunter-Gatherer Campsite.

PubMed

García-Diez, Marcos; Vaquero, Manuel

2015-01-01

Landscapes and features of the everyday world were scarcely represented in Paleolithic art, especially those features associated with the human landscape (huts and campsites). On the contrary, other figurative motifs (especially animals) and signs, traditionally linked to the magic or religious conceptions of these hunter-gatherer societies, are the predominant themes of Upper Paleolithic art. This paper seeks to present an engraved schist slab recently found in the Molí del Salt site (North-eastern Iberia) and dated at the end of the Upper Paleolithic, ca. 13,800 years ago. This slab displays seven semicircular motifs that may be interpreted as the representation of dome-shaped huts. The analysis of individual motifs and the composition, as well as the ethnographic and archeological contextualization, suggests that this engraving is a naturalistic depiction of a hunter-gatherer campsite. Campsites can be considered the first human landscape, the first area of land whose visible features were entirely constructed by humans. Given the social meaning of campsites in hunter-gatherer life-styles, this engraving may be considered one of the first representations of the domestic and social space of a human group.

Laser marking as environment technology

NASA Astrophysics Data System (ADS)

Sobotova, Lydia; Badida, Miroslav

2017-11-01

The contribution deals with the laser marking as one of the progressive and environment friendly technologies with utilisation in many branches of industry. Engraving and other types of laser marking of different types of materials are very actual technologies these days. Laser marking decreases the waste creation in comparison with the other classical marking technologies, which use paintings or created chips. In this experimental investigation the laser marking surface texturing of material AL99,7 according to STN 42 4003:1993-08 (STN EN 573) has been conducted. The laser marking machine TruMark 6020 and software TruTops Mark were used. Laser surface texturing after laser marking has been realised under different combinations of process parameters: pulse frequency, pulse energy and laser beam scanning speed. The morphological characterization of engraving or annealing surfaces has been performed using scanning electron microscopy (SEM) technique. The evaluation of roughness of engraved surfaces has been realized according to STN EN ISO 4287 by using Surftest SJ 301. The aim of the contribution was to show how different laser parameters affect the surface texture and colour change of metallic materials while creating minimal waste.

A compact plasma pre-ionized TEA-CO2 laser pulse clipper for material processing

NASA Astrophysics Data System (ADS)

Gasmi, Taieb

2017-08-01

An extra-laser cavity CO2-TEA laser pulse clipper using gas breakdown techniques for high spatial resolution material processing and shallow material engraving and drilling processes is presented. Complete extinction of the nitrogen tail, that extends the pulse width, is obtained at pressures from 375 up to 1500 torr for nitrogen and argon gases. Excellent energy stability and pulse repeatability were further enhanced using high voltage assisted preionized plasma gas technique. Experimental data illustrates the direct correlation between laser pulse width and depth of engraving in aluminum and alumina materials.

Measurement of the refractive index by using a rectangular cell with a fs-laser engraved diffraction grating inner wall.

PubMed

Durán-Ramírez, Víctor M; Martínez-Ríos, Alejandro; Guerrero-Viramontes, J Ascención; Muñoz-Maciel, Jesús; Peña-Lecona, Francisco G; Selvas-Aguilar, Romeo; Anzueto-Sánchez, Gilberto

2014-12-01

A very simple method to obtain the refractive index of liquids by using a rectangular glass cell and a diffraction grating engraved by fs laser ablation on the inner face of one of the walls of the cell is presented. When a laser beam impinges normally on the diffraction grating, the diffraction orders are deviated when they pass through the cell filled with the liquid to be measured. By measuring the deviation of the diffraction orders, we can determine the refractive index of the liquid.

10. Photocopy of an engraving of a stained glass window ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. Photocopy of an engraving of a stained glass window design by Johann Friedrich Overbeck (1789-1869) on which two of the chancel windows in the Church of the Holy Cross are thought to have been based. This copy is of a photocopy obtained from the Treasury of Notre Dame de Paris, Paris, France, by the late Mrs. Walter C. White of Stateburg, South Carolina. Mrs. White's photocopy is in the possession of Mrs. Richard K. Anderson of the Borough House at Stateburg. - Church of the Holy Cross, State Route 261, Stateburg, Sumter County, SC

Unfolding Leonardo DA Vinci's Globe (ad 1504) to Reveal its Historical World Map

NASA Astrophysics Data System (ADS)

Verhoeven, G. J.; Missinne, S. J.

2017-08-01

This paper reports in detail on the image-based modelling and unwrapping approach used to create a two-dimensional projected map of an astonishing ostrich egg globe from AD 1504. This miniature egg globe is not only the oldest extant engraved globe, but it is also the oldest post-Columbian globe of the world and the first ever to depict Newfoundland and many other territories. The intention of digitally recording the surface geometry and colour of this unique artefact was to portray the original layout of the world map used by the Florentine Renaissance artist to make this globe. In addition, it was expected to substantiate iconographical details, which are hard to study at its scale of 1:80,000,000. The ostrich egg globe is the prototype of the Lenox Globe kept at the New York Public Library. The latter is very beneficial to examine how the egg globe looked like before being glued together at its equator. On the other hand, unfolding the map engraved in the ostrich egg halves enables a more detailed study of the remarkable details visible on both globes, since the engravings on the quasi-white egg surface are much easier to discern than those of the highly reflective red copper Lenox Globe. Finally, a detailed study of the unwrapped 3D surface is essential to learn more about the world vision of its creator and the incredible efforts that went into making this globe. Thanks to some particular pictographic details as well as the way in which the engravings are applied (by a left-handed person), the globe artist can be identified as Leonardo da Vinci.

Looking at the Camp: Paleolithic Depiction of a Hunter-Gatherer Campsite

PubMed Central

García-Diez, Marcos; Vaquero, Manuel

2015-01-01

Landscapes and features of the everyday world were scarcely represented in Paleolithic art, especially those features associated with the human landscape (huts and campsites). On the contrary, other figurative motifs (especially animals) and signs, traditionally linked to the magic or religious conceptions of these hunter-gatherer societies, are the predominant themes of Upper Paleolithic art. This paper seeks to present an engraved schist slab recently found in the Molí del Salt site (North-eastern Iberia) and dated at the end of the Upper Paleolithic, ca. 13,800 years ago. This slab displays seven semicircular motifs that may be interpreted as the representation of dome-shaped huts. The analysis of individual motifs and the composition, as well as the ethnographic and archeological contextualization, suggests that this engraving is a naturalistic depiction of a hunter-gatherer campsite. Campsites can be considered the first human landscape, the first area of land whose visible features were entirely constructed by humans. Given the social meaning of campsites in hunter-gatherer life-styles, this engraving may be considered one of the first representations of the domestic and social space of a human group. PMID:26629824

[Interaction between mathematics and melancholy].

PubMed

Radbruch, Knut

2004-01-01

The copperplate Melencolia I engraved by Dürer in 1514 illustrates various interdependencies between mathematics and melancholy. Dürer's engraving is one of the best known works of art in our western history. Up to our own times it has been interpreted repeatedly. The significance of Dürer's Melencolia I for our cultural history is subject of this essay. On the one hand the various changes of the conception of melancholy from antiquity up to Dürer' s times will be called in mind. In addition to it some examples will assert that during the last five centuries the correlation between mathematics and melancholy has been contemplated and shaped as well.

High power CO2 laser development with AOM integration for ultra high-speed pulses

NASA Astrophysics Data System (ADS)

Bohrer, Markus; Vaupel, Matthias; Nirnberger, Robert; Weinberger, Bernhard; Jamalieh, Murad

2017-01-01

There is a 500 billion USD world market for packaging expected to grow to a trillion in 2030. Austria plays an important role world wide for high speed laser engraving applications — especially when it comes to high end solutions. Such high end solutions are fundamental for the production of print forms for the packaging and decorating industry (e. g. cans). They are additionally used for security applications (e. g. for printing banknotes), for the textile printing industry and for creating embossing forms (e. g. for the production of dashboards in the automotive industry). High speed, high precision laser engraving needs laser resonators with very stable laser beams (400 - 800W) especially in combination with AOMs. Based upon a unique carbon fiber structure - stable within the sub-micrometer range - a new resonator has been developed, accompanied by most recent thermo-mechanical FEM calculations. The resulting beam is evaluated on an automated optical bench using hexapods, allowing to optimize the complete beam path with collimators and AOM. The major steps related to laser engraving of dry offset printing plates during the full workflow from the artists design to the printed result on an aluminum can is presented in this paper as well as laser characteristics, AOM integration and correlative CLSM and SEM investigation of the results.

Comparative impact analysis of laser radiation on steel grades 1045 and 5140

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lobankova, Olga V., E-mail: lobankovaov@gmail.com, E-mail: zilyu@yandex.ru; Zykov, Ilya Y., E-mail: lobankovaov@gmail.com, E-mail: zilyu@yandex.ru; Melnikov, Alexander G., E-mail: melnikov-ag@tpu.ru

2014-11-14

There are results of experiments with deep engraving steel grades 1045 and 5140. The deep engraving was made by laser system equipped with a pulsed ytterbium fiber laser. The objectives of the work is to evaluate the change in the structure and properties of the material in the laser exposure area. Microsections of materials have been investigated and microhardness was measured for this purpose. The optimal parameters of laser material removal were considered. It is shown that various changes occur in the metal structure, which depends on the composition of the steel. In particular, when processing with identical laser parameters,more » tempered steel 1045 remelts and its hardness changes, while steel 5140 does not change its structure.« less

[Electricity in healing: four different applications in a copper engraving of the Elightenment].

PubMed

te Heesen, Anke

2002-01-01

This text describes a single engraving of the picture encyclopedia Bilder-Akademie für die Jugend published from 1780 to 1784. It consisted of 52 picture tableaus, each with nine images that were connected through the biblical topic. The particular image under examination, the "Table 38", shows the healing wonders of Christ, the electrifying machine, a healing physician and the structure of ear and eye. Goal of this text will be to describe the different connections and meanings of these depicted scenes, as in the same time I will argue, that pictures can not only be interpreted by understanding how people looked at them, but also to take into question what people did with them.

Juan Valverde de Hamusco's unauthorized reproduction of a brain dissection by Andreas Vesalius.

PubMed

Lanska, Douglas J; Lanska, John R

2013-02-26

The objective of the present work is to examine images of the brain dissection by Flemish-born anatomist Andreas Vesalius (1514-1564) as originally represented in the Fabrica (1543), and later copied without Vesalius' permission by Spanish anatomist Juan Valverde de Hamusco (c1525-c1587) in Historia de la composicion del cuerpo humano (1556). Illustrations of the brain dissection in the Fabrica were obtained in digital form, resized, and arranged in a comparable montage to that presented by Valverde. Computer manipulations were used to assess image correspondence. The Valverde illustrations are approximately half the size and are mirror images of those in the Fabrica, but otherwise show the same dissection stages, and identical transverse brain levels and structures. The Valverde illustrations lack shadowing and show minor variations in perspective and fine details (e.g., branching pattern of the middle meningeal artery) from those in the Fabrica. Craftsmen under the direction of Valverde copied the woodcut prints in the Fabrica in close but approximate form by freehand engraving onto copper plates. Differences in the sizes of the images, and in perspective and fine detail, preclude direct tracing of images as the means of copying. Because engravings are in effect "flipped over" to make further prints, subsequent prints made from Valverde's copperplate engravings are mirror images of the prints in Vesalius' Fabrica.

Fast production of microfluidic devices by CO2 laser engraving of wax-coated glass slides.

PubMed

da Costa, Eric T; Santos, Mauro S F; Jiao, Hong; do Lago, Claudimir L; Gutz, Ivano G R; Garcia, Carlos D

2016-07-01

Glass is one of the most convenient materials for the development of microfluidic devices. However, most fabrication protocols require long processing times and expensive facilities. As a convenient alternative, polymeric materials have been extensively used due their lower cost and versatility. Although CO2 laser ablation has been used for fast prototyping on polymeric materials, it cannot be applied to glass devices because the local heating causes thermal stress and results in extensive cracking. A few papers have shown the ablation of channels or thin holes (used as reservoirs) on glass but the process is still far away from yielding functional glass microfluidic devices. To address these shortcomings, this communication describes a simple method to engrave glass-based capillary electrophoresis devices using standard (1 mm-thick) microscope glass slides. The process uses a sacrificial layer of wax as heat sink and enables the development of both channels (with semicircular shape) and pass-through reservoirs. Although microscope images showed some small cracks around the channels (that became irrelevant after sealing the engraved glass layer to PDMS) the proposed strategy is a leap forward in the application of the technology to glass. In order to demonstrate the capabilities of the approach, the separation of dopamine, catechol and uric acid was accomplished in less than 100 s. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Antennally mediated negative feedback regulation of pheromone production in the pine engraver beetle, Ips pini

NASA Astrophysics Data System (ADS)

Ginzel, Matthew D.; Bearfield, Jeremy C.; Keeling, Christopher I.; McCormack, Colin C.; Blomquist, Gary J.; Tittiger, Claus

2007-01-01

Bark beetles use monoterpenoid aggregation pheromones to coordinate host colonization and mating. These chemical signals are produced de novo in midgut cells via the mevalonate pathway, and pheromone production may be regulated by a negative feedback system mediated through the antennae. In this study, we explored the effect of antennectomy on pheromone production and transcript levels of key mevalonate pathway genes in juvenile hormone III-treated male pine engraver beetles, Ips pini (Say). Antennectomized males produced significantly greater amounts of pheromone than podectomized males and those with intact antennae. Likewise, mRNA levels of three mevalonate pathway genes important in pheromone biosynthesis were measured by quantitative real-time PCR and found to be induced to a greater extent with antennectomy, suggesting a transcriptional regulation of pheromone production.

17 CFR 285.4 - Preparation and filing of reports.

Code of Federal Regulations, 2010 CFR

2010-04-01

...: Insofar as practicable, the itemization shall include transfer agents' fees, cost of printing and engraving, and legal and accounting fees. The information may be given as subject to future contingencies...

5 CFR 304.102 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... develop a complex software system, or a plate maker may engrave a novel design. (f) Intemittent employment, as defined in part 340, subpart D, of this chapter, means employment without a regularly scheduled...

Charting the Development of Portsmouth Harbour, Dockyard and Town in the Tudor Period

NASA Astrophysics Data System (ADS)

Fontana, Dominic

2013-12-01

Portsmouth was crucial to the defence of Tudor England and consequently it was mapped for military planning purposes throughout the Tudor period from 1545. The resulting sequence of maps records much of the town and harbour. The maps offer opportunities for furthering our understanding of Tudor Portsmouth and its population Additionally, images of the urban landscape provided by the "Cowdray Engraving", which depicts the loss of Henry VIII's warship Mary Rose on the 19th July 1545, may also be considered and compared with those presented in the early maps of the town. This paper considers the Portsmouth maps of 1545, 1552, 1584 and the chart of Portsmouth Harbour dating from between 1586 and 1620. These are examined in relation to one another and compared with evidence from the Cowdray Engraving.

Raman identification of cuneiform tablet pigments: emphasis and colour technology in ancient Mesopotamian mid-third millennium.

PubMed

Chiriu, Daniele; Ricci, Pier Carlo; Carbonaro, Carlo Maria; Nadali, Davide; Polcaro, Andrea; Collins, Paul

2017-03-01

Cuneiform tablets tell the life and culture of Sumerian people in a sort of black and white tale because of the binary engraving technique. A leading question arises: did Mesopotamian people apply some kind of colour to decorate their tablets or to put emphasis on selected words? Some administrative and literary Sumerian cuneiform tablets of mid-third Millennium B.C. from the site of Kish (central Mesopotamia, modern Iraq) were dug up in twentieth-century and stored at the Ashmolean Museum of the Oxford University. Non-destructive micro-Raman spectroscopy is a powerful technique to detect the presence of residual pigments eventually applied to the engraving signs. Yellow, orange, red and white pigments have been detected and a possible identification has been proposed in this work. In particular yellow pigments are identified as Crocoite (PbCrO 4 ), Lead stannate (Pb 2 SnO 4 ); red pigments - hematite (Fe 2 O 3 ) and cuprite (Cu 2 O); White pigments - Lead carbonate (PbCO 3 ), calcium phosphate (Ca 3 (PO 4 ) 2 ), titanium dioxide (TiO 2 ), gypsum (CaSO 4 .2H 2 O); orange pigment a composition of red and yellow compounds. These results suggest that Sumerian people invented a new editorial style, to overcome the binary logic of engraving process and catch the reader's eye by decorating cuneiform tablets. Finally, the coloured rendering of the tablet in their original view is proposed.

5 CFR 532.279 - Special wage schedules for printing positions.

Code of Federal Regulations, 2010 CFR

2010-01-01

...-Single Color) 5 Platemaker (Single Color) 5 Film Assembler-Stripper (Partial and Composite Flats) 7... Operator (35-45 and Larger) 10 Offset Photographer (Halftone) 10 Negative Engraver 10 Bookbinder 10...

76 FR 64428 - Senior Executive Service; Combined Performance Review Board (PRB)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-18

... Greiner, Chief Financial Officer, United States Mint. John J. Manfreda, Administrator, TTB. Diane K. Wade... of Engraving and Printing (BEP), the Financial Management Service (FMS), the United [[Page 64429

17 CFR 229.511 - (Item 511) Other expenses of issuance and distribution.

Code of Federal Regulations, 2010 CFR

2010-04-01

... fees, Federal taxes, States taxes and fees, trustees' and transfer agents' fees, costs of printing and engraving, and legal, accounting, and engineering fees shall be itemized separately. Include as a separate...

Woodland Detection.

ERIC Educational Resources Information Center

Fischer, Richard B.

1989-01-01

Presents tips on nature observation during a woodland hike in the Adirondacks. Discusses engraver beetles and Dutch elm disease, birds' nests, hornets' nests, caterpillar webs, deer and bear signs, woodpecker holes, red squirrels, porcupine and beaver signs, and galls. (SV)

17 CFR Schedule A to Part 286 - Schedule A to Part 286

Code of Federal Regulations, 2010 CFR

2010-04-01

.... Insofar as practicable, the itemization shall include transfer agents' fees, cost of printing and engraving, and legal and accounting fees. The information may be given as subject to future contingencies...

Holes and grooves: the contribution of microscopy and taphonomy to the problem of art origins.

PubMed

D'Errico, F; Villa, P

1997-07-01

Optical and scanning electron microscopy, comparative anatomy, data from modern and Pleistocene carnivore accumulations, and analysis of archeological materials show that some of the pieces interpreted by various scholars as engraved or perforated bones from European Lower and Middle Paleolithic sites (such as Pech de l'Azé II, Stránska Skála, Kulna, Bois Roche and Cueva Morin) are not early manifestations of non-utilitarian behavior. Putative engravings are in fact vascular grooves, while perforated pieces are partially-digested bones regurgitated by hyenas. The current debate on art origins has often been centered on the symbolic value and cognitive implications of these and similar pieces without a first-hand analysis of the objects to provide convincing demonstration of the human origins of the marks. Such demonstration is a necessary prerequisite to any discussion of their significance for the evolution of symbolic behavior.

Facile and scalable disposable sensor based on laser engraved graphene for electrochemical detection of glucose

PubMed Central

Tehrani, Farshad; Bavarian, Behzad

2016-01-01

A novel and highly sensitive disposable glucose sensor strip was developed using direct laser engraved graphene (DLEG) decorated with pulse deposited copper nanocubes (CuNCs). The high reproducibility (96.8%), stability (97.4%) and low cost demonstrated by this 3-step fabrication method indicates that it could be used for high volume manufacturing of disposable glucose strips. The fabrication method also allows for a high degree of flexibility, allowing for control of the electrode size, design, and functionalization method. Additionally, the excellent selectivity and sensitivity (4,532.2 μA/mM.cm2), low detection limit (250 nM), and suitable linear range of 25 μM–4 mM, suggests that these sensors may be a great potential platform for glucose detection within the physiological range for tear, saliva, and/or sweat. PMID:27306706

Facile and scalable disposable sensor based on laser engraved graphene for electrochemical detection of glucose

NASA Astrophysics Data System (ADS)

Tehrani, Farshad; Bavarian, Behzad

2016-06-01

A novel and highly sensitive disposable glucose sensor strip was developed using direct laser engraved graphene (DLEG) decorated with pulse deposited copper nanocubes (CuNCs). The high reproducibility (96.8%), stability (97.4%) and low cost demonstrated by this 3-step fabrication method indicates that it could be used for high volume manufacturing of disposable glucose strips. The fabrication method also allows for a high degree of flexibility, allowing for control of the electrode size, design, and functionalization method. Additionally, the excellent selectivity and sensitivity (4,532.2 μA/mM.cm2), low detection limit (250 nM), and suitable linear range of 25 μM-4 mM, suggests that these sensors may be a great potential platform for glucose detection within the physiological range for tear, saliva, and/or sweat.

AN AUTOPSIC ART: DRAWINGS OF 'DR GRANVILLE'S MUMMY' IN THE ROYAL SOCIETY ARCHIVES.

PubMed

Riggs, Christina

2016-06-20

In 1821 Augustus Bozzi Granville FRS unwrapped and dissected an ancient Egyptian mummy, presenting the results of his examination to the Royal Society in 1825. He commissioned artist Henry Perry to draw the process in stages; these drawings were subsequently engraved by James Basire for publication in Philosophical Transactions. This article presents the original drawings for the first time, allowing comparison with their engravings. Taken together with Granville's accounts of the unwrapping of the mummy, the drawings demonstrate the significant role of illustration and other visual practices in anatomical argumentation in the early nineteenth century, as well as the prestige that commissioned illustrations lent to the performance and dissemination of scientific expertise. Moreover, the drawings include one of the key visual tropes of race science--a skull in left-facing profile, mapped with a facial angle--and thus indicate the early incorporation of Egyptian mummies into typologies of race.

An autopsic art: drawings of ‘Dr Granville's mummy’ in the Royal Society archives

PubMed Central

Riggs, Christina

2016-01-01

In 1821 Augustus Bozzi Granville FRS unwrapped and dissected an ancient Egyptian mummy, presenting the results of his examination to the Royal Society in 1825. He commissioned artist Henry Perry to draw the process in stages; these drawings were subsequently engraved by James Basire for publication in Philosophical Transactions. This article presents the original drawings for the first time, allowing comparison with their engravings. Taken together with Granville's accounts of the unwrapping of the mummy, the drawings demonstrate the significant role of illustration and other visual practices in anatomical argumentation in the early nineteenth century, as well as the prestige that commissioned illustrations lent to the performance and dissemination of scientific expertise. Moreover, the drawings include one of the key visual tropes of race science—a skull in left-facing profile, mapped with a facial angle—and thus indicate the early incorporation of Egyptian mummies into typologies of race. PMID:27386713

Viridarium Chymicum: The Encyclopedia of Alchemy

ERIC Educational Resources Information Center

Karpenko, Vladimir

1973-01-01

Describes a book containing the best illustrations in the history of alchemical literature, and is also considered unique because each of the 107 engravings is provided with a short Latin epigram explaining the sense of the picture. (DF)

31 CFR 605.1 - Conduct on Bureau of Engraving and Printing property.

Code of Federal Regulations, 2013 CFR

2013-07-01

... influence of intoxicating beverages, narcotics, hallucinogenic or dangerous drugs, or marijuana, or the consumption of such beverages or the use of such drugs or marijuana in or on the property is prohibited...

31 CFR 605.1 - Conduct on Bureau of Engraving and Printing property.

Code of Federal Regulations, 2012 CFR

2012-07-01

... influence of intoxicating beverages, narcotics, hallucinogenic or dangerous drugs, or marijuana, or the consumption of such beverages or the use of such drugs or marijuana in or on the property is prohibited...

31 CFR 605.1 - Conduct on Bureau of Engraving and Printing property.

Code of Federal Regulations, 2011 CFR

2011-07-01

... influence of intoxicating beverages, narcotics, hallucinogenic or dangerous drugs, or marijuana, or the consumption of such beverages or the use of such drugs or marijuana in or on the property is prohibited...

31 CFR 605.1 - Conduct on Bureau of Engraving and Printing property.

Code of Federal Regulations, 2010 CFR

2010-07-01

... influence of intoxicating beverages, narcotics, hallucinogenic or dangerous drugs, or marijuana, or the consumption of such beverages or the use of such drugs or marijuana in or on the property is prohibited...

31 CFR 605.1 - Conduct on Bureau of Engraving and Printing property.

Code of Federal Regulations, 2014 CFR

2014-07-01

... influence of intoxicating beverages, narcotics, hallucinogenic or dangerous drugs, or marijuana, or the consumption of such beverages or the use of such drugs or marijuana in or on the property is prohibited...

Detonation Failure Thickness Measurement in AN Annular Geometry

NASA Astrophysics Data System (ADS)

Mack, D. B.; Petel, O. E.; Higgins, A. J.

2007-12-01

The failure thickness of neat nitromethane in aluminum confinement was measured using a novel experimental technique. The thickness was approximated in an annular geometry by the gap between a concentric aluminum tube and rod. This technique was motivated by the desire to have a periodic boundary condition in the direction orthogonal to the annulus thickness, rather than a free surface occurring in typical rectangular geometry experiments. This results in a two-dimensional charge analogous to previous failure thickness setups but with infinite effective width (i.e. infinite aspect ratio). Detonation propagation or failure was determined by the observation of failure patterns engraved on the aluminum rod by the passing detonation. Analysis of these engraved patterns provides a statistical measurement of the spatial density of failure waves. Failure was observed as far as 180 thicknesses downstream. The failure thickness was measured to be 1.45 mm±0.15 mm.

31 CFR 1.1 - General.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Intelligence) and all offices reporting to such official, including immediate staff; (N) Assistant Secretary... Secretary (Intelligence and Analysis) and all offices reporting to such official, including immediate staff... Supervision. (viii) Bureau of Engraving and Printing. (ix) United States Mint. (x) Financial Crimes...

17 CFR 287.101 - Schedule A-Information required in reports pursuant to § 287.3.

Code of Federal Regulations, 2010 CFR

2010-04-01

... practicable, the itemization shall include transfer agents' fees, cost of printing and engraving, and legal and accounting fees. The information may be given as subject to future contingencies. If the amounts...

17 CFR 288.101 - Schedule A. Information required in reports pursuant to § 288.3.

Code of Federal Regulations, 2010 CFR

2010-04-01

... practicable, the itemization shall include transfer agents' fees, cost of printing and engraving, and legal and accounting fees. The information may be given as subject to future contingencies. If the amounts...

12. Photocopy of map. Original in library of Lehmann Building, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. Photocopy of map. Original in library of Lehmann Building, Missouri Botanical Garden. DETAIL OF MAP DRAWN AND ENGRAVED BY FRANCIS TUNICA IN 1865 - Missouri Botanical Garden, 2345 Tower Grove Avenue, Saint Louis, Independent City, MO

9. Historic American Buildings Survey VIGNETTE FROM PLAN OF THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. Historic American Buildings Survey VIGNETTE FROM PLAN OF THE CITY OF BALTIMORE... BY T. H. POPPLETON...ENGRAVED BY J. H. CONE...CORRECT TO 1852 - Aged Women's Home, 1400 West Lexington Street, Baltimore, Independent City, MD

78 FR 771 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-04

... Technologies, Eco Energy Solutions. 81,965 Melco Engraving, Inc...... Rochester Hills, MI.. 81,975 Xerox Corporation, Solid Wilsonville, OR...... Ink Development Group, Global Technology Development Group. I hereby...., HCL Technologies Limited. [[Page 773

[The reception of Vesalius in Spain and England].

PubMed

Portmann, Maria

2014-01-01

This paper discusses the depiction of engravings taken from Vesalius's, Valverde de Hamusco's and Casserio 's treatises in portraits during the 16th and the 17th centuries to understand better the reception of the Fabrica in Spain and England.

Reward Merit with Praise.

ERIC Educational Resources Information Center

Andrews, Hans A.

1987-01-01

Describes the efforts of two educational institutions to reward teaching excellence using positive feedback rather than merit pay incentives. An Arizona district, drawing on Herzberg's motivation theories, offers highly individualized rewards ranging from computers to conference money, while an Illinois community college bestows engraved plaques…

Laser micro machining of medical devices.

PubMed

Rausch, Y

2009-01-01

Excimer and increasingly ultra-short-pulsed lasers are important tools in the creation of microstructures and nanostructures. Capabilities of the latest systems are described, which include drilling 30-microm diameter holes in 50 to 100 microm thick metal foils and subsurface engraving of transparent materials.

75 FR 62921 - Senior Executive Service; Legal Division Performance Review Board

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-13

... Law and Regulation); M.J.K. Maher, Jr., Deputy Assistant General Counsel (Enforcement & Intelligence... General Counsel; Mark Monborne, Assistant General Counsel (Enforcement & Intelligence); Clarissa C. Potter... Engraving and Printing; Laurie Schaffer, Assistant General Counsel (Banking and Finance); Daniel P. Shaver...

76 FR 60128 - Senior Executive Service; Legal Division Performance Review Board

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-28

...; M.J.K. Maher, Jr., Deputy Assistant General Counsel (Enforcement & Intelligence); Margaret V... Counsel; Mark Monborne, Assistant General Counsel (Enforcement & Intelligence); Helen Morrison, Deputy Benefits Tax Counsel; Kevin Rice, Chief Counsel, Bureau of Engraving and Printing; Daniel P. Shaver, Chief...

A Novel Marking Reader for Progressive Addition Lenses Based on Gabor Holography.

PubMed

Perucho, Beatriz; Picazo-Bueno, José Angel; Micó, Vicente

2016-05-01

Progressive addition lenses (PALs) are marked with permanent engraved marks (PEMs) at standardized locations. Permanent engraved marks are very useful through the manufacturing and mounting processes, act as locator marks to re-ink the removable marks, and contain useful information about the PAL. However, PEMs are often faint and weak, obscured by scratches, partially occluded, and difficult to recognize on tinted lenses or with antireflection or scratch-resistant coatings. The aim of this article is to present a new generation of portable marking reader based on an extremely simplified concept for visualization and identification of PEMs in PALs. Permanent engraved marks on different PALs are visualized using classical Gabor holography as underlying principle. Gabor holography allows phase sample visualization with adjustable magnification and can be implemented in either classical or digital versions. Here, visual Gabor holography is used to provide a magnified defocused image of the PEMs onto a translucent visualization screen where the PEM is clearly identified. Different types of PALs (conventional, personalized, old and scratched, sunglasses, etc.) have been tested to visualize PEMs with the proposed marking reader. The PEMs are visible in every case, and variable magnification factor can be achieved simply moving up and down the PAL in the instrument. In addition, a second illumination wavelength is also tested, showing the applicability of this novel marking reader for different illuminations. A new concept of marking reader ophthalmic instrument has been presented and validated in the laboratory. The configuration involves only a commercial-grade laser diode and a visualization screen for PEM identification. The instrument is portable, economic, and easy to use, and it can be used for identifying patient's current PAL model and for marking removable PALs again or finding test points regardless of the age of the PAL, its scratches, tints, or coatings.

On the sensitivity of some common metallographic reagents to restoring obliterated marks on medium carbon (0.31% C) steel surfaces.

PubMed

Yin, Siaw Hui; Kuppuswamy, R

2009-01-10

Chemical etching, which is the most sensitive method to recover obliterated serial numbers on metal surfaces, has been practised quite successfully in forensic science laboratories all over the world. A large number of etchants suitable for particular metal surfaces based on empirical studies is available in the literature. This article reviews the sensitivity and efficacy of some popular etchants for recovering obliterated marks on medium carbon steel (0.31% C with ferrite-pearlite microstructure) used in automobile parts. The experiments involved engraving these carbon steel plates with some alphanumeric characters using a computer controlled machine "Gravograph" and erasing them to several depths below the bottom of their engraving depth. Seven metallographic reagents of which most of them were copper containing compounds were chosen for etching. The erased plates were etched with every one of these etchants using swabbing method. The results have revealed that Fry's reagent comprising cupric chloride 90 g, hydrochloric acid 120 mL and water 100mL provided the necessary contrast and was concluded to be the most sensitive. The same reagent was recommended by earlier workers for revealing strain lines in steel surfaces. Earlier, another reagent containing 5 g copper sulphate, 60 mL water, 30 mL (conc.) ammonium hydroxide, and 60 mL (conc.) hydrochloric acid was proved to be more sensitive to restore erased marks on low carbon steel (0.1% C with ferrite-pearlite structure) [M.A.M. Zaili, R. Kuppuswamy, H. Harun, Restoration of engraved marks on steel surfaces by etching technique, Forensic Sci. Int. 171 (2007) 27-32]. Thus the sensitivity of the etching reagent on steel surfaces appeared to be dependent on the content of carbon in the steel.

2. Photocopy of photoengraving illustration in George T. Clark, Leland ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. Photocopy of photo-engraving illustration in George T. Clark, Leland Stanford, War Governor . . . , Stanford, Calif., Stanford University Press, 1931, p. 114. NORTHWEST CORNER OF THE HOUSE PRIOR TO 1870 - Leland Stanford House, 800 N Street, Sacramento, Sacramento County, CA

31 CFR 1.20 - Purpose and scope of regulation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Intelligence) and all offices reporting to such official, including immediate staff; (14) Assistant Secretary... Secretary (Intelligence and Analysis) and all offices reporting to such official, including immediate staff... Supervision. (h) Bureau of Engraving and Printing. (i) United States Mint. (j) Financial Crimes Enforcement...

HOS cell adhesion on Ti6Al4V surfaces texturized by laser engraving

NASA Astrophysics Data System (ADS)

Sandoval Amador, A.; Carreño Garcia, H.; Escobar Rivero, P.; Peña Ballesteros, D. Y.; Estupiñán Duran, H. A.

2016-02-01

The cell adhesion of the implant is determinate by the chemical composition, topography, wettability, surface energy and biocompatibility of the biomaterial. In this work the interaction between human osteosarcoma HOS cells and textured Ti6Al4V surfaces were evaluated. Ti6Al4V surfaces were textured using a CO2 laser in order to obtain circular spots on the surfaces. Test surfaces were uncoated (C1) used as a control surface, and surfaces with points obtained by laser engraving, with 1mm spacing (C2) and 0.5mm (C3). The HOS cells were cultured in RPMI-1640 medium with 10% fetal bovine serum and 1% antibiotics. No cells toxicity after one month incubation time occurred. The increased cell adhesion and cell spreading was observed after 1, 3 and 5 days without significant differences between the sample surfaces (C2 and C3) and control (uncoated) at the end of the experiment.

A laser-engraved glass duplicating the structure, mechanics and performance of natural nacre.

PubMed

Valashani, Seyed Mohammad Mirkhalaf; Barthelat, Francois

2015-03-30

Highly mineralized biological materials such as nacre (mother of pearl), tooth enamel or conch shell boast unique and attractive combinations of stiffness, strength and toughness. The structures of these biological materials and their associated mechanisms are now inspiring new types of advanced structural materials. However, despite significant efforts, no bottom up fabrication method could so far match biological materials in terms of microstructural organization and mechanical performance. Here we present a new 'top down' strategy to tackling this fabrication problem, which consists in carving weak interfaces within a brittle material using a laser engraving technique. We demonstrate the method by fabricating and testing borosilicate glasses containing nacre-like microstructures infiltrated with polyurethane. When deformed, these materials properly duplicate the mechanisms of natural nacre: combination of controlled sliding of the tablets, accompanied with geometric hardening, strain hardening and strain rate hardening. The nacre-like glass is composed of 93 volume % (vol%) glass, yet 700 times tougher and breaks at strains as high as 20%.

Context and dating of Aurignacian vulvar representations from Abri Castanet, France

PubMed Central

White, Randall; Mensan, Romain; Bourrillon, Raphaëlle; Cretin, Catherine; Higham, Thomas F. G.; Clark, Amy E.; Sisk, Matthew L.; Tartar, Elise; Gardère, Philippe; Goldberg, Paul; Pelegrin, Jacques; Valladas, Hélène; Tisnérat-Laborde, Nadine; de Sanoit, Jacques; Chambellan, Dominique; Chiotti, Laurent

2012-01-01

We report here on the 2007 discovery, in perfect archaeological context, of part of the engraved and ocre-stained undersurface of the collapsed rockshelter ceiling from Abri Castanet, Dordogne, France. The decorated surface of the 1.5-t roof-collapse block was in direct contact with the exposed archaeological surface onto which it fell. Because there was no sedimentation between the engraved surface and the archaeological layer upon which it collapsed, it is clear that the Early Aurignacian occupants of the shelter were the authors of the ceiling imagery. This discovery contributes an important dimension to our understanding of the earliest graphic representation in southwestern France, almost all of which was discovered before modern methods of archaeological excavation and analysis. Comparison of the dates for the Castanet ceiling and those directly obtained from the Chauvet paintings reveal that the “vulvar” representations from southwestern France are as old or older than the very different wall images from Chauvet. PMID:22586111

18 CFR 131.43 - Report of securities issued.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... Securities and Exchange Commission registration fee 6. State mortgage registration tax 7. State commission fee 8. Fee for recording indenture 9. United States document tax 10. Printing and engraving expenses 11. Trustee's charges 12. Counsel fees 13. Accountant's fees 14. Cost of listing 15. Miscellaneous...

From the Cover: A Howiesons Poort tradition of engraving ostrich eggshell containers dated to 60,000 years ago at Diepkloof Rock Shelter, South Africa.

PubMed

Texier, Pierre-Jean; Porraz, Guillaume; Parkington, John; Rigaud, Jean-Philippe; Poggenpoel, Cedric; Miller, Christopher; Tribolo, Chantal; Cartwright, Caroline; Coudenneau, Aude; Klein, Richard; Steele, Teresa; Verna, Christine

2010-04-06

Ongoing debates about the emergence of modern human behavior, however defined, regularly incorporate observations from the later part of the southern African Middle Stone Age and emphasize the early appearance of artifacts thought to reflect symbolic practice. Here we report a large sample of 270 fragments of intentionally marked ostrich eggshell from the Howiesons Poort at Diepkloof Rock Shelter, Western Cape, South Africa. Dating from approximately 60,000 years ago, these pieces attest to an engraving tradition that is the earliest reliable evidence of what is a widespread modern practice. These abstract linear depictions were made on functional items (eggshell containers), which were curated and involved in daily hunter-gatherer life. The standardized production of repetitive patterns, including a hatched band motif, suggests a system of symbolic representation in which collective identities and individual expressions are clearly communicated, suggesting social, cultural, and cognitive underpinnings that overlap with those of modern people.

Possible Astronomical meaning of some El Molle findings at the ESO Observatory of La Silla

NASA Astrophysics Data System (ADS)

Vecchiato, Alberto; Bernardi, Gabriella; Bucciarelli, Beatrice

2015-08-01

The slopes surrounding the buildings of the European Southern Observatory at La Silla are known to house several hundred rock engravings dating back to the pre-Columbian populations that once inhabited this region. Although precise archaeological studies are missing since none of these sites has been excavated, these petroglyphs are attributed to people of the El Molle Culture, who around AD 300 had just abandoned their original lifestyle of hunting and gathering and developed more evolved settlements based on herding and farming.While it is difficult to ascertain precisely the meaning of these ancient rock engravings, it seems that a specific astronomical alignment can be attributed to a simple yet peculiar, man-made stone structure, which can be found in the same site. The archaeoastronomical dating of this alignment coincides to that of the petroglyphs. Moreover it allows to highlight a noticeable and intriguing connection with a practical function which appears quite reasonable for the population to whom this structure is attributed.

47 CFR 95.671 - Serial number.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Serial number. 95.671 Section 95.671 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO... number. The serial number of each CB transmitter must be engraved on the transmitter chassis. [53 FR...

47 CFR 95.671 - Serial number.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 5 2014-10-01 2014-10-01 false Serial number. 95.671 Section 95.671 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO... number. The serial number of each CB transmitter must be engraved on the transmitter chassis. [53 FR...

47 CFR 95.671 - Serial number.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 5 2011-10-01 2011-10-01 false Serial number. 95.671 Section 95.671 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO... number. The serial number of each CB transmitter must be engraved on the transmitter chassis. [53 FR...

47 CFR 95.671 - Serial number.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 5 2012-10-01 2012-10-01 false Serial number. 95.671 Section 95.671 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO... number. The serial number of each CB transmitter must be engraved on the transmitter chassis. [53 FR...

47 CFR 95.671 - Serial number.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 5 2013-10-01 2013-10-01 false Serial number. 95.671 Section 95.671 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO... number. The serial number of each CB transmitter must be engraved on the transmitter chassis. [53 FR...

Midgut tissue of male pine engraver , Ips pini, synthesizes monoterpenoid pheromone component ipsdienol de novo

NASA Astrophysics Data System (ADS)

Hall, Gregory M.; Tittiger, Claus; Andrews, Gracie L.; Mastick, Grant S.; Kuenzli, Marilyn; Luo, Xin; Seybold, Steven J.; Blomquist, Gary J.

2002-02-01

For over three decades the site and pathways of bark beetle aggregation pheromone production have remained elusive. Studies on pheromone production in Ips spp. bark beetles have recently shown de novo biosynthesis of pheromone components via the mevalonate pathway. The gene encoding a key regulated enzyme in this pathway, 3-hydroxy-3-methylglutaryl-CoA reductase ( HMG-R), showed high transcript levels in the anterior midgut of male pine engravers, Ips pini (Say) (Coleoptera:Scolytidae). HMG-R expression in the midgut was sex, juvenile hormone, and feeding dependent, providing strong evidence that this is the site of acyclic monoterpenoid (ipsdienol) pheromone production in male beetles. Additionally, isolated midgut tissue from fed or juvenile hormone III (JH III)-treated males converted radiolabeled acetate to ipsdienol, as assayed by radio-HPLC. These data support the de novo production of this frass-associated aggregation pheromone component by the mevalonate pathway. The induction of a metazoan HMG-R in this process does not support the postulated role of microorganisms in ipsdienol production.

Laser-induced fine structures on silicon exposed to THz-FEL

NASA Astrophysics Data System (ADS)

Irizawa, Akinori; Suga, Shigemasa; Nagashima, Takeshi; Higashiya, Atsushi; Hashida, Masaki; Sakabe, Shuji

2017-12-01

We found the irradiation of focused linearly polarized terahertz (THz)-waves emitted from THz free-electron laser (THz-FEL) engraved fine periodic stripe structures on the surfaces of single-crystal Si wafers. The experiments were performed at several wavelengths ranging from 50 to 82 μm with a macro-pulse fluence up to 32 J/cm2. The engraved structures are considered equivalent to the laser-induced periodic surface structures (LIPSS) produced by the irradiation of a femtosecond (fs)-pulsed laser in the near-infrared (NIR) region. However, the minimum period of ˜1/25 of the wavelength in the present case of THz-FEL is surely much smaller than those reported so far by use of fs-lasers and no more explicable by the so far proposed mechanisms. The finer LIPSS confirmed by longer-wavelength laser excitation by means of THz-FEL motivates investigation into the universal mechanism of LIPSS formation, which has been under a hot debate for decades.

26 CFR 20.2031-6 - Valuation of household and personal effects.

Code of Federal Regulations, 2010 CFR

2010-04-01

....g., jewelry, furs, silverware, paintings, etchings, engravings, antiques, books, statuary, vases... effect distribution or sale of any portion of the household or personal effects of the decedent in... one be deemed necessary prior to sale or distribution. (d) Additional rules if an appraisal involved...

26 CFR 20.2031-6 - Valuation of household and personal effects.

Code of Federal Regulations, 2011 CFR

2011-04-01

....g., jewelry, furs, silverware, paintings, etchings, engravings, antiques, books, statuary, vases... effect distribution or sale of any portion of the household or personal effects of the decedent in... one be deemed necessary prior to sale or distribution. (d) Additional rules if an appraisal involved...

26 CFR 20.2031-6 - Valuation of household and personal effects.

Code of Federal Regulations, 2014 CFR

2014-04-01

....g., jewelry, furs, silverware, paintings, etchings, engravings, antiques, books, statuary, vases... effect distribution or sale of any portion of the household or personal effects of the decedent in... one be deemed necessary prior to sale or distribution. (d) Additional rules if an appraisal involved...

26 CFR 20.2031-6 - Valuation of household and personal effects.

Code of Federal Regulations, 2012 CFR

2012-04-01

....g., jewelry, furs, silverware, paintings, etchings, engravings, antiques, books, statuary, vases... effect distribution or sale of any portion of the household or personal effects of the decedent in... one be deemed necessary prior to sale or distribution. (d) Additional rules if an appraisal involved...

26 CFR 20.2031-6 - Valuation of household and personal effects.

Code of Federal Regulations, 2013 CFR

2013-04-01

....g., jewelry, furs, silverware, paintings, etchings, engravings, antiques, books, statuary, vases... effect distribution or sale of any portion of the household or personal effects of the decedent in... one be deemed necessary prior to sale or distribution. (d) Additional rules if an appraisal involved...

40 CFR 1042.135 - Labeling.

Code of Federal Regulations, 2010 CFR

2010-07-01

... EMISSIONS FROM NEW AND IN-USE MARINE COMPRESSION-IGNITION ENGINES AND VESSELS Emission Standards and Related Requirements § 1042.135 Labeling. (a) Assign each engine a unique identification number and permanently affix, engrave, or stamp it on the engine in a legible way. (b) At the time of manufacture, affix a permanent and...

50 CFR 91.23 - Scoring criteria for contest.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Scoring criteria for contest. 91.23 Section 91.23 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR... anatomical accuracy, artistic composition and suitability for engraving in the production of a stamp. ...

Role of Ipsdienol, Ipsenol, and cis-Verbenol in chemical ecology of Ips avulsus, Ips calligraphus, and Ips grandicollis (Coleoptera: Curculionidae: Scolytinae)

Treesearch

Jeremy D. Allison; Jessica I. McKenney; Daniel R. Miller; Matthew L. Gimmel

2012-01-01

ABSTRACT Stressed or damaged pine (Pinus sp.) trees in the southeastern United States are often colonized simultaneously by three southern Ips species (Coleoptera: Curculionidae: Scolytinae): small southern pine engraver, Ips avulsus (Eichhoff); sixspined ips, Ips calligraphus (Germar); and...

Semiochemical -Based Communication in interspecific interactions between IPS PINI and Pityogenes Knecteli (Swaine) (Coleoptera: Scolytidae) in Lodgepole Pine

Treesearch

Therese M. Poland; John H. Borden

1994-01-01

The pine engraver, Ips pini Say, and Pityogenes knechteli Swaine often co-exist in lodgepole pine, Pinus contorta var. latifolia Engelmann. We tested the hypotheses that P. knechteli produces an attractive pheromone and that the attraction of P. knechteli...

War: Images of America. Social Studies Unit, Secondary Grades 7-12.

ERIC Educational Resources Information Center

Franklin, Edward; And Others

Designed to accompany an audiovisual filmstrip series devoted to presenting a visual history of life in America, this guide helps secondary school teachers supplement social studies materials dealing with wars over the past 200 years. Using authentic visuals including paintings, drawings, engravings, posters, photographs, songsheets, and cartoons,…

The Complexity-Adaptability Paradox: Issues for Combat Aircraft Development

DTIC Science & Technology

2011-02-16

to Darwin in many sources, including being engraved in stone on the floor of the California Academy of Science, it is most widely attributed to...showing laser -guided bombs guiding down elevator shafts. Observers have described this combination of precision and stealth as having a ―revolutionary

Frontalin interrupts attraction of Ips pini (Coleoptera; Scolytidae) to ipsdienol

Treesearch

Daniel R. Miller

2001-01-01

The pine engraver, Ips pini (Say), breeds in the phloem tissue of dead, dying, or downed pines, occasionally attacking standing live trees when populations build up to significant levels following logging activities or infestations by the mountain pine beetle, Dendroctonus ponderosae Hopkins, (Furniss and Carolin 1980). In British...

32 CFR 507.11 - Reproduction of designs.

Code of Federal Regulations, 2012 CFR

2012-07-01

... HERALDIC DESIGNS AND HERALDIC QUALITY CONTROL PROGRAM Commercial Use of Heraldic Designs § 507.11 Reproduction of designs. (a) The photographing, printing, or, in any manner making or executing any engraving... 32 National Defense 3 2012-07-01 2009-07-01 true Reproduction of designs. 507.11 Section 507.11...

