Removal of MS2, Qβ and GA bacteriophages during drinking water treatment at pilot scale.

PubMed

Boudaud, Nicolas; Machinal, Claire; David, Fabienne; Fréval-Le Bourdonnec, Armelle; Jossent, Jérôme; Bakanga, Fanny; Arnal, Charlotte; Jaffrezic, Marie Pierre; Oberti, Sandrine; Gantzer, Christophe

2012-05-15

The removal of MS2, Qβ and GA, F-specific RNA bacteriophages, potential surrogates for pathogenic waterborne viruses, was investigated during a conventional drinking water treatment at pilot scale by using river water, artificially and independently spiked with these bacteriophages. The objective of this work is to develop a standard system for assessing the effectiveness of drinking water plants with respect to the removal of MS2, Qβ and GA bacteriophages by a conventional pre-treatment process (coagulation-flocculation-settling-sand filtration) followed or not by an ultrafiltration (UF) membrane (complete treatment process). The specific performances of three UF membranes alone were assessed by using (i) pre-treated water and (ii) 0.1 mM sterile phosphate buffer solution (PBS), spiked with bacteriophages. These UF membranes tested in this work were designed for drinking water treatment market and were also selected for research purpose. The hypothesis serving as base for this study was that the interfacial properties for these three bacteriophages, in terms of electrostatic charge and the degree of hydrophobicity, could induce variations in the removal performances achieved by drinking water treatments. The comparison of the results showed a similar behaviour for both MS2 and Qβ surrogates whereas it was particularly atypical for the GA surrogate. The infectious character of MS2 and Qβ bacteriophages was mostly removed after clarification followed by sand filtration processes (more than a 4.8-log reduction) while genomic copies were removed at more than a 4.0-log after the complete treatment process. On the contrary, GA bacteriophage was only slightly removed by clarification followed by sand filtration, with less than 1.7-log and 1.2-log reduction, respectively. After the complete treatment process achieved, GA bacteriophage was removed with less than 2.2-log and 1.6-log reduction, respectively. The effectiveness of the three UF membranes tested in terms of bacteriophages removal showed significant differences, especially for GA bacteriophage. These results could provide recommendations for drinking water suppliers in terms of selection criteria for membranes. MS2 bacteriophage is widely used as a surrogate for pathogenic waterborne viruses in Europe and the United States. In this study, the choice of MS2 bacteriophage as the best surrogate to be used for assessment of the effectiveness of drinking water treatment in removal of pathogenic waterborne viruses in worst conditions is clearly challenged. It was shown that GA bacteriophage is potentially a better surrogate as a worst case than MS2. Considering GA bacteriophage as the best surrogate in this study, a chlorine disinfection step could guaranteed a complete removal of this model and ensure the safety character of drinking water plants. Copyright © 2012 Elsevier Ltd. All rights reserved.

Effective removal of equine arteritis virus from stallion semen.

PubMed

Morrell, J M; Geraghty, R M

2006-05-01

A method of removing equine arteritis virus (EAV) from equine semen used for artificial insemination is urgently needed. Recent medical studies suggest that a double semen processing technique of density gradient centrifugation followed by a 'swim-up' can provide virus-free sperm preparations for assisted reproduction. To investigate the use of the double semen processing technique to obtain virus-free sperm preparations from stallion semen containing EAV. Aliquots of an ejaculate from an uninfected stallion were spiked with virus and processed by the double processing technique. The sperm preparations were tested by PCR for the presence of EAV. The procedure was repeated using an ejaculate from a known shedding stallion, testing processed and unprocessed aliquots by PCR and virus isolation. Virus-free sperm preparations were obtained using the double sperm processing technique. The 'swim-up' step is apparently required to ensure complete virus removal. The double semen processing technique is potentially a useful and simple tool for the removal of EAV from the semen of shedding stallions. The inclusion of density gradient centrifugation and 'swim-up' in protocols for the processing of semen for artificial insemination could help prevent the transmission of viral diseases carried in semen, such as EAV.

Increasing the speed of tumour diagnosis during surgery with selective scanning Raman microscopy

NASA Astrophysics Data System (ADS)

Kong, Kenny; Rowlands, Christopher J.; Varma, Sandeep; Perkins, William; Leach, Iain H.; Koloydenko, Alexey A.; Pitiot, Alain; Williams, Hywel C.; Notingher, Ioan

2014-09-01

One of the main challenges in cancer surgery is ensuring that all tumour cells are removed during surgery, while sparing as much healthy tissue as possible. Histopathology, the gold-standard technique for cancer diagnosis, is often impractical for intra-operative use because of the time-consuming tissue preparation procedures (sectioning and staining). Raman micro-spectroscopy is a powerful technique that can discriminate between tumours and healthy tissues with high accuracy, based entirely on intrinsic chemical differences. However, raster-scanning Raman micro-spectroscopy is a slow imaging technique that typically requires data acquisition times as long as several days for typical tissue samples obtained during surgery (1 × 1 cm2) - in particular when high signal-to-noise ratio spectra are required to ensure accurate diagnosis. In this paper we present two techniques based on selective sampling Raman micro-spectroscopy that can overcome these limitations. In selective sampling, information regarding the spatial features of the tissue, either measured by an alternative optical technique or estimated in real-time from the Raman spectra, can be used to drastically reduce the number of Raman spectra required for diagnosis. These sampling strategies allowed diagnosis of basal cell carcinoma in skin tissue samples excised during Mohs micrographic surgery faster than frozen section histopathology, and two orders of magnitude faster than previous techniques based on raster-scanning Raman microscopy. Further development of these techniques may help during cancer surgery by providing a fast and objective way for surgeons to ensure the complete removal of tumour cells while sparing as much healthy tissue as possible.

Effluent Treatment Technologies in the Iron and Steel Industry - A State of the Art Review.

PubMed

Das, Pallabi; Mondal, Gautam C; Singh, Siddharth; Singh, Abhay K; Prasad, Bably; Singh, Krishna K

2018-05-01

  Iron and steel industry is the principal driving force propelling economic and technological growth of a nation. However, since its inception this industry is associated with widespread environmental pollution and enormous water consumption. Different units of a steel plant discharge effluents loaded with toxic, hazardous pollutants, and unutilized components which necessitates mitigation. In this paper, pollutant removal efficiency, effluent volume product quality, and economic feasibility of existing treatments are studied vis-à-vis their merits, demerits, and innovations to access their shortcomings which can be overcome with new technology to identify future research directions. While conventional methods are inadequate for complete remediation and water reclamation, the potential of advanced treatments, like membrane separation, remains relatively untapped. It is concluded that integrated systems combining membrane separation with chemical treatments can guarantee a high degree of contaminant removal, reusability of effluents concurrently leading to process intensification ensuring ecofriendliness and commercial viability.

A Case of Trigeminocardiac Reflex During Infrastructure Maxillectomy.

PubMed

Mohan, Suresh; Flis, Daniel W; O'Leary, Miriam A

2014-06-01

The trigeminocardiac reflex refers to the sudden development of bradycardia or even asystole with arterial hypotension from manipulation of any sensory branches of the trigeminal nerve. Although it has only rarely been associated with morbidity and tends to be self-limited with removal of the stimulus, it is an important phenomenon for head and neck surgeons to recognize and respond to. We present the case of a woman in her late 60s with maxillary alveolar ridge squamous cell carcinoma who developed episodes of asystole and bradycardia during posterior maxillary manipulation for an infrastructure maxillectomy at a tertiary academic medical center. Administration of atropine and removal of the inciting stimulus sufficed to extinguish the episodes and allow procedure completion. The trigeminocardiac reflex can be provoked by a number of head and neck and skull base procedures including parotidectomy and posterior maxillectomy. Surgeons and anesthesiologists should be wary of inciting the reflex during manipulation of trigeminal branches. Careful dissection for prevention and early intervention with stimulus removal and anticholinergic use as needed are paramount to ensure good outcomes.

KSC-04pd1428

NASA Image and Video Library

2004-07-07

KENNEDY SPACE CENTER, FLA. - - Workers in the Orbiter Processing Facility complete the installation of the Reinforced Carbon-Carbon panel on Discovery. The chin panel is the smile-shaped section of RCC directly below the nose cap that provides a thermal barrier during re-entry. The nose cap, with chin panel, was removed from the vehicle in the summer of 2003 and returned to the vendor, where it underwent numerous forms of Non-Destructive Evaluation. These tests included X-ray, ultrasound and eddy current to ensure its structural integrity prior to reinstallation. Discovery is designated as the Return to Flight vehicle for mission STS-114, no earlier than March 2005.

F Reactor Inspection

ScienceCinema

Grindstaff, Keith; Hathaway, Boyd; Wilson, Mike

2018-01-16

Workers from Mission Support Alliance, LLC., removed the welds around the steel door of the F Reactor before stepping inside the reactor to complete its periodic inspection. This is the first time the Department of Energy (DOE) has had the reactor open since 2008. The F Reactor is one of nine reactors along the Columbia River at the Department's Hanford Site in southeastern Washington State, where environmental cleanup has been ongoing since 1989. As part of the Tri-Party Agreement, the Department completes surveillance and maintenance activities of cocooned reactors periodically to evaluate the structural integrity of the safe storage enclosure and to ensure confinement of any remaining hazardous materials. "This entry marks a transition of sorts because the Hanford Long-Term Stewardship Program, for the first time, was responsible for conducting the entry and surveillance and maintenance activities," said Keith Grindstaff, Energy Department Long-Term Stewardship Program Manager. "As the River Corridor cleanup work is completed and transitioned to long-term stewardship, our program will manage any on-going requirements."

F Reactor Inspection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grindstaff, Keith; Hathaway, Boyd; Wilson, Mike

2014-10-29

Workers from Mission Support Alliance, LLC., removed the welds around the steel door of the F Reactor before stepping inside the reactor to complete its periodic inspection. This is the first time the Department of Energy (DOE) has had the reactor open since 2008. The F Reactor is one of nine reactors along the Columbia River at the Department's Hanford Site in southeastern Washington State, where environmental cleanup has been ongoing since 1989. As part of the Tri-Party Agreement, the Department completes surveillance and maintenance activities of cocooned reactors periodically to evaluate the structural integrity of the safe storage enclosuremore » and to ensure confinement of any remaining hazardous materials. "This entry marks a transition of sorts because the Hanford Long-Term Stewardship Program, for the first time, was responsible for conducting the entry and surveillance and maintenance activities," said Keith Grindstaff, Energy Department Long-Term Stewardship Program Manager. "As the River Corridor cleanup work is completed and transitioned to long-term stewardship, our program will manage any on-going requirements."« less

33 CFR 157.170 - COW equipment: Removal.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false COW equipment: Removal. 157.170... Crude Oil Washing (COW) System on Tank Vessels Cow Operations § 157.170 COW equipment: Removal. (a) Whenever a deck mounted COW machine is removed from the tank, the master shall ensure that: (1) The supply...

The Pharmaceutical Capping Process-Correlation between Residual Seal Force, Torque Moment, and Flip-off Removal Force.

PubMed

Mathaes, Roman; Mahler, Hanns-Christian; Vorgrimler, Lothar; Steinberg, Henrik; Dreher, Sascha; Roggo, Yves; Nieto, Alejandra; Brown, Helen; Roehl, Holger; Adler, Michael; Luemkemann, Joerg; Huwyler, Joerg; Lam, Philippe; Stauch, Oliver; Mohl, Silke; Streubel, Alexander

2016-01-01

The majority of parenteral drug products are manufactured in glass vials with an elastomeric rubber stopper and a crimp cap. The vial sealing process is a critical process step during fill-and-finish operations, as it defines the seal quality of the final product. Different critical capping process parameters can affect rubber stopper defects, rubber stopper compression, container closure integrity, and also crimp cap quality. A sufficiently high force to remove the flip-off button prior to usage is required to ensure quality of the drug product unit by the flip-off button during storage, transportation, and until opening and use. Therefore, the final product is 100% visually inspected for lose or defective crimp caps, which is subjective as well as time- and labor-intensive. In this study, we sealed several container closure system configurations with different capping equipment settings (with corresponding residual seal force values) to investigate the torque moment required to turn the crimp cap. A correlation between torque moment and residual seal force has been established. The torque moment was found to be influenced by several parameters, including diameter of the vial head, type of rubber stopper (serum or lyophilized) and type of crimp cap (West(®) or Datwyler(®)). In addition, we measured the force required to remove the flip-off button of a sealed container closure system. The capping process had no influence on measured forces; however, it was possible to detect partially crimped vials. In conclusion, a controlled capping process with a defined target residual seal force range leads to a tight crimp cap on a sealed container closure system and can ensure product quality. The majority of parenteral drug products are manufactured in a glass vials with an elastomeric rubber stopper and a crimp cap. The vial sealing process is a critical process step during fill-and-finish operations, as it defines the seal quality of the final product. An adequate force to remove the flip-off button prior to usage is required to ensure product quality during storage and transportation until use. In addition, the complete crimp cap needs to be fixed in a tight position on the vial. In this study, we investigated the torque moment required to turn the crimp cap and the force required to remove the flip-off button of container closure system sealed with different capping equipment process parameters (having different residual seal force values). © PDA, Inc. 2016.

Fe(0)-Fe3O4 nanocomposites embedded polyvinyl alcohol/sodium alginate beads for chromium (VI) removal.

PubMed

Lv, Xiaoshu; Jiang, Guangming; Xue, Xiaoqin; Wu, Donglei; Sheng, Tiantian; Sun, Chen; Xu, Xinhua

2013-11-15

In this study, Fe(0)-Fe3O4 nanocomposites embedded polyvinyl alcohol (PVA)/sodium alginate (SA) beads were synthesized, which exhibited an excellent physical properties and catalytic reactivity, and a robust performance of post-separation (complete separation using a simple grille) and reusability (efficiency of 69.8% after four runs) in Cr(VI) removal. 5.0 wt% PVA with 1.5 wt% SA was the optimal proportion for beads molding, and the followed acidification and reduction treatments were critical to ensure high mechanical strength and high Cr(VI) removal ability of beads. Effects of Fe(0) and Fe3O4 mass fraction, initial pH and Cr(VI) concentration on final removal efficiency were also evaluated. Merely 0.075 wt% Fe(0) together with 0.30 wt% Fe3O4 was sufficient to deal with 20 mg L(-1) Cr(VI) solution. The efficiency decreased from 100 to 79.5% as initial Cr(VI) increased from 5 to 40 mg L(-1), while from 99.3 to 76.3% with increasing pH from 3.0 to 11.0. This work provides a practical and high-efficient method for heavy metal removal from water body, and simultaneously solves the problems in stabilization, separation and regeneration of Fe(0) nanoparticles. Copyright © 2013 Elsevier B.V. All rights reserved.

Novel single stripper with side-draw to remove ammonia and sour gas simultaneously for coal-gasification wastewater treatment and the industrial implementation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feng, D.C.; Yu, Z.J.; Chen, Y.

2009-06-15

A large amount of wastewater is produced in the Lurgi coal-gasification process with the complex compounds carbon dioxide, ammonia, phenol, etc., which cause a serious environmental problem. In this paper, a novel stripper operated at elevated pressure is designed to improve the pretreatment process. In this technology, two noticeable improvements were established. First, the carbon dioxide and ammonia were removed simultaneously in a single stripper where sour gas (mainly carbon dioxide) is removed from the tower top and the ammonia vapor is drawn from the side and recovered by partial condensation. Second, the ammonia is removed before the phenol recoverymore » to reduce the pH value of the subsequent extraction units, so as the phenol removal performance of the extraction is greatly improved. To ensure the operational efficiency, some key operational parameters are analyzed and optimized though simulation. It is shown that when the top temperature is kept at 40 C and the weight ratio of the side draw to the feed is above 9%, the elevated pressures can ensure the removal efficiency of NH{sub 3} and carbon dioxide and the desired purified water as the bottom product of the unit is obtained. A real industrial application demonstrates the attractiveness of the new technique: it removes 99.9% CO{sub 2} and 99.6% ammonia, compared to known techniques which remove 66.5% and 94.4%, respectively. As a result, the pH value of the wastewater is reduced from above 9 to below 7. This ensures that the phenol removal ratio is above 93% in the following extraction units. The operating cost is lower than that of known techniques, and the operation is simplified.« less

Failure Analysis of Cracked FS-85 Tubing and ASTAR-811C End Caps

DOE Office of Scientific and Technical Information (OSTI.GOV)

ME Petrichek

2006-02-09

Failure analyses were performed on cracked FS-85 tubing and ASTAR-811C and caps which had been fabricated as components of biaxial creep specimens meant to support materials testing for the NR Space program. During the failure analyses of cracked FS-85 tubing, it was determined that the failure potentially could be due to two effects: possible copper contamination from the EDM (electro-discharge machined) recast layer and/or an insufficient solution anneal. to prevent similar failures in the future, a more formal analysis should be done after each processing step to ensure the quality of the material before further processing. During machining of themore » ASTAR-811FC rod to form end caps for biaxial creep specimens, linear defects were observed along the center portion of the end caps. These defects were only found in material that was processed from the top portion of the ingot. The linear defects were attributed to a probable residual ingot pipe that was not removed from the ingot. During the subsequent processing of the ingot to rod, the processing temperatures were not high enough to allow self healing of the ingot's residual pipe defect. To prevent this from occurring in the future, it is necessary to ensure that complete removal of the as-melted ingot pipe is verified by suitable non-destructive evaluation (NDE).« less

Controlled Contamination of Epoxy Composites with PDMS and Removal by Laser Ablation

NASA Technical Reports Server (NTRS)

Palmieri, Frank; Ledesma, Rodolfo; Cataldo, Daniel; Lin, Yi; Wohl, Christopher; Gupta, Mool; Connell, John

2016-01-01

Surface preparation is critical to the performance of adhesively bonded composites. During manufacturing, minute quantities of mold release compounds are inevitably deposited on faying surfaces and may compromise bond performance. To ensure safety, mechanical fasteners and other crack arrest features must be installed in the bondlines of primary structures, which negates some advantages of adhesively bonded construction. Laser ablation is an automated, repeatable, and scalable process with high potential for the surface preparation of metals and composites in critical applications such as primary airframe structures. In this study, laser ablation is evaluated on composite surfaces for the removal of polydimethylsiloxane (PDMS), a common mold release material. Composite panels were contaminated uniformly with PDMS film thicknesses as low as 6.0 nm as measured by variable angle spectroscopic ellipsometry. Bond performance was assessed by mechanical testing using a 250 F cure, epoxy adhesive and compared with pre-bond surface inspection results. Water contact angle, optically stimulated electron emission, and laser induced breakdown spectroscopy were used to characterize contaminated and laser ablated surfaces. The failure mode obtained from double cantilever beam tests correlated well with surface characterization data. The test results indicated that even low levels of PDMS were not completely removed by laser ablation.

Anaerobic co-digestion of livestock and vegetable processing wastes: fibre degradation and digestate stability.

PubMed

Molinuevo-Salces, Beatriz; Gómez, Xiomar; Morán, Antonio; García-González, Mari Cruz

2013-06-01

Anaerobic digestion of livestock wastes (swine manure (SM) and poultry litter (PL)) and vegetable processing wastes (VPW) mixtures was evaluated in terms of methane yield, volatile solids removal and lignocellulosic material degradation. Batch experiments were performed with 2% VS (volatile solids) to ensure complete conversion of TVFAs (total volatile fatty acids) and to avoid ammonia inhibition. Experimental methane yields obtained for the mixtures resulted in higher values than those obtained from the sum of the methane yields from the individual components. VPW addition to livestock wastes before anaerobic digestion also resulted in improved VS elimination. In SM-VPW co-digestions, CH4 yield increased from 111 to 244 mL CH4 g VS added(-1), and the percentage of VS removed increased from 50% to 86%. For PL-VPW co-digestions, the corresponding values were increased from 158 to 223 mL CH4 g VS added(-1) and from 70% to 92% VS removed. Hemicelluloses and more than 50% of cellulose were degraded during anaerobic digestion. Thermal analyses indicated that the stabilization of the wastes during anaerobic digestion resulted in significantly less energy being released by digestate samples than fresh samples. Copyright © 2013 Elsevier Ltd. All rights reserved.

30 CFR 816.102 - Backfilling and grading: General requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... organic material shall be removed from the area. (2) The topsoil on the area shall be removed, segregated... may be allowed by the regulatory authority where— (1) Needed to conserve soil moisture, ensure...

30 CFR 816.102 - Backfilling and grading: General requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... organic material shall be removed from the area. (2) The topsoil on the area shall be removed, segregated... may be allowed by the regulatory authority where— (1) Needed to conserve soil moisture, ensure...

30 CFR 816.102 - Backfilling and grading: General requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... organic material shall be removed from the area. (2) The topsoil on the area shall be removed, segregated... may be allowed by the regulatory authority where— (1) Needed to conserve soil moisture, ensure...

30 CFR 816.102 - Backfilling and grading: General requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... organic material shall be removed from the area. (2) The topsoil on the area shall be removed, segregated... may be allowed by the regulatory authority where— (1) Needed to conserve soil moisture, ensure...

30 CFR 816.102 - Backfilling and grading: General requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... organic material shall be removed from the area. (2) The topsoil on the area shall be removed, segregated... may be allowed by the regulatory authority where— (1) Needed to conserve soil moisture, ensure...

The effect of low-temperature laundering and detergents on the survival of Escherichia coli and Staphylococcus aureus on textiles used in healthcare uniforms.

PubMed

Riley, K; Williams, J; Owen, L; Shen, J; Davies, A; Laird, K

2017-05-10

To determine the survival of Escherichia coli and Staphylococcus aureus on cotton and polyester and the effectiveness of low-temperature laundering and detergents on the removal of micro-organism from healthcare laundry. Survival of E. coli and S. aureus on polyester or cotton was assessed over 3 weeks and the efficacy of a domestic wash (40 and 60°C) and a range of detergents was also determined. Both bacteria were able to survive on cotton (5 log (10) ) and polyester (0·28 log (10) ) for up to 3 weeks. Laundering at 40°C resulted in a 3·5 log (10) removal of the initial 7·7 log (10) inoculum and some cross-contamination to sterile fabrics (3 log (10) ). Increasing the temperature to 60°C resulted in the complete removal of the initial inoculum. This study shows that most of the micro-organisms are removed at 40°C, however, those cells still remaining may have the potential for further contamination to the clinical environment and patients. National Health Service (NHS) nurses are required to domestically launder their uniforms at 60°C to ensure safe removal of micro-organisms, 33% of NHS staff questioned said they launder their uniforms at 40°C, which could potentially result in transmission of hospital-acquired infections. © 2017 The Society for Applied Microbiology.

Dead mouse hopping: Tyzzer's disease in spinifex hopping-mice (Notomys alexis).

PubMed

Stannard, Hayley J; Tulk, Melissa L; Old, Julie M

2017-03-01

Tyzzer's disease is caused by Clostridium piliformes and affects a wide range of domestic and wildlife species. Non-descript signs, if any, and a short incubation period make Tyzzer's disease difficult to diagnose and treat before death occurs. Here we describe an unexpected outbreak of Tyzzer's disease in a colony of native Australian spinifex hopping-mice (Notomys alexis). In this study captive hopping-mice were used in a nutrition trial (n=11), and others were housed in close proximity (n=4). During the nutrition trial, two hopping-mice exhibited signs of lethargy and diarrhoea, and were removed from the trial but died soon after. Other hopping-mice exhibited limited clinical signs of ill-health, prior to their death. In total four animals were found dead, and another seven were euthanised, to prevent a potential disease outbreak. Tyzzer's disease was confirmed post-mortem using histopathology silver stain to detect the bacilli-shaped bacteria (C. piliformes) in liver tissue of two hopping-mice. After Tyzzer's disease was confirmed enhanced infection control measures were implemented. Enhanced control measures included the use of metal containers for food and water, sick animals were fed and cleaned last, 5% sodium hypochlorite was used as the cleaning agent, stricter hand washing protocols and a change of gloves between feeding animals, and strict limits on persons entering the facility. Control measures for this disease should include euthanasia of any animals suspected to be infected, complete disinfection of all enclosures and associated equipment using sodium hypochlorite. Molecular methods could be employed to ensure complete removal of bacterial spores prior to new animals being moved into enclosures where affected animals were housed. Tyzzer's disease is a fast spreading disease which can cause detrimental effects to captive colonies and their environment. Captive colonies subjected to stress are at risk of Tyzzer's disease. Appropriate quarantine procedures, close montoring and quick action in response to signs of illness will ensure Tyzzer's disease outbreaks do not occur. Copyright © 2017 Elsevier B.V. All rights reserved.

Microbially mediated clinoptilolite regeneration in a multifunctional permeable reactive barrier used to remove ammonium from landfill leachate contamination: laboratory column evaluation.

PubMed

Nooten, Thomas Van; Diels, Ludo; Bastiaens, Leen

2010-05-01

This study focuses on multifunctional permeable reactive barrier (multibarrier) technology, combining microbial degradation and abiotic ion exchange processes for removal of ammonium from landfill leachate contamination. The sequential multibarrier concept relies on the use of a clinoptilolite-filled buffer compartment to ensure a robust ammonium removal in case of temporary insufficient microbial activities. An innovative strategy was developed to allow in situ clinoptilolite regeneration. Laboratory-scale clinoptilolite-filled columns were first saturated with ammonium, using real landfill leachate as well as synthetic leachates as feed media. Other inorganic metal cations, typically present in landfill leachate, had a detrimental influence on the ammonium removal capacity by competing for clinoptilolite exchange sites. On the other hand, the metals had a highly favorable impact on regeneration of the saturated material. Feeding the columns with leachate deprived from ammonium (e.g., by microbial nitrification in an upgradient compartment), resulted in a complete release of the previously sorbed ammonium from the clinoptilolite, due to exchange with metal cations present in the leachate. The released ammonium is then available for microbial consumption in a downgradient compartment. The regeneration process resulted in a slightly increased ammonium exchange capacity afterward. The described strategy throws a new light on sustainable use of sorption materials for in situ groundwater remediation, by avoiding the need for material replacement and the use of external chemical regenerants.

Impact of paint shop decanter effluents on biological treatability of automotive industry wastewater.

PubMed

Güven, Didem; Hanhan, Oytun; Aksoy, Elif Ceren; Insel, Güçlü; Çokgör, Emine

2017-05-15

A lab-scale Sequencing Batch Reactor (SBR) was implemented to investigate biological treatability and kinetic characteristics of paint shop wastewater (PSW) together with main stream wastewater (MSW) of a bus production factory. Readily biodegradable and slowly biodegradable COD fractions of MWS were determined by respirometric analysis: 4.2% (S S ), 10.4% (S H ) and 59.3% (X S ). Carbon and nitrogen removal performance of the SBR feeding with MSW alone were obtained as 89% and 58%, respectively. When PSW was introduced to MSW, both carbon and nitrogen removal were deteriorated. Model simulation indicated that maximum heterotrophic growth rate decreased from 7.2 to 5.7day -1 , maximum hydrolysis rates were reduced from 6 to 4day -1 (k hS ) and 4 to 1day -1 (k hX ). Based on the dynamic model simulation for the evaluation of nitrogen removal, a maximum specific nitrifier growth rate was obtained as 0.45day -1 for MSW feeding alone. When PSW was introduced, nitrification was completely inhibited and following the termination of PSW addition, nitrogen removal performance was recovered in about 100 days, however with a much lower nitrifier growth rate (0.1day -1 ), possibly due to accumulation of toxic compounds in the sludge. Obviously, a longer recovery period is required to ensure an active nitrifier community. Copyright © 2017 Elsevier B.V. All rights reserved.

Analysis of economic and environmental benefits of a new heat pump air conditioning system with a heat recovery device

NASA Astrophysics Data System (ADS)

Li, lingxue

2017-08-01

The paper designs a new wind-water cooling and heating water conditioner system, connects cooling tower with heat recovery device, which uses cooling water to completely remove the heat that does not need heat recollection, in order to ensure that the system can work efficiently with higher performance coefficient. After the test actual engineering operation, the system’s maximum cooling coefficient of performance can reach 3.5. Its maximum comprehensive coefficient of performance can reach 6.5. After the analysis of its economic and environmental, we conclude that the new system can save 89822 kw per year. It reflects energy-saving and environmental benefits of the cold and hot water air conditioning system.

Detachable clamps for minimal access surgery.

PubMed

Frank, T; Willetts, G J; Cuschieri, A

1995-01-01

A detachable clamp and applicator have been developed for use in minimal access surgical operations involving hollow visceral transection and anastomosis. The clamp has parallel jaws which ensure uniform distribution of the occlusive force. Following application on the bowel, the clamp is released from the applicator, thus freeing the access port. On completion of the anastomosis, the clamp is docked to the applicator, its jaws opened for release from the bowel and then closed prior to removal. The jaws of the clamp are kept closed by a pseudoelastic nickel-titanium (NiTi) alloy spring which imparts advantageous force characteristics when compared to stainless steel. The excellent holding and atraumatic characteristics of the detachable clamp have been confirmed by use in laparoscopic and thoracoscopic surgery on the gastrointestinal tract.

The numerical calculation of laminar boundary-layer separation

NASA Technical Reports Server (NTRS)

Klineberg, J. M.; Steger, J. L.

1974-01-01

Iterative finite-difference techniques are developed for integrating the boundary-layer equations, without approximation, through a region of reversed flow. The numerical procedures are used to calculate incompressible laminar separated flows and to investigate the conditions for regular behavior at the point of separation. Regular flows are shown to be characterized by an integrable saddle-type singularity that makes it difficult to obtain numerical solutions which pass continuously into the separated region. The singularity is removed and continuous solutions ensured by specifying the wall shear distribution and computing the pressure gradient as part of the solution. Calculated results are presented for several separated flows and the accuracy of the method is verified. A computer program listing and complete solution case are included.

Olodaterol Oral Inhalation

MedlinePlus

... not be all the way in the inhaler. Push the cartridge against a firm surface to ensure that it is correctly inserted. Do not remove the cartridge once it has been inserted into the inhaler. Put the clear base back into place. Do not remove the clear base ...

Image-guided removal of supratentorial cavernomas in critical brain areas: application of neuronavigation and intraoperative magnetic resonance imaging.

PubMed

Gralla, J; Ganslandt, O; Kober, H; Buchfelder, M; Fahlbusch, R; Nimsky, C

2003-04-01

In a retrospective study the postoperative results of 26 patients operated on for supratentorial cavernous hemangiomas either deep-seated or near eloquent brain areas are summarized. An exact surgical approach to these lesions is essential to prevent neurological deterioration. Three different navigation systems were used and compared according to their clinical applicability. Complete removal of the lesion was obtained in all patients of this series. In six cases (23 %) functional data from magnetoencephalography or functional magnetic resonance imaging were integrated into the navigational setup. In 14 cases (54 %) intraoperative magnetic resonance imaging was performed. The follow-up time was 3 - 26 months (mean: 10 months). In the postoperative course one patient (3.8 %) developed a hemiparesis, another one developed quadrantopia. Nineteen patients presented with preoperative seizure history, 16 of these (84 %) had no further or rare seizures after surgery. The better results in seizure control were achieved in those patients with shorter duration of seizure history before surgery. The study indicates that the application of neuronavigation allows surgery on supratentorial cavernous hemangiomas in critical brain areas with low morbidity. The intraoperative visualization of eloquent cortex areas by integration of functional data allows a fast identification and exemption of eloquent brain areas, preventing neurological deterioration. Furthermore, the intraoperative MR resection control ensures a complete resection and illustrates the minimal invasive approach.

A review of clinical and technical considerations for fixed and removable implant prostheses in the edentulous mandible.

PubMed

Zitzmann, Nicola Ursula; Marinello, Carlo Paolo

2002-01-01

The aim of the present article is to review some of the technical treatment options for implant prostheses restoring the edentulous mandible, mainly based on the Brånemark system. Clinical and technical aspects are discussed for the three established concepts: (1) implant-supported fixed prosthesis, (2) removable implant-supported overdenture, and (3) combined implant-retained and soft tissue-supported overdenture prosthesis. The framework of an implant-supported fixed screw-retained prosthesis can be processed in gold, Co-Cr alloy, or titanium with casting, laser-welding, or milling techniques. To improve the stability and retention of a conventional complete denture, one to four implants are indicated, and unsplinted (single attachments) or splinted designs (bar systems) can be applied. The design of the overdenture prosthesis must be carefully planned according to the requirements to ensure adequate stability and optimal form, contour, and esthetics, and the patient's best comfort. A large variety of different treatment modalities exist for both the fixed and removable mandibular implant prosthesis. Clinical and technical aspects should be considered at the beginning of the treatment to: (1) select the optimal implant position, (2) establish an adequate number of functional units, (3) select the appropriate retainers, and (4) apply the best technique for framework processing and veneering.

Extended Endoscopic Endonasal Approach for Craniopharyngioma Removal.

PubMed

Messerer, Mahmoud; Maduri, Rodolfo; Daniel, Roy Thomas

2018-02-01

Objective  Endoscopic transsphenoidal extended endoscopic approach (EEA) represents a valid alternative to microsurgery for craniopharyngiomas removal, especially for retrochiasmatic lesions without large parasellar extension. The present video illustrates the salient surgical steps of the EEA for craniopahryngioma removal. Patient  A 52-year-old man presented with a bitemporal hemianopia and a bilateral decreased visual acuity. MRI showed a Kassam type III cystic craniopharyngioma with a solid component ( Fig. 1 , panels A and B). Surgical Procedure  The head is rotated 10 degrees toward the surgeons. The nasal step is started through the left nostril with a middle turbinectomy. A nasoseptal flap is harvested and positioned in the left choana. The binostril approach allows a large sphenoidotomy to expose the key anatomic landmarks. The craniotomy boundaries are the planum sphenoidale superiorly, the median opticocarotid recesses, the internal carotid artery laterally and the clival recess inferiorly. After dural opening and superior intercavernous sinus coagulation, the tumor is entirely removed ( Fig. 2 , panels A and B). Skull base reconstruction is ensured by fascia lata grafting and nasoseptal flap positioning. Results  Postoperative MRI showed the complete tumor resection ( Fig. 1 , panels C and D). At 3 months postoperatively, the bitemporal hemianopia regressed and the visual acuity improved. A novel left homonymous hemianopia developed secondary to optic tract manipulation. Conclusions  The extended EEA is a valid surgical approach for craniopharyngioma resection. A comprehensive knowledge of the sellar and parasellar anatomy is mandatory for safe tumor removal with decreased morbidity and satisfactory oncologic results. The link to the video can be found at: https://youtu.be/NrCPPnVK2qA .

Proposal for a lunar landing pod for SKITTER

NASA Technical Reports Server (NTRS)

Herman, David; Huang, Frank; Morelli, Mark; Njaka, Chima; Pope, Michael; Rice, Michael

1987-01-01

The purpose of this project is to design a lunar landing module for the SKITTER vehicle. SKITTER is a three-legged mobile lunar transport and work platform. This lunar landing module must be able to bring SKITTER, with attached crane, from a lunar orbit to the surface of the Moon. This propulsion system is entirely self-contained and removable after touchdown. SKITTER is unmanned and must be able to touch down on the lunar surface and perform assigned tasks independently of other space or lunar vehicles. The propulsion system is designed to ensure that the vehicle will make a lunar landing within the expected velocity range. A landing gear configuration is presented to safely dissipate landing forces on lunar impact and be removed from the SKITTER structure after touchdown. The overall engineering analysis was conducted to determine an economical design to land SKITTER safely on the Moon. SKITTER will perform various tasks on the surface of the Moon. The completion of this project will determine the feasibility of landing SKITTER with the attached crane safely on the lunar surface.

Analysis of Percent On-Cell Reformation of Methane in SOFC Stacks: Thermal, Electrical and Stress Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Recknagle, Kurtis P.; Yokuda, Satoru T.; Jarboe, Daniel T.

2006-04-07

This report summarizes a parametric analysis performed to determine the effect of varying the percent on-cell reformation (OCR) of methane on the thermal and electrical performance for a generic, planar solid oxide fuel cell (SOFC) stack design. OCR of methane can be beneficial to an SOFC stack because the reaction (steam-methane reformation) is endothermic and can remove excess heat generated by the electrochemical reactions directly from the cell. The heat removed is proportional to the amount of methane reformed on the cell. Methane can be partially pre-reformed externally, then supplied to the stack, where rapid reaction kinetics on the anodemore » ensures complete conversion. Thus, the thermal load varies with methane concentration entering the stack, as does the coupled scalar distributions, including the temperature and electrical current density. The endotherm due to the reformation reaction can cause a temperature depression on the anode near the fuel inlet, resulting in large thermal gradients. This effect depends on factors that include methane concentration, local temperature, and stack geometry.« less

Cycle time and cost reduction in large-size optics production

NASA Astrophysics Data System (ADS)

Hallock, Bob; Shorey, Aric; Courtney, Tom

2005-09-01

Optical fabrication process steps have remained largely unchanged for decades. Raw glass blanks have been rough-machined, generated to near net shape, loose abrasive or fine bound diamond ground and then polished. This set of processes is sequential and each subsequent operation removes the damage and micro cracking induced by the prior operational step. One of the long-lead aspects of this process has been the glass polishing. Primarily, this has been driven by the need to remove relatively large volumes of glass material compared to the polishing removal rate to ensure complete damage removal. The secondary time driver has been poor convergence to final figure and the corresponding polish-metrology cycles. The overall cycle time and resultant cost due to labor, equipment utilization and shop efficiency is increased, often significantly, when the optical prescription is aspheric. In addition to the long polishing cycle times, the duration of the polishing time is often very difficult to predict given that current polishing processes are not deterministic processes. This paper will describe a novel approach to large optics finishing, relying on several innovative technologies to be presented and illustrated through a variety of examples. The cycle time reductions enabled by this approach promises to result in significant cost and lead-time reductions for large size optics. In addition, corresponding increases in throughput will provide for less capital expenditure per square meter of optic produced. This process, comparative cycles time estimates and preliminary results will be discussed.

Strategy to Ensure Institutional Control Implementation at Superfund Sites

EPA Pesticide Factsheets

This document sets forth EPA’s strategy (Strategy) for ensuring that institutional controls (ICs) are successfully implemented at Superfund sites, with an emphasis on evaluating ICs at sites where all construction of all remedies is complete (construction complete sites).

Extensive Nevus Comedonicus, Complicated with Recurrent Abscesses, Successfully Treated with Surgical Resurfacing.

PubMed

Manikavachakan, Narender; Siddaraju, Maheshwari Nallur; Rajendran, Sarangapani Chakrapani; Venkataraman, Aniketh

2018-01-01

Nevus comedonicus is a rare epidermal abnormality of the pilosebaceous unit, which is congenital in most patients but may also appear early in childhood. It may be localized or have an extensive involvement, the latter showing a unilateral predominance with only a few cases presenting bilaterally. Extensive nevus comedonicus can be associated with musculoskeletal defects, eye and neurological involvement, which constitutes nevus comedonicus syndrome. Uncomplicated nevus comedonicus can be treated with topical keratolytics, diode, erbium laser, and ultrapulse CO 2 laser. Surgical excision can be performed to ensure complete removal and nonrecurrence. This case report refers to a young male patient with extensive nevus comedonicus present over left chest, left axilla, and left upper back without systemic involvement, treated with staged surgical excision and resurfacing.

On-orbit Performance and Calibration of the HMI Instrument

NASA Astrophysics Data System (ADS)

Hoeksema, J. Todd; Bush, Rock; HMI Calibration Team

2016-10-01

The Helioseismic and Magnetic Imager (HMI) on the Solar Dynamics Observatory (SDO) has observed the Sun almost continuously since the completion of commissioning in May 2010, returning more than 100,000,000 filtergrams from geosynchronous orbit. Diligent and exhaustive monitoring of the instrument's performance ensures that HMI functions properly and allows proper calibration of the full-disk images and processing of the HMI observables. We constantly monitor trends in temperature, pointing, mechanism behavior, and software errors. Cosmic ray contamination is detected and bad pixels are removed from each image. Routine calibration sequences and occasional special observing programs are used to measure the instrument focus, distortion, scattered light, filter profiles, throughput, and detector characteristics. That information is used to optimize instrument performance and adjust calibration of filtergrams and observables.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dowell, Jonathan; Franco, Joe

The discussion of Hanford's River Corridor will cover work that has already been completed plus the work remaining to be done. This includes the buildings, waste sites, and groundwater plumes in the 300 Area; large-scale burial ground remediation in the 600 Area; plutonium production reactor dismantling and 'cocooning' along the river; preservation of the world's first full-scale plutonium production reactor; removal of more than 14 million tons of contaminated soil and debris along the Columbia River shoreline and throughout the River Corridor; and the excavation of buried waste sites in the river shore area. It also includes operating an EPA-permittedmore » low-level waste disposal facility in the central portion of the site. At the completions of cleanup in 2015, Hanford's River Corridor will be the largest closure project ever completed by the Department of Energy. Cleanup of the River Corridor has been one of Hanford's top priorities since the early 1990's. This urgency has been due to the proximity of hundreds of waste sites to the Columbia River. In addition, removal of the sludge from K West Basin, near the river, remains a high priority. This 220-square-mile area of the Hanford Site sits on the edge of the last free-flowing stretch of the Columbia River. The River Corridor portion of the Hanford Site includes the 100 and 300 Areas along the south shore of the Columbia River. The 100 Areas contain nine retired plutonium production reactors. These areas are also the location of numerous support facilities and solid and liquid waste disposal sites that have contaminated groundwater and soil. The 300 Area, located just north of the city of Richland, contains fuel fabrication facilities, nuclear research and development facilities, and their associated solid and liquid waste disposal sites that have contaminated groundwater and soil. In order to ensure that cleanup actions address all threats to human health and the environment, the River Corridor includes the adjacent areas that extend from the 100 Area and 300 Area to the Central Plateau. For sites in the River Corridor, remedial actions are expected to restore groundwater to drinking water standards and ensure that aquatic life in the Columbia River is protected by achieving ambient water quality standards. It is intended that these objectives be achieved, unless technically impracticable, within a reasonable timeframe. In those instances where remedial action objectives are not achievable in a reasonable time frame, or are determined to be technically impracticable, programs are being implemented to contain the plume, prevent exposure to contaminated groundwater, and evaluate further risk reduction opportunities as new technologies become available. River Corridor cleanup work also removes potential sources of contamination, which are close to the Columbia River, and places them on the Central Plateau for final disposal. The intent is to shrink the footprint of active cleanup to within the 75-square- mile area of the Central Plateau by removing excess facilities and remediating waste sites. Cleanup actions are supporting anticipated future land uses consistent with the Hanford Reach National Monument, where applicable, and the Hanford Comprehensive Land- Use Plan (DOE 1999). The River Corridor has been divided into six geographic decision areas to achieve source and groundwater remedy decisions. These decisions will provide comprehensive coverage for all areas within the River Corridor and will incorporate ongoing interim action cleanup activities. Cleanup levels will be achieved in order to support anticipated future land uses of conservation and preservation for most of this area and industrial use for the 300 Area. At the conclusion of cleanup actions, the federal government will implement long-term stewardship activities to ensure protection of human health and the environment. (authors)« less

[Identification and analysis of Corydalis boweri, Meconopsis horridula and their close related species of the same genus by using ITS2 DNA barcode].

PubMed

Dou, Rong-kun; Bi, Zhen-fei; Bai, Rui-xue; Ren, Yao-yao; Tan, Rui; Song, Liang-ke; Li, Di-qiang; Mao, Can-quan

2015-04-01

The study is aimed to ensure the quality and safety of medicinal plants by using ITS2 DNA barcode technology to identify Corydalis boweri, Meconopsis horridula and their close related species. The DNA of 13 herb samples including C. boweri and M. horridula from Lhasa of Tibet was extracted, ITS PCR were amplified and sequenced. Both assembled and web downloaded 71 ITS2 sequences were removed of 5. 8S and 28S. Multiple sequence alignment was completed and the intraspecific and interspecific genetic distances were calculated by MEGA 5.0, while the neighbor-joining phylogenetic trees were constructed. We also predicted the ITS2 secondary structure of C. boweri, M. horridula and their close related species. The results showed that ITS2 as DNA barcode was able to identify C. boweri, M. horridula as well as well as their close related species effectively. The established based on ITS2 barcode method provides the regular and safe detection technology for identification of C. boweri, M. horridula and their close related species, adulterants and counterfeits, in order to ensure their quality control, safe medication, reasonable development and utilization.

Counter-Intelligence as a Chaotic Phenomenon and Its Importance in National Security

NASA Astrophysics Data System (ADS)

Kuloğlu, Gökhan; Gül, Zakir; Erçetin, Şefika Şule

In today's rapidly changing globalized world, remarkably fast and important developments have been faced in the area of national security as in almost all other areas. Advancements in communication and transportation technologies have removed physical boundaries almost completely. National security institutions now have to fight against new and complicated security threats that go beyond the boundaries such as organized crimes and terror crimes. These ever-changing threats and dangerous environment which become more and more complex every single day force nations to review their current security structures and to take new and effective measures in the required areas in order to ensure their national security. As a matter of fact, counter-intelligence, which was quite important due to the frequency of spying acts during the Cold War but lost its importance after the Cold War had ended, has been one of these measures. Today, counterintelligence has once again become one of the most important functions in the fight against national security threats with changing dimensions. It is only possible for a nation to ensure its national security fully by having not only a defensive and passive approach but also offensive counter-intelligence.

Honey Lake Power Facility under construction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1988-12-01

Geothermal energy and wood waste are primary energy sources for the 30 megawatt, net, Honey Lake Power Facility, a cogeneration power plant. The facility 60% completed in January 1989, will use 1,300 tons per day of fuel obtained from selective forest thinnings and from logging residue combined with mill wastes. The power plant will be the largest industrial facility to use some of Lassen County's geothermal resources. The facility will produce 236 million kilowatt-hours of electricity annually. The plant consists of a wood-fired traveling grate furnace with a utility-type high pressure boiler. Fluids from a geothermal well will pass throughmore » a heat exchange to preheat boiler feedwater. Used geothermal fluid will be disposed of in an injection well. Steam will be converted to electrical power through a 35.5-megawatt turbine generator and transmitted 22 miles to Susanville over company-owned and maintained transmission lines. The plant includes pollution control for particulate removal, ammonia injection for removal of nitrogen oxides, and computer-controlled combustion systems to control carbon monoxide and hydrocarbons. The highly automated wood yard consists of systems to remove metal, handle oversized material, receive up to six truck loads of wood products per hour, and continuously deliver 58 tons per hour of fuel through redundant systems to ensure maximum on-line performance. The plant is scheduled to become operational in mid-1989.« less

Fabrication of an interim complete removable dental prosthesis with an in-office digital light processing three-dimensional printer: A proof-of-concept technique.

PubMed

Lin, Wei-Shao; Harris, Bryan T; Pellerito, John; Morton, Dean

2018-04-30

This report describes a proof of concept for fabricating an interim complete removable dental prosthesis with a digital light processing 3-dimensional (3D) printer. Although an in-office 3D printer can reduce the overall production cost for an interim complete removable dental prosthesis, the process has not been validated with clinical studies. This report provided a preliminary proof of concept in developing a digital workflow for the in-office additively manufactured interim complete removable dental prosthesis. Copyright © 2018 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

33 CFR 154.1228 - Methods of ensuring the availability of response resources by contract or other approved means.

Code of Federal Regulations, 2011 CFR

2011-07-01

... TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Animal Fats and Vegetable Oils Facilities... following methods: (1) The identification of an oil spill removal organization with specified equipment and... personnel, equipment, and services capable of being provided by the oil spill removal organization within...

33 CFR 154.1228 - Methods of ensuring the availability of response resources by contract or other approved means.

Code of Federal Regulations, 2010 CFR

2010-07-01

... TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Animal Fats and Vegetable Oils Facilities... following methods: (1) The identification of an oil spill removal organization with specified equipment and... personnel, equipment, and services capable of being provided by the oil spill removal organization within...

Serrated Colon Polyps as Precursors to Colorectal Cancer

PubMed Central

Sweetser, Seth; Smyrk, Thomas C.; Sinicrope, Frank A.

2013-01-01

Identification of the serrated neoplasia pathway has improved our understanding of the pathogenesis of colorectal cancer (CRC). Insights have included an increased recognition of the malignant potential of different types of serrated polyps, such as sessile and traditional serrated adenomas. Sessile serrated adenomas share molecular features with colon tumors, such as microsatellite instability and a methylator phenotype, indicating that these lesions are precursors that progress via the serrated neoplasia pathway. There is evidence that the serrated pathway contributes to interval or missed cancers. These data have important implications for clinical practice and CRC prevention, since hyperplastic polyps were previously regarded as having no malignant potential. Endoscopic detection of serrated polyps is a challenge because they are often inconspicuous with indistinct margins, and are frequently covered by adherent mucus. It is important for gastroenterologists to recognize the subtle endoscopic features of serrated polyps, which would facilitate their detection and removal, to ensure a high-quality colonoscopy examination. Recognition of the role of serrated polyps in colon carcinogenesis has led to the inclusion of these lesions in post-polypectomy surveillance guidelines. However, an enhanced effort is needed to identify and completely remove serrated adenomas, with the goal of increasing the effectiveness of colonoscopy to reduce CRC incidence. PMID:23267866

Task Force on Defense Strategies for Ensuring the Resilience of National Space Capabilities. Executive Summary

DTIC Science & Technology

2017-03-21

March 2017 Task Force on Defense Strategies for Ensuring the Resilience of National Space Capabilities OFFICE OF THE UNDER SECRETARY OF...the Department of Defense. The DSB Task Force on Defense Strategies for Ensuring the Resilience of National Space Capabilities completed its formal...Ensuring the Resilience of National Space Capabilities | i DSB Task Force on Defense Strategies for Ensuring the

Evaluation of the rate of decompression in anterior cervical corpectomy using an intra-operative computerized tomography scan (O-Arm system).

PubMed

Costa, Francesco; Tomei, Massimo; Sassi, Marco; Cardia, Andrea; Ortolina, Alessandro; Servello, Domenico; Fornari, Maurizio

2012-02-01

The purpose of this study was to evaluate the efficacy of intra-operative computerized tomography (CT) scanning in the analysis of bone removal accuracy during anterior cervical corpectomy, in order to allow any necessary immediate correction in the event of inadequate bone removal. From September 2009 to December 2010 we performed an intra-operative (CT) scan using the O-Arm(™) Image system to assess the rate of central and lateral decompression in all patients treated for cervical spondylotic myelopathy by anterior cervical corpectomy and fusion. Out of a population of 187 patients admitted to our department, with a diagnosis of myelopathy due to spondylotic degenerative cervical stenosis, 15 patients underwent a surgical treatment with anterior cervical corpectomy and fusion. There were nine males (60%) and six females (40%); the mean age was 52.4 years, ranging from 41 to 57 years. The pre-operative radiologic investigations (MRI and CT scans) revealed in the nine patients (60%) the extent of the compression to one vertebral body (C4 one case, C5 four cases, C6 four cases), while in the six cases (40%) the compression regarded two vertebral body (C3 and C4 one case, C4 and C5 two cases, C5 and C6 three cases). During surgery, when the decompression was judged completely, a CT scan was performed: in 11 cases (73.3%) the decompression was considered adequate, while in four cases (26.7%) it was deemed insufficient and the surgical strategy was changed in order to optimize the bone removal. In these cases an additional scan was taken to prove the efficacy of decompression, achieved in all patients. Intra-operative CT scan performed during cervical corpectomy is a really useful tool in helping to ensure complete bone removal and the adequacy of surgery. The O-arm(™) Image system grants optimal image quality, allowing correctly assessing the rate of decompression and, in any case of doubt, allows an intra-operative evaluation of the final correct positioning of the graft.

Holder For Shot Peening

NASA Technical Reports Server (NTRS)

Coker, Bill E.

1988-01-01

Fixture delimits peened area precisely while boosting productivity. New fixture ensures small tolerances essential for turbine blades. Opens and closes quickly so finished part removed and new part inserted.

PUREX/UO{sub 3} deactivation project management plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Washenfelder, D.J.

1993-12-01

From 1955 through 1990, the Plutonium-Uranium Extraction Plant (PUREX) provided the United States Department of Energy Hanford Site with nuclear fuel reprocessing capability. It operated in sequence with the Uranium Trioxide (UO{sub 3}) Plant, which converted the PUREX liquid uranium nitrate product to solid UO{sub 3} powder. Final UO{sub 3} Plant operation ended in 1993. In December 1992, planning was initiated for the deactivation of PUREX and UO{sub 3} Plant. The objective of deactivation planning was to identify the activities needed to establish a passively safe, environmentally secure configuration at both plants, and ensure that the configuration could be retainedmore » during the post-deactivation period. The PUREX/UO{sub 3} Deactivation Project management plan represents completion of the planning efforts. It presents the deactivation approach to be used for the two plants, and the supporting technical, cost, and schedule baselines. Deactivation activities concentrate on removal, reduction, and stabilization of the radioactive and chemical materials remaining at the plants, and the shutdown of the utilities and effluents. When deactivation is completed, the two plants will be left unoccupied and locked, pending eventual decontamination and decommissioning. Deactivation is expected to cost $233.8 million, require 5 years to complete, and yield $36 million in annual surveillance and maintenance cost savings.« less

Effects of midstory removal on underplanted black oak and white oak in the western Cumberland Plateau

Treesearch

David L. Parrott; John M. Lhotka; Jeffrey W. Stringer

2011-01-01

Difficulties in successful oak regeneration have led to the examination of various techniques to increase oak recruitment. To ensure sufficient regeneration, oak seedlings can be underplanted and used in conjunction with intermediate treatments, such as midstory removal, that create a light environment favorable to oak advance reproduction. This study examines the 5-...

High rejection reverse osmosis membrane for removal of N-nitrosamines and their precursors.

PubMed

Fujioka, Takahiro; Ishida, Kenneth P; Shintani, Takuji; Kodamatani, Hitoshi

2017-12-12

Direct potable reuse is becoming a feasible option to cope with water shortages. It requires more stringent water quality assurance than indirect potable reuse. Thus, the development of a high-rejection reverse osmosis (RO) membrane for the removal of one of the most challenging chemicals in potable reuse - N-nitrosodimethylamine (NDMA) - ensures further system confidence in reclaimed water quality. This study aimed to achieve over 90% removal of NDMA by modifying three commercial and one prototype RO membrane using heat treatment. Application of heat treatment to a prototype membrane resulted in a record high removal of 92% (1.1-log) of NDMA. Heat treatment reduced conductivity rejection and permeability, while secondary amines, selected as N-nitrosamine precursors, were still well rejected (>98%) regardless of RO membrane type. This study also demonstrated the highly stable separation performance of the heat-treated prototype membrane under conditions of varying feed temperature and permeate flux. Fouling propensity of the prototype membrane was lower than a commercial RO membrane. This study identified a need to develop highly selective RO membranes with high permeability to ensure the feasibility of using these membranes at full scale. Copyright © 2017 Elsevier Ltd. All rights reserved.

Partial caries removal may have advantages but limited evidence on restoration survival.

PubMed

Manton, David

2013-09-01

Cochrane Oral Health Group's Trials Register, CENTRAL, Medline via OVID, EMBASE via OVID; no restrictions on language or date of publication. Parallel group and split mouth randomised and quasi-randomised controlled trials comparing stepwise, partial and no dentinal caries removal with complete caries removal in unrestored primary and permanent teeth were included in this review. Title and abstract screening was by two reviewers, with disagreements resolved by a third. Full texts of eligible studies were assessed by the team until consensus, and data extraction was by three reviewers independently and in triplicate. Two reviewers assessed risk of bias. Trial authors were contacted where possible . Eight trials (all assessed as high risk of bias) with 934 participants and 1372 teeth were included in this updated review (Previously complete or ultraconservative removal of decayed tissue in unfilled teeth, Ricketts, 2006) with four new trials being included. There were a number of different comparisons in the trials (stepwise or partial or no dentinal caries removal compared to complete caries removal) with one study including more than one of these comparisons. Four studies investigated primary teeth, three permanent teeth and one included both.For stepwise caries removal, (four studies), there was a 56% reduction in incidence of pulp exposure (RR 0.44, 95% CI 0.33 to 0.60, P < 0.00001) compared to complete caries removal. The mean pulp exposure incidence was 34.7% in the complete caries removal group and 15.4% in the stepwise groups. There was no difference in signs and symptoms of pulp disease (RR 0.78, 95% CI 0.39 to 1.58, P = 0.50).In the two partial caries removal studies, the incidence of pulp exposure reduction was 77% for the partial caries removal group (RR 0.23, 95% CI 0.08 to 0.69, P = 0.009) with a mean pulp exposure incidence of 21.9% in the complete caries removal groups and 5% in the partial caries removal groups. There was insufficient evidence to determine whether or not there was a difference in signs and symptoms of pulp disease (RR 0.27, 95% CI 0.05 to 1.60, P = 0.15), or restoration failure (one study showing no difference and another study showing no failures in either group).There were two very different studies which looked at no dentinal caries removal compared to complete caries removal. There was some evidence of no difference between these techniques for the outcome of signs and symptoms of pulp disease and reduced risk of restoration failure, favouring no dentinal caries removal, from one study. There were no instances of pulp disease or restoration failure in either group from the second study. Meta-analysis of these two studies was not carried out because of the substantial clinical differences between the studies. For management of dentinal caries, both stepwise and partial excavation showed clinical advantage over complete caries removal by reducing the incidence of pulp exposure in symptomless, vital, carious primary as well as permanent teeth. The review found no difference in signs or symptoms of pulpal disease between stepwise excavation and complete caries removal.There was insufficient evidence to determine whether there was a difference in signs and symptoms of pulp disease or a difference in the risk of restoration failure with partial caries removal.For the two no dentinal caries removal studies, the one investigating permanent teeth found no difference in restoration failure and the one investigating primary teeth found a statistically significant difference in restoration failure favouring the intervention.Due to the short term follow-up, low reporting of patient centred outcomes and high risk of bias, further high quality, long-term clinical trials are still required to assess the most effective intervention.

