Novel drift structures for silicon and compound semiconductor X-ray and gamma-ray detectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patt, B.E.; Iwanczyk, J.S.

Recently developed silicon- and compound-semiconductor-based drift detector structures have produced excellent performance for charged particles, X-rays, and gamma rays and for low-signal visible light detection. The silicon drift detector (SDD) structures that the authors discuss relate to direct X-ray detectors and scintillation photon detectors coupled with scintillators for gamma rays. Recent designs include several novel features that ensure very low dark current and hence low noise. In addition, application of thin window technology ensures a very high quantum efficiency entrance window on the drift photodetector. The main features of the silicon drift structures for X rays and light detection aremore » very small anode capacitance independent of the overall detector size, low noise, and high throughput. To take advantage of the small detector capacitance, the first stage of the electronics needs to be integrated into the detector anode. In the gamma-ray application, factors other than electronic noise dominate, and there is no need to integrate the electronics into the anode. Thus, a different drift structure is needed in conjunction with a high-Z material. The main features in this case are large active detector volume and electron-only induced signal.« less

Quality assurance planning for lunar Mars exploration

NASA Technical Reports Server (NTRS)

Myers, Kay

1991-01-01

A review is presented of the tools and techniques required to meet the challenge of total quality in the goal of traveling to Mars and returning to the moon. One program used by NASA to ensure the integrity of baselined requirements documents is configuration management (CM). CM is defined as an integrated management process that documents and identifies the functional and physical characteristics of a facility's systems, structures, computer software, and components. It also ensures that changes to these characteristics are properly assessed, developed, approved, implemented, verified, recorded, and incorporated into the facility's documentation. Three principal areas are discussed that will realize significant efficiencies and enhanced effectiveness, change assessment, change avoidance, and requirements management.

Formation of integrated structural units using the systematic and integrated method when implementing high-rise construction projects

NASA Astrophysics Data System (ADS)

Abramov, Ivan

2018-03-01

Development of design documentation for a future construction project gives rise to a number of issues with the main one being selection of manpower for structural units of the project's overall implementation system. Well planned and competently staffed integrated structural construction units will help achieve a high level of reliability and labor productivity and avoid negative (extraordinary) situations during the construction period eventually ensuring improved project performance. Research priorities include the development of theoretical recommendations for enhancing reliability of a structural unit staffed as an integrated construction crew. The author focuses on identification of destabilizing factors affecting formation of an integrated construction crew; assessment of these destabilizing factors; based on the developed mathematical model, highlighting the impact of these factors on the integration criterion with subsequent identification of an efficiency and reliability criterion for the structural unit in general. The purpose of this article is to develop theoretical recommendations and scientific and methodological provisions of an organizational and technological nature in order to identify a reliability criterion for a structural unit based on manpower integration and productivity criteria. With this purpose in mind, complex scientific tasks have been defined requiring special research, development of corresponding provisions and recommendations based on the system analysis findings presented herein.

Cas4-Dependent Prespacer Processing Ensures High-Fidelity Programming of CRISPR Arrays.

PubMed

Lee, Hayun; Zhou, Yi; Taylor, David W; Sashital, Dipali G

2018-04-05

CRISPR-Cas immune systems integrate short segments of foreign DNA as spacers into the host CRISPR locus to provide molecular memory of infection. Cas4 proteins are widespread in CRISPR-Cas systems and are thought to participate in spacer acquisition, although their exact function remains unknown. Here we show that Bacillus halodurans type I-C Cas4 is required for efficient prespacer processing prior to Cas1-Cas2-mediated integration. Cas4 interacts tightly with the Cas1 integrase, forming a heterohexameric complex containing two Cas1 dimers and two Cas4 subunits. In the presence of Cas1 and Cas2, Cas4 processes double-stranded substrates with long 3' overhangs through site-specific endonucleolytic cleavage. Cas4 recognizes PAM sequences within the prespacer and prevents integration of unprocessed prespacers, ensuring that only functional spacers will be integrated into the CRISPR array. Our results reveal the critical role of Cas4 in maintaining fidelity during CRISPR adaptation, providing a structural and mechanistic model for prespacer processing and integration. Copyright © 2018 Elsevier Inc. All rights reserved.

Probing Aircraft Flight Test Hazard Mitigation for the Alternative Fuel Effects on Contrails and Cruise Emissions (ACCESS) Research Team . Volume 2; Appendices

NASA Technical Reports Server (NTRS)

Kelly, Michael J.

2013-01-01

The Alternative Fuel Effects on Contrails and Cruise Emissions (ACCESS) Project Integration Manager requested in July 2012 that the NASA Engineering and Safety Center (NESC) form a team to independently assess aircraft structural failure hazards associated with the ACCESS experiment and to identify potential flight test hazard mitigations to ensure flight safety. The ACCESS Project Integration Manager subsequently requested that the assessment scope be focused predominantly on structural failure risks to the aircraft empennage (horizontal and vertical tail). This report contains the Appendices to Volume I.

Innovative approaches to promoting cervical health and raising cervical cancer awareness by use of existing cultural structures in resource-limited countries: experiences with traditional marriage counseling in Zambia.

PubMed

Kapambwe, Sharon; Parham, Groesbeck; Mwanahamuntu, Mulindi; Chirwa, Susan; Mwanza, Jacob; Amuyunzu-Nyamongo, Mary

2013-12-01

The Cervical Cancer Prevention Program in Zambia (CCPPZ) has increasingly used community-level structures to increase the uptake and ensure the sustainability of the program. Traditional marriage counselors, the alangizi, who have existed in the Zambian society for many years, are one of the structures used by the program to impart cervical cancer knowledge and increase access to screening and care using an existing community structure. Several steps were followed in developing this intervention: (a) ensuring the alangizi understood the process of screening by encouraging them to go through the screening process; (b) workshops were arranged for the alangizi to meet and share experiences during which lessons were given on cervical cancer by health workers as well; and (c) eight alangizi were chosen to help document the lessons as part of ensuring that cervical cancer information is accurate and passed in a consistent manner. Over 70 alangizi, who had undergone cervical cancer screening, were trained by CCPPZ. A 'Cervical Cancer Training Manual for Marriage Counsellors' was developed to help the alangizi integrate cervical cancer lessons in their routine teachings. An evaluation was conducted during the training of the alangizi that forms the basis for this paper. The results show that although the alangizi face key challenges in their work (e.g. changing social contexts), they are still considered relevant by most communities in Zambia and are potentially an important avenue for cervical cancer and other health information. This paper shows that it is possible to integrate sexual and reproductive health messages into existing structures in the community. However, it is important to design culturally specific and sensitive healthcare strategies that embrace locally accepted good practices.

The business of palliative medicine--part 6: clinical operations in a comprehensive integrated program.

PubMed

Lagman, Ruth L; Walsh, Declan; LeGrand, Susan B; Davis, Mellar P

2011-03-01

The medical care of individuals with advanced disease is complex and has historically been fragmented and suboptimal. Palliative medicine attempts to address these needs. The Harry R. Horvitz Center for Palliative Medicine at the Cleveland Clinic is an established comprehensive integrated program. Structured and seamless clinical operations are important to ensure the best delivery of high-quality medical care and continuity for those affected by life-limiting illness.

Evaluation of Various Tack Coat Materials Using Interface Shear Device and Recommendations on a Simplified Device

DOT National Transportation Integrated Search

2017-12-01

The performance of pavement interface bonds affects the integrity of pavement structures. In current practice, tack coats are used to ensure sufficient bonding between asphalt concrete (AC) layers as well as AC and concrete or aggregate base layers. ...

75 FR 45173 - Notice of Issuance of Regulatory Guide

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-02

... coolant system for measuring process variables (e.g., pressure, level, and flow). The term ``safety- related'' refers to those structures, systems, and components necessary to ensure (1) the integrity of the... are located in the NRC's Agencywide Documents Access and Management System (ADAMS) under Accession No...

Science in a Team Environment (AKA, How to Play Nicely with Others)

NASA Technical Reports Server (NTRS)

Platts, S. H.; Primeaux, L.; Swarmer, T.; Yarbough, P. O

2017-01-01

So you want to do NASA funded research in a spaceflight analog? There are several things about participating in an HRP managed analog that may be different from the way you normally do work in your laboratory. The purpose of this presentation is to highlight those differences and explain some of the unique aspects of doing this research. Participation in an HRP funded analog study complement, even if initially selected for funding, is not automatic and involves numerous actions from ISSMP, HRP, and the PI. There are steps that have to be taken and processes to follow before approval and ISSMP-FA integration. After the proposal and acceptance process the Investigator works closely with the Flight Analog team to ensure full integration of their study requirements into a compliment. A complement is comprised of a group of studies requiring a common platform and/or scenario that are able to be integrated on a non-interference basis for implementation. Full integration into the analog platform can be broken down into three phases: integration, preparation, and implementation. These phases occur in order with some overlap in the integration and preparation phase. The ISSMP-FA team integrates, plans and implements analog study complements. Properly defining your research requirements and getting them documented is one of the most critical components to ensure successful integration and implementation of your study, but is also one of the most likely to be neglected by PIs. Requirements that are not documented, or that are documented poorly are unlikely to get done, no matter how much you push. The process to document requirements is two-fold, consisting of an initial individual requirements integration and then a compliment requirements integration. Understanding the requirements in detail and early ensures that the science is not compromised by outside influences. This step is vital to the integration, preparation, and implementation phases. The individual requirements integration is the first step in ensuring that the research fits into an available analog platform or allows for the Flight Analog team to provide information on structural study changes for participation in the analog. At this early point investigators need to understand exactly what their requirements are to produce relevant data and convey their must have needs to the Flight Analog team. The fluid nature of analog platforms allow for minor alterations to the operational structure. Participation in analog research requires flexibility from the investigator to ensure implementation of their research into a flight like analog platform. The compliment integration requires plasticity; investigators are asked to work closely with one another and the Flight Analog team to combine research studies into a single study plan. This study plan's ultimate goal is to facilitate multiple study participation with minimal scientific impact to each individual study. The Flight Analogs team works to find the best compromise for all parties while protecting the flight like atmosphere of a particular analog. Additional restrictions, limitations and constraints may be required by the analog in order to make all of the science work. Many studies need to be combined into each complement and there are a limited number of hours available for data collection. Through data/sample sharing, we can reduce the burden on the test subject, while usually avoiding significant science impacts. Restrictions on food, exercise, medications and sleep cycle are important to consider for your research.

Innovative Manufacturing of Launch Vehicle Structures - Integrally Stiffened Cylinder Process

NASA Technical Reports Server (NTRS)

Wagner, John; Domack, Marcia; Tayon, Wesley; Bird, Richard K.

2017-01-01

Reducing launch costs is essential to ensuring the success of NASA's visions for planetary exploration and earth science, economical support of the International Space Station, and competitiveness of the U.S. commercial launch industry. Reducing launch vehicle manufacturing cost supports NASA's budget and technology development priorities.

A new SMART sensing system for aerospace structures

NASA Astrophysics Data System (ADS)

Zhang, David C.; Yu, Pin; Beard, Shawn; Qing, Peter; Kumar, Amrita; Chang, Fu-Kuo

2007-04-01

It is essential to ensure the safety and reliability of in-service structures such as unmanned vehicles by detecting structural cracking, corrosion, delamination, material degradation and other types of damage in time. Utilization of an integrated sensor network system can enable automatic inspection of such damages ultimately. Using a built-in network of actuators and sensors, Acellent is providing tools for advanced structural diagnostics. Acellent's integrated structural health monitoring system consists of an actuator/sensor network, supporting signal generation and data acquisition hardware, and data processing, visualization and analysis software. This paper describes the various features of Acellent's latest SMART sensing system. The new system is USB-based and is ultra-portable using the state-of-the-art technology, while delivering many functions such as system self-diagnosis, sensor diagnosis, through-transmission mode and pulse-echo mode of operation and temperature measurement. Performance of the new system was evaluated for assessment of damage in composite structures.

Infrastructure design integration to optimize structures and minimize groundwater impacts. Case of a bottom slab and groundwater by-pass integration in La Sagrera railway station, Spain.

NASA Astrophysics Data System (ADS)

Serrano Juan, Alejandro; Vázquez-Suñè, Enric; Pujades, Estanislao; Velasco, Violeta; Criollo, Rotman; Jurado, Anna

2016-04-01

Underground constructions search the most efficient solutions to increase safety, reduce impacts in both underground construction (such as bottom slab water pressures) and groundwater (such as groundwater barrier effect), reduce future maintenance processes and ensure that everything is implemented by the minimum cost. Even being all the previous solutions directly related to groundwater, independent solutions are usually designed to independently deal with each problem. This paper shows how with a groundwater by-pass design that enables the groundwater flow through the structure it is possible to provide an homogeneous distribution of the water pressures under the bottom slab and reduce the barrier effect produced by the structure. The new integrated design has been applied to the largest infrastructure of Barcelona: La Sagrera railway station. Through a hydrogeological model has been possible to test the project and the integrated designs in three different scenarios. This new solution resolves the barrier effect produced by the structure and optimizes the bottom slab, reducing considerably the costs and increasing safety during the construction phase.

Clinical trials bureaucracy: unintended consequences of well-intentioned policy.

PubMed

Califf, Robert M

2006-01-01

As randomized controlled trials have become the 'gold standard' for medical research, a complex regulatory structure for the conduct of clinical trials has emerged. However, this structure has not been adequately assessed to ensure that regulations governing human subjects research actually produce the desired effects. Our purpose is to identify some of the major shortcomings in the current regulatory system of human clinical trials oversight, and to propose some potential solutions to these problems. We discuss the evolution of the current US regulatory environment and its application in the context of several widely-used drug therapies. Despite numerous randomized controlled trials, performed within a structure of extensive documentation and data collection, serious shortcomings in a number of pharmaceutical therapies were not detected until after the drugs were approved and widely adopted by clinicians. The current system of regulatory bureaucracy in clinical trials has led to an extremely expensive research paradigm that, in spite of complex systems of oversight and exhaustive data collection, cannot be shown to adequately ensure the integrity of the research process and the protection of human research subjects. Some parts of the system, including Research Ethics Review Boards, may not be well-suited to carrying out their core mission of overseeing research conduct, and other aspects of clinical trials regulatory structure, such as monitoring/auditing review and adverse event reporting, may constitute a waste of money and resources. Misdirected data collection and adverse events reporting divert valuable resources and hamper development of large, simple clinical trials powered to definitively answer important research questions. Careful scrutiny of the utility of current or proposed regulatory schemes is required to ensure the integrity of human subjects research and to enhance the effectiveness of research dollars.

Partnership disengagement from primary community care networks (PCCNs): A qualitative study for a national demonstration project

PubMed Central

2010-01-01

Background The Primary Community Care Network (PCCN) Demonstration Project, launched by the Bureau of National Health Insurance (BNHI) in 2003, is still in progress. Partnership structures in PCCNs represent both contractual clinic-to-clinic and clinic-to-hospital member relationships of organizational aspects. The partnership structures are the formal relationships between individuals and the total network. Their organizational design aims to ensure effective communication, coordination, and integration across the total network. Previous studies have focused largely on how contractual integration among the partnerships works and on its effects. Few studies, however, have tried to understand partnership disengagement in PCCNs. This study explores why some partnerships in PCCNs disengage. Methods This study used a qualitative methodology with semi-structured questions for in-depth interviews. The semi-structured questions were pre-designed to explore the factors driving partnership disengagement. Thirty-seven clinic members who had withdrawn from their PCCNs were identified from the 2003-2005 Taiwan Primary Community Care Network Lists. Results Organization/participant factors (extra working time spend and facility competency), network factors (partner collaboration), and community factors (health policy design incompatibility, patient-physician relationship, and effectiveness) are reasons for clinic physicians to withdraw or change their partnerships within the PCCNs. Conclusions To strengthen partnership relationships, several suggestions are made, including to establish clinic and hospital member relationships, and to reduce administrative work. In addition, both educating the public about the concept of family doctors and ensuring well-organized national health policies could help health care providers improve the integration processes. PMID:20359369

[Digital signal processing of a novel neuron discharge model stimulation strategy for cochlear implants].

PubMed

Yang, Yiwei; Xu, Yuejin; Miu, Jichang; Zhou, Linghong; Xiao, Zhongju

2012-10-01

To apply the classic leakage integrate-and-fire models, based on the mechanism of the generation of physiological auditory stimulation, in the information processing coding of cochlear implants to improve the auditory result. The results of algorithm simulation in digital signal processor (DSP) were imported into Matlab for a comparative analysis. Compared with CIS coding, the algorithm of membrane potential integrate-and-fire (MPIF) allowed more natural pulse discharge in a pseudo-random manner to better fit the physiological structures. The MPIF algorithm can effectively solve the problem of the dynamic structure of the delivered auditory information sequence issued in the auditory center and allowed integration of the stimulating pulses and time coding to ensure the coherence and relevance of the stimulating pulse time.

46 CFR 42.15-55 - Cargo ports and other similar openings.

Code of Federal Regulations, 2013 CFR

2013-10-01

... be fitted with doors so designed as to ensure watertightness and structural integrity commensurate... shall be subject to tightness tests at the initial survey and at such subsequent surveys or more... the design and proper working of the vessel. (b) Unless permitted by the Commandant the lower edge of...

46 CFR 42.15-55 - Cargo ports and other similar openings.

Code of Federal Regulations, 2012 CFR

2012-10-01

... be fitted with doors so designed as to ensure watertightness and structural integrity commensurate... shall be subject to tightness tests at the initial survey and at such subsequent surveys or more... the design and proper working of the vessel. (b) Unless permitted by the Commandant the lower edge of...

46 CFR 42.15-55 - Cargo ports and other similar openings.

Code of Federal Regulations, 2010 CFR

2010-10-01

... be fitted with doors so designed as to ensure watertightness and structural integrity commensurate... shall be subject to tightness tests at the initial survey and at such subsequent surveys or more... the design and proper working of the vessel. (b) Unless permitted by the Commandant the lower edge of...

46 CFR 42.15-55 - Cargo ports and other similar openings.

Code of Federal Regulations, 2014 CFR

2014-10-01

... be fitted with doors so designed as to ensure watertightness and structural integrity commensurate... shall be subject to tightness tests at the initial survey and at such subsequent surveys or more... the design and proper working of the vessel. (b) Unless permitted by the Commandant the lower edge of...

46 CFR 42.15-55 - Cargo ports and other similar openings.

Code of Federal Regulations, 2011 CFR

2011-10-01

... be fitted with doors so designed as to ensure watertightness and structural integrity commensurate... shall be subject to tightness tests at the initial survey and at such subsequent surveys or more... the design and proper working of the vessel. (b) Unless permitted by the Commandant the lower edge of...

Seed zones for maintaining adapted plant populations

Treesearch

J. Bradley St. Clair; G. Randy Johnson; Vicky J. Erickson; Richard C. Johnson; Nancy L. Shaw

2007-01-01

Seed zones delineate areas within which plant materials can be transferred with little risk that they will be poorly adapted to their new location. They ensure successful restoration and revegetation, and help maintain the integrity of natural genetic structure. The value of seed zones is recognized in numerous policy statements from federal and state agencies. Results...

Library Web Site Administration: A Strategic Planning Model For the Smaller Academic Library

ERIC Educational Resources Information Center

Ryan, Susan M.

2003-01-01

Strategic planning provides a useful structure for creating and implementing library web sites. The planned integration of a library's web site into its mission and objectives ensures that the library's community of users will consider the web site one of the most important information tools the library offers.

Strategies to integrate patient and family education into patient care redesign.

PubMed

Yingling, L; Trocino, L

1997-05-01

This article discusses five strategies to effectively integrate patient and family education into patient care redesign. The strategies include building the plan, building a shared mission and vision, building involvement, building collaboration through initiatives, and building accountability. Each strategy or "building block" is vital to the resulting structure of patient and family education. Effective results of the strategies are discussed as milestones. The process must be ongoing to ensure continuous improvement in quality patient care outcomes, consumer satisfaction and cost-effectiveness.

Structural Integrity Of Low-Velocity Impacted C/SIC Ceramic Matrix Composites

NASA Astrophysics Data System (ADS)

Knoche, R.; Drose, A.

2012-07-01

Carbon fibre reinforced silicon carbide (C/SiC) ceramic matrix composites (CMC) are most favourable for thermal protection systems & hot structures in re-entry vehicles since they offer superior heat resistance, high specific strength as well as a low coefficient of temperature expansion (CTE). To ensure the structural integrity of these C/SiC structures and thus mission safety all potential degradation effects during manufacturing and lifetime have to be considered. One of the most probable defects which may harm the structural integrity significantly can be caused by low-velocity impacts (LVI) which may occur during transportation and integration by e.g. dropping of tools. Thus the present study focuses on the residual mechanical and thermo-mechanical performance of C/SiC composites after being exposed to a low-velocity impact in terms of initial and residual mechanical performance, changes in microstructure, as well as thermo-mechanical performance through exposing specimens to multiple experimentally simulated re-entries. The results reveal the impact characteristics and damage mechanisms of C/SiC CMC exposed to a low-velocity impact and evidence the functional reliability as well as the damage tolerance of the C/SiC material investigated.

Integrated fiber optic structural health sensors for inflatable space habitats

NASA Astrophysics Data System (ADS)

Ohanian, Osgar John; Garg, Naman; Castellucci, Matthew A.

2017-04-01

Inflatable space habitats offer many advantages for future space missions; however, the long term integrity of these flexible structures is a major concern in harsh space environments. Structural Health Monitoring (SHM) of these structures is essential to ensure safe operation, provide early warnings of damage, and measure structural changes over long periods of time. To address this problem, the authors have integrated distributed fiber optic strain sensors to measure loading and to identify the occurrence and location of damage in the straps and webbing used in the structural restraint layer. The fiber optic sensors employed use Rayleigh backscatter combined with optical frequency domain reflectometry to enable measurement of strain every 0.65 mm (0.026 inches) along the sensor. The Kevlar woven straps that were tested exhibited large permanent deformation during initial cycling and continued to exhibit hysteresis thereafter, but there was a consistent linear relationship between the sensor's measurement and the actual strain applied. Damage was intentionally applied to a tensioned strap, and the distributed strain measurement clearly identified a change in the strain profile centered on the location of the damage. This change in structural health was identified at a loading that was less than half of the ultimate loading that caused a structural failure. This sensing technique will be used to enable integrated SHM sensors to detect loading and damage in future inflatable space habitat structures.

Space Structure Development

NASA Technical Reports Server (NTRS)

Smith, Thomas

2015-01-01

The duration of my Summer 2015 Internship Tour at NASA's Johnson Space Center was spent working in the Structural Engineering Division's Structures Branch. One of the two main roles of the Structures Branch, ES2, is to ensure the structural integrity of spacecraft vehicles and the structural subsystems needed to support those vehicles. The other main objective of this branch is to develop the lightweight structures that are necessary to take humans beyond Low-Earth Orbit. Within ES2, my four projects involved inflatable space structure air bladder material testing; thermal and impact material testing for spacecraft windows; structural analysis on a joint used in the Boeing CST-100 airbag system; and an additive manufacturing design project.

Multi-field coupled sensing network for health monitoring of composite bolted joint

NASA Astrophysics Data System (ADS)

Wang, Yishou; Qing, Xinlin; Dong, Liang; Banerjee, Sourav

2016-04-01

Advanced fiber reinforced composite materials are becoming the main structural materials of next generation of aircraft because of their high strength and stiffness to weight ratios, and excellent designability. As key components of large composite structures, joints play important roles to ensure the integrity of the composite structures. However, it is very difficult to analyze the strength and failure modes of composite joints due to their complex nonlinear coupling factors. Therefore, there is a need to monitor, diagnose, evaluate and predict the structure state of composite joints. This paper proposes a multi-field coupled sensing network for health monitoring of composite bolted joints. Major work of this paper includes: 1) The concept of multifunctional sensor layer integrated with eddy current sensors, Rogowski coil and arrayed piezoelectric sensors; 2) Development of the process for integrating the eddy current sensor foil, Rogowski coil and piezoelectric sensor array in multifunctional sensor layer; 3) A new concept of smart composite joint with multifunctional sensing capability. The challenges for building such a structural state sensing system and some solutions to address the challenges are also discussed in the study.

Achieving development goals for HIV, tuberculosis and malaria in sub-Saharan Africa through integrated antenatal care: barriers and challenges.

PubMed

Fowkes, Freya J I; Draper, Bridget L; Hellard, Margaret; Stoové, Mark

2016-12-12

The global health community is currently transitioning from the Millennium Development Goals (MDGs) to the Sustainable Development Goals (SDGs). Unfortunately, progress towards maternal, newborn and infant health MDGs has lagged significantly behind other key health goals, demanding a renewed global effort in this key health area. The World Health Organization and other institutions heralded integrated antenatal care (ANC) as the best way to address the inter-related health issues of HIV, tuberculosis (TB) and malaria in the high risk groups of pregnant women and infants; integrated ANC services also offer a mechanism to address slow progress towards improved maternal health. There is remarkably limited evidence on best practice approaches of program implementation, acceptability and effectiveness for integrated ANC models targeting multiple diseases. Here, we discuss current integrated ANC global guidelines and the limited literature describing integrated ANC implementation and evidence for their role in addressing HIV, malaria and TB during pregnancy in sub-Saharan Africa. We highlight the paucity of data on the effectiveness of integrated ANC models and identify significant structural barriers in the health system (funding, infrastructure, distribution, human resources), the adoption system (limited buy-in from implementers, leadership, governance) and, in the broader context, patient-centred barriers (fear, stigma, personal burdens) and barriers in funding structures. We highlight recommendations for action and discuss avenues for the global health community to develop systems to integrate multiple disease programs into ANC models of care that better address these three priority infectious diseases. With the current transition to the SDGs and concerns regarding the failure to meet maternal health MDGs, the global health community, researchers, implementers and funding bodies must work together to ensure the establishment of quality operational and implementation research to inform integrated ANC models. It is imperative that the global health community engages in a timely discussion about such implementation innovations and instigates appropriate actions to ensure advances in maternal health are sufficient to meet applicable SDGs.

Helping safeguard Veterans Affairs' hospital buildings by advanced earthquake monitoring

USGS Publications Warehouse

Kalkan, Erol; Banga, Krishna; Ulusoy, Hasan S.; Fletcher, Jon Peter B.; Leith, William S.; Blair, James L.

2012-01-01

In collaboration with the U.S. Department of Veterans Affairs (VA), the National Strong Motion Project of the U.S. Geological Survey has recently installed sophisticated seismic systems that will monitor the structural integrity of hospital buildings during earthquake shaking. The new systems have been installed at more than 20 VA medical campuses across the country. These monitoring systems, which combine sensitive accelerometers and real-time computer calculations, are capable of determining the structural health of each structure rapidly after an event, helping to ensure the safety of patients and staff.

Student Service and SEM: Training as the Tool to Sharpen Your Competitive Edge

ERIC Educational Resources Information Center

Leigh, Susan

2014-01-01

The Challenge: After years of investments on structures and systems that improve and integrate student transactional experiences, we discover that we have neglected to train our staff in customer service competencies that match student expectations. The Answer: Invest in your student service staff to ensure they possess the professional skills to…

The Domestic Telecommunications Carrier Industry. Part I. President's Task Force on Communications Policy. Staff Paper Five.

ERIC Educational Resources Information Center

Rostow, Eugene V.

A staff paper submitted to the President's Task Force on Communications Policy recommends that public policy ensure an integrated structure in the telecommunications industry, while fostering limited competition to keep the system responsive to new technology and to consumer demands. The present system of regulated monopoly for companies supplying…

An interactive integrative approach to translating knowledge and building a "learning organization" in health services management.

PubMed Central

Chunharas, Somsak

2006-01-01

This paper proposes a basic approach to ensuring that knowledge from research studies is translated for use in health services management with a view towards building a "learning organization". (A learning organization is one in which the environment is structured in such a way as to facilitate learning as well as the sharing of knowledge among members or employees.) This paper highlights various dimensions that determine the complexity of knowledge translation, using the problem-solving cycle as the backbone for gaining a better understanding of how different types of knowledge interact in health services management. It is essential to use an integrated and interactive approach to ensure that knowledge from research is translated in a way that allows a learning organization to be built and that knowledge is not used merely to influence a single decision in isolation from the overall services and management of an organization. PMID:16917653

Information Integration and Communication in Plant Growth Regulation.

PubMed

Chaiwanon, Juthamas; Wang, Wenfei; Zhu, Jia-Ying; Oh, Eunkyoo; Wang, Zhi-Yong

2016-03-10

Plants are equipped with the capacity to respond to a large number of diverse signals, both internal ones and those emanating from the environment, that are critical to their survival and adaption as sessile organisms. These signals need to be integrated through highly structured intracellular networks to ensure coherent cellular responses, and in addition, spatiotemporal actions of hormones and peptides both orchestrate local cell differentiation and coordinate growth and physiology over long distances. Further, signal interactions and signaling outputs vary significantly with developmental context. This review discusses our current understanding of the integrated intracellular and intercellular signaling networks that control plant growth. Copyright © 2016 Elsevier Inc. All rights reserved.

Information Integration and Communication in Plant Growth Regulation

PubMed Central

Chaiwanon, Juthamas; Wang, Wenfei; Zhu, Jia-Ying; Oh, Eunkyoo; Wang, Zhi-Yong

2016-01-01

Plants are equipped with the capacity to respond to a large number of diverse signals, both internal ones and those emanating from the environment, that are critical to their survival and adaption as sessile organisms. These signals need to be integrated through highly structured intracellular networks to ensure coherent cellular responses, and in addition, spatiotemporal actions of hormones and peptides both orchestrate local cell differentiation and coordinate growth and physiology over long distances. Further, signal interactions and signaling outputs vary significantly with developmental context. This review discusses our current understanding of the integrated intracellular and intercellular signaling networks that control plant growth. PMID:26967291

Ana3 is a conserved protein required for the structural integrity of centrioles and basal bodies.

PubMed

Stevens, Naomi R; Dobbelaere, Jeroen; Wainman, Alan; Gergely, Fanni; Raff, Jordan W

2009-11-02

Recent studies have identified a conserved "core" of proteins that are required for centriole duplication. A small number of additional proteins have recently been identified as potential duplication factors, but it is unclear whether any of these proteins are components of the core duplication machinery. In this study, we investigate the function of one of these proteins, Drosophila melanogaster Ana3. We show that Ana3 is present in centrioles and basal bodies, but its behavior is distinct from that of the core duplication proteins. Most importantly, we find that Ana3 is required for the structural integrity of both centrioles and basal bodies and for centriole cohesion, but it is not essential for centriole duplication. We show that Ana3 has a mammalian homologue, Rotatin, that also localizes to centrioles and basal bodies and appears to be essential for cilia function. Thus, Ana3 defines a conserved family of centriolar proteins and plays an important part in ensuring the structural integrity of centrioles and basal bodies.

Robust Structural Analysis and Design of Distributed Control Systems to Prevent Zero Dynamics Attacks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weerakkody, Sean; Liu, Xiaofei; Sinopoli, Bruno

We consider the design and analysis of robust distributed control systems (DCSs) to ensure the detection of integrity attacks. DCSs are often managed by independent agents and are implemented using a diverse set of sensors and controllers. However, the heterogeneous nature of DCSs along with their scale leave such systems vulnerable to adversarial behavior. To mitigate this reality, we provide tools that allow operators to prevent zero dynamics attacks when as many as p agents and sensors are corrupted. Such a design ensures attack detectability in deterministic systems while removing the threat of a class of stealthy attacks in stochasticmore » systems. To achieve this goal, we use graph theory to obtain necessary and sufficient conditions for the presence of zero dynamics attacks in terms of the structural interactions between agents and sensors. We then formulate and solve optimization problems which minimize communication networks while also ensuring a resource limited adversary cannot perform a zero dynamics attacks. Polynomial time algorithms for design and analysis are provided.« less

Comparative testing of radiographic testing, ultrasonic testing and phased array advanced ultrasonic testing non destructive testing techniques in accordance with the AWS D1.5 bridge welding code : [summary].

DOT National Transportation Integrated Search

2014-02-01

To ensure that Florida bridges remain safe and structurally secure for their 50-year-plus service life, they are inspected regularly. For steel bridges, welds critical to the bridges integrity do not even leave the workshop unless they meet rigoro...

Tissue reaction to a titanium-nickelide mesh implant after plasty of postresection defects of anatomic structures of the chest.

PubMed

Topolnitskiy, E B; Dambaev, G Ts; Hodorenko, V N; Fomina, T I; Shefer, N A; Gunther, V E

2012-07-01

We studied morphological features of the regenerate formed after postresection defect plasty of the pericardium, diaphragm, and thorax with a mesh implant made of nanostructural titanium-nickelide threads. The newly formed tissue grew through the implant with the formation of an integrated tissue regenerate ensuring anatomic and physiological restoration of this area.

28 CFR Appendix E to Part 61 - United States Marshals Service Procedures Relating to the Implementation of the National...

Code of Federal Regulations, 2012 CFR

2012-07-01

... minimizing the use of natural resources, and by improving planning and decision-making processes to avoid...) Integrating the NEPA process in the early stages of planning to ensure that decisions reflect environmental... site. The exclusion applies only if: (i) The structure and proposed use comply with local planning and...

28 CFR Appendix E to Part 61 - United States Marshals Service Procedures Relating to the Implementation of the National...

Code of Federal Regulations, 2013 CFR

2013-07-01

... minimizing the use of natural resources, and by improving planning and decision-making processes to avoid...) Integrating the NEPA process in the early stages of planning to ensure that decisions reflect environmental... site. The exclusion applies only if: (i) The structure and proposed use comply with local planning and...

28 CFR Appendix E to Part 61 - United States Marshals Service Procedures Relating to the Implementation of the National...

Code of Federal Regulations, 2014 CFR

2014-07-01

... minimizing the use of natural resources, and by improving planning and decision-making processes to avoid...) Integrating the NEPA process in the early stages of planning to ensure that decisions reflect environmental... site. The exclusion applies only if: (i) The structure and proposed use comply with local planning and...

28 CFR Appendix E to Part 61 - United States Marshals Service Procedures Relating to the Implementation of the National...

Code of Federal Regulations, 2011 CFR

2011-07-01

... minimizing the use of natural resources, and by improving planning and decision-making processes to avoid...) Integrating the NEPA process in the early stages of planning to ensure that decisions reflect environmental... site. The exclusion applies only if: (i) The structure and proposed use comply with local planning and...

Modulation of chromatin structure by the FACT histone chaperone complex regulates HIV-1 integration.

PubMed

Matysiak, Julien; Lesbats, Paul; Mauro, Eric; Lapaillerie, Delphine; Dupuy, Jean-William; Lopez, Angelica P; Benleulmi, Mohamed Salah; Calmels, Christina; Andreola, Marie-Line; Ruff, Marc; Llano, Manuel; Delelis, Olivier; Lavigne, Marc; Parissi, Vincent

2017-07-28

Insertion of retroviral genome DNA occurs in the chromatin of the host cell. This step is modulated by chromatin structure as nucleosomes compaction was shown to prevent HIV-1 integration and chromatin remodeling has been reported to affect integration efficiency. LEDGF/p75-mediated targeting of the integration complex toward RNA polymerase II (polII) transcribed regions ensures optimal access to dynamic regions that are suitable for integration. Consequently, we have investigated the involvement of polII-associated factors in the regulation of HIV-1 integration. Using a pull down approach coupled with mass spectrometry, we have selected the FACT (FAcilitates Chromatin Transcription) complex as a new potential cofactor of HIV-1 integration. FACT is a histone chaperone complex associated with the polII transcription machinery and recently shown to bind LEDGF/p75. We report here that a tripartite complex can be formed between HIV-1 integrase, LEDGF/p75 and FACT in vitro and in cells. Biochemical analyzes show that FACT-dependent nucleosome disassembly promotes HIV-1 integration into chromatinized templates, and generates highly favored nucleosomal structures in vitro. This effect was found to be amplified by LEDGF/p75. Promotion of this FACT-mediated chromatin remodeling in cells both increases chromatin accessibility and stimulates HIV-1 infectivity and integration. Altogether, our data indicate that FACT regulates HIV-1 integration by inducing local nucleosomes dissociation that modulates the functional association between the incoming intasome and the targeted nucleosome.

Thermal integration of Spacelab experiments

NASA Technical Reports Server (NTRS)

Patterson, W. C.; Hopson, G. D.

1978-01-01

The method of thermally integrating the experiments for Spacelab is discussed. The scientific payload consists of a combination of European and United States sponsored experiments located in the module as well as on a single Spacelab pallet. The thermal integration must result in accomodating the individual experiment requirements as well as ensuring that the total payload is within the Spacelab Environmental Control System (ECS) resource capability. An integrated thermal/ECS analysis of the module and pallet is performed in concert with the mission timeline to ensure that the agreed upon experiment requirements are accommodated and to ensure the total payload is within the Spacelab ECS resources.

Finite element modal analysis of a vehicle-borne lidar cabin

NASA Astrophysics Data System (ADS)

Chen, Yafeng; Liu, Qiuwu; Wang, Jie; Hu, Shunxing; Huang, Jian

2018-02-01

Using SolidWorks software, the finite element modal analysis of a vehicle-borne pollution monitoring lidar cabin is carried out. The lidar cabin for the integrated lidar can ensure that the lidar system has good maneuverability and can effectively monitor the emission of air pollution. Since lidar is an integrated system of optics, mechanism, electricity and calculation, the performance of the cabin is directly related to the safety of the equipment and the lidar to work properly. Firstly, the cubic structure is modeled to simulate the cubic structure. Then, the model of the cabin model is analyzed by using the simulation plug-in, and the first 10 modes and natural frequencies are analyzed and recorded. The calculation results show that the cabin is dominated by bending vibration, and the amplitude area is concentrated in the opening of some windows and doors on each board. Therefore, we should increase the number of reinforcement bars or the strength of the skeleton in the vicinity of the door and window. At the same time, to avoid the resonance and ensure the precision of the optical elements and the electrical components and avoid structural damage of the cabin, the incentive frequency should be keep away from the natural frequency of the cabin. The vehicle-borne lidar system has been put into operation, and the analysis results have direct meaning to the transport of the cabin and the normal work.

AN INTEGRATED PERSPECTIVE ON THE ASSESSMENT OF TECHNOLOGIES: INTEGRATE-HTA.

PubMed

Wahlster, Philip; Brereton, Louise; Burns, Jacob; Hofmann, Björn; Mozygemba, Kati; Oortwijn, Wija; Pfadenhauer, Lisa; Polus, Stephanie; Rehfuess, Eva; Schilling, Imke; van der Wilt, Gert Jan; Gerhardus, Ansgar

2017-01-01

Current health technology assessment (HTA) is not well equipped to assess complex technologies as insufficient attention is being paid to the diversity in patient characteristics and preferences, context, and implementation. Strategies to integrate these and several other aspects, such as ethical considerations, in a comprehensive assessment are missing. The aim of the European research project INTEGRATE-HTA was to develop a model for an integrated HTA of complex technologies. A multi-method, four-stage approach guided the development of the INTEGRATE-HTA Model: (i) definition of the different dimensions of information to be integrated, (ii) literature review of existing methods for integration, (iii) adjustment of concepts and methods for assessing distinct aspects of complex technologies in the frame of an integrated process, and (iv) application of the model in a case study and subsequent revisions. The INTEGRATE-HTA Model consists of five steps, each involving stakeholders: (i) definition of the technology and the objective of the HTA; (ii) development of a logic model to provide a structured overview of the technology and the system in which it is embedded; (iii) evidence assessment on effectiveness, economic, ethical, legal, and socio-cultural aspects, taking variability of participants, context, implementation issues, and their interactions into account; (iv) populating the logic model with the data generated in step 3; (v) structured process of decision-making. The INTEGRATE-HTA Model provides a structured process for integrated HTAs of complex technologies. Stakeholder involvement in all steps is essential as a means of ensuring relevance and meaningful interpretation of the evidence.

Marine Vessel Traffic System

DTIC Science & Technology

2001-06-19

Queue Get Put The MutexQ module provides primitive queue operations which synchronize access to the queues and ensure queue structure integrity...interface provides for synchronous data rates ranging from 64 Kbps to 1.536 Mbps, while an RS-232 interface accommodates asynchronous data up to...interface VME Communications processor 57 and 8-channel serial I/O board. This board set provides a 68040 processor and 8-channels of synchronous

Pressure system recertification at NASA-Langley Research Center

NASA Technical Reports Server (NTRS)

Hudson, C. M.; Ramsey, J. W., Jr.

1983-01-01

Langley Research Center pressure systems are being recertified to ensure safe operation of these systems. The procedures for recertifying these pressure systems are reviewed. Generally, the analysis and inspection requirements outlined in the appropriate national consensus codes are followed. In some instances where the requirements of these codes are not met. The systems are analyzed further, repaired, modified and/or tested to demonstrate their structural integrity.

Analysis of stress concentration at holes in components made of 2195 aluminum-lithium

NASA Astrophysics Data System (ADS)

Ahmed, R.

1995-05-01

Because the 2195 aluminum-lithium of the super lightweight external tank (SLWT ET) has a lower toughness than the 2219 aluminum used in previous ET's, careful attention must be paid to stress concentration in the SLWT ET. This report details the initial analysis performed by NASA to determine the material properties required to ensure structural integrity in these critical areas.

The Quality and Validation of Structures from Structural Genomics

PubMed Central

Domagalski, Marcin J.; Zheng, Heping; Zimmerman, Matthew D.; Dauter, Zbigniew; Wlodawer, Alexander; Minor, Wladek

2014-01-01

Quality control of three-dimensional structures of macromolecules is a critical step to ensure the integrity of structural biology data, especially those produced by structural genomics centers. Whereas the Protein Data Bank (PDB) has proven to be a remarkable success overall, the inconsistent quality of structures reveals a lack of universal standards for structure/deposit validation. Here, we review the state-of-the-art methods used in macromolecular structure validation, focusing on validation of structures determined by X-ray crystallography. We describe some general protocols used in the rebuilding and re-refinement of problematic structural models. We also briefly discuss some frontier areas of structure validation, including refinement of protein–ligand complexes, automation of structure redetermination, and the use of NMR structures and computational models to solve X-ray crystal structures by molecular replacement. PMID:24203341

Evaluate the application of modal test and analysis processes to structural fault detection in MSFC - STS project elements

NASA Technical Reports Server (NTRS)

Springer, William T.

1987-01-01

The Space Transportation System (STS) is a complex and expensive flight system intended to carry unique payloads into low Earth orbit and return. A catastrophic failure, such as STS 51-L, resulted in the loss of both human life as well as expensive and unique hardware. The impact of this incident reaffirms the need to do everything possible to ensure the integrity and reliability of STS. One means of achieving this goal is to expand the number of inspection technologies available. Reported here is the evaluation of the use of modal analysis and test techniques for the purpose of assessing the structural integrity of STS components for which Marshall Space Flight Center has responsibility. This entailed reviewing existing literature and developing a low-level experimental program determine the feasibility of using this technology for structural fault detection.

EPOS Thematic Core Service Anthropogenic Hazards: Implementation Plan

NASA Astrophysics Data System (ADS)

Orlecka-Sikora, Beata; Lasocki, Stanislaw; Grasso, Jean Robert; Schmittbuhl, Jean; Styles, Peter; Kwiatek, Grzegorz; Sterzel, Mariusz; Garcia, Alexander

2015-04-01

EPOS Thematic Core Service ANTHROPOGENIC HAZARDS (TCS AH) aims to integrate distributed research infrastructures (RI) to facilitate and stimulate research on anthropogenic hazards (AH) especially those associated with the exploration and exploitation of geo-resources. The innovative element is the uniqueness of the integrated RI which comprises two main deliverables: (1) Exceptional datasets, called "episodes", which comprehensively describe a geophysical process; induced or triggered by human technological activity, posing hazard for populations, infrastructure and the environment, (2) Problem-oriented, bespoke services uniquely designed for the discrimination and analysis of correlations between technology, geophysical response and resulting hazard. These objectives will be achieved through the Science-Industry Synergy (SIS) built by EPOS WG10, ensuring bi-directional information exchange, including unique and previously unavailable data furnished by industrial partners. The Episodes and services to be integrated have been selected using strict criteria during the EPOS PP. The data are related to a wide spectrum of inducing technologies, with seismic/aseismic deformation and production history as a minimum data set requirement and the quality of software services is confirmed and referenced in literature. Implementation of TCS AH is planned for four years and requires five major activities: (1) Strategic Activities and Governance: will define and establish the governance structure to ensure the long-term sustainability of these research infrastructures for data provision through EPOS. (2) Coordination and Interaction with the Community: will establish robust communication channels within the whole TCS AH community while supporting global EPOS communication strategy. (3) Interoperability with EPOS Integrated Core Service (ICS) and Testing Activities: will coordinate and ensure interoperability between the RIs and the ICS. Within this modality a functional e-research environment with access to High-Performance Computing will be built. A prototype for such an environment is already under construction and will become operational in mid -2015 (is-epos.eu). (4) Integration of AH Episodes: will address at least 20 global episodes related to conventional hydrocarbon extraction, reservoir treatment, underground mining and geothermal energy production which will be integrated into the e-environment of TCS AH. All the multi-disciplinary heterogeneous data from these particular episodes will be transformed to unified structures to form integrated data sets articulated with the defined standards of ICS and other TCS's. (5) Implementation of services for analyzing Episodes: will deliver the protocols and methodologies for analysis of the seismic/deformation response to time-varying georesource exploitation technologies on long and short time scales and the related time- and technology-dependent seismic hazard issues.

The integral indicator of socio-economic assessment in regard to resource-oriented territories development in Russia

NASA Astrophysics Data System (ADS)

Chuvashova, M. N.; Avramchikova, N. T.; Zelenkov, P. V.; Petrosyan, M. O.

2016-04-01

Economic peculiarity of Russian resource-oriented territories are based on a focal type of industrial complex, differentiation of economies within a principle of mining and processing of natural resources. To improve the economic condition and integrate into the world innovative process is essential to solve the problem of eliminating the prevalence of resourse focus in the industrial economic structure that could ensure the overcoming of the existing spa- cial dissociation and market mechanisms development in innovative promotion. The monitoring system, involving the integral indicator of socioeconomic and territorial potential assessment, has suggested by the authors. The integral indicator could guarantee the objective evaluation of economic condition within a territory that is vital for the governmental authorities to design strategies providing the economic development of administrative territories.

Aging management program of the reactor building concrete at Point Lepreau Generating Station

NASA Astrophysics Data System (ADS)

Aldea, C.-M.; Shenton, B.; Demerchant, M. M.; Gendron, T.

2011-04-01

In order for New Brunswick Power Nuclear (NBPN) to control the risks of degradation of the concrete reactor building at the Point Lepreau Generating Station (PLGS) the development of an aging management plan (AMP) was initiated. The intention of this plan was to determine the requirements for specific structural components of concrete of the reactor building that require regular inspection and maintenance to ensure the safe and reliable operation of the plant. The document is currently in draft form and presents an integrated methodology for the application of an AMP for the concrete of the reactor building. The current AMP addresses the reactor building structure and various components, such as joint sealant and liners that are integral to the structure. It does not include internal components housed within the structure. This paper provides background information regarding the document developed and the strategy developed to manage potential degradation of the concrete of the reactor building, as well as specific programs and preventive and corrective maintenance activities initiated.

VIPR III VADR SPIDER Structural Design and Analysis

NASA Technical Reports Server (NTRS)

Li, Wesley; Chen, Tony

2016-01-01

In support of the National Aeronautics and Space Administration (NASA) Vehicle Integrated Propulsion Research (VIPR) Phase III team to evaluate the volcanic ash environment effects on the Pratt & Whitney F117-PW-100 turbofan engine, NASA Armstrong Flight Research Center has successfully performed structural design and analysis on the Volcanic Ash Distribution Rig (VADR) and the Structural Particulate Integration Device for Engine Research (SPIDER) for the ash ingestion test. Static and dynamic load analyses were performed to ensure no structural failure would occur during the test. Modal analysis was conducted, and the results were used to develop engine power setting avoidance zones. These engine power setting avoidance zones were defined to minimize the dwell time when the natural frequencies of the VADR/SPIDER system coincided with the excitation frequencies of the engine which was operating at various revolutions per minute. Vortex-induced vibration due to engine suction air flow during the ingestion test was also evaluated, but was not a concern.

Archaeal Genome Guardians Give Insights into Eukaryotic DNA Replication and Damage Response Proteins

PubMed Central

Shin, David S.; Pratt, Ashley J.; Tainer, John A.

2014-01-01

As the third domain of life, archaea, like the eukarya and bacteria, must have robust DNA replication and repair complexes to ensure genome fidelity. Archaea moreover display a breadth of unique habitats and characteristics, and structural biologists increasingly appreciate these features. As archaea include extremophiles that can withstand diverse environmental stresses, they provide fundamental systems for understanding enzymes and pathways critical to genome integrity and stress responses. Such archaeal extremophiles provide critical data on the periodic table for life as well as on the biochemical, geochemical, and physical limitations to adaptive strategies allowing organisms to thrive under environmental stress relevant to determining the boundaries for life as we know it. Specifically, archaeal enzyme structures have informed the architecture and mechanisms of key DNA repair proteins and complexes. With added abilities to temperature-trap flexible complexes and reveal core domains of transient and dynamic complexes, these structures provide insights into mechanisms of maintaining genome integrity despite extreme environmental stress. The DNA damage response protein structures noted in this review therefore inform the basis for genome integrity in the face of environmental stress, with implications for all domains of life as well as for biomanufacturing, astrobiology, and medicine. PMID:24701133

NASA Requirements for Ground-Based Pressure Vessels and Pressurized Systems (PVS). Revision C

NASA Technical Reports Server (NTRS)

Greulich, Owen Rudolf

2017-01-01

The purpose of this document is to ensure the structural integrity of PVS through implementation of a minimum set of requirements for ground-based PVS in accordance with this document, NASA Policy Directive (NPD) 8710.5, NASA Safety Policy for Pressure Vessels and Pressurized Systems, NASA Procedural Requirements (NPR) 8715.3, NASA General Safety Program Requirements, applicable Federal Regulations, and national consensus codes and standards (NCS).

Smurf2 Regulates DNA Repair and Packaging to Prevent Tumors | Center for Cancer Research

Cancer.gov

The blueprint for all of a cell’s functions is written in the genetic code of DNA sequences as well as in the landscape of DNA and histone modifications. DNA is wrapped around histones to package it into chromatin, which is stored in the nucleus. It is important to maintain the integrity of the chromatin structure to ensure that the cell continues to behave appropriately.

Porous biodegradable lumbar interbody fusion cage design and fabrication using integrated global-local topology optimization with laser sintering.

PubMed

Kang, Heesuk; Hollister, Scott J; La Marca, Frank; Park, Paul; Lin, Chia-Ying

2013-10-01

Biodegradable cages have received increasing attention for their use in spinal procedures involving interbody fusion to resolve complications associated with the use of nondegradable cages, such as stress shielding and long-term foreign body reaction. However, the relatively weak initial material strength compared to permanent materials and subsequent reduction due to degradation may be problematic. To design a porous biodegradable interbody fusion cage for a preclinical large animal study that can withstand physiological loads while possessing sufficient interconnected porosity for bony bridging and fusion, we developed a multiscale topology optimization technique. Topology optimization at the macroscopic scale provides optimal structural layout that ensures mechanical strength, while optimally designed microstructures, which replace the macroscopic material layout, ensure maximum permeability. Optimally designed cages were fabricated using solid, freeform fabrication of poly(ε-caprolactone) mixed with hydroxyapatite. Compression tests revealed that the yield strength of optimized fusion cages was two times that of typical human lumbar spine loads. Computational analysis further confirmed the mechanical integrity within the human lumbar spine, although the pore structure locally underwent higher stress than yield stress. This optimization technique may be utilized to balance the complex requirements of load-bearing, stress shielding, and interconnected porosity when using biodegradable materials for fusion cages.

Institutional conditions for IWRM: the Israeli case.

PubMed

Fischhendler, Itay

2008-01-01

Many places in the world are experiencing a water crisis. This water crisis is attributed to a governance crisis, whereas often fragmented institutional and physical water structures are used to explain a policy of overexploitation. The Israeli water system, which adopted integrated water resource management (IWRM), is often cited as a model for other countries struggling with fragmented water systems. Yet, despite the exceptional degree of integration, Israel in the past two decades has adopted an unsustainable water policy. The aim of this study is to understand this failure and thereby to postulate on the institutional conditions required for successful implementation of IWRM. The study focuses on the politics of water allocation during the drought of 1999 to 2002. It was found that the failure originates in setting administrative divisions in the decision-making process and in differential checks, with no balances implicitly instituted within the integrated water system. These two factors have resulted in a water system that is physically integrated but is not coupled by a balanced institutional structure. This case study teaches us that when reforming the water sector along IWRM lines, measures must be taken to ensure that the physical integration coincides with a balanced institutional integration-otherwise the results may be worse than if there were no integration at all.

International Space Station Configuration Analysis and Integration

NASA Technical Reports Server (NTRS)

Anchondo, Rebekah

2016-01-01

Ambitious engineering projects, such as NASA's International Space Station (ISS), require dependable modeling, analysis, visualization, and robotics to ensure that complex mission strategies are carried out cost effectively, sustainably, and safely. Learn how Booz Allen Hamilton's Modeling, Analysis, Visualization, and Robotics Integration Center (MAVRIC) team performs engineering analysis of the ISS Configuration based primarily on the use of 3D CAD models. To support mission planning and execution, the team tracks the configuration of ISS and maintains configuration requirements to ensure operational goals are met. The MAVRIC team performs multi-disciplinary integration and trade studies to ensure future configurations meet stakeholder needs.

Structure and dynamics of European sports science textual contents: Analysis of ECSS abstracts (1996-2014).

PubMed

Hristovski, Robert; Aceski, Aleksandar; Balague, Natalia; Seifert, Ludovic; Tufekcievski, Aleksandar; Cecilia, Aguirre

2017-02-01

The article discusses general structure and dynamics of the sports science research content as obtained from the analysis of 21998 European College of Sport Science abstracts belonging to 12 science topics. The structural analysis showed intertwined multidisciplinary and unifying tendencies structured along horizontal (scope) and vertical (level) axes. Methodological (instrumental and mode of inquiry) integrative tendencies are dominant. Theoretical integrative tendencies are much less detectable along both horizontal and vertical axes. The dynamic analysis of written abstracts text content over the 19 years reveals the contextualizing and guiding role of thematic skeletons of each sports science topic in forming more detailed contingent research ideas and the role of the latter in stabilizing and procreating the former. This circular causality between both hierarchical levels and functioning on separate characteristic time scales is crucial for understanding how stable research traditions self-maintain and self-procreate through innovative contingencies. The structure of sports science continuously rebuilds itself through use and re-use of contingent research ideas. The thematic skeleton ensures its identity and the contingent conceptual sets its flexibility and adaptability to different research or applicative problems.

Improving the reliability of road materials based on micronized sulfur composites

NASA Astrophysics Data System (ADS)

Abdrakhmanova, K. K.

2015-01-01

The work contains the results of a nano-structural modification of sulfur that prevents polymorphic transformations from influencing the properties of sulfur composites where sulfur is present in a thermodynamic stable condition that precludes destruction when operated. It has been established that the properties of sulfur-based composite materials can be significantly improved by modifying sulfur and structuring sulfur binder by nano-dispersed fiber particles and ultra-dispersed state filler. The paper shows the possibility of modifying Tengiz sulfur by its fragmenting which ensures that the structured sulfur is structurally changed and stabilized through reinforcement by ultra-dispersed fiber particles allowing the phase contact area to be multiplied. Interaction between nano-dispersed fibers of chrysotile asbestos and sulfur ensures the implementation of the mechanical properties of chrysotile asbestos tubes in reinforced composite and its integrity provided that the surface of chrysotile asbestos tubes are highly moistened with molten sulfur and there is high adhesion between the tubes and the matrix that, in addition to sulfur, contains limestone microparticles. Ability to apply materials in severe operation conditions and possibility of exposure in both aggressive medium and mechanical loads makes produced sulfur composites required by the road construction industry.

MIP on the radar: the new drive to end Medicaid fraud.

PubMed

Fusto, John

2008-06-01

To ensure their billing integrity, providers should: Review every aspect of their billing integrity compliance program; Review the existing quality and methods of their statistical sampling; Examine an agency's or prosecutor's findings of loss to ensure accurate loss calculation.

Asynchronous variational integration using continuous assumed gradient elements.