32 CFR 507.11 - Reproduction of designs.

Code of Federal Regulations, 2013 CFR

2013-07-01

... HERALDIC DESIGNS AND HERALDIC QUALITY CONTROL PROGRAM Commercial Use of Heraldic Designs § 507.11 Reproduction of designs. (a) The photographing, printing, or, in any manner making or executing any engraving... 32 National Defense 3 2013-07-01 2013-07-01 false Reproduction of designs. 507.11 Section 507.11...

32 CFR 507.11 - Reproduction of designs.

Code of Federal Regulations, 2014 CFR

2014-07-01

... HERALDIC DESIGNS AND HERALDIC QUALITY CONTROL PROGRAM Commercial Use of Heraldic Designs § 507.11 Reproduction of designs. (a) The photographing, printing, or, in any manner making or executing any engraving... 32 National Defense 3 2014-07-01 2014-07-01 false Reproduction of designs. 507.11 Section 507.11...

32 CFR 507.11 - Reproduction of designs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... HERALDIC DESIGNS AND HERALDIC QUALITY CONTROL PROGRAM Commercial Use of Heraldic Designs § 507.11 Reproduction of designs. (a) The photographing, printing, or, in any manner making or executing any engraving... 32 National Defense 3 2010-07-01 2010-07-01 true Reproduction of designs. 507.11 Section 507.11...

32 CFR 507.11 - Reproduction of designs.

Code of Federal Regulations, 2011 CFR

2011-07-01

... HERALDIC DESIGNS AND HERALDIC QUALITY CONTROL PROGRAM Commercial Use of Heraldic Designs § 507.11 Reproduction of designs. (a) The photographing, printing, or, in any manner making or executing any engraving... 32 National Defense 3 2011-07-01 2009-07-01 true Reproduction of designs. 507.11 Section 507.11...

Relative abundance of the southern pine beetle associates in East Texas

Treesearch

John C. Moser; R. C. Thatcher; L. S. Pickard

1971-01-01

More than 90 species of insects were identified in bolts taken from east Texas loblolly pines infested by the southern pine beetle, Dendroctonus frontalis Zimmermann and by Ips engraver beetles (Coleoptera: scolytidae). Seasonal abundance of the associates generally paralleled that of the southern pine beetle.

40 CFR 60.581 - Definitions and symbols.

Code of Federal Regulations, 2011 CFR

2011-07-01

... image consisting of minute cells or indentations, specifically engraved or etched into the cylinder's...=the concentration of VOC in each gas stream (j) for the time period exiting the emission control... plant records, in kilograms. Mdj=the total mass of each dilution solvent (j) added at the print line in...

40 CFR 60.581 - Definitions and symbols.

Code of Federal Regulations, 2014 CFR

2014-07-01

... image consisting of minute cells or indentations, specifically engraved or etched into the cylinder's... = the concentration of VOC in each gas stream (j) for the time period exiting the emission control... determined from plant records, in kilograms. Mdj = the total mass of each dilution solvent (j) added at the...

40 CFR 60.581 - Definitions and symbols.

Code of Federal Regulations, 2010 CFR

2010-07-01

... image consisting of minute cells or indentations, specifically engraved or etched into the cylinder's...=the concentration of VOC in each gas stream (j) for the time period exiting the emission control... plant records, in kilograms. Mdj=the total mass of each dilution solvent (j) added at the print line in...

40 CFR 60.581 - Definitions and symbols.

Code of Federal Regulations, 2013 CFR

2013-07-01

... image consisting of minute cells or indentations, specifically engraved or etched into the cylinder's...=the concentration of VOC in each gas stream (j) for the time period exiting the emission control... plant records, in kilograms. Mdj=the total mass of each dilution solvent (j) added at the print line in...

40 CFR 60.581 - Definitions and symbols.

Code of Federal Regulations, 2012 CFR

2012-07-01

... image consisting of minute cells or indentations, specifically engraved or etched into the cylinder's...=the concentration of VOC in each gas stream (j) for the time period exiting the emission control... plant records, in kilograms. Mdj=the total mass of each dilution solvent (j) added at the print line in...

Response of different white fir geographic provenances to Trichosporium symbioticum inoculation in California

Treesearch

William J. Otrosina; Stanley J. Zarnoch

2012-01-01

We inoculated the fir engraver (Scolytus ventralis LeConte) associated fungus Trichosporium symbioticum Wright onto 56 white fir (Abies concolor (Gordon & Glend.) Lindl. ex Hildebr.) trees planted in a common garden study near Camino, California, that represented five geographic provenances of this species....

Riotous Images: Representations of Joseph Priestley in British Prints during the French Revolution

ERIC Educational Resources Information Center

Clay, Richard

2008-01-01

This article focuses on printed images that were published in Britain during the 1790s, depicting the educationist, theologian, chemist, physicist, historian and philosopher Joseph Priestley (1733-1804). It is argued that such etchings and engravings are indicative of, and contributed to, the lifelong political and historical education of late…

Acrylic and metal based Y-branch plastic optical fiber splitter with optical NOA63 polymer waveguide taper region

NASA Astrophysics Data System (ADS)

Ehsan, Abang Annuar; Shaari, Sahbudin; Rahman, Mohd Kamil Abd.

2011-01-01

We proposed a simple low-cost acrylic and metal-based Y-branch plastic optical fiber (POF) splitter which utilizes a low cost optical polymer glue NOA63 as the main waveguiding medium at the waveguide taper region. The device is composed of three sections: an input POF waveguide, a middle waveguide taper region and output POF waveguides. A desktop high speed CNC engraver is utilized to produce the mold inserts used for the optical devices. Short POF fibers are inserted into the engraved slots at the input and output ports. UV curable optical polymer glue NOA63 is injected into the waveguide taper region and cured. The assembling is completed when the top plate is positioned to enclose the device structure and connecting screws are secured. Both POF splitters have an average insertion loss of 7.8 dB, coupling ratio of 55: 45 and 57: 43 for the acrylic and metal-based splitters respectively. The devices have excess loss of 4.82 and 4.73 dB for the acrylic and metal-based splitters respectively.

78 FR 17875 - Commercial Driver's License Testing and Commercial Learner's Permit Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-25

... Section 383.153(b)(1) prohibits States from placing a digital color image or photograph or black and white... petitions requesting reconsideration on the grounds that prohibiting the inclusion of a digital color image... include a digital color image or photograph or black and white laser engraved photograph or other visual...

ß-Phellandrene: Kairomone for Pine Engraver, Ips pini (Say) (Coleoptera: Scolytidae)

Treesearch

Daniel R. Miller; John H. Borden

1990-01-01

The responses of Ips pini (Scolytidae) to multiple-funnel traps baited with the pheromone, ipsdienol, and various monoterpenes were determined in stands of lodgepole pine in southern and central British Columbia. Ips pini was attracted to both ipsdienol and ß-phellandrene, demonstrating that ß-phellandrene is a kairomone for this...

Optical security features for plastic card documents

NASA Astrophysics Data System (ADS)

Hossick Schott, Joachim

1998-04-01

Print-on-demand is currently a major trend in the production of paper based documents. This fully digital production philosophy will likely have ramifications also for the secure identification document market. Here, plastic cards increasingly replace traditionally paper based security sensitive documents such as drivers licenses and passports. The information content of plastic cards can be made highly secure by using chip cards. However, printed and other optical security features will continue to play an important role, both for machine readable and visual inspection. Therefore, on-demand high resolution print technologies, laser engraving, luminescent pigments and laminated features such as holograms, kinegrams or phase gratings will have to be considered for the production of secure identification documents. Very important are also basic optical, surface and material durability properties of the laminates as well as the strength and nature of the adhesion between the layers. This presentation will address some of the specific problems encountered when optical security features such as high resolution printing and laser engraving are to be integrated in the on-demand production of secure plastic card identification documents.

29 CFR 779.368 - Printing and engraving establishments not recognized as retail.

Code of Federal Regulations, 2010 CFR

2010-07-01

... goods for purposes of the exemption under section 13(a)(2) in any workweek in which an insubstantial... retail. 779.368 Section 779.368 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR STATEMENTS OF GENERAL POLICY OR INTERPRETATION NOT DIRECTLY RELATED TO REGULATIONS THE...

40 CFR 1051.135 - How must I label and identify the vehicles I produce?

Code of Federal Regulations, 2014 CFR

2014-07-01

... your vehicles must have three labels: a vehicle identification number as described in paragraph (a) of... identification number and permanently affix, engrave, or stamp it on the vehicle in a legible way. (b) At the... vehicles I produce? 1051.135 Section 1051.135 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

40 CFR 1051.135 - How must I label and identify the vehicles I produce?

Code of Federal Regulations, 2010 CFR

2010-07-01

... your vehicles must have three labels: a vehicle identification number as described in paragraph (a) of... identification number and permanently affix, engrave, or stamp it on the vehicle in a legible way. (b) At the... vehicles I produce? 1051.135 Section 1051.135 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

40 CFR 1051.135 - How must I label and identify the vehicles I produce?

Code of Federal Regulations, 2012 CFR

2012-07-01

... your vehicles must have three labels: a vehicle identification number as described in paragraph (a) of... identification number and permanently affix, engrave, or stamp it on the vehicle in a legible way. (b) At the... vehicles I produce? 1051.135 Section 1051.135 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

40 CFR 1051.135 - How must I label and identify the vehicles I produce?

Code of Federal Regulations, 2011 CFR

2011-07-01

... your vehicles must have three labels: a vehicle identification number as described in paragraph (a) of... identification number and permanently affix, engrave, or stamp it on the vehicle in a legible way. (b) At the... vehicles I produce? 1051.135 Section 1051.135 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

Postmodern Principles: In Search of a 21st Century Art Education

ERIC Educational Resources Information Center

Gude, Olivia

2004-01-01

The elements and principles of art are enshrined in most art education textbooks today (Crystal Productions, 2000; Hobbs & Salome, 1995; Ragans, 2000; Wachowiak and Clements, 2000). They are presented as the essence of artmaking. If not literally engraved in stone, the big seven (elements) + seven (principles) are reified in print, achieving…

Lightning Strike Simula tion for Studying Southern Pine Bark and Engraver Beetle Attacks

Treesearch

Mitchel C. Miller

1983-01-01

Endemic populations of the southern pine beetle (Dendroctonus frontalis Zimm.) and Ips spp. attacked loblolly pines (Pinus taeda L.) on which lightning strikes were simulated with detonating cord in the field. Southern pine beetles were reared in successive generations in these trees from fall 1981 through spring 1982; only

78 FR 27478 - Newell Coach Corporation, Grant of Petition for Decision of Inconsequential Noncompliance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-10

... Safety Standard (FMVSS) No. 120 Tire Selection and Rims for Motor Vehicles with a GVWR of More than 4,536... Administration (NHTSA), telephone (202) 366-0654, facsimile (202) 366-5930. Tires Involved: Affected are... that the noncompliance is that the tire and rim information lettering engraved on the vehicles...

Diffractive elements for generating microscale laser beam patterns: a Y2K problem

NASA Astrophysics Data System (ADS)

Teiwes, Stephan; Krueger, Sven; Wernicke, Guenther K.; Ferstl, Margit

2000-03-01

Lasers are widely used in industrial fabrication for engraving, cutting and many other purposes. However, material processing at very small scales is still a matter of concern. Advances in diffractive optics could provide for laser systems that could be used for engraving or cutting of micro-scale patterns at high speeds. In our paper we focus on the design of diffractive elements which can be used for this special application. It is a common desire in material processing to apply 'discrete' as well as 'continuous' beam patterns. Especially, the latter case is difficult to handle as typical micro-scale patterns are characterized by bad band-limitation properties, and as speckles can easily occur in beam patterns. It is shown in this paper that a standard iterative design method usually fails to obtain diffractive elements that generate diffraction patterns with acceptable quality. Insights gained from an analysis of the design problems are used to optimize the iterative design method. We demonstrate applicability and success of our approach by the design of diffractive phase elements that generate a discrete and a continuous 'Y2K' pattern.

Octopus-like suction cups: from natural to artificial solutions.

PubMed

Tramacere, F; Follador, M; Pugno, N M; Mazzolai, B

2015-05-13

Octopus suckers are able to attach to all nonporous surfaces and generate a very strong attachment force. The well-known attachment features of this animal result from the softness of the sucker tissues and the surface morphology of the portion of the sucker that is in contact with objects or substrates. Unlike artificial suction cups, octopus suckers are characterized by a series of radial grooves that increase the area subjected to pressure reduction during attachment. In this study, we constructed artificial suction cups with different surface geometries and tested their attachment performances using a pull-off setup. First, smooth suction cups were obtained for casting; then, sucker surfaces were engraved with a laser cutter. As expected, for all the tested cases, the engraving treatment enhanced the attachment performance of the elastomeric suction cups compared with that of the smooth versions. Moreover, the results indicated that the surface geometry with the best attachment performance was the geometry most similar to octopus sucker morphology. The results obtained in this work can be utilized to design artificial suction cups with higher wet attachment performance.

Response of the engraver beetle, Ipsperturbatus, to semiochemicals in white spruce stands of interior Alaska.

Treesearch

Richard A. Werner

1993-01-01

Field tests on the efficacy of various scolytid bark beetle pheromones to attract Ipsperturbatus (Eichhoff) were conducted from 1977 through 1992 in stands of white spruce (Picea glauca (Moench) Voss) in interior Alaska. Several pheromones attracted high numbers of L. perturbatus and species of the predator...

Pheromone interruption of pine engraver, Ips pini, by pheromones of mountain pine beetle, Dendroctonus ponderosae (Coleoptera: Scolytidae)

Treesearch

Daniel R. Miller; John H. Borden

2000-01-01

The effect of pheromones of Dendroctonus ponderosae Hopkins on the attraction of Ips pini (Say) to its pheromone, ipsdienol, was investigated in stands of lodgepole pine. The mixture of cis- and trans-verbenol significantly reduced catches of I. pini in traps baited with...

26 CFR 1.274-3 - Disallowance of deduction for gifts.

Code of Federal Regulations, 2010 CFR

2010-04-01

... sign, display rack, or other promotional material to be used on the business premises of the recipient... incidental costs such as for customary engraving on jewelry, or for packaging, insurance, and mailing or... purchase of an ornamental basket for packaging fruit will not be considered an incidental cost of packaging...

26 CFR 1.274-3 - Disallowance of deduction for gifts.

Code of Federal Regulations, 2011 CFR

2011-04-01

.... (ii) A sign, display rack, or other promotional material to be used on the business premises of the... incidental costs such as for customary engraving on jewelry, or for packaging, insurance, and mailing or... purchase of an ornamental basket for packaging fruit will not be considered an incidental cost of packaging...

Matthew baillie's specimens and engravings.

PubMed

Spear, Caitlin; Reilly, Maggie; McDonald, Stuart W

2017-08-17

In 1799, Matthew Baillie, William Hunter's nephew, published his famous atlas of pathology. It was entitled A Series of Engravings Accompanied with Explanations which are Intended to Illustrate the Morbid Anatomy of Some of the Most Important Parts of the Human Body. The present study aims to match the illustrations to extant specimens in the collections of William and John Hunter, preserved at the University of Glasgow and at the Royal College of Surgeons of England respectively. Baillie's book contains 10 fasciculi, consisting of 73 plates and 206 figures. The specimens Baillie illustrated came from his own collection and those of ten others, including his uncles, William and John Hunter. The book was illustrated by William Clift and engraved by James Basire, William Skelton and James Heath. Excluding eight illustrations of intestinal worms where the provenance of the specimens is uncertain, a total of 98 specimens from William Hunter's collection were illustrated in 104 figures. Eight of the specimens were calculi impossible to identify specifically. Excluding worms and calculi, 72 of William Hunter's specimens illustrated by Baillie are extant in the Hunterian Collection at the University of Glasgow. All but one of the 20 specimens illustrated that had belonged to John Hunter were identified in the on-line catalog of the Royal College of Surgeons of England. Baillie's own collection was destroyed when the Royal College of Surgeons of England was bombed in 1941. Baillie is credited with being the first to produce an illustrated systematic textbook of morbid anatomy and probably the first to illustrate emphysema and transposition of the great vessels. His book, however, was not comprehensive. It did not cover a number of topics such as muscles and bones and there is little coverage of the nervous system. Baillie's book, however, was an original concept as an atlas of morbid anatomy and showed his deep insight into pathology. Clin. Anat., 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

A Pedagogy of Sight: Microscopic Vision in Robert Hooke's "Micrographia"

ERIC Educational Resources Information Center

Jack, Jordynn

2009-01-01

Robert Hooke's "Micrographia" (1665) holds an important place in the history of scientific visual rhetoric. Hooke's accomplishment lies not only in a stunning array of engravings, but also in a "pedagogy of sight"--a rhetorical framework that instructs readers how to view images in accordance with an ideological or epistemic program. Hooke not…

1. Photocopy of woodengraving by Van Vleck & Keith from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Photocopy of wood-engraving by Van Vleck & Keith from a photograph by Shireff of Higgins' Daguerrian Rooms, Sacramento, with figures, etc. touched up by Nahl & Brothers. Illustration from The Californian Farmer, July 4, 1862. STANFORD HOUSE BY SETH BABSON, VIEW FROM THE NORTHEAST - Leland Stanford House, 800 N Street, Sacramento, Sacramento County, CA

Geographic variation in response of pine engraver, Ips pini, and associated species to pheromone, lanierone

Treesearch

Daniel R. Miller; Kenneth E. Gibson; K.F. Raffa; S.J. Seybold; S.A. Teale; D.L. Wood

1997-01-01

Lanierone strongly synergized the attraction of male and female Ips pini (Say) to ipsdienol in New York and Wisconsin. Synergy was only weakly significant in Montana and British Columbia and not significant in California. Catches of I. pini in ipsdienol-baited traps were increased 0% (i.e., nonsignificant) to 9942% by lanierone,...

5 CFR 2634.304 - Gifts and reimbursements.

Code of Federal Regulations, 2013 CFR

2013-01-01

.... Example 1. An official accepts a print, a pen and pencil set, and a letter opener from a community service...: $185 Gift 3—Letter opener: $20 The official must disclose Gifts 1 and 2, since together they aggregate.... Example. Items such as a pen and pencil set, letter opener, leather case or engraved pen are generally...

5 CFR 2634.304 - Gifts and reimbursements.

Code of Federal Regulations, 2012 CFR

2012-01-01

.... Example 1. An official accepts a print, a pen and pencil set, and a letter opener from a community service...: $185 Gift 3—Letter opener: $20 The official must disclose Gifts 1 and 2, since together they aggregate.... Example. Items such as a pen and pencil set, letter opener, leather case or engraved pen are generally...

5 CFR 2634.304 - Gifts and reimbursements.

Code of Federal Regulations, 2014 CFR

2014-01-01

.... Example 1. An official accepts a print, a pen and pencil set, and a letter opener from a community service...: $185 Gift 3—Letter opener: $20 The official must disclose Gifts 1 and 2, since together they aggregate.... Example. Items such as a pen and pencil set, letter opener, leather case or engraved pen are generally...

27 CFR 6.92 - Newspaper cuts.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Newspaper cuts. 6.92 Section 6.92 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS âTIED-HOUSEâ Exceptions § 6.92 Newspaper cuts. Newspaper cuts, mats, or engraved blocks for use in retailers' advertisements...

The Introduction and Early Use of Lithography in the United States.

ERIC Educational Resources Information Center

Barnhill, Georgia B.

This paper discusses the use of lithography in the United States in the early 1800s. Highlights include: the development of lithography in Germany between 1796 and 1798; early expectations for lithography; competition against the existing technology for the production of images--relief prints and copper-plate engravings; examples of 18th-century…

Ipsenol and Ipsdienol Attract Monochamus titillator (Coleoptera: Cerambycidae) and Associated Large Pine Woodborers in Southeastern United States

Treesearch

D. R. Miller; C. Asaro

2005-01-01

We determined the responses of the southern pine sawyer, Monochamus titillator (F.) (Coleoptera: Cerambycidae), to the pheromones (ipsenol, ipsdienol, and lanierone) used by pine engraver beetles (Coleoptera: Scolytidae) in the southeastern United States. (±)-Ipsenol, (±)- ipsdienol, or a combination increased catches of M. titillator...

31 CFR Appendix F to Subpart C of... - Bureau of Engraving and Printing

Code of Federal Regulations, 2013 CFR

2013-07-01

... notification within 35 days of the date of such notification and should be limited to one page. 6. Service of... disclosures, must satisfy one of the following identification requirements before action will be taken by the... action will be taken on any request if such official determines that it is necessary to protect against...

Orthotomicus erosus: A new pine-infesting bark beetle in the United States

Treesearch

Robert A. Haack

2004-01-01

Established populations of yet another new exotic beetle (Scolytidae) were discovered in the United States in 2004: Othotomicus erosus. This Eurasian bark beetle, commonly called the Mediterranean pine engraver, is native to the pine (Pinus)growing areas of Europe, northern Africa, and Asia. It has also been introduced to Chile, Fiji, South Africa, and Swaziland....

Variation in enantiospecific attraction of Ips avulsus (Coleoptera: Curculionidae) to the pheromone ipsdienol in Georgia.

Treesearch

Daniel Miller; Jeremy Allison

2011-01-01

In 2006, we tested the responses of the small southern pine engraver, Ips avulsus (Eichhoff) (Coleoptera: Curculionidae), to multiple-funnel traps baited with (+)-, (-)-, and (+/-)- ipsdienol. Three experiments were conducted in Georgia with all traps co-baited with one of the following lure combinations, respectively: experiment 1, ipsenol; experiment 2, lanierone and...

49 CFR 384.227 - Record of digital image or photograph.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 5 2014-10-01 2014-10-01 false Record of digital image or photograph. 384.227... § 384.227 Record of digital image or photograph. The State must: (a) Record the digital color image or.... The digital color image or photograph or black and white laser engraved photograph must either be made...

49 CFR 384.227 - Record of digital image or photograph.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 5 2013-10-01 2013-10-01 false Record of digital image or photograph. 384.227... § 384.227 Record of digital image or photograph. The State must: (a) Record the digital color image or.... The digital color image or photograph or black and white laser engraved photograph must either be made...

49 CFR 384.227 - Record of digital image or photograph.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false Record of digital image or photograph. 384.227... § 384.227 Record of digital image or photograph. The State must: (a) Record the digital color image or.... The digital color image or photograph or black and white laser engraved photograph must either be made...

49 CFR 384.227 - Record of digital image or photograph.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 5 2012-10-01 2012-10-01 false Record of digital image or photograph. 384.227... § 384.227 Record of digital image or photograph. The State must: (a) Record the digital color image or.... The digital color image or photograph or black and white laser engraved photograph must either be made...

31 CFR Appendix F to Subpart C of... - Bureau of Engraving and Printing

Code of Federal Regulations, 2011 CFR

2011-07-01

... DISCLOSURE OF RECORDS Privacy Act Pt. 1, Subpt. C, App. F Appendix F to Subpart C of Part 1—Bureau of... “Privacy Act Issuances.” 2. Requests for notification and access to records and accountings of disclosures... Office of the Federal Register in “Privacy Act Issuances.” Requests for information and specific guidance...

31 CFR Appendix F to Subpart C of... - Bureau of Engraving and Printing

Code of Federal Regulations, 2010 CFR

2010-07-01

... DISCLOSURE OF RECORDS Privacy Act Pt. 1, Subpt. C, App. F Appendix F to Subpart C of Part 1—Bureau of... “Privacy Act Issuances.” 2. Requests for notification and access to records and accountings of disclosures... Office of the Federal Register in “Privacy Act Issuances.” Requests for information and specific guidance...

What risk do invasive bark beetles and woodborers pose to forests of the western U.S.?: A case study of the Mediterranean pine engraver, Orthotomicus erosus

Treesearch

S.J. Seybold; M. Downing

2009-01-01

Recently reported, and likely to threaten the health of standing trees in the urban and peri-urban forests of the West, are at least five new subcortical insect/pathogen complexes [Agrilus coxalis Waterhouse (Buprestidae) and four species of Scolytidae: Orthotomicus (Ips) erosus (Wollaston), Hylurgus lignipderda...

Scaled Anatomical Model Creation of Biomedical Tomographic Imaging Data and Associated Labels for Subsequent Sub-surface Laser Engraving (SSLE) of Glass Crystals.

PubMed

Betts, Aislinn M; McGoldrick, Matthew T; Dethlefs, Christopher R; Piotrowicz, Justin; Van Avermaete, Tony; Maki, Jeff; Gerstler, Steve; Leevy, W M

2017-04-25

Biomedical imaging modalities like computed tomography (CT) and magnetic resonance (MR) provide excellent platforms for collecting three-dimensional data sets of patient or specimen anatomy in clinical or preclinical settings. However, the use of a virtual, on-screen display limits the ability of these tomographic images to fully convey the anatomical information embedded within. One solution is to interface a biomedical imaging data set with 3D printing technology to generate a physical replica. Here we detail a complementary method to visualize tomographic imaging data with a hand-held model: Sub Surface Laser Engraving (SSLE) of crystal glass. SSLE offers several unique benefits including: the facile ability to include anatomical labels, as well as a scale bar; streamlined multipart assembly of complex structures in one medium; high resolution in the X, Y, and Z planes; and semi-transparent shells for visualization of internal anatomical substructures. Here we demonstrate the process of SSLE with CT data sets derived from pre-clinical and clinical sources. This protocol will serve as a powerful and inexpensive new tool with which to visualize complex anatomical structures for scientists and students in a number of educational and research settings.

Evaluation of general-use insecticides for preventing host colonization by New Jersey southern pine beetles.

Treesearch

Brian Strom; W.K. Oldland; J.R. Meeker; J. Dunn

2015-01-01

Four general-use insecticides (Astro, Onyx, Dominion Tree & Shrub, and Xytect 2F) were evaluated for their effectiveness at preventing attacks by the southern pine beetle (SPB) (Dendroctonus frontalis) and the small southern pine engraver (Ips avulsus) using a previously developed small-bolt method. Evaluations were conducted between 58 and 126 days post treatment...

Southern pine engraver (Ips) Beetles in Your backyard

Treesearch

Kamal Gandhi; Daniel R. Miller

2009-01-01

Imagine that you decide to cut down a few pine trees in your yard, possibly because they are leaning a little too close to your house and you are concerned about damage to your house during a severe wind-storm. You cut the trees down in early spring prior to the start of hurricane season. Because of cost and other priorities, you leave...

KSC-03pd1235

NASA Image and Video Library

2003-04-24

KENNEDY SPACE CENTER, FLA. - Jim Lloyd, with the Mars Exploration Rover (MER) program, places on MER-1 a computer chip with about 35,000 laser-engraved signatures of visitors to the rovers at the Jet Propulsion Laboratory. The signatures include those of senators, artists, and John Glenn. The identical Mars rovers are scheduled to launch June 5 and June 25 from Cape Canaveral Air Force Station.

Divergence in the evolution of Paleolithic symbolic and technological systems: The shining bull and engraved tablets of Rocher de l'Impératrice

PubMed Central

Naudinot, Nicolas; Bourdier, Camille; Laforge, Marine; Paris, Céline; Bellot-Gurlet, Ludovic; Beyries, Sylvie; Thery-Parisot, Isabelle; Le Goffic, Michel

2017-01-01

The development of the Azilian in Western Europe 14,000 years ago is considered a “revolution” in Upper Paleolithic Archaeology. One of the main elements of this rapid social restructuring is the abandonment of naturalistic figurative art on portable pieces or on cave walls in the Magdalenian in favor of abstract expression on small pebbles. Recent work shows that the transformation of human societies between the Magdalenian and the Azilian was more gradual. The discovery of a new Early Azilian site with decorated stones in France supports this hypothesis. While major changes in stone tool technology between the Magdalenian and Azilian clearly mark important adaptive changes, the discovery of 45 engraved schist tablets from archaeological layers at Le Rocher de l’Impératrice attests to iconographic continuity together with special valorization of aurochs as shown by a “shining” bull depiction. This evidence suggests that some cultural features such as iconography may lag far behind technological changes. We also argue that eventual change in symbolic expression, which includes the later disappearance of figurative art, provides new insight into the probable restructuring of the societies. PMID:28257445

Divergence in the evolution of Paleolithic symbolic and technological systems: The shining bull and engraved tablets of Rocher de l'Impératrice.

PubMed

Naudinot, Nicolas; Bourdier, Camille; Laforge, Marine; Paris, Céline; Bellot-Gurlet, Ludovic; Beyries, Sylvie; Thery-Parisot, Isabelle; Le Goffic, Michel

2017-01-01

The development of the Azilian in Western Europe 14,000 years ago is considered a "revolution" in Upper Paleolithic Archaeology. One of the main elements of this rapid social restructuring is the abandonment of naturalistic figurative art on portable pieces or on cave walls in the Magdalenian in favor of abstract expression on small pebbles. Recent work shows that the transformation of human societies between the Magdalenian and the Azilian was more gradual. The discovery of a new Early Azilian site with decorated stones in France supports this hypothesis. While major changes in stone tool technology between the Magdalenian and Azilian clearly mark important adaptive changes, the discovery of 45 engraved schist tablets from archaeological layers at Le Rocher de l'Impératrice attests to iconographic continuity together with special valorization of aurochs as shown by a "shining" bull depiction. This evidence suggests that some cultural features such as iconography may lag far behind technological changes. We also argue that eventual change in symbolic expression, which includes the later disappearance of figurative art, provides new insight into the probable restructuring of the societies.

The art of science: a 'rediscovery' of the Lister copperplates.

PubMed

Roos, Anna Marie

2012-03-20

In 1712 Martin Lister bequeathed the collection of more than 1000 copperplates to the University of Oxford that he used for his Historiae Conchyliorum, the first comprehensive study of conchology. In the mid-eighteenth century, William Huddesford, keeper of the Bodleian Library, used the copperplates to create another edition of Historiae, but after that they are not mentioned again in the published literature. I recently 'rediscovered' the plates in the Bodleian Library, since their transfer from the Ashmolean Museum in 1860. I use historical analysis, as well as a selective study of the copperplates with X-ray fluorescence techniques, to examine a portion of the plates and the process of their production. I show that Martin Lister's daughter engraved a paper for Philosophical Transactions, and demonstrate that she was among the first female scientific illustrators to use a microscope. Furthermore, one of the Lister copperplates may be the last survivor of those engraved for Philosophical Transactions, the rest having been surrendered to the nation in World War I. The significant intellectual and artisanal challenges presented to a skilful naturalist in the transformation of a field specimen into an aesthetically pleasing illustration as well as a scientific object conveying taxonomic information are delineated.

Use of Chemicals for Prevention and Control of Southern Pine Beetle Infestations

Treesearch

Ronald F. Billings

2011-01-01

The southern pine beetle (SPB) is a major threat to pine forests in the Southeastern United States, Mexico, and Central America. In concert with one or more species of southern pine engraver beetles, SPB also may attack and kill pines in residential, recreational, or urban settings. Different control strategies and tactics have been used over the years to try to...

North-South Variation in the Response of the Pine Engraver (Coleoptera: Scolytidae) to Lanierone and Ipsdienol in Eastern North America

Treesearch

D.R. Miller; K.F. Raffa; M.J. Dalusky; C.W. Berisford

2003-01-01

Lindgren multiple-funnel traps were used to evaluate the response of the pine en- graver, Ips pini (Say), to the pheromones lanierone and ipsdienol, in Wisconsin and in southern Appalachia (western North Carolina and northern Georgia). As in Wisconsin, the attraction of I. pini to ipsdienol-baited traps in southern Appalachia was...

A Simple Rearing Technique for Obtaining Eggs or Young Larvae of the Southern Pine Beetle

Treesearch

Edgar W. Clark

1965-01-01

In two earlier notes we described techniques that utilized pine bolts for rearing the southern pine beetle (Dendroctonus frontalis Zimm. ) and the coarse writing engraver (Ips calligraphus Germ. ) (Clark and Osgood 1964a, 1964b). This note presents ample technique for maintaining a constant, easily accessible source of southern pine beetle eggs or larvae. It is a...

Responses of Ips pini (Say), Pityogenes knechteli Swaine and Associated Beetles (Coleoptera) to Host Monoterpenes in Stands of Lodgepole Pine

Treesearch

Daniel R. Miller; John H. Borden

2003-01-01

We conducted seven experiments in stands of mature lodgepole pine in southern British Columbia to elucidate the role of host volatiles in the semiochemical ecology of the pine engraver, Ips pini (Say) (Coleoptera: Scolytidae), with particular reference to the behavioral responses of predators and competing species of bark beetles. Our results demonstrated that the...

Boring in response to bark and phloem extracts from North American trees does not explain host acceptance behavior of Orthotomicus erosus (Coleoptera: Scolytidae)

Treesearch

Abigail J. Walter; Stephen A. Kells; Robert C. Venette; Steven J. Seybold

2010-01-01

When invasive herbivorous insects encounter novel plant species, they must determine whether the novel plants are hosts. The Mediterranean pine engraver, Orthotomicus erosus (Wollaston), an exotic bark beetle poised to expand its range in North America, accepts hosts after contacting the bark. To test the hypothesis that O. erosus...

Suitability of pines and other conifers as hosts for the invasive Mediterranean pine engraver (Coleoptera: Scolytidae) in North America.

PubMed

Lee, Jana C; Flint, Mary Louise; Seybold, Steven J

2008-06-01

The invasive Mediterranean pine engraver, Orthotomicus erosus (Wollaston) (Coleoptera: Scolytidae), was detected in North America in 2004, and it is currently distributed in the southern Central Valley of California. It originates from the Mediterranean region, the Middle East, and Asia, and it reproduces on pines (Pinus spp.). To identify potentially vulnerable native and adventive hosts in North America, no-choice host range tests were conducted in the laboratory on 22 conifer species. The beetle reproduced on four pines from its native Eurasian range--Aleppo, Canary Island, Italian stone, and Scots pines; 11 native North American pines--eastern white, grey, jack, Jeffrey, loblolly, Monterey, ponderosa, red, Sierra lodgepole, singleleaf pinyon, and sugar pines; and four native nonpines--Douglas-fir, black and white spruce, and tamarack. Among nonpines, fewer progeny developed and they were of smaller size on Douglas-fir and tamarack, but sex ratios of progeny were nearly 1:1 on all hosts. Last, beetles did not develop on white fir, incense cedar, and coast redwood. With loblolly pine, the first new adults emerged 42 d after parental females were introduced into host logs at temperatures of 20-33 degrees C and 523.5 or 334.7 accumulated degree-days based on lower development thresholds of 13.6 or 18 degrees C, respectively.

[Diprosopus triophthalmus. From ancient terracotta sculptures to spiral computer tomographic reconstruction].

PubMed

Sokiranski, R; Pirsig, W; Nerlich, A

2005-03-01

A still-born male fetus from the 19th century, fixed in formalin and presenting as diprosopia triophthalmica, was analysed by helical computer tomography and virtually reconstructed without damage. This rare, incomplete, symmetrical duplication of the face on a single head with three eyes, two noses and two mouths develops in the first 3 weeks of gestation and is a subset of the category of conjoined twins with unknown underlying etiology. Spiral computer tomography of fixed tissue demonstrated in the more than 100 year old specimen that virtual reconstruction can be performed in nearly the same way as in patients (contrast medium application not possible). The radiological reconstruction of the Munich fetus, here confined to head and neck data, is the basis for comparison with a number of imaging procedures of the last 3000 years. Starting with some Neolithic Mesoamerican ceramics, the "Pretty Ladies of Tlatilco", diprosopia triophthalmica was also depicted on engravings of the 16th and 17th century A.D. by artists as well as by the anatomist Soemmering and his engraver Berndt in the 18th century. Our modern spiral computer tomography confirms the ability of our ancestors to depict diprosopia triophthalmica in paintings and sculptures with a high level of natural precision.

Scaled Anatomical Model Creation of Biomedical Tomographic Imaging Data and Associated Labels for Subsequent Sub-surface Laser Engraving (SSLE) of Glass Crystals

PubMed Central

Dethlefs, Christopher R.; Piotrowicz, Justin; Van Avermaete, Tony; Maki, Jeff; Gerstler, Steve; Leevy, W. M.

2017-01-01

Biomedical imaging modalities like computed tomography (CT) and magnetic resonance (MR) provide excellent platforms for collecting three-dimensional data sets of patient or specimen anatomy in clinical or preclinical settings. However, the use of a virtual, on-screen display limits the ability of these tomographic images to fully convey the anatomical information embedded within. One solution is to interface a biomedical imaging data set with 3D printing technology to generate a physical replica. Here we detail a complementary method to visualize tomographic imaging data with a hand-held model: Sub Surface Laser Engraving (SSLE) of crystal glass. SSLE offers several unique benefits including: the facile ability to include anatomical labels, as well as a scale bar; streamlined multipart assembly of complex structures in one medium; high resolution in the X, Y, and Z planes; and semi-transparent shells for visualization of internal anatomical substructures. Here we demonstrate the process of SSLE with CT data sets derived from pre-clinical and clinical sources. This protocol will serve as a powerful and inexpensive new tool with which to visualize complex anatomical structures for scientists and students in a number of educational and research settings. PMID:28518066

Drawings of fossils by Robert Hooke and Richard Waller

PubMed Central

Kusukawa, Sachiko

2013-01-01

The drawings of fossils by Robert Hooke and Richard Waller that were the basis of the engravings in Hooke's Posthumous works (1705) are published here for the first time. The drawings show that both Hooke and Waller were proficient draftsmen with a keen eye for the details of petrified objects. These drawings provided Hooke with a polemic edge in making the case for the organic origins of ‘figured stones’.

Characteristics of the Arcing Plasma Formation Effect in Spark-Assisted Chemical Engraving of Glass, Based on Machine Vision

PubMed Central

Wu, Dung-Sheng

2018-01-01

Spark-assisted chemical engraving (SACE) is a non-traditional machining technology that is used to machine electrically non-conducting materials including glass, ceramics, and quartz. The processing accuracy, machining efficiency, and reproducibility are the key factors in the SACE process. In the present study, a machine vision method is applied to monitor and estimate the status of a SACE-drilled hole in quartz glass. During the machining of quartz glass, the spring-fed tool electrode was pre-pressured on the quartz glass surface to feed the electrode that was in contact with the machining surface of the quartz glass. In situ image acquisition and analysis of the SACE drilling processes were used to analyze the captured image of the state of the spark discharge at the tip and sidewall of the electrode. The results indicated an association between the accumulative size of the SACE-induced spark area and deepness of the hole. The results indicated that the evaluated depths of the SACE-machined holes were a proportional function of the accumulative spark size with a high degree of correlation. The study proposes an innovative computer vision-based method to estimate the deepness and status of SACE-drilled holes in real time. PMID:29565303

Characteristics of the Arcing Plasma Formation Effect in Spark-Assisted Chemical Engraving of Glass, Based on Machine Vision.

PubMed

Ho, Chao-Ching; Wu, Dung-Sheng

2018-03-22

Spark-assisted chemical engraving (SACE) is a non-traditional machining technology that is used to machine electrically non-conducting materials including glass, ceramics, and quartz. The processing accuracy, machining efficiency, and reproducibility are the key factors in the SACE process. In the present study, a machine vision method is applied to monitor and estimate the status of a SACE-drilled hole in quartz glass. During the machining of quartz glass, the spring-fed tool electrode was pre-pressured on the quartz glass surface to feed the electrode that was in contact with the machining surface of the quartz glass. In situ image acquisition and analysis of the SACE drilling processes were used to analyze the captured image of the state of the spark discharge at the tip and sidewall of the electrode. The results indicated an association between the accumulative size of the SACE-induced spark area and deepness of the hole. The results indicated that the evaluated depths of the SACE-machined holes were a proportional function of the accumulative spark size with a high degree of correlation. The study proposes an innovative computer vision-based method to estimate the deepness and status of SACE-drilled holes in real time.

Non-toric extended depth of focus contact lenses for astigmatism and presbyopia correction

NASA Astrophysics Data System (ADS)

Ben Yaish, Shai; Zlotnik, Alex; Yehezkel, Oren; Lahav-Yacouel, Karen; Belkin, Michael; Zalevsky, Zeev

2010-02-01

Purpose: Testing whether the extended depth of focus technology embedded on non-toric contact lenses is a suitable treatment for both astigmatism and presbyopia. Methods: The extended depth of focus pattern consisting of microndepth concentric grooves was engraved on a surface of a mono-focal soft contact lens. These grooves create an interference pattern extending the focus from a point to a length of about 1mm providing a 3.00D extension in the depth of focus. The extension in the depth of focus provides high quality focused imaging capabilities from near through intermediate and up to far ranges. Due to the angular symmetry of the engraved pattern the extension in the depth of focus can also resolve regular as well as irregular astigmatism aberrations. Results: The contact lens was tested on a group of 8 astigmatic and 13 subjects with presbyopia. Average correction of 0.70D for astigmatism and 1.50D for presbyopia was demonstrated. Conclusions: The extended depth of focus technology in a non-toric contact lens corrects simultaneously astigmatism and presbyopia. The proposed solution is based upon interference rather than diffraction effects and thus it is characterized by high energetic efficiency to the retina plane as well as reduced chromatic aberrations.

Dynamic photopatterning of cells in situ by Q-switched neodymium-doped yttrium ortho-vanadate laser.

PubMed

Deka, Gitanjal; Okano, Kazunori; Kao, Fu-Jen

2014-01-01

Cellular micropattering has been increasingly adopted in quantitative biological experiments. A Q-switched pulsed neodymium-doped yttrium ortho-vanadate (Nd∶YVO4) laser directed in-situ microfabrication technique for cell patterning is presented. A platform is designed uniquely to achieve laser ablation. The platform is comprised of thin gold coating over a glass surface that functions as a thermal transducer and is over-layered by a cell repellant polymer layer. Micropatterns are engraved on the platform, subsequently exposing specific cell adhesive micro-domains by ablating the gold-polymer coating photothermally. Experimental results indicate that the proposed approach is applicable under culture conditions, viable toward cells, and has a higher engraving speed. Possible uses in arraying isolated single cells on the platform are also shown. Additionally, based on those micro-patterns, dynamic cellular morphological changes and migrational speed in response to geometrical barriers are studied to demonstrate the potential applications of the proposed approach. Our results further demonstrate that cells in narrower geometry had elongated shapes and higher migrational speed than those in wider geometry. Importantly, the proposed approach will provide a valuable reference for efforts to study single cell dynamics and cellular migration related processes for areas such as cell division, wound healing, and cancer invasion.

Engineering model for ultrafast laser microprocessing

NASA Astrophysics Data System (ADS)

Audouard, E.; Mottay, E.

2016-03-01

Ultrafast laser micro-machining relies on complex laser-matter interaction processes, leading to a virtually athermal laser ablation. The development of industrial ultrafast laser applications benefits from a better understanding of these processes. To this end, a number of sophisticated scientific models have been developed, providing valuable insights in the physics of the interaction. Yet, from an engineering point of view, they are often difficult to use, and require a number of adjustable parameters. We present a simple engineering model for ultrafast laser processing, applied in various real life applications: percussion drilling, line engraving, and non normal incidence trepanning. The model requires only two global parameters. Analytical results are derived for single pulse percussion drilling or simple pass engraving. Simple assumptions allow to predict the effect of non normal incident beams to obtain key parameters for trepanning drilling. The model is compared to experimental data on stainless steel with a wide range of laser characteristics (time duration, repetition rate, pulse energy) and machining conditions (sample or beam speed). Ablation depth and volume ablation rate are modeled for pulse durations from 100 fs to 1 ps. Trepanning time of 5.4 s with a conicity of 0.15° is obtained for a hole of 900 μm depth and 100 μm diameter.

A survey of some metallographic etching reagents for restoration of obliterated engraved marks on aluminium-silicon alloy surfaces.

PubMed

Uli, Norjaidi; Kuppuswamy, R; Amran, Mohd Firdaus Che

2011-05-20

A brief survey to assess the sensitivity and efficacy of some common etching reagents for revealing obliterated engraved marks on Al-Si alloy surfaces is presented. Experimental observations have recommended use of alternate swabbing of 10% NaOH and 10% HNO(3) on the obliterated surfaces for obtaining the desired results. The NaOH etchant responsible for bringing back the original marks resulted in the deposition of some dark coating that has masked the recovered marks. The coating had been well removed by dissolving it in HNO(3) containing 10-20% acid. However, the above etching procedure was not effective on aluminium (99% purity) and Al-Zn-Mg-Cu alloy surfaces. Also the two reagents (i) immersion in 10% aq. phosphoric acid and (ii) alternate swabbing of 60% HCl and 40% NaOH suggested earlier for high strength Al-Zn-Mg-Cu alloys [23] were quite ineffective on Al-Si alloys. Thus different aluminium alloys needed different etching treatments for successfully restoring the obliterated marks. Al-Si alloys used in casting find wide applications especially in the manufacture of engine blocks of motor vehicles. Hence, the results presented in this paper are of much relevance in serial number restoration problems involving this alloy. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

KSC-03pd1234

NASA Image and Video Library

2003-04-24

KENNEDY SPACE CENTER, FLA. - Jim Lloyd, with the Mars Exploration Rover (MER) program, points to the place on MER-1 where he will place a computer chip with about 35,000 laser-engraved signatures of visitors to the rovers at the Jet Propulsion Laboratory. The signatures include those of senators, artists, and John Glenn. The identical Mars rovers are scheduled to launch June 5 and June 25 from Cape Canaveral Air Force Station.

KSC-03pd1233

NASA Image and Video Library

2003-04-24

KENNEDY SPACE CENTER, FLA. - This hand points to the place on the Mars Exploration Rover 1 where a computer chip with about 35,000 laser-engraved signatures of visitors to the Jet Propulsion Laboratory will be placed. The first rover already has one. The signatures include those of senators, artists, and John Glenn. The identical Mars rovers are scheduled to launch June 5 and June 25 from Cape Canaveral Air Force Station.

Le grand séisme de Huaxian (1556) : quelques documents chinois

NASA Astrophysics Data System (ADS)

Poirier, Jean-Paul

2017-03-01

The strong earthquake that struck Shaanxi, Shanxi and several other Chinese provinces in 1556 is generally considered as the deadliest of all earthquakes. It is said that the Chinese annals reported 830,000 casualties. We give here a translation into French of the relevant passage of the annals, as well as of a testimony of a survivor Qin Keda, and of a text engraved on a stela.

Tailoring the electrode-electrolyte interface of Solid Oxide Fuel Cells (SOFC) by laser micro-patterning to improve their electrochemical performance

NASA Astrophysics Data System (ADS)

Cebollero, J. A.; Lahoz, R.; Laguna-Bercero, M. A.; Larrea, A.

2017-08-01

Cathode activation polarisation is one of the main contributions to the losses of a Solid Oxide Fuel Cell. To reduce this loss we use a pulsed laser to modify the surface of yttria stabilized zirconia (YSZ) electrolytes to make a corrugated micro-patterning in the mesoscale. The beam of the laser source, 5 ns pulse width and emitting at λ = 532 nm (green region), is computer-controlled to engrave the selected micro-pattern on the electrolyte surface. Several laser scanning procedures and geometries have been tested. Finally, we engrave a square array with 28 μm of lattice parameter and 7 μm in depth on YSZ plates. With these plates we prepare LSM-YSZ/YSZ/LSM-YSZ symmetrical cells (LSM: La1-xSrxMnO3) and determine their activation polarisation by Electrochemical Impedance Spectroscopy (EIS). To get good electrode-electrolyte contact after sintering it is necessary to use pressure-assisted sintering with low loads (about 5 kPa), which do not modify the electrode microstructure. The decrease in polarisation with respect to an unprocessed cell is about 30%. EIS analysis confirms that the reason for this decrease is an improvement in the activation processes at the electrode-electrolyte interface.

1-Octen-3-ol is repellent to Ips pini (Coleoptera: Curculionidae: Scolytinae) in the midwestern United States

Treesearch

Therese M. Poland; Tina M. Pureswaran Deepa S. Ciaramitaro; John H. Borden

2009-01-01

In field experiments at three sites in Michigan and Ohio we tested the activity of 1-octen-3-ol in combination with ipsdienol, the aggregation pheromone of the pine engraver, Ips pini (Say). When 1-octen-3-ol was added to funnel traps baited with ipsdienol, significantly fewer beetles of either sex were captured than in traps baited with ipsdienol...