Postconstruction report for the mercury tanks interim action at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Voskuil, T.L.

1993-09-01

Three underground concrete settling tanks (tanks 2101-U, 2104-U, and 2100-U) at the Y-12 Plant on the Oak Ridge Reservation in Oak Ridge, Tennessee, contained contaminated sludges contributing mercury to the Upper East Fork Poplar Creek (UEFPC). These tanks were cleaned out as an interim action under the Comprehensive Environmental Response, Compensation, and Liability Act as part of the Reduction of Mercury in Plant Effluent subproject. Cleaning out these tanks prevented the sludge that had settled in the bottom from resuspending and carrying mercury into UEFPC. Tanks 2104-U and 2100-U were returned to service and will continue to receive effluent frommore » buildings 9201-4 and 9201-5. Tank 2101-U had been abandoned and its effluent redirected to Tank 2100-U during previous activities. This interim action permanently sealed Tank 2101-U from the storm sewer system. Upon removal of materials and completion of cleanup, inspections determined that the project`s cleanup criteria had been met. The structural integrity of the tanks was also inspected, and minor cracks identified in tanks 2101-U and 2104-U were repaired. This project is considered to have been completed successfully because it met its performance objectives as addressed in the Interim Record of Decision and the work plan: to remove the waste from the three storage tanks; to ensure that the tanks were cleaned to the levels specified; to return tanks 2100-U and 2104-U to service; to isolate Tank 2101-U permanently; and to manage the wastes in an appropriate fashion.« less

Optimization of urban wastewater treatment plants process with low C/N ratio

NASA Astrophysics Data System (ADS)

Zheng, L.; Xu, G. M.; Chen, J.; Chen, B.; Lv, Z.; Yang, Y. A.

2016-08-01

In southern China, the inflow of water to wastewater treatment plants has a lower concentration of organic matter. This causes treatment plants to face issues in the denitrification and phosphorus removal processes such as deficient carbon sources, high energy consumption, and unstable nitrogen removal. To resolve these issues, we propose the reconstruction of the internal reflux port, improvement of the internal reflux ratio to 200%, the addition of carbon source to anoxic zone, and the addition of phosphorus removal agents in secondary settling tank. The results of study show significantly improved efficiency of nitrogen and phosphorus removal, which ensures the stability of subsequent supply of reused water.

Sonophotocatalytic degradation of dye C.I. Acid Orange 7 by TiO2 and Ag nanoparticles immobilized on corona pretreated polypropylene non-woven fabric.

PubMed

Marković, Darka; Šaponjić, Zoran; Radoičić, Marija; Radetić, Tamara; Vodnik, Vesna; Potkonjak, Branislav; Radetić, Maja

2015-05-01

This study discusses the possibility of using corona pre-treated polypropylene (PP) non-woven fabric as a support for immobilization of colloidal TiO2 and Ag nanoparticles in order to remove dye C.I. Acid Orange 7 from aqueous solution. Dye removal efficiency by sonocatalysis, photocatalysis and sonophotocatalysis was evaluated on corona pre-treated fabric loaded with TiO2 nanoparticles, corona pre-treated fabric double loaded with TiO2 nanoparticles and corona pre-treated fabrics loaded with TiO2 nanoparticles before and after deposition of Ag nanoparticles. In addition, the stability of PP non-woven fabric during these processes was investigated. The substrates were characterized by SEM, EDX and AAS analyses. The change of the dye concentration was evaluated by UV-VIS spectrophotometry. Unlike sonocatalysis and photocatalysis, complete dye removal from both solution and non-woven fabric was obtained already after 240-270 min of sonophotocatalysis. Corona pre-treated PP non-woven fabric loaded with Ag nanoparticles prior to deposition of TiO2 nanoparticles provided excellent degradation efficiency and superior reusability. Sonophotocatalytic degradation of dye in the presence of all investigated samples was the most prominent in acidic conditions. Although this nanocomposite system ensured fast discoloration of dye solution, TOC values of water measured after sonophotocatalysis were not satisfactory because of PP degradation. Therefore, it is suggested to include TOC evaluation in each case study where different supports for TiO2 nanoparticles are used since these nanoparticles may guarantee the dye removal from solution but the stability of support could be problematic causing even more serious environmental impact. Copyright © 2014 Elsevier B.V. All rights reserved.

Shock waves: a new physical principle in medicine.

PubMed

Brendel, W

1986-01-01

Shock wave therapy of kidney- and gallstones, i.e. extracorporeal shock wave lithotripsy (ESWL), is a new, noninvasive technique to destroy concrements in the kidney, the gallbladder and in the ductus choledochus. This method was developed by the Dornier Company, Friedrichshafen, FRG, and tested in animal experiments at the Institute for Surgical Research of the University of Munich. In the meantime, kidney lithotripsy has gained world-wide acceptance. More than 60,000 patients suffering from urolithiasis have been treated successfully, what made surgical removal of their kidney stones obsolete. Gallstone lithotripsy is, however, still at the very beginning of clinical trial. Lithotripsy of gallbladder stones will have to be applied in combination with urso- or chenodesoxycholic acid in order to obtain complete dissolution of the fragments. Potential hazards to living tissues are briefly mentioned. Since the lung is particularly susceptible, shock waves must enter the body at an angle which ensures that lung tissue is not affected.

Modeling and Control of a Fixed Wing Tilt-Rotor Tri-Copter

NASA Astrophysics Data System (ADS)

Summers, Alexander

The following thesis considers modeling and control of a fixed wing tilt-rotor tri-copter. An emphasis of the conceptual design is made toward payload transport. Aerodynamic panel code and CAD design provide the base aerodynamic, geometric, mass, and inertia properties. A set of non-linear dynamics are created considering gravity, aerodynamics in vertical takeoff and landing (VTOL) and forward flight, and propulsion applied to a three degree of freedom system. A transition strategy, that removes trajectory planning by means of scheduled inputs, is theorized. Three discrete controllers, utilizing separate control techniques, are applied to ensure stability in the aerodynamic regions of VTOL, transition, and forward flight. The controller techniques include linear quadratic regulation, full state integral action, gain scheduling, and proportional integral derivative (PID) flight control. Simulation of the model control system for flight from forward to backward transition is completed with mass and center of gravity variation.

A one-year practice-based learning programme for new general practice nurses in Scotland: evaluation of the pilot.

PubMed

Wakeling, Judy; Ferguson, Julie; Kennedy, Susan

2016-01-01

This paper summarises the evaluation of a pilot programme introduced by NHS Education for Scotland to provide education and skills training for nurses new to general practice. The programme was developed through extensive consultation with existing general practice nurses and was educationally accredited by the Royal College of General Practitioners and the Royal College of Nursing in 2013. Twelve nurses embarked upon the programme 2012-2013 and nine completed it. The programme was extensively evaluated through questionnaires (with supervisors, practice staff and participants), analysis of programme documentation and interviews with participants. Based on the evaluation feedback, alterations have been made to subsequent deliveries of the programme. These include removing some topic areas and lengthening the programme by three months. The programme continues to be successfully delivered and evaluation is ongoing to ensure it continues to meet nurses' needs.

[Impurity removal technology of Tongan injection in liquid preparation process].

PubMed

Yang, Xu-fang; Wang, Xiu-hai; Bai, Wei-rong; Kang, Xiao-dong; Liu, Jun-chao; Wu, Yun; Xiao, Wei

2015-08-01

In order to effectively remove the invalid impurities in Tongan injection, optimize the optimal parameters of the impurity removal technology of liquid mixing process, in this paper, taking Tongan injection as the research object, with the contents of celandine alkali, and sinomenine, solids reduction efficiency, and related substances inspection as the evaluation indexes, the removal of impurities and related substances by the combined process of refrigeration, coction and activated carbon adsorption were investigated, the feasibility of the impurity removal method was definited and the process parameters were optimized. The optimized process parameters were as follows: refrigerated for 36 h, boiled for 15 min, activated carbon dosage of 0.3%, temperature 100 degrees C, adsorption time 10 min. It can effectively remove the tannin, and other impurities, thus ensure the quality and safety of products.

[Ensure - complete and balanced nutrition, convenient on work].

PubMed

Kurenkov, A V; Iuriatin, A A

2013-01-01

The work conditions often may compromise a company ability to supply their employees with adequate, hot meals. For heavy labor workers and some office employees it is important to restore energy and nutrients with food, balanced in nutrients. The lack of adequate nutritive support can give a negative impact on different organs functions. One of the main principles of healthy nutrition is - diet must be balanced in nutrients. Which is easy to say, but difficult to implement, especially on some industries. Complete and balanced liquid and ready-to-use nutrition is new trend in nutrition of healthy people who cannot consume optimal diet, and in people with the risk of nutrient deficiencies. One-two packs of Ensure daily can significantly improve a worker ration. 2 and more packs could serve as a real complete and balanced lunch (>or=780 kcal). Also Ensure is easy to store and to deliver in distant places of work and can be recommended for use as a convenient, complete and balanced nutrition on work.

30 CFR 817.102 - Backfilling and grading: General requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... terrain if the following requirements are met: (1) All vegetative and organic material shall be removed... to conserve soil moisture, ensure stability, and control erosion on final-graded slopes, if the...

30 CFR 817.102 - Backfilling and grading: General requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... terrain if the following requirements are met: (1) All vegetative and organic material shall be removed... to conserve soil moisture, ensure stability, and control erosion on final-graded slopes, if the...

30 CFR 817.102 - Backfilling and grading: General requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... terrain if the following requirements are met: (1) All vegetative and organic material shall be removed... to conserve soil moisture, ensure stability, and control erosion on final-graded slopes, if the...

30 CFR 817.102 - Backfilling and grading: General requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... terrain if the following requirements are met: (1) All vegetative and organic material shall be removed... to conserve soil moisture, ensure stability, and control erosion on final-graded slopes, if the...

30 CFR 817.102 - Backfilling and grading: General requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... terrain if the following requirements are met: (1) All vegetative and organic material shall be removed... to conserve soil moisture, ensure stability, and control erosion on final-graded slopes, if the...

Wastewater treatment with submerged fixed bed biofilm reactor systems--design rules, operating experiences and ongoing developments.

PubMed

Schlegel, S; Koeser, H

2007-01-01

Wastewater treatment systems using bio-films that grow attached to a support media are an alternative to the widely used suspended growth activated sludge process. Different fixed growth biofilm reactors are commercially used for the treatment of municipal as well as industrial wastewater. In this paper a fairly new fixed growth biofilm system, the submerged fixed bed biofilm reactor (SFBBR), is discussed. SFBBRs are based on aerated submerged fixed open structured plastic media for the support of the biofilm. They are generally operated without sludge recirculation in order to avoid clogging of the support media and problems with the control of the biofilm. Reactor and process design considerations for these reactors are reviewed. Measures to ensure the development and maintenance of an active biofilm are examined. SFBBRs have been applied successfully to small wastewater treatment plants where complete nitrification but no high degree of denitrification is necessary. For the pre-treatment of industrial wastewater the use of SFBBRs is advantageous, especially in cases of wastewater with high organic loading or high content of compounds with low biodegradability. Performance data from exemplary commercial plants are given. Ongoing research and development efforts aim at achieving a high simultaneous total nitrogen (TN) removal of aerated SFBBRs and at improving the efficiency of TN removal in anoxic SFBBRs.

Use of materials derived from cattle in human food and cosmetics; reopening of the comment period. Interim final rule; reopening of the comment period.

PubMed

2013-03-04

The Food and Drug Administration (FDA or ``we'') is reopening the comment period for the interim final rule entitled "Use of Materials Derived From Cattle in Human Food and Cosmetics'' that published in the Federal Register of July 14, 2004 (69 FR 42256). The interim final rule prohibited the use of certain cattle material to address the potential risk of bovine spongiform encephalopathy (BSE) in human food, including dietary supplements, and cosmetics. In the Federal Register of September 7, 2005 (70 FR 53063), we amended the interim final rule to make changes, including providing that the small intestine of cattle, formerly prohibited cattle material, could be used in human food and cosmetics if the distal ileum was removed by a specified procedure or one that the establishment could demonstrate is equally effective in ensuring complete removal of the distal ileum. Since 2005, peer-reviewed studies have been published showing the presence of infectivity in the proximal ileum, jejunum, ileocecal junction, and colon of cattle with BSE. Therefore, we are reopening the comment period for the interim final rule to give interested parties an opportunity to comment on the new studies concerning infectivity in parts of the small intestine other than the distal ileum.

Ensuring the availability of the nursing workforce through philanthropy: a case study.

PubMed

Bolton, Linda Burnes; Swanson, Jane; Zamora, Elizabeth

2014-01-01

The Institute of Medicine report on the Future of Nursing identified the need to increase the preparation of nurses, create pathways for nurses to lead as partners to improve health by promoting interprofessional education and practice, and to remove barriers to full practice of nurses across the continuum. This case study shares the experience of large systems and their creativity using philanthropy in their quest to ensure the availability of a qualified nursing workforce.

Direct electroplating of copper on tantalum from ionic liquids in high vacuum: origin of the tantalum oxide layer.

PubMed

Schaltin, Stijn; D'Urzo, Lucia; Zhao, Qiang; Vantomme, André; Plank, Harald; Kothleitner, Gerald; Gspan, Christian; Binnemans, Koen; Fransaer, Jan

2012-10-21

In this paper, it is shown that high vacuum conditions are not sufficient to completely remove water and oxygen from the ionic liquid 1-ethyl-3-methylimidazolium chloride. Complete removal of water demands heating above 150 °C under reduced pressure, as proven by Nuclear Reaction Analysis (NRA). Dissolved oxygen gas can only be removed by the use of an oxygen scavenger such as hydroquinone, despite the fact that calculations show that oxygen should be removed completely by the applied vacuum conditions. After applying a strict drying procedure and scavenging of molecular oxygen, it was possible to deposit copper directly on tantalum without the presence of an intervening oxide layer.

Selective removal of carious human dentin using a nanosecond pulsed laser operating at a wavelength of 5.85 μ m

NASA Astrophysics Data System (ADS)

Ishii, Katsunori; Kita, Tetsuya; Yoshikawa, Kazushi; Yasuo, Kenzo; Yamamoto, Kazuyo; Awazu, Kunio

2015-05-01

Less invasive methods for treating dental caries are strongly desired. However, conventional dental lasers do not always selectively remove caries or ensure good bonding to the composite resin. According to our previous study, demineralized dentin might be removed by a nanosecond pulsed laser operating at wavelengths of around 5.8 μm. The present study investigated the irradiation effect of the light on carious human dentin classified into "remove," "not remove," and "unclear" categories. Under 5.85-μm laser pulses, at average power densities of 30 W/cm2 and irradiation time of 2 s, the ablation depth of "remove" and "not remove," and also the ablation depth of "unclear" and "not remove," were significantly different (p<0.01). The ablation depth was correlated with both Vickers hardness and Ca content. Thus, a nanosecond pulsed laser operating at 5.85 μm proved an effective less-invasive caries treatment.

40 CFR Appendix D to Part 61 - Methods for Estimating Radionuclide Emissions

Code of Federal Regulations, 2011 CFR

2011-07-01

... Table 1. Table 1—Adjustment to Emission Factors for Effluent Controls Controls Types of radionuclides... applicable to gaseous radionuclides; periodic testing is prudent to ensure high removal efficiency. Fabric...

40 CFR Appendix D to Part 61 - Methods for Estimating Radionuclide Emissions

Code of Federal Regulations, 2013 CFR

2013-07-01

... Table 1. Table 1—Adjustment to Emission Factors for Effluent Controls Controls Types of radionuclides... applicable to gaseous radionuclides; periodic testing is prudent to ensure high removal efficiency. Fabric...

Improved convolutional coding

NASA Technical Reports Server (NTRS)

Doland, G. D.

1970-01-01

Convolutional coding, used to upgrade digital data transmission under adverse signal conditions, has been improved by a method which ensures data transitions, permitting bit synchronizer operation at lower signal levels. Method also increases decoding ability by removing ambiguous condition.

Low acceptability of medical male circumcision as an HIV/AIDS prevention intervention within a South African community that practises traditional circumcision.

PubMed

Mark, Daniella; Middelkoop, Keren; Black, Samantha; Roux, Surita; Fleurs, Llewellyn; Wood, Robin; Bekker, Linda-Gail

2012-05-23

Traditional circumcision is practised among some indigenous tribes in South Africa (SA) such as the Xhosa. Recent experimental evidence has demonstrated the benefits of male circumcision for the prevention of HIV infection in heterosexual men. The acceptability of circumcision as a biomedical intervention mirroring an ingrained cultural practice, as well as the age and extent of the procedure, are poorly understood. Men aged 15 - 42 years were recruited in a peri-urban settlement near Cape Town. Participants completed an interviewer-administered questionnaire assessing self-reported circumcision status, context and reasons for previous or planned circumcision, and willingness to undergo medical circumcision for themselves or their sons. Results were confirmed by clinical examination. The most recent HIV test result was compared with circumcision status. Of the 199 men enrolled, 148 (74%) reported being traditionally circumcised; of the 51 not circumcised, 50 were planning the traditional procedure. Among men self-reporting circumcision, 40 (27%) had some or all of the foreskin remaining. The median age at traditional circumcision was 21 years (interquartile range 19 - 22 years). While knowledge of the preventive benefit of circumcision was reported by 128 men (66%), most were unwilling to undergo medical circumcision or allow their sons to do so, because of religion/culture, notions of manhood, and social disapproval. Almost all men in this study had undergone or were planning to undergo traditional circumcision and were largely opposed to the medically performed procedure. In the majority, traditional circumcision had occurred after the mean age of sexual debut and almost a quarter were found to have only partial foreskin removal. To ensure optimal HIV prevention benefits, strategies to facilitate complete foreskin removal prior to sexual debut within traditional circumcision practices require further attention.

The effect of landfill leachate composition on organics and nitrogen removal in an activated sludge system with bentonite additive.

PubMed

Wiszniowski, J; Surmacz-Górska, J; Robert, D; Weber, J-V

2007-10-01

A pre-denitrification activated sludge system (AS) without internal recycle was used in lab-scale studies of landfill leachate treatment. A bentonite supplement at a ratio of 1:4 (mineral : biomass) was used to ensure high sludge settling levels and to serve as a micro-organisms carrier. The system was operated within different parameters such as hydraulic retention time (HRT), ammonia loading rate (ALR) or external recycle ratio, which was adapted to treat varying leachate concentrations of COD and ammonia, ranging from 1020 to 2680 mgO(2)l(-1) and 400-890 mgNH(4)-Nl(-1) respectively. The nitrification was complete and ammonia oxidation reached 99%; this was obtained while the ALR did not exceed 0.09 g NH(4)(+)-Ng(-1)MLVSS d(-1) and HRT was not lower than 1 day (in the aeration reactor). The performance of denitrification was successfully improved by controlling the external recycle rate, when the BOD(5)/N ratio in the raw leachate was 4.1. Consequently, N-removal of up to 80% was achieved. A 10-fold decrease in the denitrification rate was obtained at a BOD(5)/N ratio of 0.5. The efficiency of COD removal varied significantly from 36% to 84%. The positive effect of bentonite addition was determined and is discussed based on preliminary studies. The experiments were carried out in fill-and-draw activated sludge with bentonite; the biomass ratio was 1:2. The activated sludge with bentonite was fed with a synthetic high ammonia and organic-free medium.

NMC should have vetting powers, claims charity.

PubMed

Snow, Tamsin

2011-01-26

THE NURSING and Midwifery Council (NMC) should be given enhanced powers to ensure that nurses who have been removed from its register cannot work in other areas of health and social care, according to an anti-abuse charity.

Disinfection of the hospital water supply: a hidden risk to dialysis patients

PubMed Central

2009-01-01

Water suitable for drinking is unsuited for use in the preparation of haemodialysis fluid and undergoes additional treatment. The primary component of the additional treatment is reverse osmosis, which does not remove low-molecular-weight contaminants, and the water treatment system must contain carbon beds or filters to ensure effective removal of such contaminants. The recent article by Bek and colleagues highlights an unrecognised issue with respect to chemicals that may be added to the water within hospitals to ensure that the distribution network is free of pathogens (for example, Legionella, pseudomonas, and mycobacteria) and underlines the need for personnel responsible for dialysis in a renal or intensive care setting to be aware of any potential effects that disinfection of the hospital water treatment system may have on the product water used in the preparation of dialysis fluid. Such awareness requires communication and the sharing of information between clinical and facilities staff. PMID:20053299

Checklists for 45/90 Preliminary Technical Screen

EPA Pesticide Factsheets

We use checklists to ensure that the application is ready for in depth review, as required by FIFRA. Applicants can use them to help ensure their applications are complete. You may submit the checklist with the application.

Removal of chromium from synthetic plating waste by zero-valent iron and sulfate-reducing bacteria.

PubMed

Guha, Saumyen; Bhargava, Puja

2005-01-01

Experiments were conducted to evaluate the potential of zero-valent iron and sulfate-reducing bacteria (SRB) for reduction and removal of chromium from synthetic electroplating waste. The zero-valent iron shows promising results as a reductant of hexavalent chromium (Cr+6) to trivalent chromium (Cr+3), capable of 100% reduction. The required iron concentration was a function of chromium concentration in the waste stream. Removal of Cr+3 by adsorption or precipitation on iron leads to complete removal of chromium from the waste and was a slower process than the reduction of Cr+6. Presence SRB in a completely mixed batch reactor inhibited the reduction of Cr+6. In a fixed-bed column reactor, SRB enhanced chromium removal and showed promising results for the treatment of wastes with low chromium concentrations. It is proposed that, for waste with high chromium concentration, zero-valent iron is an efficient reductant and can be used for reduction of Cr+6. For low chromium concentrations, a SRB augmented zero-valent iron and sand column is capable of removing chromium completely.

Tubular Tissues and Organs of Human Body--Challenges in Regenerative Medicine.

PubMed

Góra, Aleksander; Pliszka, Damian; Mukherjee, Shayanti; Ramakrishna, Seeram

2016-01-01

Tissue engineering of tubular organs such as the blood vessel, trachea gastrointestinal tract, urinary tract are of the great interest due to the high amount of surgeries performed annually on those organs. Development in tissue engineering in recent years and promising results, showed need to investigate more complex constructs that need to be designed in special manner. Stent technology remain the most widely used procedure to restore functions of tubular tissues after cancer treatment, or after organ removal due to traumatic accidents. Tubular structures like blood vessels, intestines, and trachea have to work in specific environment at the boundary of the liquids, solids or air and surrounding tissues and ensure suitable separation between them. This brings additional challenges in tissue engineering science in order to construct complete organs by using combinations of various cells along with the support material systems. Here we give a comprehensive review of the tubular structures of the human body, in perspective of the current methods of treatment and progress in regenerative medicine that aims to develop fully functioning organs of tubular shape. Extensive analysis of the available literature has been done focusing on materials and methods of creations of such organs. This work describes the attempts to incorporate growth factors and drugs within the scaffolds to ensure localized drug release and enhance vascularization of the organ by attracting blood vessels to the site of implantation.

Removal of chloropyrifos ethyl, tetradifon and chlorothalonil pesticide residues from citrus by using ozone.

PubMed

Kusvuran, Erdal; Yildirim, Deniz; Mavruk, Funda; Ceyhan, Mehmet

2012-11-30

The removal of chloropyrifos ethyl, tetradifon and chlorothalonil pesticide residues from the lemon, orange and grapefruit matrices were achieved by ozonation. All of chlorothalonil residues adsorbed onto the orange matrix were completely removed after 5 min ozonation. The highest removal percentages of tetradifon and chloropyrifos ethyl were achieved as 98.6 and 94.2%, respectively for the lemon and grapefruit matrices. All of diffused chlorothalonil and chloropyrifos ethyl residues were completely removed from both orange and grapefruit matrices after 5 min ozonation. Increasing of applied ozone dosage was not significantly effect on the removal percentages of pesticides whereas increasing of ozonation temperature caused a negative effect on the removal percentages of pesticides. The washing of the matrices with tap water was not as effective as ozonation in the removal of residual pesticides. Our results show that ozone treatment has a great potential for removing of residual pesticides from lemon, orange and grapefruit matrices. Copyright © 2012 Elsevier B.V. All rights reserved.

Cryoprotectants and their components induce plasmolytic responses in sweet potato suspension cells

USDA-ARS?s Scientific Manuscript database

Plant genebanks often use cryopreservation to securely conserve clonally propagated collections. Shoot tip cryopreservation procedures may employ vitrification techniques whereby highly concentrated solutions remove water and prevent ice crystallization, ensuring survival after liquid nitrogen expos...

25 CFR 162.233 - Who will own the improvements made under an agricultural lease?

Code of Federal Regulations, 2010 CFR

2010-04-01

... WATER LEASES AND PERMITS Agricultural Leases Lease Requirements § 162.233 Who will own the improvements... landowners choose not to exercise this option, we will take appropriate enforcement action to ensure removal...

25 CFR 162.233 - Who will own the improvements made under an agricultural lease?

Code of Federal Regulations, 2011 CFR

2011-04-01

... WATER LEASES AND PERMITS Agricultural Leases Lease Requirements § 162.233 Who will own the improvements... landowners choose not to exercise this option, we will take appropriate enforcement action to ensure removal...

25 CFR 162.233 - Who will own the improvements made under an agricultural lease?

Code of Federal Regulations, 2013 CFR

2013-04-01

... WATER LEASES AND PERMITS Agricultural Leases Lease Requirements § 162.233 Who will own the improvements... landowners choose not to exercise this option, we will take appropriate enforcement action to ensure removal...

25 CFR 162.233 - Who will own the improvements made under an agricultural lease?

Code of Federal Regulations, 2012 CFR

2012-04-01

... WATER LEASES AND PERMITS Agricultural Leases Lease Requirements § 162.233 Who will own the improvements... landowners choose not to exercise this option, we will take appropriate enforcement action to ensure removal...

25 CFR 162.233 - Who will own the improvements made under an agricultural lease?

Code of Federal Regulations, 2014 CFR

2014-04-01

... WATER LEASES AND PERMITS Agricultural Leases Lease Requirements § 162.233 Who will own the improvements... landowners choose not to exercise this option, we will take appropriate enforcement action to ensure removal...

Investigation of biotransformation, sorption, and desorption of multiple chemical contaminants in pilot-scale drinking water biofilters.

PubMed

Greenstein, Katherine E; Lew, Julia; Dickenson, Eric R V; Wert, Eric C

2018-06-01

The evolving demands of drinking water treatment necessitate processes capable of removing a diverse suite of contaminants. Biofiltration can employ biotransformation and sorption to remove various classes of chemicals from water. Here, pilot-scale virgin anthracite-sand and previously used biological activated carbon (BAC)-sand dual media filters were operated for ∼250 days to assess removals of 0.4 mg/L ammonia as nitrogen, 50-140 μg/L manganese, and ∼100 ng/L each of trace organic compounds (TOrCs) spiked into pre-ozonated Colorado River water. Anthracite achieved complete nitrification within 200 days and started removing ibuprofen at 85 days. Limited manganese (10%) removal occurred. In contrast, BAC completely nitrified ammonia within 113 days, removed all manganese at 43 days, and exhibited steady state removal of most TOrCs by 140 days. However, during the first 140 days, removal of caffeine, DEET, gemfibrozil, naproxen, and trimethoprim decreased, suggesting a shift from sorption to biotransformation. Acetaminophen and sulfamethoxazole were removed at consistent levels, with complete removal of acetaminophen achieved throughout the study; ibuprofen removal increased with time. When subjected to elevated (1 μg/L) concentrations of TOrCs, BAC removed larger masses of chemicals; with a subsequent decrease and ultimate cease in the TOrCs spike, caffeine, DEET, gemfibrozil, and trimethoprim notably desorbed. By the end of operation, anthracite and BAC exhibited equivalent quantities of biomass measured as adenosine triphosphate, but BAC harbored greater microbial diversity (examined with 16S rRNA sequencing). Improved insight was gained regarding concurrent biotransformation, sorption, and desorption of multiple organic and inorganic contaminants in pilot-scale drinking water biofilters. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Jet Inlet Efficiency

DTIC Science & Technology

2013-08-08

Lay down plastic sheeting that is double the size of the mold covered in fabric in order to fully envelope the mold. o Line half of the sheet (in...the mold and connect to clay tape to create an air tight sealed bag with a hose leading to the outside pump. o Once the seal is created, turn on the...connected pump to remove all air from the bag that has been created.  Ensure that as air is removed, the bag fits the form of the desired mold as

Allergic reaction to stainless steel sternotomy wires requiring removal: A case report and literature review.

PubMed

Lopez, J; Sachithanandan, A; Leow, M

2016-06-01

Hypersensitivity to stainless steel sternal sutures are an uncommon occurrence. We present a case of such a patient who developed chronic tissue overgranulation over a sternotomy wound eight weeks post-operatively. Primary suspicion was infection, a more common complication however radiological and laboratory investigation showed otherwise. Conservative management provided limited ephemeral success. After ensuring adequate sternal bone healing, the sutures and granulation tissue were eventually surgically removed without complication and the reoperated wound healed well.

Personnel Security Clearances: Additional Guidance and Oversight Needed at DHS and DOD to Ensure Consistent Application of Revocation Process

DTIC Science & Technology

2014-09-01

component, which provides an important check against unfairness and the taint of undue influence. These officials stated that having decision makers...removals, suspensions of more than 14 days, reductions in grade or pay , furloughs of 30 days or less, performance-based removals or reductions in grade...denials of within-grade salary increases, reduction-in-force actions, and OPM suitability determinations. 70See Department of Navy v. Egan, 484 U.S

Outcomes of serial dilation for high-grade radiation-related esophageal strictures in head and neck cancer patients.

PubMed

Francis, David O; Hall, Eric; Dang, Jennifer H; Vlacich, Gregory R; Netterville, James L; Vaezi, Michael F

2015-04-01

Dysphagia and esophageal stricture are frequent consequences of treatment for head and neck cancer. This study examines the effectiveness of the anterograde-retrograde rendezvous procedure and serial dilations in reestablishing esophageal patency to allow return to oral diet and gastrostomy tube removal in a cohort of patients with complete or near-complete esophageal stricture following nonsurgical cancer treatment. Retrospective review of patients treated with radiation therapy with or without concurrent chemotherapy presented with complete or near-complete esophageal stricture. Patients underwent serial dilations using combined anterograde-retrograde dilation (rendezvous) techniques. Medical records of patients having undergone treatment between 2006 and 2012 were reviewed, and semistructured interviews were also conducted to determine current swallowing function and actual patient experience. The primary outcome was swallowing improvement that allowed for return to oral diet and/or gastrostomy tube removal. Outcomes were compared between patients with complete and near-complete (<5 mm in diameter) strictures and univariate analysis performed to identify associations between patient, cancer, and treatment characteristics on odds of gastrostomy tube removal. Twenty-four patients (median age 59.5 years, 63% male, 91% Caucasian) underwent treatment. Fifty percent of patients had complete occlusion of the esophageal lumen. The majority of patients (92%) underwent either anterograde (54%) or combined antero-retrograde (38%) approach. Following a median (interquartile range) of 9 (6-20) dilation sessions, 42% of patients were able to return to an oral diet and/or had their gastrostomy tube removed. This outcome was independent of whether the stricture was complete or near complete (P = .67). Of patients who had their gastrostomy tubes removed, only 33.3% had ever smoked, compared to 92.3% of those whose tubes were not discharged (P = .007). Recannulation is possible even in cases of complete or near-complete stricture. Several factors appear to impact the likelihood of successful outcome, but in this study, only patients with a history of smoking had a significantly lower likelihood of return to full oral diet. © 2014 The American Laryngological, Rhinological and Otological Society, Inc.

Multiple evaluations of the removal of pollutants in road runoff by soil infiltration.

PubMed

Murakami, Michio; Sato, Nobuyuki; Anegawa, Aya; Nakada, Norihide; Harada, Arata; Komatsu, Toshiya; Takada, Hideshige; Tanaka, Hiroaki; Ono, Yoshiro; Furumai, Hiroaki

2008-05-01

Groundwater replenishment by infiltration of road runoff is expected to be a promising option for ensuring a sustainable urban water cycle. In this study, we performed a soil infiltration column test using artificial road runoff equivalent to approximately 11-12 years of rainfall to evaluate the removal of pollutants by using various chemical analyses and bioassay tests. These results indicated that soil infiltration treatment works effectively to remove most of the pollutants such as organic matter (chemical oxygen demand (CODMn) and dissolved organic carbon (DOC)), P species, polycyclic aromatic hydrocarbons (PAHs), numerous heavy metals and oestrogenic activities. Bioassay tests, including algal growth inhibition test, Microtox and mutagen formation potential (MFP) test, also revealed effective removal of toxicities by the soils. However, limited amounts of NO3, Mn, Ni, alkaline earth metals, perfluorooctane sulphonate (PFOS) and perfluorooctane sulphonamide (FOSA) were removed by the soils and they possibly reach the groundwater and cause contamination.

Tissue artifact removal from respiratory signals based on empirical mode decomposition.

PubMed

Liu, Shaopeng; Gao, Robert X; John, Dinesh; Staudenmayer, John; Freedson, Patty

2013-05-01

On-line measurement of respiration plays an important role in monitoring human physical activities. Such measurement commonly employs sensing belts secured around the rib cage and abdomen of the test object. Affected by the movement of body tissues, respiratory signals typically have a low signal-to-noise ratio. Removing tissue artifacts therefore is critical to ensuring effective respiration analysis. This paper presents a signal decomposition technique for tissue artifact removal from respiratory signals, based on the empirical mode decomposition (EMD). An algorithm based on the mutual information and power criteria was devised to automatically select appropriate intrinsic mode functions for tissue artifact removal and respiratory signal reconstruction. Performance of the EMD-algorithm was evaluated through simulations and real-life experiments (N = 105). Comparison with low-pass filtering that has been conventionally applied confirmed the effectiveness of the technique in tissue artifacts removal.

The NOAA Scientific Computing System Data Assembly Center

NASA Astrophysics Data System (ADS)

Suchdeve, K. L.; Smith, S. R.; Van Waes, M.

2016-02-01

The Scientific Computing System (SCS) Data Assembly Center (DAC) was established in 2014 by the Office of Marine and Aviation Operations (OMAO) to evaluate the quality of full-resolution (sampling on the order of once per second) data collected by SCS onboard NOAA-operated research vessels. The SCS data are nominally transferred from the vessel to the National Centers for Environmental Information (NCEI) soon after the completion of each cruise and are complimented with detailed cruise metadata from OMAO. The authors will describe tools developed by the SCS DAC to monitor the timeliness of SCS data delivery to NCEI and the completeness of the SCS packages received by NCEI (ensuring the package contains data for all enabled sensors on a given cruise). Feedback to OMAO and NCEI regarding the timeliness and data completeness will be outlined along with challenges encountered by the DAC as it works to develop automated quality assessment of the SCS data packages.Data collected by SCS on NOAA vessels represent a significant investment by the American taxpayer. The mission of the SCS DAC is to ensure that archived SCS data at NCEI are a complete record of the observations made on NOAA research cruises. Archival of complete SCS datasets at NCEI ensures these data are preserved for future generations of scientists, policy makers, and the public.

An Ultra-Precise Method for the Nano Thin-Film Removal

NASA Astrophysics Data System (ADS)

Pa, P. S.

In this research an electrode-set is used to investigate via an ultra-precise method for the removal of Indium Tin Oxide (ITO) thin-film microstructure from defective display panels to conquer the low yield rate in display panel production as to from imperfect Indium Tin Oxide layer deposition is well known. This process, which involves the removal of ITO layer substructure by means of an electrochemical removal (ECMR), is of major interest to the optoelectronics semiconductor industry. In this electro machining process a high current flow and high feed rate of the display (color filter) achieves complete and efficient removal of the ITO layer. The ITO thin-film can be removed completely by a proper combination of feed rate and electric power. A small gap between the diameter cathode virtual rotation circle and the diameter virtual rotation circle also corresponds to a higher removal rate. A small anode edge radius with a small cathode edge radius effectively improves dregs discharge and is an advantage when associated with a high workpiece feed rate. This precision method for the recycling of defective display screen color filters is presented as an effective tool for use in the screen manufacturing process. The defective Indium Tin Oxide thin-film can be removed easily and cleanly in a short time. The complete removal of the ITO layer makes it possible to put these panels back into the production line for reuse with a considerable reduction of both waste and production cost.

Skull base tumors: a kaleidoscope of challenge.

PubMed

Khanna, J N; Natrajan, Srivalli; Galinde, Jyotsna

2014-08-01

Resection of skull base lesions has always been riddled with problems like inadequate access, proximity to major vessels, dural tears, cranial nerve damage, and infection. Understanding the modular concept of the facial skeleton has led to the development of transfacial swing osteotomies that facilitates resection in a difficult area with minimal morbidity and excellent cosmetic results. In spite of the current trend toward endonasal endoscopic management of skull base tumors, our series presents nine cases of diverse extensive skull base lesions, 33% of which were recurrent. These cases were approached through different transfacial swing osteotomies through the mandible, a midfacial swing, or a zygomaticotemporal osteotomy as dictated by the three-dimensional spatial location of the lesion, and its extent and proximity to vital structures. Access osteotomies ensured complete removal and good results through the most direct and safe route and good vascular control. This reiterated the fact that transfacial approaches still hold a special place in the management of extensive skull base lesions.

Skull Base Tumors: A Kaleidoscope of Challenge

PubMed Central

Khanna, J.N.; Natrajan, Srivalli; Galinde, Jyotsna

2014-01-01

Resection of skull base lesions has always been riddled with problems like inadequate access, proximity to major vessels, dural tears, cranial nerve damage, and infection. Understanding the modular concept of the facial skeleton has led to the development of transfacial swing osteotomies that facilitates resection in a difficult area with minimal morbidity and excellent cosmetic results. In spite of the current trend toward endonasal endoscopic management of skull base tumors, our series presents nine cases of diverse extensive skull base lesions, 33% of which were recurrent. These cases were approached through different transfacial swing osteotomies through the mandible, a midfacial swing, or a zygomaticotemporal osteotomy as dictated by the three-dimensional spatial location of the lesion, and its extent and proximity to vital structures. Access osteotomies ensured complete removal and good results through the most direct and safe route and good vascular control. This reiterated the fact that transfacial approaches still hold a special place in the management of extensive skull base lesions. PMID:25083368

Towards a high yield recovery of polyphenols from olive mill wastewater on activated carbon coated with milk proteins: Experimental design and antioxidant activity.

PubMed

Yangui, Asma; Abderrabba, Manef

2018-10-01

Activated carbon coated with milk proteins was used for the removal and recovery of phenolic compounds from actual olive mill wastewater (OMW). The extraction of polyphenols using the new adsorbent based on natural coating agent has significant potential compared with traditional extraction methods, as it significantly increases the extraction yield (80%) and overall efficiencies of the process for total phenols (75.4%) and hydroxytyrosol (90.6%) which is the most valuable compound. Complete discussions on the adsorption isotherms, kinetic and thermodynamic were performed and the optimum adsorption variables were investigated using the response surface methodology and the central composite experimental design. The extracted polyphenols exhibited a high antioxidant activity and a fast scavenging effect on DPPH free radical. The strategy devised in this work for polyphenol extraction using modified activated carbon with biological coating agent is of simple design, very effective and ensure the recovery of highly antioxidant extract. Copyright © 2018 Elsevier Ltd. All rights reserved.

Primary aneurysmal bone cyst of coronoid process

PubMed Central

Goyal, Amit; Tyagi, Isha; Syal, Rajan; Agrawal, Tanu; Jain, Manoj

2006-01-01

Background Aneurysmal bone cysts are relatively uncommon in the facial skeleton. These usually affect the mandible but origin from the coronoid process is even rarer. To the best of our knowledge, this is the first reported case of a coronoid process aneurysmal bone cyst presenting as temporal fossa swelling. Case presentation A 17 year old boy presented with a progressively increasing swelling in the left temporal region developed over the previous 8 months. An expansile lytic cystic lesion originating from the coronoid process of the left mandible and extending into the infratemporal and temporal fossa regions was found on CT scan. It was removed by a superior approach to the infratemporal fossa. Conclusion Aneurysmal bone cyst of the coronoid process can attain enormous dimensions until the temporal region is also involved. A superior approach to the infratemporal fossa is a reasonable approach for such cases, providing wide exposure and access to all parts of the lesion and ensuring better control and complete excision. PMID:16533409

Accuracy of clinical coding for procedures in oral and maxillofacial surgery.

PubMed

Khurram, S A; Warner, C; Henry, A M; Kumar, A; Mohammed-Ali, R I

2016-10-01

Clinical coding has important financial implications, and discrepancies in the assigned codes can directly affect the funding of a department and hospital. Over the last few years, numerous oversights have been noticed in the coding of oral and maxillofacial (OMF) procedures. To establish the accuracy and completeness of coding, we retrospectively analysed the records of patients during two time periods: March to May 2009 (324 patients), and January to March 2014 (200 patients). Two investigators independently collected and analysed the data to ensure accuracy and remove bias. A large proportion of operations were not assigned all the relevant codes, and only 32% - 33% were correct in both cycles. To our knowledge, this is the first reported audit of clinical coding in OMFS, and it highlights serious shortcomings that have substantial financial implications. Better input by the surgical team and improved communication between the surgical and coding departments will improve accuracy. Copyright © 2016 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Primary neurolymphomatosis of the lower cranial nerves presenting as Dysphagia and hoarseness: a case report.

PubMed

Sakai, Naoto; Ito-Yamashita, Tae; Takahashi, Goro; Baba, Satoshi; Koizumi, Shinichiro; Yamasaki, Tomohiro; Tokuyama, Tsutomu; Namba, Hiroki

2014-08-01

Primary neurolymphomatosis is an extremely rare tumor. We report the case of a 74-year-old patient presenting with dysphagia and hoarseness. Initial contrast-enhanced computed tomography of the head, neck, and chest did not reveal any lesions. His symptoms improved with short-term administration of prednisone but recurred and deteriorated. Magnetic resonance (MR) imaging revealed a tumor along the ninth and tenth cranial nerves across the jugular foramen. Fluorine-18 fluorodeoxyglucose positron emission tomography indicated this was a primary tumor. Repeated MR imaging after 2 months revealed considerable tumor enlargement. A left suboccipital craniotomy was performed to remove the tumor that infiltrated the ninth and tenth cranial nerves. The histopathologic diagnosis was diffuse large B-cell lymphoma. Although focal radiation therapy was administered to ensure complete eradication of the tumor, the patient died of aspiration pneumonia with systemic metastasis. To our knowledge, this is the first reported case of primary neurolymphomatosis in the lower cranial nerves.

Dynamic modelling of a forward osmosis-nanofiltration integrated process for treating hazardous wastewater.

PubMed

Pal, Parimal; Das, Pallabi; Chakrabortty, Sankha; Thakura, Ritwik

2016-11-01

Dynamic modelling and simulation of a nanofiltration-forward osmosis integrated complete system was done along with economic evaluation to pave the way for scale up of such a system for treating hazardous pharmaceutical wastes. The system operated in a closed loop not only protects surface water from the onslaught of hazardous industrial wastewater but also saves on cost of fresh water by turning wastewater recyclable at affordable price. The success of dynamic modelling in capturing the relevant transport phenomena is well reflected in high overall correlation coefficient value (R 2  > 0.98), low relative error (<0.1) and Willmott d-index (<0.95). The system could remove more than 97.5 % chemical oxygen demand (COD) from real pharmaceutical wastewater having initial COD value as high as 3500 mg/L while ensuring operation of the forward osmosis loop at a reasonably high flux of 56-58 l per square meter per hour.

Adaptive neural control of MIMO nonlinear systems with a block-triangular pure-feedback control structure.

PubMed

Chen, Zhenfeng; Ge, Shuzhi Sam; Zhang, Yun; Li, Yanan

2014-11-01

This paper presents adaptive neural tracking control for a class of uncertain multiinput-multioutput (MIMO) nonlinear systems in block-triangular form. All subsystems within these MIMO nonlinear systems are of completely nonaffine pure-feedback form and allowed to have different orders. To deal with the nonaffine appearance of the control variables, the mean value theorem is employed to transform the systems into a block-triangular strict-feedback form with control coefficients being couplings among various inputs and outputs. A systematic procedure is proposed for the design of a new singularity-free adaptive neural tracking control strategy. Such a design procedure can remove the couplings among subsystems and hence avoids the possible circular control construction problem. As a consequence, all the signals in the closed-loop system are guaranteed to be semiglobally uniformly ultimately bounded. Moreover, the outputs of the systems are ensured to converge to a small neighborhood of the desired trajectories. Simulation studies verify the theoretical findings revealed in this paper.

Droplet microfluidics with magnetic beads: a new tool to investigate drug-protein interactions.

PubMed

Lombardi, Dario; Dittrich, Petra S

2011-01-01

In this study, we give the proof of concept for a method to determine binding constants of compounds in solution. By implementing a technique based on magnetic beads with a microfluidic device for segmented flow generation, we demonstrate, for individual droplets, fast, robust and complete separation of the magnetic beads. The beads are used as a carrier for one binding partner and hence, any bound molecule is separated likewise, while the segmentation into small microdroplets ensures fast mixing, and opens future prospects for droplet-wise analysis of drug candidate libraries. We employ the method for characterization of drug-protein binding, here warfarin to human serum albumin. The approach lays the basis for a microfluidic droplet-based screening device aimed at investigating the interactions of drugs with specific targets including enzymes and cells. Furthermore, the continuous method could be employed for various applications, such as binding assays, kinetic studies, and single cell analysis, in which rapid removal of a reactive component is required.

Surface Phenomena During Plasma-Assisted Atomic Layer Etching of SiO2.

PubMed

Gasvoda, Ryan J; van de Steeg, Alex W; Bhowmick, Ranadeep; Hudson, Eric A; Agarwal, Sumit

2017-09-13

Surface phenomena during atomic layer etching (ALE) of SiO 2 were studied during sequential half-cycles of plasma-assisted fluorocarbon (CF x ) film deposition and Ar plasma activation of the CF x film using in situ surface infrared spectroscopy and ellipsometry. Infrared spectra of the surface after the CF x deposition half-cycle from a C 4 F 8 /Ar plasma show that an atomically thin mixing layer is formed between the deposited CF x layer and the underlying SiO 2 film. Etching during the Ar plasma cycle is activated by Ar + bombardment of the CF x layer, which results in the simultaneous removal of surface CF x and the underlying SiO 2 film. The interfacial mixing layer in ALE is atomically thin due to the low ion energy during CF x deposition, which combined with an ultrathin CF x layer ensures an etch rate of a few monolayers per cycle. In situ ellipsometry shows that for a ∼4 Å thick CF x film, ∼3-4 Å of SiO 2 was etched per cycle. However, during the Ar plasma half-cycle, etching proceeds beyond complete removal of the surface CF x layer as F-containing radicals are slowly released into the plasma from the reactor walls. Buildup of CF x on reactor walls leads to a gradual increase in the etch per cycle.

Impacts from Partial Removal of Decommissioned Oil and Gas Platforms on Fish Biomass and Production on the Remaining Platform Structure and Surrounding Shell Mounds.

PubMed

Claisse, Jeremy T; Pondella, Daniel J; Love, Milton; Zahn, Laurel A; Williams, Chelsea M; Bull, Ann S

2015-01-01

When oil and gas platforms become obsolete they go through a decommissioning process. This may include partial removal (from the surface to 26 m depth) or complete removal of the platform structure. While complete removal would likely eliminate most of the existing fish biomass and associated secondary production, we find that the potential impacts of partial removal would likely be limited on all but one platform off the coast of California. On average 80% of fish biomass and 86% of secondary fish production would be retained after partial removal, with above 90% retention expected for both metrics on many platforms. Partial removal would likely result in the loss of fish biomass and production for species typically found residing in the shallow portions of the platform structure. However, these fishes generally represent a small proportion of the fishes associated with these platforms. More characteristic of platform fauna are the primarily deeper-dwelling rockfishes (genus Sebastes). "Shell mounds" are biogenic reefs that surround some of these platforms resulting from an accumulation of mollusk shells that have fallen from the shallow areas of the platforms mostly above the depth of partial removal. We found that shell mounds are moderately productive fish habitats, similar to or greater than natural rocky reefs in the region at comparable depths. The complexity and areal extent of these biogenic habitats, and the associated fish biomass and production, will likely be reduced after either partial or complete platform removal. Habitat augmentation by placing the partially removed platform superstructure or some other additional habitat enrichment material (e.g., rock boulders) on the seafloor adjacent to the base of partially removed platforms provides additional options to enhance fish production, potentially mitigating reductions in shell mound habitat.

Potential Fish Production Impacts from Partial Removal of Decommissioned Oil and Gas Platforms off the Coast of California

NASA Astrophysics Data System (ADS)

Claisse, J.; Pondella, D.; Love, M.; Zahn, L.; Williams, C.; Bull, A. S.

2016-02-01

When oil and gas platforms become obsolete they go through a decommissioning process. This may include partial removal (from the surface to 26 m depth) or complete removal of the platform structure. While complete removal would likely eliminate most of the existing fish biomass and associated secondary production, we find that the potential impacts of partial removal would likely be limited on all but one platform off the coast of California. On average 80% of fish biomass and 86% of secondary fish production would be retained after partial removal, with above 90% retention expected for both metrics on many platforms. Partial removal would likely result in the loss of fish biomass and production for species typically found residing in the shallow portions of the platform structure. However, these fishes generally represent a small proportion of the fishes associated with these platforms. More characteristic of platform fauna are the primarily deeper-dwelling rockfishes (genus Sebastes). "Shell mounds" are biogenic reefs that surround some of these platforms resulting from an accumulation of mollusk shells that have fallen from the shallow areas of the platforms mostly above the depth of partial removal. We found that shell mounds are moderately productive fish habitats, similar to or greater than natural rocky reefs in the region at comparable depths. The complexity and areal extent of these biogenic habitats, and the associated fish biomass and production, will likely be reduced after either partial or complete platform removal. Habitat augmentation by placing the partially removed platform superstructure or some other additional habitat enrichment material (e.g., rock boulders) on the seafloor adjacent to the base of partially removed platforms provides additional options to enhance fish production, potentially mitigating reductions in shell mound habitat.

Isaac Newton and Student College Completion

ERIC Educational Resources Information Center

Tinto, Vincent

2013-01-01

Success in college is built upon classroom success, but success in the classroom does not in itself ensure college completion. Completion arises from success in a sequence of classes one after another over time. It does so most frequently when students are presented with coherent course pathways to degree completion, are able to gain degree credit…

COLLABORATIVE INVESTIGATION AT A BIOSOLIDS LAND APPLICATION TEST SITE

EPA Science Inventory

Wastewater treatment ensures that solid and dissolved constituents are removed from the water that goes down the drain daily from homes and industries throughout the nation. Ideally, the water released from the treatment plant back into the environment will have negligible remai...

Solving the 10 Most Common Carpet Problems.

ERIC Educational Resources Information Center

Hilton, Michael

1998-01-01

Identifies the 10 most common carpet problems in school facilities and offers solutions. These include: transition areas, moisture, spot removal, recurring spots, cleaning agents, allergens, wicking, biological contamination, equipment selection, and cleaning methods. Ensuring a successful maintenance program results in satisfactory appearance,…

Migration of polycyclic aromatic hydrocarbons (PAHs) in urban treatment sludge to the air during PAH removal applications.

PubMed

Karaca, Gizem; Cindoruk, S Siddik; Tasdemir, Yücel

2014-05-01

In the present study, the amounts of polycylic aromatic hydrocarbons (PAHs) penetrating into air during PAH removal applications from the urban treatment sludge were investigated. The effects of the temperature, photocatalyst type, and dose on the PAH removal efficiencies and PAH evaporation were explained. The sludge samples were taken from an urban wastewater treatment plant located in the city of Bursa, with 585,000 equivalent population. The ultraviolet C (UV-C) light of 254 nm wavelength was used within the UV applications performed on a specially designed setup. Internal air of the setup was vacuumed through polyurethane foam (PUF) columns in order to collect the evaporated PAHs from the sludge during the PAH removal applications. All experiments were performed with three repetitions. The PAH concentrations were measured by gas chromatography-mass spectrometry (GC-MS). It was observed that the amounts of PAHs penetrating into the air were increased with increase of temperature, and more than 80% of PAHs migrated to the air consisted of 3-ring compounds during the UV and UV-diethylamine (DEA) experiments at 38 and 53 degrees C. It was determined that 40% decrease was ensured in sigma12 (total of 12) PAH amounts with UV application and 13% of PAHs in sludge penetrated into the air. In the UV-TiO2 applications, a maximum 80% of sigma12 PAH removal was obtained by adding 0.5% TiO2 of dry weight of sludge. The quantity of PAH penetrating into air did not exceed 15%. UV-TiO2 applications ensured high levels of PAH removal in the sludge and also reduced the quantity of PAH penetrating into the air. Within the scope of the samples added with DEA, there was no increase in PAH removal efficiencies and the penetration of PAHs into air was not decreased. In light of these data, it was concluded that UV-TiO2 application is the most suitable PAH removal alternative that restricts the convection of PAH pollution.

Complicated vascular access port removals: incidence, antecedents and avoidance.

PubMed

Teague, Warwick J; Fouad, Dina; Munro, Fraser D; McCabe, Amanda J

2015-09-01

Port removal is usually a straightforward procedure delegated to trainees. However, some port removals are complicated by central venous catheter (CVC) fragmentation, a challenge for even experienced surgeons. This study aimed to determine the incidence of, and risk factors for, complicated port removal in children. A single-centre study assessed the outcome of removal for all paediatric ports inserted from 1996 to 2012. Data were recorded detailing patient, insertion, device and removal characteristics. Risk factors for complicated removals were scrutinised using Chi-square tests; p < 0.05 significant. Of 628 ports inserted from 1996 to 2012, 443 were subsequently removed at the same centre. 8/443 (1.8%) removals were complicated by CVC fragmentation, a median of 3.3 (2.4-3.9) years after insertion. Of complicated cases, 8/8 underwent formal neck dissection, 3/8 intravascular dissection, and 1/8 endovascular retrieval. 2/8 cases have retained intravascular CVC fragments. Risk factors for complication were CVC caliber <6Fr (p < 0.001) and use duration >2 years (p < 0.001). Greatest care and senior supervision should be ensured when removing ports with CVC caliber <6Fr and/or >2 years since insertion. However, complications also occur with larger CVCs or after shorter durations. Therefore, the key to avoiding complicated port removal may simply be: preparation, preparation, neck preparation.

Effects of long-term exposure on LDEF fastener assemblies

NASA Astrophysics Data System (ADS)

Spear, Steve; Dursch, Harry

1992-09-01

This presentation summarizes the Systems Special Investigations Group (SIG) findings from testing and analysis of fastener assemblies used on the Long Duration Exposure Facility (LDEF) structure, the tray mounting clamps, and by the various experimenters. The LDEF deintegration team and several experimenters noted severe fastener damage and hardware removal difficulties during post-flight activities. The System SIG has investigated all reported instances, and in all cases examined to date, the difficulties were attributed to galling during installation or post-flight removal. To date, no evidence of coldwelding was found. Correct selection of materials and lubricants as well as proper mechanical procedures is essential to ensure successful on-orbit or post-flight installation and removal of hardware.