PubMed

Wolff, Sebastian; Bucher, Christian

2013-03-01

Asynchronous variational integration (AVI) is a tool which improves the numerical efficiency of explicit time stepping schemes when applied to finite element meshes with local spatial refinement. This is achieved by associating an individual time step length to each spatial domain. Furthermore, long-term stability is ensured by its variational structure. This article presents AVI in the context of finite elements based on a weakened weak form (W2) Liu (2009) [1], exemplified by continuous assumed gradient elements Wolff and Bucher (2011) [2]. The article presents the main ideas of the modified AVI, gives implementation notes and a recipe for estimating the critical time step.

Polymer coating for immobilizing soluble ions in a phosphate ceramic product

DOEpatents

Singh, Dileep; Wagh, Arun S.; Patel, Kartikey D.

2000-01-01

A polymer coating is applied to the surface of a phosphate ceramic composite to effectively immobilize soluble salt anions encapsulated within the phosphate ceramic composite. The polymer coating is made from ceramic materials, including at least one inorganic metal compound, that wet and adhere to the surface structure of the phosphate ceramic composite, thereby isolating the soluble salt anions from the environment and ensuring long-term integrity of the phosphate ceramic composite.

CMOS-Compatible Room-Temperature Rectifier Toward Terahertz Radiation Detection

NASA Astrophysics Data System (ADS)

Varlamava, Volha; De Amicis, Giovanni; Del Monte, Andrea; Perticaroli, Stefano; Rao, Rosario; Palma, Fabrizio

2016-08-01

In this paper, we present a new rectifying device, compatible with the technology of CMOS image sensors, suitable for implementing a direct-conversion detector operating at room temperature for operation at up to terahertz frequencies. The rectifying device can be obtained by introducing some simple modifications of the charge-storage well in conventional CMOS integrated circuits, making the proposed solution easy to integrate with the existing imaging systems. The rectifying device is combined with the different elements of the detector, composed of a 3D high-performance antenna and a charge-storage well. In particular, its position just below the edge of the 3D antenna takes maximum advantage of the high electric field concentrated by the antenna itself. In addition, the proposed structure ensures the integrity of the charge-storage well of the detector. In the structure, it is not necessary to use very scaled and costly technological nodes, since the CMOS transistor only provides the necessary integrated readout electronics. On-wafer measurements of RF characteristics of the designed junction are reported and discussed. The overall performances of the entire detector in terms of noise equivalent power (NEP) are evaluated by combining low-frequency measurements of the rectifier with numerical simulations of the 3D antenna and the semiconductor structure at 1 THz, allowing prediction of the achievable NEP.

Embedded-explicit emergent literacy intervention I: Background and description of approach.

PubMed

Justice, Laura M; Kaderavek, Joan N

2004-07-01

This article, the first of a two-part series, provides background information and a general description of an emergent literacy intervention model for at-risk preschoolers and kindergartners. The embedded-explicit intervention model emphasizes the dual importance of providing young children with socially embedded opportunities for meaningful, naturalistic literacy experiences throughout the day, in addition to regular structured therapeutic interactions that explicitly target critical emergent literacy goals. The role of the speech-language pathologist (SLP) in the embedded-explicit model encompasses both indirect and direct service delivery: The SLP consults and collaborates with teachers and parents to ensure the highest quality and quantity of socially embedded literacy-focused experiences and serves as a direct provider of explicit interventions using structured curricula and/or lesson plans. The goal of this integrated model is to provide comprehensive emergent literacy interventions across a spectrum of early literacy skills to ensure the successful transition of at-risk children from prereaders to readers.

Solid-State (13)C NMR Delineates the Architectural Design of Biopolymers in Native and Genetically Altered Tomato Fruit Cuticles.

PubMed

Chatterjee, Subhasish; Matas, Antonio J; Isaacson, Tal; Kehlet, Cindie; Rose, Jocelyn K C; Stark, Ruth E

2016-01-11

Plant cuticles on outer fruit and leaf surfaces are natural macromolecular composites of waxes and polyesters that ensure mechanical integrity and mitigate environmental challenges. They also provide renewable raw materials for cosmetics, packaging, and coatings. To delineate the structural framework and flexibility underlying the versatile functions of cutin biopolymers associated with polysaccharide-rich cell-wall matrices, solid-state NMR spectra and spin relaxation times were measured in a tomato fruit model system, including different developmental stages and surface phenotypes. The hydrophilic-hydrophobic balance of the cutin ensures compatibility with the underlying polysaccharide cell walls; the hydroxy fatty acid structures of outer epidermal cutin also support deposition of hydrophobic waxes and aromatic moieties while promoting the formation of cell-wall cross-links that rigidify and strengthen the cuticle composite during fruit development. Fruit cutin-deficient tomato mutants with compromised microbial resistance exhibit less efficient local and collective biopolymer motions, stiffening their cuticular surfaces and increasing their susceptibility to fracture.

Engineering aspects of design and integration of ECE diagnostic in ITER

DOE PAGES

Udintsev, V. S.; Taylor, G.; Pandya, H. K.B.; ...

2015-03-12

ITER ECE diagnostic [1] needs not only to meet measurement requirements, but also to withstand various loads, such as electromagnetic, mechanical, neutronic and thermal, and to be protected from stray ECH radiation at 170 GHz and other millimeter wave emission, like Collective Thomson scattering which is planned to operate at 60 GHz. Same or similar loads will be applied to other millimetre-wave diagnostics [2], located both in-vessel and in-port plugs. These loads must be taken into account throughout the design phases of the ECE and other microwave diagnostics to ensure their structural integrity and maintainability. The integration of microwave diagnosticsmore » with other ITER systems is another challenging activity which is currently ongoing through port integration and in-vessel integration work. Port Integration has to address the maintenance and the safety aspects of diagnostics, too. Engineering solutions which are being developed to support and to operate ITER ECE diagnostic, whilst complying with safety and maintenance requirements, are discussed in this paper.« less

Study of metallic structural design concepts for an arrow wing supersonic cruise configuration

NASA Technical Reports Server (NTRS)

Turner, M. J.; Grande, D. L.

1977-01-01

A structural design study was made, to assess the relative merits of various metallic structural concepts and materials for an advanced supersonic aircraft cruising at Mach 2.7. Preliminary studies were made to ensure compliance of the configuration with general design criteria, integrate the propulsion system with the airframe, select structural concepts and materials, and define an efficient structural arrangement. An advanced computerized structural design system was used, in conjunction with a relatively large, complex finite element model, for detailed analysis and sizing of structural members to satisfy strength and flutter criteria. A baseline aircraft design was developed for assessment of current technology. Criteria, analysis methods, and results are presented. The effect on design methods of using the computerized structural design system was appraised, and recommendations are presented concerning further development of design tools, development of materials and structural concepts, and research on basic technology.

Multi-time scale control of demand flexibility in smart distribution networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhattarai, Bishnu; Myers, Kurt; Bak-Jensen, Birgitte

This study presents a multi-timescale control strategy to deploy demand flexibilities of electric vehicles (EV) for providing system balancing and local congestion management by simultaneously ensuring economic benefits to participating actors. First, the EV charging problem from consumer, aggregator, and grid operator’s perspective is investigated. A hierarchical control architecture (HCA) comprising scheduling, coordinative, and adaptive layers is then designed to realize their coordinative goal. This is realized by integrating a multi-time scale control, which works from a day-ahead scheduling up to real-time adaptive control. The performance of the developed method is investigated with high EV penetration in a typical distributionmore » network. The simulation results demonstrates that HCA exploit EV flexibility to solve grid unbalancing and congestions with simultaneous maximization of economic benefits by ensuring EV participation to day-ahead, balancing, and regulation markets. For the given network configuration and pricing structure, HCA ensures the EV owners to get paid up to 5 times the cost they were paying without control.« less

Multi-time scale control of demand flexibility in smart distribution networks

DOE PAGES

Bhattarai, Bishnu; Myers, Kurt; Bak-Jensen, Birgitte; ...

2017-01-01

This study presents a multi-timescale control strategy to deploy demand flexibilities of electric vehicles (EV) for providing system balancing and local congestion management by simultaneously ensuring economic benefits to participating actors. First, the EV charging problem from consumer, aggregator, and grid operator’s perspective is investigated. A hierarchical control architecture (HCA) comprising scheduling, coordinative, and adaptive layers is then designed to realize their coordinative goal. This is realized by integrating a multi-time scale control, which works from a day-ahead scheduling up to real-time adaptive control. The performance of the developed method is investigated with high EV penetration in a typical distributionmore » network. The simulation results demonstrates that HCA exploit EV flexibility to solve grid unbalancing and congestions with simultaneous maximization of economic benefits by ensuring EV participation to day-ahead, balancing, and regulation markets. For the given network configuration and pricing structure, HCA ensures the EV owners to get paid up to 5 times the cost they were paying without control.« less

GRYPHON: Air launched space booster

NASA Technical Reports Server (NTRS)

1993-01-01

The project chosen for the winter semester Aero 483 class was the design of a next generation Air Launched Space Booster. Based on Orbital Sciences Corporation's Pegasus concept, the goal of Aero 483 was to design a 500,000 pound air launched space booster capable of delivering 17,000 pounds of payload to Low Earth Orbit and 8,000 pounds of payload to Geosynchronous Earth Orbit. The resulting launch vehicle was named the Gryphon. The class of forty senior aerospace engineering students was broken down into eight interdependent groups. Each group was assigned a subsystem or responsibility which then became their field of specialization. Spacecraft Integration was responsible for ensuring compatibility between subsystems. This group kept up to date on subsystem redesigns and informed those parties affected by the changes, monitored the vehicle's overall weight and dimensions, and calculated the mass properties of the booster. This group also performed the cost/profitability analysis of the Gryphon and obtained cost data for competing launch systems. The Mission Analysis Group was assigned the task of determining proper orbits, calculating the vehicle's flight trajectory for those orbits, and determining the aerodynamic characteristics of the vehicle. The Propulsion Group chose the engines that were best suited to the mission. This group also set the staging configurations for those engines and designed the tanks and fuel feed system. The commercial satellite market, dimensions and weights of typical satellites, and method of deploying satellites was determined by the Payloads Group. In addition, Payloads identified possible resupply packages for Space Station Freedom and identified those packages that were compatible with the Gryphon. The guidance, navigation, and control subsystems were designed by the Mission Control Group. This group identified required tracking hardware, communications hardware telemetry systems, and ground sites for the location of the Gryphon's mission control center. The Structures group was responsible for ensuring the structural integrity of the vehicle. Their designs included the payload shroud, payload support structure, exterior hull and engine support struts. The Gryphon's power requirements were determined by the Power/Thermal/Attitude Control Group. This group then selected suitable batteries and other components to meet these requirements. The group also designed heat shielding and cooling systems to ensure subsystem performance. In addition to these responsibilities this group designed the attitude control methods and RCS components for the vehicle. The Aircraft Integration Group was responsible for all aspects of the booster aircraft connection. This included the design of the connection structure and the drop mechanism. This group also designed the vehicle assembly facility and identified possible ground bases for the plane.

GRYPHON: Air launched space booster

NASA Astrophysics Data System (ADS)

1993-06-01

The project chosen for the winter semester Aero 483 class was the design of a next generation Air Launched Space Booster. Based on Orbital Sciences Corporation's Pegasus concept, the goal of Aero 483 was to design a 500,000 pound air launched space booster capable of delivering 17,000 pounds of payload to Low Earth Orbit and 8,000 pounds of payload to Geosynchronous Earth Orbit. The resulting launch vehicle was named the Gryphon. The class of forty senior aerospace engineering students was broken down into eight interdependent groups. Each group was assigned a subsystem or responsibility which then became their field of specialization. Spacecraft Integration was responsible for ensuring compatibility between subsystems. This group kept up to date on subsystem redesigns and informed those parties affected by the changes, monitored the vehicle's overall weight and dimensions, and calculated the mass properties of the booster. This group also performed the cost/profitability analysis of the Gryphon and obtained cost data for competing launch systems. The Mission Analysis Group was assigned the task of determining proper orbits, calculating the vehicle's flight trajectory for those orbits, and determining the aerodynamic characteristics of the vehicle. The Propulsion Group chose the engines that were best suited to the mission. This group also set the staging configurations for those engines and designed the tanks and fuel feed system. The commercial satellite market, dimensions and weights of typical satellites, and method of deploying satellites was determined by the Payloads Group. In addition, Payloads identified possible resupply packages for Space Station Freedom and identified those packages that were compatible with the Gryphon. The guidance, navigation, and control subsystems were designed by the Mission Control Group. This group identified required tracking hardware, communications hardware telemetry systems, and ground sites for the location of the Gryphon's mission control center. The Structures group was responsible for ensuring the structural integrity of the vehicle. Their designs included the payload shroud, payload support structure, exterior hull and engine support struts. The Gryphon's power requirements were determined by the Power/Thermal/Attitude Control Group.

Combining cognitive engineering and information fusion architectures to build effective joint systems

NASA Astrophysics Data System (ADS)

Sliva, Amy L.; Gorman, Joe; Voshell, Martin; Tittle, James; Bowman, Christopher

2016-05-01

The Dual Node Decision Wheels (DNDW) architecture concept was previously described as a novel approach toward integrating analytic and decision-making processes in joint human/automation systems in highly complex sociotechnical settings. In this paper, we extend the DNDW construct with a description of components in this framework, combining structures of the Dual Node Network (DNN) for Information Fusion and Resource Management with extensions on Rasmussen's Decision Ladder (DL) to provide guidance on constructing information systems that better serve decision-making support requirements. The DNN takes a component-centered approach to system design, decomposing each asset in terms of data inputs and outputs according to their roles and interactions in a fusion network. However, to ensure relevancy to and organizational fitment within command and control (C2) processes, principles from cognitive systems engineering emphasize that system design must take a human-centered systems view, integrating information needs and decision making requirements to drive the architecture design and capabilities of network assets. In the current work, we present an approach for structuring and assessing DNDW systems that uses a unique hybrid DNN top-down system design with a human-centered process design, combining DNN node decomposition with artifacts from cognitive analysis (i.e., system abstraction decomposition models, decision ladders) to provide work domain and task-level insights at different levels in an example intelligence, surveillance, and reconnaissance (ISR) system setting. This DNDW structure will ensure not only that the information fusion technologies and processes are structured effectively, but that the resulting information products will align with the requirements of human decision makers and be adaptable to different work settings .

Viruses Associated with Human Cancer

PubMed Central

McLaughlin-Drubin, Margaret E.; Munger, Karl

2008-01-01

It is estimated that viral infections contribute to 15–20% of all human cancers. As obligatory intracellular parasites, viruses encode proteins that reprogram host cellular signaling pathways that control proliferation, differentiation, cell death, genomic integrity, and recognition by the immune system. These cellular processes are governed by complex and redundant regulatory networks and are surveyed by sentinel mechanisms that ensure that aberrant cells are removed from the proliferative pool. Given that the genome size of a virus is highly restricted to ensure packaging within an infectious structure, viruses must target cellular regulatory nodes with limited redundancy and need to inactivate surveillance mechanisms that would normally recognize and extinguish such abnormal cells. In many cases, key proteins in these same regulatory networks are subject to mutation in non-virally associated diseases and cancers. Oncogenic viruses have thus served as important experimental models to identify and molecularly investigate such cellular networks. These include the discovery of oncogenes and tumor suppressors, identification of regulatory networks that are critical for maintenance of genomic integrity, and processes that govern immune surveillance. PMID:18201576

A new diagnostic method of bolt loosening detection for thermal protection systems

NASA Astrophysics Data System (ADS)

Xie, Weihua; Meng, Songhe; Han, Jiecai; Du, Shanyi; Zhang, Boming; Yu, Dong

2009-07-01

Research and development efforts are underway to provide structural health monitoring systems to ensure the integrity of thermal protection system (TPS). An improved analytical method was proposed to assess the fastener integrity of a bolted structure in this paper. A new unsymmetrical washer was designed and fabricated, taking full advantage of piezoelectric ceramics (PZT) to play both roles as actuators and sensors, and using energy as the only extracted feature to identify abnormality. This diagnostic method is not restricted by the materials of the bracket, panel and base structure of the TPS whose condition is under inspection. A series of experiments on a metallic honeycomb sandwich panel were completed to demonstrate the capability of detecting bolt loosening on the TPS structure. Studies showed that this method can be used not only to identify the location of loosened bolts rapidly, but also to estimate the torque level of loosening bolts. Since that energy is the only extracted feature used to detect bolt loosening in this method, the diagnostic process become very simple and swift without sacrificing the accuracy of the results.

Integrating semantic dimension into openEHR archetypes for the management of cerebral palsy electronic medical records.

PubMed

Ellouze, Afef Samet; Bouaziz, Rafik; Ghorbel, Hanen

2016-10-01

Integrating semantic dimension into clinical archetypes is necessary once modeling medical records. First, it enables semantic interoperability and, it offers applying semantic activities on clinical data and provides a higher design quality of Electronic Medical Record (EMR) systems. However, to obtain these advantages, designers need to use archetypes that cover semantic features of clinical concepts involved in their specific applications. In fact, most of archetypes filed within open repositories are expressed in the Archetype Definition Language (ALD) which allows defining only the syntactic structure of clinical concepts weakening semantic activities on the EMR content in the semantic web environment. This paper focuses on the modeling of an EMR prototype for infants affected by Cerebral Palsy (CP), using the dual model approach and integrating semantic web technologies. Such a modeling provides a better delivery of quality of care and ensures semantic interoperability between all involved therapies' information systems. First, data to be documented are identified and collected from the involved therapies. Subsequently, data are analyzed and arranged into archetypes expressed in accordance of ADL. During this step, open archetype repositories are explored, in order to find the suitable archetypes. Then, ADL archetypes are transformed into archetypes expressed in OWL-DL (Ontology Web Language - Description Language). Finally, we construct an ontological source related to these archetypes enabling hence their annotation to facilitate data extraction and providing possibility to exercise semantic activities on such archetypes. Semantic dimension integration into EMR modeled in accordance to the archetype approach. The feasibility of our solution is shown through the development of a prototype, baptized "CP-SMS", which ensures semantic exploitation of CP EMR. This prototype provides the following features: (i) creation of CP EMR instances and their checking by using a knowledge base which we have constructed by interviews with domain experts, (ii) translation of initially CP ADL archetypes into CP OWL-DL archetypes, (iii) creation of an ontological source which we can use to annotate obtained archetypes and (vi) enrichment and supply of the ontological source and integration of semantic relations by providing hence fueling the ontology with new concepts, ensuring consistency and eliminating ambiguity between concepts. The degree of semantic interoperability that could be reached between EMR systems depends strongly on the quality of the used archetypes. Thus, the integration of semantic dimension in archetypes modeling process is crucial. By creating an ontological source and annotating archetypes, we create a supportive platform ensuring semantic interoperability between archetypes-based EMR-systems. Copyright © 2016. Published by Elsevier Inc.

The practical implementation of fatigue requirements to military aircraft and helicopters in the United Kingdom

NASA Technical Reports Server (NTRS)

Maxwell, R. D. J.

1972-01-01

The methods adopted in the United Kingdom to ensure the structural integrity of military aeroplanes and helicopters from the fatigue point of view are described. The procedure adopted from the writing of the specification to the monitoring of fatigue life in service are presented along with the requirements to be met and the way in which they are satisfied. Some of the outstanding problems that remain to be solved are indicated.

Methodology for Designing Operational Banking Risks Monitoring System

NASA Astrophysics Data System (ADS)

Kostjunina, T. N.

2018-05-01

The research looks at principles of designing an information system for monitoring operational banking risks. A proposed design methodology enables one to automate processes of collecting data on information security incidents in the banking network, serving as the basis for an integrated approach to the creation of an operational risk management system. The system can operate remotely ensuring tracking and forecasting of various operational events in the bank network. A structure of a content management system is described.

System Architecture for a Military Weapon System Development Process to Integrate Design and the Manufacturing Process for Use by a Government Technical Development Agency

DTIC Science & Technology

2014-09-01

elements of functional structure. Frequently the requirement for this is to ensure long- term retention of skilled people through the provision of an...operational and manufacturable, greatly reducing the design work remaining for Milestone C. 14. SUBJECT TERMS System Architecture, manufacturing...specialized ammunition technology item such as a fuze takes too long, from initial concept through final production design, which is approved for

8 strategies for hospital borrowers in 2011.

PubMed

Blake, James W; Jordahl, Eric A; Majka, Andrew J

2011-04-01

Given the likelihood that volatility and unexpected events will continue to challenge the capital markets, healthcare borrowers should implement the following strategic responses: Protect the organization's credit rating. Identify and address organizationwide risk. Establish a global capital strategy for the hospital. Diversify debt and investments. Anticipate challenges in the banking market. Anticipate challenges in the municipal bond market. Fully integrate leasing into the organization's capital structure strategy. Ensure the solidity of the organization's financial plan and future strategies.

Integration of biochemical sensors into wearable biomaterial platforms

NASA Astrophysics Data System (ADS)

Jandhyala, Sidhartha; Walper, Scott A.; Cargill, Allison A.; Ozual, Abigail; Daniele, Michael A.

2016-05-01

With rapidly inflating healthcare costs, a limited supply of physicians and an alarming surge in lifestyle diseases, radical changes must be made to improve preventative medicine and ensure a sustainable healthcare system. A compelling solution is to equip the population with wearable health monitors to continuously record representative and actionable physiological data. Herein, we present a preliminary design and evaluation of a biochemical sensor node enabled by a substrate comprised of a nanocellulose thin-film that conforms to the skin and carries a printed sensor element. The nanocellulose layer ensures conformal and biocompatible contact with the skin, while a printed layer provides a high surface-area electrode. While the recognition/transduction element can be exchanged for many different sensing motifs, we utilize the general structure of an electrochemical glucose sensor.

Human-Automation Integration: Principle and Method for Design and Evaluation

NASA Technical Reports Server (NTRS)

Billman, Dorrit; Feary, Michael

2012-01-01

Future space missions will increasingly depend on integration of complex engineered systems with their human operators. It is important to ensure that the systems that are designed and developed do a good job of supporting the needs of the work domain. Our research investigates methods for needs analysis. We included analysis of work products (plans for regulation of the space station) as well as work processes (tasks using current software), in a case study of Attitude Determination and Control Officers (ADCO) planning work. This allows comparing how well different designs match the structure of the work to be supported. Redesigned planning software that better matches the structure of work was developed and experimentally assessed. The new prototype enabled substantially faster and more accurate performance in plan revision tasks. This success suggests the approach to needs assessment and use in design and evaluation is promising, and merits investigatation in future research.

Application of Advanced Fracture Mechanics Technology to Ensure Structural Reliability in Critical Titanium Structures,

DTIC Science & Technology

1982-11-22

RD-Ri42 354 APPLICATION OF ADVANCED FRACTURE MECHANICS TECHNOLOGY i/i TT ENSURE STRUCTURA..(U) 1WESTINGHOUSE RESEARCH FND DEVELOPMENT CENTER...I Iml .4. 47 Igo 12. 4 %B 1. __ ~. ~% ski Z L __ 12 APPLICATION OF ADVANCED FRACTURE MECHANICS -p TECHNOLOGY TO ENSURE STRUCTURAL RELIABILITY IN...Road W Pilttsburgh. Pennsylvania 15235 84 06 18 207 APPLICATION OF ADVANCED FRACTURE MECHANICS TECHNOLOGY TO ENSURE STRUCTURAL RELIABILITY IN CRITICAL

Adaptive control of large space structures using recursive lattice filters

NASA Technical Reports Server (NTRS)

Sundararajan, N.; Goglia, G. L.

1985-01-01

The use of recursive lattice filters for identification and adaptive control of large space structures is studied. Lattice filters were used to identify the structural dynamics model of the flexible structures. This identification model is then used for adaptive control. Before the identified model and control laws are integrated, the identified model is passed through a series of validation procedures and only when the model passes these validation procedures is control engaged. This type of validation scheme prevents instability when the overall loop is closed. Another important area of research, namely that of robust controller synthesis, was investigated using frequency domain multivariable controller synthesis methods. The method uses the Linear Quadratic Guassian/Loop Transfer Recovery (LQG/LTR) approach to ensure stability against unmodeled higher frequency modes and achieves the desired performance.

Definition of ground test for Large Space Structure (LSS) control verification

NASA Technical Reports Server (NTRS)

Waites, H. B.; Doane, G. B., III; Tollison, D. K.

1984-01-01

An overview for the definition of a ground test for the verification of Large Space Structure (LSS) control is given. The definition contains information on the description of the LSS ground verification experiment, the project management scheme, the design, development, fabrication and checkout of the subsystems, the systems engineering and integration, the hardware subsystems, the software, and a summary which includes future LSS ground test plans. Upon completion of these items, NASA/Marshall Space Flight Center will have an LSS ground test facility which will provide sufficient data on dynamics and control verification of LSS so that LSS flight system operations can be reasonably ensured.

Integration of mechanism and control for large-angle slew maneuvers of flexible structures

NASA Technical Reports Server (NTRS)

Chew, Meng-Sang

1991-01-01

A rolling contact noncircular gear system is applied to assist a desired controller in the slewing of a flexible space structure. The varying gear ratio in cooperation with the controller results in lower feedback gains at the controller, as well as considerably reducing flexural vibrations of the space structure. The noncircular gears consist of a pair of convex noncircular cylinders with specially designed profiles that are synthesized in conjunction with the optimal controller gains for minimizing the flexural vibrations of flexible structure during a slew maneuver. Convexity of the cylindrical profiles for this noncircular gear device must be ensured to maintain rolling contact between the two cylinders. Simulations of slewing control tasks for two kinds of flexible space structures, such as a planar flexible beam and the planar articulated flexible beams, are presented.

Integrating care for high-risk patients in England using the virtual ward model: lessons in the process of care integration from three case sites

PubMed Central

Lewis, Geraint; Vaithianathan, Rhema; Wright, Lorraine; Brice, Mary R; Lovell, Paul; Rankin, Seth; Bardsley, Martin

2013-01-01

Background Patients at high risk of emergency hospitalisation are particularly likely to experience fragmentation in care. The virtual ward model attempts to integrate health and social care by offering multidisciplinary case management to people at high predicted risk of unplanned hospitalisation. Objective To describe the care practice in three virtual ward sites in England and to explore how well each site had achieved meaningful integration. Method Case studies conducted in Croydon, Devon and Wandsworth during 2011–2012, consisting of semi-structured interviews, workshops, and site visits. Results Different versions of the virtual wards intervention had been implemented in each site. In Croydon, multidisciplinary care had reverted back to one-to-one case management. Conclusions To integrate successfully, virtual ward projects should safeguard the multidisciplinary nature of the intervention, ensure the active involvement of General Practitioners, and establish feedback processes to monitor performance such as the number of professions represented at each team meeting. PMID:24250284

Frobenius manifolds and Frobenius algebra-valued integrable systems

NASA Astrophysics Data System (ADS)

Strachan, Ian A. B.; Zuo, Dafeng

2017-06-01

The notion of integrability will often extend from systems with scalar-valued fields to systems with algebra-valued fields. In such extensions the properties of, and structures on, the algebra play a central role in ensuring integrability is preserved. In this paper, a new theory of Frobenius algebra-valued integrable systems is developed. This is achieved for systems derived from Frobenius manifolds by utilizing the theory of tensor products for such manifolds, as developed by Kaufmann (Int Math Res Not 19:929-952, 1996), Kontsevich and Manin (Inv Math 124: 313-339, 1996). By specializing this construction, using a fixed Frobenius algebra A, one can arrive at such a theory. More generally, one can apply the same idea to construct an A-valued topological quantum field theory. The Hamiltonian properties of two classes of integrable evolution equations are then studied: dispersionless and dispersive evolution equations. Application of these ideas are discussed, and as an example, an A-valued modified Camassa-Holm equation is constructed.

Laser light-section sensor automating the production of textile-reinforced composites

NASA Astrophysics Data System (ADS)

Schmitt, R.; Niggemann, C.; Mersmann, C.

2009-05-01

Due to their advanced weight-specific mechanical properties, the application of fibre-reinforced plastics (FRP) has been established as a key technology in several engineering areas. Textile-based reinforcement structures (Preform) in particular achieve a high structural integrity due to the multi-dimensional build-up of dry-fibre layers combined with 3D-sewing and further textile processes. The final composite parts provide enhanced damage tolerances through excellent crash-energy absorbing characteristics. For these reasons, structural parts (e.g. frame) will be integrated in next generation airplanes. However, many manufacturing processes for FRP are still involving manual production steps without integrated quality control. The non-automated production implies considerable process dispersion and a high rework rate. Before the final inspection there is no reliable information about the production status. This work sets metrology as the key to automation and thus an economically feasible production, applying a laser light-section sensor system (LLSS) to measure process quality and feed back the results to close control loops of the production system. The developed method derives 3D-measurements from height profiles acquired by the LLSS. To assure the textile's quality a full surface scan is conducted, detecting defects or misalignment by comparing the measurement results with a CAD model of the lay-up. The method focuses on signal processing of the height profiles to ensure a sub-pixel accuracy using a novel algorithm based on a non-linear least-square fitting to a set of sigmoid functions. To compare the measured surface points to the CAD model, material characteristics are incorporated into the method. This ensures that only the fibre layer of the textile's surface is included and gaps between the fibres or overlaying seams are neglected. Finally, determining the uncertainty in measurement according to the GUM-standard proofed the sensor system's accuracy. First tests under industrial conditions showed that applying this sensor after the drapery of each textile layer reduces the scrap quota by approximately 30%.

Care coordination in accountable care organizations: moving beyond structure and incentives.

PubMed

Press, Matthew J; Michelow, Marilyn D; MacPhail, Lucy H

2012-12-01

Accountable care organizations (ACOs) are considered by many to be a key component of healthcare delivery system improvement. One expectation is that the structural elements of the ACO model, including clinical integration and financial accountability, will lead to better coordination of care for patients. But, while structure and incentives may facilitate the delivery of coordinated care, they will not necessarily ensure that care coordination is done well. For that, physicians and other healthcare providers within ACOs must possess and utilize specific skills, particularly in the areas of collaboration, communication, and teamwork. In this article, we present strategies in 3 domains--training, support tools, and organizational culture--that ACOs can implement to foster the development of these skills and support their use in clinical practice.

Smart wing wind tunnel model design

NASA Astrophysics Data System (ADS)

Martin, Christopher A.; Jasmin, Larry; Flanagan, John S.; Appa, Kari; Kudva, Jayanth N.

1997-05-01

To verify the predicted benefits of the smart wing concept, two 16% scale wind tunnel models, one conventional and the other incorporating smart wing design features, were designed, fabricated and tested. Meticulous design of the two models was essential to: (1) ensure the required factor of safety of four for operation in the NASA Langley TDT wind tunnel, (2) efficiently integrate the smart actuation systems, (3) quantify the performance improvements, and (4) facilitate eventual scale-up to operational aircraft. Significant challenges were encountered in designing the attachment of the shape memory alloy control surfaces to the wing box, integration of the SMA torque tube in the wing structure, and development of control mechanisms to protect the model and the tunnel in the event of failure of the smart systems. In this paper, detailed design of the two models are presented. First, dynamic scaling of the models based on the geometry and structural details of the full- scale aircraft is presented. Next, results of the stress, divergence and flutter analyses are summarized. Finally some of the challenges of integrating the smart actuators with the model are highlighted.

An integrated green process: Subcritical water, enzymatic hydrolysis, and fermentation, for biohydrogen production from coconut husk.

PubMed

Muharja, Maktum; Junianti, Fitri; Ranggina, Dian; Nurtono, Tantular; Widjaja, Arief

2018-02-01

The objective of this work is to develop an integrated green process of subcritical water (SCW), enzymatic hydrolysis and fermentation of coconut husk (CCH) to biohydrogen. The maximum sugar yield was obtained at mild severity factor. This was confirmed by the degradation of hemicellulose, cellulose and lignin. The tendency of the changing of sugar yield as a result of increasing severity factor was opposite to the tendency of pH change. It was found that CO 2 gave a different tendency of severity factor compared to N 2 as the pressurizing gas. The result of SEM analysis confirmed the structural changes during SCW pretreatment. This study integrated three steps all of which are green processes which ensured an environmentally friendly process to produce a clean biohydrogen. Copyright © 2017 Elsevier Ltd. All rights reserved.

Cryo-EM structure of a late pre-40S ribosomal subunit from Saccharomyces cerevisiae

PubMed Central

Schmidt, Christian; Berninghausen, Otto; Becker, Thomas

2017-01-01

Mechanistic understanding of eukaryotic ribosome formation requires a detailed structural knowledge of the numerous assembly intermediates, generated along a complex pathway. Here, we present the structure of a late pre-40S particle at 3.6 Å resolution, revealing in molecular detail how assembly factors regulate the timely folding of pre-18S rRNA. The structure shows that, rather than sterically blocking 40S translational active sites, the associated assembly factors Tsr1, Enp1, Rio2 and Pno1 collectively preclude their final maturation, thereby preventing untimely tRNA and mRNA binding and error prone translation. Moreover, the structure explains how Pno1 coordinates the 3’end cleavage of the 18S rRNA by Nob1 and how the late factor’s removal in the cytoplasm ensures the structural integrity of the maturing 40S subunit. PMID:29155690

Monitoring of prestress losses using long-gauge fiber optic sensors

NASA Astrophysics Data System (ADS)

Abdel-Jaber, Hiba; Glisic, Branko

2017-04-01

Prestressed concrete has been increasingly used in the construction of bridges due to its superiority as a building material. This has necessitated better assessment of its on-site performance. One of the most important indicators of structural integrity and performance of prestressed concrete structures is the spatial distribution of prestress forces over time, i.e. prestress losses along the structure. Time-dependent prestress losses occur due to dimensional changes in the concrete caused by creep and shrinkage, in addition to strand relaxation. Maintaining certain force levels in the strands, and thus the concrete cross-sections, is essential to ensuring stresses in the concrete do not exceed design stresses, which could cause malfunction or failure of the structure. This paper presents a novel method for monitoring prestress losses based on long-gauge fiber optic sensors embedded in the concrete during construction. The method includes the treatment of varying environmental factors such as temperature to ensure accuracy of results in on-site applications. The method is presented as applied to a segment of a post-tensioned pedestrian bridge on the Princeton University campus, Streicker Bridge. The segment is a three-span continuous girder supported on steel columns, with sensors embedded at key locations along the structure during construction in October 2009. Temperature and strain measurements have been recorded intermittently since construction. The prestress loss results are compared to estimates from design documents.

Keys to strengthening the supply of routinely recommended vaccines: view from industry.

PubMed

Pisano, Wayne

2006-03-01

The vaccine enterprise in the United States is a remarkable success story that has resulted in freedom from disease for millions of children. Although some persons believe that this success is in danger because of recent vaccine shortages, the reality is otherwise. The existing system fundamentally works and should be strengthened and stabilized, to improve delivery of current vaccines and to establish a firm structure into which a new generation of vaccines can be integrated. Ten practical actions to strengthen supplies of vaccine and ensure the stability of these supplies were presented to the National Vaccine Advisory Committee in February 2002. The present article has been updated to include progress made since that time. By building on what is already in place and on what we know works, we can continue to ensure success for years to come.

Structural monitoring via microwave tomography-enhanced GPR: the Montagnole test site

NASA Astrophysics Data System (ADS)

Catapano, Ilaria; Di Napoli, Rosario; Soldovieri, Francesco; Bavusi, Massimo; Loperte, Antonio; Dumoulin, Jean

2012-08-01

Structural integrity assessment and monitoring of infrastructures are key factors to prevent and manage crisis events (natural disasters, terrorist attacks and so on) and ensure urban safety. This necessity motivates huge interest towards design, optimization and integration of non-invasive remote and in situ diagnostic techniques. In this framework, ground penetrating radar (GPR) is a well-assessed instrumentation, which allows one to attain information on the inner status of man-made structures while avoiding invasive tests. However, despite its potential, a more widespread use of GPR is actually affected by the difficulties in providing highly informative and easily interpretable images as an outcome of the overall diagnostics procedure. This drawback can be mitigated thanks to the use of microwave tomography (MT) as a data processing tool able to enhance the achievable reconstruction capabilities, and several proofs of its effectiveness have been already shown. In this paper, the potential of the MT approach is investigated in the framework of structural monitoring by an experiment carried out in the Montagnole test site in the French Alps, where the progressive damage of a one-scale concrete beam has been monitored thanks to the integration of several electromagnetic sensing techniques. In this framework, the capability of the MT-enhanced GPR strategy is examined with respect to the possibility of providing information about the damage of the rebar grid of the beam.

Renormalizing a viscous fluid model for large scale structure formation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Führer, Florian; Rigopoulos, Gerasimos, E-mail: fuhrer@thphys.uni-heidelberg.de, E-mail: gerasimos.rigopoulos@ncl.ac.uk

2016-02-01

Using the Stochastic Adhesion Model (SAM) as a simple toy model for cosmic structure formation, we study renormalization and the removal of the cutoff dependence from loop integrals in perturbative calculations. SAM shares the same symmetry with the full system of continuity+Euler equations and includes a viscosity term and a stochastic noise term, similar to the effective theories recently put forward to model CDM clustering. We show in this context that if the viscosity and noise terms are treated as perturbative corrections to the standard eulerian perturbation theory, they are necessarily non-local in time. To ensure Galilean Invariance higher ordermore » vertices related to the viscosity and the noise must then be added and we explicitly show at one-loop that these terms act as counter terms for vertex diagrams. The Ward Identities ensure that the non-local-in-time theory can be renormalized consistently. Another possibility is to include the viscosity in the linear propagator, resulting in exponential damping at high wavenumber. The resulting local-in-time theory is then renormalizable to one loop, requiring less free parameters for its renormalization.« less

Constellation Program Human-System Integration Requirements. Revision E, Nov. 19, 2010

NASA Technical Reports Server (NTRS)

Dory, Jonathan

2010-01-01

The Human-Systems Integration Requirements (HSIR) in this document drive the design of space vehicles, their systems, and equipment with which humans interface in the Constellation Program (CxP). These requirements ensure that the design of Constellation (Cx) systems is centered on the needs, capabilities, and limitations of the human. The HSIR provides requirements to ensure proper integration of human-to-system interfaces. These requirements apply to all mission phases, including pre-launch, ascent, Earth orbit, trans-lunar flight, lunar orbit, lunar landing, lunar ascent, Earth return, Earth entry, Earth landing, post-landing, and recovery. The Constellation Program must meet NASA's Agency-level human rating requirements, which are intended to ensure crew survival without permanent disability. The HSIR provides a key mechanism for achieving human rating of Constellation systems.

Assurance Technology Challenges of Advanced Space Systems

NASA Technical Reports Server (NTRS)

Chern, E. James

2004-01-01

The initiative to explore space and extend a human presence across our solar system to revisit the moon and Mars post enormous technological challenges to the nation's space agency and aerospace industry. Key areas of technology development needs to enable the endeavor include advanced materials, structures and mechanisms; micro/nano sensors and detectors; power generation, storage and management; advanced thermal and cryogenic control; guidance, navigation and control; command and data handling; advanced propulsion; advanced communication; on-board processing; advanced information technology systems; modular and reconfigurable systems; precision formation flying; solar sails; distributed observing systems; space robotics; and etc. Quality assurance concerns such as functional performance, structural integrity, radiation tolerance, health monitoring, diagnosis, maintenance, calibration, and initialization can affect the performance of systems and subsystems. It is thus imperative to employ innovative nondestructive evaluation methodologies to ensure quality and integrity of advanced space systems. Advancements in integrated multi-functional sensor systems, autonomous inspection approaches, distributed embedded sensors, roaming inspectors, and shape adaptive sensors are sought. Concepts in computational models for signal processing and data interpretation to establish quantitative characterization and event determination are also of interest. Prospective evaluation technologies include ultrasonics, laser ultrasonics, optics and fiber optics, shearography, video optics and metrology, thermography, electromagnetics, acoustic emission, x-ray, data management, biomimetics, and nano-scale sensing approaches for structural health monitoring.

Robust integral variable structure controller and pulse-width pulse-frequency modulated input shaper design for flexible spacecraft with mismatched uncertainty/disturbance.

PubMed

Hu, Qinglei

2007-10-01

This paper presents a dual-stage control system design method for the flexible spacecraft attitude maneuvering control by use of on-off thrusters and active vibration control by input shaper. In this design approach, attitude control system and vibration suppression were designed separately using lower order model. As a stepping stone, an integral variable structure controller with the assumption of knowing the upper bounds of the mismatched lumped perturbation has been designed which ensures exponential convergence of attitude angle and angular velocity in the presence of bounded uncertainty/disturbances. To reconstruct estimates of the system states for use in a full information variable structure control law, an asymptotic variable structure observer is also employed. In addition, the thruster output is modulated in pulse-width pulse-frequency so that the output profile is similar to the continuous control histories. For actively suppressing the induced vibration, the input shaping technique is used to modify the existing command so that less vibration will be caused by the command itself, which only requires information about the vibration frequency and damping of the closed-loop system. The rationale behind this hybrid control scheme is that the integral variable structure controller can achieve good precision pointing, even in the presence of uncertainties/disturbances, whereas the shaped input attenuator is applied to actively suppress the undesirable vibrations excited by the rapid maneuvers. Simulation results for the spacecraft model show precise attitude control and vibration suppression.

Canadian National Guidelines and Recommendations for Integrating Career Advising Into Medical School Curricula.

PubMed

Howse, Kelly; Harris, June; Dalgarno, Nancy

2017-11-01

Career planning, decision making about specialty choice, and preparation for residency matching are significant sources of stress for medical students. Attempts have been made to structure and formalize career advising by including it in accreditation standards. There is an expressed need for national guidelines on career advising for medical students. The Future of Medical Education in Canada Postgraduate (FMEC PG) Implementation Project was created to ensure Canadian medical trainees receive the best education possible. From this, a diverse sub-working group (SWG), representing different Canadian regions, was formed to review career advising processes across the country. The SWG developed, through a modified formal consensus methodology, a strategy for medical student career advising that is adaptable to all schools in alignment with existing accreditation standards. The SWG outlined five guiding principles and five essential elements for Canadian universities offering an MD degree with recommendations on how to integrate the elements into each school's career advising system. The five essential elements are a structured approach to career advising, information about available career options, elective guidance, preparation for residency applications, and social accountability. This Perspective endorses the view of the FMEC PG Implementation Project that national guidelines are important to ensure Canadian medical schools are consistently meeting accreditation standards by providing reliable and quality career advising to all medical students. The SWG's position, based on national and provincial feedback, is that these guidelines will stimulate discourse and action regarding the requirements and processes to carry out these recommendations nationwide and share across borders.

Using SysML for MBSE analysis of the LSST system

NASA Astrophysics Data System (ADS)

Claver, Charles F.; Dubois-Felsmann, Gregory; Delgado, Francisco; Hascall, Pat; Marshall, Stuart; Nordby, Martin; Schalk, Terry; Schumacher, German; Sebag, Jacques

2010-07-01

The Large Synoptic Survey Telescope is a complex hardware - software system of systems, making up a highly automated observatory in the form of an 8.4m wide-field telescope, a 3.2 billion pixel camera, and a peta-scale data processing and archiving system. As a project, the LSST is using model based systems engineering (MBSE) methodology for developing the overall system architecture coded with the Systems Modeling Language (SysML). With SysML we use a recursive process to establish three-fold relationships between requirements, logical & physical structural component definitions, and overall behavior (activities and sequences) at successively deeper levels of abstraction and detail. Using this process we have analyzed and refined the LSST system design, ensuring the consistency and completeness of the full set of requirements and their match to associated system structure and behavior. As the recursion process proceeds to deeper levels we derive more detailed requirements and specifications, and ensure their traceability. We also expose, define, and specify critical system interfaces, physical and information flows, and clarify the logic and control flows governing system behavior. The resulting integrated model database is used to generate documentation and specifications and will evolve to support activities from construction through final integration, test, and commissioning, serving as a living representation of the LSST as designed and built. We discuss the methodology and present several examples of its application to specific systems engineering challenges in the LSST design.

Hybrid Wing Body Planform Design with Vehicle Sketch Pad

NASA Technical Reports Server (NTRS)

Wells, Douglas P.; Olson, Erik D.

2011-01-01

The objective of this paper was to provide an update on NASA s current tools for design and analysis of hybrid wing body (HWB) aircraft with an emphasis on Vehicle Sketch Pad (VSP). NASA started HWB analysis using the Flight Optimization System (FLOPS). That capability is enhanced using Phoenix Integration's ModelCenter(Registered TradeMark). Model Center enables multifidelity analysis tools to be linked as an integrated structure. Two major components are linked to FLOPS as an example; a planform discretization tool and VSP. The planform discretization tool ensures the planform is smooth and continuous. VSP is used to display the output geometry. This example shows that a smooth & continuous HWB planform can be displayed as a three-dimensional model and rapidly sized and analyzed.

Mental health service users' experiences of diabetes care by Mental Health Nurses: an exploratory study.

PubMed

Nash, M

2014-10-01

This paper is a report of a study exploring mental health service users' (MHSUs') experiences of diabetes care. Diabetes is a growing clinical concern in mental health nursing practice. However, little is known about MHSUs' experience of diabetes care. This is a descriptive qualitative study. Semi-structured telephone interviews were held between June and October 2011, with seven MHSUs who had diabetes. Participants reported experiences of stigma and diagnostic overshadowing (DO) when reporting symptoms of diabetes or when feeling unwell. Participants also encountered a split between their mental health and diabetes care needs, which resulted in a lack of holistic or integrated care. All participants mentioned experiencing complications of diabetes even to the extent of diabetic ketoacidosis. Mental health nurses (MHNs) must critically reflect on their attitudes towards service users that report physical symptoms to ensure that stigma and DO do not constitute barriers to appropriate screening and treatment. The complex relationship that exists between mental illness and diabetes requires MHNs to ensure physical and mental health care are wholly integrated and not split. Education needs are apparent so that symptoms and complications can be recognized and treated accordingly. © 2014 John Wiley & Sons Ltd.

Use of knowledge-sharing web-based portal in gross and microscopic anatomy.

PubMed

Durosaro, Olayemi; Lachman, Nirusha; Pawlina, Wojciech

2008-12-01

Changes in worldwide healthcare delivery require review of current medical school curricula structure to develop learning outcomes that ensures mastery of knowledge and clinical competency. In the last 3 years, Mayo Medical School implemented outcomes-based curriculum to encompass new graduate outcomes. Standard courses were replaced by 6-week clinically-integrated didactic blocks separated by student-self selected academic enrichment activities. Gross and microscopic anatomy was integrated with radiology and genetics respectively. Laboratory components include virtual microscopy and anatomical dissection. Students assigned to teams utilise computer portals to share learning experiences. High-resolution computed tomographic (CT) scans of cadavers prior to dissection were made available for correlative learning between the cadaveric material and radiologic images. Students work in teams on assigned presentations that include histology, cell and molecular biology, genetics and genomic using the Nexus Portal, based on DrupalEd, to share their observations, reflections and dissection findings. New generation of medical students are clearly comfortable utilising web-based programmes that maximise their learning potential of conceptually difficult and labor intensive courses. Team-based learning approach emphasising the use of knowledge-sharing computer portals maximises opportunities for students to master their knowledge and improve cognitive skills to ensure clinical competency.

A Methodological Framework for Enterprise Information System Requirements Derivation

NASA Astrophysics Data System (ADS)

Caplinskas, Albertas; Paškevičiūtė, Lina

Current information systems (IS) are enterprise-wide systems supporting strategic goals of the enterprise and meeting its operational business needs. They are supported by information and communication technologies (ICT) and other software that should be fully integrated. To develop software responding to real business needs, we need requirements engineering (RE) methodology that ensures the alignment of requirements for all levels of enterprise system. The main contribution of this chapter is a requirement-oriented methodological framework allowing to transform business requirements level by level into software ones. The structure of the proposed framework reflects the structure of Zachman's framework. However, it has other intentions and is purposed to support not the design but the RE issues.

Design optimization studies using COSMIC NASTRAN

NASA Technical Reports Server (NTRS)

Pitrof, Stephen M.; Bharatram, G.; Venkayya, Vipperla B.

1993-01-01

The purpose of this study is to create, test and document a procedure to integrate mathematical optimization algorithms with COSMIC NASTRAN. This procedure is very important to structural design engineers who wish to capitalize on optimization methods to ensure that their design is optimized for its intended application. The OPTNAST computer program was created to link NASTRAN and design optimization codes into one package. This implementation was tested using two truss structure models and optimizing their designs for minimum weight, subject to multiple loading conditions and displacement and stress constraints. However, the process is generalized so that an engineer could design other types of elements by adding to or modifying some parts of the code.

Identification of Bacteria and Determination of Biological Indicators

NASA Technical Reports Server (NTRS)

Venkateswaran, Kasthuri; La Duc, Myron T.; Vaishampayan, Parag A.

2009-01-01

The ultimate goal of planetary protection research is to develop superior strategies for inactivating resistance bearing micro-organisms like Rummeli - bacillus stabekisii. By first identifying the particular physiologic pathway and/or structural component of the cell/spore that affords it such elevated tolerance, eradication regimes can then be designed to target these resistance-conferring moieties without jeopardizing the structural integrity of spacecraft hardware. Furthermore, hospitals and government agencies frequently use biological indicators to ensure the efficacy of a wide range of sterilization processes. The spores of Rummelibacillus stabekisii, which are far more resistant to many of such perturbations, could likely serve as a more significant biological indicator for potential survival than those being used currently.

A description of the ABCD organizational structure and communication framework.

PubMed

Auchter, Allison M; Hernandez Mejia, Margie; Heyser, Charles J; Shilling, Paul D; Jernigan, Terry L; Brown, Sandra A; Tapert, Susan F; Dowling, Gayathri J

2018-04-16

The Adolescent Brain Cognitive Development (ABCD) study is designed to be the largest study of brain development and child health in the United States, performing comprehensive assessments of 11,500 children repeatedly for 10 years. An endeavor of this magnitude requires an organized framework of governance and communication that promotes collaborative decision-making and dissemination of information. The ABCD consortium structure, built upon the Matrix Management approach of organizational theory, facilitates the integration of input from all institutions, numerous internal workgroups and committees, federal partners, and external advisory groups to make use of a broad range of expertise to ensure the study's success. Copyright © 2018 Elsevier Ltd. All rights reserved.

PDEMOD: Software for control/structures optimization

NASA Technical Reports Server (NTRS)

Taylor, Lawrence W., Jr.; Zimmerman, David

1991-01-01

Because of the possibility of adverse interaction between the control system and the structural dynamics of large, flexible spacecraft, great care must be taken to ensure stability and system performance. Because of the high cost of insertion of mass into low earth orbit, it is prudent to optimize the roles of structure and control systems simultaneously. Because of the difficulty and the computational burden in modeling and analyzing the control structure system dynamics, the total problem is often split and treated iteratively. It would aid design if the control structure system dynamics could be represented in a single system of equations. With the use of the software PDEMOD (Partial Differential Equation Model), it is now possible to optimize structure and control systems simultaneously. The distributed parameter modeling approach enables embedding the control system dynamics into the same equations for the structural dynamics model. By doing this, the current difficulties involved in model order reduction are avoided. The NASA Mini-MAST truss is used an an example for studying integrated control structure design.

What does it mean to manage sky survey data? A model to facilitate stakeholder conversations

NASA Astrophysics Data System (ADS)

Sands, Ashley E.; Darch, Peter T.

2016-06-01

Astronomy sky surveys, while of great scientific value independently, can be deployed even more effectively when multiple sources of data are combined. Integrating discrete datasets is a non-trivial exercise despite investments in standard data formats and tools. Creating and maintaining data and associated infrastructures requires investments in technology and expertise. Combining data from multiple sources necessitates a common understanding of data, structures, and goals amongst relevant stakeholders.We present a model of Astronomy Stakeholder Perspectives on Data. The model is based on 80 semi-structured interviews with astronomers, computational astronomers, computer scientists, and others involved in the building or use of the Sloan Digital Sky Survey (SDSS) and Large Synoptic Survey Telescope (LSST). Interviewees were selected to ensure a range of roles, institutional affiliations, career stages, and level of astronomy education. Interviewee explanations of data were analyzed to understand how perspectives on astronomy data varied by stakeholder.Interviewees described sky survey data either intrinsically or extrinsically. “Intrinsic” descriptions of data refer to data as an object in and of itself. Respondents with intrinsic perspectives view data management in one of three ways: (1) “Medium” - securing the zeros and ones from bit rot; (2) “Scale” - assuring that changes in state are documented; or (3) “Content” - ensuring the scientific validity of the images, spectra, and catalogs.“Extrinsic” definitions, in contrast, define data in relation to other forms of information. Respondents with extrinsic perspectives view data management in one of three ways: (1) “Source” - supporting the integrity of the instruments and documentation; (2) “Relationship” - retaining relationships between data and their analytical byproducts; or (3) “Use” - ensuring that data remain scientifically usable.This model shows how data management can mean different things to different stakeholders at different times. The model is valuable to those who build and maintain infrastructures because it can be used as a tool to facilitate recognition, understanding, and thus communication between relevant astronomy data stakeholders.

Block-Level Added Redundancy Explicit Authentication for Parallelized Encryption and Integrity Checking of Processor-Memory Transactions

NASA Astrophysics Data System (ADS)

Elbaz, Reouven; Torres, Lionel; Sassatelli, Gilles; Guillemin, Pierre; Bardouillet, Michel; Martinez, Albert

The bus between the System on Chip (SoC) and the external memory is one of the weakest points of computer systems: an adversary can easily probe this bus in order to read private data (data confidentiality concern) or to inject data (data integrity concern). The conventional way to protect data against such attacks and to ensure data confidentiality and integrity is to implement two dedicated engines: one performing data encryption and another data authentication. This approach, while secure, prevents parallelizability of the underlying computations. In this paper, we introduce the concept of Block-Level Added Redundancy Explicit Authentication (BL-AREA) and we describe a Parallelized Encryption and Integrity Checking Engine (PE-ICE) based on this concept. BL-AREA and PE-ICE have been designed to provide an effective solution to ensure both security services while allowing for full parallelization on processor read and write operations and optimizing the hardware resources. Compared to standard encryption which ensures only confidentiality, we show that PE-ICE additionally guarantees code and data integrity for less than 4% of run-time performance overhead.

Rapid assessment of the antigenic integrity of tetrameric HLA complexes by human monoclonal HLA antibodies.

PubMed

Eijsink, Chantal; Kester, Michel G D; Franke, Marry E I; Franken, Kees L M C; Heemskerk, Mirjam H M; Claas, Frans H J; Mulder, Arend

2006-08-31

The ability of tetrameric major histocompatibility complex (MHC) class I-peptide complexes (tetramers) to detect antigen-specific T lymphocyte responses has yielded significant information about the generation of in vivo immunity in numerous antigenic systems. Here we present a novel method for rapid validation of tetrameric HLA molecules based on the presence of allodeterminants. Human monoclonal antibodies (mAbs) recognizing polymorphic determinants on HLA class I were immobilized on polystyrene microparticles and used to probe the structural integrity of tetrameric HLA class I molecules by flow cytometry. A total of 22 tetramers, based on HLA-A1, A2, A3, A24, B7 and B8 were reactive with their counterpart mAbs, thus confirming their antigenic integrity. A positive outcome of this mAb test ensures that tetrameric HLA class I can be used with greater confidence in subsequent functional assays.

Multiplex lithography for multilevel multiscale architectures and its application to polymer electrolyte membrane fuel cell

NASA Astrophysics Data System (ADS)

Cho, Hyesung; Moon Kim, Sang; Sik Kang, Yun; Kim, Junsoo; Jang, Segeun; Kim, Minhyoung; Park, Hyunchul; Won Bang, Jung; Seo, Soonmin; Suh, Kahp-Yang; Sung, Yung-Eun; Choi, Mansoo

2015-09-01

The production of multiscale architectures is of significant interest in materials science, and the integration of those structures could provide a breakthrough for various applications. Here we report a simple yet versatile strategy that allows for the LEGO-like integrations of microscale membranes by quantitatively controlling the oxygen inhibition effects of ultraviolet-curable materials, leading to multilevel multiscale architectures. The spatial control of oxygen concentration induces different curing contrasts in a resin allowing the selective imprinting and bonding at different sides of a membrane, which enables LEGO-like integration together with the multiscale pattern formation. Utilizing the method, the multilevel multiscale Nafion membranes are prepared and applied to polymer electrolyte membrane fuel cell. Our multiscale membrane fuel cell demonstrates significant enhancement of performance while ensuring mechanical robustness. The performance enhancement is caused by the combined effect of the decrease of membrane resistance and the increase of the electrochemical active surface area.