A graphite oxide (GO)-based remote readable tamper evident seal

DOE PAGES

Cattaneo, Alessandro; Bossert, Jason Andrew; Guzman, Christian; ...

2016-09-08

Here, this paper presents a prototype of a remotely readable graphite oxide (GO) paper-based tamper evident seal. The proposed device combines the tunable electrical properties offered by reduced graphite oxide (RGO) with a compressive sampling scheme. The benefit of using RGO as a tamper evident seal material is the sensitivity of its electrical properties to the common mechanisms adopted to defeat tamper-evident seals. RGO’s electrical properties vary upon local stress or cracks induced by mechanical action (e.g., produced by shimming or lifting attacks). Further, modification of the seal’s electrical properties can result from the incidence of other defeat mechanisms, suchmore » as temperature changes, solvent treatment and steam application. The electrical tunability of RGO enables the engraving of a circuit on the area of the tamper evident seal intended to be exposed to malicious attacks. The operation of the tamper evident seal, as well as its remote communication functionality, is supervised by a microcontroller unit (MCU). The MCU uses the RGO-engraved circuitry to physically implement a compressive sampling acquisition procedure. The compressive sampling scheme provides the seal with self-authentication and self-state-of-health awareness capabilities. Finally, the prototype shows potential for use in low-power, embedded, remote-operation nonproliferation security related applications.« less

Importance of log size on host selection and reproductive success of Ips pini (Coleoptera: Scolytidae) in ponderosa pine slash of northern Arizona and western Montana

Treesearch

Brytten E. Steed; Michael R. Wagner

2004-01-01

Pine engraver, Ips pini (Say), often use thinning slash, and their populations are known to be influenced by the condition of this material. In our study, we evaluated the importance of three log diameters (5, 10, and 20 cm) and three lengths (60, 120, and 240 cm) on various parameters of bark beetle host attack, development, and emergence....

Energy and Process Optimization and Benchmarking of Army Industrial Processes

DTIC Science & Technology

2006-09-01

casting is a metal part formed by pouring molten iron, steel, aluminum, zinc , titanium, magnesium, copper, brass, bronze or cobalt, in nearly all...blanketing techniques. The loss of high-priced alloys is also mini- mized, while slag or dross rates are cut in half to help decrease disposal costs...fabricated of iron and steel; hot dip coating such items with aluminum, lead, or zinc ; retin- ning cans and utensils; (3) engraving, chasing and

Protocol Handbook,

DTIC Science & Technology

1985-04-01

all invitations should be handwritten in black ink and addressed in the full name of the husband and wife unless the guest is single. Requesting an...34 is handwritten in black ink . If the reply is by telephone, the number is written directly beneath the R.S.V.P. (or a separate response card may be...styles. The card should be engraved with black ink on excellent quality card stock (usually white or cream in color). Script lettering is the most

The Faces of Saturn: Images and Texts from Augustus through Dürer to Galileo

NASA Astrophysics Data System (ADS)

Shank, M. H.

2013-04-01

This paper follows the thread(s) of Saturn in astrology and art from the Babylonians to Galileo, paying special attention to the planet's political importance from Augustus to the Medici and to its medical/psychological significance from Ficino through Dürer. In passing, I extend David Pingree's astrological interpretation of Dürer's Melencholia I and propose a very personal rationale for the engraving, namely as a memorial to his mother.

Colours in black and white: the depiction of lightness and brightness in achromatic engravings before the invention of photography.

PubMed

Zavagno, Daniele; Massironi, Manfredo

2006-01-01

What is it like to see the world in black and white? In the pioneer days of cinema, when movies displayed grey worlds, was it true that no 'colours' were actually seen? Did every object seen in those projections appear grey in the same way? The answer is obviously no--people in those glorious days were seeing a world full of light, shadows, and objects in which colours were expressed in terms of lightness. But the marvels of grey worlds have not always been so richly displayed. Before the invention of photography, the depiction of scenes in black-and-white had to face some technical and perceptual challenges. We have studied the technical and perceptual constraints that XV-XVIII century engravers had to face in order to translate actual colours into shades of grey. An indeterminacy principle is considered, according to which artists had to prefer the representation of some object or scene features over others (for example brightness over lightness). The reasons for this lay between the kind of grey scale technically available and the kind of information used in the construction of 3-D scenes. With the invention of photography, photomechanical reproductions, and new printing solutions, artists had at their disposal a continuous grey scale that greatly reduces the constraints of the indeterminacy principle.

Hybrid soft-lithography/laser machined microchips for the parallel generation of droplets†

PubMed Central

Muluneh, M.

2015-01-01

Microfluidic chips have been developed to generate droplets and microparticles with control over size, shape, and composition not possible using conventional methods. However, it has remained a challenge to scale-up production for practical applications due to the inherently limited throughput of micro-scale devices. To address this problem, we have developed a self-contained microchip that integrates many (N = 512) micro-scale droplet makers. This 3 × 3 cm2 PDMS microchip consists of a two-dimensional array of 32 × 16 flow-focusing droplet makers, a network of flow channels that connect them, and only two inputs and one output. The key innovation of this technology is the hybrid use of both soft-lithography and direct laser-micromachining. The microscale resolution of soft lithography is used to fabricate flow-focusing droplet makers that can produce small and precisely defined droplets. Deeply engraved (h ≈ 500 μm) laser-machined channels are utilized to supply each of the droplet makers with its oil phase, aqueous phase, and access to an output channel. The engraved channels' low hydrodynamic resistance ensures that each droplet maker is driven with the same flow rates for highly uniform droplet formation.To demonstrate the utility of this approach, water droplets (d ≈ 80 μm) were generated in hexadecane on both 8 × 1 and 32 × 16 geometries. PMID:24166156

[Epitaphs and the history of medicine].

PubMed

Işli, H N

1995-01-01

Ottomans always paid importance to tombstones all through their history. They engraved epitaphs and epigraphs on each building, edifice, fountain, mausoleum, tombstone etc. they made. Nonetheless, only the 15 percent of all Ottoman epitaph heritage ranging over three continents have been studied and published. Those concerning the history of medicine enable historians to make comparisons shedding light upon the actual knowledge on the field of medicine in the past. This article covers six tombstones of the Ottoman health personnel.

Two-layer Lab-on-a-chip (LOC) with passive capillary valves for mHealth medical diagnostics.

PubMed

Balsam, Joshua; Bruck, Hugh Alan; Rasooly, Avraham

2015-01-01

There is a new potential to address needs for medical diagnostics in Point-of-Care (PoC) applications using mHealth (Mobile computing, medical sensors, and communications technologies for health care), a mHealth based lab test will require a LOC to perform clinical analysis. In this work, we describe the design of a simple Lab-on-a-chip (LOC) platform for mHealth medical diagnostics. The LOC utilizes a passive capillary valve with no moving parts for fluid control using channels with very low aspect ratios cross sections (i.e., channel width ≫ height) achieved through transitions in the channel geometry via that arrest capillary flow. Using a CO2 laser in raster engraving mode, we have designed and fabricated an eight-channel LOC for fluorescence signal detection fabricated by engraving and combining just two polymer layers. Each of the LOC channels is capable of mixing two reagents (e.g., enzyme and substrate) for various assays. For mHealth detection, we used a mobile CCD detector equipped with LED multispectral illumination in the red, green, blue, and white range. This technology enables the development of low-cost LOC platforms for mHealth whose fabrication is compatible with standard industrial plastic fabrication processes to enable mass production of mHealth diagnostic devices, which may broaden the use of LOCs in PoC applications, especially in global health settings.

KSC-03pd1230

NASA Image and Video Library

2003-04-24

KENNEDY SPACE CENTER, FLA. - This closeup shows the size of the computer chip that holds about 35,000 laser-engraved signatures of visitors to the Mars Exploration Rovers at the Jet Propulsion Laboratory. It will be placed on the second rover to be launched to Mars; the first rover already has one. The signatures include those of senators, artists, and John Glenn. The identical Mars rovers are scheduled to launch June 5 and June 25 from Cape Canaveral Air Force Station.

KSC-03pd1232

NASA Image and Video Library

2003-04-24

KENNEDY SPACE CENTER, FLA. - Jim Lloyd, with the Mars Exploration Rover program, holds a computer chip with about 35,000 laser-engraved signatures of visitors to the Jet Propulsion Laboratory. The chip will be placed on the second rover to be launched to Mars (MER-1/MER-B); the first rover already has one. The signatures include those of senators, artists, and John Glenn. The identical Mars rovers are scheduled to launch June 5 and June 25 from Cape Canaveral Air Force Station.

Primer Output and Initial Projectile Motion for 5.56- and 7.62-mm Ammunition

DTIC Science & Technology

2015-09-01

brisance, bore resistance, engraving, interior ballistics 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT UU 18. NUMBER OF PAGES 28 19a...protrudes from the muzzle of the barrel. This arrangement is shown schematically in Fig. 2. Even with this extremely shortened bore travel, the barrel...is not much longer than the bullet’s full- bore body length. Therefore, careful analysis is needed to determine when the bullet is first in contact

Coordinated gene expression for pheromone biosynthesis in the pine engraver beetle, Ips pini (Coleoptera: Scolytidae)

NASA Astrophysics Data System (ADS)

Keeling, Christopher I.; Blomquist, Gary J.; Tittiger, Claus

In several pine bark beetle species, phloem feeding induces aggregation pheromone production to coordinate a mass attack on the host tree. Male pine engraver beetles, Ips pini (Say) (Coleoptera: Scolytidae), produce the monoterpenoid pheromone component ipsdienol de novo via the mevalonate pathway in the anterior midgut upon feeding. To understand how pheromone production is regulated in this tissue, we used quantitative real-time PCR to examine feeding-induced changes in gene expression of seven mevalonate pathway genes: acetoacetyl-coenzyme A thiolase, 3-hydroxy-3-methylglutaryl coenzyme A synthase, 3-hydroxy-3-methylglutaryl coenzyme A reductase, mevalonate 5-diphosphate decarboxylase, isopentenyl-diphosphate isomerase, geranyl-diphosphate synthase (GPPS), and farnesyl-diphosphate synthase (FPPS). In males, expression of all these genes significantly increased upon feeding. In females, the expression of the early mevalonate pathway genes (up to and including the isomerase) increased significantly, but the expression of the later genes (GPPS and FPPS) was unaffected or decreased upon feeding. Thus, feeding coordinately regulates expression of the mevalonate pathway genes necessary for pheromone biosynthesis in male, but not female, midguts. Furthermore, basal mRNA levels were 5- to 41-fold more abundant in male midguts compared to female midguts. This is the first report of coordinated regulation of mevalonate pathway genes in an invertebrate model consistent with their sex-specific role in de novo pheromone biosynthesis.

Investigation of a Putative Estrogen-Imprinting Gene, Phosphodiesterase Type IV Variant (Pde4d4), in Determining Prostate Cancer Risk

DTIC Science & Technology

2008-04-01

margins ” of one’s genetic make-up. Keywords DNAmethylation . Histone modification . Chromatin remodeling . Nongenomic heritage . Developmental plasticity...palliative care to personalized preventive medicine which could be based, in part, on the epigenetic marks engraved along the “book- margins ” of one’s...investigations. Other demands for successful utilization of RLGS are he requirements for a fairly elaborate gel electrophoresis set-up and a powerful mage

KSC-01pp1542

NASA Image and Video Library

2001-09-17

KENNEDY SPACE CENTER, Fla. -- An aerial view of the KSC Visitor Complex shows the Astronauts Memorial Space Mirror in the foreground. Names of the 17 American astronauts who gave their lives to the quest to explore space are engraved in the mirror-finished surface. Sunlight projecting through the names appears to emblazon them against a reflection of the sky. Behind the mirror is the Center for Space Education. In the background is the Rocket Garden, exhibiting early rockets from the space program

The Chronicles Wall

NASA Image and Video Library

2017-05-03

Brass plaques engraved with the names of "The Chroniclers" create a roll of honor on the wall at the NASA News Center at Kennedy Space Center in Florida. In this facility reporters from television, radio, print and online media outlets have monitored countless launches, landings and other space events in order to deliver the news to the world. The Chroniclers program recognizes retirees of the news and communications business who helped spread news of American space exploration from Kennedy Space Center for ten years or more.

The Chronicles Wall

NASA Image and Video Library

2017-05-03

Brass plaques engraved with the names of "The Chroniclers" adorn the wall at the NASA News Center at Kennedy Space Center in Florida. In the foreground are rows of stations where reporters from television, radio, print and online media outlets have monitored countless launches, landings and other space events in order to deliver the news to the world. The Chroniclers program recognizes retirees of the news and communications business who helped spread news of American space exploration from Kennedy Space Center for ten years or more.

A Study of the Engraving of the M855 5.56-mm Projectile

DTIC Science & Technology

2009-03-01

handgun , and shotgun cleaning kit and bore brushes. At the start of a test, a bullet was placed into the barrel so that it made contact with the...interaction with the forcing cone, it cannot be determined if that material remained on the forcing cone or was transferred further down the barrel ...The load vs. displacement plots of figures 6–12 do not show any load spikes further down the barrel to indicate a build up and release of material

2018 Chroniclers

NASA Image and Video Library

2018-05-04

Brass strips engraved with the names of Craig Covault and George Diller were unveiled during a ceremony at Kennedy Space Center’s NASA News Center in Florida on Friday, May 4. Covault covered approximately 100 space shuttle launches and missions during his 48-year career. Diller was known by many as “The Voice of Kennedy Launch Control” during his 37-year career in NASA Public Affairs. “Chroniclers” recognizes retirees of the news and communications business who helped spread news of American space exploration from Kennedy for 10 years or more.

Resonant Cavity Enhanced On-Chip Raman Spectrometer Array with Precisely Positioned Metallic Nano-Gaps for Single Molecule Detection

DTIC Science & Technology

2011-03-22

the nanogaps are engraved on. Simulations show that smaller diameters of the nanowires should provide higher enhancement factors for SERS signal...Inverted Microscope with lasers of wavelengths of 512 to 633 nm as the excitation source. The signal was collected and analyzed by a 50cm Spectrometer...the optical path which can selectively pass the Raman signals and reject the excitation lasers . Figure 2.12 Custom built Raman microscope for the

An Early Instance of Upper Palaeolithic Personal Ornamentation from China: The Freshwater Shell Bead from Shuidonggou 2.

PubMed

Wei, Yi; d'Errico, Francesco; Vanhaeren, Marian; Li, Feng; Gao, Xing

2016-01-01

We report the discovery and present a detailed analysis of a freshwater bivalve from Shuidonggou Locality 2, layer CL3. This layer is located c. 40 cm below layer CL2, which has yielded numerous ostrich eggshell beads. The shell is identified as the valve of a Corbicula fluminea. Data on the occurrence of this species in the Shuidonggou region during Marine Isotope Stage 3 and taphonomic analysis, conducted in the framework of this study, of a modern biocoenosis and thanatocoenosis suggest that the archeological specimen was collected at one of the numerous fossil or sub-fossil outcrops where valves of this species were available at the time of occupation of level CL3. Experimental grinding and microscopic analysis of modern shells of the same species indicate that the Shuidonggou shell was most probably ground on coarse sandstone to open a hole on its umbo, attach a thread, and use the valve as a personal ornament. Experimental engraving of freshwater shells and microscopic analysis identify an incision crossing the archaeological valve outer surface as possible deliberate engraving. Reappraisal of the site chronology in the light of available radiocarbon evidence suggests an age of at least 34-33 cal kyr BP for layer CL3. Such estimate makes the C. fluminea recovered from CL3 one of the earliest instances of personal ornamentation and the earliest example of a shell bead from China.

Surface-plasmon-enhanced photoluminescence of quantum dots based on open-ring nanostructure array

NASA Astrophysics Data System (ADS)

Kannegulla, Akash; Liu, Ye; Cheng, Li-Jing

2016-03-01

Enhanced photoluminescence (PL) of quantum dots (QD) in visible range using plasmonic nanostructures has potential to advance several photonic applications. The enhancement effect is, however, limited by the light coupling efficiency to the nanostructures. Here we demonstrate experimentally a new open-ring nanostructure (ORN) array 100 nm engraved into a 200 nm thick silver thin film to maximize light absorption and, hence, PL enhancement at a broadband spectral range. The structure is different from the traditional isolated or through-hole split-ring structures. Theoretical calculations based on FDTD method show that the absorption peak wavelength can be adjusted by their period and dimension. A broadband absorption of about 60% was measured at the peak wavelength of 550 nm. The emission spectrum of CdSe/ZnS core-shell quantum dots was chosen to match the absorption band of the ORN array to enhance its PL. The engraved silver ORN array was fabricated on a silver thin film deposited on a silicon substrate using focus ion beam (FIB) patterning. The device was characterized by using a thin layer of QD water dispersion formed between the ORN substrate and a cover glass. The experimental results show the enhanced PL for the QD with emission spectrum overlapping the absorption band of ORN substrate and quantum efficiency increases from 50% to 70%. The ORN silver substrate with high absorption over a broadband spectrum enables the PL enhancement and will benefit applications in biosensing, wavelength tunable filters, and imaging.

Off surface matrix based on-chip electrochemical biosensor platform for protein biomarker detection in undiluted serum.

PubMed

Arya, Sunil K; Kongsuphol, Patthara; Park, Mi Kyoung

2017-06-15

The manuscript describes a concept of using off surface matrix modified with capturing biomolecule for on-chip electrochemical biosensing. 3D matrix made by laser engraving of polymethyl methacrylate (PMMA) sheet as off surface matrix was integrated in very close vicinity of the electrode surface. Laser engraving and holes in PMMA along with spacing from surface provide fluidic channel and incubation chamber. Covalent binding of capturing biomolecule (anti-TNF-α antibody) on off-surface matrix was achieved via azide group activity of 4-fluoro-3-nitro-azidobenzene (FNAB), which act as cross-linker and further covalently binds to anti-TNF-α antibody via thermal reaction. Anti-TNF-α/FNAB/PMMA matrix was then integrated over comb structured gold electrode array based sensor chip. Separate surface modification followed by integration of sensor helped to prevent the sensor chip surface from fouling during functionalization. Nonspecific binding was prevented using starting block T20 (PBS). Results for estimating protein biomarker (TNF-α) in undiluted serum using Anti-TNF-α/FNAB/PMMA/Au reveal that system can detect TNF-α in 100pg/ml to 100ng/ml range with high sensitivity of 119nA/(ng/ml), with negligible interference from serum proteins and other cytokines. Thus, use of off surface matrix may provide the opportunity to electrochemically sense biomarkers sensitively to ng/ml range with negligible nonspecific binding and false signal in undiluted serum. Copyright © 2016 Elsevier B.V. All rights reserved.

Light-Sharing Interface for dMiCE Detectors Using Sub-Surface Laser Engraving

PubMed Central

Hunter, William C. J.; Miyaoka, Robert S.; MacDonald, Lawrence; McDougald, Wendy; Lewellen, Thomas K.

2015-01-01

We have previously reported on dMiCE, a method of resolving depth or interaction (DOI) in a pair of discrete crystals by encoding light sharing properties as a function of depth in the interface of a crystal-element pair. A challenge for this method is the cost and repeatability of interface treatment for each crystal pair. In this work, we report our preliminary results on using sub-surface laser engraving (SSLE) as a means of forming this depth-dependent interface in a dMiCE detector. A surplus first-generation SSLE system was used to create a partially reflective layer 100-microns thick at the boundary between two halves of a 1.4-by-2.9-by-20 mm3 LYSO crystal. The boundary of these paired crystal elements was positioned between two 3-mm wide Silicon photomultiplier arrays. The responses of these two photodetectors were acquired for an ensemble of 511-keV photons collimated to interact at a fixed depth in just one crystal element. Interaction position was then varied to measure detector response as a function of depth, which was then used to maximum-likelihood positions. Despite use of sub-optimal SSLE processing we found an average DOI resolution of 3.4 mm for front-sided readout and 3.9 mm for back-sided readout while obtaining energy resolutions on the order of 10%. We expect DOI resolution can be improved significantly by optimizing the SSLE process and pattern. PMID:25914421

Light-Sharing Interface for dMiCE Detectors using Sub-Surface Laser Engraving.

PubMed

Hunter, William C J; Miyaoka, Robert S; MacDonald, Lawrence; McDougald, Wendy; Lewellen, Thomas K

2013-10-01

We have previously reported on dMiCE, a method of resolving depth or interaction (DOI) in a pair of discrete crystals by encoding light sharing properties as a function of depth in the interface of this crystal-element pair. A challenge for this method is the cost and repeatability of interface treatment for a crystal pair. In this work, we report our preliminary results on using sub-surface laser engraving (SSLE) as a means of forming this depth-dependent interface in a dMiCE detector. A surplus first-generation SSLE system was used to create a partially reflective layer 100-microns thick at the boundary between two halves of a 1.4-by-2.9-by-20 mmˆ3 LYSO crystal. The boundary of these paired crystal elements was positioned between two 3-mm wide Geiger-Müller avalanche photodiodes from Hamamatsu. The responses of these two photodetectors were acquired for an ensemble of 511-keV photons collimated to interact at a fixed depth in just one crystal element. Interaction position was then varied to measure detector response as a function of depth, which was then used to maximum-likelihood positions events. Despite use of sub-optimal SSLE processing we found an average DOI resolution of 3.4 mm for front-sided readout and 3.9 mm for back-sided readout. We expect DOI resolution can be improved significantly by optimizing the SSLE process and pattern.

Light-Sharing Interface for dMiCE Detectors using Sub-Surface Laser Engraving

PubMed Central

Hunter, William C.J.; Miyaoka, Robert S.; MacDonald, Lawrence; McDougald, Wendy; Lewellen, Thomas K.

2014-01-01

We have previously reported on dMiCE, a method of resolving depth or interaction (DOI) in a pair of discrete crystals by encoding light sharing properties as a function of depth in the interface of this crystal-element pair. A challenge for this method is the cost and repeatability of interface treatment for a crystal pair. In this work, we report our preliminary results on using sub-surface laser engraving (SSLE) as a means of forming this depth-dependent interface in a dMiCE detector. A surplus first-generation SSLE system was used to create a partially reflective layer 100-microns thick at the boundary between two halves of a 1.4-by-2.9-by-20 mmˆ3 LYSO crystal. The boundary of these paired crystal elements was positioned between two 3-mm wide Geiger-Müller avalanche photodiodes from Hamamatsu. The responses of these two photodetectors were acquired for an ensemble of 511-keV photons collimated to interact at a fixed depth in just one crystal element. Interaction position was then varied to measure detector response as a function of depth, which was then used to maximum-likelihood positions events. Despite use of sub-optimal SSLE processing we found an average DOI resolution of 3.4 mm for front-sided readout and 3.9 mm for back-sided readout. We expect DOI resolution can be improved significantly by optimizing the SSLE process and pattern. PMID:25506194

Light-Sharing Interface for dMiCE Detectors Using Sub-Surface Laser Engraving.

PubMed

Hunter, William C J; Miyaoka, Robert S; MacDonald, Lawrence; McDougald, Wendy; Lewellen, Thomas K

2015-02-06

We have previously reported on dMiCE, a method of resolving depth or interaction (DOI) in a pair of discrete crystals by encoding light sharing properties as a function of depth in the interface of a crystal-element pair. A challenge for this method is the cost and repeatability of interface treatment for each crystal pair. In this work, we report our preliminary results on using sub-surface laser engraving (SSLE) as a means of forming this depth-dependent interface in a dMiCE detector. A surplus first-generation SSLE system was used to create a partially reflective layer 100-microns thick at the boundary between two halves of a 1.4-by-2.9-by-20 mm 3 LYSO crystal. The boundary of these paired crystal elements was positioned between two 3-mm wide Silicon photomultiplier arrays. The responses of these two photodetectors were acquired for an ensemble of 511-keV photons collimated to interact at a fixed depth in just one crystal element. Interaction position was then varied to measure detector response as a function of depth, which was then used to maximum-likelihood positions. Despite use of sub-optimal SSLE processing we found an average DOI resolution of 3.4 mm for front-sided readout and 3.9 mm for back-sided readout while obtaining energy resolutions on the order of 10%. We expect DOI resolution can be improved significantly by optimizing the SSLE process and pattern.

Archaeometric study on minting dies produced under papal rule in Ferrara

NASA Astrophysics Data System (ADS)

Monticelli, Cecilia; Balbo, Andrea; Vaccaro, Carmela; Gulinelli, Maria Teresa; Garagnani, Gian Luca

2013-12-01

In the Civic Museum of Palazzo Schifanoia in Ferrara, a collection of 1104 coin striking tools is stored. Among these, eight steel dies produced from the 2nd decade of the seventeenth to the half of the eighteenth century, representative of the whole period of activity of the papal mint in Ferrara, have been chosen and studied. In that period, while important innovations in the coin minting technique were introduced in Europe, Ferrara declined from the rank of ducal mint to that of peripheral minting center of the highly centralized Papal States. The dies have been characterized by metallographic, chemical, and microhardness investigations. The results suggest that the dies were obtained by a manual smithing technique consisting in hammer hot forging. The die quality improved with time. In fact, in the period 1619-1622, a hardening treatment for the engraved die end consisting in a simple local carburization coexisted with a more efficient production method, based on the application of a proper final heat treatment. This treatment induced a graded microstructure from the engraved end, with a hard martensitic or bainitic structure, to the opposite end, with a tough ferritic/pearlitic structure. From 1675 onward, the latter production method was applied on all the studied dies. The chemical analysis of the alloys suggest that they were likely obtained from iron ores with a common provenance, while the analysis of the slag inclusions suggests the adoption of a direct method of ironmaking throughout the activity period of the mint.

KSC-03pd1231

NASA Image and Video Library

2003-04-24

KENNEDY SPACE CENTER, FLA. - Tom Shain, the MER ATLO logistics manager, holds a computer chip with about 35,000 laser-engraved signatures of visitors to the Mars Exploration Rovers at the Jet Propulsion Laboratory. He and Jim Lloyd, also with the program, will place the chip on the second rover to be launched to Mars (MER-1/MER-B); the first rover already has one. The signatures include those of senators, artists, and John Glenn. The identical Mars rovers are scheduled to launch June 5 and June 25 from Cape Canaveral Air Force Station.

Archeological Testing at Two Sites Near White Castle, Iberville Parish, Louisiana: 16 IV 147 and 16 IV 149

DTIC Science & Technology

1988-07-26

McIntire (1958: Plate 13) reported on work conducted at the Clara Murray Site (16 IV 12), also located just north of the town of Bayou Goula. Two...as early as 1750, but it only was applied as over-glaze decoration until post- 1760. This process started with a design engraved on copper plating ...Once the plate was covered with paint, tissue paper was placed over it, transferring the design to the paper, which in turn was transferred to the

GEOS-20 m cable boom mechanism

NASA Technical Reports Server (NTRS)

Schmidt, B. K.; Suttner, K.

1977-01-01

The GEOS cable boom mechanism allows the controlled deployment of a 20 m long cable in a centrifugal force field. In launch configuration the flat cable is reeled on a 240 mm diameter drum. The electrical connection between the rotating drum and the stationary housing is accomplished via a flexlead positioned inside the drum. Active motion control of this drum is achieved by a self locking worm gear, driven by a stepper motor. The deployment length of the cable is monitored by an optical length indicator, sensing black bars engraved on the cable surface.

A Study of the Yang-gyeong-gyu-il-ui (兩景揆日儀) in the Joseon Dynasty

NASA Astrophysics Data System (ADS)

Lee, Yong Sam; Kim, Sang Hyuk; Mihn, Byeong-Hee

2015-03-01

The Yang-gyeong-gyu-il-ui (兩景揆日儀) is a kind of elevation sundial using three wooden plates. Sang-hyeok Lee (李尙爀, 1810~?) and Byeong-cheol Nam (南秉哲, 1817~1863) gave descriptions of this sundial and explained how to use it in their Gyu-il-go (揆日考) and Ui-gi-jip-seol (儀器輯說), respectively. According to Gyu-il-go (揆日考) there are two horizontal plates and two vertical plates that have lines of season and time. Subseasonal (節候) lines are engraved between seasonal (節氣) lines, subdividing the interval into three equal lines of Cho-hu (初候, early subseason), Jung-hu (中候, mid subseason) and Mal-hu (末候, late subseason); there are 13 seasonal lines for a year, thus resulting in 37 subseasonal lines; also, there are 12 double-hour (時辰) lines for a day engraved on these plates. The only remaining artifact of Yang-gyeong-gyu-il-ui was made in 1849 (the 15th year of Heon-jong) and is kept at the Korea University Museum. We have compared and analyzed Yanggyeong- gyu-il-ui and similar western sundials. Also, we have reviewed the scientific aspect of this artifact and built a replica. Yang-gyeong-gyu-il-ui is a new model enhanced from the miniaturization development in the early Joseon Dynasty and can be applied to the southern part of the tropic line through a structure change.

Estimation of the Latitude, the Gnomon`s Length and Position About Sinbeop-Jipyeong-Ilgu in the Late of Joseon Dynasty

NASA Astrophysics Data System (ADS)

Mihn, Byeong-Hee; Lee, Yong Sam; Kim, Sang Hyuk; Choi, Won-Ho; Ham, Seon Young

2017-06-01

In this study, the characteristics of a horizontal sundial from the Joseon Dynasty were investigated. Korea’s Treasure No. 840 (T840) is a Western-style horizontal sundial where hour-lines and solar-term-lines are engraved. The inscription of this sundial indicates that the latitude (altitude of the north celestial pole) is 37° 39´, but the gnomon is lost. In the present study, the latitude of the sundial and the length of the gnomon were estimated based only on the hour-lines and solar-termlines of the horizontal sundial. When statistically calculated from the convergent point obtained by extending the hourlines, the latitude of this sundial was 37° 15´ ± 26´, which showed a 24´ difference from the record of the inscription. When it was also assumed that a convergent point is changeable, the estimation of the sundial’s latitude was found to be sensitive to the variation of this point. This study found that T840 used a vertical gnomon, that is, perpendicular to the horizontal plane, rather than an inclined triangular gnomon, and a horn-shaped mark like a vertical gnomon is cut on its surface. The length of the gnomon engraved on the artifact was 43.1 mm, and in the present study was statistically calculated as 43.7 ± 0.7 mm. In addition, the position of the gnomon according to the original inscription and our calculation showed an error of 0.3 mm.

A rotational ablation tool for calcified atherosclerotic plaque removal.

PubMed

Kim, Min-Hyeng; Kim, Hyung-Jung; Kim, Nicholas N; Yoon, Hae-Sung; Ahn, Sung-Hoon

2011-12-01

Atherosclerosis is a major cardiovascular disease involving accumulations of lipids, white blood cells, and other materials on the inside of artery walls. Since the calcification found in the advanced stage of atherosclerosis dramatically enhances the mechanical properties of the plaque, restoring the original lumen of the artery remains a challenge. High-speed rotational atherectomy, when performed with an ablating grinder to remove the plaque, produces much better results in the treatment of calcified plaque compared to other methods. However, the high-speed rotation of the Rotablator commercial rotational atherectomy device produces microcavitation, which should be avoided because of the serious complications it can cause. This research involves the development of a high-speed rotational ablation tool that does not generate microcavitation. It relies on surface modification to achieve the required surface roughness. The surface roughness of the tool for differential cutting was designed based on lubrication theory, and the surface of the tool was modified using Nd:YAG laser beam engraving. Electron microscope images and profiles indicated that the engraved surface of the tool had approximately 1 μm of root mean square surface roughness. The ablation experiment was performed on hydroxyapatite/polylactide composite with an elastic modulus similar to that of calcified plaque. In addition, differential cutting was verified on silicone rubber with an elastic modulus similar to that of a normal artery. The tool performance and reliability were evaluated by measuring the ablation force exerted, the size of the debris generated during ablation, and through visual inspection of the silicone rubber surface.

The advances and characteristics of high-power diode laser materials processing

NASA Astrophysics Data System (ADS)

Li, Lin

2000-10-01

This paper presents a review of the direct applications of high-power diode lasers for materials processing including soldering, surface modification (hardening, cladding, glazing and wetting modifications), welding, scribing, sheet metal bending, marking, engraving, paint stripping, powder sintering, synthesis, brazing and machining. The specific advantages and disadvantages of diode laser materials processing are compared with CO 2, Nd:YAG and excimer lasers. An effort is made to identify the fundamental differences in their beam/material interaction characteristics and materials behaviour. Also an appraisal of the future prospects of the high-power diode lasers for materials processing is given.

2018 Chroniclers

NASA Image and Video Library

2018-05-04

Hortense Diggs, deputy director of Kennedy Space Center’s Office of Communication and Public Engagement, delivers remarks during The Chroniclers 2018 ceremony at Kennedy’s NASA News Center in Florida on Friday, May 4. Craig Covault and George Diller were inducted as the 75th and 76th members of the “Chroniclers,” which recognizes retirees of the news and communications business who helped spread news of American space exploration from Kennedy for 10 years or more. Brass strips engraved with each awardee’s name and affiliation were added to the “Chroniclers wall” and unveiled during the event at the NASA News Center.

Characterisation of mineral deposition systems associated with rock art in the Kimberley region of northwest Australia.

PubMed

Green, Helen; Gleadow, Andrew; Finch, Damien

2017-10-01

This data article contains mineralogical and chemical data from mineral accretions sampled from rock art shelters in the Kimberley region of north west Australia. The accretions were collected both on and off pigment and engraved rock art of varying styles observed in the Kimberley with an aim of providing a thorough understanding of the formation and preservation of such materials in the context of dating [1]. This contribution includes processed powder X-ray Diffraction data, Scanning Electron Microscopy energy dispersive spectroscopy data, and Laser Ablation ICP-MS trace element mapping data.

Spring Internship 2018 at the Prototype Development Lab: A place of Dreamers and Makers

NASA Technical Reports Server (NTRS)

Rueda, Juan F.

2018-01-01

This paper covers the role of the design process and the methodology of creating a trophy during my Spring 2018 Internship at the Prototype Development Laboratory at the Kennedy Space Center. In the course of this project I used many new machines and materials while trying to deliver a professional product for a competition that invites college student teams from across the country. The machines covered in this paper include the wood chop saw, CNC mill, water jet, laser engraver, and the 3D printer. This paper also serves as an assembly guide for the trophy.

High-speed measurements of steel-plate deformations during laser surface processing.

PubMed

Jezersek, Matija; Gruden, Valter; Mozina, Janez

2004-10-04

In this paper we present a novel approach to monitoring the deformations of a steel plate's surface during various types of laser processing, e.g., engraving, marking, cutting, bending, and welding. The measuring system is based on a laser triangulation principle, where the laser projector generates multiple lines simultaneously. This enables us to measure the shape of the surface with a high sampling rate (80 Hz with our camera) and high accuracy (+/-7 microm). The measurements of steel-plate deformations for plates of different thickness and with different illumination patterns are presented graphically and in an animation.

Laser micro-etching of metal prostheses for personal identification

PubMed Central

Ganapathy, Dhanraj; Sivaswamy, Vinay; Sekhar, Prathap

2017-01-01

Denture marking techniques play a vital role in establishing personal identification in suitable clinical and forensic situations. The denture marking techniques are categorized broadly into additive and ablative methods. Additive methods involve embedding or impregnation of markers for establishing personal identity. Ablative methods involve partial removal of the denture surface thereby providing a marking for identification. Engraving and etching methods are the commonly used ablative methods. Ablative methods can be of contact and noncontact subtypes. Laser micro-etching is a precise noncontact ablative denture marking technique that could be used for prostheses-guided personal identification. PMID:28584473

Laser micro-etching of metal prostheses for personal identification.

PubMed

Ganapathy, Dhanraj; Sivaswamy, Vinay; Sekhar, Prathap

2017-01-01

Denture marking techniques play a vital role in establishing personal identification in suitable clinical and forensic situations. The denture marking techniques are categorized broadly into additive and ablative methods. Additive methods involve embedding or impregnation of markers for establishing personal identity. Ablative methods involve partial removal of the denture surface thereby providing a marking for identification. Engraving and etching methods are the commonly used ablative methods. Ablative methods can be of contact and noncontact subtypes. Laser micro-etching is a precise noncontact ablative denture marking technique that could be used for prostheses-guided personal identification.

The Chronicles Wall

NASA Image and Video Library

2017-05-03

Brass plaques engraved with the names of Gatha Cottee of NASA Public Affairs, Walter Cronkite of CBS News and Bill Cummins of WEZY Radio are among the list of "The Chroniclers," a roll of honor on the wall at the NASA News Center at Kennedy Space Center in Florida. In this facility reporters from television, radio, print and online media outlets have monitored countless launches, landings and other space events in order to deliver the news to the world. The Chroniclers program recognizes retirees of the news and communications business who helped spread news of American space exploration from Kennedy Space Center for ten years or more.

KSC-03pd1236

NASA Image and Video Library

2003-04-24

KENNEDY SPACE CENTER, FLA. - Jim Lloyd (left) and MER ATLO Logistics Manager Tom Shain shake hands after placing on the Mars Exploration Rover 1 (MER-1) a computer chip with about 35,000 laser-engraved signatures of visitors to the rovers at the Jet Propulsion Laboratory. The signatures include those of senators, artists, and John Glenn. The handshake also represents the passing of the "flame" of logistics job responsibilities at JPL to Lloyd who will be replacing Shain after his retirement. The identical Mars rovers are scheduled to launch June 5 and June 25 from Cape Canaveral Air Force Station.

[Increasing the safety of ceramic femoral heads for hip prostheses].

PubMed

Willmann, G; Pfaff, H G; Richter, H G

1995-12-01

Since 1974 Biolox ceramic femoral ball heads have been used successfully for artificial modular hip joints. The revision rate due to ball head fracture is lower than 0.02%. This is an extremely low value. In this article it is shown how the safety of a ceramic ball head can be improved using the procedures of HIPing, engraving by laser technique, and 100% proof testing. By applying these means the materials properties density, grain size, grain size distribution, and the strength of the ball head, i.e. the fracture load can be improved significantly.

AOM optimization with ultra stable high power CO2 lasers for fast laser engraving

NASA Astrophysics Data System (ADS)

Bohrer, Markus

2015-05-01

A new ultra stable CO2 laser in carbon fibre resonator technology with an average power of more than 600W has been developed especially as basis for the use with AOMs. Stability of linear polarisation and beam pointing stability are important issues as well as appropriate shaping of the incident beam. AOMs are tested close to the laser-induced damage threshold with pulses on demand close to one megahertz. Transversal and rotational optimization of the AOMs benefits from the parallel-kinematic principle of a hexapod used for this research.

Lithography With Metallo-Organic Resists

NASA Astrophysics Data System (ADS)

Pastor, A. C.; Pastor, R. C.; Braunstein, M.; Tangonan, G. L.

1981-02-01

Photolithography with metallo-organic resists is a relatively new addition to photo-engraving technology, and involves the chemical incorporation of inorganic constituents into photopolymerizable organic compounds, so that the photoresist functions not merely as a masking material, as in conventional photolithography, but also as the mass transference vehicle itself. The deposition of thin structured films of metal oxides with this method has been accomplished, the metal-doped resist in each case being the metal acrylate in acrylic acid, except in those cases where the metal acrylate was insoluble. Polymerization was effected with uv irradiation. The criteria for depositing other classes of inorganic compounds are outlined.

The GEOS-20 m Cable Boom Mechanism

NASA Technical Reports Server (NTRS)

Schmidt, G. K.; Suttner, K.

1977-01-01

The GEOS Cable Boom Mechanism which allows the controlled deployment of a 20 m long cable in a centrifugal force field is described. In launch configuration the flat cable is reeled on a 240 mm diameter drum. The electrical connection between the rotating drum and the stationary housing is accomplished via a flexlead positioned inside the drum. Active motion control of this drum is achieved by a self locking worm gear, driven by a stepper motor. The deployment length of the cable is monitored by an optical length indicator, sensing black bars engraved on the cable surface.

6. South View of Whitneyville in Hamden, 1836 by John ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. South View of Whitneyville in Hamden, 1836 by John Warner Barber Photocopied from John Warner Barber, Connecticut Historical Collections (New Haven, 1856), p. 220. 'The engraving... shows the appearance of the little village of Whitneyville, as seen from a few rods south, on the New Haven road.' (Barber, p. 219). The right fork, with Ithiel Town's truss, carries the New Haven & Hartford Turnpike, the left the Cheshire Turnpike. The factory is on the right, the village on the left. - Eli Whitney Armory, West of Whitney Avenue, Armory Street Vicinity, Hamden, New Haven County, CT

Fabrication, testing and modeling of a new flexible armor inspired from natural fish scales and osteoderms.

PubMed

Chintapalli, Ravi Kiran; Mirkhalaf, Mohammad; Dastjerdi, Ahmad Khayer; Barthelat, Francois

2014-09-01

Crocodiles, armadillo, turtles, fish and many other animal species have evolved flexible armored skins in the form of hard scales or osteoderms, which can be described as hard plates of finite size embedded in softer tissues. The individual hard segments provide protection from predators, while the relative motion of these segments provides the flexibility required for efficient locomotion. In this work, we duplicated these broad concepts in a bio-inspired segmented armor. Hexagonal segments of well-defined size and shape were carved within a thin glass plate using laser engraving. The engraved plate was then placed on a soft substrate which simulated soft tissues, and then punctured with a sharp needle mounted on a miniature loading stage. The resistance of our segmented armor was significantly higher when smaller hexagons were used, and our bio-inspired segmented glass displayed an increase in puncture resistance of up to 70% compared to a continuous plate of glass of the same thickness. Detailed structural analyses aided by finite elements revealed that this extraordinary improvement is due to the reduced span of individual segments, which decreases flexural stresses and delays fracture. This effect can however only be achieved if the plates are at least 1000 stiffer than the underlying substrate, which is the case for natural armor systems. Our bio-inspired system also displayed many of the attributes of natural armors: flexible, robust with 'multi-hit' capabilities. This new segmented glass therefore suggests interesting bio-inspired strategies and mechanisms which could be systematically exploited in high-performance flexible armors. This study also provides new insights and a better understanding of the mechanics of natural armors such as scales and osteoderms.

Monumental megalithic burial and rock art tell a new story about the Levant Intermediate Bronze “Dark Ages”

PubMed Central

Barash, Alon; Eisenberg-Degen, Davida; Grosman, Leore; Oron, Maya; Berger, Uri

2017-01-01

The Intermediate Bronze Age (IB) in the Southern Levant (ca. 2350–2000 BCE) is known as the “Dark Ages,” following the collapse of Early Bronze urban society and predating the establishment of the Middle Bronze cities. The absence of significant settlements and monumental building has led to the reconstruction of IB social organization as that of nomadic, tribal society inhabiting rural villages with no central governmental system. Excavation in the Shamir Dolmen Field (comprising over 400 dolmens) on the western foothills of the Golan Heights was carried out following the discovery of rock art engravings on the ceiling of the central chamber inside one of the largest dolmens ever recorded in the Levant. Excavation of this multi-chambered dolmen, covered by a basalt capstone weighing some 50 tons, revealed a secondary multi-burial (of both adults and children) rarely described in a dolmen context in the Golan. Engraved into the rock ceiling above the multi-burial is a panel of 14 forms composed of a vertical line and downturned arc motif. 3D-scanning by structured-light technology was used to sharpen the forms and revealed the technique employed to create them. Building of the Shamir dolmens required a tremendous amount of labor, architectural mastery, and complex socio-economic organization well beyond the capacity of small, rural nomadic groups. The monumental megalithic burial of the Shamir dolmens indicates a hierarchical, complex, non-urban governmental system. This new evidence supports a growing body of recent criticism stemming from new discoveries and approaches that calls for rethinking our views of the Levantine IB “Dark Ages.” PMID:28253312

Monumental megalithic burial and rock art tell a new story about the Levant Intermediate Bronze "Dark Ages".

PubMed

Sharon, Gonen; Barash, Alon; Eisenberg-Degen, Davida; Grosman, Leore; Oron, Maya; Berger, Uri

2017-01-01

The Intermediate Bronze Age (IB) in the Southern Levant (ca. 2350-2000 BCE) is known as the "Dark Ages," following the collapse of Early Bronze urban society and predating the establishment of the Middle Bronze cities. The absence of significant settlements and monumental building has led to the reconstruction of IB social organization as that of nomadic, tribal society inhabiting rural villages with no central governmental system. Excavation in the Shamir Dolmen Field (comprising over 400 dolmens) on the western foothills of the Golan Heights was carried out following the discovery of rock art engravings on the ceiling of the central chamber inside one of the largest dolmens ever recorded in the Levant. Excavation of this multi-chambered dolmen, covered by a basalt capstone weighing some 50 tons, revealed a secondary multi-burial (of both adults and children) rarely described in a dolmen context in the Golan. Engraved into the rock ceiling above the multi-burial is a panel of 14 forms composed of a vertical line and downturned arc motif. 3D-scanning by structured-light technology was used to sharpen the forms and revealed the technique employed to create them. Building of the Shamir dolmens required a tremendous amount of labor, architectural mastery, and complex socio-economic organization well beyond the capacity of small, rural nomadic groups. The monumental megalithic burial of the Shamir dolmens indicates a hierarchical, complex, non-urban governmental system. This new evidence supports a growing body of recent criticism stemming from new discoveries and approaches that calls for rethinking our views of the Levantine IB "Dark Ages."

Legal requirements and guidelines for the control of harmful laser generated particles, vapours and gases

NASA Astrophysics Data System (ADS)

Horsey, John

2015-07-01

This paper is a review of the Health and Safety laws and guidelines relating to laser generated emissions into the workplace and outside environment with emphasis on the differences between legal requirements and guideline advice. The types and nature of contaminants released by various laser processes (i.e. cutting, coding, engraving, marking etc) are discussed, together with the best methods for controlling them to within legal exposure limits. A brief description of the main extract air filtration techniques, including the principles of particulate removal and the action of activated carbon for gas/vapour/odour filtration, is given.

7. Photocopy of map of the Agua Fria Valley and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. Photocopy of map of the Agua Fria Valley and lands to be irrigated by the Agua Fria Water and Land Company. Photographer Mark Durben, 1987 Source: 'Map of the Agua Fria Valley and the Western Portion of the Salt River Valley Showing the System of Reservoirs and Canals of the Agua Fria Water and Land Company and the Land to be Irrigated Thereby 160,000 Acres of New Land to be Reclaimed in the Maricopa County, Arizona Territory,' (Brochure) Union Photo Engraving Company, c. 1895, Salt River Project Research Archives, Tempe, Arizona. - Waddell Dam, On Agua Fria River, 35 miles northwest of Phoenix, Phoenix, Maricopa County, AZ

AGU honored for Antarctic book

NASA Astrophysics Data System (ADS)

AGU has won an honorable mention award at the Fifteenth Annual Awards Program for Excellence in Professional and Scholarly Publishing sponsored by the Association of American Publishers for the book Volcanoes of the Antarctic Plate and Southern Oceans. The book is part of AGU's Antarctic Research Series, an outgrowth of research done during the International Geophysical Year that was begun in 1963 with a grant from the National Science Foundation. The award was presented at the AAP Annual Awards Dinner on February 6 at the Ritz-Carlton Hotel in Washington, D.C. The award consists of a medallion and a plate on which the names of the publisher, title, and authors are engraved.

The Chronicles Wall

NASA Image and Video Library

2017-05-03

A brass plaque engraved with the name of Bruce Hall of CBS News is among the list of "The Chroniclers," a roll of honor on the wall at the NASA News Center at Kennedy Space Center in Florida. Hall, one of six new inductees in 2017, died after a lengthy illness on May 2, 2017. In this facility reporters from television, radio, print and online media outlets have monitored countless launches, landings and other space events in order to deliver the news to the world. The Chroniclers program recognizes retirees of the news and communications business who helped spread news of American space exploration from Kennedy Space Center for ten years or more.

Refractive index and temperature sensitivity characteristics of a micro-slot fiber Bragg grating.