Effects of long-term exposure on LDEF fastener assemblies

NASA Technical Reports Server (NTRS)

Spear, Steve; Dursch, Harry

1992-01-01

This presentation summarizes the Systems Special Investigations Group (SIG) findings from testing and analysis of fastener assemblies used on the Long Duration Exposure Facility (LDEF) structure, the tray mounting clamps, and by the various experimenters. The LDEF deintegration team and several experimenters noted severe fastener damage and hardware removal difficulties during post-flight activities. The System SIG has investigated all reported instances, and in all cases examined to date, the difficulties were attributed to galling during installation or post-flight removal. To date, no evidence of coldwelding was found. Correct selection of materials and lubricants as well as proper mechanical procedures is essential to ensure successful on-orbit or post-flight installation and removal of hardware.

Report: Significant Data Quality Deficiencies Impede EPA’s Ability to Ensure Companies Can Pay for Cleanups

EPA Pesticide Factsheets

Report #16-P-0126, March 31, 2016. Management Alert. Environmental and extensive financial risks exist from the EPA's failure to have accurate and complete data to monitor and ensure compliance with RCRA and CERCLA financial assurance requirements.

25 CFR 211.7 - Environmental studies.

Code of Federal Regulations, 2011 CFR

2011-04-01

.... (b) The Secretary shall ensure that all necessary surveys are performed and clearances obtained in... Enhancement of the Cultural Environment (3 CFR, 1971 through 1975 Comp., p. 559). If these surveys indicate... other related research is conducted and ensure that complete data describing the historic property is...

25 CFR 211.7 - Environmental studies.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... (b) The Secretary shall ensure that all necessary surveys are performed and clearances obtained in... Enhancement of the Cultural Environment (3 CFR, 1971 through 1975 Comp., p. 559). If these surveys indicate... other related research is conducted and ensure that complete data describing the historic property is...

25 CFR 211.7 - Environmental studies.

Code of Federal Regulations, 2014 CFR

2014-04-01

.... (b) The Secretary shall ensure that all necessary surveys are performed and clearances obtained in... Enhancement of the Cultural Environment (3 CFR, 1971 through 1975 Comp., p. 559). If these surveys indicate... other related research is conducted and ensure that complete data describing the historic property is...

25 CFR 211.7 - Environmental studies.

Code of Federal Regulations, 2012 CFR

2012-04-01

.... (b) The Secretary shall ensure that all necessary surveys are performed and clearances obtained in... Enhancement of the Cultural Environment (3 CFR, 1971 through 1975 Comp., p. 559). If these surveys indicate... other related research is conducted and ensure that complete data describing the historic property is...

25 CFR 211.7 - Environmental studies.

Code of Federal Regulations, 2013 CFR

2013-04-01

.... (b) The Secretary shall ensure that all necessary surveys are performed and clearances obtained in... Enhancement of the Cultural Environment (3 CFR, 1971 through 1975 Comp., p. 559). If these surveys indicate... other related research is conducted and ensure that complete data describing the historic property is...

Wide-field piecemeal cold snare polypectomy of large sessile serrated polyps without a submucosal injection is safe.

PubMed

Tate, David J; Awadie, Halim; Bahin, Farzan F; Desomer, Lobke; Lee, Ralph; Heitman, Steven J; Goodrick, Kathleen; Bourke, Michael J

2018-03-01

BACKGROUND AND STUDY AIMS : Large series suggest endoscopic mucosal resection is safe and effective for the removal of large (≥ 10 mm) sessile serrated polyps (SSPs), but it exposes the patient to the risks of electrocautery, including delayed bleeding. We examined the feasibility and safety of piecemeal cold snare polypectomy (pCSP) for the resection of large SSPs.  Sequential large SSPs (10 - 35 mm) without endoscopic evidence of dysplasia referred over 12 months to a tertiary endoscopy center were considered for pCSP. A thin-wire snare was used in all cases. Submucosal injection was not performed. High definition imaging of the defect margin was used to ensure the absence of residual serrated tissue. Adverse events were assessed at 2 weeks and surveillance was planned for between 6 and 12 months.  41 SSPs were completely removed by pCSP in 34 patients. The median SSP size was 15 mm (interquartile range [IQR] 14.5 - 20 mm; range 10 - 35 mm). The median procedure duration was 4.5 minutes (IQR 1.4 - 6.3 minutes). There was no evidence of perforation or significant intraprocedural bleeding. At 2-week follow-up, there were no significant adverse events, including delayed bleeding and post polypectomy syndrome. First follow-up has been undertaken for 15 /41 lesions at a median of 6 months with no evidence of recurrence.  There is potential for pCSP to become the standard of care for non-dysplastic large SSPs. This could reduce the burden of removing SSPs on patients and healthcare systems, particularly by avoidance of delayed bleeding. © Georg Thieme Verlag KG Stuttgart · New York.

Ex vivo MRI evaluation of breast tumors: a novel tool for verifying resection of nonpalpable only MRI detected lesions.

PubMed

Agresti, Roberto; Trecate, Giovanna; Ferraris, Cristina; Valeri, Barbara; Maugeri, Ilaria; Pellitteri, Cristina; Martelli, Gabriele; Migliavacca, Silvana; Carcangiu, Maria Luisa; Bohm, Silvia; Maffioli, Lorenzo; Vergnaghi, Daniele; Panizza, Pietro

2013-01-01

A fundamental question in surgery of only magnetic resonance imaging (MRI)-detected breast lesions is to ensure their removal when they are not palpable by clinical examination and surgical exploration. This is especially relevant in the case of small tumors, carcinoma in situ or lobular carcinoma. Thirty-nine patients were enrolled in the study, 21 patients with breast lesions detected by both conventional imaging and breast MRI (bMRI) and 18 patients with bMRI findings only. Preoperative bMRI allowed staging the disease and localizing the lesion. In the operating theater, contrast medium was injected 1 minute before skin incision. After removal, surgical specimens were submitted to ex vivo MRI, performed using a dedicated surface coil and Spair inversion recovery sequences for suppression of fat signal intensity. All MRI enhancing lesions were completely included within the surgical specimen and visualized by ex vivo MRI. In the first 21 patients, bMRI was able to visualize branching margins or satellite nodules around the core lesion, and allowed for better staging of the surrounding in situ carcinoma; in the last 18 patients, eight of whom were breast cancer type 1 susceptibility protein (BRCA) mutation carriers, bMRI identified 12 malignant tumors, otherwise undetectable, that were all visualized by ex vivo MRI. This is the first description of a procedure that re-enhances breast lesions within a surgical specimen, demonstrating the surgical removal of nonpalpable breast lesions diagnosed only with bMRI. This new strategy reproduces the morphology and the entire extension of the primary lesion on the specimen, with potentially better local surgical control, reducing additional unplanned surgery. © 2013 Wiley Periodicals, Inc.

Independent component analysis for cochlear implant artifacts attenuation from electrically evoked auditory steady-state response measurements

NASA Astrophysics Data System (ADS)

Deprez, Hanne; Gransier, Robin; Hofmann, Michael; van Wieringen, Astrid; Wouters, Jan; Moonen, Marc

2018-02-01

Objective. Electrically evoked auditory steady-state responses (EASSRs) are potentially useful for objective cochlear implant (CI) fitting and follow-up of the auditory maturation in infants and children with a CI. EASSRs are recorded in the electro-encephalogram (EEG) in response to electrical stimulation with continuous pulse trains, and are distorted by significant CI artifacts related to this electrical stimulation. The aim of this study is to evaluate a CI artifacts attenuation method based on independent component analysis (ICA) for three EASSR datasets. Approach. ICA has often been used to remove CI artifacts from the EEG to record transient auditory responses, such as cortical evoked auditory potentials. Independent components (ICs) corresponding to CI artifacts are then often manually identified. In this study, an ICA based CI artifacts attenuation method was developed and evaluated for EASSR measurements with varying CI artifacts and EASSR characteristics. Artifactual ICs were automatically identified based on their spectrum. Main results. For 40 Hz amplitude modulation (AM) stimulation at comfort level, in high SNR recordings, ICA succeeded in removing CI artifacts from all recording channels, without distorting the EASSR. For lower SNR recordings, with 40 Hz AM stimulation at lower levels, or 90 Hz AM stimulation, ICA either distorted the EASSR or could not remove all CI artifacts in most subjects, except for two of the seven subjects tested with low level 40 Hz AM stimulation. Noise levels were reduced after ICA was applied, and up to 29 ICs were rejected, suggesting poor ICA separation quality. Significance. We hypothesize that ICA is capable of separating CI artifacts and EASSR in case the contralateral hemisphere is EASSR dominated. For small EASSRs or large CI artifact amplitudes, ICA separation quality is insufficient to ensure complete CI artifacts attenuation without EASSR distortion.

Influence of wavelength on the laser removal of lichens colonizing heritage stone

NASA Astrophysics Data System (ADS)

Sanz, M.; Oujja, M.; Ascaso, C.; Pérez-Ortega, S.; Souza-Egipsy, V.; Fort, R.; de los Rios, A.; Wierzchos, J.; Cañamares, M. V.; Castillejo, M.

2017-03-01

Laser irradiation of lichen thalli on heritage stones serves for the control of epilithic and endolithic biological colonizations. In this work we investigate rock samples from two quarries traditionally used as source of monumental stone, sandstone from Valonsadero (Soria, Spain) and granite from Alpedrete (Madrid, Spain), in order to find conditions for efficient laser removal of lichen thalli that ensure preservation of the lithic substrate. The samples presented superficial areas colonized by different types of crustose lichens, i.e. Candelariella vitellina, Aspicilia viridescens, Rhizocarpon disporum and Protoparmeliopsis muralis in Valonsadero samples and P. cf. bolcana and A. cf. contorta in Alpedrete samples. A comparative laser cleaning study was carried out on the mentioned samples with ns Q-switched Nd:YAG laser pulses of 1064 nm (fundamental radiation), 355 nm (3rd harmonic) and 266 nm (4th harmonic) and sequences of IR-UV pulses. A number of techniques such as UV-Vis absorption spectroscopy, stereomicroscopy, scanning electron microscopy (SEM) at low vacuum, SEM with backscattered electron imaging (SEM-BSE), electron dispersive spectroscopy (EDS) and FT-Raman spectroscopy were employed to determine the best laser irradiation conditions and to detect possible structural, morphological and chemical changes on the irradiated surfaces. The results show that the laser treatment does not lead to the complete removal of the studied lichen thalli, although clearly induces substantial damage, in the form of loss of the lichen upper cortex and damage to the algal layer. In the medium term these alterations could result in the destruction of the lichen thalli, thus providing a degree of control of the biodeterioration processes of the lithic substrate and reducing the chances of subsequent lichen recolonization.

Effects of additives on 2,4,6-trinitrotoluene (TNT) removal and its mineralization in aqueous solution by gamma irradiation.

PubMed

Lee, Byungjin; Jeong, Seung-Woo

2009-06-15

The effects of additives (i.e., methanol, EDTA, mannitol, thiourea, nitrous oxide, oxygen and ozone) on gamma irradiation of 2,4,6-trinitrotoluene (TNT) were investigated to elucidate the initial reaction mechanism of TNT degradation and suggest an practical method for complete by-product removal. All additives, except thiourea, significantly increased the TNT removal efficiency by gamma irradiation. The overall results of the additive experiments implied that the TNT decomposition would be initiated by *OH, e(aq)(-), and HO(2*)/O(2*)(-), and also implied that *H did not have any direct effect on the TNT decomposition. Additions of methanol and nitrous oxide were more effective in TNT removal than the other additives, achieving complete removal of TNT at doses below 20 kGy. Total organic carbon (TOC) of the irradiated solution was analyzed to evaluate the degree of TNT mineralization under the additive conditions. TOC under the nitrous oxide addition was removed rapidly, and complete TNT mineralization was thus achieved at 50 kGy. Methanol addition was very effective in the TNT removal, but it was not effective in reduction in TOC. Trinitrobenzene (TNB), oxalic acid and glyoxalic acid were detected as radiolytic organic by-products, while ammonia and nitrate were detected as radiolytic inorganic by-products. The most efficient TNT removal and its mineralization by gamma irradiation would be achieved by supersaturating the solution with nitrous oxide before irradiation.

78 FR 48628 - Importation of Papayas From Peru

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-09

... would include requirements for approved production locations; field sanitation; hot water treatment... sanitation, and hot water treatment to remove pests of concern from the pathway. Only commercial consignments... would ensure that the hot water dip treatment discussed later in this document is effective, as that...

Effects of mesquite control and mulching treatments on herbage production on semiarid shrub-grasslands

Treesearch

Stacy Pease; Peter F. Ffolliott; Leonard F. DeBano; Gerald J. Gottfried

2000-01-01

Effects of complete removal of mesquite overstory, complete removal of mesquite overstory with control of post-treatment sprouts, and retention of the mesquite overstory as a control on herbage production are described. Mulching treatments included applications of a chip mulch, a commercial compost, lopped-and-scattered mesquite branchwood, and an untreated control....

Latino College Completion: Oregon

ERIC Educational Resources Information Center

Excelencia in Education (NJ1), 2012

2012-01-01

In 2009, Excelencia in Education launched the Ensuring America's Future initiative to inform, organize, and engage leaders in a tactical plan to increase Latino college completion. An executive summary of Latino College Completion in 50 states synthesizes information on 50 state factsheets and builds on the national benchmarking guide. Each…

Latino College Completion: Minnesota

ERIC Educational Resources Information Center

Excelencia in Education (NJ1), 2012

2012-01-01

In 2009, Excelencia in Education launched the Ensuring America's Future initiative to inform, organize, and engage leaders in a tactical plan to increase Latino college completion. An executive summary of Latino College Completion in 50 states synthesizes information on 50 state factsheets and builds on the national benchmarking guide. Each…

Latino College Completion: New York

ERIC Educational Resources Information Center

Excelencia in Education (NJ1), 2012

2012-01-01

In 2009, Excelencia in Education launched the Ensuring America's Future initiative to inform, organize, and engage leaders in a tactical plan to increase Latino college completion. An executive summary of Latino College Completion in 50 states synthesizes information on 50 state factsheets and builds on the national benchmarking guide. Each…

Latino College Completion: Virginia

ERIC Educational Resources Information Center

Excelencia in Education (NJ1), 2012

2012-01-01

In 2009, Excelencia in Education launched the Ensuring America's Future initiative to inform, organize, and engage leaders in a tactical plan to increase Latino college completion. An executive summary of Latino College Completion in 50 states synthesizes information on 50 state factsheets and builds on the national benchmarking guide. Each…

Latino College Completion: West Virginia

ERIC Educational Resources Information Center

Excelencia in Education (NJ1), 2012

2012-01-01

In 2009, Excelencia in Education launched the Ensuring America's Future initiative to inform, organize, and engage leaders in a tactical plan to increase Latino college completion. An executive summary of Latino College Completion in 50 states synthesizes information on 50 state factsheets and builds on the national benchmarking guide. Each…

Latino College Completion: Pennsylvania

ERIC Educational Resources Information Center

Excelencia in Education (NJ1), 2012

2012-01-01

In 2009, Excelencia in Education launched the Ensuring America's Future initiative to inform, organize, and engage leaders in a tactical plan to increase Latino college completion. An executive summary of Latino College Completion in 50 states synthesizes information on 50 state factsheets and builds on the national benchmarking guide. Each…

Latino College Completion: Idaho

ERIC Educational Resources Information Center

Excelencia in Education (NJ1), 2012

2012-01-01

In 2009, Excelencia in Education launched the Ensuring America's Future initiative to inform, organize, and engage leaders in a tactical plan to increase Latino college completion. An executive summary of Latino College Completion in 50 states synthesizes information on 50 state factsheets and builds on the national benchmarking guide. Each…

Latino College Completion: New Hampshire

ERIC Educational Resources Information Center

Excelencia in Education (NJ1), 2012

2012-01-01

In 2009, Excelencia in Education launched the Ensuring America's Future initiative to inform, organize, and engage leaders in a tactical plan to increase Latino college completion. An executive summary of Latino College Completion in 50 states synthesizes information on 50 state factsheets and builds on the national benchmarking guide. Each…

Latino College Completion: Connecticut

ERIC Educational Resources Information Center

Excelencia in Education (NJ1), 2012

2012-01-01

In 2009, Excelencia in Education launched the Ensuring America's Future initiative to inform, organize, and engage leaders in a tactical plan to increase Latino college completion. An executive summary of Latino College Completion in 50 states synthesizes information on 50 state factsheets and builds on the national benchmarking guide. Each…

Latino College Completion: Hawaii

ERIC Educational Resources Information Center

Excelencia in Education (NJ1), 2012

2012-01-01

In 2009, Excelencia in Education launched the Ensuring America's Future initiative to inform, organize, and engage leaders in a tactical plan to increase Latino college completion. An executive summary of Latino College Completion in 50 states synthesizes information on 50 state factsheets and builds on the national benchmarking guide. Each…

Latino College Completion: Wisconsin

ERIC Educational Resources Information Center

Excelencia in Education (NJ1), 2012

2012-01-01

In 2009, Excelencia in Education launched the Ensuring America's Future initiative to inform, organize, and engage leaders in a tactical plan to increase Latino college completion. An executive summary of Latino College Completion in 50 states synthesizes information on 50 state factsheets and builds on the national benchmarking guide. Each…

Latino College Completion: New Mexico

ERIC Educational Resources Information Center

Excelencia in Education (NJ1), 2012

2012-01-01

In 2009, Excelencia in Education launched the Ensuring America's Future initiative to inform, organize, and engage leaders in a tactical plan to increase Latino college completion. An executive summary of Latino College Completion in 50 states synthesizes information on 50 state factsheets and builds on the national benchmarking guide. Each…

Processing Plan for Potentially Reactive/Ignitable Remote Handled Transuranic Waste at the Idaho Cleanup Project - 12090

DOE Office of Scientific and Technical Information (OSTI.GOV)

Troescher, Patrick D.; Hobbes, Tammy L.; Anderson, Scott A.

Remote Handle Transuranic (RH-TRU) Waste generated at Argonne National Laboratory - East, from the examination of irradiated and un-irradiated fuel pins and other reactor materials requires a detailed processing plan to ensure reactive/ignitable material is absent to meet WIPP Waste Acceptance Criteria prior to shipping and disposal. The Idaho Cleanup Project (ICP) approach to repackaging Lot 2 waste and how we ensure prohibited materials are not present in waste intended for disposal at Waste Isolation Pilot Plant 'WIPP' uses an Argon Repackaging Station (ARS), which provides an inert gas blanket. Opening of the Lot 2 containers under an argon gasmore » blanket is proposed to be completed in the ARS. The ARS is an interim transition repackaging station that provides a mitigation technique to reduce the chances of a reoccurrence of a thermal event prior to rendering the waste 'Safe'. The consequences, should another thermal event be encountered, (which is likely) is to package the waste, apply the reactive and or ignitable codes to the container, and store until the future treatment permit and process are available. This is the same disposition that the two earlier containers in the 'Thermal Events' were assigned. By performing the initial handling under an inert gas blanket, the waste can sorted and segregate the fines and add the Met-L-X to minimize risk before it is exposed to air. The 1-gal cans that are inside the ANL-E canister will be removed and each can is moved to the ARS for repackaging. In the ARS, the 1-gal can is opened in the inerted environment. The contained waste is sorted, weighed, and visually examined for non compliant items such as unvented aerosol cans and liquids. The contents of the paint cans are transferred into a sieve and manipulated to allow the fines, if any, to be separated into the tray below. The fines are weighed and then blended with a minimum 5:1 mix of Met-L-X. Other debris materials found are segregated from the cans into containers for later packaging. Recoverable fissile waste material (Fuel and fuel-like pieces) suspected of containing sodium bonded pieces) are segregated and will remain in the sieve or transferred to a similar immersion basket in the ARS. The fuel like pieces will be placed into a container with sufficient water to cover the recoverable fissile waste. If a 'reactive characteristic' is present the operator will be able to observe the formation of 'violent' hydrogen gas bubbles. When sodium bonded fuel-like pieces are placed in water the expected reaction is a non-violent reaction that does not meet the definition of reactivity. It is expected that there will be a visible small stream of bubbles present if there is any sodium-bonded fuel-like piece placed in the water. The test will be completed when there is no reaction or the expected reaction is observed..At that point, the fuel like pieces complete the processing cycle in preparation for characterization and shipment to WIPP. If a violent reaction occurs, the fuel-like pieces will be removed from the water, split into the required fissile material content, placed into a screened basket in a 1 gallon drum and drummed out of the hot cell with appropriate RCRA codes applied and placed into storage until sodium treatment is available. These 'violent' reactions will be evidenced by gas bubbles being evolved at the specimen surface where sodium metal is present. The operators will be trained to determine if the reaction is 'violent' or 'mild'. If a 'violent' reaction occurs, the sieve will be immediately removed from the water, placed in a 1 gallon paint can, canned in the argon cover gas and removed from the hot cell to await a future treatment. If the reaction is 'mild', the sieve will then be removed from the water; the material weighed for final packaging and allowed to dry by air exposure. Lot 2 waste cans can be opened, sorted, processed, and weighed while mitigating the potential of thermal events that could occur prior to exposing to air. Exposure to air is a WIPP compliance step demonstrating the absence of reactive or ignitable characteristics. (authors)« less

Development of a water-jet assisted laser paint removal process

NASA Astrophysics Data System (ADS)

Madhukar, Yuvraj K.; Mullick, Suvradip; Nath, Ashish K.

2013-12-01

The laser paint removal process usually leaves behind traces of combustion product i.e. ashes on the surface. An additional post-processing such as light-brushing or wiping by some mechanical means is required to remove the residual ash. In order to strip out the paint completely from the surface in a single step, a water-jet assisted laser paint removal process has been investigated. The 1.07 μm wavelength of Yb-fiber laser radiation has low absorption in water; therefore a high power fiber laser was used in the experiment. The laser beam was delivered on the paint-surface along with a water jet to remove the paint and residual ashes effectively. The specific energy, defined as the laser energy required removing a unit volume of paint was found to be marginally more than that for the gas-jet assisted laser paint removal process. However, complete paint removal was achieved with the water-jet assist only. The relatively higher specific energy in case of water-jet assist is mainly due to the scattering of laser beam in the turbulent flow of water-jet.

Questioning the wisdom of tubeless percutaneous nephrolithotomy (PCNL): a prospective randomized controlled study of early tube removal vs tubeless PCNL.

PubMed

Mishra, Shashikant; Sabnis, Ravindra B; Kurien, Abraham; Ganpule, Arvind; Muthu, Veeramani; Desai, Mahesh

2010-10-01

To establish the efficacy of early removal of a nephrostomy tube after percutaneous nephrolithotomy (PCNL), to challenge the wisdom of tubeless PCNL, as we hypothesized that it would result in a shorter hospital stay, comparable benefit and safety, while maintaining the option of check nephroscopy ensuring far superior stone clearance. In all, 22 patients were prospectively randomized equally into two groups, group 1 (early nephrostomy removal) or group 2 (tubeless) during a 1-month study period. Inclusion criteria for the study were: a simple stone of <3 cm, no significant bleeding, no perforation, single-tract access and 'on-table' complete stone clearance. In group 1, a 20 F nephrostomy, 6 F retrograde ureteric catheter and a Foley catheter were used, while in group 2 only a 6 F retrograde ureteric catheter and Foley catheter were placed at the end of the procedure. Computed tomography (CT) with no contrast medium was done on the first morning after surgery before removing all catheters/tubes, and patients discharged subsequently. The variables assessed were stone clearance, hospital stay, analgesic requirement, postoperative complications and auxiliary procedures. The mean (SD) stone bulk was similar between the groups, at 2737 (946.9) and 2934.2 (2090.7) µL, respectively. Despite an on-table complete clearance, clearance assessed by CT was nine of 11 vs eight of 11 in groups 1 and 2, respectively. CT showed a 6 mm stone in one patient in group 1, while the remaining patients had stones of <4 mm. The mean (SD) analgesic requirement, haemoglobin decrease, urine leak and hospital stay in the two groups were 72.7 (51.8) vs 68.2 (46.2) mg of tramadol (P= 0.25), 1.6 (0.7) vs 1.6 (0.9) g/dL (P= 0.39), 13.9 (6.3) vs 7.1 (14.2) h (P= 0.018) and 72.8 (2.1) vs 70.2 (18.5) h (P= 0.09), respectively. Complications noted were early haematuria in none vs three (P= 0.21), urinoma none vs one, and fever in two vs one, respectively; one patient in group 1 required a check nephroscopy for a residual fragment. Overall clearance including re-treatment was 10/11 vs eight of 11 (P= 0.009), respectively. Early tube removal after PCNL results in an equivalent analgesic requirement, decrease in haemoglobin and hospital stay as tubeless PCNL. It has a significantly lower incidence of early haematuria, better clearance rates and preserves the option of check nephroscopy. It can be considered as an accepted standard of care, with the preserved advantages of tubeless PCNL. © 2010 THE AUTHORS. JOURNAL COMPILATION © 2010 BJU INTERNATIONAL.

Telephone-based Assessments to Minimize Missing Data in Longitudinal Depression Trials: A Project IMPACTS Study Report

PubMed Central

Claassen, Cindy; Kurian, Ben; Trivedi, Madhukar H.; Grannemann, Bruce D.; Tuli, Ekta; Pipes, Ronny; Preston, Anne Marie; Flood, Ariell

2012-01-01

Purpose Missing data in clinical efficacy and effectiveness trials continue to be a major threat to the validity of study findings. The purpose of this report is to describe methods developed to ensure completion of outcome assessments with public mental health sector subjects participating in a longitudinal, repeated measures study for the treatment of major depressive disorder. We developed longitudinal assessment procedures that included telephone-based clinician interviews in order to minimize missing data commonly encountered with face-to-face assessment procedures. Methods A pre-planned, multi-step strategy was developed to ensure completeness of data collection. The procedure included obtaining multiple pieces of patient contact information at baseline, careful education of both staff and patients concerning the purpose of assessments, establishing good patient rapport, and finally being flexible and persistent with phone appointments to ensure the completion of telephone-based follow-up assessments. A well-developed administrative and organizational structure was also put in place prior to study implementation. Results The assessment completion rate for the primary outcome for 310 of 504 subjects who enrolled and completed 52 weeks (at the time of manuscript) of telephone-based follow-up assessments was 96.8%. Conclusion By utilizing telephone-based follow-up procedures and adapting our easy-to-use pre-defined multi-step approach, researchers can maximize patient data retention in longitudinal studies. PMID:18761427

Method for removing trace pollutants from aqueous solutions

DOEpatents

Silver, Gary L.

1986-01-01

A method of substantially removing a trace metallic contaminant from a liquid containing the same comprises, adding an oxidizing agent to a liquid containing a trace amount of a metallic contaminant of a concentration of up to about 10.sup.-1 ppm, the oxidizing agent being one which oxidizes the contaminant to form an oxidized product which is insoluble in the liquid and precipitates therefrom, and the conditions of the addition being selected to ensure that the precipitation of the oxidized product is homogeneous, and separating the homogeneously precipitated product from the liquid.

Control of infection in an international airline.

PubMed

Kelly, M

1993-05-01

The paper examines the possible sources of infection on an international aircraft, including the provision of food, the supply of drinking water, and the removal of waste. It considers aspects of control, and explains some of the steps which have to be taken by a major international carrier to ensure that the high quality expected by the customer is provided in all areas of the world, even those where natural resources and expertise may be limited. The emphasis is on providing a safe product, and removing any possible risk of infection of the passengers.

Development of Carbon Nanotube-Based Sensor to Monitor Crack Growth in Cracked Aluminum Structures Underneath Composite Patching

DTIC Science & Technology

2014-06-01

layer of epoxy and ensure crack is filled in. Let sit for at least 1 hour, but no longer than 3 hours. (Do not allow base layer to harden before...10 mmHg and hold for 8 hours. • Once hardened remove excess epoxy and test sample. C. TENSILE TESTING For the purpose of this study, total fracture...hardened remove excess epoxy and test sample. 2. Final Changes Changes were made from this initial sample preparation to the final one shown in the

An evaluation of a pre-scaling gel (SofScale) on the ease of supragingival calculus removal.

PubMed

Smith, S R; Foyle, D M; Daniels, J

1994-09-01

SofScale is a pre-scaling gel, containing disodium EDTA and sodium lauryl sulphate, which is claimed to soften calculus and therefore facilitate its removal. 31 subjects were treated in a double blind randomised placebo controlled split mouth study to evaluate this product. Test or placebo gels were applied to the lingual surfaces of the mandibular teeth for 4 min and the time taken to complete the removal of supragingival calculus recorded. The operator recorded on which side the calculus was considered easier to remove and the patient indicated how comfortable the scaling had been. The mean calculus index was 1.99 for the SofScale group and 1.97 for the placebo. The mean time taken to complete scaling was 5.31 min for both groups. Using the Student t-test, there were no statistically significant differences (p > 0.7) between either the calculus index or time taken to complete the scaling between the groups. The operator did not consider SofScale to facilitate calculus removal and patients did not find calculus removal more comfortable when SofScale had been used. There was no increased sensitivity in the SofScale group following scaling. The results of this study do not support the use of SofScale as an adjunct to scaling.

Ensuring Data Quality in Extension Research and Evaluation Studies

ERIC Educational Resources Information Center

Radhakrishna, Rama; Tobin, Daniel; Brennan, Mark; Thomson, Joan

2012-01-01

This article presents a checklist as a guide for Extension professionals to use in research and evaluation studies they carry out. A total of 40 statements grouped under eight data quality components--relevance, objectivity, validity, reliability, integrity, generalizability, completeness, and utility--are identified to ensure that research…

Elementary Mathematics Specialists: Ensuring the Intersection of Research and Practice

ERIC Educational Resources Information Center

McGatha, Maggie B.

2017-01-01

This paper provides a historical overview of the role and impact of elementary mathematics specialists as well as current implications and opportunities for the field. Furthermore, suggestions are offered for the mathematics education field for ensuring the intersection of practice and research. [For complete proceedings, see ED581294.

Dynamics of organic matter, nitrogen and phosphorus removal and their interactions in a tidal operated constructed wetland.

PubMed

Li, Chunyan; Wu, Shubiao; Dong, Renjie

2015-03-15

This paper demonstrates the potential of tidal flow operated constructed wetland application for the removal dynamics of organic matter, nitrogen and phosphorus. Near-complete removal of organic matter was achieved with a constant removal efficiency of 95%, irrespective of TOC influent loadings ranged from 10 g/m(2) · d to 700 g/m(2) · d. High NH4(+)-N removal at 95% efficiency under influent loading of 17 g/m(2) · d, was stably obtained and was not negatively influenced by increasing influent organic carbon loading rate. Increased influent TOC loading (350 g/m(2) · d to 700 g/m(2) · d) significantly enhanced denitrification capacity and increased TN removal from 30% to 95%. Under tidal flow operation, a higher carbon supply (C/N = 20) for complete TN removal was demonstrated as comparing to that observed in traditional CWs approaches. In addition, the removal of phosphorus was strongly influenced by organic loadings. However, further investigations are needed to elucidate the detailed mechanism that would explain the role of organic loading in phosphorus removal. Copyright © 2015 Elsevier Ltd. All rights reserved.

"Moral Panic": An Attorney's Perspective.

ERIC Educational Resources Information Center

Haas, Jeff L.

1994-01-01

Attempts to define the role of "expert" in child sexual abuse proceedings as making decisions in the child's best interest (despite moral panic) and ensuring that there is sufficient evidence of actual sexual abuse to support the drastic remedy of removing the child from his or her home. (JPS)

Safety in Riding Programs: A Director's Guide.

ERIC Educational Resources Information Center

Kpachavi, Teresa

1996-01-01

Camp riding programs should be examined regularly for liability and risk management issues. Elements of a basic safety assessment include requiring proper safety apparel, removing obstructions from riding rings, ensuring doors and gates are closed, requiring use of lead ropes, securing equine medications, banning smoking, posting written…

40 CFR 63.9631 - What are my monitoring requirements?

Code of Federal Regulations, 2010 CFR

2010-07-01

... maintain a bag leak detection system to monitor the relative change in particulate matter loadings... of ensuring the proper functioning of removal mechanisms. (3) Check the compressed air supply of... interior for air leaks. (8) Inspect fans for wear, material buildup, and corrosion through quarterly visual...

29 CFR 1926.62 - Lead.

Code of Federal Regulations, 2013 CFR

2013-07-01

... annually to reflect the current status of the program. (3) Mechanical ventilation. When ventilation is used... potentially harmful effects of exposure to lead. (vii)(A) The employer shall ensure that the containers of... remove lead from any surface unless the compressed air is used in conjunction with a ventilation system...

29 CFR 1926.62 - Lead.

Code of Federal Regulations, 2012 CFR

2012-07-01

... annually to reflect the current status of the program. (3) Mechanical ventilation. When ventilation is used... potentially harmful effects of exposure to lead. (vii)(A) The employer shall ensure that the containers of... remove lead from any surface unless the compressed air is used in conjunction with a ventilation system...

29 CFR 1926.62 - Lead.

Code of Federal Regulations, 2014 CFR

2014-07-01

... annually to reflect the current status of the program. (3) Mechanical ventilation. When ventilation is used... potentially harmful effects of exposure to lead. (vii)(A) The employer shall ensure that the containers of... remove lead from any surface unless the compressed air is used in conjunction with a ventilation system...

Removing Barriers to Learning

ERIC Educational Resources Information Center

Nealis, Libby Kuffner

2013-01-01

Specialized instructional support personnel (SISP) are part of a multidisciplinary education team that provides a wide range of school-based prevention and intervention services to help students become effective learners and productive citizens. They work with teachers, principals, and parents to ensure that all students are successful in school.…

78 FR 13097 - Electric Power Research Institute; Seismic Evaluation Guidance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-26

... outcrop motion for which the soil layers above the foundation elevation have been removed. Updating the... performing soil-structure interaction analyses. Consistent with guidance described in DC/COL-ISG-017, ``Ensuring Hazard-Consistent Seismic Input for Site Response and Soil Structure Interaction Analyses,'' the...

Explaining the apparent resiliency of loblolly pine plantation to organic matter removal

Treesearch

Jeff A. Hatten; Eric B. Surce; Zakiya Leggett; Jason Mack; Scott D. Roberts; Janet Dewey; Brian Strahm

2015-01-01

We utilized 15-year measurements from an organic matter manipulation experiment in a loblolly pine plantation in the Upper Coastal Plain of Alabama to examine the apparent resiliency of a loblolly pine stand to organic matter removal. Treatments included complete removal of harvest residues and forest floor (removed), doubling of harvest residues and forest floor (...

Removal of irrelevant information from working memory: sometimes fast, sometimes slow, and sometimes not at all.

PubMed

Oberauer, Klaus

2018-03-12

To function properly, working memory must be rapidly updated. Updating requires the removal of information no longer relevant. I present six experiments designed to explore the boundary conditions and the time course of removal. A condition in which three out of six memory items can be removed was compared to two baseline conditions in which either three or six items were encoded and maintained in working memory. The time for removal was varied. In experiment 1, in the removal condition, a distinct subset of three words was cued to be irrelevant after encoding all six words. With longer removal time, response times in the removal condition approximated those in the set-size 3 baseline, but accuracies stayed at the set-size 6 level. In experiment 2, in which a random subset of three words was cued as irrelevant, there was no evidence for removal. Experiments 3 and 4 showed that when each item is cued as relevant or irrelevant after its encoding, irrelevant items can be removed rapidly and completely. Experiments 5 and 6 showed that complete removal was no longer possible when words had to be processed before being cued as irrelevant. The pattern of findings can be explained by distinguishing two forms of removal: deactivation removes working-memory contents from the set of competitors for retrieval; unbinding contents from their contexts removes them from working memory entirely, so that they also cease to compete for limited capacity. © 2018 New York Academy of Sciences.

300 GPM Solids Removal System A True Replacement for Back Flushable Powdered Filter Systems - 13607

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ping, Mark R.; Lewis, Mark

2013-07-01

The EnergySolutions Solids Removal System (SRS) utilizes stainless steel cross-flow ultra-filtration (XUF) technology which allows it to reliably remove suspended solids greater than one (1) micron from liquid radwaste streams. The SRS is designed as a pre-treatment step for solids separation prior to processing through other technologies such as Ion Exchange Resin (IER) and/or Reverse Osmosis (RO), etc. Utilizing this pre-treatment approach ensures successful production of reactor grade water while 1) decreasing the amount of radioactive water being discharged to the environment; and 2) decreasing the amount of radioactive waste that must ultimately be disposed of due to the eliminationmore » of spent powdered filter media. (authors)« less

Effect of Bisphenol A on the extremophilic microalgal strain Picocystis sp. (Chlorophyta) and its high BPA removal ability.

PubMed

Ben Ouada, Sabrine; Ben Ali, Rihab; Leboulanger, Christophe; Ben Ouada, Hatem; Sayadi, Sami

2018-08-30

Bisphenol A (BPA) effects and removal by an alkaliphilic chlorophyta, Picocystis, were assessed. BPA at low concentrations (0-25 mg L -1 ) did not inhibit the Picocystis growth and photosynthesis during 5 days of exposure. At higher BPA concentrations (50 and 75 mg L -1 ), the growth inhibition did not exceed 43%. The net photosynthetic activity was dramatically reduced at high BPA concentrations while, the PSII activity was less affected. The exposure to increasing BPA concentrations induced an oxidative stress in Picocystis cells, as evidenced by increased malondialdehyde content and the over-expression of antioxidant activities (ascorbate peroxydase, gluthation-S-transferase and catalase). Picocystis exhibited high BPA removal efficiency, reaching 72% and 40% at 25 and 75 mg L -1 BPA. BPA removal was ensured mainly by biodegradation/biotransformation processes. Based on these results, the extended tolerance and the high removal ability of Picocystis make her a promising specie for use in BPA bioremediation. Copyright © 2018. Published by Elsevier Inc.

Health and safety plan for the removal action at the former YS-860 Firing Ranges, Oak Ridge Y-12 Plant, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-03-24

This health and safety plan sets forth the requirements and procedures to protect the personnel involved in the removal action project at the former YS-860 Firing Ranges. This project will be conducted in a manner that ensures the protection of the safety and health of workers, the public, and the environment. The purpose of this removal action is to address lead-contaminated soil and reduce a potential risk to human health and the environment. This site is an operable unit within the Upper East Fork Poplar Creek watershed. The removal action will contribute to early source actions within the watershed. Themore » project will accomplish this through the removal of lead-contaminated soil in the target areas of the two small arms firing ranges. The primary hazards include temperature extremes, equipment operation, noise, potential lead exposure, uneven and slippery working surfaces, and insects.« less

Assessing distribution of migratory fishes and connectivity following complete and partial dam removals in a North Carolina River

USGS Publications Warehouse

Raabe, Joshua K.; Hightower, Joseph E.

2014-01-01

Fish, especially migratory species, are assumed to benefit from dam removals that restore connectivity and access to upstream habitat, but few studies have evaluated this assumption. Therefore, we assessed the movement of migratory fishes in the springs of 2008 through 2010 and surveyed available habitat in the Little River, North Carolina, a tributary to the Neuse River, after three complete dam removals and one partial (notched) dam removal. We tagged migratory fishes with PIT tags at a resistance-board weir located at a dam removal site (river kilometer [rkm] 3.7) and followed their movements with an array of PIT antennas. The river-wide distribution of fish following removals varied by species. For example, 24–31% of anadromous American Shad Alosa sapidissima, 45–49% of resident Gizzard Shad Dorosoma cepedianum, and 4–11% of nonnative Flathead CatfishPylodictis olivaris passed the dam removal site at rkm 56 in 2009 and 2010. No preremoval data were available for comparison, but reach connectivity appeared to increase as tagged individuals passed former dam sites and certain individuals moved extensively both upstream and downstream. However, 17–28% did not pass the partially removed dam at rkm 7.9, while 20–39% of those that passed remained downstream for more than a day before migrating upstream. Gizzard Shad required the deepest water to pass this notched structure, followed by American Shad then Flathead Catfish. Fish that passed the notched dam accessed more complex habitat (e.g., available substrate size-classes) in the middle and upper reaches. The results provide strong support for efforts to restore currently inaccessible habitat through complete removal of derelict dams.

Community- and landscape-level responses of reptiles and small mammals to feral-horse grazing in the Great Basin

USGS Publications Warehouse

Beever, Erik A.; Brussard, P.F.

2004-01-01

We investigated species- and community-level responses of squamate reptiles and granivorous small mammals to feral-horse grazing in two elevational strata across nine mountain ranges of the western Great Basin, USA. Although mammal species richness did not differ between horse-occupied and horse-removed sites, occupied sites possessed less community completeness (biotic integrity) and 1.1–7.4 times greater deer mice (Peromyscus maniculatus) than removed sites. In opposite fashion, horse-removed sites possessed greater reptile species richness and tended towards greater abundance for seven of nine species, yet unequal species pools across sites dictated that community completeness did not differ statistically between horse-removed and -occupied sites.

Improving material removal determinacy based on the compensation of tool influence function

NASA Astrophysics Data System (ADS)

Zhong, Bo; Chen, Xian-hua; Deng, Wen-hui; Zhao, Shi-jie; Zheng, Nan

2018-03-01

In the process of computer-controlled optical surfacing (CCOS), the key of correcting the surface error of optical components is to ensure the consistency between the simulated tool influence function and the actual tool influence function (TIF). The existing removal model usually adopts the fixed-point TIF to remove the material with the planning path and velocity, and it considers that the polishing process is linear and time invariant. However, in the actual polishing process, the TIF is a function related to the feed speed. In this paper, the relationship between the actual TIF and the feed speed (i.e. the compensation relationship between static removal and dynamic removal) is determined by experimental method. Then, the existing removal model is modified based on the compensation relationship, to improve the conformity between simulated and actual processing. Finally, the surface error modification correction test are carried out. The results show that the fitting degree of the simulated surface and the experimental surface is better than 88%, and the surface correction accuracy can be better than 1/10 λ (Λ=632.8nm).

Fibre tip pH sensor for tumor detection during surgery

NASA Astrophysics Data System (ADS)

Henderson, Matthew R.; Schartner, Erik P.; Callen, David F.; Gill, P. Grantley; Monro, Tanya M.

2015-05-01

Surgery on tumours commonly involves a lumpectomy method, where a section of tissue containing the tumour is removed, to improve cosmetic outcomes and quality of life. Following surgery, the margins of the removed section are checked by pathology tests to ensure that the entire tumour has been removed. Unfortunately, approximately 15-20% of margins show incomplete removal and require a subsequent operation to remove the remaining tumour. Tumour detection during surgery could allow the removed section to be enlarged appropriately, reducing the likelihood of requiring subsequent surgery. A change in the extracellular pH in the vicinity of a tumour, when compared to normal tissue, has been shown previously in literature. We have fabricated an optical fibre tip pH sensor by embedding a fluorophore within a photopolymerised acrylamide polymer on the tip of a 200 micron diameter silica fibre. Preliminary measurements of human melanoma samples have shown a significant difference in the measured pH values between tumour and normal tissue. This demonstration paves to way to highly accurate margin detection during surgery.

Impacts from Partial Removal of Decommissioned Oil and Gas Platforms on Fish Biomass and Production on the Remaining Platform Structure and Surrounding Shell Mounds

PubMed Central

Claisse, Jeremy T.; Pondella, Daniel J.; Love, Milton; Zahn, Laurel A.; Williams, Chelsea M.; Bull, Ann S.

2015-01-01

When oil and gas platforms become obsolete they go through a decommissioning process. This may include partial removal (from the surface to 26 m depth) or complete removal of the platform structure. While complete removal would likely eliminate most of the existing fish biomass and associated secondary production, we find that the potential impacts of partial removal would likely be limited on all but one platform off the coast of California. On average 80% of fish biomass and 86% of secondary fish production would be retained after partial removal, with above 90% retention expected for both metrics on many platforms. Partial removal would likely result in the loss of fish biomass and production for species typically found residing in the shallow portions of the platform structure. However, these fishes generally represent a small proportion of the fishes associated with these platforms. More characteristic of platform fauna are the primarily deeper-dwelling rockfishes (genus Sebastes). “Shell mounds” are biogenic reefs that surround some of these platforms resulting from an accumulation of mollusk shells that have fallen from the shallow areas of the platforms mostly above the depth of partial removal. We found that shell mounds are moderately productive fish habitats, similar to or greater than natural rocky reefs in the region at comparable depths. The complexity and areal extent of these biogenic habitats, and the associated fish biomass and production, will likely be reduced after either partial or complete platform removal. Habitat augmentation by placing the partially removed platform superstructure or some other additional habitat enrichment material (e.g., rock boulders) on the seafloor adjacent to the base of partially removed platforms provides additional options to enhance fish production, potentially mitigating reductions in shell mound habitat. PMID:26332384

Removal of oxyfluorfen from ex-situ soil washing fluids using electrolysis with diamond anodes.

PubMed

dos Santos, Elisama Vieira; Sáez, Cristina; Martínez-Huitle, Carlos Alberto; Cañizares, Pablo; Rodrigo, Manuel Andres

2016-04-15

In this research, firstly, the treatment of soil spiked with oxyfluorfen was studied using a surfactant-aided soil-washing (SASW) process. After that, the electrochemical treatment of the washing liquid using boron doped diamond (BDD) anodes was performed. Results clearly demonstrate that SASW is a very efficient approach in the treatment of soil, removing the pesticide completely by using dosages below 5 g of sodium dodecyl sulfate (SDS) per Kg of soil. After that, complete mineralization of organic matter (oxyflourfen, SDS and by-products) was attained (100% of total organic carbon and chemical oxygen demand removals) when the washing liquids were electrolyzed using BDD anodes, but the removal rate depends on the size of the particles in solution. Electrolysis of soil washing fluids occurs via the reduction in size of micelles until their complete depletion. Lower concentrations of intermediates are produced (sulfate, chlorine, 4-(trifluoromethyl)-phenol and ortho-nitrophenol) during BDD-electrolyzes. Finally, it is important to indicate that, sulfate (coming from SDS) and chlorine (coming from oxyfluorfen) ions play an important role during the electrochemical organic matter removal. Copyright © 2016 Elsevier Ltd. All rights reserved.

An anaerobic membrane bioreactor - membrane distillation hybrid system for energy recovery and water reuse: Removal performance of organic carbon, nutrients, and trace organic contaminants.

PubMed

Song, Xiaoye; Luo, Wenhai; McDonald, James; Khan, Stuart J; Hai, Faisal I; Price, William E; Nghiem, Long D

2018-07-01

In this study, a direct contact membrane distillation (MD) unit was integrated with an anaerobic membrane bioreactor (AnMBR) to simultaneously recover energy and produce high quality water for reuse from wastewater. Results show that AnMBR could produce 0.3-0.5L/g COD added biogas with a stable methane content of approximately 65%. By integrating MD with AnMBR, bulk organic matter and phosphate were almost completely removed. The removal of the 26 selected trace organic contaminants by AnMBR was compound specific, but the MD process could complement AnMBR removal, leading to an overall efficiency from 76% to complete removal by the integrated system. The results also show that, due to complete retention, organic matter (such as humic-like and protein-like substances) and inorganic salts accumulated in the MD feed solution and therefore resulted in significant fouling of the MD unit. As a result, the water flux of the MD process decreased continuously. Nevertheless, membrane pore wetting was not observed throughout the operation. Crown Copyright © 2018. Published by Elsevier B.V. All rights reserved.

22 CFR 94.3 - Functions of the Central Authority.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Section 94.3 Foreign Relations DEPARTMENT OF STATE LEGAL AND RELATED SERVICES INTERNATIONAL CHILD.... state authorities to secure the prompt location and return of children wrongfully removed to or retained in any Contracting State, to ensure that rights of custody and access under the laws of one...

77 FR 32465 - Technical Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-01

... minimum odds for Class II games; amend standards for test labs; remove references to the Federal... the Play of Class II Games. 73 FR 60508. The rule added a new part to the Commission's regulations establishing a process for ensuring the integrity of electronic Class II games and aids. The standards were...

40 CFR 142.306 - What are the responsibilities of the public water system, State and the Administrator in ensuring...

Code of Federal Regulations, 2010 CFR

2010-07-01

... meets the source water quality requirements for installing the small system variance technology...: (i) The quality of the source water for the public water system; and (ii) Removal efficiencies and expected useful life of the small system variance technology. ...

40 CFR 142.306 - What are the responsibilities of the public water system, State and the Administrator in ensuring...

Code of Federal Regulations, 2011 CFR

2011-07-01

... meets the source water quality requirements for installing the small system variance technology...: (i) The quality of the source water for the public water system; and (ii) Removal efficiencies and expected useful life of the small system variance technology. ...

7 CFR 982.453 - Disposition of substandard hazelnuts.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Disposition of substandard hazelnuts. 982.453 Section... GROWN IN OREGON AND WASHINGTON Administrative Rules and Regulations § 982.453 Disposition of substandard... approved list when such denial or removal is deemed necessary to ensure control over disposition of...

Equal Employment Opportunity

Science.gov Websites

personnel decisions be made free of discrimination on the basis of race, color, religion, sex, national to take appropriate steps to ensure that all employment decisions are free from discrimination. It Rehabilitation Act programs, which include periodic agency self-assessments and the removal of barriers to free

9 CFR 3.75 - Housing facilities, general.

Code of Federal Regulations, 2011 CFR

2011-01-01

.... Hard surfaces with which nonhuman primates come in contact must be spot-cleaned daily and sanitized in... must be raked or spot-cleaned with sufficient frequency to ensure all animals the freedom to avoid contact with excreta. Contaminated material must be removed or replaced whenever raking and spot cleaning...

9 CFR 3.75 - Housing facilities, general.

Code of Federal Regulations, 2014 CFR

2014-01-01

.... Hard surfaces with which nonhuman primates come in contact must be spot-cleaned daily and sanitized in... must be raked or spot-cleaned with sufficient frequency to ensure all animals the freedom to avoid contact with excreta. Contaminated material must be removed or replaced whenever raking and spot cleaning...

9 CFR 3.75 - Housing facilities, general.

Code of Federal Regulations, 2013 CFR

2013-01-01

.... Hard surfaces with which nonhuman primates come in contact must be spot-cleaned daily and sanitized in... must be raked or spot-cleaned with sufficient frequency to ensure all animals the freedom to avoid contact with excreta. Contaminated material must be removed or replaced whenever raking and spot cleaning...

Reversible Nut With Engagement Indication

NASA Technical Reports Server (NTRS)

Wright, Jay M.

1995-01-01

Document describes nut allowing fastener inserted or removed from either side by simply sliding fastener in or out. Detents on each face of nut, when pushed in, ensure positive engagement of threads. Followed by conventional clockwise turning to lock and counterclockwise turning to unlock nut. Detents, when viewed, show whether nut in positive lock.

Genetic Engineering: The Modification of Man

ERIC Educational Resources Information Center

Sinsheimer, Robert L.

1970-01-01

Describes somatic and genetic manipulations of individual genotypes, using diabetes control as an example of the first mode that is potentially realizable be derepression or viral transduction of genes. Advocates the use of genetic engineering of the second mode to remove man from his biological limitations, but offers maxims to ensure the…

46 CFR 151.04-5 - Inspection for certification.

Code of Federal Regulations, 2014 CFR

2014-10-01

... external examination of the tank is not possible because of insulation, the owner shall ensure that— (1) The amount of insulation deemed necessary by the marine inspector is removed during each cargo tank internal inspection to allow spot external examination of the tanks and insulation; or (2) The thickness of...

Taking the Steam off Pressure Groups.

ERIC Educational Resources Information Center

Ledell, Marjorie A.

1993-01-01

School administrators must speak out when single-issue or "stealth" groups threaten to take over a school board. Administrators can help ensure that election campaigns stimulate community debate, discussion, and consensus about educational directions. They must know how to remove the cover from stealth candidates, respond to the public,…

The Differences in Information Seeking Behavior between Distance and Residential Doctoral Students

ERIC Educational Resources Information Center

Brahme, Maria E.

2010-01-01

Librarians have historically been responsible for the organization and management of the stores of human knowledge, and for ensuring information literacy among researchers. In recent years, however, librarians have become disintermediated (Boyd-Byrnes & Rosenthal,2005) or, removed from, researchers and the research process for a variety of…

30 CFR 47.41 - Requirement for container labels.

Code of Federal Regulations, 2011 CFR

2011-07-01

... replace an outdated label when a revised label is received from the chemical's manufacturer or supplier... container labels. (a) The operator must ensure that each container of a hazardous chemical has a label. If a... unreadable. (2) The operator must not remove or deface existing labels on containers of hazardous chemicals...

30 CFR 47.41 - Requirement for container labels.

Code of Federal Regulations, 2014 CFR

2014-07-01

... replace an outdated label when a revised label is received from the chemical's manufacturer or supplier... container labels. (a) The operator must ensure that each container of a hazardous chemical has a label. If a... unreadable. (2) The operator must not remove or deface existing labels on containers of hazardous chemicals...

30 CFR 47.41 - Requirement for container labels.

Code of Federal Regulations, 2013 CFR

2013-07-01

... replace an outdated label when a revised label is received from the chemical's manufacturer or supplier... container labels. (a) The operator must ensure that each container of a hazardous chemical has a label. If a... unreadable. (2) The operator must not remove or deface existing labels on containers of hazardous chemicals...

30 CFR 47.41 - Requirement for container labels.

Code of Federal Regulations, 2012 CFR

2012-07-01

... replace an outdated label when a revised label is received from the chemical's manufacturer or supplier... container labels. (a) The operator must ensure that each container of a hazardous chemical has a label. If a... unreadable. (2) The operator must not remove or deface existing labels on containers of hazardous chemicals...

76 FR 58424 - Transmission Relay Loadability Reliability Standard

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-21

... Protection Systems 2. Protective relays are devices that detect and initiate the removal of faults [[Page... protective relay detects a fault on an element of the system under its protection, it sends a signal to an... distribution providers to set load-responsive phase protection relays according to specific criteria to ensure...

49 CFR 193.2173 - Water removal.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Water removal. 193.2173 Section 193.2173...: FEDERAL SAFETY STANDARDS Design Impoundment Design and Capacity § 193.2173 Water removal. (a) Impoundment areas must be constructed such that all areas drain completely to prevent water collection. Drainage...

49 CFR 193.2173 - Water removal.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Water removal. 193.2173 Section 193.2173...: FEDERAL SAFETY STANDARDS Design Impoundment Design and Capacity § 193.2173 Water removal. (a) Impoundment areas must be constructed such that all areas drain completely to prevent water collection. Drainage...

49 CFR 193.2173 - Water removal.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 3 2014-10-01 2014-10-01 false Water removal. 193.2173 Section 193.2173...: FEDERAL SAFETY STANDARDS Design Impoundment Design and Capacity § 193.2173 Water removal. (a) Impoundment areas must be constructed such that all areas drain completely to prevent water collection. Drainage...

49 CFR 193.2173 - Water removal.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 3 2012-10-01 2012-10-01 false Water removal. 193.2173 Section 193.2173...: FEDERAL SAFETY STANDARDS Design Impoundment Design and Capacity § 193.2173 Water removal. (a) Impoundment areas must be constructed such that all areas drain completely to prevent water collection. Drainage...

49 CFR 193.2173 - Water removal.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Water removal. 193.2173 Section 193.2173...: FEDERAL SAFETY STANDARDS Design Impoundment Design and Capacity § 193.2173 Water removal. (a) Impoundment areas must be constructed such that all areas drain completely to prevent water collection. Drainage...

Comparative Mirror Cleaning Study: 'A Study on Removing Particulate Contamination'

NASA Technical Reports Server (NTRS)

Houston, Karrie

2007-01-01

The cleanliness of optical surfaces is recognized as an industry-wide concern for the performance of optical devices such as mirrors and telescopes, microscopes and lenses, lasers and interferometers, and prisms and optical filters. However, no standard has been established for optical cleaning and there is no standard definition of a 'clean' optical element. This study evaluates the effectiveness of commonly used optical cleaning techniques based on wafer configuration, contamination levels, and the number and size of removed particles. It is concluded that cleaning method and exposure time play a significant factor in obtaining a high removal percentage. The detergent bath and solvent rinse method displayed an increase in effective removal percentage as the contamination exposure increased. Likewise, CO2 snow cleaning showed a relatively consistent cleaning effectiveness. The results can help ensure mission success to flight projects developed for the NASA Origins Program. Advantages and disadvantages of each of the optical cleaning methods are described.

GSDO Crawler Tread Removal

NASA Image and Video Library

2014-03-28

CAPE CANAVERAL, Fla. – Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, a portion of the treads on the C truck of crawler-transporter 2, or CT-2, have been removed from the vehicle. The treads are being removed in order to gain access to remove the gear boxes. Work continues in high bay 2 to upgrade CT-2. The modifications are designed to ensure CT-2’s ability to transport launch vehicles currently in development, such as the agency’s Space Launch System, to the launch pad. The Ground Systems Development and Operations Program office at Kennedy is overseeing the upgrades. For more than 45 years the crawler-transporters were used to transport the mobile launcher platform and the Apollo-Saturn V rockets and, later, space shuttles to Launch Pads 39A and B. For more information, visit: http://www.nasa.gov/exploration/systems/ground/crawler-transporter. Photo credit: NASA/Dimitri Gerondidakis

Symptomatic iliofemoral deep venous thrombosis treated with hybrid operative thrombectomy.