Determinants of sustainability in solid waste management - The Gianyar Waste Recovery Project in Indonesia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zurbruegg, Christian, E-mail: zurbrugg@eawag.ch; Gfrerer, Margareth, E-mail: margareth.gfrerer@gmx.net; Ashadi, Henki, E-mail: henki@eng.ui.ac.id

2012-11-15

Highlights: Black-Right-Pointing-Pointer Our assessment tool helps evaluate success factors in solid waste projects. Black-Right-Pointing-Pointer Success of the composting plant in Indonesia is linked to its community integration. Black-Right-Pointing-Pointer Appropriate technology is not a main determining success factor for sustainability. Black-Right-Pointing-Pointer Structured assessment of 'best practices' can enhance replication in other cities. - Abstract: According to most experts, integrated and sustainable solid waste management should not only be given top priority, but must go beyond technical aspects to include various key elements of sustainability to ensure success of any solid waste project. Aside from project sustainable impacts, the overall enabling environmentmore » is the key feature determining performance and success of an integrated and affordable solid waste system. This paper describes a project-specific approach to assess typical success or failure factors. A questionnaire-based assessment method covers issues of: (i) social mobilisation and acceptance (social element), (ii) stakeholder, legal and institutional arrangements comprising roles, responsibilities and management functions (institutional element); (iii) financial and operational requirements, as well as cost recovery mechanisms (economic element). The Gianyar Waste Recovery Project in Bali, Indonesia was analysed using this integrated assessment method. The results clearly identified chief characteristics, key factors to consider when planning country wide replication but also major barriers and obstacles which must be overcome to ensure project sustainability. The Gianyar project consists of a composting unit processing 60 tons of municipal waste per day from 500,000 inhabitants, including manual waste segregation and subsequent composting of the biodegradable organic fraction.« less

Structural Design for a Neptune Aerocapture Mission

NASA Technical Reports Server (NTRS)

Dyke, R. Eric; Hrinda, Glenn A.

2004-01-01

A multi-center study was conducted in 2003 to assess the feasibility of and technology requirements for using aerocapture to insert a scientific platform into orbit around Neptune. The aerocapture technique offers a potential method of greatly reducing orbiter mass and thus total spacecraft launch mass by minimizing the required propulsion system mass. This study involved the collaborative efforts of personnel from Langley Research Center (LaRC), Johnson Space Flight Center (JSFC), Marshall Space Flight Center (MSFC), Ames Research Center (ARC), and the Jet Propulsion Laboratory (JPL). One aspect of this effort was the structural design of the full spacecraft configuration, including the ellipsled aerocapture orbiter and the in-space solar electric propulsion (SEP) module/cruise stage. This paper will discuss the functional and structural requirements for each of these components, some of the design trades leading to the final configuration, the loading environments, and the analysis methods used to ensure structural integrity. It will also highlight the design and structural challenges faced while trying to integrate all the mission requirements. Component sizes, materials, construction methods and analytical results, including masses and natural frequencies, will be presented, showing the feasibility of the resulting design for use in a Neptune aerocapture mission. Lastly, results of a post-study structural mass optimization effort on the ellipsled will be discussed, showing potential mass savings and their influence on structural strength and stiffness

Design and fabrication of integrated micro/macrostructure for 3D functional gradient systems based on additive manufacturing

NASA Astrophysics Data System (ADS)

Yin, Ming; Xie, Luofeng; Jiang, Weifeng; Yin, Guofu

2018-05-01

Functional gradient systems have important applications in many areas. Although a 2D dielectric structure that serves as the gradient index medium for controlling electromagnetic waves is well established, it may not be suitable for application in 3D case. In this paper, we present a method to realize functional gradient systems with 3D integrated micro/macrostructure. The homogenization of the structure is studied in detail by conducting band diagram analysis. The analysis shows that the effective medium approximation is valid even when periodicity is comparable to wavelength. The condition to ensure the polarization-invariant, isotropic, and frequency-independent property is investigated. The scheme for the design and fabrication of 3D systems requiring spatial material property distribution is presented. By using the vat photopolymerization process, a large overall size of macrostructure at the system level and precise fine features of microstructure at the unit cell level are realized, thus demonstrating considerable scalability of the system for wave manipulation.

The Living Scar – Cardiac Fibroblasts and the Injured Heart

PubMed Central

Rog-Zielinska, Eva A; Norris, Russell A; Kohl, Peter; Markwald, Roger

2015-01-01

Cardiac scars, often perceived as “dead” tissue, are very much alive, with heterocellular activity ensuring the maintenance of structural and mechanical integrity following heart injury. To form a scar, non-myocytes such as fibroblasts, proliferate and are recruited from intra- and extra-cardiac sources. Fibroblasts perform important autocrine and paracrine signalling functions. They also establish mechanical and, as is increasingly evident, electrical junctions with other cells. While fibroblasts were previously thought to act simply as electrical insulators, they may be electrically connected among themselves and, under certain circumstances, to other cells, including cardiomyocytes. A better understanding of these interactions will help target scar structure and function and facilitate the development of novel therapies aimed at modifying scar properties for patient benefit. This review explores available insight and recent concepts on fibroblast integration in the heart, and highlights potential avenues for harnessing their roles to optimise scar function following heart injury such as infarction, and therapeutic interventions such as ablation. PMID:26776094

Wind turbine power tracking using an improved multimodel quadratic approach.

PubMed

Khezami, Nadhira; Benhadj Braiek, Naceur; Guillaud, Xavier

2010-07-01

In this paper, an improved multimodel optimal quadratic control structure for variable speed, pitch regulated wind turbines (operating at high wind speeds) is proposed in order to integrate high levels of wind power to actively provide a primary reserve for frequency control. On the basis of the nonlinear model of the studied plant, and taking into account the wind speed fluctuations, and the electrical power variation, a multimodel linear description is derived for the wind turbine, and is used for the synthesis of an optimal control law involving a state feedback, an integral action and an output reference model. This new control structure allows a rapid transition of the wind turbine generated power between different desired set values. This electrical power tracking is ensured with a high-performance behavior for all other state variables: turbine and generator rotational speeds and mechanical shaft torque; and smooth and adequate evolution of the control variables. 2010 ISA. Published by Elsevier Ltd. All rights reserved.

A monolithic lead sulfide-silicon MOS integrated-circuit structure

NASA Technical Reports Server (NTRS)

Jhabvala, M. D.; Barrett, J. R.

1982-01-01

A technique is developed for directly integrating infrared photoconductive PbS detector material with MOS transistors. A layer of chromium, instead of aluminum, is deposited followed by a gold deposition in order to ensure device survival during the chemical deposition of the PbS. Among other devices, a structure was fabricated and evaluated in which the PbS was directly coupled to the gate of a PMOS. The external bias, load, and source resistors were connected and the circuit was operated as a source-follower amplifier. Radiometric evaluations were performed on a variety of different MOSFETs of different geometry. In addition, various detector elements were simultaneously fabricated to demonstrate small element capability, and it was shown that elements of 25 x 25 microns could easily be fabricated. Results of room temperature evaluations using a filtered 700 K black body source yielded a detectivity at peak wavelength of 10 to the 11th cm (root Hz)/W at 100 Hz chopping frequency.

The Demand for Antiretroviral Drugs in the Illicit Marketplace: Implications for HIV disease management among vulnerable populations

PubMed Central

Tsuyuki, Kiyomi; Surratt, Hilary L.; Levi-Minzi, Maria A.; O’Grady, Catherine L.; Kurtz, Steven P.

2014-01-01

The diversion of antiretroviral medications (ARVs) has implications for the integrity and success of HIV care, however little is known about the ARV illicit market. This paper aimed to identify the motivations for buying illicit ARVs and to describe market dynamics. Semi-structured interviews (n=44) were conducted with substance-involved individuals living with HIV with a history of purchasing ARVs on the street. Grounded theory was used to code and analyze interviews. Motivations for buying ARVs on the illicit market were: to repurchase ARVs after having diverted them for money or drugs; having limited access or low quality health care; to replace lost or ruined ARVs; and to buy a back-up stock of ARVs. This study identified various structural barriers to HIV treatment and ARV adherence that incentivized ARV diversion. Findings highlight the need to improve patient-provider relationships, ensure continuity of care, and integrate services to engage and retain high-needs populations. PMID:25092512

The Demand for Antiretroviral Drugs in the Illicit Marketplace: Implications for HIV Disease Management Among Vulnerable Populations.

PubMed

Tsuyuki, Kiyomi; Surratt, Hilary L; Levi-Minzi, Maria A; O'Grady, Catherine L; Kurtz, Steven P

2015-05-01

The diversion of antiretroviral medications (ARVs) has implications for the integrity and success of HIV care, however little is known about the ARV illicit market. This paper aimed to identify the motivations for buying illicit ARVs and to describe market dynamics. Semi-structured interviews (n = 44) were conducted with substance-involved individuals living with HIV who have a history of purchasing ARVs on the street. Grounded theory was used to code and analyze interviews. Motivations for buying ARVs on the illicit market were: to repurchase ARVs after having diverted them for money or drugs; having limited access or low quality health care; to replace lost or ruined ARVs; and to buy a back-up stock of ARVs. This study identified various structural barriers to HIV treatment and ARV adherence that incentivized ARV diversion. Findings highlight the need to improve patient-provider relationships, ensure continuity of care, and integrate services to engage and retain high-needs populations.

77 FR 28863 - Commission Information Collection Activities (FERC-915); Comment Request; Extension

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-16

... under section 205 of the Federal Power Act (FPA) to ensure that wholesale sales of electricity are just... maintained by the respondents under FERC-915 to monitor the entities' sales, ensure that the prices are just and reasonable, maintain the integrity of the wholesale jurisdictional sales markets, and ensure that...

Risk mitigation of shared electronic records system in campus institutions: medical social work practice in singapore.

PubMed

Ow Yong, Lai Meng; Tan, Amanda Wei Li; Loo, Cecilia Lay Keng; Lim, Esther Li Ping

2014-10-01

In 2013, the Singapore General Hospital (SGH) Campus initiated a shared electronic system where patient records and documentations were standardized and shared across institutions within the Campus. The project was initiated to enhance quality of health care, improve accessibility, and ensure integrated (as opposed to fragmented) care for best outcomes in our patients. In mitigating the risks of ICT, it was found that familiarity with guiding ethical principles, and ensuring adherence to regulatory and technical competencies in medical social work were important. The need to negotiate and maneuver in a large environment within the Campus to ensure proactive integrative process helped.

Genetic Interaction Maps in Escherichia coli Reveal Functional Crosstalk among Cell Envelope Biogenesis Pathways

PubMed Central

Vlasblom, James; Gagarinova, Alla; Phanse, Sadhna; Graham, Chris; Yousif, Fouad; Ding, Huiming; Xiong, Xuejian; Nazarians-Armavil, Anaies; Alamgir, Md; Ali, Mehrab; Pogoutse, Oxana; Pe'er, Asaf; Arnold, Roland; Michaut, Magali; Parkinson, John; Golshani, Ashkan; Whitfield, Chris; Wodak, Shoshana J.; Moreno-Hagelsieb, Gabriel; Greenblatt, Jack F.; Emili, Andrew

2011-01-01

As the interface between a microbe and its environment, the bacterial cell envelope has broad biological and clinical significance. While numerous biosynthesis genes and pathways have been identified and studied in isolation, how these intersect functionally to ensure envelope integrity during adaptive responses to environmental challenge remains unclear. To this end, we performed high-density synthetic genetic screens to generate quantitative functional association maps encompassing virtually the entire cell envelope biosynthetic machinery of Escherichia coli under both auxotrophic (rich medium) and prototrophic (minimal medium) culture conditions. The differential patterns of genetic interactions detected among >235,000 digenic mutant combinations tested reveal unexpected condition-specific functional crosstalk and genetic backup mechanisms that ensure stress-resistant envelope assembly and maintenance. These networks also provide insights into the global systems connectivity and dynamic functional reorganization of a universal bacterial structure that is both broadly conserved among eubacteria (including pathogens) and an important target. PMID:22125496

Bottom-up nanoconstruction by the welding of individual metallic nanoobjects using nanoscale solder.

PubMed

Peng, Yong; Cullis, Tony; Inkson, Beverley

2009-01-01

We report that individual metallic nanowires and nanoobjects can be assembled and welded together into complex nanostructures and conductive circuits by a new nanoscale electrical welding technique using nanovolumes of metal solder. At the weld sites, nanoscale volumes of a chosen metal are deposited using a sacrificial nanowire, which ensures that the nanoobjects to be bonded retain their structural integrity. We demonstrate by welding both similar and dissimilar materials that the use of nanoscale solder is clean, controllable, and reliable and ensures both mechanically strong and electrically conductive contacts. Nanoscale weld resistances of just 20Omega are achieved by using Sn solder. Precise engineering of nanowelds by this technique, including the chemical flexibility of the nanowire solder, and high spatial resolution of the nanowelding method, should result in research applications including fabrication of nanosensors and nanoelectronics constructed from a small number of nanoobjects, and repair of interconnects and failed nanoscale electronics.

Building sustainable community partnerships into the structure of new academic public health schools and programs.

PubMed

Gaughan, Monica; Gillman, Laura B; Boumbulian, Paul; Davis, Marsha; Galen, Robert S

2011-01-01

We describe and assess how the College of Public Health at the University of Georgia, established in 2005, has developed formal institutional mechanisms to facilitate community-university partnerships that serve the needs of communities and the university. The College developed these partnerships as part of its founding; therefore, the University of Georgia model may serve as an important model for other new public health programs. One important lesson is the need to develop financial and organizational mechanisms that ensure stability over time. Equally important is attention to how community needs can be addressed by faculty and students in academically appropriate ways. The integration of these 2 lessons ensures that the academic mission is fulfilled at the same time that community needs are addressed. Together, these lessons suggest that multiple formal strategies are warranted in the development of academically appropriate and sustainable university-community partnerships.

A 'systems' approach to suicide prevention: radical change or doing the same things better?

PubMed

Fitzpatrick, Scott J; Hooker, Claire

2017-04-27

Suicide is a significant public health concern. Continued high suicide rates, coupled with emerging international evidence, have led to the development of a 'systems' approach to suicide prevention, which is now being trialled as part of a proposed Suicide Prevention Framework for NSW (New South Wales, Australia). The Framework replicates successful international approaches. It is organised around nine components, ranging from individual to population-level approaches, to improve coordination and integration of existing services. If implemented fully, the Framework may lead to a significant reduction in suicide. However, to ensure its long-term success, we must attend to underlying structures within the system and their interrelationships. Such an approach will also ensure that policy makers and local suicide prevention action groups, particularly in rural areas, are able to respond to local challenges and incorporate multiple perspectives into their practice, including evidence for the broader social determinants of suicide.

Genetic interaction maps in Escherichia coli reveal functional crosstalk among cell envelope biogenesis pathways.

PubMed

Babu, Mohan; Díaz-Mejía, J Javier; Vlasblom, James; Gagarinova, Alla; Phanse, Sadhna; Graham, Chris; Yousif, Fouad; Ding, Huiming; Xiong, Xuejian; Nazarians-Armavil, Anaies; Alamgir, Md; Ali, Mehrab; Pogoutse, Oxana; Pe'er, Asaf; Arnold, Roland; Michaut, Magali; Parkinson, John; Golshani, Ashkan; Whitfield, Chris; Wodak, Shoshana J; Moreno-Hagelsieb, Gabriel; Greenblatt, Jack F; Emili, Andrew

2011-11-01

As the interface between a microbe and its environment, the bacterial cell envelope has broad biological and clinical significance. While numerous biosynthesis genes and pathways have been identified and studied in isolation, how these intersect functionally to ensure envelope integrity during adaptive responses to environmental challenge remains unclear. To this end, we performed high-density synthetic genetic screens to generate quantitative functional association maps encompassing virtually the entire cell envelope biosynthetic machinery of Escherichia coli under both auxotrophic (rich medium) and prototrophic (minimal medium) culture conditions. The differential patterns of genetic interactions detected among > 235,000 digenic mutant combinations tested reveal unexpected condition-specific functional crosstalk and genetic backup mechanisms that ensure stress-resistant envelope assembly and maintenance. These networks also provide insights into the global systems connectivity and dynamic functional reorganization of a universal bacterial structure that is both broadly conserved among eubacteria (including pathogens) and an important target.

Structure and practices of the video relay service program; telecommunications relay services and speech-to-speech services for individuals with hearing and speech disabilities. Final rule.

PubMed

2013-07-05

In this document, the Commission adopts further measures to improve the structure, efficiency, and quality of the video relay service (VRS) program, reducing the inefficiencies in the program, as well as reducing the risk of waste, fraud, and abuse, and ensuring that the program makes full use of advances in commercially-available technology. These measures involve a fundamental restructuring of the program to support innovation and competition, drive down ratepayer and provider costs, eliminate incentives for waste that have burdened the Telecommunications Relay Services (TRS) Fund in the past, and further protect consumers. The Commission adopts several measures in order to: ensure that VRS users can easily select their provider of choice by promoting the development of interoperability and portability standards; enable consumers to use off-the-shelf devices and deploying a VRS application to work with these devices; create a centralized TRS User Registration Database to ensure VRS user eligibility; encourage competition and innovation in VRS call handling services; spur research and development on VRS services by entering into a Memorandum of Understanding with the National Science Foundation; and pilot a National Outreach Program to educate the general public about relay services. In this document, the Commission also adopts new VRS compensation rates that move these rates toward actual costs over the next four years which will better approximate the actual, reasonable costs of providing VRS, and will reduce the costs of operating the program. The Commission takes these steps to ensure the integrity of the TRS Fund while providing stability and certainty to providers.

Multi-attribute integrated measurement of node importance in complex networks.

PubMed

Wang, Shibo; Zhao, Jinlou

2015-11-01

The measure of node importance in complex networks is very important to the research of networks stability and robustness; it also can ensure the security of the whole network. Most researchers have used a single indicator to measure the networks node importance, so that the obtained measurement results only reflect certain aspects of the networks with a loss of information. Meanwhile, because of the difference of networks topology, the nodes' importance should be described by combining the character of the networks topology. Most of the existing evaluation algorithms cannot completely reflect the circumstances of complex networks, so this paper takes into account the degree of centrality, the relative closeness centrality, clustering coefficient, and topology potential and raises an integrated measuring method to measure the nodes' importance. This method can reflect nodes' internal and outside attributes and eliminate the influence of network structure on the node importance. The experiments of karate network and dolphin network show that networks topology structure integrated measure has smaller range of metrical result than a single indicator and more universal. Experiments show that attacking the North American power grid and the Internet network with the method has a faster convergence speed than other methods.

Resonant coupling into hybrid 3D micro-resonator devices on organic/biomolecular film/glass photonic structures

NASA Astrophysics Data System (ADS)

Bêche, Bruno; Potel, Arnaud; Barbe, Jérémy; Vié, Véronique; Zyss, Joseph; Godet, Christian; Huby, Nolwenn; Pluchon, David; Gaviot, Etienne

2010-01-01

We have designed and realized an integrated photonic family of micro-resonators (MR) on multilayer SU8/lipidic film/glass materials. Such a family involves hybrid 3D-MR structures composed of spherical glass-MR arranged upon organic pair-SU8-waveguides, an efficient coupling being ensured with a Langmuir-Blodgett Dipalmitoylphosphatidylcholine (DPPC-lipid from Avanti Polar ®) film whose thickness is ranging from 12 to 48 nm. We have characterized such add/drop filters, respectively, in intensity and spectral measurements, and experimentally achieved an evanescent resonant-photonic-coupling between the 3D-MR and the 4-ports structure through the DPPC-gap. Spectral resonances have been measured for 4-whispering gallery-modes (WGM) into such 3D-structures, respectively, characterized with a 0.97 nm free spectral range (FSR) and a high quality Q-factor up to 4.10 4.

[Managing a health research institute: towards research excellence through continuous improvement].

PubMed

Olmedo, Carmen; Buño, Ismael; Plá, Rosa; Lomba, Irene; Bardinet, Thierry; Bañares, Rafael

2015-01-01

Health research institutes are a strategic commitment considered the ideal environment to develop excellence in translational research. Achieving quality research requires not only a powerful scientific and research structure but also the quality and integrity of management systems that support it. The essential instruments in our institution were solid strategic planning integrated into and consistent with the system of quality management, systematic evaluation through periodic indicators, measurement of key user satisfaction and internal audits, and implementation of an innovative information management tool. The implemented management tools have provided a strategic thrust to our institute while ensuring a level of quality and efficiency in the development and management of research that allows progress towards excellence in biomedical research. Copyright © 2015 SESPAS. Published by Elsevier Espana. All rights reserved.

Next level of board accountability in health care quality.

PubMed

Pronovost, Peter J; Armstrong, C Michael; Demski, Renee; Peterson, Ronald R; Rothman, Paul B

2018-03-19

Purpose The purpose of this paper is to offer six principles that health system leaders can apply to establish a governance and management system for the quality of care and patient safety. Design/methodology/approach Leaders of a large academic health system set a goal of high reliability and formed a quality board committee in 2011 to oversee quality and patient safety everywhere care was delivered. Leaders of the health system and every entity, including inpatient hospitals, home care companies, and ambulatory services staff the committee. The committee works with the management for each entity to set and achieve quality goals. Through this work, the six principles emerged to address management structures and processes. Findings The principles are: ensure there is oversight for quality everywhere care is delivered under the health system; create a framework to organize and report the work; identify care areas where quality is ambiguous or underdeveloped (i.e. islands of quality) and work to ensure there is reporting and accountability for quality measures; create a consolidated quality statement similar to a financial statement; ensure the integrity of the data used to measure and report quality and safety performance; and transparently report performance and create an explicit accountability model. Originality/value This governance and management system for quality and safety functions similar to a finance system, with quality performance documented and reported, data integrity monitored, and accountability for performance from board to bedside. To the authors' knowledge, this is the first description of how a board has taken this type of systematic approach to oversee the quality of care.

Experimental investigation on frequency shifting of imperfect adhesively bonded pipe joints

NASA Astrophysics Data System (ADS)

Haiyam, F. N.; Hilmy, I.; Sulaeman, E.; Firdaus, T.; Adesta, E. Y. T.

2018-01-01

Inspection tests for any manufactured structure are compulsory in order to detect the existence of damage.It is to ensure the product integrity, reliability and to avoid further catastrophic failure. In this research, modal analysis was utilized to detect structural damage as one of the Non Destructive Testing (NDT) methods. Comparing the vibration signal of a healthy structure with a non-healthy signal was performed. A modal analysis of an adhesively bonded pipe joint was investigated with a healthy joint as a reference. The damage joint was engineered by inserting a nylon fiber, which act as an impurity at adhesive region. The impact test using hammer was utilized in this research. Identification of shifting frequency of a free supported and clamped pipe joint was performed.It was found that shifting frequency occurred to the lower side by 5%.

Automatically updating predictive modeling workflows support decision-making in drug design.

PubMed

Muegge, Ingo; Bentzien, Jörg; Mukherjee, Prasenjit; Hughes, Robert O

2016-09-01

Using predictive models for early decision-making in drug discovery has become standard practice. We suggest that model building needs to be automated with minimum input and low technical maintenance requirements. Models perform best when tailored to answering specific compound optimization related questions. If qualitative answers are required, 2-bin classification models are preferred. Integrating predictive modeling results with structural information stimulates better decision making. For in silico models supporting rapid structure-activity relationship cycles the performance deteriorates within weeks. Frequent automated updates of predictive models ensure best predictions. Consensus between multiple modeling approaches increases the prediction confidence. Combining qualified and nonqualified data optimally uses all available information. Dose predictions provide a holistic alternative to multiple individual property predictions for reaching complex decisions.

Digital Image Correlation of Concrete Slab at University of Tennessee, Knoxville

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mahadevan, Sankaran; Agarwal, Vivek; Pham, Binh T.

Assessment and management of aging concrete structures in nuclear power plants require a more systematic approach than simple reliance on existing code margins of safety. Some degradation mechanisms of concrete manifest themselves via swelling or by other shape deformation of the concrete. Specifically, degradation of concrete structure damaged by ASR is viewed as one of the dominant factors impacting the structural integrity of aging nuclear power plants. Structural health monitoring of concrete structures aims to understand the current health condition of a structure based on heterogeneous measurements to produce high-confidence actionable information regarding structural integrity that supports operational and maintenancemore » decisions. Number of nondestructive examination techniques (i.e., thermography, digital image correlation, mechanical deformation measurements, nonlinear impact resonance (DIC) acoustic spectroscopy, and vibro-acoustic modulation) is used to detect the damage caused by ASR. DIC techniques have been increasing in popularity, especially in micro- and nano-scale mechanical testing applications due to its relative ease of implementation and use. Advances in computer technology and digital cameras help this method moving forward. To ensure the best outcome of the DIC system, important factors in the experiment are identified. They include standoff distance, speckle size, speckle pattern, and durable paint. These optimal experimental options are selected basing on a thorough investigation. The resulting DIC deformation map indicates that this technique can be used to generate data related to degradation assessment of concrete structure damaged by the impact of ASR.« less

Canadian National Guidelines and Recommendations for Integrating Career Advising Into Medical School Curricula

PubMed Central

Harris, June; Dalgarno, Nancy

2017-01-01

Career planning, decision making about specialty choice, and preparation for residency matching are significant sources of stress for medical students. Attempts have been made to structure and formalize career advising by including it in accreditation standards. There is an expressed need for national guidelines on career advising for medical students. The Future of Medical Education in Canada Postgraduate (FMEC PG) Implementation Project was created to ensure Canadian medical trainees receive the best education possible. From this, a diverse sub-working group (SWG), representing different Canadian regions, was formed to review career advising processes across the country. The SWG developed, through a modified formal consensus methodology, a strategy for medical student career advising that is adaptable to all schools in alignment with existing accreditation standards. The SWG outlined five guiding principles and five essential elements for Canadian universities offering an MD degree with recommendations on how to integrate the elements into each school’s career advising system. The five essential elements are a structured approach to career advising, information about available career options, elective guidance, preparation for residency applications, and social accountability. This Perspective endorses the view of the FMEC PG Implementation Project that national guidelines are important to ensure Canadian medical schools are consistently meeting accreditation standards by providing reliable and quality career advising to all medical students. The SWG’s position, based on national and provincial feedback, is that these guidelines will stimulate discourse and action regarding the requirements and processes to carry out these recommendations nationwide and share across borders. PMID:28445219

System Engineering of Photonic Systems for Space Application

NASA Technical Reports Server (NTRS)

Watson, Michael D.; Pryor, Jonathan E.

2014-01-01

The application of photonics in space systems requires tight integration with the spacecraft systems to ensure accurate operation. This requires some detailed and specific system engineering to properly incorporate the photonics into the spacecraft architecture and to guide the spacecraft architecture in supporting the photonics devices. Recent research in product focused, elegant system engineering has led to a system approach which provides a robust approach to this integration. Focusing on the mission application and the integration of the spacecraft system physics incorporation of the photonics can be efficiently and effectively accomplished. This requires a clear understanding of the driving physics properties of the photonics device to ensure proper integration with no unintended consequences. The driving physics considerations in terms of optical performance will be identified for their use in system integration. Keywords: System Engineering, Optical Transfer Function, Optical Physics, Photonics, Image Jitter, Launch Vehicle, System Integration, Organizational Interaction

Strategies for the profiling, characterisation and detailed structural analysis of N-linked oligosaccharides.

PubMed

Tharmalingam, Tharmala; Adamczyk, Barbara; Doherty, Margaret A; Royle, Louise; Rudd, Pauline M

2013-02-01

Many post-translational modifications, including glycosylation, are pivotal for the structural integrity, location and functional activity of glycoproteins. Sub-populations of proteins that are relocated or functionally changed by such modifications can change resting proteins into active ones, mediating specific effector functions, as in the case of monoclonal antibodies. To ensure safe and efficacious drugs it is essential to employ appropriate robust, quantitative analytical strategies that can (i) perform detailed glycan structural analysis, (ii) characterise specific subsets of glycans to assess known critical features of therapeutic activities (iii) rapidly profile glycan pools for at-line monitoring or high level batch to batch screening. Here we focus on these aspects of glycan analysis, showing how state-of-the-art technologies are required at all stages during the production of recombinant glycotherapeutics. These data can provide insights into processing pathways and suggest markers for intervention at critical control points in bioprocessing and also critical decision points in disease and drug monitoring in patients. Importantly, these tools are now enabling the first glycome/genome studies in large populations, allowing the integration of glycomics into other 'omics platforms in a systems biology context.

Fostering development of nursing practices to support integrated care when implementing integrated care pathways: what levers to use?

PubMed

Longpré, Caroline; Dubois, Carl-Ardy

2017-11-29

Care integration has been the focus of recent health system reforms. Given their functions at all levels of the care continuum, nurses have a substantial and primordial role to play in such integration processes. The aim of this study was to identify levers and strategies that organizations can use to support the development of a nursing practice aligned with the requirements of care integration in a health and social services centre (HSSC) in Quebec. The research design was a cross-sectional descriptive qualitative study based on a single case study with nested levels of analysis. The case was a public, multi-disciplinary HSSC in a semi-urban region of Quebec. Semi-structured interviews with 37 persons (nurses, professionals, managers, administrators) allowed for data saturation and ensured theoretical representation by covering four care pathways constituting different care integration contexts. Analysis involved four steps: preparing a predetermined list of codes based on the reference framework developed by Minkman (2011); coding transcript content; developing general and summary matrices to group observations for each care pathway; and creating a general model showing the overall results for the four pathways. The organization's capacity for response with regard to developing an integrated system of services resulted in two types of complementary interventions. The first involved investing in key resources and renewing organizational structures; the second involved deploying a series of organizational and clinical-administrative processes. In resource terms, integration efforts resulted in setting up new strategic services, re-arranging physical infrastructures, and deploying new technological resources. Organizational and clinical-administrative processes to promote integration involved renewing governance, improving the flow of care pathways, fostering continuous quality improvement, developing new roles, promoting clinician collaboration, and strengthening care providers' capacities. However, progress in these areas was offset by persistent constraints. The results highlight key levers organizations can use to foster the implementation and institutionalization of integrative nursing practices. They show that progress in this area requires a combination of strategies using multiple complementary levers. They also suggest that such progress calls for rethinking not only the deployment of certain organizational resources and structures, but also a series of organizational and clinical processes.

Integrating Music into the Curriculum: A Recipe for Success.

ERIC Educational Resources Information Center

Thompson, Keith P.

1992-01-01

Because music is an integral part of living, it should be an integral part of school experiences. Music teachers must be deeply involved in instructional planning and delivery. This will happen if administrators ensure that integration means expanding a school's musical offerings, maintaining the integrity of the musical arts, and appropriately…

Drosophila small heat shock protein CryAB ensures structural integrity of developing muscles, and proper muscle and heart performance.

PubMed

Wójtowicz, Inga; Jabłońska, Jadwiga; Zmojdzian, Monika; Taghli-Lamallem, Ouarda; Renaud, Yoan; Junion, Guillaume; Daczewska, Malgorzata; Huelsmann, Sven; Jagla, Krzysztof; Jagla, Teresa

2015-03-01

Molecular chaperones, such as the small heat shock proteins (sHsps), maintain normal cellular function by controlling protein homeostasis in stress conditions. However, sHsps are not only activated in response to environmental insults, but also exert developmental and tissue-specific functions that are much less known. Here, we show that during normal development the Drosophila sHsp CryAB [L(2)efl] is specifically expressed in larval body wall muscles and accumulates at the level of Z-bands and around myonuclei. CryAB features a conserved actin-binding domain and, when attenuated, leads to clustering of myonuclei and an altered pattern of sarcomeric actin and the Z-band-associated actin crosslinker Cheerio (filamin). Our data suggest that CryAB and Cheerio form a complex essential for muscle integrity: CryAB colocalizes with Cheerio and, as revealed by mass spectrometry and co-immunoprecipitation experiments, binds to Cheerio, and the muscle-specific attenuation of cheerio leads to CryAB-like sarcomeric phenotypes. Furthermore, muscle-targeted expression of CryAB(R120G), which carries a mutation associated with desmin-related myopathy (DRM), results in an altered sarcomeric actin pattern, in affected myofibrillar integrity and in Z-band breaks, leading to reduced muscle performance and to marked cardiac arrhythmia. Taken together, we demonstrate that CryAB ensures myofibrillar integrity in Drosophila muscles during development and propose that it does so by interacting with the actin crosslinker Cheerio. The evidence that a DRM-causing mutation affects CryAB muscle function and leads to DRM-like phenotypes in the fly reveals a conserved stress-independent role of CryAB in maintaining muscle cell cytoarchitecture. © 2015. Published by The Company of Biologists Ltd.

Systematic Evaluation Program (SEP) at Rocky Flats Plant: An overview of practical management issues for evaluation of natural phenomena hazards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Badwan, F.M.; Herring, K.S.

1993-08-01

Many of the buildings at the Rocky Flats Plant were designed and built before modern standards were developed, including standards for protection against extreme natural phenomenon such as tornadoes, earthquakes, and floods. The purpose of the SEP is to establish an integrated approach to assessing the design adequacy of specific high and moderate hazard Rocky Flats facilities from a safety perspective and to establish a basis for defining any needed facility improvements. The SEP is to be carried out in three Phases. In Phase 1, topics to be evaluated and an evaluation plan for each topic were developed. Any differencesmore » between Current Design Requirements (CDR) or acceptance criteria and the design of existing facilities, will be identified during Phase 2 and assessed using an integrated systematic approach during Phase 3. The integrated assessment performed during Phase 3 provides a process for evaluating the differences between existing facility design and CDRs so that decisions on corrective actions can be made on the basis of relative risk reduction and cost effectiveness. These efforts will ensure that a balanced and integrated level of safety is achieved for long-term operation of these buildings. Through appropriate selection of topics and identification of the structures, systems, and components to be evaluated, the SEP will address outstanding design issues related to the prevention and mitigation of design basis accidents, including those arising from natural phenomena. The objective of the SEP is not to bring these buildings into strict compliance with current requirements, but rather to ensure that an adequate level of safety is achieved in an economical fashion.« less

On-Field Demonstration Results of Medium Concentration System HSun®

NASA Astrophysics Data System (ADS)

Mendes-Lopes, J.; Pina, L.; Reis, F.; Coelho, S.; Wemans, J.; Sorasio, G.; Pereira, N.

2011-12-01

The paper presents the HSUN®, a new medium concentration photovoltaic (CPV) system, developed and produced by WS Energia S.A. The low cost manufacturing and standard components used by HSUN® technology increases the potential of the system to reach grid parity. The system was designed to have stable performance and low cost manufacturing, with a total active collector area of 1.68 m2 and 6.3 kg/m2 of weight. Based on a 20X integrated parabolic trough with coupled reflective secondary optics, the system uses high efficiency silicon cells, a passive cooling integrated system and is integrated in 1-axis horizontal tracking structure, the WS CPV HORIZON®. The open-chain configuration ensures that the wind drag is greatly reduced, increasing the reliability of the tracker, while the optimized optics design enables a high acceptance angle and uniform distribution of radiation throughout the PV receiver, using low-cost and low-weight components. Ray tracing simulations and experimental imaging acquisitions of the radiation profile were performed and compared, finite element models were used to perform thermal and structural analysis, and a specifically developed model was used to predict the electrical parameters of the receiver as a function of the concentration. All the components that integrate HSUN® technology are produced with machines used in mature industrial sectors thus guarantying mass production and benefiting from economies of scale. The on-field results are presented and discussed.

Targeted gene insertion for molecular medicine.

PubMed

Voigt, Katrin; Izsvák, Zsuzsanna; Ivics, Zoltán

2008-11-01

Genomic insertion of a functional gene together with suitable transcriptional regulatory elements is often required for long-term therapeutical benefit in gene therapy for several genetic diseases. A variety of integrating vectors for gene delivery exist. Some of them exhibit random genomic integration, whereas others have integration preferences based on attributes of the targeted site, such as primary DNA sequence and physical structure of the DNA, or through tethering to certain DNA sequences by host-encoded cellular factors. Uncontrolled genomic insertion bears the risk of the transgene being silenced due to chromosomal position effects, and can lead to genotoxic effects due to mutagenesis of cellular genes. None of the vector systems currently used in either preclinical experiments or clinical trials displays sufficient preferences for target DNA sequences that would ensure appropriate and reliable expression of the transgene and simultaneously prevent hazardous side effects. We review in this paper the advantages and disadvantages of both viral and non-viral gene delivery technologies, discuss mechanisms of target site selection of integrating genetic elements (viruses and transposons), and suggest distinct molecular strategies for targeted gene delivery.

Using two classification schemes to develop vegetation indices of biological integrity for wetlands in West Virginia, USA.

PubMed

Veselka, Walter; Rentch, James S; Grafton, William N; Kordek, Walter S; Anderson, James T

2010-11-01

Bioassessment methods for wetlands, and other bodies of water, have been developed worldwide to measure and quantify changes in "biological integrity." These assessments are based on a classification system, meant to ensure appropriate comparisons between wetland types. Using a local site-specific disturbance gradient, we built vegetation indices of biological integrity (Veg-IBIs) based on two commonly used wetland classification systems in the USA: One based on vegetative structure and the other based on a wetland's position in a landscape and sources of water. The resulting class-specific Veg-IBIs were comprised of 1-5 metrics that varied in their sensitivity to the disturbance gradient (R2=0.14-0.65). Moreover, the sensitivity to the disturbance gradient increased as metrics from each of the two classification schemes were combined (added). Using this information to monitor natural and created wetlands will help natural resource managers track changes in biological integrity of wetlands in response to anthropogenic disturbance and allows the use of vegetative communities to set ecological performance standards for mitigation banks.

Integrating physiotherapists within primary health care teams: perspectives of family physicians and nurse practitioners.

PubMed

Dufour, Sinéad Patricia; Brown, Judith; Deborah Lucy, S

2014-09-01

The international literature suggests a number of benefits related to integrating physiotherapists into primary health care (PHC) teams. Considering the mandate of PHC teams in Canada, emphasizing healthy living and chronic disease management, a broad range of providers, inclusive of physiotherapists is required. However, physiotherapists are only sparsely integrated into these teams. This study explores the perspectives of "core" PHC team members, family physicians and nurse practitioners, regarding the integration of physiotherapists within Ontario (Canada) PHC teams. Twenty individual semi-structured in-depth interviews were conducted, transcribed verbatim, and then analyzed following an iterative process drawing from an interpretive phenomenological approach. Five key themes emerged which highlighted "how physiotherapists could and do contribute as team members within PHC teams particularly related to musculoskeletal health and chronic disease management". The perceived value of physiotherapists within Ontario, Canada PHC teams was a unanimous sentiment particularly in terms of musculoskeletal health, chronic disease management and maximizing health human resources efficiency to ensure the right care, is delivered by the right practitioner, at the right time.

Seven Processes that Enable NASA Software Engineering Technologies

NASA Technical Reports Server (NTRS)

Housch, Helen; Godfrey, Sally

2011-01-01

This slide presentation reviews seven processes that NASA uses to ensure that software is developed, acquired and maintained as specified in the NPR 7150.2A requirement. The requirement is to ensure that all software be appraised for the Capability Maturity Model Integration (CMMI). The enumerated processes are: (7) Product Integration, (6) Configuration Management, (5) Verification, (4) Software Assurance, (3) Measurement and Analysis, (2) Requirements Management and (1) Planning & Monitoring. Each of these is described and the group(s) that are responsible is described.

Biological Cell Identification by Integrating Micro-Fluidics, Electrical Impedance Spectroscopy and Stochastic Estimation

DTIC Science & Technology

2007-03-01

included in Section 3.1.15. 3.1.10 Materials. The choice of materials is important in a micro-�uidic design to ensure biocompatibility , mechanical strength...permanent layer in micro-�uidics. SU-8 has been found to be biocompatible , it is structurally sound and will not breakdown under normal use with water...created using SF-19 polyimide from Micro Chem and AZ5214E from Clariant. The SF-19 layer was 5-7 m in height and the AZ5214E was an additional 1-1.2 m in

New technology planning and approval: critical factors for success.

PubMed

Haselkorn, Ateret; Rosenstein, Alan H; Rao, Anil K; Van Zuiden, Michele; Coye, Molly J

2007-01-01

The steady evolution of technology, with the associated increased costs, is a major factor affecting health care delivery. In the face of limited capital resources, it is important for hospitals to integrate technology management with the strategic plan, mission, and resource availability of the organization. Experiences in technology management have shown that having a well-organized, consistent approach to technology planning, assessment, committee membership, approval, evaluation, implementation, and monitoring are key factors necessary to ensure a successful program. We examined the results of a survey that assessed the structure, processes, and cultural support behind hospital committees for new technology planning and approval.

Reducing Bolt Preload Variation with Angle-of-Twist Bolt Loading

NASA Technical Reports Server (NTRS)

Thompson, Bryce; Nayate, Pramod; Smith, Doug; McCool, Alex (Technical Monitor)

2001-01-01

Critical high-pressure sealing joints on the Space Shuttle reusable solid rocket motor require precise control of bolt preload to ensure proper joint function. As the reusable solid rocket motor experiences rapid internal pressurization, correct bolt preloads maintain the sealing capability and structural integrity of the hardware. The angle-of-twist process provides the right combination of preload accuracy, reliability, process control, and assembly-friendly design. It improves significantly over previous methods. The sophisticated angle-of-twist process controls have yielded answers to all discrepancies encountered while the simplicity of the root process has assured joint preload reliability.

KSC-04pd0965

NASA Image and Video Library

2004-04-28

KENNEDY SPACE CENTER, FLA. - Workers in the Orbiter Processing Facility remove Ground Support Equipment used to install Discovery’s nose cap on Friday. The nose cap had been removed from the vehicle in the summer of 2003 and returned to the vendor, where it underwent numerous forms of Non-Destructive Evaluation. These tests included X-ray, ultrasound and eddy current to ensure its structural integrity prior to installation on the vehicle. The nose cap was also recoated. Once returned to KSC, new Thermal Protection System blankets were assembled inside of the nose cap and thermography was performed prior to installation on the orbiter.

KSC-04pd0964

NASA Image and Video Library

2004-04-28

KENNEDY SPACE CENTER, FLA. - Workers in the Orbiter Processing Facility get ready to remove Ground Support Equipment used to install Discovery’s nose cap on Friday. The nose cap had been removed from the vehicle in the summer of 2003 and returned to the vendor, where it underwent numerous forms of Non-Destructive Evaluation. These tests included X-ray, ultrasound and eddy current to ensure its structural integrity prior to installation on the vehicle. The nose cap was also recoated. Once returned to KSC, new Thermal Protection System blankets were assembled inside of the nose cap and thermography was performed prior to installation on the orbiter.

New Zealand: long-term care in a decade of change.

PubMed

Ashton, T

2000-01-01

Long-term care in New Zealand incorporates a mix of public and private funding and provision. After a decade of structural change, the purchasing of almost all publicly funded health and social care is now the responsibility of one central agency. Services for older persons are poorly integrated, and there are problems of access to and quality of some services. Efforts are being made to address these problems. The challenge now is to ensure that this groundwork is not lost amid the turmoil of yet another round of restructuring by an enthusiastic, newly elected government.

Rethinking policy perspectives on childhood stunting: time to formulate a structural and multifactorial strategy

PubMed Central

Mejía‐Guevara, Iván; Krishna, Aditi

2016-01-01

Abstract Stunting and chronic undernutrition among children in South Asia remain a major unresolved global health issue. There are compelling intrinsic and moral reasons to ensure that children attain their optimal growth potential facilitated via promotion of healthy living conditions. Investments in efforts to ensure that children's growth is not faltered also have substantial instrumental benefits in terms of cognitive and economic development. Using the case of India, we critique three prevailing approaches to reducing undernutrition among children: an over‐reliance on macroeconomic growth as a potent policy instrument, a disproportionate focus on interpreting undernutrition as a demand‐side problem and an over‐reliance on unintegrated single‐factorial (one at a time) approaches to policy and research. Using existing evidence, we develop a case for support‐led policy approach with a focus on integrated and structural factors to addressing the problem of undernutrition among children in India. Key messages Eliminating child undernutrition is important from an intrinsic perspective and offers considerable instrumental benefits to individual and society.Evidence suggests that an exclusive reliance on a growth‐mediated strategy to eliminate stunting needs to be reconsidered, suggesting the need for a substantial support‐led strategy.Interpreting and addressing undernutrition as a demand‐side problem with proximal single‐factorial interventions is futile.There is an urgent need to develop interventions that address the broader structural and upstream causes of child undernutrition. PMID:27187918

49 CFR 1106.1 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-10-01

... TRANSPORTATION RULES OF PRACTICE PROCEDURES FOR SURFACE TRANSPORTATION BOARD CONSIDERATION OF SAFETY INTEGRATION.... This part is designed to ensure adequate and coordinated consideration of safety integration issues, by... integration plans in connection with its approval and authorization of transactions for which the Board has...

Selected technologies for integration of the ALADIN transmitreceive optics (TRO)

NASA Astrophysics Data System (ADS)

Bittner, Hermann; Mosebach, Herbert; Sang, Bernhard; Erhard, Markus; Hilbrand, Bernhard; Mazuray, Laurent; Thibault, Dominique

2017-11-01

Selected technologies for the integration of the TRANSMIT/RECEIVE OPTICS (TRO) are presented. One of the challenging characteristics of the TRO is its stringent requirement on opto-mechanical stability. The stability performance of the TRO must be ensured for the relevant interface environments (thermal, structural) over the 3 years mission lifetime. Comprehensive analyses have been conducted, which have confirmed the need for the development of special integration technologies. Also, dedicated test equipment has been developed to precisely verify the TRO's optomechanical stability. Another important feature of the TRO is its exposure to the high power laser beam of the ADALIN instrument. The corresponding optical elements and their mounts must survive exposure to light intensities up to the required laser-induced damage thresholds (LIDT). Two types of adhesives for gluing of the TRO optics have been selected. Their qualification w.r.t. outgassing was necessary since LIDT's of optical surfaces are significantly reduced when organic outgassing products are deposited there.

Variational discretization of the nonequilibrium thermodynamics of simple systems

NASA Astrophysics Data System (ADS)

Gay-Balmaz, François; Yoshimura, Hiroaki

2018-04-01

In this paper, we develop variational integrators for the nonequilibrium thermodynamics of simple closed systems. These integrators are obtained by a discretization of the Lagrangian variational formulation of nonequilibrium thermodynamics developed in (Gay-Balmaz and Yoshimura 2017a J. Geom. Phys. part I 111 169–93 Gay-Balmaz and Yoshimura 2017b J. Geom. Phys. part II 111 194–212) and thus extend the variational integrators of Lagrangian mechanics, to include irreversible processes. In the continuous setting, we derive the structure preserving property of the flow of such systems. This property is an extension of the symplectic property of the flow of the Euler–Lagrange equations. In the discrete setting, we show that the discrete flow solution of our numerical scheme verifies a discrete version of this property. We also present the regularity conditions which ensure the existence of the discrete flow. We finally illustrate our discrete variational schemes with the implementation of an example of a simple and closed system.

SFINX-a drug-drug interaction database designed for clinical decision support systems.

PubMed

Böttiger, Ylva; Laine, Kari; Andersson, Marine L; Korhonen, Tuomas; Molin, Björn; Ovesjö, Marie-Louise; Tirkkonen, Tuire; Rane, Anders; Gustafsson, Lars L; Eiermann, Birgit

2009-06-01

The aim was to develop a drug-drug interaction database (SFINX) to be integrated into decision support systems or to be used in website solutions for clinical evaluation of interactions. Key elements such as substance properties and names, drug formulations, text structures and references were defined before development of the database. Standard operating procedures for literature searches, text writing rules and a classification system for clinical relevance and documentation level were determined. ATC codes, CAS numbers and country-specific codes for substances were identified and quality assured to ensure safe integration of SFINX into other data systems. Much effort was put into giving short and practical advice regarding clinically relevant drug-drug interactions. SFINX includes over 8,000 interaction pairs and is integrated into Swedish and Finnish computerised decision support systems. Over 31,000 physicians and pharmacists are receiving interaction alerts through SFINX. User feedback is collected for continuous improvement of the content. SFINX is a potentially valuable tool delivering instant information on drug interactions during prescribing and dispensing.

Multiplex lithography for multilevel multiscale architectures and its application to polymer electrolyte membrane fuel cell

PubMed Central

Cho, Hyesung; Moon Kim, Sang; Sik Kang, Yun; Kim, Junsoo; Jang, Segeun; Kim, Minhyoung; Park, Hyunchul; Won Bang, Jung; Seo, Soonmin; Suh, Kahp-Yang; Sung, Yung-Eun; Choi, Mansoo

2015-01-01

The production of multiscale architectures is of significant interest in materials science, and the integration of those structures could provide a breakthrough for various applications. Here we report a simple yet versatile strategy that allows for the LEGO-like integrations of microscale membranes by quantitatively controlling the oxygen inhibition effects of ultraviolet-curable materials, leading to multilevel multiscale architectures. The spatial control of oxygen concentration induces different curing contrasts in a resin allowing the selective imprinting and bonding at different sides of a membrane, which enables LEGO-like integration together with the multiscale pattern formation. Utilizing the method, the multilevel multiscale Nafion membranes are prepared and applied to polymer electrolyte membrane fuel cell. Our multiscale membrane fuel cell demonstrates significant enhancement of performance while ensuring mechanical robustness. The performance enhancement is caused by the combined effect of the decrease of membrane resistance and the increase of the electrochemical active surface area. PMID:26412619

STAR Algorithm Integration Team - Facilitating operational algorithm development

NASA Astrophysics Data System (ADS)

Mikles, V. J.

2015-12-01

The NOAA/NESDIS Center for Satellite Research and Applications (STAR) provides technical support of the Joint Polar Satellite System (JPSS) algorithm development and integration tasks. Utilizing data from the S-NPP satellite, JPSS generates over thirty Environmental Data Records (EDRs) and Intermediate Products (IPs) spanning atmospheric, ocean, cryosphere, and land weather disciplines. The Algorithm Integration Team (AIT) brings technical expertise and support to product algorithms, specifically in testing and validating science algorithms in a pre-operational environment. The AIT verifies that new and updated algorithms function in the development environment, enforces established software development standards, and ensures that delivered packages are functional and complete. AIT facilitates the development of new JPSS-1 algorithms by implementing a review approach based on the Enterprise Product Lifecycle (EPL) process. Building on relationships established during the S-NPP algorithm development process and coordinating directly with science algorithm developers, the AIT has implemented structured reviews with self-contained document suites. The process has supported algorithm improvements for products such as ozone, active fire, vegetation index, and temperature and moisture profiles.

Teaching structure: student use of software tools for understanding macromolecular structure in an undergraduate biochemistry course.

PubMed

Jaswal, Sheila S; O'Hara, Patricia B; Williamson, Patrick L; Springer, Amy L

2013-01-01

Because understanding the structure of biological macromolecules is critical to understanding their function, students of biochemistry should become familiar not only with viewing, but also with generating and manipulating structural representations. We report a strategy from a one-semester undergraduate biochemistry course to integrate use of structural representation tools into both laboratory and homework activities. First, early in the course we introduce the use of readily available open-source software for visualizing protein structure, coincident with modules on amino acid and peptide bond properties. Second, we use these same software tools in lectures and incorporate images and other structure representations in homework tasks. Third, we require a capstone project in which teams of students examine a protein-nucleic acid complex and then use the software tools to illustrate for their classmates the salient features of the structure, relating how the structure helps explain biological function. To ensure engagement with a range of software and database features, we generated a detailed template file that can be used to explore any structure, and that guides students through specific applications of many of the software tools. In presentations, students demonstrate that they are successfully interpreting structural information, and using representations to illustrate particular points relevant to function. Thus, over the semester students integrate information about structural features of biological macromolecules into the larger discussion of the chemical basis of function. Together these assignments provide an accessible introduction to structural representation tools, allowing students to add these methods to their biochemical toolboxes early in their scientific development. © 2013 by The International Union of Biochemistry and Molecular Biology.

New Tools Being Developed for Engine- Airframe Blade-Out Structural Simulations

NASA Technical Reports Server (NTRS)

Lawrence, Charles

2003-01-01

One of the primary concerns of aircraft structure designers is the accurate simulation of the blade-out event. This is required for the aircraft to pass Federal Aviation Administration (FAA) certification and to ensure that the aircraft is safe for operation. Typically, the most severe blade-out occurs when a first-stage fan blade in a high-bypass gas turbine engine is released. Structural loading results from both the impact of the blade onto the containment ring and the subsequent instantaneous unbalance of the rotating components. Reliable simulations of blade-out are required to ensure structural integrity during flight as well as to guarantee successful blade-out certification testing. The loads generated by these analyses are critical to the design teams for several components of the airplane structures including the engine, nacelle, strut, and wing, as well as the aircraft fuselage. Currently, a collection of simulation tools is used for aircraft structural design. Detailed high-fidelity simulation tools are used to capture the structural loads resulting from blade loss, and then these loads are used as input into an overall system model that includes complete structural models of both the engines and the airframe. The detailed simulation (shown in the figure) includes the time-dependent trajectory of the lost blade and its interactions with the containment structure, and the system simulation includes the lost blade loadings and the interactions between the rotating turbomachinery and the remaining aircraft structural components. General-purpose finite element structural analysis codes are typically used, and special provisions are made to include transient effects from the blade loss and rotational effects resulting from the engine s turbomachinery. To develop and validate these new tools with test data, the NASA Glenn Research Center has teamed with GE Aircraft Engines, Pratt & Whitney, Boeing Commercial Aircraft, Rolls-Royce, and MSC.Software.

Integrating health promotion and disease prevention interventions with vaccination in Honduras.

PubMed

Molina-Aguilera, Ida Berenice; Mendoza-Rodríguez, Lourdes Otilia; Palma-Ríos, María Aparicia; Danovaro-Holliday, M Carolina

2012-03-01

We sought to review and describe health interventions integrated with immunization delivery, both routine and during national vaccination weeks, in Honduras between 1991 and 2009. We compiled and examined all annual evaluation reports from the national Expanded Program on Immunization and reports from the national vaccination weeks (NVWs) between 1988 and 2009. We held discussions with the persons responsible for immunization and other programs in the Health Secretary of Honduras for the same time period. Since 1991, several health promotion and disease prevention interventions have been integrated with immunization delivery, including vitamin A supplementation (since 1994), folic acid supplementation (2003), early detection of retinoblastoma (since 2003), breastfeeding promotion (2007-2008), and disease control activities during public health emergencies, such as cholera control (1991-1992) and dengue control activities (since 1991, when a dengue emergency coincides with the NVW). Success factors included sufficient funds and supplies to ensure sustainability and joint planning, delivery, and monitoring. Several health interventions have been integrated with vaccination delivery in Honduras for nearly 20 years. The immunization program in Honduras has sufficient structure, organization, acceptance, coverage, and experience to achieve successful integration with health interventions if carefully planned and suitably implemented.

Integrative platform based on the mechatronics model for educational technologies focused on competence

NASA Astrophysics Data System (ADS)

Vlaşin, I.; Greta, S.; Dache, L.; Mătieş, V.

2016-08-01

Mechatronics is a model of transdisciplinary integration, entirely functional, with remarkable results for mankind. The incredible progress that the global economy has taken in the last decades is based on this new approach, the integrative type, which is present at the foundation of mechatronics. This kind of integrative approach is necessary for building a quality education focused on competence. The requirements from the social and economic environment, the needs of the young people who prepare themselves for an active life and the offers of the education providers are still not too interconnected to offer a satisfying education. This is the reason why the efforts to balance the demand, the needs and the offer are essential to ensure a better integration of students into society. Using a transcultural perspective, we can achieve a constructive approach. The education providers, together with the socio-economic environment, establish a clear structure of competence in multiple domains and of the instruments which can assure it. The scientific demarche, in the spirit of this paper approach the, answers the natural questions from the educational process: „Why, How and What do I learn?”.

Hardness of AISI type 410 martensitic steels after high temperature irradiation via nanoindentation

NASA Astrophysics Data System (ADS)

Waseem, Owais Ahmed; Jeong, Jong-Ryul; Park, Byong-Guk; Maeng, Cheol-Soo; Lee, Myoung-Goo; Ryu, Ho Jin

2017-11-01

The hardness of irradiated AISI type 410 martensitic steel, which is utilized in structural and magnetic components of nuclear power plants, is investigated in this study. Proton irradiation of AISI type 410 martensitic steel samples was carried out by exposing the samples to 3 MeV protons up to a 1.0 × 1017 p/cm2 fluence level at a representative nuclear reactor coolant temperature of 350 °C. The assessment of deleterious effects of irradiation on the micro-structure and mechanical behavior of the AISI type 410 martensitic steel samples via transmission electron microscopy-energy dispersive spectroscopy and cross-sectional nano-indentation showed no significant variation in the microscopic or mechanical characteristics. These results ensure the integrity of the structural and magnetic components of nuclear reactors made of AISI type 410 martensitic steel under high-temperature irradiation damage levels up to approximately 5.2 × 10-3 dpa.