PubMed

Saffari, Pouneh; Yan, Zhijun; Zhou, Kaiming; Zhang, Lin

2012-07-10

Fabrication and characterization of a UV inscribed fiber Bragg grating (FBG) with a micro-slot liquid core is presented. Femtosecond (fs) laser patterning/chemical etching technique was employed to engrave a micro-slot with dimensions of 5.74 μm(h)×125 μm(w)×1388.72 μm(l) across the whole grating. The device has been evaluated for refractive index (RI) and temperature sensitivities and exhibited distinctive thermal response and RI sensitivity beyond the detection limit of reported fiber gratings. This structure has not just been RI sensitive, but also maintained the robustness comparing with the bare core FBGs and long-period gratings with the partial cladding etched off.

Omni-focal refractive focus correction technology as a substitute for bi/multi-focal intraocular lenses, contact lenses, and spectacles

NASA Astrophysics Data System (ADS)

Ben Yaish, Shai; Zlotnik, Alex; Raveh, Ido; Yehezkel, Oren; Belkin, Michael; Lahav, Karen; Zalevsky, Zeev

2009-02-01

We present novel technology for extension in depth of focus of imaging lenses for use in ophthalmic lenses correcting myopia, hyperopia with regular/irregular astigmatism and presbyopia. This technology produces continuous focus without appreciable loss of energy. It is incorporated as a coating or engraving on the surface for spectacles, contact or intraocular lenses. It was fabricated and tested in simulations and in clinical trials. From the various testing this technology seems to provide a satisfactory single-lens solution. Obtained performance is apparently better than those of existing multi/bifocal lenses and it is modular enough to provide solution to various ophthalmic applications.

Methods and Algorithms for Computer-aided Engineering of Die Tooling of Compressor Blades from Titanium Alloy

NASA Astrophysics Data System (ADS)

Khaimovich, A. I.; Khaimovich, I. N.

2018-01-01

The articles provides the calculation algorithms for blank design and die forming fitting to produce the compressor blades for aircraft engines. The design system proposed in the article allows generating drafts of trimming and reducing dies automatically, leading to significant reduction of work preparation time. The detailed analysis of the blade structural elements features was carried out, the taken limitations and technological solutions allowed to form generalized algorithms of forming parting stamp face over the entire circuit of the engraving for different configurations of die forgings. The author worked out the algorithms and programs to calculate three dimensional point locations describing the configuration of die cavity.

Use of lasers in the furniture industry

NASA Astrophysics Data System (ADS)

Wieloch, Grzegorz; Pohl, Piotr

1995-03-01

One of the ways of using laser in industry is its usage in loss treatment of wood and composite wood products. In the furniture industry the above mentioned machining is used in such technological processes in which tool machining (sawing, molding) is not economical or even possible. These processes are mainly curvilinear cutting of layer materials like veneers, plywood, and face layers and thicker materials like particleboards, fiberboards, and lumber- core panels. Wide usage has also been achieved in heat treatment in wood for decoration. It can be calcinating designs, engraving them, blackening of parts of surfaces, or changing of anatomic characteristics of wood tissue. Nevertheless laser usage in recliner cutting seems at present causeless.

[Effect of Radii barrier sleeves on cure depth of composite resin].

PubMed

Wang, Binping; DU, Yongxiu

2009-01-01

To explore the effect of Radii barrier sleeves on the cure depth of composite resin. Cylinder mold was prepared, and the resin was filled strictly into the mold. The surface was flattened and then cured with plastic engraver's knife.The depth of composite resin which was cured by QHL75TM with or without Radii barrier sleeves was compared. The cure depth of composite resin which were cured by QHL75TM with or without Radii barrier sleeves of photo-curing machine was 4.38 mm and 4.27 mm respectively,with no statistical difference. The cure depth of composite resin is not influenced by Radii barrier sleeves under the same light condition.

A New Numerical Simulation technology of Multistage Fracturing in Horizontal Well

NASA Astrophysics Data System (ADS)

Cheng, Ning; Kang, Kaifeng; Li, Jianming; Liu, Tao; Ding, Kun

2017-11-01

Horizontal multi-stage fracturing is recognized the effective development technology of unconventional oil resources. Geological mechanics in the numerical simulation of hydraulic fracturing technology occupies very important position, compared with the conventional numerical simulation technology, because of considering the influence of geological mechanics. New numerical simulation of hydraulic fracturing can more effectively optimize the design of fracturing and evaluate the production after fracturing. This paper studies is based on the three-dimensional stress and rock physics parameters model, using the latest fluid-solid coupling numerical simulation technology to engrave the extension process of fracture and describes the change of stress field in fracturing process, finally predict the production situation.

Real-Time Inspection Of Currency

NASA Astrophysics Data System (ADS)

Blazek, Henry

1986-12-01

An automatic inspection machine, designed and manufactured by the Perkin-Elmer Corporation for the U.S. Bureau of Engraving and Printing, is capable of real-time inspection of currency at rates compatible with the output of modern high-speed printing presses. Inspection is accomplished by comparing test notes (in 32-per-sheet format) with reference notes stored in the memory of a digital computer. This paper describes the development of algorithms for detecting defective notes, one of the key problems solved during the development of the inspection system. Results achieved on an analytical model, used for predicting probability of false alarms and probability of detecting typically defective notes, are compared to those obtained by system simulation.

Frequency-Switchable Metamaterial Absorber Injecting Eutectic Gallium-Indium (EGaIn) Liquid Metal Alloy

PubMed Central

Ling, Kenyu; Kim, Hyung Ki; Yoo, Minyeong; Lim, Sungjoon

2015-01-01

In this study, we demonstrated a new class of frequency-switchable metamaterial absorber in the X-band. Eutectic gallium-indium (EGaIn), a liquid metal alloy, was injected in a microfluidic channel engraved on polymethyl methacrylate (PMMA) to achieve frequency switching. Numerical simulation and experimental results are presented for two cases: when the microfluidic channels are empty, and when they are filled with liquid metal. To evaluate the performance of the fabricated absorber prototype, it is tested with a rectangular waveguide. The resonant frequency was successfully switched from 10.96 GHz to 10.61 GHz after injecting liquid metal while maintaining absorptivity higher than 98%. PMID:26561815

Advances in lenticular lens arrays for visual display

NASA Astrophysics Data System (ADS)

Johnson, R. Barry; Jacobsen, Gary A.

2005-08-01

Lenticular lens arrays are widely used in the printed display industry and in specialized applications of electronic displays. In general, lenticular arrays can create from interlaced printed images such visual effects as 3-D, animation, flips, morph, zoom, or various combinations. The use of these typically cylindrical lens arrays for this purpose began in the late 1920's. The lenses comprise a front surface having a spherical crosssection and a flat rear surface upon where the material to be displayed is proximately located. The principal limitation to the resultant image quality for current technology lenticular lenses is spherical aberration. This limitation causes the lenticular lens arrays to be generally thick (0.5 mm) and not easily wrapped around such items as cans or bottles. The objectives of this research effort were to develop a realistic analytical model, to significantly improve the image quality, to develop the tooling necessary to fabricate lenticular lens array extrusion cylinders, and to develop enhanced fabrication technology for the extrusion cylinder. It was determined that the most viable cross-sectional shape for the lenticular lenses is elliptical. This shape dramatically improves the image quality. The relationship between the lens radius, conic constant, material refractive index, and thickness will be discussed. A significant challenge was to fabricate a diamond-cutting tool having the proper elliptical shape. Both true elliptical and pseudo-elliptical diamond tools were designed and fabricated. The plastic sheets extruded can be quite thin (< 0.25 mm) and, consequently, can be wrapped around cans and the like. Fabrication of the lenticular engraved extrusion cylinder required remarkable development considering the large physical size and weight of the cylinder, and the tight mechanical tolerances associated with the lenticular lens molds cut into the cylinder's surface. The development of the cutting tool and the lenticular engraved extrusion cylinder will be presented in addition to an illustrative comparison of current lenticular technology and the new technology. Three U.S. patents have been issued as a consequence of this research effort.

On astronomical drawing [1846

NASA Astrophysics Data System (ADS)

Smyth, Charles Piazzi

Reprinted from the Memoirs of the Royal Astronomical Society 15, 1846, pp. 71-82. With annotations and illustrations added by Klaus Hentschel. The activities of the Astronomer Royal for Scotland, Charles Piazzi Smyth (1819-1900), include the triangulation of South African districts, landscape painting, day-to-day or tourist sketching, the engraving and lithographing of prominent architectural sites, the documentary photography of the Egyptian pyramids or the Tenerife Dragon tree, and `instant photographs' of the clouds above his retirement home in Clova, Ripon. His colorful records of the aurora polaris, and solar and terrestrial spectra all profited from his trained eye and his subtle mastery of the pen and the brush. As his paper on astronomical drawing, which we chose to reproduce in this volume, amply demonstrates, he was conversant in most of the print technology repertoire that the 19th century had to offer, and carefully selected the one most appropriate to each sujet. For instance, he chose mezzotint for the plates illustrating Maclear's observations of Halley's comet in 1835/36, so as to achieve a ``rich profundity of shadows, the deep obscurity of which is admirably adapted to reproduce those fine effects of chiaroscuro frequently found in works where the quantity of dark greatly predominates.'' The same expertise with which he tried to emulate Rembrandt's chiaroscuro effects he applied to assessing William and John Herschel's illustrations of nebulae, which appeared in print between 1811 and 1834. William Herschel's positive engraving, made partly by stippling and partly by a coarse mezzotint, receives sharp admonishment because of the visible ruled crossed lines in the background and the fact that ``the objects, which are also generally too light, [have] a much better definition than they really possess.'' On the other hand, John Herschel's illustration of nebulae and star clusters, given in negative, ``in which the lights are the darkest part of the picture'', finds his praise.

Polyamide/titania hollow nanofibers prepared by core-shell electrospinning as a microextractive phase in a fabricated sandwiched format microfluidic device.

PubMed

Rezvani, Omid; Hedeshi, Mahin Hashemi; Bagheri, Habib

2017-12-15

In this study, a low-cost microfluidic device from polymethyl methacrylate was fabricated by laser engraving technique. The device is consisted of a central chip unit with an aligned microchannel. Both sides of the engraved microchannel were sandwiched by two synthesized sheets from polyamide/titania (PA/TiO 2 ) hollow nanofibers as extractive phases. The inlet and outlet of the device were connected to the polyether ether ketone tubes, while a peristaltic pump was used to deliver both sample and desorbing solvent through the microchannel. The recorded scanning electron microscopy images from the surface of the synthesized PA/TiO 2 nanofibers, exhibit a good degree of homogeneity and porosity throughout their structures. Also, the presence of titanium was indicated by the energy dispersive X-ray analysis, while the recorded Fourier transform infrared spectra confirmed their chemical structures. The addition of titania in the composition of polyamide nanofibers, not only improved the mechanical stability of the extractive phase but also enhanced its extraction capability. The major parameters associated with the extraction performance were studied and eventually the method was validated by the use of a gas chromatography-mass spectrometry. The limits of detection for the selected triazines were between 0.01 and 0.03ngmL -1 , while the limits of quantification ranged from 0.04 to 0.1ngmL -1 . In addition, the interday and intraday reproducibility (RSD%) were lower than 6.6% (n=3). The calibration graph for atrazine was linear in the range of 0.2-50ngmL -1 while two linear ranges for ametryn and terbutryn (0.1-10 and 20-500ngmL -1 ) were achieved. Relative recoveries were between 89 and 98% with the regression coefficient range of 0.9969-0.9991. Copyright © 2017 Elsevier B.V. All rights reserved.

Self-aliquoting micro-grooves in combination with laser ablation-ICP-mass spectrometry for the analysis of challenging liquids: quantification of lead in whole blood.

PubMed

Nischkauer, Winfried; Vanhaecke, Frank; Limbeck, Andreas

2016-08-01

We present a technique for the fast screening of the lead concentration in whole blood samples using laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS). The whole blood sample is deposited on a polymeric surface and wiped across a set of micro-grooves previously engraved into the surface. The engraving of the micro-grooves was accomplished with the same laser system used for LA-ICP-MS analysis. In each groove, a part of the liquid blood is trapped, and thus, the sample is divided into sub-aliquots. These aliquots dry quasi instantly and are then investigated by means of LA-ICP-MS. For quantification, external calibration against aqueous standard solutions was relied on, with iron as an internal standard to account for varying volumes of the sample aliquots. The (208)Pb/(57)Fe nuclide ratio used for quantification was obtained via a data treatment protocol so far only used in the context of isotope ratio determination involving transient signals. The method presented here was shown to provide reliable results for Recipe ClinChek® Whole Blood Control levels I-III (nos. 8840-8842), with a repeatability of typically 3 % relative standard deviation (n = 6, for Pb at 442 μg L(-1)). Spiked and non-spiked real whole blood was analysed as well, and the results were compared with those obtained via dilution and sectorfield ICP-MS. A good agreement between both methods was observed. The detection limit (3 s) for lead in whole blood was established to be 10 μg L(-1) for the laser ablation method presented here. Graphical Abstract Micro-grooves are filled with whole blood, dried, and analyzed by laser ablation ICP-mass spectrometry. Notice that the laser moves in perpendicular direction with regard to the micro-grooves.

Complete Fabrication of a Traversable 3 µm Thick NbN Film Superconducting Coil with Cu plated layer of 42m in Length in a Spiral Three-Storied Trench Engraved in a Si Wafer of 76.2 mm in Diameter Formed by MEMS Technology for a Compact SMES with High Energy Storage Volume Density

NASA Astrophysics Data System (ADS)

Suzuki, Yasuhiro; Iguchi, Nobuhiro; Adachi, Kazuhiro; Ichiki, Akihisa; Hioki, Tatsumi; Hsu, Che-Wei; Sato, Ryoto; Kumagai, Shinya; Sasaki, Minoru; Noh, Joo-Hyong; Sakurahara, Yuuske; Okabe, Kyohei; Takai, Osamu; Honma, Hideo; Watanabe, Hideo; Sakoda, Hitoshi; Sasagawa, Hiroaki; Doy, Hideyuki; Zhou, Shuliang; Hori, H.; Nishikawa, Shigeaki; Nozaki, Toshihiro; Sugimoto, Noriaki; Motohiro, Tomoyoshi

2017-09-01

Based on the concept of a novel approach to make a compact SMES unit composed of a stack of Si wafers using MEMS process proposed previously, a complete fabrication of a traversable 3 µam thick NbN film superconducting coil lined with Cu plated layer of 42m in length in a spiral three-storied trench engraved in and extended over a whole Si-wafer of 76.2 mm in diameter was attained for the first time. With decrease in temperature, the DC resistivity showed a metallic decrease indicating the current pass was in the Cu plated layer and then made a sudden fall to residual contact resistance indicating the shift of current pass from the Cu plated layer to the NbN film at the critical temperature Tc of 15.5K by superconducting transition. The temperature dependence of I-V curve showed the increase in the critical current with decrease in the temperature and the highest critical current measured was 220 mA at 4K which is five times as large as that obtained in the test fabrication as the experimental proof of concept presented in the previous report. This completion of a one wafer superconducting NbN coil is an indispensable step for the next proof of concept of fabrication of series-connected two wafer coils via superconductive joint which will read to series connected 600 wafer coils finally, and for replacement of NbN by high Tc superconductor such as YBa2Cu3O7-x for operation under the cold energy of liquid hydrogen or liquid nitrogen.

The Reconstruction of Greyfriars Kirkyard’s Sacred Space: From the Franciscan Order’s “Divinity Heaven Garden” into the Protestant’s “the Sacred Cemetery”

NASA Astrophysics Data System (ADS)

Li, Xin; Cao, Lei; Ma, Yifeng

2017-08-01

The Scottish Reformation in the sixteenth century had a profound influence on the layout and function of Greyfriars Kirkyard. Since the Reformation it has been used in various ways such as a public cemetery, a weapon exhibition and military exercises site, and as the Covenanters prison. By exhaustively perusing historical documents, comparing different layouts in Edinburgh antique maps, and analyzing the epitaphs and engraved monuments within the cemetery, I have concluded the reconstructive principles of the sacred space represent three major shifts. The space has moved from sacred to secular from a single faith to multiple denominational and from an oppressive environment to a supportive one.

Intraocular lens employed for cataract surgery

NASA Astrophysics Data System (ADS)

Roszkowska, A. M.; Torrisi, L.

2014-04-01

The aim of this paper is to illustrate the techniques of cataract surgery with implantation of intraocular lenses and some physical properties of the used materials. The new technology, coupled with extensive experience and the studied cases, permits to increase the standardization and accuracy of the engravings, by reducing the use and handling of surgical instruments inside the eye. At present it is possible to replace the cataract with crystalline lenses based on biopolymers such as PMMA, silicone, acrylic hydrophilic and hydrophobic acrylic. These materials are increasingly able to replace the natural lens and to ensure the fully functional of the eye. The role of femtosecond lasers in cataract surgery, to assist or replace several aspects of the manual cataract surgery, are discussed.

John Bell (1763-1820): brother artist and anatomist.

PubMed

Gardner-Thorpe, Christopher

2013-01-01

John Bell, brother-surgeon of Charles Bell, was, like Charles, an outstanding surgeon and a good artist. John was one of the few who illustrated his work with their own drawings in the days before audiovisual aids were available and without the benefit of reliable drawing aids, photography and computer-aided design. Charles, on the other hand, was the better artist and illustrated much of the normal anatomy of the nervous system. Each brother undertook extensive surgery of men who had been wounded in war; John Bell left us his engravings from the textbooks, more numerous perhaps than Charles, but Charles left us a series of oil paintings and watercolours in addition to the illustrations in his textbooks. © 2013 Elsevier B.V. All rights reserved.

Identifying subassemblies by ultrasound to prevent fuel handling error in sodium fast reactors: First test performed in water

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paumel, Kevin; Lhuillier, Christian

2015-07-01

Identifying subassemblies by ultrasound is a method that is being considered to prevent handling errors in sodium fast reactors. It is based on the reading of a code (aligned notches) engraved on the subassembly head by an emitting/receiving ultrasonic sensor. This reading is carried out in sodium with high temperature transducers. The resulting one-dimensional C-scan can be likened to a binary code expressing the subassembly type and number. The first test performed in water investigated two parameters: width and depth of the notches. The code remained legible for notches as thin as 1.6 mm wide. The impact of the depthmore » seems minor in the range under investigation. (authors)« less

Fatigue fracture of a proximally modular, distally tapered fluted implant with diaphyseal fixation.

PubMed

Buttaro, Martín A; Mayor, Michael B; Van Citters, Douglas; Piccaluga, Francisco

2007-08-01

We report and analyze the causes of a fracture in a proximally modular, distally tapered fluted MP stem in a 48-year-old woman (168 cm, 67 kg) with severe proximal bone deficiency. Evidence of fatigue failure with striations initiated laterally was observed in the laser etching of the tensile aspect of the prosthesis. However, metallurgical analysis suggested that laser engraving did not alter the microstructure of the stem. Stress due to the absence of proximal femoral bone support may have been sufficiently high to put this particular stem at risk for fatigue fracture. This important complication should be addressed when choosing this therapeutic option in cases with substantial proximal femoral bone loss. Strut allograft support should be recommended in such cases.

Skylab food system laboratory support

NASA Technical Reports Server (NTRS)

Sanford, D.

1974-01-01

A summary of support activities performed to ensure the quality and reliability of the Skylab food system design is reported. The qualification test program was conducted to verify crew compartment compatibility, and to certify compliance of the food system with nutrition, preparation, and container requirements. Preflight storage requirements and handling procedures were also determined. Information on Skylab food items was compiled including matters pertaining to serving size, preparation information, and mineral, calorie, and protein content. Accessory hardware and the engraving of food utensils were also considered, and a stowage and orientation list was constructed which takes into account menu use sequences, menu items, and hardware stowage restrictions. A food inventory system was established and food thermal storage tests were conducted. Problems and comments pertaining to specific food items carried onboard the Skylab Workshop were compiled.

Open Air Rock Art Between Alva and Ceira Rivers: a Voyage Through Mining, Trading, Transhumance Routes and the Orientation in the Landscape

NASA Astrophysics Data System (ADS)

Pimenta, F.; Ribeiro, N.; Smith, A.; Joaquinito, A.; Pereira, S.; Tirapicos, L.

2015-05-01

Open air rock carvings, the object of the present study, were artistic expressions made by the itinerant shepherds, miners, traders and the resident populations along trading and transhumance routes and nearby areas. These rock art sites were used as markers to denote routes or territorial claims and in some cases may have been associated with ritual celebrations. In this paper we will present the results of the analysis of the orientations in the landscape of 688 engraved outcrops, distributed in 11 mountainous areas between the Alva and Ceira rivers. We will discuss possible solsticial markers and will address a possible relationship between the orientation of the podomorph carvings with the Summer Full Moon or Alpha Centauri.

Collyria seals in the Roman Empire.

PubMed

Perez-Cambrodi, Rafael J; Pinero, David P; Mavrou, Ariadni; Cervino, Alejandro; Brautaset, Rune; Murube del Castillo, Juan

2013-01-01

Roman seals associated with collyria (Latin expression for eye drops/washes and lotions for eye maintenance) provide valuable information about eye care in the antiquity. These small, usually stone-made pieces bore engravings with the names of eye doctors and also the collyria used to treat an eye disease. The collyria seals have been found all over the Roman empire and Celtic territories in particular and were usually associated with military camps. In Hispania (Iberian Peninsula), only three collyria seals have been found. These findings speak about eye care in this ancient Roman province as well as about of the life of the time. This article takes a look at the utility and social significance of the collyria seals and seeks to give an insight in the ophthalmological practice of in the Roman Empire.

Innovative ceramic slab lasers for high power laser applications

NASA Astrophysics Data System (ADS)

Lapucci, Antonio; Ciofini, Marco

2005-09-01

Diode Pumped Solid State Lasers (DPSSL) are gaining increasing interest for high power industrial application, given the continuous improvement in high power diode laser technology reliability and affordability. These sources open new windows in the parameter space for traditional applications such as cutting , welding, marking and engraving for high reflectance metallic materials. Other interesting applications for this kind of sources include high speed thermal printing, precision drilling, selective soldering and thin film etching. In this paper we examine the most important DPSS laser source types for industrial applications and we describe in details the performances of some slab laser configurations investigated at our facilities. The different architectures' advantages and draw-backs are briefly compared in terms of performances, system complexity and ease of scalability to the multi-kW level.

Didymus the blind: an unknown precursor of Louis Braille and Helen Keller.

PubMed

Lascaratos, J; Marketos, S

1994-01-01

The present study presents the case of Didymus the Blind, worthy author, philosopher and theologian of the 4th century AD. Blinded by ophthalmia at the age of four years, Didymus succeeded in achieving great learning in the philosophical and natural sciences. He began his education by using a system which was remarkably like Braille, that is reading letters engraved into the surface of wood by touch and subsequently furthering his knowledge by listening. This learning process of Didymus the Blind appears as the precursor of Louis Braille who invented the educational system of reading embossed dots by touch. Like Didymus, Braille lost his vision in infancy (at three years of age). Another parallel of Didymus' career and written works is found in the example and achievements of Helen Keller.

KSC-2012-1128

NASA Image and Video Library

2012-01-26

CAPE CANAVERAL, Fla. -- The names of U.S. space explorers who have been lost are engraved on the Space Mirror Memorial at the Kennedy Space Center Visitor Complex in Florida. Kennedy Space Center Director Robert Cabana, Deputy Director Janet Petro, and United Space Alliance’s Vice President for Aerospace Services/Florida Site Director Mark Nappi placed a wreath at the memorial during Kennedy’s NASA Day of Remembrance. The Day of Remembrance honors members of the NASA family who lost their lives while furthering the cause of exploration and discovery, including the astronaut crews of Apollo 1 and space shuttles Challenger and Columbia. Kennedy civil service and contractor employees, along with the general public, paid their respects throughout the day. The visitor complex provided flowers for visitors to place at the memorial. Photo credit: NASA/Dimitri Gerondidakis

Crafting the microworld: how Robert Hooke constructed knowledge about small things

PubMed Central

Lawson, Ian

2016-01-01

This paper investigates the way in which Robert Hooke constructed his microscopical observations. His Micrographia is justifiably famous for its detailed engravings, which communicated Hooke's observations of tiny nature to his readers, but less attention has been paid to how he went about making the observations themselves. In this paper I explore the relationship between the materiality of his instrument and the epistemic images he produced. Behind the pictures lies an array of hidden materials, and the craft knowledge it took to manipulate them. By investigating the often counter-theoretical and conflicting practices of his ingenious microscope use, I demonstrate the way in which Hooke crafted the microworld for his readers, giving insight into how early modern microscopy was understood by its practitioners and audience. PMID:27017680

CRAFTING THE MICROWORLD: HOW ROBERT HOOKE CONSTRUCTED KNOWLEDGE ABOUT SMALL THINGS.

PubMed

Lawson, Ian

2016-03-20

This paper investigates the way in which Robert Hooke constructed his microscopical observations. His Micrographia is justifiably famous for its detailed engravings, which communicated Hooke's observations of tiny nature to his readers, but less attention has been paid to how he went about making the observations themselves. In this paper I explore the relationship between the materiality of his instrument and the epistemic images he produced. Behind the pictures lies an array of hidden materials, and the craft knowledge it took to manipulate them. By investigating the often counter-theoretical and conflicting practices of his ingenious microscope use, I demonstrate the way in which Hooke crafted the microworld for his readers, giving insight into how early modern microscopy was understood by its practitioners and audience.

Frequency Representation: Visualization and Clustering of Acoustic Data Using Self-Organizing Maps.

PubMed

Guo, Xinhua; Sun, Song; Yu, Xiantao; Wang, Pan; Nakamura, Kentaro

2017-11-01

Extraction and display of frequency information in three-dimensional (3D) acoustic data are important steps to analyze object characteristics, because the characteristics, such as profiles, sizes, surface structures, and material properties, may show frequency dependence. In this study, frequency representation (FR) based on phase information in multispectral acoustic imaging (MSAI) is proposed to overcome the limit of intensity or amplitude information in image display. Experiments are performed on 3D acoustic data collected from a rigid surface engraved with five different letters. The results show that the proposed FR technique can not only identify the depth of the five letters by the colors representing frequency characteristics but also demonstrate the 3D image of the five letters, providing more detailed characteristics that are unavailable by conventional acoustic imaging.

Exo/Astrobiology in Europe

NASA Astrophysics Data System (ADS)

Brack, André; Horneck, Gerda; Wynn-Williams, David

2001-08-01

The question of the chemical origins of life is engraved in the European scientific patrimony as it can be traced back to the pioneer ideas of Charles Darwin, Louis Pasteur, and more recently to Alexander Oparin. During the last decades, the European community of origin of life scientists has organized seven out of the twelve International Conferences on the Origins of Life held since 1957. This community contributed also to enlarge the field of research to the study of life in extreme environments and to the search for extraterrestrial life, i.e. exobiology in its classical definition or astrobiology if one uses a more NASA-inspired terminology. The present paper aims to describe the European science background in exo/astrobiology as well as the project of a European Network of Exo/Astrobiology.

Investigation on Periodically Surface-Corrugated Long-Period Gratings Inscribed on Photonic Crystal Fibers

NASA Astrophysics Data System (ADS)

Han, Young-Geun

2017-04-01

Transmission characteristics of periodically surface-corrugated long-period gratings (LPGs) inscribed on photonic crystal fibers (PCFs) using a wet-etching technique were experimentally investigated. A conventional wet method was implemented to periodically engrave the silica cladding region of the PCFs resulting in the periodic surface corrugation in the PCF. After applying the external strain to the PCF with the periodic surface micro-ridges, periodic modulation of refractive index based on the photoelastic effect is induced resulting in the formation of the PCF-based LPG. Increasing the applied strain successfully improves the extinction ratio of the resonant peak of the PCF-based LPG without the resonant wavelength shift. We also measured the transmission characteristics of the PCF-based LPG with variations in temperature and ambient index.

[The unicorn and the unicorn horn among apothecaries and physicians].

PubMed

Fischer, Louis-Paul; Cossu Ferra Fischer, Véronique

2011-01-01

In the 4th century A.D. the first unicorn was shown as a little horse with a twisted horn and was completely different from the Oriental one described by Marco Polo. The new unicorn appeared during the 4th century A.D. in Alexandria. This animal enamoured of purity was used as a Christian symbol of purity and sacrifice and adornment of churches like in Lyons in the 13th century. In the 15th & 17th centuries the unicorn was found again in famous tapestries like La Dame B la Licorne as it meant courage, speed and purity. Since the 6th century the powder of unicorn horn was used as a medicine or a drug against poisoning. Depictions of unicorn can be found in chemist's signs, engravings or paintings until the 19th century.

Low-cost and miniaturized 100-Gb/s (2 × 50 Gb/s) PAM-4 TO-packaged ROSA for data center networks.

PubMed

Kang, Sae-Kyoung; Huh, Joon Young; Lee, Jie Hyun; Lee, Joon Ki

2018-03-05

We design and implement a cost-effective and compact 100-Gb/s (2 × 50 Gb/s) PAM-4 receiver optical sub-assembly (ROSA) by using a TO-can package instead of an expensive box-type package. It consists of an optical demultiplexer, two PIN-PDs and a 2-channel linear transimpedance amplifier. The components are passively aligned and assembled using alignment marks engraved on each part. With a real-time PAM-4 DSP chip, we measured the back-to-back receiver sensitivities of the 100-Gb/s ROSA based on TO-56 to be less than -13.2 dBm for both channels at a bit error rate of 2.4e-4. The crosstalk penalty due to the adjacent channel interference was observed around 0.1 dB.

Fabrication and application of a carbon nanotube/poly(dimethylsiloxane) coated optoacoustic film transducer

NASA Astrophysics Data System (ADS)

Fan, Xiaofeng; Ha, Kanglyeol; Kim, Moojoon; Kang, Gwansuk; Choi, Min Joo; Oh, Junghwan

2018-07-01

An optoacoustic film transducer was fabricated by coating carbon nanotubes (CNTs) and poly(dimethylsiloxane) (PDMS) on the surface of a thin flexible optical poly(ethylene terephthalate) (PET) sheet. When a laser pulse was irradiated on the film transducer, a shockwave, with superimposed waves reflected from the surface and the back of the film, was generated. The shockwave had very small pulse widths of 20–30 ns, and the maximum pressure of 5.4 MPa was obtained at 10 mm from the surface of the transducer. A line-focused optoacoustic source was fabricated using the film transducer, and its characteristics were investigated. A very high maximum pressure of about 35 MPa was obtained using the source. It was demonstrated that the source can engrave a line trace on a chalk surface.

Three-dimensional volume containing multiple two-dimensional information patterns

NASA Astrophysics Data System (ADS)

Nakayama, Hirotaka; Shiraki, Atsushi; Hirayama, Ryuji; Masuda, Nobuyuki; Shimobaba, Tomoyoshi; Ito, Tomoyoshi

2013-06-01

We have developed an algorithm for recording multiple gradated two-dimensional projection patterns in a single three-dimensional object. When a single pattern is observed, information from the other patterns can be treated as background noise. The proposed algorithm has two important features: the number of patterns that can be recorded is theoretically infinite and no meaningful information can be seen outside of the projection directions. We confirmed the effectiveness of the proposed algorithm by performing numerical simulations of two laser crystals: an octagonal prism that contained four patterns in four projection directions and a dodecahedron that contained six patterns in six directions. We also fabricated and demonstrated an actual prototype laser crystal from a glass cube engraved by a laser beam. This algorithm has applications in various fields, including media art, digital signage, and encryption technology.

KSC-07pd0180

NASA Image and Video Library

2007-01-27

KENNEDY SPACE CENTER, FLA. -- Ed White III touches his father's name engraved in the Space Mirror Memorial at the KSC Visitor Complex. White attended the ceremony held in remembrance of the astronauts lost in the Apollo 1 fire: Virgil "Gus" Grissom, Edward H. White II and Roger B. Chaffee. Members of their families, along with KSC Director Bill Parsons, Associate Administrator for Space Operations William Gerstenmaier, President of the Astronauts Memorial Foundation Stephen Feldman and Chairman of the Board of Directors of the Astronauts Memorial Foundation William Potter, attended the ceremony. The mirror was designated as a national memorial by Congress and President George Bush in 1991 to honor fallen astronauts. Their names are emblazoned on the monument’s 42-½-foot-high by 50-foot-wide black granite surface as if to be projected into the heavens. Photo credit:NASA/Kim Shiflett

One-step patterning of hollow microstructures in paper by laser cutting to create microfluidic analytical devices.

PubMed

Nie, Jinfang; Liang, Yuanzhi; Zhang, Yun; Le, Shangwang; Li, Dunnan; Zhang, Songbai

2013-01-21

In this paper, we report a simple, low-cost method for rapid, highly reproductive fabrication of paper-based microfluidics by using a commercially available, minitype CO(2) laser cutting/engraving machine. This method involves only one operation of cutting a piece of paper by laser according to a predesigned pattern. The hollow microstructures formed in the paper are used as the 'hydrophobic barriers' to define the hydrophilic flowing paths. A typical paper device on a 4 cm × 4 cm piece of paper can be fabricated within ∼7-20 s; it is ready for use once the cutting process is finished. The main fabrication parameters such as the applied current and cutting rate of the laser were optimized. The fabrication resolution and multiplexed analytical capability of the hollow microstructure-patterned paper were also characterized.

Extracting the potential-well of a near-field optical trap using the Helmholtz-Hodge decomposition

NASA Astrophysics Data System (ADS)

Zaman, Mohammad Asif; Padhy, Punnag; Hansen, Paul C.; Hesselink, Lambertus

2018-02-01

The non-conservative nature of the force field generated by a near-field optical trap is analyzed. A plasmonic C-shaped engraving on a gold film is considered as the trap. The force field is calculated using the Maxwell stress tensor method. The Helmholtz-Hodge decomposition is used to extract the conservative and the non-conservative component of the force. Due to the non-negligible non-conservative component, it is found that the conventional approach of extracting the potential by direct integration of the force is not accurate. Despite the non-conservative nature of the force field, it is found that the statistical properties of a trapped nanoparticle can be estimated from the conservative component of the force field alone. Experimental and numerical results are presented to support the claims.

Possible astronomical meanings of some El Molle relics near the ESO Observatory at La Silla

NASA Astrophysics Data System (ADS)

Bernardi, Gabriella; Vecchiato, Alberto; Bucciarelli, Beatrice

2012-07-01

This paper describes a peculiar, man-made circular stone structure, associated with the ancient rock engravings that are around the site of La Silla in Chile close to the European Southern Observatory, and are attributed to the El Molle Culture. Three stones of the circle, different from all the others, were likely to pinpoint the alignment of three bright stars close to the horizon, as seen from a specific vantage point inside the structure. The El Molle was the only period in which this alignment occurred significantly close to the horizon, moreover it was only in this epoch that it could also be associated with the transition from the warm to the cold season, a period of the year which was quite important for a society that supported itself by herding and farming.

Spectrally-Narrowed Emissions from Organic Crystals Having a One-Dimensional Grating on Their Surface.

PubMed

Yamamoto, Hiroyuki; Obara, Keiji; Higashihara, Shohei; Obama, Yuki; Yamao, Takeshi; Hotta, Shu

2016-04-01

We have succeeded in directly engraving one-dimensional diffraction gratings on the surface of organic semiconducting oligomer crystals by using focused ion beam (FIB) lithography and laser ablation (LA) methods. The FIB method enabled us to shape the gratings with varying periods down to ~150 nm. With the LA method a large-area grating with a ~500-nm period was readily accessible. All the above crystals indicated spectrally-narrowed emission (SNE) lines even in the case of shallow groove depths ~2-4 nm. In particular, we definitively observed the SNE pertinent to the first-order diffraction with the crystal having the diffraction grating of a 148.3-nm average period. The present results indicate utility of the built-in gratings that can directly be fabricated on the surface of the crystals.

Transits of Venus and Mercury as muses

NASA Astrophysics Data System (ADS)

Tobin, William

2013-11-01

Transits of Venus and Mercury have inspired artistic creation of all kinds. After having been the first to witness a Venusian transit, in 1639, Jeremiah Horrocks expressed his feelings in poetry. Production has subsequently widened to include songs, short stories, novels, novellas, sermons, theatre, film, engravings, paintings, photography, medals, sculpture, stained glass, cartoons, stamps, music, opera, flower arrangements, and food and drink. Transit creations are reviewed, with emphasis on the English- and French-speaking worlds. It is found that transits of Mercury inspire much less creation than those of Venus, despite being much more frequent, and arguably of no less astronomical significance. It is suggested that this is primarily due to the mythological associations of Venus with sex and love, which are more powerful and gripping than Mercury's mythological role as a messenger and protector of traders and thieves. The lesson for those presenting the night sky to the public is that sex sells.

Overcoming the brittleness of glass through bio-inspiration and micro-architecture.

PubMed

Mirkhalaf, M; Dastjerdi, A Khayer; Barthelat, F

2014-01-01

Highly mineralized natural materials such as teeth or mollusk shells boast unusual combinations of stiffness, strength and toughness currently unmatched by engineering materials. While high mineral contents provide stiffness and hardness, these materials also contain weaker interfaces with intricate architectures, which can channel propagating cracks into toughening configurations. Here we report the implementation of these features into glass, using a laser engraving technique. Three-dimensional arrays of laser-generated microcracks can deflect and guide larger incoming cracks, following the concept of 'stamp holes'. Jigsaw-like interfaces, infiltrated with polyurethane, furthermore channel cracks into interlocking configurations and pullout mechanisms, significantly enhancing energy dissipation and toughness. Compared with standard glass, which has no microstructure and is brittle, our bio-inspired glass displays built-in mechanisms that make it more deformable and 200 times tougher. This bio-inspired approach, based on carefully architectured interfaces, provides a new pathway to toughening glasses, ceramics or other hard and brittle materials.

ATM Card Cloning and Ethical Considerations.

PubMed

Kaur, Paramjit; Krishan, Kewal; Sharma, Suresh K; Kanchan, Tanuj

2018-05-01

With the advent of modern technology, the way society handles and performs monetary transactions has changed tremendously. The world is moving swiftly towards the digital arena. The use of Automated Teller Machine (ATM) cards (credit and debit) has led to a "cash-less society" and has fostered digital payments and purchases. In addition to this, the trust and reliance of the society upon these small pieces of plastic, having numbers engraved upon them, has increased immensely over the last two decades. In the past few years, the number of ATM fraud cases has increased exponentially. With the money of the people shifting towards the digital platform, ATM skimming has become a problem that has eventually led to a global outcry. The present review discusses the serious repercussions of ATM card cloning and the associated privacy, ethical and legal concerns. The preventive measures which need to be taken and adopted by the government authorities to mitigate the problem have also been discussed.

Actively caring to prevent bullying in an elementary school: Prompting and rewarding prosocial behavior.

PubMed

McCarty, Shane; Teie, Sophia; McCutchen, Jenna; Geller, E Scott

2016-01-01

This field study evaluated the impact of an intervention designed to prevent bullying among elementary-school students by prompting and rewarding prosocial behavior. More specifically, teachers of 404 second-, third-, fourth-, fifth-, and sixth-grade students from an elementary school in northeast Virginia asked their students to look out for other students' prosocial behaviors (termed "actively caring") and to submit their stories about actively caring. At the start of every class day, the teachers read three of these stories and recognized one story and the two associated students (i.e., the observer and the performer) by providing each with a wristband engraved with "Actively Caring for People." For six consecutive Fridays, students reported their observations of bullying and completed a single item estimate of self-esteem. Weekly surveys revealed reductions in "being bullied" and "bullying others," as well as an increase in self-esteem.

Overcoming the brittleness of glass through bio-inspiration and micro-architecture

NASA Astrophysics Data System (ADS)

Mirkhalaf, M.; Dastjerdi, A. Khayer; Barthelat, F.

2014-01-01

Highly mineralized natural materials such as teeth or mollusk shells boast unusual combinations of stiffness, strength and toughness currently unmatched by engineering materials. While high mineral contents provide stiffness and hardness, these materials also contain weaker interfaces with intricate architectures, which can channel propagating cracks into toughening configurations. Here we report the implementation of these features into glass, using a laser engraving technique. Three-dimensional arrays of laser-generated microcracks can deflect and guide larger incoming cracks, following the concept of ‘stamp holes’. Jigsaw-like interfaces, infiltrated with polyurethane, furthermore channel cracks into interlocking configurations and pullout mechanisms, significantly enhancing energy dissipation and toughness. Compared with standard glass, which has no microstructure and is brittle, our bio-inspired glass displays built-in mechanisms that make it more deformable and 200 times tougher. This bio-inspired approach, based on carefully architectured interfaces, provides a new pathway to toughening glasses, ceramics or other hard and brittle materials.

[Between 100 and 200 years before the microbiome…].

PubMed

Cribier, B

2015-01-01

Before the era of microbiote, our ancestors patiently discovered, described and cultivated pathogens, including those responsible for dermatoses. The very well known ectoparasites were represented in the earliest books on cutaneous diseases at the end of XVIII(th) century and the first half of the XIX(th) century. Fungi were discovered in the 1840s, rapidly followed by numerous bacteria, including those causing tuberculosis and lepra. This article is illustrated by images that often showed for the first time parasites and bacteria in books dedicated to cutaneous diseases. Engravings and photographs from the books of Willan, Rayer and Hardy show accurate images of pathogens. Microscopic images can also be found in the textbooks of Simon, Leloir, Sabouraud, Unna and many others. Darier himself believed that "Darier's disease" was due to a parasite, which explains why he named his disease "Vegetant follicular psorospermosis". Copyright © 2015 Elsevier Masson SAS. All rights reserved.

The Astrologer's Apparatus: The Material Culture of an Astronomical Specialty in Greek Egypt

NASA Astrophysics Data System (ADS)

Evans, J.

2002-12-01

While astrology was certainly of Babylonian origin, it was enthusiastically embraced by the Greeks in Egypt, starting in the second century BC. Astrology triumphed because it resonated with many other aspects of Greek culture: astronomy and mathematics, as well as religion and philosophy, magic and mysticism. We have half a dozen Greek and Latin manuals of astrology, written between the first and fifth centuries AD, so we know a lot about the history of astrological doctrine. However, until recently, we have known very little about the social and material circumstances of astrological consultations. Who were the practitioners? Where did they practice? What apparatus did they use? What took place in an astrological consltation? By drawing on a wide range of sources, including literary texts, mathematical papyri, engraved gems, coins, statues and mummy portraits, we can now sketch a very detailed picutre of the professional practice of astrology in Greek Egypt.

Liquid-assisted tunable metasurface for simultaneous manipulation of surface elastic and acoustic waves

NASA Astrophysics Data System (ADS)

Yuan, Si-Min; Ma, Tian-Xue; Chen, A.-Li; Wang, Yue-Sheng

2018-03-01

A tunable and multi-functional one-dimensional metasurface, which is formed by engraving periodic semi-ellipse grooves on the surface of an aluminum half-space, is proposed in this paper. One characteristic of the metasurface is the manipulation of multi-physical fields, i.e. it could be utilized to manipulate surface elastic and acoustic waves simultaneously. The dispersion curves of the elastic and acoustic waves can be effectively tuned by adding liquids into the grooves. Based on the tunability different applications can be realized by adding different volumes of different liquids into the grooves. As an example, simultaneous rainbow trapping of the surface elastic and acoustic waves is demonstrated in the metasurface. Moreover, a resonant cavity where the elastic and acoustic waves are highly confined is reported. The proposed metasurface paves the way to the design of multi-functional devices for simultaneous control of elastic and acoustic waves.

Rational selection of substrates to improve color intensity and uniformity on microfluidic paper-based analytical devices.

PubMed

Evans, Elizabeth; Gabriel, Ellen Flávia Moreira; Coltro, Wendell Karlos Tomazelli; Garcia, Carlos D

2014-05-07

A systematic investigation was conducted to study the effect of paper type on the analytical performance of a series of microfluidic paper-based analytical devices (μPADs) fabricated using a CO2 laser engraver. Samples included three different grades of Whatman chromatography paper, and three grades of Whatman filter paper. According to the data collected and the characterization performed, different papers offer a wide range of flow rate, thickness, and pore size. After optimizing the channel widths on the μPAD, the focus of this study was directed towards the color intensity and color uniformity formed during a colorimetric enzymatic reaction. According to the results herein described, the type of paper and the volume of reagents dispensed in each detection zone can determine the color intensity and uniformity. Therefore, the objective of this communication is to provide rational guidelines for the selection of paper substrates for the fabrication of μPADs.

Use of acoustics to deter bark beetles from entering tree material.

PubMed

Aflitto, Nicholas C; Hofstetter, Richard W

2014-12-01

Acoustic technology is a potential tool to protect wood materials and eventually live trees from colonization by bark beetles. Bark beetles such as the southern pine beetle Dendroctonus frontalis, western pine beetle D. brevicomis and pine engraver Ips pini (Coleoptera: Curculionidae) use chemical and acoustic cues to communicate and to locate potential mates and host trees. In this study, the efficacy of sound treatments on D. frontalis, D. brevicomis and I. pini entry into tree materials was tested. Acoustic treatments significantly influenced whether beetles entered pine logs in the laboratory. Playback of artificial sounds reduced D. brevicomis entry into logs, and playback of stress call sounds reduced D. frontalis entry into logs. Sound treatments had no effect on I. pini entry into logs. The reduction in bark beetle entry into logs using particular acoustic treatments indicates that sound could be used as a viable management tool. © 2013 Society of Chemical Industry.

CAD system of design and engineering provision of die forming of compressor blades for aircraft engines

NASA Astrophysics Data System (ADS)

Khaimovich, I. N.

2017-10-01

The articles provides the calculation algorithms for blank design and die forming fitting to produce the compressor blades for aircraft engines. The design system proposed in the article allows generating drafts of trimming and reducing dies automatically, leading to significant reduction of work preparation time. The detailed analysis of the blade structural elements features was carried out, the taken limitations and technological solutions allowed forming generalized algorithms of forming parting stamp face over the entire circuit of the engraving for different configurations of die forgings. The author worked out the algorithms and programs to calculate three dimensional point locations describing the configuration of die cavity. As a result the author obtained the generic mathematical model of final die block in the form of three-dimensional array of base points. This model is the base for creation of engineering documentation of technological equipment and means of its control.

Memory replay in balanced recurrent networks

PubMed Central

Chenkov, Nikolay; Sprekeler, Henning; Kempter, Richard

2017-01-01

Complex patterns of neural activity appear during up-states in the neocortex and sharp waves in the hippocampus, including sequences that resemble those during prior behavioral experience. The mechanisms underlying this replay are not well understood. How can small synaptic footprints engraved by experience control large-scale network activity during memory retrieval and consolidation? We hypothesize that sparse and weak synaptic connectivity between Hebbian assemblies are boosted by pre-existing recurrent connectivity within them. To investigate this idea, we connect sequences of assemblies in randomly connected spiking neuronal networks with a balance of excitation and inhibition. Simulations and analytical calculations show that recurrent connections within assemblies allow for a fast amplification of signals that indeed reduces the required number of inter-assembly connections. Replay can be evoked by small sensory-like cues or emerge spontaneously by activity fluctuations. Global—potentially neuromodulatory—alterations of neuronal excitability can switch between network states that favor retrieval and consolidation. PMID:28135266

The Illustrious Anatomist: Authorship, Patronage, and Illustrative Style in Anatomy Folios, 1700-1840.

PubMed

Berkowitz, Carin

2015-01-01

A number of anatomists working in the period 1700-1840 used expensive illustrated books to depict their greatest scientific work, establish priority of discovery for posterity, and enlist patrons. These anatomists drew on the grand traditions of anatomical illustration and asserted their right to a place within that history. But with artists mediating the expression of anatomists' vision, it was important that an anatomist assert his control over the illustrations commemorating his expertise. Anatomists used stylistic signatures to signal that a work was their own. Very different styles of illustration in the works of different anatomists, therefore, were made easily recognizable, and sometimes a single artist adopted notably different styles for different anatomists who employed him. Style became a marker of authorship, identifiable with the anatomist, even when he employed an artist to do the drawing and engraving, and it was also an important method of appealing to patrons.

Possible portrait of Galileo Galilei as a young scientist

NASA Astrophysics Data System (ADS)

Molaro, P.