PubMed

Rodríguez, Limael E; Aponte-Rivera, Francisco; Figueroa-Vicente, Ricardo; Bolanos-Avila, Guillermo E; Martínez-Trabal, Jorge L

2015-10-01

During the past 15 years, strategies that promote immediate and complete thrombus removal have gained popularity for the treatment of acute-onset iliofemoral deep venous thrombosis. In this case report, we describe a novel operative approach to venous thrombus removal known as hybrid operative thrombectomy. The technique employs a direct inguinal approach with concomitant retrograde advancement of a balloon catheter by femoral venotomy. Moreover, it provides effective thrombus removal through a single incision, with or without stent placement, and has the advantage of a completion venogram. Copyright © 2015 Society for Vascular Surgery. Published by Elsevier Inc. All rights reserved.

Vinegar-amended anaerobic biosand filter for the removal of arsenic and nitrate from groundwater.

PubMed

Snyder, Kathryn V; Webster, Tara M; Upadhyaya, Giridhar; Hayes, Kim F; Raskin, Lutgarde

2016-04-15

The performance of a vinegar-amended anaerobic biosand filter was evaluated for future application as point-of-use water treatment in rural areas for the removal of arsenic and nitrate from groundwater containing common ions. Due to the importance of sulfate and iron in arsenic removal and their variable concentrations in groundwater, influent sulfate and iron concentrations were varied. Complete removal of influent nitrate (50 mg/L) and over 50% removal of influent arsenic (200 μg/L) occurred. Of all conditions tested, the lowest median effluent arsenic concentration was 88 μg/L. Iron removal occurred completely when 4 mg/L was added, and sulfate concentrations were lowered to a median concentration <2 mg/L from influent concentrations of 22 and 50 mg/L. Despite iron and sulfate removal and the establishment of reducing conditions, arsenic concentrations remained above the World Health Organization's arsenic drinking water standard. Further research is necessary to determine if anaerobic biosand filters can be improved to meet the arsenic drinking water standard and to evaluate practical implementation challenges. Copyright © 2016. Published by Elsevier Ltd.

Meeting Policymakers' Education Responsibilities Requires Cross-State Data Collaboration, Sharing, and Comparability. Breaking down State Silos

ERIC Educational Resources Information Center

Data Quality Campaign, 2012

2012-01-01

States have responsibilities to ensure that transferring students receive uninterrupted education and services, produce indicators that provide a complete picture, and ensure that information is comparable across states. However, states' and districts' ability to meet these responsibilities requires data capacity that can be undermined due to…

Rotator cuff preservation in arthroscopic treatment of calcific tendinitis.

PubMed

Maier, Dirk; Jaeger, Martin; Izadpanah, Kaywan; Bornebusch, Lutz; Suedkamp, Norbert Paul; Ogon, Peter

2013-05-01

We sought to evaluate (1) clinical and radiologic results after arthroscopic calcific deposit (CD) removal and (2) the relevance of remnant calcifications (RCs). The study included 102 patients undergoing arthroscopic CD removal, preserving integrity of the rotator cuff. Postoperatively, we divided patients into 2 groups according to the extent of CD removal achieved. Group 1 consisted of patients with complete CD removal. Group 2 included patients showing minor RCs. Ninety-three patients (99 shoulders) completed follow-up. The mean patient age was 50.6 years (31 to 68 years), and the mean follow-up period was 37.3 months (24 to 83 months). We obtained anteroposterior (AP) and outlet radiographs before surgery, postoperatively, and at follow-up. We used the absolute and age- and sex-related Constant scores (CSabs, CSrel) as outcome measures. We compared both groups statistically (Mann-Whitney U test; P < .05). Complete CD removal was achieved in 82 of 99 (82.8%) shoulders (group 1). Postoperatively, minor RCs were found in 17 of 99 (17.2%) shoulders (group 2), an average of 58.6% (± 26.2) of the mean preoperative size. All RCs showed complete (14 of 17) or virtually complete (3 of 17) resolution at follow-up. Overall mean CSabs and CSrel were 88.8 points (± 10.4) and 99.0% (± 3.7), respectively. Mean values of CSabs and CSrel in group 1 (89.5 points ± 9.5 and 99.1% ± 3.7, respectively) and group 2 (86.1 points ± 12.9 and 98.7% ± 4.2, respectively) did not differ. Arthroscopic CD removal, preserving integrity of the rotator cuff yielded good to excellent results in 90% of patients and avoided iatrogenic tendon defects in all patients. Minor RCs did not impair clinical outcome and spontaneously resolved at follow-up. Level IV, therapeutic case series. Copyright © 2013 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Health and safety plan for the removal action at the former YS-860 Firing Ranges, Oak Ridge Y-12 Plant, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-04-28

This health and safety plan sets forth the requirements and procedures to protect the personnel involved in the Lead Source Removal Project at the Former YS-86O Firing Ranges. This project will be conducted in a manner that ensures the protection of the safety and health of workers, the public, and the environment. The purpose of this removal action is to address lead contaminated soil and reduce a potential risk to human health and the environment. This site is an operable unit within the Upper East Fork Poplar Creek watershed. The removal action will contribute to early source actions within themore » watershed. The project will accomplish this through the removal of lead-contaminated soil in the target areas of the two small arms firing ranges. This plan covers the removal actions at the Former YS-86O Firing Ranges. These actions involve the excavation of lead-contaminated soils, the removal of the concrete trench and macadam (asphalt) paths, verification/confirmation sampling, grading and revegetation. The primary hazards include temperature extremes, equipment operation, noise, potential lead exposure, uneven and slippery working surfaces, and insects.« less

Evaluation of complete streets policy implementation by metropolitan planning organizations.

DOT National Transportation Integrated Search

2015-09-01

Over the last ten years, communities around the country have begun to implement comprehensive reforms : designed to ensure that roadway users of all ages and abilities can safely utilize the transportation system. : This complete streets policy frame...

One-step partial or complete caries removal and bonding with antibacterial or traditional self-etch adhesives: study protocol for a randomized controlled trial.

PubMed

Villat, Cyril; Attal, Jean-Pierre; Brulat, Nathalie; Decup, Franck; Doméjean, Sophie; Dursun, Elisabeth; Fron-Chabouis, Hélène; Jacquot, Bruno; Muller Bolla, Michèle; Plasse-Pradelle, Nelly; Roche, Laurent; Maucort-Boulch, Delphine; Nony, Patrice; Gritsch, Kerstin; Millet, Pierre; Gueyffier, François; Grosgogeat, Brigitte

2016-08-15

Current concepts in conservative dentistry advocate minimally invasive dentistry and pulp vitality preservation. Moreover, complete removal of carious dentin in deep carious lesions often leads to pulp exposure and root canal treatment, despite the absence of irreversible pulp inflammation. For years, partial caries removal has been performed on primary teeth, but little evidence supports its effectiveness for permanent teeth. Furthermore, the recent development of new antibacterial adhesive systems could be interesting in the treatment of such lesions. The objectives of this study are to compare the effectiveness of partial versus complete carious dentin removal in deep lesions (primary objective) and the use of an antibacterial versus a traditional two-step self-etch adhesive system (main secondary objective). The DEep CAries Treatment (DECAT) study protocol is a multicenter, randomized, controlled superiority trial comparing partial versus complete caries removal followed by adhesive restoration. The minimum sample size required is 464 patients. Two successive randomizations will be performed (allocation ratio 1:1): the first for the type of excavation (partial versus complete) and the second (if no root canal treatment is required) for the type of adhesive (antibacterial versus traditional). For the two objectives, the outcome is the success of the treatment after 1 year, measured according to a composite outcome of five FDI criteria: material fracture and retention, marginal adaptation, radiographic examination (including apical pathologies), postoperative sensitivity and tooth vitality, and carious lesion recurrence. The study will investigate the interest of a conservative approach for the management of deep carious lesions in terms of dentin excavation and bioactive adhesive systems. The results may help practitioners achieve the most efficient restorative procedure to maintain pulp vitality and increase the restoration longevity. ClinicalTrials.gov Identifier NCT02286388 . Registered in November 2014.

Computerized controlled-substance surveillance: application involving automated storage and distribution cabinets.

PubMed

Wellman, G S; Hammond, R L; Talmage, R

2001-10-01

A secondary data-reporting system used to scan the archives of a hospital's automated storage and distribution cabinets (ASDCs) for indications of controlled-substance diversion is described. ASDCs, which allow access to multiple doses of the same medication at one time, use drug count verification to ensure complete audits and disposition tracking. Because an ASDC may interpret inappropriate removal of a medication as a normal transaction, users of ASDCs should have a comprehensive plan for detecting and investigating controlled-substance diversion. Monitoring for and detecting diversion can be difficult and time-consuming, given the limited report-generating features of many ASDCs. Managers at an 800-bed hospital used report-writing software to address these problems. This application interfaces with the hospital's computer system and generates customized reports. The monthly activity recapitulation report lists each user of the ASDCs and gives a summary of all the controlled-substance transactions for those users for the time period specified. The monthly summary report provides the backbone of the surveillance system and identifies situations that require further audit and review. This report provides a summary of each user's activity for a specific medication for the time period specified. The detailed summary report allows for efficient review of specific transactions before there is a decision to conduct a chart review. This report identifies all ASDC controlled-substance transactions associated with a user. A computerized report-generating system identifies instances of inappropriate removal of controlled substances from a hospital's ASDCs.

Comparative evaluation of apically extruded debris with V-Taper, ProTaper Next, and the Self-adjusting File systems.

PubMed

Vyavahare, Nishant K; Raghavendra, Srinidhi Surya; Desai, Niranjan N

2016-01-01

Complete cleaning of the root canal is the goal for ensuring success in endodontics. Removal of debris plays an important role in achieving this goal. In spite of advancements in instrument design, apical extrusion of debris remains a source of inflammation in the periradicular region. To comparatively evaluate the amount of apically extruded debris with V-Taper, ProTaper Next, and the self-adjusting File (SAF) system. Sixty-four extracted human mandibular teeth with straight root canals were taken. Access openings were done and working length determined. The samples were randomly divided into three groups: Group I - V-Taper files (n = 20), Group II - ProTaper Next (n = 20), Group III - SAF (n = 20). Biomechanical preparation was completed and the debris collected in vials to be quantitatively determined. The data obtained was statistically analyzed using ANOVA and post hoc Tukey's test. All the specimens showed apical debris extrusion. SAF showed significantly less debris extrusion compared to V-Taper and ProTaper Next (P < 0.001). Among Groups I and II, ProTaper Next showed lesser debris extrusion as compared to V-Taper, but it was not significant (P = 0.124). The SAF showed least amount of apical debris extrusion when compared to newer rotary endodontic instruments. This indicates that the incidence of inter-treatment flare-ups due to debris extrusion would be less with the SAF.

Development of an on-line exposure system to determine freshly produced diesel engine emission-induced cellular effects.

PubMed

Oostingh, Gertie J; Papaioannou, Eleni; Chasapidis, Leonidas; Akritidis, Theofylaktos; Konstandopoulos, Athanasios G; Duschl, Albert

2013-09-01

Diesel engine emission particle filters are often placed at exhaust outlets to remove particles from the exhaust. The use of filters results in the exposure to a reduced number of nanometer-sized particles, which might be more harmful than the exposure to a larger number of micrometer-sized particles. An in vitro exposure system was established to expose human alveolar epithelial cells to freshly generated exhaust. Computer simulations were used to determine the optimal flow characteristics and ensure equal exposure conditions for each well of a 6-well plate. A selective particle size sampler was used to continuously deliver diesel soot particles with different particle size distributions to cells in culture. To determine, whether the system could be used for cellular assays, alterations in cytokine production and cell viability of human alveolar A549 cells were determined after 3h on-line exposure followed by a 21-h conventional incubation period. Data indicated that complete diesel engine emission slightly affected pre-stimulated cells, but naive cells were not affected. The fractions containing large or small particles never affected the cells. The experimental set-up allowed a reliable exposure of the cells to the complete exhaust fraction or to the fractions containing either large or small diesel engine emission particles. Copyright © 2013 Elsevier Ltd. All rights reserved.

PubMed Central

BOSCARINO, G.; CREA, M.A.; MINELLI, F.; SNIDER, F.

2015-01-01

SUMMARY Paragangliomas (PGL) are rare lesions of the neuroendocrine system; in the neck, they usually affect the carotid glomus (carotid body tumours-CBT). This retrospective analysis reports our experience in management of these lesions in patients treated by surgical resection. Between 2000 and 2014, 33 patients were surgically treated at our institution, obtaining a series of 44 cervical PGLs. Tumour characteristics, family history, diagnostic procedures, surgical treatment, short- and long-term outcomes were reviewed. A female prevalence was found (76% of cases). Familial cases occurred in 9 patients (20%); 6 presented with bilateral lesions and 1 had multiple paragangliomas. Lymph node metastasis was not found in any patient. All lesions were classified into three groups according to the latero-lateral diameter. Complete resection of the PGL was performed in all patients. Mortality was null; transitory cranial nerve deficit occurred in 20% of cases with permanent palsy in 6.7%. No perioperative stroke/TIA were observed. Surgical resection of PGL should be considered as the only therapeutic option because it can ensure complete removal of the disease. Patients with bilateral lesions and positive family history should be referred for genetic analysis. Preoperative planning of the surgical procedure by integrated diagnostic imaging and a full mastery of vascular surgery techniques are mandatory to minimise the risk of the most common postoperative complications. Long-term follow-up is recommended, particularly in patients with familial disease or sporadic lesions treated in an advanced stage. PMID:26019391

Fenton treatment of bio-treated fermentation-based pharmaceutical wastewater: removal and conversion of organic pollutants as well as estimation of operational costs.

PubMed

Cheng, Yunqin; Chen, Yunlu; Lu, Juncheng; Nie, Jianxin; Liu, Yan

2018-04-01

The Fenton process is used as a tertiary treatment to remove organic pollutants from the effluent of bio-treated pharmaceutical wastewater (EBPW). The optimal and most appropriate Fenton conditions were determined by an orthogonal array test and single-factor experiments. The removal of chemical oxygen demand (COD) was influenced by the following factors in a descending order: H 2 O 2 /Fe(II) molar ratio > H 2 O 2 dosage > reaction time. Under the most appropriate Fenton conditions (H 2 O 2 /Fe(II) molar ratio of 1:1, H 2 O 2 dosage of 120 mg L -1 and reaction time of 10 min), the COD and dissolved organic carbon (DOC) were removed with efficiencies of 62 and 53%, respectively, which met the national discharge standard (GB 21903-2008) for the Lake Tai Basin, China. However, the Fenton treatment was inadequate for removal of N compounds, and the removal of organic nitrogen led to an increment in N-NH 3 from 3.28 to 19.71 mg L -1 . Proteins and polysaccharides were completely removed, and humic acids (HAs) were partly removed with an efficiency of 55%. Three-dimensional excitation/emission matrix spectra (3DEEMs) indicated complete removal of fulvic acid-like substances and 90% reduction in the florescence intensity of humic acid-like substances. Organic pollutants with molecular weights (MW) > 10 kDa were completely removed, MW 5-10 kDa were degraded into smaller MW ones, and some low molecular weight acids (MW 0.1-1 kDa) were mineralized during the Fenton process. Some species, including pharmaceutical intermediates and solvents were detected by gas chromatography-mass spectrometry (GC-MS). The operational costs of the Fenton's treatment were estimated to be 0.58 yuan RMB/m 3 EBPW based on reagent usage and iron sludge treatment and disposal.

36 CFR 72.73 - Residency requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... PARK AND RECREATION RECOVERY ACT OF 1978 Post-Completion Compliance Responsibilities § 72.73 Residency... assistance. This prohibition applies to both regularly scheduled and special events. The general provisions... differentials. Post-completion compliance responsibilities of the recipient should continue to ensure that...

36 CFR 72.73 - Residency requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PARK AND RECREATION RECOVERY ACT OF 1978 Post-Completion Compliance Responsibilities § 72.73 Residency... assistance. This prohibition applies to both regularly scheduled and special events. The general provisions... differentials. Post-completion compliance responsibilities of the recipient should continue to ensure that...

36 CFR 72.73 - Residency requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... PARK AND RECREATION RECOVERY ACT OF 1978 Post-Completion Compliance Responsibilities § 72.73 Residency... assistance. This prohibition applies to both regularly scheduled and special events. The general provisions... differentials. Post-completion compliance responsibilities of the recipient should continue to ensure that...

36 CFR 72.73 - Residency requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... PARK AND RECREATION RECOVERY ACT OF 1978 Post-Completion Compliance Responsibilities § 72.73 Residency... assistance. This prohibition applies to both regularly scheduled and special events. The general provisions... differentials. Post-completion compliance responsibilities of the recipient should continue to ensure that...

77 FR 41481 - Integration of Variable Energy Resources

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-13

...The Federal Energy Regulatory Commission is amending the pro forma Open Access Transmission Tariff to remove unduly discriminatory practices and to ensure just and reasonable rates for Commission- jurisdictional services. Specifically, this Final Rule removes barriers to the integration of variable energy resources by requiring each public utility transmission provider to: offer intra-hourly transmission scheduling; and, incorporate provisions into the pro forma Large Generator Interconnection Agreement requiring interconnection customers whose generating facilities are variable energy resources to provide meteorological and forced outage data to the public utility transmission provider for the purpose of power production forecasting.

KSC-04pd0965

NASA Image and Video Library

2004-04-28

KENNEDY SPACE CENTER, FLA. - Workers in the Orbiter Processing Facility remove Ground Support Equipment used to install Discovery’s nose cap on Friday. The nose cap had been removed from the vehicle in the summer of 2003 and returned to the vendor, where it underwent numerous forms of Non-Destructive Evaluation. These tests included X-ray, ultrasound and eddy current to ensure its structural integrity prior to installation on the vehicle. The nose cap was also recoated. Once returned to KSC, new Thermal Protection System blankets were assembled inside of the nose cap and thermography was performed prior to installation on the orbiter.

KSC-04pd0964

NASA Image and Video Library

2004-04-28

KENNEDY SPACE CENTER, FLA. - Workers in the Orbiter Processing Facility get ready to remove Ground Support Equipment used to install Discovery’s nose cap on Friday. The nose cap had been removed from the vehicle in the summer of 2003 and returned to the vendor, where it underwent numerous forms of Non-Destructive Evaluation. These tests included X-ray, ultrasound and eddy current to ensure its structural integrity prior to installation on the vehicle. The nose cap was also recoated. Once returned to KSC, new Thermal Protection System blankets were assembled inside of the nose cap and thermography was performed prior to installation on the orbiter.

Synergistic effect of UV pretreated Fe-ZSM-5 catalysts for heterogeneous catalytic complete oxidation of VOC: A technology development for sustainable use.

PubMed

Aziz, Abdul; Kim, Kwang Soo

2017-10-15

In this work, the performance of benzene, toluene, ethylbenzene, and xylene (BTEX) removal and degradation from gas, air streams on UV pretreated Fe-ZSM-5 in a batch reactor at room temperature were studied. The Fe-ZSM-5 zeolite catalyst was prepared by hydrothermal reaction method. The influence of UV pre-irradiation time on the removal of BTEX were assessed by varying the time, ranging from 15min to 60smin. Then, sustainability of the activation of the catalyst resulted by UV pretreatment was studied by the four-cycle experiment with one time UV irradiation and after each cycle irradiation followed by BTEX removal after every cycle respectively. The results of BTEX removal depicted that 30min of UV pretreatment was sufficient for complete organics removal. The UV pretreatment effect on the catalytic oxidation and the stability of the catalyst were studied by modern instrumental techniques. The novelty of the process was the sustainable reuse of catalyst with persistent VOC removal, which works on the -adsorption-oxidation-regeneration-adsorption- cycle, which was confirmed by the characterization studies of the catalyst after four runs. The results revealed that the change in the structure, stability, morphology, and removal efficiency of the catalyst during the experiments was negligible. The VOC degradation mechanism studies showed that the oxidation occurs due to the formation of free radicals as well as hydroxyl ions, so named it heterogeneous photo-Fenton oxidation. The residual materials analysis showed the complete mineralization of VOC except small amount of acetone as oxidation product. Lastly, the kinetics of the VOC removal was studied. Copyright © 2017 Elsevier B.V. All rights reserved.

Simultaneous removal of nitrate, hydrogen peroxide and phosphate in semiconductor acidic wastewater by zero-valent iron.

PubMed

Yoshino, Hiroyuki; Tokumura, Masahiro; Kawase, Yoshinori

2014-01-01

The zero-valent iron (ZVI) wastewater treatment has been applied to simultaneous removal of nitrate, hydrogen peroxide and phosphate in semiconductor acidic wastewaters. The simultaneous removal occurs by the reactions performed due to the sequential transformation of ZVI under the acidic condition. Fortunately the solution pH of semiconductor acidic wastewaters is low which is effective for the sequential transformation of ZVI. Firstly the reduction of nitrate is taken place by electrons generated by the corrosion of ZVI under acidic conditions. Secondly the ferrous ion generated by the corrosion of ZVI reacts with hydrogen peroxide and generates ·OH radical (Fenton reaction). The Fenton reaction consists of the degradation of hydrogen peroxide and the generation of ferric ion. Finally phosphate precipitates out with iron ions. In the simultaneous removal process, 1.6 mM nitrate, 9.0 mM hydrogen peroxide and 1.0 mM phosphate were completely removed by ZVI within 100, 15 and 15 min, respectively. The synergy among the reactions for the removal of nitrate, hydrogen peroxide and phosphate was found. In the individual pollutant removal experiment, the removal of phosphate by ZVI was limited to 80% after 300 min. Its removal rate was considerably improved in the presence of hydrogen peroxide and the complete removal of phosphate was achieved after 15 min.

Clinical evaluation of a chemomechanical method for caries removal in children and adolescents.

PubMed

Peric, Tamara; Markovic, Dejan; Petrovic, Bojan

2009-01-01

The purpose of this study was to make a clinical comparison of the chemomechanical method for caries removal and the conventional rotary instruments technique when used in children and adolescents. The study comprised 120 patients aged 3-17 years randomized into two groups: caries were removed chemomechanically in 60 patients and 60 patients received conventional treatment with rotary instruments. The outcome variables were: clinically complete caries removal, pain during caries removal, need for local anesthesia, treatment time, preferences of patients, and clinical success of the restorations during the 12-month evaluation period. Complete caries removal was achieved in 92% of chemomechanically treated teeth and in all teeth treated with rotary instruments (p>0.05). The chemomechanical method significantly reduced the need for local anesthesia (p<0.001). Eighty-five percent of patients treated with Carisolv and 47% treated with rotary instruments were satisfied with the treatment (p<0.05). The mean time for chemomechanical caries removal was 11.2 ± 3.3 min and 5.2 ± 2.8 min for caries removal with rotary instruments (p<0.001). At the end of the 12-month evaluation period, there was no observed influence of the caries removal method on the survival of the restorations. The chemomechanical caries removal technique is an adequate alternative to the conventional rotary instruments method and is advantageous in pediatric dentistry.

Effectiveness of Commercial and Homemade Washing Agents in Removing Pesticide Residues on and in Apples.

PubMed

Yang, Tianxi; Doherty, Jeffery; Zhao, Bin; Kinchla, Amanda J; Clark, John M; He, Lili

2017-11-08

Removal of pesticide residues from fresh produce is important to reduce pesticide exposure to humans. This study investigated the effectiveness of commercial and homemade washing agents in the removal of surface and internalized pesticide residues from apples. Surface-enhanced Raman scattering (SERS) mapping and liquid chromatography tandem mass spectrometry (LC-MS/MS) methods were used to determine the effectiveness of different washing agents in removing pesticide residues. Surface pesticide residues were most effectively removed by sodium bicarbonate (baking soda, NaHCO 3 ) solution when compared to either tap water or Clorox bleach. Using a 10 mg/mL NaHCO 3 washing solution, it took 12 and 15 min to completely remove thiabendazole or phosmet surface residues, respectively, following a 24 h exposure to these pesticides, which were applied at a concentration of 125 ng/cm 2 . LC-MS/MS results showed, however, that 20% of applied thiabendazole and 4.4% of applied phosmet had penetrated into the apples following the 24 h exposure. Thiabendazole, a systemic pesticide, penetrated 4-fold deeper into the apple peel than did phosmet, a non-systemic pesticide, which led to more thiabendazole residues inside the apples, which could not be washed away using the NaHCO 3 washing solution. This study gives us the information that the standard postharvest washing method using Clorox bleach solution for 2 min is not an effective means to completely remove pesticide residues on the surface of apples. The NaHCO 3 method is more effective in removing surface pesticide residues on apples. In the presence of NaHCO 3 , thiabendazole and phosmet can degrade, which assists the physical removal force of washing. However, the NaHCO 3 method was not completely effective in removing residues that have penetrated into the apple peel. The overall effectiveness of the method to remove all pesticide residues diminished as pesticides penetrated deeper into the fruit. In practical application, washing apples with NaHCO 3 solution can reduce pesticides mostly from the surface. Peeling is more effective to remove the penetrated pesticides; however, bioactive compounds in the peels will become lost too.

Adherent Raindrop Modeling, Detectionand Removal in Video.

PubMed

You, Shaodi; Tan, Robby T; Kawakami, Rei; Mukaigawa, Yasuhiro; Ikeuchi, Katsushi

2016-09-01

Raindrops adhered to a windscreen or window glass can significantly degrade the visibility of a scene. Modeling, detecting and removing raindrops will, therefore, benefit many computer vision applications, particularly outdoor surveillance systems and intelligent vehicle systems. In this paper, a method that automatically detects and removes adherent raindrops is introduced. The core idea is to exploit the local spatio-temporal derivatives of raindrops. To accomplish the idea, we first model adherent raindrops using law of physics, and detect raindrops based on these models in combination with motion and intensity temporal derivatives of the input video. Having detected the raindrops, we remove them and restore the images based on an analysis that some areas of raindrops completely occludes the scene, and some other areas occlude only partially. For partially occluding areas, we restore them by retrieving as much as possible information of the scene, namely, by solving a blending function on the detected partially occluding areas using the temporal intensity derivative. For completely occluding areas, we recover them by using a video completion technique. Experimental results using various real videos show the effectiveness of our method.

Variation in neurophysiological function and evidence of quantitative electroencephalogram discordance: predicting cocaine-dependent treatment attrition.

PubMed

Venneman, Sandy; Leuchter, Andrew; Bartzokis, George; Beckson, Mace; Simon, Sara L; Schaefer, Melodie; Rawson, Richard; Newton, Tom; Cook, Ian A; Uijtdehaage, Sebastian; Ling, Walter

2006-01-01

Cocaine treatment trials suffer from a high rate of attrition. We examined pretreatment neurophysiological factors to identify participants at greatest risk. Twenty-five participants were divided into concordant and discordant groups following electroencephalogram (EEG) measures recorded prior to a double-blind, placebo-controlled treatment trial. Three possible outcomes were examined: successful completion, dropout, and removal. Concordant (high perfusion correlate) participants had an 85% rate of successful completion, while discordant participants had a 15% rate of successful completion. Twenty-five percent of dropouts and 50% of participants removed were discordant (low perfusion correlate), while only 25% of those who completed were discordant. Failure to complete the trial was not explained by depression, craving, benzoylecgonine levels or quantitative electroencephalogram (QEEG) power; thus cordance may help identify attrition risk.

How to Mess with PISA: Learning from Japanese "Kokugo" Curriculum Experts

ERIC Educational Resources Information Center

Takayama, Keita

2018-01-01

To remove cultural bias is critical for the legitimacy of Programme for International Student Assessment (PISA) as an internationally reliable academic assessment. Since its inception, PISA has made extensive effort to address this issue by putting in place a range of methodological and procedural measures to ensure its test fairness. This study…

75 FR 81908 - Defense Federal Acquisition Regulation Supplement; Organizational Conflicts of Interest in Major...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-29

... necessary to ensure that DoD has continued access to advice on systems architecture and systems engineering..., not just those aspects unique to MDAPs and systems engineering and technical assistance (SETA... industrial base. Response: This comment is now moot, since DoD decided to remove the comprehensive coverage...

7 CFR 301.81-10 - Costs and charges.

Code of Federal Regulations, 2010 CFR

2010-01-01

... not remove burlap wrap or plastic containers with drain holes prior to immersion Immerse soil balls... determine the probable source of the problem and to ensure that the problem is resolved. If the problem is... fiberglass, glass, or plastic in such a way that IFA is physically excluded and cannot become established...

Choice-Based Credit System in India: Pros and Cons

ERIC Educational Resources Information Center

Hasan, Mohammad; Parvez, Mohammad

2015-01-01

Education system of India is full of intricacies of different nature. Every ladder of education has its own problems and prospects. However, attempts have been taken to lessen complexities. From ages, time to time commissions have been constituted to improve and remove the anomalies of Indian education system especially, ensuring quality and…

Feedlot Euthanasia and Necropsy.

PubMed

Griffin, Dee

2015-11-01

Timely euthanasia of feeder cattle can minimize suffering of cattle that have little hope of recovery or pain abatement. Euthanasia techniques are described, including primary and secondary steps to ensure humane death. Considerations are discussed to ensure rendered product from euthanized cattle will be safe. A necropsy technique that is time efficient and thorough is outlined. An important aspect is minimizing the number of detached body organs, thereby making it easier to remove the necropsied animal. A necropsy data collection system is discussed that uses check-boxes to record findings. A link to a database that can be downloaded is included. Copyright © 2015 Elsevier Inc. All rights reserved.

SULTAN measurement and qualification: ITER-US-LLNL-NMARTOVETSKY- 092008

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martovetsky, N N

2006-09-21

Measuring the characteristics of full scale ITER CICC at SULTAN is the critical qualification test. If volt-ampere characteristic (VAC) or volt-temperature characteristic (VTC) are distorted, the criterion of 10 uV/m may not be a valid criterion to judge the conductor performance. Only measurements with a clear absence or low signals from the current distribution should be considered as quantitatively representative, although in some obvious circumstances one can judge if a conductor will meet or fail ITER requirements. SULTAN full scale ITER CICC testing should be done with all measures taken to ensure uniform current redistribution. A full removal of Crmore » plating in the joint area and complete solder filling of the joints (with provision of the central channel for helium flow) should be mandatory for DC qualification samples for ITER. Also, T and I should be increased slowly that an equilibrium could be established for accurate measurement of Tcs, Ic and N. It is also desirable to go up in down in current and/or temperature (within stable range) to make sure that the equilibrium is reached.« less

Methods for assessing the quality of data in public health information systems: a critical review.

PubMed

Chen, Hong; Yu, Ping; Hailey, David; Wang, Ning

2014-01-01

The quality of data in public health information systems can be ensured by effective data quality assessment. In order to conduct effective data quality assessment, measurable data attributes have to be precisely defined. Then reliable and valid measurement methods for data attributes have to be used to measure each attribute. We conducted a systematic review of data quality assessment methods for public health using major databases and well-known institutional websites. 35 studies were eligible for inclusion in the study. A total of 49 attributes of data quality were identified from the literature. Completeness, accuracy and timeliness were the three most frequently assessed attributes of data quality. Most studies directly examined data values. This is complemented by exploring either data users' perception or documentation quality. However, there are limitations of current data quality assessment methods: a lack of consensus on attributes measured; inconsistent definition of the data quality attributes; a lack of mixed methods for assessing data quality; and inadequate attention to reliability and validity. Removal of these limitations is an opportunity for further improvement.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Behroozi, Peter S.; Wechsler, Risa H.; Wu, Hao-Yi

We present a new algorithm for generating merger trees and halo catalogs which explicitly ensures consistency of halo properties (mass, position, and velocity) across time steps. Our algorithm has demonstrated the ability to improve both the completeness (through detecting and inserting otherwise missing halos) and purity (through detecting and removing spurious objects) of both merger trees and halo catalogs. In addition, our method is able to robustly measure the self-consistency of halo finders; it is the first to directly measure the uncertainties in halo positions, halo velocities, and the halo mass function for a given halo finder based on consistencymore » between snapshots in cosmological simulations. We use this algorithm to generate merger trees for two large simulations (Bolshoi and Consuelo) and evaluate two halo finders (ROCKSTAR and BDM). We find that both the ROCKSTAR and BDM halo finders track halos extremely well; in both, the number of halos which do not have physically consistent progenitors is at the 1%-2% level across all halo masses. Our code is publicly available at http://code.google.com/p/consistent-trees. Our trees and catalogs are publicly available at http://hipacc.ucsc.edu/Bolshoi/.« less

Central granular cell odontogenic tumor: a systematic review.

PubMed

Sarode, Sachin C; Sarode, Gargi S; Vaidya, Kedar

2014-03-01

Central granular cell odontogenic tumor (CGCOT) is a rare benign odontogenic neoplasm reported with various terms and is not included in the 2005 WHO classification of odontogenic tumors. It shows a predilection for middle-aged women, usually presenting as an asymptomatic swelling of the mandibular premolar-molar region. Radiographic manifestations include unilocular or multilocular radiolucent lesion, but mixed density lesions can also occur. Histopathology shows sheets and lobules of round to polygonal cells with abundant eosinophilic, granular cytoplasm and eccentrically placed nuclei. Immunohistochemical and ultrastructural features suggest the histiocytic origin of granular cells. The neoplasm does not exhibit an aggressive biological behavior and hence enucleation or curettage ensuring complete removal remains the treatment of choice. We present a systematic review on clinical, radiological, histopathological, immunohistochemical and treatment aspect of CGCOT. Published articles were identified through a literature search using online databases (PubMed, MEDLINE, Scopus) and cross-references for papers published from the year 1950 to March 2013. From a total of 37 papers, 26 (38 cases) were extracted from the database for systematic review. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

VELoCiRaPTORS.

NASA Astrophysics Data System (ADS)

Lundgren, J.; Esham, B.; Padalino, S. J.; Sangster, T. C.; Glebov, V.

2007-11-01

The Venting and Exhausting of Low Level Air Contaminants in the Rapid Pneumatic Transport of Radioactive Samples (VELoCiRaPTORS) system is constructed to transport radioactive materials quickly and safely at the NIF. A radioactive sample will be placed inside a carrier that is transported via an airflow system produced by controlled differential pressure. Midway through the transportation process, the carrier will be stopped and vented by a powered exhaust blower which will remove radioactive gases within the transport carrier. A Geiger counter will monitor the activity of the exhaust gas to ensure that it is below acceptable levels. If the radiation level is sufficient, the carrier will pass through the remainder of the system, pneumatically braking at the counting station. The complete design will run manually or automatically with control software. Tests were performed using an inactive carrier to determine possible transportation problems. The system underwent many consecutive trials without failure. VELoCiRaPTORS is a prototype of a system that could be installed at both the Laboratory for Laser Energetics at the University of Rochester and the National Ignition Facility at LLNL.

The Chemical Synthesis of Discodermolide

NASA Astrophysics Data System (ADS)

Paterson, I.; Florence, G. J.

The marine sponge-derived polyketide discodermolide is a potent antimitotic agent that represents a promising natural product lead structure in the treatment of cancer. Discodermolide shares the same microtubule-stabilising mechanism of action as Taxol®, inhibits the growth of solid tumours in animal models and shows synergy with Taxol. The pronounced cytotoxicity of discodermolide, which is maintained against cancer cell lines that display resistance to Taxol and other drugs, combined with its scarce availability from its natural source, has fuelled significant academic and industrial interest in devising a practical total synthesis as a means of ensuring a sustainable supply for drug development. This chapter surveys the various total syntheses of discodermolide that have been completed over the period 1993-2007, focusing on the strategies employed for introduction of the multiple stereocentres and achieving control over the alkene geometry, along with the various methods used for realising the pivotal fragment couplings to assemble progressively the full carbon skeleton. This dedicated synthetic effort has triumphed in removing the supply problem for discodermolide, providing sufficient material for extensive biological studies and enabling its early stage clinical development, as well as facilitating SAR studies for lead optimisation.

Impact of implant-supported prostheses on nutritional status and oral health perception in edentulous patients.

PubMed

El Osta, Nada; El Osta, Lana; Moukaddem, Farah; Papazian, Tatiana; Saad, Robert; Hennequin, Martine; Rabbaa Khabbaz, Lydia

2017-04-01

Improvement of nutritional status and perception of oral health are supposed to be different with complete conventional denture or implant-supported fixed or removable prostheses. Since no study has been conducted in Lebanon, the aim of our study was to assess the nutritional status and oral heath related quality of life (OHRQoL) in totally edentulous patients after treatment with complete denture or implant supported-prostheses. This was an observational clinical prospective study. A convenient sample of Lebanese people aged 60 years or more was selected between September 2013 and July 2015 from the Departments of removable and fixed prosthesis at Saint-Joseph University of Beirut. The treatment options included complete denture, implant-supported complete denture and implant-supported fixed prostheses. Nutritional status and OHRQoL were assessed with the Mini-Nutritional Assessment Index (MNA) and the Geriatric Oral Health Assessment Index (GOHAI) respectively at Baseline (first visit before treatment), 2-3 weeks after treatment (t1), 3 months (t2) and 6 months (t3) after treatment. Fifty-one participants (mean age: 69.39 ± 7.164 years) were included. The results have shown an improvement over time in nutritional status and OHRQoL for all treatment groups. However, 2-3 weeks after treatment the number of participants at risk of malnutrition was higher with complete removable denture, intermediate with implant-supported complete denture and lower with implant-supported fixed prostheses (p-value = 0.049). Moreover, the mean GOHAI score was significantly lower over time with complete removable denture compared to implant-supported prostheses (p-value <0.05). Our study has shown an enhancement in the quality of life and the nutritional status for implant supported-prostheses compared to conventional removable dentures. Therefore, it is fundamental that dentists communicate with their patients about implant treatment to understand their expectations, to explain the outcomes and achieve the desired clinical result. Copyright © 2017 European Society for Clinical Nutrition and Metabolism. Published by Elsevier Ltd. All rights reserved.

Review of "A Complete Education"

ERIC Educational Resources Information Center

Warren, Beth

2010-01-01

The research summary, "A Complete Education," presents the Obama administration's proposal for ensuring that all students have a comprehensive education. The key areas include: strengthening instruction in literacy and in science, technology, engineering, and mathematics (STEM); increasing access to instruction in a broader range of subject…

Research notes : ensuring project performance and adherence to completion dates.

DOT National Transportation Integrated Search

2009-04-01

A recently completed ODOT research project, led by David Sillars at Oregon State University, sought to identify alternative methods to liquidated damages for ODOT to encourage on-time project delivery and to develop a model to aid in selecting among ...

Sorbent-embedded sheets for safe drinking water in developing countries: a case study of lead(II) removal by a zeolite-embedded sheet.

PubMed

Botoman, Lester; Shukla, Elvis; Johan, Erni; Mitsunobu, Satoshi; Matsue, Naoto

2018-02-01

Although many kinds of materials for water purification are known, easy-to-use methods that ensure the safety of drinking water for rural populations are not sufficiently available. Sorbent-embedded sheets provide methods for the easy removal of contaminants from drinking water in the home. As an example of such a sorbent-embedded sheet, we prepared a Linde type A (LTA) zeolite-embedded sheet (ZES) and examined its Pb(II) removal behaviour. Different amounts of LTA were added either as powder or as ZES to 0.3 mM Pb(NO 3 ) 2 solutions containing 2.5 mM Ca(NO 3 ) 2 , in which the ratio of the negative charges in LTA to the positive charges in Pb(II) (LTA/Pb ratio) ranged from 1 to 20. After shaking, the mixtures were centrifuged to remove the powder, while the ZES was simply removed from the mixture by hand. The LTA powder removed more than 99% of the Pb(II) from the solution at all LTA/Pb ratios within 1 h, while the ZES removed >99% of the Pb(II) at LTA/Pb ratios of 2 and higher; at the highest LTA/Pb ratio of 20, the ZES removed >99% of the Pb(II) in 30 s. Therefore, the use of appropriate sorbent-embedded sheets enable the facile removal of contaminants from water.

[Endoscopy-assisted sialolithectomy for the calculus of the Stensen's duct].

PubMed

Ye, Xin; Xie, Xiaoyan; Liu, Denggao; Zhang, Lei; Zhang, Zuyan; Yu, Guangyan

2014-11-01

To investigate the clinical effects of endoscopy-assisted sialolithectomy for the calculus in the Stensen's duct. From August 2005 to July 2013, 67 consecutive patients with calculus (or foreign bodies) in the Stensen's duct underwent explorative and interventional endoscopy in our hospital. The stones (or foreign bodies) were removed by endoscopy-assisted technique. After operation, the patients were followed-up periodically, and treatment effects were analyzed. Among the 67 patients, the stones (or foreign bodies) were completely removed in 58 cases, and almost completely removed in 3 cases, with a success rate of 87% (58/67). Among the 61 stone-removed cases, treatment options included direct removal with aid of basket or forceps (24 cases), basket entrapment and opening-up of the ostium (21 cases), basket entrapment and mucosal incision near the ostium (8 cases), open removal via buccal incision (2 cases) and open removal via pre-auricular flap (6 cases). During the 6-90 months' follow-up of the 61 cases, 48 cases were asymptomatic, 7 had mild symptoms, 3 developed ductal obturation, 1 had numbness in the parotid region, and the remaining 2 were missed. Endoscopy-assisted sialolithectomy is a safe and effective gland-preservation technique for the patients with parotid gland calculus.

Mesquite removal and mulching treatment impacts on herbage production and selected soil chemical properties

Treesearch

Stacy Pease; Peter F. Ffolliott; Leonard F. DeBano; Gerald J. Gottfried

2003-01-01

Determining the effects of mesquite (Prosopis velutina) overstory removal, posttreatment control of sprouting, and mulching treatments on herbage production (standing biomass) and selected soil chemical properties on the Santa Rita Experimental Range were the objectives of this study. Mesquite control consisted of complete overstory removals with and without the...

78 FR 49762 - Desecheo National Wildlife Refuge, PR; Final Comprehensive Conservation Plan and Finding of No...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-15

... complete the removal of all invasive animal species. We will also develop and implement a plan for..., if necessary, efforts to remove invasive species. The number of vegetation plots and frequency of... safety of the refuge regarding the removal of unexploded ordnance. CCP Alternatives, Including Our...

Endoscopic removal of over-the-scope clips using a novel cutting device: a retrospective case series.

PubMed

Schmidt, Arthur; Riecken, Bettina; Damm, Michael; Cahyadi, Oscar; Bauder, Markus; Caca, Karel

2014-09-01

Over-the-scope clips (OTSCs; Ovesco Endoscopy, Tübingen, Germany) are extensively used for treatment of gastrointestinal perforations, leakages, fistulas, and bleeding. In this report, a new method of removing OTSCs using a prototype bipolar cutting device is described. A total of 11 patients underwent endoscopic removal of an OTSC. The OTSC was cut at two opposing sites by a prototype device (DC ClipCutter; Ovesco Endoscopy). The remaining clip fragments were extracted using a standard forceps. Mean procedure time was 47 minutes (range 35 - 75 minutes). Cutting of the OTSC at two opposing sites was successful in all cases (100 %). Complete retrieval of all clip fragments was possible in 10 patients (91 %). The overall success rate for cutting and complete removal of the clip was 91 %. No major complications were observed. Removal of OTSCs with the prototype device was feasible and effective. The device may be valuable for OTSC removal in emergency as well as elective indications. © Georg Thieme Verlag KG Stuttgart · New York.

Effectiveness of hand washing and disinfection methods in removing transient bacteria after patient nursing.

PubMed Central

Ojajärvi, J.

1980-01-01

The effectiveness of various hand washing and disinfection methods in removing transient skin bacteria was studied in hospital after dry or moist contamination of the hands when nursing burn patients. The results were compared with those of laboratory tests with volunteers. A fairly good correlation of the bacterial reductions existed between hospital and laboratory tests. All other methods removed Staph. aureus from the hands more effectively than liquid soap. Gram-negative bacilli were more easily removed than staphylococci, even with soap wash alone. In hospital, none of the washing and disinfection methods always removed all patient-borne bacteria from the hands. After dry or moist contamination and subsequent washing with soap only, colonies of Staph. aureus were often detected in finger-print samples. Staphylococci were more often completely removed by a 4% chlorhexidine detergent scrub and alcoholic solutions (either with or without previous soap wash) than by liquid soap, hexachlorophene or iodophor preparations. Gram-negative bacilli were more easily removed by all the washing and disinfection methods. After moist contamination, Gram-negative bacilli were more often completely removed from the hands by ethanol than by other treatments. The results of the present study emphasize the importance of always using gloves when nursing a profuse spreader of bacteria or one who must be protected from infection. PMID:6778914

6. View southwest, culvert inlet with canal bank completely removed. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. View southwest, culvert inlet with canal bank completely removed. Left to right: back of headwall; tops of high inlet barrels; vertical transition wall between high inlet barrels and low, interior, inlet barrels; tops of low interior barrels; vertical heartening planks and low cutoff wall along former edge of canal bank; dewatered canal bed. - Delaware & Raritan Canal, Ten Mile Run Culvert, 1.5 miles South of Blackwells Road, East Millstone, Somerset County, NJ

[Dissertations 25 year after date 41. Older people's adaptability].

PubMed

de Baat, C; Gerritsen, A E; van der Putten, G J; van der Maarel-Wierink, C D

2015-09-01

In 1990, the thesis 'Removable complete dentures in older people, an issue dealing with adaptability?' was published. Among other things, this thesis aimed at finding a method of measuring older people's adaptability to removable complete dentures. Its conclusion was that a subscale of the "Beoordelingsschaal voor Oudere Patiënten" (Rating scale for older patients) had predictive value. Subsequently, only a few research projects on this topic have been carried out. They dealt with demonstrated adaptation achieved after treatment, the realised adaptation. The results were disappointing. Ever since the availability of endosseous oral implants, research into adaptability to conventional removable complete dentures seems less relevant. During the last decades, inquiries into a method of measuring treatment effectiveness has focused on older people's quality of life and general health condition. However, to assess with respect to oral health care an older person's general health condition and load-taking capacity adequately, some experience is indispensable.

Application of anaerobic ammonium-oxidizing consortium to achieve completely autotrophic ammonium and sulfate removal.

PubMed

Liu, Sitong; Yang, Fenglin; Gong, Zheng; Meng, Fangang; Chen, Huihui; Xue, Yuan; Furukawa, Kenji

2008-10-01

The simultaneous ammonium and sulfate removal was detected in an anammox reactor, consisted of ammonium oxidization with sulfate deoxidization, and subsequently traditional anammox process, in via of middle medium nitrite with solid sulfur and N2 as the terminal products. The pure anammox bacteria offered a great biotechnological potential for the completely autotrophic reaction indicated by batch tests. Denaturing gradient gel electrophoresis (DGGE) analysis further revealed that a new organism belonging to Planctomycetales was strongly enriched in the defined niche: the redox of ammonium and sulfate. The new species "Anammoxoglobussulfate" was so considered as holding a critical role in the ammonium oxidization with sulfate deoxidization to nitrite. Afterwards, the Planctomyces existing in the bacteria community performed the anammox process together to achieve the complete nitrogen and sulfate removal. The potential use of sulfate as electron acceptor for ammonium oxidizing widens the usage of anammox bacteria.

Method And Apparatus For Arbitrarily Large Capacity Removable Media

DOEpatents

Milligan, Charles A.; Hughes, James P.; Debiez; Jacques

2003-04-08

A method and apparatus to handle multiple sets of removable media within a storage system. A first set of removable media are mounted on a set of drives. Data is accepted until the first set of removable media is filled. A second set of removable media is mounted on the drives, while the first set of removable media is removed. When the change in removable media is complete, writing of data proceeds on the second set of removable media. Data may be buffered while the change in removable media occurs. Alternatively, two sets of removable media may be mounted at the same time. When the first set of removable media is filled to a selected amount, the second set of removable media may then be used to write the data. A third set of removable media is set up or mounted for use, while the first set of removable media is removed.

Performance of a completely autotrophic nitrogen removal over nitrite process for treating wastewater with different substrates at ambient temperature.

PubMed

Chang, Xiaoyan; Li, Dong; Liang, Yuhai; Yang, Zhuo; Cui, Shaoming; Liu, Tao; Zeng, Huiping; Zhang, Jie

2013-04-01

The stability and parameters of a bio-ceramic filter for completely autotrophic nitrogen removal were investigated. The completely autotrophic nitrogen removal over nitrite (CANON) reactor was fed with different concentrations of ammonia (400, 300, and 200 mg N/L) but constant influent ammonia load. The results showed that the CANON system can achieve good treatment performance at ambient temperature (15-23 degrees C). The average removal rate and removal loading of NH4(+)-N and TN was 83.90%, 1.26 kg N/(m3 x day), and 70.14%, 1.09 kg N/(m3 x day), respectively. Among the influencing factors like pH, dissolved oxygen and alkalinity, it was indicated that the pH was the key parameter of the performance of the CANON system. Observing the variation of pH would contribute to better control of the CANON system in an intuitive and fast way. Denaturing gradient gel electrophoresis analysis of microorganisms further revealed that there were some significant changes in the community structure of ammonium oxidizing bacteria, which had low diversity in different stages, while the species of anaerobic ammonium oxidizing (anammox) bacteria were fewer and the community composition was relatively stable. These observations showed that anaerobic ammonia oxidation was more stable than the aerobic ammonia oxidation, which could explain that why the CANON system maintained a good removal efficiency under the changing substrate conditions.

Assessing the efficacy of citrus aurantifolia extract on smear layer removal with scanning electron microscope.

PubMed

Bolhari, Behnam; Sharifian, Mohammad Reza; Aminsobhani, Mohsen; Monsef Esfehani, Hamid Reza; Tavakolian, Pardis

2012-01-01

The purpose of this study was to determine the effects of citrus aurantifolia (CA) extract on smear layer removal in different parts of root canals. Thirty-nine single-rooted human teeth were randomly divided into three experimental (n=12) and one control (n=3) groups. Teeth were instrumented using MTwo rotary instruments. Root canals were irrigated with NaOCl during instrumentation. The canals in each group were irrigated with one of the following: completed mixture of citrus aurantifolia extracts, 17% EDTA, and alcoholic extract of CA. Distilled water was used for the control group. The irrigants were left within the canal for 20 minutes, and then rinsed with normal saline solution. Teeth were subsequently split longitudinally into 2 halves, and the canals were examined by a scanning electron-microscope. Cleanliness was evaluated using a five point scoring system. Statistical significant difference was found between groups (P<0.05). The smear layer was more effectively removed with 17% EDTA compared to alcoholic CA extract. However, they were both able to remove the smear layer in the coronal segment. Completed CA extract removed more smear layer in coronal and middle parts compared with the alcoholic extract (P=0.001); however, there was no significant difference in the apical part. Both of the alcoholic and completed mixtures of citrus aurantifolia extracts were not able to effectively remove smear layer compared with 17% EDTA during root canal therapy.

The Game Changers: Strategies to Boost College Completion and Close Attainment Gaps

ERIC Educational Resources Information Center

Jones, Stan

2015-01-01

Due to extensive research, we now know that in spite of extraordinary success in expanding access to American higher education over the last 60 years, far too little has been done to ensure that students complete college, even when they take 50 percent more time to complete the degree than full-time attendance should require. Obstacles to success…

Educational Progression in Ghana: Gender and Spatial Variations in Longitudinal Trajectories of Junior High School Completion Rate

ERIC Educational Resources Information Center

Ansong, David; Alhassan, Mustapha

2016-01-01

Completion of junior high school is a critical milestone in every Ghanaian child's educational trajectory and a critical step toward the transition to higher education. However, the rate of children completing junior high school still lags behind most educational indicators in Ghana. Far more attention is paid to ensuring that students enroll in…

Harmful algae and their potential impacts on desalination operations off southern California.

PubMed

Caron, David A; Garneau, Marie-Eve; Seubert, Erica; Howard, Meredith D A; Darjany, Lindsay; Schnetzer, Astrid; Cetinić, Ivona; Filteau, Gerry; Lauri, Phil; Jones, Burton; Trussell, Shane

2010-01-01

Seawater desalination by reverse osmosis (RO) is a reliable method for augmenting drinking water supplies. In recent years, the number and size of these water projects have increased dramatically. As freshwater resources become limited due to global climate change, rising demand, and exhausted local water supplies, seawater desalination will play an important role in the world's future water supply, reaching far beyond its deep roots in the Middle East. Emerging contaminants have been widely discussed with respect to wastewater and freshwater sources, but also must be considered for seawater desalination facilities to ensure the long-term safety and suitability of this emerging water supply. Harmful algal blooms, frequently referred to as 'red tides' due to their vibrant colors, are a concern for desalination plants due to the high biomass of microalgae present in ocean waters during these events, and a variety of substances that some of these algae produce. These compounds range from noxious substances to powerful neurotoxins that constitute significant public health risks if they are not effectively and completely removed by the RO membranes. Algal blooms can cause significant operational issues that result in increased chemical consumption, increased membrane fouling rates, and in extreme cases, a plant to be taken off-line. Early algal bloom detection by desalination facilities is essential so that operational adjustments can be made to ensure that production capacity remains unaffected. This review identifies the toxic substances, their known producers, and our present state of knowledge regarding the causes of toxic episodes, with a special focus on the Southern California Bight. (c) 2009 Elsevier Ltd. All rights reserved.

The efficacy of selective calculus ablation at 400 nm: comparison to conventional calculus removal methods

NASA Astrophysics Data System (ADS)

Schoenly, Joshua E.; Seka, Wolf; Romanos, Georgios; Rechmann, Peter

A desired outcome of scaling and root planing is the complete removal of calculus and infected root tissue and preservation of healthy cementum for rapid healing of periodontal tissues. Conventional periodontal treatments for calculus removal, such as hand instrument scaling and ultrasonic scaling, often deeply scrape the surface of the underlying hard tissue and may leave behind a smear layer. Pulsed lasers emitting at violet wavelengths (specifically, 380 to 400 nm) are a potential alternative treatment since they can selectively ablate dental calculus without ablating pristine hard tissue (i.e., enamel, cementum, and dentin). In this study, light and scanning electron microscopy are used to compare and contrast the efficacy of in vitro calculus removal for several conventional periodontal treatments (hand instruments, ultrasonic scaler, and Er:YAG laser) to calculus removal with a frequency-doubled Ti:sapphire (λ = 400 nm). After calculus removal, enamel and cementum surfaces are investigated for calculus debris and damage to the underlying hard tissue surface. Compared to the smear layer, grooves, and unintentional hard tissue removal typically found using these conventional treatments, calculus removal using the 400-nm laser is complete and selective without any removal of pristine dental hard tissue. Based on these results, selective ablation from the 400-nm laser appears to produce a root surface that would be more suitable for successful healing of periodontal tissues.

The substrate specificity of Metarhizium anisopliae and Bos taurus carboxypeptidases A: Insights into their use as tools for the removal of affinity tags

PubMed Central

Austin, Brian P.; Tözsér, József; Bagossi, Péter; Tropea, Joseph E.; Waugh, David S.

2012-01-01

Carboxypeptidases may serve as tools for removal for C-terminal affinity tags. In the present study, we describe the expression and purification of an A-type carboxypeptidase from the fungal pathogen Metarhizium anisopliae (MeCPA) that has been genetically engineered to facilitate the removal of polyhistidine tags from the C-termini of recombinant proteins. A complete, systematic analysis of the specificity of MeCPA in comparison with that of bovine carboxypeptidase A (BoCPA) was carried out. Our results indicate that the specificity of the two enzymes is similar but not identical. Histidine residues are removed more efficiently by MeCPA. The very inefficient digestion of peptides with C-terminal lysine or arginine residues, along with the complete inability of the enzyme to remove a C-terminal proline suggests a strategy for designing C-terminal affinity tags that can be trimmed by MeCPA (or BoCPA) to produce a digestion product with a homogeneous endpoint. PMID:21073956

45 CFR 310.15 - What are the safeguards and processes that comprehensive Tribal IV-D agencies must have in place...

Code of Federal Regulations, 2014 CFR

2014-10-01

... comprehensive Tribal IV-D agencies must have in place to ensure the security and privacy of Computerized Tribal... ensure the security and privacy of Computerized Tribal IV-D Systems and Office Automation? (a..., accuracy, completeness, access to, and use of data in the Computerized Tribal IV-D System and Office...

Efficacy of percutaneous treatment of biliary tract calculi using the holmium:YAG laser.