A novel multi-level IC-compatible surface microfabrication technology for MEMS with independently controlled lateral and vertical submicron transduction gaps

NASA Astrophysics Data System (ADS)

Cicek, Paul-Vahe; Elsayed, Mohannad; Nabki, Frederic; El-Gamal, Mourad

2017-11-01

An above-IC compatible multi-level MEMS surface microfabrication technology based on a silicon carbide structural layer is presented. The fabrication process flow provides optimal electrostatic transduction by allowing the creation of independently controlled submicron vertical and lateral gaps without the need for high resolution lithography. Adopting silicon carbide as the structural material, the technology ensures material, chemical and thermal compatibility with modern semiconductor nodes, reporting the lowest peak processing temperature (i.e. 200 °C) of all comparable works. This makes this process ideally suited for integrating capacitive-based MEMS directly above standard CMOS substrates. Process flow design and optimization are presented in the context of bulk-mode disk resonators, devices that are shown to exhibit improved performance with respect to previous generation flexural beam resonators, and that represent relatively complex MEMS structures. The impact of impending improvements to the fabrication technology is discussed.

Simulations of carbon fiber composite delamination tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kay, G

2007-10-25

Simulations of mode I interlaminar fracture toughness tests of a carbon-reinforced composite material (BMS 8-212) were conducted with LSDYNA. The fracture toughness tests were performed by U.C. Berkeley. The simulations were performed to investigate the validity and practicality of employing decohesive elements to represent interlaminar bond failures that are prevalent in carbon-fiber composite structure penetration events. The simulations employed a decohesive element formulation that was verified on a simple two element model before being employed to perform the full model simulations. Care was required during the simulations to ensure that the explicit time integration of LSDYNA duplicate the near steady-statemore » testing conditions. In general, this study validated the use of employing decohesive elements to represent the interlaminar bond failures seen in carbon-fiber composite structures, but the practicality of employing the elements to represent the bond failures seen in carbon-fiber composite structures during penetration events was not established.« less

Drosophila melanogaster muscle LIM protein and alpha-actinin function together to stabilize muscle cytoarchitecture: a potential role for Mlp84B in actin-crosslinking.

PubMed

Clark, Kathleen A; Kadrmas, Julie L

2013-06-01

Stabilization of tissue architecture during development and growth is essential to maintain structural integrity. Because of its contractile nature, muscle is especially susceptible to physiological stresses, and has multiple mechanisms to maintain structural integrity. The Drosophila melanogaster Muscle LIM Protein (MLP), Mlp84B, participates in muscle maintenance, yet its precise mechanism of action is still controversial. Through a candidate approach, we identified α-actinin as a protein that functions with Mlp84B to ensure muscle integrity. α-actinin RNAi animals die primarily as pupae, and Mlp84B RNAi animals are adult viable. RNAi knockdown of Mlp84B and α-actinin together produces synergistic early larval lethality and destabilization of Z-line structures. We recapitulated these phenotypes using combinations of traditional loss-of-function alleles and single-gene RNAi. We observe that Mlp84B induces the formation of actin loops in muscle cell nuclei in the absence of nuclear α-actinin, suggesting Mlp84B has intrinsic actin cross-linking activity, which may complement α-actinin cross-linking activity at sites of actin filament anchorage. These results reveal a molecular mechanism for MLP stabilization of muscle and implicate reduced actin crosslinking as the primary destabilizing defect in MLP-associated cardiomyopathies. Our data support a model in which α-actinin and Mlp84B have important and overlapping functions at sites of actin filament anchorage to preserve muscle structure and function. Copyright © 2013 Wiley Periodicals, Inc.

Aerodynamic levitator for in situ x-ray structure measurements on high temperature and molten nuclear fuel materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weber, J. K. R.; Alderman, O. L. G.; Advanced Photon Source, Argonne National Laboratory, Argonne, Illinois 60439

2016-07-15

An aerodynamic levitator with carbon dioxide laser beam heating was integrated with a hermetically sealed controlled atmosphere chamber and sample handling mechanism. The system enabled containment of radioactive samples and control of the process atmosphere chemistry. The chamber was typically operated at a pressure of approximately 0.9 bars to ensure containment of the materials being processed. Samples 2.5-3 mm in diameter were levitated in flowing gas to achieve containerless conditions. Levitated samples were heated to temperatures of up to 3500 °C with a partially focused carbon dioxide laser beam. Sample temperature was measured using an optical pyrometer. The sample environment wasmore » integrated with a high energy (100 keV) x-ray synchrotron beamline to enable in situ structure measurements to be made on levitated samples as they were heated, melted, and supercooled. The system was controlled from outside the x-ray beamline hutch by using a LabVIEW program. Measurements have been made on hot solid and molten uranium dioxide and binary uranium dioxide-zirconium dioxide compositions.« less

Aerodynamic levitator for in situ x-ray structure measurements on high temperature and molten nuclear fuel materials

DOE PAGES

Weber, J. K. R.; Tamalonis, A.; Benmore, C. J.; ...

2016-07-01

We integrated an aerodynamic levitator with carbon dioxide laser beam heating with a hermetically sealed controlled atmosphere chamber and sample handling mechanism. The system enabled containment of radioactive samples and control of the process atmosphere chemistry. Furthermore, the chamber was typically operated at a pressure of approximately 0.9 bars to ensure containment of the materials being processed. Samples 2.5-3 mm in diameter were levitated in flowing gas to achieve containerless conditions. Levitated samples were heated to temperatures of up to 3500 °C with a partially focused carbon dioxide laser beam. Sample temperature was measured using an optical pyrometer. The samplemore » environment was integrated with a high energy (100 keV) x-ray synchrotron beamline to enable in situ structure measurements to be made on levitated samples as they were heated, melted, and supercooled. Our system was controlled from outside the x-ray beamline hutch by using a LabVIEW program. Measurements have been made on hot solid and molten uranium dioxide and binary uranium dioxide-zirconium dioxide compositions.« less

A Systematic Framework for Addressing Treatment Integrity in School Settings

ERIC Educational Resources Information Center

Kupzyk, Sara; Shriver, Mark D.

2016-01-01

School psychologists are tasked with ensuring treatment integrity because the level of intervention implementation affects decisions about student progress. Treatment integrity includes multiple dimensions that may impact the effectiveness of an intervention including adherence, dosage, quality, and engagement. Unfortunately, treatment integrity…

Tracking Architecture Based on Dual-Filter with State Feedback and Its Application in Ultra-Tight GPS/INS Integration

PubMed Central

Zhang, Xi; Miao, Lingjuan; Shao, Haijun

2016-01-01

If a Kalman Filter (KF) is applied to Global Positioning System (GPS) baseband signal preprocessing, the estimates of signal phase and frequency can have low variance, even in highly dynamic situations. This paper presents a novel preprocessing scheme based on a dual-filter structure. Compared with the traditional model utilizing a single KF, this structure avoids carrier tracking being subjected to code tracking errors. Meanwhile, as the loop filters are completely removed, state feedback values are adopted to generate local carrier and code. Although local carrier frequency has a wide fluctuation, the accuracy of Doppler shift estimation is improved. In the ultra-tight GPS/Inertial Navigation System (INS) integration, the carrier frequency derived from the external navigation information is not viewed as the local carrier frequency directly. That facilitates retaining the design principle of state feedback. However, under harsh conditions, the GPS outputs may still bear large errors which can destroy the estimation of INS errors. Thus, an innovative integrated navigation filter is constructed by modeling the non-negligible errors in the estimated Doppler shifts, to ensure INS is properly calibrated. Finally, field test and semi-physical simulation based on telemetered missile trajectory validate the effectiveness of methods proposed in this paper. PMID:27144570

Tracking Architecture Based on Dual-Filter with State Feedback and Its Application in Ultra-Tight GPS/INS Integration.

PubMed

Zhang, Xi; Miao, Lingjuan; Shao, Haijun

2016-05-02

If a Kalman Filter (KF) is applied to Global Positioning System (GPS) baseband signal preprocessing, the estimates of signal phase and frequency can have low variance, even in highly dynamic situations. This paper presents a novel preprocessing scheme based on a dual-filter structure. Compared with the traditional model utilizing a single KF, this structure avoids carrier tracking being subjected to code tracking errors. Meanwhile, as the loop filters are completely removed, state feedback values are adopted to generate local carrier and code. Although local carrier frequency has a wide fluctuation, the accuracy of Doppler shift estimation is improved. In the ultra-tight GPS/Inertial Navigation System (INS) integration, the carrier frequency derived from the external navigation information is not viewed as the local carrier frequency directly. That facilitates retaining the design principle of state feedback. However, under harsh conditions, the GPS outputs may still bear large errors which can destroy the estimation of INS errors. Thus, an innovative integrated navigation filter is constructed by modeling the non-negligible errors in the estimated Doppler shifts, to ensure INS is properly calibrated. Finally, field test and semi-physical simulation based on telemetered missile trajectory validate the effectiveness of methods proposed in this paper.

Using dual classifications in the development of avian wetland indices of biological integrity for wetlands in West Virginia, USA.

PubMed

Veselka, Walter; Anderson, James T; Kordek, Walter S

2010-05-01

Considerable resources are being used to develop and implement bioassessment methods for wetlands to ensure that "biological integrity" is maintained under the United States Clean Water Act. Previous research has demonstrated that avian composition is susceptible to human impairments at multiple spatial scales. Using a site-specific disturbance gradient, we built avian wetland indices of biological integrity (AW-IBI) specific to two wetland classification schemes, one based on vegetative structure and the other based on the wetland's position in the landscape and sources of water. The resulting class-specific AW-IBI was comprised of one to four metrics that varied in their sensitivity to the disturbance gradient. Some of these metrics were specific to only one of the classification schemes, whereas others could discriminate varying levels of disturbance regardless of classification scheme. Overall, all of the derived biological indices specific to the vegetative structure-based classes of wetlands had a significant relation with the disturbance gradient; however, the biological index derived for floodplain wetlands exhibited a more consistent response to a local disturbance gradient. We suspect that the consistency of this response is due to the inherent nature of the connectivity of available habitat in floodplain wetlands.

Applications of Advanced Nondestructive Measurement Techniques to Address Safety of Flight Issues on NASA Spacecraft

NASA Technical Reports Server (NTRS)

Prosser, Bill

2016-01-01

Advanced nondestructive measurement techniques are critical for ensuring the reliability and safety of NASA spacecraft. Techniques such as infrared thermography, THz imaging, X-ray computed tomography and backscatter X-ray are used to detect indications of damage in spacecraft components and structures. Additionally, sensor and measurement systems are integrated into spacecraft to provide structural health monitoring to detect damaging events that occur during flight such as debris impacts during launch and assent or from micrometeoroid and orbital debris, or excessive loading due to anomalous flight conditions. A number of examples will be provided of how these nondestructive measurement techniques have been applied to resolve safety critical inspection concerns for the Space Shuttle, International Space Station (ISS), and a variety of launch vehicles and unmanned spacecraft.

Functional, Structural, and Neurotoxicity Biomarkers in Integrative Assessment of Concussions

PubMed Central

Dambinova, Svetlana A.; Maroon, Joseph C.; Sufrinko, Alicia M.; Mullins, John David; Alexandrova, Eugenia V.; Potapov, Alexander A.

2016-01-01

Concussion is a complex, heterogeneous process affecting the brain. Accurate assessment and diagnosis and appropriate management of concussion are essential to ensure that athletes do not prematurely return to play or others to work or active military duty, risking re-injury. To date, clinical diagnosis relies primarily on evaluating subjects for functional impairment using instruments that include neurocognitive testing, subjective symptom report, and neurobehavioral assessments, such as balance and vestibular-ocular reflex testing. Structural biomarkers, defined as advanced neuroimaging techniques and biomarkers assessing neurotoxicity and immunoexcitotoxicity, may complement the use of functional biomarkers. We hypothesize that neurotoxicity AMPA, NMDA, and kainite receptor biomarkers might be utilized as a part of comprehensive approach to concussion evaluations, with the goal of increasing diagnostic accuracy and facilitating treatment planning and prognostic assessment. PMID:27761129

Translational neurocardiology: preclinical models and cardioneural integrative aspects

PubMed Central

Andresen, M. C.; Armour, J. A.; Billman, G. E.; Chen, P.‐S.; Foreman, R. D.; Herring, N.; O'Leary, D. S.; Sabbah, H. N.; Schultz, H. D.; Sunagawa, K.; Zucker, I. H.

2016-01-01

Abstract Neuronal elements distributed throughout the cardiac nervous system, from the level of the insular cortex to the intrinsic cardiac nervous system, are in constant communication with one another to ensure that cardiac output matches the dynamic process of regional blood flow demand. Neural elements in their various ‘levels’ become differentially recruited in the transduction of sensory inputs arising from the heart, major vessels, other visceral organs and somatic structures to optimize neuronal coordination of regional cardiac function. This White Paper will review the relevant aspects of the structural and functional organization for autonomic control of the heart in normal conditions, how these systems remodel/adapt during cardiac disease, and finally how such knowledge can be leveraged in the evolving realm of autonomic regulation therapy for cardiac therapeutics. PMID:27098459

Defending the scientific integrity of conservation-policy processes.

PubMed

Carroll, Carlos; Hartl, Brett; Goldman, Gretchen T; Rohlf, Daniel J; Treves, Adrian; Kerr, Jeremy T; Ritchie, Euan G; Kingsford, Richard T; Gibbs, Katherine E; Maron, Martine; Watson, James E M

2017-10-01

Government agencies faced with politically controversial decisions often discount or ignore scientific information, whether from agency staff or nongovernmental scientists. Recent developments in scientific integrity (the ability to perform, use, communicate, and publish science free from censorship or political interference) in Canada, Australia, and the United States demonstrate a similar trajectory. A perceived increase in scientific-integrity abuses provokes concerted pressure by the scientific community, leading to efforts to improve scientific-integrity protections under a new administration. However, protections are often inconsistently applied and are at risk of reversal under administrations publicly hostile to evidence-based policy. We compared recent challenges to scientific integrity to determine what aspects of scientific input into conservation policy are most at risk of political distortion and what can be done to strengthen safeguards against such abuses. To ensure the integrity of outbound communications from government scientists to the public, we suggest governments strengthen scientific integrity policies, include scientists' right to speak freely in collective-bargaining agreements, guarantee public access to scientific information, and strengthen agency culture supporting scientific integrity. To ensure the transparency and integrity with which information from nongovernmental scientists (e.g., submitted comments or formal policy reviews) informs the policy process, we suggest governments broaden the scope of independent reviews, ensure greater diversity of expert input and transparency regarding conflicts of interest, require a substantive response to input from agencies, and engage proactively with scientific societies. For their part, scientists and scientific societies have a responsibility to engage with the public to affirm that science is a crucial resource for developing evidence-based policy and regulations in the public interest. © 2017 The Authors. Conservation Biology published by Wiley Periodicals, Inc. on behalf of Society for Conservation Biology.

Integrated care reform in urban China: a qualitative study on design, supporting environment and implementation.

PubMed

Qian, Yi; Hou, Zhiyuan; Wang, Wei; Zhang, Donglan; Yan, Fei

2017-10-25

Initiatives on integrated care between hospitals and community health centers (CHCs) have been introduced to transform the current fragmented health care delivery system into an integrated system in China. Up to date no research has analyzed in-depth the experiences of these initiatives based on perspectives from various stakeholders. This study analyzed the integrated care pilot in Hangzhou City by investigating stakeholders' perspectives on its design features and supporting environment, their acceptability of this pilot, and further identifying the enabling and constraining factors that may influence the implementation of the integrated care reform. The qualitative study was carried out based on in-depth interviews and focus group discussions with 50 key informants who were involved in the policy-making process and implementation. Relevant policy documents were also collected for analysis. The pilot in Hangzhou was established as a CHC-led delivery system based on cooperation agreement between CHCs and hospitals to deliver primary and specialty care together for patients with chronic diseases. An innovative learning-from-practice mentorship system between specialists and general practitioners was also introduced to solve the poor capacity of general practitioners. The design of the pilot, its governance and organizational structure and human resources were enabling factors, which facilitated the integrated care reform. However, the main constraining factors were a lack of an integrated payment mechanism from health insurance and a lack of tailored information system to ensure its sustainability. The integrated care pilot in Hangzhou enabled CHCs to play as gate-keeper and care coordinator for the full continuum of services across the health care providers. The government put integrated care a priority, and constructed an efficient design, governance and organizational structure to enable its implementation. Health insurance should play a proactive role, and adopt a shared financial incentive system to support integrated care across providers in the future.

Site systems engineering fiscal year 1999 multi-year work plan (MYWP) update for WBS 1.8.2.2

DOE Office of Scientific and Technical Information (OSTI.GOV)

GRYGIEL, M.L.

1998-10-08

Manage the Site Systems Engineering process to provide a traceable integrated requirements-driven, and technically defensible baseline. Through the Site Integration Group(SIG), Systems Engineering ensures integration of technical activities across all site projects. Systems Engineering's primary interfaces are with the RL Project Managers, the Project Direction Office and with the Project Major Subcontractors, as well as with the Site Planning organization. Systems Implementation: (1) Develops, maintains, and controls the site integrated technical baseline, ensures the Systems Engineering interfaces between projects are documented, and maintain the Site Environmental Management Specification. (2) Develops and uses dynamic simulation models for verification of the baselinemore » and analysis of alternatives. (3) Performs and documents fictional and requirements analyses. (4) Works with projects, technology management, and the SIG to identify and resolve technical issues. (5) Supports technical baseline information for the planning and budgeting of the Accelerated Cleanup Plan, Multi-Year Work Plans, Project Baseline Summaries as well as performance measure reporting. (6) Works with projects to ensure the quality of data in the technical baseline. (7) Develops, maintains and implements the site configuration management system.« less

Responsible science: Ensuring the integrity of the research process. Volume 2. Final report, 1989--1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

In 1989, the National Academy of Sciences, the National Academy of Engineering, and the Institute of Medicine initiated a major study to examine issues related to the responsible conduct of research. The findings and recommendations were published in March 1992 as: Responsible Science: Ensuring the Integrity of the Research Process, Vol. 1. Volume II of the report, this volume, includes the six commissioned background papers as well as selected institutional guidelines, reports, policies, and procedures. The institutional statements reprinted in Volume II have been selected to convey the diverse approaches for addressing different aspects of misconduct or integrity in sciencemore » within research institutions.« less

Integrating freight into NEPA analysis

DOT National Transportation Integrated Search

2010-09-01

The effi ciency and effectiveness of freight transportation is critical for economic growth and development, : ensuring livable communities, and creating a sustainable human and natural environment. It is increasingly : important to integrate freight...

Uses and limitations of registry and academic databases.

PubMed

Williams, William G

2010-01-01

A database is simply a structured collection of information. A clinical database may be a Registry (a limited amount of data for every patient undergoing heart surgery) or Academic (an organized and extensive dataset of an inception cohort of carefully selected subset of patients). A registry and an academic database have different purposes and cost. The data to be collected for a database is defined by its purpose and the output reports required for achieving that purpose. A Registry's purpose is to ensure quality care, an Academic Database, to discover new knowledge through research. A database is only as good as the data it contains. Database personnel must be exceptionally committed and supported by clinical faculty. A system to routinely validate and verify data integrity is essential to ensure database utility. Frequent use of the database improves its accuracy. For congenital heart surgeons, routine use of a Registry Database is an essential component of clinical practice. Copyright (c) 2010 Elsevier Inc. All rights reserved.

Unmanned aerial vehicles in construction and worker safety.

PubMed

Howard, John; Murashov, Vladimir; Branche, Christine M

2018-01-01

Applications of unmanned aerial vehicles (UAVs) for military, recreational, public, and commercial uses have expanded significantly in recent years. In the construction industry, UAVs are used primarily for monitoring of construction workflow and job site logistics, inspecting construction sites to assess structural integrity, and for maintenance assessments. As is the case with other emerging technologies, occupational safety assessments of UAVs lag behind technological advancements. UAVs may create new workplace hazards that need to be evaluated and managed to ensure their safe operation around human workers. At the same time, UAVs can perform dangerous tasks, thereby improving workplace safety. This paper describes the four major uses of UAVs, including their use in construction, the potential risks of their use to workers, approaches for risk mitigation, and the important role that safety and health professionals can play in ensuring safe approaches to the their use in the workplace. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

More than a headcount: towards strategic stakeholder representation in catchment management in South Africa and Zimbabwe

NASA Astrophysics Data System (ADS)

Manzungu, Emmanuel

In 1998 both South Africa and Zimbabwe promulgated new water laws to ensure that ownership and user-ship patterns of water resources match the new socio-political order. Integrated water resource management, incorporating among other things decentralized and democratized water management institutions and the principles of stakeholder participation, was regarded as the cornerstone of the reforms. This article examines how stakeholder representation, particularly of the formerly disadvantaged people, has been handled. It is observed that there has been too much effort dedicated to ensure a mere headcount of the stakeholders at the water table rather than on strategic representation. Strategic representation emphasizes stakeholder identity instead of consensus. Selective alliance building is important as is establishing genuine local level platforms with enough political space outside the state-tailored formal straight jackets. It is equally important to address developmental aspects of establishing catchment-wide bodies and structural problems such as access to land and financial resources. Without addressing these issues stakeholder representation will remain hamstrung in good intentions.

Nonlinear integrable model of Frenkel-like excitations on a ribbon of triangular lattice

NASA Astrophysics Data System (ADS)

Vakhnenko, Oleksiy O.

2015-03-01

Following the considerable progress in nanoribbon technology, we propose to model the nonlinear Frenkel-like excitations on a triangular-lattice ribbon by the integrable nonlinear ladder system with the background-controlled intersite resonant coupling. The system of interest arises as a proper reduction of first general semidiscrete integrable system from an infinite hierarchy. The most significant local conservation laws related to the first general integrable system are found explicitly in the framework of generalized recursive approach. The obtained general local densities are equally applicable to any general semidiscrete integrable system from the respective infinite hierarchy. Using the recovered second densities, the Hamiltonian formulation of integrable nonlinear ladder system with background-controlled intersite resonant coupling is presented. In doing so, the relevant Poisson structure turns out to be essentially nontrivial. The Darboux transformation scheme as applied to the first general semidiscrete system is developed and the key role of Bäcklund transformation in justification of its self-consistency is pointed out. The spectral properties of Darboux matrix allow to restore the whole Darboux matrix thus ensuring generation one more soliton as compared with a priori known seed solution of integrable nonlinear system. The power of Darboux-dressing method is explicitly demonstrated in generating the multicomponent one-soliton solution to the integrable nonlinear ladder system with background-controlled intersite resonant coupling.

42 CFR 493.1232 - Standard: Specimen identification and integrity.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Standard: Specimen identification and integrity... Nonwaived Testing General Laboratory Systems § 493.1232 Standard: Specimen identification and integrity. The laboratory must establish and follow written policies and procedures that ensure positive identification and...

Systems Integration Processes for NASA Ares I Crew Launch Vehicle

NASA Technical Reports Server (NTRS)

Taylor, James L.; Reuter, James L.; Sexton, Jeffrey D.

2006-01-01

NASA's Exploration Initiative will require development of many new elements to constitute a robust system of systems. New launch vehicles are needed to place cargo and crew in stable Low Earth Orbit (LEO). This paper examines the systems integration processes NASA is utilizing to ensure integration and control of propulsion and nonpropulsion elements within NASA's Crew Launch Vehicle (CLV), now known as the Ares I. The objective of the Ares I is to provide the transportation capabilities to meet the Constellation Program requirements for delivering a Crew Exploration Vehicle (CEV) or other payload to LEO in support of the lunar and Mars missions. The Ares I must successfully provide this capability within cost and schedule, and with an acceptable risk approach. This paper will describe the systems engineering management processes that will be applied to assure Ares I Project success through complete and efficient technical integration. Discussion of technical review and management processes for requirements development and verification, integrated design and analysis, integrated simulation and testing, and the integration of reliability, maintainability and supportability (RMS) into the design will also be included. The Ares I Project is logically divided into elements by the major hardware groupings, and associated management, system engineering, and integration functions. The processes to be described herein are designed to integrate within these Ares I elements and among the other Constellation projects. Also discussed is launch vehicle stack integration (Ares I to CEV, and Ground and Flight Operations integration) throughout the life cycle, including integrated vehicle performance through orbital insertion, recovery of the first stage, and reentry of the upper stage. The processes for decomposing requirements to the elements and ensuring that requirements have been correctly validated, decomposed, and allocated, and that the verification requirements are properly defined to ensure that the system design meets requirements, will be discussed.

Integration of CBIR in radiological routine in accordance with IHE

NASA Astrophysics Data System (ADS)

Welter, Petra; Deserno, Thomas M.; Fischer, Benedikt; Wein, Berthold B.; Ott, Bastian; Günther, Rolf W.

2009-02-01

Increasing use of digital imaging processing leads to an enormous amount of imaging data. The access to picture archiving and communication systems (PACS), however, is solely textually, leading to sparse retrieval results because of ambiguous or missing image descriptions. Content-based image retrieval (CBIR) systems can improve the clinical diagnostic outcome significantly. However, current CBIR systems are not able to integrate their results with clinical workflow and PACS. Existing communication standards like DICOM and HL7 leave many options for implementation and do not ensure full interoperability. We present a concept of the standardized integration of a CBIR system for the radiology workflow in accordance with the Integrating the Healthcare Enterprise (IHE) framework. This is based on the IHE integration profile 'Post-Processing Workflow' (PPW) defining responsibilities as well as standardized communication and utilizing the DICOM Structured Report (DICOM SR). Because nowadays most of PACS and RIS systems are not yet fully IHE compliant to PPW, we also suggest an intermediate approach with the concepts of the CAD-PACS Toolkit. The integration is independent of the particular PACS and RIS system. Therefore, it supports the widespread application of CBIR in radiological routine. As a result, the approach is exemplarily applied to the Image Retrieval in Medical Applications (IRMA) framework.

Physical constraints on biological integral control design for homeostasis and sensory adaptation.

PubMed

Ang, Jordan; McMillen, David R

2013-01-22

Synthetic biology includes an effort to use design-based approaches to create novel controllers, biological systems aimed at regulating the output of other biological processes. The design of such controllers can be guided by results from control theory, including the strategy of integral feedback control, which is central to regulation, sensory adaptation, and long-term robustness. Realization of integral control in a synthetic network is an attractive prospect, but the nature of biochemical networks can make the implementation of even basic control structures challenging. Here we present a study of the general challenges and important constraints that will arise in efforts to engineer biological integral feedback controllers or to analyze existing natural systems. Constraints arise from the need to identify target output values that the combined process-plus-controller system can reach, and to ensure that the controller implements a good approximation of integral feedback control. These constraints depend on mild assumptions about the shape of input-output relationships in the biological components, and thus will apply to a variety of biochemical systems. We summarize our results as a set of variable constraints intended to provide guidance for the design or analysis of a working biological integral feedback controller. Copyright © 2013 Biophysical Society. Published by Elsevier Inc. All rights reserved.

Multi-Sensor Documentation of Metric and Qualitative Information of Historic Stone Structures

NASA Astrophysics Data System (ADS)

Adamopoulos, E.; Tsilimantou, E.; Keramidas, V.; Apostolopoulou, M.; Karoglou, M.; Tapinaki, S.; Ioannidis, C.; Georgopoulos, A.; Moropoulou, A.

2017-08-01

This paper focuses on the integration of multi-sensor techniques regarding the acquisition, processing, visualisation and management of data regarding historic stone structures. The interdisciplinary methodology that is carried out here comprises of two parts. In the first part, the acquisition of qualitative and quantitative data concerning the geometry, the materials and the degradation of the tangible heritage asset each time, is discussed. The second part, refers to the analysis, management and visualization of the interrelated data by using spatial information technologies. Through the paradigm of the surveying of the ancient temple of Pythian Apollo at Acropolis of Rhodes, Rhodes Island, Greece, it is aimed to highlight the issues deriving from the separate application of documentation procedures and how the fusion of these methods can contribute effectively to ensure the completeness of the measurements for complex structures. The surveying results are further processed to be compatible and integrated with GIS. Also, the geometric documentation derivatives are combined with environmental data and the results of the application of non-destructive testing and evaluation techniques in situ and analytical techniques in lab after sampling. GIS operations are utilized to document the building materials but also to model and to analyse the decay extent and patterns. Detailed surface measurements and geo-processing analysis are executed. This integrated approach, helps the assessment of past interventions on the monument, identify main causes of damage and decay, and finally assist the decision making on the most compatible materials and techniques for protection and restoration works.

Advanced earthquake monitoring system for U.S. Department of Veterans Affairs medical buildings--instrumentation

USGS Publications Warehouse

Kalkan, Erol; Banga, Krishna; Ulusoy, Hasan S.; Fletcher, Jon Peter B.; Leith, William S.; Reza, Shahneam; Cheng, Timothy

2012-01-01

In collaboration with the U.S. Department of Veterans Affairs (VA), the National Strong Motion Project (NSMP; http://nsmp.wr.usgs.gov/) of the U.S. Geological Survey has been installing sophisticated seismic systems that will monitor the structural integrity of 28 VA hospital buildings located in seismically active regions of the conterminous United States, Alaska, and Puerto Rico during earthquake shaking. These advanced monitoring systems, which combine the use of sensitive accelerometers and real-time computer calculations, are designed to determine the structural health of each hospital building rapidly after an event, helping the VA to ensure the safety of patients and staff. This report presents the instrumentation component of this project by providing details of each hospital building, including a summary of its structural, geotechnical, and seismic hazard information, as well as instrumentation objectives and design. The structural-health monitoring component of the project, including data retrieval and processing, damage detection and localization, automated alerting system, and finally data dissemination, will be presented in a separate report.

Jim Starnes' Contributions to Residual Strength Analysis Methods for Metallic Structures

NASA Technical Reports Server (NTRS)

Young, Richard D.; Rose, Cheryl A.; Harris, Charles E.

2005-01-01

A summary of advances in residual strength analyses methods for metallic structures that were realized under the leadership of Dr. James H. Starnes, Jr., is presented. The majority of research led by Dr. Starnes in this area was conducted in the 1990's under the NASA Airframe Structural Integrity Program (NASIP). Dr. Starnes, respectfully referred to herein as Jim, had a passion for studying complex response phenomena and dedicated a significant amount of research effort toward advancing damage tolerance and residual strength analysis methods for metallic structures. Jim's efforts were focused on understanding damage propagation in built-up fuselage structure with widespread fatigue damage, with the goal of ensuring safety in the aging international commercial transport fleet. Jim's major contributions in this research area were in identifying the effects of combined internal pressure and mechanical loads, and geometric nonlinearity, on the response of built-up structures with damage. Analytical and experimental technical results are presented to demonstrate the breadth and rigor of the research conducted in this technical area. Technical results presented herein are drawn exclusively from papers where Jim was a co-author.

Management of complex implant aesthetics: ensuring restorative design continuity with a comprehensive outcome-based strategy.

PubMed

Lee, E A; Jun, S K

2001-09-01

Since implant therapy must be dictated by prosthetic requirements, a protocol for the comprehensive and continuous integration of the restorative blueprint through the entire treatment planning and clinical execution phases is mandatory. This article demonstrates a systematic approach where the establishment of a final restorative treatment objective is incorporated into the diagnosis and subsequently integrated through every phase of clinical execution. Design continuity is ensured, and multidisciplinary cohesiveness is enhanced by providing clearly defined treatment objectives to every member of the clinical team.

Knowledge exchange and integrated services: experiences from an integrated community intellectual (learning) disability service for adults.

PubMed

Farrington, C; Clare, I C H; Holland, A J; Barrett, M; Oborn, E

2015-03-01

This paper examines knowledge exchange dynamics in a specialist integrated intellectual (learning) disability service, comprising specialist healthcare provision with social care commissioning and management, and considers their significance in terms of integrated service delivery. A qualitative study focusing on knowledge exchange and integrated services. Semi-structured interviews (n = 25) were conducted with members of an integrated intellectual disability service in England regarding their perceptions of knowledge exchange within the service and the way in which knowledge exchange impinges on the operation of the integrated service. Exchange of 'explicit' (codifiable) knowledge between health and care management components of the service is problematic because of a lack of integrated clinical governance and related factors such as IT and care record systems and office arrangements. Team meetings and workplace interactions allowed for informal exchange of explicit and 'tacit' (non-codifiable) knowledge, but presented challenges in terms of knowledge exchange completeness and sustainability. Knowledge exchange processes play an important role in the functioning of integrated services incorporating health and care management components. Managers need to ensure that knowledge exchange processes facilitate both explicit and tacit knowledge exchange and do not rely excessively on informal, 'ad hoc' interactions. Research on integrated services should take account of micro-scale knowledge exchange dynamics and relationships between social dynamics and physical factors. © 2014 MENCAP and International Association of the Scientific Study of Intellectual and Developmental Disabilities and John Wiley & Sons Ltd.

Formation of production structural units within a construction company using the systemic integrated method when implementing high-rise development projects

NASA Astrophysics Data System (ADS)

Lapidus, Azary; Abramov, Ivan

2018-03-01

Development of efficient algorithms for designing future operations is a vital element in construction business. This paper studies various aspects of a methodology required to determine the integration index for construction crews performing various process-related jobs. The main objective of the study outlined in this paper is to define the notion of integration in respect to a construction crew that performs complete cycles of construction and assembly works in order to find the optimal organizational solutions, using the integrated crew algorithm built specifically for that purpose. As seen in the sequence of algorithm elements, it was designed to focus on the key factors affecting the level of integration of a construction crew depending on the value of each of those elements. The multifactor modelling approach is used to assess the KPI of integrated construction crews involved in large-sale high-rise construction projects. The purpose of this study is to develop a theoretical recommendation and a scientific methodological provision of organizational and technological nature to ensure qualitative formation of integrated construction crews to increase their productivity during integrated implementation of multi-task construction phases. The key difference of the proposed solution from the already existing ones is that it requires identification of the degree of impact of each factor, including the change in the qualification level, on the integration index of each separate element in the organizational and technological system in construction (integrated construction crew).

75 FR 16202 - Office of New Reactors; Interim Staff Guidance on Ensuring Hazard-Consistent Seismic Input for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-31

... Staff Guidance on Ensuring Hazard-Consistent Seismic Input for Site Response and Soil Structure...-Consistent Seismic Input for Site Response and Soil Structure Interaction Analyses,'' (Agencywide Documents... Soil Structure Interaction Analyses,'' (ADAMS Accession No. ML092230455) to solicit public and industry...

Academic Integrity: Information Systems Education Perspective

ERIC Educational Resources Information Center

McHaney, Roger; Cronan, Timothy Paul; Douglas, David E.

2016-01-01

Academic integrity receives a great deal of attention in institutions of higher education. Universities and colleges provide specific honor codes or have administrative units to promote good behaviors and resolve dishonesty allegations. Students, faculty, and staff have stakes in maintaining high levels of academic integrity to ensure their…

Structural integrated sensor and actuator systems for active flow control

NASA Astrophysics Data System (ADS)

Behr, Christian; Schwerter, Martin; Leester-Schädel, Monika; Wierach, Peter; Dietzel, Andreas; Sinapius, Michael

2016-04-01

An adaptive flow separation control system is designed and implemented as an essential part of a novel high-lift device for future aircraft. The system consists of MEMS pressure sensors to determine the flow conditions and adaptive lips to regulate the mass flow and the velocity of a wall near stream over the internally blown Coanda flap. By the oscillating lip the mass flow in the blowing slot changes dynamically, consequently the momentum exchange of the boundary layer over a high lift flap required mass flow can be reduced. These new compact and highly integrated systems provide a real-time monitoring and manipulation of the flow conditions. In this context the integration of pressure sensors into flow sensing airfoils of composite material is investigated. Mechanical and electrical properties of the integrated sensors are investigated under mechanical loads during tensile tests. The sensors contain a reference pressure chamber isolated to the ambient by a deformable membrane with integrated piezoresistors connected as a Wheatstone bridge, which outputs voltage signals depending on the ambient pressure. The composite material in which the sensors are embedded consists of 22 individual layers of unidirectional glass fiber reinforced plastic (GFRP) prepreg. The results of the experiments are used for adapting the design of the sensors and the layout of the laminate to ensure an optimized flux of force in highly loaded structures primarily for future aeronautical applications. It can be shown that the pressure sensor withstands the embedding process into fiber composites with full functional capability and predictable behavior under stress.

Health care consumers’ perspectives on pharmacist integration into private general practitioner clinics in Malaysia: a qualitative study

PubMed Central

Saw, Pui San; Nissen, Lisa M; Freeman, Christopher; Wong, Pei Se; Mak, Vivienne

2015-01-01

Background Pharmacists are considered medication experts but are underutilized and exist mainly at the periphery of the Malaysian primary health care team. Private general practitioners (GPs) in Malaysia are granted rights under the Poison Act 1952 to prescribe and dispense medications at their primary care clinics. As most consumers obtain their medications from their GPs, community pharmacists’ involvement in ensuring safe use of medicines is limited. The integration of a pharmacist into private GP clinics has the potential to contribute to quality use of medicines. This study aims to explore health care consumers’ views on the integration of pharmacists within private GP clinics in Malaysia. Methods A purposive sample of health care consumers in Selangor and Kuala Lumpur, Malaysia, were invited to participate in focus groups and semi-structured interviews. Sessions were audio recorded and transcribed verbatim and thematically analyzed using NVivo 10. Results A total of 24 health care consumers participated in two focus groups and six semi-structured interviews. Four major themes were identified: 1) pharmacists’ role viewed mainly as supplying medications, 2) readiness to accept pharmacists in private GP clinics, 3) willingness to pay for pharmacy services, and 4) concerns about GPs’ resistance to pharmacist integration. Consumers felt that a pharmacist integrated into a private GP clinic could offer potential benefits such as to provide trustworthy information on the use and potential side effects of medications and screening for medication misadventure. The potential increase in costs passed on to consumers and GPs’ reluctance were perceived as barriers to integration. Conclusion This study provides insights into consumers’ perspectives on the roles of pharmacists within private GP clinics in Malaysia. Consumers generally supported pharmacist integration into private primary health care clinics. However, for pharmacists to expand their capacity in providing integrated and collaborative primary care services to consumers, barriers to pharmacist integration need to be addressed. PMID:25834411

The Logic of Integrating Conventional and Nuclear Planning [Integration of conventional and nuclear: What does it mean?

DOE PAGES

Manzo, Vincent A.; Miles, Aaron R.

2016-10-31

In October 2015, Secretary of Defense Carter called for NATO to better integrate conventional and nuclear deterrence. Four months later, Assistant Secretary of Defense Robert Scher stated in Senate testimony that the DoD is "working to ensure an appropriate level of integration between nuclear and conventional planning and operations."

Active vortex generator deployed on demand by size independent actuation of shape memory alloy wires integrated in fiber reinforced polymers

NASA Astrophysics Data System (ADS)

Hübler, M.; Nissle, S.; Gurka, M.; Wassenaar, J.

2016-04-01

Static vortex generators (VGs) are installed on different aircraft types. They generate vortices and interfuse the slow boundary layer with the fast moving air above. Due to this energizing, a flow separation of the boundary layer can be suppressed at high angles of attack. However the VGs cause a permanently increased drag over the whole flight cycle reducing the cruise efficiency. This drawback is currently limiting the use of VGs. New active VGs, deployed only on demand at low speed, can help to overcome this contradiction. Active hybrid structures, combining the actuation of shape memory alloys (SMA) with fiber reinforced polymers (FRP) on the materials level, provide an actuation principle with high lightweight potential and minimum space requirements. Being one of the first applications of active hybrid structures from SMA and FRP, these active vortex generators help to demonstrate the advantages of this new technology. A new design approach and experimental results of active VGs are presented based on the application of unique design tools and advanced manufacturing approaches for these active hybrid structures. The experimental investigation of the actuation focuses on the deflection potential and the dynamic response. Benchmark performance data such as a weight of 1.5g and a maximum thickness of only 1.8mm per vortex generator finally ensure a simple integration in the wing structure.

Morphing Continuum Theory: A First Order Approximation to the Balance Laws

NASA Astrophysics Data System (ADS)

Wonnell, Louis; Cheikh, Mohamad Ibrahim; Chen, James

2017-11-01

Morphing Continuum Theory is constructed under the framework of Rational Continuum Mechanics (RCM) for fluid flows with inner structure. This multiscale theory has been successfully emplyed to model turbulent flows. The framework of RCM ensures the mathematical rigor of MCT, but contains new material constants related to the inner structure. The physical meanings of these material constants have yet to be determined. Here, a linear deviation from the zeroth-order Boltzmann-Curtiss distribution function is derived. When applied to the Boltzmann-Curtiss equation, a first-order approximation of the MCT governing equations is obtained. The integral equations are then related to the appropriate material constants found in the heat flux, Cauchy stress, and moment stress terms in the governing equations. These new material properties associated with the inner structure of the fluid are compared with the corresponding integrals, and a clearer physical interpretation of these coefficients emerges. The physical meanings of these material properties is determined by analyzing previous results obtained from numerical simulations of MCT for compressible and incompressible flows. The implications for the physics underlying the MCT governing equations will also be discussed. This material is based upon work supported by the Air Force Office of Scientific Research under Award Number FA9550-17-1-0154.

Practical Application of Sociology in Systems Engineering

NASA Technical Reports Server (NTRS)

Watson, Michael D.; Andrews, James G.; Eckley, Jeri Cassel; Culver, Michael L.

2017-01-01

Systems engineering involves both the integration of the system and the integration of the disciplines which develop and operate the system. Integrating the disciplines is a sociological effort to bring together different groups, who often have different terminology, to achieve a common goal, the system. The focus for the systems engineer is information flow through the organization, between the disciplines, to ensure the system is developed and operated will all relevant information informing system decisions. The practical application of the sociology in systems engineering brings in various organizational development concepts including the principles of planned renegotiation and the application of principles to address information barriers created by organizational culture. Concepts such as specification of ignorance, consistent terminology, opportunity structures, role-sets, and the reclama (reconsideration) process are all important sociological approaches that help address the organizational social structure (culture). In bringing the disciplines together, the systems engineer must also be wary of social ambivalence, social anomie, social dysfunction, and insider-outsider behavior. Unintended consequences can result when these social issues are present. These issues can occur when localized subcultures shift from the overarching organizational culture, or when the organizational culture prevents achievement of system goals. These sociological principles provide the systems engineer with key approaches to manage the information flow through the organization as the disciplines are integrated and share their information and provides key sociological barriers to information flow through the organization. This paper will discuss the practical application of sociological principles to systems engineering.

Experimental integration of quantum key distribution and gigabit-capable passive optical network

NASA Astrophysics Data System (ADS)

Sun, Wei; Wang, Liu-Jun; Sun, Xiang-Xiang; Mao, Yingqiu; Yin, Hua-Lei; Wang, Bi-Xiao; Chen, Teng-Yun; Pan, Jian-Wei

2018-01-01

Quantum key distribution (QKD) ensures information-theoretic security for the distribution of random bits between two remote parties. To extend QKD applications to fiber-to-the-home optical communications, such as gigabit-capable passive optical networks (GPONs), an effective method is the use of wavelength-division multiplexing. However, the Raman scattering noise from intensive classical traffic and the huge loss introduced by the beam splitter in a GPON severely limits the performance of QKD. Here, we demonstrate the integration of QKD and a commercial GPON system with fiber lengths up to 14 km, in which the maximum splitting ratio of the beam splitter reaches 1:64. By placing the QKD transmitter on the optical line terminal side, we reduce the Raman noise collected at the QKD receiver. Using a bypass structure, the loss of the beam splitter is circumvented effectively. Our results pave the way to extending the applications of QKD to last-mile communications.

The Enterprise Data Trust at Mayo Clinic: a semantically integrated warehouse of biomedical data

PubMed Central

Beck, Scott A; Fisk, Thomas B; Mohr, David N

2010-01-01

Mayo Clinic's Enterprise Data Trust is a collection of data from patient care, education, research, and administrative transactional systems, organized to support information retrieval, business intelligence, and high-level decision making. Structurally it is a top-down, subject-oriented, integrated, time-variant, and non-volatile collection of data in support of Mayo Clinic's analytic and decision-making processes. It is an interconnected piece of Mayo Clinic's Enterprise Information Management initiative, which also includes Data Governance, Enterprise Data Modeling, the Enterprise Vocabulary System, and Metadata Management. These resources enable unprecedented organization of enterprise information about patient, genomic, and research data. While facile access for cohort definition or aggregate retrieval is supported, a high level of security, retrieval audit, and user authentication ensures privacy, confidentiality, and respect for the trust imparted by our patients for the respectful use of information about their conditions. PMID:20190054

Fast and accurate Voronoi density gridding from Lagrangian hydrodynamics data

NASA Astrophysics Data System (ADS)

Petkova, Maya A.; Laibe, Guillaume; Bonnell, Ian A.

2018-01-01

Voronoi grids have been successfully used to represent density structures of gas in astronomical hydrodynamics simulations. While some codes are explicitly built around using a Voronoi grid, others, such as Smoothed Particle Hydrodynamics (SPH), use particle-based representations and can benefit from constructing a Voronoi grid for post-processing their output. So far, calculating the density of each Voronoi cell from SPH data has been done numerically, which is both slow and potentially inaccurate. This paper proposes an alternative analytic method, which is fast and accurate. We derive an expression for the integral of a cubic spline kernel over the volume of a Voronoi cell and link it to the density of the cell. Mass conservation is ensured rigorously by the procedure. The method can be applied more broadly to integrate a spherically symmetric polynomial function over the volume of a random polyhedron.

System design and integration of the large-scale advanced prop-fan

NASA Technical Reports Server (NTRS)

Huth, B. P.

1986-01-01

In recent years, considerable attention has been directed toward improving aircraft fuel consumption. Studies have shown that blades with thin airfoils and aerodynamic sweep extend the inherent efficiency advantage that turboprop propulsion systems have demonstrated to the higher speed to today's aircraft. Hamilton Standard has designed a 9-foot diameter single-rotation Prop-Fan. It will test the hardware on a static test stand, in low speed and high speed wind tunnels and on a research aircraft. The major objective of this testing is to establish the structural integrity of large scale Prop-Fans of advanced construction, in addition to the evaluation of aerodynamic performance and the aeroacoustic design. The coordination efforts performed to ensure smooth operation and assembly of the Prop-Fan are summarized. A summary of the loads used to size the system components, the methodology used to establish material allowables and a review of the key analytical results are given.

The Enterprise Data Trust at Mayo Clinic: a semantically integrated warehouse of biomedical data.

PubMed

Chute, Christopher G; Beck, Scott A; Fisk, Thomas B; Mohr, David N

2010-01-01

Mayo Clinic's Enterprise Data Trust is a collection of data from patient care, education, research, and administrative transactional systems, organized to support information retrieval, business intelligence, and high-level decision making. Structurally it is a top-down, subject-oriented, integrated, time-variant, and non-volatile collection of data in support of Mayo Clinic's analytic and decision-making processes. It is an interconnected piece of Mayo Clinic's Enterprise Information Management initiative, which also includes Data Governance, Enterprise Data Modeling, the Enterprise Vocabulary System, and Metadata Management. These resources enable unprecedented organization of enterprise information about patient, genomic, and research data. While facile access for cohort definition or aggregate retrieval is supported, a high level of security, retrieval audit, and user authentication ensures privacy, confidentiality, and respect for the trust imparted by our patients for the respectful use of information about their conditions.

Preliminary analysis of an integrated logistics system for OSSA payloads. Volume 3: OSSA integrated logistics support planning document

NASA Technical Reports Server (NTRS)

Palguta, T.; Bradley, W.; Stockton, T.

1988-01-01

Guidance in preparing and updating an integrated logistics support plan (ILSP) is given. Clear, concise, and detailed instructions are provided on the preparation and content of an ILSP in order to ensure a quality document that reflects total program requirements.

10 CFR 429.20 - Residential clothes washers.

Code of Federal Regulations, 2013 CFR

2013-01-01

...). For standard-size residential clothes washers, a water factor (WF) in gallons per cycle per cubic feet... integrated modified energy factor (IMEF) in cu ft/kWh/cycle, the integrated water factor (IWF) in gal/cycle... randomly selected and tested to ensure that— (i) Any represented value of the water factor, integrated...

10 CFR 429.20 - Residential clothes washers.

Code of Federal Regulations, 2014 CFR

2014-01-01

...). For standard-size residential clothes washers, a water factor (WF) in gallons per cycle per cubic feet... integrated modified energy factor (IMEF) in cu ft/kWh/cycle, the integrated water factor (IWF) in gal/cycle... randomly selected and tested to ensure that— (i) Any represented value of the water factor, integrated...

77 FR 21158 - VA Directive 0005 on Scientific Integrity: Availability for Review and Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-09

... the Director, Office of Science and Technology Policy's Memorandum of December 17, 2010, on scientific integrity. It addresses how VA ensures quality science in its methods, review, policy application, and...: Background The Presidential Memorandum on Scientific Integrity and the Office of Science and Technology...

Ensuring Data Quality in Extension Research and Evaluation Studies

ERIC Educational Resources Information Center

Radhakrishna, Rama; Tobin, Daniel; Brennan, Mark; Thomson, Joan

2012-01-01

This article presents a checklist as a guide for Extension professionals to use in research and evaluation studies they carry out. A total of 40 statements grouped under eight data quality components--relevance, objectivity, validity, reliability, integrity, generalizability, completeness, and utility--are identified to ensure that research…

Scientific integrity memorandum

NASA Astrophysics Data System (ADS)

Showstack, Randy

2009-03-01

U.S. President Barack Obama signed a presidential memorandum on 9 March to help restore scientific integrity in government decision making. The memorandum directs the White House Office of Science and Technology Policy to develop a strategy within 120 days that ensures that "the selection of scientists and technology professionals for science and technology positions in the executive branch is based on those individuals' scientific and technological knowledge, credentials, and experience; agencies make available to the public the scientific or technological findings or conclusions considered or relied upon in policy decisions; agencies use scientific and technological information that has been subject to well-established scientific processes such as peer review; and agencies have appropriate rules and procedures to ensure the integrity of the scientific process within the agency, including whistleblower protection."

Breast Imaging: The Face of Imaging 3.0.

PubMed

Mayo, Ray Cody; Parikh, Jay R

2016-08-01

In preparation for impending changes to the health care delivery and reimbursement models, the ACR has provided a roadmap for success via the Imaging 3.0 (®)platform. The authors illustrate how the field of breast imaging demonstrates the following Imaging 3.0 concepts: value, patient-centered care, clinical integration, structured reporting, outcome metrics, and radiology's role in the accountable care organization environment. Much of breast imaging's success may be adapted and adopted by other fields in radiology to ensure that all radiologists become more visible and provide the value sought by patients and payers. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.

KSC-04pd1428

NASA Image and Video Library

2004-07-07

KENNEDY SPACE CENTER, FLA. - - Workers in the Orbiter Processing Facility complete the installation of the Reinforced Carbon-Carbon panel on Discovery. The chin panel is the smile-shaped section of RCC directly below the nose cap that provides a thermal barrier during re-entry. The nose cap, with chin panel, was removed from the vehicle in the summer of 2003 and returned to the vendor, where it underwent numerous forms of Non-Destructive Evaluation. These tests included X-ray, ultrasound and eddy current to ensure its structural integrity prior to reinstallation. Discovery is designated as the Return to Flight vehicle for mission STS-114, no earlier than March 2005.

KSC-04pd1424

NASA Image and Video Library

2004-07-07

KENNEDY SPACE CENTER, FLA. - Workers in the Orbiter Processing Facility lift the Reinforced Carbon-Carbon (RCC) chin panel to install on Discovery. The chin panel is the smile-shaped section of RCC directly below the nose cap that provides a thermal barrier during re-entry. The nose cap, with chin panel, was removed from the vehicle in the summer of 2003 and returned to the vendor, where it underwent numerous forms of Non-Destructive Evaluation. These tests included X-ray, ultrasound and eddy current to ensure its structural integrity prior to reinstallation. Discovery is designated as the Return to Flight vehicle for mission STS-114, no earlier than March 2005.

KSC-04pd1425

NASA Image and Video Library

2004-07-07

KENNEDY SPACE CENTER, FLA. - Workers in the Orbiter Processing Facility lift the Reinforced Carbon-Carbon (RCC) chin panel into place on Discovery. The chin panel is the smile-shaped section of RCC directly below the nose cap that provides a thermal barrier during re-entry. The nose cap, with chin panel, was removed from the vehicle in the summer of 2003 and returned to the vendor, where it underwent numerous forms of Non-Destructive Evaluation. These tests included X-ray, ultrasound and eddy current to ensure its structural integrity prior to reinstallation. Discovery is designated as the Return to Flight vehicle for mission STS-114, no earlier than March 2005.

KSC-04pd1423

NASA Image and Video Library

2004-07-07

KENNEDY SPACE CENTER, FLA. - Workers in the Orbiter Processing Facility prepare the Reinforced Carbon-Carbon (RCC) chin panel to install on Discovery. The chin panel is the smile-shaped section of RCC directly below the nose cap that provides a thermal barrier during re-entry. The nose cap, with chin panel, was removed from the vehicle in the summer of 2003 and returned to the vendor, where it underwent numerous forms of Non-Destructive Evaluation. These tests included X-ray, ultrasound and eddy current to ensure its structural integrity prior to reinstallation. Discovery is designated as the Return to Flight vehicle for mission STS-114, no earlier than March 2005.

KSC-04pd1427

NASA Image and Video Library

2004-07-07

KENNEDY SPACE CENTER, FLA. - - Workers in the Orbiter Processing Facility check the placement of the Reinforced Carbon-Carbon chin panel on Discovery. The chin panel is the smile-shaped section of RCC directly below the nose cap that provides a thermal barrier during re-entry. The nose cap, with chin panel, was removed from the vehicle in the summer of 2003 and returned to the vendor, where it underwent numerous forms of Non-Destructive Evaluation. These tests included X-ray, ultrasound and eddy current to ensure its structural integrity prior to reinstallation. Discovery is designated as the Return to Flight vehicle for mission STS-114, no earlier than March 2005.

KSC-04pd1426

NASA Image and Video Library

2004-07-07

KENNEDY SPACE CENTER, FLA. - Workers in the Orbiter Processing Facility check the placement of the Reinforced Carbon-Carbon (RCC) chin panel on Discovery. . The chin panel is the smile-shaped section of RCC directly below the nose cap that provides a thermal barrier during re-entry. The nose cap, with chin panel, was removed from the vehicle in the summer of 2003 and returned to the vendor, where it underwent numerous forms of Non-Destructive Evaluation. These tests included X-ray, ultrasound and eddy current to ensure its structural integrity prior to reinstallation. Discovery is designated as the Return to Flight vehicle for mission STS-114, no earlier than March 2005.

Rethinking policy perspectives on childhood stunting: time to formulate a structural and multifactorial strategy.

PubMed

Subramanian, S V; Mejía-Guevara, Iván; Krishna, Aditi

2016-05-01

Stunting and chronic undernutrition among children in South Asia remain a major unresolved global health issue. There are compelling intrinsic and moral reasons to ensure that children attain their optimal growth potential facilitated via promotion of healthy living conditions. Investments in efforts to ensure that children's growth is not faltered also have substantial instrumental benefits in terms of cognitive and economic development. Using the case of India, we critique three prevailing approaches to reducing undernutrition among children: an over-reliance on macroeconomic growth as a potent policy instrument, a disproportionate focus on interpreting undernutrition as a demand-side problem and an over-reliance on unintegrated single-factorial (one at a time) approaches to policy and research. Using existing evidence, we develop a case for support-led policy approach with a focus on integrated and structural factors to addressing the problem of undernutrition among children in India. Key messages Eliminating child undernutrition is important from an intrinsic perspective and offers considerable instrumental benefits to individual and society. Evidence suggests that an exclusive reliance on a growth-mediated strategy to eliminate stunting needs to be reconsidered, suggesting the need for a substantial support-led strategy. Interpreting and addressing undernutrition as a demand-side problem with proximal single-factorial interventions is futile. There is an urgent need to develop interventions that address the broader structural and upstream causes of child undernutrition. © 2016 The Authors. Maternal & Child Nutrition published by John Wiley & Sons Ltd.

Adaptive building skin structures

NASA Astrophysics Data System (ADS)

Del Grosso, A. E.; Basso, P.

2010-12-01

The concept of adaptive and morphing structures has gained considerable attention in the recent years in many fields of engineering. In civil engineering very few practical applications are reported to date however. Non-conventional structural concepts like deployable, inflatable and morphing structures may indeed provide innovative solutions to some of the problems that the construction industry is being called to face. To give some examples, searches for low-energy consumption or even energy-harvesting green buildings are amongst such problems. This paper first presents a review of the above problems and technologies, which shows how the solution to these problems requires a multidisciplinary approach, involving the integration of architectural and engineering disciplines. The discussion continues with the presentation of a possible application of two adaptive and dynamically morphing structures which are proposed for the realization of an acoustic envelope. The core of the two applications is the use of a novel optimization process which leads the search for optimal solutions by means of an evolutionary technique while the compatibility of the resulting configurations of the adaptive envelope is ensured by the virtual force density method.