2012-02-01

We describe here the possible discovery of a portrait of Galileo Galilei in his youth. The painting is not signed and the identification is mainly physiognomic. In fact, the face reveals clear resemblance to Domenico Tintoretto's portrait and to Giuseppe Calendi's engraving derived from a lost portrait made by Santi di Tito in 1601. Along with the portraits by Tintoretto, Furini, Leoni, Passignano, and Sustermans this could be another portrait of Galileo made al naturale, but, unlike the others, it depicts the scientist before he reached fame. Galileo looks rather young, at age of about 20-25 years. His eyes in the portrait are clear and the expression intense and appealing. From Galileo's correspondence we know of a portrait made by his friend Ludovico Cigoli. Rather interesting, though admittedly quite improbable, is the possibility of a self-portrait whose existence is mentioned in the first biography of Galileo by Salusbury in 1664.

Realising damage-tolerant nacre-inspired CFRP

NASA Astrophysics Data System (ADS)

Narducci, F.; Lee, K.-Y.; Pinho, S. T.

2018-07-01

In this work, a nacre-inspired Carbon Fibre Reinforced Polymer (CFRP) composite is designed, synthesised and tested. Analytical and numerical models are used to design a tiled micro-structure, mimicking the staggered arrangement of ceramic platelets in nacre and exploiting geometrical interlocks for crack deflection and damage diffusion. The designed pattern of tiles is then laser-engraved in the laminate plies. In order to increase the damage-spreading capability of the material, a thin layer of poly(lactic acid) (PLA) is film-cast on the interlaminar region, both as a continuous film and as a pattern of fractal-shaped patches. Three-point bending tests show how the nacre-like micro-structure succeeds in deflecting cracks, with damage diffusion being significantly improved by the addition of PLA at the interface between tiles. It is observed that a texture of discontinuous fractal-shaped PLA patches can increase damage diffusion, by promoting the unlocking of tiles whilst preserving the interface strength.

Real-time Tracking of DNA Fragment Separation by Smartphone.

PubMed

Tao, Chunxian; Yang, Bo; Li, Zhenqing; Zhang, Dawei; Yamaguchi, Yoshinori

2017-06-01

Slab gel electrophoresis (SGE) is the most common method for the separation of DNA fragments; thus, it is broadly applied to the field of biology and others. However, the traditional SGE protocol is quite tedious, and the experiment takes a long time. Moreover, the chemical consumption in SGE experiments is very high. This work proposes a simple method for the separation of DNA fragments based on an SGE chip. The chip is made by an engraving machine. Two plastic sheets are used for the excitation and emission wavelengths of the optical signal. The fluorescence signal of the DNA bands is collected by smartphone. To validate this method, 50, 100, and 1,000 bp DNA ladders were separated. The results demonstrate that a DNA ladder smaller than 5,000 bp can be resolved within 12 min and with high resolution when using this method, indicating that it is an ideal substitute for the traditional SGE method.

A Combined Experimental and Numerical Approach to the Laser Joining of Hybrid Polymer - Metal Parts

NASA Astrophysics Data System (ADS)

Rodríguez-Vidal, E.; Lambarri, J.; Soriano, C.; Sanz, C.; Verhaeghe, G.

A two-step method for the joining of opaque polymer to metal is presented. Firstly, the metal is structured locally on a micro-scale level, to ensure adhesion with the polymeric counterpart. In a second step, the opposite side of the micro-structured metal is irradiated by means of a laser source. The heat thereby created is conducted by the metal and results in the melting of the polymer at the interface. The polymer thereby adheres to the metal and flows into the previously engraved structures, creating an additional mechanical interlock between the two materials. The welding parameters are fine-tuned with the assistance of a finite element model, to ensure the required interface temperature. The method is illustrated using a dual phase steel joined to a fiber-reinforced polyamide. The effect of different microstructures, in particular geometry and cavity aspect ratio, on the joint's tensile-shear mechanical performance is discussed.

The Behavior of Translucent Composite Laminates under Highly Energetic Laser Irradiations

NASA Astrophysics Data System (ADS)

Allheily, Vadim; Merlat, Lionel; Lacroix, Fabrice; Eichhorn, Alfred; L'Hostis, Gildas

With the emergence of composite materials in the last decades, the interaction between light and diffusive materials has become a challenging topic in many key manufacturing areas (laser welding, laser surface treatment, engraving, etc.). In this paper, the behavior of laminated glass fiber-reinforced plastic composites (GFRP) under 1.07 μm-wavelength irradiations is investigated. Optical parameters are first assessed to build up a basic analytical interaction model involving internal refraction and reflection. The scattering effect due to the presence of oriented glass fibers is also a topic of interest. A thermodynamic analysis is then carried out from the induced volume heat source until the degradation temperature of the material is reached out. The study finally results in a one-dimensional model describing the optical and thermo-dynamical behavior of GFRP under high-power laser irradiations up to ignition of the chemical degradation phenomena.

Bottom-up production of meta-atoms for optical magnetism in visible and NIR light

NASA Astrophysics Data System (ADS)

Barois, Philippe; Ponsinet, Virginie; Baron, Alexandre; Richetti, Philippe

2018-02-01

Many unusual optical properties of metamaterials arise from the magnetic response of engineered structures of sub-wavelength size (meta-atoms) exposed to light. The top-down approach whereby engineered nanostructure of well-defined morphology are engraved on a surface proved to be successful for the generation of strong optical magnetism. It faces however the limitations of high cost and small active area in visible light where nanometre resolution is needed. The bottom-up approach whereby the fabrication metamaterials of large volume or large area results from the combination of nanochemitry and self-assembly techniques may constitute a cost-effective alternative. This approach nevertheless requires the large-scale production of functional building-blocks (meta-atoms) bearing a strong magnetic optical response. We propose in this paper a few tracks that lead to the large scale synthesis of magnetic metamaterials operating in visible or near IR light.

Rembrandt's 'Beggar with a wooden leg' and other comparable prints.

PubMed

ten Kate, J J; Jennekens, F G I; Vos-Niël, J M E

2009-02-01

Rembrandt's etching of a beggar with a wooden leg is notable because the two lower limbs of the presumed beggar are present and not deformed. Using the facilities of four specialised Dutch art institutes, we carried out a systematic investigation to find other etchings and engravings of subjects with artificial legs supporting non-amputated limbs, from the period 1500 to 1700 AD. We discovered 28 prints produced by at least 18 artists. Several offered clues to a disorder of a knee, the lower leg or the foot. All individuals were adult males, suggesting the probability of traumatic lesions. We conclude that in this period artificial legs were not only used in the case of absence of part of a lower limb, but also for other reasons, notably disorders of the knee, lower leg or foot. They may also have been used to attract compassion.

Using femtosecond laser to fabricate highly precise interior three-dimensional microstructures in polymeric flow chip

PubMed Central

Lee, Chia-Yu; Chang, Ting-Chou; Wang, Shau-Chun; Chien, Chih-Wei; Cheng, Chung-Wei

2010-01-01

This paper reports using femtosecond laser marker to fabricate the three-dimensional interior microstructures in one closed flow channel of plastic substrate. Strip-like slots in the dimensions of 800 μm×400 μm×65 μm were ablated with pulse Ti:sapphire laser at 800 nm (pulse duration of ∼120 fs with 1 kHz repetition rate) on acrylic slide. After ablation, defocused beams were used to finish the surface of microstructures. Having finally polished with sonication, the laser fabricated structures are highly precise with the arithmetic roughness of 1.5 and 4.5 nm. Fabricating such highly precise microstructures cannot be accomplished with nanosecond laser marking or other mechanical drilling methods. In addition, since laser ablation can directly engrave interior microstructures in one closed chip, glue smearing problems to damage molded microstructures possibly to occur during the chip sealing procedures can be avoided too. PMID:21079695

Using femtosecond laser to fabricate highly precise interior three-dimensional microstructures in polymeric flow chip.

PubMed

Lee, Chia-Yu; Chang, Ting-Chou; Wang, Shau-Chun; Chien, Chih-Wei; Cheng, Chung-Wei

2010-10-18

This paper reports using femtosecond laser marker to fabricate the three-dimensional interior microstructures in one closed flow channel of plastic substrate. Strip-like slots in the dimensions of 800 μm×400 μm×65 μm were ablated with pulse Ti:sapphire laser at 800 nm (pulse duration of ∼120 fs with 1 kHz repetition rate) on acrylic slide. After ablation, defocused beams were used to finish the surface of microstructures. Having finally polished with sonication, the laser fabricated structures are highly precise with the arithmetic roughness of 1.5 and 4.5 nm. Fabricating such highly precise microstructures cannot be accomplished with nanosecond laser marking or other mechanical drilling methods. In addition, since laser ablation can directly engrave interior microstructures in one closed chip, glue smearing problems to damage molded microstructures possibly to occur during the chip sealing procedures can be avoided too.

Assessing forest vulnerability and the potential distribution of pine beetles under current and future climate scenarios in the Interior West of the US

USGS Publications Warehouse

Evangelista, P.H.; Kumar, S.; Stohlgren, T.J.; Young, N.E.

2011-01-01

The aim of our study was to estimate forest vulnerability and potential distribution of three bark beetles (Curculionidae: Scolytinae) under current and projected climate conditions for 2020 and 2050. Our study focused on the mountain pine beetle (Dendroctonus ponderosae), western pine beetle (Dendroctonus brevicomis), and pine engraver (Ips pini). This study was conducted across eight states in the Interior West of the US covering approximately 2.2millionkm2 and encompassing about 95% of the Rocky Mountains in the contiguous US. Our analyses relied on aerial surveys of bark beetle outbreaks that occurred between 1991 and 2008. Occurrence points for each species were generated within polygons created from the aerial surveys. Current and projected climate scenarios were acquired from the WorldClim database and represented by 19 bioclimatic variables. We used Maxent modeling technique fit with occurrence points and current climate data to model potential beetle distributions and forest vulnerability. Three available climate models, each having two emission scenarios, were modeled independently and results averaged to produce two predictions for 2020 and two predictions for 2050 for each analysis. Environmental parameters defined by current climate models were then used to predict conditions under future climate scenarios, and changes in different species' ranges were calculated. Our results suggested that the potential distribution for bark beetles under current climate conditions is extensive, which coincides with infestation trends observed in the last decade. Our results predicted that suitable habitats for the mountain pine beetle and pine engraver beetle will stabilize or decrease under future climate conditions, while habitat for the western pine beetle will continue to increase over time. The greatest increase in habitat area was for the western pine beetle, where one climate model predicted a 27% increase by 2050. In contrast, the predicted habitat of the mountain pine beetle from another climate model suggested a decrease in habitat areas as great as 46% by 2050. Generally, 2020 and 2050 models that tested the three climate scenarios independently had similar trends, though one climate scenario for the western pine beetle produced contrasting results. Ranges for all three species of bark beetles shifted considerably geographically suggesting that some host species may become more vulnerable to beetle attack in the future, while others may have a reduced risk over time. ?? 2011 Elsevier B.V.

A novel single-ended readout depth-of-interaction PET detector fabricated using sub-surface laser engraving.

PubMed

Uchida, H; Sakai, T; Yamauchi, H; Hakamata, K; Shimizu, K; Yamashita, T

2016-09-21

We propose a novel scintillation detector design for positron emission tomography (PET), which has depth of interaction (DOI) capability and uses a single-ended readout scheme. The DOI detector contains a pair of crystal bars segmented using sub-surface laser engraving (SSLE). The two crystal bars are optically coupled to each other at their top segments and are coupled to two photo-sensors at their bottom segments. Initially, we evaluated the performance of different designs of single crystal bars coupled to photomultiplier tubes at both ends. We found that segmentation by SSLE results in superior performance compared to the conventional method. As the next step, we constructed a crystal unit composed of a 3  ×  3  ×  20 mm 3 crystal bar pair, with each bar containing four layers segmented using the SSLE. We measured the DOI performance by changing the optical conditions for the crystal unit. Based on the experimental results, we then assessed the detector performance in terms of the DOI capability by evaluating the position error, energy resolution, and light collection efficiency for various crystal unit designs with different bar sizes and a different number of layers (four to seven layers). DOI encoding with small position error was achieved for crystal units composed of a 3  ×  3  ×  20 mm 3 LYSO bar pair having up to seven layers, and with those composed of a 2  ×  2  ×  20 mm 3 LYSO bar pair having up to six layers. The energy resolution of the segment in the seven-layer 3  ×  3  ×  20 mm 3 crystal bar pair was 9.3%-15.5% for 662 keV gamma-rays, where the segments closer to the photo-sensors provided better energy resolution. SSLE provides high geometrical accuracy at low production cost due to the simplicity of the crystal assembly. Therefore, the proposed DOI detector is expected to be an attractive choice for practical small-bore PET systems dedicated to imaging of the brain, breast, and small animals.

A Starry Diamond in a Veil of Light: Artistic and Literary Suggestions of a Comet

NASA Astrophysics Data System (ADS)

Gasperini, A.; Galli, D.

2016-01-01

Donati's Comet, discovered in Florence on June 2, 1858, was one of the most spectacular astronomical events of the nineteenth century. It could be seen with the naked eye during September and October 1858, when it reached its highest splendour. The sight of the comet, with its bright nucleus and its long, curved tail, inspired paintings, watercolors, engravings, and sketches by artists such as William Dyce, Samuel Palmer, and William Turner of Oxford. Donati's Comet is mentioned in the works of several contemporary writers and poets (Hawthorne, Dickens, Hardy, and Verne), and in the diaries of explorers and travelers all around the world. Long-lasting traces of the impression left by Donati's Comet are found in many forms of popular art and literature (ladies' magazines, children's books, collection cards, and advertisements) until the beginning of the twentieth century. This paper focuses on a few examples of this fascination, emphasizing the connections among the astronomical event and the artistic sensibility of the period.

Comparative analysis of public opinion research in the U.S. and Canada

NASA Astrophysics Data System (ADS)

Setlakwe, Linda; DiNunzio, Lisa A.

2004-06-01

Bank note producers are working to thwart the threat of counterfeit notes created using high resolution, digital image processing software and color output devices such as inkjet printers, color copiers, and scanners. Genuine notes must incorporate better overt and machine-readable security features that will reduce the chance of counterfeit notes being passed. Recently, Canada and the United States introduced newly designed bank notes that are intended to enable the general public to more easily distinguish genuine notes from counterfeits. The Bank of Canada (BoC) and the U.S. Department of Treasury"s Bureau of Engraving and Printing (BEP) have conducted similar market research projects to explore target audiences' perceptions and attitudes towards currency design and security features. This paper will present a comparative analysis of the two research projects, both of which were conducted using similar methodology. The results of these research studies assist in the selection of security features for future generations of bank notes.

3D Rainbow Particle Tracking Velocimetry

NASA Astrophysics Data System (ADS)

Aguirre-Pablo, Andres A.; Xiong, Jinhui; Idoughi, Ramzi; Aljedaani, Abdulrahman B.; Dun, Xiong; Fu, Qiang; Thoroddsen, Sigurdur T.; Heidrich, Wolfgang

2017-11-01

A single color camera is used to reconstruct a 3D-3C velocity flow field. The camera is used to record the 2D (X,Y) position and colored scattered light intensity (Z) from white polyethylene tracer particles in a flow. The main advantage of using a color camera is the capability of combining different intensity levels for each color channel to obtain more depth levels. The illumination system consists of an LCD projector placed perpendicularly to the camera. Different intensity colored level gradients are projected onto the particles to encode the depth position (Z) information of each particle, benefiting from the possibility of varying the color profiles and projected frequencies up to 60 Hz. Chromatic aberrations and distortions are estimated and corrected using a 3D laser engraved calibration target. The camera-projector system characterization is presented considering size and depth position of the particles. The use of these components reduces dramatically the cost and complexity of traditional 3D-PTV systems.

Raman imaging spectroscopic characterization of modified poly(dimethylsiloxane) for micro total analysis systems applications.

PubMed

de Campos, Richard Piffer Soares; Yoshida, Inez Valeria Pagotto; Breitkreitz, Márcia Cristina; Poppi, Ronei Jesus; Fracassi da Silva, José Alberto

2013-01-01

Methacryloxypropyl-modified poly(dimethylsiloxane) rubbers were obtained from poly(dimethylsiloxane), PDMS, and methacryloxypropyltrimethoxysilane, MPTMS, by polycondensation reactions. The modified rubbers, prepared with 20 and 30% (v/v) of MPTMS, were used as substrates for microchannel fabrication by the CO(2) laser ablation technique. Raman imaging spectroscopy was used for the surface characterization, showing the homogeneity of the rubbery material, with uniform distribution of the crosslinking centers. Under the experimental conditions used, damage to the rubber from the CO(2) laser radiation used for the channel engraving was not observed. Correlation maps of the surface were obtained in order to spatially evaluate the modification inside and outside the channels. The correlations between the methacryloxypropyl-modified poly(dimethylsiloxane) rubbers and MPTMS (spectral range of 1800-1550 cm(-1)) and PDMS (spectral range of 820-670 cm(-1)) precursors were higher than 0.95 and 0.99, respectively. In addition, Raman imaging spectroscopy allows monitoring the topography of the fabricated microchannel. Copyright © 2012 Elsevier B.V. All rights reserved.

A rapid, maskless 3D prototyping for fabrication of capillary circuits: Toward urinary protein detection.

PubMed

Yan, Sheng; Zhu, Yuanqing; Tang, Shi-Yang; Li, Yuxing; Zhao, Qianbin; Yuan, Dan; Yun, Guolin; Zhang, Jun; Zhang, Shiwu; Li, Weihua

2018-04-01

Proteinuria is an established risk marker for progressive renal function loss and patients would significantly benefit from a point-of-care testing. Although extensive work has been done to develop the microfluidic devices for the detection of urinary protein, they need the complicated operation and bulky peripherals. Here, we present a rapid, maskless 3D prototyping for fabrication of capillary fluidic circuits using laser engraving. The capillary circuits can be fabricated in a short amount of time (<10 min) without the requirements of clean-room facilities and photomasks. The advanced capillary components (e.g., trigger valves, retention valves and retention bursting valves) were fabricated, enabling the sequential liquid delivery and sample-reagent mixing. With the integration of smartphone-based detection platform, the microfluidic device can quantify the urinary protein via a colorimetric analysis. By eliminating the bulky and expensive equipment, this smartphone-based detection platform is portable for on-site quantitative detection. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The handedness of historiated spiral columns.

PubMed

Couzin, Robert

2017-09-01

Trajan's Column in Rome (AD 113) was the model for a modest number of other spiral columns decorated with figural, narrative imagery from antiquity to the present day. Most of these wind upwards to the right, often with a congruent spiral staircase within. A brief introductory consideration of antique screw direction in mechanical devices and fluted columns suggests that the former may have been affected by the handedness of designers and the latter by a preference for symmetry. However, for the historiated columns that are the main focus of this article, the determining factor was likely script direction. The manner in which this operated is considered, as well as competing mechanisms that might explain exceptions. A related phenomenon is the reversal of the spiral in a non-trivial number of reproductions of the antique columns, from Roman coinage to Renaissance and baroque drawings and engravings. Finally, the consistent inattention in academic literature to the spiral direction of historiated columns and the repeated publication of erroneous earlier reproductions warrants further consideration.

Complementary Split-Ring Resonator-Loaded Microfluidic Ethanol Chemical Sensor.

PubMed

Salim, Ahmed; Lim, Sungjoon

2016-10-28

In this paper, a complementary split-ring resonator (CSRR)-loaded patch is proposed as a microfluidic ethanol chemical sensor. The primary objective of this chemical sensor is to detect ethanol's concentration. First, two tightly coupled concentric CSRRs loaded on a patch are realized on a Rogers RT/Duroid 5870 substrate, and then a microfluidic channel engraved on polydimethylsiloxane (PDMS) is integrated for ethanol chemical sensor applications. The resonant frequency of the structure before loading the microfluidic channel is 4.72 GHz. After loading the microfluidic channel, the 550 MHz shift in the resonant frequency is ascribed to the dielectric perturbation phenomenon when the ethanol concentration is varied from 0% to 100%. In order to assess the sensitivity range of our proposed sensor, various concentrations of ethanol are tested and analyzed. Our proposed sensor exhibits repeatability and successfully detects 10% ethanol as verified by the measurement set-up. It has created headway to a miniaturized, non-contact, low-cost, reliable, reusable, and easily fabricated design using extremely small liquid volumes.

Trapping or tethering stones (TS): A multifunctional device in the Pastoral Neolithic of the Sahara

PubMed Central

di Lernia, Savino

2018-01-01

The Pierres de Ben Barour, also known as trapping or tethering stones (TS), are stone artefacts with notches or grooves usually interpreted as hunting devices on the basis of rock art engravings. Though their presence is a peculiar feature of desert landscapes from the Sahara to the Arabian Peninsula, we know little about their age, context and function. Here we present a new approach to the study of these artefacts based on a large dataset (837 items) recorded in the Messak plateau (SW Libya). A statistically-based geoarchaeological survey carried out between 2007 and 2011 in Libya, alongside landscape and intra-site analyses of specific archaeological features (such as rock art, settlement and ceremonial contexts), reveal that these artefacts were used for a prolonged period, probably from the early Holocene. This was followed by a multifunctional use of these devices, particularly during the Pastoral Neolithic phase (ca. 6400–3000 cal BC), with the highest concentrations being found near ceremonial contexts related to cattle burials. PMID:29370242

Nano-optical conveyor belt, part II: Demonstration of handoff between near-field optical traps.

PubMed

Zheng, Yuxin; Ryan, Jason; Hansen, Paul; Cheng, Yao-Te; Lu, Tsung-Ju; Hesselink, Lambertus

2014-06-11

Optical tweezers have been widely used to manipulate biological and colloidal material, but the diffraction limit of far-field optics makes focused beams unsuitable for manipulating nanoscale objects with dimensions much smaller than the wavelength of light. While plasmonic structures have recently been successful in trapping nanoscale objects with high positioning accuracy, using such structures for manipulation over longer range has remained a significant challenge. In this work, we introduce a conveyor belt design based on a novel plasmonic structure, the resonant C-shaped engraving (CSE). We show how long-range manipulation is made possible by means of handoff between neighboring CSEs, and we present a simple technique for controlling handoff by rotating the polarization of laser illumination. We experimentally demonstrate handoff between a pair of CSEs for polystyrene spheres 200, 390, and 500 nm in diameter. We then extend this technique and demonstrate controlled particle transport down a 4.5 μm long "nano-optical conveyor belt."

Complementary Split-Ring Resonator-Loaded Microfluidic Ethanol Chemical Sensor

PubMed Central

Salim, Ahmed; Lim, Sungjoon

2016-01-01

In this paper, a complementary split-ring resonator (CSRR)-loaded patch is proposed as a microfluidic ethanol chemical sensor. The primary objective of this chemical sensor is to detect ethanol’s concentration. First, two tightly coupled concentric CSRRs loaded on a patch are realized on a Rogers RT/Duroid 5870 substrate, and then a microfluidic channel engraved on polydimethylsiloxane (PDMS) is integrated for ethanol chemical sensor applications. The resonant frequency of the structure before loading the microfluidic channel is 4.72 GHz. After loading the microfluidic channel, the 550 MHz shift in the resonant frequency is ascribed to the dielectric perturbation phenomenon when the ethanol concentration is varied from 0% to 100%. In order to assess the sensitivity range of our proposed sensor, various concentrations of ethanol are tested and analyzed. Our proposed sensor exhibits repeatability and successfully detects 10% ethanol as verified by the measurement set-up. It has created headway to a miniaturized, non-contact, low-cost, reliable, reusable, and easily fabricated design using extremely small liquid volumes. PMID:27801842

[Ella-cross, a Scanian amulet].

PubMed

Björnberg, Alf; Tegner, Eva

2006-01-01

An Ella-cross is an amulet of a special type dated back to the period of the late 1700s to the early 1800s, stemming from the Scania region in Sweden, the southernmost part of the country. It has not before been studied systematically. The investigation reported here concerned 125 crosses of this type, most of them from various institutions in Scania. The amulets are for the most part quite similar in appearance, consisting of a thin round silver plate 2 - 4 centimeters in diameter on which a cross with four arms of equal length, usually of the anchor type, is engraved, together with a Jesus monogram (IHS and I.N.R.I.) and a plea for "help", lettered in the spelling of the time. An Ella-cross was worn under one's clothing in direct contact with the skin throughout one's life, following its wearer into the grave. It was to protect one from Ellen's diseases (caused by the Neck, an evil water spirit) and also from misfortune and evil.

Performance Investigation of a Handheld 3d Scanner to Define Good Practices for Small Artefact 3d Modeling

NASA Astrophysics Data System (ADS)

Lachat, E.; Landes, T.; Grussenmeyer, P.

2017-08-01

Handheld 3D scanners can be used to complete large scale models with the acquisition of occluded areas or small artefacts. This may be of interest for digitization projects in the field of Cultural Heritage, where detailed areas may require a specific treatment. Such sensors present the advantage of being easily portable in the field, and easily usable even without particular knowledge. In this paper, the Freestyle3D handheld scanner launched on the market in 2015 by FARO is investigated. Different experiments are described, covering various topics such as the influence of range or color on the measurements, but also the precision achieved for geometrical primitive digitization. These laboratory experiments are completed by acquisitions performed on engraved and sculpted stone blocks. This practical case study is useful to investigate which acquisition protocol seems to be the more adapted and leads to precise results. The produced point clouds will be compared to photogrammetric surveys for the purpose of their accuracy assessment.

Electronic resonances in broadband stimulated Raman spectroscopy

NASA Astrophysics Data System (ADS)

Batignani, G.; Pontecorvo, E.; Giovannetti, G.; Ferrante, C.; Fumero, G.; Scopigno, T.

2016-01-01

Spontaneous Raman spectroscopy is a formidable tool to probe molecular vibrations. Under electronic resonance conditions, the cross section can be selectively enhanced enabling structural sensitivity to specific chromophores and reaction centers. The addition of an ultrashort, broadband femtosecond pulse to the excitation field allows for coherent stimulation of diverse molecular vibrations. Within such a scheme, vibrational spectra are engraved onto a highly directional field, and can be heterodyne detected overwhelming fluorescence and other incoherent signals. At variance with spontaneous resonance Raman, however, interpreting the spectral information is not straightforward, due to the manifold of field interactions concurring to the third order nonlinear response. Taking as an example vibrational spectra of heme proteins excited in the Soret band, we introduce a general approach to extract the stimulated Raman excitation profiles from complex spectral lineshapes. Specifically, by a quantum treatment of the matter through density matrix description of the third order nonlinear polarization, we identify the contributions which generate the Raman bands, by taking into account for the cross section of each process.

Techniques for Revealing 3d Hidden Archeological Features: Morphological Residual Models as Virtual-Polynomial Texture Maps

NASA Astrophysics Data System (ADS)

Pires, H.; Martínez Rubio, J.; Elorza Arana, A.

2015-02-01

The recent developments in 3D scanning technologies are not been accompanied by visualization interfaces. We are still using the same types of visual codes as when maps and drawings were made by hand. The available information in 3D scanning data sets is not being fully exploited by current visualization techniques. In this paper we present recent developments regarding the use of 3D scanning data sets for revealing invisible information from archaeological sites. These sites are affected by a common problem, decay processes, such as erosion, that never ceases its action and endangers the persistence of last vestiges of some peoples and cultures. Rock art engravings, or epigraphical inscriptions, are among the most affected by these processes because they are, due to their one nature, carved at the surface of rocks often exposed to climatic agents. The study and interpretation of these motifs and texts is strongly conditioned by the degree of conservation of the imprints left by our ancestors. Every single detail in the remaining carvings can make a huge difference in the conclusions taken by specialists. We have selected two case-studies severely affected by erosion to present the results of the on-going work dedicated to explore in new ways the information contained in 3D scanning data sets. A new method for depicting subtle morphological features in the surface of objects or sites has been developed. It allows to contrast human patterns still present at the surface but invisible to naked eye or by any other archaeological inspection technique. It was called Morphological Residual Model (MRM) because of its ability to contrast the shallowest morphological details, to which we refer as residuals, contained in the wider forms of the backdrop. Afterwards, we have simulated the process of building Polynomial Texture Maps - a widespread technique that as been contributing to archaeological studies for some years - in a 3D virtual environment using the results of MRM calculations. By this, we wish to benefit from the rendering capabilities of RTI-viewer and from its intuitive graphic interface. At the same time, virtual PTM is a way of applying this to areas barred to conventional PTM, like in the case presented of an entire roman city occupying a plateau of several sq. km. The results of this research project are presented and discussed using the two case-studies aforementioned, a Latin inscription from a Roman sanctuary in the north of Portugal and a engraved panel with zoomorphic motifs from a rock art site in the north border of Portugal.

Marketing of patent medicines in the nineteenth century via a corkscrew medicine spoon.

PubMed

Fincham, Jack E

2010-01-01

The C. T. Williamson spoon with manufactured products from a pharmaceutical company engraved on the bowl of the spoon is one of the earliest examples of a manufacturer marketing products via a drug delivery device. The Burroughs, Wellcome and Company, a British corporation using initially an American patented, and later a British patented, Williamson corkscrew spoon marketed British manufactured medicinal products in the U.S. and England to physicians and pharmacists in the late nineteenth and early twentieth century. Other corkscrew spoons were manufactured in this era without product specific notations contained on the spoons. 40 These corkscrew spoons, such as the Williamson and Noe patented apparatuses, helped patients in more easily consuming liquid medications. They also were items potentially favored by physicians and pharmacists for patient's pro- vided liquid medications. Finally, they allowed patients to open corked containers, consume liquid dosage amounts, and hopefully more appropriately comply with necessary regimens in the late nineteenth and early twentieth century. Not surprisingly, Burroughs, Wellcome and Company used the Williamson spoon to successfully market company products to physicians, pharmacists, and patients on several continents.

Research on the Perforating Algorithm Based on STL Files

NASA Astrophysics Data System (ADS)

Yuchuan, Han; Xianfeng, Zhu; Yunrui, Bai; Zhiwen, Wu

2018-04-01

In the process of making medical personalized external fixation brace, the 3D data file should be perforated to increase the air permeability and reduce the weight. In this paper, a perforating algorithm for 3D STL file is proposed, which can perforate holes, hollow characters and engrave decorative patterns on STL files. The perforating process is composed of three steps. Firstly, make the imaginary space surface intersect with the STL model, and reconstruct triangles at the intersection. Secondly, delete the triangular facets inside the space surface and make a hole on the STL model. Thirdly, triangulate the inner surface of the hole, and thus realize the perforating. Choose the simple space equations such as cylindrical and rectangular prism equations as perforating equations can perforate round holes and rectangular holes. Through the combination of different holes, lettering, perforating decorative patterns and other perforated results can be accomplished. At last, an external fixation brace and an individual pen container were perforated holes using the algorithm, and the expected results were reached, which proved the algorithm is feasible.

Forming three-dimensional closed shapes from two-dimensional soft ribbons by controlled buckling

PubMed Central

Aoki, Michio

2018-01-01

Conventional manufacturing techniques—moulding, machining and casting—exist to produce three-dimensional (3D) shapes. However, these industrial processes are typically geared for mass production and are not directly applicable to residential settings, where inexpensive and versatile tools are desirable. Moreover, those techniques are, in general, not adequate to process soft elastic materials. Here, we introduce a new concept of forming 3D closed hollow shapes from two-dimensional (2D) elastic ribbons by controlled buckling. We numerically and experimentally characterize how the profile and thickness of the ribbon determine its buckled shape. We find a 2D master profile with which various elliptical 3D shapes can be formed. More complex natural and artificial hollow shapes, such as strawberry, hourglass and wheel, can also be achieved via strategic design and pattern engraving on the ribbons. The nonlinear response of the post-buckling regime is rationalized through finite-element analysis, which shows good quantitative agreement with experiments. This robust fabrication should complement conventional techniques and provide a rich arena for future studies on the mechanics and new applications of elastic hollow structures. PMID:29515894

Development of educational image databases and e-books for medical physics training.

PubMed

Tabakov, S; Roberts, V C; Jonsson, B-A; Ljungberg, M; Lewis, C A; Wirestam, R; Strand, S-E; Lamm, I-L; Milano, F; Simmons, A; Deane, C; Goss, D; Aitken, V; Noel, A; Giraud, J-Y; Sherriff, S; Smith, P; Clarke, G; Almqvist, M; Jansson, T

2005-09-01

Medical physics education and training requires the use of extensive imaging material and specific explanations. These requirements provide an excellent background for application of e-Learning. The EU projects Consortia EMERALD and EMIT developed five volumes of such materials, now used in 65 countries. EMERALD developed e-Learning materials in three areas of medical physics (X-ray diagnostic radiology, nuclear medicine and radiotherapy). EMIT developed e-Learning materials in two further areas: ultrasound and magnetic resonance imaging. This paper describes the development of these e-Learning materials (consisting of e-books and educational image databases). The e-books include tasks helping studying of various equipment and methods. The text of these PDF e-books is hyperlinked with respective images. The e-books are used through the readers' own Internet browser. Each Image Database (IDB) includes a browser, which displays hundreds of images of equipment, block diagrams and graphs, image quality examples, artefacts, etc. Both the e-books and IDB are engraved on five separate CD-ROMs. Demo of these materials can be taken from www.emerald2.net.

Forming three-dimensional closed shapes from two-dimensional soft ribbons by controlled buckling

NASA Astrophysics Data System (ADS)

Aoki, Michio; Juang, Jia-Yang

2018-02-01

Conventional manufacturing techniques-moulding, machining and casting-exist to produce three-dimensional (3D) shapes. However, these industrial processes are typically geared for mass production and are not directly applicable to residential settings, where inexpensive and versatile tools are desirable. Moreover, those techniques are, in general, not adequate to process soft elastic materials. Here, we introduce a new concept of forming 3D closed hollow shapes from two-dimensional (2D) elastic ribbons by controlled buckling. We numerically and experimentally characterize how the profile and thickness of the ribbon determine its buckled shape. We find a 2D master profile with which various elliptical 3D shapes can be formed. More complex natural and artificial hollow shapes, such as strawberry, hourglass and wheel, can also be achieved via strategic design and pattern engraving on the ribbons. The nonlinear response of the post-buckling regime is rationalized through finite-element analysis, which shows good quantitative agreement with experiments. This robust fabrication should complement conventional techniques and provide a rich arena for future studies on the mechanics and new applications of elastic hollow structures.

PubMed

Cribier, B

2017-01-01

Atopic dermatitis has been described under many names before the XXth century, and first illustrated in the early XIXth century. This article presents historical images from the first volumes of Robert Willan to the Pratique dermatologique, the first encyclopedy published in 1900. Many accurate clinical descriptions of the disease can be found in the early treaties of dermatology, including the one published by Thomas Carrere in 1740. Since then, Alibert and Rayer in France, Hebra and Neumann in Vienna and Duhring and Fox in the USA illustrated their atlases with spectacular images of adults or children suffering from AD, or from other diseases that might have been considered as eczema infantile. Color engravings, color lithographs and black and white photographs showed with an increasing precision the semiology of AD, in the context of artistic representations of high quality, that have not been surpassed by modern photographs. At the beginning of the XXth century the clinical presentation, the course and heredity of the disease were perfectly established, introducing a new era of research in physiopathology and treatment in the following decades. © 2017 Elsevier Masson SAS. Tous droits réservés.

Commercial products that convey personal health information in emergencies.

PubMed

Potini, Vishnu C; Weerasuriya, Dilani N; Lowery-North, Douglas W; Kellermann, Arthur L

2011-12-01

Describe commercially available products and services designed to convey personal health information in emergencies. The search engine Google®, supplemented by print ads, was used to identify companies and organizations that offer relevant products and services to the general market. Disease-specific, health system, and health plan-specific offerings were excluded. Vendor web sites were the primary sources of information, supplemented by telephone and e-mail queries to sales representatives. Perfect inter-rater agreement was achieved. Thirty-nine unique vendors were identified. Eight sell engraved jewelry. Three offer an embossed card or pamphlet. Twelve supply USB drives with various features. Eleven support password-protected web sites. Five maintain national call centers. Available media differed markedly with respect to capacity and accessibility. Quoted prices ranged from a one-time expenditure of $3.50 to an annual fee of $200. Associated features and annual fees varied widely. A wide range of products and services exist to help patients convey personal health information. Health care providers should be familiar with their features, so they can access the information in a disaster or emergency.

[The fate of the wood of the Fabrica of 1543].

PubMed

Chevallier, Jacques; Neidhardt, Jean-Christophe

2014-01-01

Destiny of the wood blocks which have been used for engraving of illustrations of 1543 edition of the Fabrica is really outstanding. Several times lost and found again, they were transported over Europe in a surprising conservation state, for more than four centuries. Made by the famous Venitian wood-cutters, the blocks cross the Alps to join up Basel in Switzerland and Joannes Oporinus, the printer. Felix Platter uses 48 Vesalian wood-blocks for his own treaty in 1583. These blocks reappear in Augsburg in 1706, at the printer Andreas Maschenbauer's; they are found again by Von Wollter from Ingolstadt: they are used to illustrate Leveling's anatomy book in 1781 and 1783. Ingolstadt university and the blocks will be transferred to Landshut because of Napoleon's war, then to Munich in 1826. But in 1892 147 blocks are found again in the library; and are forgotten again. Forty years after, 230 blocks are discovered again! Icones anatomicae represent the last and fabulous edition made in 1934. The Second World War closes this epic with the library fire on July 13th 1944: none of these precious blocks remains today.

Automatic neutron dosimetry system based on fluorescent nuclear track detector technology.

PubMed

Akselrod, M S; Fomenko, V V; Bartz, J A; Haslett, T L

2014-10-01

For the first time, the authors are describing an automatic fluorescent nuclear track detector (FNTD) reader for neutron dosimetry. FNTD is a luminescent integrating type of detector made of aluminium oxide crystals that does not require electronics or batteries during irradiation. Non-destructive optical readout of the detector is performed using a confocal laser scanning fluorescence imaging with near-diffraction limited resolution. The fully automatic table-top reader allows one to load up to 216 detectors on a tray, read their engraved IDs using a CCD camera and optical character recognition, scan and process simultaneously two types of images in fluorescent and reflected laser light contrast to eliminate false-positive tracks related to surface and volume crystal imperfections. The FNTD dosimetry system allows one to measure neutron doses from 0.1 mSv to 20 Sv and covers neutron energies from thermal to 20 MeV. The reader is characterised by a robust, compact optical design, fast data processing electronics and user-friendly software. © The Author 2013. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Generation of fractional acoustic vortex with a discrete Archimedean spiral structure plate

NASA Astrophysics Data System (ADS)

Jia, Yu-Rou; Wei, Qi; Wu, Da-Jian; Xu, Zheng; Liu, Xiao-Jun

2018-04-01

Artificial structure plates engraved with discrete Archimedean spiral slits have been well designed to achieve fractional acoustic vortices (FAVs). The phase and pressure field distributions of FAVs are investigated theoretically and demonstrated numerically. It is found that the phase singularities relating to the integer and fractional parts of the topological charge (TC) result in dark spots in the upper half of the pressure field profile and a low-intensity stripe in the lower half of the pressure field profile, respectively. The dynamic progress of the FAV is also discussed in detail as TC increases from 1 to 2. With increasing TC from 1 to 1.5, the splitting of the phase singularity leads to the deviation of the phase of the FAV from the integer case and hence a new phase singularity occurs. As TC m increases from 1.5 to 2, two phase singularities of the FAV approach together and finally merge as a new central phase singularity. We further perform an experiment based on the Schlieren method to demonstrate the generation of the FAV.

History of evolution of the concept of medical ethics.

PubMed

Majumdar, Sisir K

2003-01-01

"Time present and time past are both perhaps present in time future and time future contained in time past".--Thomas Steams Eliot (1888-1965), Noble Literature Laureate, 1948. History and evolution of the concept of Medical Ethics is the classical example of this poetic expression. Virtually, every human society has some forces of myth to explain the origin of morality. Indian ethics was philosophical from its very birth. In the Vedas (1500 B.C.), ethics was an integral aspect of philosophical and religious speculation about the nature of reality. The Vedas says how people ought to live and is the oldest philosophical literature in the world. It was the first account of philosophical ethics in human history. The old Testament of (c. 200 B.C.) the Hebrew Bible (Greek--ta biblia--"the books") gives account of God giving the Ten Commandments--the oral and written Law engraved on tablets of Stone to Moses around 13th century B.C. on Mount Sinai (Arabic--Gebel Musa) the Mountain near the tip of the Sinai Peninsula in West Asia.

Creating compact and microscale features in paper-based devices by laser cutting.

PubMed

Mahmud, Md Almostasim; Blondeel, Eric J M; Kaddoura, Moufeed; MacDonald, Brendan D

2016-11-14

In this work we describe a fabrication method to create compact and microscale features in paper-based microfluidic devices using a CO 2 laser cutting/engraving machine. Using this method we are able to produce the smallest features with the narrowest barriers yet reported for paper-based microfluidic devices. The method uses foil backed paper as the base material and yields inexpensive paper-based devices capable of using small fluid sample volumes and thus small reagent volumes, which is also suitable for mass production. The laser parameters (power and laser head speed) were adjusted to minimize the width of hydrophobic barriers and we were able to create barriers with a width of 39 ± 15 μm that were capable of preventing cross-barrier bleeding. We generated channels with a width of 128 ± 30 μm, which we found to be the physical limit for small features in the chromatography paper we used. We demonstrate how miniaturizing of paper-based microfluidic devices enables eight tests on a single bioassay device using only 2 μL of sample fluid volume.

Flexible transparent conducting films with embedded silver networks composed of bimodal-sized nanoparticles for heater application.

PubMed

Park, Ji Sun; Song, Yookyung; Park, Daseul; Kim, Yeon-Won; Kim, Yoon Jin

2018-06-22

A facile one-pot synthetic method for preparing the Ag nanoparticle inks with a bimodal size distribution was newly devised and they were successfully employed as a conducting filler to form the metal-mesh type transparent conducting electrodes on the flexible substrate. Bimodal-sized Ag nanoparticles were synthesized through the polyol process, and their size variation was occurred via finely tuned composition ratio between Ag + ions and polymeric capping agents. The prepared bimodal-sized Ag nanoparticles exhibited the form of well-dispersed Ag nanoparticle inks without adding any dispersants and dispersion process. By filling the patterned micro-channels engraved on the flexible polymer substrate using a bimodal-sized Ag nanoparticle ink, a metal-mesh type transparent electrode (transmittance: 90% at 550 nm, haze: 1.5, area: 8 × 8 cm 2 ) was fabricated. By applying DC voltage to the mesh type electrode, a flexible transparent joule heater was successfully achieved with a performance of 4.5 °C s -1 heat-up rate at a low input power density.

Flexible transparent conducting films with embedded silver networks composed of bimodal-sized nanoparticles for heater application

NASA Astrophysics Data System (ADS)

Park, Ji Sun; Song, Yookyung; Park, Daseul; Kim, Yeon-Won; Kim, Yoon Jin

2018-06-01

A facile one-pot synthetic method for preparing the Ag nanoparticle inks with a bimodal size distribution was newly devised and they were successfully employed as a conducting filler to form the metal-mesh type transparent conducting electrodes on the flexible substrate. Bimodal-sized Ag nanoparticles were synthesized through the polyol process, and their size variation was occurred via finely tuned composition ratio between Ag+ ions and polymeric capping agents. The prepared bimodal-sized Ag nanoparticles exhibited the form of well-dispersed Ag nanoparticle inks without adding any dispersants and dispersion process. By filling the patterned micro-channels engraved on the flexible polymer substrate using a bimodal-sized Ag nanoparticle ink, a metal-mesh type transparent electrode (transmittance: 90% at 550 nm, haze: 1.5, area: 8 × 8 cm2) was fabricated. By applying DC voltage to the mesh type electrode, a flexible transparent joule heater was successfully achieved with a performance of 4.5 °C s‑1 heat-up rate at a low input power density.

Monitoring of pipelines in nuclear power plants by measuring laser-based mechanical impedance

NASA Astrophysics Data System (ADS)

Lee, Hyeonseok; Sohn, Hoon; Yang, Suyoung; Yang, Jinyeol

2014-06-01

Using laser-based mechanical impedance (LMI) measurement, this study proposes a damage detection technique that enables structural health monitoring of pipelines under the high temperature and radioactive environments of nuclear power plants (NPPs). The applications of conventional electromechanical impedance (EMI) based techniques to NPPs have been limited, mainly due to the contact nature of piezoelectric transducers, which cannot survive under the high temperature and high radiation environments of NPPs. The proposed LMI measurement technique aims to tackle the limitations of the EMI techniques by utilizing noncontact laser beams for both ultrasound generation and sensing. An Nd:Yag pulse laser is used for ultrasound generation, and a laser Doppler vibrometer is employed for the measurement of the corresponding ultrasound responses. For the monitoring of pipes covered by insulation layers, this study utilizes optical fibers to guide the laser beams to specific target locations. Then, an outlier analysis is adopted for autonomous damage diagnosis. Validation of the proposed LMI technique is carried out on a carbon steel pipe elbow under varying temperatures. A corrosion defect chemically engraved in the specimen is successfully detected.

[The dawn of radiotherapy, between strokes of genius, dramas and controversies].

PubMed

Cosset, J-M

2016-10-01

Radiotherapy is 120 years old. A few months only after the discoveries of Roentgen, Becquerel and Marie and Pierre Curie, a few scientists tried to use the newly discovered rays to treat patients. The question of the name of the first "radiation therapist" remains debated. Although often proposed, Emil Grubbé from Chicago seems to have been disqualified. Leopold Freund from Vienna treated a benign cutaneous lesion. Finally, Victor Despeignes from Lyon appears to be the most serious candidate, having treated in 1896 a gastric cancer, and obtaining a very significant tumour regression. The pioneers of radiotherapy paid a heavy tribute to the development of the specialty; a number of them appears on the - most probably incomplete - list of 352 names engraved on the monument dedicated to the "radiation martyrs" in Hamburg. We must keep in mind that it is only within a few years that a handful of brilliant pioneers built the foundations on which radiotherapy could emerge. Copyright © 2016 Société française de radiothérapie oncologique (SFRO). Published by Elsevier SAS. All rights reserved.

Ant-cave structured MnCO3/Mn3O4 microcubes by biopolymer-assisted facile synthesis for high-performance pseudocapacitors

NASA Astrophysics Data System (ADS)

Chandra Sekhar, S.; Nagaraju, Goli; Yu, Jae Su

2018-03-01

Porous and ant-cave structured MnCO3/Mn3O4 microcubes (MCs) were facilely synthesized via a biopolymer-assisted hydrothermal approach. Herein, chitosan was used as a natural biopolymer, which greatly controls the surface morphology and size of the prepared composite. The amino and hydroxyl group-functionalized chitosan engraves the outer surface of MCs during the hydrothermal process, which designs the interesting morphology of nanopath ways on the surface of MCs. When used as an electrode material for pseudocapacitors, the ant-cave structured MnCO3/Mn3O4 MCs showed superior energy storage values compared to the material prepared without chitosan in aqueous electrolyte solution. Precisely, the prepared ant-cave structured MnCO3/Mn3O4 MCs exhibited a maximum specific capacitance of 116.2 F/g at a current density of 0.7 A/g with an excellent cycling stability of 73.86% after 2000 cycles. Such facile and low-cost synthesis of pseudocapacitive materials with porous nanopaths is favorable for the fabrication of high-performance energy storage devices.

Long range inland-coastal networks during the Late Magdalenian: evidence for individual acquisition of marine resources at Andernach-Martinsberg, German Central Rhineland.

PubMed

Langley, Michelle C; Street, Martin

2013-05-01

Recent re-examination of the osseous material assemblage from Andernach-Martinsberg, Central Rhineland, has resulted in the identification of an implement manufactured from cetacean bone (probably whale). Argued to be the proximal half of a foreshaft, this artefact is not only one of few such projectile elements to be identified in Magdalenian deposits in northern Europe, but also demonstrates that the exploitation of marine raw materials for use in manufacturing projectile elements is not restricted to southern France, instead extending to at least inland Germany. Additionally, in conjunction with the appearance of marine molluscs and engravings of seals at Andernach, it can now be forcefully argued that this region formed part of an inland-coastal network during the Late Magdalenian and allows us for the first time to suggest that we can identify the movements of individuals transporting valued marine sourced raw materials and their personal experiences across this vast region. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

QR-on-a-chip: a computer-recognizable micro-pattern engraved microfluidic device for high-throughput image acquisition.