PubMed

Hazey, J W; McCreary, M; Guy, G; Melvin, W S

2007-07-01

Few Western studies have focused on percutaneous techniques using percutaneous transhepatic choledochoscopy (PTHC) and holmium:yttrium-aluminum-garnet (YAG) laser to ablate biliary calculi in patients unable or unwilling to undergo endoscopic or surgical removal of the calculi. The authors report the efficacy of the holmium:YAG laser in clearing complex biliary calculi using percutaneous access techniques. This study retrospectively reviewed 13 non-Asian patients with complex secondary biliary calculi treated percutaneously using holmium:YAG laser. Percutaneous access was accomplished via left, right, or bilateral hepatic ducts and upsized for passage of a 7-Fr video choledochoscope. Lithotripsy was performed under choledochoscopic vision using a holmium:YAG laser with 200- or 365-microm fibers generating 0.6 to 1.0 joules at 8 to 15 Hz. Patients underwent treatment until stone clearance was confirmed by PTHC. Downsizing and subsequent removal of percutaneous catheters completed the treatment course. Seven men and six women with an average age of 69 years underwent treatment. All the patients had their biliary tract stones cleared successfully. Of the 13 patients, 3 were treated solely as outpatients. The average length of percutaneous access was 108 days. At this writing, one patient still has a catheter in place. The average number of holmium:YAG laser treatments required for stone clearance was 1.6, with no patients requiring more than 3 treatments. Of the 13 patients, 8 underwent a single holmium:YAG laser treatment to clear their calculi. Prior unsuccessful attempts at endoscopic removal of the calculi had been experienced by 7 of the 13 patients. Five patients underwent percutaneous access and subsequent stone removal as their sole therapy for biliary stones. Five patients were cleared of their calculi after percutaneous laser ablation of large stones and percutaneous basket retrieval of the remaining stone fragments. There was one complication of pain requiring admission, and no deaths. The use of PTHC with holmium:YAG laser ablation is safe and efficacious, but requires prolonged biliary access and often multiple procedures to ensure clearance of all calculi.

Removal of bacteria, protozoa and viruses through a multiple-barrier household water disinfection system.

PubMed

Espinosa-García, A C; Díaz-Ávalos, C; Solano-Ortiz, R; Tapia-Palacios, M A; Vázquez-Salvador, N; Espinosa-García, S; Sarmiento-Silva, R E; Mazari-Hiriart, M

2014-03-01

Municipal water disinfection systems in some areas are not always able to meet water consumer needs, such as ensuring distributed water quality, because household water management can be a contributing factor in water re-contamination. This fact is related to the storage options that are common in places where water is scarce or is distributed over limited time periods. The aim of this study is to assess the removal capacity of a multiple-barrier water disinfection device for protozoa, bacteria, and viruses. Water samples were taken from households in Mexico City and spiked with a known amount of protozoa (Giardia cyst, Cryptosporidium oocyst), bacteria (Escherichia coli), and viruses (rotavirus, adenovirus, F-specific ribonucleic acid (FRNA) coliphage). Each inoculated sample was processed through a multiple-barrier device. The efficiency of the multiple-barrier device to remove E. coli was close to 100%, and more than 87% of Cryptosporidium oocysts and more than 98% of Giardia cysts were removed. Close to 100% of coliphages were removed, 99.6% of the adenovirus was removed, and the rotavirus was almost totally removed. An effect of site by zone was detected; this observation is important because the water characteristics could indicate the efficiency of the multiple-barrier disinfection device.

[Combined surgical-orthodontic therapy for compound odontoma].

PubMed

Dukić, Walter; Kuna, Tihomir; Lapter-Varga, Marina; Jurić, Hrvoje; Lulić-Dukić, Olga

2007-09-01

Odontogenic tumor is a rare condition in dental medicine that mostly proceeds unrecognized until the occurrence of clinical symptoms such as delayed eruption, or is incidentally detected on routine x-ray examination. The exact cause is not known, however, previous dental trauma and infection have been postulated as the potential factors in the development of odontogenic tumor. The earliest possible operative extirpation of the tumorous growth is recommended to eliminate permanent tooth impaction and to enable normal growth of the teeth. In some cases, corticotomy, including complete removal of the bony coat of the tooth, may be needed to additionally facilitate and precipitate its eruption. Orthodontic therapy is also of great importance in correct alignment of the teeth 'n the dental arch as well as in the management of other anomalies that may be associated with odontogenic tumor. A patient with compound odontoma is presented, along with the course of combined surgical-orthodontic therapy. The patient reported previous intrusion trauma that had occurred at the age of 4 years, which may have been the potential factor in the development of odontoma. In this case, there was a massive odontogenic tumor which had compromised the growth of permanent teeth, and the growth impulse was almost at the end since the patient was 11 years old and the apexes of the upper incisors were partially closed. The first operation included complete removal of the tumorous mass that had interrupted spontaneous eruption of the upper permanent incisors. It did not result in immediate spontaneous tooth eruption, so an additional operation was needed. The objective of the second operative procedure was complete removal of the covering bone over the unerupted upper permanent incisors in order to eliminate the physical barrier to tooth growth and eruption. The objective of fixed orthodontic therapy was full eruption of the partially erupted upper incisors. After 16 months, the upper incisors were regularly located in the dental arch. In this case, orthodontic therapy had another objective, i.e. to ensure rotation of the first upper premolar, to provide space for the upper permanent canine eruption and to establish regular intercuspidation after upper second premolar hypodontia. In colclusion, combined operative and orthodontic therapy can be recommended irrespective of the stage of the impacted tooth development because any treatment to precipitate tooth eruption has favorable effects. Impacted teeth should always be provided all treatment options for faster eruption, as demonstrated in our case where a good clinical result was achieved within 2.5 years. The role of regular clinical and x-ray controls for assessment of the impacted tooth eruption should also be emphasized.

Polymer Claw: Instant Underwater Adhesive

DTIC Science & Technology

2012-10-23

April to October. The biofilms included mostly algae with patches of barnacles. 3.1.1 Removal of Biofilm with Caustic Paste The caustic paste was...when the brush was rotated 360° while it was pressed downwards. Figure 3 shows that the thick algae biofilm was completely removed under these...413 TABLE OF CONTENTS 1 SUMMARY 1 2 PROIECT GOALS AND OBJECTIVES 3. 1 KEY ACCOMPLISHMENTS 3 3.1 BIOFILM REMOVAL 3 3.1.1 REMOVAL OF BIOFILM

Remediation of incomplete nitrification and capacity increase of biofilters at different drinking water treatment plants through copper dosing.

PubMed

Wagner, Florian B; Nielsen, Peter Borch; Boe-Hansen, Rasmus; Albrechtsen, Hans-Jørgen

2018-04-01

Drinking water treatment plants based on groundwater may suffer from incomplete ammonium removal, which deteriorates drinking water quality and constrains water utilities in the operation of their plants. Ammonium is normally removed through nitrification in biological granular media filters, and recent studies have demonstrated that dosing of copper can stimulate the removal of ammonium. Here, we investigated if copper dosing could generically improve ammonium removal of biofilters, at treatment plants with different characteristics. Copper was dosed at ≤1.5 μg Cu/L to biofilters at 10 groundwater treatment plants, all of which had displayed several years of incomplete nitrification. Plants exceeded the Danish national water quality standard of 0.05 mg NH 4 + /L by a factor of 2-12. Within only 2-3 weeks of dosing, ammonium removal rates increased significantly (up to 150%). Nitrification was fully established, with ammonium effluent concentrations of <0.01 mg NH 4 + -N/L at most plants, regardless of the differences in raw water chemistry, ammonium loading rates, filter design and operation, or treatment plant configuration. However, for filters without primary filtration, it took longer time to reach complete ammonium removal than for filters receiving prefiltered water, likely due to sorption of copper to iron oxides, at plants without prefiltration. With complete ammonium removal, we subjected two plants to short-term loading rate upshifts, to examine the filters' ability to cope with loading rate variations. After 2 months of dosing and an average loading rate of 1.0 g NH 4 + -N/m 3 filter material/h, the loading rate was upshifted by 50%. Yet, a filter managed to completely remove all the influent ammonium, showing that with copper dosing the filter had extra capacity to remove ammonium even beyond its normal loading rates. Depth sampling revealed that the ammonium removal rate of the filter's upper 10 cm increased more than 7-fold from 0.67 to 4.90 g NH 4 + -N/m 3 /h, and that nitrite produced from increased ammonium oxidation was completely oxidized further to nitrate. Hence, no problems with nitrite accumulation or breakthrough occurred. Overall, copper dosing generically enhanced nitrification efficiency and allowed a range of quite different plants to meet water quality standards, even at increased loading rates. The capacity increase is highly relevant in practice, as it makes filters more robust towards sudden ammonium loading rate variations. Copyright © 2017 Elsevier Ltd. All rights reserved.

75 FR 64972 - Proposed Revocation of Class E Airspace; Lone Star, TX

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-21

...-0772; Airspace Docket No. 10-ASW-10] Proposed Revocation of Class E Airspace; Lone Star, TX AGENCY... action proposes to remove Class E airspace at Lone Star, TX. Abandonment of the former Lone Star Steel... need for controlled airspace in the Lone Star, TX, area. The FAA is taking this action to ensure the...

Factors affecting the use of increment cores to assess fixation

Treesearch

Stan T. Lebow

2001-01-01

As part of an effort to ensure that treated wood products have minimal environmental and handling concerns, an American Wood Preservers Association task force is considering the development of a test to assess the degree of fixation of Waterborne wood preservatives. The proposed test involves removal and leaching of increment cores. This paper describes a laboratory...

And never the twain shall meet? Integrating revenue cycle and supply chain functions.

PubMed

Matjucha, Karen A; Chung, Bianca

2008-09-01

Four initial steps to implementing a profit and loss management model are: Identify the supplies clinicians are using. Empower stakeholders to remove items that are not commonly used. Reduce factors driving wasted product. Review the chargemaster to ensure that supplies used in selected procedures are represented. Strategically set prices that optimize maximum allowable reimbursement.

Removing Barriers: The Struggle to Ensure Educational Rights for Students Experiencing Homelessness

ERIC Educational Resources Information Center

Nix-Hodes, Patricia; Heybach, Laurene M.

2014-01-01

While the intent of the federal and state homeless education laws is clear, securing the educational rights of students without housing has been a long legal and political struggle in Chicago and Illinois. Education for students experiencing homelessness is a continuation of the civil rights struggle for equality in education and educational…

Shut Out: Denial of Education to Homeless Children.

ERIC Educational Resources Information Center

Friedman, Lorraine; Christiansen, Guy

The Stewart B. McKinney Act of 1987 was intended to remove barriers and ensure access to education for homeless children. But despite a 1988 consent decree, the United States Department of Education (DOE) has failed to comply with its statutory duties to implement the Act, the states have also failed to implement the Act adequately, and homeless…

77 FR 22186 - Removal of Category IIIa, IIIb, and IIIc Definitions; Delay of Effective Date and Reopening of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-13

... the ``Additional Information'' section for information on how to comment on this rule and how the FAA... comments, data, or views. The agency also invites comments relating to the economic, environmental, energy... include supporting data. To ensure the docket does not contain duplicate comments, commenters should send...

Western Cape Subject Advisors' Perception of Their Preparedness for Connected Classrooms

ERIC Educational Resources Information Center

Chigona, Agnes

2017-01-01

In South Africa, the Western Cape government (WCG)'s current broadband strategy aims to ensure that all schools will be connected to broadband service within a reasonable time-frame. According to the WCG integration of ICTs and the broadband will remove the digital divide and enhance curriculum delivery in schools. To achieve this, sensible…

Study on Gap Flow Field Simulation in Small Hole Machining of Ultrasonic Assisted EDM

NASA Astrophysics Data System (ADS)

Liu, Yu; Chang, Hao; Zhang, Wenchao; Ma, Fujian; Sha, Zhihua; Zhang, Shengfang

2017-12-01

When machining a small hole with high aspect ratio in EDM, it is hard for the flushing liquid entering the bottom gap and the debris could hardly be removed, which results in the accumulation of debris and affects the machining efficiency and machining accuracy. The assisted ultrasonic vibration can improve the removal of debris in the gap. Based on dynamics simulation software Fluent, a 3D model of debris movement in the gap flow field of EDM small hole machining assisted with side flushing and ultrasonic vibration is established in this paper. When depth to ratio is 3, the laws of different amplitudes and frequencies on debris distribution and removal are quantitatively analysed. The research results show that periodic ultrasonic vibration can promote the movement of debris, which is beneficial to the removal of debris in the machining gap. Compared to traditional small hole machining in EDM, the debris in the machining gap is greatly reduced, which ensures the stability of machining process and improves the machining efficiency.

Feasibility study for removing calcified material using a planar rectangular ultrasound transducer.

PubMed

Damianou, Christakis; Couppis, Andreas

2016-01-01

The aim of the proposed study was to conduct a feasibility study using a flat rectangular (3 mm × 10 mm) MRI compatible transducer operating at 5.3 MHz for destroying calcified material in an in vitro model. The proposed method can be used in the future for treating atherosclerosis plaques of the coronary, carotid or peripheral arteries. The system was tested initially on calcium rods. Another test was performed in a hydroxyapatite-polylactide model. A parametric study was performed where the mass of calcified material removed was studied as a function of intensity, pulse repetition frequency (PRF), duty factor (DF) and presence of bubbles. The amount of calcified material removed is directly related to the intensity, PRF and DF. It was found that the presence of bubbles accelerates the removal of calcified material. In order to ensure that pure mechanical mode ultrasound was used, the protocols were designed so that the temperature does not exceed 1 °C.

Hygienic quality of artificial greywater subjected to aerobic treatment: a comparison of three filter media at increasing organic loading rates.

PubMed

Lalander, Cecilia; Dalahmeh, Sahar; Jönsson, Håkan; Vinnerås, Björn

2013-01-01

With a growing world population, the lack of reliable water sources is becoming an increasing problem. Reusing greywater could alleviate this problem. When reusing greywater for crop irrigation it is paramount to ensure the removal of pathogenic organisms. This study compared the pathogen removal efficiency of pine bark and activated charcoal filters with that of conventional sand filters at three organic loading rates. The removal efficiency of Escherichia coli O157:H7 decreased drastically when the organic loading rate increased fivefold in the charcoal and sand filters, but increased by 2 log10 in the bark filters. The reduction in the virus model organism coliphage phiX174 remained unchanged with increasing organic loading in the charcoal and sand filters, but increased by 2 log10 in the bark filters. Thus, bark was demonstrated to be the most promising material for greywater treatment in terms of pathogen removal.

Treatment of azo dye Acid Orange 52 using ozonation and completed-mixed activated sludge process

NASA Astrophysics Data System (ADS)

Abidin, C. Z. A.; Fahmi; Ong, S. A.; Ahmad, R.; Sabri, S. N.

2017-06-01

In this study, the characteristic of colour and COD removal of azo dye Acid Orange 52 (AO52) by ozonation, in combination with complete-mixed activated sludge process (CMAS) was evaluated. The experimentation was arranged in two phases: during the first one, only ozonation was performed, while, during the second phase, it was integrated with CMAS. The performance of colour and COD concentration of AO52 with and without CMAS treatment, is compared and evaluated. From the results, it is obvious that high decolourization from the start of CMAS was contributed from the pre-treatments. The colour removal was due to the fact that ozonation able to cleave the azo bonds that represent colour. Thus, CMAS without pre-treatment are unable to decolourize the dyes sufficiently. 59.6% COD was removed from the first-stage, while merely 9.8% COD fraction removed from the subsequence second-stage CMAS. It is suggested that the rapid COD removal without ozonation are due to activated sludge adsorption processes. The decreased of mixed liquor suspended solids (MLSS) affected the CMAS performances, as the biomass decreased due to lack of nutrient for activated sludge microorganisms to multiply. Results from pre-ozonation alone contributed more than 50% of total COD removal, which indicated that at higher ozone dosage, tend to mineralize azo dye. Thus, ozonation not oxidized the dye though complete mineralization that produce carbon dioxide and water. However, it is a potential process for enhancing colour removal and biodegradability of dye-containing wastewater, once the appropriate ozonation time is determined. Therefore, the role of ozonation seems to break down the dye molecules and created ozonation by-product that is easily biodegraded in the subsequent biological treatment.

In vitro evaluation of efficacy of different rotary instrument systems for gutta percha removal during root canal retreatment

PubMed Central

Joseph, Mercy; Malhotra, Amit; Rao, Murali; Sharma, Abhimanyu; Talwar, Sangeeta

2016-01-01

Background Complete removal of old filling material during root canal retreatment is fundamental for predictable cleaning and shaping of canal anatomy. Most of the retreatment methods tested in earlier studies have shown inability to achieve complete removal of root canal filling. Therefore the aim of this investigation was to assess the efficacy of three different rotary nickel titanium retreatment systems and Hedstrom files in removing filling material from root canals. Material and Methods Sixty extracted mandibular premolars were decoronated to leave 15 mm root. Specimen were hand instrumented and obturated using gutta percha and AH plus root canal sealer. After storage period of two weeks, roots were retreated with three (Protaper retreatment files, Mtwo retreatment files, NRT GPR) rotary retreatment instrument systems and Hedstroem files. Subsequently, samples were sectioned longitudinally and examined under stereomicroscope. Digital images were recorded and evaluated using Digital Image Analysing Software. The retreatment time was recorded for each tooth using a stopwatch. The area of canal and the residual filling material was recorded in mm2 and the percentage of remaining filling material on canal walls was calculated. Data was analysed using ANOVA test. Results Significantly less amount of residual filling material was present in protaper and Mtwo instrumented teeth (p < 0.05) compared to NRT GPR and Hedstrom files group. Protaper instruments also required lesser time during removal of filling material followed by Mtwo instruments, NRT GPR files and Hedstrom files. Conclusions None of the instruments were able to remove the filling material completely from root canal. Protaper universal retreatment system and Mtwo retreatment files were more efficient and faster compared to NRT GPR fles and Hedstrom files. Key words:Gutta-percha removal, nickel titanium, root canal retreatment, rotary instruments. PMID:27703601

Effect of three decellularisation protocols on the mechanical behaviour and structural properties of sheep aortic valve conduits.

PubMed

Khorramirouz, Reza; Sabetkish, Shabnam; Akbarzadeh, Aram; Muhammadnejad, Ahad; Heidari, Reza; Kajbafzadeh, Abdol-Mohammad

2014-09-01

To determine the best method for decellularisation of aortic valve conduits (AVCs) that efficiently removes the cells while preserving the extracellular matrix (ECM) by examining the valvular and conduit sections separately. Sheep AVCs were decellularised by using three different protocols: detergent-based (1% SDS+1% SDC), detergent and enzyme-based (Triton+EDTA+RNase and DNase), and enzyme-based (Trypsin+RNase and DNase) methods. The efficacy of the decellularisation methods to completely remove the cells while preserving the ECM was evaluated by histological evaluation, scanning electron microscopy (SEM), hydroxyproline analysis, tensile test, and DAPI staining. The detergent-based method completely removed the cells and left the ECM and collagen content in the valve and conduit sections relatively well preserved. The detergent and enzyme-based protocol did not completely remove the cells, but left the collagen content in both sections well preserved. ECM deterioration was observed in the aortic valves (AVs), but the ultrastructure of the conduits was well preserved, with no media distortion. The enzyme-based protocol removed the cells relatively well; however, mild structural distortion and poor collagen content was observed in the AVs. Incomplete cell removal (better than that observed with the detergent and enzyme-based protocol), poor collagen preservation, and mild structural distortion were observed in conduits treated with the enzyme-based method. The results suggested that the detergent-based methods are the most effective protocols for cell removal and ECM preservation of AVCs. The AVCs treated with this detergent-based method may be excellent scaffolds for recellularisation. Copyright © 2014 Medical University of Bialystok. Published by Elsevier Urban & Partner Sp. z o.o. All rights reserved.

Removal of phosphate from greenhouse wastewater using hydrated lime.

PubMed

Dunets, C Siobhan; Zheng, Youbin

2014-01-01

Phosphate (P) contamination in nutrient-laden wastewater is currently a major topic of discussion in the North American greenhouse industry. Precipitation of P as calcium phosphate minerals using hydrated lime could provide a simple, inexpensive method for retrieval. A combination of batch experiments and chemical equilibrium modelling was used to confirm the viability of this P removal method and determine lime addition rates and pH requirements for greenhouse wastewater of varying nutrient compositions. Lime: P ratio (molar ratio of CaMg(OH)₄: PO₄‒P) provided a consistent parameter for estimating lime addition requirements regardless of initial P concentration, with a ratio of 1.5 providing around 99% removal of dissolved P. Optimal P removal occurred when lime addition increased the pH from 8.6 to 9.0, suggesting that pH monitoring during the P removal process could provide a simple method for ensuring consistent adherence to P removal standards. A Visual MINTEQ model, validated using experimental data, provided a means of predicting lime addition and pH requirements as influenced by changes in other parameters of the lime-wastewater system (e.g. calcium concentration, temperature, and initial wastewater pH). Hydrated lime addition did not contribute to the removal of macronutrient elements such as nitrate and ammonium, but did decrease the concentration of some micronutrients. This study provides basic guidance for greenhouse operators to use hydrated lime for phosphate removal from greenhouse wastewater.

Arbitrary precision value overlay and alignment system by double positioning of mask and wafer and electronic datum and nano sensor (notice of removal)

NASA Astrophysics Data System (ADS)

Bear, Wynn L.; Xiong, Xiang-Wen

2009-03-01

This paper (SPIE Paper 727249) was removed from the SPIE Digital Library on 30 April 2009 upon learning that the two names associated with this publication record, Xiang-Wen Xiong and Wynn L. Bear, are actually the same individual and not two different authors. This is not sanctioned by SPIE. As stated in the SPIE Guidelines for Professional Conduct and Publishing Ethics, "SPIE considers it the professional responsibility of all authors to ensure that the authorship of submitted papers properly reflects the contributions and consent of all authors." A serious violation of these guidelines is evident in this case. It is SPIE policy to remove papers from the SPIE Digital Library where serious professional misconduct has occurred and to impose additional sanctions as appropriate.

LDEF mechanical systems

NASA Technical Reports Server (NTRS)

Spear, W. Steve; Dursch, Harry W.

1992-01-01

Following LDEF retrieval, a number of studies were made of mechanical hardware and structure flown on the LDEF. The primary objectives are to determine the effects of long term space exposure on (1) mechanisms either used on LDEF or as part of individual experiments; (2) LDEF structural components; and (3) fasteners. Results from examination and testing of LDEF structure, fasteners, LDEF end support beam, environment exposure control canisters, experiment tray clamps, LDEF grapple fixtures, and viscous damper are presented. The most significant finding is the absence of space exposure related cold welding. The instances of seizure or removal difficulties initially attributed to cold welding were shown to have resulted from installation galling damage or improper removal techniques. Widespread difficulties encountered with removal of stainless steel fasteners underscore the need for effective thread lubrication schemes to ensure successful application of proposed orbital replacement units onboard Space Station Freedom.

Comparison between several reactors with Trametes versicolor immobilized on lignocellulosic support for the continuous treatments of hospital wastewater.

PubMed

Torán, J; Blánquez, P; Caminal, G

2017-11-01

Hospital wastewater is a major source of pharmaceutically active compounds (PhACs), which are not all removed in conventional wastewater treatment plants. White rot fungi can degrade PhACs, but their application has been limited to non-sterile conditions due to the competition with other microorganisms for growth. In this study, immobilization of Trametes versicolor on different lignocellulosic supports was studied as strategy to ensure fungal survival under continuous treatment conditions. A fluidized bed reactor and a trickling packed-bed reactor with T. versicolor immobilized on pallet wood were employed for the removal of ibuprofen, ketoprofen and naproxen. Best results were obtained with the trickling packed-bed reactor, which operated for 49days with high removal values in real hospital wastewater. Copyright © 2017 Elsevier Ltd. All rights reserved.

Comprehensive treatment in a case with advanced chronic periodontitis: a 15-year follow-up.

PubMed

Zafiropoulos, Gregory-George; Rebbe, Jochen

2010-01-01

This case report describes the comprehensive treatment of generalized, advanced periodontal disease and full-mouth rehabilitation in an adult patient. Given the extensive periodontal tissue destruction, a systematic approach was needed to determine restoration possibilities and patient expectations. Subsequent oral rehabilitation was accomplished with fixed dentures in the mandible and a removable denture in the maxilla. In the maxilla, strategically important anchor teeth were replaced with implants and a palate-free horseshoe-shaped removable denture was fabricated, using telescopic crowns as abutments. This case indicates that long-term post-treatment periodontal stability can be ensured only by full patient cooperation and consistent periodontal maintenance.

7 CFR 81.9 - Inspection and certification of diversion.

Code of Federal Regulations, 2010 CFR

2010-01-01

... diversion. When the removal of the prune-plum trees is complete, the producer(s) will notify the Committee on a form provided by the Committee. The Committee will certify that the trees approved for removal...

7 CFR 81.9 - Inspection and certification of diversion.

Code of Federal Regulations, 2011 CFR

2011-01-01

... diversion. When the removal of the prune-plum trees is complete, the producer(s) will notify the Committee on a form provided by the Committee. The Committee will certify that the trees approved for removal...

GLYPHOSATE REMOVAL FROM DRINKING WATER

EPA Science Inventory

Activated-carbon, oxidation, conventional-treatment, filtration, and membrane studies are conducted to determine which process is best suited to remove the herbicide glyphosate from potable water. Both bench-scale and pilot-scale studies are completed. Computer models are used ...

Treatment of synthetic refinery wastewater in anoxic-aerobic sequential moving bed reactors and sulphur recovery.

PubMed

Mallick, Subrat Kumar; Chakraborty, Saswati

2017-11-10

Objective of the present study was to simultaneously biodegrade synthetic petroleum refinery wastewater containing phenol (750 mg/L), sulphide (750 mg/L), hydrocarbon (as emulsified diesel of 300 mg/L), ammonia-nitrogen (350 mg/L) at pH >9 in anoxic-aerobic sequential moving bed reactors. The optimum mixing speed of anoxic reactor was observed at 20 rpm and beyond that, removal rate remained constant. In anoxic reactor the minimum hydraulic retention time was observed to be 2 days for complete removal of sulphide, 40-50% removal of phenol and total hydrocarbons and 52% of sulphur recovery. The optimum HRT of aerobic moving bed reactor was observed as 16 h (total HRT of 64 h for anoxic and aerobic reactors) for complete removals of phenol, total hydrocarbons, COD (chemical oxygen demand) and ammonia-nitrogen with nitrification.

Lessons Learned for Successful Dissertation Completion from Social Work Doctoral Graduates

ERIC Educational Resources Information Center

Davis, Ashley; Wladkowski, Stephanie P.; Mirick, Rebecca G.

2017-01-01

A dissertation demonstrates a doctoral candidate's knowledge of a content area, mastery of research methodology, and readiness for future scholarship. Doctoral candidates, social work programs, and the profession as a whole are invested in ensuring that candidates successfully complete dissertations and enter academic, research, and leadership…

49 CFR 1549.7 - Approval, amendment, renewal of the security program and certification of a certified cargo...

Code of Federal Regulations, 2010 CFR

2010-10-01

... information requested by TSA concerning Security Threat Assessments. (viii) A statement acknowledging and ensuring that each individual will successfully complete a Security Threat Assessment under § 1549.111... Security Coordinator for an applicant successfully completes a security threat assessment, TSA will provide...

Does the order of invasive species removal matter? The case of the eagle and the pig.

PubMed

Collins, Paul W; Latta, Brian C; Roemer, Gary W

2009-09-14

Invasive species are recognized as a primary driver of native species endangerment and their removal is often a key component of a conservation strategy. Removing invasive species is not always a straightforward task, however, especially when they interact with other species in complex ways to negatively influence native species. Because unintended consequences may arise if all invasive species cannot be removed simultaneously, the order of their removal is of paramount importance to ecological restoration. In the mid-1990s, three subspecies of the island fox Urocyon littoralis were driven to near extinction on the northern California Channel Islands owing to heightened predation by golden eagles Aquila chrysaetos. Eagles were lured to the islands by an abundant supply of feral pigs Sus scrofa and through the process of apparent competition pigs indirectly facilitated the decline in foxes. As a consequence, both pigs and eagles had to be removed to recover the critically endangered fox. Complete removal of pigs was problematic: removing pigs first could force eagles to concentrate on the remaining foxes, increasing their probability of extinction. Removing eagles first was difficult: eagles are not easily captured and lethal removal was politically distasteful. Using prey remains collected from eagle nests both before and after the eradication of pigs, we show that one pair of eagles that eluded capture did indeed focus more on foxes. These results support the premise that if the threat of eagle predation had not been mitigated prior to pig removal, fox extinction would have been a more likely outcome. If complete eradication of all interacting invasive species is not possible, the order in which they are removed requires careful consideration. If overlooked, unexpected consequences may result that could impede restoration.

[Habits and traditions of female college students related to intimate clothing, genital adornments, genital hair removal and sexual practices].

PubMed

Giraldo, Paulo César; Polo, Renata Colbachini; do Amaral, Rose Luce Gomes; Reis, Virgínia Vieitez; Beghini, Joziani; Bardin, Marcela Grigol

2013-09-01

To describe the practices and care with the genital area of female college students. A descriptive analytical study evaluated the habits and traditions of 364 students from the University of Campinas (Unicamp) regarding the use of underwear, body piercings, tattoos, hair removal and sexual practices. A questionnaire with 42 questions assessed the most current practices among female college students. All questions were self answered and the questionnaires, without any identification, were placed in sealed ballot boxes to ensure the confidentiality of information. The responses were tabulated in Microsoft® Excel 2007 to obtain univariate analysis. The mean age of the college students in the study was 21 years (SD ± 2.7), and 84% were white. The volunteers who participated in this study were from the biological science area (50%), the exact science area (29%) or the humanity area (21%). It was observed that 61.8% of the respondents wear cotton panties, but at the same time 75.4% wear tight jeans, and only 18.4% wore no panties when sleeping. Only one participant reported having had genital piercing and none of them reported tattooing. Most female college students do genital waxing, and approximately 1/3 of them do so completely. After hair removal, 2/3 apply an anti-inflammatory and/or moisturizer to the region. Only 62% use condoms and 17.6% use a lubricant during intercourse. Half of them receive oral sex, 17.9% practice anal sex and 26.6% of them report feeling pain during sexual intercourse. Vaginal discharge after intercourse was reported in 25.6% of the cases. Young female college students from Brazilian public universities have many inadequate care habits related to their genital area. They do not use genital piercing and tattoos, but report having pain during sexual intercourse and vaginal discharge after sex in a large number of cases.

Effects of mouth rehabilitation with removable complete dentures on stimulus perception and the electromyographic activity of the orbicularis oris muscle.

PubMed

de Caxias, Fernanda P; Dos Santos, Daniela M; Goiato, Marcelo C; Bitencourt, Sandro B; da Silva, Emily V F; Laurindo-Junior, Murilo C B; Turcio, Karina H L

2018-05-01

Many elderly individuals are rehabilitated with removable complete dentures, which require an initial adaptation period for both oral perception and the perioral muscles. Studies assessing the changes in stimulus perception and the electromyographic (EMG) activity of the orbicularis oris muscle shortly after conventional complete denture insertion are lacking. The purpose of this clinical study was to evaluate the effect of mouth rehabilitation with removable complete dentures on stimulus perception and the EMG activity of the orbicularis oris muscle. This study was approved by the Human Research Ethics Committee of the Araçatuba Dental School (São Paulo State University). Fifteen participants who had worn their removable complete dentures for at least 5 years and needed rehabilitation with new prostheses were enrolled in the study. A perception questionnaire was applied, and surface EMG examinations of the orbicularis oris muscle during rest, suction of water with a straw, and pronunciation of the syllables /bah/, /mah/, /pah/, and the word 'Mississippi' were performed before (T0) and 30 (T1) and 100 (T2) days after insertion of the new prostheses. The data were analyzed with the Cochran Q test, McNemar test, 2-way repeated measures ANOVA, and honestly significant difference (HSD) Tukey test (α=.05). Significant improvement was reported in the perception questionnaire in terms of the oral discomfort sensation in the T2 period. EMG activity decreased during rest and suction after insertion of the new prostheses. A statistical difference between the upper and lower fascicles of the orbicularis oris muscle was detected, with a decrease of EMG activity between the T0 and T1 periods on the lower fascicle, except for when pronouncing the /pah/ syllable. Mouth rehabilitation with removable complete dentures decreased oral discomfort and, depending on the oral function, decreased or increased EMG activity of the orbicularis oris muscle. In addition, the lower fascicle was more active than the upper fascicle during rest and most functional activities. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Environmental Engineering in the Slovak Republic

NASA Astrophysics Data System (ADS)

Stevulova, N.; Balintova, M.; Zelenakova, M.; Estokova, A.; Vilcekova, S.

2017-10-01

The fundamental role of environmental engineering is to protect human population and environment from impacts of human activities and to ensure environmental quality. It relates to achieving the environmental sustainability goals through advanced technologies for pollutants removing from air, water and soil in order to minimize risk in ecosystem and ensuring favourable conditions for life of humans and organisms. Nowadays, a critical analysis of the environment quality and innovative approaches to problem solving in order to achieve sustainability in environmental engineering, are necessary. This article presents an overview of the quality of the environment and progress in environmental engineering in Slovakia and gives information regarding the environmental engineering education at Faculty of Civil Engineering at Technical University in Kosice.

Paint Removal from Composites and Protective Coating Development

DTIC Science & Technology

1991-01-01

bonds between these layers relax, and the removal of the top layer is facilitated. This phenomena is known as fracking . Cold Jet has completed an initial...sublimed carbon dioxide "atmosphere" and the top layer of material, so that fracking occurs. Cold Jet adds that removal tends to occur layer by layer...often removed faster (than thinner coatings) as a result of the fracking mechanism. The paint residue from the stripping process is comprised of varying

Ozone and photocatalytic processes to remove the antibiotic sulfamethoxazole from water.

PubMed

Beltrán, Fernando J; Aguinaco, Almudena; García-Araya, Juan F; Oropesa, Ana

2008-08-01

In this study, water containing the pharmaceutical compound sulfamethoxazole (SMT) was subjected to the various treatments of different oxidation processes involving ozonation, and photolysis and catalysis under different experimental conditions. Removal rates of SMT and total organic carbon (TOC), from experiments of simple UVA radiation, ozonation (O(3)), catalytic ozonation (O(3)/TiO(2)), ozone photolysis (O(3)/UVA), photocatalytic oxidation (O(2)/TiO(2)/UVA) and photocatalytic ozonation (O(3)/UVA/TiO(2)), have been compared. Photocatalytic ozonation leads to the highest SMT removal rate (pH 7 in buffered systems, complete removal is achieved in less than 5min) and total organic carbon (in unbuffered systems, with initial pH=4, 93% TOC removal is reached). Also, lowest ozone consumption per TOC removed and toxicity was achieved with the O(3)/UVA/TiO(2) process. Direct ozone and free radical reactions were found to be the principal mechanisms for SMT and TOC removal, respectively. In photocatalytic ozonation, with buffered (pH 7) aqueous solutions phosphates (buffering salts) and accumulation of bicarbonate scavengers inhibit the reactions completely on the TiO(2) surface. As a consequence, TOC removal diminishes. In all cases, hydrogen peroxide plays a key role in TOC mineralization. According to the results obtained in this work the use of photocatalytic ozonation is recommended to achieve a high mineralization degree of water containing SMT type compounds.

Clinical characteristics, surgical and neuropsychological outcomes in drug resistant tumoral temporal lobe epilepsy.

PubMed

Ravat, Sangeeta; Iyer, Vivek; Muzumdar, Dattatraya; Shah, Urvashi; Pradhan, Pranjali; Jain, Neeraj; Godge, Yogesh

2016-12-01

Glioneuronal tumors are found in nearly one third patients who undergo surgery for pharmacoresistant epilepsy with temporal lobe being the most common location. Few studies, however have concentrated on the neurological and neuropsychological outcomes after surgery, hitherto none from India. We studied 34 patients with temporal lobe tumors and drug resistant epilepsy. These patients underwent anterior temporal lobectomy or lesionectomy based on the involvement of the hippocampus and mesial temporal structures. The clinical history, EEG, neuropsychology profile and MRI were compared. Seizure outcome was categorized using Engel's classification. At a mean follow up of 62 months, 85.29% of the patients were seizure free (Engel's Class I). All 8 patients with intraoperative electrocorticography (ECoG) guided resection were seizure free. Presence of a residual lesion was significantly associated with persistence of seizures post surgery (p = 0.002). Group analysis revealed no significant shifts in IQ and memory scores postoperatively. There was a significant improvement in the quality of life scores (total and across all subdomains) in all patients (p < 0.001). Postoperative EEG abnormalities predicted unfavorable ​seizure outcome. Surgery for temporal lobe tumors and refractory epilepsy offers complete seizure freedom in majority. Complete surgical excision of the epileptogenic zone is of paramount importance in achieving seizure freedom. Intraoperative electrocorticography (EcoG) is a useful adjunct to ensure complete removal of epileptogenic zone, thus achieving optimal seizure freedom. There is a significant improvement in the quality of life scores (p < 0.001) with no negative impact of surgery on memory and intelligence. Even the patients who are not seizure free can achieve worthwhile improvement post surgery. Copyright © 2015 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

Grape juice concentrate alleviates epididymis and sperm damage in cadmium-intoxicated rats.

PubMed

Lamas, Celina de A; Cuquetto-Leite, Livia; do Nascimento da Silva, Emanueli; Thomazini, Bruna F; Cordeiro, Gabriel da S; Predes, Fabrícia de S; Gollücke, Andrea P B; Dolder, Heidi

2017-04-01

The possibility of long-term grape juice concentrate (GJC) consumption conferring a protective effect against cadmium (Cd)-induced damage to the epididymis, completely preserving sperm profile, was evaluated here for the first time in the scientific literature. Male Wistar rats (n = 6/per group) received an intraperitoneal Cd injection (1.2 mg/Kg) at age 80 days and GJC (2 g/Kg) by gavage from 50 days until 136 days old. Groups receiving either Cd or GJC were added. An intraperitoneal injection of saline (0.9%) and water by gavage was administered in the absence of treatment with Cd or GJC. Animals were anaesthetized and exsanguinated at 136 days; the vas deferens, left testis and epididymis were removed; and perfusion continued with fixative. The right epididymis was collected for morphological analysis. Cd had a devastating effect demonstrated by reduced sperm count in testes and epididymis, sperm production and normal sperm count, besides increased epididymis sperm transit time and completely disorganized morphology. These alterations were attributed to higher Cd levels in the testes and a lipid peroxidation (LP) process. Consumption of GJC plus Cd intoxication was effective, reducing metal accumulation and LP. Consequently, we could identify a preserved sperm profile, with improvement in testis and epididymis sperm count, normal sperm structure and sperm transit time. Moreover, GJC extends its protective effect to the epididymis, allowing complete re-establishment of its morphology, ensuring successful sperm maturation process. In conclusion, our study indicates long-term GJC as a promising therapy against reproductive chemical intoxication injury damage, preserving sperm prior to ejaculation. © 2017 The Authors. International Journal of Experimental Pathology © 2017 International Journal of Experimental Pathology.

Complete removal of infected devices and simultaneous implantation of new devices for infective endocarditis after pacemaker implantation.

PubMed

Miura, Takuya; Inoue, Kazushige; Yokota, Takenori; Iwata, Takashi; Yoshitatsu, Masao

2017-02-01

Two cases of infective endocarditis after pacemaker implantation were reported. Complete removal of infected devices was performed under cardiopulmonary bypass, and simultaneous implantation of new devices was performed using epicardial leads and generator on the abdominal wall. The postoperative course was uneventful and recurrence was not recognized. These procedures may be suitable for the patients who depend on the pacemaker or who have repeat bacteremia with other infectious disease or conditions.

Industrial Hardening Demonstration.

DTIC Science & Technology

1980-09-01

products are obtained without simultaneous formation of coke and large quantities of gas. Purification Processes Sulfuric acid treatment removes sulfur by...attack ranged from 6 to 18 psi at six plants; two plants were rendered essentially invulnerable because of complete removal to a host area; and one...hazards. Such methods include: removal of conbustibles and potential missiles; strengthening or shielding of equipment against missiles and * "Crisis

7 CFR 82.9 - Inspection and certification of diversion.

Code of Federal Regulations, 2010 CFR

2010-01-01

... diversion. When the removal of the clingstone peach trees is complete, the grower will notify the CCPA on a form provided by the CCPA. The CCPA will certify that the trees approved for removal from the acreage...

7 CFR 82.9 - Inspection and certification of diversion.

Code of Federal Regulations, 2011 CFR

2011-01-01

... diversion. When the removal of the clingstone peach trees is complete, the grower will notify the CCPA on a form provided by the CCPA. The CCPA will certify that the trees approved for removal from the acreage...

Impact of strut height on offloading capacity of removable cast walkers.

PubMed

Crews, Ryan T; Sayeed, Fraaz; Najafi, Bijan

2012-08-01

Reducing weight-bearing stress to diabetic foot ulcers is critical to healing and commonly called offloading. Removable cast walkers are frequently used for offloading; however, patient compliance is often poor. Walkers commonly extend to the knee. Patients complain about walkers' weight and diminished balance with their use. This study compared the offloading capacity of walkers that varied by height. Heights included: knee, ankle, and shoe levels. To ensure a fair comparison the outsole and insole were standardized across the devices. Eleven diabetic subjects with moderate to high risk of ulceration were recruited. Subjects completed four 20 m walking trials. Subjects performed one trial with each walker and one trial with an athletic shoe. Primary outcomes focused on plantar loading and were measured by pressure insoles. Secondary outcomes were associated with gait kinematics as collected by body worn sensors. Significant differences were found for the peak pressure and pressure time integrals of the different footwear. All walkers performed better than the athletic shoe. The ankle and knee-high devices performed best. Center of mass rotation data showed a trend of the ankle walker yielding a smaller range of motion (18% medial/lateral and 22% anterior/posterior) than the knee level. The ankle-high walker was able to provide similar offloading capacities as the knee-high walker. The diminished weight, along with potentially improved stability, may result in improved compliance with ankle-high walkers. A study comparing the use of the two devices for treating ulcers is now suggested. Copyright © 2012 Elsevier Ltd. All rights reserved.

Outcome of Radical Surgical Resection for Craniopharyngioma with Hypothalamic Preservation: A Single-Center Retrospective Study of 1054 Patients.

PubMed

Shi, Xiang'en; Zhou, Zhongqing; Wu, Bin; Zhang, Yongli; Qian, Hai; Sun, Yuming; Yang, Yang; Yu, Zaitao; Tang, Zhiwei; Lu, Shuaibin

2017-06-01

A retrospective review of the surgical outcome for patients with craniopharyngioma (CP) treated in a single neurosurgical center with surgical resection using visualization to ensure hypothalamic preservation. The study included 1054 patients. Before 2003, a pterional cranial approach was preferred for 78% of patients; after 2004, the unifrontal basal interhemispheric approach was performed in 79.1% of patients. Complete tumor resection was achieved in 89.6% of patients; vision improved in 47.1% of patients who had preoperative vision impairment. However, diabetes insipidus worsened in 70.4% of patients and new-onset diabetes insipidus occurred in 29.7% of the remaining patients. Pituitary stalk preservation occurred in 48.9% of cases. There were 89.6% of patients with total tumor removal; 13.3% of patients showed tumor recurrence within an average of 2.8 years. Of 69 follow-up patients with a subtotal or partial resection, 94.2% showed tumor recurrence within an average of 4.3 months. Of the total patients, 82.3% fully recovered. This study has shown that radical surgical resection of CP using microsurgical excision can be effective with a good patient outcome without more limitations on each individual tumor of distinct features despite the impact of recent endoscopic techniques on CP surgery. The surgical approach depends on a direct and wider visualization of CP located in the midline with preserving hypothalamic structures by identifying some hypothalamic landmark structures. After surgery, most patients can resume their normal activities even after aggressive tumor removal, although patients require postoperative hormonal replacement. Copyright © 2017 Elsevier Inc. All rights reserved.

Experimental Study on the Behavior of TiN and Ti2O3 Inclusions in Contact with CaO‐Al2O3‐SiO2‐MgO Slags

PubMed Central

Bernhard, C.

2017-01-01

TiN and Ti2O3 are the predominant inclusion types in Ti-alloyed ferritic chromium stainless steels. In order to ensure the required steel cleanness level, an effective removal of such inclusions in the slag during secondary metallurgy is essential. This inclusion removal predominantly takes place via dissolution of the inclusion in the slag. The dissolution behavior of TiN and Ti2O3 in CaO-SiO2-Al2O3-MgO slags as well as their agglomeration behavior in the liquid steel is investigated using High Temperature Laser Scanning Confocal Microscopy and Tammann Furnace experiments. Thermodynamic calculations are performed using FactSage 7.0. The behavior of TiN is observed to be completely different to that of oxides. Ti2O3 dissolves quickly in slags, and its dissolution behavior is comparable to that of other already well examined oxides. In contrast, TiN shows a very intense gas reaction which is attributed to the release of nitrogen during contact with slag. Slags with higher SiO2 content show a significantly higher ability for the dissolution of TiN as compared to Al2O3-rich slags. The gas reaction is found to also significantly influence the final steel cleanness. Despite the easy absorption of TiN in the slag, the formed nitrogen supports the formation of pinholes in the steel. PMID:29109805

Feasibility of pig and human-derived aortic valve interstitial cells seeding on fixative-free decellularized animal pericardium.

PubMed

Santoro, Rosaria; Consolo, Filippo; Spiccia, Marco; Piola, Marco; Kassem, Samer; Prandi, Francesca; Vinci, Maria Cristina; Forti, Elisa; Polvani, Gianluca; Fiore, Gianfranco Beniamino; Soncini, Monica; Pesce, Maurizio

2016-02-01

Glutaraldehyde-fixed pericardium of animal origin is the elective material for the fabrication of bio-prosthetic valves for surgical replacement of insufficient/stenotic cardiac valves. However, the pericardial tissue employed to this aim undergoes severe calcification due to chronic inflammation resulting from a non-complete immunological compatibility of the animal-derived pericardial tissue resulting from failure to remove animal-derived xeno-antigens. In the mid/long-term, this leads to structural deterioration, mechanical failure, and prosthesis leaflets rupture, with consequent need for re-intervention. In the search for novel procedures to maximize biological compatibility of the pericardial tissue into immunocompetent background, we have recently devised a procedure to decellularize the human pericardium as an alternative to fixation with aldehydes. In the present contribution, we used this procedure to derive sheets of decellularized pig pericardium. The decellularized tissue was first tested for the presence of 1,3 α-galactose (αGal), one of the main xenoantigens involved in prosthetic valve rejection, as well as for mechanical tensile behavior and distensibility, and finally seeded with pig- and human-derived aortic valve interstitial cells. We demonstrate that the decellularization procedure removed the αGAL antigen, maintained the mechanical characteristics of the native pig pericardium, and ensured an efficient surface colonization of the tissue by animal- and human-derived aortic valve interstitial cells. This establishes, for the first time, the feasibility of fixative-free pericardial tissue seeding with valve competent cells for derivation of tissue engineered heart valve leaflets. © 2015 Wiley Periodicals, Inc.

Novel bioevaporation process for the zero-discharge treatment of highly concentrated organic wastewater.

PubMed

Yang, Benqin; Zhang, Lei; Lee, Yongwoo; Jahng, Deokjin

2013-10-01

A novel process termed as bioevaporation was established to completely evaporate wastewater by metabolic heat released from the aerobic microbial degradation of the organic matters contained in the highly concentrated organic wastewater itself. By adding the glucose solution and ground food waste (FW) into the biodried sludge bed, the activity of the microorganisms in the biodried sludge was stimulated and the water in the glucose solution and FW was evaporated. As the biodegradable volatile solids (BVS) concentration in wastewater increased, more heat was produced and the water removal ratio increased. When the volatile solids (VS) concentrations of both glucose and ground FW were 120 g L(-1), 101.7% and 104.3% of the added water was removed, respectively, by completely consuming the glucose and FW BVS. Therefore, the complete removal of water and biodegradable organic contents was achieved simultaneously in the bioevaporation process, which accomplished zero-discharge treatment of highly concentrated organic wastewater. Copyright © 2013 Elsevier Ltd. All rights reserved.

What affects completion of the scholarly project? A survey of RANZCP trainees.

PubMed

Cheung, Gary; Gale, Chris; Menkes, David B

2018-05-01

To explore trainee perception of what facilitates or delays completion of the RANZCP Scholarly Project (SP). Of 182 currently registered New Zealand trainees, 33 (18%) completed an online questionnaire and three open-ended questions. Most trainees agreed or strongly agreed that having protected time for research (87.5%) and access to an appropriate supervisor (87.9%) would facilitate the completion of their SP. Other college requirements were identified by most trainees (87.9%) as a factor delaying completion. Identifying and protecting research time and ensuring adequate supervision appear essential to improve the uptake and completion of this training requirement.

2011 Annual Report (National Defense Center for Energy and Environment)

DTIC Science & Technology

2011-01-01

scale or laboratory testing. Green Automated Munitions Evaluation and Recovery System (GAMERS) Cadmium and Hexavalent Chromium Free Electrical...internal cavities and enhancing oxidation removal and prevention. While sustainable alternatives to cadmium and chromium continue to be evaluated...Letterkenny Army Depot (LEAD) teamed with the NDCEE to reduce cadmium levels in process wastewater and ensure compliance with the depot’s discharge

Process for fabrication of large titanium diboride ceramic bodies

DOEpatents

Moorhead, Arthur J.; Bomar, E. S.; Becher, Paul F.

1989-01-01

A process for manufacturing large, fully dense, high purity TiB.sub.2 articles by pressing powders with a sintering aid at relatively low temperatures to reduce grain growth. The process requires stringent temperature and pressure applications in the hot-pressing step to ensure maximum removal of sintering aid and to avoid damage to the fabricated article or the die.

The influence of shade on northern red oak seedlings growth and carbon balance

Treesearch

Jennifer L. Jennings

1995-01-01

One management problem of the Southern Appalachian mixed hardwood forest is the lack of development of northern red oak (Quercus rubra L.) seedlings on high quality sites. Regeneration of red oak is not the problem. Following the removal of a stand, a combination of new seedlings, advanced reproduction and stump sprouts ensure red oak's initial...

Evaluation of the ViSiGiTM Calibration System

ClinicalTrials.gov

2013-12-10

Enhance Delineation of the Stomach Anatomy and the Surgeon's Appreciation of the Extent of Gastric Volume to be Removed;; Increase the Safety Profile of the Patient (i.e., Reduce the Likelihood of Accidental Stapling of the Orogastric Tube or Bougie);; Reduce the Incidence of OR Contamination/Infection Transmission;; Streamline OR Workflow, Resulting in Reduced OR Time; Ensure Consistent and Reproducible Staple Lines.

Comparative evaluation of apically extruded debris with V-Taper, ProTaper Next, and the Self-adjusting File systems

PubMed Central

Vyavahare, Nishant K.; Raghavendra, Srinidhi Surya; Desai, Niranjan N.

2016-01-01

Background: Complete cleaning of the root canal is the goal for ensuring success in endodontics. Removal of debris plays an important role in achieving this goal. In spite of advancements in instrument design, apical extrusion of debris remains a source of inflammation in the periradicular region. Aim: To comparatively evaluate the amount of apically extruded debris with V-Taper, ProTaper Next, and the self-adjusting File (SAF) system. Materials and Methods: Sixty-four extracted human mandibular teeth with straight root canals were taken. Access openings were done and working length determined. The samples were randomly divided into three groups: Group I - V-Taper files (n = 20), Group II - ProTaper Next (n = 20), Group III - SAF (n = 20). Biomechanical preparation was completed and the debris collected in vials to be quantitatively determined. The data obtained was statistically analyzed using ANOVA and post hoc Tukey's test. Results: All the specimens showed apical debris extrusion. SAF showed significantly less debris extrusion compared to V-Taper and ProTaper Next (P < 0.001). Among Groups I and II, ProTaper Next showed lesser debris extrusion as compared to V-Taper, but it was not significant (P = 0.124). Conclusion: The SAF showed least amount of apical debris extrusion when compared to newer rotary endodontic instruments. This indicates that the incidence of inter-treatment flare-ups due to debris extrusion would be less with the SAF. PMID:27217636

Directional coronary atherectomy (DCA)

MedlinePlus Videos and Cool Tools

... catheter called a nosecone, and removed after the intervention is complete. Together with rotation of the catheter, ... artery to keep the vessel open. After the intervention is completed the doctor injects contrast media and ...

Microbial Removal of the Pharmaceutical Compounds Ibuprofen and Diclofenac from Wastewater

PubMed Central

Inderfurth, Nadia; Schraa, Gosse; Kujawa-Roeleveld, Katarzyna; Rijnaarts, Huub

2013-01-01

Studies on the occurrence of pharmaceuticals show that the widely used pharmaceuticals ibuprofen and diclofenac are present in relevant concentrations in the environment. A pilot plant treating hospital wastewater with relevant concentrations of these pharmaceuticals was evaluated for its performance to reduce the concentration of the pharmaceuticals. Ibuprofen was completely removed, whereas diclofenac yielded a residual concentration, showing the necessity of posttreatment to remove diclofenac, for example, activated carbon. Successively, detailed laboratory experiments with activated sludge from the same wastewater treatment plant showed bioremediation potential in the treatment plant. The biological degradation pathway was studied and showed a mineralisation of ibuprofen and degradation of diclofenac. The present microbes were further studied in laboratory experiments, and DGGE analyses showed the enrichment and isolation of highly purified cultures that degraded either ibuprofen or diclofenac. This research illuminates the importance of the involved bacteria for the effectiveness of the removal of pharmaceuticals in a wastewater treatment plant. A complete removal of pharmaceuticals from wastewater will stimulate water reuse, addressing the worldwide increasing demand for clean and safe fresh water. PMID:24350260

Silver-functionalized silica aerogels and their application in the removal of iodine from aqueous environments

DOE PAGES

Asmussen, R. Matthew; Matyas, Josef; Qafoku, Nikolla P.; ...

2018-05-01

Here, one of the key challenges for radioactive waste management is the efficient capture and immobilization of radioiodine, because of its radiotoxicity, high mobility in the environment, and long half-life (t 1/2 = 1.57 × 10 7 years). Silver-functionalized silica aerogel (AgAero) represents a strong candidate for safe sequestration of radioiodine from various nuclear waste streams and subsurface environments. Batch sorption experiments up to 10 days long were carried out in oxic and anoxic conditions in both deionized water (DIW) and various Hanford Site Waste Treatment Plant (WTP) off-gas condensate simulants containing from 5 to 10 ppm of iodide (Imore » –) or iodate (IO 3 –). Also tested was the selectivity of AgAero towards I – in the presence of other halide anions. AgAero exhibited fast and complete removal of I – from DIW, slower but complete removal of I – from WTP off-gas simulants, preferred removal of I – over Br – and Cl –, and it demonstrated ability to remove IO 3 – through reduction to I –.« less

Enhancement of the complete autotrophic nitrogen removal over nitrite process in a modified single-stage subsurface vertical flow constructed wetland: Effect of saturated zone depth.

PubMed

Huang, Menglu; Wang, Zhen; Qi, Ran

2017-06-01

This study was conducted to explore enhancement of the complete autotrophic nitrogen removal over nitrite (CANON) process in a modified single-stage subsurface vertical flow constructed wetland (VSSF) with saturated zone, and nitrogen transformation pathways in the VSSF treating digested swine wastewater were investigated at four different saturated zone depths (SZDs). SZD significantly affected nitrogen transformation pathways in the VSSF throughout the experiment. As the SZD was 45cm, the CANON process was enhanced most effectively in the system owing to the notable enhancement of anammox. Correspondingly, the VSSF had the best TN removal performance [(76.74±7.30)%] and lower N 2 O emission flux [(3.50±0.22)mg·(m 2 ·h) - 1 ]. It could be concluded that autotrophic nitrogen removal via CANON process could become a primary route for nitrogen removal in the VSSF with optimized microenvironment that developed as a result of the appropriate SZD. Copyright © 2017 Elsevier Ltd. All rights reserved.

Silver-functionalized silica aerogels and their application in the removal of iodine from aqueous environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Asmussen, R. Matthew; Matyas, Josef; Qafoku, Nikolla P.

Here, one of the key challenges for radioactive waste management is the efficient capture and immobilization of radioiodine, because of its radiotoxicity, high mobility in the environment, and long half-life (t 1/2 = 1.57 × 10 7 years). Silver-functionalized silica aerogel (AgAero) represents a strong candidate for safe sequestration of radioiodine from various nuclear waste streams and subsurface environments. Batch sorption experiments up to 10 days long were carried out in oxic and anoxic conditions in both deionized water (DIW) and various Hanford Site Waste Treatment Plant (WTP) off-gas condensate simulants containing from 5 to 10 ppm of iodide (Imore » –) or iodate (IO 3 –). Also tested was the selectivity of AgAero towards I – in the presence of other halide anions. AgAero exhibited fast and complete removal of I – from DIW, slower but complete removal of I – from WTP off-gas simulants, preferred removal of I – over Br – and Cl –, and it demonstrated ability to remove IO 3 – through reduction to I –.« less

Silver-functionalized silica aerogels and their application in the removal of iodine from aqueous environments.