Translational neurocardiology: preclinical models and cardioneural integrative aspects.

PubMed

Ardell, J L; Andresen, M C; Armour, J A; Billman, G E; Chen, P-S; Foreman, R D; Herring, N; O'Leary, D S; Sabbah, H N; Schultz, H D; Sunagawa, K; Zucker, I H

2016-07-15

Neuronal elements distributed throughout the cardiac nervous system, from the level of the insular cortex to the intrinsic cardiac nervous system, are in constant communication with one another to ensure that cardiac output matches the dynamic process of regional blood flow demand. Neural elements in their various 'levels' become differentially recruited in the transduction of sensory inputs arising from the heart, major vessels, other visceral organs and somatic structures to optimize neuronal coordination of regional cardiac function. This White Paper will review the relevant aspects of the structural and functional organization for autonomic control of the heart in normal conditions, how these systems remodel/adapt during cardiac disease, and finally how such knowledge can be leveraged in the evolving realm of autonomic regulation therapy for cardiac therapeutics. © 2016 The Authors. The Journal of Physiology © 2016 The Physiological Society.

Intelligent Propulsion System Foundation Technology: Summary of Research

NASA Technical Reports Server (NTRS)

2008-01-01

The purpose of this cooperative agreement was to develop a foundation of intelligent propulsion technologies for NASA and industry that will have an impact on safety, noise, emissions, and cost. These intelligent engine technologies included sensors, electronics, communications, control logic, actuators, smart materials and structures, and system studies. Furthermore, this cooperative agreement helped prepare future graduates to develop the revolutionary intelligent propulsion technologies that will be needed to ensure pre-eminence of the U.S. aerospace industry. This Propulsion 21 - Phase 11 program consisted of four primary research areas and associated work elements at Ohio universities: 1.0 Turbine Engine Prognostics, 2.0 Active Controls for Emissions and Noise Reduction, 3.0 Active Structural Controls and Performance, and 4.0 System Studies and Integration. Phase l, which was conducted during the period August 1, 2003, through September 30, 2004, has been reported separately.

Arch-bridge Lift Process Monitoring by Using Packaged Optical Fibre Strain Sensors with Temperature Compensation

NASA Astrophysics Data System (ADS)

Mokhtar, M. R.; Sun, T.; Grattan, K. T. V.; Owens, K.; Kwasny, J.; Taylor, S. E.; Basheer, P. A. M.; Cleland, D.; Bai, Y.; Sonebi, M.; Davis, G.; Gupta, A.; Hogg, I.; Bell, B.; Doherty, W.; McKeague, S.; Moore, D.; Greeves, K.

2011-08-01

This paper presents a novel sensor design and packaging, specifically developed to allow fibre grating-based sensors to be used in harsh, in-the-field measurement conditions for accurate strain measurement, with full temperature compensation. After these sensors are carefully packaged and calibrated in the laboratory, they are installed onto the paragrid of a set of flat-packed concrete units, created specifically for forming a small-scale, lightweight and inexpensive flexi-arch bridge. During the arch-bridge lifting process, the sensors are used for real-time strain measurements to ensure the quality of the construction. During the work done, the sensors have demonstrated enhanced resilience when embedded in concrete structures, providing accurate and consistent strain measurements during the whole installation process and beyond into monitoring the integrity and use of the structure.

Challenges in the management of support and care programmes for child-headed households in South Africa.

PubMed

Human, Sarie P; van Rensburg, Gisela H

2011-10-01

The present study reports on data collected in a larger study on 'A situational analysis of child-headed households in South Africa'. The purpose of this study was to explore the management and control of available and required services, resources and safety nets for children in child-headed households. The significance of having a better understanding of the challenges, limitations but importance for government structures to manage and control programmes will enhance the implementation and maintenance of focused and sustainable support structures and programmes which will effectively address the needs of child-headed households. An exploratory and descriptive, quantitative survey was conducted to provide information on government structures at a national level and the nine provinces in South Africa. The population consisted of the Departments of Social Development, Education, Health and Agriculture, at both national and provincial levels. The main findings included a lack of clarity regarding the concept and definition of a child-headed household, lack of empirical data, a diversity of needs and challenges in terms of location and geographical distribution of available infrastructure and support systems; programmes that are not inclusive and integrated; and contradictions in the stipulations and implementation of existing policies and capacity and human resources shortages. It was concluded that the magnitude, uniqueness and complexity of the phenomenon necessitate effective and sound scientific management principles. This is achieved by providing legal clarity of the concept; developing relevant policies and ensuring effective implementation thereof; rigorous monitoring and evaluation based on comprehensive empirical data; and protecting the rights and safety of these children and ensuring an enabling environment for all stakeholders to address needs and challenges. The role of the nurse manager is to ensure a holistic approach to children living in child-headed households by acting as a facilitator, advocate, leader, coordinator and consultant. © 2011 Blackwell Publishing Ltd.

Alternative occupied volume integrity (OVI) tests and analyses.

DOT National Transportation Integrated Search

2013-10-01

FRA, supported by the Volpe Center, conducted research on alternative methods of evaluating occupied volume integrity (OVI) in passenger railcars. Guided by this research, an alternative methodology for evaluating OVI that ensures an equivalent or gr...

EPA Science Matters Newsletter: Volume 1, Number 3

EPA Pesticide Factsheets

The term 'scientific integrity' is often used to describe an essential pillar of our work. It reflects our understanding that sound science is an irreplaceable necessity in ensuring the integrity of our actions and our decisions.

EPA Science Matters Newsletter: Volume 1, Number 3

EPA Pesticide Factsheets

2017-02-14

The term 'scientific integrity' is often used to describe an essential pillar of our work. It reflects our understanding that sound science is an irreplaceable necessity in ensuring the integrity of our actions and our decisions.

Principles of Sociology in Systems Engineering

NASA Technical Reports Server (NTRS)

Watson, Michael D.; Andrews, James G.; Larsen, Jordan A.

2017-01-01

Systems engineering involves both the integration of the system and the integration of the disciplines which develop and operate the system. Integrating the disciplines is a sociological effort to bring together different groups, often with different terminology, to achieve a common goal, the system. The focus for the systems engineer is information flow through the organization, between the disciplines, to ensure the system is developed and operated with all relevant information informing system decisions. Robert K. Merton studied the sociological principles of the sciences and the sociological principles he developed apply to systems engineering. Concepts such as specification of ignorance, common terminology, opportunity structures, role-sets, and the reclama (reconsideration) process are all important sociological approaches that should be employed by the systems engineer. In bringing the disciplines together, the systems engineer must also be wary of social ambivalence, social anomie, social dysfunction, insider-outsider behavior, unintended consequences, and the self-fulfilling prophecy. These sociological principles provide the systems engineer with key approaches to manage the information flow through the organization as the disciplines are integrated and share their information. This also helps identify key sociological barriers to information flow through the organization. This paper will discuss this theoretical basis for the application of sociological principles to systems engineering.

A symplectic integration method for elastic filaments

NASA Astrophysics Data System (ADS)

Ladd, Tony; Misra, Gaurav

2009-03-01

Elastic rods are a ubiquitous coarse-grained model of semi-flexible biopolymers such as DNA, actin, and microtubules. The Worm-Like Chain (WLC) is the standard numerical model for semi-flexible polymers, but it is only a linearized approximation to the dynamics of an elastic rod, valid for small deflections; typically the torsional motion is neglected as well. In the standard finite-difference and finite-element formulations of an elastic rod, the continuum equations of motion are discretized in space and time, but it is then difficult to ensure that the Hamiltonian structure of the exact equations is preserved. Here we discretize the Hamiltonian itself, expressed as a line integral over the contour of the filament. This discrete representation of the continuum filament can then be integrated by one of the explicit symplectic integrators frequently used in molecular dynamics. The model systematically approximates the continuum partial differential equations, but has the same level of computational complexity as molecular dynamics and is constraint free. Numerical tests show that the algorithm is much more stable than a finite-difference formulation and can be used for high aspect ratio filaments, such as actin. We present numerical results for the deterministic and stochastic motion of single filaments.

Integrated waste management for rural development in Egypt.

PubMed

Shehata, S M; El Shimi, S A; Elkattan, M H; Ali, B E; El-Housseini, M; El Sayad, S A; Mahmoud, M S; Zaki, A M; Hamdi, Y A; El-Nawawy, A S

2004-01-01

Rural areas generate a large amount of plant and animal residues that can be recycled and utilized instead of relocation and/or burning. This will lead to increasing the benefits from agricultural sector in rural communities and ensuring a better environment. To increase the economic output and environmental benefits of recycling agricultural residues, integrated system should be considered, e.g., energy--compost-recycled water system; composting--co-composting system; food-feed compost system, ensilage of crop residues. The present work was a pilot study for optimizing integrated systems for bioconversion agricultural residues completed by establishing a Training Center for Recycling Agricultural Residues (TCRAR) thereby ensuring the dissemination of the technical, environmental, and socioeconomic aspects to farmers, live stock producers, extensions service staff, and private sector. Three integrated subsystems for bioconversion of agricultural residues were developed. They were based on (i) energy--manure-recycled water system, (ii) composting and co-composting system, and (iii) food-feed/compost system.

Communication as a mechanism for cultural integration.

PubMed

Backstrom, Tomas; Hagstrom, Tom; Goransson, Susanna

2013-01-01

Providing autonomy for employees ensures innovation competence if balanced by integration into the organization. The aim of this article is to study processes leading to the integration of employees into the company culture. The two research questions are: What makes the culture of a work group similar to the company culture? How is a work group culture constructed? Theories that are employed concern culture as an organizing structure emerging in the interaction, company culture as a way to exert control, and social networks as a way to describe the interaction. Empirical data come from a merchant bank from which 105 respondents from ten work groups answered questions about their communication and their integration into the company culture. The results show that the sub-culture of the group emerges in communication between members of the group. There seems to be a self-reinforcing spiral between collegial talk, especially about goals, plans and changes at the work place, and cultural integration. All members of a group should be included in this communication to create a strong culture. The value system of the supervisor strongly influences the sub-culture of the work group. Appointing supervisors with values that correspond to the company culture and provide for employee communications is thus central for organizations using culture as a tool for control.

Assessment of the core and support functions of the Integrated Disease Surveillance system in Maharashtra, India

PubMed Central

2013-01-01

Background Monitoring the progress of the Integrated Disease Surveillance (IDS) strategy is an important component to ensure its sustainability in the state of Maharashtra in India. The purpose of the study was to document the baseline performance of the system on its core and support functions and to understand the challenges for its transition from an externally funded “project” to a state owned surveillance “program”. Methods Multi-centre, retrospective cross-sectional evaluation study to assess the structure, core and support surveillance functions using modified WHO generic questionnaires. All 34 districts in the state and randomly identified 46 facilities and 25 labs were included in the study. Results Case definitions were rarely used at the periphery. Limited laboratory capacity at all levels compromised case and outbreak confirmation. Only 53% districts could confirm all priority diseases. Stool sample processing was the weakest at the periphery. Availability of transport media, trained staff, and rapid diagnostic tests were main challenges at the periphery. Data analysis was weak at both district and facility levels. Outbreak thresholds were better understood at facility level (59%) than at the district (18%). None of the outbreak indicator targets were met and submission of final outbreak report was the weakest. Feedback and training was significantly better (p < 0.0001) at district level (65%; 76%) than at facility level (15%; 37%). Supervision was better at the facility level (37%) than at district (18%) and so were coordination, communication and logistic resources. Contractual part time positions, administrative delays in recruitment, and vacancies (30%) were main human resource issues that hampered system performance. Conclusions Significant progress has been made in the core and support surveillance functions in Maharashtra, however some challenges exist. Support functions (laboratory, transport and communication equipment, training, supervision, human and other resources) are particularly weak at the district level. Structural integration and establishing permanent state and district surveillance officer positions will ensure leadership; improve performance; support continuity; and offer sustainability to the program. Institutionalizing the integrated disease surveillance strategy through skills based personnel development and infrastructure strengthening at district levels is the only way to avoid it from ending up isolated! Improving surveillance quality should be the next on agenda for the state. PMID:23764137

Preliminary analysis of an integrated logistics system for OSSA payloads. Volume 2: OSSA integrated logistics support strategy

NASA Technical Reports Server (NTRS)

Palguta, T.; Bradley, W.; Stockton, T.

1988-01-01

The purpose is to outline an Office of Space Science and Applications (OSSA) integrated logistics support strategy that will ensure effective logistics support of OSSA payloads at an affordable life-cycle cost. Program objectives, organizational relationships, and implementation of the logistics strategy are discussed.

An integrated ball projection technology for the study of dynamic interceptive actions.

PubMed

Stone, J A; Panchuk, D; Davids, K; North, J S; Fairweather, I; Maynard, I W

2014-12-01

Dynamic interceptive actions, such as catching or hitting a ball, are important task vehicles for investigating the complex relationship between cognition, perception, and action in performance environments. Representative experimental designs have become more important recently, highlighting the need for research methods to ensure that the coupling of information and movement is faithfully maintained. However, retaining representative design while ensuring systematic control of experimental variables is challenging, due to the traditional tendency to employ methods that typically involve use of reductionist motor responses such as buttonpressing or micromovements. Here, we outline the methodology behind a custom-built, integrated ball projection technology that allows images of advanced visual information to be synchronized with ball projection. This integrated technology supports the controlled presentation of visual information to participants while they perform dynamic interceptive actions. We discuss theoretical ideas behind the integration of hardware and software, along with practical issues resolved in technological design, and emphasize how the system can be integrated with emerging developments such as mixed reality environments. We conclude by considering future developments and applications of the integrated projection technology for research in human movement behaviors.

OVERVIEW OF ENHANCED HANFORD SINGLE-SHELL TANK (SST) INTEGRITY PROJECT - 12128

DOE Office of Scientific and Technical Information (OSTI.GOV)

VENETZ TJ; BOOMER KD; WASHENFELDER DJ

2012-01-25

To improve the understanding of the single-shell tanks integrity, Washington River Protection Solutions, LLC, the USDOE Hanford Site tank contractor, developed an enhanced Single-Shell Tank (SST) Integrity Project in 2009. An expert panel on SST integrity, consisting of various subject matters experts in industry and academia, was created to provide recommendations supporting the development of the project. This panel developed 33 recommendations in four main areas of interest: structural integrity, liner degradation, leak integrity and prevention, and mitigation of contamination migration, Seventeen of these recommendations were used to develop the basis for the M-45-10-1 Change Package for the Hanford Federalmore » Agreement and Compliance Order, which is also known as the Tri-Party Agreement. The change package identified two phases of work for SST integrity. The initial phase has been focused on efforts to envelope the integrity of the tanks. The initial phase was divided into two primary areas of investigation: structural integrity and leak integrity. If necessary based on the outcome from the initial work, a second phase would be focused on further definition of the integrity of the concrete and liners. Combined these two phases are designed to support the formal integrity assessment of the Hanford SSTs in 2018 by Independent Qualified Registered Engineer. The work to further define the DOE's understanding of the structural integrity SSTs involves preparing a modern Analysis of Record using a finite element analysis program. Structural analyses of the SSTs have been conducted since 1957, but these analyses used analog calculation, less rigorous models, or focused on individual structures. As such, an integrated understanding of all of the SSTs has not been developed to modern expectations. In support of this effort, other milestones will address the visual inspection of the tank concrete and the collection of concrete core samples from the tanks for analysis of current mechanics properties. The work on the liner leak integrity has examined the leaks from 23 tanks with liner failures. Individual leak assessments are being developed for each tank to identify the leak cause and location. Also a common cause study is being performed to take the data from individual tanks to look for trends in the failure. Supporting this work is an assessment of the leak rate from tanks at both Hanford and the Savannah River Site and a new method to locate leak sites in tank liner using ionic conductivity. A separate activity is being conducted to examine the propensity for corrosion in select single shell tanks with aggressive waste layers. The work for these two main efforts will provide the basis for the phase two planning. If the margins identified aren't sufficient to ensure the integrity through the life of the mission, phase two would focus on activities to further enhance the understanding of tank integrity. Also coincident with any phase-two work would be the integrity analysis for the tanks, which would be complete in 2018. With delays in the completion of waste treatment facilities at Hanford, greater reliance on safe, continued storage of waste in the single shell tanks is increased in importance. The goal of integrity assessment would provide basis to continue SST activities till the end of the treatment mission.« less

Training, Simulation, the Learning Curve, and How to Reduce Complications in Urology.

PubMed

Brunckhorst, Oliver; Volpe, Alessandro; van der Poel, Henk; Mottrie, Alexander; Ahmed, Kamran

2016-04-01

Urology is at the forefront of minimally invasive surgery to a great extent. These procedures produce additional learning challenges and possess a steep initial learning curve. Training and assessment methods in surgical specialties such as urology are known to lack clear structure and often rely on differing operative flow experienced by individuals and institutions. This article aims to assess current urology training modalities, to identify the role of simulation within urology, to define and identify the learning curves for various urologic procedures, and to discuss ways to decrease complications in the context of training. A narrative review of the literature was conducted through December 2015 using the PubMed/Medline, Embase, and Cochrane Library databases. Evidence of the validity of training methods in urology includes observation of a procedure, mentorship and fellowship, e-learning, and simulation-based training. Learning curves for various urologic procedures have been recommended based on the available literature. The importance of structured training pathways is highlighted, with integration of modular training to ensure patient safety. Valid training pathways are available in urology. The aim in urology training should be to combine all of the available evidence to produce procedure-specific curricula that utilise the vast array of training methods available to ensure that we continue to improve patient outcomes and reduce complications. The current evidence for different training methods available in urology, including simulation-based training, was reviewed, and the learning curves for various urologic procedures were critically analysed. Based on the evidence, future pathways for urology curricula have been suggested to ensure that patient safety is improved. Copyright © 2016 European Association of Urology. Published by Elsevier B.V. All rights reserved.

Integrated urban water planning: big picture planning is good for the wallet and the environment.

PubMed

Anderson, J; Iyaduri, R

2003-01-01

The demands on governments and local authorities are changing in response to community expectations for environmentally sustainable outcomes. To reverse declining water quality in rivers and ensure sustainable use in the 21st century, the State Government in New South Wales has introduced a package of Water Reforms. The introduction of integrated water, sewerage and drainage planning is one of the Water Reform initiatives. Traditionally, government and local authorities have managed their water supply, sewerage and stormwater drainage systems as separate entities. Integrated urban water planning is a structured planning process to evaluate concurrently the opportunities to improve the management of water, sewerage and drainage services within an urban area in ways which are consistent with broader catchment and river management objectives. The New South Wales Department of Land & Water Conservation (DLWC) has developed an integrated urban water planning process through a number of recent pilot studies. The process links urban water management objectives to overall catchment and river management objectives. DLWC is currently developing a set of guidelines for integrated urban water plans. DLWC has developed the Integrated Urban Water Planning methodology through three pilot studies in the New South Wales towns of Finley, Goulburn and Bombala. The pilot studies have shown that an integrated approach to water, sewerage and stormwater planning can identify opportunities that are not apparent when separate strategies are developed for each service. The result is better-integrated, more sustainable solutions, and substantial cost savings for local communities.

DSSTOX MASTER STRUCTURE-INDEX FILE: SDF FILE AND ...

EPA Pesticide Factsheets

The DSSTox Master Structure-Index File serves to consolidate, manage, and ensure quality and uniformity of the chemical and substance information spanning all DSSTox Structure Data Files, including those in development but not yet published separately on this website. The DSSTox Master Structure-Index File serves to consolidate, manage, and ensure quality and uniformity of the chemical and substance information spanning all DSSTox Structure Data Files, including those in development but not yet published separately on this website.

A Study to Develop a Timeline for Sequencing the Major Transitional Tasks in the Fort Sill Hospital Transition Plan

DTIC Science & Technology

1988-07-01

efforts. 7. Ensure that transition planning materials and manuals are prepared. 8. Ensure proper orientation of staff. 9. Ensure all involved parties...software package which will integrate with the project methodology: User’s manual that is "user friendly". Tutorial with sample data for learning the...program. Menus for direction and assistance. On-line help to avoid constant referral to the manual . Technical support available via telephone. Demo

Sputtered Pd as hydrogen storage for a chip-integrated microenergy system.

PubMed

Slavcheva, E; Ganske, G; Schnakenberg, U

2014-01-01

The work presents a research on preparation and physical and electrochemical characterisation of dc magnetron sputtered Pd films envisaged for application as hydrogen storage in a chip-integrated hydrogen microenergy system. The influence of the changes in the sputtering pressure on the surface structure, morphology, and roughness was analysed by X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AMF). The electrochemical activity towards hydrogen adsorption/desorption and formation of PdH were investigated in 0.5 M H2SO4 using the methods of cyclic voltammetry and galvanostatic polarisation. The changes in the electrical properties of the films as a function of the sputtering pressure and the level of hydrogenation were evaluated before and immediately after the electrochemical charging tests, using a four-probe technique. The research resulted in establishment of optimal sputter regime, ensuring fully reproducible Pd layers with highly developed surface, moderate porosity, and mechanical stability. Selected samples were integrated as hydrogen storage in a newly developed unitized microenergy system and tested in charging (water electrolysis) and discharging (fuel cell) operative mode at ambient conditions demonstrating a stable recycling performance.

Bridging the Gap between Human Judgment and Automated Reasoning in Predictive Analytics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sanfilippo, Antonio P.; Riensche, Roderick M.; Unwin, Stephen D.

2010-06-07

Events occur daily that impact the health, security and sustainable growth of our society. If we are to address the challenges that emerge from these events, anticipatory reasoning has to become an everyday activity. Strong advances have been made in using integrated modeling for analysis and decision making. However, a wider impact of predictive analytics is currently hindered by the lack of systematic methods for integrating predictive inferences from computer models with human judgment. In this paper, we present a predictive analytics approach that supports anticipatory analysis and decision-making through a concerted reasoning effort that interleaves human judgment and automatedmore » inferences. We describe a systematic methodology for integrating modeling algorithms within a serious gaming environment in which role-playing by human agents provides updates to model nodes and the ensuing model outcomes in turn influence the behavior of the human players. The approach ensures a strong functional partnership between human players and computer models while maintaining a high degree of independence and greatly facilitating the connection between model and game structures.« less

Evaluation of an Integrated Framework for Biodiversity with a New Metric for Functional Dispersion

PubMed Central

Presley, Steven J.; Scheiner, Samuel M.; Willig, Michael R.

2014-01-01

Growing interest in understanding ecological patterns from phylogenetic and functional perspectives has driven the development of metrics that capture variation in evolutionary histories or ecological functions of species. Recently, an integrated framework based on Hill numbers was developed that measures three dimensions of biodiversity based on abundance, phylogeny and function of species. This framework is highly flexible, allowing comparison of those diversity dimensions, including different aspects of a single dimension and their integration into a single measure. The behavior of those metrics with regard to variation in data structure has not been explored in detail, yet is critical for ensuring an appropriate match between the concept and its measurement. We evaluated how each metric responds to particular data structures and developed a new metric for functional biodiversity. The phylogenetic metric is sensitive to variation in the topology of phylogenetic trees, including variation in the relative lengths of basal, internal and terminal branches. In contrast, the functional metric exhibited multiple shortcomings: (1) species that are functionally redundant contribute nothing to functional diversity and (2) a single highly distinct species causes functional diversity to approach the minimum possible value. We introduced an alternative, improved metric based on functional dispersion that solves both of these problems. In addition, the new metric exhibited more desirable behavior when based on multiple traits. PMID:25148103

Stakeholder experiences with general practice pharmacist services: a qualitative study.

PubMed

Tan, Edwin C K; Stewart, Kay; Elliott, Rohan A; George, Johnson

2013-09-11

To explore general practice staff, pharmacist and patient experiences with pharmacist services in Australian general practice clinics within the Pharmacists in Practice Study. Qualitative study. Two general practice clinics in Melbourne, Australia, in which pharmacists provided medication reviews, patient and staff education, medicines information and quality assurance services over a 6-month period. Patients, practice staff and pharmacists. Semi-structured telephone interviews with patients, focus groups with practice staff and semi-structured interviews and periodic narrative reports with practice pharmacists. Data were analysed thematically and theoretical frameworks used to explain the findings. 34 participants were recruited: 18 patients, 14 practice staff (9 general practitioners, 4 practice nurses, 1 practice manager) and 2 practice pharmacists. Five main themes emerged: environment; professional relationships and integration; pharmacist attributes; staff and patient benefits and logistical challenges. Participants reported that colocation and the interdisciplinary environment of general practice enabled better communication and collaboration compared to traditional community and consultant pharmacy services. Participants felt that pharmacists needed to possess certain attributes to ensure successful integration, including being personable and proactive. Attitudinal, professional and logistical barriers were identified but were able to be overcome. The findings were explained using D'Amour's structuration model of collaboration and Roger's diffusion of innovation theory. This is the first qualitative study to explore the experiences of general practice staff, pharmacists and patients on their interactions within the Australian general practice environment. Participants were receptive of colocated pharmacist services, and various barriers and facilitators to integration were identified. Future research should investigate the feasibility and sustainability of general practice pharmacist roles.

Effects of integrated watershed management on livestock water productivity in water scarce areas in Ethiopia

NASA Astrophysics Data System (ADS)

Descheemaeker, Katrien; Mapedza, Everisto; Amede, Tilahun; Ayalneh, Wagnew

In the water scarce Lenche Dima watershed in the northern Ethiopian highlands community based integrated watershed management was implemented to fight land degradation, raise agricultural productivity and improve farmers’ livelihoods. The effects of two interventions, namely exclosures and water harvesting structures, were assessed based on data from farmers’ interviews, measurements of feed biomass production, and estimates of energy production and requirements. Water used for livestock feed production was obtained through simple soil water balance modelling. By protecting 40% of the rangelands, the water productivity of the feed increased by about 20%. This indicated that exclosure establishment could lead to similar improvements in livestock water productivity (LWP, defined as the ratio of livestock benefits over the water used in producing these). Water harvesting structures ensured year-round water availability in the homestead, which resulted in less energy used for walking to drinking points. A considerable amount of energy was thus saved, which could be used for livestock production and improved animal health without additional water use. Besides restoring regulating and supporting ecosystem services, both interventions led to a more efficient use of the scarce water resources for biomass and livestock production.

Development of a 0.5m clear aperture Cassegrain type collimator telescope

NASA Astrophysics Data System (ADS)

Ekinci, Mustafa; Selimoǧlu, Özgür

2016-07-01

Collimator is an optical instrument used to evaluate performance of high precision instruments, especially space-born high resolution telescopes. Optical quality of the collimator telescope needs to be better than the instrument to be measured. This requirement leads collimator telescope to be a very precise instrument with high quality mirrors and a stable structure to keep it operational under specified conditions. In order to achieve precision requirements and to ensure repeatability of the mounts for polishing and metrology, opto-mechanical principles are applied to mirror mounts. Finite Element Method is utilized to simulate gravity effects, integration errors and temperature variations. Finite element analyses results of deformed optical surfaces are imported to optical domain by using Zernike polynomials to evaluate the design against specified WFE requirements. Both mirrors are aspheric and made from Zerodur for its stability and near zero CTE, M1 is further light-weighted. Optical quality measurements of the mirrors are achieved by using custom made CGHs on an interferometric test setup. Spider of the Cassegrain collimator telescope has a flexural adjustment mechanism driven by precise micrometers to overcome tilt errors originating from finite stiffness of the structure and integration errors. Collimator telescope is assembled and alignment methods are proposed.

Full-Scaled Advanced Systems Testbed: Ensuring Success of Adaptive Control Research Through Project Lifecycle Risk Mitigation

NASA Technical Reports Server (NTRS)

Pavlock, Kate M.

2011-01-01

The National Aeronautics and Space Administration's Dryden Flight Research Center completed flight testing of adaptive controls research on the Full-Scale Advance Systems Testbed (FAST) in January of 2011. The research addressed technical challenges involved with reducing risk in an increasingly complex and dynamic national airspace. Specific challenges lie with the development of validated, multidisciplinary, integrated aircraft control design tools and techniques to enable safe flight in the presence of adverse conditions such as structural damage, control surface failures, or aerodynamic upsets. The testbed is an F-18 aircraft serving as a full-scale vehicle to test and validate adaptive flight control research and lends a significant confidence to the development, maturation, and acceptance process of incorporating adaptive control laws into follow-on research and the operational environment. The experimental systems integrated into FAST were designed to allow for flexible yet safe flight test evaluation and validation of modern adaptive control technologies and revolve around two major hardware upgrades: the modification of Production Support Flight Control Computers (PSFCC) and integration of two, fourth-generation Airborne Research Test Systems (ARTS). Post-hardware integration verification and validation provided the foundation for safe flight test of Nonlinear Dynamic Inversion and Model Reference Aircraft Control adaptive control law experiments. To ensure success of flight in terms of cost, schedule, and test results, emphasis on risk management was incorporated into early stages of design and flight test planning and continued through the execution of each flight test mission. Specific consideration was made to incorporate safety features within the hardware and software to alleviate user demands as well as into test processes and training to reduce human factor impacts to safe and successful flight test. This paper describes the research configuration, experiment functionality, overall risk mitigation, flight test approach and results, and lessons learned of adaptive controls research of the Full-Scale Advanced Systems Testbed.

Pilot study on rugged fiber optic brillouin sensors for large-strain measurements to ensure the safety of transportation structures.

DOT National Transportation Integrated Search

2012-07-01

Brillouin-scattering Optical Time Domain Reflectometry (BOTDR) is a viable technology for simultaneous, distributed : strain and temperature measurements for miles-long transportation structures. It is a promising tool to ensure the smooth : operatio...

Solar plus: Optimization of distributed solar PV through battery storage and dispatchable load in residential buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Shaughnessy, Eric; Cutler, Dylan; Ardani, Kristen

As utility electricity rates evolve, pairing solar photovoltaic (PV) systems with battery storage has potential to ensure the value proposition of residential solar by mitigating economic uncertainty. In addition to batteries, load control technologies can reshape customer load profiles to optimize PV system use. The combination of PV, energy storage, and load control provides an integrated approach to PV deployment, which we call 'solar plus'. The U.S. National Renewable Energy Laboratory's Renewable Energy Optimization (REopt) model is utilized to evaluate cost-optimal technology selection, sizing, and dispatch in residential buildings under a variety of rate structures and locations. The REopt modelmore » is extended to include a controllable or 'smart' domestic hot water heater model and smart air conditioner model. We find that the solar plus approach improves end user economics across a variety of rate structures - especially those that are challenging for PV - including lower grid export rates, non-coincident time-of-use structures, and demand charges.« less

Solar plus: Optimization of distributed solar PV through battery storage and dispatchable load in residential buildings

DOE PAGES

O'Shaughnessy, Eric; Cutler, Dylan; Ardani, Kristen; ...

2018-01-11

As utility electricity rates evolve, pairing solar photovoltaic (PV) systems with battery storage has potential to ensure the value proposition of residential solar by mitigating economic uncertainty. In addition to batteries, load control technologies can reshape customer load profiles to optimize PV system use. The combination of PV, energy storage, and load control provides an integrated approach to PV deployment, which we call 'solar plus'. The U.S. National Renewable Energy Laboratory's Renewable Energy Optimization (REopt) model is utilized to evaluate cost-optimal technology selection, sizing, and dispatch in residential buildings under a variety of rate structures and locations. The REopt modelmore » is extended to include a controllable or 'smart' domestic hot water heater model and smart air conditioner model. We find that the solar plus approach improves end user economics across a variety of rate structures - especially those that are challenging for PV - including lower grid export rates, non-coincident time-of-use structures, and demand charges.« less

Determination of pore size distributions of porous chromatographic adsorbents by inverse size-exclusion chromatography.

PubMed

Yao, Yan; Lenhoff, Abraham M

2004-05-28

The macroscopic properties of porous chromatographic adsorbents are directly influenced by the pore structure, with the pore size distribution (PSD) playing a major role beyond simply the mean pore size. Inverse size-exclusion chromatography (ISEC), a widely used chromatographic method for determining the PSD of porous media, provides more relevant information on liquid chromatographic materials in situ than traditional methods, such as gas sorption and mercury intrusion. The fundamentals and applications of ISEC in the characterization of the pore structure are reviewed. The description of the probe solutes and the pore space, as well as theoretical models for deriving the PSD from solute partitioning behavior, are discussed. Precautions to ensure integrity of the experiments are also outlined, including accounting for probe polydispersity and minimization of solute-adsorbent interactions. The results that emerge are necessarily model-dependent, but ISEC nonetheless represents a powerful and non-destructive source of quantitative pore structure information that can help to elucidate chromatographic performance observations covering both retention and rate aspects.

Mechanical Characteristics of SiC Coating Layer in TRISO Fuel Particles

DOE Office of Scientific and Technical Information (OSTI.GOV)

P. Hosemann; J. N. Martos; D. Frazer

2013-11-01

Tristructural isotropic (TRISO) particles are considered as advanced fuel forms for a variety of fission platforms. While these fuel structures have been tested and deployed in reactors, the mechanical properties of these structures as a function of production parameters need to be investigated in order to ensure their reliability during service. Nanoindentation techniques, indentation crack testing, and half sphere crush testing were utilized in order to evaluate the integrity of the SiC coating layer that is meant to prevent fission product release in the coated particle fuel form. The results are complimented by scanning electron microscopy (SEM) of the grainmore » structure that is subject to change as a function of processing parameters and can alter the mechanical properties such as hardness, elastic modulus, fracture toughness and fracture strength. Through utilization of these advanced techniques, subtle differences in mechanical properties that can be important for in-pile fuel performance can be distinguished and optimized in iteration with processing science of coated fuel particle production.« less

Strength, functionality and beauty of university buildings in earthquake-prone countries

PubMed Central

WADA, Akira

2018-01-01

Strength, functionality and beauty are the three qualities identifying well-designed architecture. For buildings in earthquake-prone countries such as Japan, emphasis on seismic safety frequently leads to the sacrifice of functionality and beauty. Therefore, it is important to develop new structural technologies that can ensure the seismic performance of a building without hampering the pursuit of functionality and beauty. The moment-resisting frame structures widely used for buildings in Japan are likely to experience weak-story collapse. Pin-supported walls, which can effectively enhance the structural story-by-story integrity of a building, were introduced to prevent such an unfavorable failure pattern in the seismic retrofit of an eleven-story building on a university campus in Tokyo, while also greatly aesthetically enhancing the façade of the building. The slight damage observed and monitoring records of the retrofitted building during the 2011 Tohoku earthquake in Japan demonstrate that the pin-supported walls worked as intended, protecting the building and guaranteeing the safety of its occupants during the earthquake. PMID:29434079

Operational management of offshore energy assets

NASA Astrophysics Data System (ADS)

Kolios, A. J.; Martinez Luengo, M.

2016-02-01

Energy assets and especially those deployed offshore are subject to a variety of harsh operational and environmental conditions which lead to deterioration of their performance and structural capacity over time. The aim of reduction of CAPEX in new installations shifts focus to operational management to monitor and assess performance of critical assets ensuring their fitness for service throughout their service life and also to provide appropriate and effective information towards requalification or other end of life scenarios, optimizing the OPEX. Over the last decades, the offshore oil & gas industry has developed and applied various approaches in operational management of assets through Structural Health and Condition Monitoring (SHM/CM) systems which can be, at a certain level, transferable to offshore renewable installations. This paper aims to highlight the key differences between offshore oil & gas and renewable energy assets from a structural integrity and reliability perspective, provide a comprehensive overview of different approaches that are available and applicable, and distinguish the benefits of such systems in the efficient operation of offshore energy assets.

Detection of fastener loosening in simple lap joint based on ultrasonic wavefield imaging

NASA Astrophysics Data System (ADS)

Gooda Sahib, M. I.; Leong, S. J.; Chia, C. C.; Mustapha, F.

2017-12-01

Joints in aero-mechanical structures are critical elements that ensure the structural integrity but they are prone to damages. Inspection of such joints that have no prior baseline data is really challenging but it can be possibly done using the Ultrasonic Propagation Imager (UPI). The feasibility of applying UPI for detection of loosened fastener is investigated in this study. A simple lap joint specimen made by connecting two pieces of 2.5mm thick SAE304 stainless steel plates using five M6 screws and nuts has been used in this study. All fasteners are tightened to 10Nm but one of them is completely loosened to simulate the damage. The wavefield data is processed into ultrasonic wavefield propagation video and a series of spectral amplitude images. The spectral images showed noticeable amplitude difference at the loosened fastener, hence confirmed the feasibility of using UPI for structural joints inspection. A simple contrast maximization method is also introduced to improve the result.

Scalable File Systems for High Performance Computing Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brandt, S A

2007-10-03

Simulations of mode I interlaminar fracture toughness tests of a carbon-reinforced composite material (BMS 8-212) were conducted with LSDYNA. The fracture toughness tests were performed by U.C. Berkeley. The simulations were performed to investigate the validity and practicality of employing decohesive elements to represent interlaminar bond failures that are prevalent in carbon-fiber composite structure penetration events. The simulations employed a decohesive element formulation that was verified on a simple two element model before being employed to perform the full model simulations. Care was required during the simulations to ensure that the explicit time integration of LSDYNA duplicate the near steady-statemore » testing conditions. In general, this study validated the use of employing decohesive elements to represent the interlaminar bond failures seen in carbon-fiber composite structures, but the practicality of employing the elements to represent the bond failures seen in carbon-fiber composite structures during penetration events was not established.« less

Chiral higher spin theories and self-duality

NASA Astrophysics Data System (ADS)

Ponomarev, Dmitry

2017-12-01

We study recently proposed chiral higher spin theories — cubic theories of interacting massless higher spin fields in four-dimensional flat space. We show that they are naturally associated with gauge algebras, which manifest themselves in several related ways. Firstly, the chiral higher spin equations of motion can be reformulated as the self-dual Yang-Mills equations with the associated gauge algebras instead of the usual colour gauge algebra. We also demonstrate that the chiral higher spin field equations, similarly to the self-dual Yang-Mills equations, feature an infinite algebra of hidden symmetries, which ensures their integrability. Secondly, we show that off-shell amplitudes in chiral higher spin theories satisfy the generalised BCJ relations with the usual colour structure constants replaced by the structure constants of higher spin gauge algebras. We also propose generalised double copy procedures featuring higher spin theory amplitudes. Finally, using the light-cone deformation procedure we prove that the structure of the Lagrangian that leads to all these properties is universal and follows from Lorentz invariance.

49 CFR 1106.1 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-10-01

... TRANSPORTATION RULES OF PRACTICE PROCEDURES FOR SURFACE TRANSPORTATION BOARD CONSIDERATION OF SAFETY INTEGRATION.... This part is designed to ensure adequate and coordinated consideration of safety integration issues, by... subject to the Board's jurisdiction. It establishes the procedures by which the Board will consider safety...

49 CFR 1106.1 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-10-01

... TRANSPORTATION RULES OF PRACTICE PROCEDURES FOR SURFACE TRANSPORTATION BOARD CONSIDERATION OF SAFETY INTEGRATION.... This part is designed to ensure adequate and coordinated consideration of safety integration issues, by... subject to the Board's jurisdiction. It establishes the procedures by which the Board will consider safety...

49 CFR 1106.1 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-10-01

... TRANSPORTATION RULES OF PRACTICE PROCEDURES FOR SURFACE TRANSPORTATION BOARD CONSIDERATION OF SAFETY INTEGRATION.... This part is designed to ensure adequate and coordinated consideration of safety integration issues, by... subject to the Board's jurisdiction. It establishes the procedures by which the Board will consider safety...

49 CFR 1106.1 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-10-01

... TRANSPORTATION RULES OF PRACTICE PROCEDURES FOR SURFACE TRANSPORTATION BOARD CONSIDERATION OF SAFETY INTEGRATION.... This part is designed to ensure adequate and coordinated consideration of safety integration issues, by... subject to the Board's jurisdiction. It establishes the procedures by which the Board will consider safety...

42 CFR 493.1232 - Standard: Specimen identification and integrity.

Code of Federal Regulations, 2011 CFR

2011-10-01

... AND HUMAN SERVICES (CONTINUED) STANDARDS AND CERTIFICATION LABORATORY REQUIREMENTS Quality System for Nonwaived Testing General Laboratory Systems § 493.1232 Standard: Specimen identification and integrity. The laboratory must establish and follow written policies and procedures that ensure positive identification and...

The Use of Educational Technology Integration by Special Education Teachers in Rural Schools in South Carolina

ERIC Educational Resources Information Center

Byrd-Jones, Shannon L.

2011-01-01

Effective professional development training is essential to ensuring full technology integration in all classrooms by all teachers on a regular basis. Technology integration can greatly enhance the learning of all students. In particular students with disabilities and special needs benefit a great deal from the use of technology during…

Integrating Technology into the Online Classroom through Collaboration to Increase Student Motivation

ERIC Educational Resources Information Center

Dyer, Thomas; Larson, Elizabeth; Steele, John; Holbeck, Rick

2015-01-01

Technology is one of the most important components in the future of online learning. Instructors in online classes should lead the charge of innovation and integration of technology into the online classroom to ensure that students achieve the best learning outcomes. This article chronicles a theoretical model towards integrating technology as a…

Digital Authenticity and Integrity: Digital Cultural Heritage Documents as Research Resources

ERIC Educational Resources Information Center

Bradley; Rachael

2005-01-01

This article presents the results of a survey addressing methods of securing digital content and ensuring the content's authenticity and integrity, as well as the perceived importance of authenticity and integrity. The survey was sent to 40 digital repositories in the United States and Canada between June 30 and July 19, 2003. Twenty-two…

One Man One Vote: Trust between the Electorate, the Establishment, and Voting Technology

ERIC Educational Resources Information Center

Robertson, Laurie

2006-01-01

Historically any U.S. voting technology is burdened from its very inception with the expectation of technologically ensuring voting integrity. Voting is an officially sanctioned social activity/ritual in a technologically-focused nation, so U.S. voters arrive at the polls expecting that voting technology will ensure that their vote "counts. But no…

NHEXAS PHASE I ARIZONA STUDY--STANDARD OPERATING PROCEDURE FOR FREEZER MAINTENANCE AND TEMPERATURE VERIFICATION FOR SAMPLE INTEGRITY (BCO-L-25.0)

EPA Science Inventory

The purpose of this SOP is to ensure suitable temperature maintenance of freezers used for storage of samples. This procedure was followed to ensure consistent data retrieval during the Arizona NHEXAS project and the "Border" study. Keywords: freezers; operation.

The National H...

Accurate macromolecular crystallographic refinement: incorporation of the linear scaling, semiempirical quantum-mechanics program DivCon into the PHENIX refinement package

DOE Office of Scientific and Technical Information (OSTI.GOV)

Borbulevych, Oleg Y.; Plumley, Joshua A.; Martin, Roger I.

2014-05-01

Semiempirical quantum-chemical X-ray macromolecular refinement using the program DivCon integrated with PHENIX is described. Macromolecular crystallographic refinement relies on sometimes dubious stereochemical restraints and rudimentary energy functionals to ensure the correct geometry of the model of the macromolecule and any covalently bound ligand(s). The ligand stereochemical restraint file (CIF) requires a priori understanding of the ligand geometry within the active site, and creation of the CIF is often an error-prone process owing to the great variety of potential ligand chemistry and structure. Stereochemical restraints have been replaced with more robust functionals through the integration of the linear-scaling, semiempirical quantum-mechanics (SE-QM)more » program DivCon with the PHENIX X-ray refinement engine. The PHENIX/DivCon package has been thoroughly validated on a population of 50 protein–ligand Protein Data Bank (PDB) structures with a range of resolutions and chemistry. The PDB structures used for the validation were originally refined utilizing various refinement packages and were published within the past five years. PHENIX/DivCon does not utilize CIF(s), link restraints and other parameters for refinement and hence it does not make as many a priori assumptions about the model. Across the entire population, the method results in reasonable ligand geometries and low ligand strains, even when the original refinement exhibited difficulties, indicating that PHENIX/DivCon is applicable to both single-structure and high-throughput crystallography.« less

Human-In-The-Loop Simulation in Support of Long-Term Sustainability of Light Water Reactors

DOE PAGES

Hallbert, Bruce P

2015-01-01

Reliable instrumentation, information, and control systems technologies are essential to ensuring safe and efficient operation of the U.S. light water reactor (LWR) fleet. These technologies affect every aspect of nuclear power plant (NPP) and balance-of-plant operations. In 1997, the National Research Council conducted a study concerning the challenges involved in modernization of digital instrumentation and control systems in NPPs. Their findings identified the need for new II&C technology integration. The NPP owners and operators realize that this analog technology represents a significant challenge to sustaining the operation of the current fleet of NPPs. Beyond control systems, new technologies are neededmore » to monitor and characterize the effects of aging and degradation in critical areas of key structures, systems, and components. The objective of the efforts sponsored by the U.S. Department of Energy is to develop, demonstrate, and deploy new digital technologies for II&C architectures and provide monitoring capabilities to ensure the continued safe, reliable, and economic operation of the nation’s NPPs.« less

Switch on the engine: how the eukaryotic replicative helicase MCM2-7 becomes activated.

PubMed

Tognetti, Silvia; Riera, Alberto; Speck, Christian

2015-03-01

A crucial step during eukaryotic initiation of DNA replication is the correct loading and activation of the replicative DNA helicase, which ensures that each replication origin fires only once. Unregulated DNA helicase loading and activation, as it occurs in cancer, can cause severe DNA damage and genomic instability. The essential mini-chromosome maintenance proteins 2-7 (MCM2-7) represent the core of the eukaryotic replicative helicase that is loaded at DNA replication origins during G1-phase of the cell cycle. The MCM2-7 helicase activity, however, is only triggered during S-phase once the holo-helicase Cdc45-MCM2-7-GINS (CMG) has been formed. A large number of factors and several kinases interact and contribute to CMG formation and helicase activation, though the exact mechanisms remain unclear. Crucially, upon DNA damage, this reaction is temporarily halted to ensure genome integrity. Here, we review the current understanding of helicase activation; we focus on protein interactions during CMG formation, discuss structural changes during helicase activation, and outline similarities and differences of the prokaryotic and eukaryotic helicase activation process.

2017 publication guidelines for structural modelling of small-angle scattering data from biomolecules in solution: an update

PubMed Central

Duff, Anthony P.; Durand, Dominique; Gabel, Frank; Hendrickson, Wayne A.; Hura, Greg L.; Jacques, David A.; Kirby, Nigel M.; Kwan, Ann H.; Pérez, Javier; Pollack, Lois; Ryan, Timothy M.; Sali, Andrej; Schneidman-Duhovny, Dina; Vachette, Patrice; Westbrook, John

2017-01-01

In 2012, preliminary guidelines were published addressing sample quality, data acquisition and reduction, presentation of scattering data and validation, and modelling for biomolecular small-angle scattering (SAS) experiments. Bio­molecular SAS has since continued to grow and authors have increasingly adopted the preliminary guidelines. In parallel, integrative/hybrid determination of biomolecular structures is a rapidly growing field that is expanding the scope of structural biology. For SAS to contribute maximally to this field, it is essential to ensure open access to the information required for evaluation of the quality of SAS samples and data, as well as the validity of SAS-based structural models. To this end, the preliminary guidelines for data presentation in a publication are reviewed and updated, and the deposition of data and associated models in a public archive is recommended. These guidelines and recommendations have been prepared in consultation with the members of the International Union of Crystallography (IUCr) Small-Angle Scattering and Journals Commissions, the Worldwide Protein Data Bank (wwPDB) Small-Angle Scattering Validation Task Force and additional experts in the field. PMID:28876235

The organizational structure and governing principles of the Food and Drug Administration's Mini-Sentinel pilot program.

PubMed

Forrow, Susan; Campion, Daniel M; Herrinton, Lisa J; Nair, Vinit P; Robb, Melissa A; Wilson, Marcus; Platt, Richard

2012-01-01

The US Food and Drug Administration's Mini-Sentinel pilot program is developing an organizational structure as well as principles and policies to govern its operations. These will inform the structure and function of the eventual Sentinel System. Mini-Sentinel is a collaboration that includes 25 participating institutions. We describe the program's current organizational structure and its major principles and policies. The organization includes a coordinating center with program leadership provided by a principal investigator; a planning board and subcommittees; an operations center; and data, methods, and protocol cores. Ad hoc workgroups are created as needed. A privacy panel advises about protection of individual health information. Principles and policies are intended to ensure that Mini-Sentinel conforms to the principles of fair information practices, protects the privacy of individual health information, maintains the security and integrity of data, assures the confidentiality of proprietary information, provides accurate and timely communications, prevents or manages conflicts of interest, and preserves respect for intellectual property rights. Copyright © 2012 John Wiley & Sons, Ltd.

Organizing the pantry: cache management improves quality of overwinter food stores in a montane mammal

USGS Publications Warehouse

Jakopak, Rhiannon P.; Hall, L. Embere; Chalfoun, Anna D.

2017-01-01

Many mammals create food stores to enhance overwinter survival in seasonal environments. Strategic arrangement of food within caches may facilitate the physical integrity of the cache or improve access to high-quality food to ensure that cached resources meet future nutritional demands. We used the American pika (Ochotona princeps), a food-caching lagomorph, to evaluate variation in haypile (cache) structure (i.e., horizontal layering by plant functional group) in Wyoming, United States. Fifty-five percent of 62 haypiles contained at least 2 discrete layers of vegetation. Adults and juveniles layered haypiles in similar proportions. The probability of layering increased with haypile volume, but not haypile number per individual or nearby forage diversity. Vegetation cached in layered haypiles was also higher in nitrogen compared to vegetation in unlayered piles. We found that American pikas frequently structured their food caches, structured caches were larger, and the cached vegetation in structured piles was of higher nutritional quality. Improving access to stable, high-quality vegetation in haypiles, a critical overwinter food resource, may allow individuals to better persist amidst harsh conditions.

Nonlinear dynamic analysis of rigid rotor supported by gas foil bearings: Effects of gas film and foil structure on subsynchronous vibrations

NASA Astrophysics Data System (ADS)

Guo, Zhiyang; Feng, Kai; Liu, Tianyu; Lyu, Peng; Zhang, Tao

2018-07-01

Highly nonlinear subsynchronous vibrations are the main causing factors of failure in gas foil bearing (GFB)-rotor systems. Thus, investigating the vibration generation mechanisms and the relationship between subsynchronous vibrations and GFBs is necessary to ensure the healthy operation of rotor systems. In this study, an integrated nonlinear dynamic model with the consideration of shaft motion, unsteady gas film, and deformations of foil structure is established to investigate the effect of gas film and foil structure on system subsynchronous response. One test rig of GFB-rotor system is developed for model comparison. High agreement is shown between the prediction and test data, especially in the frequency domain. The nonlinear dynamic response is analyzed using waterfall plots, operation deflection shapes, journal orbits, Poincaré maps, and fast Fourier transforms. The parameter studies reveal that subsynchronous vibrations are highly related to gas film and foil structure. Subsynchronous vibrations can be adjusted by parameters such as bump stiffness, nominal clearance, and static loads. Therefore, gas foil bearing parameters should be carefully adjusted by system manufacturers to achieve the best rotordynamic performance.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Manzo, Vincent A.; Miles, Aaron R.

In October 2015, Secretary of Defense Carter called for NATO to better integrate conventional and nuclear deterrence. Four months later, Assistant Secretary of Defense Robert Scher stated in Senate testimony that the DoD is "working to ensure an appropriate level of integration between nuclear and conventional planning and operations."

Standards to support information systems integration in anatomic pathology.

PubMed

Daniel, Christel; García Rojo, Marcial; Bourquard, Karima; Henin, Dominique; Schrader, Thomas; Della Mea, Vincenzo; Gilbertson, John; Beckwith, Bruce A

2009-11-01

Integrating anatomic pathology information- text and images-into electronic health care records is a key challenge for enhancing clinical information exchange between anatomic pathologists and clinicians. The aim of the Integrating the Healthcare Enterprise (IHE) international initiative is precisely to ensure interoperability of clinical information systems by using existing widespread industry standards such as Digital Imaging and Communication in Medicine (DICOM) and Health Level Seven (HL7). To define standard-based informatics transactions to integrate anatomic pathology information to the Healthcare Enterprise. We used the methodology of the IHE initiative. Working groups from IHE, HL7, and DICOM, with special interest in anatomic pathology, defined consensual technical solutions to provide end-users with improved access to consistent information across multiple information systems. The IHE anatomic pathology technical framework describes a first integration profile, "Anatomic Pathology Workflow," dedicated to the diagnostic process including basic image acquisition and reporting solutions. This integration profile relies on 10 transactions based on HL7 or DICOM standards. A common specimen model was defined to consistently identify and describe specimens in both HL7 and DICOM transactions. The IHE anatomic pathology working group has defined standard-based informatics transactions to support the basic diagnostic workflow in anatomic pathology laboratories. In further stages, the technical framework will be completed to manage whole-slide images and semantically rich structured reports in the diagnostic workflow and to integrate systems used for patient care and those used for research activities (such as tissue bank databases or tissue microarrayers).

Physiology and pathology of saccades and gaze holding.

PubMed

Shaikh, Aasef G; Ghasia, Fatema F

2013-01-01

Foveation is the fundamental requirement for clear vision. Saccades rapidly shift the gaze to the interesting target while gaze holding ensures foveation of the desired object. We will review the pertinent physiology of saccades and gaze holding and their pathophysiology leading to saccadic oscillations, slow saccades, saccadic dysmetria, and nystagmus. Motor commands for saccades are generated at multiple levels of the neuraxis. The frontal and parietal eye field send saccadic commands to the superior colliculus. Latter then projects to the brain-stem saccadic burst generator. The brain-stem burst generators guarantee optimum signal to ensure rapid saccadic velocity, while the neural integrator, by mathematically integrating the saccadic pulse, facilitates stable gaze holding. Reciprocal innervations that ensure rapid saccadic velocity are prone to inherent instability leading to saccadic oscillations. In contrast, suboptimal function of the burst generators causes slow saccades. Impaired error correction, either at the cerebellum or the inferior olive, leads to impaired saccade adaptation and ultimately saccadic dysmetria and oculopalatal tremor. Impairment in the function of neural integrator causes nystagmus. Neurophysiology of saccades, gaze holding, and their deficits are well recognized. These principles can be implemented to define novel therapeutic and rehabilitation approaches.

Quality by design case study: an integrated multivariate approach to drug product and process development.

PubMed

Huang, Jun; Kaul, Goldi; Cai, Chunsheng; Chatlapalli, Ramarao; Hernandez-Abad, Pedro; Ghosh, Krishnendu; Nagi, Arwinder

2009-12-01

To facilitate an in-depth process understanding, and offer opportunities for developing control strategies to ensure product quality, a combination of experimental design, optimization and multivariate techniques was integrated into the process development of a drug product. A process DOE was used to evaluate effects of the design factors on manufacturability and final product CQAs, and establish design space to ensure desired CQAs. Two types of analyses were performed to extract maximal information, DOE effect & response surface analysis and multivariate analysis (PCA and PLS). The DOE effect analysis was used to evaluate the interactions and effects of three design factors (water amount, wet massing time and lubrication time), on response variables (blend flow, compressibility and tablet dissolution). The design space was established by the combined use of DOE, optimization and multivariate analysis to ensure desired CQAs. Multivariate analysis of all variables from the DOE batches was conducted to study relationships between the variables and to evaluate the impact of material attributes/process parameters on manufacturability and final product CQAs. The integrated multivariate approach exemplifies application of QbD principles and tools to drug product and process development.

Variational nonadiabatic dynamics in the moving crude adiabatic representation: Further merging of nuclear dynamics and electronic structure

NASA Astrophysics Data System (ADS)

Joubert-Doriol, Loïc; Izmaylov, Artur F.

2018-03-01

A new methodology of simulating nonadiabatic dynamics using frozen-width Gaussian wavepackets within the moving crude adiabatic representation with the on-the-fly evaluation of electronic structure is presented. The main feature of the new approach is the elimination of any global or local model representation of electronic potential energy surfaces; instead, the electron-nuclear interaction is treated explicitly using the Gaussian integration. As a result, the new scheme does not introduce any uncontrolled approximations. The employed variational principle ensures the energy conservation and leaves the number of electronic and nuclear basis functions as the only parameter determining the accuracy. To assess performance of the approach, a model with two electronic and two nuclear spacial degrees of freedom containing conical intersections between potential energy surfaces has been considered. Dynamical features associated with nonadiabatic transitions and nontrivial geometric (or Berry) phases were successfully reproduced within a limited basis expansion.