PubMed

Yun, Kyungwon; Lee, Hyunjae; Bang, Hyunwoo; Jeon, Noo Li

2016-02-21

This study proposes a novel way to achieve high-throughput image acquisition based on a computer-recognizable micro-pattern implemented on a microfluidic device. We integrated the QR code, a two-dimensional barcode system, onto the microfluidic device to simplify imaging of multiple ROIs (regions of interest). A standard QR code pattern was modified to arrays of cylindrical structures of polydimethylsiloxane (PDMS). Utilizing the recognition of the micro-pattern, the proposed system enables: (1) device identification, which allows referencing additional information of the device, such as device imaging sequences or the ROIs and (2) composing a coordinate system for an arbitrarily located microfluidic device with respect to the stage. Based on these functionalities, the proposed method performs one-step high-throughput imaging for data acquisition in microfluidic devices without further manual exploration and locating of the desired ROIs. In our experience, the proposed method significantly reduced the time for the preparation of an acquisition. We expect that the method will innovatively improve the prototype device data acquisition and analysis.

[The affinity between Le family of Tong Ren Tang and acu-moxibustion as viewed from Mian xue tang zhen jiu ji cheng (Mian Xuetang's Synthetic Work of Acu-moxibustion)].

PubMed

Huang, L X

2017-11-28

This compilation process of Mian xue tang zhen jiu ji cheng ( Mian Xuetang ' s Synthetic Work of Acu - moxibustion )was quite mysterious, the book's advent coincidentally met with several major historical events which made its value of decoding its historical functions far beyond its academic value. The editor of this book is Le Xianyang, the founder of Tong Ren Tang. While compiling this book, he also made a replica of Ming-Dynasty's Zhengtong bronze statue. More than 200 years later, Le Jingyu, the 12th generation of the Le family revised Ming Tang Tu inherited from his ancestors and engraved Ming Tang Tu on the stone for its standardization. This great achievement of Le family was no less than the recasting of the Tiansheng bronze statue and the reengraving Tong ren shu xue zhen jiu tu jing ( Illustrated Manual of Acupuncture Points of the Bronze Figure ) by support of state power for building the Beijing Imperial Hospital in the eighth year of the Zhengtong reign (1443).

Euler force actuation mechanism for siphon valving in compact disk-like microfluidic chips.

PubMed

Deng, Yongbo; Fan, Jianhua; Zhou, Song; Zhou, Teng; Wu, Junfeng; Li, Yin; Liu, Zhenyu; Xuan, Ming; Wu, Yihui

2014-03-01

Based on the Euler force induced by the acceleration of compact disk (CD)-like microfluidic chip, this paper presents a novel actuation mechanism for siphon valving. At the preliminary stage of acceleration, the Euler force in the tangential direction of CD-like chip takes the primary place compared with the centrifugal force to function as the actuation of the flow, which fills the siphon and actuates the siphon valving. The Euler force actuation mechanism is demonstrated by the numerical solution of the phase-field based mathematical model for the flow in siphon valve. In addition, experimental validation is implemented in the polymethylmethacrylate-based CD-like microfluidic chip manufactured using CO2 laser engraving technique. To prove the application of the proposed Euler force actuation mechanism, whole blood separation and plasma extraction has been conducted using the Euler force actuated siphon valving. The newly introduced actuation mechanism overcomes the dependence on hydrophilic capillary filling of siphon by avoiding external manipulation or surface treatments of polymeric material. The sacrifice for highly integrated processing in pneumatic pumping technique is also prevented by excluding the volume-occupied compressed air chamber.

Phylogenetic Analysis Shows That Neolithic Slate Plaques from the Southwestern Iberian Peninsula Are Not Genealogical Recording Systems

PubMed Central

García Rivero, Daniel; O'Brien, Michael J.

2014-01-01

Prehistoric material culture proposed to be symbolic in nature has been the object of considerable archaeological work from diverse theoretical perspectives, yet rarely are methodological tools used to test the interpretations. The lack of testing is often justified by invoking the opinion that the slippery nature of past human symbolism cannot easily be tackled by the scientific method. One such case, from the southwestern Iberian Peninsula, involves engraved stone plaques from megalithic funerary monuments dating ca. 3,500–2,750 B.C. (calibrated age). One widely accepted proposal is that the plaques are ancient mnemonic devices that record genealogies. The analysis reported here demonstrates that this is not the case, even when the most supportive data and techniques are used. Rather, we suspect there was a common ideological background to the use of plaques that overlay the southwestern Iberian Peninsula, with little or no geographic patterning. This would entail a cultural system in which plaque design was based on a fundamental core idea, with a number of mutable and variable elements surrounding it. PMID:24558384

Performance testing and results of the first Etec CORE-2564

NASA Astrophysics Data System (ADS)

Franks, C. Edward; Shikata, Asao; Baker, Catherine A.

1993-03-01

In order to be able to write 64 megabit DRAM reticles, to prepare to write 256 megabit DRAM reticles and in general to meet the current and next generation mask and reticle quality requirements, Hoya Micro Mask (HMM) installed in 1991 the first CORE-2564 Laser Reticle Writer from Etec Systems, Inc. The system was delivered as a CORE-2500XP and was subsequently upgraded to a 2564. The CORE (Custom Optical Reticle Engraver) system produces photomasks with an exposure strategy similar to that employed by an electron beam system, but it uses a laser beam to deliver the photoresist exposure energy. Since then the 2564 has been tested by Etec's standard Acceptance Test Procedure and by several supplementary HMM techniques to insure performance to all the Etec advertised specifications and certain additional HMM requirements that were more demanding and/or more thorough than the advertised specifications. The primary purpose of the HMM tests was to more closely duplicate mask usage. The performance aspects covered by the tests include registration accuracy and repeatability; linewidth accuracy, uniformity and linearity; stripe butting; stripe and scan linearity; edge quality; system cleanliness; minimum geometry resolution; minimum address size and plate loading accuracy and repeatability.

The king's animals and the king's books: the illustrations for the Paris Academy's Histoire des animaux.

PubMed

Guerrini, Anita

2010-07-01

This essay explores the place of natural philosophy among the patronage projects of Louis XIV, focusing on the Mémoires pour servir a l'histoire naturelle des animaux (or Histoire des animaux) of the 1670s, one of a number of works of natural philosophy to issue from Louis XIV's printing house. Questions particular to the Histoire des animaux include the interaction between text and image, the credibility and authority of images of exotic animals, and the relationship between comparative anatomy and natural history, and between human and animal anatomy. At the same time that the Histoire des animaux contributed to Jean-Baptiste Colbert's management of patronage and of Louis's image, it was a work of natural philosophy, representing the collaborative efforts of the new Paris Academy of Sciences. It examined natural history and comparative anatomy in new ways, and its illustrations broke new ground in their depiction of animals in a natural setting. However, the lavishly formatted books were presentation volumes and did not gain wide circulation until their republication in 1733. Sources consulted include Colbert's manuscript memoires on the royal printers and engravers.

Small parts: Crisóstomo Martínez (1638-1694), bone histology, and the visual making of body wholeness.

PubMed

Valverde, Nuria

2009-09-01

The Valencian engraver Crisóstomo Martínez (ca. 1638-1694) arrived in Paris in July 1687, commissioned to create an anatomical atlas. Impressed by Govard Bidloo's Anatomia humani corporis (1685), Martínez decided to make a comparable work on osteology. His unpublished atlas of anatomy was exceptional in its choice of topic, its quality, and its overall visual approach. Martínez's work revolves around the dissolving effects of microscopic study on the traditional understanding of the connections between parts and whole. Underlying his investigation into the most effective composition of an anatomical atlas was the idea of the self-organizing and complex nature of the body as itself a composition, an idea rooted in the way observation and judgment, the seen and the unseen, and notions about collections and communities were connected in the vanitas culture. This essay explores the links between Martínez's work and the cultures of a time in which observation and interpretation of the processes of death, decay, and fragmentation played a primary role in defining a common human nature around which notions of destiny could be articulated.

Real-time measurement of flow rate in microfluidic devices using a cantilever-based optofluidic sensor.

PubMed

Cheri, Mohammad Sadegh; Latifi, Hamid; Sadeghi, Jalal; Moghaddam, Mohammadreza Salehi; Shahraki, Hamidreza; Hajghassem, Hasan

2014-01-21

Real-time and accurate measurement of flow rate is an important reqirement in lab on a chip (LOC) and micro total analysis system (μTAS) applications. In this paper, we present an experimental and numerical investigation of a cantilever-based optofluidic flow sensor for this purpose. Two sensors with thin and thick cantilevers were fabricated by engraving a 2D pattern of cantilever/base on two polymethylmethacrylate (PMMA) slabs using a CO2 laser system and then casting a 2D pattern with polydimethylsiloxane (PDMS). The basic working principle of the sensor is the fringe shift of the Fabry-Pérot (FP) spectrum due to a changing flow rate. A Finite Element Method (FEM) is used to solve the three dimensional (3D) Navier-Stokes and structural deformation equations to simulate the pressure distribution, velocity and cantilever deflection results of the flow in the channel. The experimental results show that the thin and thick cantilevers have a minimum detectable flow change of 1.3 and 4 (μL min(-1)) respectively. In addition, a comparison of the numerical and experimental deflection of the cantilever has been done to obtain the effective Young's modulus of the thin and thick PDMS cantilevers.

A Novel Wounding Device Suitable for Quantitative Biochemical Analysis of Wound Healing and Regeneration of Cultured Epithelium

PubMed Central

Lan, Rongpei; Geng, Hui; Hwang, Yoon; Mishra, Pramod; Skloss, Wayne L.; Sprague, Eugene A.; Saikumar, Pothana; Venkatachalam, Manjeri

2010-01-01

We describe the fabrication and use of an in vitro wounding device that denudes cultured epithelium in patterns designed to leave behind strips or islands of cells sufficiently narrow or small to ensure that all remaining cells become rapidly activated and then migrate, dedifferentiate and proliferate in near synchrony. The design ensures that signals specific to regenerating cells do not become diluted by quiescent differentiated cells that are not affected by wound induced activation. The device consists of a flat circular disk of rubber engraved to produce alternating ridges and grooves in patterns of concentric circles or parallel lines. The disk is mounted at the end of a pneumatically controlled piston assembly. Application of controlled pressure and circular or linear movement of the disk on cultures produced highly reproducible wounding patterns. The near synchronous regenerative activity of cell bands or islands permitted the collection of samples large enough for biochemical studies to sensitively detect alterations involving mRNA for several early response genes and protein phosphorylation in major signaling pathways. The method is versatile, easy to use and reproducible, and should facilitate biochemical, proteomic and genomic studies of wound induced regeneration of cultured epithelium. PMID:20230600

[William Cheselden (1688-1752) and Gerard van der Gucht (1695-1776). Surgical technique, the art of printed images and controversy in the urology book of the XVIII century].

PubMed

Gómiz León, Juan José

2009-11-01

We review the printed work of the English anatomist and surgeon William Cheselden, with special attention to the chalcographic engravings which illustrated it, mainly those by Gerard van der Gucht and the miniaturist Jacob Schijnvoet, vendicating the valuable collaboration of illustrators and printers and their essential figurative contribution to explain the texts and make them easier to understand for the reader. These images were as important as the texts and contributed considerable artistic value to the work. Likewise, we present the bitter controversy caused in the English medical-surgical society of the time, most especially in the lithotomist or "urology" community, by the publication of the work entitled "The High Operation for the Stone"by W. Cheselden. The publication coincided chronologically with the second edition of "Lithotomia Douglassiana" by John Douglas, and the scathing criticism hurled against Cheselden, one of the prime examples of which was the publication of the book entitled "Lithotomus Castratus"; in the book, both works were revised meticulously by its author, collated, analysed in detail and compared against each other, publically indicating that Cheselden plagiarised Douglas.

The design and development of CO2 medium-level laser power calibration system for industrial and medical applications in Thailand

NASA Astrophysics Data System (ADS)

Nontapot, Kanokwan

2018-03-01

The carbon dioxide laser (CO2 laser) is one of the most useful and is the highest CW laser at the present. The laser produces infrared light at 10.6 um. Due to its high power, CO2 lasers are usually used in industrial applications such as cutting and welding, or for engraving at less power. CO2 lasers are also used widely in medical applications, such as laser surgery, skin resurfacing, and removing mold, due to water (biological tissue) absorb light at this wavelength very well. CO2 lasers are also used as LIDAR laser source for military range finding applications because of the transparency of the atmosphere to infrared light. Due to the increasing use of CO2 lasers laser in industrial and medical applications in Thailand, the National Institute of Metrology (Thailand) has set up a CO2 laser power calibration system and provide calibration service to customers this year. The service support calibration of medium-level laser power at wavelength of 10.6 um and at power range 100 mW-10W. The design and development of the calibration system will be presented.

[Pierre Pomet (1658-1699) and his Histoire des drogues (History of drugs) (1694 & 1735)].

PubMed

Bonnemain, Bruno

2016-09-01

Pierre Pomet is a Parisian, but as all great botanists, he liked travelling and bringing back sample of drugs that he was ultimately showing during his course at the Jardin des Plantes (Royal Herbs garden in Paris). Member of druggists and groceries storekeepers’ Community, he was not allowed to establish himself as an apothecary in Paris. It is as drug expert that he wrote and published in 1694 his “General History of Drugs, concerning herbs, animals and minerals, book enriched with more than 400 copper-plate engravings designed from nature : with explanations of their various names, their countries of origin, the way to differentiate them from falsified ones, and their properties, where one can see the errors coming from Ancients and modern writers ; the whole being very useful for the public”. This book was translated into English in 1712 and German in 1717. It is part of the reference books of the 17th century for pharmacy. In his introduction, Pierre Pomet explains that his goal is to avoid for drugs errors and falsifications that very frequent at that time. The book is then dedicated not only to physicians, apothecaries or students, etc., but also to all that used drugs.

Evaluation of portable Raman spectroscopy and handheld X-ray fluorescence analysis (hXRF) for the direct analysis of glyptics

NASA Astrophysics Data System (ADS)

Lauwers, D.; Candeias, A.; Coccato, A.; Mirao, J.; Moens, L.; Vandenabeele, P.

2016-03-01

In archaeometry, the advantages of a combined use of Raman spectroscopy and X-ray fluorescence spectroscopy are extensively discussed for applications such as the analysis of paintings, manuscripts, pottery, etc. Here, we demonstrate for the first time the advantage of using both techniques for analysing glyptics. These engraved gemstones or glass materials were originally used as stamps, to identify the owner, for instance on letters, but also on wine vessels. For this research, a set of 64 glyptics (42 Roman glass specimens and 22 modern ones), belonging to the collection of the museum 'Quinta das Cruzes' in Funchal (Madeira, Portugal), was analysed with portable Raman spectroscopy and handheld X-ray fluorescence (hXRF). These techniques were also used to confirm the gemological identification of these precious objects and can give extra information about the glass composition. Raman spectroscopy identifies the molecular composition as well as on the crystalline phases present. On the other hand, hXRF results show that the antique Roman glass samples are characterised with low Pb and Sn levels and that the modern specimens can be discriminated in two groups: lead-based and non-lead-based ones.

Bulk silica NIR blazed transmission gratings made by Silios technologies

NASA Astrophysics Data System (ADS)

Caillat, Amandine; Pascal, Sandrine; Tisserand, Stéphane; Dohlen, Kjetil; Grange, Robert; Sauget, Vincent; Gautier, Sophie

2017-11-01

In order to study the dark universe (energy and matter), EUCLID space mission will collect near infrared spectra and images of millions of galaxies. This massive measurement survey requires a slitless spectroscopic channel including GRISMs (for "Grating pRISMs") in NISP (Near Infrared SpectroPhotometer). Very special technical specifications are required for the grating manufacturing: large aperture, low groove frequency and blaze angle, line curvature. In addition, it has to withstand space environment. Therefore, in the frame of a R&D project funded by the CNES, we developed bulk silica gratings in close collaboration with the French company SILIOS Technologies. SILIOS delivered two resin-free blazed gratings with curved lines engraved directly into the fused silica substrate of 80mm and 108mm useful aperture. At LAM, we measured very high optical performances of these prototypes: <80% transmitted efficiency, <30nm RMS wavefront error, groove shape and roughness very close to theory and uniform over the useful aperture. In this paper, we give specifications of these gratings, we describe the manufacturing process developed by SILIOS Technologies, we present briefly optical setups and models allowing optical performances verifications at LAM and we show very encouraging results obtained on the two gratings.

Firefly: an optical lithographic system for the fabrication of holographic security labels

NASA Astrophysics Data System (ADS)

Calderón, Jorge; Rincón, Oscar; Amézquita, Ricardo; Pulido, Iván.; Amézquita, Sebastián.; Bernal, Andrés.; Romero, Luis; Agudelo, Viviana

2016-03-01

This paper introduces Firefly, an optical lithography origination system that has been developed to produce holographic masters of high quality. This mask-less lithography system has a resolution of 418 nm half-pitch, and generates holographic masters with the optical characteristics required for security applications of level 1 (visual verification), level 2 (pocket reader verification) and level 3 (forensic verification). The holographic master constitutes the main core of the manufacturing process of security holographic labels used for the authentication of products and documents worldwide. Additionally, the Firefly is equipped with a software tool that allows for the hologram design from graphic formats stored in bitmaps. The software is capable of generating and configuring basic optical effects such as animation and color, as well as effects of high complexity such as Fresnel lenses, engraves and encrypted images, among others. The Firefly technology gathers together optical lithography, digital image processing and the most advanced control systems, making possible a competitive equipment that challenges the best technologies in the industry of holographic generation around the world. In this paper, a general description of the origination system is provided as well as some examples of its capabilities.

Rapid constructions of microstructures for optical fiber sensors using a commercial CO2 laser system.

PubMed

Irawan, Rudi; Chuan, Tjin Swee; Meng, Tay Chia; Ming, Tan Khay

2008-06-27

Exposing an optical fiber core to the measurand surrounding the fiber is often used to enhance the sensitivity of an optical fiber sensor. This paper reports on the rapid fabrication of microstructures in an optical fiber using a CO₂ laser system which help exposing the optical fiber core to the measurand. The direct-write CO₂ laser system used is originally designed for engraving the polymeric material. Fabrications of microstructures such as in-fiber microhole, D-shaped fiber, in-fiber microchannel, side-sliced fiber and tapered fiber were attempted. The microstructures in the fibers were examined using a SEM and an optical microscope. Quality of microstructures shown by the SEM images and promising results from fluorescence sensor tests using in-fiber microchannels of 100μm width, 210μm depth and 10mm length show the prospect of this method for use in optical fiber sensor development. The direct-write CO₂ laser system is a flexible and fast machining tool for fabricating microstructures in an optical fiber, and can possibly be a replacement of the time consuming chemical etching and polishing methods used for microstructure fabrications of optical the fiber sensors reported in other literatures.

Rapid Constructions of Microstructures for Optical Fiber Sensors Using a Commercial CO2 Laser System

PubMed Central

Irawan, Rudi; Chuan, Tjin Swee; Meng, Tay Chia; Ming, Tan Khay

2008-01-01

Exposing an optical fiber core to the measurand surrounding the fiber is often used to enhance the sensitivity of an optical fiber sensor. This paper reports on the rapid fabrication of microstructures in an optical fiber using a CO2 laser system which help exposing the optical fiber core to the measurand. The direct-write CO2 laser system used is originally designed for engraving the polymeric material. Fabrications of microstructures such as in-fiber microhole, D-shaped fiber, in-fiber microchannel, side-sliced fiber and tapered fiber were attempted. The microstructures in the fibers were examined using a SEM and an optical microscope. Quality of microstructures shown by the SEM images and promising results from fluorescence sensor tests using in-fiber microchannels of 100μm width, 210μm depth and 10mm length show the prospect of this method for use in optical fiber sensor development. The direct-write CO2 laser system is a flexible and fast machining tool for fabricating microstructures in an optical fiber, and can possibly be a replacement of the time consuming chemical etching and polishing methods used for microstructure fabrications of optical the fiber sensors reported in other literatures. PMID:19662114

Parallel mapping of optical near-field interactions by molecular motor-driven quantum dots.

PubMed

Groß, Heiko; Heil, Hannah S; Ehrig, Jens; Schwarz, Friedrich W; Hecht, Bert; Diez, Stefan

2018-04-30

In the vicinity of metallic nanostructures, absorption and emission rates of optical emitters can be modulated by several orders of magnitude 1,2 . Control of such near-field light-matter interaction is essential for applications in biosensing 3 , light harvesting 4 and quantum communication 5,6 and requires precise mapping of optical near-field interactions, for which single-emitter probes are promising candidates 7-11 . However, currently available techniques are limited in terms of throughput, resolution and/or non-invasiveness. Here, we present an approach for the parallel mapping of optical near-field interactions with a resolution of <5 nm using surface-bound motor proteins to transport microtubules carrying single emitters (quantum dots). The deterministic motion of the quantum dots allows for the interpolation of their tracked positions, resulting in an increased spatial resolution and a suppression of localization artefacts. We apply this method to map the near-field distribution of nanoslits engraved into gold layers and find an excellent agreement with finite-difference time-domain simulations. Our technique can be readily applied to a variety of surfaces for scalable, nanometre-resolved and artefact-free near-field mapping using conventional wide-field microscopes.

KSC-05pd2648

NASA Image and Video Library

2005-12-07

KENNEDY SPACE CENTER, FLA. - A Florida quarter is prepared for installation on the New Horizons spacecraft in Kennedy Space Center's Payload Hazardous Servicing Facility. The new quarter, engraved with the "Gateway to Discovery" design, will accompany New Horizons on its 3-billion-mile journey to the planet Pluto and its moon, Charon. Although appropriate for the mission to carry the coin from the state that symbolizes space exploration, it will also serve a practical purpose: scientists are using the quarter as a spin-balance weight. New Horizons comprises seven scientific instruments that will characterize the global geology and geomorphology of Pluto and its moon Charon, map their surface compositions and temperatures, and examine Pluto's complex atmosphere. After that, flybys of Kuiper Belt objects from even farther in the solar system may be undertaken in an extended mission. New Horizons is the first mission in NASA's New Frontiers program of medium-class planetary missions. The spacecraft, designed for NASA by the Johns Hopkins University Applied Physics Laboratory in Laurel, Md., will launch aboard a Lockheed Martin Atlas V rocket and fly by Pluto and Charon as early as summer 2015. Photo Credit: Applied Physics Laboratory/George W. Rogers III

A learned artisan debates the system of the world: Le Clerc versus Mallemant de Messange.

PubMed

Rabinovitch, Oded

2017-12-01

Sébastien Le Clerc (1637-1714) was the most renowned engraver of Louis XIV's France. For the history of scientific publishing, however, Le Clerc represents a telling paradox. Even though he followed a traditional route based on classic artisanal training, he also published extensively on scientific topics such as cosmology and mathematics. While contemporary scholarship usually stresses the importance of artisanal writing as a direct expression of artisanal experience and know-how, Le Clerc's publications, and specifically the work on cosmology in his Système du monde (1706-1708), go far beyond this. By reconstructing the debate between Le Clerc and the professor Mallemant de Messange on the authorship of this 'system of the world', this article argues that Le Clerc's involvement in publishing ventures shaped his identity both as an artisan and as a scientific author. Whereas the Scientific Revolution supposedly heralded a change from the world of 'more or less' to the 'world of precision', this article shows how an artisan could be more 'precise' than the learned scholar whose claims he disputed, and points to the importance of the literary field as a useful lens for observing the careers of early modern scientific practitioners.

The Constellations of the Zodiac: Astronomy for Low Vision and Blind People

NASA Astrophysics Data System (ADS)

Garcia, B.; Cicero, A.; Farrando, M.; Bruno, P.

2006-08-01

One thinks, in general, there exist areas of the knowledge to which it is not possible to be acceded if one of the senses is diminished. Nevertheless, the reality is far from this false concept: it is not necessary to hear to compose music, nor to see to come near to the starred sky. This book has the purpose to introduce to the readers with visual difficulties the amazing world of astronomy, by means of the transmission of basic concepts of positional astronomy (cardinal points, Earth movements, apparent movement of the celestial sphere), with special emphasis in: movement of precession, the concept of stellar magnitude, its representation in celestial charts, and relation to mythology. On the other hand, the figures associated with the 13 constellations in the region of the plane of the ecliptic are described. The texts and the images are displayed in two formats: for visually diminished people, one worked on the basis of the original engravings of the Uranographia by Hevelius (1690). These were adapted and simplified for their better understanding, and a recommended font size. For blind people, we use tactile feature for the figures and Braille for the text.

Optometry: a discipline of knowledge

NASA Astrophysics Data System (ADS)

Kedzia, Boleslaw

1998-10-01

Optometry is a branch of science whose roots are in optics development as well as in physiology development. Among Polish scholars, whose names are firmly engraved in the history of optometry, two names should be mentioned first, they are Witelo (1237 - 1290) and Majer (1808 - 1899). Contemporary optometry began around the turn of the 19th and 20th century in the United States of America where some states erected legal regulations for those opticians who were performing refractions. Since 1993 optometry has been defined by the World Council of Optometry as a health care profession which is autonomous, educated and regulated (licensed/registered). Nevertheless, the question arises: Is optometry a separate part of science or is it only a set of practical procedures useful in vision care? In other words: does optometry have a system of definitions, laws and hypothesis with such logical interrelations that all less general statements may be derived from the most general? Even at this moment the system is not fully developed, yet we can say that optometry is a set of statements important and enough proved to be taught at the university level, being a category by itself and being sufficiently rich to be a subject for teaching as separate discipline.

Chemical composition and origin of black patinas on granite.

PubMed

Silva, Benita; Aira, Noelia; Martínez-Cortizas, Antonio; Prieto, Beatriz

2009-12-15

Black patinas from the surfaces of granite outcrops (including some with engravings) and granite buildings were analysed. Rock samples were also taken from areas of the same surfaces where there were no black patinas. The constituent elements of the granite rocks, elements of essentially biological origin (C, N, H) and other minor elements, including some typical from pollution, were all determined. The ratios between the concentrations of each element in the patinas and in the corresponding rock samples without patina were calculated in order to determine which elements form the patinas. The data were then examined by hierarchical cluster analysis and principal components analysis to establish the factors that determine the differences between samples. It was found that the elements that differentiate the patinas from the samples of rock without patina are those unrelated to granite, which indicates that, at least from a geochemical point of view, the rocky substrate does not affect patina formation. In all patinas analysed, the concentrations of carbon were higher than in the corresponding samples without patina; there were also relatively higher concentrations of sulphur, phosphorus, chlorine, calcium, etc. in some patinas, depending on the situation of the outcrop or monument.

The Final Days of Paracas in Cerro del Gentil, Chincha Valley, Peru

PubMed Central

2016-01-01

This article describes and analyzes a highly significant archaeological context discovered in a late Paracas (400–200 BCE) sunken patio in the monumental platform mound of Cerro Gentil, located in the Chincha Valley, Peru. This patio area was used for several centuries for ritual activities, including large-scale feasting and other public gatherings. At one point late in this historical sequence people deposited a great deal of objects in what is demonstrably a single historical event. This was quickly followed by a series of minor events stratigraphically immediately above this larger event. This entire ritual process included the consumption of liquids and food, and involved the offering of whole pottery, pottery fragments, botanical remains, bone, lithics, baskets, pyro-engraved gourds, mummies, and other objects. We interpret these events as an “abandonment ceremony” or “termination ritual” during the late Paracas period, one that may have lasted for weeks or even months. The subsequent Topará occupation at the site (ca. 200 BCE- AD 100) involved the architectural enhancement of the mound area, but the pattern of use of the patio itself ended. Such a termination ritual signals a reorganization in the regional political structure of Paracas society. PMID:27144824

Laser micro-structuring of surfaces for applications in materials and biomedical science

NASA Astrophysics Data System (ADS)

Sarzyński, Antoni; Marczak, Jan; Strzelec, Marek; Rycyk, Antoni; CzyŻ, Krzysztof; Chmielewska, Danuta

2016-12-01

Laser radiation is used, among others, for surface treatment of various materials. At the Institute of Optoelectronics, under the direction of the late Professor Jan Marczak, a number of works in the field of laser materials processing were performed. Among them special recognition deserves flagship work of Professor Jan Marczak: implementation in Poland laser cleaning method of artworks. Another big project involved the direct method of laser interference lithography. These two projects have already been widely discussed in many national and international scientific conferences. They will also be discussed at SLT2016. In addition to these two projects in the Laboratory of Lasers Applications many other works have been carried out, some of which will be separately presented at the SLT2016 Conference. These included laser decorating of ceramics and glass (three projects completed in cooperation with the Institute of Ceramics and Building Materials), interference structuring medical implants (together with the Warsaw University of Technology), testing the adhesion of thin layers (project implemented together with IFTR PAS), structuring layers of DLC for growing endothelial cells (together with IMMS PAS), engraving glass for microfluidic applications, metal marking, sapphire cutting and finally the production of microsieves for separating of blood cells.

Preparation of a new electro-optic polymer cross-linkable via copper-free thermal Huisgen cyclo-addition and fabrication of optical waveguides by Reactive Ion Etching.

PubMed

Cabanetos, Clément; Mahé, Hind; Blart, Errol; Pellegrin, Yann; Montembault, Véronique; Fontaine, Laurent; Adamietz, Frédéric; Rodriguez, Vincent; Bosc, Dominique; Odobel, Fabrice

2011-06-01

High-quality trails of ridge waveguides were successfully fabricated using a new cross-linkable polymer (PCC01) by UV photolithography followed by Reactive-Ion Etching (RIE) process. The cross-linking reaction of PCC01 is based on the copper-free Huisgen cyclo-addition between an azide and an acetylene group. The new cross-linkable polymer (PCC01) consists of a structural modification of the previously described materials (Scarpaci et al. Polym. Chem.2011, 2, 157), because the ethynyl group is functionalized by a methyl group instead of the TMS protecting group. This feature prevents the formation of silica (SiO(2)) generated by trimethylsilyl groups and which was stopping the engraving process before completion. Herein, we describe the synthesis, the NLO characterizations, and the fabrication of a high-quality ridge waveguide with PCC01. The new cross-linkable polymer PCC01 not only solves the problems encountered with our previously described polymers, but also presents an enhancement of the electro-optic stability, because d(33) coefficients up to 30 pm/V stable at 150 °C were recorded. © 2011 American Chemical Society

Micromolded gelatin hydrogels for extended culture of engineered cardiac tissues.

PubMed

McCain, Megan L; Agarwal, Ashutosh; Nesmith, Haley W; Nesmith, Alexander P; Parker, Kevin Kit

2014-07-01

Defining the chronic cardiotoxic effects of drugs during preclinical screening is hindered by the relatively short lifetime of functional cardiac tissues in vitro, which are traditionally cultured on synthetic materials that do not recapitulate the cardiac microenvironment. Because collagen is the primary extracellular matrix protein in the heart, we hypothesized that micromolded gelatin hydrogel substrates tuned to mimic the elastic modulus of the heart would extend the lifetime of engineered cardiac tissues by better matching the native chemical and mechanical microenvironment. To measure tissue stress, we used tape casting, micromolding, and laser engraving to fabricate gelatin hydrogel muscular thin film cantilevers. Neonatal rat cardiac myocytes adhered to gelatin hydrogels and formed aligned tissues as defined by the microgrooves. Cardiac tissues could be cultured for over three weeks without declines in contractile stress. Myocytes on gelatin had higher spare respiratory capacity compared to those on fibronectin-coated PDMS, suggesting that improved metabolic function could be contributing to extended culture lifetime. Lastly, human induced pluripotent stem cell-derived cardiac myocytes adhered to micromolded gelatin surfaces and formed aligned tissues that remained functional for four weeks, highlighting their potential for human-relevant chronic studies. Copyright © 2014 Elsevier Ltd. All rights reserved.

Neural system applied on an invariant industrial character recognition

NASA Astrophysics Data System (ADS)

Lecoeuche, Stephane; Deguillemont, Denis; Dubus, Jean-Paul

1997-04-01

Besides the variety of fonts, character recognition systems for the industrial world are confronted with specific problems like: the variety of support (metal, wood, paper, ceramics . . .) as well as the variety of marking (printing, engraving, . . .) and conditions of lighting. We present a system that is able to solve a part of this problem. It implements a collaboration between two neural networks. The first network specialized in vision allows the system to extract the character from an image. Besides this capability, we have equipped our system with characteristics allowing it to obtain an invariant model from the presented character. Thus, whatever the position, the size and the orientation of the character during the capture are, the model presented to the input of the second network will be identical. The second network, thanks to a learning phase, permits us to obtain a character recognition system independent of the type of fonts used. Furthermore, its capabilities of generalization permit us to recognize degraded and/or distorted characters. A feedback loop between the two networks permits the first one to modify the quality of vision.The cooperation between these two networks allows us to recognize characters whatever the support and the marking.

Micromolded Gelatin Hydrogels for Extended Culture of Engineered Cardiac Tissues

PubMed Central

McCain, Megan L.; Agarwal, Ashutosh; Nesmith, Haley W.; Nesmith, Alexander P.; Parker, Kevin Kit

2014-01-01

Defining the chronic cardiotoxic effects of drugs during preclinical screening is hindered by the relatively short lifetime of functional cardiac tissues in vitro, which are traditionally cultured on synthetic materials that do not recapitulate the cardiac microenvironment. Because collagen is the primary extracellular matrix protein in the heart, we hypothesized that micromolded gelatin hydrogel substrates tuned to mimic the elastic modulus of the heart would extend the lifetime of engineered cardiac tissues by better matching the native chemical and mechanical microenvironment. To measure tissue stress, we used tape casting, micromolding, and laser engraving to fabricate gelatin hydrogel muscular thin film cantilevers. Neonatal rat cardiac myocytes adhered to gelatin hydrogels and formed aligned tissues as defined by the microgrooves. Cardiac tissues could be cultured for over three weeks without declines in contractile stress. Myocytes on gelatin had higher spare respiratory capacity compared to those on fibronectin-coated PDMS, suggesting that improved metabolic function could be contributing to extended culture lifetime. Lastly, human induced pluripotent stem cell-derived cardiac myocytes adhered to micromolded gelatin surfaces and formed aligned tissues that remained functional for four weeks, highlighting their potential for human-relevant chronic studies. PMID:24731714

Embossing of optical document security devices

NASA Astrophysics Data System (ADS)

Muke, Sani

2004-06-01

Embossing in the transparent window area of polymer banknotes, such as those seen on the Australian, New Zealand and Romanian currencies, have enormous potential for the development of novel optical security devices. The intaglio printing process can provide an efficient means for embossing of optical security structures such as micro lenses. Embossed micro lens arrays in the transparent window of a polymer banknote can be folded over a corresponding printed image array elsewhere on the note to reveal a series of moire magnified images. Analysis of samples of embossed micro lenses showed that the engraving side and impression side had a similar embossed profile. The embossed micro lens profiles were modelled using Optalix-LX commercial optical ray tracing software in order to determine the focal length of the lenses and compare with the focal length of desired embossed lenses. A fundamental understanding of how the polymer deforms during the embossing process is critical towards developing a micro lens embossing tool which can achieve the desired embossed micro lenses. This work also looks at extending the early research of the Intaglio Research Group (IRG) to better understand the embossibility of polymer substrates such as biaxially oriented polypropylene (BOPP).

Patterned layers of adsorbed extracellular matrix proteins: influence on mammalian cell adhesion.

PubMed

Dupont-Gillain, C C; Alaerts, J A; Dewez, J L; Rouxhet, P G

2004-01-01

Three patterned systems aiming at the control of mammalian cell behavior are presented. The determinant feature common to these systems is the spatial distribution of extracellular matrix (ECM) proteins (mainly collagen) on polymer substrates. This distribution differs from one system to another with respect to the scale at which it is affected, from the supracellular to the supramolecular scale, and with respect to the way it is produced. In the first system, the surface of polystyrene was oxidized selectively to form micrometer-scale patterns, using photolithography. Adsorption of ECM proteins in presence of a competitor was enhanced on the oxidized domains, allowing selective cell adhesion to be achieved. In the second system, electron beam lithography was used to engrave grooves (depth and width approximately 1 microm) on a poly(methyl methacrylate) (PMMA) substratum. No modification of the surface chemistry associated to the created topography could be detected. Cell orientation along the grooves was only observed when collagen was preadsorbed on the substratum. In the third system, collagen adsorbed on PMMA was dried in conditions ensuring the formation of a nanometer-scale pattern. Cell adhesion was enhanced on such patterned collagen layers compared to smooth collagen layers.

Euler force actuation mechanism for siphon valving in compact disk-like microfluidic chips

PubMed Central

Deng, Yongbo; Fan, Jianhua; Zhou, Song; Zhou, Teng; Wu, Junfeng; Li, Yin; Liu, Zhenyu; Xuan, Ming; Wu, Yihui

2014-01-01

Based on the Euler force induced by the acceleration of compact disk (CD)-like microfluidic chip, this paper presents a novel actuation mechanism for siphon valving. At the preliminary stage of acceleration, the Euler force in the tangential direction of CD-like chip takes the primary place compared with the centrifugal force to function as the actuation of the flow, which fills the siphon and actuates the siphon valving. The Euler force actuation mechanism is demonstrated by the numerical solution of the phase-field based mathematical model for the flow in siphon valve. In addition, experimental validation is implemented in the polymethylmethacrylate-based CD-like microfluidic chip manufactured using CO2 laser engraving technique. To prove the application of the proposed Euler force actuation mechanism, whole blood separation and plasma extraction has been conducted using the Euler force actuated siphon valving. The newly introduced actuation mechanism overcomes the dependence on hydrophilic capillary filling of siphon by avoiding external manipulation or surface treatments of polymeric material. The sacrifice for highly integrated processing in pneumatic pumping technique is also prevented by excluding the volume-occupied compressed air chamber. PMID:24753736

Miniaturized flow system based on enzyme modified PMMA microreactor for amperometric determination of glucose.

PubMed

Cerdeira Ferreira, Luís Marcos; da Costa, Eric Tavares; do Lago, Claudimir Lucio; Angnes, Lúcio

2013-09-15

This paper describes the development of a microfluidic system having as main component an enzymatic reactor constituted by a microchannel assembled in poly(methyl methacrylate) (PMMA) substrate connected to an amperometric detector. A CO2 laser engraving machine was used to make the channels, which in sequence were thermally sealed. The internal surfaces of the microchannels were chemically modified with polyethyleneimine (PEI), which showed good effectiveness for the immobilization of the glucose oxidase enzyme using glutaraldehyde as crosslinking agent, producing a very effective microreactor for the detection of glucose. The hydrogen peroxide generated by the enzymatic reaction was detected in an electrochemical flow cell localized outside of the reactor using a platinum disk as the working electrode. The proposed system was applied to the differential amperometric determination of glucose content in soft drinks showing good repeatability (DPR=1.72%, n=50), low detection limit (1.40×10(-6)molL(-1)), high sampling frequency (calculated as 345 samples h(-1)), and relatively good stability for long-term use. The results were in close agreement with those obtained by the classical spectrophotometric method utilized to quantify glucose in biological fluids. Copyright © 2013 Elsevier B.V. All rights reserved.

Drropulli Stone and Gjirokastra World Heritage in Albania

NASA Astrophysics Data System (ADS)

Serjani, Afat; Kramar, Sabina

2013-04-01

Ancient Gjirokastra City and Dervician stone deposit, there are located next to each other, in south of Albania, at foots of eastern slope of "Wide Mountain". Building stone it is represented by micritic limestone of white, red and blue colour, formed during Palaeocene-Eocene Period. It contains fossils of rounded forms and it is known and exploited since the ancient times. Argjirokastra, Argjiro's City, appeared since the IV-th Century BC (V.Tola, 2011). Stone City has in its centre Majestic Fortress of a big cruiser view, which is seen from long distance, from all sides of Drinos Valley. "This Majestic Monument of Albanian vigour has an astonishing elegance" has written E. Hoxha (1983). Watching Gjirokastra you will remind "Chronic in Stone", the book of Ismail Kadare, great writer, born in Gjirokastra. All buildings here are of stone. The Large Fortress and high houses as castles are built by stone, and covered by stone tiles. The walls and minarets of religious buildings are of stone. The gates of houses and yards are of engraved stone, protected by metallic nets of artistic forms. The house's walls are built by big stone, while the walls of yards are by small stone of white colour, some times intercalated with lines of red, blue stone. The combination of different colour stone is another one artistic beauty of walls. The roads are paved by black cobblestones of flysch sandstone for protection by slips, some times combined with white limestone mosaics. Steps of houses and roads are by white stone, often reworked masterfully. "Such stones, reworked by very fine skilfully, can not be found in any other place of the World, only in Anadoll" has written on 1 665 Evliya Celepi (2003). Buildings are of specific architecture and by good style. The accounts of the basis are done to keep "houses as castle". The walls have wood antiseismic layers. The architecture of houses, gates, angles, windows, with predomination of arc forms, with engraved stones and ornaments it is everywhere evident. The ceilings of houses there are with artistic works and ornaments of different times. Houses are of balconies with balustrades, and from characteristic windows are hanging down flowers. Architecture feature of Medieval period, there are symbolised in most of houses and in Qafa e Pazarit ("Bazaar Pass"), where are crossed all roads of the ancient City. From the Fortress below your foots there are different parts of stone City. If you like to be astonished, please, get up to the Keculla Point and watch the Stone City, Drinos Valley, and Lunxheria Mountains! In Gjirokastra Region there are Antigonea Archaeological Park and Sofratika Amphitheatre. Gjirokastra has a very rich geoheritage and bioheritage such as: Viroi artesian spring, Skotini Cave, Cajupi Field Landscape etc. Since 1961, Gjirokastra was proclaimed Museum City under the protection, and on 2005 was included in UNESCO World Cultural Heritage.

Resealable, optically accessible, PDMS-free fluidic platform for ex vivo interrogation of pancreatic islets.

PubMed

Lenguito, Giovanni; Chaimov, Deborah; Weitz, Jonathan R; Rodriguez-Diaz, Rayner; Rawal, Siddarth A K; Tamayo-Garcia, Alejandro; Caicedo, Alejandro; Stabler, Cherie L; Buchwald, Peter; Agarwal, Ashutosh

2017-02-28

We report the design and fabrication of a robust fluidic platform built out of inert plastic materials and micromachined features that promote optimized convective fluid transport. The platform is tested for perfusion interrogation of rodent and human pancreatic islets, dynamic secretion of hormones, concomitant live-cell imaging, and optogenetic stimulation of genetically engineered islets. A coupled quantitative fluid dynamics computational model of glucose stimulated insulin secretion and fluid dynamics was first utilized to design device geometries that are optimal for complete perfusion of three-dimensional islets, effective collection of secreted insulin, and minimization of system volumes and associated delays. Fluidic devices were then fabricated through rapid prototyping techniques, such as micromilling and laser engraving, as two interlocking parts from materials that are non-absorbent and inert. Finally, the assembly was tested for performance using both rodent and human islets with multiple assays conducted in parallel, such as dynamic perfusion, staining and optogenetics on standard microscopes, as well as for integration with commercial perfusion machines. The optimized design of convective fluid flows, use of bio-inert and non-absorbent materials, reversible assembly, manual access for loading and unloading of islets, and straightforward integration with commercial imaging and fluid handling systems proved to be critical for perfusion assay, and particularly suited for time-resolved optogenetics studies.

Development and assessment of a fiber-optic liquid level sensor with long-period fiber grating and Shewhart control charts

NASA Astrophysics Data System (ADS)

Wang, Jian-Neng; Jan, Chen-Han; Tang, Jaw-Luen; Wu, Wei-Te; Chen, Der-Cheng; Chen, Chien-Hsing; Syu, Jial-Yan; Luo, Ching-Ying

2011-12-01

This paper presents the development and assessment of a liquid level sensor using long-period fiber grating (LPFG) technology and Shewhart control charts. The 22-mm LPFGs were fabricated with the point-by-point CO2 laser engraving method. This sensor was designed in such a way that it could be moved up and down with a position controller. The experimental section covered LPFG position sensing test, liquid level detection capacity and reliability measurements, and sensing resolution evaluation. LPFG position sensing test was studied and confirmed by the resonance wavelength shifts which were significantly generated when 75% of the LPFG was immersed in water. There were ten groups of different liquid level capacity testing and each group underwent ten repeated measurements. Based on Shewhart control charts including an X-bar chart, s chart, and R chart, the results showed all measurands within the upper and lower control limits. This sensor was reliable and the liquid level could be measured at least 1000 mm. The transmission loss versus the percent of immersion of the LPFG sensor for water and green tea was used to study the sensing resolution. The findings show the LPFG-based liquid sensor had at least 1000-mm level measurement capacity and about 2-mm resolution.

The Melencolia Manifesto

NASA Astrophysics Data System (ADS)

Finkelstein, David Ritz

2016-12-01

Few artworks have been the subject of more extensive modern interpretation than Melencolia I by renowned artist, mathematician, and scientist Albrecht Dürer (1514). And yet, did each of these art experts and historians miss a secret manifesto that Dürer included within the engraving? This is the first work to decrypt secrets within Melencolia I based not on guesswork, but Dürer's own writings, other subliminal artists that inspired him (i.e., Leonardo da Vinci), the Jewish and Christian Bibles, and books that inspired Dürer (De Occulta Philosophia and the Hieorglyphica). To read the covert message of Melencolia I is to understand that Dürer was a humanist in his interests in mathematics, science, poetry, and antiquity. This book recognizes his unparalleled power with the burin, his mathematical skill in perspective, his dedication to precise language, and his acute observation of nature. Melencolia I may also be one of the most controversial (and at the time most criminal) pieces of art as it hid Dürer's disdain for the hierarchy of the Catholic Church, the Kaiser, and the Holy Roman Empire from the general public for centuries. This book closely ties the origins of philosophy (science) and the work of a Renaissance master together, and will be of interest for anyone who loves scientific history, art interpretation, and secret manifestos.

Stretch-and-release fabrication, testing and optimization of a flexible ceramic armor inspired from fish scales.

PubMed

Martini, Roberto; Barthelat, Francois

2016-10-13

Protective systems that are simultaneously hard to puncture and compliant in flexion are desirable, but difficult to achieve because hard materials are usually stiff. However, we can overcome this conflicting design requirement by combining plates of a hard material with a softer substrate, and a strategy which is widely found in natural armors such as fish scales or osteoderms. Man-made segmented armors have a long history, but their systematic implementation in a modern and a protective system is still hampered by a limited understanding of the mechanics and the design of optimization guidelines, and by challenges in cost-efficient manufacturing. This study addresses these limitations with a flexible bioinspired armor based on overlapping ceramic scales. The fabrication combines laser engraving and a stretch-and-release method which allows for fine tuning of the size and overlap of the scales, and which is suitable for large scale fabrication. Compared to a continuous layer of uniform ceramic, our fish-scale like armor is not only more flexible, but it is also more resistant to puncture and more damage tolerant. The proposed armor is also about ten times more puncture resistant than soft elastomers, making it a very attractive alternative to traditional protective equipment.

Risk-based targeting: A new approach in environmental protection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fox, C.A.

1995-12-31

Risk-based targeting has recently emerged as an effective tool to help prioritize efforts to identify and manage geographic areas, chemicals, facilities, and agricultural activities that cause the most environmental degradation. This paper focuses on how the Environmental Protection Agency (EPA) has recently used risk-based targeting to identify and screen Federal, industrial, commercial and municipal facilities which contribute to probable human health (fish consumption advisories and contaminated fish tissue) and aquatic life (contaminated sediments) impacts. Preliminary results identified several hundred potential contributors of problem chemicals to probable impacts within the same river reach in 1991--93. Analysis by industry sector showed thatmore » the majority of the facilities identified were publicly owned treatment works (POTWs), in addition to industry organic and inorganic chemical manufacturers, petroleum refineries, and electric services, coatings, engravings, and allied services, among others. Both compliant and non-compliant potentially contributing facilities were identified to some extent in all EPA regions. Additional results identifying possible linkages of other pollutant sources to probable impacts, as well as estimation of potential exposure of these contaminants to minority and/or poverty populations are also presented. Out of these analyses, a number of short and long-term strategies are being developed that EPA may use to reduce loadings of problem contaminants to impacted waterbodies.« less

When ancestral heritage is a source of discomfort: culture, pre-object relatedness, and self-alienation.