PubMed

Asmussen, R Matthew; Matyáš, Josef; Qafoku, Nikolla P; Kruger, Albert A

2018-05-01

One of the key challenges for radioactive waste management is the efficient capture and immobilization of radioiodine, because of its radiotoxicity, high mobility in the environment, and long half-life (t 1/2  = 1.57 × 10 7 years). Silver-functionalized silica aerogel (AgAero) represents a strong candidate for safe sequestration of radioiodine from various nuclear waste streams and subsurface environments. Batch sorption experiments up to 10 days long were carried out in oxic and anoxic conditions in both deionized water (DIW) and various Hanford Site Waste Treatment Plant (WTP) off-gas condensate simulants containing from 5 to 10 ppm of iodide (I - ) or iodate (IO 3 - ). Also tested was the selectivity of AgAero towards I - in the presence of other halide anions. AgAero exhibited fast and complete removal of I - from DIW, slower but complete removal of I - from WTP off-gas simulants, preferred removal of I - over Br - and Cl - , and it demonstrated ability to remove IO 3 - through reduction to I - . Copyright © 2018 Elsevier B.V. All rights reserved.

Selective removal of composite sealants with near-UV laser pulses

NASA Astrophysics Data System (ADS)

Louie, Tiffany M.; Jones, Robert S.; Sarma, Anupama V.; Fried, Daniel

2004-05-01

It is often necessary to replace pit and fissure sealants and composite restorations. This task is complicated by the necessity for complete removal of the remaining composite to enable suitable adhesion of new composite. Previous studies have shown that lasers pulses from a frequency-tripled Nd:YAG laser (355-nm) can selectively remove residual composite after orthodontic bracket removal on enamel surfaces. UV laser light is preferentially absorbed by polymeric resins and the organic content of the tooth enamel. The objective of this study was to determine if such laser pulses are suitable for selective removal of the old composite from pit and fissure sealants and restorations without damaging surrounding sound tissues. Optical coherence tomography was used to acquire optical cross sections of the occlusal topography and peripheral tooth structure non-destructively before application of the sealants, after sealant application, and after sealant removal with 355-nm laser pulses with intensities ranging from 0-10 J/cm2. Thermocouples were used to monitor the temperature in the pulp chamber during composite removal under clinically relevant ablation rates, i.e., 30 Hz and 30 mJ per laser pulse. At an irradiation intensity of 1.3 J/cm2 pit and fissure sealants were completely removed without visible damage to the underlying enamel. At intensities above 1.5 J/cm2, the laser removes the resin layer while at the same time preferentially etching the surface of the enamel. Temperature excursions in the pulp chamber of extracted teeth was limited to less than 5°C if air-cooling was used during the rapid removal (1-2 min) of sealants, water-cooling was not needed. This is the first presentation of a method for the selective removal of composite restorative materials without damage to the underlying sound tooth structure.

78 FR 65380 - Notice of Inventory Completion: University of Michigan, Ann Arbor, MI

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

... the University of Michigan, Ann Arbor, MI. The human remains were removed from Alpena, Isabella, Grand... removed from the Devil River Mound site (20AL1) in Alpena County, MI. A resident of Ossineke, MI...

76 FR 71342 - Proposed CERCLA Administrative Cost Recovery Settlement; River Forest Dry Cleaners Site, River...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-17

.... After EPA received an email from a concerned teacher, U.S. EPA conducted indoor air and sub-slab samples... indicate any level of contamination that warranted a removal action. The removal assessment was completed...

How to remove a chest drain.

PubMed

Allibone, Elizabeth

2015-10-07

RATIONALE AND KEY POINTS: This article aims to help nurses to undertake the removal of a chest drain in a safe, effective and patient-centred manner. This procedure requires two practitioners. The chest drain will have been inserted aseptically to remove air, blood, fluid or pus from the pleural cavity. ▶ Chest drains may be small or wide bore depending on the underlying condition and clinical setting. They may be secured with a mattress suture and/or an anchor suture. ▶ Chest drains are usually removed under medical instructions when the patient's lung has inflated, the underlying condition has resolved, there is no evidence of respiratory compromise or failure, and their anticoagulation status has been assessed as satisfactory. ▶ Chest drains secured with a mattress suture should be removed by two practitioners. One practitioner is required to remove the tube and the other to tie the mattress suture (if present) and secure the site. REFLECTIVE ACTIVITY: Clinical skills articles can help update your practice and ensure it remains evidence based. Apply this article to your practice. Reflect on and write a short account of: 1. How reading this article will change your practice. 2. How this article could be used to educate patients with chest drains. Subscribers can upload their reflective accounts at: rcni.com/portfolio .

Conservative management of placenta accreta: hysteroscopic resection of retained tissues.

PubMed

Legendre, Guillaume; Zoulovits, Félicia Joinau; Kinn, Juliette; Senthiles, Loïc; Fernandez, Hervé

2014-01-01

To evaluate the feasibility and the results of hysteroscopic removal of tissue after conservative management of retained placenta accreta. Retrospective study (Canadian Task Force classification II-3). Tertiary care university hospital. Twelve consecutive patients with hysteroscopic resection of retained tissues after conservative management of placenta accreta. Hysteroscopic removal of retained placenta tissue using a 24F bipolar resectoscope. Twelve patients with retained placenta tissue, complete in 2 and partial in 10, were included. Mean retained placenta size on magnetic resonance imaging was 54 mm (range, 13-110 mm). Complete removal was achieved in all but 1 patient who underwent a secondary hysterectomy after the first incomplete hysteroscopic resection. Complete evacuation of the uterus was completed after 1 procedure in 5 patients, after 2 procedures in 2 patients, and after 3 procedures in 4 patients. All but 2 patients had normal menstrual bleeding after hysteroscopy. Four pregnancies occurred in our series, resulting in 1 ectopic pregnancy, 1 miscarriage, and 2 deliveries. Hysteroscopic resection of retained placenta seems to be a safe and effective procedure to prevent major complications and to preserve fertility in cases of conservative management of placenta accreta. Copyright © 2014 AAGL. Published by Elsevier Inc. All rights reserved.

Timing of silicone stent removal in patients with post-tuberculosis bronchial stenosis.

PubMed

Eom, Jung Seop; Kim, Hojoong; Park, Hye Yun; Jeon, Kyeongman; Um, Sang-Won; Koh, Won-Jung; Suh, Gee Young; Chung, Man Pyo; Kwon, O Jung

2013-10-01

In patients with post-tuberculosis bronchial stenosis (PTBS), the severity of bronchial stenosis affects the restenosis rate after the silicone stent is removed. In PTBS patients with incomplete bronchial obstruction, who had a favorable prognosis, the timing of stent removal to ensure airway patency is not clear. We evaluated the time for silicone stent removal in patients with incomplete PTBS. A retrospective study examined PTBS patients who underwent stenting and removal of a silicone stent. Incomplete bronchial stenosis was defined as PTBS other than total bronchial obstruction, which had a luminal opening at the stenotic segment on bronchoscopic intervention. The duration of stenting was defined as the interval from stent insertion to removal. The study included 44 PTBS patients and the patients were grouped at intervals of 6 months according to the duration of stenting. Patients stented for more than 12 months had a significantly lower restenosis rate than those stented for less than 12 months (4% vs. 35%, P = 0.009). Multiple logistic regression revealed an association between stenting for more than 12 months and a low restenosis rate (odds ratio 12.095; 95% confidence interval 1.097-133.377). Moreover, no restenosis was observed in PTBS patients when the stent was placed more than 14 months previously. In patients with incomplete PTBS, stent placement for longer than 12 months reduced restenosis after stent removal.

Study on the Enhanced Operation of Self-Ventilation-Based Coupling System for Domestic Wastewater Treatment

NASA Astrophysics Data System (ADS)

Kong, Lingwei; Wang, Lu; Zhang, Yi; Mei, Rongwu; Zhang, Yu

2018-06-01

In this study, a new coupling system of biological filter bed and subsurface-flow constructed wetland based on the self-ventilation network was proposed, and the comparative pollutant removal efficiency at low and high influent concentration of the pilot coupling system with different substrates configurations were investigated. The study found that: The comparison system (b) had better removal rates than that of the original system (a), and the removal rate when treating low influent concentration was 74.10%, 94.14%, 73.57% and 69.53%, while in high influent concentration case was 81.30%, 90.28%, 88.57% and 75.36% for CODCr , NH4+ -N, TN and TP, respectively. The removal of the above main water indexes of the comparison system (b) promoted by 11.00%, 11.55%, 2.69% and 8.09% respectively in low influent concentration case and 4.20%, 9.20%, 7.66% and 13.61% respectively in high influent concentration case when comparing to the original system (a), which showed that the optimized configuration of various kinds of substrates was significant and was more beneficial to the degradation and removal of pollutants. The adsorption and interception function of substrates in the constructed wetland was the main way of phosphorus removal. The function of self-ventilation ensured the amount of DO in the coupling system, making the phosphorus removal was less affected comparing to structure of traditional wetland.

Examining Student Achievement and Interventions for Underprepared Vocational Math Students

ERIC Educational Resources Information Center

Hargens, Diane K.

2013-01-01

Math preparedness is a barrier to completion for many community college vocational students. With President Obama's (2010) challenge to produce more graduates in order to ensure our nation succeeds in the 21st century, community colleges across the country have an increased focus on graduation or completion. This study was conducted to provide…

Themes from a Camp Maintenance Network: Camp Maintenance and Property Personnel Share Their Insights and Challenges.

ERIC Educational Resources Information Center

Whyman, Wynne

2003-01-01

A camp maintenance survey was completed by maintenance personnel from 99 camps. Results highlighted several important considerations: ensuring sufficient maintenance funds for aging infrastructure, including camp/property personnel in decision making, publicizing completed maintenance projects, examining long-term needs of the land, and adopting…

Roadmap for Ensuring America's Future by Increasing Latino College Completion

ERIC Educational Resources Information Center

Santiago, Deborah A.

2011-01-01

The nation cannot reach its degree attainment goals without substantially increasing Latino college completion. While all groups will have to increase college degree attainment to meet the goals, increasing Latino educational attainment is crucial for the U.S. to meet its future societal and workforce needs for three main reasons: (1) the Latino…

Combining micelle-clay sorption to solar photo-Fenton processes for domestic wastewater treatment.

PubMed

Brienza, Monica; Nir, Shlomo; Plantard, Gael; Goetz, Vincent; Chiron, Serge

2018-06-08

A tertiary treatment of effluent from a biological domestic wastewater treatment plant was tested by combining filtration and solar photocatalysis. Adsorption was carried out by a sequence of two column filters, the first one filled with granular activated carbon (GAC) and the second one with granulated nano-composite of micelle-montmorillonite mixed with sand (20:100, w/w). The applied solar advanced oxidation process was homogeneous photo-Fenton photocatalysis using peroxymonosulfate (PMS) as oxidant agent. This combination of simple, robust, and low-cost technologies aimed to ensure water disinfection and emerging contaminants (ECs, mainly pharmaceuticals) removal. The filtration step showed good performances in removing dissolved organic matter and practically removing all bacteria such as Escherichia coli and Enterococcus faecalis from the secondary treated water. Solar advanced oxidation processes were efficient in elimination of trace levels of ECs. The final effluent presented an improved sanitary level with acceptable chemical and biological characteristics for irrigation.

Disposable and removable nucleic acid extraction and purification cartridges for automated flow-through systems

DOEpatents

Regan, John Frederick

2014-09-09

Removable cartridges are used on automated flow-through systems for the purpose of extracting and purifying genetic material from complex matrices. Different types of cartridges are paired with specific automated protocols to concentrate, extract, and purifying pathogenic or human genetic material. Their flow-through nature allows large quantities sample to be processed. Matrices may be filtered using size exclusion and/or affinity filters to concentrate the pathogen of interest. Lysed material is ultimately passed through a filter to remove the insoluble material before the soluble genetic material is delivered past a silica-like membrane that binds the genetic material, where it is washed, dried, and eluted. Cartridges are inserted into the housing areas of flow-through automated instruments, which are equipped with sensors to ensure proper placement and usage of the cartridges. Properly inserted cartridges create fluid- and air-tight seals with the flow lines of an automated instrument.

Arthroscopic suture bridge technique for intratendinous tear of rotator cuff in chronically painful calcific tendinitis of the shoulder.

PubMed

Ji, Jong-Hun; Shafi, Mohamed; Moon, Chang-Yun; Park, Sang-Eun; Kim, Yeon-Jun; Kim, Sung-Eun

2013-11-01

Arthroscopic removal, now the main treatment option, has almost replaced open surgery for treatment of resistant calcific tendinitis. In some cases of chronic calcific tendinitis of the shoulder, the calcific materials are hard and adherent to the tendon. Removal of these materials can cause significant intratendinous tears between the superficial and deep layers of the degenerated rotator cuff. Thus far, there are no established surgical techniques for removing the calcific materials while ensuring cuff integrity. Good clinical results for rotator cuff repair were achieved by using an arthroscopic suture bridge technique in patients with long-standing calcific tendinitis. Intact rotator cuff integrity and recovery of signal change on follow-up magnetic resonance imaging scans were confirmed. This is a technical note about a surgical technique and its clinical results with a review of relevant published reports. © 2013 Chinese Orthopaedic Association and Wiley Publishing Asia Pty Ltd.

Effect of production variables on microbiological removal in locally-produced ceramic filters for household water treatment.

PubMed

Lantagne, Daniele; Klarman, Molly; Mayer, Ally; Preston, Kelsey; Napotnik, Julie; Jellison, Kristen

2010-06-01

Diarrhoeal diseases cause an estimated 1.87 million child deaths per year. Point-of-use filtration using locally made ceramic filters improves microbiological quality of stored drinking water and prevents diarrhoeal disease. Scaling-up ceramic filtration is inhibited by lack of universal quality control standards. We investigated filter production variables to determine their affect on microbiological removal during 5-6 weeks of simulated normal use. Decreases in the clay:sawdust ratio and changes in the burnable decreased effectiveness of the filter. Method of silver application and shape of filter did not impact filter effectiveness. A maximum flow rate of 1.7 l(-hr) was established as a potential quality control measure for one particular filter to ensure 99% (2- log(10)) removal of total coliforms. Further research is indicated to determine additional production variables associated with filter effectiveness and develop standardized filter production procedures prior to scaling-up.

Removing bonded skin from a substrate

NASA Technical Reports Server (NTRS)

Chartier, E. N.

1980-01-01

Metal skin is peeled off like sardine-can cover with key. Method is useful in removing bonded skins from any substrate where substrate is strong enough not to buckle or tear when bonded skin is rolled free. Also, it is useful for removing sections of damaged skin where bladders of other equipment below substrate might be damaged if saw or router were used to cut completely through skin.

The path of placement of a removable partial denture: a microscope based approach to survey and design

PubMed Central

2015-01-01

This article reviews the topic of how to identify and develop a removable partial denture (RPD) path of placement, and provides a literature review of the concept of the RPD path of placement, also known as the path of insertion. An optimal RPD path of placement, guided by mutually parallel guide planes, ensures that the RPD flanges fit intimately over edentulous ridge structures and that the framework fits intimately with guide plane surfaces, which prevents food collecting empty spaces between the intaglio surface of the framework and intraoral surfaces, and ensures that RPD clasps engage adequate numbers of tooth undercuts to ensure RPD retention. The article covers topics such as the causes of obstructions to RPD intra-oral seating, the causes of food collecting empty spaces that may exist around an RPD, and how to identify if a guide plane is parallel with the projected RPD path of placement. The article presents a method of using a surgical operating microscope, or high magnification (6-8x or greater) binocular surgical loupes telescopes, combined with co-axial illumination, to identify a preliminary path of placement for an arch. This preliminary path of placement concept may help to guide a dentist or a dental laboratory technician when surveying a master cast of the arch to develop an RPD path of placement, or in verifying that intra-oral contouring has aligned teeth surfaces optimally with the RPD path of placement. In dentistry, a well-fitting RPD reduces long-term periodontal or structural damage to abutment teeth. PMID:25722842

[Analysis of Pathogenic Bacteria in Reclaimed Water and Impact of UV Disinfection on the Removal of Pathogenic Bacteria].

PubMed

Jing, Ming; Wang, Lei

2016-02-15

In the study, 454-pyrosequencing technology was employed to investigate the species of pathogenic bacteria and the proportion of each pathogen in secondary effluent. Culture-based, qPCR and Q-RT-PCR methods were employed to analyze the removal of indicator (E. coli) and pathogen (Salmonella and Mycobacterium) by ultraviolet (UV) disinfection at a dose of 60 mJ x Cm(-2). The results showed that 11 kinds of pathogenic bacteria were found and the most abundant potentially pathogenic bacteria in the secondary effluent were affiliated with the genera of Clostridium (2.96%), Arcobacter (0.82%) and Mycobacterium (0.36%). 99.9% of culturable E. coli and Salmonella were removed by UV disinfection (60 mJ x cm(-2), however, less than 90% of culturable Mycobacterium were removed. The removal efficiencies of viable E. coli, Salmonella and Mycobacterium were low. Q-RT-PCR seemed to be a promising method for evaluating viable microorganisms in samples. Besides, pathogenic bacteria entered into VBNC state at a UV dose of 60 mJ x cm(-2). Other advanced treatment processes were needed to ensure safe utilization of reclaimed water.

Foreskin cutting beliefs and practices and the acceptability of male circumcision for HIV prevention in Papua New Guinea

PubMed Central

2013-01-01

Background Male circumcision (MC) reduces HIV acquisition and is a key public health intervention in settings with high HIV prevalence, heterosexual transmission and low MC rates. In Papua New Guinea (PNG), where HIV prevalence is 0.8%, there is no medical MC program for HIV prevention. There are however many different foreskin cutting practices across the country’s 800 language groups. The major form exposes the glans but does not remove the foreskin. This study aimed to describe and quantify foreskin cutting styles, practices and beliefs. It also aimed to assess the acceptability of MC for HIV prevention in PNG. Methods Cross-sectional multicentre study, at two university campuses (Madang Province and National Capital District) and at two ‘rural development’ sites (mining site Enga Province; palm-oil plantation in Oro Province). Structured questionnaires were completed by participants originating from all regions of PNG who were resident at each site for study or work. Results Questionnaires were completed by 861 men and 519 women. Of men, 47% reported a longitudinal foreskin cut (cut through the dorsal surface to expose the glans but foreskin not removed); 43% reported no foreskin cut; and 10% a circumferential foreskin cut (complete removal). Frequency and type of cut varied significantly by region of origin (p < .001). Most men (72-82%) were cut between the ages of 10 – 20 years. Longitudinal cuts were most often done in a village by a friend, with circumferential cuts most often done in a clinic by a health professional. Most uncut men (71%) and longitudinal cut men (84%) stated they would remove their foreskin if it reduced the risk of HIV infection. More than 95% of uncut men and 97% of longitudinal cut men would prefer the procedure in a clinic or hospital. Most men (90%) and women (74%) stated they would remove the foreskin of their son if it reduced the risk of HIV infection. Conclusion Although 57% of men reported some form of foreskin cut only 10% reported the complete removal of the foreskin, the procedure on which international HIV prevention strategies are based. The acceptability of MC (complete foreskin removal) is high among men (for themselves and their sons) and women (for their sons). Potential MC services need to be responsive to the diversity of beliefs and practices and consider health system constraints. A concerted research effort to investigate the potential protective effects of longitudinal cuts for HIV acquisition is essential given the scale of longitudinal cuts in PNG. PMID:24015786

Computer simulation of wolf-removal strategies for animal-damage control

USGS Publications Warehouse

Haight, R.G.; Travis, L.E.; Nimerfro, K.; Mech, L.D.

2002-01-01

Because of the sustained growth of the gray wolf (Canis lupus) population in the western Great Lakes region of the United States, management agencies are anticipating gray wolf removal from the federal endangered species list and are proposing strategies for wolf management. Strategies are needed that would balance public demand for wolf conservation with demand for protection against wolf depredation on livestock, poultry, and pets. We used a stochastic, spatially structured, individually based simulation model of a hypothetical wolf population, representing a small subset of the western Great Lakes wolves, to predict the relative performance of 3 wolf-removal strategies. Those strategies included reactive management (wolf removal occurred in summer after depredation), preventive management (wolves removed in winter from territories with occasional depredation), and population-size management (wolves removed annually in winter from all territories near farms). Performance measures included number of depredating packs and wolves removed, cost, and population size after 20 years. We evaluated various scenarios about immigration, trapping success, and likelihood of packs engaging in depredation. Four robust results emerged from the simulations: 1) each strategy reduced depredation by at least 40% compared with no action, 2) preventive and population-size management removed fewer wolves than reactive management because wolves were removed in winter before pups were born, 3)population-size management was least expensive because repeated annual removal kept most territories near farms free of wolves, and 4) none of the strategies threatened wolf populations unless they were isolated because wolf removal took place near farms and not in wild areas. For isolated populations, reactive management alone ensured conservation and reduced depredation. Such results can assist decision makers in managing gray wolves in the western Great Lakes states.

Importance of Requirements Analysis & Traceability to Improve Software Quality and Reduce Cost and Risk

NASA Technical Reports Server (NTRS)

Kapoor, Manju M.; Mehta, Manju

2010-01-01

The goal of this paper is to emphasize the importance of developing complete and unambiguous requirements early in the project cycle (prior to Preliminary Design Phase). Having a complete set of requirements early in the project cycle allows sufficient time to generate a traceability matrix. Requirements traceability and analysis are the key elements in improving verification and validation process, and thus overall software quality. Traceability can be most beneficial when the system changes. If changes are made to high-level requirements it implies that low-level requirements need to be modified. Traceability ensures that requirements are appropriately and efficiently verified at various levels whereas analysis ensures that a rightly interpreted set of requirements is produced.

77 FR 15389 - Notice of Inventory Completion: California Department of Parks and Recreation, Sacramento, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-15

... associated funerary objects were removed from the Cole Creek site (CA-LAK-425), Lake County, CA. This notice... remains representing, at minimum, one individual were removed from the Cole Creek site (CA-LAK-425) in...

Development of technical solutions for securing stable operation of the intermediate separation and steam reheating system for the K-1000-60/3000 turbine unit

NASA Astrophysics Data System (ADS)

Trifonov, N. N.; Kovalenko, E. V.; Nikolaenkova, E. K.; Tren'kin, V. B.

2012-09-01

The intermediate separation and steam reheating system and its equipment are described. Problems concerned with the presence of condensate in the stack's lower chamber and in the removing chamber, with cavitation failure of the separated moisture pumps, with misalignment of heating steam flowrates, with unstable draining of heating steam condensate, with occurrence of self oscillations, etc. are considered. A procedure for determining the level in removing heating steam condensate from steam reheater elements is proposed. Technical solutions for ensuring stable operation of the intermediate separation and steam reheating system and for achieving smaller misalignment between the apparatuses are developed.

Russian Extravehicular Activity (EVA) 21A Russian Photo OPS

NASA Image and Video Library

2009-03-10

ISS018-E-039239 (10 March 2009) --- Cosmonaut Yury Lonchakov, Expedition 18 flight engineer, participates in a session of extravehicular activity (EVA) to perform maintenance on the International Space Station. During the 4-hour, 49-minute spacewalk, Lonchakov and astronaut Michael Fincke (out of frame), commander, reinstalled the Exposing Specimens of Organic and Biological Materials to Open Space (Expose-R) experiment on the universal science platform mounted to the exterior of the Zvezda Service Module. The spacewalkers also removed straps, or tape, from the area of the docking target on the Pirs airlock and docking compartment. The tape was removed to ensure it does not get in the way during the arrival of visiting Soyuz or Progress spacecraft.

Russian Extravehicular Activity (EVA) 21A Russian Photo OPS

NASA Image and Video Library

2009-03-10

ISS018-E-039241 (10 March 2009) --- Cosmonaut Yury Lonchakov, Expedition 18 flight engineer, participates in a session of extravehicular activity (EVA) to perform maintenance on the International Space Station. During the 4-hour, 49-minute spacewalk, Lonchakov and astronaut Michael Fincke (out of frame), commander, reinstalled the Exposing Specimens of Organic and Biological Materials to Open Space (Expose-R) experiment on the universal science platform mounted to the exterior of the Zvezda Service Module. The spacewalkers also removed straps, or tape, from the area of the docking target on the Pirs airlock and docking compartment. The tape was removed to ensure it does not get in the way during the arrival of visiting Soyuz or Progress spacecraft.

Fincke during Russian Extravehicular Activity (EVA) 21A

NASA Image and Video Library

2009-03-10

ISS018-E-038951 (10 March 2009) --- Astronaut Michael Fincke, Expedition 18 commander, participates in a session of extravehicular activity (EVA) to perform maintenance on the International Space Station. During the 4-hour, 49-minute spacewalk, Fincke and cosmonaut Yury Lonchakov (out of frame) reinstalled the Exposing Specimens of Organic and Biological Materials to Open Space (Expose-R) experiment on the universal science platform mounted to the exterior of the Zvezda Service Module. The spacewalkers also removed straps, or tape, from the area of the docking target on the Pirs airlock and docking compartment. The tape was removed to ensure it does not get in the way during the arrival of visiting Soyuz or Progress spacecraft.

A novel method for device-related electroencephalography artifact suppression to explore cochlear implant-related cortical changes in single-sided deafness.

PubMed

Kim, Kyungsoo; Punte, Andrea Kleine; Mertens, Griet; Van de Heyning, Paul; Park, Kyung-Joon; Choi, Hongsoo; Choi, Ji-Woong; Song, Jae-Jin

2015-11-30

Quantitative electroencephalography (qEEG) is effective when used to analyze ongoing cortical oscillations in cochlear implant (CI) users. However, localization of cortical activity in such users via qEEG is confounded by the presence of artifacts produced by the device itself. Typically, independent component analysis (ICA) is used to remove CI artifacts in auditory evoked EEG signals collected upon brief stimulation and it is effective for auditory evoked potentials (AEPs). However, AEPs do not reflect the daily environments of patients, and thus, continuous EEG data that are closer to such environments are desirable. In this case, device-related artifacts in EEG data are difficult to remove selectively via ICA due to over-completion of EEG data removal in the absence of preprocessing. EEGs were recorded for a long time under conditions of continuous auditory stimulation. To obviate the over-completion problem, we limited the frequency of CI artifacts to a significant characteristic peak and apply ICA artifact removal. Topographic brain mapping results analyzed via band-limited (BL)-ICA exhibited a better energy distribution, matched to the CI location, than data obtained using conventional ICA. Also, source localization data verified that BL-ICA effectively removed CI artifacts. The proposed method selectively removes CI artifacts from continuous EEG recordings, while ICA removal method shows residual peak and removes important brain activity signals. CI artifacts in EEG data obtained during continuous passive listening can be effectively removed with the aid of BL-ICA, opening up new EEG research possibilities in subjects with CIs. Copyright © 2015 Elsevier B.V. All rights reserved.

Colour removal and carbonyl by-production in high dose ozonation for effluent polishing.

PubMed

Mezzanotte, V; Fornaroli, R; Canobbio, S; Zoia, L; Orlandi, M

2013-04-01

Experimental tests have been conducted to investigate the efficiency and the by-product generation of high dose ozonation (10-60 mg O3 L(-1)) for complete colour removal from a treated effluent with an important component of textile dyeing wastewater. The effluent is discharged into an effluent-dominated stream where no dilution takes place, and, thus, the quality requirement for the effluents is particularly strict. 30, 60 and 90 min contact times were adopted. Colour was measured as absorbance at 426, 558 and 660 nm wavelengths. pH was monitored throughout the experiments. The experimental work showed that at 50 mg L(-1) colour removal was complete and at 60 mg O3 L(-1) the final aldehyde concentration ranged between 0.72 and 1.02 mg L(-1). Glyoxal and methylglyoxal concentrations were directly related to colour removal, whereas formaldehyde, acetaldehyde, acetone and acrolein were not. Thus, the extent of colour removal can be used to predict the increase in glyoxal and methylglyoxal concentrations. As colour removal can be assessed by a simple absorbance measurement, in contrast to the analysis of specific carbonyl compounds, which is much longer and complex, the possibility of using colour removal as an indicator for predicting the toxic potential of ozone by-products for textile effluents is of great value. Copyright © 2013 Elsevier Ltd. All rights reserved.

Complete degradation of Orange G by electrolysis in sub-critical water.

PubMed

Yuksel, Asli; Sasaki, Mitsuru; Goto, Motonobu

2011-06-15

Complete degradation of azo dye Orange G was studied using a 500 mL continuous flow reactor made of SUS 316 stainless steel. In this system, a titanium reactor wall acted as a cathode and a titanium plate-type electrode was used as an anode in a subcritical reaction medium. This hydrothermal electrolysis process provides an environmentally friendly route that does not use any organic solvents or catalysts to remove organic pollutants from wastewater. Reactions were carried out from 30 to 90 min residence times at a pressure of 7 MPa, and at different temperatures of 180-250°C by applying various direct currents ranging from 0.5 to 1A. Removal of dye from the product solution and conversion of TOC increased with increasing current value. Moreover, the effect of salt addition on degradation of Orange G and TOC conversion was investigated, because in real textile wastewater, many salts are also included together with dye. Addition of Na(2)CO(3) resulted in a massive degradation of the dye itself and complete mineralization of TOC, while NaCl and Na(2)SO(4) obstructed the removal of Orange G. Greater than 99% of Orange G was successfully removed from the product solution with a 98% TOC conversion. Copyright © 2011 Elsevier B.V. All rights reserved.

Donor cornea preparation in partial big bubble deep anterior lamellar keratoplasty.

PubMed

Lim, Li; Lim, Samuel Wen Yan

2014-01-01

The purpose of this paper is to describe a technique of donor cornea preparation to ensure good graft-host apposition in incomplete big bubble deep anterior lamellar keratoplasty. Following a partial-thickness trephination, manual dissection and excision of corneal stroma was performed. Anwar's big-bubble technique involving a deep stromal air injection was then initiated. However, the big bubble could not extend to the trephination edge and the peripheral residual corneal stroma could not be removed. Donor cornea preparation involving trimming of the posterior lip of the corneal button was then performed and good graft-host apposition was obtained without graft over-ride. We performed peripheral donor cornea trimming prior to allograft placement in order to ensure good graft-host apposition. Postoperatively, best-corrected visual acuity in both eyes was 6/7.5. Donor cornea preparation involving trimming of the posterior lip of the corneal button is a useful technique in instances where the big bubble does not extend to the trephination edge and ensures good graft-host apposition.

Asp- and Glu-specific Novel Dipeptidyl Peptidase 11 of Porphyromonas gingivalis Ensures Utilization of Proteinaceous Energy Sources*

PubMed Central

Ohara-Nemoto, Yuko; Shimoyama, Yu; Kimura, Shigenobu; Kon, Asako; Haraga, Hiroshi; Ono, Toshio; Nemoto, Takayuki K.

2011-01-01

Porphyromonas gingivalis and Porphyromonas endodontalis, asaccharolytic black-pigmented anaerobes, are predominant pathogens of human chronic and periapical periodontitis, respectively. They incorporate di- and tripeptides from the environment as carbon and energy sources. In the present study we cloned a novel dipeptidyl peptidase (DPP) gene of P. endodontalis ATCC 35406, designated as DPP11. The DPP11 gene encoded 717 amino acids with a molecular mass of 81,090 Da and was present as a 75-kDa form with an N terminus of Asp22. A homology search revealed the presence of a P. gingivalis orthologue, PGN0607, that has been categorized as an isoform of authentic DPP7. P. gingivalis DPP11 was exclusively cell-associated as a truncated 60-kDa form, and the gene ablation retarded cell growth. DPP11 specifically removed dipeptides from oligopeptides with the penultimate N-terminal Asp and Glu and has a P2-position preference to hydrophobic residues. Optimum pH was 7.0, and the kcat/Km value was higher for Asp than Glu. Those activities were lost by substitution of Ser652 in P. endodontalis and Ser655 in P. gingivalis DPP11 to Ala, and they were consistently decreased with increasing NaCl concentration. Arg670 is a unique amino acid completely conserved in all DPP11 members distributed in the genera Porphyromonas, Bacteroides, and Parabacteroides, whereas this residue is converted to Gly in all authentic DPP7 members. Substitution analysis suggested that Arg670 interacts with an acidic residue of the substrate. Considered to preferentially utilize acidic amino acids, DPP11 ensures efficient degradation of oligopeptide substrates in these Gram-negative anaerobic rods. PMID:21896480

Health Professionals' Perceptions of the Effects of Exercise on Joint Health in Rheumatoid Arthritis Patients.

PubMed

Halls, Serena; Law, Rebecca-Jane; Jones, Jeremy G; Markland, David A; Maddison, Peter J; Thom, Jeanette M

2017-09-01

Although exercise is an important factor in the management of rheumatoid arthritis (RA), research indicates that patients perceive that health professionals (HPs) are uncertain about the place of exercise in treatment and its relationship with joint damage. The present study investigated the perceptions of HPs regarding the effects of exercise on joint health in RA patients. A questionnaire investigating perceptions of exercise and joint health was distributed via professional networks and websites. Confirmatory factor analysis (CFA) was used to analyse questionnaire data and develop a focus group interview guide. Focus groups were conducted with multidisciplinary teams (MDTs) of rheumatology HPs and analysed using framework analysis. A total of 137 rheumatology HPs (95 female; 27-65 years of age) completed questionnaires. CFA showed that a four-factor model provided a marginally acceptable fit. Analysis of four focus groups (n = 24; 19 female; 30-60 years of age) identified five themes relating to HPs' perceptions of exercise and joint health in RA patients: 'Exercise is beneficial', 'Concerns about damage to joints', 'Patients have barriers to exercise', 'HP knowledge differs' and 'Patients may think service delivery is vague'. HPs were highly aware of the benefits and importance of exercise for RA patients. However, to remove the patient perception that HPs lack certainty and clarity regarding exercise it is important to ensure: (i) consistent promotion of exercise across the whole MDT; (ii) clear provision of information regarding rest, joint protection and exercise; (iii) HP education to ensure consistent, accurate knowledge, and understanding of the potential for conflicting advice when promoting exercise as part of an MDT. Copy © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Asp- and Glu-specific novel dipeptidyl peptidase 11 of Porphyromonas gingivalis ensures utilization of proteinaceous energy sources.

PubMed

Ohara-Nemoto, Yuko; Shimoyama, Yu; Kimura, Shigenobu; Kon, Asako; Haraga, Hiroshi; Ono, Toshio; Nemoto, Takayuki K

2011-11-04

Porphyromonas gingivalis and Porphyromonas endodontalis, asaccharolytic black-pigmented anaerobes, are predominant pathogens of human chronic and periapical periodontitis, respectively. They incorporate di- and tripeptides from the environment as carbon and energy sources. In the present study we cloned a novel dipeptidyl peptidase (DPP) gene of P. endodontalis ATCC 35406, designated as DPP11. The DPP11 gene encoded 717 amino acids with a molecular mass of 81,090 Da and was present as a 75-kDa form with an N terminus of Asp(22). A homology search revealed the presence of a P. gingivalis orthologue, PGN0607, that has been categorized as an isoform of authentic DPP7. P. gingivalis DPP11 was exclusively cell-associated as a truncated 60-kDa form, and the gene ablation retarded cell growth. DPP11 specifically removed dipeptides from oligopeptides with the penultimate N-terminal Asp and Glu and has a P2-position preference to hydrophobic residues. Optimum pH was 7.0, and the k(cat)/K(m) value was higher for Asp than Glu. Those activities were lost by substitution of Ser(652) in P. endodontalis and Ser(655) in P. gingivalis DPP11 to Ala, and they were consistently decreased with increasing NaCl concentration. Arg(670) is a unique amino acid completely conserved in all DPP11 members distributed in the genera Porphyromonas, Bacteroides, and Parabacteroides, whereas this residue is converted to Gly in all authentic DPP7 members. Substitution analysis suggested that Arg(670) interacts with an acidic residue of the substrate. Considered to preferentially utilize acidic amino acids, DPP11 ensures efficient degradation of oligopeptide substrates in these Gram-negative anaerobic rods.

Human rights and access to healthcare services for indigenous peoples in Africa.

PubMed

Durojaye, Ebenezer

2017-09-20

In September 2015, the United Nations adopted the sustainable development goals (SDGs) to address among others poverty and inequality within and among countries of the world. In particular, the SDGs aim at ameliorating the position of disadvantaged and vulnerable groups in societies. One of the over-arching goals of the SDGs is to ensure that no one is left behind in the realisation of their access to health care. African governments are obligated under international and regional human rights law to ensure access to healthcare services for everyone, including indigenous populations, on a non-discriminatory basis. This requires the governments to adopt appropriate measures that will remove barriers to healthcare services for disadvantaged and marginalised groups such as indigenous peoples.

Acceptance test report (MI-74067-009-00). SVWS access arm (Serial number AA-09-03) (drawing 75M08129-13)

NASA Technical Reports Server (NTRS)

Hagood, J. T.

1973-01-01

Acceptance tests were conducted at Kennedy Space Center of the Saturn Vehicle Workshop Spacecraft Access Arm and related equipment. The tests were conducted to prove complete system capability to operate satisfactorily under conditions required to support spacecraft operations and activities. The SVWS Access Arm, serial number AA-09-03, is a Command Module Service Arm, S/A 9, which was removed from the mobile launcher and modified to support the SVWS operations. The C/M environmental chamber was removed and a completely new chamber was installed. The retract system was redesigned to remove the automatic/remote control capability and replaced with a local manual control. The SVWS Access Arm System was successfully tested and supported spacecraft processing without major problems.

14 CFR 21.335 - Responsibilities of exporters.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Export Airworthiness Approvals § 21.335... packaging; (c) Remove or cause to be removed any temporary installation incorporated on an aircraft for the purpose of export delivery and restore the aircraft to the approved configuration upon completion of the...

14 CFR 21.335 - Responsibilities of exporters.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Export Airworthiness Approvals § 21.335... packaging; (c) Remove or cause to be removed any temporary installation incorporated on an aircraft for the purpose of export delivery and restore the aircraft to the approved configuration upon completion of the...

14 CFR 21.335 - Responsibilities of exporters.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Export Airworthiness Approvals § 21.335... packaging; (c) Remove or cause to be removed any temporary installation incorporated on an aircraft for the purpose of export delivery and restore the aircraft to the approved configuration upon completion of the...

14 CFR 21.335 - Responsibilities of exporters.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Export Airworthiness Approvals § 21.335... packaging; (c) Remove or cause to be removed any temporary installation incorporated on an aircraft for the purpose of export delivery and restore the aircraft to the approved configuration upon completion of the...

Removing Barriers to High School Completion--Technical Report. System Improvement and Reporting.

ERIC Educational Resources Information Center

Alberta Learning, Edmonton.

The ability of every student to successfully complete high school is fundamental to continued success and quality of life. As such, Alberta Learning's 2000-2003 Business Plan has set a target for improving high school completion by 19-year-old students from 70% to 75%. A key step to achieving this target has involved completing a study of barriers…

Process development and monitoring in stripping of a highly transparent polymeric paint with ns-pulsed fiber laser

NASA Astrophysics Data System (ADS)

Jasim, Halah A.; Demir, Ali Gökhan; Previtali, Barbara; Taha, Ziad A.

2017-08-01

Laser paint removal was studied with ns-pulsed fiber laser on the combination of 20 μm-thick, white polymeric paint and Al alloy substrate. The response of paint to single pulse ablation was evaluated to measure the ablated zone dimensions. With this information, the effect of overlap, number of passes and pulse repetition rate was evaluated to investigate machining depth. Optical emission spectroscopy was used to investigate the machining behaviour as well as to propose monitoring strategies. The results showed that despite the high transparency of the paint, complete paint removal can be achieved with reduced substrate damage (Sa = 1.3 μm). The emission spectroscopy can be used to identify removal completion as well as the reach of substrate material. The observations were also used to explain a paint removal mechanism based on thermal expansion of the paint and mechanical action provided by the plasma expansion from the substrate material.

Occurrence and removal of pharmaceuticals and hormones through drinking water treatment.

PubMed

Huerta-Fontela, Maria; Galceran, Maria Teresa; Ventura, Francesc

2011-01-01

The occurrence of fifty-five pharmaceuticals, hormones and metabolites in raw waters used for drinking water production and their removal through a drinking water treatment were studied. Thirty-five out of fifty-five drugs were detected in the raw water at the facility intake with concentrations up to 1200 ng/L. The behavior of the compounds was studied at each step: prechlorination, coagulation, sand filtration, ozonation, granular activated carbon filtration and post-chlorination; showing that the complete treatment accounted for the complete removal of all the compounds detected in raw waters except for five of them. Phenytoin, atenolol and hydrochlorothiazide were the three pharmaceuticals most frequently found in finished waters at concentrations about 10 ng/L. Sotalol and carbamazepine epoxide were found in less than a half of the samples at lower concentrations, above 2 ng/L. However despite their persistence, the removals of these five pharmaceuticals were higher than 95%. Copyright © 2010 Elsevier Ltd. All rights reserved.

Performance of system consisting of vertical flow trickling filter and horizontal flow multi-soil-layering reactor for treatment of rural wastewater.

PubMed

Zhang, Yi; Cheng, Yan; Yang, Chunping; Luo, Wei; Zeng, Guangming; Lu, Li

2015-10-01

In order to improve nitrogen removal for rural wastewater, a novel two-stage hybrid system, consisting of a vertical flow trickling filter (VFTF) and a horizontal flow multi-soil-layering (HFMSL) bioreactor was developed. The performance of the apparatus was observed under various carbon-nitrogen ratios and water spraying frequencies separately. The maximum removal efficiency of total nitrogen (TN) for the hybrid system was 92.8% while the removal rates of CODCr, ammonium (NH4(+)-N), and total phosphorus (TP) were 94.1%, 96.1%, 92.0% respectively, and the corresponding effluent concentrations were 3.61, 21.20, 1.91, and 0.33 mg L(-1). The horizontal flow mode for MSL led the system to denitrifying satisfactorily as it ensured relatively long hydraulic retention time (HRT), ideal anoxic condition and adequate organic substrates supply. Also, higher water spraying frequency benefited intermittent feeding system for pollutants removal. Shock loading test indicated that the hybrid system could operate well even at hydraulic shock loadings. Copyright © 2015 Elsevier Ltd. All rights reserved.

Evaluation of viral removal by nanofiltration using real-time quantitative polymerase chain reaction.

PubMed

Zhao, Xiaowen; Bailey, Mark R; Emery, Warren R; Lambooy, Peter K; Chen, Dayue

2007-06-01

Nanofiltration is commonly introduced into purification processes of biologics produced in mammalian cells to serve as a designated step for removal of potential exogenous viral contaminants and endogenous retrovirus-like particles. The LRV (log reduction value) achieved by nanofiltration is often determined by cell-based infectivity assay, which is time-consuming and labour-intensive. We have explored the possibility of employing QPCR (quantitative PCR) to evaluate LRV achieved by nanofiltration in scaled-down studies using two model viruses, namely xenotropic murine leukemia virus and murine minute virus. We report here the successful development of a QPCR-based method suitable for quantification of virus removal by nanofiltration. The method includes a nuclease treatment step to remove free viral nucleic acids, while viral genome associated with intact virus particles is shielded from the nuclease. In addition, HIV Armored RNA was included as an internal control to ensure the accuracy and reliability of the method. The QPCRbased method described here provides several advantages such as better sensitivity, faster turnaround time, reduced cost and higher throughput over the traditional cell-based infectivity assays.

Treatment of poultry slaughterhouse wastewater using a static granular bed reactor (SGBR) coupled with ultrafiltration (UF) membrane system.

PubMed

Basitere, M; Rinquest, Z; Njoya, M; Sheldon, M S; Ntwampe, S K O

2017-07-01

The South African poultry industry has grown exponentially in recent years due to an increased demand for their products. As a result, poultry plants consume large volumes of high quality water to ensure that hygienically safe poultry products are produced. Furthermore, poultry industries generate high strength wastewater, which can be treated successfully at low cost using anaerobic digesters. In this study, the performance of a bench-scale mesophilic static granular bed reactor (SGBR) containing fully anaerobic granules coupled with an ultrafiltration (UF) membrane system, as a post-treatment system, was investigated. The poultry slaughterhouse wastewater was characterized by a chemical oxygen demand (COD) range between 1,223 and 9,695mg/L, average biological oxygen demand of 2,375mg/L and average fats, oil and grease (FOG) of 554mg/L. The SGBR anaerobic reactor was operated for 9 weeks at different hydraulic retention times (HRTs), i.e. 55 and 40 h, with an average organic loading rate (OLR) of 1.01 and 3.14g COD/L.day. The SGBR results showed an average COD, total suspended solids (TSS) and FOG removal of 93%, 95% and 90% respectively, for both OLR. The UF post-treatment results showed an average of COD, TSS and FOG removal of 64%, 88% and 48%, respectively. The overall COD, TSS and FOG removal of the system (SGBR and UF membrane) was 98%, 99.8%, and 92.4%, respectively. The results of the combined SGBR reactor coupled with the UF membrane showed a potential to ensure environmentally friendly treatment of poultry slaughterhouse wastewater.

Early stand development in a red oak-paper birch stand regenerated through the shelterwood system in northern Wisconsin

Treesearch

Terry F. Strong

2005-01-01

A study was established 20 years ago in northern Wisconsin to examine the minimum size of seedlings to ensure seedling survival after the overstory was removed in a red oak (Quercus rubra L.) and paper birch (Betula papyrifera Marsh.) stand. About 65 percent of the site was scarified in 1985 with a woods disc. The overstory was...

Removing Legal Barriers around Work-Based Learning. Connecting the Classroom to Careers: The State's Role in Work-Based Learning

ERIC Educational Resources Information Center

Advance CTE: State Leaders Connecting Learning to Work, 2016

2016-01-01

This report, the second installment in Advance CTE's "Connecting the Classroom to Careers," series, explores an issue that is often a stumbling block for K-12 work-based learning--ensuring these experiences are safe and legal for students. This report features New Jersey, Kentucky and California and their approaches to dismantling…

Comparison of veterinary drug residue results in animal tissues by ultrahigh-performance liquid chromatography coupled to triple quadrupole ... use of a commercial lipid removal product

USDA-ARS?s Scientific Manuscript database

Veterinary drug residues in animal-derived foods must be monitored to ensure food safety, verify proper veterinary practices, enforce legal limits in domestic and imported foods, and other purposes. A common goal in drug residue analysis in foods is to achieve acceptable monitoring results for as m...

Lessons Learned from FY82 US Army Aviation Mishaps.

DTIC Science & Technology

1983-07-01

command action to ensure inexperienced instructor pilots recognize the problems associated with inexpe-rience, particularly those related to anticipating...and failed to remove tiedowns before flight. These actions were the result of a. improper attitude regarding the requirement to perform preflight...lack of self-discipline (improper Attitude ) by encouraging pilot to fly unauthorized maneuvers which exceeded he ability of the pilot and aircraft

Red Oak (Quercus rubra, L.) acron collection, nursery culture and direct seeding: A literature review

Treesearch

Daniel C. Dey

1995-01-01

The artificial regeneration of red oak by planting or direct seeding is an important method for restoring oak in ecosystems where it has been lost as a result of past management practices. Planting and direct seeding can also be used to supplement natural oak regeneration and to ensure that sufficient oak reproduction is in place when overstories are removed through...

Continuous-flow extraction system for elemental association study: a case of synthetic metal-doped iron hydroxide.

PubMed

Hinsin, Duangduean; Pdungsap, Laddawan; Shiowatana, Juwadee

2002-12-06

A continuous-flow extraction system originally developed for sequential extraction was applied to study elemental association of a synthetic metal-doped amorphous iron hydroxide phase. The homogeneity and metal association of the precipitates were evaluated by gradual leaching using the system. Leachate was collected in fractions for determination of elemental concentrations. The result obtained as extractograms indicated that the doped metals were adsorbed more on the outermost surface rather than homogeneously distributed in the precipitates. The continuous-flow extraction method was also used for effective removal of surface adsorbed metals to obtain a homogeneous metal-doped synthetic iron hydroxide by a sequential extraction using acetic acid and small volume of hydroxylamine hydrochloride solution. The system not only ensures complete washing, but the extent of metal immobilization in the synthetic iron hydroxide could be determined with high accuracy from the extractograms. The initial metal/iron mole ratio (M/Fe) in solution affected the M/Fe mole ratio in homogeneous doped iron hydroxide phase. The M/Fe mole ratio of metal incorporation was approximately 0.01-0.02 and 0.03-0.06, for initial solution M/Fe mole ratio of 0.025 and 0.100, respectively.

Phosphate limitation induces sporulation in the chytridiomycete Blastocladiella emersonii.

PubMed

Bongiorno, Vagner Alexandre; Ferreira da Cruz, Angela; Nunis da Silva, Antonio; Corrêa, Luiz Carlos

2012-09-01

The cell cycle is controlled by numerous mechanisms that ensure correct cell division. If growth is not possible, cells may eventually promote autophagy, differentiation, or apoptosis. Microorganisms interrupt their growth and differentiate under general nutrient limitation. We analyzed the effects of phosphate limitation on growth and sporulation in the chytridiomycete Blastocladiella emersonii using kinetic data, phase-contrast, and laser confocal microscopy. Under phosphate limitation, zoospores germinated and subsequently formed 2-4 spores, regardless of the nutritional content of the medium. The removal of phosphate at any time during growth induced sporulation of vegetative cells. If phosphate was later added to the same cultures, growth was restored if the cells were not yet committed to sporulation. The cycles of addition and withdrawal of phosphate from growth medium resulted in cycles of germination-growth, germination-sporulation, or germination-growth-sporulation. These results show that phosphate limitation is sufficient to interrupt cell growth and to induce complete sporulation in B. emersonii. We concluded that the determination of growth or sporulation in this microorganism is linked to phosphate availability when other nutrients are not limiting. This result provides a new tool for the dissection of nutrient-energy and signal pathways in cell growth and differentiation.

Student perspectives on the development and evaluation of a joint international education to promote employability in Europe.

PubMed

Craig, Claire; Piškur, Barbara

2012-01-01

This article presents a student evaluation of a joint international education developed as part of a European project which sought to equip health care practitioners with the skills to support employability of individuals furthest removed from the labour market, disadvantaged on account of age, gender, migration or ethnicity. Thirty eight students out of the forty one students that participated in the pilot of four modules (NL, UK, SE, DE) returned completed digital questionnaires (92.6% response rate). The study is descriptive by nature. A questionnaire was used to collect the data from students. Additionally students attending the module in the UK also took part in a series of qualitative interviews which sought to explore their experiences in more detail. These were recorded, transcribed and analyzed. Students reported that joint education facilitates competence development. The competencies they identified (Information Communications Technology) were recognised as being key to enhancing employability of disadvantaged groups. The joint international education exemplified by EEE4all offers one model of how to build a responsive international curriculum to ensure that the workforce of the future is well placed to meet the needs of this changing world.

Dental Pulp Defence and Repair Mechanisms in Dental Caries

PubMed Central

Farges, Jean-Christophe; Alliot-Licht, Brigitte; Renard, Emmanuelle; Ducret, Maxime; Gaudin, Alexis; Smith, Anthony J.; Cooper, Paul R.

2015-01-01

Dental caries is a chronic infectious disease resulting from the penetration of oral bacteria into the enamel and dentin. Microorganisms subsequently trigger inflammatory responses in the dental pulp. These events can lead to pulp healing if the infection is not too severe following the removal of diseased enamel and dentin tissues and clinical restoration of the tooth. However, chronic inflammation often persists in the pulp despite treatment, inducing permanent loss of normal tissue and reducing innate repair capacities. For complete tooth healing the formation of a reactionary/reparative dentin barrier to distance and protect the pulp from infectious agents and restorative materials is required. Clinical and in vitro experimental data clearly indicate that dentin barrier formation only occurs when pulp inflammation and infection are minimised, thus enabling reestablishment of tissue homeostasis and health. Therefore, promoting the resolution of pulp inflammation may provide a valuable therapeutic opportunity to ensure the sustainability of dental treatments. This paper focusses on key cellular and molecular mechanisms involved in pulp responses to bacteria and in the pulpal transition between caries-induced inflammation and dentinogenic-based repair. We report, using selected examples, different strategies potentially used by odontoblasts and specialized immune cells to combat dentin-invading bacteria in vivo. PMID:26538821

Dental Pulp Defence and Repair Mechanisms in Dental Caries.

PubMed

Farges, Jean-Christophe; Alliot-Licht, Brigitte; Renard, Emmanuelle; Ducret, Maxime; Gaudin, Alexis; Smith, Anthony J; Cooper, Paul R

2015-01-01

Dental caries is a chronic infectious disease resulting from the penetration of oral bacteria into the enamel and dentin. Microorganisms subsequently trigger inflammatory responses in the dental pulp. These events can lead to pulp healing if the infection is not too severe following the removal of diseased enamel and dentin tissues and clinical restoration of the tooth. However, chronic inflammation often persists in the pulp despite treatment, inducing permanent loss of normal tissue and reducing innate repair capacities. For complete tooth healing the formation of a reactionary/reparative dentin barrier to distance and protect the pulp from infectious agents and restorative materials is required. Clinical and in vitro experimental data clearly indicate that dentin barrier formation only occurs when pulp inflammation and infection are minimised, thus enabling reestablishment of tissue homeostasis and health. Therefore, promoting the resolution of pulp inflammation may provide a valuable therapeutic opportunity to ensure the sustainability of dental treatments. This paper focusses on key cellular and molecular mechanisms involved in pulp responses to bacteria and in the pulpal transition between caries-induced inflammation and dentinogenic-based repair. We report, using selected examples, different strategies potentially used by odontoblasts and specialized immune cells to combat dentin-invading bacteria in vivo.

New uses of position-sensitive photomultiplier tubes

NASA Astrophysics Data System (ADS)

Gordon, Jeffrey S.; Redus, Robert H.; Nagarkar, Vivek V.; Squillante, Michael R.

1992-12-01

Recent advances in photomultiplier tube technology have led to the availability of position sensitive photomultiplier tubes (PSPMTs). These tubes make it possible to build a new generation of imaging instruments for gamma rays and other types of ionizing radiation. We have investigated the use of these tubes for the construction of several prototype instruments. The first application investigated measures the quantity and distribution of radioactive compounds on filter papers used in microbiology research. The intent of this instrument is to replace film autoradiography with an electronic imaging system which can analyze samples 75 to 110 times faster than film. The second application involved the development of an intraoperative imaging probe to help surgeons identify cancerous tissue and ensure its complete removal. This instrument will replace a non-imaging probe now in use at many hospitals. A third prototype instrument under evaluation is an imaging nuclear survey system which obtains both a video and gamma ray image for the purpose of locating and quantifying radioactive materials. This system would be used at nuclear power plants and radioactive materials preparation facilities. A modification of this system could be built into robots used for inspecting and repairing power plants.

Ad-Hoc Queries over Document Collections - A Case Study

NASA Astrophysics Data System (ADS)

Löser, Alexander; Lutter, Steffen; Düssel, Patrick; Markl, Volker

We discuss the novel problem of supporting analytical business intelligence queries over web-based textual content, e.g., BI-style reports based on 100.000's of documents from an ad-hoc web search result. Neither conventional search engines nor conventional Business Intelligence and ETL tools address this problem, which lies at the intersection of their capabilities. "Google Squared" or our system GOOLAP.info, are examples of these kinds of systems. They execute information extraction methods over one or several document collections at query time and integrate extracted records into a common view or tabular structure. Frequent extraction and object resolution failures cause incomplete records which could not be joined into a record answering the query. Our focus is the identification of join-reordering heuristics maximizing the size of complete records answering a structured query. With respect to given costs for document extraction we propose two novel join-operations: The multi-way CJ-operator joins records from multiple relationships extracted from a single document. The two-way join-operator DJ ensures data density by removing incomplete records from results. In a preliminary case study we observe that our join-reordering heuristics positively impact result size, record density and lower execution costs.