Recombination, Pairing, and Synapsis of Homologs during Meiosis

PubMed Central

Zickler, Denise; Kleckner, Nancy

2015-01-01

Recombination is a prominent feature of meiosis in which it plays an important role in increasing genetic diversity during inheritance. Additionally, in most organisms, recombination also plays mechanical roles in chromosomal processes, most notably to mediate pairing of homologous chromosomes during prophase and, ultimately, to ensure regular segregation of homologous chromosomes when they separate at the first meiotic division. Recombinational interactions are also subject to important spatial patterning at both early and late stages. Recombination-mediated processes occur in physical and functional linkage with meiotic axial chromosome structure, with interplay in both directions, before, during, and after formation and dissolution of the synaptonemal complex (SC), a highly conserved meiosis-specific structure that links homolog axes along their lengths. These diverse processes also are integrated with recombination-independent interactions between homologous chromosomes, nonhomology-based chromosome couplings/clusterings, and diverse types of chromosome movement. This review provides an overview of these diverse processes and their interrelationships. PMID:25986558

Compact photonic crystal circulator with flat-top transmission band created by cascading magneto-optical resonance cavities.

PubMed

Wang, Qiong; Ouyang, Zhengbiao; Lin, Mi; Liu, Qiang

2015-11-20

A new type of compact three-port circulator with flat-top transmission band (FTTB) in a two-dimensional photonic crystal has been proposed, through coupling the cascaded magneto-optical resonance cavities to waveguides. The coupled-mode theory is applied to investigate the coupled structure and analyze the condition to achieve FTTB. According to the theoretical analysis, the structure is further optimized to ensure that the condition for achieving FTTB can be satisfied for both cavity-cavity coupling and cavity-waveguide coupling. Through the finite-element method, it is demonstrated that the design can realize a high quality, nonreciprocal circulating propagation of waves with an insertion loss of 0.023 dB and an isolation of 23.3 dB, covering a wide range of operation frequency. Such a wideband circulator has potential applications in large-scale integrated photonic circuits for guiding or isolating harmful optical reflections from load elements.

Strategies to engineer tendon/ligament-to-bone interface: Biomaterials, cells and growth factors.

PubMed

Font Tellado, Sonia; Balmayor, Elizabeth R; Van Griensven, Martijn

2015-11-01

Integration between tendon/ligament and bone occurs through a specialized tissue interface called enthesis. The complex and heterogeneous structure of the enthesis is essential to ensure smooth mechanical stress transfer between bone and soft tissues. Following injury, the interface is not regenerated, resulting in high rupture recurrence rates. Tissue engineering is a promising strategy for the regeneration of a functional enthesis. However, the complex structural and cellular composition of the native interface makes enthesis tissue engineering particularly challenging. Thus, it is likely that a combination of biomaterials and cells stimulated with appropriate biochemical and mechanical cues will be needed. The objective of this review is to describe the current state-of-the-art, challenges and future directions in the field of enthesis tissue engineering focusing on four key parameters: (1) scaffold and biomaterials, (2) cells, (3) growth factors and (4) mechanical stimuli. Copyright © 2015 Elsevier B.V. All rights reserved.

Promoting the management and protection of private water wells.

PubMed

Simpson, Hugh

Rural families in Ontario depend almost entirely on groundwater from private wells for their potable water supply. In many cases, groundwater may be the only feasible water supply source and it requires management and protection. A significant potential source of ground water contamination is the movement of contaminated surface water through water wells that are improperly constructed, maintained, or should be decommissioned. Therefore, proper water well construction and maintenance, and eventual decommissioning, are critical for managing and protecting the quantity and quality of groundwater, as well as ensuring the integrity of rural drinking-water supplies. These actions are important for protecting private water supplies from both potential human and natural contamination. Individual well owners each have a personal interest and valuable role in ensuring the integrity of their water supplies. The following information is required to help well owners ensure the integrity of their water supply: different types of wells, why some wells are at greater risk of contamination than others, and sources of groundwater contaminants; groundwater contaminants, how they can move through soil and water, and potential risks to human health; benefits of ensuring that wells are properly maintained and operate efficiently; and importance of a regular well water quality testing program. This paper summarizes the technical information that should be provided to rural well owners concerning proper water well and groundwater management and protection, and provides an example of how this information can be promoted in an effective manner.

Near-infrared light-controlled tunable grating based on graphene/elastomer composites

NASA Astrophysics Data System (ADS)

Wang, Fei; Jia, Shuhai; Wang, Yonglin; Tang, Zhenhua

2018-02-01

A near-infrared (nIR) light actuated tunable transmission optical grating based on graphene nanoplatelet (GNP)/polydimethylsiloxane (PDMS) and PDMS is proposed. A simple fabrication protocol is studied that allows integration of the grating with the actuation mechanism; both components are made from soft elastomers, and this ensure the tunability and the light-driven operation of the grating. The resulting grating structure demonstrates continuous period tunability of 2.7% under an actuation power density of 220 mW cm-2 within a period of 3 s and also demonstrates a time-independent characteristic. The proposed infrared activated grating can be developed for wireless remote light splitting in bio/chemical sensing and optical telecommunications applications.

REPPER—repeats and their periodicities in fibrous proteins

PubMed Central

Gruber, Markus; Söding, Johannes; Lupas, Andrei N.

2005-01-01

REPPER (REPeats and their PERiodicities) is an integrated server that detects and analyzes regions with short gapless repeats in protein sequences or alignments. It finds periodicities by Fourier Transform (FTwin) and internal similarity analysis (REPwin). FTwin assigns numerical values to amino acids that reflect certain properties, for instance hydrophobicity, and gives information on corresponding periodicities. REPwin uses self-alignments and displays repeats that reveal significant internal similarities. Both programs use a sliding window to ensure that different periodic regions within the same protein are detected independently. FTwin and REPwin are complemented by secondary structure prediction (PSIPRED) and coiled coil prediction (COILS), making the server a versatile analysis tool for sequences of fibrous proteins. REPPER is available at . PMID:15980460

Analysis of a Circular Composite Disk Subjected to Edge Rotations and Hydrostatic Pressure

NASA Technical Reports Server (NTRS)

Oliver, Stanley T.

2004-01-01

The structural analysis results for a graphite/epoxy quasi-isotropic circular plate subjected to a forced rotation at the boundary and pressure is presented. The analysis is to support a specialized material characterization test for composite cryogenic tanks. Finite element models were used to ensure panel integrity and determine the pressure necessary to achieve a predetermined equal biaxial strain value. The displacement results due to the forced rotation at the boundary led to a detailed study of the bending stiffness matrix [D]. The variation of the bending stiffness terms as a function of angular position is presented graphically, as well as, an illustrative technique of considering the laminate as an I-beam.

On pads and filters: Processing strong-motion data

USGS Publications Warehouse

Boore, D.M.

2005-01-01

Processing of strong-motion data in many cases can be as straightforward as filtering the acceleration time series and integrating to obtain velocity and displacement. To avoid the introduction of spurious low-frequency noise in quantities derived from the filtered accelerations, however, care must be taken to append zero pads of adequate length to the beginning and end of the segment of recorded data. These padded sections of the filtered acceleration need to be retained when deriving velocities, displacements, Fourier spectra, and response spectra. In addition, these padded and filtered sections should also be included in the time series used in the dynamic analysis of structures and soils to ensure compatibility with the filtered accelerations.

Chromatin Dynamics in Genome Stability: Roles in Suppressing Endogenous DNA Damage and Facilitating DNA Repair

PubMed Central

Nair, Nidhi; Shoaib, Muhammad

2017-01-01

Genomic DNA is compacted into chromatin through packaging with histone and non-histone proteins. Importantly, DNA accessibility is dynamically regulated to ensure genome stability. This is exemplified in the response to DNA damage where chromatin relaxation near genomic lesions serves to promote access of relevant enzymes to specific DNA regions for signaling and repair. Furthermore, recent data highlight genome maintenance roles of chromatin through the regulation of endogenous DNA-templated processes including transcription and replication. Here, we review research that shows the importance of chromatin structure regulation in maintaining genome integrity by multiple mechanisms including facilitating DNA repair and directly suppressing endogenous DNA damage. PMID:28698521

Keystone Species, Forest and Landscape: A Model to Select Protected Areas

NASA Astrophysics Data System (ADS)

Lins, Daniela Barbosa da Silva; Gardon, Fernando Ravanini; Meyer, João Frederico da Costa Azevedo; Santos, Rozely Ferreira dos

2017-06-01

The selection of forest fragments for conservation is usually based on spatial parameters as forest size and canopy integrity. This strategy assumes that chosen fragments present high conservation status, ensuring biodiversity and ecological functions. We argue that a well-preserved forest fragment that remains connected by the landscape structure, does not necessarily hold attributes that ensure the presence of keystone species. We also discuss that the presence of keystone species does not always mean that it has the best conditions for its occurrence and maintenance. We developed a model to select areas in forest landscapes to be prioritized for protection based on suitability curves that unify and compare spatial indicators of three categories: forest fragment quality, landscape quality, and environmental conditions for the occurrence of a keystone species. We use a case study to compare different suitability degrees for Euterpe edulis presence, considered an important functional element in Atlantic Forest (São Paulo, Brazil) landscapes and a forest resource for local people. The results show that the identification of medium or advanced stage fragments as singular indicator of forest quality does not guarantee the existence or maintenance of this keystone species. Even in some well-preserved forest fragments, connected to others and with palm presence, the reverse J-shaped distribution of the population size structure is not sustained and these forests continue to be threatened due to human disturbances.

Proteomic insights into floral biology.

PubMed

Li, Xiaobai; Jackson, Aaron; Xie, Ming; Wu, Dianxing; Tsai, Wen-Chieh; Zhang, Sheng

2016-08-01

The flower is the most important biological structure for ensuring angiosperms reproductive success. Not only does the flower contain critical reproductive organs, but the wide variation in morphology, color, and scent has evolved to entice specialized pollinators, and arguably mankind in many cases, to ensure the successful propagation of its species. Recent proteomic approaches have identified protein candidates related to these flower traits, which has shed light on a number of previously unknown mechanisms underlying these traits. This review article provides a comprehensive overview of the latest advances in proteomic research in floral biology according to the order of flower structure, from corolla to male and female reproductive organs. It summarizes mainstream proteomic methods for plant research and recent improvements on two dimensional gel electrophoresis and gel-free workflows for both peptide level and protein level analysis. The recent advances in sequencing technologies provide a new paradigm for the ever-increasing genome and transcriptome information on many organisms. It is now possible to integrate genomic and transcriptomic data with proteomic results for large-scale protein characterization, so that a global understanding of the complex molecular networks in flower biology can be readily achieved. This article is part of a Special Issue entitled: Plant Proteomics--a bridge between fundamental processes and crop production, edited by Dr. Hans-Peter Mock. Copyright © 2016 Elsevier B.V. All rights reserved.

New Tool Released for Engine-Airframe Blade-Out Structural Simulations

NASA Technical Reports Server (NTRS)

Lawrence, Charles

2004-01-01

Researchers at the NASA Glenn Research Center have enhanced a general-purpose finite element code, NASTRAN, for engine-airframe structural simulations during steady-state and transient operating conditions. For steady-state simulations, the code can predict critical operating speeds, natural modes of vibration, and forced response (e.g., cabin noise and component fatigue). The code can be used to perform static analysis to predict engine-airframe response and component stresses due to maneuver loads. For transient response, the simulation code can be used to predict response due to bladeoff events and subsequent engine shutdown and windmilling conditions. In addition, the code can be used as a pretest analysis tool to predict the results of the bladeout test required for FAA certification of new and derivative aircraft engines. Before the present analysis code was developed, all the major aircraft engine and airframe manufacturers in the United States and overseas were performing similar types of analyses to ensure the structural integrity of engine-airframe systems. Although there were many similarities among the analysis procedures, each manufacturer was developing and maintaining its own structural analysis capabilities independently. This situation led to high software development and maintenance costs, complications with manufacturers exchanging models and results, and limitations in predicting the structural response to the desired degree of accuracy. An industry-NASA team was formed to overcome these problems by developing a common analysis tool that would satisfy all the structural analysis needs of the industry and that would be available and supported by a commercial software vendor so that the team members would be relieved of maintenance and development responsibilities. Input from all the team members was used to ensure that everyone's requirements were satisfied and that the best technology was incorporated into the code. Furthermore, because the code would be distributed by a commercial software vendor, it would be more readily available to engine and airframe manufacturers, as well as to nonaircraft companies that did not previously have access to this capability.

Ecology, Democracy, and Green Schools: An Integrated Framework

ERIC Educational Resources Information Center

Kensler, Lisa A. W.

2012-01-01

Sustainability is the integration of ecological, social, and economic approaches to ensuring healthy local and global communities for present and future generations. Although environmental science and social studies teachers have assumed primary responsibility for sustainability related programs and initiatives, whole school approaches to teaching…

Systematic Curriculum Integration of Sustainable Development Using Life Cycle Approaches: The Case of the Civil Engineering Department at the Université de Sherbrooke

ERIC Educational Resources Information Center

Roure, Bastien; Anand, Chirjiv; Bisaillon, Véronique; Amor, Ben

2018-01-01

Purpose: The purpose of this paper is to provide a consistent and systematic integration framework of sustainable development (SD) in a civil engineering (CE) curriculum, given the connection between the two. Curriculum integration is a challenging project and requires the development of certain protocols to ensure success.…

Implementation of Enterprise Imaging Strategy at a Chinese Tertiary Hospital.

PubMed

Li, Shanshan; Liu, Yao; Yuan, Yifang; Li, Jia; Wei, Lan; Wang, Yuelong; Fei, Xiaolu

2018-01-04

Medical images have become increasingly important in clinical practice and medical research, and the need to manage images at the hospital level has become urgent in China. To unify patient identification in examinations from different medical specialties, increase convenient access to medical images under authentication, and make medical images suitable for further artificial intelligence investigations, we implemented an enterprise imaging strategy by adopting an image integration platform as the main tool at Xuanwu Hospital. Workflow re-engineering and business system transformation was also performed to ensure the quality and content of the imaging data. More than 54 million medical images and approximately 1 million medical reports were integrated, and uniform patient identification, images, and report integration were made available to the medical staff and were accessible via a mobile application, which were achieved by implementing the enterprise imaging strategy. However, to integrate all medical images of different specialties at a hospital and ensure that the images and reports are qualified for data mining, some further policy and management measures are still needed.

Development of a new connection for precast concrete walls subjected to cyclic loading

NASA Astrophysics Data System (ADS)

Vaghei, Ramin; Hejazi, Farzad; Taheri, Hafez; Jaafar, Mohd Saleh; Aziz, Farah Nora Aznieta Abdul

2017-01-01

The Industrialized Building System (IBS) was recently introduced to minimize the time and cost of project construction. Accordingly, ensuring the integration of the connection of precast components in IBS structures is an important factor that ensures stability of buildings subjected to dynamic loads from earthquakes, vehicles, and machineries. However, structural engineers still lack knowledge on the proper connection and detailed joints of IBS structure construction. Therefore, this study proposes a special precast concrete wall-to-wall connection system for dynamic loads that resists multidirectional imposed loads and reduces vibration effects (PI2014701723). This system is designed to connect two adjacent precast wall panels by using two steel U-shaped channels (i.e., male and female joints). During casting, each joint is adapted for incorporation into a respective wall panel after considering the following conditions: one side of the steel channel opens into the thickness face of the panel; a U-shaped rubber is implemented between the two channels to dissipate the vibration effect; and bolts and nuts are used to create an extension between the two U-shaped male and female steel channels. The developed finite element model of the precast wall is subjected to cyclic loads to evaluate the performance of the proposed connection during an imposed dynamic load. Connection performance is then compared with conventional connections based on the energy dissipation, stress, deformation, and concrete damage in the plastic range. The proposed precast connection is capable of exceeding the energy absorption of precast walls subjected to dynamic load, thereby improving its resistance behavior in all principal directions.

National Wildlife Refuge System: Ecological context and integrity

USGS Publications Warehouse

Scott, J.M.; Loveland, T.; Gergely, K.; Strittholt, J.; Staus, N.

2004-01-01

The Refuge Improvement Act of 1997 established a statutory mission and management standards for the National Wildlife Refuge system. The U.S. Fish and Wildlife Service subsequently issued a policy for ensuring the biological integrity, diversity, and environmental health of the system. This policy requires understanding the management objectives of each refuge in a local, regional, and national context. An assessment of the refuge system in a national and regional context reveals that refuges are typically smaller than many conservation holdings and are unevenly distributed across the conterminous U.S. Western rangelands, coastal wetlands, and northern grasslands; wetlands are the best-represented ecosystems, while temperate forests have the poorest representation. In contrast to other agency holdings or management designations in the national protected areas network (e.g., national parks, national forests, wilderness areas), refuges tend to occupy sites at lower elevations and that have higher productivity and soil quality. This difference points to the important contribution of the refuges in providing much needed ecological balance within the national protected areas network. However, the ecological integrity of the refuge system is challenged by the proximity of individual refuges to development. Overall, the refuges are becoming islands in a landscape matrix of urban and agricultural development. This creates future challenges for meeting management objectives to ensure the biological integrity, diversity, and environmental health of the system. If the policy to ensure biological integrity, diversity, and environmental health of the refuge system is to be successful, it may be more important to address issues about what happens on adjacent lands than uses within refuges.

Impact of Underwater Explosions on Concrete Bridge Foundations

DTIC Science & Technology

2016-06-01

www.theconstructioncivil.org/ [16] M. Aggour, A. Hachichi and M. Mayer, “Nondestructive evaluation of timber bridge piles,” in Proceedings of a Session a Structure Congress...detonation must be executed a safe distance from any critical infrastructure to ensure the survivability of the structure . This thesis implements...be executed a safe distance from any critical infrastructure to ensure the survivability of the structure . This thesis implements the Dynamic System

Ensuring the Integrity, Accessibility, and Stewardship of Research Data in the Digital Age

ERIC Educational Resources Information Center

National Academies Press, 2009

2009-01-01

As digital technologies are expanding the power and reach of research, they are also raising complex issues. These include complications in ensuring the validity of research data; standards that do not keep pace with the high rate of innovation; restrictions on data sharing that reduce the ability of researchers to verify results and build on…

Strategies for healthcare facilities, construction, and real estate management.

PubMed

Lee, James G

2012-05-01

Adventist HealthCare offers the following lessons learned in improving the value of healthcare facilities, construction, and real estate management: Use an integrated approach. Ensure that the objectives of the approach align the hospital or health system's mission and values. Embrace innovation. Develop a plan that applies to the whole organization, rather than specific business units. Ensure commitment of senior leaders.

Design and Implementation of a New System for Large Bridge Monitoring—GeoSHM

PubMed Central

Xie, Yilin; Ince, Sean; Ye, Jun; Bhatia, Paul

2018-01-01

Structural Health Monitoring (SHM) is a relatively new branch of civil engineering that focuses on assessing the health status of infrastructure, such as long-span bridges. Using a broad range of in-situ monitoring instruments, the purpose of the SHM is to help engineers understand the behaviour of structures, ensuring their structural integrity and the safety of the public. Under the Integrated Applications Promotion (IAP) scheme of the European Space Agency (ESA), a feasibility study (FS) project that used the Global Navigation Satellite Systems (GNSS) and Earth Observation (EO) for Structural Health Monitoring of Long-span Bridges (GeoSHM) was initiated in 2013. The GeoSHM FS Project was led by University of Nottingham and the Forth Road Bridge (Scotland, UK), which is a 2.5 km long suspension bridge across the Firth of Forth connecting Edinburgh and the Northern part of Scotland, was selected as the test structure for the GeoSHM FS project. Initial results have shown the significant potential of the GNSS and EO technologies. With these successes, the FS project was further extended to the demonstration stage, which is called the GeoSHM Demo project where two other long-span bridges in China were included as test structures. Led by UbiPOS UK Ltd. (Nottingham, UK), a Nottingham Hi-tech company, this stage focuses on addressing limitations identified during the feasibility study and developing an innovative data strategy to process, store, and interpret monitoring data. This paper will present an overview of the motivation and challenges of the GeoSHM Demo Project, a description of the software and hardware architecture and a discussion of some primary results that were obtained in the last three years. PMID:29510534

New Langevin and gradient thermostats for rigid body dynamics.

PubMed

Davidchack, R L; Ouldridge, T E; Tretyakov, M V

2015-04-14

We introduce two new thermostats, one of Langevin type and one of gradient (Brownian) type, for rigid body dynamics. We formulate rotation using the quaternion representation of angular coordinates; both thermostats preserve the unit length of quaternions. The Langevin thermostat also ensures that the conjugate angular momenta stay within the tangent space of the quaternion coordinates, as required by the Hamiltonian dynamics of rigid bodies. We have constructed three geometric numerical integrators for the Langevin thermostat and one for the gradient thermostat. The numerical integrators reflect key properties of the thermostats themselves. Namely, they all preserve the unit length of quaternions, automatically, without the need of a projection onto the unit sphere. The Langevin integrators also ensure that the angular momenta remain within the tangent space of the quaternion coordinates. The Langevin integrators are quasi-symplectic and of weak order two. The numerical method for the gradient thermostat is of weak order one. Its construction exploits ideas of Lie-group type integrators for differential equations on manifolds. We numerically compare the discretization errors of the Langevin integrators, as well as the efficiency of the gradient integrator compared to the Langevin ones when used in the simulation of rigid TIP4P water model with smoothly truncated electrostatic interactions. We observe that the gradient integrator is computationally less efficient than the Langevin integrators. We also compare the relative accuracy of the Langevin integrators in evaluating various static quantities and give recommendations as to the choice of an appropriate integrator.

Proportional and Integral Thermal Control System for Large Scale Heating Tests

NASA Technical Reports Server (NTRS)

Fleischer, Van Tran

2015-01-01

The National Aeronautics and Space Administration Armstrong Flight Research Center (Edwards, California) Flight Loads Laboratory is a unique national laboratory that supports thermal, mechanical, thermal/mechanical, and structural dynamics research and testing. A Proportional Integral thermal control system was designed and implemented to support thermal tests. A thermal control algorithm supporting a quartz lamp heater was developed based on the Proportional Integral control concept and a linearized heating process. The thermal control equations were derived and expressed in terms of power levels, integral gain, proportional gain, and differences between thermal setpoints and skin temperatures. Besides the derived equations, user's predefined thermal test information generated in the form of thermal maps was used to implement the thermal control system capabilities. Graphite heater closed-loop thermal control and graphite heater open-loop power level were added later to fulfill the demand for higher temperature tests. Verification and validation tests were performed to ensure that the thermal control system requirements were achieved. This thermal control system has successfully supported many milestone thermal and thermal/mechanical tests for almost a decade with temperatures ranging from 50 F to 3000 F and temperature rise rates from -10 F/s to 70 F/s for a variety of test articles having unique thermal profiles and test setups.

[Networks, disease management programs, GP coordinator: analysis of recent ambulatory reforms in Germany].

PubMed

Giovanella, Ligia

2011-01-01

Strengthening the role of the general practitioner in the conduction and coordination of specialized, inpatient and social care to ensure the continuity is a trend observed in recent health reforms in European countries. In Germany, from the second half of the 1990s, driven by economic pressures, a specific legislation and initiatives of the providers themselves have developed new organizational structures and care models for the purpose of the integration of the health care system and the coordination of health care in the form of: physicians networks, practitioner coordinator model, diseases management programs and integrated care. From a literature review, document analysis, visits to services and interviews with key informants, this paper analyzes the dynamics of these organizational changes in the German outpatient sector. The mechanisms of integration and coordination proposed are examined, and the potential impacts on the efficiency and quality of new organizational arrangements are discussed. Also it is analyzed the reasons and interests involved that point out the obstacles to the implementation. It was observed the process of an incremental reform with a tendency of diversification of the healthcare panorama in Germany with the presence of integrated models of care and strengthening the role of general practitioners in the coordination of patient care.

Assessing and Enhancing Environmental Sustainability: A Conceptual Review.

PubMed

Little, John C; Hester, Erich T; Carey, Cayelan C

2016-07-05

While sustainability is an essential concept to ensure the future of humanity and the integrity of the resources and ecosystems on which we depend, identifying a comprehensive yet realistic way to assess and enhance sustainability may be one of the most difficult challenges of our time. We review the primary environmental sustainability assessment approaches, categorizing them as either being design-based or those that employ computational frameworks and/or indicators. We also briefly review approaches used for assessing economic and social sustainability because sustainability necessitates integrating environmental, economic, and social elements. We identify the collective limitations of the existing assessment approaches, showing that there is not a consistent definition of sustainability, that the approaches are generally not comprehensive and are subject to unintended consequences, that there is little to no connection between bottom-up and top-down approaches, and that the field of sustainability is largely fragmented, with a range of academic disciplines and professional organizations pursuing similar goals, but without much formal coordination. We conclude by emphasizing the need for a comprehensive definition of sustainability (that integrates environmental, economic, and social aspects) with a unified system-of-systems approach that is causal, modular, tiered, and scalable, as well as new educational and organizational structures to improve systems-level interdisciplinary integration.

Proprioceptive feedback determines visuomotor gain in Drosophila

PubMed Central

Bartussek, Jan; Lehmann, Fritz-Olaf

2016-01-01

Multisensory integration is a prerequisite for effective locomotor control in most animals. Especially, the impressive aerial performance of insects relies on rapid and precise integration of multiple sensory modalities that provide feedback on different time scales. In flies, continuous visual signalling from the compound eyes is fused with phasic proprioceptive feedback to ensure precise neural activation of wing steering muscles (WSM) within narrow temporal phase bands of the stroke cycle. This phase-locked activation relies on mechanoreceptors distributed over wings and gyroscopic halteres. Here we investigate visual steering performance of tethered flying fruit flies with reduced haltere and wing feedback signalling. Using a flight simulator, we evaluated visual object fixation behaviour, optomotor altitude control and saccadic escape reflexes. The behavioural assays show an antagonistic effect of wing and haltere signalling on visuomotor gain during flight. Compared with controls, suppression of haltere feedback attenuates while suppression of wing feedback enhances the animal’s wing steering range. Our results suggest that the generation of motor commands owing to visual perception is dynamically controlled by proprioception. We outline a potential physiological mechanism based on the biomechanical properties of WSM and sensory integration processes at the level of motoneurons. Collectively, the findings contribute to our general understanding how moving animals integrate sensory information with dynamically changing temporal structure. PMID:26909184

Does Structured Quizzing with Process Specific Feedback Lead to Learning Gains in an Active Learning Geoscience Classroom?

NASA Astrophysics Data System (ADS)

Palsole, S.; Serpa, L. F.

2013-12-01

There is a great realization that efficient teaching in the geosciences has the potential to have far reaching effects in outreach to decision and policy makers (Herbert, 2006; Manduca & Mogk, 2006). This research in turn informs educators that the geosciences by the virtue of their highly integrative nature play an important role in serving as an entry point into STEM disciplines and helping developing a new cadre of geoscientists, scientists and a general population with an understanding of science. Keeping these goals in mind we set to design introductory geoscience courses for non-majors and majors that move away from the traditional lecture models which don't necessarily contribute well to knowledge building and retention ((Handelsman et al., 2007; Hake, 1997) to a blended active learning classroom where basic concepts and didactic information is acquired online via webquests, lecturettes and virtual field trips and the face to face portions of the class are focused on problem solving exercises. The traditional way to ensure that students are prepared for the in-class activity is to have the students take a quiz online to demonstrate basic competency. In the process of redesign, we decided to leverage the technology to build quizzes that are highly structured and map to a process (formation of divergent boundaries for example) or sets of earth processes that we needed the students to know before in-class activities. The quizzes can be taken multiple times and provide process specific feedback, thus serving as a heuristic to the students to ensure they have acquired the necessary competency. The heuristic quizzes were developed and deployed over a year with the student data driving the redesign process to ensure synchronicity. Preliminary data analysis indicates a positive correlation between higher student scores on in-class application exercises and time spent on the process quizzes. An assessment of learning gains also indicate a higher degree of self efficacy among students who took the quizzes multiple times vs. the students who took the quizzes just enough times to ensure a passing grade.

Crop and livestock enterprise integration: Livestock impacts on forage, stover, and grain production

USDA-ARS?s Scientific Manuscript database

Enterprise diversity is the key to ensure productive and sustainable agriculture for the future. Integration of crops and livestock enterprises is one way to improve agricultural sustainability, and take advantage of beneficial enterprise synergistic effects. Our objectives were to develop cropping ...

Application of an Integrated Assessment Model to the Kevin Dome site, Montana

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Minh; Zhang, Ye; Carey, James William

The objectives of the Integrated Assessment Model is to enable the Fault Swarm algorithm in the National Risk Assessment Partnership, ensure faults are working in the NRAP-IAM tool, calculate hypothetical fault leakage in NRAP-IAM, and compare leakage rates to Eclipse simulations.

CANES Contracting Strategies for Full Deployment

DTIC Science & Technology

2012-01-01

9 CANES Program Functions in Full Deployment...contractors will design CANES, identifying specific hardware and developing the integration software necessary to consolidate existing C4I functions . At...would be responsible for execut- ing the purchased design and assembling the systems, ensuring that the integration software is functioning . An

78 FR 18083 - Regulation Systems Compliance and Integrity

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-25

... and procedures reasonably designed to ensure that their systems have levels of capacity, integrity... 1980s.\\13\\ The Commission acknowledged improvements in efficiency during that time period, but noted... an as-needed basis, as well as provide real- time notification of unusual events, such as significant...

14 CFR 1216.302 - Responsibilities.

Code of Federal Regulations, 2013 CFR

2013-01-01

... overseeing and guiding NASA's integration of NEPA into the Agency's planning and decision making. The SEO... Agency planning and decision-making processes. The SEO shall monitor this process to ensure that these... functions and guiding NASA's integration of NEPA into the Agency's planning and decision making for all NASA...

Tetrahymena Poc1 ensures proper intertriplet microtubule linkages to maintain basal body integrity

PubMed Central

Meehl, Janet B.; Bayless, Brian A.; Giddings, Thomas H.; Pearson, Chad G.; Winey, Mark

2016-01-01

Basal bodies comprise nine symmetric triplet microtubules that anchor forces produced by the asymmetric beat pattern of motile cilia. The ciliopathy protein Poc1 stabilizes basal bodies through an unknown mechanism. In poc1∆ cells, electron tomography reveals subtle defects in the organization of intertriplet linkers (A-C linkers) that connect adjacent triplet microtubules. Complete triplet microtubules are lost preferentially near the posterior face of the basal body. Basal bodies that are missing triplets likely remain competent to assemble new basal bodies with nine triplet microtubules, suggesting that the mother basal body microtubule structure does not template the daughter. Our data indicate that Poc1 stabilizes basal body triplet microtubules through linkers between neighboring triplets. Without this stabilization, specific triplet microtubules within the basal body are more susceptible to loss, probably due to force distribution within the basal body during ciliary beating. This work provides insights into how the ciliopathy protein Poc1 maintains basal body integrity. PMID:27251062

Forming a new clinical team for frail older people: can a group development model help?

PubMed

Anderson, Elizabeth Susan; Pollard, Lorraine; Conroy, Simon; Clague-Baker, Nicola

2014-03-01

Integrated services which utilise the expertise of team members along care pathways are evolving. Changes in service structure and subsequent team working arrangements can be a challenge for practitioners expected to redefine how they work with one another. These services are particularly important for the care of frail older people. This exploratory study of one newly forming team presents the views of staff involved in establishing an interprofessional healthcare advisory team for older people within an acute hospital admissions unit. Staff experiences of forming a new service are aligned to a model of team development. The findings are presented as themes relating to the stages of team development and identify the challenges of setting up an integrated service alongside existing services. In particular, team process issues relating to the clarity of goals, role clarification, leadership, team culture and identity. Managers must allow time to ensure new services evolve before setting up evaluation studies for efficiency and effectiveness which might prove against the potential for interprofessional teamworking.

Fluid-structure interaction of turbulent boundary layer over a compliant surface

NASA Astrophysics Data System (ADS)

Anantharamu, Sreevatsa; Mahesh, Krishnan

2016-11-01

Turbulent flows induce unsteady loads on surfaces in contact with them, which affect material stresses, surface vibrations and far-field acoustics. We are developing a numerical methodology to study the coupled interaction of a turbulent boundary layer with the underlying surface. The surface is modeled as a linear elastic solid, while the fluid follows the spatially filtered incompressible Navier-Stokes equations. An incompressible Large Eddy Simulation finite volume flow approach based on the algorithm of Mahesh et al. is used in the fluid domain. The discrete kinetic energy conserving property of the method ensures robustness at high Reynolds number. The linear elastic model in the solid domain is integrated in space using finite element method and in time using the Newmark time integration method. The fluid and solid domain solvers are coupled using both weak and strong coupling methods. Details of the algorithm, validation, and relevant results will be presented. This work is supported by NSWCCD, ONR.

A multifunctional biphasic water splitting catalyst tailored for integration with high-performance semiconductor photoanodes

NASA Astrophysics Data System (ADS)

Yang, Jinhui; Cooper, Jason K.; Toma, Francesca M.; Walczak, Karl A.; Favaro, Marco; Beeman, Jeffrey W.; Hess, Lucas H.; Wang, Cheng; Zhu, Chenhui; Gul, Sheraz; Yano, Junko; Kisielowski, Christian; Schwartzberg, Adam; Sharp, Ian D.

2017-03-01

Artificial photosystems are advanced by the development of conformal catalytic materials that promote desired chemical transformations, while also maintaining stability and minimizing parasitic light absorption for integration on surfaces of semiconductor light absorbers. Here, we demonstrate that multifunctional, nanoscale catalysts that enable high-performance photoelectrochemical energy conversion can be engineered by plasma-enhanced atomic layer deposition. The collective properties of tailored Co3O4/Co(OH)2 thin films simultaneously provide high activity for water splitting, permit efficient interfacial charge transport from semiconductor substrates, and enhance durability of chemically sensitive interfaces. These films comprise compact and continuous nanocrystalline Co3O4 spinel that is impervious to phase transformation and impermeable to ions, thereby providing effective protection of the underlying substrate. Moreover, a secondary phase of structurally disordered and chemically labile Co(OH)2 is introduced to ensure a high concentration of catalytically active sites. Application of this coating to photovoltaic p+n-Si junctions yields best reported performance characteristics for crystalline Si photoanodes.

GEMPIC: geometric electromagnetic particle-in-cell methods

NASA Astrophysics Data System (ADS)

Kraus, Michael; Kormann, Katharina; Morrison, Philip J.; Sonnendrücker, Eric

2017-08-01

We present a novel framework for finite element particle-in-cell methods based on the discretization of the underlying Hamiltonian structure of the Vlasov-Maxwell system. We derive a semi-discrete Poisson bracket, which retains the defining properties of a bracket, anti-symmetry and the Jacobi identity, as well as conservation of its Casimir invariants, implying that the semi-discrete system is still a Hamiltonian system. In order to obtain a fully discrete Poisson integrator, the semi-discrete bracket is used in conjunction with Hamiltonian splitting methods for integration in time. Techniques from finite element exterior calculus ensure conservation of the divergence of the magnetic field and Gauss' law as well as stability of the field solver. The resulting methods are gauge invariant, feature exact charge conservation and show excellent long-time energy and momentum behaviour. Due to the generality of our framework, these conservation properties are guaranteed independently of a particular choice of the finite element basis, as long as the corresponding finite element spaces satisfy certain compatibility conditions.

Experiments on integral length scale control in atmospheric boundary layer wind tunnel

NASA Astrophysics Data System (ADS)

Varshney, Kapil; Poddar, Kamal

2011-11-01

Accurate predictions of turbulent characteristics in the atmospheric boundary layer (ABL) depends on understanding the effects of surface roughness on the spatial distribution of velocity, turbulence intensity, and turbulence length scales. Simulation of the ABL characteristics have been performed in a short test section length wind tunnel to determine the appropriate length scale factor for modeling, which ensures correct aeroelastic behavior of structural models for non-aerodynamic applications. The ABL characteristics have been simulated by using various configurations of passive devices such as vortex generators, air barriers, and slot in the test section floor which was extended into the contraction cone. Mean velocity and velocity fluctuations have been measured using a hot-wire anemometry system. Mean velocity, turbulence intensity, turbulence scale, and power spectral density of velocity fluctuations have been obtained from the experiments for various configuration of the passive devices. It is shown that the integral length scale factor can be controlled using various combinations of the passive devices.

Integration of human factors and ergonomics during medical device design and development: it's all about communication.

PubMed

Vincent, Christopher James; Li, Yunqiu; Blandford, Ann

2014-05-01

Manufacturers of interactive medical devices, such as infusion pumps, need to ensure that devices minimise the risk of unintended harm during use. However, development teams face challenges in incorporating Human Factors. The aim of the research reported here was to better understand the constraints under which medical device design and development take place. We report the results of a qualitative study based on 19 semi-structured interviews with professionals involved in the design, development and deployment of interactive medical devices. A thematic analysis was conducted. Multiple barriers to designing for safety and usability were identified. In particular, we identified barriers to communication both between the development organisation and the intended users and between different teams within the development organisation. We propose the use of mediating representations. Artefacts such as personas and scenarios, known to provide integration across multiple perspectives, are an essential component of designing for safety and usability. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Novel Hybrid Ablative/Ceramic Heatshield for Earth Atmospheric Re-Entry

NASA Astrophysics Data System (ADS)

Barcena, J.; Florez, S.; Perez, B.; Pinaud, G.; Bouilly, J.-M.; Fischer, W. P. P.; de Montburn, A.; Descomps, M.; Zuber, C.; Rotaermel, W.; Hald, H.; Pereira, C.; Mergia, K.; Triantou, K.; Marinou, A.; Vekinis, G.; Ionescu, G.; Ban, C.; Stefan, A.; Leroy, V.; Bernard, D.; Massuti, B.; Herdrich, G.

2014-06-01

Original approaches based on ablative materials and novel TPS solutions are required for space applications, where resistance to extreme oxidative environments and high temperatures are required. For future space exploration the demands for the thermal shield go beyond the current state-of-the-art. Therefore, the development of new thermal protection materials and systems at a reasonable mass budget is absolutely essential to ensure European non-dependence on corresponding restricted technologies. The three year long FP7 project HYDRA aims at the development of a novel thermal protection system through the integration of a low density ablative outer-shield on top of an advanced thermo-structural ceramic composite layer and will provide an innovative technology solution consistent with the capabilities of European technologies and material providers. This paper summarizes the current status of the scientific activities carried out after two years of progress in terms of design, integration and verification of a robust and lightweight thermal shield solution for atmospheric earth re-entry.

Minimizing Surface Exposure to Climate Extremity in Coastal Megacities by Structure Remodelling using Integral Geographic Information System: Lessons from Greater Mumbai Metropolitan

NASA Astrophysics Data System (ADS)

Tiwari, A.

2016-12-01

Coastal metropolitans in South Asia represent the most densely populated and congested urban spaces ranking among the largest urban settlements of the planet. These megacities are characterized by inadequate infrastructure, lack of mitigation tools, and weak resilience of urban ecosystems. Additionally, climate change has increased vulnerability of poor and marginalized population living in rapidly growing coastal megacities to increased frequency, severity and intensity of extreme weather events. This has adversely affected local counter strategies and adaptation tools, transforming such events into hazards with the inability to respond and mitigate. Study aimed to develop a participatory framework for risk reduction in Greater Mumbai Metropolitan by Structure Remodeling (SR) in integral GIS. Research utilized terrain analysis tools and vulnerability mapping, and identified risk susceptible fabric and checked its scope for SR without: 1.adding to its (often) complex fragmentation, and 2.without interference with the ecosystem services accommodated by it. Surfaces available included paved ground, streetscapes commercial facades, rooftops,public spaces, open as well as dark spaces. Remodeling altered certain characteristics in the intrinsic or extrinsic cross-section profile or in both (if suitable) with infrastructure measures (grey, green, blue) that collectively involved ecosystem services and maintained natural hydrological connection. This method fairly reduced exposure of vulnerable surface and minimized risk to achieve extremity-neutral state. Harmonizing with public perception and incorporating priorities of local authorities, the method is significant as it rises above the fundamental challenges arising during management of (often) conflicting perspectives and interests of multiplicity of stakeholders involved at various levels in urban climate governance while ensuring inclusive solutions with reduced vulnerability and increased resilience. Additionally this method has vast potential to replicate for climate smart planning beyond the study region as it clearly ensures barrier free climate-communication process for decision making while looking for long term feasible outcomes of remodeled surface through the most affordable and innovative tools.

X Chromosome Crossover Formation and Genome Stability in Caenorhabditis elegans Are Independently Regulated by xnd-1

PubMed Central

McClendon, T. Brooke; Mainpal, Rana; Amrit, Francis R. G.; Krause, Michael W.; Ghazi, Arjumand; Yanowitz, Judith L.

2016-01-01

The germ line efficiently combats numerous genotoxic insults to ensure the high fidelity propagation of unaltered genomic information across generations. Yet, germ cells in most metazoans also intentionally create double-strand breaks (DSBs) to promote DNA exchange between parental chromosomes, a process known as crossing over. Homologous recombination is employed in the repair of both genotoxic lesions and programmed DSBs, and many of the core DNA repair proteins function in both processes. In addition, DNA repair efficiency and crossover (CO) distribution are both influenced by local and global differences in chromatin structure, yet the interplay between chromatin structure, genome integrity, and meiotic fidelity is still poorly understood. We have used the xnd-1 mutant of Caenorhabditis elegans to explore the relationship between genome integrity and crossover formation. Known for its role in ensuring X chromosome CO formation and germ line development, we show that xnd-1 also regulates genome stability. xnd-1 mutants exhibited a mortal germ line, high embryonic lethality, high incidence of males, and sensitivity to ionizing radiation. We discovered that a hypomorphic allele of mys-1 suppressed these genome instability phenotypes of xnd-1, but did not suppress the CO defects, suggesting it serves as a separation-of-function allele. mys-1 encodes a histone acetyltransferase, whose homolog Tip60 acetylates H2AK5, a histone mark associated with transcriptional activation that is increased in xnd-1 mutant germ lines, raising the possibility that thresholds of H2AK5ac may differentially influence distinct germ line repair events. We also show that xnd-1 regulated him-5 transcriptionally, independently of mys-1, and that ectopic expression of him-5 suppressed the CO defects of xnd-1. Our work provides xnd-1 as a model in which to study the link between chromatin factors, gene expression, and genome stability. PMID:27678523

Polarized lepton-nucleon scattering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hughes, E.

1994-12-01

The author provides a summary of the proposed and published statistical (systematic) uncertainties from the world experiments on nucleon spin structure function integrals. By the time these programs are complete, there will be a vast resource of data on nucleon spin structure functions. Each program has quite different experimental approaches regarding the beams, targets, and spectrometers thus ensuring systematically independent tests of the spin structure function measurements. Since the field of spin structure function measurements began, there has been a result appearing approximately every five years. With advances in polarized target technology and high polarization in virtually all of themore » lepton beams, results are now coming out each year; this is a true signature of the growth in the field. Hopefully, the experiments will provide a consistent picture of nucleon spin structure at their completion. In summary, there are still many open questions regarding the internal spin structure of the nucleon. Tests of QCD via the investigation of the Bjorken sum rule is a prime motivator for the field, and will continue with the next round of precision experiments. The question of the origin of spin is still a fundamental problem. Researchers hope is that high-energy probes using spin will shed light on this intriguing mystery, in addition to characterizing the spin structure of the nucleon.« less

Evolution, current structure, and role of a primary care clinical pharmacy service in an integrated managed care organization.

PubMed

Heilmann, Rachel M F; Campbell, Stephanie M; Kroner, Beverly A; Proksel, Jenel R; Billups, Sarah J; Witt, Daniel M; Helling, Dennis K

2013-01-01

The impact of the declining number of primary care physicians is exacerbated by a growing elderly population in need of chronic disease management. Primary care clinical pharmacy specialists, with their unique knowledge and skill set, are well suited to address this gap. At Kaiser Permanente of Colorado (KPCO), primary care clinical pharmacy specialists have a long history of integration with medical practices and are located in close proximity to physicians, nurses, and other members of the health care team. Since 1992, Primary Care Clinical Pharmacy Services (PCCPS) has expanded from 4 to 30 full-time equivalents (FTEs) to provide services in all KPCO medical office buildings. With this growth in size, PCCPS has evolved to play a vital role in working with primary care medical teams to ensure that drug therapy is effective, safe, and affordable. In addition, PCCPS specialists provide ambulatory teaching sites for pharmacy students and pharmacy residents. There is approximately 1 specialist FTE for every 13,000 adult KPCO members and every 9 clinical FTEs of internal medicine and family medicine physicians. All clinical pharmacy specialists in the pharmacy department are required to have a PharmD degree, to complete postgraduate year 2 residencies, and, as a condition of employment, to become board certified in an applicable specialty. The evolution, current structure, and role of PCCPS at KPCO, including factors facilitating successful integration within the medical team, are highlighted. Patient and nonpatient care responsibilities are described.

Developing an integrated framework of problem-based learning and coaching psychology for medical education: a participatory research.

PubMed

Wang, Qing; Li, Huiping; Pang, Weiguo; Liang, Shuo; Su, Yiliang

2016-01-05

Medical schools have been making efforts to develop their own problem-based learning (PBL) approaches based on their educational conditions, human resources and existing curriculum structures. This study aimed to explore a new framework by integrating the essential features of PBL and coaching psychology applicable to the undergraduate medical education context. A participatory research design was employed. Four educational psychology researchers, eight undergraduate medical school students and two accredited PBL tutors participated in a four-month research programme. Data were collected through participatory observation, focus groups, semi-structured interviews, workshop documents and feedback surveys and then subjected to thematic content analysis. The triangulation of sources and member checking were used to ensure the credibility and trustworthiness of the research process. Five themes emerged from the analysis: current experience of PBL curriculum; the roles of and relationships between tutors and students; student group dynamics; development of self-directed learning; and coaching in PBL facilitation. On the basis of this empirical data, a systematic model of PBL and coaching psychology was developed. The findings highlighted that coaching psychology could be incorporated into the facilitation system in PBL. The integrated framework of PBL and coaching psychology in undergraduate medical education has the potential to promote the development of the learning goals of cultivating clinical reasoning ability, lifelong learning capacities and medical humanity. Challenges, benefits and future directions for implementing the framework are discussed in this paper.

Implications of Integrating Women into USMC Infantry

DTIC Science & Technology

2015-01-01

well-defined, updated, and clearly communicated sexual harassment policies; and procedures to ensure that women receive equal training and...traditionally male groups depends on the culture of the group: Groups more hostile to women experience lower cohesion after gender integration than do...creates a hostile environment for women. A variety of efforts can mitigate whatever detrimental effects integration of women would have on male -dominated

A Case Study of the Application of SAMR and TPACK for Reflection on Technology Integration into Two Social Studies Classrooms

ERIC Educational Resources Information Center

Hilton, Jason Theodore

2016-01-01

As emerging technology continues to enter the social studies classroom, teachers need to approach integration of such technology in a systematic manner to ensure that such technology enhances the learning of their students. Currently, scholars of technology integration advocate for the use of one of two different models, either SAMR or TPACK. This…

Authenticating cache

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Tyler Barratt; Urrea, Jorge Mario

2012-06-01

The aim of the Authenticating Cache architecture is to ensure that machine instructions in a Read Only Memory (ROM) are legitimate from the time the ROM image is signed (immediately after compilation) to the time they are placed in the cache for the processor to consume. The proposed architecture allows the detection of ROM image modifications during distribution or when it is loaded into memory. It also ensures that modified instructions will not execute in the processor-as the cache will not be loaded with a page that fails an integrity check. The authenticity of the instruction stream can also bemore » verified in this architecture. The combination of integrity and authenticity assurance greatly improves the security profile of a system.« less

Conflicts of interest for medical publishers and editors: protecting the integrity of scientific scholarship.

PubMed

Desai, Sapan S; Shortell, Cynthia K

2011-09-01

Competition of interest may exist at all levels in the medical publication process. Ensuring the integrity of scientific scholarship involves protecting editorial independence, promoting the use of scientific arbitration boards, promoting transparency throughout all stages of publication, and protecting the relationship between the publisher and its editors through an effective legal framework. It is incumbent upon the publisher, editors, authors, and readers to ensure that the highest standards of scientific scholarship are upheld. Doing so will help reduce fraud and misrepresentation in medical research and increase the trustworthiness of landmark findings in science. Copyright © 2011 Society for Vascular Surgery. Published by Mosby, Inc. All rights reserved.

Ensuring rigour and trustworthiness of qualitative research in clinical pharmacy.

PubMed

Hadi, Muhammad Abdul; José Closs, S

2016-06-01

The use of qualitative research methodology is well established for data generation within healthcare research generally and clinical pharmacy research specifically. In the past, qualitative research methodology has been criticized for lacking rigour, transparency, justification of data collection and analysis methods being used, and hence the integrity of findings. Demonstrating rigour in qualitative studies is essential so that the research findings have the "integrity" to make an impact on practice, policy or both. Unlike other healthcare disciplines, the issue of "quality" of qualitative research has not been discussed much in the clinical pharmacy discipline. The aim of this paper is to highlight the importance of rigour in qualitative research, present different philosophical standpoints on the issue of quality in qualitative research and to discuss briefly strategies to ensure rigour in qualitative research. Finally, a mini review of recent research is presented to illustrate the strategies reported by clinical pharmacy researchers to ensure rigour in their qualitative research studies.

The application of data encryption technology in computer network communication security

NASA Astrophysics Data System (ADS)

Gong, Lina; Zhang, Li; Zhang, Wei; Li, Xuhong; Wang, Xia; Pan, Wenwen

2017-04-01

With the rapid development of Intemet and the extensive application of computer technology, the security of information becomes more and more serious, and the information security technology with data encryption technology as the core has also been developed greatly. Data encryption technology not only can encrypt and decrypt data, but also can realize digital signature, authentication and authentication and other functions, thus ensuring the confidentiality, integrity and confirmation of data transmission over the network. In order to improve the security of data in network communication, in this paper, a hybrid encryption system is used to encrypt and decrypt the triple DES algorithm with high security, and the two keys are encrypted with RSA algorithm, thus ensuring the security of the triple DES key and solving the problem of key management; At the same time to realize digital signature using Java security software, to ensure data integrity and non-repudiation. Finally, the data encryption system is developed by Java language. The data encryption system is simple and effective, with good security and practicality.

Responsible science: Ensuring the integrity of the research process. Volume 1. Final report, 1989--1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

In 1989, the National Academy of Sciences, the National Academy of Engineering, and the Institute of Medicine initiated a major study to examine issues related to scientific responsibility and the conduct of research. This report thoughtfully examines the challenges posed in ensuring that the search for truth reflects adherence to ethical standards. In recent years we have learned that not all scientists adhere to this obligation. Issues of misconduct and integrity in science present complex questions. This report recommends specific actions that all scientists, their institutions, and their sponsors can take to preserve and strengthen the integrity of the researchmore » process and also to deal with allegations of misconduct. The recommendations provide a blueprint for encouraging and safeguarding the intellectual independence that is essential to doing the best science while also providing for fundamental accountability to those who sponsor and support scientific research.« less

46 CFR 154.1860 - Integral tanks: Cargo colder than −10 °C (14 °F).

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 5 2013-10-01 2013-10-01 false Integral tanks: Cargo colder than â10 °C (14 °F). 154....1860 Integral tanks: Cargo colder than −10 °C (14 °F). The master shall ensure that an integral tank does not carry a cargo colder than −10 °C (14 °F) unless that carriage is specially approved by the...

46 CFR 154.1860 - Integral tanks: Cargo colder than −10 °C (14 °F).

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Integral tanks: Cargo colder than â10 °C (14 °F). 154....1860 Integral tanks: Cargo colder than −10 °C (14 °F). The master shall ensure that an integral tank does not carry a cargo colder than −10 °C (14 °F) unless that carriage is specially approved by the...

46 CFR 154.1860 - Integral tanks: Cargo colder than −10 °C (14 °F).

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 5 2012-10-01 2012-10-01 false Integral tanks: Cargo colder than â10 °C (14 °F). 154....1860 Integral tanks: Cargo colder than −10 °C (14 °F). The master shall ensure that an integral tank does not carry a cargo colder than −10 °C (14 °F) unless that carriage is specially approved by the...

46 CFR 154.1860 - Integral tanks: Cargo colder than −10 °C (14 °F).

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Integral tanks: Cargo colder than â10 °C (14 °F). 154....1860 Integral tanks: Cargo colder than −10 °C (14 °F). The master shall ensure that an integral tank does not carry a cargo colder than −10 °C (14 °F) unless that carriage is specially approved by the...

46 CFR 154.1860 - Integral tanks: Cargo colder than −10 °C (14 °F).

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Integral tanks: Cargo colder than â10 °C (14 °F). 154....1860 Integral tanks: Cargo colder than −10 °C (14 °F). The master shall ensure that an integral tank does not carry a cargo colder than −10 °C (14 °F) unless that carriage is specially approved by the...

Advances in forest hydrology: challenges and opportunities

Treesearch

D.M. Amatya; K.R. Douglas-Mankin; T.M. Williams; R.W. Skaggs; J.E. Nettles

2011-01-01

Forests are an integral component of the landscape, and maintaining their functional integrity is fundamental for the sustainability of ecosystems and societies alike. Tools, innovations, and practices, analogous to those developed to improve agricultural production and quantify environmental impacts, are needed to ensure the sustainability of these forested landscapes...

Confusion about Collusion: Working Together and Academic Integrity

ERIC Educational Resources Information Center

Sutton, Anna; Taylor, David

2011-01-01

An increasing emphasis on developing students' transferable skills, such as group working and IT, is creating challenges in ensuring the academic integrity of individually assessed coursework. This study investigated the frequency with which students engaged in a range of study behaviours for individual assignments, with a focus on the extent to…

4Bs or Not 4Bs: Bricks, Bytes, Brains, and Bandwidth

ERIC Educational Resources Information Center

Treat, Tod

2011-01-01

The effective integration of planning to include bricks, bytes, brains, and bandwidth (the 4Bs) represents an opportunity for community colleges to extend their capacity as knowledge-intensive organizations, coupling knowledge, technology, and learning. Integration is important to ensure that the interplay among organizations, agents within them,…

76 FR 70896 - Polyethylene Glycol; Tolerance Exemption

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

... a finite tolerance is not necessary to ensure that there is a reasonable certainty that no harm will... integral part of its composition the atomic elements carbon, hydrogen, and oxygen. 3. The polymer does not contain as an integral part of its composition, except as impurities, any element other than those listed...

48 CFR 52.215-14 - Integrity of Unit Prices.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Integrity of Unit Prices. 52.215-14 Section 52.215-14 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... supplies shall distribute costs within contracts on a basis that ensures that unit prices are in proportion...

76 FR 68791 - Notice of Availability for Public Comment on the Interagency Ocean Observing Committee Draft...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-07

... NATIONAL SCIENCE FOUNDATION Notice of Availability for Public Comment on the Interagency Ocean Observing Committee Draft Certification Criteria for Non-Federal Asset Integration Into IOOS AGENCY... eligibility for integration into the System and to ensure compliance with all applicable standards and...

The Integration of Children Dependent on Medical Technology into Public Schools

ERIC Educational Resources Information Center

Raymond, Jill A.

2009-01-01

Advances in medicine have increased the survival rates of children with complex medical conditions, including those who are dependent on technology such as ventilators and tracheostomies. The process of integrating children dependent on medical technology into public schools requires the collaboration of a multidisciplinary team to ensure that…

Cultural Competence Integration in the Nursing Curriculum

ERIC Educational Resources Information Center

Stegman, Boniface C.

2013-01-01

With an increasingly diverse population, it is important to ensure that graduates of nursing programs are able to deliver culturally competent care (Krainovich-Miller et al., 2008; Allen, 2010). This study was undertaken to address this call to include cultural competence integration into nursing curriculum. The purpose of this study was to…

A Secondary Guy: Physically Disabled Teenagers in Secondary Schools.

ERIC Educational Resources Information Center

Doubt, Lorna; McColl, Mary Ann

2003-01-01

A phenomenological study of seven teenagers with physical disabilities attending a regular secondary school focused on social integration and the factors influencing it. Results showed extrinsic and intrinsic factors that facilitate or limit integration. Occupational therapists can ensure that schools are inclusive and that clients are capable of…

Integrated Analytic and Linearized Inverse Kinematics for Precise Full Body Interactions

NASA Astrophysics Data System (ADS)

Boulic, Ronan; Raunhardt, Daniel

Despite the large success of games grounded on movement-based interactions the current state of full body motion capture technologies still prevents the exploitation of precise interactions with complex environments. This paper focuses on ensuring a precise spatial correspondence between the user and the avatar. We build upon our past effort in human postural control with a Prioritized Inverse Kinematics framework. One of its key advantage is to ease the dynamic combination of postural and collision avoidance constraints. However its reliance on a linearized approximation of the problem makes it vulnerable to the well-known full extension singularity of the limbs. In such context the tracking performance is reduced and/or less believable intermediate postural solutions are produced. We address this issue by introducing a new type of analytic constraint that smoothly integrates within the prioritized Inverse Kinematics framework. The paper first recalls the background of full body 3D interactions and the advantages and drawbacks of the linearized IK solution. Then the Flexion-EXTension constraint (FLEXT in short) is introduced for the partial position control of limb-like articulated structures. Comparative results illustrate the interest of this new type of integrated analytical and linearized IK control.