PubMed

Kradin, Richard L

2012-04-01

The ancestral claims on an individual can evoke mental conflict when they involve separating from an ethnic group whose beliefs and customs are devalued by the dominant culture. However, these claims are engraved on the psyche early in development by caretakers to the level of pre-object relatedness, where contents and affect tones are implicit and may be unavailable for later psychoanalytical interventions. In addition, as the anthropologist Clifford Geertz notes, one's culture of origin precedes the development of psyche and creates its own set of claims that must be renegotiated when one encounters a different domain of cultural symbols, a confrontation that can produce psychological dissonance and self-alienation. In this paper, three cases are examined in which mental conflicts were evoked by attempts at divesting ancestral claims in response to conscious efforts to assimilate into the dominant culture. These patients suffered from separation guilt and unstable self-esteem and reported dream imagery suggesting psychological imbalance. The requirement to carefully delineate the ancestral claims on psyche as well as those contents and affects that may not be accessible to therapeutic intervention is emphasized, and the importance of compromise and acceptance with respect to the psychological demands of the unconscious are considered. 2012, The Society of Analytical Psychology.

[In Process Citation].

PubMed

Krafft, Fritz

2015-01-01

Analysing all the surviving reports and mentions of the supposed unicorn discovered in the year 1663 near Quedlinburg, this paper replies to the question: "Who reconstructed the skeleton of the unicorn from a find of bones, O. von Guericke or G. W. Leibniz?" and diagnoses that neither of them did so. The author of the first report with a figure was Johannes Meyer, astronomer and treasurer of the Abbes Superior of Quedlinburg; and his German text had been translated by both partly in different ways (Guericke's Experimenta nova, printed in 1672 and used by Leibniz; Leibniz's Protogaea, first printed posthumously in 1749). Discovery, excavation, salvage and reconstruction of the unicorn were ascribed to Guericke only by Othenio Abel (for the first time in 1918 and thereafter on many occasions) without indicating any source for that. His story of the supposed discovery since then has been embellished with a lot of imagination further and further. However, Leibniz himself wrote in his Protogaea, that a figure of the unicorn skeleton (which Guericke does not reproduce) had been sent to him together with a report (by J. Meyer from Quedlinburg); and this figure he and his engraver Nicholas Seeländer 'corrected' and completed in accordance with their own imagination of a unicorn's build in 1716 to illustrate the Protogaea (M. B. Valentini printed a copy of Meyer's original in 1704).

Highly efficient TiO2-based microreactor for photocatalytic applications.

PubMed

Krivec, Matic; Žagar, Kristina; Suhadolnik, Luka; Čeh, Miran; Dražić, Goran

2013-09-25

A photocatalytic, TiO2-based microreactor is designed and fabricated on a metal-titanium foil. The microchannel is mechanically engraved in the substrate foil, and a double-layered TiO2 anatase film is immobilized on its inner walls with a two-step synthesis, which included anodization and a hydrothermal treatment. X-ray diffraction (XRD) and scanning electron microscopy (SEM) confirm the presence of an approximately 10-μm-thick layer of titania nanotubes and anatase nanoparticles. The SEM and transmission electron microscopy (TEM) of the cross sections show a dense interface between the titanium substrate and the TiO2 nanotubes. An additional layer of TiO2-anatase nanoparticles on the top of the film provides a large, photocatalytic surface area. The metal-titanium substrate with a functionalized serpentine channel is sealed with UV-transparent Plexiglas, and four 0.8-mW UV LEDs combined with a power controller on a small printed-circuit board are fixed over the substrate. The photocatalytic activity and the kinetic properties for the degradation of caffeine are provided, and the longer-term stability of the TiO2 film is evaluated. The results show that after 6 months of use and 3600 working cycles the microreactor still exhibits 60% of its initial efficiency.

Getting started with Open-Hardware: Development and Control of Microfluidic Devices

PubMed Central

da Costa, Eric Tavares; Mora, Maria F.; Willis, Peter A.; do Lago, Claudimir L.; Jiao, Hong; Garcia, Carlos D.

2014-01-01

Understanding basic concepts of electronics and computer programming allows researchers to get the most out of the equipment found in their laboratories. Although a number of platforms have been specifically designed for the general public and are supported by a vast array of on-line tutorials, this subject is not normally included in university chemistry curricula. Aiming to provide the basic concepts of hardware and software, this article is focused on the design and use of a simple module to control a series of PDMS-based valves. The module is based on a low-cost microprocessor (Teensy) and open-source software (Arduino). The microvalves were fabricated using thin sheets of PDMS and patterned using CO2 laser engraving, providing a simple and efficient way to fabricate devices without the traditional photolithographic process or facilities. Synchronization of valve control enabled the development of two simple devices to perform injection (1.6 ± 0.4 μL/stroke) and mixing of different solutions. Furthermore, a practical demonstration of the utility of this system for microscale chemical sample handling and analysis was achieved performing an on-chip acid-base titration, followed by conductivity detection with an open-source low-cost detection system. Overall, the system provided a very reproducible (98%) platform to perform fluid delivery at the microfluidic scale. PMID:24823494

Commercial and industrial applications of color ink jet: a technological perspective

NASA Astrophysics Data System (ADS)

Dunand, Alain

1996-03-01

In just 5 years, color ink-jet has become the dominant technology for printing color images and graphics in the office and home markets. In commercial printing, the traditional printing processes are being influenced by new digital techniques. Color ink-jet proofing, and concepts such as computer to film/plate or digital processes are contributing to the evolution of the industry. In industrial color printing, the penetration of digital techniques is just beginning. All widely used conventional contact printing technologies involve mechanical printing forms including plates, screens or engraved cylinders. Such forms, which need to be newly created and set up for each job, increase costs. In our era of fast changing customer demands, growing needs for customization, and increasing use of digital exchange of information, the commercial and industrial printing markets represent an enormous potential for digital printing technologies. The adoption characteristics for the use of color ink-jet in these industries are discussed. Examples of color ink-jet applications in the fields of billboard printing, floor/wall covering decoration, and textile printing are described. The requirements on print quality, productivity, reliability, substrate compatibility, and color lead to the consideration of various types of ink-jet technologies. Key technical enabling factors and directions for future improvements are presented.

Chronicler's Induction Ceremony

NASA Image and Video Library

2017-05-05

"The Chroniclers," a program at NASA’s Kennedy Space Center, Florida, recognizing those who helped spread news of American space exploration, officially added six new names to its wall of fame in a ceremony on May 5, 2017. This year’s honorees are, in alphabetical order: Bruce Hall, veteran CBS News and NBC News correspondent and producer (deceased); Scott Harris, veteran Orlando TV reporter and anchor (deceased); Bill Johnson, NASA Kennedy Public Affairs (retired); Warren Leary, science writer and correspondent for the Associated Press and The New York Times (retired); Robert B. (Bob) Murray, NASA videographer and technician (retired); and Phil Sandlin, photographer for UPI and The Associated Press (retired). Brass strips engraved with each awardee’s name and affiliation were unveiled on “The Chroniclers” wall in the newsroom at the Kennedy Space Center Press Site. Sixty-six past honorees include Walter Cronkite of CBS News, Jules Bergman of ABC News and two-time Pulitzer winner John Noble Wilford of The New York Times. Today’s ceremony came on the 56th anniversary of Alan Shepard’s historic flight as America’s first human in space. Coincidentally, it was Shepard from whom the first “Chroniclers” received their award certificates in 1996. KSC Contact - Al Feinberg (321)867-2468, al.feinberg@nasa.gov

Low-pressure, high-temperature thermal bonding of polymeric microfluidic devices and their applications for electrophoretic separation

NASA Astrophysics Data System (ADS)

Sun, Yi; Chian Kwok, Yien; Nguyen, Nam-Trung

2006-08-01

A new method for thermally bonding poly(methyl methacrylate) (PMMA) substrates has been demonstrated. PMMA substrates are first engraved by CO2-laser micromachining to form microchannels. Both channel width and depth can be adjusted by varying the laser power and scanning speed. Channel depths from 50 µm to 1500 µm and widths from 150 µm to 400 µm are attained. CO2 laser is also used for drilling and dicing of the PMMA parts. Considering the thermal properties of PMMA, a novel thermal bonding process with high temperature and low bonding pressure has been developed for assembling PMMA sheets. A high bonding strength of 2.15 MPa is achieved. Subsequent inspection of the cross sections of several microdevices reveals that the dimensions of the channels are well preserved during the bonding process. Electroosmotic mobility of the ablated channel is measured to be 2.47 × 10-4 cm2 V-1 s-1. The functionality of these thermally bonded microfluidic substrates is demonstrated by performing rapid and high-resolution electrophoretic separations of mixture of fluorescein and carboxyfluorescein as well as double-stranded DNA ladders (ΦX174-Hae III dsDNA digest). The performance of the CO2 laser ablated and thermally bonded PMMA devices compares favorably with those fabricated by other professional means.

Increases in both cerebral glucose utilization and blood flow during execution of a somatosensory task.

PubMed

Ginsberg, M D; Chang, J Y; Kelley, R E; Yoshii, F; Barker, W W; Ingenito, G; Boothe, T E

1988-02-01

To investigate local metabolic and hemodynamic interrelationships during functional activation of the brain, paired studies of local cerebral glucose utilization (lCMRGlc) and blood flow (lCBF) were carried out in 10 normal subjects (9 right-handed, 1 ambidextrous) at rest and during a unilateral discriminative somatosensory/motor task--palpation and sorting of mah-jongg tiles by engraved design. The extent of activation was assessed on the basis of percentage difference images following normalization to compensate for global shifts. The somatosensory stimulus elevated lCMRGlc by 16.9 +/- 3.5% (mean +/- standard deviation) and lCBF by 26.5 +/- 5.1% in the contralateral sensorimotor cortical focus; smaller increments were noted in the homologous ipsilateral site. The increments of lCMRGlc and lCBF correlated poorly with one another in individual subjects. Stimulation of the right hand resulted in significantly higher contralateral lCMRGlc activation (19.6%) than did stimulation of the left hand (14.1%) (p less than 0.005), whereas the lCBF response was independent of the hand stimulated. Our results indicate that both glycolytic metabolism and blood flow increase locally with the execution of an active sensorimotor task and suggest that both measures may serve as reliable markers of functional activation of the normal brain.

[The Anatomy Institutions of Jean Guinter d'Andernach (1487-1574), and André Vésale (1514-1564). ].

PubMed

Drizenko, Antoine

2011-01-01

The text of the Anatomical Institutions of Johann Guinter von Andernach, in its original version, was published almost simultaneously in Paris and Basel in 1536. Guinter was then in his fiftieth year, and Andreas Vesalius who was his student in Paris between 1533 ans 1536, was only twenty-two years old. His studies being finished in Leuven and his thesis being published for the first edition in Leuven in February 1537, and for the second in Basel in March 1537, Vesalius went to Padua where he was named professor of anatomy and surgery. Vesalius, besides the reasons put forward in his dedicatory lettre to Johann Armenterianus, tried to have rapidly printed documents for his students. He published in this way in April 1538 the engraved version of the great plates which he had mostly drawn and used to support his demonstrations during sessions of dissection. For the accompanying text, he choosed the handbook of his Master Guinter von Andernach which he decided to edit incorporating modifications and which he published in Venice in 1538 by D. Bernardinus. The modifications made by Vesalius on the Guinter's text can be classified in several headings: minor adjustments, additions of anatomical comments, additions corroborating traditional physiology, and anecdotes peppering the text.

Durability of switchable QR code carriers under hydrolytic and photolytic conditions

NASA Astrophysics Data System (ADS)

Ecker, Melanie; Pretsch, Thorsten

2013-09-01

Following a guest diffusion approach, the surface of a shape memory poly(ester urethane) (PEU) was either black or blue colored. Bowtie-shaped quick response (QR) code carriers were then obtained from laser engraving and cutting, before thermo-mechanical functionalization (programming) was applied to stabilize the PEU in a thermo-responsive (switchable) state. The stability of the dye within the polymer surface and long-term functionality of the polymer were investigated against UVA and hydrolytic ageing. Spectrophotometric investigations verified UVA ageing-related color shifts from black to yellow-brownish and blue to petrol-greenish whereas hydrolytically aged samples changed from black to greenish and blue to light blue. In the case of UVA ageing, color changes were accompanied by dye decolorization, whereas hydrolytic ageing led to contrast declines due to dye diffusion. The Michelson contrast could be identified as an effective tool to follow ageing-related contrast changes between surface-dyed and laser-ablated (undyed) polymer regions. As soon as the Michelson contrast fell below a crucial value of 0.1 due to ageing, the QR code was no longer decipherable with a scanning device. Remarkably, the PEU information carrier base material could even then be adequately fixed and recovered. Hence, the surface contrast turned out to be the decisive parameter for QR code carrier applicability.

Flow analysis from PIV in engraved champagne tasting glasses: flute versus coupe

NASA Astrophysics Data System (ADS)

Beaumont, Fabien; Liger-Belair, Gérard; Polidori, Guillaume

2015-08-01

Glass shape, and especially its open aperture, is suspected to play an important role as concerns the kinetics of CO2 and flavor release during champagne tasting. In recent years, much interest has been devoted to depict each and every parameter involved in the release of gaseous CO2 from glasses poured with champagne. One cannot understand the bubbling and aromatic exhalation events in champagne tasting, however, without studying the flow-mixing mechanisms inside the glass. Indeed, a key assumption is that a causal link may exist between flow structures created in the wine due to bubble motion and the process of CO2 release and flavor exhalation. In the present work, two quite emblematic types of champagne drinking vessels are studied. The particle image velocimetry technique has been used in order to reveal the velocity field of the liquid due to the ascending bubble-driven flow for both glasses poured with champagne. The contribution of glass shape on the flow patterns and CO2 release in both glasses are discussed by the use of experimental results. The results show that the continuous flow of ascending bubbles strongly modifies the mixing and convection conditions of the surrounding liquid medium whose behavior is strongly glass shape dependent.

Evaluation of portable Raman spectroscopy and handheld X-ray fluorescence analysis (hXRF) for the direct analysis of glyptics.

PubMed

Lauwers, D; Candeias, A; Coccato, A; Mirao, J; Moens, L; Vandenabeele, P

2016-03-15

In archaeometry, the advantages of a combined use of Raman spectroscopy and X-ray fluorescence spectroscopy are extensively discussed for applications such as the analysis of paintings, manuscripts, pottery, etc. Here, we demonstrate for the first time the advantage of using both techniques for analysing glyptics. These engraved gemstones or glass materials were originally used as stamps, to identify the owner, for instance on letters, but also on wine vessels. For this research, a set of 64 glyptics (42 Roman glass specimens and 22 modern ones), belonging to the collection of the museum 'Quinta das Cruzes' in Funchal (Madeira, Portugal), was analysed with portable Raman spectroscopy and handheld X-ray fluorescence (hXRF). These techniques were also used to confirm the gemological identification of these precious objects and can give extra information about the glass composition. Raman spectroscopy identifies the molecular composition as well as on the crystalline phases present. On the other hand, hXRF results show that the antique Roman glass samples are characterised with low Pb and Sn levels and that the modern specimens can be discriminated in two groups: lead-based and non-lead-based ones. Copyright © 2015 Elsevier B.V. All rights reserved.

Fabrication of thermal-resistant gratings for high-temperature measurements using geometric phase analysis.

PubMed

Zhang, Q; Liu, Z; Xie, H; Ma, K; Wu, L

2016-12-01

Grating fabrication techniques are crucial to the success of grating-based deformation measurement methods because the quality of the grating will directly affect the measurement results. Deformation measurements at high temperatures entail heating and, perhaps, oxidize the grating. The contrast of the grating lines may change during the heating process. Thus, the thermal-resistant capability of the grating becomes a point of great concern before taking measurements. This study proposes a method that combines a laser-engraving technique with the processes of particle spraying and sintering for fabricating thermal-resistant gratings. The grating fabrication technique is introduced and discussed in detail. A numerical simulation with a geometric phase analysis (GPA) is performed for a homogeneous deformation case. Then, the selection scheme of the grating pitch is suggested. The validity of the proposed technique is verified by fabricating a thermal-resistant grating on a ZrO 2 specimen and measuring its thermal strain at high temperatures (up to 1300 °C). Images of the grating before and after deformation are used to obtain the thermal-strain field by GPA and to compare the results with well-established reference data. The experimental results indicate that this proposed technique is feasible and will offer good prospects for further applications.

Simultaneous Detection of Two Chemicals Using a TE20-Mode Substrate-Integrated Waveguide Resonator

PubMed Central

Salim, Ahmed

2018-01-01

Microwave resonators working as sensors can detect only a single analyte at a time. To address this issue, a TE20-mode substrate-integrated waveguide (SIW) resonator is exploited, owing to its two distinct regions of high-intensity electric fields, which can be manipulated by loading two chemicals. Two microfluidic channels with unequal fluid-carrying capacities, engraved in a polydimethylsiloxane (PDMS) sheet, can perturb the symmetric electric fields even if loaded with the two extreme cases of dielectric [ethanol (E), deionized water (DI)] and [deionized water, ethanol]. The four layers of the sandwiched structure considered in this study consisted of a top conductive pattern and a bottom ground, both realized on a Rogers RT/Duroid 5880. PDMS-based channels attached with an adhesive serve as the middle layers. The TE20-mode SIW with empty channels resonates at 8.26 GHz and exhibits a −25 dB return loss with an unloaded quality factor of Q ≈ 28. We simultaneously load E and DI and demonstrate the detection of the four possible combinations: [E, DI], [DI, E], [E, E], and [DI, DI]. The performance of our proposed method showed increases in sensitivity (MHz/εr) of 7.5%, 216%, and 1170% compared with three previously existing multichannel microwave chemical sensors. PMID:29518981

A 36,000-Year-Old Volcanic Eruption Depicted in the Chauvet-Pont d’Arc Cave (Ardèche, France)?

PubMed Central

Nomade, Sébastien; Genty, Dominique; Sasco, Romain; Scao, Vincent; Féruglio, Valérie; Baffier, Dominique; Guillou, Hervé; Bourdier, Camille; Valladas, Hélène; Reigner, Edouard; Debard, Evelyne; Pastre, Jean–François; Geneste, Jean-Michel

2016-01-01

Among the paintings and engravings found in the Chauvet-Pont d’Arc cave (Ardèche, France), several peculiar spray-shape signs have been previously described in the Megaloceros Gallery. Here we document the occurrence of strombolian volcanic activity located 35 km northwest of the cave, and visible from the hills above the cave entrance. The volcanic eruptions were dated, using 40Ar/39Ar, between 29 ± 10 ka and 35 ± 8 ka (2σ), which overlaps with the 14C AMS and thermoluminescence ages of the first Aurignacian occupations of the cave in the Megaloceros Gallery. Our work provides the first evidence of an intense volcanic activity between 40 and 30 ka in the Bas-Vivarais region, and it is very likely that Humans living in the Ardèche river area witnessed one or several eruptions. We propose that the spray-shape signs found in the Chauvet-Pont d’Arc cave could be the oldest known depiction of a volcanic eruption, predating by more than 34 ka the description by Pliny the Younger of the Vesuvius eruption (AD 79) and by 28 ka the Çatalhöyük mural discovered in central Turkey. PMID:26745626

A 36,000-Year-Old Volcanic Eruption Depicted in the Chauvet-Pont d'Arc Cave (Ardèche, France)?

PubMed

Nomade, Sébastien; Genty, Dominique; Sasco, Romain; Scao, Vincent; Féruglio, Valérie; Baffier, Dominique; Guillou, Hervé; Bourdier, Camille; Valladas, Hélène; Reigner, Edouard; Debard, Evelyne; Pastre, Jean-François; Geneste, Jean-Michel

2016-01-01

Among the paintings and engravings found in the Chauvet-Pont d'Arc cave (Ardèche, France), several peculiar spray-shape signs have been previously described in the Megaloceros Gallery. Here we document the occurrence of strombolian volcanic activity located 35 km northwest of the cave, and visible from the hills above the cave entrance. The volcanic eruptions were dated, using 40Ar/39Ar, between 29 ± 10 ka and 35 ± 8 ka (2σ), which overlaps with the 14C AMS and thermoluminescence ages of the first Aurignacian occupations of the cave in the Megaloceros Gallery. Our work provides the first evidence of an intense volcanic activity between 40 and 30 ka in the Bas-Vivarais region, and it is very likely that Humans living in the Ardèche river area witnessed one or several eruptions. We propose that the spray-shape signs found in the Chauvet-Pont d'Arc cave could be the oldest known depiction of a volcanic eruption, predating by more than 34 ka the description by Pliny the Younger of the Vesuvius eruption (AD 79) and by 28 ka the Çatalhöyük mural discovered in central Turkey.

Picosecond laser micromachining prior to FIB milling for electronic microscopy sample preparation

NASA Astrophysics Data System (ADS)

Sikora, Aurélien; Fares, Lahouari; Adrian, Jérôme; Goubier, Vincent; Delobbe, Anne; Corbin, Antoine; Sentis, Marc; Sarnet, Thierry

2017-10-01

In order to check the manufacturing quality of electronic components using electron microscopy, the area of interest must be exposed. This requires the removal of a large quantity of matter without damaging the surrounding area. This step can be accomplished using ion milling but the processing can last a few hours. In order to accelerate the preparation of the samples, picosecond laser micromachining prior to Focused Ion Beam polishing is envisioned. Laser ablation allows the fast removal of matter but induces damages around the ablated area. Therefore the process has to be optimized in order to limit the size of both the heat affected zone and induced dislocation zone. For this purpose, cavities have been engraved in silicon and in electronic components, using a linearly polarized picosecond laser (∼50 ps) at three different wavelengths (343, 515 and 1030 nm). Results showed that the cross sectional shapes and the surface topologies can be tuned by the laser fluence and the number of pulses. Clear cross sections of bumps and cavity openings, exposing multilayer interfaces, are demonstrated. The silicon removal rates, tuned by the applied energy density, have been measured. Removal rates achieved at 200 kHz were typically hundred times higher than those achieved by ion milling and the best efficiency was obtained at 343 nm.

Bacterial communities in pigmented biofilms formed on the sandstone bas-relief walls of the Bayon Temple, Angkor Thom, Cambodia.

PubMed

Kusumi, Asako; Li, Xianshu; Osuga, Yu; Kawashima, Arata; Gu, Ji-Dong; Nasu, Masao; Katayama, Yoko

2013-01-01

The Bayon temple in Angkor Thom, Cambodia has shown serious deterioration and is subject to the formation of various pigmented biofilms. Because biofilms are damaging the bas-reliefs, low reliefs engraved on the surface of sandstone, information about the microbial community within them is indispensable to control biofilm colonization. PCR-denaturing gradient gel electrophoresis (DGGE) analysis of biofilm samples from the pigmented sandstone surfaces showed that the bacterial community members in the biofilms differed clearly from those in the air and had low sequence similarity to database sequences. Non-destructive sampling of biofilm revealed novel bacterial groups of predominantly Rubrobacter in salmon pink biofilm, Cyanobacteria in chrome green biofilm, Cyanobacteria and Chloroflexi in signal violet biofilm, Chloroflexi in black gray biofilm, and Deinococcus-Thermus, Cyanobacteria, and Rubrobacter in blue green biofilm. Serial peeling-off of a thick biofilm by layers with adhesive sheets revealed a stratified structure: the blue-green biofilm, around which there was serious deterioration, was very rich in Cyanobacteria near the surface and Chloroflexi in deep layer below. Nitrate ion concentrations were high in the blue-green biofilm. The characteristic distribution of bacteria at different biofilm depths provides valuable information on not only the biofilm formation process but also the sandstone weathering process in the tropics.

Pleistocene cave art from Sulawesi, Indonesia.

PubMed

Aubert, M; Brumm, A; Ramli, M; Sutikna, T; Saptomo, E W; Hakim, B; Morwood, M J; van den Bergh, G D; Kinsley, L; Dosseto, A

2014-10-09

Archaeologists have long been puzzled by the appearance in Europe ∼40-35 thousand years (kyr) ago of a rich corpus of sophisticated artworks, including parietal art (that is, paintings, drawings and engravings on immobile rock surfaces) and portable art (for example, carved figurines), and the absence or scarcity of equivalent, well-dated evidence elsewhere, especially along early human migration routes in South Asia and the Far East, including Wallacea and Australia, where modern humans (Homo sapiens) were established by 50 kyr ago. Here, using uranium-series dating of coralloid speleothems directly associated with 12 human hand stencils and two figurative animal depictions from seven cave sites in the Maros karsts of Sulawesi, we show that rock art traditions on this Indonesian island are at least compatible in age with the oldest European art. The earliest dated image from Maros, with a minimum age of 39.9 kyr, is now the oldest known hand stencil in the world. In addition, a painting of a babirusa ('pig-deer') made at least 35.4 kyr ago is among the earliest dated figurative depictions worldwide, if not the earliest one. Among the implications, it can now be demonstrated that humans were producing rock art by ∼40 kyr ago at opposite ends of the Pleistocene Eurasian world.

Nd:YAG-laser-Q-switching with a photo-elastic modulator and applications

NASA Astrophysics Data System (ADS)

Bammer, F.; Petkovšek, R.; Dominguez, H.; Liedl, G.

2010-05-01

We present a rod-Nd:YAG-Laser, side-pumped with eight 50W-laser diode bars at 808nm, and Q-switched with a Single Crystal Photo-Elastic Modulator at 95.1 kHz. The latter is made of a z-cut LiNbO3-crystal, which is electrically y-excited on the mechanical resonance frequency of the x-longitudinal oscillation. With a voltage amplitude of 3 V the crystal shows a strong oscillation such that due to the photo-elastic effect a high polarization modulation is achieved, which, together with a polarizer, can be used as a simple optical switch. With this inside the laser resonator the average power is 47.8W in cw-mode and 45.5W in pulsed mode, with pulse peak powers of 4 kW and pulse widths of 100ns. This kind of operation is similar to cw-operation but offers due to the high peak powers different interaction physics with matter. The source is therefore suited for micro-welding of metals, LIDAR, rapid prototyping of plastics, marking/engraving/cutting of plastics, marking of glasses. In cases where high precision and a small heat affected zone are necessary this simple kind of pulsed operation may be advantageous, when compared to cw-operation.

Autonomous capillary microfluidic system with embedded optics for improved troponin I cardiac biomarker detection.

PubMed

Mohammed, M I; Desmulliez, M P Y

2014-11-15

Cardiovascular diseases are the most prevalent medical conditions affecting the modern world, reducing the quality of life for those affected and causing an ever increasing burden on clinical resources. Cardiac biomarkers are crucial in the diagnosis and management of patient outcomes. In that respect, such proteins are desirable to be measured at the point of care, overcoming the shortcomings of current instrumentation. We present a CO2 laser engraving technique for the rapid prototyping of a polymeric autonomous capillary system with embedded on-chip planar lenses and biosensing elements, the first step towards a fully miniaturised and integrated cardiac biosensing platform. The system has been applied to the detection of cardiac Troponin I, the gold standard biomarker for the diagnosis of acute myocardial infarction. The devised lab-on-a-chip device was demonstrated to have 24 pg/ml limit of detection, which is well within the minimum threshold for clinically applicable concentrations. Assays were completed within approximately 7-9 min. Initial results suggest that, given the portability, low power consumption and high sensitivity of the device, this technology could be developed further into point of care instrumentation useful in the diagnosis of various forms of cardiovascular diseases. Copyright © 2014 Elsevier B.V. All rights reserved.

Action-based sensory encoding in spinal sensorimotor circuits.

PubMed

Schouenborg, Jens

2008-01-01

The concept of a modular organisation of the spinal withdrawal reflex circuits has proven to be fundamental for the understanding of how the spinal cord is organised and how the sensorimotor circuits translate sensory information into adequate movement corrections. Recent studies indicate that a task-related body representation is engraved at the network level through learning-dependent mechanisms involving an active probing procedure termed 'somatosensory imprinting' during development. It was found that somatosensory imprinting depends on the tactile input that is associated with spontaneous movements that occur during sleep and results in elimination of erroneous connections and establishment of correct connections. In parallel studies it was found that the strength of the first order tactile synapses in rostrocaudally elongated zones in the adult dorsal horn in the lower lumbar cord is related to the modular organisation of the withdrawal reflexes. Hence, the topographical organisation of the tactile input to this spinal area seems to be action-based rather than a simple body map as previously thought. Far from being innate and adult like at birth, the adult organisation seems to emerge from an initial 'floating' and diffuse body representation with many inappropriate connections through profound activity-dependent rearrangements of afferent synaptic connections. It is suggested that somatosensory imprinting plays a key role in the self-organisation of the spinal cord during development.

Digital Rebirth of the Greatest Church of Cluny Maior Ecclesia: from Optronic Surveys to Real Time Use of the Digital Model

NASA Astrophysics Data System (ADS)

Landrieu, J.; Père, C.; Rollier, J.; Castandet, S.; Schotte, G.

2011-09-01

Our multidisciplinary team has virtually reconstructed the greatest church of the Romanesque period in Europe. The third church of the Abbey of Cluny (12th c.) has been destroyed after the French Revolution, leaving only 8% of the building standing. Many documents have been studied, to include the latest archaeological knowledge in the virtual model. Most remains have been scanned for CAD restitution. The mock-up of the church needed 1600 different numerical files, including the scanned pieces and the anastylosis of a Romanesque portal, a Gothic façade and a mosaic pavement. We faced various difficulties to assemble the different elements of the huge building, and to include the digitized parts. Our workflow consisted in generating geometrical shapes of the church, enriched with metadata such as texture, material... The whole mock up was finally exported to dedicated software to run the rendering step. Our work consisted in creating a whole database of 3D models as well as 2D sources (plans, engravings, pictures...) accessible by the scientific community. The scientific perspectives focus on a representation in virtual immersion of the grand church at scale 1 and an access to the digital mock-up through Augmented Reality.

Biology of Scolytus piceae (Coleoptera: Curculionidae: Scolytinae) in Northern Idaho and Notes on Comparative Anatomical Features of the Larva.

PubMed

Furniss, Malcolm M; Kegley, Sandra J

2017-06-01

The forests of the northern Rocky Mountains are hosts of nine species of Nearctic conifer-infesting bark beetles of the genus Scolytus Geoffroy. One of these, Scolytus piceae Swaine (Coleoptera: Curculionidae), infests spruces across the continent including Picea engelmannii Parry (Pinaceae) in Idaho. Mature larvae overwintered before transforming to adults, which infested new hosts in early June. Scolytus piceae most commonly infested shaded out lower branches of mature live spruce. In sporadic wind-felled spruce, the beetle infested the terminal portion of branches throughout the crown, whereas another Scolytinae, Polygraphus rufipennis (Kirby), infested the thicker bark basal portion of the same branches. This niche separation resulted from difference in time of their dispersal flight and ability of S. piceae to colonize thin bark by engraving the underlying sapwood. Population recruitment of S. piceae was low in shaded out lower branches, in balance with this limited host resource. Features of the head of S. piceae larvae differed from that reported in literature, including the mandible dentition, antennal field, and pattern of setae on the postlabium. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Increasing behavioral flexibility? New archaeological and ecological approaches to understanding the Howieson's Poort in Southern Africa

NASA Astrophysics Data System (ADS)

Kandel, A. W.; Bolus, M.; Bruch, A. A.; Haidle, M. N.; Hertler, C.; Märker, M.

2012-04-01

The Howieson's Poort (HP) of Southern Africa peaked between 60 and 65 ka and represents a distinct phase of cultural innovation adopted by modern humans during the Middle Stone Age. While researchers generally attribute the rise and fall of the HP to social and environmental causes, neither provides a complete explanation. As patterns at the site level come into focus, large-scale trends explaining the HP expansion remain uncertain. Comparisons with earlier and later cultural phases may provide ways to view the HP phenomenon. The most notable artifacts of the HP lithic industry are standardized, crescent-shaped, backed stone tools called segments that were mounted on wooden shafts in several orientations using mixtures of ground pigment and plant resin to create composite tools such as stone-tipped arrows and spears. The use of ocher, often faceted or striated from grinding and sometimes engraved with geometric patterns, attests to functional and possibly symbolic behavior. Other attributes of the HP include the use of laminar lithic technology to produce blades and a preference for finer grained raw materials. While rare bone tools hint at advanced hunting strategies, other organic finds include geometrically engraved and perforated ostrich eggshell containers and perhaps shell beads, artifacts that serve as markers conveying individual and group status. Analyses of faunal remains supports the possible use of snares and traps, in addition to diverse hunting strategies. Even the sediments testify to changes in behavior that involved the increasing maintenance of living areas. Micromorphological evidence for the construction of bedding layers that were regularly cleaned by burning appears towards the end of the HP. While this combination of behaviors indicates a cultural complexity that did not exist before or after the HP, the reasons for its appearance and the causes of its demise remain unclear. To test the hypotheses of cultural and environmental causality and examine potential routes of expansion, the research center "The Role of Culture in Early Expansions of Humans" (ROCEEH) devised new ways to view diachronic datasets from Southern Africa. The research team queried the ROCEEH Out-of-Africa Database for known HP sites and compared these data with the periods directly before and after. By employing techniques from several scientific disciplines to help explain these issues, we developed a diversity index to assess variability in tool types; assessed transport distances of raw materials to examine patterns of movement across the landscape; reviewed the complexity of the cognition necessary to manufacture simple, composite and complementary tools; applied stochastic models such as boosted regression trees and statistical mechanics to explain the geographic distribution of sites in relation to specific combinations of environmental factors; and reconstructed classes of biomes and climatic constraints associated with the HP. These varied techniques allowed the ROCEEH team to integrate and process information with the surprising result that we observed little diachronic change. These results concurs with new reports and help us examine changes in the behavioral flexibility of the inhabitants of Southern Africa during the HP.

An earthworm-like robot using origami-ball structures

NASA Astrophysics Data System (ADS)

Fang, Hongbin; Zhang, Yetong; Wang, K. W.

2017-04-01

Earthworms possess extraordinary on-ground and underground mobility, which inspired researchers to mimic their morphology characteristics and locomotion mechanisms to develop crawling robots. One of the bottlenecks that constrain the development and wide-spread application of earthworm-like robots is the process of design, fabrication and assembly of the robot frameworks. Here we present a new earthworm-like robot design and prototype by exploring and utilizing origami ball structures. The origami ball is able to antagonistically output both axial and radial deformations, similar as an earthworm's body segment. The origami folding techniques also introduce many advantages to the robot development, including precise and low cost fabrication and high customizability. Starting from a flat polymer film, we adopt laser machining technique to engrave the crease pattern and manually fold the patterned flat film into an origami ball. Coupling the ball with a servomotor-driven linkage yields a robot segment. Connecting six segments in series, we obtain an earthworm-like origami robot prototype. The prototype is tested in a tube to evaluate its locomotion performance. It shows that the robot could crawl effectively in the tube, manifesting the feasibility of the origami-based design. In addition, test results indicate that the robot's locomotion could be tailored by employing different peristalsis-wave based gaits. The robot design and prototype reported in this paper could foster a new breed of crawling robots with simply design, fabrication, and assemble processes, and improved locomotion performance.

Getting started with open-hardware: development and control of microfluidic devices.

PubMed

da Costa, Eric Tavares; Mora, Maria F; Willis, Peter A; do Lago, Claudimir L; Jiao, Hong; Garcia, Carlos D

2014-08-01

Understanding basic concepts of electronics and computer programming allows researchers to get the most out of the equipment found in their laboratories. Although a number of platforms have been specifically designed for the general public and are supported by a vast array of on-line tutorials, this subject is not normally included in university chemistry curricula. Aiming to provide the basic concepts of hardware and software, this article is focused on the design and use of a simple module to control a series of PDMS-based valves. The module is based on a low-cost microprocessor (Teensy) and open-source software (Arduino). The microvalves were fabricated using thin sheets of PDMS and patterned using CO2 laser engraving, providing a simple and efficient way to fabricate devices without the traditional photolithographic process or facilities. Synchronization of valve control enabled the development of two simple devices to perform injection (1.6 ± 0.4 μL/stroke) and mixing of different solutions. Furthermore, a practical demonstration of the utility of this system for microscale chemical sample handling and analysis was achieved performing an on-chip acid-base titration, followed by conductivity detection with an open-source low-cost detection system. Overall, the system provided a very reproducible (98%) platform to perform fluid delivery at the microfluidic scale. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Alcohol and the young child.

PubMed

Bradford, D E

1984-01-01

With the increasing availability of alcohol in modern times, the child neglect and abuse portrayed in Hogarth's engraving Gin Lane may once again be witnessed. Reports occur occasionally of alcohol being given deliberately to infants to quieten them, but alcohol poisoning in the slightly older child is not uncommon. The introduction of child-proof containers has altered poisoning figures recently. However, alcohol poisoning tends to occur at ages 3 and 4, that is, about 2 years after the peak of all poisonings in children. This difference may be an indication that alcohol is taken in imitation of parents' drinking, a suggestion which has some support from reported cases of mouthwash poisoning. Holidays and high days where children and alcohol mix, are potentially dangerous periods. Since alcohol poisoning can be fatal, yet if recognised is relatively easily managed, every child with the slightest degree of drowsiness should be suspect until proven or not by blood alcohol. The prevention of alcohol poisoning in the young child consists in protecting the alcohol by lock and key, not setting an example by drinking or gargling in front of children. Many substances such as mouthwash and perfume should also be under supervision. Once actual poisoning has occurred blood sugar is probably more important than the level of blood ethanol and blood sugar levels should be monitored frequently and the child treated with glucose, preferably intravenously.

Banknotes and unattended cash transactions

NASA Astrophysics Data System (ADS)

Bernardini, Ronald R.

2000-04-01

There is a 64 billion dollar annual unattended cash transaction business in the US with 10 to 20 million daily transactions. Even small problems with the machine readability of banknotes can quickly become a major problem to the machine manufacturer and consumer. Traditional note designs incorporate overt security features for visual validation by the public. Many of these features such as fine line engraving, microprinting and watermarks are unsuitable as machine readable features in low cost note acceptors. Current machine readable features, mostly covert, were designed and implemented with the central banks in mind. These features are only usable by the banks large, high speed currency sorting and validation equipment. New note designs should consider and provide for low cost not acceptors, implementing features developed for inexpensive sensing technologies. Machine readable features are only as good as their consistency. Quality of security features as well as that of the overall printing process must be maintained to ensure reliable and secure operation of note readers. Variations in printing and of the components used to make the note are one of the major causes of poor performance in low cost note acceptors. The involvement of machine manufacturers in new currency designs will aid note producers in the design of a note that is machine friendly, helping to secure the acceptance of the note by the public as well as acting asa deterrent to fraud.

Roll-to-Roll Nanoforming of Metals Using Laser-Induced Superplasticity.

PubMed

Goswami, Debkalpa; Munera, Juan C; Pal, Aniket; Sadri, Behnam; Scarpetti, Caio Lui P G; Martinez, Ramses V

2018-05-24

This Letter describes a low-cost, scalable nanomanufacturing process that enables the continuous forming of thin metallic layers with nanoscale accuracy using roll-to-roll, laser-induced superplasticity (R2RLIS). R2RLIS uses a laser shock to induce the ultrahigh-strain-rate deformation of metallic films at room temperature into low-cost polymeric nanomolds, independently of the original grain size of the metal. This simple and inexpensive nanoforming method does not require access to cleanrooms and associated facilities, and can be easily implemented on conventional CO 2 lasers, enabling laser systems commonly used for rapid prototyping or industrial cutting and engraving to fabricate uniform and three-dimensional crystalline metallic nanostructures over large areas. Tuning the laser power during the R2RLIS process enables the control of the aspect ratio and the mechanical and optical properties of the fabricated nanostructures. This roll-to-roll technique successfully fabricates mechanically strengthened gold plasmonic nanostructures with aspect ratios as high as 5 that exhibit high oxidation resistance and strong optical field enhancements. The CO 2 laser used in R2RLIS can also integrate the fabricated nanostructures on transparent flexible substrates with robust interfacial contact. The ability to fabricate ultrasmooth metallic nanostructures using roll-to-roll manufacturing enables the large scale production, at a relatively low-cost, of flexible plasmonic devices toward emerging applications.

Redesigning U.S. currency

NASA Astrophysics Data System (ADS)

Ferguson, Thomas A.; Church, Sara E.

1996-03-01

The first new design of United States currency in over 60 years will soon be issued. Its issuance will be the culmination of a 6-year effort to make U.S. currency more secure against widely available advanced reprographic technology. The cooperative effort was directed by the Advanced Counterfeit Deterrence (ACD) Steering Committee, with executive representatives from the Federal Reserve System (FRS), U.S. Secret Service (USSS), Bureau of Engraving and Printing (BEP) and Treasury Department. A task force of technical experts from each agency carried out the necessary evaluations. The overall strategy to determine the new design and new features applied a comprehensive, synergistic approach to target each type of currency user and each type of counterfeiting. To maximize objectivity yet expedite final selection, deterrent and detection technologies were evaluated through several parallel channels. These efforts included an open request for feature samples through the Commerce Business Daily, in-house testing of each feature, independent evaluation by the National Research Council, in-house design development and survey of world currencies. Recommendations were submitted by the Steering Committee to the Treasury Secretary for concept approval, announced in July 1994. Beginning in 1996, new designs will be issued by denomination approximately one per year, starting with the $100 bill. Future new design efforts will include input from the recently founded Securities Technology Institute (STI) at Johns Hopkins Applied Physics Laboratory. Input will include evaluation of existing features, development of new techniques and adversarial analysis.

Sex difference in human fingertip recognition of micron-level randomness as unpleasant.

PubMed

Nakatani, M; Kawasoe, T; Denda, M

2011-08-01

We investigated sex difference in evaluation, using the human fingertip, of the tactile impressions of three different micron-scale patterns laser-engraved on plastic plates. There were two ordered (periodical) patterns consisting of ripples on a scale of a few micrometres and one pseudo-random (non-periodical) pattern; these patterns were considered to mimic the surface geometry of healthy and damaged human hair, respectively. In the first experiment, 10 women and 10 men ran a fingertip over each surface and determined which of the three plates felt most unpleasant. All 10 female participants reported the random pattern, but not the ordered patterns, as unpleasant, whereas the majority of the male participants did not. In the second experiment, 9 of 10 female participants continued to report the pseudo-random pattern as unpleasant even after their fingertip had been coated with a collodion membrane. In the third experiment, participants were asked to evaluate the magnitude of the tactile impression for each pattern. The results again indicated that female participants tend to report a greater magnitude of unpleasantness than male participants. Our findings indicate that the female participants could readily detect microgeometric surface characteristics and that they evaluated the random pattern as more unpleasant. Possible physical and perceptual mechanisms involved are discussed. © 2011 The Authors. ICS © 2011 Society of Cosmetic Scientists and the Société Française de Cosmétologie.

[The "Anatomic Charts" (1722) of Johann Adam Kulmus (1689-1745). A textbook for (wound)physician education in the German language countries and in Japan].

PubMed

Sachs, Michael

2002-01-01

Although we can not find new disclosures or new ways of describing anatomical structures in the "Anatomischen Tabellen", a text-book written by Johann Adam Kulmus (1689-1745), it has had it's influence in the development of medicine, not only in Germany but in Japan. The "Anatomischen Tabellen" has been one of the most published anatomical text-books of the 18th century. This book was concepted by the medical doctor Kulmus, who was born in the German town Breslau and who was living in Danzig, especially to educate the apprentices and fellows of surgeons in German language. Therefore the book was equiped with several copper-plates for illustration. During the years from 1722 to 1814 23 different editions were found, from those were 14 in German, 5 in Latin and one each in French and Netherland. Not one other anatomical textbooks of the 18th century has had such an abundance of editions. The disadvantage of the former used oversized anatomical atlases was their being published in latin and therefore they have been without any use and much too expensive for educational purposes for young surgeons. The "Anatomischen Tabellen" has been the first occidental text-book of anatomy to be translated into japanese to be published in 1774, supplied with numerous wooden engravings.

Sliding Rocks on Racetrack Playa, Death Valley National Park: First Observation of Rocks in Motion

PubMed Central

Lorenz, Ralph D.; Ray, Jib; Jackson, Brian

2014-01-01

The engraved trails of rocks on the nearly flat, dry mud surface of Racetrack Playa, Death Valley National Park, have excited speculation about the movement mechanism since the 1940s. Rock movement has been variously attributed to high winds, liquid water, ice, or ice flotation, but has not been previously observed in action. We recorded the first direct scientific observation of rock movements using GPS-instrumented rocks and photography, in conjunction with a weather station and time-lapse cameras. The largest observed rock movement involved >60 rocks on December 20, 2013 and some instrumented rocks moved up to 224 m between December 2013 and January 2014 in multiple move events. In contrast with previous hypotheses of powerful winds or thick ice floating rocks off the playa surface, the process of rock movement that we have observed occurs when the thin, 3 to 6 mm, “windowpane” ice sheet covering the playa pool begins to melt in late morning sun and breaks up under light winds of ∼4–5 m/s. Floating ice panels 10 s of meters in size push multiple rocks at low speeds of 2–5 m/min. along trajectories determined by the direction and velocity of the wind as well as that of the water flowing under the ice. PMID:25162535

Increase of hole-drilling speed by using packs of laser pulses

NASA Astrophysics Data System (ADS)

Gorny, Sergey G.; Grigoriev, A. M.; Lopota, Vitaliy A.; Turichin, Gleb A.

1999-09-01

For realization of the optimum mode of hole drilling the packs of laser pulses of high intensity were used, when average level of intensity of radiation is not too high, that reduces specific energy of destruction, and the peak intensity is reasonably great, that the pulse of pressure of effect at evaporation has completely deleted the liquid from the zone of processing. The high peak intensity of radiation permits in this case to place a target not in focus of a optical system, creating on its surface the image with the help of masks. It permits to receive in metal plates the holes of any section, to execute marking of surfaces and deep engraving of sample material with the help of laser. With the using of focused radiation the cutting of thin materials can be executed without a auxiliary gas. The condition of melt replacement is excess of power of recoil pressure above the power of viscous forces and forces of inertia. The decision of the hydrodynamic problem permits to evaluate the necessary parameters of laser radiation, frequency and longitude of packs of pulses which provide increases of process speed in several times. The conducted experiments confirm the indicated theoretical analysis of process of removing of the material under action of packs of pulses of laser radiation. The given process is realized in laser technological installations for holes drilling and marks of materials.

Rock art at the pleistocene/holocene boundary in Eastern South America.

PubMed

Neves, Walter A; Araujo, Astolfo G M; Bernardo, Danilo V; Kipnis, Renato; Feathers, James K

2012-01-01

Most investigations regarding the first americans have primarily focused on four themes: when the New World was settled by humans; where they came from; how many migrations or colonization pulses from elsewhere were involved in the process; and what kinds of subsistence patterns and material culture they developed during the first millennia of colonization. Little is known, however, about the symbolic world of the first humans who settled the New World, because artistic manifestations either as rock-art, ornaments, and portable art objects dated to the Pleistocene/Holocene transition are exceedingly rare in the Americas. Here we report a pecked anthropomorphic figure engraved in the bedrock of Lapa do Santo, an archaeological site located in Central Brazil. The horizontal projection of the radiocarbon ages obtained at the north profile suggests a minimum age of 9,370 ± 40 BP, (cal BP 10,700 to 10,500) for the petroglyph that is further supported by optically stimulated luminescence (OSL) dates from sediment in the same stratigraphic unit, located between two ages from 11.7 ± 0.8 ka BP to 9.9 ± 0.7 ka BP. These data allow us to suggest that the anthropomorphic figure is the oldest reliably dated figurative petroglyph ever found in the New World, indicating that cultural variability during the Pleistocene/Holocene boundary in South America was not restricted to stone tools and subsistence, but also encompassed the symbolic dimension.

The evolution of the Faculty of Language from a Chomskyan perspective: bridging linguistics and biology.