Yeast Starter as a Biotechnological Tool for Reducing Copper Content in Wine

PubMed Central

Capece, Angela; Romaniello, Rossana; Scrano, Laura; Siesto, Gabriella; Romano, Patrizia

2018-01-01

Copper is widely used in agriculture as a traditional fungicide in organic farming to control downy mildew on grapes, consequently it is possible to find this metal during all stages of the vinification process. Low amounts of copper play a key role on the function of key cell enzymes, whereas excess quantities can exert amount-dependent cytotoxicity, resulting in general cellular damage. Nowadays the excessive copper ions in wines is removed by addition of adsorbents, but these additives can influence the sensory characteristics of wine, as well as detrimental to the health of consumers. It is well known that high concentrations of Cu2+ can be toxic to yeasts, inhibiting growth and activity, causing sluggish fermentation and reducing alcohol production. In this study, 47 S. cerevisiae strains were tested for copper tolerance by two different tests, growth on copper added medium and fermentative activity in copper added grape must. The results obtained by the two different tests were comparable and the high strain variability found was used to select four wild strains, possessing this characteristic at the highest (PP1-13 and A20) and the lowest level (MPR2-24 and A13). The selected strains were tested in synthetic and natural grape must fermentation for ability to reduce copper content in wine. The determination of copper content in wines and yeast cells revealed that at the lowest copper residual in wine corresponded the highest content in yeast cells, indicating a strong strain ability to reduce the copper content in wine. This effect was inversely correlated with strain copper resistance and the most powerful strain in copper reduction was the most sensitive strain, MPR2-24. This wild strain was finally tested as starter culture in cellar pilot scale fermentation in comparison to a commercial starter, confirming the behavior exhibited at lab scale. The use of this wild strain to complete the alcoholic fermentation and remove the copper from wine represents a biotechnological sustainable approach, as alternative to the chemical-physical methods, ensuring at the same time a completed alcoholic fermentation and organoleptic quality of wine. PMID:29375502

Evaluation of a Centyrin-Based Near-Infrared Probe for Fluorescence-Guided Surgery of Epidermal Growth Factor Receptor Positive Tumors.

PubMed

Mahalingam, Sakkarapalayam M; Dudkin, Vadim Y; Goldberg, Shalom; Klein, Donna; Yi, Fang; Singhal, Sunil; O'Neil, Karyn T; Low, Philip S

2017-11-15

Tumor-targeted near-infrared fluorescent dyes have the potential to improve cancer surgery by enabling surgeons to locate and resect more malignant lesions where good visualization tools are required to ensure complete removal of malignant tissue. Although the tumor-targeted fluorescent dyes used in humans to date have been either small organic molecules or high molecular weight antibodies, low molecular weight protein scaffolds have attracted significant attention because they penetrate solid tumors almost as efficiently as small molecules, but can be infinitely mutated to bind almost any antigen. Here we describe the use of a 10 kDa protein scaffold, a Centyrin, to target a near-infrared fluorescent dye to tumors that overexpress the epidermal growth factor receptor (EGFR) for fluorescence-guided surgery (FGS). We have developed and optimized the dose and time required for imaging small tumor burdens with minimal background fluorescence in real-time fluorescence-guided surgery of EGFR-expressing tumor xenografts in murine models. We demonstrate that the Centyrin-near-infrared dye conjugate (CNDC) binds selectively to human EGFR + cancer cells with an EC 50 of 2 nM, localizes to EGFR + tumor xenografts in athymic nude mice and that uptake of the dye in xenografts is significantly reduced when EGFR are blocked by preinjection of excess unlabeled Centyrin. Taken together, these data suggest that CNDCs can be used for intraoperative identification and surgical removal of EGFR-expressing lesions and that Centyrins targeted to other tumor-specific antigens should prove similarly useful in fluorescence guided surgery of cancer. In addition, we demonstrate that the CNDC is detected in the NIR region of the spectrum and can be utilized for fluorescence-guided surgery (FGS). In addition, we propose that with its eventual complete clearance from EGFR-negative tissues and its quantitative retention in the tumor mass for >24 h, a Centyrin-targeted NIR dye should provide excellent tumor contrast when injected at least 6-8 h before initiation of cancer surgery in human patients.

Getting an Early Start on Early Child Development. Education Notes. 30194

ERIC Educational Resources Information Center

Young, Mary Eming; Dunkelberg, Erika

2004-01-01

The children born this year--2004--will be eleven years old in 2015--the age of primary school completion in most countries. This is the MDG (Millennium Development Goal) generation--for whom the international community has pledged that by 2015, all children will be able to complete primary schooling. Ensuring good early child development is the…

76 FR 82313 - Intent To Request Renewal From OMB of One Current Public Collection of Information...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-30

... Security Officer (TSO) to ensure their qualifications to perform TSO duties pursuant to 49 U.S.C 44965. In certain cases, TSO candidates' health care providers may be asked to complete supplemental forms. DATES... candidates and, in certain cases, supplemental forms completed by TSO candidates' health care providers. The...

Natural language processing and inference rules as strategies for updating problem list in an electronic health record.

PubMed

Plazzotta, Fernando; Otero, Carlos; Luna, Daniel; de Quiros, Fernan Gonzalez Bernaldo

2013-01-01

Physicians do not always keep the problem list accurate, complete and updated. To analyze natural language processing (NLP) techniques and inference rules as strategies to maintain completeness and accuracy of the problem list in EHRs. Non systematic literature review in PubMed, in the last 10 years. Strategies to maintain the EHRs problem list were analyzed in two ways: inputting and removing problems from the problem list. NLP and inference rules have acceptable performance for inputting problems into the problem list. No studies using these techniques for removing problems were published Conclusion: Both tools, NLP and inference rules have had acceptable results as tools for maintain the completeness and accuracy of the problem list.

Remedy for Repeated Implant Retained Denture Fracture-A Challenging Case Report

PubMed Central

Reddy M, Ramu; Metta, Kiran Kumar; Charry N, Sudheer; B, Chittaranjan

2014-01-01

The most common site of fracture in a maxillary or a mandibular complete denture is along an anteroposterior line that coincides with the labial notch in in the denture which used to provide the frenum relief. Osseointegrated implants have been a boon to the patients who are completelly edentulous and are not satisfied with the conventional removable complete denture approach.Implant supported dentures have proven to provide superior retention and support for removable complete dentures. Nevertheless, fracture of the denture bases is a common complication of implant-supported mandibular overlay dentures,ecspecially when the artificial denture is opposing natural dentition. This article describes and illustrates a method of reinforcing implant-supported mandibular overdentures to overcome this problem. PMID:25584333

[Mini-percutaneous nephrolithotomy in the treatment of un-hydronephrotic cata-staghorn renal calculi].

PubMed

Gao, Ning; Chen, He-Qun; Qi, Lin; Yang, Zhong-Qing; Qi, Fan; Zhang, Xiang-Yang

2007-08-01

To evaluate the surgical techniques and clinical effects of mini-percutaneous nephrolithotomy (mini-PCNL) in the treatment of un-hydronephrotic cata-staghorn renal calculi. The clinical data of 46 cases (31 males and 15 females) treated by mini-PCNL were retrospectively analyzed. There were mono-renal calculi in 38 patients (3 patients were the isolated renal calculi) while the other 8 combined opposite side upper urinary tract calculi. The diameter of calculi ranged from 4.2 to 6.4 (mean=5.2) cm. Puncturation was guided by B-type ultrasound. Lithotripsy by air pressure path lithotripter and/or holmium laser was done when the pervium was established. The pervium in the 46 patients was successfully established by one-session puncturation with B-type ultrasonography guidance. The operative time ranged from 140 to 280 (mean=190) min. The amount of blood ranged from 50 to 200 (mean=100) mL and no one needed blood transfusion. Calculus was completely removed in 18 patients (39.1%). Calculi in 10 patients (21.7%) were completely removed among the 20 patients who underwent second-look mini-PCNL. Calculi in 1 of the 3 cases were completely removed by third-look mini-PCNL. Left-over calculi in 17 patients (8 patients after the first time mini-PCNL, 7 patients after second-look, and 2 patients after third-look) were treated by extracorporeal shock-wave lithotripsy (ESWL) and 8 were removed completely. All the 46 patients were followed up for 4 to 48 months. None of them had nephro-hydrops or stenosis. Renal function re-investigation showed that 8 patients recovered and 2 improved in the 10 patients who had azotemia before. Two (5.4%, 2/37) had calculus recurrence in 37 cases which calculi were completely removed before. The size and amount of left-over calculi in 3 patients (33.3%, 3/9) were increasing. Mini-PCNL is effective and causes less trauma for un-hydronephrotic cata-staghorn renal calculi. Mini-PCNL combined ESWL may substitute the open operation and is the preferred method for un-hydronephrotic renal cata-staghorn calculi.

CONTAMINANT FLUX RESPONSES TO THERMAL TREATMENT OF DNAPL SOURCE ZONES (ABSTRACT ONLY)

EPA Science Inventory

Contaminant flux is being proposed as a metric to help elucidate the benefits of DNAPL source-zone remedial efforts. While it is clear that aggressive remediation technologies can rapidly remove DNAPL mass, experience has shown that complete removal is often not practicable. H...

46 CFR Sec. 4 - General provisions.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... (a) All slop chest items, damaged or otherwise, shall be removed or transferred only in compliance with applicable regulations dealing with Property Removals. (b) In the transfer of a vessel from one General Agent to another General Agent the physical transfer of the complete slop chest shall also be...

46 CFR Sec. 4 - General provisions.

Code of Federal Regulations, 2011 CFR

2011-10-01

.... (a) All slop chest items, damaged or otherwise, shall be removed or transferred only in compliance with applicable regulations dealing with Property Removals. (b) In the transfer of a vessel from one General Agent to another General Agent the physical transfer of the complete slop chest shall also be...

76 FR 62835 - Notice of Inventory Completion: Fort Lewis College, Durango, CO

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-11

... objects are 1 complete bowl, 1 reconstructed piece of pottery, 2 smaller reconstructed pieces of pottery..., Colorado''). In 1967-1968, human remains representing a minimum of six individuals were removed from a site...

Determination of biological removal of recalcitrant organic contaminants in coal gasification waste water.

PubMed

Ji, Qinhong; Tabassum, Salma; Yu, Guangxin; Chu, Chunfeng; Zhang, Zhenjia

2015-01-01

Coal gasification waste water treatment needed a sustainable and affordable plan to eliminate the organic contaminants in order to lower the potential environmental and human health risk. In this paper, a laboratory-scale anaerobic-aerobic intermittent system carried out 66 operational cycles together for the treatment of coal gasification waste water and the removal capacity of each organic pollutant. Contaminants included phenols, carboxylic acids, long-chain hydrocarbons, and heterocyclic compounds, wherein the relative content of phenol is up to 57.86%. The long-term removal of 77 organic contaminants was evaluated at different hydraulic retention time (anaerobic24 h + aerobic48 h and anaerobic48 h +aerobic48 h). Contaminant removal ranged from no measurable removal to near-complete removal with effluent concentrations below the detection limit. Contaminant removals followed one of four trends: steady-state removal throughout, increasing removal to steady state (acclimation), decreasing removal, and no removal. Organic degradation and transformation in the reaction were analysed by gas chromatography/mass spectrometry technology.

78 FR 64006 - Notice of Inventory Completion: Thomas Burke Memorial Washington State Museum, University of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-25

... inventory of human remains under the control of the Burke Museum. The human remains were removed from Island....R50000] Notice of Inventory Completion: Thomas Burke Memorial Washington State Museum, University of... Memorial Washington State Museum, University of Washington (Burke Museum), has completed an inventory of...

78 FR 22288 - Notice of Inventory Completion: The Florida Department of State, Division of Historical Resources...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-15

... State, Division of Historical Resources, has completed an inventory of human remains, in consultation... of the Florida Department of State, Division of Historical Resources. The human remains were removed....R50000] Notice of Inventory Completion: The Florida Department of State, Division of Historical Resources...

Physician recruitment success: how to acquire top physician talent.

PubMed

Rosman, Judy

2011-01-01

This article provides step-by-step instructions on how to complete the strategic planning needed to ensure success in physician recruitment efforts, outlines how to build a successful recruitment team, and provides helpful advice to avoid common recruiting mistakes that can sabotage the recruitment efforts of even the best practices. This article discusses the role of the in-house hospital recruiter in the recruitment process, how to evaluate independent search firms, how to make use of the physicians in your group to ensure success during a site visit, and how to ensure that your new hire will be able to successfully develop a practice. The article also discusses how to find and use benchmarking data to ensure that your compensation package is competitive, and provides advice on how to help your new physician hit the ground running.

Clinical interpretation of a masticatory normative indicator analysis of masticatory function in subjects with different occlusal and prosthodontic status.

PubMed

Witter, Dick J; Woda, Alain; Bronkhorst, Ewald M; Creugers, Nico H J

2013-05-01

To analyse the masticatory function of subjects characterised by different occlusal and prosthodontic status. Using Optosil(®) as a test food, the masticatory normative indicator (MNIOPT) was used to differentiate between sufficient ('normal') and impaired masticatory function. Outcomes of occlusal force and masticatory tests were aggregated from three earlier studies dealing with four denture groups and three natural dentition groups. The four denture groups had a complete removable dental prosthesis in the upper jaw, and displayed one of the four following lower jaw prosthodontic rehabilitations: (i) complete removable dental prosthesis on a low mandible; (ii) complete removable dental prosthesis on a higher mandible; (iii) overdenture on natural roots; and (iv) overdenture on dental implants. The three natural dentition groups were: (i) shortened dental arch; (ii) complete dentition in older participants, and (iii) complete dentition in younger participants. All participants were women. They performed the same tests twice, and outcomes were averaged. A MNIOPT value of 3.68 mm was determined from the participants with complete natural dentitions. Applying the MNIOPT to the participants in the denture groups pointed at a considerable chance for impaired masticatory function, except for participants in the overdenture -implants group. The four denture groups compensated for reduced masticatory efficiency by increased number of masticatory cycles and prolonged mastication time until 'swallowing'. Nevertheless, they also 'swallowed' larger particles compared to the complete dentition group. For a given patient or for a group of subjects with specific dental conditions, MNI enables to discriminate between a sufficient ('normal') and an impaired masticatory function. Copyright © 2013 Elsevier Ltd. All rights reserved.

Research competency and specialist registration: Quo vadis ?

PubMed

Szabo, C P; Ramlall, S

2016-12-01

The requirement of 'research completion' as necessary for specialist registration with the Health Professions Council of South Africa (HPCSA) has recently been subject to legal action, with a court order potentially shifting requirements beyond those envisaged by the HPCSA. The research requirement is congruent with National Department of Health strategy in this regard, i.e. the strengthening of research as a stated priority. While the expectation of research competency is not in itself contentious, the capacity of institutions and the ability of registrars to facilitate and complete, respectively, have brought the issue into focus. Specifically, the apparent discrepancy between a court order and a regulation needs to be resolved to ensure that specialist registration is not unduly hampered, while ensuring that a potentially important contributor to a national priority is not prejudiced.

DEVELOPMENT OF NEW DRILLING FLUIDS

DOE Office of Scientific and Technical Information (OSTI.GOV)

David B. Burnett

2003-08-01

The goal of the project has been to develop new types of drill-in fluids (DIFs) and completion fluids (CFs) for use in natural gas reservoirs. Phase 1 of the project was a 24-month study to develop the concept of advanced type of fluids usable in well completions. Phase 1 tested this concept and created a kinetic mathematical model to accurately track the fluid's behavior under downhole conditions. Phase 2 includes tests of the new materials and practices. Work includes the preparation of new materials and the deployment of the new fluids and new practices to the field. The project addressesmore » the special problem of formation damage issues related to the use of CFs and DIFs in open hole horizontal well completions. The concept of a ''removable filtercake'' has, as its basis, a mechanism to initiate or trigger the removal process. Our approach to developing such a mechanism is to identify the components of the filtercake and measure the change in the characteristics of these components when certain cleanup (filtercake removal) techniques are employed.« less

Biopsy forceps is inadequate for the resection of diminutive polyps.

PubMed

Efthymiou, M; Taylor, A C; Desmond, P V; Allen, P B; Chen, R Y

2011-04-01

Cold biopsy forceps polypectomy (CBP) is often used for the removal of diminutive polyps. The efficacy of the technique has not been thoroughly assessed. The aim of this study was to prospectively assess the efficacy of CBP for removing diminutive polyps. This was a prospective study from St Vincent's Hospital, a tertiary referral hospital in Melbourne, Australia. A total of 143 patients were screened and 52 patients with ≥ 1 diminutive polyps were enrolled. CBP was used to resect diminutive polyps until no polyp tissue was visible. The polyp base was then resected using endoscopic mucosal resection (EMR) with a 1 - 2-mm margin. The CBP and EMR samples were compared to assess completeness of the resection. Overall 39 % (21 / 54) of diminutive polyps were completely resected using CBP. After binary logistic regression analysis, polyp histology was found to be predictive of resection, with complete resection of 62 % (13 / 21) for adenomas and 24 % (8 / 33) for hyperplastic polyps (odds ratio 5.1; P = 0.008). The size and number of bites taken with the forceps were not predictive of complete response. Within the limitations of a modest sample size, CBP appears to be inadequate treatment for the removal of diminutive polyps. © Georg Thieme Verlag KG Stuttgart · New York.

A Single Step Impression Technique of Flabby Ridges Using Monophase Polyvinylsiloxane Material: A Case Report

PubMed Central

Pai, Umesh Y.; Reddy, Vikram Simha; Hosi, Rushad Nariman

2014-01-01

Complete denture fabrication in clinically compromised situations such as flabby ridges is a challenging task for the clinician. Accurate impressioning of these tissues plays a major role in ensuring a well-fitting prosthesis. In this paper, the authors have proposed a newer technique of impression making of the flabby tissues using a combination of readily available newer and older materials to ensure an accurate and easy impression of these tissues. PMID:24872897

Inactivation and removal of influenza A virus H1N1 during the manufacture of plasma derivatives.

PubMed

Jeong, Eun Kyo; Sung, Hark Mo; Kim, In Seop

2010-11-01

Although transmission of pandemic influenza A virus H1N1 2009 is still occurring globally, little has been reported about how this outbreak has affected the safety of plasma derivatives. To evaluate the safety of plasma derivatives, dedicated virus clearance processes used during their production were investigated for their effectiveness in eliminating this virus of recent concern. In this study, influenza A virus H1N1 strain A/NWS/33 (H1N1) was chosen as a surrogate. H1N1 was completely inactivated by fraction IV fractionation as well as pasteurization during the manufacture of albumin. H1N1 was also effectively removed into the precipitate by fraction III fractionation and completely inactivated by low pH incubation as well as pasteurization during the manufacture of intravenous immunoglobulin. H1N1 was completely inactivated within 1 min of solvent/detergent treatment using 0.3% tri (n-butyl) phosphate and 1.0% Triton X-100 and also completely inactivated within 10 min of dry-heat treatment at 98 °C during the manufacture of factor VIII. H1N1 was completely removed by virus filtration process using Viresolve NFP filter and also completely inactivated by pasteurization during the manufacture of anti-thrombin III. These results indicate that all the virus clearance processes commonly used have sufficient H1N1 reducing capacity to achieve a high margin of safety. Copyright © 2010 The International Association for Biologicals. Published by Elsevier Ltd. All rights reserved.

Timing of silicone stent removal in patients with post-tuberculosis bronchial stenosis

PubMed Central

Eom, Jung Seop; Kim, Hojoong; Park, Hye Yun; Jeon, Kyeongman; Um, Sang-Won; Koh, Won-Jung; Suh, Gee Young; Chung, Man Pyo; Kwon, O. Jung

2013-01-01

CONTEXT: In patients with post-tuberculosis bronchial stenosis (PTBS), the severity of bronchial stenosis affects the restenosis rate after the silicone stent is removed. In PTBS patients with incomplete bronchial obstruction, who had a favorable prognosis, the timing of stent removal to ensure airway patency is not clear. AIMS: We evaluated the time for silicone stent removal in patients with incomplete PTBS. SETTINGS AND DESIGN: A retrospective study examined PTBS patients who underwent stenting and removal of a silicone stent. METHODS: Incomplete bronchial stenosis was defined as PTBS other than total bronchial obstruction, which had a luminal opening at the stenotic segment on bronchoscopic intervention. The duration of stenting was defined as the interval from stent insertion to removal. The study included 44 PTBS patients and the patients were grouped at intervals of 6 months according to the duration of stenting. RESULTS: Patients stented for more than 12 months had a significantly lower restenosis rate than those stented for less than 12 months (4% vs. 35%, P = 0.009). Multiple logistic regression revealed an association between stenting for more than 12 months and a low restenosis rate (odds ratio 12.095; 95% confidence interval 1.097-133.377). Moreover, no restenosis was observed in PTBS patients when the stent was placed more than 14 months previously. CONCLUSIONS: In patients with incomplete PTBS, stent placement for longer than 12 months reduced restenosis after stent removal. PMID:24250736

Sludge Retention Time as a Suitable Operational Parameter to Remove Both Estrogen and Nutrients in an Anaerobic–Anoxic–Aerobic Activated Sludge System

PubMed Central

Zeng, Qingling; Li, Yongmei; Yang, Shijia

2013-01-01

Abstract Estrogen in wastewater are responsible for a significant part of the endocrine-disrupting effects observed in the aquatic environment. The effect of sludge retention time (SRT) on the removal and fate of 17β-estradiol (E2) and 17α-ethinylestradiol (EE2) in an anaerobic–anoxic–oxic activated sludge system designed for nutrient removal was investigated by laboratory-scale experiments using synthetic wastewater. With a hydraulic retention time of 8 h, when SRT ranged 10–25 days, E2 was almost completely removed from water, and EE2 removal efficiency was 65%–81%. Both estrogens were easily sorbed onto activated sludge. Distribution coefficients (Kd) of estrogens on anaerobic sludge were greater than those on anoxic and aerobic sludges. Mass balance calculation indicated that 99% of influent E2 was degraded by the activated sludge process, and 1% remained in excess sludge; of influent EE2, 62.0%–80.1% was biodegraded; 18.9%–34.7% was released in effluent; and 0.88%–3.31% remained in excess sludge. Optimal SRT was 20 days for both estrogen and nutrient removal. E2 was almost completely degraded, and EE2 was only partly degraded in the activated sludge process. Residual estrogen on excess sludge must be considered in the sludge treatment and disposal processes. The originality of the work is that removal of nutrients and estrogens were linked, and optimal SRT for both estrogen and nutrient removal in an enhanced biological phosphorus removal system was determined. This has an important implication for the design and operation of full-scale wastewater treatment plants. PMID:23633892

Enhancement of oxygen transfer and nitrogen removal in a membrane separation bioreactor for domestic wastewater treatment.

PubMed

Chiemchaisri, C; Yamamoto, K

2005-01-01

Biological nitrogen removal in a membrane separation bioreactor developed for on-site domestic wastewater treatment was investigated. The bioreactor employed hollow fiber membrane modules for solid-liquid separation so that the biomass could be completely retained within the system. Intermittent aeration was supplied with 90 minutes on and off cycle to achieve nitrification and denitrification reaction for nitrogen removal. High COD and nitrogen removal of more than 90% were achieved under a moderate temperature of 25 degrees C. As the temperature was stepwise decreased from 25 to 5 degrees C, COD removal in the system could be constantly maintained while nitrogen removal was deteriorated. Nevertheless, increasing aeration supply could enhance nitrification at low temperature with benefit from complete retention of nitrifying bacteria within the system by membrane separation. At low operating temperature range of 5 degrees C, nitrogen removal could be recovered to more than 85%. A mathematical model considering diffusion resistance of limiting substrate into the bio-particle is applied to describe nitrogen removal in a membrane separation bioreactor. The simulation suggested that limitation of the oxygen supply was the major cause of inhibition of nitrification during temperature decrease. Nevertheless, increasing aeration could promote oxygen diffusion into the bio-particle. Sufficient oxygen was supplied to the nitrifying bacteria and the nitrification could proceed. In the membrane separation bioreactor, biomass concentration under low temperature operation was allowed to increase by 2-3 times of that of moderate temperature to compensate for the loss of bacterial activities so that the temperature effect was masked.

Job analysis of maintenance-mechanic position for the nuclear power plant maintenance personnel reliability model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Siegel, A.I.; Bartter, W.D.; Kopstein, F.F.

1982-06-01

The task list method of job survey was used. In collaboration with BWR and PWR personnel, a list of 107 tasks performed by maintenance mechanics was developed, grouped into: remove and install, test and repair, inspect and perform preventive maintenance, miscellaneous, communication, and report preparation. For each listed task, the questionnaire form inquired into: frequency of performance, task completion time, safety consequences of improper performance, and the amount of training required to perform the task proficiently. Scaled information was requested about seven abilities: (1) visual speed, accuracy, and recognition; (2) gross motor coordination; (3) fine manual dexterity; (4) strength andmore » stamina; (5) cognition; (6) memory; and (7) problem solving required for function completion. Survey forms were distributed to 27 nuclear power plants. Thirty-one maintenance mechanics representing 17 plants returned the completed forms. Frequency of performing tasks was bimodally distributed: (1) between once a year and once every six months, and (2) about once a week. More than half of the tasks have potential risk consequences if improperly performed. The five tasks with the greatest risk implications in the case of inadequate performance were: (1) remove and install reactor and dry-well heads, (2) test and repair reactor system components, (3) remove and install pressurizer mechanical relief valves, (4) test and repair pressurizer relief valves, (5) remove and install core spray pumps, seals, and valves. Hierarchically, the public risk associated with the various functions was: (1) remove and install, (2) test and repair, (3) preventive maintenance, (4) miscellaneous tasks, (5) communication, and (6) report preparation.« less

Bile Duct Cancer (Cholangiocarcinoma) Treatment (PDQ®)—Patient Version

Cancer.gov

Treatment of bile duct cancer depends on where the cancer has formed and if it can be removed by surgery (resectable) or not (unresectable). Most bile duct cancers cannot be completely removed by surgery. Other treatments include radiation, chemotherapy, and palliative therapies like stent placement and biliary bypass.

Bidding Documents for Asbestos Abatement in Oklahoma Public Buildings.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Education, Oklahoma City.

All relevant specifications and forms for the removal of asbestos from Oklahoma public buildings are consolidated in this document. The specifications cover the entire procedure for asbestos removal beginning with solicitation for bids; contractor's responsibilities concerning date of completion, general cleanup, laying out work, wage scale, and…

USE OF BONE CHAR FOR THE REMOVAL OF ARSENIC AND URANIUM FROM GROUNDWATER ATTHE PINE RIDGE RESERVATION

EPA Science Inventory

Using bench scale U removal capacity data with bone char, a preliminary point-of-use filter was developed using theoretical calculations. The design specifications were completed for the filter, and the manufacturing of the preliminary filter is currently underway. Through ...

CCCT - Patient Advocate Steering Committee

Cancer.gov

The Patient Advocate Steering Committee (PASC) works to ensure advocates involved with the Scientific Steering Committees (SSCs) are completely integrated in the development, implementation, and monitoring of clinical trials within those groups.

Experimental investigation of the fracture torque of orthodontic anchorage screws.

PubMed

Reimann, Susanne; Ayubi, Mustafa; McDonald, Fraser; Bourauel, Christoph

2016-07-01

In contrast to dental implants that remain in the bone, orthodontic anchorage screws serve as temporary anchorage for orthodontic tooth movement and are removed after completion of treatment. The aim of the present study was to evaluate the stability of various commercially available orthodontic anchorage screws against torsion. The torsional deflection of ten different orthodontic anchorage screws from different manufacturers [Ortho Easy Pin (Forestadent), Benefit, quattro (both PSM Medical Solutions), Vector TAS (Ormco), AbsoAnchor(®) (DENTOS Inc.), OrthoLox, Dual-Top JA (both Promedia Medizintechnik), TAD (3M Unitek), INFINITAS (ODS) and tomas(®) (Dentaurum)] was tested in vitro in relation to the rotation angle using a self-developed set-up. The screws were positioned in a resin model with bone-like material properties. Shear tests were performed using the manufacturers' own screwdrivers. Ten screws each were turned manually until a sudden drop in the measured torque occurred. At this point, the screw head was twisted off. Fracture torque and the torque at which the screws deformed plastically were evaluated. Mean values and standard deviations were calculated. According to the German industrial standard, the torque of orthodontic anchorage screws should reach at least 20 Ncm. The majority of the screws reached this nominal torque; however, a few screws fractured before reaching this value. Five screw types displayed plastic deformation below the threshold, at approximately 16 Ncm. The results suggest that orthodontic anchorage screws generally meet the requirements of the standard and ensure safe clinical use. However, according to the present data, it may be assumed that a portion of the screws will be plastically deformed upon removal.

Safeguarding Fertility With Whole Ovary Cryopreservation and Microvascular Transplantation: Higher Follicular Survival With Vitrification Than With Slow Freezing in a Ewe Model.

PubMed

Torre, Antoine; Vertu-Ciolino, Delphine; Mazoyer, Claire; Selva, Jacqueline; Lornage, Jacqueline; Salle, Bruno

2016-09-01

In young women, ovarian cortex cryopreservation before gonadotoxic chemotherapy and its avascular grafting after cancer healing permitted fertility restoration. However, ischemia reduced the grafts' lifespan. Microvascular transplantation of cryopreserved whole ovary may allow immediate revascularization, ensuring better fertility preservation, but the best cryopreservation method is unknown. We aimed to compare slow freezing and vitrification of whole ovary for fertility preservation purposes, in an ewe model. Twelve ewes were allocated at random to slow freezing (n = 6) or vitrification group (n = 6). Ewes' left ovary was removed and cryopreserved. Dimethyl sulfoxide 2 M was used as cryoprotector for slow freezing. Vitrification was obtained using increasing concentrations of a vitrification solution of the latest generation (VM3) and gradual temperature lowering to minimize toxicity. After a month, the right ovary was removed, the left ovary was thawed/warmed, and its vessels were anastomosed to the right pedicle. Fertility and ovarian function were assessed for 3 years. Ovarian follicles in native and transplanted ovaries were counted and compared at study completion. Hormonal secretion resumed in all ewes of both groups. One ewe of the slow-freezing group delivered healthy twins 1 year 9 months and 12 days after transplantation. Estimated whole follicle survival was very low in both groups but significantly higher after vitrification than after slow freezing (0.3% ± 0.5% vs 0.017% ± 0.019%, respectively; p < 0.05). Further progress is needed before whole-ovary cryopreservation can be considered an option for safeguarding fertility. Whole ovary vitrification provides better follicular survival compared to slow freezing and may be a valuable cryopreservation option.

Working with "H2S": facts and apparent artifacts.

PubMed

Wedmann, Rudolf; Bertlein, Sarah; Macinkovic, Igor; Böltz, Sebastian; Miljkovic, Jan Lj; Muñoz, Luis E; Herrmann, Martin; Filipovic, Milos R

2014-09-15

Hydrogen sulfide (H2S) is an important signaling molecule with physiological endpoints similar to those of nitric oxide (NO). Growing interest in its physiological roles and pharmacological potential has led to large sets of contradictory data. The principle cause of these discrepancies can be the common neglect of some of the basic H2S chemistry. This study investigates how the experimental outcome when working with H2S depends on its source and dose and the methodology employed. We show that commercially available NaHS should be avoided and that traces of metal ions should be removed because these can reduce intramolecular disulfides and change protein structure. Furthermore, high H2S concentrations may lead to a complete inhibition of cell respiration, mitochondrial membrane potential depolarization and superoxide generation, which should be considered when discussing the biological effects observed upon treatment with high concentrations of H2S. In addition, we provide chemical evidence that H2S can directly react with superoxide. H2S is also capable of reducing cytochrome c(3+) with the concomitant formation of superoxide. H2S does not directly react with nitrite but with NO electrodes that detect H2S. In addition, H2S interferes with the Griess reaction and should therefore be removed from the solution by Cd(2+) or Zn(2+) precipitation prior to nitrite quantification. 2-Phenyl-4,4,5,5-tetramethylimidazoline-1-oxyl 3-oxide (PTIO) is reduced by H2S, and its use should be avoided in combination with H2S. All these constraints must be taken into account when working with H2S to ensure valid data. Copyright © 2014 Elsevier Inc. All rights reserved.

A novel use of QR code stickers after orthopaedic cast application.

PubMed

Gough, A T; Fieraru, G; Gaffney, Pav; Butler, M; Kincaid, R J; Middleton, R G

2017-07-01

INTRODUCTION We present a novel solution to ensure that information and contact details are always available to patients while in cast. An information sticker containing both telephone numbers and a Quick Response (QR) code is applied to the cast. When scanned with a smartphone, the QR code loads the plaster team's webpage. This contains information and videos about cast care, complications and enhancing recovery. METHODS A sticker was designed and applied to all synthetic casts fitted in our fracture clinic. On cast removal, patients completed a questionnaire about the sticker. A total of 101 patients were surveyed between November 2015 and February 2016. The questionnaire comprised ten binary choice questions. RESULTS The vast majority (97%) of patients had the sticker still on their cast when they returned to clinic for cast removal. Eighty-four per cent of all patients felt reassured by the presence of the QR code sticker. Nine per cent used the contact details on the cast to seek advice. Over half (56%) had a smartphone and a third (33%) of these scanned the QR code. Of those who scanned the code, 95% found the information useful. CONCLUSIONS This study indicates that use of a QR code reassures patients and is an effective tool in the proactive management of potential cast problems. The QR code sticker is now applied to all casts across our trust. In line with NHS England's Five Year Forward View calling for enhanced use of smartphone technology, our trust is continuing to expand its portfolio of patient information accessible via QR codes. Other branches of medicine may benefit from incorporating QR codes as portals to access such information.

[New biodegradable polylactide implants (Polypin-C) in therapy for radial head fractures].

PubMed

Prokop, A; Jubel, A; Helling, H J; Udomkaewkanjana, C; Brochhagen, H G; Rehm, K E

2002-10-01

Dislocated radial head fractures of the type Mason II are usually treated with screws and buttress plates. The implants are generally removed at a later date. Biodegradable implants can be applied successfully for the reduction of small radial head fractures subject to shearing forces and slight loads. The implants are completely absorbed once the fracture has healed, making a second operation for the removal of the implant unnecessary. The Polypin C-Pin is made of poly(L, DL-lactide) mixed with 10% beta-tricalcium phosphate to ensure controlled, slow degradation with no significant side effects. This new Polypin C fixation pin was clinically tested on 35 patients with radial head fractures (CCF 21B2.1 and 21B2.2) from 31.10.1996 until 1.4.2002. A total of 34 of the patients (97.1%) underwent a clinical and conventional radiological follow-up examination after an average of 38.2 months. In 29 cases a CT was also carried out. Between 18 and 24 months, two cases of grade 1 osteolysis were observed around the pin head. No trace of osteolysis was observed at the final examination in either case. According to the Broberg score, an average of 96 out of a possible 100 points were attained at the final examination (31 excellent, 2 good, 1 unsatisfactory). After a period of 24 months, the pins were no longer visible on a conventional x-ray. A CT evaluation showed a density similar to that of spongioid bone in the original pin cavities after 3 years. These excellent clinical results prove that the Polypin C is a good method to treat dislocated radial head fractures.

Removing Shape-Preserving Transformations in Square-Root Elastic (SRE) Framework for Shape Analysis of Curves

PubMed Central

Joshi, Shantanu H.; Klassen, Eric; Srivastava, Anuj; Jermyn, Ian

2011-01-01

This paper illustrates and extends an efficient framework, called the square-root-elastic (SRE) framework, for studying shapes of closed curves, that was first introduced in [2]. This framework combines the strengths of two important ideas - elastic shape metric and path-straightening methods - for finding geodesics in shape spaces of curves. The elastic metric allows for optimal matching of features between curves while path-straightening ensures that the algorithm results in geodesic paths. This paper extends this framework by removing two important shape preserving transformations: rotations and re-parameterizations, by forming quotient spaces and constructing geodesics on these quotient spaces. These ideas are demonstrated using experiments involving 2D and 3D curves. PMID:21738385

Lonchakov on Service Module (SM) during Russian Extravehicular Activity (EVA) 21A

NASA Image and Video Library

2009-03-10

ISS018-E-039196 (10 March 2009) --- Cosmonaut Yury Lonchakov, Expedition 18 flight engineer, participates in a session of extravehicular activity (EVA) to perform maintenance on the International Space Station. During the 4-hour, 49-minute spacewalk, Lonchakov and astronaut Michael Fincke (out of frame), commander, reinstalled the Exposing Specimens of Organic and Biological Materials to Open Space (Expose-R) experiment on the universal science platform mounted to the exterior of the Zvezda Service Module. The spacewalkers also removed straps, or tape, from the area of the docking target on the Pirs airlock and docking compartment. The tape was removed to ensure it does not get in the way during the arrival of visiting Soyuz or Progress spacecraft.

Lonchakov on Service Module (SM) near 2AP-BKA during Russian Extravehicular Activity (EVA) 21A

NASA Image and Video Library

2009-03-10

ISS018-E-039147 (10 March 2009) --- Cosmonaut Yury Lonchakov, Expedition 18 flight engineer, participates in a session of extravehicular activity (EVA) to perform maintenance on the International Space Station. During the 4-hour, 49-minute spacewalk, Lonchakov and astronaut Michael Fincke (out of frame), commander, reinstalled the Exposing Specimens of Organic and Biological Materials to Open Space (Expose-R) experiment on the universal science platform mounted to the exterior of the Zvezda Service Module. The spacewalkers also removed straps, or tape, from the area of the docking target on the Pirs airlock and docking compartment. The tape was removed to ensure it does not get in the way during the arrival of visiting Soyuz or Progress spacecraft.

Lonchakov on Service Module (SM) near 2AP-BKA during Russian Extravehicular Activity (EVA) 21A

NASA Image and Video Library

2009-03-10

ISS018-E-039156 (10 March 2009) --- Cosmonaut Yury Lonchakov, Expedition 18 flight engineer, participates in a session of extravehicular activity (EVA) to perform maintenance on the International Space Station. During the 4-hour, 49-minute spacewalk, Lonchakov and astronaut Michael Fincke (out of frame), commander, reinstalled the Exposing Specimens of Organic and Biological Materials to Open Space (Expose-R) experiment on the universal science platform mounted to the exterior of the Zvezda Service Module. The spacewalkers also removed straps, or tape, from the area of the docking target on the Pirs airlock and docking compartment. The tape was removed to ensure it does not get in the way during the arrival of visiting Soyuz or Progress spacecraft.

Polypropylene Mesh Sling for Stress Urinary Incontinence: Does Memory Shaping of the Polypropylene Mesh Matter?

PubMed

Doering, Andrew; Azadi, Ali; Doering, David; Ostergard, Donald R

2017-12-22

We report a case of a mid-urethral sling (Advantage Fit™, Boston Scientific Corporation, Marlborough, Massachusetts) freshly removed from its original package. Upon removal from the packaging, the sling was noted to have a deformation in positioning at the midpoint, with curvature opposite the natural curve of the sling in the body. The images show the comparison to a sling with the desired positioning. Mid-urethral slings are commonly made from polypropylene mesh which has memory properties. It is important that manufacturers ensure that any steps in the processing or packaging of slings do not result in changes in the shape of the sling that may have unknown impacts on its clinical outcome.

Russian Module Photography of the Service Module (SM) during Russian Extravehicular Activity (EVA) 21A

NASA Image and Video Library

2009-03-10

ISS018-E-039022 (10 March 2009) --- Astronaut Michael Fincke, Expedition 18 commander, participates in a session of extravehicular activity (EVA) to perform maintenance on the International Space Station. During the 4-hour, 49-minute spacewalk, Fincke and cosmonaut Yury Lonchakov (out of frame) reinstalled the Exposing Specimens of Organic and Biological Materials to Open Space (Expose-R) experiment on the universal science platform mounted to the exterior of the Zvezda Service Module. The spacewalkers also removed straps, or tape, from the area of the docking target on the Pirs airlock and docking compartment. The tape was removed to ensure it does not get in the way during the arrival of visiting Soyuz or Progress spacecraft.

Enhancing the biofiltration of geosmin by seeding sand filter columns with a consortium of geosmin-degrading bacteria.

PubMed

McDowall, Bridget; Hoefel, Daniel; Newcombe, Gayle; Saint, Christopher P; Ho, Lionel

2009-02-01

Geosmin is a secondary metabolite that can be produced by many species of cyanobacteria and Actinomycetes. It imparts a musty/earthy taste and odour to drinking water which can result in consumer complaints and a general perception that there is a problem with the water quality. As geosmin is recalcitrant to conventional water treatment, processes are sought to ensure effective removal of this compound from potable water. Biological filtration (biofiltration) is an attractive option for geosmin removal as this compound has been shown to be biodegradable. However, effective biofiltration of geosmin can be site specific as it is highly dependent upon the types of organism present and there is often an extended acclimation period before efficient removals are achieved. We report here, a novel approach to enhance the biofiltration of geosmin by seeding sand filter columns with a bacterial consortium previously shown to be capable of effectively degrading geosmin. Geosmin removals of up to 75% were evident through sand columns which had been inoculated with the geosmin-degrading bacteria, when compared with non-inoculated sand columns where geosmin removals were as low as 25%. These low geosmin removals through the non-inoculated sand columns are consistent with previous studies and were attributed to physical/abiotic losses. The presence of an existing biofilm was shown to influence geosmin removal, as the biofilm allowed for greater attachment of the geosmin-degrading consortium (as determined by an ATP assay), and enhanced removals of geosmin. Minimal difference in geosmin removal was observed when the geosmin-degrading bacteria were inoculated into the sand columns containing either an active or inactive biofilm.

Intron self-complementarity enforces exon inclusion in a yeast pre-mRNA

PubMed Central

Howe, Kenneth James; Ares, Manuel

1997-01-01

Skipping of internal exons during removal of introns from pre-mRNA must be avoided for proper expression of most eukaryotic genes. Despite significant understanding of the mechanics of intron removal, mechanisms that ensure inclusion of internal exons in multi-intron pre-mRNAs remain mysterious. Using a natural two-intron yeast gene, we have identified distinct RNA–RNA complementarities within each intron that prevent exon skipping and ensure inclusion of internal exons. We show that these complementarities are positioned to act as intron identity elements, bringing together only the appropriate 5′ splice sites and branchpoints. Destroying either intron self-complementarity allows exon skipping to occur, and restoring the complementarity using compensatory mutations rescues exon inclusion, indicating that the elements act through formation of RNA secondary structure. Introducing new pairing potential between regions near the 5′ splice site of intron 1 and the branchpoint of intron 2 dramatically enhances exon skipping. Similar elements identified in single intron yeast genes contribute to splicing efficiency. Our results illustrate how intron secondary structure serves to coordinate splice site pairing and enforce exon inclusion. We suggest that similar elements in vertebrate genes could assist in the splicing of very large introns and in the evolution of alternative splicing. PMID:9356473

H2S and volatile fatty acids elimination by biofiltration: clean-up process for biogas potential use.

PubMed

Ramírez-Sáenz, D; Zarate-Segura, P B; Guerrero-Barajas, C; García-Peña, E I

2009-04-30

In the present work, the main objective was to evaluate a biofiltration system for removing hydrogen sulfide (H(2)S) and volatile fatty acids (VFAs) contained in a gaseous stream from an anaerobic digestor (AD). The elimination of these compounds allowed the potential use of biogas while maintaining the methane (CH(4)) content throughout the process. The biodegradation of H(2)S was determined in the lava rock biofilter under two different empty bed residence times (EBRT). Inlet loadings lower than 200 g/m(3)h at an EBRT of 81 s yielded a complete removal, attaining an elimination capacity (EC) of 142 g/m(3)h, whereas at an EBRT of 31 s, a critical EC of 200 g/m(3)h was reached and the EC obtained exhibited a maximum value of 232 g/m(3)h. For 1500 ppmv of H(2)S, 99% removal was maintained during 90 days and complete biodegradation of VFAs was observed. A recovery of 60% as sulfate was obtained due to the constant excess of O(2) concentration in the system. Acetic and propionic acids as a sole source of carbon were also evaluated in the bioreactor at different inlet loadings (0-120 g/m(3)h) obtaining a complete removal (99%) for both. Microcosms biodegradation experiments conducted with VFAs demonstrated that acetic acid provided the highest biodegradation rate.

Use of papain gel in disabled patients.

PubMed

Carrillo, C M; Tanaka, M H; Cesar, M F; Camargo, M A F; Juliano, Y; Novo, N F

2008-01-01

This study's purpose was to evaluate complete caries removal time (CCR) and patient acceptance of the chemomechanical caries removal agent and papain gel Papacárie in disabled patients. Fifty-one consecutive patients entered a prospective, controlled, randomized, open study. Patients were divided into 2 groups: (1) group 1=28 children 3 to 10 years old with or without visual or hearing impairments, motor disability on upper limbs, and inability to respond to simple orders; and (2) group 2=23 children, without visual or hearing impairments, with motor disability on the upper limbs and the ability to respond to simple orders. CCR time was measured in both groups. Patients' acceptance was assessed only in group 2 by using the visual analogy of face scale. The visual scale was presented in phase A--after the radiography with the child sitting on the dental chair before the beginning of the treatment, phase B--during the treatment, after total removal of the carious tissue and phase C--after the restoration was complete (treatment was finished). The total CCR average time was 8 minutes for each tooth when groups 1 and 2 were considered. Group 2 patients' acceptance in the first treatment was not statistically significant in all stages. Papacárie gel had a completed caries removal time of 8 minutes per tooth and is well accepted by the patients in all phases and in the first and subsequent visits.

Simultaneous removal of perchlorate and energetic compounds in munitions wastewater by zero-valent iron and perchlorate-respiring bacteria.

PubMed

Ahn, Se Chang; Hubbard, Brian; Cha, Daniel K; Kim, Byung J

2014-01-01

Ammonium perchlorate is one of the main constituents in Army's insensitive melt-pour explosive, PAX-21 in addition to RDX and 2,4-dinitroanisole (DNAN). The objective of this study is to develop an innovative treatment process to remove both perchlorate and energetic compounds simultaneously from PAX-21 production wastewater. It was hypothesized that the pretreatment of PAX-21 wastewater with zero-valent iron (ZVI) would convert energetic compounds to products that are more amenable for biological oxidation and that these products serve as electron donors for perchlorate-reducing bacteria. Results of batch ZVI reduction experiments showed that DNAN was completely reduced to 2,4-diaminoanisole and RDX was completely reduced to formaldehyde. Anaerobic batch biodegradation experiments showed that perchlorate (30 mg L(-1)) in ZVI-treated PAX-21 wastewater was decreased to an undetectable level after 5 days. Batch biodegradation experiments also confirmed that formaldehyde in ZVI-treated wastewater was the primary electron donor for perchlorate-respiring bacteria. The integrated iron-anaerobic bioreactor system was effective in completely removing energetic compounds and perchlorate from the PAX-21 wastewater without adding an exogenous electron donor. This study demonstrated that ZVI pretreatment not only removed energetic compounds, but also transformed energetic compounds to products that can serve as the source of electrons for perchlorate-respiring bacteria.

A novel reusable nanocomposite for complete removal of dyes, heavy metals and microbial load from water based on nanocellulose and silver nano-embedded pebbles.

PubMed

Suman; Kardam, Abhishek; Gera, Meeta; Jain, V K

2015-01-01

The present work proposed a nanocellulose (NC)-silver nanoparticles (AgNPs) embedded pebbles-based composite material as a novel reusable cost-effective water purification device for complete removal of dyes, heavy metals and microbes. NC was prepared using acid hydrolysis of cellulose. The AgNPs were generated in situ using glucose and embedded within the porous concrete pebbles by the technique of inter-diffusion of ion, providing a very strong binding of nanoparticles within the porous pebbles and thus preventing any nanomaterials leaching. Fabrication of a continual running water purifier was achieved by making different layering of NC and Ag nano-embedded pebbles in a glass column. The water purifier exhibited not only excellent dye and heavy metal adsorption capacity, but also long-term antibacterial activity against pathogenic and non-pathogenic bacterial strains. The adsorption mainly occurred through electrostatic interaction and pore diffusion also contributed to the process. The bed column purifier has shown 99.48% Pb(II) and 98.30% Cr(III) removal efficiency along with 99% decontamination of microbial load at an optimum working pH of 6.0. The high adsorption capacity and reusability, with complete removal of dyes, heavy metals and Escherichia coli from the simulated contaminated water of composite material, will provide new opportunities to develop a cost-effective and eco-friendly water purifier for commercial application.

Pesticide Registration Manual: Biopesticide Application Checklists Documents

EPA Pesticide Factsheets

These checklists are used by reviewers in the Biopesticide and Pollution Prevention Division in their review of pesticide registration applications. Applicants can use them to help ensure their packages are complete.

Penetrating Injury to Cauda Equina from a Missile Fragment, Completely Recovered after Delayed Surgical Removal of Ballistic Fragment.

PubMed

Harsha, Kamble Jayaprakash; Thomas, Anu

2018-01-01

Penetrating injuries to cauda equina due to missile fragment are rare. The mechanism of injury may be more complex due to thermal effect of missile fragment, apart from mechanisms described in penetrating gunshot injuries or stab injuries. We report a case of a 42-year-old male with penetrating missile injury to cauda equina, improved completely after delayed surgical exploration and removal of ballistic fragment. Furthermore, his bowel and bladder dysfunction improved completely within 1 week of neurosurgical exploration. Although early neurosurgical intervention is recommended for penetrating injuries of the cauda equina, delayed intervention may also be beneficial in selected patients. Computed tomography (CT) scan and CT myelogram are extremely useful in surgical planning when magnetic resonance imaging contraindicated due to impregnated metal fragments.

Validating the Inactivation Effectiveness of Chemicals on Ebola Virus.

PubMed

Haddock, Elaine; Feldmann, Friederike

2017-01-01

While viruses such as Ebola virus must be handled in high-containment laboratories, there remains the need to process virus-infected samples for downstream research testing. This processing often includes removal to lower containment areas and therefore requires assurance of complete viral inactivation within the sample before removal from high-containment. Here we describe methods for the removal of chemical reagents used in inactivation procedures, allowing for validation of the effectiveness of various inactivation protocols.

The pivotal role of offloading in the management of neuropathic foot ulceration.

PubMed

Wu, Stephanie C; Crews, Ryan T; Armstrong, David G

2005-12-01

Lower extremity amputations among persons with diabetes are generally preceded by neuropathic foot ulcerations. Healing of diabetic ulcerations in a timely manner is of central importance in any plan for amputation prevention. With sufficient vascular supply, appropriate débridement, and infection control, the primary mode of healing a diabetic neuropathic foot ulcer is pressure dispersion. The total contact cast has been deemed by many to be the gold standard in offloading; however, modification of a standard removable cast walker to ensure patient compliance may be as efficacious in healing diabetic foot ulcers as the total contact cast. Combining an effective, easy to use offloading device that ensures patient compliance with advanced wound healing modalities may form a formidable team in healing ulcers and potentially averting lower limb amputations.

Vomeronasal organ removal before sexual experience impairs male hamster mating behavior.

PubMed

Meredith, M

1986-01-01

Removal of vomeronasal chemoreceptors before sexual experience in male hamsters resulted in complete failure to mate in some animals but removal of these receptors after sexual experience had no effect. Animals were tested for mating behavior with intact behaviorally receptive females and also with anesthetized males scented with vaginal fluid. The two tests produced essentially the same result. Histological analysis of the lesions and radioimmunoassay of androgen levels showed no group differences, other than vomeronasal organ removal, that could account for the results. The behavioral data suggest that the vomeronasal system may be concerned with the production of preprogrammed behavior.

Fluorescence detection of malignant liver tumors using 5-aminolevulinic acid-mediated photodynamic diagnosis: principles, technique, and clinical experience.

PubMed

Inoue, Yoshihiro; Tanaka, Ryo; Komeda, Koji; Hirokawa, Fumitoshi; Hayashi, Michihiro; Uchiyama, Kazuhisa

2014-07-01

Photoactive drugs selectively accumulate in malignant tissue specimens and cause drug-induced fluorescence. Photodynamic diagnosis (PDD) and fluorescence can distinguish normal from malignant tissue. From May 2012 to September 2013, a total of 70 patients underwent hepatic resections using 5-ALA-mediated PDD for liver tumors at our hospital. 5-ALA fluorescence was detected in all hepatocellular carcinoma cases with serosa invasion. In liver metastasis from colorectal cancer cases with serosa invasion, 18 patients (85.7 %) were detected, and three patients (14.2 %) whose tumors showed complete response to neoadjuvant chemotherapy showed no fluorescence. Both superficial and deep malignant liver tumors were detected with 92.5 % sensitivity. Using 5-ALA-mediated PDD, tumors remaining at the cut surface and postoperative bile leakage were less frequent than in our previous hepatic resections using conventional white-light observation. Moreover, all malignant liver tumors were completely removed with a clear microscopic margin using 5-ALA, with a significant difference in resection margin width between 5-ALA-mediated PDD (6.7 ± 6.9 mm) and white-light observation (9.2 ± 7.0 mm; p = 0.0083). With the detection of malignant liver tumors, residual tumor and bile leakage at the cut surface of the remnant liver were improved by PDD with 5-ALA. This procedure may provide greater sensitivity than the conventional procedure. Furthermore, 5-ALA-mediated PDD can ensure histological clearance regardless of the resection margin and preserve as much liver parenchyma as possible in patients with impaired liver function.

Ready for practice: what child and family health nurses say about education.

PubMed

Fowler, Cathrine; Schmied, Virginia; Psaila, Kim; Kruske, Sue; Rossiter, Chris

2015-02-01

Australia has a well-established universal child and family health service predominately staffed by specialist/qualified child and family health nurses. Two common and interrelated concerns are the need for nurses to be ready for practice after completing a nursing education program and the means to ensure ongoing nursing competence. To investigate the readiness of CFH nurses to practise after qualification and their continuing engagement with learning. The study used an interpretive descriptive approach. This paper presents data from four questions from a larger survey of child and family health nurses across Australia. 1098 child and family health nurses responded to the survey. Qualitative survey responses from the four education questions were analysed using inductive thematic content analysis. Five significant themes were identified: hands-on experience (student clinical practice/placement); drawing on prior experience; learning on the job; learning (learning over time); and barriers to learning. This paper provides insights into nurses' readiness for practice at the completion of a postgraduate child and family health nursing qualification and their maintenance of competence and specialist knowledge. It highlights: the need for clinical placement to be retained and enhanced; the significant contribution of more experienced child and family health nurses mentoring newly graduated child and family health nurses; the need for minimum education standards; the importance of reviewing education courses in relation to graduates' readiness for child and family health nursing practice; the importance of supporting ongoing professional development; and the removal of barriers to accessing education opportunities. Copyright © 2014 Elsevier Ltd. All rights reserved.

Computing smallest intervention strategies for multiple metabolic networks in a boolean model.

PubMed

Lu, Wei; Tamura, Takeyuki; Song, Jiangning; Akutsu, Tatsuya

2015-02-01

This article considers the problem whereby, given two metabolic networks N1 and N2, a set of source compounds, and a set of target compounds, we must find the minimum set of reactions whose removal (knockout) ensures that the target compounds are not producible in N1 but are producible in N2. Similar studies exist for the problem of finding the minimum knockout with the smallest side effect for a single network. However, if technologies of external perturbations are advanced in the near future, it may be important to develop methods of computing the minimum knockout for multiple networks (MKMN). Flux balance analysis (FBA) is efficient if a well-polished model is available. However, that is not always the case. Therefore, in this article, we study MKMN in Boolean models and an elementary mode (EM)-based model. Integer linear programming (ILP)-based methods are developed for these models, since MKMN is NP-complete for both the Boolean model and the EM-based model. Computer experiments are conducted with metabolic networks of clostridium perfringens SM101 and bifidobacterium longum DJO10A, respectively known as bad bacteria and good bacteria for the human intestine. The results show that larger networks are more likely to have MKMN solutions. However, solving for these larger networks takes a very long time, and often the computation cannot be completed. This is reasonable, because small networks do not have many alternative pathways, making it difficult to satisfy the MKMN condition, whereas in large networks the number of candidate solutions explodes. Our developed software minFvskO is available online.

FROM CONCEPT TO REALITY, IN-SITU DECOMMISSIONING OF THE P AND R REACTORS AT THE SAVANNAH RIVER SITE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Musall, J.; Blankenship, J.; Griffin, W.