Sputtered Pd as Hydrogen Storage for a Chip-Integrated Microenergy System

PubMed Central

Slavcheva, E.; Ganske, G.; Schnakenberg, U.

2014-01-01

The work presents a research on preparation and physical and electrochemical characterisation of dc magnetron sputtered Pd films envisaged for application as hydrogen storage in a chip-integrated hydrogen microenergy system. The influence of the changes in the sputtering pressure on the surface structure, morphology, and roughness was analysed by X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AMF). The electrochemical activity towards hydrogen adsorption/desorption and formation of PdH were investigated in 0.5 M H2SO4 using the methods of cyclic voltammetry and galvanostatic polarisation. The changes in the electrical properties of the films as a function of the sputtering pressure and the level of hydrogenation were evaluated before and immediately after the electrochemical charging tests, using a four-probe technique. The research resulted in establishment of optimal sputter regime, ensuring fully reproducible Pd layers with highly developed surface, moderate porosity, and mechanical stability. Selected samples were integrated as hydrogen storage in a newly developed unitized microenergy system and tested in charging (water electrolysis) and discharging (fuel cell) operative mode at ambient conditions demonstrating a stable recycling performance. PMID:24516356

Computerized engineering logic for nuclear procurement and dedication processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tulay, M.P.

1996-12-31

In an attempt to better meet the needs of operations and maintenance organizations, many nuclear utility procurement engineering groups have simplified their procedures, developed on-line tools for performing the specification of replacement items, and developed relational databases containing part-level information necessary to automate the procurement process. Although these improvements have helped to reduce the engineering necessary to properly specify and accept/dedicate items for nuclear safety-related applications, a number of utilities have recognized that additional long-term savings can be realized by integrating a computerized logic to assist technical procurement engineering personnel. The most commonly used logic follows the generic processes containedmore » in Electric Power Research Institute (EPRI) published guidelines. The processes are typically customized to some extent to accommodate each utility`s organizational structure, operating procedures, and strategic goals. This paper will discuss a typical logic that integrates the technical evaluation, acceptance, and receipt inspection and testing processes. The logic this paper will describe has been successfully integrated at a growing number of nuclear utilities and has produced numerous positive results. The application of the logic ensures that utility-wide standards or procedures, common among multi-site utilities, are followed.« less

Maximizing work integration in job placement of individuals facing mental health problems: Supervisor experiences.

PubMed

Skarpaas, Lisebet Skeie; Ramvi, Ellen; Løvereide, Lise; Aas, Randi Wågø

2015-01-01

Many people confronting mental health problems are excluded from participation in paid work. Supervisor engagement is essential for successful job placement. To elicit supervisor perspectives on the challenges involved in fostering integration to support individuals with mental health problems (trainees) in their job placement at ordinary companies. Explorative, qualitative designed study with a phenomenological approach, based on semi-structured interviews with 15 supervisors involved in job placements for a total of 105 trainees (mean 7, min-max. 1-30, SD 8). Data were analysed using qualitative content analysis. Superviors experience two interrelated dilemmas concerning knowledge of the trainee and degree of preferential treatment. Challenges to obtaining successful integration were; motivational: 1) Supervisors previous experience with trainees encourages future engagement, 2) Developing a realistic picture of the situation, and 3) Disclosure and knowledge of mental health problems, and continuity challenges: 4) Sustaining trainee cooperation throughout the placement process, 5) Building and maintaining a good relationship between supervisor and trainee, and 6) Ensuring continuous cooperation with the social security system and other stakeholders. Supervisors experience relational dilemmas regarding pre-judgment, privacy and equality. Job placement seem to be maximized when the stakeholders are motivated and recognize that cooperation must be a continuous process.

Exploration Medical Capability System Engineering Introduction and Vision

NASA Technical Reports Server (NTRS)

Mindock, J.; Reilly, J.

2017-01-01

Human exploration missions to beyond low Earth orbit destinations such as Mars will require more autonomous capability compared to current low Earth orbit operations. For the medical system, lack of consumable resupply, evacuation opportunities, and real-time ground support are key drivers toward greater autonomy. Recognition of the limited mission and vehicle resources available to carry out exploration missions motivates the Exploration Medical Capability (ExMC) Element's approach to enabling the necessary autonomy. The Element's work must integrate with the overall exploration mission and vehicle design efforts to successfully provide exploration medical capabilities. ExMC is applying systems engineering principles and practices to accomplish its integrative goals. This talk will briefly introduce the discipline of systems engineering and key points in its application to exploration medical capability development. It will elucidate technical medical system needs to be met by the systems engineering work, and the structured and integrative science and engineering approach to satisfying those needs, including the development of shared mental and qualitative models within and external to the human health and performance community. These efforts are underway to ensure relevancy to exploration system maturation and to establish medical system development that is collaborative with vehicle and mission design and engineering efforts.

Mechanical design in embryos: mechanical signalling, robustness and developmental defects.

PubMed

Davidson, Lance A

2017-05-19

Embryos are shaped by the precise application of force against the resistant structures of multicellular tissues. Forces may be generated, guided and resisted by cells, extracellular matrix, interstitial fluids, and how they are organized and bound within the tissue's architecture. In this review, we summarize our current thoughts on the multiple roles of mechanics in direct shaping, mechanical signalling and robustness of development. Genetic programmes of development interact with environmental cues to direct the composition of the early embryo and endow cells with active force production. Biophysical advances now provide experimental tools to measure mechanical resistance and collective forces during morphogenesis and are allowing integration of this field with studies of signalling and patterning during development. We focus this review on concepts that highlight this integration, and how the unique contributions of mechanical cues and gradients might be tested side by side with conventional signalling systems. We conclude with speculation on the integration of large-scale programmes of development, and how mechanical responses may ensure robust development and serve as constraints on programmes of tissue self-assembly.This article is part of the themed issue 'Systems morphodynamics: understanding the development of tissue hardware'. © 2017 The Author(s).

A One System Integrated Approach to Simulant Selection for Hanford High Level Waste Mixing and Sampling Tests - 13342

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thien, Mike G.; Barnes, Steve M.

2013-07-01

The Hanford Tank Operations Contractor (TOC) and the Hanford Waste Treatment and Immobilization Plant (WTP) contractor are both engaged in demonstrating mixing, sampling, and transfer system capabilities using simulated Hanford High-Level Waste (HLW) formulations. This represents one of the largest remaining technical issues with the high-level waste treatment mission at Hanford. Previous testing has focused on very specific TOC or WTP test objectives and consequently the simulants were narrowly focused on those test needs. A key attribute in the Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 2010-2 is to ensure testing is performed with a simulant that represents the broadmore » spectrum of Hanford waste. The One System Integrated Project Team is a new joint TOC and WTP organization intended to ensure technical integration of specific TOC and WTP systems and testing. A new approach to simulant definition has been mutually developed that will meet both TOC and WTP test objectives for the delivery and receipt of HLW. The process used to identify critical simulant characteristics, incorporate lessons learned from previous testing, and identify specific simulant targets that ensure TOC and WTP testing addresses the broad spectrum of Hanford waste characteristics that are important to mixing, sampling, and transfer performance are described. (authors)« less

Responsible science: Ensuring the integrity of the research process, volume 1

NASA Astrophysics Data System (ADS)

This report thoughtfully examines the challenges posed in ensuring that the search for truth reflects adherence to ethical standards. In recent years, we have learned, sometimes painfully, that not all scientists adhere to this obligation. Reports of falsified research results and plagiarism involving both junior and senior scientists have stimulated doubts and criticism about the ways in which misconduct in science is addressed by the research community. Misconduct in science is now being publicly examined in all of its aspects; how misconduct is defined, the process by which misconduct is discovered, and procedures for judging innocence or guilt and assessing penalties. Also being explored are the appropriate roles of individuals, research institutions, journals, government research agencies, and the legal system. Issues of misconduct and integrity in science present complex questions. These issues require the sustained attention of all members of the research community as well as of leaders in the public and private sector who are concerned with safeguarding the health of science. In this regard ensuring the integrity of the research process is similar to assuring safety in the workplace: it is a process that requires continued participation from all levels of the entire research enterprise--the practitioners, the host institutions, the sponsors in government, and the legislators who provide the funds.

Inspection of anode and field wires for the COMPASS drift chamber, DC5, with Environmental Scanning Electron Microscope

NASA Astrophysics Data System (ADS)

Cyuzuzo, Sonia

2014-09-01

The COMPASS experiment at CERN uses a secondary pion beam from the Super Proton Synchrotron (SPS) at CERN to explore the spin structure of nucleons. A new drift chamber, DC5, will be integrated into the COMPASS spectrometer to replace an aging straw tube detector. DC5 will detect muon pairs from Drell-Yan scattering of a pion-beam off a transversely polarized proton target. This data will be used to determine the correlation between transverse proton spin and the intrinsic transverse momentum of up-quarks inside the proton, the Sivers effect. DC5 is a large area planar drift chamber with 8 layers of anode-frames made of G10 fiberglass-epoxy. The G10 frames support printed circuit boards for soldering 20 μm diameter anode and 100 μm diameter field wires. The anode planes are sandwiched by 13 graphite coated Mylar cathode planes. To ensure a well-functioning of DC5, the wires were carefully tested. An optical inspection and a spectral analysis was performed with an Environmental Scanning Electron Microscope (ESEM) to verify the composition and dimensions and the integrity of the gold plating on the surface of these wires. The spectra of the wires were studied at 10 and 30 keV. The COMPASS experiment at CERN uses a secondary pion beam from the Super Proton Synchrotron (SPS) at CERN to explore the spin structure of nucleons. A new drift chamber, DC5, will be integrated into the COMPASS spectrometer to replace an aging straw tube detector. DC5 will detect muon pairs from Drell-Yan scattering of a pion-beam off a transversely polarized proton target. This data will be used to determine the correlation between transverse proton spin and the intrinsic transverse momentum of up-quarks inside the proton, the Sivers effect. DC5 is a large area planar drift chamber with 8 layers of anode-frames made of G10 fiberglass-epoxy. The G10 frames support printed circuit boards for soldering 20 μm diameter anode and 100 μm diameter field wires. The anode planes are sandwiched by 13 graphite coated Mylar cathode planes. To ensure a well-functioning of DC5, the wires were carefully tested. An optical inspection and a spectral analysis was performed with an Environmental Scanning Electron Microscope (ESEM) to verify the composition and dimensions and the integrity of the gold plating on the surface of these wires. The spectra of the wires were studied at 10 and 30 keV. Acknowledging NSF and UIUC.

DOE Office of Scientific and Technical Information (OSTI.GOV)

MANI,SEETHAMBAL S.; FLEMING,JAMES G.; WALRAVEN,JEREMY A.

Two major problems associated with Si-based MEMS (MicroElectroMechanical Systems) devices are stiction and wear. Surface modifications are needed to reduce both adhesion and friction in micromechanical structures to solve these problems. In this paper, the authors present a CVD (Chemical Vapor Deposition) process that selectively coats MEMS devices with tungsten and significantly enhances device durability. Tungsten CVD is used in the integrated-circuit industry, which makes this approach manufacturable. This selective deposition process results in a very conformal coating and can potentially address both stiction and wear problems confronting MEMS processing. The selective deposition of tungsten is accomplished through the siliconmore » reduction of WF{sub 6}. The self-limiting nature of the process ensures consistent process control. The tungsten is deposited after the removal of the sacrificial oxides to minimize stress and process integration problems. The tungsten coating adheres well and is hard and conducting, which enhances performance for numerous devices. Furthermore, since the deposited tungsten infiltrates under adhered silicon parts and the volume of W deposited is less than the amount of Si consumed, it appears to be possible to release adhered parts that are contacted over small areas such as dimples. The wear resistance of tungsten coated parts has been shown to be significantly improved by microengine test structures.« less

Open chemistry: RESTful web APIs, JSON, NWChem and the modern web application.

PubMed

Hanwell, Marcus D; de Jong, Wibe A; Harris, Christopher J

2017-10-30

An end-to-end platform for chemical science research has been developed that integrates data from computational and experimental approaches through a modern web-based interface. The platform offers an interactive visualization and analytics environment that functions well on mobile, laptop and desktop devices. It offers pragmatic solutions to ensure that large and complex data sets are more accessible. Existing desktop applications/frameworks were extended to integrate with high-performance computing resources, and offer command-line tools to automate interaction-connecting distributed teams to this software platform on their own terms. The platform was developed openly, and all source code hosted on the GitHub platform with automated deployment possible using Ansible coupled with standard Ubuntu-based machine images deployed to cloud machines. The platform is designed to enable teams to reap the benefits of the connected web-going beyond what conventional search and analytics platforms offer in this area. It also has the goal of offering federated instances, that can be customized to the sites/research performed. Data gets stored using JSON, extending upon previous approaches using XML, building structures that support computational chemistry calculations. These structures were developed to make it easy to process data across different languages, and send data to a JavaScript-based web client.

Marketing-oriented organizations: an integrated approach.

PubMed

Stensrud, R; Arrington, B

1988-03-01

Organizations can be oriented toward marketing from a production, product, sales, or marketing perspective. Strategies, structures, and cultures, which reflect a company's basic orientation, must be integrated to ensure that marketing efforts communicate a clear corporate position. In a study of 31 hospitals, the Center for Health Services Education Research, St. Louis University, found that no hospital's organization fit neatly into a single category. For example, a hospital may have some service lines that were marketing oriented while other lines were production oriented. The majority of hospitals, however, were product oriented, focusing on productivity and financial performance rather than on market factors. The most effective sales orientation was observed in the for-profits. Their selling efforts, however, tended to be internally focused, with product development activities divorced from the planning and marketing functions. Only the for-profit hospitals showed the beginning of a marketing orientation. Developing a marketing orientation, especially in line divisions, requires a careful, well-orchestrated effort and the presence of several key factors: Access to capital and an emphasis on long-range planning and strategic spending The availability of hospital-specific market research. Key distribution channels. Talented middle managers. Up-to-date systems and structures equipped to serve new values and strategies. Leaders capable of communicating to the organization a vision of its role in the community.

Open chemistry: RESTful web APIs, JSON, NWChem and the modern web application

DOE PAGES

Hanwell, Marcus D.; de Jong, Wibe A.; Harris, Christopher J.

2017-10-30

An end-to-end platform for chemical science research has been developed that integrates data from computational and experimental approaches through a modern web-based interface. The platform offers an interactive visualization and analytics environment that functions well on mobile, laptop and desktop devices. It offers pragmatic solutions to ensure that large and complex data sets are more accessible. Existing desktop applications/frameworks were extended to integrate with high-performance computing resources, and offer command-line tools to automate interaction - connecting distributed teams to this software platform on their own terms. The platform was developed openly, and all source code hosted on the GitHub platformmore » with automated deployment possible using Ansible coupled with standard Ubuntu-based machine images deployed to cloud machines. The platform is designed to enable teams to reap the benefits of the connected web - going beyond what conventional search and analytics platforms offer in this area. It also has the goal of offering federated instances, that can be customized to the sites/research performed. Data gets stored using JSON, extending upon previous approaches using XML, building structures that support computational chemistry calculations. These structures were developed to make it easy to process data across different languages, and send data to a JavaScript-based web client.« less

Open chemistry: RESTful web APIs, JSON, NWChem and the modern web application

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanwell, Marcus D.; de Jong, Wibe A.; Harris, Christopher J.

An end-to-end platform for chemical science research has been developed that integrates data from computational and experimental approaches through a modern web-based interface. The platform offers an interactive visualization and analytics environment that functions well on mobile, laptop and desktop devices. It offers pragmatic solutions to ensure that large and complex data sets are more accessible. Existing desktop applications/frameworks were extended to integrate with high-performance computing resources, and offer command-line tools to automate interaction - connecting distributed teams to this software platform on their own terms. The platform was developed openly, and all source code hosted on the GitHub platformmore » with automated deployment possible using Ansible coupled with standard Ubuntu-based machine images deployed to cloud machines. The platform is designed to enable teams to reap the benefits of the connected web - going beyond what conventional search and analytics platforms offer in this area. It also has the goal of offering federated instances, that can be customized to the sites/research performed. Data gets stored using JSON, extending upon previous approaches using XML, building structures that support computational chemistry calculations. These structures were developed to make it easy to process data across different languages, and send data to a JavaScript-based web client.« less

Integrating care for older people with complex needs: key insights and lessons from a seven-country cross-case analysis.

PubMed

Wodchis, Walter P; Dixon, Anna; Anderson, Geoff M; Goodwin, Nick

2015-01-01

To address the challenges of caring for a growing number of older people with a mix of both health problems and functional impairment, programmes in different countries have different approaches to integrating health and social service supports. The goal of this analysis is to identify important lessons for policy makers and service providers to enable better design, implementation and spread of successful integrated care models. This paper provides a structured cross-case synthesis of seven integrated care programmes in Australia, Canada, the Netherlands, New Zealand, Sweden, the UK and the USA. All seven programmes involved bottom-up innovation driven by local needs and included: (1) a single point of entry, (2) holistic care assessments, (3) comprehensive care planning, (4) care co-ordination and (5) a well-connected provider network. The process of achieving successful integration involves collaboration and, although the specific types of collaboration varied considerably across the seven case studies, all involved a care coordinator or case manager. Most programmes were not systematically evaluated but the two with formal external evaluations showed benefit and have been expanded. Case managers or care coordinators who support patient-centred collaborative care are key to successful integration in all our cases as are policies that provide funds and support for local initiatives that allow for bottom-up innovation. However, more robust and systematic evaluation of these initiatives is needed to clarify the 'business case' for integrated health and social care and to ensure successful generalization of local successes.

A multiple hypotheses uncertainty analysis in hydrological modelling: about model structure, landscape parameterization, and numerical integration

NASA Astrophysics Data System (ADS)

Pilz, Tobias; Francke, Till; Bronstert, Axel

2016-04-01

Until today a large number of competing computer models has been developed to understand hydrological processes and to simulate and predict streamflow dynamics of rivers. This is primarily the result of a lack of a unified theory in catchment hydrology due to insufficient process understanding and uncertainties related to model development and application. Therefore, the goal of this study is to analyze the uncertainty structure of a process-based hydrological catchment model employing a multiple hypotheses approach. The study focuses on three major problems that have received only little attention in previous investigations. First, to estimate the impact of model structural uncertainty by employing several alternative representations for each simulated process. Second, explore the influence of landscape discretization and parameterization from multiple datasets and user decisions. Third, employ several numerical solvers for the integration of the governing ordinary differential equations to study the effect on simulation results. The generated ensemble of model hypotheses is then analyzed and the three sources of uncertainty compared against each other. To ensure consistency and comparability all model structures and numerical solvers are implemented within a single simulation environment. First results suggest that the selection of a sophisticated numerical solver for the differential equations positively affects simulation outcomes. However, already some simple and easy to implement explicit methods perform surprisingly well and need less computational efforts than more advanced but time consuming implicit techniques. There is general evidence that ambiguous and subjective user decisions form a major source of uncertainty and can greatly influence model development and application at all stages.

Wireless Sensing Opportunities for Aerospace Applications

NASA Technical Reports Server (NTRS)

Wilson, William; Atkinson, Gary

2007-01-01

Wireless sensors and sensor networks is an emerging technology area with many applications within the aerospace industry. Integrated vehicle health monitoring (IVHM) of aerospace vehicles is needed to ensure the safety of the crew and the vehicle, yet often high costs, weight, size and other constraints prevent the incorporation of instrumentation onto spacecraft. This paper presents a few of the areas such as IVHM, where new wireless sensing technology is needed on both existing vehicles as well as future spacecraft. From ground tests to inflatable structures to the International Space Station, many applications could receive benefits from small, low power, wireless sensors. This paper also highlights some of the challenges that need to overcome when implementing wireless sensor networks for aerospace vehicles.

Using high thermal stability flexible thin film thermoelectric generator at moderate temperature

NASA Astrophysics Data System (ADS)

Zheng, Zhuang-Hao; Luo, Jing-Ting; Chen, Tian-Bao; Zhang, Xiang-Hua; Liang, Guang-Xing; Fan, Ping

2018-04-01

Flexible thin film thermoelectric devices are extensively used in the microscale industry for powering wearable electronics. In this study, comprehensive optimization was conducted in materials and connection design for fabricating a high thermal stability flexible thin film thermoelectric generator. First, the thin films in the generator, including the electrodes, were prepared by magnetron sputtering deposition. The "NiCu-Cu-NiCu" multilayer electrode structure was applied to ensure the thermal stability of the device used at moderate temperature in an air atmosphere. A design with metal layer bonding and series accordant connection was then employed. The maximum efficiency of a single PN thermocouple generator is >11%, and the output power loss of the generator is <10% after integration.

Atrx promotes heterochromatin formation at retrotransposons

PubMed Central

Sadic, Dennis; Schmidt, Katharina; Groh, Sophia; Kondofersky, Ivan; Ellwart, Joachim; Fuchs, Christiane; Theis, Fabian J; Schotta, Gunnar

2015-01-01

More than 50% of mammalian genomes consist of retrotransposon sequences. Silencing of retrotransposons by heterochromatin is essential to ensure genomic stability and transcriptional integrity. Here, we identified a short sequence element in intracisternal A particle (IAP) retrotransposons that is sufficient to trigger heterochromatin formation. We used this sequence in a genome-wide shRNA screen and identified the chromatin remodeler Atrx as a novel regulator of IAP silencing. Atrx binds to IAP elements and is necessary for efficient heterochromatin formation. In addition, Atrx facilitates a robust and largely inaccessible heterochromatin structure as Atrx knockout cells display increased chromatin accessibility at retrotransposons and non-repetitive heterochromatic loci. In summary, we demonstrate a direct role of Atrx in the establishment and robust maintenance of heterochromatin. PMID:26012739

Recycling Expensive Medication: Why Not?

PubMed Central

Pomerantz, Jay M

2004-01-01

New (and proposed) advances in packaging, preserving, labeling, and verifying product integrity of individual tablets and capsules may allow for the recycling of certain expensive medicines. Previously sold, but unused, medication, if brought back to special pharmacies for resale or donation, may provide a low-cost source of patent-protected medicines. Benefits of such a program go beyond simply providing affordable medication to the poor. This article suggests that medicine recycling may be a possibility (especially if manufacturers are mandated to blister-package and bar-code individual tablets and capsules). This early discussion of medication recycling identifies relevant issues, such as: need, rationale, existing programs, available supplies, expiration dates, new technology for ensuring safety and potency, environmental impact, public health benefits, program focus, program structure, and liability. PMID:15266231

The role of veterinary research laboratories in the provision of veterinary services.

PubMed

Verwoerd, D W

1998-08-01

Veterinary research laboratories play an essential role in the provision of veterinary services in most countries. These laboratories are the source of new knowledge, innovative ideas and improved technology for the surveillance, prevention and control of animal diseases. In addition, many laboratories provide diagnostic and other services. To ensure the optimal integration of various veterinary activities, administrators must understand the functions and constraints of research laboratories. Therefore, a brief discussion is presented of the following: organisational structures methods for developing research programmes outputs of research scientists and how these are measured the management of quality assurance funding of research. Optimal collaboration can only be attained by understanding the environment in which a research scientist functions and the motivational issues at stake.

A pivotal-based approach for enterprise business process and IS integration

NASA Astrophysics Data System (ADS)

Ulmer, Jean-Stéphane; Belaud, Jean-Pierre; Le Lann, Jean-Marc

2013-02-01

A company must be able to describe and react against any endogenous or exogenous event. Such flexibility can be achieved through business process management (BPM). Nevertheless a BPM approach highlights complex relations between business and IT domains. A non-alignment is exposed between heterogeneous models: this is the 'business-IT gap' as described in the literature. Through concepts from business engineering and information systems driven by models and IT, we define a generic approach ensuring multi-view consistency. Its role is to maintain and provide all information related to the structure and semantic of models. Allowing the full return of a transformed model in the sense of reverse engineering, our platform enables synchronisation between analysis model and implementation model.

Hanford Double-Shell Tank Inspection Annual Report Calendar Year 2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petermann, Tasha M.; Boomer, Kayle D.; Washenfelder, D. J.

2013-12-02

The double-shell tanks (DSTs) were constructed between 1968 and 1986. They will have exceeded their design life before the waste can be removed and trasferred to the Waste Treatment and Immobilization Plant for vitrification. The Double-Shell Tank Integrity Project has been established to evaluate tank aging, and ensure that each tank is structurally sound for continued use. This is the first issue of the Double-Shell Tank Inspection Annual Report. The purpose of this issue is to summarize the results of DST inspections conducted from the beginnng of the inspection program through the end of CY2012. Hereafter, the report will bemore » updated annually with summaries of the past year's DST inspection activities.« less

Site planning and integration fiscal year 1999 multi-year work plan (MYWP) update for WBS 1.8.2.1

DOE Office of Scientific and Technical Information (OSTI.GOV)

SCHULTZ, E.A.

The primary mission of the Site Planning and Integration (SP and I) project is to assist Fluor Daniel Project Direction to ensure that all work performed under the Project Hanford Management Contract (PHMC) is adequately planned, executed, controlled, and that performance is measured and reported in an integrated fashion. Furthermore, SP and I is responsible for the development, implementation, and management of systems and processes that integrate technical, schedule, and cost baselines for PHMC work.

Governance - Alignment and Configuration of Business Activities Task Group Report

DTIC Science & Technology

2006-05-01

governance level and the Enterprise Model as a way of ensuring integration at the management and work/execution levels 3. Ensure shared services (i.e...Management Framework o QDR Organizational Model o Secretary of Defense 2006-2008 Priorities o Shared Services Defense Business Board...support for horizontal and vertical organizations • Move “supporting” organizations to shared services model May 2006 "Team Defense" 18 Task Group

Biolasol: novel perfusion and preservation solution for kidneys.

PubMed

Cierpka, L; Ryszka, F; Dolińska, B; Smorąg, Z; Słomski, R; Wiaderkiewicz, R; Caban, A; Budziński, G; Oczkowicz, G; Wieczorek, J

2014-10-01

Biolasol solution (Pharmaceutical Research and Production Plant "Biochefa," Sosnowiec, Poland) is a novel extracellular perfusion and ex vivo hypothermic kidney preservation solution. It ensures maintenance of homeostasis, reduces tissue edema, has low viscosity, and allows the graft to preserve structural and functional integrity. It minimizes ischemia-reperfusion damage. Perfundates from control and transplanted kidneys flushed with Biolasol or ViaSpan solutions (Arkas, Warszawa, Poland) were analyzed. Parameters of serum and urine collected from 12 pigs after auto-transplantation were also analyzed. Renal medulla was investigated for structural alterations by analyzing hematoxylin and eosin-stained slides. The mean survival time of pigs after the auto-transplantation procedure was the measure for the novel Biolasol solution effectiveness. We observed a statistically significant decrease in marker enzyme levels alanine transaminase, aspartate transaminase, lactic dehydrogenase, and ions (Na and K) in pigs with grafts flushed with Biolasol. Histopathologic examination revealed that the renal cortex structure was not damaged after the use of Biolasol solution. Biolasol solution protects kidneys against ischemia damage and does not differ significantly from the "golden standard" ViaSpan solution.

Electromagnetic characterization of white spruce at different moisture contents using synthetic aperture radar imaging

NASA Astrophysics Data System (ADS)

Ingemi, Christopher M.; Owusu Twumasi, Jones; Yu, Tzuyang

2018-03-01

Detection and quantification of moisture content inside wood (timber) is key to ensuring safety and reliability of timber structures. Moisture inside wood attracts insects and fosters the development of fungi to attack the timber, causing significant damages and reducing the load bearing capacity during their design life. The use of non-destructive evaluation (NDE) techniques (e.g., microwave/radar, ultrasonic, stress wave, and X-ray) for condition assessment of timber structures is a good choice. NDE techniques provide information about the level of deterioration and material properties of timber structures without obstructing their functionality. In this study, microwave/radar NDE technique was selected for the characterization of wood at different moisture contents. A 12 in-by-3.5 in-by-1.5 in. white spruce specimen (picea glauca) was imaged at different moisture contents using a 10 GHz synthetic aperture radar (SAR) sensor inside an anechoic chamber. The presence of moisture was found to increase the SAR image amplitude as expected. Additionally, integrated SAR amplitude was found beneficial in modeling the moisture content inside the wood specimen.

Health monitoring system for a tall building with Fiber Bragg grating sensors

NASA Astrophysics Data System (ADS)

Li, D. S.; Li, H. N.; Ren, L.; Guo, D. S.; Song, G. B.

2009-03-01

Fiber Bragg grating (FBG) sensors demonstrate great potentials for structural health monitoring of civil structures to ensure their structural integrity, durability and reliability. The advantages of applying fiber optic sensors to a tall building include their immunity of electromagnetic interference and multiplexing ability to transfer optical signals over a long distance. In the work, FBG sensors, including strain and temperature sensors, are applied to the construction monitoring of an 18-floor tall building starting from its construction date. The main purposes of the project are: 1) monitoring the temperature evolution history within the concrete during the pouring process; 2) measuring the variations of the main column strains on the underground floor while upper 18 floors were subsequently added on; and 3) monitoring the relative displacements between two foundation blocks. The FBG sensors have been installed and interrogated continuously for more than five months. Monitoring results of temperature and strains during the period are presented in the paper. Furthermore, the lag behavior between the concrete temperature and its surrounding air temperature is investigated.

From Executive Desks to the Arctic Ocean and Back: A Dynamic Framework for Natural Resource Management

NASA Astrophysics Data System (ADS)

Auad, G.

2017-12-01

The translating of observational evidence for decision- and policy-making needs to be placed within the context of specific organizational structures to achieve efficient and effective natural resource management. To reach that stage, these structures would consistently integrate governance, decision-making, and legislative and policy elements that, as a whole, can be harmoniously coupled to the natural system under consideration, while being aligned toward a high level management goal. Examples will be highlighted where communication structures found in nature connect hierarchical and spatial scales and are the core of effective living and physical systems. Based on these concepts, a framework will be described while linkages and tradeoffs will be established among the different components of the socio-ecological system being addressed. The importance for decision- and policy-makers to define a continuous learning dynamics will be highlighted as a way to ensure enhanced (scientific and traditional) knowledge over time and therefore reduced uncertainty at decision moment. The need for an overarching management goal will be addressed while its underpinnings will be described and conceptually linked through different internal and external communication models.

DNA Replication Origins and Fork Progression at Mammalian Telomeres

PubMed Central

Higa, Mitsunori; Fujita, Masatoshi; Yoshida, Kazumasa

2017-01-01

Telomeres are essential chromosomal regions that prevent critical shortening of linear chromosomes and genomic instability in eukaryotic cells. The bulk of telomeric DNA is replicated by semi-conservative DNA replication in the same way as the rest of the genome. However, recent findings revealed that replication of telomeric repeats is a potential cause of chromosomal instability, because DNA replication through telomeres is challenged by the repetitive telomeric sequences and specific structures that hamper the replication fork. In this review, we summarize current understanding of the mechanisms by which telomeres are faithfully and safely replicated in mammalian cells. Various telomere-associated proteins ensure efficient telomere replication at different steps, such as licensing of replication origins, passage of replication forks, proper fork restart after replication stress, and dissolution of post-replicative structures. In particular, shelterin proteins have central roles in the control of telomere replication. Through physical interactions, accessory proteins are recruited to maintain telomere integrity during DNA replication. Dormant replication origins and/or homology-directed repair may rescue inappropriate fork stalling or collapse that can cause defects in telomere structure and functions. PMID:28350373

RTEL1 dismantles T loops and counteracts telomeric G4-DNA to maintain telomere integrity.

PubMed

Vannier, Jean-Baptiste; Pavicic-Kaltenbrunner, Visnja; Petalcorin, Mark I R; Ding, Hao; Boulton, Simon J

2012-05-11

T loops and telomeric G-quadruplex (G4) DNA structures pose a potential threat to genome stability and must be dismantled to permit efficient telomere replication. Here we implicate the helicase RTEL1 in the removal of telomeric DNA secondary structures, which is essential for preventing telomere fragility and loss. In the absence of RTEL1, T loops are inappropriately resolved by the SLX4 nuclease complex, resulting in loss of the telomere as a circle. Depleting SLX4 or blocking DNA replication abolished telomere circles (TCs) and rescued telomere loss in RTEL1(-/-) cells but failed to suppress telomere fragility. Conversely, stabilization of telomeric G4-DNA or loss of BLM dramatically enhanced telomere fragility in RTEL1-deficient cells but had no impact on TC formation or telomere loss. We propose that RTEL1 performs two distinct functions at telomeres: it disassembles T loops and also counteracts telomeric G4-DNA structures, which together ensure the dynamics and stability of the telomere. Copyright © 2012 Elsevier Inc. All rights reserved.

An Integrated Approach to Teaching Literature in an EFL Classroom

ERIC Educational Resources Information Center

Yimwilai, Supaporn

2015-01-01

This research studied the effectiveness of the integrated approach in English as a Foreign Language (EFL) classrooms and how it related to students' 1) achievements, 2) critical thinking skills, and 3) attitudes toward reading literature. To ensure that the results were accurate and reliable, the experiment was conducted in two different regions.…

[Application of supply chain integration management of medical consumables].

PubMed

Zhang, Jian

2013-07-01

This paper introduces the background, the content, the information management system of material supply chain integration management and the consumables management process. The system helps to expand the selection of hospital supplies varieties, to reduce consumables management costs, to improve the efficiency of supplies, to ensure supplies safety, reliability and traceability.

49 CFR 192.1001 - What definitions apply to this subpart?

Code of Federal Regulations, 2011 CFR

2011-10-01

... Integrity Management (IM) § 192.1001 What definitions apply to this subpart? The following definitions apply to this subpart: Excavation Damage means any impact that results in the need to repair or replace an... mechanisms or procedures the operator will use to implement its integrity management program and to ensure...

77 FR 47411 - Privacy Act of 1974; Department of Homeland Security/U.S. Citizenship and Immigration Services...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-08

... strengthening the integrity of the nation's legal immigration system by ensuring that immigration benefits are... the United States. In addition, USCIS enhances the integrity of the nation's legal immigration system... legal immigration system by: (1) Identifying threats to national security and public safety posed by...

Beyond the Web Tutorial: Development and Implementation of an Online, Self-Directed Academic Integrity Course at Oakland University

ERIC Educational Resources Information Center

Greer, Katie; Swanberg, Stephanie; Hristova, Mariela; Switzer, Anne T.; Daniel, Dominique; Perdue, Sherry Wynn

2012-01-01

Intentional and unintentional plagiarism cases occur frequently and present unique pedagogical challenges for librarians, who often are deemed responsible for ensuring that undergraduates gain a solid understanding of academic integrity issues via information literacy instruction. This article describes the process by which faculty from the…

Energy Systems Integration News | Energy Systems Integration Facility |

Science.gov Websites

distribution feeder models for use in hardware-in-the-loop (HIL) experiments. Using this method, a full feeder ; proposes an additional control loop to improve frequency support while ensuring stable operation. The and Frequency Deviation," also proposes an additional control loop, this time to smooth the wind

75 FR 40751 - Castor Oil, Ethoxylated, Oleate; Tolerance Exemption

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-14

... a finite tolerance is not necessary to ensure that there is a reasonable certainty that no harm will... contain as an integral part of its composition the atomic elements carbon, hydrogen, and oxygen. 3. The polymer does not contain as an integral part of its composition, except as impurities, any element other...

Creating a Network Model for the Integration of a Dynamic and Static Supervisory Control and Data Acquisition (SCADA) Test Environment

DTIC Science & Technology

2011-03-01

they can continue to leverage these capabilities (building Smart Grid infrastructure and providing Internet connectivity to every home ) while ensuring...21  Figure 9. Smart Grid Interoperability .............................................................................. 22  Figure 10. Smart ...Grid Integration .................................................................................... 24  Figure 11. National Smart Grid Initiatives

The Role of Mobile Technologies in Pre-Service Foreign Language Teacher Education

ERIC Educational Resources Information Center

Tolosa, Constanza

2017-01-01

Pre-service teacher education plays a pivotal role in ensuring that future teachers are prepared to integrate technology effectively to their teaching. One way of improving readiness in future teachers is integrating mobile technologies to discipline-specific teacher education courses. This article presents three case studies drawn from…

77 FR 2280 - Request for Information To Gather Technical Expertise Pertaining to Testing Integrity

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-17

... may help SEAs and LEAs ensure the integrity of the data used to measure student achievement and to... this RFI, a testing irregularity includes any occurrence that may inappropriately influence a student's..., reliable, and timely information on student academic performance to improve instruction and help all...

Developing Second Graders' Creativity through Literacy-Science Integrated Lessons on Lifecycles

ERIC Educational Resources Information Center

Webb, Angela Naomi; Rule, Audrey C.

2012-01-01

Young children need to develop creative problem-solving skills to ensure success in an uncertain future workplace. Although most teachers recognize the importance of creativity, they do not always know how integrate it with content learning. This repeated measures study on animal and plant lifecycles examined student learning of vocabulary and…

Popular Media in the Biology Classroom: Viewing Popular Science Skeptically

ERIC Educational Resources Information Center

Gardner, Grant E.; Jones, M. Gail; Ferzli, Miriam

2009-01-01

It can be argued that the responsibilities of biology educators to their students extend far beyond the delivery of science content. Educators are also charged with ensuring that students do not temporarily memorize the information, but actively integrate it into their daily lives. Personal integration of science content should prepare students to…

PACS administrators' and radiologists' perspective on the importance of features for PACS selection.

PubMed

Joshi, Vivek; Narra, Vamsi R; Joshi, Kailash; Lee, Kyootai; Melson, David

2014-08-01

Picture archiving and communication systems (PACS) play a critical role in radiology. This paper presents the criteria important to PACS administrators for selecting a PACS. A set of criteria are identified and organized into an integrative hierarchical framework. Survey responses from 48 administrators are used to identify the relative weights of these criteria through an analytical hierarchy process. The five main dimensions for PACS selection in order of importance are system continuity and functionality, system performance and architecture, user interface for workflow management, user interface for image manipulation, and display quality. Among the subdimensions, the highest weights were assessed for security, backup, and continuity; tools for continuous performance monitoring; support for multispecialty images; and voice recognition/transcription. PACS administrators' preferences were generally in line with that of previously reported results for radiologists. Both groups assigned the highest priority to ensuring business continuity and preventing loss of data through features such as security, backup, downtime prevention, and tools for continuous PACS performance monitoring. PACS administrators' next high priorities were support for multispecialty images, image retrieval speeds from short-term and long-term storage, real-time monitoring, and architectural issues of compatibility and integration with other products. Thus, next to ensuring business continuity, administrators' focus was on issues that impact their ability to deliver services and support. On the other hand, radiologists gave high priorities to voice recognition, transcription, and reporting; structured reporting; and convenience and responsiveness in manipulation of images. Thus, radiologists' focus appears to be on issues that may impact their productivity, effort, and accuracy.

Application of high speed machining technology in aviation

NASA Astrophysics Data System (ADS)

Bałon, Paweł; Szostak, Janusz; Kiełbasa, Bartłomiej; Rejman, Edward; Smusz, Robert

2018-05-01

Aircraft structures are exposed to many loads during their working lifespan. Every particular action made during a flight is composed of a series of air movements which generate various aircraft loads. The most rigorous requirement which modern aircraft structures must fulfill is to maintain their high durability and reliability. This requirement involves taking many restrictions into account during the aircraft design process. The most important factor is the structure's overall mass, which has a crucial impact on both utility properties and cost-effectiveness. This makes aircraft one of the most complex results of modern technology. Additionally, there is currently an increasing utilization of high strength aluminum alloys, which requires the implementation of new manufacturing processes. High Speed Machining technology (HSM) is currently one of the most important machining technologies used in the aviation industry, especially in the machining of aluminium alloys. The primary difference between HSM and other milling techniques is the ability to select cutting parameters - depth of the cut layer, feed rate, and cutting speed in order to simultaneously ensure high quality, precision of the machined surface, and high machining efficiency, all of which shorten the manufacturing process of the integral components. In this paper, the authors explain the implementation of the HSM method in integral aircraft constructions. It presents the method of the airframe manufacturing method, and the final results. The HSM method is compared to the previous method where all subcomponents were manufactured by bending and forming processes, and then, they were joined by riveting.

Gauge properties of the guiding center variational symplectic integrator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Squire, J.; Tang, W. M.; Qin, H.

Variational symplectic algorithms have recently been developed for carrying out long-time simulation of charged particles in magnetic fields [H. Qin and X. Guan, Phys. Rev. Lett. 100, 035006 (2008); H. Qin, X. Guan, and W. Tang, Phys. Plasmas (2009); J. Li, H. Qin, Z. Pu, L. Xie, and S. Fu, Phys. Plasmas 18, 052902 (2011)]. As a direct consequence of their derivation from a discrete variational principle, these algorithms have very good long-time energy conservation, as well as exactly preserving discrete momenta. We present stability results for these algorithms, focusing on understanding how explicit variational integrators can be designed formore » this type of system. It is found that for explicit algorithms, an instability arises because the discrete symplectic structure does not become the continuous structure in the t{yields}0 limit. We examine how a generalized gauge transformation can be used to put the Lagrangian in the 'antisymmetric discretization gauge,' in which the discrete symplectic structure has the correct form, thus eliminating the numerical instability. Finally, it is noted that the variational guiding center algorithms are not electromagnetically gauge invariant. By designing a model discrete Lagrangian, we show that the algorithms are approximately gauge invariant as long as A and {phi} are relatively smooth. A gauge invariant discrete Lagrangian is very important in a variational particle-in-cell algorithm where it ensures current continuity and preservation of Gauss's law [J. Squire, H. Qin, and W. Tang (to be published)].« less

48 CFR 211.274-1 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

... on the workforce through increased productivity and efficiency; and (e) Ensures item level traceability throughout lifecycle to strengthen supply chain integrity, enhance cyber security, and combat...

A refined regional modeling approach for the Corn Belt - Experiences and recommendations for large-scale integrated modeling

NASA Astrophysics Data System (ADS)

Panagopoulos, Yiannis; Gassman, Philip W.; Jha, Manoj K.; Kling, Catherine L.; Campbell, Todd; Srinivasan, Raghavan; White, Michael; Arnold, Jeffrey G.

2015-05-01

Nonpoint source pollution from agriculture is the main source of nitrogen and phosphorus in the stream systems of the Corn Belt region in the Midwestern US. This region is comprised of two large river basins, the intensely row-cropped Upper Mississippi River Basin (UMRB) and Ohio-Tennessee River Basin (OTRB), which are considered the key contributing areas for the Northern Gulf of Mexico hypoxic zone according to the US Environmental Protection Agency. Thus, in this area it is of utmost importance to ensure that intensive agriculture for food, feed and biofuel production can coexist with a healthy water environment. To address these objectives within a river basin management context, an integrated modeling system has been constructed with the hydrologic Soil and Water Assessment Tool (SWAT) model, capable of estimating river basin responses to alternative cropping and/or management strategies. To improve modeling performance compared to previous studies and provide a spatially detailed basis for scenario development, this SWAT Corn Belt application incorporates a greatly refined subwatershed structure based on 12-digit hydrologic units or 'subwatersheds' as defined by the US Geological Service. The model setup, calibration and validation are time-demanding and challenging tasks for these large systems, given the scale intensive data requirements, and the need to ensure the reliability of flow and pollutant load predictions at multiple locations. Thus, the objectives of this study are both to comprehensively describe this large-scale modeling approach, providing estimates of pollution and crop production in the region as well as to present strengths and weaknesses of integrated modeling at such a large scale along with how it can be improved on the basis of the current modeling structure and results. The predictions were based on a semi-automatic hydrologic calibration approach for large-scale and spatially detailed modeling studies, with the use of the Sequential Uncertainty Fitting algorithm (SUFI-2) and the SWAT-CUP interface, followed by a manual water quality calibration on a monthly basis. The refined modeling approach developed in this study led to successful predictions across most parts of the Corn Belt region and can be used for testing pollution mitigation measures and agricultural economic scenarios, providing useful information to policy makers and recommendations on similar efforts at the regional scale.

Auditing of chromatographic data.

PubMed

Mabie, J T

1998-01-01

During a data audit, it is important to ensure that there is clear documentation and an audit trail. The Quality Assurance Unit should review all areas, including the laboratory, during the conduct of the sample analyses. The analytical methodology that is developed should be documented prior to sample analyses. This is an important document for the auditor, as it is the instrumental piece used by the laboratory personnel to maintain integrity throughout the process. It is expected that this document will give insight into the sample analysis, run controls, run sequencing, instrument parameters, and acceptance criteria for the samples. The sample analysis and all supporting documentation should be audited in conjunction with this written analytical method and any supporting Standard Operating Procedures to ensure the quality and integrity of the data.

Indistinguishability and identifiability of kinetic models for the MurC reaction in peptidoglycan biosynthesis.

PubMed

Hattersley, J G; Pérez-Velázquez, J; Chappell, M J; Bearup, D; Roper, D; Dowson, C; Bugg, T; Evans, N D

2011-11-01

An important question in Systems Biology is the design of experiments that enable discrimination between two (or more) competing chemical pathway models or biological mechanisms. In this paper analysis is performed between two different models describing the kinetic mechanism of a three-substrate three-product reaction, namely the MurC reaction in the cytoplasmic phase of peptidoglycan biosynthesis. One model involves ordered substrate binding and ordered release of the three products; the competing model also assumes ordered substrate binding, but with fast release of the three products. The two versions are shown to be distinguishable; however, if standard quasi-steady-state assumptions are made distinguishability cannot be determined. Once model structure uniqueness is ensured the experimenter must determine if it is possible to successfully recover rate constant values given the experiment observations, a process known as structural identifiability. Structural identifiability analysis is carried out for both models to determine which of the unknown reaction parameters can be determined uniquely, or otherwise, from the ideal system outputs. This structural analysis forms an integrated step towards the modelling of the full pathway of the cytoplasmic phase of peptidoglycan biosynthesis. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Stirling Convertor Fasteners Reliability Quantification

NASA Technical Reports Server (NTRS)

Shah, Ashwin R.; Korovaichuk, Igor; Kovacevich, Tiodor; Schreiber, Jeffrey G.

2006-01-01

Onboard Radioisotope Power Systems (RPS) being developed for NASA s deep-space science and exploration missions require reliable operation for up to 14 years and beyond. Stirling power conversion is a candidate for use in an RPS because it offers a multifold increase in the conversion efficiency of heat to electric power and reduced inventory of radioactive material. Structural fasteners are responsible to maintain structural integrity of the Stirling power convertor, which is critical to ensure reliable performance during the entire mission. Design of fasteners involve variables related to the fabrication, manufacturing, behavior of fasteners and joining parts material, structural geometry of the joining components, size and spacing of fasteners, mission loads, boundary conditions, etc. These variables have inherent uncertainties, which need to be accounted for in the reliability assessment. This paper describes these uncertainties along with a methodology to quantify the reliability, and provides results of the analysis in terms of quantified reliability and sensitivity of Stirling power conversion reliability to the design variables. Quantification of the reliability includes both structural and functional aspects of the joining components. Based on the results, the paper also describes guidelines to improve the reliability and verification testing.

A New Hybrid BFOA-PSO Optimization Technique for Decoupling and Robust Control of Two-Coupled Distillation Column Process.

PubMed

Abdelkarim, Noha; Mohamed, Amr E; El-Garhy, Ahmed M; Dorrah, Hassen T

2016-01-01

The two-coupled distillation column process is a physically complicated system in many aspects. Specifically, the nested interrelationship between system inputs and outputs constitutes one of the significant challenges in system control design. Mostly, such a process is to be decoupled into several input/output pairings (loops), so that a single controller can be assigned for each loop. In the frame of this research, the Brain Emotional Learning Based Intelligent Controller (BELBIC) forms the control structure for each decoupled loop. The paper's main objective is to develop a parameterization technique for decoupling and control schemes, which ensures robust control behavior. In this regard, the novel optimization technique Bacterial Swarm Optimization (BSO) is utilized for the minimization of summation of the integral time-weighted squared errors (ITSEs) for all control loops. This optimization technique constitutes a hybrid between two techniques, which are the Particle Swarm and Bacterial Foraging algorithms. According to the simulation results, this hybridized technique ensures low mathematical burdens and high decoupling and control accuracy. Moreover, the behavior analysis of the proposed BELBIC shows a remarkable improvement in the time domain behavior and robustness over the conventional PID controller.

SERVAL: a new framework for the evaluation of animal health surveillance.

PubMed

Drewe, J A; Hoinville, L J; Cook, A J C; Floyd, T; Gunn, G; Stärk, K D C

2015-02-01

Animal health surveillance programmes may change in response to altering requirements or perceived weaknesses but are seldom subjected to any formal evaluation to ensure that they provide valuable information in an efficient manner. The literature on the evaluation of animal health surveillance systems is sparse, and those that are published may be unstructured and therefore incomplete. To address this gap, we have developed SERVAL, a SuRveillance EVALuation framework, which is novel and aims to be generic and therefore suitable for the evaluation of any animal health surveillance system. The inclusion of socio-economic criteria ensures that economic evaluation is an integral part of this framework. SERVAL was developed with input from a technical workshop of international experts followed by a consultation process involving providers and users of surveillance and evaluation data. It has been applied to a range of case studies encompassing different surveillance and evaluation objectives. Here, we describe the development, structure and application of the SERVAL framework. We discuss users' experiences in applying SERVAL to evaluate animal health surveillance systems in Great Britain. © 2013 Crown Copyright. This article is published with the permission of the Controller of HMSO and the Queen's Printer for Scotland.

Achieving excellence in veterans healthcare--a balanced scorecard approach.

PubMed

Biro, Lawrence A; Moreland, Michael E; Cowgill, David E

2003-01-01

This article provides healthcare administrators and managers with a framework and model for developing a balanced scorecard and demonstrates the remarkable success of this process, which brings focus to leadership decisions about the allocation of resources. This scorecard was developed as a top management tool designed to structure multiple priorities of a large, complex, integrated healthcare system and to establish benchmarks to measure success in achieving targets for performance in identified areas. Significant benefits and positive results were derived from the implementation of the balanced scorecard, based upon benchmarks considered to be critical success factors. The network's chief executive officer and top leadership team set and articulated the network's primary operating principles: quality and efficiency in the provision of comprehensive healthcare and support services. Under the weighted benchmarks of the balanced scorecard, the facilities in the network were mandated to adhere to one non-negotiable tenet: providing care that is second to none. The balanced scorecard approach to leadership continuously ensures that this is the primary goal and focal point for all activity within the network. To that end, systems are always in place to ensure that the network is fully successful on all performance measures relating to quality.

A New Hybrid BFOA-PSO Optimization Technique for Decoupling and Robust Control of Two-Coupled Distillation Column Process

PubMed Central

Mohamed, Amr E.; Dorrah, Hassen T.

2016-01-01

The two-coupled distillation column process is a physically complicated system in many aspects. Specifically, the nested interrelationship between system inputs and outputs constitutes one of the significant challenges in system control design. Mostly, such a process is to be decoupled into several input/output pairings (loops), so that a single controller can be assigned for each loop. In the frame of this research, the Brain Emotional Learning Based Intelligent Controller (BELBIC) forms the control structure for each decoupled loop. The paper's main objective is to develop a parameterization technique for decoupling and control schemes, which ensures robust control behavior. In this regard, the novel optimization technique Bacterial Swarm Optimization (BSO) is utilized for the minimization of summation of the integral time-weighted squared errors (ITSEs) for all control loops. This optimization technique constitutes a hybrid between two techniques, which are the Particle Swarm and Bacterial Foraging algorithms. According to the simulation results, this hybridized technique ensures low mathematical burdens and high decoupling and control accuracy. Moreover, the behavior analysis of the proposed BELBIC shows a remarkable improvement in the time domain behavior and robustness over the conventional PID controller. PMID:27807444

241-AY Double Shell Tanks (DST) Integrity Assessment Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

JENSEN, C.E.

1999-09-21

This report presents the results of the integrity assessment of the 241-AY double-shell tank farm facility located in the 200 East Area of the Hanford Site. The assessment included the design evaluation and integrity examinations of the tanks and concluded that the facility is adequately designed, is compatible with the waste, and is fit for use. Recommendations including subsequent examinations. are made to ensure the continued safe operation of the tanks.

Can We Better Integrate the Role of Anti-Doping in Sports and Society? A Psychological Approach to Contemporary Value-Based Prevention.

PubMed

Petróczi, Andrea; Norman, Paul; Brueckner, Sebastian

2017-01-01

In sport, a wide array of substances with established or putative performance-enhancing properties is used. Most substances are fully acceptable, whilst a defined set, revised annually, is prohibited; thus, using any of these prohibited substances is declared as cheating. In the increasingly tolerant culture of pharmacological and technical human enhancements, the traditional normative approach to anti-doping, which involves telling athletes what they cannot do to improve their athletic ability and performance, diverges from the otherwise positive values attached to human improvement and enhancement in society. Today, doping is the epitome of conflicting normative expectations about the goal (performance enhancement) and the means by which the goal is achieved (use of drugs). Owing to this moral-functional duality, addressing motivations for doping avoidance at the community level is necessary, but not sufficient, for effective doping prevention. Relevant and meaningful anti-doping must also recognise and respect the values of those affected, and consolidate them with the values underpinning structural, community level anti-doping. Effective anti-doping efforts are pragmatic, positive, preventive, and proactive. They acknowledge the progressive nature of how a "performance mindset" forms in parallel with the career transition to elite level, encompasses all levels and abilities, and directly addresses the reasons behind doping use with tangible solutions. For genuine integration into sport and society, anti-doping should consistently engage athletes and other stakeholders in developing positive preventive strategies to ensure that anti-doping education not only focuses on the intrinsic values associated with the spirit of sport but also recognises the values attached to performance enhancement, addresses the pressures athletes are under, and meets their needs for practical solutions to avoid doping. Organisations involved in anti- doping should avoid the image of "controlling" but, instead, work in partnerships with all stakeholders to involve and ensure integration of the targeted individuals in global community-based preventive interventions. © 2017 S. Karger AG, Basel.

Conclusion

NASA Technical Reports Server (NTRS)

Arnold, Steven M.; Wong, Terry T.

2011-01-01

This compilation of papers in this book represents approximately half of the works discussed at the MS&T 2010 symposium entitled Tools, Models, Databases, and Simulation Tools Developed and Needed to Realize the Vision of Integrated Computational Materials Engineering at Materials Science & Technology wherein five sessions comprised of 33 presentations was organized. The goal of the symposium was two fold To provide a forum in which current state-of-the-art methods for ICME (e.g., information informatics, experimentation, and modeling) could be openly discussed and critiqued by not only materials scientist but also structural engineers/researchers, component designers, industrial leaders and government program managers. To leave the symposium and in particular the panel discussion with a clear idea of the gaps and barriers (both technical, cultural and economical) that must be addressed in order for ICME to fully succeed. The organizers felt that these goals were met, as particularly evident by the standing room only attendance during a lively panel discussion session at the end of the Symposium. However it is the firm belief of the editors of this book that this symposium was merely a start in the right direction, and that subsequent conferences/symposium (e.g., First World Congress on Integrated Computational Materials Engineering to be held July 10-14, 2011 at Seven Springs Mountain Resort in Pennsylvania) must work hard to ensure that a truly diverse, multidisciplinary, community of researchers and practitioners are present and have ample opportunity for interaction. This will ensure that a proper balance between push and pull disciplines and technologies is maintained so that this emerging focus area, Integrated Computational Materials Engineering (ICME), has the greatest potential for success and impact on "system-level" payoffs. Similarly, a pro-active approach is required to reform historical modes of operation in industry, government and the academic sectors so as to facilitate multidisciplinary collaboration and to clearly articulate the vision and scope of ICME.

Clinical and Community Delivery Systems for Preventive Care

PubMed Central

Krist, Alex H.; Shenson, Douglas; Woolf, Steven H.; Bradley, Cathy; Liaw, Winston R.; Rothemich, Stephen F.; Slonim, Amy; Benson, William; Anderson, Lynda A.