PubMed

Longa, Victor Manuel

2013-01-01

While language was traditionally considered a purely cultural trait, the advent of Noam Chomsky's Generative Grammar in the second half of the twentieth century dramatically challenged that view. According to that theory, language is an innate feature, part of the human biological endowment. If language is indeed innate, it had to biologically evolve. This review has two main objectives: firstly, it characterizes from a Chomskyan perspective the evolutionary processes by which language could have come into being. Secondly, it proposes a new method for interpreting the archaeological record that radically differs from the usual types of evidence Paleoanthropology has concentrated on when dealing with language evolution: while archaeological remains have usually been regarded from the view of the behavior they could be associated with, the paper will consider archaeological remains from the view of the computational processes and capabilities at work for their production. This computational approach, illustrated with a computational analysis of prehistoric geometric engravings, will be used to challenge the usual generative thinking on language evolution, based on the high specificity of language. The paper argues that the biological machinery of language is neither specifically linguistic nor specifically human, although language itself can still be considered a species-specific innate trait. From such a view, language would be one of the consequences of a slight modification operated on an ancestral architecture shared with vertebrates.

Male genital representation in paleolithic art: erection and circumcision before history.

PubMed

Angulo, Javier C; García-Díez, Marcos

2009-07-01

To report on the likely existing evidence about the practice of circumcision in prehistory, or at least a culture of foreskin retraction, and also the meaning of erection in Paleolithic minds. The origin of the ritual of circumcision has been lost in time. Similarly, the primitive anthropologic meaning of erection is undefined. We studied the archeologic and artistic evidence regarding human representations performed during the Upper Paleolithic period, 38,000 to 11,000 years BCE, in Europe, with a focus on genital male representations in portable and rock art. Drawings, engravings, and sculptures displaying humans are relatively scarce, and <100 examples of male genitals are specifically represented. Some depict a circumcised penis and other represent urologic disorders such as phimosis, paraphimosis, discharge, priapism, or a scrotal mass. In addition, a small number of phalluses carved in horn, bone, or stone, with varying morphology, has survived to the present and also reveals a sustained cult for male erection and foreskin retraction not limited to a particular topographical territory. The very few noncoital human or humanoid figures with marked erection appear in a context of serious danger or death. Therefore, erection could be understood as a phenomenon related to the shamanic transit between life and death. The erection in Paleolithic art is explicitly represented in almost all the figures defined as unequivocally male that have survived to the present and in many objects of portable art. Circumcision and/or foreskin retraction of the penis are present in most of the works.

The nitrous oxide "dream" of Cora Gray: a dental anesthesia story of 1884.

PubMed

Christen, Arden G; Christen, Joan A

2014-01-01

In the September 1884 issue of Frank Leslie's Popular Monthly magazine, a fictional dramatic short story was published concerning the dental use of nitrous oxide. Entitled, "Cora Gray," it was written by the well-known American journalist and poet John Whittaker Watson (1815-1848), who authored hundreds of sentimental, tragic and dramatic poems, serials and stories concerning the destitute lives and deaths of downtrodden young women of that time. His greatest poetic effort, "Beautiful Snow," (1869) tells of a young prostitute who freezes to death in a snow bank. Watson, born in New York City, was educated at the University of New York, where he studied medicine. He also developed and used his skills as an engraver, journalist and writer. Watson obviously based his imaginative narrative on his medical knowledge of nitrous oxide and its physical and psychological side effects when inhaled. The story centers around the dreamlike romantic experiences of a 19-year-old female dental patient while she is under the effects of this gas. It explicitly depicts the administration of nitrous oxide and the resulting erotic visions and hallucinations that the young patient experiences. We make reference to other cautionary scientific writings from the late 1800s, in order to point out and clarify the potentially negative repercussions of nitrous oxide when administered to female dental patients without the presence of a third party. The ethics and propriety of anesthesia administration remain as perennial questions in dentistry to this day.

Effect Of Laser CO{sub 2} Parameters In Marking Of Glass

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khanafi-Benghalem, Nafissa; Boudoukha, Hassina; Benghalem, Kamel

Currently many techniques of marking are exploited in a great number of sectors, on various materials (cardboard, textile, wood, leather, plastic, metal, ceramics and glass). The printing is done on supports of great or small dimension for all geometrical forms (plane, round, conical and ovalised). We can print colour as much than we wish. The marking technology for the identification of the glass parts knows a remarkable development carried by the new needs for the industrialists using transparent materials such as the optical, chemical, pharmaceutical sectors, the luxury and drink industries or publicity and decoration (neon signs, advertising mirrors). Themore » objective of our work consists particularly in engraving on glass the measurement scales forming a whole of ordered graduation which the goal is to carry out reading systems of measuring apparatus about 1/10 {mu}m of precision. We used as tool for marking the laser CO{sub 2}. Our choice is justified by the flexibility of the laser, the permanent lifespan of the graduations carried out and the guarantee of the facility of reading incidentally the precision and the accuracy of the measuring apparatus. The study parameters of the laser beam are the velocity (400, 600, 800, 1000 m/s.), the power (25, 75 and 80% of 25W) and the numbers pass (one, two and three pass). The optical observations results obtained suggest that the highest and the average power used remain the favourable parameters for the quality of the graduations carried out.« less

Development of a Flexible Non-Metal Electrode for Cell Stimulation and Recording

PubMed Central

Gong, Cihun-Siyong Alex; Syu, Wun-Jia; Lei, Kin Fong; Hwang, Yih-Shiou

2016-01-01

This study presents a method of producing flexible electrodes for potentially simultaneously stimulating and measuring cellular signals in retinal cells. Currently, most multi-electrode applications rely primarily on etching, but the metals involved have a certain degree of brittleness, leaving them prone to cracking under prolonged pressure. This study proposes using silver chloride ink as a conductive metal, and polydimethysiloxane (PDMS) as the substrate to provide electrodes with an increased degree of flexibility to allow them to bend. This structure is divided into the electrode layer made of PDMS and silver chloride ink, and a PDMS film coating layer. PDMS can be mixed in different proportions to modify the degree of rigidity. The proposed method involved three steps. The first segment entailed the manufacturing of the electrode, using silver chloride ink as the conductive material, and using computer software to define the electrode size and micro-engraving mechanisms to produce the electrode pattern. The resulting uniform PDMS pattern was then baked onto the model, and the flow channel was filled with the conductive material before air drying to produce the required electrode. In the second stage, we tested the electrode, using an impedance analyzer to measure electrode cyclic voltammetry and impedance. In the third phase, mechanical and biocompatibility tests were conducted to determine electrode properties. This study aims to produce a flexible, non-metallic sensing electrode which fits snugly for use in a range of measurement applications. PMID:27690049

Effect Of Laser CO2 Parameters In Marking Of Glass

NASA Astrophysics Data System (ADS)

Khanafi-Benghalem, Nafissa; Benghalem, Kamel; Boudoukha, Hassina

2008-09-01

Currently many techniques of marking are exploited in a great number of sectors, on various materials (cardboard, textile, wood, leather, plastic, metal, ceramics and glass). The printing is done on supports of great or small dimension for all geometrical forms (plane, round, conical and ovalised). We can print colour as much than we wish. The marking technology for the identification of the glass parts knows a remarkable development carried by the new needs for the industrialists using transparent materials such as the optical, chemical, pharmaceutical sectors, the luxury and drink industries or publicity and decoration (neon signs, advertising mirrors). The objective of our work consists particularly in engraving on glass the measurement scales forming a whole of ordered graduation which the goal is to carry out reading systems of measuring apparatus about 1/10 μm of precision. We used as tool for marking the laser CO2. Our choice is justified by the flexibility of the laser, the permanent lifespan of the graduations carried out and the guarantee of the facility of reading incidentally the precision and the accuracy of the measuring apparatus. The study parameters of the laser beam are the velocity (400, 600, 800, 1000 m/s.), the power (25, 75 and 80% of 25W) and the numbers pass (one, two and three pass). The optical observations results obtained suggest that the highest and the average power used remain the favourable parameters for the quality of the graduations carried out.

Visualization of permanent marks in progressive addition lenses by digital in-line holography

NASA Astrophysics Data System (ADS)

Perucho, Beatriz; Micó, Vicente

2013-04-01

A critical issue in the production of ophthalmic lenses is to guarantee the correct centering and alignment throughout the manufacturing and mounting processes. Aimed to that, progressive addition lenses (PALs) incorporate permanent marks at standardized locations at the lens. Those marks are engraved upon the surface and provide the model identification and addition power of the PAL, as well as to serve as locator marks to re-ink the removable marks again if necessary. Although the permanent marks should be visible by simple visual inspection, those marks are often faint and weak on new lenses providing low contrast, obscured by scratches on older lenses, and partially occluded and difficult to recognize on tinted or anti-reflection coated lenses. In this contribution, we present an extremely simple visualization system for permanent marks in PALs based on digital in-line holography. Light emitted by a superluminescent diode (SLD) is used to illuminate the PAL which is placed just before a digital (CCD) sensor. Thus, the CCD records an in-line hologram incoming from the diffracted wavefront provided by the PAL. As a result, it is possible to recover an in-focus image of the PAL inspected region by means of classical holographic tools applied in the digital domain. This numerical process involves digital recording of the in-line hologram, numerical back propagation to the PAL plane, and some digital processing to reduce noise and present a high quality final image. Preliminary experimental results are provided showing the applicability of the proposed method.

Boring in response to bark and phloem extracts from North American trees does not explain host acceptance behavior of Orthotomicus erosus (Coleoptera: Scolytidae).

PubMed

Walter, Abigail J; Kells, Stephen A; Venette, Robert C; Seybold, Steven J

2010-04-01

When invasive herbivorous insects encounter novel plant species, they must determine whether the novel plants are hosts. The Mediterranean pine engraver, Orthotomicus erosus (Wollaston), an exotic bark beetle poised to expand its range in North America, accepts hosts after contacting the bark. To test the hypothesis that O. erosus accepts hosts on the basis of gustatory cues, we prepared bark and phloem extracts from logs of four North American tree species that we had used in previous host acceptance experiments. Water, methanol, and hexane extracts of red pine, tamarack, balsam fir, and paper birch were presented alone and in combination on a neutral filter paper substrate in a section of a plastic drinking straw. Boring behavior in response to the three-extract combinations differed from the pattern of acceptance previously observed among species when the beetles were in contact with the bark surface. Only the aqueous extracts of tamarack, Larix laricina, increased the initiation and the extent of boring by O. erosus on the filter paper substrate. We conclude that the effects of extracted chemicals do not match the behavior of the beetles observed when penetrating excised bark and phloem discs, indicating that host selection by O. erosus may not be predictable from bark and phloem chemistry alone. Instead, host acceptance may be determined by nongustatory stimuli or by a combination of stimuli including gustatory and nongustatory cues.

Additional evidence on the use of personal ornaments in the Middle Paleolithic of North Africa

PubMed Central

d'Errico, Francesco; Vanhaeren, Marian; Barton, Nick; Bouzouggar, Abdeljalil; Mienis, Henk; Richter, Daniel; Hublin, Jean-Jacques; McPherron, Shannon P.; Lozouet, Pierre

2009-01-01

Recent investigations into the origins of symbolism indicate that personal ornaments in the form of perforated marine shell beads were used in the Near East, North Africa, and SubSaharan Africa at least 35 ka earlier than any personal ornaments in Europe. Together with instances of pigment use, engravings, and formal bone tools, personal ornaments are used to support an early emergence of behavioral modernity in Africa, associated with the origin of our species and significantly predating the timing for its dispersal out of Africa. Criticisms have been leveled at the low numbers of recovered shells, the lack of secure dating evidence, and the fact that documented examples were not deliberately shaped. In this paper, we report on 25 additional shell beads from four Moroccan Middle Paleolithic sites. We review their stratigraphic and chronological contexts and address the issue of these shells having been deliberately modified and used. We detail the results of comparative analyses of modern, fossil, and archaeological assemblages and microscopic examinations of the Moroccan material. We conclude that Nassarius shells were consistently used for personal ornamentation in this region at the end of the last interglacial. Absence of ornaments at Middle Paleolithic sites postdating Marine Isotope Stage 5 raises the question of the possible role of climatic changes in the disappearance of this hallmark of symbolic behavior before its reinvention 40 ka ago. Our results suggest that further inquiry is necessary into the mechanisms of cultural transmission within early Homo sapiens populations. PMID:19717433

High-power picosecond laser with 400W average power for large scale applications

NASA Astrophysics Data System (ADS)

Du, Keming; Brüning, Stephan; Gillner, Arnold

2012-03-01

Laser processing is generally known for low thermal influence, precise energy processing and the possibility to ablate every type of material independent on hardness and vaporisation temperature. The use of ultra-short pulsed lasers offers new possibilities in the manufacturing of high end products with extra high processing qualities. For achieving a sufficient and economical processing speed, high average power is needed. To scale the power for industrial uses the picosecond laser system has been developed, which consists of a seeder, a preamplifier and an end amplifier. With the oscillator/amplifier system more than 400W average power and maximum pulse energy 1mJ was obtained. For study of high speed processing of large embossing metal roller two different ps laser systems have been integrated into a cylinder engraving machine. One of the ps lasers has an average power of 80W while the other has 300W. With this high power ps laser fluencies of up to 30 J/cm2 at pulse repetition rates in the multi MHz range have been achieved. Different materials (Cu, Ni, Al, steel) have been explored for parameters like ablation rate per pulse, ablation geometry, surface roughness, influence of pulse overlap and number of loops. An enhanced ablation quality and an effective ablation rate of 4mm3/min have been achieved by using different scanning systems and an optimized processing strategy. The max. achieved volume rate is 20mm3/min.

The Stephen H. Long Expedition (1819?1820), Titian R. Peale?s field illustrations, and the lost holotypes of the North American shrews Sorex brevicaudus Say and Sorex parvus Say (Mammalia: Soricidae) from the Philadelphia Museum

USGS Publications Warehouse

Woodman, N.

2009-01-01

While encamped for the winter of 1819?1820 at Engineer Cantonment along the Missouri River in present-day eastern Nebraska, members of Major Stephen Harriman Long?s Expedition to the Rocky Mountains collected a number of animals that were previously unknown. Among the mammals were two soricids that were subsequently described by Thomas Say as Sorex brevicaudus (Northern Short-tailed Shrew, Blarina brevicauda) and Sorex parvus (Least Shrew, Cryptotis parvus). The holotypes of these species were deposited and placed on public exhibit in the Philadelphia Museum, the predominant North American systematic collection of the early nineteenth century. Like most private museums of that era, the Philadelphia Museum eventually went out of business, and its collections were dispersed and, for the most part, lost. Fortunately, Titian R. Peale made a detailed field sketch of the two specimens soon after their capture and subsequently executed a watercolor based on that sketch. In addition, an engraving of the holotypes was published in the decade following the discovery of the two species. Illustrations of holotypes are taxonomically useful when they depict diagnostic characters of species. They take on added taxonomic significance in the absence of the holotypes. In the cases of Sorex brevicaudus and Sorex parvus, pictures provide strong confirmation of the taxonomic identities of these two species, as well as recording the early history of the specimens.

Odor-induced recall of emotional memories in PTSD-Review and new paradigm for research.

PubMed

Daniels, Judith K; Vermetten, Eric

2016-10-01

It is clinically well known that olfactory intrusions in PTSD can be a disabling phenomena due to the involuntary recall of odor memories. Odorants can trigger involuntary recall of emotional memories as well have the potential to help diminishing emotional arousal as grounding stimuli. Despite major advances in our understanding of the function of olfactory system, the study of the relation of olfaction and emotional memory is still relatively scarce. Odor memory is long thought to be different than other types of memories such as verbal or visual memories, being more strongly engraved and more closely related to strong emotions. Brain areas mediating smell memory including orbitofrontal cortex and other parts of medial prefrontal cortex, hippocampus and amygdala, have been implicated in learning and memory and are part of a neural circuitry that is involved in PTSD. The olfactory cortex itself also plays an important role in emotional processing. Clinical observations support the notion that odor-evoked memories can play a role in the symptomatology of PTSD. This paper reviews a re-emerging body of science linking odor processing to emotional processing in PTSD using the calming and grounding effect of odors as well as the use of odors in augmented exposure therapy. This results in converging evidence that olfaction is an excellent model for studying many questions germane to the field of human emotional memory processing. Copyright © 2016 Elsevier Inc. All rights reserved.

PEG-PLA-PEG block copolymeric nanoparticles for oral immunization against hepatitis B.

PubMed

Jain, Arvind K; Goyal, Amit K; Mishra, Neeraj; Vaidya, Bhuvaneshwar; Mangal, Sharad; Vyas, Suresh P

2010-03-15

PLA/PLGA nanoparticles are well known as efficient vaccine delivery systems, but they have got limitation in oral vaccine delivery because of their sensitivity to harsh gastric environment. The aim of present study was to improve the stability of PLA nanoparticles in such environment by copolymerizing PLA with PEG. Nanoparticles were formulated using different block copolymers AB, ABA and BAB (where 'A' is PLA and 'B' is PEG) encapsulating hepatitis B surface antigen (HBsAg) to evaluate their efficacy as oral vaccine delivery system. The results of in vitro studies engrave the efficiency of copolymeric nanoparticles to retain encapsulated antigen and average particle size even after 2 h incubation in simulated gastric fluid and simulated intestinal fluid. Fluorescence microscopic studies indicated efficient uptake of copolymeric nanoparticles by gut mucosa of immunized mice model as compared to control. Finally copolymeric and PLA nanoparticles, encapsulating HBsAg, were evaluated for their adjuvancity in generating immune response after oral administration. PLA nanoparticles could not generate an effective immune response due to stability issues. On the other hand, oral administration of copolymeric nanoparticles exhibited effective levels of humoral immunity along with the mucosal (sIgA) and cellular immune response (T(H)1). The results of in vitro and in vivo studies demonstrate that BAB nanoparticles depict enhanced mucosal uptake leading to effective immune response as compared to other copolymeric nanoparticles. Present study indicates the efficacy of BAB nanoparticles as a promising carrier for oral immunization. 2009 Elsevier B.V. All rights reserved.

Exploiting an automated microfluidic hydrodynamic sequential injection system for determination of phosphate.

PubMed

Khongpet, Wanpen; Pencharee, Somkid; Puangpila, Chanida; Kradtap Hartwell, Supaporn; Lapanantnoppakhun, Somchai; Jakmunee, Jaroon

2018-01-15

A microfluidic hydrodynamic sequential injection (μHSI) spectrophotometric system was designed and fabricated. The system was built by laser engraving a manifold pattern on an acrylic block and sealing with another flat acrylic plate to form a microfluidic channel platform. The platform was incorporated with small solenoid valves to obtain a portable setup for programmable control of the liquid flow into the channel according to the HSI principle. The system was demonstrated for the determination of phosphate using a molybdenum blue method. An ascorbic acid, standard or sample, and acidic molybdate solutions were sequentially aspirated to fill the channel forming a stack zone before flowing to the detector. Under the optimum condition, a linear calibration graph in the range of 0.1-6mg P L -1 was obtained. The detection limit was 0.1mgL -1 . The system is compact (5.0mm thick, 80mm wide × 140mm long), durable, portable, cost-effective, and consumes little amount of chemicals (83μL each of molybdate and ascorbic acid, 133μL of the sample solution and 1.7mL of water carrier/run). It was applied for the determination of phosphate content in extracted soil samples. The percent recoveries of the analysis were obtained in the range of 91.2-107.3. The results obtained agreed well with those of the batch spectrophotometric method. Copyright © 2017 Elsevier B.V. All rights reserved.

Dentistry to the rescue of missing children: A review.

PubMed

Vij, Nitika; Kochhar, Gulsheen Kaur; Chachra, Sanjay; Kaur, Taranjot

2016-01-01

Today's society is becoming increasingly unsafe for children: we frequently hear about new incidents of missing children, which lead to emotional trauma for the loved ones and expose systemic failures of law and order. Parents can take extra precautions to ensure the safety of their children by educating them about ways to protect themselves and keep important records of the child such as updated color photographs, fingerprints, deoxyribonucleic acid (DNA) samples, etc., handy. However, in spite of all efforts, the problem of missing children still remains. Developments in the field of dentistry have empowered dentists with various tools and techniques to play a pivotal role in tracing a missing child. One such tool is Toothprints, a patented arch-shaped thermoplastic dental impression wafer developed by Dr. David Tesini, a paediatric dentist from Massachusetts. Toothprints enables a unique identification of the missing children not only through the bite impression but also through salivary DNA. Besides the use of Toothprints, a dentist can assist investigating agencies in identifying the missing children in multiple ways, including postmortem dental profiling, labeled dental fixtures, DNA extraction from teeth, and serial number engraving on the children's teeth. More importantly, all these tools cause minimal inconvenience to the individual, making a dentist's role in tracking a missing child even more significant. Thus, the simple discipline of maintaining timely dental records with the help of their dentists can save potential hassles for the parents in the future.

Rock Art at the Pleistocene/Holocene Boundary in Eastern South America

PubMed Central

Neves, Walter A.; Araujo, Astolfo G. M.; Bernardo, Danilo V.; Kipnis, Renato; Feathers, James K.

2012-01-01

Background Most investigations regarding the First Americans have primarily focused on four themes: when the New World was settled by humans; where they came from; how many migrations or colonization pulses from elsewhere were involved in the process; and what kinds of subsistence patterns and material culture they developed during the first millennia of colonization. Little is known, however, about the symbolic world of the first humans who settled the New World, because artistic manifestations either as rock-art, ornaments, and portable art objects dated to the Pleistocene/Holocene transition are exceedingly rare in the Americas. Methodology/Principal Findings Here we report a pecked anthropomorphic figure engraved in the bedrock of Lapa do Santo, an archaeological site located in Central Brazil. The horizontal projection of the radiocarbon ages obtained at the north profile suggests a minimum age of 9,370±40 BP, (cal BP 10,700 to 10,500) for the petroglyph that is further supported by optically stimulated luminescence (OSL) dates from sediment in the same stratigraphic unit, located between two ages from 11.7±0.8 ka BP to 9.9±0.7 ka BP. Conclusions These data allow us to suggest that the anthropomorphic figure is the oldest reliably dated figurative petroglyph ever found in the New World, indicating that cultural variability during the Pleistocene/Holocene boundary in South America was not restricted to stone tools and subsistence, but also encompassed the symbolic dimension. PMID:22384187

Apollo 11 Lunar Message For Mankind

NASA Technical Reports Server (NTRS)

1959-01-01

Millions of people on Earth watched via television as a message for all mankind was delivered to the Mare Tranquilitatis (Sea of Tranquility) region of the Moon during the historic Apollo 11 mission, where it still remains today. This commemorative plaque, attached to the leg of the Lunar Module (LM), Eagle, is engraved with the following words: 'Here men from the planet Earth first set foot upon the Moon July, 1969 A.D. We came in peace for all of mankind.' It bears the signatures of the Apollo 11 astronauts Neil A. Armstrong, commander; Michael Collins, Command Module (CM) pilot; and Edwin E. Aldrin, Jr., Lunar Module (LM) pilot along with the signature of the U.S. President Richard M. Nixon. The Apollo 11 mission launched from the Kennedy Space Center (KSC) in Florida via the Marshall Space Flight Center (MSFC) developed Saturn V launch vehicle on July 16, 1969 and safely returned to Earth on July 24, 1969. The CM, 'Columbia', piloted by Collins, remained in a parking orbit around the Moon while the LM, 'Eagle'', carrying astronauts Armstrong and Aldrin, landed on the Moon. On July 20, 1969, Armstrong was the first human to ever stand on the lunar surface, followed by Aldrin. During 2½ hours of surface exploration, the crew collected 47 pounds of lunar surface material for analysis back on Earth. With the success of Apollo 11, the national objective to land men on the Moon and return them safely to Earth had been accomplished.

Saturn Apollo Program

NASA Image and Video Library

1969-07-07

Millions of people on Earth watched via television as a message for all mankind was delivered to the Mare Tranquilitatis (Sea of Tranquility) region of the Moon during the historic Apollo 11 mission, where it still remains today. A technician holds the commemorative plaque that was later attached to the leg of the Lunar Module (LM), Eagle, engraved with the following words: “Here men from the planet Earth first set foot upon the Moon July, 1969 A.D. We came in peace for all of mankind.” It bears the signatures of the Apollo 11 astronauts Neil A. Armstrong, commander; Michael Collins, Command Module (CM) pilot; and Edwin E. Aldrin, Jr., Lunar Module (LM) pilot along with the signature of the U.S. President Richard M. Nixon. The Apollo 11 mission launched from the Kennedy Space Center (KSC) in Florida via the Marshall Space Flight Center (MSFC) developed Saturn V launch vehicle on July 16, 1969 and safely returned to Earth on July 24, 1969. The CM, “Columbia”, piloted by Collins, remained in a parking orbit around the Moon while the LM, “Eagle’’, carrying astronauts Armstrong and Aldrin, landed on the Moon. On July 20, 1969, Armstrong was the first human to ever stand on the lunar surface, followed by Aldrin. During 2½ hours of surface exploration, the crew collected 47 pounds of lunar surface material for analysis back on Earth. With the success of Apollo 11, the national objective to land men on the Moon and return them safely to Earth had been accomplished.

Saturn Apollo Program

NASA Image and Video Library

1959-07-21

Millions of people on Earth watched via television as a message for all mankind was delivered to the Mare Tranquilitatis (Sea of Tranquility) region of the Moon during the historic Apollo 11 mission, where it still remains today. This commemorative plaque, attached to the leg of the Lunar Module (LM), Eagle, is engraved with the following words: “Here men from the planet Earth first set foot upon the Moon July, 1969 A.D. We came in peace for all of mankind.” It bears the signatures of the Apollo 11 astronauts Neil A. Armstrong, commander; Michael Collins, Command Module (CM) pilot; and Edwin E. Aldrin, Jr., Lunar Module (LM) pilot along with the signature of the U.S. President Richard M. Nixon. The Apollo 11 mission launched from the Kennedy Space Center (KSC) in Florida via the Marshall Space Flight Center (MSFC) developed Saturn V launch vehicle on July 16, 1969 and safely returned to Earth on July 24, 1969. The CM, “Columbia”, piloted by Collins, remained in a parking orbit around the Moon while the LM, “Eagle’’, carrying astronauts Armstrong and Aldrin, landed on the Moon. On July 20, 1969, Armstrong was the first human to ever stand on the lunar surface, followed by Aldrin. During 2½ hours of surface exploration, the crew collected 47 pounds of lunar surface material for analysis back on Earth. With the success of Apollo 11, the national objective to land men on the Moon and return them safely to Earth had been accomplished.

Apollo 11 Lunar Message For Mankind

NASA Technical Reports Server (NTRS)

1969-01-01

Millions of people on Earth watched via television as a message for all mankind was delivered to the Mare Tranquilitatis (Sea of Tranquility) region of the Moon during the historic Apollo 11 mission, where it still remains today. A technician holds the commemorative plaque that was later attached to the leg of the Lunar Module (LM), Eagle, engraved with the following words: 'Here men from the planet Earth first set foot upon the Moon July, 1969 A.D. We came in peace for all of mankind.' It bears the signatures of the Apollo 11 astronauts Neil A. Armstrong, commander; Michael Collins, Command Module (CM) pilot; and Edwin E. Aldrin, Jr., Lunar Module (LM) pilot along with the signature of the U.S. President Richard M. Nixon. The Apollo 11 mission launched from the Kennedy Space Center (KSC) in Florida via the Marshall Space Flight Center (MSFC) developed Saturn V launch vehicle on July 16, 1969 and safely returned to Earth on July 24, 1969. The CM, 'Columbia', piloted by Collins, remained in a parking orbit around the Moon while the LM, 'Eagle'', carrying astronauts Armstrong and Aldrin, landed on the Moon. On July 20, 1969, Armstrong was the first human to ever stand on the lunar surface, followed by Aldrin. During 2½ hours of surface exploration, the crew collected 47 pounds of lunar surface material for analysis back on Earth. With the success of Apollo 11, the national objective to land men on the Moon and return them safely to Earth had been accomplished.

Hunting the Extinct Steppe Bison (Bison priscus) Mitochondrial Genome in the Trois-Frères Paleolithic Painted Cave

PubMed Central

Marsolier-Kergoat, Marie-Claude; Palacio, Pauline; Berthonaud, Véronique; Maksud, Frédéric; Stafford, Thomas; Bégouën, Robert; Elalouf, Jean-Marc

2015-01-01

Despite the abundance of fossil remains for the extinct steppe bison (Bison priscus), an animal that was painted and engraved in numerous European Paleolithic caves, a complete mitochondrial genome sequence has never been obtained for this species. In the present study we collected bone samples from a sector of the Trois-Frères Paleolithic cave (Ariège, France) that formerly functioned as a pitfall and was sealed before the end of the Pleistocene. Screening the DNA content of the samples collected from the ground surface revealed their contamination by Bos DNA. However, a 19,000-year-old rib collected on a rock apart the pathway delineated for modern visitors was devoid of such contaminants and reproducibly yielded Bison priscus DNA. High-throughput shotgun sequencing combined with conventional PCR analysis of the rib DNA extract enabled to reconstruct a complete mitochondrial genome sequence of 16,318 bp for the extinct steppe bison with a 10.4-fold coverage. Phylogenetic analyses robustly established the position of the Bison priscus mitochondrial genome as basal to the clade delineated by the genomes of the modern American Bison bison. The extinct steppe bison sequence, which exhibits 93 specific polymorphisms as compared to the published Bison bison mitochondrial genomes, provides an additional resource for the study of Bovinae specimens. Moreover this study of ancient DNA delineates a new research pathway for the analysis of the Magdalenian Trois-Frères cave. PMID:26083419

Hunting the Extinct Steppe Bison (Bison priscus) Mitochondrial Genome in the Trois-Frères Paleolithic Painted Cave.

PubMed

Marsolier-Kergoat, Marie-Claude; Palacio, Pauline; Berthonaud, Véronique; Maksud, Frédéric; Stafford, Thomas; Bégouën, Robert; Elalouf, Jean-Marc

2015-01-01

Despite the abundance of fossil remains for the extinct steppe bison (Bison priscus), an animal that was painted and engraved in numerous European Paleolithic caves, a complete mitochondrial genome sequence has never been obtained for this species. In the present study we collected bone samples from a sector of the Trois-Frères Paleolithic cave (Ariège, France) that formerly functioned as a pitfall and was sealed before the end of the Pleistocene. Screening the DNA content of the samples collected from the ground surface revealed their contamination by Bos DNA. However, a 19,000-year-old rib collected on a rock apart the pathway delineated for modern visitors was devoid of such contaminants and reproducibly yielded Bison priscus DNA. High-throughput shotgun sequencing combined with conventional PCR analysis of the rib DNA extract enabled to reconstruct a complete mitochondrial genome sequence of 16,318 bp for the extinct steppe bison with a 10.4-fold coverage. Phylogenetic analyses robustly established the position of the Bison priscus mitochondrial genome as basal to the clade delineated by the genomes of the modern American Bison bison. The extinct steppe bison sequence, which exhibits 93 specific polymorphisms as compared to the published Bison bison mitochondrial genomes, provides an additional resource for the study of Bovinae specimens. Moreover this study of ancient DNA delineates a new research pathway for the analysis of the Magdalenian Trois-Frères cave.

A novel reciprocating micropump based on Lorentz force

NASA Astrophysics Data System (ADS)

Salari, Alinaghi; Hakimsima, Abbas; Shafii, Mohammad Behshad

2015-03-01

Lorentz force is the pumping basis of many electromagnetic micropumps used in lab-on-a-chip. In this paper a novel reciprocating single-chamber micropump is proposed, in which the actuation technique is based on Lorentz force acting on an array of microwires attached on a membrane surface. An alternating current is applied through the microwires in the presence of a magnetic field. The resultant force causes the membrane to oscillate and pushes the fluid to flow through microchannel using a ball-valve. The pump chamber (3 mm depth) was fabricated on a Polymethylmethacrylate (PMMA) substrate using laser engraving technique. The chamber was covered by a 60 μm thick hyper-elastic latex rubber diaphragm. Two miniature permanent magnets capable of providing magnetic field of 0.09 T at the center of the diaphragm were mounted on each side of the chamber. Square wave electric current with low-frequencies was generated using a function generator. Cylindrical copper microwires (250 μm diameter and 5 mm length) were attached side-by-side on top surface of the diaphragm. Thin loosely attached wires were used as connectors to energize the electrodes. Due to large displacement length of the diaphragm (~3 mm) a high efficiency (~90%) ball valve (2 mm diameter stainless steel ball in a tapered tubing structure) was used in the pump outlet. The micropump exhibits a flow rate as high as 490 μl/s and pressure up to 1.5 kPa showing that the pump is categorized among high-flow-rate mechanical micropumps.

Acute toxic effects of single dose dacarbazine: hematological and histological changes in an animal model.

PubMed

Milijašević, B; Stefanović, D; Lalić-Popović, M; Tomić, Z; Kolarović, J; Lalošević, D; Mikov, M

2014-11-01

Treatment of advanced soft tissue sarcoma usually includes dacarbazine (DTIC), an alkylating agent that methylates DNA and is active during all phases of the cell cycle. Common side effects of DTIC include nausea, vomiting, impaired liver and kidney function, myelosuppression, and pneumonia. There are no accounts, however, of histological and hematological changes caused by DTIC. We investigated acute hematological and morphological changes in different organs and in tumors that were caused by a single dose of DTIC. Adult Syrian golden hamsters were inoculated with a suspension of tumorigenic baby hamster kidney (BHK) cells by subcutaneous injection. On day 14 after inoculation, doses of 1.4, 1.6, 1.8 or 2.0 g/m(2) DTIC were injected intraperitoneally into the hamsters. Hamsters in the control group were injected with physiological saline in the same way. Seven days after drug or saline injection the animals were sacrificed and samples of blood, heart, kidney, liver, lungs, spleen, small intestine and tumor were excised, processed and analyzed. Mitoses were counted using an ocular extension with engraved frame. Anemia, thrombocytopenia and leukocytosis were found in the control group of hamsters with fibrosarcoma, whereas animals with fibrosarcoma treated with DTIC developed anemia, thrombocytopenia and leukopenia. Severe pneumonia and moderate hepatitis were detected in all DTIC treated groups. Effects of DTIC on tumor cells included rounding and enlargement of nuclei and rarefaction of chromatin. The number of mitoses was reduced with increasing doses of DTIC. Hepatitis, myelosuppression, pneumonia, and dose-related inhibition of tumor cell proliferation were observed after a single dose of DTIC.

Communication in healthcare: a narrative review of the literature and practical recommendations.

PubMed

Vermeir, P; Vandijck, D; Degroote, S; Peleman, R; Verhaeghe, R; Mortier, E; Hallaert, G; Van Daele, S; Buylaert, W; Vogelaers, D

2015-11-01

Effective and efficient communication is crucial in healthcare. Written communication remains the most prevalent form of communication between specialised and primary care. We aimed at reviewing the literature on the quality of written communication, the impact of communication inefficiencies and recommendations to improve written communication in healthcare. Narrative literature review. A search was carried out on the databases PubMed, Web of Science and The Cochrane Library by means of the (MeSH)terms 'communication', 'primary health care', 'correspondence', 'patient safety', 'patient handoff' and 'continuity of patient care'. Reviewers screened 4609 records and 462 full texts were checked according following inclusion criteria: (1) publication between January 1985 and March 2014, (2) availability as full text in English, (3) categorisation as original research, reviews, meta-analyses or letters to the editor. A total of 69 articles were included in this review. It was found that poor communication can lead to various negative outcomes: discontinuity of care, compromise of patient safety, patient dissatisfaction and inefficient use of valuable resources, both in unnecessary investigations and physician worktime as well as economic consequences. There is room for improvement of both content and timeliness of written communication. The delineation of ownership of the communication process should be clear. Peer review, process indicators and follow-up tools are required to measure the impact of quality improvement initiatives. Communication between caregivers should feature more prominently in graduate and postgraduate training, to become engraved as an essential skill and quality characteristic of each caregiver. © 2015 The Authors. International Journal of Clinical Practice Published by John Wiley & Sons Ltd.

Style and non-style in anatomical illustration: From Renaissance Humanism to Henry Gray.

PubMed

Kemp, Martin

2010-02-01

Style is a familiar category for the analysis of art. It is less so in the history of anatomical illustration. The great Renaissance and Baroque picture books of anatomy illustrated with stylish woodcuts and engravings, such as those by Charles Estienne, Andreas Vesalius and Govard Bidloo, showed figures in dramatic action in keeping with philosophical and theological ideas about human nature. Parallels can be found in paintings of the period, such as those by Titian, Michelangelo and Hans Baldung Grien. The anatomists also claimed to portray the body in an objective manner, and showed themselves as heroes of the discovery of human knowledge. Rembrandt's painting of Dr Nicholas Tulp is the best-known image of the anatomist as hero. The British empirical tradition in the 18th century saw William Cheselden and William Hunter working with techniques of representation that were intended to guarantee detailed realism. The ambition to portray forms life-size led to massive volumes, such as those by Antonio Mascagni. John Bell, the Scottish anatomist, criticized the size and pretensions of the earlier books and argued for a plain style adapted to the needs of teaching and surgery. Henry Gray's famous Anatomy of 1858, illustrated by Henry Vandyke Carter, aspired to a simple descriptive mode of functional representation that avoided stylishness, resulting in a style of its own. Successive editions of Gray progressively saw the replacement of Gray's method and of all his illustrations. The 150th anniversary edition, edited by Susan Standring, radically re-thinks the role of Gray's book within the teaching of medicine.

Style and non-style in anatomical illustration: From Renaissance Humanism to Henry Gray

PubMed Central

Kemp, Martin

2010-01-01

Style is a familiar category for the analysis of art. It is less so in the history of anatomical illustration. The great Renaissance and Baroque picture books of anatomy illustrated with stylish woodcuts and engravings, such as those by Charles Estienne, Andreas Vesalius and Govard Bidloo, showed figures in dramatic action in keeping with philosophical and theological ideas about human nature. Parallels can be found in paintings of the period, such as those by Titian, Michelangelo and Hans Baldung Grien. The anatomists also claimed to portray the body in an objective manner, and showed themselves as heroes of the discovery of human knowledge. Rembrandt’s painting of Dr Nicholas Tulp is the best-known image of the anatomist as hero. The British empirical tradition in the 18th century saw William Cheselden and William Hunter working with techniques of representation that were intended to guarantee detailed realism. The ambition to portray forms life-size led to massive volumes, such as those by Antonio Mascagni. John Bell, the Scottish anatomist, criticized the size and pretensions of the earlier books and argued for a plain style adapted to the needs of teaching and surgery. Henry Gray’s famous Anatomy of 1858, illustrated by Henry Vandyke Carter, aspired to a simple descriptive mode of functional representation that avoided stylishness, resulting in a style of its own. Successive editions of Gray progressively saw the replacement of Gray’s method and of all his illustrations. The 150th anniversary edition, edited by Susan Standring, radically re-thinks the role of Gray’s book within the teaching of medicine. PMID:20447244

Microfabrication of channel arrays promotes vessel-like network formation in cardiac cell construct and vascularization in vivo.

PubMed

Zieber, Liran; Or, Shira; Ruvinov, Emil; Cohen, Smadar

2014-06-01

Pre-vascularization is important for the reconstruction of dense and metabolically active myocardial tissue and its integration with the host myocardium after implantation. Herein, we demonstrate that the fabrication of micro-channels in alginate scaffold combined with the presentation of adhesion peptides and an angiogenic growth factor promote vessel-like networks in the construct, both in vitro and in vivo. Using a CO2 laser engraving system, 200 µm diameter channels were formed from top to bottom of the 2 mm thick alginate scaffold, with a channel-to-channel distance of 400 µm. Cells were seeded in a sequential manner onto the scaffolds: first, human umbilical vascular endothelial cells (HUVECs) were seeded and cultured for three days, then neonatal rat cardiomyocytes (CMs) and cardiofibroblasts were added at a final cell ratio of 50:35:15, respectively, and the constructs were cultivated for an additional seven days. A vessel-like network was formed within the cell constructs, wherein HUVECs were organized around the channels in a multilayer manner, while the CMs were located in-between the channels and exhibited the characteristic morphological features of a mature cardiac fiber. Acellular scaffolds with the affinity-bound basic fibroblast growth factor were implanted subcutaneously in mice. Increased cell penetration into the channeled scaffold and greater vessel density were found in comparison with the nonchanneled scaffolds. Our results thus point to the importance of micro-channels as a major structural promoter of vascularization in scaffolds, in conjunction with the sequential preculture of ECs and angiogenic factor presentation.

Closeout of JOYO-1 Specimen Fabrication Efforts

DOE Office of Scientific and Technical Information (OSTI.GOV)

ME Petrichek; JL Bump; RF Luther

2005-10-31

Fabrication was well under way for the JOYO biaxial creep and tensile specimens when the NR Space program was canceled. Tubes of FS-85, ASTAR-811C, and T-111 for biaxial creep specimens had been drawn at True Tube (Paso Robles, CA), while tubes of Mo-47.5 Re were being drawn at Rhenium Alloys (Cleveland, OH). The Mo-47.5 Re tubes are now approximately 95% complete. Their fabrication and the quantities produced will be documented at a later date. End cap material for FS-85, ASTAR-811C, and T-111 had been swaged at Pittsburgh Materials Technology, Inc. (PMTI) (Large, PA) and machined at Vangura (Clairton, PA). Cuttingmore » of tubes, pickling, annealing, and laser engraving were in process at PMTI. Several biaxial creep specimen sets of FS-85, ASTAR-811C, and T-111 had already been sent to Pacific Northwest National Laboratory (PNNL) for weld development. In addition, tensile specimens of FS-85, ASTAR-811C, T-111, and Mo-47.5 Re had been machined at Kin-Tech (North Huntington, PA). Actual machining of the other specimen types had not been initiated. Flowcharts 1-3 detail the major processing steps each piece of material has experienced. A more detailed description of processing will be provided in a separate document [B-MT(SRME)-51]. Table 1 lists the in-process materials and finished specimens. Also included are current metallurgical condition of these materials and specimens. The available chemical analyses for these alloys at various points in the process are provided in Table 2.« less

Border Cave and the beginning of the Later Stone Age in South Africa

PubMed Central

Villa, Paola; Soriano, Sylvain; Tsanova, Tsenka; Degano, Ilaria; Higham, Thomas F. G.; d’Errico, Francesco; Backwell, Lucinda; Lucejko, Jeannette J.; Colombini, Maria Perla; Beaumont, Peter B.

2012-01-01

The transition from the Middle Stone Age (MSA) to the Later Stone Age (LSA) in South Africa was not associated with the appearance of anatomically modern humans and the extinction of Neandertals, as in the Middle to Upper Paleolithic transition in Western Europe. It has therefore attracted less attention, yet it provides insights into patterns of technological evolution not associated with a new hominin. Data from Border Cave (KwaZulu-Natal) show a strong pattern of technological change at approximately 44–42 ka cal BP, marked by adoption of techniques and materials that were present but scarcely used in the previous MSA, and some novelties. The agent of change was neither a revolution nor the advent of a new species of human. Although most evident in personal ornaments and symbolic markings, the change from one way of living to another was not restricted to aesthetics. Our analysis shows that: (i) at Border Cave two assemblages, dated to 45–49 and >49 ka, show a gradual abandonment of the technology and tool types of the post-Howiesons Poort period and can be considered transitional industries; (ii) the 44–42 ka cal BP assemblages are based on an expedient technology dominated by bipolar knapping, with microliths hafted with pitch from Podocarpus bark, worked suid tusks, ostrich eggshell beads, bone arrowheads, engraved bones, bored stones, and digging sticks; (iii) these assemblages mark the beginning of the LSA in South Africa; (iv) the LSA emerged by internal evolution; and (v) the process of change began sometime after 56 ka. PMID:22847432

In situ study of the Gravettian individual from Cussac cave, locus 2 (Dordogne, France).

PubMed

Villotte, Sébastien; Santos, Frédéric; Courtaud, Patrice

2015-12-01

Cussac cave, discovered in 2000, is characterized by the exceptional presence of monumental engravings and human remains deposited in bear nests. Both the style of the art and a direct radiocarbon date indicate a Gravettian age. As the cave is protected as a national heritage site, only very limited access to and restricted direct interventions involving the human remains are possible. Here, we present the results of observations and measurements of Cussac L2A, represented by a virtually complete skeleton covered with a layer of clay. A portion of the clay that covered some bones was removed in order to undertake a study of the skeleton in situ. The age-at-death was assessed using several indicators, especially changes on the auricular surface of the ilium. The sex was assessed using the morphology and morphometrics of the coxal bones. Cussac L2A stature, humero-femoral index, and crural index were also estimated. The dimensions of the Cussac L2A skeletal remains are compared with the other European Gravettian and Late Upper Paleolithic human remains using adjusted Z-Scores. The analysis indicates that Cussac L2A is probably a male who died aged between 20 and 50 years. If the sex assessment is correct, with an averaged estimated stature of 1.64 m, Cussac L2A would be one of the shorter Gravettian males. These results raise the importance of the new discoveries to better understand the variability of Upper Paleolithic skeletal morphology and stress the difficulties in marrying heritage preservation and scientific investigations. © 2015 Wiley Periodicals, Inc.

Bronze age cosmology and rock art images. Solar ships, deer and charts

NASA Astrophysics Data System (ADS)

Dimitriadis, G.

Bronze Age societies were technologically complex. The impressive production of metal artefacts embodies clearly their astronomical culture and cosmological viewpoint. Same ascertainment is valid also for rock art. In fact, around the European landscape were discovered several cliffs engraved with solar ships, deer and charts. How one could be interpret them? Which is the hidden mentality? From the end of 3rd millennium-early 2nd millennium B. C. deep technological transformations are made by metals. New inventions such metal extraction for weapon production, horse pulling chariot used for war and the bull pulling one used for trade may shorten the culture and material distances between Central Europe and South Mediterranean area. Indeed, taphonomic studies indicate a specific modification of the human body mortuary traditional disposition (orientated to significant astronomical targets) below a substantial transformation of mortuary apparatus with spot evidence of weapons (halberds, swords, knifes) and ornaments (double spiral, lunar shape pectorals). The famous Trundhold Solar chart, the 2nd millennium terracotta chart form Dupljaja, the solar boats petroglyph in Bohusland and the horse rider carved on Philippi's cliffs were conceived by the same mentality: communion with the divinity. Culture expressions as communicate manifestation attested in rock art were produced by the same mentality presented in Bronze Age art-crafts such as, 1. Culture epidemiologic patterns dispersion took place through out iconographic motives, and, 2. Animals can play a double face function inside an analogical-mythological system: a. animal-reflex; b. animal-agent. The question is: Could such petroglyphs help us to "read" archaeoastronomical properly in an archaeological site?

Surface ablation of inorganic transparent materials using 70W femtosecond pulses at 1MHz (Conference Presentation)

NASA Astrophysics Data System (ADS)

Mishchik, Konstantin; Gaudfrin, Kevin; Audouard, Eric F.; Mottay, Eric P.; Lopez, John

2017-03-01

Nowadays processing of transparent materials, such as glass, quartz, sapphire and others, is a subject of high interest for worldwide industry since these materials are widely used for mass markets such as consumer electronics, flat display panels manufacturing, optoelectronics or watchmaking industry. The key issue is to combine high throughput, low residual stress and good processing quality in order to avoid chipping and any post-processing step such as grinding or polishing. Complimentary to non-ablative techniques used for zero-kerf glass cutting, surface ablation of such materials is interesting for engraving, grooving as well as full ablation cutting. Indeed this technique enables to process complex parts including via or blind, open or closed, straight or small radius of curvature patterns. We report on surface ablation experiments on transparent materials using a high average power (70W) and high repetition rate (1 MHz) femtosecond laser. These experiments have been done at 1030nm and 515nm on different inorganic transparent materials, such as regular and strengthened glass, borosilicate glass or sapphire, in order to underline their different ablation behavior. Despite the heat accumulation that occurs above 100 kHz we have reached a good compromise between throughput and processing quality. The effects of fluence, pulse-to-pulse overlap and number of passes are discussed in terms of etch rate, ablation efficiency, optimum fluence, maximum achievable depth, micro cracks formation and residual stresses. These experimental results will be also compared with numerical calculations obtained owing to a simple engineering model based on the two-temperature description of the ultrafast ablation.