2012-01-09

SRS recently completed an approximately three year effort to decommission two SRS reactors: P-Reactor (Building 105-P) and R-Reactor (Building 105-R). Completed in December 2011, the concurrent decommissionings marked the completion of two relatively complex and difficult facility disposition projects at the SRS. Buildings 105-P and 105-R began operating as production reactors in the early 1950s with the mission of producing weapons material (e.g., tritium and plutonium-239). The 'P' Reactor and was shutdown in 1991 while the 'R' Reactor and was shutdown in 1964. In the intervening period between shutdown and deactivation & decommissioning (D&D), Buildings 105-P and 105-R saw limitedmore » use (e.g., storage of excess heavy water and depleted uranium oxide). For Building 105-P, deactivation was initiated in April 2007 and was essentially complete by June 2010. For Building 105-R, deactivation was initiated in August 2008 and was essentially complete by September 2010. For both buildings, the primary objective of deactivation was to remove/mitigate hazards associated with the remaining hazardous materials, and thus prepare the buildings for in-situ decommissioning. Deactivation removed the following hazardous materials to the extent practical: combustibles/flammables, residual heavy water, acids, friable asbestos (as needed to protect workers performing deactivation and decommissioning), miscellaneous chemicals, lead/brass components, Freon(reg sign), oils, mercury/PCB containing components, mold and some radiologically-contaminated equipment. In addition to the removal of hazardous materials, deactivation included the removal of hazardous energy, exterior metallic components (representing an immediate fall hazard), and historical artifacts along with the evaporation of water from the two Disassembly Basins. Finally, so as to facilitate occupancy during the subsequent in-situ decommissioning, deactivation implemented repairs to the buildings and provided temporary power.« less

77 FR 40893 - Desecheo National Wildlife Refuge, PR; Draft Comprehensive Conservation Plan and Environmental...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-11

... federally threatened Higo Chumbo cactus. Removal of invasive animal species would also continue, and we... animal species and would implement efforts to avoid introduction of new invasive species from increased... restoration efforts. Over the 15-year life of the CCP, we would complete the removal of all invasive animal...

Regenerating oaks with the shelterwood system

Treesearch

Ivan L. Sander

1979-01-01

It is well known that a new reproduction stand that follows complete overstory removal will contain oaks in proportion to the numbers and size of advance oak reproduction present before the overstory was removed. Furthermore, the individual advance oaks must be relatively large with well-established root systems before they will compete successfully and be dominant in...

A preview of Delaware's timber resource

Treesearch

Joseph E. Barnard; Teresa M. Bowers

1973-01-01

The recently completed forest survey of Delaware indicated little change in the total forest area since the 1957 estimate. Softwood volume and the acreage of softwood types decreased considerably. Hardwoods now comprise two-thirds of the volume and three-fourths of the forest area. Total average annual growth exceeded removals, but softwood removals exceeded average...

IN SITU OXIDATION AND ASSOCIATED MASS-FLUX-REDUCTION/MASS-REMOVAL BEHAVIOR FOR SYSTEMS WITH ORGANIC LIQUID LOCATED IN LOWER-PERMEABILITY SEDIMENTS

PubMed Central

Marble, Justin C.; Carroll, Kenneth C.; Janousek, Hilary; Brusseau, Mark L.

2010-01-01

The effectiveness of permanganate for in situ chemical oxidation of organic liquid (trichloroethene) trapped in lower-permeability (K) zones located within a higher-permeability matrix was examined in a series of flow-cell experiments. The permanganate solution was applied in both continuous and pulsed-injection modes. Manganese-oxide precipitation, as confirmed by use of SEM-EDS, occurred within, adjacent to, and downgradient of the lower-K zones, reflective of trichloroethene oxidation. During flow interruptions, precipitate formed within the surrounding higher-permeability matrix, indicating diffusive flux of aqueous-phase trichloroethene from the lower-K zones. The impact of permanganate treatment on mass flux behavior was examined by conducting water floods after permanganate injection. The results were compared to those of water-flood control experiments. The amount of water flushing required for complete contaminant mass removal was reduced for all permanganate treatments for which complete removal was characterized. However, the nature of the mass-flux-reduction/mass-removal relationship observed during water flooding varied as a function of the specific permanganate treatment. PMID:20685008

Effects of anaerobic digestion on chlortetracycline and oxytetracycline degradation efficiency for swine manure.

PubMed

Yin, Fubin; Dong, Hongmin; Ji, Chao; Tao, Xiuping; Chen, Yongxing

2016-10-01

Manure containing antibiotics is considered a hazardous substance that poses a serious health risk to the environment and to human health. Anaerobic digestion (AD) could not only treatment animal waste but also generate valuable biogas. However, the interaction between antibiotics in manure and the AD process has not been clearly understood. In this study, experiments on biochemical methane potential (BMP) were conducted to determine the inhibition of the AD process from antibiotics and the threshold of complete antibiotic removal. The thresholds of the complete antibiotic removal were 60 and 40mg/kg·TS for CTC and OTC, respectively. CTC and OTC with concentrations below thresholds could increase the BMP of manure. When the CTC and OTC concentrations exceeded the thresholds, they inhibited manure fermentation, and the CTC removal rate declined exponentially with concentration (60-500mg/kg·TS). The relationship between OTC antibiotic concentration and its removal rate in AD treatment was described with exponential (40-100mg/kg·TS) and linear equations (100-500mg/kg·TS). Copyright © 2016 Elsevier Ltd. All rights reserved.

Installation restoration program. Closure assessment report for UST removals at sites 4 and 5 - petroleum, oils, and lubricants facility. Virginia Air National Guard, 192nd Fighter Group, Richmond International Airport, Sandston, Virginia. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The objectives of the closure assessment were to determine the extent of contaminated soil adjacent to the USTs requiring excavation, to provide documentation of soil and groundwater conditions following excavation, and to document closure activities in accordance with applicable VADEQ regulations. During closure activities, ASI provided technical support to the Base to ensure that the UST removal contractor (E K, Inc.) hereinafter referred to as the Contractor was in compliance with the technical requirements (as specified in the Plans and Specifications for Removal of Abandoned Underground Storage Tanks, Virginia Air National Guard, Richmond International Airport, Sandston, VA., dated July 1991more » and revised April 1992, and Addendum Numbers 1 through 7) of the contract. ASI was also responsible for collecting soil and/or groundwater closure samples from the excavations, and providing off-site fixed based laboratory analysis to verify clean conditions within the excavations.« less

GSDO Crawler Tread Removal

NASA Image and Video Library

2014-03-28

CAPE CANAVERAL, Fla. – Inside the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida, ground support technicians attach crane lines to the treads on the C truck of crawler-transporter 2, or CT-2, so they can be lifted up and away. The treads are being removed in order to gain access to remove the gear boxes. Work continues in high bay 2 to upgrade CT-2. The modifications are designed to ensure CT-2’s ability to transport launch vehicles currently in development, such as the agency’s Space Launch System, to the launch pad. The Ground Systems Development and Operations Program office at Kennedy is overseeing the upgrades. For more than 45 years the crawler-transporters were used to transport the mobile launcher platform and the Apollo-Saturn V rockets and, later, space shuttles to Launch Pads 39A and B. For more information, visit: http://www.nasa.gov/exploration/systems/ground/crawler-transporter. Photo credit: NASA/Dimitri Gerondidakis

Biological removal of the xenobiotic trichloroethylene (TCE) through cometabolism in nitrifying systems.

PubMed

Kocamemi, B Alpaslan; Ceçen, F

2010-01-01

In the present study, cometabolic TCE degradation was evaluated using NH(4)-N as the growth-substrate. At initial TCE concentrations up to 845 microg/L, TCE degradation followed first-order kinetics. The increase in ammonium utilization rate favored the degradation of TCE. This ensured that biological transformation of TCE in nitrifying systems is accomplished through a cometabolic pathway by the catalysis of non-specific ammonia oxygenase enzyme of nitrifiers. The transformation yield (T(y)) of TCE, the amount of TCE degraded per unit mass of NH(4)-N, strongly depended on the initial NH(4)-N and TCE concentrations. In order to allow a rough estimation of TCE removal and nitrification at different influent TCE and NH(4)-N concentrations, a linear relationship was developed between 1/T(y) and the initial NH(4)-N/TCE ratio. The estimated T(y) values lead to the conclusion that nitrifying systems are promising candidates for biological removal of TCE through cometabolism.

Chemical treatment of wastewater from flue gas desulphurisation

NASA Astrophysics Data System (ADS)

Pasiecznik, Iwona; Szczepaniak, Włodzimierz

2017-11-01

The article presents results of laboratory tests of removing boron and arsenium from non-ideal solutions using double-layered magnesium/aluminium hydroxides (Mg/Al Double-Layered Hydroxide - DLH) produced with nitrate-chloride method. In research, wastewater from an installation for flue gas desulfurization was examined. Double-layered hydroxides are perfect absorbents for anionic compounds. The research proved high effectiveness of preparation with reference to arsenium, as well as confirmed the effect of presence of sulfatic and arsenate ions on the effectiveness of boron removal. On the basis of research on absorption kinetics a theoretical dose of DLH/NO3-Cl/M preparation was calculated and compared with a dose that ensures emimination of boron below the limit standarized by the national regulations. Application of double-layered magnesium/aluminium hydroxides for boron elimination from industrial wastewater requires significantly higher doses of preparation than those calculated in model investigations. It is due to the priority of removal of multivalent ions, such as sulfatic, arsenate or phosphate ions, by DLH/NO3-Cl/M.

Ion beam figuring of highly steep mirrors with a 5-axis hybrid machine tool

NASA Astrophysics Data System (ADS)

Yin, Xiaolin; Tang, Wa; Hu, Haixiang; Zeng, Xuefeng; Wang, Dekang; Xue, Donglin; Zhang, Feng; Deng, Weijie; Zhang, Xuejun

2018-02-01

Ion beam figuring (IBF) is an advanced and deterministic method for optical mirror surface processing. The removal function of IBF varies with the different incident angles of ion beam. Therefore, for the curved surface especially the highly steep one, the Ion Beam Source (IBS) should be equipped with 5-axis machining capability to remove the material along the normal direction of the mirror surface, so as to ensure the stability of the removal function. Based on the 3-RPS parallel mechanism and two dimensional displacement platform, a new type of 5-axis hybrid machine tool for IBF is presented. With the hybrid machine tool, the figuring process of a highly steep fused silica spherical mirror is introduced. The R/# of the mirror is 0.96 and the aperture is 104mm. The figuring result shows that, PV value of the mirror surface error is converged from 121.1nm to32.3nm, and RMS value 23.6nm to 3.4nm.

Effect of ultrasound on electrochemical chloride extraction from mortar

NASA Astrophysics Data System (ADS)

Chen, Yiqun; Yao, Wu; Zuo, Junqing

2018-03-01

In this paper, the effect of auxiliary ultrasound on electrochemical chloride extraction (ECE) was studied. The chloride removal efficiency was investigated by examining the chloride content with ultrasound-assisted ECE and changing the introducing time of ultrasound. The experimental results showed that removal of chloride ions was noted to be more effective in ECE treatment assisted with ultrasound treatment (UT). In addition, the lower w/c ratio led to more distinct effect of ultrasonic cavitation on chloride removal. Electrochemical behaviors measured with different treatment revealed that UT treatment was effective on moderating the corrosion condition. Microstructural analyses revealed a significant alteration in composition and morphology of cementitious phases with UT treatment. Pull-out tests indicated that ultrasound had a certain negative impact on the bond strength. Although the effect of introducing ultrasound in the first 2 weeks or the last 2 weeks on the extraction efficiency was not obvious, intermittent ultrasound could not only ensure the chloride extraction efficiency, but also reduce the adverse effect of ultrasound on the bond strength.

Gasification of Simplex briquets: briquet production. Vol. 1. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

A 7-ton/hr briquetting plant was installed at International Briquetting in Baltimore, Maryland, and used to produce 360 tons of Simplex briquets from Pittsburgh No. 8 seam, Champion No. 1 mine caking coal and shredded, air-classified Baltimore County refuse. The production of these briquets was funded by the Department of Energy, through the US Bureau of Mines, and a consortium comprised of the New York State Energy Research and Development Authority and the Empire State Electric Energy Research Company. This report describes the briquetting plant and discusses the problems that were encountered in producing the briquets. The following modifications are recommendedmore » for future Simplex briquetting plants: drying equipment should be installed on the RDF feed system to ensure that the RDF moisture is below 18%; the crushed coal must be dried to less than 4% moisture to ensure its free flow in the bins; magnets should be installed above the coal and RDF feed conveyors to remove any tramp metal; a 3/4-inch screen should be installed over the coal feed bin to remove any oversize rocks or lump coal; the RDF handling system and turbulizer discharge to the press should all be enclosed for dust control (the enclosures should be vented to a baghouse); only heavy duty apron conveyors should be used where belt conveyors are needed; briquetts should be cured if they are going to be stored in containers where they might sweat; and a screen with 1 1/4-inch openings should be used to remove the fines from 2 1/4-inch briquets (this screen should be sufficiently large to prevent briquets from crowding together on the screen).« less

Influence of pulse repetition rate on temperature rise and working time during composite filling removal with the Er:YAG laser.

PubMed

Correa-Afonso, Alessandra M; Pécora, Jesus Djalma; Palma-Dibb, Regina G

2008-06-01

The purpose of this study was to assess the efficacy of Er:YAG laser energy for composite resin removal and the influence of pulse repetition rate on the thermal alterations occurring during laser ablation. Composite resin filling was placed in cavities (1.0 mm deep) prepared in bovine teeth and the specimens were randomly assigned to five groups according to the technique used for composite filling removal. In group I (controls), the restorations were removed using a high-speed diamond bur. In the other groups, the composite fillings were removed using an Er:YAG laser with different pulse repetition rates: group 2-2 Hz; group 3-4 Hz; group 4-6 Hz; and group 5-10 Hz. The time required for complete removal of the restorative material and the temperature changes were recorded. Temperature rise during composite resin removal with the Er:YAG laser occurred in the substrate underneath the restoration and was directly proportional to the increase in pulse repetition rate. None of the groups had a temperature increase during composite filling removal of more than 5.6 degrees C, which is considered the critical point above which irreversible thermal damage to the pulp may result. Regarding the time for composite filling removal, all the laser-ablated groups (except for group 5 [10 Hz]) required more time than the control group for complete elimination of the material from the cavity walls. Under the tested conditions, Er:YAG laser irradiation was efficient for composite resin ablation and did not cause a temperature increase above the limit considered safe for the pulp. Among the tested pulse repetition rates, 6 Hz produced minimal temperature change compared to the control group (high-speed bur), and allowed composite filling removal within a time period that is acceptable for clinical conditions.

Gravity filtration performances of the bio-diatomite dynamic membrane reactor for slightly polluted surface water purification.

PubMed

Chu, Huaqiang; Dong, Bingzhi; Zhang, Yalei; Zhou, Xuefei

2012-01-01

A bio-diatomite dynamic membrane (BDDM) reactor for surface water treatment under a water head of 30, 40, 50, 60 and 70 cm, respectively, was investigated, which was very effective for pollutants removal. The water head exerted strong influences on filtration flux of BDDM during the precoating process, as well as on the formation of BDDM and turbidity variations. A high filtration flux (approximately 200-300 L/m2 h) could be achieved in the long filtration times of BDDM with a stable effluent turbidity of approximately 0.11-0.25 NTU. The BDDM could remove particles larger than 25 μm completely. The adopted sintered diatomite mainly consisted of macro pores, which were beneficial for improving the filtration flux of BDDM. During the backwash stage, the BDDM could be removed completely by the air backwash.

Degradation and removal of soybean allergen in Japanese soy sauce.

PubMed

Magishi, Norihiro; Yuikawa, Naoya; Kobayashi, Makio; Taniuchi, Shoichiro

2017-08-01

Soy sauce is a traditional fermented seasoning of Japan and is available throughout the world. The two main raw ingredients of soy sauce are soybean and wheat, both of which are established food allergens. The present study examined the degradation and removal of soybean allergens in soy sauce by immunoblotting with anti‑soybean protein antibody from rabbit and sera from two children with soybean allergy. It was demonstrated that soybean allergens were gradually degraded during the fermentation process, but were not completely degraded in raw soy sauce. During the processes of heat‑treatment and filtration, the soluble soybean allergens in raw soy sauce were denatured to insoluble allergens by heat‑treatment and subsequently completely removed from soy sauce by filtration. Therefore, to reduce the allergenicity of soy sauce, heat‑treatment and filtration are very important processes in addition to the enzymatic degradation during the fermentation of soy sauce.

Complete regression of a melanocytic nevus under intense pulsed light therapy for axillary hair removal in a cosmetic center.

PubMed

Martín, José M; Monteagudo, Carlos; Bella, Rebeca; Reig, Irela; Jordá, Esperanza

2012-01-01

Intense pulsed light (IPL) therapy using noncoherent broad-spectrum light has been reported to be effective for hair removal, and also for treating superficial pigmented lesions like ephelides and solar lentigines. We report complete regression of a pigmented melanocytic nevus, histologically confirmed, after hair removal treatment with IPL. The use of lasers and IPL is a common procedure used by dermatologists and even other professions for the treatment of cosmetically troubling skin conditions. The main advantage of such treatment is a reduction of surgical scars, thus producing a favorable cosmetic outcome, but a major limitation is that histopathologic diagnosis is not usually obtained prior to treatment. Such devices should be carefully used in patients with potentially dangerous melanocytic lesions. We also review the recent literature regarding inadequate treatment of melanocytic lesions with lasers. Copyright © 2012 S. Karger AG, Basel.

Pathways to Success: Integrating Learning with Life and Work to Increase National College Completion. A Report to the U.S. Congress and Secretary of Education

ERIC Educational Resources Information Center

Advisory Committee on Student Financial Assistance, 2012

2012-01-01

College completion rates are stagnant or falling today, particularly among young Americans, a trend that threatens to undermine the nation's global competitiveness and further exacerbate inequality in the nation's income distribution. In the past, efforts to ensure academic quality, access, and student success in higher education have produced…

The Impact of School Quality, Socioeconomic Factors, and Child Health on Students' Academic Performance: Evidence from Sri Lankan Primary Schools

ERIC Educational Resources Information Center

Aturupane, Harsha; Glewwe, Paul; Wisniewski, Suzanne

2013-01-01

One of the eight Millennium Development Goals is that all children in developing countries should complete primary education. Much progress has been made toward this goal, but completing primary school does not ensure that students attain basic literacy and numeracy skills. Indeed, there is ample evidence that many children in developing countries…

En bloc endoscopic submucosal dissection of a 14-cm laterally spreading adenoma of the rectum with involvement to the anal canal: expanding the frontiers of endoscopic surgery (with video).

PubMed

Antillon, Mainor R; Bartalos, Christopher R; Miller, Marc L; Diaz-Arias, Alberto A; Ibdah, Jamal A; Marshall, John B

2008-02-01

Endoscopic submucosal dissection (ESD) was recently developed in Japan for en bloc removal of laterally spreading tumors (LSTs). Although initially used for gastric tumors, ESD has now been applied to lesions elsewhere in the gut. Recent reports from Japan included removal of colorectal lesions up to 10 cm. To show the feasibility of ESD to remove en bloc, very large LSTs of the rectum, even when there is involvement to the dentate line. Case report. The procedure was performed at an American GI unit. The patient was admitted to the hospital after the procedure for observation. A 53-year-old patient, with a 14-cm tubulovillous adenoma of the rectum, which, at its maximal extent, involved two thirds of the circumference of the rectum. The tumor extended distally to the dentate line. En bloc submucosal dissection with a conventional needle-knife to remove the neoplasm. Completeness of en bloc removal of the tumor and subsequent follow-up endoscopy that showed no residual neoplasm. The tumor was able to be removed en bloc by ESD. The distal margin included squamous mucosa. At a 2.5-week endoscopic follow-up, a 3-mm focus of residual polyp was seen and removed. At the time of the last follow-up, there was complete healing of the wound and no residual neoplasm. Single case. This case demonstrated the feasibility of using ESD to remove large laterally spreading rectal tumors, including when there was involvement to the dentate line (and the dissection line must include squamous mucosa of the anal canal). ESD is a promising alternative to conventional surgical techniques; however, additional published experience is needed.

A comparison of hysteroscopic mechanical tissue removal with bipolar electrical resection for the management of endometrial polyps in an ambulatory care setting: preliminary results.

PubMed

Pampalona, Jennifer Rovira; Bastos, Maria Degollada; Moreno, Gemma Mancebo; Pust, Andrea Buron; Montesdeoca, Gemma Escribano; Guerra Garcia, Angel; Pruñonosa, Juan Carles Mateu; Collado, Ramon Carreras; Torras, Pere Bresco

2015-01-01

To assess and compare efficacy, pain, and the learning curve associated with diagnostic therapeutic hysteroscopy using mechanical tissue removal versus bipolar electrical resection in the management of endometrial polyps in an ambulatory care setting. A randomized controlled clinical trial (Canadian Task Force classification I). Hospital de Igulada, Barcelona, Spain. A total of 133 patients diagnosed with endometrial polyp(s) were included and randomly assigned to 1 of the 2 hysteroscopic methods. Criteria assessed were total hysteroscopy time, full polypectomy procedure time, pain experienced by patients, and learning curve of staff in training. The average time to perform total hysteroscopy using the mechanical tissue removal system (TRUCLEAR 5.0 System; Smith & Nephew Inc., Andover, MD) was 6 minutes 49 seconds versus 11 minutes 37 seconds required for the bipolar electrosurgery system (GYNECARE VERSAPOINT; Ethicon Inc, Somerville, NJ) (p < .01). Results for complete polypectomy time favored the TRUCLEAR System at 3 minutes 7 seconds over the VERSAPOINT System at 8 minutes 25 seconds (p < .01). If a successful procedure is predicated on access to cavity, visualization, and complete resection and excision of endometrial polyp, the mechanical TRUCLEAR Tissue Removal System shows a higher success rate than the VERSAPOINT Bipolar Electrosurgery System at 92% and 77%, respectively. Analysis of pain using the visual analog scale revealed no significant differences between the 2 techniques (p > .05). A study of the residents' learning curve showed a higher level of autonomy with hysteroscopy using the TRUCLEAR Tissue Removal System with which residents showed a higher level of confidence compared with hysteroscopy with the VERSAPOINT Bipolar Electrosurgery System. In hysteroscopic polypectomy, the mechanical tissue removal system was significantly faster, achieved a greater success rate for complete polypectomy, and required a shorter learning curve from staff being trained in the management of endometrial polyps when compared with bipolar electrical resection. Copyright © 2015 AAGL. Published by Elsevier Inc. All rights reserved.

Robust Structural Analysis and Design of Distributed Control Systems to Prevent Zero Dynamics Attacks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weerakkody, Sean; Liu, Xiaofei; Sinopoli, Bruno

We consider the design and analysis of robust distributed control systems (DCSs) to ensure the detection of integrity attacks. DCSs are often managed by independent agents and are implemented using a diverse set of sensors and controllers. However, the heterogeneous nature of DCSs along with their scale leave such systems vulnerable to adversarial behavior. To mitigate this reality, we provide tools that allow operators to prevent zero dynamics attacks when as many as p agents and sensors are corrupted. Such a design ensures attack detectability in deterministic systems while removing the threat of a class of stealthy attacks in stochasticmore » systems. To achieve this goal, we use graph theory to obtain necessary and sufficient conditions for the presence of zero dynamics attacks in terms of the structural interactions between agents and sensors. We then formulate and solve optimization problems which minimize communication networks while also ensuring a resource limited adversary cannot perform a zero dynamics attacks. Polynomial time algorithms for design and analysis are provided.« less

Removal of trace level amounts of twelve sulfonamides from drinking water by UV-activated peroxymonosulfate.

PubMed

Cui, Changzheng; Jin, Lei; Jiang, Lei; Han, Qi; Lin, Kuangfei; Lu, Shuguang; Zhang, Dong; Cao, Guomin

2016-12-01

Trace levels of residual antibiotics in drinking water may threaten public health and become a serious problem in modern society. In this work, we investigated the degradation of twelve sulfonamides (SAs) at environmentally relevant trace level concentrations by three different methods: ultraviolet (UV) photolysis, peroxymonosulfate (PMS) oxidation, and UV-activated PMS (UV/PMS). Sulfaguanidine, sulfadiazine, sulfamerazine, sulfamethazine, sulfathiazole, sulfamethoxydiazine, and sulfadimethoxine were be effectively removed by direct UV photolysis and PMS oxidation. However, sulfanilamide, sulfamethizole, sulfamethoxazole, sulfisoxazole, and sulfachloropyridazine were not completely degraded, despite prolonging the UV irradiation time to 30min or increasing the PMS concentration to 5.0mg·L -1 . UV/PMS provided more thorough elimination of SAs, as demonstrated by the complete removal of 200ng·L -1 of all SAs within 5min at an initial PMS concentration of 1.0mg·L -1 . UV/PMS promoted SA decomposition more efficiently than UV photolysis or PMS oxidation alone. Bicarbonate concentration and pH had a negligible effect on SA degradation by UV/PMS. However, humic acid retarded the process. Removal of 200ng·L -1 of each SA from a sample of sand-filtered effluent from a drinking water treatment plant (DWTPs) was quickly and completely achieved by UV/PMS. Meanwhile, about 41% of the total organic carbon (TOC) was eliminated. Scavenging experiments showed that sulfate radical (SO 4 - ) was the predominant species involved in the degradation. It is concluded that UV/PMS is a rapid and efficient method for removing trace-level SAs from drinking water. Copyright © 2016 Elsevier B.V. All rights reserved.

Removal of heavy metal ions by biogenic hydroxyapatite: Morphology influence and mechanism study

NASA Astrophysics Data System (ADS)

Wang, Dandan; Guan, Xiaomei; Huang, Fangzhi; Li, Shikuo; Shen, Yuhua; Chen, Jun; Long, Haibo

2016-08-01

Based on the synthesis of hydroxyapatite (HA) with different morphologies, such as nanorod-like, flower-like and sphere-like assembled HA nanorods, a new strategy has been developed for the removal of heavy metal ions such as Pb2+, Cu2+, Mn2+, Zn2+. The dependence of removal efficiency on the morphology and the suspended concentration of trapping agent, the removal time and selectivity were evaluated and discussed. The experimental results proved that the removal capacity of flower-like assembled HA nanorods (NAFL-HA) was the best, and the maximum removal ratio for Pb2+ ion was 99.97%. The mechanism of Pb2+ removal was studied in detail, noting that some metal ions were completely incorporated into hydroxyapatitie to produce Pb-HA. It reveals that the metal ions capture by HA is mainly controlled by sample surface adsorption and co-precipitation, which are directly controlled by sample morphology.

Autotrophic nitrogen removal process in a potable water treatment biofilter that simultaneously removes Mn and NH4(+)-N.

PubMed

Cai, Yan'an; Li, Dong; Liang, Yuhai; Zeng, Huiping; Zhang, Jie

2014-11-01

Ammonia (NH4(+)-N) removal pathways were investigated in a potable water treatment biofilter that simultaneously removes manganese (Mn) and NH4(+)-N. The results indicated a significant loss of nitrogen in the biofilter. Both the completely autotrophic nitrogen removal over nitrite (CANON) process and nitrification were more likely to contribute to NH4(+)-N removal. Moreover, the model calculation results demonstrated that the CANON process contributed significantly to the removal of NH4(+)-N. For influent NH4(+)-N levels of 1.030 and 1.749mg/L, the CANON process contribution was about 48.5% and 46.6%, respectively. The most important finding was that anaerobic ammonia oxidation (ANAMMOX) bacteria were detectable in the biofilter. It is interesting that the CANON process was effective even for such low NH4(+)-N concentrations. Copyright © 2014 Elsevier Ltd. All rights reserved.

Virus removal efficiency of Cambodian ceramic pot water purifiers.

PubMed

Salsali, Hamidreza; McBean, Edward; Brunsting, Joseph

2011-06-01

Virus removal efficiency is described for three types of silver-impregnated, ceramic water filters (CWFs) produced in Cambodia. The tests were completed using freshly scrubbed filters and de-ionized (DI) water as an evaluation of the removal efficiency of the virus in isolation with no other interacting water quality variables. Removal efficiencies between 0.21 and 0.45 log are evidenced, which is significantly lower than results obtained in testing of similar filters by other investigators utilizing surface or rain water and a less frequent cleaning regime. Other experiments generally found virus removal efficiencies greater than 1.0 log. This difference may be because of the association of viruses with suspended solids, and subsequent removal of these solids during filtration. Variability in virus removal efficiencies between pots of the same manufacturer, and observed flow rates outside the manufacturer's specifications, suggest tighter quality control and consistency may be needed during production.

A weighted variational gradient-based fusion method for high-fidelity thin cloud removal of Landsat images

NASA Astrophysics Data System (ADS)

Huang, Wei; Chen, Xiu; Wang, Yueyun

2018-03-01

Landsat data are widely used in various earth observations, but the clouds interfere with the applications of the images. This paper proposes a weighted variational gradient-based fusion method (WVGBF) for high-fidelity thin cloud removal of Landsat images, which is an improvement of the variational gradient-based fusion (VGBF) method. The VGBF method integrates the gradient information from the reference band into visible bands of cloudy image to enable spatial details and remove thin clouds. The VGBF method utilizes the same gradient constraints to the entire image, which causes the color distortion in cloudless areas. In our method, a weight coefficient is introduced into the gradient approximation term to ensure the fidelity of image. The distribution of weight coefficient is related to the cloud thickness map. The map is built on Independence Component Analysis (ICA) by using multi-temporal Landsat images. Quantitatively, we use R value to evaluate the fidelity in the cloudless regions and metric Q to evaluate the clarity in the cloud areas. The experimental results indicate that the proposed method has the better ability to remove thin cloud and achieve high fidelity.

The promise of a specially-designed graft copolymer of acrylic acid onto cellulose as selective sorbent for heavy metal ions.

PubMed

Essawy, Hisham A; Mohamed, Magdy F; Ammar, Nabila S; Ibrahim, Hanan S

2017-10-01

A specially-designed graft copolymer of acrylic acid onto in-situ formed cellulose-fulvate hybrid showed privileged tendency for uptake of Pb(II) during competitive removal from a mixture containing Cd(II) and Ni(II) within 5min at pH 5. This novel trend is attributed mainly to the crowded high content of coordinating centers within the designed graft copolymer along with the acquired superabsorbency. This provides an outstanding tool to separate some metal ions selectively from mixtures containing multiple ions on kinetic basis. Thus, the designed graft copolymer structure exhibited superior efficiency that reached ∼95% for sole removal of Pb(II). Kinetic modeling for Pb(II) individual removal showed excellent fitting with a pseudo second-order model. Intraparticle diffusion model on the other hand ensured governance of boundary layer effect over diffusion during the removal process due to the superabsorbency feature of the graft copolymer. The experimental findings were described with models such as Freundlich, Langmuir, and Dubinin-Radushkevich. The Langmuir and Freundlich models showed convenience with the adsorption isotherm of Pb(II) onto the developed graft copolymer. Copyright © 2017 Elsevier B.V. All rights reserved.

A first experience with digital complete overdentures.

PubMed

Bajunaid, Salwa Omar

2016-07-01

The development of computer-aided design/computer-aided manufacturing systems for dentistry in the 1980s resulted in the successful fabrication of crowns, fixed dental prostheses, and superstructures for both natural teeth and dental implants. Today, this technology is available for constructing digitally designed and milled, completely removable dental prostheses. The procedure uses clinical and laboratory protocols that allow fabrication of completely removable prostheses within two clinical appointments. The aim of this clinical report is to present the author's first experience with digital complete overdentures, the practicality of this technology, and patient feedback. Compared with conventional overdentures, the fit of the digital prostheses was improved because the cameo and flanges of the prostheses were nicely shaped and rolled, and this enhanced their stability and retention. Occlusion was also excellent. However, aesthetics in terms of the alignment, shape, and size of the maxillary overdenture teeth were inacceptable. Despite some of the drawbacks identified in our study, the use of removable digital dentures does provide excellent adaptation of the denture base and requires fewer clinic visits. We anticipate that the unsatisfactory aesthetic outcomes presented in this report can be corrected with more experience. We also believe that acquiring an in-house scanning machine would be beneficial. We highly recommend including this technique in dental school curriculums at both the undergraduate and graduate levels in order to keep students and residents up to date on the latest technology available.

Fe(II) oxidation during acid mine drainage neutralization in a pilot-scale Sequencing Batch Reactor.

PubMed

Zvimba, J N; Mathye, M; Vadapalli, V R K; Swanepoel, H; Bologo, L

2013-01-01

This study investigated Fe(II) oxidation during acid mine drainage (AMD) neutralization using CaCO3 in a pilot-scale Sequencing Batch Reactor (SBR) of hydraulic retention time (HRT) of 90 min and sludge retention time (SRT) of 360 min in the presence of air. The removal kinetics of Fe(II), of initial concentration 1,033 ± 0 mg/L, from AMD through oxidation to Fe(III) was observed to depend on both pH and suspended solids, resulting in Fe(II) levels of 679 ± 32, 242 ± 64, 46 ± 16 and 28 ± 0 mg/L recorded after cycles 1, 2, 3 and 4 respectively, with complete Fe(II) oxidation only achieved after complete neutralization of AMD. Generally, it takes 30 min to completely oxidize Fe(II) during cycle 4, suggesting that further optimization of SBR operation based on both pH and suspended solids manipulation can result in significant reduction of the number of cycles required to achieve acceptable Fe(II) oxidation for removal as ferric hydroxide. Overall, complete removal of Fe(II) during AMD neutralization is attractive as it promotes recovery of better quality waste gypsum, key to downstream gypsum beneficiation for recovery of valuables, thereby enabling some treatment-cost recovery and prevention of environmental pollution from dumping of sludge into landfills.

Design Evaluation for Personnel, Training and Human Factors (DEPTH) Final Report.

DTIC Science & Technology

1998-01-17

human activity was primarily intended to facilitate man-machine design analyses of complex systems. By importing computer aided design (CAD) data, the human figure models and analysis algorithms can help to ensure components can be seen, reached, lifted and removed by most maintainers. These simulations are also useful for logistics data capture, training, and task analysis. DEPTH was also found to be useful in obtaining task descriptions for technical

CSSC Fish Barrier Simulated Rescuer Touch Point Results, Operating Guidance, and Recommendations for Rescuer Safety

DTIC Science & Technology

2011-09-01

Testing Input electrodes consisting of 1/2” diameter, 6” long copper rods were wired to separate conductors of a shielded, commercially available...underwater-rated electrical cable (three-conductor, shielded, shipboard cable (TSS-2), 18 American Wire Gauge (AWG) stranded copper ). Electrode pairs...sandpaper prior to use to ensure the best electrical continuity between the water and electrode by removing any copper oxide. This electrode

Evaluating Polarization Data

NASA Astrophysics Data System (ADS)

Ireland, D. G.

2018-07-01

A method is presented, which ensures that different polarization observables describing one reaction channel are consistent with each other. Using the connection of the observables to the same underlying reaction amplitudes, a constrained estimate of the observables is carried out using a Markov Chain Monte Carlo method. Initial results indicate that the new estimates are guaranteed to be physical, and will remove the need for artificial fudge factors when these processed data are used in subsequent fits.

76 FR 17191 - Staff Accounting Bulletin No. 114

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-28

...This Staff Accounting Bulletin (SAB) revises or rescinds portions of the interpretive guidance included in the codification of the Staff Accounting Bulletin Series. This update is intended to make the relevant interpretive guidance consistent with current authoritative accounting guidance issued as part of the Financial Accounting Standards Board's Accounting Standards Codification. The principal changes involve revision or removal of accounting guidance references and other conforming changes to ensure consistency of referencing throughout the SAB Series.

Analytical, Characterization, and Stability Studies of Organic Chemical, Drugs, and Drug Formulation

DTIC Science & Technology

2014-05-21

stability studies was maintained over the entire contract period to ensure the continued integrity of the drug in its clinical use . Because our...facile automation. We demonstrated the method in principle, but were unable to remove the residual t-butanol to ɘ.5%. With additional research using ...to its use of ethylene oxide for sterilization, which is done in small batches. The generally recognized method of choice to produce a parenteral

Development and Analysis of Closed Cycle Circulator Elements.

DTIC Science & Technology

1980-05-01

circuits are mounted on cards accessible through a hinged rear panel for service or adjustments. Cards may be removed in groups of 3 for servicing without...voltage signal is processed in such a way that it became linearly related to velocity of the gas flow. The use of these modules ensures the frequency...most important idiagnostic to be measured optically. This test is broken down into two categories: a medium homogeneity category *1 in which

Threshold-Switchable Particles (TSP’s) to Control Internal Hemorrhage

DTIC Science & Technology

2011-12-01

solution was then centrifuged for 10 minutes at 3,500 RPM. The purified supernatant was collected and the malachite green assay (which quantifies...assay was performed again and both the malachite green and fluorescamine assays were perfomed to ensure that only free polyP was removed by the...and the pellet was washed and resuspended with 450 μL DI water. H. The centrifuging and washing was repeated twice. I. UV spectroscopy, malachite

The Revised SEND Code of Practice 0-25: Effective Practice in Engaging Children and Young People in Decision-Making about Interventions for Social, Emotional and Mental Health Needs

ERIC Educational Resources Information Center

Kennedy, Emma-Kate

2015-01-01

A key principle upon which the Revised Special Educational Needs and Disability (SEND) Code of Practice 0-25 (2015) is based is children's involvement in decision-making that affects them, and a significant change is the removal of the term "behaviour" and an emphasis on social, emotional and mental health (SEMH) needs. To ensure that…

Polyurethane Masks Large Areas in Electroplating

NASA Technical Reports Server (NTRS)

Beasley, J. L.

1985-01-01

Polyurethane foam provides effective mask in electroplating of copper or nickel. Thin layer of Turco maskant painted on area to be masked: Layer ensures polyurethane foam removed easily after served its purpose. Component A, isocyanate, and component B, polyol, mixed together and brushed or sprayed on mask area. Mixture reacts, yielding polyurethane foam. Foam prevents deposition of nickel or copper on covered area. New method saves time, increases productivity and uses less material than older procedures.

Quality by design approach for viral clearance by protein a chromatography

PubMed Central

Zhang, Min; Miesegaes, George R; Lee, Michael; Coleman, Daniel; Yang, Bin; Trexler-Schmidt, Melody; Norling, Lenore; Lester, Philip; Brorson, Kurt A; Chen, Qi

2014-01-01

Protein A chromatography is widely used as a capture step in monoclonal antibody (mAb) purification processes. Antibodies and Fc fusion proteins can be efficiently purified from the majority of other complex components in harvested cell culture fluid (HCCF). Protein A chromatography is also capable of removing modest levels of viruses and is often validated for viral clearance. Historical data mining of Genentech and FDA/CDER databases systematically evaluated the removal of model viruses by Protein A chromatography. First, we found that for each model virus, removal by Protein A chromatography varies significantly across mAbs, while remains consistent within a specific mAb product, even across the acceptable ranges of the process parameters. In addition, our analysis revealed a correlation between retrovirus and parvovirus removal, with retrovirus data generally possessing a greater clearance factor. Finally, we describe a multivariate approach used to evaluate process parameter impacts on viral clearance, based on the levels of retrovirus-like particles (RVLP) present among process characterization study samples. It was shown that RVLP removal by Protein A is robust, that is, parameter effects were not observed across the ranges tested. Robustness of RVLP removal by Protein A also correlates with that for other model viruses such as X-MuLV, MMV, and SV40. The data supports that evaluating RVLP removal using process characterization study samples can establish multivariate acceptable ranges for virus removal by the protein A step for QbD. By measuring RVLP instead of a model retrovirus, it may alleviate some of the technical and economic challenges associated with performing large, design-of-experiment (DoE)—type virus spiking studies. This approach could also serve to provide useful insight when designing strategies to ensure viral safety in the manufacturing of a biopharmaceutical product. PMID:23860745

Active cleaning technique for removing contamination from optical surfaces in space

NASA Technical Reports Server (NTRS)

Shannon, R. L.; Gillette, R. B.; Cruz, G. A.

1973-01-01

An active cleaning technique for removing contaminants from optical surfaces in space was investigated with emphasis on the feasibility of using plasma exposure as a means of in-situ cleaning. The major work accomplished includes: (1) development of an in-situ reflectometer for use in conjunction with the contaminant film deposition/cleaning facility; (2) completion of Apollo Telescope Mount (ATM) filter treatment experiments to assess the effects of plasma exposure on the UV transmittance; (3) attempts to correlate the atomic oxygen flux with cleaning rate; (4) completion of in-situ butadien contamination/plasma cleaning/UV reflectance measurement experiments; (5) carbon cleaning experiments using various gases; (6) completion of silicone contamination/cleaning experiments; and (7) experiments conducted at low chamber pressures to determine cleaning rate distribution and contamination of surfaces adjacent to those being cleaned.

Penetrating Injury to Cauda Equina from a Missile Fragment, Completely Recovered after Delayed Surgical Removal of Ballistic Fragment

PubMed Central

Harsha, Kamble Jayaprakash; Thomas, Anu

2018-01-01

Penetrating injuries to cauda equina due to missile fragment are rare. The mechanism of injury may be more complex due to thermal effect of missile fragment, apart from mechanisms described in penetrating gunshot injuries or stab injuries. We report a case of a 42-year-old male with penetrating missile injury to cauda equina, improved completely after delayed surgical exploration and removal of ballistic fragment. Furthermore, his bowel and bladder dysfunction improved completely within 1 week of neurosurgical exploration. Although early neurosurgical intervention is recommended for penetrating injuries of the cauda equina, delayed intervention may also be beneficial in selected patients. Computed tomography (CT) scan and CT myelogram are extremely useful in surgical planning when magnetic resonance imaging contraindicated due to impregnated metal fragments. PMID:29682053

The removal of low level inorganics via electrogenerated hydrogen peroxide in the presence of catalytic amounts of Fe2+.

PubMed

Marrosu, G; Petrucci, R; Trazza, A

2001-01-01

Low level phosphites and hypophosphites were completely converted into phosphates, via hydrogen peroxide generated by cathodic reduction of oxygen in acidic aqueous medium at a reticulated vitreous carbon electrode, in the presence of little amounts of Fe2+. The contemporary regeneration of Fe2+ by cathodic reduction of Fe3+, produced by the well known Fenton reaction, furnishes an excellent way to continuously produce little amounts of the Fenton reactive and, as a consequence, of the powerful oxidant hydroxyl radical HO.. The best conditions for the complete removal of phosphorous as phosphites and hypophosphites are reported.

Plant security during decommissioning; challenges and lessons learned from German phase out decision

DOE Office of Scientific and Technical Information (OSTI.GOV)

Renner, Andrea; Esch, Markus

2013-07-01

Purpose of this paper is to point out the security challenges that may occur during the decommissioning, based on the issues and lessons learned from the German phase out decision. Though national regulations may be different in other countries the basic problems and issues will be the same. Therefore presented solutions will be applicable in other countries as well. The radioactive material remaining at the NPP during decommissioning has the most influence on how the security measures have to be designed. The radioactive material defines the risk potential of the plant and this determines the needed security level. The followingmore » aspects have been challenging in Germany: - Scenarios varying from those, used for plants in operation, due to changed operating conditions - Spent fuel will stay in the spent fuel pool for a quite long period before it can be removed from the plant. Risk potential of the plant stays high and requires a high level of security measures - Security measures according to the existing operating license have to stay in place as they are, unless the first license for decommissioning is given respective the spent fuel is removed from the plant site. This even led to the question if improvements of security measures, planned and announced with focus on a plant remaining in operation for another couple of years, need to be done although they will not be required after removing the spent fuel from the plant. A further important aspect for the security design is the fact that a plant under decommissioning has completely different and strongly varying operating procedures, compared to the stable ones of an operating plant. This leads to different needs concerning workspace, infrastructure on plant site, access to buildings etc. An optimized and highly flexible security concept is needed to ensure an adequate level of security as well as an efficient decommissioning. A deep analysis of the vital plant functions, depending on the different decommissioning stages, is required to determine the vital equipment, its location and its need for protection. (authors)« less

The effect of processing parameters during heat treatment of bulk high-T(sub c) superconductors

NASA Astrophysics Data System (ADS)

Cha, Y. S.; Dorris, S. E.; Hull, J. R.; Poeppel, R. B.

1991-04-01

Plastic extrusion is a promising method for producing the long lengths of high-Tc superconductor that will be necessary to meet many potential applications. A crucial phase of the extrusion method is removal of organic constituents. Incomplete removal can leave residual carbon at grain boundaries, which can adversely affect the superconducting properties, whereas excessively rapid removal of the organics can cause the extruded superconductor to disintegrate completely. In this paper, we analyze the effects of the following aspects of organics removal, as they apply to the firing of extruded YBa2Cu3O(x) coils: (1) total pressure in the furnace, (2) oxygen flow, (3) heat conduction, and (4) diffusion of volatile components during removal of organics.

EPA Continues to Ensure Public Health Protection at Superfund Sites

EPA Pesticide Factsheets

EPA has completed comprehensive reviews of site cleanups at nine National Priorities List Sites (Superfund Sites), including four Federal Facilities, across New England by performing required Five-Year Reviews of each site.

The Plan to Certify America.

ERIC Educational Resources Information Center

Geber, Beverly

1995-01-01

The national skill standards project may take 10 years to complete and will be expensive to set up and maintain. Getting consensus from industry, unions, and educators and ensuring checks for fairness and nondiscrimination pose challenges. (SK)

Gastroenterologist: What Is a Gastroenterologist?

MedlinePlus

... overseen by national societies committed to ensuring high quality and uniform education. These groups include the American Board of Internal Medicine, the American College of Gastroenterology, the American ... quality training. Once fellows successfully complete their training they ...

Avian fruit preferences across a Puerto Rican forested landscape: pattern consistency and implications for seed removal.

PubMed

Carlo, Tomás A; Collazo, Jaime A; Groom, Martha J

2003-01-01

Avian fruit consumption may ensure plant reproductive success when frugivores show consistent preference patterns and effectively remove and disperse seeds. In this study we examined avian fruit preferences and their seed-removal services at five study sites in north-central Puerto Rico. At each site, we documented the diet of seven common fruit-eating avian species from February to September 1998. Using foraging observations and area-based estimates of fruit abundance, we examined preference patterns of birds. We found that 7 out of 68 fleshy-fruited plant species were responsible for most of the fruit diet of birds. Seventeen plant species were preferred and four of them were repeatedly preferred across several study sites and times by at least one avian species. Preferred plant species comprised a small percentage of fleshy fruits at each site (<15% in four out of five study sites), but showed extended phenology patterns. The quantity of seeds removed by frugivore species was not strictly related to preferences. Some frugivores showing no preference could effectively remove more seeds from plants at some locations than species exhibiting constancy in their patterns of preference. Only two frugivores, Euphonia musica and Vireo altiloquous, removed most of the seeds of plants for which they exhibited repeated preference across the landscape. Preference patterns, particularly those exhibiting consistency in space and time for plant species having prolonged fruiting periods, may have important mechanistic consequences for the persistence, succession, and regeneration of tropical plant communities.

Avian fruit preferences across a Puerto Rican forested landscape: Pattern consistency and implications for seed removal

USGS Publications Warehouse

Carlo, T.A.; Collazo, J.A.; Groom, Martha J.

2003-01-01

Avian fruit consumption may ensure plant reproductive success when frugivores show consistent preference patterns and effectively remove and disperse seeds. In this study we examined avian fruit preferences and their seed-removal services at five study sites in north-central Puerto Rico. At each site, we documented the diet of seven common fruit-eating avian species from February to September 1998. Using foraging observations and area-based estimates of fruit abundance, we examined preference patterns of birds. We found that 7 out of 68 fleshy-fruited plant species were responsible for most of the fruit diet of birds. Seventeen plant species were preferred and four of them were repeatedly preferred across several study sites and times by at least one avian species. Preferred plant species comprised a small percentage of fleshy fruits at each site (<15% in four out of five study sites), but showed extended phenology patterns. The quantity of seeds removed by frugivore species was not strictly related to preferences. Some frugivores showing no preference could effectively remove more seeds from plants at some locations than species exhibiting constancy in their patterns of preference. Only two frugivores, Euphonia musica and Vireo altiloquous, removed most of the seeds of plants for which they exhibited repeated preference across the landscape. Preference patterns, particularly those exhibiting consistency in space and time for plant species having prolonged fruiting periods, may have important mechanistic consequences for the persistence, succession, and regeneration of tropical plant communities.

A comparative study on the enhanced operation of a BFB and SFCW coupling process for domestic wastewater treatment

NASA Astrophysics Data System (ADS)

Lingwei, Kong; Lu, Wang; Rongwu, Mei; Yingyu, Tan; Yu, Zhang; Yan, Gao; Jianing, Sun; Ya, Li

2018-05-01

In this study, a new coupling process system of BFB (biological filter bed) and SFCW (subsurface-flow constructed wetland) based on the auto-ventilation network was proposed, and the comparative pollutant removal efficiency of the pilot test coupling system with different substrates configurations were investigated. The study found that: the influent concentration of the system fluctuated greatly and effluent concentration of the comparison system (b) was 20.22 ± 13.37 mg/L, 2.70 ± 2.49 mg/L, 4.40 ± 3.05 mg/L and 1.09 ± 0.62 mg/L, respectively. The comparison system (b) had better removal rates than that of the original system (a), which was 81.30 %, 90.28 %, 88.57 % and 75.36 % for CODcr, NH4 +-N, TN and TP, respectively. The removal of the above main water indexes of the comparison system (b) promoted to 4.20 %, 9.20 %, 7.66 % and 13.61 % respectively when compared to the original system (a), which showed that the optimized configuration of various kinds of substrates was significant and was more beneficial to the degradation and removal of pollutants. The adsorption and interception function of substrates in the constructed wetland was the main way of phosphorus removal. The function of auto-ventilation ensured the amount of DO in the coupling system, making the phosphorus removal was less affected comparing to structure of traditional wetland.

Characterizing the impact of pressure on virus filtration processes and establishing design spaces to ensure effective parvovirus removal.

PubMed

Strauss, Daniel; Goldstein, Joshua; Hongo-Hirasaki, Tomoko; Yokoyama, Yoshiro; Hirotomi, Naokatsu; Miyabayashi, Tomoyuki; Vacante, Dominick

2017-09-01

Virus filtration provides robust removal of potential viral contaminants and is a critical step during the manufacture of biotherapeutic products. However, recent studies have shown that small virus removal can be impacted by low operating pressure and depressurization. To better understand the impact of these conditions and to define robust virus filtration design spaces, we conducted multivariate analyses to evaluate parvovirus removal over wide ranges of operating pressure, solution pH, and conductivity for three mAb products on Planova™ BioEX and 20N filters. Pressure ranges from 0.69 to 3.43 bar (10.0-49.7 psi) for Planova BioEX filters and from 0.50 to 1.10 bar (7.3 to 16.0 psi) for Planova 20N filters were identified as ranges over which effective removal of parvovirus is achieved for different products over wide ranges of pH and conductivity. Viral clearance at operating pressure below the robust pressure range suggests that effective parvovirus removal can be achieved at low pressure but that Minute virus of mice (MVM) logarithmic reduction value (LRV) results may be impacted by product and solution conditions. These results establish robust design spaces for Planova BioEX and 20N filters where high parvovirus clearance can be expected for most antibody products and provide further understanding of viral clearance mechanisms. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1294-1302, 2017. © 2017 American Institute of Chemical Engineers.

Strategy of Construction and Demolition Waste Management after Chemical Industry Facilities Removal

NASA Astrophysics Data System (ADS)

Tashkinova, I. N.; Batrakova, G. M.; Vaisman, Ya I.

2017-06-01

Mixed waste products are generated in the process of irrelevant industrial projects’ removal if conventional techniques of their demolition and dismantling are applied. In Russia the number of unused chemical industry facilities including structures with high rate of wear is growing. In removing industrial buildings and production shops it is used conventional techniques of demolition and dismantling in the process of which mixed waste products are generated. The presence of hazardous chemicals in these wastes makes difficulties for their use and leads to the increasing volume of unutilized residues. In the process of chemical industry facilities’ removal this fact takes on special significance as a high level of hazardous chemicals in the waste composition demands for the realization of unprofitable measures aimed at ensuring environmental and industrial safety. The proposed strategy of managing waste originated from the demolition and dismantling of chemical industry facilities is based on the methodology of industrial metabolism which allows identifying separate material flows of recycled, harmful and ballast components, performing separate collection of components during removal and taking necessary preventive measures. This strategy has been tested on the aniline synthesis plant being in the process of removal. As a result, a flow of 10 wt. %, subjected to decontamination, was isolated from the total volume of construction and demolition waste (C&D waste). The considered approach allowed using the resource potential of more than 80wt. % of waste and minimizing the disposed waste volume.

The effect of oxidant addition on ferrous iron removal from multi-element acidic sulphate solutions

NASA Astrophysics Data System (ADS)

Mbedzi, Ndishavhelafhi; Ibana, Don; Dyer, Laurence; Browner, Richard

2017-01-01

This study was an investigation on the hydrolytic precipitation of iron from simulated pregnant leach solution (PLS) of nickel laterite atmospheric leaching. The effect of equilibrium pH, temperature and the addition of oxidant on total iron (ferrous (Fe (II)) and ferric (Fe (III)), aluminium and chromium removal was investigated together with the associated nickel and cobalt losses to the precipitate. Systematic variations of the experimental variables revealed ≥99% of the ferric iron can be removed from solution at conditions similar to those used in standard partial neutralisation in zinc and nickel production, pH of 2.5 and temperature less than 100 °C with minimal losses (<0.5%) of both nickel and cobalt. Temperature variation from 55 to 90 °C had no significant effect on the magnitude of Fe (III) precipitation but led to a significant increase in aluminium removal from 67% to 95% and improved the filterability of the precipitates. There was no ferrous iron precipitation even at a pH of 3.75 in the absence of an oxidant with its removal (98%) achieved by oxidative precipitation with oxygen gas at pH 3.5. Unlike Fe (III) precipitation, the operating temperature significantly affects oxidative precipitation of Fe (II). Hence, in practical application, the hydrolytic precipitation and oxidation to remove iron must be operated at 85 °C to ensure both ferrous and ferric iron are precipitated.

Sorption and degradation of petroleum hydrocarbons, polycyclic aromatic hydrocarbons, alkylphenols, bisphenol A and phthalates in landfill leachate using sand, activated carbon and peat filters.

PubMed

Kalmykova, Yuliya; Moona, Nashita; Strömvall, Ann-Margret; Björklund, Karin

2014-06-01

Landfill leachates are repeatedly found contaminated with organic pollutants, such as alkylphenols (APs), phthalates and polycyclic aromatic hydrocarbons (PAHs) at levels exceeding water quality standards. It has been shown that these pollutants may be present in the colloidal and truly dissolved phase in contaminated water, making particle separation an inefficient removal method. The aim of this study was to investigate sorption and degradation of petroleum hydrocarbons (PHCs), selected APs, bisphenol A (BPA), phthalates and PAHs from landfill leachate using sand, granulated activated carbon (GAC) and peat moss filters. A pilot plant was installed at an inactive landfill with mixed industrial and household waste and samples were collected before and after each filter during two years. Leachate pre-treated in oil separator and sedimentation pond failed to meet water quality standards in most samples and little improvement was seen after the sand filter. These techniques are based on particle removal, whereas the analysed pollutants are found, to varying degrees, bound to colloids or dissolved. However, even highly hydrophobic compounds expected to be particle-bound, such as the PHCs and high-molecular weight PAHs, were poorly removed in the sand filter. The APs and BPA were completely removed by the GAC filter, while mass balance calculations indicate that 50-80% of the investigated phenols were removed in the peat filter. Results suggest possible AP degradation in peat filters. No evidence of phthalate degradation in the landfill, pond or the filters was found. The PHCs were completely removed in 50% and 35% of the measured occasions in the GAC and peat filters, respectively. The opposite trend was seen for removal of PAHs in GAC (50%) and peat (63%). Oxygenated PAHs with high toxicity were found in the leachates but not in the pond sediment. These compounds are likely formed in the pond water, which is alarming because sedimentation ponds are commonly used treatment techniques. The oxy-PAHs were effectively removed in the GAC, and especially the peat filter. It was hypothesized that dissolved compounds would adsorb equally well to the peat and GAC filters. This was not completely supported as the GAC filter was in general more efficient than peat. Copyright © 2014 Elsevier Ltd. All rights reserved.

Attitudes toward Women's Body Hair: Relationship with Disgust Sensitivity

ERIC Educational Resources Information Center

Tiggemann, Marika; Lewis, Christine

2004-01-01

We aimed to further investigate the "hairlessness" norm that is the common practice of body hair removal among women. A sample of 198 undergraduate students (91 men, 107 women) completed questionnaires asking about attitudes toward women's body hair and the reasons women remove this hair, as well as a measure of disgust sensitivity. It was found…

78 FR 50443 - Notice of Inventory Completion: Thomas Burke Memorial Washington State Museum, University of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-19

... . SUPPLEMENTARY INFORMATION: Notice is here given in accordance with the Native American Graves Protection and... removed from the Dunlap/Sedro Wooley High School Site (45-SK-35) on the Skagit River delta in Skagit County, WA. The human remains were removed during a University of Washington Field School Expedition led...

Microprocessor-Controlled Laser Balancing System

NASA Technical Reports Server (NTRS)

Demuth, R. S.

1985-01-01

Material removed by laser action as part tested for balance. Directed by microprocessor, laser fires appropriate amount of pulses in correct locations to remove necessary amount of material. Operator and microprocessor software interact through video screen and keypad; no programing skills or unprompted system-control decisions required. System provides complete and accurate balancing in single load-and-spinup cycle.