2015-01-01

Although clinical preventive services (CPS)—screening tests, immunizations, health behavior counseling, and preventive medications—can save lives, Americans receive only half of recommended services. This "prevention gap," if closed, could substantially reduce morbidity and mortality. Opportunities to improve delivery of CPS exist in both clinical and community settings, but these activities are rarely coordinated across these settings, resulting in inefficiencies and attenuated benefits. Through a literature review, semi-structured interviews with 50 national experts, field observations of 53 successful programs, and a national stakeholder meeting, a framework to fully integrate CPS delivery across clinical and community care delivery systems was developed. The framework identifies the necessary participants, their role in care delivery, and the infrastructure, support, and policies necessary to ensure success. Essential stakeholders in integration include clinicians; community members and organizations; spanning personnel and infrastructure; national, state, and local leadership; and funders and purchasers. Spanning personnel and infrastructure are essential to bring clinicians and communities together and to help patients navigate across care settings. The specifics of clinical–community integrations vary depending on the services addressed and the local context. Although broad establishment of effective clinical–community integrations will require substantial changes, existing clinical and community models provide an important starting point. The key policies and elements of the framework are often already in place or easily identified. The larger challenge is for stakeholders to recognize how integration serves their mutual interests and how it can be financed and sustained over time. PMID:24050428

Dovetailing biology and chemistry: integrating the Gene Ontology with the ChEBI chemical ontology

PubMed Central

2013-01-01

Background The Gene Ontology (GO) facilitates the description of the action of gene products in a biological context. Many GO terms refer to chemical entities that participate in biological processes. To facilitate accurate and consistent systems-wide biological representation, it is necessary to integrate the chemical view of these entities with the biological view of GO functions and processes. We describe a collaborative effort between the GO and the Chemical Entities of Biological Interest (ChEBI) ontology developers to ensure that the representation of chemicals in the GO is both internally consistent and in alignment with the chemical expertise captured in ChEBI. Results We have examined and integrated the ChEBI structural hierarchy into the GO resource through computationally-assisted manual curation of both GO and ChEBI. Our work has resulted in the creation of computable definitions of GO terms that contain fully defined semantic relationships to corresponding chemical terms in ChEBI. Conclusions The set of logical definitions using both the GO and ChEBI has already been used to automate aspects of GO development and has the potential to allow the integration of data across the domains of biology and chemistry. These logical definitions are available as an extended version of the ontology from http://purl.obolibrary.org/obo/go/extensions/go-plus.owl. PMID:23895341

How to fold a spin chain: Integrable boundaries of the Heisenberg XXX and Inozemtsev hyperbolic models

NASA Astrophysics Data System (ADS)

De La Rosa Gomez, Alejandro; MacKay, Niall; Regelskis, Vidas

2017-04-01

We present a general method of folding an integrable spin chain, defined on a line, to obtain an integrable open spin chain, defined on a half-line. We illustrate our method through two fundamental models with sl2 Lie algebra symmetry: the Heisenberg XXX and the Inozemtsev hyperbolic spin chains. We obtain new long-range boundary Hamiltonians and demonstrate that they exhibit Yangian symmetries, thus ensuring integrability of the models we obtain. The method presented provides a ;bottom-up; approach for constructing integrable boundaries and can be applied to any spin chain model.

Modeling and control of flexible structures

NASA Technical Reports Server (NTRS)

Gibson, J. S.; Mingori, D. L.

1988-01-01

This monograph presents integrated modeling and controller design methods for flexible structures. The controllers, or compensators, developed are optimal in the linear-quadratic-Gaussian sense. The performance objectives, sensor and actuator locations and external disturbances influence both the construction of the model and the design of the finite dimensional compensator. The modeling and controller design procedures are carried out in parallel to ensure compatibility of these two aspects of the design problem. Model reduction techniques are introduced to keep both the model order and the controller order as small as possible. A linear distributed, or infinite dimensional, model is the theoretical basis for most of the text, but finite dimensional models arising from both lumped-mass and finite element approximations also play an important role. A central purpose of the approach here is to approximate an optimal infinite dimensional controller with an implementable finite dimensional compensator. Both convergence theory and numerical approximation methods are given. Simple examples are used to illustrate the theory.

A review of rapid prototyping techniques for tissue engineering purposes.

PubMed

Peltola, Sanna M; Melchels, Ferry P W; Grijpma, Dirk W; Kellomäki, Minna

2008-01-01

Rapid prototyping (RP) is a common name for several techniques, which read in data from computer-aided design (CAD) drawings and manufacture automatically three-dimensional objects layer-by-layer according to the virtual design. The utilization of RP in tissue engineering enables the production of three-dimensional scaffolds with complex geometries and very fine structures. Adding micro- and nanometer details into the scaffolds improves the mechanical properties of the scaffold and ensures better cell adhesion to the scaffold surface. Thus, tissue engineering constructs can be customized according to the data acquired from the medical scans to match the each patient's individual needs. In addition RP enables the control of the scaffold porosity making it possible to fabricate applications with desired structural integrity. Unfortunately, every RP process has its own unique disadvantages in building tissue engineering scaffolds. Hence, the future research should be focused on the development of RP machines designed specifically for fabrication of tissue engineering scaffolds, although RP methods already can serve as a link between tissue and engineering.

Micro-masonry for 3D additive micromanufacturing.

PubMed

Keum, Hohyun; Kim, Seok

2014-08-01

Transfer printing is a method to transfer solid micro/nanoscale materials (herein called 'inks') from a substrate where they are generated to a different substrate by utilizing elastomeric stamps. Transfer printing enables the integration of heterogeneous materials to fabricate unexampled structures or functional systems that are found in recent advanced devices such as flexible and stretchable solar cells and LED arrays. While transfer printing exhibits unique features in material assembly capability, the use of adhesive layers or the surface modification such as deposition of self-assembled monolayer (SAM) on substrates for enhancing printing processes hinders its wide adaptation in microassembly of microelectromechanical system (MEMS) structures and devices. To overcome this shortcoming, we developed an advanced mode of transfer printing which deterministically assembles individual microscale objects solely through controlling surface contact area without any surface alteration. The absence of an adhesive layer or other modification and the subsequent material bonding processes ensure not only mechanical bonding, but also thermal and electrical connection between assembled materials, which further opens various applications in adaptation in building unusual MEMS devices.

Three-dimensionally Ordered Macroporous Structure Enabled Nanothermite Membrane of Mn2O3/Al

PubMed Central

Zheng, Guoqiang; Zhang, Wenchao; Shen, Ruiqi; Ye, Jiahai; Qin, Zhichun; Chao, Yimin

2016-01-01

Mn2O3 has been selected to realize nanothermite membrane for the first time in the literature. Mn2O3/Al nanothermite has been synthesized by magnetron sputtering a layer of Al film onto three-dimensionally ordered macroporous (3DOM) Mn2O3 skeleton. The energy release is significantly enhanced owing to the unusual 3DOM structure, which ensures Al and Mn2O3 to integrate compactly in nanoscale and greatly increase effective contact area. The morphology and DSC curve of the nanothermite membrane have been investigated at various aluminizing times. At the optimized aluminizing time of 30 min, energy release reaches a maximum of 2.09 kJ∙g−1, where the Al layer thickness plays a decisive role in the total energy release. This method possesses advantages of high compatibility with MEMS and can be applied to other nanothermite systems easily, which will make great contribution to little-known nanothermite research. PMID:26935405

Attitudes towards ICT Integration into Curriculum and Usage among University Lecturers in Vietnam

ERIC Educational Resources Information Center

Hue, Ly Thanh; Ab Jalil, Habibah

2013-01-01

Although the integration of information and communication technologies (ICT) into the curriculum was a crucial process in ensuring the quality of education, it has still not been given greater concern by the administrators and lecturers in some universities in Vietnam. The purpose of this descriptive-survey research is to determine lecturers'…

Combining Identity and Integration: Comparative Analysis of Schools for Two Minority Groups in Ukraine

ERIC Educational Resources Information Center

Kulyk, Volodymyr

2013-01-01

This article analyses school systems for two of Ukraine's minorities, the Hungarians and the Crimean Tatars with the aim of assessing their success in promoting ethnocultural identity and social integration of the minority youth. I demonstrate that the exclusive instruction in Hungarian ensures the reproduction of group language knowledge and…

49 CFR 192.913 - When may an operator deviate its program from certain requirements of this subpart?

Code of Federal Regulations, 2014 CFR

2014-10-01

... comprehensive data integration process; (iv) A procedure for applying lessons learned from assessment of covered... performance matrix that demonstrates the program has been effective in ensuring the integrity of the covered... requirements in § 192.933, and incorporate the results and lessons learned from the more recent assessment into...

49 CFR 192.913 - When may an operator deviate its program from certain requirements of this subpart?

Code of Federal Regulations, 2013 CFR

2013-10-01

... comprehensive data integration process; (iv) A procedure for applying lessons learned from assessment of covered... performance matrix that demonstrates the program has been effective in ensuring the integrity of the covered... requirements in § 192.933, and incorporate the results and lessons learned from the more recent assessment into...

49 CFR 192.913 - When may an operator deviate its program from certain requirements of this subpart?

Code of Federal Regulations, 2012 CFR

2012-10-01

... comprehensive data integration process; (iv) A procedure for applying lessons learned from assessment of covered... performance matrix that demonstrates the program has been effective in ensuring the integrity of the covered... requirements in § 192.933, and incorporate the results and lessons learned from the more recent assessment into...

78 FR 4792 - Epoxy Polymer; Exemption From the Requirement of a Tolerance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-23

... a finite tolerance is not necessary to ensure that there is a reasonable certainty that no harm will... contain as an integral part of its composition the atomic elements carbon, hydrogen, and oxygen. 3. The polymer does not contain as an integral part of its composition, except as impurities, any element other...

The Divide between Diversity Training and Diversity Education: Integrating Best Practices

ERIC Educational Resources Information Center

King, Eden B.; Gulick, Lisa M. V.; Avery, Derek R.

2010-01-01

The fields of diversity training and diversity education have developed in a disconnected manner. This divide ensures that each field advances slowly and with narrow focus. The authors argue here that the divide should be bridged with attention to the best practices that diversity training and diversity education offer. By integrating the best…

Assessing Treatment Integrity in Acceptance and Commitment Therapy: Strategies and Suggestions

ERIC Educational Resources Information Center

Plumb, Jennifer C.; Vilardaga, Roger

2010-01-01

In this paper, we briefly review the current literature on treatment integrity and discuss the relevance of this procedure for detecting, measuring and ensuring that the proposed mechanisms of change in cognitive behavior therapy, in this case of acceptance and commitment therapy (ACT; S.C. Hayes, Strosahl, & Wilson, 1999), take place. We discuss…

REFMAC5 for the refinement of macromolecular crystal structures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murshudov, Garib N., E-mail: garib@ysbl.york.ac.uk; Skubák, Pavol; Lebedev, Andrey A.

The general principles behind the macromolecular crystal structure refinement program REFMAC5 are described. This paper describes various components of the macromolecular crystallographic refinement program REFMAC5, which is distributed as part of the CCP4 suite. REFMAC5 utilizes different likelihood functions depending on the diffraction data employed (amplitudes or intensities), the presence of twinning and the availability of SAD/SIRAS experimental diffraction data. To ensure chemical and structural integrity of the refined model, REFMAC5 offers several classes of restraints and choices of model parameterization. Reliable models at resolutions at least as low as 4 Å can be achieved thanks to low-resolution refinement toolsmore » such as secondary-structure restraints, restraints to known homologous structures, automatic global and local NCS restraints, ‘jelly-body’ restraints and the use of novel long-range restraints on atomic displacement parameters (ADPs) based on the Kullback–Leibler divergence. REFMAC5 additionally offers TLS parameterization and, when high-resolution data are available, fast refinement of anisotropic ADPs. Refinement in the presence of twinning is performed in a fully automated fashion. REFMAC5 is a flexible and highly optimized refinement package that is ideally suited for refinement across the entire resolution spectrum encountered in macromolecular crystallography.« less

Integrated signal probe based aptasensor for dual-analyte detection.

PubMed

Xiang, Juan; Pi, Xiaomei; Chen, Xiaoqing; Xiang, Lei; Yang, Minghui; Ren, Hao; Shen, Xiaojuan; Qi, Ning; Deng, Chunyan

2017-10-15

For the multi-analyte detection, although the sensitivity has commonly met the practical requirements, the reliability, reproducibility and stability need to be further improved. In this work, two different aptamer probes labeled with redox tags were used as signal probe1 (sP1) and signal probe2 (sP2), which were integrated into one unity DNA architecture to develop the integrated signal probe (ISP). Comparing with the conventional independent signal probes for the simultaneous multi-analyte detection, the proposed ISP was more reproducible and accurate. This can be due to that ISP in one DNA structure can ensure the completely same modification condition and an equal stoichiometric ratio between sP1 and sP2, and furthermore the cross interference between sP1 and sP2 can be successfully prevented by regulating the complementary position of sP1 and sP2. The ISP-based assay system would be a great progress for the dual-analyte detection. Combining with gold nanoparticles (AuNPs) signal amplification, the ISP/AuNPs-based aptasensor for the sensitive dual-analyte detection was explored. Based on DNA structural switching induced by targets binding to aptamer, the simultaneous dual-analyte detection was simply achieved by monitoring the electrochemical responses of methylene blue (MB) and ferrocene (Fc) This proposed detection system possesses such advantages as simplicity in design, easy operation, good reproducibility and accuracy, high sensitivity and selectivity, which indicates the excellent application of this aptasensor in the field of clinical diagnosis or other molecular sensors. Copyright © 2017 Elsevier B.V. All rights reserved.

Progress in Hanford's Double-Shell Tank Integrity Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bryson, D.C.; Washenfelder, D.J.; Boomer, K.D.

2008-07-01

The U.S. Department of Energy's Office of River Protection has an extensive integrity assessment program for the Hanford Site Double-Shell Tank System. The DOE Orders and environmental protection regulations provide the guidelines for the activities used to inspect and maintain 28 double-shell tanks (DSTs), the waste evaporator, and ancillary equipment that compose this system. This program has been reviewed by oversight and regulatory bodies and found to comply with the established guidelines. The basis for the DOE Order 435.1-1 for tank integrity comes from the Tank Structural Integrity Panel led by Brookhaven National Laboratory during the late 1990's. These guidelinesmore » established criteria for performing Non-Destructive Examination (NDE), for acceptance of the NDE results, for waste chemistry control, and for monitoring the tanks. The environmental regulations mirror these requirements and allow for the tank integrity program to provide compliant storage of the tanks. Both sets of requirements provide additional guidance for the protection of ancillary equipment. CH2M HILL uses two methods of NDE: visual inspection and Ultrasonic Testing (UT). The visual inspection program examines the primary tank and secondary liner of the DST. The primary tank is examined both on the interior surface above the waste in the tank and on the exterior surface facing the annulus of the DST. The interior surface of the tank liner is examined at the same time as the outer surface of the primary tank. The UT program examines representative areas of the primary tank and secondary liner by deploying equipment in the annulus of the tank. Both programs have led to the development of new equipment for remote inspection of the tanks. Compact camera and enhanced lighting systems have been designed and deployed through narrow access ports (called risers) into the tanks. The UT program has designed two generations of crawlers and equipment for deployment through risers into the thermally hot and radioactive environment. Also extensions were developed to allow inspection of the tank's curve upper (haunch) and lower (knuckle) surfaces. CH2M HILL primarily maintains chemistry control of the DST by ensuring that the concentrations of hydroxide and nitrite ions are favorable with respect to the nitrate ion concentration in the waste. This control program is supported by an extensive sampling program that obtains samples from the supernatant and solid layers in the tank to ensure compliance with the chemical specification. At DOE direction, CH2M HILL has embarked on a waste chemistry optimization program to enhance the protection of the tank surface and the understanding of the parameters that affect general and localized corrosion in the tanks. Over the past decade, DOE has deployed Electrochemical Noise corrosion probes in the DST to monitor localized corrosion. From the information gathered as part of the chemistry control, new information has been identified about the parameters requiring control to ensure tank integrity. CH2M HILL is deploying a series of corrosion probes to test and employ these parameters to provide real time corrosion monitoring of the DSTs. (authors)« less

mTORC1 and p53

PubMed Central

Hasty, Paul; Sharp, Zelton Dave; Curiel, Tyler J.; Campisi, Judith

2013-01-01

A balance must be struck between cell growth and stress responses to ensure that cells proliferate without accumulating damaged DNA. This balance means that optimal cell proliferation requires the integration of pro-growth and stress-response pathways. mTOR (mechanistic target of rapamycin) is a pleiotropic kinase found in complex 1 (mTORC1). The mTORC1 pathway governs a response to mitogenic signals with high energy levels to promote protein synthesis and cell growth. In contrast, the p53 DNA damage response pathway is the arbiter of cell proliferation, restraining mTORC1 under conditions of genotoxic stress. Recent studies suggest a complicated integration of these pathways to ensure successful cell growth and proliferation without compromising genome maintenance. Deciphering this integration could be key to understanding the potential clinical usefulness of mTORC1 inhibitors like rapamycin. Here we discuss how these p53-mTORC1 interactions might play a role in the suppression of cancer and perhaps the development of cellular senescence and organismal aging. PMID:23255104

36 CFR 907.1 - Policy.

Code of Federal Regulations, 2014 CFR

2014-07-01

... systematic and timely approaches which will ensure the integrated use of the natural and social sciences and... projects implementing the Plan; (e) Invite the cooperation and encourage the participation, where...

36 CFR 907.1 - Policy.

Code of Federal Regulations, 2012 CFR

2012-07-01

... systematic and timely approaches which will ensure the integrated use of the natural and social sciences and... projects implementing the Plan; (e) Invite the cooperation and encourage the participation, where...

Bed Bug Tips

EPA Pesticide Factsheets

How to deal with bed bugs in one printable page. Ten tips include ensuring correct insect identification, reducing clutter, understand integrated pest management, using mattress and box spring encasements, and heat treatment.

32 CFR 245.3 - Responsibilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PLAN FOR THE EMERGENCY SECURITY CONTROL OF AIR TRAFFIC (ESCAT) General § 245.3 Responsibilities. The Assistant Secretary of Defense for Networks and Information Integration will ensure the responsibilities of...

32 CFR 245.3 - Responsibilities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... PLAN FOR THE EMERGENCY SECURITY CONTROL OF AIR TRAFFIC (ESCAT) General § 245.3 Responsibilities. The Assistant Secretary of Defense for Networks and Information Integration will ensure the responsibilities of...

32 CFR 245.3 - Responsibilities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... PLAN FOR THE EMERGENCY SECURITY CONTROL OF AIR TRAFFIC (ESCAT) General § 245.3 Responsibilities. The Assistant Secretary of Defense for Networks and Information Integration will ensure the responsibilities of...

32 CFR 245.3 - Responsibilities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... PLAN FOR THE EMERGENCY SECURITY CONTROL OF AIR TRAFFIC (ESCAT) General § 245.3 Responsibilities. The Assistant Secretary of Defense for Networks and Information Integration will ensure the responsibilities of...

Health Monitoring of Composite Material Structures using a Vibrometry Technique

NASA Technical Reports Server (NTRS)

Schulz, Mark J.

1997-01-01

Large composite material structures such as aircraft and Reusable Launch Vehicles (RLVS) operate in severe environments comprised of vehicle dynamic loads, aerodynamic loads, engine vibration, foreign object impact, lightning strikes, corrosion, and moisture absorption. These structures are susceptible to damage such as delamination, fiber breaking/pullout, matrix cracking, and hygrothermal strain. To ensure human safety and load-bearing integrity, these structures must be inspected to detect and locate often invisible damage and faults before becoming catastrophic. Moreover, nearly all future structures will need some type of in-service inspection technique to increase their useful life and reduce maintenance and overall costs. Possible techniques for monitoring the health and indicating damage on composite structures include: c-scan, thermography, acoustic emissions using piezoceramic actuators or fiber-optic wires with gratings, laser ultrasound, shearography, holography, x-ray, and others. These techniques have limitations in detecting damage that is beneath the surface of the structure, far away from a sensor location, or during operation of the vehicle. The objective of this project is to develop a more global method for damage detection that is based on structural dynamics principles, and can inspect for damage when the structure is subjected to vibratory loads to expose faults that may not be evident by static inspection. A Transmittance Function Monitoring (TFM) method is being developed in this project for ground-based inspection and operational health monitoring of large composite structures as a RLV. A comparison of the features of existing health monitoring approaches and the proposed TFM method is given.

Status of steam generator tubing integrity at Jaslovske Bohunice NPP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cepcek, S.

1997-02-01

Steam generator represents one of the most important component of nuclear power plants. Especially, loss of tubing integrity of steam generators can lead to the primary coolant leak to secondary circuit and in worse cases to the unit shut down or to the PTS events occurrence. Therefore, to ensure the steam generator tubing integrity and the current knowledge about tube degradation propagation and development is of the highest importance. In this paper the present status of steam generator tubing integrity in operated NPP in Slovak Republic is presented.

Functionally-fitted energy-preserving integrators for Poisson systems

NASA Astrophysics Data System (ADS)

Wang, Bin; Wu, Xinyuan

2018-07-01

In this paper, a new class of energy-preserving integrators is proposed and analysed for Poisson systems by using functionally-fitted technology. The integrators exactly preserve energy and have arbitrarily high order. It is shown that the proposed approach allows us to obtain the energy-preserving methods derived in [12] by Cohen and Hairer (2011) and in [1] by Brugnano et al. (2012) for Poisson systems. Furthermore, we study the sufficient conditions that ensure the existence of a unique solution and discuss the order of the new energy-preserving integrators.

Due diligence during the integration of physician groups.

PubMed

Ealey, Tom

2011-12-01

While contemplating physician group integration, providers should perform due diligence and ask questions in several key areas to ensure successful integrations: Financial--Is the group producing the revenue expected, and is the revenue cycle managed effectively? Statistical--What are the numbers of encounters, procedures, surgeries, and ancillaries? Compliance--Has the group developed and operated a sound compliance program, and has compliance been a priority? Succession--How many physicians are within three to five years of retirement?

Embedding Scientific Integrity and Ethics into the Scientific Process and Research Data Lifecycle

NASA Astrophysics Data System (ADS)

Gundersen, L. C.

2016-12-01

Predicting climate change, developing resources sustainably, and mitigating natural hazard risk are complex interdisciplinary challenges in the geosciences that require the integration of data and knowledge from disparate disciplines and scales. This kind of interdisciplinary science can only thrive if scientific communities work together and adhere to common standards of scientific integrity, ethics, data management, curation, and sharing. Science and data without integrity and ethics can erode the very fabric of the scientific enterprise and potentially harm society and the planet. Inaccurate risk analyses of natural hazards can lead to poor choices in construction, insurance, and emergency response. Incorrect assessment of mineral resources can bankrupt a company, destroy a local economy, and contaminate an ecosystem. This paper presents key ethics and integrity questions paired with the major components of the research data life cycle. The questions can be used by the researcher during the scientific process to help ensure the integrity and ethics of their research and adherence to sound data management practice. Questions include considerations for open, collaborative science, which is fundamentally changing the responsibility of scientists regarding data sharing and reproducibility. The publication of primary data, methods, models, software, and workflows must become a norm of science. There are also questions that prompt the scientist to think about the benefit of their work to society; ensuring equity, respect, and fairness in working with others; and always striving for honesty, excellence, and transparency.

Hybrid integration of laser source on silicon photonic integrated circuit for low-cost interferometry medical device

NASA Astrophysics Data System (ADS)

Duperron, Matthieu; Carroll, Lee; Rensing, Marc; Collins, Sean; Zhao, Yan; Li, Yanlu; Baets, Roel; O'Brien, Peter

2017-02-01

The cost-effective integration of laser sources on Silicon Photonic Integrated Circuits (Si-PICs) is a key challenge to realizing the full potential of on-chip photonic solutions for telecommunication and medical applications. Hybrid integration can offer a route to high-yield solutions, using only known-good laser-chips, and simple freespace micro-optics to transport light from a discrete laser-diode to a grating-coupler on the Si-PIC. In this work, we describe a passively assembled micro-optical bench (MOB) for the hybrid integration of a 1550nm 20MHz linewidth laser-diode on a Si-PIC, developed for an on-chip interferometer based medical device. A dual-lens MOB design minimizes aberrations in the laser spot transported to the standard grating-coupler (15 μm x 12 μm) on the Si-PIC, and facilitates the inclusion of a sub-millimeter latched-garnet optical-isolator. The 20dB suppression from the isolator helps ensure the high-frequency stability of the laser-diode, while the high thermal conductivity of the AlN submount (300/W=m.°C), and the close integration of a micro-bead thermistor, ensure the stable and efficient thermo-electric cooling of the laser-diode, which helps minimise low-frequency drift during the approximately 15s of operation needed for the point-of-care measurement. The dual-lens MOB is compatible with cost-effective passively-aligned mass-production, and can be optimised for alternative PIC-based applications.

Implementing Key Strategies for Successful Network Integration in the Quebec Substance-Use Disorders Programme

PubMed Central

Perreault, Michel; Grenier, Guy; Imboua, Armelle; Brochu, Serge

2016-01-01

Background: Fragmentation and lack of coordination often occur among organisations offering treatment for individuals with substance-use disorders. Better integration from a system perspective within a network of organisations offering substance-use disorder services can be developed using various integration strategies at the administrative and clinical levels. This study aims to identify integration strategies implemented in Quebec substance-use disorder networks and to assess their strengths and limitations. Methods: A total of 105 stakeholders representing two regions and four local substance-use disorder networks participated in focus groups or individual interviews. Thematic qualitative and descriptive quantitative analyses were conducted. Results: Six types of service integration strategies have been implemented to varying degrees in substance-use disorder networks. They are: 1) coordination activities-governance, 2) primary-care consolidation models, 3) information and monitoring management tools, 4) service coordination strategies, 5) clinical evaluation tools and 6) training activities. Conclusion: Important investments have been made in Quebec for the training and assessment of individuals with substance-use disorders, particularly in terms of support for emergency room liaison teams and the introduction of standardised clinical evaluation tools. However, the development of integration strategies was insufficient to ensure the implementation of successful networks. Planning, consolidation of primary care for substance-use disorders and systematic implementation of various clinical and administrative integration strategies are needed in order to ensure a better continuum of care for individuals with substance-use disorders. PMID:27616951

Analytical and Experimental Verification of a Flight Article for a Mach-8 Boundary-Layer Experiment

NASA Technical Reports Server (NTRS)

Richards, W. Lance; Monaghan, Richard C.

1996-01-01

Preparations for a boundary-layer transition experiment to be conducted on a future flight mission of the air-launched Pegasus(TM) rocket are underway. The experiment requires a flight-test article called a glove to be attached to the wing of the Mach-8 first-stage booster. A three-dimensional, nonlinear finite-element analysis has been performed and significant small-scale laboratory testing has been accomplished to ensure the glove design integrity and quality of the experiment. Reliance on both the analysis and experiment activities has been instrumental in the success of the flight-article design. Results obtained from the structural analysis and laboratory testing show that all glove components are well within the allowable thermal stress and deformation requirements to satisfy the experiment objectives.

Preparing health care organizations for successful case management programs.

PubMed

Bonvissuto, C A; Kastens, J M; Atwell, S R

1997-01-01

This article reports the results of a study of four hospital-based providers in varying stages of implementing case management programs. Three of the providers had most of the necessary elements in place to ensure success, such as a mix of reimbursement sources, an effective and integrated information management system, a full range of clinical services, and continuous quality improvement programs. The authors make several suggestions for key activities that must be pursued by any health care organization seeking to implement a case management program in an era of managed care, tightening reimbursement, and consumer demand for quality care. These include the need to (a) organize essential case management functions under a centralized structure; (b) set realistic, quantifiable targets, and (c) design a communications plan for the program.

Smurf2 Regulates DNA Repair and Packaging to Prevent Tumors | Center for Cancer Research

Cancer.gov

The blueprint for all of a cell’s functions is written in the genetic code of DNA sequences as well as in the landscape of DNA and histone modifications. DNA is wrapped around histones to package it into chromatin, which is stored in the nucleus. It is important to maintain the integrity of the chromatin structure to ensure that the cell continues to behave appropriately. Recently, Ying Zhang, Ph.D., Senior Investigator in CCR’s Laboratory of Cellular and Molecular Biology, and her colleagues showed that alterations in the organization of the DNA can lead to tumor growth in a variety of tissues. This study appeared in the February 2012 issue of Nature Medicine and was featured as a cover story of that issue.

Stabilisation of discrete-time polynomial fuzzy systems via a polynomial lyapunov approach

NASA Astrophysics Data System (ADS)

Nasiri, Alireza; Nguang, Sing Kiong; Swain, Akshya; Almakhles, Dhafer

2018-02-01

This paper deals with the problem of designing a controller for a class of discrete-time nonlinear systems which is represented by discrete-time polynomial fuzzy model. Most of the existing control design methods for discrete-time fuzzy polynomial systems cannot guarantee their Lyapunov function to be a radially unbounded polynomial function, hence the global stability cannot be assured. The proposed control design in this paper guarantees a radially unbounded polynomial Lyapunov functions which ensures global stability. In the proposed design, state feedback structure is considered and non-convexity problem is solved by incorporating an integrator into the controller. Sufficient conditions of stability are derived in terms of polynomial matrix inequalities which are solved via SOSTOOLS in MATLAB. A numerical example is presented to illustrate the effectiveness of the proposed controller.

[Development of a medical equipment support information system based on PDF portable document].

PubMed

Cheng, Jiangbo; Wang, Weidong

2010-07-01

According to the organizational structure and management system of the hospital medical engineering support, integrate medical engineering support workflow to ensure the medical engineering data effectively, accurately and comprehensively collected and kept in electronic archives. Analyse workflow of the medical, equipment support work and record all work processes by the portable electronic document. Using XML middleware technology and SQL Server database, complete process management, data calculation, submission, storage and other functions. The practical application shows that the medical equipment support information system optimizes the existing work process, standardized and digital, automatic and efficient orderly and controllable. The medical equipment support information system based on portable electronic document can effectively optimize and improve hospital medical engineering support work, improve performance, reduce costs, and provide full and accurate digital data

Systems Integration Challenges for a National Space Launch System

NASA Technical Reports Server (NTRS)

May, Todd A.

2011-01-01

System Integration was refined through the complexity and early failures experienced in rocket flight. System Integration encompasses many different viewpoints of the system development. System Integration must ensure consistency in development and operations activities. Human Space Flight tends toward large, complex systems. Understanding the system fs operational and use context is the guiding principle for System Integration: (1) Sizeable costs can be driven into systems by not fully understanding context (2). Adhering to the system context throughout the system fs life cycle is essential to maintaining efficient System Integration. System Integration exists within the System Architecture. Beautiful systems are simple in use and operation -- Block upgrades facilitate manageable steps in functionality evolution. Effective System Integration requires a stable system concept. Communication is essential to system simplicity

Earth & Space Science in the Next Generation Science Standards: Promise, Challenge, and Future Actions. (Invited)

NASA Astrophysics Data System (ADS)

Pyle, E. J.

2013-12-01

The Next Generation Science Standards (NGSS) are a step forward in ensuring that future generations of students become scientifically literate. The NGSS document builds from the National Science Education Standards (1996) and the National Assessment of Educational Progress (NAEP) science framework of 2005. Design teams for the Curriculum Framework for K-12 Science Education were to outline the essential content necessary for students' science literacy, considering the foundational knowledge and the structure of each discipline in the context of learning progressions. Once draft standards were developed, two issues emerged from their review: (a) the continual need to prune 'cherished ideas' within the content, such that only essential ideas were represented, and (b) the potential for prior conceptions of Science & Engineering Practices (SEP) and cross-cutting concepts (CCC) to limit overly constrain performance expectations. With the release of the NGSS, several challenges are emerging for geoscience education. First, the traditional emphasis of Earth science in middle school has been augmented by new standards for high school that require major syntheses of concepts. Second, the integration of SEPs into performance expectations places an increased burden on teachers and curriculum developers to organize instruction around the nature of inquiry in the geosciences. Third, work is needed to define CCCs in Earth contexts, such that the unique structure of the geosciences is best represented. To ensure that the Earth & Space Science standards are implemented through grade 12, two supporting structures must be developed. In the past, many curricular materials claimed that they adhered to the NSES, but in some cases this match was a simple word match or checklist that bore only superficial resemblance to the standards. The structure of the performance expectations is of sufficient sophistication to ensure that adherence to the standards more than a casual exercise. Claims of match must be supported not just by disciplinary core ideas, but also by SEPs and CCCs. Such a structured approach to Earth science instruction also requires specialized approaches to teacher preparation and professional development. Many teachers of Earth science are underprepared, and an examination of how Earth science teachers are prepared and supported to use to new curricular materials is also warranted. This presentation will (a) compare the structure of the NGSS and NSES for Earth & Space Science, (b) discuss the review of the NGSS drafts with respect to the intent of the Curriculum Framework, (c) provide definition to the particular challenges to instruction offered by the NGSS beyond prior instructional experience, and (d) define and reinforce concepts of what it means for curricula, instructional materials, and teacher preparation and professional development to be considered 'aligned' with the NGSS.

An efficient architecture for the integration of sensor and actuator networks into the future internet

NASA Astrophysics Data System (ADS)

Schneider, J.; Klein, A.; Mannweiler, C.; Schotten, H. D.

2011-08-01

In the future, sensors will enable a large variety of new services in different domains. Important application areas are service adaptations in fixed and mobile environments, ambient assisted living, home automation, traffic management, as well as management of smart grids. All these applications will share a common property, the usage of networked sensors and actuators. To ensure an efficient deployment of such sensor-actuator networks, concepts and frameworks for managing and distributing sensor data as well as for triggering actuators need to be developed. In this paper, we present an architecture for integrating sensors and actuators into the future Internet. In our concept, all sensors and actuators are connected via gateways to the Internet, that will be used as comprehensive transport medium. Additionally, an entity is needed for registering all sensors and actuators, and managing sensor data requests. We decided to use a hierarchical structure, comparable to the Domain Name Service. This approach realizes a cost-efficient architecture disposing of "plug and play" capabilities and accounting for privacy issues.

The nuclear lamina regulates germline stem cell niche organization via modulation of EGFR signaling.

PubMed

Chen, Haiyang; Chen, Xin; Zheng, Yixian

2013-07-03

Stem cell niche interactions have been studied extensively with regard to cell polarity and extracellular signaling. Less is known about the way in which signals and polarity cues integrate with intracellular structures to ensure appropriate niche organization and function. Here, we report that nuclear lamins function in the cyst stem cells (CySCs) of Drosophila testes to control the interaction of CySCs with the hub. This interaction is important for regulation of CySC differentiation and organization of the niche that supports the germline stem cells (GSCs). Lamin promotes nuclear retention of phosphorylated ERK in the CySC lineage by regulating the distribution of specific nucleoporins within the nuclear pores. Lamin-regulated nuclear epidermal growth factor (EGF) receptor signaling in the CySC lineage is essential for proliferation and differentiation of the GSCs and the transient amplifying germ cells. Thus, we have uncovered a role for the nuclear lamina in the integration of EGF signaling to regulate stem cell niche function. Copyright © 2013 Elsevier Inc. All rights reserved.

Parasites, proteomes and systems: has Descartes' clock run out of time?

PubMed

Wastling, J M; Armstrong, S D; Krishna, R; Xia, D

2012-08-01

Systems biology aims to integrate multiple biological data types such as genomics, transcriptomics and proteomics across different levels of structure and scale; it represents an emerging paradigm in the scientific process which challenges the reductionism that has dominated biomedical research for hundreds of years. Systems biology will nevertheless only be successful if the technologies on which it is based are able to deliver the required type and quality of data. In this review we discuss how well positioned is proteomics to deliver the data necessary to support meaningful systems modelling in parasite biology. We summarise the current state of identification proteomics in parasites, but argue that a new generation of quantitative proteomics data is now needed to underpin effective systems modelling. We discuss the challenges faced to acquire more complete knowledge of protein post-translational modifications, protein turnover and protein-protein interactions in parasites. Finally we highlight the central role of proteome-informatics in ensuring that proteomics data is readily accessible to the user-community and can be translated and integrated with other relevant data types.

NASA's first Orion full-scale abort flight test crew module was placed in NASA Dryden's Abort Flight Test integration area for equipment installation.

NASA Image and Video Library

2008-04-01

A full-scale flight-test mockup of the Constellation program's Orion crew vehicle arrived at NASA's Dryden Flight Research Center in late March 2008 to undergo preparations for the first short-range flight test of the spacecraft's astronaut escape system later that year. Engineers and technicians at NASA's Langley Research Center fabricated the structure, which precisely represents the size, outer shape and mass characteristics of the Orion space capsule. The Orion crew module mockup was ferried to NASA Dryden on an Air Force C-17. After painting in the Edwards Air Force Base paint hangar, the conical capsule was taken to Dryden for installation of flight computers, instrumentation and other electronics prior to being sent to the U.S. Army's White Sands Missile Range in New Mexico for integration with the escape system and the first abort flight test in late 2008. The tests were designed to ensure a safe, reliable method of escape for astronauts in case of an emergency.

Parasites, proteomes and systems: has Descartes’ clock run out of time?

PubMed Central

WASTLING, J. M.; ARMSTRONG, S. D.; KRISHNA, R.; XIA, D.

2012-01-01

SUMMARY Systems biology aims to integrate multiple biological data types such as genomics, transcriptomics and proteomics across different levels of structure and scale; it represents an emerging paradigm in the scientific process which challenges the reductionism that has dominated biomedical research for hundreds of years. Systems biology will nevertheless only be successful if the technologies on which it is based are able to deliver the required type and quality of data. In this review we discuss how well positioned is proteomics to deliver the data necessary to support meaningful systems modelling in parasite biology. We summarise the current state of identification proteomics in parasites, but argue that a new generation of quantitative proteomics data is now needed to underpin effective systems modelling. We discuss the challenges faced to acquire more complete knowledge of protein post-translational modifications, protein turnover and protein-protein interactions in parasites. Finally we highlight the central role of proteome-informatics in ensuring that proteomics data is readily accessible to the user-community and can be translated and integrated with other relevant data types. PMID:22828391

Microassembly of Heterogeneous Materials using Transfer Printing and Thermal Processing

PubMed Central

Keum, Hohyun; Yang, Zining; Han, Kewen; Handler, Drew E.; Nguyen, Thong Nhu; Schutt-Aine, Jose; Bahl, Gaurav; Kim, Seok

2016-01-01

Enabling unique architectures and functionalities of microsystems for numerous applications in electronics, photonics and other areas often requires microassembly of separately prepared heterogeneous materials instead of monolithic microfabrication. However, microassembly of dissimilar materials while ensuring high structural integrity has been challenging in the context of deterministic transferring and joining of materials at the microscale where surface adhesion is far more dominant than body weight. Here we present an approach to assembling microsystems with microscale building blocks of four disparate classes of device-grade materials including semiconductors, metals, dielectrics, and polymers. This approach uniquely utilizes reversible adhesion-based transfer printing for material transferring and thermal processing for material joining at the microscale. The interfacial joining characteristics between materials assembled by this approach are systematically investigated upon different joining mechanisms using blister tests. The device level capabilities of this approach are further demonstrated through assembling and testing of a microtoroid resonator and a radio frequency (RF) microelectromechanical systems (MEMS) switch that involve optical and electrical functionalities with mechanical motion. This work opens up a unique route towards 3D heterogeneous material integration to fabricate microsystems. PMID:27427243

A starting point for delivery reform. Catholic healthcare providers can receive guidance from "A Time to Be Old, a Time to Flourish".

PubMed

1992-03-01

The ideal healthcare delivery system is client focused and ensures that the individual and the family receive the appropriate mix of services to meet their needs. Healthcare delivery should be presented as a coordinated continuum of care. Key integrating elements are essential to provide healthcare services on a day-by-day basis as a continuum of care. Integrating elements that form the bridge between clients and services include planning, care management, a management information system, financing, and an appropriate administrative structure. Many Catholic healthcare providers are expanding by acquiring a variety of services. However, many of these acquisitions are in response to today's competitive environment, whereas a true continuum of care must focus on the client's range of functional needs. Catholic providers must keep in mind that not all services they provide will be profitable. Although Catholic healthcare providers will be pressured to focus on fiscal strength and market position, they must put the client's holistic needs first. By doing so, they can help create a client-centered healthcare system in their communities.

A multifunctional biphasic water splitting catalyst tailored for integration with high-performance semiconductor photoanodes

DOE PAGES

Yang, Jinhui; Cooper, Jason K.; Toma, Francesca M.; ...

2016-11-07

Artificial photosystems are advanced by the development of conformal catalytic materials that promote desired chemical transformations, while also maintaining stability and minimizing parasitic light absorption for integration on surfaces of semiconductor light absorbers. We demonstrate that multifunctional, nanoscale catalysts that enable high-performance photoelectrochemical energy conversion can be engineered by plasma-enhanced atomic layer deposition. The collective properties of tailored Co 3 O 4 /Co(OH) 2 thin films simultaneously provide high activity for water splitting, permit efficient interfacial charge transport from semiconductor substrates, and enhance durability of chemically sensitive interfaces. Furthermore, these films comprise compact and continuous nanocrystalline Co 3 O 4more » spinel that is impervious to phase transformation and impermeable to ions, thereby providing effective protection of the underlying substrate. Moreover, a secondary phase of structurally disordered and chemically labile Co(OH) 2 is introduced to ensure a high concentration of catalytically active sites. Application of this coating to photovoltaic p + n-Si junctions yields best reported performance characteristics for crystalline Si photoanodes.« less

14 CFR 1216.102 - Policy.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) Use systematic and timely approaches which will ensure the integrated use of the natural and social sciences and environmental design arts in planning and decisionmaking for actions which may have an impact...

14 CFR 1216.102 - Policy.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) Use systematic and timely approaches which will ensure the integrated use of the natural and social sciences and environmental design arts in planning and decisionmaking for actions which may have an impact...

14 CFR 1216.102 - Policy.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) Use systematic and timely approaches which will ensure the integrated use of the natural and social sciences and environmental design arts in planning and decisionmaking for actions which may have an impact...

CCCT - Patient Advocate Steering Committee

Cancer.gov

The Patient Advocate Steering Committee (PASC) works to ensure advocates involved with the Scientific Steering Committees (SSCs) are completely integrated in the development, implementation, and monitoring of clinical trials within those groups.

13 CFR 400.206 - Environmental requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... other cases, potentially affect: (A) A floodplain; (B) A wetland; (C) Important farmlands, or prime... approach that will ensure the integrated use of the natural and social sciences and the environmental...

13 CFR 400.206 - Environmental requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... other cases, potentially affect: (A) A floodplain; (B) A wetland; (C) Important farmlands, or prime... approach that will ensure the integrated use of the natural and social sciences and the environmental...

Smart cities of the future

NASA Astrophysics Data System (ADS)

Batty, M.; Axhausen, K. W.; Giannotti, F.; Pozdnoukhov, A.; Bazzani, A.; Wachowicz, M.; Ouzounis, G.; Portugali, Y.

2012-11-01

Here we sketch the rudiments of what constitutes a smart city which we define as a city in which ICT is merged with traditional infrastructures, coordinated and integrated using new digital technologies. We first sketch our vision defining seven goals which concern: developing a new understanding of urban problems; effective and feasible ways to coordinate urban technologies; models and methods for using urban data across spatial and temporal scales; developing new technologies for communication and dissemination; developing new forms of urban governance and organisation; defining critical problems relating to cities, transport, and energy; and identifying risk, uncertainty, and hazards in the smart city. To this, we add six research challenges: to relate the infrastructure of smart cities to their operational functioning and planning through management, control and optimisation; to explore the notion of the city as a laboratory for innovation; to provide portfolios of urban simulation which inform future designs; to develop technologies that ensure equity, fairness and realise a better quality of city life; to develop technologies that ensure informed participation and create shared knowledge for democratic city governance; and to ensure greater and more effective mobility and access to opportunities for urban populations. We begin by defining the state of the art, explaining the science of smart cities. We define six scenarios based on new cities badging themselves as smart, older cities regenerating themselves as smart, the development of science parks, tech cities, and technopoles focused on high technologies, the development of urban services using contemporary ICT, the use of ICT to develop new urban intelligence functions, and the development of online and mobile forms of participation. Seven project areas are then proposed: Integrated Databases for the Smart City, Sensing, Networking and the Impact of New Social Media, Modelling Network Performance, Mobility and Travel Behaviour, Modelling Urban Land Use, Transport and Economic Interactions, Modelling Urban Transactional Activities in Labour and Housing Markets, Decision Support as Urban Intelligence, Participatory Governance and Planning Structures for the Smart City. Finally we anticipate the paradigm shifts that will occur in this research and define a series of key demonstrators which we believe are important to progressing a science of smart cities.

Physiologically Low Oxygen Enhances Biomolecule Production and Stemness of Mesenchymal Stem Cell Spheroids

PubMed Central

Shearier, Emily; Xing, Qi; Qian, Zichen

2016-01-01

Multicellular human mesenchymal stem cell (hMSC) spheroids have been demonstrated to be valuable in a variety of applications, including cartilage regeneration, wound healing, and neoangiogenesis. Physiological relevant low oxygen culture can significantly improve in vitro hMSC expansion by preventing cell differentiation. We hypothesize that hypoxia-cultured hMSC spheroids can better maintain the regenerative properties of hMSCs. In this study, hMSC spheroids were fabricated using hanging drop method and cultured under 2% O2 and 20% O2 for up to 96 h. Spheroid diameter and viability were examined, as well as extracellular matrix (ECM) components and growth factor levels between the two oxygen tensions at different time points. Stemness was measured among the spheroid culture conditions and compared to two-dimensional cell cultures. Spheroid viability and structural integrity were studied using different needle gauges to ensure no damage would occur when implemented in vivo. Spheroid attachment and integration within a tissue substitute were also demonstrated. The results showed that a three-dimensional hMSC spheroid cultured at low oxygen conditions can enhance the production of ECM proteins and growth factors, while maintaining the spheroids' stemness and ability to be injected, attached, and potentially be integrated within a tissue. PMID:26830500

Report of Best Practice: Development of an Ethics Manual as an Integral Component of Undergraduate Curriculum and Application for Graduates and Practitioners

ERIC Educational Resources Information Center

Angel, Lyndall Annette; Simpson, Maree Donna

2007-01-01

An ethics manual to support undergraduate lectures or practitioners in a healthcare environment has been developed. The manual was developed from course materials designed to ensure an integrated approach throughout a four year pharmacy program as teaching professionalism, as well as professional ethics, has become increasingly important and a…

Planning and Instruction and the Social Studies Curriculum: A Discourse on Design and Delivery Systems.

ERIC Educational Resources Information Center

Peters, Richard

A model for Continuous-Integrated-Sequential (C/I/S) curricula for social studies education is presented. The design advocated involves ensuring continuity of instruction from grades K-12, an integration of social studies disciplines, and a sequential process of refining and reinforcing concept and skills from grade-to-grade along the K-12…

Fostering Students' 21st Century Skills through Project Oriented Problem Based Learning (POPBL) in Integrated STEM Education Program

ERIC Educational Resources Information Center

Wan Husin, Wan Nor Fadzilah; Mohamad Arsad, Nurazidawati; Othman, Oziah; Halim, Lilia; Rasul, Mohamad Sattar; Osman, Kamisah; Iksan, Zanaton

2016-01-01

Students nowadays need to be equipped with twenty first century skills in order to ensure their competitiveness in this era of globalization, especially in the science and technology sector. Therefore, this study aimed to identify the changes of 21st century skills among students after participating in an integrated Science, Technology,…

76 FR 41135 - 2-Propenoic acid, 2-methyl-, phenylmethyl ester, polymer with 2-propenoic acid and sodium 2...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-13

... a finite tolerance is not necessary to ensure that there is a reasonable certainty that no harm will... integral part of its composition the atomic elements carbon, hydrogen, and oxygen. 3. The polymer does not contain as an integral part of its composition, except as impurities, any element other than those listed...

The 21st-Century Principal: A Correlational Study of Technology Leadership and Technology Integration in Texas K-12 Schools

ERIC Educational Resources Information Center

Fisher, Donna Marie

2013-01-01

Technology leadership by campus administrators is crucial for the effective integration of technology in the classroom; however, a comprehensive review of the existing research reveals a gap in this field. Scholarly research helps inform educational practice and contributes to the development of standards that ensure current and future school…

Integrating International Engineering Organizations For Successful ISS Operations

NASA Technical Reports Server (NTRS)

Blome, Elizabeth; Duggan, Matt; Patten, L.; Pieterek, Hhtrud

2006-01-01

The International Space Station (ISS) is a multinational orbiting space laboratory that is built in cooperation with 16 nations. The design and sustaining engineering expertise is spread worldwide. As the number of Partners with orbiting elements on the ISS grows, the challenge NASA is facing as the ISS integrator is to ensure that engineering expertise and data are accessible in a timely fashion to ensure ongoing operations and mission success. Integrating international engineering teams requires definition and agreement on common processes and responsibilities, joint training and the emergence of a unique engineering team culture. ISS engineers face daunting logistical and political challenges regarding data sharing requirements. To assure systematic information sharing and anomaly resolution of integrated anomalies, the ISS Partners are developing multi-lateral engineering interface procedures. Data sharing and individual responsibility are key aspects of this plan. This paper describes several examples of successful multilateral anomaly resolution. These successes were used to form the framework of the Partner to Partner engineering interface procedures, and this paper describes those currently documented multilateral engineering processes. Furthermore, it addresses the challenges experienced to date, and the forward work expected in establishing a successful working relationship with Partners as their hardware is launched.

Optical network of silicon micromachined sensors

NASA Astrophysics Data System (ADS)

Wilson, Mark L.; Burns, David W.; Zook, J. David

1996-03-01

The Honeywell Technology Center, in collaboration with the University of Wisconsin and the Mobil Corporation, and under funding from this ARPA sponsored program, are developing a new type of `hybrid' micromachined silicon/fiber optic sensor that utilizes the best attributes of each technology. Fiber optics provide a noise free method to read out the sensor without electrical power required at the measurement point. Micromachined silicon sensor techniques provide a method to design many different types of sensors such as temperature, pressure, acceleration, or magnetic field strength and report the sensor data using FDM methods. Our polysilicon resonant microbeam structures have a built in Fabry-Perot interferometer that offers significant advantages over other configurations described in the literature. Because the interferometer is an integral part of the structure, the placement of the fiber becomes non- critical, and packaging issues become considerably simpler. The interferometer spacing are determined by the thin-film fabrication processes and therefore can be extremely well controlled. The main advantage, however, is the integral vacuum cavity that ensures high Q values. Testing results have demonstrated relaxed alignment tolerances in packaging these devices, with an excellent Signal to Noise Ratio. Networks of 16 or more sensors are currently being developed. STORM (Strain Transduction by Optomechanical Resonant Microbeams) sensors can also provide functionality and self calibration information which can be used to improve the overall system reliability. Details of the sensor and network design, as well as test results, are presented.

Structural Analysis Using Computer Based Methods

NASA Technical Reports Server (NTRS)

Dietz, Matthew R.

2013-01-01

The stiffness of a flex hose that will be used in the umbilical arms of the Space Launch Systems mobile launcher needed to be determined in order to properly qualify ground umbilical plate behavior during vehicle separation post T-0. This data is also necessary to properly size and design the motors used to retract the umbilical arms. Therefore an experiment was created to determine the stiffness of the hose. Before the test apparatus for the experiment could be built, the structure had to be analyzed to ensure it would not fail under given loading conditions. The design model was imported into the analysis software and optimized to decrease runtime while still providing accurate restlts and allow for seamless meshing. Areas exceeding the allowable stresses in the structure were located and modified before submitting the design for fabrication. In addition, a mock up of a deep space habitat and the support frame was designed and needed to be analyzed for structural integrity under different loading conditions. The load cases were provided by the customer and were applied to the structure after optimizing the geometry. Once again, weak points in the structure were located and recommended design changes were made to the customer and the process was repeated until the load conditions were met without exceeding the allowable stresses. After the stresses met the required factors of safety the designs were released for fabrication.

14 CFR § 1216.102 - Policy.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) Use systematic and timely approaches which will ensure the integrated use of the natural and social sciences and environmental design arts in planning and decisionmaking for actions which may have an impact...

An Assessment of Integrated Health Management (IHM) Frameworks

DOE Office of Scientific and Technical Information (OSTI.GOV)

N. Lybeck; M. Tawfik; L. Bond

In order to meet the ever increasing demand for energy, the United States nuclear industry is turning to life extension of existing nuclear power plants (NPPs). Economically ensuring the safe, secure, and reliable operation of aging nuclear power plants presents many challenges. The 2009 Light Water Reactor Sustainability Workshop identified online monitoring of active and structural components as essential to the better understanding and management of the challenges posed by aging nuclear power plants. Additionally, there is increasing adoption of condition-based maintenance (CBM) for active components in NPPs. These techniques provide a foundation upon which a variety of advanced onlinemore » surveillance, diagnostic, and prognostic techniques can be deployed to continuously monitor and assess the health of NPP systems and components. The next step in the development of advanced online monitoring is to move beyond CBM to estimating the remaining useful life of active components using prognostic tools. Deployment of prognostic health management (PHM) on the scale of a NPP requires the use of an integrated health management (IHM) framework - a software product (or suite of products) used to manage the necessary elements needed for a complete implementation of online monitoring and prognostics. This paper provides a thoughtful look at the desirable functions and features of IHM architectures. A full PHM system involves several modules, including data acquisition, system modeling, fault detection, fault diagnostics, system prognostics, and advisory generation (operations and maintenance planning). The standards applicable to PHM applications are indentified and summarized. A list of evaluation criteria for PHM software products, developed to ensure scalability of the toolset to an environment with the complexity of a NPP, is presented. Fourteen commercially available PHM software products are identified and classified into four groups: research tools, PHM system development tools, deployable architectures, and peripheral tools.« less

PR-Set7 is degraded in a conditional Cul4A transgenic mouse model of lung cancer

DOE PAGES

Wang, Yang; Xu, Zhidong; Mao, Jian -Hua; ...

2015-06-01

Background and objective. Maintenance of genomic integrity is essential to ensure normal organismal development and to prevent diseases such as cancer. PR-Set7 (also known as Set8) is a cell cycle regulated enzyme that catalyses monomethylation of histone 4 at Lys20 (H4K20me1) to promote chromosome condensation and prevent DNA damage. Recent studies show that CRL4CDT2-mediated ubiquitylation of PR-Set7 leads to its degradation during S phase and after DNA damage. This might occur to ensure appropriate changes in chromosome structure during the cell cycle or to preserve genome integrity after DNA damage. Methods. We developed a new model of lung tumor developmentmore » in mice harboring a conditionally expressed allele of Cul4A. We have therefore used a mouse model to demonstrate for the first time that Cul4A is oncogenic in vivo. With this model, staining of PR-Set7 in the preneoplastic and tumor lesions in AdenoCre-induced mouse lungs was performed. Meanwhile we identified higher protein level changes of γ-tubulin and pericentrin by IHC. Results. The level of PR-Set7 down-regulated in the preneoplastic and adenocarcinomous lesions following over-expression of Cul4A. We also identified higher levels of the proteins pericentrin and γ-tubulin in Cul4A mouse lungs induced by AdenoCre. Conclusion. PR-Set7 is a direct target of Cul4A for degradation and involved in the formation of lung tumors in the conditional Cul4A transgenic mouse model.« less

PR-Set7 is degraded in a conditional Cul4A transgenic mouse model of lung cancer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Yang; Xu, Zhidong; Mao, Jian -Hua

Background and objective. Maintenance of genomic integrity is essential to ensure normal organismal development and to prevent diseases such as cancer. PR-Set7 (also known as Set8) is a cell cycle regulated enzyme that catalyses monomethylation of histone 4 at Lys20 (H4K20me1) to promote chromosome condensation and prevent DNA damage. Recent studies show that CRL4CDT2-mediated ubiquitylation of PR-Set7 leads to its degradation during S phase and after DNA damage. This might occur to ensure appropriate changes in chromosome structure during the cell cycle or to preserve genome integrity after DNA damage. Methods. We developed a new model of lung tumor developmentmore » in mice harboring a conditionally expressed allele of Cul4A. We have therefore used a mouse model to demonstrate for the first time that Cul4A is oncogenic in vivo. With this model, staining of PR-Set7 in the preneoplastic and tumor lesions in AdenoCre-induced mouse lungs was performed. Meanwhile we identified higher protein level changes of γ-tubulin and pericentrin by IHC. Results. The level of PR-Set7 down-regulated in the preneoplastic and adenocarcinomous lesions following over-expression of Cul4A. We also identified higher levels of the proteins pericentrin and γ-tubulin in Cul4A mouse lungs induced by AdenoCre. Conclusion. PR-Set7 is a direct target of Cul4A for degradation and involved in the formation of lung tumors in the conditional Cul4A transgenic mouse model.« less